BoardConfig.mk - device/qcom/qssi - Gitiles

 # config.mk
 #
 # Product-specific compile-time definitions.
 #

 ALLOW_MISSING_DEPENDENCIES := true

 TARGET_BOARD_PLATFORM := msmnile
 TARGET_BOOTLOADER_BOARD_NAME := msmnile

 TARGET_ARCH := arm64
 TARGET_ARCH_VARIANT := armv8-a
 TARGET_CPU_ABI := arm64-v8a
 TARGET_CPU_ABI2 :=
 TARGET_CPU_VARIANT := generic

 TARGET_2ND_ARCH := arm
 TARGET_2ND_ARCH_VARIANT := armv7-a-neon
 TARGET_2ND_CPU_ABI := armeabi-v7a
 TARGET_2ND_CPU_ABI2 := armeabi
 TARGET_2ND_CPU_VARIANT := cortex-a9

 TARGET_HW_DISK_ENCRYPTION := true
 TARGET_HW_DISK_ENCRYPTION_PERF := true

 BOARD_SECCOMP_POLICY := device/qcom/$(TARGET_BOARD_PLATFORM)/seccomp

 BOARD_SYSTEMSDK_VERSIONS:= $(SHIPPING_API_LEVEL)

 TARGET_NO_BOOTLOADER := true
 TARGET_USES_UEFI := true
 TARGET_NO_KERNEL := true

 # Disable DLKMs compilation for lunch qssi builds.
 TARGET_KERNEL_DLKM_DISABLE := true

 -include $(QCPATH)/common/msmnile/BoardConfigVendor.mk

 USE_OPENGL_RENDERER := true
 BOARD_USE_LEGACY_UI := true

 ifeq ($(ENABLE_AB), true)
 # Defines for enabling A/B builds
 AB_OTA_UPDATER := true
 # Full A/B partition update set
 # AB_OTA_PARTITIONS := xbl rpm tz hyp pmic modem abl boot keymaster cmnlib cmnlib64 system bluetooth

 # Minimum partition set for automation to test recovery generation code
 # Packages generated by using just the below flag cannot be used for updating a device. You must pass
 # in the full set mentioned above as part of your make commandline
 TARGET_NO_RECOVERY := true
 else
 TARGET_NO_RECOVERY := true
 # Enable System As Root even for non-A/B
 # Add the below cache settings for /cache mountpoint, although we don't need the resultant cache image
 # from within Qssi.
 BOARD_CACHEIMAGE_PARTITION_SIZE := 268435456
 BOARD_CACHEIMAGE_FILE_SYSTEM_TYPE := ext4
 endif

 # Define BOARD_USES_METADATA_PARTITION to create metadata mount point in system image
 BOARD_USES_METADATA_PARTITION := true

 #Enable split vendor image
 ENABLE_VENDOR_IMAGE := true
 BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE := ext4
 TARGET_COPY_OUT_VENDOR := vendor
 BOARD_PROPERTY_OVERRIDES_SPLIT_ENABLED := true

 TARGET_USERIMAGES_USE_EXT4 := true
 BOARD_BOOTIMAGE_PARTITION_SIZE := 0x06000000
 BOARD_FLASH_BLOCK_SIZE := 131072 # (BOARD_KERNEL_PAGESIZE * 64)

 MAX_EGL_CACHE_KEY_SIZE := 12*1024
 MAX_EGL_CACHE_SIZE := 2048*1024

 BOARD_USES_GENERIC_AUDIO := true
 BOARD_QTI_CAMERA_32BIT_ONLY := true
 TARGET_NO_RPC := true

 TARGET_PLATFORM_DEVICE_BASE := /devices/soc.0/
 TARGET_INIT_VENDOR_LIB := libinit_msm

 #Disable appended dtb.
 TARGET_KERNEL_APPEND_DTB := false

 #Enable dtb in boot image and boot image header version 2 support.
 BOARD_BOOTIMG_HEADER_VERSION := 2
 BOARD_MKBOOTIMG_ARGS := --header_version $(BOARD_BOOTIMG_HEADER_VERSION)

 #Enable PD locater/notifier
 TARGET_PD_SERVICE_ENABLED := true

 #Enable peripheral manager
 TARGET_PER_MGR_ENABLED := true

 # Enable dex pre-opt to speed up initial boot
 ifeq ($(HOST_OS),linux)
     ifeq ($(WITH_DEXPREOPT),)
       WITH_DEXPREOPT := true
       WITH_DEXPREOPT_PIC := true
       ifneq ($(TARGET_BUILD_VARIANT),user)
         # Retain classes.dex in APK's for non-user builds
         DEX_PREOPT_DEFAULT := nostripping
       endif
     endif
 endif

 # Enable sensor multi HAL
 USE_SENSOR_MULTI_HAL := true

 #Enable INTERACTION_BOOST
 TARGET_USES_INTERACTION_BOOST := true

 #Enable DRM plugins 64 bit compilation
 TARGET_ENABLE_MEDIADRM_64 := true

 ifeq ($(ENABLE_VENDOR_IMAGE), false)
     $(error "Vendor Image is mandatory !!")
 endif

 BUILD_BROKEN_DUP_RULES := true

 # KEYSTONE(I1056bb73cc2f8796ed941b5dd7b333ef15c60891,b/147756744)
 BUILD_BROKEN_NINJA_USES_ENV_VARS := SDCLANG_AE_CONFIG SDCLANG_CONFIG SDCLANG_CONFIG_AOSP SDCLANG_SA_ENABLED
 BUILD_BROKEN_NINJA_USES_ENV_VARS += TEMPORARY_DISABLE_PATH_RESTRICTIONS
 BUILD_BROKEN_PREBUILT_ELF_FILES := true
 BUILD_BROKEN_USES_BUILD_HOST_SHARED_LIBRARY := true
 BUILD_BROKEN_USES_BUILD_HOST_EXECUTABLE := true
 BUILD_BROKEN_USES_BUILD_COPY_HEADERS := true
 BUILD_BROKEN_USES_BUILD_HOST_STATIC_LIBRARY := true

 #Enable VNDK Compliance
 BOARD_VNDK_VERSION:=current
 RECOVERY_SNAPSHOT_VERSION := current
 RAMDISK_SNAPSHOT_VERSION := current
 Q_BU_DISABLE_MODULE := true

 ###### Dynamic Partition Handling ####
 ifneq ($(strip $(BOARD_DYNAMIC_PARTITION_ENABLE)),true)
 BOARD_BUILD_SYSTEM_ROOT_IMAGE := true
 BOARD_VENDORIMAGE_PARTITION_SIZE := 1073741824
 BOARD_SYSTEMIMAGE_PARTITION_SIZE := 3221225472
 BOARD_PRODUCTIMAGE_PARTITION_SIZE := 838860800
 ifeq ($(ENABLE_AB), true)
 AB_OTA_PARTITIONS ?= system
 endif
 else
 TARGET_COPY_OUT_PRODUCT := product
 TARGET_COPY_OUT_SYSTEM_EXT := system_ext
 BOARD_USES_PRODUCTIMAGE := true
 BOARD_PRODUCTIMAGE_FILE_SYSTEM_TYPE := ext4
 BOARD_SYSTEM_EXTIMAGE_FILE_SYSTEM_TYPE := ext4
 BOARD_BUILD_SYSTEM_ROOT_IMAGE := false
 BOARD_SUPER_PARTITION_SIZE := 12884901888
 BOARD_SUPER_PARTITION_GROUPS := qti_dynamic_partitions
 BOARD_QTI_DYNAMIC_PARTITIONS_PARTITION_LIST := system system_ext product
 BOARD_QTI_DYNAMIC_PARTITIONS_SIZE := 6438256640
 BOARD_EXT4_SHARE_DUP_BLOCKS := true
 ifeq ($(ENABLE_AB), true)
 AB_OTA_PARTITIONS ?= system system_ext product vbmeta_system
 endif
 endif
 ###### Dynamic Partition Handling ####

 #################################################################################
 # This is the End of BoardConfig.mk file.
 # Now, Pickup other split Board.mk files:
 #################################################################################
 -include vendor/qcom/defs/board-defs/system/*.mk
 #################################################################################
 include device/qcom/sepolicy/SEPolicy.mk

 DIRECTED_VENDOR_SNAPSHOT := true
 DIRECTED_RECOVERY_SNAPSHOT := true
 DIRECTED_RAMDISK_SNAPSHOT := true

 -include vendor/qcom/vsdk-configs/snapshot_modules/*/*.mk
	# config.mk
	#
	# Product-specific compile-time definitions.
	#

	ALLOW_MISSING_DEPENDENCIES := true

	TARGET_BOARD_PLATFORM := msmnile
	TARGET_BOOTLOADER_BOARD_NAME := msmnile

	TARGET_ARCH := arm64
	TARGET_ARCH_VARIANT := armv8-a
	TARGET_CPU_ABI := arm64-v8a
	TARGET_CPU_ABI2 :=
	TARGET_CPU_VARIANT := generic

	TARGET_2ND_ARCH := arm
	TARGET_2ND_ARCH_VARIANT := armv7-a-neon
	TARGET_2ND_CPU_ABI := armeabi-v7a
	TARGET_2ND_CPU_ABI2 := armeabi
	TARGET_2ND_CPU_VARIANT := cortex-a9

	TARGET_HW_DISK_ENCRYPTION := true
	TARGET_HW_DISK_ENCRYPTION_PERF := true

	BOARD_SECCOMP_POLICY := device/qcom/$(TARGET_BOARD_PLATFORM)/seccomp

	BOARD_SYSTEMSDK_VERSIONS:= $(SHIPPING_API_LEVEL)

	TARGET_NO_BOOTLOADER := true
	TARGET_USES_UEFI := true
	TARGET_NO_KERNEL := true

	# Disable DLKMs compilation for lunch qssi builds.
	TARGET_KERNEL_DLKM_DISABLE := true

	-include $(QCPATH)/common/msmnile/BoardConfigVendor.mk

	USE_OPENGL_RENDERER := true
	BOARD_USE_LEGACY_UI := true

	ifeq ($(ENABLE_AB), true)
	# Defines for enabling A/B builds
	AB_OTA_UPDATER := true
	# Full A/B partition update set
	# AB_OTA_PARTITIONS := xbl rpm tz hyp pmic modem abl boot keymaster cmnlib cmnlib64 system bluetooth

	# Minimum partition set for automation to test recovery generation code
	# Packages generated by using just the below flag cannot be used for updating a device. You must pass
	# in the full set mentioned above as part of your make commandline
	TARGET_NO_RECOVERY := true
	else
	TARGET_NO_RECOVERY := true
	# Enable System As Root even for non-A/B
	# Add the below cache settings for /cache mountpoint, although we don't need the resultant cache image
	# from within Qssi.
	BOARD_CACHEIMAGE_PARTITION_SIZE := 268435456
	BOARD_CACHEIMAGE_FILE_SYSTEM_TYPE := ext4
	endif

	# Define BOARD_USES_METADATA_PARTITION to create metadata mount point in system image
	BOARD_USES_METADATA_PARTITION := true

	#Enable split vendor image
	ENABLE_VENDOR_IMAGE := true
	BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE := ext4
	TARGET_COPY_OUT_VENDOR := vendor
	BOARD_PROPERTY_OVERRIDES_SPLIT_ENABLED := true

	TARGET_USERIMAGES_USE_EXT4 := true
	BOARD_BOOTIMAGE_PARTITION_SIZE := 0x06000000
	BOARD_FLASH_BLOCK_SIZE := 131072 # (BOARD_KERNEL_PAGESIZE * 64)

	MAX_EGL_CACHE_KEY_SIZE := 12*1024
	MAX_EGL_CACHE_SIZE := 2048*1024

	BOARD_USES_GENERIC_AUDIO := true
	BOARD_QTI_CAMERA_32BIT_ONLY := true
	TARGET_NO_RPC := true

	TARGET_PLATFORM_DEVICE_BASE := /devices/soc.0/
	TARGET_INIT_VENDOR_LIB := libinit_msm

	#Disable appended dtb.
	TARGET_KERNEL_APPEND_DTB := false

	#Enable dtb in boot image and boot image header version 2 support.
	BOARD_BOOTIMG_HEADER_VERSION := 2
	BOARD_MKBOOTIMG_ARGS := --header_version $(BOARD_BOOTIMG_HEADER_VERSION)

	#Enable PD locater/notifier
	TARGET_PD_SERVICE_ENABLED := true

	#Enable peripheral manager
	TARGET_PER_MGR_ENABLED := true

	# Enable dex pre-opt to speed up initial boot
	ifeq ($(HOST_OS),linux)
	ifeq ($(WITH_DEXPREOPT),)
	WITH_DEXPREOPT := true
	WITH_DEXPREOPT_PIC := true
	ifneq ($(TARGET_BUILD_VARIANT),user)
	# Retain classes.dex in APK's for non-user builds
	DEX_PREOPT_DEFAULT := nostripping
	endif
	endif
	endif

	# Enable sensor multi HAL
	USE_SENSOR_MULTI_HAL := true

	#Enable INTERACTION_BOOST
	TARGET_USES_INTERACTION_BOOST := true

	#Enable DRM plugins 64 bit compilation
	TARGET_ENABLE_MEDIADRM_64 := true

	ifeq ($(ENABLE_VENDOR_IMAGE), false)
	$(error "Vendor Image is mandatory !!")
	endif

	BUILD_BROKEN_DUP_RULES := true

	# KEYSTONE(I1056bb73cc2f8796ed941b5dd7b333ef15c60891,b/147756744)
	BUILD_BROKEN_NINJA_USES_ENV_VARS := SDCLANG_AE_CONFIG SDCLANG_CONFIG SDCLANG_CONFIG_AOSP SDCLANG_SA_ENABLED
	BUILD_BROKEN_NINJA_USES_ENV_VARS += TEMPORARY_DISABLE_PATH_RESTRICTIONS
	BUILD_BROKEN_PREBUILT_ELF_FILES := true
	BUILD_BROKEN_USES_BUILD_HOST_SHARED_LIBRARY := true
	BUILD_BROKEN_USES_BUILD_HOST_EXECUTABLE := true
	BUILD_BROKEN_USES_BUILD_COPY_HEADERS := true
	BUILD_BROKEN_USES_BUILD_HOST_STATIC_LIBRARY := true

	#Enable VNDK Compliance
	BOARD_VNDK_VERSION:=current
	RECOVERY_SNAPSHOT_VERSION := current
	RAMDISK_SNAPSHOT_VERSION := current
	Q_BU_DISABLE_MODULE := true

	###### Dynamic Partition Handling ####
	ifneq ($(strip $(BOARD_DYNAMIC_PARTITION_ENABLE)),true)
	BOARD_BUILD_SYSTEM_ROOT_IMAGE := true
	BOARD_VENDORIMAGE_PARTITION_SIZE := 1073741824
	BOARD_SYSTEMIMAGE_PARTITION_SIZE := 3221225472
	BOARD_PRODUCTIMAGE_PARTITION_SIZE := 838860800
	ifeq ($(ENABLE_AB), true)
	AB_OTA_PARTITIONS ?= system
	endif
	else
	TARGET_COPY_OUT_PRODUCT := product
	TARGET_COPY_OUT_SYSTEM_EXT := system_ext
	BOARD_USES_PRODUCTIMAGE := true
	BOARD_PRODUCTIMAGE_FILE_SYSTEM_TYPE := ext4
	BOARD_SYSTEM_EXTIMAGE_FILE_SYSTEM_TYPE := ext4
	BOARD_BUILD_SYSTEM_ROOT_IMAGE := false
	BOARD_SUPER_PARTITION_SIZE := 12884901888
	BOARD_SUPER_PARTITION_GROUPS := qti_dynamic_partitions
	BOARD_QTI_DYNAMIC_PARTITIONS_PARTITION_LIST := system system_ext product
	BOARD_QTI_DYNAMIC_PARTITIONS_SIZE := 6438256640
	BOARD_EXT4_SHARE_DUP_BLOCKS := true
	ifeq ($(ENABLE_AB), true)
	AB_OTA_PARTITIONS ?= system system_ext product vbmeta_system
	endif
	endif
	###### Dynamic Partition Handling ####

	#################################################################################
	# This is the End of BoardConfig.mk file.
	# Now, Pickup other split Board.mk files:
	#################################################################################
	-include vendor/qcom/defs/board-defs/system/*.mk
	#################################################################################
	include device/qcom/sepolicy/SEPolicy.mk

	DIRECTED_VENDOR_SNAPSHOT := true
	DIRECTED_RECOVERY_SNAPSHOT := true
	DIRECTED_RAMDISK_SNAPSHOT := true

	-include vendor/qcom/vsdk-configs/snapshot_modules//.mk