arch/arm/mach-msm/qdsp5v2/snddev_ecodec.c - fp2-dev/kernel/msm - Gitiles

 /* Copyright (c) 2009,2011 The Linux Foundation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 and
  * only version 2 as published by the Free Software Foundation.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  */
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <asm/uaccess.h>
 #include <mach/qdsp5v2/snddev_ecodec.h>
 #include <mach/qdsp5v2/audio_dev_ctl.h>
 #include <mach/qdsp5v2/audio_interct.h>
 #include <mach/qdsp5v2/aux_pcm.h>
 #include <mach/qdsp5v2/afe.h>
 #include <mach/debug_mm.h>
 #include <linux/slab.h>

 /* Context for each external codec device */
 struct snddev_ecodec_state {
 	struct snddev_ecodec_data *data;
 	u32 sample_rate;
 	bool enabled;
 };

 /* Global state for the driver */
 struct snddev_ecodec_drv_state {
 	struct mutex dev_lock;
 	u32 rx_active; /* ensure one rx device at a time */
 	u32 tx_active; /* ensure one tx device at a time */
 	struct clk *lpa_core_clk;
 	struct clk *ecodec_clk;
 };

 #define ADSP_CTL 1

 static struct snddev_ecodec_drv_state snddev_ecodec_drv;

 static int snddev_ecodec_open_rx(struct snddev_ecodec_state *ecodec)
 {
 	int rc = 0;
 	struct snddev_ecodec_drv_state *drv = &snddev_ecodec_drv;
 	struct msm_afe_config afe_config;
 	int ret = 0;

 	MM_DBG("snddev_ecodec_open_rx\n");

 	if (!drv->tx_active) {
 		/* request GPIO */
 		rc = aux_pcm_gpios_request();
 		if (rc) {
 			MM_ERR("GPIO enable failed\n");
 			goto done;
 		}
 		/* config clocks */
 		clk_prepare_enable(drv->lpa_core_clk);

 		/*if long sync is selected in aux PCM interface
 		ecodec clock is updated to work with 128KHz,
 		if short sync is selected ecodec clock is updated to
 		work with 2.048MHz frequency, actual clock output is
 		different than the SW configuration by factor of two*/
 		if (!(ecodec->data->conf_aux_codec_intf &
 			AUX_CODEC_CTL__AUX_CODEC_MODE__I2S_V)) {
 			if (ecodec->data->conf_aux_codec_intf &
 				AUX_CODEC_CTL__AUX_PCM_MODE__AUX_MASTER_V) {
 				MM_DBG("Update ecodec clock to 128 KHz, long "
 					"sync in master mode is selected\n");
 				ret = clk_set_rate(drv->ecodec_clk, 256000);
 				if (ret < 0)
 					MM_ERR("Error updating ecodec clock"
 							" to 128KHz\n");
 			} else if (ecodec->data->conf_aux_codec_intf &
 				AUX_CODEC_CTL__AUX_PCM_MODE__PRIM_SLAVE_V) {
 				MM_DBG("Update ecodec clock to 2 MHz, short"
 					" sync in slave mode is selected\n");
 				ret = clk_set_rate(drv->ecodec_clk, 4096000);
 				if (ret < 0)
 					MM_ERR("Error updating ecodec clock"
 							" to 2.048MHz\n");
 			} else {
 				MM_DBG("Update ecodec clock to 2 MHz, short"
 					" sync in master mode is selected\n");
 				ret = clk_set_rate(drv->ecodec_clk, 4096000);
 				if (ret < 0)
 					MM_ERR("Error updating ecodec clock"
 							" to 2.048MHz\n");
 			}
 		}

 		/* enable ecodec clk */
 		clk_prepare_enable(drv->ecodec_clk);

 		/* let ADSP confiure AUX PCM regs */
 		aux_codec_adsp_codec_ctl_en(ADSP_CTL);

 		/* let adsp configure pcm path */
 		aux_codec_pcm_path_ctl_en(ADSP_CTL);

 		/* choose ADSP_A */
 		audio_interct_aux_regsel(AUDIO_ADSP_A);
 		audio_interct_tpcm_source(AUDIO_ADSP_A);
 		audio_interct_rpcm_source(AUDIO_ADSP_A);

 		clk_disable_unprepare(drv->lpa_core_clk);

 		/* send AUX_CODEC_CONFIG to AFE */
 		rc = afe_config_aux_codec(ecodec->data->conf_pcm_ctl_val,
 				ecodec->data->conf_aux_codec_intf,
 				ecodec->data->conf_data_format_padding_val);
 		if (IS_ERR_VALUE(rc))
 			goto error;
 	}
 	/* send CODEC CONFIG to AFE */
 	afe_config.sample_rate = ecodec->sample_rate / 1000;
 	afe_config.channel_mode = ecodec->data->channel_mode;
 	afe_config.volume = AFE_VOLUME_UNITY;
 	rc = afe_enable(AFE_HW_PATH_AUXPCM_RX, &afe_config);
 	if (IS_ERR_VALUE(rc)) {
 		if (!drv->tx_active) {
 			aux_pcm_gpios_free();
 			clk_disable_unprepare(drv->ecodec_clk);
 		}
 		goto done;
 	}

 	ecodec->enabled = 1;
 	return 0;

 error:
 	aux_pcm_gpios_free();
 	clk_disable_unprepare(drv->ecodec_clk);
 done:
 	return rc;
 }

 static int snddev_ecodec_close_rx(struct snddev_ecodec_state *ecodec)
 {
 	struct snddev_ecodec_drv_state *drv = &snddev_ecodec_drv;

 	/* free GPIO */
 	if (!drv->tx_active) {
 		aux_pcm_gpios_free();
 		clk_disable_unprepare(drv->ecodec_clk);
 	}

 	/* disable AFE */
 	afe_disable(AFE_HW_PATH_AUXPCM_RX);

 	ecodec->enabled = 0;

 	return 0;
 }

 static int snddev_ecodec_open_tx(struct snddev_ecodec_state *ecodec)
 {
 	int rc = 0;
 	struct snddev_ecodec_drv_state *drv = &snddev_ecodec_drv;
 	struct msm_afe_config afe_config;
 	int ret = 0;

 	MM_DBG("snddev_ecodec_open_tx\n");

 	/* request GPIO */
 	if (!drv->rx_active) {
 		rc = aux_pcm_gpios_request();
 		if (rc) {
 			MM_ERR("GPIO enable failed\n");
 			goto done;
 		}
 		/* config clocks */
 		clk_prepare_enable(drv->lpa_core_clk);

 		/*if long sync is selected in aux PCM interface
 		ecodec clock is updated to work with 128KHz,
 		if short sync is selected ecodec clock is updated to
 		work with 2.048MHz frequency, actual clock output is
 		different than the SW configuration by factor of two*/
 		if (!(ecodec->data->conf_aux_codec_intf &
 			AUX_CODEC_CTL__AUX_CODEC_MODE__I2S_V)) {
 			if (ecodec->data->conf_aux_codec_intf &
 				AUX_CODEC_CTL__AUX_PCM_MODE__AUX_MASTER_V) {
 				MM_DBG("Update ecodec clock to 128 KHz, long "
 					"sync in master mode is selected\n");
 				ret = clk_set_rate(drv->ecodec_clk, 256000);
 				if (ret < 0)
 					MM_ERR("Error updating ecodec clock"
 							" to 128KHz\n");
 			} else if (ecodec->data->conf_aux_codec_intf &
 				AUX_CODEC_CTL__AUX_PCM_MODE__PRIM_SLAVE_V) {
 				MM_DBG("Update ecodec clock to 2 MHz, short"
 					" sync in slave mode is selected\n");
 				ret = clk_set_rate(drv->ecodec_clk, 4096000);
 				if (ret < 0)
 					MM_ERR("Error updating ecodec clock"
 							" to 2.048MHz\n");
 			} else {
 				MM_DBG("Update ecodec clock to 2 MHz, short"
 					" sync in master mode is selected\n");
 				ret = clk_set_rate(drv->ecodec_clk, 4096000);
 				if (ret < 0)
 					MM_ERR("Error updating ecodec clock"
 							" to 2.048MHz\n");
 			}
 		}

 		/* enable ecodec clk */
 		clk_prepare_enable(drv->ecodec_clk);

 		/* let ADSP confiure AUX PCM regs */
 		aux_codec_adsp_codec_ctl_en(ADSP_CTL);

 		/* let adsp configure pcm path */
 		aux_codec_pcm_path_ctl_en(ADSP_CTL);

 		/* choose ADSP_A */
 		audio_interct_aux_regsel(AUDIO_ADSP_A);
 		audio_interct_tpcm_source(AUDIO_ADSP_A);
 		audio_interct_rpcm_source(AUDIO_ADSP_A);

 		clk_disable_unprepare(drv->lpa_core_clk);

 		/* send AUX_CODEC_CONFIG to AFE */
 		rc = afe_config_aux_codec(ecodec->data->conf_pcm_ctl_val,
 			ecodec->data->conf_aux_codec_intf,
 			ecodec->data->conf_data_format_padding_val);
 		if (IS_ERR_VALUE(rc))
 			goto error;
 	}
 	/* send CODEC CONFIG to AFE */
 	afe_config.sample_rate = ecodec->sample_rate / 1000;
 	afe_config.channel_mode = ecodec->data->channel_mode;
 	afe_config.volume = AFE_VOLUME_UNITY;
 	rc = afe_enable(AFE_HW_PATH_AUXPCM_TX, &afe_config);
 	if (IS_ERR_VALUE(rc)) {
 		if (!drv->rx_active) {
 			aux_pcm_gpios_free();
 			clk_disable_unprepare(drv->ecodec_clk);
 		}
 		goto done;
 	}

 	ecodec->enabled = 1;
 	return 0;

 error:
 	clk_disable_unprepare(drv->ecodec_clk);
 	aux_pcm_gpios_free();
 done:
 	return rc;
 }

 static int snddev_ecodec_close_tx(struct snddev_ecodec_state *ecodec)
 {
 	struct snddev_ecodec_drv_state *drv = &snddev_ecodec_drv;

 	/* free GPIO */
 	if (!drv->rx_active) {
 		aux_pcm_gpios_free();
 		clk_disable_unprepare(drv->ecodec_clk);
 	}

 	/* disable AFE */
 	afe_disable(AFE_HW_PATH_AUXPCM_TX);

 	ecodec->enabled = 0;

 	return 0;
 }


 static int snddev_ecodec_open(struct msm_snddev_info *dev_info)
 {
 	int rc = 0;
 	struct snddev_ecodec_state *ecodec;
 	struct snddev_ecodec_drv_state *drv = &snddev_ecodec_drv;

 	if (!dev_info) {
 		rc = -EINVAL;
 		goto error;
 	}

 	ecodec = dev_info->private_data;

 	if (ecodec->data->capability & SNDDEV_CAP_RX) {
 		mutex_lock(&drv->dev_lock);
 		if (drv->rx_active) {
 			mutex_unlock(&drv->dev_lock);
 			rc = -EBUSY;
 			goto error;
 		}
 		rc = snddev_ecodec_open_rx(ecodec);
 		if (!IS_ERR_VALUE(rc))
 			drv->rx_active = 1;
 		mutex_unlock(&drv->dev_lock);
 	} else {
 		mutex_lock(&drv->dev_lock);
 		if (drv->tx_active) {
 			mutex_unlock(&drv->dev_lock);
 			rc = -EBUSY;
 			goto error;
 		}
 		rc = snddev_ecodec_open_tx(ecodec);
 		if (!IS_ERR_VALUE(rc))
 			drv->tx_active = 1;
 		mutex_unlock(&drv->dev_lock);
 	}
 error:
 	return rc;
 }

 static int snddev_ecodec_close(struct msm_snddev_info *dev_info)
 {
 	int rc = 0;
 	struct snddev_ecodec_state *ecodec;
 	struct snddev_ecodec_drv_state *drv = &snddev_ecodec_drv;
 	if (!dev_info) {
 		rc = -EINVAL;
 		goto error;
 	}

 	ecodec = dev_info->private_data;

 	if (ecodec->data->capability & SNDDEV_CAP_RX) {
 		mutex_lock(&drv->dev_lock);
 		if (!drv->rx_active) {
 			mutex_unlock(&drv->dev_lock);
 			rc = -EPERM;
 			goto error;
 		}
 		rc = snddev_ecodec_close_rx(ecodec);
 		if (!IS_ERR_VALUE(rc))
 			drv->rx_active = 0;
 		mutex_unlock(&drv->dev_lock);
 	} else {
 		mutex_lock(&drv->dev_lock);
 		if (!drv->tx_active) {
 			mutex_unlock(&drv->dev_lock);
 			rc = -EPERM;
 			goto error;
 		}
 		rc = snddev_ecodec_close_tx(ecodec);
 		if (!IS_ERR_VALUE(rc))
 			drv->tx_active = 0;
 		mutex_unlock(&drv->dev_lock);
 	}

 error:
 	return rc;
 }

 static int snddev_ecodec_set_freq(struct msm_snddev_info *dev_info, u32 rate)
 {
 	int rc = 0;

 	if (!dev_info) {
 		rc = -EINVAL;
 		goto error;
 	}
 	return 8000;

 error:
 	return rc;
 }

 static int snddev_ecodec_probe(struct platform_device *pdev)
 {
 	int rc = 0, i;
 	struct snddev_ecodec_data *pdata;
 	struct msm_snddev_info *dev_info;
 	struct snddev_ecodec_state *ecodec;

 	if (!pdev || !pdev->dev.platform_data) {
 		printk(KERN_ALERT "Invalid caller \n");
 		rc = -1;
 		goto error;
 	}
 	pdata = pdev->dev.platform_data;

 	ecodec = kzalloc(sizeof(struct snddev_ecodec_state), GFP_KERNEL);
 	if (!ecodec) {
 		rc = -ENOMEM;
 		goto error;
 	}

 	dev_info = kzalloc(sizeof(struct msm_snddev_info), GFP_KERNEL);
 	if (!dev_info) {
 		kfree(ecodec);
 		rc = -ENOMEM;
 		goto error;
 	}

 	dev_info->name = pdata->name;
 	dev_info->copp_id = pdata->copp_id;
 	dev_info->acdb_id = pdata->acdb_id;
 	dev_info->private_data = (void *) ecodec;
 	dev_info->dev_ops.open = snddev_ecodec_open;
 	dev_info->dev_ops.close = snddev_ecodec_close;
 	dev_info->dev_ops.set_freq = snddev_ecodec_set_freq;
 	dev_info->dev_ops.enable_sidetone = NULL;
 	dev_info->capability = pdata->capability;
 	dev_info->opened = 0;

 	msm_snddev_register(dev_info);
 	ecodec->data = pdata;
 	ecodec->sample_rate = 8000; /* Default to 8KHz */
 	 if (pdata->capability & SNDDEV_CAP_RX) {
 		for (i = 0; i < VOC_RX_VOL_ARRAY_NUM; i++) {
 			dev_info->max_voc_rx_vol[i] =
 				pdata->max_voice_rx_vol[i];
 			dev_info->min_voc_rx_vol[i] =
 				pdata->min_voice_rx_vol[i];
 		}
 	}
 error:
 	return rc;
 }

 static int snddev_ecodec_remove(struct platform_device *pdev)
 {
 	return 0;
 }

 static struct platform_driver snddev_ecodec_driver = {
 	.probe = snddev_ecodec_probe,
 	.remove = snddev_ecodec_remove,
 	.driver = { .name = "msm_snddev_ecodec" }
 };

 static int __init snddev_ecodec_init(void)
 {
 	int rc = 0;
 	struct snddev_ecodec_drv_state *ecodec_drv = &snddev_ecodec_drv;

 	MM_INFO("snddev_ecodec_init\n");
 	rc = platform_driver_register(&snddev_ecodec_driver);
 	if (IS_ERR_VALUE(rc))
 		goto error_platform_driver;
 	ecodec_drv->ecodec_clk = clk_get(NULL, "ecodec_clk");
 	if (IS_ERR(ecodec_drv->ecodec_clk))
 		goto error_ecodec_clk;
 	ecodec_drv->lpa_core_clk = clk_get(NULL, "lpa_core_clk");
 	if (IS_ERR(ecodec_drv->lpa_core_clk))
 		goto error_lpa_core_clk;


 	mutex_init(&ecodec_drv->dev_lock);
 	ecodec_drv->rx_active = 0;
 	ecodec_drv->tx_active = 0;
 	return 0;

 error_lpa_core_clk:
 	clk_put(ecodec_drv->ecodec_clk);
 error_ecodec_clk:
 	platform_driver_unregister(&snddev_ecodec_driver);
 error_platform_driver:

 	MM_ERR("encounter error\n");
 	return -ENODEV;
 }

 static void __exit snddev_ecodec_exit(void)
 {
 	struct snddev_ecodec_drv_state *ecodec_drv = &snddev_ecodec_drv;

 	platform_driver_unregister(&snddev_ecodec_driver);
 	clk_put(ecodec_drv->ecodec_clk);

 	return;
 }

 module_init(snddev_ecodec_init);
 module_exit(snddev_ecodec_exit);

 MODULE_DESCRIPTION("ECodec Sound Device driver");
 MODULE_VERSION("1.0");
 MODULE_LICENSE("GPL v2");
	/* Copyright (c) 2009,2011 The Linux Foundation. All rights reserved.
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License version 2 and
	* only version 2 as published by the Free Software Foundation.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	*/
	#include <linux/module.h>
	#include <linux/platform_device.h>
	#include <linux/clk.h>
	#include <linux/err.h>
	#include <asm/uaccess.h>
	#include <mach/qdsp5v2/snddev_ecodec.h>
	#include <mach/qdsp5v2/audio_dev_ctl.h>
	#include <mach/qdsp5v2/audio_interct.h>
	#include <mach/qdsp5v2/aux_pcm.h>
	#include <mach/qdsp5v2/afe.h>
	#include <mach/debug_mm.h>
	#include <linux/slab.h>

	/* Context for each external codec device */
	struct snddev_ecodec_state {
	struct snddev_ecodec_data *data;
	u32 sample_rate;
	bool enabled;
	};

	/* Global state for the driver */
	struct snddev_ecodec_drv_state {
	struct mutex dev_lock;
	u32 rx_active; /* ensure one rx device at a time */
	u32 tx_active; /* ensure one tx device at a time */
	struct clk *lpa_core_clk;
	struct clk *ecodec_clk;
	};

	#define ADSP_CTL 1

	static struct snddev_ecodec_drv_state snddev_ecodec_drv;

	static int snddev_ecodec_open_rx(struct snddev_ecodec_state *ecodec)
	{
	int rc = 0;
	struct snddev_ecodec_drv_state *drv = &snddev_ecodec_drv;
	struct msm_afe_config afe_config;
	int ret = 0;

	MM_DBG("snddev_ecodec_open_rx\n");

	if (!drv->tx_active) {
	/* request GPIO */
	rc = aux_pcm_gpios_request();
	if (rc) {
	MM_ERR("GPIO enable failed\n");
	goto done;
	}
	/* config clocks */
	clk_prepare_enable(drv->lpa_core_clk);

	/*if long sync is selected in aux PCM interface
	ecodec clock is updated to work with 128KHz,
	if short sync is selected ecodec clock is updated to
	work with 2.048MHz frequency, actual clock output is
	different than the SW configuration by factor of two*/
	if (!(ecodec->data->conf_aux_codec_intf &
	AUX_CODEC_CTL__AUX_CODEC_MODE__I2S_V)) {
	if (ecodec->data->conf_aux_codec_intf &
	AUX_CODEC_CTL__AUX_PCM_MODE__AUX_MASTER_V) {
	MM_DBG("Update ecodec clock to 128 KHz, long "
	"sync in master mode is selected\n");
	ret = clk_set_rate(drv->ecodec_clk, 256000);
	if (ret < 0)
	MM_ERR("Error updating ecodec clock"
	" to 128KHz\n");
	} else if (ecodec->data->conf_aux_codec_intf &
	AUX_CODEC_CTL__AUX_PCM_MODE__PRIM_SLAVE_V) {
	MM_DBG("Update ecodec clock to 2 MHz, short"
	" sync in slave mode is selected\n");
	ret = clk_set_rate(drv->ecodec_clk, 4096000);
	if (ret < 0)
	MM_ERR("Error updating ecodec clock"
	" to 2.048MHz\n");
	} else {
	MM_DBG("Update ecodec clock to 2 MHz, short"
	" sync in master mode is selected\n");
	ret = clk_set_rate(drv->ecodec_clk, 4096000);
	if (ret < 0)
	MM_ERR("Error updating ecodec clock"
	" to 2.048MHz\n");
	}
	}

	/* enable ecodec clk */
	clk_prepare_enable(drv->ecodec_clk);

	/* let ADSP confiure AUX PCM regs */
	aux_codec_adsp_codec_ctl_en(ADSP_CTL);

	/* let adsp configure pcm path */
	aux_codec_pcm_path_ctl_en(ADSP_CTL);

	/* choose ADSP_A */
	audio_interct_aux_regsel(AUDIO_ADSP_A);
	audio_interct_tpcm_source(AUDIO_ADSP_A);
	audio_interct_rpcm_source(AUDIO_ADSP_A);

	clk_disable_unprepare(drv->lpa_core_clk);

	/* send AUX_CODEC_CONFIG to AFE */
	rc = afe_config_aux_codec(ecodec->data->conf_pcm_ctl_val,
	ecodec->data->conf_aux_codec_intf,
	ecodec->data->conf_data_format_padding_val);
	if (IS_ERR_VALUE(rc))
	goto error;
	}
	/* send CODEC CONFIG to AFE */
	afe_config.sample_rate = ecodec->sample_rate / 1000;
	afe_config.channel_mode = ecodec->data->channel_mode;
	afe_config.volume = AFE_VOLUME_UNITY;
	rc = afe_enable(AFE_HW_PATH_AUXPCM_RX, &afe_config);
	if (IS_ERR_VALUE(rc)) {
	if (!drv->tx_active) {
	aux_pcm_gpios_free();
	clk_disable_unprepare(drv->ecodec_clk);
	}
	goto done;
	}

	ecodec->enabled = 1;
	return 0;

	error:
	aux_pcm_gpios_free();
	clk_disable_unprepare(drv->ecodec_clk);
	done:
	return rc;
	}

	static int snddev_ecodec_close_rx(struct snddev_ecodec_state *ecodec)
	{
	struct snddev_ecodec_drv_state *drv = &snddev_ecodec_drv;

	/* free GPIO */
	if (!drv->tx_active) {
	aux_pcm_gpios_free();
	clk_disable_unprepare(drv->ecodec_clk);
	}

	/* disable AFE */
	afe_disable(AFE_HW_PATH_AUXPCM_RX);

	ecodec->enabled = 0;

	return 0;
	}

	static int snddev_ecodec_open_tx(struct snddev_ecodec_state *ecodec)
	{
	int rc = 0;
	struct snddev_ecodec_drv_state *drv = &snddev_ecodec_drv;
	struct msm_afe_config afe_config;
	int ret = 0;

	MM_DBG("snddev_ecodec_open_tx\n");

	/* request GPIO */
	if (!drv->rx_active) {
	rc = aux_pcm_gpios_request();
	if (rc) {
	MM_ERR("GPIO enable failed\n");
	goto done;
	}
	/* config clocks */
	clk_prepare_enable(drv->lpa_core_clk);

	/*if long sync is selected in aux PCM interface
	ecodec clock is updated to work with 128KHz,
	if short sync is selected ecodec clock is updated to
	work with 2.048MHz frequency, actual clock output is
	different than the SW configuration by factor of two*/
	if (!(ecodec->data->conf_aux_codec_intf &
	AUX_CODEC_CTL__AUX_CODEC_MODE__I2S_V)) {
	if (ecodec->data->conf_aux_codec_intf &
	AUX_CODEC_CTL__AUX_PCM_MODE__AUX_MASTER_V) {
	MM_DBG("Update ecodec clock to 128 KHz, long "
	"sync in master mode is selected\n");
	ret = clk_set_rate(drv->ecodec_clk, 256000);
	if (ret < 0)
	MM_ERR("Error updating ecodec clock"
	" to 128KHz\n");
	} else if (ecodec->data->conf_aux_codec_intf &
	AUX_CODEC_CTL__AUX_PCM_MODE__PRIM_SLAVE_V) {
	MM_DBG("Update ecodec clock to 2 MHz, short"
	" sync in slave mode is selected\n");
	ret = clk_set_rate(drv->ecodec_clk, 4096000);
	if (ret < 0)
	MM_ERR("Error updating ecodec clock"
	" to 2.048MHz\n");
	} else {
	MM_DBG("Update ecodec clock to 2 MHz, short"
	" sync in master mode is selected\n");
	ret = clk_set_rate(drv->ecodec_clk, 4096000);
	if (ret < 0)
	MM_ERR("Error updating ecodec clock"
	" to 2.048MHz\n");
	}
	}

	/* enable ecodec clk */
	clk_prepare_enable(drv->ecodec_clk);

	/* let ADSP confiure AUX PCM regs */
	aux_codec_adsp_codec_ctl_en(ADSP_CTL);

	/* let adsp configure pcm path */
	aux_codec_pcm_path_ctl_en(ADSP_CTL);

	/* choose ADSP_A */
	audio_interct_aux_regsel(AUDIO_ADSP_A);
	audio_interct_tpcm_source(AUDIO_ADSP_A);
	audio_interct_rpcm_source(AUDIO_ADSP_A);

	clk_disable_unprepare(drv->lpa_core_clk);

	/* send AUX_CODEC_CONFIG to AFE */
	rc = afe_config_aux_codec(ecodec->data->conf_pcm_ctl_val,
	ecodec->data->conf_aux_codec_intf,
	ecodec->data->conf_data_format_padding_val);
	if (IS_ERR_VALUE(rc))
	goto error;
	}
	/* send CODEC CONFIG to AFE */
	afe_config.sample_rate = ecodec->sample_rate / 1000;
	afe_config.channel_mode = ecodec->data->channel_mode;
	afe_config.volume = AFE_VOLUME_UNITY;
	rc = afe_enable(AFE_HW_PATH_AUXPCM_TX, &afe_config);
	if (IS_ERR_VALUE(rc)) {
	if (!drv->rx_active) {
	aux_pcm_gpios_free();
	clk_disable_unprepare(drv->ecodec_clk);
	}
	goto done;
	}

	ecodec->enabled = 1;
	return 0;

	error:
	clk_disable_unprepare(drv->ecodec_clk);
	aux_pcm_gpios_free();
	done:
	return rc;
	}

	static int snddev_ecodec_close_tx(struct snddev_ecodec_state *ecodec)
	{
	struct snddev_ecodec_drv_state *drv = &snddev_ecodec_drv;

	/* free GPIO */
	if (!drv->rx_active) {
	aux_pcm_gpios_free();
	clk_disable_unprepare(drv->ecodec_clk);
	}

	/* disable AFE */
	afe_disable(AFE_HW_PATH_AUXPCM_TX);

	ecodec->enabled = 0;

	return 0;
	}


	static int snddev_ecodec_open(struct msm_snddev_info *dev_info)
	{
	int rc = 0;
	struct snddev_ecodec_state *ecodec;
	struct snddev_ecodec_drv_state *drv = &snddev_ecodec_drv;

	if (!dev_info) {
	rc = -EINVAL;
	goto error;
	}

	ecodec = dev_info->private_data;

	if (ecodec->data->capability & SNDDEV_CAP_RX) {
	mutex_lock(&drv->dev_lock);
	if (drv->rx_active) {
	mutex_unlock(&drv->dev_lock);
	rc = -EBUSY;
	goto error;
	}
	rc = snddev_ecodec_open_rx(ecodec);
	if (!IS_ERR_VALUE(rc))
	drv->rx_active = 1;
	mutex_unlock(&drv->dev_lock);
	} else {
	mutex_lock(&drv->dev_lock);
	if (drv->tx_active) {
	mutex_unlock(&drv->dev_lock);
	rc = -EBUSY;
	goto error;
	}
	rc = snddev_ecodec_open_tx(ecodec);
	if (!IS_ERR_VALUE(rc))
	drv->tx_active = 1;
	mutex_unlock(&drv->dev_lock);
	}
	error:
	return rc;
	}

	static int snddev_ecodec_close(struct msm_snddev_info *dev_info)
	{
	int rc = 0;
	struct snddev_ecodec_state *ecodec;
	struct snddev_ecodec_drv_state *drv = &snddev_ecodec_drv;
	if (!dev_info) {
	rc = -EINVAL;
	goto error;
	}

	ecodec = dev_info->private_data;

	if (ecodec->data->capability & SNDDEV_CAP_RX) {
	mutex_lock(&drv->dev_lock);
	if (!drv->rx_active) {
	mutex_unlock(&drv->dev_lock);
	rc = -EPERM;
	goto error;
	}
	rc = snddev_ecodec_close_rx(ecodec);
	if (!IS_ERR_VALUE(rc))
	drv->rx_active = 0;
	mutex_unlock(&drv->dev_lock);
	} else {
	mutex_lock(&drv->dev_lock);
	if (!drv->tx_active) {
	mutex_unlock(&drv->dev_lock);
	rc = -EPERM;
	goto error;
	}
	rc = snddev_ecodec_close_tx(ecodec);
	if (!IS_ERR_VALUE(rc))
	drv->tx_active = 0;
	mutex_unlock(&drv->dev_lock);
	}

	error:
	return rc;
	}

	static int snddev_ecodec_set_freq(struct msm_snddev_info *dev_info, u32 rate)
	{
	int rc = 0;

	if (!dev_info) {
	rc = -EINVAL;
	goto error;
	}
	return 8000;

	error:
	return rc;
	}

	static int snddev_ecodec_probe(struct platform_device *pdev)
	{
	int rc = 0, i;
	struct snddev_ecodec_data *pdata;
	struct msm_snddev_info *dev_info;
	struct snddev_ecodec_state *ecodec;

	if (!pdev \|\| !pdev->dev.platform_data) {
	printk(KERN_ALERT "Invalid caller \n");
	rc = -1;
	goto error;
	}
	pdata = pdev->dev.platform_data;

	ecodec = kzalloc(sizeof(struct snddev_ecodec_state), GFP_KERNEL);
	if (!ecodec) {
	rc = -ENOMEM;
	goto error;
	}

	dev_info = kzalloc(sizeof(struct msm_snddev_info), GFP_KERNEL);
	if (!dev_info) {
	kfree(ecodec);
	rc = -ENOMEM;
	goto error;
	}

	dev_info->name = pdata->name;
	dev_info->copp_id = pdata->copp_id;
	dev_info->acdb_id = pdata->acdb_id;
	dev_info->private_data = (void *) ecodec;
	dev_info->dev_ops.open = snddev_ecodec_open;
	dev_info->dev_ops.close = snddev_ecodec_close;
	dev_info->dev_ops.set_freq = snddev_ecodec_set_freq;
	dev_info->dev_ops.enable_sidetone = NULL;
	dev_info->capability = pdata->capability;
	dev_info->opened = 0;

	msm_snddev_register(dev_info);
	ecodec->data = pdata;
	ecodec->sample_rate = 8000; /* Default to 8KHz */
	if (pdata->capability & SNDDEV_CAP_RX) {
	for (i = 0; i < VOC_RX_VOL_ARRAY_NUM; i++) {
	dev_info->max_voc_rx_vol[i] =
	pdata->max_voice_rx_vol[i];
	dev_info->min_voc_rx_vol[i] =
	pdata->min_voice_rx_vol[i];
	}
	}
	error:
	return rc;
	}

	static int snddev_ecodec_remove(struct platform_device *pdev)
	{
	return 0;
	}

	static struct platform_driver snddev_ecodec_driver = {
	.probe = snddev_ecodec_probe,
	.remove = snddev_ecodec_remove,
	.driver = { .name = "msm_snddev_ecodec" }
	};

	static int __init snddev_ecodec_init(void)
	{
	int rc = 0;
	struct snddev_ecodec_drv_state *ecodec_drv = &snddev_ecodec_drv;

	MM_INFO("snddev_ecodec_init\n");
	rc = platform_driver_register(&snddev_ecodec_driver);
	if (IS_ERR_VALUE(rc))
	goto error_platform_driver;
	ecodec_drv->ecodec_clk = clk_get(NULL, "ecodec_clk");
	if (IS_ERR(ecodec_drv->ecodec_clk))
	goto error_ecodec_clk;
	ecodec_drv->lpa_core_clk = clk_get(NULL, "lpa_core_clk");
	if (IS_ERR(ecodec_drv->lpa_core_clk))
	goto error_lpa_core_clk;


	mutex_init(&ecodec_drv->dev_lock);
	ecodec_drv->rx_active = 0;
	ecodec_drv->tx_active = 0;
	return 0;

	error_lpa_core_clk:
	clk_put(ecodec_drv->ecodec_clk);
	error_ecodec_clk:
	platform_driver_unregister(&snddev_ecodec_driver);
	error_platform_driver:

	MM_ERR("encounter error\n");
	return -ENODEV;
	}

	static void __exit snddev_ecodec_exit(void)
	{
	struct snddev_ecodec_drv_state *ecodec_drv = &snddev_ecodec_drv;

	platform_driver_unregister(&snddev_ecodec_driver);
	clk_put(ecodec_drv->ecodec_clk);

	return;
	}

	module_init(snddev_ecodec_init);
	module_exit(snddev_ecodec_exit);

	MODULE_DESCRIPTION("ECodec Sound Device driver");
	MODULE_VERSION("1.0");
	MODULE_LICENSE("GPL v2");