| <?xml version="1.0" encoding="utf-8"?> |
| <!-- |
| Copyright (c) 2014, The Linux Foundation. All rights reserved. |
| |
| Redistribution and use in source and binary forms, with or without |
| modification, are permitted provided that the following conditions are |
| met: |
| * Redistributions of source code must retain the above copyright |
| notice, this list of conditions and the following disclaimer. |
| * Redistributions in binary form must reproduce the above |
| copyright notice, this list of conditions and the following |
| disclaimer in the documentation and/or other materials provided |
| with the distribution. |
| * Neither the name of The Linux Foundation nor the names of its |
| contributors may be used to endorse or promote products derived |
| from this software without specific prior written permission. |
| |
| THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED |
| WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF |
| MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT |
| ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS |
| BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR |
| BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, |
| WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE |
| OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN |
| IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE |
| --> |
| |
| <resources> |
| |
| <!-- Audio --> |
| <!-- Whether the Unprocessed audio source supports the required frequency range and level --> |
| <bool name="config_supportAudioSourceUnprocessed">true</bool> |
| |
| |
| <!-- Bluetooth --> |
| <!-- Boolean indicating if current platform supports HFP inband ringing --> |
| <bool name="config_bluetooth_hfp_inband_ringing_support">true</bool> |
| |
| <!-- Boolean indicating if current platform supports BLE peripheral mode --> |
| <bool name="config_bluetooth_le_peripheral_mode_supported">true</bool> |
| |
| |
| <!-- Camera Shutter --> |
| <!-- Whether camera shutter sound is forced or not (country specific). --> |
| <bool name="config_camera_sound_forced">false</bool> |
| |
| |
| <!-- Dialer --> |
| <!-- The name of the package that will hold the dialer role by default. --> |
| <string name="config_defaultDialer" translatable="false">com.android.dialer</string> |
| |
| |
| <!-- Doze --> |
| <!-- Enable doze mode --> |
| <string name="config_dozeComponent">com.android.systemui/com.android.systemui.doze.DozeService</string> |
| <bool name="config_dozeAfterScreenOff">true</bool> |
| <!-- Screen brightness when dozing. --> |
| <integer name="config_screenBrightnessDoze">17</integer> |
| <bool name="config_powerDecoupleInteractiveModeFromDisplay">false</bool> |
| <bool name="config_setColorTransformAccelerated">true</bool> |
| |
| |
| <!-- Multi User --> |
| <!-- Maximum number of supported users --> |
| <integer name="config_multiuserMaximumUsers">4</integer> |
| <!-- Whether Multiuser UI should be shown --> |
| <bool name="config_enableMultiUserUI">true</bool> |
| |
| |
| <!-- NTP Server --> |
| |
| <!-- Remote server that can provide NTP responses. --> |
| <string translatable="false" name="config_ntpServer">europe.pool.ntp.org</string> |
| |
| |
| <!-- Screen and Display --> |
| |
| <!-- Is the notification LED intrusive? Used to decide if there should be a disable option --> |
| <bool name="config_intrusiveNotificationLed">true</bool> |
| |
| <!-- Flag indicating whether the we should enable the automatic brightness in Settings. |
| Software implementation will be used if config_hardware_auto_brightness_available is not set --> |
| <bool name="config_automatic_brightness_available">true</bool> |
| |
| <!-- The maximum range of gamma adjustment possible using the screen |
| auto-brightness adjustment setting. --> |
| <fraction name="config_autoBrightnessAdjustmentMaxGamma">300%</fraction> |
| |
| <!-- Stability requirements in milliseconds for accepting a new brightness level. This is used |
| for debouncing the light sensor. Different constants are used to debounce the light sensor |
| when adapting to brighter or darker environments. This parameter controls how quickly |
| brightness changes occur in response to an observed change in light level that exceeds the |
| hysteresis threshold. --> |
| <integer name="config_autoBrightnessBrighteningLightDebounce">2000</integer> |
| <integer name="config_autoBrightnessDarkeningLightDebounce">8000</integer> |
| |
| <!-- Array of light sensor LUX values to define our levels for auto backlight brightness support. |
| The N entries of this array define N + 1 control points as follows: |
| (1-based arrays) |
| |
| Point 1: (0, value[1]): lux <= 0 |
| Point 2: (level[1], value[2]): 0 < lux <= level[1] |
| Point 3: (level[2], value[3]): level[2] < lux <= level[3] |
| ... |
| Point N+1: (level[N], value[N+1]): level[N] < lux |
| |
| The control points must be strictly increasing. Each control point |
| corresponds to an entry in the brightness backlight values arrays. |
| For example, if LUX == level[1] (first element of the levels array) |
| then the brightness will be determined by value[2] (second element |
| of the brightness values array). |
| |
| Spline interpolation is used to determine the auto-brightness |
| backlight values for LUX levels between these control points. |
| |
| Must be overridden in platform specific overlays --> |
| <integer-array name="config_autoBrightnessLevels"> |
| <item>10</item> |
| <item>30</item> |
| <item>60</item> |
| <item>100</item> |
| <item>150</item> |
| <item>210</item> |
| <item>255</item> |
| </integer-array> |
| |
| <!-- Array of output values for LCD backlight corresponding to the LUX values |
| in the config_autoBrightnessLevels array. This array should have size one greater |
| than the size of the config_autoBrightnessLevels array. |
| The brightness values must be between 0 and 255 and be non-decreasing. |
| This must be overridden in platform specific overlays --> |
| <integer-array name="config_autoBrightnessLcdBacklightValues"> |
| <item>10</item> |
| <item>20</item> |
| <item>40</item> |
| <item>70</item> |
| <item>110</item> |
| <item>160</item> |
| <item>200</item> |
| <item>255</item> |
| </integer-array> |
| |
| <!-- Screen brightness used to dim the screen when the user activity |
| timeout expires. May be less than the minimum allowed brightness setting |
| that can be set by the user. --> |
| <integer name="config_screenBrightnessDim">1</integer> |
| |
| <!-- Default screen brightness setting. |
| Must be in the range specified by minimum and maximum. --> |
| <integer name="config_screenBrightnessSettingDefault">71</integer> |
| |
| <!-- Indicate whether to allow the device to suspend when the screen is off |
| due to the proximity sensor. This resource should only be set to true |
| if the sensor HAL correctly handles the proximity sensor as a wake-up source. |
| Otherwise, the device may fail to wake out of suspend reliably. |
| The default is false. --> |
| <bool name="config_suspendWhenScreenOffDueToProximity">true</bool> |
| |
| <!-- If this is true, the screen will come on when you plug/unplug usb/power/whatever. --> |
| <bool name="config_unplugTurnsOnScreen">true</bool> |
| |
| |
| <!-- Navigation bar --> |
| |
| <!-- Enable system navigation keys. --> |
| <bool name="config_supportSystemNavigationKeys">true</bool> |
| |
| <!-- Whether a software navigation bar should be shown. NOTE: in the future this may be |
| autodetected from the Configuration. --> |
| <bool name="config_showNavigationBar">true</bool> |
| |
| |
| <!-- Round Icons --> |
| |
| <!-- Set icon mask to circle --> |
| <string name="config_icon_mask" translatable="false">"M50 0A50 50,0,1,1,50 100A50 50,0,1,1,50 0"</string> |
| |
| <!-- Flag indicating whether round icons should be parsed from the application manifest. --> |
| <bool name="config_useRoundIcon">true</bool> |
| |
| |
| <!-- Biometics --> |
| |
| <!-- List of biometric sensors on the device, in decreasing strength. Consumed by AuthService |
| when registering authenticators with BiometricService. Format must be ID:Modality:Strength, |
| where: IDs are unique per device, Modality as defined in BiometricAuthenticator.java, |
| and Strength as defined in Authenticators.java --> |
| <string-array name="config_biometric_sensors" translatable="false" > |
| <item>0:2:15</item> <!-- ID0:Fingerprint:Strong --> |
| </string-array> |
| |
| |
| <!-- Vibrator pattern for feedback about touching a virtual key --> |
| <integer-array name="config_virtualKeyVibePattern"> |
| <item>20</item> |
| </integer-array> |
| |
| <!-- Vibrator pattern for feedback about a long screen/key press --> |
| <integer-array name="config_longPressVibePattern"> |
| <item>0</item> |
| <item>1</item> |
| <item>20</item> |
| <item>30</item> |
| </integer-array> |
| |
| |
| <!-- NOTE: All Telephony/IMS/Operator Requirement configs to be added below this line. --> |
| |
| |
| <!-- Set to true to add links to Cell Broadcast app from Settings and MMS app. --> |
| <bool name="config_cellBroadcastAppLinks">true</bool> |
| |
| <!-- This string array should be overridden by the device to present a list of network |
| attributes. This is used by the connectivity manager to decide which networks can coexist |
| based on the hardware --> |
| <!-- An Array of "[Connection name],[ConnectivityManager.TYPE_xxxx], |
| [associated radio-type],[priority],[restoral-timer(ms)],[dependencyMet] --> |
| <!-- the 5th element "resore-time" indicates the number of milliseconds to delay |
| before automatically restore the default connection. Set -1 if the connection |
| does not require auto-restore. --> |
| <!-- the 6th element indicates boot-time dependency-met value. --> |
| <string-array translatable="false" name="networkAttributes"> |
| <item>"wifi,1,1,1,-1,true"</item> |
| <item>"mobile,0,0,0,-1,true"</item> |
| <item>"mobile_mms,2,0,4,60000,true"</item> |
| <item>"mobile_supl,3,0,2,60000,true"</item> |
| <item>"mobile_dun,4,0,2,60000,true"</item> |
| <item>"mobile_hipri,5,0,3,60000,true"</item> |
| <item>"mobile_fota,10,0,2,60000,true"</item> |
| <item>"mobile_ims,11,0,2,60000,true"</item> |
| <item>"mobile_cbs,12,0,2,60000,true"</item> |
| <item>"bluetooth,7,7,2,-1,true"</item> |
| <item>"mobile_emergency,15,0,5,-1,true"</item> |
| </string-array> |
| |
| <!-- This string array should be overridden by the device to present a list of radio |
| attributes. This is used by the connectivity manager to decide which networks can coexist |
| based on the hardware --> |
| <!-- An Array of "[ConnectivityManager connectionType], |
| [# simultaneous connection types]" --> |
| <string-array translatable="false" name="radioAttributes"> |
| <item>"1,1"</item> |
| <item>"0,1"</item> |
| <item>"7,1"</item> |
| </string-array> |
| |
| <!-- Boolean indicating if restoring network selection should be skipped --> |
| <!-- The restoring is handled by modem if it is true--> |
| <bool translatable="false" name="skip_restoring_network_selection">true</bool> |
| |
| <!-- Is the device capable of hot swapping an ICC Card --> |
| <bool name="config_hotswapCapable">true</bool> |
| |
| <!-- MMS user agent string --> |
| <string name="config_mms_user_agent" translatable="false">Android-Mms/2.0</string> |
| |
| <!-- MMS user agent prolfile url --> |
| <string name="config_mms_user_agent_profile_url" translatable="false" |
| >https://techsupport.fairphone.com/uap/FP3EEA_UAP.xml</string> |
| |
| <!-- Configuration to restart radio upon PDP_DEACTIVATE with |
| error cause as Regular deactivation(36). --> |
| <!-- |
| <bool name="config_radio_reset_on_regular_deactivation">false</bool> |
| --> |
| <!-- Flag indicating if the speed up audio on mt call code should be executed --> |
| <bool name="config_speed_up_audio_on_mt_calls">true</bool> |
| |
| <!-- Flag specifying whether VoLTE, VT and WFC is available on device --> |
| <bool name="config_device_volte_available">true</bool> |
| <bool name="config_device_vt_available">true</bool> |
| <bool name="config_device_wfc_ims_available">true</bool> |
| |
| <!-- Flag specifying whether VoLTE & VT should be available for carrier: independent of |
| carrier provisioning. If false: hard disabled. If true: then depends on carrier |
| provisioning, availability etc --> |
| <bool name="config_carrier_volte_available">true</bool> |
| |
| <!-- Configure mobile tcp buffer sizes in the form: |
| rat-name:rmem_min,rmem_def,rmem_max,wmem_min,wmem_def,wmem_max |
| If no value is found for the rat-name in use, the system default will be applied. |
| --> |
| <string-array name="config_mobile_tcp_buffers"> |
| <item>"5gnr:2097152,6291456,16777216,512000,2097152,8388608"</item> |
| <item>"lte:2097152,4194304,8388608,262144,524288,1048576"</item> |
| <item>"lte_ca:4096,6291456,12582912,4096,1048576,2097152"</item> |
| <item>"umts:4094,87380,1220608,4096,16384,1220608"</item> |
| <item>"hspa:4094,87380,1220608,4096,16384,1220608"</item> |
| <item>"hsupa:4094,87380,1220608,4096,16384,1220608"</item> |
| <item>"hsdpa:4094,87380,1220608,4096,16384,1220608"</item> |
| <item>"hspap:4094,87380,1220608,4096,16384,1220608"</item> |
| <item>"edge:4093,26280,35040,4096,16384,35040"</item> |
| <item>"gprs:4092,8760,11680,4096,8760,11680"</item> |
| <item>"evdo:4094,87380,524288,4096,16384,262144"</item> |
| </string-array> |
| |
| </resources> |