BoardConfig.mk - device/fairphone/fp3 - Gitiles

 # config.mk
 #
 # Product-specific compile-time definitions.
 #

 FP_PATH := device/fairphone/FP3

 # Architecture
 TARGET_ARCH := arm64
 TARGET_ARCH_VARIANT := armv8-a
 TARGET_CPU_ABI := arm64-v8a
 TARGET_CPU_ABI2 :=
 TARGET_CPU_VARIANT := generic
 TARGET_CPU_VARIANT_RUNTIME := kryo

 TARGET_2ND_ARCH := arm
 TARGET_2ND_ARCH_VARIANT := armv8-a
 TARGET_2ND_CPU_ABI := armeabi-v7a
 TARGET_2ND_CPU_ABI2 := armeabi
 TARGET_2ND_CPU_VARIANT := generic
 TARGET_2ND_CPU_VARIANT_RUNTIME := cortex-a53
 TARGET_CPU_CORTEX_A53 := true


 # Adreno
 BOARD_USES_ADRENO := true


 # Audio
 # QC Audio
 #AUDIO_FEATURE_ENABLED_MULTIPLE_TUNNEL := true
 #AUDIO_FEATURE_ENABLED_VOICE_CONCURRENCY := true
 AUDIO_FEATURE_ENABLED_AAC_ADTS_OFFLOAD := true
 AUDIO_FEATURE_ENABLED_ALAC_OFFLOAD := true
 AUDIO_FEATURE_ENABLED_APE_OFFLOAD := true
 AUDIO_FEATURE_ENABLED_AUDIOSPHERE := true
 AUDIO_FEATURE_ENABLED_COMPRESS_CAPTURE := false
 AUDIO_FEATURE_ENABLED_COMPRESS_VOIP := false
 AUDIO_FEATURE_ENABLED_DS2_DOLBY_DAP := false
 AUDIO_FEATURE_ENABLED_DTS_EAGLE := false
 AUDIO_FEATURE_ENABLED_EXTN_FLAC_DECODER := true
 AUDIO_FEATURE_ENABLED_EXTN_FORMATS := true
 AUDIO_FEATURE_ENABLED_EXTN_RESAMPLER := true
 AUDIO_FEATURE_ENABLED_FLAC_OFFLOAD := true
 AUDIO_FEATURE_ENABLED_FM_POWER_OPT := true
 AUDIO_FEATURE_ENABLED_HW_ACCELERATED_EFFECTS := false
 AUDIO_FEATURE_ENABLED_PCM_OFFLOAD := true
 AUDIO_FEATURE_ENABLED_PCM_OFFLOAD_24 := true
 AUDIO_FEATURE_ENABLED_PROXY_DEVICE := true
 AUDIO_FEATURE_ENABLED_SSR := true
 AUDIO_FEATURE_ENABLED_VORBIS_OFFLOAD := true
 AUDIO_FEATURE_ENABLED_WMA_OFFLOAD := true
 AUDIO_FEATURE_QSSI_COMPLIANCE := true
 BOARD_USES_ALSA_AUDIO := true
 BOARD_USES_SRS_TRUEMEDIA := false
 DOLBY_ENABLE := false
 DTS_CODEC_M_ := true
 MM_AUDIO_ENABLED_SAFX := true
 USE_CUSTOM_AUDIO_POLICY := 1

 AUDIO_FEATURE_ENABLED_ACDB_LICENSE := true
 AUDIO_FEATURE_ENABLED_ANC_HEADSET := true
 AUDIO_FEATURE_ENABLED_CUSTOMSTEREO := true
 AUDIO_FEATURE_ENABLED_DEV_ARBI := false
 AUDIO_FEATURE_ENABLED_DLKM := true
 AUDIO_FEATURE_ENABLED_DYNAMIC_LOG := false # TODO: Check if this is required, has proprietary depepndency
 AUDIO_FEATURE_ENABLED_EXT_HDMI := false # TODO: Check if this is required, has proprietary depepndency
 AUDIO_FEATURE_ENABLED_FLUENCE := true
 AUDIO_FEATURE_ENABLED_HDMI_EDID := true
 AUDIO_FEATURE_ENABLED_HDMI_PASSTHROUGH := true
 AUDIO_FEATURE_ENABLED_HDMI_SPK := true
 AUDIO_FEATURE_ENABLED_HFP := true
 AUDIO_FEATURE_ENABLED_HIFI_AUDIO := true
 AUDIO_FEATURE_ENABLED_INCALL_MUSIC := true
 AUDIO_FEATURE_ENABLED_KPI_OPTIMIZE := true
 AUDIO_FEATURE_ENABLED_MULTI_VOICE_SESSIONS := true
 AUDIO_FEATURE_ENABLED_NT_PAUSE_TIMEOUT := true
 AUDIO_FEATURE_ENABLED_SND_MONITOR := true
 AUDIO_FEATURE_ENABLED_SOURCE_TRACKING := true
 AUDIO_FEATURE_ENABLED_SPKR_PROTECTION := true
 AUDIO_FEATURE_ENABLED_SVA_MULTI_STAGE := true
 AUDIO_FEATURE_ENABLED_VBAT_MONITOR := true
 AUDIO_USE_LL_AS_PRIMARY_OUTPUT := true
 BOARD_SUPPORTS_QAHW := false
 BOARD_SUPPORTS_SOUND_TRIGGER := true
 MM_AUDIO_ENABLED_FTM := true
 TARGET_USES_QCOM_MM_AUDIO := true
 USE_XML_AUDIO_POLICY_CONF := 1


 # Bluetooth
 BLUETOOTH_HCI_USE_MCT := true
 BOARD_ANT_WIRELESS_DEVICE := "vfs-prerelease"
 BOARD_BLUETOOTH_BDROID_BUILDCFG_INCLUDE_DIR := device/qcom/common
 BOARD_HAVE_BLUETOOTH := true


 #Board
 BOOTLOADER_PLATFORM := msm8953 # use msm8953 LK configuration
 TARGET_BOARD_PLATFORM := msm8953
 TARGET_BOOTLOADER_BOARD_NAME := FP3
 TARGET_BOOTLOADER_PLATFORM_OVERRIDE := $(TARGET_DEVICE)
 TARGET_NO_BOOTLOADER := false


 # Broken flags
 BUILD_BROKEN_NINJA_USES_ENV_VARS := SDCLANG_AE_CONFIG SDCLANG_CONFIG SDCLANG_SA_ENABLED SDCLANG_CONFIG_AOSP
 BUILD_BROKEN_NINJA_USES_ENV_VARS += TEMPORARY_DISABLE_PATH_RESTRICTIONS
 BUILD_BROKEN_NINJA_USES_ENV_VARS += RTIC_MPGEN


 # Camera
 BOARD_QTI_CAMERA_32BIT_ONLY := true


 # Data


 # Dexpreopt
 # Enable dex pre-opt to speed up initial boot
 ifeq ($(HOST_OS),linux)
   ifeq ($(WITH_DEXPREOPT),)
     WITH_DEXPREOPT := true
     WITH_DEXPREOPT_PIC := true
     ifneq ($(TARGET_BUILD_VARIANT),user)
       # Retain classes.dex in APK's for non-user builds
       DEX_PREOPT_DEFAULT := nostripping
     endif
   endif
 endif


 # File systems and Partitions
 BOARD_BUILD_SYSTEM_ROOT_IMAGE := true
 BOARD_PERSISTIMAGE_FILE_SYSTEM_TYPE := ext4
 BOARD_USES_METADATA_PARTITION := true
 BOARD_USES_RECOVERY_AS_BOOT := true
 BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE := ext4
 TARGET_COPY_OUT_VENDOR := vendor
 TARGET_NO_RECOVERY := true
 TARGET_USERIMAGES_USE_EXT4 := true

 # Note: Support for Product partition is intentionally removed
 # because of the limited size of the partition(125MB).
 # It will be system/product/ instead.

 BOARD_BOOTIMAGE_PARTITION_SIZE := 0x04000000
 BOARD_DTBOIMG_PARTITION_SIZE := 8388608
 BOARD_FLASH_BLOCK_SIZE := 131072
 BOARD_METADATAIMAGE_PARTITION_SIZE := 16777216
 BOARD_OEMIMAGE_PARTITION_SIZE := 268435456
 BOARD_PERSISTIMAGE_PARTITION_SIZE := 33554432
 BOARD_SYSTEMIMAGE_PARTITION_SIZE := 3221225472
 BOARD_USERDATAIMAGE_PARTITION_SIZE := 51808043008
 BOARD_VENDORIMAGE_PARTITION_SIZE := 1073741824


 # Filesystem
 TARGET_FS_CONFIG_GEN := $(FP_PATH)/configs/config.fs


 # GPS


 # Graphics
 # MAX_VIRTUAL_DISPLAY_DIMENSION := 4096
 MAX_EGL_CACHE_KEY_SIZE := 12*1024
 MAX_EGL_CACHE_SIZE := 2048*1024
 NUM_FRAMEBUFFER_SURFACE_BUFFERS := 3
 OVERRIDE_RS_DRIVER := libRSDriver_adreno.so
 TARGET_FORCE_HWC_FOR_VIRTUAL_DISPLAYS := true
 TARGET_USES_C2D_COMPOSITION := true
 TARGET_USES_COLOR_METADATA := true
 TARGET_USES_GRALLOC1 := true
 TARGET_USES_HWC2 := true
 TARGET_USES_ION := true


 # HIDL
 DEVICE_FRAMEWORK_MANIFEST_FILE := $(FP_PATH)/framework_manifest.xml
 DEVICE_MANIFEST_FILE := $(FP_PATH)/manifest.xml
 DEVICE_MATRIX_FILE := $(FP_PATH)/compatibility_matrix.xml
 DEVICE_FRAMEWORK_COMPATIBILITY_MATRIX_FILE := \
     vendor/qcom/opensource/core-utils/vendor_framework_compatibility_matrix.xml


 # Kernel
 BOARD_KERNEL_BASE        := 0x80000000
 BOARD_KERNEL_PAGESIZE    := 2048
 BOARD_KERNEL_OFFSET      := 0x00008000
 BOARD_KERNEL_TAGS_OFFSET := 0x00000100
 BOARD_RAMDISK_OFFSET     := 0x01000000
 TARGET_COMPILE_WITH_MSM_KERNEL := true
 TARGET_KERNEL_VERSION ?= 4.9
 TARGET_KERNEL_SOURCE ?= kernel/msm-$(TARGET_KERNEL_VERSION)
 TARGET_KERNEL_ARCH := arm64
 TARGET_KERNEL_HEADER_ARCH := arm64
 TARGET_KERNEL_APPEND_DTB := true
 TARGET_USES_UNCOMPRESSED_KERNEL := false
 BOARD_KERNEL_IMAGE_NAME := Image.gz-dtb
 BOARD_KERNEL_SEPARATED_DTBO := true

 BOARD_KERNEL_CMDLINE := androidboot.console=ttyMSM0
 BOARD_KERNEL_CMDLINE += androidboot.hardware=qcom
 BOARD_KERNEL_CMDLINE += msm_rtb.filter=0x237
 BOARD_KERNEL_CMDLINE += ehci-hcd.park=3
 BOARD_KERNEL_CMDLINE += lpm_levels.sleep_disabled=1
 BOARD_KERNEL_CMDLINE += androidboot.bootdevice=7824900.sdhci
 BOARD_KERNEL_CMDLINE += earlycon=msm_serial_dm,0x78af000
 BOARD_KERNEL_CMDLINE += androidboot.usbconfigfs=true
 BOARD_KERNEL_CMDLINE += loop.max_part=7
 ifneq (,$(filter userdebug eng,$(TARGET_BUILD_VARIANT)))
 BOARD_KERNEL_CMDLINE += console=ttyMSM0,115200,n8
 BOARD_KERNEL_CMDLINE += androidboot.selinux=permissive
 endif

 # Declare boot header
 BOARD_BOOT_HEADER_VERSION := 1
 BOARD_MKBOOTIMG_ARGS += --header_version $(BOARD_BOOT_HEADER_VERSION)


 # Kernel modules
 BOARD_VENDOR_KERNEL_MODULES := \
 	$(KERNEL_MODULES_OUT)/audio_apr.ko \
 	$(KERNEL_MODULES_OUT)/audio_q6_notifier.ko \
 	$(KERNEL_MODULES_OUT)/audio_adsp_loader.ko \
 	$(KERNEL_MODULES_OUT)/audio_q6.ko \
 	$(KERNEL_MODULES_OUT)/audio_usf.ko \
 	$(KERNEL_MODULES_OUT)/audio_pinctrl_wcd.ko \
 	$(KERNEL_MODULES_OUT)/audio_swr.ko \
 	$(KERNEL_MODULES_OUT)/audio_wcd_core.ko \
 	$(KERNEL_MODULES_OUT)/audio_swr_ctrl.ko \
 	$(KERNEL_MODULES_OUT)/audio_wsa881x.ko \
 	$(KERNEL_MODULES_OUT)/audio_wsa881x_analog.ko \
 	$(KERNEL_MODULES_OUT)/audio_platform.ko \
 	$(KERNEL_MODULES_OUT)/audio_cpe_lsm.ko \
 	$(KERNEL_MODULES_OUT)/audio_hdmi.ko \
 	$(KERNEL_MODULES_OUT)/audio_stub.ko \
 	$(KERNEL_MODULES_OUT)/audio_wcd9xxx.ko \
 	$(KERNEL_MODULES_OUT)/audio_mbhc.ko \
 	$(KERNEL_MODULES_OUT)/audio_wcd9335.ko \
 	$(KERNEL_MODULES_OUT)/audio_wcd_cpe.ko \
 	$(KERNEL_MODULES_OUT)/audio_digital_cdc.ko \
 	$(KERNEL_MODULES_OUT)/audio_analog_cdc.ko \
 	$(KERNEL_MODULES_OUT)/audio_native.ko \
 	$(KERNEL_MODULES_OUT)/audio_machine_sdm450.ko \
 	$(KERNEL_MODULES_OUT)/audio_machine_ext_sdm450.ko

 BOARD_VENDOR_KERNEL_MODULES += $(KERNEL_MODULES_OUT)/pronto_wlan.ko


 # Lights
 TARGET_PROVIDES_LIBLIGHT := true


 # NFC


 # Others
 BOARD_CHARGER_DISABLE_INIT_BLANK := true # Disable the init blank to avoid flicker
 BOARD_CHARGER_ENABLE_SUSPEND := true # Enable suspend during charger mode
 BOARD_DO_NOT_STRIP_VENDOR_MODULES := true
 BOARD_USES_GENERIC_AUDIO := true
 KASLRSEED_SUPPORT := true # Enable kaslr seed support
 TARGET_USES_AOSP := false
 TARGET_USES_AOSP_FOR_AUDIO := false
 TARGET_USE_MDTP := true # Enable MDTP during recovery
 TARGET_USES_QCOM_BSP := false
 TARGET_USES_MEDIA_EXTENSIONS := true


 # QCOM hardware
 BOARD_USES_QCOM_HARDWARE := true


 # Recovery
 TARGET_RECOVERY_FSTAB := $(FP_PATH)/fstabs-4.9/recovery_AB_split_variant.fstab


 # SELinux
 include device/qcom/sepolicy/SEPolicy.mk
 BOARD_VENDOR_SEPOLICY_DIRS += $(FP_PATH)/sepolicy/vendor
 #TODO: clean up elan policies
 BOARD_VENDOR_SEPOLICY_DIRS += $(FP_PATH)/elan_lib/fingerprint/sepolicy


 # Seccomp
 BOARD_SECCOMP_POLICY := $(FP_PATH)/seccomp


 # Sensors
 USE_SENSOR_MULTI_HAL := true


 # Treble
 BOARD_SYSTEMSDK_VERSIONS := 28
 BOARD_VNDK_VERSION := current


 # WiFi
 BOARD_HAS_QCOM_WLAN := true
 BOARD_HOSTAPD_DRIVER := NL80211
 BOARD_WLAN_DEVICE := qcwcn
 BOARD_HOSTAPD_PRIVATE_LIB := lib_driver_cmd_$(BOARD_WLAN_DEVICE)
 BOARD_WPA_SUPPLICANT_DRIVER := NL80211
 BOARD_WPA_SUPPLICANT_PRIVATE_LIB := lib_driver_cmd_$(BOARD_WLAN_DEVICE)
 WIFI_DRIVER_MODULE_NAME := "wlan"
 WIFI_DRIVER_MODULE_PATH := "vendor/lib/modules/pronto_wlan.ko"
 WIFI_DRIVER_FW_PATH_AP  := "ap"
 WIFI_DRIVER_FW_PATH_P2P := "p2p"
 WIFI_DRIVER_FW_PATH_STA := "sta"
 WIFI_DRIVER_INSTALL_TO_KERNEL_OUT := true# Part of proprietary code
 WIFI_HIDL_UNIFIED_SUPPLICANT_SERVICE_RC_ENTRY := true
 WPA_SUPPLICANT_VERSION := VER_0_8_X

 # Vendor-specific definitions
 -include vendor/fairphone/fp3/BoardConfigVendor.mk
	# config.mk
	#
	# Product-specific compile-time definitions.
	#

	FP_PATH := device/fairphone/FP3

	# Architecture
	TARGET_ARCH := arm64
	TARGET_ARCH_VARIANT := armv8-a
	TARGET_CPU_ABI := arm64-v8a
	TARGET_CPU_ABI2 :=
	TARGET_CPU_VARIANT := generic
	TARGET_CPU_VARIANT_RUNTIME := kryo

	TARGET_2ND_ARCH := arm
	TARGET_2ND_ARCH_VARIANT := armv8-a
	TARGET_2ND_CPU_ABI := armeabi-v7a
	TARGET_2ND_CPU_ABI2 := armeabi
	TARGET_2ND_CPU_VARIANT := generic
	TARGET_2ND_CPU_VARIANT_RUNTIME := cortex-a53
	TARGET_CPU_CORTEX_A53 := true


	# Adreno
	BOARD_USES_ADRENO := true


	# Audio
	# QC Audio
	#AUDIO_FEATURE_ENABLED_MULTIPLE_TUNNEL := true
	#AUDIO_FEATURE_ENABLED_VOICE_CONCURRENCY := true
	AUDIO_FEATURE_ENABLED_AAC_ADTS_OFFLOAD := true
	AUDIO_FEATURE_ENABLED_ALAC_OFFLOAD := true
	AUDIO_FEATURE_ENABLED_APE_OFFLOAD := true
	AUDIO_FEATURE_ENABLED_AUDIOSPHERE := true
	AUDIO_FEATURE_ENABLED_COMPRESS_CAPTURE := false
	AUDIO_FEATURE_ENABLED_COMPRESS_VOIP := false
	AUDIO_FEATURE_ENABLED_DS2_DOLBY_DAP := false
	AUDIO_FEATURE_ENABLED_DTS_EAGLE := false
	AUDIO_FEATURE_ENABLED_EXTN_FLAC_DECODER := true
	AUDIO_FEATURE_ENABLED_EXTN_FORMATS := true
	AUDIO_FEATURE_ENABLED_EXTN_RESAMPLER := true
	AUDIO_FEATURE_ENABLED_FLAC_OFFLOAD := true
	AUDIO_FEATURE_ENABLED_FM_POWER_OPT := true
	AUDIO_FEATURE_ENABLED_HW_ACCELERATED_EFFECTS := false
	AUDIO_FEATURE_ENABLED_PCM_OFFLOAD := true
	AUDIO_FEATURE_ENABLED_PCM_OFFLOAD_24 := true
	AUDIO_FEATURE_ENABLED_PROXY_DEVICE := true
	AUDIO_FEATURE_ENABLED_SSR := true
	AUDIO_FEATURE_ENABLED_VORBIS_OFFLOAD := true
	AUDIO_FEATURE_ENABLED_WMA_OFFLOAD := true
	AUDIO_FEATURE_QSSI_COMPLIANCE := true
	BOARD_USES_ALSA_AUDIO := true
	BOARD_USES_SRS_TRUEMEDIA := false
	DOLBY_ENABLE := false
	DTS_CODEC_M_ := true
	MM_AUDIO_ENABLED_SAFX := true
	USE_CUSTOM_AUDIO_POLICY := 1

	AUDIO_FEATURE_ENABLED_ACDB_LICENSE := true
	AUDIO_FEATURE_ENABLED_ANC_HEADSET := true
	AUDIO_FEATURE_ENABLED_CUSTOMSTEREO := true
	AUDIO_FEATURE_ENABLED_DEV_ARBI := false
	AUDIO_FEATURE_ENABLED_DLKM := true
	AUDIO_FEATURE_ENABLED_DYNAMIC_LOG := false # TODO: Check if this is required, has proprietary depepndency
	AUDIO_FEATURE_ENABLED_EXT_HDMI := false # TODO: Check if this is required, has proprietary depepndency
	AUDIO_FEATURE_ENABLED_FLUENCE := true
	AUDIO_FEATURE_ENABLED_HDMI_EDID := true
	AUDIO_FEATURE_ENABLED_HDMI_PASSTHROUGH := true
	AUDIO_FEATURE_ENABLED_HDMI_SPK := true
	AUDIO_FEATURE_ENABLED_HFP := true
	AUDIO_FEATURE_ENABLED_HIFI_AUDIO := true
	AUDIO_FEATURE_ENABLED_INCALL_MUSIC := true
	AUDIO_FEATURE_ENABLED_KPI_OPTIMIZE := true
	AUDIO_FEATURE_ENABLED_MULTI_VOICE_SESSIONS := true
	AUDIO_FEATURE_ENABLED_NT_PAUSE_TIMEOUT := true
	AUDIO_FEATURE_ENABLED_SND_MONITOR := true
	AUDIO_FEATURE_ENABLED_SOURCE_TRACKING := true
	AUDIO_FEATURE_ENABLED_SPKR_PROTECTION := true
	AUDIO_FEATURE_ENABLED_SVA_MULTI_STAGE := true
	AUDIO_FEATURE_ENABLED_VBAT_MONITOR := true
	AUDIO_USE_LL_AS_PRIMARY_OUTPUT := true
	BOARD_SUPPORTS_QAHW := false
	BOARD_SUPPORTS_SOUND_TRIGGER := true
	MM_AUDIO_ENABLED_FTM := true
	TARGET_USES_QCOM_MM_AUDIO := true
	USE_XML_AUDIO_POLICY_CONF := 1


	# Bluetooth
	BLUETOOTH_HCI_USE_MCT := true
	BOARD_ANT_WIRELESS_DEVICE := "vfs-prerelease"
	BOARD_BLUETOOTH_BDROID_BUILDCFG_INCLUDE_DIR := device/qcom/common
	BOARD_HAVE_BLUETOOTH := true


	#Board
	BOOTLOADER_PLATFORM := msm8953 # use msm8953 LK configuration
	TARGET_BOARD_PLATFORM := msm8953
	TARGET_BOOTLOADER_BOARD_NAME := FP3
	TARGET_BOOTLOADER_PLATFORM_OVERRIDE := $(TARGET_DEVICE)
	TARGET_NO_BOOTLOADER := false


	# Broken flags
	BUILD_BROKEN_NINJA_USES_ENV_VARS := SDCLANG_AE_CONFIG SDCLANG_CONFIG SDCLANG_SA_ENABLED SDCLANG_CONFIG_AOSP
	BUILD_BROKEN_NINJA_USES_ENV_VARS += TEMPORARY_DISABLE_PATH_RESTRICTIONS
	BUILD_BROKEN_NINJA_USES_ENV_VARS += RTIC_MPGEN


	# Camera
	BOARD_QTI_CAMERA_32BIT_ONLY := true


	# Data


	# Dexpreopt
	# Enable dex pre-opt to speed up initial boot
	ifeq ($(HOST_OS),linux)
	ifeq ($(WITH_DEXPREOPT),)
	WITH_DEXPREOPT := true
	WITH_DEXPREOPT_PIC := true
	ifneq ($(TARGET_BUILD_VARIANT),user)
	# Retain classes.dex in APK's for non-user builds
	DEX_PREOPT_DEFAULT := nostripping
	endif
	endif
	endif


	# File systems and Partitions
	BOARD_BUILD_SYSTEM_ROOT_IMAGE := true
	BOARD_PERSISTIMAGE_FILE_SYSTEM_TYPE := ext4
	BOARD_USES_METADATA_PARTITION := true
	BOARD_USES_RECOVERY_AS_BOOT := true
	BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE := ext4
	TARGET_COPY_OUT_VENDOR := vendor
	TARGET_NO_RECOVERY := true
	TARGET_USERIMAGES_USE_EXT4 := true

	# Note: Support for Product partition is intentionally removed
	# because of the limited size of the partition(125MB).
	# It will be system/product/ instead.

	BOARD_BOOTIMAGE_PARTITION_SIZE := 0x04000000
	BOARD_DTBOIMG_PARTITION_SIZE := 8388608
	BOARD_FLASH_BLOCK_SIZE := 131072
	BOARD_METADATAIMAGE_PARTITION_SIZE := 16777216
	BOARD_OEMIMAGE_PARTITION_SIZE := 268435456
	BOARD_PERSISTIMAGE_PARTITION_SIZE := 33554432
	BOARD_SYSTEMIMAGE_PARTITION_SIZE := 3221225472
	BOARD_USERDATAIMAGE_PARTITION_SIZE := 51808043008
	BOARD_VENDORIMAGE_PARTITION_SIZE := 1073741824


	# Filesystem
	TARGET_FS_CONFIG_GEN := $(FP_PATH)/configs/config.fs


	# GPS


	# Graphics
	# MAX_VIRTUAL_DISPLAY_DIMENSION := 4096
	MAX_EGL_CACHE_KEY_SIZE := 12*1024
	MAX_EGL_CACHE_SIZE := 2048*1024
	NUM_FRAMEBUFFER_SURFACE_BUFFERS := 3
	OVERRIDE_RS_DRIVER := libRSDriver_adreno.so
	TARGET_FORCE_HWC_FOR_VIRTUAL_DISPLAYS := true
	TARGET_USES_C2D_COMPOSITION := true
	TARGET_USES_COLOR_METADATA := true
	TARGET_USES_GRALLOC1 := true
	TARGET_USES_HWC2 := true
	TARGET_USES_ION := true


	# HIDL
	DEVICE_FRAMEWORK_MANIFEST_FILE := $(FP_PATH)/framework_manifest.xml
	DEVICE_MANIFEST_FILE := $(FP_PATH)/manifest.xml
	DEVICE_MATRIX_FILE := $(FP_PATH)/compatibility_matrix.xml
	DEVICE_FRAMEWORK_COMPATIBILITY_MATRIX_FILE := \
	vendor/qcom/opensource/core-utils/vendor_framework_compatibility_matrix.xml


	# Kernel
	BOARD_KERNEL_BASE := 0x80000000
	BOARD_KERNEL_PAGESIZE := 2048
	BOARD_KERNEL_OFFSET := 0x00008000
	BOARD_KERNEL_TAGS_OFFSET := 0x00000100
	BOARD_RAMDISK_OFFSET := 0x01000000
	TARGET_COMPILE_WITH_MSM_KERNEL := true
	TARGET_KERNEL_VERSION ?= 4.9
	TARGET_KERNEL_SOURCE ?= kernel/msm-$(TARGET_KERNEL_VERSION)
	TARGET_KERNEL_ARCH := arm64
	TARGET_KERNEL_HEADER_ARCH := arm64
	TARGET_KERNEL_APPEND_DTB := true
	TARGET_USES_UNCOMPRESSED_KERNEL := false
	BOARD_KERNEL_IMAGE_NAME := Image.gz-dtb
	BOARD_KERNEL_SEPARATED_DTBO := true

	BOARD_KERNEL_CMDLINE := androidboot.console=ttyMSM0
	BOARD_KERNEL_CMDLINE += androidboot.hardware=qcom
	BOARD_KERNEL_CMDLINE += msm_rtb.filter=0x237
	BOARD_KERNEL_CMDLINE += ehci-hcd.park=3
	BOARD_KERNEL_CMDLINE += lpm_levels.sleep_disabled=1
	BOARD_KERNEL_CMDLINE += androidboot.bootdevice=7824900.sdhci
	BOARD_KERNEL_CMDLINE += earlycon=msm_serial_dm,0x78af000
	BOARD_KERNEL_CMDLINE += androidboot.usbconfigfs=true
	BOARD_KERNEL_CMDLINE += loop.max_part=7
	ifneq (,$(filter userdebug eng,$(TARGET_BUILD_VARIANT)))
	BOARD_KERNEL_CMDLINE += console=ttyMSM0,115200,n8
	BOARD_KERNEL_CMDLINE += androidboot.selinux=permissive
	endif

	# Declare boot header
	BOARD_BOOT_HEADER_VERSION := 1
	BOARD_MKBOOTIMG_ARGS += --header_version $(BOARD_BOOT_HEADER_VERSION)


	# Kernel modules
	BOARD_VENDOR_KERNEL_MODULES := \
	$(KERNEL_MODULES_OUT)/audio_apr.ko \
	$(KERNEL_MODULES_OUT)/audio_q6_notifier.ko \
	$(KERNEL_MODULES_OUT)/audio_adsp_loader.ko \
	$(KERNEL_MODULES_OUT)/audio_q6.ko \
	$(KERNEL_MODULES_OUT)/audio_usf.ko \
	$(KERNEL_MODULES_OUT)/audio_pinctrl_wcd.ko \
	$(KERNEL_MODULES_OUT)/audio_swr.ko \
	$(KERNEL_MODULES_OUT)/audio_wcd_core.ko \
	$(KERNEL_MODULES_OUT)/audio_swr_ctrl.ko \
	$(KERNEL_MODULES_OUT)/audio_wsa881x.ko \
	$(KERNEL_MODULES_OUT)/audio_wsa881x_analog.ko \
	$(KERNEL_MODULES_OUT)/audio_platform.ko \
	$(KERNEL_MODULES_OUT)/audio_cpe_lsm.ko \
	$(KERNEL_MODULES_OUT)/audio_hdmi.ko \
	$(KERNEL_MODULES_OUT)/audio_stub.ko \
	$(KERNEL_MODULES_OUT)/audio_wcd9xxx.ko \
	$(KERNEL_MODULES_OUT)/audio_mbhc.ko \
	$(KERNEL_MODULES_OUT)/audio_wcd9335.ko \
	$(KERNEL_MODULES_OUT)/audio_wcd_cpe.ko \
	$(KERNEL_MODULES_OUT)/audio_digital_cdc.ko \
	$(KERNEL_MODULES_OUT)/audio_analog_cdc.ko \
	$(KERNEL_MODULES_OUT)/audio_native.ko \
	$(KERNEL_MODULES_OUT)/audio_machine_sdm450.ko \
	$(KERNEL_MODULES_OUT)/audio_machine_ext_sdm450.ko

	BOARD_VENDOR_KERNEL_MODULES += $(KERNEL_MODULES_OUT)/pronto_wlan.ko


	# Lights
	TARGET_PROVIDES_LIBLIGHT := true


	# NFC


	# Others
	BOARD_CHARGER_DISABLE_INIT_BLANK := true # Disable the init blank to avoid flicker
	BOARD_CHARGER_ENABLE_SUSPEND := true # Enable suspend during charger mode
	BOARD_DO_NOT_STRIP_VENDOR_MODULES := true
	BOARD_USES_GENERIC_AUDIO := true
	KASLRSEED_SUPPORT := true # Enable kaslr seed support
	TARGET_USES_AOSP := false
	TARGET_USES_AOSP_FOR_AUDIO := false
	TARGET_USE_MDTP := true # Enable MDTP during recovery
	TARGET_USES_QCOM_BSP := false
	TARGET_USES_MEDIA_EXTENSIONS := true


	# QCOM hardware
	BOARD_USES_QCOM_HARDWARE := true


	# Recovery
	TARGET_RECOVERY_FSTAB := $(FP_PATH)/fstabs-4.9/recovery_AB_split_variant.fstab


	# SELinux
	include device/qcom/sepolicy/SEPolicy.mk
	BOARD_VENDOR_SEPOLICY_DIRS += $(FP_PATH)/sepolicy/vendor
	#TODO: clean up elan policies
	BOARD_VENDOR_SEPOLICY_DIRS += $(FP_PATH)/elan_lib/fingerprint/sepolicy


	# Seccomp
	BOARD_SECCOMP_POLICY := $(FP_PATH)/seccomp


	# Sensors
	USE_SENSOR_MULTI_HAL := true


	# Treble
	BOARD_SYSTEMSDK_VERSIONS := 28
	BOARD_VNDK_VERSION := current


	# WiFi
	BOARD_HAS_QCOM_WLAN := true
	BOARD_HOSTAPD_DRIVER := NL80211
	BOARD_WLAN_DEVICE := qcwcn
	BOARD_HOSTAPD_PRIVATE_LIB := lib_driver_cmd_$(BOARD_WLAN_DEVICE)
	BOARD_WPA_SUPPLICANT_DRIVER := NL80211
	BOARD_WPA_SUPPLICANT_PRIVATE_LIB := lib_driver_cmd_$(BOARD_WLAN_DEVICE)
	WIFI_DRIVER_MODULE_NAME := "wlan"
	WIFI_DRIVER_MODULE_PATH := "vendor/lib/modules/pronto_wlan.ko"
	WIFI_DRIVER_FW_PATH_AP := "ap"
	WIFI_DRIVER_FW_PATH_P2P := "p2p"
	WIFI_DRIVER_FW_PATH_STA := "sta"
	WIFI_DRIVER_INSTALL_TO_KERNEL_OUT := true# Part of proprietary code
	WIFI_HIDL_UNIFIED_SUPPLICANT_SERVICE_RC_ENTRY := true
	WPA_SUPPLICANT_VERSION := VER_0_8_X

	# Vendor-specific definitions
	-include vendor/fairphone/fp3/BoardConfigVendor.mk