| /* |
| * drivers/char/watchdog/ixp2000_wdt.c |
| * |
| * Watchdog driver for Intel IXP2000 network processors |
| * |
| * Adapted from the IXP4xx watchdog driver by Lennert Buytenhek. |
| * The original version carries these notices: |
| * |
| * Author: Deepak Saxena <dsaxena@plexity.net> |
| * |
| * Copyright 2004 (c) MontaVista, Software, Inc. |
| * Based on sa1100 driver, Copyright (C) 2000 Oleg Drokin <green@crimea.edu> |
| * |
| * This file is licensed under the terms of the GNU General Public |
| * License version 2. This program is licensed "as is" without any |
| * warranty of any kind, whether express or implied. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/types.h> |
| #include <linux/kernel.h> |
| #include <linux/fs.h> |
| #include <linux/miscdevice.h> |
| #include <linux/watchdog.h> |
| #include <linux/init.h> |
| #include <linux/bitops.h> |
| #include <linux/uaccess.h> |
| |
| #include <asm/hardware.h> |
| |
| static int nowayout = WATCHDOG_NOWAYOUT; |
| static unsigned int heartbeat = 60; /* (secs) Default is 1 minute */ |
| static unsigned long wdt_status; |
| static spinlock_t wdt_lock; |
| |
| #define WDT_IN_USE 0 |
| #define WDT_OK_TO_CLOSE 1 |
| |
| static unsigned long wdt_tick_rate; |
| |
| static void wdt_enable(void) |
| { |
| spin_lock(&wdt_lock); |
| ixp2000_reg_write(IXP2000_RESET0, *(IXP2000_RESET0) | WDT_RESET_ENABLE); |
| ixp2000_reg_write(IXP2000_TWDE, WDT_ENABLE); |
| ixp2000_reg_write(IXP2000_T4_CLD, heartbeat * wdt_tick_rate); |
| ixp2000_reg_write(IXP2000_T4_CTL, TIMER_DIVIDER_256 | TIMER_ENABLE); |
| spin_unlock(&wdt_lock); |
| } |
| |
| static void wdt_disable(void) |
| { |
| spin_lock(&wdt_lock); |
| ixp2000_reg_write(IXP2000_T4_CTL, 0); |
| spin_unlock(&wdt_lock); |
| } |
| |
| static void wdt_keepalive(void) |
| { |
| spin_lock(&wdt_lock); |
| ixp2000_reg_write(IXP2000_T4_CLD, heartbeat * wdt_tick_rate); |
| spin_unlock(&wdt_lock); |
| } |
| |
| static int ixp2000_wdt_open(struct inode *inode, struct file *file) |
| { |
| if (test_and_set_bit(WDT_IN_USE, &wdt_status)) |
| return -EBUSY; |
| |
| clear_bit(WDT_OK_TO_CLOSE, &wdt_status); |
| |
| wdt_enable(); |
| |
| return nonseekable_open(inode, file); |
| } |
| |
| static ssize_t ixp2000_wdt_write(struct file *file, const char *data, |
| size_t len, loff_t *ppos) |
| { |
| if (len) { |
| if (!nowayout) { |
| size_t i; |
| |
| clear_bit(WDT_OK_TO_CLOSE, &wdt_status); |
| |
| for (i = 0; i != len; i++) { |
| char c; |
| |
| if (get_user(c, data + i)) |
| return -EFAULT; |
| if (c == 'V') |
| set_bit(WDT_OK_TO_CLOSE, &wdt_status); |
| } |
| } |
| wdt_keepalive(); |
| } |
| |
| return len; |
| } |
| |
| |
| static struct watchdog_info ident = { |
| .options = WDIOF_MAGICCLOSE | WDIOF_SETTIMEOUT | |
| WDIOF_KEEPALIVEPING, |
| .identity = "IXP2000 Watchdog", |
| }; |
| |
| static long ixp2000_wdt_ioctl(struct file *file, unsigned int cmd, |
| unsigned long arg) |
| { |
| int ret = -ENOTTY; |
| int time; |
| |
| switch (cmd) { |
| case WDIOC_GETSUPPORT: |
| ret = copy_to_user((struct watchdog_info *)arg, &ident, |
| sizeof(ident)) ? -EFAULT : 0; |
| break; |
| |
| case WDIOC_GETSTATUS: |
| ret = put_user(0, (int *)arg); |
| break; |
| |
| case WDIOC_GETBOOTSTATUS: |
| ret = put_user(0, (int *)arg); |
| break; |
| |
| case WDIOC_KEEPALIVE: |
| wdt_enable(); |
| ret = 0; |
| break; |
| |
| case WDIOC_SETTIMEOUT: |
| ret = get_user(time, (int *)arg); |
| if (ret) |
| break; |
| |
| if (time <= 0 || time > 60) { |
| ret = -EINVAL; |
| break; |
| } |
| |
| heartbeat = time; |
| wdt_keepalive(); |
| /* Fall through */ |
| |
| case WDIOC_GETTIMEOUT: |
| ret = put_user(heartbeat, (int *)arg); |
| break; |
| } |
| |
| return ret; |
| } |
| |
| static int ixp2000_wdt_release(struct inode *inode, struct file *file) |
| { |
| if (test_bit(WDT_OK_TO_CLOSE, &wdt_status)) |
| wdt_disable(); |
| else |
| printk(KERN_CRIT "WATCHDOG: Device closed unexpectedly - " |
| "timer will not stop\n"); |
| clear_bit(WDT_IN_USE, &wdt_status); |
| clear_bit(WDT_OK_TO_CLOSE, &wdt_status); |
| |
| return 0; |
| } |
| |
| |
| static const struct file_operations ixp2000_wdt_fops = { |
| .owner = THIS_MODULE, |
| .llseek = no_llseek, |
| .write = ixp2000_wdt_write, |
| .unlocked_ioctl = ixp2000_wdt_ioctl, |
| .open = ixp2000_wdt_open, |
| .release = ixp2000_wdt_release, |
| }; |
| |
| static struct miscdevice ixp2000_wdt_miscdev = { |
| .minor = WATCHDOG_MINOR, |
| .name = "watchdog", |
| .fops = &ixp2000_wdt_fops, |
| }; |
| |
| static int __init ixp2000_wdt_init(void) |
| { |
| if ((*IXP2000_PRODUCT_ID & 0x001ffef0) == 0x00000000) { |
| printk(KERN_INFO "Unable to use IXP2000 watchdog due to IXP2800 erratum #25.\n"); |
| return -EIO; |
| } |
| wdt_tick_rate = (*IXP2000_T1_CLD * HZ) / 256; |
| spin_lock_init(&wdt_lock); |
| return misc_register(&ixp2000_wdt_miscdev); |
| } |
| |
| static void __exit ixp2000_wdt_exit(void) |
| { |
| misc_deregister(&ixp2000_wdt_miscdev); |
| } |
| |
| module_init(ixp2000_wdt_init); |
| module_exit(ixp2000_wdt_exit); |
| |
| MODULE_AUTHOR("Deepak Saxena <dsaxena@plexity.net>"); |
| MODULE_DESCRIPTION("IXP2000 Network Processor Watchdog"); |
| |
| module_param(heartbeat, int, 0); |
| MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds (default 60s)"); |
| |
| module_param(nowayout, int, 0); |
| MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started"); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); |
| |