woojin.shin | 0bb6917 | 2012-08-17 20:03:54 +0900 | [diff] [blame] | 1 | XTRA_SERVER_1=http://xtra1.gpsonextra.net/xtra2.bin |
| 2 | XTRA_SERVER_2=http://xtra2.gpsonextra.net/xtra2.bin |
| 3 | XTRA_SERVER_3=http://xtra3.gpsonextra.net/xtra2.bin |
| 4 | |
| 5 | # DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info |
| 6 | # 4 - Debug, 5 - Verbose |
| 7 | DEBUG_LEVEL = 3 |
| 8 | |
| 9 | # Intermediate position report, 1=enable, 0=disable |
| 10 | INTERMEDIATE_POS=0 |
| 11 | |
| 12 | # supl version 1.0 |
| 13 | SUPL_VER=0x10000 |
| 14 | |
| 15 | # Error Estimate |
| 16 | # _SET = 1 |
| 17 | # _CLEAR = 0 |
| 18 | ERR_ESTIMATE=0 |
| 19 | |
| 20 | # GPS Capabilities bit mask |
| 21 | # SCHEDULING = 1 |
| 22 | # MSB = 2 |
| 23 | # MSA = 4 |
| 24 | # ULP = 0x20 |
| 25 | # default = MSA | MSB | SCHEDULING | ULP |
| 26 | CAPABILITIES=0x07 |
| 27 | |
| 28 | # Accuracy threshold for intermediate positions |
| 29 | # less accurate positions are ignored, 0 for passing all positions |
| 30 | # ACCURACY_THRES=5000 |
| 31 | |
| 32 | ################################ |
| 33 | ##### AGPS server settings ##### |
| 34 | ################################ |
| 35 | |
| 36 | # FOR SUPL SUPPORT, set the following |
| 37 | # SUPL_HOST=supl.host.com or IP |
| 38 | # SUPL_PORT=1234 |
| 39 | SUPL_HOST=supl.google.com |
| 40 | SUPL_PORT=7276 |
| 41 | |
| 42 | # FOR C2K PDE SUPPORT, set the following |
| 43 | # C2K_HOST=c2k.pde.com or IP |
| 44 | # C2K_PORT=1234 |
| 45 | |
| 46 | ################################ |
| 47 | # Sensor Settings |
| 48 | ################################ |
| 49 | |
| 50 | # Needs to be set explicitly based on sensor |
| 51 | # There is no default value. |
| 52 | #GYRO_BIAS_RANDOM_WALK= |
| 53 | |
| 54 | SENSOR_ACCEL_BATCHES_PER_SEC=2 |
| 55 | SENSOR_ACCEL_SAMPLES_PER_BATCH=5 |
| 56 | SENSOR_GYRO_BATCHES_PER_SEC=2 |
| 57 | SENSOR_GYRO_SAMPLES_PER_BATCH=5 |
| 58 | |
| 59 | # Sensor Control Mode (0=AUTO, 1=FORCE_ON) |
| 60 | SENSOR_CONTROL_MODE=0 |
| 61 | |
| 62 | # Enable or Disable Sensors for GPS use (0=Enable, 1=Disable) |
| 63 | SENSOR_USAGE=1 |
| 64 | |
| 65 | # Choose GSIFF sensor provider (1=DSPS, 2=Android NDK) |
| 66 | SENSOR_PROVIDER=1 |
| 67 | |
| 68 | ################################ |
| 69 | # Indoor Positioning Settings |
| 70 | ################################ |
| 71 | # 0: QUIPC disabled, 1: QUIPC enabled, 2: forced QUIPC only |
| 72 | QUIPC_ENABLED = 0 |
| 73 | |
| 74 | ################################ |
| 75 | # EXTRA SETTINGS |
| 76 | ################################ |
| 77 | # Enable or Disable Wiper (1=Enable, 0=Disable) |
| 78 | ENABLE_WIPER=0 |
| 79 | |
| 80 | #################################### |
| 81 | # LTE Positioning Profile Settings |
| 82 | #################################### |
| 83 | # 0: Enable RRLP on LTE(Default) 1: Enable LPP_User_Plane on LTE |
| 84 | LPP_PROFILE = 0 |