| Devin Kim | 2bae57d | 2013-09-10 17:04:30 -0700 | [diff] [blame] | 1 | # XTRA_SERVER_QUERY (1=on, 0=off) |
| 2 | # If XTRA_SERVER_QUERY is on, the XTRA_SERVERs listed |
| 3 | # below will be ignored, and instead the servers will |
| 4 | # be queried from the modem. |
| 5 | XTRA_SERVER_QUERY=0 |
| 6 | # XTRA_SERVERs below are used only if XTRA_SERVER_QUERY |
| 7 | # is off. |
| 8 | XTRA_SERVER_1=http://xtra1.gpsonextra.net/xtra2.bin |
| 9 | XTRA_SERVER_2=http://xtra2.gpsonextra.net/xtra2.bin |
| 10 | XTRA_SERVER_3=http://xtra3.gpsonextra.net/xtra2.bin |
| 11 | |
| 12 | # Error Estimate |
| 13 | # _SET = 1 |
| 14 | # _CLEAR = 0 |
| 15 | ERR_ESTIMATE=0 |
| 16 | |
| 17 | #Test |
| 18 | NTP_SERVER=time.gpsonextra.net |
| 19 | #Asia |
| 20 | # NTP_SERVER=asia.pool.ntp.org |
| 21 | #Europe |
| 22 | # NTP_SERVER=europe.pool.ntp.org |
| 23 | #North America |
| 24 | # NTP_SERVER=north-america.pool.ntp.org |
| 25 | |
| 26 | # DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info |
| 27 | # 4 - Debug, 5 - Verbose |
| 28 | # If DEBUG_LEVEL is commented, Android's logging levels will be used |
| 29 | DEBUG_LEVEL = 2 |
| 30 | |
| 31 | # Intermediate position report, 1=enable, 0=disable |
| 32 | INTERMEDIATE_POS=0 |
| 33 | |
| 34 | # supl version 1.0 |
| 35 | SUPL_VER=0x10000 |
| 36 | |
| 37 | # GPS Capabilities bit mask |
| 38 | # SCHEDULING = 0x01 |
| 39 | # MSB = 0x02 |
| 40 | # MSA = 0x04 |
| 41 | # ON_DEMAND_TIME = 0x10 |
| 42 | # GEOFENCE = 0x20 |
| 43 | # default = ON_DEMAND_TIME | MSA | MSB | SCHEDULING | GEOFENCE |
| 44 | CAPABILITIES=0x33 |
| 45 | |
| 46 | # Accuracy threshold for intermediate positions |
| 47 | # less accurate positions are ignored, 0 for passing all positions |
| 48 | # ACCURACY_THRES=5000 |
| 49 | |
| 50 | ################################ |
| 51 | ##### AGPS server settings ##### |
| 52 | ################################ |
| 53 | |
| 54 | # FOR SUPL SUPPORT, set the following |
| 55 | # SUPL_HOST=supl.host.com or IP |
| 56 | # SUPL_PORT=1234 |
| 57 | SUPL_HOST=supl.google.com |
| 58 | SUPL_PORT=7275 |
| 59 | |
| 60 | # FOR C2K PDE SUPPORT, set the following |
| 61 | # C2K_HOST=c2k.pde.com or IP |
| 62 | # C2K_PORT=1234 |
| 63 | |
| 64 | #################################### |
| 65 | # LTE Positioning Profile Settings |
| 66 | #################################### |
| 67 | # 0: Enable RRLP on LTE(Default) |
| 68 | # 1: Enable LPP_User_Plane on LTE |
| 69 | # 2: Enable LPP_Control_Plane |
| 70 | # 3: Enable both LPP_User_Plane and LPP_Control_Plane |
| 71 | LPP_PROFILE = 0 |
| 72 | |
| 73 | ################################ |
| 74 | # EXTRA SETTINGS |
| 75 | ################################ |
| 76 | # NMEA provider (1=Modem Processor, 0=Application Processor) |
| 77 | NMEA_PROVIDER=0 |
| 78 | |
| 79 | ################################################## |
| 80 | # Select Positioning Protocol on A-GLONASS system |
| 81 | ################################################## |
| 82 | # 0x1: RRC CPlane |
| 83 | # 0x2: RRLP UPlane |
| 84 | # 0x4: LLP Uplane |
| 85 | A_GLONASS_POS_PROTOCOL_SELECT = 0 |