Sungmin Choi | 5fd819d | 2012-07-18 01:49:40 -0700 | [diff] [blame] | 1 | /* |
| 2 | * Copyright 2012 The Android Open Source Project |
| 3 | * |
| 4 | * Licensed under the Apache License, Version 2.0 (the "License"); |
| 5 | * you may not use this file except in compliance with the License. |
| 6 | * You may obtain a copy of the License at |
| 7 | * |
| 8 | * http://www.apache.org/licenses/LICENSE-2.0 |
| 9 | * |
| 10 | * Unless required by applicable law or agreed to in writing, software |
| 11 | * distributed under the License is distributed on an "AS IS" BASIS, |
| 12 | * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| 13 | * See the License for the specific language governing permissions and |
| 14 | * limitations under the License. |
| 15 | */ |
| 16 | |
| 17 | #ifdef CONFIG_LGE_WLAN_QCOM_PATCH |
| 18 | |
| 19 | #include <stdio.h> |
| 20 | #include <stdlib.h> |
| 21 | #include <string.h> |
| 22 | |
| 23 | #include "wfc_util_log.h" |
| 24 | #include "wfc_util_fctrl.h" |
| 25 | #include "wfc_util_common.h" |
| 26 | |
| 27 | #include "private/android_filesystem_config.h" |
| 28 | |
| 29 | #define WFC_UTIL_FEAUTRE_COPY_NV_BIN |
| 30 | |
| 31 | #ifdef WLAN_CHIP_VERSION_WCNSS |
| 32 | #ifndef WFC_UTIL_CFG_FILE_NAME |
| 33 | #define WFC_UTIL_CFG_FILE_NAME "/data/misc/wifi/WCNSS_qcom_cfg.ini" |
| 34 | #endif |
| 35 | #ifndef WFC_UTIL_CFG_TEMPFILE_NAME |
| 36 | #define WFC_UTIL_CFG_TEMPFILE_NAME "/system/etc/wifi/WCNSS_qcom_cfg.ini" |
| 37 | #endif |
| 38 | #else /* WLAN_CHIP_VERSION_WCN1314 */ |
| 39 | #ifndef WFC_UTIL_CFG_FILE_NAME |
| 40 | #define WFC_UTIL_CFG_FILE_NAME "/data/misc/wifi/WCN1314_qcom_cfg.ini" |
| 41 | #endif |
| 42 | #ifndef WFC_UTIL_CFG_TEMPFILE_NAME |
| 43 | #define WFC_UTIL_CFG_TEMPFILE_NAME "/system/etc/wifi/WCN1314_qcom_cfg.ini" |
| 44 | #endif |
| 45 | #endif /* WLAN_CHIP_VERSION_XXXX */ |
| 46 | |
| 47 | #ifdef WFC_UTIL_FEAUTRE_COPY_NV_BIN |
| 48 | #ifdef WLAN_CHIP_VERSION_WCNSS |
| 49 | #ifndef WFC_UTIL_NV_BIN_TEMPFILE_NAME |
| 50 | #define WFC_UTIL_NV_BIN_TEMPFILE_NAME "/system/etc/wifi/WCNSS_qcom_wlan_nv.bin" |
| 51 | #endif |
| 52 | #ifndef WFC_UTIL_NV_BIN_FILE_NAME |
| 53 | #define WFC_UTIL_NV_BIN_FILE_NAME "/data/misc/wifi/WCNSS_qcom_wlan_nv.bin" |
| 54 | #endif |
| 55 | #else /* WLAN_CHIP_VERSION_WCN1314 */ |
| 56 | #ifndef WFC_UTIL_NV_BIN_TEMPFILE_NAME |
| 57 | #define WFC_UTIL_NV_BIN_TEMPFILE_NAME "/persist/WCN1314_qcom_wlan_nv.bin" |
| 58 | #endif |
| 59 | #ifndef WFC_UTIL_NV_BIN_FILE_NAME |
| 60 | #define WFC_UTIL_NV_BIN_FILE_NAME "/data/misc/wifi/WCN1314_qcom_wlan_nv.bin" |
| 61 | #endif |
| 62 | #endif /* WLAN_CHIP_VERSION_XXXX */ |
| 63 | #else /* WFC_UTIL_FEAUTRE_COPY_NV_BIN */ |
| 64 | #ifndef WFC_UTIL_NV_BIN_FILE_NAME |
| 65 | #ifdef WLAN_CHIP_VERSION_WCNSS |
| 66 | #define WFC_UTIL_NV_BIN_FILE_NAME "/persist/WCNSS_qcom_wlan_nv.bin" |
| 67 | #else /* WLAN_CHIP_VERSION_WCN1314 */ |
| 68 | #define WFC_UTIL_NV_BIN_FILE_NAME "/persist/WCN1314_qcom_wlan_nv.bin" |
| 69 | #endif /* WLAN_CHIP_VERSION_XXXX */ |
| 70 | #endif |
| 71 | #endif /* WFC_UTIL_FEAUTRE_COPY_NV_BIN */ |
| 72 | |
| 73 | #define WFC_UTIL_CFG_TAG_END_OF_CFG "END" |
| 74 | /* |
| 75 | * Station Mode MAC Address |
| 76 | */ |
| 77 | #ifdef WLAN_CHIP_VERSION_WCNSS |
| 78 | #define WFC_UTIL_CFG_TAG_MAC_ADDRESS "Intf0MacAddress=" |
| 79 | #else /* WLAN_CHIP_VERSION_WCN1314 */ |
| 80 | #define WFC_UTIL_CFG_TAG_MAC_ADDRESS "NetworkAddress=" |
| 81 | #endif /* WLAN_CHIP_VERSION_XXXX */ |
| 82 | /* |
| 83 | * AP Mode MAC Address |
| 84 | */ |
| 85 | #define WFC_UTIL_CFG_TAG_AP_MAC_ADDRESS "gAPMacAddr=" |
| 86 | |
| 87 | /* |
| 88 | * Idle Mode Power Save enable/disable for OTA test |
| 89 | */ |
| 90 | #define WFC_UTIL_CFG_TAG_IDLE_MODE_POWER_SAVE "gEnableImps=" |
| 91 | |
| 92 | /* |
| 93 | * Beacon Mode Power Save enable/disable for OTA test |
| 94 | */ |
| 95 | #define WFC_UTIL_CFG_TAG_POWER_SAVE "gEnableBmps=" |
| 96 | |
| 97 | /* |
| 98 | * L2 roaming on/off for OTA test |
| 99 | */ |
| 100 | #define WFC_UTIL_CFG_TAG_L2Roaming "gEnableHandoff=" |
| 101 | |
| 102 | /* |
| 103 | * Heartbeat24 changing for OtA test |
| 104 | */ |
| 105 | #define WFC_UTIL_CFG_TAG_HEARTBEAT24 "gHeartbeat24=" |
| 106 | |
| 107 | /* |
| 108 | * TAG for end of line |
| 109 | */ |
| 110 | #define WFC_UTIL_CFG_TAG_END_OF_LINE "\n" |
| 111 | |
| 112 | #define WFC_UTIL_CFG_LENGHT_MAC (6) |
| 113 | #define WFC_UTIL_CFG_LENGHT_MAC_STRING (WFC_UTIL_CFG_LENGHT_MAC*2) |
| 114 | |
| 115 | /* |
| 116 | * persist/WCNSS_qcom_wlan_nv.bin |
| 117 | * |
| 118 | * NV validity bitmap (4 bytes) |
| 119 | * { |
| 120 | * Bit 0 - Regulatory domain tables |
| 121 | * Bit 1 - Fields(including product ID, product bands, number of Tx/Rx chains, MAC address, manufacturing board number) |
| 122 | * Bit 2 - Optimal power per rate table |
| 123 | * Bit 3 - Default regulatory domain and country code |
| 124 | * Bit 4:31 - Reserved; always 0 |
| 125 | * } |
| 126 | * |
| 127 | * typedef PACKED_PRE struct PACKED_POST |
| 128 | * { |
| 129 | * //always ensure fields are aligned to 32-bit boundaries |
| 130 | * tANI_U16 productId; |
| 131 | * tANI_U8 productBands; //0: 0.4 GHz, 1: 2.4+5.0 GHz, 2: 5.0 GHz |
| 132 | * tANI_U8 wlanNvRevId; //0: WCN1312, 1: WCN1314, 2: PRIMA |
| 133 | * |
| 134 | * tANI_U8 numOfTxChains; |
| 135 | * tANI_U8 numOfRxChains; |
| 136 | * tANI_U8 macAddr[NV_FIELD_MAC_ADDR_SIZE]; |
| 137 | * tANI_U8 mfgSN[NV_FIELD_MFG_SN_SIZE]; |
| 138 | * } sNvFields; |
| 139 | */ |
| 140 | #define WFC_UTIL_NV_BIN_HEADER_LENGTH (4) |
| 141 | #define WFC_UTIL_NV_BIN_POS_PRODUCT_ID (WFC_UTIL_NV_BIN_HEADER_LENGTH + 0) |
| 142 | #define WFC_UTIL_NV_BIN_POS_MAC_ADDR (WFC_UTIL_NV_BIN_HEADER_LENGTH + 6) |
| 143 | |
| 144 | #ifdef WLAN_CHIP_VERSION_WCNSS |
| 145 | /* refer to prima/CORE/WDA/src/wlan_nv.c */ |
| 146 | static unsigned char nvFilelds_default[6] = {0, 0, /* productId */ |
| 147 | 1, /* productBands */ |
| 148 | 2, /* wlanNvRevId */ |
| 149 | 1, /* numOfTxChains */ |
| 150 | 2}; /* numOfRxChains */ |
| 151 | #else /* WLAN_CHIP_VERSION_WCN1314 */ |
| 152 | static unsigned char nvFilelds_default[6] = {1, 0, /* productId */ |
| 153 | 1, /* productBands */ |
| 154 | 1, /* wlanNvRevId */ |
| 155 | 1, /* numOfTxChains */ |
| 156 | 1}; /* numOfRxChains */ |
| 157 | #endif /* WLAN_CHIP_VERSION_XXXX */ |
| 158 | |
| 159 | /* |
| 160 | * wfc_util_qcom_is_default_mac |
| 161 | * |
| 162 | * |
| 163 | * |
| 164 | * return : it will return 1 if mac_add is default mac address, |
| 165 | * 2 if mac_add is RFT mac address |
| 166 | * or 0 if not. |
| 167 | */ |
| 168 | static int wfc_util_qcom_is_default_mac(char *mac_add) |
| 169 | { |
| 170 | #define WFC_UTIL_CFG_DEFAULT_MAC_RFT "00900CBACD88" |
| 171 | #define WFC_UTIL_CFG_DEFAULT_MAC_00 "000000000000" |
| 172 | #define WFC_UTIL_CFG_DEFAULT_MAC_FF "FFFFFFFFFFFF" |
| 173 | #define WFC_UTIL_CFG_DEFAULT_MAC_QCOM_I0 "000AF58989FF" |
| 174 | #define WFC_UTIL_CFG_DEFAULT_MAC_QCOM_I1 "000AF58989FE" |
| 175 | #define WFC_UTIL_CFG_DEFAULT_MAC_QCOM_I2 "000AF58989FD" |
| 176 | #define WFC_UTIL_CFG_DEFAULT_MAC_QCOM_I3 "000AF58989FC" |
| 177 | #define WFC_UTIL_CFG_DEFAULT_MAC_QCOM_AP "000AF58989EF" |
| 178 | |
| 179 | int i, sZarray=0; |
| 180 | /* |
| 181 | * default mac address array |
| 182 | */ |
| 183 | char mac_add_buff[][WFC_UTIL_CFG_LENGHT_MAC_STRING+1] = { |
| 184 | {WFC_UTIL_CFG_DEFAULT_MAC_00}, |
| 185 | {WFC_UTIL_CFG_DEFAULT_MAC_FF}, |
| 186 | {WFC_UTIL_CFG_DEFAULT_MAC_QCOM_I0} |
| 187 | }; |
| 188 | |
| 189 | sZarray = sizeof(mac_add_buff) / sizeof(mac_add_buff[0]); |
| 190 | |
| 191 | for(i=0; i<sZarray ;i++) { |
| 192 | if(0 == strncmp(mac_add, mac_add_buff[i], WFC_UTIL_CFG_LENGHT_MAC_STRING)) { |
| 193 | wfc_util_log_error("This is default MAC address [%s]", mac_add_buff[i]); |
| 194 | return 1; |
| 195 | } |
| 196 | } |
| 197 | |
| 198 | /* |
| 199 | if(1 == wfc_util_is_random_mac(mac_add)) { |
| 200 | wfc_util_log_error("This is Random MAC address"); |
| 201 | return 1; |
| 202 | } |
| 203 | */ |
| 204 | |
| 205 | if(0 == strncmp(mac_add, WFC_UTIL_CFG_DEFAULT_MAC_RFT, WFC_UTIL_CFG_LENGHT_MAC_STRING)) { |
| 206 | wfc_util_log_error("This is RFT MAC address [%s]", WFC_UTIL_CFG_DEFAULT_MAC_RFT); |
| 207 | return 2; |
| 208 | } |
| 209 | |
| 210 | return 0; |
| 211 | } |
| 212 | |
| 213 | static void wfc_util_qcom_write_mac(char *mac_add) |
| 214 | { |
| 215 | /* |
| 216 | * Station Mode MAC Address |
| 217 | */ |
| 218 | wfc_util_fset_string(WFC_UTIL_CFG_FILE_NAME, |
| 219 | WFC_UTIL_CFG_TAG_END_OF_CFG, |
| 220 | WFC_UTIL_CFG_TAG_MAC_ADDRESS, |
| 221 | WFC_UTIL_CFG_TAG_END_OF_LINE, |
| 222 | mac_add); |
| 223 | |
| 224 | /* |
| 225 | * AP Mode MAC Address |
| 226 | */ |
| 227 | wfc_util_fset_string(WFC_UTIL_CFG_FILE_NAME, |
| 228 | WFC_UTIL_CFG_TAG_END_OF_CFG, |
| 229 | WFC_UTIL_CFG_TAG_AP_MAC_ADDRESS, |
| 230 | WFC_UTIL_CFG_TAG_END_OF_LINE, |
| 231 | mac_add); |
| 232 | |
| 233 | return; |
| 234 | } |
| 235 | |
| 236 | /* |
| 237 | * When OTA is enabled, power save mode and L2 roaming trigger should be off |
| 238 | */ |
| 239 | static void wfc_util_qcom_write_ota_enable(void) |
| 240 | { |
| 241 | /* |
| 242 | * write Beacon Mode Power Save off and L2 Roaming off |
| 243 | */ |
| 244 | char *PowerSaveOff = "0"; |
| 245 | //char *L2RoamingOff = "0"; |
| 246 | char *Heartbeat24 = "120"; |
| 247 | |
| 248 | char string_buff[5]; |
| 249 | |
| 250 | wfc_util_fset_string(WFC_UTIL_CFG_FILE_NAME, |
| 251 | WFC_UTIL_CFG_TAG_END_OF_CFG, |
| 252 | WFC_UTIL_CFG_TAG_IDLE_MODE_POWER_SAVE, |
| 253 | WFC_UTIL_CFG_TAG_END_OF_LINE, |
| 254 | PowerSaveOff); |
| 255 | |
| 256 | wfc_util_fset_string(WFC_UTIL_CFG_FILE_NAME, |
| 257 | WFC_UTIL_CFG_TAG_END_OF_CFG, |
| 258 | WFC_UTIL_CFG_TAG_POWER_SAVE, |
| 259 | WFC_UTIL_CFG_TAG_END_OF_LINE, |
| 260 | PowerSaveOff); |
| 261 | |
| 262 | /* We don't need to change this becasue the default value of WFC_UTIL_CFG_TAG_L2Roaming is 0. |
| 263 | wfc_util_fset_string(WFC_UTIL_CFG_FILE_NAME, |
| 264 | WFC_UTIL_CFG_TAG_END_OF_CFG, |
| 265 | WFC_UTIL_CFG_TAG_L2Roaming, |
| 266 | WFC_UTIL_CFG_TAG_END_OF_LINE, |
| 267 | L2RoamingOff); |
| 268 | */ |
| 269 | |
| 270 | if(0 < wfc_util_fget_string(WFC_UTIL_CFG_FILE_NAME, |
| 271 | WFC_UTIL_CFG_TAG_END_OF_CFG, |
| 272 | WFC_UTIL_CFG_TAG_HEARTBEAT24, |
| 273 | WFC_UTIL_CFG_TAG_END_OF_LINE, |
| 274 | string_buff, |
| 275 | 5)) { |
| 276 | wfc_util_fset_string(WFC_UTIL_CFG_FILE_NAME, |
| 277 | WFC_UTIL_CFG_TAG_END_OF_CFG, |
| 278 | WFC_UTIL_CFG_TAG_HEARTBEAT24, |
| 279 | WFC_UTIL_CFG_TAG_END_OF_LINE, |
| 280 | Heartbeat24); |
| 281 | } else { |
| 282 | wfc_util_log_error("%s is not exist", WFC_UTIL_CFG_TAG_HEARTBEAT24); |
| 283 | } |
| 284 | |
| 285 | return; |
| 286 | } |
| 287 | |
| 288 | /* |
| 289 | * When OTA is enabled, power save mode and L2 roaming trigger should be off |
| 290 | */ |
| 291 | static void wfc_util_qcom_write_ota_disable(void) |
| 292 | { |
| 293 | /* |
| 294 | * write Beacon Mode Power Save on and L2 Roaming on |
| 295 | */ |
| 296 | char *PowerSaveOff = "1"; |
| 297 | //char *L2RoamingOff = "1"; |
| 298 | char *Heartbeat24 = "40"; |
| 299 | |
| 300 | char string_buff[5]; |
| 301 | |
| 302 | wfc_util_fset_string(WFC_UTIL_CFG_FILE_NAME, |
| 303 | WFC_UTIL_CFG_TAG_END_OF_CFG, |
| 304 | WFC_UTIL_CFG_TAG_IDLE_MODE_POWER_SAVE, |
| 305 | WFC_UTIL_CFG_TAG_END_OF_LINE, |
| 306 | PowerSaveOff); |
| 307 | |
| 308 | wfc_util_fset_string(WFC_UTIL_CFG_FILE_NAME, |
| 309 | WFC_UTIL_CFG_TAG_END_OF_CFG, |
| 310 | WFC_UTIL_CFG_TAG_POWER_SAVE, |
| 311 | WFC_UTIL_CFG_TAG_END_OF_LINE, |
| 312 | PowerSaveOff); |
| 313 | |
| 314 | /* We don't need to change this becasue the default value of WFC_UTIL_CFG_TAG_L2Roaming is 0. |
| 315 | wfc_util_fset_string(WFC_UTIL_CFG_FILE_NAME, |
| 316 | WFC_UTIL_CFG_TAG_END_OF_CFG, |
| 317 | WFC_UTIL_CFG_TAG_L2Roaming, |
| 318 | WFC_UTIL_CFG_TAG_END_OF_LINE, |
| 319 | L2RoamingOff); |
| 320 | */ |
| 321 | |
| 322 | if(0 < wfc_util_fget_string(WFC_UTIL_CFG_FILE_NAME, |
| 323 | WFC_UTIL_CFG_TAG_END_OF_CFG, |
| 324 | WFC_UTIL_CFG_TAG_HEARTBEAT24, |
| 325 | WFC_UTIL_CFG_TAG_END_OF_LINE, |
| 326 | string_buff, |
| 327 | 5)) { |
| 328 | wfc_util_fset_string(WFC_UTIL_CFG_FILE_NAME, |
| 329 | WFC_UTIL_CFG_TAG_END_OF_CFG, |
| 330 | WFC_UTIL_CFG_TAG_HEARTBEAT24, |
| 331 | WFC_UTIL_CFG_TAG_END_OF_LINE, |
| 332 | Heartbeat24); |
| 333 | } else { |
| 334 | wfc_util_log_error("%s is not exist", WFC_UTIL_CFG_TAG_HEARTBEAT24); |
| 335 | } |
| 336 | |
| 337 | return; |
| 338 | } |
| 339 | |
| 340 | static void wfc_util_qcom_write_mac_to_bin(unsigned char *mac_add) |
| 341 | { |
| 342 | unsigned char nvValidityBitmap[WFC_UTIL_NV_BIN_HEADER_LENGTH]; |
| 343 | |
| 344 | if(0 != wfc_util_ffile_check(WFC_UTIL_NV_BIN_FILE_NAME, |
| 345 | F_OK|R_OK|W_OK)) { |
| 346 | wfc_util_log_error("We don't access file [%s]", WFC_UTIL_NV_BIN_FILE_NAME); |
| 347 | return; |
| 348 | } |
| 349 | |
| 350 | memset(nvValidityBitmap, 0, WFC_UTIL_NV_BIN_HEADER_LENGTH); |
| 351 | |
| 352 | /* |
| 353 | * Write RFT MAC Address |
| 354 | */ |
| 355 | wfc_util_fset_buffer(WFC_UTIL_NV_BIN_FILE_NAME, |
| 356 | WFC_UTIL_NV_BIN_POS_MAC_ADDR, |
| 357 | mac_add, |
| 358 | WFC_UTIL_CFG_LENGHT_MAC); |
| 359 | |
| 360 | /* |
| 361 | * Read NV validity bitmap |
| 362 | */ |
| 363 | if (0 < wfc_util_fget_buffer(WFC_UTIL_NV_BIN_FILE_NAME, |
| 364 | 0, |
| 365 | WFC_UTIL_NV_BIN_HEADER_LENGTH, |
| 366 | nvValidityBitmap, |
| 367 | WFC_UTIL_NV_BIN_HEADER_LENGTH)){ |
| 368 | /* |
| 369 | * Check whether Fields bit(Bit 1) is set |
| 370 | */ |
| 371 | if (0x02 & nvValidityBitmap[0]) { |
| 372 | wfc_util_log_info("We don't need to write the default value for NvFilelds"); |
| 373 | } else { |
| 374 | /* |
| 375 | * Update the Fields bit(Bit 1) |
| 376 | */ |
| 377 | nvValidityBitmap[0] |= 0x02; |
| 378 | wfc_util_fset_buffer(WFC_UTIL_NV_BIN_FILE_NAME, |
| 379 | 0, |
| 380 | nvValidityBitmap, |
| 381 | WFC_UTIL_NV_BIN_HEADER_LENGTH); |
| 382 | |
| 383 | /* |
| 384 | * Write the default value for NvFilelds |
| 385 | */ |
| 386 | wfc_util_fset_buffer(WFC_UTIL_NV_BIN_FILE_NAME, |
| 387 | WFC_UTIL_NV_BIN_POS_PRODUCT_ID, |
| 388 | nvFilelds_default, |
| 389 | 6); |
| 390 | } |
| 391 | } else { |
| 392 | wfc_util_log_error("Read Fail nvValidityBitmap"); |
| 393 | } |
| 394 | |
| 395 | return; |
| 396 | } |
| 397 | |
| 398 | /* |
| 399 | * wfc_util_qcom_reset_mac_to_bin |
| 400 | * |
| 401 | * reset the mac address of nv bin file |
| 402 | * |
| 403 | * return : void |
| 404 | */ |
| 405 | static void wfc_util_qcom_reset_mac_to_bin(void) |
| 406 | { |
| 407 | unsigned char mac_addr[WFC_UTIL_CFG_LENGHT_MAC]; |
| 408 | |
| 409 | if(0 != wfc_util_ffile_check(WFC_UTIL_NV_BIN_FILE_NAME, |
| 410 | F_OK|R_OK|W_OK)) { |
| 411 | wfc_util_log_error("We don't access file [%s]", WFC_UTIL_NV_BIN_FILE_NAME); |
| 412 | return; |
| 413 | } |
| 414 | |
| 415 | if(0 < wfc_util_fget_buffer(WFC_UTIL_NV_BIN_FILE_NAME, |
| 416 | WFC_UTIL_NV_BIN_POS_MAC_ADDR, |
| 417 | WFC_UTIL_CFG_LENGHT_MAC, |
| 418 | mac_addr, |
| 419 | WFC_UTIL_CFG_LENGHT_MAC)) { |
| 420 | if(0x00 == mac_addr[0] && 0x00 == mac_addr[1] && 0x00 == mac_addr[2] && |
| 421 | 0x00 == mac_addr[3] && 0x00 == mac_addr[4] && 0x00 == mac_addr[5]) |
| 422 | { |
| 423 | return; |
| 424 | } |
| 425 | } |
| 426 | |
| 427 | memset(mac_addr, 0, WFC_UTIL_CFG_LENGHT_MAC); |
| 428 | |
| 429 | wfc_util_fset_buffer(WFC_UTIL_NV_BIN_FILE_NAME, |
| 430 | WFC_UTIL_NV_BIN_POS_MAC_ADDR, |
| 431 | mac_addr, |
| 432 | WFC_UTIL_CFG_LENGHT_MAC); |
| 433 | |
| 434 | return; |
| 435 | } |
| 436 | |
| 437 | static int wfc_util_qcom_write_mac_process(unsigned char *nv_mac_addr, char *mac_add_buff) |
| 438 | { |
| 439 | char nv_mac_add_buff[WFC_UTIL_CFG_LENGHT_MAC_STRING+1]; |
| 440 | int is_default_nv_mac = 0; |
| 441 | int is_same_mac = -1; |
| 442 | |
| 443 | if (NULL == nv_mac_addr) { |
| 444 | return 0; |
| 445 | } |
| 446 | |
| 447 | wfc_util_htoa(nv_mac_addr, WFC_UTIL_CFG_LENGHT_MAC, |
| 448 | nv_mac_add_buff, WFC_UTIL_CFG_LENGHT_MAC_STRING+1); |
| 449 | |
| 450 | is_default_nv_mac = wfc_util_qcom_is_default_mac(nv_mac_add_buff); |
| 451 | |
| 452 | is_same_mac = strncmp(mac_add_buff, nv_mac_add_buff, WFC_UTIL_CFG_LENGHT_MAC_STRING); |
| 453 | |
| 454 | /* |
| 455 | * 1. nv mac address is not a default mac address |
| 456 | * 2. same with mac address of config file |
| 457 | */ |
| 458 | if (((!is_default_nv_mac) && (0==is_same_mac)) || |
| 459 | /* |
| 460 | * 1. nv mac address is RFT mac address |
| 461 | * 2. same with mac address of config file |
| 462 | */ |
| 463 | ((2==is_default_nv_mac) && (0==is_same_mac)) |
| 464 | ) { |
| 465 | return 1; |
| 466 | } |
| 467 | /* |
| 468 | * 1. nv mac address not a default mac address excepting RFT mac address |
| 469 | * 2. does not same with mac address of config file |
| 470 | */ |
| 471 | else if ((1!=is_default_nv_mac) && (0!=is_same_mac)) { |
| 472 | wfc_util_log_error("Change %s%s", WFC_UTIL_CFG_TAG_MAC_ADDRESS, nv_mac_add_buff); |
| 473 | /* |
| 474 | * Update MAC address |
| 475 | */ |
| 476 | wfc_util_qcom_write_mac(nv_mac_add_buff); |
| 477 | |
| 478 | #ifdef WFC_UTIL_FEATURE_DO_NOT_WRITE_MAC_TO_BIN |
| 479 | /* |
| 480 | * Write RFT MAC address to nv.bin |
| 481 | */ |
| 482 | if (2==is_default_nv_mac) { |
| 483 | wfc_util_qcom_write_mac_to_bin(nv_mac_addr); |
| 484 | /* |
| 485 | * reset mac address of nv.bin if nv_mac_addr is not RFT mac address |
| 486 | */ |
| 487 | } else { |
| 488 | wfc_util_qcom_reset_mac_to_bin(); |
| 489 | } |
| 490 | #else /* WFC_UTIL_FEATURE_DO_NOT_WRITE_MAC_TO_BIN */ |
| 491 | /* |
| 492 | * Write MAC address to nv.bin |
| 493 | */ |
| 494 | wfc_util_qcom_write_mac_to_bin(nv_mac_addr); |
| 495 | #endif /* WFC_UTIL_FEATURE_DO_NOT_WRITE_MAC_TO_BIN */ |
| 496 | |
| 497 | return 1; |
| 498 | } |
| 499 | |
| 500 | return 0; |
| 501 | } |
| 502 | |
| 503 | static void wfc_util_qcom_create_random_mac(void) |
| 504 | { |
| 505 | unsigned char random_mac_addr[WFC_UTIL_CFG_LENGHT_MAC]; |
| 506 | char mac_add_buff[WFC_UTIL_CFG_LENGHT_MAC_STRING+1]; |
| 507 | |
| 508 | wfc_util_log_info("wfc_util_qcom_create_random_mac"); |
| 509 | |
| 510 | wfc_util_random_mac(random_mac_addr); |
| 511 | |
| 512 | wfc_util_htoa(random_mac_addr, WFC_UTIL_CFG_LENGHT_MAC, mac_add_buff, WFC_UTIL_CFG_LENGHT_MAC_STRING+1); |
| 513 | |
| 514 | wfc_util_qcom_write_mac(mac_add_buff); |
| 515 | |
| 516 | #ifdef WFC_UTIL_FEATURE_DO_NOT_WRITE_MAC_TO_BIN |
| 517 | wfc_util_qcom_reset_mac_to_bin(); |
| 518 | #else /* WFC_UTIL_FEATURE_DO_NOT_WRITE_MAC_TO_BIN */ |
| 519 | wfc_util_qcom_write_mac_to_bin(random_mac_addr); |
| 520 | #endif /* WFC_UTIL_FEATURE_DO_NOT_WRITE_MAC_TO_BIN */ |
| 521 | |
| 522 | return; |
| 523 | } |
| 524 | |
| 525 | /* |
| 526 | * wfc_util_qcom_check_config |
| 527 | * |
| 528 | * check the qcom wlan driver config file |
| 529 | * |
| 530 | * return : it will return 0 if procedure is success |
| 531 | * or will return -1 if not. |
| 532 | */ |
| 533 | int wfc_util_qcom_check_config(unsigned char *nv_mac_addr) |
| 534 | { |
| 535 | char mac_add_buff[WFC_UTIL_CFG_LENGHT_MAC_STRING+1]; |
| 536 | |
| 537 | /* make sure driver config file exists */ |
| 538 | if(0 > wfc_util_ffile_check_copy(WFC_UTIL_CFG_FILE_NAME, |
| 539 | WFC_UTIL_CFG_TEMPFILE_NAME, |
| 540 | 0660, |
| 541 | AID_SYSTEM, |
| 542 | /* we use "radio" for gid to access from "rild" for AT cmd. */ |
| 543 | AID_WIFI/*AID_WIFI*/)) { |
| 544 | wfc_util_log_error("Fail to Access [%s]", WFC_UTIL_CFG_FILE_NAME); |
| 545 | return -1; |
| 546 | } |
| 547 | |
| 548 | #ifdef WFC_UTIL_FEAUTRE_COPY_NV_BIN |
| 549 | if(0 > wfc_util_ffile_check_copy(WFC_UTIL_NV_BIN_FILE_NAME, |
| 550 | WFC_UTIL_NV_BIN_TEMPFILE_NAME, |
| 551 | 0660, |
| 552 | AID_SYSTEM, |
| 553 | /* we use "radio" for gid to access from "rild" for AT cmd. */ |
| 554 | AID_WIFI/*AID_WIFI*/)) { |
| 555 | wfc_util_log_error("Fail to Access [%s]", WFC_UTIL_NV_BIN_FILE_NAME); |
| 556 | return -1; |
| 557 | } |
| 558 | #endif /* WFC_UTIL_FEAUTRE_COPY_NV_BIN */ |
| 559 | |
| 560 | /* |
| 561 | * Read MAC address from config file |
| 562 | */ |
| 563 | if(0 < wfc_util_fget_string(WFC_UTIL_CFG_FILE_NAME, |
| 564 | WFC_UTIL_CFG_TAG_END_OF_CFG, |
| 565 | WFC_UTIL_CFG_TAG_MAC_ADDRESS, |
| 566 | WFC_UTIL_CFG_TAG_END_OF_LINE, |
| 567 | mac_add_buff, |
| 568 | WFC_UTIL_CFG_LENGHT_MAC_STRING+1)) { |
| 569 | wfc_util_log_info("%s%s", WFC_UTIL_CFG_TAG_MAC_ADDRESS, mac_add_buff); |
| 570 | |
| 571 | /* |
| 572 | * Write nv mac address |
| 573 | */ |
| 574 | if (1 != wfc_util_qcom_write_mac_process(nv_mac_addr, mac_add_buff)) { |
| 575 | /* |
| 576 | * Check whether this is default mac address or not |
| 577 | */ |
| 578 | if (wfc_util_qcom_is_default_mac(mac_add_buff)) { |
| 579 | /* |
| 580 | * Create random MAC address |
| 581 | */ |
| 582 | wfc_util_qcom_create_random_mac(); |
| 583 | } |
| 584 | } |
| 585 | } else { |
| 586 | wfc_util_log_error("%s does not have mac address", WFC_UTIL_CFG_FILE_NAME); |
| 587 | |
| 588 | memset( mac_add_buff, 0, WFC_UTIL_CFG_LENGHT_MAC_STRING+1 ); |
| 589 | |
| 590 | /* |
| 591 | * Write nv mac address |
| 592 | */ |
| 593 | if (1 != wfc_util_qcom_write_mac_process(nv_mac_addr, mac_add_buff)) { |
| 594 | /* |
| 595 | * Create random MAC address |
| 596 | */ |
| 597 | wfc_util_qcom_create_random_mac(); |
| 598 | } |
| 599 | } |
| 600 | |
| 601 | return 0; |
| 602 | } |
| 603 | |
| 604 | /* |
| 605 | * wfc_util_qcom_reset_mac |
| 606 | * |
| 607 | * reset the mac address of config file |
| 608 | * |
| 609 | * return : void |
| 610 | */ |
| 611 | void wfc_util_qcom_reset_mac(void) |
| 612 | { |
| 613 | wfc_util_qcom_write_mac("000000000000"); |
| 614 | |
| 615 | wfc_util_qcom_reset_mac_to_bin(); |
| 616 | |
| 617 | return; |
| 618 | } |
| 619 | |
| 620 | /* |
| 621 | * wfc_util_qcom_ota_enable |
| 622 | * |
| 623 | * enable ota mode by reconfiguring BMPS and L2Roaming |
| 624 | * |
| 625 | * return : int (boolean) |
| 626 | */ |
| 627 | int wfc_util_qcom_ota_enable(void) |
| 628 | { |
| 629 | wfc_util_qcom_write_ota_enable(); |
| 630 | return 1; |
| 631 | } |
| 632 | |
| 633 | /* |
| 634 | * wfc_util_qcom_ota_disable |
| 635 | * |
| 636 | * disable ota mode by reconfiguring BMPS and L2Roaming |
| 637 | * |
| 638 | * return : int (boolean) |
| 639 | */ |
| 640 | int wfc_util_qcom_ota_disable(void) |
| 641 | { |
| 642 | wfc_util_qcom_write_ota_disable(); |
| 643 | return 1; |
| 644 | } |
| 645 | |
| 646 | /* |
| 647 | * wfc_util_qcom_checkt_roaming_off |
| 648 | * |
| 649 | * Check L2Roaming configuration |
| 650 | * |
| 651 | * return : int (boolean) |
| 652 | */ |
| 653 | int wfc_util_qcom_checkt_roaming_off(void) |
| 654 | { |
| 655 | char string_buff[5]; |
| 656 | /* |
| 657 | * check whether OTA test is enabled or not. |
| 658 | */ |
| 659 | if(0 < wfc_util_fget_string(WFC_UTIL_CFG_FILE_NAME, |
| 660 | WFC_UTIL_CFG_TAG_END_OF_CFG, |
| 661 | //WFC_UTIL_CFG_TAG_L2Roaming, |
| 662 | WFC_UTIL_CFG_TAG_POWER_SAVE, |
| 663 | WFC_UTIL_CFG_TAG_END_OF_LINE, |
| 664 | string_buff, |
| 665 | 5)) { |
| 666 | //wfc_util_log_info("%s%s", WFC_UTIL_CFG_TAG_L2Roaming, string_buff); |
| 667 | wfc_util_log_info("%s%s", WFC_UTIL_CFG_TAG_POWER_SAVE, string_buff); |
| 668 | if(0 == strncmp(string_buff, "0", 1)) { |
| 669 | return 1; |
| 670 | } |
| 671 | } |
| 672 | return 0; |
| 673 | } |
| 674 | |
| 675 | #endif /* CONFIG_LGE_WLAN_QCOM_PATCH */ |
| 676 | |