| <?xml version="1.0" encoding="utf-8"?> |
| <!-- |
| /* |
| ** Copyright 2013, The Android Open Source Project |
| ** |
| ** Licensed under the Apache License, Version 2.0 (the "License"); |
| ** you may not use this file except in compliance with the License. |
| ** You may obtain a copy of the License at |
| ** |
| ** http://www.apache.org/licenses/LICENSE-2.0 |
| ** |
| ** Unless required by applicable law or agreed to in writing, software |
| ** distributed under the License is distributed on an "AS IS" BASIS, |
| ** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| ** See the License for the specific language governing permissions and |
| ** limitations under the License. |
| */ |
| --> |
| |
| <resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2"> |
| <!-- Hardware keys present on the device, stored as a bit field. |
| This integer should equal the sum of the corresponding value for each |
| of the following keys present: |
| 1 - Home |
| 2 - Back |
| 4 - Menu |
| 8 - Assistant (search) |
| 16 - App switch |
| 32 - Camera |
| 64 - Volume rocker |
| For example, a device with Home, Back and Menu keys would set this |
| config to 7. --> |
| <!-- <integer name="config_deviceHardwareKeys">96</integer> --> |
| |
| <!-- Whether a software navigation bar should be shown. NOTE: in the future this may be |
| autodetected from the Configuration. --> |
| <bool name="config_showNavigationBar">true</bool> |
| |
| <!-- Boolean indicating whether the wifi chipset has dual frequency band support --> |
| <bool translatable="false" name="config_wifi_dual_band_support">true</bool> |
| |
| <!-- Boolean indicating whether the wifi chipset has background scan support --> |
| <bool translatable="false" name="config_wifi_background_scan_support">true</bool> |
| |
| <!-- Wifi driver supports batched scan --> |
| <bool translatable="false" name="config_wifi_batched_scan_supported">true</bool> |
| |
| <!-- Flag indicating whether the we should enable the automatic brightness in Settings. |
| Software implementation will be used if config_hardware_auto_brightness_available is not set --> |
| <bool name="config_automatic_brightness_available">true</bool> |
| |
| <!-- Array of light sensor LUX values to define our levels for auto backlight brightness support. |
| The N entries of this array define N 1 zones as follows: |
| |
| Zone 0: 0 <= LUX < array[0] |
| Zone 1: array[0] <= LUX < array[1] |
| ... |
| Zone N: array[N - 1] <= LUX < array[N] |
| Zone N + 1 array[N] <= LUX < infinity |
| |
| Must be overridden in platform specific overlays --> |
| <integer-array name="config_autoBrightnessLevels"> |
| <item>5</item> |
| <item>15</item> |
| <item>50</item> |
| <item>100</item> |
| <item>200</item> |
| <item>400</item> |
| <item>1000</item> |
| <item>2000</item> |
| <item>3000</item> |
| <item>5000</item> |
| <item>10000</item> |
| <item>30000</item> |
| </integer-array> |
| |
| <!-- Array of output values for LCD backlight corresponding to the LUX values |
| in the config_autoBrightnessLevels array. This array should have size one greater |
| than the size of the config_autoBrightnessLevels array. |
| This must be overridden in platform specific overlays --> |
| <integer-array name="config_autoBrightnessLcdBacklightValues"> |
| <item>11</item> <!-- 0-5 --> |
| <item>18</item> <!-- 5-15 --> |
| <item>27</item> <!-- 15-50 --> |
| <item>38</item> <!-- 50-100 --> |
| <item>48</item> <!-- 100-200 --> |
| <item>55</item> <!-- 200-400 --> |
| <item>64</item> <!-- 400-1000 --> |
| <item>74</item> <!-- 1000-2000 --> |
| <item>120</item> <!-- 2000-3000 --> |
| <item>164</item> <!-- 3000-5000 --> |
| <item>225</item> <!-- 5000-10000 --> |
| <item>255</item> <!-- 10000-30000 --> |
| <item>255</item> <!-- 30000+ --> |
| </integer-array> |
| |
| <!-- This string array should be overridden by the device to present a list of network |
| attributes. This is used by the connectivity manager to decide which networks can coexist |
| based on the hardware --> |
| <!-- An Array of "[Connection name],[ConnectivityManager.TYPE_xxxx], |
| [associated radio-type],[priority],[restoral-timer(ms)],[dependencyMet] --> |
| <!-- the 5th element "resore-time" indicates the number of milliseconds to delay |
| before automatically restore the default connection. Set -1 if the connection |
| does not require auto-restore. --> |
| <!-- the 6th element indicates boot-time dependency-met value. --> |
| <string-array translatable="false" name="networkAttributes"> |
| <item>"wifi,1,1,1,-1,true"</item> |
| <item>"mobile,0,0,0,-1,true"</item> |
| <item>"mobile_mms,2,0,4,60000,true"</item> |
| <item>"mobile_supl,3,0,2,60000,true"</item> |
| <item>"mobile_dun,4,0,2,60000,true"</item> |
| <item>"mobile_hipri,5,0,3,60000,true"</item> |
| <item>"mobile_fota,10,0,2,60000,true"</item> |
| <item>"mobile_ims,11,0,2,60000,true"</item> |
| <item>"mobile_cbs,12,0,2,60000,true"</item> |
| <item>"mobile_ia,14,0,2,-1,true"</item> |
| <item>"bluetooth,7,7,2,-1,true"</item> |
| <item>"ethernet,9,9,9,-1,true"</item> |
| </string-array> |
| |
| <!-- This string array should be overridden by the device to present a list of radio |
| attributes. This is used by the connectivity manager to decide which networks can coexist |
| based on the hardware --> |
| <!-- An Array of "[ConnectivityManager connectionType], |
| [# simultaneous connection types]" --> |
| <string-array translatable="false" name="radioAttributes"> |
| <item>"1,1"</item> |
| <item>"0,1"</item> |
| <item>"7,1"</item> |
| </string-array> |
| |
| <!-- List of regexpressions describing the interface (if any) that represent tetherable |
| USB interfaces. If the device doesn't want to support tething over USB this should |
| be empty. An example would be "usb.*" --> |
| <string-array translatable="false" name="config_tether_usb_regexs"> |
| <item>"usb\\d"</item> |
| <item>"rndis\\d"</item> |
| </string-array> |
| |
| <!-- List of regexpressions describing the interface (if any) that represent tetherable |
| Wifi interfaces. If the device doesn't want to support tethering over Wifi this |
| should be empty. An example would be "softap.*" --> |
| <string-array translatable="false" name="config_tether_wifi_regexs"> |
| <item>"wlan0"</item> |
| </string-array> |
| |
| <!-- List of regexpressions describing the interface (if any) that represent tetherable |
| bluetooth interfaces. If the device doesn't want to support tethering over bluetooth this |
| should be empty. --> |
| <string-array translatable="false" name="config_tether_bluetooth_regexs"> |
| <item>"bnep\\d"</item> |
| <item>"bt-pan"</item> |
| </string-array> |
| |
| <!-- Array of ConnectivityManager.TYPE_xxxx values allowable for tethering --> |
| <!-- Common options are [1, 4] for TYPE_WIFI and TYPE_MOBILE_DUN or |
| <!== [0,1,5,7] for TYPE_MOBILE, TYPE_WIFI, TYPE_MOBILE_HIPRI and TYPE_BLUETOOTH --> |
| <integer-array translatable="false" name="config_tether_upstream_types"> |
| <item>0</item> |
| <item>1</item> |
| <item>4</item> |
| <item>5</item> |
| <item>7</item> |
| </integer-array> |
| |
| <!-- Boolean indicddating if restoring network selection should be skipped --> |
| <!-- The restoring is handled by modem if it is true --> |
| <bool translatable="false" name="skip_restoring_network_selection">true</bool> |
| |
| <!-- If this is true, the screen will come on when you unplug usb/power/whatever. --> |
| <bool name="config_unplugTurnsOnScreen">true</bool> |
| |
| <bool name="config_enableWifiDisplay">true</bool> |
| |
| <!-- Set to true if the wifi display supports compositing content stored |
| in gralloc protected buffers. For this to be true, there must exist |
| a protected hardware path for surface flinger to composite and send |
| protected buffers to the wifi display video encoder. |
| |
| If this flag is false, we advise applications not to use protected |
| buffers (if possible) when presenting content to a wifi display because |
| the content may be blanked. |
| |
| This flag controls whether the {@link Display#FLAG_SUPPORTS_PROTECTED_BUFFERS} |
| flag is set for wifi displays. |
| --> |
| <bool name="config_wifiDisplaySupportsProtectedBuffers">true</bool> |
| |
| <!-- Is the notification LED intrusive? Used to decide if there should be a disable option --> |
| <bool name="config_intrusiveNotificationLed">true</bool> |
| |
| <!-- Is the battery LED intrusive? Used to decide if there should be a disable option --> |
| <!-- <bool name="config_intrusiveBatteryLed">true</bool> --> |
| |
| <!-- Setting this true forces the headset jack switches to use the/dev/input/event subsystem |
| rather than the uevent framework. --> |
| <bool name="config_useDevInputEventForAudioJack">true</bool> |
| |
| <!-- Indicate whether to allow the device to suspend when the screen is off |
| due to the proximity sensor. This resource should only be set to true |
| if the sensor HAL correctly handles the proximity sensor as a wake-up source. |
| Otherwise, the device may fail to wake out of suspend reliably. |
| The default is false. --> |
| <bool name="config_suspendWhenScreenOffDueToProximity">true</bool> |
| |
| <!-- Maximum number of supported users --> |
| <integer name="config_multiuserMaximumUsers">4</integer> |
| <!-- Whether Multiuser UI should be shown --> |
| <bool name="config_enableMultiUserUI">true</bool> |
| |
| <string-array name="config_mobile_tcp_buffers"> |
| <item>"lte:2097152,4194304,8388608,262144,524288,1048576"</item> |
| <item>"lte_ca:2097152,4194304,8388608,262144,524288,1048576"</item> |
| <item>"umts:4094,87380,1220608,4096,16384,1220608"</item> |
| <item>"hspa:4094,87380,1220608,4096,16384,1220608"</item> |
| <item>"hsupa:4094,87380,1220608,4096,16384,1220608"</item> |
| <item>"hsdpa:4094,87380,2441216,4096,16384,2441216"</item> |
| <item>"hspap:4094,87380,1220608,4096,16384,1220608"</item> |
| <item>"edge:4093,26280,35040,4096,16384,35040"</item> |
| <item>"gprs:4092,8760,11680,4096,8760,11680"</item> |
| <item>"evdo:4094,87380,1048576,4096,16384,262144"</item> |
| <item>"ehrpd:4094,87380,1048576,4096,16384,262144"</item> |
| </string-array> |
| |
| <!-- Doze mode --> |
| <string name="config_dozeComponent">com.android.systemui/com.android.systemui.doze.DozeService</string> |
| <integer name="config_screenBrightnessDoze">5</integer> |
| <bool name="config_dozeAfterScreenOff">true</bool> |
| <bool name="config_powerDecoupleInteractiveModeFromDisplay">true</bool> |
| |
| <!-- Enable doze powersaving --> |
| <bool name="config_enableAutoPowerModes">true</bool> |
| |
| <!-- Control whether Night display is available. This should only be enabled on devices |
| with HWC 2.0 or higher. --> |
| <bool name="config_nightDisplayAvailable">true</bool> |
| |
| <!-- Configure wifi tcp buffersizes in the form: |
| rmem_min,rmem_def,rmem_max,wmem_min,wmem_def,wmem_max --> |
| <string name="config_wifi_tcp_buffers" translatable="false">524288,2097152,4194304,262144,524288,1048576</string> |
| |
| <!-- Operating voltage for bluetooth controller. 0 by default--> |
| <integer translatable="false" name="config_bluetooth_operating_voltage_mv">3700</integer> |
| |
| <!-- Configuration to support SIM contact batch operation --> |
| <!-- <bool name="config_sim_phonebook_batch_operation">false</bool> --> |
| |
| <!-- The RadioAccessFamilies supported by the device. |
| Empty is viewed as "all". Only used on devices which |
| don't support RIL_REQUEST_GET_RADIO_CAPABILITY |
| format is UMTS|LTE|... --> |
| <string name="config_radio_access_family">GPRS|EDGE|UMTS|HSDPA|HSUPA|HSPA|LTE|HSPAP|GSM|TD_SCDMA|WCDMA|LTE_CA</string> |
| |
| <!-- ImsService package name to bind to by default, if config_dynamic_bind_ims is true --> |
| <string name="config_ims_package">org.codeaurora.ims</string> |
| |
| <!-- Flag specifying whether or not IMS will use the ImsResolver dynamically --> |
| <bool name="config_dynamic_bind_ims">true</bool> |
| |
| <!-- MMS user agent string --> |
| <string name="config_mms_user_agent" translatable="false">Android-Mms/2.0</string> |
| |
| <!-- MMS user agent prolfile url --> |
| <string name="config_mms_user_agent_profile_url" translatable="false" |
| >http://www.google.com/oha/rdf/ua-profile-kila.xml</string> |
| |
| <!-- Defines the default set of global actions. Actions may still be disabled or hidden based |
| on the current state of the device. |
| Each item must be one of the following strings: |
| "power" = Power off |
| "settings" = An action to launch settings |
| "airplane" = Airplane mode toggle |
| "bugreport" = Take bug report, if available |
| "silent" = silent mode |
| "users" = list of users |
| "restart" = restart device |
| --> |
| <string-array translatable="false" name="config_globalActionsList"> |
| <item>power</item> |
| <item>restart</item> |
| </string-array> |
| </resources> |