| |
| ; TAS2557 Factory Test and Calibration Configuration File |
| ; ----------------------------------------------------------------------------- |
| ; PPC3 File: OBO_06102020_038_DRC_DeltaT90.ppc3 |
| ; TAS2557_Mono version: 3.0.5 |
| ; DDC Name: AAC_BCLK_15_20200612 |
| ; Comments: [Write Comments Here] |
| |
| ; FTC Settings |
| FTC_BYPASS = 0 ; Refer to documentation |
| TEST_DELTA_T = 60 ; Delta Temperature Limit during verification phase |
| CALIBRATION_TIME = 2000 ; Duration (in ms) of calibration phase |
| VERIFICATION_TIME = 4000 ; Duration (in ms) of the verification phase |
| CONFIGURATION = 0 ; Refer to documentation |
| CONFIGURATION_CALIBRATION = 1 ; Refer to documentation |
| DEV_ADDR = 98 ; I2C slave write addr (in hex) for device A |
| |
| ; Pass/Fail Limits |
| RE_HI = 10 |
| RE_LO = 5 |
| F0_HI = 1100 |
| F0_LO = 600 |
| Q_HI = 10 |
| Q_LO = 1 |
| T_HI = 60 |
| T_LO = 0 |
| |
| ; Obtained from Speaker Manufacturer |
| SPK_T_MAX = 110 ; Speaker Maximum Temperature (C) |
| SPK_RE_TOL_PER = 20 ; Re +/- tolerance (%) |
| |
| ; Obtained from PurePath Console 3 (PPC3) |
| PPC3_RE0 = 6.95 ; Re0 (ohm) |
| PPC3_FWARP = 885 ; CMWF (Hz) |
| PPC3_BL = 0.899 ; Bl (Tm) |
| PPC3_MMS = 0.1008 ; Mms (g) |
| PPC3_RTV = 63.2 ; Rtv (K/W) |
| PPC3_RTM = 91 ; Rtm (K/W) |
| PPC3_RTVA = 1057 ; Rtva (K/W) |
| PPC3_SYSGAIN = 9.35 ; System Gain (V/FS) |
| PPC3_DEV_NONLIN_PER = 1.5 ; Device Non-linearity (%) |
| PPC3_DELTA_T_LIMIT = 60 ; Delta Thermal Limit (C) |
| PPC3_PIG = 1 ; Refer to documentation |
| PPC3_RE_ALPHA = 0.00393 ; Temperature coefficient alpha (1/K) |
| FS_RATE = 48000 ; TAS2557 Sample Rate |
| |
| ; Calibration parameters locations (Book,Page,Offset,CoeffLength) |
| umg_SsmKEGCye = 0x8c,0x2d,0x64,0x01 |
| iks_E0 = 0x8c,0x2f,0x40,0x01 |
| yep_LsqM0 = 0x8c,0x2f,0x4c,0x01 |
| mcb_ZwiNgmaj = 0x8c,0x2f,0x50,0x01 |
| oyz_U0_ujx = 0x8c,0x2f,0x54,0x01 |
| kgd_OEldlc = 0x8c,0x30,0x20,0x01 |
| |