Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (51 commits)
sk98lin: mark deprecated in Kconfig
Hostess SV-11 depends on INET
Fix link autonegotiation timer.
sk98lin: planned removal
B44: increase wait loop
b44: replace define
e1000: allow ethtool to see link status when down
e1000: remove obsolete custom pci_save_state code
e1000: fix shared interrupt warning message
atm: Use ARRAY_SIZE macro when appropriate
bugfixes and new hardware support for arcnet driver
pcnet32 NAPI no longer experimental
MAINTAINER
macb: Remove inappropriate spinlocks around mii calls
Convert meth to netdev_priv
sky2: v1.13
sky2: receive error handling improvements
sky2: transmit timeout
sky2: flow control negotiation for Yukon-FE
sky2: no need to reset pause bits on shutdown
...
diff --git a/Documentation/acpi-hotkey.txt b/Documentation/acpi-hotkey.txt
deleted file mode 100644
index 38040fa..0000000
--- a/Documentation/acpi-hotkey.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-driver/acpi/hotkey.c implement:
-1. /proc/acpi/hotkey/event_config
-(event based hotkey or event config interface):
-a. add a event based hotkey(event) :
-echo "0:bus::action:method:num:num" > event_config
-
-b. delete a event based hotkey(event):
-echo "1:::::num:num" > event_config
-
-c. modify a event based hotkey(event):
-echo "2:bus::action:method:num:num" > event_config
-
-2. /proc/acpi/hotkey/poll_config
-(polling based hotkey or event config interface):
-a.add a polling based hotkey(event) :
-echo "0:bus:method:action:method:num" > poll_config
-this adding command will create a proc file
-/proc/acpi/hotkey/method, which is used to get
-result of polling.
-
-b.delete a polling based hotkey(event):
-echo "1:::::num" > event_config
-
-c.modify a polling based hotkey(event):
-echo "2:bus:method:action:method:num" > poll_config
-
-3./proc/acpi/hotkey/action
-(interface to call aml method associated with a
-specific hotkey(event))
-echo "event_num:event_type:event_argument" >
- /proc/acpi/hotkey/action.
-The result of the execution of this aml method is
-attached to /proc/acpi/hotkey/poll_method, which is dynamically
-created. Please use command "cat /proc/acpi/hotkey/polling_method"
-to retrieve it.
-
-Note: Use cmdline "acpi_generic_hotkey" to over-ride
-platform-specific with generic driver.
diff --git a/Documentation/arm/Samsung-S3C24XX/DMA.txt b/Documentation/arm/Samsung-S3C24XX/DMA.txt
new file mode 100644
index 0000000..37f4edc
--- /dev/null
+++ b/Documentation/arm/Samsung-S3C24XX/DMA.txt
@@ -0,0 +1,46 @@
+ S3C2410 DMA
+ ===========
+
+Introduction
+------------
+
+ The kernel provides an interface to manage DMA transfers
+ using the DMA channels in the cpu, so that the central
+ duty of managing channel mappings, and programming the
+ channel generators is in one place.
+
+
+DMA Channel Ordering
+--------------------
+
+ Many of the range do not have connections for the DMA
+ channels to all sources, which means that some devices
+ have a restricted number of channels that can be used.
+
+ To allow flexibilty for each cpu type and board, the
+ dma code can be given an dma ordering structure which
+ allows the order of channel search to be specified, as
+ well as allowing the prohibition of certain claims.
+
+ struct s3c24xx_dma_order has a list of channels, and
+ each channel within has a slot for a list of dma
+ channel numbers. The slots are searched in order, for
+ the presence of a dma channel number with DMA_CH_VALID
+ orred in.
+
+ If the order has the flag DMA_CH_NEVER set, then after
+ checking the channel list, the system will return no
+ found channel, thus denying the request.
+
+ A board support file can call s3c24xx_dma_order_set()
+ to register an complete ordering set. The routine will
+ copy the data, so the original can be discared with
+ __initdata.
+
+
+Authour
+-------
+
+Ben Dooks,
+Copyright (c) 2007 Ben Dooks, Simtec Electronics
+Licensed under the GPL v2
diff --git a/Documentation/arm/Samsung-S3C24XX/Overview.txt b/Documentation/arm/Samsung-S3C24XX/Overview.txt
index 28d0147..c31b76f 100644
--- a/Documentation/arm/Samsung-S3C24XX/Overview.txt
+++ b/Documentation/arm/Samsung-S3C24XX/Overview.txt
@@ -8,13 +8,10 @@
The Samsung S3C24XX range of ARM9 System-on-Chip CPUs are supported
by the 's3c2410' architecture of ARM Linux. Currently the S3C2410,
- S3C2440 and S3C2442 devices are supported.
+ S3C2412, S3C2413, S3C2440 and S3C2442 devices are supported.
Support for the S3C2400 series is in progress.
- Support for the S3C2412 and S3C2413 CPUs is being merged.
-
-
Configuration
-------------
@@ -26,6 +23,22 @@
please check the machine specific documentation.
+Layout
+------
+
+ The core support files are located in the platform code contained in
+ arch/arm/plat-s3c24xx with headers in include/asm-arm/plat-s3c24xx.
+ This directory should be kept to items shared between the platform
+ code (arch/arm/plat-s3c24xx) and the arch/arm/mach-s3c24* code.
+
+ Each cpu has a directory with the support files for it, and the
+ machines that carry the device. For example S3C2410 is contained
+ in arch/arm/mach-s3c2410 and S3C2440 in arch/arm/mach-s3c2440
+
+ Register, kernel and platform data definitions are held in the
+ include/asm-arm/arch-s3c2410 directory.
+
+
Machines
--------
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index c585aa8..28f897f 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -253,29 +253,6 @@
---------------------------
-<<<<<<< test:Documentation/feature-removal-schedule.txt
-What: ACPI hotkey driver (CONFIG_ACPI_HOTKEY)
-When: 2.6.21
-Why: hotkey.c was an attempt to consolidate multiple drivers that use
- ACPI to implement hotkeys. However, hotkeys are not documented
- in the ACPI specification, so the drivers used undocumented
- vendor-specific hooks and turned out to be more different than
- the same.
-
- Further, the keys and the features supplied by each platform
- are different, so there will always be a need for
- platform-specific drivers.
-
- So the new plan is to delete hotkey.c and instead, work on the
- platform specific drivers to try to make them look the same
- to the user when they supply the same features.
-
- hotkey.c has always depended on CONFIG_EXPERIMENTAL
-
-Who: Len Brown <len.brown@intel.com>
-
----------------------------
-
What: /sys/firmware/acpi/namespace
When: 2.6.21
Why: The ACPI namespace is effectively the symbol list for
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index abd575c..ce1f2c8 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1275,6 +1275,12 @@
This sorting is done to get a device
order compatible with older (<= 2.4) kernels.
nobfsort Don't sort PCI devices into breadth-first order.
+ cbiosize=nn[KMG] The fixed amount of bus space which is
+ reserved for the CardBus bridge's IO window.
+ The default value is 256 bytes.
+ cbmemsize=nn[KMG] The fixed amount of bus space which is
+ reserved for the CardBus bridge's memory
+ window. The default value is 64 megabytes.
pcmv= [HW,PCMCIA] BadgePAD 4
diff --git a/Documentation/pci.txt b/Documentation/pci.txt
index fd5028e..cdf2f3c 100644
--- a/Documentation/pci.txt
+++ b/Documentation/pci.txt
@@ -205,8 +205,8 @@
exclusively called by the probe() routine, can be marked __devinit.
Ditto for remove() and __devexit.
- o If mydriver_probe() is marked with __devinit(), then all address
- references to mydriver_probe must use __devexit_p(mydriver_probe)
+ o If mydriver_remove() is marked with __devexit(), then all address
+ references to mydriver_remove must use __devexit_p(mydriver_remove)
(in the struct pci_driver declaration for example).
__devexit_p() will generate the function name _or_ NULL if the
function will be discarded. For an example, see drivers/net/tg3.c.
diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index 3b51467..b41397d 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -497,7 +497,7 @@
| |- device_type = "cpu"
| |- reg = <0>
| |- clock-frequency = <5f5e1000>
- | |- linux,boot-cpu
+ | |- 64-bit
| |- linux,phandle = <2>
|
o memory@0
@@ -509,7 +509,6 @@
o chosen
|- name = "chosen"
|- bootargs = "root=/dev/sda2"
- |- linux,platform = <00000600>
|- linux,phandle = <4>
This tree is almost a minimal tree. It pretty much contains the
@@ -519,7 +518,7 @@
through /chosen, like in this example, the platform type (mandatory)
and the kernel command line arguments (optional).
-The /cpus/PowerPC,970@0/linux,boot-cpu property is an example of a
+The /cpus/PowerPC,970@0/64-bit property is an example of a
property without a value. All other properties have a value. The
significance of the #address-cells and #size-cells properties will be
explained in chapter IV which defines precisely the required nodes and
@@ -733,8 +732,7 @@
that typically get driven by the same platform code in the
kernel, you would use a different "model" property but put a
value in "compatible". The kernel doesn't directly use that
- value (see /chosen/linux,platform for how the kernel chooses a
- platform type) but it is generally useful.
+ value but it is generally useful.
The root node is also generally where you add additional properties
specific to your board like the serial number if any, that sort of
@@ -778,7 +776,6 @@
bytes
- d-cache-size : one cell, size of L1 data cache in bytes
- i-cache-size : one cell, size of L1 instruction cache in bytes
- - linux, boot-cpu : Should be defined if this cpu is the boot cpu.
Recommended properties:
@@ -843,11 +840,6 @@
the prom_init() trampoline when booting with an OF client interface,
but that you have to provide yourself when using the flattened format.
- Required properties:
-
- - linux,platform : This is your platform number as assigned by the
- architecture maintainers
-
Recommended properties:
- bootargs : This zero-terminated string is passed as the kernel
diff --git a/Documentation/sony-laptop.txt b/Documentation/sony-laptop.txt
new file mode 100644
index 0000000..dfd26df
--- /dev/null
+++ b/Documentation/sony-laptop.txt
@@ -0,0 +1,106 @@
+Sony Notebook Control Driver (SNC) Readme
+-----------------------------------------
+ Copyright (C) 2004- 2005 Stelian Pop <stelian@popies.net>
+ Copyright (C) 2007 Mattia Dongili <malattia@linux.it>
+
+This mini-driver drives the SNC device present in the ACPI BIOS of
+the Sony Vaio laptops.
+
+It gives access to some extra laptop functionalities. In its current
+form, this driver let the user set or query the screen brightness
+through the backlight subsystem and remove/apply power to some devices.
+
+Backlight control:
+------------------
+If your laptop model supports it, you will find sysfs files in the
+/sys/class/backlight/sony/
+directory. You will be able to query and set the current screen
+brightness:
+ brightness get/set screen brightness (an iteger
+ between 0 and 7)
+ actual_brightness reading from this file will query the HW
+ to get real brightness value
+ max_brightness the maximum brightness value
+
+
+Platform specific:
+------------------
+Loading the sony-laptop module will create a
+/sys/devices/platform/sony-laptop/
+directory populated with some files.
+
+You then read/write integer values from/to those files by using
+standard UNIX tools.
+
+The files are:
+ brightness_default screen brightness which will be set
+ when the laptop will be rebooted
+ cdpower power on/off the internal CD drive
+ audiopower power on/off the internal sound card
+ lanpower power on/off the internal ethernet card
+ (only in debug mode)
+
+Note that some files may be missing if they are not supported
+by your particular laptop model.
+
+Example usage:
+ # echo "1" > /sys/devices/platform/sony-laptop/brightness_default
+sets the lowest screen brightness for the next and later reboots,
+ # echo "8" > /sys/devices/platform/sony-laptop/brightness_default
+sets the highest screen brightness for the next and later reboots,
+ # cat /sys/devices/platform/sony-laptop/brightness_default
+retrieves the value.
+
+ # echo "0" > /sys/devices/platform/sony-laptop/audiopower
+powers off the sound card,
+ # echo "1" > /sys/devices/platform/sony-laptop/audiopower
+powers on the sound card.
+
+Development:
+------------
+
+If you want to help with the development of this driver (and
+you are not afraid of any side effects doing strange things with
+your ACPI BIOS could have on your laptop), load the driver and
+pass the option 'debug=1'.
+
+REPEAT: DON'T DO THIS IF YOU DON'T LIKE RISKY BUSINESS.
+
+In your kernel logs you will find the list of all ACPI methods
+the SNC device has on your laptop. You can see the GCDP/GCDP methods
+used to pwer on/off the CD drive, but there are others.
+
+I HAVE NO IDEA WHAT THOSE METHODS DO.
+
+The sony-laptop driver creates, for some of those methods (the most
+current ones found on several Vaio models), an entry under
+/sys/devices/platform/sony-laptop, just like the 'cdpower' one.
+You can create other entries corresponding to your own laptop methods by
+further editing the source (see the 'sony_acpi_values' table, and add a new
+entry to this table with your get/set method names using the
+HANDLE_NAMES macro).
+
+Your mission, should you accept it, is to try finding out what
+those entries are for, by reading/writing random values from/to those
+files and find out what is the impact on your laptop.
+
+Should you find anything interesting, please report it back to me,
+I will not disavow all knowledge of your actions :)
+
+Bugs/Limitations:
+-----------------
+
+* This driver is not based on official documentation from Sony
+ (because there is none), so there is no guarantee this driver
+ will work at all, or do the right thing. Although this hasn't
+ happened to me, this driver could do very bad things to your
+ laptop, including permanent damage.
+
+* The sony-laptop and sonypi drivers do not interact at all. In the
+ future, sonypi could use sony-laptop to do (part of) its business.
+
+* spicctrl, which is the userspace tool used to communicate with the
+ sonypi driver (through /dev/sonypi) does not try to use the
+ sony-laptop driver. In the future, spicctrl could try sonypi first,
+ and if it isn't present, try sony-laptop instead.
+
diff --git a/MAINTAINERS b/MAINTAINERS
index c0f9a1a..270c6b0 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -247,6 +247,13 @@
W: http://acpi.sourceforge.net/
S: Supported
+ACPI VIDEO DRIVER
+P: Luming Yu
+M: luming.yu@intel.com
+L: linux-acpi@vger.kernel.org
+W: http://acpi.sourceforge.net/
+S: Supported
+
AD1816 SOUND DRIVER
P: Thorsten Knabe
M: Thorsten Knabe <linux@thorsten-knabe.de>
@@ -3061,6 +3068,8 @@
SONY VAIO CONTROL DEVICE DRIVER
P: Stelian Pop
M: stelian@popies.net
+P: Mattia Dongili
+M: malattia@linux.it
W: http://popies.net/sonypi/
S: Maintained
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 5c79519..8bf97e0 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -245,6 +245,8 @@
config ARCH_IOP13XX
bool "IOP13xx-based"
+ depends on MMU
+ select PLAT_IOP
select PCI
help
Support for Intel's IOP13XX (XScale) family of processors.
@@ -283,6 +285,14 @@
If you have any questions or comments about the Linux kernel port
to this board, send e-mail to <sjhill@cotw.com>.
+config ARCH_NS9XXX
+ bool "NetSilicon NS9xxx"
+ help
+ Say Y here if you intend to run this kernel on a NetSilicon NS9xxx
+ System.
+
+ <http://www.digi.com/products/microprocessors/index.jsp>
+
config ARCH_PNX4008
bool "Philips Nexperia PNX4008 Mobile"
help
@@ -292,6 +302,7 @@
bool "PXA2xx-based"
depends on MMU
select ARCH_MTD_XIP
+ select GENERIC_TIME
help
Support for Intel's PXA2XX processor line.
@@ -316,7 +327,7 @@
Support for StrongARM 11x0 based boards.
config ARCH_S3C2410
- bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442"
+ bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442, S3C2443"
help
Samsung S3C2410X CPU based systems, such as the Simtec Electronics
BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
@@ -376,7 +387,16 @@
source "arch/arm/mach-omap2/Kconfig"
+source "arch/arm/plat-s3c24xx/Kconfig"
+
+if ARCH_S3C2410
+source "arch/arm/mach-s3c2400/Kconfig"
source "arch/arm/mach-s3c2410/Kconfig"
+source "arch/arm/mach-s3c2412/Kconfig"
+source "arch/arm/mach-s3c2440/Kconfig"
+source "arch/arm/mach-s3c2442/Kconfig"
+source "arch/arm/mach-s3c2443/Kconfig"
+endif
source "arch/arm/mach-lh7a40x/Kconfig"
@@ -390,10 +410,12 @@
source "arch/arm/mach-realview/Kconfig"
-source "arch/arm/mach-at91rm9200/Kconfig"
+source "arch/arm/mach-at91/Kconfig"
source "arch/arm/mach-netx/Kconfig"
+source "arch/arm/mach-ns9xxx/Kconfig"
+
# Definitions to make life easier
config ARCH_ACORN
bool
@@ -751,6 +773,20 @@
be linked for and stored to. This address is dependent on your
own flash usage.
+config KEXEC
+ bool "Kexec system call (EXPERIMENTAL)"
+ depends on EXPERIMENTAL
+ help
+ kexec is a system call that implements the ability to shutdown your
+ current kernel, and to start another kernel. It is like a reboot
+ but it is indepedent of the system firmware. And like a reboot
+ you can start any kernel with it, not just Linux.
+
+ It is an ongoing process to be certain the hardware in a machine
+ is properly shutdown, so do not be surprised if this code does not
+ initially work for you. It may help to enable device hotplugging
+ support.
+
endmenu
if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_IMX )
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 000f110..1320418 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -124,10 +124,12 @@
machine-$(CONFIG_ARCH_H720X) := h720x
machine-$(CONFIG_ARCH_AAEC2000) := aaec2000
machine-$(CONFIG_ARCH_REALVIEW) := realview
- machine-$(CONFIG_ARCH_AT91) := at91rm9200
- machine-$(CONFIG_ARCH_EP93XX) := ep93xx
- machine-$(CONFIG_ARCH_PNX4008) := pnx4008
- machine-$(CONFIG_ARCH_NETX) := netx
+ machine-$(CONFIG_ARCH_AT91) := at91rm9200
+ machine-$(CONFIG_ARCH_EP93XX) := ep93xx
+ machine-$(CONFIG_ARCH_PNX4008) := pnx4008
+ machine-$(CONFIG_ARCH_NETX) := netx
+ machine-$(CONFIG_ARCH_NS9XXX) := ns9xxx
+ textofs-$(CONFIG_ARCH_NS9XXX) := 0x00108000
ifeq ($(CONFIG_ARCH_EBSA110),y)
# This is what happens if you forget the IOCS16 line.
@@ -149,7 +151,7 @@
else
MACHINE :=
endif
-
+
export TEXT_OFFSET GZFLAGS MMUEXT
# Do we have FASTFPE?
@@ -161,6 +163,11 @@
# If we have a machine-specific directory, then include it in the build.
core-y += arch/arm/kernel/ arch/arm/mm/ arch/arm/common/
core-y += $(MACHINE)
+core-$(CONFIG_ARCH_S3C2410) += arch/arm/mach-s3c2400/
+core-$(CONFIG_ARCH_S3C2410) += arch/arm/mach-s3c2412/
+core-$(CONFIG_ARCH_S3C2410) += arch/arm/mach-s3c2440/
+core-$(CONFIG_ARCH_S3C2410) += arch/arm/mach-s3c2442/
+core-$(CONFIG_ARCH_S3C2410) += arch/arm/mach-s3c2443/
core-$(CONFIG_FPE_NWFPE) += arch/arm/nwfpe/
core-$(CONFIG_FPE_FASTFPE) += $(FASTFPE_OBJ)
core-$(CONFIG_VFP) += arch/arm/vfp/
@@ -168,6 +175,7 @@
# If we have a common platform directory, then include it in the build.
core-$(CONFIG_PLAT_IOP) += arch/arm/plat-iop/
core-$(CONFIG_ARCH_OMAP) += arch/arm/plat-omap/
+core-$(CONFIG_PLAT_S3C24XX) += arch/arm/plat-s3c24xx/
drivers-$(CONFIG_OPROFILE) += arch/arm/oprofile/
drivers-$(CONFIG_ARCH_CLPS7500) += drivers/acorn/char/
diff --git a/arch/arm/boot/.gitignore b/arch/arm/boot/.gitignore
new file mode 100644
index 0000000..171a085
--- /dev/null
+++ b/arch/arm/boot/.gitignore
@@ -0,0 +1,2 @@
+Image
+zImage
diff --git a/arch/arm/boot/compressed/.gitignore b/arch/arm/boot/compressed/.gitignore
new file mode 100644
index 0000000..aefee20
--- /dev/null
+++ b/arch/arm/boot/compressed/.gitignore
@@ -0,0 +1 @@
+piggy.gz
diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c
index 2e635b8..6fbe772 100644
--- a/arch/arm/common/dmabounce.c
+++ b/arch/arm/common/dmabounce.c
@@ -32,7 +32,6 @@
#include <asm/cacheflush.h>
-#undef DEBUG
#undef STATS
#ifdef STATS
@@ -66,14 +65,13 @@
};
struct dmabounce_device_info {
- struct list_head node;
-
struct device *dev;
struct list_head safe_buffers;
#ifdef STATS
unsigned long total_allocs;
unsigned long map_op_count;
unsigned long bounce_count;
+ int attr_res;
#endif
struct dmabounce_pool small;
struct dmabounce_pool large;
@@ -81,34 +79,24 @@
rwlock_t lock;
};
-static LIST_HEAD(dmabounce_devs);
-
#ifdef STATS
-static void print_alloc_stats(struct dmabounce_device_info *device_info)
+static ssize_t dmabounce_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
{
- printk(KERN_INFO
- "%s: dmabounce: sbp: %lu, lbp: %lu, other: %lu, total: %lu\n",
- device_info->dev->bus_id,
- device_info->small.allocs, device_info->large.allocs,
+ struct dmabounce_device_info *device_info = dev->archdata.dmabounce;
+ return sprintf(buf, "%lu %lu %lu %lu %lu %lu\n",
+ device_info->small.allocs,
+ device_info->large.allocs,
device_info->total_allocs - device_info->small.allocs -
device_info->large.allocs,
- device_info->total_allocs);
+ device_info->total_allocs,
+ device_info->map_op_count,
+ device_info->bounce_count);
}
+
+static DEVICE_ATTR(dmabounce_stats, 0400, dmabounce_show, NULL);
#endif
-/* find the given device in the dmabounce device list */
-static inline struct dmabounce_device_info *
-find_dmabounce_dev(struct device *dev)
-{
- struct dmabounce_device_info *d;
-
- list_for_each_entry(d, &dmabounce_devs, node)
- if (d->dev == dev)
- return d;
-
- return NULL;
-}
-
/* allocate a 'safe' buffer and keep track of it */
static inline struct safe_buffer *
@@ -162,8 +150,6 @@
if (pool)
pool->allocs++;
device_info->total_allocs++;
- if (device_info->total_allocs % 1000 == 0)
- print_alloc_stats(device_info);
#endif
write_lock_irqsave(&device_info->lock, flags);
@@ -218,20 +204,11 @@
/* ************************************************** */
-#ifdef STATS
-static void print_map_stats(struct dmabounce_device_info *device_info)
-{
- dev_info(device_info->dev,
- "dmabounce: map_op_count=%lu, bounce_count=%lu\n",
- device_info->map_op_count, device_info->bounce_count);
-}
-#endif
-
static inline dma_addr_t
map_single(struct device *dev, void *ptr, size_t size,
enum dma_data_direction dir)
{
- struct dmabounce_device_info *device_info = find_dmabounce_dev(dev);
+ struct dmabounce_device_info *device_info = dev->archdata.dmabounce;
dma_addr_t dma_addr;
int needs_bounce = 0;
@@ -281,10 +258,14 @@
ptr = buf->safe;
dma_addr = buf->safe_dma_addr;
+ } else {
+ /*
+ * We don't need to sync the DMA buffer since
+ * it was allocated via the coherent allocators.
+ */
+ consistent_sync(ptr, size, dir);
}
- consistent_sync(ptr, size, dir);
-
return dma_addr;
}
@@ -292,7 +273,7 @@
unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
enum dma_data_direction dir)
{
- struct dmabounce_device_info *device_info = find_dmabounce_dev(dev);
+ struct dmabounce_device_info *device_info = dev->archdata.dmabounce;
struct safe_buffer *buf = NULL;
/*
@@ -317,12 +298,12 @@
DO_STATS ( device_info->bounce_count++ );
if (dir == DMA_FROM_DEVICE || dir == DMA_BIDIRECTIONAL) {
- unsigned long ptr;
+ void *ptr = buf->ptr;
dev_dbg(dev,
"%s: copy back safe %p to unsafe %p size %d\n",
- __func__, buf->safe, buf->ptr, size);
- memcpy(buf->ptr, buf->safe, size);
+ __func__, buf->safe, ptr, size);
+ memcpy(ptr, buf->safe, size);
/*
* DMA buffers must have the same cache properties
@@ -332,8 +313,8 @@
* bidirectional case because we know the cache
* lines will be coherent with the data written.
*/
- ptr = (unsigned long)buf->ptr;
dmac_clean_range(ptr, ptr + size);
+ outer_clean_range(__pa(ptr), __pa(ptr) + size);
}
free_safe_buffer(device_info, buf);
}
@@ -343,7 +324,7 @@
sync_single(struct device *dev, dma_addr_t dma_addr, size_t size,
enum dma_data_direction dir)
{
- struct dmabounce_device_info *device_info = find_dmabounce_dev(dev);
+ struct dmabounce_device_info *device_info = dev->archdata.dmabounce;
struct safe_buffer *buf = NULL;
if (device_info)
@@ -397,7 +378,10 @@
default:
BUG();
}
- consistent_sync(buf->safe, size, dir);
+ /*
+ * No need to sync the safe buffer - it was allocated
+ * via the coherent allocators.
+ */
} else {
consistent_sync(dma_to_virt(dev, dma_addr), size, dir);
}
@@ -604,9 +588,10 @@
device_info->total_allocs = 0;
device_info->map_op_count = 0;
device_info->bounce_count = 0;
+ device_info->attr_res = device_create_file(dev, &dev_attr_dmabounce_stats);
#endif
- list_add(&device_info->node, &dmabounce_devs);
+ dev->archdata.dmabounce = device_info;
printk(KERN_INFO "dmabounce: registered device %s on %s bus\n",
dev->bus_id, dev->bus->name);
@@ -623,7 +608,9 @@
void
dmabounce_unregister_dev(struct device *dev)
{
- struct dmabounce_device_info *device_info = find_dmabounce_dev(dev);
+ struct dmabounce_device_info *device_info = dev->archdata.dmabounce;
+
+ dev->archdata.dmabounce = NULL;
if (!device_info) {
printk(KERN_WARNING
@@ -645,12 +632,10 @@
dma_pool_destroy(device_info->large.pool);
#ifdef STATS
- print_alloc_stats(device_info);
- print_map_stats(device_info);
+ if (device_info->attr_res == 0)
+ device_remove_file(dev, &dev_attr_dmabounce_stats);
#endif
- list_del(&device_info->node);
-
kfree(device_info);
printk(KERN_INFO "dmabounce: device %s on %s bus unregistered\n",
diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c
index 09b9d1b..4deece5 100644
--- a/arch/arm/common/gic.c
+++ b/arch/arm/common/gic.c
@@ -14,7 +14,9 @@
*
* o There is one CPU Interface per CPU, which sends interrupts sent
* by the Distributor, and interrupts generated locally, to the
- * associated CPU.
+ * associated CPU. The base address of the CPU interface is usually
+ * aliased so that the same address points to different chips depending
+ * on the CPU it is accessed from.
*
* Note that IRQs 0-31 are special - they are local to each CPU.
* As such, the enable set/clear, pending set/clear and active bit
@@ -31,10 +33,38 @@
#include <asm/mach/irq.h>
#include <asm/hardware/gic.h>
-static void __iomem *gic_dist_base;
-static void __iomem *gic_cpu_base;
static DEFINE_SPINLOCK(irq_controller_lock);
+struct gic_chip_data {
+ unsigned int irq_offset;
+ void __iomem *dist_base;
+ void __iomem *cpu_base;
+};
+
+#ifndef MAX_GIC_NR
+#define MAX_GIC_NR 1
+#endif
+
+static struct gic_chip_data gic_data[MAX_GIC_NR];
+
+static inline void __iomem *gic_dist_base(unsigned int irq)
+{
+ struct gic_chip_data *gic_data = get_irq_chip_data(irq);
+ return gic_data->dist_base;
+}
+
+static inline void __iomem *gic_cpu_base(unsigned int irq)
+{
+ struct gic_chip_data *gic_data = get_irq_chip_data(irq);
+ return gic_data->cpu_base;
+}
+
+static inline unsigned int gic_irq(unsigned int irq)
+{
+ struct gic_chip_data *gic_data = get_irq_chip_data(irq);
+ return irq - gic_data->irq_offset;
+}
+
/*
* Routines to acknowledge, disable and enable interrupts
*
@@ -55,8 +85,8 @@
u32 mask = 1 << (irq % 32);
spin_lock(&irq_controller_lock);
- writel(mask, gic_dist_base + GIC_DIST_ENABLE_CLEAR + (irq / 32) * 4);
- writel(irq, gic_cpu_base + GIC_CPU_EOI);
+ writel(mask, gic_dist_base(irq) + GIC_DIST_ENABLE_CLEAR + (gic_irq(irq) / 32) * 4);
+ writel(gic_irq(irq), gic_cpu_base(irq) + GIC_CPU_EOI);
spin_unlock(&irq_controller_lock);
}
@@ -65,7 +95,7 @@
u32 mask = 1 << (irq % 32);
spin_lock(&irq_controller_lock);
- writel(mask, gic_dist_base + GIC_DIST_ENABLE_CLEAR + (irq / 32) * 4);
+ writel(mask, gic_dist_base(irq) + GIC_DIST_ENABLE_CLEAR + (gic_irq(irq) / 32) * 4);
spin_unlock(&irq_controller_lock);
}
@@ -74,14 +104,14 @@
u32 mask = 1 << (irq % 32);
spin_lock(&irq_controller_lock);
- writel(mask, gic_dist_base + GIC_DIST_ENABLE_SET + (irq / 32) * 4);
+ writel(mask, gic_dist_base(irq) + GIC_DIST_ENABLE_SET + (gic_irq(irq) / 32) * 4);
spin_unlock(&irq_controller_lock);
}
#ifdef CONFIG_SMP
static void gic_set_cpu(unsigned int irq, cpumask_t mask_val)
{
- void __iomem *reg = gic_dist_base + GIC_DIST_TARGET + (irq & ~3);
+ void __iomem *reg = gic_dist_base(irq) + GIC_DIST_TARGET + (gic_irq(irq) & ~3);
unsigned int shift = (irq % 4) * 8;
unsigned int cpu = first_cpu(mask_val);
u32 val;
@@ -95,6 +125,37 @@
}
#endif
+static void fastcall gic_handle_cascade_irq(unsigned int irq,
+ struct irq_desc *desc)
+{
+ struct gic_chip_data *chip_data = get_irq_data(irq);
+ struct irq_chip *chip = get_irq_chip(irq);
+ unsigned int cascade_irq;
+ unsigned long status;
+
+ /* primary controller ack'ing */
+ chip->ack(irq);
+
+ spin_lock(&irq_controller_lock);
+ status = readl(chip_data->cpu_base + GIC_CPU_INTACK);
+ spin_unlock(&irq_controller_lock);
+
+ cascade_irq = (status & 0x3ff);
+ if (cascade_irq > 1020)
+ goto out;
+ if (cascade_irq < 32 || cascade_irq >= NR_IRQS) {
+ do_bad_IRQ(cascade_irq, desc);
+ goto out;
+ }
+
+ cascade_irq += chip_data->irq_offset;
+ generic_handle_irq(cascade_irq);
+
+ out:
+ /* primary controller unmasking */
+ chip->unmask(irq);
+}
+
static struct irq_chip gic_chip = {
.name = "GIC",
.ack = gic_ack_irq,
@@ -105,15 +166,29 @@
#endif
};
-void __init gic_dist_init(void __iomem *base)
+void __init gic_cascade_irq(unsigned int gic_nr, unsigned int irq)
+{
+ if (gic_nr >= MAX_GIC_NR)
+ BUG();
+ if (set_irq_data(irq, &gic_data[gic_nr]) != 0)
+ BUG();
+ set_irq_chained_handler(irq, gic_handle_cascade_irq);
+}
+
+void __init gic_dist_init(unsigned int gic_nr, void __iomem *base,
+ unsigned int irq_start)
{
unsigned int max_irq, i;
u32 cpumask = 1 << smp_processor_id();
+ if (gic_nr >= MAX_GIC_NR)
+ BUG();
+
cpumask |= cpumask << 8;
cpumask |= cpumask << 16;
- gic_dist_base = base;
+ gic_data[gic_nr].dist_base = base;
+ gic_data[gic_nr].irq_offset = (irq_start - 1) & ~31;
writel(0, base + GIC_DIST_CTRL);
@@ -158,8 +233,9 @@
/*
* Setup the Linux IRQ subsystem.
*/
- for (i = 29; i < max_irq; i++) {
+ for (i = irq_start; i < gic_data[gic_nr].irq_offset + max_irq; i++) {
set_irq_chip(i, &gic_chip);
+ set_irq_chip_data(i, &gic_data[gic_nr]);
set_irq_handler(i, handle_level_irq);
set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
}
@@ -167,9 +243,13 @@
writel(1, base + GIC_DIST_CTRL);
}
-void __cpuinit gic_cpu_init(void __iomem *base)
+void __cpuinit gic_cpu_init(unsigned int gic_nr, void __iomem *base)
{
- gic_cpu_base = base;
+ if (gic_nr >= MAX_GIC_NR)
+ BUG();
+
+ gic_data[gic_nr].cpu_base = base;
+
writel(0xf0, base + GIC_CPU_PRIMASK);
writel(1, base + GIC_CPU_CTRL);
}
@@ -179,6 +259,7 @@
{
unsigned long map = *cpus_addr(cpumask);
- writel(map << 16 | irq, gic_dist_base + GIC_DIST_SOFTINT);
+ /* this always happens on GIC0 */
+ writel(map << 16 | irq, gic_data[0].dist_base + GIC_DIST_SOFTINT);
}
#endif
diff --git a/arch/arm/configs/at91sam9263ek_defconfig b/arch/arm/configs/at91sam9263ek_defconfig
new file mode 100644
index 0000000..c72ab82
--- /dev/null
+++ b/arch/arm/configs/at91sam9263ek_defconfig
@@ -0,0 +1,1184 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.20-rc1
+# Mon Jan 8 16:06:54 2007
+#
+CONFIG_ARM=y
+# CONFIG_GENERIC_TIME is not set
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Atmel AT91 System-on-Chip
+#
+# CONFIG_ARCH_AT91RM9200 is not set
+# CONFIG_ARCH_AT91SAM9260 is not set
+# CONFIG_ARCH_AT91SAM9261 is not set
+CONFIG_ARCH_AT91SAM9263=y
+
+#
+# AT91SAM9263 Board Type
+#
+CONFIG_MACH_AT91SAM9263EK=y
+
+#
+# AT91 Board Options
+#
+CONFIG_MTD_AT91_DATAFLASH_CARD=y
+# CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set
+
+#
+# AT91 Feature Selections
+#
+# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+
+#
+# Bus support
+#
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_PREEMPT is not set
+# CONFIG_NO_IDLE_HZ is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
+# CONFIG_XIP_KERNEL is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+# CONFIG_APM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_DATAFLASH=y
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_AT91=y
+# CONFIG_MTD_NAND_NANDSIM is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_TSDEV=y
+CONFIG_INPUT_TSDEV_SCREEN_X=240
+CONFIG_INPUT_TSDEV_SCREEN_Y=320
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+CONFIG_I2C_AT91=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_ATMEL=y
+# CONFIG_SPI_BITBANG is not set
+
+#
+# SPI Protocol Masters
+#
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# Misc devices
+#
+# CONFIG_TIFM_CORE is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FIRMWARE_EDID is not set
+CONFIG_FB=y
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+
+#
+# Logo configuration
+#
+# CONFIG_LOGO is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# HID Devices
+#
+CONFIG_HID=y
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_MULTITHREAD_PROBE is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_TOUCHSCREEN is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
+# CONFIG_USB_USBNET is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+CONFIG_USB_GADGET_AT91=y
+CONFIG_USB_AT91=y
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+CONFIG_USB_ZERO=m
+# CONFIG_USB_ETH is not set
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_AT91=m
+# CONFIG_MMC_TIFM_SD is not set
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RWSEMS is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_DEBUG_USER=y
+# CONFIG_DEBUG_ERRORS is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
diff --git a/arch/arm/configs/ateb9200_defconfig b/arch/arm/configs/ateb9200_defconfig
index 3de5c64..baa9769 100644
--- a/arch/arm/configs/ateb9200_defconfig
+++ b/arch/arm/configs/ateb9200_defconfig
@@ -1066,7 +1066,7 @@
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_M48T86 is not set
-CONFIG_RTC_DRV_AT91=y
+CONFIG_RTC_DRV_AT91RM9200=y
# CONFIG_RTC_DRV_TEST is not set
#
diff --git a/arch/arm/configs/csb337_defconfig b/arch/arm/configs/csb337_defconfig
index 2cadd51..88e5d28 100644
--- a/arch/arm/configs/csb337_defconfig
+++ b/arch/arm/configs/csb337_defconfig
@@ -355,10 +355,12 @@
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0
+CONFIG_MTD_PHYSMAP_LEN=0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=0
# CONFIG_MTD_ARM_INTEGRATOR is not set
# CONFIG_MTD_PLATRAM is not set
-CONFIG_MTD_CSB337=y
#
# Self-contained MTD device drivers
@@ -986,7 +988,7 @@
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_M48T86 is not set
-CONFIG_RTC_DRV_AT91=y
+CONFIG_RTC_DRV_AT91RM9200=y
# CONFIG_RTC_DRV_TEST is not set
# CONFIG_RTC_DRV_V3020 is not set
diff --git a/arch/arm/configs/csb637_defconfig b/arch/arm/configs/csb637_defconfig
index 94908c1..669f035 100644
--- a/arch/arm/configs/csb637_defconfig
+++ b/arch/arm/configs/csb637_defconfig
@@ -355,10 +355,12 @@
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0
+CONFIG_MTD_PHYSMAP_LEN=0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=0
# CONFIG_MTD_ARM_INTEGRATOR is not set
# CONFIG_MTD_PLATRAM is not set
-CONFIG_MTD_CSB637=y
#
# Self-contained MTD device drivers
diff --git a/arch/arm/configs/kafa_defconfig b/arch/arm/configs/kafa_defconfig
index a4cdafc..a0f48d5 100644
--- a/arch/arm/configs/kafa_defconfig
+++ b/arch/arm/configs/kafa_defconfig
@@ -718,7 +718,7 @@
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_M48T86 is not set
-CONFIG_RTC_DRV_AT91=y
+CONFIG_RTC_DRV_AT91RM9200=y
# CONFIG_RTC_DRV_TEST is not set
#
diff --git a/arch/arm/configs/ns9xxx_defconfig b/arch/arm/configs/ns9xxx_defconfig
new file mode 100644
index 0000000..0e5794c
--- /dev/null
+++ b/arch/arm/configs/ns9xxx_defconfig
@@ -0,0 +1,621 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.20
+# Thu Feb 15 20:51:47 2007
+#
+CONFIG_ARM=y
+# CONFIG_GENERIC_TIME is not set
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_UTS_NS is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_L7200 is not set
+CONFIG_ARCH_NS9XXX=y
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# NS9xxx Implementations
+#
+CONFIG_MACH_CC9P9360DEV=y
+CONFIG_PROCESSOR_NS9360=y
+CONFIG_BOARD_A9M9750DEV=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+
+#
+# Bus support
+#
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_PREEMPT is not set
+# CONFIG_NO_IDLE_HZ is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+# CONFIG_APM is not set
+
+#
+# Networking
+#
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# ISDN subsystem
+#
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_SERPORT is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+# CONFIG_SERIAL_8250_MANY_PORTS is not set
+# CONFIG_SERIAL_8250_SHARE_IRQ is not set
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# Misc devices
+#
+# CONFIG_TIFM_CORE is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+
+#
+# Graphics support
+#
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# HID Devices
+#
+CONFIG_HID=y
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RWSEMS is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+CONFIG_DEBUG_LL=y
+CONFIG_DEBUG_ICEDCC=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC32 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig
index 3b31a33..df19e36 100644
--- a/arch/arm/configs/s3c2410_defconfig
+++ b/arch/arm/configs/s3c2410_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.19-rc4
-# Fri Nov 3 17:41:31 2006
+# Linux kernel version: 2.6.20
+# Thu Feb 15 11:26:24 2007
#
CONFIG_ARM=y
# CONFIG_GENERIC_TIME is not set
@@ -11,6 +11,8 @@
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_VECTORS_BASE=0xffff0000
@@ -37,13 +39,14 @@
# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
-# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -76,7 +79,9 @@
# Block layer
#
CONFIG_BLOCK=y
+# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
#
# IO Schedulers
@@ -110,6 +115,7 @@
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP23XX is not set
@@ -122,54 +128,73 @@
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_OMAP is not set
+CONFIG_PLAT_S3C24XX=y
+CONFIG_CPU_S3C244X=y
+CONFIG_PM_SIMTEC=y
+# CONFIG_S3C2410_BOOT_WATCHDOG is not set
+# CONFIG_S3C2410_BOOT_ERROR_RESET is not set
+# CONFIG_S3C2410_PM_DEBUG is not set
+# CONFIG_S3C2410_PM_CHECK is not set
+CONFIG_S3C2410_LOWLEVEL_UART_PORT=0
+CONFIG_S3C2410_DMA=y
+# CONFIG_S3C2410_DMA_DEBUG is not set
+CONFIG_MACH_SMDK=y
#
-# S3C24XX Implementations
+# S3C2400 Machines
#
-# CONFIG_MACH_AML_M5900 is not set
+CONFIG_CPU_S3C2410=y
+CONFIG_CPU_S3C2410_DMA=y
+CONFIG_S3C2410_PM=y
+CONFIG_S3C2410_GPIO=y
+CONFIG_S3C2410_CLOCK=y
+
+#
+# S3C2410 Machines
+#
+CONFIG_ARCH_SMDK2410=y
+CONFIG_ARCH_H1940=y
+CONFIG_PM_H1940=y
+CONFIG_MACH_N30=y
+CONFIG_ARCH_BAST=y
+CONFIG_MACH_OTOM=y
+CONFIG_MACH_AML_M5900=y
+CONFIG_BAST_PC104_IRQ=y
+CONFIG_MACH_VR1000=y
+CONFIG_CPU_S3C2412=y
+CONFIG_S3C2412_DMA=y
+CONFIG_S3C2412_PM=y
+
+#
+# S3C2412 Machines
+#
+CONFIG_MACH_SMDK2413=y
+CONFIG_MACH_S3C2413=y
+CONFIG_MACH_VSTMS=y
+CONFIG_CPU_S3C2440=y
+CONFIG_S3C2440_DMA=y
+
+#
+# S3C2440 Machines
+#
CONFIG_MACH_ANUBIS=y
CONFIG_MACH_OSIRIS=y
-CONFIG_ARCH_BAST=y
-CONFIG_BAST_PC104_IRQ=y
-CONFIG_ARCH_H1940=y
-CONFIG_MACH_N30=y
-CONFIG_MACH_SMDK=y
-CONFIG_ARCH_SMDK2410=y
-CONFIG_ARCH_S3C2440=y
-CONFIG_SMDK2440_CPU2440=y
-CONFIG_SMDK2440_CPU2442=y
-CONFIG_MACH_S3C2413=y
-CONFIG_MACH_SMDK2413=y
-CONFIG_MACH_VR1000=y
CONFIG_MACH_RX3715=y
-CONFIG_MACH_OTOM=y
+CONFIG_ARCH_S3C2440=y
CONFIG_MACH_NEXCODER_2440=y
-CONFIG_MACH_VSTMS=y
-CONFIG_S3C2410_CLOCK=y
-CONFIG_S3C2410_PM=y
-CONFIG_CPU_S3C2410_DMA=y
-CONFIG_CPU_S3C2410=y
-CONFIG_S3C2412_PM=y
-CONFIG_CPU_S3C2412=y
-CONFIG_CPU_S3C244X=y
-CONFIG_CPU_S3C2440=y
+CONFIG_SMDK2440_CPU2440=y
CONFIG_CPU_S3C2442=y
#
-# S3C2410 Boot
+# S3C2442 Machines
#
-# CONFIG_S3C2410_BOOT_WATCHDOG is not set
-# CONFIG_S3C2410_BOOT_ERROR_RESET is not set
+CONFIG_SMDK2440_CPU2442=y
+CONFIG_CPU_S3C2443=y
#
-# S3C2410 Setup
+# S3C2443 Machines
#
-CONFIG_S3C2410_DMA=y
-# CONFIG_S3C2410_DMA_DEBUG is not set
-# CONFIG_S3C2410_PM_DEBUG is not set
-# CONFIG_S3C2410_PM_CHECK is not set
-CONFIG_PM_SIMTEC=y
-CONFIG_S3C2410_LOWLEVEL_UART_PORT=0
+CONFIG_MACH_SMDK2443=y
#
# Processor Type
@@ -196,6 +221,7 @@
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
#
# Bus support
@@ -303,6 +329,7 @@
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
@@ -385,6 +412,7 @@
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
@@ -531,6 +559,11 @@
# CONFIG_SCSI_NETLINK is not set
#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
+
+#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
@@ -682,7 +715,7 @@
# CONFIG_DIGIEPCA is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
-# CONFIG_ISI is not set
+# CONFIG_MOXA_SMARTIO_NEW is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_N_HDLC is not set
# CONFIG_RISCOM8 is not set
@@ -700,13 +733,14 @@
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_RSA is not set
# CONFIG_SERIAL_8250_FOURPORT is not set
# CONFIG_SERIAL_8250_ACCENT is not set
# CONFIG_SERIAL_8250_BOCA is not set
+# CONFIG_SERIAL_8250_EXAR_ST16C554 is not set
# CONFIG_SERIAL_8250_HUB6 is not set
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
#
# Non-8250 serial port support
@@ -755,10 +789,6 @@
# CONFIG_NVRAM is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
# CONFIG_RAW_DRIVER is not set
#
@@ -863,6 +893,7 @@
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
@@ -870,6 +901,7 @@
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
@@ -952,6 +984,11 @@
# CONFIG_SOUND is not set
#
+# HID Devices
+#
+CONFIG_HID=y
+
+#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
@@ -1028,6 +1065,7 @@
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
CONFIG_USB_MON=y
@@ -1179,9 +1217,6 @@
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
-CONFIG_JFFS_FS=y
-CONFIG_JFFS_FS_VERBOSE=0
-# CONFIG_JFFS_PROC_FS is not set
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
@@ -1191,7 +1226,7 @@
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
+CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
@@ -1285,6 +1320,11 @@
# CONFIG_NLS_UTF8 is not set
#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
# Profiling support
#
# CONFIG_PROFILING is not set
@@ -1296,6 +1336,8 @@
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_DETECT_SOFTLOCKUP=y
@@ -1311,12 +1353,10 @@
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
CONFIG_FRAME_POINTER=y
CONFIG_FORCED_INLINING=y
-# CONFIG_HEADERS_CHECK is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_USER=y
# CONFIG_DEBUG_ERRORS is not set
@@ -1339,6 +1379,7 @@
#
# Library routines
#
+CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
@@ -1346,3 +1387,4 @@
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index 1b935fb..bb28087 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -18,6 +18,7 @@
obj-$(CONFIG_ISA_DMA) += dma-isa.o
obj-$(CONFIG_PCI) += bios32.o isa.o
obj-$(CONFIG_SMP) += smp.o
+obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o
obj-$(CONFIG_OABI_COMPAT) += sys_oabi-compat.o
obj-$(CONFIG_CRUNCH) += crunch.o crunch-bits.o
diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S
index f7598cb..ae89cdd 100644
--- a/arch/arm/kernel/calls.S
+++ b/arch/arm/kernel/calls.S
@@ -356,6 +356,7 @@
CALL(sys_move_pages)
/* 345 */ CALL(sys_getcpu)
CALL(sys_ni_syscall) /* eventually epoll_pwait */
+ CALL(sys_kexec_load)
#ifndef syscalls_counted
.equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls
#define syscalls_counted
diff --git a/arch/arm/kernel/crunch.c b/arch/arm/kernel/crunch.c
index cec8378..627d794 100644
--- a/arch/arm/kernel/crunch.c
+++ b/arch/arm/kernel/crunch.c
@@ -75,6 +75,7 @@
static int __init crunch_init(void)
{
thread_register_notifier(&crunch_notifier_block);
+ elf_hwcap |= HWCAP_CRUNCH;
return 0;
}
diff --git a/arch/arm/kernel/ecard.c b/arch/arm/kernel/ecard.c
index 71257e3..f1c0fb9 100644
--- a/arch/arm/kernel/ecard.c
+++ b/arch/arm/kernel/ecard.c
@@ -1009,7 +1009,7 @@
ec->fiqmask = 4;
}
- for (i = 0; i < sizeof(blacklist) / sizeof(*blacklist); i++)
+ for (i = 0; i < ARRAY_SIZE(blacklist); i++)
if (blacklist[i].manufacturer == ec->cid.manufacturer &&
blacklist[i].product == ec->cid.product) {
ec->card_desc = blacklist[i].type;
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 8517c3c..cc10a09 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -99,7 +99,6 @@
@ cpsr_<exception>, "old_r0"
mov r0, sp
- and r2, r6, #0x1f
b bad_mode
/*
diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c
new file mode 100644
index 0000000..863c664
--- /dev/null
+++ b/arch/arm/kernel/machine_kexec.c
@@ -0,0 +1,78 @@
+/*
+ * machine_kexec.c - handle transition of Linux booting another kernel
+ */
+
+#include <linux/mm.h>
+#include <linux/kexec.h>
+#include <linux/delay.h>
+#include <linux/reboot.h>
+#include <asm/pgtable.h>
+#include <asm/pgalloc.h>
+#include <asm/mmu_context.h>
+#include <asm/io.h>
+#include <asm/cacheflush.h>
+#include <asm/mach-types.h>
+
+const extern unsigned char relocate_new_kernel[];
+const extern unsigned int relocate_new_kernel_size;
+
+extern void setup_mm_for_reboot(char mode);
+
+extern unsigned long kexec_start_address;
+extern unsigned long kexec_indirection_page;
+extern unsigned long kexec_mach_type;
+
+/*
+ * Provide a dummy crash_notes definition while crash dump arrives to arm.
+ * This prevents breakage of crash_notes attribute in kernel/ksysfs.c.
+ */
+
+int machine_kexec_prepare(struct kimage *image)
+{
+ return 0;
+}
+
+void machine_kexec_cleanup(struct kimage *image)
+{
+}
+
+void machine_shutdown(void)
+{
+}
+
+void machine_crash_shutdown(struct pt_regs *regs)
+{
+}
+
+void machine_kexec(struct kimage *image)
+{
+ unsigned long page_list;
+ unsigned long reboot_code_buffer_phys;
+ void *reboot_code_buffer;
+
+
+ page_list = image->head & PAGE_MASK;
+
+ /* we need both effective and real address here */
+ reboot_code_buffer_phys =
+ page_to_pfn(image->control_code_page) << PAGE_SHIFT;
+ reboot_code_buffer = page_address(image->control_code_page);
+
+ /* Prepare parameters for reboot_code_buffer*/
+ kexec_start_address = image->start;
+ kexec_indirection_page = page_list;
+ kexec_mach_type = machine_arch_type;
+
+ /* copy our kernel relocation code to the control code page */
+ memcpy(reboot_code_buffer,
+ relocate_new_kernel, relocate_new_kernel_size);
+
+
+ flush_icache_range((unsigned long) reboot_code_buffer,
+ (unsigned long) reboot_code_buffer + KEXEC_CONTROL_CODE_SIZE);
+ printk(KERN_INFO "Bye!\n");
+
+ cpu_proc_fin();
+ setup_mm_for_reboot(0); /* mode is not used, so just pass 0*/
+ cpu_reset(reboot_code_buffer_phys);
+}
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index a9e8f7e..782af3c 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -36,7 +36,13 @@
#include <asm/uaccess.h>
#include <asm/mach/time.h>
-extern const char *processor_modes[];
+static const char *processor_modes[] = {
+ "USER_26", "FIQ_26" , "IRQ_26" , "SVC_26" , "UK4_26" , "UK5_26" , "UK6_26" , "UK7_26" ,
+ "UK8_26" , "UK9_26" , "UK10_26", "UK11_26", "UK12_26", "UK13_26", "UK14_26", "UK15_26",
+ "USER_32", "FIQ_32" , "IRQ_32" , "SVC_32" , "UK4_32" , "UK5_32" , "UK6_32" , "ABT_32" ,
+ "UK8_32" , "UK9_32" , "UK10_32", "UND_32" , "UK12_32", "UK13_32", "UK14_32", "SYS_32"
+};
+
extern void setup_mm_for_reboot(char mode);
static volatile int hlt_counter;
diff --git a/arch/arm/kernel/relocate_kernel.S b/arch/arm/kernel/relocate_kernel.S
new file mode 100644
index 0000000..7baadae
--- /dev/null
+++ b/arch/arm/kernel/relocate_kernel.S
@@ -0,0 +1,74 @@
+/*
+ * relocate_kernel.S - put the kernel image in place to boot
+ */
+
+#include <asm/kexec.h>
+
+ .globl relocate_new_kernel
+relocate_new_kernel:
+
+ ldr r0,kexec_indirection_page
+ ldr r1,kexec_start_address
+
+
+0: /* top, read another word for the indirection page */
+ ldr r3, [r0],#4
+
+ /* Is it a destination page. Put destination address to r4 */
+ tst r3,#1,0
+ beq 1f
+ bic r4,r3,#1
+ b 0b
+1:
+ /* Is it an indirection page */
+ tst r3,#2,0
+ beq 1f
+ bic r0,r3,#2
+ b 0b
+1:
+
+ /* are we done ? */
+ tst r3,#4,0
+ beq 1f
+ b 2f
+
+1:
+ /* is it source ? */
+ tst r3,#8,0
+ beq 0b
+ bic r3,r3,#8
+ mov r6,#1024
+9:
+ ldr r5,[r3],#4
+ str r5,[r4],#4
+ subs r6,r6,#1
+ bne 9b
+ b 0b
+
+2:
+ /* Jump to relocated kernel */
+ mov lr,r1
+ mov r0,#0
+ ldr r1,kexec_mach_type
+ mov r2,#0
+ mov pc,lr
+
+ .globl kexec_start_address
+kexec_start_address:
+ .long 0x0
+
+ .globl kexec_indirection_page
+kexec_indirection_page:
+ .long 0x0
+
+ .globl kexec_mach_type
+kexec_mach_type:
+ .long 0x0
+
+relocate_new_kernel_end:
+
+ .globl relocate_new_kernel_size
+relocate_new_kernel_size:
+ .long relocate_new_kernel_end - relocate_new_kernel
+
+
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index ed52215..03e37af 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -88,6 +88,9 @@
#ifdef MULTI_CACHE
struct cpu_cache_fns cpu_cache;
#endif
+#ifdef CONFIG_OUTER_CACHE
+struct outer_cache_fns outer_cache;
+#endif
struct stack {
u32 irq[3];
diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c
index ee47c53..f61decb 100644
--- a/arch/arm/kernel/time.c
+++ b/arch/arm/kernel/time.c
@@ -40,12 +40,14 @@
*/
struct sys_timer *system_timer;
+#if defined(CONFIG_RTC_DRV_CMOS) || defined(CONFIG_RTC_DRV_CMOS_MODULE)
/* this needs a better home */
DEFINE_SPINLOCK(rtc_lock);
-#ifdef CONFIG_SA1100_RTC_MODULE
+#ifdef CONFIG_RTC_DRV_CMOS_MODULE
EXPORT_SYMBOL(rtc_lock);
#endif
+#endif /* pc-style 'CMOS' RTC support */
/* change this if you have some constant time drift */
#define USECS_PER_JIFFY (1000000/HZ)
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index 9089156..2409560 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -32,13 +32,6 @@
#include "ptrace.h"
#include "signal.h"
-const char *processor_modes[]=
-{ "USER_26", "FIQ_26" , "IRQ_26" , "SVC_26" , "UK4_26" , "UK5_26" , "UK6_26" , "UK7_26" ,
- "UK8_26" , "UK9_26" , "UK10_26", "UK11_26", "UK12_26", "UK13_26", "UK14_26", "UK15_26",
- "USER_32", "FIQ_32" , "IRQ_32" , "SVC_32" , "UK4_32" , "UK5_32" , "UK6_32" , "ABT_32" ,
- "UK8_32" , "UK9_32" , "UK10_32", "UND_32" , "UK12_32", "UK13_32", "UK14_32", "SYS_32"
-};
-
static const char *handler[]= { "prefetch abort", "data abort", "address exception", "interrupt" };
#ifdef CONFIG_DEBUG_USER
@@ -289,7 +282,10 @@
regs->ARM_pc -= correction;
pc = (void __user *)instruction_pointer(regs);
- if (thumb_mode(regs)) {
+
+ if (processor_mode(regs) == SVC_MODE) {
+ instr = *(u32 *) pc;
+ } else if (thumb_mode(regs)) {
get_user(instr, (u16 __user *)pc);
} else {
get_user(instr, (u32 __user *)pc);
@@ -337,12 +333,11 @@
* It never returns, and never tries to sync. We hope that we can at least
* dump out some state information...
*/
-asmlinkage void bad_mode(struct pt_regs *regs, int reason, int proc_mode)
+asmlinkage void bad_mode(struct pt_regs *regs, int reason)
{
console_verbose();
- printk(KERN_CRIT "Bad mode in %s handler detected: mode %s\n",
- handler[reason], processor_modes[proc_mode]);
+ printk(KERN_CRIT "Bad mode in %s handler detected\n", handler[reason]);
die("Oops - bad mode", regs, 0);
local_irq_disable();
diff --git a/arch/arm/mach-at91rm9200/Kconfig b/arch/arm/mach-at91/Kconfig
similarity index 76%
rename from arch/arm/mach-at91rm9200/Kconfig
rename to arch/arm/mach-at91/Kconfig
index 9f11db8..bf0d962 100644
--- a/arch/arm/mach-at91rm9200/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -9,11 +9,14 @@
bool "AT91RM9200"
config ARCH_AT91SAM9260
- bool "AT91SAM9260"
+ bool "AT91SAM9260 or AT91SAM9XE"
config ARCH_AT91SAM9261
bool "AT91SAM9261"
+config ARCH_AT91SAM9263
+ bool "AT91SAM9263"
+
endchoice
# ----------------------------------------------------------
@@ -90,13 +93,22 @@
if ARCH_AT91SAM9260
-comment "AT91SAM9260 Board Type"
+comment "AT91SAM9260 Variants"
-config MACH_AT91SAM9260EK
- bool "Atmel AT91SAM9260-EK Evaluation Kit"
+config ARCH_AT91SAM9260_SAM9XE
+ bool "AT91SAM9XE"
depends on ARCH_AT91SAM9260
help
- Select this if you are using Atmel's AT91SAM9260-EK Evaluation Kit.
+ Select this if you are using Atmel's AT91SAM9XE System-on-Chip.
+ They are basicaly AT91SAM9260s with various sizes of embedded Flash.
+
+comment "AT91SAM9260 / AT91SAM9XE Board Type"
+
+config MACH_AT91SAM9260EK
+ bool "Atmel AT91SAM9260-EK / AT91SAM9XE Evaluation Kit"
+ depends on ARCH_AT91SAM9260
+ help
+ Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit
<http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933>
endif
@@ -118,17 +130,32 @@
# ----------------------------------------------------------
+if ARCH_AT91SAM9263
+
+comment "AT91SAM9263 Board Type"
+
+config MACH_AT91SAM9263EK
+ bool "Atmel AT91SAM9263-EK Evaluation Kit"
+ depends on ARCH_AT91SAM9263
+ help
+ Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit.
+ <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057>
+
+endif
+
+# ----------------------------------------------------------
+
comment "AT91 Board Options"
config MTD_AT91_DATAFLASH_CARD
bool "Enable DataFlash Card support"
- depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK)
+ depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK)
help
Enable support for the DataFlash card.
config MTD_NAND_AT91_BUSWIDTH_16
bool "Enable 16-bit data bus interface to NAND flash"
- depends on (MACH_AT91SAM9261EK || MACH_AT91SAM9260EK)
+ depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK)
help
On AT91SAM926x boards both types of NAND flash can be present
(8 and 16 bit data bus width).
diff --git a/arch/arm/mach-at91rm9200/Makefile b/arch/arm/mach-at91/Makefile
similarity index 88%
rename from arch/arm/mach-at91rm9200/Makefile
rename to arch/arm/mach-at91/Makefile
index cf77700..05de6cd 100644
--- a/arch/arm/mach-at91rm9200/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -13,6 +13,7 @@
obj-$(CONFIG_ARCH_AT91RM9200) += at91rm9200.o at91rm9200_time.o at91rm9200_devices.o
obj-$(CONFIG_ARCH_AT91SAM9260) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o
obj-$(CONFIG_ARCH_AT91SAM9261) += at91sam9261.o at91sam926x_time.o at91sam9261_devices.o
+obj-$(CONFIG_ARCH_AT91SAM9263) += at91sam9263.o at91sam926x_time.o at91sam9263_devices.o
# AT91RM9200 board-specific support
obj-$(CONFIG_MACH_ONEARM) += board-1arm.o
@@ -31,6 +32,9 @@
# AT91SAM9261 board-specific support
obj-$(CONFIG_MACH_AT91SAM9261EK) += board-sam9261ek.o
+# AT91SAM9263 board-specific support
+obj-$(CONFIG_MACH_AT91SAM9263EK) += board-sam9263ek.o
+
# LEDs support
led-$(CONFIG_ARCH_AT91RM9200DK) += leds.o
led-$(CONFIG_MACH_AT91RM9200EK) += leds.o
diff --git a/arch/arm/mach-at91rm9200/Makefile.boot b/arch/arm/mach-at91/Makefile.boot
similarity index 100%
rename from arch/arm/mach-at91rm9200/Makefile.boot
rename to arch/arm/mach-at91/Makefile.boot
diff --git a/arch/arm/mach-at91rm9200/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c
similarity index 89%
rename from arch/arm/mach-at91rm9200/at91rm9200.c
rename to arch/arm/mach-at91/at91rm9200.c
index a92e9a4..2ddcdd6 100644
--- a/arch/arm/mach-at91rm9200/at91rm9200.c
+++ b/arch/arm/mach-at91/at91rm9200.c
@@ -1,5 +1,5 @@
/*
- * arch/arm/mach-at91rm9200/at91rm9200.c
+ * arch/arm/mach-at91/at91rm9200.c
*
* Copyright (C) 2005 SAN People
*
@@ -117,6 +117,36 @@
.pmc_mask = 1 << AT91RM9200_ID_PIOD,
.type = CLK_TYPE_PERIPHERAL,
};
+static struct clk tc0_clk = {
+ .name = "tc0_clk",
+ .pmc_mask = 1 << AT91RM9200_ID_TC0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc1_clk = {
+ .name = "tc1_clk",
+ .pmc_mask = 1 << AT91RM9200_ID_TC1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc2_clk = {
+ .name = "tc2_clk",
+ .pmc_mask = 1 << AT91RM9200_ID_TC2,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc3_clk = {
+ .name = "tc3_clk",
+ .pmc_mask = 1 << AT91RM9200_ID_TC3,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc4_clk = {
+ .name = "tc4_clk",
+ .pmc_mask = 1 << AT91RM9200_ID_TC4,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc5_clk = {
+ .name = "tc5_clk",
+ .pmc_mask = 1 << AT91RM9200_ID_TC5,
+ .type = CLK_TYPE_PERIPHERAL,
+};
static struct clk *periph_clocks[] __initdata = {
&pioA_clk,
@@ -132,7 +162,12 @@
&twi_clk,
&spi_clk,
// ssc 0 .. ssc2
- // tc0 .. tc5
+ &tc0_clk,
+ &tc1_clk,
+ &tc2_clk,
+ &tc3_clk,
+ &tc4_clk,
+ &tc5_clk,
&ohci_clk,
ðer_clk,
// irq0 .. irq6
diff --git a/arch/arm/mach-at91rm9200/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
similarity index 98%
rename from arch/arm/mach-at91rm9200/at91rm9200_devices.c
rename to arch/arm/mach-at91/at91rm9200_devices.c
index 57fac72..2624a4f 100644
--- a/arch/arm/mach-at91rm9200/at91rm9200_devices.c
+++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -1,5 +1,5 @@
/*
- * arch/arm/mach-at91rm9200/at91rm9200_devices.c
+ * arch/arm/mach-at91/at91rm9200_devices.c
*
* Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
* Copyright (C) 2005 David Brownell
@@ -315,7 +315,7 @@
.num_resources = ARRAY_SIZE(mmc_resources),
};
-void __init at91_add_device_mmc(struct at91_mmc_data *data)
+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
{
if (!data)
return;
@@ -361,7 +361,7 @@
platform_device_register(&at91rm9200_mmc_device);
}
#else
-void __init at91_add_device_mmc(struct at91_mmc_data *data) {}
+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
#endif
@@ -594,6 +594,10 @@
void __init at91_init_leds(u8 cpu_led, u8 timer_led)
{
+ /* Enable GPIO to access the LEDs */
+ at91_set_gpio_output(cpu_led, 1);
+ at91_set_gpio_output(timer_led, 1);
+
at91_leds_cpu = cpu_led;
at91_leds_timer = timer_led;
}
diff --git a/arch/arm/mach-at91rm9200/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c
similarity index 98%
rename from arch/arm/mach-at91rm9200/at91rm9200_time.c
rename to arch/arm/mach-at91/at91rm9200_time.c
index b999e19..949199a 100644
--- a/arch/arm/mach-at91rm9200/at91rm9200_time.c
+++ b/arch/arm/mach-at91/at91rm9200_time.c
@@ -1,5 +1,5 @@
/*
- * linux/arch/arm/mach-at91rm9200/at91rm9200_time.c
+ * linux/arch/arm/mach-at91/at91rm9200_time.c
*
* Copyright (C) 2003 SAN People
* Copyright (C) 2003 ATMEL
diff --git a/arch/arm/mach-at91rm9200/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c
similarity index 79%
rename from arch/arm/mach-at91rm9200/at91sam9260.c
rename to arch/arm/mach-at91/at91sam9260.c
index b14871a..6ea41d8 100644
--- a/arch/arm/mach-at91rm9200/at91sam9260.c
+++ b/arch/arm/mach-at91/at91sam9260.c
@@ -1,5 +1,5 @@
/*
- * arch/arm/mach-at91rm9200/at91sam9260.c
+ * arch/arm/mach-at91/at91sam9260.c
*
* Copyright (C) 2006 SAN People
*
@@ -14,6 +14,7 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
+#include <asm/arch/cpu.h>
#include <asm/arch/at91sam9260.h>
#include <asm/arch/at91_pmc.h>
#include <asm/arch/at91_rstc.h>
@@ -27,7 +28,11 @@
.pfn = __phys_to_pfn(AT91_BASE_SYS),
.length = SZ_16K,
.type = MT_DEVICE,
- }, {
+ }
+};
+
+static struct map_desc at91sam9260_sram_desc[] __initdata = {
+ {
.virtual = AT91_IO_VIRT_BASE - AT91SAM9260_SRAM0_SIZE,
.pfn = __phys_to_pfn(AT91SAM9260_SRAM0_BASE),
.length = AT91SAM9260_SRAM0_SIZE,
@@ -37,7 +42,14 @@
.pfn = __phys_to_pfn(AT91SAM9260_SRAM1_BASE),
.length = AT91SAM9260_SRAM1_SIZE,
.type = MT_DEVICE,
- },
+ }
+};
+
+static struct map_desc at91sam9xe_sram_desc[] __initdata = {
+ {
+ .pfn = __phys_to_pfn(AT91SAM9XE_SRAM_BASE),
+ .type = MT_DEVICE,
+ }
};
/* --------------------------------------------------------------------
@@ -107,13 +119,28 @@
.pmc_mask = 1 << AT91SAM9260_ID_SPI1,
.type = CLK_TYPE_PERIPHERAL,
};
+static struct clk tc0_clk = {
+ .name = "tc0_clk",
+ .pmc_mask = 1 << AT91SAM9260_ID_TC0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc1_clk = {
+ .name = "tc1_clk",
+ .pmc_mask = 1 << AT91SAM9260_ID_TC1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc2_clk = {
+ .name = "tc2_clk",
+ .pmc_mask = 1 << AT91SAM9260_ID_TC2,
+ .type = CLK_TYPE_PERIPHERAL,
+};
static struct clk ohci_clk = {
.name = "ohci_clk",
.pmc_mask = 1 << AT91SAM9260_ID_UHP,
.type = CLK_TYPE_PERIPHERAL,
};
-static struct clk ether_clk = {
- .name = "ether_clk",
+static struct clk macb_clk = {
+ .name = "macb_clk",
.pmc_mask = 1 << AT91SAM9260_ID_EMAC,
.type = CLK_TYPE_PERIPHERAL,
};
@@ -137,6 +164,21 @@
.pmc_mask = 1 << AT91SAM9260_ID_US5,
.type = CLK_TYPE_PERIPHERAL,
};
+static struct clk tc3_clk = {
+ .name = "tc3_clk",
+ .pmc_mask = 1 << AT91SAM9260_ID_TC3,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc4_clk = {
+ .name = "tc4_clk",
+ .pmc_mask = 1 << AT91SAM9260_ID_TC4,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc5_clk = {
+ .name = "tc5_clk",
+ .pmc_mask = 1 << AT91SAM9260_ID_TC5,
+ .type = CLK_TYPE_PERIPHERAL,
+};
static struct clk *periph_clocks[] __initdata = {
&pioA_clk,
@@ -152,14 +194,18 @@
&spi0_clk,
&spi1_clk,
// ssc
- // tc0 .. tc2
+ &tc0_clk,
+ &tc1_clk,
+ &tc2_clk,
&ohci_clk,
- ðer_clk,
+ &macb_clk,
&isi_clk,
&usart3_clk,
&usart4_clk,
&usart5_clk,
- // tc3 .. tc5
+ &tc3_clk,
+ &tc4_clk,
+ &tc5_clk,
// irq0 .. irq2
};
@@ -213,7 +259,7 @@
static void at91sam9260_reset(void)
{
- at91_sys_write(AT91_RSTC_CR, (0xA5 << 24) | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
+ at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
}
@@ -221,11 +267,37 @@
* AT91SAM9260 processor initialization
* -------------------------------------------------------------------- */
+static void __init at91sam9xe_initialize(void)
+{
+ unsigned long cidr, sram_size;
+
+ cidr = at91_sys_read(AT91_DBGU_CIDR);
+
+ switch (cidr & AT91_CIDR_SRAMSIZ) {
+ case AT91_CIDR_SRAMSIZ_32K:
+ sram_size = 2 * SZ_16K;
+ break;
+ case AT91_CIDR_SRAMSIZ_16K:
+ default:
+ sram_size = SZ_16K;
+ }
+
+ at91sam9xe_sram_desc->virtual = AT91_IO_VIRT_BASE - sram_size;
+ at91sam9xe_sram_desc->length = sram_size;
+
+ iotable_init(at91sam9xe_sram_desc, ARRAY_SIZE(at91sam9xe_sram_desc));
+}
+
void __init at91sam9260_initialize(unsigned long main_clock)
{
/* Map peripherals */
iotable_init(at91sam9260_io_desc, ARRAY_SIZE(at91sam9260_io_desc));
+ if (cpu_is_at91sam9xe())
+ at91sam9xe_initialize();
+ else
+ iotable_init(at91sam9260_sram_desc, ARRAY_SIZE(at91sam9260_sram_desc));
+
at91_arch_reset = at91sam9260_reset;
at91_extern_irq = (1 << AT91SAM9260_ID_IRQ0) | (1 << AT91SAM9260_ID_IRQ1)
| (1 << AT91SAM9260_ID_IRQ2);
diff --git a/arch/arm/mach-at91rm9200/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
similarity index 97%
rename from arch/arm/mach-at91rm9200/at91sam9260_devices.c
rename to arch/arm/mach-at91/at91sam9260_devices.c
index f42d3a4..f7d342c 100644
--- a/arch/arm/mach-at91rm9200/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -1,5 +1,5 @@
/*
- * arch/arm/mach-at91rm9200/at91sam9260_devices.c
+ * arch/arm/mach-at91/at91sam9260_devices.c
*
* Copyright (C) 2006 Atmel
*
@@ -128,7 +128,7 @@
#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
static u64 eth_dmamask = 0xffffffffUL;
-static struct eth_platform_data eth_data;
+static struct at91_eth_data eth_data;
static struct resource eth_resources[] = {
[0] = {
@@ -155,7 +155,7 @@
.num_resources = ARRAY_SIZE(eth_resources),
};
-void __init at91_add_device_eth(struct eth_platform_data *data)
+void __init at91_add_device_eth(struct at91_eth_data *data)
{
if (!data)
return;
@@ -192,7 +192,7 @@
platform_device_register(&at91sam9260_eth_device);
}
#else
-void __init at91_add_device_eth(struct eth_platform_data *data) {}
+void __init at91_add_device_eth(struct at91_eth_data *data) {}
#endif
@@ -229,7 +229,7 @@
.num_resources = ARRAY_SIZE(mmc_resources),
};
-void __init at91_add_device_mmc(struct at91_mmc_data *data)
+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
{
if (!data)
return;
@@ -275,7 +275,7 @@
platform_device_register(&at91sam9260_mmc_device);
}
#else
-void __init at91_add_device_mmc(struct at91_mmc_data *data) {}
+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
#endif
@@ -515,6 +515,10 @@
void __init at91_init_leds(u8 cpu_led, u8 timer_led)
{
+ /* Enable GPIO to access the LEDs */
+ at91_set_gpio_output(cpu_led, 1);
+ at91_set_gpio_output(timer_led, 1);
+
at91_leds_cpu = cpu_led;
at91_leds_timer = timer_led;
}
diff --git a/arch/arm/mach-at91rm9200/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c
similarity index 92%
rename from arch/arm/mach-at91rm9200/at91sam9261.c
rename to arch/arm/mach-at91/at91sam9261.c
index d242bb8..784d1e6 100644
--- a/arch/arm/mach-at91rm9200/at91sam9261.c
+++ b/arch/arm/mach-at91/at91sam9261.c
@@ -1,5 +1,5 @@
/*
- * arch/arm/mach-at91rm9200/at91sam9261.c
+ * arch/arm/mach-at91/at91sam9261.c
*
* Copyright (C) 2005 SAN People
*
@@ -97,6 +97,21 @@
.pmc_mask = 1 << AT91SAM9261_ID_SPI1,
.type = CLK_TYPE_PERIPHERAL,
};
+static struct clk tc0_clk = {
+ .name = "tc0_clk",
+ .pmc_mask = 1 << AT91SAM9261_ID_TC0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc1_clk = {
+ .name = "tc1_clk",
+ .pmc_mask = 1 << AT91SAM9261_ID_TC1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc2_clk = {
+ .name = "tc2_clk",
+ .pmc_mask = 1 << AT91SAM9261_ID_TC2,
+ .type = CLK_TYPE_PERIPHERAL,
+};
static struct clk ohci_clk = {
.name = "ohci_clk",
.pmc_mask = 1 << AT91SAM9261_ID_UHP,
@@ -121,7 +136,9 @@
&spi0_clk,
&spi1_clk,
// ssc 0 .. ssc2
- // tc0 .. tc2
+ &tc0_clk,
+ &tc1_clk,
+ &tc2_clk,
&ohci_clk,
&lcdc_clk,
// irq0 .. irq2
@@ -208,7 +225,7 @@
static void at91sam9261_reset(void)
{
- at91_sys_write(AT91_RSTC_CR, (0xA5 << 24) | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
+ at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
}
diff --git a/arch/arm/mach-at91rm9200/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
similarity index 98%
rename from arch/arm/mach-at91rm9200/at91sam9261_devices.c
rename to arch/arm/mach-at91/at91sam9261_devices.c
index ed1d790..e150476 100644
--- a/arch/arm/mach-at91rm9200/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -1,5 +1,5 @@
/*
- * arch/arm/mach-at91rm9200/at91sam9261_devices.c
+ * arch/arm/mach-at91/at91sam9261_devices.c
*
* Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
* Copyright (C) 2005 David Brownell
@@ -159,7 +159,7 @@
.num_resources = ARRAY_SIZE(mmc_resources),
};
-void __init at91_add_device_mmc(struct at91_mmc_data *data)
+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
{
if (!data)
return;
@@ -192,7 +192,7 @@
platform_device_register(&at91sam9261_mmc_device);
}
#else
-void __init at91_add_device_mmc(struct at91_mmc_data *data) {}
+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
#endif
@@ -513,6 +513,10 @@
void __init at91_init_leds(u8 cpu_led, u8 timer_led)
{
+ /* Enable GPIO to access the LEDs */
+ at91_set_gpio_output(cpu_led, 1);
+ at91_set_gpio_output(timer_led, 1);
+
at91_leds_cpu = cpu_led;
at91_leds_timer = timer_led;
}
diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c
new file mode 100644
index 0000000..6aa342e
--- /dev/null
+++ b/arch/arm/mach-at91/at91sam9263.c
@@ -0,0 +1,313 @@
+/*
+ * arch/arm/mach-at91/at91sam9263.c
+ *
+ * Copyright (C) 2007 Atmel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/arch/at91sam9263.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_rstc.h>
+
+#include "generic.h"
+#include "clock.h"
+
+static struct map_desc at91sam9263_io_desc[] __initdata = {
+ {
+ .virtual = AT91_VA_BASE_SYS,
+ .pfn = __phys_to_pfn(AT91_BASE_SYS),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = AT91_IO_VIRT_BASE - AT91SAM9263_SRAM0_SIZE,
+ .pfn = __phys_to_pfn(AT91SAM9263_SRAM0_BASE),
+ .length = AT91SAM9263_SRAM0_SIZE,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = AT91_IO_VIRT_BASE - AT91SAM9263_SRAM0_SIZE - AT91SAM9263_SRAM1_SIZE,
+ .pfn = __phys_to_pfn(AT91SAM9263_SRAM1_BASE),
+ .length = AT91SAM9263_SRAM1_SIZE,
+ .type = MT_DEVICE,
+ },
+};
+
+/* --------------------------------------------------------------------
+ * Clocks
+ * -------------------------------------------------------------------- */
+
+/*
+ * The peripheral clocks.
+ */
+static struct clk pioA_clk = {
+ .name = "pioA_clk",
+ .pmc_mask = 1 << AT91SAM9263_ID_PIOA,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioB_clk = {
+ .name = "pioB_clk",
+ .pmc_mask = 1 << AT91SAM9263_ID_PIOB,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioCDE_clk = {
+ .name = "pioCDE_clk",
+ .pmc_mask = 1 << AT91SAM9263_ID_PIOCDE,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart0_clk = {
+ .name = "usart0_clk",
+ .pmc_mask = 1 << AT91SAM9263_ID_US0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart1_clk = {
+ .name = "usart1_clk",
+ .pmc_mask = 1 << AT91SAM9263_ID_US1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart2_clk = {
+ .name = "usart2_clk",
+ .pmc_mask = 1 << AT91SAM9263_ID_US2,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk mmc0_clk = {
+ .name = "mci0_clk",
+ .pmc_mask = 1 << AT91SAM9263_ID_MCI0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk mmc1_clk = {
+ .name = "mci1_clk",
+ .pmc_mask = 1 << AT91SAM9263_ID_MCI1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk twi_clk = {
+ .name = "twi_clk",
+ .pmc_mask = 1 << AT91SAM9263_ID_TWI,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi0_clk = {
+ .name = "spi0_clk",
+ .pmc_mask = 1 << AT91SAM9263_ID_SPI0,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi1_clk = {
+ .name = "spi1_clk",
+ .pmc_mask = 1 << AT91SAM9263_ID_SPI1,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk tcb_clk = {
+ .name = "tcb_clk",
+ .pmc_mask = 1 << AT91SAM9263_ID_TCB,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk macb_clk = {
+ .name = "macb_clk",
+ .pmc_mask = 1 << AT91SAM9263_ID_EMAC,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk udc_clk = {
+ .name = "udc_clk",
+ .pmc_mask = 1 << AT91SAM9263_ID_UDP,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk isi_clk = {
+ .name = "isi_clk",
+ .pmc_mask = 1 << AT91SAM9263_ID_ISI,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk lcdc_clk = {
+ .name = "lcdc_clk",
+ .pmc_mask = 1 << AT91SAM9263_ID_ISI,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+static struct clk ohci_clk = {
+ .name = "ohci_clk",
+ .pmc_mask = 1 << AT91SAM9263_ID_UHP,
+ .type = CLK_TYPE_PERIPHERAL,
+};
+
+static struct clk *periph_clocks[] __initdata = {
+ &pioA_clk,
+ &pioB_clk,
+ &pioCDE_clk,
+ &usart0_clk,
+ &usart1_clk,
+ &usart2_clk,
+ &mmc0_clk,
+ &mmc1_clk,
+ // can
+ &twi_clk,
+ &spi0_clk,
+ &spi1_clk,
+ // ssc0 .. ssc1
+ // ac97
+ &tcb_clk,
+ // pwmc
+ &macb_clk,
+ // 2dge
+ &udc_clk,
+ &isi_clk,
+ &lcdc_clk,
+ // dma
+ &ohci_clk,
+ // irq0 .. irq1
+};
+
+/*
+ * The four programmable clocks.
+ * You must configure pin multiplexing to bring these signals out.
+ */
+static struct clk pck0 = {
+ .name = "pck0",
+ .pmc_mask = AT91_PMC_PCK0,
+ .type = CLK_TYPE_PROGRAMMABLE,
+ .id = 0,
+};
+static struct clk pck1 = {
+ .name = "pck1",
+ .pmc_mask = AT91_PMC_PCK1,
+ .type = CLK_TYPE_PROGRAMMABLE,
+ .id = 1,
+};
+static struct clk pck2 = {
+ .name = "pck2",
+ .pmc_mask = AT91_PMC_PCK2,
+ .type = CLK_TYPE_PROGRAMMABLE,
+ .id = 2,
+};
+static struct clk pck3 = {
+ .name = "pck3",
+ .pmc_mask = AT91_PMC_PCK3,
+ .type = CLK_TYPE_PROGRAMMABLE,
+ .id = 3,
+};
+
+static void __init at91sam9263_register_clocks(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
+ clk_register(periph_clocks[i]);
+
+ clk_register(&pck0);
+ clk_register(&pck1);
+ clk_register(&pck2);
+ clk_register(&pck3);
+}
+
+/* --------------------------------------------------------------------
+ * GPIO
+ * -------------------------------------------------------------------- */
+
+static struct at91_gpio_bank at91sam9263_gpio[] = {
+ {
+ .id = AT91SAM9263_ID_PIOA,
+ .offset = AT91_PIOA,
+ .clock = &pioA_clk,
+ }, {
+ .id = AT91SAM9263_ID_PIOB,
+ .offset = AT91_PIOB,
+ .clock = &pioB_clk,
+ }, {
+ .id = AT91SAM9263_ID_PIOCDE,
+ .offset = AT91_PIOC,
+ .clock = &pioCDE_clk,
+ }, {
+ .id = AT91SAM9263_ID_PIOCDE,
+ .offset = AT91_PIOD,
+ .clock = &pioCDE_clk,
+ }, {
+ .id = AT91SAM9263_ID_PIOCDE,
+ .offset = AT91_PIOE,
+ .clock = &pioCDE_clk,
+ }
+};
+
+static void at91sam9263_reset(void)
+{
+ at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
+}
+
+
+/* --------------------------------------------------------------------
+ * AT91SAM9263 processor initialization
+ * -------------------------------------------------------------------- */
+
+void __init at91sam9263_initialize(unsigned long main_clock)
+{
+ /* Map peripherals */
+ iotable_init(at91sam9263_io_desc, ARRAY_SIZE(at91sam9263_io_desc));
+
+ at91_arch_reset = at91sam9263_reset;
+ at91_extern_irq = (1 << AT91SAM9263_ID_IRQ0) | (1 << AT91SAM9263_ID_IRQ1);
+
+ /* Init clock subsystem */
+ at91_clock_init(main_clock);
+
+ /* Register the processor-specific clocks */
+ at91sam9263_register_clocks();
+
+ /* Register GPIO subsystem */
+ at91_gpio_init(at91sam9263_gpio, 5);
+}
+
+/* --------------------------------------------------------------------
+ * Interrupt initialization
+ * -------------------------------------------------------------------- */
+
+/*
+ * The default interrupt priority levels (0 = lowest, 7 = highest).
+ */
+static unsigned int at91sam9263_default_irq_priority[NR_AIC_IRQS] __initdata = {
+ 7, /* Advanced Interrupt Controller (FIQ) */
+ 7, /* System Peripherals */
+ 0, /* Parallel IO Controller A */
+ 0, /* Parallel IO Controller B */
+ 0, /* Parallel IO Controller C, D and E */
+ 0,
+ 0,
+ 6, /* USART 0 */
+ 6, /* USART 1 */
+ 6, /* USART 2 */
+ 0, /* Multimedia Card Interface 0 */
+ 0, /* Multimedia Card Interface 1 */
+ 4, /* CAN */
+ 0, /* Two-Wire Interface */
+ 6, /* Serial Peripheral Interface 0 */
+ 6, /* Serial Peripheral Interface 1 */
+ 5, /* Serial Synchronous Controller 0 */
+ 5, /* Serial Synchronous Controller 1 */
+ 6, /* AC97 Controller */
+ 0, /* Timer Counter 0, 1 and 2 */
+ 0, /* Pulse Width Modulation Controller */
+ 3, /* Ethernet */
+ 0,
+ 0, /* 2D Graphic Engine */
+ 3, /* USB Device Port */
+ 0, /* Image Sensor Interface */
+ 3, /* LDC Controller */
+ 0, /* DMA Controller */
+ 0,
+ 3, /* USB Host port */
+ 0, /* Advanced Interrupt Controller (IRQ0) */
+ 0, /* Advanced Interrupt Controller (IRQ1) */
+};
+
+void __init at91sam9263_init_interrupts(unsigned int priority[NR_AIC_IRQS])
+{
+ if (!priority)
+ priority = at91sam9263_default_irq_priority;
+
+ /* Initialize the AIC interrupt controller */
+ at91_aic_init(priority);
+
+ /* Enable GPIO interrupts */
+ at91_gpio_irq_setup();
+}
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
new file mode 100644
index 0000000..d9af7ca
--- /dev/null
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -0,0 +1,818 @@
+/*
+ * arch/arm/mach-at91/at91sam9263_devices.c
+ *
+ * Copyright (C) 2007 Atmel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <linux/platform_device.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/at91sam9263.h>
+#include <asm/arch/at91sam926x_mc.h>
+#include <asm/arch/at91sam9263_matrix.h>
+
+#include "generic.h"
+
+#define SZ_512 0x00000200
+#define SZ_256 0x00000100
+#define SZ_16 0x00000010
+
+/* --------------------------------------------------------------------
+ * USB Host
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static u64 ohci_dmamask = 0xffffffffUL;
+static struct at91_usbh_data usbh_data;
+
+static struct resource usbh_resources[] = {
+ [0] = {
+ .start = AT91SAM9263_UHP_BASE,
+ .end = AT91SAM9263_UHP_BASE + SZ_1M - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9263_ID_UHP,
+ .end = AT91SAM9263_ID_UHP,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91_usbh_device = {
+ .name = "at91_ohci",
+ .id = -1,
+ .dev = {
+ .dma_mask = &ohci_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ .platform_data = &usbh_data,
+ },
+ .resource = usbh_resources,
+ .num_resources = ARRAY_SIZE(usbh_resources),
+};
+
+void __init at91_add_device_usbh(struct at91_usbh_data *data)
+{
+ int i;
+
+ if (!data)
+ return;
+
+ /* Enable VBus control for UHP ports */
+ for (i = 0; i < data->ports; i++) {
+ if (data->vbus_pin[i])
+ at91_set_gpio_output(data->vbus_pin[i], 0);
+ }
+
+ usbh_data = *data;
+ platform_device_register(&at91_usbh_device);
+}
+#else
+void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * USB Device (Gadget)
+ * -------------------------------------------------------------------- */
+
+#ifdef CONFIG_USB_GADGET_AT91
+static struct at91_udc_data udc_data;
+
+static struct resource udc_resources[] = {
+ [0] = {
+ .start = AT91SAM9263_BASE_UDP,
+ .end = AT91SAM9263_BASE_UDP + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9263_ID_UDP,
+ .end = AT91SAM9263_ID_UDP,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91_udc_device = {
+ .name = "at91_udc",
+ .id = -1,
+ .dev = {
+ .platform_data = &udc_data,
+ },
+ .resource = udc_resources,
+ .num_resources = ARRAY_SIZE(udc_resources),
+};
+
+void __init at91_add_device_udc(struct at91_udc_data *data)
+{
+ if (!data)
+ return;
+
+ if (data->vbus_pin) {
+ at91_set_gpio_input(data->vbus_pin, 0);
+ at91_set_deglitch(data->vbus_pin, 1);
+ }
+
+ /* Pullup pin is handled internally by USB device peripheral */
+
+ udc_data = *data;
+ platform_device_register(&at91_udc_device);
+}
+#else
+void __init at91_add_device_udc(struct at91_udc_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * Ethernet
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
+static u64 eth_dmamask = 0xffffffffUL;
+static struct at91_eth_data eth_data;
+
+static struct resource eth_resources[] = {
+ [0] = {
+ .start = AT91SAM9263_BASE_EMAC,
+ .end = AT91SAM9263_BASE_EMAC + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9263_ID_EMAC,
+ .end = AT91SAM9263_ID_EMAC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9263_eth_device = {
+ .name = "macb",
+ .id = -1,
+ .dev = {
+ .dma_mask = ð_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ .platform_data = ð_data,
+ },
+ .resource = eth_resources,
+ .num_resources = ARRAY_SIZE(eth_resources),
+};
+
+void __init at91_add_device_eth(struct at91_eth_data *data)
+{
+ if (!data)
+ return;
+
+ if (data->phy_irq_pin) {
+ at91_set_gpio_input(data->phy_irq_pin, 0);
+ at91_set_deglitch(data->phy_irq_pin, 1);
+ }
+
+ /* Pins used for MII and RMII */
+ at91_set_A_periph(AT91_PIN_PE21, 0); /* ETXCK_EREFCK */
+ at91_set_B_periph(AT91_PIN_PC25, 0); /* ERXDV */
+ at91_set_A_periph(AT91_PIN_PE25, 0); /* ERX0 */
+ at91_set_A_periph(AT91_PIN_PE26, 0); /* ERX1 */
+ at91_set_A_periph(AT91_PIN_PE27, 0); /* ERXER */
+ at91_set_A_periph(AT91_PIN_PE28, 0); /* ETXEN */
+ at91_set_A_periph(AT91_PIN_PE23, 0); /* ETX0 */
+ at91_set_A_periph(AT91_PIN_PE24, 0); /* ETX1 */
+ at91_set_A_periph(AT91_PIN_PE30, 0); /* EMDIO */
+ at91_set_A_periph(AT91_PIN_PE29, 0); /* EMDC */
+
+ if (!data->is_rmii) {
+ at91_set_A_periph(AT91_PIN_PE22, 0); /* ECRS */
+ at91_set_B_periph(AT91_PIN_PC26, 0); /* ECOL */
+ at91_set_B_periph(AT91_PIN_PC22, 0); /* ERX2 */
+ at91_set_B_periph(AT91_PIN_PC23, 0); /* ERX3 */
+ at91_set_B_periph(AT91_PIN_PC27, 0); /* ERXCK */
+ at91_set_B_periph(AT91_PIN_PC20, 0); /* ETX2 */
+ at91_set_B_periph(AT91_PIN_PC21, 0); /* ETX3 */
+ at91_set_B_periph(AT91_PIN_PC24, 0); /* ETXER */
+ }
+
+ eth_data = *data;
+ platform_device_register(&at91sam9263_eth_device);
+}
+#else
+void __init at91_add_device_eth(struct at91_eth_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * MMC / SD
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
+static u64 mmc_dmamask = 0xffffffffUL;
+static struct at91_mmc_data mmc0_data, mmc1_data;
+
+static struct resource mmc0_resources[] = {
+ [0] = {
+ .start = AT91SAM9263_BASE_MCI0,
+ .end = AT91SAM9263_BASE_MCI0 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9263_ID_MCI0,
+ .end = AT91SAM9263_ID_MCI0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9263_mmc0_device = {
+ .name = "at91_mci",
+ .id = 0,
+ .dev = {
+ .dma_mask = &mmc_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ .platform_data = &mmc0_data,
+ },
+ .resource = mmc0_resources,
+ .num_resources = ARRAY_SIZE(mmc0_resources),
+};
+
+static struct resource mmc1_resources[] = {
+ [0] = {
+ .start = AT91SAM9263_BASE_MCI1,
+ .end = AT91SAM9263_BASE_MCI1 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9263_ID_MCI1,
+ .end = AT91SAM9263_ID_MCI1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9263_mmc1_device = {
+ .name = "at91_mci",
+ .id = 1,
+ .dev = {
+ .dma_mask = &mmc_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ .platform_data = &mmc1_data,
+ },
+ .resource = mmc1_resources,
+ .num_resources = ARRAY_SIZE(mmc1_resources),
+};
+
+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
+{
+ if (!data)
+ return;
+
+ /* input/irq */
+ if (data->det_pin) {
+ at91_set_gpio_input(data->det_pin, 1);
+ at91_set_deglitch(data->det_pin, 1);
+ }
+ if (data->wp_pin)
+ at91_set_gpio_input(data->wp_pin, 1);
+ if (data->vcc_pin)
+ at91_set_gpio_output(data->vcc_pin, 0);
+
+ if (mmc_id == 0) { /* MCI0 */
+ /* CLK */
+ at91_set_A_periph(AT91_PIN_PA12, 0);
+
+ if (data->slot_b) {
+ /* CMD */
+ at91_set_A_periph(AT91_PIN_PA16, 1);
+
+ /* DAT0, maybe DAT1..DAT3 */
+ at91_set_A_periph(AT91_PIN_PA17, 1);
+ if (data->wire4) {
+ at91_set_A_periph(AT91_PIN_PA18, 1);
+ at91_set_A_periph(AT91_PIN_PA19, 1);
+ at91_set_A_periph(AT91_PIN_PA20, 1);
+ }
+ } else {
+ /* CMD */
+ at91_set_A_periph(AT91_PIN_PA1, 1);
+
+ /* DAT0, maybe DAT1..DAT3 */
+ at91_set_A_periph(AT91_PIN_PA0, 1);
+ if (data->wire4) {
+ at91_set_A_periph(AT91_PIN_PA3, 1);
+ at91_set_A_periph(AT91_PIN_PA4, 1);
+ at91_set_A_periph(AT91_PIN_PA5, 1);
+ }
+ }
+
+ mmc0_data = *data;
+ at91_clock_associate("mci0_clk", &at91sam9263_mmc1_device.dev, "mci_clk");
+ platform_device_register(&at91sam9263_mmc0_device);
+ } else { /* MCI1 */
+ /* CLK */
+ at91_set_A_periph(AT91_PIN_PA6, 0);
+
+ if (data->slot_b) {
+ /* CMD */
+ at91_set_A_periph(AT91_PIN_PA21, 1);
+
+ /* DAT0, maybe DAT1..DAT3 */
+ at91_set_A_periph(AT91_PIN_PA22, 1);
+ if (data->wire4) {
+ at91_set_A_periph(AT91_PIN_PA23, 1);
+ at91_set_A_periph(AT91_PIN_PA24, 1);
+ at91_set_A_periph(AT91_PIN_PA25, 1);
+ }
+ } else {
+ /* CMD */
+ at91_set_A_periph(AT91_PIN_PA7, 1);
+
+ /* DAT0, maybe DAT1..DAT3 */
+ at91_set_A_periph(AT91_PIN_PA8, 1);
+ if (data->wire4) {
+ at91_set_A_periph(AT91_PIN_PA9, 1);
+ at91_set_A_periph(AT91_PIN_PA10, 1);
+ at91_set_A_periph(AT91_PIN_PA11, 1);
+ }
+ }
+
+ mmc1_data = *data;
+ at91_clock_associate("mci1_clk", &at91sam9263_mmc1_device.dev, "mci_clk");
+ platform_device_register(&at91sam9263_mmc1_device);
+ }
+}
+#else
+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * NAND / SmartMedia
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
+static struct at91_nand_data nand_data;
+
+#define NAND_BASE AT91_CHIPSELECT_3
+
+static struct resource nand_resources[] = {
+ {
+ .start = NAND_BASE,
+ .end = NAND_BASE + SZ_256M - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device at91sam9263_nand_device = {
+ .name = "at91_nand",
+ .id = -1,
+ .dev = {
+ .platform_data = &nand_data,
+ },
+ .resource = nand_resources,
+ .num_resources = ARRAY_SIZE(nand_resources),
+};
+
+void __init at91_add_device_nand(struct at91_nand_data *data)
+{
+ unsigned long csa, mode;
+
+ if (!data)
+ return;
+
+ csa = at91_sys_read(AT91_MATRIX_EBI0CSA);
+ at91_sys_write(AT91_MATRIX_EBI0CSA, csa | AT91_MATRIX_EBI0_CS3A_SMC);
+
+ /* set the bus interface characteristics */
+ at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0)
+ | AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0));
+
+ at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3)
+ | AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3));
+
+ at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5));
+
+ if (data->bus_width_16)
+ mode = AT91_SMC_DBW_16;
+ else
+ mode = AT91_SMC_DBW_8;
+ at91_sys_write(AT91_SMC_MODE(3), mode | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(2));
+
+ /* enable pin */
+ if (data->enable_pin)
+ at91_set_gpio_output(data->enable_pin, 1);
+
+ /* ready/busy pin */
+ if (data->rdy_pin)
+ at91_set_gpio_input(data->rdy_pin, 1);
+
+ /* card detect pin */
+ if (data->det_pin)
+ at91_set_gpio_input(data->det_pin, 1);
+
+ nand_data = *data;
+ platform_device_register(&at91sam9263_nand_device);
+}
+#else
+void __init at91_add_device_nand(struct at91_nand_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * TWI (i2c)
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
+
+static struct resource twi_resources[] = {
+ [0] = {
+ .start = AT91SAM9263_BASE_TWI,
+ .end = AT91SAM9263_BASE_TWI + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9263_ID_TWI,
+ .end = AT91SAM9263_ID_TWI,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9263_twi_device = {
+ .name = "at91_i2c",
+ .id = -1,
+ .resource = twi_resources,
+ .num_resources = ARRAY_SIZE(twi_resources),
+};
+
+void __init at91_add_device_i2c(void)
+{
+ /* pins used for TWI interface */
+ at91_set_A_periph(AT91_PIN_PB4, 0); /* TWD */
+ at91_set_multi_drive(AT91_PIN_PB4, 1);
+
+ at91_set_A_periph(AT91_PIN_PB5, 0); /* TWCK */
+ at91_set_multi_drive(AT91_PIN_PB5, 1);
+
+ platform_device_register(&at91sam9263_twi_device);
+}
+#else
+void __init at91_add_device_i2c(void) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * SPI
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
+static u64 spi_dmamask = 0xffffffffUL;
+
+static struct resource spi0_resources[] = {
+ [0] = {
+ .start = AT91SAM9263_BASE_SPI0,
+ .end = AT91SAM9263_BASE_SPI0 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9263_ID_SPI0,
+ .end = AT91SAM9263_ID_SPI0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9263_spi0_device = {
+ .name = "atmel_spi",
+ .id = 0,
+ .dev = {
+ .dma_mask = &spi_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .resource = spi0_resources,
+ .num_resources = ARRAY_SIZE(spi0_resources),
+};
+
+static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA5, AT91_PIN_PA3, AT91_PIN_PA4, AT91_PIN_PB11 };
+
+static struct resource spi1_resources[] = {
+ [0] = {
+ .start = AT91SAM9263_BASE_SPI1,
+ .end = AT91SAM9263_BASE_SPI1 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9263_ID_SPI1,
+ .end = AT91SAM9263_ID_SPI1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9263_spi1_device = {
+ .name = "atmel_spi",
+ .id = 1,
+ .dev = {
+ .dma_mask = &spi_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .resource = spi1_resources,
+ .num_resources = ARRAY_SIZE(spi1_resources),
+};
+
+static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB15, AT91_PIN_PB16, AT91_PIN_PB17, AT91_PIN_PB18 };
+
+void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
+{
+ int i;
+ unsigned long cs_pin;
+ short enable_spi0 = 0;
+ short enable_spi1 = 0;
+
+ /* Choose SPI chip-selects */
+ for (i = 0; i < nr_devices; i++) {
+ if (devices[i].controller_data)
+ cs_pin = (unsigned long) devices[i].controller_data;
+ else if (devices[i].bus_num == 0)
+ cs_pin = spi0_standard_cs[devices[i].chip_select];
+ else
+ cs_pin = spi1_standard_cs[devices[i].chip_select];
+
+ if (devices[i].bus_num == 0)
+ enable_spi0 = 1;
+ else
+ enable_spi1 = 1;
+
+ /* enable chip-select pin */
+ at91_set_gpio_output(cs_pin, 1);
+
+ /* pass chip-select pin to driver */
+ devices[i].controller_data = (void *) cs_pin;
+ }
+
+ spi_register_board_info(devices, nr_devices);
+
+ /* Configure SPI bus(es) */
+ if (enable_spi0) {
+ at91_set_B_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */
+ at91_set_B_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */
+ at91_set_B_periph(AT91_PIN_PA2, 0); /* SPI1_SPCK */
+
+ at91_clock_associate("spi0_clk", &at91sam9263_spi0_device.dev, "spi_clk");
+ platform_device_register(&at91sam9263_spi0_device);
+ }
+ if (enable_spi1) {
+ at91_set_A_periph(AT91_PIN_PB12, 0); /* SPI1_MISO */
+ at91_set_A_periph(AT91_PIN_PB13, 0); /* SPI1_MOSI */
+ at91_set_A_periph(AT91_PIN_PB14, 0); /* SPI1_SPCK */
+
+ at91_clock_associate("spi1_clk", &at91sam9263_spi1_device.dev, "spi_clk");
+ platform_device_register(&at91sam9263_spi1_device);
+ }
+}
+#else
+void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * LEDs
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_LEDS)
+u8 at91_leds_cpu;
+u8 at91_leds_timer;
+
+void __init at91_init_leds(u8 cpu_led, u8 timer_led)
+{
+ /* Enable GPIO to access the LEDs */
+ at91_set_gpio_output(cpu_led, 1);
+ at91_set_gpio_output(timer_led, 1);
+
+ at91_leds_cpu = cpu_led;
+ at91_leds_timer = timer_led;
+}
+#else
+void __init at91_init_leds(u8 cpu_led, u8 timer_led) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ * UART
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_SERIAL_ATMEL)
+
+static struct resource dbgu_resources[] = {
+ [0] = {
+ .start = AT91_VA_BASE_SYS + AT91_DBGU,
+ .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91_ID_SYS,
+ .end = AT91_ID_SYS,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data dbgu_data = {
+ .use_dma_tx = 0,
+ .use_dma_rx = 0, /* DBGU not capable of receive DMA */
+ .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
+};
+
+static struct platform_device at91sam9263_dbgu_device = {
+ .name = "atmel_usart",
+ .id = 0,
+ .dev = {
+ .platform_data = &dbgu_data,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .resource = dbgu_resources,
+ .num_resources = ARRAY_SIZE(dbgu_resources),
+};
+
+static inline void configure_dbgu_pins(void)
+{
+ at91_set_A_periph(AT91_PIN_PC30, 0); /* DRXD */
+ at91_set_A_periph(AT91_PIN_PC31, 1); /* DTXD */
+}
+
+static struct resource uart0_resources[] = {
+ [0] = {
+ .start = AT91SAM9263_BASE_US0,
+ .end = AT91SAM9263_BASE_US0 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9263_ID_US0,
+ .end = AT91SAM9263_ID_US0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data uart0_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+};
+
+static struct platform_device at91sam9263_uart0_device = {
+ .name = "atmel_usart",
+ .id = 1,
+ .dev = {
+ .platform_data = &uart0_data,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .resource = uart0_resources,
+ .num_resources = ARRAY_SIZE(uart0_resources),
+};
+
+static inline void configure_usart0_pins(void)
+{
+ at91_set_A_periph(AT91_PIN_PA26, 1); /* TXD0 */
+ at91_set_A_periph(AT91_PIN_PA27, 0); /* RXD0 */
+ at91_set_A_periph(AT91_PIN_PA28, 0); /* RTS0 */
+ at91_set_A_periph(AT91_PIN_PA29, 0); /* CTS0 */
+}
+
+static struct resource uart1_resources[] = {
+ [0] = {
+ .start = AT91SAM9263_BASE_US1,
+ .end = AT91SAM9263_BASE_US1 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9263_ID_US1,
+ .end = AT91SAM9263_ID_US1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data uart1_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+};
+
+static struct platform_device at91sam9263_uart1_device = {
+ .name = "atmel_usart",
+ .id = 2,
+ .dev = {
+ .platform_data = &uart1_data,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .resource = uart1_resources,
+ .num_resources = ARRAY_SIZE(uart1_resources),
+};
+
+static inline void configure_usart1_pins(void)
+{
+ at91_set_A_periph(AT91_PIN_PD0, 1); /* TXD1 */
+ at91_set_A_periph(AT91_PIN_PD1, 0); /* RXD1 */
+ at91_set_B_periph(AT91_PIN_PD7, 0); /* RTS1 */
+ at91_set_B_periph(AT91_PIN_PD8, 0); /* CTS1 */
+}
+
+static struct resource uart2_resources[] = {
+ [0] = {
+ .start = AT91SAM9263_BASE_US2,
+ .end = AT91SAM9263_BASE_US2 + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9263_ID_US2,
+ .end = AT91SAM9263_ID_US2,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct atmel_uart_data uart2_data = {
+ .use_dma_tx = 1,
+ .use_dma_rx = 1,
+};
+
+static struct platform_device at91sam9263_uart2_device = {
+ .name = "atmel_usart",
+ .id = 3,
+ .dev = {
+ .platform_data = &uart2_data,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .resource = uart2_resources,
+ .num_resources = ARRAY_SIZE(uart2_resources),
+};
+
+static inline void configure_usart2_pins(void)
+{
+ at91_set_A_periph(AT91_PIN_PD2, 1); /* TXD2 */
+ at91_set_A_periph(AT91_PIN_PD3, 0); /* RXD2 */
+ at91_set_B_periph(AT91_PIN_PD5, 0); /* RTS2 */
+ at91_set_B_periph(AT91_PIN_PD6, 0); /* CTS2 */
+}
+
+struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
+struct platform_device *atmel_default_console_device; /* the serial console device */
+
+void __init at91_init_serial(struct at91_uart_config *config)
+{
+ int i;
+
+ /* Fill in list of supported UARTs */
+ for (i = 0; i < config->nr_tty; i++) {
+ switch (config->tty_map[i]) {
+ case 0:
+ configure_usart0_pins();
+ at91_uarts[i] = &at91sam9263_uart0_device;
+ at91_clock_associate("usart0_clk", &at91sam9263_uart0_device.dev, "usart");
+ break;
+ case 1:
+ configure_usart1_pins();
+ at91_uarts[i] = &at91sam9263_uart1_device;
+ at91_clock_associate("usart1_clk", &at91sam9263_uart1_device.dev, "usart");
+ break;
+ case 2:
+ configure_usart2_pins();
+ at91_uarts[i] = &at91sam9263_uart2_device;
+ at91_clock_associate("usart2_clk", &at91sam9263_uart2_device.dev, "usart");
+ break;
+ case 3:
+ configure_dbgu_pins();
+ at91_uarts[i] = &at91sam9263_dbgu_device;
+ at91_clock_associate("mck", &at91sam9263_dbgu_device.dev, "usart");
+ break;
+ default:
+ continue;
+ }
+ at91_uarts[i]->id = i; /* update ID number to mapped ID */
+ }
+
+ /* Set serial console device */
+ if (config->console_tty < ATMEL_MAX_UART)
+ atmel_default_console_device = at91_uarts[config->console_tty];
+ if (!atmel_default_console_device)
+ printk(KERN_INFO "AT91: No default serial console defined.\n");
+}
+
+void __init at91_add_device_serial(void)
+{
+ int i;
+
+ for (i = 0; i < ATMEL_MAX_UART; i++) {
+ if (at91_uarts[i])
+ platform_device_register(at91_uarts[i]);
+ }
+}
+#else
+void __init at91_init_serial(struct at91_uart_config *config) {}
+void __init at91_add_device_serial(void) {}
+#endif
+
+
+/* -------------------------------------------------------------------- */
+/*
+ * These devices are always present and don't need any board-specific
+ * setup.
+ */
+static int __init at91_add_standard_devices(void)
+{
+ return 0;
+}
+
+arch_initcall(at91_add_standard_devices);
diff --git a/arch/arm/mach-at91rm9200/at91sam926x_time.c b/arch/arm/mach-at91/at91sam926x_time.c
similarity index 94%
rename from arch/arm/mach-at91rm9200/at91sam926x_time.c
rename to arch/arm/mach-at91/at91sam926x_time.c
index 99df5f6..a4dded2 100644
--- a/arch/arm/mach-at91rm9200/at91sam926x_time.c
+++ b/arch/arm/mach-at91/at91sam926x_time.c
@@ -1,5 +1,5 @@
/*
- * linux/arch/arm/mach-at91rm9200/at91sam926x_time.c
+ * linux/arch/arm/mach-at91/at91sam926x_time.c
*
* Copyright (C) 2005-2006 M. Amine SAYA, ATMEL Rousset, France
* Revision 2005 M. Nicolas Diremdjian, ATMEL Rousset, France
@@ -30,7 +30,6 @@
* Returns number of microseconds since last timer interrupt. Note that interrupts
* will have been disabled by do_gettimeofday()
* 'LATCH' is hwclock ticks (see CLOCK_TICK_RATE in timex.h) per jiffy.
- * 'tick' is usecs per jiffy (linux/timex.h).
*/
static unsigned long at91sam926x_gettimeoffset(void)
{
@@ -39,7 +38,7 @@
elapsed = (PIT_PICNT(t) * LATCH) + PIT_CPIV(t); /* hardware clock cycles */
- return (unsigned long)(elapsed * 1000000) / LATCH;
+ return (unsigned long)(elapsed * jiffies_to_usecs(1)) / LATCH;
}
/*
diff --git a/arch/arm/mach-at91rm9200/board-1arm.c b/arch/arm/mach-at91/board-1arm.c
similarity index 97%
rename from arch/arm/mach-at91rm9200/board-1arm.c
rename to arch/arm/mach-at91/board-1arm.c
index 971c3e2..2d3d4b6 100644
--- a/arch/arm/mach-at91rm9200/board-1arm.c
+++ b/arch/arm/mach-at91/board-1arm.c
@@ -1,5 +1,5 @@
/*
- * linux/arch/arm/mach-at91rm9200/board-1arm.c
+ * linux/arch/arm/mach-at91/board-1arm.c
*
* Copyright (C) 2005 SAN People
*
diff --git a/arch/arm/mach-at91rm9200/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c
similarity index 97%
rename from arch/arm/mach-at91rm9200/board-carmeva.c
rename to arch/arm/mach-at91/board-carmeva.c
index 654f037..b451861 100644
--- a/arch/arm/mach-at91rm9200/board-carmeva.c
+++ b/arch/arm/mach-at91/board-carmeva.c
@@ -1,5 +1,5 @@
/*
- * linux/arch/arm/mach-at91rm9200/board-carmeva.c
+ * linux/arch/arm/mach-at91/board-carmeva.c
*
* Copyright (c) 2005 Peer Georgi
* Conitec Datasystems
@@ -134,7 +134,7 @@
/* Compact Flash */
// at91_add_device_cf(&carmeva_cf_data);
/* MMC */
- at91_add_device_mmc(&carmeva_mmc_data);
+ at91_add_device_mmc(0, &carmeva_mmc_data);
}
MACHINE_START(CARMEVA, "Carmeva")
diff --git a/arch/arm/mach-at91rm9200/board-csb337.c b/arch/arm/mach-at91/board-csb337.c
similarity index 78%
rename from arch/arm/mach-at91rm9200/board-csb337.c
rename to arch/arm/mach-at91/board-csb337.c
index b8bb805..e18a41e 100644
--- a/arch/arm/mach-at91rm9200/board-csb337.c
+++ b/arch/arm/mach-at91/board-csb337.c
@@ -1,5 +1,5 @@
/*
- * linux/arch/arm/mach-at91rm9200/board-csb337.c
+ * linux/arch/arm/mach-at91/board-csb337.c
*
* Copyright (C) 2005 SAN People
*
@@ -24,6 +24,7 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
+#include <linux/mtd/physmap.h>
#include <asm/hardware.h>
#include <asm/setup.h>
@@ -112,6 +113,42 @@
},
};
+#define CSB_FLASH_BASE AT91_CHIPSELECT_0
+#define CSB_FLASH_SIZE 0x800000
+
+static struct mtd_partition csb_flash_partitions[] = {
+ {
+ .name = "uMON flash",
+ .offset = 0,
+ .size = MTDPART_SIZ_FULL,
+ .mask_flags = MTD_WRITEABLE, /* read only */
+ }
+};
+
+static struct physmap_flash_data csb_flash_data = {
+ .width = 2,
+ .parts = csb_flash_partitions,
+ .nr_parts = ARRAY_SIZE(csb_flash_partitions),
+};
+
+static struct resource csb_flash_resources[] = {
+ {
+ .start = CSB_FLASH_BASE,
+ .end = CSB_FLASH_BASE + CSB_FLASH_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device csb_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &csb_flash_data,
+ },
+ .resource = csb_flash_resources,
+ .num_resources = ARRAY_SIZE(csb_flash_resources),
+};
+
static void __init csb337_board_init(void)
{
/* Serial */
@@ -130,7 +167,9 @@
/* SPI */
at91_add_device_spi(csb337_spi_devices, ARRAY_SIZE(csb337_spi_devices));
/* MMC */
- at91_add_device_mmc(&csb337_mmc_data);
+ at91_add_device_mmc(0, &csb337_mmc_data);
+ /* NOR flash */
+ platform_device_register(&csb_flash);
}
MACHINE_START(CSB337, "Cogent CSB337")
diff --git a/arch/arm/mach-at91rm9200/board-csb637.c b/arch/arm/mach-at91/board-csb637.c
similarity index 74%
rename from arch/arm/mach-at91rm9200/board-csb637.c
rename to arch/arm/mach-at91/board-csb637.c
index a29fa0e8..77f04b9 100644
--- a/arch/arm/mach-at91rm9200/board-csb637.c
+++ b/arch/arm/mach-at91/board-csb637.c
@@ -1,5 +1,5 @@
/*
- * linux/arch/arm/mach-at91rm9200/board-csb637.c
+ * linux/arch/arm/mach-at91/board-csb637.c
*
* Copyright (C) 2005 SAN People
*
@@ -23,6 +23,7 @@
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
#include <asm/hardware.h>
#include <asm/setup.h>
@@ -81,6 +82,42 @@
.pullup_pin = AT91_PIN_PB1,
};
+#define CSB_FLASH_BASE AT91_CHIPSELECT_0
+#define CSB_FLASH_SIZE 0x1000000
+
+static struct mtd_partition csb_flash_partitions[] = {
+ {
+ .name = "uMON flash",
+ .offset = 0,
+ .size = MTDPART_SIZ_FULL,
+ .mask_flags = MTD_WRITEABLE, /* read only */
+ }
+};
+
+static struct physmap_flash_data csb_flash_data = {
+ .width = 2,
+ .parts = csb_flash_partitions,
+ .nr_parts = ARRAY_SIZE(csb_flash_partitions),
+};
+
+static struct resource csb_flash_resources[] = {
+ {
+ .start = CSB_FLASH_BASE,
+ .end = CSB_FLASH_BASE + CSB_FLASH_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device csb_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &csb_flash_data,
+ },
+ .resource = csb_flash_resources,
+ .num_resources = ARRAY_SIZE(csb_flash_resources),
+};
+
static void __init csb637_board_init(void)
{
/* Serial */
@@ -95,6 +132,8 @@
at91_add_device_i2c();
/* SPI */
at91_add_device_spi(NULL, 0);
+ /* NOR flash */
+ platform_device_register(&csb_flash);
}
MACHINE_START(CSB637, "Cogent CSB637")
diff --git a/arch/arm/mach-at91rm9200/board-dk.c b/arch/arm/mach-at91/board-dk.c
similarity index 98%
rename from arch/arm/mach-at91rm9200/board-dk.c
rename to arch/arm/mach-at91/board-dk.c
index 7522bf9..6043c38 100644
--- a/arch/arm/mach-at91rm9200/board-dk.c
+++ b/arch/arm/mach-at91/board-dk.c
@@ -1,5 +1,5 @@
/*
- * linux/arch/arm/mach-at91rm9200/board-dk.c
+ * linux/arch/arm/mach-at91/board-dk.c
*
* Copyright (C) 2005 SAN People
*
@@ -194,7 +194,7 @@
#else
/* MMC */
at91_set_gpio_output(AT91_PIN_PB7, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */
- at91_add_device_mmc(&dk_mmc_data);
+ at91_add_device_mmc(0, &dk_mmc_data);
#endif
/* NAND */
at91_add_device_nand(&dk_nand_data);
diff --git a/arch/arm/mach-at91rm9200/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c
similarity index 96%
rename from arch/arm/mach-at91rm9200/board-eb9200.c
rename to arch/arm/mach-at91/board-eb9200.c
index 80b72cf..20458b5 100644
--- a/arch/arm/mach-at91rm9200/board-eb9200.c
+++ b/arch/arm/mach-at91/board-eb9200.c
@@ -1,5 +1,5 @@
/*
- * linux/arch/arm/mach-at91rm9200/board-eb9200.c
+ * linux/arch/arm/mach-at91/board-eb9200.c
*
* Copyright (C) 2005 SAN People, adapted for ATEB9200 from Embest
* by Andrew Patrikalakis
@@ -109,7 +109,7 @@
at91_add_device_spi(NULL, 0);
/* MMC */
/* only supports 1 or 4 bit interface, not wired through to SPI */
- at91_add_device_mmc(&eb9200_mmc_data);
+ at91_add_device_mmc(0, &eb9200_mmc_data);
}
MACHINE_START(ATEB9200, "Embest ATEB9200")
diff --git a/arch/arm/mach-at91rm9200/board-ek.c b/arch/arm/mach-at91/board-ek.c
similarity index 97%
rename from arch/arm/mach-at91rm9200/board-ek.c
rename to arch/arm/mach-at91/board-ek.c
index c4fdb41..322fdd7 100644
--- a/arch/arm/mach-at91rm9200/board-ek.c
+++ b/arch/arm/mach-at91/board-ek.c
@@ -1,5 +1,5 @@
/*
- * linux/arch/arm/mach-at91rm9200/board-ek.c
+ * linux/arch/arm/mach-at91/board-ek.c
*
* Copyright (C) 2005 SAN People
*
@@ -154,7 +154,7 @@
#else
/* MMC */
at91_set_gpio_output(AT91_PIN_PB22, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */
- at91_add_device_mmc(&ek_mmc_data);
+ at91_add_device_mmc(0, &ek_mmc_data);
#endif
/* NOR Flash */
platform_device_register(&ek_flash);
diff --git a/arch/arm/mach-at91rm9200/board-kafa.c b/arch/arm/mach-at91/board-kafa.c
similarity index 98%
rename from arch/arm/mach-at91rm9200/board-kafa.c
rename to arch/arm/mach-at91/board-kafa.c
index 6ef3c48..c77d84c 100644
--- a/arch/arm/mach-at91rm9200/board-kafa.c
+++ b/arch/arm/mach-at91/board-kafa.c
@@ -1,5 +1,5 @@
/*
- * linux/arch/arm/mach-at91rm9200/board-kafa.c
+ * linux/arch/arm/mach-at91/board-kafa.c
*
* Copyright (C) 2006 Sperry-Sun
*
diff --git a/arch/arm/mach-at91rm9200/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c
similarity index 97%
rename from arch/arm/mach-at91rm9200/board-kb9202.c
rename to arch/arm/mach-at91/board-kb9202.c
index 759d819..76f6e1e 100644
--- a/arch/arm/mach-at91rm9200/board-kb9202.c
+++ b/arch/arm/mach-at91/board-kb9202.c
@@ -1,5 +1,5 @@
/*
- * linux/arch/arm/mach-at91rm9200/board-kb9202.c
+ * linux/arch/arm/mach-at91/board-kb9202.c
*
* Copyright (c) 2005 kb_admin
* KwikByte, Inc.
@@ -122,7 +122,7 @@
/* USB Device */
at91_add_device_udc(&kb9202_udc_data);
/* MMC */
- at91_add_device_mmc(&kb9202_mmc_data);
+ at91_add_device_mmc(0, &kb9202_mmc_data);
/* I2C */
at91_add_device_i2c();
/* SPI */
diff --git a/arch/arm/mach-at91rm9200/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c
similarity index 96%
rename from arch/arm/mach-at91rm9200/board-sam9260ek.c
rename to arch/arm/mach-at91/board-sam9260ek.c
index da5d58a..57fb449 100644
--- a/arch/arm/mach-at91rm9200/board-sam9260ek.c
+++ b/arch/arm/mach-at91/board-sam9260ek.c
@@ -1,5 +1,5 @@
/*
- * linux/arch/arm/mach-at91rm9200/board-ek.c
+ * linux/arch/arm/mach-at91/board-sam9260ek.c
*
* Copyright (C) 2005 SAN People
* Copyright (C) 2006 Atmel
@@ -118,7 +118,7 @@
/*
* MACB Ethernet device
*/
-static struct __initdata eth_platform_data ek_macb_data = {
+static struct __initdata at91_eth_data ek_macb_data = {
.phy_irq_pin = AT91_PIN_PA7,
.is_rmii = 1,
};
@@ -187,7 +187,7 @@
/* Ethernet */
at91_add_device_eth(&ek_macb_data);
/* MMC */
- at91_add_device_mmc(&ek_mmc_data);
+ at91_add_device_mmc(0, &ek_mmc_data);
}
MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK")
diff --git a/arch/arm/mach-at91rm9200/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
similarity index 98%
rename from arch/arm/mach-at91rm9200/board-sam9261ek.c
rename to arch/arm/mach-at91/board-sam9261ek.c
index 30b490d..b7e7724 100644
--- a/arch/arm/mach-at91rm9200/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -1,5 +1,5 @@
/*
- * linux/arch/arm/mach-at91rm9200/board-ek.c
+ * linux/arch/arm/mach-at91/board-sam9261ek.c
*
* Copyright (C) 2005 SAN People
* Copyright (C) 2006 Atmel
@@ -243,7 +243,7 @@
at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
#else
/* MMC */
- at91_add_device_mmc(&ek_mmc_data);
+ at91_add_device_mmc(0, &ek_mmc_data);
#endif
}
diff --git a/arch/arm/mach-at91rm9200/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9263ek.c
similarity index 73%
copy from arch/arm/mach-at91rm9200/board-sam9260ek.c
copy to arch/arm/mach-at91/board-sam9263ek.c
index da5d58a..8fdce11 100644
--- a/arch/arm/mach-at91rm9200/board-sam9260ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -1,8 +1,8 @@
/*
- * linux/arch/arm/mach-at91rm9200/board-ek.c
+ * linux/arch/arm/mach-at91/board-sam9263ek.c
*
* Copyright (C) 2005 SAN People
- * Copyright (C) 2006 Atmel
+ * Copyright (C) 2007 Atmel Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -44,19 +44,19 @@
/*
* Serial port configuration.
- * 0 .. 5 = USART0 .. USART5
- * 6 = DBGU
+ * 0 .. 2 = USART0 .. USART2
+ * 3 = DBGU
*/
static struct at91_uart_config __initdata ek_uart_config = {
.console_tty = 0, /* ttyS0 */
- .nr_tty = 3,
- .tty_map = { 6, 0, 1, -1, -1, -1, -1 } /* ttyS0, ..., ttyS6 */
+ .nr_tty = 2,
+ .tty_map = { 3, 0, -1, -1, } /* ttyS0, ..., ttyS3 */
};
static void __init ek_map_io(void)
{
- /* Initialize processor: 18.432 MHz crystal */
- at91sam9260_initialize(18432000);
+ /* Initialize processor: 16.367 MHz crystal */
+ at91sam9263_initialize(16367660);
/* Setup the serial ports and console */
at91_init_serial(&ek_uart_config);
@@ -64,7 +64,7 @@
static void __init ek_init_irq(void)
{
- at91sam9260_init_interrupts(NULL);
+ at91sam9263_init_interrupts(NULL);
}
@@ -73,13 +73,14 @@
*/
static struct at91_usbh_data __initdata ek_usbh_data = {
.ports = 2,
+ .vbus_pin = { AT91_PIN_PA24, AT91_PIN_PA21 },
};
/*
* USB Device port
*/
static struct at91_udc_data __initdata ek_udc_data = {
- .vbus_pin = AT91_PIN_PC5,
+ .vbus_pin = AT91_PIN_PA25,
.pullup_pin = 0, /* pull-up driven by UDC */
};
@@ -88,13 +89,6 @@
* SPI devices.
*/
static struct spi_board_info ek_spi_devices[] = {
-#if !defined(CONFIG_MMC_AT91)
- { /* DataFlash chip */
- .modalias = "mtd_dataflash",
- .chip_select = 1,
- .max_speed_hz = 15 * 1000 * 1000,
- .bus_num = 0,
- },
#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
{ /* DataFlash card */
.modalias = "mtd_dataflash",
@@ -103,24 +97,17 @@
.bus_num = 0,
},
#endif
-#endif
-#if defined(CONFIG_SND_AT73C213)
- { /* AT73C213 DAC */
- .modalias = "snd_at73c213",
- .chip_select = 0,
- .max_speed_hz = 10 * 1000 * 1000,
- .bus_num = 1,
- },
-#endif
};
/*
- * MACB Ethernet device
+ * MCI (SD/MMC)
*/
-static struct __initdata eth_platform_data ek_macb_data = {
- .phy_irq_pin = AT91_PIN_PA7,
- .is_rmii = 1,
+static struct at91_mmc_data __initdata ek_mmc_data = {
+ .wire4 = 1,
+ .det_pin = AT91_PIN_PE18,
+ .wp_pin = AT91_PIN_PE19,
+// .vcc_pin = ... not connected
};
@@ -131,11 +118,11 @@
{
.name = "Partition 1",
.offset = 0,
- .size = 256 * 1024,
+ .size = 64 * 1024 * 1024,
},
{
.name = "Partition 2",
- .offset = 256 * 1024,
+ .offset = 64 * 1024 * 1024,
.size = MTDPART_SIZ_FULL,
},
};
@@ -150,8 +137,8 @@
.ale = 21,
.cle = 22,
// .det_pin = ... not connected
- .rdy_pin = AT91_PIN_PC13,
- .enable_pin = AT91_PIN_PC14,
+ .rdy_pin = AT91_PIN_PA22,
+ .enable_pin = AT91_PIN_PD15,
.partition_info = nand_partitions,
#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
.bus_width_16 = 1,
@@ -161,17 +148,6 @@
};
-/*
- * MCI (SD/MMC)
- */
-static struct at91_mmc_data __initdata ek_mmc_data = {
- .slot_b = 1,
- .wire4 = 1,
-// .det_pin = ... not connected
-// .wp_pin = ... not connected
-// .vcc_pin = ... not connected
-};
-
static void __init ek_board_init(void)
{
/* Serial */
@@ -182,15 +158,13 @@
at91_add_device_udc(&ek_udc_data);
/* SPI */
at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
+ /* MMC */
+ at91_add_device_mmc(1, &ek_mmc_data);
/* NAND */
at91_add_device_nand(&ek_nand_data);
- /* Ethernet */
- at91_add_device_eth(&ek_macb_data);
- /* MMC */
- at91_add_device_mmc(&ek_mmc_data);
}
-MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK")
+MACHINE_START(AT91SAM9263EK, "Atmel AT91SAM9263-EK")
/* Maintainer: Atmel */
.phys_io = AT91_BASE_SYS,
.io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
diff --git a/arch/arm/mach-at91rm9200/clock.c b/arch/arm/mach-at91/clock.c
similarity index 93%
rename from arch/arm/mach-at91rm9200/clock.c
rename to arch/arm/mach-at91/clock.c
index 36a8e4d..06c9a05 100644
--- a/arch/arm/mach-at91rm9200/clock.c
+++ b/arch/arm/mach-at91/clock.c
@@ -1,5 +1,5 @@
/*
- * linux/arch/arm/mach-at91rm9200/clock.c
+ * linux/arch/arm/mach-at91/clock.c
*
* Copyright (C) 2005 David Brownell
* Copyright (C) 2005 Ivan Kokshaysky
@@ -525,27 +525,6 @@
return 0;
}
-/*
- * Several unused clocks may be active. Turn them off.
- */
-static void __init at91_periphclk_reset(void)
-{
- unsigned long reg;
- struct clk *clk;
-
- reg = at91_sys_read(AT91_PMC_PCSR);
-
- list_for_each_entry(clk, &clocks, node) {
- if (clk->mode != pmc_periph_mode)
- continue;
-
- if (clk->users > 0)
- reg &= ~clk->pmc_mask;
- }
-
- at91_sys_write(AT91_PMC_PCDR, reg);
-}
-
static struct clk *const standard_pmc_clocks[] __initdata = {
/* four primary clocks */
&clk32k,
@@ -586,7 +565,7 @@
pr_info("Clocks: PLLA overclocked, %ld MHz\n", plla.rate_hz / 1000000);
/*
- * USB clock init: choose 48 MHz PLLB value, turn all clocks off,
+ * USB clock init: choose 48 MHz PLLB value,
* disable 48MHz clock during usb peripheral suspend.
*
* REVISIT: assumes MCK doesn't derive from PLLB!
@@ -596,16 +575,10 @@
if (cpu_is_at91rm9200()) {
uhpck.pmc_mask = AT91RM9200_PMC_UHP;
udpck.pmc_mask = AT91RM9200_PMC_UDP;
- at91_sys_write(AT91_PMC_SCDR, AT91RM9200_PMC_UHP | AT91RM9200_PMC_UDP);
at91_sys_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP);
- } else if (cpu_is_at91sam9260()) {
+ } else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263()) {
uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
udpck.pmc_mask = AT91SAM926x_PMC_UDP;
- at91_sys_write(AT91_PMC_SCDR, AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP);
- } else if (cpu_is_at91sam9261()) {
- uhpck.pmc_mask = (AT91SAM926x_PMC_UHP | AT91_PMC_HCK0);
- udpck.pmc_mask = AT91SAM926x_PMC_UDP;
- at91_sys_write(AT91_PMC_SCDR, AT91SAM926x_PMC_UHP | AT91_PMC_HCK0 | AT91SAM926x_PMC_UDP);
}
at91_sys_write(AT91_CKGR_PLLBR, 0);
@@ -634,11 +607,34 @@
(unsigned) main_clock / 1000000,
((unsigned) main_clock % 1000000) / 1000);
- /* disable all programmable clocks */
- at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK0 | AT91_PMC_PCK1 | AT91_PMC_PCK2 | AT91_PMC_PCK3);
+ return 0;
+}
- /* disable all other unused peripheral clocks */
- at91_periphclk_reset();
+/*
+ * Several unused clocks may be active. Turn them off.
+ */
+static int __init at91_clock_reset(void)
+{
+ unsigned long pcdr = 0;
+ unsigned long scdr = 0;
+ struct clk *clk;
+
+ list_for_each_entry(clk, &clocks, node) {
+ if (clk->users > 0)
+ continue;
+
+ if (clk->mode == pmc_periph_mode)
+ pcdr |= clk->pmc_mask;
+
+ if (clk->mode == pmc_sys_mode)
+ scdr |= clk->pmc_mask;
+
+ pr_debug("Clocks: disable unused %s\n", clk->name);
+ }
+
+ at91_sys_write(AT91_PMC_PCDR, pcdr);
+ at91_sys_write(AT91_PMC_SCDR, scdr);
return 0;
}
+late_initcall(at91_clock_reset);
diff --git a/arch/arm/mach-at91rm9200/clock.h b/arch/arm/mach-at91/clock.h
similarity index 94%
rename from arch/arm/mach-at91rm9200/clock.h
rename to arch/arm/mach-at91/clock.h
index b5c7a2e..1ba3b95 100644
--- a/arch/arm/mach-at91rm9200/clock.h
+++ b/arch/arm/mach-at91/clock.h
@@ -1,5 +1,5 @@
/*
- * linux/arch/arm/mach-at91rm9200/clock.h
+ * linux/arch/arm/mach-at91/clock.h
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
diff --git a/arch/arm/mach-at91rm9200/generic.h b/arch/arm/mach-at91/generic.h
similarity index 90%
rename from arch/arm/mach-at91rm9200/generic.h
rename to arch/arm/mach-at91/generic.h
index 8c4d5a7..bda2622 100644
--- a/arch/arm/mach-at91rm9200/generic.h
+++ b/arch/arm/mach-at91/generic.h
@@ -1,5 +1,5 @@
/*
- * linux/arch/arm/mach-at91rm9200/generic.h
+ * linux/arch/arm/mach-at91/generic.h
*
* Copyright (C) 2005 David Brownell
*
@@ -12,11 +12,13 @@
extern void __init at91rm9200_initialize(unsigned long main_clock, unsigned short banks);
extern void __init at91sam9260_initialize(unsigned long main_clock);
extern void __init at91sam9261_initialize(unsigned long main_clock);
+extern void __init at91sam9263_initialize(unsigned long main_clock);
/* Interrupts */
extern void __init at91rm9200_init_interrupts(unsigned int priority[]);
extern void __init at91sam9260_init_interrupts(unsigned int priority[]);
extern void __init at91sam9261_init_interrupts(unsigned int priority[]);
+extern void __init at91sam9263_init_interrupts(unsigned int priority[]);
extern void __init at91_aic_init(unsigned int priority[]);
/* Timer */
diff --git a/arch/arm/mach-at91rm9200/gpio.c b/arch/arm/mach-at91/gpio.c
similarity index 99%
rename from arch/arm/mach-at91rm9200/gpio.c
rename to arch/arm/mach-at91/gpio.c
index 15eb5b6..7b87f3f 100644
--- a/arch/arm/mach-at91rm9200/gpio.c
+++ b/arch/arm/mach-at91/gpio.c
@@ -1,5 +1,5 @@
/*
- * linux/arch/arm/mach-at91rm9200/gpio.c
+ * linux/arch/arm/mach-at91/gpio.c
*
* Copyright (C) 2005 HP Labs
*
diff --git a/arch/arm/mach-at91rm9200/irq.c b/arch/arm/mach-at91/irq.c
similarity index 98%
rename from arch/arm/mach-at91rm9200/irq.c
rename to arch/arm/mach-at91/irq.c
index 2148daaf..78a5cdb 100644
--- a/arch/arm/mach-at91rm9200/irq.c
+++ b/arch/arm/mach-at91/irq.c
@@ -1,5 +1,5 @@
/*
- * linux/arch/arm/mach-at91rm9200/irq.c
+ * linux/arch/arm/mach-at91/irq.c
*
* Copyright (C) 2004 SAN People
* Copyright (C) 2004 ATMEL
diff --git a/arch/arm/mach-at91rm9200/leds.c b/arch/arm/mach-at91/leds.c
similarity index 93%
rename from arch/arm/mach-at91rm9200/leds.c
rename to arch/arm/mach-at91/leds.c
index 1a33373..0d51449 100644
--- a/arch/arm/mach-at91rm9200/leds.c
+++ b/arch/arm/mach-at91/leds.c
@@ -86,10 +86,6 @@
if (!at91_leds_timer || !at91_leds_cpu)
return -ENODEV;
- /* Enable PIO to access the LEDs */
- at91_set_gpio_output(at91_leds_timer, 1);
- at91_set_gpio_output(at91_leds_cpu, 1);
-
leds_event = at91_leds_event;
leds_event(led_start);
diff --git a/arch/arm/mach-at91rm9200/pm.c b/arch/arm/mach-at91/pm.c
similarity index 97%
rename from arch/arm/mach-at91rm9200/pm.c
rename to arch/arm/mach-at91/pm.c
index 67aa557..b49bfda 100644
--- a/arch/arm/mach-at91rm9200/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -1,5 +1,5 @@
/*
- * arch/arm/mach-at91rm9200/pm.c
+ * arch/arm/mach-at91/pm.c
* AT91 Power Management
*
* Copyright (C) 2005 David Brownell
@@ -80,6 +80,8 @@
#warning "Check SAM9260 USB clocks"
} else if (cpu_is_at91sam9261()) {
#warning "Check SAM9261 USB clocks"
+ } else if (cpu_is_at91sam9263()) {
+#warning "Check SAM9263 USB clocks"
}
#ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS
diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig
index af7904b..575a21d 100644
--- a/arch/arm/mach-ep93xx/Kconfig
+++ b/arch/arm/mach-ep93xx/Kconfig
@@ -51,6 +51,31 @@
Say 'Y' here if you want your kernel to support the Glomation
GESBC-9312-sx board.
+config MACH_MICRO9
+ bool
+ default n
+
+config MACH_MICRO9H
+ bool "Support Contec Hypercontrol Micro9-H"
+ select MACH_MICRO9
+ help
+ Say 'Y' here if you want your kernel to support the
+ Contec Hypercontrol Micro9-H board.
+
+config MACH_MICRO9M
+ bool "Support Contec Hypercontrol Micro9-M"
+ select MACH_MICRO9
+ help
+ Say 'Y' here if you want your kernel to support the
+ Contec Hypercontrol Micro9-M board.
+
+config MACH_MICRO9L
+ bool "Support Contec Hypercontrol Micro9-L"
+ select MACH_MICRO9
+ help
+ Say 'Y' here if you want your kernel to support the
+ Contec Hypercontrol Micro9-L board.
+
config MACH_TS72XX
bool "Support Technologic Systems TS-72xx SBC"
help
diff --git a/arch/arm/mach-ep93xx/Makefile b/arch/arm/mach-ep93xx/Makefile
index b06641d..0d3bf93 100644
--- a/arch/arm/mach-ep93xx/Makefile
+++ b/arch/arm/mach-ep93xx/Makefile
@@ -13,4 +13,5 @@
obj-$(CONFIG_MACH_EDB9315) += edb9315.o
obj-$(CONFIG_MACH_EDB9315A) += edb9315a.o
obj-$(CONFIG_MACH_GESBC9312) += gesbc9312.o
+obj-$(CONFIG_MACH_MICRO9) += micro9.o
obj-$(CONFIG_MACH_TS72XX) += ts72xx.o
diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c
index 08ad782..f174d1a 100644
--- a/arch/arm/mach-ep93xx/clock.c
+++ b/arch/arm/mach-ep93xx/clock.c
@@ -13,6 +13,7 @@
#include <linux/kernel.h>
#include <linux/clk.h>
#include <linux/err.h>
+#include <linux/module.h>
#include <linux/string.h>
#include <asm/div64.h>
#include <asm/hardware.h>
@@ -124,7 +125,7 @@
return (unsigned long)rate;
}
-void ep93xx_clock_init(void)
+static int __init ep93xx_clock_init(void)
{
u32 value;
@@ -153,4 +154,7 @@
printk(KERN_INFO "ep93xx: FCLK %ld MHz, HCLK %ld MHz, PCLK %ld MHz\n",
clk_f.rate / 1000000, clk_h.rate / 1000000,
clk_p.rate / 1000000);
+
+ return 0;
}
+arch_initcall(ep93xx_clock_init);
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 6b26346..829aed6 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -152,22 +152,30 @@
/*************************************************************************
* GPIO handling for EP93xx
*************************************************************************/
-static unsigned char gpio_int_enable[2];
-static unsigned char gpio_int_type1[2];
-static unsigned char gpio_int_type2[2];
+static unsigned char gpio_int_unmasked[3];
+static unsigned char gpio_int_enabled[3];
+static unsigned char gpio_int_type1[3];
+static unsigned char gpio_int_type2[3];
-static void update_gpio_ab_int_params(int port)
+static void update_gpio_int_params(int abf)
{
- if (port == 0) {
+ if (abf == 0) {
__raw_writeb(0, EP93XX_GPIO_A_INT_ENABLE);
__raw_writeb(gpio_int_type2[0], EP93XX_GPIO_A_INT_TYPE2);
__raw_writeb(gpio_int_type1[0], EP93XX_GPIO_A_INT_TYPE1);
- __raw_writeb(gpio_int_enable[0], EP93XX_GPIO_A_INT_ENABLE);
- } else if (port == 1) {
+ __raw_writeb(gpio_int_unmasked[0] & gpio_int_enabled[0], EP93XX_GPIO_A_INT_ENABLE);
+ } else if (abf == 1) {
__raw_writeb(0, EP93XX_GPIO_B_INT_ENABLE);
__raw_writeb(gpio_int_type2[1], EP93XX_GPIO_B_INT_TYPE2);
__raw_writeb(gpio_int_type1[1], EP93XX_GPIO_B_INT_TYPE1);
- __raw_writeb(gpio_int_enable[1], EP93XX_GPIO_B_INT_ENABLE);
+ __raw_writeb(gpio_int_unmasked[1] & gpio_int_enabled[1], EP93XX_GPIO_B_INT_ENABLE);
+ } else if (abf == 2) {
+ __raw_writeb(0, EP93XX_GPIO_F_INT_ENABLE);
+ __raw_writeb(gpio_int_type2[2], EP93XX_GPIO_F_INT_TYPE2);
+ __raw_writeb(gpio_int_type1[2], EP93XX_GPIO_F_INT_TYPE1);
+ __raw_writeb(gpio_int_unmasked[2] & gpio_int_enabled[2], EP93XX_GPIO_F_INT_ENABLE);
+ } else {
+ BUG();
}
}
@@ -192,8 +200,13 @@
local_irq_save(flags);
if (direction == GPIO_OUT) {
if (line >= 0 && line < 16) {
- gpio_int_enable[line >> 3] &= ~(1 << (line & 7));
- update_gpio_ab_int_params(line >> 3);
+ /* Port A/B. */
+ gpio_int_unmasked[line >> 3] &= ~(1 << (line & 7));
+ update_gpio_int_params(line >> 3);
+ } else if (line >= 40 && line < 48) {
+ /* Port F. */
+ gpio_int_unmasked[2] &= ~(1 << (line & 7));
+ update_gpio_int_params(2);
}
v = __raw_readb(data_direction_register);
@@ -244,8 +257,7 @@
/*************************************************************************
* EP93xx IRQ handling
*************************************************************************/
-static void ep93xx_gpio_ab_irq_handler(unsigned int irq,
- struct irq_desc *desc)
+static void ep93xx_gpio_ab_irq_handler(unsigned int irq, struct irq_desc *desc)
{
unsigned char status;
int i;
@@ -267,37 +279,46 @@
}
}
-static void ep93xx_gpio_ab_irq_mask_ack(unsigned int irq)
+static void ep93xx_gpio_f_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+ int gpio_irq = IRQ_EP93XX_GPIO(16) + (((irq + 1) & 7) ^ 4);
+
+ desc_handle_irq(gpio_irq, irq_desc + gpio_irq);
+}
+
+static void ep93xx_gpio_irq_mask_ack(unsigned int irq)
{
int line = irq - IRQ_EP93XX_GPIO(0);
int port = line >> 3;
- gpio_int_enable[port] &= ~(1 << (line & 7));
- update_gpio_ab_int_params(port);
+ gpio_int_unmasked[port] &= ~(1 << (line & 7));
+ update_gpio_int_params(port);
- if (line >> 3) {
- __raw_writel(1 << (line & 7), EP93XX_GPIO_B_INT_ACK);
- } else {
+ if (port == 0) {
__raw_writel(1 << (line & 7), EP93XX_GPIO_A_INT_ACK);
+ } else if (port == 1) {
+ __raw_writel(1 << (line & 7), EP93XX_GPIO_B_INT_ACK);
+ } else if (port == 2) {
+ __raw_writel(1 << (line & 7), EP93XX_GPIO_F_INT_ACK);
}
}
-static void ep93xx_gpio_ab_irq_mask(unsigned int irq)
+static void ep93xx_gpio_irq_mask(unsigned int irq)
{
int line = irq - IRQ_EP93XX_GPIO(0);
int port = line >> 3;
- gpio_int_enable[port] &= ~(1 << (line & 7));
- update_gpio_ab_int_params(port);
+ gpio_int_unmasked[port] &= ~(1 << (line & 7));
+ update_gpio_int_params(port);
}
-static void ep93xx_gpio_ab_irq_unmask(unsigned int irq)
+static void ep93xx_gpio_irq_unmask(unsigned int irq)
{
int line = irq - IRQ_EP93XX_GPIO(0);
int port = line >> 3;
- gpio_int_enable[port] |= 1 << (line & 7);
- update_gpio_ab_int_params(port);
+ gpio_int_unmasked[port] |= 1 << (line & 7);
+ update_gpio_int_params(port);
}
@@ -306,40 +327,51 @@
* edge (1) triggered, while gpio_int_type2 controls whether it
* triggers on low/falling (0) or high/rising (1).
*/
-static int ep93xx_gpio_ab_irq_type(unsigned int irq, unsigned int type)
+static int ep93xx_gpio_irq_type(unsigned int irq, unsigned int type)
{
int port;
int line;
line = irq - IRQ_EP93XX_GPIO(0);
- gpio_line_config(line, GPIO_IN);
+ if (line >= 0 && line < 16) {
+ gpio_line_config(line, GPIO_IN);
+ } else {
+ gpio_line_config(EP93XX_GPIO_LINE_F(line), GPIO_IN);
+ }
port = line >> 3;
line &= 7;
if (type & IRQT_RISING) {
+ gpio_int_enabled[port] |= 1 << line;
gpio_int_type1[port] |= 1 << line;
gpio_int_type2[port] |= 1 << line;
} else if (type & IRQT_FALLING) {
+ gpio_int_enabled[port] |= 1 << line;
gpio_int_type1[port] |= 1 << line;
gpio_int_type2[port] &= ~(1 << line);
} else if (type & IRQT_HIGH) {
+ gpio_int_enabled[port] |= 1 << line;
gpio_int_type1[port] &= ~(1 << line);
gpio_int_type2[port] |= 1 << line;
} else if (type & IRQT_LOW) {
+ gpio_int_enabled[port] |= 1 << line;
gpio_int_type1[port] &= ~(1 << line);
gpio_int_type2[port] &= ~(1 << line);
+ } else {
+ gpio_int_enabled[port] &= ~(1 << line);
}
- update_gpio_ab_int_params(port);
+ update_gpio_int_params(port);
return 0;
}
-static struct irq_chip ep93xx_gpio_ab_irq_chip = {
- .ack = ep93xx_gpio_ab_irq_mask_ack,
- .mask = ep93xx_gpio_ab_irq_mask,
- .unmask = ep93xx_gpio_ab_irq_unmask,
- .set_type = ep93xx_gpio_ab_irq_type,
+static struct irq_chip ep93xx_gpio_irq_chip = {
+ .name = "GPIO",
+ .ack = ep93xx_gpio_irq_mask_ack,
+ .mask = ep93xx_gpio_irq_mask,
+ .unmask = ep93xx_gpio_irq_unmask,
+ .set_type = ep93xx_gpio_irq_type,
};
@@ -350,12 +382,21 @@
vic_init((void *)EP93XX_VIC1_BASE, 0, EP93XX_VIC1_VALID_IRQ_MASK);
vic_init((void *)EP93XX_VIC2_BASE, 32, EP93XX_VIC2_VALID_IRQ_MASK);
- for (irq = IRQ_EP93XX_GPIO(0) ; irq <= IRQ_EP93XX_GPIO(15); irq++) {
- set_irq_chip(irq, &ep93xx_gpio_ab_irq_chip);
+ for (irq = IRQ_EP93XX_GPIO(0); irq <= IRQ_EP93XX_GPIO(23); irq++) {
+ set_irq_chip(irq, &ep93xx_gpio_irq_chip);
set_irq_handler(irq, handle_level_irq);
set_irq_flags(irq, IRQF_VALID);
}
+
set_irq_chained_handler(IRQ_EP93XX_GPIO_AB, ep93xx_gpio_ab_irq_handler);
+ set_irq_chained_handler(IRQ_EP93XX_GPIO0MUX, ep93xx_gpio_f_irq_handler);
+ set_irq_chained_handler(IRQ_EP93XX_GPIO1MUX, ep93xx_gpio_f_irq_handler);
+ set_irq_chained_handler(IRQ_EP93XX_GPIO2MUX, ep93xx_gpio_f_irq_handler);
+ set_irq_chained_handler(IRQ_EP93XX_GPIO3MUX, ep93xx_gpio_f_irq_handler);
+ set_irq_chained_handler(IRQ_EP93XX_GPIO4MUX, ep93xx_gpio_f_irq_handler);
+ set_irq_chained_handler(IRQ_EP93XX_GPIO5MUX, ep93xx_gpio_f_irq_handler);
+ set_irq_chained_handler(IRQ_EP93XX_GPIO6MUX, ep93xx_gpio_f_irq_handler);
+ set_irq_chained_handler(IRQ_EP93XX_GPIO7MUX, ep93xx_gpio_f_irq_handler);
}
@@ -461,8 +502,6 @@
{
unsigned int v;
- ep93xx_clock_init();
-
/*
* Disallow access to MaverickCrunch initially.
*/
@@ -477,8 +516,4 @@
platform_device_register(&ep93xx_rtc_device);
platform_device_register(&ep93xx_ohci_device);
-
-#ifdef CONFIG_CRUNCH
- elf_hwcap |= HWCAP_CRUNCH;
-#endif
}
diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c
new file mode 100644
index 0000000..f28c129
--- /dev/null
+++ b/arch/arm/mach-ep93xx/micro9.c
@@ -0,0 +1,157 @@
+/*
+ * linux/arch/arm/mach-ep93xx/micro9.c
+ *
+ * Copyright (C) 2006 Contec Steuerungstechnik & Automation GmbH
+ * Manfred Gruber <manfred.gruber@contec.at>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+
+#include <linux/mtd/physmap.h>
+
+#include <asm/io.h>
+#include <asm/hardware.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+static struct ep93xx_eth_data micro9_eth_data = {
+ .phy_id = 0x1f,
+};
+
+static struct resource micro9_eth_resource[] = {
+ {
+ .start = EP93XX_ETHERNET_PHYS_BASE,
+ .end = EP93XX_ETHERNET_PHYS_BASE + 0xffff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_EP93XX_ETHERNET,
+ .end = IRQ_EP93XX_ETHERNET,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct platform_device micro9_eth_device = {
+ .name = "ep93xx-eth",
+ .id = -1,
+ .dev = {
+ .platform_data = µ9_eth_data,
+ },
+ .num_resources = ARRAY_SIZE(micro9_eth_resource),
+ .resource = micro9_eth_resource,
+};
+
+static void __init micro9_eth_init(void)
+{
+ memcpy(micro9_eth_data.dev_addr,
+ (void *)(EP93XX_ETHERNET_BASE + 0x50), 6);
+ platform_device_register(µ9_eth_device);
+}
+
+static void __init micro9_init(void)
+{
+ micro9_eth_init();
+}
+
+/*
+ * Micro9-H
+ */
+#ifdef CONFIG_MACH_MICRO9H
+static struct physmap_flash_data micro9h_flash_data = {
+ .width = 4,
+};
+
+static struct resource micro9h_flash_resource = {
+ .start = 0x10000000,
+ .end = 0x13ffffff,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device micro9h_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = µ9h_flash_data,
+ },
+ .num_resources = 1,
+ .resource = µ9h_flash_resource,
+};
+
+static void __init micro9h_init(void)
+{
+ platform_device_register(µ9h_flash);
+}
+
+static void __init micro9h_init_machine(void)
+{
+ ep93xx_init_devices();
+ micro9_init();
+ micro9h_init();
+}
+
+MACHINE_START(MICRO9, "Contec Hypercontrol Micro9-H")
+ /* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */
+ .phys_io = EP93XX_APB_PHYS_BASE,
+ .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = 0x00000100,
+ .map_io = ep93xx_map_io,
+ .init_irq = ep93xx_init_irq,
+ .timer = &ep93xx_timer,
+ .init_machine = micro9h_init_machine,
+MACHINE_END
+#endif
+
+/*
+ * Micro9-M
+ */
+#ifdef CONFIG_MACH_MICRO9M
+static void __init micro9m_init_machine(void)
+{
+ ep93xx_init_devices();
+ micro9_init();
+}
+
+MACHINE_START(MICRO9M, "Contec Hypercontrol Micro9-M")
+ /* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */
+ .phys_io = EP93XX_APB_PHYS_BASE,
+ .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = 0x00000100,
+ .map_io = ep93xx_map_io,
+ .init_irq = ep93xx_init_irq,
+ .timer = &ep93xx_timer,
+ .init_machine = micro9m_init_machine,
+MACHINE_END
+#endif
+
+/*
+ * Micro9-L
+ */
+#ifdef CONFIG_MACH_MICRO9L
+static void __init micro9l_init_machine(void)
+{
+ ep93xx_init_devices();
+ micro9_init();
+}
+
+MACHINE_START(MICRO9L, "Contec Hypercontrol Micro9-L")
+ /* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */
+ .phys_io = EP93XX_APB_PHYS_BASE,
+ .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = 0x00000100,
+ .map_io = ep93xx_map_io,
+ .init_irq = ep93xx_init_irq,
+ .timer = &ep93xx_timer,
+ .init_machine = micro9l_init_machine,
+MACHINE_END
+#endif
+
diff --git a/arch/arm/mach-iop13xx/irq.c b/arch/arm/mach-iop13xx/irq.c
index dbbc07c..162b932 100644
--- a/arch/arm/mach-iop13xx/irq.c
+++ b/arch/arm/mach-iop13xx/irq.c
@@ -250,11 +250,14 @@
.unmask = iop13xx_irq_unmask3,
};
+extern void iop_init_cp6_handler(void);
+
void __init iop13xx_init_irq(void)
{
unsigned int i;
u32 cp_flags = iop13xx_cp6_save();
+ iop_init_cp6_handler();
/* disable all interrupts */
write_intctl_0(0);
diff --git a/arch/arm/mach-iop32x/irq.c b/arch/arm/mach-iop32x/irq.c
index 3ec1cd5..8b0ac55 100644
--- a/arch/arm/mach-iop32x/irq.c
+++ b/arch/arm/mach-iop32x/irq.c
@@ -60,6 +60,8 @@
{
int i;
+ iop_init_cp6_handler();
+
intctl_write(0);
intstr_write(0);
if (machine_is_glantank() ||
diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c
index 2499a77..966aa51 100644
--- a/arch/arm/mach-iop32x/n2100.c
+++ b/arch/arm/mach-iop32x/n2100.c
@@ -120,6 +120,20 @@
.map_irq = n2100_pci_map_irq,
};
+/*
+ * Both r8169 chips on the n2100 exhibit PCI parity problems. Set
+ * the ->broken_parity_status flag for both ports so that the r8169
+ * driver knows it should ignore error interrupts.
+ */
+static void n2100_fixup_r8169(struct pci_dev *dev)
+{
+ if (dev->bus->number == 0 &&
+ (dev->devfn == PCI_DEVFN(1, 0) ||
+ dev->devfn == PCI_DEVFN(2, 0)))
+ dev->broken_parity_status = 1;
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_REALTEK, PCI_ANY_ID, n2100_fixup_r8169);
+
static int __init n2100_pci_init(void)
{
if (machine_is_n2100())
diff --git a/arch/arm/mach-iop33x/irq.c b/arch/arm/mach-iop33x/irq.c
index 00b37f3..effbe6b 100644
--- a/arch/arm/mach-iop33x/irq.c
+++ b/arch/arm/mach-iop33x/irq.c
@@ -110,6 +110,8 @@
{
int i;
+ iop_init_cp6_handler();
+
intctl0_write(0);
intctl1_write(0);
intstr0_write(0);
diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig
index e316bd9..8a339cd 100644
--- a/arch/arm/mach-ixp4xx/Kconfig
+++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -17,7 +17,7 @@
NSLU2 NAS device. For more information on this platform,
see http://www.nslu2-linux.org
-config ARCH_AVILA
+config MACH_AVILA
bool "Avila"
select PCI
help
@@ -25,6 +25,14 @@
Avila Network Platform. For more information on this platform,
see <file:Documentation/arm/IXP4xx>.
+config MACH_LOFT
+ bool "Loft"
+ depends on MACH_AVILA
+ help
+ Say 'Y' here if you want your kernel to support the Giant
+ Shoulder Inc Loft board (a minor variation on the standard
+ Gateworks Avila Network Platform).
+
config ARCH_ADI_COYOTE
bool "Coyote"
select PCI
@@ -86,7 +94,7 @@
#
config ARCH_IXDP4XX
bool
- depends on ARCH_IXDP425 || ARCH_AVILA || MACH_IXDP465
+ depends on ARCH_IXDP425 || MACH_IXDP465
default y
#
diff --git a/arch/arm/mach-ixp4xx/Makefile b/arch/arm/mach-ixp4xx/Makefile
index 640315d..746e297 100644
--- a/arch/arm/mach-ixp4xx/Makefile
+++ b/arch/arm/mach-ixp4xx/Makefile
@@ -6,6 +6,7 @@
obj-pci-n :=
obj-pci-$(CONFIG_ARCH_IXDP4XX) += ixdp425-pci.o
+obj-pci-$(CONFIG_MACH_AVILA) += avila-pci.o
obj-pci-$(CONFIG_MACH_IXDPG425) += ixdpg425-pci.o
obj-pci-$(CONFIG_ARCH_ADI_COYOTE) += coyote-pci.o
obj-pci-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o
@@ -15,6 +16,7 @@
obj-y += common.o
obj-$(CONFIG_ARCH_IXDP4XX) += ixdp425-setup.o
+obj-$(CONFIG_MACH_AVILA) += avila-setup.o
obj-$(CONFIG_MACH_IXDPG425) += coyote-setup.o
obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-setup.o
obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-setup.o
diff --git a/arch/arm/mach-ixp4xx/avila-pci.c b/arch/arm/mach-ixp4xx/avila-pci.c
new file mode 100644
index 0000000..3f86769
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/avila-pci.c
@@ -0,0 +1,78 @@
+/*
+ * arch/arm/mach-ixp4xx/avila-pci.c
+ *
+ * Gateworks Avila board-level PCI initialization
+ *
+ * Author: Michael-Luke Jones <mlj28@cam.ac.uk>
+ *
+ * Based on ixdp-pci.c
+ * Copyright (C) 2002 Intel Corporation.
+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
+ *
+ * Maintainer: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+
+#include <asm/mach/pci.h>
+#include <asm/irq.h>
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+
+void __init avila_pci_preinit(void)
+{
+ set_irq_type(IRQ_AVILA_PCI_INTA, IRQT_LOW);
+ set_irq_type(IRQ_AVILA_PCI_INTB, IRQT_LOW);
+ set_irq_type(IRQ_AVILA_PCI_INTC, IRQT_LOW);
+ set_irq_type(IRQ_AVILA_PCI_INTD, IRQT_LOW);
+
+ ixp4xx_pci_preinit();
+}
+
+static int __init avila_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ static int pci_irq_table[AVILA_PCI_IRQ_LINES] = {
+ IRQ_AVILA_PCI_INTA,
+ IRQ_AVILA_PCI_INTB,
+ IRQ_AVILA_PCI_INTC,
+ IRQ_AVILA_PCI_INTD
+ };
+
+ int irq = -1;
+
+ if (slot >= 1 &&
+ slot <= (machine_is_loft() ? LOFT_PCI_MAX_DEV : AVILA_PCI_MAX_DEV) &&
+ pin >= 1 && pin <= AVILA_PCI_IRQ_LINES) {
+ irq = pci_irq_table[(slot + pin - 2) % 4];
+ }
+
+ return irq;
+}
+
+struct hw_pci avila_pci __initdata = {
+ .nr_controllers = 1,
+ .preinit = avila_pci_preinit,
+ .swizzle = pci_std_swizzle,
+ .setup = ixp4xx_setup,
+ .scan = ixp4xx_scan_bus,
+ .map_irq = avila_map_irq,
+};
+
+int __init avila_pci_init(void)
+{
+ if (machine_is_avila() || machine_is_loft())
+ pci_common_init(&avila_pci);
+ return 0;
+}
+
+subsys_initcall(avila_pci_init);
+
diff --git a/arch/arm/mach-ixp4xx/avila-setup.c b/arch/arm/mach-ixp4xx/avila-setup.c
new file mode 100644
index 0000000..d59b8dc
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/avila-setup.c
@@ -0,0 +1,192 @@
+/*
+ * arch/arm/mach-ixp4xx/avila-setup.c
+ *
+ * Gateworks Avila board-setup
+ *
+ * Author: Michael-Luke Jones <mlj28@cam.ac.uk>
+ *
+ * Based on ixdp-setup.c
+ * Copyright (C) 2003-2005 MontaVista Software, Inc.
+ *
+ * Author: Deepak Saxena <dsaxena@plexity.net>
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/serial.h>
+#include <linux/tty.h>
+#include <linux/serial_8250.h>
+#include <linux/slab.h>
+
+#include <asm/types.h>
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+
+static struct flash_platform_data avila_flash_data = {
+ .map_name = "cfi_probe",
+ .width = 2,
+};
+
+static struct resource avila_flash_resource = {
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device avila_flash = {
+ .name = "IXP4XX-Flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &avila_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &avila_flash_resource,
+};
+
+static struct ixp4xx_i2c_pins avila_i2c_gpio_pins = {
+ .sda_pin = AVILA_SDA_PIN,
+ .scl_pin = AVILA_SCL_PIN,
+};
+
+static struct platform_device avila_i2c_controller = {
+ .name = "IXP4XX-I2C",
+ .id = 0,
+ .dev = {
+ .platform_data = &avila_i2c_gpio_pins,
+ },
+ .num_resources = 0
+};
+
+static struct resource avila_uart_resources[] = {
+ {
+ .start = IXP4XX_UART1_BASE_PHYS,
+ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
+ .flags = IORESOURCE_MEM
+ },
+ {
+ .start = IXP4XX_UART2_BASE_PHYS,
+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
+ .flags = IORESOURCE_MEM
+ }
+};
+
+static struct plat_serial8250_port avila_uart_data[] = {
+ {
+ .mapbase = IXP4XX_UART1_BASE_PHYS,
+ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
+ .irq = IRQ_IXP4XX_UART1,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ .uartclk = IXP4XX_UART_XTAL,
+ },
+ {
+ .mapbase = IXP4XX_UART2_BASE_PHYS,
+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
+ .irq = IRQ_IXP4XX_UART2,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ .uartclk = IXP4XX_UART_XTAL,
+ },
+ { },
+};
+
+static struct platform_device avila_uart = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev.platform_data = avila_uart_data,
+ .num_resources = 2,
+ .resource = avila_uart_resources
+};
+
+static struct resource avila_pata_resources[] = {
+ {
+ .flags = IORESOURCE_MEM
+ },
+ {
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "intrq",
+ .start = IRQ_IXP4XX_GPIO12,
+ .end = IRQ_IXP4XX_GPIO12,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct ixp4xx_pata_data avila_pata_data = {
+ .cs0_bits = 0xbfff0043,
+ .cs1_bits = 0xbfff0043,
+};
+
+static struct platform_device avila_pata = {
+ .name = "pata_ixp4xx_cf",
+ .id = 0,
+ .dev.platform_data = &avila_pata_data,
+ .num_resources = ARRAY_SIZE(avila_pata_resources),
+ .resource = avila_pata_resources,
+};
+
+static struct platform_device *avila_devices[] __initdata = {
+ &avila_i2c_controller,
+ &avila_flash,
+ &avila_uart
+};
+
+static void __init avila_init(void)
+{
+ ixp4xx_sys_init();
+
+ avila_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
+ avila_flash_resource.end =
+ IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
+
+ platform_add_devices(avila_devices, ARRAY_SIZE(avila_devices));
+
+ avila_pata_resources[0].start = IXP4XX_EXP_BUS_BASE(1);
+ avila_pata_resources[0].end = IXP4XX_EXP_BUS_END(1);
+
+ avila_pata_resources[1].start = IXP4XX_EXP_BUS_BASE(2);
+ avila_pata_resources[1].end = IXP4XX_EXP_BUS_END(2);
+
+ avila_pata_data.cs0_cfg = IXP4XX_EXP_CS1;
+ avila_pata_data.cs1_cfg = IXP4XX_EXP_CS2;
+
+ platform_device_register(&avila_pata);
+
+}
+
+MACHINE_START(AVILA, "Gateworks Avila Network Platform")
+ /* Maintainer: Deepak Saxena <dsaxena@plexity.net> */
+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
+ .map_io = ixp4xx_map_io,
+ .init_irq = ixp4xx_init_irq,
+ .timer = &ixp4xx_timer,
+ .boot_params = 0x0100,
+ .init_machine = avila_init,
+MACHINE_END
+
+ /*
+ * Loft is functionally equivalent to Avila except that it has a
+ * different number for the maximum PCI devices. The MACHINE
+ * structure below is identical to Avila except for the comment.
+ */
+#ifdef CONFIG_MACH_LOFT
+MACHINE_START(LOFT, "Giant Shoulder Inc Loft board")
+ /* Maintainer: Tom Billman <kernel@giantshoulderinc.com> */
+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
+ .map_io = ixp4xx_map_io,
+ .init_irq = ixp4xx_init_irq,
+ .timer = &ixp4xx_timer,
+ .boot_params = 0x0100,
+ .init_machine = avila_init,
+MACHINE_END
+#endif
+
diff --git a/arch/arm/mach-ixp4xx/ixdp425-pci.c b/arch/arm/mach-ixp4xx/ixdp425-pci.c
index d5156c0..99c1dc8 100644
--- a/arch/arm/mach-ixp4xx/ixdp425-pci.c
+++ b/arch/arm/mach-ixp4xx/ixdp425-pci.c
@@ -66,7 +66,7 @@
int __init ixdp425_pci_init(void)
{
if (machine_is_ixdp425() || machine_is_ixcdp1100() ||
- machine_is_avila() || machine_is_ixdp465())
+ machine_is_ixdp465())
pci_common_init(&ixdp425_pci);
return 0;
}
diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c
index da72383..04b1d56 100644
--- a/arch/arm/mach-ixp4xx/ixdp425-setup.c
+++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c
@@ -156,23 +156,3 @@
.init_machine = ixdp425_init,
MACHINE_END
#endif
-
-/*
- * Avila is functionally equivalent to IXDP425 except that it adds
- * a CF IDE slot hanging off the expansion bus. When we have a
- * driver for IXP4xx CF IDE with driver model support we'll move
- * Avila to it's own setup file.
- */
-#ifdef CONFIG_ARCH_AVILA
-MACHINE_START(AVILA, "Gateworks Avila Network Platform")
- /* Maintainer: Deepak Saxena <dsaxena@plexity.net> */
- .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
- .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
- .map_io = ixp4xx_map_io,
- .init_irq = ixp4xx_init_irq,
- .timer = &ixp4xx_timer,
- .boot_params = 0x0100,
- .init_machine = ixdp425_init,
-MACHINE_END
-#endif
-
diff --git a/arch/arm/mach-ns9xxx/Kconfig b/arch/arm/mach-ns9xxx/Kconfig
new file mode 100644
index 0000000..8175ba9
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/Kconfig
@@ -0,0 +1,21 @@
+if ARCH_NS9XXX
+
+menu "NS9xxx Implementations"
+
+config MACH_CC9P9360DEV
+ bool "Connect Core 9P 9360 on an A9M9750 Devboard"
+ select PROCESSOR_NS9360
+ select BOARD_A9M9750DEV
+ help
+ Say Y here if you are using the Digi Connect Core 9P 9360
+ on an A9M9750 Development Board.
+
+config PROCESSOR_NS9360
+ bool
+
+config BOARD_A9M9750DEV
+ bool
+
+endmenu
+
+endif
diff --git a/arch/arm/mach-ns9xxx/Makefile b/arch/arm/mach-ns9xxx/Makefile
new file mode 100644
index 0000000..91e945f
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/Makefile
@@ -0,0 +1,5 @@
+obj-y := irq.o time.o generic.o
+
+obj-$(CONFIG_MACH_CC9P9360DEV) += mach-cc9p9360dev.o
+
+obj-$(CONFIG_BOARD_A9M9750DEV) += board-a9m9750dev.o
diff --git a/arch/arm/mach-ns9xxx/Makefile.boot b/arch/arm/mach-ns9xxx/Makefile.boot
new file mode 100644
index 0000000..75ed64e
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/Makefile.boot
@@ -0,0 +1,2 @@
+zreladdr-y := 0x108000
+params_phys-y := 0x100
diff --git a/arch/arm/mach-ns9xxx/board-a9m9750dev.c b/arch/arm/mach-ns9xxx/board-a9m9750dev.c
new file mode 100644
index 0000000..2528988
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/board-a9m9750dev.c
@@ -0,0 +1,199 @@
+/*
+ * arch/arm/mach-ns9xxx/board-a9m9750dev.c
+ *
+ * Copyright (C) 2006,2007 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+#include <linux/irq.h>
+
+#include <asm/mach/map.h>
+
+#include <asm/arch-ns9xxx/board.h>
+#include <asm/arch-ns9xxx/regs-sys.h>
+#include <asm/arch-ns9xxx/regs-mem.h>
+#include <asm/arch-ns9xxx/regs-bbu.h>
+#include <asm/arch-ns9xxx/regs-board-a9m9750dev.h>
+
+#include "board-a9m9750dev.h"
+
+static struct map_desc board_a9m9750dev_io_desc[] __initdata = {
+ { /* FPGA on CS0 */
+ .virtual = io_p2v(NS9XXX_CSxSTAT_PHYS(0)),
+ .pfn = __phys_to_pfn(NS9XXX_CSxSTAT_PHYS(0)),
+ .length = NS9XXX_CS0STAT_LENGTH,
+ .type = MT_DEVICE,
+ },
+};
+
+void __init board_a9m9750dev_map_io(void)
+{
+ iotable_init(board_a9m9750dev_io_desc,
+ ARRAY_SIZE(board_a9m9750dev_io_desc));
+}
+
+static void a9m9750dev_fpga_ack_irq(unsigned int irq)
+{
+ /* nothing */
+}
+
+static void a9m9750dev_fpga_mask_irq(unsigned int irq)
+{
+ FPGA_IER &= ~(1 << (irq - FPGA_IRQ(0)));
+}
+
+static void a9m9750dev_fpga_maskack_irq(unsigned int irq)
+{
+ a9m9750dev_fpga_mask_irq(irq);
+ a9m9750dev_fpga_ack_irq(irq);
+}
+
+static void a9m9750dev_fpga_unmask_irq(unsigned int irq)
+{
+ FPGA_IER |= 1 << (irq - FPGA_IRQ(0));
+}
+
+static struct irq_chip a9m9750dev_fpga_chip = {
+ .ack = a9m9750dev_fpga_ack_irq,
+ .mask = a9m9750dev_fpga_mask_irq,
+ .mask_ack = a9m9750dev_fpga_maskack_irq,
+ .unmask = a9m9750dev_fpga_unmask_irq,
+};
+
+static void a9m9750dev_fpga_demux_handler(unsigned int irq,
+ struct irq_desc *desc)
+{
+ int stat = FPGA_ISR;
+
+ while (stat != 0) {
+ int irqno = fls(stat) - 1;
+
+ stat &= ~(1 << irqno);
+
+ desc = irq_desc + FPGA_IRQ(irqno);
+
+ desc_handle_irq(irqno, desc);
+ }
+}
+
+void __init board_a9m9750dev_init_irq(void)
+{
+ u32 reg;
+ int i;
+
+ /*
+ * configure gpio for IRQ_EXT2
+ * use GPIO 11, because GPIO 32 is used for the LCD
+ */
+ /* XXX: proper GPIO handling */
+ BBU_GC(2) &= ~0x2000;
+
+ for (i = FPGA_IRQ(0); i <= FPGA_IRQ(7); ++i) {
+ set_irq_chip(i, &a9m9750dev_fpga_chip);
+ set_irq_handler(i, handle_level_irq);
+ set_irq_flags(i, IRQF_VALID);
+ }
+
+ /* IRQ_EXT2: level sensitive + active low */
+ reg = SYS_EIC(2);
+ REGSET(reg, SYS_EIC, PLTY, AL);
+ REGSET(reg, SYS_EIC, LVEDG, LEVEL);
+ SYS_EIC(2) = reg;
+
+ set_irq_chained_handler(IRQ_EXT2,
+ a9m9750dev_fpga_demux_handler);
+}
+
+static struct plat_serial8250_port board_a9m9750dev_serial8250_port[] = {
+ {
+ .iobase = FPGA_UARTA_BASE,
+ .membase = (unsigned char*)FPGA_UARTA_BASE,
+ .mapbase = FPGA_UARTA_BASE,
+ .irq = IRQ_FPGA_UARTA,
+ .iotype = UPIO_MEM,
+ .uartclk = 18432000,
+ .regshift = 0,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ,
+ }, {
+ .iobase = FPGA_UARTB_BASE,
+ .membase = (unsigned char*)FPGA_UARTB_BASE,
+ .mapbase = FPGA_UARTB_BASE,
+ .irq = IRQ_FPGA_UARTB,
+ .iotype = UPIO_MEM,
+ .uartclk = 18432000,
+ .regshift = 0,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ,
+ }, {
+ .iobase = FPGA_UARTC_BASE,
+ .membase = (unsigned char*)FPGA_UARTC_BASE,
+ .mapbase = FPGA_UARTC_BASE,
+ .irq = IRQ_FPGA_UARTC,
+ .iotype = UPIO_MEM,
+ .uartclk = 18432000,
+ .regshift = 0,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ,
+ }, {
+ .iobase = FPGA_UARTD_BASE,
+ .membase = (unsigned char*)FPGA_UARTD_BASE,
+ .mapbase = FPGA_UARTD_BASE,
+ .irq = IRQ_FPGA_UARTD,
+ .iotype = UPIO_MEM,
+ .uartclk = 18432000,
+ .regshift = 0,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ,
+ }, {
+ /* end marker */
+ },
+};
+
+static struct platform_device board_a9m9750dev_serial_device = {
+ .name = "serial8250",
+ .dev = {
+ .platform_data = board_a9m9750dev_serial8250_port,
+ },
+};
+
+static struct platform_device *board_a9m9750dev_devices[] __initdata = {
+ &board_a9m9750dev_serial_device,
+};
+
+void __init board_a9m9750dev_init_machine(void)
+{
+ u32 reg;
+
+ /* setup static CS0: memory base ... */
+ REGSETIM(SYS_SMCSSMB(0), SYS_SMCSSMB, CSxB,
+ NS9XXX_CSxSTAT_PHYS(0) >> 12);
+
+ /* ... and mask */
+ reg = SYS_SMCSSMM(0);
+ REGSETIM(reg, SYS_SMCSSMM, CSxM, 0xfffff);
+ REGSET(reg, SYS_SMCSSMM, CSEx, EN);
+ SYS_SMCSSMM(0) = reg;
+
+ /* setup static CS0: memory configuration */
+ reg = MEM_SMC(0);
+ REGSET(reg, MEM_SMC, WSMC, OFF);
+ REGSET(reg, MEM_SMC, BSMC, OFF);
+ REGSET(reg, MEM_SMC, EW, OFF);
+ REGSET(reg, MEM_SMC, PB, 1);
+ REGSET(reg, MEM_SMC, PC, AL);
+ REGSET(reg, MEM_SMC, PM, DIS);
+ REGSET(reg, MEM_SMC, MW, 8);
+ MEM_SMC(0) = reg;
+
+ /* setup static CS0: timing */
+ MEM_SMWED(0) = 0x2;
+ MEM_SMOED(0) = 0x2;
+ MEM_SMRD(0) = 0x6;
+ MEM_SMWD(0) = 0x6;
+
+ platform_add_devices(board_a9m9750dev_devices,
+ ARRAY_SIZE(board_a9m9750dev_devices));
+}
+
diff --git a/arch/arm/mach-ns9xxx/board-a9m9750dev.h b/arch/arm/mach-ns9xxx/board-a9m9750dev.h
new file mode 100644
index 0000000..edc75ab
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/board-a9m9750dev.h
@@ -0,0 +1,15 @@
+/*
+ * arch/arm/mach-ns9xxx/board-a9m9750dev.h
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#include <linux/init.h>
+
+void __init board_a9m9750dev_map_io(void);
+void __init board_a9m9750dev_init_machine(void);
+void __init board_a9m9750dev_init_irq(void);
diff --git a/arch/arm/mach-ns9xxx/generic.c b/arch/arm/mach-ns9xxx/generic.c
new file mode 100644
index 0000000..83e2b65
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/generic.c
@@ -0,0 +1,42 @@
+/*
+ * arch/arm/mach-ns9xxx/generic.c
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <asm/memory.h>
+#include <asm/page.h>
+#include <asm/mach-types.h>
+#include <asm/mach/map.h>
+#include <asm/arch-ns9xxx/regs-sys.h>
+#include <asm/arch-ns9xxx/regs-mem.h>
+#include <asm/arch-ns9xxx/board.h>
+
+static struct map_desc standard_io_desc[] __initdata = {
+ { /* BBus */
+ .virtual = io_p2v(0x90000000),
+ .pfn = __phys_to_pfn(0x90000000),
+ .length = 0x00700000,
+ .type = MT_DEVICE,
+ }, { /* AHB */
+ .virtual = io_p2v(0xa0100000),
+ .pfn = __phys_to_pfn(0xa0100000),
+ .length = 0x00900000,
+ .type = MT_DEVICE,
+ },
+};
+
+void __init ns9xxx_map_io(void)
+{
+ iotable_init(standard_io_desc, ARRAY_SIZE(standard_io_desc));
+}
+
+void __init ns9xxx_init_machine(void)
+{
+}
diff --git a/arch/arm/mach-ns9xxx/generic.h b/arch/arm/mach-ns9xxx/generic.h
new file mode 100644
index 0000000..687e2917
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/generic.h
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-ns9xxx/generic.h
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#include <linux/time.h>
+#include <asm/mach/time.h>
+#include <linux/init.h>
+
+void __init ns9xxx_init_irq(void);
+void __init ns9xxx_map_io(void);
+void __init ns9xxx_init_machine(void);
+
+extern struct sys_timer ns9xxx_timer;
diff --git a/arch/arm/mach-ns9xxx/irq.c b/arch/arm/mach-ns9xxx/irq.c
new file mode 100644
index 0000000..83d9272
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/irq.c
@@ -0,0 +1,94 @@
+/*
+ * arch/arm/mach-ns9xxx/irq.c
+ *
+ * Copyright (C) 2006,2007 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#include <linux/interrupt.h>
+#include <asm/mach/irq.h>
+#include <asm/mach-types.h>
+#include <asm/arch-ns9xxx/regs-sys.h>
+#include <asm/arch-ns9xxx/irqs.h>
+#include <asm/arch-ns9xxx/board.h>
+
+#include "generic.h"
+
+static void ns9xxx_ack_irq_timer(unsigned int irq)
+{
+ u32 tc = SYS_TC(irq - IRQ_TIMER0);
+
+ REGSET(tc, SYS_TCx, INTC, SET);
+ SYS_TC(irq - IRQ_TIMER0) = tc;
+
+ REGSET(tc, SYS_TCx, INTC, UNSET);
+ SYS_TC(irq - IRQ_TIMER0) = tc;
+}
+
+void (*ns9xxx_ack_irq_functions[NR_IRQS])(unsigned int) = {
+ [IRQ_TIMER0] = ns9xxx_ack_irq_timer,
+ [IRQ_TIMER1] = ns9xxx_ack_irq_timer,
+ [IRQ_TIMER2] = ns9xxx_ack_irq_timer,
+ [IRQ_TIMER3] = ns9xxx_ack_irq_timer,
+};
+
+static void ns9xxx_mask_irq(unsigned int irq)
+{
+ /* XXX: better use cpp symbols */
+ SYS_IC(irq / 4) &= ~(1 << (7 + 8 * (3 - (irq & 3))));
+}
+
+static void ns9xxx_ack_irq(unsigned int irq)
+{
+ if (!ns9xxx_ack_irq_functions[irq]) {
+ printk(KERN_ERR "no ack function for irq %u\n", irq);
+ BUG();
+ }
+
+ ns9xxx_ack_irq_functions[irq](irq);
+ SYS_ISRADDR = 0;
+}
+
+static void ns9xxx_maskack_irq(unsigned int irq)
+{
+ ns9xxx_mask_irq(irq);
+ ns9xxx_ack_irq(irq);
+}
+
+static void ns9xxx_unmask_irq(unsigned int irq)
+{
+ /* XXX: better use cpp symbols */
+ SYS_IC(irq / 4) |= 1 << (7 + 8 * (3 - (irq & 3)));
+}
+
+static struct irq_chip ns9xxx_chip = {
+ .ack = ns9xxx_ack_irq,
+ .mask = ns9xxx_mask_irq,
+ .mask_ack = ns9xxx_maskack_irq,
+ .unmask = ns9xxx_unmask_irq,
+};
+
+void __init ns9xxx_init_irq(void)
+{
+ int i;
+
+ /* disable all IRQs */
+ for (i = 0; i < 8; ++i)
+ SYS_IC(i) = (4 * i) << 24 | (4 * i + 1) << 16 |
+ (4 * i + 2) << 8 | (4 * i + 3);
+
+ /* simple interrupt prio table:
+ * prio(x) < prio(y) <=> x < y
+ */
+ for (i = 0; i < 32; ++i)
+ SYS_IVA(i) = i;
+
+ for (i = IRQ_WATCHDOG; i <= IRQ_EXT3; ++i) {
+ set_irq_chip(i, &ns9xxx_chip);
+ set_irq_handler(i, handle_level_irq);
+ set_irq_flags(i, IRQF_VALID);
+ }
+}
diff --git a/arch/arm/mach-ns9xxx/mach-cc9p9360dev.c b/arch/arm/mach-ns9xxx/mach-cc9p9360dev.c
new file mode 100644
index 0000000..a193dd9
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/mach-cc9p9360dev.c
@@ -0,0 +1,41 @@
+/*
+ * arch/arm/mach-ns9xxx/mach-cc9p9360dev.c
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include "board-a9m9750dev.h"
+#include "generic.h"
+
+static void __init mach_cc9p9360dev_map_io(void)
+{
+ ns9xxx_map_io();
+ board_a9m9750dev_map_io();
+}
+
+static void __init mach_cc9p9360dev_init_irq(void)
+{
+ ns9xxx_init_irq();
+ board_a9m9750dev_init_irq();
+}
+
+static void __init mach_cc9p9360dev_init_machine(void)
+{
+ ns9xxx_init_machine();
+ board_a9m9750dev_init_machine();
+}
+
+MACHINE_START(CC9P9360DEV, "Connect Core 9P 9360 on an A9M9750 Devboard")
+ .map_io = mach_cc9p9360dev_map_io,
+ .init_irq = mach_cc9p9360dev_init_irq,
+ .init_machine = mach_cc9p9360dev_init_machine,
+ .timer = &ns9xxx_timer,
+ .boot_params = 0x100,
+MACHINE_END
diff --git a/arch/arm/mach-ns9xxx/time.c b/arch/arm/mach-ns9xxx/time.c
new file mode 100644
index 0000000..eec05f1
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/time.c
@@ -0,0 +1,88 @@
+/*
+ * arch/arm/mach-ns9xxx/time.c
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#include <linux/jiffies.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <asm/arch-ns9xxx/regs-sys.h>
+#include <asm/arch-ns9xxx/clock.h>
+#include <asm/arch-ns9xxx/irqs.h>
+#include <asm/arch/system.h>
+#include "generic.h"
+
+#define TIMERCLOCKSELECT 64
+
+static u32 usecs_per_tick;
+
+static irqreturn_t
+ns9xxx_timer_interrupt(int irq, void *dev_id)
+{
+ write_seqlock(&xtime_lock);
+ timer_tick();
+ write_sequnlock(&xtime_lock);
+
+ return IRQ_HANDLED;
+}
+
+static unsigned long ns9xxx_timer_gettimeoffset(void)
+{
+ /* return the microseconds which have passed since the last interrupt
+ * was _serviced_. That is, if an interrupt is pending or the counter
+ * reloads, return one periode more. */
+
+ u32 counter1 = SYS_TR(0);
+ int pending = SYS_ISR & (1 << IRQ_TIMER0);
+ u32 counter2 = SYS_TR(0);
+ u32 elapsed;
+
+ if (pending || counter2 > counter1)
+ elapsed = 2 * SYS_TRC(0) - counter2;
+ else
+ elapsed = SYS_TRC(0) - counter1;
+
+ return (elapsed * usecs_per_tick) >> 16;
+
+}
+
+static struct irqaction ns9xxx_timer_irq = {
+ .name = "NS9xxx Timer Tick",
+ .flags = IRQF_DISABLED | IRQF_TIMER,
+ .handler = ns9xxx_timer_interrupt,
+};
+
+static void __init ns9xxx_timer_init(void)
+{
+ int tc;
+
+ usecs_per_tick =
+ SH_DIV(1000000 * TIMERCLOCKSELECT, ns9xxx_cpuclock(), 16);
+
+ /* disable timer */
+ if ((tc = SYS_TC(0)) & SYS_TCx_TEN)
+ SYS_TC(0) = tc & ~SYS_TCx_TEN;
+
+ SYS_TRC(0) = SH_DIV(ns9xxx_cpuclock(), (TIMERCLOCKSELECT * HZ), 0);
+
+ REGSET(tc, SYS_TCx, TEN, EN);
+ REGSET(tc, SYS_TCx, TLCS, DIV64); /* This must match TIMERCLOCKSELECT */
+ REGSET(tc, SYS_TCx, INTS, EN);
+ REGSET(tc, SYS_TCx, UDS, DOWN);
+ REGSET(tc, SYS_TCx, TDBG, STOP);
+ REGSET(tc, SYS_TCx, TSZ, 32);
+ REGSET(tc, SYS_TCx, REN, EN);
+ SYS_TC(0) = tc;
+
+ setup_irq(IRQ_TIMER0, &ns9xxx_timer_irq);
+}
+
+struct sys_timer ns9xxx_timer = {
+ .init = ns9xxx_timer_init,
+ .offset = ns9xxx_timer_gettimeoffset,
+};
diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c
index 9de1278..390524c 100644
--- a/arch/arm/mach-pxa/generic.c
+++ b/arch/arm/mach-pxa/generic.c
@@ -338,6 +338,27 @@
.num_resources = ARRAY_SIZE(i2c_resources),
};
+#ifdef CONFIG_PXA27x
+static struct resource i2c_power_resources[] = {
+ {
+ .start = 0x40f00180,
+ .end = 0x40f001a3,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_PWRI2C,
+ .end = IRQ_PWRI2C,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device i2c_power_device = {
+ .name = "pxa2xx-i2c",
+ .id = 1,
+ .resource = i2c_power_resources,
+ .num_resources = ARRAY_SIZE(i2c_resources),
+};
+#endif
+
void __init pxa_set_i2c_info(struct i2c_pxa_platform_data *info)
{
i2c_device.dev.platform_data = info;
@@ -392,6 +413,9 @@
&stuart_device,
&pxaficp_device,
&i2c_device,
+#ifdef CONFIG_PXA27x
+ &i2c_power_device,
+#endif
&i2s_device,
&pxartc_device,
};
diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig
index 17f5f44..35156ca 100644
--- a/arch/arm/mach-realview/Kconfig
+++ b/arch/arm/mach-realview/Kconfig
@@ -10,10 +10,21 @@
config REALVIEW_MPCORE
bool "Support MPcore tile"
depends on MACH_REALVIEW_EB
+ select CACHE_L2X0
help
Enable support for the MPCore tile on the Realview platform.
Since there are device address and interrupt differences, a
kernel built with this option enabled is not compatible with
other tiles.
+config REALVIEW_MPCORE_REVB
+ bool "Support MPcore RevB tile"
+ depends on REALVIEW_MPCORE
+ default n
+ help
+ Enable support for the MPCore RevB tile on the Realview platform.
+ Since there are device address differences, a
+ kernel built with this option enabled is not compatible with
+ other tiles.
+
endmenu
diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c
index b8484e1..fce3596 100644
--- a/arch/arm/mach-realview/platsmp.c
+++ b/arch/arm/mach-realview/platsmp.c
@@ -52,13 +52,14 @@
* core (e.g. timer irq), then they will not have been enabled
* for us: do so
*/
- gic_cpu_init(__io_address(REALVIEW_GIC_CPU_BASE));
+ gic_cpu_init(0, __io_address(REALVIEW_GIC_CPU_BASE));
/*
* let the primary processor know we're out of the
* pen, then head off into the C entry point
*/
pen_release = -1;
+ smp_wmb();
/*
* Synchronise with the boot thread.
@@ -102,6 +103,7 @@
timeout = jiffies + (1 * HZ);
while (time_before(jiffies, timeout)) {
+ smp_rmb();
if (pen_release == -1)
break;
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index 9741b4d..3dba666 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -31,6 +31,7 @@
#include <asm/mach-types.h>
#include <asm/hardware/gic.h>
#include <asm/hardware/icst307.h>
+#include <asm/hardware/cache-l2x0.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -57,7 +58,26 @@
.pfn = __phys_to_pfn(REALVIEW_GIC_DIST_BASE),
.length = SZ_4K,
.type = MT_DEVICE,
+ },
+#ifdef CONFIG_REALVIEW_MPCORE
+ {
+ .virtual = IO_ADDRESS(REALVIEW_GIC1_CPU_BASE),
+ .pfn = __phys_to_pfn(REALVIEW_GIC1_CPU_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
}, {
+ .virtual = IO_ADDRESS(REALVIEW_GIC1_DIST_BASE),
+ .pfn = __phys_to_pfn(REALVIEW_GIC1_DIST_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = IO_ADDRESS(REALVIEW_MPCORE_L220_BASE),
+ .pfn = __phys_to_pfn(REALVIEW_MPCORE_L220_BASE),
+ .length = SZ_8K,
+ .type = MT_DEVICE,
+ },
+#endif
+ {
.virtual = IO_ADDRESS(REALVIEW_SCTL_BASE),
.pfn = __phys_to_pfn(REALVIEW_SCTL_BASE),
.length = SZ_4K,
@@ -138,19 +158,29 @@
#ifdef CONFIG_REALVIEW_MPCORE
unsigned int pldctrl;
writel(0x0000a05f, __io_address(REALVIEW_SYS_LOCK));
- pldctrl = readl(__io_address(REALVIEW_SYS_BASE) + 0xd8);
+ pldctrl = readl(__io_address(REALVIEW_SYS_BASE) + REALVIEW_MPCORE_SYS_PLD_CTRL1);
pldctrl |= 0x00800000; /* New irq mode */
- writel(pldctrl, __io_address(REALVIEW_SYS_BASE) + 0xd8);
+ writel(pldctrl, __io_address(REALVIEW_SYS_BASE) + REALVIEW_MPCORE_SYS_PLD_CTRL1);
writel(0x00000000, __io_address(REALVIEW_SYS_LOCK));
#endif
- gic_dist_init(__io_address(REALVIEW_GIC_DIST_BASE));
- gic_cpu_init(__io_address(REALVIEW_GIC_CPU_BASE));
+ gic_dist_init(0, __io_address(REALVIEW_GIC_DIST_BASE), 29);
+ gic_cpu_init(0, __io_address(REALVIEW_GIC_CPU_BASE));
+#ifdef CONFIG_REALVIEW_MPCORE
+ gic_dist_init(1, __io_address(REALVIEW_GIC1_DIST_BASE), 64);
+ gic_cpu_init(1, __io_address(REALVIEW_GIC1_CPU_BASE));
+ gic_cascade_irq(1, IRQ_EB_IRQ1);
+#endif
}
static void __init realview_eb_init(void)
{
int i;
+#ifdef CONFIG_REALVIEW_MPCORE
+ /* 1MB (128KB/way), 8-way associativity, evmon/parity/share enabled
+ * Bits: .... ...0 0111 1001 0000 .... .... .... */
+ l2x0_init(__io_address(REALVIEW_MPCORE_L220_BASE), 0x00790000, 0xfe000fff);
+#endif
clk_register(&realview_clcd_clk);
platform_device_register(&realview_flash_device);
diff --git a/arch/arm/mach-s3c2400/Kconfig b/arch/arm/mach-s3c2400/Kconfig
new file mode 100644
index 0000000..deab072
--- /dev/null
+++ b/arch/arm/mach-s3c2400/Kconfig
@@ -0,0 +1,13 @@
+# arch/arm/mach-s3c2400/Kconfig
+#
+# Copyright 2007 Simtec Electronics
+#
+# Licensed under GPLv2
+
+
+
+menu "S3C2400 Machines"
+
+
+endmenu
+
diff --git a/arch/arm/mach-s3c2400/Makefile b/arch/arm/mach-s3c2400/Makefile
new file mode 100644
index 0000000..7e23f4e
--- /dev/null
+++ b/arch/arm/mach-s3c2400/Makefile
@@ -0,0 +1,15 @@
+# arch/arm/mach-s3c2400/Makefile
+#
+# Copyright 2007 Simtec Electronics
+#
+# Licensed under GPLv2
+
+obj-y :=
+obj-m :=
+obj-n :=
+obj- :=
+
+obj-$(CONFIG_CPU_S3C2400) += gpio.o
+
+# Machine support
+
diff --git a/arch/arm/mach-s3c2410/s3c2400-gpio.c b/arch/arm/mach-s3c2400/gpio.c
similarity index 95%
rename from arch/arm/mach-s3c2410/s3c2400-gpio.c
rename to arch/arm/mach-s3c2400/gpio.c
index 1576d01..758e160 100644
--- a/arch/arm/mach-s3c2410/s3c2400-gpio.c
+++ b/arch/arm/mach-s3c2400/gpio.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c2410/s3c2400-gpio.c
+/* linux/arch/arm/mach-s3c2400/gpio.c
*
* Copyright (c) 2006 Lucas Correia Villa Real <lucasvr@gobolinux.org>
*
diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index eb4ec41..d4b013b 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -1,30 +1,69 @@
-if ARCH_S3C2410
+# arch/arm/mach-s3c2410/Kconfig
+#
+# Copyright 2007 Simtec Electronics
+#
+# Licensed under GPLv2
-menu "S3C24XX Implementations"
+config CPU_S3C2410
+ bool
+ depends on ARCH_S3C2410
+ select S3C2410_CLOCK
+ select S3C2410_GPIO
+ select S3C2410_PM if PM
+ help
+ Support for S3C2410 and S3C2410A family from the S3C24XX line
+ of Samsung Mobile CPUs.
-config MACH_AML_M5900
- bool "AML M5900 Series"
+config CPU_S3C2410_DMA
+ bool
+ depends on S3C2410_DMA && (CPU_S3C2410 || CPU_S3C2442)
+ default y if CPU_S3C2410 || CPU_S3C2442
+ help
+ DMA device selection for S3C2410 and compatible CPUs
+
+config S3C2410_PM
+ bool
+ help
+ Power Management code common to S3C2410 and better
+
+config S3C2410_GPIO
+ bool
+ help
+ GPIO code for S3C2410 and similar processors
+
+config S3C2410_CLOCK
+ bool
+ help
+ Clock code for the S3C2410, and similar processors
+
+
+menu "S3C2410 Machines"
+
+config ARCH_SMDK2410
+ bool "SMDK2410/A9M2410"
select CPU_S3C2410
- select PM_SIMTEC if PM
+ select MACH_SMDK
help
- Say Y here if you are using the American Microsystems M5900 Series
- <http://www.amltd.com>
+ Say Y here if you are using the SMDK2410 or the derived module A9M2410
+ <http://www.fsforth.de>
-config MACH_ANUBIS
- bool "Simtec Electronics ANUBIS"
- select CPU_S3C2440
- select PM_SIMTEC if PM
+config ARCH_H1940
+ bool "IPAQ H1940"
+ select CPU_S3C2410
+ select PM_H1940 if PM
help
- Say Y here if you are using the Simtec Electronics ANUBIS
- development system
+ Say Y here if you are using the HP IPAQ H1940
-config MACH_OSIRIS
- bool "Simtec IM2440D20 (OSIRIS) module"
- select CPU_S3C2440
- select PM_SIMTEC if PM
+config PM_H1940
+ bool
help
- Say Y here if you are using the Simtec IM2440D20 module, also
- known as the Osiris.
+ Internal node for H1940 and related PM
+
+config MACH_N30
+ bool "Acer N30"
+ select CPU_S3C2410
+ help
+ Say Y here if you are using the Acer N30
config ARCH_BAST
bool "Simtec Electronics BAST (EB2410ITX)"
@@ -35,7 +74,19 @@
Say Y here if you are using the Simtec Electronics EB2410ITX
development board (also known as BAST)
- Product page: <http://www.simtec.co.uk/products/EB2410ITX/>.
+config MACH_OTOM
+ bool "NexVision OTOM Board"
+ select CPU_S3C2410
+ help
+ Say Y here if you are using the Nex Vision OTOM board
+
+config MACH_AML_M5900
+ bool "AML M5900 Series"
+ select CPU_S3C2410
+ select PM_SIMTEC if PM
+ help
+ Say Y here if you are using the American Microsystems M5900 Series
+ <http://www.amltd.com>
config BAST_PC104_IRQ
bool "BAST PC104 IRQ support"
@@ -45,74 +96,6 @@
Say Y here to enable the PC104 IRQ routing on the
Simtec BAST (EB2410ITX)
-config PM_H1940
- bool
- help
- Internal node for H1940 and related PM
-
-config ARCH_H1940
- bool "IPAQ H1940"
- select CPU_S3C2410
- select PM_H1940 if PM
- help
- Say Y here if you are using the HP IPAQ H1940
-
- <http://www.handhelds.org/projects/h1940.html>.
-
-config MACH_N30
- bool "Acer N30"
- select CPU_S3C2410
- help
- Say Y here if you are using the Acer N30
-
- <http://zoo.weinigel.se/n30>.
-
-config MACH_SMDK
- bool
- help
- Common machine code for SMDK2410 and SMDK2440
-
-config ARCH_SMDK2410
- bool "SMDK2410/A9M2410"
- select CPU_S3C2410
- select MACH_SMDK
- help
- Say Y here if you are using the SMDK2410 or the derived module A9M2410
- <http://www.fsforth.de>
-
-config ARCH_S3C2440
- bool "SMDK2440"
- select CPU_S3C2440
- select MACH_SMDK
- help
- Say Y here if you are using the SMDK2440.
-
-config SMDK2440_CPU2440
- bool "SMDK2440 with S3C2440 CPU module"
- depends on ARCH_S3C2440
- default y if ARCH_S3C2440
- select CPU_S3C2440
-
-config SMDK2440_CPU2442
- bool "SMDM2440 with S3C2442 CPU module"
- depends on ARCH_S3C2440
- select CPU_S3C2442
-
-config MACH_S3C2413
- bool
- help
- Internal node for S3C2413 version of SMDK2413, so that
- machine_is_s3c2413() will work when MACH_SMDK2413 is
- selected
-
-config MACH_SMDK2413
- bool "SMDK2413"
- select CPU_S3C2412
- select MACH_S3C2413
- select MACH_SMDK
- help
- Say Y here if you are using an SMDK2413
-
config MACH_VR1000
bool "Thorcom VR1000"
select PM_SIMTEC if PM
@@ -120,202 +103,11 @@
help
Say Y here if you are using the Thorcom VR1000 board.
- This linux port is currently being maintained by Simtec, on behalf
- of Thorcom. Any queries, please contact Thorcom first.
-
-config MACH_RX3715
- bool "HP iPAQ rx3715"
- select CPU_S3C2440
- select PM_H1940 if PM
+config MACH_QT2410
+ bool "QT2410"
+ select CPU_S3C2410
help
- Say Y here if you are using the HP iPAQ rx3715.
-
- See <http://www.handhelds.org/projects/rx3715.html> for more
- information on this project
-
-config MACH_OTOM
- bool "NexVision OTOM Board"
- select CPU_S3C2410
- help
- Say Y here if you are using the Nex Vision OTOM board
-
-config MACH_NEXCODER_2440
- bool "NexVision NEXCODER 2440 Light Board"
- select CPU_S3C2440
- help
- Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board
-
-config MACH_VSTMS
- bool "VMSTMS"
- select CPU_S3C2412
- help
- Say Y here if you are using an VSTMS board
+ Say Y here if you are using the Armzone QT2410
endmenu
-config S3C2410_CLOCK
- bool
- help
- Clock code for the S3C2410, and similar processors
-
-config S3C2410_PM
- bool
- help
- Power Management code common to S3C2410 and better
-
-config CPU_S3C2410_DMA
- bool
- depends on S3C2410_DMA && (CPU_S3C2410 || CPU_S3C2442)
- default y if CPU_S3C2410 || CPU_S3C2442
- help
- DMA device selection for S3C2410 and compatible CPUs
-
-config CPU_S3C2410
- bool
- depends on ARCH_S3C2410
- select S3C2410_CLOCK
- select S3C2410_PM if PM
- help
- Support for S3C2410 and S3C2410A family from the S3C24XX line
- of Samsung Mobile CPUs.
-
-# internal node to signify if we are only dealing with an S3C2412
-
-config CPU_S3C2412_ONLY
- bool
- depends on ARCH_S3C2410 && !CPU_S3C2400 && !CPU_S3C2410 && \
- !CPU_S3C2440 && !CPU_S3C2442 && CPU_S3C2412
- default y if CPU_S3C2412
-
-config S3C2412_PM
- bool
- help
- Internal config node to apply S3C2412 power management
-
-config CPU_S3C2412
- bool
- depends on ARCH_S3C2410
- select S3C2412_PM if PM
- help
- Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line
-
-config CPU_S3C244X
- bool
- depends on ARCH_S3C2410 && (CPU_S3C2440 || CPU_S3C2442)
- help
- Support for S3C2440 and S3C2442 Samsung Mobile CPU based systems.
-
-config CPU_S3C2440
- bool
- depends on ARCH_S3C2410
- select S3C2410_CLOCK
- select S3C2410_PM if PM
- select CPU_S3C244X
- help
- Support for S3C2440 Samsung Mobile CPU based systems.
-
-config CPU_S3C2442
- bool
- depends on ARCH_S3C2420
- select S3C2410_CLOCK
- select S3C2410_PM if PM
- select CPU_S3C244X
- help
- Support for S3C2442 Samsung Mobile CPU based systems.
-
-comment "S3C2410 Boot"
-
-config S3C2410_BOOT_WATCHDOG
- bool "S3C2410 Initialisation watchdog"
- depends on ARCH_S3C2410 && S3C2410_WATCHDOG
- help
- Say y to enable the watchdog during the kernel decompression
- stage. If the kernel fails to uncompress, then the watchdog
- will trigger a reset and the system should restart.
-
- Although this uses the same hardware unit as the kernel watchdog
- driver, it is not a replacement for it. If you use this option,
- you will have to use the watchdg driver to either stop the timeout
- or restart it. If you do not, then your kernel will reboot after
- startup.
-
- The driver uses a fixed timeout value, so the exact time till the
- system resets depends on the value of PCLK. The timeout on an
- 200MHz s3c2410 should be about 30 seconds.
-
-config S3C2410_BOOT_ERROR_RESET
- bool "S3C2410 Reboot on decompression error"
- depends on ARCH_S3C2410
- help
- Say y here to use the watchdog to reset the system if the
- kernel decompressor detects an error during decompression.
-
-
-comment "S3C2410 Setup"
-
-config S3C2410_DMA
- bool "S3C2410 DMA support"
- depends on ARCH_S3C2410
- help
- S3C2410 DMA support. This is needed for drivers like sound which
- use the S3C2410's DMA system to move data to and from the
- peripheral blocks.
-
-config S3C2410_DMA_DEBUG
- bool "S3C2410 DMA support debug"
- depends on ARCH_S3C2410 && S3C2410_DMA
- help
- Enable debugging output for the DMA code. This option sends info
- to the kernel log, at priority KERN_DEBUG.
-
- Note, it is easy to create and fill the log buffer in a small
- amount of time, as well as using an significant percentage of
- the CPU time doing so.
-
-
-config S3C2410_PM_DEBUG
- bool "S3C2410 PM Suspend debug"
- depends on ARCH_S3C2410 && PM
- help
- Say Y here if you want verbose debugging from the PM Suspend and
- Resume code. See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
- for more information.
-
-config S3C2410_PM_CHECK
- bool "S3C2410 PM Suspend Memory CRC"
- depends on ARCH_S3C2410 && PM && CRC32
- help
- Enable the PM code's memory area checksum over sleep. This option
- will generate CRCs of all blocks of memory, and store them before
- going to sleep. The blocks are then checked on resume for any
- errors.
-
-config S3C2410_PM_CHECK_CHUNKSIZE
- int "S3C2410 PM Suspend CRC Chunksize (KiB)"
- depends on ARCH_S3C2410 && PM && S3C2410_PM_CHECK
- default 64
- help
- Set the chunksize in Kilobytes of the CRC for checking memory
- corruption over suspend and resume. A smaller value will mean that
- the CRC data block will take more memory, but wil identify any
- faults with better precision.
-
-config PM_SIMTEC
- bool
- help
- Common power management code for systems that are
- compatible with the Simtec style of power management
-
-config S3C2410_LOWLEVEL_UART_PORT
- int "S3C2410 UART to use for low-level messages"
- default 0
- help
- Choice of which UART port to use for the low-level messages,
- such as the `Uncompressing...` at start time. The value of
- this configuration should be between zero and two. The port
- must have been initialised by the boot-loader before use.
-
- Note, this does not affect the port used by the debug messages,
- which is a separate configuration.
-
-endif
diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile
index 27663e2..9a3d3d2 100644
--- a/arch/arm/mach-s3c2410/Makefile
+++ b/arch/arm/mach-s3c2410/Makefile
@@ -1,92 +1,31 @@
-
+# arch/arm/mach-s3c2410/Makefile
#
-# Makefile for the linux kernel.
+# Copyright 2007 Simtec Electronics
#
+# Licensed under GPLv2
-# Object file lists.
-
-obj-y := cpu.o irq.o time.o gpio.o clock.o devs.o
-obj-m :=
-obj-n :=
-obj- :=
-obj-dma-y :=
-obj-dma-n :=
-
-# DMA
-obj-$(CONFIG_S3C2410_DMA) += dma.o
-
-# S3C2400 support files
-obj-$(CONFIG_CPU_S3C2400) += s3c2400-gpio.o
-
-# S3C2410 support files
+obj-y :=
+obj-m :=
+obj-n :=
+obj- :=
obj-$(CONFIG_CPU_S3C2410) += s3c2410.o
-obj-$(CONFIG_CPU_S3C2410) += s3c2410-gpio.o
-obj-$(CONFIG_CPU_S3C2410) += s3c2410-irq.o
+obj-$(CONFIG_CPU_S3C2410) += irq.o
+obj-$(CONFIG_CPU_S3C2410_DMA) += dma.o
+obj-$(CONFIG_CPU_S3C2410_DMA) += dma.o
+obj-$(CONFIG_S3C2410_PM) += pm.o sleep.o
+obj-$(CONFIG_S3C2410_GPIO) += gpio.o
+obj-$(CONFIG_S3C2410_CLOCK) += clock.o
-obj-$(CONFIG_S3C2410_PM) += s3c2410-pm.o s3c2410-sleep.o
-obj-$(CONFIG_CPU_S3C2410_DMA) += s3c2410-dma.o
+# Machine support
-# Power Management support
-
-obj-$(CONFIG_PM) += pm.o sleep.o
-obj-$(CONFIG_PM_SIMTEC) += pm-simtec.o
-obj-$(CONFIG_PM_H1940) += pm-h1940.o
-
-# S3C2412 support
-obj-$(CONFIG_CPU_S3C2412) += s3c2412.o
-obj-$(CONFIG_CPU_S3C2412) += s3c2412-irq.o
-obj-$(CONFIG_CPU_S3C2412) += s3c2412-clock.o
-obj-dma-$(CONFIG_CPU_S3C2412) += s3c2412-dma.o
-
-obj-$(CONFIG_S3C2412_PM) += s3c2412-pm.o
-
-#
-# S3C244X support
-
-obj-$(CONFIG_CPU_S3C244X) += s3c244x.o
-obj-$(CONFIG_CPU_S3C244X) += s3c244x-irq.o
-
-# Clock control
-
-obj-$(CONFIG_S3C2410_CLOCK) += s3c2410-clock.o
-
-# S3C2440 support
-
-obj-$(CONFIG_CPU_S3C2440) += s3c2440.o s3c2440-dsc.o
-obj-$(CONFIG_CPU_S3C2440) += s3c2440-irq.o
-obj-$(CONFIG_CPU_S3C2440) += s3c2440-clock.o
-obj-$(CONFIG_CPU_S3C2440) += s3c2410-gpio.o
-obj-dma-$(CONFIG_CPU_S3C2440) += s3c2440-dma.o
-
-# S3C2442 support
-
-obj-$(CONFIG_CPU_S3C2442) += s3c2442.o
-obj-$(CONFIG_CPU_S3C2442) += s3c2442-clock.o
-
-# bast extras
-
-obj-$(CONFIG_BAST_PC104_IRQ) += bast-irq.o
-
-# merge in dma objects
-
-obj-y += $(obj-dma-y)
-
-# machine specific support
-
-obj-$(CONFIG_MACH_AML_M5900) += mach-amlm5900.o
-obj-$(CONFIG_MACH_ANUBIS) += mach-anubis.o
-obj-$(CONFIG_MACH_OSIRIS) += mach-osiris.o
-obj-$(CONFIG_ARCH_BAST) += mach-bast.o usb-simtec.o
-obj-$(CONFIG_ARCH_H1940) += mach-h1940.o
-obj-$(CONFIG_MACH_N30) += mach-n30.o
obj-$(CONFIG_ARCH_SMDK2410) += mach-smdk2410.o
-obj-$(CONFIG_MACH_SMDK2413) += mach-smdk2413.o
-obj-$(CONFIG_ARCH_S3C2440) += mach-smdk2440.o
-obj-$(CONFIG_MACH_VR1000) += mach-vr1000.o usb-simtec.o
-obj-$(CONFIG_MACH_RX3715) += mach-rx3715.o
+obj-$(CONFIG_ARCH_H1940) += mach-h1940.o
+obj-$(CONFIG_PM_H1940) += pm-h1940.o
+obj-$(CONFIG_MACH_N30) += mach-n30.o
+obj-$(CONFIG_ARCH_BAST) += mach-bast.o usb-simtec.o
obj-$(CONFIG_MACH_OTOM) += mach-otom.o
-obj-$(CONFIG_MACH_NEXCODER_2440) += mach-nexcoder.o
-obj-$(CONFIG_MACH_VSTMS) += mach-vstms.o
-
-obj-$(CONFIG_MACH_SMDK) += common-smdk.o
\ No newline at end of file
+obj-$(CONFIG_MACH_AML_M5900) += mach-amlm5900.o
+obj-$(CONFIG_BAST_PC104_IRQ) += bast-irq.o
+obj-$(CONFIG_MACH_VR1000) += mach-vr1000.o usb-simtec.o
+obj-$(CONFIG_MACH_QT2410) += mach-qt2410.o
diff --git a/arch/arm/mach-s3c2410/bast-irq.c b/arch/arm/mach-s3c2410/bast-irq.c
index 379efe7..daeba42 100644
--- a/arch/arm/mach-s3c2410/bast-irq.c
+++ b/arch/arm/mach-s3c2410/bast-irq.c
@@ -39,7 +39,7 @@
#include <asm/arch/bast-map.h>
#include <asm/arch/bast-irq.h>
-#include "irq.h"
+#include <asm/plat-s3c24xx/irq.h>
#if 0
#include <asm/debug-ll.h>
diff --git a/arch/arm/mach-s3c2410/bast.h b/arch/arm/mach-s3c2410/bast.h
index e5d0331..e985437 100644
--- a/arch/arm/mach-s3c2410/bast.h
+++ b/arch/arm/mach-s3c2410/bast.h
@@ -1,2 +1,2 @@
-
+/* linux/arch/arm/mach-s3c2410/bast.h
extern void bast_init_irq(void);
diff --git a/arch/arm/mach-s3c2410/clock.c b/arch/arm/mach-s3c2410/clock.c
index e13fb67..5b4831c 100644
--- a/arch/arm/mach-s3c2410/clock.c
+++ b/arch/arm/mach-s3c2410/clock.c
@@ -1,15 +1,9 @@
/* linux/arch/arm/mach-s3c2410/clock.c
*
- * Copyright (c) 2004-2005 Simtec Electronics
+ * Copyright (c) 2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
- * S3C24XX Core clock control support
- *
- * Based on, and code from linux/arch/arm/mach-versatile/clock.c
- **
- ** Copyright (C) 2004 ARM Limited.
- ** Written by Deep Blue Solutions Limited.
- *
+ * S3C2410,S3C2440,S3C2442 Clock control support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -32,418 +26,251 @@
#include <linux/list.h>
#include <linux/errno.h>
#include <linux/err.h>
-#include <linux/platform_device.h>
#include <linux/sysdev.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
#include <linux/clk.h>
#include <linux/mutex.h>
#include <linux/delay.h>
+#include <linux/serial_core.h>
+
+#include <asm/mach/map.h>
#include <asm/hardware.h>
-#include <asm/irq.h>
#include <asm/io.h>
+#include <asm/arch/regs-serial.h>
#include <asm/arch/regs-clock.h>
#include <asm/arch/regs-gpio.h>
-#include "clock.h"
-#include "cpu.h"
+#include <asm/plat-s3c24xx/s3c2410.h>
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/cpu.h>
-/* clock information */
-
-static LIST_HEAD(clocks);
-
-DEFINE_MUTEX(clocks_mutex);
-
-/* enable and disable calls for use with the clk struct */
-
-static int clk_null_enable(struct clk *clk, int enable)
+int s3c2410_clkcon_enable(struct clk *clk, int enable)
{
- return 0;
-}
+ unsigned int clocks = clk->ctrlbit;
+ unsigned long clkcon;
-/* Clock API calls */
-
-struct clk *clk_get(struct device *dev, const char *id)
-{
- struct clk *p;
- struct clk *clk = ERR_PTR(-ENOENT);
- int idno;
-
- if (dev == NULL || dev->bus != &platform_bus_type)
- idno = -1;
- else
- idno = to_platform_device(dev)->id;
-
- mutex_lock(&clocks_mutex);
-
- list_for_each_entry(p, &clocks, list) {
- if (p->id == idno &&
- strcmp(id, p->name) == 0 &&
- try_module_get(p->owner)) {
- clk = p;
- break;
- }
- }
-
- /* check for the case where a device was supplied, but the
- * clock that was being searched for is not device specific */
-
- if (IS_ERR(clk)) {
- list_for_each_entry(p, &clocks, list) {
- if (p->id == -1 && strcmp(id, p->name) == 0 &&
- try_module_get(p->owner)) {
- clk = p;
- break;
- }
- }
- }
-
- mutex_unlock(&clocks_mutex);
- return clk;
-}
-
-void clk_put(struct clk *clk)
-{
- module_put(clk->owner);
-}
-
-int clk_enable(struct clk *clk)
-{
- if (IS_ERR(clk) || clk == NULL)
- return -EINVAL;
-
- clk_enable(clk->parent);
-
- mutex_lock(&clocks_mutex);
-
- if ((clk->usage++) == 0)
- (clk->enable)(clk, 1);
-
- mutex_unlock(&clocks_mutex);
- return 0;
-}
-
-void clk_disable(struct clk *clk)
-{
- if (IS_ERR(clk) || clk == NULL)
- return;
-
- mutex_lock(&clocks_mutex);
-
- if ((--clk->usage) == 0)
- (clk->enable)(clk, 0);
-
- mutex_unlock(&clocks_mutex);
- clk_disable(clk->parent);
-}
-
-
-unsigned long clk_get_rate(struct clk *clk)
-{
- if (IS_ERR(clk))
- return 0;
-
- if (clk->rate != 0)
- return clk->rate;
-
- if (clk->get_rate != NULL)
- return (clk->get_rate)(clk);
-
- if (clk->parent != NULL)
- return clk_get_rate(clk->parent);
-
- return clk->rate;
-}
-
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
- if (!IS_ERR(clk) && clk->round_rate)
- return (clk->round_rate)(clk, rate);
-
- return rate;
-}
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
- int ret;
-
- if (IS_ERR(clk))
- return -EINVAL;
-
- mutex_lock(&clocks_mutex);
- ret = (clk->set_rate)(clk, rate);
- mutex_unlock(&clocks_mutex);
-
- return ret;
-}
-
-struct clk *clk_get_parent(struct clk *clk)
-{
- return clk->parent;
-}
-
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
- int ret = 0;
-
- if (IS_ERR(clk))
- return -EINVAL;
-
- mutex_lock(&clocks_mutex);
-
- if (clk->set_parent)
- ret = (clk->set_parent)(clk, parent);
-
- mutex_unlock(&clocks_mutex);
-
- return ret;
-}
-
-EXPORT_SYMBOL(clk_get);
-EXPORT_SYMBOL(clk_put);
-EXPORT_SYMBOL(clk_enable);
-EXPORT_SYMBOL(clk_disable);
-EXPORT_SYMBOL(clk_get_rate);
-EXPORT_SYMBOL(clk_round_rate);
-EXPORT_SYMBOL(clk_set_rate);
-EXPORT_SYMBOL(clk_get_parent);
-EXPORT_SYMBOL(clk_set_parent);
-
-/* base clocks */
-
-struct clk clk_xtal = {
- .name = "xtal",
- .id = -1,
- .rate = 0,
- .parent = NULL,
- .ctrlbit = 0,
-};
-
-struct clk clk_mpll = {
- .name = "mpll",
- .id = -1,
-};
-
-struct clk clk_upll = {
- .name = "upll",
- .id = -1,
- .parent = NULL,
- .ctrlbit = 0,
-};
-
-struct clk clk_f = {
- .name = "fclk",
- .id = -1,
- .rate = 0,
- .parent = &clk_mpll,
- .ctrlbit = 0,
-};
-
-struct clk clk_h = {
- .name = "hclk",
- .id = -1,
- .rate = 0,
- .parent = NULL,
- .ctrlbit = 0,
-};
-
-struct clk clk_p = {
- .name = "pclk",
- .id = -1,
- .rate = 0,
- .parent = NULL,
- .ctrlbit = 0,
-};
-
-struct clk clk_usb_bus = {
- .name = "usb-bus",
- .id = -1,
- .rate = 0,
- .parent = &clk_upll,
-};
-
-/* clocks that could be registered by external code */
-
-static int s3c24xx_dclk_enable(struct clk *clk, int enable)
-{
- unsigned long dclkcon = __raw_readl(S3C24XX_DCLKCON);
+ clkcon = __raw_readl(S3C2410_CLKCON);
if (enable)
- dclkcon |= clk->ctrlbit;
+ clkcon |= clocks;
else
- dclkcon &= ~clk->ctrlbit;
+ clkcon &= ~clocks;
- __raw_writel(dclkcon, S3C24XX_DCLKCON);
+ /* ensure none of the special function bits set */
+ clkcon &= ~(S3C2410_CLKCON_IDLE|S3C2410_CLKCON_POWER);
+
+ __raw_writel(clkcon, S3C2410_CLKCON);
return 0;
}
-static int s3c24xx_dclk_setparent(struct clk *clk, struct clk *parent)
+static int s3c2410_upll_enable(struct clk *clk, int enable)
{
- unsigned long dclkcon;
- unsigned int uclk;
+ unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW);
+ unsigned long orig = clkslow;
- if (parent == &clk_upll)
- uclk = 1;
- else if (parent == &clk_p)
- uclk = 0;
+ if (enable)
+ clkslow &= ~S3C2410_CLKSLOW_UCLK_OFF;
else
- return -EINVAL;
+ clkslow |= S3C2410_CLKSLOW_UCLK_OFF;
- clk->parent = parent;
+ __raw_writel(clkslow, S3C2410_CLKSLOW);
- dclkcon = __raw_readl(S3C24XX_DCLKCON);
+ /* if we started the UPLL, then allow to settle */
- if (clk->ctrlbit == S3C2410_DCLKCON_DCLK0EN) {
- if (uclk)
- dclkcon |= S3C2410_DCLKCON_DCLK0_UCLK;
- else
- dclkcon &= ~S3C2410_DCLKCON_DCLK0_UCLK;
- } else {
- if (uclk)
- dclkcon |= S3C2410_DCLKCON_DCLK1_UCLK;
- else
- dclkcon &= ~S3C2410_DCLKCON_DCLK1_UCLK;
+ if (enable && (orig & S3C2410_CLKSLOW_UCLK_OFF))
+ udelay(200);
+
+ return 0;
+}
+
+/* standard clock definitions */
+
+static struct clk init_clocks_disable[] = {
+ {
+ .name = "nand",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s3c2410_clkcon_enable,
+ .ctrlbit = S3C2410_CLKCON_NAND,
+ }, {
+ .name = "sdi",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s3c2410_clkcon_enable,
+ .ctrlbit = S3C2410_CLKCON_SDI,
+ }, {
+ .name = "adc",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s3c2410_clkcon_enable,
+ .ctrlbit = S3C2410_CLKCON_ADC,
+ }, {
+ .name = "i2c",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s3c2410_clkcon_enable,
+ .ctrlbit = S3C2410_CLKCON_IIC,
+ }, {
+ .name = "iis",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s3c2410_clkcon_enable,
+ .ctrlbit = S3C2410_CLKCON_IIS,
+ }, {
+ .name = "spi",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s3c2410_clkcon_enable,
+ .ctrlbit = S3C2410_CLKCON_SPI,
+ }
+};
+
+static struct clk init_clocks[] = {
+ {
+ .name = "lcd",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s3c2410_clkcon_enable,
+ .ctrlbit = S3C2410_CLKCON_LCDC,
+ }, {
+ .name = "gpio",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s3c2410_clkcon_enable,
+ .ctrlbit = S3C2410_CLKCON_GPIO,
+ }, {
+ .name = "usb-host",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s3c2410_clkcon_enable,
+ .ctrlbit = S3C2410_CLKCON_USBH,
+ }, {
+ .name = "usb-device",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s3c2410_clkcon_enable,
+ .ctrlbit = S3C2410_CLKCON_USBD,
+ }, {
+ .name = "timers",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s3c2410_clkcon_enable,
+ .ctrlbit = S3C2410_CLKCON_PWMT,
+ }, {
+ .name = "uart",
+ .id = 0,
+ .parent = &clk_p,
+ .enable = s3c2410_clkcon_enable,
+ .ctrlbit = S3C2410_CLKCON_UART0,
+ }, {
+ .name = "uart",
+ .id = 1,
+ .parent = &clk_p,
+ .enable = s3c2410_clkcon_enable,
+ .ctrlbit = S3C2410_CLKCON_UART1,
+ }, {
+ .name = "uart",
+ .id = 2,
+ .parent = &clk_p,
+ .enable = s3c2410_clkcon_enable,
+ .ctrlbit = S3C2410_CLKCON_UART2,
+ }, {
+ .name = "rtc",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s3c2410_clkcon_enable,
+ .ctrlbit = S3C2410_CLKCON_RTC,
+ }, {
+ .name = "watchdog",
+ .id = -1,
+ .parent = &clk_p,
+ .ctrlbit = 0,
+ }, {
+ .name = "usb-bus-host",
+ .id = -1,
+ .parent = &clk_usb_bus,
+ }, {
+ .name = "usb-bus-gadget",
+ .id = -1,
+ .parent = &clk_usb_bus,
+ },
+};
+
+/* s3c2410_baseclk_add()
+ *
+ * Add all the clocks used by the s3c2410 or compatible CPUs
+ * such as the S3C2440 and S3C2442.
+ *
+ * We cannot use a system device as we are needed before any
+ * of the init-calls that initialise the devices are actually
+ * done.
+*/
+
+int __init s3c2410_baseclk_add(void)
+{
+ unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW);
+ unsigned long clkcon = __raw_readl(S3C2410_CLKCON);
+ struct clk *clkp;
+ struct clk *xtal;
+ int ret;
+ int ptr;
+
+ clk_upll.enable = s3c2410_upll_enable;
+
+ if (s3c24xx_register_clock(&clk_usb_bus) < 0)
+ printk(KERN_ERR "failed to register usb bus clock\n");
+
+ /* register clocks from clock array */
+
+ clkp = init_clocks;
+ for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) {
+ /* ensure that we note the clock state */
+
+ clkp->usage = clkcon & clkp->ctrlbit ? 1 : 0;
+
+ ret = s3c24xx_register_clock(clkp);
+ if (ret < 0) {
+ printk(KERN_ERR "Failed to register clock %s (%d)\n",
+ clkp->name, ret);
+ }
}
- __raw_writel(dclkcon, S3C24XX_DCLKCON);
+ /* We must be careful disabling the clocks we are not intending to
+ * be using at boot time, as subsytems such as the LCD which do
+ * their own DMA requests to the bus can cause the system to lockup
+ * if they where in the middle of requesting bus access.
+ *
+ * Disabling the LCD clock if the LCD is active is very dangerous,
+ * and therefore the bootloader should be careful to not enable
+ * the LCD clock if it is not needed.
+ */
- return 0;
-}
+ /* install (and disable) the clocks we do not need immediately */
+ clkp = init_clocks_disable;
+ for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
-static int s3c24xx_clkout_setparent(struct clk *clk, struct clk *parent)
-{
- unsigned long mask;
- unsigned long source;
+ ret = s3c24xx_register_clock(clkp);
+ if (ret < 0) {
+ printk(KERN_ERR "Failed to register clock %s (%d)\n",
+ clkp->name, ret);
+ }
- /* calculate the MISCCR setting for the clock */
-
- if (parent == &clk_xtal)
- source = S3C2410_MISCCR_CLK0_MPLL;
- else if (parent == &clk_upll)
- source = S3C2410_MISCCR_CLK0_UPLL;
- else if (parent == &clk_f)
- source = S3C2410_MISCCR_CLK0_FCLK;
- else if (parent == &clk_h)
- source = S3C2410_MISCCR_CLK0_HCLK;
- else if (parent == &clk_p)
- source = S3C2410_MISCCR_CLK0_PCLK;
- else if (clk == &s3c24xx_clkout0 && parent == &s3c24xx_dclk0)
- source = S3C2410_MISCCR_CLK0_DCLK0;
- else if (clk == &s3c24xx_clkout1 && parent == &s3c24xx_dclk1)
- source = S3C2410_MISCCR_CLK0_DCLK0;
- else
- return -EINVAL;
-
- clk->parent = parent;
-
- if (clk == &s3c24xx_dclk0)
- mask = S3C2410_MISCCR_CLK0_MASK;
- else {
- source <<= 4;
- mask = S3C2410_MISCCR_CLK1_MASK;
+ s3c2410_clkcon_enable(clkp, 0);
}
- s3c2410_modify_misccr(mask, source);
- return 0;
-}
+ /* show the clock-slow value */
-/* external clock definitions */
+ xtal = clk_get(NULL, "xtal");
-struct clk s3c24xx_dclk0 = {
- .name = "dclk0",
- .id = -1,
- .ctrlbit = S3C2410_DCLKCON_DCLK0EN,
- .enable = s3c24xx_dclk_enable,
- .set_parent = s3c24xx_dclk_setparent,
-};
-
-struct clk s3c24xx_dclk1 = {
- .name = "dclk1",
- .id = -1,
- .ctrlbit = S3C2410_DCLKCON_DCLK0EN,
- .enable = s3c24xx_dclk_enable,
- .set_parent = s3c24xx_dclk_setparent,
-};
-
-struct clk s3c24xx_clkout0 = {
- .name = "clkout0",
- .id = -1,
- .set_parent = s3c24xx_clkout_setparent,
-};
-
-struct clk s3c24xx_clkout1 = {
- .name = "clkout1",
- .id = -1,
- .set_parent = s3c24xx_clkout_setparent,
-};
-
-struct clk s3c24xx_uclk = {
- .name = "uclk",
- .id = -1,
-};
-
-/* initialise the clock system */
-
-int s3c24xx_register_clock(struct clk *clk)
-{
- clk->owner = THIS_MODULE;
-
- if (clk->enable == NULL)
- clk->enable = clk_null_enable;
-
- /* add to the list of available clocks */
-
- mutex_lock(&clocks_mutex);
- list_add(&clk->list, &clocks);
- mutex_unlock(&clocks_mutex);
-
- return 0;
-}
-
-/* initalise all the clocks */
-
-int __init s3c24xx_setup_clocks(unsigned long xtal,
- unsigned long fclk,
- unsigned long hclk,
- unsigned long pclk)
-{
- printk(KERN_INFO "S3C24XX Clocks, (c) 2004 Simtec Electronics\n");
-
- /* initialise the main system clocks */
-
- clk_xtal.rate = xtal;
- clk_upll.rate = s3c2410_get_pll(__raw_readl(S3C2410_UPLLCON), xtal);
-
- clk_mpll.rate = fclk;
- clk_h.rate = hclk;
- clk_p.rate = pclk;
- clk_f.rate = fclk;
-
- /* assume uart clocks are correctly setup */
-
- /* register our clocks */
-
- if (s3c24xx_register_clock(&clk_xtal) < 0)
- printk(KERN_ERR "failed to register master xtal\n");
-
- if (s3c24xx_register_clock(&clk_mpll) < 0)
- printk(KERN_ERR "failed to register mpll clock\n");
-
- if (s3c24xx_register_clock(&clk_upll) < 0)
- printk(KERN_ERR "failed to register upll clock\n");
-
- if (s3c24xx_register_clock(&clk_f) < 0)
- printk(KERN_ERR "failed to register cpu fclk\n");
-
- if (s3c24xx_register_clock(&clk_h) < 0)
- printk(KERN_ERR "failed to register cpu hclk\n");
-
- if (s3c24xx_register_clock(&clk_p) < 0)
- printk(KERN_ERR "failed to register cpu pclk\n");
+ printk("CLOCK: Slow mode (%ld.%ld MHz), %s, MPLL %s, UPLL %s\n",
+ print_mhz(clk_get_rate(xtal) /
+ ( 2 * S3C2410_CLKSLOW_GET_SLOWVAL(clkslow))),
+ (clkslow & S3C2410_CLKSLOW_SLOW) ? "slow" : "fast",
+ (clkslow & S3C2410_CLKSLOW_MPLL_OFF) ? "off" : "on",
+ (clkslow & S3C2410_CLKSLOW_UCLK_OFF) ? "off" : "on");
return 0;
}
diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c
index fa860e7..67d1ad3 100644
--- a/arch/arm/mach-s3c2410/dma.c
+++ b/arch/arm/mach-s3c2410/dma.c
@@ -1,9 +1,9 @@
/* linux/arch/arm/mach-s3c2410/dma.c
*
- * Copyright (c) 2003-2005,2006 Simtec Electronics
+ * Copyright (c) 2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
- * S3C2410 DMA core
+ * S3C2410 DMA selection
*
* http://armlinux.simtec.co.uk/
*
@@ -12,1430 +12,170 @@
* published by the Free Software Foundation.
*/
-
-#ifdef CONFIG_S3C2410_DMA_DEBUG
-#define DEBUG
-#endif
-
-#include <linux/module.h>
+#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/spinlock.h>
-#include <linux/interrupt.h>
#include <linux/sysdev.h>
-#include <linux/slab.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
+#include <linux/serial_core.h>
-#include <asm/system.h>
-#include <asm/irq.h>
-#include <asm/hardware.h>
-#include <asm/io.h>
#include <asm/dma.h>
+#include <asm/arch/dma.h>
-#include <asm/mach/dma.h>
-#include <asm/arch/map.h>
+#include <asm/plat-s3c24xx/cpu.h>
+#include <asm/plat-s3c24xx/dma.h>
-#include "dma.h"
+#include <asm/arch/regs-serial.h>
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-ac97.h>
+#include <asm/arch/regs-mem.h>
+#include <asm/arch/regs-lcd.h>
+#include <asm/arch/regs-sdi.h>
+#include <asm/arch/regs-iis.h>
+#include <asm/arch/regs-spi.h>
-/* io map for dma */
-static void __iomem *dma_base;
-static struct kmem_cache *dma_kmem;
-
-struct s3c24xx_dma_selection dma_sel;
-
-/* dma channel state information */
-struct s3c2410_dma_chan s3c2410_chans[S3C2410_DMA_CHANNELS];
-
-/* debugging functions */
-
-#define BUF_MAGIC (0xcafebabe)
-
-#define dmawarn(fmt...) printk(KERN_DEBUG fmt)
-
-#define dma_regaddr(chan, reg) ((chan)->regs + (reg))
-
-#if 1
-#define dma_wrreg(chan, reg, val) writel((val), (chan)->regs + (reg))
-#else
-static inline void
-dma_wrreg(struct s3c2410_dma_chan *chan, int reg, unsigned long val)
-{
- pr_debug("writing %08x to register %08x\n",(unsigned int)val,reg);
- writel(val, dma_regaddr(chan, reg));
-}
-#endif
-
-#define dma_rdreg(chan, reg) readl((chan)->regs + (reg))
-
-/* captured register state for debug */
-
-struct s3c2410_dma_regstate {
- unsigned long dcsrc;
- unsigned long disrc;
- unsigned long dstat;
- unsigned long dcon;
- unsigned long dmsktrig;
+static struct s3c24xx_dma_map __initdata s3c2410_dma_mappings[] = {
+ [DMACH_XD0] = {
+ .name = "xdreq0",
+ .channels[0] = S3C2410_DCON_CH0_XDREQ0 | DMA_CH_VALID,
+ },
+ [DMACH_XD1] = {
+ .name = "xdreq1",
+ .channels[1] = S3C2410_DCON_CH1_XDREQ1 | DMA_CH_VALID,
+ },
+ [DMACH_SDI] = {
+ .name = "sdi",
+ .channels[0] = S3C2410_DCON_CH0_SDI | DMA_CH_VALID,
+ .channels[2] = S3C2410_DCON_CH2_SDI | DMA_CH_VALID,
+ .channels[3] = S3C2410_DCON_CH3_SDI | DMA_CH_VALID,
+ .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO,
+ .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO,
+ },
+ [DMACH_SPI0] = {
+ .name = "spi0",
+ .channels[1] = S3C2410_DCON_CH1_SPI | DMA_CH_VALID,
+ .hw_addr.to = S3C2410_PA_SPI + S3C2410_SPTDAT,
+ .hw_addr.from = S3C2410_PA_SPI + S3C2410_SPRDAT,
+ },
+ [DMACH_SPI1] = {
+ .name = "spi1",
+ .channels[3] = S3C2410_DCON_CH3_SPI | DMA_CH_VALID,
+ .hw_addr.to = S3C2410_PA_SPI + 0x20 + S3C2410_SPTDAT,
+ .hw_addr.from = S3C2410_PA_SPI + 0x20 + S3C2410_SPRDAT,
+ },
+ [DMACH_UART0] = {
+ .name = "uart0",
+ .channels[0] = S3C2410_DCON_CH0_UART0 | DMA_CH_VALID,
+ .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH,
+ .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH,
+ },
+ [DMACH_UART1] = {
+ .name = "uart1",
+ .channels[1] = S3C2410_DCON_CH1_UART1 | DMA_CH_VALID,
+ .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH,
+ .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH,
+ },
+ [DMACH_UART2] = {
+ .name = "uart2",
+ .channels[3] = S3C2410_DCON_CH3_UART2 | DMA_CH_VALID,
+ .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH,
+ .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH,
+ },
+ [DMACH_TIMER] = {
+ .name = "timer",
+ .channels[0] = S3C2410_DCON_CH0_TIMER | DMA_CH_VALID,
+ .channels[2] = S3C2410_DCON_CH2_TIMER | DMA_CH_VALID,
+ .channels[3] = S3C2410_DCON_CH3_TIMER | DMA_CH_VALID,
+ },
+ [DMACH_I2S_IN] = {
+ .name = "i2s-sdi",
+ .channels[1] = S3C2410_DCON_CH1_I2SSDI | DMA_CH_VALID,
+ .channels[2] = S3C2410_DCON_CH2_I2SSDI | DMA_CH_VALID,
+ .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO,
+ },
+ [DMACH_I2S_OUT] = {
+ .name = "i2s-sdo",
+ .channels[2] = S3C2410_DCON_CH2_I2SSDO | DMA_CH_VALID,
+ .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO,
+ },
+ [DMACH_USB_EP1] = {
+ .name = "usb-ep1",
+ .channels[0] = S3C2410_DCON_CH0_USBEP1 | DMA_CH_VALID,
+ },
+ [DMACH_USB_EP2] = {
+ .name = "usb-ep2",
+ .channels[1] = S3C2410_DCON_CH1_USBEP2 | DMA_CH_VALID,
+ },
+ [DMACH_USB_EP3] = {
+ .name = "usb-ep3",
+ .channels[2] = S3C2410_DCON_CH2_USBEP3 | DMA_CH_VALID,
+ },
+ [DMACH_USB_EP4] = {
+ .name = "usb-ep4",
+ .channels[3] =S3C2410_DCON_CH3_USBEP4 | DMA_CH_VALID,
+ },
};
-#ifdef CONFIG_S3C2410_DMA_DEBUG
-
-/* dmadbg_showregs
- *
- * simple debug routine to print the current state of the dma registers
-*/
-
-static void
-dmadbg_capture(struct s3c2410_dma_chan *chan, struct s3c2410_dma_regstate *regs)
+static void s3c2410_dma_select(struct s3c2410_dma_chan *chan,
+ struct s3c24xx_dma_map *map)
{
- regs->dcsrc = dma_rdreg(chan, S3C2410_DMA_DCSRC);
- regs->disrc = dma_rdreg(chan, S3C2410_DMA_DISRC);
- regs->dstat = dma_rdreg(chan, S3C2410_DMA_DSTAT);
- regs->dcon = dma_rdreg(chan, S3C2410_DMA_DCON);
- regs->dmsktrig = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG);
+ chan->dcon = map->channels[chan->number] & ~DMA_CH_VALID;
}
-static void
-dmadbg_dumpregs(const char *fname, int line, struct s3c2410_dma_chan *chan,
- struct s3c2410_dma_regstate *regs)
-{
- printk(KERN_DEBUG "dma%d: %s:%d: DCSRC=%08lx, DISRC=%08lx, DSTAT=%08lx DMT=%02lx, DCON=%08lx\n",
- chan->number, fname, line,
- regs->dcsrc, regs->disrc, regs->dstat, regs->dmsktrig,
- regs->dcon);
-}
-
-static void
-dmadbg_showchan(const char *fname, int line, struct s3c2410_dma_chan *chan)
-{
- struct s3c2410_dma_regstate state;
-
- dmadbg_capture(chan, &state);
-
- printk(KERN_DEBUG "dma%d: %s:%d: ls=%d, cur=%p, %p %p\n",
- chan->number, fname, line, chan->load_state,
- chan->curr, chan->next, chan->end);
-
- dmadbg_dumpregs(fname, line, chan, &state);
-}
-
-static void
-dmadbg_showregs(const char *fname, int line, struct s3c2410_dma_chan *chan)
-{
- struct s3c2410_dma_regstate state;
-
- dmadbg_capture(chan, &state);
- dmadbg_dumpregs(fname, line, chan, &state);
-}
-
-#define dbg_showregs(chan) dmadbg_showregs(__FUNCTION__, __LINE__, (chan))
-#define dbg_showchan(chan) dmadbg_showchan(__FUNCTION__, __LINE__, (chan))
-#else
-#define dbg_showregs(chan) do { } while(0)
-#define dbg_showchan(chan) do { } while(0)
-#endif /* CONFIG_S3C2410_DMA_DEBUG */
-
-static struct s3c2410_dma_chan *dma_chan_map[DMACH_MAX];
-
-/* lookup_dma_channel
- *
- * change the dma channel number given into a real dma channel id
-*/
-
-static struct s3c2410_dma_chan *lookup_dma_channel(unsigned int channel)
-{
- if (channel & DMACH_LOW_LEVEL)
- return &s3c2410_chans[channel & ~DMACH_LOW_LEVEL];
- else
- return dma_chan_map[channel];
-}
-
-/* s3c2410_dma_stats_timeout
- *
- * Update DMA stats from timeout info
-*/
-
-static void
-s3c2410_dma_stats_timeout(struct s3c2410_dma_stats *stats, int val)
-{
- if (stats == NULL)
- return;
-
- if (val > stats->timeout_longest)
- stats->timeout_longest = val;
- if (val < stats->timeout_shortest)
- stats->timeout_shortest = val;
-
- stats->timeout_avg += val;
-}
-
-/* s3c2410_dma_waitforload
- *
- * wait for the DMA engine to load a buffer, and update the state accordingly
-*/
-
-static int
-s3c2410_dma_waitforload(struct s3c2410_dma_chan *chan, int line)
-{
- int timeout = chan->load_timeout;
- int took;
-
- if (chan->load_state != S3C2410_DMALOAD_1LOADED) {
- printk(KERN_ERR "dma%d: s3c2410_dma_waitforload() called in loadstate %d from line %d\n", chan->number, chan->load_state, line);
- return 0;
- }
-
- if (chan->stats != NULL)
- chan->stats->loads++;
-
- while (--timeout > 0) {
- if ((dma_rdreg(chan, S3C2410_DMA_DSTAT) << (32-20)) != 0) {
- took = chan->load_timeout - timeout;
-
- s3c2410_dma_stats_timeout(chan->stats, took);
-
- switch (chan->load_state) {
- case S3C2410_DMALOAD_1LOADED:
- chan->load_state = S3C2410_DMALOAD_1RUNNING;
- break;
-
- default:
- printk(KERN_ERR "dma%d: unknown load_state in s3c2410_dma_waitforload() %d\n", chan->number, chan->load_state);
- }
-
- return 1;
- }
- }
-
- if (chan->stats != NULL) {
- chan->stats->timeout_failed++;
- }
-
- return 0;
-}
-
-
-
-/* s3c2410_dma_loadbuffer
- *
- * load a buffer, and update the channel state
-*/
-
-static inline int
-s3c2410_dma_loadbuffer(struct s3c2410_dma_chan *chan,
- struct s3c2410_dma_buf *buf)
-{
- unsigned long reload;
-
- pr_debug("s3c2410_chan_loadbuffer: loading buff %p (0x%08lx,0x%06x)\n",
- buf, (unsigned long)buf->data, buf->size);
-
- if (buf == NULL) {
- dmawarn("buffer is NULL\n");
- return -EINVAL;
- }
-
- /* check the state of the channel before we do anything */
-
- if (chan->load_state == S3C2410_DMALOAD_1LOADED) {
- dmawarn("load_state is S3C2410_DMALOAD_1LOADED\n");
- }
-
- if (chan->load_state == S3C2410_DMALOAD_1LOADED_1RUNNING) {
- dmawarn("state is S3C2410_DMALOAD_1LOADED_1RUNNING\n");
- }
-
- /* it would seem sensible if we are the last buffer to not bother
- * with the auto-reload bit, so that the DMA engine will not try
- * and load another transfer after this one has finished...
- */
- if (chan->load_state == S3C2410_DMALOAD_NONE) {
- pr_debug("load_state is none, checking for noreload (next=%p)\n",
- buf->next);
- reload = (buf->next == NULL) ? S3C2410_DCON_NORELOAD : 0;
- } else {
- //pr_debug("load_state is %d => autoreload\n", chan->load_state);
- reload = S3C2410_DCON_AUTORELOAD;
- }
-
- if ((buf->data & 0xf0000000) != 0x30000000) {
- dmawarn("dmaload: buffer is %p\n", (void *)buf->data);
- }
-
- writel(buf->data, chan->addr_reg);
-
- dma_wrreg(chan, S3C2410_DMA_DCON,
- chan->dcon | reload | (buf->size/chan->xfer_unit));
-
- chan->next = buf->next;
-
- /* update the state of the channel */
-
- switch (chan->load_state) {
- case S3C2410_DMALOAD_NONE:
- chan->load_state = S3C2410_DMALOAD_1LOADED;
- break;
-
- case S3C2410_DMALOAD_1RUNNING:
- chan->load_state = S3C2410_DMALOAD_1LOADED_1RUNNING;
- break;
-
- default:
- dmawarn("dmaload: unknown state %d in loadbuffer\n",
- chan->load_state);
- break;
- }
-
- return 0;
-}
-
-/* s3c2410_dma_call_op
- *
- * small routine to call the op routine with the given op if it has been
- * registered
-*/
-
-static void
-s3c2410_dma_call_op(struct s3c2410_dma_chan *chan, enum s3c2410_chan_op op)
-{
- if (chan->op_fn != NULL) {
- (chan->op_fn)(chan, op);
- }
-}
-
-/* s3c2410_dma_buffdone
- *
- * small wrapper to check if callback routine needs to be called, and
- * if so, call it
-*/
-
-static inline void
-s3c2410_dma_buffdone(struct s3c2410_dma_chan *chan, struct s3c2410_dma_buf *buf,
- enum s3c2410_dma_buffresult result)
-{
-#if 0
- pr_debug("callback_fn=%p, buf=%p, id=%p, size=%d, result=%d\n",
- chan->callback_fn, buf, buf->id, buf->size, result);
-#endif
-
- if (chan->callback_fn != NULL) {
- (chan->callback_fn)(chan, buf->id, buf->size, result);
- }
-}
-
-/* s3c2410_dma_start
- *
- * start a dma channel going
-*/
-
-static int s3c2410_dma_start(struct s3c2410_dma_chan *chan)
-{
- unsigned long tmp;
- unsigned long flags;
-
- pr_debug("s3c2410_start_dma: channel=%d\n", chan->number);
-
- local_irq_save(flags);
-
- if (chan->state == S3C2410_DMA_RUNNING) {
- pr_debug("s3c2410_start_dma: already running (%d)\n", chan->state);
- local_irq_restore(flags);
- return 0;
- }
-
- chan->state = S3C2410_DMA_RUNNING;
-
- /* check wether there is anything to load, and if not, see
- * if we can find anything to load
- */
-
- if (chan->load_state == S3C2410_DMALOAD_NONE) {
- if (chan->next == NULL) {
- printk(KERN_ERR "dma%d: channel has nothing loaded\n",
- chan->number);
- chan->state = S3C2410_DMA_IDLE;
- local_irq_restore(flags);
- return -EINVAL;
- }
-
- s3c2410_dma_loadbuffer(chan, chan->next);
- }
-
- dbg_showchan(chan);
-
- /* enable the channel */
-
- if (!chan->irq_enabled) {
- enable_irq(chan->irq);
- chan->irq_enabled = 1;
- }
-
- /* start the channel going */
-
- tmp = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG);
- tmp &= ~S3C2410_DMASKTRIG_STOP;
- tmp |= S3C2410_DMASKTRIG_ON;
- dma_wrreg(chan, S3C2410_DMA_DMASKTRIG, tmp);
-
- pr_debug("dma%d: %08lx to DMASKTRIG\n", chan->number, tmp);
-
-#if 0
- /* the dma buffer loads should take care of clearing the AUTO
- * reloading feature */
- tmp = dma_rdreg(chan, S3C2410_DMA_DCON);
- tmp &= ~S3C2410_DCON_NORELOAD;
- dma_wrreg(chan, S3C2410_DMA_DCON, tmp);
-#endif
-
- s3c2410_dma_call_op(chan, S3C2410_DMAOP_START);
-
- dbg_showchan(chan);
-
- /* if we've only loaded one buffer onto the channel, then chec
- * to see if we have another, and if so, try and load it so when
- * the first buffer is finished, the new one will be loaded onto
- * the channel */
-
- if (chan->next != NULL) {
- if (chan->load_state == S3C2410_DMALOAD_1LOADED) {
-
- if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
- pr_debug("%s: buff not yet loaded, no more todo\n",
- __FUNCTION__);
- } else {
- chan->load_state = S3C2410_DMALOAD_1RUNNING;
- s3c2410_dma_loadbuffer(chan, chan->next);
- }
-
- } else if (chan->load_state == S3C2410_DMALOAD_1RUNNING) {
- s3c2410_dma_loadbuffer(chan, chan->next);
- }
- }
-
-
- local_irq_restore(flags);
-
- return 0;
-}
-
-/* s3c2410_dma_canload
- *
- * work out if we can queue another buffer into the DMA engine
-*/
-
-static int
-s3c2410_dma_canload(struct s3c2410_dma_chan *chan)
-{
- if (chan->load_state == S3C2410_DMALOAD_NONE ||
- chan->load_state == S3C2410_DMALOAD_1RUNNING)
- return 1;
-
- return 0;
-}
-
-/* s3c2410_dma_enqueue
- *
- * queue an given buffer for dma transfer.
- *
- * id the device driver's id information for this buffer
- * data the physical address of the buffer data
- * size the size of the buffer in bytes
- *
- * If the channel is not running, then the flag S3C2410_DMAF_AUTOSTART
- * is checked, and if set, the channel is started. If this flag isn't set,
- * then an error will be returned.
- *
- * It is possible to queue more than one DMA buffer onto a channel at
- * once, and the code will deal with the re-loading of the next buffer
- * when necessary.
-*/
-
-int s3c2410_dma_enqueue(unsigned int channel, void *id,
- dma_addr_t data, int size)
-{
- struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
- struct s3c2410_dma_buf *buf;
- unsigned long flags;
-
- if (chan == NULL)
- return -EINVAL;
-
- pr_debug("%s: id=%p, data=%08x, size=%d\n",
- __FUNCTION__, id, (unsigned int)data, size);
-
- buf = kmem_cache_alloc(dma_kmem, GFP_ATOMIC);
- if (buf == NULL) {
- pr_debug("%s: out of memory (%ld alloc)\n",
- __FUNCTION__, (long)sizeof(*buf));
- return -ENOMEM;
- }
-
- //pr_debug("%s: new buffer %p\n", __FUNCTION__, buf);
- //dbg_showchan(chan);
-
- buf->next = NULL;
- buf->data = buf->ptr = data;
- buf->size = size;
- buf->id = id;
- buf->magic = BUF_MAGIC;
-
- local_irq_save(flags);
-
- if (chan->curr == NULL) {
- /* we've got nothing loaded... */
- pr_debug("%s: buffer %p queued onto empty channel\n",
- __FUNCTION__, buf);
-
- chan->curr = buf;
- chan->end = buf;
- chan->next = NULL;
- } else {
- pr_debug("dma%d: %s: buffer %p queued onto non-empty channel\n",
- chan->number, __FUNCTION__, buf);
-
- if (chan->end == NULL)
- pr_debug("dma%d: %s: %p not empty, and chan->end==NULL?\n",
- chan->number, __FUNCTION__, chan);
-
- chan->end->next = buf;
- chan->end = buf;
- }
-
- /* if necessary, update the next buffer field */
- if (chan->next == NULL)
- chan->next = buf;
-
- /* check to see if we can load a buffer */
- if (chan->state == S3C2410_DMA_RUNNING) {
- if (chan->load_state == S3C2410_DMALOAD_1LOADED && 1) {
- if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
- printk(KERN_ERR "dma%d: loadbuffer:"
- "timeout loading buffer\n",
- chan->number);
- dbg_showchan(chan);
- local_irq_restore(flags);
- return -EINVAL;
- }
- }
-
- while (s3c2410_dma_canload(chan) && chan->next != NULL) {
- s3c2410_dma_loadbuffer(chan, chan->next);
- }
- } else if (chan->state == S3C2410_DMA_IDLE) {
- if (chan->flags & S3C2410_DMAF_AUTOSTART) {
- s3c2410_dma_ctrl(chan->number, S3C2410_DMAOP_START);
- }
- }
-
- local_irq_restore(flags);
- return 0;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_enqueue);
-
-static inline void
-s3c2410_dma_freebuf(struct s3c2410_dma_buf *buf)
-{
- int magicok = (buf->magic == BUF_MAGIC);
-
- buf->magic = -1;
-
- if (magicok) {
- kmem_cache_free(dma_kmem, buf);
- } else {
- printk("s3c2410_dma_freebuf: buff %p with bad magic\n", buf);
- }
-}
-
-/* s3c2410_dma_lastxfer
- *
- * called when the system is out of buffers, to ensure that the channel
- * is prepared for shutdown.
-*/
-
-static inline void
-s3c2410_dma_lastxfer(struct s3c2410_dma_chan *chan)
-{
-#if 0
- pr_debug("dma%d: s3c2410_dma_lastxfer: load_state %d\n",
- chan->number, chan->load_state);
-#endif
-
- switch (chan->load_state) {
- case S3C2410_DMALOAD_NONE:
- break;
-
- case S3C2410_DMALOAD_1LOADED:
- if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
- /* flag error? */
- printk(KERN_ERR "dma%d: timeout waiting for load (%s)\n",
- chan->number, __FUNCTION__);
- return;
- }
- break;
-
- case S3C2410_DMALOAD_1LOADED_1RUNNING:
- /* I belive in this case we do not have anything to do
- * until the next buffer comes along, and we turn off the
- * reload */
- return;
-
- default:
- pr_debug("dma%d: lastxfer: unhandled load_state %d with no next\n",
- chan->number, chan->load_state);
- return;
-
- }
-
- /* hopefully this'll shut the damned thing up after the transfer... */
- dma_wrreg(chan, S3C2410_DMA_DCON, chan->dcon | S3C2410_DCON_NORELOAD);
-}
-
-
-#define dmadbg2(x...)
-
-static irqreturn_t
-s3c2410_dma_irq(int irq, void *devpw)
-{
- struct s3c2410_dma_chan *chan = (struct s3c2410_dma_chan *)devpw;
- struct s3c2410_dma_buf *buf;
-
- buf = chan->curr;
-
- dbg_showchan(chan);
-
- /* modify the channel state */
-
- switch (chan->load_state) {
- case S3C2410_DMALOAD_1RUNNING:
- /* TODO - if we are running only one buffer, we probably
- * want to reload here, and then worry about the buffer
- * callback */
-
- chan->load_state = S3C2410_DMALOAD_NONE;
- break;
-
- case S3C2410_DMALOAD_1LOADED:
- /* iirc, we should go back to NONE loaded here, we
- * had a buffer, and it was never verified as being
- * loaded.
- */
-
- chan->load_state = S3C2410_DMALOAD_NONE;
- break;
-
- case S3C2410_DMALOAD_1LOADED_1RUNNING:
- /* we'll worry about checking to see if another buffer is
- * ready after we've called back the owner. This should
- * ensure we do not wait around too long for the DMA
- * engine to start the next transfer
- */
-
- chan->load_state = S3C2410_DMALOAD_1LOADED;
- break;
-
- case S3C2410_DMALOAD_NONE:
- printk(KERN_ERR "dma%d: IRQ with no loaded buffer?\n",
- chan->number);
- break;
-
- default:
- printk(KERN_ERR "dma%d: IRQ in invalid load_state %d\n",
- chan->number, chan->load_state);
- break;
- }
-
- if (buf != NULL) {
- /* update the chain to make sure that if we load any more
- * buffers when we call the callback function, things should
- * work properly */
-
- chan->curr = buf->next;
- buf->next = NULL;
-
- if (buf->magic != BUF_MAGIC) {
- printk(KERN_ERR "dma%d: %s: buf %p incorrect magic\n",
- chan->number, __FUNCTION__, buf);
- return IRQ_HANDLED;
- }
-
- s3c2410_dma_buffdone(chan, buf, S3C2410_RES_OK);
-
- /* free resouces */
- s3c2410_dma_freebuf(buf);
- } else {
- }
-
- /* only reload if the channel is still running... our buffer done
- * routine may have altered the state by requesting the dma channel
- * to stop or shutdown... */
-
- /* todo: check that when the channel is shut-down from inside this
- * function, we cope with unsetting reload, etc */
-
- if (chan->next != NULL && chan->state != S3C2410_DMA_IDLE) {
- unsigned long flags;
-
- switch (chan->load_state) {
- case S3C2410_DMALOAD_1RUNNING:
- /* don't need to do anything for this state */
- break;
-
- case S3C2410_DMALOAD_NONE:
- /* can load buffer immediately */
- break;
-
- case S3C2410_DMALOAD_1LOADED:
- if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
- /* flag error? */
- printk(KERN_ERR "dma%d: timeout waiting for load (%s)\n",
- chan->number, __FUNCTION__);
- return IRQ_HANDLED;
- }
-
- break;
-
- case S3C2410_DMALOAD_1LOADED_1RUNNING:
- goto no_load;
-
- default:
- printk(KERN_ERR "dma%d: unknown load_state in irq, %d\n",
- chan->number, chan->load_state);
- return IRQ_HANDLED;
- }
-
- local_irq_save(flags);
- s3c2410_dma_loadbuffer(chan, chan->next);
- local_irq_restore(flags);
- } else {
- s3c2410_dma_lastxfer(chan);
-
- /* see if we can stop this channel.. */
- if (chan->load_state == S3C2410_DMALOAD_NONE) {
- pr_debug("dma%d: end of transfer, stopping channel (%ld)\n",
- chan->number, jiffies);
- s3c2410_dma_ctrl(chan->number | DMACH_LOW_LEVEL,
- S3C2410_DMAOP_STOP);
- }
- }
-
- no_load:
- return IRQ_HANDLED;
-}
-
-static struct s3c2410_dma_chan *s3c2410_dma_map_channel(int channel);
-
-/* s3c2410_request_dma
- *
- * get control of an dma channel
-*/
-
-int s3c2410_dma_request(unsigned int channel,
- struct s3c2410_dma_client *client,
- void *dev)
-{
- struct s3c2410_dma_chan *chan;
- unsigned long flags;
- int err;
-
- pr_debug("dma%d: s3c2410_request_dma: client=%s, dev=%p\n",
- channel, client->name, dev);
-
- local_irq_save(flags);
-
- chan = s3c2410_dma_map_channel(channel);
- if (chan == NULL) {
- local_irq_restore(flags);
- return -EBUSY;
- }
-
- dbg_showchan(chan);
-
- chan->client = client;
- chan->in_use = 1;
-
- if (!chan->irq_claimed) {
- pr_debug("dma%d: %s : requesting irq %d\n",
- channel, __FUNCTION__, chan->irq);
-
- chan->irq_claimed = 1;
- local_irq_restore(flags);
-
- err = request_irq(chan->irq, s3c2410_dma_irq, IRQF_DISABLED,
- client->name, (void *)chan);
-
- local_irq_save(flags);
-
- if (err) {
- chan->in_use = 0;
- chan->irq_claimed = 0;
- local_irq_restore(flags);
-
- printk(KERN_ERR "%s: cannot get IRQ %d for DMA %d\n",
- client->name, chan->irq, chan->number);
- return err;
- }
-
- chan->irq_enabled = 1;
- }
-
- local_irq_restore(flags);
-
- /* need to setup */
-
- pr_debug("%s: channel initialised, %p\n", __FUNCTION__, chan);
-
- return 0;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_request);
-
-/* s3c2410_dma_free
- *
- * release the given channel back to the system, will stop and flush
- * any outstanding transfers, and ensure the channel is ready for the
- * next claimant.
- *
- * Note, although a warning is currently printed if the freeing client
- * info is not the same as the registrant's client info, the free is still
- * allowed to go through.
-*/
-
-int s3c2410_dma_free(dmach_t channel, struct s3c2410_dma_client *client)
-{
- struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
- unsigned long flags;
-
- if (chan == NULL)
- return -EINVAL;
-
- local_irq_save(flags);
-
- if (chan->client != client) {
- printk(KERN_WARNING "dma%d: possible free from different client (channel %p, passed %p)\n",
- channel, chan->client, client);
- }
-
- /* sort out stopping and freeing the channel */
-
- if (chan->state != S3C2410_DMA_IDLE) {
- pr_debug("%s: need to stop dma channel %p\n",
- __FUNCTION__, chan);
-
- /* possibly flush the channel */
- s3c2410_dma_ctrl(channel, S3C2410_DMAOP_STOP);
- }
-
- chan->client = NULL;
- chan->in_use = 0;
-
- if (chan->irq_claimed)
- free_irq(chan->irq, (void *)chan);
-
- chan->irq_claimed = 0;
-
- if (!(channel & DMACH_LOW_LEVEL))
- dma_chan_map[channel] = NULL;
-
- local_irq_restore(flags);
-
- return 0;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_free);
-
-static int s3c2410_dma_dostop(struct s3c2410_dma_chan *chan)
-{
- unsigned long flags;
- unsigned long tmp;
-
- pr_debug("%s:\n", __FUNCTION__);
-
- dbg_showchan(chan);
-
- local_irq_save(flags);
-
- s3c2410_dma_call_op(chan, S3C2410_DMAOP_STOP);
-
- tmp = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG);
- tmp |= S3C2410_DMASKTRIG_STOP;
- //tmp &= ~S3C2410_DMASKTRIG_ON;
- dma_wrreg(chan, S3C2410_DMA_DMASKTRIG, tmp);
-
-#if 0
- /* should also clear interrupts, according to WinCE BSP */
- tmp = dma_rdreg(chan, S3C2410_DMA_DCON);
- tmp |= S3C2410_DCON_NORELOAD;
- dma_wrreg(chan, S3C2410_DMA_DCON, tmp);
-#endif
-
- /* should stop do this, or should we wait for flush? */
- chan->state = S3C2410_DMA_IDLE;
- chan->load_state = S3C2410_DMALOAD_NONE;
-
- local_irq_restore(flags);
-
- return 0;
-}
-
-void s3c2410_dma_waitforstop(struct s3c2410_dma_chan *chan)
-{
- unsigned long tmp;
- unsigned int timeout = 0x10000;
-
- while (timeout-- > 0) {
- tmp = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG);
-
- if (!(tmp & S3C2410_DMASKTRIG_ON))
- return;
- }
-
- pr_debug("dma%d: failed to stop?\n", chan->number);
-}
-
-
-/* s3c2410_dma_flush
- *
- * stop the channel, and remove all current and pending transfers
-*/
-
-static int s3c2410_dma_flush(struct s3c2410_dma_chan *chan)
-{
- struct s3c2410_dma_buf *buf, *next;
- unsigned long flags;
-
- pr_debug("%s: chan %p (%d)\n", __FUNCTION__, chan, chan->number);
-
- dbg_showchan(chan);
-
- local_irq_save(flags);
-
- if (chan->state != S3C2410_DMA_IDLE) {
- pr_debug("%s: stopping channel...\n", __FUNCTION__ );
- s3c2410_dma_ctrl(chan->number, S3C2410_DMAOP_STOP);
- }
-
- buf = chan->curr;
- if (buf == NULL)
- buf = chan->next;
-
- chan->curr = chan->next = chan->end = NULL;
-
- if (buf != NULL) {
- for ( ; buf != NULL; buf = next) {
- next = buf->next;
-
- pr_debug("%s: free buffer %p, next %p\n",
- __FUNCTION__, buf, buf->next);
-
- s3c2410_dma_buffdone(chan, buf, S3C2410_RES_ABORT);
- s3c2410_dma_freebuf(buf);
- }
- }
-
- dbg_showregs(chan);
-
- s3c2410_dma_waitforstop(chan);
-
-#if 0
- /* should also clear interrupts, according to WinCE BSP */
- {
- unsigned long tmp;
-
- tmp = dma_rdreg(chan, S3C2410_DMA_DCON);
- tmp |= S3C2410_DCON_NORELOAD;
- dma_wrreg(chan, S3C2410_DMA_DCON, tmp);
- }
-#endif
-
- dbg_showregs(chan);
-
- local_irq_restore(flags);
-
- return 0;
-}
-
-int
-s3c2410_dma_started(struct s3c2410_dma_chan *chan)
-{
- unsigned long flags;
-
- local_irq_save(flags);
-
- dbg_showchan(chan);
-
- /* if we've only loaded one buffer onto the channel, then chec
- * to see if we have another, and if so, try and load it so when
- * the first buffer is finished, the new one will be loaded onto
- * the channel */
-
- if (chan->next != NULL) {
- if (chan->load_state == S3C2410_DMALOAD_1LOADED) {
-
- if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
- pr_debug("%s: buff not yet loaded, no more todo\n",
- __FUNCTION__);
- } else {
- chan->load_state = S3C2410_DMALOAD_1RUNNING;
- s3c2410_dma_loadbuffer(chan, chan->next);
- }
-
- } else if (chan->load_state == S3C2410_DMALOAD_1RUNNING) {
- s3c2410_dma_loadbuffer(chan, chan->next);
- }
- }
-
-
- local_irq_restore(flags);
-
- return 0;
-
-}
-
-int
-s3c2410_dma_ctrl(dmach_t channel, enum s3c2410_chan_op op)
-{
- struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
-
- if (chan == NULL)
- return -EINVAL;
-
- switch (op) {
- case S3C2410_DMAOP_START:
- return s3c2410_dma_start(chan);
-
- case S3C2410_DMAOP_STOP:
- return s3c2410_dma_dostop(chan);
-
- case S3C2410_DMAOP_PAUSE:
- case S3C2410_DMAOP_RESUME:
- return -ENOENT;
-
- case S3C2410_DMAOP_FLUSH:
- return s3c2410_dma_flush(chan);
-
- case S3C2410_DMAOP_STARTED:
- return s3c2410_dma_started(chan);
-
- case S3C2410_DMAOP_TIMEOUT:
- return 0;
-
- }
-
- return -ENOENT; /* unknown, don't bother */
-}
-
-EXPORT_SYMBOL(s3c2410_dma_ctrl);
-
-/* DMA configuration for each channel
- *
- * DISRCC -> source of the DMA (AHB,APB)
- * DISRC -> source address of the DMA
- * DIDSTC -> destination of the DMA (AHB,APD)
- * DIDST -> destination address of the DMA
-*/
-
-/* s3c2410_dma_config
- *
- * xfersize: size of unit in bytes (1,2,4)
- * dcon: base value of the DCONx register
-*/
-
-int s3c2410_dma_config(dmach_t channel,
- int xferunit,
- int dcon)
-{
- struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
-
- pr_debug("%s: chan=%d, xfer_unit=%d, dcon=%08x\n",
- __FUNCTION__, channel, xferunit, dcon);
-
- if (chan == NULL)
- return -EINVAL;
-
- pr_debug("%s: Initial dcon is %08x\n", __FUNCTION__, dcon);
-
- dcon |= chan->dcon & dma_sel.dcon_mask;
-
- pr_debug("%s: New dcon is %08x\n", __FUNCTION__, dcon);
-
- switch (xferunit) {
- case 1:
- dcon |= S3C2410_DCON_BYTE;
- break;
-
- case 2:
- dcon |= S3C2410_DCON_HALFWORD;
- break;
-
- case 4:
- dcon |= S3C2410_DCON_WORD;
- break;
-
- default:
- pr_debug("%s: bad transfer size %d\n", __FUNCTION__, xferunit);
- return -EINVAL;
- }
-
- dcon |= S3C2410_DCON_HWTRIG;
- dcon |= S3C2410_DCON_INTREQ;
-
- pr_debug("%s: dcon now %08x\n", __FUNCTION__, dcon);
-
- chan->dcon = dcon;
- chan->xfer_unit = xferunit;
-
- return 0;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_config);
-
-int s3c2410_dma_setflags(dmach_t channel, unsigned int flags)
-{
- struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
-
- if (chan == NULL)
- return -EINVAL;
-
- pr_debug("%s: chan=%p, flags=%08x\n", __FUNCTION__, chan, flags);
-
- chan->flags = flags;
-
- return 0;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_setflags);
-
-
-/* do we need to protect the settings of the fields from
- * irq?
-*/
-
-int s3c2410_dma_set_opfn(dmach_t channel, s3c2410_dma_opfn_t rtn)
-{
- struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
-
- if (chan == NULL)
- return -EINVAL;
-
- pr_debug("%s: chan=%p, op rtn=%p\n", __FUNCTION__, chan, rtn);
-
- chan->op_fn = rtn;
-
- return 0;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_set_opfn);
-
-int s3c2410_dma_set_buffdone_fn(dmach_t channel, s3c2410_dma_cbfn_t rtn)
-{
- struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
-
- if (chan == NULL)
- return -EINVAL;
-
- pr_debug("%s: chan=%p, callback rtn=%p\n", __FUNCTION__, chan, rtn);
-
- chan->callback_fn = rtn;
-
- return 0;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_set_buffdone_fn);
-
-/* s3c2410_dma_devconfig
- *
- * configure the dma source/destination hardware type and address
- *
- * source: S3C2410_DMASRC_HW: source is hardware
- * S3C2410_DMASRC_MEM: source is memory
- *
- * hwcfg: the value for xxxSTCn register,
- * bit 0: 0=increment pointer, 1=leave pointer
- * bit 1: 0=soucre is AHB, 1=soucre is APB
- *
- * devaddr: physical address of the source
-*/
-
-int s3c2410_dma_devconfig(int channel,
- enum s3c2410_dmasrc source,
- int hwcfg,
- unsigned long devaddr)
-{
- struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
-
- if (chan == NULL)
- return -EINVAL;
-
- pr_debug("%s: source=%d, hwcfg=%08x, devaddr=%08lx\n",
- __FUNCTION__, (int)source, hwcfg, devaddr);
-
- chan->source = source;
- chan->dev_addr = devaddr;
-
- switch (source) {
- case S3C2410_DMASRC_HW:
- /* source is hardware */
- pr_debug("%s: hw source, devaddr=%08lx, hwcfg=%d\n",
- __FUNCTION__, devaddr, hwcfg);
- dma_wrreg(chan, S3C2410_DMA_DISRCC, hwcfg & 3);
- dma_wrreg(chan, S3C2410_DMA_DISRC, devaddr);
- dma_wrreg(chan, S3C2410_DMA_DIDSTC, (0<<1) | (0<<0));
-
- chan->addr_reg = dma_regaddr(chan, S3C2410_DMA_DIDST);
- return 0;
-
- case S3C2410_DMASRC_MEM:
- /* source is memory */
- pr_debug( "%s: mem source, devaddr=%08lx, hwcfg=%d\n",
- __FUNCTION__, devaddr, hwcfg);
- dma_wrreg(chan, S3C2410_DMA_DISRCC, (0<<1) | (0<<0));
- dma_wrreg(chan, S3C2410_DMA_DIDST, devaddr);
- dma_wrreg(chan, S3C2410_DMA_DIDSTC, hwcfg & 3);
-
- chan->addr_reg = dma_regaddr(chan, S3C2410_DMA_DISRC);
- return 0;
- }
-
- printk(KERN_ERR "dma%d: invalid source type (%d)\n", channel, source);
- return -EINVAL;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_devconfig);
-
-/* s3c2410_dma_getposition
- *
- * returns the current transfer points for the dma source and destination
-*/
-
-int s3c2410_dma_getposition(dmach_t channel, dma_addr_t *src, dma_addr_t *dst)
-{
- struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
-
- if (chan == NULL)
- return -EINVAL;
-
- if (src != NULL)
- *src = dma_rdreg(chan, S3C2410_DMA_DCSRC);
-
- if (dst != NULL)
- *dst = dma_rdreg(chan, S3C2410_DMA_DCDST);
-
- return 0;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_getposition);
-
-
-/* system device class */
-
-#ifdef CONFIG_PM
-
-static int s3c2410_dma_suspend(struct sys_device *dev, pm_message_t state)
-{
- struct s3c2410_dma_chan *cp = container_of(dev, struct s3c2410_dma_chan, dev);
-
- printk(KERN_DEBUG "suspending dma channel %d\n", cp->number);
-
- if (dma_rdreg(cp, S3C2410_DMA_DMASKTRIG) & S3C2410_DMASKTRIG_ON) {
- /* the dma channel is still working, which is probably
- * a bad thing to do over suspend/resume. We stop the
- * channel and assume that the client is either going to
- * retry after resume, or that it is broken.
- */
-
- printk(KERN_INFO "dma: stopping channel %d due to suspend\n",
- cp->number);
-
- s3c2410_dma_dostop(cp);
- }
-
- return 0;
-}
-
-static int s3c2410_dma_resume(struct sys_device *dev)
-{
- return 0;
-}
-
-#else
-#define s3c2410_dma_suspend NULL
-#define s3c2410_dma_resume NULL
-#endif /* CONFIG_PM */
-
-struct sysdev_class dma_sysclass = {
- set_kset_name("s3c24xx-dma"),
- .suspend = s3c2410_dma_suspend,
- .resume = s3c2410_dma_resume,
+static struct s3c24xx_dma_selection __initdata s3c2410_dma_sel = {
+ .select = s3c2410_dma_select,
+ .dcon_mask = 7 << 24,
+ .map = s3c2410_dma_mappings,
+ .map_size = ARRAY_SIZE(s3c2410_dma_mappings),
};
-/* kmem cache implementation */
+static struct s3c24xx_dma_order __initdata s3c2410_dma_order = {
+ .channels = {
+ [DMACH_SDI] = {
+ .list = {
+ [0] = 3 | DMA_CH_VALID,
+ [1] = 2 | DMA_CH_VALID,
+ [2] = 0 | DMA_CH_VALID,
+ },
+ },
+ [DMACH_I2S_IN] = {
+ .list = {
+ [0] = 1 | DMA_CH_VALID,
+ [1] = 2 | DMA_CH_VALID,
+ },
+ },
+ },
+};
-static void s3c2410_dma_cache_ctor(void *p, struct kmem_cache *c, unsigned long f)
+static int s3c2410_dma_add(struct sys_device *sysdev)
{
- memset(p, 0, sizeof(struct s3c2410_dma_buf));
+ s3c2410_dma_init();
+ s3c24xx_dma_order_set(&s3c2410_dma_order);
+ return s3c24xx_dma_init_map(&s3c2410_dma_sel);
}
-/* initialisation code */
+#if defined(CONFIG_CPU_S3C2410)
+static struct sysdev_driver s3c2410_dma_driver = {
+ .add = s3c2410_dma_add,
+};
-static int __init s3c2410_init_dma(void)
+static int __init s3c2410_dma_drvinit(void)
{
- struct s3c2410_dma_chan *cp;
- int channel;
- int ret;
-
- printk("S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics\n");
-
- dma_base = ioremap(S3C24XX_PA_DMA, 0x200);
- if (dma_base == NULL) {
- printk(KERN_ERR "dma failed to remap register block\n");
- return -ENOMEM;
- }
-
- printk("Registering sysclass\n");
-
- ret = sysdev_class_register(&dma_sysclass);
- if (ret != 0) {
- printk(KERN_ERR "dma sysclass registration failed\n");
- goto err;
- }
-
- dma_kmem = kmem_cache_create("dma_desc", sizeof(struct s3c2410_dma_buf), 0,
- SLAB_HWCACHE_ALIGN,
- s3c2410_dma_cache_ctor, NULL);
-
- if (dma_kmem == NULL) {
- printk(KERN_ERR "dma failed to make kmem cache\n");
- ret = -ENOMEM;
- goto err;
- }
-
- for (channel = 0; channel < S3C2410_DMA_CHANNELS; channel++) {
- cp = &s3c2410_chans[channel];
-
- memset(cp, 0, sizeof(struct s3c2410_dma_chan));
-
- /* dma channel irqs are in order.. */
- cp->number = channel;
- cp->irq = channel + IRQ_DMA0;
- cp->regs = dma_base + (channel*0x40);
-
- /* point current stats somewhere */
- cp->stats = &cp->stats_store;
- cp->stats_store.timeout_shortest = LONG_MAX;
-
- /* basic channel configuration */
-
- cp->load_timeout = 1<<18;
-
- /* register system device */
-
- cp->dev.cls = &dma_sysclass;
- cp->dev.id = channel;
- ret = sysdev_register(&cp->dev);
-
- printk("DMA channel %d at %p, irq %d\n",
- cp->number, cp->regs, cp->irq);
- }
-
- return 0;
-
- err:
- kmem_cache_destroy(dma_kmem);
- iounmap(dma_base);
- dma_base = NULL;
- return ret;
+ return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_dma_driver);
}
-core_initcall(s3c2410_init_dma);
+arch_initcall(s3c2410_dma_drvinit);
+#endif
-static inline int is_channel_valid(unsigned int channel)
+#if defined(CONFIG_CPU_S3C2442)
+/* S3C2442 DMA contains the same selection table as the S3C2410 */
+static struct sysdev_driver s3c2442_dma_driver = {
+ .add = s3c2410_dma_add,
+};
+
+static int __init s3c2442_dma_drvinit(void)
{
- return (channel & DMA_CH_VALID);
+ return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_dma_driver);
}
-/* s3c2410_dma_map_channel()
- *
- * turn the virtual channel number into a real, and un-used hardware
- * channel.
- *
- * currently this code uses first-free channel from the specified harware
- * map, not taking into account anything that the board setup code may
- * have to say about the likely peripheral set to be in use.
-*/
+arch_initcall(s3c2442_dma_drvinit);
+#endif
-struct s3c2410_dma_chan *s3c2410_dma_map_channel(int channel)
-{
- struct s3c24xx_dma_map *ch_map;
- struct s3c2410_dma_chan *dmach;
- int ch;
-
- if (dma_sel.map == NULL || channel > dma_sel.map_size)
- return NULL;
-
- ch_map = dma_sel.map + channel;
-
- for (ch = 0; ch < S3C2410_DMA_CHANNELS; ch++) {
- if (!is_channel_valid(ch_map->channels[ch]))
- continue;
-
- if (s3c2410_chans[ch].in_use == 0) {
- printk("mapped channel %d to %d\n", channel, ch);
- break;
- }
- }
-
- if (ch >= S3C2410_DMA_CHANNELS)
- return NULL;
-
- /* update our channel mapping */
-
- dmach = &s3c2410_chans[ch];
- dma_chan_map[channel] = dmach;
-
- /* select the channel */
-
- (dma_sel.select)(dmach, ch_map);
-
- return dmach;
-}
-
-static void s3c24xx_dma_show_ch(struct s3c24xx_dma_map *map, int ch)
-{
- /* show the channel configuration */
-
- printk("%2d: %20s, channels %c%c%c%c\n", ch, map->name,
- (is_channel_valid(map->channels[0]) ? '0' : '-'),
- (is_channel_valid(map->channels[1]) ? '1' : '-'),
- (is_channel_valid(map->channels[2]) ? '2' : '-'),
- (is_channel_valid(map->channels[3]) ? '3' : '-'));
-}
-
-static int s3c24xx_dma_check_entry(struct s3c24xx_dma_map *map, int ch)
-{
- if (1)
- s3c24xx_dma_show_ch(map, ch);
-
- return 0;
-}
-
-int __init s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel)
-{
- struct s3c24xx_dma_map *nmap;
- size_t map_sz = sizeof(*nmap) * sel->map_size;
- int ptr;
-
- nmap = kmalloc(map_sz, GFP_KERNEL);
- if (nmap == NULL)
- return -ENOMEM;
-
- memcpy(nmap, sel->map, map_sz);
- memcpy(&dma_sel, sel, sizeof(*sel));
-
- dma_sel.map = nmap;
-
- for (ptr = 0; ptr < sel->map_size; ptr++)
- s3c24xx_dma_check_entry(nmap+ptr, ptr);
-
- return 0;
-}
diff --git a/arch/arm/mach-s3c2410/dma.h b/arch/arm/mach-s3c2410/dma.h
deleted file mode 100644
index 0ebfe0a..0000000
--- a/arch/arm/mach-s3c2410/dma.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/* arch/arm/mach-s3c2410/dma.h
- *
- * Copyright (C) 2006 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Samsung S3C24XX DMA support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-extern struct sysdev_class dma_sysclass;
-extern struct s3c2410_dma_chan s3c2410_chans[S3C2410_DMA_CHANNELS];
-
-#define DMA_CH_VALID (1<<31)
-
-struct s3c24xx_dma_addr {
- unsigned long from;
- unsigned long to;
-};
-
-/* struct s3c24xx_dma_map
- *
- * this holds the mapping information for the channel selected
- * to be connected to the specified device
-*/
-
-struct s3c24xx_dma_map {
- const char *name;
- struct s3c24xx_dma_addr hw_addr;
-
- unsigned long channels[S3C2410_DMA_CHANNELS];
-};
-
-struct s3c24xx_dma_selection {
- struct s3c24xx_dma_map *map;
- unsigned long map_size;
- unsigned long dcon_mask;
-
- void (*select)(struct s3c2410_dma_chan *chan,
- struct s3c24xx_dma_map *map);
-};
-
-extern int s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel);
diff --git a/arch/arm/mach-s3c2410/gpio.c b/arch/arm/mach-s3c2410/gpio.c
index f6fb215..01e795d 100644
--- a/arch/arm/mach-s3c2410/gpio.c
+++ b/arch/arm/mach-s3c2410/gpio.c
@@ -1,9 +1,9 @@
/* linux/arch/arm/mach-s3c2410/gpio.c
*
- * Copyright (c) 2004-2005 Simtec Electronics
+ * Copyright (c) 2004-2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
- * S3C24XX GPIO support
+ * S3C2410 GPIO support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -18,8 +18,7 @@
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-*/
-
+ */
#include <linux/kernel.h>
#include <linux/init.h>
@@ -33,156 +32,40 @@
#include <asm/arch/regs-gpio.h>
-void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function)
+int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
+ unsigned int config)
{
- void __iomem *base = S3C24XX_GPIO_BASE(pin);
- unsigned long mask;
- unsigned long con;
+ void __iomem *reg = S3C24XX_EINFLT0;
unsigned long flags;
+ unsigned long val;
- if (pin < S3C2410_GPIO_BANKB) {
- mask = 1 << S3C2410_GPIO_OFFSET(pin);
- } else {
- mask = 3 << S3C2410_GPIO_OFFSET(pin)*2;
- }
+ if (pin < S3C2410_GPG8 || pin > S3C2410_GPG15)
+ return -1;
- switch (function) {
- case S3C2410_GPIO_LEAVE:
- mask = 0;
- function = 0;
- break;
+ config &= 0xff;
- case S3C2410_GPIO_INPUT:
- case S3C2410_GPIO_OUTPUT:
- case S3C2410_GPIO_SFN2:
- case S3C2410_GPIO_SFN3:
- if (pin < S3C2410_GPIO_BANKB) {
- function -= 1;
- function &= 1;
- function <<= S3C2410_GPIO_OFFSET(pin);
- } else {
- function &= 3;
- function <<= S3C2410_GPIO_OFFSET(pin)*2;
- }
- }
-
- /* modify the specified register wwith IRQs off */
+ pin -= S3C2410_GPG8;
+ reg += pin & ~3;
local_irq_save(flags);
- con = __raw_readl(base + 0x00);
- con &= ~mask;
- con |= function;
+ /* update filter width and clock source */
- __raw_writel(con, base + 0x00);
+ val = __raw_readl(reg);
+ val &= ~(0xff << ((pin & 3) * 8));
+ val |= config << ((pin & 3) * 8);
+ __raw_writel(val, reg);
+
+ /* update filter enable */
+
+ val = __raw_readl(S3C24XX_EXTINT2);
+ val &= ~(1 << ((pin * 4) + 3));
+ val |= on << ((pin * 4) + 3);
+ __raw_writel(val, S3C24XX_EXTINT2);
local_irq_restore(flags);
+
+ return 0;
}
-EXPORT_SYMBOL(s3c2410_gpio_cfgpin);
-
-unsigned int s3c2410_gpio_getcfg(unsigned int pin)
-{
- void __iomem *base = S3C24XX_GPIO_BASE(pin);
- unsigned long val = __raw_readl(base);
-
- if (pin < S3C2410_GPIO_BANKB) {
- val >>= S3C2410_GPIO_OFFSET(pin);
- val &= 1;
- val += 1;
- } else {
- val >>= S3C2410_GPIO_OFFSET(pin)*2;
- val &= 3;
- }
-
- return val | S3C2410_GPIO_INPUT;
-}
-
-EXPORT_SYMBOL(s3c2410_gpio_getcfg);
-
-void s3c2410_gpio_pullup(unsigned int pin, unsigned int to)
-{
- void __iomem *base = S3C24XX_GPIO_BASE(pin);
- unsigned long offs = S3C2410_GPIO_OFFSET(pin);
- unsigned long flags;
- unsigned long up;
-
- if (pin < S3C2410_GPIO_BANKB)
- return;
-
- local_irq_save(flags);
-
- up = __raw_readl(base + 0x08);
- up &= ~(1L << offs);
- up |= to << offs;
- __raw_writel(up, base + 0x08);
-
- local_irq_restore(flags);
-}
-
-EXPORT_SYMBOL(s3c2410_gpio_pullup);
-
-void s3c2410_gpio_setpin(unsigned int pin, unsigned int to)
-{
- void __iomem *base = S3C24XX_GPIO_BASE(pin);
- unsigned long offs = S3C2410_GPIO_OFFSET(pin);
- unsigned long flags;
- unsigned long dat;
-
- local_irq_save(flags);
-
- dat = __raw_readl(base + 0x04);
- dat &= ~(1 << offs);
- dat |= to << offs;
- __raw_writel(dat, base + 0x04);
-
- local_irq_restore(flags);
-}
-
-EXPORT_SYMBOL(s3c2410_gpio_setpin);
-
-unsigned int s3c2410_gpio_getpin(unsigned int pin)
-{
- void __iomem *base = S3C24XX_GPIO_BASE(pin);
- unsigned long offs = S3C2410_GPIO_OFFSET(pin);
-
- return __raw_readl(base + 0x04) & (1<< offs);
-}
-
-EXPORT_SYMBOL(s3c2410_gpio_getpin);
-
-unsigned int s3c2410_modify_misccr(unsigned int clear, unsigned int change)
-{
- unsigned long flags;
- unsigned long misccr;
-
- local_irq_save(flags);
- misccr = __raw_readl(S3C24XX_MISCCR);
- misccr &= ~clear;
- misccr ^= change;
- __raw_writel(misccr, S3C24XX_MISCCR);
- local_irq_restore(flags);
-
- return misccr;
-}
-
-EXPORT_SYMBOL(s3c2410_modify_misccr);
-
-int s3c2410_gpio_getirq(unsigned int pin)
-{
- if (pin < S3C2410_GPF0 || pin > S3C2410_GPG15)
- return -1; /* not valid interrupts */
-
- if (pin < S3C2410_GPG0 && pin > S3C2410_GPF7)
- return -1; /* not valid pin */
-
- if (pin < S3C2410_GPF4)
- return (pin - S3C2410_GPF0) + IRQ_EINT0;
-
- if (pin < S3C2410_GPG0)
- return (pin - S3C2410_GPF4) + IRQ_EINT4;
-
- return (pin - S3C2410_GPG0) + IRQ_EINT8;
-}
-
-EXPORT_SYMBOL(s3c2410_gpio_getirq);
+EXPORT_SYMBOL(s3c2410_gpio_irqfilter);
diff --git a/arch/arm/mach-s3c2410/irq.c b/arch/arm/mach-s3c2410/irq.c
index 3c0ed78..53cbdaa 100644
--- a/arch/arm/mach-s3c2410/irq.c
+++ b/arch/arm/mach-s3c2410/irq.c
@@ -1,6 +1,6 @@
/* linux/arch/arm/mach-s3c2410/irq.c
*
- * Copyright (c) 2003,2004 Simtec Electronics
+ * Copyright (c) 2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* This program is free software; you can redistribute it and/or modify
@@ -17,37 +17,6 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
- * Changelog:
- *
- * 22-Jul-2004 Ben Dooks <ben@simtec.co.uk>
- * Fixed compile warnings
- *
- * 22-Jul-2004 Roc Wu <cooloney@yahoo.com.cn>
- * Fixed s3c_extirq_type
- *
- * 21-Jul-2004 Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org>
- * Addition of ADC/TC demux
- *
- * 04-Oct-2004 Klaus Fetscher <k.fetscher@fetron.de>
- * Fix for set_irq_type() on low EINT numbers
- *
- * 05-Oct-2004 Ben Dooks <ben@simtec.co.uk>
- * Tidy up KF's patch and sort out new release
- *
- * 05-Oct-2004 Ben Dooks <ben@simtec.co.uk>
- * Add support for power management controls
- *
- * 04-Nov-2004 Ben Dooks
- * Fix standard IRQ wake for EINT0..4 and RTC
- *
- * 22-Feb-2005 Ben Dooks
- * Fixed edge-triggering on ADC IRQ
- *
- * 28-Jun-2005 Ben Dooks
- * Mark IRQ_LCD valid
- *
- * 25-Jul-2005 Ben Dooks
- * Split the S3C2440 IRQ code to seperate file
*/
#include <linux/init.h>
@@ -57,745 +26,23 @@
#include <linux/ptrace.h>
#include <linux/sysdev.h>
-#include <asm/hardware.h>
-#include <asm/irq.h>
-#include <asm/io.h>
+#include <asm/plat-s3c24xx/cpu.h>
+#include <asm/plat-s3c24xx/pm.h>
-#include <asm/mach/irq.h>
-
-#include <asm/arch/regs-irq.h>
-#include <asm/arch/regs-gpio.h>
-
-#include "cpu.h"
-#include "pm.h"
-#include "irq.h"
-
-/* wakeup irq control */
-
-#ifdef CONFIG_PM
-
-/* state for IRQs over sleep */
-
-/* default is to allow for EINT0..EINT15, and IRQ_RTC as wakeup sources
- *
- * set bit to 1 in allow bitfield to enable the wakeup settings on it
-*/
-
-unsigned long s3c_irqwake_intallow = 1L << (IRQ_RTC - IRQ_EINT0) | 0xfL;
-unsigned long s3c_irqwake_intmask = 0xffffffffL;
-unsigned long s3c_irqwake_eintallow = 0x0000fff0L;
-unsigned long s3c_irqwake_eintmask = 0xffffffffL;
-
-int
-s3c_irq_wake(unsigned int irqno, unsigned int state)
+static int s3c2410_irq_add(struct sys_device *sysdev)
{
- unsigned long irqbit = 1 << (irqno - IRQ_EINT0);
-
- if (!(s3c_irqwake_intallow & irqbit))
- return -ENOENT;
-
- printk(KERN_INFO "wake %s for irq %d\n",
- state ? "enabled" : "disabled", irqno);
-
- if (!state)
- s3c_irqwake_intmask |= irqbit;
- else
- s3c_irqwake_intmask &= ~irqbit;
-
return 0;
}
-static int
-s3c_irqext_wake(unsigned int irqno, unsigned int state)
-{
- unsigned long bit = 1L << (irqno - EXTINT_OFF);
-
- if (!(s3c_irqwake_eintallow & bit))
- return -ENOENT;
-
- printk(KERN_INFO "wake %s for irq %d\n",
- state ? "enabled" : "disabled", irqno);
-
- if (!state)
- s3c_irqwake_eintmask |= bit;
- else
- s3c_irqwake_eintmask &= ~bit;
-
- return 0;
-}
-
-#else
-#define s3c_irqext_wake NULL
-#define s3c_irq_wake NULL
-#endif
-
-
-static void
-s3c_irq_mask(unsigned int irqno)
-{
- unsigned long mask;
-
- irqno -= IRQ_EINT0;
-
- mask = __raw_readl(S3C2410_INTMSK);
- mask |= 1UL << irqno;
- __raw_writel(mask, S3C2410_INTMSK);
-}
-
-static inline void
-s3c_irq_ack(unsigned int irqno)
-{
- unsigned long bitval = 1UL << (irqno - IRQ_EINT0);
-
- __raw_writel(bitval, S3C2410_SRCPND);
- __raw_writel(bitval, S3C2410_INTPND);
-}
-
-static inline void
-s3c_irq_maskack(unsigned int irqno)
-{
- unsigned long bitval = 1UL << (irqno - IRQ_EINT0);
- unsigned long mask;
-
- mask = __raw_readl(S3C2410_INTMSK);
- __raw_writel(mask|bitval, S3C2410_INTMSK);
-
- __raw_writel(bitval, S3C2410_SRCPND);
- __raw_writel(bitval, S3C2410_INTPND);
-}
-
-
-static void
-s3c_irq_unmask(unsigned int irqno)
-{
- unsigned long mask;
-
- if (irqno != IRQ_TIMER4 && irqno != IRQ_EINT8t23)
- irqdbf2("s3c_irq_unmask %d\n", irqno);
-
- irqno -= IRQ_EINT0;
-
- mask = __raw_readl(S3C2410_INTMSK);
- mask &= ~(1UL << irqno);
- __raw_writel(mask, S3C2410_INTMSK);
-}
-
-struct irq_chip s3c_irq_level_chip = {
- .name = "s3c-level",
- .ack = s3c_irq_maskack,
- .mask = s3c_irq_mask,
- .unmask = s3c_irq_unmask,
- .set_wake = s3c_irq_wake
+static struct sysdev_driver s3c2410_irq_driver = {
+ .add = s3c2410_irq_add,
+ .suspend = s3c24xx_irq_suspend,
+ .resume = s3c24xx_irq_resume,
};
-static struct irq_chip s3c_irq_chip = {
- .name = "s3c",
- .ack = s3c_irq_ack,
- .mask = s3c_irq_mask,
- .unmask = s3c_irq_unmask,
- .set_wake = s3c_irq_wake
-};
-
-static void
-s3c_irqext_mask(unsigned int irqno)
+static int s3c2410_irq_init(void)
{
- unsigned long mask;
-
- irqno -= EXTINT_OFF;
-
- mask = __raw_readl(S3C24XX_EINTMASK);
- mask |= ( 1UL << irqno);
- __raw_writel(mask, S3C24XX_EINTMASK);
+ return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_irq_driver);
}
-static void
-s3c_irqext_ack(unsigned int irqno)
-{
- unsigned long req;
- unsigned long bit;
- unsigned long mask;
-
- bit = 1UL << (irqno - EXTINT_OFF);
-
- mask = __raw_readl(S3C24XX_EINTMASK);
-
- __raw_writel(bit, S3C24XX_EINTPEND);
-
- req = __raw_readl(S3C24XX_EINTPEND);
- req &= ~mask;
-
- /* not sure if we should be acking the parent irq... */
-
- if (irqno <= IRQ_EINT7 ) {
- if ((req & 0xf0) == 0)
- s3c_irq_ack(IRQ_EINT4t7);
- } else {
- if ((req >> 8) == 0)
- s3c_irq_ack(IRQ_EINT8t23);
- }
-}
-
-static void
-s3c_irqext_unmask(unsigned int irqno)
-{
- unsigned long mask;
-
- irqno -= EXTINT_OFF;
-
- mask = __raw_readl(S3C24XX_EINTMASK);
- mask &= ~( 1UL << irqno);
- __raw_writel(mask, S3C24XX_EINTMASK);
-}
-
-int
-s3c_irqext_type(unsigned int irq, unsigned int type)
-{
- void __iomem *extint_reg;
- void __iomem *gpcon_reg;
- unsigned long gpcon_offset, extint_offset;
- unsigned long newvalue = 0, value;
-
- if ((irq >= IRQ_EINT0) && (irq <= IRQ_EINT3))
- {
- gpcon_reg = S3C2410_GPFCON;
- extint_reg = S3C24XX_EXTINT0;
- gpcon_offset = (irq - IRQ_EINT0) * 2;
- extint_offset = (irq - IRQ_EINT0) * 4;
- }
- else if ((irq >= IRQ_EINT4) && (irq <= IRQ_EINT7))
- {
- gpcon_reg = S3C2410_GPFCON;
- extint_reg = S3C24XX_EXTINT0;
- gpcon_offset = (irq - (EXTINT_OFF)) * 2;
- extint_offset = (irq - (EXTINT_OFF)) * 4;
- }
- else if ((irq >= IRQ_EINT8) && (irq <= IRQ_EINT15))
- {
- gpcon_reg = S3C2410_GPGCON;
- extint_reg = S3C24XX_EXTINT1;
- gpcon_offset = (irq - IRQ_EINT8) * 2;
- extint_offset = (irq - IRQ_EINT8) * 4;
- }
- else if ((irq >= IRQ_EINT16) && (irq <= IRQ_EINT23))
- {
- gpcon_reg = S3C2410_GPGCON;
- extint_reg = S3C24XX_EXTINT2;
- gpcon_offset = (irq - IRQ_EINT8) * 2;
- extint_offset = (irq - IRQ_EINT16) * 4;
- } else
- return -1;
-
- /* Set the GPIO to external interrupt mode */
- value = __raw_readl(gpcon_reg);
- value = (value & ~(3 << gpcon_offset)) | (0x02 << gpcon_offset);
- __raw_writel(value, gpcon_reg);
-
- /* Set the external interrupt to pointed trigger type */
- switch (type)
- {
- case IRQT_NOEDGE:
- printk(KERN_WARNING "No edge setting!\n");
- break;
-
- case IRQT_RISING:
- newvalue = S3C2410_EXTINT_RISEEDGE;
- break;
-
- case IRQT_FALLING:
- newvalue = S3C2410_EXTINT_FALLEDGE;
- break;
-
- case IRQT_BOTHEDGE:
- newvalue = S3C2410_EXTINT_BOTHEDGE;
- break;
-
- case IRQT_LOW:
- newvalue = S3C2410_EXTINT_LOWLEV;
- break;
-
- case IRQT_HIGH:
- newvalue = S3C2410_EXTINT_HILEV;
- break;
-
- default:
- printk(KERN_ERR "No such irq type %d", type);
- return -1;
- }
-
- value = __raw_readl(extint_reg);
- value = (value & ~(7 << extint_offset)) | (newvalue << extint_offset);
- __raw_writel(value, extint_reg);
-
- return 0;
-}
-
-static struct irq_chip s3c_irqext_chip = {
- .name = "s3c-ext",
- .mask = s3c_irqext_mask,
- .unmask = s3c_irqext_unmask,
- .ack = s3c_irqext_ack,
- .set_type = s3c_irqext_type,
- .set_wake = s3c_irqext_wake
-};
-
-static struct irq_chip s3c_irq_eint0t4 = {
- .name = "s3c-ext0",
- .ack = s3c_irq_ack,
- .mask = s3c_irq_mask,
- .unmask = s3c_irq_unmask,
- .set_wake = s3c_irq_wake,
- .set_type = s3c_irqext_type,
-};
-
-/* mask values for the parent registers for each of the interrupt types */
-
-#define INTMSK_UART0 (1UL << (IRQ_UART0 - IRQ_EINT0))
-#define INTMSK_UART1 (1UL << (IRQ_UART1 - IRQ_EINT0))
-#define INTMSK_UART2 (1UL << (IRQ_UART2 - IRQ_EINT0))
-#define INTMSK_ADCPARENT (1UL << (IRQ_ADCPARENT - IRQ_EINT0))
-
-
-/* UART0 */
-
-static void
-s3c_irq_uart0_mask(unsigned int irqno)
-{
- s3c_irqsub_mask(irqno, INTMSK_UART0, 7);
-}
-
-static void
-s3c_irq_uart0_unmask(unsigned int irqno)
-{
- s3c_irqsub_unmask(irqno, INTMSK_UART0);
-}
-
-static void
-s3c_irq_uart0_ack(unsigned int irqno)
-{
- s3c_irqsub_maskack(irqno, INTMSK_UART0, 7);
-}
-
-static struct irq_chip s3c_irq_uart0 = {
- .name = "s3c-uart0",
- .mask = s3c_irq_uart0_mask,
- .unmask = s3c_irq_uart0_unmask,
- .ack = s3c_irq_uart0_ack,
-};
-
-/* UART1 */
-
-static void
-s3c_irq_uart1_mask(unsigned int irqno)
-{
- s3c_irqsub_mask(irqno, INTMSK_UART1, 7 << 3);
-}
-
-static void
-s3c_irq_uart1_unmask(unsigned int irqno)
-{
- s3c_irqsub_unmask(irqno, INTMSK_UART1);
-}
-
-static void
-s3c_irq_uart1_ack(unsigned int irqno)
-{
- s3c_irqsub_maskack(irqno, INTMSK_UART1, 7 << 3);
-}
-
-static struct irq_chip s3c_irq_uart1 = {
- .name = "s3c-uart1",
- .mask = s3c_irq_uart1_mask,
- .unmask = s3c_irq_uart1_unmask,
- .ack = s3c_irq_uart1_ack,
-};
-
-/* UART2 */
-
-static void
-s3c_irq_uart2_mask(unsigned int irqno)
-{
- s3c_irqsub_mask(irqno, INTMSK_UART2, 7 << 6);
-}
-
-static void
-s3c_irq_uart2_unmask(unsigned int irqno)
-{
- s3c_irqsub_unmask(irqno, INTMSK_UART2);
-}
-
-static void
-s3c_irq_uart2_ack(unsigned int irqno)
-{
- s3c_irqsub_maskack(irqno, INTMSK_UART2, 7 << 6);
-}
-
-static struct irq_chip s3c_irq_uart2 = {
- .name = "s3c-uart2",
- .mask = s3c_irq_uart2_mask,
- .unmask = s3c_irq_uart2_unmask,
- .ack = s3c_irq_uart2_ack,
-};
-
-/* ADC and Touchscreen */
-
-static void
-s3c_irq_adc_mask(unsigned int irqno)
-{
- s3c_irqsub_mask(irqno, INTMSK_ADCPARENT, 3 << 9);
-}
-
-static void
-s3c_irq_adc_unmask(unsigned int irqno)
-{
- s3c_irqsub_unmask(irqno, INTMSK_ADCPARENT);
-}
-
-static void
-s3c_irq_adc_ack(unsigned int irqno)
-{
- s3c_irqsub_ack(irqno, INTMSK_ADCPARENT, 3 << 9);
-}
-
-static struct irq_chip s3c_irq_adc = {
- .name = "s3c-adc",
- .mask = s3c_irq_adc_mask,
- .unmask = s3c_irq_adc_unmask,
- .ack = s3c_irq_adc_ack,
-};
-
-/* irq demux for adc */
-static void s3c_irq_demux_adc(unsigned int irq,
- struct irq_desc *desc)
-{
- unsigned int subsrc, submsk;
- unsigned int offset = 9;
- struct irq_desc *mydesc;
-
- /* read the current pending interrupts, and the mask
- * for what it is available */
-
- subsrc = __raw_readl(S3C2410_SUBSRCPND);
- submsk = __raw_readl(S3C2410_INTSUBMSK);
-
- subsrc &= ~submsk;
- subsrc >>= offset;
- subsrc &= 3;
-
- if (subsrc != 0) {
- if (subsrc & 1) {
- mydesc = irq_desc + IRQ_TC;
- desc_handle_irq(IRQ_TC, mydesc);
- }
- if (subsrc & 2) {
- mydesc = irq_desc + IRQ_ADC;
- desc_handle_irq(IRQ_ADC, mydesc);
- }
- }
-}
-
-static void s3c_irq_demux_uart(unsigned int start)
-{
- unsigned int subsrc, submsk;
- unsigned int offset = start - IRQ_S3CUART_RX0;
- struct irq_desc *desc;
-
- /* read the current pending interrupts, and the mask
- * for what it is available */
-
- subsrc = __raw_readl(S3C2410_SUBSRCPND);
- submsk = __raw_readl(S3C2410_INTSUBMSK);
-
- irqdbf2("s3c_irq_demux_uart: start=%d (%d), subsrc=0x%08x,0x%08x\n",
- start, offset, subsrc, submsk);
-
- subsrc &= ~submsk;
- subsrc >>= offset;
- subsrc &= 7;
-
- if (subsrc != 0) {
- desc = irq_desc + start;
-
- if (subsrc & 1)
- desc_handle_irq(start, desc);
-
- desc++;
-
- if (subsrc & 2)
- desc_handle_irq(start+1, desc);
-
- desc++;
-
- if (subsrc & 4)
- desc_handle_irq(start+2, desc);
- }
-}
-
-/* uart demux entry points */
-
-static void
-s3c_irq_demux_uart0(unsigned int irq,
- struct irq_desc *desc)
-{
- irq = irq;
- s3c_irq_demux_uart(IRQ_S3CUART_RX0);
-}
-
-static void
-s3c_irq_demux_uart1(unsigned int irq,
- struct irq_desc *desc)
-{
- irq = irq;
- s3c_irq_demux_uart(IRQ_S3CUART_RX1);
-}
-
-static void
-s3c_irq_demux_uart2(unsigned int irq,
- struct irq_desc *desc)
-{
- irq = irq;
- s3c_irq_demux_uart(IRQ_S3CUART_RX2);
-}
-
-static void
-s3c_irq_demux_extint8(unsigned int irq,
- struct irq_desc *desc)
-{
- unsigned long eintpnd = __raw_readl(S3C24XX_EINTPEND);
- unsigned long eintmsk = __raw_readl(S3C24XX_EINTMASK);
-
- eintpnd &= ~eintmsk;
- eintpnd &= ~0xff; /* ignore lower irqs */
-
- /* we may as well handle all the pending IRQs here */
-
- while (eintpnd) {
- irq = __ffs(eintpnd);
- eintpnd &= ~(1<<irq);
-
- irq += (IRQ_EINT4 - 4);
- desc_handle_irq(irq, irq_desc + irq);
- }
-
-}
-
-static void
-s3c_irq_demux_extint4t7(unsigned int irq,
- struct irq_desc *desc)
-{
- unsigned long eintpnd = __raw_readl(S3C24XX_EINTPEND);
- unsigned long eintmsk = __raw_readl(S3C24XX_EINTMASK);
-
- eintpnd &= ~eintmsk;
- eintpnd &= 0xff; /* only lower irqs */
-
- /* we may as well handle all the pending IRQs here */
-
- while (eintpnd) {
- irq = __ffs(eintpnd);
- eintpnd &= ~(1<<irq);
-
- irq += (IRQ_EINT4 - 4);
-
- desc_handle_irq(irq, irq_desc + irq);
- }
-}
-
-#ifdef CONFIG_PM
-
-static struct sleep_save irq_save[] = {
- SAVE_ITEM(S3C2410_INTMSK),
- SAVE_ITEM(S3C2410_INTSUBMSK),
-};
-
-/* the extint values move between the s3c2410/s3c2440 and the s3c2412
- * so we use an array to hold them, and to calculate the address of
- * the register at run-time
-*/
-
-static unsigned long save_extint[3];
-static unsigned long save_eintflt[4];
-static unsigned long save_eintmask;
-
-int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state)
-{
- unsigned int i;
-
- for (i = 0; i < ARRAY_SIZE(save_extint); i++)
- save_extint[i] = __raw_readl(S3C24XX_EXTINT0 + (i*4));
-
- for (i = 0; i < ARRAY_SIZE(save_eintflt); i++)
- save_eintflt[i] = __raw_readl(S3C24XX_EINFLT0 + (i*4));
-
- s3c2410_pm_do_save(irq_save, ARRAY_SIZE(irq_save));
- save_eintmask = __raw_readl(S3C24XX_EINTMASK);
-
- return 0;
-}
-
-int s3c24xx_irq_resume(struct sys_device *dev)
-{
- unsigned int i;
-
- for (i = 0; i < ARRAY_SIZE(save_extint); i++)
- __raw_writel(save_extint[i], S3C24XX_EXTINT0 + (i*4));
-
- for (i = 0; i < ARRAY_SIZE(save_eintflt); i++)
- __raw_writel(save_eintflt[i], S3C24XX_EINFLT0 + (i*4));
-
- s3c2410_pm_do_restore(irq_save, ARRAY_SIZE(irq_save));
- __raw_writel(save_eintmask, S3C24XX_EINTMASK);
-
- return 0;
-}
-
-#else
-#define s3c24xx_irq_suspend NULL
-#define s3c24xx_irq_resume NULL
-#endif
-
-/* s3c24xx_init_irq
- *
- * Initialise S3C2410 IRQ system
-*/
-
-void __init s3c24xx_init_irq(void)
-{
- unsigned long pend;
- unsigned long last;
- int irqno;
- int i;
-
- irqdbf("s3c2410_init_irq: clearing interrupt status flags\n");
-
- /* first, clear all interrupts pending... */
-
- last = 0;
- for (i = 0; i < 4; i++) {
- pend = __raw_readl(S3C24XX_EINTPEND);
-
- if (pend == 0 || pend == last)
- break;
-
- __raw_writel(pend, S3C24XX_EINTPEND);
- printk("irq: clearing pending ext status %08x\n", (int)pend);
- last = pend;
- }
-
- last = 0;
- for (i = 0; i < 4; i++) {
- pend = __raw_readl(S3C2410_INTPND);
-
- if (pend == 0 || pend == last)
- break;
-
- __raw_writel(pend, S3C2410_SRCPND);
- __raw_writel(pend, S3C2410_INTPND);
- printk("irq: clearing pending status %08x\n", (int)pend);
- last = pend;
- }
-
- last = 0;
- for (i = 0; i < 4; i++) {
- pend = __raw_readl(S3C2410_SUBSRCPND);
-
- if (pend == 0 || pend == last)
- break;
-
- printk("irq: clearing subpending status %08x\n", (int)pend);
- __raw_writel(pend, S3C2410_SUBSRCPND);
- last = pend;
- }
-
- /* register the main interrupts */
-
- irqdbf("s3c2410_init_irq: registering s3c2410 interrupt handlers\n");
-
- for (irqno = IRQ_EINT4t7; irqno <= IRQ_ADCPARENT; irqno++) {
- /* set all the s3c2410 internal irqs */
-
- switch (irqno) {
- /* deal with the special IRQs (cascaded) */
-
- case IRQ_EINT4t7:
- case IRQ_EINT8t23:
- case IRQ_UART0:
- case IRQ_UART1:
- case IRQ_UART2:
- case IRQ_ADCPARENT:
- set_irq_chip(irqno, &s3c_irq_level_chip);
- set_irq_handler(irqno, handle_level_irq);
- break;
-
- case IRQ_RESERVED6:
- case IRQ_RESERVED24:
- /* no IRQ here */
- break;
-
- default:
- //irqdbf("registering irq %d (s3c irq)\n", irqno);
- set_irq_chip(irqno, &s3c_irq_chip);
- set_irq_handler(irqno, handle_edge_irq);
- set_irq_flags(irqno, IRQF_VALID);
- }
- }
-
- /* setup the cascade irq handlers */
-
- set_irq_chained_handler(IRQ_EINT4t7, s3c_irq_demux_extint4t7);
- set_irq_chained_handler(IRQ_EINT8t23, s3c_irq_demux_extint8);
-
- set_irq_chained_handler(IRQ_UART0, s3c_irq_demux_uart0);
- set_irq_chained_handler(IRQ_UART1, s3c_irq_demux_uart1);
- set_irq_chained_handler(IRQ_UART2, s3c_irq_demux_uart2);
- set_irq_chained_handler(IRQ_ADCPARENT, s3c_irq_demux_adc);
-
- /* external interrupts */
-
- for (irqno = IRQ_EINT0; irqno <= IRQ_EINT3; irqno++) {
- irqdbf("registering irq %d (ext int)\n", irqno);
- set_irq_chip(irqno, &s3c_irq_eint0t4);
- set_irq_handler(irqno, handle_edge_irq);
- set_irq_flags(irqno, IRQF_VALID);
- }
-
- for (irqno = IRQ_EINT4; irqno <= IRQ_EINT23; irqno++) {
- irqdbf("registering irq %d (extended s3c irq)\n", irqno);
- set_irq_chip(irqno, &s3c_irqext_chip);
- set_irq_handler(irqno, handle_edge_irq);
- set_irq_flags(irqno, IRQF_VALID);
- }
-
- /* register the uart interrupts */
-
- irqdbf("s3c2410: registering external interrupts\n");
-
- for (irqno = IRQ_S3CUART_RX0; irqno <= IRQ_S3CUART_ERR0; irqno++) {
- irqdbf("registering irq %d (s3c uart0 irq)\n", irqno);
- set_irq_chip(irqno, &s3c_irq_uart0);
- set_irq_handler(irqno, handle_level_irq);
- set_irq_flags(irqno, IRQF_VALID);
- }
-
- for (irqno = IRQ_S3CUART_RX1; irqno <= IRQ_S3CUART_ERR1; irqno++) {
- irqdbf("registering irq %d (s3c uart1 irq)\n", irqno);
- set_irq_chip(irqno, &s3c_irq_uart1);
- set_irq_handler(irqno, handle_level_irq);
- set_irq_flags(irqno, IRQF_VALID);
- }
-
- for (irqno = IRQ_S3CUART_RX2; irqno <= IRQ_S3CUART_ERR2; irqno++) {
- irqdbf("registering irq %d (s3c uart2 irq)\n", irqno);
- set_irq_chip(irqno, &s3c_irq_uart2);
- set_irq_handler(irqno, handle_level_irq);
- set_irq_flags(irqno, IRQF_VALID);
- }
-
- for (irqno = IRQ_TC; irqno <= IRQ_ADC; irqno++) {
- irqdbf("registering irq %d (s3c adc irq)\n", irqno);
- set_irq_chip(irqno, &s3c_irq_adc);
- set_irq_handler(irqno, handle_edge_irq);
- set_irq_flags(irqno, IRQF_VALID);
- }
-
- irqdbf("s3c2410: registered interrupt handlers\n");
-}
+arch_initcall(s3c2410_irq_init);
diff --git a/arch/arm/mach-s3c2410/mach-amlm5900.c b/arch/arm/mach-s3c2410/mach-amlm5900.c
index 817e2c6..72f2cc4 100644
--- a/arch/arm/mach-s3c2410/mach-amlm5900.c
+++ b/arch/arm/mach-s3c2410/mach-amlm5900.c
@@ -1,4 +1,4 @@
-/***********************************************************************
+/* linux/arch/arm/mach-s3c2410/mach-amlm5900.c
*
* linux/arch/arm/mach-s3c2410/mach-amlm5900.c
*
@@ -35,7 +35,7 @@
#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/proc_fs.h>
-
+#include <linux/serial_core.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -52,8 +52,8 @@
#include <asm/arch/regs-lcd.h>
#include <asm/arch/regs-gpio.h>
-#include "devs.h"
-#include "cpu.h"
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
#ifdef CONFIG_MTD_PARTITIONS
@@ -113,12 +113,6 @@
#endif
static struct map_desc amlm5900_iodesc[] __initdata = {
- {
- .virtual = (u32)S3C24XX_VA_SPI,
- .pfn = __phys_to_pfn(S3C2410_PA_SPI),
- .length = SZ_1M,
- .type = MT_DEVICE
- }
};
#define UCON S3C2410_UCON_DEFAULT
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index b8b7675..7b81296 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -50,9 +50,9 @@
#include <linux/serial_8250.h>
-#include "clock.h"
-#include "devs.h"
-#include "cpu.h"
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
#include "usb-simtec.h"
#define COPYRIGHT ", (c) 2004-2005 Simtec Electronics"
diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c
index 15b625e..01c60d0 100644
--- a/arch/arm/mach-s3c2410/mach-h1940.c
+++ b/arch/arm/mach-s3c2410/mach-h1940.c
@@ -25,23 +25,24 @@
#include <asm/mach/irq.h>
#include <asm/hardware.h>
-#include <asm/hardware/iomd.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
-
#include <asm/arch/regs-serial.h>
#include <asm/arch/regs-lcd.h>
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-clock.h>
#include <asm/arch/h1940.h>
#include <asm/arch/h1940-latch.h>
#include <asm/arch/fb.h>
+#include <asm/arch/udc.h>
-#include "clock.h"
-#include "devs.h"
-#include "cpu.h"
-#include "pm.h"
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
+#include <asm/plat-s3c24xx/pm.h>
static struct map_desc h1940_iodesc[] __initdata = {
[0] = {
@@ -102,6 +103,32 @@
EXPORT_SYMBOL_GPL(h1940_latch_control);
+static void h1940_udc_pullup(enum s3c2410_udc_cmd_e cmd)
+{
+ printk(KERN_DEBUG "udc: pullup(%d)\n",cmd);
+
+ switch (cmd)
+ {
+ case S3C2410_UDC_P_ENABLE :
+ h1940_latch_control(0, H1940_LATCH_USB_DP);
+ break;
+ case S3C2410_UDC_P_DISABLE :
+ h1940_latch_control(H1940_LATCH_USB_DP, 0);
+ break;
+ case S3C2410_UDC_P_RESET :
+ break;
+ default:
+ break;
+ }
+}
+
+static struct s3c2410_udc_mach_info h1940_udc_cfg __initdata = {
+ .udc_command = h1940_udc_pullup,
+ .vbus_pin = S3C2410_GPG5,
+ .vbus_pin_inverted = 1,
+};
+
+
/**
* Set lcd on or off
@@ -146,12 +173,19 @@
.bpp= {16,16,16},
};
+static struct platform_device s3c_device_leds = {
+ .name = "h1940-leds",
+ .id = -1,
+};
+
static struct platform_device *h1940_devices[] __initdata = {
&s3c_device_usb,
&s3c_device_lcd,
&s3c_device_wdt,
&s3c_device_i2c,
&s3c_device_iis,
+ &s3c_device_usbgadget,
+ &s3c_device_leds,
};
static struct s3c24xx_board h1940_board __initdata = {
@@ -179,7 +213,23 @@
static void __init h1940_init(void)
{
+ u32 tmp;
+
s3c24xx_fb_set_platdata(&h1940_lcdcfg);
+ s3c24xx_udc_set_platdata(&h1940_udc_cfg);
+
+ /* Turn off suspend on both USB ports, and switch the
+ * selectable USB port to USB device mode. */
+
+ s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
+ S3C2410_MISCCR_USBSUSPND0 |
+ S3C2410_MISCCR_USBSUSPND1, 0x0);
+
+ tmp = (
+ 0x78 << S3C2410_PLLCON_MDIVSHIFT)
+ | (0x02 << S3C2410_PLLCON_PDIVSHIFT)
+ | (0x03 << S3C2410_PLLCON_SDIVSHIFT);
+ writel(tmp, S3C2410_UPLLCON);
}
MACHINE_START(H1940, "IPAQ-H1940")
@@ -189,6 +239,6 @@
.boot_params = S3C2410_SDRAM_PA + 0x100,
.map_io = h1940_map_io,
.init_irq = h1940_init_irq,
- .init_machine = h1940_init,
+ .init_machine = h1940_init,
.timer = &s3c24xx_timer,
MACHINE_END
diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c
index 0411e9a..261aa4c 100644
--- a/arch/arm/mach-s3c2410/mach-n30.c
+++ b/arch/arm/mach-s3c2410/mach-n30.c
@@ -29,7 +29,6 @@
#include <asm/mach/irq.h>
#include <asm/hardware.h>
-#include <asm/hardware/iomd.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
@@ -38,10 +37,10 @@
#include <asm/arch/regs-gpio.h>
#include <asm/arch/iic.h>
-#include "s3c2410.h"
-#include "clock.h"
-#include "devs.h"
-#include "cpu.h"
+#include <asm/plat-s3c24xx/s3c2410.h>
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
static struct map_desc n30_iodesc[] __initdata = {
/* nothing here yet */
diff --git a/arch/arm/mach-s3c2410/mach-otom.c b/arch/arm/mach-s3c2410/mach-otom.c
index 2c738b3..c78ab75 100644
--- a/arch/arm/mach-s3c2410/mach-otom.c
+++ b/arch/arm/mach-s3c2410/mach-otom.c
@@ -32,10 +32,10 @@
#include <asm/arch/regs-serial.h>
#include <asm/arch/regs-gpio.h>
-#include "s3c2410.h"
-#include "clock.h"
-#include "devs.h"
-#include "cpu.h"
+#include <asm/plat-s3c24xx/s3c2410.h>
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
static struct map_desc otom11_iodesc[] __initdata = {
/* Device area */
diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c2410/mach-qt2410.c
new file mode 100644
index 0000000..c6a4159
--- /dev/null
+++ b/arch/arm/mach-s3c2410/mach-qt2410.c
@@ -0,0 +1,448 @@
+/* linux/arch/arm/mach-s3c2410/mach-qt2410.c
+ *
+ * Copyright (C) 2006 by OpenMoko, Inc.
+ * Author: Harald Welte <laforge@openmoko.org>
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/serial_core.h>
+#include <linux/mmc/protocol.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_bitbang.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/leds-gpio.h>
+#include <asm/arch/regs-serial.h>
+#include <asm/arch/fb.h>
+#include <asm/arch/nand.h>
+#include <asm/arch/udc.h>
+#include <asm/arch/spi.h>
+#include <asm/arch/spi-gpio.h>
+
+#include <asm/plat-s3c24xx/common-smdk.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
+#include <asm/plat-s3c24xx/pm.h>
+
+static struct map_desc qt2410_iodesc[] __initdata = {
+ { 0xe0000000, __phys_to_pfn(S3C2410_CS3+0x01000000), SZ_1M, MT_DEVICE }
+};
+
+#define UCON S3C2410_UCON_DEFAULT
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg smdk2410_uartcfgs[] = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ }
+};
+
+/* LCD driver info */
+
+/* Configuration for 640x480 SHARP LQ080V3DG01 */
+static struct s3c2410fb_mach_info qt2410_biglcd_cfg __initdata = {
+ .regs = {
+
+ .lcdcon1 = S3C2410_LCDCON1_TFT16BPP |
+ S3C2410_LCDCON1_TFT |
+ S3C2410_LCDCON1_CLKVAL(0x01), /* HCLK/4 */
+
+ .lcdcon2 = S3C2410_LCDCON2_VBPD(18) | /* 19 */
+ S3C2410_LCDCON2_LINEVAL(479) |
+ S3C2410_LCDCON2_VFPD(10) | /* 11 */
+ S3C2410_LCDCON2_VSPW(14), /* 15 */
+
+ .lcdcon3 = S3C2410_LCDCON3_HBPD(43) | /* 44 */
+ S3C2410_LCDCON3_HOZVAL(639) | /* 640 */
+ S3C2410_LCDCON3_HFPD(115), /* 116 */
+
+ .lcdcon4 = S3C2410_LCDCON4_MVAL(0) |
+ S3C2410_LCDCON4_HSPW(95), /* 96 */
+
+ .lcdcon5 = S3C2410_LCDCON5_FRM565 |
+ S3C2410_LCDCON5_INVVLINE |
+ S3C2410_LCDCON5_INVVFRAME |
+ S3C2410_LCDCON5_PWREN |
+ S3C2410_LCDCON5_HWSWP,
+ },
+
+ .lpcsel = ((0xCE6) & ~7) | 1<<4,
+
+ .width = 640,
+ .height = 480,
+
+ .xres = {
+ .min = 640,
+ .max = 640,
+ .defval = 640,
+ },
+
+ .yres = {
+ .min = 480,
+ .max = 480,
+ .defval = 480,
+ },
+
+ .bpp = {
+ .min = 16,
+ .max = 16,
+ .defval = 16,
+ },
+};
+
+/* Configuration for 480x640 toppoly TD028TTEC1 */
+static struct s3c2410fb_mach_info qt2410_prodlcd_cfg __initdata = {
+ .regs = {
+
+ .lcdcon1 = S3C2410_LCDCON1_TFT16BPP |
+ S3C2410_LCDCON1_TFT |
+ S3C2410_LCDCON1_CLKVAL(0x01), /* HCLK/4 */
+
+ .lcdcon2 = S3C2410_LCDCON2_VBPD(1) | /* 2 */
+ S3C2410_LCDCON2_LINEVAL(639) |/* 640 */
+ S3C2410_LCDCON2_VFPD(3) | /* 4 */
+ S3C2410_LCDCON2_VSPW(1), /* 2 */
+
+ .lcdcon3 = S3C2410_LCDCON3_HBPD(7) | /* 8 */
+ S3C2410_LCDCON3_HOZVAL(479) | /* 479 */
+ S3C2410_LCDCON3_HFPD(23), /* 24 */
+
+ .lcdcon4 = S3C2410_LCDCON4_MVAL(0) |
+ S3C2410_LCDCON4_HSPW(7), /* 8 */
+
+ .lcdcon5 = S3C2410_LCDCON5_FRM565 |
+ S3C2410_LCDCON5_INVVLINE |
+ S3C2410_LCDCON5_INVVFRAME |
+ S3C2410_LCDCON5_PWREN |
+ S3C2410_LCDCON5_HWSWP,
+ },
+
+ .lpcsel = ((0xCE6) & ~7) | 1<<4,
+
+ .width = 480,
+ .height = 640,
+
+ .xres = {
+ .min = 480,
+ .max = 480,
+ .defval = 480,
+ },
+
+ .yres = {
+ .min = 640,
+ .max = 640,
+ .defval = 640,
+ },
+
+ .bpp = {
+ .min = 16,
+ .max = 16,
+ .defval = 16,
+ },
+};
+
+/* Config for 240x320 LCD */
+static struct s3c2410fb_mach_info qt2410_lcd_cfg __initdata = {
+ .regs = {
+
+ .lcdcon1 = S3C2410_LCDCON1_TFT16BPP |
+ S3C2410_LCDCON1_TFT |
+ S3C2410_LCDCON1_CLKVAL(0x04),
+
+ .lcdcon2 = S3C2410_LCDCON2_VBPD(1) |
+ S3C2410_LCDCON2_LINEVAL(319) |
+ S3C2410_LCDCON2_VFPD(6) |
+ S3C2410_LCDCON2_VSPW(3),
+
+ .lcdcon3 = S3C2410_LCDCON3_HBPD(12) |
+ S3C2410_LCDCON3_HOZVAL(239) |
+ S3C2410_LCDCON3_HFPD(7),
+
+ .lcdcon4 = S3C2410_LCDCON4_MVAL(0) |
+ S3C2410_LCDCON4_HSPW(3),
+
+ .lcdcon5 = S3C2410_LCDCON5_FRM565 |
+ S3C2410_LCDCON5_INVVLINE |
+ S3C2410_LCDCON5_INVVFRAME |
+ S3C2410_LCDCON5_PWREN |
+ S3C2410_LCDCON5_HWSWP,
+ },
+
+ .lpcsel = ((0xCE6) & ~7) | 1<<4,
+
+ .width = 240,
+ .height = 320,
+
+ .xres = {
+ .min = 240,
+ .max = 240,
+ .defval = 240,
+ },
+
+ .yres = {
+ .min = 320,
+ .max = 320,
+ .defval = 320,
+ },
+
+ .bpp = {
+ .min = 16,
+ .max = 16,
+ .defval = 16,
+ },
+};
+
+/* CS8900 */
+
+static struct resource qt2410_cs89x0_resources[] = {
+ [0] = {
+ .start = 0x19000000,
+ .end = 0x19000000 + 16,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_EINT9,
+ .end = IRQ_EINT9,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device qt2410_cs89x0 = {
+ .name = "cirrus-cs89x0",
+ .num_resources = ARRAY_SIZE(qt2410_cs89x0_resources),
+ .resource = qt2410_cs89x0_resources,
+};
+
+/* LED */
+
+static struct s3c24xx_led_platdata qt2410_pdata_led = {
+ .gpio = S3C2410_GPB0,
+ .flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
+ .name = "led",
+ .def_trigger = "timer",
+};
+
+static struct platform_device qt2410_led = {
+ .name = "s3c24xx_led",
+ .id = 0,
+ .dev = {
+ .platform_data = &qt2410_pdata_led,
+ },
+};
+
+/* SPI */
+
+static void spi_gpio_cs(struct s3c2410_spigpio_info *spi, int cs)
+{
+ switch (cs) {
+ case BITBANG_CS_ACTIVE:
+ s3c2410_gpio_setpin(S3C2410_GPB5, 0);
+ break;
+ case BITBANG_CS_INACTIVE:
+ s3c2410_gpio_setpin(S3C2410_GPB5, 1);
+ break;
+ }
+}
+
+static struct s3c2410_spigpio_info spi_gpio_cfg = {
+ .pin_clk = S3C2410_GPG7,
+ .pin_mosi = S3C2410_GPG6,
+ .pin_miso = S3C2410_GPG5,
+ .chip_select = &spi_gpio_cs,
+};
+
+
+static struct platform_device qt2410_spi = {
+ .name = "s3c24xx-spi-gpio",
+ .id = 1,
+ .dev = {
+ .platform_data = &spi_gpio_cfg,
+ },
+};
+
+/* Board devices */
+
+static struct platform_device *qt2410_devices[] __initdata = {
+ &s3c_device_usb,
+ &s3c_device_lcd,
+ &s3c_device_wdt,
+ &s3c_device_i2c,
+ &s3c_device_iis,
+ &s3c_device_sdi,
+ &s3c_device_usbgadget,
+ &qt2410_spi,
+ &qt2410_cs89x0,
+ &qt2410_led,
+};
+
+static struct s3c24xx_board qt2410_board __initdata = {
+ .devices = qt2410_devices,
+ .devices_count = ARRAY_SIZE(qt2410_devices)
+};
+
+static struct mtd_partition qt2410_nand_part[] = {
+ [0] = {
+ .name = "U-Boot",
+ .size = 0x30000,
+ .offset = 0,
+ },
+ [1] = {
+ .name = "U-Boot environment",
+ .offset = 0x30000,
+ .size = 0x4000,
+ },
+ [2] = {
+ .name = "kernel",
+ .offset = 0x34000,
+ .size = SZ_2M,
+ },
+ [3] = {
+ .name = "initrd",
+ .offset = 0x234000,
+ .size = SZ_4M,
+ },
+ [4] = {
+ .name = "jffs2",
+ .offset = 0x634000,
+ .size = 0x39cc000,
+ },
+};
+
+static struct s3c2410_nand_set qt2410_nand_sets[] = {
+ [0] = {
+ .name = "NAND",
+ .nr_chips = 1,
+ .nr_partitions = ARRAY_SIZE(qt2410_nand_part),
+ .partitions = qt2410_nand_part,
+ },
+};
+
+/* choose a set of timings which should suit most 512Mbit
+ * chips and beyond.
+ */
+
+static struct s3c2410_platform_nand qt2410_nand_info = {
+ .tacls = 20,
+ .twrph0 = 60,
+ .twrph1 = 20,
+ .nr_sets = ARRAY_SIZE(qt2410_nand_sets),
+ .sets = qt2410_nand_sets,
+};
+
+/* UDC */
+
+static struct s3c2410_udc_mach_info qt2410_udc_cfg = {
+};
+
+static char tft_type = 's';
+
+static int __init qt2410_tft_setup(char *str)
+{
+ tft_type = str[0];
+ return 1;
+}
+
+__setup("tft=", qt2410_tft_setup);
+
+static void __init qt2410_map_io(void)
+{
+ s3c24xx_init_io(qt2410_iodesc, ARRAY_SIZE(qt2410_iodesc));
+ s3c24xx_init_clocks(12*1000*1000);
+ s3c24xx_init_uarts(smdk2410_uartcfgs, ARRAY_SIZE(smdk2410_uartcfgs));
+ s3c24xx_set_board(&qt2410_board);
+}
+
+static void __init qt2410_machine_init(void)
+{
+ s3c_device_nand.dev.platform_data = &qt2410_nand_info;
+
+ switch (tft_type) {
+ case 'p': /* production */
+ s3c24xx_fb_set_platdata(&qt2410_prodlcd_cfg);
+ break;
+ case 'b': /* big */
+ s3c24xx_fb_set_platdata(&qt2410_biglcd_cfg);
+ break;
+ case 's': /* small */
+ default:
+ s3c24xx_fb_set_platdata(&qt2410_lcd_cfg);
+ break;
+ }
+
+ s3c2410_gpio_cfgpin(S3C2410_GPB0, S3C2410_GPIO_OUTPUT);
+ s3c2410_gpio_setpin(S3C2410_GPB0, 1);
+
+ s3c24xx_udc_set_platdata(&qt2410_udc_cfg);
+
+ s3c2410_gpio_cfgpin(S3C2410_GPB5, S3C2410_GPIO_OUTPUT);
+
+ s3c2410_pm_init();
+}
+
+MACHINE_START(QT2410, "QT2410")
+ .phys_io = S3C2410_PA_UART,
+ .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
+ .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .map_io = qt2410_map_io,
+ .init_irq = s3c24xx_init_irq,
+ .init_machine = qt2410_machine_init,
+ .timer = &s3c24xx_timer,
+MACHINE_END
+
+
diff --git a/arch/arm/mach-s3c2410/mach-smdk2410.c b/arch/arm/mach-s3c2410/mach-smdk2410.c
index 01c0c98..57b8a80 100644
--- a/arch/arm/mach-s3c2410/mach-smdk2410.c
+++ b/arch/arm/mach-s3c2410/mach-smdk2410.c
@@ -1,4 +1,4 @@
-/***********************************************************************
+/* linux/arch/arm/mach-s3c2410/mach-smdk2410.c
*
* linux/arch/arm/mach-s3c2410/mach-smdk2410.c
*
@@ -49,10 +49,10 @@
#include <asm/arch/regs-serial.h>
-#include "devs.h"
-#include "cpu.h"
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
-#include "common-smdk.h"
+#include <asm/plat-s3c24xx/common-smdk.h>
static struct map_desc smdk2410_iodesc[] __initdata = {
/* nothing here yet */
diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c
index a382fc0..c947c75 100644
--- a/arch/arm/mach-s3c2410/mach-vr1000.c
+++ b/arch/arm/mach-s3c2410/mach-vr1000.c
@@ -43,9 +43,9 @@
#include <asm/arch/regs-gpio.h>
#include <asm/arch/leds-gpio.h>
-#include "clock.h"
-#include "devs.h"
-#include "cpu.h"
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
#include "usb-simtec.h"
/* macros for virtual address mods for the io space entries */
diff --git a/arch/arm/mach-s3c2410/pm.c b/arch/arm/mach-s3c2410/pm.c
index ebf294d..3b3a7db 100644
--- a/arch/arm/mach-s3c2410/pm.c
+++ b/arch/arm/mach-s3c2410/pm.c
@@ -1,11 +1,9 @@
/* linux/arch/arm/mach-s3c2410/pm.c
*
- * Copyright (c) 2004,2006 Simtec Electronics
+ * Copyright (c) 2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
- * S3C24XX Power Manager (Suspend-To-RAM) support
- *
- * See Documentation/arm/Samsung-S3C24XX/Suspend.txt for more information
+ * S3C2410 (and compatible) Power Manager (Suspend-To-RAM) support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -20,640 +18,139 @@
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * Parts based on arch/arm/mach-pxa/pm.c
- *
- * Thanks to Dimitry Andric for debugging
*/
#include <linux/init.h>
#include <linux/suspend.h>
#include <linux/errno.h>
#include <linux/time.h>
-#include <linux/interrupt.h>
-#include <linux/crc32.h>
-#include <linux/ioport.h>
-#include <linux/delay.h>
-#include <linux/serial_core.h>
+#include <linux/sysdev.h>
-#include <asm/cacheflush.h>
#include <asm/hardware.h>
#include <asm/io.h>
-#include <asm/arch/regs-serial.h>
-#include <asm/arch/regs-clock.h>
+#include <asm/mach-types.h>
+
#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-mem.h>
-#include <asm/arch/regs-irq.h>
+#include <asm/arch/h1940.h>
-#include <asm/mach/time.h>
-
-#include "pm.h"
-
-/* for external use */
-
-unsigned long s3c_pm_flags;
-
-#define PFX "s3c24xx-pm: "
-
-static struct sleep_save core_save[] = {
- SAVE_ITEM(S3C2410_LOCKTIME),
- SAVE_ITEM(S3C2410_CLKCON),
-
- /* we restore the timings here, with the proviso that the board
- * brings the system up in an slower, or equal frequency setting
- * to the original system.
- *
- * if we cannot guarantee this, then things are going to go very
- * wrong here, as we modify the refresh and both pll settings.
- */
-
- SAVE_ITEM(S3C2410_BWSCON),
- SAVE_ITEM(S3C2410_BANKCON0),
- SAVE_ITEM(S3C2410_BANKCON1),
- SAVE_ITEM(S3C2410_BANKCON2),
- SAVE_ITEM(S3C2410_BANKCON3),
- SAVE_ITEM(S3C2410_BANKCON4),
- SAVE_ITEM(S3C2410_BANKCON5),
-
- SAVE_ITEM(S3C2410_CLKDIVN),
- SAVE_ITEM(S3C2410_MPLLCON),
- SAVE_ITEM(S3C2410_UPLLCON),
- SAVE_ITEM(S3C2410_CLKSLOW),
- SAVE_ITEM(S3C2410_REFRESH),
-};
-
-static struct sleep_save gpio_save[] = {
- SAVE_ITEM(S3C2410_GPACON),
- SAVE_ITEM(S3C2410_GPADAT),
-
- SAVE_ITEM(S3C2410_GPBCON),
- SAVE_ITEM(S3C2410_GPBDAT),
- SAVE_ITEM(S3C2410_GPBUP),
-
- SAVE_ITEM(S3C2410_GPCCON),
- SAVE_ITEM(S3C2410_GPCDAT),
- SAVE_ITEM(S3C2410_GPCUP),
-
- SAVE_ITEM(S3C2410_GPDCON),
- SAVE_ITEM(S3C2410_GPDDAT),
- SAVE_ITEM(S3C2410_GPDUP),
-
- SAVE_ITEM(S3C2410_GPECON),
- SAVE_ITEM(S3C2410_GPEDAT),
- SAVE_ITEM(S3C2410_GPEUP),
-
- SAVE_ITEM(S3C2410_GPFCON),
- SAVE_ITEM(S3C2410_GPFDAT),
- SAVE_ITEM(S3C2410_GPFUP),
-
- SAVE_ITEM(S3C2410_GPGCON),
- SAVE_ITEM(S3C2410_GPGDAT),
- SAVE_ITEM(S3C2410_GPGUP),
-
- SAVE_ITEM(S3C2410_GPHCON),
- SAVE_ITEM(S3C2410_GPHDAT),
- SAVE_ITEM(S3C2410_GPHUP),
-
- SAVE_ITEM(S3C2410_DCLKCON),
-};
+#include <asm/plat-s3c24xx/cpu.h>
+#include <asm/plat-s3c24xx/pm.h>
#ifdef CONFIG_S3C2410_PM_DEBUG
-
-#define SAVE_UART(va) \
- SAVE_ITEM((va) + S3C2410_ULCON), \
- SAVE_ITEM((va) + S3C2410_UCON), \
- SAVE_ITEM((va) + S3C2410_UFCON), \
- SAVE_ITEM((va) + S3C2410_UMCON), \
- SAVE_ITEM((va) + S3C2410_UBRDIV)
-
-static struct sleep_save uart_save[] = {
- SAVE_UART(S3C24XX_VA_UART0),
- SAVE_UART(S3C24XX_VA_UART1),
-#ifndef CONFIG_CPU_S3C2400
- SAVE_UART(S3C24XX_VA_UART2),
-#endif
-};
-
-/* debug
- *
- * we send the debug to printascii() to allow it to be seen if the
- * system never wakes up from the sleep
-*/
-
-extern void printascii(const char *);
-
-void pm_dbg(const char *fmt, ...)
-{
- va_list va;
- char buff[256];
-
- va_start(va, fmt);
- vsprintf(buff, fmt, va);
- va_end(va);
-
- printascii(buff);
-}
-
-static void s3c2410_pm_debug_init(void)
-{
- unsigned long tmp = __raw_readl(S3C2410_CLKCON);
-
- /* re-start uart clocks */
- tmp |= S3C2410_CLKCON_UART0;
- tmp |= S3C2410_CLKCON_UART1;
- tmp |= S3C2410_CLKCON_UART2;
-
- __raw_writel(tmp, S3C2410_CLKCON);
- udelay(10);
-}
-
+extern void pm_dbg(const char *fmt, ...);
#define DBG(fmt...) pm_dbg(fmt)
#else
#define DBG(fmt...) printk(KERN_DEBUG fmt)
-
-#define s3c2410_pm_debug_init() do { } while(0)
-
-static struct sleep_save uart_save[] = {};
#endif
-#if defined(CONFIG_S3C2410_PM_CHECK) && CONFIG_S3C2410_PM_CHECK_CHUNKSIZE != 0
-
-/* suspend checking code...
- *
- * this next area does a set of crc checks over all the installed
- * memory, so the system can verify if the resume was ok.
- *
- * CONFIG_S3C2410_PM_CHECK_CHUNKSIZE defines the block-size for the CRC,
- * increasing it will mean that the area corrupted will be less easy to spot,
- * and reducing the size will cause the CRC save area to grow
-*/
-
-#define CHECK_CHUNKSIZE (CONFIG_S3C2410_PM_CHECK_CHUNKSIZE * 1024)
-
-static u32 crc_size; /* size needed for the crc block */
-static u32 *crcs; /* allocated over suspend/resume */
-
-typedef u32 *(run_fn_t)(struct resource *ptr, u32 *arg);
-
-/* s3c2410_pm_run_res
- *
- * go thorugh the given resource list, and look for system ram
-*/
-
-static void s3c2410_pm_run_res(struct resource *ptr, run_fn_t fn, u32 *arg)
+static void s3c2410_pm_prepare(void)
{
- while (ptr != NULL) {
- if (ptr->child != NULL)
- s3c2410_pm_run_res(ptr->child, fn, arg);
+ /* ensure at least GSTATUS3 has the resume address */
- if ((ptr->flags & IORESOURCE_MEM) &&
- strcmp(ptr->name, "System RAM") == 0) {
- DBG("Found system RAM at %08lx..%08lx\n",
- ptr->start, ptr->end);
- arg = (fn)(ptr, arg);
- }
+ __raw_writel(virt_to_phys(s3c2410_cpu_resume), S3C2410_GSTATUS3);
- ptr = ptr->sibling;
- }
-}
+ DBG("GSTATUS3 0x%08x\n", __raw_readl(S3C2410_GSTATUS3));
+ DBG("GSTATUS4 0x%08x\n", __raw_readl(S3C2410_GSTATUS4));
-static void s3c2410_pm_run_sysram(run_fn_t fn, u32 *arg)
-{
- s3c2410_pm_run_res(&iomem_resource, fn, arg);
-}
+ if (machine_is_h1940()) {
+ void *base = phys_to_virt(H1940_SUSPEND_CHECK);
+ unsigned long ptr;
+ unsigned long calc = 0;
-static u32 *s3c2410_pm_countram(struct resource *res, u32 *val)
-{
- u32 size = (u32)(res->end - res->start)+1;
+ /* generate check for the bootloader to check on resume */
- size += CHECK_CHUNKSIZE-1;
- size /= CHECK_CHUNKSIZE;
+ for (ptr = 0; ptr < 0x40000; ptr += 0x400)
+ calc += __raw_readl(base+ptr);
- DBG("Area %08lx..%08lx, %d blocks\n", res->start, res->end, size);
-
- *val += size * sizeof(u32);
- return val;
-}
-
-/* s3c2410_pm_prepare_check
- *
- * prepare the necessary information for creating the CRCs. This
- * must be done before the final save, as it will require memory
- * allocating, and thus touching bits of the kernel we do not
- * know about.
-*/
-
-static void s3c2410_pm_check_prepare(void)
-{
- crc_size = 0;
-
- s3c2410_pm_run_sysram(s3c2410_pm_countram, &crc_size);
-
- DBG("s3c2410_pm_prepare_check: %u checks needed\n", crc_size);
-
- crcs = kmalloc(crc_size+4, GFP_KERNEL);
- if (crcs == NULL)
- printk(KERN_ERR "Cannot allocated CRC save area\n");
-}
-
-static u32 *s3c2410_pm_makecheck(struct resource *res, u32 *val)
-{
- unsigned long addr, left;
-
- for (addr = res->start; addr < res->end;
- addr += CHECK_CHUNKSIZE) {
- left = res->end - addr;
-
- if (left > CHECK_CHUNKSIZE)
- left = CHECK_CHUNKSIZE;
-
- *val = crc32_le(~0, phys_to_virt(addr), left);
- val++;
+ __raw_writel(calc, phys_to_virt(H1940_SUSPEND_CHECKSUM));
}
- return val;
+ /* the RX3715 uses similar code and the same H1940 and the
+ * same offsets for resume and checksum pointers */
+
+ if (machine_is_rx3715()) {
+ void *base = phys_to_virt(H1940_SUSPEND_CHECK);
+ unsigned long ptr;
+ unsigned long calc = 0;
+
+ /* generate check for the bootloader to check on resume */
+
+ for (ptr = 0; ptr < 0x40000; ptr += 0x4)
+ calc += __raw_readl(base+ptr);
+
+ __raw_writel(calc, phys_to_virt(H1940_SUSPEND_CHECKSUM));
+ }
+
+ if ( machine_is_aml_m5900() )
+ s3c2410_gpio_setpin(S3C2410_GPF2, 1);
+
}
-/* s3c2410_pm_check_store
- *
- * compute the CRC values for the memory blocks before the final
- * sleep.
-*/
-
-static void s3c2410_pm_check_store(void)
+static int s3c2410_pm_resume(struct sys_device *dev)
{
- if (crcs != NULL)
- s3c2410_pm_run_sysram(s3c2410_pm_makecheck, crcs);
-}
+ unsigned long tmp;
-/* in_region
- *
- * return TRUE if the area defined by ptr..ptr+size contatins the
- * what..what+whatsz
-*/
+ /* unset the return-from-sleep flag, to ensure reset */
-static inline int in_region(void *ptr, int size, void *what, size_t whatsz)
-{
- if ((what+whatsz) < ptr)
- return 0;
+ tmp = __raw_readl(S3C2410_GSTATUS2);
+ tmp &= S3C2410_GSTATUS2_OFFRESET;
+ __raw_writel(tmp, S3C2410_GSTATUS2);
- if (what > (ptr+size))
- return 0;
-
- return 1;
-}
-
-static u32 *s3c2410_pm_runcheck(struct resource *res, u32 *val)
-{
- void *save_at = phys_to_virt(s3c2410_sleep_save_phys);
- unsigned long addr;
- unsigned long left;
- void *ptr;
- u32 calc;
-
- for (addr = res->start; addr < res->end;
- addr += CHECK_CHUNKSIZE) {
- left = res->end - addr;
-
- if (left > CHECK_CHUNKSIZE)
- left = CHECK_CHUNKSIZE;
-
- ptr = phys_to_virt(addr);
-
- if (in_region(ptr, left, crcs, crc_size)) {
- DBG("skipping %08lx, has crc block in\n", addr);
- goto skip_check;
- }
-
- if (in_region(ptr, left, save_at, 32*4 )) {
- DBG("skipping %08lx, has save block in\n", addr);
- goto skip_check;
- }
-
- /* calculate and check the checksum */
-
- calc = crc32_le(~0, ptr, left);
- if (calc != *val) {
- printk(KERN_ERR PFX "Restore CRC error at "
- "%08lx (%08x vs %08x)\n", addr, calc, *val);
-
- DBG("Restore CRC error at %08lx (%08x vs %08x)\n",
- addr, calc, *val);
- }
-
- skip_check:
- val++;
- }
-
- return val;
-}
-
-/* s3c2410_pm_check_restore
- *
- * check the CRCs after the restore event and free the memory used
- * to hold them
-*/
-
-static void s3c2410_pm_check_restore(void)
-{
- if (crcs != NULL) {
- s3c2410_pm_run_sysram(s3c2410_pm_runcheck, crcs);
- kfree(crcs);
- crcs = NULL;
- }
-}
-
-#else
-
-#define s3c2410_pm_check_prepare() do { } while(0)
-#define s3c2410_pm_check_restore() do { } while(0)
-#define s3c2410_pm_check_store() do { } while(0)
-#endif
-
-/* helper functions to save and restore register state */
-
-void s3c2410_pm_do_save(struct sleep_save *ptr, int count)
-{
- for (; count > 0; count--, ptr++) {
- ptr->val = __raw_readl(ptr->reg);
- DBG("saved %p value %08lx\n", ptr->reg, ptr->val);
- }
-}
-
-/* s3c2410_pm_do_restore
- *
- * restore the system from the given list of saved registers
- *
- * Note, we do not use DBG() in here, as the system may not have
- * restore the UARTs state yet
-*/
-
-void s3c2410_pm_do_restore(struct sleep_save *ptr, int count)
-{
- for (; count > 0; count--, ptr++) {
- printk(KERN_DEBUG "restore %p (restore %08lx, was %08x)\n",
- ptr->reg, ptr->val, __raw_readl(ptr->reg));
-
- __raw_writel(ptr->val, ptr->reg);
- }
-}
-
-/* s3c2410_pm_do_restore_core
- *
- * similar to s3c2410_pm_do_restore_core
- *
- * WARNING: Do not put any debug in here that may effect memory or use
- * peripherals, as things may be changing!
-*/
-
-static void s3c2410_pm_do_restore_core(struct sleep_save *ptr, int count)
-{
- for (; count > 0; count--, ptr++) {
- __raw_writel(ptr->val, ptr->reg);
- }
-}
-
-/* s3c2410_pm_show_resume_irqs
- *
- * print any IRQs asserted at resume time (ie, we woke from)
-*/
-
-static void s3c2410_pm_show_resume_irqs(int start, unsigned long which,
- unsigned long mask)
-{
- int i;
-
- which &= ~mask;
-
- for (i = 0; i <= 31; i++) {
- if ((which) & (1L<<i)) {
- DBG("IRQ %d asserted at resume\n", start+i);
- }
- }
-}
-
-/* s3c2410_pm_check_resume_pin
- *
- * check to see if the pin is configured correctly for sleep mode, and
- * make any necessary adjustments if it is not
-*/
-
-static void s3c2410_pm_check_resume_pin(unsigned int pin, unsigned int irqoffs)
-{
- unsigned long irqstate;
- unsigned long pinstate;
- int irq = s3c2410_gpio_getirq(pin);
-
- if (irqoffs < 4)
- irqstate = s3c_irqwake_intmask & (1L<<irqoffs);
- else
- irqstate = s3c_irqwake_eintmask & (1L<<irqoffs);
-
- pinstate = s3c2410_gpio_getcfg(pin);
-
- if (!irqstate) {
- if (pinstate == S3C2410_GPIO_IRQ)
- DBG("Leaving IRQ %d (pin %d) enabled\n", irq, pin);
- } else {
- if (pinstate == S3C2410_GPIO_IRQ) {
- DBG("Disabling IRQ %d (pin %d)\n", irq, pin);
- s3c2410_gpio_cfgpin(pin, S3C2410_GPIO_INPUT);
- }
- }
-}
-
-/* s3c2410_pm_configure_extint
- *
- * configure all external interrupt pins
-*/
-
-static void s3c2410_pm_configure_extint(void)
-{
- int pin;
-
- /* for each of the external interrupts (EINT0..EINT15) we
- * need to check wether it is an external interrupt source,
- * and then configure it as an input if it is not
- */
-
- for (pin = S3C2410_GPF0; pin <= S3C2410_GPF7; pin++) {
- s3c2410_pm_check_resume_pin(pin, pin - S3C2410_GPF0);
- }
-
- for (pin = S3C2410_GPG0; pin <= S3C2410_GPG7; pin++) {
- s3c2410_pm_check_resume_pin(pin, (pin - S3C2410_GPG0)+8);
- }
-}
-
-void (*pm_cpu_prep)(void);
-void (*pm_cpu_sleep)(void);
-
-#define any_allowed(mask, allow) (((mask) & (allow)) != (allow))
-
-/* s3c2410_pm_enter
- *
- * central control for sleep/resume process
-*/
-
-static int s3c2410_pm_enter(suspend_state_t state)
-{
- unsigned long regs_save[16];
-
- /* ensure the debug is initialised (if enabled) */
-
- s3c2410_pm_debug_init();
-
- DBG("s3c2410_pm_enter(%d)\n", state);
-
- if (pm_cpu_prep == NULL || pm_cpu_sleep == NULL) {
- printk(KERN_ERR PFX "error: no cpu sleep functions set\n");
- return -EINVAL;
- }
-
- if (state != PM_SUSPEND_MEM) {
- printk(KERN_ERR PFX "error: only PM_SUSPEND_MEM supported\n");
- return -EINVAL;
- }
-
- /* check if we have anything to wake-up with... bad things seem
- * to happen if you suspend with no wakeup (system will often
- * require a full power-cycle)
- */
-
- if (!any_allowed(s3c_irqwake_intmask, s3c_irqwake_intallow) &&
- !any_allowed(s3c_irqwake_eintmask, s3c_irqwake_eintallow)) {
- printk(KERN_ERR PFX "No sources enabled for wake-up!\n");
- printk(KERN_ERR PFX "Aborting sleep\n");
- return -EINVAL;
- }
-
- /* prepare check area if configured */
-
- s3c2410_pm_check_prepare();
-
- /* store the physical address of the register recovery block */
-
- s3c2410_sleep_save_phys = virt_to_phys(regs_save);
-
- DBG("s3c2410_sleep_save_phys=0x%08lx\n", s3c2410_sleep_save_phys);
-
- /* save all necessary core registers not covered by the drivers */
-
- s3c2410_pm_do_save(gpio_save, ARRAY_SIZE(gpio_save));
- s3c2410_pm_do_save(core_save, ARRAY_SIZE(core_save));
- s3c2410_pm_do_save(uart_save, ARRAY_SIZE(uart_save));
-
- /* set the irq configuration for wake */
-
- s3c2410_pm_configure_extint();
-
- DBG("sleep: irq wakeup masks: %08lx,%08lx\n",
- s3c_irqwake_intmask, s3c_irqwake_eintmask);
-
- __raw_writel(s3c_irqwake_intmask, S3C2410_INTMSK);
- __raw_writel(s3c_irqwake_eintmask, S3C2410_EINTMASK);
-
- /* ack any outstanding external interrupts before we go to sleep */
-
- __raw_writel(__raw_readl(S3C2410_EINTPEND), S3C2410_EINTPEND);
- __raw_writel(__raw_readl(S3C2410_INTPND), S3C2410_INTPND);
- __raw_writel(__raw_readl(S3C2410_SRCPND), S3C2410_SRCPND);
-
- /* call cpu specific preperation */
-
- pm_cpu_prep();
-
- /* flush cache back to ram */
-
- flush_cache_all();
-
- s3c2410_pm_check_store();
-
- /* send the cpu to sleep... */
-
- __raw_writel(0x00, S3C2410_CLKCON); /* turn off clocks over sleep */
-
- /* s3c2410_cpu_save will also act as our return point from when
- * we resume as it saves its own register state, so use the return
- * code to differentiate return from save and return from sleep */
-
- if (s3c2410_cpu_save(regs_save) == 0) {
- flush_cache_all();
- pm_cpu_sleep();
- }
-
- /* restore the cpu state */
-
- cpu_init();
-
- /* restore the system state */
-
- s3c2410_pm_do_restore_core(core_save, ARRAY_SIZE(core_save));
- s3c2410_pm_do_restore(gpio_save, ARRAY_SIZE(gpio_save));
- s3c2410_pm_do_restore(uart_save, ARRAY_SIZE(uart_save));
-
- s3c2410_pm_debug_init();
-
- /* check what irq (if any) restored the system */
-
- DBG("post sleep: IRQs 0x%08x, 0x%08x\n",
- __raw_readl(S3C2410_SRCPND),
- __raw_readl(S3C2410_EINTPEND));
-
- s3c2410_pm_show_resume_irqs(IRQ_EINT0, __raw_readl(S3C2410_SRCPND),
- s3c_irqwake_intmask);
-
- s3c2410_pm_show_resume_irqs(IRQ_EINT4-4, __raw_readl(S3C2410_EINTPEND),
- s3c_irqwake_eintmask);
-
- DBG("post sleep, preparing to return\n");
-
- s3c2410_pm_check_restore();
-
- /* ok, let's return from sleep */
+ if ( machine_is_aml_m5900() )
+ s3c2410_gpio_setpin(S3C2410_GPF2, 0);
- DBG("S3C2410 PM Resume (post-restore)\n");
return 0;
}
-/*
- * Called after processes are frozen, but before we shut down devices.
- */
-static int s3c2410_pm_prepare(suspend_state_t state)
+static int s3c2410_pm_add(struct sys_device *dev)
{
+ pm_cpu_prep = s3c2410_pm_prepare;
+ pm_cpu_sleep = s3c2410_cpu_suspend;
+
return 0;
}
-/*
- * Called after devices are re-setup, but before processes are thawed.
- */
-static int s3c2410_pm_finish(suspend_state_t state)
-{
- return 0;
-}
-
-/*
- * Set to PM_DISK_FIRMWARE so we can quickly veto suspend-to-disk.
- */
-static struct pm_ops s3c2410_pm_ops = {
- .pm_disk_mode = PM_DISK_FIRMWARE,
- .prepare = s3c2410_pm_prepare,
- .enter = s3c2410_pm_enter,
- .finish = s3c2410_pm_finish,
+#if defined(CONFIG_CPU_S3C2410)
+static struct sysdev_driver s3c2410_pm_driver = {
+ .add = s3c2410_pm_add,
+ .resume = s3c2410_pm_resume,
};
-/* s3c2410_pm_init
- *
- * Attach the power management functions. This should be called
- * from the board specific initialisation if the board supports
- * it.
-*/
+/* register ourselves */
-int __init s3c2410_pm_init(void)
+static int __init s3c2410_pm_drvinit(void)
{
- printk("S3C2410 Power Management, (c) 2004 Simtec Electronics\n");
-
- pm_set_ops(&s3c2410_pm_ops);
- return 0;
+ return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_pm_driver);
}
+
+arch_initcall(s3c2410_pm_drvinit);
+#endif
+
+#if defined(CONFIG_CPU_S3C2440)
+static struct sysdev_driver s3c2440_pm_driver = {
+ .add = s3c2410_pm_add,
+ .resume = s3c2410_pm_resume,
+};
+
+static int __init s3c2440_pm_drvinit(void)
+{
+ return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_pm_driver);
+}
+
+arch_initcall(s3c2440_pm_drvinit);
+#endif
+
+#if defined(CONFIG_CPU_S3C2442)
+static struct sysdev_driver s3c2442_pm_driver = {
+ .add = s3c2410_pm_add,
+ .resume = s3c2410_pm_resume,
+};
+
+static int __init s3c2442_pm_drvinit(void)
+{
+ return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_pm_driver);
+}
+
+arch_initcall(s3c2442_pm_drvinit);
+#endif
diff --git a/arch/arm/mach-s3c2410/s3c2410-clock.c b/arch/arm/mach-s3c2410/s3c2410-clock.c
deleted file mode 100644
index 992cc6a..0000000
--- a/arch/arm/mach-s3c2410/s3c2410-clock.c
+++ /dev/null
@@ -1,276 +0,0 @@
-/* linux/arch/arm/mach-s3c2410/s3c2410-clock.c
- *
- * Copyright (c) 2006 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410,S3C2440,S3C2442 Clock control support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/sysdev.h>
-#include <linux/clk.h>
-#include <linux/mutex.h>
-#include <linux/delay.h>
-#include <linux/serial_core.h>
-
-#include <asm/mach/map.h>
-
-#include <asm/hardware.h>
-#include <asm/io.h>
-
-#include <asm/arch/regs-serial.h>
-#include <asm/arch/regs-clock.h>
-#include <asm/arch/regs-gpio.h>
-
-#include "s3c2410.h"
-#include "clock.h"
-#include "cpu.h"
-
-int s3c2410_clkcon_enable(struct clk *clk, int enable)
-{
- unsigned int clocks = clk->ctrlbit;
- unsigned long clkcon;
-
- clkcon = __raw_readl(S3C2410_CLKCON);
-
- if (enable)
- clkcon |= clocks;
- else
- clkcon &= ~clocks;
-
- /* ensure none of the special function bits set */
- clkcon &= ~(S3C2410_CLKCON_IDLE|S3C2410_CLKCON_POWER);
-
- __raw_writel(clkcon, S3C2410_CLKCON);
-
- return 0;
-}
-
-static int s3c2410_upll_enable(struct clk *clk, int enable)
-{
- unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW);
- unsigned long orig = clkslow;
-
- if (enable)
- clkslow &= ~S3C2410_CLKSLOW_UCLK_OFF;
- else
- clkslow |= S3C2410_CLKSLOW_UCLK_OFF;
-
- __raw_writel(clkslow, S3C2410_CLKSLOW);
-
- /* if we started the UPLL, then allow to settle */
-
- if (enable && (orig & S3C2410_CLKSLOW_UCLK_OFF))
- udelay(200);
-
- return 0;
-}
-
-/* standard clock definitions */
-
-static struct clk init_clocks_disable[] = {
- {
- .name = "nand",
- .id = -1,
- .parent = &clk_h,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2410_CLKCON_NAND,
- }, {
- .name = "sdi",
- .id = -1,
- .parent = &clk_p,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2410_CLKCON_SDI,
- }, {
- .name = "adc",
- .id = -1,
- .parent = &clk_p,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2410_CLKCON_ADC,
- }, {
- .name = "i2c",
- .id = -1,
- .parent = &clk_p,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2410_CLKCON_IIC,
- }, {
- .name = "iis",
- .id = -1,
- .parent = &clk_p,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2410_CLKCON_IIS,
- }, {
- .name = "spi",
- .id = -1,
- .parent = &clk_p,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2410_CLKCON_SPI,
- }
-};
-
-static struct clk init_clocks[] = {
- {
- .name = "lcd",
- .id = -1,
- .parent = &clk_h,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2410_CLKCON_LCDC,
- }, {
- .name = "gpio",
- .id = -1,
- .parent = &clk_p,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2410_CLKCON_GPIO,
- }, {
- .name = "usb-host",
- .id = -1,
- .parent = &clk_h,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2410_CLKCON_USBH,
- }, {
- .name = "usb-device",
- .id = -1,
- .parent = &clk_h,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2410_CLKCON_USBD,
- }, {
- .name = "timers",
- .id = -1,
- .parent = &clk_p,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2410_CLKCON_PWMT,
- }, {
- .name = "uart",
- .id = 0,
- .parent = &clk_p,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2410_CLKCON_UART0,
- }, {
- .name = "uart",
- .id = 1,
- .parent = &clk_p,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2410_CLKCON_UART1,
- }, {
- .name = "uart",
- .id = 2,
- .parent = &clk_p,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2410_CLKCON_UART2,
- }, {
- .name = "rtc",
- .id = -1,
- .parent = &clk_p,
- .enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2410_CLKCON_RTC,
- }, {
- .name = "watchdog",
- .id = -1,
- .parent = &clk_p,
- .ctrlbit = 0,
- }, {
- .name = "usb-bus-host",
- .id = -1,
- .parent = &clk_usb_bus,
- }, {
- .name = "usb-bus-gadget",
- .id = -1,
- .parent = &clk_usb_bus,
- },
-};
-
-/* s3c2410_baseclk_add()
- *
- * Add all the clocks used by the s3c2410 or compatible CPUs
- * such as the S3C2440 and S3C2442.
- *
- * We cannot use a system device as we are needed before any
- * of the init-calls that initialise the devices are actually
- * done.
-*/
-
-int __init s3c2410_baseclk_add(void)
-{
- unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW);
- unsigned long clkcon = __raw_readl(S3C2410_CLKCON);
- struct clk *clkp;
- struct clk *xtal;
- int ret;
- int ptr;
-
- clk_upll.enable = s3c2410_upll_enable;
-
- if (s3c24xx_register_clock(&clk_usb_bus) < 0)
- printk(KERN_ERR "failed to register usb bus clock\n");
-
- /* register clocks from clock array */
-
- clkp = init_clocks;
- for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) {
- /* ensure that we note the clock state */
-
- clkp->usage = clkcon & clkp->ctrlbit ? 1 : 0;
-
- ret = s3c24xx_register_clock(clkp);
- if (ret < 0) {
- printk(KERN_ERR "Failed to register clock %s (%d)\n",
- clkp->name, ret);
- }
- }
-
- /* We must be careful disabling the clocks we are not intending to
- * be using at boot time, as subsytems such as the LCD which do
- * their own DMA requests to the bus can cause the system to lockup
- * if they where in the middle of requesting bus access.
- *
- * Disabling the LCD clock if the LCD is active is very dangerous,
- * and therefore the bootloader should be careful to not enable
- * the LCD clock if it is not needed.
- */
-
- /* install (and disable) the clocks we do not need immediately */
-
- clkp = init_clocks_disable;
- for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
-
- ret = s3c24xx_register_clock(clkp);
- if (ret < 0) {
- printk(KERN_ERR "Failed to register clock %s (%d)\n",
- clkp->name, ret);
- }
-
- s3c2410_clkcon_enable(clkp, 0);
- }
-
- /* show the clock-slow value */
-
- xtal = clk_get(NULL, "xtal");
-
- printk("CLOCK: Slow mode (%ld.%ld MHz), %s, MPLL %s, UPLL %s\n",
- print_mhz(clk_get_rate(xtal) /
- ( 2 * S3C2410_CLKSLOW_GET_SLOWVAL(clkslow))),
- (clkslow & S3C2410_CLKSLOW_SLOW) ? "slow" : "fast",
- (clkslow & S3C2410_CLKSLOW_MPLL_OFF) ? "off" : "on",
- (clkslow & S3C2410_CLKSLOW_UCLK_OFF) ? "off" : "on");
-
- return 0;
-}
diff --git a/arch/arm/mach-s3c2410/s3c2410-dma.c b/arch/arm/mach-s3c2410/s3c2410-dma.c
deleted file mode 100644
index e67ba39..0000000
--- a/arch/arm/mach-s3c2410/s3c2410-dma.c
+++ /dev/null
@@ -1,161 +0,0 @@
-/* linux/arch/arm/mach-s3c2410/s3c2410-dma.c
- *
- * Copyright (c) 2006 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 DMA selection
- *
- * http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/sysdev.h>
-#include <linux/serial_core.h>
-
-#include <asm/dma.h>
-#include <asm/arch/dma.h>
-#include "dma.h"
-
-#include "cpu.h"
-
-#include <asm/arch/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-ac97.h>
-#include <asm/arch/regs-mem.h>
-#include <asm/arch/regs-lcd.h>
-#include <asm/arch/regs-sdi.h>
-#include <asm/arch/regs-iis.h>
-#include <asm/arch/regs-spi.h>
-
-static struct s3c24xx_dma_map __initdata s3c2410_dma_mappings[] = {
- [DMACH_XD0] = {
- .name = "xdreq0",
- .channels[0] = S3C2410_DCON_CH0_XDREQ0 | DMA_CH_VALID,
- },
- [DMACH_XD1] = {
- .name = "xdreq1",
- .channels[1] = S3C2410_DCON_CH1_XDREQ1 | DMA_CH_VALID,
- },
- [DMACH_SDI] = {
- .name = "sdi",
- .channels[0] = S3C2410_DCON_CH0_SDI | DMA_CH_VALID,
- .channels[2] = S3C2410_DCON_CH2_SDI | DMA_CH_VALID,
- .channels[3] = S3C2410_DCON_CH3_SDI | DMA_CH_VALID,
- .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO,
- .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO,
- },
- [DMACH_SPI0] = {
- .name = "spi0",
- .channels[1] = S3C2410_DCON_CH1_SPI | DMA_CH_VALID,
- .hw_addr.to = S3C2410_PA_SPI + S3C2410_SPTDAT,
- .hw_addr.from = S3C2410_PA_SPI + S3C2410_SPRDAT,
- },
- [DMACH_SPI1] = {
- .name = "spi1",
- .channels[3] = S3C2410_DCON_CH3_SPI | DMA_CH_VALID,
- .hw_addr.to = S3C2410_PA_SPI + 0x20 + S3C2410_SPTDAT,
- .hw_addr.from = S3C2410_PA_SPI + 0x20 + S3C2410_SPRDAT,
- },
- [DMACH_UART0] = {
- .name = "uart0",
- .channels[0] = S3C2410_DCON_CH0_UART0 | DMA_CH_VALID,
- .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH,
- .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH,
- },
- [DMACH_UART1] = {
- .name = "uart1",
- .channels[1] = S3C2410_DCON_CH1_UART1 | DMA_CH_VALID,
- .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH,
- .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH,
- },
- [DMACH_UART2] = {
- .name = "uart2",
- .channels[3] = S3C2410_DCON_CH3_UART2 | DMA_CH_VALID,
- .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH,
- .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH,
- },
- [DMACH_TIMER] = {
- .name = "timer",
- .channels[0] = S3C2410_DCON_CH0_TIMER | DMA_CH_VALID,
- .channels[2] = S3C2410_DCON_CH2_TIMER | DMA_CH_VALID,
- .channels[3] = S3C2410_DCON_CH3_TIMER | DMA_CH_VALID,
- },
- [DMACH_I2S_IN] = {
- .name = "i2s-sdi",
- .channels[1] = S3C2410_DCON_CH1_I2SSDI | DMA_CH_VALID,
- .channels[2] = S3C2410_DCON_CH2_I2SSDI | DMA_CH_VALID,
- .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO,
- },
- [DMACH_I2S_OUT] = {
- .name = "i2s-sdo",
- .channels[2] = S3C2410_DCON_CH2_I2SSDO | DMA_CH_VALID,
- .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO,
- },
- [DMACH_USB_EP1] = {
- .name = "usb-ep1",
- .channels[0] = S3C2410_DCON_CH0_USBEP1 | DMA_CH_VALID,
- },
- [DMACH_USB_EP2] = {
- .name = "usb-ep2",
- .channels[1] = S3C2410_DCON_CH1_USBEP2 | DMA_CH_VALID,
- },
- [DMACH_USB_EP3] = {
- .name = "usb-ep3",
- .channels[2] = S3C2410_DCON_CH2_USBEP3 | DMA_CH_VALID,
- },
- [DMACH_USB_EP4] = {
- .name = "usb-ep4",
- .channels[3] =S3C2410_DCON_CH3_USBEP4 | DMA_CH_VALID,
- },
-};
-
-static void s3c2410_dma_select(struct s3c2410_dma_chan *chan,
- struct s3c24xx_dma_map *map)
-{
- chan->dcon = map->channels[chan->number] & ~DMA_CH_VALID;
-}
-
-static struct s3c24xx_dma_selection __initdata s3c2410_dma_sel = {
- .select = s3c2410_dma_select,
- .dcon_mask = 7 << 24,
- .map = s3c2410_dma_mappings,
- .map_size = ARRAY_SIZE(s3c2410_dma_mappings),
-};
-
-static int s3c2410_dma_add(struct sys_device *sysdev)
-{
- return s3c24xx_dma_init_map(&s3c2410_dma_sel);
-}
-
-#if defined(CONFIG_CPU_S3C2410)
-static struct sysdev_driver s3c2410_dma_driver = {
- .add = s3c2410_dma_add,
-};
-
-static int __init s3c2410_dma_init(void)
-{
- return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_dma_driver);
-}
-
-arch_initcall(s3c2410_dma_init);
-#endif
-
-#if defined(CONFIG_CPU_S3C2442)
-/* S3C2442 DMA contains the same selection table as the S3C2410 */
-static struct sysdev_driver s3c2442_dma_driver = {
- .add = s3c2410_dma_add,
-};
-
-static int __init s3c2442_dma_init(void)
-{
- return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_dma_driver);
-}
-
-arch_initcall(s3c2442_dma_init);
-#endif
-
diff --git a/arch/arm/mach-s3c2410/s3c2410-gpio.c b/arch/arm/mach-s3c2410/s3c2410-gpio.c
deleted file mode 100644
index ec3a276..0000000
--- a/arch/arm/mach-s3c2410/s3c2410-gpio.c
+++ /dev/null
@@ -1,71 +0,0 @@
-/* linux/arch/arm/mach-s3c2410/s3c2410-gpio.c
- *
- * Copyright (c) 2004-2006 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 GPIO support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-
-#include <asm/hardware.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-
-#include <asm/arch/regs-gpio.h>
-
-int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
- unsigned int config)
-{
- void __iomem *reg = S3C24XX_EINFLT0;
- unsigned long flags;
- unsigned long val;
-
- if (pin < S3C2410_GPG8 || pin > S3C2410_GPG15)
- return -1;
-
- config &= 0xff;
-
- pin -= S3C2410_GPG8;
- reg += pin & ~3;
-
- local_irq_save(flags);
-
- /* update filter width and clock source */
-
- val = __raw_readl(reg);
- val &= ~(0xff << ((pin & 3) * 8));
- val |= config << ((pin & 3) * 8);
- __raw_writel(val, reg);
-
- /* update filter enable */
-
- val = __raw_readl(S3C24XX_EXTINT2);
- val &= ~(1 << ((pin * 4) + 3));
- val |= on << ((pin * 4) + 3);
- __raw_writel(val, S3C24XX_EXTINT2);
-
- local_irq_restore(flags);
-
- return 0;
-}
-
-EXPORT_SYMBOL(s3c2410_gpio_irqfilter);
diff --git a/arch/arm/mach-s3c2410/s3c2410-irq.c b/arch/arm/mach-s3c2410/s3c2410-irq.c
deleted file mode 100644
index c796c9c..0000000
--- a/arch/arm/mach-s3c2410/s3c2410-irq.c
+++ /dev/null
@@ -1,48 +0,0 @@
-/* linux/arch/arm/mach-s3c2410/s3c2410-irq.c
- *
- * Copyright (c) 2006 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/ptrace.h>
-#include <linux/sysdev.h>
-
-#include "cpu.h"
-#include "pm.h"
-
-static int s3c2410_irq_add(struct sys_device *sysdev)
-{
- return 0;
-}
-
-static struct sysdev_driver s3c2410_irq_driver = {
- .add = s3c2410_irq_add,
- .suspend = s3c24xx_irq_suspend,
- .resume = s3c24xx_irq_resume,
-};
-
-static int s3c2410_irq_init(void)
-{
- return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_irq_driver);
-}
-
-arch_initcall(s3c2410_irq_init);
diff --git a/arch/arm/mach-s3c2410/s3c2410-pm.c b/arch/arm/mach-s3c2410/s3c2410-pm.c
deleted file mode 100644
index 8bb6e5e..0000000
--- a/arch/arm/mach-s3c2410/s3c2410-pm.c
+++ /dev/null
@@ -1,156 +0,0 @@
-/* linux/arch/arm/mach-s3c2410/s3c2410-pm.c
- *
- * Copyright (c) 2006 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 (and compatible) Power Manager (Suspend-To-RAM) support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-*/
-
-#include <linux/init.h>
-#include <linux/suspend.h>
-#include <linux/errno.h>
-#include <linux/time.h>
-#include <linux/sysdev.h>
-
-#include <asm/hardware.h>
-#include <asm/io.h>
-
-#include <asm/mach-types.h>
-
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/h1940.h>
-
-#include "cpu.h"
-#include "pm.h"
-
-#ifdef CONFIG_S3C2410_PM_DEBUG
-extern void pm_dbg(const char *fmt, ...);
-#define DBG(fmt...) pm_dbg(fmt)
-#else
-#define DBG(fmt...) printk(KERN_DEBUG fmt)
-#endif
-
-static void s3c2410_pm_prepare(void)
-{
- /* ensure at least GSTATUS3 has the resume address */
-
- __raw_writel(virt_to_phys(s3c2410_cpu_resume), S3C2410_GSTATUS3);
-
- DBG("GSTATUS3 0x%08x\n", __raw_readl(S3C2410_GSTATUS3));
- DBG("GSTATUS4 0x%08x\n", __raw_readl(S3C2410_GSTATUS4));
-
- if (machine_is_h1940()) {
- void *base = phys_to_virt(H1940_SUSPEND_CHECK);
- unsigned long ptr;
- unsigned long calc = 0;
-
- /* generate check for the bootloader to check on resume */
-
- for (ptr = 0; ptr < 0x40000; ptr += 0x400)
- calc += __raw_readl(base+ptr);
-
- __raw_writel(calc, phys_to_virt(H1940_SUSPEND_CHECKSUM));
- }
-
- /* the RX3715 uses similar code and the same H1940 and the
- * same offsets for resume and checksum pointers */
-
- if (machine_is_rx3715()) {
- void *base = phys_to_virt(H1940_SUSPEND_CHECK);
- unsigned long ptr;
- unsigned long calc = 0;
-
- /* generate check for the bootloader to check on resume */
-
- for (ptr = 0; ptr < 0x40000; ptr += 0x4)
- calc += __raw_readl(base+ptr);
-
- __raw_writel(calc, phys_to_virt(H1940_SUSPEND_CHECKSUM));
- }
-
- if ( machine_is_aml_m5900() )
- s3c2410_gpio_setpin(S3C2410_GPF2, 1);
-
-}
-
-static int s3c2410_pm_resume(struct sys_device *dev)
-{
- unsigned long tmp;
-
- /* unset the return-from-sleep flag, to ensure reset */
-
- tmp = __raw_readl(S3C2410_GSTATUS2);
- tmp &= S3C2410_GSTATUS2_OFFRESET;
- __raw_writel(tmp, S3C2410_GSTATUS2);
-
- if ( machine_is_aml_m5900() )
- s3c2410_gpio_setpin(S3C2410_GPF2, 0);
-
- return 0;
-}
-
-static int s3c2410_pm_add(struct sys_device *dev)
-{
- pm_cpu_prep = s3c2410_pm_prepare;
- pm_cpu_sleep = s3c2410_cpu_suspend;
-
- return 0;
-}
-
-#if defined(CONFIG_CPU_S3C2410)
-static struct sysdev_driver s3c2410_pm_driver = {
- .add = s3c2410_pm_add,
- .resume = s3c2410_pm_resume,
-};
-
-/* register ourselves */
-
-static int __init s3c2410_pm_drvinit(void)
-{
- return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_pm_driver);
-}
-
-arch_initcall(s3c2410_pm_drvinit);
-#endif
-
-#if defined(CONFIG_CPU_S3C2440)
-static struct sysdev_driver s3c2440_pm_driver = {
- .add = s3c2410_pm_add,
- .resume = s3c2410_pm_resume,
-};
-
-static int __init s3c2440_pm_drvinit(void)
-{
- return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_pm_driver);
-}
-
-arch_initcall(s3c2440_pm_drvinit);
-#endif
-
-#if defined(CONFIG_CPU_S3C2442)
-static struct sysdev_driver s3c2442_pm_driver = {
- .add = s3c2410_pm_add,
- .resume = s3c2410_pm_resume,
-};
-
-static int __init s3c2442_pm_drvinit(void)
-{
- return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_pm_driver);
-}
-
-arch_initcall(s3c2442_pm_drvinit);
-#endif
diff --git a/arch/arm/mach-s3c2410/s3c2410-sleep.S b/arch/arm/mach-s3c2410/s3c2410-sleep.S
deleted file mode 100644
index 9179a10..0000000
--- a/arch/arm/mach-s3c2410/s3c2410-sleep.S
+++ /dev/null
@@ -1,68 +0,0 @@
-/* linux/arch/arm/mach-s3c2410/s3c2410-sleep.S
- *
- * Copyright (c) 2004 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 Power Manager (Suspend-To-RAM) support
- *
- * Based on PXA/SA1100 sleep code by:
- * Nicolas Pitre, (c) 2002 Monta Vista Software Inc
- * Cliff Brake, (c) 2001
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-*/
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include <asm/hardware.h>
-#include <asm/arch/map.h>
-
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-clock.h>
-#include <asm/arch/regs-mem.h>
-#include <asm/arch/regs-serial.h>
-
- /* s3c2410_cpu_suspend
- *
- * put the cpu into sleep mode
- */
-
-ENTRY(s3c2410_cpu_suspend)
- @@ prepare cpu to sleep
-
- ldr r4, =S3C2410_REFRESH
- ldr r5, =S3C24XX_MISCCR
- ldr r6, =S3C2410_CLKCON
- ldr r7, [ r4 ] @ get REFRESH (and ensure in TLB)
- ldr r8, [ r5 ] @ get MISCCR (and ensure in TLB)
- ldr r9, [ r6 ] @ get CLKCON (and ensure in TLB)
-
- orr r7, r7, #S3C2410_REFRESH_SELF @ SDRAM sleep command
- orr r8, r8, #S3C2410_MISCCR_SDSLEEP @ SDRAM power-down signals
- orr r9, r9, #S3C2410_CLKCON_POWER @ power down command
-
- teq pc, #0 @ first as a trial-run to load cache
- bl s3c2410_do_sleep
- teq r0, r0 @ now do it for real
- b s3c2410_do_sleep @
-
- @@ align next bit of code to cache line
- .align 8
-s3c2410_do_sleep:
- streq r7, [ r4 ] @ SDRAM sleep command
- streq r8, [ r5 ] @ SDRAM power-down config
- streq r9, [ r6 ] @ CPU sleep
-1: beq 1b
- mov pc, r14
diff --git a/arch/arm/mach-s3c2410/s3c2410.c b/arch/arm/mach-s3c2410/s3c2410.c
index 4cdc0d7..1a86a98 100644
--- a/arch/arm/mach-s3c2410/s3c2410.c
+++ b/arch/arm/mach-s3c2410/s3c2410.c
@@ -31,10 +31,10 @@
#include <asm/arch/regs-clock.h>
#include <asm/arch/regs-serial.h>
-#include "s3c2410.h"
-#include "cpu.h"
-#include "devs.h"
-#include "clock.h"
+#include <asm/plat-s3c24xx/s3c2410.h>
+#include <asm/plat-s3c24xx/cpu.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/clock.h>
/* Initial IO mappings */
@@ -110,7 +110,7 @@
/* need to register class before we actually register the device, and
* we also need to ensure that it has been initialised before any of the
- * drivers even try to use it (even if not on an s3c2440 based system)
+ * drivers even try to use it (even if not on an s3c2410 based system)
* as a driver which may support both 2410 and 2440 may try and use it.
*/
diff --git a/arch/arm/mach-s3c2410/sleep.S b/arch/arm/mach-s3c2410/sleep.S
index 2018c2e..637aaba 100644
--- a/arch/arm/mach-s3c2410/sleep.S
+++ b/arch/arm/mach-s3c2410/sleep.S
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c2410/sleep.S
+/* linux/arch/arm/mach-s3c2410/s3c2410-sleep.S
*
* Copyright (c) 2004 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
@@ -34,126 +34,35 @@
#include <asm/arch/regs-mem.h>
#include <asm/arch/regs-serial.h>
-/* CONFIG_DEBUG_RESUME is dangerous if your bootloader does not
- * reset the UART configuration, only enable if you really need this!
-*/
-//#define CONFIG_DEBUG_RESUME
-
- .text
-
- /* s3c2410_cpu_save
+ /* s3c2410_cpu_suspend
*
- * save enough of the CPU state to allow us to re-start
- * pm.c code. as we store items like the sp/lr, we will
- * end up returning from this function when the cpu resumes
- * so the return value is set to mark this.
- *
- * This arangement means we avoid having to flush the cache
- * from this code.
- *
- * entry:
- * r0 = pointer to save block
- *
- * exit:
- * r0 = 0 => we stored everything
- * 1 => resumed from sleep
+ * put the cpu into sleep mode
*/
-ENTRY(s3c2410_cpu_save)
- stmfd sp!, { r4 - r12, lr }
+ENTRY(s3c2410_cpu_suspend)
+ @@ prepare cpu to sleep
- @@ store co-processor registers
+ ldr r4, =S3C2410_REFRESH
+ ldr r5, =S3C24XX_MISCCR
+ ldr r6, =S3C2410_CLKCON
+ ldr r7, [ r4 ] @ get REFRESH (and ensure in TLB)
+ ldr r8, [ r5 ] @ get MISCCR (and ensure in TLB)
+ ldr r9, [ r6 ] @ get CLKCON (and ensure in TLB)
- mrc p15, 0, r4, c15, c1, 0 @ CP access register
- mrc p15, 0, r5, c13, c0, 0 @ PID
- mrc p15, 0, r6, c3, c0, 0 @ Domain ID
- mrc p15, 0, r7, c2, c0, 0 @ translation table base address
- mrc p15, 0, r8, c1, c0, 0 @ control register
+ orr r7, r7, #S3C2410_REFRESH_SELF @ SDRAM sleep command
+ orr r8, r8, #S3C2410_MISCCR_SDSLEEP @ SDRAM power-down signals
+ orr r9, r9, #S3C2410_CLKCON_POWER @ power down command
- stmia r0, { r4 - r13 }
+ teq pc, #0 @ first as a trial-run to load cache
+ bl s3c2410_do_sleep
+ teq r0, r0 @ now do it for real
+ b s3c2410_do_sleep @
- mov r0, #0
- ldmfd sp, { r4 - r12, pc }
-
- @@ return to the caller, after having the MMU
- @@ turned on, this restores the last bits from the
- @@ stack
-resume_with_mmu:
- mov r0, #1
- ldmfd sp!, { r4 - r12, pc }
-
- .ltorg
-
- @@ the next bits sit in the .data segment, even though they
- @@ happen to be code... the s3c2410_sleep_save_phys needs to be
- @@ accessed by the resume code before it can restore the MMU.
- @@ This means that the variable has to be close enough for the
- @@ code to read it... since the .text segment needs to be RO,
- @@ the data segment can be the only place to put this code.
-
- .data
-
- .global s3c2410_sleep_save_phys
-s3c2410_sleep_save_phys:
- .word 0
-
- /* s3c2410_cpu_resume
- *
- * resume code entry for bootloader to call
- *
- * we must put this code here in the data segment as we have no
- * other way of restoring the stack pointer after sleep, and we
- * must not write to the code segment (code is read-only)
- */
-
-ENTRY(s3c2410_cpu_resume)
- mov r0, #PSR_I_BIT | PSR_F_BIT | SVC_MODE
- msr cpsr_c, r0
-
- @@ load UART to allow us to print the two characters for
- @@ resume debug
-
- mov r2, #S3C24XX_PA_UART & 0xff000000
- orr r2, r2, #S3C24XX_PA_UART & 0xff000
-
-#if 0
- /* SMDK2440 LED set */
- mov r14, #S3C24XX_PA_GPIO
- ldr r12, [ r14, #0x54 ]
- bic r12, r12, #3<<4
- orr r12, r12, #1<<7
- str r12, [ r14, #0x54 ]
-#endif
-
-#ifdef CONFIG_DEBUG_RESUME
- mov r3, #'L'
- strb r3, [ r2, #S3C2410_UTXH ]
-1001:
- ldrb r14, [ r3, #S3C2410_UTRSTAT ]
- tst r14, #S3C2410_UTRSTAT_TXE
- beq 1001b
-#endif /* CONFIG_DEBUG_RESUME */
-
- mov r1, #0
- mcr p15, 0, r1, c8, c7, 0 @@ invalidate I & D TLBs
- mcr p15, 0, r1, c7, c7, 0 @@ invalidate I & D caches
-
- ldr r0, s3c2410_sleep_save_phys @ address of restore block
- ldmia r0, { r4 - r13 }
-
- mcr p15, 0, r4, c15, c1, 0 @ CP access register
- mcr p15, 0, r5, c13, c0, 0 @ PID
- mcr p15, 0, r6, c3, c0, 0 @ Domain ID
- mcr p15, 0, r7, c2, c0, 0 @ translation table base
-
-#ifdef CONFIG_DEBUG_RESUME
- mov r3, #'R'
- strb r3, [ r2, #S3C2410_UTXH ]
-#endif
-
- ldr r2, =resume_with_mmu
- mcr p15, 0, r8, c1, c0, 0 @ turn on MMU, etc
- nop @ second-to-last before mmu
- mov pc, r2 @ go back to virtual address
-
- .ltorg
+ @@ align next bit of code to cache line
+ .align 5
+s3c2410_do_sleep:
+ streq r7, [ r4 ] @ SDRAM sleep command
+ streq r8, [ r5 ] @ SDRAM power-down config
+ streq r9, [ r6 ] @ CPU sleep
+1: beq 1b
+ mov pc, r14
diff --git a/arch/arm/mach-s3c2410/usb-simtec.c b/arch/arm/mach-s3c2410/usb-simtec.c
index 22b0e1c..bcd562a 100644
--- a/arch/arm/mach-s3c2410/usb-simtec.c
+++ b/arch/arm/mach-s3c2410/usb-simtec.c
@@ -35,7 +35,7 @@
#include <asm/io.h>
#include <asm/irq.h>
-#include "devs.h"
+#include <asm/plat-s3c24xx/devs.h>
#include "usb-simtec.h"
/* control power and monitor over-current events on various Simtec
diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig
new file mode 100644
index 0000000..befc5fd
--- /dev/null
+++ b/arch/arm/mach-s3c2412/Kconfig
@@ -0,0 +1,58 @@
+# arch/arm/mach-s3c2412/Kconfig
+#
+# Copyright 2007 Simtec Electronics
+#
+# Licensed under GPLv2
+
+config CPU_S3C2412
+ bool
+ depends on ARCH_S3C2410
+ select S3C2412_PM if PM
+ select S3C2412_DMA if S3C2410_DMA
+ help
+ Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line
+
+config CPU_S3C2412_ONLY
+ bool
+ depends on ARCH_S3C2410 && !CPU_S3C2400 && !CPU_S3C2410 && \
+ !CPU_S3C2440 && !CPU_S3C2442 && !CPU_S3C2443 && CPU_S3C2412
+ default y if CPU_S3C2412
+
+config S3C2412_DMA
+ bool
+ depends on CPU_S3C2412
+ help
+ Internal config node for S3C2412 DMA support
+
+config S3C2412_PM
+ bool
+ help
+ Internal config node to apply S3C2412 power management
+
+
+menu "S3C2412 Machines"
+
+config MACH_SMDK2413
+ bool "SMDK2413"
+ select CPU_S3C2412
+ select MACH_S3C2413
+ select MACH_SMDK
+ help
+ Say Y here if you are using an SMDK2413
+
+config MACH_S3C2413
+ bool
+ help
+ Internal node for S3C2413 version of SMDK2413, so that
+ machine_is_s3c2413() will work when MACH_SMDK2413 is
+ selected
+
+config MACH_VSTMS
+ bool "VMSTMS"
+ select CPU_S3C2412
+ help
+ Say Y here if you are using an VSTMS board
+
+
+endmenu
+
diff --git a/arch/arm/mach-s3c2412/Makefile b/arch/arm/mach-s3c2412/Makefile
new file mode 100644
index 0000000..f8e0116
--- /dev/null
+++ b/arch/arm/mach-s3c2412/Makefile
@@ -0,0 +1,21 @@
+# arch/arm/mach-s3c2412/Makefile
+#
+# Copyright 2007 Simtec Electronics
+#
+# Licensed under GPLv2
+
+obj-y :=
+obj-m :=
+obj-n :=
+obj- :=
+
+obj-$(CONFIG_CPU_S3C2412) += s3c2412.o
+obj-$(CONFIG_CPU_S3C2412) += irq.o
+obj-$(CONFIG_CPU_S3C2412) += clock.o
+obj-$(CONFIG_S3C2412_DMA) += dma.o
+obj-$(CONFIG_S3C2412_PM) += pm.o
+
+# Machine support
+
+obj-$(CONFIG_MACH_SMDK2413) += mach-smdk2413.o
+obj-$(CONFIG_MACH_VSTMS) += mach-vstms.o
diff --git a/arch/arm/mach-s3c2410/s3c2412-clock.c b/arch/arm/mach-s3c2412/clock.c
similarity index 98%
rename from arch/arm/mach-s3c2410/s3c2412-clock.c
rename to arch/arm/mach-s3c2412/clock.c
index 8f94ad8..6a8e444 100644
--- a/arch/arm/mach-s3c2410/s3c2412-clock.c
+++ b/arch/arm/mach-s3c2412/clock.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c2410/s3c2412-clock.c
+/* linux/arch/arm/mach-s3c2412/clock.c
*
* Copyright (c) 2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
@@ -41,9 +41,9 @@
#include <asm/arch/regs-clock.h>
#include <asm/arch/regs-gpio.h>
-#include "s3c2412.h"
-#include "clock.h"
-#include "cpu.h"
+#include <asm/plat-s3c24xx/s3c2412.h>
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/cpu.h>
/* We currently have to assume that the system is running
* from the XTPll input, and that all ***REFCLKs are being
diff --git a/arch/arm/mach-s3c2410/s3c2412-dma.c b/arch/arm/mach-s3c2412/dma.c
similarity index 96%
rename from arch/arm/mach-s3c2410/s3c2412-dma.c
rename to arch/arm/mach-s3c2412/dma.c
index 138f726..d0f4695 100644
--- a/arch/arm/mach-s3c2410/s3c2412-dma.c
+++ b/arch/arm/mach-s3c2412/dma.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c2410/s3c2412-dma.c
+/* linux/arch/arm/mach-s3c2412/dma.c
*
* Copyright (c) 2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
@@ -21,8 +21,8 @@
#include <asm/arch/dma.h>
#include <asm/io.h>
-#include "dma.h"
-#include "cpu.h"
+#include <asm/plat-s3c24xx/dma.h>
+#include <asm/plat-s3c24xx/cpu.h>
#include <asm/arch/regs-serial.h>
#include <asm/arch/regs-gpio.h>
@@ -146,6 +146,7 @@
static int s3c2412_dma_add(struct sys_device *sysdev)
{
+ s3c2410_dma_init();
return s3c24xx_dma_init_map(&s3c2412_dma_sel);
}
diff --git a/arch/arm/mach-s3c2410/s3c2412-irq.c b/arch/arm/mach-s3c2412/irq.c
similarity index 95%
rename from arch/arm/mach-s3c2410/s3c2412-irq.c
rename to arch/arm/mach-s3c2412/irq.c
index ffcc30b..e89dbdc 100644
--- a/arch/arm/mach-s3c2410/s3c2412-irq.c
+++ b/arch/arm/mach-s3c2412/irq.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c2412/s3c2412-irq.c
+/* linux/arch/arm/mach-s3c2412/irq.c
*
* Copyright (c) 2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
@@ -35,9 +35,9 @@
#include <asm/arch/regs-irq.h>
#include <asm/arch/regs-gpio.h>
-#include "cpu.h"
-#include "irq.h"
-#include "pm.h"
+#include <asm/plat-s3c24xx/cpu.h>
+#include <asm/plat-s3c24xx/irq.h>
+#include <asm/plat-s3c24xx/pm.h>
/* the s3c2412 changes the behaviour of IRQ_EINT0 through IRQ_EINT3 by
* having them turn up in both the INT* and the EINT* registers. Whilst
diff --git a/arch/arm/mach-s3c2410/mach-smdk2413.c b/arch/arm/mach-s3c2412/mach-smdk2413.c
similarity index 67%
rename from arch/arm/mach-s3c2410/mach-smdk2413.c
rename to arch/arm/mach-s3c2412/mach-smdk2413.c
index 4f89abd..b5befce 100644
--- a/arch/arm/mach-s3c2410/mach-smdk2413.c
+++ b/arch/arm/mach-s3c2412/mach-smdk2413.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c2410/mach-smdk2413.c
+/* linux/arch/arm/mach-s3c2412/mach-smdk2413.c
*
* Copyright (c) 2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
@@ -37,15 +37,16 @@
#include <asm/arch/regs-lcd.h>
#include <asm/arch/idle.h>
+#include <asm/arch/udc.h>
#include <asm/arch/fb.h>
-#include "s3c2410.h"
-#include "s3c2412.h"
-#include "clock.h"
-#include "devs.h"
-#include "cpu.h"
+#include <asm/plat-s3c24xx/s3c2410.h>
+#include <asm/plat-s3c24xx/s3c2412.h>
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
-#include "common-smdk.h"
+#include <asm/plat-s3c24xx/common-smdk.h>
static struct map_desc smdk2413_iodesc[] __initdata = {
};
@@ -75,12 +76,38 @@
}
};
+static void smdk2413_udc_pullup(enum s3c2410_udc_cmd_e cmd)
+{
+ printk(KERN_DEBUG "udc: pullup(%d)\n",cmd);
+
+ switch (cmd)
+ {
+ case S3C2410_UDC_P_ENABLE :
+ s3c2410_gpio_setpin(S3C2410_GPF2, 1);
+ break;
+ case S3C2410_UDC_P_DISABLE :
+ s3c2410_gpio_setpin(S3C2410_GPF2, 0);
+ break;
+ case S3C2410_UDC_P_RESET :
+ break;
+ default:
+ break;
+ }
+}
+
+
+static struct s3c2410_udc_mach_info smdk2413_udc_cfg __initdata = {
+ .udc_command = smdk2413_udc_pullup,
+};
+
+
static struct platform_device *smdk2413_devices[] __initdata = {
&s3c_device_usb,
//&s3c_device_lcd,
&s3c_device_wdt,
&s3c_device_i2c,
&s3c_device_iis,
+ &s3c_device_usbgadget,
};
static struct s3c24xx_board smdk2413_board __initdata = {
@@ -109,7 +136,19 @@
}
static void __init smdk2413_machine_init(void)
-{
+{ /* Turn off suspend on both USB ports, and switch the
+ * selectable USB port to USB device mode. */
+
+ s3c2410_gpio_setpin(S3C2410_GPF2, 0);
+ s3c2410_gpio_cfgpin(S3C2410_GPF2, S3C2410_GPIO_OUTPUT);
+
+ s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
+ S3C2410_MISCCR_USBSUSPND0 |
+ S3C2410_MISCCR_USBSUSPND1, 0x0);
+
+
+ s3c24xx_udc_set_platdata(&smdk2413_udc_cfg);
+
smdk_machine_init();
}
@@ -126,6 +165,19 @@
.timer = &s3c24xx_timer,
MACHINE_END
+MACHINE_START(SMDK2412, "SMDK2412")
+ /* Maintainer: Ben Dooks <ben@fluff.org> */
+ .phys_io = S3C2410_PA_UART,
+ .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
+ .boot_params = S3C2410_SDRAM_PA + 0x100,
+
+ .fixup = smdk2413_fixup,
+ .init_irq = s3c24xx_init_irq,
+ .map_io = smdk2413_map_io,
+ .init_machine = smdk2413_machine_init,
+ .timer = &s3c24xx_timer,
+MACHINE_END
+
MACHINE_START(SMDK2413, "SMDK2413")
/* Maintainer: Ben Dooks <ben@fluff.org> */
.phys_io = S3C2410_PA_UART,
diff --git a/arch/arm/mach-s3c2410/mach-vstms.c b/arch/arm/mach-s3c2412/mach-vstms.c
similarity index 93%
rename from arch/arm/mach-s3c2410/mach-vstms.c
rename to arch/arm/mach-s3c2412/mach-vstms.c
index 0360e10..4231b54 100644
--- a/arch/arm/mach-s3c2410/mach-vstms.c
+++ b/arch/arm/mach-s3c2412/mach-vstms.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c2410/mach-vstms.c
+/* linux/arch/arm/mach-s3c2412/mach-vstms.c
*
* (C) 2006 Thomas Gleixner <tglx@linutronix.de>
*
@@ -28,7 +28,6 @@
#include <asm/mach/irq.h>
#include <asm/hardware.h>
-#include <asm/hardware/iomd.h>
#include <asm/setup.h>
#include <asm/io.h>
#include <asm/irq.h>
@@ -43,11 +42,11 @@
#include <asm/arch/nand.h>
-#include "s3c2410.h"
-#include "s3c2412.h"
-#include "clock.h"
-#include "devs.h"
-#include "cpu.h"
+#include <asm/plat-s3c24xx/s3c2410.h>
+#include <asm/plat-s3c24xx/s3c2412.h>
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
static struct map_desc vstms_iodesc[] __initdata = {
diff --git a/arch/arm/mach-s3c2410/s3c2412-pm.c b/arch/arm/mach-s3c2412/pm.c
similarity index 94%
rename from arch/arm/mach-s3c2410/s3c2412-pm.c
rename to arch/arm/mach-s3c2412/pm.c
index 19b6332..8988dac 100644
--- a/arch/arm/mach-s3c2410/s3c2412-pm.c
+++ b/arch/arm/mach-s3c2412/pm.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c2410/s3c2412-pm.c
+/* linux/arch/arm/mach-s3c2412/pm.c
*
* Copyright (c) 2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
@@ -28,10 +28,10 @@
#include <asm/arch/regs-gpio.h>
#include <asm/arch/regs-dsc.h>
-#include "cpu.h"
-#include "pm.h"
+#include <asm/plat-s3c24xx/cpu.h>
+#include <asm/plat-s3c24xx/pm.h>
-#include "s3c2412.h"
+#include <asm/plat-s3c24xx/s3c2412.h>
static void s3c2412_cpu_suspend(void)
{
diff --git a/arch/arm/mach-s3c2410/s3c2412.c b/arch/arm/mach-s3c2412/s3c2412.c
similarity index 94%
rename from arch/arm/mach-s3c2410/s3c2412.c
rename to arch/arm/mach-s3c2412/s3c2412.c
index 2f651a8..aafe0bc 100644
--- a/arch/arm/mach-s3c2410/s3c2412.c
+++ b/arch/arm/mach-s3c2412/s3c2412.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c2410/s3c2412.c
+/* linux/arch/arm/mach-s3c2412/s3c2412.c
*
* Copyright (c) 2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
@@ -38,11 +38,11 @@
#include <asm/arch/regs-gpioj.h>
#include <asm/arch/regs-dsc.h>
-#include "s3c2412.h"
-#include "cpu.h"
-#include "devs.h"
-#include "clock.h"
-#include "pm.h"
+#include <asm/plat-s3c24xx/s3c2412.h>
+#include <asm/plat-s3c24xx/cpu.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/pm.h>
#ifndef CONFIG_CPU_S3C2412_ONLY
void __iomem *s3c24xx_va_gpio2 = S3C24XX_VA_GPIO;
diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
new file mode 100644
index 0000000..e3bfda0
--- /dev/null
+++ b/arch/arm/mach-s3c2440/Kconfig
@@ -0,0 +1,71 @@
+# arch/arm/mach-s3c2440/Kconfig
+#
+# Copyright 2007 Simtec Electronics
+#
+# Licensed under GPLv2
+
+config CPU_S3C2440
+ bool
+ depends on ARCH_S3C2410
+ select S3C2410_CLOCK
+ select S3C2410_PM if PM
+ select S3C2410_GPIO
+ select S3C2440_DMA if S3C2410_DMA
+ select CPU_S3C244X
+ help
+ Support for S3C2440 Samsung Mobile CPU based systems.
+
+config S3C2440_DMA
+ bool
+ depends on ARCH_S3C2410 && CPU_S3C24405B
+ help
+ Support for S3C2440 specific DMA code5A
+
+
+menu "S3C2440 Machines"
+
+config MACH_ANUBIS
+ bool "Simtec Electronics ANUBIS"
+ select CPU_S3C2440
+ select PM_SIMTEC if PM
+ help
+ Say Y here if you are using the Simtec Electronics ANUBIS
+ development system
+
+config MACH_OSIRIS
+ bool "Simtec IM2440D20 (OSIRIS) module"
+ select CPU_S3C2440
+ select PM_SIMTEC if PM
+ help
+ Say Y here if you are using the Simtec IM2440D20 module, also
+ known as the Osiris.
+
+config MACH_RX3715
+ bool "HP iPAQ rx3715"
+ select CPU_S3C2440
+ select PM_H1940 if PM
+ help
+ Say Y here if you are using the HP iPAQ rx3715.
+
+config ARCH_S3C2440
+ bool "SMDK2440"
+ select CPU_S3C2440
+ select MACH_SMDK
+ help
+ Say Y here if you are using the SMDK2440.
+
+config MACH_NEXCODER_2440
+ bool "NexVision NEXCODER 2440 Light Board"
+ select CPU_S3C2440
+ help
+ Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board
+
+config SMDK2440_CPU2440
+ bool "SMDK2440 with S3C2440 CPU module"
+ depends on ARCH_S3C2440
+ default y if ARCH_S3C2440
+ select CPU_S3C2440
+
+
+endmenu
+
diff --git a/arch/arm/mach-s3c2440/Makefile b/arch/arm/mach-s3c2440/Makefile
new file mode 100644
index 0000000..c81ed62
--- /dev/null
+++ b/arch/arm/mach-s3c2440/Makefile
@@ -0,0 +1,23 @@
+# arch/arm/mach-s3c2440/Makefile
+#
+# Copyright 2007 Simtec Electronics
+#
+# Licensed under GPLv2
+
+obj-y :=
+obj-m :=
+obj-n :=
+obj- :=
+
+obj-$(CONFIG_CPU_S3C2440) += s3c2440.o dsc.o
+obj-$(CONFIG_CPU_S3C2440) += irq.o
+obj-$(CONFIG_CPU_S3C2440) += clock.o
+obj-$(CONFIG_S3C2440_DMA) += dma.o
+
+# Machine support
+
+obj-$(CONFIG_MACH_ANUBIS) += mach-anubis.o
+obj-$(CONFIG_MACH_OSIRIS) += mach-osiris.o
+obj-$(CONFIG_MACH_RX3715) += mach-rx3715.o
+obj-$(CONFIG_ARCH_S3C2440) += mach-smdk2440.o
+obj-$(CONFIG_MACH_NEXCODER_2440) += mach-nexcoder.o
diff --git a/arch/arm/mach-s3c2410/s3c2440-clock.c b/arch/arm/mach-s3c2440/clock.c
similarity index 96%
rename from arch/arm/mach-s3c2410/s3c2440-clock.c
rename to arch/arm/mach-s3c2440/clock.c
index ba13c1d..79e2ea4 100644
--- a/arch/arm/mach-s3c2410/s3c2440-clock.c
+++ b/arch/arm/mach-s3c2440/clock.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c2410/s3c2440-clock.c
+/* linux/arch/arm/mach-s3c2440/clock.c
*
* Copyright (c) 2004-2005 Simtec Electronics
* http://armlinux.simtec.co.uk/
@@ -41,8 +41,8 @@
#include <asm/arch/regs-clock.h>
-#include "clock.h"
-#include "cpu.h"
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/cpu.h>
/* S3C2440 extended clock support */
diff --git a/arch/arm/mach-s3c2410/s3c2440-dma.c b/arch/arm/mach-s3c2440/dma.c
similarity index 83%
rename from arch/arm/mach-s3c2410/s3c2440-dma.c
rename to arch/arm/mach-s3c2440/dma.c
index 47b861b..cd035a3 100644
--- a/arch/arm/mach-s3c2410/s3c2440-dma.c
+++ b/arch/arm/mach-s3c2440/dma.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c2410/s3c2440-dma.c
+/* linux/arch/arm/mach-s3c2440/dma.c
*
* Copyright (c) 2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
@@ -19,9 +19,9 @@
#include <asm/dma.h>
#include <asm/arch/dma.h>
-#include "dma.h"
-#include "cpu.h"
+#include <asm/plat-s3c24xx/dma.h>
+#include <asm/plat-s3c24xx/cpu.h>
#include <asm/arch/regs-serial.h>
#include <asm/arch/regs-gpio.h>
@@ -147,8 +147,53 @@
.map_size = ARRAY_SIZE(s3c2440_dma_mappings),
};
+static struct s3c24xx_dma_order __initdata s3c2440_dma_order = {
+ .channels = {
+ [DMACH_SDI] = {
+ .list = {
+ [0] = 3 | DMA_CH_VALID,
+ [1] = 2 | DMA_CH_VALID,
+ [2] = 1 | DMA_CH_VALID,
+ [3] = 0 | DMA_CH_VALID,
+ },
+ },
+ [DMACH_I2S_IN] = {
+ .list = {
+ [0] = 1 | DMA_CH_VALID,
+ [1] = 2 | DMA_CH_VALID,
+ },
+ },
+ [DMACH_I2S_OUT] = {
+ .list = {
+ [0] = 2 | DMA_CH_VALID,
+ [1] = 1 | DMA_CH_VALID,
+ },
+ },
+ [DMACH_PCM_IN] = {
+ .list = {
+ [0] = 2 | DMA_CH_VALID,
+ [1] = 1 | DMA_CH_VALID,
+ },
+ },
+ [DMACH_PCM_OUT] = {
+ .list = {
+ [0] = 1 | DMA_CH_VALID,
+ [1] = 3 | DMA_CH_VALID,
+ },
+ },
+ [DMACH_MIC_IN] = {
+ .list = {
+ [0] = 3 | DMA_CH_VALID,
+ [1] = 2 | DMA_CH_VALID,
+ },
+ },
+ },
+};
+
static int s3c2440_dma_add(struct sys_device *sysdev)
{
+ s3c2410_dma_init();
+ s3c24xx_dma_order_set(&s3c2440_dma_order);
return s3c24xx_dma_init_map(&s3c2440_dma_sel);
}
diff --git a/arch/arm/mach-s3c2410/s3c2440-dsc.c b/arch/arm/mach-s3c2440/dsc.c
similarity index 90%
rename from arch/arm/mach-s3c2410/s3c2440-dsc.c
rename to arch/arm/mach-s3c2440/dsc.c
index c92ea66..2995ff5 100644
--- a/arch/arm/mach-s3c2410/s3c2440-dsc.c
+++ b/arch/arm/mach-s3c2440/dsc.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c2410/s3c2440-dsc.c
+/* linux/arch/arm/mach-s3c2440/dsc.c
*
* Copyright (c) 2004-2005 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
@@ -27,8 +27,8 @@
#include <asm/arch/regs-gpio.h>
#include <asm/arch/regs-dsc.h>
-#include "cpu.h"
-#include "s3c2440.h"
+#include <asm/plat-s3c24xx/cpu.h>
+#include <asm/plat-s3c24xx/s3c2440.h>
int s3c2440_set_dsc(unsigned int pin, unsigned int value)
{
diff --git a/arch/arm/mach-s3c2410/s3c2440-irq.c b/arch/arm/mach-s3c2440/irq.c
similarity index 95%
rename from arch/arm/mach-s3c2410/s3c2440-irq.c
rename to arch/arm/mach-s3c2440/irq.c
index 1ba19b2..1069d13 100644
--- a/arch/arm/mach-s3c2410/s3c2440-irq.c
+++ b/arch/arm/mach-s3c2440/irq.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c2410/s3c2440-irq.c
+/* linux/arch/arm/mach-s3c2440/irq.c
*
* Copyright (c) 2003,2004 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
@@ -35,9 +35,9 @@
#include <asm/arch/regs-irq.h>
#include <asm/arch/regs-gpio.h>
-#include "cpu.h"
-#include "pm.h"
-#include "irq.h"
+#include <asm/plat-s3c24xx/cpu.h>
+#include <asm/plat-s3c24xx/pm.h>
+#include <asm/plat-s3c24xx/irq.h>
/* WDT/AC97 */
diff --git a/arch/arm/mach-s3c2410/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c
similarity index 97%
rename from arch/arm/mach-s3c2410/mach-anubis.c
rename to arch/arm/mach-s3c2440/mach-anubis.c
index 0fad0c2..3f0288e 100644
--- a/arch/arm/mach-s3c2410/mach-anubis.c
+++ b/arch/arm/mach-s3c2440/mach-anubis.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c2410/mach-anubis.c
+/* linux/arch/arm/mach-s3c2440/mach-anubis.c
*
* Copyright (c) 2003-2005 Simtec Electronics
* http://armlinux.simtec.co.uk/
@@ -42,9 +42,9 @@
#include <linux/mtd/nand_ecc.h>
#include <linux/mtd/partitions.h>
-#include "clock.h"
-#include "devs.h"
-#include "cpu.h"
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
#define COPYRIGHT ", (c) 2005 Simtec Electronics"
diff --git a/arch/arm/mach-s3c2410/mach-nexcoder.c b/arch/arm/mach-s3c2440/mach-nexcoder.c
similarity index 94%
rename from arch/arm/mach-s3c2410/mach-nexcoder.c
rename to arch/arm/mach-s3c2440/mach-nexcoder.c
index d6dfdad..6d551d8 100644
--- a/arch/arm/mach-s3c2410/mach-nexcoder.c
+++ b/arch/arm/mach-s3c2440/mach-nexcoder.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c2410/mach-nexcoder.c
+/* linux/arch/arm/mach-s3c2440/mach-nexcoder.c
*
* Copyright (c) 2004 Nex Vision
* Guillaume GOURAT <guillaume.gourat@nexvision.tv>
@@ -38,11 +38,11 @@
#include <asm/arch/regs-gpio.h>
#include <asm/arch/regs-serial.h>
-#include "s3c2410.h"
-#include "s3c2440.h"
-#include "clock.h"
-#include "devs.h"
-#include "cpu.h"
+#include <asm/plat-s3c24xx/s3c2410.h>
+#include <asm/plat-s3c24xx/s3c2440.h>
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
static struct map_desc nexcoder_iodesc[] __initdata = {
/* nothing here yet */
diff --git a/arch/arm/mach-s3c2410/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c
similarity index 97%
rename from arch/arm/mach-s3c2410/mach-osiris.c
rename to arch/arm/mach-s3c2440/mach-osiris.c
index 37b4085..2ed8e51 100644
--- a/arch/arm/mach-s3c2410/mach-osiris.c
+++ b/arch/arm/mach-s3c2440/mach-osiris.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c2410/mach-osiris.c
+/* linux/arch/arm/mach-s3c2440/mach-osiris.c
*
* Copyright (c) 2005 Simtec Electronics
* http://armlinux.simtec.co.uk/
@@ -41,9 +41,9 @@
#include <linux/mtd/nand_ecc.h>
#include <linux/mtd/partitions.h>
-#include "clock.h"
-#include "devs.h"
-#include "cpu.h"
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
/* onboard perihpheral map */
diff --git a/arch/arm/mach-s3c2410/mach-rx3715.c b/arch/arm/mach-s3c2440/mach-rx3715.c
similarity index 96%
rename from arch/arm/mach-s3c2410/mach-rx3715.c
rename to arch/arm/mach-s3c2440/mach-rx3715.c
index ecbcdf7..480ccde 100644
--- a/arch/arm/mach-s3c2410/mach-rx3715.c
+++ b/arch/arm/mach-s3c2440/mach-rx3715.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c2410/mach-rx3715.c
+/* linux/arch/arm/mach-s3c2440/mach-rx3715.c
*
* Copyright (c) 2003,2004 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
@@ -33,7 +33,6 @@
#include <asm/mach/irq.h>
#include <asm/hardware.h>
-#include <asm/hardware/iomd.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
@@ -46,10 +45,10 @@
#include <asm/arch/nand.h>
#include <asm/arch/fb.h>
-#include "clock.h"
-#include "devs.h"
-#include "cpu.h"
-#include "pm.h"
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
+#include <asm/plat-s3c24xx/pm.h>
static struct map_desc rx3715_iodesc[] __initdata = {
/* dump ISA space somewhere unused */
diff --git a/arch/arm/mach-s3c2410/mach-smdk2440.c b/arch/arm/mach-s3c2440/mach-smdk2440.c
similarity index 93%
rename from arch/arm/mach-s3c2410/mach-smdk2440.c
rename to arch/arm/mach-s3c2440/mach-smdk2440.c
index 2b61f4e..c17eb5b 100644
--- a/arch/arm/mach-s3c2410/mach-smdk2440.c
+++ b/arch/arm/mach-s3c2440/mach-smdk2440.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c2410/mach-smdk2440.c
+/* linux/arch/arm/mach-s3c2440/mach-smdk2440.c
*
* Copyright (c) 2004,2005 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
@@ -27,12 +27,10 @@
#include <asm/mach/irq.h>
#include <asm/hardware.h>
-#include <asm/hardware/iomd.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
-//#include <asm/debug-ll.h>
#include <asm/arch/regs-serial.h>
#include <asm/arch/regs-gpio.h>
#include <asm/arch/regs-lcd.h>
@@ -40,13 +38,13 @@
#include <asm/arch/idle.h>
#include <asm/arch/fb.h>
-#include "s3c2410.h"
-#include "s3c2440.h"
-#include "clock.h"
-#include "devs.h"
-#include "cpu.h"
+#include <asm/plat-s3c24xx/s3c2410.h>
+#include <asm/plat-s3c24xx/s3c2440.h>
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
-#include "common-smdk.h"
+#include <asm/plat-s3c24xx/common-smdk.h>
static struct map_desc smdk2440_iodesc[] __initdata = {
/* ISA IO Space map (memory space selected by A24) */
@@ -144,6 +142,7 @@
#endif
.lpcsel = ((0xCE6) & ~7) | 1<<4,
+ .type = S3C2410_LCDCON1_TFT16BPP,
.width = 240,
.height = 320,
diff --git a/arch/arm/mach-s3c2410/s3c2440.c b/arch/arm/mach-s3c2440/s3c2440.c
similarity index 88%
rename from arch/arm/mach-s3c2410/s3c2440.c
rename to arch/arm/mach-s3c2440/s3c2440.c
index 344eb27..90e1da6 100644
--- a/arch/arm/mach-s3c2410/s3c2440.c
+++ b/arch/arm/mach-s3c2440/s3c2440.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c2410/s3c2440.c
+/* linux/arch/arm/mach-s3c2440/s3c2440.c
*
* Copyright (c) 2004-2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
@@ -29,9 +29,9 @@
#include <asm/io.h>
#include <asm/irq.h>
-#include "s3c2440.h"
-#include "devs.h"
-#include "cpu.h"
+#include <asm/plat-s3c24xx/s3c2440.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
static struct sys_device s3c2440_sysdev = {
.cls = &s3c2440_sysclass,
diff --git a/arch/arm/mach-s3c2442/Kconfig b/arch/arm/mach-s3c2442/Kconfig
new file mode 100644
index 0000000..bf8d87a
--- /dev/null
+++ b/arch/arm/mach-s3c2442/Kconfig
@@ -0,0 +1,27 @@
+# arch/arm/mach-s3c2442/Kconfig
+#
+# Copyright 2007 Simtec Electronics
+#
+# Licensed under GPLv2
+
+config CPU_S3C2442
+ bool
+ depends on ARCH_S3C2420
+ select S3C2410_CLOCK
+ select S3C2410_GPIO
+ select S3C2410_PM if PM
+ select CPU_S3C244X
+ help
+ Support for S3C2442 Samsung Mobile CPU based systems.
+
+
+menu "S3C2442 Machines"
+
+config SMDK2440_CPU2442
+ bool "SMDM2440 with S3C2442 CPU module"
+ depends on ARCH_S3C2440
+ select CPU_S3C2442
+
+
+endmenu
+
diff --git a/arch/arm/mach-s3c2442/Makefile b/arch/arm/mach-s3c2442/Makefile
new file mode 100644
index 0000000..2a909c6
--- /dev/null
+++ b/arch/arm/mach-s3c2442/Makefile
@@ -0,0 +1,16 @@
+# arch/arm/mach-s3c2442/Makefile
+#
+# Copyright 2007 Simtec Electronics
+#
+# Licensed under GPLv2
+
+obj-y :=
+obj-m :=
+obj-n :=
+obj- :=
+
+obj-$(CONFIG_CPU_S3C2442) += s3c2442.o
+obj-$(CONFIG_CPU_S3C2442) += clock.o
+
+# Machine support
+
diff --git a/arch/arm/mach-s3c2410/s3c2442-clock.c b/arch/arm/mach-s3c2442/clock.c
similarity index 96%
rename from arch/arm/mach-s3c2410/s3c2442-clock.c
rename to arch/arm/mach-s3c2442/clock.c
index 4e292ca..5b9e830 100644
--- a/arch/arm/mach-s3c2410/s3c2442-clock.c
+++ b/arch/arm/mach-s3c2442/clock.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c2410/s3c2442-clock.c
+/* linux/arch/arm/mach-s3c2442/clock.c
*
* Copyright (c) 2004-2005 Simtec Electronics
* http://armlinux.simtec.co.uk/
@@ -41,8 +41,8 @@
#include <asm/arch/regs-clock.h>
-#include "clock.h"
-#include "cpu.h"
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/cpu.h>
/* S3C2442 extended clock support */
diff --git a/arch/arm/mach-s3c2410/s3c2442.c b/arch/arm/mach-s3c2442/s3c2442.c
similarity index 86%
rename from arch/arm/mach-s3c2410/s3c2442.c
rename to arch/arm/mach-s3c2442/s3c2442.c
index 428732e..fbf8264 100644
--- a/arch/arm/mach-s3c2410/s3c2442.c
+++ b/arch/arm/mach-s3c2442/s3c2442.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c2410/s3c2442.c
+/* linux/arch/arm/mach-s3c2442/s3c2442.c
*
* Copyright (c) 2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
@@ -19,8 +19,8 @@
#include <linux/serial_core.h>
#include <linux/sysdev.h>
-#include "s3c2442.h"
-#include "cpu.h"
+#include <asm/plat-s3c24xx/s3c2442.h>
+#include <asm/plat-s3c24xx/cpu.h>
static struct sys_device s3c2442_sysdev = {
.cls = &s3c2442_sysclass,
diff --git a/arch/arm/mach-s3c2443/Kconfig b/arch/arm/mach-s3c2443/Kconfig
new file mode 100644
index 0000000..c649bb2
--- /dev/null
+++ b/arch/arm/mach-s3c2443/Kconfig
@@ -0,0 +1,29 @@
+# arch/arm/mach-s3c2443/Kconfig
+#
+# Copyright 2007 Simtec Electronics
+#
+# Licensed under GPLv2
+
+config CPU_S3C2443
+ bool
+ depends on ARCH_S3C2410
+ select S3C2443_DMA if S3C2410_DMA
+ help
+ Support for the S3C2443 SoC from the S3C24XX line
+
+config S3C2443_DMA
+ bool
+ depends on CPU_S3C2443
+ help
+ Internal config node for S3C2443 DMA support
+
+menu "S3C2443 Machines"
+
+config MACH_SMDK2443
+ bool "SMDK2443"
+ select CPU_S3C2443
+ select MACH_SMDK
+ help
+ Say Y here if you are using an SMDK2443
+
+endmenu
diff --git a/arch/arm/mach-s3c2443/Makefile b/arch/arm/mach-s3c2443/Makefile
new file mode 100644
index 0000000..d1843c9
--- /dev/null
+++ b/arch/arm/mach-s3c2443/Makefile
@@ -0,0 +1,20 @@
+# arch/arm/mach-s3c2443/Makefile
+#
+# Copyright 2007 Simtec Electronics
+#
+# Licensed under GPLv2
+
+obj-y :=
+obj-m :=
+obj-n :=
+obj- :=
+
+obj-$(CONFIG_CPU_S3C2443) += s3c2443.o
+obj-$(CONFIG_CPU_S3C2443) += irq.o
+obj-$(CONFIG_CPU_S3C2443) += clock.o
+
+obj-$(CONFIG_S3C2443_DMA) += dma.o
+
+# Machine support
+
+obj-$(CONFIG_MACH_SMDK2443) += mach-smdk2443.o
diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c2443/clock.c
new file mode 100644
index 0000000..dd2272f
--- /dev/null
+++ b/arch/arm/mach-s3c2443/clock.c
@@ -0,0 +1,1007 @@
+/* linux/arch/arm/mach-s3c2443/clock.c
+ *
+ * Copyright (c) 2007 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2443 Clock control support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/sysdev.h>
+#include <linux/clk.h>
+#include <linux/mutex.h>
+#include <linux/delay.h>
+#include <linux/serial_core.h>
+
+#include <asm/mach/map.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+
+#include <asm/arch/regs-s3c2443-clock.h>
+
+#include <asm/plat-s3c24xx/s3c2443.h>
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/cpu.h>
+
+/* We currently have to assume that the system is running
+ * from the XTPll input, and that all ***REFCLKs are being
+ * fed from it, as we cannot read the state of OM[4] from
+ * software.
+ *
+ * It would be possible for each board initialisation to
+ * set the correct muxing at initialisation
+*/
+
+static int s3c2443_clkcon_enable_h(struct clk *clk, int enable)
+{
+ unsigned int clocks = clk->ctrlbit;
+ unsigned long clkcon;
+
+ clkcon = __raw_readl(S3C2443_HCLKCON);
+
+ if (enable)
+ clkcon |= clocks;
+ else
+ clkcon &= ~clocks;
+
+ __raw_writel(clkcon, S3C2443_HCLKCON);
+
+ return 0;
+}
+
+static int s3c2443_clkcon_enable_p(struct clk *clk, int enable)
+{
+ unsigned int clocks = clk->ctrlbit;
+ unsigned long clkcon;
+
+ clkcon = __raw_readl(S3C2443_PCLKCON);
+
+ if (enable)
+ clkcon |= clocks;
+ else
+ clkcon &= ~clocks;
+
+ __raw_writel(clkcon, S3C2443_HCLKCON);
+
+ return 0;
+}
+
+static int s3c2443_clkcon_enable_s(struct clk *clk, int enable)
+{
+ unsigned int clocks = clk->ctrlbit;
+ unsigned long clkcon;
+
+ clkcon = __raw_readl(S3C2443_SCLKCON);
+
+ if (enable)
+ clkcon |= clocks;
+ else
+ clkcon &= ~clocks;
+
+ __raw_writel(clkcon, S3C2443_SCLKCON);
+
+ return 0;
+}
+
+static unsigned long s3c2443_roundrate_clksrc(struct clk *clk,
+ unsigned long rate,
+ unsigned int max)
+{
+ unsigned long parent_rate = clk_get_rate(clk->parent);
+ int div;
+
+ if (rate > parent_rate)
+ return parent_rate;
+
+ /* note, we remove the +/- 1 calculations as they cancel out */
+
+ div = (rate / parent_rate);
+
+ if (div < 1)
+ div = 1;
+ else if (div > max)
+ div = max;
+
+ return parent_rate / div;
+}
+
+static unsigned long s3c2443_roundrate_clksrc4(struct clk *clk,
+ unsigned long rate)
+{
+ return s3c2443_roundrate_clksrc(clk, rate, 4);
+}
+
+static unsigned long s3c2443_roundrate_clksrc16(struct clk *clk,
+ unsigned long rate)
+{
+ return s3c2443_roundrate_clksrc(clk, rate, 16);
+}
+
+static unsigned long s3c2443_roundrate_clksrc256(struct clk *clk,
+ unsigned long rate)
+{
+ return s3c2443_roundrate_clksrc(clk, rate, 256);
+}
+
+/* clock selections */
+
+/* CPU EXTCLK input */
+static struct clk clk_ext = {
+ .name = "ext",
+ .id = -1,
+};
+
+static struct clk clk_mpllref = {
+ .name = "mpllref",
+ .parent = &clk_xtal,
+ .id = -1,
+};
+
+#if 0
+static struct clk clk_mpll = {
+ .name = "mpll",
+ .parent = &clk_mpllref,
+ .id = -1,
+};
+#endif
+
+static struct clk clk_epllref;
+
+static struct clk clk_epll = {
+ .name = "epll",
+ .parent = &clk_epllref,
+ .id = -1,
+};
+
+static struct clk clk_i2s_ext = {
+ .name = "i2s-ext",
+ .id = -1,
+};
+
+static int s3c2443_setparent_epllref(struct clk *clk, struct clk *parent)
+{
+ unsigned long clksrc = __raw_readl(S3C2443_CLKSRC);
+
+ clksrc &= ~S3C2443_CLKSRC_EPLLREF_MASK;
+
+ if (parent == &clk_xtal)
+ clksrc |= S3C2443_CLKSRC_EPLLREF_XTAL;
+ else if (parent == &clk_ext)
+ clksrc |= S3C2443_CLKSRC_EPLLREF_EXTCLK;
+ else if (parent != &clk_mpllref)
+ return -EINVAL;
+
+ __raw_writel(clksrc, S3C2443_CLKSRC);
+ clk->parent = parent;
+
+ return 0;
+}
+
+static struct clk clk_epllref = {
+ .name = "epllref",
+ .id = -1,
+ .set_parent = s3c2443_setparent_epllref,
+};
+
+static unsigned long s3c2443_getrate_mdivclk(struct clk *clk)
+{
+ unsigned long parent_rate = clk_get_rate(clk->parent);
+ unsigned long div = __raw_readl(S3C2443_CLKDIV0);
+
+ div &= S3C2443_CLKDIV0_EXTDIV_MASK;
+ div >>= (S3C2443_CLKDIV0_EXTDIV_SHIFT-1); /* x2 */
+
+ return parent_rate / (div + 1);
+}
+
+static struct clk clk_mdivclk = {
+ .name = "mdivclk",
+ .parent = &clk_mpllref,
+ .id = -1,
+ .get_rate = s3c2443_getrate_mdivclk,
+};
+
+
+static int s3c2443_setparent_msysclk(struct clk *clk, struct clk *parent)
+{
+ unsigned long clksrc = __raw_readl(S3C2443_CLKSRC);
+
+ clksrc &= ~(S3C2443_CLKSRC_MSYSCLK_MPLL |
+ S3C2443_CLKSRC_EXTCLK_DIV);
+
+ if (parent == &clk_mpll)
+ clksrc |= S3C2443_CLKSRC_MSYSCLK_MPLL;
+ else if (parent == &clk_mdivclk)
+ clksrc |= S3C2443_CLKSRC_EXTCLK_DIV;
+ else if (parent != &clk_mpllref)
+ return -EINVAL;
+
+ __raw_writel(clksrc, S3C2443_CLKSRC);
+ clk->parent = parent;
+
+ return 0;
+}
+
+static struct clk clk_msysclk = {
+ .name = "msysclk",
+ .parent = &clk_xtal,
+ .id = -1,
+ .set_parent = s3c2443_setparent_msysclk,
+};
+
+
+/* esysclk
+ *
+ * this is sourced from either the EPLL or the EPLLref clock
+*/
+
+static int s3c2443_setparent_esysclk(struct clk *clk, struct clk *parent)
+{
+ unsigned long clksrc = __raw_readl(S3C2443_CLKSRC);
+
+ if (parent == &clk_epll)
+ clksrc |= S3C2443_CLKSRC_ESYSCLK_EPLL;
+ else if (parent == &clk_epllref)
+ clksrc &= ~S3C2443_CLKSRC_ESYSCLK_EPLL;
+ else
+ return -EINVAL;
+
+ __raw_writel(clksrc, S3C2443_CLKSRC);
+ clk->parent = parent;
+
+ return 0;
+}
+
+static struct clk clk_esysclk = {
+ .name = "esysclk",
+ .parent = &clk_epll,
+ .id = -1,
+ .set_parent = s3c2443_setparent_esysclk,
+};
+
+/* uartclk
+ *
+ * UART baud-rate clock sourced from esysclk via a divisor
+*/
+
+static unsigned long s3c2443_getrate_uart(struct clk *clk)
+{
+ unsigned long parent_rate = clk_get_rate(clk->parent);
+ unsigned long div = __raw_readl(S3C2443_CLKDIV1);
+
+ div &= S3C2443_CLKDIV1_UARTDIV_MASK;
+ div >>= S3C2443_CLKDIV1_UARTDIV_SHIFT;
+
+ return parent_rate / (div + 1);
+}
+
+
+static int s3c2443_setrate_uart(struct clk *clk, unsigned long rate)
+{
+ unsigned long parent_rate = clk_get_rate(clk->parent);
+ unsigned long clkdivn = __raw_readl(S3C2443_CLKDIV1);
+
+ rate = s3c2443_roundrate_clksrc16(clk, rate);
+ rate = parent_rate / rate;
+
+ clkdivn &= ~S3C2443_CLKDIV1_UARTDIV_MASK;
+ clkdivn |= (rate - 1) << S3C2443_CLKDIV1_UARTDIV_SHIFT;
+
+ __raw_writel(clkdivn, S3C2443_CLKDIV1);
+ return 0;
+}
+
+static struct clk clk_uart = {
+ .name = "uartclk",
+ .id = -1,
+ .parent = &clk_esysclk,
+ .get_rate = s3c2443_getrate_uart,
+ .set_rate = s3c2443_setrate_uart,
+ .round_rate = s3c2443_roundrate_clksrc16,
+};
+
+/* hsspi
+ *
+ * high-speed spi clock, sourced from esysclk
+*/
+
+static unsigned long s3c2443_getrate_hsspi(struct clk *clk)
+{
+ unsigned long parent_rate = clk_get_rate(clk->parent);
+ unsigned long div = __raw_readl(S3C2443_CLKDIV1);
+
+ div &= S3C2443_CLKDIV1_HSSPIDIV_MASK;
+ div >>= S3C2443_CLKDIV1_HSSPIDIV_SHIFT;
+
+ return parent_rate / (div + 1);
+}
+
+
+static int s3c2443_setrate_hsspi(struct clk *clk, unsigned long rate)
+{
+ unsigned long parent_rate = clk_get_rate(clk->parent);
+ unsigned long clkdivn = __raw_readl(S3C2443_CLKDIV1);
+
+ rate = s3c2443_roundrate_clksrc4(clk, rate);
+ rate = parent_rate / rate;
+
+ clkdivn &= ~S3C2443_CLKDIV1_HSSPIDIV_MASK;
+ clkdivn |= (rate - 1) << S3C2443_CLKDIV1_HSSPIDIV_SHIFT;
+
+ __raw_writel(clkdivn, S3C2443_CLKDIV1);
+ return 0;
+}
+
+static struct clk clk_hsspi = {
+ .name = "hsspi",
+ .id = -1,
+ .parent = &clk_esysclk,
+ .ctrlbit = S3C2443_SCLKCON_HSSPICLK,
+ .enable = s3c2443_clkcon_enable_s,
+ .get_rate = s3c2443_getrate_hsspi,
+ .set_rate = s3c2443_setrate_hsspi,
+ .round_rate = s3c2443_roundrate_clksrc4,
+};
+
+/* usbhost
+ *
+ * usb host bus-clock, usually 48MHz to provide USB bus clock timing
+*/
+
+static unsigned long s3c2443_getrate_usbhost(struct clk *clk)
+{
+ unsigned long parent_rate = clk_get_rate(clk->parent);
+ unsigned long div = __raw_readl(S3C2443_CLKDIV1);
+
+ div &= S3C2443_CLKDIV1_USBHOSTDIV_MASK;
+ div >>= S3C2443_CLKDIV1_USBHOSTDIV_SHIFT;
+
+ return parent_rate / (div + 1);
+}
+
+static int s3c2443_setrate_usbhost(struct clk *clk, unsigned long rate)
+{
+ unsigned long parent_rate = clk_get_rate(clk->parent);
+ unsigned long clkdivn = __raw_readl(S3C2443_CLKDIV1);
+
+ rate = s3c2443_roundrate_clksrc4(clk, rate);
+ rate = parent_rate / rate;
+
+ clkdivn &= ~S3C2443_CLKDIV1_USBHOSTDIV_MASK;
+ clkdivn |= (rate - 1) << S3C2443_CLKDIV1_USBHOSTDIV_SHIFT;
+
+ __raw_writel(clkdivn, S3C2443_CLKDIV1);
+ return 0;
+}
+
+struct clk clk_usb_bus_host = {
+ .name = "usb-bus-host-parent",
+ .id = -1,
+ .parent = &clk_esysclk,
+ .ctrlbit = S3C2443_SCLKCON_USBHOST,
+ .enable = s3c2443_clkcon_enable_s,
+ .get_rate = s3c2443_getrate_usbhost,
+ .set_rate = s3c2443_setrate_usbhost,
+ .round_rate = s3c2443_roundrate_clksrc4,
+};
+
+/* clk_hsmcc_div
+ *
+ * this clock is sourced from epll, and is fed through a divider,
+ * to a mux controlled by sclkcon where either it or a extclk can
+ * be fed to the hsmmc block
+*/
+
+static unsigned long s3c2443_getrate_hsmmc_div(struct clk *clk)
+{
+ unsigned long parent_rate = clk_get_rate(clk->parent);
+ unsigned long div = __raw_readl(S3C2443_CLKDIV1);
+
+ div &= S3C2443_CLKDIV1_HSMMCDIV_MASK;
+ div >>= S3C2443_CLKDIV1_HSMMCDIV_SHIFT;
+
+ return parent_rate / (div + 1);
+}
+
+static int s3c2443_setrate_hsmmc_div(struct clk *clk, unsigned long rate)
+{
+ unsigned long parent_rate = clk_get_rate(clk->parent);
+ unsigned long clkdivn = __raw_readl(S3C2443_CLKDIV1);
+
+ rate = s3c2443_roundrate_clksrc4(clk, rate);
+ rate = parent_rate / rate;
+
+ clkdivn &= ~S3C2443_CLKDIV1_HSMMCDIV_MASK;
+ clkdivn |= (rate - 1) << S3C2443_CLKDIV1_HSMMCDIV_SHIFT;
+
+ __raw_writel(clkdivn, S3C2443_CLKDIV1);
+ return 0;
+}
+
+static struct clk clk_hsmmc_div = {
+ .name = "hsmmc-div",
+ .id = -1,
+ .parent = &clk_esysclk,
+ .get_rate = s3c2443_getrate_hsmmc_div,
+ .set_rate = s3c2443_setrate_hsmmc_div,
+ .round_rate = s3c2443_roundrate_clksrc4,
+};
+
+static int s3c2443_setparent_hsmmc(struct clk *clk, struct clk *parent)
+{
+ unsigned long clksrc = __raw_readl(S3C2443_SCLKCON);
+
+ clksrc &= ~(S3C2443_SCLKCON_HSMMCCLK_EXT |
+ S3C2443_SCLKCON_HSMMCCLK_EPLL);
+
+ if (parent == &clk_epll)
+ clksrc |= S3C2443_SCLKCON_HSMMCCLK_EPLL;
+ else if (parent == &clk_ext)
+ clksrc |= S3C2443_SCLKCON_HSMMCCLK_EXT;
+ else
+ return -EINVAL;
+
+ if (clk->usage > 0) {
+ __raw_writel(clksrc, S3C2443_SCLKCON);
+ }
+
+ clk->parent = parent;
+ return 0;
+}
+
+static int s3c2443_enable_hsmmc(struct clk *clk, int enable)
+{
+ return s3c2443_setparent_hsmmc(clk, clk->parent);
+}
+
+static struct clk clk_hsmmc = {
+ .name = "hsmmc-if",
+ .id = -1,
+ .parent = &clk_hsmmc_div,
+ .enable = s3c2443_enable_hsmmc,
+ .set_parent = s3c2443_setparent_hsmmc,
+};
+
+/* i2s_eplldiv
+ *
+ * this clock is the output from the i2s divisor of esysclk
+*/
+
+static unsigned long s3c2443_getrate_i2s_eplldiv(struct clk *clk)
+{
+ unsigned long parent_rate = clk_get_rate(clk->parent);
+ unsigned long div = __raw_readl(S3C2443_CLKDIV1);
+
+ div &= S3C2443_CLKDIV1_I2SDIV_MASK;
+ div >>= S3C2443_CLKDIV1_I2SDIV_SHIFT;
+
+ return parent_rate / (div + 1);
+}
+
+static int s3c2443_setrate_i2s_eplldiv(struct clk *clk, unsigned long rate)
+{
+ unsigned long parent_rate = clk_get_rate(clk->parent);
+ unsigned long clkdivn = __raw_readl(S3C2443_CLKDIV1);
+
+ rate = s3c2443_roundrate_clksrc16(clk, rate);
+ rate = parent_rate / rate;
+
+ clkdivn &= ~S3C2443_CLKDIV1_I2SDIV_MASK;
+ clkdivn |= (rate - 1) << S3C2443_CLKDIV1_I2SDIV_SHIFT;
+
+ __raw_writel(clkdivn, S3C2443_CLKDIV1);
+ return 0;
+}
+
+static struct clk clk_i2s_eplldiv = {
+ .name = "i2s-eplldiv",
+ .id = -1,
+ .parent = &clk_esysclk,
+ .get_rate = s3c2443_getrate_i2s_eplldiv,
+ .set_rate = s3c2443_setrate_i2s_eplldiv,
+ .round_rate = s3c2443_roundrate_clksrc16,
+};
+
+/* i2s-ref
+ *
+ * i2s bus reference clock, selectable from external, esysclk or epllref
+*/
+
+static int s3c2443_setparent_i2s(struct clk *clk, struct clk *parent)
+{
+ unsigned long clksrc = __raw_readl(S3C2443_CLKSRC);
+
+ clksrc &= ~S3C2443_CLKSRC_I2S_MASK;
+
+ if (parent == &clk_epllref)
+ clksrc |= S3C2443_CLKSRC_I2S_EPLLREF;
+ else if (parent == &clk_i2s_ext)
+ clksrc |= S3C2443_CLKSRC_I2S_EXT;
+ else if (parent != &clk_i2s_eplldiv)
+ return -EINVAL;
+
+ clk->parent = parent;
+ __raw_writel(clksrc, S3C2443_CLKSRC);
+
+ return 0;
+}
+
+static struct clk clk_i2s = {
+ .name = "i2s-if",
+ .id = -1,
+ .parent = &clk_i2s_eplldiv,
+ .ctrlbit = S3C2443_SCLKCON_I2SCLK,
+ .enable = s3c2443_clkcon_enable_s,
+ .set_parent = s3c2443_setparent_i2s,
+};
+
+/* cam-if
+ *
+ * camera interface bus-clock, divided down from esysclk
+*/
+
+static unsigned long s3c2443_getrate_cam(struct clk *clk)
+{
+ unsigned long parent_rate = clk_get_rate(clk->parent);
+ unsigned long div = __raw_readl(S3C2443_CLKDIV1);
+
+ div &= S3C2443_CLKDIV1_CAMDIV_MASK;
+ div >>= S3C2443_CLKDIV1_CAMDIV_SHIFT;
+
+ return parent_rate / (div + 1);
+}
+
+static int s3c2443_setrate_cam(struct clk *clk, unsigned long rate)
+{
+ unsigned long parent_rate = clk_get_rate(clk->parent);
+ unsigned long clkdiv1 = __raw_readl(S3C2443_CLKDIV1);
+
+ rate = s3c2443_roundrate_clksrc16(clk, rate);
+ rate = parent_rate / rate;
+
+ clkdiv1 &= ~S3C2443_CLKDIV1_CAMDIV_MASK;
+ clkdiv1 |= (rate - 1) << S3C2443_CLKDIV1_CAMDIV_SHIFT;
+
+ __raw_writel(clkdiv1, S3C2443_CLKDIV1);
+ return 0;
+}
+
+static struct clk clk_cam = {
+ .name = "camif-upll", /* same as 2440 name */
+ .id = -1,
+ .parent = &clk_esysclk,
+ .ctrlbit = S3C2443_SCLKCON_CAMCLK,
+ .enable = s3c2443_clkcon_enable_s,
+ .get_rate = s3c2443_getrate_cam,
+ .set_rate = s3c2443_setrate_cam,
+ .round_rate = s3c2443_roundrate_clksrc16,
+};
+
+/* display-if
+ *
+ * display interface clock, divided from esysclk
+*/
+
+static unsigned long s3c2443_getrate_display(struct clk *clk)
+{
+ unsigned long parent_rate = clk_get_rate(clk->parent);
+ unsigned long div = __raw_readl(S3C2443_CLKDIV1);
+
+ div &= S3C2443_CLKDIV1_DISPDIV_MASK;
+ div >>= S3C2443_CLKDIV1_DISPDIV_SHIFT;
+
+ return parent_rate / (div + 1);
+}
+
+static int s3c2443_setrate_display(struct clk *clk, unsigned long rate)
+{
+ unsigned long parent_rate = clk_get_rate(clk->parent);
+ unsigned long clkdivn = __raw_readl(S3C2443_CLKDIV1);
+
+ rate = s3c2443_roundrate_clksrc256(clk, rate);
+ rate = parent_rate / rate;
+
+ clkdivn &= ~S3C2443_CLKDIV1_UARTDIV_MASK;
+ clkdivn |= (rate - 1) << S3C2443_CLKDIV1_UARTDIV_SHIFT;
+
+ __raw_writel(clkdivn, S3C2443_CLKDIV1);
+ return 0;
+}
+
+static struct clk clk_display = {
+ .name = "display-if",
+ .id = -1,
+ .parent = &clk_esysclk,
+ .ctrlbit = S3C2443_SCLKCON_DISPCLK,
+ .enable = s3c2443_clkcon_enable_s,
+ .get_rate = s3c2443_getrate_display,
+ .set_rate = s3c2443_setrate_display,
+ .round_rate = s3c2443_roundrate_clksrc256,
+};
+
+/* standard clock definitions */
+
+static struct clk init_clocks_disable[] = {
+ {
+ .name = "nand",
+ .id = -1,
+ .parent = &clk_h,
+ }, {
+ .name = "sdi",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s3c2443_clkcon_enable_p,
+ .ctrlbit = S3C2443_PCLKCON_SDI,
+ }, {
+ .name = "adc",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s3c2443_clkcon_enable_p,
+ .ctrlbit = S3C2443_PCLKCON_ADC,
+ }, {
+ .name = "i2c",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s3c2443_clkcon_enable_p,
+ .ctrlbit = S3C2443_PCLKCON_IIC,
+ }, {
+ .name = "iis",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s3c2443_clkcon_enable_p,
+ .ctrlbit = S3C2443_PCLKCON_IIS,
+ }, {
+ .name = "spi",
+ .id = 0,
+ .parent = &clk_p,
+ .enable = s3c2443_clkcon_enable_p,
+ .ctrlbit = S3C2443_PCLKCON_SPI0,
+ }, {
+ .name = "spi",
+ .id = 1,
+ .parent = &clk_p,
+ .enable = s3c2443_clkcon_enable_p,
+ .ctrlbit = S3C2443_PCLKCON_SPI1,
+ }
+};
+
+static struct clk init_clocks[] = {
+ {
+ .name = "dma",
+ .id = 0,
+ .parent = &clk_h,
+ .enable = s3c2443_clkcon_enable_h,
+ .ctrlbit = S3C2443_HCLKCON_DMA0,
+ }, {
+ .name = "dma",
+ .id = 1,
+ .parent = &clk_h,
+ .enable = s3c2443_clkcon_enable_h,
+ .ctrlbit = S3C2443_HCLKCON_DMA1,
+ }, {
+ .name = "dma",
+ .id = 2,
+ .parent = &clk_h,
+ .enable = s3c2443_clkcon_enable_h,
+ .ctrlbit = S3C2443_HCLKCON_DMA2,
+ }, {
+ .name = "dma",
+ .id = 3,
+ .parent = &clk_h,
+ .enable = s3c2443_clkcon_enable_h,
+ .ctrlbit = S3C2443_HCLKCON_DMA3,
+ }, {
+ .name = "dma",
+ .id = 4,
+ .parent = &clk_h,
+ .enable = s3c2443_clkcon_enable_h,
+ .ctrlbit = S3C2443_HCLKCON_DMA4,
+ }, {
+ .name = "dma",
+ .id = 5,
+ .parent = &clk_h,
+ .enable = s3c2443_clkcon_enable_h,
+ .ctrlbit = S3C2443_HCLKCON_DMA5,
+ }, {
+ .name = "lcd",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s3c2443_clkcon_enable_h,
+ .ctrlbit = S3C2443_HCLKCON_LCDC,
+ }, {
+ .name = "gpio",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s3c2443_clkcon_enable_p,
+ .ctrlbit = S3C2443_PCLKCON_GPIO,
+ }, {
+ .name = "usb-host",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s3c2443_clkcon_enable_h,
+ .ctrlbit = S3C2443_HCLKCON_USBH,
+ }, {
+ .name = "usb-device",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s3c2443_clkcon_enable_h,
+ .ctrlbit = S3C2443_HCLKCON_USBD,
+ }, {
+ .name = "timers",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s3c2443_clkcon_enable_p,
+ .ctrlbit = S3C2443_PCLKCON_PWMT,
+ }, {
+ .name = "uart",
+ .id = 0,
+ .parent = &clk_p,
+ .enable = s3c2443_clkcon_enable_p,
+ .ctrlbit = S3C2443_PCLKCON_UART0,
+ }, {
+ .name = "uart",
+ .id = 1,
+ .parent = &clk_p,
+ .enable = s3c2443_clkcon_enable_p,
+ .ctrlbit = S3C2443_PCLKCON_UART1,
+ }, {
+ .name = "uart",
+ .id = 2,
+ .parent = &clk_p,
+ .enable = s3c2443_clkcon_enable_p,
+ .ctrlbit = S3C2443_PCLKCON_UART2,
+ }, {
+ .name = "uart",
+ .id = 3,
+ .parent = &clk_p,
+ .enable = s3c2443_clkcon_enable_p,
+ .ctrlbit = S3C2443_PCLKCON_UART3,
+ }, {
+ .name = "rtc",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s3c2443_clkcon_enable_p,
+ .ctrlbit = S3C2443_PCLKCON_RTC,
+ }, {
+ .name = "watchdog",
+ .id = -1,
+ .parent = &clk_p,
+ .ctrlbit = S3C2443_PCLKCON_WDT,
+ }, {
+ .name = "usb-bus-host",
+ .id = -1,
+ .parent = &clk_usb_bus_host,
+ }
+};
+
+/* clocks to add where we need to check their parentage */
+
+/* s3c2443_clk_initparents
+ *
+ * Initialise the parents for the clocks that we get at start-time
+*/
+
+static int __init clk_init_set_parent(struct clk *clk, struct clk *parent)
+{
+ printk(KERN_DEBUG "clock %s: parent %s\n", clk->name, parent->name);
+ return clk_set_parent(clk, parent);
+}
+
+static void __init s3c2443_clk_initparents(void)
+{
+ unsigned long clksrc = __raw_readl(S3C2443_CLKSRC);
+ struct clk *parent;
+
+ switch (clksrc & S3C2443_CLKSRC_EPLLREF_MASK) {
+ case S3C2443_CLKSRC_EPLLREF_EXTCLK:
+ parent = &clk_ext;
+ break;
+
+ case S3C2443_CLKSRC_EPLLREF_XTAL:
+ default:
+ parent = &clk_xtal;
+ break;
+
+ case S3C2443_CLKSRC_EPLLREF_MPLLREF:
+ case S3C2443_CLKSRC_EPLLREF_MPLLREF2:
+ parent = &clk_mpllref;
+ break;
+ }
+
+ clk_init_set_parent(&clk_epllref, parent);
+
+ switch (clksrc & S3C2443_CLKSRC_I2S_MASK) {
+ case S3C2443_CLKSRC_I2S_EXT:
+ parent = &clk_i2s_ext;
+ break;
+
+ case S3C2443_CLKSRC_I2S_EPLLDIV:
+ default:
+ parent = &clk_i2s_eplldiv;
+ break;
+
+ case S3C2443_CLKSRC_I2S_EPLLREF:
+ case S3C2443_CLKSRC_I2S_EPLLREF3:
+ parent = &clk_epllref;
+ }
+
+ clk_init_set_parent(&clk_i2s, &clk_epllref);
+
+ /* esysclk source */
+
+ parent = (clksrc & S3C2443_CLKSRC_ESYSCLK_EPLL) ?
+ &clk_epll : &clk_epllref;
+
+ clk_init_set_parent(&clk_esysclk, parent);
+
+ /* msysclk source */
+
+ if (clksrc & S3C2443_CLKSRC_MSYSCLK_MPLL) {
+ parent = &clk_mpll;
+ } else {
+ parent = (clksrc & S3C2443_CLKSRC_EXTCLK_DIV) ?
+ &clk_mdivclk : &clk_mpllref;
+ }
+
+ clk_init_set_parent(&clk_msysclk, parent);
+}
+
+/* armdiv divisor table */
+
+static unsigned int armdiv[16] = {
+ [S3C2443_CLKDIV0_ARMDIV_1 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 1,
+ [S3C2443_CLKDIV0_ARMDIV_2 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 2,
+ [S3C2443_CLKDIV0_ARMDIV_3 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 3,
+ [S3C2443_CLKDIV0_ARMDIV_4 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 4,
+ [S3C2443_CLKDIV0_ARMDIV_6 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 6,
+ [S3C2443_CLKDIV0_ARMDIV_8 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 8,
+ [S3C2443_CLKDIV0_ARMDIV_12 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 12,
+ [S3C2443_CLKDIV0_ARMDIV_16 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 16,
+};
+
+static inline unsigned int s3c2443_fclk_div(unsigned long clkcon0)
+{
+ clkcon0 &= S3C2443_CLKDIV0_ARMDIV_MASK;
+
+ return armdiv[clkcon0 >> S3C2443_CLKDIV0_ARMDIV_SHIFT];
+}
+
+static inline unsigned long s3c2443_get_prediv(unsigned long clkcon0)
+{
+ clkcon0 &= S3C2443_CLKDIV0_PREDIV_MASK;
+ clkcon0 >>= S3C2443_CLKDIV0_PREDIV_SHIFT;
+
+ return clkcon0 + 1;
+}
+
+/* clocks to add straight away */
+
+static struct clk *clks[] __initdata = {
+ &clk_ext,
+ &clk_epll,
+ &clk_usb_bus_host,
+ &clk_usb_bus,
+ &clk_esysclk,
+ &clk_epllref,
+ &clk_mpllref,
+ &clk_msysclk,
+ &clk_uart,
+ &clk_display,
+ &clk_cam,
+ &clk_i2s_eplldiv,
+ &clk_i2s,
+ &clk_hsspi,
+ &clk_hsmmc_div,
+ &clk_hsmmc,
+};
+
+void __init s3c2443_init_clocks(int xtal)
+{
+ unsigned long epllcon = __raw_readl(S3C2443_EPLLCON);
+ unsigned long mpllcon = __raw_readl(S3C2443_MPLLCON);
+ unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0);
+ unsigned long pll;
+ unsigned long fclk;
+ unsigned long hclk;
+ unsigned long pclk;
+ struct clk *clkp;
+ int ret;
+ int ptr;
+
+ pll = s3c2443_get_mpll(mpllcon, xtal);
+
+ fclk = pll / s3c2443_fclk_div(clkdiv0);
+ hclk = fclk / s3c2443_get_prediv(clkdiv0);
+ hclk = hclk / ((clkdiv0 & S3C2443_CLKDIV0_HALF_HCLK) ? 2 : 1);
+ pclk = hclk / ((clkdiv0 & S3C2443_CLKDIV0_HALF_PCLK) ? 2 : 1);
+
+ s3c24xx_setup_clocks(xtal, fclk, hclk, pclk);
+
+ printk("S3C2443: mpll %s %ld.%03ld MHz, cpu %ld.%03ld MHz, mem %ld.%03ld MHz, pclk %ld.%03ld MHz\n",
+ (mpllcon & S3C2443_PLLCON_OFF) ? "off":"on",
+ print_mhz(pll), print_mhz(fclk),
+ print_mhz(hclk), print_mhz(pclk));
+
+ s3c2443_clk_initparents();
+
+ for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) {
+ clkp = clks[ptr];
+
+ ret = s3c24xx_register_clock(clkp);
+ if (ret < 0) {
+ printk(KERN_ERR "Failed to register clock %s (%d)\n",
+ clkp->name, ret);
+ }
+ }
+
+ clk_epll.rate = s3c2443_get_epll(epllcon, xtal);
+
+ clk_usb_bus.parent = &clk_usb_bus_host;
+
+ /* ensure usb bus clock is within correct rate of 48MHz */
+
+ if (clk_get_rate(&clk_usb_bus_host) != (48 * 1000 * 1000)) {
+ printk(KERN_INFO "Warning: USB host bus not at 48MHz\n");
+ clk_set_rate(&clk_usb_bus_host, 48*1000*1000);
+ }
+
+ printk("S3C2443: epll %s %ld.%03ld MHz, usb-bus %ld.%03ld MHz\n",
+ (epllcon & S3C2443_PLLCON_OFF) ? "off":"on",
+ print_mhz(clk_get_rate(&clk_epll)),
+ print_mhz(clk_get_rate(&clk_usb_bus)));
+
+ /* register clocks from clock array */
+
+ clkp = init_clocks;
+ for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) {
+ ret = s3c24xx_register_clock(clkp);
+ if (ret < 0) {
+ printk(KERN_ERR "Failed to register clock %s (%d)\n",
+ clkp->name, ret);
+ }
+ }
+
+ /* We must be careful disabling the clocks we are not intending to
+ * be using at boot time, as subsytems such as the LCD which do
+ * their own DMA requests to the bus can cause the system to lockup
+ * if they where in the middle of requesting bus access.
+ *
+ * Disabling the LCD clock if the LCD is active is very dangerous,
+ * and therefore the bootloader should be careful to not enable
+ * the LCD clock if it is not needed.
+ */
+
+ /* install (and disable) the clocks we do not need immediately */
+
+ clkp = init_clocks_disable;
+ for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
+
+ ret = s3c24xx_register_clock(clkp);
+ if (ret < 0) {
+ printk(KERN_ERR "Failed to register clock %s (%d)\n",
+ clkp->name, ret);
+ }
+
+ (clkp->enable)(clkp, 0);
+ }
+}
diff --git a/arch/arm/mach-s3c2443/dma.c b/arch/arm/mach-s3c2443/dma.c
new file mode 100644
index 0000000..f70e8cc
--- /dev/null
+++ b/arch/arm/mach-s3c2443/dma.c
@@ -0,0 +1,180 @@
+/* linux/arch/arm/mach-s3c2443/dma.c
+ *
+ * Copyright (c) 2007 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2443 DMA selection
+ *
+ * http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/sysdev.h>
+#include <linux/serial_core.h>
+
+#include <asm/dma.h>
+#include <asm/arch/dma.h>
+#include <asm/io.h>
+
+#include <asm/plat-s3c24xx/dma.h>
+#include <asm/plat-s3c24xx/cpu.h>
+
+#include <asm/arch/regs-serial.h>
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-ac97.h>
+#include <asm/arch/regs-mem.h>
+#include <asm/arch/regs-lcd.h>
+#include <asm/arch/regs-sdi.h>
+#include <asm/arch/regs-iis.h>
+#include <asm/arch/regs-spi.h>
+
+#define MAP(x) { \
+ [0] = (x) | DMA_CH_VALID, \
+ [1] = (x) | DMA_CH_VALID, \
+ [2] = (x) | DMA_CH_VALID, \
+ [3] = (x) | DMA_CH_VALID, \
+ [4] = (x) | DMA_CH_VALID, \
+ [5] = (x) | DMA_CH_VALID, \
+ }
+
+static struct s3c24xx_dma_map __initdata s3c2443_dma_mappings[] = {
+ [DMACH_XD0] = {
+ .name = "xdreq0",
+ .channels = MAP(S3C2443_DMAREQSEL_XDREQ0),
+ },
+ [DMACH_XD1] = {
+ .name = "xdreq1",
+ .channels = MAP(S3C2443_DMAREQSEL_XDREQ1),
+ },
+ [DMACH_SDI] = {
+ .name = "sdi",
+ .channels = MAP(S3C2443_DMAREQSEL_SDI),
+ .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO,
+ .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO,
+ },
+ [DMACH_SPI0] = {
+ .name = "spi0",
+ .channels = MAP(S3C2443_DMAREQSEL_SPI0TX),
+ .hw_addr.to = S3C2410_PA_SPI + S3C2410_SPTDAT,
+ .hw_addr.from = S3C2410_PA_SPI + S3C2410_SPRDAT,
+ },
+ [DMACH_SPI1] = {
+ .name = "spi1",
+ .channels = MAP(S3C2443_DMAREQSEL_SPI1TX),
+ .hw_addr.to = S3C2410_PA_SPI + 0x20 + S3C2410_SPTDAT,
+ .hw_addr.from = S3C2410_PA_SPI + 0x20 + S3C2410_SPRDAT,
+ },
+ [DMACH_UART0] = {
+ .name = "uart0",
+ .channels = MAP(S3C2443_DMAREQSEL_UART0_0),
+ .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH,
+ .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH,
+ },
+ [DMACH_UART1] = {
+ .name = "uart1",
+ .channels = MAP(S3C2443_DMAREQSEL_UART1_0),
+ .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH,
+ .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH,
+ },
+ [DMACH_UART2] = {
+ .name = "uart2",
+ .channels = MAP(S3C2443_DMAREQSEL_UART2_0),
+ .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH,
+ .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH,
+ },
+ [DMACH_UART3] = {
+ .name = "uart3",
+ .channels = MAP(S3C2443_DMAREQSEL_UART3_0),
+ .hw_addr.to = S3C2443_PA_UART3 + S3C2410_UTXH,
+ .hw_addr.from = S3C2443_PA_UART3 + S3C2410_URXH,
+ },
+ [DMACH_UART0_SRC2] = {
+ .name = "uart0",
+ .channels = MAP(S3C2443_DMAREQSEL_UART0_1),
+ .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH,
+ .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH,
+ },
+ [DMACH_UART1_SRC2] = {
+ .name = "uart1",
+ .channels = MAP(S3C2443_DMAREQSEL_UART1_1),
+ .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH,
+ .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH,
+ },
+ [DMACH_UART2_SRC2] = {
+ .name = "uart2",
+ .channels = MAP(S3C2443_DMAREQSEL_UART2_1),
+ .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH,
+ .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH,
+ },
+ [DMACH_UART3_SRC2] = {
+ .name = "uart3",
+ .channels = MAP(S3C2443_DMAREQSEL_UART3_1),
+ .hw_addr.to = S3C2443_PA_UART3 + S3C2410_UTXH,
+ .hw_addr.from = S3C2443_PA_UART3 + S3C2410_URXH,
+ },
+ [DMACH_TIMER] = {
+ .name = "timer",
+ .channels = MAP(S3C2443_DMAREQSEL_TIMER),
+ },
+ [DMACH_I2S_IN] = {
+ .name = "i2s-sdi",
+ .channels = MAP(S3C2443_DMAREQSEL_I2SRX),
+ .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO,
+ },
+ [DMACH_I2S_OUT] = {
+ .name = "i2s-sdo",
+ .channels = MAP(S3C2443_DMAREQSEL_I2STX),
+ .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO,
+ },
+ [DMACH_PCM_IN] = {
+ .name = "pcm-in",
+ .channels = MAP(S3C2443_DMAREQSEL_PCMIN),
+ .hw_addr.from = S3C2440_PA_AC97 + S3C_AC97_PCM_DATA,
+ },
+ [DMACH_PCM_OUT] = {
+ .name = "pcm-out",
+ .channels = MAP(S3C2443_DMAREQSEL_PCMOUT),
+ .hw_addr.to = S3C2440_PA_AC97 + S3C_AC97_PCM_DATA,
+ },
+ [DMACH_MIC_IN] = {
+ .name = "mic-in",
+ .channels = MAP(S3C2443_DMAREQSEL_MICIN),
+ .hw_addr.from = S3C2440_PA_AC97 + S3C_AC97_MIC_DATA,
+ },
+};
+
+static void s3c2443_dma_select(struct s3c2410_dma_chan *chan,
+ struct s3c24xx_dma_map *map)
+{
+ writel(map->channels[0] | S3C2443_DMAREQSEL_HW,
+ chan->regs + S3C2443_DMA_DMAREQSEL);
+}
+
+static struct s3c24xx_dma_selection __initdata s3c2443_dma_sel = {
+ .select = s3c2443_dma_select,
+ .dcon_mask = 0,
+ .map = s3c2443_dma_mappings,
+ .map_size = ARRAY_SIZE(s3c2443_dma_mappings),
+};
+
+static int s3c2443_dma_add(struct sys_device *sysdev)
+{
+ s3c24xx_dma_init(6, IRQ_S3C2443_DMA0, 0x100);
+ return s3c24xx_dma_init_map(&s3c2443_dma_sel);
+}
+
+static struct sysdev_driver s3c2443_dma_driver = {
+ .add = s3c2443_dma_add,
+};
+
+static int __init s3c2443_dma_init(void)
+{
+ return sysdev_driver_register(&s3c2443_sysclass, &s3c2443_dma_driver);
+}
+
+arch_initcall(s3c2443_dma_init);
diff --git a/arch/arm/mach-s3c2443/irq.c b/arch/arm/mach-s3c2443/irq.c
new file mode 100644
index 0000000..7a45b6d
--- /dev/null
+++ b/arch/arm/mach-s3c2443/irq.c
@@ -0,0 +1,290 @@
+/* linux/arch/arm/mach-s3c2443/irq.c
+ *
+ * Copyright (c) 2007 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/ptrace.h>
+#include <linux/sysdev.h>
+
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+
+#include <asm/mach/irq.h>
+
+#include <asm/arch/regs-irq.h>
+#include <asm/arch/regs-gpio.h>
+
+#include <asm/plat-s3c24xx/cpu.h>
+#include <asm/plat-s3c24xx/pm.h>
+#include <asm/plat-s3c24xx/irq.h>
+
+#define INTMSK(start, end) ((1 << ((end) + 1 - (start))) - 1)
+
+static inline void s3c2443_irq_demux(unsigned int irq, unsigned int len)
+{
+ unsigned int subsrc, submsk;
+ unsigned int end;
+ struct irq_desc *mydesc;
+
+ /* read the current pending interrupts, and the mask
+ * for what it is available */
+
+ subsrc = __raw_readl(S3C2410_SUBSRCPND);
+ submsk = __raw_readl(S3C2410_INTSUBMSK);
+
+ subsrc &= ~submsk;
+ subsrc >>= (irq - S3C2410_IRQSUB(0));
+ subsrc &= (1 << len)-1;
+
+ end = len + irq;
+ mydesc = irq_desc + irq;
+
+ for (; irq < end && subsrc; irq++) {
+ if (subsrc & 1)
+ desc_handle_irq(irq, mydesc);
+
+ mydesc++;
+ subsrc >>= 1;
+ }
+}
+
+/* WDT/AC97 sub interrupts */
+
+static void s3c2443_irq_demux_wdtac97(unsigned int irq, struct irq_desc *desc)
+{
+ s3c2443_irq_demux(IRQ_S3C2443_WDT, 4);
+}
+
+#define INTMSK_WDTAC97 (1UL << (IRQ_WDT - IRQ_EINT0))
+#define SUBMSK_WDTAC97 INTMSK(IRQ_S3C2443_WDT, IRQ_S3C2443_AC97)
+
+static void s3c2443_irq_wdtac97_mask(unsigned int irqno)
+{
+ s3c_irqsub_mask(irqno, INTMSK_WDTAC97, SUBMSK_WDTAC97);
+}
+
+static void s3c2443_irq_wdtac97_unmask(unsigned int irqno)
+{
+ s3c_irqsub_unmask(irqno, INTMSK_WDTAC97);
+}
+
+static void s3c2443_irq_wdtac97_ack(unsigned int irqno)
+{
+ s3c_irqsub_maskack(irqno, INTMSK_WDTAC97, SUBMSK_WDTAC97);
+}
+
+static struct irq_chip s3c2443_irq_wdtac97 = {
+ .mask = s3c2443_irq_wdtac97_mask,
+ .unmask = s3c2443_irq_wdtac97_unmask,
+ .ack = s3c2443_irq_wdtac97_ack,
+};
+
+
+/* LCD sub interrupts */
+
+static void s3c2443_irq_demux_lcd(unsigned int irq, struct irq_desc *desc)
+{
+ s3c2443_irq_demux(IRQ_S3C2443_LCD1, 4);
+}
+
+#define INTMSK_LCD (1UL << (IRQ_LCD - IRQ_EINT0))
+#define SUBMSK_LCD INTMSK(IRQ_S3C2443_LCD1, IRQ_S3C2443_LCD4)
+
+static void s3c2443_irq_lcd_mask(unsigned int irqno)
+{
+ s3c_irqsub_mask(irqno, INTMSK_LCD, SUBMSK_LCD);
+}
+
+static void s3c2443_irq_lcd_unmask(unsigned int irqno)
+{
+ s3c_irqsub_unmask(irqno, INTMSK_LCD);
+}
+
+static void s3c2443_irq_lcd_ack(unsigned int irqno)
+{
+ s3c_irqsub_maskack(irqno, INTMSK_LCD, SUBMSK_LCD);
+}
+
+static struct irq_chip s3c2443_irq_lcd = {
+ .mask = s3c2443_irq_lcd_mask,
+ .unmask = s3c2443_irq_lcd_unmask,
+ .ack = s3c2443_irq_lcd_ack,
+};
+
+
+/* DMA sub interrupts */
+
+static void s3c2443_irq_demux_dma(unsigned int irq, struct irq_desc *desc)
+{
+ s3c2443_irq_demux(IRQ_S3C2443_DMA1, 6);
+}
+
+#define INTMSK_DMA (1UL << (IRQ_S3C2443_DMA - IRQ_EINT0))
+#define SUBMSK_DMA INTMSK(IRQ_S3C2443_DMA0, IRQ_S3C2443_DMA5)
+
+
+static void s3c2443_irq_dma_mask(unsigned int irqno)
+{
+ s3c_irqsub_mask(irqno, INTMSK_DMA, SUBMSK_DMA);
+}
+
+static void s3c2443_irq_dma_unmask(unsigned int irqno)
+{
+ s3c_irqsub_unmask(irqno, INTMSK_DMA);
+}
+
+static void s3c2443_irq_dma_ack(unsigned int irqno)
+{
+ s3c_irqsub_maskack(irqno, INTMSK_DMA, SUBMSK_DMA);
+}
+
+static struct irq_chip s3c2443_irq_dma = {
+ .mask = s3c2443_irq_dma_mask,
+ .unmask = s3c2443_irq_dma_unmask,
+ .ack = s3c2443_irq_dma_ack,
+};
+
+
+/* UART3 sub interrupts */
+
+static void s3c2443_irq_demux_uart3(unsigned int irq, struct irq_desc *desc)
+{
+ s3c2443_irq_demux(IRQ_S3C2443_UART3, 3);
+}
+
+#define INTMSK_UART3 (1UL << (IRQ_S3C2443_UART3 - IRQ_EINT0))
+#define SUBMSK_UART3 (0xf << (IRQ_S3C2443_RX3 - S3C2410_IRQSUB(0)))
+
+
+static void s3c2443_irq_uart3_mask(unsigned int irqno)
+{
+ s3c_irqsub_mask(irqno, INTMSK_UART3, SUBMSK_UART3);
+}
+
+static void s3c2443_irq_uart3_unmask(unsigned int irqno)
+{
+ s3c_irqsub_unmask(irqno, INTMSK_UART3);
+}
+
+static void s3c2443_irq_uart3_ack(unsigned int irqno)
+{
+ s3c_irqsub_maskack(irqno, INTMSK_UART3, SUBMSK_UART3);
+}
+
+static struct irq_chip s3c2443_irq_uart3 = {
+ .mask = s3c2443_irq_uart3_mask,
+ .unmask = s3c2443_irq_uart3_unmask,
+ .ack = s3c2443_irq_uart3_ack,
+};
+
+
+/* CAM sub interrupts */
+
+static void s3c2443_irq_demux_cam(unsigned int irq, struct irq_desc *desc)
+{
+ s3c2443_irq_demux(IRQ_S3C2440_CAM_C, 4);
+}
+
+#define INTMSK_CAM (1UL << (IRQ_CAM - IRQ_EINT0))
+#define SUBMSK_CAM INTMSK(IRQ_S3C2440_CAM_C, IRQ_S3C2440_CAM_P)
+
+static void s3c2443_irq_cam_mask(unsigned int irqno)
+{
+ s3c_irqsub_mask(irqno, INTMSK_CAM, SUBMSK_CAM);
+}
+
+static void s3c2443_irq_cam_unmask(unsigned int irqno)
+{
+ s3c_irqsub_unmask(irqno, INTMSK_CAM);
+}
+
+static void s3c2443_irq_cam_ack(unsigned int irqno)
+{
+ s3c_irqsub_maskack(irqno, INTMSK_CAM, SUBMSK_CAM);
+}
+
+static struct irq_chip s3c2443_irq_cam = {
+ .mask = s3c2443_irq_cam_mask,
+ .unmask = s3c2443_irq_cam_unmask,
+ .ack = s3c2443_irq_cam_ack,
+};
+
+/* IRQ initialisation code */
+
+static int __init s3c2443_add_sub(unsigned int base,
+ void (*demux)(unsigned int,
+ struct irq_desc *),
+ struct irq_chip *chip,
+ unsigned int start, unsigned int end)
+{
+ unsigned int irqno;
+
+ set_irq_chip(base, &s3c_irq_level_chip);
+ set_irq_handler(base, handle_level_irq);
+ set_irq_chained_handler(base, demux);
+
+ for (irqno = start; irqno <= end; irqno++) {
+ set_irq_chip(irqno, chip);
+ set_irq_handler(irqno, handle_level_irq);
+ set_irq_flags(irqno, IRQF_VALID);
+ }
+
+ return 0;
+}
+
+static int s3c2443_irq_add(struct sys_device *sysdev)
+{
+ printk("S3C2443: IRQ Support\n");
+
+ s3c2443_add_sub(IRQ_CAM, s3c2443_irq_demux_cam, &s3c2443_irq_cam,
+ IRQ_S3C2440_CAM_C, IRQ_S3C2440_CAM_P);
+
+ s3c2443_add_sub(IRQ_LCD, s3c2443_irq_demux_lcd, &s3c2443_irq_lcd,
+ IRQ_S3C2443_LCD1, IRQ_S3C2443_LCD4);
+
+ s3c2443_add_sub(IRQ_S3C2443_DMA, s3c2443_irq_demux_dma,
+ &s3c2443_irq_dma, IRQ_S3C2443_DMA0, IRQ_S3C2443_DMA5);
+
+ s3c2443_add_sub(IRQ_S3C2443_UART3, s3c2443_irq_demux_uart3,
+ &s3c2443_irq_uart3,
+ IRQ_S3C2443_RX3, IRQ_S3C2443_ERR3);
+
+ s3c2443_add_sub(IRQ_WDT, s3c2443_irq_demux_wdtac97,
+ &s3c2443_irq_wdtac97,
+ IRQ_S3C2443_WDT, IRQ_S3C2443_AC97);
+
+ return 0;
+}
+
+static struct sysdev_driver s3c2443_irq_driver = {
+ .add = s3c2443_irq_add,
+};
+
+static int s3c2443_irq_init(void)
+{
+ return sysdev_driver_register(&s3c2443_sysclass, &s3c2443_irq_driver);
+}
+
+arch_initcall(s3c2443_irq_init);
+
diff --git a/arch/arm/mach-s3c2443/mach-smdk2443.c b/arch/arm/mach-s3c2443/mach-smdk2443.c
new file mode 100644
index 0000000..e82aaff
--- /dev/null
+++ b/arch/arm/mach-s3c2443/mach-smdk2443.c
@@ -0,0 +1,137 @@
+/* linux/arch/arm/mach-s3c2443/mach-smdk2443.c
+ *
+ * Copyright (c) 2007 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * http://www.fluff.org/ben/smdk2443/
+ *
+ * Thanks to Samsung for the loan of an SMDK2443
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <asm/arch/regs-serial.h>
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-lcd.h>
+
+#include <asm/arch/idle.h>
+#include <asm/arch/fb.h>
+
+#include <asm/plat-s3c24xx/s3c2410.h>
+#include <asm/plat-s3c24xx/s3c2440.h>
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
+
+#include <asm/plat-s3c24xx/common-smdk.h>
+
+static struct map_desc smdk2443_iodesc[] __initdata = {
+ /* ISA IO Space map (memory space selected by A24) */
+
+ {
+ .virtual = (u32)S3C24XX_VA_ISA_WORD,
+ .pfn = __phys_to_pfn(S3C2410_CS2),
+ .length = 0x10000,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (u32)S3C24XX_VA_ISA_WORD + 0x10000,
+ .pfn = __phys_to_pfn(S3C2410_CS2 + (1<<24)),
+ .length = SZ_4M,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (u32)S3C24XX_VA_ISA_BYTE,
+ .pfn = __phys_to_pfn(S3C2410_CS2),
+ .length = 0x10000,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (u32)S3C24XX_VA_ISA_BYTE + 0x10000,
+ .pfn = __phys_to_pfn(S3C2410_CS2 + (1<<24)),
+ .length = SZ_4M,
+ .type = MT_DEVICE,
+ }
+};
+
+#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg smdk2443_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x03,
+ .ufcon = 0x51,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x03,
+ .ufcon = 0x51,
+ },
+ /* IR port */
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x43,
+ .ufcon = 0x51,
+ }
+};
+
+static struct platform_device *smdk2443_devices[] __initdata = {
+ &s3c_device_wdt,
+ &s3c_device_i2c,
+};
+
+static struct s3c24xx_board smdk2443_board __initdata = {
+ .devices = smdk2443_devices,
+ .devices_count = ARRAY_SIZE(smdk2443_devices)
+};
+
+static void __init smdk2443_map_io(void)
+{
+ s3c24xx_init_io(smdk2443_iodesc, ARRAY_SIZE(smdk2443_iodesc));
+ s3c24xx_init_clocks(12000000);
+ s3c24xx_init_uarts(smdk2443_uartcfgs, ARRAY_SIZE(smdk2443_uartcfgs));
+ s3c24xx_set_board(&smdk2443_board);
+}
+
+static void __init smdk2443_machine_init(void)
+{
+ smdk_machine_init();
+}
+
+MACHINE_START(SMDK2443, "SMDK2443")
+ /* Maintainer: Ben Dooks <ben@fluff.org> */
+ .phys_io = S3C2410_PA_UART,
+ .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
+ .boot_params = S3C2410_SDRAM_PA + 0x100,
+
+ .init_irq = s3c24xx_init_irq,
+ .map_io = smdk2443_map_io,
+ .init_machine = smdk2443_machine_init,
+ .timer = &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s3c2443/s3c2443.c b/arch/arm/mach-s3c2443/s3c2443.c
new file mode 100644
index 0000000..11b1d0b
--- /dev/null
+++ b/arch/arm/mach-s3c2443/s3c2443.c
@@ -0,0 +1,97 @@
+/* linux/arch/arm/mach-s3c2443/s3c2443.c
+ *
+ * Copyright (c) 2007 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Samsung S3C2443 Mobile CPU support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/serial_core.h>
+#include <linux/sysdev.h>
+#include <linux/clk.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+
+#include <asm/arch/regs-s3c2443-clock.h>
+#include <asm/arch/reset.h>
+
+#include <asm/plat-s3c24xx/s3c2443.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
+
+static struct map_desc s3c2443_iodesc[] __initdata = {
+ IODESC_ENT(WATCHDOG),
+ IODESC_ENT(CLKPWR),
+ IODESC_ENT(TIMER),
+};
+
+struct sysdev_class s3c2443_sysclass = {
+ set_kset_name("s3c2443-core"),
+};
+
+static struct sys_device s3c2443_sysdev = {
+ .cls = &s3c2443_sysclass,
+};
+
+static void s3c2443_hard_reset(void)
+{
+ __raw_writel(S3C2443_SWRST_RESET, S3C2443_SWRST);
+}
+
+int __init s3c2443_init(void)
+{
+ printk("S3C2443: Initialising architecture\n");
+
+ s3c24xx_reset_hook = s3c2443_hard_reset;
+
+ s3c_device_nand.name = "s3c2412-nand";
+
+ return sysdev_register(&s3c2443_sysdev);
+}
+
+void __init s3c2443_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+ s3c24xx_init_uartdevs("s3c2440-uart", s3c2410_uart_resources, cfg, no);
+}
+
+/* s3c2443_map_io
+ *
+ * register the standard cpu IO areas, and any passed in from the
+ * machine specific initialisation.
+ */
+
+void __init s3c2443_map_io(struct map_desc *mach_desc, int mach_size)
+{
+ iotable_init(s3c2443_iodesc, ARRAY_SIZE(s3c2443_iodesc));
+ iotable_init(mach_desc, mach_size);
+}
+
+/* need to register class before we actually register the device, and
+ * we also need to ensure that it has been initialised before any of the
+ * drivers even try to use it (even if not on an s3c2443 based system)
+ * as a driver which may support both 2443 and 2440 may try and use it.
+*/
+
+static int __init s3c2443_core_init(void)
+{
+ return sysdev_class_register(&s3c2443_sysclass);
+}
+
+core_initcall(s3c2443_core_init);
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index aade2f7..4b27719 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -171,8 +171,8 @@
# ARM926T
config CPU_ARM926T
bool "Support ARM926T processor"
- depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || MACH_REALVIEW_EB || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261
- default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261
+ depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || MACH_REALVIEW_EB || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_NS9XXX
+ default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_NS9XXX
select CPU_32v5
select CPU_ABRT_EV5TJ
select CPU_CACHE_VIVT
@@ -609,3 +609,10 @@
Forget about fast user space cmpxchg support.
It is just not possible.
+config OUTER_CACHE
+ bool
+ default n
+
+config CACHE_L2X0
+ bool
+ select OUTER_CACHE
diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile
index d2f5672..2f8b959 100644
--- a/arch/arm/mm/Makefile
+++ b/arch/arm/mm/Makefile
@@ -66,3 +66,5 @@
obj-$(CONFIG_CPU_XSCALE) += proc-xscale.o
obj-$(CONFIG_CPU_XSC3) += proc-xsc3.o
obj-$(CONFIG_CPU_V6) += proc-v6.o
+
+obj-$(CONFIG_CACHE_L2X0) += cache-l2x0.o
diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c
new file mode 100644
index 0000000..08a36f1
--- /dev/null
+++ b/arch/arm/mm/cache-l2x0.c
@@ -0,0 +1,104 @@
+/*
+ * arch/arm/mm/cache-l2x0.c - L210/L220 cache controller support
+ *
+ * Copyright (C) 2007 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#include <linux/init.h>
+
+#include <asm/cacheflush.h>
+#include <asm/io.h>
+#include <asm/hardware/cache-l2x0.h>
+
+#define CACHE_LINE_SIZE 32
+
+static void __iomem *l2x0_base;
+
+static inline void sync_writel(unsigned long val, unsigned long reg,
+ unsigned long complete_mask)
+{
+ writel(val, l2x0_base + reg);
+ /* wait for the operation to complete */
+ while (readl(l2x0_base + reg) & complete_mask)
+ ;
+}
+
+static inline void cache_sync(void)
+{
+ sync_writel(0, L2X0_CACHE_SYNC, 1);
+}
+
+static inline void l2x0_inv_all(void)
+{
+ /* invalidate all ways */
+ sync_writel(0xff, L2X0_INV_WAY, 0xff);
+ cache_sync();
+}
+
+static void l2x0_inv_range(unsigned long start, unsigned long end)
+{
+ unsigned long addr;
+
+ start &= ~(CACHE_LINE_SIZE - 1);
+ for (addr = start; addr < end; addr += CACHE_LINE_SIZE)
+ sync_writel(addr, L2X0_INV_LINE_PA, 1);
+ cache_sync();
+}
+
+static void l2x0_clean_range(unsigned long start, unsigned long end)
+{
+ unsigned long addr;
+
+ start &= ~(CACHE_LINE_SIZE - 1);
+ for (addr = start; addr < end; addr += CACHE_LINE_SIZE)
+ sync_writel(addr, L2X0_CLEAN_LINE_PA, 1);
+ cache_sync();
+}
+
+static void l2x0_flush_range(unsigned long start, unsigned long end)
+{
+ unsigned long addr;
+
+ start &= ~(CACHE_LINE_SIZE - 1);
+ for (addr = start; addr < end; addr += CACHE_LINE_SIZE)
+ sync_writel(addr, L2X0_CLEAN_INV_LINE_PA, 1);
+ cache_sync();
+}
+
+void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask)
+{
+ __u32 aux;
+
+ l2x0_base = base;
+
+ /* disable L2X0 */
+ writel(0, l2x0_base + L2X0_CTRL);
+
+ aux = readl(l2x0_base + L2X0_AUX_CTRL);
+ aux &= aux_mask;
+ aux |= aux_val;
+ writel(aux, l2x0_base + L2X0_AUX_CTRL);
+
+ l2x0_inv_all();
+
+ /* enable L2X0 */
+ writel(1, l2x0_base + L2X0_CTRL);
+
+ outer_cache.inv_range = l2x0_inv_range;
+ outer_cache.clean_range = l2x0_clean_range;
+ outer_cache.flush_range = l2x0_flush_range;
+
+ printk(KERN_INFO "L2X0 cache controller enabled\n");
+}
diff --git a/arch/arm/mm/consistent.c b/arch/arm/mm/consistent.c
index 6a9c362..1f9f94f 100644
--- a/arch/arm/mm/consistent.c
+++ b/arch/arm/mm/consistent.c
@@ -205,9 +205,10 @@
* kernel direct-mapped region for device DMA.
*/
{
- unsigned long kaddr = (unsigned long)page_address(page);
- memset(page_address(page), 0, size);
- dmac_flush_range(kaddr, kaddr + size);
+ void *ptr = page_address(page);
+ memset(ptr, 0, size);
+ dmac_flush_range(ptr, ptr + size);
+ outer_flush_range(__pa(ptr), __pa(ptr) + size);
}
/*
@@ -480,20 +481,24 @@
* platforms with CONFIG_DMABOUNCE.
* Use the driver DMA support - see dma-mapping.h (dma_sync_*)
*/
-void consistent_sync(void *vaddr, size_t size, int direction)
+void consistent_sync(const void *start, size_t size, int direction)
{
- unsigned long start = (unsigned long)vaddr;
- unsigned long end = start + size;
+ const void *end = start + size;
+
+ BUG_ON(!virt_addr_valid(start) || !virt_addr_valid(end - 1));
switch (direction) {
case DMA_FROM_DEVICE: /* invalidate only */
dmac_inv_range(start, end);
+ outer_inv_range(__pa(start), __pa(end));
break;
case DMA_TO_DEVICE: /* writeback only */
dmac_clean_range(start, end);
+ outer_clean_range(__pa(start), __pa(end));
break;
case DMA_BIDIRECTIONAL: /* writeback and invalidate */
dmac_flush_range(start, end);
+ outer_flush_range(__pa(start), __pa(end));
break;
default:
BUG();
diff --git a/arch/arm/mm/context.c b/arch/arm/mm/context.c
index 79e8002..9da43a0 100644
--- a/arch/arm/mm/context.c
+++ b/arch/arm/mm/context.c
@@ -19,7 +19,8 @@
/*
* We fork()ed a process, and we need a new context for the child
* to run in. We reserve version 0 for initial tasks so we will
- * always allocate an ASID.
+ * always allocate an ASID. The ASID 0 is reserved for the TTBR
+ * register changing sequence.
*/
void __init_new_context(struct task_struct *tsk, struct mm_struct *mm)
{
@@ -38,8 +39,15 @@
* If we've used up all our ASIDs, we need
* to start a new version and flush the TLB.
*/
- if ((asid & ~ASID_MASK) == 0)
+ if ((asid & ~ASID_MASK) == 0) {
+ asid = ++cpu_last_asid;
+ /* set the reserved ASID before flushing the TLB */
+ asm("mcr p15, 0, %0, c13, c0, 1 @ set reserved context ID\n"
+ :
+ : "r" (0));
+ isb();
flush_tlb_all();
+ }
mm->context.id = asid;
}
diff --git a/arch/arm/mm/fault-armv.c b/arch/arm/mm/fault-armv.c
index cf95c5d..44558d5 100644
--- a/arch/arm/mm/fault-armv.c
+++ b/arch/arm/mm/fault-armv.c
@@ -119,8 +119,6 @@
flush_cache_page(vma, addr, pfn);
}
-void __flush_dcache_page(struct address_space *mapping, struct page *page);
-
/*
* Take care of architecture specific things when placing a new PTE into
* a page table, or changing an existing PTE. Basically, there are two
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index 655c837..94fd4bf 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -49,8 +49,10 @@
static unsigned int cachepolicy __initdata = CPOLICY_WRITEBACK;
static unsigned int ecc_mask __initdata = 0;
+pgprot_t pgprot_user;
pgprot_t pgprot_kernel;
+EXPORT_SYMBOL(pgprot_user);
EXPORT_SYMBOL(pgprot_kernel);
struct cachepolicy {
@@ -345,6 +347,7 @@
mem_types[MT_MINICLEAN].prot_sect &= ~PMD_SECT_TEX(1);
}
+ pgprot_user = __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | user_pgprot);
pgprot_kernel = __pgprot(L_PTE_PRESENT | L_PTE_YOUNG |
L_PTE_DIRTY | L_PTE_WRITE |
L_PTE_EXEC | kern_pgprot);
diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S
index 7b1843b..eb42e5b 100644
--- a/arch/arm/mm/proc-v6.S
+++ b/arch/arm/mm/proc-v6.S
@@ -14,10 +14,13 @@
#include <asm/assembler.h>
#include <asm/asm-offsets.h>
#include <asm/elf.h>
-#include <asm/hardware/arm_scu.h>
#include <asm/pgtable-hwdef.h>
#include <asm/pgtable.h>
+#ifdef CONFIG_SMP
+#include <asm/hardware/arm_scu.h>
+#endif
+
#include "proc-macros.S"
#define D_CACHE_LINE_SIZE 32
@@ -30,6 +33,12 @@
#define TTB_RGN_WT (2 << 3)
#define TTB_RGN_WB (3 << 3)
+#ifndef CONFIG_SMP
+#define TTB_FLAGS TTB_RGN_WBWA
+#else
+#define TTB_FLAGS TTB_RGN_WBWA|TTB_S
+#endif
+
ENTRY(cpu_v6_proc_init)
mov pc, lr
@@ -92,9 +101,7 @@
#ifdef CONFIG_MMU
mov r2, #0
ldr r1, [r1, #MM_CONTEXT_ID] @ get mm->context.id
-#ifdef CONFIG_SMP
- orr r0, r0, #TTB_RGN_WBWA|TTB_S @ mark PTWs shared, outer cacheable
-#endif
+ orr r0, r0, #TTB_FLAGS
mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB
mcr p15, 0, r2, c7, c10, 4 @ drain write buffer
mcr p15, 0, r0, c2, c0, 0 @ set TTB 0
@@ -183,8 +190,7 @@
/* Set up the SCU on core 0 only */
mrc p15, 0, r0, c0, c0, 5 @ CPU core number
ands r0, r0, #15
- moveq r0, #0x10000000 @ SCU_BASE
- orreq r0, r0, #0x00100000
+ ldreq r0, =SCU_BASE
ldreq r5, [r0, #SCU_CTRL]
orreq r5, r5, #1
streq r5, [r0, #SCU_CTRL]
@@ -204,9 +210,7 @@
#ifdef CONFIG_MMU
mcr p15, 0, r0, c8, c7, 0 @ invalidate I + D TLBs
mcr p15, 0, r0, c2, c0, 2 @ TTB control register
-#ifdef CONFIG_SMP
- orr r4, r4, #TTB_RGN_WBWA|TTB_S @ mark PTWs shared, outer cacheable
-#endif
+ orr r4, r4, #TTB_FLAGS
mcr p15, 0, r4, c2, c0, 1 @ load TTB1
#endif /* CONFIG_MMU */
adr r5, v6_crval
diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S
index 94a5845..d95921a 100644
--- a/arch/arm/mm/proc-xsc3.S
+++ b/arch/arm/mm/proc-xsc3.S
@@ -5,23 +5,23 @@
* Current Maintainer: Lennert Buytenhek <buytenh@wantstofly.org>
*
* Copyright 2004 (C) Intel Corp.
- * Copyright 2005 (c) MontaVista Software, Inc.
+ * Copyright 2005 (C) MontaVista Software, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
- * MMU functions for the Intel XScale3 Core (XSC3). The XSC3 core is an
- * extension to Intel's original XScale core that adds the following
+ * MMU functions for the Intel XScale3 Core (XSC3). The XSC3 core is
+ * an extension to Intel's original XScale core that adds the following
* features:
*
* - ARMv6 Supersections
* - Low Locality Reference pages (replaces mini-cache)
* - 36-bit addressing
* - L2 cache
- * - Cache-coherency if chipset supports it
+ * - Cache coherency if chipset supports it
*
- * Based on orignal XScale code by Nicolas Pitre
+ * Based on original XScale code by Nicolas Pitre.
*/
#include <linux/linkage.h>
@@ -42,12 +42,12 @@
#define MAX_AREA_SIZE 32768
/*
- * The cache line size of the I and D cache.
+ * The cache line size of the L1 I, L1 D and unified L2 cache.
*/
#define CACHELINESIZE 32
/*
- * The size of the data cache.
+ * The size of the L1 D cache.
*/
#define CACHESIZE 32768
@@ -57,9 +57,9 @@
#define L2_CACHE_ENABLE 1
/*
- * This macro is used to wait for a CP15 write and is needed
- * when we have to ensure that the last operation to the co-pro
- * was completed before continuing with operation.
+ * This macro is used to wait for a CP15 write and is needed when we
+ * have to ensure that the last operation to the coprocessor was
+ * completed before continuing with operation.
*/
.macro cpwait_ret, lr, rd
mrc p15, 0, \rd, c2, c0, 0 @ arbitrary read of cp15
@@ -68,13 +68,13 @@
.endm
/*
- * This macro cleans & invalidates the entire xsc3 dcache by set & way.
+ * This macro cleans and invalidates the entire L1 D cache.
*/
.macro clean_d_cache rd, rs
mov \rd, #0x1f00
orr \rd, \rd, #0x00e0
-1: mcr p15, 0, \rd, c7, c14, 2 @ clean/inv set/way
+1: mcr p15, 0, \rd, c7, c14, 2 @ clean/invalidate L1 D line
adds \rd, \rd, #0x40000000
bcc 1b
subs \rd, \rd, #0x20
@@ -119,15 +119,15 @@
mov r1, #PSR_F_BIT|PSR_I_BIT|SVC_MODE
msr cpsr_c, r1 @ reset CPSR
mrc p15, 0, r1, c1, c0, 0 @ ctrl register
- bic r1, r1, #0x0086 @ ........B....CA.
bic r1, r1, #0x3900 @ ..VIZ..S........
+ bic r1, r1, #0x0086 @ ........B....CA.
mcr p15, 0, r1, c1, c0, 0 @ ctrl register
- mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches & BTB
+ mcr p15, 0, ip, c7, c7, 0 @ invalidate L1 caches and BTB
bic r1, r1, #0x0001 @ ...............M
mcr p15, 0, r1, c1, c0, 0 @ ctrl register
@ CAUTION: MMU turned off from this point. We count on the pipeline
@ already containing those two last instructions to survive.
- mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
+ mcr p15, 0, ip, c8, c7, 0 @ invalidate I and D TLBs
mov pc, r0
/*
@@ -139,14 +139,12 @@
*
* XScale supports clock switching, but using idle mode support
* allows external hardware to react to system state changes.
-
- MMG: Come back to this one.
*/
.align 5
ENTRY(cpu_xsc3_do_idle)
mov r0, #1
- mcr p14, 0, r0, c7, c0, 0 @ Go to IDLE
+ mcr p14, 0, r0, c7, c0, 0 @ go to idle
mov pc, lr
/* ================================= CACHE ================================ */
@@ -171,9 +169,9 @@
__flush_whole_cache:
clean_d_cache r0, r1
tst r2, #VM_EXEC
- mcrne p15, 0, ip, c7, c5, 0 @ Invalidate I cache & BTB
- mcrne p15, 0, ip, c7, c10, 4 @ Drain Write Buffer
- mcrne p15, 0, ip, c7, c5, 4 @ Prefetch Flush
+ mcrne p15, 0, ip, c7, c5, 0 @ invalidate L1 I cache and BTB
+ mcrne p15, 0, ip, c7, c10, 4 @ data write barrier
+ mcrne p15, 0, ip, c7, c5, 4 @ prefetch flush
mov pc, lr
/*
@@ -194,21 +192,21 @@
bhs __flush_whole_cache
1: tst r2, #VM_EXEC
- mcrne p15, 0, r0, c7, c5, 1 @ Invalidate I cache line
- mcr p15, 0, r0, c7, c14, 1 @ Clean/invalidate D cache line
+ mcrne p15, 0, r0, c7, c5, 1 @ invalidate L1 I line
+ mcr p15, 0, r0, c7, c14, 1 @ clean/invalidate L1 D line
add r0, r0, #CACHELINESIZE
cmp r0, r1
blo 1b
tst r2, #VM_EXEC
- mcrne p15, 0, ip, c7, c5, 6 @ Invalidate BTB
- mcrne p15, 0, ip, c7, c10, 4 @ Drain Write Buffer
- mcrne p15, 0, ip, c7, c5, 4 @ Prefetch Flush
+ mcrne p15, 0, ip, c7, c5, 6 @ invalidate BTB
+ mcrne p15, 0, ip, c7, c10, 4 @ data write barrier
+ mcrne p15, 0, ip, c7, c5, 4 @ prefetch flush
mov pc, lr
/*
* coherent_kern_range(start, end)
*
- * Ensure coherency between the Icache and the Dcache in the
+ * Ensure coherency between the I cache and the D cache in the
* region described by start. If you have non-snooping
* Harvard caches, you need to implement this function.
*
@@ -222,34 +220,34 @@
/* FALLTHROUGH */
ENTRY(xsc3_coherent_user_range)
bic r0, r0, #CACHELINESIZE - 1
-1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+1: mcr p15, 0, r0, c7, c10, 1 @ clean L1 D line
add r0, r0, #CACHELINESIZE
cmp r0, r1
blo 1b
mov r0, #0
- mcr p15, 0, r0, c7, c5, 0 @ Invalidate I cache & BTB
- mcr p15, 0, r0, c7, c10, 4 @ Drain Write Buffer
- mcr p15, 0, r0, c7, c5, 4 @ Prefetch Flush
+ mcr p15, 0, r0, c7, c5, 0 @ invalidate L1 I cache and BTB
+ mcr p15, 0, r0, c7, c10, 4 @ data write barrier
+ mcr p15, 0, r0, c7, c5, 4 @ prefetch flush
mov pc, lr
/*
* flush_kern_dcache_page(void *page)
*
* Ensure no D cache aliasing occurs, either with itself or
- * the I cache
+ * the I cache.
*
* - addr - page aligned address
*/
ENTRY(xsc3_flush_kern_dcache_page)
add r1, r0, #PAGE_SZ
-1: mcr p15, 0, r0, c7, c14, 1 @ Clean/Invalidate D Cache line
+1: mcr p15, 0, r0, c7, c14, 1 @ clean/invalidate L1 D line
add r0, r0, #CACHELINESIZE
cmp r0, r1
blo 1b
mov r0, #0
- mcr p15, 0, r0, c7, c5, 0 @ Invalidate I cache & BTB
- mcr p15, 0, r0, c7, c10, 4 @ Drain Write Buffer
- mcr p15, 0, r0, c7, c5, 4 @ Prefetch Flush
+ mcr p15, 0, r0, c7, c5, 0 @ invalidate L1 I cache and BTB
+ mcr p15, 0, r0, c7, c10, 4 @ data write barrier
+ mcr p15, 0, r0, c7, c5, 4 @ prefetch flush
mov pc, lr
/*
@@ -266,17 +264,17 @@
ENTRY(xsc3_dma_inv_range)
tst r0, #CACHELINESIZE - 1
bic r0, r0, #CACHELINESIZE - 1
- mcrne p15, 0, r0, c7, c10, 1 @ clean L1 D entry
- mcrne p15, 1, r0, c7, c11, 1 @ clean L2 D entry
+ mcrne p15, 0, r0, c7, c10, 1 @ clean L1 D line
+ mcrne p15, 1, r0, c7, c11, 1 @ clean L2 line
tst r1, #CACHELINESIZE - 1
- mcrne p15, 0, r1, c7, c10, 1 @ clean L1 D entry
- mcrne p15, 1, r1, c7, c11, 1 @ clean L2 D entry
-1: mcr p15, 0, r0, c7, c6, 1 @ invalidate L1 D entry
- mcr p15, 1, r0, c7, c7, 1 @ Invalidate L2 D cache line
+ mcrne p15, 0, r1, c7, c10, 1 @ clean L1 D line
+ mcrne p15, 1, r1, c7, c11, 1 @ clean L2 line
+1: mcr p15, 0, r0, c7, c6, 1 @ invalidate L1 D line
+ mcr p15, 1, r0, c7, c7, 1 @ invalidate L2 line
add r0, r0, #CACHELINESIZE
cmp r0, r1
blo 1b
- mcr p15, 0, r0, c7, c10, 4 @ Drain Write Buffer
+ mcr p15, 0, r0, c7, c10, 4 @ data write barrier
mov pc, lr
/*
@@ -289,12 +287,12 @@
*/
ENTRY(xsc3_dma_clean_range)
bic r0, r0, #CACHELINESIZE - 1
-1: mcr p15, 0, r0, c7, c10, 1 @ clean L1 D entry
- mcr p15, 1, r0, c7, c11, 1 @ clean L2 D entry
+1: mcr p15, 0, r0, c7, c10, 1 @ clean L1 D line
+ mcr p15, 1, r0, c7, c11, 1 @ clean L2 line
add r0, r0, #CACHELINESIZE
cmp r0, r1
blo 1b
- mcr p15, 0, r0, c7, c10, 4 @ Drain Write Buffer
+ mcr p15, 0, r0, c7, c10, 4 @ data write barrier
mov pc, lr
/*
@@ -307,13 +305,13 @@
*/
ENTRY(xsc3_dma_flush_range)
bic r0, r0, #CACHELINESIZE - 1
-1: mcr p15, 0, r0, c7, c14, 1 @ Clean/invalidate L1 D cache line
- mcr p15, 1, r0, c7, c11, 1 @ Clean L2 D cache line
- mcr p15, 1, r0, c7, c7, 1 @ Invalidate L2 D cache line
+1: mcr p15, 0, r0, c7, c14, 1 @ clean/invalidate L1 D line
+ mcr p15, 1, r0, c7, c11, 1 @ clean L2 line
+ mcr p15, 1, r0, c7, c7, 1 @ invalidate L2 line
add r0, r0, #CACHELINESIZE
cmp r0, r1
blo 1b
- mcr p15, 0, r0, c7, c10, 4 @ Drain Write Buffer
+ mcr p15, 0, r0, c7, c10, 4 @ data write barrier
mov pc, lr
ENTRY(xsc3_cache_fns)
@@ -328,7 +326,7 @@
.long xsc3_dma_flush_range
ENTRY(cpu_xsc3_dcache_clean_area)
-1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+1: mcr p15, 0, r0, c7, c10, 1 @ clean L1 D line
add r0, r0, #CACHELINESIZE
subs r1, r1, #CACHELINESIZE
bhi 1b
@@ -346,14 +344,14 @@
.align 5
ENTRY(cpu_xsc3_switch_mm)
clean_d_cache r1, r2
- mcr p15, 0, ip, c7, c5, 0 @ Invalidate I cache & BTB
- mcr p15, 0, ip, c7, c10, 4 @ Drain Write Buffer
- mcr p15, 0, ip, c7, c5, 4 @ Prefetch Flush
+ mcr p15, 0, ip, c7, c5, 0 @ invalidate L1 I cache and BTB
+ mcr p15, 0, ip, c7, c10, 4 @ data write barrier
+ mcr p15, 0, ip, c7, c5, 4 @ prefetch flush
#ifdef L2_CACHE_ENABLE
orr r0, r0, #0x18 @ cache the page table in L2
#endif
mcr p15, 0, r0, c2, c0, 0 @ load page table pointer
- mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
+ mcr p15, 0, ip, c8, c7, 0 @ invalidate I and D TLBs
cpwait_ret lr, ip
/*
@@ -366,34 +364,34 @@
ENTRY(cpu_xsc3_set_pte_ext)
str r1, [r0], #-2048 @ linux version
- bic r2, r1, #0xff0 @ Keep C, B bits
+ bic r2, r1, #0xff0 @ keep C, B bits
orr r2, r2, #PTE_TYPE_EXT @ extended page
- tst r1, #L_PTE_SHARED @ Shared?
+ tst r1, #L_PTE_SHARED @ shared?
orrne r2, r2, #0x200
eor r3, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
- tst r3, #L_PTE_USER @ User?
+ tst r3, #L_PTE_USER @ user?
orrne r2, r2, #PTE_EXT_AP_URO_SRW @ yes -> user r/o, system r/w
- tst r3, #L_PTE_WRITE | L_PTE_DIRTY @ Write and Dirty?
+ tst r3, #L_PTE_WRITE | L_PTE_DIRTY @ write and dirty?
orreq r2, r2, #PTE_EXT_AP_UNO_SRW @ yes -> user n/a, system r/w
@ combined with user -> user r/w
#if L2_CACHE_ENABLE
- @ If its cacheable it needs to be in L2 also.
+ @ If it's cacheable, it needs to be in L2 also.
eor ip, r1, #L_PTE_CACHEABLE
tst ip, #L_PTE_CACHEABLE
orreq r2, r2, #PTE_EXT_TEX(0x5)
#endif
- tst r3, #L_PTE_PRESENT | L_PTE_YOUNG @ Present and Young?
+ tst r3, #L_PTE_PRESENT | L_PTE_YOUNG @ present and young?
movne r2, #0 @ no -> fault
str r2, [r0] @ hardware version
mov ip, #0
- mcr p15, 0, r0, c7, c10, 1 @ Clean D cache line mcr
- mcr p15, 0, ip, c7, c10, 4 @ Drain Write Buffer
+ mcr p15, 0, r0, c7, c10, 1 @ clean L1 D line
+ mcr p15, 0, ip, c7, c10, 4 @ data write barrier
mov pc, lr
.ltorg
@@ -406,17 +404,18 @@
__xsc3_setup:
mov r0, #PSR_F_BIT|PSR_I_BIT|SVC_MODE
msr cpsr_c, r0
- mcr p15, 0, ip, c7, c7, 0 @ invalidate I, D caches & BTB
- mcr p15, 0, ip, c7, c10, 4 @ Drain Write Buffer
- mcr p15, 0, ip, c7, c5, 4 @ Prefetch Flush
- mcr p15, 0, ip, c8, c7, 0 @ invalidate I, D TLBs
+ mcr p15, 0, ip, c7, c7, 0 @ invalidate L1 caches and BTB
+ mcr p15, 0, ip, c7, c10, 4 @ data write barrier
+ mcr p15, 0, ip, c7, c5, 4 @ prefetch flush
+ mcr p15, 0, ip, c8, c7, 0 @ invalidate I and D TLBs
#if L2_CACHE_ENABLE
orr r4, r4, #0x18 @ cache the page table in L2
#endif
mcr p15, 0, r4, c2, c0, 0 @ load page table pointer
- mov r0, #1 @ Allow access to CP0 and CP13
- orr r0, r0, #1 << 13 @ Its undefined whether this
- mcr p15, 0, r0, c15, c1, 0 @ affects USR or SVC modes
+
+ mov r0, #0 @ don't allow CP access
+ mcr p15, 0, r0, c15, c1, 0 @ write CP access register
+
mrc p15, 0, r0, c1, c0, 1 @ get auxiliary control reg
and r0, r0, #2 @ preserve bit P bit setting
#if L2_CACHE_ENABLE
@@ -427,9 +426,9 @@
adr r5, xsc3_crval
ldmia r5, {r5, r6}
mrc p15, 0, r0, c1, c0, 0 @ get control register
- bic r0, r0, r5 @ .... .... .... ..A.
- orr r0, r0, r6 @ .... .... .... .C.M
- orr r0, r0, #0x00000800 @ ..VI Z..S .... ....
+ bic r0, r0, r5 @ ..V. ..R. .... ..A.
+ orr r0, r0, r6 @ ..VI Z..S .... .C.M (mmu)
+ @ ...I Z..S .... .... (uc)
#if L2_CACHE_ENABLE
orr r0, r0, #0x04000000 @ L2 enable
#endif
@@ -439,7 +438,7 @@
.type xsc3_crval, #object
xsc3_crval:
- crval clear=0x04003b02, mmuset=0x00003105, ucset=0x00001100
+ crval clear=0x04002202, mmuset=0x00003905, ucset=0x00001900
__INITDATA
@@ -474,7 +473,7 @@
.type cpu_xsc3_name, #object
cpu_xsc3_name:
- .asciz "XScale-Core3"
+ .asciz "XScale-V3 based processor"
.size cpu_xsc3_name, . - cpu_xsc3_name
.align
@@ -490,7 +489,7 @@
PMD_SECT_CACHEABLE | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
- .long PMD_TYPE_SECT | \
+ .long PMD_TYPE_SECT | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
b __xsc3_setup
diff --git a/arch/arm/mm/tlb-v6.S b/arch/arm/mm/tlb-v6.S
index fd6adde..20f84bb 100644
--- a/arch/arm/mm/tlb-v6.S
+++ b/arch/arm/mm/tlb-v6.S
@@ -53,6 +53,8 @@
add r0, r0, #PAGE_SZ
cmp r0, r1
blo 1b
+ mcr p15, 0, ip, c7, c5, 6 @ flush BTAC/BTB
+ mcr p15, 0, ip, c7, c10, 4 @ data synchronization barrier
mov pc, lr
/*
@@ -80,7 +82,9 @@
add r0, r0, #PAGE_SZ
cmp r0, r1
blo 1b
+ mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB
mcr p15, 0, r2, c7, c10, 4 @ data synchronization barrier
+ mcr p15, 0, r2, c7, c5, 4 @ prefetch flush
mov pc, lr
.section ".text.init", #alloc, #execinstr
diff --git a/arch/arm/oprofile/Kconfig b/arch/arm/oprofile/Kconfig
index 19d3773..afd93ad 100644
--- a/arch/arm/oprofile/Kconfig
+++ b/arch/arm/oprofile/Kconfig
@@ -19,5 +19,24 @@
If unsure, say N.
+if OPROFILE
+
+config OPROFILE_ARMV6
+ bool
+ depends on CPU_V6 && !SMP
+ default y
+ select OPROFILE_ARM11_CORE
+
+config OPROFILE_MPCORE
+ bool
+ depends on CPU_V6 && SMP
+ default y
+ select OPROFILE_ARM11_CORE
+
+config OPROFILE_ARM11_CORE
+ bool
+
+endif
+
endmenu
diff --git a/arch/arm/oprofile/Makefile b/arch/arm/oprofile/Makefile
index 6a94e54..e61d0cc 100644
--- a/arch/arm/oprofile/Makefile
+++ b/arch/arm/oprofile/Makefile
@@ -8,4 +8,6 @@
oprofile-y := $(DRIVER_OBJS) common.o backtrace.o
oprofile-$(CONFIG_CPU_XSCALE) += op_model_xscale.o
-
+oprofile-$(CONFIG_OPROFILE_ARM11_CORE) += op_model_arm11_core.o
+oprofile-$(CONFIG_OPROFILE_ARMV6) += op_model_v6.o
+oprofile-$(CONFIG_OPROFILE_MPCORE) += op_model_mpcore.o
diff --git a/arch/arm/oprofile/common.c b/arch/arm/oprofile/common.c
index 6f83335..0a007b9 100644
--- a/arch/arm/oprofile/common.c
+++ b/arch/arm/oprofile/common.c
@@ -135,6 +135,14 @@
spec = &op_xscale_spec;
#endif
+#ifdef CONFIG_OPROFILE_ARMV6
+ spec = &op_armv6_spec;
+#endif
+
+#ifdef CONFIG_OPROFILE_MPCORE
+ spec = &op_mpcore_spec;
+#endif
+
if (spec) {
ret = spec->init();
if (ret < 0)
diff --git a/arch/arm/oprofile/op_arm_model.h b/arch/arm/oprofile/op_arm_model.h
index 38c6ad1..4899c62 100644
--- a/arch/arm/oprofile/op_arm_model.h
+++ b/arch/arm/oprofile/op_arm_model.h
@@ -24,6 +24,9 @@
extern struct op_arm_model_spec op_xscale_spec;
#endif
+extern struct op_arm_model_spec op_armv6_spec;
+extern struct op_arm_model_spec op_mpcore_spec;
+
extern void arm_backtrace(struct pt_regs * const regs, unsigned int depth);
extern int __init op_arm_init(struct oprofile_operations *ops, struct op_arm_model_spec *spec);
diff --git a/arch/arm/oprofile/op_model_arm11_core.c b/arch/arm/oprofile/op_model_arm11_core.c
new file mode 100644
index 0000000..ad80752
--- /dev/null
+++ b/arch/arm/oprofile/op_model_arm11_core.c
@@ -0,0 +1,162 @@
+/**
+ * @file op_model_arm11_core.c
+ * ARM11 Event Monitor Driver
+ * @remark Copyright 2004 ARM SMP Development Team
+ */
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/oprofile.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/smp.h>
+
+#include "op_counter.h"
+#include "op_arm_model.h"
+#include "op_model_arm11_core.h"
+
+/*
+ * ARM11 PMU support
+ */
+static inline void arm11_write_pmnc(u32 val)
+{
+ /* upper 4bits and 7, 11 are write-as-0 */
+ val &= 0x0ffff77f;
+ asm volatile("mcr p15, 0, %0, c15, c12, 0" : : "r" (val));
+}
+
+static inline u32 arm11_read_pmnc(void)
+{
+ u32 val;
+ asm volatile("mrc p15, 0, %0, c15, c12, 0" : "=r" (val));
+ return val;
+}
+
+static void arm11_reset_counter(unsigned int cnt)
+{
+ u32 val = -(u32)counter_config[CPU_COUNTER(smp_processor_id(), cnt)].count;
+ switch (cnt) {
+ case CCNT:
+ asm volatile("mcr p15, 0, %0, c15, c12, 1" : : "r" (val));
+ break;
+
+ case PMN0:
+ asm volatile("mcr p15, 0, %0, c15, c12, 2" : : "r" (val));
+ break;
+
+ case PMN1:
+ asm volatile("mcr p15, 0, %0, c15, c12, 3" : : "r" (val));
+ break;
+ }
+}
+
+int arm11_setup_pmu(void)
+{
+ unsigned int cnt;
+ u32 pmnc;
+
+ if (arm11_read_pmnc() & PMCR_E) {
+ printk(KERN_ERR "oprofile: CPU%u PMU still enabled when setup new event counter.\n", smp_processor_id());
+ return -EBUSY;
+ }
+
+ /* initialize PMNC, reset overflow, D bit, C bit and P bit. */
+ arm11_write_pmnc(PMCR_OFL_PMN0 | PMCR_OFL_PMN1 | PMCR_OFL_CCNT |
+ PMCR_C | PMCR_P);
+
+ for (pmnc = 0, cnt = PMN0; cnt <= CCNT; cnt++) {
+ unsigned long event;
+
+ if (!counter_config[CPU_COUNTER(smp_processor_id(), cnt)].enabled)
+ continue;
+
+ event = counter_config[CPU_COUNTER(smp_processor_id(), cnt)].event & 255;
+
+ /*
+ * Set event (if destined for PMNx counters)
+ */
+ if (cnt == PMN0) {
+ pmnc |= event << 20;
+ } else if (cnt == PMN1) {
+ pmnc |= event << 12;
+ }
+
+ /*
+ * We don't need to set the event if it's a cycle count
+ * Enable interrupt for this counter
+ */
+ pmnc |= PMCR_IEN_PMN0 << cnt;
+ arm11_reset_counter(cnt);
+ }
+ arm11_write_pmnc(pmnc);
+
+ return 0;
+}
+
+int arm11_start_pmu(void)
+{
+ arm11_write_pmnc(arm11_read_pmnc() | PMCR_E);
+ return 0;
+}
+
+int arm11_stop_pmu(void)
+{
+ unsigned int cnt;
+
+ arm11_write_pmnc(arm11_read_pmnc() & ~PMCR_E);
+
+ for (cnt = PMN0; cnt <= CCNT; cnt++)
+ arm11_reset_counter(cnt);
+
+ return 0;
+}
+
+/*
+ * CPU counters' IRQ handler (one IRQ per CPU)
+ */
+static irqreturn_t arm11_pmu_interrupt(int irq, void *arg)
+{
+ struct pt_regs *regs = get_irq_regs();
+ unsigned int cnt;
+ u32 pmnc;
+
+ pmnc = arm11_read_pmnc();
+
+ for (cnt = PMN0; cnt <= CCNT; cnt++) {
+ if ((pmnc & (PMCR_OFL_PMN0 << cnt)) && (pmnc & (PMCR_IEN_PMN0 << cnt))) {
+ arm11_reset_counter(cnt);
+ oprofile_add_sample(regs, CPU_COUNTER(smp_processor_id(), cnt));
+ }
+ }
+ /* Clear counter flag(s) */
+ arm11_write_pmnc(pmnc);
+ return IRQ_HANDLED;
+}
+
+int arm11_request_interrupts(int *irqs, int nr)
+{
+ unsigned int i;
+ int ret = 0;
+
+ for(i = 0; i < nr; i++) {
+ ret = request_irq(irqs[i], arm11_pmu_interrupt, IRQF_DISABLED, "CP15 PMU", NULL);
+ if (ret != 0) {
+ printk(KERN_ERR "oprofile: unable to request IRQ%u for MPCORE-EM\n",
+ irqs[i]);
+ break;
+ }
+ }
+
+ if (i != nr)
+ while (i-- != 0)
+ free_irq(irqs[i], NULL);
+
+ return ret;
+}
+
+void arm11_release_interrupts(int *irqs, int nr)
+{
+ unsigned int i;
+
+ for (i = 0; i < nr; i++)
+ free_irq(irqs[i], NULL);
+}
diff --git a/arch/arm/oprofile/op_model_arm11_core.h b/arch/arm/oprofile/op_model_arm11_core.h
new file mode 100644
index 0000000..6f8538e
--- /dev/null
+++ b/arch/arm/oprofile/op_model_arm11_core.h
@@ -0,0 +1,45 @@
+/**
+ * @file op_model_arm11_core.h
+ * ARM11 Event Monitor Driver
+ * @remark Copyright 2004 ARM SMP Development Team
+ * @remark Copyright 2000-2004 Deepak Saxena <dsaxena@mvista.com>
+ * @remark Copyright 2000-2004 MontaVista Software Inc
+ * @remark Copyright 2004 Dave Jiang <dave.jiang@intel.com>
+ * @remark Copyright 2004 Intel Corporation
+ * @remark Copyright 2004 Zwane Mwaikambo <zwane@arm.linux.org.uk>
+ * @remark Copyright 2004 Oprofile Authors
+ *
+ * @remark Read the file COPYING
+ *
+ * @author Zwane Mwaikambo
+ */
+#ifndef OP_MODEL_ARM11_CORE_H
+#define OP_MODEL_ARM11_CORE_H
+
+/*
+ * Per-CPU PMCR
+ */
+#define PMCR_E (1 << 0) /* Enable */
+#define PMCR_P (1 << 1) /* Count reset */
+#define PMCR_C (1 << 2) /* Cycle counter reset */
+#define PMCR_D (1 << 3) /* Cycle counter counts every 64th cpu cycle */
+#define PMCR_IEN_PMN0 (1 << 4) /* Interrupt enable count reg 0 */
+#define PMCR_IEN_PMN1 (1 << 5) /* Interrupt enable count reg 1 */
+#define PMCR_IEN_CCNT (1 << 6) /* Interrupt enable cycle counter */
+#define PMCR_OFL_PMN0 (1 << 8) /* Count reg 0 overflow */
+#define PMCR_OFL_PMN1 (1 << 9) /* Count reg 1 overflow */
+#define PMCR_OFL_CCNT (1 << 10) /* Cycle counter overflow */
+
+#define PMN0 0
+#define PMN1 1
+#define CCNT 2
+
+#define CPU_COUNTER(cpu, counter) ((cpu) * 3 + (counter))
+
+int arm11_setup_pmu(void);
+int arm11_start_pmu(void);
+int arm11_stop_pmu(void);
+int arm11_request_interrupts(int *, int);
+void arm11_release_interrupts(int *, int);
+
+#endif
diff --git a/arch/arm/oprofile/op_model_mpcore.c b/arch/arm/oprofile/op_model_mpcore.c
new file mode 100644
index 0000000..8985007
--- /dev/null
+++ b/arch/arm/oprofile/op_model_mpcore.c
@@ -0,0 +1,296 @@
+/**
+ * @file op_model_mpcore.c
+ * MPCORE Event Monitor Driver
+ * @remark Copyright 2004 ARM SMP Development Team
+ * @remark Copyright 2000-2004 Deepak Saxena <dsaxena@mvista.com>
+ * @remark Copyright 2000-2004 MontaVista Software Inc
+ * @remark Copyright 2004 Dave Jiang <dave.jiang@intel.com>
+ * @remark Copyright 2004 Intel Corporation
+ * @remark Copyright 2004 Zwane Mwaikambo <zwane@arm.linux.org.uk>
+ * @remark Copyright 2004 Oprofile Authors
+ *
+ * @remark Read the file COPYING
+ *
+ * @author Zwane Mwaikambo
+ *
+ * Counters:
+ * 0: PMN0 on CPU0, per-cpu configurable event counter
+ * 1: PMN1 on CPU0, per-cpu configurable event counter
+ * 2: CCNT on CPU0
+ * 3: PMN0 on CPU1
+ * 4: PMN1 on CPU1
+ * 5: CCNT on CPU1
+ * 6: PMN0 on CPU1
+ * 7: PMN1 on CPU1
+ * 8: CCNT on CPU1
+ * 9: PMN0 on CPU1
+ * 10: PMN1 on CPU1
+ * 11: CCNT on CPU1
+ * 12-19: configurable SCU event counters
+ */
+
+/* #define DEBUG */
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/oprofile.h>
+#include <linux/interrupt.h>
+#include <linux/smp.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mach/irq.h>
+#include <asm/hardware.h>
+#include <asm/system.h>
+
+#include "op_counter.h"
+#include "op_arm_model.h"
+#include "op_model_arm11_core.h"
+#include "op_model_mpcore.h"
+
+/*
+ * MPCore SCU event monitor support
+ */
+#define SCU_EVENTMONITORS_VA_BASE __io_address(REALVIEW_MPCORE_SCU_BASE + 0x10)
+
+/*
+ * Bitmask of used SCU counters
+ */
+static unsigned int scu_em_used;
+
+/*
+ * 2 helper fns take a counter number from 0-7 (not the userspace-visible counter number)
+ */
+static inline void scu_reset_counter(struct eventmonitor __iomem *emc, unsigned int n)
+{
+ writel(-(u32)counter_config[SCU_COUNTER(n)].count, &emc->MC[n]);
+}
+
+static inline void scu_set_event(struct eventmonitor __iomem *emc, unsigned int n, u32 event)
+{
+ event &= 0xff;
+ writeb(event, &emc->MCEB[n]);
+}
+
+/*
+ * SCU counters' IRQ handler (one IRQ per counter => 2 IRQs per CPU)
+ */
+static irqreturn_t scu_em_interrupt(int irq, void *arg)
+{
+ struct eventmonitor __iomem *emc = SCU_EVENTMONITORS_VA_BASE;
+ unsigned int cnt;
+
+ cnt = irq - IRQ_PMU_SCU0;
+ oprofile_add_sample(get_irq_regs(), SCU_COUNTER(cnt));
+ scu_reset_counter(emc, cnt);
+
+ /* Clear overflow flag for this counter */
+ writel(1 << (cnt + 16), &emc->PMCR);
+
+ return IRQ_HANDLED;
+}
+
+/* Configure just the SCU counters that the user has requested */
+static void scu_setup(void)
+{
+ struct eventmonitor __iomem *emc = SCU_EVENTMONITORS_VA_BASE;
+ unsigned int i;
+
+ scu_em_used = 0;
+
+ for (i = 0; i < NUM_SCU_COUNTERS; i++) {
+ if (counter_config[SCU_COUNTER(i)].enabled &&
+ counter_config[SCU_COUNTER(i)].event) {
+ scu_set_event(emc, i, 0); /* disable counter for now */
+ scu_em_used |= 1 << i;
+ }
+ }
+}
+
+static int scu_start(void)
+{
+ struct eventmonitor __iomem *emc = SCU_EVENTMONITORS_VA_BASE;
+ unsigned int temp, i;
+ unsigned long event;
+ int ret = 0;
+
+ /*
+ * request the SCU counter interrupts that we need
+ */
+ for (i = 0; i < NUM_SCU_COUNTERS; i++) {
+ if (scu_em_used & (1 << i)) {
+ ret = request_irq(IRQ_PMU_SCU0 + i, scu_em_interrupt, IRQF_DISABLED, "SCU PMU", NULL);
+ if (ret) {
+ printk(KERN_ERR "oprofile: unable to request IRQ%u for SCU Event Monitor\n",
+ IRQ_PMU_SCU0 + i);
+ goto err_free_scu;
+ }
+ }
+ }
+
+ /*
+ * clear overflow and enable interrupt for all used counters
+ */
+ temp = readl(&emc->PMCR);
+ for (i = 0; i < NUM_SCU_COUNTERS; i++) {
+ if (scu_em_used & (1 << i)) {
+ scu_reset_counter(emc, i);
+ event = counter_config[SCU_COUNTER(i)].event;
+ scu_set_event(emc, i, event);
+
+ /* clear overflow/interrupt */
+ temp |= 1 << (i + 16);
+ /* enable interrupt*/
+ temp |= 1 << (i + 8);
+ }
+ }
+
+ /* Enable all 8 counters */
+ temp |= PMCR_E;
+ writel(temp, &emc->PMCR);
+
+ return 0;
+
+ err_free_scu:
+ while (i--)
+ free_irq(IRQ_PMU_SCU0 + i, NULL);
+ return ret;
+}
+
+static void scu_stop(void)
+{
+ struct eventmonitor __iomem *emc = SCU_EVENTMONITORS_VA_BASE;
+ unsigned int temp, i;
+
+ /* Disable counter interrupts */
+ /* Don't disable all 8 counters (with the E bit) as they may be in use */
+ temp = readl(&emc->PMCR);
+ for (i = 0; i < NUM_SCU_COUNTERS; i++) {
+ if (scu_em_used & (1 << i))
+ temp &= ~(1 << (i + 8));
+ }
+ writel(temp, &emc->PMCR);
+
+ /* Free counter interrupts and reset counters */
+ for (i = 0; i < NUM_SCU_COUNTERS; i++) {
+ if (scu_em_used & (1 << i)) {
+ scu_reset_counter(emc, i);
+ free_irq(IRQ_PMU_SCU0 + i, NULL);
+ }
+ }
+}
+
+struct em_function_data {
+ int (*fn)(void);
+ int ret;
+};
+
+static void em_func(void *data)
+{
+ struct em_function_data *d = data;
+ int ret = d->fn();
+ if (ret)
+ d->ret = ret;
+}
+
+static int em_call_function(int (*fn)(void))
+{
+ struct em_function_data data;
+
+ data.fn = fn;
+ data.ret = 0;
+
+ smp_call_function(em_func, &data, 1, 1);
+ em_func(&data);
+
+ return data.ret;
+}
+
+/*
+ * Glue to stick the individual ARM11 PMUs and the SCU
+ * into the oprofile framework.
+ */
+static int em_setup_ctrs(void)
+{
+ int ret;
+
+ /* Configure CPU counters by cross-calling to the other CPUs */
+ ret = em_call_function(arm11_setup_pmu);
+ if (ret == 0)
+ scu_setup();
+
+ return 0;
+}
+
+static int arm11_irqs[] = {
+ [0] = IRQ_PMU_CPU0,
+ [1] = IRQ_PMU_CPU1,
+ [2] = IRQ_PMU_CPU2,
+ [3] = IRQ_PMU_CPU3
+};
+
+static int em_start(void)
+{
+ int ret;
+
+ ret = arm11_request_interrupts(arm11_irqs, ARRAY_SIZE(arm11_irqs));
+ if (ret == 0) {
+ em_call_function(arm11_start_pmu);
+
+ ret = scu_start();
+ if (ret)
+ arm11_release_interrupts(arm11_irqs, ARRAY_SIZE(arm11_irqs));
+ }
+ return ret;
+}
+
+static void em_stop(void)
+{
+ em_call_function(arm11_stop_pmu);
+ arm11_release_interrupts(arm11_irqs, ARRAY_SIZE(arm11_irqs));
+ scu_stop();
+}
+
+/*
+ * Why isn't there a function to route an IRQ to a specific CPU in
+ * genirq?
+ */
+static void em_route_irq(int irq, unsigned int cpu)
+{
+ irq_desc[irq].affinity = cpumask_of_cpu(cpu);
+ irq_desc[irq].chip->set_affinity(irq, cpumask_of_cpu(cpu));
+}
+
+static int em_setup(void)
+{
+ /*
+ * Send SCU PMU interrupts to the "owner" CPU.
+ */
+ em_route_irq(IRQ_PMU_SCU0, 0);
+ em_route_irq(IRQ_PMU_SCU1, 0);
+ em_route_irq(IRQ_PMU_SCU2, 1);
+ em_route_irq(IRQ_PMU_SCU3, 1);
+ em_route_irq(IRQ_PMU_SCU4, 2);
+ em_route_irq(IRQ_PMU_SCU5, 2);
+ em_route_irq(IRQ_PMU_SCU6, 3);
+ em_route_irq(IRQ_PMU_SCU7, 3);
+
+ /*
+ * Send CP15 PMU interrupts to the owner CPU.
+ */
+ em_route_irq(IRQ_PMU_CPU0, 0);
+ em_route_irq(IRQ_PMU_CPU1, 1);
+ em_route_irq(IRQ_PMU_CPU2, 2);
+ em_route_irq(IRQ_PMU_CPU3, 3);
+
+ return 0;
+}
+
+struct op_arm_model_spec op_mpcore_spec = {
+ .init = em_setup,
+ .num_counters = MPCORE_NUM_COUNTERS,
+ .setup_ctrs = em_setup_ctrs,
+ .start = em_start,
+ .stop = em_stop,
+ .name = "arm/mpcore",
+};
diff --git a/arch/arm/oprofile/op_model_mpcore.h b/arch/arm/oprofile/op_model_mpcore.h
new file mode 100644
index 0000000..73d8110
--- /dev/null
+++ b/arch/arm/oprofile/op_model_mpcore.h
@@ -0,0 +1,61 @@
+/**
+ * @file op_model_mpcore.c
+ * MPCORE Event Monitor Driver
+ * @remark Copyright 2004 ARM SMP Development Team
+ * @remark Copyright 2000-2004 Deepak Saxena <dsaxena@mvista.com>
+ * @remark Copyright 2000-2004 MontaVista Software Inc
+ * @remark Copyright 2004 Dave Jiang <dave.jiang@intel.com>
+ * @remark Copyright 2004 Intel Corporation
+ * @remark Copyright 2004 Zwane Mwaikambo <zwane@arm.linux.org.uk>
+ * @remark Copyright 2004 Oprofile Authors
+ *
+ * @remark Read the file COPYING
+ *
+ * @author Zwane Mwaikambo
+ */
+#ifndef OP_MODEL_MPCORE_H
+#define OP_MODEL_MPCORE_H
+
+struct eventmonitor {
+ unsigned long PMCR;
+ unsigned char MCEB[8];
+ unsigned long MC[8];
+};
+
+/*
+ * List of userspace counter numbers: note that the structure is important.
+ * The code relies on CPUn's counters being CPU0's counters + 3n
+ * and on CPU0's counters starting at 0
+ */
+
+#define COUNTER_CPU0_PMN0 0
+#define COUNTER_CPU0_PMN1 1
+#define COUNTER_CPU0_CCNT 2
+
+#define COUNTER_CPU1_PMN0 3
+#define COUNTER_CPU1_PMN1 4
+#define COUNTER_CPU1_CCNT 5
+
+#define COUNTER_CPU2_PMN0 6
+#define COUNTER_CPU2_PMN1 7
+#define COUNTER_CPU2_CCNT 8
+
+#define COUNTER_CPU3_PMN0 9
+#define COUNTER_CPU3_PMN1 10
+#define COUNTER_CPU3_CCNT 11
+
+#define COUNTER_SCU_MN0 12
+#define COUNTER_SCU_MN1 13
+#define COUNTER_SCU_MN2 14
+#define COUNTER_SCU_MN3 15
+#define COUNTER_SCU_MN4 16
+#define COUNTER_SCU_MN5 17
+#define COUNTER_SCU_MN6 18
+#define COUNTER_SCU_MN7 19
+#define NUM_SCU_COUNTERS 8
+
+#define SCU_COUNTER(number) ((number) + COUNTER_SCU_MN0)
+
+#define MPCORE_NUM_COUNTERS SCU_COUNTER(NUM_SCU_COUNTERS)
+
+#endif
diff --git a/arch/arm/oprofile/op_model_v6.c b/arch/arm/oprofile/op_model_v6.c
new file mode 100644
index 0000000..fe58138
--- /dev/null
+++ b/arch/arm/oprofile/op_model_v6.c
@@ -0,0 +1,67 @@
+/**
+ * @file op_model_v6.c
+ * ARM11 Performance Monitor Driver
+ *
+ * Based on op_model_xscale.c
+ *
+ * @remark Copyright 2000-2004 Deepak Saxena <dsaxena@mvista.com>
+ * @remark Copyright 2000-2004 MontaVista Software Inc
+ * @remark Copyright 2004 Dave Jiang <dave.jiang@intel.com>
+ * @remark Copyright 2004 Intel Corporation
+ * @remark Copyright 2004 Zwane Mwaikambo <zwane@arm.linux.org.uk>
+ * @remark Copyright 2004 OProfile Authors
+ *
+ * @remark Read the file COPYING
+ *
+ * @author Tony Lindgren <tony@atomide.com>
+ */
+
+/* #define DEBUG */
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/oprofile.h>
+#include <linux/interrupt.h>
+#include <asm/irq.h>
+#include <asm/system.h>
+
+#include "op_counter.h"
+#include "op_arm_model.h"
+#include "op_model_arm11_core.h"
+
+static int irqs[] = {
+#ifdef CONFIG_ARCH_OMAP2
+ 3,
+#endif
+};
+
+static void armv6_pmu_stop(void)
+{
+ arm11_stop_pmu();
+ arm11_release_interrupts(irqs, ARRAY_SIZE(irqs));
+}
+
+static int armv6_pmu_start(void)
+{
+ int ret;
+
+ ret = arm11_request_interrupts(irqs, ARRAY_SIZE(irqs));
+ if (ret >= 0)
+ ret = arm11_start_pmu();
+
+ return ret;
+}
+
+static int armv6_detect_pmu(void)
+{
+ return 0;
+}
+
+struct op_arm_model_spec op_armv6_spec = {
+ .init = armv6_detect_pmu,
+ .num_counters = 3,
+ .setup_ctrs = arm11_setup_pmu,
+ .start = armv6_pmu_start,
+ .stop = armv6_pmu_stop,
+ .name = "arm/armv6",
+};
diff --git a/arch/arm/plat-iop/Makefile b/arch/arm/plat-iop/Makefile
index 23da00b..3250d73 100644
--- a/arch/arm/plat-iop/Makefile
+++ b/arch/arm/plat-iop/Makefile
@@ -2,7 +2,29 @@
# Makefile for the linux kernel.
#
-obj-y := gpio.o i2c.o pci.o setup.o time.o
-obj-m :=
-obj-n :=
-obj- :=
+obj-y :=
+
+# IOP32X
+obj-$(CONFIG_ARCH_IOP32X) += gpio.o
+obj-$(CONFIG_ARCH_IOP32X) += i2c.o
+obj-$(CONFIG_ARCH_IOP32X) += pci.o
+obj-$(CONFIG_ARCH_IOP32X) += setup.o
+obj-$(CONFIG_ARCH_IOP32X) += time.o
+obj-$(CONFIG_ARCH_IOP32X) += io.o
+obj-$(CONFIG_ARCH_IOP32X) += cp6.o
+
+# IOP33X
+obj-$(CONFIG_ARCH_IOP33X) += gpio.o
+obj-$(CONFIG_ARCH_IOP33X) += i2c.o
+obj-$(CONFIG_ARCH_IOP33X) += pci.o
+obj-$(CONFIG_ARCH_IOP33X) += setup.o
+obj-$(CONFIG_ARCH_IOP33X) += time.o
+obj-$(CONFIG_ARCH_IOP33X) += io.o
+obj-$(CONFIG_ARCH_IOP33X) += cp6.o
+
+# IOP13XX
+obj-$(CONFIG_ARCH_IOP13XX) += cp6.o
+
+obj-m :=
+obj-n :=
+obj- :=
diff --git a/arch/arm/plat-iop/cp6.c b/arch/arm/plat-iop/cp6.c
new file mode 100644
index 0000000..9612a87
--- /dev/null
+++ b/arch/arm/plat-iop/cp6.c
@@ -0,0 +1,50 @@
+/*
+ * IOP Coprocessor-6 access handler
+ * Copyright (c) 2006, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+ * Place - Suite 330, Boston, MA 02111-1307 USA.
+ *
+ */
+#include <linux/init.h>
+#include <asm/traps.h>
+
+static int cp6_trap(struct pt_regs *regs, unsigned int instr)
+{
+ u32 temp;
+
+ /* enable cp6 access */
+ asm volatile (
+ "mrc p15, 0, %0, c15, c1, 0\n\t"
+ "orr %0, %0, #(1 << 6)\n\t"
+ "mcr p15, 0, %0, c15, c1, 0\n\t"
+ : "=r"(temp));
+
+ return 0;
+}
+
+/* permit kernel space cp6 access
+ * deny user space cp6 access
+ */
+static struct undef_hook cp6_hook = {
+ .instr_mask = 0x0f000ff0,
+ .instr_val = 0x0e000610,
+ .cpsr_mask = MODE_MASK,
+ .cpsr_val = SVC_MODE,
+ .fn = cp6_trap,
+};
+
+void __init iop_init_cp6_handler(void)
+{
+ register_undef_hook(&cp6_hook);
+}
diff --git a/arch/arm/plat-iop/io.c b/arch/arm/plat-iop/io.c
new file mode 100644
index 0000000..f7eccec
--- /dev/null
+++ b/arch/arm/plat-iop/io.c
@@ -0,0 +1,58 @@
+/*
+ * iop3xx custom ioremap implementation
+ * Copyright (c) 2006, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+ * Place - Suite 330, Boston, MA 02111-1307 USA.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <asm/hardware.h>
+#include <asm/io.h>
+
+void * __iomem __iop3xx_ioremap(unsigned long cookie, size_t size,
+ unsigned long flags)
+{
+ void __iomem * retval;
+
+ switch (cookie) {
+ case IOP3XX_PCI_LOWER_IO_PA ... IOP3XX_PCI_UPPER_IO_PA:
+ retval = (void *) IOP3XX_PCI_IO_PHYS_TO_VIRT(cookie);
+ break;
+ case IOP3XX_PERIPHERAL_PHYS_BASE ... IOP3XX_PERIPHERAL_UPPER_PA:
+ retval = (void *) IOP3XX_PMMR_PHYS_TO_VIRT(cookie);
+ break;
+ default:
+ retval = __ioremap(cookie, size, flags);
+ }
+
+ return retval;
+}
+EXPORT_SYMBOL(__iop3xx_ioremap);
+
+void __iop3xx_iounmap(void __iomem *addr)
+{
+ extern void __iounmap(volatile void __iomem *addr);
+
+ switch ((u32) addr) {
+ case IOP3XX_PCI_LOWER_IO_VA ... IOP3XX_PCI_UPPER_IO_VA:
+ case IOP3XX_PERIPHERAL_VIRT_BASE ... IOP3XX_PERIPHERAL_UPPER_VA:
+ goto skip;
+ }
+ __iounmap(addr);
+
+skip:
+ return;
+}
+EXPORT_SYMBOL(__iop3xx_iounmap);
diff --git a/arch/arm/plat-iop/pci.c b/arch/arm/plat-iop/pci.c
index e647812..b5f6ec3 100644
--- a/arch/arm/plat-iop/pci.c
+++ b/arch/arm/plat-iop/pci.c
@@ -196,8 +196,8 @@
if (!res)
panic("PCI: unable to alloc resources");
- res[0].start = IOP3XX_PCI_LOWER_IO_VA;
- res[0].end = IOP3XX_PCI_LOWER_IO_VA + IOP3XX_PCI_IO_WINDOW_SIZE - 1;
+ res[0].start = IOP3XX_PCI_LOWER_IO_PA;
+ res[0].end = IOP3XX_PCI_LOWER_IO_PA + IOP3XX_PCI_IO_WINDOW_SIZE - 1;
res[0].name = "IOP3XX PCI I/O Space";
res[0].flags = IORESOURCE_IO;
request_resource(&ioport_resource, &res[0]);
@@ -209,7 +209,7 @@
request_resource(&iomem_resource, &res[1]);
sys->mem_offset = IOP3XX_PCI_LOWER_MEM_PA - IOP3XX_PCI_LOWER_MEM_BA;
- sys->io_offset = IOP3XX_PCI_LOWER_IO_VA - IOP3XX_PCI_LOWER_IO_BA;
+ sys->io_offset = IOP3XX_PCI_LOWER_IO_PA - IOP3XX_PCI_LOWER_IO_BA;
sys->resource[0] = &res[0];
sys->resource[1] = &res[1];
diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
new file mode 100644
index 0000000..e223431
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -0,0 +1,99 @@
+# arch/arm/plat-s3c24xx/Kconfig
+#
+# Copyright 2007 Simtec Electronics
+#
+# Licensed under GPLv2
+
+config PLAT_S3C24XX
+ bool
+ depends on ARCH_S3C2410
+ default y if ARCH_S3C2410
+ help
+ Base platform code for any Samsung S3C device
+
+if PLAT_S3C24XX
+
+config CPU_S3C244X
+ bool
+ depends on ARCH_S3C2410 && (CPU_S3C2440 || CPU_S3C2442)
+ help
+ Support for S3C2440 and S3C2442 Samsung Mobile CPU based systems.
+
+config PM_SIMTEC
+ bool
+ help
+ Common power management code for systems that are
+ compatible with the Simtec style of power management
+
+config S3C2410_BOOT_WATCHDOG
+ bool "S3C2410 Initialisation watchdog"
+ depends on ARCH_S3C2410 && S3C2410_WATCHDOG
+ help
+ Say y to enable the watchdog during the kernel decompression
+ stage. If the kernel fails to uncompress, then the watchdog
+ will trigger a reset and the system should restart.
+
+config S3C2410_BOOT_ERROR_RESET
+ bool "S3C2410 Reboot on decompression error"
+ depends on ARCH_S3C2410
+ help
+ Say y here to use the watchdog to reset the system if the
+ kernel decompressor detects an error during decompression.
+
+config S3C2410_PM_DEBUG
+ bool "S3C2410 PM Suspend debug"
+ depends on ARCH_S3C2410 && PM
+ help
+ Say Y here if you want verbose debugging from the PM Suspend and
+ Resume code. See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
+ for more information.
+
+config S3C2410_PM_CHECK
+ bool "S3C2410 PM Suspend Memory CRC"
+ depends on ARCH_S3C2410 && PM && CRC32
+ help
+ Enable the PM code's memory area checksum over sleep. This option
+ will generate CRCs of all blocks of memory, and store them before
+ going to sleep. The blocks are then checked on resume for any
+ errors.
+
+config S3C2410_PM_CHECK_CHUNKSIZE
+ int "S3C2410 PM Suspend CRC Chunksize (KiB)"
+ depends on ARCH_S3C2410 && PM && S3C2410_PM_CHECK
+ default 64
+ help
+ Set the chunksize in Kilobytes of the CRC for checking memory
+ corruption over suspend and resume. A smaller value will mean that
+ the CRC data block will take more memory, but wil identify any
+ faults with better precision.
+
+config S3C2410_LOWLEVEL_UART_PORT
+ int "S3C2410 UART to use for low-level messages"
+ default 0
+ help
+ Choice of which UART port to use for the low-level messages,
+ such as the `Uncompressing...` at start time. The value of
+ this configuration should be between zero and two. The port
+ must have been initialised by the boot-loader before use.
+
+config S3C2410_DMA
+ bool "S3C2410 DMA support"
+ depends on ARCH_S3C2410
+ help
+ S3C2410 DMA support. This is needed for drivers like sound which
+ use the S3C2410's DMA system to move data to and from the
+ peripheral blocks.
+
+config S3C2410_DMA_DEBUG
+ bool "S3C2410 DMA support debug"
+ depends on ARCH_S3C2410 && S3C2410_DMA
+ help
+ Enable debugging output for the DMA code. This option sends info
+ to the kernel log, at priority KERN_DEBUG.
+
+config MACH_SMDK
+ bool
+ help
+ Common machine code for SMDK2410 and SMDK2440
+
+endif
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
new file mode 100644
index 0000000..8e5ccaa
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -0,0 +1,30 @@
+# arch/arm/plat-s3c24xx/Makefile
+#
+# Copyright 2007 Simtec Electronics
+#
+# Licensed under GPLv2
+
+obj-y :=
+obj-m :=
+obj-n :=
+obj- :=
+
+
+# Core files
+
+obj-y += cpu.o
+obj-y += irq.o
+obj-y += devs.o
+obj-y += gpio.o
+obj-y += time.o
+obj-y += clock.o
+
+# Architecture dependant builds
+
+obj-$(CONFIG_CPU_S3C244X) += s3c244x.o
+obj-$(CONFIG_CPU_S3C244X) += s3c244x-irq.o
+obj-$(CONFIG_PM_SIMTEC) += pm-simtec.o
+obj-$(CONFIG_PM) += pm.o
+obj-$(CONFIG_PM) += sleep.o
+obj-$(CONFIG_S3C2410_DMA) += dma.o
+obj-$(CONFIG_MACH_SMDK) += common-smdk.o
diff --git a/arch/arm/plat-s3c24xx/clock.c b/arch/arm/plat-s3c24xx/clock.c
new file mode 100644
index 0000000..d3dc03a
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/clock.c
@@ -0,0 +1,449 @@
+/* linux/arch/arm/plat-s3c24xx/clock.c
+ *
+ * Copyright (c) 2004-2005 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX Core clock control support
+ *
+ * Based on, and code from linux/arch/arm/mach-versatile/clock.c
+ **
+ ** Copyright (C) 2004 ARM Limited.
+ ** Written by Deep Blue Solutions Limited.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/clk.h>
+#include <linux/mutex.h>
+#include <linux/delay.h>
+
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+
+#include <asm/arch/regs-clock.h>
+#include <asm/arch/regs-gpio.h>
+
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/cpu.h>
+
+/* clock information */
+
+static LIST_HEAD(clocks);
+
+DEFINE_MUTEX(clocks_mutex);
+
+/* enable and disable calls for use with the clk struct */
+
+static int clk_null_enable(struct clk *clk, int enable)
+{
+ return 0;
+}
+
+/* Clock API calls */
+
+struct clk *clk_get(struct device *dev, const char *id)
+{
+ struct clk *p;
+ struct clk *clk = ERR_PTR(-ENOENT);
+ int idno;
+
+ if (dev == NULL || dev->bus != &platform_bus_type)
+ idno = -1;
+ else
+ idno = to_platform_device(dev)->id;
+
+ mutex_lock(&clocks_mutex);
+
+ list_for_each_entry(p, &clocks, list) {
+ if (p->id == idno &&
+ strcmp(id, p->name) == 0 &&
+ try_module_get(p->owner)) {
+ clk = p;
+ break;
+ }
+ }
+
+ /* check for the case where a device was supplied, but the
+ * clock that was being searched for is not device specific */
+
+ if (IS_ERR(clk)) {
+ list_for_each_entry(p, &clocks, list) {
+ if (p->id == -1 && strcmp(id, p->name) == 0 &&
+ try_module_get(p->owner)) {
+ clk = p;
+ break;
+ }
+ }
+ }
+
+ mutex_unlock(&clocks_mutex);
+ return clk;
+}
+
+void clk_put(struct clk *clk)
+{
+ module_put(clk->owner);
+}
+
+int clk_enable(struct clk *clk)
+{
+ if (IS_ERR(clk) || clk == NULL)
+ return -EINVAL;
+
+ clk_enable(clk->parent);
+
+ mutex_lock(&clocks_mutex);
+
+ if ((clk->usage++) == 0)
+ (clk->enable)(clk, 1);
+
+ mutex_unlock(&clocks_mutex);
+ return 0;
+}
+
+void clk_disable(struct clk *clk)
+{
+ if (IS_ERR(clk) || clk == NULL)
+ return;
+
+ mutex_lock(&clocks_mutex);
+
+ if ((--clk->usage) == 0)
+ (clk->enable)(clk, 0);
+
+ mutex_unlock(&clocks_mutex);
+ clk_disable(clk->parent);
+}
+
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+ if (IS_ERR(clk))
+ return 0;
+
+ if (clk->rate != 0)
+ return clk->rate;
+
+ if (clk->get_rate != NULL)
+ return (clk->get_rate)(clk);
+
+ if (clk->parent != NULL)
+ return clk_get_rate(clk->parent);
+
+ return clk->rate;
+}
+
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+ if (!IS_ERR(clk) && clk->round_rate)
+ return (clk->round_rate)(clk, rate);
+
+ return rate;
+}
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+ int ret;
+
+ if (IS_ERR(clk))
+ return -EINVAL;
+
+ mutex_lock(&clocks_mutex);
+ ret = (clk->set_rate)(clk, rate);
+ mutex_unlock(&clocks_mutex);
+
+ return ret;
+}
+
+struct clk *clk_get_parent(struct clk *clk)
+{
+ return clk->parent;
+}
+
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+ int ret = 0;
+
+ if (IS_ERR(clk))
+ return -EINVAL;
+
+ mutex_lock(&clocks_mutex);
+
+ if (clk->set_parent)
+ ret = (clk->set_parent)(clk, parent);
+
+ mutex_unlock(&clocks_mutex);
+
+ return ret;
+}
+
+EXPORT_SYMBOL(clk_get);
+EXPORT_SYMBOL(clk_put);
+EXPORT_SYMBOL(clk_enable);
+EXPORT_SYMBOL(clk_disable);
+EXPORT_SYMBOL(clk_get_rate);
+EXPORT_SYMBOL(clk_round_rate);
+EXPORT_SYMBOL(clk_set_rate);
+EXPORT_SYMBOL(clk_get_parent);
+EXPORT_SYMBOL(clk_set_parent);
+
+/* base clocks */
+
+struct clk clk_xtal = {
+ .name = "xtal",
+ .id = -1,
+ .rate = 0,
+ .parent = NULL,
+ .ctrlbit = 0,
+};
+
+struct clk clk_mpll = {
+ .name = "mpll",
+ .id = -1,
+};
+
+struct clk clk_upll = {
+ .name = "upll",
+ .id = -1,
+ .parent = NULL,
+ .ctrlbit = 0,
+};
+
+struct clk clk_f = {
+ .name = "fclk",
+ .id = -1,
+ .rate = 0,
+ .parent = &clk_mpll,
+ .ctrlbit = 0,
+};
+
+struct clk clk_h = {
+ .name = "hclk",
+ .id = -1,
+ .rate = 0,
+ .parent = NULL,
+ .ctrlbit = 0,
+};
+
+struct clk clk_p = {
+ .name = "pclk",
+ .id = -1,
+ .rate = 0,
+ .parent = NULL,
+ .ctrlbit = 0,
+};
+
+struct clk clk_usb_bus = {
+ .name = "usb-bus",
+ .id = -1,
+ .rate = 0,
+ .parent = &clk_upll,
+};
+
+/* clocks that could be registered by external code */
+
+static int s3c24xx_dclk_enable(struct clk *clk, int enable)
+{
+ unsigned long dclkcon = __raw_readl(S3C24XX_DCLKCON);
+
+ if (enable)
+ dclkcon |= clk->ctrlbit;
+ else
+ dclkcon &= ~clk->ctrlbit;
+
+ __raw_writel(dclkcon, S3C24XX_DCLKCON);
+
+ return 0;
+}
+
+static int s3c24xx_dclk_setparent(struct clk *clk, struct clk *parent)
+{
+ unsigned long dclkcon;
+ unsigned int uclk;
+
+ if (parent == &clk_upll)
+ uclk = 1;
+ else if (parent == &clk_p)
+ uclk = 0;
+ else
+ return -EINVAL;
+
+ clk->parent = parent;
+
+ dclkcon = __raw_readl(S3C24XX_DCLKCON);
+
+ if (clk->ctrlbit == S3C2410_DCLKCON_DCLK0EN) {
+ if (uclk)
+ dclkcon |= S3C2410_DCLKCON_DCLK0_UCLK;
+ else
+ dclkcon &= ~S3C2410_DCLKCON_DCLK0_UCLK;
+ } else {
+ if (uclk)
+ dclkcon |= S3C2410_DCLKCON_DCLK1_UCLK;
+ else
+ dclkcon &= ~S3C2410_DCLKCON_DCLK1_UCLK;
+ }
+
+ __raw_writel(dclkcon, S3C24XX_DCLKCON);
+
+ return 0;
+}
+
+
+static int s3c24xx_clkout_setparent(struct clk *clk, struct clk *parent)
+{
+ unsigned long mask;
+ unsigned long source;
+
+ /* calculate the MISCCR setting for the clock */
+
+ if (parent == &clk_xtal)
+ source = S3C2410_MISCCR_CLK0_MPLL;
+ else if (parent == &clk_upll)
+ source = S3C2410_MISCCR_CLK0_UPLL;
+ else if (parent == &clk_f)
+ source = S3C2410_MISCCR_CLK0_FCLK;
+ else if (parent == &clk_h)
+ source = S3C2410_MISCCR_CLK0_HCLK;
+ else if (parent == &clk_p)
+ source = S3C2410_MISCCR_CLK0_PCLK;
+ else if (clk == &s3c24xx_clkout0 && parent == &s3c24xx_dclk0)
+ source = S3C2410_MISCCR_CLK0_DCLK0;
+ else if (clk == &s3c24xx_clkout1 && parent == &s3c24xx_dclk1)
+ source = S3C2410_MISCCR_CLK0_DCLK0;
+ else
+ return -EINVAL;
+
+ clk->parent = parent;
+
+ if (clk == &s3c24xx_dclk0)
+ mask = S3C2410_MISCCR_CLK0_MASK;
+ else {
+ source <<= 4;
+ mask = S3C2410_MISCCR_CLK1_MASK;
+ }
+
+ s3c2410_modify_misccr(mask, source);
+ return 0;
+}
+
+/* external clock definitions */
+
+struct clk s3c24xx_dclk0 = {
+ .name = "dclk0",
+ .id = -1,
+ .ctrlbit = S3C2410_DCLKCON_DCLK0EN,
+ .enable = s3c24xx_dclk_enable,
+ .set_parent = s3c24xx_dclk_setparent,
+};
+
+struct clk s3c24xx_dclk1 = {
+ .name = "dclk1",
+ .id = -1,
+ .ctrlbit = S3C2410_DCLKCON_DCLK0EN,
+ .enable = s3c24xx_dclk_enable,
+ .set_parent = s3c24xx_dclk_setparent,
+};
+
+struct clk s3c24xx_clkout0 = {
+ .name = "clkout0",
+ .id = -1,
+ .set_parent = s3c24xx_clkout_setparent,
+};
+
+struct clk s3c24xx_clkout1 = {
+ .name = "clkout1",
+ .id = -1,
+ .set_parent = s3c24xx_clkout_setparent,
+};
+
+struct clk s3c24xx_uclk = {
+ .name = "uclk",
+ .id = -1,
+};
+
+/* initialise the clock system */
+
+int s3c24xx_register_clock(struct clk *clk)
+{
+ clk->owner = THIS_MODULE;
+
+ if (clk->enable == NULL)
+ clk->enable = clk_null_enable;
+
+ /* add to the list of available clocks */
+
+ mutex_lock(&clocks_mutex);
+ list_add(&clk->list, &clocks);
+ mutex_unlock(&clocks_mutex);
+
+ return 0;
+}
+
+/* initalise all the clocks */
+
+int __init s3c24xx_setup_clocks(unsigned long xtal,
+ unsigned long fclk,
+ unsigned long hclk,
+ unsigned long pclk)
+{
+ printk(KERN_INFO "S3C24XX Clocks, (c) 2004 Simtec Electronics\n");
+
+ /* initialise the main system clocks */
+
+ clk_xtal.rate = xtal;
+ clk_upll.rate = s3c2410_get_pll(__raw_readl(S3C2410_UPLLCON), xtal);
+
+ clk_mpll.rate = fclk;
+ clk_h.rate = hclk;
+ clk_p.rate = pclk;
+ clk_f.rate = fclk;
+
+ /* assume uart clocks are correctly setup */
+
+ /* register our clocks */
+
+ if (s3c24xx_register_clock(&clk_xtal) < 0)
+ printk(KERN_ERR "failed to register master xtal\n");
+
+ if (s3c24xx_register_clock(&clk_mpll) < 0)
+ printk(KERN_ERR "failed to register mpll clock\n");
+
+ if (s3c24xx_register_clock(&clk_upll) < 0)
+ printk(KERN_ERR "failed to register upll clock\n");
+
+ if (s3c24xx_register_clock(&clk_f) < 0)
+ printk(KERN_ERR "failed to register cpu fclk\n");
+
+ if (s3c24xx_register_clock(&clk_h) < 0)
+ printk(KERN_ERR "failed to register cpu hclk\n");
+
+ if (s3c24xx_register_clock(&clk_p) < 0)
+ printk(KERN_ERR "failed to register cpu pclk\n");
+
+ return 0;
+}
diff --git a/arch/arm/mach-s3c2410/common-smdk.c b/arch/arm/plat-s3c24xx/common-smdk.c
similarity index 96%
rename from arch/arm/mach-s3c2410/common-smdk.c
rename to arch/arm/plat-s3c24xx/common-smdk.c
index a40eaa6..908efa7 100644
--- a/arch/arm/mach-s3c2410/common-smdk.c
+++ b/arch/arm/plat-s3c24xx/common-smdk.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c2410/common-smdk.c
+/* linux/arch/arm/plat-s3c24xx/common-smdk.c
*
* Copyright (c) 2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
@@ -38,9 +38,9 @@
#include <asm/arch/nand.h>
-#include "common-smdk.h"
-#include "devs.h"
-#include "pm.h"
+#include <asm/plat-s3c24xx/common-smdk.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/pm.h>
/* LED devices */
diff --git a/arch/arm/mach-s3c2410/cpu.c b/arch/arm/plat-s3c24xx/cpu.c
similarity index 92%
rename from arch/arm/mach-s3c2410/cpu.c
rename to arch/arm/plat-s3c24xx/cpu.c
index ae1f5bb..6a2d107 100644
--- a/arch/arm/mach-s3c2410/cpu.c
+++ b/arch/arm/plat-s3c24xx/cpu.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c2410/cpu.c
+/* linux/arch/arm/plat-s3c24xx/cpu.c
*
* Copyright (c) 2004-2005 Simtec Electronics
* http://www.simtec.co.uk/products/SWLINUX/
@@ -40,15 +40,16 @@
#include <asm/arch/regs-gpio.h>
#include <asm/arch/regs-serial.h>
-#include "cpu.h"
-#include "devs.h"
-#include "clock.h"
-#include "s3c2400.h"
-#include "s3c2410.h"
-#include "s3c2412.h"
+#include <asm/plat-s3c24xx/cpu.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/s3c2400.h>
+#include <asm/plat-s3c24xx/s3c2410.h>
+#include <asm/plat-s3c24xx/s3c2412.h>
#include "s3c244x.h"
-#include "s3c2440.h"
-#include "s3c2442.h"
+#include <asm/plat-s3c24xx/s3c2440.h>
+#include <asm/plat-s3c24xx/s3c2442.h>
+#include <asm/plat-s3c24xx/s3c2443.h>
struct cpu_table {
unsigned long idcode;
@@ -67,6 +68,7 @@
static const char name_s3c2412[] = "S3C2412";
static const char name_s3c2440[] = "S3C2440";
static const char name_s3c2442[] = "S3C2442";
+static const char name_s3c2443[] = "S3C2443";
static const char name_s3c2410a[] = "S3C2410A";
static const char name_s3c2440a[] = "S3C2440A";
@@ -135,6 +137,15 @@
.name = name_s3c2412,
},
{
+ .idcode = 0x32443001,
+ .idmask = 0xffffffff,
+ .map_io = s3c2443_map_io,
+ .init_clocks = s3c2443_init_clocks,
+ .init_uarts = s3c2443_init_uarts,
+ .init = s3c2443_init,
+ .name = name_s3c2443,
+ },
+ {
.idcode = 0x0, /* S3C2400 doesn't have an idcode */
.idmask = 0xffffffff,
.map_io = s3c2400_map_io,
diff --git a/arch/arm/mach-s3c2410/devs.c b/arch/arm/plat-s3c24xx/devs.c
similarity index 95%
rename from arch/arm/mach-s3c2410/devs.c
rename to arch/arm/plat-s3c24xx/devs.c
index faccde2..0fe53b3 100644
--- a/arch/arm/mach-s3c2410/devs.c
+++ b/arch/arm/plat-s3c24xx/devs.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c2410/devs.c
+/* linux/arch/arm/plat-s3c24xx/devs.c
*
* Copyright (c) 2004 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
@@ -29,9 +29,10 @@
#include <asm/irq.h>
#include <asm/arch/regs-serial.h>
+#include <asm/arch/udc.h>
-#include "devs.h"
-#include "cpu.h"
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
/* Serial port registrations */
@@ -230,6 +231,20 @@
EXPORT_SYMBOL(s3c_device_usbgadget);
+void __init s3c24xx_udc_set_platdata(struct s3c2410_udc_mach_info *pd)
+{
+ struct s3c2410_udc_mach_info *npd;
+
+ npd = kmalloc(sizeof(*npd), GFP_KERNEL);
+ if (npd) {
+ memcpy(npd, pd, sizeof(*npd));
+ s3c_device_usbgadget.dev.platform_data = npd;
+ } else {
+ printk(KERN_ERR "no memory for udc platform data\n");
+ }
+}
+
+
/* Watchdog */
static struct resource s3c_wdt_resource[] = {
diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c
new file mode 100644
index 0000000..4540a80
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/dma.c
@@ -0,0 +1,1499 @@
+/* linux/arch/arm/plat-s3c24xx/dma.c
+ *
+ * Copyright (c) 2003-2005,2006 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 DMA core
+ *
+ * http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+
+#ifdef CONFIG_S3C2410_DMA_DEBUG
+#define DEBUG
+#endif
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/sysdev.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+
+#include <asm/system.h>
+#include <asm/irq.h>
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/dma.h>
+
+#include <asm/mach/dma.h>
+#include <asm/arch/map.h>
+
+#include <asm/plat-s3c24xx/dma.h>
+
+/* io map for dma */
+static void __iomem *dma_base;
+static struct kmem_cache *dma_kmem;
+
+static int dma_channels;
+
+struct s3c24xx_dma_selection dma_sel;
+
+/* dma channel state information */
+struct s3c2410_dma_chan s3c2410_chans[S3C2410_DMA_CHANNELS];
+
+/* debugging functions */
+
+#define BUF_MAGIC (0xcafebabe)
+
+#define dmawarn(fmt...) printk(KERN_DEBUG fmt)
+
+#define dma_regaddr(chan, reg) ((chan)->regs + (reg))
+
+#if 1
+#define dma_wrreg(chan, reg, val) writel((val), (chan)->regs + (reg))
+#else
+static inline void
+dma_wrreg(struct s3c2410_dma_chan *chan, int reg, unsigned long val)
+{
+ pr_debug("writing %08x to register %08x\n",(unsigned int)val,reg);
+ writel(val, dma_regaddr(chan, reg));
+}
+#endif
+
+#define dma_rdreg(chan, reg) readl((chan)->regs + (reg))
+
+/* captured register state for debug */
+
+struct s3c2410_dma_regstate {
+ unsigned long dcsrc;
+ unsigned long disrc;
+ unsigned long dstat;
+ unsigned long dcon;
+ unsigned long dmsktrig;
+};
+
+#ifdef CONFIG_S3C2410_DMA_DEBUG
+
+/* dmadbg_showregs
+ *
+ * simple debug routine to print the current state of the dma registers
+*/
+
+static void
+dmadbg_capture(struct s3c2410_dma_chan *chan, struct s3c2410_dma_regstate *regs)
+{
+ regs->dcsrc = dma_rdreg(chan, S3C2410_DMA_DCSRC);
+ regs->disrc = dma_rdreg(chan, S3C2410_DMA_DISRC);
+ regs->dstat = dma_rdreg(chan, S3C2410_DMA_DSTAT);
+ regs->dcon = dma_rdreg(chan, S3C2410_DMA_DCON);
+ regs->dmsktrig = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG);
+}
+
+static void
+dmadbg_dumpregs(const char *fname, int line, struct s3c2410_dma_chan *chan,
+ struct s3c2410_dma_regstate *regs)
+{
+ printk(KERN_DEBUG "dma%d: %s:%d: DCSRC=%08lx, DISRC=%08lx, DSTAT=%08lx DMT=%02lx, DCON=%08lx\n",
+ chan->number, fname, line,
+ regs->dcsrc, regs->disrc, regs->dstat, regs->dmsktrig,
+ regs->dcon);
+}
+
+static void
+dmadbg_showchan(const char *fname, int line, struct s3c2410_dma_chan *chan)
+{
+ struct s3c2410_dma_regstate state;
+
+ dmadbg_capture(chan, &state);
+
+ printk(KERN_DEBUG "dma%d: %s:%d: ls=%d, cur=%p, %p %p\n",
+ chan->number, fname, line, chan->load_state,
+ chan->curr, chan->next, chan->end);
+
+ dmadbg_dumpregs(fname, line, chan, &state);
+}
+
+static void
+dmadbg_showregs(const char *fname, int line, struct s3c2410_dma_chan *chan)
+{
+ struct s3c2410_dma_regstate state;
+
+ dmadbg_capture(chan, &state);
+ dmadbg_dumpregs(fname, line, chan, &state);
+}
+
+#define dbg_showregs(chan) dmadbg_showregs(__FUNCTION__, __LINE__, (chan))
+#define dbg_showchan(chan) dmadbg_showchan(__FUNCTION__, __LINE__, (chan))
+#else
+#define dbg_showregs(chan) do { } while(0)
+#define dbg_showchan(chan) do { } while(0)
+#endif /* CONFIG_S3C2410_DMA_DEBUG */
+
+static struct s3c2410_dma_chan *dma_chan_map[DMACH_MAX];
+
+/* lookup_dma_channel
+ *
+ * change the dma channel number given into a real dma channel id
+*/
+
+static struct s3c2410_dma_chan *lookup_dma_channel(unsigned int channel)
+{
+ if (channel & DMACH_LOW_LEVEL)
+ return &s3c2410_chans[channel & ~DMACH_LOW_LEVEL];
+ else
+ return dma_chan_map[channel];
+}
+
+/* s3c2410_dma_stats_timeout
+ *
+ * Update DMA stats from timeout info
+*/
+
+static void
+s3c2410_dma_stats_timeout(struct s3c2410_dma_stats *stats, int val)
+{
+ if (stats == NULL)
+ return;
+
+ if (val > stats->timeout_longest)
+ stats->timeout_longest = val;
+ if (val < stats->timeout_shortest)
+ stats->timeout_shortest = val;
+
+ stats->timeout_avg += val;
+}
+
+/* s3c2410_dma_waitforload
+ *
+ * wait for the DMA engine to load a buffer, and update the state accordingly
+*/
+
+static int
+s3c2410_dma_waitforload(struct s3c2410_dma_chan *chan, int line)
+{
+ int timeout = chan->load_timeout;
+ int took;
+
+ if (chan->load_state != S3C2410_DMALOAD_1LOADED) {
+ printk(KERN_ERR "dma%d: s3c2410_dma_waitforload() called in loadstate %d from line %d\n", chan->number, chan->load_state, line);
+ return 0;
+ }
+
+ if (chan->stats != NULL)
+ chan->stats->loads++;
+
+ while (--timeout > 0) {
+ if ((dma_rdreg(chan, S3C2410_DMA_DSTAT) << (32-20)) != 0) {
+ took = chan->load_timeout - timeout;
+
+ s3c2410_dma_stats_timeout(chan->stats, took);
+
+ switch (chan->load_state) {
+ case S3C2410_DMALOAD_1LOADED:
+ chan->load_state = S3C2410_DMALOAD_1RUNNING;
+ break;
+
+ default:
+ printk(KERN_ERR "dma%d: unknown load_state in s3c2410_dma_waitforload() %d\n", chan->number, chan->load_state);
+ }
+
+ return 1;
+ }
+ }
+
+ if (chan->stats != NULL) {
+ chan->stats->timeout_failed++;
+ }
+
+ return 0;
+}
+
+
+
+/* s3c2410_dma_loadbuffer
+ *
+ * load a buffer, and update the channel state
+*/
+
+static inline int
+s3c2410_dma_loadbuffer(struct s3c2410_dma_chan *chan,
+ struct s3c2410_dma_buf *buf)
+{
+ unsigned long reload;
+
+ pr_debug("s3c2410_chan_loadbuffer: loading buff %p (0x%08lx,0x%06x)\n",
+ buf, (unsigned long)buf->data, buf->size);
+
+ if (buf == NULL) {
+ dmawarn("buffer is NULL\n");
+ return -EINVAL;
+ }
+
+ /* check the state of the channel before we do anything */
+
+ if (chan->load_state == S3C2410_DMALOAD_1LOADED) {
+ dmawarn("load_state is S3C2410_DMALOAD_1LOADED\n");
+ }
+
+ if (chan->load_state == S3C2410_DMALOAD_1LOADED_1RUNNING) {
+ dmawarn("state is S3C2410_DMALOAD_1LOADED_1RUNNING\n");
+ }
+
+ /* it would seem sensible if we are the last buffer to not bother
+ * with the auto-reload bit, so that the DMA engine will not try
+ * and load another transfer after this one has finished...
+ */
+ if (chan->load_state == S3C2410_DMALOAD_NONE) {
+ pr_debug("load_state is none, checking for noreload (next=%p)\n",
+ buf->next);
+ reload = (buf->next == NULL) ? S3C2410_DCON_NORELOAD : 0;
+ } else {
+ //pr_debug("load_state is %d => autoreload\n", chan->load_state);
+ reload = S3C2410_DCON_AUTORELOAD;
+ }
+
+ if ((buf->data & 0xf0000000) != 0x30000000) {
+ dmawarn("dmaload: buffer is %p\n", (void *)buf->data);
+ }
+
+ writel(buf->data, chan->addr_reg);
+
+ dma_wrreg(chan, S3C2410_DMA_DCON,
+ chan->dcon | reload | (buf->size/chan->xfer_unit));
+
+ chan->next = buf->next;
+
+ /* update the state of the channel */
+
+ switch (chan->load_state) {
+ case S3C2410_DMALOAD_NONE:
+ chan->load_state = S3C2410_DMALOAD_1LOADED;
+ break;
+
+ case S3C2410_DMALOAD_1RUNNING:
+ chan->load_state = S3C2410_DMALOAD_1LOADED_1RUNNING;
+ break;
+
+ default:
+ dmawarn("dmaload: unknown state %d in loadbuffer\n",
+ chan->load_state);
+ break;
+ }
+
+ return 0;
+}
+
+/* s3c2410_dma_call_op
+ *
+ * small routine to call the op routine with the given op if it has been
+ * registered
+*/
+
+static void
+s3c2410_dma_call_op(struct s3c2410_dma_chan *chan, enum s3c2410_chan_op op)
+{
+ if (chan->op_fn != NULL) {
+ (chan->op_fn)(chan, op);
+ }
+}
+
+/* s3c2410_dma_buffdone
+ *
+ * small wrapper to check if callback routine needs to be called, and
+ * if so, call it
+*/
+
+static inline void
+s3c2410_dma_buffdone(struct s3c2410_dma_chan *chan, struct s3c2410_dma_buf *buf,
+ enum s3c2410_dma_buffresult result)
+{
+#if 0
+ pr_debug("callback_fn=%p, buf=%p, id=%p, size=%d, result=%d\n",
+ chan->callback_fn, buf, buf->id, buf->size, result);
+#endif
+
+ if (chan->callback_fn != NULL) {
+ (chan->callback_fn)(chan, buf->id, buf->size, result);
+ }
+}
+
+/* s3c2410_dma_start
+ *
+ * start a dma channel going
+*/
+
+static int s3c2410_dma_start(struct s3c2410_dma_chan *chan)
+{
+ unsigned long tmp;
+ unsigned long flags;
+
+ pr_debug("s3c2410_start_dma: channel=%d\n", chan->number);
+
+ local_irq_save(flags);
+
+ if (chan->state == S3C2410_DMA_RUNNING) {
+ pr_debug("s3c2410_start_dma: already running (%d)\n", chan->state);
+ local_irq_restore(flags);
+ return 0;
+ }
+
+ chan->state = S3C2410_DMA_RUNNING;
+
+ /* check wether there is anything to load, and if not, see
+ * if we can find anything to load
+ */
+
+ if (chan->load_state == S3C2410_DMALOAD_NONE) {
+ if (chan->next == NULL) {
+ printk(KERN_ERR "dma%d: channel has nothing loaded\n",
+ chan->number);
+ chan->state = S3C2410_DMA_IDLE;
+ local_irq_restore(flags);
+ return -EINVAL;
+ }
+
+ s3c2410_dma_loadbuffer(chan, chan->next);
+ }
+
+ dbg_showchan(chan);
+
+ /* enable the channel */
+
+ if (!chan->irq_enabled) {
+ enable_irq(chan->irq);
+ chan->irq_enabled = 1;
+ }
+
+ /* start the channel going */
+
+ tmp = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG);
+ tmp &= ~S3C2410_DMASKTRIG_STOP;
+ tmp |= S3C2410_DMASKTRIG_ON;
+ dma_wrreg(chan, S3C2410_DMA_DMASKTRIG, tmp);
+
+ pr_debug("dma%d: %08lx to DMASKTRIG\n", chan->number, tmp);
+
+#if 0
+ /* the dma buffer loads should take care of clearing the AUTO
+ * reloading feature */
+ tmp = dma_rdreg(chan, S3C2410_DMA_DCON);
+ tmp &= ~S3C2410_DCON_NORELOAD;
+ dma_wrreg(chan, S3C2410_DMA_DCON, tmp);
+#endif
+
+ s3c2410_dma_call_op(chan, S3C2410_DMAOP_START);
+
+ dbg_showchan(chan);
+
+ /* if we've only loaded one buffer onto the channel, then chec
+ * to see if we have another, and if so, try and load it so when
+ * the first buffer is finished, the new one will be loaded onto
+ * the channel */
+
+ if (chan->next != NULL) {
+ if (chan->load_state == S3C2410_DMALOAD_1LOADED) {
+
+ if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
+ pr_debug("%s: buff not yet loaded, no more todo\n",
+ __FUNCTION__);
+ } else {
+ chan->load_state = S3C2410_DMALOAD_1RUNNING;
+ s3c2410_dma_loadbuffer(chan, chan->next);
+ }
+
+ } else if (chan->load_state == S3C2410_DMALOAD_1RUNNING) {
+ s3c2410_dma_loadbuffer(chan, chan->next);
+ }
+ }
+
+
+ local_irq_restore(flags);
+
+ return 0;
+}
+
+/* s3c2410_dma_canload
+ *
+ * work out if we can queue another buffer into the DMA engine
+*/
+
+static int
+s3c2410_dma_canload(struct s3c2410_dma_chan *chan)
+{
+ if (chan->load_state == S3C2410_DMALOAD_NONE ||
+ chan->load_state == S3C2410_DMALOAD_1RUNNING)
+ return 1;
+
+ return 0;
+}
+
+/* s3c2410_dma_enqueue
+ *
+ * queue an given buffer for dma transfer.
+ *
+ * id the device driver's id information for this buffer
+ * data the physical address of the buffer data
+ * size the size of the buffer in bytes
+ *
+ * If the channel is not running, then the flag S3C2410_DMAF_AUTOSTART
+ * is checked, and if set, the channel is started. If this flag isn't set,
+ * then an error will be returned.
+ *
+ * It is possible to queue more than one DMA buffer onto a channel at
+ * once, and the code will deal with the re-loading of the next buffer
+ * when necessary.
+*/
+
+int s3c2410_dma_enqueue(unsigned int channel, void *id,
+ dma_addr_t data, int size)
+{
+ struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
+ struct s3c2410_dma_buf *buf;
+ unsigned long flags;
+
+ if (chan == NULL)
+ return -EINVAL;
+
+ pr_debug("%s: id=%p, data=%08x, size=%d\n",
+ __FUNCTION__, id, (unsigned int)data, size);
+
+ buf = kmem_cache_alloc(dma_kmem, GFP_ATOMIC);
+ if (buf == NULL) {
+ pr_debug("%s: out of memory (%ld alloc)\n",
+ __FUNCTION__, (long)sizeof(*buf));
+ return -ENOMEM;
+ }
+
+ //pr_debug("%s: new buffer %p\n", __FUNCTION__, buf);
+ //dbg_showchan(chan);
+
+ buf->next = NULL;
+ buf->data = buf->ptr = data;
+ buf->size = size;
+ buf->id = id;
+ buf->magic = BUF_MAGIC;
+
+ local_irq_save(flags);
+
+ if (chan->curr == NULL) {
+ /* we've got nothing loaded... */
+ pr_debug("%s: buffer %p queued onto empty channel\n",
+ __FUNCTION__, buf);
+
+ chan->curr = buf;
+ chan->end = buf;
+ chan->next = NULL;
+ } else {
+ pr_debug("dma%d: %s: buffer %p queued onto non-empty channel\n",
+ chan->number, __FUNCTION__, buf);
+
+ if (chan->end == NULL)
+ pr_debug("dma%d: %s: %p not empty, and chan->end==NULL?\n",
+ chan->number, __FUNCTION__, chan);
+
+ chan->end->next = buf;
+ chan->end = buf;
+ }
+
+ /* if necessary, update the next buffer field */
+ if (chan->next == NULL)
+ chan->next = buf;
+
+ /* check to see if we can load a buffer */
+ if (chan->state == S3C2410_DMA_RUNNING) {
+ if (chan->load_state == S3C2410_DMALOAD_1LOADED && 1) {
+ if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
+ printk(KERN_ERR "dma%d: loadbuffer:"
+ "timeout loading buffer\n",
+ chan->number);
+ dbg_showchan(chan);
+ local_irq_restore(flags);
+ return -EINVAL;
+ }
+ }
+
+ while (s3c2410_dma_canload(chan) && chan->next != NULL) {
+ s3c2410_dma_loadbuffer(chan, chan->next);
+ }
+ } else if (chan->state == S3C2410_DMA_IDLE) {
+ if (chan->flags & S3C2410_DMAF_AUTOSTART) {
+ s3c2410_dma_ctrl(chan->number, S3C2410_DMAOP_START);
+ }
+ }
+
+ local_irq_restore(flags);
+ return 0;
+}
+
+EXPORT_SYMBOL(s3c2410_dma_enqueue);
+
+static inline void
+s3c2410_dma_freebuf(struct s3c2410_dma_buf *buf)
+{
+ int magicok = (buf->magic == BUF_MAGIC);
+
+ buf->magic = -1;
+
+ if (magicok) {
+ kmem_cache_free(dma_kmem, buf);
+ } else {
+ printk("s3c2410_dma_freebuf: buff %p with bad magic\n", buf);
+ }
+}
+
+/* s3c2410_dma_lastxfer
+ *
+ * called when the system is out of buffers, to ensure that the channel
+ * is prepared for shutdown.
+*/
+
+static inline void
+s3c2410_dma_lastxfer(struct s3c2410_dma_chan *chan)
+{
+#if 0
+ pr_debug("dma%d: s3c2410_dma_lastxfer: load_state %d\n",
+ chan->number, chan->load_state);
+#endif
+
+ switch (chan->load_state) {
+ case S3C2410_DMALOAD_NONE:
+ break;
+
+ case S3C2410_DMALOAD_1LOADED:
+ if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
+ /* flag error? */
+ printk(KERN_ERR "dma%d: timeout waiting for load (%s)\n",
+ chan->number, __FUNCTION__);
+ return;
+ }
+ break;
+
+ case S3C2410_DMALOAD_1LOADED_1RUNNING:
+ /* I belive in this case we do not have anything to do
+ * until the next buffer comes along, and we turn off the
+ * reload */
+ return;
+
+ default:
+ pr_debug("dma%d: lastxfer: unhandled load_state %d with no next\n",
+ chan->number, chan->load_state);
+ return;
+
+ }
+
+ /* hopefully this'll shut the damned thing up after the transfer... */
+ dma_wrreg(chan, S3C2410_DMA_DCON, chan->dcon | S3C2410_DCON_NORELOAD);
+}
+
+
+#define dmadbg2(x...)
+
+static irqreturn_t
+s3c2410_dma_irq(int irq, void *devpw)
+{
+ struct s3c2410_dma_chan *chan = (struct s3c2410_dma_chan *)devpw;
+ struct s3c2410_dma_buf *buf;
+
+ buf = chan->curr;
+
+ dbg_showchan(chan);
+
+ /* modify the channel state */
+
+ switch (chan->load_state) {
+ case S3C2410_DMALOAD_1RUNNING:
+ /* TODO - if we are running only one buffer, we probably
+ * want to reload here, and then worry about the buffer
+ * callback */
+
+ chan->load_state = S3C2410_DMALOAD_NONE;
+ break;
+
+ case S3C2410_DMALOAD_1LOADED:
+ /* iirc, we should go back to NONE loaded here, we
+ * had a buffer, and it was never verified as being
+ * loaded.
+ */
+
+ chan->load_state = S3C2410_DMALOAD_NONE;
+ break;
+
+ case S3C2410_DMALOAD_1LOADED_1RUNNING:
+ /* we'll worry about checking to see if another buffer is
+ * ready after we've called back the owner. This should
+ * ensure we do not wait around too long for the DMA
+ * engine to start the next transfer
+ */
+
+ chan->load_state = S3C2410_DMALOAD_1LOADED;
+ break;
+
+ case S3C2410_DMALOAD_NONE:
+ printk(KERN_ERR "dma%d: IRQ with no loaded buffer?\n",
+ chan->number);
+ break;
+
+ default:
+ printk(KERN_ERR "dma%d: IRQ in invalid load_state %d\n",
+ chan->number, chan->load_state);
+ break;
+ }
+
+ if (buf != NULL) {
+ /* update the chain to make sure that if we load any more
+ * buffers when we call the callback function, things should
+ * work properly */
+
+ chan->curr = buf->next;
+ buf->next = NULL;
+
+ if (buf->magic != BUF_MAGIC) {
+ printk(KERN_ERR "dma%d: %s: buf %p incorrect magic\n",
+ chan->number, __FUNCTION__, buf);
+ return IRQ_HANDLED;
+ }
+
+ s3c2410_dma_buffdone(chan, buf, S3C2410_RES_OK);
+
+ /* free resouces */
+ s3c2410_dma_freebuf(buf);
+ } else {
+ }
+
+ /* only reload if the channel is still running... our buffer done
+ * routine may have altered the state by requesting the dma channel
+ * to stop or shutdown... */
+
+ /* todo: check that when the channel is shut-down from inside this
+ * function, we cope with unsetting reload, etc */
+
+ if (chan->next != NULL && chan->state != S3C2410_DMA_IDLE) {
+ unsigned long flags;
+
+ switch (chan->load_state) {
+ case S3C2410_DMALOAD_1RUNNING:
+ /* don't need to do anything for this state */
+ break;
+
+ case S3C2410_DMALOAD_NONE:
+ /* can load buffer immediately */
+ break;
+
+ case S3C2410_DMALOAD_1LOADED:
+ if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
+ /* flag error? */
+ printk(KERN_ERR "dma%d: timeout waiting for load (%s)\n",
+ chan->number, __FUNCTION__);
+ return IRQ_HANDLED;
+ }
+
+ break;
+
+ case S3C2410_DMALOAD_1LOADED_1RUNNING:
+ goto no_load;
+
+ default:
+ printk(KERN_ERR "dma%d: unknown load_state in irq, %d\n",
+ chan->number, chan->load_state);
+ return IRQ_HANDLED;
+ }
+
+ local_irq_save(flags);
+ s3c2410_dma_loadbuffer(chan, chan->next);
+ local_irq_restore(flags);
+ } else {
+ s3c2410_dma_lastxfer(chan);
+
+ /* see if we can stop this channel.. */
+ if (chan->load_state == S3C2410_DMALOAD_NONE) {
+ pr_debug("dma%d: end of transfer, stopping channel (%ld)\n",
+ chan->number, jiffies);
+ s3c2410_dma_ctrl(chan->number | DMACH_LOW_LEVEL,
+ S3C2410_DMAOP_STOP);
+ }
+ }
+
+ no_load:
+ return IRQ_HANDLED;
+}
+
+static struct s3c2410_dma_chan *s3c2410_dma_map_channel(int channel);
+
+/* s3c2410_request_dma
+ *
+ * get control of an dma channel
+*/
+
+int s3c2410_dma_request(unsigned int channel,
+ struct s3c2410_dma_client *client,
+ void *dev)
+{
+ struct s3c2410_dma_chan *chan;
+ unsigned long flags;
+ int err;
+
+ pr_debug("dma%d: s3c2410_request_dma: client=%s, dev=%p\n",
+ channel, client->name, dev);
+
+ local_irq_save(flags);
+
+ chan = s3c2410_dma_map_channel(channel);
+ if (chan == NULL) {
+ local_irq_restore(flags);
+ return -EBUSY;
+ }
+
+ dbg_showchan(chan);
+
+ chan->client = client;
+ chan->in_use = 1;
+
+ if (!chan->irq_claimed) {
+ pr_debug("dma%d: %s : requesting irq %d\n",
+ channel, __FUNCTION__, chan->irq);
+
+ chan->irq_claimed = 1;
+ local_irq_restore(flags);
+
+ err = request_irq(chan->irq, s3c2410_dma_irq, IRQF_DISABLED,
+ client->name, (void *)chan);
+
+ local_irq_save(flags);
+
+ if (err) {
+ chan->in_use = 0;
+ chan->irq_claimed = 0;
+ local_irq_restore(flags);
+
+ printk(KERN_ERR "%s: cannot get IRQ %d for DMA %d\n",
+ client->name, chan->irq, chan->number);
+ return err;
+ }
+
+ chan->irq_enabled = 1;
+ }
+
+ local_irq_restore(flags);
+
+ /* need to setup */
+
+ pr_debug("%s: channel initialised, %p\n", __FUNCTION__, chan);
+
+ return 0;
+}
+
+EXPORT_SYMBOL(s3c2410_dma_request);
+
+/* s3c2410_dma_free
+ *
+ * release the given channel back to the system, will stop and flush
+ * any outstanding transfers, and ensure the channel is ready for the
+ * next claimant.
+ *
+ * Note, although a warning is currently printed if the freeing client
+ * info is not the same as the registrant's client info, the free is still
+ * allowed to go through.
+*/
+
+int s3c2410_dma_free(dmach_t channel, struct s3c2410_dma_client *client)
+{
+ struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
+ unsigned long flags;
+
+ if (chan == NULL)
+ return -EINVAL;
+
+ local_irq_save(flags);
+
+ if (chan->client != client) {
+ printk(KERN_WARNING "dma%d: possible free from different client (channel %p, passed %p)\n",
+ channel, chan->client, client);
+ }
+
+ /* sort out stopping and freeing the channel */
+
+ if (chan->state != S3C2410_DMA_IDLE) {
+ pr_debug("%s: need to stop dma channel %p\n",
+ __FUNCTION__, chan);
+
+ /* possibly flush the channel */
+ s3c2410_dma_ctrl(channel, S3C2410_DMAOP_STOP);
+ }
+
+ chan->client = NULL;
+ chan->in_use = 0;
+
+ if (chan->irq_claimed)
+ free_irq(chan->irq, (void *)chan);
+
+ chan->irq_claimed = 0;
+
+ if (!(channel & DMACH_LOW_LEVEL))
+ dma_chan_map[channel] = NULL;
+
+ local_irq_restore(flags);
+
+ return 0;
+}
+
+EXPORT_SYMBOL(s3c2410_dma_free);
+
+static int s3c2410_dma_dostop(struct s3c2410_dma_chan *chan)
+{
+ unsigned long flags;
+ unsigned long tmp;
+
+ pr_debug("%s:\n", __FUNCTION__);
+
+ dbg_showchan(chan);
+
+ local_irq_save(flags);
+
+ s3c2410_dma_call_op(chan, S3C2410_DMAOP_STOP);
+
+ tmp = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG);
+ tmp |= S3C2410_DMASKTRIG_STOP;
+ //tmp &= ~S3C2410_DMASKTRIG_ON;
+ dma_wrreg(chan, S3C2410_DMA_DMASKTRIG, tmp);
+
+#if 0
+ /* should also clear interrupts, according to WinCE BSP */
+ tmp = dma_rdreg(chan, S3C2410_DMA_DCON);
+ tmp |= S3C2410_DCON_NORELOAD;
+ dma_wrreg(chan, S3C2410_DMA_DCON, tmp);
+#endif
+
+ /* should stop do this, or should we wait for flush? */
+ chan->state = S3C2410_DMA_IDLE;
+ chan->load_state = S3C2410_DMALOAD_NONE;
+
+ local_irq_restore(flags);
+
+ return 0;
+}
+
+void s3c2410_dma_waitforstop(struct s3c2410_dma_chan *chan)
+{
+ unsigned long tmp;
+ unsigned int timeout = 0x10000;
+
+ while (timeout-- > 0) {
+ tmp = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG);
+
+ if (!(tmp & S3C2410_DMASKTRIG_ON))
+ return;
+ }
+
+ pr_debug("dma%d: failed to stop?\n", chan->number);
+}
+
+
+/* s3c2410_dma_flush
+ *
+ * stop the channel, and remove all current and pending transfers
+*/
+
+static int s3c2410_dma_flush(struct s3c2410_dma_chan *chan)
+{
+ struct s3c2410_dma_buf *buf, *next;
+ unsigned long flags;
+
+ pr_debug("%s: chan %p (%d)\n", __FUNCTION__, chan, chan->number);
+
+ dbg_showchan(chan);
+
+ local_irq_save(flags);
+
+ if (chan->state != S3C2410_DMA_IDLE) {
+ pr_debug("%s: stopping channel...\n", __FUNCTION__ );
+ s3c2410_dma_ctrl(chan->number, S3C2410_DMAOP_STOP);
+ }
+
+ buf = chan->curr;
+ if (buf == NULL)
+ buf = chan->next;
+
+ chan->curr = chan->next = chan->end = NULL;
+
+ if (buf != NULL) {
+ for ( ; buf != NULL; buf = next) {
+ next = buf->next;
+
+ pr_debug("%s: free buffer %p, next %p\n",
+ __FUNCTION__, buf, buf->next);
+
+ s3c2410_dma_buffdone(chan, buf, S3C2410_RES_ABORT);
+ s3c2410_dma_freebuf(buf);
+ }
+ }
+
+ dbg_showregs(chan);
+
+ s3c2410_dma_waitforstop(chan);
+
+#if 0
+ /* should also clear interrupts, according to WinCE BSP */
+ {
+ unsigned long tmp;
+
+ tmp = dma_rdreg(chan, S3C2410_DMA_DCON);
+ tmp |= S3C2410_DCON_NORELOAD;
+ dma_wrreg(chan, S3C2410_DMA_DCON, tmp);
+ }
+#endif
+
+ dbg_showregs(chan);
+
+ local_irq_restore(flags);
+
+ return 0;
+}
+
+int
+s3c2410_dma_started(struct s3c2410_dma_chan *chan)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+
+ dbg_showchan(chan);
+
+ /* if we've only loaded one buffer onto the channel, then chec
+ * to see if we have another, and if so, try and load it so when
+ * the first buffer is finished, the new one will be loaded onto
+ * the channel */
+
+ if (chan->next != NULL) {
+ if (chan->load_state == S3C2410_DMALOAD_1LOADED) {
+
+ if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
+ pr_debug("%s: buff not yet loaded, no more todo\n",
+ __FUNCTION__);
+ } else {
+ chan->load_state = S3C2410_DMALOAD_1RUNNING;
+ s3c2410_dma_loadbuffer(chan, chan->next);
+ }
+
+ } else if (chan->load_state == S3C2410_DMALOAD_1RUNNING) {
+ s3c2410_dma_loadbuffer(chan, chan->next);
+ }
+ }
+
+
+ local_irq_restore(flags);
+
+ return 0;
+
+}
+
+int
+s3c2410_dma_ctrl(dmach_t channel, enum s3c2410_chan_op op)
+{
+ struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
+
+ if (chan == NULL)
+ return -EINVAL;
+
+ switch (op) {
+ case S3C2410_DMAOP_START:
+ return s3c2410_dma_start(chan);
+
+ case S3C2410_DMAOP_STOP:
+ return s3c2410_dma_dostop(chan);
+
+ case S3C2410_DMAOP_PAUSE:
+ case S3C2410_DMAOP_RESUME:
+ return -ENOENT;
+
+ case S3C2410_DMAOP_FLUSH:
+ return s3c2410_dma_flush(chan);
+
+ case S3C2410_DMAOP_STARTED:
+ return s3c2410_dma_started(chan);
+
+ case S3C2410_DMAOP_TIMEOUT:
+ return 0;
+
+ }
+
+ return -ENOENT; /* unknown, don't bother */
+}
+
+EXPORT_SYMBOL(s3c2410_dma_ctrl);
+
+/* DMA configuration for each channel
+ *
+ * DISRCC -> source of the DMA (AHB,APB)
+ * DISRC -> source address of the DMA
+ * DIDSTC -> destination of the DMA (AHB,APD)
+ * DIDST -> destination address of the DMA
+*/
+
+/* s3c2410_dma_config
+ *
+ * xfersize: size of unit in bytes (1,2,4)
+ * dcon: base value of the DCONx register
+*/
+
+int s3c2410_dma_config(dmach_t channel,
+ int xferunit,
+ int dcon)
+{
+ struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
+
+ pr_debug("%s: chan=%d, xfer_unit=%d, dcon=%08x\n",
+ __FUNCTION__, channel, xferunit, dcon);
+
+ if (chan == NULL)
+ return -EINVAL;
+
+ pr_debug("%s: Initial dcon is %08x\n", __FUNCTION__, dcon);
+
+ dcon |= chan->dcon & dma_sel.dcon_mask;
+
+ pr_debug("%s: New dcon is %08x\n", __FUNCTION__, dcon);
+
+ switch (xferunit) {
+ case 1:
+ dcon |= S3C2410_DCON_BYTE;
+ break;
+
+ case 2:
+ dcon |= S3C2410_DCON_HALFWORD;
+ break;
+
+ case 4:
+ dcon |= S3C2410_DCON_WORD;
+ break;
+
+ default:
+ pr_debug("%s: bad transfer size %d\n", __FUNCTION__, xferunit);
+ return -EINVAL;
+ }
+
+ dcon |= S3C2410_DCON_HWTRIG;
+ dcon |= S3C2410_DCON_INTREQ;
+
+ pr_debug("%s: dcon now %08x\n", __FUNCTION__, dcon);
+
+ chan->dcon = dcon;
+ chan->xfer_unit = xferunit;
+
+ return 0;
+}
+
+EXPORT_SYMBOL(s3c2410_dma_config);
+
+int s3c2410_dma_setflags(dmach_t channel, unsigned int flags)
+{
+ struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
+
+ if (chan == NULL)
+ return -EINVAL;
+
+ pr_debug("%s: chan=%p, flags=%08x\n", __FUNCTION__, chan, flags);
+
+ chan->flags = flags;
+
+ return 0;
+}
+
+EXPORT_SYMBOL(s3c2410_dma_setflags);
+
+
+/* do we need to protect the settings of the fields from
+ * irq?
+*/
+
+int s3c2410_dma_set_opfn(dmach_t channel, s3c2410_dma_opfn_t rtn)
+{
+ struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
+
+ if (chan == NULL)
+ return -EINVAL;
+
+ pr_debug("%s: chan=%p, op rtn=%p\n", __FUNCTION__, chan, rtn);
+
+ chan->op_fn = rtn;
+
+ return 0;
+}
+
+EXPORT_SYMBOL(s3c2410_dma_set_opfn);
+
+int s3c2410_dma_set_buffdone_fn(dmach_t channel, s3c2410_dma_cbfn_t rtn)
+{
+ struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
+
+ if (chan == NULL)
+ return -EINVAL;
+
+ pr_debug("%s: chan=%p, callback rtn=%p\n", __FUNCTION__, chan, rtn);
+
+ chan->callback_fn = rtn;
+
+ return 0;
+}
+
+EXPORT_SYMBOL(s3c2410_dma_set_buffdone_fn);
+
+/* s3c2410_dma_devconfig
+ *
+ * configure the dma source/destination hardware type and address
+ *
+ * source: S3C2410_DMASRC_HW: source is hardware
+ * S3C2410_DMASRC_MEM: source is memory
+ *
+ * hwcfg: the value for xxxSTCn register,
+ * bit 0: 0=increment pointer, 1=leave pointer
+ * bit 1: 0=soucre is AHB, 1=soucre is APB
+ *
+ * devaddr: physical address of the source
+*/
+
+int s3c2410_dma_devconfig(int channel,
+ enum s3c2410_dmasrc source,
+ int hwcfg,
+ unsigned long devaddr)
+{
+ struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
+
+ if (chan == NULL)
+ return -EINVAL;
+
+ pr_debug("%s: source=%d, hwcfg=%08x, devaddr=%08lx\n",
+ __FUNCTION__, (int)source, hwcfg, devaddr);
+
+ chan->source = source;
+ chan->dev_addr = devaddr;
+
+ switch (source) {
+ case S3C2410_DMASRC_HW:
+ /* source is hardware */
+ pr_debug("%s: hw source, devaddr=%08lx, hwcfg=%d\n",
+ __FUNCTION__, devaddr, hwcfg);
+ dma_wrreg(chan, S3C2410_DMA_DISRCC, hwcfg & 3);
+ dma_wrreg(chan, S3C2410_DMA_DISRC, devaddr);
+ dma_wrreg(chan, S3C2410_DMA_DIDSTC, (0<<1) | (0<<0));
+
+ chan->addr_reg = dma_regaddr(chan, S3C2410_DMA_DIDST);
+ return 0;
+
+ case S3C2410_DMASRC_MEM:
+ /* source is memory */
+ pr_debug( "%s: mem source, devaddr=%08lx, hwcfg=%d\n",
+ __FUNCTION__, devaddr, hwcfg);
+ dma_wrreg(chan, S3C2410_DMA_DISRCC, (0<<1) | (0<<0));
+ dma_wrreg(chan, S3C2410_DMA_DIDST, devaddr);
+ dma_wrreg(chan, S3C2410_DMA_DIDSTC, hwcfg & 3);
+
+ chan->addr_reg = dma_regaddr(chan, S3C2410_DMA_DISRC);
+ return 0;
+ }
+
+ printk(KERN_ERR "dma%d: invalid source type (%d)\n", channel, source);
+ return -EINVAL;
+}
+
+EXPORT_SYMBOL(s3c2410_dma_devconfig);
+
+/* s3c2410_dma_getposition
+ *
+ * returns the current transfer points for the dma source and destination
+*/
+
+int s3c2410_dma_getposition(dmach_t channel, dma_addr_t *src, dma_addr_t *dst)
+{
+ struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
+
+ if (chan == NULL)
+ return -EINVAL;
+
+ if (src != NULL)
+ *src = dma_rdreg(chan, S3C2410_DMA_DCSRC);
+
+ if (dst != NULL)
+ *dst = dma_rdreg(chan, S3C2410_DMA_DCDST);
+
+ return 0;
+}
+
+EXPORT_SYMBOL(s3c2410_dma_getposition);
+
+
+/* system device class */
+
+#ifdef CONFIG_PM
+
+static int s3c2410_dma_suspend(struct sys_device *dev, pm_message_t state)
+{
+ struct s3c2410_dma_chan *cp = container_of(dev, struct s3c2410_dma_chan, dev);
+
+ printk(KERN_DEBUG "suspending dma channel %d\n", cp->number);
+
+ if (dma_rdreg(cp, S3C2410_DMA_DMASKTRIG) & S3C2410_DMASKTRIG_ON) {
+ /* the dma channel is still working, which is probably
+ * a bad thing to do over suspend/resume. We stop the
+ * channel and assume that the client is either going to
+ * retry after resume, or that it is broken.
+ */
+
+ printk(KERN_INFO "dma: stopping channel %d due to suspend\n",
+ cp->number);
+
+ s3c2410_dma_dostop(cp);
+ }
+
+ return 0;
+}
+
+static int s3c2410_dma_resume(struct sys_device *dev)
+{
+ return 0;
+}
+
+#else
+#define s3c2410_dma_suspend NULL
+#define s3c2410_dma_resume NULL
+#endif /* CONFIG_PM */
+
+struct sysdev_class dma_sysclass = {
+ set_kset_name("s3c24xx-dma"),
+ .suspend = s3c2410_dma_suspend,
+ .resume = s3c2410_dma_resume,
+};
+
+/* kmem cache implementation */
+
+static void s3c2410_dma_cache_ctor(void *p, struct kmem_cache *c, unsigned long f)
+{
+ memset(p, 0, sizeof(struct s3c2410_dma_buf));
+}
+
+/* initialisation code */
+
+int __init s3c24xx_dma_sysclass_init(void)
+{
+ int ret = sysdev_class_register(&dma_sysclass);
+
+ if (ret != 0)
+ printk(KERN_ERR "dma sysclass registration failed\n");
+
+ return ret;
+}
+
+core_initcall(s3c24xx_dma_sysclass_init);
+
+int __init s3c24xx_dma_sysdev_register(void)
+{
+ struct s3c2410_dma_chan *cp = s3c2410_chans;
+ int channel, ret;
+
+ for (channel = 0; channel < dma_channels; cp++, channel++) {
+ cp->dev.cls = &dma_sysclass;
+ cp->dev.id = channel;
+ ret = sysdev_register(&cp->dev);
+
+ if (ret) {
+ printk(KERN_ERR "error registering dev for dma %d\n",
+ channel);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+late_initcall(s3c24xx_dma_sysdev_register);
+
+int __init s3c24xx_dma_init(unsigned int channels, unsigned int irq,
+ unsigned int stride)
+{
+ struct s3c2410_dma_chan *cp;
+ int channel;
+ int ret;
+
+ printk("S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics\n");
+
+ dma_channels = channels;
+
+ dma_base = ioremap(S3C24XX_PA_DMA, stride * channels);
+ if (dma_base == NULL) {
+ printk(KERN_ERR "dma failed to remap register block\n");
+ return -ENOMEM;
+ }
+
+ dma_kmem = kmem_cache_create("dma_desc",
+ sizeof(struct s3c2410_dma_buf), 0,
+ SLAB_HWCACHE_ALIGN,
+ s3c2410_dma_cache_ctor, NULL);
+
+ if (dma_kmem == NULL) {
+ printk(KERN_ERR "dma failed to make kmem cache\n");
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ for (channel = 0; channel < channels; channel++) {
+ cp = &s3c2410_chans[channel];
+
+ memset(cp, 0, sizeof(struct s3c2410_dma_chan));
+
+ /* dma channel irqs are in order.. */
+ cp->number = channel;
+ cp->irq = channel + irq;
+ cp->regs = dma_base + (channel * stride);
+
+ /* point current stats somewhere */
+ cp->stats = &cp->stats_store;
+ cp->stats_store.timeout_shortest = LONG_MAX;
+
+ /* basic channel configuration */
+
+ cp->load_timeout = 1<<18;
+
+ printk("DMA channel %d at %p, irq %d\n",
+ cp->number, cp->regs, cp->irq);
+ }
+
+ return 0;
+
+ err:
+ kmem_cache_destroy(dma_kmem);
+ iounmap(dma_base);
+ dma_base = NULL;
+ return ret;
+}
+
+int s3c2410_dma_init(void)
+{
+ return s3c24xx_dma_init(4, IRQ_DMA0, 0x40);
+}
+
+static inline int is_channel_valid(unsigned int channel)
+{
+ return (channel & DMA_CH_VALID);
+}
+
+static struct s3c24xx_dma_order *dma_order;
+
+
+/* s3c2410_dma_map_channel()
+ *
+ * turn the virtual channel number into a real, and un-used hardware
+ * channel.
+ *
+ * first, try the dma ordering given to us by either the relevant
+ * dma code, or the board. Then just find the first usable free
+ * channel
+*/
+
+struct s3c2410_dma_chan *s3c2410_dma_map_channel(int channel)
+{
+ struct s3c24xx_dma_order_ch *ord = NULL;
+ struct s3c24xx_dma_map *ch_map;
+ struct s3c2410_dma_chan *dmach;
+ int ch;
+
+ if (dma_sel.map == NULL || channel > dma_sel.map_size)
+ return NULL;
+
+ ch_map = dma_sel.map + channel;
+
+ /* first, try the board mapping */
+
+ if (dma_order) {
+ ord = &dma_order->channels[channel];
+
+ for (ch = 0; ch < dma_channels; ch++) {
+ if (!is_channel_valid(ord->list[ch]))
+ continue;
+
+ if (s3c2410_chans[ord->list[ch]].in_use == 0) {
+ ch = ord->list[ch] & ~DMA_CH_VALID;
+ goto found;
+ }
+ }
+
+ if (ord->flags & DMA_CH_NEVER)
+ return NULL;
+ }
+
+ /* second, search the channel map for first free */
+
+ for (ch = 0; ch < dma_channels; ch++) {
+ if (!is_channel_valid(ch_map->channels[ch]))
+ continue;
+
+ if (s3c2410_chans[ch].in_use == 0) {
+ printk("mapped channel %d to %d\n", channel, ch);
+ break;
+ }
+ }
+
+ if (ch >= dma_channels)
+ return NULL;
+
+ /* update our channel mapping */
+
+ found:
+ dmach = &s3c2410_chans[ch];
+ dma_chan_map[channel] = dmach;
+
+ /* select the channel */
+
+ (dma_sel.select)(dmach, ch_map);
+
+ return dmach;
+}
+
+static int s3c24xx_dma_check_entry(struct s3c24xx_dma_map *map, int ch)
+{
+ return 0;
+}
+
+int __init s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel)
+{
+ struct s3c24xx_dma_map *nmap;
+ size_t map_sz = sizeof(*nmap) * sel->map_size;
+ int ptr;
+
+ nmap = kmalloc(map_sz, GFP_KERNEL);
+ if (nmap == NULL)
+ return -ENOMEM;
+
+ memcpy(nmap, sel->map, map_sz);
+ memcpy(&dma_sel, sel, sizeof(*sel));
+
+ dma_sel.map = nmap;
+
+ for (ptr = 0; ptr < sel->map_size; ptr++)
+ s3c24xx_dma_check_entry(nmap+ptr, ptr);
+
+ return 0;
+}
+
+int __init s3c24xx_dma_order_set(struct s3c24xx_dma_order *ord)
+{
+ struct s3c24xx_dma_order *nord = dma_order;
+
+ if (nord == NULL)
+ nord = kmalloc(sizeof(struct s3c24xx_dma_order), GFP_KERNEL);
+
+ if (nord == NULL) {
+ printk(KERN_ERR "no memory to store dma channel order\n");
+ return -ENOMEM;
+ }
+
+ dma_order = nord;
+ memcpy(nord, ord, sizeof(struct s3c24xx_dma_order));
+ return 0;
+}
diff --git a/arch/arm/plat-s3c24xx/gpio.c b/arch/arm/plat-s3c24xx/gpio.c
new file mode 100644
index 0000000..ec3a09c
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/gpio.c
@@ -0,0 +1,188 @@
+/* linux/arch/arm/plat-s3c24xx/gpio.c
+ *
+ * Copyright (c) 2004-2005 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX GPIO support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+*/
+
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+
+#include <asm/arch/regs-gpio.h>
+
+void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function)
+{
+ void __iomem *base = S3C24XX_GPIO_BASE(pin);
+ unsigned long mask;
+ unsigned long con;
+ unsigned long flags;
+
+ if (pin < S3C2410_GPIO_BANKB) {
+ mask = 1 << S3C2410_GPIO_OFFSET(pin);
+ } else {
+ mask = 3 << S3C2410_GPIO_OFFSET(pin)*2;
+ }
+
+ switch (function) {
+ case S3C2410_GPIO_LEAVE:
+ mask = 0;
+ function = 0;
+ break;
+
+ case S3C2410_GPIO_INPUT:
+ case S3C2410_GPIO_OUTPUT:
+ case S3C2410_GPIO_SFN2:
+ case S3C2410_GPIO_SFN3:
+ if (pin < S3C2410_GPIO_BANKB) {
+ function -= 1;
+ function &= 1;
+ function <<= S3C2410_GPIO_OFFSET(pin);
+ } else {
+ function &= 3;
+ function <<= S3C2410_GPIO_OFFSET(pin)*2;
+ }
+ }
+
+ /* modify the specified register wwith IRQs off */
+
+ local_irq_save(flags);
+
+ con = __raw_readl(base + 0x00);
+ con &= ~mask;
+ con |= function;
+
+ __raw_writel(con, base + 0x00);
+
+ local_irq_restore(flags);
+}
+
+EXPORT_SYMBOL(s3c2410_gpio_cfgpin);
+
+unsigned int s3c2410_gpio_getcfg(unsigned int pin)
+{
+ void __iomem *base = S3C24XX_GPIO_BASE(pin);
+ unsigned long val = __raw_readl(base);
+
+ if (pin < S3C2410_GPIO_BANKB) {
+ val >>= S3C2410_GPIO_OFFSET(pin);
+ val &= 1;
+ val += 1;
+ } else {
+ val >>= S3C2410_GPIO_OFFSET(pin)*2;
+ val &= 3;
+ }
+
+ return val | S3C2410_GPIO_INPUT;
+}
+
+EXPORT_SYMBOL(s3c2410_gpio_getcfg);
+
+void s3c2410_gpio_pullup(unsigned int pin, unsigned int to)
+{
+ void __iomem *base = S3C24XX_GPIO_BASE(pin);
+ unsigned long offs = S3C2410_GPIO_OFFSET(pin);
+ unsigned long flags;
+ unsigned long up;
+
+ if (pin < S3C2410_GPIO_BANKB)
+ return;
+
+ local_irq_save(flags);
+
+ up = __raw_readl(base + 0x08);
+ up &= ~(1L << offs);
+ up |= to << offs;
+ __raw_writel(up, base + 0x08);
+
+ local_irq_restore(flags);
+}
+
+EXPORT_SYMBOL(s3c2410_gpio_pullup);
+
+void s3c2410_gpio_setpin(unsigned int pin, unsigned int to)
+{
+ void __iomem *base = S3C24XX_GPIO_BASE(pin);
+ unsigned long offs = S3C2410_GPIO_OFFSET(pin);
+ unsigned long flags;
+ unsigned long dat;
+
+ local_irq_save(flags);
+
+ dat = __raw_readl(base + 0x04);
+ dat &= ~(1 << offs);
+ dat |= to << offs;
+ __raw_writel(dat, base + 0x04);
+
+ local_irq_restore(flags);
+}
+
+EXPORT_SYMBOL(s3c2410_gpio_setpin);
+
+unsigned int s3c2410_gpio_getpin(unsigned int pin)
+{
+ void __iomem *base = S3C24XX_GPIO_BASE(pin);
+ unsigned long offs = S3C2410_GPIO_OFFSET(pin);
+
+ return __raw_readl(base + 0x04) & (1<< offs);
+}
+
+EXPORT_SYMBOL(s3c2410_gpio_getpin);
+
+unsigned int s3c2410_modify_misccr(unsigned int clear, unsigned int change)
+{
+ unsigned long flags;
+ unsigned long misccr;
+
+ local_irq_save(flags);
+ misccr = __raw_readl(S3C24XX_MISCCR);
+ misccr &= ~clear;
+ misccr ^= change;
+ __raw_writel(misccr, S3C24XX_MISCCR);
+ local_irq_restore(flags);
+
+ return misccr;
+}
+
+EXPORT_SYMBOL(s3c2410_modify_misccr);
+
+int s3c2410_gpio_getirq(unsigned int pin)
+{
+ if (pin < S3C2410_GPF0 || pin > S3C2410_GPG15)
+ return -1; /* not valid interrupts */
+
+ if (pin < S3C2410_GPG0 && pin > S3C2410_GPF7)
+ return -1; /* not valid pin */
+
+ if (pin < S3C2410_GPF4)
+ return (pin - S3C2410_GPF0) + IRQ_EINT0;
+
+ if (pin < S3C2410_GPG0)
+ return (pin - S3C2410_GPF4) + IRQ_EINT4;
+
+ return (pin - S3C2410_GPG0) + IRQ_EINT8;
+}
+
+EXPORT_SYMBOL(s3c2410_gpio_getirq);
diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c
new file mode 100644
index 0000000..ce18639
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/irq.c
@@ -0,0 +1,801 @@
+/* linux/arch/arm/plat-s3c24xx/irq.c
+ *
+ * Copyright (c) 2003,2004 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Changelog:
+ *
+ * 22-Jul-2004 Ben Dooks <ben@simtec.co.uk>
+ * Fixed compile warnings
+ *
+ * 22-Jul-2004 Roc Wu <cooloney@yahoo.com.cn>
+ * Fixed s3c_extirq_type
+ *
+ * 21-Jul-2004 Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org>
+ * Addition of ADC/TC demux
+ *
+ * 04-Oct-2004 Klaus Fetscher <k.fetscher@fetron.de>
+ * Fix for set_irq_type() on low EINT numbers
+ *
+ * 05-Oct-2004 Ben Dooks <ben@simtec.co.uk>
+ * Tidy up KF's patch and sort out new release
+ *
+ * 05-Oct-2004 Ben Dooks <ben@simtec.co.uk>
+ * Add support for power management controls
+ *
+ * 04-Nov-2004 Ben Dooks
+ * Fix standard IRQ wake for EINT0..4 and RTC
+ *
+ * 22-Feb-2005 Ben Dooks
+ * Fixed edge-triggering on ADC IRQ
+ *
+ * 28-Jun-2005 Ben Dooks
+ * Mark IRQ_LCD valid
+ *
+ * 25-Jul-2005 Ben Dooks
+ * Split the S3C2440 IRQ code to seperate file
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/ptrace.h>
+#include <linux/sysdev.h>
+
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+
+#include <asm/mach/irq.h>
+
+#include <asm/arch/regs-irq.h>
+#include <asm/arch/regs-gpio.h>
+
+#include <asm/plat-s3c24xx/cpu.h>
+#include <asm/plat-s3c24xx/pm.h>
+#include <asm/plat-s3c24xx/irq.h>
+
+/* wakeup irq control */
+
+#ifdef CONFIG_PM
+
+/* state for IRQs over sleep */
+
+/* default is to allow for EINT0..EINT15, and IRQ_RTC as wakeup sources
+ *
+ * set bit to 1 in allow bitfield to enable the wakeup settings on it
+*/
+
+unsigned long s3c_irqwake_intallow = 1L << (IRQ_RTC - IRQ_EINT0) | 0xfL;
+unsigned long s3c_irqwake_intmask = 0xffffffffL;
+unsigned long s3c_irqwake_eintallow = 0x0000fff0L;
+unsigned long s3c_irqwake_eintmask = 0xffffffffL;
+
+int
+s3c_irq_wake(unsigned int irqno, unsigned int state)
+{
+ unsigned long irqbit = 1 << (irqno - IRQ_EINT0);
+
+ if (!(s3c_irqwake_intallow & irqbit))
+ return -ENOENT;
+
+ printk(KERN_INFO "wake %s for irq %d\n",
+ state ? "enabled" : "disabled", irqno);
+
+ if (!state)
+ s3c_irqwake_intmask |= irqbit;
+ else
+ s3c_irqwake_intmask &= ~irqbit;
+
+ return 0;
+}
+
+static int
+s3c_irqext_wake(unsigned int irqno, unsigned int state)
+{
+ unsigned long bit = 1L << (irqno - EXTINT_OFF);
+
+ if (!(s3c_irqwake_eintallow & bit))
+ return -ENOENT;
+
+ printk(KERN_INFO "wake %s for irq %d\n",
+ state ? "enabled" : "disabled", irqno);
+
+ if (!state)
+ s3c_irqwake_eintmask |= bit;
+ else
+ s3c_irqwake_eintmask &= ~bit;
+
+ return 0;
+}
+
+#else
+#define s3c_irqext_wake NULL
+#define s3c_irq_wake NULL
+#endif
+
+
+static void
+s3c_irq_mask(unsigned int irqno)
+{
+ unsigned long mask;
+
+ irqno -= IRQ_EINT0;
+
+ mask = __raw_readl(S3C2410_INTMSK);
+ mask |= 1UL << irqno;
+ __raw_writel(mask, S3C2410_INTMSK);
+}
+
+static inline void
+s3c_irq_ack(unsigned int irqno)
+{
+ unsigned long bitval = 1UL << (irqno - IRQ_EINT0);
+
+ __raw_writel(bitval, S3C2410_SRCPND);
+ __raw_writel(bitval, S3C2410_INTPND);
+}
+
+static inline void
+s3c_irq_maskack(unsigned int irqno)
+{
+ unsigned long bitval = 1UL << (irqno - IRQ_EINT0);
+ unsigned long mask;
+
+ mask = __raw_readl(S3C2410_INTMSK);
+ __raw_writel(mask|bitval, S3C2410_INTMSK);
+
+ __raw_writel(bitval, S3C2410_SRCPND);
+ __raw_writel(bitval, S3C2410_INTPND);
+}
+
+
+static void
+s3c_irq_unmask(unsigned int irqno)
+{
+ unsigned long mask;
+
+ if (irqno != IRQ_TIMER4 && irqno != IRQ_EINT8t23)
+ irqdbf2("s3c_irq_unmask %d\n", irqno);
+
+ irqno -= IRQ_EINT0;
+
+ mask = __raw_readl(S3C2410_INTMSK);
+ mask &= ~(1UL << irqno);
+ __raw_writel(mask, S3C2410_INTMSK);
+}
+
+struct irq_chip s3c_irq_level_chip = {
+ .name = "s3c-level",
+ .ack = s3c_irq_maskack,
+ .mask = s3c_irq_mask,
+ .unmask = s3c_irq_unmask,
+ .set_wake = s3c_irq_wake
+};
+
+static struct irq_chip s3c_irq_chip = {
+ .name = "s3c",
+ .ack = s3c_irq_ack,
+ .mask = s3c_irq_mask,
+ .unmask = s3c_irq_unmask,
+ .set_wake = s3c_irq_wake
+};
+
+static void
+s3c_irqext_mask(unsigned int irqno)
+{
+ unsigned long mask;
+
+ irqno -= EXTINT_OFF;
+
+ mask = __raw_readl(S3C24XX_EINTMASK);
+ mask |= ( 1UL << irqno);
+ __raw_writel(mask, S3C24XX_EINTMASK);
+}
+
+static void
+s3c_irqext_ack(unsigned int irqno)
+{
+ unsigned long req;
+ unsigned long bit;
+ unsigned long mask;
+
+ bit = 1UL << (irqno - EXTINT_OFF);
+
+ mask = __raw_readl(S3C24XX_EINTMASK);
+
+ __raw_writel(bit, S3C24XX_EINTPEND);
+
+ req = __raw_readl(S3C24XX_EINTPEND);
+ req &= ~mask;
+
+ /* not sure if we should be acking the parent irq... */
+
+ if (irqno <= IRQ_EINT7 ) {
+ if ((req & 0xf0) == 0)
+ s3c_irq_ack(IRQ_EINT4t7);
+ } else {
+ if ((req >> 8) == 0)
+ s3c_irq_ack(IRQ_EINT8t23);
+ }
+}
+
+static void
+s3c_irqext_unmask(unsigned int irqno)
+{
+ unsigned long mask;
+
+ irqno -= EXTINT_OFF;
+
+ mask = __raw_readl(S3C24XX_EINTMASK);
+ mask &= ~( 1UL << irqno);
+ __raw_writel(mask, S3C24XX_EINTMASK);
+}
+
+int
+s3c_irqext_type(unsigned int irq, unsigned int type)
+{
+ void __iomem *extint_reg;
+ void __iomem *gpcon_reg;
+ unsigned long gpcon_offset, extint_offset;
+ unsigned long newvalue = 0, value;
+
+ if ((irq >= IRQ_EINT0) && (irq <= IRQ_EINT3))
+ {
+ gpcon_reg = S3C2410_GPFCON;
+ extint_reg = S3C24XX_EXTINT0;
+ gpcon_offset = (irq - IRQ_EINT0) * 2;
+ extint_offset = (irq - IRQ_EINT0) * 4;
+ }
+ else if ((irq >= IRQ_EINT4) && (irq <= IRQ_EINT7))
+ {
+ gpcon_reg = S3C2410_GPFCON;
+ extint_reg = S3C24XX_EXTINT0;
+ gpcon_offset = (irq - (EXTINT_OFF)) * 2;
+ extint_offset = (irq - (EXTINT_OFF)) * 4;
+ }
+ else if ((irq >= IRQ_EINT8) && (irq <= IRQ_EINT15))
+ {
+ gpcon_reg = S3C2410_GPGCON;
+ extint_reg = S3C24XX_EXTINT1;
+ gpcon_offset = (irq - IRQ_EINT8) * 2;
+ extint_offset = (irq - IRQ_EINT8) * 4;
+ }
+ else if ((irq >= IRQ_EINT16) && (irq <= IRQ_EINT23))
+ {
+ gpcon_reg = S3C2410_GPGCON;
+ extint_reg = S3C24XX_EXTINT2;
+ gpcon_offset = (irq - IRQ_EINT8) * 2;
+ extint_offset = (irq - IRQ_EINT16) * 4;
+ } else
+ return -1;
+
+ /* Set the GPIO to external interrupt mode */
+ value = __raw_readl(gpcon_reg);
+ value = (value & ~(3 << gpcon_offset)) | (0x02 << gpcon_offset);
+ __raw_writel(value, gpcon_reg);
+
+ /* Set the external interrupt to pointed trigger type */
+ switch (type)
+ {
+ case IRQT_NOEDGE:
+ printk(KERN_WARNING "No edge setting!\n");
+ break;
+
+ case IRQT_RISING:
+ newvalue = S3C2410_EXTINT_RISEEDGE;
+ break;
+
+ case IRQT_FALLING:
+ newvalue = S3C2410_EXTINT_FALLEDGE;
+ break;
+
+ case IRQT_BOTHEDGE:
+ newvalue = S3C2410_EXTINT_BOTHEDGE;
+ break;
+
+ case IRQT_LOW:
+ newvalue = S3C2410_EXTINT_LOWLEV;
+ break;
+
+ case IRQT_HIGH:
+ newvalue = S3C2410_EXTINT_HILEV;
+ break;
+
+ default:
+ printk(KERN_ERR "No such irq type %d", type);
+ return -1;
+ }
+
+ value = __raw_readl(extint_reg);
+ value = (value & ~(7 << extint_offset)) | (newvalue << extint_offset);
+ __raw_writel(value, extint_reg);
+
+ return 0;
+}
+
+static struct irq_chip s3c_irqext_chip = {
+ .name = "s3c-ext",
+ .mask = s3c_irqext_mask,
+ .unmask = s3c_irqext_unmask,
+ .ack = s3c_irqext_ack,
+ .set_type = s3c_irqext_type,
+ .set_wake = s3c_irqext_wake
+};
+
+static struct irq_chip s3c_irq_eint0t4 = {
+ .name = "s3c-ext0",
+ .ack = s3c_irq_ack,
+ .mask = s3c_irq_mask,
+ .unmask = s3c_irq_unmask,
+ .set_wake = s3c_irq_wake,
+ .set_type = s3c_irqext_type,
+};
+
+/* mask values for the parent registers for each of the interrupt types */
+
+#define INTMSK_UART0 (1UL << (IRQ_UART0 - IRQ_EINT0))
+#define INTMSK_UART1 (1UL << (IRQ_UART1 - IRQ_EINT0))
+#define INTMSK_UART2 (1UL << (IRQ_UART2 - IRQ_EINT0))
+#define INTMSK_ADCPARENT (1UL << (IRQ_ADCPARENT - IRQ_EINT0))
+
+
+/* UART0 */
+
+static void
+s3c_irq_uart0_mask(unsigned int irqno)
+{
+ s3c_irqsub_mask(irqno, INTMSK_UART0, 7);
+}
+
+static void
+s3c_irq_uart0_unmask(unsigned int irqno)
+{
+ s3c_irqsub_unmask(irqno, INTMSK_UART0);
+}
+
+static void
+s3c_irq_uart0_ack(unsigned int irqno)
+{
+ s3c_irqsub_maskack(irqno, INTMSK_UART0, 7);
+}
+
+static struct irq_chip s3c_irq_uart0 = {
+ .name = "s3c-uart0",
+ .mask = s3c_irq_uart0_mask,
+ .unmask = s3c_irq_uart0_unmask,
+ .ack = s3c_irq_uart0_ack,
+};
+
+/* UART1 */
+
+static void
+s3c_irq_uart1_mask(unsigned int irqno)
+{
+ s3c_irqsub_mask(irqno, INTMSK_UART1, 7 << 3);
+}
+
+static void
+s3c_irq_uart1_unmask(unsigned int irqno)
+{
+ s3c_irqsub_unmask(irqno, INTMSK_UART1);
+}
+
+static void
+s3c_irq_uart1_ack(unsigned int irqno)
+{
+ s3c_irqsub_maskack(irqno, INTMSK_UART1, 7 << 3);
+}
+
+static struct irq_chip s3c_irq_uart1 = {
+ .name = "s3c-uart1",
+ .mask = s3c_irq_uart1_mask,
+ .unmask = s3c_irq_uart1_unmask,
+ .ack = s3c_irq_uart1_ack,
+};
+
+/* UART2 */
+
+static void
+s3c_irq_uart2_mask(unsigned int irqno)
+{
+ s3c_irqsub_mask(irqno, INTMSK_UART2, 7 << 6);
+}
+
+static void
+s3c_irq_uart2_unmask(unsigned int irqno)
+{
+ s3c_irqsub_unmask(irqno, INTMSK_UART2);
+}
+
+static void
+s3c_irq_uart2_ack(unsigned int irqno)
+{
+ s3c_irqsub_maskack(irqno, INTMSK_UART2, 7 << 6);
+}
+
+static struct irq_chip s3c_irq_uart2 = {
+ .name = "s3c-uart2",
+ .mask = s3c_irq_uart2_mask,
+ .unmask = s3c_irq_uart2_unmask,
+ .ack = s3c_irq_uart2_ack,
+};
+
+/* ADC and Touchscreen */
+
+static void
+s3c_irq_adc_mask(unsigned int irqno)
+{
+ s3c_irqsub_mask(irqno, INTMSK_ADCPARENT, 3 << 9);
+}
+
+static void
+s3c_irq_adc_unmask(unsigned int irqno)
+{
+ s3c_irqsub_unmask(irqno, INTMSK_ADCPARENT);
+}
+
+static void
+s3c_irq_adc_ack(unsigned int irqno)
+{
+ s3c_irqsub_ack(irqno, INTMSK_ADCPARENT, 3 << 9);
+}
+
+static struct irq_chip s3c_irq_adc = {
+ .name = "s3c-adc",
+ .mask = s3c_irq_adc_mask,
+ .unmask = s3c_irq_adc_unmask,
+ .ack = s3c_irq_adc_ack,
+};
+
+/* irq demux for adc */
+static void s3c_irq_demux_adc(unsigned int irq,
+ struct irq_desc *desc)
+{
+ unsigned int subsrc, submsk;
+ unsigned int offset = 9;
+ struct irq_desc *mydesc;
+
+ /* read the current pending interrupts, and the mask
+ * for what it is available */
+
+ subsrc = __raw_readl(S3C2410_SUBSRCPND);
+ submsk = __raw_readl(S3C2410_INTSUBMSK);
+
+ subsrc &= ~submsk;
+ subsrc >>= offset;
+ subsrc &= 3;
+
+ if (subsrc != 0) {
+ if (subsrc & 1) {
+ mydesc = irq_desc + IRQ_TC;
+ desc_handle_irq(IRQ_TC, mydesc);
+ }
+ if (subsrc & 2) {
+ mydesc = irq_desc + IRQ_ADC;
+ desc_handle_irq(IRQ_ADC, mydesc);
+ }
+ }
+}
+
+static void s3c_irq_demux_uart(unsigned int start)
+{
+ unsigned int subsrc, submsk;
+ unsigned int offset = start - IRQ_S3CUART_RX0;
+ struct irq_desc *desc;
+
+ /* read the current pending interrupts, and the mask
+ * for what it is available */
+
+ subsrc = __raw_readl(S3C2410_SUBSRCPND);
+ submsk = __raw_readl(S3C2410_INTSUBMSK);
+
+ irqdbf2("s3c_irq_demux_uart: start=%d (%d), subsrc=0x%08x,0x%08x\n",
+ start, offset, subsrc, submsk);
+
+ subsrc &= ~submsk;
+ subsrc >>= offset;
+ subsrc &= 7;
+
+ if (subsrc != 0) {
+ desc = irq_desc + start;
+
+ if (subsrc & 1)
+ desc_handle_irq(start, desc);
+
+ desc++;
+
+ if (subsrc & 2)
+ desc_handle_irq(start+1, desc);
+
+ desc++;
+
+ if (subsrc & 4)
+ desc_handle_irq(start+2, desc);
+ }
+}
+
+/* uart demux entry points */
+
+static void
+s3c_irq_demux_uart0(unsigned int irq,
+ struct irq_desc *desc)
+{
+ irq = irq;
+ s3c_irq_demux_uart(IRQ_S3CUART_RX0);
+}
+
+static void
+s3c_irq_demux_uart1(unsigned int irq,
+ struct irq_desc *desc)
+{
+ irq = irq;
+ s3c_irq_demux_uart(IRQ_S3CUART_RX1);
+}
+
+static void
+s3c_irq_demux_uart2(unsigned int irq,
+ struct irq_desc *desc)
+{
+ irq = irq;
+ s3c_irq_demux_uart(IRQ_S3CUART_RX2);
+}
+
+static void
+s3c_irq_demux_extint8(unsigned int irq,
+ struct irq_desc *desc)
+{
+ unsigned long eintpnd = __raw_readl(S3C24XX_EINTPEND);
+ unsigned long eintmsk = __raw_readl(S3C24XX_EINTMASK);
+
+ eintpnd &= ~eintmsk;
+ eintpnd &= ~0xff; /* ignore lower irqs */
+
+ /* we may as well handle all the pending IRQs here */
+
+ while (eintpnd) {
+ irq = __ffs(eintpnd);
+ eintpnd &= ~(1<<irq);
+
+ irq += (IRQ_EINT4 - 4);
+ desc_handle_irq(irq, irq_desc + irq);
+ }
+
+}
+
+static void
+s3c_irq_demux_extint4t7(unsigned int irq,
+ struct irq_desc *desc)
+{
+ unsigned long eintpnd = __raw_readl(S3C24XX_EINTPEND);
+ unsigned long eintmsk = __raw_readl(S3C24XX_EINTMASK);
+
+ eintpnd &= ~eintmsk;
+ eintpnd &= 0xff; /* only lower irqs */
+
+ /* we may as well handle all the pending IRQs here */
+
+ while (eintpnd) {
+ irq = __ffs(eintpnd);
+ eintpnd &= ~(1<<irq);
+
+ irq += (IRQ_EINT4 - 4);
+
+ desc_handle_irq(irq, irq_desc + irq);
+ }
+}
+
+#ifdef CONFIG_PM
+
+static struct sleep_save irq_save[] = {
+ SAVE_ITEM(S3C2410_INTMSK),
+ SAVE_ITEM(S3C2410_INTSUBMSK),
+};
+
+/* the extint values move between the s3c2410/s3c2440 and the s3c2412
+ * so we use an array to hold them, and to calculate the address of
+ * the register at run-time
+*/
+
+static unsigned long save_extint[3];
+static unsigned long save_eintflt[4];
+static unsigned long save_eintmask;
+
+int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state)
+{
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(save_extint); i++)
+ save_extint[i] = __raw_readl(S3C24XX_EXTINT0 + (i*4));
+
+ for (i = 0; i < ARRAY_SIZE(save_eintflt); i++)
+ save_eintflt[i] = __raw_readl(S3C24XX_EINFLT0 + (i*4));
+
+ s3c2410_pm_do_save(irq_save, ARRAY_SIZE(irq_save));
+ save_eintmask = __raw_readl(S3C24XX_EINTMASK);
+
+ return 0;
+}
+
+int s3c24xx_irq_resume(struct sys_device *dev)
+{
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(save_extint); i++)
+ __raw_writel(save_extint[i], S3C24XX_EXTINT0 + (i*4));
+
+ for (i = 0; i < ARRAY_SIZE(save_eintflt); i++)
+ __raw_writel(save_eintflt[i], S3C24XX_EINFLT0 + (i*4));
+
+ s3c2410_pm_do_restore(irq_save, ARRAY_SIZE(irq_save));
+ __raw_writel(save_eintmask, S3C24XX_EINTMASK);
+
+ return 0;
+}
+
+#else
+#define s3c24xx_irq_suspend NULL
+#define s3c24xx_irq_resume NULL
+#endif
+
+/* s3c24xx_init_irq
+ *
+ * Initialise S3C2410 IRQ system
+*/
+
+void __init s3c24xx_init_irq(void)
+{
+ unsigned long pend;
+ unsigned long last;
+ int irqno;
+ int i;
+
+ irqdbf("s3c2410_init_irq: clearing interrupt status flags\n");
+
+ /* first, clear all interrupts pending... */
+
+ last = 0;
+ for (i = 0; i < 4; i++) {
+ pend = __raw_readl(S3C24XX_EINTPEND);
+
+ if (pend == 0 || pend == last)
+ break;
+
+ __raw_writel(pend, S3C24XX_EINTPEND);
+ printk("irq: clearing pending ext status %08x\n", (int)pend);
+ last = pend;
+ }
+
+ last = 0;
+ for (i = 0; i < 4; i++) {
+ pend = __raw_readl(S3C2410_INTPND);
+
+ if (pend == 0 || pend == last)
+ break;
+
+ __raw_writel(pend, S3C2410_SRCPND);
+ __raw_writel(pend, S3C2410_INTPND);
+ printk("irq: clearing pending status %08x\n", (int)pend);
+ last = pend;
+ }
+
+ last = 0;
+ for (i = 0; i < 4; i++) {
+ pend = __raw_readl(S3C2410_SUBSRCPND);
+
+ if (pend == 0 || pend == last)
+ break;
+
+ printk("irq: clearing subpending status %08x\n", (int)pend);
+ __raw_writel(pend, S3C2410_SUBSRCPND);
+ last = pend;
+ }
+
+ /* register the main interrupts */
+
+ irqdbf("s3c2410_init_irq: registering s3c2410 interrupt handlers\n");
+
+ for (irqno = IRQ_EINT4t7; irqno <= IRQ_ADCPARENT; irqno++) {
+ /* set all the s3c2410 internal irqs */
+
+ switch (irqno) {
+ /* deal with the special IRQs (cascaded) */
+
+ case IRQ_EINT4t7:
+ case IRQ_EINT8t23:
+ case IRQ_UART0:
+ case IRQ_UART1:
+ case IRQ_UART2:
+ case IRQ_ADCPARENT:
+ set_irq_chip(irqno, &s3c_irq_level_chip);
+ set_irq_handler(irqno, handle_level_irq);
+ break;
+
+ case IRQ_RESERVED6:
+ case IRQ_RESERVED24:
+ /* no IRQ here */
+ break;
+
+ default:
+ //irqdbf("registering irq %d (s3c irq)\n", irqno);
+ set_irq_chip(irqno, &s3c_irq_chip);
+ set_irq_handler(irqno, handle_edge_irq);
+ set_irq_flags(irqno, IRQF_VALID);
+ }
+ }
+
+ /* setup the cascade irq handlers */
+
+ set_irq_chained_handler(IRQ_EINT4t7, s3c_irq_demux_extint4t7);
+ set_irq_chained_handler(IRQ_EINT8t23, s3c_irq_demux_extint8);
+
+ set_irq_chained_handler(IRQ_UART0, s3c_irq_demux_uart0);
+ set_irq_chained_handler(IRQ_UART1, s3c_irq_demux_uart1);
+ set_irq_chained_handler(IRQ_UART2, s3c_irq_demux_uart2);
+ set_irq_chained_handler(IRQ_ADCPARENT, s3c_irq_demux_adc);
+
+ /* external interrupts */
+
+ for (irqno = IRQ_EINT0; irqno <= IRQ_EINT3; irqno++) {
+ irqdbf("registering irq %d (ext int)\n", irqno);
+ set_irq_chip(irqno, &s3c_irq_eint0t4);
+ set_irq_handler(irqno, handle_edge_irq);
+ set_irq_flags(irqno, IRQF_VALID);
+ }
+
+ for (irqno = IRQ_EINT4; irqno <= IRQ_EINT23; irqno++) {
+ irqdbf("registering irq %d (extended s3c irq)\n", irqno);
+ set_irq_chip(irqno, &s3c_irqext_chip);
+ set_irq_handler(irqno, handle_edge_irq);
+ set_irq_flags(irqno, IRQF_VALID);
+ }
+
+ /* register the uart interrupts */
+
+ irqdbf("s3c2410: registering external interrupts\n");
+
+ for (irqno = IRQ_S3CUART_RX0; irqno <= IRQ_S3CUART_ERR0; irqno++) {
+ irqdbf("registering irq %d (s3c uart0 irq)\n", irqno);
+ set_irq_chip(irqno, &s3c_irq_uart0);
+ set_irq_handler(irqno, handle_level_irq);
+ set_irq_flags(irqno, IRQF_VALID);
+ }
+
+ for (irqno = IRQ_S3CUART_RX1; irqno <= IRQ_S3CUART_ERR1; irqno++) {
+ irqdbf("registering irq %d (s3c uart1 irq)\n", irqno);
+ set_irq_chip(irqno, &s3c_irq_uart1);
+ set_irq_handler(irqno, handle_level_irq);
+ set_irq_flags(irqno, IRQF_VALID);
+ }
+
+ for (irqno = IRQ_S3CUART_RX2; irqno <= IRQ_S3CUART_ERR2; irqno++) {
+ irqdbf("registering irq %d (s3c uart2 irq)\n", irqno);
+ set_irq_chip(irqno, &s3c_irq_uart2);
+ set_irq_handler(irqno, handle_level_irq);
+ set_irq_flags(irqno, IRQF_VALID);
+ }
+
+ for (irqno = IRQ_TC; irqno <= IRQ_ADC; irqno++) {
+ irqdbf("registering irq %d (s3c adc irq)\n", irqno);
+ set_irq_chip(irqno, &s3c_irq_adc);
+ set_irq_handler(irqno, handle_edge_irq);
+ set_irq_flags(irqno, IRQF_VALID);
+ }
+
+ irqdbf("s3c2410: registered interrupt handlers\n");
+}
diff --git a/arch/arm/mach-s3c2410/pm-simtec.c b/arch/arm/plat-s3c24xx/pm-simtec.c
similarity index 94%
rename from arch/arm/mach-s3c2410/pm-simtec.c
rename to arch/arm/plat-s3c24xx/pm-simtec.c
index 619133e..bd965f2 100644
--- a/arch/arm/mach-s3c2410/pm-simtec.c
+++ b/arch/arm/plat-s3c24xx/pm-simtec.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c2410/pm-simtec.c
+/* linux/arch/arm/plat-s3c24xx/pm-simtec.c
*
* Copyright (c) 2004 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
@@ -32,7 +32,7 @@
#include <asm/mach-types.h>
-#include "pm.h"
+#include <asm/plat-s3c24xx/pm.h>
#define COPYRIGHT ", (c) 2005 Simtec Electronics"
diff --git a/arch/arm/plat-s3c24xx/pm.c b/arch/arm/plat-s3c24xx/pm.c
new file mode 100644
index 0000000..ecf68d6
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/pm.c
@@ -0,0 +1,659 @@
+/* linux/arch/arm/plat-s3c24xx/pm.c
+ *
+ * Copyright (c) 2004,2006 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX Power Manager (Suspend-To-RAM) support
+ *
+ * See Documentation/arm/Samsung-S3C24XX/Suspend.txt for more information
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Parts based on arch/arm/mach-pxa/pm.c
+ *
+ * Thanks to Dimitry Andric for debugging
+*/
+
+#include <linux/init.h>
+#include <linux/suspend.h>
+#include <linux/errno.h>
+#include <linux/time.h>
+#include <linux/interrupt.h>
+#include <linux/crc32.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/serial_core.h>
+
+#include <asm/cacheflush.h>
+#include <asm/hardware.h>
+#include <asm/io.h>
+
+#include <asm/arch/regs-serial.h>
+#include <asm/arch/regs-clock.h>
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-mem.h>
+#include <asm/arch/regs-irq.h>
+
+#include <asm/mach/time.h>
+
+#include <asm/plat-s3c24xx/pm.h>
+
+/* for external use */
+
+unsigned long s3c_pm_flags;
+
+#define PFX "s3c24xx-pm: "
+
+static struct sleep_save core_save[] = {
+ SAVE_ITEM(S3C2410_LOCKTIME),
+ SAVE_ITEM(S3C2410_CLKCON),
+
+ /* we restore the timings here, with the proviso that the board
+ * brings the system up in an slower, or equal frequency setting
+ * to the original system.
+ *
+ * if we cannot guarantee this, then things are going to go very
+ * wrong here, as we modify the refresh and both pll settings.
+ */
+
+ SAVE_ITEM(S3C2410_BWSCON),
+ SAVE_ITEM(S3C2410_BANKCON0),
+ SAVE_ITEM(S3C2410_BANKCON1),
+ SAVE_ITEM(S3C2410_BANKCON2),
+ SAVE_ITEM(S3C2410_BANKCON3),
+ SAVE_ITEM(S3C2410_BANKCON4),
+ SAVE_ITEM(S3C2410_BANKCON5),
+
+ SAVE_ITEM(S3C2410_CLKDIVN),
+ SAVE_ITEM(S3C2410_MPLLCON),
+ SAVE_ITEM(S3C2410_UPLLCON),
+ SAVE_ITEM(S3C2410_CLKSLOW),
+ SAVE_ITEM(S3C2410_REFRESH),
+};
+
+static struct sleep_save gpio_save[] = {
+ SAVE_ITEM(S3C2410_GPACON),
+ SAVE_ITEM(S3C2410_GPADAT),
+
+ SAVE_ITEM(S3C2410_GPBCON),
+ SAVE_ITEM(S3C2410_GPBDAT),
+ SAVE_ITEM(S3C2410_GPBUP),
+
+ SAVE_ITEM(S3C2410_GPCCON),
+ SAVE_ITEM(S3C2410_GPCDAT),
+ SAVE_ITEM(S3C2410_GPCUP),
+
+ SAVE_ITEM(S3C2410_GPDCON),
+ SAVE_ITEM(S3C2410_GPDDAT),
+ SAVE_ITEM(S3C2410_GPDUP),
+
+ SAVE_ITEM(S3C2410_GPECON),
+ SAVE_ITEM(S3C2410_GPEDAT),
+ SAVE_ITEM(S3C2410_GPEUP),
+
+ SAVE_ITEM(S3C2410_GPFCON),
+ SAVE_ITEM(S3C2410_GPFDAT),
+ SAVE_ITEM(S3C2410_GPFUP),
+
+ SAVE_ITEM(S3C2410_GPGCON),
+ SAVE_ITEM(S3C2410_GPGDAT),
+ SAVE_ITEM(S3C2410_GPGUP),
+
+ SAVE_ITEM(S3C2410_GPHCON),
+ SAVE_ITEM(S3C2410_GPHDAT),
+ SAVE_ITEM(S3C2410_GPHUP),
+
+ SAVE_ITEM(S3C2410_DCLKCON),
+};
+
+#ifdef CONFIG_S3C2410_PM_DEBUG
+
+#define SAVE_UART(va) \
+ SAVE_ITEM((va) + S3C2410_ULCON), \
+ SAVE_ITEM((va) + S3C2410_UCON), \
+ SAVE_ITEM((va) + S3C2410_UFCON), \
+ SAVE_ITEM((va) + S3C2410_UMCON), \
+ SAVE_ITEM((va) + S3C2410_UBRDIV)
+
+static struct sleep_save uart_save[] = {
+ SAVE_UART(S3C24XX_VA_UART0),
+ SAVE_UART(S3C24XX_VA_UART1),
+#ifndef CONFIG_CPU_S3C2400
+ SAVE_UART(S3C24XX_VA_UART2),
+#endif
+};
+
+/* debug
+ *
+ * we send the debug to printascii() to allow it to be seen if the
+ * system never wakes up from the sleep
+*/
+
+extern void printascii(const char *);
+
+void pm_dbg(const char *fmt, ...)
+{
+ va_list va;
+ char buff[256];
+
+ va_start(va, fmt);
+ vsprintf(buff, fmt, va);
+ va_end(va);
+
+ printascii(buff);
+}
+
+static void s3c2410_pm_debug_init(void)
+{
+ unsigned long tmp = __raw_readl(S3C2410_CLKCON);
+
+ /* re-start uart clocks */
+ tmp |= S3C2410_CLKCON_UART0;
+ tmp |= S3C2410_CLKCON_UART1;
+ tmp |= S3C2410_CLKCON_UART2;
+
+ __raw_writel(tmp, S3C2410_CLKCON);
+ udelay(10);
+}
+
+#define DBG(fmt...) pm_dbg(fmt)
+#else
+#define DBG(fmt...) printk(KERN_DEBUG fmt)
+
+#define s3c2410_pm_debug_init() do { } while(0)
+
+static struct sleep_save uart_save[] = {};
+#endif
+
+#if defined(CONFIG_S3C2410_PM_CHECK) && CONFIG_S3C2410_PM_CHECK_CHUNKSIZE != 0
+
+/* suspend checking code...
+ *
+ * this next area does a set of crc checks over all the installed
+ * memory, so the system can verify if the resume was ok.
+ *
+ * CONFIG_S3C2410_PM_CHECK_CHUNKSIZE defines the block-size for the CRC,
+ * increasing it will mean that the area corrupted will be less easy to spot,
+ * and reducing the size will cause the CRC save area to grow
+*/
+
+#define CHECK_CHUNKSIZE (CONFIG_S3C2410_PM_CHECK_CHUNKSIZE * 1024)
+
+static u32 crc_size; /* size needed for the crc block */
+static u32 *crcs; /* allocated over suspend/resume */
+
+typedef u32 *(run_fn_t)(struct resource *ptr, u32 *arg);
+
+/* s3c2410_pm_run_res
+ *
+ * go thorugh the given resource list, and look for system ram
+*/
+
+static void s3c2410_pm_run_res(struct resource *ptr, run_fn_t fn, u32 *arg)
+{
+ while (ptr != NULL) {
+ if (ptr->child != NULL)
+ s3c2410_pm_run_res(ptr->child, fn, arg);
+
+ if ((ptr->flags & IORESOURCE_MEM) &&
+ strcmp(ptr->name, "System RAM") == 0) {
+ DBG("Found system RAM at %08lx..%08lx\n",
+ ptr->start, ptr->end);
+ arg = (fn)(ptr, arg);
+ }
+
+ ptr = ptr->sibling;
+ }
+}
+
+static void s3c2410_pm_run_sysram(run_fn_t fn, u32 *arg)
+{
+ s3c2410_pm_run_res(&iomem_resource, fn, arg);
+}
+
+static u32 *s3c2410_pm_countram(struct resource *res, u32 *val)
+{
+ u32 size = (u32)(res->end - res->start)+1;
+
+ size += CHECK_CHUNKSIZE-1;
+ size /= CHECK_CHUNKSIZE;
+
+ DBG("Area %08lx..%08lx, %d blocks\n", res->start, res->end, size);
+
+ *val += size * sizeof(u32);
+ return val;
+}
+
+/* s3c2410_pm_prepare_check
+ *
+ * prepare the necessary information for creating the CRCs. This
+ * must be done before the final save, as it will require memory
+ * allocating, and thus touching bits of the kernel we do not
+ * know about.
+*/
+
+static void s3c2410_pm_check_prepare(void)
+{
+ crc_size = 0;
+
+ s3c2410_pm_run_sysram(s3c2410_pm_countram, &crc_size);
+
+ DBG("s3c2410_pm_prepare_check: %u checks needed\n", crc_size);
+
+ crcs = kmalloc(crc_size+4, GFP_KERNEL);
+ if (crcs == NULL)
+ printk(KERN_ERR "Cannot allocated CRC save area\n");
+}
+
+static u32 *s3c2410_pm_makecheck(struct resource *res, u32 *val)
+{
+ unsigned long addr, left;
+
+ for (addr = res->start; addr < res->end;
+ addr += CHECK_CHUNKSIZE) {
+ left = res->end - addr;
+
+ if (left > CHECK_CHUNKSIZE)
+ left = CHECK_CHUNKSIZE;
+
+ *val = crc32_le(~0, phys_to_virt(addr), left);
+ val++;
+ }
+
+ return val;
+}
+
+/* s3c2410_pm_check_store
+ *
+ * compute the CRC values for the memory blocks before the final
+ * sleep.
+*/
+
+static void s3c2410_pm_check_store(void)
+{
+ if (crcs != NULL)
+ s3c2410_pm_run_sysram(s3c2410_pm_makecheck, crcs);
+}
+
+/* in_region
+ *
+ * return TRUE if the area defined by ptr..ptr+size contatins the
+ * what..what+whatsz
+*/
+
+static inline int in_region(void *ptr, int size, void *what, size_t whatsz)
+{
+ if ((what+whatsz) < ptr)
+ return 0;
+
+ if (what > (ptr+size))
+ return 0;
+
+ return 1;
+}
+
+static u32 *s3c2410_pm_runcheck(struct resource *res, u32 *val)
+{
+ void *save_at = phys_to_virt(s3c2410_sleep_save_phys);
+ unsigned long addr;
+ unsigned long left;
+ void *ptr;
+ u32 calc;
+
+ for (addr = res->start; addr < res->end;
+ addr += CHECK_CHUNKSIZE) {
+ left = res->end - addr;
+
+ if (left > CHECK_CHUNKSIZE)
+ left = CHECK_CHUNKSIZE;
+
+ ptr = phys_to_virt(addr);
+
+ if (in_region(ptr, left, crcs, crc_size)) {
+ DBG("skipping %08lx, has crc block in\n", addr);
+ goto skip_check;
+ }
+
+ if (in_region(ptr, left, save_at, 32*4 )) {
+ DBG("skipping %08lx, has save block in\n", addr);
+ goto skip_check;
+ }
+
+ /* calculate and check the checksum */
+
+ calc = crc32_le(~0, ptr, left);
+ if (calc != *val) {
+ printk(KERN_ERR PFX "Restore CRC error at "
+ "%08lx (%08x vs %08x)\n", addr, calc, *val);
+
+ DBG("Restore CRC error at %08lx (%08x vs %08x)\n",
+ addr, calc, *val);
+ }
+
+ skip_check:
+ val++;
+ }
+
+ return val;
+}
+
+/* s3c2410_pm_check_restore
+ *
+ * check the CRCs after the restore event and free the memory used
+ * to hold them
+*/
+
+static void s3c2410_pm_check_restore(void)
+{
+ if (crcs != NULL) {
+ s3c2410_pm_run_sysram(s3c2410_pm_runcheck, crcs);
+ kfree(crcs);
+ crcs = NULL;
+ }
+}
+
+#else
+
+#define s3c2410_pm_check_prepare() do { } while(0)
+#define s3c2410_pm_check_restore() do { } while(0)
+#define s3c2410_pm_check_store() do { } while(0)
+#endif
+
+/* helper functions to save and restore register state */
+
+void s3c2410_pm_do_save(struct sleep_save *ptr, int count)
+{
+ for (; count > 0; count--, ptr++) {
+ ptr->val = __raw_readl(ptr->reg);
+ DBG("saved %p value %08lx\n", ptr->reg, ptr->val);
+ }
+}
+
+/* s3c2410_pm_do_restore
+ *
+ * restore the system from the given list of saved registers
+ *
+ * Note, we do not use DBG() in here, as the system may not have
+ * restore the UARTs state yet
+*/
+
+void s3c2410_pm_do_restore(struct sleep_save *ptr, int count)
+{
+ for (; count > 0; count--, ptr++) {
+ printk(KERN_DEBUG "restore %p (restore %08lx, was %08x)\n",
+ ptr->reg, ptr->val, __raw_readl(ptr->reg));
+
+ __raw_writel(ptr->val, ptr->reg);
+ }
+}
+
+/* s3c2410_pm_do_restore_core
+ *
+ * similar to s3c2410_pm_do_restore_core
+ *
+ * WARNING: Do not put any debug in here that may effect memory or use
+ * peripherals, as things may be changing!
+*/
+
+static void s3c2410_pm_do_restore_core(struct sleep_save *ptr, int count)
+{
+ for (; count > 0; count--, ptr++) {
+ __raw_writel(ptr->val, ptr->reg);
+ }
+}
+
+/* s3c2410_pm_show_resume_irqs
+ *
+ * print any IRQs asserted at resume time (ie, we woke from)
+*/
+
+static void s3c2410_pm_show_resume_irqs(int start, unsigned long which,
+ unsigned long mask)
+{
+ int i;
+
+ which &= ~mask;
+
+ for (i = 0; i <= 31; i++) {
+ if ((which) & (1L<<i)) {
+ DBG("IRQ %d asserted at resume\n", start+i);
+ }
+ }
+}
+
+/* s3c2410_pm_check_resume_pin
+ *
+ * check to see if the pin is configured correctly for sleep mode, and
+ * make any necessary adjustments if it is not
+*/
+
+static void s3c2410_pm_check_resume_pin(unsigned int pin, unsigned int irqoffs)
+{
+ unsigned long irqstate;
+ unsigned long pinstate;
+ int irq = s3c2410_gpio_getirq(pin);
+
+ if (irqoffs < 4)
+ irqstate = s3c_irqwake_intmask & (1L<<irqoffs);
+ else
+ irqstate = s3c_irqwake_eintmask & (1L<<irqoffs);
+
+ pinstate = s3c2410_gpio_getcfg(pin);
+
+ if (!irqstate) {
+ if (pinstate == S3C2410_GPIO_IRQ)
+ DBG("Leaving IRQ %d (pin %d) enabled\n", irq, pin);
+ } else {
+ if (pinstate == S3C2410_GPIO_IRQ) {
+ DBG("Disabling IRQ %d (pin %d)\n", irq, pin);
+ s3c2410_gpio_cfgpin(pin, S3C2410_GPIO_INPUT);
+ }
+ }
+}
+
+/* s3c2410_pm_configure_extint
+ *
+ * configure all external interrupt pins
+*/
+
+static void s3c2410_pm_configure_extint(void)
+{
+ int pin;
+
+ /* for each of the external interrupts (EINT0..EINT15) we
+ * need to check wether it is an external interrupt source,
+ * and then configure it as an input if it is not
+ */
+
+ for (pin = S3C2410_GPF0; pin <= S3C2410_GPF7; pin++) {
+ s3c2410_pm_check_resume_pin(pin, pin - S3C2410_GPF0);
+ }
+
+ for (pin = S3C2410_GPG0; pin <= S3C2410_GPG7; pin++) {
+ s3c2410_pm_check_resume_pin(pin, (pin - S3C2410_GPG0)+8);
+ }
+}
+
+void (*pm_cpu_prep)(void);
+void (*pm_cpu_sleep)(void);
+
+#define any_allowed(mask, allow) (((mask) & (allow)) != (allow))
+
+/* s3c2410_pm_enter
+ *
+ * central control for sleep/resume process
+*/
+
+static int s3c2410_pm_enter(suspend_state_t state)
+{
+ unsigned long regs_save[16];
+
+ /* ensure the debug is initialised (if enabled) */
+
+ s3c2410_pm_debug_init();
+
+ DBG("s3c2410_pm_enter(%d)\n", state);
+
+ if (pm_cpu_prep == NULL || pm_cpu_sleep == NULL) {
+ printk(KERN_ERR PFX "error: no cpu sleep functions set\n");
+ return -EINVAL;
+ }
+
+ if (state != PM_SUSPEND_MEM) {
+ printk(KERN_ERR PFX "error: only PM_SUSPEND_MEM supported\n");
+ return -EINVAL;
+ }
+
+ /* check if we have anything to wake-up with... bad things seem
+ * to happen if you suspend with no wakeup (system will often
+ * require a full power-cycle)
+ */
+
+ if (!any_allowed(s3c_irqwake_intmask, s3c_irqwake_intallow) &&
+ !any_allowed(s3c_irqwake_eintmask, s3c_irqwake_eintallow)) {
+ printk(KERN_ERR PFX "No sources enabled for wake-up!\n");
+ printk(KERN_ERR PFX "Aborting sleep\n");
+ return -EINVAL;
+ }
+
+ /* prepare check area if configured */
+
+ s3c2410_pm_check_prepare();
+
+ /* store the physical address of the register recovery block */
+
+ s3c2410_sleep_save_phys = virt_to_phys(regs_save);
+
+ DBG("s3c2410_sleep_save_phys=0x%08lx\n", s3c2410_sleep_save_phys);
+
+ /* save all necessary core registers not covered by the drivers */
+
+ s3c2410_pm_do_save(gpio_save, ARRAY_SIZE(gpio_save));
+ s3c2410_pm_do_save(core_save, ARRAY_SIZE(core_save));
+ s3c2410_pm_do_save(uart_save, ARRAY_SIZE(uart_save));
+
+ /* set the irq configuration for wake */
+
+ s3c2410_pm_configure_extint();
+
+ DBG("sleep: irq wakeup masks: %08lx,%08lx\n",
+ s3c_irqwake_intmask, s3c_irqwake_eintmask);
+
+ __raw_writel(s3c_irqwake_intmask, S3C2410_INTMSK);
+ __raw_writel(s3c_irqwake_eintmask, S3C2410_EINTMASK);
+
+ /* ack any outstanding external interrupts before we go to sleep */
+
+ __raw_writel(__raw_readl(S3C2410_EINTPEND), S3C2410_EINTPEND);
+ __raw_writel(__raw_readl(S3C2410_INTPND), S3C2410_INTPND);
+ __raw_writel(__raw_readl(S3C2410_SRCPND), S3C2410_SRCPND);
+
+ /* call cpu specific preperation */
+
+ pm_cpu_prep();
+
+ /* flush cache back to ram */
+
+ flush_cache_all();
+
+ s3c2410_pm_check_store();
+
+ /* send the cpu to sleep... */
+
+ __raw_writel(0x00, S3C2410_CLKCON); /* turn off clocks over sleep */
+
+ /* s3c2410_cpu_save will also act as our return point from when
+ * we resume as it saves its own register state, so use the return
+ * code to differentiate return from save and return from sleep */
+
+ if (s3c2410_cpu_save(regs_save) == 0) {
+ flush_cache_all();
+ pm_cpu_sleep();
+ }
+
+ /* restore the cpu state */
+
+ cpu_init();
+
+ /* restore the system state */
+
+ s3c2410_pm_do_restore_core(core_save, ARRAY_SIZE(core_save));
+ s3c2410_pm_do_restore(gpio_save, ARRAY_SIZE(gpio_save));
+ s3c2410_pm_do_restore(uart_save, ARRAY_SIZE(uart_save));
+
+ s3c2410_pm_debug_init();
+
+ /* check what irq (if any) restored the system */
+
+ DBG("post sleep: IRQs 0x%08x, 0x%08x\n",
+ __raw_readl(S3C2410_SRCPND),
+ __raw_readl(S3C2410_EINTPEND));
+
+ s3c2410_pm_show_resume_irqs(IRQ_EINT0, __raw_readl(S3C2410_SRCPND),
+ s3c_irqwake_intmask);
+
+ s3c2410_pm_show_resume_irqs(IRQ_EINT4-4, __raw_readl(S3C2410_EINTPEND),
+ s3c_irqwake_eintmask);
+
+ DBG("post sleep, preparing to return\n");
+
+ s3c2410_pm_check_restore();
+
+ /* ok, let's return from sleep */
+
+ DBG("S3C2410 PM Resume (post-restore)\n");
+ return 0;
+}
+
+/*
+ * Called after processes are frozen, but before we shut down devices.
+ */
+static int s3c2410_pm_prepare(suspend_state_t state)
+{
+ return 0;
+}
+
+/*
+ * Called after devices are re-setup, but before processes are thawed.
+ */
+static int s3c2410_pm_finish(suspend_state_t state)
+{
+ return 0;
+}
+
+/*
+ * Set to PM_DISK_FIRMWARE so we can quickly veto suspend-to-disk.
+ */
+static struct pm_ops s3c2410_pm_ops = {
+ .pm_disk_mode = PM_DISK_FIRMWARE,
+ .prepare = s3c2410_pm_prepare,
+ .enter = s3c2410_pm_enter,
+ .finish = s3c2410_pm_finish,
+};
+
+/* s3c2410_pm_init
+ *
+ * Attach the power management functions. This should be called
+ * from the board specific initialisation if the board supports
+ * it.
+*/
+
+int __init s3c2410_pm_init(void)
+{
+ printk("S3C2410 Power Management, (c) 2004 Simtec Electronics\n");
+
+ pm_set_ops(&s3c2410_pm_ops);
+ return 0;
+}
diff --git a/arch/arm/mach-s3c2410/s3c244x-irq.c b/arch/arm/plat-s3c24xx/s3c244x-irq.c
similarity index 95%
rename from arch/arm/mach-s3c2410/s3c244x-irq.c
rename to arch/arm/plat-s3c24xx/s3c244x-irq.c
index ede9463..a0e39d8 100644
--- a/arch/arm/mach-s3c2410/s3c244x-irq.c
+++ b/arch/arm/plat-s3c24xx/s3c244x-irq.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c2410/s3c244x-irq.c
+/* linux/arch/arm/plat-s3c24xx/s3c244x-irq.c
*
* Copyright (c) 2003,2004 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
@@ -35,9 +35,9 @@
#include <asm/arch/regs-irq.h>
#include <asm/arch/regs-gpio.h>
-#include "cpu.h"
-#include "pm.h"
-#include "irq.h"
+#include <asm/plat-s3c24xx/cpu.h>
+#include <asm/plat-s3c24xx/pm.h>
+#include <asm/plat-s3c24xx/irq.h>
/* camera irq */
diff --git a/arch/arm/mach-s3c2410/s3c244x.c b/arch/arm/plat-s3c24xx/s3c244x.c
similarity index 92%
rename from arch/arm/mach-s3c2410/s3c244x.c
rename to arch/arm/plat-s3c24xx/s3c244x.c
index 23c7494..767f2e9 100644
--- a/arch/arm/mach-s3c2410/s3c244x.c
+++ b/arch/arm/plat-s3c24xx/s3c244x.c
@@ -1,9 +1,9 @@
-/* linux/arch/arm/mach-s3c2410/s3c244x.c
+/* linux/arch/arm/plat-s3c24xx/s3c244x.c
*
* Copyright (c) 2004-2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
- * Samsung S3C2440 and S3C2442 Mobile CPU support
+ * Samsung S3C2440 and S3C2442 Mobile CPU support (not S3C2443)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -35,13 +35,13 @@
#include <asm/arch/regs-gpioj.h>
#include <asm/arch/regs-dsc.h>
-#include "s3c2410.h"
-#include "s3c2440.h"
+#include <asm/plat-s3c24xx/s3c2410.h>
+#include <asm/plat-s3c24xx/s3c2440.h>
#include "s3c244x.h"
-#include "clock.h"
-#include "devs.h"
-#include "cpu.h"
-#include "pm.h"
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
+#include <asm/plat-s3c24xx/pm.h>
static struct map_desc s3c244x_iodesc[] __initdata = {
IODESC_ENT(CLKPWR),
diff --git a/arch/arm/mach-s3c2410/s3c244x.h b/arch/arm/plat-s3c24xx/s3c244x.h
similarity index 93%
rename from arch/arm/mach-s3c2410/s3c244x.h
rename to arch/arm/plat-s3c24xx/s3c244x.h
index 1488c1e..f8ed176 100644
--- a/arch/arm/mach-s3c2410/s3c244x.h
+++ b/arch/arm/plat-s3c24xx/s3c244x.h
@@ -1,4 +1,4 @@
-/* arch/arm/mach-s3c2410/s3c244x.h
+/* linux/arch/arm/plat-s3c24xx/s3c244x.h
*
* Copyright (c) 2004-2005 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
diff --git a/arch/arm/plat-s3c24xx/sleep.S b/arch/arm/plat-s3c24xx/sleep.S
new file mode 100644
index 0000000..435349d
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/sleep.S
@@ -0,0 +1,157 @@
+/* linux/arch/arm/mach-s3c2410/sleep.S
+ *
+ * Copyright (c) 2004 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 Power Manager (Suspend-To-RAM) support
+ *
+ * Based on PXA/SA1100 sleep code by:
+ * Nicolas Pitre, (c) 2002 Monta Vista Software Inc
+ * Cliff Brake, (c) 2001
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+*/
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <asm/hardware.h>
+#include <asm/arch/map.h>
+
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-clock.h>
+#include <asm/arch/regs-mem.h>
+#include <asm/arch/regs-serial.h>
+
+/* CONFIG_DEBUG_RESUME is dangerous if your bootloader does not
+ * reset the UART configuration, only enable if you really need this!
+*/
+//#define CONFIG_DEBUG_RESUME
+
+ .text
+
+ /* s3c2410_cpu_save
+ *
+ * save enough of the CPU state to allow us to re-start
+ * pm.c code. as we store items like the sp/lr, we will
+ * end up returning from this function when the cpu resumes
+ * so the return value is set to mark this.
+ *
+ * This arangement means we avoid having to flush the cache
+ * from this code.
+ *
+ * entry:
+ * r0 = pointer to save block
+ *
+ * exit:
+ * r0 = 0 => we stored everything
+ * 1 => resumed from sleep
+ */
+
+ENTRY(s3c2410_cpu_save)
+ stmfd sp!, { r4 - r12, lr }
+
+ @@ store co-processor registers
+
+ mrc p15, 0, r4, c13, c0, 0 @ PID
+ mrc p15, 0, r5, c3, c0, 0 @ Domain ID
+ mrc p15, 0, r6, c2, c0, 0 @ translation table base address
+ mrc p15, 0, r7, c1, c0, 0 @ control register
+
+ stmia r0, { r4 - r13 }
+
+ mov r0, #0
+ ldmfd sp, { r4 - r12, pc }
+
+ @@ return to the caller, after having the MMU
+ @@ turned on, this restores the last bits from the
+ @@ stack
+resume_with_mmu:
+ mov r0, #1
+ ldmfd sp!, { r4 - r12, pc }
+
+ .ltorg
+
+ @@ the next bits sit in the .data segment, even though they
+ @@ happen to be code... the s3c2410_sleep_save_phys needs to be
+ @@ accessed by the resume code before it can restore the MMU.
+ @@ This means that the variable has to be close enough for the
+ @@ code to read it... since the .text segment needs to be RO,
+ @@ the data segment can be the only place to put this code.
+
+ .data
+
+ .global s3c2410_sleep_save_phys
+s3c2410_sleep_save_phys:
+ .word 0
+
+ /* s3c2410_cpu_resume
+ *
+ * resume code entry for bootloader to call
+ *
+ * we must put this code here in the data segment as we have no
+ * other way of restoring the stack pointer after sleep, and we
+ * must not write to the code segment (code is read-only)
+ */
+
+ENTRY(s3c2410_cpu_resume)
+ mov r0, #PSR_I_BIT | PSR_F_BIT | SVC_MODE
+ msr cpsr_c, r0
+
+ @@ load UART to allow us to print the two characters for
+ @@ resume debug
+
+ mov r2, #S3C24XX_PA_UART & 0xff000000
+ orr r2, r2, #S3C24XX_PA_UART & 0xff000
+
+#if 0
+ /* SMDK2440 LED set */
+ mov r14, #S3C24XX_PA_GPIO
+ ldr r12, [ r14, #0x54 ]
+ bic r12, r12, #3<<4
+ orr r12, r12, #1<<7
+ str r12, [ r14, #0x54 ]
+#endif
+
+#ifdef CONFIG_DEBUG_RESUME
+ mov r3, #'L'
+ strb r3, [ r2, #S3C2410_UTXH ]
+1001:
+ ldrb r14, [ r3, #S3C2410_UTRSTAT ]
+ tst r14, #S3C2410_UTRSTAT_TXE
+ beq 1001b
+#endif /* CONFIG_DEBUG_RESUME */
+
+ mov r1, #0
+ mcr p15, 0, r1, c8, c7, 0 @@ invalidate I & D TLBs
+ mcr p15, 0, r1, c7, c7, 0 @@ invalidate I & D caches
+
+ ldr r0, s3c2410_sleep_save_phys @ address of restore block
+ ldmia r0, { r4 - r13 }
+
+ mcr p15, 0, r4, c13, c0, 0 @ PID
+ mcr p15, 0, r5, c3, c0, 0 @ Domain ID
+ mcr p15, 0, r6, c2, c0, 0 @ translation table base
+
+#ifdef CONFIG_DEBUG_RESUME
+ mov r3, #'R'
+ strb r3, [ r2, #S3C2410_UTXH ]
+#endif
+
+ ldr r2, =resume_with_mmu
+ mcr p15, 0, r7, c1, c0, 0 @ turn on MMU, etc
+ nop @ second-to-last before mmu
+ mov pc, r2 @ go back to virtual address
+
+ .ltorg
diff --git a/arch/arm/mach-s3c2410/time.c b/arch/arm/plat-s3c24xx/time.c
similarity index 98%
rename from arch/arm/mach-s3c2410/time.c
rename to arch/arm/plat-s3c24xx/time.c
index 9910bf0..c523d1c 100644
--- a/arch/arm/mach-s3c2410/time.c
+++ b/arch/arm/plat-s3c24xx/time.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c2410/time.c
+/* linux/arch/arm/plat-s3c24xx/time.c
*
* Copyright (C) 2003-2005 Simtec Electronics
* Ben Dooks, <ben@simtec.co.uk>
@@ -37,8 +37,8 @@
#include <asm/arch/regs-irq.h>
#include <asm/mach/time.h>
-#include "clock.h"
-#include "cpu.h"
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/cpu.h>
static unsigned long timer_startval;
static unsigned long timer_usec_ticks;
diff --git a/arch/avr32/mach-at32ap/clock.c b/arch/avr32/mach-at32ap/clock.c
index 49e7b12..00c4354 100644
--- a/arch/avr32/mach-at32ap/clock.c
+++ b/arch/avr32/mach-at32ap/clock.c
@@ -3,7 +3,7 @@
*
* Copyright (C) 2006 Atmel Corporation
*
- * Based on arch/arm/mach-at91rm9200/clock.c
+ * Based on arch/arm/mach-at91/clock.c
* Copyright (C) 2005 David Brownell
* Copyright (C) 2005 Ivan Kokshaysky
*
diff --git a/arch/avr32/mach-at32ap/clock.h b/arch/avr32/mach-at32ap/clock.h
index f953f04..bb8e1f2 100644
--- a/arch/avr32/mach-at32ap/clock.h
+++ b/arch/avr32/mach-at32ap/clock.h
@@ -3,7 +3,7 @@
*
* Copyright (C) 2006 Atmel Corporation
*
- * Based on arch/arm/mach-at91rm9200/clock.c
+ * Based on arch/arm/mach-at91/clock.c
* Copyright (C) 2005 David Brownell
* Copyright (C) 2005 Ivan Kokshaysky
*
diff --git a/arch/i386/kernel/acpi/boot.c b/arch/i386/kernel/acpi/boot.c
index fb3e723..e5eb97a 100644
--- a/arch/i386/kernel/acpi/boot.c
+++ b/arch/i386/kernel/acpi/boot.c
@@ -850,10 +850,9 @@
static void __init acpi_process_madt(void)
{
#ifdef CONFIG_X86_LOCAL_APIC
- int count, error;
+ int error;
- count = acpi_table_parse(ACPI_SIG_MADT, acpi_parse_madt);
- if (count >= 1) {
+ if (!acpi_table_parse(ACPI_SIG_MADT, acpi_parse_madt)) {
/*
* Parse MADT LAPIC entries
diff --git a/arch/i386/pci/common.c b/arch/i386/pci/common.c
index 53ca6e8..1bb0693 100644
--- a/arch/i386/pci/common.c
+++ b/arch/i386/pci/common.c
@@ -191,6 +191,94 @@
DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 2950"),
},
},
+ {
+ .callback = set_bf_sort,
+ .ident = "HP ProLiant BL20p G3",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "HP"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL20p G3"),
+ },
+ },
+ {
+ .callback = set_bf_sort,
+ .ident = "HP ProLiant BL20p G4",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "HP"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL20p G4"),
+ },
+ },
+ {
+ .callback = set_bf_sort,
+ .ident = "HP ProLiant BL30p G1",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "HP"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL30p G1"),
+ },
+ },
+ {
+ .callback = set_bf_sort,
+ .ident = "HP ProLiant BL25p G1",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "HP"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL25p G1"),
+ },
+ },
+ {
+ .callback = set_bf_sort,
+ .ident = "HP ProLiant BL35p G1",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "HP"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL35p G1"),
+ },
+ },
+ {
+ .callback = set_bf_sort,
+ .ident = "HP ProLiant BL45p G1",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "HP"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL45p G1"),
+ },
+ },
+ {
+ .callback = set_bf_sort,
+ .ident = "HP ProLiant BL45p G2",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "HP"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL45p G2"),
+ },
+ },
+ {
+ .callback = set_bf_sort,
+ .ident = "HP ProLiant BL460c G1",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "HP"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL460c G1"),
+ },
+ },
+ {
+ .callback = set_bf_sort,
+ .ident = "HP ProLiant BL465c G1",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "HP"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL465c G1"),
+ },
+ },
+ {
+ .callback = set_bf_sort,
+ .ident = "HP ProLiant BL480c G1",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "HP"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL480c G1"),
+ },
+ },
+ {
+ .callback = set_bf_sort,
+ .ident = "HP ProLiant BL685c G1",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "HP"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL685c G1"),
+ },
+ },
{}
};
diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c
index 9197d7b..3549c94 100644
--- a/arch/ia64/kernel/acpi.c
+++ b/arch/ia64/kernel/acpi.c
@@ -651,7 +651,7 @@
* information -- the successor to MPS tables.
*/
- if (acpi_table_parse(ACPI_SIG_MADT, acpi_parse_madt) < 1) {
+ if (acpi_table_parse(ACPI_SIG_MADT, acpi_parse_madt)) {
printk(KERN_ERR PREFIX "Can't find MADT\n");
goto skip_madt;
}
@@ -702,7 +702,7 @@
* gets interrupts such as power and sleep buttons. If it's not
* on a Legacy interrupt, it needs to be setup.
*/
- if (acpi_table_parse(ACPI_SIG_FADT, acpi_parse_fadt) < 1)
+ if (acpi_table_parse(ACPI_SIG_FADT, acpi_parse_fadt))
printk(KERN_ERR PREFIX "Can't find FADT\n");
#ifdef CONFIG_SMP
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 340d9be..6dfbd52 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -620,6 +620,15 @@
tristate "Firmware flash interface"
depends on PPC64 && RTAS_PROC
+config PPC_PMI
+ tristate "Support for PMI"
+ depends PPC_IBM_CELL_BLADE
+ help
+ PMI (Platform Management Interrupt) is a way to
+ communicate with the BMC (Baseboard Mangement Controller).
+ It is used in some IBM Cell blades.
+ default m
+
config MMIO_NVRAM
bool
default n
diff --git a/arch/powerpc/boot/dts/kuroboxHD.dts b/arch/powerpc/boot/dts/kuroboxHD.dts
index 096e94a..b897918 100644
--- a/arch/powerpc/boot/dts/kuroboxHD.dts
+++ b/arch/powerpc/boot/dts/kuroboxHD.dts
@@ -35,7 +35,6 @@
PowerPC,603e { /* Really 8241 */
linux,phandle = <2100>;
- linux,boot-cpu;
device_type = "cpu";
reg = <0>;
clock-frequency = <bebc200>; /* Fixed by bootwrapper */
diff --git a/arch/powerpc/boot/dts/kuroboxHG.dts b/arch/powerpc/boot/dts/kuroboxHG.dts
index d06b0b0..7531027 100644
--- a/arch/powerpc/boot/dts/kuroboxHG.dts
+++ b/arch/powerpc/boot/dts/kuroboxHG.dts
@@ -35,7 +35,6 @@
PowerPC,603e { /* Really 8241 */
linux,phandle = <2100>;
- linux,boot-cpu;
device_type = "cpu";
reg = <0>;
clock-frequency = <fdad680>; /* Fixed by bootwrapper */
diff --git a/arch/powerpc/boot/dts/mpc7448hpc2.dts b/arch/powerpc/boot/dts/mpc7448hpc2.dts
index c4d9562..41d0720 100644
--- a/arch/powerpc/boot/dts/mpc7448hpc2.dts
+++ b/arch/powerpc/boot/dts/mpc7448hpc2.dts
@@ -36,7 +36,6 @@
bus-frequency = <0>; // From U-Boot
32-bit;
linux,phandle = <201>;
- linux,boot-cpu;
};
};
diff --git a/arch/powerpc/boot/dts/mpc8272ads.dts b/arch/powerpc/boot/dts/mpc8272ads.dts
index 26b44f7..260b2e4 100644
--- a/arch/powerpc/boot/dts/mpc8272ads.dts
+++ b/arch/powerpc/boot/dts/mpc8272ads.dts
@@ -34,7 +34,6 @@
clock-frequency = <0>;
32-bit;
linux,phandle = <201>;
- linux,boot-cpu;
};
};
diff --git a/arch/powerpc/boot/dts/mpc8313erdb.dts b/arch/powerpc/boot/dts/mpc8313erdb.dts
index 3d2f5a0..6d72190 100644
--- a/arch/powerpc/boot/dts/mpc8313erdb.dts
+++ b/arch/powerpc/boot/dts/mpc8313erdb.dts
@@ -11,7 +11,7 @@
/ {
model = "MPC8313ERDB";
- compatible = "MPC83xx";
+ compatible = "MPC8313ERDB", "MPC831xRDB", "MPC83xxRDB";
#address-cells = <1>;
#size-cells = <1>;
@@ -59,7 +59,7 @@
compatible = "fsl-i2c";
reg = <3000 100>;
interrupts = <e 8>;
- interrupt-parent = <700>;
+ interrupt-parent = < &ipic >;
dfsrr;
};
@@ -68,7 +68,7 @@
compatible = "fsl-i2c";
reg = <3100 100>;
interrupts = <f 8>;
- interrupt-parent = <700>;
+ interrupt-parent = < &ipic >;
dfsrr;
};
@@ -77,7 +77,7 @@
compatible = "mpc83xx_spi";
reg = <7000 1000>;
interrupts = <10 8>;
- interrupt-parent = <700>;
+ interrupt-parent = < &ipic >;
mode = <0>;
};
@@ -88,8 +88,8 @@
reg = <23000 1000>;
#address-cells = <1>;
#size-cells = <0>;
- interrupt-parent = <700>;
- interrupts = <26 2>;
+ interrupt-parent = < &ipic >;
+ interrupts = <26 8>;
phy_type = "utmi_wide";
};
@@ -99,18 +99,15 @@
reg = <24520 20>;
#address-cells = <1>;
#size-cells = <0>;
- linux,phandle = <24520>;
- ethernet-phy@1 {
- linux,phandle = <2452001>;
- interrupt-parent = <700>;
- interrupts = <13 2>;
+ phy1: ethernet-phy@1 {
+ interrupt-parent = < &ipic >;
+ interrupts = <13 8>;
reg = <1>;
device_type = "ethernet-phy";
};
- ethernet-phy@4 {
- linux,phandle = <2452004>;
- interrupt-parent = <700>;
- interrupts = <14 2>;
+ phy4: ethernet-phy@4 {
+ interrupt-parent = < &ipic >;
+ interrupts = <14 8>;
reg = <4>;
device_type = "ethernet-phy";
};
@@ -123,8 +120,8 @@
reg = <24000 1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <25 8 24 8 23 8>;
- interrupt-parent = <700>;
- phy-handle = <2452001>;
+ interrupt-parent = < &ipic >;
+ phy-handle = < &phy1 >;
};
ethernet@25000 {
@@ -134,8 +131,8 @@
reg = <25000 1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <22 8 21 8 20 8>;
- interrupt-parent = <700>;
- phy-handle = <2452004>;
+ interrupt-parent = < &ipic >;
+ phy-handle = < &phy4 >;
};
serial@4500 {
@@ -144,7 +141,7 @@
reg = <4500 100>;
clock-frequency = <0>;
interrupts = <9 8>;
- interrupt-parent = <700>;
+ interrupt-parent = < &ipic >;
};
serial@4600 {
@@ -153,7 +150,7 @@
reg = <4600 100>;
clock-frequency = <0>;
interrupts = <a 8>;
- interrupt-parent = <700>;
+ interrupt-parent = < &ipic >;
};
pci@8500 {
@@ -161,17 +158,17 @@
interrupt-map = <
/* IDSEL 0x0E -mini PCI */
- 7000 0 0 1 700 12 8
- 7000 0 0 2 700 12 8
- 7000 0 0 3 700 12 8
- 7000 0 0 4 700 12 8
+ 7000 0 0 1 &ipic 12 8
+ 7000 0 0 2 &ipic 12 8
+ 7000 0 0 3 &ipic 12 8
+ 7000 0 0 4 &ipic 12 8
/* IDSEL 0x0F - PCI slot */
- 7800 0 0 1 700 11 8
- 7800 0 0 2 700 12 8
- 7800 0 0 3 700 11 8
- 7800 0 0 4 700 12 8>;
- interrupt-parent = <700>;
+ 7800 0 0 1 &ipic 11 8
+ 7800 0 0 2 &ipic 12 8
+ 7800 0 0 3 &ipic 11 8
+ 7800 0 0 4 &ipic 12 8>;
+ interrupt-parent = < &ipic >;
interrupts = <42 8>;
bus-range = <0 0>;
ranges = <02000000 0 90000000 90000000 0 10000000
@@ -192,7 +189,7 @@
compatible = "talitos";
reg = <30000 7000>;
interrupts = <b 8>;
- interrupt-parent = <700>;
+ interrupt-parent = < &ipic >;
/* Rev. 2.2 */
num-channels = <1>;
channel-fifo-len = <18>;
@@ -206,8 +203,7 @@
* sense == 8: Level, low assertion
* sense == 2: Edge, high-to-low change
*/
- pic@700 {
- linux,phandle = <700>;
+ ipic: pic@700 {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
diff --git a/arch/powerpc/boot/dts/mpc8323emds.dts b/arch/powerpc/boot/dts/mpc832x_mds.dts
similarity index 77%
rename from arch/powerpc/boot/dts/mpc8323emds.dts
rename to arch/powerpc/boot/dts/mpc832x_mds.dts
index fa7ef24..06b3106 100644
--- a/arch/powerpc/boot/dts/mpc8323emds.dts
+++ b/arch/powerpc/boot/dts/mpc832x_mds.dts
@@ -11,16 +11,14 @@
/ {
model = "MPC8323EMDS";
- compatible = "MPC83xx";
+ compatible = "MPC8323EMDS", "MPC832xMDS", "MPC83xxMDS";
#address-cells = <1>;
#size-cells = <1>;
- linux,phandle = <100>;
cpus {
#cpus = <1>;
#address-cells = <1>;
#size-cells = <0>;
- linux,phandle = <200>;
PowerPC,8323@0 {
device_type = "cpu";
@@ -33,14 +31,11 @@
bus-frequency = <0>;
clock-frequency = <0>;
32-bit;
- linux,phandle = <201>;
- linux,boot-cpu;
};
};
memory {
device_type = "memory";
- linux,phandle = <300>;
reg = <00000000 08000000>;
};
@@ -69,7 +64,7 @@
compatible = "fsl-i2c";
reg = <3000 100>;
interrupts = <e 8>;
- interrupt-parent = <700>;
+ interrupt-parent = < &ipic >;
dfsrr;
};
@@ -79,7 +74,7 @@
reg = <4500 100>;
clock-frequency = <0>;
interrupts = <9 8>;
- interrupt-parent = <700>;
+ interrupt-parent = < &ipic >;
};
serial@4600 {
@@ -88,7 +83,7 @@
reg = <4600 100>;
clock-frequency = <0>;
interrupts = <a 8>;
- interrupt-parent = <700>;
+ interrupt-parent = < &ipic >;
};
crypto@30000 {
@@ -97,7 +92,7 @@
compatible = "talitos";
reg = <30000 7000>;
interrupts = <b 8>;
- interrupt-parent = <700>;
+ interrupt-parent = < &ipic >;
/* Rev. 2.2 */
num-channels = <1>;
channel-fifo-len = <18>;
@@ -106,51 +101,50 @@
};
pci@8500 {
- linux,phandle = <8500>;
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x11 AD17 */
- 8800 0 0 1 700 14 8
- 8800 0 0 2 700 15 8
- 8800 0 0 3 700 16 8
- 8800 0 0 4 700 17 8
+ 8800 0 0 1 &ipic 14 8
+ 8800 0 0 2 &ipic 15 8
+ 8800 0 0 3 &ipic 16 8
+ 8800 0 0 4 &ipic 17 8
/* IDSEL 0x12 AD18 */
- 9000 0 0 1 700 16 8
- 9000 0 0 2 700 17 8
- 9000 0 0 3 700 14 8
- 9000 0 0 4 700 15 8
+ 9000 0 0 1 &ipic 16 8
+ 9000 0 0 2 &ipic 17 8
+ 9000 0 0 3 &ipic 14 8
+ 9000 0 0 4 &ipic 15 8
/* IDSEL 0x13 AD19 */
- 9800 0 0 1 700 17 8
- 9800 0 0 2 700 14 8
- 9800 0 0 3 700 15 8
- 9800 0 0 4 700 16 8
+ 9800 0 0 1 &ipic 17 8
+ 9800 0 0 2 &ipic 14 8
+ 9800 0 0 3 &ipic 15 8
+ 9800 0 0 4 &ipic 16 8
/* IDSEL 0x15 AD21*/
- a800 0 0 1 700 14 8
- a800 0 0 2 700 15 8
- a800 0 0 3 700 16 8
- a800 0 0 4 700 17 8
+ a800 0 0 1 &ipic 14 8
+ a800 0 0 2 &ipic 15 8
+ a800 0 0 3 &ipic 16 8
+ a800 0 0 4 &ipic 17 8
/* IDSEL 0x16 AD22*/
- b000 0 0 1 700 17 8
- b000 0 0 2 700 14 8
- b000 0 0 3 700 15 8
- b000 0 0 4 700 16 8
+ b000 0 0 1 &ipic 17 8
+ b000 0 0 2 &ipic 14 8
+ b000 0 0 3 &ipic 15 8
+ b000 0 0 4 &ipic 16 8
/* IDSEL 0x17 AD23*/
- b800 0 0 1 700 16 8
- b800 0 0 2 700 17 8
- b800 0 0 3 700 14 8
- b800 0 0 4 700 15 8
+ b800 0 0 1 &ipic 16 8
+ b800 0 0 2 &ipic 17 8
+ b800 0 0 3 &ipic 14 8
+ b800 0 0 4 &ipic 15 8
/* IDSEL 0x18 AD24*/
- c000 0 0 1 700 15 8
- c000 0 0 2 700 16 8
- c000 0 0 3 700 17 8
- c000 0 0 4 700 14 8>;
- interrupt-parent = <700>;
+ c000 0 0 1 &ipic 15 8
+ c000 0 0 2 &ipic 16 8
+ c000 0 0 3 &ipic 17 8
+ c000 0 0 4 &ipic 14 8>;
+ interrupt-parent = < &ipic >;
interrupts = <42 8>;
bus-range = <0 0>;
ranges = <02000000 0 a0000000 90000000 0 10000000
@@ -165,8 +159,7 @@
device_type = "pci";
};
- pic@700 {
- linux,phandle = <700>;
+ ipic: pic@700 {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
@@ -180,8 +173,7 @@
device_type = "par_io";
num-ports = <7>;
- ucc_pin@03 {
- linux,phandle = <140003>;
+ pio3: ucc_pin@03 {
pio-map = <
/* port pin dir open_drain assignment has_irq */
3 4 3 0 2 0 /* MDIO */
@@ -204,8 +196,7 @@
1 c 1 0 1 0 /* TX_EN */
1 d 2 0 1 0>;/* CRS */
};
- ucc_pin@04 {
- linux,phandle = <140004>;
+ pio4: ucc_pin@04 {
pio-map = <
/* port pin dir open_drain assignment has_irq */
3 1f 2 0 1 0 /* RX_CLK (CLK7) */
@@ -252,7 +243,7 @@
compatible = "fsl_spi";
reg = <4c0 40>;
interrupts = <2>;
- interrupt-parent = <80>;
+ interrupt-parent = < &qeic >;
mode = "cpu";
};
@@ -261,7 +252,7 @@
compatible = "fsl_spi";
reg = <500 40>;
interrupts = <1>;
- interrupt-parent = <80>;
+ interrupt-parent = < &qeic >;
mode = "cpu";
};
@@ -270,7 +261,7 @@
compatible = "qe_udc";
reg = <6c0 40 8B00 100>;
interrupts = <b>;
- interrupt-parent = <80>;
+ interrupt-parent = < &qeic >;
mode = "slave";
};
@@ -281,12 +272,12 @@
device-id = <3>;
reg = <2200 200>;
interrupts = <22>;
- interrupt-parent = <80>;
+ interrupt-parent = < &qeic >;
mac-address = [ 00 04 9f 00 23 23 ];
rx-clock = <19>;
tx-clock = <1a>;
- phy-handle = <212003>;
- pio-handle = <140003>;
+ phy-handle = < &phy3 >;
+ pio-handle = < &pio3 >;
};
ucc@3200 {
@@ -296,12 +287,12 @@
device-id = <4>;
reg = <3000 200>;
interrupts = <23>;
- interrupt-parent = <80>;
+ interrupt-parent = < &qeic >;
mac-address = [ 00 11 22 33 44 55 ];
rx-clock = <17>;
tx-clock = <18>;
- phy-handle = <212004>;
- pio-handle = <140004>;
+ phy-handle = < &phy4 >;
+ pio-handle = < &pio4 >;
};
mdio@2320 {
@@ -311,26 +302,23 @@
device_type = "mdio";
compatible = "ucc_geth_phy";
- ethernet-phy@03 {
- linux,phandle = <212003>;
- interrupt-parent = <700>;
- interrupts = <11 2>;
+ phy3: ethernet-phy@03 {
+ interrupt-parent = < &ipic >;
+ interrupts = <11 8>;
reg = <3>;
device_type = "ethernet-phy";
interface = <3>; //ENET_100_MII
};
- ethernet-phy@04 {
- linux,phandle = <212004>;
- interrupt-parent = <700>;
- interrupts = <12 2>;
+ phy4: ethernet-phy@04 {
+ interrupt-parent = < &ipic >;
+ interrupts = <12 8>;
reg = <4>;
device_type = "ethernet-phy";
interface = <3>;
};
};
- qeic@80 {
- linux,phandle = <80>;
+ qeic: qeic@80 {
interrupt-controller;
device_type = "qeic";
#address-cells = <0>;
@@ -339,7 +327,7 @@
built-in;
big-endian;
interrupts = <20 8 21 8>; //high:32 low:33
- interrupt-parent = <700>;
+ interrupt-parent = < &ipic >;
};
};
};
diff --git a/arch/powerpc/boot/dts/mpc8349emitx.dts b/arch/powerpc/boot/dts/mpc8349emitx.dts
index 27807fc..61b550b 100644
--- a/arch/powerpc/boot/dts/mpc8349emitx.dts
+++ b/arch/powerpc/boot/dts/mpc8349emitx.dts
@@ -10,7 +10,7 @@
*/
/ {
model = "MPC8349EMITX";
- compatible = "MPC834xMITX";
+ compatible = "MPC8349EMITX", "MPC834xMITX", "MPC83xxMITX";
#address-cells = <1>;
#size-cells = <1>;
@@ -58,7 +58,7 @@
compatible = "fsl-i2c";
reg = <3000 100>;
interrupts = <e 8>;
- interrupt-parent = <700>;
+ interrupt-parent = < &ipic >;
dfsrr;
};
@@ -67,7 +67,7 @@
compatible = "fsl-i2c";
reg = <3100 100>;
interrupts = <f 8>;
- interrupt-parent = <700>;
+ interrupt-parent = < &ipic >;
dfsrr;
};
@@ -76,7 +76,7 @@
compatible = "mpc83xx_spi";
reg = <7000 1000>;
interrupts = <10 8>;
- interrupt-parent = <700>;
+ interrupt-parent = < &ipic >;
mode = <0>;
};
@@ -86,8 +86,8 @@
reg = <22000 1000>;
#address-cells = <1>;
#size-cells = <0>;
- interrupt-parent = <700>;
- interrupts = <27 2>;
+ interrupt-parent = < &ipic >;
+ interrupts = <27 8>;
phy_type = "ulpi";
port1;
};
@@ -98,8 +98,8 @@
reg = <23000 1000>;
#address-cells = <1>;
#size-cells = <0>;
- interrupt-parent = <700>;
- interrupts = <26 2>;
+ interrupt-parent = < &ipic >;
+ interrupts = <26 8>;
phy_type = "ulpi";
};
@@ -109,22 +109,19 @@
reg = <24520 20>;
#address-cells = <1>;
#size-cells = <0>;
- linux,phandle = <24520>;
/* Vitesse 8201 */
- ethernet-phy@1c {
- linux,phandle = <245201c>;
- interrupt-parent = <700>;
- interrupts = <12 2>;
+ phy1c: ethernet-phy@1c {
+ interrupt-parent = < &ipic >;
+ interrupts = <12 8>;
reg = <1c>;
device_type = "ethernet-phy";
};
/* Vitesse 7385 */
- ethernet-phy@1f {
- linux,phandle = <245201f>;
- interrupt-parent = <700>;
- interrupts = <12 2>;
+ phy1f: ethernet-phy@1f {
+ interrupt-parent = < &ipic >;
+ interrupts = <12 8>;
reg = <1f>;
device_type = "ethernet-phy";
};
@@ -138,8 +135,8 @@
address = [ 00 00 00 00 00 00 ];
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <20 8 21 8 22 8>;
- interrupt-parent = <700>;
- phy-handle = <245201c>;
+ interrupt-parent = < &ipic >;
+ phy-handle = < &phy1c >;
};
ethernet@25000 {
@@ -152,8 +149,8 @@
address = [ 00 00 00 00 00 00 ];
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <23 8 24 8 25 8>;
- interrupt-parent = <700>;
- phy-handle = <245201f>;
+ interrupt-parent = < &ipic >;
+ phy-handle = < &phy1f >;
};
serial@4500 {
@@ -162,7 +159,7 @@
reg = <4500 100>;
clock-frequency = <0>; // from bootloader
interrupts = <9 8>;
- interrupt-parent = <700>;
+ interrupt-parent = < &ipic >;
};
serial@4600 {
@@ -171,16 +168,16 @@
reg = <4600 100>;
clock-frequency = <0>; // from bootloader
interrupts = <a 8>;
- interrupt-parent = <700>;
+ interrupt-parent = < &ipic >;
};
pci@8500 {
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x10 - SATA */
- 8000 0 0 1 700 16 8 /* SATA_INTA */
+ 8000 0 0 1 &ipic 16 8 /* SATA_INTA */
>;
- interrupt-parent = <700>;
+ interrupt-parent = < &ipic >;
interrupts = <42 8>;
bus-range = <0 0>;
ranges = <42000000 0 80000000 80000000 0 10000000
@@ -199,13 +196,13 @@
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0E - MiniPCI Slot */
- 7000 0 0 1 700 15 8 /* PCI_INTA */
+ 7000 0 0 1 &ipic 15 8 /* PCI_INTA */
/* IDSEL 0x0F - PCI Slot */
- 7800 0 0 1 700 14 8 /* PCI_INTA */
- 7800 0 0 2 700 15 8 /* PCI_INTB */
+ 7800 0 0 1 &ipic 14 8 /* PCI_INTA */
+ 7800 0 0 2 &ipic 15 8 /* PCI_INTB */
>;
- interrupt-parent = <700>;
+ interrupt-parent = < &ipic >;
interrupts = <43 8>;
bus-range = <1 1>;
ranges = <42000000 0 a0000000 a0000000 0 10000000
@@ -226,15 +223,14 @@
compatible = "talitos";
reg = <30000 10000>;
interrupts = <b 8>;
- interrupt-parent = <700>;
+ interrupt-parent = < &ipic >;
num-channels = <4>;
channel-fifo-len = <18>;
exec-units-mask = <0000007e>;
descriptor-types-mask = <01010ebf>;
};
- pic@700 {
- linux,phandle = <700>;
+ ipic: pic@700 {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
diff --git a/arch/powerpc/boot/dts/mpc8349emitxgp.dts b/arch/powerpc/boot/dts/mpc8349emitxgp.dts
index 3190774..b2e1a5e 100644
--- a/arch/powerpc/boot/dts/mpc8349emitxgp.dts
+++ b/arch/powerpc/boot/dts/mpc8349emitxgp.dts
@@ -10,7 +10,7 @@
*/
/ {
model = "MPC8349EMITXGP";
- compatible = "MPC834xMITXGP";
+ compatible = "MPC8349EMITXGP", "MPC834xMITX", "MPC83xxMITX";
#address-cells = <1>;
#size-cells = <1>;
@@ -58,7 +58,7 @@
compatible = "fsl-i2c";
reg = <3000 100>;
interrupts = <e 8>;
- interrupt-parent = <700>;
+ interrupt-parent = < &ipic >;
dfsrr;
};
@@ -67,7 +67,7 @@
compatible = "fsl-i2c";
reg = <3100 100>;
interrupts = <f 8>;
- interrupt-parent = <700>;
+ interrupt-parent = < &ipic >;
dfsrr;
};
@@ -76,7 +76,7 @@
compatible = "mpc83xx_spi";
reg = <7000 1000>;
interrupts = <10 8>;
- interrupt-parent = <700>;
+ interrupt-parent = < &ipic >;
mode = <0>;
};
@@ -86,8 +86,8 @@
reg = <23000 1000>;
#address-cells = <1>;
#size-cells = <0>;
- interrupt-parent = <700>;
- interrupts = <26 2>;
+ interrupt-parent = < &ipic >;
+ interrupts = <26 8>;
dr_mode = "otg";
phy_type = "ulpi";
};
@@ -98,13 +98,11 @@
reg = <24520 20>;
#address-cells = <1>;
#size-cells = <0>;
- linux,phandle = <24520>;
/* Vitesse 8201 */
- ethernet-phy@1c {
- linux,phandle = <245201c>;
- interrupt-parent = <700>;
- interrupts = <12 2>;
+ phy1c: ethernet-phy@1c {
+ interrupt-parent = < &ipic >;
+ interrupts = <12 8>;
reg = <1c>;
device_type = "ethernet-phy";
};
@@ -117,8 +115,8 @@
reg = <24000 1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <20 8 21 8 22 8>;
- interrupt-parent = <700>;
- phy-handle = <245201c>;
+ interrupt-parent = < &ipic >;
+ phy-handle = < &phy1c >;
};
serial@4500 {
@@ -127,7 +125,7 @@
reg = <4500 100>;
clock-frequency = <0>; // from bootloader
interrupts = <9 8>;
- interrupt-parent = <700>;
+ interrupt-parent = < &ipic >;
};
serial@4600 {
@@ -136,17 +134,17 @@
reg = <4600 100>;
clock-frequency = <0>; // from bootloader
interrupts = <a 8>;
- interrupt-parent = <700>;
+ interrupt-parent = < &ipic >;
};
pci@8600 {
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0F - PCI Slot */
- 7800 0 0 1 700 14 8 /* PCI_INTA */
- 7800 0 0 2 700 15 8 /* PCI_INTB */
+ 7800 0 0 1 &ipic 14 8 /* PCI_INTA */
+ 7800 0 0 2 &ipic 15 8 /* PCI_INTB */
>;
- interrupt-parent = <700>;
+ interrupt-parent = < &ipic >;
interrupts = <43 8>;
bus-range = <1 1>;
ranges = <42000000 0 a0000000 a0000000 0 10000000
@@ -167,15 +165,14 @@
compatible = "talitos";
reg = <30000 10000>;
interrupts = <b 8>;
- interrupt-parent = <700>;
+ interrupt-parent = < &ipic >;
num-channels = <4>;
channel-fifo-len = <18>;
exec-units-mask = <0000007e>;
descriptor-types-mask = <01010ebf>;
};
- pic@700 {
- linux,phandle = <700>;
+ ipic: pic@700 {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
diff --git a/arch/powerpc/boot/dts/mpc834x_mds.dts b/arch/powerpc/boot/dts/mpc834x_mds.dts
index dc121b3..e4b43c2 100644
--- a/arch/powerpc/boot/dts/mpc834x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc834x_mds.dts
@@ -11,7 +11,7 @@
/ {
model = "MPC8349EMDS";
- compatible = "MPC834xMDS";
+ compatible = "MPC8349EMDS", "MPC834xMDS", "MPC83xxMDS";
#address-cells = <1>;
#size-cells = <1>;
@@ -64,7 +64,7 @@
compatible = "fsl-i2c";
reg = <3000 100>;
interrupts = <e 8>;
- interrupt-parent = <700>;
+ interrupt-parent = < &ipic >;
dfsrr;
};
@@ -73,7 +73,7 @@
compatible = "fsl-i2c";
reg = <3100 100>;
interrupts = <f 8>;
- interrupt-parent = <700>;
+ interrupt-parent = < &ipic >;
dfsrr;
};
@@ -82,7 +82,7 @@
compatible = "mpc83xx_spi";
reg = <7000 1000>;
interrupts = <10 8>;
- interrupt-parent = <700>;
+ interrupt-parent = < &ipic >;
mode = <0>;
};
@@ -94,8 +94,8 @@
reg = <22000 1000>;
#address-cells = <1>;
#size-cells = <0>;
- interrupt-parent = <700>;
- interrupts = <27 2>;
+ interrupt-parent = < &ipic >;
+ interrupts = <27 8>;
phy_type = "ulpi";
port1;
};
@@ -106,8 +106,8 @@
reg = <23000 1000>;
#address-cells = <1>;
#size-cells = <0>;
- interrupt-parent = <700>;
- interrupts = <26 2>;
+ interrupt-parent = < &ipic >;
+ interrupts = <26 8>;
dr_mode = "otg";
phy_type = "ulpi";
};
@@ -118,18 +118,15 @@
reg = <24520 20>;
#address-cells = <1>;
#size-cells = <0>;
- linux,phandle = <24520>;
- ethernet-phy@0 {
- linux,phandle = <2452000>;
- interrupt-parent = <700>;
- interrupts = <11 2>;
+ phy0: ethernet-phy@0 {
+ interrupt-parent = < &ipic >;
+ interrupts = <11 8>;
reg = <0>;
device_type = "ethernet-phy";
};
- ethernet-phy@1 {
- linux,phandle = <2452001>;
- interrupt-parent = <700>;
- interrupts = <12 2>;
+ phy1: ethernet-phy@1 {
+ interrupt-parent = < &ipic >;
+ interrupts = <12 8>;
reg = <1>;
device_type = "ethernet-phy";
};
@@ -143,8 +140,8 @@
address = [ 00 00 00 00 00 00 ];
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <20 8 21 8 22 8>;
- interrupt-parent = <700>;
- phy-handle = <2452000>;
+ interrupt-parent = < &ipic >;
+ phy-handle = < &phy0 >;
};
ethernet@25000 {
@@ -157,8 +154,8 @@
address = [ 00 00 00 00 00 00 ];
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <23 8 24 8 25 8>;
- interrupt-parent = <700>;
- phy-handle = <2452001>;
+ interrupt-parent = < &ipic >;
+ phy-handle = < &phy1 >;
};
serial@4500 {
@@ -167,7 +164,7 @@
reg = <4500 100>;
clock-frequency = <0>;
interrupts = <9 8>;
- interrupt-parent = <700>;
+ interrupt-parent = < &ipic >;
};
serial@4600 {
@@ -176,7 +173,7 @@
reg = <4600 100>;
clock-frequency = <0>;
interrupts = <a 8>;
- interrupt-parent = <700>;
+ interrupt-parent = < &ipic >;
};
pci@8500 {
@@ -184,47 +181,47 @@
interrupt-map = <
/* IDSEL 0x11 */
- 8800 0 0 1 700 14 8
- 8800 0 0 2 700 15 8
- 8800 0 0 3 700 16 8
- 8800 0 0 4 700 17 8
+ 8800 0 0 1 &ipic 14 8
+ 8800 0 0 2 &ipic 15 8
+ 8800 0 0 3 &ipic 16 8
+ 8800 0 0 4 &ipic 17 8
/* IDSEL 0x12 */
- 9000 0 0 1 700 16 8
- 9000 0 0 2 700 17 8
- 9000 0 0 3 700 14 8
- 9000 0 0 4 700 15 8
+ 9000 0 0 1 &ipic 16 8
+ 9000 0 0 2 &ipic 17 8
+ 9000 0 0 3 &ipic 14 8
+ 9000 0 0 4 &ipic 15 8
/* IDSEL 0x13 */
- 9800 0 0 1 700 17 8
- 9800 0 0 2 700 14 8
- 9800 0 0 3 700 15 8
- 9800 0 0 4 700 16 8
+ 9800 0 0 1 &ipic 17 8
+ 9800 0 0 2 &ipic 14 8
+ 9800 0 0 3 &ipic 15 8
+ 9800 0 0 4 &ipic 16 8
/* IDSEL 0x15 */
- a800 0 0 1 700 14 8
- a800 0 0 2 700 15 8
- a800 0 0 3 700 16 8
- a800 0 0 4 700 17 8
+ a800 0 0 1 &ipic 14 8
+ a800 0 0 2 &ipic 15 8
+ a800 0 0 3 &ipic 16 8
+ a800 0 0 4 &ipic 17 8
/* IDSEL 0x16 */
- b000 0 0 1 700 17 8
- b000 0 0 2 700 14 8
- b000 0 0 3 700 15 8
- b000 0 0 4 700 16 8
+ b000 0 0 1 &ipic 17 8
+ b000 0 0 2 &ipic 14 8
+ b000 0 0 3 &ipic 15 8
+ b000 0 0 4 &ipic 16 8
/* IDSEL 0x17 */
- b800 0 0 1 700 16 8
- b800 0 0 2 700 17 8
- b800 0 0 3 700 14 8
- b800 0 0 4 700 15 8
+ b800 0 0 1 &ipic 16 8
+ b800 0 0 2 &ipic 17 8
+ b800 0 0 3 &ipic 14 8
+ b800 0 0 4 &ipic 15 8
/* IDSEL 0x18 */
- c000 0 0 1 700 15 8
- c000 0 0 2 700 16 8
- c000 0 0 3 700 17 8
- c000 0 0 4 700 14 8>;
- interrupt-parent = <700>;
+ c000 0 0 1 &ipic 15 8
+ c000 0 0 2 &ipic 16 8
+ c000 0 0 3 &ipic 17 8
+ c000 0 0 4 &ipic 14 8>;
+ interrupt-parent = < &ipic >;
interrupts = <42 8>;
bus-range = <0 0>;
ranges = <02000000 0 a0000000 a0000000 0 10000000
@@ -244,47 +241,47 @@
interrupt-map = <
/* IDSEL 0x11 */
- 8800 0 0 1 700 14 8
- 8800 0 0 2 700 15 8
- 8800 0 0 3 700 16 8
- 8800 0 0 4 700 17 8
+ 8800 0 0 1 &ipic 14 8
+ 8800 0 0 2 &ipic 15 8
+ 8800 0 0 3 &ipic 16 8
+ 8800 0 0 4 &ipic 17 8
/* IDSEL 0x12 */
- 9000 0 0 1 700 16 8
- 9000 0 0 2 700 17 8
- 9000 0 0 3 700 14 8
- 9000 0 0 4 700 15 8
+ 9000 0 0 1 &ipic 16 8
+ 9000 0 0 2 &ipic 17 8
+ 9000 0 0 3 &ipic 14 8
+ 9000 0 0 4 &ipic 15 8
/* IDSEL 0x13 */
- 9800 0 0 1 700 17 8
- 9800 0 0 2 700 14 8
- 9800 0 0 3 700 15 8
- 9800 0 0 4 700 16 8
+ 9800 0 0 1 &ipic 17 8
+ 9800 0 0 2 &ipic 14 8
+ 9800 0 0 3 &ipic 15 8
+ 9800 0 0 4 &ipic 16 8
/* IDSEL 0x15 */
- a800 0 0 1 700 14 8
- a800 0 0 2 700 15 8
- a800 0 0 3 700 16 8
- a800 0 0 4 700 17 8
+ a800 0 0 1 &ipic 14 8
+ a800 0 0 2 &ipic 15 8
+ a800 0 0 3 &ipic 16 8
+ a800 0 0 4 &ipic 17 8
/* IDSEL 0x16 */
- b000 0 0 1 700 17 8
- b000 0 0 2 700 14 8
- b000 0 0 3 700 15 8
- b000 0 0 4 700 16 8
+ b000 0 0 1 &ipic 17 8
+ b000 0 0 2 &ipic 14 8
+ b000 0 0 3 &ipic 15 8
+ b000 0 0 4 &ipic 16 8
/* IDSEL 0x17 */
- b800 0 0 1 700 16 8
- b800 0 0 2 700 17 8
- b800 0 0 3 700 14 8
- b800 0 0 4 700 15 8
+ b800 0 0 1 &ipic 16 8
+ b800 0 0 2 &ipic 17 8
+ b800 0 0 3 &ipic 14 8
+ b800 0 0 4 &ipic 15 8
/* IDSEL 0x18 */
- c000 0 0 1 700 15 8
- c000 0 0 2 700 16 8
- c000 0 0 3 700 17 8
- c000 0 0 4 700 14 8>;
- interrupt-parent = <700>;
+ c000 0 0 1 &ipic 15 8
+ c000 0 0 2 &ipic 16 8
+ c000 0 0 3 &ipic 17 8
+ c000 0 0 4 &ipic 14 8>;
+ interrupt-parent = < &ipic >;
interrupts = <42 8>;
bus-range = <0 0>;
ranges = <02000000 0 b0000000 b0000000 0 10000000
@@ -306,7 +303,7 @@
compatible = "talitos";
reg = <30000 10000>;
interrupts = <b 8>;
- interrupt-parent = <700>;
+ interrupt-parent = < &ipic >;
num-channels = <4>;
channel-fifo-len = <18>;
exec-units-mask = <0000007e>;
@@ -321,8 +318,7 @@
* sense == 8: Level, low assertion
* sense == 2: Edge, high-to-low change
*/
- pic@700 {
- linux,phandle = <700>;
+ ipic: pic@700 {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
diff --git a/arch/powerpc/boot/dts/mpc8360emds.dts b/arch/powerpc/boot/dts/mpc836x_mds.dts
similarity index 79%
rename from arch/powerpc/boot/dts/mpc8360emds.dts
rename to arch/powerpc/boot/dts/mpc836x_mds.dts
index 9022192..4fe45c0 100644
--- a/arch/powerpc/boot/dts/mpc8360emds.dts
+++ b/arch/powerpc/boot/dts/mpc836x_mds.dts
@@ -15,17 +15,15 @@
*/
/ {
- model = "MPC8360EPB";
- compatible = "MPC83xx";
+ model = "MPC8360MDS";
+ compatible = "MPC8360EMDS", "MPC836xMDS", "MPC83xxMDS";
#address-cells = <1>;
#size-cells = <1>;
- linux,phandle = <100>;
cpus {
#cpus = <1>;
#address-cells = <1>;
#size-cells = <0>;
- linux,phandle = <200>;
PowerPC,8360@0 {
device_type = "cpu";
@@ -38,14 +36,11 @@
bus-frequency = <FBC5200>;
clock-frequency = <1F78A400>;
32-bit;
- linux,phandle = <201>;
- linux,boot-cpu;
};
};
memory {
device_type = "memory";
- linux,phandle = <300>;
reg = <00000000 10000000>;
};
@@ -74,7 +69,7 @@
compatible = "fsl-i2c";
reg = <3000 100>;
interrupts = <e 8>;
- interrupt-parent = <700>;
+ interrupt-parent = < &ipic >;
dfsrr;
};
@@ -83,7 +78,7 @@
compatible = "fsl-i2c";
reg = <3100 100>;
interrupts = <f 8>;
- interrupt-parent = <700>;
+ interrupt-parent = < &ipic >;
dfsrr;
};
@@ -93,7 +88,7 @@
reg = <4500 100>;
clock-frequency = <FBC5200>;
interrupts = <9 8>;
- interrupt-parent = <700>;
+ interrupt-parent = < &ipic >;
};
serial@4600 {
@@ -102,7 +97,7 @@
reg = <4600 100>;
clock-frequency = <FBC5200>;
interrupts = <a 8>;
- interrupt-parent = <700>;
+ interrupt-parent = < &ipic >;
};
crypto@30000 {
@@ -111,7 +106,7 @@
compatible = "talitos";
reg = <30000 10000>;
interrupts = <b 8>;
- interrupt-parent = <700>;
+ interrupt-parent = < &ipic >;
num-channels = <4>;
channel-fifo-len = <18>;
exec-units-mask = <0000007e>;
@@ -120,52 +115,51 @@
};
pci@8500 {
- linux,phandle = <8500>;
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x11 AD17 */
- 8800 0 0 1 700 14 8
- 8800 0 0 2 700 15 8
- 8800 0 0 3 700 16 8
- 8800 0 0 4 700 17 8
+ 8800 0 0 1 &ipic 14 8
+ 8800 0 0 2 &ipic 15 8
+ 8800 0 0 3 &ipic 16 8
+ 8800 0 0 4 &ipic 17 8
/* IDSEL 0x12 AD18 */
- 9000 0 0 1 700 16 8
- 9000 0 0 2 700 17 8
- 9000 0 0 3 700 14 8
- 9000 0 0 4 700 15 8
+ 9000 0 0 1 &ipic 16 8
+ 9000 0 0 2 &ipic 17 8
+ 9000 0 0 3 &ipic 14 8
+ 9000 0 0 4 &ipic 15 8
/* IDSEL 0x13 AD19 */
- 9800 0 0 1 700 17 8
- 9800 0 0 2 700 14 8
- 9800 0 0 3 700 15 8
- 9800 0 0 4 700 16 8
+ 9800 0 0 1 &ipic 17 8
+ 9800 0 0 2 &ipic 14 8
+ 9800 0 0 3 &ipic 15 8
+ 9800 0 0 4 &ipic 16 8
/* IDSEL 0x15 AD21*/
- a800 0 0 1 700 14 8
- a800 0 0 2 700 15 8
- a800 0 0 3 700 16 8
- a800 0 0 4 700 17 8
+ a800 0 0 1 &ipic 14 8
+ a800 0 0 2 &ipic 15 8
+ a800 0 0 3 &ipic 16 8
+ a800 0 0 4 &ipic 17 8
/* IDSEL 0x16 AD22*/
- b000 0 0 1 700 17 8
- b000 0 0 2 700 14 8
- b000 0 0 3 700 15 8
- b000 0 0 4 700 16 8
+ b000 0 0 1 &ipic 17 8
+ b000 0 0 2 &ipic 14 8
+ b000 0 0 3 &ipic 15 8
+ b000 0 0 4 &ipic 16 8
/* IDSEL 0x17 AD23*/
- b800 0 0 1 700 16 8
- b800 0 0 2 700 17 8
- b800 0 0 3 700 14 8
- b800 0 0 4 700 15 8
+ b800 0 0 1 &ipic 16 8
+ b800 0 0 2 &ipic 17 8
+ b800 0 0 3 &ipic 14 8
+ b800 0 0 4 &ipic 15 8
/* IDSEL 0x18 AD24*/
- c000 0 0 1 700 15 8
- c000 0 0 2 700 16 8
- c000 0 0 3 700 17 8
- c000 0 0 4 700 14 8>;
- interrupt-parent = <700>;
+ c000 0 0 1 &ipic 15 8
+ c000 0 0 2 &ipic 16 8
+ c000 0 0 3 &ipic 17 8
+ c000 0 0 4 &ipic 14 8>;
+ interrupt-parent = < &ipic >;
interrupts = <42 8>;
bus-range = <0 0>;
ranges = <02000000 0 a0000000 a0000000 0 10000000
@@ -180,8 +174,7 @@
device_type = "pci";
};
- pic@700 {
- linux,phandle = <700>;
+ ipic: pic@700 {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
@@ -195,8 +188,7 @@
device_type = "par_io";
num-ports = <7>;
- ucc_pin@01 {
- linux,phandle = <140001>;
+ pio1: ucc_pin@01 {
pio-map = <
/* port pin dir open_drain assignment has_irq */
0 3 1 0 1 0 /* TxD0 */
@@ -223,8 +215,7 @@
2 9 1 0 3 0 /* GTX_CLK - CLK10 */
2 8 2 0 1 0>; /* GTX125 - CLK9 */
};
- ucc_pin@02 {
- linux,phandle = <140002>;
+ pio2: ucc_pin@02 {
pio-map = <
/* port pin dir open_drain assignment has_irq */
0 11 1 0 1 0 /* TxD0 */
@@ -281,7 +272,7 @@
compatible = "fsl_spi";
reg = <4c0 40>;
interrupts = <2>;
- interrupt-parent = <80>;
+ interrupt-parent = < &qeic >;
mode = "cpu";
};
@@ -290,7 +281,7 @@
compatible = "fsl_spi";
reg = <500 40>;
interrupts = <1>;
- interrupt-parent = <80>;
+ interrupt-parent = < &qeic >;
mode = "cpu";
};
@@ -299,7 +290,7 @@
compatible = "qe_udc";
reg = <6c0 40 8B00 100>;
interrupts = <b>;
- interrupt-parent = <80>;
+ interrupt-parent = < &qeic >;
mode = "slave";
};
@@ -310,12 +301,12 @@
device-id = <1>;
reg = <2000 200>;
interrupts = <20>;
- interrupt-parent = <80>;
+ interrupt-parent = < &qeic >;
mac-address = [ 00 04 9f 00 23 23 ];
rx-clock = <0>;
tx-clock = <19>;
- phy-handle = <212000>;
- pio-handle = <140001>;
+ phy-handle = < &phy0 >;
+ pio-handle = < &pio1 >;
};
ucc@3000 {
@@ -325,12 +316,12 @@
device-id = <2>;
reg = <3000 200>;
interrupts = <21>;
- interrupt-parent = <80>;
+ interrupt-parent = < &qeic >;
mac-address = [ 00 11 22 33 44 55 ];
rx-clock = <0>;
tx-clock = <14>;
- phy-handle = <212001>;
- pio-handle = <140002>;
+ phy-handle = < &phy1 >;
+ pio-handle = < &pio2 >;
};
mdio@2120 {
@@ -340,26 +331,23 @@
device_type = "mdio";
compatible = "ucc_geth_phy";
- ethernet-phy@00 {
- linux,phandle = <212000>;
- interrupt-parent = <700>;
- interrupts = <11 2>;
+ phy0: ethernet-phy@00 {
+ interrupt-parent = < &ipic >;
+ interrupts = <11 8>;
reg = <0>;
device_type = "ethernet-phy";
interface = <6>; //ENET_1000_GMII
};
- ethernet-phy@01 {
- linux,phandle = <212001>;
- interrupt-parent = <700>;
- interrupts = <12 2>;
+ phy1: ethernet-phy@01 {
+ interrupt-parent = < &ipic >;
+ interrupts = <12 8>;
reg = <1>;
device_type = "ethernet-phy";
interface = <6>;
};
};
- qeic@80 {
- linux,phandle = <80>;
+ qeic: qeic@80 {
interrupt-controller;
device_type = "qeic";
#address-cells = <0>;
@@ -368,7 +356,7 @@
built-in;
big-endian;
interrupts = <20 8 21 8>; //high:32 low:33
- interrupt-parent = <700>;
+ interrupt-parent = < &ipic >;
};
};
diff --git a/arch/powerpc/boot/dts/mpc8540ads.dts b/arch/powerpc/boot/dts/mpc8540ads.dts
index 5f41c1f..3c0917f 100644
--- a/arch/powerpc/boot/dts/mpc8540ads.dts
+++ b/arch/powerpc/boot/dts/mpc8540ads.dts
@@ -12,16 +12,14 @@
/ {
model = "MPC8540ADS";
- compatible = "MPC85xxADS";
+ compatible = "MPC8540ADS", "MPC85xxADS";
#address-cells = <1>;
#size-cells = <1>;
- linux,phandle = <100>;
cpus {
#cpus = <1>;
#address-cells = <1>;
#size-cells = <0>;
- linux,phandle = <200>;
PowerPC,8540@0 {
device_type = "cpu";
@@ -34,13 +32,11 @@
bus-frequency = <0>; // 166 MHz
clock-frequency = <0>; // 825 MHz, from uboot
32-bit;
- linux,phandle = <201>;
};
};
memory {
device_type = "memory";
- linux,phandle = <300>;
reg = <00000000 08000000>; // 128M at 0x0
};
@@ -58,7 +54,7 @@
compatible = "fsl-i2c";
reg = <3000 100>;
interrupts = <1b 2>;
- interrupt-parent = <40000>;
+ interrupt-parent = <&mpic>;
dfsrr;
};
@@ -68,24 +64,20 @@
device_type = "mdio";
compatible = "gianfar";
reg = <24520 20>;
- linux,phandle = <24520>;
- ethernet-phy@0 {
- linux,phandle = <2452000>;
- interrupt-parent = <40000>;
+ phy0: ethernet-phy@0 {
+ interrupt-parent = <&mpic>;
interrupts = <35 1>;
reg = <0>;
device_type = "ethernet-phy";
};
- ethernet-phy@1 {
- linux,phandle = <2452001>;
- interrupt-parent = <40000>;
+ phy1: ethernet-phy@1 {
+ interrupt-parent = <&mpic>;
interrupts = <35 1>;
reg = <1>;
device_type = "ethernet-phy";
};
- ethernet-phy@3 {
- linux,phandle = <2452003>;
- interrupt-parent = <40000>;
+ phy3: ethernet-phy@3 {
+ interrupt-parent = <&mpic>;
interrupts = <37 1>;
reg = <3>;
device_type = "ethernet-phy";
@@ -102,8 +94,8 @@
address = [ 00 E0 0C 00 73 00 ];
local-mac-address = [ 00 E0 0C 00 73 00 ];
interrupts = <d 2 e 2 12 2>;
- interrupt-parent = <40000>;
- phy-handle = <2452000>;
+ interrupt-parent = <&mpic>;
+ phy-handle = <&phy0>;
};
ethernet@25000 {
@@ -116,8 +108,8 @@
address = [ 00 E0 0C 00 73 01 ];
local-mac-address = [ 00 E0 0C 00 73 01 ];
interrupts = <13 2 14 2 18 2>;
- interrupt-parent = <40000>;
- phy-handle = <2452001>;
+ interrupt-parent = <&mpic>;
+ phy-handle = <&phy1>;
};
ethernet@26000 {
@@ -130,8 +122,8 @@
address = [ 00 E0 0C 00 73 02 ];
local-mac-address = [ 00 E0 0C 00 73 02 ];
interrupts = <19 2>;
- interrupt-parent = <40000>;
- phy-handle = <2452003>;
+ interrupt-parent = <&mpic>;
+ phy-handle = <&phy3>;
};
serial@4500 {
@@ -140,7 +132,7 @@
reg = <4500 100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
interrupts = <1a 2>;
- interrupt-parent = <40000>;
+ interrupt-parent = <&mpic>;
};
serial@4600 {
@@ -149,85 +141,84 @@
reg = <4600 100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
interrupts = <1a 2>;
- interrupt-parent = <40000>;
+ interrupt-parent = <&mpic>;
};
pci@8000 {
- linux,phandle = <8000>;
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x02 */
- 1000 0 0 1 40000 31 1
- 1000 0 0 2 40000 32 1
- 1000 0 0 3 40000 33 1
- 1000 0 0 4 40000 34 1
+ 1000 0 0 1 &mpic 31 1
+ 1000 0 0 2 &mpic 32 1
+ 1000 0 0 3 &mpic 33 1
+ 1000 0 0 4 &mpic 34 1
/* IDSEL 0x03 */
- 1800 0 0 1 40000 34 1
- 1800 0 0 2 40000 31 1
- 1800 0 0 3 40000 32 1
- 1800 0 0 4 40000 33 1
+ 1800 0 0 1 &mpic 34 1
+ 1800 0 0 2 &mpic 31 1
+ 1800 0 0 3 &mpic 32 1
+ 1800 0 0 4 &mpic 33 1
/* IDSEL 0x04 */
- 2000 0 0 1 40000 33 1
- 2000 0 0 2 40000 34 1
- 2000 0 0 3 40000 31 1
- 2000 0 0 4 40000 32 1
+ 2000 0 0 1 &mpic 33 1
+ 2000 0 0 2 &mpic 34 1
+ 2000 0 0 3 &mpic 31 1
+ 2000 0 0 4 &mpic 32 1
/* IDSEL 0x05 */
- 2800 0 0 1 40000 32 1
- 2800 0 0 2 40000 33 1
- 2800 0 0 3 40000 34 1
- 2800 0 0 4 40000 31 1
+ 2800 0 0 1 &mpic 32 1
+ 2800 0 0 2 &mpic 33 1
+ 2800 0 0 3 &mpic 34 1
+ 2800 0 0 4 &mpic 31 1
/* IDSEL 0x0c */
- 6000 0 0 1 40000 31 1
- 6000 0 0 2 40000 32 1
- 6000 0 0 3 40000 33 1
- 6000 0 0 4 40000 34 1
+ 6000 0 0 1 &mpic 31 1
+ 6000 0 0 2 &mpic 32 1
+ 6000 0 0 3 &mpic 33 1
+ 6000 0 0 4 &mpic 34 1
/* IDSEL 0x0d */
- 6800 0 0 1 40000 34 1
- 6800 0 0 2 40000 31 1
- 6800 0 0 3 40000 32 1
- 6800 0 0 4 40000 33 1
+ 6800 0 0 1 &mpic 34 1
+ 6800 0 0 2 &mpic 31 1
+ 6800 0 0 3 &mpic 32 1
+ 6800 0 0 4 &mpic 33 1
/* IDSEL 0x0e */
- 7000 0 0 1 40000 33 1
- 7000 0 0 2 40000 34 1
- 7000 0 0 3 40000 31 1
- 7000 0 0 4 40000 32 1
+ 7000 0 0 1 &mpic 33 1
+ 7000 0 0 2 &mpic 34 1
+ 7000 0 0 3 &mpic 31 1
+ 7000 0 0 4 &mpic 32 1
/* IDSEL 0x0f */
- 7800 0 0 1 40000 32 1
- 7800 0 0 2 40000 33 1
- 7800 0 0 3 40000 34 1
- 7800 0 0 4 40000 31 1
+ 7800 0 0 1 &mpic 32 1
+ 7800 0 0 2 &mpic 33 1
+ 7800 0 0 3 &mpic 34 1
+ 7800 0 0 4 &mpic 31 1
/* IDSEL 0x12 */
- 9000 0 0 1 40000 31 1
- 9000 0 0 2 40000 32 1
- 9000 0 0 3 40000 33 1
- 9000 0 0 4 40000 34 1
+ 9000 0 0 1 &mpic 31 1
+ 9000 0 0 2 &mpic 32 1
+ 9000 0 0 3 &mpic 33 1
+ 9000 0 0 4 &mpic 34 1
/* IDSEL 0x13 */
- 9800 0 0 1 40000 34 1
- 9800 0 0 2 40000 31 1
- 9800 0 0 3 40000 32 1
- 9800 0 0 4 40000 33 1
+ 9800 0 0 1 &mpic 34 1
+ 9800 0 0 2 &mpic 31 1
+ 9800 0 0 3 &mpic 32 1
+ 9800 0 0 4 &mpic 33 1
/* IDSEL 0x14 */
- a000 0 0 1 40000 33 1
- a000 0 0 2 40000 34 1
- a000 0 0 3 40000 31 1
- a000 0 0 4 40000 32 1
+ a000 0 0 1 &mpic 33 1
+ a000 0 0 2 &mpic 34 1
+ a000 0 0 3 &mpic 31 1
+ a000 0 0 4 &mpic 32 1
/* IDSEL 0x15 */
- a800 0 0 1 40000 32 1
- a800 0 0 2 40000 33 1
- a800 0 0 3 40000 34 1
- a800 0 0 4 40000 31 1>;
- interrupt-parent = <40000>;
+ a800 0 0 1 &mpic 32 1
+ a800 0 0 2 &mpic 33 1
+ a800 0 0 3 &mpic 34 1
+ a800 0 0 4 &mpic 31 1>;
+ interrupt-parent = <&mpic>;
interrupts = <08 2>;
bus-range = <0 0>;
ranges = <02000000 0 80000000 80000000 0 20000000
@@ -241,8 +232,7 @@
device_type = "pci";
};
- pic@40000 {
- linux,phandle = <40000>;
+ mpic: pic@40000 {
clock-frequency = <0>;
interrupt-controller;
#address-cells = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8541cds.dts b/arch/powerpc/boot/dts/mpc8541cds.dts
index 7be0bc6..2a1ae76 100644
--- a/arch/powerpc/boot/dts/mpc8541cds.dts
+++ b/arch/powerpc/boot/dts/mpc8541cds.dts
@@ -12,16 +12,14 @@
/ {
model = "MPC8541CDS";
- compatible = "MPC85xxCDS";
+ compatible = "MPC8541CDS", "MPC85xxCDS";
#address-cells = <1>;
#size-cells = <1>;
- linux,phandle = <100>;
cpus {
#cpus = <1>;
#address-cells = <1>;
#size-cells = <0>;
- linux,phandle = <200>;
PowerPC,8541@0 {
device_type = "cpu";
@@ -34,13 +32,11 @@
bus-frequency = <0>; // 166 MHz
clock-frequency = <0>; // 825 MHz, from uboot
32-bit;
- linux,phandle = <201>;
};
};
memory {
device_type = "memory";
- linux,phandle = <300>;
reg = <00000000 08000000>; // 128M at 0x0
};
@@ -58,7 +54,7 @@
compatible = "fsl-i2c";
reg = <3000 100>;
interrupts = <1b 2>;
- interrupt-parent = <40000>;
+ interrupt-parent = <&mpic>;
dfsrr;
};
@@ -68,17 +64,14 @@
device_type = "mdio";
compatible = "gianfar";
reg = <24520 20>;
- linux,phandle = <24520>;
- ethernet-phy@0 {
- linux,phandle = <2452000>;
- interrupt-parent = <40000>;
+ phy0: ethernet-phy@0 {
+ interrupt-parent = <&mpic>;
interrupts = <35 0>;
reg = <0>;
device_type = "ethernet-phy";
};
- ethernet-phy@1 {
- linux,phandle = <2452001>;
- interrupt-parent = <40000>;
+ phy1: ethernet-phy@1 {
+ interrupt-parent = <&mpic>;
interrupts = <35 0>;
reg = <1>;
device_type = "ethernet-phy";
@@ -94,8 +87,8 @@
reg = <24000 1000>;
local-mac-address = [ 00 E0 0C 00 73 00 ];
interrupts = <d 2 e 2 12 2>;
- interrupt-parent = <40000>;
- phy-handle = <2452000>;
+ interrupt-parent = <&mpic>;
+ phy-handle = <&phy0>;
};
ethernet@25000 {
@@ -107,8 +100,8 @@
reg = <25000 1000>;
local-mac-address = [ 00 E0 0C 00 73 01 ];
interrupts = <13 2 14 2 18 2>;
- interrupt-parent = <40000>;
- phy-handle = <2452001>;
+ interrupt-parent = <&mpic>;
+ phy-handle = <&phy1>;
};
serial@4500 {
@@ -117,7 +110,7 @@
reg = <4500 100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
interrupts = <1a 2>;
- interrupt-parent = <40000>;
+ interrupt-parent = <&mpic>;
};
serial@4600 {
@@ -126,57 +119,56 @@
reg = <4600 100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
interrupts = <1a 2>;
- interrupt-parent = <40000>;
+ interrupt-parent = <&mpic>;
};
- pci@8000 {
- linux,phandle = <8000>;
+ pci1: pci@8000 {
interrupt-map-mask = <1f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x10 */
- 08000 0 0 1 40000 30 1
- 08000 0 0 2 40000 31 1
- 08000 0 0 3 40000 32 1
- 08000 0 0 4 40000 33 1
+ 08000 0 0 1 &mpic 30 1
+ 08000 0 0 2 &mpic 31 1
+ 08000 0 0 3 &mpic 32 1
+ 08000 0 0 4 &mpic 33 1
/* IDSEL 0x11 */
- 08800 0 0 1 40000 30 1
- 08800 0 0 2 40000 31 1
- 08800 0 0 3 40000 32 1
- 08800 0 0 4 40000 33 1
+ 08800 0 0 1 &mpic 30 1
+ 08800 0 0 2 &mpic 31 1
+ 08800 0 0 3 &mpic 32 1
+ 08800 0 0 4 &mpic 33 1
/* IDSEL 0x12 (Slot 1) */
- 09000 0 0 1 40000 30 1
- 09000 0 0 2 40000 31 1
- 09000 0 0 3 40000 32 1
- 09000 0 0 4 40000 33 1
+ 09000 0 0 1 &mpic 30 1
+ 09000 0 0 2 &mpic 31 1
+ 09000 0 0 3 &mpic 32 1
+ 09000 0 0 4 &mpic 33 1
/* IDSEL 0x13 (Slot 2) */
- 09800 0 0 1 40000 31 1
- 09800 0 0 2 40000 32 1
- 09800 0 0 3 40000 33 1
- 09800 0 0 4 40000 30 1
+ 09800 0 0 1 &mpic 31 1
+ 09800 0 0 2 &mpic 32 1
+ 09800 0 0 3 &mpic 33 1
+ 09800 0 0 4 &mpic 30 1
/* IDSEL 0x14 (Slot 3) */
- 0a000 0 0 1 40000 32 1
- 0a000 0 0 2 40000 33 1
- 0a000 0 0 3 40000 30 1
- 0a000 0 0 4 40000 31 1
+ 0a000 0 0 1 &mpic 32 1
+ 0a000 0 0 2 &mpic 33 1
+ 0a000 0 0 3 &mpic 30 1
+ 0a000 0 0 4 &mpic 31 1
/* IDSEL 0x15 (Slot 4) */
- 0a800 0 0 1 40000 33 1
- 0a800 0 0 2 40000 30 1
- 0a800 0 0 3 40000 31 1
- 0a800 0 0 4 40000 32 1
+ 0a800 0 0 1 &mpic 33 1
+ 0a800 0 0 2 &mpic 30 1
+ 0a800 0 0 3 &mpic 31 1
+ 0a800 0 0 4 &mpic 32 1
/* Bus 1 (Tundra Bridge) */
/* IDSEL 0x12 (ISA bridge) */
- 19000 0 0 1 40000 30 1
- 19000 0 0 2 40000 31 1
- 19000 0 0 3 40000 32 1
- 19000 0 0 4 40000 33 1>;
- interrupt-parent = <40000>;
+ 19000 0 0 1 &mpic 30 1
+ 19000 0 0 2 &mpic 31 1
+ 19000 0 0 3 &mpic 32 1
+ 19000 0 0 4 &mpic 33 1>;
+ interrupt-parent = <&mpic>;
interrupts = <08 2>;
bus-range = <0 0>;
ranges = <02000000 0 80000000 80000000 0 20000000
@@ -200,21 +192,20 @@
compatible = "chrp,iic";
big-endian;
interrupts = <1>;
- interrupt-parent = <8000>;
+ interrupt-parent = <&pci1>;
};
};
pci@9000 {
- linux,phandle = <9000>;
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x15 */
- a800 0 0 1 40000 3b 1
- a800 0 0 2 40000 3b 1
- a800 0 0 3 40000 3b 1
- a800 0 0 4 40000 3b 1>;
- interrupt-parent = <40000>;
+ a800 0 0 1 &mpic 3b 1
+ a800 0 0 2 &mpic 3b 1
+ a800 0 0 3 &mpic 3b 1
+ a800 0 0 4 &mpic 3b 1>;
+ interrupt-parent = <&mpic>;
interrupts = <09 2>;
bus-range = <0 0>;
ranges = <02000000 0 a0000000 a0000000 0 20000000
@@ -228,8 +219,7 @@
device_type = "pci";
};
- pic@40000 {
- linux,phandle = <40000>;
+ mpic: pic@40000 {
clock-frequency = <0>;
interrupt-controller;
#address-cells = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts
index 893d795..7eb5d81 100644
--- a/arch/powerpc/boot/dts/mpc8548cds.dts
+++ b/arch/powerpc/boot/dts/mpc8548cds.dts
@@ -12,16 +12,14 @@
/ {
model = "MPC8548CDS";
- compatible = "MPC85xxCDS";
+ compatible = "MPC8548CDS", "MPC85xxCDS";
#address-cells = <1>;
#size-cells = <1>;
- linux,phandle = <100>;
cpus {
#cpus = <1>;
#address-cells = <1>;
#size-cells = <0>;
- linux,phandle = <200>;
PowerPC,8548@0 {
device_type = "cpu";
@@ -34,13 +32,11 @@
bus-frequency = <0>; // 166 MHz
clock-frequency = <0>; // 825 MHz, from uboot
32-bit;
- linux,phandle = <201>;
};
};
memory {
device_type = "memory";
- linux,phandle = <300>;
reg = <00000000 08000000>; // 128M at 0x0
};
@@ -58,7 +54,7 @@
compatible = "fsl-i2c";
reg = <3000 100>;
interrupts = <1b 2>;
- interrupt-parent = <40000>;
+ interrupt-parent = <&mpic>;
dfsrr;
};
@@ -68,32 +64,26 @@
device_type = "mdio";
compatible = "gianfar";
reg = <24520 20>;
- linux,phandle = <24520>;
- ethernet-phy@0 {
- linux,phandle = <2452000>;
- interrupt-parent = <40000>;
+ phy0: ethernet-phy@0 {
+ interrupt-parent = <&mpic>;
interrupts = <35 0>;
reg = <0>;
device_type = "ethernet-phy";
};
- ethernet-phy@1 {
- linux,phandle = <2452001>;
- interrupt-parent = <40000>;
+ phy1: ethernet-phy@1 {
+ interrupt-parent = <&mpic>;
interrupts = <35 0>;
reg = <1>;
device_type = "ethernet-phy";
};
-
- ethernet-phy@2 {
- linux,phandle = <2452002>;
- interrupt-parent = <40000>;
+ phy2: ethernet-phy@2 {
+ interrupt-parent = <&mpic>;
interrupts = <35 0>;
reg = <2>;
device_type = "ethernet-phy";
};
- ethernet-phy@3 {
- linux,phandle = <2452003>;
- interrupt-parent = <40000>;
+ phy3: ethernet-phy@3 {
+ interrupt-parent = <&mpic>;
interrupts = <35 0>;
reg = <3>;
device_type = "ethernet-phy";
@@ -109,8 +99,8 @@
reg = <24000 1000>;
local-mac-address = [ 00 E0 0C 00 73 00 ];
interrupts = <d 2 e 2 12 2>;
- interrupt-parent = <40000>;
- phy-handle = <2452000>;
+ interrupt-parent = <&mpic>;
+ phy-handle = <&phy0>;
};
ethernet@25000 {
@@ -122,10 +112,11 @@
reg = <25000 1000>;
local-mac-address = [ 00 E0 0C 00 73 01 ];
interrupts = <13 2 14 2 18 2>;
- interrupt-parent = <40000>;
- phy-handle = <2452001>;
+ interrupt-parent = <&mpic>;
+ phy-handle = <&phy1>;
};
+/* eTSEC 3/4 are currently broken
ethernet@26000 {
#address-cells = <1>;
#size-cells = <0>;
@@ -135,11 +126,10 @@
reg = <26000 1000>;
local-mac-address = [ 00 E0 0C 00 73 02 ];
interrupts = <f 2 10 2 11 2>;
- interrupt-parent = <40000>;
- phy-handle = <2452001>;
+ interrupt-parent = <&mpic>;
+ phy-handle = <&phy2>;
};
-/* eTSEC 4 is currently broken
ethernet@27000 {
#address-cells = <1>;
#size-cells = <0>;
@@ -149,8 +139,8 @@
reg = <27000 1000>;
local-mac-address = [ 00 E0 0C 00 73 03 ];
interrupts = <15 2 16 2 17 2>;
- interrupt-parent = <40000>;
- phy-handle = <2452001>;
+ interrupt-parent = <&mpic>;
+ phy-handle = <&phy3>;
};
*/
@@ -160,7 +150,7 @@
reg = <4500 100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
interrupts = <1a 2>;
- interrupt-parent = <40000>;
+ interrupt-parent = <&mpic>;
};
serial@4600 {
@@ -169,57 +159,56 @@
reg = <4600 100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
interrupts = <1a 2>;
- interrupt-parent = <40000>;
+ interrupt-parent = <&mpic>;
};
- pci@8000 {
- linux,phandle = <8000>;
+ pci1: pci@8000 {
interrupt-map-mask = <1f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x10 */
- 08000 0 0 1 40000 30 1
- 08000 0 0 2 40000 31 1
- 08000 0 0 3 40000 32 1
- 08000 0 0 4 40000 33 1
+ 08000 0 0 1 &mpic 30 1
+ 08000 0 0 2 &mpic 31 1
+ 08000 0 0 3 &mpic 32 1
+ 08000 0 0 4 &mpic 33 1
/* IDSEL 0x11 */
- 08800 0 0 1 40000 30 1
- 08800 0 0 2 40000 31 1
- 08800 0 0 3 40000 32 1
- 08800 0 0 4 40000 33 1
+ 08800 0 0 1 &mpic 30 1
+ 08800 0 0 2 &mpic 31 1
+ 08800 0 0 3 &mpic 32 1
+ 08800 0 0 4 &mpic 33 1
/* IDSEL 0x12 (Slot 1) */
- 09000 0 0 1 40000 30 1
- 09000 0 0 2 40000 31 1
- 09000 0 0 3 40000 32 1
- 09000 0 0 4 40000 33 1
+ 09000 0 0 1 &mpic 30 1
+ 09000 0 0 2 &mpic 31 1
+ 09000 0 0 3 &mpic 32 1
+ 09000 0 0 4 &mpic 33 1
/* IDSEL 0x13 (Slot 2) */
- 09800 0 0 1 40000 31 1
- 09800 0 0 2 40000 32 1
- 09800 0 0 3 40000 33 1
- 09800 0 0 4 40000 30 1
+ 09800 0 0 1 &mpic 31 1
+ 09800 0 0 2 &mpic 32 1
+ 09800 0 0 3 &mpic 33 1
+ 09800 0 0 4 &mpic 30 1
/* IDSEL 0x14 (Slot 3) */
- 0a000 0 0 1 40000 32 1
- 0a000 0 0 2 40000 33 1
- 0a000 0 0 3 40000 30 1
- 0a000 0 0 4 40000 31 1
+ 0a000 0 0 1 &mpic 32 1
+ 0a000 0 0 2 &mpic 33 1
+ 0a000 0 0 3 &mpic 30 1
+ 0a000 0 0 4 &mpic 31 1
/* IDSEL 0x15 (Slot 4) */
- 0a800 0 0 1 40000 33 1
- 0a800 0 0 2 40000 30 1
- 0a800 0 0 3 40000 31 1
- 0a800 0 0 4 40000 32 1
+ 0a800 0 0 1 &mpic 33 1
+ 0a800 0 0 2 &mpic 30 1
+ 0a800 0 0 3 &mpic 31 1
+ 0a800 0 0 4 &mpic 32 1
/* Bus 1 (Tundra Bridge) */
/* IDSEL 0x12 (ISA bridge) */
- 19000 0 0 1 40000 30 1
- 19000 0 0 2 40000 31 1
- 19000 0 0 3 40000 32 1
- 19000 0 0 4 40000 33 1>;
- interrupt-parent = <40000>;
+ 19000 0 0 1 &mpic 30 1
+ 19000 0 0 2 &mpic 31 1
+ 19000 0 0 3 &mpic 32 1
+ 19000 0 0 4 &mpic 33 1>;
+ interrupt-parent = <&mpic>;
interrupts = <08 2>;
bus-range = <0 0>;
ranges = <02000000 0 80000000 80000000 0 20000000
@@ -243,21 +232,20 @@
compatible = "chrp,iic";
big-endian;
interrupts = <1>;
- interrupt-parent = <8000>;
+ interrupt-parent = <&pci1>;
};
};
pci@9000 {
- linux,phandle = <9000>;
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x15 */
- a800 0 0 1 40000 3b 1
- a800 0 0 2 40000 3b 1
- a800 0 0 3 40000 3b 1
- a800 0 0 4 40000 3b 1>;
- interrupt-parent = <40000>;
+ a800 0 0 1 &mpic 3b 1
+ a800 0 0 2 &mpic 3b 1
+ a800 0 0 3 &mpic 3b 1
+ a800 0 0 4 &mpic 3b 1>;
+ interrupt-parent = <&mpic>;
interrupts = <09 2>;
bus-range = <0 0>;
ranges = <02000000 0 a0000000 a0000000 0 20000000
@@ -271,8 +259,7 @@
device_type = "pci";
};
- pic@40000 {
- linux,phandle = <40000>;
+ mpic: pic@40000 {
clock-frequency = <0>;
interrupt-controller;
#address-cells = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8555cds.dts b/arch/powerpc/boot/dts/mpc8555cds.dts
index 118f5a8..5f9c102 100644
--- a/arch/powerpc/boot/dts/mpc8555cds.dts
+++ b/arch/powerpc/boot/dts/mpc8555cds.dts
@@ -12,16 +12,14 @@
/ {
model = "MPC8555CDS";
- compatible = "MPC85xxCDS";
+ compatible = "MPC8555CDS", "MPC85xxCDS";
#address-cells = <1>;
#size-cells = <1>;
- linux,phandle = <100>;
cpus {
#cpus = <1>;
#address-cells = <1>;
#size-cells = <0>;
- linux,phandle = <200>;
PowerPC,8555@0 {
device_type = "cpu";
@@ -34,13 +32,11 @@
bus-frequency = <0>; // 166 MHz
clock-frequency = <0>; // 825 MHz, from uboot
32-bit;
- linux,phandle = <201>;
};
};
memory {
device_type = "memory";
- linux,phandle = <300>;
reg = <00000000 08000000>; // 128M at 0x0
};
@@ -58,7 +54,7 @@
compatible = "fsl-i2c";
reg = <3000 100>;
interrupts = <1b 2>;
- interrupt-parent = <40000>;
+ interrupt-parent = <&mpic>;
dfsrr;
};
@@ -68,17 +64,14 @@
device_type = "mdio";
compatible = "gianfar";
reg = <24520 20>;
- linux,phandle = <24520>;
- ethernet-phy@0 {
- linux,phandle = <2452000>;
- interrupt-parent = <40000>;
+ phy0: ethernet-phy@0 {
+ interrupt-parent = <&mpic>;
interrupts = <35 0>;
reg = <0>;
device_type = "ethernet-phy";
};
- ethernet-phy@1 {
- linux,phandle = <2452001>;
- interrupt-parent = <40000>;
+ phy1: ethernet-phy@1 {
+ interrupt-parent = <&mpic>;
interrupts = <35 0>;
reg = <1>;
device_type = "ethernet-phy";
@@ -94,8 +87,8 @@
reg = <24000 1000>;
local-mac-address = [ 00 E0 0C 00 73 00 ];
interrupts = <0d 2 0e 2 12 2>;
- interrupt-parent = <40000>;
- phy-handle = <2452000>;
+ interrupt-parent = <&mpic>;
+ phy-handle = <&phy0>;
};
ethernet@25000 {
@@ -107,8 +100,8 @@
reg = <25000 1000>;
local-mac-address = [ 00 E0 0C 00 73 01 ];
interrupts = <13 2 14 2 18 2>;
- interrupt-parent = <40000>;
- phy-handle = <2452001>;
+ interrupt-parent = <&mpic>;
+ phy-handle = <&phy1>;
};
serial@4500 {
@@ -117,7 +110,7 @@
reg = <4500 100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
interrupts = <1a 2>;
- interrupt-parent = <40000>;
+ interrupt-parent = <&mpic>;
};
serial@4600 {
@@ -126,57 +119,56 @@
reg = <4600 100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
interrupts = <1a 2>;
- interrupt-parent = <40000>;
+ interrupt-parent = <&mpic>;
};
- pci@8000 {
- linux,phandle = <8000>;
+ pci1: pci@8000 {
interrupt-map-mask = <1f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x10 */
- 08000 0 0 1 40000 30 1
- 08000 0 0 2 40000 31 1
- 08000 0 0 3 40000 32 1
- 08000 0 0 4 40000 33 1
+ 08000 0 0 1 &mpic 30 1
+ 08000 0 0 2 &mpic 31 1
+ 08000 0 0 3 &mpic 32 1
+ 08000 0 0 4 &mpic 33 1
/* IDSEL 0x11 */
- 08800 0 0 1 40000 30 1
- 08800 0 0 2 40000 31 1
- 08800 0 0 3 40000 32 1
- 08800 0 0 4 40000 33 1
+ 08800 0 0 1 &mpic 30 1
+ 08800 0 0 2 &mpic 31 1
+ 08800 0 0 3 &mpic 32 1
+ 08800 0 0 4 &mpic 33 1
/* IDSEL 0x12 (Slot 1) */
- 09000 0 0 1 40000 30 1
- 09000 0 0 2 40000 31 1
- 09000 0 0 3 40000 32 1
- 09000 0 0 4 40000 33 1
+ 09000 0 0 1 &mpic 30 1
+ 09000 0 0 2 &mpic 31 1
+ 09000 0 0 3 &mpic 32 1
+ 09000 0 0 4 &mpic 33 1
/* IDSEL 0x13 (Slot 2) */
- 09800 0 0 1 40000 31 1
- 09800 0 0 2 40000 32 1
- 09800 0 0 3 40000 33 1
- 09800 0 0 4 40000 30 1
+ 09800 0 0 1 &mpic 31 1
+ 09800 0 0 2 &mpic 32 1
+ 09800 0 0 3 &mpic 33 1
+ 09800 0 0 4 &mpic 30 1
/* IDSEL 0x14 (Slot 3) */
- 0a000 0 0 1 40000 32 1
- 0a000 0 0 2 40000 33 1
- 0a000 0 0 3 40000 30 1
- 0a000 0 0 4 40000 31 1
+ 0a000 0 0 1 &mpic 32 1
+ 0a000 0 0 2 &mpic 33 1
+ 0a000 0 0 3 &mpic 30 1
+ 0a000 0 0 4 &mpic 31 1
/* IDSEL 0x15 (Slot 4) */
- 0a800 0 0 1 40000 33 1
- 0a800 0 0 2 40000 30 1
- 0a800 0 0 3 40000 31 1
- 0a800 0 0 4 40000 32 1
+ 0a800 0 0 1 &mpic 33 1
+ 0a800 0 0 2 &mpic 30 1
+ 0a800 0 0 3 &mpic 31 1
+ 0a800 0 0 4 &mpic 32 1
/* Bus 1 (Tundra Bridge) */
/* IDSEL 0x12 (ISA bridge) */
- 19000 0 0 1 40000 30 1
- 19000 0 0 2 40000 31 1
- 19000 0 0 3 40000 32 1
- 19000 0 0 4 40000 33 1>;
- interrupt-parent = <40000>;
+ 19000 0 0 1 &mpic 30 1
+ 19000 0 0 2 &mpic 31 1
+ 19000 0 0 3 &mpic 32 1
+ 19000 0 0 4 &mpic 33 1>;
+ interrupt-parent = <&mpic>;
interrupts = <08 2>;
bus-range = <0 0>;
ranges = <02000000 0 80000000 80000000 0 20000000
@@ -200,21 +192,20 @@
compatible = "chrp,iic";
big-endian;
interrupts = <1>;
- interrupt-parent = <8000>;
+ interrupt-parent = <&pci1>;
};
};
pci@9000 {
- linux,phandle = <9000>;
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x15 */
- a800 0 0 1 40000 3b 1
- a800 0 0 2 40000 3b 1
- a800 0 0 3 40000 3b 1
- a800 0 0 4 40000 3b 1>;
- interrupt-parent = <40000>;
+ a800 0 0 1 &mpic 3b 1
+ a800 0 0 2 &mpic 3b 1
+ a800 0 0 3 &mpic 3b 1
+ a800 0 0 4 &mpic 3b 1>;
+ interrupt-parent = <&mpic>;
interrupts = <09 2>;
bus-range = <0 0>;
ranges = <02000000 0 a0000000 a0000000 0 20000000
@@ -228,8 +219,7 @@
device_type = "pci";
};
- pic@40000 {
- linux,phandle = <40000>;
+ mpic: pic@40000 {
clock-frequency = <0>;
interrupt-controller;
#address-cells = <0>;
diff --git a/arch/powerpc/boot/dts/mpc8560ads.dts b/arch/powerpc/boot/dts/mpc8560ads.dts
index 119bd5d..1050263 100644
--- a/arch/powerpc/boot/dts/mpc8560ads.dts
+++ b/arch/powerpc/boot/dts/mpc8560ads.dts
@@ -12,16 +12,14 @@
/ {
model = "MPC8560ADS";
- compatible = "MPC85xxADS";
+ compatible = "MPC8560ADS", "MPC85xxADS";
#address-cells = <1>;
#size-cells = <1>;
- linux,phandle = <100>;
cpus {
#cpus = <1>;
#address-cells = <1>;
#size-cells = <0>;
- linux,phandle = <200>;
PowerPC,8560@0 {
device_type = "cpu";
@@ -34,14 +32,11 @@
bus-frequency = <13ab6680>;
clock-frequency = <312c8040>;
32-bit;
- linux,phandle = <201>;
- linux,boot-cpu;
};
};
memory {
device_type = "memory";
- linux,phandle = <300>;
reg = <00000000 10000000>;
};
@@ -58,33 +53,28 @@
device_type = "mdio";
compatible = "gianfar";
reg = <24520 20>;
- linux,phandle = <24520>;
#address-cells = <1>;
#size-cells = <0>;
- ethernet-phy@0 {
- linux,phandle = <2452000>;
- interrupt-parent = <40000>;
+ phy0: ethernet-phy@0 {
+ interrupt-parent = <&mpic>;
interrupts = <35 1>;
reg = <0>;
device_type = "ethernet-phy";
};
- ethernet-phy@1 {
- linux,phandle = <2452001>;
- interrupt-parent = <40000>;
+ phy1: ethernet-phy@1 {
+ interrupt-parent = <&mpic>;
interrupts = <35 1>;
reg = <1>;
device_type = "ethernet-phy";
};
- ethernet-phy@2 {
- linux,phandle = <2452002>;
- interrupt-parent = <40000>;
+ phy2: ethernet-phy@2 {
+ interrupt-parent = <&mpic>;
interrupts = <37 1>;
reg = <2>;
device_type = "ethernet-phy";
};
- ethernet-phy@3 {
- linux,phandle = <2452003>;
- interrupt-parent = <40000>;
+ phy3: ethernet-phy@3 {
+ interrupt-parent = <&mpic>;
interrupts = <37 1>;
reg = <3>;
device_type = "ethernet-phy";
@@ -98,8 +88,8 @@
reg = <24000 1000>;
address = [ 00 00 0C 00 00 FD ];
interrupts = <d 2 e 2 12 2>;
- interrupt-parent = <40000>;
- phy-handle = <2452000>;
+ interrupt-parent = <&mpic>;
+ phy-handle = <&phy0>;
};
ethernet@25000 {
@@ -111,12 +101,11 @@
reg = <25000 1000>;
address = [ 00 00 0C 00 01 FD ];
interrupts = <13 2 14 2 18 2>;
- interrupt-parent = <40000>;
- phy-handle = <2452001>;
+ interrupt-parent = <&mpic>;
+ phy-handle = <&phy1>;
};
pci@8000 {
- linux,phandle = <8000>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
@@ -128,96 +117,94 @@
interrupt-map = <
/* IDSEL 0x2 */
- 1000 0 0 1 40000 31 1
- 1000 0 0 2 40000 32 1
- 1000 0 0 3 40000 33 1
- 1000 0 0 4 40000 34 1
+ 1000 0 0 1 &mpic 31 1
+ 1000 0 0 2 &mpic 32 1
+ 1000 0 0 3 &mpic 33 1
+ 1000 0 0 4 &mpic 34 1
/* IDSEL 0x3 */
- 1800 0 0 1 40000 34 1
- 1800 0 0 2 40000 31 1
- 1800 0 0 3 40000 32 1
- 1800 0 0 4 40000 33 1
+ 1800 0 0 1 &mpic 34 1
+ 1800 0 0 2 &mpic 31 1
+ 1800 0 0 3 &mpic 32 1
+ 1800 0 0 4 &mpic 33 1
/* IDSEL 0x4 */
- 2000 0 0 1 40000 33 1
- 2000 0 0 2 40000 34 1
- 2000 0 0 3 40000 31 1
- 2000 0 0 4 40000 32 1
+ 2000 0 0 1 &mpic 33 1
+ 2000 0 0 2 &mpic 34 1
+ 2000 0 0 3 &mpic 31 1
+ 2000 0 0 4 &mpic 32 1
/* IDSEL 0x5 */
- 2800 0 0 1 40000 32 1
- 2800 0 0 2 40000 33 1
- 2800 0 0 3 40000 34 1
- 2800 0 0 4 40000 31 1
+ 2800 0 0 1 &mpic 32 1
+ 2800 0 0 2 &mpic 33 1
+ 2800 0 0 3 &mpic 34 1
+ 2800 0 0 4 &mpic 31 1
/* IDSEL 12 */
- 6000 0 0 1 40000 31 1
- 6000 0 0 2 40000 32 1
- 6000 0 0 3 40000 33 1
- 6000 0 0 4 40000 34 1
+ 6000 0 0 1 &mpic 31 1
+ 6000 0 0 2 &mpic 32 1
+ 6000 0 0 3 &mpic 33 1
+ 6000 0 0 4 &mpic 34 1
/* IDSEL 13 */
- 6800 0 0 1 40000 34 1
- 6800 0 0 2 40000 31 1
- 6800 0 0 3 40000 32 1
- 6800 0 0 4 40000 33 1
+ 6800 0 0 1 &mpic 34 1
+ 6800 0 0 2 &mpic 31 1
+ 6800 0 0 3 &mpic 32 1
+ 6800 0 0 4 &mpic 33 1
/* IDSEL 14*/
- 7000 0 0 1 40000 33 1
- 7000 0 0 2 40000 34 1
- 7000 0 0 3 40000 31 1
- 7000 0 0 4 40000 32 1
+ 7000 0 0 1 &mpic 33 1
+ 7000 0 0 2 &mpic 34 1
+ 7000 0 0 3 &mpic 31 1
+ 7000 0 0 4 &mpic 32 1
/* IDSEL 15 */
- 7800 0 0 1 40000 32 1
- 7800 0 0 2 40000 33 1
- 7800 0 0 3 40000 34 1
- 7800 0 0 4 40000 31 1
+ 7800 0 0 1 &mpic 32 1
+ 7800 0 0 2 &mpic 33 1
+ 7800 0 0 3 &mpic 34 1
+ 7800 0 0 4 &mpic 31 1
/* IDSEL 18 */
- 9000 0 0 1 40000 31 1
- 9000 0 0 2 40000 32 1
- 9000 0 0 3 40000 33 1
- 9000 0 0 4 40000 34 1
+ 9000 0 0 1 &mpic 31 1
+ 9000 0 0 2 &mpic 32 1
+ 9000 0 0 3 &mpic 33 1
+ 9000 0 0 4 &mpic 34 1
/* IDSEL 19 */
- 9800 0 0 1 40000 34 1
- 9800 0 0 2 40000 31 1
- 9800 0 0 3 40000 32 1
- 9800 0 0 4 40000 33 1
+ 9800 0 0 1 &mpic 34 1
+ 9800 0 0 2 &mpic 31 1
+ 9800 0 0 3 &mpic 32 1
+ 9800 0 0 4 &mpic 33 1
/* IDSEL 20 */
- a000 0 0 1 40000 33 1
- a000 0 0 2 40000 34 1
- a000 0 0 3 40000 31 1
- a000 0 0 4 40000 32 1
+ a000 0 0 1 &mpic 33 1
+ a000 0 0 2 &mpic 34 1
+ a000 0 0 3 &mpic 31 1
+ a000 0 0 4 &mpic 32 1
/* IDSEL 21 */
- a800 0 0 1 40000 32 1
- a800 0 0 2 40000 33 1
- a800 0 0 3 40000 34 1
- a800 0 0 4 40000 31 1>;
+ a800 0 0 1 &mpic 32 1
+ a800 0 0 2 &mpic 33 1
+ a800 0 0 3 &mpic 34 1
+ a800 0 0 4 &mpic 31 1>;
- interrupt-parent = <40000>;
+ interrupt-parent = <&mpic>;
interrupts = <8 0>;
bus-range = <0 0>;
ranges = <02000000 0 80000000 80000000 0 20000000
01000000 0 00000000 e2000000 0 01000000>;
};
- pic@40000 {
- linux,phandle = <40000>;
+ mpic: pic@40000 {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
- reg = <40000 20100>;
+ reg = <40000 40000>;
built-in;
device_type = "open-pic";
};
cpm@e0000000 {
- linux,phandle = <e0000000>;
#address-cells = <1>;
#size-cells = <1>;
#interrupt-cells = <2>;
@@ -228,13 +215,12 @@
command-proc = <919c0>;
brg-frequency = <9d5b340>;
- pic@90c00 {
- linux,phandle = <90c00>;
+ cpmpic: pic@90c00 {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
interrupts = <1e 0>;
- interrupt-parent = <40000>;
+ interrupt-parent = <&mpic>;
reg = <90c00 80>;
built-in;
device_type = "cpm-pic";
@@ -251,7 +237,7 @@
tx-clock = <1>;
current-speed = <1c200>;
interrupts = <28 8>;
- interrupt-parent = <90c00>;
+ interrupt-parent = <&cpmpic>;
};
scc@91a20 {
@@ -265,7 +251,7 @@
tx-clock = <2>;
current-speed = <1c200>;
interrupts = <29 8>;
- interrupt-parent = <90c00>;
+ interrupt-parent = <&cpmpic>;
};
fcc@91320 {
@@ -279,8 +265,8 @@
rx-clock = <15>;
tx-clock = <16>;
interrupts = <21 8>;
- interrupt-parent = <90c00>;
- phy-handle = <2452002>;
+ interrupt-parent = <&cpmpic>;
+ phy-handle = <&phy2>;
};
fcc@91340 {
@@ -294,8 +280,8 @@
rx-clock = <17>;
tx-clock = <18>;
interrupts = <22 8>;
- interrupt-parent = <90c00>;
- phy-handle = <2452003>;
+ interrupt-parent = <&cpmpic>;
+ phy-handle = <&phy3>;
};
};
};
diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts
index 06d2465..bf49d8c 100644
--- a/arch/powerpc/boot/dts/mpc8568mds.dts
+++ b/arch/powerpc/boot/dts/mpc8568mds.dts
@@ -16,16 +16,14 @@
/ {
model = "MPC8568EMDS";
- compatible = "MPC85xxMDS";
+ compatible = "MPC8568EMDS", "MPC85xxMDS";
#address-cells = <1>;
#size-cells = <1>;
- linux,phandle = <100>;
cpus {
#cpus = <1>;
#address-cells = <1>;
#size-cells = <0>;
- linux,phandle = <200>;
PowerPC,8568@0 {
device_type = "cpu";
@@ -38,13 +36,11 @@
bus-frequency = <0>;
clock-frequency = <0>;
32-bit;
- linux,phandle = <201>;
};
};
memory {
device_type = "memory";
- linux,phandle = <300>;
reg = <00000000 10000000>;
};
@@ -67,7 +63,7 @@
compatible = "fsl-i2c";
reg = <3000 100>;
interrupts = <1b 2>;
- interrupt-parent = <40000>;
+ interrupt-parent = <&mpic>;
dfsrr;
};
@@ -76,7 +72,7 @@
compatible = "fsl-i2c";
reg = <3100 100>;
interrupts = <1b 2>;
- interrupt-parent = <40000>;
+ interrupt-parent = <&mpic>;
dfsrr;
};
@@ -86,32 +82,26 @@
device_type = "mdio";
compatible = "gianfar";
reg = <24520 20>;
- linux,phandle = <24520>;
- ethernet-phy@0 {
- linux,phandle = <2452000>;
- interrupt-parent = <40000>;
+ phy0: ethernet-phy@0 {
+ interrupt-parent = <&mpic>;
interrupts = <31 1>;
reg = <0>;
device_type = "ethernet-phy";
};
- ethernet-phy@1 {
- linux,phandle = <2452001>;
- interrupt-parent = <40000>;
+ phy1: ethernet-phy@1 {
+ interrupt-parent = <&mpic>;
interrupts = <32 1>;
reg = <1>;
device_type = "ethernet-phy";
};
-
- ethernet-phy@2 {
- linux,phandle = <2452002>;
- interrupt-parent = <40000>;
+ phy2: ethernet-phy@2 {
+ interrupt-parent = <&mpic>;
interrupts = <31 1>;
reg = <2>;
device_type = "ethernet-phy";
};
- ethernet-phy@3 {
- linux,phandle = <2452003>;
- interrupt-parent = <40000>;
+ phy3: ethernet-phy@3 {
+ interrupt-parent = <&mpic>;
interrupts = <32 1>;
reg = <3>;
device_type = "ethernet-phy";
@@ -127,8 +117,8 @@
reg = <24000 1000>;
mac-address = [ 00 00 00 00 00 00 ];
interrupts = <d 2 e 2 12 2>;
- interrupt-parent = <40000>;
- phy-handle = <2452002>;
+ interrupt-parent = <&mpic>;
+ phy-handle = <&phy2>;
};
ethernet@25000 {
@@ -140,8 +130,8 @@
reg = <25000 1000>;
mac-address = [ 00 00 00 00 00 00];
interrupts = <13 2 14 2 18 2>;
- interrupt-parent = <40000>;
- phy-handle = <2452003>;
+ interrupt-parent = <&mpic>;
+ phy-handle = <&phy3>;
};
serial@4500 {
@@ -150,7 +140,7 @@
reg = <4500 100>;
clock-frequency = <0>;
interrupts = <1a 2>;
- interrupt-parent = <40000>;
+ interrupt-parent = <&mpic>;
};
serial@4600 {
@@ -159,7 +149,7 @@
reg = <4600 100>;
clock-frequency = <0>;
interrupts = <1a 2>;
- interrupt-parent = <40000>;
+ interrupt-parent = <&mpic>;
};
crypto@30000 {
@@ -168,15 +158,14 @@
compatible = "talitos";
reg = <30000 f000>;
interrupts = <1d 2>;
- interrupt-parent = <40000>;
+ interrupt-parent = <&mpic>;
num-channels = <4>;
channel-fifo-len = <18>;
exec-units-mask = <000000fe>;
descriptor-types-mask = <012b0ebf>;
};
- pic@40000 {
- linux,phandle = <40000>;
+ mpic: pic@40000 {
clock-frequency = <0>;
interrupt-controller;
#address-cells = <0>;
@@ -192,8 +181,7 @@
device_type = "par_io";
num-ports = <7>;
- ucc_pin@01 {
- linux,phandle = <e010001>;
+ pio1: ucc_pin@01 {
pio-map = <
/* port pin dir open_drain assignment has_irq */
4 0a 1 0 2 0 /* TxD0 */
@@ -220,8 +208,7 @@
4 13 1 0 2 0 /* GTX_CLK */
1 1f 2 0 3 0>; /* GTX125 */
};
- ucc_pin@02 {
- linux,phandle = <e010002>;
+ pio2: ucc_pin@02 {
pio-map = <
/* port pin dir open_drain assignment has_irq */
5 0a 1 0 2 0 /* TxD0 */
@@ -277,7 +264,7 @@
compatible = "fsl_spi";
reg = <4c0 40>;
interrupts = <2>;
- interrupt-parent = <80>;
+ interrupt-parent = <&qeic>;
mode = "cpu";
};
@@ -286,7 +273,7 @@
compatible = "fsl_spi";
reg = <500 40>;
interrupts = <1>;
- interrupt-parent = <80>;
+ interrupt-parent = <&qeic>;
mode = "cpu";
};
@@ -297,12 +284,12 @@
device-id = <1>;
reg = <2000 200>;
interrupts = <20>;
- interrupt-parent = <80>;
+ interrupt-parent = <&qeic>;
mac-address = [ 00 04 9f 00 23 23 ];
rx-clock = <0>;
tx-clock = <19>;
- phy-handle = <212000>;
- pio-handle = <e010001>;
+ phy-handle = <&qe_phy0>;
+ pio-handle = <&pio1>;
};
ucc@3000 {
@@ -312,12 +299,12 @@
device-id = <2>;
reg = <3000 200>;
interrupts = <21>;
- interrupt-parent = <80>;
+ interrupt-parent = <&qeic>;
mac-address = [ 00 11 22 33 44 55 ];
rx-clock = <0>;
tx-clock = <14>;
- phy-handle = <212001>;
- pio-handle = <e010002>;
+ phy-handle = <&qe_phy1>;
+ pio-handle = <&pio2>;
};
mdio@2120 {
@@ -329,33 +316,29 @@
/* These are the same PHYs as on
* gianfar's MDIO bus */
- ethernet-phy@00 {
- linux,phandle = <212000>;
- interrupt-parent = <40000>;
+ qe_phy0: ethernet-phy@00 {
+ interrupt-parent = <&mpic>;
interrupts = <31 1>;
reg = <0>;
device_type = "ethernet-phy";
interface = <6>; //ENET_1000_GMII
};
- ethernet-phy@01 {
- linux,phandle = <212001>;
- interrupt-parent = <40000>;
+ qe_phy1: ethernet-phy@01 {
+ interrupt-parent = <&mpic>;
interrupts = <32 1>;
reg = <1>;
device_type = "ethernet-phy";
interface = <6>;
};
- ethernet-phy@02 {
- linux,phandle = <212002>;
- interrupt-parent = <40000>;
+ qe_phy2: ethernet-phy@02 {
+ interrupt-parent = <&mpic>;
interrupts = <31 1>;
reg = <2>;
device_type = "ethernet-phy";
interface = <6>; //ENET_1000_GMII
};
- ethernet-phy@03 {
- linux,phandle = <212003>;
- interrupt-parent = <40000>;
+ qe_phy3: ethernet-phy@03 {
+ interrupt-parent = <&mpic>;
interrupts = <32 1>;
reg = <3>;
device_type = "ethernet-phy";
@@ -363,8 +346,7 @@
};
};
- qeic@80 {
- linux,phandle = <80>;
+ qeic: qeic@80 {
interrupt-controller;
device_type = "qeic";
#address-cells = <0>;
@@ -373,7 +355,7 @@
built-in;
big-endian;
interrupts = <1e 2 1e 2>; //high:30 low:30
- interrupt-parent = <40000>;
+ interrupt-parent = <&mpic>;
};
};
diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
index f0c7731..8a4995a 100644
--- a/arch/powerpc/boot/dts/mpc8641_hpcn.dts
+++ b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
@@ -32,7 +32,6 @@
bus-frequency = <0>; // From uboot
clock-frequency = <0>; // From uboot
32-bit;
- linux,boot-cpu;
};
PowerPC,8641@1 {
device_type = "cpu";
@@ -67,7 +66,7 @@
compatible = "fsl-i2c";
reg = <3000 100>;
interrupts = <2b 2>;
- interrupt-parent = <40000>;
+ interrupt-parent = <&mpic>;
dfsrr;
};
@@ -76,7 +75,7 @@
compatible = "fsl-i2c";
reg = <3100 100>;
interrupts = <2b 2>;
- interrupt-parent = <40000>;
+ interrupt-parent = <&mpic>;
dfsrr;
};
@@ -86,31 +85,26 @@
device_type = "mdio";
compatible = "gianfar";
reg = <24520 20>;
- linux,phandle = <24520>;
- ethernet-phy@0 {
- linux,phandle = <2452000>;
- interrupt-parent = <40000>;
+ phy0: ethernet-phy@0 {
+ interrupt-parent = <&mpic>;
interrupts = <4a 1>;
reg = <0>;
device_type = "ethernet-phy";
};
- ethernet-phy@1 {
- linux,phandle = <2452001>;
- interrupt-parent = <40000>;
+ phy1: ethernet-phy@1 {
+ interrupt-parent = <&mpic>;
interrupts = <4a 1>;
reg = <1>;
device_type = "ethernet-phy";
};
- ethernet-phy@2 {
- linux,phandle = <2452002>;
- interrupt-parent = <40000>;
+ phy2: ethernet-phy@2 {
+ interrupt-parent = <&mpic>;
interrupts = <4a 1>;
reg = <2>;
device_type = "ethernet-phy";
};
- ethernet-phy@3 {
- linux,phandle = <2452003>;
- interrupt-parent = <40000>;
+ phy3: ethernet-phy@3 {
+ interrupt-parent = <&mpic>;
interrupts = <4a 1>;
reg = <3>;
device_type = "ethernet-phy";
@@ -126,8 +120,8 @@
reg = <24000 1000>;
mac-address = [ 00 E0 0C 00 73 00 ];
interrupts = <1d 2 1e 2 22 2>;
- interrupt-parent = <40000>;
- phy-handle = <2452000>;
+ interrupt-parent = <&mpic>;
+ phy-handle = <&phy0>;
};
ethernet@25000 {
@@ -139,8 +133,8 @@
reg = <25000 1000>;
mac-address = [ 00 E0 0C 00 73 01 ];
interrupts = <23 2 24 2 28 2>;
- interrupt-parent = <40000>;
- phy-handle = <2452001>;
+ interrupt-parent = <&mpic>;
+ phy-handle = <&phy1>;
};
ethernet@26000 {
@@ -152,8 +146,8 @@
reg = <26000 1000>;
mac-address = [ 00 E0 0C 00 02 FD ];
interrupts = <1F 2 20 2 21 2>;
- interrupt-parent = <40000>;
- phy-handle = <2452002>;
+ interrupt-parent = <&mpic>;
+ phy-handle = <&phy2>;
};
ethernet@27000 {
@@ -165,8 +159,8 @@
reg = <27000 1000>;
mac-address = [ 00 E0 0C 00 03 FD ];
interrupts = <25 2 26 2 27 2>;
- interrupt-parent = <40000>;
- phy-handle = <2452003>;
+ interrupt-parent = <&mpic>;
+ phy-handle = <&phy3>;
};
serial@4500 {
device_type = "serial";
@@ -174,7 +168,7 @@
reg = <4500 100>;
clock-frequency = <0>;
interrupts = <2a 2>;
- interrupt-parent = <40000>;
+ interrupt-parent = <&mpic>;
};
serial@4600 {
@@ -183,7 +177,7 @@
reg = <4600 100>;
clock-frequency = <0>;
interrupts = <1c 2>;
- interrupt-parent = <40000>;
+ interrupt-parent = <&mpic>;
};
pci@8000 {
@@ -197,103 +191,102 @@
ranges = <02000000 0 80000000 80000000 0 20000000
01000000 0 00000000 e2000000 0 00100000>;
clock-frequency = <1fca055>;
- interrupt-parent = <40000>;
+ interrupt-parent = <&mpic>;
interrupts = <18 2>;
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x11 */
- 8800 0 0 1 4d0 3 2
- 8800 0 0 2 4d0 4 2
- 8800 0 0 3 4d0 5 2
- 8800 0 0 4 4d0 6 2
+ 8800 0 0 1 &i8259 3 2
+ 8800 0 0 2 &i8259 4 2
+ 8800 0 0 3 &i8259 5 2
+ 8800 0 0 4 &i8259 6 2
/* IDSEL 0x12 */
- 9000 0 0 1 4d0 4 2
- 9000 0 0 2 4d0 5 2
- 9000 0 0 3 4d0 6 2
- 9000 0 0 4 4d0 3 2
+ 9000 0 0 1 &i8259 4 2
+ 9000 0 0 2 &i8259 5 2
+ 9000 0 0 3 &i8259 6 2
+ 9000 0 0 4 &i8259 3 2
/* IDSEL 0x13 */
- 9800 0 0 1 4d0 0 0
- 9800 0 0 2 4d0 0 0
- 9800 0 0 3 4d0 0 0
- 9800 0 0 4 4d0 0 0
+ 9800 0 0 1 &i8259 0 0
+ 9800 0 0 2 &i8259 0 0
+ 9800 0 0 3 &i8259 0 0
+ 9800 0 0 4 &i8259 0 0
/* IDSEL 0x14 */
- a000 0 0 1 4d0 0 0
- a000 0 0 2 4d0 0 0
- a000 0 0 3 4d0 0 0
- a000 0 0 4 4d0 0 0
+ a000 0 0 1 &i8259 0 0
+ a000 0 0 2 &i8259 0 0
+ a000 0 0 3 &i8259 0 0
+ a000 0 0 4 &i8259 0 0
/* IDSEL 0x15 */
- a800 0 0 1 4d0 0 0
- a800 0 0 2 4d0 0 0
- a800 0 0 3 4d0 0 0
- a800 0 0 4 4d0 0 0
+ a800 0 0 1 &i8259 0 0
+ a800 0 0 2 &i8259 0 0
+ a800 0 0 3 &i8259 0 0
+ a800 0 0 4 &i8259 0 0
/* IDSEL 0x16 */
- b000 0 0 1 4d0 0 0
- b000 0 0 2 4d0 0 0
- b000 0 0 3 4d0 0 0
- b000 0 0 4 4d0 0 0
+ b000 0 0 1 &i8259 0 0
+ b000 0 0 2 &i8259 0 0
+ b000 0 0 3 &i8259 0 0
+ b000 0 0 4 &i8259 0 0
/* IDSEL 0x17 */
- b800 0 0 1 4d0 0 0
- b800 0 0 2 4d0 0 0
- b800 0 0 3 4d0 0 0
- b800 0 0 4 4d0 0 0
+ b800 0 0 1 &i8259 0 0
+ b800 0 0 2 &i8259 0 0
+ b800 0 0 3 &i8259 0 0
+ b800 0 0 4 &i8259 0 0
/* IDSEL 0x18 */
- c000 0 0 1 4d0 0 0
- c000 0 0 2 4d0 0 0
- c000 0 0 3 4d0 0 0
- c000 0 0 4 4d0 0 0
+ c000 0 0 1 &i8259 0 0
+ c000 0 0 2 &i8259 0 0
+ c000 0 0 3 &i8259 0 0
+ c000 0 0 4 &i8259 0 0
/* IDSEL 0x19 */
- c800 0 0 1 4d0 0 0
- c800 0 0 2 4d0 0 0
- c800 0 0 3 4d0 0 0
- c800 0 0 4 4d0 0 0
+ c800 0 0 1 &i8259 0 0
+ c800 0 0 2 &i8259 0 0
+ c800 0 0 3 &i8259 0 0
+ c800 0 0 4 &i8259 0 0
/* IDSEL 0x1a */
- d000 0 0 1 4d0 6 2
- d000 0 0 2 4d0 3 2
- d000 0 0 3 4d0 4 2
- d000 0 0 4 4d0 5 2
+ d000 0 0 1 &i8259 6 2
+ d000 0 0 2 &i8259 3 2
+ d000 0 0 3 &i8259 4 2
+ d000 0 0 4 &i8259 5 2
/* IDSEL 0x1b */
- d800 0 0 1 4d0 5 2
- d800 0 0 2 4d0 0 0
- d800 0 0 3 4d0 0 0
- d800 0 0 4 4d0 0 0
+ d800 0 0 1 &i8259 5 2
+ d800 0 0 2 &i8259 0 0
+ d800 0 0 3 &i8259 0 0
+ d800 0 0 4 &i8259 0 0
/* IDSEL 0x1c */
- e000 0 0 1 4d0 9 2
- e000 0 0 2 4d0 a 2
- e000 0 0 3 4d0 c 2
- e000 0 0 4 4d0 7 2
+ e000 0 0 1 &i8259 9 2
+ e000 0 0 2 &i8259 a 2
+ e000 0 0 3 &i8259 c 2
+ e000 0 0 4 &i8259 7 2
/* IDSEL 0x1d */
- e800 0 0 1 4d0 9 2
- e800 0 0 2 4d0 a 2
- e800 0 0 3 4d0 b 2
- e800 0 0 4 4d0 0 0
+ e800 0 0 1 &i8259 9 2
+ e800 0 0 2 &i8259 a 2
+ e800 0 0 3 &i8259 b 2
+ e800 0 0 4 &i8259 0 0
/* IDSEL 0x1e */
- f000 0 0 1 4d0 c 2
- f000 0 0 2 4d0 0 0
- f000 0 0 3 4d0 0 0
- f000 0 0 4 4d0 0 0
+ f000 0 0 1 &i8259 c 2
+ f000 0 0 2 &i8259 0 0
+ f000 0 0 3 &i8259 0 0
+ f000 0 0 4 &i8259 0 0
/* IDSEL 0x1f */
- f800 0 0 1 4d0 6 2
- f800 0 0 2 4d0 0 0
- f800 0 0 3 4d0 0 0
- f800 0 0 4 4d0 0 0
+ f800 0 0 1 &i8259 6 2
+ f800 0 0 2 &i8259 0 0
+ f800 0 0 3 &i8259 0 0
+ f800 0 0 4 &i8259 0 0
>;
- i8259@4d0 {
- linux,phandle = <4d0>;
+ i8259: i8259@4d0 {
clock-frequency = <0>;
interrupt-controller;
device_type = "interrupt-controller";
@@ -303,12 +296,11 @@
compatible = "chrp,iic";
big-endian;
interrupts = <49 2>;
- interrupt-parent = <40000>;
+ interrupt-parent = <&mpic>;
};
};
- pic@40000 {
- linux,phandle = <40000>;
+ mpic: pic@40000 {
clock-frequency = <0>;
interrupt-controller;
#address-cells = <0>;
@@ -317,23 +309,7 @@
built-in;
compatible = "chrp,open-pic";
device_type = "open-pic";
- big-endian;
- interrupts = <
- 10 2 11 2 12 2 13 2
- 14 2 15 2 16 2 17 2
- 18 2 19 2 1a 2 1b 2
- 1c 2 1d 2 1e 2 1f 2
- 20 2 21 2 22 2 23 2
- 24 2 25 2 26 2 27 2
- 28 2 29 2 2a 2 2b 2
- 2c 2 2d 2 2e 2 2f 2
- 30 2 31 2 32 2 33 2
- 34 2 35 2 36 2 37 2
- 38 2 39 2 2a 2 3b 2
- 3c 2 3d 2 3e 2 3f 2
- 48 1 49 2 4a 1
- >;
- interrupt-parent = <40000>;
+ big-endian;
};
};
};
diff --git a/arch/powerpc/boot/dts/mpc866ads.dts b/arch/powerpc/boot/dts/mpc866ads.dts
index 5d40052..2b56b5d 100644
--- a/arch/powerpc/boot/dts/mpc866ads.dts
+++ b/arch/powerpc/boot/dts/mpc866ads.dts
@@ -37,7 +37,6 @@
interrupts = <f 2>; // decrementer interrupt
interrupt-parent = <ff000000>;
linux,phandle = <201>;
- linux,boot-cpu;
};
};
diff --git a/arch/powerpc/boot/dts/mpc885ads.dts b/arch/powerpc/boot/dts/mpc885ads.dts
index cf1a19f..faecd08 100644
--- a/arch/powerpc/boot/dts/mpc885ads.dts
+++ b/arch/powerpc/boot/dts/mpc885ads.dts
@@ -37,7 +37,6 @@
interrupts = <f 2>; // decrementer interrupt
interrupt-parent = <ff000000>;
linux,phandle = <201>;
- linux,boot-cpu;
};
};
diff --git a/arch/powerpc/configs/cell_defconfig b/arch/powerpc/configs/cell_defconfig
index e956548..2436731 100644
--- a/arch/powerpc/configs/cell_defconfig
+++ b/arch/powerpc/configs/cell_defconfig
@@ -147,6 +147,7 @@
# CONFIG_RTAS_ERROR_LOGGING is not set
CONFIG_RTAS_PROC=y
CONFIG_RTAS_FLASH=y
+CONFIG_PPC_PMI=m
CONFIG_MMIO_NVRAM=y
# CONFIG_PPC_MPC106 is not set
# CONFIG_PPC_970_NAP is not set
diff --git a/arch/powerpc/configs/mpc832xemds_defconfig b/arch/powerpc/configs/mpc832x_mds_defconfig
similarity index 100%
rename from arch/powerpc/configs/mpc832xemds_defconfig
rename to arch/powerpc/configs/mpc832x_mds_defconfig
diff --git a/arch/powerpc/configs/mpc8360emds_defconfig b/arch/powerpc/configs/mpc836x_mds_defconfig
similarity index 97%
rename from arch/powerpc/configs/mpc8360emds_defconfig
rename to arch/powerpc/configs/mpc836x_mds_defconfig
index bbe38cc..8eb475c 100644
--- a/arch/powerpc/configs/mpc8360emds_defconfig
+++ b/arch/powerpc/configs/mpc836x_mds_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20-rc5
-# Fri Jan 26 00:19:45 2007
+# Linux kernel version: 2.6.20
+# Sat Feb 17 10:09:26 2007
#
# CONFIG_PPC64 is not set
CONFIG_PPC32=y
@@ -34,9 +34,9 @@
CONFIG_PPC_83xx=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_86xx is not set
+# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
-# CONFIG_8xx is not set
# CONFIG_E200 is not set
CONFIG_6xx=y
CONFIG_83xx=y
@@ -63,6 +63,7 @@
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
@@ -129,10 +130,11 @@
#
# Platform support
#
+# CONFIG_MPC8313_RDB is not set
# CONFIG_MPC832x_MDS is not set
-# CONFIG_MPC834x_SYS is not set
+# CONFIG_MPC834x_MDS is not set
# CONFIG_MPC834x_ITX is not set
-CONFIG_MPC8360E_PB=y
+CONFIG_MPC836x_MDS=y
CONFIG_PPC_MPC836x=y
# CONFIG_MPIC is not set
@@ -162,6 +164,7 @@
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
@@ -171,6 +174,7 @@
#
# Bus options
#
+CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
@@ -219,6 +223,7 @@
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
@@ -528,6 +533,7 @@
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
@@ -620,6 +626,7 @@
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_OF_PLATFORM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -690,6 +697,7 @@
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PASEMI is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_I2C_SIS5595 is not set
@@ -804,6 +812,7 @@
# HID Devices
#
CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
#
# USB support
@@ -868,6 +877,10 @@
#
#
+# Auxiliary Display support
+#
+
+#
# Virtualization
#
@@ -1011,7 +1024,8 @@
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_PLIST=y
-CONFIG_IOMAP_COPY=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
#
# Instrumentation Support
@@ -1060,8 +1074,10 @@
# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
@@ -1075,6 +1091,7 @@
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
#
diff --git a/arch/powerpc/configs/mpc8568mds_defconfig b/arch/powerpc/configs/mpc8568mds_defconfig
index 058e06d..7b38006 100644
--- a/arch/powerpc/configs/mpc8568mds_defconfig
+++ b/arch/powerpc/configs/mpc8568mds_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20-rc5
-# Wed Feb 7 23:54:25 2007
+# Linux kernel version: 2.6.20
+# Sat Feb 17 16:26:53 2007
#
# CONFIG_PPC64 is not set
CONFIG_PPC32=y
@@ -34,9 +34,9 @@
# CONFIG_PPC_83xx is not set
CONFIG_PPC_85xx=y
# CONFIG_PPC_86xx is not set
+# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
-# CONFIG_8xx is not set
# CONFIG_E200 is not set
CONFIG_85xx=y
CONFIG_E500=y
@@ -63,6 +63,7 @@
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
@@ -130,7 +131,7 @@
# CONFIG_MPC8540_ADS is not set
# CONFIG_MPC8560_ADS is not set
# CONFIG_MPC85xx_CDS is not set
-CONFIG_MPC8568_MDS=y
+CONFIG_MPC85xx_MDS=y
CONFIG_MPC85xx=y
CONFIG_PPC_INDIRECT_PCI_BE=y
CONFIG_MPIC=y
@@ -162,6 +163,7 @@
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
@@ -171,6 +173,7 @@
#
# Bus options
#
+CONFIG_ZONE_DMA=y
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
CONFIG_PPC_INDIRECT_PCI=y
@@ -216,6 +219,7 @@
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
@@ -301,6 +305,7 @@
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
#
@@ -341,7 +346,6 @@
#
# Misc devices
#
-# CONFIG_TIFM_CORE is not set
#
# ATA/ATAPI/MFM/RLL support
@@ -543,6 +547,7 @@
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_OF_PLATFORM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -698,6 +703,7 @@
# HID Devices
#
CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
#
# USB support
@@ -760,6 +766,10 @@
#
#
+# Auxiliary Display support
+#
+
+#
# Virtualization
#
@@ -896,7 +906,8 @@
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_PLIST=y
-CONFIG_IOMAP_COPY=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
#
# Instrumentation Support
@@ -914,6 +925,7 @@
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
@@ -922,7 +934,6 @@
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
@@ -932,6 +943,8 @@
# CONFIG_DEBUG_LIST is not set
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUGGER=y
# CONFIG_XMON is not set
# CONFIG_BDI_SWITCH is not set
@@ -943,6 +956,8 @@
# CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE is not set
# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
+# CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set
+# CONFIG_PPC_EARLY_DEBUG_BEAT is not set
#
# Security options
@@ -970,8 +985,10 @@
# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
@@ -985,6 +1002,7 @@
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
#
diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig
index debac66..a8da0ae 100644
--- a/arch/powerpc/configs/ppc64_defconfig
+++ b/arch/powerpc/configs/ppc64_defconfig
@@ -500,7 +500,7 @@
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
-CONFIG_BLK_DEV_SL82C105=y
+# CONFIG_BLK_DEV_SL82C105 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
@@ -646,7 +646,7 @@
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
+CONFIG_PATA_WINBOND=y
#
# Multi-device support (RAID and LVM)
diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig
index 1c794fe..6e96e50 100644
--- a/arch/powerpc/configs/pseries_defconfig
+++ b/arch/powerpc/configs/pseries_defconfig
@@ -483,7 +483,7 @@
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
-CONFIG_BLK_DEV_SL82C105=y
+# CONFIG_BLK_DEV_SL82C105 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
@@ -628,7 +628,7 @@
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
+CONFIG_PATA_WINBOND=y
#
# Multi-device support (RAID and LVM)
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index 3e86e6e..8d52b23 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -1599,6 +1599,7 @@
return pp;
}
+EXPORT_SYMBOL(of_find_property);
/*
* Find a property with a given name for a given node
diff --git a/arch/powerpc/kernel/prom_parse.c b/arch/powerpc/kernel/prom_parse.c
index 12c51e4..ea6fd55 100644
--- a/arch/powerpc/kernel/prom_parse.c
+++ b/arch/powerpc/kernel/prom_parse.c
@@ -5,6 +5,7 @@
#include <linux/pci_regs.h>
#include <linux/module.h>
#include <linux/ioport.h>
+#include <linux/etherdevice.h>
#include <asm/prom.h>
#include <asm/pci-bridge.h>
@@ -1003,3 +1004,42 @@
return res;
}
EXPORT_SYMBOL_GPL(of_irq_map_one);
+
+/**
+ * Search the device tree for the best MAC address to use. 'mac-address' is
+ * checked first, because that is supposed to contain to "most recent" MAC
+ * address. If that isn't set, then 'local-mac-address' is checked next,
+ * because that is the default address. If that isn't set, then the obsolete
+ * 'address' is checked, just in case we're using an old device tree.
+ *
+ * Note that the 'address' property is supposed to contain a virtual address of
+ * the register set, but some DTS files have redefined that property to be the
+ * MAC address.
+ *
+ * All-zero MAC addresses are rejected, because those could be properties that
+ * exist in the device tree, but were not set by U-Boot. For example, the
+ * DTS could define 'mac-address' and 'local-mac-address', with zero MAC
+ * addresses. Some older U-Boots only initialized 'local-mac-address'. In
+ * this case, the real MAC is in 'local-mac-address', and 'mac-address' exists
+ * but is all zeros.
+*/
+const void *of_get_mac_address(struct device_node *np)
+{
+ struct property *pp;
+
+ pp = of_find_property(np, "mac-address", NULL);
+ if (pp && (pp->length == 6) && is_valid_ether_addr(pp->value))
+ return pp->value;
+
+ pp = of_find_property(np, "local-mac-address", NULL);
+ if (pp && (pp->length == 6) && is_valid_ether_addr(pp->value))
+ return pp->value;
+
+ pp = of_find_property(np, "address", NULL);
+ if (pp && (pp->length == 6) && is_valid_ether_addr(pp->value))
+ return pp->value;
+
+ return NULL;
+}
+EXPORT_SYMBOL(of_get_mac_address);
+
diff --git a/arch/powerpc/mm/pgtable_64.c b/arch/powerpc/mm/pgtable_64.c
index 16e4ee1..1d44340 100644
--- a/arch/powerpc/mm/pgtable_64.c
+++ b/arch/powerpc/mm/pgtable_64.c
@@ -103,7 +103,7 @@
*
*/
if (htab_bolt_mapping(ea, ea + PAGE_SIZE, pa, flags,
- mmu_virtual_psize)) {
+ mmu_io_psize)) {
printk(KERN_ERR "Failed to do bolted mapping IO "
"memory at %016lx !\n", pa);
return -ENOMEM;
diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig
index 1aea1e6..713b31a 100644
--- a/arch/powerpc/platforms/83xx/Kconfig
+++ b/arch/powerpc/platforms/83xx/Kconfig
@@ -38,12 +38,12 @@
Be aware that PCI initialization is the bootloader's
responsibility.
-config MPC8360E_PB
- bool "Freescale MPC8360E PB"
+config MPC836x_MDS
+ bool "Freescale MPC836x MDS"
select DEFAULT_UIMAGE
select QUICC_ENGINE
help
- This option enables support for the MPC836x EMDS Processor Board.
+ This option enables support for the MPC836x MDS Processor Board.
endchoice
@@ -69,6 +69,6 @@
bool
select PPC_UDBG_16550
select PPC_INDIRECT_PCI
- default y if MPC8360E_PB
+ default y if MPC836x_MDS
endmenu
diff --git a/arch/powerpc/platforms/83xx/Makefile b/arch/powerpc/platforms/83xx/Makefile
index 6c8199c..dfc970d 100644
--- a/arch/powerpc/platforms/83xx/Makefile
+++ b/arch/powerpc/platforms/83xx/Makefile
@@ -6,5 +6,5 @@
obj-$(CONFIG_MPC8313_RDB) += mpc8313_rdb.o
obj-$(CONFIG_MPC834x_MDS) += mpc834x_mds.o
obj-$(CONFIG_MPC834x_ITX) += mpc834x_itx.o
-obj-$(CONFIG_MPC8360E_PB) += mpc8360e_pb.o
+obj-$(CONFIG_MPC836x_MDS) += mpc836x_mds.o
obj-$(CONFIG_MPC832x_MDS) += mpc832x_mds.o
diff --git a/arch/powerpc/platforms/83xx/mpc8313_rdb.c b/arch/powerpc/platforms/83xx/mpc8313_rdb.c
index c3b98c3..32e9e94 100644
--- a/arch/powerpc/platforms/83xx/mpc8313_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc8313_rdb.c
@@ -74,16 +74,9 @@
*/
static int __init mpc8313_rdb_probe(void)
{
- char *model = of_get_flat_dt_prop(of_get_flat_dt_root(),
- "model", NULL);
- if (model == NULL)
- return 0;
- if (strcmp(model, "MPC8313ERDB"))
- return 0;
+ unsigned long root = of_get_flat_dt_root();
- DBG("MPC8313 RDB found\n");
-
- return 1;
+ return of_flat_dt_is_compatible(root, "MPC8313ERDB");
}
define_machine(mpc8313_rdb) {
diff --git a/arch/powerpc/platforms/83xx/mpc832x_mds.c b/arch/powerpc/platforms/83xx/mpc832x_mds.c
index 3ecb55f..17e3a3c 100644
--- a/arch/powerpc/platforms/83xx/mpc832x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc832x_mds.c
@@ -57,11 +57,6 @@
static u8 *bcsr_regs = NULL;
-u8 *get_bcsr(void)
-{
- return bcsr_regs;
-}
-
/* ************************************************************************
*
* Setup the architecture
@@ -74,17 +69,6 @@
if (ppc_md.progress)
ppc_md.progress("mpc832x_sys_setup_arch()", 0);
- np = of_find_node_by_type(NULL, "cpu");
- if (np != 0) {
- unsigned int *fp =
- (int *)get_property(np, "clock-frequency", NULL);
- if (fp != 0)
- loops_per_jiffy = *fp / HZ;
- else
- loops_per_jiffy = 50000000 / HZ;
- of_node_put(np);
- }
-
/* Map BCSR area */
np = of_find_node_by_name(NULL, "bcsr");
if (np != 0) {
@@ -121,34 +105,23 @@
iounmap(bcsr_regs);
of_node_put(np);
}
-
#endif /* CONFIG_QUICC_ENGINE */
-
-#ifdef CONFIG_BLK_DEV_INITRD
- if (initrd_start)
- ROOT_DEV = Root_RAM0;
- else
-#endif
-#ifdef CONFIG_ROOT_NFS
- ROOT_DEV = Root_NFS;
-#else
- ROOT_DEV = Root_HDA1;
-#endif
}
+static struct of_device_id mpc832x_ids[] = {
+ { .type = "soc", },
+ { .compatible = "soc", },
+ { .type = "qe", },
+ {},
+};
+
static int __init mpc832x_declare_of_platform_devices(void)
{
- struct device_node *np;
+ if (!machine_is(mpc832x_mds))
+ return 0;
- for (np = NULL; (np = of_find_compatible_node(np, "network",
- "ucc_geth")) != NULL;) {
- int ucc_num;
- char bus_id[BUS_ID_SIZE];
-
- ucc_num = *((uint *) get_property(np, "device-id", NULL)) - 1;
- snprintf(bus_id, BUS_ID_SIZE, "ucc_geth.%u", ucc_num);
- of_platform_device_create(np, bus_id, NULL);
- }
+ /* Publish the QE devices */
+ of_platform_bus_probe(NULL, mpc832x_ids, NULL);
return 0;
}
@@ -156,7 +129,6 @@
static void __init mpc832x_sys_init_IRQ(void)
{
-
struct device_node *np;
np = of_find_node_by_type(NULL, "ipic");
@@ -189,6 +161,9 @@
{
struct timespec tv;
+ if (!machine_is(mpc832x_mds))
+ return 0;
+
ppc_md.get_rtc_time = ds1374_get_rtc_time;
ppc_md.set_rtc_time = ds1374_set_rtc_time;
@@ -207,17 +182,9 @@
*/
static int __init mpc832x_sys_probe(void)
{
- char *model = of_get_flat_dt_prop(of_get_flat_dt_root(),
- "model", NULL);
+ unsigned long root = of_get_flat_dt_root();
- if (model == NULL)
- return 0;
- if (strcmp(model, "MPC8323EMDS"))
- return 0;
-
- DBG("%s found\n", model);
-
- return 1;
+ return of_flat_dt_is_compatible(root, "MPC832xMDS");
}
define_machine(mpc832x_mds) {
diff --git a/arch/powerpc/platforms/83xx/mpc834x_itx.c b/arch/powerpc/platforms/83xx/mpc834x_itx.c
index 443a317..3c009f6 100644
--- a/arch/powerpc/platforms/83xx/mpc834x_itx.c
+++ b/arch/powerpc/platforms/83xx/mpc834x_itx.c
@@ -55,28 +55,12 @@
if (ppc_md.progress)
ppc_md.progress("mpc834x_itx_setup_arch()", 0);
- np = of_find_node_by_type(NULL, "cpu");
- if (np != 0) {
- const unsigned int *fp =
- get_property(np, "clock-frequency", NULL);
- if (fp != 0)
- loops_per_jiffy = *fp / HZ;
- else
- loops_per_jiffy = 50000000 / HZ;
- of_node_put(np);
- }
#ifdef CONFIG_PCI
for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;)
add_bridge(np);
ppc_md.pci_exclude_device = mpc83xx_exclude_device;
#endif
-
-#ifdef CONFIG_ROOT_NFS
- ROOT_DEV = Root_NFS;
-#else
- ROOT_DEV = Root_HDA1;
-#endif
}
static void __init mpc834x_itx_init_IRQ(void)
@@ -100,10 +84,9 @@
*/
static int __init mpc834x_itx_probe(void)
{
- /* We always match for now, eventually we should look at the flat
- dev tree to ensure this is the board we are suppose to run on
- */
- return 1;
+ unsigned long root = of_get_flat_dt_root();
+
+ return of_flat_dt_is_compatible(root, "MPC834xMITX");
}
define_machine(mpc834x_itx) {
diff --git a/arch/powerpc/platforms/83xx/mpc834x_mds.c b/arch/powerpc/platforms/83xx/mpc834x_mds.c
index d2736da..e5d8191 100644
--- a/arch/powerpc/platforms/83xx/mpc834x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc834x_mds.c
@@ -125,17 +125,6 @@
if (ppc_md.progress)
ppc_md.progress("mpc834x_mds_setup_arch()", 0);
- np = of_find_node_by_type(NULL, "cpu");
- if (np != 0) {
- const unsigned int *fp =
- get_property(np, "clock-frequency", NULL);
- if (fp != 0)
- loops_per_jiffy = *fp / HZ;
- else
- loops_per_jiffy = 50000000 / HZ;
- of_node_put(np);
- }
-
#ifdef CONFIG_PCI
for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;)
add_bridge(np);
@@ -144,12 +133,6 @@
#endif
mpc834x_usb_cfg();
-
-#ifdef CONFIG_ROOT_NFS
- ROOT_DEV = Root_NFS;
-#else
- ROOT_DEV = Root_HDA1;
-#endif
}
static void __init mpc834x_mds_init_IRQ(void)
@@ -176,6 +159,9 @@
{
struct timespec tv;
+ if (!machine_is(mpc834x_mds))
+ return 0;
+
ppc_md.get_rtc_time = ds1374_get_rtc_time;
ppc_md.set_rtc_time = ds1374_set_rtc_time;
@@ -194,10 +180,9 @@
*/
static int __init mpc834x_mds_probe(void)
{
- /* We always match for now, eventually we should look at the flat
- dev tree to ensure this is the board we are suppose to run on
- */
- return 1;
+ unsigned long root = of_get_flat_dt_root();
+
+ return of_flat_dt_is_compatible(root, "MPC834xMDS");
}
define_machine(mpc834x_mds) {
diff --git a/arch/powerpc/platforms/83xx/mpc8360e_pb.c b/arch/powerpc/platforms/83xx/mpc836x_mds.c
similarity index 67%
rename from arch/powerpc/platforms/83xx/mpc8360e_pb.c
rename to arch/powerpc/platforms/83xx/mpc836x_mds.c
index ccce2f9..526ed09 100644
--- a/arch/powerpc/platforms/83xx/mpc8360e_pb.c
+++ b/arch/powerpc/platforms/83xx/mpc836x_mds.c
@@ -5,12 +5,12 @@
* Yin Olivia <Hong-hua.Yin@freescale.com>
*
* Description:
- * MPC8360E MDS PB board specific routines.
+ * MPC8360E MDS board specific routines.
*
* Changelog:
* Jun 21, 2006 Initial version
*
- * This program is free software; you can redistribute it and/or modify it
+ * This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
@@ -62,33 +62,17 @@
static u8 *bcsr_regs = NULL;
-u8 *get_bcsr(void)
-{
- return bcsr_regs;
-}
-
/* ************************************************************************
*
* Setup the architecture
*
*/
-static void __init mpc8360_sys_setup_arch(void)
+static void __init mpc836x_mds_setup_arch(void)
{
struct device_node *np;
if (ppc_md.progress)
- ppc_md.progress("mpc8360_sys_setup_arch()", 0);
-
- np = of_find_node_by_type(NULL, "cpu");
- if (np != 0) {
- const unsigned int *fp =
- get_property(np, "clock-frequency", NULL);
- if (fp != 0)
- loops_per_jiffy = *fp / HZ;
- else
- loops_per_jiffy = 50000000 / HZ;
- of_node_put(np);
- }
+ ppc_md.progress("mpc836x_mds_setup_arch()", 0);
/* Map BCSR area */
np = of_find_node_by_name(NULL, "bcsr");
@@ -128,40 +112,29 @@
}
#endif /* CONFIG_QUICC_ENGINE */
-
-#ifdef CONFIG_BLK_DEV_INITRD
- if (initrd_start)
- ROOT_DEV = Root_RAM0;
- else
-#endif
-#ifdef CONFIG_ROOT_NFS
- ROOT_DEV = Root_NFS;
-#else
- ROOT_DEV = Root_HDA1;
-#endif
}
-static int __init mpc8360_declare_of_platform_devices(void)
+static struct of_device_id mpc836x_ids[] = {
+ { .type = "soc", },
+ { .compatible = "soc", },
+ { .type = "qe", },
+ {},
+};
+
+static int __init mpc836x_declare_of_platform_devices(void)
{
- struct device_node *np;
+ if (!machine_is(mpc836x_mds))
+ return 0;
- for (np = NULL; (np = of_find_compatible_node(np, "network",
- "ucc_geth")) != NULL;) {
- int ucc_num;
- char bus_id[BUS_ID_SIZE];
-
- ucc_num = *((uint *) get_property(np, "device-id", NULL)) - 1;
- snprintf(bus_id, BUS_ID_SIZE, "ucc_geth.%u", ucc_num);
- of_platform_device_create(np, bus_id, NULL);
- }
+ /* Publish the QE devices */
+ of_platform_bus_probe(NULL, mpc836x_ids, NULL);
return 0;
}
-device_initcall(mpc8360_declare_of_platform_devices);
+device_initcall(mpc836x_declare_of_platform_devices);
-static void __init mpc8360_sys_init_IRQ(void)
+static void __init mpc836x_mds_init_IRQ(void)
{
-
struct device_node *np;
np = of_find_node_by_type(NULL, "ipic");
@@ -194,6 +167,9 @@
{
struct timespec tv;
+ if (!machine_is(mpc836x_mds))
+ return 0;
+
ppc_md.get_rtc_time = ds1374_get_rtc_time;
ppc_md.set_rtc_time = ds1374_set_rtc_time;
@@ -210,28 +186,21 @@
/*
* Called very early, MMU is off, device-tree isn't unflattened
*/
-static int __init mpc8360_sys_probe(void)
+static int __init mpc836x_mds_probe(void)
{
- char *model = of_get_flat_dt_prop(of_get_flat_dt_root(),
- "model", NULL);
- if (model == NULL)
- return 0;
- if (strcmp(model, "MPC8360EPB"))
- return 0;
+ unsigned long root = of_get_flat_dt_root();
- DBG("MPC8360EMDS-PB found\n");
-
- return 1;
+ return of_flat_dt_is_compatible(root, "MPC836xMDS");
}
-define_machine(mpc8360_sys) {
- .name = "MPC8360E PB",
- .probe = mpc8360_sys_probe,
- .setup_arch = mpc8360_sys_setup_arch,
- .init_IRQ = mpc8360_sys_init_IRQ,
- .get_irq = ipic_get_irq,
- .restart = mpc83xx_restart,
- .time_init = mpc83xx_time_init,
+define_machine(mpc836x_mds) {
+ .name = "MPC836x MDS",
+ .probe = mpc836x_mds_probe,
+ .setup_arch = mpc836x_mds_setup_arch,
+ .init_IRQ = mpc836x_mds_init_IRQ,
+ .get_irq = ipic_get_irq,
+ .restart = mpc83xx_restart,
+ .time_init = mpc83xx_time_init,
.calibrate_decr = generic_calibrate_decr,
- .progress = udbg_progress,
+ .progress = udbg_progress,
};
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index 0efdd2f..eb661cc 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -23,12 +23,12 @@
help
This option enables support for the MPC85xx CDS board
-config MPC8568_MDS
- bool "Freescale MPC8568 MDS"
+config MPC85xx_MDS
+ bool "Freescale MPC85xx MDS"
select DEFAULT_UIMAGE
# select QUICC_ENGINE
help
- This option enables support for the MPC8568 MDS board
+ This option enables support for the MPC85xx MDS board
endchoice
@@ -47,7 +47,7 @@
bool
select PPC_UDBG_16550
select PPC_INDIRECT_PCI
- default y if MPC8540_ADS || MPC85xx_CDS || MPC8560_ADS || MPC8568_MDS
+ default y if MPC8540_ADS || MPC85xx_CDS || MPC8560_ADS || MPC85xx_MDS
config PPC_INDIRECT_PCI_BE
bool
diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile
index e40e521..4e63917 100644
--- a/arch/powerpc/platforms/85xx/Makefile
+++ b/arch/powerpc/platforms/85xx/Makefile
@@ -5,4 +5,4 @@
obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads.o
obj-$(CONFIG_MPC8560_ADS) += mpc85xx_ads.o
obj-$(CONFIG_MPC85xx_CDS) += mpc85xx_cds.o
-obj-$(CONFIG_MPC8568_MDS) += mpc8568_mds.o
+obj-$(CONFIG_MPC85xx_MDS) += mpc85xx_mds.o
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ads.c b/arch/powerpc/platforms/85xx/mpc85xx_ads.c
index c56fce5..8ed034a 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_ads.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ads.c
@@ -17,7 +17,6 @@
#include <linux/kdev_t.h>
#include <linux/delay.h>
#include <linux/seq_file.h>
-#include <linux/root_dev.h>
#include <asm/system.h>
#include <asm/time.h>
@@ -245,12 +244,6 @@
add_bridge(np);
ppc_md.pci_exclude_device = mpc85xx_exclude_device;
#endif
-
-#ifdef CONFIG_ROOT_NFS
- ROOT_DEV = Root_NFS;
-#else
- ROOT_DEV = Root_HDA1;
-#endif
}
static void mpc85xx_ads_show_cpuinfo(struct seq_file *m)
@@ -279,10 +272,9 @@
*/
static int __init mpc85xx_ads_probe(void)
{
- /* We always match for now, eventually we should look at the flat
- dev tree to ensure this is the board we are suppose to run on
- */
- return 1;
+ unsigned long root = of_get_flat_dt_root();
+
+ return of_flat_dt_is_compatible(root, "MPC85xxADS");
}
define_machine(mpc85xx_ads) {
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_cds.c b/arch/powerpc/platforms/85xx/mpc85xx_cds.c
index abc0aca..4232686 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_cds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_cds.c
@@ -22,7 +22,6 @@
#include <linux/console.h>
#include <linux/delay.h>
#include <linux/seq_file.h>
-#include <linux/root_dev.h>
#include <linux/initrd.h>
#include <linux/module.h>
#include <linux/fsl_devices.h>
@@ -263,12 +262,6 @@
ppc_md.pcibios_fixup = mpc85xx_cds_pcibios_fixup;
ppc_md.pci_exclude_device = mpc85xx_exclude_device;
#endif
-
-#ifdef CONFIG_ROOT_NFS
- ROOT_DEV = Root_NFS;
-#else
- ROOT_DEV = Root_HDA1;
-#endif
}
static void mpc85xx_cds_show_cpuinfo(struct seq_file *m)
@@ -298,11 +291,9 @@
*/
static int __init mpc85xx_cds_probe(void)
{
- /* We always match for now, eventually we should look at
- * the flat dev tree to ensure this is the board we are
- * supposed to run on
- */
- return 1;
+ unsigned long root = of_get_flat_dt_root();
+
+ return of_flat_dt_is_compatible(root, "MPC85xxCDS");
}
define_machine(mpc85xx_cds) {
diff --git a/arch/powerpc/platforms/85xx/mpc8568_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
similarity index 84%
rename from arch/powerpc/platforms/85xx/mpc8568_mds.c
rename to arch/powerpc/platforms/85xx/mpc85xx_mds.c
index 0861d11..81144d2 100644
--- a/arch/powerpc/platforms/85xx/mpc8568_mds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
@@ -8,7 +8,7 @@
* Yin Olivia <Hong-hua.Yin@freescale.com>
*
* Description:
- * MPC8568E MDS PB board specific routines.
+ * MPC85xx MDS board specific routines.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -27,7 +27,6 @@
#include <linux/console.h>
#include <linux/delay.h>
#include <linux/seq_file.h>
-#include <linux/root_dev.h>
#include <linux/initrd.h>
#include <linux/module.h>
#include <linux/fsl_devices.h>
@@ -70,14 +69,13 @@
* Setup the architecture
*
*/
-static void __init mpc8568_mds_setup_arch(void)
+static void __init mpc85xx_mds_setup_arch(void)
{
struct device_node *np;
static u8 *bcsr_regs = NULL;
-
if (ppc_md.progress)
- ppc_md.progress("mpc8568_mds_setup_arch()", 0);
+ ppc_md.progress("mpc85xx_mds_setup_arch()", 0);
np = of_find_node_by_type(NULL, "cpu");
if (np != NULL) {
@@ -145,26 +143,26 @@
#endif /* CONFIG_QUICC_ENGINE */
}
-static struct of_device_id mpc8568_ids[] = {
+static struct of_device_id mpc85xx_ids[] = {
{ .type = "soc", },
{ .compatible = "soc", },
{ .type = "qe", },
{},
};
-static int __init mpc8568_publish_devices(void)
+static int __init mpc85xx_publish_devices(void)
{
- if (!machine_is(mpc8568_mds))
+ if (!machine_is(mpc85xx_mds))
return 0;
/* Publish the QE devices */
- of_platform_bus_probe(NULL,mpc8568_ids,NULL);
+ of_platform_bus_probe(NULL,mpc85xx_ids,NULL);
return 0;
}
-device_initcall(mpc8568_publish_devices);
+device_initcall(mpc85xx_publish_devices);
-static void __init mpc8568_mds_pic_init(void)
+static void __init mpc85xx_mds_pic_init(void)
{
struct mpic *mpic;
struct resource r;
@@ -207,7 +205,6 @@
mpic_init(mpic);
-
#ifdef CONFIG_QUICC_ENGINE
np = of_find_node_by_type(NULL, "qeic");
if (!np)
@@ -218,27 +215,18 @@
#endif /* CONFIG_QUICC_ENGINE */
}
-
-static int __init mpc8568_mds_probe(void)
+static int __init mpc85xx_mds_probe(void)
{
- char *model = of_get_flat_dt_prop(of_get_flat_dt_root(),
- "model", NULL);
- if (model == NULL)
- return 0;
- if (strcmp(model, "MPC8568EMDS"))
- return 0;
+ unsigned long root = of_get_flat_dt_root();
- DBG("MPC8568EMDS found\n");
-
- return 1;
+ return of_flat_dt_is_compatible(root, "MPC85xxMDS");
}
-
-define_machine(mpc8568_mds) {
- .name = "MPC8568E MDS",
- .probe = mpc8568_mds_probe,
- .setup_arch = mpc8568_mds_setup_arch,
- .init_IRQ = mpc8568_mds_pic_init,
+define_machine(mpc85xx_mds) {
+ .name = "MPC85xx MDS",
+ .probe = mpc85xx_mds_probe,
+ .setup_arch = mpc85xx_mds_setup_arch,
+ .init_IRQ = mpc85xx_mds_pic_init,
.get_irq = mpic_get_irq,
.restart = mpc85xx_restart,
.calibrate_decr = generic_calibrate_decr,
diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
index f4dd5f2..f42f801 100644
--- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
+++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
@@ -18,7 +18,6 @@
#include <linux/kdev_t.h>
#include <linux/delay.h>
#include <linux/seq_file.h>
-#include <linux/root_dev.h>
#include <asm/system.h>
#include <asm/time.h>
@@ -120,6 +119,8 @@
DBG("mpc86xxhpcn: cascade mapped to irq %d\n", cascade_irq);
i8259_init(cascade_node, 0);
+ of_node_put(cascade_node);
+
set_irq_chained_handler(cascade_irq, mpc86xx_8259_cascade);
#endif
}
@@ -365,12 +366,6 @@
printk("MPC86xx HPCN board from Freescale Semiconductor\n");
-#ifdef CONFIG_ROOT_NFS
- ROOT_DEV = Root_NFS;
-#else
- ROOT_DEV = Root_HDA1;
-#endif
-
#ifdef CONFIG_SMP
mpc86xx_smp_init();
#endif
diff --git a/arch/powerpc/platforms/celleb/Makefile b/arch/powerpc/platforms/celleb/Makefile
index 3baf658..f4f8252 100644
--- a/arch/powerpc/platforms/celleb/Makefile
+++ b/arch/powerpc/platforms/celleb/Makefile
@@ -1,9 +1,8 @@
obj-y += interrupt.o iommu.o setup.o \
htab.o beat.o pci.o \
- scc_epci.o hvCall.o
+ scc_epci.o scc_uhc.o hvCall.o
obj-$(CONFIG_SMP) += smp.o
obj-$(CONFIG_PPC_UDBG_BEAT) += udbg_beat.o
-obj-$(CONFIG_USB) += scc_uhc.o
obj-$(CONFIG_HAS_TXX9_SERIAL) += scc_sio.o
obj-$(CONFIG_SPU_BASE) += spu_priv1.o
diff --git a/arch/powerpc/platforms/celleb/setup.c b/arch/powerpc/platforms/celleb/setup.c
index 1de63ac..5f4d0d9 100644
--- a/arch/powerpc/platforms/celleb/setup.c
+++ b/arch/powerpc/platforms/celleb/setup.c
@@ -137,10 +137,12 @@
return -ENODEV;
}
+#ifdef CONFIG_KEXEC
static void celleb_kexec_cpu_down(int crash, int secondary)
{
beatic_deinit_IRQ();
}
+#endif
static struct of_device_id celleb_bus_ids[] = {
{ .type = "scc", },
diff --git a/arch/powerpc/platforms/ps3/Kconfig b/arch/powerpc/platforms/ps3/Kconfig
index 4be3943..d270a1e 100644
--- a/arch/powerpc/platforms/ps3/Kconfig
+++ b/arch/powerpc/platforms/ps3/Kconfig
@@ -62,4 +62,14 @@
This support is required for graphics and sound. In
general, all users will say Y or M.
+config PS3_SYS_MANAGER
+ bool "PS3 System Manager driver"
+ select PS3_VUART
+ default y
+ help
+ Include support for the PS3 System Manager.
+
+ This support is required for system control. In
+ general, all users will say Y.
+
endmenu
diff --git a/arch/powerpc/platforms/ps3/setup.c b/arch/powerpc/platforms/ps3/setup.c
index 13d669a..ac5df96 100644
--- a/arch/powerpc/platforms/ps3/setup.c
+++ b/arch/powerpc/platforms/ps3/setup.c
@@ -42,6 +42,10 @@
#define DBG(fmt...) do{if(0)printk(fmt);}while(0)
#endif
+#if !defined(CONFIG_SMP)
+static void smp_send_stop(void) {}
+#endif
+
int ps3_get_firmware_version(union ps3_firmware_version *v)
{
int result = lv1_get_version_info(&v->raw);
@@ -66,22 +70,35 @@
lv1_pause(0);
}
+static void ps3_restart(char *cmd)
+{
+ DBG("%s:%d cmd '%s'\n", __func__, __LINE__, cmd);
+
+ smp_send_stop();
+ ps3_sys_manager_restart(); /* never returns */
+}
+
+static void ps3_power_off(void)
+{
+ DBG("%s:%d\n", __func__, __LINE__);
+
+ smp_send_stop();
+ ps3_sys_manager_power_off(); /* never returns */
+}
+
static void ps3_panic(char *str)
{
DBG("%s:%d %s\n", __func__, __LINE__, str);
-#ifdef CONFIG_SMP
smp_send_stop();
-#endif
printk("\n");
printk(" System does not reboot automatically.\n");
printk(" Please press POWER button.\n");
printk("\n");
- for (;;) ;
+ while(1);
}
-
static void prealloc(struct ps3_prealloc *p)
{
if (!p->size)
@@ -219,6 +236,8 @@
.get_rtc_time = ps3_get_rtc_time,
.calibrate_decr = ps3_calibrate_decr,
.progress = ps3_progress,
+ .restart = ps3_restart,
+ .power_off = ps3_power_off,
#if defined(CONFIG_KEXEC)
.kexec_cpu_down = ps3_kexec_cpu_down,
.machine_kexec = ps3_machine_kexec,
diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile
index dc0583b..2dfd050 100644
--- a/arch/powerpc/platforms/pseries/Makefile
+++ b/arch/powerpc/platforms/pseries/Makefile
@@ -4,7 +4,7 @@
obj-y := pci.o lpar.o hvCall.o nvram.o reconfig.o \
setup.o iommu.o ras.o rtasd.o pci_dlpar.o \
- firmware.o
+ firmware.o power.o
obj-$(CONFIG_SMP) += smp.o
obj-$(CONFIG_XICS) += xics.o
obj-$(CONFIG_SCANLOG) += scanlog.o
diff --git a/arch/powerpc/platforms/pseries/power.c b/arch/powerpc/platforms/pseries/power.c
new file mode 100644
index 0000000..2624b71
--- /dev/null
+++ b/arch/powerpc/platforms/pseries/power.c
@@ -0,0 +1,87 @@
+/*
+ * Interface for power-management for ppc64 compliant platform
+ *
+ * Manish Ahuja <mahuja@us.ibm.com>
+ *
+ * Feb 2007
+ *
+ * Copyright (C) 2007 IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/kobject.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+
+unsigned long rtas_poweron_auto; /* default and normal state is 0 */
+
+static ssize_t auto_poweron_show(struct subsystem *subsys, char *buf)
+{
+ return sprintf(buf, "%lu\n", rtas_poweron_auto);
+}
+
+static ssize_t
+auto_poweron_store(struct subsystem *subsys, const char *buf, size_t n)
+{
+ int ret;
+ unsigned long ups_restart;
+ ret = sscanf(buf, "%lu", &ups_restart);
+
+ if ((ret == 1) && ((ups_restart == 1) || (ups_restart == 0))){
+ rtas_poweron_auto = ups_restart;
+ return n;
+ }
+ return -EINVAL;
+}
+
+static struct subsys_attribute auto_poweron_attr = {
+ .attr = {
+ .name = __stringify(auto_poweron),
+ .mode = 0644,
+ },
+ .show = auto_poweron_show,
+ .store = auto_poweron_store,
+};
+
+#ifndef CONFIG_PM
+decl_subsys(power,NULL,NULL);
+
+static struct attribute *g[] = {
+ &auto_poweron_attr.attr,
+ NULL,
+};
+
+static struct attribute_group attr_group = {
+ .attrs = g,
+};
+
+static int __init pm_init(void)
+{
+ int error = subsystem_register(&power_subsys);
+ if (!error)
+ error = sysfs_create_group(&power_subsys.kset.kobj,&attr_group);
+ return error;
+}
+core_initcall(pm_init);
+#else
+extern struct subsystem power_subsys;
+
+static int __init apo_pm_init(void)
+{
+ return (subsys_create_file(&power_subsys, &auto_poweron_attr));
+}
+__initcall(apo_pm_init);
+#endif
diff --git a/arch/powerpc/platforms/pseries/pseries.h b/arch/powerpc/platforms/pseries/pseries.h
index b43f139..22bc019 100644
--- a/arch/powerpc/platforms/pseries/pseries.h
+++ b/arch/powerpc/platforms/pseries/pseries.h
@@ -29,8 +29,11 @@
extern void setup_kexec_cpu_down_xics(void);
extern void setup_kexec_cpu_down_mpic(void);
#else
-static inline setup_kexec_cpu_down_xics(void) { };
-static inline setup_kexec_cpu_down_mpic(void) { };
+static inline void setup_kexec_cpu_down_xics(void) { }
+static inline void setup_kexec_cpu_down_mpic(void) { }
#endif
+/* Poweron flag used for enabling auto ups restart */
+extern unsigned long rtas_poweron_auto;
+
#endif /* _PSERIES_PSERIES_H */
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index 435a045..34aff47 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -486,6 +486,34 @@
return PCI_PROBE_NORMAL;
}
+/**
+ * pSeries_power_off - tell firmware about how to power off the system.
+ *
+ * This function calls either the power-off rtas token in normal cases
+ * or the ibm,power-off-ups token (if present & requested) in case of
+ * a power failure. If power-off token is used, power on will only be
+ * possible with power button press. If ibm,power-off-ups token is used
+ * it will allow auto poweron after power is restored.
+ */
+void pSeries_power_off(void)
+{
+ int rc;
+ int rtas_poweroff_ups_token = rtas_token("ibm,power-off-ups");
+
+ if (rtas_flash_term_hook)
+ rtas_flash_term_hook(SYS_POWER_OFF);
+
+ if (rtas_poweron_auto == 0 ||
+ rtas_poweroff_ups_token == RTAS_UNKNOWN_SERVICE) {
+ rc = rtas_call(rtas_token("power-off"), 2, 1, NULL, -1, -1);
+ printk(KERN_INFO "RTAS power-off returned %d\n", rc);
+ } else {
+ rc = rtas_call(rtas_poweroff_ups_token, 0, 1, NULL);
+ printk(KERN_INFO "RTAS ibm,power-off-ups returned %d\n", rc);
+ }
+ for (;;);
+}
+
define_machine(pseries) {
.name = "pSeries",
.probe = pSeries_probe,
@@ -496,7 +524,7 @@
.pcibios_fixup = pSeries_final_fixup,
.pci_probe_mode = pSeries_pci_probe_mode,
.restart = rtas_restart,
- .power_off = rtas_power_off,
+ .power_off = pSeries_power_off,
.halt = rtas_halt,
.panic = rtas_os_term,
.get_boot_time = rtas_get_boot_time,
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index 85dcdf1..26ca3ff 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -7,6 +7,7 @@
obj-$(CONFIG_PPC_MPC106) += grackle.o
obj-$(CONFIG_PPC_DCR) += dcr.o
obj-$(CONFIG_PPC_DCR_NATIVE) += dcr-low.o
+obj-$(CONFIG_PPC_PMI) += pmi.o
obj-$(CONFIG_U3_DART) += dart_iommu.o
obj-$(CONFIG_MMIO_NVRAM) += mmio_nvram.o
obj-$(CONFIG_FSL_SOC) += fsl_soc.o
diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c
index 34161bc..d20f0292 100644
--- a/arch/powerpc/sysdev/fsl_soc.c
+++ b/arch/powerpc/sysdev/fsl_soc.c
@@ -233,14 +233,7 @@
goto err;
}
- mac_addr = get_property(np, "local-mac-address", NULL);
- if (mac_addr == NULL)
- mac_addr = get_property(np, "mac-address", NULL);
- if (mac_addr == NULL) {
- /* Obsolete */
- mac_addr = get_property(np, "address", NULL);
- }
-
+ mac_addr = of_get_mac_address(np);
if (mac_addr)
memcpy(gfar_data.mac_addr, mac_addr, 6);
@@ -646,8 +639,9 @@
goto unreg;
}
- mac_addr = get_property(np, "mac-address", NULL);
- memcpy(fs_enet_data.macaddr, mac_addr, 6);
+ mac_addr = of_get_mac_address(np);
+ if (mac_addr)
+ memcpy(fs_enet_data.macaddr, mac_addr, 6);
ph = get_property(np, "phy-handle", NULL);
phy = of_find_node_by_phandle(*ph);
@@ -931,8 +925,9 @@
goto err;
r[0].name = enet_regs;
- mac_addr = (void *)get_property(np, "mac-address", NULL);
- memcpy(fs_enet_data.macaddr, mac_addr, 6);
+ mac_addr = of_get_mac_address(np);
+ if (mac_addr)
+ memcpy(fs_enet_data.macaddr, mac_addr, 6);
ph = (phandle *) get_property(np, "phy-handle", NULL);
if (ph != NULL)
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index 4e54a09..bcfb900 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -1370,7 +1370,7 @@
printk(KERN_ERR "Failed to map IPI %d\n", i);
break;
}
- request_irq(vipi, mpic_ipi_action, IRQF_DISABLED,
+ request_irq(vipi, mpic_ipi_action, IRQF_DISABLED|IRQF_PERCPU,
ipi_names[i], mpic);
}
}
diff --git a/arch/powerpc/sysdev/pmi.c b/arch/powerpc/sysdev/pmi.c
new file mode 100644
index 0000000..a528201
--- /dev/null
+++ b/arch/powerpc/sysdev/pmi.c
@@ -0,0 +1,305 @@
+/*
+ * pmi driver
+ *
+ * (C) Copyright IBM Deutschland Entwicklung GmbH 2005
+ *
+ * PMI (Platform Management Interrupt) is a way to communicate
+ * with the BMC (Baseboard Management Controller) via interrupts.
+ * Unlike IPMI it is bidirectional and has a low latency.
+ *
+ * Author: Christian Krafft <krafft@de.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/completion.h>
+#include <linux/spinlock.h>
+#include <linux/workqueue.h>
+
+#include <asm/of_device.h>
+#include <asm/of_platform.h>
+#include <asm/io.h>
+#include <asm/pmi.h>
+
+
+struct pmi_data {
+ struct list_head handler;
+ spinlock_t handler_spinlock;
+ spinlock_t pmi_spinlock;
+ struct mutex msg_mutex;
+ pmi_message_t msg;
+ struct completion *completion;
+ struct of_device *dev;
+ int irq;
+ u8 __iomem *pmi_reg;
+ struct work_struct work;
+};
+
+
+
+static void __iomem *of_iomap(struct device_node *np)
+{
+ struct resource res;
+
+ if (of_address_to_resource(np, 0, &res))
+ return NULL;
+
+ pr_debug("Resource start: 0x%lx\n", res.start);
+ pr_debug("Resource end: 0x%lx\n", res.end);
+
+ return ioremap(res.start, 1 + res.end - res.start);
+}
+
+
+static int pmi_irq_handler(int irq, void *dev_id)
+{
+ struct pmi_data *data;
+ u8 type;
+ int rc;
+
+ data = dev_id;
+
+ spin_lock(&data->pmi_spinlock);
+
+ type = ioread8(data->pmi_reg + PMI_READ_TYPE);
+ pr_debug("pmi: got message of type %d\n", type);
+
+ if (type & PMI_ACK && !data->completion) {
+ printk(KERN_WARNING "pmi: got unexpected ACK message.\n");
+ rc = -EIO;
+ goto unlock;
+ }
+
+ if (data->completion && !(type & PMI_ACK)) {
+ printk(KERN_WARNING "pmi: expected ACK, but got %d\n", type);
+ rc = -EIO;
+ goto unlock;
+ }
+
+ data->msg.type = type;
+ data->msg.data0 = ioread8(data->pmi_reg + PMI_READ_DATA0);
+ data->msg.data1 = ioread8(data->pmi_reg + PMI_READ_DATA1);
+ data->msg.data2 = ioread8(data->pmi_reg + PMI_READ_DATA2);
+ rc = 0;
+unlock:
+ spin_unlock(&data->pmi_spinlock);
+
+ if (rc == -EIO) {
+ rc = IRQ_HANDLED;
+ goto out;
+ }
+
+ if (data->msg.type & PMI_ACK) {
+ complete(data->completion);
+ rc = IRQ_HANDLED;
+ goto out;
+ }
+
+ schedule_work(&data->work);
+
+ rc = IRQ_HANDLED;
+out:
+ return rc;
+}
+
+
+static struct of_device_id pmi_match[] = {
+ { .type = "ibm,pmi", .name = "ibm,pmi" },
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, pmi_match);
+
+static void pmi_notify_handlers(struct work_struct *work)
+{
+ struct pmi_data *data;
+ struct pmi_handler *handler;
+
+ data = container_of(work, struct pmi_data, work);
+
+ spin_lock(&data->handler_spinlock);
+ list_for_each_entry(handler, &data->handler, node) {
+ pr_debug(KERN_INFO "pmi: notifying handler %p\n", handler);
+ if (handler->type == data->msg.type)
+ handler->handle_pmi_message(data->dev, data->msg);
+ }
+ spin_unlock(&data->handler_spinlock);
+}
+
+static int pmi_of_probe(struct of_device *dev,
+ const struct of_device_id *match)
+{
+ struct device_node *np = dev->node;
+ struct pmi_data *data;
+ int rc;
+
+ data = kzalloc(sizeof(struct pmi_data), GFP_KERNEL);
+ if (!data) {
+ printk(KERN_ERR "pmi: could not allocate memory.\n");
+ rc = -ENOMEM;
+ goto out;
+ }
+
+ data->pmi_reg = of_iomap(np);
+ if (!data->pmi_reg) {
+ printk(KERN_ERR "pmi: invalid register address.\n");
+ rc = -EFAULT;
+ goto error_cleanup_data;
+ }
+
+ INIT_LIST_HEAD(&data->handler);
+
+ mutex_init(&data->msg_mutex);
+ spin_lock_init(&data->pmi_spinlock);
+ spin_lock_init(&data->handler_spinlock);
+
+ INIT_WORK(&data->work, pmi_notify_handlers);
+
+ dev->dev.driver_data = data;
+ data->dev = dev;
+
+ data->irq = irq_of_parse_and_map(np, 0);
+ if (data->irq == NO_IRQ) {
+ printk(KERN_ERR "pmi: invalid interrupt.\n");
+ rc = -EFAULT;
+ goto error_cleanup_iomap;
+ }
+
+ rc = request_irq(data->irq, pmi_irq_handler, 0, "pmi", data);
+ if (rc) {
+ printk(KERN_ERR "pmi: can't request IRQ %d: returned %d\n",
+ data->irq, rc);
+ goto error_cleanup_iomap;
+ }
+
+ printk(KERN_INFO "pmi: found pmi device at addr %p.\n", data->pmi_reg);
+
+ goto out;
+
+error_cleanup_iomap:
+ iounmap(data->pmi_reg);
+
+error_cleanup_data:
+ kfree(data);
+
+out:
+ return rc;
+}
+
+static int pmi_of_remove(struct of_device *dev)
+{
+ struct pmi_data *data;
+ struct pmi_handler *handler, *tmp;
+
+ data = dev->dev.driver_data;
+
+ free_irq(data->irq, data);
+ iounmap(data->pmi_reg);
+
+ spin_lock(&data->handler_spinlock);
+
+ list_for_each_entry_safe(handler, tmp, &data->handler, node)
+ list_del(&handler->node);
+
+ spin_unlock(&data->handler_spinlock);
+
+ kfree(dev->dev.driver_data);
+
+ return 0;
+}
+
+static struct of_platform_driver pmi_of_platform_driver = {
+ .name = "pmi",
+ .match_table = pmi_match,
+ .probe = pmi_of_probe,
+ .remove = pmi_of_remove
+};
+
+static int __init pmi_module_init(void)
+{
+ return of_register_platform_driver(&pmi_of_platform_driver);
+}
+module_init(pmi_module_init);
+
+static void __exit pmi_module_exit(void)
+{
+ of_unregister_platform_driver(&pmi_of_platform_driver);
+}
+module_exit(pmi_module_exit);
+
+void pmi_send_message(struct of_device *device, pmi_message_t msg)
+{
+ struct pmi_data *data;
+ unsigned long flags;
+ DECLARE_COMPLETION_ONSTACK(completion);
+
+ data = device->dev.driver_data;
+
+ mutex_lock(&data->msg_mutex);
+
+ data->msg = msg;
+ pr_debug("pmi_send_message: msg is %08x\n", *(u32*)&msg);
+
+ data->completion = &completion;
+
+ spin_lock_irqsave(&data->pmi_spinlock, flags);
+ iowrite8(msg.data0, data->pmi_reg + PMI_WRITE_DATA0);
+ iowrite8(msg.data1, data->pmi_reg + PMI_WRITE_DATA1);
+ iowrite8(msg.data2, data->pmi_reg + PMI_WRITE_DATA2);
+ iowrite8(msg.type, data->pmi_reg + PMI_WRITE_TYPE);
+ spin_unlock_irqrestore(&data->pmi_spinlock, flags);
+
+ pr_debug("pmi_send_message: wait for completion\n");
+
+ wait_for_completion_interruptible_timeout(data->completion,
+ PMI_TIMEOUT);
+
+ data->completion = NULL;
+
+ mutex_unlock(&data->msg_mutex);
+}
+EXPORT_SYMBOL_GPL(pmi_send_message);
+
+void pmi_register_handler(struct of_device *device,
+ struct pmi_handler *handler)
+{
+ struct pmi_data *data;
+ data = device->dev.driver_data;
+
+ spin_lock(&data->handler_spinlock);
+ list_add_tail(&handler->node, &data->handler);
+ spin_unlock(&data->handler_spinlock);
+}
+EXPORT_SYMBOL_GPL(pmi_register_handler);
+
+void pmi_unregister_handler(struct of_device *device,
+ struct pmi_handler *handler)
+{
+ struct pmi_data *data;
+
+ pr_debug("pmi: unregistering handler %p\n", handler);
+
+ data = device->dev.driver_data;
+
+ spin_lock(&data->handler_spinlock);
+ list_del(&handler->node);
+ spin_unlock(&data->handler_spinlock);
+}
+EXPORT_SYMBOL_GPL(pmi_unregister_handler);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Christian Krafft <krafft@de.ibm.com>");
+MODULE_DESCRIPTION("IBM Platform Management Interrupt driver");
diff --git a/arch/powerpc/sysdev/qe_lib/ucc_fast.c b/arch/powerpc/sysdev/qe_lib/ucc_fast.c
index e657559..a457ac1 100644
--- a/arch/powerpc/sysdev/qe_lib/ucc_fast.c
+++ b/arch/powerpc/sysdev/qe_lib/ucc_fast.c
@@ -1,13 +1,12 @@
/*
- * arch/powerpc/sysdev/qe_lib/ucc_fast.c
- *
- * QE UCC Fast API Set - UCC Fast specific routines implementations.
- *
* Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
*
* Authors: Shlomi Gridish <gridish@freescale.com>
* Li Yang <leoli@freescale.com>
*
+ * Description:
+ * QE UCC Fast API Set - UCC Fast specific routines implementations.
+ *
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
@@ -27,79 +26,61 @@
#include <asm/ucc.h>
#include <asm/ucc_fast.h>
-#define uccf_printk(level, format, arg...) \
- printk(level format "\n", ## arg)
-
-#define uccf_dbg(format, arg...) \
- uccf_printk(KERN_DEBUG , format , ## arg)
-#define uccf_err(format, arg...) \
- uccf_printk(KERN_ERR , format , ## arg)
-#define uccf_info(format, arg...) \
- uccf_printk(KERN_INFO , format , ## arg)
-#define uccf_warn(format, arg...) \
- uccf_printk(KERN_WARNING , format , ## arg)
-
-#ifdef UCCF_VERBOSE_DEBUG
-#define uccf_vdbg uccf_dbg
-#else
-#define uccf_vdbg(fmt, args...) do { } while (0)
-#endif /* UCCF_VERBOSE_DEBUG */
-
void ucc_fast_dump_regs(struct ucc_fast_private * uccf)
{
- uccf_info("UCC%d Fast registers:", uccf->uf_info->ucc_num);
- uccf_info("Base address: 0x%08x", (u32) uccf->uf_regs);
+ printk(KERN_INFO "UCC%d Fast registers:", uccf->uf_info->ucc_num);
+ printk(KERN_INFO "Base address: 0x%08x", (u32) uccf->uf_regs);
- uccf_info("gumr : addr - 0x%08x, val - 0x%08x",
+ printk(KERN_INFO "gumr : addr - 0x%08x, val - 0x%08x",
(u32) & uccf->uf_regs->gumr, in_be32(&uccf->uf_regs->gumr));
- uccf_info("upsmr : addr - 0x%08x, val - 0x%08x",
+ printk(KERN_INFO "upsmr : addr - 0x%08x, val - 0x%08x",
(u32) & uccf->uf_regs->upsmr, in_be32(&uccf->uf_regs->upsmr));
- uccf_info("utodr : addr - 0x%08x, val - 0x%04x",
+ printk(KERN_INFO "utodr : addr - 0x%08x, val - 0x%04x",
(u32) & uccf->uf_regs->utodr, in_be16(&uccf->uf_regs->utodr));
- uccf_info("udsr : addr - 0x%08x, val - 0x%04x",
+ printk(KERN_INFO "udsr : addr - 0x%08x, val - 0x%04x",
(u32) & uccf->uf_regs->udsr, in_be16(&uccf->uf_regs->udsr));
- uccf_info("ucce : addr - 0x%08x, val - 0x%08x",
+ printk(KERN_INFO "ucce : addr - 0x%08x, val - 0x%08x",
(u32) & uccf->uf_regs->ucce, in_be32(&uccf->uf_regs->ucce));
- uccf_info("uccm : addr - 0x%08x, val - 0x%08x",
+ printk(KERN_INFO "uccm : addr - 0x%08x, val - 0x%08x",
(u32) & uccf->uf_regs->uccm, in_be32(&uccf->uf_regs->uccm));
- uccf_info("uccs : addr - 0x%08x, val - 0x%02x",
+ printk(KERN_INFO "uccs : addr - 0x%08x, val - 0x%02x",
(u32) & uccf->uf_regs->uccs, uccf->uf_regs->uccs);
- uccf_info("urfb : addr - 0x%08x, val - 0x%08x",
+ printk(KERN_INFO "urfb : addr - 0x%08x, val - 0x%08x",
(u32) & uccf->uf_regs->urfb, in_be32(&uccf->uf_regs->urfb));
- uccf_info("urfs : addr - 0x%08x, val - 0x%04x",
+ printk(KERN_INFO "urfs : addr - 0x%08x, val - 0x%04x",
(u32) & uccf->uf_regs->urfs, in_be16(&uccf->uf_regs->urfs));
- uccf_info("urfet : addr - 0x%08x, val - 0x%04x",
+ printk(KERN_INFO "urfet : addr - 0x%08x, val - 0x%04x",
(u32) & uccf->uf_regs->urfet, in_be16(&uccf->uf_regs->urfet));
- uccf_info("urfset: addr - 0x%08x, val - 0x%04x",
+ printk(KERN_INFO "urfset: addr - 0x%08x, val - 0x%04x",
(u32) & uccf->uf_regs->urfset,
in_be16(&uccf->uf_regs->urfset));
- uccf_info("utfb : addr - 0x%08x, val - 0x%08x",
+ printk(KERN_INFO "utfb : addr - 0x%08x, val - 0x%08x",
(u32) & uccf->uf_regs->utfb, in_be32(&uccf->uf_regs->utfb));
- uccf_info("utfs : addr - 0x%08x, val - 0x%04x",
+ printk(KERN_INFO "utfs : addr - 0x%08x, val - 0x%04x",
(u32) & uccf->uf_regs->utfs, in_be16(&uccf->uf_regs->utfs));
- uccf_info("utfet : addr - 0x%08x, val - 0x%04x",
+ printk(KERN_INFO "utfet : addr - 0x%08x, val - 0x%04x",
(u32) & uccf->uf_regs->utfet, in_be16(&uccf->uf_regs->utfet));
- uccf_info("utftt : addr - 0x%08x, val - 0x%04x",
+ printk(KERN_INFO "utftt : addr - 0x%08x, val - 0x%04x",
(u32) & uccf->uf_regs->utftt, in_be16(&uccf->uf_regs->utftt));
- uccf_info("utpt : addr - 0x%08x, val - 0x%04x",
+ printk(KERN_INFO "utpt : addr - 0x%08x, val - 0x%04x",
(u32) & uccf->uf_regs->utpt, in_be16(&uccf->uf_regs->utpt));
- uccf_info("urtry : addr - 0x%08x, val - 0x%08x",
+ printk(KERN_INFO "urtry : addr - 0x%08x, val - 0x%08x",
(u32) & uccf->uf_regs->urtry, in_be32(&uccf->uf_regs->urtry));
- uccf_info("guemr : addr - 0x%08x, val - 0x%02x",
+ printk(KERN_INFO "guemr : addr - 0x%08x, val - 0x%02x",
(u32) & uccf->uf_regs->guemr, uccf->uf_regs->guemr);
}
u32 ucc_fast_get_qe_cr_subblock(int uccf_num)
{
switch (uccf_num) {
- case 0: return QE_CR_SUBBLOCK_UCCFAST1;
+ case 0: return QE_CR_SUBBLOCK_UCCFAST1;
case 1: return QE_CR_SUBBLOCK_UCCFAST2;
case 2: return QE_CR_SUBBLOCK_UCCFAST3;
case 3: return QE_CR_SUBBLOCK_UCCFAST4;
case 4: return QE_CR_SUBBLOCK_UCCFAST5;
case 5: return QE_CR_SUBBLOCK_UCCFAST6;
case 6: return QE_CR_SUBBLOCK_UCCFAST7;
- case 7: return QE_CR_SUBBLOCK_UCCFAST8;
+ case 7: return QE_CR_SUBBLOCK_UCCFAST8;
default: return QE_CR_SUBBLOCK_INVALID;
}
}
@@ -153,84 +134,72 @@
{
struct ucc_fast_private *uccf;
struct ucc_fast *uf_regs;
- u32 gumr = 0;
+ u32 gumr;
int ret;
- uccf_vdbg("%s: IN", __FUNCTION__);
-
if (!uf_info)
return -EINVAL;
/* check if the UCC port number is in range. */
if ((uf_info->ucc_num < 0) || (uf_info->ucc_num > UCC_MAX_NUM - 1)) {
- uccf_err("ucc_fast_init: Illegal UCC number!");
+ printk(KERN_ERR "%s: illegal UCC number", __FUNCTION__);
return -EINVAL;
}
/* Check that 'max_rx_buf_length' is properly aligned (4). */
if (uf_info->max_rx_buf_length & (UCC_FAST_MRBLR_ALIGNMENT - 1)) {
- uccf_err("ucc_fast_init: max_rx_buf_length not aligned.");
+ printk(KERN_ERR "%s: max_rx_buf_length not aligned", __FUNCTION__);
return -EINVAL;
}
/* Validate Virtual Fifo register values */
if (uf_info->urfs < UCC_FAST_URFS_MIN_VAL) {
- uccf_err
- ("ucc_fast_init: Virtual Fifo register urfs too small.");
+ printk(KERN_ERR "%s: urfs is too small", __FUNCTION__);
return -EINVAL;
}
if (uf_info->urfs & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
- uccf_err
- ("ucc_fast_init: Virtual Fifo register urfs not aligned.");
+ printk(KERN_ERR "%s: urfs is not aligned", __FUNCTION__);
return -EINVAL;
}
if (uf_info->urfet & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
- uccf_err
- ("ucc_fast_init: Virtual Fifo register urfet not aligned.");
+ printk(KERN_ERR "%s: urfet is not aligned.", __FUNCTION__);
return -EINVAL;
}
if (uf_info->urfset & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
- uccf_err
- ("ucc_fast_init: Virtual Fifo register urfset not aligned.");
+ printk(KERN_ERR "%s: urfset is not aligned", __FUNCTION__);
return -EINVAL;
}
if (uf_info->utfs & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
- uccf_err
- ("ucc_fast_init: Virtual Fifo register utfs not aligned.");
+ printk(KERN_ERR "%s: utfs is not aligned", __FUNCTION__);
return -EINVAL;
}
if (uf_info->utfet & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
- uccf_err
- ("ucc_fast_init: Virtual Fifo register utfet not aligned.");
+ printk(KERN_ERR "%s: utfet is not aligned", __FUNCTION__);
return -EINVAL;
}
if (uf_info->utftt & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
- uccf_err
- ("ucc_fast_init: Virtual Fifo register utftt not aligned.");
+ printk(KERN_ERR "%s: utftt is not aligned", __FUNCTION__);
return -EINVAL;
}
uccf = kzalloc(sizeof(struct ucc_fast_private), GFP_KERNEL);
if (!uccf) {
- uccf_err
- ("ucc_fast_init: No memory for UCC slow data structure!");
+ printk(KERN_ERR "%s: Cannot allocate private data", __FUNCTION__);
return -ENOMEM;
}
/* Fill fast UCC structure */
uccf->uf_info = uf_info;
/* Set the PHY base address */
- uccf->uf_regs =
- (struct ucc_fast *) ioremap(uf_info->regs, sizeof(struct ucc_fast));
+ uccf->uf_regs = ioremap(uf_info->regs, sizeof(struct ucc_fast));
if (uccf->uf_regs == NULL) {
- uccf_err
- ("ucc_fast_init: No memory map for UCC slow controller!");
+ printk(KERN_ERR "%s: Cannot map UCC registers", __FUNCTION__);
return -ENOMEM;
}
@@ -249,7 +218,7 @@
/* Init Guemr register */
if ((ret = ucc_init_guemr((struct ucc_common *) (uf_regs)))) {
- uccf_err("ucc_fast_init: Could not init the guemr register.");
+ printk(KERN_ERR "%s: cannot init GUEMR", __FUNCTION__);
ucc_fast_free(uccf);
return ret;
}
@@ -258,7 +227,7 @@
if ((ret = ucc_set_type(uf_info->ucc_num,
(struct ucc_common *) (uf_regs),
UCC_SPEED_TYPE_FAST))) {
- uccf_err("ucc_fast_init: Could not set type to fast.");
+ printk(KERN_ERR "%s: cannot set UCC type", __FUNCTION__);
ucc_fast_free(uccf);
return ret;
}
@@ -267,10 +236,9 @@
/* Set GUMR */
/* For more details see the hardware spec. */
- /* gumr starts as zero. */
+ gumr = uf_info->ttx_trx;
if (uf_info->tci)
gumr |= UCC_FAST_GUMR_TCI;
- gumr |= uf_info->ttx_trx;
if (uf_info->cdp)
gumr |= UCC_FAST_GUMR_CDP;
if (uf_info->ctsp)
@@ -298,9 +266,7 @@
uccf->ucc_fast_tx_virtual_fifo_base_offset =
qe_muram_alloc(uf_info->utfs, UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT);
if (IS_MURAM_ERR(uccf->ucc_fast_tx_virtual_fifo_base_offset)) {
- uccf_err
- ("ucc_fast_init: Can not allocate MURAM memory for "
- "struct ucc_fastx_virtual_fifo_base_offset.");
+ printk(KERN_ERR "%s: cannot allocate MURAM for TX FIFO", __FUNCTION__);
uccf->ucc_fast_tx_virtual_fifo_base_offset = 0;
ucc_fast_free(uccf);
return -ENOMEM;
@@ -308,14 +274,11 @@
/* Allocate memory for Rx Virtual Fifo */
uccf->ucc_fast_rx_virtual_fifo_base_offset =
- qe_muram_alloc(uf_info->urfs +
- (u32)
+ qe_muram_alloc(uf_info->urfs +
UCC_FAST_RECEIVE_VIRTUAL_FIFO_SIZE_FUDGE_FACTOR,
UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT);
if (IS_MURAM_ERR(uccf->ucc_fast_rx_virtual_fifo_base_offset)) {
- uccf_err
- ("ucc_fast_init: Can not allocate MURAM memory for "
- "ucc_fast_rx_virtual_fifo_base_offset.");
+ printk(KERN_ERR "%s: cannot allocate MURAM for RX FIFO", __FUNCTION__);
uccf->ucc_fast_rx_virtual_fifo_base_offset = 0;
ucc_fast_free(uccf);
return -ENOMEM;
@@ -342,26 +305,22 @@
/* If NMSI (not Tsa), set Tx and Rx clock. */
if (!uf_info->tsa) {
/* Rx clock routing */
- if (uf_info->rx_clock != QE_CLK_NONE) {
- if (ucc_set_qe_mux_rxtx
- (uf_info->ucc_num, uf_info->rx_clock,
- COMM_DIR_RX)) {
- uccf_err
- ("ucc_fast_init: Illegal value for parameter 'RxClock'.");
- ucc_fast_free(uccf);
- return -EINVAL;
- }
+ if ((uf_info->rx_clock != QE_CLK_NONE) &&
+ ucc_set_qe_mux_rxtx(uf_info->ucc_num, uf_info->rx_clock,
+ COMM_DIR_RX)) {
+ printk(KERN_ERR "%s: illegal value for RX clock",
+ __FUNCTION__);
+ ucc_fast_free(uccf);
+ return -EINVAL;
}
/* Tx clock routing */
- if (uf_info->tx_clock != QE_CLK_NONE) {
- if (ucc_set_qe_mux_rxtx
- (uf_info->ucc_num, uf_info->tx_clock,
- COMM_DIR_TX)) {
- uccf_err
- ("ucc_fast_init: Illegal value for parameter 'TxClock'.");
- ucc_fast_free(uccf);
- return -EINVAL;
- }
+ if ((uf_info->tx_clock != QE_CLK_NONE) &&
+ ucc_set_qe_mux_rxtx(uf_info->ucc_num, uf_info->tx_clock,
+ COMM_DIR_TX)) {
+ printk(KERN_ERR "%s: illegal value for TX clock",
+ __FUNCTION__);
+ ucc_fast_free(uccf);
+ return -EINVAL;
}
}
@@ -370,9 +329,9 @@
/* First, clear anything pending at UCC level,
* otherwise, old garbage may come through
- * as soon as the dam is opened
- * Writing '1' clears
- */
+ * as soon as the dam is opened. */
+
+ /* Writing '1' clears */
out_be32(&uf_regs->ucce, 0xffffffff);
*uccf_ret = uccf;
diff --git a/arch/powerpc/sysdev/qe_lib/ucc_slow.c b/arch/powerpc/sysdev/qe_lib/ucc_slow.c
index 0e97e5c..817df73 100644
--- a/arch/powerpc/sysdev/qe_lib/ucc_slow.c
+++ b/arch/powerpc/sysdev/qe_lib/ucc_slow.c
@@ -19,7 +19,6 @@
#include <linux/stddef.h>
#include <linux/interrupt.h>
-#include <asm/irq.h>
#include <asm/io.h>
#include <asm/immap_qe.h>
#include <asm/qe.h>
@@ -27,24 +26,6 @@
#include <asm/ucc.h>
#include <asm/ucc_slow.h>
-#define uccs_printk(level, format, arg...) \
- printk(level format "\n", ## arg)
-
-#define uccs_dbg(format, arg...) \
- uccs_printk(KERN_DEBUG , format , ## arg)
-#define uccs_err(format, arg...) \
- uccs_printk(KERN_ERR , format , ## arg)
-#define uccs_info(format, arg...) \
- uccs_printk(KERN_INFO , format , ## arg)
-#define uccs_warn(format, arg...) \
- uccs_printk(KERN_WARNING , format , ## arg)
-
-#ifdef UCCS_VERBOSE_DEBUG
-#define uccs_vdbg uccs_dbg
-#else
-#define uccs_vdbg(fmt, args...) do { } while (0)
-#endif /* UCCS_VERBOSE_DEBUG */
-
u32 ucc_slow_get_qe_cr_subblock(int uccs_num)
{
switch (uccs_num) {
@@ -135,51 +116,53 @@
int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** uccs_ret)
{
+ struct ucc_slow_private *uccs;
u32 i;
struct ucc_slow *us_regs;
u32 gumr;
- u8 function_code = 0;
- u8 *bd;
- struct ucc_slow_private *uccs;
+ struct qe_bd *bd;
u32 id;
u32 command;
- int ret;
-
- uccs_vdbg("%s: IN", __FUNCTION__);
+ int ret = 0;
if (!us_info)
return -EINVAL;
/* check if the UCC port number is in range. */
if ((us_info->ucc_num < 0) || (us_info->ucc_num > UCC_MAX_NUM - 1)) {
- uccs_err("ucc_slow_init: Illegal UCC number!");
+ printk(KERN_ERR "%s: illegal UCC number", __FUNCTION__);
return -EINVAL;
}
/*
* Set mrblr
* Check that 'max_rx_buf_length' is properly aligned (4), unless
- * rfw is 1, meaning that QE accepts one byte at a time, unlike normal
+ * rfw is 1, meaning that QE accepts one byte at a time, unlike normal
* case when QE accepts 32 bits at a time.
*/
if ((!us_info->rfw) &&
(us_info->max_rx_buf_length & (UCC_SLOW_MRBLR_ALIGNMENT - 1))) {
- uccs_err("max_rx_buf_length not aligned.");
+ printk(KERN_ERR "max_rx_buf_length not aligned.");
return -EINVAL;
}
uccs = kzalloc(sizeof(struct ucc_slow_private), GFP_KERNEL);
if (!uccs) {
- uccs_err
- ("ucc_slow_init: No memory for UCC slow data structure!");
+ printk(KERN_ERR "%s: Cannot allocate private data", __FUNCTION__);
return -ENOMEM;
}
/* Fill slow UCC structure */
uccs->us_info = us_info;
+ /* Set the PHY base address */
+ uccs->us_regs = ioremap(us_info->regs, sizeof(struct ucc_slow));
+ if (uccs->us_regs == NULL) {
+ printk(KERN_ERR "%s: Cannot map UCC registers", __FUNCTION__);
+ return -ENOMEM;
+ }
+
uccs->saved_uccm = 0;
uccs->p_rx_frame = 0;
- uccs->us_regs = us_info->regs;
us_regs = uccs->us_regs;
uccs->p_ucce = (u16 *) & (us_regs->ucce);
uccs->p_uccm = (u16 *) & (us_regs->uccm);
@@ -190,24 +173,22 @@
#endif /* STATISTICS */
/* Get PRAM base */
- uccs->us_pram_offset = qe_muram_alloc(UCC_SLOW_PRAM_SIZE,
- ALIGNMENT_OF_UCC_SLOW_PRAM);
+ uccs->us_pram_offset =
+ qe_muram_alloc(UCC_SLOW_PRAM_SIZE, ALIGNMENT_OF_UCC_SLOW_PRAM);
if (IS_MURAM_ERR(uccs->us_pram_offset)) {
- uccs_err
- ("ucc_slow_init: Can not allocate MURAM memory "
- "for Slow UCC.");
+ printk(KERN_ERR "%s: cannot allocate MURAM for PRAM", __FUNCTION__);
ucc_slow_free(uccs);
return -ENOMEM;
}
id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
qe_issue_cmd(QE_ASSIGN_PAGE_TO_DEVICE, id, QE_CR_PROTOCOL_UNSPECIFIED,
- (u32) uccs->us_pram_offset);
+ uccs->us_pram_offset);
uccs->us_pram = qe_muram_addr(uccs->us_pram_offset);
/* Init Guemr register */
if ((ret = ucc_init_guemr((struct ucc_common *) (us_info->regs)))) {
- uccs_err("ucc_slow_init: Could not init the guemr register.");
+ printk(KERN_ERR "%s: cannot init GUEMR", __FUNCTION__);
ucc_slow_free(uccs);
return ret;
}
@@ -216,7 +197,7 @@
if ((ret = ucc_set_type(us_info->ucc_num,
(struct ucc_common *) (us_info->regs),
UCC_SPEED_TYPE_SLOW))) {
- uccs_err("ucc_slow_init: Could not init the guemr register.");
+ printk(KERN_ERR "%s: cannot set UCC type", __FUNCTION__);
ucc_slow_free(uccs);
return ret;
}
@@ -230,7 +211,7 @@
qe_muram_alloc(us_info->rx_bd_ring_len * sizeof(struct qe_bd),
QE_ALIGNMENT_OF_BD);
if (IS_MURAM_ERR(uccs->rx_base_offset)) {
- uccs_err("ucc_slow_init: No memory for Rx BD's.");
+ printk(KERN_ERR "%s: cannot allocate RX BDs", __FUNCTION__);
uccs->rx_base_offset = 0;
ucc_slow_free(uccs);
return -ENOMEM;
@@ -240,7 +221,7 @@
qe_muram_alloc(us_info->tx_bd_ring_len * sizeof(struct qe_bd),
QE_ALIGNMENT_OF_BD);
if (IS_MURAM_ERR(uccs->tx_base_offset)) {
- uccs_err("ucc_slow_init: No memory for Tx BD's.");
+ printk(KERN_ERR "%s: cannot allocate TX BDs", __FUNCTION__);
uccs->tx_base_offset = 0;
ucc_slow_free(uccs);
return -ENOMEM;
@@ -248,34 +229,33 @@
/* Init Tx bds */
bd = uccs->confBd = uccs->tx_bd = qe_muram_addr(uccs->tx_base_offset);
- for (i = 0; i < us_info->tx_bd_ring_len; i++) {
+ for (i = 0; i < us_info->tx_bd_ring_len - 1; i++) {
/* clear bd buffer */
- out_be32(&(((struct qe_bd *)bd)->buf), 0);
+ out_be32(&bd->buf, 0);
/* set bd status and length */
- out_be32((u32*)bd, 0);
- bd += sizeof(struct qe_bd);
+ out_be32((u32 *) bd, 0);
+ bd++;
}
- bd -= sizeof(struct qe_bd);
- /* set bd status and length */
- out_be32((u32*)bd, T_W); /* for last BD set Wrap bit */
+ /* for last BD set Wrap bit */
+ out_be32(&bd->buf, 0);
+ out_be32((u32 *) bd, cpu_to_be32(T_W));
/* Init Rx bds */
bd = uccs->rx_bd = qe_muram_addr(uccs->rx_base_offset);
- for (i = 0; i < us_info->rx_bd_ring_len; i++) {
+ for (i = 0; i < us_info->rx_bd_ring_len - 1; i++) {
/* set bd status and length */
out_be32((u32*)bd, 0);
/* clear bd buffer */
- out_be32(&(((struct qe_bd *)bd)->buf), 0);
- bd += sizeof(struct qe_bd);
+ out_be32(&bd->buf, 0);
+ bd++;
}
- bd -= sizeof(struct qe_bd);
- /* set bd status and length */
- out_be32((u32*)bd, R_W); /* for last BD set Wrap bit */
+ /* for last BD set Wrap bit */
+ out_be32((u32*)bd, cpu_to_be32(R_W));
+ out_be32(&bd->buf, 0);
/* Set GUMR (For more details see the hardware spec.). */
/* gumr_h */
- gumr = 0;
- gumr |= us_info->tcrc;
+ gumr = us_info->tcrc;
if (us_info->cdp)
gumr |= UCC_SLOW_GUMR_H_CDP;
if (us_info->ctsp)
@@ -295,7 +275,8 @@
out_be32(&us_regs->gumr_h, gumr);
/* gumr_l */
- gumr = 0;
+ gumr = us_info->tdcr | us_info->rdcr | us_info->tenc | us_info->renc |
+ us_info->diag | us_info->mode;
if (us_info->tci)
gumr |= UCC_SLOW_GUMR_L_TCI;
if (us_info->rinv)
@@ -304,23 +285,14 @@
gumr |= UCC_SLOW_GUMR_L_TINV;
if (us_info->tend)
gumr |= UCC_SLOW_GUMR_L_TEND;
- gumr |= us_info->tdcr;
- gumr |= us_info->rdcr;
- gumr |= us_info->tenc;
- gumr |= us_info->renc;
- gumr |= us_info->diag;
- gumr |= us_info->mode;
out_be32(&us_regs->gumr_l, gumr);
/* Function code registers */
- /* function_code has initial value 0 */
/* if the data is in cachable memory, the 'global' */
/* in the function code should be set. */
- function_code |= us_info->data_mem_part;
- function_code |= QE_BMR_BYTE_ORDER_BO_MOT; /* Required for QE */
- uccs->us_pram->tfcr = function_code;
- uccs->us_pram->rfcr = function_code;
+ uccs->us_pram->tfcr = uccs->us_pram->rfcr =
+ us_info->data_mem_part | QE_BMR_BYTE_ORDER_BO_MOT;
/* rbase, tbase are offsets from MURAM base */
out_be16(&uccs->us_pram->rbase, uccs->us_pram_offset);
@@ -336,34 +308,29 @@
/* If NMSI (not Tsa), set Tx and Rx clock. */
if (!us_info->tsa) {
/* Rx clock routing */
- if (ucc_set_qe_mux_rxtx
- (us_info->ucc_num, us_info->rx_clock, COMM_DIR_RX)) {
- uccs_err
- ("ucc_slow_init: Illegal value for parameter"
- " 'RxClock'.");
+ if (ucc_set_qe_mux_rxtx(us_info->ucc_num, us_info->rx_clock,
+ COMM_DIR_RX)) {
+ printk(KERN_ERR "%s: illegal value for RX clock",
+ __FUNCTION__);
ucc_slow_free(uccs);
return -EINVAL;
}
/* Tx clock routing */
- if (ucc_set_qe_mux_rxtx(us_info->ucc_num,
- us_info->tx_clock, COMM_DIR_TX)) {
- uccs_err
- ("ucc_slow_init: Illegal value for parameter "
- "'TxClock'.");
+ if (ucc_set_qe_mux_rxtx(us_info->ucc_num, us_info->tx_clock,
+ COMM_DIR_TX)) {
+ printk(KERN_ERR "%s: illegal value for TX clock",
+ __FUNCTION__);
ucc_slow_free(uccs);
return -EINVAL;
}
}
- /*
- * INTERRUPTS
- */
/* Set interrupt mask register at UCC level. */
out_be16(&us_regs->uccm, us_info->uccm_mask);
- /* First, clear anything pending at UCC level, */
- /* otherwise, old garbage may come through */
- /* as soon as the dam is opened. */
+ /* First, clear anything pending at UCC level,
+ * otherwise, old garbage may come through
+ * as soon as the dam is opened. */
/* Writing '1' clears */
out_be16(&us_regs->ucce, 0xffff);
@@ -400,3 +367,5 @@
kfree(uccs);
}
+
+
diff --git a/arch/x86_64/kernel/early-quirks.c b/arch/x86_64/kernel/early-quirks.c
index bd30d13..8047ea8 100644
--- a/arch/x86_64/kernel/early-quirks.c
+++ b/arch/x86_64/kernel/early-quirks.c
@@ -53,7 +53,9 @@
return;
nvidia_hpet_detected = 0;
- acpi_table_parse(ACPI_SIG_HPET, nvidia_hpet_check);
+ if (acpi_table_parse(ACPI_SIG_HPET, nvidia_hpet_check))
+ return;
+
if (nvidia_hpet_detected == 0) {
acpi_skip_timer_override = 1;
printk(KERN_INFO "Nvidia board "
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index 20eacc2..e942ffe 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -13,6 +13,7 @@
depends on IA64 || X86
depends on PCI
depends on PM
+ select PNP
default y
---help---
Advanced Configuration and Power Interface (ACPI) support for
@@ -132,15 +133,6 @@
Note that this is an ref. implementation only. It may or may not work
for your integrated video device.
-config ACPI_HOTKEY
- tristate "Generic Hotkey (EXPERIMENTAL)"
- depends on EXPERIMENTAL
- depends on X86
- default n
- help
- Experimental consolidated hotkey driver.
- If you are unsure, say N.
-
config ACPI_FAN
tristate "Fan"
default y
diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
index 856c32b..5956e9f 100644
--- a/drivers/acpi/Makefile
+++ b/drivers/acpi/Makefile
@@ -46,7 +46,6 @@
obj-$(CONFIG_ACPI_DOCK) += dock.o
obj-$(CONFIG_ACPI_BAY) += bay.o
obj-$(CONFIG_ACPI_VIDEO) += video.o
-obj-$(CONFIG_ACPI_HOTKEY) += hotkey.o
obj-y += pci_root.o pci_link.o pci_irq.o pci_bind.o
obj-$(CONFIG_ACPI_POWER) += power.o
obj-$(CONFIG_ACPI_PROCESSOR) += processor.o
diff --git a/drivers/acpi/ac.c b/drivers/acpi/ac.c
index 6daeace..37c7dc4 100644
--- a/drivers/acpi/ac.c
+++ b/drivers/acpi/ac.c
@@ -35,7 +35,6 @@
#define ACPI_AC_COMPONENT 0x00020000
#define ACPI_AC_CLASS "ac_adapter"
#define ACPI_AC_HID "ACPI0003"
-#define ACPI_AC_DRIVER_NAME "ACPI AC Adapter Driver"
#define ACPI_AC_DEVICE_NAME "AC Adapter"
#define ACPI_AC_FILE_STATE "state"
#define ACPI_AC_NOTIFY_STATUS 0x80
@@ -44,10 +43,10 @@
#define ACPI_AC_STATUS_UNKNOWN 0xFF
#define _COMPONENT ACPI_AC_COMPONENT
-ACPI_MODULE_NAME("acpi_ac")
+ACPI_MODULE_NAME("ac");
- MODULE_AUTHOR("Paul Diefenbaugh");
-MODULE_DESCRIPTION(ACPI_AC_DRIVER_NAME);
+MODULE_AUTHOR("Paul Diefenbaugh");
+MODULE_DESCRIPTION("ACPI AC Adapter Driver");
MODULE_LICENSE("GPL");
extern struct proc_dir_entry *acpi_lock_ac_dir(void);
@@ -58,7 +57,7 @@
static int acpi_ac_open_fs(struct inode *inode, struct file *file);
static struct acpi_driver acpi_ac_driver = {
- .name = ACPI_AC_DRIVER_NAME,
+ .name = "ac",
.class = ACPI_AC_CLASS,
.ids = ACPI_AC_HID,
.ops = {
diff --git a/drivers/acpi/acpi_memhotplug.c b/drivers/acpi/acpi_memhotplug.c
index cd946ed..c261726 100644
--- a/drivers/acpi/acpi_memhotplug.c
+++ b/drivers/acpi/acpi_memhotplug.c
@@ -35,14 +35,13 @@
#define ACPI_MEMORY_DEVICE_COMPONENT 0x08000000UL
#define ACPI_MEMORY_DEVICE_CLASS "memory"
#define ACPI_MEMORY_DEVICE_HID "PNP0C80"
-#define ACPI_MEMORY_DEVICE_DRIVER_NAME "Hotplug Mem Driver"
#define ACPI_MEMORY_DEVICE_NAME "Hotplug Mem Device"
#define _COMPONENT ACPI_MEMORY_DEVICE_COMPONENT
-ACPI_MODULE_NAME("acpi_memory")
- MODULE_AUTHOR("Naveen B S <naveen.b.s@intel.com>");
-MODULE_DESCRIPTION(ACPI_MEMORY_DEVICE_DRIVER_NAME);
+ACPI_MODULE_NAME("acpi_memhotplug");
+MODULE_AUTHOR("Naveen B S <naveen.b.s@intel.com>");
+MODULE_DESCRIPTION("Hotplug Mem Driver");
MODULE_LICENSE("GPL");
/* ACPI _STA method values */
@@ -60,7 +59,7 @@
static int acpi_memory_device_start(struct acpi_device *device);
static struct acpi_driver acpi_memory_device_driver = {
- .name = ACPI_MEMORY_DEVICE_DRIVER_NAME,
+ .name = "acpi_memhotplug",
.class = ACPI_MEMORY_DEVICE_CLASS,
.ids = ACPI_MEMORY_DEVICE_HID,
.ops = {
diff --git a/drivers/acpi/asus_acpi.c b/drivers/acpi/asus_acpi.c
index 31ad70a..772299f 100644
--- a/drivers/acpi/asus_acpi.c
+++ b/drivers/acpi/asus_acpi.c
@@ -141,6 +141,7 @@
W5A, //W5A
W3V, //W3030V
xxN, //M2400N, M3700N, M5200N, M6800N, S1300N, S5200N
+ A4S, //Z81sp
//(Centrino)
END_MODEL
} model; //Models currently supported
@@ -397,7 +398,16 @@
.brightness_set = "SPLV",
.brightness_get = "GPLV",
.display_set = "SDSP",
- .display_get = "\\ADVG"}
+ .display_get = "\\ADVG"},
+
+ {
+ .name = "A4S",
+ .brightness_set = "SPLV",
+ .brightness_get = "GPLV",
+ .mt_bt_switch = "BLED",
+ .mt_wled = "WLED"
+ }
+
};
/* procdir we use */
@@ -421,7 +431,7 @@
static int asus_hotk_add(struct acpi_device *device);
static int asus_hotk_remove(struct acpi_device *device, int type);
static struct acpi_driver asus_hotk_driver = {
- .name = ACPI_HOTK_NAME,
+ .name = "asus_acpi",
.class = ACPI_HOTK_CLASS,
.ids = ACPI_HOTK_HID,
.ops = {
@@ -1117,6 +1127,8 @@
return W3V;
else if (strncmp(model, "W5A", 3) == 0)
return W5A;
+ else if (strncmp(model, "A4S", 3) == 0)
+ return A4S;
else
return END_MODEL;
}
@@ -1365,10 +1377,6 @@
if (acpi_disabled)
return -ENODEV;
- if (!acpi_specific_hotkey_enabled) {
- printk(KERN_ERR "Using generic hotkey driver\n");
- return -ENODEV;
- }
asus_proc_dir = proc_mkdir(PROC_ASUS, acpi_root_dir);
if (!asus_proc_dir) {
printk(KERN_ERR "Asus ACPI: Unable to create /proc entry\n");
diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c
index 2f4521a..e64c76c 100644
--- a/drivers/acpi/battery.c
+++ b/drivers/acpi/battery.c
@@ -42,7 +42,6 @@
#define ACPI_BATTERY_COMPONENT 0x00040000
#define ACPI_BATTERY_CLASS "battery"
#define ACPI_BATTERY_HID "PNP0C0A"
-#define ACPI_BATTERY_DRIVER_NAME "ACPI Battery Driver"
#define ACPI_BATTERY_DEVICE_NAME "Battery"
#define ACPI_BATTERY_FILE_INFO "info"
#define ACPI_BATTERY_FILE_STATUS "state"
@@ -53,10 +52,10 @@
#define ACPI_BATTERY_UNITS_AMPS "mA"
#define _COMPONENT ACPI_BATTERY_COMPONENT
-ACPI_MODULE_NAME("acpi_battery")
+ACPI_MODULE_NAME("battery");
- MODULE_AUTHOR("Paul Diefenbaugh");
-MODULE_DESCRIPTION(ACPI_BATTERY_DRIVER_NAME);
+MODULE_AUTHOR("Paul Diefenbaugh");
+MODULE_DESCRIPTION("ACPI Battery Driver");
MODULE_LICENSE("GPL");
extern struct proc_dir_entry *acpi_lock_battery_dir(void);
@@ -67,7 +66,7 @@
static int acpi_battery_resume(struct acpi_device *device);
static struct acpi_driver acpi_battery_driver = {
- .name = ACPI_BATTERY_DRIVER_NAME,
+ .name = "battery",
.class = ACPI_BATTERY_CLASS,
.ids = ACPI_BATTERY_HID,
.ops = {
@@ -324,6 +323,13 @@
return result;
}
+static void acpi_battery_check_present(struct acpi_battery *battery)
+{
+ if (!battery->flags.present) {
+ acpi_battery_check(battery);
+ }
+}
+
/* --------------------------------------------------------------------------
FS Interface (/proc)
-------------------------------------------------------------------------- */
@@ -340,6 +346,8 @@
if (!battery)
goto end;
+ acpi_battery_check_present(battery);
+
if (battery->flags.present)
seq_printf(seq, "present: yes\n");
else {
@@ -424,6 +432,8 @@
if (!battery)
goto end;
+ acpi_battery_check_present(battery);
+
if (battery->flags.present)
seq_printf(seq, "present: yes\n");
else {
@@ -499,6 +509,8 @@
if (!battery)
goto end;
+ acpi_battery_check_present(battery);
+
if (!battery->flags.present) {
seq_printf(seq, "present: no\n");
goto end;
@@ -536,6 +548,8 @@
if (!battery || (count > sizeof(alarm_string) - 1))
return -EINVAL;
+ acpi_battery_check_present(battery);
+
if (!battery->flags.present)
return -ENODEV;
diff --git a/drivers/acpi/bay.c b/drivers/acpi/bay.c
index 91082ce..fb3f31b 100644
--- a/drivers/acpi/bay.c
+++ b/drivers/acpi/bay.c
@@ -32,11 +32,9 @@
#include <asm/uaccess.h>
#include <linux/platform_device.h>
-#define ACPI_BAY_DRIVER_NAME "ACPI Removable Drive Bay Driver"
-
-ACPI_MODULE_NAME("bay")
+ACPI_MODULE_NAME("bay");
MODULE_AUTHOR("Kristen Carlson Accardi");
-MODULE_DESCRIPTION(ACPI_BAY_DRIVER_NAME);
+MODULE_DESCRIPTION("ACPI Removable Drive Bay Driver");
MODULE_LICENSE("GPL");
#define ACPI_BAY_CLASS "bay"
#define ACPI_BAY_COMPONENT 0x10000000
@@ -47,18 +45,6 @@
acpi_get_name(h, ACPI_FULL_PATHNAME, &buffer);\
printk(KERN_DEBUG PREFIX "%s: %s\n", prefix, s); }
static void bay_notify(acpi_handle handle, u32 event, void *data);
-static int acpi_bay_add(struct acpi_device *device);
-static int acpi_bay_remove(struct acpi_device *device, int type);
-
-static struct acpi_driver acpi_bay_driver = {
- .name = ACPI_BAY_DRIVER_NAME,
- .class = ACPI_BAY_CLASS,
- .ids = ACPI_BAY_HID,
- .ops = {
- .add = acpi_bay_add,
- .remove = acpi_bay_remove,
- },
-};
struct bay {
acpi_handle handle;
@@ -234,14 +220,6 @@
}
EXPORT_SYMBOL_GPL(eject_removable_drive);
-static int acpi_bay_add(struct acpi_device *device)
-{
- bay_dprintk(device->handle, "adding bay device");
- strcpy(acpi_device_name(device), "Dockable Bay");
- strcpy(acpi_device_class(device), "bay");
- return 0;
-}
-
static int acpi_bay_add_fs(struct bay *bay)
{
int ret;
@@ -303,7 +281,7 @@
/* initialize platform device stuff */
pdev = platform_device_register_simple(ACPI_BAY_CLASS, id, NULL, 0);
- if (pdev == NULL) {
+ if (IS_ERR(pdev)) {
printk(KERN_ERR PREFIX "Error registering bay device\n");
goto bay_add_err;
}
@@ -339,52 +317,6 @@
return -ENODEV;
}
-static int acpi_bay_remove(struct acpi_device *device, int type)
-{
- /*** FIXME: do something here */
- return 0;
-}
-
-/**
- * bay_create_acpi_device - add new devices to acpi
- * @handle - handle of the device to add
- *
- * This function will create a new acpi_device for the given
- * handle if one does not exist already. This should cause
- * acpi to scan for drivers for the given devices, and call
- * matching driver's add routine.
- *
- * Returns a pointer to the acpi_device corresponding to the handle.
- */
-static struct acpi_device * bay_create_acpi_device(acpi_handle handle)
-{
- struct acpi_device *device = NULL;
- struct acpi_device *parent_device;
- acpi_handle parent;
- int ret;
-
- bay_dprintk(handle, "Trying to get device");
- if (acpi_bus_get_device(handle, &device)) {
- /*
- * no device created for this object,
- * so we should create one.
- */
- bay_dprintk(handle, "No device for handle");
- acpi_get_parent(handle, &parent);
- if (acpi_bus_get_device(parent, &parent_device))
- parent_device = NULL;
-
- ret = acpi_bus_add(&device, parent_device, handle,
- ACPI_BUS_TYPE_DEVICE);
- if (ret) {
- pr_debug("error adding bus, %x\n",
- -ret);
- return NULL;
- }
- }
- return device;
-}
-
/**
* bay_notify - act upon an acpi bay notification
* @handle: the bay handle
@@ -394,38 +326,19 @@
*/
static void bay_notify(acpi_handle handle, u32 event, void *data)
{
- struct acpi_device *dev;
+ struct bay *bay_dev = (struct bay *)data;
+ struct device *dev = &bay_dev->pdev->dev;
bay_dprintk(handle, "Bay event");
switch(event) {
case ACPI_NOTIFY_BUS_CHECK:
- printk("Bus Check\n");
case ACPI_NOTIFY_DEVICE_CHECK:
- printk("Device Check\n");
- dev = bay_create_acpi_device(handle);
- if (dev)
- acpi_bus_generate_event(dev, event, 0);
- else
- printk("No device for generating event\n");
- /* wouldn't it be a good idea to just rescan SATA
- * right here?
- */
- break;
case ACPI_NOTIFY_EJECT_REQUEST:
- printk("Eject request\n");
- dev = bay_create_acpi_device(handle);
- if (dev)
- acpi_bus_generate_event(dev, event, 0);
- else
- printk("No device for generating eventn");
-
- /* wouldn't it be a good idea to just call the
- * eject_device here if we were a SATA device?
- */
+ kobject_uevent(&dev->kobj, KOBJ_CHANGE);
break;
default:
- printk("unknown event %d\n", event);
+ printk(KERN_ERR PREFIX "Bay: unknown event %d\n", event);
}
}
@@ -457,10 +370,6 @@
acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
ACPI_UINT32_MAX, find_bay, &bays, NULL);
- if (bays)
- if ((acpi_bus_register_driver(&acpi_bay_driver) < 0))
- printk(KERN_ERR "Unable to register bay driver\n");
-
if (!bays)
return -ENODEV;
@@ -481,8 +390,6 @@
kfree(bay->name);
kfree(bay);
}
-
- acpi_bus_unregister_driver(&acpi_bay_driver);
}
postcore_initcall(bay_init);
diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c
index c26468d..dd49ea0 100644
--- a/drivers/acpi/bus.c
+++ b/drivers/acpi/bus.c
@@ -39,7 +39,7 @@
#include <acpi/acpi_drivers.h>
#define _COMPONENT ACPI_BUS_COMPONENT
-ACPI_MODULE_NAME("acpi_bus")
+ACPI_MODULE_NAME("bus");
#ifdef CONFIG_X86
extern void __init acpi_pic_sci_set_trigger(unsigned int irq, u16 trigger);
#endif
@@ -147,7 +147,7 @@
*state = ACPI_STATE_D0;
} else {
/*
- * Get the device's power state either directly (via _PSC) or
+ * Get the device's power state either directly (via _PSC) or
* indirectly (via power resources).
*/
if (device->power.flags.explicit_get) {
@@ -199,15 +199,14 @@
* Get device's current power state if it's unknown
* This means device power state isn't initialized or previous setting failed
*/
- if (!device->flags.force_power_state) {
- if (device->power.state == ACPI_STATE_UNKNOWN)
- acpi_bus_get_power(device->handle, &device->power.state);
- if (state == device->power.state) {
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device is already at D%d\n",
- state));
- return 0;
- }
+ if ((device->power.state == ACPI_STATE_UNKNOWN) || device->flags.force_power_state)
+ acpi_bus_get_power(device->handle, &device->power.state);
+ if ((state == device->power.state) && !device->flags.force_power_state) {
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device is already at D%d\n",
+ state));
+ return 0;
}
+
if (!device->power.states[state].flags.valid) {
printk(KERN_WARNING PREFIX "Device does not support D%d\n", state);
return -ENODEV;
@@ -462,7 +461,7 @@
"Received BUS CHECK notification for device [%s]\n",
device->pnp.bus_id));
result = acpi_bus_check_scope(device);
- /*
+ /*
* TBD: We'll need to outsource certain events to non-ACPI
* drivers via the device manager (device.c).
*/
@@ -473,7 +472,7 @@
"Received DEVICE CHECK notification for device [%s]\n",
device->pnp.bus_id));
result = acpi_bus_check_device(device, NULL);
- /*
+ /*
* TBD: We'll need to outsource certain events to non-ACPI
* drivers via the device manager (device.c).
*/
@@ -543,7 +542,7 @@
char *message = NULL;
- /*
+ /*
* Let the system know what interrupt model we are using by
* evaluating the \_PIC object, if exists.
*/
@@ -684,7 +683,7 @@
* the EC device is found in the namespace (i.e. before acpi_initialize_objects()
* is called).
*
- * This is accomplished by looking for the ECDT table, and getting
+ * This is accomplished by looking for the ECDT table, and getting
* the EC parameters out of that.
*/
status = acpi_ec_ecdt_probe();
@@ -699,6 +698,9 @@
printk(KERN_INFO PREFIX "Interpreter enabled\n");
+ /* Initialize sleep structures */
+ acpi_sleep_init();
+
/*
* Get the system interrupt model and evaluate \_PIC.
*/
diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c
index c726612..cb4110b 100644
--- a/drivers/acpi/button.c
+++ b/drivers/acpi/button.c
@@ -34,7 +34,6 @@
#include <acpi/acpi_drivers.h>
#define ACPI_BUTTON_COMPONENT 0x00080000
-#define ACPI_BUTTON_DRIVER_NAME "ACPI Button Driver"
#define ACPI_BUTTON_CLASS "button"
#define ACPI_BUTTON_FILE_INFO "info"
#define ACPI_BUTTON_FILE_STATE "state"
@@ -61,10 +60,10 @@
#define ACPI_BUTTON_TYPE_LID 0x05
#define _COMPONENT ACPI_BUTTON_COMPONENT
-ACPI_MODULE_NAME("acpi_button")
+ACPI_MODULE_NAME("button");
MODULE_AUTHOR("Paul Diefenbaugh");
-MODULE_DESCRIPTION(ACPI_BUTTON_DRIVER_NAME);
+MODULE_DESCRIPTION("ACPI Button Driver");
MODULE_LICENSE("GPL");
static int acpi_button_add(struct acpi_device *device);
@@ -73,7 +72,7 @@
static int acpi_button_state_open_fs(struct inode *inode, struct file *file);
static struct acpi_driver acpi_button_driver = {
- .name = ACPI_BUTTON_DRIVER_NAME,
+ .name = "button",
.class = ACPI_BUTTON_CLASS,
.ids = "button_power,button_sleep,PNP0C0D,PNP0C0C,PNP0C0E",
.ops = {
diff --git a/drivers/acpi/cm_sbs.c b/drivers/acpi/cm_sbs.c
index 4a9b7bf..f9db4f4 100644
--- a/drivers/acpi/cm_sbs.c
+++ b/drivers/acpi/cm_sbs.c
@@ -31,7 +31,7 @@
#include <acpi/actypes.h>
#include <acpi/acutils.h>
-ACPI_MODULE_NAME("cm_sbs")
+ACPI_MODULE_NAME("cm_sbs");
#define ACPI_AC_CLASS "ac_adapter"
#define ACPI_BATTERY_CLASS "battery"
#define ACPI_SBS_COMPONENT 0x00080000
diff --git a/drivers/acpi/container.c b/drivers/acpi/container.c
index 69a68fd..0930d94 100644
--- a/drivers/acpi/container.c
+++ b/drivers/acpi/container.c
@@ -35,7 +35,6 @@
#include <acpi/acpi_drivers.h>
#include <acpi/container.h>
-#define ACPI_CONTAINER_DRIVER_NAME "ACPI container driver"
#define ACPI_CONTAINER_DEVICE_NAME "ACPI container device"
#define ACPI_CONTAINER_CLASS "container"
@@ -44,10 +43,10 @@
#define ACPI_CONTAINER_COMPONENT 0x01000000
#define _COMPONENT ACPI_CONTAINER_COMPONENT
-ACPI_MODULE_NAME("acpi_container")
+ACPI_MODULE_NAME("container");
- MODULE_AUTHOR("Anil S Keshavamurthy");
-MODULE_DESCRIPTION(ACPI_CONTAINER_DRIVER_NAME);
+MODULE_AUTHOR("Anil S Keshavamurthy");
+MODULE_DESCRIPTION("ACPI container driver");
MODULE_LICENSE("GPL");
#define ACPI_STA_PRESENT (0x00000001)
@@ -56,7 +55,7 @@
static int acpi_container_remove(struct acpi_device *device, int type);
static struct acpi_driver acpi_container_driver = {
- .name = ACPI_CONTAINER_DRIVER_NAME,
+ .name = "container",
.class = ACPI_CONTAINER_CLASS,
.ids = "ACPI0004,PNP0A05,PNP0A06",
.ops = {
diff --git a/drivers/acpi/debug.c b/drivers/acpi/debug.c
index d48f65a..bf513e0 100644
--- a/drivers/acpi/debug.c
+++ b/drivers/acpi/debug.c
@@ -12,7 +12,7 @@
#include <acpi/acglobal.h>
#define _COMPONENT ACPI_SYSTEM_COMPONENT
-ACPI_MODULE_NAME("debug")
+ACPI_MODULE_NAME("debug");
#ifdef MODULE_PARAM_PREFIX
#undef MODULE_PARAM_PREFIX
diff --git a/drivers/acpi/dispatcher/dsmethod.c b/drivers/acpi/dispatcher/dsmethod.c
index 1cbe619..1683e5c 100644
--- a/drivers/acpi/dispatcher/dsmethod.c
+++ b/drivers/acpi/dispatcher/dsmethod.c
@@ -231,10 +231,8 @@
* Obtain the method mutex if necessary. Do not acquire mutex for a
* recursive call.
*/
- if (!walk_state ||
- !obj_desc->method.mutex->mutex.owner_thread ||
- (walk_state->thread !=
- obj_desc->method.mutex->mutex.owner_thread)) {
+ if (acpi_os_get_thread_id() !=
+ obj_desc->method.mutex->mutex.owner_thread_id) {
/*
* Acquire the method mutex. This releases the interpreter if we
* block (and reacquires it before it returns)
@@ -248,14 +246,14 @@
}
/* Update the mutex and walk info and save the original sync_level */
+ obj_desc->method.mutex->mutex.owner_thread_id =
+ acpi_os_get_thread_id();
if (walk_state) {
obj_desc->method.mutex->mutex.
original_sync_level =
walk_state->thread->current_sync_level;
- obj_desc->method.mutex->mutex.owner_thread =
- walk_state->thread;
walk_state->thread->current_sync_level =
obj_desc->method.sync_level;
} else {
@@ -569,7 +567,7 @@
acpi_os_release_mutex(method_desc->method.mutex->mutex.
os_mutex);
- method_desc->method.mutex->mutex.owner_thread = NULL;
+ method_desc->method.mutex->mutex.owner_thread_id = ACPI_MUTEX_NOT_ACQUIRED;
}
}
diff --git a/drivers/acpi/dock.c b/drivers/acpi/dock.c
index 688e83a..54a697f 100644
--- a/drivers/acpi/dock.c
+++ b/drivers/acpi/dock.c
@@ -32,11 +32,11 @@
#include <acpi/acpi_bus.h>
#include <acpi/acpi_drivers.h>
-#define ACPI_DOCK_DRIVER_NAME "ACPI Dock Station Driver"
+#define ACPI_DOCK_DRIVER_DESCRIPTION "ACPI Dock Station Driver"
-ACPI_MODULE_NAME("dock")
+ACPI_MODULE_NAME("dock");
MODULE_AUTHOR("Kristen Carlson Accardi");
-MODULE_DESCRIPTION(ACPI_DOCK_DRIVER_NAME);
+MODULE_DESCRIPTION(ACPI_DOCK_DRIVER_DESCRIPTION);
MODULE_LICENSE("GPL");
static struct atomic_notifier_head dock_notifier_list;
@@ -741,7 +741,7 @@
goto dock_add_err;
}
- printk(KERN_INFO PREFIX "%s \n", ACPI_DOCK_DRIVER_NAME);
+ printk(KERN_INFO PREFIX "%s \n", ACPI_DOCK_DRIVER_DESCRIPTION);
return 0;
diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index 743ce27..ab68883 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -38,11 +38,10 @@
#include <acpi/actypes.h>
#define _COMPONENT ACPI_EC_COMPONENT
-ACPI_MODULE_NAME("acpi_ec")
+ACPI_MODULE_NAME("ec");
#define ACPI_EC_COMPONENT 0x00100000
#define ACPI_EC_CLASS "embedded_controller"
#define ACPI_EC_HID "PNP0C09"
-#define ACPI_EC_DRIVER_NAME "ACPI Embedded Controller Driver"
#define ACPI_EC_DEVICE_NAME "Embedded Controller"
#define ACPI_EC_FILE_INFO "info"
#undef PREFIX
@@ -80,7 +79,7 @@
static int acpi_ec_add(struct acpi_device *device);
static struct acpi_driver acpi_ec_driver = {
- .name = ACPI_EC_DRIVER_NAME,
+ .name = "ec",
.class = ACPI_EC_CLASS,
.ids = ACPI_EC_HID,
.ops = {
@@ -280,8 +279,10 @@
mutex_lock(&ec->lock);
if (ec->global_lock) {
status = acpi_acquire_global_lock(ACPI_EC_UDELAY_GLK, &glk);
- if (ACPI_FAILURE(status))
+ if (ACPI_FAILURE(status)) {
+ mutex_unlock(&ec->lock);
return -ENODEV;
+ }
}
/* Make sure GPE is enabled before doing transaction */
diff --git a/drivers/acpi/event.c b/drivers/acpi/event.c
index 959a893..3b23562 100644
--- a/drivers/acpi/event.c
+++ b/drivers/acpi/event.c
@@ -13,7 +13,7 @@
#include <acpi/acpi_drivers.h>
#define _COMPONENT ACPI_SYSTEM_COMPONENT
-ACPI_MODULE_NAME("event")
+ACPI_MODULE_NAME("event");
/* Global vars for handling event proc entry */
static DEFINE_SPINLOCK(acpi_system_event_lock);
diff --git a/drivers/acpi/events/evgpe.c b/drivers/acpi/events/evgpe.c
index dfac3ec..635ba44 100644
--- a/drivers/acpi/events/evgpe.c
+++ b/drivers/acpi/events/evgpe.c
@@ -636,17 +636,6 @@
}
}
- if (!acpi_gbl_system_awake_and_running) {
- /*
- * We just woke up because of a wake GPE. Disable any further GPEs
- * until we are fully up and running (Only wake GPEs should be enabled
- * at this time, but we just brute-force disable them all.)
- * 1) We must disable this particular wake GPE so it won't fire again
- * 2) We want to disable all wake GPEs, since we are now awake
- */
- (void)acpi_hw_disable_all_gpes();
- }
-
/*
* Dispatch the GPE to either an installed handler, or the control method
* associated with this GPE (_Lxx or _Exx). If a handler exists, we invoke
diff --git a/drivers/acpi/events/evmisc.c b/drivers/acpi/events/evmisc.c
index 1b784ffe..d572700 100644
--- a/drivers/acpi/events/evmisc.c
+++ b/drivers/acpi/events/evmisc.c
@@ -196,12 +196,11 @@
notify_info->notify.value = (u16) notify_value;
notify_info->notify.handler_obj = handler_obj;
- status =
- acpi_os_execute(OSL_NOTIFY_HANDLER, acpi_ev_notify_dispatch,
- notify_info);
- if (ACPI_FAILURE(status)) {
- acpi_ut_delete_generic_state(notify_info);
- }
+ acpi_ex_relinquish_interpreter();
+
+ acpi_ev_notify_dispatch(notify_info);
+
+ acpi_ex_reacquire_interpreter();
}
if (!handler_obj) {
diff --git a/drivers/acpi/executer/exdump.c b/drivers/acpi/executer/exdump.c
index 68d283f..1a73c14 100644
--- a/drivers/acpi/executer/exdump.c
+++ b/drivers/acpi/executer/exdump.c
@@ -134,7 +134,7 @@
static struct acpi_exdump_info acpi_ex_dump_mutex[5] = {
{ACPI_EXD_INIT, ACPI_EXD_TABLE_SIZE(acpi_ex_dump_mutex), NULL},
{ACPI_EXD_UINT8, ACPI_EXD_OFFSET(mutex.sync_level), "Sync Level"},
- {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(mutex.owner_thread), "Owner Thread"},
+ {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(mutex.owner_thread_id), "Owner Thread"},
{ACPI_EXD_UINT16, ACPI_EXD_OFFSET(mutex.acquisition_depth),
"Acquire Depth"},
{ACPI_EXD_POINTER, ACPI_EXD_OFFSET(mutex.os_mutex), "OsMutex"}
diff --git a/drivers/acpi/executer/exmutex.c b/drivers/acpi/executer/exmutex.c
index 5101bad..4eb883b 100644
--- a/drivers/acpi/executer/exmutex.c
+++ b/drivers/acpi/executer/exmutex.c
@@ -66,10 +66,9 @@
*
******************************************************************************/
-void acpi_ex_unlink_mutex(union acpi_operand_object *obj_desc)
+void acpi_ex_unlink_mutex(union acpi_operand_object *obj_desc,
+ struct acpi_thread_state *thread)
{
- struct acpi_thread_state *thread = obj_desc->mutex.owner_thread;
-
if (!thread) {
return;
}
@@ -174,16 +173,13 @@
/* Support for multiple acquires by the owning thread */
- if (obj_desc->mutex.owner_thread) {
- if (obj_desc->mutex.owner_thread->thread_id ==
- walk_state->thread->thread_id) {
- /*
- * The mutex is already owned by this thread, just increment the
- * acquisition depth
- */
- obj_desc->mutex.acquisition_depth++;
- return_ACPI_STATUS(AE_OK);
- }
+ if (obj_desc->mutex.owner_thread_id == acpi_os_get_thread_id()) {
+ /*
+ * The mutex is already owned by this thread, just increment the
+ * acquisition depth
+ */
+ obj_desc->mutex.acquisition_depth++;
+ return_ACPI_STATUS(AE_OK);
}
/* Acquire the mutex, wait if necessary. Special case for Global Lock */
@@ -206,7 +202,7 @@
/* Have the mutex: update mutex and walk info and save the sync_level */
- obj_desc->mutex.owner_thread = walk_state->thread;
+ obj_desc->mutex.owner_thread_id = acpi_os_get_thread_id();
obj_desc->mutex.acquisition_depth = 1;
obj_desc->mutex.original_sync_level =
walk_state->thread->current_sync_level;
@@ -246,7 +242,7 @@
/* The mutex must have been previously acquired in order to release it */
- if (!obj_desc->mutex.owner_thread) {
+ if (!obj_desc->mutex.owner_thread_id) {
ACPI_ERROR((AE_INFO,
"Cannot release Mutex [%4.4s], not acquired",
acpi_ut_get_node_name(obj_desc->mutex.node)));
@@ -266,14 +262,14 @@
* The Mutex is owned, but this thread must be the owner.
* Special case for Global Lock, any thread can release
*/
- if ((obj_desc->mutex.owner_thread->thread_id !=
+ if ((obj_desc->mutex.owner_thread_id !=
walk_state->thread->thread_id)
&& (obj_desc->mutex.os_mutex != acpi_gbl_global_lock_mutex)) {
ACPI_ERROR((AE_INFO,
"Thread %lX cannot release Mutex [%4.4s] acquired by thread %lX",
(unsigned long)walk_state->thread->thread_id,
acpi_ut_get_node_name(obj_desc->mutex.node),
- (unsigned long)obj_desc->mutex.owner_thread->thread_id));
+ (unsigned long)obj_desc->mutex.owner_thread_id));
return_ACPI_STATUS(AE_AML_NOT_OWNER);
}
@@ -300,7 +296,7 @@
/* Unlink the mutex from the owner's list */
- acpi_ex_unlink_mutex(obj_desc);
+ acpi_ex_unlink_mutex(obj_desc, walk_state->thread);
/* Release the mutex, special case for Global Lock */
@@ -312,7 +308,7 @@
/* Update the mutex and restore sync_level */
- obj_desc->mutex.owner_thread = NULL;
+ obj_desc->mutex.owner_thread_id = ACPI_MUTEX_NOT_ACQUIRED;
walk_state->thread->current_sync_level =
obj_desc->mutex.original_sync_level;
@@ -367,7 +363,7 @@
/* Mark mutex unowned */
- obj_desc->mutex.owner_thread = NULL;
+ obj_desc->mutex.owner_thread_id = ACPI_MUTEX_NOT_ACQUIRED;
/* Update Thread sync_level (Last mutex is the important one) */
diff --git a/drivers/acpi/fan.c b/drivers/acpi/fan.c
index af22fdf..ec655c5 100644
--- a/drivers/acpi/fan.c
+++ b/drivers/acpi/fan.c
@@ -36,14 +36,13 @@
#define ACPI_FAN_COMPONENT 0x00200000
#define ACPI_FAN_CLASS "fan"
-#define ACPI_FAN_DRIVER_NAME "ACPI Fan Driver"
#define ACPI_FAN_FILE_STATE "state"
#define _COMPONENT ACPI_FAN_COMPONENT
-ACPI_MODULE_NAME("acpi_fan")
+ACPI_MODULE_NAME("fan");
- MODULE_AUTHOR("Paul Diefenbaugh");
-MODULE_DESCRIPTION(ACPI_FAN_DRIVER_NAME);
+MODULE_AUTHOR("Paul Diefenbaugh");
+MODULE_DESCRIPTION("ACPI Fan Driver");
MODULE_LICENSE("GPL");
static int acpi_fan_add(struct acpi_device *device);
@@ -52,7 +51,7 @@
static int acpi_fan_resume(struct acpi_device *device);
static struct acpi_driver acpi_fan_driver = {
- .name = ACPI_FAN_DRIVER_NAME,
+ .name = "fan",
.class = ACPI_FAN_CLASS,
.ids = "PNP0C0B",
.ops = {
diff --git a/drivers/acpi/glue.c b/drivers/acpi/glue.c
index 7b6c9ff..4334c20 100644
--- a/drivers/acpi/glue.c
+++ b/drivers/acpi/glue.c
@@ -241,3 +241,65 @@
}
arch_initcall(init_acpi_device_notify);
+
+
+#if defined(CONFIG_RTC_DRV_CMOS) || defined(CONFIG_RTC_DRV_CMOS_MODULE)
+
+/* Every ACPI platform has a mc146818 compatible "cmos rtc". Here we find
+ * its device node and pass extra config data. This helps its driver use
+ * capabilities that the now-obsolete mc146818 didn't have, and informs it
+ * that this board's RTC is wakeup-capable (per ACPI spec).
+ */
+#include <linux/mc146818rtc.h>
+
+static struct cmos_rtc_board_info rtc_info;
+
+
+/* PNP devices are registered in a subsys_initcall();
+ * ACPI specifies the PNP IDs to use.
+ */
+#include <linux/pnp.h>
+
+static int __init pnp_match(struct device *dev, void *data)
+{
+ static const char *ids[] = { "PNP0b00", "PNP0b01", "PNP0b02", };
+ struct pnp_dev *pnp = to_pnp_dev(dev);
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(ids); i++) {
+ if (compare_pnp_id(pnp->id, ids[i]) != 0)
+ return 1;
+ }
+ return 0;
+}
+
+static struct device *__init get_rtc_dev(void)
+{
+ return bus_find_device(&pnp_bus_type, NULL, NULL, pnp_match);
+}
+
+static int __init acpi_rtc_init(void)
+{
+ struct device *dev = get_rtc_dev();
+
+ if (dev) {
+ rtc_info.rtc_day_alarm = acpi_gbl_FADT.day_alarm;
+ rtc_info.rtc_mon_alarm = acpi_gbl_FADT.month_alarm;
+ rtc_info.rtc_century = acpi_gbl_FADT.century;
+
+ /* NOTE: acpi_gbl_FADT->rtcs4 is NOT currently useful */
+
+ dev->platform_data = &rtc_info;
+
+ /* RTC always wakes from S1/S2/S3, and often S4/STD */
+ device_init_wakeup(dev, 1);
+
+ put_device(dev);
+ } else
+ pr_debug("ACPI: RTC unavailable?\n");
+ return 0;
+}
+/* do this between RTC subsys_initcall() and rtc_cmos driver_initcall() */
+fs_initcall(acpi_rtc_init);
+
+#endif
diff --git a/drivers/acpi/hardware/hwsleep.c b/drivers/acpi/hardware/hwsleep.c
index 57901ca..8fa9312 100644
--- a/drivers/acpi/hardware/hwsleep.c
+++ b/drivers/acpi/hardware/hwsleep.c
@@ -235,6 +235,14 @@
"While executing method _SST"));
}
+ /*
+ * 1) Disable/Clear all GPEs
+ */
+ status = acpi_hw_disable_all_gpes();
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+
return_ACPI_STATUS(AE_OK);
}
@@ -290,13 +298,8 @@
}
/*
- * 1) Disable/Clear all GPEs
* 2) Enable all wakeup GPEs
*/
- status = acpi_hw_disable_all_gpes();
- if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
- }
acpi_gbl_system_awake_and_running = FALSE;
status = acpi_hw_enable_all_wakeup_gpes();
diff --git a/drivers/acpi/hotkey.c b/drivers/acpi/hotkey.c
deleted file mode 100644
index 8edfb92..0000000
--- a/drivers/acpi/hotkey.c
+++ /dev/null
@@ -1,1042 +0,0 @@
-/*
- * hotkey.c - ACPI Hotkey Driver ($Revision: 0.2 $)
- *
- * Copyright (C) 2004 Luming Yu <luming.yu@intel.com>
- *
- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
- *
- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- */
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/proc_fs.h>
-#include <linux/sched.h>
-#include <linux/kmod.h>
-#include <linux/seq_file.h>
-#include <acpi/acpi_drivers.h>
-#include <acpi/acpi_bus.h>
-#include <asm/uaccess.h>
-
-#define HOTKEY_ACPI_VERSION "0.1"
-
-#define HOTKEY_PROC "hotkey"
-#define HOTKEY_EV_CONFIG "event_config"
-#define HOTKEY_PL_CONFIG "poll_config"
-#define HOTKEY_ACTION "action"
-#define HOTKEY_INFO "info"
-
-#define ACPI_HOTK_NAME "Generic Hotkey Driver"
-#define ACPI_HOTK_CLASS "Hotkey"
-#define ACPI_HOTK_DEVICE_NAME "Hotkey"
-#define ACPI_HOTK_HID "Unknown?"
-#define ACPI_HOTKEY_COMPONENT 0x20000000
-
-#define ACPI_HOTKEY_EVENT 0x1
-#define ACPI_HOTKEY_POLLING 0x2
-#define ACPI_UNDEFINED_EVENT 0xf
-
-#define RESULT_STR_LEN 80
-
-#define ACTION_METHOD 0
-#define POLL_METHOD 1
-
-#define IS_EVENT(e) ((e) <= 10000 && (e) >0)
-#define IS_POLL(e) ((e) > 10000)
-#define IS_OTHERS(e) ((e)<=0 || (e)>=20000)
-#define _COMPONENT ACPI_HOTKEY_COMPONENT
-ACPI_MODULE_NAME("acpi_hotkey")
-
- MODULE_AUTHOR("luming.yu@intel.com");
-MODULE_DESCRIPTION(ACPI_HOTK_NAME);
-MODULE_LICENSE("GPL");
-
-/* standardized internal hotkey number/event */
-enum {
- /* Video Extension event */
- HK_EVENT_CYCLE_OUTPUT_DEVICE = 0x80,
- HK_EVENT_OUTPUT_DEVICE_STATUS_CHANGE,
- HK_EVENT_CYCLE_DISPLAY_OUTPUT,
- HK_EVENT_NEXT_DISPLAY_OUTPUT,
- HK_EVENT_PREVIOUS_DISPLAY_OUTPUT,
- HK_EVENT_CYCLE_BRIGHTNESS,
- HK_EVENT_INCREASE_BRIGHTNESS,
- HK_EVENT_DECREASE_BRIGHTNESS,
- HK_EVENT_ZERO_BRIGHTNESS,
- HK_EVENT_DISPLAY_DEVICE_OFF,
-
- /* Snd Card event */
- HK_EVENT_VOLUME_MUTE,
- HK_EVENT_VOLUME_INCLREASE,
- HK_EVENT_VOLUME_DECREASE,
-
- /* running state control */
- HK_EVENT_ENTERRING_S3,
- HK_EVENT_ENTERRING_S4,
- HK_EVENT_ENTERRING_S5,
-};
-
-enum conf_entry_enum {
- bus_handle = 0,
- bus_method = 1,
- action_handle = 2,
- method = 3,
- LAST_CONF_ENTRY
-};
-
-/* procdir we use */
-static struct proc_dir_entry *hotkey_proc_dir;
-static struct proc_dir_entry *hotkey_config;
-static struct proc_dir_entry *hotkey_poll_config;
-static struct proc_dir_entry *hotkey_action;
-static struct proc_dir_entry *hotkey_info;
-
-/* linkage for all type of hotkey */
-struct acpi_hotkey_link {
- struct list_head entries;
- int hotkey_type; /* event or polling based hotkey */
- int hotkey_standard_num; /* standardized hotkey(event) number */
-};
-
-/* event based hotkey */
-struct acpi_event_hotkey {
- struct acpi_hotkey_link hotkey_link;
- int flag;
- acpi_handle bus_handle; /* bus to install notify handler */
- int external_hotkey_num; /* external hotkey/event number */
- acpi_handle action_handle; /* acpi handle attached aml action method */
- char *action_method; /* action method */
-};
-
-/*
- * There are two ways to poll status
- * 1. directy call read_xxx method, without any arguments passed in
- * 2. call write_xxx method, with arguments passed in, you need
- * the result is saved in acpi_polling_hotkey.poll_result.
- * anthoer read command through polling interface.
- *
- */
-
-/* polling based hotkey */
-struct acpi_polling_hotkey {
- struct acpi_hotkey_link hotkey_link;
- int flag;
- acpi_handle poll_handle; /* acpi handle attached polling method */
- char *poll_method; /* poll method */
- acpi_handle action_handle; /* acpi handle attached action method */
- char *action_method; /* action method */
- union acpi_object *poll_result; /* polling_result */
- struct proc_dir_entry *proc;
-};
-
-/* hotkey object union */
-union acpi_hotkey {
- struct list_head entries;
- struct acpi_hotkey_link link;
- struct acpi_event_hotkey event_hotkey;
- struct acpi_polling_hotkey poll_hotkey;
-};
-
-/* hotkey object list */
-struct acpi_hotkey_list {
- struct list_head *entries;
- int count;
-};
-
-static int auto_hotkey_add(struct acpi_device *device);
-static int auto_hotkey_remove(struct acpi_device *device, int type);
-
-static struct acpi_driver hotkey_driver = {
- .name = ACPI_HOTK_NAME,
- .class = ACPI_HOTK_CLASS,
- .ids = ACPI_HOTK_HID,
- .ops = {
- .add = auto_hotkey_add,
- .remove = auto_hotkey_remove,
- },
-};
-
-static void free_hotkey_device(union acpi_hotkey *key);
-static void free_hotkey_buffer(union acpi_hotkey *key);
-static void free_poll_hotkey_buffer(union acpi_hotkey *key);
-static int hotkey_open_config(struct inode *inode, struct file *file);
-static int hotkey_poll_open_config(struct inode *inode, struct file *file);
-static ssize_t hotkey_write_config(struct file *file,
- const char __user * buffer,
- size_t count, loff_t * data);
-static int hotkey_info_open_fs(struct inode *inode, struct file *file);
-static int hotkey_action_open_fs(struct inode *inode, struct file *file);
-static ssize_t hotkey_execute_aml_method(struct file *file,
- const char __user * buffer,
- size_t count, loff_t * data);
-static int hotkey_config_seq_show(struct seq_file *seq, void *offset);
-static int hotkey_poll_config_seq_show(struct seq_file *seq, void *offset);
-static int hotkey_polling_open_fs(struct inode *inode, struct file *file);
-static union acpi_hotkey *get_hotkey_by_event(struct
- acpi_hotkey_list
- *hotkey_list, int event);
-
-/* event based config */
-static const struct file_operations hotkey_config_fops = {
- .open = hotkey_open_config,
- .read = seq_read,
- .write = hotkey_write_config,
- .llseek = seq_lseek,
- .release = single_release,
-};
-
-/* polling based config */
-static const struct file_operations hotkey_poll_config_fops = {
- .open = hotkey_poll_open_config,
- .read = seq_read,
- .write = hotkey_write_config,
- .llseek = seq_lseek,
- .release = single_release,
-};
-
-/* hotkey driver info */
-static const struct file_operations hotkey_info_fops = {
- .open = hotkey_info_open_fs,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
-
-/* action */
-static const struct file_operations hotkey_action_fops = {
- .open = hotkey_action_open_fs,
- .read = seq_read,
- .write = hotkey_execute_aml_method,
- .llseek = seq_lseek,
- .release = single_release,
-};
-
-/* polling results */
-static const struct file_operations hotkey_polling_fops = {
- .open = hotkey_polling_open_fs,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
-
-struct acpi_hotkey_list global_hotkey_list; /* link all ev or pl hotkey */
-struct list_head hotkey_entries; /* head of the list of hotkey_list */
-
-static int hotkey_info_seq_show(struct seq_file *seq, void *offset)
-{
-
- seq_printf(seq, "Hotkey generic driver ver: %s\n", HOTKEY_ACPI_VERSION);
-
- return 0;
-}
-
-static int hotkey_info_open_fs(struct inode *inode, struct file *file)
-{
- return single_open(file, hotkey_info_seq_show, PDE(inode)->data);
-}
-
-static char *format_result(union acpi_object *object)
-{
- char *buf;
-
- buf = kzalloc(RESULT_STR_LEN, GFP_KERNEL);
- if (!buf)
- return NULL;
- /* Now, just support integer type */
- if (object->type == ACPI_TYPE_INTEGER)
- sprintf(buf, "%d\n", (u32) object->integer.value);
- return buf;
-}
-
-static int hotkey_polling_seq_show(struct seq_file *seq, void *offset)
-{
- struct acpi_polling_hotkey *poll_hotkey = seq->private;
- char *buf;
-
-
- if (poll_hotkey->poll_result) {
- buf = format_result(poll_hotkey->poll_result);
- if (buf)
- seq_printf(seq, "%s", buf);
- kfree(buf);
- }
- return 0;
-}
-
-static int hotkey_polling_open_fs(struct inode *inode, struct file *file)
-{
- return single_open(file, hotkey_polling_seq_show, PDE(inode)->data);
-}
-
-static int hotkey_action_open_fs(struct inode *inode, struct file *file)
-{
- return single_open(file, hotkey_info_seq_show, PDE(inode)->data);
-}
-
-/* Mapping external hotkey number to standardized hotkey event num */
-static int hotkey_get_internal_event(int event, struct acpi_hotkey_list *list)
-{
- struct list_head *entries;
- int val = -1;
-
-
- list_for_each(entries, list->entries) {
- union acpi_hotkey *key =
- container_of(entries, union acpi_hotkey, entries);
- if (key->link.hotkey_type == ACPI_HOTKEY_EVENT
- && key->event_hotkey.external_hotkey_num == event) {
- val = key->link.hotkey_standard_num;
- break;
- }
- }
-
- return val;
-}
-
-static void
-acpi_hotkey_notify_handler(acpi_handle handle, u32 event, void *data)
-{
- struct acpi_device *device = NULL;
- u32 internal_event;
-
-
- if (acpi_bus_get_device(handle, &device))
- return;
-
- internal_event = hotkey_get_internal_event(event, &global_hotkey_list);
- acpi_bus_generate_event(device, internal_event, 0);
-
- return;
-}
-
-/* Need to invent automatically hotkey add method */
-static int auto_hotkey_add(struct acpi_device *device)
-{
- /* Implement me */
- return 0;
-}
-
-/* Need to invent automatically hotkey remove method */
-static int auto_hotkey_remove(struct acpi_device *device, int type)
-{
- /* Implement me */
- return 0;
-}
-
-/* Create a proc file for each polling method */
-static int create_polling_proc(union acpi_hotkey *device)
-{
- struct proc_dir_entry *proc;
- char proc_name[80];
- mode_t mode;
-
- mode = S_IFREG | S_IRUGO | S_IWUGO;
-
- sprintf(proc_name, "%d", device->link.hotkey_standard_num);
- /*
- strcat(proc_name, device->poll_hotkey.poll_method);
- */
- proc = create_proc_entry(proc_name, mode, hotkey_proc_dir);
-
- if (!proc) {
- return -ENODEV;
- } else {
- proc->proc_fops = &hotkey_polling_fops;
- proc->owner = THIS_MODULE;
- proc->data = device;
- proc->uid = 0;
- proc->gid = 0;
- device->poll_hotkey.proc = proc;
- }
- return 0;
-}
-
-static int hotkey_add(union acpi_hotkey *device)
-{
- int status = 0;
- struct acpi_device *dev = NULL;
-
-
- if (device->link.hotkey_type == ACPI_HOTKEY_EVENT) {
- acpi_bus_get_device(device->event_hotkey.bus_handle, &dev);
- status = acpi_install_notify_handler(dev->handle,
- ACPI_DEVICE_NOTIFY,
- acpi_hotkey_notify_handler,
- dev);
- } else /* Add polling hotkey */
- create_polling_proc(device);
-
- global_hotkey_list.count++;
-
- list_add_tail(&device->link.entries, global_hotkey_list.entries);
-
- return status;
-}
-
-static int hotkey_remove(union acpi_hotkey *device)
-{
- struct list_head *entries, *next;
-
-
- list_for_each_safe(entries, next, global_hotkey_list.entries) {
- union acpi_hotkey *key =
- container_of(entries, union acpi_hotkey, entries);
- if (key->link.hotkey_standard_num ==
- device->link.hotkey_standard_num) {
- list_del(&key->link.entries);
- free_hotkey_device(key);
- global_hotkey_list.count--;
- break;
- }
- }
- kfree(device);
- return 0;
-}
-
-static int hotkey_update(union acpi_hotkey *key)
-{
- struct list_head *entries;
-
-
- list_for_each(entries, global_hotkey_list.entries) {
- union acpi_hotkey *tmp =
- container_of(entries, union acpi_hotkey, entries);
- if (tmp->link.hotkey_standard_num ==
- key->link.hotkey_standard_num) {
- if (key->link.hotkey_type == ACPI_HOTKEY_EVENT) {
- free_hotkey_buffer(tmp);
- tmp->event_hotkey.bus_handle =
- key->event_hotkey.bus_handle;
- tmp->event_hotkey.external_hotkey_num =
- key->event_hotkey.external_hotkey_num;
- tmp->event_hotkey.action_handle =
- key->event_hotkey.action_handle;
- tmp->event_hotkey.action_method =
- key->event_hotkey.action_method;
- kfree(key);
- } else {
- /*
- char proc_name[80];
-
- sprintf(proc_name, "%d", tmp->link.hotkey_standard_num);
- strcat(proc_name, tmp->poll_hotkey.poll_method);
- remove_proc_entry(proc_name,hotkey_proc_dir);
- */
- free_poll_hotkey_buffer(tmp);
- tmp->poll_hotkey.poll_handle =
- key->poll_hotkey.poll_handle;
- tmp->poll_hotkey.poll_method =
- key->poll_hotkey.poll_method;
- tmp->poll_hotkey.action_handle =
- key->poll_hotkey.action_handle;
- tmp->poll_hotkey.action_method =
- key->poll_hotkey.action_method;
- tmp->poll_hotkey.poll_result =
- key->poll_hotkey.poll_result;
- /*
- create_polling_proc(tmp);
- */
- kfree(key);
- }
- return 0;
- break;
- }
- }
-
- return -ENODEV;
-}
-
-static void free_hotkey_device(union acpi_hotkey *key)
-{
- struct acpi_device *dev;
-
-
- if (key->link.hotkey_type == ACPI_HOTKEY_EVENT) {
- acpi_bus_get_device(key->event_hotkey.bus_handle, &dev);
- if (dev->handle)
- acpi_remove_notify_handler(dev->handle,
- ACPI_DEVICE_NOTIFY,
- acpi_hotkey_notify_handler);
- free_hotkey_buffer(key);
- } else {
- char proc_name[80];
-
- sprintf(proc_name, "%d", key->link.hotkey_standard_num);
- /*
- strcat(proc_name, key->poll_hotkey.poll_method);
- */
- remove_proc_entry(proc_name, hotkey_proc_dir);
- free_poll_hotkey_buffer(key);
- }
- kfree(key);
- return;
-}
-
-static void free_hotkey_buffer(union acpi_hotkey *key)
-{
- /* key would never be null, action method could be */
- kfree(key->event_hotkey.action_method);
-}
-
-static void free_poll_hotkey_buffer(union acpi_hotkey *key)
-{
- /* key would never be null, others could be*/
- kfree(key->poll_hotkey.action_method);
- kfree(key->poll_hotkey.poll_method);
- kfree(key->poll_hotkey.poll_result);
-}
-static int
-init_hotkey_device(union acpi_hotkey *key, char **config_entry,
- int std_num, int external_num)
-{
- acpi_handle tmp_handle;
- acpi_status status = AE_OK;
-
- if (std_num < 0 || IS_POLL(std_num) || !key)
- goto do_fail;
-
- if (!config_entry[bus_handle] || !config_entry[action_handle]
- || !config_entry[method])
- goto do_fail;
-
- key->link.hotkey_type = ACPI_HOTKEY_EVENT;
- key->link.hotkey_standard_num = std_num;
- key->event_hotkey.flag = 0;
- key->event_hotkey.action_method = config_entry[method];
-
- status = acpi_get_handle(NULL, config_entry[bus_handle],
- &(key->event_hotkey.bus_handle));
- if (ACPI_FAILURE(status))
- goto do_fail_zero;
- key->event_hotkey.external_hotkey_num = external_num;
- status = acpi_get_handle(NULL, config_entry[action_handle],
- &(key->event_hotkey.action_handle));
- if (ACPI_FAILURE(status))
- goto do_fail_zero;
- status = acpi_get_handle(key->event_hotkey.action_handle,
- config_entry[method], &tmp_handle);
- if (ACPI_FAILURE(status))
- goto do_fail_zero;
- return AE_OK;
-do_fail_zero:
- key->event_hotkey.action_method = NULL;
-do_fail:
- return -ENODEV;
-}
-
-static int
-init_poll_hotkey_device(union acpi_hotkey *key, char **config_entry,
- int std_num)
-{
- acpi_status status = AE_OK;
- acpi_handle tmp_handle;
-
- if (std_num < 0 || IS_EVENT(std_num) || !key)
- goto do_fail;
- if (!config_entry[bus_handle] ||!config_entry[bus_method] ||
- !config_entry[action_handle] || !config_entry[method])
- goto do_fail;
-
- key->link.hotkey_type = ACPI_HOTKEY_POLLING;
- key->link.hotkey_standard_num = std_num;
- key->poll_hotkey.flag = 0;
- key->poll_hotkey.poll_method = config_entry[bus_method];
- key->poll_hotkey.action_method = config_entry[method];
-
- status = acpi_get_handle(NULL, config_entry[bus_handle],
- &(key->poll_hotkey.poll_handle));
- if (ACPI_FAILURE(status))
- goto do_fail_zero;
- status = acpi_get_handle(key->poll_hotkey.poll_handle,
- config_entry[bus_method], &tmp_handle);
- if (ACPI_FAILURE(status))
- goto do_fail_zero;
- status =
- acpi_get_handle(NULL, config_entry[action_handle],
- &(key->poll_hotkey.action_handle));
- if (ACPI_FAILURE(status))
- goto do_fail_zero;
- status = acpi_get_handle(key->poll_hotkey.action_handle,
- config_entry[method], &tmp_handle);
- if (ACPI_FAILURE(status))
- goto do_fail_zero;
- key->poll_hotkey.poll_result =
- kmalloc(sizeof(union acpi_object), GFP_KERNEL);
- if (!key->poll_hotkey.poll_result)
- goto do_fail_zero;
- return AE_OK;
-
-do_fail_zero:
- key->poll_hotkey.poll_method = NULL;
- key->poll_hotkey.action_method = NULL;
-do_fail:
- return -ENODEV;
-}
-
-static int hotkey_open_config(struct inode *inode, struct file *file)
-{
- return (single_open
- (file, hotkey_config_seq_show, PDE(inode)->data));
-}
-
-static int hotkey_poll_open_config(struct inode *inode, struct file *file)
-{
- return (single_open
- (file, hotkey_poll_config_seq_show, PDE(inode)->data));
-}
-
-static int hotkey_config_seq_show(struct seq_file *seq, void *offset)
-{
- struct acpi_hotkey_list *hotkey_list = &global_hotkey_list;
- struct list_head *entries;
- char bus_name[ACPI_PATHNAME_MAX] = { 0 };
- char action_name[ACPI_PATHNAME_MAX] = { 0 };
- struct acpi_buffer bus = { ACPI_PATHNAME_MAX, bus_name };
- struct acpi_buffer act = { ACPI_PATHNAME_MAX, action_name };
-
-
- list_for_each(entries, hotkey_list->entries) {
- union acpi_hotkey *key =
- container_of(entries, union acpi_hotkey, entries);
- if (key->link.hotkey_type == ACPI_HOTKEY_EVENT) {
- acpi_get_name(key->event_hotkey.bus_handle,
- ACPI_NAME_TYPE_MAX, &bus);
- acpi_get_name(key->event_hotkey.action_handle,
- ACPI_NAME_TYPE_MAX, &act);
- seq_printf(seq, "%s:%s:%s:%d:%d\n", bus_name,
- action_name,
- key->event_hotkey.action_method,
- key->link.hotkey_standard_num,
- key->event_hotkey.external_hotkey_num);
- }
- }
- seq_puts(seq, "\n");
- return 0;
-}
-
-static int hotkey_poll_config_seq_show(struct seq_file *seq, void *offset)
-{
- struct acpi_hotkey_list *hotkey_list = &global_hotkey_list;
- struct list_head *entries;
- char bus_name[ACPI_PATHNAME_MAX] = { 0 };
- char action_name[ACPI_PATHNAME_MAX] = { 0 };
- struct acpi_buffer bus = { ACPI_PATHNAME_MAX, bus_name };
- struct acpi_buffer act = { ACPI_PATHNAME_MAX, action_name };
-
-
- list_for_each(entries, hotkey_list->entries) {
- union acpi_hotkey *key =
- container_of(entries, union acpi_hotkey, entries);
- if (key->link.hotkey_type == ACPI_HOTKEY_POLLING) {
- acpi_get_name(key->poll_hotkey.poll_handle,
- ACPI_NAME_TYPE_MAX, &bus);
- acpi_get_name(key->poll_hotkey.action_handle,
- ACPI_NAME_TYPE_MAX, &act);
- seq_printf(seq, "%s:%s:%s:%s:%d\n", bus_name,
- key->poll_hotkey.poll_method,
- action_name,
- key->poll_hotkey.action_method,
- key->link.hotkey_standard_num);
- }
- }
- seq_puts(seq, "\n");
- return 0;
-}
-
-static int
-get_parms(char *config_record, int *cmd, char **config_entry,
- int *internal_event_num, int *external_event_num)
-{
-/* the format of *config_record =
- * "1:\d+:*" : "cmd:internal_event_num"
- * "\d+:\w+:\w+:\w+:\w+:\d+:\d+" :
- * "cmd:bus_handle:bus_method:action_handle:method:internal_event_num:external_event_num"
- */
- char *tmp, *tmp1, count;
- int i;
-
- sscanf(config_record, "%d", cmd);
- if (*cmd == 1) {
- if (sscanf(config_record, "%d:%d", cmd, internal_event_num) !=
- 2)
- goto do_fail;
- else
- return (6);
- }
- tmp = strchr(config_record, ':');
- if (!tmp)
- goto do_fail;
- tmp++;
- for (i = 0; i < LAST_CONF_ENTRY; i++) {
- tmp1 = strchr(tmp, ':');
- if (!tmp1) {
- goto do_fail;
- }
- count = tmp1 - tmp;
- config_entry[i] = kzalloc(count + 1, GFP_KERNEL);
- if (!config_entry[i])
- goto handle_failure;
- strncpy(config_entry[i], tmp, count);
- tmp = tmp1 + 1;
- }
- if (sscanf(tmp, "%d:%d", internal_event_num, external_event_num) <= 0)
- goto handle_failure;
- if (!IS_OTHERS(*internal_event_num)) {
- return 6;
- }
-handle_failure:
- while (i-- > 0)
- kfree(config_entry[i]);
-do_fail:
- return -1;
-}
-
-/* count is length for one input record */
-static ssize_t hotkey_write_config(struct file *file,
- const char __user * buffer,
- size_t count, loff_t * data)
-{
- char *config_record = NULL;
- char *config_entry[LAST_CONF_ENTRY];
- int cmd, internal_event_num, external_event_num;
- int ret = 0;
- union acpi_hotkey *key = kzalloc(sizeof(union acpi_hotkey), GFP_KERNEL);
-
- if (!key)
- return -ENOMEM;
-
- config_record = kzalloc(count + 1, GFP_KERNEL);
- if (!config_record) {
- kfree(key);
- return -ENOMEM;
- }
-
- if (copy_from_user(config_record, buffer, count)) {
- kfree(config_record);
- kfree(key);
- printk(KERN_ERR PREFIX "Invalid data\n");
- return -EINVAL;
- }
- ret = get_parms(config_record, &cmd, config_entry,
- &internal_event_num, &external_event_num);
- kfree(config_record);
- if (ret != 6) {
- printk(KERN_ERR PREFIX "Invalid data format ret=%d\n", ret);
- return -EINVAL;
- }
-
- if (cmd == 1) {
- union acpi_hotkey *tmp = NULL;
- tmp = get_hotkey_by_event(&global_hotkey_list,
- internal_event_num);
- if (!tmp)
- printk(KERN_ERR PREFIX "Invalid key\n");
- else
- memcpy(key, tmp, sizeof(union acpi_hotkey));
- goto cont_cmd;
- }
- if (IS_EVENT(internal_event_num)) {
- if (init_hotkey_device(key, config_entry,
- internal_event_num, external_event_num))
- goto init_hotkey_fail;
- } else {
- if (init_poll_hotkey_device(key, config_entry,
- internal_event_num))
- goto init_poll_hotkey_fail;
- }
-cont_cmd:
- switch (cmd) {
- case 0:
- if (get_hotkey_by_event(&global_hotkey_list,
- key->link.hotkey_standard_num))
- goto fail_out;
- else
- hotkey_add(key);
- break;
- case 1:
- hotkey_remove(key);
- break;
- case 2:
- /* key is kfree()ed if matched*/
- if (hotkey_update(key))
- goto fail_out;
- break;
- default:
- goto fail_out;
- break;
- }
- return count;
-
-init_poll_hotkey_fail: /* failed init_poll_hotkey_device */
- kfree(config_entry[bus_method]);
- config_entry[bus_method] = NULL;
-init_hotkey_fail: /* failed init_hotkey_device */
- kfree(config_entry[method]);
-fail_out:
- kfree(config_entry[bus_handle]);
- kfree(config_entry[action_handle]);
- /* No double free since elements =NULL for error cases */
- if (IS_EVENT(internal_event_num)) {
- if (config_entry[bus_method])
- kfree(config_entry[bus_method]);
- free_hotkey_buffer(key); /* frees [method] */
- } else
- free_poll_hotkey_buffer(key); /* frees [bus_method]+[method] */
- kfree(key);
- printk(KERN_ERR PREFIX "invalid key\n");
- return -EINVAL;
-}
-
-/*
- * This function evaluates an ACPI method, given an int as parameter, the
- * method is searched within the scope of the handle, can be NULL. The output
- * of the method is written is output, which can also be NULL
- *
- * returns 1 if write is successful, 0 else.
- */
-static int write_acpi_int(acpi_handle handle, const char *method, int val,
- struct acpi_buffer *output)
-{
- struct acpi_object_list params; /* list of input parameters (an int here) */
- union acpi_object in_obj; /* the only param we use */
- acpi_status status;
-
- params.count = 1;
- params.pointer = &in_obj;
- in_obj.type = ACPI_TYPE_INTEGER;
- in_obj.integer.value = val;
-
- status = acpi_evaluate_object(handle, (char *)method, ¶ms, output);
-
- return (status == AE_OK);
-}
-
-static int read_acpi_int(acpi_handle handle, const char *method,
- union acpi_object *val)
-{
- struct acpi_buffer output;
- union acpi_object out_obj;
- acpi_status status;
-
- output.length = sizeof(out_obj);
- output.pointer = &out_obj;
-
- status = acpi_evaluate_object(handle, (char *)method, NULL, &output);
- if (val) {
- val->integer.value = out_obj.integer.value;
- val->type = out_obj.type;
- } else
- printk(KERN_ERR PREFIX "null val pointer\n");
- return ((status == AE_OK)
- && (out_obj.type == ACPI_TYPE_INTEGER));
-}
-
-static union acpi_hotkey *get_hotkey_by_event(struct
- acpi_hotkey_list
- *hotkey_list, int event)
-{
- struct list_head *entries;
-
- list_for_each(entries, hotkey_list->entries) {
- union acpi_hotkey *key =
- container_of(entries, union acpi_hotkey, entries);
- if (key->link.hotkey_standard_num == event) {
- return (key);
- }
- }
- return (NULL);
-}
-
-/*
- * user call AML method interface:
- * Call convention:
- * echo "event_num: arg type : value"
- * example: echo "1:1:30" > /proc/acpi/action
- * Just support 1 integer arg passing to AML method
- */
-
-static ssize_t hotkey_execute_aml_method(struct file *file,
- const char __user * buffer,
- size_t count, loff_t * data)
-{
- struct acpi_hotkey_list *hotkey_list = &global_hotkey_list;
- char *arg;
- int event, method_type, type, value;
- union acpi_hotkey *key;
-
-
- arg = kzalloc(count + 1, GFP_KERNEL);
- if (!arg)
- return -ENOMEM;
-
- if (copy_from_user(arg, buffer, count)) {
- kfree(arg);
- printk(KERN_ERR PREFIX "Invalid argument 2\n");
- return -EINVAL;
- }
-
- if (sscanf(arg, "%d:%d:%d:%d", &event, &method_type, &type, &value) !=
- 4) {
- kfree(arg);
- printk(KERN_ERR PREFIX "Invalid argument 3\n");
- return -EINVAL;
- }
- kfree(arg);
- if (type == ACPI_TYPE_INTEGER) {
- key = get_hotkey_by_event(hotkey_list, event);
- if (!key)
- goto do_fail;
- if (IS_EVENT(event))
- write_acpi_int(key->event_hotkey.action_handle,
- key->event_hotkey.action_method, value,
- NULL);
- else if (IS_POLL(event)) {
- if (method_type == POLL_METHOD)
- read_acpi_int(key->poll_hotkey.poll_handle,
- key->poll_hotkey.poll_method,
- key->poll_hotkey.poll_result);
- else if (method_type == ACTION_METHOD)
- write_acpi_int(key->poll_hotkey.action_handle,
- key->poll_hotkey.action_method,
- value, NULL);
- else
- goto do_fail;
-
- }
- } else {
- printk(KERN_WARNING "Not supported\n");
- return -EINVAL;
- }
- return count;
- do_fail:
- return -EINVAL;
-
-}
-
-static int __init hotkey_init(void)
-{
- int result;
- mode_t mode = S_IFREG | S_IRUGO | S_IWUGO;
-
-
- if (acpi_disabled)
- return -ENODEV;
-
- if (acpi_specific_hotkey_enabled) {
- printk("Using specific hotkey driver\n");
- return -ENODEV;
- }
-
- hotkey_proc_dir = proc_mkdir(HOTKEY_PROC, acpi_root_dir);
- if (!hotkey_proc_dir) {
- return (-ENODEV);
- }
- hotkey_proc_dir->owner = THIS_MODULE;
-
- hotkey_config =
- create_proc_entry(HOTKEY_EV_CONFIG, mode, hotkey_proc_dir);
- if (!hotkey_config) {
- goto do_fail1;
- } else {
- hotkey_config->proc_fops = &hotkey_config_fops;
- hotkey_config->data = &global_hotkey_list;
- hotkey_config->owner = THIS_MODULE;
- hotkey_config->uid = 0;
- hotkey_config->gid = 0;
- }
-
- hotkey_poll_config =
- create_proc_entry(HOTKEY_PL_CONFIG, mode, hotkey_proc_dir);
- if (!hotkey_poll_config) {
- goto do_fail2;
- } else {
- hotkey_poll_config->proc_fops = &hotkey_poll_config_fops;
- hotkey_poll_config->data = &global_hotkey_list;
- hotkey_poll_config->owner = THIS_MODULE;
- hotkey_poll_config->uid = 0;
- hotkey_poll_config->gid = 0;
- }
-
- hotkey_action = create_proc_entry(HOTKEY_ACTION, mode, hotkey_proc_dir);
- if (!hotkey_action) {
- goto do_fail3;
- } else {
- hotkey_action->proc_fops = &hotkey_action_fops;
- hotkey_action->owner = THIS_MODULE;
- hotkey_action->uid = 0;
- hotkey_action->gid = 0;
- }
-
- hotkey_info = create_proc_entry(HOTKEY_INFO, mode, hotkey_proc_dir);
- if (!hotkey_info) {
- goto do_fail4;
- } else {
- hotkey_info->proc_fops = &hotkey_info_fops;
- hotkey_info->owner = THIS_MODULE;
- hotkey_info->uid = 0;
- hotkey_info->gid = 0;
- }
-
- result = acpi_bus_register_driver(&hotkey_driver);
- if (result < 0)
- goto do_fail5;
- global_hotkey_list.count = 0;
- global_hotkey_list.entries = &hotkey_entries;
-
- INIT_LIST_HEAD(&hotkey_entries);
-
- return (0);
-
- do_fail5:
- remove_proc_entry(HOTKEY_INFO, hotkey_proc_dir);
- do_fail4:
- remove_proc_entry(HOTKEY_ACTION, hotkey_proc_dir);
- do_fail3:
- remove_proc_entry(HOTKEY_PL_CONFIG, hotkey_proc_dir);
- do_fail2:
- remove_proc_entry(HOTKEY_EV_CONFIG, hotkey_proc_dir);
- do_fail1:
- remove_proc_entry(HOTKEY_PROC, acpi_root_dir);
- return (-ENODEV);
-}
-
-static void __exit hotkey_exit(void)
-{
- struct list_head *entries, *next;
-
-
- list_for_each_safe(entries, next, global_hotkey_list.entries) {
- union acpi_hotkey *key =
- container_of(entries, union acpi_hotkey, entries);
-
- acpi_os_wait_events_complete(NULL);
- list_del(&key->link.entries);
- global_hotkey_list.count--;
- free_hotkey_device(key);
- }
- acpi_bus_unregister_driver(&hotkey_driver);
- remove_proc_entry(HOTKEY_EV_CONFIG, hotkey_proc_dir);
- remove_proc_entry(HOTKEY_PL_CONFIG, hotkey_proc_dir);
- remove_proc_entry(HOTKEY_ACTION, hotkey_proc_dir);
- remove_proc_entry(HOTKEY_INFO, hotkey_proc_dir);
- remove_proc_entry(HOTKEY_PROC, acpi_root_dir);
- return;
-}
-
-module_init(hotkey_init);
-module_exit(hotkey_exit);
diff --git a/drivers/acpi/i2c_ec.c b/drivers/acpi/i2c_ec.c
index 76ec8b6..acab4a4 100644
--- a/drivers/acpi/i2c_ec.c
+++ b/drivers/acpi/i2c_ec.c
@@ -27,18 +27,17 @@
#define ACPI_EC_HC_COMPONENT 0x00080000
#define ACPI_EC_HC_CLASS "ec_hc_smbus"
#define ACPI_EC_HC_HID "ACPI0001"
-#define ACPI_EC_HC_DRIVER_NAME "ACPI EC HC smbus driver"
#define ACPI_EC_HC_DEVICE_NAME "EC HC smbus"
#define _COMPONENT ACPI_EC_HC_COMPONENT
-ACPI_MODULE_NAME("acpi_smbus")
+ACPI_MODULE_NAME("i2c_ec");
static int acpi_ec_hc_add(struct acpi_device *device);
static int acpi_ec_hc_remove(struct acpi_device *device, int type);
static struct acpi_driver acpi_ec_hc_driver = {
- .name = ACPI_EC_HC_DRIVER_NAME,
+ .name = "i2c_ec",
.class = ACPI_EC_HC_CLASS,
.ids = ACPI_EC_HC_HID,
.ops = {
diff --git a/drivers/acpi/ibm_acpi.c b/drivers/acpi/ibm_acpi.c
index c6144ca..1a0ed3d 100644
--- a/drivers/acpi/ibm_acpi.c
+++ b/drivers/acpi/ibm_acpi.c
@@ -496,6 +496,10 @@
printk(IBM_INFO "%s v%s\n", IBM_DESC, IBM_VERSION);
printk(IBM_INFO "%s\n", IBM_URL);
+ if (ibm_thinkpad_ec_found)
+ printk(IBM_INFO "ThinkPad EC firmware %s\n",
+ ibm_thinkpad_ec_found);
+
return 0;
}
@@ -2617,7 +2621,7 @@
ibm_handle_init(#object, &object##_handle, *object##_parent, \
object##_paths, ARRAY_SIZE(object##_paths), &object##_path)
-static int set_ibm_param(const char *val, struct kernel_param *kp)
+static int __init set_ibm_param(const char *val, struct kernel_param *kp)
{
unsigned int i;
@@ -2659,7 +2663,8 @@
for (i = ARRAY_SIZE(ibms) - 1; i >= 0; i--)
ibm_exit(&ibms[i]);
- remove_proc_entry(IBM_DIR, acpi_root_dir);
+ if (proc_dir)
+ remove_proc_entry(IBM_DIR, acpi_root_dir);
if (ibm_thinkpad_ec_found)
kfree(ibm_thinkpad_ec_found);
@@ -2696,11 +2701,6 @@
if (acpi_disabled)
return -ENODEV;
- if (!acpi_specific_hotkey_enabled) {
- printk(IBM_ERR "using generic hotkey driver\n");
- return -ENODEV;
- }
-
/* ec is required because many other handles are relative to it */
IBM_HANDLE_INIT(ec);
if (!ec_handle) {
@@ -2710,9 +2710,6 @@
/* Models with newer firmware report the EC in DMI */
ibm_thinkpad_ec_found = check_dmi_for_ec();
- if (ibm_thinkpad_ec_found)
- printk(IBM_INFO "ThinkPad EC firmware %s\n",
- ibm_thinkpad_ec_found);
/* these handles are not required */
IBM_HANDLE_INIT(vid);
@@ -2742,6 +2739,7 @@
proc_dir = proc_mkdir(IBM_DIR, acpi_root_dir);
if (!proc_dir) {
printk(IBM_ERR "unable to create proc dir %s", IBM_DIR);
+ acpi_ibm_exit();
return -ENODEV;
}
proc_dir->owner = THIS_MODULE;
diff --git a/drivers/acpi/numa.c b/drivers/acpi/numa.c
index 4a9faff..8fcd6a1 100644
--- a/drivers/acpi/numa.c
+++ b/drivers/acpi/numa.c
@@ -33,7 +33,7 @@
#define ACPI_NUMA 0x80000000
#define _COMPONENT ACPI_NUMA
-ACPI_MODULE_NAME("numa")
+ACPI_MODULE_NAME("numa");
static nodemask_t nodes_found_map = NODE_MASK_NONE;
#define PXM_INVAL -1
@@ -45,12 +45,6 @@
int __cpuinitdata node_to_pxm_map[MAX_NUMNODES]
= { [0 ... MAX_NUMNODES - 1] = PXM_INVAL };
-extern int __init acpi_table_parse_madt_family(char *id,
- unsigned long madt_size,
- int entry_id,
- acpi_madt_entry_handler handler,
- unsigned int max_entries);
-
int __cpuinit pxm_to_node(int pxm)
{
if (pxm < 0)
@@ -208,9 +202,9 @@
int __init
acpi_table_parse_srat(enum acpi_srat_type id,
- acpi_madt_entry_handler handler, unsigned int max_entries)
+ acpi_table_entry_handler handler, unsigned int max_entries)
{
- return acpi_table_parse_madt_family(ACPI_SIG_SRAT,
+ return acpi_table_parse_entries(ACPI_SIG_SRAT,
sizeof(struct acpi_table_srat), id,
handler, max_entries);
}
@@ -220,9 +214,7 @@
int result;
/* SRAT: Static Resource Affinity Table */
- result = acpi_table_parse(ACPI_SIG_SRAT, acpi_parse_srat);
-
- if (result > 0) {
+ if (!acpi_table_parse(ACPI_SIG_SRAT, acpi_parse_srat)) {
result = acpi_table_parse_srat(ACPI_SRAT_TYPE_CPU_AFFINITY,
acpi_parse_processor_affinity,
NR_CPUS);
@@ -230,7 +222,7 @@
}
/* SLIT: System Locality Information Table */
- result = acpi_table_parse(ACPI_SIG_SLIT, acpi_parse_slit);
+ acpi_table_parse(ACPI_SIG_SLIT, acpi_parse_slit);
acpi_numa_arch_fixup();
return 0;
diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c
index 0f6f3bc..971eca4 100644
--- a/drivers/acpi/osl.c
+++ b/drivers/acpi/osl.c
@@ -46,7 +46,7 @@
#include <linux/efi.h>
#define _COMPONENT ACPI_OS_SERVICES
-ACPI_MODULE_NAME("osl")
+ACPI_MODULE_NAME("osl");
#define PREFIX "ACPI: "
struct acpi_os_dpc {
acpi_osd_exec_callback function;
@@ -68,9 +68,6 @@
extern char line_buf[80];
#endif /*ENABLE_DEBUGGER */
-int acpi_specific_hotkey_enabled = TRUE;
-EXPORT_SYMBOL(acpi_specific_hotkey_enabled);
-
static unsigned int acpi_irq_irq;
static acpi_osd_handler acpi_irq_handler;
static void *acpi_irq_context;
@@ -205,7 +202,7 @@
{
if (phys > ULONG_MAX) {
printk(KERN_ERR PREFIX "Cannot map memory that high\n");
- return 0;
+ return NULL;
}
if (acpi_gbl_permanent_mmap)
/*
@@ -890,26 +887,6 @@
}
#endif /* ACPI_FUTURE_USAGE */
-/* Assumes no unreadable holes inbetween */
-u8 acpi_os_readable(void *ptr, acpi_size len)
-{
-#if defined(__i386__) || defined(__x86_64__)
- char tmp;
- return !__get_user(tmp, (char __user *)ptr)
- && !__get_user(tmp, (char __user *)ptr + len - 1);
-#endif
- return 1;
-}
-
-#ifdef ACPI_FUTURE_USAGE
-u8 acpi_os_writable(void *ptr, acpi_size len)
-{
- /* could do dummy write (racy) or a kernel page table lookup.
- The later may be difficult at early boot when kmap doesn't work yet. */
- return 1;
-}
-#endif
-
acpi_status acpi_os_signal(u32 function, void *info)
{
switch (function) {
@@ -1012,14 +989,6 @@
__setup("acpi_wake_gpes_always_on", acpi_wake_gpes_always_on_setup);
-static int __init acpi_hotkey_setup(char *str)
-{
- acpi_specific_hotkey_enabled = FALSE;
- return 1;
-}
-
-__setup("acpi_generic_hotkey", acpi_hotkey_setup);
-
/*
* max_cstate is defined in the base kernel so modules can
* change it w/o depending on the state of the processor module.
diff --git a/drivers/acpi/pci_bind.c b/drivers/acpi/pci_bind.c
index 55f57a6..0289693 100644
--- a/drivers/acpi/pci_bind.c
+++ b/drivers/acpi/pci_bind.c
@@ -36,7 +36,7 @@
#include <acpi/acpi_drivers.h>
#define _COMPONENT ACPI_PCI_COMPONENT
-ACPI_MODULE_NAME("pci_bind")
+ACPI_MODULE_NAME("pci_bind");
struct acpi_pci_data {
struct acpi_pci_id id;
diff --git a/drivers/acpi/pci_irq.c b/drivers/acpi/pci_irq.c
index fe7d007..dd3186a 100644
--- a/drivers/acpi/pci_irq.c
+++ b/drivers/acpi/pci_irq.c
@@ -38,7 +38,7 @@
#include <acpi/acpi_drivers.h>
#define _COMPONENT ACPI_PCI_COMPONENT
-ACPI_MODULE_NAME("pci_irq")
+ACPI_MODULE_NAME("pci_irq");
static struct acpi_prt_list acpi_prt;
static DEFINE_SPINLOCK(acpi_prt_lock);
diff --git a/drivers/acpi/pci_link.c b/drivers/acpi/pci_link.c
index 0f683c8..acc5947 100644
--- a/drivers/acpi/pci_link.c
+++ b/drivers/acpi/pci_link.c
@@ -44,10 +44,9 @@
#include <acpi/acpi_drivers.h>
#define _COMPONENT ACPI_PCI_COMPONENT
-ACPI_MODULE_NAME("pci_link")
+ACPI_MODULE_NAME("pci_link");
#define ACPI_PCI_LINK_CLASS "pci_irq_routing"
#define ACPI_PCI_LINK_HID "PNP0C0F"
-#define ACPI_PCI_LINK_DRIVER_NAME "ACPI PCI Interrupt Link Driver"
#define ACPI_PCI_LINK_DEVICE_NAME "PCI Interrupt Link"
#define ACPI_PCI_LINK_FILE_INFO "info"
#define ACPI_PCI_LINK_FILE_STATUS "state"
@@ -56,7 +55,7 @@
static int acpi_pci_link_remove(struct acpi_device *device, int type);
static struct acpi_driver acpi_pci_link_driver = {
- .name = ACPI_PCI_LINK_DRIVER_NAME,
+ .name = "pci_link",
.class = ACPI_PCI_LINK_CLASS,
.ids = ACPI_PCI_LINK_HID,
.ops = {
diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c
index 4ecf701..ad4145a 100644
--- a/drivers/acpi/pci_root.c
+++ b/drivers/acpi/pci_root.c
@@ -36,17 +36,16 @@
#include <acpi/acpi_drivers.h>
#define _COMPONENT ACPI_PCI_COMPONENT
-ACPI_MODULE_NAME("pci_root")
+ACPI_MODULE_NAME("pci_root");
#define ACPI_PCI_ROOT_CLASS "pci_bridge"
#define ACPI_PCI_ROOT_HID "PNP0A03"
-#define ACPI_PCI_ROOT_DRIVER_NAME "ACPI PCI Root Bridge Driver"
#define ACPI_PCI_ROOT_DEVICE_NAME "PCI Root Bridge"
static int acpi_pci_root_add(struct acpi_device *device);
static int acpi_pci_root_remove(struct acpi_device *device, int type);
static int acpi_pci_root_start(struct acpi_device *device);
static struct acpi_driver acpi_pci_root_driver = {
- .name = ACPI_PCI_ROOT_DRIVER_NAME,
+ .name = "pci_root",
.class = ACPI_PCI_ROOT_CLASS,
.ids = ACPI_PCI_ROOT_HID,
.ops = {
diff --git a/drivers/acpi/power.c b/drivers/acpi/power.c
index 0ba7dfb..1ef3385 100644
--- a/drivers/acpi/power.c
+++ b/drivers/acpi/power.c
@@ -45,10 +45,9 @@
#include <acpi/acpi_drivers.h>
#define _COMPONENT ACPI_POWER_COMPONENT
-ACPI_MODULE_NAME("acpi_power")
+ACPI_MODULE_NAME("power");
#define ACPI_POWER_COMPONENT 0x00800000
#define ACPI_POWER_CLASS "power_resource"
-#define ACPI_POWER_DRIVER_NAME "ACPI Power Resource Driver"
#define ACPI_POWER_DEVICE_NAME "Power Resource"
#define ACPI_POWER_FILE_INFO "info"
#define ACPI_POWER_FILE_STATUS "state"
@@ -57,25 +56,33 @@
#define ACPI_POWER_RESOURCE_STATE_UNKNOWN 0xFF
static int acpi_power_add(struct acpi_device *device);
static int acpi_power_remove(struct acpi_device *device, int type);
+static int acpi_power_resume(struct acpi_device *device);
static int acpi_power_open_fs(struct inode *inode, struct file *file);
static struct acpi_driver acpi_power_driver = {
- .name = ACPI_POWER_DRIVER_NAME,
+ .name = "power",
.class = ACPI_POWER_CLASS,
.ids = ACPI_POWER_HID,
.ops = {
.add = acpi_power_add,
.remove = acpi_power_remove,
+ .resume = acpi_power_resume,
},
};
+struct acpi_power_reference {
+ struct list_head node;
+ struct acpi_device *device;
+};
+
struct acpi_power_resource {
struct acpi_device * device;
acpi_bus_id name;
u32 system_level;
u32 order;
int state;
- int references;
+ struct mutex resource_lock;
+ struct list_head reference;
};
static struct list_head acpi_power_resource_list;
@@ -171,22 +178,47 @@
return result;
}
-static int acpi_power_on(acpi_handle handle)
+static int acpi_power_on(acpi_handle handle, struct acpi_device *dev)
{
int result = 0;
+ int found = 0;
acpi_status status = AE_OK;
- struct acpi_device *device = NULL;
struct acpi_power_resource *resource = NULL;
+ struct list_head *node, *next;
+ struct acpi_power_reference *ref;
result = acpi_power_get_context(handle, &resource);
if (result)
return result;
- resource->references++;
+ mutex_lock(&resource->resource_lock);
+ list_for_each_safe(node, next, &resource->reference) {
+ ref = container_of(node, struct acpi_power_reference, node);
+ if (dev->handle == ref->device->handle) {
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device [%s] already referenced by resource [%s]\n",
+ dev->pnp.bus_id, resource->name));
+ found = 1;
+ break;
+ }
+ }
- if ((resource->references > 1)
- || (resource->state == ACPI_POWER_RESOURCE_STATE_ON)) {
+ if (!found) {
+ ref = kmalloc(sizeof (struct acpi_power_reference),
+ irqs_disabled() ? GFP_ATOMIC : GFP_KERNEL);
+ if (!ref) {
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO, "kmalloc() failed\n"));
+ mutex_unlock(&resource->resource_lock);
+ return -ENOMEM;
+ }
+ list_add_tail(&ref->node, &resource->reference);
+ ref->device = dev;
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device [%s] added to resource [%s] references\n",
+ dev->pnp.bus_id, resource->name));
+ }
+ mutex_unlock(&resource->resource_lock);
+
+ if (resource->state == ACPI_POWER_RESOURCE_STATE_ON) {
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Resource [%s] already on\n",
resource->name));
return 0;
@@ -203,38 +235,49 @@
return -ENOEXEC;
/* Update the power resource's _device_ power state */
- device = resource->device;
resource->device->power.state = ACPI_STATE_D0;
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Resource [%s] turned on\n",
resource->name));
-
return 0;
}
-static int acpi_power_off_device(acpi_handle handle)
+static int acpi_power_off_device(acpi_handle handle, struct acpi_device *dev)
{
int result = 0;
acpi_status status = AE_OK;
struct acpi_power_resource *resource = NULL;
+ struct list_head *node, *next;
+ struct acpi_power_reference *ref;
+
result = acpi_power_get_context(handle, &resource);
if (result)
return result;
- if (resource->references)
- resource->references--;
+ mutex_lock(&resource->resource_lock);
+ list_for_each_safe(node, next, &resource->reference) {
+ ref = container_of(node, struct acpi_power_reference, node);
+ if (dev->handle == ref->device->handle) {
+ list_del(&ref->node);
+ kfree(ref);
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device [%s] removed from resource [%s] references\n",
+ dev->pnp.bus_id, resource->name));
+ break;
+ }
+ }
- if (resource->references) {
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Resource [%s] is still in use, dereferencing\n",
- resource->device->pnp.bus_id));
+ if (!list_empty(&resource->reference)) {
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Cannot turn resource [%s] off - resource is in use\n",
+ resource->name));
+ mutex_unlock(&resource->resource_lock);
return 0;
}
+ mutex_unlock(&resource->resource_lock);
if (resource->state == ACPI_POWER_RESOURCE_STATE_OFF) {
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Resource [%s] already off\n",
- resource->device->pnp.bus_id));
+ resource->name));
return 0;
}
@@ -276,7 +319,7 @@
arg.integer.value = 1;
/* Open power resource */
for (i = 0; i < dev->wakeup.resources.count; i++) {
- ret = acpi_power_on(dev->wakeup.resources.handles[i]);
+ ret = acpi_power_on(dev->wakeup.resources.handles[i], dev);
if (ret) {
printk(KERN_ERR PREFIX "Transition power state\n");
dev->wakeup.flags.valid = 0;
@@ -323,7 +366,7 @@
/* Close power resource */
for (i = 0; i < dev->wakeup.resources.count; i++) {
- ret = acpi_power_off_device(dev->wakeup.resources.handles[i]);
+ ret = acpi_power_off_device(dev->wakeup.resources.handles[i], dev);
if (ret) {
printk(KERN_ERR PREFIX "Transition power state\n");
dev->wakeup.flags.valid = 0;
@@ -407,16 +450,20 @@
* (e.g. so the device doesn't lose power while transitioning).
*/
for (i = 0; i < tl->count; i++) {
- result = acpi_power_on(tl->handles[i]);
+ result = acpi_power_on(tl->handles[i], device);
if (result)
goto end;
}
+ if (device->power.state == state) {
+ goto end;
+ }
+
/*
* Then we dereference all power resources used in the current list.
*/
for (i = 0; i < cl->count; i++) {
- result = acpi_power_off_device(cl->handles[i]);
+ result = acpi_power_off_device(cl->handles[i], device);
if (result)
goto end;
}
@@ -439,7 +486,11 @@
static int acpi_power_seq_show(struct seq_file *seq, void *offset)
{
+ int count = 0;
+ int result = 0;
struct acpi_power_resource *resource = NULL;
+ struct list_head *node, *next;
+ struct acpi_power_reference *ref;
resource = seq->private;
@@ -447,6 +498,10 @@
if (!resource)
goto end;
+ result = acpi_power_get_state(resource);
+ if (result)
+ goto end;
+
seq_puts(seq, "state: ");
switch (resource->state) {
case ACPI_POWER_RESOURCE_STATE_ON:
@@ -460,11 +515,18 @@
break;
}
+ mutex_lock(&resource->resource_lock);
+ list_for_each_safe(node, next, &resource->reference) {
+ ref = container_of(node, struct acpi_power_reference, node);
+ count++;
+ }
+ mutex_unlock(&resource->resource_lock);
+
seq_printf(seq, "system level: S%d\n"
"order: %d\n"
"reference count: %d\n",
resource->system_level,
- resource->order, resource->references);
+ resource->order, count);
end:
return 0;
@@ -537,6 +599,8 @@
return -ENOMEM;
resource->device = device;
+ mutex_init(&resource->resource_lock);
+ INIT_LIST_HEAD(&resource->reference);
strcpy(resource->name, device->pnp.bus_id);
strcpy(acpi_device_name(device), ACPI_POWER_DEVICE_NAME);
strcpy(acpi_device_class(device), ACPI_POWER_CLASS);
@@ -584,6 +648,7 @@
static int acpi_power_remove(struct acpi_device *device, int type)
{
struct acpi_power_resource *resource = NULL;
+ struct list_head *node, *next;
if (!device || !acpi_driver_data(device))
@@ -593,11 +658,54 @@
acpi_power_remove_fs(device);
+ mutex_lock(&resource->resource_lock);
+ list_for_each_safe(node, next, &resource->reference) {
+ struct acpi_power_reference *ref = container_of(node, struct acpi_power_reference, node);
+ list_del(&ref->node);
+ kfree(ref);
+ }
+ mutex_unlock(&resource->resource_lock);
+
kfree(resource);
return 0;
}
+static int acpi_power_resume(struct acpi_device *device)
+{
+ int result = 0;
+ struct acpi_power_resource *resource = NULL;
+ struct acpi_power_reference *ref;
+
+ if (!device || !acpi_driver_data(device))
+ return -EINVAL;
+
+ resource = (struct acpi_power_resource *)acpi_driver_data(device);
+
+ result = acpi_power_get_state(resource);
+ if (result)
+ return result;
+
+ mutex_lock(&resource->resource_lock);
+ if ((resource->state == ACPI_POWER_RESOURCE_STATE_ON) &&
+ list_empty(&resource->reference)) {
+ mutex_unlock(&resource->resource_lock);
+ result = acpi_power_off_device(device->handle, NULL);
+ return result;
+ }
+
+ if ((resource->state == ACPI_POWER_RESOURCE_STATE_OFF) &&
+ !list_empty(&resource->reference)) {
+ ref = container_of(resource->reference.next, struct acpi_power_reference, node);
+ mutex_unlock(&resource->resource_lock);
+ result = acpi_power_on(device->handle, ref->device);
+ return result;
+ }
+
+ mutex_unlock(&resource->resource_lock);
+ return 0;
+}
+
static int __init acpi_power_init(void)
{
int result = 0;
diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c
index 0079bc5..99d1516 100644
--- a/drivers/acpi/processor_core.c
+++ b/drivers/acpi/processor_core.c
@@ -60,7 +60,6 @@
#define ACPI_PROCESSOR_COMPONENT 0x01000000
#define ACPI_PROCESSOR_CLASS "processor"
-#define ACPI_PROCESSOR_DRIVER_NAME "ACPI Processor Driver"
#define ACPI_PROCESSOR_DEVICE_NAME "Processor"
#define ACPI_PROCESSOR_FILE_INFO "info"
#define ACPI_PROCESSOR_FILE_THROTTLING "throttling"
@@ -74,10 +73,10 @@
#define ACPI_STA_PRESENT 0x00000001
#define _COMPONENT ACPI_PROCESSOR_COMPONENT
-ACPI_MODULE_NAME("acpi_processor")
+ACPI_MODULE_NAME("processor_core");
- MODULE_AUTHOR("Paul Diefenbaugh");
-MODULE_DESCRIPTION(ACPI_PROCESSOR_DRIVER_NAME);
+MODULE_AUTHOR("Paul Diefenbaugh");
+MODULE_DESCRIPTION("ACPI Processor Driver");
MODULE_LICENSE("GPL");
static int acpi_processor_add(struct acpi_device *device);
@@ -89,7 +88,7 @@
static int acpi_processor_handle_eject(struct acpi_processor *pr);
static struct acpi_driver acpi_processor_driver = {
- .name = ACPI_PROCESSOR_DRIVER_NAME,
+ .name = "processor",
.class = ACPI_PROCESSOR_CLASS,
.ids = ACPI_PROCESSOR_HID,
.ops = {
@@ -404,7 +403,7 @@
if (lsapic->lapic_flags & ACPI_MADT_ENABLED) {
/* First check against id */
if (lsapic->processor_id == acpi_id) {
- *apic_id = lsapic->id;
+ *apic_id = (lsapic->id << 8) | lsapic->eid;
return 1;
/* Check against optional uid */
} else if (entry->length >= 16 &&
@@ -1005,7 +1004,7 @@
#ifdef CONFIG_SMP
if (ACPI_FAILURE(acpi_get_table(ACPI_SIG_MADT, 0,
(struct acpi_table_header **)&madt)))
- madt = 0;
+ madt = NULL;
#endif
acpi_processor_dir = proc_mkdir(ACPI_PROCESSOR_CLASS, acpi_root_dir);
diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index 8206fc1..6077300 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -51,6 +51,14 @@
#include <asm/apic.h>
#endif
+/*
+ * Include the apic definitions for x86 to have the APIC timer related defines
+ * available also for UP (on SMP it gets magically included via linux/smp.h).
+ */
+#ifdef CONFIG_X86
+#include <asm/apic.h>
+#endif
+
#include <asm/io.h>
#include <asm/uaccess.h>
@@ -59,9 +67,8 @@
#define ACPI_PROCESSOR_COMPONENT 0x01000000
#define ACPI_PROCESSOR_CLASS "processor"
-#define ACPI_PROCESSOR_DRIVER_NAME "ACPI Processor Driver"
#define _COMPONENT ACPI_PROCESSOR_COMPONENT
-ACPI_MODULE_NAME("acpi_processor")
+ACPI_MODULE_NAME("processor_idle");
#define ACPI_PROCESSOR_FILE_POWER "power"
#define US_TO_PM_TIMER_TICKS(t) ((t * (PM_TIMER_FREQUENCY/1000)) / 1000)
#define C2_OVERHEAD 4 /* 1us (3.579 ticks per us) */
diff --git a/drivers/acpi/processor_perflib.c b/drivers/acpi/processor_perflib.c
index 058f13c..2f2e796 100644
--- a/drivers/acpi/processor_perflib.c
+++ b/drivers/acpi/processor_perflib.c
@@ -44,10 +44,9 @@
#define ACPI_PROCESSOR_COMPONENT 0x01000000
#define ACPI_PROCESSOR_CLASS "processor"
-#define ACPI_PROCESSOR_DRIVER_NAME "ACPI Processor Driver"
#define ACPI_PROCESSOR_FILE_PERFORMANCE "performance"
#define _COMPONENT ACPI_PROCESSOR_COMPONENT
-ACPI_MODULE_NAME("acpi_processor")
+ACPI_MODULE_NAME("processor_perflib");
static DEFINE_MUTEX(performance_mutex);
diff --git a/drivers/acpi/processor_thermal.c b/drivers/acpi/processor_thermal.c
index 40fecd6..06e6f3f 100644
--- a/drivers/acpi/processor_thermal.c
+++ b/drivers/acpi/processor_thermal.c
@@ -41,9 +41,8 @@
#define ACPI_PROCESSOR_COMPONENT 0x01000000
#define ACPI_PROCESSOR_CLASS "processor"
-#define ACPI_PROCESSOR_DRIVER_NAME "ACPI Processor Driver"
#define _COMPONENT ACPI_PROCESSOR_COMPONENT
-ACPI_MODULE_NAME("acpi_processor")
+ACPI_MODULE_NAME("processor_thermal");
/* --------------------------------------------------------------------------
Limit Interface
diff --git a/drivers/acpi/processor_throttling.c b/drivers/acpi/processor_throttling.c
index 89dff36..b334860 100644
--- a/drivers/acpi/processor_throttling.c
+++ b/drivers/acpi/processor_throttling.c
@@ -41,9 +41,8 @@
#define ACPI_PROCESSOR_COMPONENT 0x01000000
#define ACPI_PROCESSOR_CLASS "processor"
-#define ACPI_PROCESSOR_DRIVER_NAME "ACPI Processor Driver"
#define _COMPONENT ACPI_PROCESSOR_COMPONENT
-ACPI_MODULE_NAME("acpi_processor")
+ACPI_MODULE_NAME("processor_throttling");
/* --------------------------------------------------------------------------
Throttling Control
diff --git a/drivers/acpi/sbs.c b/drivers/acpi/sbs.c
index f58fc74..59640d9 100644
--- a/drivers/acpi/sbs.c
+++ b/drivers/acpi/sbs.c
@@ -59,7 +59,6 @@
#define ACPI_AC_CLASS "ac_adapter"
#define ACPI_BATTERY_CLASS "battery"
#define ACPI_SBS_HID "ACPI0002"
-#define ACPI_SBS_DRIVER_NAME "ACPI Smart Battery System Driver"
#define ACPI_SBS_DEVICE_NAME "Smart Battery System"
#define ACPI_SBS_FILE_INFO "info"
#define ACPI_SBS_FILE_STATE "state"
@@ -78,7 +77,7 @@
#define MAX_SBS_BAT 4
#define MAX_SMBUS_ERR 1
-ACPI_MODULE_NAME("acpi_sbs");
+ACPI_MODULE_NAME("sbs");
MODULE_AUTHOR("Rich Townsend");
MODULE_DESCRIPTION("Smart Battery System ACPI interface driver");
@@ -110,7 +109,7 @@
static void acpi_sbs_update_queue(void *data);
static struct acpi_driver acpi_sbs_driver = {
- .name = ACPI_SBS_DRIVER_NAME,
+ .name = "sbs",
.class = ACPI_SBS_CLASS,
.ids = ACPI_SBS_HID,
.ops = {
@@ -1034,21 +1033,19 @@
} else {
seq_printf(seq, "capacity state: ok\n");
}
+
+ foo = (s16) battery->state.amperage * battery->info.ipscale;
+ if (battery->info.capacity_mode) {
+ foo = foo * battery->info.design_voltage / 1000;
+ }
if (battery->state.amperage < 0) {
seq_printf(seq, "charging state: discharging\n");
- foo = battery->state.remaining_capacity * cscale * 60 /
- (battery->state.average_time_to_empty == 0 ? 1 :
- battery->state.average_time_to_empty);
- seq_printf(seq, "present rate: %i%s\n",
- foo, battery->info.capacity_mode ? "0 mW" : " mA");
+ seq_printf(seq, "present rate: %d %s\n",
+ -foo, battery->info.capacity_mode ? "mW" : "mA");
} else if (battery->state.amperage > 0) {
seq_printf(seq, "charging state: charging\n");
- foo = (battery->info.full_charge_capacity -
- battery->state.remaining_capacity) * cscale * 60 /
- (battery->state.average_time_to_full == 0 ? 1 :
- battery->state.average_time_to_full);
- seq_printf(seq, "present rate: %i%s\n",
- foo, battery->info.capacity_mode ? "0 mW" : " mA");
+ seq_printf(seq, "present rate: %d %s\n",
+ foo, battery->info.capacity_mode ? "mW" : "mA");
} else {
seq_printf(seq, "charging state: charged\n");
seq_printf(seq, "present rate: 0 %s\n",
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index 64f26db..bb0e0da 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -11,13 +11,12 @@
#include <acpi/acinterp.h> /* for acpi_ex_eisa_id_to_string() */
#define _COMPONENT ACPI_BUS_COMPONENT
-ACPI_MODULE_NAME("scan")
+ACPI_MODULE_NAME("scan");
#define STRUCT_TO_INT(s) (*((int*)&s))
extern struct acpi_device *acpi_root;
#define ACPI_BUS_CLASS "system_bus"
#define ACPI_BUS_HID "ACPI_BUS"
-#define ACPI_BUS_DRIVER_NAME "ACPI Bus Driver"
#define ACPI_BUS_DEVICE_NAME "System Bus"
static LIST_HEAD(acpi_device_list);
diff --git a/drivers/acpi/sleep/main.c b/drivers/acpi/sleep/main.c
index 62ce87d..37a0930 100644
--- a/drivers/acpi/sleep/main.c
+++ b/drivers/acpi/sleep/main.c
@@ -200,7 +200,7 @@
{},
};
-static int __init acpi_sleep_init(void)
+int __init acpi_sleep_init(void)
{
int i = 0;
@@ -229,4 +229,3 @@
return 0;
}
-late_initcall(acpi_sleep_init);
diff --git a/drivers/acpi/system.c b/drivers/acpi/system.c
index 7147b0b..83a8d30 100644
--- a/drivers/acpi/system.c
+++ b/drivers/acpi/system.c
@@ -31,14 +31,13 @@
#include <acpi/acpi_drivers.h>
#define _COMPONENT ACPI_SYSTEM_COMPONENT
-ACPI_MODULE_NAME("acpi_system")
+ACPI_MODULE_NAME("system");
#ifdef MODULE_PARAM_PREFIX
#undef MODULE_PARAM_PREFIX
#endif
#define MODULE_PARAM_PREFIX "acpi."
#define ACPI_SYSTEM_CLASS "system"
-#define ACPI_SYSTEM_DRIVER_NAME "ACPI System Driver"
#define ACPI_SYSTEM_DEVICE_NAME "System"
#define ACPI_SYSTEM_FILE_INFO "info"
#define ACPI_SYSTEM_FILE_EVENT "event"
diff --git a/drivers/acpi/tables.c b/drivers/acpi/tables.c
index 45bd173..849e2c3 100644
--- a/drivers/acpi/tables.c
+++ b/drivers/acpi/tables.c
@@ -169,40 +169,40 @@
int __init
-acpi_table_parse_madt_family(char *id,
- unsigned long madt_size,
+acpi_table_parse_entries(char *id,
+ unsigned long table_size,
int entry_id,
- acpi_madt_entry_handler handler,
+ acpi_table_entry_handler handler,
unsigned int max_entries)
{
- struct acpi_table_header *madt = NULL;
+ struct acpi_table_header *table_header = NULL;
struct acpi_subtable_header *entry;
unsigned int count = 0;
- unsigned long madt_end;
+ unsigned long table_end;
if (!handler)
return -EINVAL;
- /* Locate the MADT (if exists). There should only be one. */
- acpi_get_table(id, 0, &madt);
+ /* Locate the table (if exists). There should only be one. */
+ acpi_get_table(id, 0, &table_header);
- if (!madt) {
+ if (!table_header) {
printk(KERN_WARNING PREFIX "%4.4s not present\n", id);
return -ENODEV;
}
- madt_end = (unsigned long)madt + madt->length;
+ table_end = (unsigned long)table_header + table_header->length;
/* Parse all entries looking for a match. */
entry = (struct acpi_subtable_header *)
- ((unsigned long)madt + madt_size);
+ ((unsigned long)table_header + table_size);
while (((unsigned long)entry) + sizeof(struct acpi_subtable_header) <
- madt_end) {
+ table_end) {
if (entry->type == entry_id
&& (!max_entries || count++ < max_entries))
- if (handler(entry, madt_end))
+ if (handler(entry, table_end))
return -EINVAL;
entry = (struct acpi_subtable_header *)
@@ -218,13 +218,22 @@
int __init
acpi_table_parse_madt(enum acpi_madt_type id,
- acpi_madt_entry_handler handler, unsigned int max_entries)
+ acpi_table_entry_handler handler, unsigned int max_entries)
{
- return acpi_table_parse_madt_family(ACPI_SIG_MADT,
+ return acpi_table_parse_entries(ACPI_SIG_MADT,
sizeof(struct acpi_table_madt), id,
handler, max_entries);
}
+/**
+ * acpi_table_parse - find table with @id, run @handler on it
+ *
+ * @id: table id to find
+ * @handler: handler to run
+ *
+ * Scan the ACPI System Descriptor Table (STD) for a table matching @id,
+ * run @handler on it. Return 0 if table found, return on if not.
+ */
int __init acpi_table_parse(char *id, acpi_table_handler handler)
{
struct acpi_table_header *table = NULL;
@@ -234,9 +243,9 @@
acpi_get_table(id, 0, &table);
if (table) {
handler(table);
- return 1;
- } else
return 0;
+ } else
+ return 1;
}
/*
diff --git a/drivers/acpi/tables/tbxface.c b/drivers/acpi/tables/tbxface.c
index 807978d..417ef5f 100644
--- a/drivers/acpi/tables/tbxface.c
+++ b/drivers/acpi/tables/tbxface.c
@@ -338,9 +338,9 @@
int i;
acpi_status status = AE_NOT_EXIST;
- ACPI_FUNCTION_TRACE(acpi_unload_table);
+ ACPI_FUNCTION_TRACE(acpi_unload_table_id);
- /* Find table from the requested type list */
+ /* Find table in the global table list */
for (i = 0; i < acpi_gbl_root_table_list.count; ++i) {
if (id != acpi_gbl_root_table_list.tables[i].owner_id) {
continue;
@@ -352,8 +352,9 @@
* simply a position within the hierarchy
*/
acpi_tb_delete_namespace_by_owner(i);
- acpi_tb_release_owner_id(i);
+ status = acpi_tb_release_owner_id(i);
acpi_tb_set_table_loaded_flag(i, FALSE);
+ break;
}
return_ACPI_STATUS(status);
}
@@ -408,7 +409,7 @@
}
if (!acpi_gbl_permanent_mmap) {
- acpi_gbl_root_table_list.tables[i].pointer = 0;
+ acpi_gbl_root_table_list.tables[i].pointer = NULL;
}
return (status);
diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c
index 986afd4..0ae8b93 100644
--- a/drivers/acpi/thermal.c
+++ b/drivers/acpi/thermal.c
@@ -47,7 +47,6 @@
#define ACPI_THERMAL_COMPONENT 0x04000000
#define ACPI_THERMAL_CLASS "thermal_zone"
-#define ACPI_THERMAL_DRIVER_NAME "ACPI Thermal Zone Driver"
#define ACPI_THERMAL_DEVICE_NAME "Thermal Zone"
#define ACPI_THERMAL_FILE_STATE "state"
#define ACPI_THERMAL_FILE_TEMPERATURE "temperature"
@@ -71,10 +70,10 @@
#define CELSIUS_TO_KELVIN(t) ((t+273)*10)
#define _COMPONENT ACPI_THERMAL_COMPONENT
-ACPI_MODULE_NAME("acpi_thermal")
+ACPI_MODULE_NAME("thermal");
MODULE_AUTHOR("Paul Diefenbaugh");
-MODULE_DESCRIPTION(ACPI_THERMAL_DRIVER_NAME);
+MODULE_DESCRIPTION("ACPI Thermal Zone Driver");
MODULE_LICENSE("GPL");
static int tzp;
@@ -99,7 +98,7 @@
size_t, loff_t *);
static struct acpi_driver acpi_thermal_driver = {
- .name = ACPI_THERMAL_DRIVER_NAME,
+ .name = "thermal",
.class = ACPI_THERMAL_CLASS,
.ids = ACPI_THERMAL_HID,
.ops = {
@@ -270,7 +269,7 @@
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Polling frequency set to %lu seconds\n",
- tz->polling_frequency));
+ tz->polling_frequency/10));
return 0;
}
@@ -1357,28 +1356,32 @@
static int acpi_thermal_resume(struct acpi_device *device)
{
struct acpi_thermal *tz = NULL;
- int i;
+ int i, j, power_state, result;
+
if (!device || !acpi_driver_data(device))
return -EINVAL;
tz = acpi_driver_data(device);
- acpi_thermal_get_temperature(tz);
-
for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) {
- if (tz->trips.active[i].flags.valid) {
- tz->temperature = tz->trips.active[i].temperature;
- tz->trips.active[i].flags.enabled = 0;
-
- acpi_thermal_active(tz);
-
- tz->state.active |= tz->trips.active[i].flags.enabled;
- tz->state.active_index = i;
+ if (!(&tz->trips.active[i]))
+ break;
+ if (!tz->trips.active[i].flags.valid)
+ break;
+ tz->trips.active[i].flags.enabled = 1;
+ for (j = 0; j < tz->trips.active[i].devices.count; j++) {
+ result = acpi_bus_get_power(tz->trips.active[i].devices.
+ handles[j], &power_state);
+ if (result || (power_state != ACPI_STATE_D0)) {
+ tz->trips.active[i].flags.enabled = 0;
+ break;
+ }
}
+ tz->state.active |= tz->trips.active[i].flags.enabled;
}
- acpi_thermal_check(tz);
+ acpi_thermal_check(tz);
return AE_OK;
}
diff --git a/drivers/acpi/toshiba_acpi.c b/drivers/acpi/toshiba_acpi.c
index d9b651f..faf8a52 100644
--- a/drivers/acpi/toshiba_acpi.c
+++ b/drivers/acpi/toshiba_acpi.c
@@ -125,7 +125,7 @@
union acpi_object in_objs[1];
acpi_status status;
- params.count = sizeof(in_objs) / sizeof(in_objs[0]);
+ params.count = ARRAY_SIZE(in_objs);
params.pointer = in_objs;
in_objs[0].type = ACPI_TYPE_INTEGER;
in_objs[0].integer.value = val;
@@ -561,10 +561,6 @@
if (acpi_disabled)
return -ENODEV;
- if (!acpi_specific_hotkey_enabled) {
- printk(MY_INFO "Using generic hotkey driver\n");
- return -ENODEV;
- }
/* simple device detection: look for HCI method */
if (is_valid_acpi_path(METHOD_HCI_1))
method_hci = METHOD_HCI_1;
diff --git a/drivers/acpi/utilities/utdelete.c b/drivers/acpi/utilities/utdelete.c
index f777ceb..673a0ca 100644
--- a/drivers/acpi/utilities/utdelete.c
+++ b/drivers/acpi/utilities/utdelete.c
@@ -170,7 +170,6 @@
acpi_os_delete_mutex(object->mutex.os_mutex);
acpi_gbl_global_lock_mutex = NULL;
} else {
- acpi_ex_unlink_mutex(object);
acpi_os_delete_mutex(object->mutex.os_mutex);
}
break;
diff --git a/drivers/acpi/utils.c b/drivers/acpi/utils.c
index 68a809f..34f1575 100644
--- a/drivers/acpi/utils.c
+++ b/drivers/acpi/utils.c
@@ -31,7 +31,7 @@
#include <acpi/acpi_drivers.h>
#define _COMPONENT ACPI_BUS_COMPONENT
-ACPI_MODULE_NAME("acpi_utils")
+ACPI_MODULE_NAME("utils");
/* --------------------------------------------------------------------------
Object Evaluation Helpers
diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index e0b97ad..bf525cc 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -40,7 +40,6 @@
#define ACPI_VIDEO_COMPONENT 0x08000000
#define ACPI_VIDEO_CLASS "video"
-#define ACPI_VIDEO_DRIVER_NAME "ACPI Video Driver"
#define ACPI_VIDEO_BUS_NAME "Video Bus"
#define ACPI_VIDEO_DEVICE_NAME "Video Device"
#define ACPI_VIDEO_NOTIFY_SWITCH 0x80
@@ -65,17 +64,17 @@
#define ACPI_VIDEO_DISPLAY_LCD 4
#define _COMPONENT ACPI_VIDEO_COMPONENT
-ACPI_MODULE_NAME("acpi_video")
+ACPI_MODULE_NAME("video");
- MODULE_AUTHOR("Bruno Ducrot");
-MODULE_DESCRIPTION(ACPI_VIDEO_DRIVER_NAME);
+MODULE_AUTHOR("Bruno Ducrot");
+MODULE_DESCRIPTION("ACPI Video Driver");
MODULE_LICENSE("GPL");
static int acpi_video_bus_add(struct acpi_device *device);
static int acpi_video_bus_remove(struct acpi_device *device, int type);
static struct acpi_driver acpi_video_bus = {
- .name = ACPI_VIDEO_DRIVER_NAME,
+ .name = "video",
.class = ACPI_VIDEO_CLASS,
.ids = ACPI_VIDEO_HID,
.ops = {
diff --git a/drivers/base/bus.c b/drivers/base/bus.c
index 472810f..253868e 100644
--- a/drivers/base/bus.c
+++ b/drivers/base/bus.c
@@ -324,27 +324,25 @@
return error;
}
-static int device_add_attrs(struct bus_type * bus, struct device * dev)
+static int device_add_attrs(struct bus_type *bus, struct device *dev)
{
int error = 0;
int i;
- if (bus->dev_attrs) {
- for (i = 0; attr_name(bus->dev_attrs[i]); i++) {
- error = device_create_file(dev,&bus->dev_attrs[i]);
- if (error)
- goto Err;
+ if (!bus->dev_attrs)
+ return 0;
+
+ for (i = 0; attr_name(bus->dev_attrs[i]); i++) {
+ error = device_create_file(dev,&bus->dev_attrs[i]);
+ if (error) {
+ while (--i >= 0)
+ device_remove_file(dev, &bus->dev_attrs[i]);
+ break;
}
}
- Done:
return error;
- Err:
- while (--i >= 0)
- device_remove_file(dev,&bus->dev_attrs[i]);
- goto Done;
}
-
static void device_remove_attrs(struct bus_type * bus, struct device * dev)
{
int i;
diff --git a/drivers/base/class.c b/drivers/base/class.c
index 96def1d..1417e5c 100644
--- a/drivers/base/class.c
+++ b/drivers/base/class.c
@@ -163,8 +163,7 @@
void class_unregister(struct class * cls)
{
pr_debug("device class '%s': unregistering\n", cls->name);
- if (cls->virtual_dir)
- kobject_unregister(cls->virtual_dir);
+ kobject_unregister(cls->virtual_dir);
remove_class_attrs(cls);
subsystem_unregister(&cls->subsys);
}
diff --git a/drivers/i2c/busses/i2c-iop3xx.c b/drivers/i2c/busses/i2c-iop3xx.c
index 20ee4f7..90e2d93 100644
--- a/drivers/i2c/busses/i2c-iop3xx.c
+++ b/drivers/i2c/busses/i2c-iop3xx.c
@@ -83,7 +83,7 @@
* Every time unit enable is asserted, GPOD needs to be cleared
* on IOP3XX to avoid data corruption on the bus.
*/
-#ifdef CONFIG_PLAT_IOP
+#if defined(CONFIG_ARCH_IOP32X) || defined(CONFIG_ARCH_IOP33X)
if (iop3xx_adap->id == 0) {
gpio_line_set(IOP3XX_GPIO_LINE(7), GPIO_LOW);
gpio_line_set(IOP3XX_GPIO_LINE(6), GPIO_LOW);
diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
index c3b1567..14e83d0 100644
--- a/drivers/i2c/busses/i2c-pxa.c
+++ b/drivers/i2c/busses/i2c-pxa.c
@@ -34,6 +34,7 @@
#include <asm/hardware.h>
#include <asm/irq.h>
+#include <asm/io.h>
#include <asm/arch/i2c.h>
#include <asm/arch/pxa-regs.h>
@@ -54,8 +55,21 @@
unsigned int irqlogidx;
u32 isrlog[32];
u32 icrlog[32];
+
+ void __iomem *reg_base;
+
+ unsigned long iobase;
+ unsigned long iosize;
+
+ int irq;
};
+#define _IBMR(i2c) ((i2c)->reg_base + 0)
+#define _IDBR(i2c) ((i2c)->reg_base + 8)
+#define _ICR(i2c) ((i2c)->reg_base + 0x10)
+#define _ISR(i2c) ((i2c)->reg_base + 0x18)
+#define _ISAR(i2c) ((i2c)->reg_base + 0x20)
+
/*
* I2C Slave mode address
*/
@@ -130,7 +144,8 @@
static void i2c_pxa_show_state(struct pxa_i2c *i2c, int lno, const char *fname)
{
- dev_dbg(&i2c->adap.dev, "state:%s:%d: ISR=%08x, ICR=%08x, IBMR=%02x\n", fname, lno, ISR, ICR, IBMR);
+ dev_dbg(&i2c->adap.dev, "state:%s:%d: ISR=%08x, ICR=%08x, IBMR=%02x\n", fname, lno,
+ readl(_ISR(i2c)), readl(_ICR(i2c)), readl(_IBMR(i2c)));
}
#define show_state(i2c) i2c_pxa_show_state(i2c, __LINE__, __FUNCTION__)
@@ -153,7 +168,7 @@
printk("i2c: msg_num: %d msg_idx: %d msg_ptr: %d\n",
i2c->msg_num, i2c->msg_idx, i2c->msg_ptr);
printk("i2c: ICR: %08x ISR: %08x\n"
- "i2c: log: ", ICR, ISR);
+ "i2c: log: ", readl(_ICR(i2c)), readl(_ISR(i2c)));
for (i = 0; i < i2c->irqlogidx; i++)
printk("[%08x:%08x] ", i2c->isrlog[i], i2c->icrlog[i]);
printk("\n");
@@ -161,7 +176,7 @@
static inline int i2c_pxa_is_slavemode(struct pxa_i2c *i2c)
{
- return !(ICR & ICR_SCLE);
+ return !(readl(_ICR(i2c)) & ICR_SCLE);
}
static void i2c_pxa_abort(struct pxa_i2c *i2c)
@@ -173,28 +188,29 @@
return;
}
- while (time_before(jiffies, timeout) && (IBMR & 0x1) == 0) {
- unsigned long icr = ICR;
+ while (time_before(jiffies, timeout) && (readl(_IBMR(i2c)) & 0x1) == 0) {
+ unsigned long icr = readl(_ICR(i2c));
icr &= ~ICR_START;
icr |= ICR_ACKNAK | ICR_STOP | ICR_TB;
- ICR = icr;
+ writel(icr, _ICR(i2c));
show_state(i2c);
msleep(1);
}
- ICR &= ~(ICR_MA | ICR_START | ICR_STOP);
+ writel(readl(_ICR(i2c)) & ~(ICR_MA | ICR_START | ICR_STOP),
+ _ICR(i2c));
}
static int i2c_pxa_wait_bus_not_busy(struct pxa_i2c *i2c)
{
int timeout = DEF_TIMEOUT;
- while (timeout-- && ISR & (ISR_IBB | ISR_UB)) {
- if ((ISR & ISR_SAD) != 0)
+ while (timeout-- && readl(_ISR(i2c)) & (ISR_IBB | ISR_UB)) {
+ if ((readl(_ISR(i2c)) & ISR_SAD) != 0)
timeout += 4;
msleep(2);
@@ -214,9 +230,9 @@
while (time_before(jiffies, timeout)) {
if (i2c_debug > 1)
dev_dbg(&i2c->adap.dev, "%s: %ld: ISR=%08x, ICR=%08x, IBMR=%02x\n",
- __func__, (long)jiffies, ISR, ICR, IBMR);
+ __func__, (long)jiffies, readl(_ISR(i2c)), readl(_ICR(i2c)), readl(_IBMR(i2c)));
- if (ISR & ISR_SAD) {
+ if (readl(_ISR(i2c)) & ISR_SAD) {
if (i2c_debug > 0)
dev_dbg(&i2c->adap.dev, "%s: Slave detected\n", __func__);
goto out;
@@ -226,7 +242,7 @@
* quick check of the i2c lines themselves to ensure they've
* gone high...
*/
- if ((ISR & (ISR_UB | ISR_IBB)) == 0 && IBMR == 3) {
+ if ((readl(_ISR(i2c)) & (ISR_UB | ISR_IBB)) == 0 && readl(_IBMR(i2c)) == 3) {
if (i2c_debug > 0)
dev_dbg(&i2c->adap.dev, "%s: done\n", __func__);
return 1;
@@ -246,7 +262,7 @@
if (i2c_debug)
dev_dbg(&i2c->adap.dev, "setting to bus master\n");
- if ((ISR & (ISR_UB | ISR_IBB)) != 0) {
+ if ((readl(_ISR(i2c)) & (ISR_UB | ISR_IBB)) != 0) {
dev_dbg(&i2c->adap.dev, "%s: unit is busy\n", __func__);
if (!i2c_pxa_wait_master(i2c)) {
dev_dbg(&i2c->adap.dev, "%s: error: unit busy\n", __func__);
@@ -254,7 +270,7 @@
}
}
- ICR |= ICR_SCLE;
+ writel(readl(_ICR(i2c)) | ICR_SCLE, _ICR(i2c));
return 0;
}
@@ -270,11 +286,11 @@
while (time_before(jiffies, timeout)) {
if (i2c_debug > 1)
dev_dbg(&i2c->adap.dev, "%s: %ld: ISR=%08x, ICR=%08x, IBMR=%02x\n",
- __func__, (long)jiffies, ISR, ICR, IBMR);
+ __func__, (long)jiffies, readl(_ISR(i2c)), readl(_ICR(i2c)), readl(_IBMR(i2c)));
- if ((ISR & (ISR_UB|ISR_IBB)) == 0 ||
- (ISR & ISR_SAD) != 0 ||
- (ICR & ICR_SCLE) == 0) {
+ if ((readl(_ISR(i2c)) & (ISR_UB|ISR_IBB)) == 0 ||
+ (readl(_ISR(i2c)) & ISR_SAD) != 0 ||
+ (readl(_ICR(i2c)) & ICR_SCLE) == 0) {
if (i2c_debug > 1)
dev_dbg(&i2c->adap.dev, "%s: done\n", __func__);
return 1;
@@ -302,9 +318,9 @@
/* we need to wait for the stop condition to end */
/* if we where in stop, then clear... */
- if (ICR & ICR_STOP) {
+ if (readl(_ICR(i2c)) & ICR_STOP) {
udelay(100);
- ICR &= ~ICR_STOP;
+ writel(readl(_ICR(i2c)) & ~ICR_STOP, _ICR(i2c));
}
if (!i2c_pxa_wait_slave(i2c)) {
@@ -314,12 +330,12 @@
}
}
- ICR &= ~(ICR_STOP|ICR_ACKNAK|ICR_MA);
- ICR &= ~ICR_SCLE;
+ writel(readl(_ICR(i2c)) & ~(ICR_STOP|ICR_ACKNAK|ICR_MA), _ICR(i2c));
+ writel(readl(_ICR(i2c)) & ~ICR_SCLE, _ICR(i2c));
if (i2c_debug) {
- dev_dbg(&i2c->adap.dev, "ICR now %08x, ISR %08x\n", ICR, ISR);
- decode_ICR(ICR);
+ dev_dbg(&i2c->adap.dev, "ICR now %08x, ISR %08x\n", readl(_ICR(i2c)), readl(_ISR(i2c)));
+ decode_ICR(readl(_ICR(i2c)));
}
}
#else
@@ -334,24 +350,24 @@
i2c_pxa_abort(i2c);
/* reset according to 9.8 */
- ICR = ICR_UR;
- ISR = I2C_ISR_INIT;
- ICR &= ~ICR_UR;
+ writel(ICR_UR, _ICR(i2c));
+ writel(I2C_ISR_INIT, _ISR(i2c));
+ writel(readl(_ICR(i2c)) & ~ICR_UR, _ICR(i2c));
- ISAR = i2c->slave_addr;
+ writel(i2c->slave_addr, _ISAR(i2c));
/* set control register values */
- ICR = I2C_ICR_INIT;
+ writel(I2C_ICR_INIT, _ICR(i2c));
#ifdef CONFIG_I2C_PXA_SLAVE
dev_info(&i2c->adap.dev, "Enabling slave mode\n");
- ICR |= ICR_SADIE | ICR_ALDIE | ICR_SSDIE;
+ writel(readl(_ICR(i2c)) | ICR_SADIE | ICR_ALDIE | ICR_SSDIE, _ICR(i2c));
#endif
i2c_pxa_set_slave(i2c, 0);
/* enable unit */
- ICR |= ICR_IUE;
+ writel(readl(_ICR(i2c)) | ICR_IUE, _ICR(i2c));
udelay(100);
}
@@ -371,19 +387,19 @@
if (i2c->slave != NULL)
ret = i2c->slave->read(i2c->slave->data);
- IDBR = ret;
- ICR |= ICR_TB; /* allow next byte */
+ writel(ret, _IDBR(i2c));
+ writel(readl(_ICR(i2c)) | ICR_TB, _ICR(i2c)); /* allow next byte */
}
}
static void i2c_pxa_slave_rxfull(struct pxa_i2c *i2c, u32 isr)
{
- unsigned int byte = IDBR;
+ unsigned int byte = readl(_IDBR(i2c));
if (i2c->slave != NULL)
i2c->slave->write(i2c->slave->data, byte);
- ICR |= ICR_TB;
+ writel(readl(_ICR(i2c)) | ICR_TB, _ICR(i2c));
}
static void i2c_pxa_slave_start(struct pxa_i2c *i2c, u32 isr)
@@ -403,13 +419,13 @@
* start condition... if this happens, we'd better back off
* and stop holding the poor thing up
*/
- ICR &= ~(ICR_START|ICR_STOP);
- ICR |= ICR_TB;
+ writel(readl(_ICR(i2c)) & ~(ICR_START|ICR_STOP), _ICR(i2c));
+ writel(readl(_ICR(i2c)) | ICR_TB, _ICR(i2c));
timeout = 0x10000;
while (1) {
- if ((IBMR & 2) == 2)
+ if ((readl(_IBMR(i2c)) & 2) == 2)
break;
timeout--;
@@ -420,7 +436,7 @@
}
}
- ICR &= ~ICR_SCLE;
+ writel(readl(_ICR(i2c)) & ~ICR_SCLE, _ICR(i2c));
}
static void i2c_pxa_slave_stop(struct pxa_i2c *i2c)
@@ -447,14 +463,14 @@
if (isr & ISR_BED) {
/* what should we do here? */
} else {
- IDBR = 0;
- ICR |= ICR_TB;
+ writel(0, _IDBR(i2c));
+ writel(readl(_ICR(i2c)) | ICR_TB, _ICR(i2c));
}
}
static void i2c_pxa_slave_rxfull(struct pxa_i2c *i2c, u32 isr)
{
- ICR |= ICR_TB | ICR_ACKNAK;
+ writel(readl(_ICR(i2c)) | ICR_TB | ICR_ACKNAK, _ICR(i2c));
}
static void i2c_pxa_slave_start(struct pxa_i2c *i2c, u32 isr)
@@ -466,13 +482,13 @@
* start condition... if this happens, we'd better back off
* and stop holding the poor thing up
*/
- ICR &= ~(ICR_START|ICR_STOP);
- ICR |= ICR_TB | ICR_ACKNAK;
+ writel(readl(_ICR(i2c)) & ~(ICR_START|ICR_STOP), _ICR(i2c));
+ writel(readl(_ICR(i2c)) | ICR_TB | ICR_ACKNAK, _ICR(i2c));
timeout = 0x10000;
while (1) {
- if ((IBMR & 2) == 2)
+ if ((readl(_IBMR(i2c)) & 2) == 2)
break;
timeout--;
@@ -483,7 +499,7 @@
}
}
- ICR &= ~ICR_SCLE;
+ writel(readl(_ICR(i2c)) & ~ICR_SCLE, _ICR(i2c));
}
static void i2c_pxa_slave_stop(struct pxa_i2c *i2c)
@@ -514,13 +530,13 @@
/*
* Step 1: target slave address into IDBR
*/
- IDBR = i2c_pxa_addr_byte(i2c->msg);
+ writel(i2c_pxa_addr_byte(i2c->msg), _IDBR(i2c));
/*
* Step 2: initiate the write.
*/
- icr = ICR & ~(ICR_STOP | ICR_ALDIE);
- ICR = icr | ICR_START | ICR_TB;
+ icr = readl(_ICR(i2c)) & ~(ICR_STOP | ICR_ALDIE);
+ writel(icr | ICR_START | ICR_TB, _ICR(i2c));
}
/*
@@ -594,7 +610,7 @@
static void i2c_pxa_irq_txempty(struct pxa_i2c *i2c, u32 isr)
{
- u32 icr = ICR & ~(ICR_START|ICR_STOP|ICR_ACKNAK|ICR_TB);
+ u32 icr = readl(_ICR(i2c)) & ~(ICR_START|ICR_STOP|ICR_ACKNAK|ICR_TB);
again:
/*
@@ -645,7 +661,7 @@
/*
* Write mode. Write the next data byte.
*/
- IDBR = i2c->msg->buf[i2c->msg_ptr++];
+ writel(i2c->msg->buf[i2c->msg_ptr++], _IDBR(i2c));
icr |= ICR_ALDIE | ICR_TB;
@@ -675,7 +691,7 @@
/*
* Write the next address.
*/
- IDBR = i2c_pxa_addr_byte(i2c->msg);
+ writel(i2c_pxa_addr_byte(i2c->msg), _IDBR(i2c));
/*
* And trigger a repeated start, and send the byte.
@@ -696,18 +712,18 @@
i2c->icrlog[i2c->irqlogidx-1] = icr;
- ICR = icr;
+ writel(icr, _ICR(i2c));
show_state(i2c);
}
static void i2c_pxa_irq_rxfull(struct pxa_i2c *i2c, u32 isr)
{
- u32 icr = ICR & ~(ICR_START|ICR_STOP|ICR_ACKNAK|ICR_TB);
+ u32 icr = readl(_ICR(i2c)) & ~(ICR_START|ICR_STOP|ICR_ACKNAK|ICR_TB);
/*
* Read the byte.
*/
- i2c->msg->buf[i2c->msg_ptr++] = IDBR;
+ i2c->msg->buf[i2c->msg_ptr++] = readl(_IDBR(i2c));
if (i2c->msg_ptr < i2c->msg->len) {
/*
@@ -724,17 +740,17 @@
i2c->icrlog[i2c->irqlogidx-1] = icr;
- ICR = icr;
+ writel(icr, _ICR(i2c));
}
static irqreturn_t i2c_pxa_handler(int this_irq, void *dev_id)
{
struct pxa_i2c *i2c = dev_id;
- u32 isr = ISR;
+ u32 isr = readl(_ISR(i2c));
if (i2c_debug > 2 && 0) {
dev_dbg(&i2c->adap.dev, "%s: ISR=%08x, ICR=%08x, IBMR=%02x\n",
- __func__, isr, ICR, IBMR);
+ __func__, isr, readl(_ICR(i2c)), readl(_IBMR(i2c)));
decode_ISR(isr);
}
@@ -746,7 +762,7 @@
/*
* Always clear all pending IRQs.
*/
- ISR = isr & (ISR_SSD|ISR_ALD|ISR_ITE|ISR_IRF|ISR_SAD|ISR_BED);
+ writel(isr & (ISR_SSD|ISR_ALD|ISR_ITE|ISR_IRF|ISR_SAD|ISR_BED), _ISR(i2c));
if (isr & ISR_SAD)
i2c_pxa_slave_start(i2c, isr);
@@ -779,7 +795,7 @@
/* If the I2C controller is disabled we need to reset it (probably due
to a suspend/resume destroying state). We do this here as we can then
avoid worrying about resuming the controller before its users. */
- if (!(ICR & ICR_IUE))
+ if (!(readl(_ICR(i2c)) & ICR_IUE))
i2c_pxa_reset(i2c);
for (i = adap->retries; i >= 0; i--) {
@@ -810,28 +826,53 @@
static struct pxa_i2c i2c_pxa = {
.lock = SPIN_LOCK_UNLOCKED,
- .wait = __WAIT_QUEUE_HEAD_INITIALIZER(i2c_pxa.wait),
.adap = {
.owner = THIS_MODULE,
.algo = &i2c_pxa_algorithm,
- .name = "pxa2xx-i2c",
+ .name = "pxa2xx-i2c.0",
.retries = 5,
},
};
+#define res_len(r) ((r)->end - (r)->start + 1)
static int i2c_pxa_probe(struct platform_device *dev)
{
struct pxa_i2c *i2c = &i2c_pxa;
+ struct resource *res;
#ifdef CONFIG_I2C_PXA_SLAVE
struct i2c_pxa_platform_data *plat = dev->dev.platform_data;
#endif
int ret;
+ int irq;
-#ifdef CONFIG_PXA27x
- pxa_gpio_mode(GPIO117_I2CSCL_MD);
- pxa_gpio_mode(GPIO118_I2CSDA_MD);
- udelay(100);
-#endif
+ res = platform_get_resource(dev, IORESOURCE_MEM, 0);
+ irq = platform_get_irq(dev, 0);
+ if (res == NULL || irq < 0)
+ return -ENODEV;
+
+ if (!request_mem_region(res->start, res_len(res), res->name))
+ return -ENOMEM;
+
+ i2c = kmalloc(sizeof(struct pxa_i2c), GFP_KERNEL);
+ if (!i2c) {
+ ret = -ENOMEM;
+ goto emalloc;
+ }
+
+ memcpy(i2c, &i2c_pxa, sizeof(struct pxa_i2c));
+ init_waitqueue_head(&i2c->wait);
+ i2c->adap.name[strlen(i2c->adap.name) - 1] = '0' + dev->id % 10;
+
+ i2c->reg_base = ioremap(res->start, res_len(res));
+ if (!i2c->reg_base) {
+ ret = -EIO;
+ goto eremap;
+ }
+
+ i2c->iobase = res->start;
+ i2c->iosize = res_len(res);
+
+ i2c->irq = irq;
i2c->slave_addr = I2C_PXA_SLAVE_ADDR;
@@ -842,11 +883,28 @@
}
#endif
- pxa_set_cken(CKEN14_I2C, 1);
- ret = request_irq(IRQ_I2C, i2c_pxa_handler, IRQF_DISABLED,
- "pxa2xx-i2c", i2c);
+ switch (dev->id) {
+ case 0:
+#ifdef CONFIG_PXA27x
+ pxa_gpio_mode(GPIO117_I2CSCL_MD);
+ pxa_gpio_mode(GPIO118_I2CSDA_MD);
+#endif
+ pxa_set_cken(CKEN14_I2C, 1);
+ break;
+#ifdef CONFIG_PXA27x
+ case 1:
+ local_irq_disable();
+ PCFR |= PCFR_PI2CEN;
+ local_irq_enable();
+ pxa_set_cken(CKEN15_PWRI2C, 1);
+#endif
+ }
+
+ ret = request_irq(irq, i2c_pxa_handler, IRQF_DISABLED,
+ i2c->adap.name, i2c);
if (ret)
- goto out;
+ goto ereqirq;
+
i2c_pxa_reset(i2c);
@@ -856,7 +914,7 @@
ret = i2c_add_adapter(&i2c->adap);
if (ret < 0) {
printk(KERN_INFO "I2C: Failed to add bus\n");
- goto err_irq;
+ goto eadapt;
}
platform_set_drvdata(dev, i2c);
@@ -870,9 +928,25 @@
#endif
return 0;
- err_irq:
- free_irq(IRQ_I2C, i2c);
- out:
+eadapt:
+ free_irq(irq, i2c);
+ereqirq:
+ switch (dev->id) {
+ case 0:
+ pxa_set_cken(CKEN14_I2C, 0);
+ break;
+#ifdef CONFIG_PXA27x
+ case 1:
+ pxa_set_cken(CKEN15_PWRI2C, 0);
+ local_irq_disable();
+ PCFR &= ~PCFR_PI2CEN;
+ local_irq_enable();
+#endif
+ }
+eremap:
+ kfree(i2c);
+emalloc:
+ release_mem_region(res->start, res_len(res));
return ret;
}
@@ -883,8 +957,21 @@
platform_set_drvdata(dev, NULL);
i2c_del_adapter(&i2c->adap);
- free_irq(IRQ_I2C, i2c);
- pxa_set_cken(CKEN14_I2C, 0);
+ free_irq(i2c->irq, i2c);
+ switch (dev->id) {
+ case 0:
+ pxa_set_cken(CKEN14_I2C, 0);
+ break;
+#ifdef CONFIG_PXA27x
+ case 1:
+ pxa_set_cken(CKEN15_PWRI2C, 0);
+ local_irq_disable();
+ PCFR &= ~PCFR_PI2CEN;
+ local_irq_enable();
+#endif
+ }
+ release_mem_region(i2c->iobase, i2c->iosize);
+ kfree(i2c);
return 0;
}
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index ec03341..350764e 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -797,6 +797,14 @@
to transfer data to and from memory. Saying Y is safe and improves
performance.
+config BLK_DEV_IDE_CELLEB
+ bool "Toshiba's Cell Reference Set IDE support"
+ depends on PPC_CELLEB
+ help
+ This driver provides support for the built-in IDE controller on
+ Toshiba Cell Reference Board.
+ If unsure, say Y.
+
config BLK_DEV_IDE_SWARM
tristate "IDE for Sibyte evaluation boards"
depends on SIBYTE_SB1xxx_SOC
diff --git a/drivers/ide/Makefile b/drivers/ide/Makefile
index d9f029e..28feedf 100644
--- a/drivers/ide/Makefile
+++ b/drivers/ide/Makefile
@@ -37,6 +37,7 @@
# built-in only drivers from ppc/
ide-core-$(CONFIG_BLK_DEV_MPC8xx_IDE) += ppc/mpc8xx.o
ide-core-$(CONFIG_BLK_DEV_IDE_PMAC) += ppc/pmac.o
+ide-core-$(CONFIG_BLK_DEV_IDE_CELLEB) += ppc/scc_pata.o
# built-in only drivers from h8300/
ide-core-$(CONFIG_H8300) += h8300/ide-h8300.o
diff --git a/drivers/ide/arm/icside.c b/drivers/ide/arm/icside.c
index 8a1c27f..40e5c66 100644
--- a/drivers/ide/arm/icside.c
+++ b/drivers/ide/arm/icside.c
@@ -307,26 +307,24 @@
return on;
}
-static int icside_dma_host_off(ide_drive_t *drive)
+static void icside_dma_host_off(ide_drive_t *drive)
{
- return 0;
}
-static int icside_dma_off_quietly(ide_drive_t *drive)
+static void icside_dma_off_quietly(ide_drive_t *drive)
{
drive->using_dma = 0;
- return icside_dma_host_off(drive);
}
-static int icside_dma_host_on(ide_drive_t *drive)
+static void icside_dma_host_on(ide_drive_t *drive)
{
- return 0;
}
static int icside_dma_on(ide_drive_t *drive)
{
drive->using_dma = 1;
- return icside_dma_host_on(drive);
+
+ return 0;
}
static int icside_dma_check(ide_drive_t *drive)
@@ -365,10 +363,7 @@
out:
on = icside_set_speed(drive, xfer_mode);
- if (on)
- return icside_dma_on(drive);
- else
- return icside_dma_off_quietly(drive);
+ return on ? 0 : -1;
}
static int icside_dma_end(ide_drive_t *drive)
@@ -497,9 +492,9 @@
hwif->autodma = autodma;
hwif->ide_dma_check = icside_dma_check;
- hwif->ide_dma_host_off = icside_dma_host_off;
- hwif->ide_dma_off_quietly = icside_dma_off_quietly;
- hwif->ide_dma_host_on = icside_dma_host_on;
+ hwif->dma_host_off = icside_dma_host_off;
+ hwif->dma_off_quietly = icside_dma_off_quietly;
+ hwif->dma_host_on = icside_dma_host_on;
hwif->ide_dma_on = icside_dma_on;
hwif->dma_setup = icside_dma_setup;
hwif->dma_exec_cmd = icside_dma_exec_cmd;
@@ -556,7 +551,7 @@
* Ensure we're using MMIO
*/
default_hwif_mmiops(hwif);
- hwif->mmio = 2;
+ hwif->mmio = 1;
for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++) {
hwif->hw.io_ports[i] = port;
diff --git a/drivers/ide/arm/rapide.c b/drivers/ide/arm/rapide.c
index 3058217..9c6c49f 100644
--- a/drivers/ide/arm/rapide.c
+++ b/drivers/ide/arm/rapide.c
@@ -46,7 +46,7 @@
hwif->hw.io_ports[IDE_CONTROL_OFFSET] = (unsigned long)ctrl;
hwif->io_ports[IDE_CONTROL_OFFSET] = (unsigned long)ctrl;
hwif->hw.irq = hwif->irq = irq;
- hwif->mmio = 2;
+ hwif->mmio = 1;
default_hwif_mmiops(hwif);
return hwif;
diff --git a/drivers/ide/cris/ide-cris.c b/drivers/ide/cris/ide-cris.c
index 5797e0b..6b2d152 100644
--- a/drivers/ide/cris/ide-cris.c
+++ b/drivers/ide/cris/ide-cris.c
@@ -682,9 +682,12 @@
static void cris_ide_output_data (ide_drive_t *drive, void *, unsigned int);
static void cris_atapi_input_bytes(ide_drive_t *drive, void *, unsigned int);
static void cris_atapi_output_bytes(ide_drive_t *drive, void *, unsigned int);
-static int cris_dma_off (ide_drive_t *drive);
static int cris_dma_on (ide_drive_t *drive);
+static void cris_dma_off(ide_drive_t *drive)
+{
+}
+
static void tune_cris_ide(ide_drive_t *drive, u8 pio)
{
int setup, strobe, hold;
@@ -795,7 +798,7 @@
0, 0, cris_ide_ack_intr,
ide_default_irq(0));
ide_register_hw(&hw, &hwif);
- hwif->mmio = 2;
+ hwif->mmio = 1;
hwif->chipset = ide_etrax100;
hwif->tuneproc = &tune_cris_ide;
hwif->speedproc = &speed_cris_ide;
@@ -814,13 +817,16 @@
hwif->OUTBSYNC = &cris_ide_outbsync;
hwif->INB = &cris_ide_inb;
hwif->INW = &cris_ide_inw;
- hwif->ide_dma_host_off = &cris_dma_off;
- hwif->ide_dma_host_on = &cris_dma_on;
- hwif->ide_dma_off_quietly = &cris_dma_off;
+ hwif->dma_host_off = &cris_dma_off;
+ hwif->dma_host_on = &cris_dma_on;
+ hwif->dma_off_quietly = &cris_dma_off;
hwif->udma_four = 0;
hwif->ultra_mask = cris_ultra_mask;
hwif->mwdma_mask = 0x07; /* Multiword DMA 0-2 */
hwif->swdma_mask = 0x07; /* Singleword DMA 0-2 */
+ hwif->autodma = 1;
+ hwif->drives[0].autodma = 1;
+ hwif->drives[1].autodma = 1;
}
/* Reset pulse */
@@ -835,11 +841,6 @@
cris_ide_set_speed(TYPE_UDMA, ATA_UDMA2_CYC, ATA_UDMA2_DVS, 0);
}
-static int cris_dma_off (ide_drive_t *drive)
-{
- return 0;
-}
-
static int cris_dma_on (ide_drive_t *drive)
{
return 0;
@@ -1045,17 +1046,10 @@
static int cris_dma_check(ide_drive_t *drive)
{
- ide_hwif_t *hwif = drive->hwif;
- struct hd_driveid* id = drive->id;
+ if (ide_use_dma(drive) && cris_config_drive_for_dma(drive))
+ return 0;
- if (id && (id->capability & 1)) {
- if (ide_use_dma(drive)) {
- if (cris_config_drive_for_dma(drive))
- return hwif->ide_dma_on(drive);
- }
- }
-
- return hwif->ide_dma_off_quietly(drive);
+ return -1;
}
static int cris_dma_end(ide_drive_t *drive)
diff --git a/drivers/ide/h8300/ide-h8300.c b/drivers/ide/h8300/ide-h8300.c
index 608ca87..88750a3 100644
--- a/drivers/ide/h8300/ide-h8300.c
+++ b/drivers/ide/h8300/ide-h8300.c
@@ -76,13 +76,11 @@
{
default_hwif_iops(hwif);
- hwif->mmio = 2;
+ hwif->mmio = 1;
hwif->OUTW = mm_outw;
hwif->OUTSW = mm_outsw;
hwif->INW = mm_inw;
hwif->INSW = mm_insw;
- hwif->OUTL = NULL;
- hwif->INL = NULL;
hwif->OUTSL = NULL;
hwif->INSL = NULL;
}
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index 5969cec..45a928c 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -687,15 +687,8 @@
static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret)
{
struct request *rq = HWGROUP(drive)->rq;
- ide_hwif_t *hwif = HWIF(drive);
int stat, err, sense_key;
- /* We may have bogus DMA interrupts in PIO state here */
- if (HWIF(drive)->dma_status && hwif->atapi_irq_bogon) {
- stat = hwif->INB(hwif->dma_status);
- /* Should we force the bit as well ? */
- hwif->OUTB(stat, hwif->dma_status);
- }
/* Check for errors. */
stat = HWIF(drive)->INB(IDE_STATUS_REG);
if (stat_ret)
@@ -930,6 +923,10 @@
HWIF(drive)->OUTB(drive->ctl, IDE_CONTROL_REG);
if (CDROM_CONFIG_FLAGS (drive)->drq_interrupt) {
+ /* waiting for CDB interrupt, not DMA yet. */
+ if (info->dma)
+ drive->waiting_for_dma = 0;
+
/* packet command */
ide_execute_command(drive, WIN_PACKETCMD, handler, ATAPI_WAIT_PC, cdrom_timer_expiry);
return ide_started;
@@ -972,6 +969,10 @@
/* Check for errors. */
if (cdrom_decode_status(drive, DRQ_STAT, NULL))
return ide_stopped;
+
+ /* Ok, next interrupt will be DMA interrupt. */
+ if (info->dma)
+ drive->waiting_for_dma = 1;
} else {
/* Otherwise, we must wait for DRQ to get set. */
if (ide_wait_stat(&startstop, drive, DRQ_STAT,
@@ -1103,7 +1104,7 @@
if (dma) {
info->dma = 0;
if ((dma_error = HWIF(drive)->ide_dma_end(drive)))
- __ide_dma_off(drive);
+ ide_dma_off(drive);
}
if (cdrom_decode_status(drive, 0, &stat))
@@ -1699,7 +1700,7 @@
if (dma) {
if (dma_error) {
printk(KERN_ERR "ide-cd: dma error\n");
- __ide_dma_off(drive);
+ ide_dma_off(drive);
return ide_error(drive, "dma error", stat);
}
@@ -1825,7 +1826,7 @@
info->dma = 0;
if ((dma_error = HWIF(drive)->ide_dma_end(drive))) {
printk(KERN_ERR "ide-cd: write dma error\n");
- __ide_dma_off(drive);
+ ide_dma_off(drive);
}
}
@@ -3254,14 +3255,6 @@
if (drive->autotune == IDE_TUNE_DEFAULT ||
drive->autotune == IDE_TUNE_AUTO)
drive->dsc_overlap = (drive->next != drive);
-#if 0
- drive->dsc_overlap = (HWIF(drive)->no_dsc) ? 0 : 1;
- if (HWIF(drive)->no_dsc) {
- printk(KERN_INFO "ide-cd: %s: disabling DSC overlap\n",
- drive->name);
- drive->dsc_overlap = 0;
- }
-#endif
if (ide_cdrom_register(drive, nslots)) {
printk (KERN_ERR "%s: ide_cdrom_setup failed to register device with the cdrom driver.\n", drive->name);
@@ -3360,21 +3353,16 @@
{
struct gendisk *disk = inode->i_bdev->bd_disk;
struct cdrom_info *info;
- ide_drive_t *drive;
int rc = -ENOMEM;
if (!(info = ide_cd_get(disk)))
return -ENXIO;
- drive = info->drive;
-
- drive->usage++;
-
if (!info->buffer)
- info->buffer = kmalloc(SECTOR_BUFFER_SIZE,
- GFP_KERNEL|__GFP_REPEAT);
- if (!info->buffer || (rc = cdrom_open(&info->devinfo, inode, file)))
- drive->usage--;
+ info->buffer = kmalloc(SECTOR_BUFFER_SIZE, GFP_KERNEL|__GFP_REPEAT);
+
+ if (info->buffer)
+ rc = cdrom_open(&info->devinfo, inode, file);
if (rc < 0)
ide_cd_put(info);
@@ -3386,10 +3374,8 @@
{
struct gendisk *disk = inode->i_bdev->bd_disk;
struct cdrom_info *info = ide_cd_g(disk);
- ide_drive_t *drive = info->drive;
cdrom_release (&info->devinfo, file);
- drive->usage--;
ide_cd_put(info);
diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c
index 0a05a37..e2cea18 100644
--- a/drivers/ide/ide-disk.c
+++ b/drivers/ide/ide-disk.c
@@ -77,6 +77,7 @@
ide_driver_t *driver;
struct gendisk *disk;
struct kref kref;
+ unsigned int openers; /* protected by BKL for now */
};
static DEFINE_MUTEX(idedisk_ref_mutex);
@@ -1081,8 +1082,9 @@
drive = idkp->drive;
- drive->usage++;
- if (drive->removable && drive->usage == 1) {
+ idkp->openers++;
+
+ if (drive->removable && idkp->openers == 1) {
ide_task_t args;
memset(&args, 0, sizeof(ide_task_t));
args.tfRegister[IDE_COMMAND_OFFSET] = WIN_DOORLOCK;
@@ -1106,9 +1108,10 @@
struct ide_disk_obj *idkp = ide_disk_g(disk);
ide_drive_t *drive = idkp->drive;
- if (drive->usage == 1)
+ if (idkp->openers == 1)
ide_cacheflush_p(drive);
- if (drive->removable && drive->usage == 1) {
+
+ if (drive->removable && idkp->openers == 1) {
ide_task_t args;
memset(&args, 0, sizeof(ide_task_t));
args.tfRegister[IDE_COMMAND_OFFSET] = WIN_DOORUNLOCK;
@@ -1117,7 +1120,8 @@
if (drive->doorlocking && ide_raw_taskfile(drive, &args, NULL))
drive->doorlocking = 0;
}
- drive->usage--;
+
+ idkp->openers--;
ide_disk_put(idkp);
diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c
index 56efed6..08e7cd0 100644
--- a/drivers/ide/ide-dma.c
+++ b/drivers/ide/ide-dma.c
@@ -348,15 +348,14 @@
static int config_drive_for_dma (ide_drive_t *drive)
{
struct hd_driveid *id = drive->id;
- ide_hwif_t *hwif = HWIF(drive);
- if ((id->capability & 1) && hwif->autodma) {
+ if ((id->capability & 1) && drive->hwif->autodma) {
/*
* Enable DMA on any drive that has
* UltraDMA (mode 0/1/2/3/4/5/6) enabled
*/
if ((id->field_valid & 4) && ((id->dma_ultra >> 8) & 0x7f))
- return hwif->ide_dma_on(drive);
+ return 0;
/*
* Enable DMA on any drive that has mode2 DMA
* (multi or single) enabled
@@ -364,14 +363,14 @@
if (id->field_valid & 2) /* regular DMA */
if ((id->dma_mword & 0x404) == 0x404 ||
(id->dma_1word & 0x404) == 0x404)
- return hwif->ide_dma_on(drive);
+ return 0;
/* Consult the list of known "good" drives */
if (__ide_dma_good_drive(drive))
- return hwif->ide_dma_on(drive);
+ return 0;
}
-// if (hwif->tuneproc != NULL) hwif->tuneproc(drive, 255);
- return hwif->ide_dma_off_quietly(drive);
+
+ return -1;
}
/**
@@ -415,72 +414,68 @@
}
/**
- * __ide_dma_host_off - Generic DMA kill
+ * ide_dma_host_off - Generic DMA kill
* @drive: drive to control
*
* Perform the generic IDE controller DMA off operation. This
* works for most IDE bus mastering controllers
*/
-int __ide_dma_host_off (ide_drive_t *drive)
+void ide_dma_host_off(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
u8 unit = (drive->select.b.unit & 0x01);
u8 dma_stat = hwif->INB(hwif->dma_status);
hwif->OUTB((dma_stat & ~(1<<(5+unit))), hwif->dma_status);
- return 0;
}
-EXPORT_SYMBOL(__ide_dma_host_off);
+EXPORT_SYMBOL(ide_dma_host_off);
/**
- * __ide_dma_host_off_quietly - Generic DMA kill
+ * ide_dma_off_quietly - Generic DMA kill
* @drive: drive to control
*
* Turn off the current DMA on this IDE controller.
*/
-int __ide_dma_off_quietly (ide_drive_t *drive)
+void ide_dma_off_quietly(ide_drive_t *drive)
{
drive->using_dma = 0;
ide_toggle_bounce(drive, 0);
- if (HWIF(drive)->ide_dma_host_off(drive))
- return 1;
-
- return 0;
+ drive->hwif->dma_host_off(drive);
}
-EXPORT_SYMBOL(__ide_dma_off_quietly);
+EXPORT_SYMBOL(ide_dma_off_quietly);
#endif /* CONFIG_BLK_DEV_IDEDMA_PCI */
/**
- * __ide_dma_off - disable DMA on a device
+ * ide_dma_off - disable DMA on a device
* @drive: drive to disable DMA on
*
* Disable IDE DMA for a device on this IDE controller.
* Inform the user that DMA has been disabled.
*/
-int __ide_dma_off (ide_drive_t *drive)
+void ide_dma_off(ide_drive_t *drive)
{
printk(KERN_INFO "%s: DMA disabled\n", drive->name);
- return HWIF(drive)->ide_dma_off_quietly(drive);
+ drive->hwif->dma_off_quietly(drive);
}
-EXPORT_SYMBOL(__ide_dma_off);
+EXPORT_SYMBOL(ide_dma_off);
#ifdef CONFIG_BLK_DEV_IDEDMA_PCI
/**
- * __ide_dma_host_on - Enable DMA on a host
+ * ide_dma_host_on - Enable DMA on a host
* @drive: drive to enable for DMA
*
* Enable DMA on an IDE controller following generic bus mastering
* IDE controller behaviour
*/
-
-int __ide_dma_host_on (ide_drive_t *drive)
+
+void ide_dma_host_on(ide_drive_t *drive)
{
if (drive->using_dma) {
ide_hwif_t *hwif = HWIF(drive);
@@ -488,12 +483,10 @@
u8 dma_stat = hwif->INB(hwif->dma_status);
hwif->OUTB((dma_stat|(1<<(5+unit))), hwif->dma_status);
- return 0;
}
- return 1;
}
-EXPORT_SYMBOL(__ide_dma_host_on);
+EXPORT_SYMBOL(ide_dma_host_on);
/**
* __ide_dma_on - Enable DMA on a device
@@ -511,8 +504,7 @@
drive->using_dma = 1;
ide_toggle_bounce(drive, 1);
- if (HWIF(drive)->ide_dma_host_on(drive))
- return 1;
+ drive->hwif->dma_host_on(drive);
return 0;
}
@@ -565,7 +557,10 @@
}
/* PRD table */
- hwif->OUTL(hwif->dmatable_dma, hwif->dma_prdtable);
+ if (hwif->mmio)
+ writel(hwif->dmatable_dma, (void __iomem *)hwif->dma_prdtable);
+ else
+ outl(hwif->dmatable_dma, hwif->dma_prdtable);
/* specify r/w */
hwif->OUTB(reading, hwif->dma_command);
@@ -680,6 +675,9 @@
struct hd_driveid *id = drive->id;
ide_hwif_t *hwif = drive->hwif;
+ if ((id->capability & 1) == 0 || drive->autodma == 0)
+ return 0;
+
/* consult the list of known "bad" drives */
if (__ide_dma_bad_drive(drive))
return 0;
@@ -753,12 +751,37 @@
return;
bug_dma_off:
printk(", BUG DMA OFF");
- hwif->ide_dma_off_quietly(drive);
+ hwif->dma_off_quietly(drive);
return;
}
EXPORT_SYMBOL(ide_dma_verbose);
+int ide_set_dma(ide_drive_t *drive)
+{
+ ide_hwif_t *hwif = drive->hwif;
+ int rc;
+
+ rc = hwif->ide_dma_check(drive);
+
+ switch(rc) {
+ case -1: /* DMA needs to be disabled */
+ hwif->dma_off_quietly(drive);
+ return 0;
+ case 0: /* DMA needs to be enabled */
+ return hwif->ide_dma_on(drive);
+ case 1: /* DMA setting cannot be changed */
+ break;
+ default:
+ BUG();
+ break;
+ }
+
+ return rc;
+}
+
+EXPORT_SYMBOL_GPL(ide_set_dma);
+
#ifdef CONFIG_BLK_DEV_IDEDMA_PCI
int __ide_dma_lostirq (ide_drive_t *drive)
{
@@ -809,7 +832,7 @@
{
ide_release_dma_engine(hwif);
- if (hwif->mmio == 2)
+ if (hwif->mmio)
return 1;
else
return ide_release_iomio_dma(hwif);
@@ -878,9 +901,9 @@
static int ide_dma_iobase(ide_hwif_t *hwif, unsigned long base, unsigned int ports)
{
- if (hwif->mmio == 2)
+ if (hwif->mmio)
return ide_mapped_mmio_dma(hwif, base,ports);
- BUG_ON(hwif->mmio == 1);
+
return ide_iomio_dma(hwif, base, ports);
}
@@ -908,14 +931,14 @@
if (!(hwif->dma_prdtable))
hwif->dma_prdtable = (hwif->dma_base + 4);
- if (!hwif->ide_dma_off_quietly)
- hwif->ide_dma_off_quietly = &__ide_dma_off_quietly;
- if (!hwif->ide_dma_host_off)
- hwif->ide_dma_host_off = &__ide_dma_host_off;
+ if (!hwif->dma_off_quietly)
+ hwif->dma_off_quietly = &ide_dma_off_quietly;
+ if (!hwif->dma_host_off)
+ hwif->dma_host_off = &ide_dma_host_off;
if (!hwif->ide_dma_on)
hwif->ide_dma_on = &__ide_dma_on;
- if (!hwif->ide_dma_host_on)
- hwif->ide_dma_host_on = &__ide_dma_host_on;
+ if (!hwif->dma_host_on)
+ hwif->dma_host_on = &ide_dma_host_on;
if (!hwif->ide_dma_check)
hwif->ide_dma_check = &__ide_dma_check;
if (!hwif->dma_setup)
diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
index d33717c..57cd21c 100644
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -279,6 +279,7 @@
ide_driver_t *driver;
struct gendisk *disk;
struct kref kref;
+ unsigned int openers; /* protected by BKL for now */
/* Current packet command */
idefloppy_pc_t *pc;
@@ -866,7 +867,7 @@
if (test_and_clear_bit(PC_DMA_IN_PROGRESS, &pc->flags)) {
printk(KERN_ERR "ide-floppy: The floppy wants to issue "
"more interrupts in DMA mode\n");
- (void)__ide_dma_off(drive);
+ ide_dma_off(drive);
return ide_do_reset(drive);
}
@@ -1096,9 +1097,9 @@
pc->current_position = pc->buffer;
bcount.all = min(pc->request_transfer, 63 * 1024);
- if (test_and_clear_bit(PC_DMA_ERROR, &pc->flags)) {
- (void)__ide_dma_off(drive);
- }
+ if (test_and_clear_bit(PC_DMA_ERROR, &pc->flags))
+ ide_dma_off(drive);
+
feature.all = 0;
if (test_bit(PC_DMA_RECOMMENDED, &pc->flags) && drive->using_dma)
@@ -1433,7 +1434,8 @@
drive->bios_cyl = 0;
drive->bios_head = drive->bios_sect = 0;
- floppy->blocks = floppy->bs_factor = 0;
+ floppy->blocks = 0;
+ floppy->bs_factor = 1;
set_capacity(floppy->disk, 0);
idefloppy_create_read_capacity_cmd(&pc);
@@ -1949,9 +1951,9 @@
drive = floppy->drive;
- drive->usage++;
+ floppy->openers++;
- if (drive->usage == 1) {
+ if (floppy->openers == 1) {
clear_bit(IDEFLOPPY_FORMAT_IN_PROGRESS, &floppy->flags);
/* Just in case */
@@ -1969,13 +1971,11 @@
** capacity of the drive or begin the format - Sam
*/
) {
- drive->usage--;
ret = -EIO;
goto out_put_floppy;
}
if (floppy->wp && (filp->f_mode & 2)) {
- drive->usage--;
ret = -EROFS;
goto out_put_floppy;
}
@@ -1987,13 +1987,13 @@
}
check_disk_change(inode->i_bdev);
} else if (test_bit(IDEFLOPPY_FORMAT_IN_PROGRESS, &floppy->flags)) {
- drive->usage--;
ret = -EBUSY;
goto out_put_floppy;
}
return 0;
out_put_floppy:
+ floppy->openers--;
ide_floppy_put(floppy);
return ret;
}
@@ -2007,7 +2007,7 @@
debug_log(KERN_INFO "Reached idefloppy_release\n");
- if (drive->usage == 1) {
+ if (floppy->openers == 1) {
/* IOMEGA Clik! drives do not support lock/unlock commands */
if (!test_bit(IDEFLOPPY_CLIK_DRIVE, &floppy->flags)) {
idefloppy_create_prevent_cmd(&pc, 0);
@@ -2016,7 +2016,8 @@
clear_bit(IDEFLOPPY_FORMAT_IN_PROGRESS, &floppy->flags);
}
- drive->usage--;
+
+ floppy->openers--;
ide_floppy_put(floppy);
@@ -2050,7 +2051,7 @@
prevent = 0;
/* fall through */
case CDROM_LOCKDOOR:
- if (drive->usage > 1)
+ if (floppy->openers > 1)
return -EBUSY;
/* The IOMEGA Clik! Drive doesn't support this command - no room for an eject mechanism */
@@ -2072,7 +2073,7 @@
if (!(file->f_mode & 2))
return -EPERM;
- if (drive->usage > 1) {
+ if (floppy->openers > 1) {
/* Don't format if someone is using the disk */
clear_bit(IDEFLOPPY_FORMAT_IN_PROGRESS,
diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index 2614f41..c193553 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -226,7 +226,7 @@
break;
if (drive->hwif->ide_dma_check == NULL)
break;
- drive->hwif->ide_dma_check(drive);
+ ide_set_dma(drive);
break;
}
pm->pm_step = ide_pm_state_completed;
@@ -1351,7 +1351,7 @@
*/
drive->retry_pio++;
drive->state = DMA_PIO_RETRY;
- (void) hwif->ide_dma_off_quietly(drive);
+ hwif->dma_off_quietly(drive);
/*
* un-busy drive etc (hwgroup->busy is cleared on return) and
@@ -1646,6 +1646,17 @@
del_timer(&hwgroup->timer);
spin_unlock(&ide_lock);
+ /* Some controllers might set DMA INTR no matter DMA or PIO;
+ * bmdma status might need to be cleared even for
+ * PIO interrupts to prevent spurious/lost irq.
+ */
+ if (hwif->ide_dma_clear_irq && !(drive->waiting_for_dma))
+ /* ide_dma_end() needs bmdma status for error checking.
+ * So, skip clearing bmdma status here and leave it
+ * to ide_dma_end() if this is dma interrupt.
+ */
+ hwif->ide_dma_clear_irq(drive);
+
if (drive->unmask)
local_irq_enable_in_hardirq();
/* service this interrupt, may set handler for next interrupt */
diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c
index badde63..c67b3b1 100644
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -49,11 +49,6 @@
insw(port, addr, count);
}
-static u32 ide_inl (unsigned long port)
-{
- return (u32) inl(port);
-}
-
static void ide_insl (unsigned long port, void *addr, u32 count)
{
insl(port, addr, count);
@@ -79,11 +74,6 @@
outsw(port, addr, count);
}
-static void ide_outl (u32 val, unsigned long port)
-{
- outl(val, port);
-}
-
static void ide_outsl (unsigned long port, void *addr, u32 count)
{
outsl(port, addr, count);
@@ -94,12 +84,10 @@
hwif->OUTB = ide_outb;
hwif->OUTBSYNC = ide_outbsync;
hwif->OUTW = ide_outw;
- hwif->OUTL = ide_outl;
hwif->OUTSW = ide_outsw;
hwif->OUTSL = ide_outsl;
hwif->INB = ide_inb;
hwif->INW = ide_inw;
- hwif->INL = ide_inl;
hwif->INSW = ide_insw;
hwif->INSL = ide_insl;
}
@@ -123,11 +111,6 @@
__ide_mm_insw((void __iomem *) port, addr, count);
}
-static u32 ide_mm_inl (unsigned long port)
-{
- return (u32) readl((void __iomem *) port);
-}
-
static void ide_mm_insl (unsigned long port, void *addr, u32 count)
{
__ide_mm_insl((void __iomem *) port, addr, count);
@@ -153,11 +136,6 @@
__ide_mm_outsw((void __iomem *) port, addr, count);
}
-static void ide_mm_outl (u32 value, unsigned long port)
-{
- writel(value, (void __iomem *) port);
-}
-
static void ide_mm_outsl (unsigned long port, void *addr, u32 count)
{
__ide_mm_outsl((void __iomem *) port, addr, count);
@@ -170,12 +148,10 @@
this one is controller specific! */
hwif->OUTBSYNC = ide_mm_outbsync;
hwif->OUTW = ide_mm_outw;
- hwif->OUTL = ide_mm_outl;
hwif->OUTSW = ide_mm_outsw;
hwif->OUTSL = ide_mm_outsl;
hwif->INB = ide_mm_inb;
hwif->INW = ide_mm_inw;
- hwif->INL = ide_mm_inl;
hwif->INSW = ide_mm_insw;
hwif->INSL = ide_mm_insl;
}
@@ -777,7 +753,7 @@
#ifdef CONFIG_BLK_DEV_IDEDMA
if (hwif->ide_dma_check) /* check if host supports DMA */
- hwif->ide_dma_host_off(drive);
+ hwif->dma_host_off(drive);
#endif
/*
@@ -854,9 +830,9 @@
#ifdef CONFIG_BLK_DEV_IDEDMA
if (speed >= XFER_SW_DMA_0)
- hwif->ide_dma_host_on(drive);
+ hwif->dma_host_on(drive);
else if (hwif->ide_dma_check) /* check if host supports DMA */
- hwif->ide_dma_off_quietly(drive);
+ hwif->dma_off_quietly(drive);
#endif
switch(speed) {
@@ -1066,12 +1042,12 @@
{
#ifdef CONFIG_BLK_DEV_IDEDMA
if (drive->crc_count) {
- (void) HWIF(drive)->ide_dma_off_quietly(drive);
+ drive->hwif->dma_off_quietly(drive);
ide_set_xfer_rate(drive, ide_auto_reduce_xfer(drive));
if (drive->current_speed >= XFER_SW_DMA_0)
(void) HWIF(drive)->ide_dma_on(drive);
} else
- (void)__ide_dma_off(drive);
+ ide_dma_off(drive);
#endif
}
diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c
index 8237d89..8afce4c 100644
--- a/drivers/ide/ide-lib.c
+++ b/drivers/ide/ide-lib.c
@@ -205,6 +205,21 @@
EXPORT_SYMBOL(ide_dma_enable);
+int ide_use_fast_pio(ide_drive_t *drive)
+{
+ struct hd_driveid *id = drive->id;
+
+ if ((id->capability & 1) && drive->autodma)
+ return 1;
+
+ if ((id->capability & 8) || (id->field_valid & 2))
+ return 1;
+
+ return 0;
+}
+
+EXPORT_SYMBOL_GPL(ide_use_fast_pio);
+
/*
* Standard (generic) timings for PIO modes, from ATA2 specification.
* These timings are for access to the IDE data port register *only*.
@@ -349,7 +364,6 @@
int use_iordy = 0;
struct hd_driveid* id = drive->id;
int overridden = 0;
- int blacklisted = 0;
if (mode_wanted != 255) {
pio_mode = mode_wanted;
@@ -357,7 +371,6 @@
pio_mode = 0;
} else if ((pio_mode = ide_scan_pio_blacklist(id->model)) != -1) {
overridden = 1;
- blacklisted = 1;
use_iordy = (pio_mode > 2);
} else {
pio_mode = id->tPIO;
@@ -409,7 +422,6 @@
d->cycle_time = cycle_time ? cycle_time : ide_pio_timings[pio_mode].cycle_time;
d->use_iordy = use_iordy;
d->overridden = overridden;
- d->blacklisted = blacklisted;
}
return pio_mode;
}
@@ -462,8 +474,6 @@
return -1;
}
-EXPORT_SYMBOL_GPL(ide_set_xfer_rate);
-
static void ide_dump_opcode(ide_drive_t *drive)
{
struct request *rq;
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index 176bbc8..8afbd6c 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -853,11 +853,11 @@
* things, if not checked and cleared.
* PARANOIA!!!
*/
- hwif->ide_dma_off_quietly(drive);
+ hwif->dma_off_quietly(drive);
#ifdef CONFIG_IDEDMA_ONLYDISK
if (drive->media == ide_disk)
#endif
- hwif->ide_dma_check(drive);
+ ide_set_dma(drive);
}
}
}
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index c6eec04..4e59239 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -1970,7 +1970,7 @@
printk(KERN_ERR "ide-tape: The tape wants to issue more "
"interrupts in DMA mode\n");
printk(KERN_ERR "ide-tape: DMA disabled, reverting to PIO\n");
- (void)__ide_dma_off(drive);
+ ide_dma_off(drive);
return ide_do_reset(drive);
}
/* Get the number of bytes to transfer on this interrupt. */
@@ -2176,7 +2176,7 @@
if (test_and_clear_bit(PC_DMA_ERROR, &pc->flags)) {
printk(KERN_WARNING "ide-tape: DMA disabled, "
"reverting to PIO\n");
- (void)__ide_dma_off(drive);
+ ide_dma_off(drive);
}
if (test_bit(PC_DMA_RECOMMENDED, &pc->flags) && drive->using_dma)
dma_ok = !hwif->dma_setup(drive);
@@ -4792,15 +4792,10 @@
{
struct gendisk *disk = inode->i_bdev->bd_disk;
struct ide_tape_obj *tape;
- ide_drive_t *drive;
if (!(tape = ide_tape_get(disk)))
return -ENXIO;
- drive = tape->drive;
-
- drive->usage++;
-
return 0;
}
@@ -4808,9 +4803,6 @@
{
struct gendisk *disk = inode->i_bdev->bd_disk;
struct ide_tape_obj *tape = ide_tape_g(disk);
- ide_drive_t *drive = tape->drive;
-
- drive->usage--;
ide_tape_put(tape);
diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c
index c750f6c..b3c0818 100644
--- a/drivers/ide/ide.c
+++ b/drivers/ide/ide.c
@@ -389,9 +389,8 @@
unsigned long addr;
unsigned int i;
- if (hwif->mmio == 2)
+ if (hwif->mmio)
return 0;
- BUG_ON(hwif->mmio == 1);
addr = hwif->io_ports[IDE_CONTROL_OFFSET];
if (addr && !hwif_request_region(hwif, addr, 1))
goto control_region_busy;
@@ -438,7 +437,7 @@
{
u32 i = 0;
- if (hwif->mmio == 2)
+ if (hwif->mmio)
return;
if (hwif->io_ports[IDE_CONTROL_OFFSET])
release_region(hwif->io_ports[IDE_CONTROL_OFFSET], 1);
@@ -507,23 +506,22 @@
hwif->ide_dma_end = tmp_hwif->ide_dma_end;
hwif->ide_dma_check = tmp_hwif->ide_dma_check;
hwif->ide_dma_on = tmp_hwif->ide_dma_on;
- hwif->ide_dma_off_quietly = tmp_hwif->ide_dma_off_quietly;
+ hwif->dma_off_quietly = tmp_hwif->dma_off_quietly;
hwif->ide_dma_test_irq = tmp_hwif->ide_dma_test_irq;
- hwif->ide_dma_host_on = tmp_hwif->ide_dma_host_on;
- hwif->ide_dma_host_off = tmp_hwif->ide_dma_host_off;
+ hwif->ide_dma_clear_irq = tmp_hwif->ide_dma_clear_irq;
+ hwif->dma_host_on = tmp_hwif->dma_host_on;
+ hwif->dma_host_off = tmp_hwif->dma_host_off;
hwif->ide_dma_lostirq = tmp_hwif->ide_dma_lostirq;
hwif->ide_dma_timeout = tmp_hwif->ide_dma_timeout;
hwif->OUTB = tmp_hwif->OUTB;
hwif->OUTBSYNC = tmp_hwif->OUTBSYNC;
hwif->OUTW = tmp_hwif->OUTW;
- hwif->OUTL = tmp_hwif->OUTL;
hwif->OUTSW = tmp_hwif->OUTSW;
hwif->OUTSL = tmp_hwif->OUTSL;
hwif->INB = tmp_hwif->INB;
hwif->INW = tmp_hwif->INW;
- hwif->INL = tmp_hwif->INL;
hwif->INSW = tmp_hwif->INSW;
hwif->INSL = tmp_hwif->INSL;
@@ -551,7 +549,6 @@
hwif->extra_ports = tmp_hwif->extra_ports;
hwif->autodma = tmp_hwif->autodma;
hwif->udma_four = tmp_hwif->udma_four;
- hwif->no_dsc = tmp_hwif->no_dsc;
hwif->hwif_data = tmp_hwif->hwif_data;
}
@@ -1138,12 +1135,11 @@
if (HWIF(drive)->ide_dma_check == NULL)
return -EPERM;
if (arg) {
- if (HWIF(drive)->ide_dma_check(drive)) return -EIO;
- if (HWIF(drive)->ide_dma_on(drive)) return -EIO;
- } else {
- if (__ide_dma_off(drive))
+ if (ide_set_dma(drive))
return -EIO;
- }
+ if (HWIF(drive)->ide_dma_on(drive)) return -EIO;
+ } else
+ ide_dma_off(drive);
return 0;
#else
return -EPERM;
diff --git a/drivers/ide/legacy/buddha.c b/drivers/ide/legacy/buddha.c
index 0391a31..1ed224a 100644
--- a/drivers/ide/legacy/buddha.c
+++ b/drivers/ide/legacy/buddha.c
@@ -215,7 +215,7 @@
index = ide_register_hw(&hw, &hwif);
if (index != -1) {
- hwif->mmio = 2;
+ hwif->mmio = 1;
printk("ide%d: ", index);
switch(type) {
case BOARD_BUDDHA:
diff --git a/drivers/ide/legacy/gayle.c b/drivers/ide/legacy/gayle.c
index 64d4261..dcfadbb 100644
--- a/drivers/ide/legacy/gayle.c
+++ b/drivers/ide/legacy/gayle.c
@@ -167,7 +167,7 @@
index = ide_register_hw(&hw, &hwif);
if (index != -1) {
- hwif->mmio = 2;
+ hwif->mmio = 1;
switch (i) {
case 0:
printk("ide%d: Gayle IDE interface (A%d style)\n", index,
diff --git a/drivers/ide/legacy/ht6560b.c b/drivers/ide/legacy/ht6560b.c
index c48e87e..19ccd00 100644
--- a/drivers/ide/legacy/ht6560b.c
+++ b/drivers/ide/legacy/ht6560b.c
@@ -143,16 +143,16 @@
current_timing = timing;
if (drive->media != ide_disk || !drive->present)
select |= HT_PREFETCH_MODE;
- (void) HWIF(drive)->INB(HT_CONFIG_PORT);
- (void) HWIF(drive)->INB(HT_CONFIG_PORT);
- (void) HWIF(drive)->INB(HT_CONFIG_PORT);
- (void) HWIF(drive)->INB(HT_CONFIG_PORT);
- HWIF(drive)->OUTB(select, HT_CONFIG_PORT);
+ (void)inb(HT_CONFIG_PORT);
+ (void)inb(HT_CONFIG_PORT);
+ (void)inb(HT_CONFIG_PORT);
+ (void)inb(HT_CONFIG_PORT);
+ outb(select, HT_CONFIG_PORT);
/*
* Set timing for this drive:
*/
- HWIF(drive)->OUTB(timing, IDE_SELECT_REG);
- (void) HWIF(drive)->INB(IDE_STATUS_REG);
+ outb(timing, IDE_SELECT_REG);
+ (void)inb(IDE_STATUS_REG);
#ifdef DEBUG
printk("ht6560b: %s: select=%#x timing=%#x\n",
drive->name, select, timing);
diff --git a/drivers/ide/legacy/macide.c b/drivers/ide/legacy/macide.c
index b1730d7..4c0079a 100644
--- a/drivers/ide/legacy/macide.c
+++ b/drivers/ide/legacy/macide.c
@@ -141,7 +141,7 @@
}
if (index != -1) {
- hwif->mmio = 2;
+ hwif->mmio = 1;
if (macintosh_config->ide_type == MAC_IDE_QUADRA)
printk(KERN_INFO "ide%d: Macintosh Quadra IDE interface\n", index);
else if (macintosh_config->ide_type == MAC_IDE_PB)
diff --git a/drivers/ide/legacy/q40ide.c b/drivers/ide/legacy/q40ide.c
index 434a94f..74f0812 100644
--- a/drivers/ide/legacy/q40ide.c
+++ b/drivers/ide/legacy/q40ide.c
@@ -145,7 +145,7 @@
index = ide_register_hw(&hw, &hwif);
// **FIXME**
if (index != -1)
- hwif->mmio = 2;
+ hwif->mmio = 1;
}
}
diff --git a/drivers/ide/mips/au1xxx-ide.c b/drivers/ide/mips/au1xxx-ide.c
index c7854ea..0a59d5e 100644
--- a/drivers/ide/mips/au1xxx-ide.c
+++ b/drivers/ide/mips/au1xxx-ide.c
@@ -181,12 +181,6 @@
{
int mem_sttime;
int mem_stcfg;
- unsigned long mode;
-
-#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
- if (ide_use_dma(drive))
- mode = ide_dma_speed(drive, 0);
-#endif
mem_sttime = 0;
mem_stcfg = au_readl(MEM_STCFG2);
@@ -195,7 +189,7 @@
auide_tune_drive(drive, speed - XFER_PIO_0);
return 0;
}
-
+
switch(speed) {
#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
case XFER_MW_DMA_2:
@@ -207,7 +201,6 @@
mem_stcfg &= ~TOECS_MASK;
mem_stcfg |= SBC_IDE_MDMA2_TCSOE | SBC_IDE_MDMA2_TOECS;
- mode = XFER_MW_DMA_2;
break;
case XFER_MW_DMA_1:
mem_sttime = SBC_IDE_TIMING(MDMA1);
@@ -218,7 +211,6 @@
mem_stcfg &= ~TOECS_MASK;
mem_stcfg |= SBC_IDE_MDMA1_TCSOE | SBC_IDE_MDMA1_TOECS;
- mode = XFER_MW_DMA_1;
break;
case XFER_MW_DMA_0:
mem_sttime = SBC_IDE_TIMING(MDMA0);
@@ -229,14 +221,13 @@
mem_stcfg &= ~TOECS_MASK;
mem_stcfg |= SBC_IDE_MDMA0_TCSOE | SBC_IDE_MDMA0_TOECS;
- mode = XFER_MW_DMA_0;
break;
#endif
default:
return 1;
}
-
- if (ide_config_drive_speed(drive, mode))
+
+ if (ide_config_drive_speed(drive, speed))
return 1;
au_writel(mem_sttime,MEM_STTIME2);
@@ -423,9 +414,9 @@
speed = ide_find_best_mode(drive, XFER_PIO | XFER_MWDMA);
if (drive->autodma && (speed & XFER_MODE) != XFER_PIO)
- return HWIF(drive)->ide_dma_on(drive);
+ return 0;
- return HWIF(drive)->ide_dma_off_quietly(drive);
+ return -1;
}
static int auide_dma_test_irq(ide_drive_t *drive)
@@ -447,27 +438,24 @@
return 0;
}
-static int auide_dma_host_on(ide_drive_t *drive)
+static void auide_dma_host_on(ide_drive_t *drive)
{
- return 0;
}
static int auide_dma_on(ide_drive_t *drive)
{
drive->using_dma = 1;
- return auide_dma_host_on(drive);
-}
-
-static int auide_dma_host_off(ide_drive_t *drive)
-{
return 0;
}
-static int auide_dma_off_quietly(ide_drive_t *drive)
+static void auide_dma_host_off(ide_drive_t *drive)
+{
+}
+
+static void auide_dma_off_quietly(ide_drive_t *drive)
{
drive->using_dma = 0;
- return auide_dma_host_off(drive);
}
static int auide_dma_lostirq(ide_drive_t *drive)
@@ -717,7 +705,8 @@
/* hold should be on in all cases */
hwif->hold = 1;
- hwif->mmio = 2;
+
+ hwif->mmio = 1;
/* If the user has selected DDMA assisted copies,
then set up a few local I/O function entry points
@@ -732,7 +721,7 @@
hwif->speedproc = &auide_tune_chipset;
#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
- hwif->ide_dma_off_quietly = &auide_dma_off_quietly;
+ hwif->dma_off_quietly = &auide_dma_off_quietly;
hwif->ide_dma_timeout = &auide_dma_timeout;
hwif->ide_dma_check = &auide_dma_check;
@@ -741,8 +730,8 @@
hwif->ide_dma_end = &auide_dma_end;
hwif->dma_setup = &auide_dma_setup;
hwif->ide_dma_test_irq = &auide_dma_test_irq;
- hwif->ide_dma_host_off = &auide_dma_host_off;
- hwif->ide_dma_host_on = &auide_dma_host_on;
+ hwif->dma_host_off = &auide_dma_host_off;
+ hwif->dma_host_on = &auide_dma_host_on;
hwif->ide_dma_lostirq = &auide_dma_lostirq;
hwif->ide_dma_on = &auide_dma_on;
diff --git a/drivers/ide/mips/swarm.c b/drivers/ide/mips/swarm.c
index 09c9e79..81fa068 100644
--- a/drivers/ide/mips/swarm.c
+++ b/drivers/ide/mips/swarm.c
@@ -115,7 +115,7 @@
/* Setup MMIO ops. */
default_hwif_mmiops(hwif);
/* Prevent resource map manipulation. */
- hwif->mmio = 2;
+ hwif->mmio = 1;
hwif->noprobe = 0;
for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++)
diff --git a/drivers/ide/pci/aec62xx.c b/drivers/ide/pci/aec62xx.c
index d261bfb..990eafe 100644
--- a/drivers/ide/pci/aec62xx.c
+++ b/drivers/ide/pci/aec62xx.c
@@ -94,9 +94,9 @@
switch(hwif->pci_dev->device) {
case PCI_DEVICE_ID_ARTOP_ATP865:
case PCI_DEVICE_ID_ARTOP_ATP865R:
- mode = (hwif->INB(((hwif->channel) ?
- hwif->mate->dma_status :
- hwif->dma_status)) & 0x10) ? 4 : 3;
+ mode = (inb(hwif->channel ?
+ hwif->mate->dma_status :
+ hwif->dma_status) & 0x10) ? 4 : 3;
break;
case PCI_DEVICE_ID_ARTOP_ATP860:
case PCI_DEVICE_ID_ARTOP_ATP860R:
@@ -209,25 +209,13 @@
static int aec62xx_config_drive_xfer_rate (ide_drive_t *drive)
{
- ide_hwif_t *hwif = HWIF(drive);
- struct hd_driveid *id = drive->id;
+ if (ide_use_dma(drive) && config_chipset_for_dma(drive))
+ return 0;
- if ((id->capability & 1) && drive->autodma) {
-
- if (ide_use_dma(drive)) {
- if (config_chipset_for_dma(drive))
- return hwif->ide_dma_on(drive);
- }
-
- goto fast_ata_pio;
-
- } else if ((id->capability & 8) || (id->field_valid & 2)) {
-fast_ata_pio:
+ if (ide_use_fast_pio(drive))
aec62xx_tune_drive(drive, 5);
- return hwif->ide_dma_off_quietly(drive);
- }
- /* IORDY not supported */
- return 0;
+
+ return -1;
}
static int aec62xx_irq_timeout (ide_drive_t *drive)
@@ -286,10 +274,8 @@
hwif->tuneproc = &aec62xx_tune_drive;
hwif->speedproc = &aec62xx_tune_chipset;
- if (hwif->pci_dev->device == PCI_DEVICE_ID_ARTOP_ATP850UF) {
+ if (hwif->pci_dev->device == PCI_DEVICE_ID_ARTOP_ATP850UF)
hwif->serialized = hwif->channel;
- hwif->no_dsc = 1;
- }
if (hwif->mate)
hwif->mate->serialized = hwif->serialized;
diff --git a/drivers/ide/pci/alim15x3.c b/drivers/ide/pci/alim15x3.c
index 68df77e..4debd18 100644
--- a/drivers/ide/pci/alim15x3.c
+++ b/drivers/ide/pci/alim15x3.c
@@ -507,17 +507,15 @@
*
* Configure a drive for DMA operation. If DMA is not possible we
* drop the drive into PIO mode instead.
- *
- * FIXME: exactly what are we trying to return here
*/
-
+
static int ali15x3_config_drive_for_dma(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
struct hd_driveid *id = drive->id;
if ((m5229_revision<=0x20) && (drive->media!=ide_disk))
- return hwif->ide_dma_off_quietly(drive);
+ goto no_dma_set;
drive->init_speed = 0;
@@ -552,9 +550,10 @@
ata_pio:
hwif->tuneproc(drive, 255);
no_dma_set:
- return hwif->ide_dma_off_quietly(drive);
+ return -1;
}
- return hwif->ide_dma_on(drive);
+
+ return 0;
}
/**
@@ -852,8 +851,8 @@
{
if (m5229_revision < 0x20)
return;
- if (!(hwif->channel))
- hwif->OUTB(hwif->INB(dmabase+2) & 0x60, dmabase+2);
+ if (!hwif->channel)
+ outb(inb(dmabase + 2) & 0x60, dmabase + 2);
ide_setup_dma(hwif, dmabase, 8);
}
diff --git a/drivers/ide/pci/amd74xx.c b/drivers/ide/pci/amd74xx.c
index a433699..7989bdd 100644
--- a/drivers/ide/pci/amd74xx.c
+++ b/drivers/ide/pci/amd74xx.c
@@ -304,8 +304,9 @@
amd_set_drive(drive, speed);
if (drive->autodma && (speed & XFER_MODE) != XFER_PIO)
- return HWIF(drive)->ide_dma_on(drive);
- return HWIF(drive)->ide_dma_off_quietly(drive);
+ return 0;
+
+ return -1;
}
/*
diff --git a/drivers/ide/pci/atiixp.c b/drivers/ide/pci/atiixp.c
index 982ac31..2d48af3 100644
--- a/drivers/ide/pci/atiixp.c
+++ b/drivers/ide/pci/atiixp.c
@@ -101,7 +101,7 @@
}
}
-static int atiixp_ide_dma_host_on(ide_drive_t *drive)
+static void atiixp_dma_host_on(ide_drive_t *drive)
{
struct pci_dev *dev = drive->hwif->pci_dev;
unsigned long flags;
@@ -118,10 +118,10 @@
spin_unlock_irqrestore(&atiixp_lock, flags);
- return __ide_dma_host_on(drive);
+ ide_dma_host_on(drive);
}
-static int atiixp_ide_dma_host_off(ide_drive_t *drive)
+static void atiixp_dma_host_off(ide_drive_t *drive)
{
struct pci_dev *dev = drive->hwif->pci_dev;
unsigned long flags;
@@ -135,7 +135,7 @@
spin_unlock_irqrestore(&atiixp_lock, flags);
- return __ide_dma_host_off(drive);
+ ide_dma_host_off(drive);
}
/**
@@ -235,11 +235,8 @@
{
u8 speed = ide_dma_speed(drive, atiixp_ratemask(drive));
- /* If no DMA speed was available then disable DMA and use PIO. */
- if (!speed) {
- u8 tspeed = ide_get_best_pio_mode(drive, 255, 5, NULL);
- speed = atiixp_dma_2_pio(XFER_PIO_0 + tspeed) + XFER_PIO_0;
- }
+ if (!speed)
+ return 0;
(void) atiixp_speedproc(drive, speed);
return ide_dma_enable(drive);
@@ -255,30 +252,20 @@
static int atiixp_dma_check(ide_drive_t *drive)
{
- ide_hwif_t *hwif = HWIF(drive);
- struct hd_driveid *id = drive->id;
u8 tspeed, speed;
drive->init_speed = 0;
- if ((id->capability & 1) && drive->autodma) {
+ if (ide_use_dma(drive) && atiixp_config_drive_for_dma(drive))
+ return 0;
- if (ide_use_dma(drive)) {
- if (atiixp_config_drive_for_dma(drive))
- return hwif->ide_dma_on(drive);
- }
-
- goto fast_ata_pio;
-
- } else if ((id->capability & 8) || (id->field_valid & 2)) {
-fast_ata_pio:
+ if (ide_use_fast_pio(drive)) {
tspeed = ide_get_best_pio_mode(drive, 255, 5, NULL);
speed = atiixp_dma_2_pio(XFER_PIO_0 + tspeed) + XFER_PIO_0;
- hwif->speedproc(drive, speed);
- return hwif->ide_dma_off_quietly(drive);
+ atiixp_speedproc(drive, speed);
}
- /* IORDY not supported */
- return 0;
+
+ return -1;
}
/**
@@ -318,8 +305,8 @@
else
hwif->udma_four = 0;
- hwif->ide_dma_host_on = &atiixp_ide_dma_host_on;
- hwif->ide_dma_host_off = &atiixp_ide_dma_host_off;
+ hwif->dma_host_on = &atiixp_dma_host_on;
+ hwif->dma_host_off = &atiixp_dma_host_off;
hwif->ide_dma_check = &atiixp_dma_check;
if (!noautodma)
hwif->autodma = 1;
diff --git a/drivers/ide/pci/cmd64x.c b/drivers/ide/pci/cmd64x.c
index aee947e..49df275 100644
--- a/drivers/ide/pci/cmd64x.c
+++ b/drivers/ide/pci/cmd64x.c
@@ -466,36 +466,21 @@
if (!speed)
return 0;
- if(ide_set_xfer_rate(drive, speed))
- return 0;
-
- if (!drive->init_speed)
- drive->init_speed = speed;
+ if (cmd64x_tune_chipset(drive, speed))
+ return 0;
return ide_dma_enable(drive);
}
static int cmd64x_config_drive_for_dma (ide_drive_t *drive)
{
- ide_hwif_t *hwif = HWIF(drive);
- struct hd_driveid *id = drive->id;
+ if (ide_use_dma(drive) && config_chipset_for_dma(drive))
+ return 0;
- if ((id != NULL) && ((id->capability & 1) != 0) && drive->autodma) {
-
- if (ide_use_dma(drive)) {
- if (config_chipset_for_dma(drive))
- return hwif->ide_dma_on(drive);
- }
-
- goto fast_ata_pio;
-
- } else if ((id->capability & 8) || (id->field_valid & 2)) {
-fast_ata_pio:
+ if (ide_use_fast_pio(drive))
config_chipset_for_pio(drive, 1);
- return hwif->ide_dma_off_quietly(drive);
- }
- /* IORDY not supported */
- return 0;
+
+ return -1;
}
static int cmd64x_alt_dma_status (struct pci_dev *dev)
@@ -518,13 +503,13 @@
drive->waiting_for_dma = 0;
/* read DMA command state */
- dma_cmd = hwif->INB(hwif->dma_command);
+ dma_cmd = inb(hwif->dma_command);
/* stop DMA */
- hwif->OUTB((dma_cmd & ~1), hwif->dma_command);
+ outb(dma_cmd & ~1, hwif->dma_command);
/* get DMA status */
- dma_stat = hwif->INB(hwif->dma_status);
+ dma_stat = inb(hwif->dma_status);
/* clear the INTR & ERROR bits */
- hwif->OUTB(dma_stat|6, hwif->dma_status);
+ outb(dma_stat | 6, hwif->dma_status);
if (cmd64x_alt_dma_status(dev)) {
u8 dma_intr = 0;
u8 dma_mask = (hwif->channel) ? ARTTIM23_INTR_CH1 :
@@ -546,7 +531,7 @@
struct pci_dev *dev = hwif->pci_dev;
u8 dma_alt_stat = 0, mask = (hwif->channel) ? MRDMODE_INTR_CH1 :
MRDMODE_INTR_CH0;
- u8 dma_stat = hwif->INB(hwif->dma_status);
+ u8 dma_stat = inb(hwif->dma_status);
(void) pci_read_config_byte(dev, MRDMODE, &dma_alt_stat);
#ifdef DEBUG
@@ -576,13 +561,13 @@
drive->waiting_for_dma = 0;
/* get DMA status */
- dma_stat = hwif->INB(hwif->dma_status);
+ dma_stat = inb(hwif->dma_status);
/* read DMA command state */
- dma_cmd = hwif->INB(hwif->dma_command);
+ dma_cmd = inb(hwif->dma_command);
/* stop DMA */
- hwif->OUTB((dma_cmd & ~1), hwif->dma_command);
+ outb(dma_cmd & ~1, hwif->dma_command);
/* clear the INTR & ERROR bits */
- hwif->OUTB(dma_stat|6, hwif->dma_status);
+ outb(dma_stat | 6, hwif->dma_status);
/* and free any DMA resources */
ide_destroy_dmatable(drive);
/* verify good DMA status */
diff --git a/drivers/ide/pci/cs5520.c b/drivers/ide/pci/cs5520.c
index ba6786a..400859a 100644
--- a/drivers/ide/pci/cs5520.c
+++ b/drivers/ide/pci/cs5520.c
@@ -132,12 +132,11 @@
static int cs5520_config_drive_xfer_rate(ide_drive_t *drive)
{
- ide_hwif_t *hwif = HWIF(drive);
-
/* Tune the drive for PIO modes up to PIO 4 */
cs5520_tune_drive(drive, 4);
+
/* Then tell the core to use DMA operations */
- return hwif->ide_dma_on(drive);
+ return 0;
}
/*
diff --git a/drivers/ide/pci/cs5530.c b/drivers/ide/pci/cs5530.c
index 9bf5fdf..b2d7c13 100644
--- a/drivers/ide/pci/cs5530.c
+++ b/drivers/ide/pci/cs5530.c
@@ -81,8 +81,8 @@
pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
if (!cs5530_set_xfer_mode(drive, modes[pio])) {
- format = (hwif->INL(basereg+4) >> 31) & 1;
- hwif->OUTL(cs5530_pio_timings[format][pio],
+ format = (inl(basereg + 4) >> 31) & 1;
+ outl(cs5530_pio_timings[format][pio],
basereg+(drive->select.b.unit<<3));
}
}
@@ -103,16 +103,13 @@
int unit = drive->select.b.unit;
ide_drive_t *mate = &hwif->drives[unit^1];
struct hd_driveid *id = drive->id;
- unsigned int reg, timings;
+ unsigned int reg, timings = 0;
unsigned long basereg;
/*
* Default to DMA-off in case we run into trouble here.
*/
- hwif->ide_dma_off_quietly(drive);
- /* turn off DMA while we fiddle */
- hwif->ide_dma_host_off(drive);
- /* clear DMA_capable bit */
+ hwif->dma_off_quietly(drive);
/*
* The CS5530 specifies that two drives sharing a cable cannot
@@ -182,30 +179,24 @@
case XFER_MW_DMA_1: timings = 0x00012121; break;
case XFER_MW_DMA_2: timings = 0x00002020; break;
default:
- printk(KERN_ERR "%s: cs5530_config_dma: huh? mode=%02x\n",
- drive->name, mode);
- return 1; /* failure */
+ BUG();
+ break;
}
basereg = CS5530_BASEREG(hwif);
- reg = hwif->INL(basereg+4); /* get drive0 config register */
+ reg = inl(basereg + 4); /* get drive0 config register */
timings |= reg & 0x80000000; /* preserve PIO format bit */
if (unit == 0) { /* are we configuring drive0? */
- hwif->OUTL(timings, basereg+4); /* write drive0 config register */
+ outl(timings, basereg + 4); /* write drive0 config register */
} else {
if (timings & 0x00100000)
reg |= 0x00100000; /* enable UDMA timings for both drives */
else
reg &= ~0x00100000; /* disable UDMA timings for both drives */
- hwif->OUTL(reg, basereg+4); /* write drive0 config register */
- hwif->OUTL(timings, basereg+12); /* write drive1 config register */
+ outl(reg, basereg + 4); /* write drive0 config register */
+ outl(timings, basereg + 12); /* write drive1 config register */
}
- (void) hwif->ide_dma_host_on(drive);
- /* set DMA_capable bit */
- /*
- * Finally, turn DMA on in software, and exit.
- */
- return hwif->ide_dma_on(drive); /* success */
+ return 0; /* success */
}
/**
@@ -321,17 +312,17 @@
hwif->tuneproc = &cs5530_tuneproc;
basereg = CS5530_BASEREG(hwif);
- d0_timings = hwif->INL(basereg+0);
+ d0_timings = inl(basereg + 0);
if (CS5530_BAD_PIO(d0_timings)) {
/* PIO timings not initialized? */
- hwif->OUTL(cs5530_pio_timings[(d0_timings>>31)&1][0], basereg+0);
+ outl(cs5530_pio_timings[(d0_timings >> 31) & 1][0], basereg + 0);
if (!hwif->drives[0].autotune)
hwif->drives[0].autotune = 1;
/* needs autotuning later */
}
- if (CS5530_BAD_PIO(hwif->INL(basereg+8))) {
- /* PIO timings not initialized? */
- hwif->OUTL(cs5530_pio_timings[(d0_timings>>31)&1][0], basereg+8);
+ if (CS5530_BAD_PIO(inl(basereg + 8))) {
+ /* PIO timings not initialized? */
+ outl(cs5530_pio_timings[(d0_timings >> 31) & 1][0], basereg + 8);
if (!hwif->drives[1].autotune)
hwif->drives[1].autotune = 1;
/* needs autotuning later */
diff --git a/drivers/ide/pci/cs5535.c b/drivers/ide/pci/cs5535.c
index 5c5aec2..45f43ef 100644
--- a/drivers/ide/pci/cs5535.c
+++ b/drivers/ide/pci/cs5535.c
@@ -195,28 +195,19 @@
static int cs5535_dma_check(ide_drive_t *drive)
{
- ide_hwif_t *hwif = drive->hwif;
- struct hd_driveid *id = drive->id;
u8 speed;
drive->init_speed = 0;
- if ((id->capability & 1) && drive->autodma) {
- if (ide_use_dma(drive)) {
- if (cs5535_config_drive_for_dma(drive))
- return hwif->ide_dma_on(drive);
- }
+ if (ide_use_dma(drive) && cs5535_config_drive_for_dma(drive))
+ return 0;
- goto fast_ata_pio;
-
- } else if ((id->capability & 8) || (id->field_valid & 2)) {
-fast_ata_pio:
+ if (ide_use_fast_pio(drive)) {
speed = ide_get_best_pio_mode(drive, 255, 4, NULL);
cs5535_set_drive(drive, speed);
- return hwif->ide_dma_off_quietly(drive);
}
- /* IORDY not supported */
- return 0;
+
+ return -1;
}
static u8 __devinit cs5535_cable_detect(struct pci_dev *dev)
diff --git a/drivers/ide/pci/cy82c693.c b/drivers/ide/pci/cy82c693.c
index 9eafcbf..103b9db 100644
--- a/drivers/ide/pci/cy82c693.c
+++ b/drivers/ide/pci/cy82c693.c
@@ -197,8 +197,8 @@
#if CY82C693_DEBUG_LOGS
/* for debug let's show the previous values */
- HWIF(drive)->OUTB(index, CY82_INDEX_PORT);
- data = HWIF(drive)->INB(CY82_DATA_PORT);
+ outb(index, CY82_INDEX_PORT);
+ data = inb(CY82_DATA_PORT);
printk (KERN_INFO "%s (ch=%d, dev=%d): DMA mode is %d (single=%d)\n",
drive->name, HWIF(drive)->channel, drive->select.b.unit,
@@ -207,8 +207,8 @@
data = (u8)mode|(u8)(single<<2);
- HWIF(drive)->OUTB(index, CY82_INDEX_PORT);
- HWIF(drive)->OUTB(data, CY82_DATA_PORT);
+ outb(index, CY82_INDEX_PORT);
+ outb(data, CY82_DATA_PORT);
#if CY82C693_DEBUG_INFO
printk(KERN_INFO "%s (ch=%d, dev=%d): set DMA mode to %d (single=%d)\n",
@@ -227,8 +227,8 @@
*/
data = BUSMASTER_TIMEOUT;
- HWIF(drive)->OUTB(CY82_INDEX_TIMEOUT, CY82_INDEX_PORT);
- HWIF(drive)->OUTB(data, CY82_DATA_PORT);
+ outb(CY82_INDEX_TIMEOUT, CY82_INDEX_PORT);
+ outb(data, CY82_DATA_PORT);
#if CY82C693_DEBUG_INFO
printk (KERN_INFO "%s: Set IDE Bus Master TimeOut Register to 0x%X\n",
@@ -478,21 +478,18 @@
}
}
-static ide_pci_device_t cy82c693_chipsets[] __devinitdata = {
- { /* 0 */
- .name = "CY82C693",
- .init_chipset = init_chipset_cy82c693,
- .init_iops = init_iops_cy82c693,
- .init_hwif = init_hwif_cy82c693,
- .channels = 1,
- .autodma = AUTODMA,
- .bootable = ON_BOARD,
- }
+static ide_pci_device_t cy82c693_chipset __devinitdata = {
+ .name = "CY82C693",
+ .init_chipset = init_chipset_cy82c693,
+ .init_iops = init_iops_cy82c693,
+ .init_hwif = init_hwif_cy82c693,
+ .channels = 1,
+ .autodma = AUTODMA,
+ .bootable = ON_BOARD,
};
static int __devinit cy82c693_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
- ide_pci_device_t *d = &cy82c693_chipsets[id->driver_data];
struct pci_dev *dev2;
int ret = -ENODEV;
@@ -501,7 +498,7 @@
if ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE &&
PCI_FUNC(dev->devfn) == 1) {
dev2 = pci_get_slot(dev->bus, dev->devfn + 1);
- ret = ide_setup_pci_devices(dev, dev2, d);
+ ret = ide_setup_pci_devices(dev, dev2, &cy82c693_chipset);
/* We leak pci refs here but thats ok - we can't be unloaded */
}
return ret;
diff --git a/drivers/ide/pci/hpt34x.c b/drivers/ide/pci/hpt34x.c
index ce7b08f..924eaa3 100644
--- a/drivers/ide/pci/hpt34x.c
+++ b/drivers/ide/pci/hpt34x.c
@@ -48,19 +48,6 @@
return 1;
}
-static void hpt34x_clear_chipset (ide_drive_t *drive)
-{
- struct pci_dev *dev = HWIF(drive)->pci_dev;
- u32 reg1 = 0, tmp1 = 0, reg2 = 0, tmp2 = 0;
-
- pci_read_config_dword(dev, 0x44, ®1);
- pci_read_config_dword(dev, 0x48, ®2);
- tmp1 = ((0x00 << (3*drive->dn)) | (reg1 & ~(7 << (3*drive->dn))));
- tmp2 = (reg2 & ~(0x11 << drive->dn));
- pci_write_config_dword(dev, 0x44, tmp1);
- pci_write_config_dword(dev, 0x48, tmp2);
-}
-
static int hpt34x_tune_chipset (ide_drive_t *drive, u8 xferspeed)
{
struct pci_dev *dev = HWIF(drive)->pci_dev;
@@ -81,7 +68,7 @@
pci_read_config_dword(dev, 0x44, ®1);
pci_read_config_dword(dev, 0x48, ®2);
tmp1 = ((lo_speed << (3*drive->dn)) | (reg1 & ~(7 << (3*drive->dn))));
- tmp2 = ((hi_speed << drive->dn) | reg2);
+ tmp2 = ((hi_speed << drive->dn) | (reg2 & ~(0x11 << drive->dn)));
pci_write_config_dword(dev, 0x44, tmp1);
pci_write_config_dword(dev, 0x48, tmp2);
@@ -99,7 +86,6 @@
static void hpt34x_tune_drive (ide_drive_t *drive, u8 pio)
{
pio = ide_get_best_pio_mode(drive, pio, 5, NULL);
- hpt34x_clear_chipset(drive);
(void) hpt34x_tune_chipset(drive, (XFER_PIO_0 + pio));
}
@@ -117,38 +103,25 @@
if (!(speed))
return 0;
- hpt34x_clear_chipset(drive);
(void) hpt34x_tune_chipset(drive, speed);
return ide_dma_enable(drive);
}
static int hpt34x_config_drive_xfer_rate (ide_drive_t *drive)
{
- ide_hwif_t *hwif = HWIF(drive);
- struct hd_driveid *id = drive->id;
-
drive->init_speed = 0;
- if (id && (id->capability & 1) && drive->autodma) {
-
- if (ide_use_dma(drive)) {
- if (config_chipset_for_dma(drive))
+ if (ide_use_dma(drive) && config_chipset_for_dma(drive))
#ifndef CONFIG_HPT34X_AUTODMA
- return hwif->ide_dma_off_quietly(drive);
+ return -1;
#else
- return hwif->ide_dma_on(drive);
+ return 0;
#endif
- }
- goto fast_ata_pio;
-
- } else if ((id->capability & 8) || (id->field_valid & 2)) {
-fast_ata_pio:
+ if (ide_use_fast_pio(drive))
hpt34x_tune_drive(drive, 255);
- return hwif->ide_dma_off_quietly(drive);
- }
- /* IORDY not supported */
- return 0;
+
+ return -1;
}
/*
@@ -209,7 +182,6 @@
hwif->tuneproc = &hpt34x_tune_drive;
hwif->speedproc = &hpt34x_tune_chipset;
- hwif->no_dsc = 1;
hwif->drives[0].autotune = 1;
hwif->drives[1].autotune = 1;
diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c
index 05be8fa..60ecdc2 100644
--- a/drivers/ide/pci/hpt366.c
+++ b/drivers/ide/pci/hpt366.c
@@ -736,24 +736,15 @@
static int hpt366_config_drive_xfer_rate(ide_drive_t *drive)
{
- ide_hwif_t *hwif = HWIF(drive);
- struct hd_driveid *id = drive->id;
-
drive->init_speed = 0;
- if ((id->capability & 1) && drive->autodma) {
- if (ide_use_dma(drive) && config_chipset_for_dma(drive))
- return hwif->ide_dma_on(drive);
+ if (ide_use_dma(drive) && config_chipset_for_dma(drive))
+ return 0;
- goto fast_ata_pio;
-
- } else if ((id->capability & 8) || (id->field_valid & 2)) {
-fast_ata_pio:
+ if (ide_use_fast_pio(drive))
hpt3xx_tune_drive(drive, 255);
- return hwif->ide_dma_off_quietly(drive);
- }
- /* IORDY not supported */
- return 0;
+
+ return -1;
}
/*
@@ -841,7 +832,7 @@
return 0;
}
- dma_stat = hwif->INB(hwif->dma_status);
+ dma_stat = inb(hwif->dma_status);
/* return 1 if INTR asserted */
if (dma_stat & 4)
return 1;
@@ -1391,9 +1382,6 @@
u8 dma_new = 0, dma_old = 0;
unsigned long flags;
- if (!dmabase)
- return;
-
dma_old = hwif->INB(dmabase + 2);
local_irq_save(flags);
diff --git a/drivers/ide/pci/it8213.c b/drivers/ide/pci/it8213.c
index 63248b6..424f00b 100644
--- a/drivers/ide/pci/it8213.c
+++ b/drivers/ide/pci/it8213.c
@@ -244,17 +244,15 @@
static int it8213_config_drive_for_dma (ide_drive_t *drive)
{
- ide_hwif_t *hwif = drive->hwif;
+ u8 pio;
- if (ide_use_dma(drive)) {
- if (config_chipset_for_dma(drive))
- return hwif->ide_dma_on(drive);
- }
+ if (ide_use_dma(drive) && config_chipset_for_dma(drive))
+ return 0;
- hwif->speedproc(drive, XFER_PIO_0
- + ide_get_best_pio_mode(drive, 255, 4, NULL));
+ pio = ide_get_best_pio_mode(drive, 255, 4, NULL);
+ it8213_tune_chipset(drive, XFER_PIO_0 + pio);
- return hwif->ide_dma_off_quietly(drive);
+ return -1;
}
/**
diff --git a/drivers/ide/pci/it821x.c b/drivers/ide/pci/it821x.c
index e9bad18..a132767 100644
--- a/drivers/ide/pci/it821x.c
+++ b/drivers/ide/pci/it821x.c
@@ -520,14 +520,12 @@
static int it821x_config_drive_for_dma (ide_drive_t *drive)
{
- ide_hwif_t *hwif = drive->hwif;
+ if (ide_use_dma(drive) && config_chipset_for_dma(drive))
+ return 0;
- if (ide_use_dma(drive)) {
- if (config_chipset_for_dma(drive))
- return hwif->ide_dma_on(drive);
- }
config_it821x_chipset_for_pio(drive, 1);
- return hwif->ide_dma_off_quietly(drive);
+
+ return -1;
}
/**
@@ -608,11 +606,11 @@
printk(".\n");
/* Now the core code will have wrongly decided no DMA
so we need to fix this */
- hwif->ide_dma_off_quietly(drive);
+ hwif->dma_off_quietly(drive);
#ifdef CONFIG_IDEDMA_ONLYDISK
if (drive->media == ide_disk)
#endif
- hwif->ide_dma_check(drive);
+ ide_set_dma(drive);
} else {
/* Non RAID volume. Fixups to stop the core code
doing unsupported things */
diff --git a/drivers/ide/pci/jmicron.c b/drivers/ide/pci/jmicron.c
index f07bbbe..53f2550 100644
--- a/drivers/ide/pci/jmicron.c
+++ b/drivers/ide/pci/jmicron.c
@@ -147,7 +147,9 @@
{
u8 speed = ide_dma_speed(drive, jmicron_ratemask(drive));
- config_jmicron_chipset_for_pio(drive, !speed);
+ if (!speed)
+ return 0;
+
jmicron_tune_chipset(drive, speed);
return ide_dma_enable(drive);
}
@@ -162,14 +164,12 @@
static int jmicron_config_drive_for_dma (ide_drive_t *drive)
{
- ide_hwif_t *hwif = drive->hwif;
+ if (ide_use_dma(drive) && config_chipset_for_dma(drive))
+ return 0;
- if (ide_use_dma(drive)) {
- if (config_chipset_for_dma(drive))
- return hwif->ide_dma_on(drive);
- }
config_jmicron_chipset_for_pio(drive, 1);
- return hwif->ide_dma_off_quietly(drive);
+
+ return -1;
}
/**
diff --git a/drivers/ide/pci/ns87415.c b/drivers/ide/pci/ns87415.c
index 8aaea4e..b310c4f 100644
--- a/drivers/ide/pci/ns87415.c
+++ b/drivers/ide/pci/ns87415.c
@@ -166,10 +166,10 @@
/* get dma command mode */
dma_cmd = hwif->INB(hwif->dma_command);
/* stop DMA */
- hwif->OUTB(dma_cmd & ~1, hwif->dma_command);
+ outb(dma_cmd & ~1, hwif->dma_command);
/* from ERRATA: clear the INTR & ERROR bits */
dma_cmd = hwif->INB(hwif->dma_command);
- hwif->OUTB(dma_cmd|6, hwif->dma_command);
+ outb(dma_cmd | 6, hwif->dma_command);
/* and free any DMA resources */
ide_destroy_dmatable(drive);
/* verify good DMA status */
@@ -190,7 +190,8 @@
static int ns87415_ide_dma_check (ide_drive_t *drive)
{
if (drive->media != ide_disk)
- return HWIF(drive)->ide_dma_off_quietly(drive);
+ return -1;
+
return __ide_dma_check(drive);
}
@@ -243,9 +244,9 @@
* to SELECT_DRIVE() properly during first probe_hwif().
*/
timeout = 10000;
- hwif->OUTB(12, hwif->io_ports[IDE_CONTROL_OFFSET]);
+ outb(12, hwif->io_ports[IDE_CONTROL_OFFSET]);
udelay(10);
- hwif->OUTB(8, hwif->io_ports[IDE_CONTROL_OFFSET]);
+ outb(8, hwif->io_ports[IDE_CONTROL_OFFSET]);
do {
udelay(50);
stat = hwif->INB(hwif->io_ports[IDE_STATUS_OFFSET]);
@@ -263,7 +264,7 @@
if (!hwif->dma_base)
return;
- hwif->OUTB(0x60, hwif->dma_status);
+ outb(0x60, hwif->dma_status);
hwif->dma_setup = &ns87415_ide_dma_setup;
hwif->ide_dma_check = &ns87415_ide_dma_check;
hwif->ide_dma_end = &ns87415_ide_dma_end;
diff --git a/drivers/ide/pci/opti621.c b/drivers/ide/pci/opti621.c
index 22bbf61..9ca60dd 100644
--- a/drivers/ide/pci/opti621.c
+++ b/drivers/ide/pci/opti621.c
@@ -176,34 +176,35 @@
return ((time*bus_speed+999)/1000);
}
-static void write_reg(ide_hwif_t *hwif, u8 value, int reg)
/* Write value to register reg, base of register
* is at reg_base (0x1f0 primary, 0x170 secondary,
* if not changed by PCI configuration).
* This is from setupvic.exe program.
*/
+static void write_reg(u8 value, int reg)
{
- hwif->INW(reg_base+1);
- hwif->INW(reg_base+1);
- hwif->OUTB(3, reg_base+2);
- hwif->OUTB(value, reg_base+reg);
- hwif->OUTB(0x83, reg_base+2);
+ inw(reg_base + 1);
+ inw(reg_base + 1);
+ outb(3, reg_base + 2);
+ outb(value, reg_base + reg);
+ outb(0x83, reg_base + 2);
}
-static u8 read_reg(ide_hwif_t *hwif, int reg)
/* Read value from register reg, base of register
* is at reg_base (0x1f0 primary, 0x170 secondary,
* if not changed by PCI configuration).
* This is from setupvic.exe program.
*/
+static u8 read_reg(int reg)
{
u8 ret = 0;
- hwif->INW(reg_base+1);
- hwif->INW(reg_base+1);
- hwif->OUTB(3, reg_base+2);
- ret = hwif->INB(reg_base+reg);
- hwif->OUTB(0x83, reg_base+2);
+ inw(reg_base + 1);
+ inw(reg_base + 1);
+ outb(3, reg_base + 2);
+ ret = inb(reg_base + reg);
+ outb(0x83, reg_base + 2);
+
return ret;
}
@@ -286,39 +287,39 @@
reg_base = hwif->io_ports[IDE_DATA_OFFSET];
/* allow Register-B */
- hwif->OUTB(0xc0, reg_base+CNTRL_REG);
+ outb(0xc0, reg_base + CNTRL_REG);
/* hmm, setupvic.exe does this ;-) */
- hwif->OUTB(0xff, reg_base+5);
+ outb(0xff, reg_base + 5);
/* if reads 0xff, adapter not exist? */
- (void) hwif->INB(reg_base+CNTRL_REG);
+ (void)inb(reg_base + CNTRL_REG);
/* if reads 0xc0, no interface exist? */
- read_reg(hwif, CNTRL_REG);
+ read_reg(CNTRL_REG);
/* read version, probably 0 */
- read_reg(hwif, STRAP_REG);
+ read_reg(STRAP_REG);
/* program primary drive */
- /* select Index-0 for Register-A */
- write_reg(hwif, 0, MISC_REG);
- /* set read cycle timings */
- write_reg(hwif, cycle1, READ_REG);
- /* set write cycle timings */
- write_reg(hwif, cycle1, WRITE_REG);
+ /* select Index-0 for Register-A */
+ write_reg(0, MISC_REG);
+ /* set read cycle timings */
+ write_reg(cycle1, READ_REG);
+ /* set write cycle timings */
+ write_reg(cycle1, WRITE_REG);
/* program secondary drive */
- /* select Index-1 for Register-B */
- write_reg(hwif, 1, MISC_REG);
- /* set read cycle timings */
- write_reg(hwif, cycle2, READ_REG);
- /* set write cycle timings */
- write_reg(hwif, cycle2, WRITE_REG);
+ /* select Index-1 for Register-B */
+ write_reg(1, MISC_REG);
+ /* set read cycle timings */
+ write_reg(cycle2, READ_REG);
+ /* set write cycle timings */
+ write_reg(cycle2, WRITE_REG);
/* use Register-A for drive 0 */
/* use Register-B for drive 1 */
- write_reg(hwif, 0x85, CNTRL_REG);
+ write_reg(0x85, CNTRL_REG);
/* set address setup, DRDY timings, */
/* and read prefetch for both drives */
- write_reg(hwif, misc, MISC_REG);
+ write_reg(misc, MISC_REG);
spin_unlock_irqrestore(&ide_lock, flags);
}
diff --git a/drivers/ide/pci/pdc202xx_new.c b/drivers/ide/pci/pdc202xx_new.c
index 236a031..6ceb25b 100644
--- a/drivers/ide/pci/pdc202xx_new.c
+++ b/drivers/ide/pci/pdc202xx_new.c
@@ -101,8 +101,8 @@
{
u8 value;
- hwif->OUTB(index, hwif->dma_vendor1);
- value = hwif->INB(hwif->dma_vendor3);
+ outb(index, hwif->dma_vendor1);
+ value = inb(hwif->dma_vendor3);
DBG("index[%02X] value[%02X]\n", index, value);
return value;
@@ -115,8 +115,8 @@
*/
static void set_indexed_reg(ide_hwif_t *hwif, u8 index, u8 value)
{
- hwif->OUTB(index, hwif->dma_vendor1);
- hwif->OUTB(value, hwif->dma_vendor3);
+ outb(index, hwif->dma_vendor1);
+ outb(value, hwif->dma_vendor3);
DBG("index[%02X] value[%02X]\n", index, value);
}
@@ -281,25 +281,15 @@
static int pdcnew_config_drive_xfer_rate(ide_drive_t *drive)
{
- ide_hwif_t *hwif = HWIF(drive);
- struct hd_driveid *id = drive->id;
-
drive->init_speed = 0;
- if ((id->capability & 1) && drive->autodma) {
+ if (ide_use_dma(drive) && config_chipset_for_dma(drive))
+ return 0;
- if (ide_use_dma(drive) && config_chipset_for_dma(drive))
- return hwif->ide_dma_on(drive);
+ if (ide_use_fast_pio(drive))
+ pdcnew_tune_drive(drive, 255);
- goto fast_ata_pio;
-
- } else if ((id->capability & 8) || (id->field_valid & 2)) {
-fast_ata_pio:
- hwif->tuneproc(drive, 255);
- return hwif->ide_dma_off_quietly(drive);
- }
- /* IORDY not supported */
- return 0;
+ return -1;
}
static int pdcnew_quirkproc(ide_drive_t *drive)
diff --git a/drivers/ide/pci/pdc202xx_old.c b/drivers/ide/pci/pdc202xx_old.c
index 730e8d1..a7a639f 100644
--- a/drivers/ide/pci/pdc202xx_old.c
+++ b/drivers/ide/pci/pdc202xx_old.c
@@ -2,6 +2,7 @@
* linux/drivers/ide/pci/pdc202xx_old.c Version 0.36 Sept 11, 2002
*
* Copyright (C) 1998-2002 Andre Hedrick <andre@linux-ide.org>
+ * Copyright (C) 2006-2007 MontaVista Software, Inc.
*
* Promise Ultra33 cards with BIOS v1.20 through 1.28 will need this
* compiled into the kernel if you have more than one card installed.
@@ -216,21 +217,10 @@
}
-/* 0 1 2 3 4 5 6 7 8
- * 960, 480, 390, 300, 240, 180, 120, 90, 60
- * 180, 150, 120, 90, 60
- * DMA_Speed
- * 180, 120, 90, 90, 90, 60, 30
- * 11, 5, 4, 3, 2, 1, 0
- */
-static void config_chipset_for_pio (ide_drive_t *drive, u8 pio)
+static void pdc202xx_tune_drive(ide_drive_t *drive, u8 pio)
{
- u8 speed = 0;
-
- if (pio == 5) pio = 4;
- speed = XFER_PIO_0 + ide_get_best_pio_mode(drive, 255, pio, NULL);
-
- pdc202xx_tune_chipset(drive, speed);
+ pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+ pdc202xx_tune_chipset(drive, XFER_PIO_0 + pio);
}
static u8 pdc202xx_old_cable_detect (ide_hwif_t *hwif)
@@ -250,17 +240,17 @@
static void pdc_old_enable_66MHz_clock(ide_hwif_t *hwif)
{
unsigned long clock_reg = hwif->dma_master + 0x11;
- u8 clock = hwif->INB(clock_reg);
+ u8 clock = inb(clock_reg);
- hwif->OUTB(clock | (hwif->channel ? 0x08 : 0x02), clock_reg);
+ outb(clock | (hwif->channel ? 0x08 : 0x02), clock_reg);
}
static void pdc_old_disable_66MHz_clock(ide_hwif_t *hwif)
{
unsigned long clock_reg = hwif->dma_master + 0x11;
- u8 clock = hwif->INB(clock_reg);
+ u8 clock = inb(clock_reg);
- hwif->OUTB(clock & ~(hwif->channel ? 0x08 : 0x02), clock_reg);
+ outb(clock & ~(hwif->channel ? 0x08 : 0x02), clock_reg);
}
static int config_chipset_for_dma (ide_drive_t *drive)
@@ -332,27 +322,15 @@
static int pdc202xx_config_drive_xfer_rate (ide_drive_t *drive)
{
- ide_hwif_t *hwif = HWIF(drive);
- struct hd_driveid *id = drive->id;
-
drive->init_speed = 0;
- if (id && (id->capability & 1) && drive->autodma) {
+ if (ide_use_dma(drive) && config_chipset_for_dma(drive))
+ return 0;
- if (ide_use_dma(drive)) {
- if (config_chipset_for_dma(drive))
- return hwif->ide_dma_on(drive);
- }
+ if (ide_use_fast_pio(drive))
+ pdc202xx_tune_drive(drive, 255);
- goto fast_ata_pio;
-
- } else if ((id->capability & 8) || (id->field_valid & 2)) {
-fast_ata_pio:
- hwif->tuneproc(drive, 5);
- return hwif->ide_dma_off_quietly(drive);
- }
- /* IORDY not supported */
- return 0;
+ return -1;
}
static int pdc202xx_quirkproc (ide_drive_t *drive)
@@ -375,14 +353,14 @@
unsigned long high_16 = hwif->dma_master;
unsigned long atapi_reg = high_16 + (hwif->channel ? 0x24 : 0x20);
u32 word_count = 0;
- u8 clock = hwif->INB(high_16 + 0x11);
+ u8 clock = inb(high_16 + 0x11);
- hwif->OUTB(clock|(hwif->channel ? 0x08 : 0x02), high_16+0x11);
+ outb(clock | (hwif->channel ? 0x08 : 0x02), high_16 + 0x11);
word_count = (rq->nr_sectors << 8);
word_count = (rq_data_dir(rq) == READ) ?
word_count | 0x05000000 :
word_count | 0x06000000;
- hwif->OUTL(word_count, atapi_reg);
+ outl(word_count, atapi_reg);
}
ide_dma_start(drive);
}
@@ -395,9 +373,9 @@
unsigned long atapi_reg = high_16 + (hwif->channel ? 0x24 : 0x20);
u8 clock = 0;
- hwif->OUTL(0, atapi_reg); /* zero out extra */
- clock = hwif->INB(high_16 + 0x11);
- hwif->OUTB(clock & ~(hwif->channel ? 0x08:0x02), high_16+0x11);
+ outl(0, atapi_reg); /* zero out extra */
+ clock = inb(high_16 + 0x11);
+ outb(clock & ~(hwif->channel ? 0x08:0x02), high_16 + 0x11);
}
if (drive->current_speed > XFER_UDMA_2)
pdc_old_disable_66MHz_clock(drive->hwif);
@@ -408,8 +386,8 @@
{
ide_hwif_t *hwif = HWIF(drive);
unsigned long high_16 = hwif->dma_master;
- u8 dma_stat = hwif->INB(hwif->dma_status);
- u8 sc1d = hwif->INB((high_16 + 0x001d));
+ u8 dma_stat = inb(hwif->dma_status);
+ u8 sc1d = inb(high_16 + 0x001d);
if (hwif->channel) {
/* bit7: Error, bit6: Interrupting, bit5: FIFO Full, bit4: FIFO Empty */
@@ -445,11 +423,11 @@
static void pdc202xx_reset_host (ide_hwif_t *hwif)
{
unsigned long high_16 = hwif->dma_master;
- u8 udma_speed_flag = hwif->INB(high_16|0x001f);
+ u8 udma_speed_flag = inb(high_16 | 0x001f);
- hwif->OUTB((udma_speed_flag | 0x10), (high_16|0x001f));
+ outb(udma_speed_flag | 0x10, high_16 | 0x001f);
mdelay(100);
- hwif->OUTB((udma_speed_flag & ~0x10), (high_16|0x001f));
+ outb(udma_speed_flag & ~0x10, high_16 | 0x001f);
mdelay(2000); /* 2 seconds ?! */
printk(KERN_WARNING "PDC202XX: %s channel reset.\n",
@@ -463,7 +441,7 @@
pdc202xx_reset_host(hwif);
pdc202xx_reset_host(mate);
- hwif->tuneproc(drive, 5);
+ pdc202xx_tune_drive(drive, 255);
}
static unsigned int __devinit init_chipset_pdc202xx(struct pci_dev *dev,
@@ -490,7 +468,7 @@
hwif->rqsize = 256;
hwif->autodma = 0;
- hwif->tuneproc = &config_chipset_for_pio;
+ hwif->tuneproc = &pdc202xx_tune_drive;
hwif->quirkproc = &pdc202xx_quirkproc;
if (hwif->pci_dev->device != PCI_DEVICE_ID_PROMISE_20246)
@@ -537,9 +515,9 @@
return;
}
- udma_speed_flag = hwif->INB((dmabase|0x1f));
- primary_mode = hwif->INB((dmabase|0x1a));
- secondary_mode = hwif->INB((dmabase|0x1b));
+ udma_speed_flag = inb(dmabase | 0x1f);
+ primary_mode = inb(dmabase | 0x1a);
+ secondary_mode = inb(dmabase | 0x1b);
printk(KERN_INFO "%s: (U)DMA Burst Bit %sABLED " \
"Primary %s Mode " \
"Secondary %s Mode.\n", hwif->cds->name,
@@ -552,30 +530,10 @@
printk(KERN_INFO "%s: FORCING BURST BIT 0x%02x->0x%02x ",
hwif->cds->name, udma_speed_flag,
(udma_speed_flag|1));
- hwif->OUTB(udma_speed_flag|1,(dmabase|0x1f));
- printk("%sACTIVE\n",
- (hwif->INB(dmabase|0x1f)&1) ? "":"IN");
+ outb(udma_speed_flag | 1, dmabase | 0x1f);
+ printk("%sACTIVE\n", (inb(dmabase | 0x1f) & 1) ? "" : "IN");
}
#endif /* CONFIG_PDC202XX_BURST */
-#ifdef CONFIG_PDC202XX_MASTER
- if (!(primary_mode & 1)) {
- printk(KERN_INFO "%s: FORCING PRIMARY MODE BIT "
- "0x%02x -> 0x%02x ", hwif->cds->name,
- primary_mode, (primary_mode|1));
- hwif->OUTB(primary_mode|1, (dmabase|0x1a));
- printk("%s\n",
- (hwif->INB((dmabase|0x1a)) & 1) ? "MASTER" : "PCI");
- }
-
- if (!(secondary_mode & 1)) {
- printk(KERN_INFO "%s: FORCING SECONDARY MODE BIT "
- "0x%02x -> 0x%02x ", hwif->cds->name,
- secondary_mode, (secondary_mode|1));
- hwif->OUTB(secondary_mode|1, (dmabase|0x1b));
- printk("%s\n",
- (hwif->INB((dmabase|0x1b)) & 1) ? "MASTER" : "PCI");
- }
-#endif /* CONFIG_PDC202XX_MASTER */
ide_setup_dma(hwif, dmabase, 8);
}
diff --git a/drivers/ide/pci/piix.c b/drivers/ide/pci/piix.c
index 52cfc2a..569822f 100644
--- a/drivers/ide/pci/piix.c
+++ b/drivers/ide/pci/piix.c
@@ -369,7 +369,7 @@
* If no DMA speed was available or the chipset has DMA bugs
* then disable DMA and use PIO
*/
- if (!speed || no_piix_dma)
+ if (!speed)
return 0;
(void) piix_tune_chipset(drive, speed);
@@ -386,41 +386,28 @@
static int piix_config_drive_xfer_rate (ide_drive_t *drive)
{
- ide_hwif_t *hwif = HWIF(drive);
- struct hd_driveid *id = drive->id;
-
drive->init_speed = 0;
- if ((id->capability & 1) && drive->autodma) {
+ if (ide_use_dma(drive) && piix_config_drive_for_dma(drive))
+ return 0;
- if (ide_use_dma(drive) && piix_config_drive_for_dma(drive))
- return hwif->ide_dma_on(drive);
-
- goto fast_ata_pio;
-
- } else if ((id->capability & 8) || (id->field_valid & 2)) {
-fast_ata_pio:
+ if (ide_use_fast_pio(drive))
/* Find best PIO mode. */
- (void) hwif->speedproc(drive, XFER_PIO_0 +
- ide_get_best_pio_mode(drive, 255, 4, NULL));
- return hwif->ide_dma_off_quietly(drive);
- }
- /* IORDY not supported */
- return 0;
+ piix_tune_chipset(drive, XFER_PIO_0 +
+ ide_get_best_pio_mode(drive, 255, 4, NULL));
+
+ return -1;
}
/**
- * init_chipset_piix - set up the PIIX chipset
- * @dev: PCI device to set up
- * @name: Name of the device
+ * piix_is_ichx - check if ICHx
+ * @dev: PCI device to check
*
- * Initialize the PCI device as required. For the PIIX this turns
- * out to be nice and simple
+ * returns 1 if ICHx, 0 otherwise.
*/
-
-static unsigned int __devinit init_chipset_piix (struct pci_dev *dev, const char *name)
+static int piix_is_ichx(struct pci_dev *dev)
{
- switch(dev->device) {
+ switch (dev->device) {
case PCI_DEVICE_ID_INTEL_82801EB_1:
case PCI_DEVICE_ID_INTEL_82801AA_1:
case PCI_DEVICE_ID_INTEL_82801AB_1:
@@ -438,19 +425,61 @@
case PCI_DEVICE_ID_INTEL_ICH7_21:
case PCI_DEVICE_ID_INTEL_ESB2_18:
case PCI_DEVICE_ID_INTEL_ICH8_6:
- {
- unsigned int extra = 0;
- pci_read_config_dword(dev, 0x54, &extra);
- pci_write_config_dword(dev, 0x54, extra|0x400);
- }
- default:
- break;
+ return 1;
}
return 0;
}
/**
+ * init_chipset_piix - set up the PIIX chipset
+ * @dev: PCI device to set up
+ * @name: Name of the device
+ *
+ * Initialize the PCI device as required. For the PIIX this turns
+ * out to be nice and simple
+ */
+
+static unsigned int __devinit init_chipset_piix (struct pci_dev *dev, const char *name)
+{
+ if (piix_is_ichx(dev)) {
+ unsigned int extra = 0;
+ pci_read_config_dword(dev, 0x54, &extra);
+ pci_write_config_dword(dev, 0x54, extra|0x400);
+ }
+
+ return 0;
+}
+
+/**
+ * piix_dma_clear_irq - clear BMDMA status
+ * @drive: IDE drive to clear
+ *
+ * Called from ide_intr() for PIO interrupts
+ * to clear BMDMA status as needed by ICHx
+ */
+static void piix_dma_clear_irq(ide_drive_t *drive)
+{
+ ide_hwif_t *hwif = HWIF(drive);
+ u8 dma_stat;
+
+ /* clear the INTR & ERROR bits */
+ dma_stat = hwif->INB(hwif->dma_status);
+ /* Should we force the bit as well ? */
+ hwif->OUTB(dma_stat, hwif->dma_status);
+}
+
+static int __devinit piix_cable_detect(ide_hwif_t *hwif)
+{
+ struct pci_dev *dev = hwif->pci_dev;
+ u8 reg54h = 0, mask = hwif->channel ? 0xc0 : 0x30;
+
+ pci_read_config_byte(dev, 0x54, ®54h);
+
+ return (reg54h & mask) ? 1 : 0;
+}
+
+/**
* init_hwif_piix - fill in the hwif for the PIIX
* @hwif: IDE interface
*
@@ -460,9 +489,6 @@
static void __devinit init_hwif_piix(ide_hwif_t *hwif)
{
- u8 reg54h = 0, reg55h = 0, ata66 = 0;
- u8 mask = hwif->channel ? 0xc0 : 0x30;
-
#ifndef CONFIG_IA64
if (!hwif->irq)
hwif->irq = hwif->channel ? 15 : 14;
@@ -472,10 +498,6 @@
/* This is a painful system best to let it self tune for now */
return;
}
- /* ESB2 appears to generate spurious DMA interrupts in PIO mode
- when in native mode */
- if (hwif->pci_dev->device == PCI_DEVICE_ID_INTEL_ESB2_18)
- hwif->atapi_irq_bogon = 1;
hwif->autodma = 0;
hwif->tuneproc = &piix_tune_drive;
@@ -486,15 +508,16 @@
if (!hwif->dma_base)
return;
+ /* ICHx need to clear the bmdma status for all interrupts */
+ if (piix_is_ichx(hwif->pci_dev))
+ hwif->ide_dma_clear_irq = &piix_dma_clear_irq;
+
hwif->atapi_dma = 1;
hwif->ultra_mask = 0x3f;
hwif->mwdma_mask = 0x06;
hwif->swdma_mask = 0x04;
switch(hwif->pci_dev->device) {
- case PCI_DEVICE_ID_INTEL_82371MX:
- hwif->mwdma_mask = 0x80;
- hwif->swdma_mask = 0x80;
case PCI_DEVICE_ID_INTEL_82371FB_0:
case PCI_DEVICE_ID_INTEL_82371FB_1:
case PCI_DEVICE_ID_INTEL_82371SB_1:
@@ -507,14 +530,14 @@
hwif->ultra_mask = 0x07;
break;
default:
- pci_read_config_byte(hwif->pci_dev, 0x54, ®54h);
- pci_read_config_byte(hwif->pci_dev, 0x55, ®55h);
- ata66 = (reg54h & mask) ? 1 : 0;
+ if (!hwif->udma_four)
+ hwif->udma_four = piix_cable_detect(hwif);
break;
}
- if (!(hwif->udma_four))
- hwif->udma_four = ata66;
+ if (no_piix_dma)
+ hwif->ultra_mask = hwif->mwdma_mask = hwif->swdma_mask = 0;
+
hwif->ide_dma_check = &piix_config_drive_xfer_rate;
if (!noautodma)
hwif->autodma = 1;
diff --git a/drivers/ide/pci/sc1200.c b/drivers/ide/pci/sc1200.c
index 8d762d3..b5ae0c5 100644
--- a/drivers/ide/pci/sc1200.c
+++ b/drivers/ide/pci/sc1200.c
@@ -161,7 +161,7 @@
/*
* Default to DMA-off in case we run into trouble here.
*/
- hwif->ide_dma_off_quietly(drive); /* turn off DMA while we fiddle */
+ hwif->dma_off_quietly(drive); /* turn off DMA while we fiddle */
outb(inb(hwif->dma_base+2)&~(unit?0x40:0x20), hwif->dma_base+2); /* clear DMA_capable bit */
/*
@@ -241,10 +241,7 @@
outb(inb(hwif->dma_base+2)|(unit?0x40:0x20), hwif->dma_base+2); /* set DMA_capable bit */
- /*
- * Finally, turn DMA on in software, and exit.
- */
- return hwif->ide_dma_on(drive); /* success */
+ return 0; /* success */
}
/*
@@ -442,10 +439,10 @@
ide_drive_t *drive = &(hwif->drives[d]);
if (drive->present && !__ide_dma_bad_drive(drive)) {
int was_using_dma = drive->using_dma;
- hwif->ide_dma_off_quietly(drive);
+ hwif->dma_off_quietly(drive);
sc1200_config_dma(drive);
if (!was_using_dma && drive->using_dma) {
- hwif->ide_dma_off_quietly(drive);
+ hwif->dma_off_quietly(drive);
}
}
}
diff --git a/drivers/ide/pci/serverworks.c b/drivers/ide/pci/serverworks.c
index ea9a28a..dbcd37a 100644
--- a/drivers/ide/pci/serverworks.c
+++ b/drivers/ide/pci/serverworks.c
@@ -160,7 +160,7 @@
if ((dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE) ||
(dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2)) {
if (!drive->init_speed) {
- u8 dma_stat = hwif->INB(hwif->dma_status);
+ u8 dma_stat = inb(hwif->dma_status);
dma_pio:
if (((ultra_enable << (7-drive->dn) & 0x80) == 0x80) &&
@@ -315,35 +315,15 @@
static int svwks_config_drive_xfer_rate (ide_drive_t *drive)
{
- ide_hwif_t *hwif = HWIF(drive);
- struct hd_driveid *id = drive->id;
-
drive->init_speed = 0;
- if ((id->capability & 1) && drive->autodma) {
+ if (ide_use_dma(drive) && config_chipset_for_dma(drive))
+ return 0;
- if (ide_use_dma(drive)) {
- if (config_chipset_for_dma(drive))
- return hwif->ide_dma_on(drive);
- }
-
- goto fast_ata_pio;
-
- } else if ((id->capability & 8) || (id->field_valid & 2)) {
-fast_ata_pio:
+ if (ide_use_fast_pio(drive))
config_chipset_for_pio(drive);
- // hwif->tuneproc(drive, 5);
- return hwif->ide_dma_off_quietly(drive);
- }
- /* IORDY not supported */
- return 0;
-}
-/* This can go soon */
-
-static int svwks_ide_dma_end (ide_drive_t *drive)
-{
- return __ide_dma_end(drive);
+ return -1;
}
static unsigned int __devinit init_chipset_svwks (struct pci_dev *dev, const char *name)
@@ -537,35 +517,20 @@
}
hwif->ide_dma_check = &svwks_config_drive_xfer_rate;
- if (hwif->pci_dev->device == PCI_DEVICE_ID_SERVERWORKS_OSB4IDE)
- hwif->ide_dma_end = &svwks_ide_dma_end;
- else if (!(hwif->udma_four))
- hwif->udma_four = ata66_svwks(hwif);
+ if (hwif->pci_dev->device != PCI_DEVICE_ID_SERVERWORKS_OSB4IDE) {
+ if (!hwif->udma_four)
+ hwif->udma_four = ata66_svwks(hwif);
+ }
if (!noautodma)
hwif->autodma = 1;
- dma_stat = hwif->INB(hwif->dma_status);
+ dma_stat = inb(hwif->dma_status);
hwif->drives[0].autodma = (dma_stat & 0x20);
hwif->drives[1].autodma = (dma_stat & 0x40);
hwif->drives[0].autotune = (!(dma_stat & 0x20));
hwif->drives[1].autotune = (!(dma_stat & 0x40));
}
-/*
- * We allow the BM-DMA driver to only work on enabled interfaces.
- */
-static void __devinit init_dma_svwks (ide_hwif_t *hwif, unsigned long dmabase)
-{
- struct pci_dev *dev = hwif->pci_dev;
-
- if (((dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE) ||
- (dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2)) &&
- (!(PCI_FUNC(dev->devfn) & 1)) && (hwif->channel))
- return;
-
- ide_setup_dma(hwif, dmabase, 8);
-}
-
static int __devinit init_setup_svwks (struct pci_dev *dev, ide_pci_device_t *d)
{
return ide_setup_pci_device(dev, d);
@@ -600,7 +565,6 @@
.init_setup = init_setup_svwks,
.init_chipset = init_chipset_svwks,
.init_hwif = init_hwif_svwks,
- .init_dma = init_dma_svwks,
.channels = 2,
.autodma = AUTODMA,
.bootable = ON_BOARD,
@@ -609,7 +573,6 @@
.init_setup = init_setup_csb6,
.init_chipset = init_chipset_svwks,
.init_hwif = init_hwif_svwks,
- .init_dma = init_dma_svwks,
.channels = 2,
.autodma = AUTODMA,
.bootable = ON_BOARD,
@@ -618,7 +581,6 @@
.init_setup = init_setup_csb6,
.init_chipset = init_chipset_svwks,
.init_hwif = init_hwif_svwks,
- .init_dma = init_dma_svwks,
.channels = 1, /* 2 */
.autodma = AUTODMA,
.bootable = ON_BOARD,
@@ -627,7 +589,6 @@
.init_setup = init_setup_svwks,
.init_chipset = init_chipset_svwks,
.init_hwif = init_hwif_svwks,
- .init_dma = init_dma_svwks,
.channels = 1, /* 2 */
.autodma = AUTODMA,
.bootable = ON_BOARD,
diff --git a/drivers/ide/pci/sgiioc4.c b/drivers/ide/pci/sgiioc4.c
index b0bf018..fd09b29 100644
--- a/drivers/ide/pci/sgiioc4.c
+++ b/drivers/ide/pci/sgiioc4.c
@@ -110,24 +110,24 @@
static void
sgiioc4_maskproc(ide_drive_t * drive, int mask)
{
- ide_hwif_t *hwif = HWIF(drive);
- hwif->OUTB(mask ? (drive->ctl | 2) : (drive->ctl & ~2),
- IDE_CONTROL_REG);
+ writeb(mask ? (drive->ctl | 2) : (drive->ctl & ~2),
+ (void __iomem *)IDE_CONTROL_REG);
}
static int
sgiioc4_checkirq(ide_hwif_t * hwif)
{
- u8 intr_reg =
- hwif->INL(hwif->io_ports[IDE_IRQ_OFFSET] + IOC4_INTR_REG * 4);
+ unsigned long intr_addr =
+ hwif->io_ports[IDE_IRQ_OFFSET] + IOC4_INTR_REG * 4;
- if (intr_reg & 0x03)
+ if ((u8)readl((void __iomem *)intr_addr) & 0x03)
return 1;
return 0;
}
+static u8 sgiioc4_INB(unsigned long);
static int
sgiioc4_clearirq(ide_drive_t * drive)
@@ -138,21 +138,21 @@
hwif->io_ports[IDE_IRQ_OFFSET] + (IOC4_INTR_REG << 2);
/* Code to check for PCI error conditions */
- intr_reg = hwif->INL(other_ir);
+ intr_reg = readl((void __iomem *)other_ir);
if (intr_reg & 0x03) { /* Valid IOC4-IDE interrupt */
/*
- * Using hwif->INB to read the IDE_STATUS_REG has a side effect
+ * Using sgiioc4_INB to read the IDE_STATUS_REG has a side effect
* of clearing the interrupt. The first read should clear it
* if it is set. The second read should return a "clear" status
* if it got cleared. If not, then spin for a bit trying to
* clear it.
*/
- u8 stat = hwif->INB(IDE_STATUS_REG);
+ u8 stat = sgiioc4_INB(IDE_STATUS_REG);
int count = 0;
- stat = hwif->INB(IDE_STATUS_REG);
+ stat = sgiioc4_INB(IDE_STATUS_REG);
while ((stat & 0x80) && (count++ < 100)) {
udelay(1);
- stat = hwif->INB(IDE_STATUS_REG);
+ stat = sgiioc4_INB(IDE_STATUS_REG);
}
if (intr_reg & 0x02) {
@@ -161,9 +161,9 @@
pci_stat_cmd_reg;
pci_err_addr_low =
- hwif->INL(hwif->io_ports[IDE_IRQ_OFFSET]);
+ readl((void __iomem *)hwif->io_ports[IDE_IRQ_OFFSET]);
pci_err_addr_high =
- hwif->INL(hwif->io_ports[IDE_IRQ_OFFSET] + 4);
+ readl((void __iomem *)(hwif->io_ports[IDE_IRQ_OFFSET] + 4));
pci_read_config_dword(hwif->pci_dev, PCI_COMMAND,
&pci_stat_cmd_reg);
printk(KERN_ERR
@@ -180,9 +180,9 @@
}
/* Clear the Interrupt, Error bits on the IOC4 */
- hwif->OUTL(0x03, other_ir);
+ writel(0x03, (void __iomem *)other_ir);
- intr_reg = hwif->INL(other_ir);
+ intr_reg = readl((void __iomem *)other_ir);
}
return intr_reg & 3;
@@ -191,23 +191,25 @@
static void sgiioc4_ide_dma_start(ide_drive_t * drive)
{
ide_hwif_t *hwif = HWIF(drive);
- unsigned int reg = hwif->INL(hwif->dma_base + IOC4_DMA_CTRL * 4);
+ unsigned long ioc4_dma_addr = hwif->dma_base + IOC4_DMA_CTRL * 4;
+ unsigned int reg = readl((void __iomem *)ioc4_dma_addr);
unsigned int temp_reg = reg | IOC4_S_DMA_START;
- hwif->OUTL(temp_reg, hwif->dma_base + IOC4_DMA_CTRL * 4);
+ writel(temp_reg, (void __iomem *)ioc4_dma_addr);
}
static u32
sgiioc4_ide_dma_stop(ide_hwif_t *hwif, u64 dma_base)
{
+ unsigned long ioc4_dma_addr = dma_base + IOC4_DMA_CTRL * 4;
u32 ioc4_dma;
int count;
count = 0;
- ioc4_dma = hwif->INL(dma_base + IOC4_DMA_CTRL * 4);
+ ioc4_dma = readl((void __iomem *)ioc4_dma_addr);
while ((ioc4_dma & IOC4_S_DMA_STOP) && (count++ < 200)) {
udelay(1);
- ioc4_dma = hwif->INL(dma_base + IOC4_DMA_CTRL * 4);
+ ioc4_dma = readl((void __iomem *)ioc4_dma_addr);
}
return ioc4_dma;
}
@@ -218,11 +220,11 @@
{
u32 ioc4_dma, bc_dev, bc_mem, num, valid = 0, cnt = 0;
ide_hwif_t *hwif = HWIF(drive);
- u64 dma_base = hwif->dma_base;
+ unsigned long dma_base = hwif->dma_base;
int dma_stat = 0;
unsigned long *ending_dma = ide_get_hwifdata(hwif);
- hwif->OUTL(IOC4_S_DMA_STOP, dma_base + IOC4_DMA_CTRL * 4);
+ writel(IOC4_S_DMA_STOP, (void __iomem *)(dma_base + IOC4_DMA_CTRL * 4));
ioc4_dma = sgiioc4_ide_dma_stop(hwif, dma_base);
@@ -254,8 +256,8 @@
dma_stat = 1;
}
- bc_dev = hwif->INL(dma_base + IOC4_BC_DEV * 4);
- bc_mem = hwif->INL(dma_base + IOC4_BC_MEM * 4);
+ bc_dev = readl((void __iomem *)(dma_base + IOC4_BC_DEV * 4));
+ bc_mem = readl((void __iomem *)(dma_base + IOC4_BC_MEM * 4));
if ((bc_dev & 0x01FF) || (bc_mem & 0x1FF)) {
if (bc_dev > bc_mem + 8) {
@@ -273,34 +275,29 @@
}
static int
-sgiioc4_ide_dma_check(ide_drive_t * drive)
-{
- if (ide_config_drive_speed(drive, XFER_MW_DMA_2) != 0) {
- printk(KERN_INFO
- "Couldnot set %s in Multimode-2 DMA mode | "
- "Drive %s using PIO instead\n",
- drive->name, drive->name);
- drive->using_dma = 0;
- } else
- drive->using_dma = 1;
-
- return 0;
-}
-
-static int
sgiioc4_ide_dma_on(ide_drive_t * drive)
{
drive->using_dma = 1;
- return HWIF(drive)->ide_dma_host_on(drive);
+ return 0;
}
-static int
-sgiioc4_ide_dma_off_quietly(ide_drive_t * drive)
+static void sgiioc4_dma_off_quietly(ide_drive_t *drive)
{
drive->using_dma = 0;
- return HWIF(drive)->ide_dma_host_off(drive);
+ drive->hwif->dma_host_off(drive);
+}
+
+static int sgiioc4_ide_dma_check(ide_drive_t *drive)
+{
+ /* FIXME: check for available DMA modes */
+ if (ide_config_drive_speed(drive, XFER_MW_DMA_2) != 0) {
+ printk(KERN_WARNING "%s: couldn't set MWDMA2 mode, "
+ "using PIO instead\n", drive->name);
+ return -1;
+ } else
+ return 0;
}
/* returns 1 if dma irq issued, 0 otherwise */
@@ -310,21 +307,13 @@
return sgiioc4_checkirq(HWIF(drive));
}
-static int
-sgiioc4_ide_dma_host_on(ide_drive_t * drive)
+static void sgiioc4_dma_host_on(ide_drive_t * drive)
{
- if (drive->using_dma)
- return 0;
-
- return 1;
}
-static int
-sgiioc4_ide_dma_host_off(ide_drive_t * drive)
+static void sgiioc4_dma_host_off(ide_drive_t * drive)
{
sgiioc4_clearirq(drive);
-
- return 0;
}
static int
@@ -436,16 +425,17 @@
{
u32 ioc4_dma;
ide_hwif_t *hwif = HWIF(drive);
- u64 dma_base = hwif->dma_base;
+ unsigned long dma_base = hwif->dma_base;
+ unsigned long ioc4_dma_addr = dma_base + IOC4_DMA_CTRL * 4;
u32 dma_addr, ending_dma_addr;
- ioc4_dma = hwif->INL(dma_base + IOC4_DMA_CTRL * 4);
+ ioc4_dma = readl((void __iomem *)ioc4_dma_addr);
if (ioc4_dma & IOC4_S_DMA_ACTIVE) {
printk(KERN_WARNING
"%s(%s):Warning!! DMA from previous transfer was still active\n",
__FUNCTION__, drive->name);
- hwif->OUTL(IOC4_S_DMA_STOP, dma_base + IOC4_DMA_CTRL * 4);
+ writel(IOC4_S_DMA_STOP, (void __iomem *)ioc4_dma_addr);
ioc4_dma = sgiioc4_ide_dma_stop(hwif, dma_base);
if (ioc4_dma & IOC4_S_DMA_STOP)
@@ -454,13 +444,13 @@
__FUNCTION__, drive->name);
}
- ioc4_dma = hwif->INL(dma_base + IOC4_DMA_CTRL * 4);
+ ioc4_dma = readl((void __iomem *)ioc4_dma_addr);
if (ioc4_dma & IOC4_S_DMA_ERROR) {
printk(KERN_WARNING
"%s(%s) : Warning!! - DMA Error during Previous"
" transfer | status 0x%x\n",
__FUNCTION__, drive->name, ioc4_dma);
- hwif->OUTL(IOC4_S_DMA_STOP, dma_base + IOC4_DMA_CTRL * 4);
+ writel(IOC4_S_DMA_STOP, (void __iomem *)ioc4_dma_addr);
ioc4_dma = sgiioc4_ide_dma_stop(hwif, dma_base);
if (ioc4_dma & IOC4_S_DMA_STOP)
@@ -471,14 +461,14 @@
/* Address of the Scatter Gather List */
dma_addr = cpu_to_le32(hwif->dmatable_dma);
- hwif->OUTL(dma_addr, dma_base + IOC4_DMA_PTR_L * 4);
+ writel(dma_addr, (void __iomem *)(dma_base + IOC4_DMA_PTR_L * 4));
/* Address of the Ending DMA */
memset(ide_get_hwifdata(hwif), 0, IOC4_IDE_CACHELINE_SIZE);
ending_dma_addr = cpu_to_le32(hwif->dma_status);
- hwif->OUTL(ending_dma_addr, dma_base + IOC4_DMA_END_ADDR * 4);
+ writel(ending_dma_addr, (void __iomem *)(dma_base + IOC4_DMA_END_ADDR * 4));
- hwif->OUTL(dma_direction, dma_base + IOC4_DMA_CTRL * 4);
+ writel(dma_direction, (void __iomem *)ioc4_dma_addr);
drive->waiting_for_dma = 1;
}
@@ -590,7 +580,7 @@
static void __devinit
ide_init_sgiioc4(ide_hwif_t * hwif)
{
- hwif->mmio = 2;
+ hwif->mmio = 1;
hwif->autodma = 1;
hwif->atapi_dma = 1;
hwif->ultra_mask = 0x0; /* Disable Ultra DMA */
@@ -613,10 +603,10 @@
hwif->ide_dma_end = &sgiioc4_ide_dma_end;
hwif->ide_dma_check = &sgiioc4_ide_dma_check;
hwif->ide_dma_on = &sgiioc4_ide_dma_on;
- hwif->ide_dma_off_quietly = &sgiioc4_ide_dma_off_quietly;
+ hwif->dma_off_quietly = &sgiioc4_dma_off_quietly;
hwif->ide_dma_test_irq = &sgiioc4_ide_dma_test_irq;
- hwif->ide_dma_host_on = &sgiioc4_ide_dma_host_on;
- hwif->ide_dma_host_off = &sgiioc4_ide_dma_host_off;
+ hwif->dma_host_on = &sgiioc4_dma_host_on;
+ hwif->dma_host_off = &sgiioc4_dma_host_off;
hwif->ide_dma_lostirq = &sgiioc4_ide_dma_lostirq;
hwif->ide_dma_timeout = &__ide_dma_timeout;
@@ -688,7 +678,7 @@
default_hwif_mmiops(hwif);
/* Initializing chipset IRQ Registers */
- hwif->OUTL(0x03, irqport + IOC4_INTR_SET * 4);
+ writel(0x03, (void __iomem *)(irqport + IOC4_INTR_SET * 4));
ide_init_sgiioc4(hwif);
@@ -729,8 +719,7 @@
return ret;
}
-static ide_pci_device_t sgiioc4_chipsets[] __devinitdata = {
- {
+static ide_pci_device_t sgiioc4_chipset __devinitdata = {
/* Channel 0 */
.name = "SGIIOC4",
.init_hwif = ide_init_sgiioc4,
@@ -739,7 +728,6 @@
.autodma = AUTODMA,
/* SGI IOC4 doesn't have enablebits. */
.bootable = ON_BOARD,
- }
};
int
@@ -751,8 +739,7 @@
if (idd->idd_variant == IOC4_VARIANT_PCI_RT)
return 0;
- return pci_init_sgiioc4(idd->idd_pdev,
- &sgiioc4_chipsets[idd->idd_pci_id->driver_data]);
+ return pci_init_sgiioc4(idd->idd_pdev, &sgiioc4_chipset);
}
static struct ioc4_submodule ioc4_ide_submodule = {
diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c
index 4ff89c7..7b4c189 100644
--- a/drivers/ide/pci/siimage.c
+++ b/drivers/ide/pci/siimage.c
@@ -1,8 +1,9 @@
/*
- * linux/drivers/ide/pci/siimage.c Version 1.07 Nov 30, 2003
+ * linux/drivers/ide/pci/siimage.c Version 1.11 Jan 27, 2007
*
* Copyright (C) 2001-2002 Andre Hedrick <andre@linux-ide.org>
* Copyright (C) 2003 Red Hat <alan@redhat.com>
+ * Copyright (C) 2007 MontaVista Software, Inc.
*
* May be copied or modified under the terms of the GNU General Public License
*
@@ -205,41 +206,39 @@
unsigned long tfaddr = siimage_selreg(hwif, 0x02);
/* cheat for now and use the docs */
- switch(mode_wanted) {
- case 4:
- speedp = 0x10c1;
- speedt = 0x10c1;
- break;
- case 3:
- speedp = 0x10C3;
- speedt = 0x10C3;
- break;
- case 2:
- speedp = 0x1104;
- speedt = 0x1281;
- break;
- case 1:
- speedp = 0x2283;
- speedt = 0x1281;
- break;
- case 0:
- default:
- speedp = 0x328A;
- speedt = 0x328A;
- break;
+ switch (mode_wanted) {
+ case 4:
+ speedp = 0x10c1;
+ speedt = 0x10c1;
+ break;
+ case 3:
+ speedp = 0x10c3;
+ speedt = 0x10c3;
+ break;
+ case 2:
+ speedp = 0x1104;
+ speedt = 0x1281;
+ break;
+ case 1:
+ speedp = 0x2283;
+ speedt = 0x2283;
+ break;
+ case 0:
+ default:
+ speedp = 0x328a;
+ speedt = 0x328a;
+ break;
}
- if (hwif->mmio)
- {
- hwif->OUTW(speedt, addr);
- hwif->OUTW(speedp, tfaddr);
+
+ if (hwif->mmio) {
+ hwif->OUTW(speedp, addr);
+ hwif->OUTW(speedt, tfaddr);
/* Now set up IORDY */
if(mode_wanted == 3 || mode_wanted == 4)
hwif->OUTW(hwif->INW(tfaddr-2)|0x200, tfaddr-2);
else
hwif->OUTW(hwif->INW(tfaddr-2)&~0x200, tfaddr-2);
- }
- else
- {
+ } else {
pci_write_config_word(hwif->pci_dev, addr, speedp);
pci_write_config_word(hwif->pci_dev, tfaddr, speedt);
pci_read_config_word(hwif->pci_dev, tfaddr-2, &speedp);
@@ -397,12 +396,9 @@
if (!speed)
return 0;
- if (ide_set_xfer_rate(drive, speed))
+ if (siimage_tune_chipset(drive, speed))
return 0;
- if (!drive->init_speed)
- drive->init_speed = speed;
-
return ide_dma_enable(drive);
}
@@ -418,25 +414,13 @@
static int siimage_config_drive_for_dma (ide_drive_t *drive)
{
- ide_hwif_t *hwif = HWIF(drive);
- struct hd_driveid *id = drive->id;
+ if (ide_use_dma(drive) && config_chipset_for_dma(drive))
+ return 0;
- if ((id->capability & 1) != 0 && drive->autodma) {
-
- if (ide_use_dma(drive)) {
- if (config_chipset_for_dma(drive))
- return hwif->ide_dma_on(drive);
- }
-
- goto fast_ata_pio;
-
- } else if ((id->capability & 8) || (id->field_valid & 2)) {
-fast_ata_pio:
+ if (ide_use_fast_pio(drive))
config_chipset_for_pio(drive, 1);
- return hwif->ide_dma_off_quietly(drive);
- }
- /* IORDY not supported */
- return 0;
+
+ return -1;
}
/* returns 1 if dma irq issued, 0 otherwise */
@@ -472,11 +456,11 @@
unsigned long addr = siimage_selreg(hwif, 0x1);
if (SATA_ERROR_REG) {
- u32 ext_stat = hwif->INL(base + 0x10);
+ u32 ext_stat = readl((void __iomem *)(base + 0x10));
u8 watchdog = 0;
if (ext_stat & ((hwif->channel) ? 0x40 : 0x10)) {
- u32 sata_error = hwif->INL(SATA_ERROR_REG);
- hwif->OUTL(sata_error, SATA_ERROR_REG);
+ u32 sata_error = readl((void __iomem *)SATA_ERROR_REG);
+ writel(sata_error, (void __iomem *)SATA_ERROR_REG);
watchdog = (sata_error & 0x00680000) ? 1 : 0;
printk(KERN_WARNING "%s: sata_error = 0x%08x, "
"watchdog = %d, %s\n",
@@ -493,11 +477,11 @@
}
/* return 1 if INTR asserted */
- if ((hwif->INB(hwif->dma_status) & 0x04) == 0x04)
+ if ((readb((void __iomem *)hwif->dma_status) & 0x04) == 0x04)
return 1;
/* return 1 if Device INTR asserted */
- if ((hwif->INB(addr) & 8) == 8)
+ if ((readb((void __iomem *)addr) & 8) == 8)
return 0; //return 1;
return 0;
@@ -519,9 +503,9 @@
u32 stat_config = 0;
unsigned long addr = siimage_selreg(hwif, 0);
- if (hwif->mmio) {
- stat_config = hwif->INL(addr);
- } else
+ if (hwif->mmio)
+ stat_config = readl((void __iomem *)addr);
+ else
pci_read_config_dword(hwif->pci_dev, addr, &stat_config);
switch (state) {
@@ -557,9 +541,10 @@
if (SATA_STATUS_REG) {
ide_hwif_t *hwif = HWIF(drive);
- if ((hwif->INL(SATA_STATUS_REG) & 0x03) != 0x03) {
+ /* SATA_STATUS_REG is valid only when in MMIO mode */
+ if ((readl((void __iomem *)SATA_STATUS_REG) & 0x03) != 0x03) {
printk(KERN_WARNING "%s: reset phy dead, status=0x%08x\n",
- hwif->name, hwif->INL(SATA_STATUS_REG));
+ hwif->name, readl((void __iomem *)SATA_STATUS_REG));
HWGROUP(drive)->polling = 0;
return ide_started;
}
@@ -619,7 +604,8 @@
}
if (SATA_STATUS_REG) {
- u32 sata_stat = hwif->INL(SATA_STATUS_REG);
+ /* SATA_STATUS_REG is valid only when in MMIO mode */
+ u32 sata_stat = readl((void __iomem *)SATA_STATUS_REG);
printk(KERN_WARNING "%s: reset phy, status=0x%08x, %s\n",
hwif->name, sata_stat, __FUNCTION__);
if (!(sata_stat)) {
@@ -898,7 +884,8 @@
base = (unsigned long) addr;
hwif->dma_base = base + (ch ? 0x08 : 0x00);
- hwif->mmio = 2;
+
+ hwif->mmio = 1;
}
static int is_dev_seagate_sata(ide_drive_t *drive)
diff --git a/drivers/ide/pci/sis5513.c b/drivers/ide/pci/sis5513.c
index 1afff65..2ba0669 100644
--- a/drivers/ide/pci/sis5513.c
+++ b/drivers/ide/pci/sis5513.c
@@ -667,68 +667,21 @@
return ide_dma_enable(drive);
}
-static int sis5513_config_drive_xfer_rate (ide_drive_t *drive)
+static int sis5513_config_xfer_rate(ide_drive_t *drive)
{
- ide_hwif_t *hwif = HWIF(drive);
- struct hd_driveid *id = drive->id;
+ config_art_rwp_pio(drive, 5);
drive->init_speed = 0;
- if (id && (id->capability & 1) && drive->autodma) {
+ if (ide_use_dma(drive) && config_chipset_for_dma(drive))
+ return 0;
- if (ide_use_dma(drive)) {
- if (config_chipset_for_dma(drive))
- return hwif->ide_dma_on(drive);
- }
-
- goto fast_ata_pio;
-
- } else if ((id->capability & 8) || (id->field_valid & 2)) {
-fast_ata_pio:
+ if (ide_use_fast_pio(drive))
sis5513_tune_drive(drive, 5);
- return hwif->ide_dma_off_quietly(drive);
- }
- /* IORDY not supported */
- return 0;
+
+ return -1;
}
-/* initiates/aborts (U)DMA read/write operations on a drive. */
-static int sis5513_config_xfer_rate (ide_drive_t *drive)
-{
- config_drive_art_rwp(drive);
- config_art_rwp_pio(drive, 5);
- return sis5513_config_drive_xfer_rate(drive);
-}
-
-/*
- Future simpler config_xfer_rate :
- When ide_find_best_mode is made bad-drive aware
- - remove config_drive_xfer_rate and config_chipset_for_dma,
- - replace config_xfer_rate with the following
-
-static int sis5513_config_xfer_rate (ide_drive_t *drive)
-{
- u16 w80 = HWIF(drive)->udma_four;
- u16 speed;
-
- config_drive_art_rwp(drive);
- config_art_rwp_pio(drive, 5);
-
- speed = ide_find_best_mode(drive,
- XFER_PIO | XFER_EPIO | XFER_SWDMA | XFER_MWDMA |
- (chipset_family >= ATA_33 ? XFER_UDMA : 0) |
- (w80 && chipset_family >= ATA_66 ? XFER_UDMA_66 : 0) |
- (w80 && chipset_family >= ATA_100a ? XFER_UDMA_100 : 0) |
- (w80 && chipset_family >= ATA_133a ? XFER_UDMA_133 : 0));
-
- sis5513_tune_chipset(drive, speed);
-
- if (drive->autodma && (speed & XFER_MODE) != XFER_PIO)
- return HWIF(drive)->ide_dma_on(drive);
- return HWIF(drive)->ide_dma_off_quietly(drive);
-}
-*/
-
/* Chip detection and general config */
static unsigned int __devinit init_chipset_sis5513 (struct pci_dev *dev, const char *name)
{
diff --git a/drivers/ide/pci/sl82c105.c b/drivers/ide/pci/sl82c105.c
index 170a261..3a8a76f 100644
--- a/drivers/ide/pci/sl82c105.c
+++ b/drivers/ide/pci/sl82c105.c
@@ -161,14 +161,14 @@
if (id->field_valid & 2) {
if ((id->dma_mword & hwif->mwdma_mask) ||
(id->dma_1word & hwif->swdma_mask))
- return hwif->ide_dma_on(drive);
+ return 0;
}
- if (__ide_dma_good_drive(drive))
- return hwif->ide_dma_on(drive);
+ if (__ide_dma_good_drive(drive) && id->eide_dma_time < 150)
+ return 0;
} while (0);
- return hwif->ide_dma_off_quietly(drive);
+ return -1;
}
/*
@@ -215,7 +215,7 @@
* Was DMA enabled? If so, disable it - we're resetting the
* host. The IDE layer will be handling the drive for us.
*/
- val = hwif->INB(dma_base);
+ val = inb(dma_base);
if (val & 1) {
outb(val & ~1, dma_base);
printk("sl82c105: DMA was enabled\n");
@@ -259,28 +259,22 @@
{
DBG(("sl82c105_ide_dma_on(drive:%s)\n", drive->name));
- if (config_for_dma(drive)) {
- config_for_pio(drive, 4, 0, 0);
- return HWIF(drive)->ide_dma_off_quietly(drive);
- }
+ if (config_for_dma(drive))
+ return 1;
printk(KERN_INFO "%s: DMA enabled\n", drive->name);
return __ide_dma_on(drive);
}
-static int sl82c105_ide_dma_off_quietly (ide_drive_t *drive)
+static void sl82c105_dma_off_quietly(ide_drive_t *drive)
{
u8 speed = XFER_PIO_0;
- int rc;
-
- DBG(("sl82c105_ide_dma_off_quietly(drive:%s)\n", drive->name));
- rc = __ide_dma_off_quietly(drive);
+ DBG(("sl82c105_dma_off_quietly(drive:%s)\n", drive->name));
+
+ ide_dma_off_quietly(drive);
if (drive->pio_speed)
speed = drive->pio_speed - XFER_PIO_0;
config_for_pio(drive, speed, 0, 1);
- drive->current_speed = drive->pio_speed;
-
- return rc;
}
/*
@@ -401,11 +395,9 @@
/*
* Initialise the chip
*/
-
static void __devinit init_hwif_sl82c105(ide_hwif_t *hwif)
{
unsigned int rev;
- u8 dma_state;
DBG(("init_hwif_sl82c105(hwif: ide%d)\n", hwif->index));
@@ -431,7 +423,6 @@
if (!hwif->dma_base)
return;
- dma_state = hwif->INB(hwif->dma_base + 2) & ~0x60;
rev = sl82c105_bridge_revision(hwif->pci_dev);
if (rev <= 5) {
/*
@@ -441,15 +432,12 @@
printk(" %s: Winbond 553 bridge revision %d, BM-DMA disabled\n",
hwif->name, rev);
} else {
- dma_state |= 0x60;
-
hwif->atapi_dma = 1;
- hwif->mwdma_mask = 0x07;
- hwif->swdma_mask = 0x07;
+ hwif->mwdma_mask = 0x04;
hwif->ide_dma_check = &sl82c105_check_drive;
hwif->ide_dma_on = &sl82c105_ide_dma_on;
- hwif->ide_dma_off_quietly = &sl82c105_ide_dma_off_quietly;
+ hwif->dma_off_quietly = &sl82c105_dma_off_quietly;
hwif->ide_dma_lostirq = &sl82c105_ide_dma_lost_irq;
hwif->dma_start = &sl82c105_ide_dma_start;
hwif->ide_dma_timeout = &sl82c105_ide_dma_timeout;
@@ -462,7 +450,6 @@
if (hwif->mate)
hwif->serialized = hwif->mate->serialized = 1;
}
- hwif->OUTB(dma_state, hwif->dma_base + 2);
}
static ide_pci_device_t sl82c105_chipset __devinitdata = {
diff --git a/drivers/ide/pci/slc90e66.c b/drivers/ide/pci/slc90e66.c
index 2663ddb..ae7eb58 100644
--- a/drivers/ide/pci/slc90e66.c
+++ b/drivers/ide/pci/slc90e66.c
@@ -179,26 +179,16 @@
static int slc90e66_config_drive_xfer_rate (ide_drive_t *drive)
{
- ide_hwif_t *hwif = HWIF(drive);
- struct hd_driveid *id = drive->id;
-
drive->init_speed = 0;
- if ((id->capability & 1) && drive->autodma) {
+ if (ide_use_dma(drive) && slc90e66_config_drive_for_dma(drive))
+ return 0;
- if (ide_use_dma(drive) && slc90e66_config_drive_for_dma(drive))
- return hwif->ide_dma_on(drive);
+ if (ide_use_fast_pio(drive))
+ (void)slc90e66_tune_chipset(drive, XFER_PIO_0 +
+ ide_get_best_pio_mode(drive, 255, 4, NULL));
- goto fast_ata_pio;
-
- } else if ((id->capability & 8) || (id->field_valid & 2)) {
-fast_ata_pio:
- (void) hwif->speedproc(drive, XFER_PIO_0 +
- ide_get_best_pio_mode(drive, 255, 4, NULL));
- return hwif->ide_dma_off_quietly(drive);
- }
- /* IORDY not supported */
- return 0;
+ return -1;
}
static void __devinit init_hwif_slc90e66 (ide_hwif_t *hwif)
diff --git a/drivers/ide/pci/tc86c001.c b/drivers/ide/pci/tc86c001.c
index 2ad72bb..0b6d81d 100644
--- a/drivers/ide/pci/tc86c001.c
+++ b/drivers/ide/pci/tc86c001.c
@@ -45,7 +45,7 @@
scr &= (speed < XFER_MW_DMA_0) ? 0xf8ff : 0xff0f;
scr |= mode;
- hwif->OUTW(scr, scr_port);
+ outw(scr, scr_port);
return ide_config_drive_speed(drive, speed);
}
@@ -89,15 +89,15 @@
"attempting recovery...\n", drive->name);
/* Stop DMA */
- hwif->OUTB(dma_cmd & ~0x01, hwif->dma_command);
+ outb(dma_cmd & ~0x01, hwif->dma_command);
/* Setup the dummy DMA transfer */
- hwif->OUTW(0, sc_base + 0x0a); /* Sector Count */
- hwif->OUTW(0, twcr_port); /* Transfer Word Count 1 or 2 */
+ outw(0, sc_base + 0x0a); /* Sector Count */
+ outw(0, twcr_port); /* Transfer Word Count 1 or 2 */
/* Start the dummy DMA transfer */
- hwif->OUTB(0x00, hwif->dma_command); /* clear R_OR_WCTR for write */
- hwif->OUTB(0x01, hwif->dma_command); /* set START_STOPBM */
+ outb(0x00, hwif->dma_command); /* clear R_OR_WCTR for write */
+ outb(0x01, hwif->dma_command); /* set START_STOPBM */
/*
* If an interrupt was pending, it should come thru shortly.
@@ -128,8 +128,8 @@
* the appropriate system control registers for DMA to work
* with LBA48 and ATAPI devices...
*/
- hwif->OUTW(nsectors, sc_base + 0x0a); /* Sector Count */
- hwif->OUTW(SECTOR_SIZE / 2, twcr_port); /* Transfer Word Count 1/2 */
+ outw(nsectors, sc_base + 0x0a); /* Sector Count */
+ outw(SECTOR_SIZE / 2, twcr_port); /* Transfer Word Count 1/2 */
/* Install our timeout expiry hook, saving the current handler... */
ide_set_hwifdata(hwif, hwgroup->expiry);
@@ -168,7 +168,7 @@
}
/* System Control 1 Register bit 11 (ATA Hard Reset) write */
- hwif->OUTW(scr1, sc_base + 0x00);
+ outw(scr1, sc_base + 0x00);
return 0;
}
@@ -185,23 +185,13 @@
static int tc86c001_config_drive_xfer_rate(ide_drive_t *drive)
{
- ide_hwif_t *hwif = HWIF(drive);
- struct hd_driveid *id = drive->id;
+ if (ide_use_dma(drive) && config_chipset_for_dma(drive))
+ return 0;
- if ((id->capability & 1) && drive->autodma) {
-
- if (ide_use_dma(drive) && config_chipset_for_dma(drive))
- return hwif->ide_dma_on(drive);
-
- goto fast_ata_pio;
-
- } else if ((id->capability & 8) || (id->field_valid & 2)) {
-fast_ata_pio:
+ if (ide_use_fast_pio(drive))
tc86c001_tune_drive(drive, 255);
- return hwif->ide_dma_off_quietly(drive);
- }
- /* IORDY not supported */
- return 0;
+
+ return -1;
}
static void __devinit init_hwif_tc86c001(ide_hwif_t *hwif)
@@ -210,13 +200,13 @@
u16 scr1 = hwif->INW(sc_base + 0x00);;
/* System Control 1 Register bit 15 (Soft Reset) set */
- hwif->OUTW(scr1 | 0x8000, sc_base + 0x00);
+ outw(scr1 | 0x8000, sc_base + 0x00);
/* System Control 1 Register bit 14 (FIFO Reset) set */
- hwif->OUTW(scr1 | 0x4000, sc_base + 0x00);
+ outw(scr1 | 0x4000, sc_base + 0x00);
/* System Control 1 Register: reset clear */
- hwif->OUTW(scr1 & ~0xc000, sc_base + 0x00);
+ outw(scr1 & ~0xc000, sc_base + 0x00);
/* Store the system control register base for convenience... */
hwif->config_data = sc_base;
@@ -234,7 +224,7 @@
* Sector Count Control Register bits 0 and 1 set:
* software sets Sector Count Register for master and slave device
*/
- hwif->OUTW(0x0003, sc_base + 0x0c);
+ outw(0x0003, sc_base + 0x0c);
/* Sector Count Register limit */
hwif->rqsize = 0xffff;
diff --git a/drivers/ide/pci/triflex.c b/drivers/ide/pci/triflex.c
index b13cce1..5e06179 100644
--- a/drivers/ide/pci/triflex.c
+++ b/drivers/ide/pci/triflex.c
@@ -104,29 +104,21 @@
{
int speed = ide_dma_speed(drive, 0); /* No ultra speeds */
- if (!speed) {
- u8 pspeed = ide_get_best_pio_mode(drive, 255, 4, NULL);
- speed = XFER_PIO_0 + pspeed;
- }
-
+ if (!speed)
+ return 0;
+
(void) triflex_tune_chipset(drive, speed);
return ide_dma_enable(drive);
}
static int triflex_config_drive_xfer_rate(ide_drive_t *drive)
{
- ide_hwif_t *hwif = HWIF(drive);
- struct hd_driveid *id = drive->id;
+ if (ide_use_dma(drive) && triflex_config_drive_for_dma(drive))
+ return 0;
- if ((id->capability & 1) && drive->autodma) {
- if (ide_use_dma(drive)) {
- if (triflex_config_drive_for_dma(drive))
- return hwif->ide_dma_on(drive);
- }
- }
+ triflex_tune_drive(drive, 255);
- hwif->tuneproc(drive, 255);
- return hwif->ide_dma_off_quietly(drive);
+ return -1;
}
static void __devinit init_hwif_triflex(ide_hwif_t *hwif)
diff --git a/drivers/ide/pci/trm290.c b/drivers/ide/pci/trm290.c
index 174b88c..cbb1b11 100644
--- a/drivers/ide/pci/trm290.c
+++ b/drivers/ide/pci/trm290.c
@@ -157,16 +157,16 @@
if (reg != hwif->select_data) {
hwif->select_data = reg;
/* set PIO/DMA */
- hwif->OUTB(0x51|(hwif->channel<<3), hwif->config_data+1);
- hwif->OUTW(reg & 0xff, hwif->config_data);
+ outb(0x51 | (hwif->channel << 3), hwif->config_data + 1);
+ outw(reg & 0xff, hwif->config_data);
}
/* enable IRQ if not probing */
if (drive->present) {
- reg = hwif->INW(hwif->config_data + 3);
+ reg = inw(hwif->config_data + 3);
reg &= 0x13;
reg &= ~(1 << hwif->channel);
- hwif->OUTW(reg, hwif->config_data+3);
+ outw(reg, hwif->config_data + 3);
}
local_irq_restore(flags);
@@ -177,15 +177,12 @@
trm290_prepare_drive(drive, drive->using_dma);
}
-#ifdef CONFIG_BLK_DEV_IDEDMA
static void trm290_ide_dma_exec_cmd(ide_drive_t *drive, u8 command)
{
- ide_hwif_t *hwif = HWIF(drive);
-
BUG_ON(HWGROUP(drive)->handler != NULL); /* paranoia check */
ide_set_handler(drive, &ide_dma_intr, WAIT_CMD, NULL);
/* issue cmd to drive */
- hwif->OUTB(command, IDE_COMMAND_REG);
+ outb(command, IDE_COMMAND_REG);
}
static int trm290_ide_dma_setup(ide_drive_t *drive)
@@ -211,10 +208,10 @@
}
/* select DMA xfer */
trm290_prepare_drive(drive, 1);
- hwif->OUTL(hwif->dmatable_dma|rw, hwif->dma_command);
+ outl(hwif->dmatable_dma | rw, hwif->dma_command);
drive->waiting_for_dma = 1;
/* start DMA */
- hwif->OUTW((count * 2) - 1, hwif->dma_status);
+ outw((count * 2) - 1, hwif->dma_status);
return 0;
}
@@ -230,7 +227,7 @@
drive->waiting_for_dma = 0;
/* purge DMA mappings */
ide_destroy_dmatable(drive);
- status = hwif->INW(hwif->dma_status);
+ status = inw(hwif->dma_status);
return (status != 0x00ff);
}
@@ -239,10 +236,9 @@
ide_hwif_t *hwif = HWIF(drive);
u16 status = 0;
- status = hwif->INW(hwif->dma_status);
+ status = inw(hwif->dma_status);
return (status == 0x00ff);
}
-#endif /* CONFIG_BLK_DEV_IDEDMA */
/*
* Invoked from ide-dma.c at boot time.
@@ -269,15 +265,15 @@
local_irq_save(flags);
/* put config reg into first byte of hwif->select_data */
- hwif->OUTB(0x51|(hwif->channel<<3), hwif->config_data+1);
+ outb(0x51 | (hwif->channel << 3), hwif->config_data + 1);
/* select PIO as default */
hwif->select_data = 0x21;
- hwif->OUTB(hwif->select_data, hwif->config_data);
+ outb(hwif->select_data, hwif->config_data);
/* get IRQ info */
- reg = hwif->INB(hwif->config_data+3);
+ reg = inb(hwif->config_data + 3);
/* mask IRQs for both ports */
reg = (reg & 0x10) | 0x03;
- hwif->OUTB(reg, hwif->config_data+3);
+ outb(reg, hwif->config_data + 3);
local_irq_restore(flags);
if ((reg & 0x10))
@@ -289,13 +285,11 @@
ide_setup_dma(hwif, (hwif->config_data + 4) ^ (hwif->channel ? 0x0080 : 0x0000), 3);
-#ifdef CONFIG_BLK_DEV_IDEDMA
hwif->dma_setup = &trm290_ide_dma_setup;
hwif->dma_exec_cmd = &trm290_ide_dma_exec_cmd;
hwif->dma_start = &trm290_ide_dma_start;
hwif->ide_dma_end = &trm290_ide_dma_end;
hwif->ide_dma_test_irq = &trm290_ide_dma_test_irq;
-#endif /* CONFIG_BLK_DEV_IDEDMA */
hwif->selectproc = &trm290_selectproc;
hwif->autodma = 0; /* play it safe for now */
@@ -312,16 +306,16 @@
static u16 next_offset = 0;
u8 old_mask;
- hwif->OUTB(0x54|(hwif->channel<<3), hwif->config_data+1);
- old = hwif->INW(hwif->config_data);
+ outb(0x54 | (hwif->channel << 3), hwif->config_data + 1);
+ old = inw(hwif->config_data);
old &= ~1;
- old_mask = hwif->INB(old+2);
+ old_mask = inb(old + 2);
if (old != compat && old_mask == 0xff) {
/* leave lower 10 bits untouched */
compat += (next_offset += 0x400);
hwif->io_ports[IDE_CONTROL_OFFSET] = compat + 2;
- hwif->OUTW(compat|1, hwif->config_data);
- new = hwif->INW(hwif->config_data);
+ outw(compat | 1, hwif->config_data);
+ new = inw(hwif->config_data);
printk(KERN_INFO "%s: control basereg workaround: "
"old=0x%04x, new=0x%04x\n",
hwif->name, old, new & ~1);
diff --git a/drivers/ide/pci/via82cxxx.c b/drivers/ide/pci/via82cxxx.c
index 6fb6e50..a508550 100644
--- a/drivers/ide/pci/via82cxxx.c
+++ b/drivers/ide/pci/via82cxxx.c
@@ -240,8 +240,9 @@
via_set_drive(drive, speed);
if (drive->autodma && (speed & XFER_MODE) != XFER_PIO)
- return hwif->ide_dma_on(drive);
- return hwif->ide_dma_off_quietly(drive);
+ return 0;
+
+ return -1;
}
static struct via_isa_bridge *via_config_find(struct pci_dev **isa)
diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c
index d8ea237..395d352 100644
--- a/drivers/ide/ppc/pmac.c
+++ b/drivers/ide/ppc/pmac.c
@@ -1237,7 +1237,7 @@
hwif->OUTBSYNC = pmac_outbsync;
/* Tell common code _not_ to mess with resources */
- hwif->mmio = 2;
+ hwif->mmio = 1;
hwif->hwif_data = pmif;
pmac_ide_init_hwif_ports(&hwif->hw, pmif->regbase, 0, &hwif->irq);
memcpy(hwif->io_ports, hwif->hw.io_ports, sizeof(hwif->io_ports));
@@ -1979,16 +1979,12 @@
return 1;
}
-static int
-pmac_ide_dma_host_off (ide_drive_t *drive)
+static void pmac_ide_dma_host_off(ide_drive_t *drive)
{
- return 0;
}
-static int
-pmac_ide_dma_host_on (ide_drive_t *drive)
+static int pmac_ide_dma_host_on(ide_drive_t *drive)
{
- return 0;
}
static int
@@ -2034,7 +2030,7 @@
return;
}
- hwif->ide_dma_off_quietly = &__ide_dma_off_quietly;
+ hwif->dma_off_quietly = &ide_dma_off_quietly;
hwif->ide_dma_on = &__ide_dma_on;
hwif->ide_dma_check = &pmac_ide_dma_check;
hwif->dma_setup = &pmac_ide_dma_setup;
@@ -2042,8 +2038,8 @@
hwif->dma_start = &pmac_ide_dma_start;
hwif->ide_dma_end = &pmac_ide_dma_end;
hwif->ide_dma_test_irq = &pmac_ide_dma_test_irq;
- hwif->ide_dma_host_off = &pmac_ide_dma_host_off;
- hwif->ide_dma_host_on = &pmac_ide_dma_host_on;
+ hwif->dma_host_off = &pmac_ide_dma_host_off;
+ hwif->dma_host_on = &pmac_ide_dma_host_on;
hwif->ide_dma_timeout = &__ide_dma_timeout;
hwif->ide_dma_lostirq = &pmac_ide_dma_lostirq;
diff --git a/drivers/ide/ppc/scc_pata.c b/drivers/ide/ppc/scc_pata.c
new file mode 100644
index 0000000..de64b02
--- /dev/null
+++ b/drivers/ide/ppc/scc_pata.c
@@ -0,0 +1,831 @@
+/*
+ * Support for IDE interfaces on Celleb platform
+ *
+ * (C) Copyright 2006 TOSHIBA CORPORATION
+ *
+ * This code is based on drivers/ide/pci/siimage.c:
+ * Copyright (C) 2001-2002 Andre Hedrick <andre@linux-ide.org>
+ * Copyright (C) 2003 Red Hat <alan@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/hdreg.h>
+#include <linux/ide.h>
+#include <linux/init.h>
+
+#define PCI_DEVICE_ID_TOSHIBA_SCC_ATA 0x01b4
+
+#define SCC_PATA_NAME "scc IDE"
+
+#define TDVHSEL_MASTER 0x00000001
+#define TDVHSEL_SLAVE 0x00000004
+
+#define MODE_JCUSFEN 0x00000080
+
+#define CCKCTRL_ATARESET 0x00040000
+#define CCKCTRL_BUFCNT 0x00020000
+#define CCKCTRL_CRST 0x00010000
+#define CCKCTRL_OCLKEN 0x00000100
+#define CCKCTRL_ATACLKOEN 0x00000002
+#define CCKCTRL_LCLKEN 0x00000001
+
+#define QCHCD_IOS_SS 0x00000001
+
+#define QCHSD_STPDIAG 0x00020000
+
+#define INTMASK_MSK 0xD1000012
+#define INTSTS_SERROR 0x80000000
+#define INTSTS_PRERR 0x40000000
+#define INTSTS_RERR 0x10000000
+#define INTSTS_ICERR 0x01000000
+#define INTSTS_BMSINT 0x00000010
+#define INTSTS_BMHE 0x00000008
+#define INTSTS_IOIRQS 0x00000004
+#define INTSTS_INTRQ 0x00000002
+#define INTSTS_ACTEINT 0x00000001
+
+#define ECMODE_VALUE 0x01
+
+static struct scc_ports {
+ unsigned long ctl, dma;
+ unsigned char hwif_id; /* for removing hwif from system */
+} scc_ports[MAX_HWIFS];
+
+/* PIO transfer mode table */
+/* JCHST */
+static unsigned long JCHSTtbl[2][7] = {
+ {0x0E, 0x05, 0x02, 0x03, 0x02, 0x00, 0x00}, /* 100MHz */
+ {0x13, 0x07, 0x04, 0x04, 0x03, 0x00, 0x00} /* 133MHz */
+};
+
+/* JCHHT */
+static unsigned long JCHHTtbl[2][7] = {
+ {0x0E, 0x02, 0x02, 0x02, 0x02, 0x00, 0x00}, /* 100MHz */
+ {0x13, 0x03, 0x03, 0x03, 0x03, 0x00, 0x00} /* 133MHz */
+};
+
+/* JCHCT */
+static unsigned long JCHCTtbl[2][7] = {
+ {0x1D, 0x1D, 0x1C, 0x0B, 0x06, 0x00, 0x00}, /* 100MHz */
+ {0x27, 0x26, 0x26, 0x0E, 0x09, 0x00, 0x00} /* 133MHz */
+};
+
+
+/* DMA transfer mode table */
+/* JCHDCTM/JCHDCTS */
+static unsigned long JCHDCTxtbl[2][7] = {
+ {0x0A, 0x06, 0x04, 0x03, 0x01, 0x00, 0x00}, /* 100MHz */
+ {0x0E, 0x09, 0x06, 0x04, 0x02, 0x01, 0x00} /* 133MHz */
+};
+
+/* JCSTWTM/JCSTWTS */
+static unsigned long JCSTWTxtbl[2][7] = {
+ {0x06, 0x04, 0x03, 0x02, 0x02, 0x02, 0x00}, /* 100MHz */
+ {0x09, 0x06, 0x04, 0x02, 0x02, 0x02, 0x02} /* 133MHz */
+};
+
+/* JCTSS */
+static unsigned long JCTSStbl[2][7] = {
+ {0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x00}, /* 100MHz */
+ {0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05} /* 133MHz */
+};
+
+/* JCENVT */
+static unsigned long JCENVTtbl[2][7] = {
+ {0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x00}, /* 100MHz */
+ {0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02} /* 133MHz */
+};
+
+/* JCACTSELS/JCACTSELM */
+static unsigned long JCACTSELtbl[2][7] = {
+ {0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x00}, /* 100MHz */
+ {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01} /* 133MHz */
+};
+
+
+static u8 scc_ide_inb(unsigned long port)
+{
+ u32 data = in_be32((void*)port);
+ return (u8)data;
+}
+
+static u16 scc_ide_inw(unsigned long port)
+{
+ u32 data = in_be32((void*)port);
+ return (u16)data;
+}
+
+static void scc_ide_insw(unsigned long port, void *addr, u32 count)
+{
+ u16 *ptr = (u16 *)addr;
+ while (count--) {
+ *ptr++ = le16_to_cpu(in_be32((void*)port));
+ }
+}
+
+static void scc_ide_insl(unsigned long port, void *addr, u32 count)
+{
+ u16 *ptr = (u16 *)addr;
+ while (count--) {
+ *ptr++ = le16_to_cpu(in_be32((void*)port));
+ *ptr++ = le16_to_cpu(in_be32((void*)port));
+ }
+}
+
+static void scc_ide_outb(u8 addr, unsigned long port)
+{
+ out_be32((void*)port, addr);
+}
+
+static void scc_ide_outw(u16 addr, unsigned long port)
+{
+ out_be32((void*)port, addr);
+}
+
+static void
+scc_ide_outbsync(ide_drive_t * drive, u8 addr, unsigned long port)
+{
+ ide_hwif_t *hwif = HWIF(drive);
+
+ out_be32((void*)port, addr);
+ __asm__ __volatile__("eieio":::"memory");
+ in_be32((void*)(hwif->dma_base + 0x01c));
+ __asm__ __volatile__("eieio":::"memory");
+}
+
+static void
+scc_ide_outsw(unsigned long port, void *addr, u32 count)
+{
+ u16 *ptr = (u16 *)addr;
+ while (count--) {
+ out_be32((void*)port, cpu_to_le16(*ptr++));
+ }
+}
+
+static void
+scc_ide_outsl(unsigned long port, void *addr, u32 count)
+{
+ u16 *ptr = (u16 *)addr;
+ while (count--) {
+ out_be32((void*)port, cpu_to_le16(*ptr++));
+ out_be32((void*)port, cpu_to_le16(*ptr++));
+ }
+}
+
+/**
+ * scc_ratemask - Compute available modes
+ * @drive: IDE drive
+ *
+ * Compute the available speeds for the devices on the interface.
+ * Enforce UDMA33 as a limit if there is no 80pin cable present.
+ */
+
+static u8 scc_ratemask(ide_drive_t *drive)
+{
+ u8 mode = 4;
+
+ if (!eighty_ninty_three(drive))
+ mode = min(mode, (u8)1);
+ return mode;
+}
+
+/**
+ * scc_tuneproc - tune a drive PIO mode
+ * @drive: drive to tune
+ * @mode_wanted: the target operating mode
+ *
+ * Load the timing settings for this device mode into the
+ * controller.
+ */
+
+static void scc_tuneproc(ide_drive_t *drive, byte mode_wanted)
+{
+ ide_hwif_t *hwif = HWIF(drive);
+ struct scc_ports *ports = ide_get_hwifdata(hwif);
+ unsigned long ctl_base = ports->ctl;
+ unsigned long cckctrl_port = ctl_base + 0xff0;
+ unsigned long piosht_port = ctl_base + 0x000;
+ unsigned long pioct_port = ctl_base + 0x004;
+ unsigned long reg;
+ unsigned char speed = XFER_PIO_0;
+ int offset;
+
+ mode_wanted = ide_get_best_pio_mode(drive, mode_wanted, 4, NULL);
+ switch (mode_wanted) {
+ case 4:
+ speed = XFER_PIO_4;
+ break;
+ case 3:
+ speed = XFER_PIO_3;
+ break;
+ case 2:
+ speed = XFER_PIO_2;
+ break;
+ case 1:
+ speed = XFER_PIO_1;
+ break;
+ case 0:
+ default:
+ speed = XFER_PIO_0;
+ break;
+ }
+
+ reg = in_be32((void __iomem *)cckctrl_port);
+ if (reg & CCKCTRL_ATACLKOEN) {
+ offset = 1; /* 133MHz */
+ } else {
+ offset = 0; /* 100MHz */
+ }
+ reg = JCHSTtbl[offset][mode_wanted] << 16 | JCHHTtbl[offset][mode_wanted];
+ out_be32((void __iomem *)piosht_port, reg);
+ reg = JCHCTtbl[offset][mode_wanted];
+ out_be32((void __iomem *)pioct_port, reg);
+
+ ide_config_drive_speed(drive, speed);
+}
+
+/**
+ * scc_tune_chipset - tune a drive DMA mode
+ * @drive: Drive to set up
+ * @xferspeed: speed we want to achieve
+ *
+ * Load the timing settings for this device mode into the
+ * controller.
+ */
+
+static int scc_tune_chipset(ide_drive_t *drive, byte xferspeed)
+{
+ ide_hwif_t *hwif = HWIF(drive);
+ u8 speed = ide_rate_filter(scc_ratemask(drive), xferspeed);
+ struct scc_ports *ports = ide_get_hwifdata(hwif);
+ unsigned long ctl_base = ports->ctl;
+ unsigned long cckctrl_port = ctl_base + 0xff0;
+ unsigned long mdmact_port = ctl_base + 0x008;
+ unsigned long mcrcst_port = ctl_base + 0x00c;
+ unsigned long sdmact_port = ctl_base + 0x010;
+ unsigned long scrcst_port = ctl_base + 0x014;
+ unsigned long udenvt_port = ctl_base + 0x018;
+ unsigned long tdvhsel_port = ctl_base + 0x020;
+ int is_slave = (&hwif->drives[1] == drive);
+ int offset, idx;
+ unsigned long reg;
+ unsigned long jcactsel;
+
+ reg = in_be32((void __iomem *)cckctrl_port);
+ if (reg & CCKCTRL_ATACLKOEN) {
+ offset = 1; /* 133MHz */
+ } else {
+ offset = 0; /* 100MHz */
+ }
+
+ switch (speed) {
+ case XFER_UDMA_6:
+ idx = 6;
+ break;
+ case XFER_UDMA_5:
+ idx = 5;
+ break;
+ case XFER_UDMA_4:
+ idx = 4;
+ break;
+ case XFER_UDMA_3:
+ idx = 3;
+ break;
+ case XFER_UDMA_2:
+ idx = 2;
+ break;
+ case XFER_UDMA_1:
+ idx = 1;
+ break;
+ case XFER_UDMA_0:
+ idx = 0;
+ break;
+ default:
+ return 1;
+ }
+
+ jcactsel = JCACTSELtbl[offset][idx];
+ if (is_slave) {
+ out_be32((void __iomem *)sdmact_port, JCHDCTxtbl[offset][idx]);
+ out_be32((void __iomem *)scrcst_port, JCSTWTxtbl[offset][idx]);
+ jcactsel = jcactsel << 2;
+ out_be32((void __iomem *)tdvhsel_port, (in_be32((void __iomem *)tdvhsel_port) & ~TDVHSEL_SLAVE) | jcactsel);
+ } else {
+ out_be32((void __iomem *)mdmact_port, JCHDCTxtbl[offset][idx]);
+ out_be32((void __iomem *)mcrcst_port, JCSTWTxtbl[offset][idx]);
+ out_be32((void __iomem *)tdvhsel_port, (in_be32((void __iomem *)tdvhsel_port) & ~TDVHSEL_MASTER) | jcactsel);
+ }
+ reg = JCTSStbl[offset][idx] << 16 | JCENVTtbl[offset][idx];
+ out_be32((void __iomem *)udenvt_port, reg);
+
+ return ide_config_drive_speed(drive, speed);
+}
+
+/**
+ * scc_config_chipset_for_dma - configure for DMA
+ * @drive: drive to configure
+ *
+ * Called by scc_config_drive_for_dma().
+ */
+
+static int scc_config_chipset_for_dma(ide_drive_t *drive)
+{
+ u8 speed = ide_dma_speed(drive, scc_ratemask(drive));
+
+ if (!speed)
+ return 0;
+
+ if (scc_tune_chipset(drive, speed))
+ return 0;
+
+ return ide_dma_enable(drive);
+}
+
+/**
+ * scc_configure_drive_for_dma - set up for DMA transfers
+ * @drive: drive we are going to set up
+ *
+ * Set up the drive for DMA, tune the controller and drive as
+ * required.
+ * If the drive isn't suitable for DMA or we hit other problems
+ * then we will drop down to PIO and set up PIO appropriately.
+ * (return 1)
+ */
+
+static int scc_config_drive_for_dma(ide_drive_t *drive)
+{
+ if (ide_use_dma(drive) && scc_config_chipset_for_dma(drive))
+ return 0;
+
+ if (ide_use_fast_pio(drive))
+ scc_tuneproc(drive, 4);
+
+ return -1;
+}
+
+/**
+ * scc_ide_dma_setup - begin a DMA phase
+ * @drive: target device
+ *
+ * Build an IDE DMA PRD (IDE speak for scatter gather table)
+ * and then set up the DMA transfer registers.
+ *
+ * Returns 0 on success. If a PIO fallback is required then 1
+ * is returned.
+ */
+
+static int scc_dma_setup(ide_drive_t *drive)
+{
+ ide_hwif_t *hwif = drive->hwif;
+ struct request *rq = HWGROUP(drive)->rq;
+ unsigned int reading;
+ u8 dma_stat;
+
+ if (rq_data_dir(rq))
+ reading = 0;
+ else
+ reading = 1 << 3;
+
+ /* fall back to pio! */
+ if (!ide_build_dmatable(drive, rq)) {
+ ide_map_sg(drive, rq);
+ return 1;
+ }
+
+ /* PRD table */
+ out_be32((void __iomem *)hwif->dma_prdtable, hwif->dmatable_dma);
+
+ /* specify r/w */
+ out_be32((void __iomem *)hwif->dma_command, reading);
+
+ /* read dma_status for INTR & ERROR flags */
+ dma_stat = in_be32((void __iomem *)hwif->dma_status);
+
+ /* clear INTR & ERROR flags */
+ out_be32((void __iomem *)hwif->dma_status, dma_stat|6);
+ drive->waiting_for_dma = 1;
+ return 0;
+}
+
+
+/**
+ * scc_ide_dma_end - Stop DMA
+ * @drive: IDE drive
+ *
+ * Check and clear INT Status register.
+ * Then call __ide_dma_end().
+ */
+
+static int scc_ide_dma_end(ide_drive_t * drive)
+{
+ ide_hwif_t *hwif = HWIF(drive);
+ unsigned long intsts_port = hwif->dma_base + 0x014;
+ u32 reg;
+
+ while (1) {
+ reg = in_be32((void __iomem *)intsts_port);
+
+ if (reg & INTSTS_SERROR) {
+ printk(KERN_WARNING "%s: SERROR\n", SCC_PATA_NAME);
+ out_be32((void __iomem *)intsts_port, INTSTS_SERROR|INTSTS_BMSINT);
+
+ out_be32((void __iomem *)hwif->dma_command, in_be32((void __iomem *)hwif->dma_command) & ~QCHCD_IOS_SS);
+ continue;
+ }
+
+ if (reg & INTSTS_PRERR) {
+ u32 maea0, maec0;
+ unsigned long ctl_base = hwif->config_data;
+
+ maea0 = in_be32((void __iomem *)(ctl_base + 0xF50));
+ maec0 = in_be32((void __iomem *)(ctl_base + 0xF54));
+
+ printk(KERN_WARNING "%s: PRERR [addr:%x cmd:%x]\n", SCC_PATA_NAME, maea0, maec0);
+
+ out_be32((void __iomem *)intsts_port, INTSTS_PRERR|INTSTS_BMSINT);
+
+ out_be32((void __iomem *)hwif->dma_command, in_be32((void __iomem *)hwif->dma_command) & ~QCHCD_IOS_SS);
+ continue;
+ }
+
+ if (reg & INTSTS_RERR) {
+ printk(KERN_WARNING "%s: Response Error\n", SCC_PATA_NAME);
+ out_be32((void __iomem *)intsts_port, INTSTS_RERR|INTSTS_BMSINT);
+
+ out_be32((void __iomem *)hwif->dma_command, in_be32((void __iomem *)hwif->dma_command) & ~QCHCD_IOS_SS);
+ continue;
+ }
+
+ if (reg & INTSTS_ICERR) {
+ out_be32((void __iomem *)hwif->dma_command, in_be32((void __iomem *)hwif->dma_command) & ~QCHCD_IOS_SS);
+
+ printk(KERN_WARNING "%s: Illegal Configuration\n", SCC_PATA_NAME);
+ out_be32((void __iomem *)intsts_port, INTSTS_ICERR|INTSTS_BMSINT);
+ continue;
+ }
+
+ if (reg & INTSTS_BMSINT) {
+ printk(KERN_WARNING "%s: Internal Bus Error\n", SCC_PATA_NAME);
+ out_be32((void __iomem *)intsts_port, INTSTS_BMSINT);
+
+ ide_do_reset(drive);
+ continue;
+ }
+
+ if (reg & INTSTS_BMHE) {
+ out_be32((void __iomem *)intsts_port, INTSTS_BMHE);
+ continue;
+ }
+
+ if (reg & INTSTS_ACTEINT) {
+ out_be32((void __iomem *)intsts_port, INTSTS_ACTEINT);
+ continue;
+ }
+
+ if (reg & INTSTS_IOIRQS) {
+ out_be32((void __iomem *)intsts_port, INTSTS_IOIRQS);
+ continue;
+ }
+ break;
+ }
+
+ return __ide_dma_end(drive);
+}
+
+/**
+ * setup_mmio_scc - map CTRL/BMID region
+ * @dev: PCI device we are configuring
+ * @name: device name
+ *
+ */
+
+static int setup_mmio_scc (struct pci_dev *dev, const char *name)
+{
+ unsigned long ctl_base = pci_resource_start(dev, 0);
+ unsigned long dma_base = pci_resource_start(dev, 1);
+ unsigned long ctl_size = pci_resource_len(dev, 0);
+ unsigned long dma_size = pci_resource_len(dev, 1);
+ void *ctl_addr;
+ void *dma_addr;
+ int i;
+
+ for (i = 0; i < MAX_HWIFS; i++) {
+ if (scc_ports[i].ctl == 0)
+ break;
+ }
+ if (i >= MAX_HWIFS)
+ return -ENOMEM;
+
+ if (!request_mem_region(ctl_base, ctl_size, name)) {
+ printk(KERN_WARNING "%s: IDE controller MMIO ports not available.\n", SCC_PATA_NAME);
+ goto fail_0;
+ }
+
+ if (!request_mem_region(dma_base, dma_size, name)) {
+ printk(KERN_WARNING "%s: IDE controller MMIO ports not available.\n", SCC_PATA_NAME);
+ goto fail_1;
+ }
+
+ if ((ctl_addr = ioremap(ctl_base, ctl_size)) == NULL)
+ goto fail_2;
+
+ if ((dma_addr = ioremap(dma_base, dma_size)) == NULL)
+ goto fail_3;
+
+ pci_set_master(dev);
+ scc_ports[i].ctl = (unsigned long)ctl_addr;
+ scc_ports[i].dma = (unsigned long)dma_addr;
+ pci_set_drvdata(dev, (void *) &scc_ports[i]);
+
+ return 1;
+
+ fail_3:
+ iounmap(ctl_addr);
+ fail_2:
+ release_mem_region(dma_base, dma_size);
+ fail_1:
+ release_mem_region(ctl_base, ctl_size);
+ fail_0:
+ return -ENOMEM;
+}
+
+/**
+ * init_setup_scc - set up an SCC PATA Controller
+ * @dev: PCI device
+ * @d: IDE PCI device
+ *
+ * Perform the initial set up for this device.
+ */
+
+static int __devinit init_setup_scc(struct pci_dev *dev, ide_pci_device_t *d)
+{
+ unsigned long ctl_base;
+ unsigned long dma_base;
+ unsigned long cckctrl_port;
+ unsigned long intmask_port;
+ unsigned long mode_port;
+ unsigned long ecmode_port;
+ unsigned long dma_status_port;
+ u32 reg = 0;
+ struct scc_ports *ports;
+ int rc;
+
+ rc = setup_mmio_scc(dev, d->name);
+ if (rc < 0) {
+ return rc;
+ }
+
+ ports = pci_get_drvdata(dev);
+ ctl_base = ports->ctl;
+ dma_base = ports->dma;
+ cckctrl_port = ctl_base + 0xff0;
+ intmask_port = dma_base + 0x010;
+ mode_port = ctl_base + 0x024;
+ ecmode_port = ctl_base + 0xf00;
+ dma_status_port = dma_base + 0x004;
+
+ /* controller initialization */
+ reg = 0;
+ out_be32((void*)cckctrl_port, reg);
+ reg |= CCKCTRL_ATACLKOEN;
+ out_be32((void*)cckctrl_port, reg);
+ reg |= CCKCTRL_LCLKEN | CCKCTRL_OCLKEN;
+ out_be32((void*)cckctrl_port, reg);
+ reg |= CCKCTRL_CRST;
+ out_be32((void*)cckctrl_port, reg);
+
+ for (;;) {
+ reg = in_be32((void*)cckctrl_port);
+ if (reg & CCKCTRL_CRST)
+ break;
+ udelay(5000);
+ }
+
+ reg |= CCKCTRL_ATARESET;
+ out_be32((void*)cckctrl_port, reg);
+
+ out_be32((void*)ecmode_port, ECMODE_VALUE);
+ out_be32((void*)mode_port, MODE_JCUSFEN);
+ out_be32((void*)intmask_port, INTMASK_MSK);
+
+ return ide_setup_pci_device(dev, d);
+}
+
+/**
+ * init_mmio_iops_scc - set up the iops for MMIO
+ * @hwif: interface to set up
+ *
+ */
+
+static void __devinit init_mmio_iops_scc(ide_hwif_t *hwif)
+{
+ struct pci_dev *dev = hwif->pci_dev;
+ struct scc_ports *ports = pci_get_drvdata(dev);
+ unsigned long dma_base = ports->dma;
+
+ ide_set_hwifdata(hwif, ports);
+
+ hwif->INB = scc_ide_inb;
+ hwif->INW = scc_ide_inw;
+ hwif->INSW = scc_ide_insw;
+ hwif->INSL = scc_ide_insl;
+ hwif->OUTB = scc_ide_outb;
+ hwif->OUTBSYNC = scc_ide_outbsync;
+ hwif->OUTW = scc_ide_outw;
+ hwif->OUTSW = scc_ide_outsw;
+ hwif->OUTSL = scc_ide_outsl;
+
+ hwif->io_ports[IDE_DATA_OFFSET] = dma_base + 0x20;
+ hwif->io_ports[IDE_ERROR_OFFSET] = dma_base + 0x24;
+ hwif->io_ports[IDE_NSECTOR_OFFSET] = dma_base + 0x28;
+ hwif->io_ports[IDE_SECTOR_OFFSET] = dma_base + 0x2c;
+ hwif->io_ports[IDE_LCYL_OFFSET] = dma_base + 0x30;
+ hwif->io_ports[IDE_HCYL_OFFSET] = dma_base + 0x34;
+ hwif->io_ports[IDE_SELECT_OFFSET] = dma_base + 0x38;
+ hwif->io_ports[IDE_STATUS_OFFSET] = dma_base + 0x3c;
+ hwif->io_ports[IDE_CONTROL_OFFSET] = dma_base + 0x40;
+
+ hwif->irq = hwif->pci_dev->irq;
+ hwif->dma_base = dma_base;
+ hwif->config_data = ports->ctl;
+ hwif->mmio = 1;
+}
+
+/**
+ * init_iops_scc - set up iops
+ * @hwif: interface to set up
+ *
+ * Do the basic setup for the SCC hardware interface
+ * and then do the MMIO setup.
+ */
+
+static void __devinit init_iops_scc(ide_hwif_t *hwif)
+{
+ struct pci_dev *dev = hwif->pci_dev;
+ hwif->hwif_data = NULL;
+ if (pci_get_drvdata(dev) == NULL)
+ return;
+ init_mmio_iops_scc(hwif);
+}
+
+/**
+ * init_hwif_scc - set up hwif
+ * @hwif: interface to set up
+ *
+ * We do the basic set up of the interface structure. The SCC
+ * requires several custom handlers so we override the default
+ * ide DMA handlers appropriately.
+ */
+
+static void __devinit init_hwif_scc(ide_hwif_t *hwif)
+{
+ struct scc_ports *ports = ide_get_hwifdata(hwif);
+
+ ports->hwif_id = hwif->index;
+
+ hwif->dma_command = hwif->dma_base;
+ hwif->dma_status = hwif->dma_base + 0x04;
+ hwif->dma_prdtable = hwif->dma_base + 0x08;
+
+ /* PTERADD */
+ out_be32((void __iomem *)(hwif->dma_base + 0x018), hwif->dmatable_dma);
+
+ hwif->dma_setup = scc_dma_setup;
+ hwif->ide_dma_end = scc_ide_dma_end;
+ hwif->speedproc = scc_tune_chipset;
+ hwif->tuneproc = scc_tuneproc;
+ hwif->ide_dma_check = scc_config_drive_for_dma;
+
+ hwif->drives[0].autotune = IDE_TUNE_AUTO;
+ hwif->drives[1].autotune = IDE_TUNE_AUTO;
+
+ if (in_be32((void __iomem *)(hwif->config_data + 0xff0)) & CCKCTRL_ATACLKOEN) {
+ hwif->ultra_mask = 0x7f; /* 133MHz */
+ } else {
+ hwif->ultra_mask = 0x3f; /* 100MHz */
+ }
+ hwif->mwdma_mask = 0x00;
+ hwif->swdma_mask = 0x00;
+ hwif->atapi_dma = 1;
+
+ /* we support 80c cable only. */
+ hwif->udma_four = 1;
+
+ hwif->autodma = 0;
+ if (!noautodma)
+ hwif->autodma = 1;
+ hwif->drives[0].autodma = hwif->autodma;
+ hwif->drives[1].autodma = hwif->autodma;
+}
+
+#define DECLARE_SCC_DEV(name_str) \
+ { \
+ .name = name_str, \
+ .init_setup = init_setup_scc, \
+ .init_iops = init_iops_scc, \
+ .init_hwif = init_hwif_scc, \
+ .channels = 1, \
+ .autodma = AUTODMA, \
+ .bootable = ON_BOARD, \
+ }
+
+static ide_pci_device_t scc_chipsets[] __devinitdata = {
+ /* 0 */ DECLARE_SCC_DEV("sccIDE"),
+};
+
+/**
+ * scc_init_one - pci layer discovery entry
+ * @dev: PCI device
+ * @id: ident table entry
+ *
+ * Called by the PCI code when it finds an SCC PATA controller.
+ * We then use the IDE PCI generic helper to do most of the work.
+ */
+
+static int __devinit scc_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+{
+ ide_pci_device_t *d = &scc_chipsets[id->driver_data];
+ return d->init_setup(dev, d);
+}
+
+/**
+ * scc_remove - pci layer remove entry
+ * @dev: PCI device
+ *
+ * Called by the PCI code when it removes an SCC PATA controller.
+ */
+
+static void __devexit scc_remove(struct pci_dev *dev)
+{
+ struct scc_ports *ports = pci_get_drvdata(dev);
+ ide_hwif_t *hwif = &ide_hwifs[ports->hwif_id];
+ unsigned long ctl_base = pci_resource_start(dev, 0);
+ unsigned long dma_base = pci_resource_start(dev, 1);
+ unsigned long ctl_size = pci_resource_len(dev, 0);
+ unsigned long dma_size = pci_resource_len(dev, 1);
+
+ if (hwif->dmatable_cpu) {
+ pci_free_consistent(hwif->pci_dev,
+ PRD_ENTRIES * PRD_BYTES,
+ hwif->dmatable_cpu,
+ hwif->dmatable_dma);
+ hwif->dmatable_cpu = NULL;
+ }
+
+ ide_unregister(hwif->index);
+
+ hwif->chipset = ide_unknown;
+ iounmap((void*)ports->dma);
+ iounmap((void*)ports->ctl);
+ release_mem_region(dma_base, dma_size);
+ release_mem_region(ctl_base, ctl_size);
+ memset(ports, 0, sizeof(*ports));
+}
+
+static struct pci_device_id scc_pci_tbl[] = {
+ { PCI_VENDOR_ID_TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_SCC_ATA, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+ { 0, },
+};
+MODULE_DEVICE_TABLE(pci, scc_pci_tbl);
+
+static struct pci_driver driver = {
+ .name = "SCC IDE",
+ .id_table = scc_pci_tbl,
+ .probe = scc_init_one,
+ .remove = scc_remove,
+};
+
+static int scc_ide_init(void)
+{
+ return ide_pci_register_driver(&driver);
+}
+
+module_init(scc_ide_init);
+/* -- No exit code?
+static void scc_ide_exit(void)
+{
+ ide_pci_unregister_driver(&driver);
+}
+module_exit(scc_ide_exit);
+ */
+
+
+MODULE_DESCRIPTION("PCI driver module for Toshiba SCC IDE");
+MODULE_LICENSE("GPL");
diff --git a/drivers/ieee1394/ieee1394-ioctl.h b/drivers/ieee1394/ieee1394-ioctl.h
index 8f20750..46878fe 100644
--- a/drivers/ieee1394/ieee1394-ioctl.h
+++ b/drivers/ieee1394/ieee1394-ioctl.h
@@ -100,5 +100,7 @@
_IO ('#', 0x28)
#define RAW1394_IOC_ISO_RECV_FLUSH \
_IO ('#', 0x29)
+#define RAW1394_IOC_GET_CYCLE_TIMER \
+ _IOR ('#', 0x30, struct raw1394_cycle_timer)
#endif /* __IEEE1394_IOCTL_H */
diff --git a/drivers/ieee1394/ieee1394_core.c b/drivers/ieee1394/ieee1394_core.c
index 1521e57..d791d08 100644
--- a/drivers/ieee1394/ieee1394_core.c
+++ b/drivers/ieee1394/ieee1394_core.c
@@ -33,7 +33,10 @@
#include <linux/skbuff.h>
#include <linux/suspend.h>
#include <linux/kthread.h>
+#include <linux/preempt.h>
+#include <linux/time.h>
+#include <asm/system.h>
#include <asm/byteorder.h>
#include "ieee1394_types.h"
@@ -186,6 +189,45 @@
}
}
+/**
+ * hpsb_read_cycle_timer - read cycle timer register and system time
+ * @host: host whose isochronous cycle timer register is read
+ * @cycle_timer: address of bitfield to return the register contents
+ * @local_time: address to return the system time
+ *
+ * The format of * @cycle_timer, is described in OHCI 1.1 clause 5.13. This
+ * format is also read from non-OHCI controllers. * @local_time contains the
+ * system time in microseconds since the Epoch, read at the moment when the
+ * cycle timer was read.
+ *
+ * Return value: 0 for success or error number otherwise.
+ */
+int hpsb_read_cycle_timer(struct hpsb_host *host, u32 *cycle_timer,
+ u64 *local_time)
+{
+ int ctr;
+ struct timeval tv;
+ unsigned long flags;
+
+ if (!host || !cycle_timer || !local_time)
+ return -EINVAL;
+
+ preempt_disable();
+ local_irq_save(flags);
+
+ ctr = host->driver->devctl(host, GET_CYCLE_COUNTER, 0);
+ if (ctr)
+ do_gettimeofday(&tv);
+
+ local_irq_restore(flags);
+ preempt_enable();
+
+ if (!ctr)
+ return -EIO;
+ *cycle_timer = ctr;
+ *local_time = tv.tv_sec * 1000000ULL + tv.tv_usec;
+ return 0;
+}
int hpsb_bus_reset(struct hpsb_host *host)
{
@@ -1190,6 +1232,7 @@
EXPORT_SYMBOL(hpsb_free_packet);
EXPORT_SYMBOL(hpsb_send_packet);
EXPORT_SYMBOL(hpsb_reset_bus);
+EXPORT_SYMBOL(hpsb_read_cycle_timer);
EXPORT_SYMBOL(hpsb_bus_reset);
EXPORT_SYMBOL(hpsb_selfid_received);
EXPORT_SYMBOL(hpsb_selfid_complete);
diff --git a/drivers/ieee1394/ieee1394_core.h b/drivers/ieee1394/ieee1394_core.h
index 536ba3f..bd29d8e 100644
--- a/drivers/ieee1394/ieee1394_core.h
+++ b/drivers/ieee1394/ieee1394_core.h
@@ -127,6 +127,9 @@
* progress, 0 otherwise. */
int hpsb_reset_bus(struct hpsb_host *host, int type);
+int hpsb_read_cycle_timer(struct hpsb_host *host, u32 *cycle_timer,
+ u64 *local_time);
+
/*
* The following functions are exported for host driver module usage. All of
* them are safe to use in interrupt contexts, although some are quite
diff --git a/drivers/ieee1394/nodemgr.c b/drivers/ieee1394/nodemgr.c
index ba9faef..c5ace19 100644
--- a/drivers/ieee1394/nodemgr.c
+++ b/drivers/ieee1394/nodemgr.c
@@ -1681,7 +1681,8 @@
for (;;) {
/* Sleep until next bus reset */
set_current_state(TASK_INTERRUPTIBLE);
- if (get_hpsb_generation(host) == generation)
+ if (get_hpsb_generation(host) == generation &&
+ !kthread_should_stop())
schedule();
__set_current_state(TASK_RUNNING);
diff --git a/drivers/ieee1394/raw1394.c b/drivers/ieee1394/raw1394.c
index aa9ca83..bb897a3 100644
--- a/drivers/ieee1394/raw1394.c
+++ b/drivers/ieee1394/raw1394.c
@@ -2669,6 +2669,18 @@
fi->iso_state = RAW1394_ISO_INACTIVE;
}
+static int raw1394_read_cycle_timer(struct file_info *fi, void __user * uaddr)
+{
+ struct raw1394_cycle_timer ct;
+ int err;
+
+ err = hpsb_read_cycle_timer(fi->host, &ct.cycle_timer, &ct.local_time);
+ if (!err)
+ if (copy_to_user(uaddr, &ct, sizeof(ct)))
+ err = -EFAULT;
+ return err;
+}
+
/* mmap the rawiso xmit/recv buffer */
static int raw1394_mmap(struct file *file, struct vm_area_struct *vma)
{
@@ -2777,6 +2789,14 @@
break;
}
+ /* state-independent commands */
+ switch(cmd) {
+ case RAW1394_IOC_GET_CYCLE_TIMER:
+ return raw1394_read_cycle_timer(fi, argp);
+ default:
+ break;
+ }
+
return -EINVAL;
}
diff --git a/drivers/ieee1394/raw1394.h b/drivers/ieee1394/raw1394.h
index 35bfc38..7bd22ee 100644
--- a/drivers/ieee1394/raw1394.h
+++ b/drivers/ieee1394/raw1394.h
@@ -178,4 +178,14 @@
__s16 xmit_cycle;
};
+/* argument to RAW1394_IOC_GET_CYCLE_TIMER ioctl */
+struct raw1394_cycle_timer {
+ /* contents of Isochronous Cycle Timer register,
+ as in OHCI 1.1 clause 5.13 (also with non-OHCI hosts) */
+ __u32 cycle_timer;
+
+ /* local time in microseconds since Epoch,
+ simultaneously read with cycle timer */
+ __u64 local_time;
+};
#endif /* IEEE1394_RAW1394_H */
diff --git a/drivers/infiniband/core/Makefile b/drivers/infiniband/core/Makefile
index 50fb1cd..189e5d4 100644
--- a/drivers/infiniband/core/Makefile
+++ b/drivers/infiniband/core/Makefile
@@ -12,7 +12,7 @@
ib_mad-y := mad.o smi.o agent.o mad_rmpp.o
-ib_sa-y := sa_query.o
+ib_sa-y := sa_query.o multicast.o
ib_cm-y := cm.o
diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c
index db88e60..f8d69b3 100644
--- a/drivers/infiniband/core/cma.c
+++ b/drivers/infiniband/core/cma.c
@@ -71,6 +71,7 @@
static DEFINE_IDR(sdp_ps);
static DEFINE_IDR(tcp_ps);
static DEFINE_IDR(udp_ps);
+static DEFINE_IDR(ipoib_ps);
static int next_port;
struct cma_device {
@@ -116,6 +117,7 @@
struct list_head list;
struct list_head listen_list;
struct cma_device *cma_dev;
+ struct list_head mc_list;
enum cma_state state;
spinlock_t lock;
@@ -134,10 +136,23 @@
} cm_id;
u32 seq_num;
+ u32 qkey;
u32 qp_num;
u8 srq;
};
+struct cma_multicast {
+ struct rdma_id_private *id_priv;
+ union {
+ struct ib_sa_multicast *ib;
+ } multicast;
+ struct list_head list;
+ void *context;
+ struct sockaddr addr;
+ u8 pad[sizeof(struct sockaddr_in6) -
+ sizeof(struct sockaddr)];
+};
+
struct cma_work {
struct work_struct work;
struct rdma_id_private *id;
@@ -243,6 +258,11 @@
hh->ip_version = (ip_ver << 4) | (hh->ip_version & 0xF);
}
+static inline int cma_is_ud_ps(enum rdma_port_space ps)
+{
+ return (ps == RDMA_PS_UDP || ps == RDMA_PS_IPOIB);
+}
+
static void cma_attach_to_dev(struct rdma_id_private *id_priv,
struct cma_device *cma_dev)
{
@@ -265,19 +285,41 @@
id_priv->cma_dev = NULL;
}
+static int cma_set_qkey(struct ib_device *device, u8 port_num,
+ enum rdma_port_space ps,
+ struct rdma_dev_addr *dev_addr, u32 *qkey)
+{
+ struct ib_sa_mcmember_rec rec;
+ int ret = 0;
+
+ switch (ps) {
+ case RDMA_PS_UDP:
+ *qkey = RDMA_UDP_QKEY;
+ break;
+ case RDMA_PS_IPOIB:
+ ib_addr_get_mgid(dev_addr, &rec.mgid);
+ ret = ib_sa_get_mcmember_rec(device, port_num, &rec.mgid, &rec);
+ *qkey = be32_to_cpu(rec.qkey);
+ break;
+ default:
+ break;
+ }
+ return ret;
+}
+
static int cma_acquire_dev(struct rdma_id_private *id_priv)
{
- enum rdma_node_type dev_type = id_priv->id.route.addr.dev_addr.dev_type;
+ struct rdma_dev_addr *dev_addr = &id_priv->id.route.addr.dev_addr;
struct cma_device *cma_dev;
union ib_gid gid;
int ret = -ENODEV;
- switch (rdma_node_get_transport(dev_type)) {
+ switch (rdma_node_get_transport(dev_addr->dev_type)) {
case RDMA_TRANSPORT_IB:
- ib_addr_get_sgid(&id_priv->id.route.addr.dev_addr, &gid);
+ ib_addr_get_sgid(dev_addr, &gid);
break;
case RDMA_TRANSPORT_IWARP:
- iw_addr_get_sgid(&id_priv->id.route.addr.dev_addr, &gid);
+ iw_addr_get_sgid(dev_addr, &gid);
break;
default:
return -ENODEV;
@@ -287,7 +329,12 @@
ret = ib_find_cached_gid(cma_dev->device, &gid,
&id_priv->id.port_num, NULL);
if (!ret) {
- cma_attach_to_dev(id_priv, cma_dev);
+ ret = cma_set_qkey(cma_dev->device,
+ id_priv->id.port_num,
+ id_priv->id.ps, dev_addr,
+ &id_priv->qkey);
+ if (!ret)
+ cma_attach_to_dev(id_priv, cma_dev);
break;
}
}
@@ -325,40 +372,50 @@
init_waitqueue_head(&id_priv->wait_remove);
atomic_set(&id_priv->dev_remove, 0);
INIT_LIST_HEAD(&id_priv->listen_list);
+ INIT_LIST_HEAD(&id_priv->mc_list);
get_random_bytes(&id_priv->seq_num, sizeof id_priv->seq_num);
return &id_priv->id;
}
EXPORT_SYMBOL(rdma_create_id);
-static int cma_init_ib_qp(struct rdma_id_private *id_priv, struct ib_qp *qp)
+static int cma_init_ud_qp(struct rdma_id_private *id_priv, struct ib_qp *qp)
{
struct ib_qp_attr qp_attr;
- struct rdma_dev_addr *dev_addr;
- int ret;
+ int qp_attr_mask, ret;
- dev_addr = &id_priv->id.route.addr.dev_addr;
- ret = ib_find_cached_pkey(id_priv->id.device, id_priv->id.port_num,
- ib_addr_get_pkey(dev_addr),
- &qp_attr.pkey_index);
+ qp_attr.qp_state = IB_QPS_INIT;
+ ret = rdma_init_qp_attr(&id_priv->id, &qp_attr, &qp_attr_mask);
if (ret)
return ret;
- qp_attr.qp_state = IB_QPS_INIT;
- qp_attr.qp_access_flags = 0;
- qp_attr.port_num = id_priv->id.port_num;
- return ib_modify_qp(qp, &qp_attr, IB_QP_STATE | IB_QP_ACCESS_FLAGS |
- IB_QP_PKEY_INDEX | IB_QP_PORT);
+ ret = ib_modify_qp(qp, &qp_attr, qp_attr_mask);
+ if (ret)
+ return ret;
+
+ qp_attr.qp_state = IB_QPS_RTR;
+ ret = ib_modify_qp(qp, &qp_attr, IB_QP_STATE);
+ if (ret)
+ return ret;
+
+ qp_attr.qp_state = IB_QPS_RTS;
+ qp_attr.sq_psn = 0;
+ ret = ib_modify_qp(qp, &qp_attr, IB_QP_STATE | IB_QP_SQ_PSN);
+
+ return ret;
}
-static int cma_init_iw_qp(struct rdma_id_private *id_priv, struct ib_qp *qp)
+static int cma_init_conn_qp(struct rdma_id_private *id_priv, struct ib_qp *qp)
{
struct ib_qp_attr qp_attr;
+ int qp_attr_mask, ret;
qp_attr.qp_state = IB_QPS_INIT;
- qp_attr.qp_access_flags = IB_ACCESS_LOCAL_WRITE;
+ ret = rdma_init_qp_attr(&id_priv->id, &qp_attr, &qp_attr_mask);
+ if (ret)
+ return ret;
- return ib_modify_qp(qp, &qp_attr, IB_QP_STATE | IB_QP_ACCESS_FLAGS);
+ return ib_modify_qp(qp, &qp_attr, qp_attr_mask);
}
int rdma_create_qp(struct rdma_cm_id *id, struct ib_pd *pd,
@@ -376,18 +433,10 @@
if (IS_ERR(qp))
return PTR_ERR(qp);
- switch (rdma_node_get_transport(id->device->node_type)) {
- case RDMA_TRANSPORT_IB:
- ret = cma_init_ib_qp(id_priv, qp);
- break;
- case RDMA_TRANSPORT_IWARP:
- ret = cma_init_iw_qp(id_priv, qp);
- break;
- default:
- ret = -ENOSYS;
- break;
- }
-
+ if (cma_is_ud_ps(id_priv->id.ps))
+ ret = cma_init_ud_qp(id_priv, qp);
+ else
+ ret = cma_init_conn_qp(id_priv, qp);
if (ret)
goto err;
@@ -460,23 +509,55 @@
return ib_modify_qp(id->qp, &qp_attr, IB_QP_STATE);
}
+static int cma_ib_init_qp_attr(struct rdma_id_private *id_priv,
+ struct ib_qp_attr *qp_attr, int *qp_attr_mask)
+{
+ struct rdma_dev_addr *dev_addr = &id_priv->id.route.addr.dev_addr;
+ int ret;
+
+ ret = ib_find_cached_pkey(id_priv->id.device, id_priv->id.port_num,
+ ib_addr_get_pkey(dev_addr),
+ &qp_attr->pkey_index);
+ if (ret)
+ return ret;
+
+ qp_attr->port_num = id_priv->id.port_num;
+ *qp_attr_mask = IB_QP_STATE | IB_QP_PKEY_INDEX | IB_QP_PORT;
+
+ if (cma_is_ud_ps(id_priv->id.ps)) {
+ qp_attr->qkey = id_priv->qkey;
+ *qp_attr_mask |= IB_QP_QKEY;
+ } else {
+ qp_attr->qp_access_flags = 0;
+ *qp_attr_mask |= IB_QP_ACCESS_FLAGS;
+ }
+ return 0;
+}
+
int rdma_init_qp_attr(struct rdma_cm_id *id, struct ib_qp_attr *qp_attr,
int *qp_attr_mask)
{
struct rdma_id_private *id_priv;
- int ret;
+ int ret = 0;
id_priv = container_of(id, struct rdma_id_private, id);
switch (rdma_node_get_transport(id_priv->id.device->node_type)) {
case RDMA_TRANSPORT_IB:
- ret = ib_cm_init_qp_attr(id_priv->cm_id.ib, qp_attr,
- qp_attr_mask);
+ if (!id_priv->cm_id.ib || cma_is_ud_ps(id_priv->id.ps))
+ ret = cma_ib_init_qp_attr(id_priv, qp_attr, qp_attr_mask);
+ else
+ ret = ib_cm_init_qp_attr(id_priv->cm_id.ib, qp_attr,
+ qp_attr_mask);
if (qp_attr->qp_state == IB_QPS_RTR)
qp_attr->rq_psn = id_priv->seq_num;
break;
case RDMA_TRANSPORT_IWARP:
- ret = iw_cm_init_qp_attr(id_priv->cm_id.iw, qp_attr,
- qp_attr_mask);
+ if (!id_priv->cm_id.iw) {
+ qp_attr->qp_access_flags = IB_ACCESS_LOCAL_WRITE;
+ *qp_attr_mask = IB_QP_STATE | IB_QP_ACCESS_FLAGS;
+ } else
+ ret = iw_cm_init_qp_attr(id_priv->cm_id.iw, qp_attr,
+ qp_attr_mask);
break;
default:
ret = -ENOSYS;
@@ -698,6 +779,19 @@
mutex_unlock(&lock);
}
+static void cma_leave_mc_groups(struct rdma_id_private *id_priv)
+{
+ struct cma_multicast *mc;
+
+ while (!list_empty(&id_priv->mc_list)) {
+ mc = container_of(id_priv->mc_list.next,
+ struct cma_multicast, list);
+ list_del(&mc->list);
+ ib_sa_free_multicast(mc->multicast.ib);
+ kfree(mc);
+ }
+}
+
void rdma_destroy_id(struct rdma_cm_id *id)
{
struct rdma_id_private *id_priv;
@@ -722,6 +816,7 @@
default:
break;
}
+ cma_leave_mc_groups(id_priv);
mutex_lock(&lock);
cma_detach_from_dev(id_priv);
}
@@ -972,7 +1067,7 @@
memset(&event, 0, sizeof event);
offset = cma_user_data_offset(listen_id->id.ps);
event.event = RDMA_CM_EVENT_CONNECT_REQUEST;
- if (listen_id->id.ps == RDMA_PS_UDP) {
+ if (cma_is_ud_ps(listen_id->id.ps)) {
conn_id = cma_new_udp_id(&listen_id->id, ib_event);
event.param.ud.private_data = ib_event->private_data + offset;
event.param.ud.private_data_len =
@@ -1725,7 +1820,7 @@
struct rdma_bind_list *bind_list;
int port, ret;
- bind_list = kzalloc(sizeof *bind_list, GFP_KERNEL);
+ bind_list = kmalloc(sizeof *bind_list, GFP_KERNEL);
if (!bind_list)
return -ENOMEM;
@@ -1847,6 +1942,9 @@
case RDMA_PS_UDP:
ps = &udp_ps;
break;
+ case RDMA_PS_IPOIB:
+ ps = &ipoib_ps;
+ break;
default:
return -EPROTONOSUPPORT;
}
@@ -1961,7 +2059,7 @@
event.status = ib_event->param.sidr_rep_rcvd.status;
break;
}
- if (rep->qkey != RDMA_UD_QKEY) {
+ if (id_priv->qkey != rep->qkey) {
event.event = RDMA_CM_EVENT_UNREACHABLE;
event.status = -EINVAL;
break;
@@ -2160,7 +2258,7 @@
switch (rdma_node_get_transport(id->device->node_type)) {
case RDMA_TRANSPORT_IB:
- if (id->ps == RDMA_PS_UDP)
+ if (cma_is_ud_ps(id->ps))
ret = cma_resolve_ib_udp(id_priv, conn_param);
else
ret = cma_connect_ib(id_priv, conn_param);
@@ -2256,7 +2354,7 @@
rep.status = status;
if (status == IB_SIDR_SUCCESS) {
rep.qp_num = id_priv->qp_num;
- rep.qkey = RDMA_UD_QKEY;
+ rep.qkey = id_priv->qkey;
}
rep.private_data = private_data;
rep.private_data_len = private_data_len;
@@ -2280,7 +2378,7 @@
switch (rdma_node_get_transport(id->device->node_type)) {
case RDMA_TRANSPORT_IB:
- if (id->ps == RDMA_PS_UDP)
+ if (cma_is_ud_ps(id->ps))
ret = cma_send_sidr_rep(id_priv, IB_SIDR_SUCCESS,
conn_param->private_data,
conn_param->private_data_len);
@@ -2341,7 +2439,7 @@
switch (rdma_node_get_transport(id->device->node_type)) {
case RDMA_TRANSPORT_IB:
- if (id->ps == RDMA_PS_UDP)
+ if (cma_is_ud_ps(id->ps))
ret = cma_send_sidr_rep(id_priv, IB_SIDR_REJECT,
private_data, private_data_len);
else
@@ -2392,6 +2490,178 @@
}
EXPORT_SYMBOL(rdma_disconnect);
+static int cma_ib_mc_handler(int status, struct ib_sa_multicast *multicast)
+{
+ struct rdma_id_private *id_priv;
+ struct cma_multicast *mc = multicast->context;
+ struct rdma_cm_event event;
+ int ret;
+
+ id_priv = mc->id_priv;
+ atomic_inc(&id_priv->dev_remove);
+ if (!cma_comp(id_priv, CMA_ADDR_BOUND) &&
+ !cma_comp(id_priv, CMA_ADDR_RESOLVED))
+ goto out;
+
+ if (!status && id_priv->id.qp)
+ status = ib_attach_mcast(id_priv->id.qp, &multicast->rec.mgid,
+ multicast->rec.mlid);
+
+ memset(&event, 0, sizeof event);
+ event.status = status;
+ event.param.ud.private_data = mc->context;
+ if (!status) {
+ event.event = RDMA_CM_EVENT_MULTICAST_JOIN;
+ ib_init_ah_from_mcmember(id_priv->id.device,
+ id_priv->id.port_num, &multicast->rec,
+ &event.param.ud.ah_attr);
+ event.param.ud.qp_num = 0xFFFFFF;
+ event.param.ud.qkey = be32_to_cpu(multicast->rec.qkey);
+ } else
+ event.event = RDMA_CM_EVENT_MULTICAST_ERROR;
+
+ ret = id_priv->id.event_handler(&id_priv->id, &event);
+ if (ret) {
+ cma_exch(id_priv, CMA_DESTROYING);
+ cma_release_remove(id_priv);
+ rdma_destroy_id(&id_priv->id);
+ return 0;
+ }
+out:
+ cma_release_remove(id_priv);
+ return 0;
+}
+
+static void cma_set_mgid(struct rdma_id_private *id_priv,
+ struct sockaddr *addr, union ib_gid *mgid)
+{
+ unsigned char mc_map[MAX_ADDR_LEN];
+ struct rdma_dev_addr *dev_addr = &id_priv->id.route.addr.dev_addr;
+ struct sockaddr_in *sin = (struct sockaddr_in *) addr;
+ struct sockaddr_in6 *sin6 = (struct sockaddr_in6 *) addr;
+
+ if (cma_any_addr(addr)) {
+ memset(mgid, 0, sizeof *mgid);
+ } else if ((addr->sa_family == AF_INET6) &&
+ ((be32_to_cpu(sin6->sin6_addr.s6_addr32[0]) & 0xFF10A01B) ==
+ 0xFF10A01B)) {
+ /* IPv6 address is an SA assigned MGID. */
+ memcpy(mgid, &sin6->sin6_addr, sizeof *mgid);
+ } else {
+ ip_ib_mc_map(sin->sin_addr.s_addr, mc_map);
+ if (id_priv->id.ps == RDMA_PS_UDP)
+ mc_map[7] = 0x01; /* Use RDMA CM signature */
+ mc_map[8] = ib_addr_get_pkey(dev_addr) >> 8;
+ mc_map[9] = (unsigned char) ib_addr_get_pkey(dev_addr);
+ *mgid = *(union ib_gid *) (mc_map + 4);
+ }
+}
+
+static int cma_join_ib_multicast(struct rdma_id_private *id_priv,
+ struct cma_multicast *mc)
+{
+ struct ib_sa_mcmember_rec rec;
+ struct rdma_dev_addr *dev_addr = &id_priv->id.route.addr.dev_addr;
+ ib_sa_comp_mask comp_mask;
+ int ret;
+
+ ib_addr_get_mgid(dev_addr, &rec.mgid);
+ ret = ib_sa_get_mcmember_rec(id_priv->id.device, id_priv->id.port_num,
+ &rec.mgid, &rec);
+ if (ret)
+ return ret;
+
+ cma_set_mgid(id_priv, &mc->addr, &rec.mgid);
+ if (id_priv->id.ps == RDMA_PS_UDP)
+ rec.qkey = cpu_to_be32(RDMA_UDP_QKEY);
+ ib_addr_get_sgid(dev_addr, &rec.port_gid);
+ rec.pkey = cpu_to_be16(ib_addr_get_pkey(dev_addr));
+ rec.join_state = 1;
+
+ comp_mask = IB_SA_MCMEMBER_REC_MGID | IB_SA_MCMEMBER_REC_PORT_GID |
+ IB_SA_MCMEMBER_REC_PKEY | IB_SA_MCMEMBER_REC_JOIN_STATE |
+ IB_SA_MCMEMBER_REC_QKEY | IB_SA_MCMEMBER_REC_SL |
+ IB_SA_MCMEMBER_REC_FLOW_LABEL |
+ IB_SA_MCMEMBER_REC_TRAFFIC_CLASS;
+
+ mc->multicast.ib = ib_sa_join_multicast(&sa_client, id_priv->id.device,
+ id_priv->id.port_num, &rec,
+ comp_mask, GFP_KERNEL,
+ cma_ib_mc_handler, mc);
+ if (IS_ERR(mc->multicast.ib))
+ return PTR_ERR(mc->multicast.ib);
+
+ return 0;
+}
+
+int rdma_join_multicast(struct rdma_cm_id *id, struct sockaddr *addr,
+ void *context)
+{
+ struct rdma_id_private *id_priv;
+ struct cma_multicast *mc;
+ int ret;
+
+ id_priv = container_of(id, struct rdma_id_private, id);
+ if (!cma_comp(id_priv, CMA_ADDR_BOUND) &&
+ !cma_comp(id_priv, CMA_ADDR_RESOLVED))
+ return -EINVAL;
+
+ mc = kmalloc(sizeof *mc, GFP_KERNEL);
+ if (!mc)
+ return -ENOMEM;
+
+ memcpy(&mc->addr, addr, ip_addr_size(addr));
+ mc->context = context;
+ mc->id_priv = id_priv;
+
+ spin_lock(&id_priv->lock);
+ list_add(&mc->list, &id_priv->mc_list);
+ spin_unlock(&id_priv->lock);
+
+ switch (rdma_node_get_transport(id->device->node_type)) {
+ case RDMA_TRANSPORT_IB:
+ ret = cma_join_ib_multicast(id_priv, mc);
+ break;
+ default:
+ ret = -ENOSYS;
+ break;
+ }
+
+ if (ret) {
+ spin_lock_irq(&id_priv->lock);
+ list_del(&mc->list);
+ spin_unlock_irq(&id_priv->lock);
+ kfree(mc);
+ }
+ return ret;
+}
+EXPORT_SYMBOL(rdma_join_multicast);
+
+void rdma_leave_multicast(struct rdma_cm_id *id, struct sockaddr *addr)
+{
+ struct rdma_id_private *id_priv;
+ struct cma_multicast *mc;
+
+ id_priv = container_of(id, struct rdma_id_private, id);
+ spin_lock_irq(&id_priv->lock);
+ list_for_each_entry(mc, &id_priv->mc_list, list) {
+ if (!memcmp(&mc->addr, addr, ip_addr_size(addr))) {
+ list_del(&mc->list);
+ spin_unlock_irq(&id_priv->lock);
+
+ if (id->qp)
+ ib_detach_mcast(id->qp,
+ &mc->multicast.ib->rec.mgid,
+ mc->multicast.ib->rec.mlid);
+ ib_sa_free_multicast(mc->multicast.ib);
+ kfree(mc);
+ return;
+ }
+ }
+ spin_unlock_irq(&id_priv->lock);
+}
+EXPORT_SYMBOL(rdma_leave_multicast);
+
static void cma_add_one(struct ib_device *device)
{
struct cma_device *cma_dev;
@@ -2522,6 +2792,7 @@
idr_destroy(&sdp_ps);
idr_destroy(&tcp_ps);
idr_destroy(&udp_ps);
+ idr_destroy(&ipoib_ps);
}
module_init(cma_init);
diff --git a/drivers/infiniband/core/fmr_pool.c b/drivers/infiniband/core/fmr_pool.c
index 8926a2b..1d796e7 100644
--- a/drivers/infiniband/core/fmr_pool.c
+++ b/drivers/infiniband/core/fmr_pool.c
@@ -301,7 +301,7 @@
{
struct ib_pool_fmr *fmr;
- struct ib_fmr_attr attr = {
+ struct ib_fmr_attr fmr_attr = {
.max_pages = params->max_pages_per_fmr,
.max_maps = pool->max_remaps,
.page_shift = params->page_shift
@@ -321,7 +321,7 @@
fmr->ref_count = 0;
INIT_HLIST_NODE(&fmr->cache_node);
- fmr->fmr = ib_alloc_fmr(pd, params->access, &attr);
+ fmr->fmr = ib_alloc_fmr(pd, params->access, &fmr_attr);
if (IS_ERR(fmr->fmr)) {
printk(KERN_WARNING "fmr_create failed for FMR %d", i);
kfree(fmr);
diff --git a/drivers/infiniband/core/iwcm.c b/drivers/infiniband/core/iwcm.c
index 1039ad5..891d1fa 100644
--- a/drivers/infiniband/core/iwcm.c
+++ b/drivers/infiniband/core/iwcm.c
@@ -146,6 +146,12 @@
return 0;
}
+static void free_cm_id(struct iwcm_id_private *cm_id_priv)
+{
+ dealloc_work_entries(cm_id_priv);
+ kfree(cm_id_priv);
+}
+
/*
* Release a reference on cm_id. If the last reference is being
* released, enable the waiting thread (in iw_destroy_cm_id) to
@@ -153,21 +159,14 @@
*/
static int iwcm_deref_id(struct iwcm_id_private *cm_id_priv)
{
- int ret = 0;
-
BUG_ON(atomic_read(&cm_id_priv->refcount)==0);
if (atomic_dec_and_test(&cm_id_priv->refcount)) {
BUG_ON(!list_empty(&cm_id_priv->work_list));
- if (waitqueue_active(&cm_id_priv->destroy_comp.wait)) {
- BUG_ON(cm_id_priv->state != IW_CM_STATE_DESTROYING);
- BUG_ON(test_bit(IWCM_F_CALLBACK_DESTROY,
- &cm_id_priv->flags));
- ret = 1;
- }
complete(&cm_id_priv->destroy_comp);
+ return 1;
}
- return ret;
+ return 0;
}
static void add_ref(struct iw_cm_id *cm_id)
@@ -181,7 +180,11 @@
{
struct iwcm_id_private *cm_id_priv;
cm_id_priv = container_of(cm_id, struct iwcm_id_private, id);
- iwcm_deref_id(cm_id_priv);
+ if (iwcm_deref_id(cm_id_priv) &&
+ test_bit(IWCM_F_CALLBACK_DESTROY, &cm_id_priv->flags)) {
+ BUG_ON(!list_empty(&cm_id_priv->work_list));
+ free_cm_id(cm_id_priv);
+ }
}
static int cm_event_handler(struct iw_cm_id *cm_id, struct iw_cm_event *event);
@@ -355,7 +358,9 @@
case IW_CM_STATE_CONN_RECV:
/*
* App called destroy before/without calling accept after
- * receiving connection request event notification.
+ * receiving connection request event notification or
+ * returned non zero from the event callback function.
+ * In either case, must tell the provider to reject.
*/
cm_id_priv->state = IW_CM_STATE_DESTROYING;
break;
@@ -391,9 +396,7 @@
wait_for_completion(&cm_id_priv->destroy_comp);
- dealloc_work_entries(cm_id_priv);
-
- kfree(cm_id_priv);
+ free_cm_id(cm_id_priv);
}
EXPORT_SYMBOL(iw_destroy_cm_id);
@@ -647,10 +650,11 @@
/* Call the client CM handler */
ret = cm_id->cm_handler(cm_id, iw_event);
if (ret) {
+ iw_cm_reject(cm_id, NULL, 0);
set_bit(IWCM_F_CALLBACK_DESTROY, &cm_id_priv->flags);
destroy_cm_id(cm_id);
if (atomic_read(&cm_id_priv->refcount)==0)
- kfree(cm_id);
+ free_cm_id(cm_id_priv);
}
out:
@@ -854,13 +858,12 @@
destroy_cm_id(&cm_id_priv->id);
}
BUG_ON(atomic_read(&cm_id_priv->refcount)==0);
- if (iwcm_deref_id(cm_id_priv))
- return;
-
- if (atomic_read(&cm_id_priv->refcount)==0 &&
- test_bit(IWCM_F_CALLBACK_DESTROY, &cm_id_priv->flags)) {
- dealloc_work_entries(cm_id_priv);
- kfree(cm_id_priv);
+ if (iwcm_deref_id(cm_id_priv)) {
+ if (test_bit(IWCM_F_CALLBACK_DESTROY,
+ &cm_id_priv->flags)) {
+ BUG_ON(!list_empty(&cm_id_priv->work_list));
+ free_cm_id(cm_id_priv);
+ }
return;
}
spin_lock_irqsave(&cm_id_priv->lock, flags);
diff --git a/drivers/infiniband/core/multicast.c b/drivers/infiniband/core/multicast.c
new file mode 100644
index 0000000..4a579b3
--- /dev/null
+++ b/drivers/infiniband/core/multicast.c
@@ -0,0 +1,837 @@
+/*
+ * Copyright (c) 2006 Intel Corporation. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include <linux/completion.h>
+#include <linux/dma-mapping.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/bitops.h>
+#include <linux/random.h>
+
+#include <rdma/ib_cache.h>
+#include "sa.h"
+
+static void mcast_add_one(struct ib_device *device);
+static void mcast_remove_one(struct ib_device *device);
+
+static struct ib_client mcast_client = {
+ .name = "ib_multicast",
+ .add = mcast_add_one,
+ .remove = mcast_remove_one
+};
+
+static struct ib_sa_client sa_client;
+static struct workqueue_struct *mcast_wq;
+static union ib_gid mgid0;
+
+struct mcast_device;
+
+struct mcast_port {
+ struct mcast_device *dev;
+ spinlock_t lock;
+ struct rb_root table;
+ atomic_t refcount;
+ struct completion comp;
+ u8 port_num;
+};
+
+struct mcast_device {
+ struct ib_device *device;
+ struct ib_event_handler event_handler;
+ int start_port;
+ int end_port;
+ struct mcast_port port[0];
+};
+
+enum mcast_state {
+ MCAST_IDLE,
+ MCAST_JOINING,
+ MCAST_MEMBER,
+ MCAST_BUSY,
+ MCAST_ERROR
+};
+
+struct mcast_member;
+
+struct mcast_group {
+ struct ib_sa_mcmember_rec rec;
+ struct rb_node node;
+ struct mcast_port *port;
+ spinlock_t lock;
+ struct work_struct work;
+ struct list_head pending_list;
+ struct list_head active_list;
+ struct mcast_member *last_join;
+ int members[3];
+ atomic_t refcount;
+ enum mcast_state state;
+ struct ib_sa_query *query;
+ int query_id;
+};
+
+struct mcast_member {
+ struct ib_sa_multicast multicast;
+ struct ib_sa_client *client;
+ struct mcast_group *group;
+ struct list_head list;
+ enum mcast_state state;
+ atomic_t refcount;
+ struct completion comp;
+};
+
+static void join_handler(int status, struct ib_sa_mcmember_rec *rec,
+ void *context);
+static void leave_handler(int status, struct ib_sa_mcmember_rec *rec,
+ void *context);
+
+static struct mcast_group *mcast_find(struct mcast_port *port,
+ union ib_gid *mgid)
+{
+ struct rb_node *node = port->table.rb_node;
+ struct mcast_group *group;
+ int ret;
+
+ while (node) {
+ group = rb_entry(node, struct mcast_group, node);
+ ret = memcmp(mgid->raw, group->rec.mgid.raw, sizeof *mgid);
+ if (!ret)
+ return group;
+
+ if (ret < 0)
+ node = node->rb_left;
+ else
+ node = node->rb_right;
+ }
+ return NULL;
+}
+
+static struct mcast_group *mcast_insert(struct mcast_port *port,
+ struct mcast_group *group,
+ int allow_duplicates)
+{
+ struct rb_node **link = &port->table.rb_node;
+ struct rb_node *parent = NULL;
+ struct mcast_group *cur_group;
+ int ret;
+
+ while (*link) {
+ parent = *link;
+ cur_group = rb_entry(parent, struct mcast_group, node);
+
+ ret = memcmp(group->rec.mgid.raw, cur_group->rec.mgid.raw,
+ sizeof group->rec.mgid);
+ if (ret < 0)
+ link = &(*link)->rb_left;
+ else if (ret > 0)
+ link = &(*link)->rb_right;
+ else if (allow_duplicates)
+ link = &(*link)->rb_left;
+ else
+ return cur_group;
+ }
+ rb_link_node(&group->node, parent, link);
+ rb_insert_color(&group->node, &port->table);
+ return NULL;
+}
+
+static void deref_port(struct mcast_port *port)
+{
+ if (atomic_dec_and_test(&port->refcount))
+ complete(&port->comp);
+}
+
+static void release_group(struct mcast_group *group)
+{
+ struct mcast_port *port = group->port;
+ unsigned long flags;
+
+ spin_lock_irqsave(&port->lock, flags);
+ if (atomic_dec_and_test(&group->refcount)) {
+ rb_erase(&group->node, &port->table);
+ spin_unlock_irqrestore(&port->lock, flags);
+ kfree(group);
+ deref_port(port);
+ } else
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static void deref_member(struct mcast_member *member)
+{
+ if (atomic_dec_and_test(&member->refcount))
+ complete(&member->comp);
+}
+
+static void queue_join(struct mcast_member *member)
+{
+ struct mcast_group *group = member->group;
+ unsigned long flags;
+
+ spin_lock_irqsave(&group->lock, flags);
+ list_add(&member->list, &group->pending_list);
+ if (group->state == MCAST_IDLE) {
+ group->state = MCAST_BUSY;
+ atomic_inc(&group->refcount);
+ queue_work(mcast_wq, &group->work);
+ }
+ spin_unlock_irqrestore(&group->lock, flags);
+}
+
+/*
+ * A multicast group has three types of members: full member, non member, and
+ * send only member. We need to keep track of the number of members of each
+ * type based on their join state. Adjust the number of members the belong to
+ * the specified join states.
+ */
+static void adjust_membership(struct mcast_group *group, u8 join_state, int inc)
+{
+ int i;
+
+ for (i = 0; i < 3; i++, join_state >>= 1)
+ if (join_state & 0x1)
+ group->members[i] += inc;
+}
+
+/*
+ * If a multicast group has zero members left for a particular join state, but
+ * the group is still a member with the SA, we need to leave that join state.
+ * Determine which join states we still belong to, but that do not have any
+ * active members.
+ */
+static u8 get_leave_state(struct mcast_group *group)
+{
+ u8 leave_state = 0;
+ int i;
+
+ for (i = 0; i < 3; i++)
+ if (!group->members[i])
+ leave_state |= (0x1 << i);
+
+ return leave_state & group->rec.join_state;
+}
+
+static int check_selector(ib_sa_comp_mask comp_mask,
+ ib_sa_comp_mask selector_mask,
+ ib_sa_comp_mask value_mask,
+ u8 selector, u8 src_value, u8 dst_value)
+{
+ int err;
+
+ if (!(comp_mask & selector_mask) || !(comp_mask & value_mask))
+ return 0;
+
+ switch (selector) {
+ case IB_SA_GT:
+ err = (src_value <= dst_value);
+ break;
+ case IB_SA_LT:
+ err = (src_value >= dst_value);
+ break;
+ case IB_SA_EQ:
+ err = (src_value != dst_value);
+ break;
+ default:
+ err = 0;
+ break;
+ }
+
+ return err;
+}
+
+static int cmp_rec(struct ib_sa_mcmember_rec *src,
+ struct ib_sa_mcmember_rec *dst, ib_sa_comp_mask comp_mask)
+{
+ /* MGID must already match */
+
+ if (comp_mask & IB_SA_MCMEMBER_REC_PORT_GID &&
+ memcmp(&src->port_gid, &dst->port_gid, sizeof src->port_gid))
+ return -EINVAL;
+ if (comp_mask & IB_SA_MCMEMBER_REC_QKEY && src->qkey != dst->qkey)
+ return -EINVAL;
+ if (comp_mask & IB_SA_MCMEMBER_REC_MLID && src->mlid != dst->mlid)
+ return -EINVAL;
+ if (check_selector(comp_mask, IB_SA_MCMEMBER_REC_MTU_SELECTOR,
+ IB_SA_MCMEMBER_REC_MTU, dst->mtu_selector,
+ src->mtu, dst->mtu))
+ return -EINVAL;
+ if (comp_mask & IB_SA_MCMEMBER_REC_TRAFFIC_CLASS &&
+ src->traffic_class != dst->traffic_class)
+ return -EINVAL;
+ if (comp_mask & IB_SA_MCMEMBER_REC_PKEY && src->pkey != dst->pkey)
+ return -EINVAL;
+ if (check_selector(comp_mask, IB_SA_MCMEMBER_REC_RATE_SELECTOR,
+ IB_SA_MCMEMBER_REC_RATE, dst->rate_selector,
+ src->rate, dst->rate))
+ return -EINVAL;
+ if (check_selector(comp_mask,
+ IB_SA_MCMEMBER_REC_PACKET_LIFE_TIME_SELECTOR,
+ IB_SA_MCMEMBER_REC_PACKET_LIFE_TIME,
+ dst->packet_life_time_selector,
+ src->packet_life_time, dst->packet_life_time))
+ return -EINVAL;
+ if (comp_mask & IB_SA_MCMEMBER_REC_SL && src->sl != dst->sl)
+ return -EINVAL;
+ if (comp_mask & IB_SA_MCMEMBER_REC_FLOW_LABEL &&
+ src->flow_label != dst->flow_label)
+ return -EINVAL;
+ if (comp_mask & IB_SA_MCMEMBER_REC_HOP_LIMIT &&
+ src->hop_limit != dst->hop_limit)
+ return -EINVAL;
+ if (comp_mask & IB_SA_MCMEMBER_REC_SCOPE && src->scope != dst->scope)
+ return -EINVAL;
+
+ /* join_state checked separately, proxy_join ignored */
+
+ return 0;
+}
+
+static int send_join(struct mcast_group *group, struct mcast_member *member)
+{
+ struct mcast_port *port = group->port;
+ int ret;
+
+ group->last_join = member;
+ ret = ib_sa_mcmember_rec_query(&sa_client, port->dev->device,
+ port->port_num, IB_MGMT_METHOD_SET,
+ &member->multicast.rec,
+ member->multicast.comp_mask,
+ 3000, GFP_KERNEL, join_handler, group,
+ &group->query);
+ if (ret >= 0) {
+ group->query_id = ret;
+ ret = 0;
+ }
+ return ret;
+}
+
+static int send_leave(struct mcast_group *group, u8 leave_state)
+{
+ struct mcast_port *port = group->port;
+ struct ib_sa_mcmember_rec rec;
+ int ret;
+
+ rec = group->rec;
+ rec.join_state = leave_state;
+
+ ret = ib_sa_mcmember_rec_query(&sa_client, port->dev->device,
+ port->port_num, IB_SA_METHOD_DELETE, &rec,
+ IB_SA_MCMEMBER_REC_MGID |
+ IB_SA_MCMEMBER_REC_PORT_GID |
+ IB_SA_MCMEMBER_REC_JOIN_STATE,
+ 3000, GFP_KERNEL, leave_handler,
+ group, &group->query);
+ if (ret >= 0) {
+ group->query_id = ret;
+ ret = 0;
+ }
+ return ret;
+}
+
+static void join_group(struct mcast_group *group, struct mcast_member *member,
+ u8 join_state)
+{
+ member->state = MCAST_MEMBER;
+ adjust_membership(group, join_state, 1);
+ group->rec.join_state |= join_state;
+ member->multicast.rec = group->rec;
+ member->multicast.rec.join_state = join_state;
+ list_move(&member->list, &group->active_list);
+}
+
+static int fail_join(struct mcast_group *group, struct mcast_member *member,
+ int status)
+{
+ spin_lock_irq(&group->lock);
+ list_del_init(&member->list);
+ spin_unlock_irq(&group->lock);
+ return member->multicast.callback(status, &member->multicast);
+}
+
+static void process_group_error(struct mcast_group *group)
+{
+ struct mcast_member *member;
+ int ret;
+
+ spin_lock_irq(&group->lock);
+ while (!list_empty(&group->active_list)) {
+ member = list_entry(group->active_list.next,
+ struct mcast_member, list);
+ atomic_inc(&member->refcount);
+ list_del_init(&member->list);
+ adjust_membership(group, member->multicast.rec.join_state, -1);
+ member->state = MCAST_ERROR;
+ spin_unlock_irq(&group->lock);
+
+ ret = member->multicast.callback(-ENETRESET,
+ &member->multicast);
+ deref_member(member);
+ if (ret)
+ ib_sa_free_multicast(&member->multicast);
+ spin_lock_irq(&group->lock);
+ }
+
+ group->rec.join_state = 0;
+ group->state = MCAST_BUSY;
+ spin_unlock_irq(&group->lock);
+}
+
+static void mcast_work_handler(struct work_struct *work)
+{
+ struct mcast_group *group;
+ struct mcast_member *member;
+ struct ib_sa_multicast *multicast;
+ int status, ret;
+ u8 join_state;
+
+ group = container_of(work, typeof(*group), work);
+retest:
+ spin_lock_irq(&group->lock);
+ while (!list_empty(&group->pending_list) ||
+ (group->state == MCAST_ERROR)) {
+
+ if (group->state == MCAST_ERROR) {
+ spin_unlock_irq(&group->lock);
+ process_group_error(group);
+ goto retest;
+ }
+
+ member = list_entry(group->pending_list.next,
+ struct mcast_member, list);
+ multicast = &member->multicast;
+ join_state = multicast->rec.join_state;
+ atomic_inc(&member->refcount);
+
+ if (join_state == (group->rec.join_state & join_state)) {
+ status = cmp_rec(&group->rec, &multicast->rec,
+ multicast->comp_mask);
+ if (!status)
+ join_group(group, member, join_state);
+ else
+ list_del_init(&member->list);
+ spin_unlock_irq(&group->lock);
+ ret = multicast->callback(status, multicast);
+ } else {
+ spin_unlock_irq(&group->lock);
+ status = send_join(group, member);
+ if (!status) {
+ deref_member(member);
+ return;
+ }
+ ret = fail_join(group, member, status);
+ }
+
+ deref_member(member);
+ if (ret)
+ ib_sa_free_multicast(&member->multicast);
+ spin_lock_irq(&group->lock);
+ }
+
+ join_state = get_leave_state(group);
+ if (join_state) {
+ group->rec.join_state &= ~join_state;
+ spin_unlock_irq(&group->lock);
+ if (send_leave(group, join_state))
+ goto retest;
+ } else {
+ group->state = MCAST_IDLE;
+ spin_unlock_irq(&group->lock);
+ release_group(group);
+ }
+}
+
+/*
+ * Fail a join request if it is still active - at the head of the pending queue.
+ */
+static void process_join_error(struct mcast_group *group, int status)
+{
+ struct mcast_member *member;
+ int ret;
+
+ spin_lock_irq(&group->lock);
+ member = list_entry(group->pending_list.next,
+ struct mcast_member, list);
+ if (group->last_join == member) {
+ atomic_inc(&member->refcount);
+ list_del_init(&member->list);
+ spin_unlock_irq(&group->lock);
+ ret = member->multicast.callback(status, &member->multicast);
+ deref_member(member);
+ if (ret)
+ ib_sa_free_multicast(&member->multicast);
+ } else
+ spin_unlock_irq(&group->lock);
+}
+
+static void join_handler(int status, struct ib_sa_mcmember_rec *rec,
+ void *context)
+{
+ struct mcast_group *group = context;
+
+ if (status)
+ process_join_error(group, status);
+ else {
+ spin_lock_irq(&group->port->lock);
+ group->rec = *rec;
+ if (!memcmp(&mgid0, &group->rec.mgid, sizeof mgid0)) {
+ rb_erase(&group->node, &group->port->table);
+ mcast_insert(group->port, group, 1);
+ }
+ spin_unlock_irq(&group->port->lock);
+ }
+ mcast_work_handler(&group->work);
+}
+
+static void leave_handler(int status, struct ib_sa_mcmember_rec *rec,
+ void *context)
+{
+ struct mcast_group *group = context;
+
+ mcast_work_handler(&group->work);
+}
+
+static struct mcast_group *acquire_group(struct mcast_port *port,
+ union ib_gid *mgid, gfp_t gfp_mask)
+{
+ struct mcast_group *group, *cur_group;
+ unsigned long flags;
+ int is_mgid0;
+
+ is_mgid0 = !memcmp(&mgid0, mgid, sizeof mgid0);
+ if (!is_mgid0) {
+ spin_lock_irqsave(&port->lock, flags);
+ group = mcast_find(port, mgid);
+ if (group)
+ goto found;
+ spin_unlock_irqrestore(&port->lock, flags);
+ }
+
+ group = kzalloc(sizeof *group, gfp_mask);
+ if (!group)
+ return NULL;
+
+ group->port = port;
+ group->rec.mgid = *mgid;
+ INIT_LIST_HEAD(&group->pending_list);
+ INIT_LIST_HEAD(&group->active_list);
+ INIT_WORK(&group->work, mcast_work_handler);
+ spin_lock_init(&group->lock);
+
+ spin_lock_irqsave(&port->lock, flags);
+ cur_group = mcast_insert(port, group, is_mgid0);
+ if (cur_group) {
+ kfree(group);
+ group = cur_group;
+ } else
+ atomic_inc(&port->refcount);
+found:
+ atomic_inc(&group->refcount);
+ spin_unlock_irqrestore(&port->lock, flags);
+ return group;
+}
+
+/*
+ * We serialize all join requests to a single group to make our lives much
+ * easier. Otherwise, two users could try to join the same group
+ * simultaneously, with different configurations, one could leave while the
+ * join is in progress, etc., which makes locking around error recovery
+ * difficult.
+ */
+struct ib_sa_multicast *
+ib_sa_join_multicast(struct ib_sa_client *client,
+ struct ib_device *device, u8 port_num,
+ struct ib_sa_mcmember_rec *rec,
+ ib_sa_comp_mask comp_mask, gfp_t gfp_mask,
+ int (*callback)(int status,
+ struct ib_sa_multicast *multicast),
+ void *context)
+{
+ struct mcast_device *dev;
+ struct mcast_member *member;
+ struct ib_sa_multicast *multicast;
+ int ret;
+
+ dev = ib_get_client_data(device, &mcast_client);
+ if (!dev)
+ return ERR_PTR(-ENODEV);
+
+ member = kmalloc(sizeof *member, gfp_mask);
+ if (!member)
+ return ERR_PTR(-ENOMEM);
+
+ ib_sa_client_get(client);
+ member->client = client;
+ member->multicast.rec = *rec;
+ member->multicast.comp_mask = comp_mask;
+ member->multicast.callback = callback;
+ member->multicast.context = context;
+ init_completion(&member->comp);
+ atomic_set(&member->refcount, 1);
+ member->state = MCAST_JOINING;
+
+ member->group = acquire_group(&dev->port[port_num - dev->start_port],
+ &rec->mgid, gfp_mask);
+ if (!member->group) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ /*
+ * The user will get the multicast structure in their callback. They
+ * could then free the multicast structure before we can return from
+ * this routine. So we save the pointer to return before queuing
+ * any callback.
+ */
+ multicast = &member->multicast;
+ queue_join(member);
+ return multicast;
+
+err:
+ ib_sa_client_put(client);
+ kfree(member);
+ return ERR_PTR(ret);
+}
+EXPORT_SYMBOL(ib_sa_join_multicast);
+
+void ib_sa_free_multicast(struct ib_sa_multicast *multicast)
+{
+ struct mcast_member *member;
+ struct mcast_group *group;
+
+ member = container_of(multicast, struct mcast_member, multicast);
+ group = member->group;
+
+ spin_lock_irq(&group->lock);
+ if (member->state == MCAST_MEMBER)
+ adjust_membership(group, multicast->rec.join_state, -1);
+
+ list_del_init(&member->list);
+
+ if (group->state == MCAST_IDLE) {
+ group->state = MCAST_BUSY;
+ spin_unlock_irq(&group->lock);
+ /* Continue to hold reference on group until callback */
+ queue_work(mcast_wq, &group->work);
+ } else {
+ spin_unlock_irq(&group->lock);
+ release_group(group);
+ }
+
+ deref_member(member);
+ wait_for_completion(&member->comp);
+ ib_sa_client_put(member->client);
+ kfree(member);
+}
+EXPORT_SYMBOL(ib_sa_free_multicast);
+
+int ib_sa_get_mcmember_rec(struct ib_device *device, u8 port_num,
+ union ib_gid *mgid, struct ib_sa_mcmember_rec *rec)
+{
+ struct mcast_device *dev;
+ struct mcast_port *port;
+ struct mcast_group *group;
+ unsigned long flags;
+ int ret = 0;
+
+ dev = ib_get_client_data(device, &mcast_client);
+ if (!dev)
+ return -ENODEV;
+
+ port = &dev->port[port_num - dev->start_port];
+ spin_lock_irqsave(&port->lock, flags);
+ group = mcast_find(port, mgid);
+ if (group)
+ *rec = group->rec;
+ else
+ ret = -EADDRNOTAVAIL;
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL(ib_sa_get_mcmember_rec);
+
+int ib_init_ah_from_mcmember(struct ib_device *device, u8 port_num,
+ struct ib_sa_mcmember_rec *rec,
+ struct ib_ah_attr *ah_attr)
+{
+ int ret;
+ u16 gid_index;
+ u8 p;
+
+ ret = ib_find_cached_gid(device, &rec->port_gid, &p, &gid_index);
+ if (ret)
+ return ret;
+
+ memset(ah_attr, 0, sizeof *ah_attr);
+ ah_attr->dlid = be16_to_cpu(rec->mlid);
+ ah_attr->sl = rec->sl;
+ ah_attr->port_num = port_num;
+ ah_attr->static_rate = rec->rate;
+
+ ah_attr->ah_flags = IB_AH_GRH;
+ ah_attr->grh.dgid = rec->mgid;
+
+ ah_attr->grh.sgid_index = (u8) gid_index;
+ ah_attr->grh.flow_label = be32_to_cpu(rec->flow_label);
+ ah_attr->grh.hop_limit = rec->hop_limit;
+ ah_attr->grh.traffic_class = rec->traffic_class;
+
+ return 0;
+}
+EXPORT_SYMBOL(ib_init_ah_from_mcmember);
+
+static void mcast_groups_lost(struct mcast_port *port)
+{
+ struct mcast_group *group;
+ struct rb_node *node;
+ unsigned long flags;
+
+ spin_lock_irqsave(&port->lock, flags);
+ for (node = rb_first(&port->table); node; node = rb_next(node)) {
+ group = rb_entry(node, struct mcast_group, node);
+ spin_lock(&group->lock);
+ if (group->state == MCAST_IDLE) {
+ atomic_inc(&group->refcount);
+ queue_work(mcast_wq, &group->work);
+ }
+ group->state = MCAST_ERROR;
+ spin_unlock(&group->lock);
+ }
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static void mcast_event_handler(struct ib_event_handler *handler,
+ struct ib_event *event)
+{
+ struct mcast_device *dev;
+
+ dev = container_of(handler, struct mcast_device, event_handler);
+
+ switch (event->event) {
+ case IB_EVENT_PORT_ERR:
+ case IB_EVENT_LID_CHANGE:
+ case IB_EVENT_SM_CHANGE:
+ case IB_EVENT_CLIENT_REREGISTER:
+ mcast_groups_lost(&dev->port[event->element.port_num -
+ dev->start_port]);
+ break;
+ default:
+ break;
+ }
+}
+
+static void mcast_add_one(struct ib_device *device)
+{
+ struct mcast_device *dev;
+ struct mcast_port *port;
+ int i;
+
+ if (rdma_node_get_transport(device->node_type) != RDMA_TRANSPORT_IB)
+ return;
+
+ dev = kmalloc(sizeof *dev + device->phys_port_cnt * sizeof *port,
+ GFP_KERNEL);
+ if (!dev)
+ return;
+
+ if (device->node_type == RDMA_NODE_IB_SWITCH)
+ dev->start_port = dev->end_port = 0;
+ else {
+ dev->start_port = 1;
+ dev->end_port = device->phys_port_cnt;
+ }
+
+ for (i = 0; i <= dev->end_port - dev->start_port; i++) {
+ port = &dev->port[i];
+ port->dev = dev;
+ port->port_num = dev->start_port + i;
+ spin_lock_init(&port->lock);
+ port->table = RB_ROOT;
+ init_completion(&port->comp);
+ atomic_set(&port->refcount, 1);
+ }
+
+ dev->device = device;
+ ib_set_client_data(device, &mcast_client, dev);
+
+ INIT_IB_EVENT_HANDLER(&dev->event_handler, device, mcast_event_handler);
+ ib_register_event_handler(&dev->event_handler);
+}
+
+static void mcast_remove_one(struct ib_device *device)
+{
+ struct mcast_device *dev;
+ struct mcast_port *port;
+ int i;
+
+ dev = ib_get_client_data(device, &mcast_client);
+ if (!dev)
+ return;
+
+ ib_unregister_event_handler(&dev->event_handler);
+ flush_workqueue(mcast_wq);
+
+ for (i = 0; i <= dev->end_port - dev->start_port; i++) {
+ port = &dev->port[i];
+ deref_port(port);
+ wait_for_completion(&port->comp);
+ }
+
+ kfree(dev);
+}
+
+int mcast_init(void)
+{
+ int ret;
+
+ mcast_wq = create_singlethread_workqueue("ib_mcast");
+ if (!mcast_wq)
+ return -ENOMEM;
+
+ ib_sa_register_client(&sa_client);
+
+ ret = ib_register_client(&mcast_client);
+ if (ret)
+ goto err;
+ return 0;
+
+err:
+ ib_sa_unregister_client(&sa_client);
+ destroy_workqueue(mcast_wq);
+ return ret;
+}
+
+void mcast_cleanup(void)
+{
+ ib_unregister_client(&mcast_client);
+ ib_sa_unregister_client(&sa_client);
+ destroy_workqueue(mcast_wq);
+}
diff --git a/drivers/infiniband/core/sa.h b/drivers/infiniband/core/sa.h
new file mode 100644
index 0000000..24c93fd
--- /dev/null
+++ b/drivers/infiniband/core/sa.h
@@ -0,0 +1,66 @@
+/*
+ * Copyright (c) 2004 Topspin Communications. All rights reserved.
+ * Copyright (c) 2005 Voltaire, Inc. All rights reserved.
+ * Copyright (c) 2006 Intel Corporation. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#ifndef SA_H
+#define SA_H
+
+#include <rdma/ib_sa.h>
+
+static inline void ib_sa_client_get(struct ib_sa_client *client)
+{
+ atomic_inc(&client->users);
+}
+
+static inline void ib_sa_client_put(struct ib_sa_client *client)
+{
+ if (atomic_dec_and_test(&client->users))
+ complete(&client->comp);
+}
+
+int ib_sa_mcmember_rec_query(struct ib_sa_client *client,
+ struct ib_device *device, u8 port_num,
+ u8 method,
+ struct ib_sa_mcmember_rec *rec,
+ ib_sa_comp_mask comp_mask,
+ int timeout_ms, gfp_t gfp_mask,
+ void (*callback)(int status,
+ struct ib_sa_mcmember_rec *resp,
+ void *context),
+ void *context,
+ struct ib_sa_query **sa_query);
+
+int mcast_init(void);
+void mcast_cleanup(void);
+
+#endif /* SA_H */
diff --git a/drivers/infiniband/core/sa_query.c b/drivers/infiniband/core/sa_query.c
index e45afba..68db633 100644
--- a/drivers/infiniband/core/sa_query.c
+++ b/drivers/infiniband/core/sa_query.c
@@ -47,8 +47,8 @@
#include <linux/workqueue.h>
#include <rdma/ib_pack.h>
-#include <rdma/ib_sa.h>
#include <rdma/ib_cache.h>
+#include "sa.h"
MODULE_AUTHOR("Roland Dreier");
MODULE_DESCRIPTION("InfiniBand subnet administration query support");
@@ -425,17 +425,6 @@
}
EXPORT_SYMBOL(ib_sa_register_client);
-static inline void ib_sa_client_get(struct ib_sa_client *client)
-{
- atomic_inc(&client->users);
-}
-
-static inline void ib_sa_client_put(struct ib_sa_client *client)
-{
- if (atomic_dec_and_test(&client->users))
- complete(&client->comp);
-}
-
void ib_sa_unregister_client(struct ib_sa_client *client)
{
ib_sa_client_put(client);
@@ -482,6 +471,7 @@
ah_attr->sl = rec->sl;
ah_attr->src_path_bits = be16_to_cpu(rec->slid) & 0x7f;
ah_attr->port_num = port_num;
+ ah_attr->static_rate = rec->rate;
if (rec->hop_limit > 1) {
ah_attr->ah_flags = IB_AH_GRH;
@@ -901,7 +891,6 @@
kfree(query);
return ret;
}
-EXPORT_SYMBOL(ib_sa_mcmember_rec_query);
static void send_handler(struct ib_mad_agent *agent,
struct ib_mad_send_wc *mad_send_wc)
@@ -1053,14 +1042,27 @@
get_random_bytes(&tid, sizeof tid);
ret = ib_register_client(&sa_client);
- if (ret)
+ if (ret) {
printk(KERN_ERR "Couldn't register ib_sa client\n");
+ goto err1;
+ }
+ ret = mcast_init();
+ if (ret) {
+ printk(KERN_ERR "Couldn't initialize multicast handling\n");
+ goto err2;
+ }
+
+ return 0;
+err2:
+ ib_unregister_client(&sa_client);
+err1:
return ret;
}
static void __exit ib_sa_cleanup(void)
{
+ mcast_cleanup();
ib_unregister_client(&sa_client);
idr_destroy(&query_idr);
}
diff --git a/drivers/infiniband/core/sysfs.c b/drivers/infiniband/core/sysfs.c
index 709323c..000c086 100644
--- a/drivers/infiniband/core/sysfs.c
+++ b/drivers/infiniband/core/sysfs.c
@@ -714,8 +714,6 @@
if (ret)
goto err_put;
} else {
- int i;
-
for (i = 1; i <= device->phys_port_cnt; ++i) {
ret = add_port(device, i);
if (ret)
diff --git a/drivers/infiniband/core/ucma.c b/drivers/infiniband/core/ucma.c
index 6b81b98..b516b93 100644
--- a/drivers/infiniband/core/ucma.c
+++ b/drivers/infiniband/core/ucma.c
@@ -70,10 +70,24 @@
u64 uid;
struct list_head list;
+ struct list_head mc_list;
+};
+
+struct ucma_multicast {
+ struct ucma_context *ctx;
+ int id;
+ int events_reported;
+
+ u64 uid;
+ struct list_head list;
+ struct sockaddr addr;
+ u8 pad[sizeof(struct sockaddr_in6) -
+ sizeof(struct sockaddr)];
};
struct ucma_event {
struct ucma_context *ctx;
+ struct ucma_multicast *mc;
struct list_head list;
struct rdma_cm_id *cm_id;
struct rdma_ucm_event_resp resp;
@@ -81,6 +95,7 @@
static DEFINE_MUTEX(mut);
static DEFINE_IDR(ctx_idr);
+static DEFINE_IDR(multicast_idr);
static inline struct ucma_context *_ucma_find_context(int id,
struct ucma_file *file)
@@ -124,6 +139,7 @@
atomic_set(&ctx->ref, 1);
init_completion(&ctx->comp);
+ INIT_LIST_HEAD(&ctx->mc_list);
ctx->file = file;
do {
@@ -147,6 +163,37 @@
return NULL;
}
+static struct ucma_multicast* ucma_alloc_multicast(struct ucma_context *ctx)
+{
+ struct ucma_multicast *mc;
+ int ret;
+
+ mc = kzalloc(sizeof(*mc), GFP_KERNEL);
+ if (!mc)
+ return NULL;
+
+ do {
+ ret = idr_pre_get(&multicast_idr, GFP_KERNEL);
+ if (!ret)
+ goto error;
+
+ mutex_lock(&mut);
+ ret = idr_get_new(&multicast_idr, mc, &mc->id);
+ mutex_unlock(&mut);
+ } while (ret == -EAGAIN);
+
+ if (ret)
+ goto error;
+
+ mc->ctx = ctx;
+ list_add_tail(&mc->list, &ctx->mc_list);
+ return mc;
+
+error:
+ kfree(mc);
+ return NULL;
+}
+
static void ucma_copy_conn_event(struct rdma_ucm_conn_param *dst,
struct rdma_conn_param *src)
{
@@ -180,8 +227,19 @@
struct ucma_event *uevent)
{
uevent->ctx = ctx;
- uevent->resp.uid = ctx->uid;
- uevent->resp.id = ctx->id;
+ switch (event->event) {
+ case RDMA_CM_EVENT_MULTICAST_JOIN:
+ case RDMA_CM_EVENT_MULTICAST_ERROR:
+ uevent->mc = (struct ucma_multicast *)
+ event->param.ud.private_data;
+ uevent->resp.uid = uevent->mc->uid;
+ uevent->resp.id = uevent->mc->id;
+ break;
+ default:
+ uevent->resp.uid = ctx->uid;
+ uevent->resp.id = ctx->id;
+ break;
+ }
}
static int ucma_event_handler(struct rdma_cm_id *cm_id,
@@ -199,7 +257,7 @@
ucma_set_event_context(ctx, event, uevent);
uevent->resp.event = event->event;
uevent->resp.status = event->status;
- if (cm_id->ps == RDMA_PS_UDP)
+ if (cm_id->ps == RDMA_PS_UDP || cm_id->ps == RDMA_PS_IPOIB)
ucma_copy_ud_event(&uevent->resp.param.ud, &event->param.ud);
else
ucma_copy_conn_event(&uevent->resp.param.conn,
@@ -290,6 +348,8 @@
list_del(&uevent->list);
uevent->ctx->events_reported++;
+ if (uevent->mc)
+ uevent->mc->events_reported++;
kfree(uevent);
done:
mutex_unlock(&file->mut);
@@ -342,6 +402,19 @@
return ret;
}
+static void ucma_cleanup_multicast(struct ucma_context *ctx)
+{
+ struct ucma_multicast *mc, *tmp;
+
+ mutex_lock(&mut);
+ list_for_each_entry_safe(mc, tmp, &ctx->mc_list, list) {
+ list_del(&mc->list);
+ idr_remove(&multicast_idr, mc->id);
+ kfree(mc);
+ }
+ mutex_unlock(&mut);
+}
+
static void ucma_cleanup_events(struct ucma_context *ctx)
{
struct ucma_event *uevent, *tmp;
@@ -360,6 +433,19 @@
}
}
+static void ucma_cleanup_mc_events(struct ucma_multicast *mc)
+{
+ struct ucma_event *uevent, *tmp;
+
+ list_for_each_entry_safe(uevent, tmp, &mc->ctx->file->event_list, list) {
+ if (uevent->mc != mc)
+ continue;
+
+ list_del(&uevent->list);
+ kfree(uevent);
+ }
+}
+
static int ucma_free_ctx(struct ucma_context *ctx)
{
int events_reported;
@@ -367,6 +453,8 @@
/* No new events will be generated after destroying the id. */
rdma_destroy_id(ctx->cm_id);
+ ucma_cleanup_multicast(ctx);
+
/* Cleanup events not yet reported to the user. */
mutex_lock(&ctx->file->mut);
ucma_cleanup_events(ctx);
@@ -731,6 +819,114 @@
return ret;
}
+static ssize_t ucma_join_multicast(struct ucma_file *file,
+ const char __user *inbuf,
+ int in_len, int out_len)
+{
+ struct rdma_ucm_join_mcast cmd;
+ struct rdma_ucm_create_id_resp resp;
+ struct ucma_context *ctx;
+ struct ucma_multicast *mc;
+ int ret;
+
+ if (out_len < sizeof(resp))
+ return -ENOSPC;
+
+ if (copy_from_user(&cmd, inbuf, sizeof(cmd)))
+ return -EFAULT;
+
+ ctx = ucma_get_ctx(file, cmd.id);
+ if (IS_ERR(ctx))
+ return PTR_ERR(ctx);
+
+ mutex_lock(&file->mut);
+ mc = ucma_alloc_multicast(ctx);
+ if (IS_ERR(mc)) {
+ ret = PTR_ERR(mc);
+ goto err1;
+ }
+
+ mc->uid = cmd.uid;
+ memcpy(&mc->addr, &cmd.addr, sizeof cmd.addr);
+ ret = rdma_join_multicast(ctx->cm_id, &mc->addr, mc);
+ if (ret)
+ goto err2;
+
+ resp.id = mc->id;
+ if (copy_to_user((void __user *)(unsigned long)cmd.response,
+ &resp, sizeof(resp))) {
+ ret = -EFAULT;
+ goto err3;
+ }
+
+ mutex_unlock(&file->mut);
+ ucma_put_ctx(ctx);
+ return 0;
+
+err3:
+ rdma_leave_multicast(ctx->cm_id, &mc->addr);
+ ucma_cleanup_mc_events(mc);
+err2:
+ mutex_lock(&mut);
+ idr_remove(&multicast_idr, mc->id);
+ mutex_unlock(&mut);
+ list_del(&mc->list);
+ kfree(mc);
+err1:
+ mutex_unlock(&file->mut);
+ ucma_put_ctx(ctx);
+ return ret;
+}
+
+static ssize_t ucma_leave_multicast(struct ucma_file *file,
+ const char __user *inbuf,
+ int in_len, int out_len)
+{
+ struct rdma_ucm_destroy_id cmd;
+ struct rdma_ucm_destroy_id_resp resp;
+ struct ucma_multicast *mc;
+ int ret = 0;
+
+ if (out_len < sizeof(resp))
+ return -ENOSPC;
+
+ if (copy_from_user(&cmd, inbuf, sizeof(cmd)))
+ return -EFAULT;
+
+ mutex_lock(&mut);
+ mc = idr_find(&multicast_idr, cmd.id);
+ if (!mc)
+ mc = ERR_PTR(-ENOENT);
+ else if (mc->ctx->file != file)
+ mc = ERR_PTR(-EINVAL);
+ else {
+ idr_remove(&multicast_idr, mc->id);
+ atomic_inc(&mc->ctx->ref);
+ }
+ mutex_unlock(&mut);
+
+ if (IS_ERR(mc)) {
+ ret = PTR_ERR(mc);
+ goto out;
+ }
+
+ rdma_leave_multicast(mc->ctx->cm_id, &mc->addr);
+ mutex_lock(&mc->ctx->file->mut);
+ ucma_cleanup_mc_events(mc);
+ list_del(&mc->list);
+ mutex_unlock(&mc->ctx->file->mut);
+
+ ucma_put_ctx(mc->ctx);
+ resp.events_reported = mc->events_reported;
+ kfree(mc);
+
+ if (copy_to_user((void __user *)(unsigned long)cmd.response,
+ &resp, sizeof(resp)))
+ ret = -EFAULT;
+out:
+ return ret;
+}
+
static ssize_t (*ucma_cmd_table[])(struct ucma_file *file,
const char __user *inbuf,
int in_len, int out_len) = {
@@ -750,6 +946,8 @@
[RDMA_USER_CM_CMD_GET_OPTION] = NULL,
[RDMA_USER_CM_CMD_SET_OPTION] = NULL,
[RDMA_USER_CM_CMD_NOTIFY] = ucma_notify,
+ [RDMA_USER_CM_CMD_JOIN_MCAST] = ucma_join_multicast,
+ [RDMA_USER_CM_CMD_LEAVE_MCAST] = ucma_leave_multicast,
};
static ssize_t ucma_write(struct file *filp, const char __user *buf,
diff --git a/drivers/infiniband/hw/cxgb3/cxio_dbg.c b/drivers/infiniband/hw/cxgb3/cxio_dbg.c
index 5a7306f..75f7b16 100644
--- a/drivers/infiniband/hw/cxgb3/cxio_dbg.c
+++ b/drivers/infiniband/hw/cxgb3/cxio_dbg.c
@@ -1,6 +1,5 @@
/*
* Copyright (c) 2006 Chelsio, Inc. All rights reserved.
- * Copyright (c) 2006 Open Grid Computing, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
diff --git a/drivers/infiniband/hw/cxgb3/cxio_hal.c b/drivers/infiniband/hw/cxgb3/cxio_hal.c
index 82fa720..114ac3b 100644
--- a/drivers/infiniband/hw/cxgb3/cxio_hal.c
+++ b/drivers/infiniband/hw/cxgb3/cxio_hal.c
@@ -1,6 +1,5 @@
/*
* Copyright (c) 2006 Chelsio, Inc. All rights reserved.
- * Copyright (c) 2006 Open Grid Computing, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
diff --git a/drivers/infiniband/hw/cxgb3/cxio_hal.h b/drivers/infiniband/hw/cxgb3/cxio_hal.h
index 1b97e80..8ab04a7 100644
--- a/drivers/infiniband/hw/cxgb3/cxio_hal.h
+++ b/drivers/infiniband/hw/cxgb3/cxio_hal.h
@@ -1,6 +1,5 @@
/*
* Copyright (c) 2006 Chelsio, Inc. All rights reserved.
- * Copyright (c) 2006 Open Grid Computing, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
diff --git a/drivers/infiniband/hw/cxgb3/cxio_resource.c b/drivers/infiniband/hw/cxgb3/cxio_resource.c
index 997aa32..65bf577 100644
--- a/drivers/infiniband/hw/cxgb3/cxio_resource.c
+++ b/drivers/infiniband/hw/cxgb3/cxio_resource.c
@@ -1,6 +1,5 @@
/*
* Copyright (c) 2006 Chelsio, Inc. All rights reserved.
- * Copyright (c) 2006 Open Grid Computing, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
diff --git a/drivers/infiniband/hw/cxgb3/cxio_resource.h b/drivers/infiniband/hw/cxgb3/cxio_resource.h
index a6bbe83..a2703a3 100644
--- a/drivers/infiniband/hw/cxgb3/cxio_resource.h
+++ b/drivers/infiniband/hw/cxgb3/cxio_resource.h
@@ -1,6 +1,5 @@
/*
* Copyright (c) 2006 Chelsio, Inc. All rights reserved.
- * Copyright (c) 2006 Open Grid Computing, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
diff --git a/drivers/infiniband/hw/cxgb3/cxio_wr.h b/drivers/infiniband/hw/cxgb3/cxio_wr.h
index 103fc42..90d7b89 100644
--- a/drivers/infiniband/hw/cxgb3/cxio_wr.h
+++ b/drivers/infiniband/hw/cxgb3/cxio_wr.h
@@ -1,6 +1,5 @@
/*
* Copyright (c) 2006 Chelsio, Inc. All rights reserved.
- * Copyright (c) 2006 Open Grid Computing, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
diff --git a/drivers/infiniband/hw/cxgb3/iwch.c b/drivers/infiniband/hw/cxgb3/iwch.c
index 4611afa..0315c9d 100644
--- a/drivers/infiniband/hw/cxgb3/iwch.c
+++ b/drivers/infiniband/hw/cxgb3/iwch.c
@@ -1,6 +1,5 @@
/*
* Copyright (c) 2006 Chelsio, Inc. All rights reserved.
- * Copyright (c) 2006 Open Grid Computing, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
diff --git a/drivers/infiniband/hw/cxgb3/iwch.h b/drivers/infiniband/hw/cxgb3/iwch.h
index 6517ef8..caf4e60 100644
--- a/drivers/infiniband/hw/cxgb3/iwch.h
+++ b/drivers/infiniband/hw/cxgb3/iwch.h
@@ -1,6 +1,5 @@
/*
* Copyright (c) 2006 Chelsio, Inc. All rights reserved.
- * Copyright (c) 2006 Open Grid Computing, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
diff --git a/drivers/infiniband/hw/cxgb3/iwch_cm.c b/drivers/infiniband/hw/cxgb3/iwch_cm.c
index a522b1b..e5442e3 100644
--- a/drivers/infiniband/hw/cxgb3/iwch_cm.c
+++ b/drivers/infiniband/hw/cxgb3/iwch_cm.c
@@ -1,6 +1,5 @@
/*
* Copyright (c) 2006 Chelsio, Inc. All rights reserved.
- * Copyright (c) 2006 Open Grid Computing, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
diff --git a/drivers/infiniband/hw/cxgb3/iwch_cm.h b/drivers/infiniband/hw/cxgb3/iwch_cm.h
index 7c810d9..0c6f281 100644
--- a/drivers/infiniband/hw/cxgb3/iwch_cm.h
+++ b/drivers/infiniband/hw/cxgb3/iwch_cm.h
@@ -1,6 +1,5 @@
/*
* Copyright (c) 2006 Chelsio, Inc. All rights reserved.
- * Copyright (c) 2006 Open Grid Computing, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
diff --git a/drivers/infiniband/hw/cxgb3/iwch_cq.c b/drivers/infiniband/hw/cxgb3/iwch_cq.c
index 98b3bdb..d7624c1 100644
--- a/drivers/infiniband/hw/cxgb3/iwch_cq.c
+++ b/drivers/infiniband/hw/cxgb3/iwch_cq.c
@@ -1,6 +1,5 @@
/*
* Copyright (c) 2006 Chelsio, Inc. All rights reserved.
- * Copyright (c) 2006 Open Grid Computing, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
diff --git a/drivers/infiniband/hw/cxgb3/iwch_ev.c b/drivers/infiniband/hw/cxgb3/iwch_ev.c
index a6efa8f..54362af 100644
--- a/drivers/infiniband/hw/cxgb3/iwch_ev.c
+++ b/drivers/infiniband/hw/cxgb3/iwch_ev.c
@@ -1,6 +1,5 @@
/*
* Copyright (c) 2006 Chelsio, Inc. All rights reserved.
- * Copyright (c) 2006 Open Grid Computing, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
diff --git a/drivers/infiniband/hw/cxgb3/iwch_mem.c b/drivers/infiniband/hw/cxgb3/iwch_mem.c
index 2b6cd53..a6c2c4b 100644
--- a/drivers/infiniband/hw/cxgb3/iwch_mem.c
+++ b/drivers/infiniband/hw/cxgb3/iwch_mem.c
@@ -1,6 +1,5 @@
/*
* Copyright (c) 2006 Chelsio, Inc. All rights reserved.
- * Copyright (c) 2006 Open Grid Computing, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
diff --git a/drivers/infiniband/hw/cxgb3/iwch_provider.c b/drivers/infiniband/hw/cxgb3/iwch_provider.c
index 6861087..2aef122 100644
--- a/drivers/infiniband/hw/cxgb3/iwch_provider.c
+++ b/drivers/infiniband/hw/cxgb3/iwch_provider.c
@@ -1,6 +1,5 @@
/*
* Copyright (c) 2006 Chelsio, Inc. All rights reserved.
- * Copyright (c) 2006 Open Grid Computing, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
diff --git a/drivers/infiniband/hw/cxgb3/iwch_provider.h b/drivers/infiniband/hw/cxgb3/iwch_provider.h
index 61e3278..2af3e93 100644
--- a/drivers/infiniband/hw/cxgb3/iwch_provider.h
+++ b/drivers/infiniband/hw/cxgb3/iwch_provider.h
@@ -1,6 +1,5 @@
/*
* Copyright (c) 2006 Chelsio, Inc. All rights reserved.
- * Copyright (c) 2006 Open Grid Computing, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
diff --git a/drivers/infiniband/hw/cxgb3/iwch_qp.c b/drivers/infiniband/hw/cxgb3/iwch_qp.c
index e066727..4dda2f6 100644
--- a/drivers/infiniband/hw/cxgb3/iwch_qp.c
+++ b/drivers/infiniband/hw/cxgb3/iwch_qp.c
@@ -1,6 +1,5 @@
/*
* Copyright (c) 2006 Chelsio, Inc. All rights reserved.
- * Copyright (c) 2006 Open Grid Computing, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
@@ -846,6 +845,8 @@
break;
case IWCH_QP_STATE_TERMINATE:
qhp->attr.state = IWCH_QP_STATE_TERMINATE;
+ if (t3b_device(qhp->rhp))
+ cxio_set_wq_in_error(&qhp->wq);
if (!internal)
terminate = 1;
break;
diff --git a/drivers/infiniband/hw/cxgb3/iwch_user.h b/drivers/infiniband/hw/cxgb3/iwch_user.h
index c4e7fbe..cb7086f 100644
--- a/drivers/infiniband/hw/cxgb3/iwch_user.h
+++ b/drivers/infiniband/hw/cxgb3/iwch_user.h
@@ -1,6 +1,5 @@
/*
* Copyright (c) 2006 Chelsio, Inc. All rights reserved.
- * Copyright (c) 2006 Open Grid Computing, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
diff --git a/drivers/infiniband/hw/ehca/Kconfig b/drivers/infiniband/hw/ehca/Kconfig
index 727b10d..1a85459 100644
--- a/drivers/infiniband/hw/ehca/Kconfig
+++ b/drivers/infiniband/hw/ehca/Kconfig
@@ -7,11 +7,3 @@
To compile the driver as a module, choose M here. The module
will be called ib_ehca.
-config INFINIBAND_EHCA_SCALING
- bool "Scaling support (EXPERIMENTAL)"
- depends on IBMEBUS && INFINIBAND_EHCA && HOTPLUG_CPU && EXPERIMENTAL
- default y
- ---help---
- eHCA scaling support schedules the CQ callbacks to different CPUs.
-
- To enable this feature choose Y here.
diff --git a/drivers/infiniband/hw/ehca/ehca_classes.h b/drivers/infiniband/hw/ehca/ehca_classes.h
index cf95ee4..40404c9 100644
--- a/drivers/infiniband/hw/ehca/ehca_classes.h
+++ b/drivers/infiniband/hw/ehca/ehca_classes.h
@@ -42,8 +42,6 @@
#ifndef __EHCA_CLASSES_H__
#define __EHCA_CLASSES_H__
-#include "ehca_classes.h"
-#include "ipz_pt_fn.h"
struct ehca_module;
struct ehca_qp;
@@ -54,15 +52,23 @@
struct ehca_pd;
struct ehca_av;
-#ifdef CONFIG_PPC64
-#include "ehca_classes_pSeries.h"
-#endif
-
#include <rdma/ib_verbs.h>
#include <rdma/ib_user_verbs.h>
+#ifdef CONFIG_PPC64
+#include "ehca_classes_pSeries.h"
+#endif
+#include "ipz_pt_fn.h"
+#include "ehca_qes.h"
#include "ehca_irq.h"
+#define EHCA_EQE_CACHE_SIZE 20
+
+struct ehca_eqe_cache_entry {
+ struct ehca_eqe *eqe;
+ struct ehca_cq *cq;
+};
+
struct ehca_eq {
u32 length;
struct ipz_queue ipz_queue;
@@ -74,6 +80,8 @@
spinlock_t spinlock;
struct tasklet_struct interrupt_task;
u32 ist;
+ spinlock_t irq_spinlock;
+ struct ehca_eqe_cache_entry eqe_cache[EHCA_EQE_CACHE_SIZE];
};
struct ehca_sport {
@@ -269,6 +277,7 @@
extern int ehca_static_rate;
extern int ehca_port_act_time;
extern int ehca_use_hp_mr;
+extern int ehca_scaling_code;
struct ipzu_queue_resp {
u32 qe_size; /* queue entry size */
diff --git a/drivers/infiniband/hw/ehca/ehca_eq.c b/drivers/infiniband/hw/ehca/ehca_eq.c
index 24ceab0..4961eb8 100644
--- a/drivers/infiniband/hw/ehca/ehca_eq.c
+++ b/drivers/infiniband/hw/ehca/ehca_eq.c
@@ -61,6 +61,7 @@
struct ib_device *ib_dev = &shca->ib_device;
spin_lock_init(&eq->spinlock);
+ spin_lock_init(&eq->irq_spinlock);
eq->is_initialized = 0;
if (type != EHCA_EQ && type != EHCA_NEQ) {
diff --git a/drivers/infiniband/hw/ehca/ehca_hca.c b/drivers/infiniband/hw/ehca/ehca_hca.c
index b7be950..30eb45d 100644
--- a/drivers/infiniband/hw/ehca/ehca_hca.c
+++ b/drivers/infiniband/hw/ehca/ehca_hca.c
@@ -162,6 +162,9 @@
props->active_width = IB_WIDTH_12X;
props->active_speed = 0x1;
+ /* at the moment (logical) link state is always LINK_UP */
+ props->phys_state = 0x5;
+
query_port1:
ehca_free_fw_ctrlblock(rblock);
diff --git a/drivers/infiniband/hw/ehca/ehca_irq.c b/drivers/infiniband/hw/ehca/ehca_irq.c
index 6c4f9f9..3ec53c6 100644
--- a/drivers/infiniband/hw/ehca/ehca_irq.c
+++ b/drivers/infiniband/hw/ehca/ehca_irq.c
@@ -63,15 +63,11 @@
#define ERROR_DATA_LENGTH EHCA_BMASK_IBM(52,63)
#define ERROR_DATA_TYPE EHCA_BMASK_IBM(0,7)
-#ifdef CONFIG_INFINIBAND_EHCA_SCALING
-
static void queue_comp_task(struct ehca_cq *__cq);
static struct ehca_comp_pool* pool;
static struct notifier_block comp_pool_callback_nb;
-#endif
-
static inline void comp_event_callback(struct ehca_cq *cq)
{
if (!cq->ib_cq.comp_handler)
@@ -206,7 +202,7 @@
}
static void cq_event_callback(struct ehca_shca *shca,
- u64 eqe)
+ u64 eqe)
{
struct ehca_cq *cq;
unsigned long flags;
@@ -318,7 +314,7 @@
"disruptive port %x configuration change", port);
ehca_info(&shca->ib_device,
- "port %x is inactive.", port);
+ "port %x is inactive.", port);
event.device = &shca->ib_device;
event.event = IB_EVENT_PORT_ERR;
event.element.port_num = port;
@@ -326,7 +322,7 @@
ib_dispatch_event(&event);
ehca_info(&shca->ib_device,
- "port %x is active.", port);
+ "port %x is active.", port);
event.device = &shca->ib_device;
event.event = IB_EVENT_PORT_ACTIVE;
event.element.port_num = port;
@@ -401,115 +397,170 @@
return IRQ_HANDLED;
}
-void ehca_tasklet_eq(unsigned long data)
+
+static inline void process_eqe(struct ehca_shca *shca, struct ehca_eqe *eqe)
{
- struct ehca_shca *shca = (struct ehca_shca*)data;
- struct ehca_eqe *eqe;
- int int_state;
- int query_cnt = 0;
-
- do {
- eqe = (struct ehca_eqe *)ehca_poll_eq(shca, &shca->eq);
-
- if ((shca->hw_level >= 2) && eqe)
- int_state = 1;
- else
- int_state = 0;
-
- while ((int_state == 1) || eqe) {
- while (eqe) {
- u64 eqe_value = eqe->entry;
-
- ehca_dbg(&shca->ib_device,
- "eqe_value=%lx", eqe_value);
-
- /* TODO: better structure */
- if (EHCA_BMASK_GET(EQE_COMPLETION_EVENT,
- eqe_value)) {
- unsigned long flags;
- u32 token;
- struct ehca_cq *cq;
-
- ehca_dbg(&shca->ib_device,
- "... completion event");
- token =
- EHCA_BMASK_GET(EQE_CQ_TOKEN,
- eqe_value);
- spin_lock_irqsave(&ehca_cq_idr_lock,
- flags);
- cq = idr_find(&ehca_cq_idr, token);
-
- if (cq == NULL) {
- spin_unlock_irqrestore(&ehca_cq_idr_lock,
- flags);
- break;
- }
-
- reset_eq_pending(cq);
-#ifdef CONFIG_INFINIBAND_EHCA_SCALING
- queue_comp_task(cq);
- spin_unlock_irqrestore(&ehca_cq_idr_lock,
- flags);
-#else
- spin_unlock_irqrestore(&ehca_cq_idr_lock,
- flags);
- comp_event_callback(cq);
-#endif
- } else {
- ehca_dbg(&shca->ib_device,
- "... non completion event");
- parse_identifier(shca, eqe_value);
- }
- eqe =
- (struct ehca_eqe *)ehca_poll_eq(shca,
- &shca->eq);
- }
-
- if (shca->hw_level >= 2) {
- int_state =
- hipz_h_query_int_state(shca->ipz_hca_handle,
- shca->eq.ist);
- query_cnt++;
- iosync();
- if (query_cnt >= 100) {
- query_cnt = 0;
- int_state = 0;
- }
- }
- eqe = (struct ehca_eqe *)ehca_poll_eq(shca, &shca->eq);
-
+ u64 eqe_value;
+ u32 token;
+ unsigned long flags;
+ struct ehca_cq *cq;
+ eqe_value = eqe->entry;
+ ehca_dbg(&shca->ib_device, "eqe_value=%lx", eqe_value);
+ if (EHCA_BMASK_GET(EQE_COMPLETION_EVENT, eqe_value)) {
+ ehca_dbg(&shca->ib_device, "... completion event");
+ token = EHCA_BMASK_GET(EQE_CQ_TOKEN, eqe_value);
+ spin_lock_irqsave(&ehca_cq_idr_lock, flags);
+ cq = idr_find(&ehca_cq_idr, token);
+ if (cq == NULL) {
+ spin_unlock_irqrestore(&ehca_cq_idr_lock, flags);
+ ehca_err(&shca->ib_device,
+ "Invalid eqe for non-existing cq token=%x",
+ token);
+ return;
}
- } while (int_state != 0);
-
- return;
+ reset_eq_pending(cq);
+ if (ehca_scaling_code) {
+ queue_comp_task(cq);
+ spin_unlock_irqrestore(&ehca_cq_idr_lock, flags);
+ } else {
+ spin_unlock_irqrestore(&ehca_cq_idr_lock, flags);
+ comp_event_callback(cq);
+ }
+ } else {
+ ehca_dbg(&shca->ib_device,
+ "Got non completion event");
+ parse_identifier(shca, eqe_value);
+ }
}
-#ifdef CONFIG_INFINIBAND_EHCA_SCALING
+void ehca_process_eq(struct ehca_shca *shca, int is_irq)
+{
+ struct ehca_eq *eq = &shca->eq;
+ struct ehca_eqe_cache_entry *eqe_cache = eq->eqe_cache;
+ u64 eqe_value;
+ unsigned long flags;
+ int eqe_cnt, i;
+ int eq_empty = 0;
+
+ spin_lock_irqsave(&eq->irq_spinlock, flags);
+ if (is_irq) {
+ const int max_query_cnt = 100;
+ int query_cnt = 0;
+ int int_state = 1;
+ do {
+ int_state = hipz_h_query_int_state(
+ shca->ipz_hca_handle, eq->ist);
+ query_cnt++;
+ iosync();
+ } while (int_state && query_cnt < max_query_cnt);
+ if (unlikely((query_cnt == max_query_cnt)))
+ ehca_dbg(&shca->ib_device, "int_state=%x query_cnt=%x",
+ int_state, query_cnt);
+ }
+
+ /* read out all eqes */
+ eqe_cnt = 0;
+ do {
+ u32 token;
+ eqe_cache[eqe_cnt].eqe =
+ (struct ehca_eqe *)ehca_poll_eq(shca, eq);
+ if (!eqe_cache[eqe_cnt].eqe)
+ break;
+ eqe_value = eqe_cache[eqe_cnt].eqe->entry;
+ if (EHCA_BMASK_GET(EQE_COMPLETION_EVENT, eqe_value)) {
+ token = EHCA_BMASK_GET(EQE_CQ_TOKEN, eqe_value);
+ spin_lock(&ehca_cq_idr_lock);
+ eqe_cache[eqe_cnt].cq = idr_find(&ehca_cq_idr, token);
+ if (!eqe_cache[eqe_cnt].cq) {
+ spin_unlock(&ehca_cq_idr_lock);
+ ehca_err(&shca->ib_device,
+ "Invalid eqe for non-existing cq "
+ "token=%x", token);
+ continue;
+ }
+ spin_unlock(&ehca_cq_idr_lock);
+ } else
+ eqe_cache[eqe_cnt].cq = NULL;
+ eqe_cnt++;
+ } while (eqe_cnt < EHCA_EQE_CACHE_SIZE);
+ if (!eqe_cnt) {
+ if (is_irq)
+ ehca_dbg(&shca->ib_device,
+ "No eqe found for irq event");
+ goto unlock_irq_spinlock;
+ } else if (!is_irq)
+ ehca_dbg(&shca->ib_device, "deadman found %x eqe", eqe_cnt);
+ if (unlikely(eqe_cnt == EHCA_EQE_CACHE_SIZE))
+ ehca_dbg(&shca->ib_device, "too many eqes for one irq event");
+ /* enable irq for new packets */
+ for (i = 0; i < eqe_cnt; i++) {
+ if (eq->eqe_cache[i].cq)
+ reset_eq_pending(eq->eqe_cache[i].cq);
+ }
+ /* check eq */
+ spin_lock(&eq->spinlock);
+ eq_empty = (!ipz_eqit_eq_peek_valid(&shca->eq.ipz_queue));
+ spin_unlock(&eq->spinlock);
+ /* call completion handler for cached eqes */
+ for (i = 0; i < eqe_cnt; i++)
+ if (eq->eqe_cache[i].cq) {
+ if (ehca_scaling_code) {
+ spin_lock(&ehca_cq_idr_lock);
+ queue_comp_task(eq->eqe_cache[i].cq);
+ spin_unlock(&ehca_cq_idr_lock);
+ } else
+ comp_event_callback(eq->eqe_cache[i].cq);
+ } else {
+ ehca_dbg(&shca->ib_device, "Got non completion event");
+ parse_identifier(shca, eq->eqe_cache[i].eqe->entry);
+ }
+ /* poll eq if not empty */
+ if (eq_empty)
+ goto unlock_irq_spinlock;
+ do {
+ struct ehca_eqe *eqe;
+ eqe = (struct ehca_eqe *)ehca_poll_eq(shca, &shca->eq);
+ if (!eqe)
+ break;
+ process_eqe(shca, eqe);
+ eqe_cnt++;
+ } while (1);
+
+unlock_irq_spinlock:
+ spin_unlock_irqrestore(&eq->irq_spinlock, flags);
+}
+
+void ehca_tasklet_eq(unsigned long data)
+{
+ ehca_process_eq((struct ehca_shca*)data, 1);
+}
static inline int find_next_online_cpu(struct ehca_comp_pool* pool)
{
- unsigned long flags_last_cpu;
+ int cpu;
+ unsigned long flags;
+ WARN_ON_ONCE(!in_interrupt());
if (ehca_debug_level)
ehca_dmp(&cpu_online_map, sizeof(cpumask_t), "");
- spin_lock_irqsave(&pool->last_cpu_lock, flags_last_cpu);
- pool->last_cpu = next_cpu(pool->last_cpu, cpu_online_map);
- if (pool->last_cpu == NR_CPUS)
- pool->last_cpu = first_cpu(cpu_online_map);
- spin_unlock_irqrestore(&pool->last_cpu_lock, flags_last_cpu);
+ spin_lock_irqsave(&pool->last_cpu_lock, flags);
+ cpu = next_cpu(pool->last_cpu, cpu_online_map);
+ if (cpu == NR_CPUS)
+ cpu = first_cpu(cpu_online_map);
+ pool->last_cpu = cpu;
+ spin_unlock_irqrestore(&pool->last_cpu_lock, flags);
- return pool->last_cpu;
+ return cpu;
}
static void __queue_comp_task(struct ehca_cq *__cq,
struct ehca_cpu_comp_task *cct)
{
- unsigned long flags_cct;
- unsigned long flags_cq;
+ unsigned long flags;
- spin_lock_irqsave(&cct->task_lock, flags_cct);
- spin_lock_irqsave(&__cq->task_lock, flags_cq);
+ spin_lock_irqsave(&cct->task_lock, flags);
+ spin_lock(&__cq->task_lock);
if (__cq->nr_callbacks == 0) {
__cq->nr_callbacks++;
@@ -520,8 +571,8 @@
else
__cq->nr_callbacks++;
- spin_unlock_irqrestore(&__cq->task_lock, flags_cq);
- spin_unlock_irqrestore(&cct->task_lock, flags_cct);
+ spin_unlock(&__cq->task_lock);
+ spin_unlock_irqrestore(&cct->task_lock, flags);
}
static void queue_comp_task(struct ehca_cq *__cq)
@@ -532,69 +583,69 @@
cpu = get_cpu();
cpu_id = find_next_online_cpu(pool);
-
BUG_ON(!cpu_online(cpu_id));
cct = per_cpu_ptr(pool->cpu_comp_tasks, cpu_id);
+ BUG_ON(!cct);
if (cct->cq_jobs > 0) {
cpu_id = find_next_online_cpu(pool);
cct = per_cpu_ptr(pool->cpu_comp_tasks, cpu_id);
+ BUG_ON(!cct);
}
__queue_comp_task(__cq, cct);
-
- put_cpu();
-
- return;
}
static void run_comp_task(struct ehca_cpu_comp_task* cct)
{
struct ehca_cq *cq;
- unsigned long flags_cct;
- unsigned long flags_cq;
+ unsigned long flags;
- spin_lock_irqsave(&cct->task_lock, flags_cct);
+ spin_lock_irqsave(&cct->task_lock, flags);
while (!list_empty(&cct->cq_list)) {
cq = list_entry(cct->cq_list.next, struct ehca_cq, entry);
- spin_unlock_irqrestore(&cct->task_lock, flags_cct);
+ spin_unlock_irqrestore(&cct->task_lock, flags);
comp_event_callback(cq);
- spin_lock_irqsave(&cct->task_lock, flags_cct);
+ spin_lock_irqsave(&cct->task_lock, flags);
- spin_lock_irqsave(&cq->task_lock, flags_cq);
+ spin_lock(&cq->task_lock);
cq->nr_callbacks--;
if (cq->nr_callbacks == 0) {
list_del_init(cct->cq_list.next);
cct->cq_jobs--;
}
- spin_unlock_irqrestore(&cq->task_lock, flags_cq);
-
+ spin_unlock(&cq->task_lock);
}
- spin_unlock_irqrestore(&cct->task_lock, flags_cct);
-
- return;
+ spin_unlock_irqrestore(&cct->task_lock, flags);
}
static int comp_task(void *__cct)
{
struct ehca_cpu_comp_task* cct = __cct;
+ int cql_empty;
DECLARE_WAITQUEUE(wait, current);
set_current_state(TASK_INTERRUPTIBLE);
while(!kthread_should_stop()) {
add_wait_queue(&cct->wait_queue, &wait);
- if (list_empty(&cct->cq_list))
+ spin_lock_irq(&cct->task_lock);
+ cql_empty = list_empty(&cct->cq_list);
+ spin_unlock_irq(&cct->task_lock);
+ if (cql_empty)
schedule();
else
__set_current_state(TASK_RUNNING);
remove_wait_queue(&cct->wait_queue, &wait);
- if (!list_empty(&cct->cq_list))
+ spin_lock_irq(&cct->task_lock);
+ cql_empty = list_empty(&cct->cq_list);
+ spin_unlock_irq(&cct->task_lock);
+ if (!cql_empty)
run_comp_task(__cct);
set_current_state(TASK_INTERRUPTIBLE);
@@ -637,8 +688,6 @@
if (task)
kthread_stop(task);
-
- return;
}
static void take_over_work(struct ehca_comp_pool *pool,
@@ -654,11 +703,11 @@
list_splice_init(&cct->cq_list, &list);
while(!list_empty(&list)) {
- cq = list_entry(cct->cq_list.next, struct ehca_cq, entry);
+ cq = list_entry(cct->cq_list.next, struct ehca_cq, entry);
- list_del(&cq->entry);
- __queue_comp_task(cq, per_cpu_ptr(pool->cpu_comp_tasks,
- smp_processor_id()));
+ list_del(&cq->entry);
+ __queue_comp_task(cq, per_cpu_ptr(pool->cpu_comp_tasks,
+ smp_processor_id()));
}
spin_unlock_irqrestore(&cct->task_lock, flags_cct);
@@ -708,14 +757,14 @@
return NOTIFY_OK;
}
-#endif
-
int ehca_create_comp_pool(void)
{
-#ifdef CONFIG_INFINIBAND_EHCA_SCALING
int cpu;
struct task_struct *task;
+ if (!ehca_scaling_code)
+ return 0;
+
pool = kzalloc(sizeof(struct ehca_comp_pool), GFP_KERNEL);
if (pool == NULL)
return -ENOMEM;
@@ -740,16 +789,19 @@
comp_pool_callback_nb.notifier_call = comp_pool_callback;
comp_pool_callback_nb.priority =0;
register_cpu_notifier(&comp_pool_callback_nb);
-#endif
+
+ printk(KERN_INFO "eHCA scaling code enabled\n");
return 0;
}
void ehca_destroy_comp_pool(void)
{
-#ifdef CONFIG_INFINIBAND_EHCA_SCALING
int i;
+ if (!ehca_scaling_code)
+ return;
+
unregister_cpu_notifier(&comp_pool_callback_nb);
for (i = 0; i < NR_CPUS; i++) {
@@ -758,7 +810,4 @@
}
free_percpu(pool->cpu_comp_tasks);
kfree(pool);
-#endif
-
- return;
}
diff --git a/drivers/infiniband/hw/ehca/ehca_irq.h b/drivers/infiniband/hw/ehca/ehca_irq.h
index be579cc..6ed06ee 100644
--- a/drivers/infiniband/hw/ehca/ehca_irq.h
+++ b/drivers/infiniband/hw/ehca/ehca_irq.h
@@ -56,6 +56,7 @@
irqreturn_t ehca_interrupt_eq(int irq, void *dev_id);
void ehca_tasklet_eq(unsigned long data);
+void ehca_process_eq(struct ehca_shca *shca, int is_irq);
struct ehca_cpu_comp_task {
wait_queue_head_t wait_queue;
diff --git a/drivers/infiniband/hw/ehca/ehca_main.c b/drivers/infiniband/hw/ehca/ehca_main.c
index 1155bcf..c183512 100644
--- a/drivers/infiniband/hw/ehca/ehca_main.c
+++ b/drivers/infiniband/hw/ehca/ehca_main.c
@@ -52,7 +52,7 @@
MODULE_LICENSE("Dual BSD/GPL");
MODULE_AUTHOR("Christoph Raisch <raisch@de.ibm.com>");
MODULE_DESCRIPTION("IBM eServer HCA InfiniBand Device Driver");
-MODULE_VERSION("SVNEHCA_0020");
+MODULE_VERSION("SVNEHCA_0021");
int ehca_open_aqp1 = 0;
int ehca_debug_level = 0;
@@ -62,6 +62,7 @@
int ehca_port_act_time = 30;
int ehca_poll_all_eqs = 1;
int ehca_static_rate = -1;
+int ehca_scaling_code = 1;
module_param_named(open_aqp1, ehca_open_aqp1, int, 0);
module_param_named(debug_level, ehca_debug_level, int, 0);
@@ -71,6 +72,7 @@
module_param_named(port_act_time, ehca_port_act_time, int, 0);
module_param_named(poll_all_eqs, ehca_poll_all_eqs, int, 0);
module_param_named(static_rate, ehca_static_rate, int, 0);
+module_param_named(scaling_code, ehca_scaling_code, int, 0);
MODULE_PARM_DESC(open_aqp1,
"AQP1 on startup (0: no (default), 1: yes)");
@@ -91,6 +93,8 @@
" (0: no, 1: yes (default))");
MODULE_PARM_DESC(static_rate,
"set permanent static rate (default: disabled)");
+MODULE_PARM_DESC(scaling_code,
+ "set scaling code (0: disabled, 1: enabled/default)");
spinlock_t ehca_qp_idr_lock;
spinlock_t ehca_cq_idr_lock;
@@ -432,8 +436,8 @@
static ssize_t ehca_show_debug_level(struct device_driver *ddp, char *buf)
{
- return snprintf(buf, PAGE_SIZE, "%d\n",
- ehca_debug_level);
+ return snprintf(buf, PAGE_SIZE, "%d\n",
+ ehca_debug_level);
}
static ssize_t ehca_store_debug_level(struct device_driver *ddp,
@@ -778,8 +782,24 @@
spin_lock(&shca_list_lock);
list_for_each_entry(shca, &shca_list, shca_list) {
- if (shca->eq.is_initialized)
- ehca_tasklet_eq((unsigned long)(void*)shca);
+ if (shca->eq.is_initialized) {
+ /* call deadman proc only if eq ptr does not change */
+ struct ehca_eq *eq = &shca->eq;
+ int max = 3;
+ volatile u64 q_ofs, q_ofs2;
+ u64 flags;
+ spin_lock_irqsave(&eq->spinlock, flags);
+ q_ofs = eq->ipz_queue.current_q_offset;
+ spin_unlock_irqrestore(&eq->spinlock, flags);
+ do {
+ spin_lock_irqsave(&eq->spinlock, flags);
+ q_ofs2 = eq->ipz_queue.current_q_offset;
+ spin_unlock_irqrestore(&eq->spinlock, flags);
+ max--;
+ } while (q_ofs == q_ofs2 && max > 0);
+ if (q_ofs == q_ofs2)
+ ehca_process_eq(shca, 0);
+ }
}
mod_timer(&poll_eqs_timer, jiffies + HZ);
spin_unlock(&shca_list_lock);
@@ -790,7 +810,7 @@
int ret;
printk(KERN_INFO "eHCA Infiniband Device Driver "
- "(Rel.: SVNEHCA_0020)\n");
+ "(Rel.: SVNEHCA_0021)\n");
idr_init(&ehca_qp_idr);
idr_init(&ehca_cq_idr);
spin_lock_init(&ehca_qp_idr_lock);
diff --git a/drivers/infiniband/hw/ehca/ipz_pt_fn.h b/drivers/infiniband/hw/ehca/ipz_pt_fn.h
index dc3bda2..8199c45 100644
--- a/drivers/infiniband/hw/ehca/ipz_pt_fn.h
+++ b/drivers/infiniband/hw/ehca/ipz_pt_fn.h
@@ -79,7 +79,7 @@
if (q_offset >= queue->queue_length)
return NULL;
current_page = (queue->queue_pages)[q_offset >> EHCA_PAGESHIFT];
- return ¤t_page->entries[q_offset & (EHCA_PAGESIZE - 1)];
+ return ¤t_page->entries[q_offset & (EHCA_PAGESIZE - 1)];
}
/*
@@ -247,6 +247,15 @@
return ret;
}
+static inline void *ipz_eqit_eq_peek_valid(struct ipz_queue *queue)
+{
+ void *ret = ipz_qeit_get(queue);
+ u32 qe = *(u8 *) ret;
+ if ((qe >> 7) != (queue->toggle_state & 1))
+ return NULL;
+ return ret;
+}
+
/* returns address (GX) of first queue entry */
static inline u64 ipz_qpt_get_firstpage(struct ipz_qpt *qpt)
{
diff --git a/drivers/infiniband/hw/ipath/ipath_dma.c b/drivers/infiniband/hw/ipath/ipath_dma.c
index 6e0f2b8..f6f9490 100644
--- a/drivers/infiniband/hw/ipath/ipath_dma.c
+++ b/drivers/infiniband/hw/ipath/ipath_dma.c
@@ -96,8 +96,8 @@
BUG_ON(!valid_dma_direction(direction));
}
-int ipath_map_sg(struct ib_device *dev, struct scatterlist *sg, int nents,
- enum dma_data_direction direction)
+static int ipath_map_sg(struct ib_device *dev, struct scatterlist *sg, int nents,
+ enum dma_data_direction direction)
{
u64 addr;
int i;
diff --git a/drivers/infiniband/hw/mthca/mthca_memfree.c b/drivers/infiniband/hw/mthca/mthca_memfree.c
index 0b9d053..48f7c65 100644
--- a/drivers/infiniband/hw/mthca/mthca_memfree.c
+++ b/drivers/infiniband/hw/mthca/mthca_memfree.c
@@ -175,7 +175,9 @@
if (!ret) {
++chunk->npages;
- if (!coherent && chunk->npages == MTHCA_ICM_CHUNK_LEN) {
+ if (coherent)
+ ++chunk->nsg;
+ else if (chunk->npages == MTHCA_ICM_CHUNK_LEN) {
chunk->nsg = pci_map_sg(dev->pdev, chunk->mem,
chunk->npages,
PCI_DMA_BIDIRECTIONAL);
diff --git a/drivers/infiniband/hw/mthca/mthca_qp.c b/drivers/infiniband/hw/mthca/mthca_qp.c
index 224c93d..71dc84b 100644
--- a/drivers/infiniband/hw/mthca/mthca_qp.c
+++ b/drivers/infiniband/hw/mthca/mthca_qp.c
@@ -573,6 +573,11 @@
goto out;
}
+ if (cur_state == new_state && cur_state == IB_QPS_RESET) {
+ err = 0;
+ goto out;
+ }
+
if ((attr_mask & IB_QP_PKEY_INDEX) &&
attr->pkey_index >= dev->limits.pkey_table_len) {
mthca_dbg(dev, "P_Key index (%u) too large. max is %d\n",
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_cm.c b/drivers/infiniband/ulp/ipoib/ipoib_cm.c
index 2d48387..4d59682 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_cm.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_cm.c
@@ -145,7 +145,7 @@
for (; i >= 0; --i)
ib_dma_unmap_single(priv->ca, mapping[i + 1], PAGE_SIZE, DMA_FROM_DEVICE);
- kfree_skb(skb);
+ dev_kfree_skb_any(skb);
return -ENOMEM;
}
@@ -1138,7 +1138,7 @@
return -EINVAL;
}
-static DEVICE_ATTR(mode, S_IWUGO | S_IRUGO, show_mode, set_mode);
+static DEVICE_ATTR(mode, S_IWUSR | S_IRUGO, show_mode, set_mode);
int ipoib_cm_add_mode_attr(struct net_device *dev)
{
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c
index fea737f..b303ce6 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c
@@ -60,14 +60,11 @@
/* Used for all multicast joins (broadcast, IPv4 mcast and IPv6 mcast) */
struct ipoib_mcast {
struct ib_sa_mcmember_rec mcmember;
+ struct ib_sa_multicast *mc;
struct ipoib_ah *ah;
struct rb_node rb_node;
struct list_head list;
- struct completion done;
-
- int query_id;
- struct ib_sa_query *query;
unsigned long created;
unsigned long backoff;
@@ -299,18 +296,22 @@
return 0;
}
-static void
+static int
ipoib_mcast_sendonly_join_complete(int status,
- struct ib_sa_mcmember_rec *mcmember,
- void *mcast_ptr)
+ struct ib_sa_multicast *multicast)
{
- struct ipoib_mcast *mcast = mcast_ptr;
+ struct ipoib_mcast *mcast = multicast->context;
struct net_device *dev = mcast->dev;
struct ipoib_dev_priv *priv = netdev_priv(dev);
+ /* We trap for port events ourselves. */
+ if (status == -ENETRESET)
+ return 0;
+
if (!status)
- ipoib_mcast_join_finish(mcast, mcmember);
- else {
+ status = ipoib_mcast_join_finish(mcast, &multicast->rec);
+
+ if (status) {
if (mcast->logcount++ < 20)
ipoib_dbg_mcast(netdev_priv(dev), "multicast join failed for "
IPOIB_GID_FMT ", status %d\n",
@@ -325,11 +326,10 @@
spin_unlock_irq(&priv->tx_lock);
/* Clear the busy flag so we try again */
- clear_bit(IPOIB_MCAST_FLAG_BUSY, &mcast->flags);
- mcast->query = NULL;
+ status = test_and_clear_bit(IPOIB_MCAST_FLAG_BUSY,
+ &mcast->flags);
}
-
- complete(&mcast->done);
+ return status;
}
static int ipoib_mcast_sendonly_join(struct ipoib_mcast *mcast)
@@ -359,35 +359,33 @@
rec.port_gid = priv->local_gid;
rec.pkey = cpu_to_be16(priv->pkey);
- init_completion(&mcast->done);
-
- ret = ib_sa_mcmember_rec_set(&ipoib_sa_client, priv->ca, priv->port, &rec,
- IB_SA_MCMEMBER_REC_MGID |
- IB_SA_MCMEMBER_REC_PORT_GID |
- IB_SA_MCMEMBER_REC_PKEY |
- IB_SA_MCMEMBER_REC_JOIN_STATE,
- 1000, GFP_ATOMIC,
- ipoib_mcast_sendonly_join_complete,
- mcast, &mcast->query);
- if (ret < 0) {
- ipoib_warn(priv, "ib_sa_mcmember_rec_set failed (ret = %d)\n",
+ mcast->mc = ib_sa_join_multicast(&ipoib_sa_client, priv->ca,
+ priv->port, &rec,
+ IB_SA_MCMEMBER_REC_MGID |
+ IB_SA_MCMEMBER_REC_PORT_GID |
+ IB_SA_MCMEMBER_REC_PKEY |
+ IB_SA_MCMEMBER_REC_JOIN_STATE,
+ GFP_ATOMIC,
+ ipoib_mcast_sendonly_join_complete,
+ mcast);
+ if (IS_ERR(mcast->mc)) {
+ ret = PTR_ERR(mcast->mc);
+ clear_bit(IPOIB_MCAST_FLAG_BUSY, &mcast->flags);
+ ipoib_warn(priv, "ib_sa_join_multicast failed (ret = %d)\n",
ret);
} else {
ipoib_dbg_mcast(priv, "no multicast record for " IPOIB_GID_FMT
", starting join\n",
IPOIB_GID_ARG(mcast->mcmember.mgid));
-
- mcast->query_id = ret;
}
return ret;
}
-static void ipoib_mcast_join_complete(int status,
- struct ib_sa_mcmember_rec *mcmember,
- void *mcast_ptr)
+static int ipoib_mcast_join_complete(int status,
+ struct ib_sa_multicast *multicast)
{
- struct ipoib_mcast *mcast = mcast_ptr;
+ struct ipoib_mcast *mcast = multicast->context;
struct net_device *dev = mcast->dev;
struct ipoib_dev_priv *priv = netdev_priv(dev);
@@ -395,24 +393,25 @@
" (status %d)\n",
IPOIB_GID_ARG(mcast->mcmember.mgid), status);
- if (!status && !ipoib_mcast_join_finish(mcast, mcmember)) {
+ /* We trap for port events ourselves. */
+ if (status == -ENETRESET)
+ return 0;
+
+ if (!status)
+ status = ipoib_mcast_join_finish(mcast, &multicast->rec);
+
+ if (!status) {
mcast->backoff = 1;
mutex_lock(&mcast_mutex);
if (test_bit(IPOIB_MCAST_RUN, &priv->flags))
queue_delayed_work(ipoib_workqueue,
&priv->mcast_task, 0);
mutex_unlock(&mcast_mutex);
- complete(&mcast->done);
- return;
+ return 0;
}
- if (status == -EINTR) {
- complete(&mcast->done);
- return;
- }
-
- if (status && mcast->logcount++ < 20) {
- if (status == -ETIMEDOUT || status == -EINTR) {
+ if (mcast->logcount++ < 20) {
+ if (status == -ETIMEDOUT) {
ipoib_dbg_mcast(priv, "multicast join failed for " IPOIB_GID_FMT
", status %d\n",
IPOIB_GID_ARG(mcast->mcmember.mgid),
@@ -429,24 +428,18 @@
if (mcast->backoff > IPOIB_MAX_BACKOFF_SECONDS)
mcast->backoff = IPOIB_MAX_BACKOFF_SECONDS;
+ /* Clear the busy flag so we try again */
+ status = test_and_clear_bit(IPOIB_MCAST_FLAG_BUSY, &mcast->flags);
+
mutex_lock(&mcast_mutex);
-
spin_lock_irq(&priv->lock);
- mcast->query = NULL;
-
- if (test_bit(IPOIB_MCAST_RUN, &priv->flags)) {
- if (status == -ETIMEDOUT)
- queue_delayed_work(ipoib_workqueue, &priv->mcast_task,
- 0);
- else
- queue_delayed_work(ipoib_workqueue, &priv->mcast_task,
- mcast->backoff * HZ);
- } else
- complete(&mcast->done);
+ if (test_bit(IPOIB_MCAST_RUN, &priv->flags))
+ queue_delayed_work(ipoib_workqueue, &priv->mcast_task,
+ mcast->backoff * HZ);
spin_unlock_irq(&priv->lock);
mutex_unlock(&mcast_mutex);
- return;
+ return status;
}
static void ipoib_mcast_join(struct net_device *dev, struct ipoib_mcast *mcast,
@@ -495,15 +488,14 @@
rec.hop_limit = priv->broadcast->mcmember.hop_limit;
}
- init_completion(&mcast->done);
-
- ret = ib_sa_mcmember_rec_set(&ipoib_sa_client, priv->ca, priv->port,
- &rec, comp_mask, mcast->backoff * 1000,
- GFP_ATOMIC, ipoib_mcast_join_complete,
- mcast, &mcast->query);
-
- if (ret < 0) {
- ipoib_warn(priv, "ib_sa_mcmember_rec_set failed, status %d\n", ret);
+ set_bit(IPOIB_MCAST_FLAG_BUSY, &mcast->flags);
+ mcast->mc = ib_sa_join_multicast(&ipoib_sa_client, priv->ca, priv->port,
+ &rec, comp_mask, GFP_KERNEL,
+ ipoib_mcast_join_complete, mcast);
+ if (IS_ERR(mcast->mc)) {
+ clear_bit(IPOIB_MCAST_FLAG_BUSY, &mcast->flags);
+ ret = PTR_ERR(mcast->mc);
+ ipoib_warn(priv, "ib_sa_join_multicast failed, status %d\n", ret);
mcast->backoff *= 2;
if (mcast->backoff > IPOIB_MAX_BACKOFF_SECONDS)
@@ -515,8 +507,7 @@
&priv->mcast_task,
mcast->backoff * HZ);
mutex_unlock(&mcast_mutex);
- } else
- mcast->query_id = ret;
+ }
}
void ipoib_mcast_join_task(struct work_struct *work)
@@ -541,7 +532,7 @@
priv->local_rate = attr.active_speed *
ib_width_enum_to_int(attr.active_width);
} else
- ipoib_warn(priv, "ib_query_port failed\n");
+ ipoib_warn(priv, "ib_query_port failed\n");
}
if (!priv->broadcast) {
@@ -568,7 +559,8 @@
}
if (!test_bit(IPOIB_MCAST_FLAG_ATTACHED, &priv->broadcast->flags)) {
- ipoib_mcast_join(dev, priv->broadcast, 0);
+ if (!test_bit(IPOIB_MCAST_FLAG_BUSY, &priv->broadcast->flags))
+ ipoib_mcast_join(dev, priv->broadcast, 0);
return;
}
@@ -625,26 +617,9 @@
return 0;
}
-static void wait_for_mcast_join(struct ipoib_dev_priv *priv,
- struct ipoib_mcast *mcast)
-{
- spin_lock_irq(&priv->lock);
- if (mcast && mcast->query) {
- ib_sa_cancel_query(mcast->query_id, mcast->query);
- mcast->query = NULL;
- spin_unlock_irq(&priv->lock);
- ipoib_dbg_mcast(priv, "waiting for MGID " IPOIB_GID_FMT "\n",
- IPOIB_GID_ARG(mcast->mcmember.mgid));
- wait_for_completion(&mcast->done);
- }
- else
- spin_unlock_irq(&priv->lock);
-}
-
int ipoib_mcast_stop_thread(struct net_device *dev, int flush)
{
struct ipoib_dev_priv *priv = netdev_priv(dev);
- struct ipoib_mcast *mcast;
ipoib_dbg_mcast(priv, "stopping multicast thread\n");
@@ -660,52 +635,27 @@
if (flush)
flush_workqueue(ipoib_workqueue);
- wait_for_mcast_join(priv, priv->broadcast);
-
- list_for_each_entry(mcast, &priv->multicast_list, list)
- wait_for_mcast_join(priv, mcast);
-
return 0;
}
static int ipoib_mcast_leave(struct net_device *dev, struct ipoib_mcast *mcast)
{
struct ipoib_dev_priv *priv = netdev_priv(dev);
- struct ib_sa_mcmember_rec rec = {
- .join_state = 1
- };
int ret = 0;
- if (!test_and_clear_bit(IPOIB_MCAST_FLAG_ATTACHED, &mcast->flags))
- return 0;
+ if (test_and_clear_bit(IPOIB_MCAST_FLAG_ATTACHED, &mcast->flags)) {
+ ipoib_dbg_mcast(priv, "leaving MGID " IPOIB_GID_FMT "\n",
+ IPOIB_GID_ARG(mcast->mcmember.mgid));
- ipoib_dbg_mcast(priv, "leaving MGID " IPOIB_GID_FMT "\n",
- IPOIB_GID_ARG(mcast->mcmember.mgid));
+ /* Remove ourselves from the multicast group */
+ ret = ipoib_mcast_detach(dev, be16_to_cpu(mcast->mcmember.mlid),
+ &mcast->mcmember.mgid);
+ if (ret)
+ ipoib_warn(priv, "ipoib_mcast_detach failed (result = %d)\n", ret);
+ }
- rec.mgid = mcast->mcmember.mgid;
- rec.port_gid = priv->local_gid;
- rec.pkey = cpu_to_be16(priv->pkey);
-
- /* Remove ourselves from the multicast group */
- ret = ipoib_mcast_detach(dev, be16_to_cpu(mcast->mcmember.mlid),
- &mcast->mcmember.mgid);
- if (ret)
- ipoib_warn(priv, "ipoib_mcast_detach failed (result = %d)\n", ret);
-
- /*
- * Just make one shot at leaving and don't wait for a reply;
- * if we fail, too bad.
- */
- ret = ib_sa_mcmember_rec_delete(&ipoib_sa_client, priv->ca, priv->port, &rec,
- IB_SA_MCMEMBER_REC_MGID |
- IB_SA_MCMEMBER_REC_PORT_GID |
- IB_SA_MCMEMBER_REC_PKEY |
- IB_SA_MCMEMBER_REC_JOIN_STATE,
- 0, GFP_ATOMIC, NULL,
- mcast, &mcast->query);
- if (ret < 0)
- ipoib_warn(priv, "ib_sa_mcmember_rec_delete failed "
- "for leave (result = %d)\n", ret);
+ if (test_and_clear_bit(IPOIB_MCAST_FLAG_BUSY, &mcast->flags))
+ ib_sa_free_multicast(mcast->mc);
return 0;
}
@@ -758,7 +708,7 @@
dev_kfree_skb_any(skb);
}
- if (mcast->query)
+ if (test_bit(IPOIB_MCAST_FLAG_BUSY, &mcast->flags))
ipoib_dbg_mcast(priv, "no address vector, "
"but multicast join already started\n");
else if (test_bit(IPOIB_MCAST_FLAG_SENDONLY, &mcast->flags))
@@ -916,7 +866,6 @@
/* We have to cancel outside of the spinlock */
list_for_each_entry_safe(mcast, tmcast, &remove_list, list) {
- wait_for_mcast_join(priv, mcast);
ipoib_mcast_leave(mcast->dev, mcast);
ipoib_mcast_free(mcast);
}
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index bedae4a..80b199f 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -107,4 +107,19 @@
If you have an MSI S270 laptop, say Y or M here.
+config SONY_LAPTOP
+ tristate "Sony Laptop Extras"
+ depends on X86 && ACPI
+ select BACKLIGHT_CLASS_DEVICE
+ ---help---
+ This mini-driver drives the SNC device present in the ACPI BIOS of
+ the Sony Vaio laptops.
+
+ It gives access to some extra laptop functionalities. In its current
+ form, this driver let the user set or query the screen brightness
+ through the backlight subsystem and remove/apply power to some
+ devices.
+
+ Read <file:Documentation/sony-laptop.txt> for more information.
+
endmenu
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 35da53c..7793ccd 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -11,3 +11,4 @@
obj-$(CONFIG_TIFM_CORE) += tifm_core.o
obj-$(CONFIG_TIFM_7XX1) += tifm_7xx1.o
obj-$(CONFIG_SGI_IOC4) += ioc4.o
+obj-$(CONFIG_SONY_LAPTOP) += sony-laptop.o
diff --git a/drivers/misc/asus-laptop.c b/drivers/misc/asus-laptop.c
index 861c399..e4e2b70 100644
--- a/drivers/misc/asus-laptop.c
+++ b/drivers/misc/asus-laptop.c
@@ -1088,11 +1088,6 @@
if (acpi_disabled)
return -ENODEV;
- if (!acpi_specific_hotkey_enabled) {
- printk(ASUS_ERR "Using generic hotkey driver\n");
- return -ENODEV;
- }
-
result = acpi_bus_register_driver(&asus_hotk_driver);
if (result < 0)
return result;
diff --git a/drivers/misc/sony-laptop.c b/drivers/misc/sony-laptop.c
new file mode 100644
index 0000000..cabbed0
--- /dev/null
+++ b/drivers/misc/sony-laptop.c
@@ -0,0 +1,562 @@
+/*
+ * ACPI Sony Notebook Control Driver (SNC)
+ *
+ * Copyright (C) 2004-2005 Stelian Pop <stelian@popies.net>
+ * Copyright (C) 2007 Mattia Dongili <malattia@linux.it>
+ *
+ * Parts of this driver inspired from asus_acpi.c and ibm_acpi.c
+ * which are copyrighted by their respective authors.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/backlight.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <acpi/acpi_drivers.h>
+#include <acpi/acpi_bus.h>
+#include <asm/uaccess.h>
+
+#define ACPI_SNC_CLASS "sony"
+#define ACPI_SNC_HID "SNY5001"
+#define ACPI_SNC_DRIVER_NAME "ACPI Sony Notebook Control Driver v0.4"
+
+/* the device uses 1-based values, while the backlight subsystem uses
+ 0-based values */
+#define SONY_MAX_BRIGHTNESS 8
+
+#define LOG_PFX KERN_WARNING "sony-laptop: "
+
+MODULE_AUTHOR("Stelian Pop, Mattia Dongili");
+MODULE_DESCRIPTION(ACPI_SNC_DRIVER_NAME);
+MODULE_LICENSE("GPL");
+
+static int debug;
+module_param(debug, int, 0);
+MODULE_PARM_DESC(debug, "set this to 1 (and RTFM) if you want to help "
+ "the development of this driver");
+
+static ssize_t sony_acpi_show(struct device *, struct device_attribute *,
+ char *);
+static ssize_t sony_acpi_store(struct device *, struct device_attribute *,
+ const char *, size_t);
+static int boolean_validate(const int, const int);
+static int brightness_default_validate(const int, const int);
+
+#define SNC_VALIDATE_IN 0
+#define SNC_VALIDATE_OUT 1
+
+struct sony_acpi_value {
+ char *name; /* name of the entry */
+ char **acpiget; /* names of the ACPI get function */
+ char **acpiset; /* names of the ACPI set function */
+ int (*validate)(const int, const int); /* input/output validation */
+ int value; /* current setting */
+ int valid; /* Has ever been set */
+ int debug; /* active only in debug mode ? */
+ struct device_attribute devattr; /* sysfs atribute */
+};
+
+#define HANDLE_NAMES(_name, _values...) \
+ static char *snc_##_name[] = { _values, NULL }
+
+#define SONY_ACPI_VALUE(_name, _getters, _setters, _validate, _debug) \
+ { \
+ .name = __stringify(_name), \
+ .acpiget = _getters, \
+ .acpiset = _setters, \
+ .validate = _validate, \
+ .debug = _debug, \
+ .devattr = __ATTR(_name, 0, sony_acpi_show, sony_acpi_store), \
+ }
+
+#define SONY_ACPI_VALUE_NULL { .name = NULL }
+
+HANDLE_NAMES(fnkey_get, "GHKE");
+
+HANDLE_NAMES(brightness_def_get, "GPBR");
+HANDLE_NAMES(brightness_def_set, "SPBR");
+
+HANDLE_NAMES(cdpower_get, "GCDP");
+HANDLE_NAMES(cdpower_set, "SCDP", "CDPW");
+
+HANDLE_NAMES(audiopower_get, "GAZP");
+HANDLE_NAMES(audiopower_set, "AZPW");
+
+HANDLE_NAMES(lanpower_get, "GLNP");
+HANDLE_NAMES(lanpower_set, "LNPW");
+
+HANDLE_NAMES(PID_get, "GPID");
+
+HANDLE_NAMES(CTR_get, "GCTR");
+HANDLE_NAMES(CTR_set, "SCTR");
+
+HANDLE_NAMES(PCR_get, "GPCR");
+HANDLE_NAMES(PCR_set, "SPCR");
+
+HANDLE_NAMES(CMI_get, "GCMI");
+HANDLE_NAMES(CMI_set, "SCMI");
+
+static struct sony_acpi_value sony_acpi_values[] = {
+ SONY_ACPI_VALUE(brightness_default, snc_brightness_def_get,
+ snc_brightness_def_set, brightness_default_validate, 0),
+ SONY_ACPI_VALUE(fnkey, snc_fnkey_get, NULL, NULL, 0),
+ SONY_ACPI_VALUE(cdpower, snc_cdpower_get, snc_cdpower_set, boolean_validate, 0),
+ SONY_ACPI_VALUE(audiopower, snc_audiopower_get, snc_audiopower_set,
+ boolean_validate, 0),
+ SONY_ACPI_VALUE(lanpower, snc_lanpower_get, snc_lanpower_set,
+ boolean_validate, 1),
+ /* unknown methods */
+ SONY_ACPI_VALUE(PID, snc_PID_get, NULL, NULL, 1),
+ SONY_ACPI_VALUE(CTR, snc_CTR_get, snc_CTR_set, NULL, 1),
+ SONY_ACPI_VALUE(PCR, snc_PCR_get, snc_PCR_set, NULL, 1),
+ SONY_ACPI_VALUE(CMI, snc_CMI_get, snc_CMI_set, NULL, 1),
+ SONY_ACPI_VALUE_NULL
+};
+
+static acpi_handle sony_acpi_handle;
+static struct acpi_device *sony_acpi_acpi_device = NULL;
+
+/*
+ * acpi_evaluate_object wrappers
+ */
+static int acpi_callgetfunc(acpi_handle handle, char *name, int *result)
+{
+ struct acpi_buffer output;
+ union acpi_object out_obj;
+ acpi_status status;
+
+ output.length = sizeof(out_obj);
+ output.pointer = &out_obj;
+
+ status = acpi_evaluate_object(handle, name, NULL, &output);
+ if ((status == AE_OK) && (out_obj.type == ACPI_TYPE_INTEGER)) {
+ *result = out_obj.integer.value;
+ return 0;
+ }
+
+ printk(LOG_PFX "acpi_callreadfunc failed\n");
+
+ return -1;
+}
+
+static int acpi_callsetfunc(acpi_handle handle, char *name, int value,
+ int *result)
+{
+ struct acpi_object_list params;
+ union acpi_object in_obj;
+ struct acpi_buffer output;
+ union acpi_object out_obj;
+ acpi_status status;
+
+ params.count = 1;
+ params.pointer = &in_obj;
+ in_obj.type = ACPI_TYPE_INTEGER;
+ in_obj.integer.value = value;
+
+ output.length = sizeof(out_obj);
+ output.pointer = &out_obj;
+
+ status = acpi_evaluate_object(handle, name, ¶ms, &output);
+ if (status == AE_OK) {
+ if (result != NULL) {
+ if (out_obj.type != ACPI_TYPE_INTEGER) {
+ printk(LOG_PFX "acpi_evaluate_object bad "
+ "return type\n");
+ return -1;
+ }
+ *result = out_obj.integer.value;
+ }
+ return 0;
+ }
+
+ printk(LOG_PFX "acpi_evaluate_object failed\n");
+
+ return -1;
+}
+
+/*
+ * sony_acpi_values input/output validate functions
+ */
+
+/* brightness_default_validate:
+ *
+ * manipulate input output values to keep consistency with the
+ * backlight framework for which brightness values are 0-based.
+ */
+static int brightness_default_validate(const int direction, const int value)
+{
+ switch (direction) {
+ case SNC_VALIDATE_OUT:
+ return value - 1;
+ case SNC_VALIDATE_IN:
+ if (value >= 0 && value < SONY_MAX_BRIGHTNESS)
+ return value + 1;
+ }
+ return -EINVAL;
+}
+
+/* boolean_validate:
+ *
+ * on input validate boolean values 0/1, on output just pass the
+ * received value.
+ */
+static int boolean_validate(const int direction, const int value)
+{
+ if (direction == SNC_VALIDATE_IN) {
+ if (value != 0 && value != 1)
+ return -EINVAL;
+ }
+ return value;
+}
+
+/*
+ * Sysfs show/store common to all sony_acpi_values
+ */
+static ssize_t sony_acpi_show(struct device *dev, struct device_attribute *attr,
+ char *buffer)
+{
+ int value;
+ struct sony_acpi_value *item =
+ container_of(attr, struct sony_acpi_value, devattr);
+
+ if (!*item->acpiget)
+ return -EIO;
+
+ if (acpi_callgetfunc(sony_acpi_handle, *item->acpiget, &value) < 0)
+ return -EIO;
+
+ if (item->validate)
+ value = item->validate(SNC_VALIDATE_OUT, value);
+
+ return snprintf(buffer, PAGE_SIZE, "%d\n", value);
+}
+
+static ssize_t sony_acpi_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buffer, size_t count)
+{
+ int value;
+ struct sony_acpi_value *item =
+ container_of(attr, struct sony_acpi_value, devattr);
+
+ if (!item->acpiset)
+ return -EIO;
+
+ if (count > 31)
+ return -EINVAL;
+
+ value = simple_strtoul(buffer, NULL, 10);
+
+ if (item->validate)
+ value = item->validate(SNC_VALIDATE_IN, value);
+
+ if (value < 0)
+ return value;
+
+ if (acpi_callsetfunc(sony_acpi_handle, *item->acpiset, value, NULL) < 0)
+ return -EIO;
+ item->value = value;
+ item->valid = 1;
+ return count;
+}
+
+/*
+ * Platform device
+ */
+static struct platform_driver sncpf_driver = {
+ .driver = {
+ .name = "sony-laptop",
+ .owner = THIS_MODULE,
+ }
+};
+static struct platform_device *sncpf_device;
+
+static int sony_snc_pf_add(void)
+{
+ acpi_handle handle;
+ struct sony_acpi_value *item;
+ int ret = 0;
+
+ ret = platform_driver_register(&sncpf_driver);
+ if (ret)
+ goto out;
+
+ sncpf_device = platform_device_alloc("sony-laptop", -1);
+ if (!sncpf_device) {
+ ret = -ENOMEM;
+ goto out_platform_registered;
+ }
+
+ ret = platform_device_add(sncpf_device);
+ if (ret)
+ goto out_platform_alloced;
+
+ for (item = sony_acpi_values; item->name; ++item) {
+
+ if (!debug && item->debug)
+ continue;
+
+ /* find the available acpiget as described in the DSDT */
+ for (; item->acpiget && *item->acpiget; ++item->acpiget) {
+ if (ACPI_SUCCESS(acpi_get_handle(sony_acpi_handle,
+ *item->acpiget,
+ &handle))) {
+ if (debug)
+ printk(LOG_PFX "Found %s getter: %s\n",
+ item->name, *item->acpiget);
+ item->devattr.attr.mode |= S_IRUGO;
+ break;
+ }
+ }
+
+ /* find the available acpiset as described in the DSDT */
+ for (; item->acpiset && *item->acpiset; ++item->acpiset) {
+ if (ACPI_SUCCESS(acpi_get_handle(sony_acpi_handle,
+ *item->acpiset,
+ &handle))) {
+ if (debug)
+ printk(LOG_PFX "Found %s setter: %s\n",
+ item->name, *item->acpiset);
+ item->devattr.attr.mode |= S_IWUSR;
+ break;
+ }
+ }
+
+ if (item->devattr.attr.mode != 0) {
+ ret =
+ device_create_file(&sncpf_device->dev,
+ &item->devattr);
+ if (ret)
+ goto out_sysfs;
+ }
+ }
+
+ return 0;
+
+ out_sysfs:
+ for (item = sony_acpi_values; item->name; ++item) {
+ device_remove_file(&sncpf_device->dev, &item->devattr);
+ }
+ platform_device_del(sncpf_device);
+ out_platform_alloced:
+ platform_device_put(sncpf_device);
+ out_platform_registered:
+ platform_driver_unregister(&sncpf_driver);
+ out:
+ return ret;
+}
+
+static void sony_snc_pf_remove(void)
+{
+ struct sony_acpi_value *item;
+
+ for (item = sony_acpi_values; item->name; ++item) {
+ device_remove_file(&sncpf_device->dev, &item->devattr);
+ }
+
+ platform_device_del(sncpf_device);
+ platform_device_put(sncpf_device);
+ platform_driver_unregister(&sncpf_driver);
+}
+
+/*
+ * Backlight device
+ */
+static int sony_backlight_update_status(struct backlight_device *bd)
+{
+ return acpi_callsetfunc(sony_acpi_handle, "SBRT",
+ bd->props->brightness + 1, NULL);
+}
+
+static int sony_backlight_get_brightness(struct backlight_device *bd)
+{
+ int value;
+
+ if (acpi_callgetfunc(sony_acpi_handle, "GBRT", &value))
+ return 0;
+ /* brightness levels are 1-based, while backlight ones are 0-based */
+ return value - 1;
+}
+
+static struct backlight_device *sony_backlight_device;
+static struct backlight_properties sony_backlight_properties = {
+ .owner = THIS_MODULE,
+ .update_status = sony_backlight_update_status,
+ .get_brightness = sony_backlight_get_brightness,
+ .max_brightness = SONY_MAX_BRIGHTNESS - 1,
+};
+
+/*
+ * ACPI callbacks
+ */
+static void sony_acpi_notify(acpi_handle handle, u32 event, void *data)
+{
+ if (debug)
+ printk(LOG_PFX "sony_acpi_notify, event: %d\n", event);
+ acpi_bus_generate_event(sony_acpi_acpi_device, 1, event);
+}
+
+static acpi_status sony_walk_callback(acpi_handle handle, u32 level,
+ void *context, void **return_value)
+{
+ struct acpi_namespace_node *node;
+ union acpi_operand_object *operand;
+
+ node = (struct acpi_namespace_node *)handle;
+ operand = (union acpi_operand_object *)node->object;
+
+ printk(LOG_PFX "method: name: %4.4s, args %X\n", node->name.ascii,
+ (u32) operand->method.param_count);
+
+ return AE_OK;
+}
+
+/*
+ * ACPI device
+ */
+static int sony_acpi_resume(struct acpi_device *device)
+{
+ struct sony_acpi_value *item;
+
+ for (item = sony_acpi_values; item->name; item++) {
+ int ret;
+
+ if (!item->valid)
+ continue;
+ ret = acpi_callsetfunc(sony_acpi_handle, *item->acpiset,
+ item->value, NULL);
+ if (ret < 0) {
+ printk("%s: %d\n", __FUNCTION__, ret);
+ break;
+ }
+ }
+ return 0;
+}
+
+static int sony_acpi_add(struct acpi_device *device)
+{
+ acpi_status status;
+ int result;
+ acpi_handle handle;
+
+ sony_acpi_acpi_device = device;
+
+ sony_acpi_handle = device->handle;
+
+ if (debug) {
+ status = acpi_walk_namespace(ACPI_TYPE_METHOD, sony_acpi_handle,
+ 1, sony_walk_callback, NULL, NULL);
+ if (ACPI_FAILURE(status)) {
+ printk(LOG_PFX "unable to walk acpi resources\n");
+ result = -ENODEV;
+ goto outwalk;
+ }
+ }
+
+ status = acpi_install_notify_handler(sony_acpi_handle,
+ ACPI_DEVICE_NOTIFY,
+ sony_acpi_notify, NULL);
+ if (ACPI_FAILURE(status)) {
+ printk(LOG_PFX "unable to install notify handler\n");
+ result = -ENODEV;
+ goto outwalk;
+ }
+
+ if (ACPI_SUCCESS(acpi_get_handle(sony_acpi_handle, "GBRT", &handle))) {
+ sony_backlight_device = backlight_device_register("sony", NULL,
+ NULL,
+ &sony_backlight_properties);
+
+ if (IS_ERR(sony_backlight_device)) {
+ printk(LOG_PFX "unable to register backlight device\n");
+ sony_backlight_device = NULL;
+ } else
+ sony_backlight_properties.brightness =
+ sony_backlight_get_brightness
+ (sony_backlight_device);
+ }
+
+ if (sony_snc_pf_add())
+ goto outbacklight;
+
+ printk(KERN_INFO ACPI_SNC_DRIVER_NAME " successfully installed\n");
+
+ return 0;
+
+ outbacklight:
+ if (sony_backlight_device)
+ backlight_device_unregister(sony_backlight_device);
+
+ status = acpi_remove_notify_handler(sony_acpi_handle,
+ ACPI_DEVICE_NOTIFY,
+ sony_acpi_notify);
+ if (ACPI_FAILURE(status))
+ printk(LOG_PFX "unable to remove notify handler\n");
+ outwalk:
+ return result;
+}
+
+static int sony_acpi_remove(struct acpi_device *device, int type)
+{
+ acpi_status status;
+
+ if (sony_backlight_device)
+ backlight_device_unregister(sony_backlight_device);
+
+ sony_acpi_acpi_device = NULL;
+
+ status = acpi_remove_notify_handler(sony_acpi_handle,
+ ACPI_DEVICE_NOTIFY,
+ sony_acpi_notify);
+ if (ACPI_FAILURE(status))
+ printk(LOG_PFX "unable to remove notify handler\n");
+
+ sony_snc_pf_remove();
+
+ printk(KERN_INFO ACPI_SNC_DRIVER_NAME " successfully removed\n");
+
+ return 0;
+}
+
+static struct acpi_driver sony_acpi_driver = {
+ .name = ACPI_SNC_DRIVER_NAME,
+ .class = ACPI_SNC_CLASS,
+ .ids = ACPI_SNC_HID,
+ .ops = {
+ .add = sony_acpi_add,
+ .remove = sony_acpi_remove,
+ .resume = sony_acpi_resume,
+ },
+};
+
+static int __init sony_acpi_init(void)
+{
+ return acpi_bus_register_driver(&sony_acpi_driver);
+}
+
+static void __exit sony_acpi_exit(void)
+{
+ acpi_bus_unregister_driver(&sony_acpi_driver);
+}
+
+module_init(sony_acpi_init);
+module_exit(sony_acpi_exit);
diff --git a/drivers/mmc/at91_mci.c b/drivers/mmc/at91_mci.c
index 2ce50f3..459f4b4 100644
--- a/drivers/mmc/at91_mci.c
+++ b/drivers/mmc/at91_mci.c
@@ -64,6 +64,7 @@
#include <linux/err.h>
#include <linux/dma-mapping.h>
#include <linux/clk.h>
+#include <linux/atmel_pdc.h>
#include <linux/mmc/host.h>
#include <linux/mmc/protocol.h>
@@ -75,7 +76,6 @@
#include <asm/arch/cpu.h>
#include <asm/arch/gpio.h>
#include <asm/arch/at91_mci.h>
-#include <asm/arch/at91_pdc.h>
#define DRIVER_NAME "at91_mci"
@@ -211,13 +211,13 @@
/* Check to see if this needs filling */
if (i == 0) {
- if (at91_mci_read(host, AT91_PDC_RCR) != 0) {
+ if (at91_mci_read(host, ATMEL_PDC_RCR) != 0) {
pr_debug("Transfer active in current\n");
continue;
}
}
else {
- if (at91_mci_read(host, AT91_PDC_RNCR) != 0) {
+ if (at91_mci_read(host, ATMEL_PDC_RNCR) != 0) {
pr_debug("Transfer active in next\n");
continue;
}
@@ -234,12 +234,12 @@
pr_debug("dma address = %08X, length = %d\n", sg->dma_address, sg->length);
if (i == 0) {
- at91_mci_write(host, AT91_PDC_RPR, sg->dma_address);
- at91_mci_write(host, AT91_PDC_RCR, sg->length / 4);
+ at91_mci_write(host, ATMEL_PDC_RPR, sg->dma_address);
+ at91_mci_write(host, ATMEL_PDC_RCR, sg->length / 4);
}
else {
- at91_mci_write(host, AT91_PDC_RNPR, sg->dma_address);
- at91_mci_write(host, AT91_PDC_RNCR, sg->length / 4);
+ at91_mci_write(host, ATMEL_PDC_RNPR, sg->dma_address);
+ at91_mci_write(host, ATMEL_PDC_RNCR, sg->length / 4);
}
}
@@ -303,7 +303,7 @@
at91mci_pre_dma_read(host);
else {
at91_mci_write(host, AT91_MCI_IER, AT91_MCI_RXBUFF);
- at91_mci_write(host, AT91_PDC_PTCR, AT91_PDC_RXTDIS | AT91_PDC_TXTDIS);
+ at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS);
}
pr_debug("post dma read done\n");
@@ -320,7 +320,7 @@
pr_debug("Handling the transmit\n");
/* Disable the transfer */
- at91_mci_write(host, AT91_PDC_PTCR, AT91_PDC_RXTDIS | AT91_PDC_TXTDIS);
+ at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS);
/* Now wait for cmd ready */
at91_mci_write(host, AT91_MCI_IDR, AT91_MCI_TXBUFE);
@@ -431,15 +431,15 @@
cmd->opcode, cmdr, cmd->arg, blocks, block_length, at91_mci_read(host, AT91_MCI_MR));
if (!data) {
- at91_mci_write(host, AT91_PDC_PTCR, AT91_PDC_TXTDIS | AT91_PDC_RXTDIS);
- at91_mci_write(host, AT91_PDC_RPR, 0);
- at91_mci_write(host, AT91_PDC_RCR, 0);
- at91_mci_write(host, AT91_PDC_RNPR, 0);
- at91_mci_write(host, AT91_PDC_RNCR, 0);
- at91_mci_write(host, AT91_PDC_TPR, 0);
- at91_mci_write(host, AT91_PDC_TCR, 0);
- at91_mci_write(host, AT91_PDC_TNPR, 0);
- at91_mci_write(host, AT91_PDC_TNCR, 0);
+ at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_TXTDIS | ATMEL_PDC_RXTDIS);
+ at91_mci_write(host, ATMEL_PDC_RPR, 0);
+ at91_mci_write(host, ATMEL_PDC_RCR, 0);
+ at91_mci_write(host, ATMEL_PDC_RNPR, 0);
+ at91_mci_write(host, ATMEL_PDC_RNCR, 0);
+ at91_mci_write(host, ATMEL_PDC_TPR, 0);
+ at91_mci_write(host, ATMEL_PDC_TCR, 0);
+ at91_mci_write(host, ATMEL_PDC_TNPR, 0);
+ at91_mci_write(host, ATMEL_PDC_TNCR, 0);
at91_mci_write(host, AT91_MCI_ARGR, cmd->arg);
at91_mci_write(host, AT91_MCI_CMDR, cmdr);
@@ -452,7 +452,7 @@
/*
* Disable the PDC controller
*/
- at91_mci_write(host, AT91_PDC_PTCR, AT91_PDC_RXTDIS | AT91_PDC_TXTDIS);
+ at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS);
if (cmdr & AT91_MCI_TRCMD_START) {
data->bytes_xfered = 0;
@@ -481,8 +481,8 @@
pr_debug("Transmitting %d bytes\n", host->total_length);
- at91_mci_write(host, AT91_PDC_TPR, host->physical_address);
- at91_mci_write(host, AT91_PDC_TCR, host->total_length / 4);
+ at91_mci_write(host, ATMEL_PDC_TPR, host->physical_address);
+ at91_mci_write(host, ATMEL_PDC_TCR, host->total_length / 4);
ier = AT91_MCI_TXBUFE;
}
}
@@ -497,9 +497,9 @@
if (cmdr & AT91_MCI_TRCMD_START) {
if (cmdr & AT91_MCI_TRDIR)
- at91_mci_write(host, AT91_PDC_PTCR, AT91_PDC_RXTEN);
+ at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTEN);
else
- at91_mci_write(host, AT91_PDC_PTCR, AT91_PDC_TXTEN);
+ at91_mci_write(host, ATMEL_PDC_PTCR, ATMEL_PDC_TXTEN);
}
return ier;
}
diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index 4438ae1..a3c1755 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -415,6 +415,7 @@
* __pci_register_driver - register a new pci driver
* @drv: the driver structure to register
* @owner: owner module of drv
+ * @mod_name: module name string
*
* Adds the driver structure to the list of registered drivers.
* Returns a negative value on error, otherwise 0.
diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
index 7a94076..cd913a2 100644
--- a/drivers/pci/pci-sysfs.c
+++ b/drivers/pci/pci-sysfs.c
@@ -143,6 +143,14 @@
return sprintf (buf, "%u\n", atomic_read(&pdev->enable_cnt));
}
+#ifdef CONFIG_NUMA
+static ssize_t
+numa_node_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ return sprintf (buf, "%d\n", dev->numa_node);
+}
+#endif
+
static ssize_t
msi_bus_show(struct device *dev, struct device_attribute *attr, char *buf)
{
@@ -194,6 +202,9 @@
__ATTR_RO(irq),
__ATTR_RO(local_cpus),
__ATTR_RO(modalias),
+#ifdef CONFIG_NUMA
+ __ATTR_RO(numa_node),
+#endif
__ATTR(enable, 0600, is_enabled_show, is_enabled_store),
__ATTR(broken_parity_status,(S_IRUGO|S_IWUSR),
broken_parity_status_show,broken_parity_status_store),
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 8b44cff..1e74e1e 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -21,6 +21,12 @@
unsigned int pci_pm_d3_delay = 10;
+#define DEFAULT_CARDBUS_IO_SIZE (256)
+#define DEFAULT_CARDBUS_MEM_SIZE (64*1024*1024)
+/* pci=cbmemsize=nnM,cbiosize=nn can override this */
+unsigned long pci_cardbus_io_size = DEFAULT_CARDBUS_IO_SIZE;
+unsigned long pci_cardbus_mem_size = DEFAULT_CARDBUS_MEM_SIZE;
+
/**
* pci_bus_max_busnr - returns maximum PCI bus number of given bus' children
* @bus: pointer to PCI bus structure to search
@@ -1300,7 +1306,7 @@
/**
* pci_select_bars - Make BAR mask from the type of resource
- * @pdev: the PCI device for which BAR mask is made
+ * @dev: the PCI device for which BAR mask is made
* @flags: resource type mask to be selected
*
* This helper routine makes bar mask from the type of resource.
@@ -1333,6 +1339,10 @@
if (*str && (str = pcibios_setup(str)) && *str) {
if (!strcmp(str, "nomsi")) {
pci_no_msi();
+ } else if (!strncmp(str, "cbiosize=", 9)) {
+ pci_cardbus_io_size = memparse(str + 9, &str);
+ } else if (!strncmp(str, "cbmemsize=", 10)) {
+ pci_cardbus_mem_size = memparse(str + 10, &str);
} else {
printk(KERN_ERR "PCI: Unknown option `%s'\n",
str);
diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
index 89f3036..3554f39 100644
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -36,13 +36,6 @@
#define ROUND_UP(x, a) (((x) + (a) - 1) & ~((a) - 1))
-/*
- * FIXME: IO should be max 256 bytes. However, since we may
- * have a P2P bridge below a cardbus bridge, we need 4K.
- */
-#define CARDBUS_IO_SIZE (256)
-#define CARDBUS_MEM_SIZE (64*1024*1024)
-
static void __devinit
pbus_assign_resources_sorted(struct pci_bus *bus)
{
@@ -415,12 +408,12 @@
* Reserve some resources for CardBus. We reserve
* a fixed amount of bus space for CardBus bridges.
*/
- b_res[0].start = CARDBUS_IO_SIZE;
- b_res[0].end = b_res[0].start + CARDBUS_IO_SIZE - 1;
+ b_res[0].start = pci_cardbus_io_size;
+ b_res[0].end = b_res[0].start + pci_cardbus_io_size - 1;
b_res[0].flags |= IORESOURCE_IO;
- b_res[1].start = CARDBUS_IO_SIZE;
- b_res[1].end = b_res[1].start + CARDBUS_IO_SIZE - 1;
+ b_res[1].start = pci_cardbus_io_size;
+ b_res[1].end = b_res[1].start + pci_cardbus_io_size - 1;
b_res[1].flags |= IORESOURCE_IO;
/*
@@ -440,16 +433,16 @@
* twice the size.
*/
if (ctrl & PCI_CB_BRIDGE_CTL_PREFETCH_MEM0) {
- b_res[2].start = CARDBUS_MEM_SIZE;
- b_res[2].end = b_res[2].start + CARDBUS_MEM_SIZE - 1;
+ b_res[2].start = pci_cardbus_mem_size;
+ b_res[2].end = b_res[2].start + pci_cardbus_mem_size - 1;
b_res[2].flags |= IORESOURCE_MEM | IORESOURCE_PREFETCH;
- b_res[3].start = CARDBUS_MEM_SIZE;
- b_res[3].end = b_res[3].start + CARDBUS_MEM_SIZE - 1;
+ b_res[3].start = pci_cardbus_mem_size;
+ b_res[3].end = b_res[3].start + pci_cardbus_mem_size - 1;
b_res[3].flags |= IORESOURCE_MEM;
} else {
- b_res[3].start = CARDBUS_MEM_SIZE * 2;
- b_res[3].end = b_res[3].start + CARDBUS_MEM_SIZE * 2 - 1;
+ b_res[3].start = pci_cardbus_mem_size * 2;
+ b_res[3].end = b_res[3].start + pci_cardbus_mem_size * 2 - 1;
b_res[3].flags |= IORESOURCE_MEM;
}
}
diff --git a/drivers/pci/setup-irq.c b/drivers/pci/setup-irq.c
index a251289..568f187 100644
--- a/drivers/pci/setup-irq.c
+++ b/drivers/pci/setup-irq.c
@@ -24,7 +24,7 @@
int (*map_irq)(struct pci_dev *, u8, u8))
{
u8 pin, slot;
- int irq;
+ int irq = 0;
/* If this device is not on the primary bus, we need to figure out
which interrupt pin it will come in on. We know which slot it
@@ -33,16 +33,18 @@
apply the swizzle function. */
pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
- /* Cope with 0 and illegal. */
- if (pin == 0 || pin > 4)
+ /* Cope with illegal. */
+ if (pin > 4)
pin = 1;
- /* Follow the chain of bridges, swizzling as we go. */
- slot = (*swizzle)(dev, &pin);
+ if (pin != 0) {
+ /* Follow the chain of bridges, swizzling as we go. */
+ slot = (*swizzle)(dev, &pin);
- irq = (*map_irq)(dev, slot, pin);
- if (irq == -1)
- irq = 0;
+ irq = (*map_irq)(dev, slot, pin);
+ if (irq == -1)
+ irq = 0;
+ }
dev->irq = irq;
pr_debug("PCI: fixup irq: (%s) got %d\n",
diff --git a/drivers/pcmcia/at91_cf.c b/drivers/pcmcia/at91_cf.c
index b318628..99baabc 100644
--- a/drivers/pcmcia/at91_cf.c
+++ b/drivers/pcmcia/at91_cf.c
@@ -277,7 +277,7 @@
board->det_pin, board->irq_pin);
cf->socket.owner = THIS_MODULE;
- cf->socket.dev.dev = &pdev->dev;
+ cf->socket.dev.parent = &pdev->dev;
cf->socket.ops = &at91_cf_ops;
cf->socket.resource_ops = &pccard_static_ops;
cf->socket.features = SS_CAP_PCCARD | SS_CAP_STATIC_MAP
diff --git a/drivers/pcmcia/soc_common.c b/drivers/pcmcia/soc_common.c
index d2a3bea..aa7779d 100644
--- a/drivers/pcmcia/soc_common.c
+++ b/drivers/pcmcia/soc_common.c
@@ -478,7 +478,7 @@
*
* Returns: the number of characters added to the buffer
*/
-static ssize_t show_status(struct device *dev, char *buf)
+static ssize_t show_status(struct device *dev, struct device_attribute *attr, char *buf)
{
struct soc_pcmcia_socket *skt =
container_of(dev, struct soc_pcmcia_socket, socket.dev);
@@ -501,7 +501,7 @@
return p-buf;
}
-static CLASS_DEVICE_ATTR(status, S_IRUGO, show_status, NULL);
+static DEVICE_ATTR(status, S_IRUGO, show_status, NULL);
static struct pccard_operations soc_common_pcmcia_operations = {
@@ -660,7 +660,7 @@
skt->socket.ops = &soc_common_pcmcia_operations;
skt->socket.owner = ops->owner;
- skt->socket.dev.dev = dev;
+ skt->socket.dev.parent = dev;
init_timer(&skt->poll_timer);
skt->poll_timer.function = soc_common_pcmcia_poll_event;
@@ -747,7 +747,7 @@
add_timer(&skt->poll_timer);
- device_create_file(&skt->socket.dev, &device_attr_status);
+ device_create_file(&skt->socket.dev, &dev_attr_status);
}
dev_set_drvdata(dev, sinfo);
diff --git a/drivers/pnp/pnpacpi/Kconfig b/drivers/pnp/pnpacpi/Kconfig
index ad27e5e..b04767c 100644
--- a/drivers/pnp/pnpacpi/Kconfig
+++ b/drivers/pnp/pnpacpi/Kconfig
@@ -2,17 +2,5 @@
# Plug and Play ACPI configuration
#
config PNPACPI
- bool "Plug and Play ACPI support"
- depends on PNP && ACPI
- default y
- ---help---
- Linux uses the PNPACPI to autodetect built-in
- mainboard resources (e.g. parallel port resources).
-
- Some features (e.g. real hotplug) are not currently
- implemented.
-
- If you would like the kernel to detect and allocate resources to
- your mainboard devices (on some systems they are disabled by the
- BIOS) say Y here. Also the PNPACPI can help prevent resource
- conflicts between mainboard devices and other bus devices.
+ bool
+ default (PNP && ACPI)
diff --git a/drivers/ps3/Makefile b/drivers/ps3/Makefile
index 96958c0..e251d1c 100644
--- a/drivers/ps3/Makefile
+++ b/drivers/ps3/Makefile
@@ -1,2 +1,3 @@
obj-$(CONFIG_PS3_VUART) += vuart.o
obj-$(CONFIG_PS3_PS3AV) += ps3av.o ps3av_cmd.o
+obj-$(CONFIG_PS3_SYS_MANAGER) += sys-manager.o
diff --git a/drivers/ps3/sys-manager.c b/drivers/ps3/sys-manager.c
new file mode 100644
index 0000000..0fc30be
--- /dev/null
+++ b/drivers/ps3/sys-manager.c
@@ -0,0 +1,604 @@
+/*
+ * PS3 System Manager.
+ *
+ * Copyright (C) 2007 Sony Computer Entertainment Inc.
+ * Copyright 2007 Sony Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/workqueue.h>
+#include <linux/reboot.h>
+#include <asm/ps3.h>
+#include "vuart.h"
+
+MODULE_AUTHOR("Sony Corporation");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("PS3 System Manager");
+
+/**
+ * ps3_sys_manager - PS3 system manager driver.
+ *
+ * The system manager provides an asyncronous system event notification
+ * mechanism for reporting events like thermal alert and button presses to
+ * guests. It also provides support to control system shutdown and startup.
+ *
+ * The actual system manager is implemented as an application running in the
+ * system policy module in lpar_1. Guests communicate with the system manager
+ * through port 2 of the vuart using a simple packet message protocol.
+ * Messages are comprised of a fixed field header followed by a message
+ * specific payload.
+ */
+
+/**
+ * struct ps3_sys_manager_header - System manager message header.
+ * @version: Header version, currently 1.
+ * @size: Header size in bytes, curently 16.
+ * @payload_size: Message payload size in bytes.
+ * @service_id: Message type, one of enum ps3_sys_manager_service_id.
+ */
+
+struct ps3_sys_manager_header {
+ /* version 1 */
+ u8 version;
+ u8 size;
+ u16 reserved_1;
+ u32 payload_size;
+ u16 service_id;
+ u16 reserved_2[3];
+};
+
+/**
+ * @PS3_SM_RX_MSG_LEN - System manager received message length.
+ *
+ * Currently all messages received from the system manager are the same length
+ * (16 bytes header + 16 bytes payload = 32 bytes). This knowlege is used to
+ * simplify the logic.
+ */
+
+enum {
+ PS3_SM_RX_MSG_LEN = 32,
+};
+
+/**
+ * enum ps3_sys_manager_service_id - Message header service_id.
+ * @PS3_SM_SERVICE_ID_REQUEST: guest --> sys_manager.
+ * @PS3_SM_SERVICE_ID_COMMAND: guest <-- sys_manager.
+ * @PS3_SM_SERVICE_ID_RESPONSE: guest --> sys_manager.
+ * @PS3_SM_SERVICE_ID_SET_ATTR: guest --> sys_manager.
+ * @PS3_SM_SERVICE_ID_EXTERN_EVENT: guest <-- sys_manager.
+ * @PS3_SM_SERVICE_ID_SET_NEXT_OP: guest --> sys_manager.
+ */
+
+enum ps3_sys_manager_service_id {
+ /* version 1 */
+ PS3_SM_SERVICE_ID_REQUEST = 1,
+ PS3_SM_SERVICE_ID_RESPONSE = 2,
+ PS3_SM_SERVICE_ID_COMMAND = 3,
+ PS3_SM_SERVICE_ID_EXTERN_EVENT = 4,
+ PS3_SM_SERVICE_ID_SET_NEXT_OP = 5,
+ PS3_SM_SERVICE_ID_SET_ATTR = 8,
+};
+
+/**
+ * enum ps3_sys_manager_attr - Notification attribute (bit position mask).
+ * @PS3_SM_ATTR_POWER: Power button.
+ * @PS3_SM_ATTR_RESET: Reset button, not available on retail console.
+ * @PS3_SM_ATTR_THERMAL: Sytem thermal alert.
+ * @PS3_SM_ATTR_CONTROLLER: Remote controller event.
+ * @PS3_SM_ATTR_ALL: Logical OR of all.
+ *
+ * The guest tells the system manager which events it is interested in receiving
+ * notice of by sending the system manager a logical OR of notification
+ * attributes via the ps3_sys_manager_send_attr() routine.
+ */
+
+enum ps3_sys_manager_attr {
+ /* version 1 */
+ PS3_SM_ATTR_POWER = 1,
+ PS3_SM_ATTR_RESET = 2,
+ PS3_SM_ATTR_THERMAL = 4,
+ PS3_SM_ATTR_CONTROLLER = 8, /* bogus? */
+ PS3_SM_ATTR_ALL = 0x0f,
+};
+
+/**
+ * enum ps3_sys_manager_event - External event type, reported by system manager.
+ * @PS3_SM_EVENT_POWER_PRESSED: payload.value not used.
+ * @PS3_SM_EVENT_POWER_RELEASED: payload.value = time pressed in millisec.
+ * @PS3_SM_EVENT_RESET_PRESSED: payload.value not used.
+ * @PS3_SM_EVENT_RESET_RELEASED: payload.value = time pressed in millisec.
+ * @PS3_SM_EVENT_THERMAL_ALERT: payload.value = thermal zone id.
+ * @PS3_SM_EVENT_THERMAL_CLEARED: payload.value = thermal zone id.
+ */
+
+enum ps3_sys_manager_event {
+ /* version 1 */
+ PS3_SM_EVENT_POWER_PRESSED = 3,
+ PS3_SM_EVENT_POWER_RELEASED = 4,
+ PS3_SM_EVENT_RESET_PRESSED = 5,
+ PS3_SM_EVENT_RESET_RELEASED = 6,
+ PS3_SM_EVENT_THERMAL_ALERT = 7,
+ PS3_SM_EVENT_THERMAL_CLEARED = 8,
+ /* no info on controller events */
+};
+
+/**
+ * enum ps3_sys_manager_next_op - Operation to perform after lpar is destroyed.
+ */
+
+enum ps3_sys_manager_next_op {
+ /* version 3 */
+ PS3_SM_NEXT_OP_SYS_SHUTDOWN = 1,
+ PS3_SM_NEXT_OP_SYS_REBOOT = 2,
+ PS3_SM_NEXT_OP_LPAR_REBOOT = 0x82,
+};
+
+/**
+ * enum ps3_sys_manager_wake_source - Next-op wakeup source (bit position mask).
+ * @PS3_SM_WAKE_DEFAULT: Disk insert, power button, eject button, IR
+ * controller, and bluetooth controller.
+ * @PS3_SM_WAKE_RTC:
+ * @PS3_SM_WAKE_RTC_ERROR:
+ * @PS3_SM_WAKE_P_O_R: Power on reset.
+ *
+ * Additional wakeup sources when specifying PS3_SM_NEXT_OP_SYS_SHUTDOWN.
+ * System will always wake from the PS3_SM_WAKE_DEFAULT sources.
+ */
+
+enum ps3_sys_manager_wake_source {
+ /* version 3 */
+ PS3_SM_WAKE_DEFAULT = 0,
+ PS3_SM_WAKE_RTC = 0x00000040,
+ PS3_SM_WAKE_RTC_ERROR = 0x00000080,
+ PS3_SM_WAKE_P_O_R = 0x10000000,
+};
+
+/**
+ * enum ps3_sys_manager_cmd - Command from system manager to guest.
+ *
+ * The guest completes the actions needed, then acks or naks the command via
+ * ps3_sys_manager_send_response(). In the case of @PS3_SM_CMD_SHUTDOWN,
+ * the guest must be fully prepared for a system poweroff prior to acking the
+ * command.
+ */
+
+enum ps3_sys_manager_cmd {
+ /* version 1 */
+ PS3_SM_CMD_SHUTDOWN = 1, /* shutdown guest OS */
+};
+
+/**
+ * ps3_sys_manager_write - Helper to write a two part message to the vuart.
+ *
+ */
+
+static int ps3_sys_manager_write(struct ps3_vuart_port_device *dev,
+ const struct ps3_sys_manager_header *header, const void *payload)
+{
+ int result;
+
+ BUG_ON(header->version != 1);
+ BUG_ON(header->size != 16);
+ BUG_ON(header->payload_size != 8 && header->payload_size != 16);
+ BUG_ON(header->service_id > 8);
+
+ result = ps3_vuart_write(dev, header,
+ sizeof(struct ps3_sys_manager_header));
+
+ if (!result)
+ result = ps3_vuart_write(dev, payload, header->payload_size);
+
+ return result;
+}
+
+/**
+ * ps3_sys_manager_send_attr - Send a 'set attribute' to the system manager.
+ *
+ */
+
+static int ps3_sys_manager_send_attr(struct ps3_vuart_port_device *dev,
+ enum ps3_sys_manager_attr attr)
+{
+ static const struct ps3_sys_manager_header header = {
+ .version = 1,
+ .size = 16,
+ .payload_size = 16,
+ .service_id = PS3_SM_SERVICE_ID_SET_ATTR,
+ };
+ struct {
+ u8 version;
+ u8 reserved_1[3];
+ u32 attribute;
+ } payload;
+
+ BUILD_BUG_ON(sizeof(payload) != 8);
+
+ dev_dbg(&dev->core, "%s:%d: %xh\n", __func__, __LINE__, attr);
+
+ memset(&payload, 0, sizeof(payload));
+ payload.version = 1;
+ payload.attribute = attr;
+
+ return ps3_sys_manager_write(dev, &header, &payload);
+}
+
+/**
+ * ps3_sys_manager_send_next_op - Send a 'set next op' to the system manager.
+ *
+ * Tell the system manager what to do after this lpar is destroyed.
+ */
+
+static int ps3_sys_manager_send_next_op(struct ps3_vuart_port_device *dev,
+ enum ps3_sys_manager_next_op op,
+ enum ps3_sys_manager_wake_source wake_source)
+{
+ static const struct ps3_sys_manager_header header = {
+ .version = 1,
+ .size = 16,
+ .payload_size = 16,
+ .service_id = PS3_SM_SERVICE_ID_SET_NEXT_OP,
+ };
+ struct {
+ u8 version;
+ u8 type;
+ u8 gos_id;
+ u8 reserved_1;
+ u32 wake_source;
+ u8 reserved_2[8];
+ } payload;
+
+ BUILD_BUG_ON(sizeof(payload) != 16);
+
+ dev_dbg(&dev->core, "%s:%d: (%xh)\n", __func__, __LINE__, op);
+
+ memset(&payload, 0, sizeof(payload));
+ payload.version = 3;
+ payload.type = op;
+ payload.gos_id = 3; /* other os */
+ payload.wake_source = wake_source;
+
+ return ps3_sys_manager_write(dev, &header, &payload);
+}
+
+/**
+ * ps3_sys_manager_send_request_shutdown - Send 'request' to the system manager.
+ *
+ * The guest sends this message to request an operation or action of the system
+ * manager. The reply is a command message from the system manager. In the
+ * command handler the guest performs the requested operation. The result of
+ * the command is then communicated back to the system manager with a response
+ * message.
+ *
+ * Currently, the only supported request it the 'shutdown self' request.
+ */
+
+static int ps3_sys_manager_send_request_shutdown(struct ps3_vuart_port_device *dev)
+{
+ static const struct ps3_sys_manager_header header = {
+ .version = 1,
+ .size = 16,
+ .payload_size = 16,
+ .service_id = PS3_SM_SERVICE_ID_REQUEST,
+ };
+ struct {
+ u8 version;
+ u8 type;
+ u8 gos_id;
+ u8 reserved_1[13];
+ } static const payload = {
+ .version = 1,
+ .type = 1, /* shutdown */
+ .gos_id = 0, /* self */
+ };
+
+ BUILD_BUG_ON(sizeof(payload) != 16);
+
+ dev_dbg(&dev->core, "%s:%d\n", __func__, __LINE__);
+
+ return ps3_sys_manager_write(dev, &header, &payload);
+}
+
+/**
+ * ps3_sys_manager_send_response - Send a 'response' to the system manager.
+ * @status: zero = success, others fail.
+ *
+ * The guest sends this message to the system manager to acnowledge success or
+ * failure of a command sent by the system manager.
+ */
+
+static int ps3_sys_manager_send_response(struct ps3_vuart_port_device *dev,
+ u64 status)
+{
+ static const struct ps3_sys_manager_header header = {
+ .version = 1,
+ .size = 16,
+ .payload_size = 16,
+ .service_id = PS3_SM_SERVICE_ID_RESPONSE,
+ };
+ struct {
+ u8 version;
+ u8 reserved_1[3];
+ u8 status;
+ u8 reserved_2[11];
+ } payload;
+
+ BUILD_BUG_ON(sizeof(payload) != 16);
+
+ dev_dbg(&dev->core, "%s:%d: (%s)\n", __func__, __LINE__,
+ (status ? "nak" : "ack"));
+
+ memset(&payload, 0, sizeof(payload));
+ payload.version = 1;
+ payload.status = status;
+
+ return ps3_sys_manager_write(dev, &header, &payload);
+}
+
+/**
+ * ps3_sys_manager_handle_event - Second stage event msg handler.
+ *
+ */
+
+static int ps3_sys_manager_handle_event(struct ps3_vuart_port_device *dev)
+{
+ int result;
+ struct {
+ u8 version;
+ u8 type;
+ u8 reserved_1[2];
+ u32 value;
+ u8 reserved_2[8];
+ } event;
+
+ BUILD_BUG_ON(sizeof(event) != 16);
+
+ result = ps3_vuart_read(dev, &event, sizeof(event));
+ BUG_ON(result);
+
+ if (event.version != 1) {
+ dev_dbg(&dev->core, "%s:%d: unsupported event version (%u)\n",
+ __func__, __LINE__, event.version);
+ return -EIO;
+ }
+
+ switch (event.type) {
+ case PS3_SM_EVENT_POWER_PRESSED:
+ dev_dbg(&dev->core, "%s:%d: POWER_PRESSED\n",
+ __func__, __LINE__);
+ break;
+ case PS3_SM_EVENT_POWER_RELEASED:
+ dev_dbg(&dev->core, "%s:%d: POWER_RELEASED (%u ms)\n",
+ __func__, __LINE__, event.value);
+ kill_cad_pid(SIGINT, 1);
+ break;
+ case PS3_SM_EVENT_THERMAL_ALERT:
+ dev_dbg(&dev->core, "%s:%d: THERMAL_ALERT (zone %u)\n",
+ __func__, __LINE__, event.value);
+ printk(KERN_INFO "PS3 Thermal Alert Zone %u\n", event.value);
+ break;
+ case PS3_SM_EVENT_THERMAL_CLEARED:
+ dev_dbg(&dev->core, "%s:%d: THERMAL_CLEARED (zone %u)\n",
+ __func__, __LINE__, event.value);
+ break;
+ default:
+ dev_dbg(&dev->core, "%s:%d: unknown event (%u)\n",
+ __func__, __LINE__, event.type);
+ return -EIO;
+ }
+
+ return 0;
+}
+/**
+ * ps3_sys_manager_handle_cmd - Second stage command msg handler.
+ *
+ * The system manager sends this in reply to a 'request' message from the guest.
+ */
+
+static int ps3_sys_manager_handle_cmd(struct ps3_vuart_port_device *dev)
+{
+ int result;
+ struct {
+ u8 version;
+ u8 type;
+ u8 reserved_1[14];
+ } cmd;
+
+ BUILD_BUG_ON(sizeof(cmd) != 16);
+
+ dev_dbg(&dev->core, "%s:%d\n", __func__, __LINE__);
+
+ result = ps3_vuart_read(dev, &cmd, sizeof(cmd));
+
+ if(result)
+ return result;
+
+ if (cmd.version != 1) {
+ dev_dbg(&dev->core, "%s:%d: unsupported cmd version (%u)\n",
+ __func__, __LINE__, cmd.version);
+ return -EIO;
+ }
+
+ if (cmd.type != PS3_SM_CMD_SHUTDOWN) {
+ dev_dbg(&dev->core, "%s:%d: unknown cmd (%u)\n",
+ __func__, __LINE__, cmd.type);
+ return -EIO;
+ }
+
+ ps3_sys_manager_send_response(dev, 0);
+ return 0;
+}
+
+/**
+ * ps3_sys_manager_handle_msg - First stage msg handler.
+ *
+ */
+
+static int ps3_sys_manager_handle_msg(struct ps3_vuart_port_device *dev)
+{
+ int result;
+ struct ps3_sys_manager_header header;
+
+ result = ps3_vuart_read(dev, &header,
+ sizeof(struct ps3_sys_manager_header));
+
+ if(result)
+ return result;
+
+ if (header.version != 1) {
+ dev_dbg(&dev->core, "%s:%d: unsupported header version (%u)\n",
+ __func__, __LINE__, header.version);
+ goto fail_header;
+ }
+
+ BUILD_BUG_ON(sizeof(header) != 16);
+ BUG_ON(header.size != 16);
+ BUG_ON(header.payload_size != 16);
+
+ switch (header.service_id) {
+ case PS3_SM_SERVICE_ID_EXTERN_EVENT:
+ dev_dbg(&dev->core, "%s:%d: EVENT\n", __func__, __LINE__);
+ return ps3_sys_manager_handle_event(dev);
+ case PS3_SM_SERVICE_ID_COMMAND:
+ dev_dbg(&dev->core, "%s:%d: COMMAND\n", __func__, __LINE__);
+ return ps3_sys_manager_handle_cmd(dev);
+ default:
+ dev_dbg(&dev->core, "%s:%d: unknown service_id (%u)\n",
+ __func__, __LINE__, header.service_id);
+ break;
+ }
+ goto fail_id;
+
+fail_header:
+ ps3_vuart_clear_rx_bytes(dev, 0);
+ return -EIO;
+fail_id:
+ ps3_vuart_clear_rx_bytes(dev, header.payload_size);
+ return -EIO;
+}
+
+/**
+ * ps3_sys_manager_work - Asyncronous read handler.
+ *
+ * Signaled when a complete message arrives at the vuart port.
+ */
+
+static void ps3_sys_manager_work(struct work_struct *work)
+{
+ struct ps3_vuart_port_device *dev = ps3_vuart_work_to_port_device(work);
+
+ ps3_sys_manager_handle_msg(dev);
+ ps3_vuart_read_async(dev, ps3_sys_manager_work, PS3_SM_RX_MSG_LEN);
+}
+
+struct {
+ struct ps3_vuart_port_device *dev;
+} static drv_priv;
+
+/**
+ * ps3_sys_manager_restart - The final platform machine_restart routine.
+ *
+ * This routine never returns. The routine disables asyncronous vuart reads
+ * then spins calling ps3_sys_manager_handle_msg() to receive and acknowledge
+ * the shutdown command sent from the system manager. Soon after the
+ * acknowledgement is sent the lpar is destroyed by the HV. This routine
+ * should only be called from ps3_restart().
+ */
+
+void ps3_sys_manager_restart(void)
+{
+ struct ps3_vuart_port_device *dev = drv_priv.dev;
+
+ BUG_ON(!drv_priv.dev);
+
+ dev_dbg(&dev->core, "%s:%d\n", __func__, __LINE__);
+
+ ps3_vuart_cancel_async(dev);
+
+ ps3_sys_manager_send_attr(dev, 0);
+ ps3_sys_manager_send_next_op(dev, PS3_SM_NEXT_OP_LPAR_REBOOT,
+ PS3_SM_WAKE_DEFAULT);
+ ps3_sys_manager_send_request_shutdown(dev);
+
+ printk(KERN_EMERG "System Halted, OK to turn off power\n");
+
+ while(1)
+ ps3_sys_manager_handle_msg(dev);
+}
+
+/**
+ * ps3_sys_manager_power_off - The final platform machine_power_off routine.
+ *
+ * This routine never returns. The routine disables asyncronous vuart reads
+ * then spins calling ps3_sys_manager_handle_msg() to receive and acknowledge
+ * the shutdown command sent from the system manager. Soon after the
+ * acknowledgement is sent the lpar is destroyed by the HV. This routine
+ * should only be called from ps3_power_off().
+ */
+
+void ps3_sys_manager_power_off(void)
+{
+ struct ps3_vuart_port_device *dev = drv_priv.dev;
+
+ BUG_ON(!drv_priv.dev);
+
+ dev_dbg(&dev->core, "%s:%d\n", __func__, __LINE__);
+
+ ps3_vuart_cancel_async(dev);
+
+ ps3_sys_manager_send_next_op(dev, PS3_SM_NEXT_OP_SYS_SHUTDOWN,
+ PS3_SM_WAKE_DEFAULT);
+ ps3_sys_manager_send_request_shutdown(dev);
+
+ printk(KERN_EMERG "System Halted, OK to turn off power\n");
+
+ while(1)
+ ps3_sys_manager_handle_msg(dev);
+}
+
+static int ps3_sys_manager_probe(struct ps3_vuart_port_device *dev)
+{
+ int result;
+
+ dev_dbg(&dev->core, "%s:%d\n", __func__, __LINE__);
+
+ BUG_ON(drv_priv.dev);
+ drv_priv.dev = dev;
+
+ result = ps3_sys_manager_send_attr(dev, PS3_SM_ATTR_ALL);
+ BUG_ON(result);
+
+ result = ps3_vuart_read_async(dev, ps3_sys_manager_work,
+ PS3_SM_RX_MSG_LEN);
+ BUG_ON(result);
+
+ return result;
+}
+
+static struct ps3_vuart_port_driver ps3_sys_manager = {
+ .match_id = PS3_MATCH_ID_SYSTEM_MANAGER,
+ .core = {
+ .name = "ps3_sys_manager",
+ },
+ .probe = ps3_sys_manager_probe,
+};
+
+static int __init ps3_sys_manager_init(void)
+{
+ return ps3_vuart_port_driver_register(&ps3_sys_manager);
+}
+
+module_init(ps3_sys_manager_init);
diff --git a/drivers/ps3/vuart.c b/drivers/ps3/vuart.c
index ef8fd4c..7462981 100644
--- a/drivers/ps3/vuart.c
+++ b/drivers/ps3/vuart.c
@@ -21,8 +21,10 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/interrupt.h>
+#include <linux/workqueue.h>
#include <asm/ps3.h>
+#include <asm/firmware.h>
#include <asm/lv1call.h>
#include <asm/bitops.h>
@@ -30,7 +32,7 @@
MODULE_AUTHOR("Sony Corporation");
MODULE_LICENSE("GPL v2");
-MODULE_DESCRIPTION("ps3 vuart");
+MODULE_DESCRIPTION("PS3 vuart");
/**
* vuart - An inter-partition data link service.
@@ -157,7 +159,7 @@
unsigned long size;
unsigned long val;
- result = lv1_get_virtual_uart_param(dev->port_number,
+ result = lv1_get_virtual_uart_param(dev->priv->port_number,
PARAM_TX_TRIGGER, &trig->tx);
if (result) {
@@ -166,7 +168,7 @@
return result;
}
- result = lv1_get_virtual_uart_param(dev->port_number,
+ result = lv1_get_virtual_uart_param(dev->priv->port_number,
PARAM_RX_BUF_SIZE, &size);
if (result) {
@@ -175,7 +177,7 @@
return result;
}
- result = lv1_get_virtual_uart_param(dev->port_number,
+ result = lv1_get_virtual_uart_param(dev->priv->port_number,
PARAM_RX_TRIGGER, &val);
if (result) {
@@ -198,7 +200,7 @@
int result;
unsigned long size;
- result = lv1_set_virtual_uart_param(dev->port_number,
+ result = lv1_set_virtual_uart_param(dev->priv->port_number,
PARAM_TX_TRIGGER, tx);
if (result) {
@@ -207,7 +209,7 @@
return result;
}
- result = lv1_get_virtual_uart_param(dev->port_number,
+ result = lv1_get_virtual_uart_param(dev->priv->port_number,
PARAM_RX_BUF_SIZE, &size);
if (result) {
@@ -216,7 +218,7 @@
return result;
}
- result = lv1_set_virtual_uart_param(dev->port_number,
+ result = lv1_set_virtual_uart_param(dev->priv->port_number,
PARAM_RX_TRIGGER, size - rx);
if (result) {
@@ -232,9 +234,9 @@
}
static int ps3_vuart_get_rx_bytes_waiting(struct ps3_vuart_port_device *dev,
- unsigned long *bytes_waiting)
+ u64 *bytes_waiting)
{
- int result = lv1_get_virtual_uart_param(dev->port_number,
+ int result = lv1_get_virtual_uart_param(dev->priv->port_number,
PARAM_RX_BYTES, bytes_waiting);
if (result)
@@ -253,10 +255,10 @@
dev_dbg(&dev->core, "%s:%d: %lxh\n", __func__, __LINE__, mask);
- dev->interrupt_mask = mask;
+ dev->priv->interrupt_mask = mask;
- result = lv1_set_virtual_uart_param(dev->port_number,
- PARAM_INTERRUPT_MASK, dev->interrupt_mask);
+ result = lv1_set_virtual_uart_param(dev->priv->port_number,
+ PARAM_INTERRUPT_MASK, dev->priv->interrupt_mask);
if (result)
dev_dbg(&dev->core, "%s:%d: interrupt_mask failed: %s\n",
@@ -265,62 +267,64 @@
return result;
}
-static int ps3_vuart_get_interrupt_mask(struct ps3_vuart_port_device *dev,
+static int ps3_vuart_get_interrupt_status(struct ps3_vuart_port_device *dev,
unsigned long *status)
{
- int result = lv1_get_virtual_uart_param(dev->port_number,
- PARAM_INTERRUPT_STATUS, status);
+ u64 tmp;
+ int result = lv1_get_virtual_uart_param(dev->priv->port_number,
+ PARAM_INTERRUPT_STATUS, &tmp);
if (result)
dev_dbg(&dev->core, "%s:%d: interrupt_status failed: %s\n",
__func__, __LINE__, ps3_result(result));
+ *status = tmp & dev->priv->interrupt_mask;
+
dev_dbg(&dev->core, "%s:%d: m %lxh, s %lxh, m&s %lxh\n",
- __func__, __LINE__, dev->interrupt_mask, *status,
- dev->interrupt_mask & *status);
+ __func__, __LINE__, dev->priv->interrupt_mask, tmp, *status);
return result;
}
int ps3_vuart_enable_interrupt_tx(struct ps3_vuart_port_device *dev)
{
- return (dev->interrupt_mask & INTERRUPT_MASK_TX) ? 0
- : ps3_vuart_set_interrupt_mask(dev, dev->interrupt_mask
+ return (dev->priv->interrupt_mask & INTERRUPT_MASK_TX) ? 0
+ : ps3_vuart_set_interrupt_mask(dev, dev->priv->interrupt_mask
| INTERRUPT_MASK_TX);
}
int ps3_vuart_enable_interrupt_rx(struct ps3_vuart_port_device *dev)
{
- return (dev->interrupt_mask & INTERRUPT_MASK_RX) ? 0
- : ps3_vuart_set_interrupt_mask(dev, dev->interrupt_mask
+ return (dev->priv->interrupt_mask & INTERRUPT_MASK_RX) ? 0
+ : ps3_vuart_set_interrupt_mask(dev, dev->priv->interrupt_mask
| INTERRUPT_MASK_RX);
}
int ps3_vuart_enable_interrupt_disconnect(struct ps3_vuart_port_device *dev)
{
- return (dev->interrupt_mask & INTERRUPT_MASK_DISCONNECT) ? 0
- : ps3_vuart_set_interrupt_mask(dev, dev->interrupt_mask
+ return (dev->priv->interrupt_mask & INTERRUPT_MASK_DISCONNECT) ? 0
+ : ps3_vuart_set_interrupt_mask(dev, dev->priv->interrupt_mask
| INTERRUPT_MASK_DISCONNECT);
}
int ps3_vuart_disable_interrupt_tx(struct ps3_vuart_port_device *dev)
{
- return (dev->interrupt_mask & INTERRUPT_MASK_TX)
- ? ps3_vuart_set_interrupt_mask(dev, dev->interrupt_mask
+ return (dev->priv->interrupt_mask & INTERRUPT_MASK_TX)
+ ? ps3_vuart_set_interrupt_mask(dev, dev->priv->interrupt_mask
& ~INTERRUPT_MASK_TX) : 0;
}
int ps3_vuart_disable_interrupt_rx(struct ps3_vuart_port_device *dev)
{
- return (dev->interrupt_mask & INTERRUPT_MASK_RX)
- ? ps3_vuart_set_interrupt_mask(dev, dev->interrupt_mask
+ return (dev->priv->interrupt_mask & INTERRUPT_MASK_RX)
+ ? ps3_vuart_set_interrupt_mask(dev, dev->priv->interrupt_mask
& ~INTERRUPT_MASK_RX) : 0;
}
int ps3_vuart_disable_interrupt_disconnect(struct ps3_vuart_port_device *dev)
{
- return (dev->interrupt_mask & INTERRUPT_MASK_DISCONNECT)
- ? ps3_vuart_set_interrupt_mask(dev, dev->interrupt_mask
+ return (dev->priv->interrupt_mask & INTERRUPT_MASK_DISCONNECT)
+ ? ps3_vuart_set_interrupt_mask(dev, dev->priv->interrupt_mask
& ~INTERRUPT_MASK_DISCONNECT) : 0;
}
@@ -335,9 +339,7 @@
{
int result;
- dev_dbg(&dev->core, "%s:%d: %xh\n", __func__, __LINE__, bytes);
-
- result = lv1_write_virtual_uart(dev->port_number,
+ result = lv1_write_virtual_uart(dev->priv->port_number,
ps3_mm_phys_to_lpar(__pa(buf)), bytes, bytes_written);
if (result) {
@@ -346,10 +348,10 @@
return result;
}
- dev->stats.bytes_written += *bytes_written;
+ dev->priv->stats.bytes_written += *bytes_written;
- dev_dbg(&dev->core, "%s:%d: wrote %lxh/%xh=>%lxh\n", __func__,
- __LINE__, *bytes_written, bytes, dev->stats.bytes_written);
+ dev_dbg(&dev->core, "%s:%d: wrote %lxh/%xh=>%lxh\n", __func__, __LINE__,
+ *bytes_written, bytes, dev->priv->stats.bytes_written);
return result;
}
@@ -367,7 +369,7 @@
dev_dbg(&dev->core, "%s:%d: %xh\n", __func__, __LINE__, bytes);
- result = lv1_read_virtual_uart(dev->port_number,
+ result = lv1_read_virtual_uart(dev->priv->port_number,
ps3_mm_phys_to_lpar(__pa(buf)), bytes, bytes_read);
if (result) {
@@ -376,15 +378,58 @@
return result;
}
- dev->stats.bytes_read += *bytes_read;
+ dev->priv->stats.bytes_read += *bytes_read;
dev_dbg(&dev->core, "%s:%d: read %lxh/%xh=>%lxh\n", __func__, __LINE__,
- *bytes_read, bytes, dev->stats.bytes_read);
+ *bytes_read, bytes, dev->priv->stats.bytes_read);
return result;
}
/**
+ * ps3_vuart_clear_rx_bytes - Discard bytes received.
+ * @bytes: Max byte count to discard, zero = all pending.
+ *
+ * Used to clear pending rx interrupt source. Will not block.
+ */
+
+void ps3_vuart_clear_rx_bytes(struct ps3_vuart_port_device *dev,
+ unsigned int bytes)
+{
+ int result;
+ u64 bytes_waiting;
+ void* tmp;
+
+ result = ps3_vuart_get_rx_bytes_waiting(dev, &bytes_waiting);
+
+ BUG_ON(result);
+
+ bytes = bytes ? min(bytes, (unsigned int)bytes_waiting) : bytes_waiting;
+
+ dev_dbg(&dev->core, "%s:%d: %u\n", __func__, __LINE__, bytes);
+
+ if (!bytes)
+ return;
+
+ /* Add some extra space for recently arrived data. */
+
+ bytes += 128;
+
+ tmp = kmalloc(bytes, GFP_KERNEL);
+
+ if (!tmp)
+ return;
+
+ ps3_vuart_raw_read(dev, tmp, bytes, &bytes_waiting);
+
+ kfree(tmp);
+
+ /* Don't include these bytes in the stats. */
+
+ dev->priv->stats.bytes_read -= bytes_waiting;
+}
+
+/**
* struct list_buffer - An element for a port device fifo buffer list.
*/
@@ -416,14 +461,14 @@
dev_dbg(&dev->core, "%s:%d: %u(%xh) bytes\n", __func__, __LINE__,
bytes, bytes);
- spin_lock_irqsave(&dev->tx_list.lock, flags);
+ spin_lock_irqsave(&dev->priv->tx_list.lock, flags);
- if (list_empty(&dev->tx_list.head)) {
+ if (list_empty(&dev->priv->tx_list.head)) {
unsigned long bytes_written;
result = ps3_vuart_raw_write(dev, buf, bytes, &bytes_written);
- spin_unlock_irqrestore(&dev->tx_list.lock, flags);
+ spin_unlock_irqrestore(&dev->priv->tx_list.lock, flags);
if (result) {
dev_dbg(&dev->core,
@@ -441,7 +486,7 @@
bytes -= bytes_written;
buf += bytes_written;
} else
- spin_unlock_irqrestore(&dev->tx_list.lock, flags);
+ spin_unlock_irqrestore(&dev->priv->tx_list.lock, flags);
lb = kmalloc(sizeof(struct list_buffer) + bytes, GFP_KERNEL);
@@ -454,10 +499,10 @@
lb->tail = lb->data + bytes;
lb->dbg_number = ++dbg_number;
- spin_lock_irqsave(&dev->tx_list.lock, flags);
- list_add_tail(&lb->link, &dev->tx_list.head);
+ spin_lock_irqsave(&dev->priv->tx_list.lock, flags);
+ list_add_tail(&lb->link, &dev->priv->tx_list.head);
ps3_vuart_enable_interrupt_tx(dev);
- spin_unlock_irqrestore(&dev->tx_list.lock, flags);
+ spin_unlock_irqrestore(&dev->priv->tx_list.lock, flags);
dev_dbg(&dev->core, "%s:%d: queued buf_%lu, %xh bytes\n",
__func__, __LINE__, lb->dbg_number, bytes);
@@ -484,47 +529,83 @@
dev_dbg(&dev->core, "%s:%d: %u(%xh) bytes\n", __func__, __LINE__,
bytes, bytes);
- spin_lock_irqsave(&dev->rx_list.lock, flags);
+ spin_lock_irqsave(&dev->priv->rx_list.lock, flags);
- if (dev->rx_list.bytes_held < bytes) {
- spin_unlock_irqrestore(&dev->rx_list.lock, flags);
+ if (dev->priv->rx_list.bytes_held < bytes) {
+ spin_unlock_irqrestore(&dev->priv->rx_list.lock, flags);
dev_dbg(&dev->core, "%s:%d: starved for %lxh bytes\n",
- __func__, __LINE__, bytes - dev->rx_list.bytes_held);
+ __func__, __LINE__,
+ bytes - dev->priv->rx_list.bytes_held);
return -EAGAIN;
}
- list_for_each_entry_safe(lb, n, &dev->rx_list.head, link) {
+ list_for_each_entry_safe(lb, n, &dev->priv->rx_list.head, link) {
bytes_read = min((unsigned int)(lb->tail - lb->head), bytes);
memcpy(buf, lb->head, bytes_read);
buf += bytes_read;
bytes -= bytes_read;
- dev->rx_list.bytes_held -= bytes_read;
+ dev->priv->rx_list.bytes_held -= bytes_read;
if (bytes_read < lb->tail - lb->head) {
lb->head += bytes_read;
- spin_unlock_irqrestore(&dev->rx_list.lock, flags);
-
- dev_dbg(&dev->core,
- "%s:%d: dequeued buf_%lu, %lxh bytes\n",
- __func__, __LINE__, lb->dbg_number, bytes_read);
+ dev_dbg(&dev->core, "%s:%d: buf_%lu: dequeued %lxh "
+ "bytes\n", __func__, __LINE__, lb->dbg_number,
+ bytes_read);
+ spin_unlock_irqrestore(&dev->priv->rx_list.lock, flags);
return 0;
}
- dev_dbg(&dev->core, "%s:%d free buf_%lu\n", __func__, __LINE__,
- lb->dbg_number);
+ dev_dbg(&dev->core, "%s:%d: buf_%lu: free, dequeued %lxh "
+ "bytes\n", __func__, __LINE__, lb->dbg_number,
+ bytes_read);
list_del(&lb->link);
kfree(lb);
}
- spin_unlock_irqrestore(&dev->rx_list.lock, flags);
- dev_dbg(&dev->core, "%s:%d: dequeued buf_%lu, %xh bytes\n",
- __func__, __LINE__, lb->dbg_number, bytes);
+ spin_unlock_irqrestore(&dev->priv->rx_list.lock, flags);
+ return 0;
+}
+
+int ps3_vuart_read_async(struct ps3_vuart_port_device *dev, work_func_t func,
+ unsigned int bytes)
+{
+ unsigned long flags;
+
+ if(dev->priv->work.trigger) {
+ dev_dbg(&dev->core, "%s:%d: warning, multiple calls\n",
+ __func__, __LINE__);
+ return -EAGAIN;
+ }
+
+ BUG_ON(!bytes);
+
+ PREPARE_WORK(&dev->priv->work.work, func);
+
+ spin_lock_irqsave(&dev->priv->work.lock, flags);
+ if(dev->priv->rx_list.bytes_held >= bytes) {
+ dev_dbg(&dev->core, "%s:%d: schedule_work %xh bytes\n",
+ __func__, __LINE__, bytes);
+ schedule_work(&dev->priv->work.work);
+ spin_unlock_irqrestore(&dev->priv->work.lock, flags);
+ return 0;
+ }
+
+ dev->priv->work.trigger = bytes;
+ spin_unlock_irqrestore(&dev->priv->work.lock, flags);
+
+ dev_dbg(&dev->core, "%s:%d: waiting for %u(%xh) bytes\n", __func__,
+ __LINE__, bytes, bytes);
return 0;
}
+void ps3_vuart_cancel_async(struct ps3_vuart_port_device *dev)
+{
+ dev->priv->work.trigger = 0;
+}
+
/**
* ps3_vuart_handle_interrupt_tx - third stage transmit interrupt handler
*
@@ -542,9 +623,9 @@
dev_dbg(&dev->core, "%s:%d\n", __func__, __LINE__);
- spin_lock_irqsave(&dev->tx_list.lock, flags);
+ spin_lock_irqsave(&dev->priv->tx_list.lock, flags);
- list_for_each_entry_safe(lb, n, &dev->tx_list.head, link) {
+ list_for_each_entry_safe(lb, n, &dev->priv->tx_list.head, link) {
unsigned long bytes_written;
@@ -578,7 +659,7 @@
ps3_vuart_disable_interrupt_tx(dev);
port_full:
- spin_unlock_irqrestore(&dev->tx_list.lock, flags);
+ spin_unlock_irqrestore(&dev->priv->tx_list.lock, flags);
dev_dbg(&dev->core, "%s:%d wrote %lxh bytes total\n",
__func__, __LINE__, bytes_total);
return result;
@@ -609,7 +690,7 @@
BUG_ON(!bytes);
- /* add some extra space for recently arrived data */
+ /* Add some extra space for recently arrived data. */
bytes += 128;
@@ -624,14 +705,23 @@
lb->tail = lb->data + bytes;
lb->dbg_number = ++dbg_number;
- spin_lock_irqsave(&dev->rx_list.lock, flags);
- list_add_tail(&lb->link, &dev->rx_list.head);
- dev->rx_list.bytes_held += bytes;
- spin_unlock_irqrestore(&dev->rx_list.lock, flags);
+ spin_lock_irqsave(&dev->priv->rx_list.lock, flags);
+ list_add_tail(&lb->link, &dev->priv->rx_list.head);
+ dev->priv->rx_list.bytes_held += bytes;
+ spin_unlock_irqrestore(&dev->priv->rx_list.lock, flags);
- dev_dbg(&dev->core, "%s:%d: queued buf_%lu, %lxh bytes\n",
+ dev_dbg(&dev->core, "%s:%d: buf_%lu: queued %lxh bytes\n",
__func__, __LINE__, lb->dbg_number, bytes);
+ spin_lock_irqsave(&dev->priv->work.lock, flags);
+ if(dev->priv->work.trigger
+ && dev->priv->rx_list.bytes_held >= dev->priv->work.trigger) {
+ dev_dbg(&dev->core, "%s:%d: schedule_work %lxh bytes\n",
+ __func__, __LINE__, dev->priv->work.trigger);
+ dev->priv->work.trigger = 0;
+ schedule_work(&dev->priv->work.work);
+ }
+ spin_unlock_irqrestore(&dev->priv->work.lock, flags);
return 0;
}
@@ -656,7 +746,7 @@
int result;
unsigned long status;
- result = ps3_vuart_get_interrupt_mask(dev, &status);
+ result = ps3_vuart_get_interrupt_status(dev, &status);
if (result)
return result;
@@ -665,21 +755,21 @@
status);
if (status & INTERRUPT_MASK_DISCONNECT) {
- dev->stats.disconnect_interrupts++;
+ dev->priv->stats.disconnect_interrupts++;
result = ps3_vuart_handle_interrupt_disconnect(dev);
if (result)
ps3_vuart_disable_interrupt_disconnect(dev);
}
if (status & INTERRUPT_MASK_TX) {
- dev->stats.tx_interrupts++;
+ dev->priv->stats.tx_interrupts++;
result = ps3_vuart_handle_interrupt_tx(dev);
if (result)
ps3_vuart_disable_interrupt_tx(dev);
}
if (status & INTERRUPT_MASK_RX) {
- dev->stats.rx_interrupts++;
+ dev->priv->stats.rx_interrupts++;
result = ps3_vuart_handle_interrupt_rx(dev);
if (result)
ps3_vuart_disable_interrupt_rx(dev);
@@ -688,12 +778,13 @@
return 0;
}
-struct vuart_private {
- unsigned int in_use;
- unsigned int virq;
- struct ps3_vuart_port_device *devices[PORT_COUNT];
+struct vuart_bus_priv {
const struct ports_bmp bmp;
-};
+ unsigned int virq;
+ struct semaphore probe_mutex;
+ int use_count;
+ struct ps3_vuart_port_device *devices[PORT_COUNT];
+} static vuart_bus_priv;
/**
* ps3_vuart_irq_handler - first stage interrupt handler
@@ -705,25 +796,25 @@
static irqreturn_t ps3_vuart_irq_handler(int irq, void *_private)
{
- struct vuart_private *private;
+ struct vuart_bus_priv *bus_priv;
BUG_ON(!_private);
- private = (struct vuart_private *)_private;
+ bus_priv = (struct vuart_bus_priv *)_private;
while (1) {
unsigned int port;
- dump_ports_bmp(&private->bmp);
+ dump_ports_bmp(&bus_priv->bmp);
- port = (BITS_PER_LONG - 1) - __ilog2(private->bmp.status);
+ port = (BITS_PER_LONG - 1) - __ilog2(bus_priv->bmp.status);
if (port == BITS_PER_LONG)
break;
BUG_ON(port >= PORT_COUNT);
- BUG_ON(!private->devices[port]);
+ BUG_ON(!bus_priv->devices[port]);
- ps3_vuart_handle_port_interrupt(private->devices[port]);
+ ps3_vuart_handle_port_interrupt(bus_priv->devices[port]);
}
return IRQ_HANDLED;
@@ -744,12 +835,10 @@
return result;
}
-static struct vuart_private vuart_private;
-
static int ps3_vuart_probe(struct device *_dev)
{
int result;
- unsigned long tmp;
+ unsigned int port_number;
struct ps3_vuart_port_device *dev = to_ps3_vuart_port_device(_dev);
struct ps3_vuart_port_driver *drv =
to_ps3_vuart_port_driver(_dev->driver);
@@ -758,7 +847,12 @@
BUG_ON(!drv);
- result = ps3_vuart_match_id_to_port(dev->match_id, &dev->port_number);
+ down(&vuart_bus_priv.probe_mutex);
+
+ /* Setup vuart_bus_priv.devices[]. */
+
+ result = ps3_vuart_match_id_to_port(dev->match_id,
+ &port_number);
if (result) {
dev_dbg(&dev->core, "%s:%d: unknown match_id (%d)\n",
@@ -767,24 +861,41 @@
goto fail_match;
}
- if (vuart_private.devices[dev->port_number]) {
+ if (vuart_bus_priv.devices[port_number]) {
dev_dbg(&dev->core, "%s:%d: port busy (%d)\n", __func__,
- __LINE__, dev->port_number);
+ __LINE__, port_number);
result = -EBUSY;
goto fail_match;
}
- vuart_private.devices[dev->port_number] = dev;
+ vuart_bus_priv.devices[port_number] = dev;
- INIT_LIST_HEAD(&dev->tx_list.head);
- spin_lock_init(&dev->tx_list.lock);
- INIT_LIST_HEAD(&dev->rx_list.head);
- spin_lock_init(&dev->rx_list.lock);
+ /* Setup dev->priv. */
- vuart_private.in_use++;
- if (vuart_private.in_use == 1) {
+ dev->priv = kzalloc(sizeof(struct ps3_vuart_port_priv), GFP_KERNEL);
+
+ if (!dev->priv) {
+ result = -ENOMEM;
+ goto fail_alloc;
+ }
+
+ dev->priv->port_number = port_number;
+
+ INIT_LIST_HEAD(&dev->priv->tx_list.head);
+ spin_lock_init(&dev->priv->tx_list.lock);
+
+ INIT_LIST_HEAD(&dev->priv->rx_list.head);
+ spin_lock_init(&dev->priv->rx_list.lock);
+
+ INIT_WORK(&dev->priv->work.work, NULL);
+ spin_lock_init(&dev->priv->work.lock);
+ dev->priv->work.trigger = 0;
+ dev->priv->work.dev = dev;
+
+ if (++vuart_bus_priv.use_count == 1) {
+
result = ps3_alloc_vuart_irq(PS3_BINDING_CPU_ANY,
- (void*)&vuart_private.bmp.status, &vuart_private.virq);
+ (void*)&vuart_bus_priv.bmp.status, &vuart_bus_priv.virq);
if (result) {
dev_dbg(&dev->core,
@@ -794,8 +905,8 @@
goto fail_alloc_irq;
}
- result = request_irq(vuart_private.virq, ps3_vuart_irq_handler,
- IRQF_DISABLED, "vuart", &vuart_private);
+ result = request_irq(vuart_bus_priv.virq, ps3_vuart_irq_handler,
+ IRQF_DISABLED, "vuart", &vuart_bus_priv);
if (result) {
dev_info(&dev->core, "%s:%d: request_irq failed (%d)\n",
@@ -804,10 +915,11 @@
}
}
- ps3_vuart_set_interrupt_mask(dev, INTERRUPT_MASK_RX);
-
/* clear stale pending interrupts */
- ps3_vuart_get_interrupt_mask(dev, &tmp);
+
+ ps3_vuart_clear_rx_bytes(dev, 0);
+
+ ps3_vuart_set_interrupt_mask(dev, INTERRUPT_MASK_RX);
ps3_vuart_set_triggers(dev, 1, 1);
@@ -822,20 +934,27 @@
if (result) {
dev_dbg(&dev->core, "%s:%d: drv->probe failed\n",
__func__, __LINE__);
+ down(&vuart_bus_priv.probe_mutex);
goto fail_probe;
}
+ up(&vuart_bus_priv.probe_mutex);
+
return result;
fail_probe:
+ ps3_vuart_set_interrupt_mask(dev, 0);
fail_request_irq:
- vuart_private.in_use--;
- if (!vuart_private.in_use) {
- ps3_free_vuart_irq(vuart_private.virq);
- vuart_private.virq = NO_IRQ;
- }
+ ps3_free_vuart_irq(vuart_bus_priv.virq);
+ vuart_bus_priv.virq = NO_IRQ;
fail_alloc_irq:
+ --vuart_bus_priv.use_count;
+ kfree(dev->priv);
+ dev->priv = NULL;
+fail_alloc:
+ vuart_bus_priv.devices[port_number] = 0;
fail_match:
+ up(&vuart_bus_priv.probe_mutex);
dev_dbg(&dev->core, "%s:%d failed\n", __func__, __LINE__);
return result;
}
@@ -846,10 +965,12 @@
struct ps3_vuart_port_driver *drv =
to_ps3_vuart_port_driver(_dev->driver);
+ down(&vuart_bus_priv.probe_mutex);
+
dev_dbg(&dev->core, "%s:%d: %s\n", __func__, __LINE__,
dev->core.bus_id);
- BUG_ON(vuart_private.in_use < 1);
+ BUG_ON(vuart_bus_priv.use_count < 1);
if (drv->remove)
drv->remove(dev);
@@ -857,13 +978,19 @@
dev_dbg(&dev->core, "%s:%d: %s no remove method\n", __func__,
__LINE__, dev->core.bus_id);
- vuart_private.in_use--;
+ vuart_bus_priv.devices[dev->priv->port_number] = 0;
- if (!vuart_private.in_use) {
- free_irq(vuart_private.virq, &vuart_private);
- ps3_free_vuart_irq(vuart_private.virq);
- vuart_private.virq = NO_IRQ;
+ if (--vuart_bus_priv.use_count == 0) {
+ BUG();
+ free_irq(vuart_bus_priv.virq, &vuart_bus_priv);
+ ps3_free_vuart_irq(vuart_bus_priv.virq);
+ vuart_bus_priv.virq = NO_IRQ;
}
+
+ kfree(dev->priv);
+ dev->priv = NULL;
+
+ up(&vuart_bus_priv.probe_mutex);
return 0;
}
@@ -884,12 +1011,12 @@
}
/**
- * ps3_vuart - The vuart instance.
+ * ps3_vuart_bus - The vuart bus instance.
*
* The vuart is managed as a bus that port devices connect to.
*/
-struct bus_type ps3_vuart = {
+struct bus_type ps3_vuart_bus = {
.name = "ps3_vuart",
.match = ps3_vuart_match,
.probe = ps3_vuart_probe,
@@ -897,24 +1024,30 @@
.shutdown = ps3_vuart_shutdown,
};
-int __init ps3_vuart_init(void)
+int __init ps3_vuart_bus_init(void)
{
int result;
pr_debug("%s:%d:\n", __func__, __LINE__);
- result = bus_register(&ps3_vuart);
+
+ if (!firmware_has_feature(FW_FEATURE_PS3_LV1))
+ return 0;
+
+ init_MUTEX(&vuart_bus_priv.probe_mutex);
+ result = bus_register(&ps3_vuart_bus);
BUG_ON(result);
+
return result;
}
-void __exit ps3_vuart_exit(void)
+void __exit ps3_vuart_bus_exit(void)
{
pr_debug("%s:%d:\n", __func__, __LINE__);
- bus_unregister(&ps3_vuart);
+ bus_unregister(&ps3_vuart_bus);
}
-core_initcall(ps3_vuart_init);
-module_exit(ps3_vuart_exit);
+core_initcall(ps3_vuart_bus_init);
+module_exit(ps3_vuart_bus_exit);
/**
* ps3_vuart_port_release_device - Remove a vuart port device.
@@ -922,11 +1055,14 @@
static void ps3_vuart_port_release_device(struct device *_dev)
{
- struct ps3_vuart_port_device *dev = to_ps3_vuart_port_device(_dev);
#if defined(DEBUG)
- memset(dev, 0xad, sizeof(struct ps3_vuart_port_device));
+ struct ps3_vuart_port_device *dev = to_ps3_vuart_port_device(_dev);
+
+ dev_dbg(&dev->core, "%s:%d\n", __func__, __LINE__);
+
+ BUG_ON(dev->priv && "forgot to free");
+ memset(&dev->core, 0, sizeof(dev->core));
#endif
- kfree(dev);
}
/**
@@ -935,11 +1071,12 @@
int ps3_vuart_port_device_register(struct ps3_vuart_port_device *dev)
{
- int result;
static unsigned int dev_count = 1;
+ BUG_ON(dev->priv && "forgot to free");
+
dev->core.parent = NULL;
- dev->core.bus = &ps3_vuart;
+ dev->core.bus = &ps3_vuart_bus;
dev->core.release = ps3_vuart_port_release_device;
snprintf(dev->core.bus_id, sizeof(dev->core.bus_id), "vuart_%02x",
@@ -947,9 +1084,7 @@
dev_dbg(&dev->core, "%s:%d register\n", __func__, __LINE__);
- result = device_register(&dev->core);
-
- return result;
+ return device_register(&dev->core);
}
EXPORT_SYMBOL_GPL(ps3_vuart_port_device_register);
@@ -963,7 +1098,7 @@
int result;
pr_debug("%s:%d: (%s)\n", __func__, __LINE__, drv->core.name);
- drv->core.bus = &ps3_vuart;
+ drv->core.bus = &ps3_vuart_bus;
result = driver_register(&drv->core);
return result;
}
@@ -976,6 +1111,7 @@
void ps3_vuart_port_driver_unregister(struct ps3_vuart_port_driver *drv)
{
+ pr_debug("%s:%d: (%s)\n", __func__, __LINE__, drv->core.name);
driver_unregister(&drv->core);
}
diff --git a/drivers/ps3/vuart.h b/drivers/ps3/vuart.h
index 2cbf728..1be992d 100644
--- a/drivers/ps3/vuart.h
+++ b/drivers/ps3/vuart.h
@@ -21,6 +21,44 @@
#if !defined(_PS3_VUART_H)
#define _PS3_VUART_H
+#include <asm/ps3.h>
+
+struct ps3_vuart_stats {
+ unsigned long bytes_written;
+ unsigned long bytes_read;
+ unsigned long tx_interrupts;
+ unsigned long rx_interrupts;
+ unsigned long disconnect_interrupts;
+};
+
+struct ps3_vuart_work {
+ struct work_struct work;
+ unsigned long trigger;
+ spinlock_t lock;
+ struct ps3_vuart_port_device* dev; /* to convert work to device */
+};
+
+/**
+ * struct ps3_vuart_port_priv - private vuart device data.
+ */
+
+struct ps3_vuart_port_priv {
+ unsigned int port_number;
+ u64 interrupt_mask;
+
+ struct {
+ spinlock_t lock;
+ struct list_head head;
+ } tx_list;
+ struct {
+ unsigned long bytes_held;
+ spinlock_t lock;
+ struct list_head head;
+ } rx_list;
+ struct ps3_vuart_stats stats;
+ struct ps3_vuart_work work;
+};
+
/**
* struct ps3_vuart_port_driver - a driver for a device on a vuart port
*/
@@ -41,10 +79,6 @@
int ps3_vuart_port_driver_register(struct ps3_vuart_port_driver *drv);
void ps3_vuart_port_driver_unregister(struct ps3_vuart_port_driver *drv);
-int ps3_vuart_write(struct ps3_vuart_port_device *dev,
- const void* buf, unsigned int bytes);
-int ps3_vuart_read(struct ps3_vuart_port_device *dev, void* buf,
- unsigned int bytes);
static inline struct ps3_vuart_port_driver *to_ps3_vuart_port_driver(
struct device_driver *_drv)
{
@@ -55,5 +89,22 @@
{
return container_of(_dev, struct ps3_vuart_port_device, core);
}
+static inline struct ps3_vuart_port_device *ps3_vuart_work_to_port_device(
+ struct work_struct *_work)
+{
+ struct ps3_vuart_work *vw = container_of(_work, struct ps3_vuart_work,
+ work);
+ return vw->dev;
+}
+
+int ps3_vuart_write(struct ps3_vuart_port_device *dev, const void* buf,
+ unsigned int bytes);
+int ps3_vuart_read(struct ps3_vuart_port_device *dev, void* buf,
+ unsigned int bytes);
+int ps3_vuart_read_async(struct ps3_vuart_port_device *dev, work_func_t func,
+ unsigned int bytes);
+void ps3_vuart_cancel_async(struct ps3_vuart_port_device *dev);
+void ps3_vuart_clear_rx_bytes(struct ps3_vuart_port_device *dev,
+ unsigned int bytes);
#endif
diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c
index 8f6b5bf..2b5b8a9 100644
--- a/drivers/scsi/ide-scsi.c
+++ b/drivers/scsi/ide-scsi.c
@@ -801,15 +801,10 @@
{
struct gendisk *disk = inode->i_bdev->bd_disk;
struct ide_scsi_obj *scsi;
- ide_drive_t *drive;
if (!(scsi = ide_scsi_get(disk)))
return -ENXIO;
- drive = scsi->drive;
-
- drive->usage++;
-
return 0;
}
@@ -817,9 +812,6 @@
{
struct gendisk *disk = inode->i_bdev->bd_disk;
struct ide_scsi_obj *scsi = ide_scsi_g(disk);
- ide_drive_t *drive = scsi->drive;
-
- drive->usage--;
ide_scsi_put(scsi);
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 3f048bd..5a8f55f 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -1269,9 +1269,18 @@
/* Some devices return the total number of sectors, not the
* highest sector number. Make the necessary adjustment. */
- if (sdp->fix_capacity)
+ if (sdp->fix_capacity) {
--sdkp->capacity;
+ /* Some devices have version which report the correct sizes
+ * and others which do not. We guess size according to a heuristic
+ * and err on the side of lowering the capacity. */
+ } else {
+ if (sdp->guess_capacity)
+ if (sdkp->capacity & 0x01) /* odd sizes are odd */
+ --sdkp->capacity;
+ }
+
got_data:
if (sector_size == 0) {
sector_size = 512;
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index e8dd71d..ad9f321 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -262,7 +262,8 @@
select SERIAL_CORE
help
This selects the ARM(R) AMBA(R) PrimeCell PL010 UART. If you have
- an Integrator/AP or Integrator/PP2 platform, say Y or M here.
+ an Integrator/AP or Integrator/PP2 platform, or if you have a
+ Cirrus Logic EP93xx CPU, say Y or M here.
If unsure, say N.
diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c
index df45a7a..935f48f 100644
--- a/drivers/serial/atmel_serial.c
+++ b/drivers/serial/atmel_serial.c
@@ -33,12 +33,13 @@
#include <linux/sysrq.h>
#include <linux/tty_flip.h>
#include <linux/platform_device.h>
+#include <linux/atmel_pdc.h>
#include <asm/io.h>
#include <asm/mach/serial_at91.h>
#include <asm/arch/board.h>
-#include <asm/arch/at91_pdc.h>
+
#ifdef CONFIG_ARM
#include <asm/arch/cpu.h>
#include <asm/arch/gpio.h>
diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm2.c b/drivers/serial/cpm_uart/cpm_uart_cpm2.c
index 787a8f1..fa45599 100644
--- a/drivers/serial/cpm_uart/cpm_uart_cpm2.c
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm2.c
@@ -285,7 +285,7 @@
int __init cpm_uart_init_portdesc(void)
{
#if defined(CONFIG_SERIAL_CPM_SMC1) || defined(CONFIG_SERIAL_CPM_SMC2)
- u32 addr;
+ u16 *addr;
#endif
pr_debug("CPM uart[-]:init portdesc\n");
diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index e216dcf..04cc88c 100644
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -154,7 +154,7 @@
{
struct circ_buf *xmit = &sport->port.info->xmit;
- do {
+ while (!(UTS((u32)sport->port.membase) & UTS_TXFULL)) {
/* send xmit->buf[xmit->tail]
* out the port here */
URTX0((u32)sport->port.membase) = xmit->buf[xmit->tail];
@@ -163,7 +163,7 @@
sport->port.icount.tx++;
if (uart_circ_empty(xmit))
break;
- } while (!(UTS((u32)sport->port.membase) & UTS_TXFULL));
+ }
if (uart_circ_empty(xmit))
imx_stop_tx(&sport->port);
@@ -178,8 +178,7 @@
UCR1((u32)sport->port.membase) |= UCR1_TXMPTYEN;
- if(UTS((u32)sport->port.membase) & UTS_TXEMPTY)
- imx_transmit_buffer(sport);
+ imx_transmit_buffer(sport);
}
static irqreturn_t imx_rtsint(int irq, void *dev_id)
@@ -404,7 +403,8 @@
if (retval) goto error_out2;
retval = request_irq(sport->rtsirq, imx_rtsint,
- IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+ (sport->rtsirq < IMX_IRQS) ? 0 :
+ IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
DRIVER_NAME, sport);
if (retval) goto error_out3;
@@ -678,7 +678,7 @@
.mapbase = IMX_UART1_BASE, /* FIXME */
.irq = UART1_MINT_RX,
.uartclk = 16000000,
- .fifosize = 8,
+ .fifosize = 32,
.flags = UPF_BOOT_AUTOCONF,
.ops = &imx_pops,
.line = 0,
@@ -694,7 +694,7 @@
.mapbase = IMX_UART2_BASE, /* FIXME */
.irq = UART2_MINT_RX,
.uartclk = 16000000,
- .fifosize = 8,
+ .fifosize = 32,
.flags = UPF_BOOT_AUTOCONF,
.ops = &imx_pops,
.line = 1,
diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c
index 955bbd6..8d24cd5 100644
--- a/drivers/serial/mpc52xx_uart.c
+++ b/drivers/serial/mpc52xx_uart.c
@@ -995,8 +995,10 @@
struct uart_port *port = dev_get_drvdata(&op->dev);
dev_set_drvdata(&op->dev, NULL);
- if (port)
+ if (port) {
uart_remove_one_port(&mpc52xx_uart_driver, port);
+ irq_dispose_mapping(port->irq);
+ }
return 0;
}
diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c
index c2f1012..6b76bab 100644
--- a/drivers/serial/serial_cs.c
+++ b/drivers/serial/serial_cs.c
@@ -248,6 +248,10 @@
.multi = 2,
}, {
.manfid = MANFID_QUATECH,
+ .prodid = PRODID_QUATECH_DUAL_RS232_G,
+ .multi = 2,
+ }, {
+ .manfid = MANFID_QUATECH,
.prodid = PRODID_QUATECH_QUAD_RS232,
.multi = 4,
}, {
@@ -891,6 +895,7 @@
PCMCIA_DEVICE_PROD_ID12("OEM ", "C288MX ", 0xb572d360, 0xd2385b7a),
PCMCIA_DEVICE_PROD_ID12("PCMCIA ", "C336MX ", 0x99bcafe9, 0xaa25bcab),
PCMCIA_DEVICE_PROD_ID12("Quatech Inc", "PCMCIA Dual RS-232 Serial Port Card", 0xc4420b35, 0x92abc92f),
+ PCMCIA_DEVICE_PROD_ID12("Quatech Inc", "Dual RS-232 Serial Port PC Card", 0xc4420b35, 0x031a380d),
PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "PCMCIA", "EN2218-LAN/MODEM", 0x281f1c5d, 0x570f348e, "PCMLM28.cis"),
PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "PCMCIA", "UE2218-LAN/MODEM", 0x281f1c5d, 0x6fdcacee, "PCMLM28.cis"),
PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet", 0xf5f025c2, 0x338e8155, "PCMLM28.cis"),
diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
index 825bf88..8b7ff46 100644
--- a/drivers/usb/Makefile
+++ b/drivers/usb/Makefile
@@ -51,6 +51,7 @@
obj-$(CONFIG_USB_ADUTUX) += misc/
obj-$(CONFIG_USB_APPLEDISPLAY) += misc/
obj-$(CONFIG_USB_AUERSWALD) += misc/
+obj-$(CONFIG_USB_BERRY_CHARGE) += misc/
obj-$(CONFIG_USB_CYPRESS_CY7C63)+= misc/
obj-$(CONFIG_USB_CYTHERM) += misc/
obj-$(CONFIG_USB_EMI26) += misc/
diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c
index dae4ef1..4973e14 100644
--- a/drivers/usb/atm/ueagle-atm.c
+++ b/drivers/usb/atm/ueagle-atm.c
@@ -61,6 +61,7 @@
#include <linux/usb.h>
#include <linux/firmware.h>
#include <linux/ctype.h>
+#include <linux/sched.h>
#include <linux/kthread.h>
#include <linux/version.h>
#include <linux/mutex.h>
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 9819962..d38a25f 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -326,10 +326,16 @@
struct tty_struct *tty = acm->tty;
struct acm_ru *rcv;
unsigned long flags;
- int i = 0;
+ unsigned char throttled;
dbg("Entering acm_rx_tasklet");
- if (!ACM_READY(acm) || acm->throttle)
+ if (!ACM_READY(acm))
+ return;
+
+ spin_lock(&acm->throttle_lock);
+ throttled = acm->throttle;
+ spin_unlock(&acm->throttle_lock);
+ if (throttled)
return;
next_buffer:
@@ -346,22 +352,20 @@
dbg("acm_rx_tasklet: procesing buf 0x%p, size = %d", buf, buf->size);
tty_buffer_request_room(tty, buf->size);
- if (!acm->throttle)
+ spin_lock(&acm->throttle_lock);
+ throttled = acm->throttle;
+ spin_unlock(&acm->throttle_lock);
+ if (!throttled)
tty_insert_flip_string(tty, buf->base, buf->size);
tty_flip_buffer_push(tty);
- spin_lock(&acm->throttle_lock);
- if (acm->throttle) {
- dbg("Throtteling noticed");
- memmove(buf->base, buf->base + i, buf->size - i);
- buf->size -= i;
- spin_unlock(&acm->throttle_lock);
+ if (throttled) {
+ dbg("Throttling noticed");
spin_lock_irqsave(&acm->read_lock, flags);
list_add(&buf->list, &acm->filled_read_bufs);
spin_unlock_irqrestore(&acm->read_lock, flags);
return;
}
- spin_unlock(&acm->throttle_lock);
spin_lock_irqsave(&acm->read_lock, flags);
list_add(&buf->list, &acm->spare_read_bufs);
@@ -467,7 +471,8 @@
goto bail_out;
}
- if (0 > acm_set_control(acm, acm->ctrlout = ACM_CTRL_DTR | ACM_CTRL_RTS))
+ if (0 > acm_set_control(acm, acm->ctrlout = ACM_CTRL_DTR | ACM_CTRL_RTS) &&
+ (acm->ctrl_caps & USB_CDC_CAP_LINE))
goto full_bailout;
INIT_LIST_HEAD(&acm->spare_read_urbs);
@@ -480,6 +485,8 @@
list_add(&(acm->rb[i].list), &acm->spare_read_bufs);
}
+ acm->throttle = 0;
+
tasklet_schedule(&acm->urb_task);
done:
@@ -1092,6 +1099,10 @@
{ USB_DEVICE(0x0ace, 0x1611), /* ZyDAS 56K USB MODEM - new version */
.driver_info = SINGLE_RX_URB, /* firmware bug */
},
+ { USB_DEVICE(0x22b8, 0x7000), /* Motorola Q Phone */
+ .driver_info = NO_UNION_NORMAL, /* has no union descriptor */
+ },
+
/* control interfaces with various AT-command sets */
{ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM,
USB_CDC_ACM_PROTO_AT_V25TER) },
diff --git a/drivers/usb/core/devices.c b/drivers/usb/core/devices.c
index a47c30b..aefc798 100644
--- a/drivers/usb/core/devices.c
+++ b/drivers/usb/core/devices.c
@@ -604,10 +604,6 @@
lock_kernel();
if (!st) {
st = kmalloc(sizeof(struct usb_device_status), GFP_KERNEL);
- if (!st) {
- unlock_kernel();
- return POLLIN;
- }
/* we may have dropped BKL - need to check for having lost the race */
if (file->private_data) {
@@ -615,6 +611,11 @@
st = file->private_data;
goto lost_race;
}
+ /* we haven't lost - check for allocation failure now */
+ if (!st) {
+ unlock_kernel();
+ return POLLIN;
+ }
/*
* need to prevent the module from being unloaded, since
diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index 2087766..274f14f 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -857,11 +857,11 @@
static int proc_setconfig(struct dev_state *ps, void __user *arg)
{
- unsigned int u;
+ int u;
int status = 0;
struct usb_host_config *actconfig;
- if (get_user(u, (unsigned int __user *)arg))
+ if (get_user(u, (int __user *)arg))
return -EFAULT;
actconfig = ps->dev->actconfig;
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index 600d1bc..2aded26 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -743,6 +743,7 @@
* usb_register_driver - register a USB interface driver
* @new_driver: USB operations for the interface driver
* @owner: module owner of this driver.
+ * @mod_name: module name string
*
* Registers a USB interface driver with the USB core. The list of
* unattached interfaces will be rescanned whenever a new driver is
diff --git a/drivers/usb/core/endpoint.c b/drivers/usb/core/endpoint.c
index 5e628ae..e0ec704 100644
--- a/drivers/usb/core/endpoint.c
+++ b/drivers/usb/core/endpoint.c
@@ -229,7 +229,7 @@
kref_init(&ep_class->kref);
ep_class->class = class_create(THIS_MODULE, "usb_endpoint");
if (IS_ERR(ep_class->class)) {
- result = IS_ERR(ep_class->class);
+ result = PTR_ERR(ep_class->class);
goto class_create_error;
}
diff --git a/drivers/usb/core/generic.c b/drivers/usb/core/generic.c
index b531a4f..9bbcb20 100644
--- a/drivers/usb/core/generic.c
+++ b/drivers/usb/core/generic.c
@@ -184,7 +184,7 @@
/* if this is only an unbind, not a physical disconnect, then
* unconfigure the device */
if (udev->actconfig)
- usb_set_configuration(udev, 0);
+ usb_set_configuration(udev, -1);
usb_remove_sysfs_dev_files(udev);
}
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 590ec82..50c0db1 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -44,6 +44,7 @@
struct usb_hub_status hub;
struct usb_port_status port;
} *status; /* buffer for status reports */
+ struct mutex status_mutex; /* for the status buffer */
int error; /* last reported error */
int nerrors; /* track consecutive errors */
@@ -535,6 +536,7 @@
{
int ret;
+ mutex_lock(&hub->status_mutex);
ret = get_hub_status(hub->hdev, &hub->status->hub);
if (ret < 0)
dev_err (hub->intfdev,
@@ -544,6 +546,7 @@
*change = le16_to_cpu(hub->status->hub.wHubChange);
ret = 0;
}
+ mutex_unlock(&hub->status_mutex);
return ret;
}
@@ -617,6 +620,7 @@
ret = -ENOMEM;
goto fail;
}
+ mutex_init(&hub->status_mutex);
hub->descriptor = kmalloc(sizeof(*hub->descriptor), GFP_KERNEL);
if (!hub->descriptor) {
@@ -1396,6 +1400,7 @@
{
int ret;
+ mutex_lock(&hub->status_mutex);
ret = get_port_status(hub->hdev, port1, &hub->status->port);
if (ret < 4) {
dev_err (hub->intfdev,
@@ -1407,6 +1412,7 @@
*change = le16_to_cpu(hub->status->port.wPortChange);
ret = 0;
}
+ mutex_unlock(&hub->status_mutex);
return ret;
}
@@ -1904,6 +1910,7 @@
struct usb_hub *hub = usb_get_intfdata (intf);
struct usb_device *hdev = hub->hdev;
unsigned port1;
+ int status = 0;
/* fail if children aren't already suspended */
for (port1 = 1; port1 <= hdev->maxchild; port1++) {
@@ -1927,24 +1934,18 @@
dev_dbg(&intf->dev, "%s\n", __FUNCTION__);
- /* "global suspend" of the downstream HC-to-USB interface */
- if (!hdev->parent) {
- struct usb_bus *bus = hdev->bus;
- if (bus) {
- int status = hcd_bus_suspend (bus);
-
- if (status != 0) {
- dev_dbg(&hdev->dev, "'global' suspend %d\n",
- status);
- return status;
- }
- } else
- return -EOPNOTSUPP;
- }
-
/* stop khubd and related activity */
hub_quiesce(hub);
- return 0;
+
+ /* "global suspend" of the downstream HC-to-USB interface */
+ if (!hdev->parent) {
+ status = hcd_bus_suspend(hdev->bus);
+ if (status != 0) {
+ dev_dbg(&hdev->dev, "'global' suspend %d\n", status);
+ hub_activate(hub);
+ }
+ }
+ return status;
}
static int hub_resume(struct usb_interface *intf)
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index 8aca357..74edaea 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -1316,6 +1316,14 @@
* use this kind of configurability; many devices only have one
* configuration.
*
+ * @configuration is the value of the configuration to be installed.
+ * According to the USB spec (e.g. section 9.1.1.5), configuration values
+ * must be non-zero; a value of zero indicates that the device in
+ * unconfigured. However some devices erroneously use 0 as one of their
+ * configuration values. To help manage such devices, this routine will
+ * accept @configuration = -1 as indicating the device should be put in
+ * an unconfigured state.
+ *
* USB device configurations may affect Linux interoperability,
* power consumption and the functionality available. For example,
* the default configuration is limited to using 100mA of bus power,
@@ -1347,10 +1355,15 @@
struct usb_interface **new_interfaces = NULL;
int n, nintf;
- for (i = 0; i < dev->descriptor.bNumConfigurations; i++) {
- if (dev->config[i].desc.bConfigurationValue == configuration) {
- cp = &dev->config[i];
- break;
+ if (configuration == -1)
+ configuration = 0;
+ else {
+ for (i = 0; i < dev->descriptor.bNumConfigurations; i++) {
+ if (dev->config[i].desc.bConfigurationValue ==
+ configuration) {
+ cp = &dev->config[i];
+ break;
+ }
}
}
if ((!cp && configuration != 0))
@@ -1359,6 +1372,7 @@
/* The USB spec says configuration 0 means unconfigured.
* But if a device includes a configuration numbered 0,
* we will accept it as a correctly configured state.
+ * Use -1 if you really want to unconfigure the device.
*/
if (cp && configuration == 0)
dev_warn(&dev->dev, "config 0 descriptor??\n");
diff --git a/drivers/usb/core/otg_whitelist.h b/drivers/usb/core/otg_whitelist.h
index 627a5a2..7f31a49 100644
--- a/drivers/usb/core/otg_whitelist.h
+++ b/drivers/usb/core/otg_whitelist.h
@@ -31,7 +31,7 @@
{ USB_DEVICE_INFO(7, 1, 3) },
#endif
-#ifdef CONFIG_USB_CDCETHER
+#ifdef CONFIG_USB_NET_CDCETHER
/* Linux-USB CDC Ethernet gadget */
{ USB_DEVICE(0x0525, 0xa4a1), },
/* Linux-USB CDC Ethernet + RNDIS gadget */
diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c
index 4eaa0ee..0edfbaf 100644
--- a/drivers/usb/core/sysfs.c
+++ b/drivers/usb/core/sysfs.c
@@ -63,7 +63,7 @@
struct usb_device *udev = to_usb_device(dev);
int config, value;
- if (sscanf(buf, "%u", &config) != 1 || config > 255)
+ if (sscanf(buf, "%d", &config) != 1 || config < -1 || config > 255)
return -EINVAL;
usb_lock_device(udev);
value = usb_set_configuration(udev, config);
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index 36b36e0..a467780 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -784,7 +784,7 @@
return status;
}
-static struct usb_ep_ops at91_ep_ops = {
+static const struct usb_ep_ops at91_ep_ops = {
.enable = at91_ep_enable,
.disable = at91_ep_disable,
.alloc_request = at91_ep_alloc_request,
@@ -912,7 +912,7 @@
at91_udp_write(udc, AT91_UDP_TXVC, 0);
if (cpu_is_at91rm9200())
at91_set_gpio_value(udc->board.pullup_pin, 1);
- else if (cpu_is_at91sam9260()) {
+ else if (cpu_is_at91sam9260() || cpu_is_at91sam9263()) {
u32 txvc = at91_udp_read(udc, AT91_UDP_TXVC);
txvc |= AT91_UDP_TXVC_PUON;
@@ -929,7 +929,7 @@
at91_udp_write(udc, AT91_UDP_TXVC, AT91_UDP_TXVC_TXVDIS);
if (cpu_is_at91rm9200())
at91_set_gpio_value(udc->board.pullup_pin, 0);
- else if (cpu_is_at91sam9260()) {
+ else if (cpu_is_at91sam9260() || cpu_is_at91sam9263()) {
u32 txvc = at91_udp_read(udc, AT91_UDP_TXVC);
txvc &= ~AT91_UDP_TXVC_PUON;
@@ -1651,7 +1651,7 @@
pullup(platform_get_drvdata(dev), 0);
}
-static int __devinit at91udc_probe(struct platform_device *pdev)
+static int __init at91udc_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct at91_udc *udc;
@@ -1762,7 +1762,7 @@
return retval;
}
-static int __devexit at91udc_remove(struct platform_device *pdev)
+static int __exit at91udc_remove(struct platform_device *pdev)
{
struct at91_udc *udc = platform_get_drvdata(pdev);
struct resource *res;
@@ -1836,8 +1836,7 @@
#endif
static struct platform_driver at91_udc = {
- .probe = at91udc_probe,
- .remove = __devexit_p(at91udc_remove),
+ .remove = __exit_p(at91udc_remove),
.shutdown = at91udc_shutdown,
.suspend = at91udc_suspend,
.resume = at91udc_resume,
@@ -1847,13 +1846,13 @@
},
};
-static int __devinit udc_init_module(void)
+static int __init udc_init_module(void)
{
- return platform_driver_register(&at91_udc);
+ return platform_driver_probe(&at91_udc, at91udc_probe);
}
module_init(udc_init_module);
-static void __devexit udc_exit_module(void)
+static void __exit udc_exit_module(void)
{
platform_driver_unregister(&at91_udc);
}
diff --git a/drivers/usb/gadget/pxa2xx_udc.c b/drivers/usb/gadget/pxa2xx_udc.c
index 27904a5..f01890d 100644
--- a/drivers/usb/gadget/pxa2xx_udc.c
+++ b/drivers/usb/gadget/pxa2xx_udc.c
@@ -155,7 +155,7 @@
struct pxa2xx_udc_mach_info *mach = the_controller->mach;
if (mach->gpio_vbus)
- return pxa_gpio_get(mach->gpio_vbus);
+ return udc_gpio_get(mach->gpio_vbus);
if (mach->udc_is_connected)
return mach->udc_is_connected();
return 1;
@@ -167,7 +167,7 @@
struct pxa2xx_udc_mach_info *mach = the_controller->mach;
if (mach->gpio_pullup)
- pxa_gpio_set(mach->gpio_pullup, 0);
+ udc_gpio_set(mach->gpio_pullup, 0);
else if (mach->udc_command)
mach->udc_command(PXA2XX_UDC_CMD_DISCONNECT);
}
@@ -177,7 +177,7 @@
struct pxa2xx_udc_mach_info *mach = the_controller->mach;
if (mach->gpio_pullup)
- pxa_gpio_set(mach->gpio_pullup, 1);
+ udc_gpio_set(mach->gpio_pullup, 1);
else if (mach->udc_command)
mach->udc_command(PXA2XX_UDC_CMD_CONNECT);
}
@@ -1755,7 +1755,7 @@
static irqreturn_t udc_vbus_irq(int irq, void *_dev)
{
struct pxa2xx_udc *dev = _dev;
- int vbus = pxa_gpio_get(dev->mach->gpio_vbus);
+ int vbus = udc_gpio_get(dev->mach->gpio_vbus);
pxa2xx_udc_vbus_session(&dev->gadget, vbus);
return IRQ_HANDLED;
@@ -2545,15 +2545,13 @@
dev->dev = &pdev->dev;
dev->mach = pdev->dev.platform_data;
if (dev->mach->gpio_vbus) {
- vbus_irq = IRQ_GPIO(dev->mach->gpio_vbus & GPIO_MD_MASK_NR);
- pxa_gpio_mode((dev->mach->gpio_vbus & GPIO_MD_MASK_NR)
- | GPIO_IN);
+ udc_gpio_init_vbus(dev->mach->gpio_vbus);
+ vbus_irq = udc_gpio_to_irq(dev->mach->gpio_vbus);
set_irq_type(vbus_irq, IRQT_BOTHEDGE);
} else
vbus_irq = 0;
if (dev->mach->gpio_pullup)
- pxa_gpio_mode((dev->mach->gpio_pullup & GPIO_MD_MASK_NR)
- | GPIO_OUT | GPIO_DFLT_LOW);
+ udc_gpio_init_pullup(dev->mach->gpio_pullup);
init_timer(&dev->timer);
dev->timer.function = udc_watchdog;
diff --git a/drivers/usb/gadget/pxa2xx_udc.h b/drivers/usb/gadget/pxa2xx_udc.h
index 8e598c8..773e549 100644
--- a/drivers/usb/gadget/pxa2xx_udc.h
+++ b/drivers/usb/gadget/pxa2xx_udc.h
@@ -177,21 +177,6 @@
static struct pxa2xx_udc *the_controller;
-static inline int pxa_gpio_get(unsigned gpio)
-{
- return (GPLR(gpio) & GPIO_bit(gpio)) != 0;
-}
-
-static inline void pxa_gpio_set(unsigned gpio, int is_on)
-{
- int mask = GPIO_bit(gpio);
-
- if (is_on)
- GPSR(gpio) = mask;
- else
- GPCR(gpio) = mask;
-}
-
/*-------------------------------------------------------------------------*/
/*
diff --git a/drivers/usb/gadget/serial.c b/drivers/usb/gadget/serial.c
index e6c19aa..e552668 100644
--- a/drivers/usb/gadget/serial.c
+++ b/drivers/usb/gadget/serial.c
@@ -1699,6 +1699,7 @@
memcpy(&port->port_line_coding, req->buf, ret);
spin_unlock(&port->port_lock);
}
+ ret = 0;
break;
case USB_CDC_REQ_GET_LINE_CODING:
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 185721d..a740564 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -42,6 +42,9 @@
#include <asm/irq.h>
#include <asm/system.h>
#include <asm/unaligned.h>
+#ifdef CONFIG_PPC_PS3
+#include <asm/firmware.h>
+#endif
/*-------------------------------------------------------------------------*/
@@ -299,6 +302,19 @@
spin_unlock_irqrestore (&ehci->lock, flags);
}
+/* On some systems, leaving remote wakeup enabled prevents system shutdown.
+ * The firmware seems to think that powering off is a wakeup event!
+ * This routine turns off remote wakeup and everything else, on all ports.
+ */
+static void ehci_turn_off_all_ports(struct ehci_hcd *ehci)
+{
+ int port = HCS_N_PORTS(ehci->hcs_params);
+
+ while (port--)
+ ehci_writel(ehci, PORT_RWC_BITS,
+ &ehci->regs->port_status[port]);
+}
+
/* ehci_shutdown kick in for silicon on any bus (not just pci, etc).
* This forcibly disables dma and IRQs, helping kexec and other cases
* where the next system software may expect clean state.
@@ -310,9 +326,13 @@
ehci = hcd_to_ehci (hcd);
(void) ehci_halt (ehci);
+ ehci_turn_off_all_ports(ehci);
/* make BIOS/etc use companion controller during reboot */
ehci_writel(ehci, 0, &ehci->regs->configured_flag);
+
+ /* unblock posted writes */
+ ehci_readl(ehci, &ehci->regs->configured_flag);
}
static void ehci_port_power (struct ehci_hcd *ehci, int is_on)
@@ -951,15 +971,18 @@
#endif
#ifdef PS3_SYSTEM_BUS_DRIVER
- retval = ps3_system_bus_driver_register(&PS3_SYSTEM_BUS_DRIVER);
- if (retval < 0) {
+ if (firmware_has_feature(FW_FEATURE_PS3_LV1)) {
+ retval = ps3_system_bus_driver_register(
+ &PS3_SYSTEM_BUS_DRIVER);
+ if (retval < 0) {
#ifdef PLATFORM_DRIVER
- platform_driver_unregister(&PLATFORM_DRIVER);
+ platform_driver_unregister(&PLATFORM_DRIVER);
#endif
#ifdef PCI_DRIVER
- pci_unregister_driver(&PCI_DRIVER);
+ pci_unregister_driver(&PCI_DRIVER);
#endif
- return retval;
+ return retval;
+ }
}
#endif
@@ -976,7 +999,8 @@
pci_unregister_driver(&PCI_DRIVER);
#endif
#ifdef PS3_SYSTEM_BUS_DRIVER
- ps3_system_bus_driver_unregister(&PS3_SYSTEM_BUS_DRIVER);
+ if (firmware_has_feature(FW_FEATURE_PS3_LV1))
+ ps3_system_bus_driver_unregister(&PS3_SYSTEM_BUS_DRIVER);
#endif
}
module_exit(ehci_hcd_cleanup);
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index 0d83c6d..9af529d 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -36,6 +36,8 @@
int port;
int mask;
+ ehci_dbg(ehci, "suspend root hub\n");
+
if (time_before (jiffies, ehci->next_statechange))
msleep(5);
diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c
index 2718b5d..46873f2 100644
--- a/drivers/usb/host/isp116x-hcd.c
+++ b/drivers/usb/host/isp116x-hcd.c
@@ -1577,7 +1577,7 @@
#define resource_len(r) (((r)->end - (r)->start) + 1)
-static int __init isp116x_probe(struct platform_device *pdev)
+static int __devinit isp116x_probe(struct platform_device *pdev)
{
struct usb_hcd *hcd;
struct isp116x *isp116x;
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index 9303464..d849c80 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -18,19 +18,38 @@
#include <asm/mach-types.h>
#include <asm/hardware.h>
#include <asm/arch/board.h>
+#include <asm/arch/cpu.h>
#ifndef CONFIG_ARCH_AT91
#error "CONFIG_ARCH_AT91 must be defined."
#endif
-/* interface and function clocks */
-static struct clk *iclk, *fclk;
+/* interface and function clocks; sometimes also an AHB clock */
+static struct clk *iclk, *fclk, *hclk;
static int clocked;
extern int usb_disabled(void);
/*-------------------------------------------------------------------------*/
+static void at91_start_clock(void)
+{
+ if (cpu_is_at91sam9261())
+ clk_enable(hclk);
+ clk_enable(iclk);
+ clk_enable(fclk);
+ clocked = 1;
+}
+
+static void at91_stop_clock(void)
+{
+ clk_disable(fclk);
+ clk_disable(iclk);
+ if (cpu_is_at91sam9261())
+ clk_disable(hclk);
+ clocked = 0;
+}
+
static void at91_start_hc(struct platform_device *pdev)
{
struct usb_hcd *hcd = platform_get_drvdata(pdev);
@@ -41,9 +60,7 @@
/*
* Start the USB clocks.
*/
- clk_enable(iclk);
- clk_enable(fclk);
- clocked = 1;
+ at91_start_clock();
/*
* The USB host controller must remain in reset.
@@ -66,9 +83,7 @@
/*
* Stop the USB clocks.
*/
- clk_disable(fclk);
- clk_disable(iclk);
- clocked = 0;
+ at91_stop_clock();
}
@@ -126,6 +141,8 @@
iclk = clk_get(&pdev->dev, "ohci_clk");
fclk = clk_get(&pdev->dev, "uhpck");
+ if (cpu_is_at91sam9261())
+ hclk = clk_get(&pdev->dev, "hck0");
at91_start_hc(pdev);
ohci_hcd_init(hcd_to_ohci(hcd));
@@ -137,6 +154,8 @@
/* Error handling */
at91_stop_hc(pdev);
+ if (cpu_is_at91sam9261())
+ clk_put(hclk);
clk_put(fclk);
clk_put(iclk);
@@ -171,9 +190,11 @@
iounmap(hcd->regs);
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+ if (cpu_is_at91sam9261())
+ clk_put(hclk);
clk_put(fclk);
clk_put(iclk);
- fclk = iclk = NULL;
+ fclk = iclk = hclk = NULL;
dev_set_drvdata(&pdev->dev, NULL);
return 0;
@@ -280,9 +301,7 @@
*/
if (at91_suspend_entering_slow_clock()) {
ohci_usb_reset (ohci);
- clk_disable(fclk);
- clk_disable(iclk);
- clocked = 0;
+ at91_stop_clock();
}
return 0;
@@ -295,11 +314,8 @@
if (device_may_wakeup(&pdev->dev))
disable_irq_wake(hcd->irq);
- if (!clocked) {
- clk_enable(iclk);
- clk_enable(fclk);
- clocked = 1;
- }
+ if (!clocked)
+ at91_start_clock();
return 0;
}
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index fa6a7ce..f0d29ed 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -42,6 +42,9 @@
#include <asm/system.h>
#include <asm/unaligned.h>
#include <asm/byteorder.h>
+#ifdef CONFIG_PPC_PS3
+#include <asm/firmware.h>
+#endif
#include "../core/hcd.h"
@@ -944,9 +947,12 @@
sizeof (struct ed), sizeof (struct td));
#ifdef PS3_SYSTEM_BUS_DRIVER
- retval = ps3_system_bus_driver_register(&PS3_SYSTEM_BUS_DRIVER);
- if (retval < 0)
- goto error_ps3;
+ if (firmware_has_feature(FW_FEATURE_PS3_LV1)) {
+ retval = ps3_system_bus_driver_register(
+ &PS3_SYSTEM_BUS_DRIVER);
+ if (retval < 0)
+ goto error_ps3;
+ }
#endif
#ifdef PLATFORM_DRIVER
@@ -992,7 +998,8 @@
error_platform:
#endif
#ifdef PS3_SYSTEM_BUS_DRIVER
- ps3_system_bus_driver_unregister(&PS3_SYSTEM_BUS_DRIVER);
+ if (firmware_has_feature(FW_FEATURE_PS3_LV1))
+ ps3_system_bus_driver_unregister(&PS3_SYSTEM_BUS_DRIVER);
error_ps3:
#endif
return retval;
@@ -1014,7 +1021,8 @@
platform_driver_unregister(&PLATFORM_DRIVER);
#endif
#ifdef PS3_SYSTEM_BUS_DRIVER
- ps3_system_bus_driver_unregister(&PS3_SYSTEM_BUS_DRIVER);
+ if (firmware_has_feature(FW_FEATURE_PS3_LV1))
+ ps3_system_bus_driver_unregister(&PS3_SYSTEM_BUS_DRIVER);
#endif
}
module_exit(ohci_hcd_mod_exit);
diff --git a/drivers/usb/input/hid-core.c b/drivers/usb/input/hid-core.c
index 4d8ed3d..ef09952 100644
--- a/drivers/usb/input/hid-core.c
+++ b/drivers/usb/input/hid-core.c
@@ -515,6 +515,7 @@
#define USB_VENDOR_ID_TURBOX 0x062a
#define USB_DEVICE_ID_TURBOX_KEYBOARD 0x0201
+#define USB_VENDOR_ID_CIDC 0x1677
/*
* Initialize all reports
@@ -548,7 +549,6 @@
}
#define USB_VENDOR_ID_GTCO 0x078c
-#define USB_VENDOR_ID_GTCO_IPANEL_2 0x5543
#define USB_DEVICE_ID_GTCO_90 0x0090
#define USB_DEVICE_ID_GTCO_100 0x0100
#define USB_DEVICE_ID_GTCO_101 0x0101
@@ -594,8 +594,6 @@
#define USB_DEVICE_ID_GTCO_1004 0x1004
#define USB_DEVICE_ID_GTCO_1005 0x1005
#define USB_DEVICE_ID_GTCO_1006 0x1006
-#define USB_DEVICE_ID_GTCO_8 0x0008
-#define USB_DEVICE_ID_GTCO_d 0x000d
#define USB_VENDOR_ID_WACOM 0x056a
@@ -854,8 +852,6 @@
{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_1004, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_1005, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_1006, HID_QUIRK_IGNORE },
- { USB_VENDOR_ID_GTCO_IPANEL_2, USB_DEVICE_ID_GTCO_8, HID_QUIRK_IGNORE },
- { USB_VENDOR_ID_GTCO_IPANEL_2, USB_DEVICE_ID_GTCO_d, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_IMATION, USB_DEVICE_ID_DISC_STAKKA, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_KBGEAR, USB_DEVICE_ID_KBGEAR_JAMSTUDIO, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_CASSY, HID_QUIRK_IGNORE },
@@ -953,6 +949,8 @@
{ USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER, HID_QUIRK_SONY_PS3_CONTROLLER },
+ { USB_VENDOR_ID_CIDC, 0x0103, HID_QUIRK_IGNORE },
+
{ 0, 0 }
};
diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig
index a74bf86..4907e8b 100644
--- a/drivers/usb/misc/Kconfig
+++ b/drivers/usb/misc/Kconfig
@@ -88,6 +88,17 @@
To compile this driver as a module, choose M here: the
module will be called usblcd.
+config USB_BERRY_CHARGE
+ tristate "USB BlackBerry recharge support"
+ depends on USB
+ help
+ Say Y here if you want to connect a BlackBerry device to your
+ computer's USB port and have it automatically switch to "recharge"
+ mode.
+
+ To compile this driver as a module, choose M here: the
+ module will be called berry_charge.
+
config USB_LED
tristate "USB LED driver support"
depends on USB
diff --git a/drivers/usb/misc/Makefile b/drivers/usb/misc/Makefile
index 2cba07d..dac2d5b 100644
--- a/drivers/usb/misc/Makefile
+++ b/drivers/usb/misc/Makefile
@@ -6,6 +6,7 @@
obj-$(CONFIG_USB_ADUTUX) += adutux.o
obj-$(CONFIG_USB_APPLEDISPLAY) += appledisplay.o
obj-$(CONFIG_USB_AUERSWALD) += auerswald.o
+obj-$(CONFIG_USB_BERRY_CHARGE) += berry_charge.o
obj-$(CONFIG_USB_CYPRESS_CY7C63)+= cypress_cy7c63.o
obj-$(CONFIG_USB_CYTHERM) += cytherm.o
obj-$(CONFIG_USB_EMI26) += emi26.o
diff --git a/drivers/usb/misc/appledisplay.c b/drivers/usb/misc/appledisplay.c
index 32f0e3a..e573c8b 100644
--- a/drivers/usb/misc/appledisplay.c
+++ b/drivers/usb/misc/appledisplay.c
@@ -281,8 +281,8 @@
/* Register backlight device */
snprintf(bl_name, sizeof(bl_name), "appledisplay%d",
atomic_inc_return(&count_displays) - 1);
- pdata->bd = backlight_device_register(bl_name, NULL,
- pdata, &appledisplay_bl_data);
+ pdata->bd = backlight_device_register(bl_name, NULL, pdata,
+ &appledisplay_bl_data);
if (IS_ERR(pdata->bd)) {
err("appledisplay: Backlight registration failed");
goto error;
diff --git a/drivers/usb/misc/berry_charge.c b/drivers/usb/misc/berry_charge.c
new file mode 100644
index 0000000..60893c6
--- /dev/null
+++ b/drivers/usb/misc/berry_charge.c
@@ -0,0 +1,140 @@
+/*
+ * USB BlackBerry charging module
+ *
+ * Copyright (C) 2007 Greg Kroah-Hartman <gregkh@suse.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2.
+ *
+ * Information on how to switch configs was taken by the bcharge.cc file
+ * created by the barry.sf.net project.
+ *
+ * bcharge.cc has the following copyright:
+ * Copyright (C) 2006, Net Direct Inc. (http://www.netdirect.ca/)
+ * and is released under the GPLv2.
+ *
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+
+#define RIM_VENDOR 0x0fca
+#define BLACKBERRY 0x0001
+
+static int debug;
+
+#ifdef dbg
+#undef dbg
+#endif
+#define dbg(dev, format, arg...) \
+ if (debug) \
+ dev_printk(KERN_DEBUG , dev , format , ## arg)
+
+static struct usb_device_id id_table [] = {
+ { USB_DEVICE(RIM_VENDOR, BLACKBERRY) },
+ { }, /* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+static int magic_charge(struct usb_device *udev)
+{
+ char *dummy_buffer = kzalloc(2, GFP_KERNEL);
+ int retval;
+
+ if (!dummy_buffer)
+ return -ENOMEM;
+
+ /* send two magic commands and then set the configuration. The device
+ * will then reset itself with the new power usage and should start
+ * charging. */
+
+ /* Note, with testing, it only seems that the first message is really
+ * needed (at least for the 8700c), but to be safe, we emulate what
+ * other operating systems seem to be sending to their device. We
+ * really need to get some specs for this device to be sure about what
+ * is going on here.
+ */
+ dbg(&udev->dev, "Sending first magic command\n");
+ retval = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
+ 0xa5, 0xc0, 0, 1, dummy_buffer, 2, 100);
+ if (retval != 2) {
+ dev_err(&udev->dev, "First magic command failed: %d.\n",
+ retval);
+ return retval;
+ }
+
+ dbg(&udev->dev, "Sending first magic command\n");
+ retval = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
+ 0xa2, 0x40, 0, 1, dummy_buffer, 0, 100);
+ if (retval != 0) {
+ dev_err(&udev->dev, "Second magic command failed: %d.\n",
+ retval);
+ return retval;
+ }
+
+ dbg(&udev->dev, "Calling set_configuration\n");
+ retval = usb_driver_set_configuration(udev, 1);
+ if (retval)
+ dev_err(&udev->dev, "Set Configuration failed :%d.\n", retval);
+
+ return retval;
+}
+
+static int berry_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ struct usb_device *udev = interface_to_usbdev(intf);
+
+ dbg(&udev->dev, "Power is set to %dmA\n",
+ udev->actconfig->desc.bMaxPower * 2);
+
+ /* check the power usage so we don't try to enable something that is
+ * already enabled */
+ if ((udev->actconfig->desc.bMaxPower * 2) == 500) {
+ dbg(&udev->dev, "device is already charging, power is "
+ "set to %dmA\n", udev->actconfig->desc.bMaxPower * 2);
+ return -ENODEV;
+ }
+
+ /* turn the power on */
+ magic_charge(udev);
+
+ /* we don't really want to bind to the device, userspace programs can
+ * handle the syncing just fine, so get outta here. */
+ return -ENODEV;
+}
+
+static void berry_disconnect(struct usb_interface *intf)
+{
+}
+
+static struct usb_driver berry_driver = {
+ .name = "berry_charge",
+ .probe = berry_probe,
+ .disconnect = berry_disconnect,
+ .id_table = id_table,
+};
+
+static int __init berry_init(void)
+{
+ return usb_register(&berry_driver);
+}
+
+static void __exit berry_exit(void)
+{
+ usb_deregister(&berry_driver);
+}
+
+module_init(berry_init);
+module_exit(berry_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Greg Kroah-Hartman <gregkh@suse.de>");
+module_param(debug, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Debug enabled or not");
diff --git a/drivers/usb/net/Kconfig b/drivers/usb/net/Kconfig
index a2b94ef5..0f3d7db 100644
--- a/drivers/usb/net/Kconfig
+++ b/drivers/usb/net/Kconfig
@@ -84,6 +84,7 @@
config USB_RTL8150
tristate "USB RTL8150 based ethernet device support (EXPERIMENTAL)"
depends on EXPERIMENTAL
+ select MII
help
Say Y here if you have RTL8150 based usb-ethernet adapter.
Send me <petkan@users.sourceforge.net> any comments you may have.
@@ -98,7 +99,7 @@
config USB_USBNET
tristate "Multi-purpose USB Networking Framework"
- select MII if USBNET_MII != n
+ select MII if USB_USBNET_MII != n
---help---
This driver supports several kinds of network links over USB,
with "minidrivers" built around a common network driver core
@@ -239,6 +240,7 @@
config USB_NET_CDC_SUBSET
tristate "Simple USB Network Links (CDC Ethernet subset)"
depends on USB_USBNET
+ default y
help
This driver module supports USB network devices that can work
without any device-specific information. Select it if you have
@@ -298,6 +300,13 @@
Choose this option to support the usb networking links used
by some sample firmware from Epson.
+config USB_KC2190
+ boolean "KT Technology KC2190 based cables (InstaNet)"
+ depends on USB_NET_CDC_SUBSET && EXPERIMENTAL
+ help
+ Choose this option if you're using a host-to-host cable
+ with one of these chips.
+
config USB_NET_ZAURUS
tristate "Sharp Zaurus (stock ROMs) and compatible"
depends on USB_USBNET
diff --git a/drivers/usb/net/asix.c b/drivers/usb/net/asix.c
index bd357e1..7ef2e4b 100644
--- a/drivers/usb/net/asix.c
+++ b/drivers/usb/net/asix.c
@@ -351,9 +351,11 @@
skb_push(skb, 4);
packet_len = (((skb->len - 4) ^ 0x0000ffff) << 16) + (skb->len - 4);
+ cpu_to_le32s(&packet_len);
memcpy(skb->data, &packet_len, sizeof(packet_len));
if ((skb->len % 512) == 0) {
+ cpu_to_le32s(&padbytes);
memcpy( skb->tail, &padbytes, sizeof(padbytes));
skb_put(skb, sizeof(padbytes));
}
diff --git a/drivers/usb/net/cdc_subset.c b/drivers/usb/net/cdc_subset.c
index ae8fb06..bc62b01 100644
--- a/drivers/usb/net/cdc_subset.c
+++ b/drivers/usb/net/cdc_subset.c
@@ -79,13 +79,19 @@
*
* ALi M5632 driver ... does high speed
*
+ * NOTE that the MS-Windows drivers for this chip use some funky and
+ * (naturally) undocumented 7-byte prefix to each packet, so this is a
+ * case where we don't currently interoperate. Also, once you unplug
+ * one end of the cable, you need to replug the other end too ... since
+ * chip docs are unavailable, there's no way to reset the relevant state
+ * short of a power cycle.
+ *
*-------------------------------------------------------------------------*/
static const struct driver_info ali_m5632_info = {
.description = "ALi M5632",
};
-
#endif
@@ -159,6 +165,11 @@
#endif /* CONFIG_USB_EPSON2888 */
+/*-------------------------------------------------------------------------
+ *
+ * info from Jonathan McDowell <noodles@earth.li>
+ *
+ *-------------------------------------------------------------------------*/
#ifdef CONFIG_USB_KC2190
#define HAVE_HARDWARE
static const struct driver_info kc2190_info = {
@@ -223,6 +234,10 @@
USB_DEVICE (0x0402, 0x5632), // ALi defaults
.driver_info = (unsigned long) &ali_m5632_info,
},
+{
+ USB_DEVICE (0x182d,0x207c), // SiteCom CN-124
+ .driver_info = (unsigned long) &ali_m5632_info,
+},
#endif
#ifdef CONFIG_USB_AN2720
@@ -314,13 +329,13 @@
static int __init cdc_subset_init(void)
{
- return usb_register(&cdc_subset_driver);
+ return usb_register(&cdc_subset_driver);
}
module_init(cdc_subset_init);
static void __exit cdc_subset_exit(void)
{
- usb_deregister(&cdc_subset_driver);
+ usb_deregister(&cdc_subset_driver);
}
module_exit(cdc_subset_exit);
diff --git a/drivers/usb/net/usbnet.c b/drivers/usb/net/usbnet.c
index 43ba61a..de69b18 100644
--- a/drivers/usb/net/usbnet.c
+++ b/drivers/usb/net/usbnet.c
@@ -147,7 +147,7 @@
if (tmp < 0)
return tmp;
}
-
+
dev->in = usb_rcvbulkpipe (dev->udev,
in->desc.bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
dev->out = usb_sndbulkpipe (dev->udev,
@@ -327,7 +327,7 @@
if (netif_running (dev->net)
&& netif_device_present (dev->net)
&& !test_bit (EVENT_RX_HALT, &dev->flags)) {
- switch (retval = usb_submit_urb (urb, GFP_ATOMIC)){
+ switch (retval = usb_submit_urb (urb, GFP_ATOMIC)){
case -EPIPE:
usbnet_defer_kevent (dev, EVENT_RX_HALT);
break;
@@ -443,7 +443,7 @@
case -EOVERFLOW:
dev->stats.rx_over_errors++;
// FALLTHROUGH
-
+
default:
entry->state = rx_cleanup;
dev->stats.rx_errors++;
@@ -560,7 +560,7 @@
if (netif_msg_ifdown (dev))
devinfo (dev, "stop stats: rx/tx %ld/%ld, errs %ld/%ld",
- dev->stats.rx_packets, dev->stats.tx_packets,
+ dev->stats.rx_packets, dev->stats.tx_packets,
dev->stats.rx_errors, dev->stats.tx_errors
);
@@ -578,7 +578,7 @@
devdbg (dev, "waited for %d urb completions", temp);
}
dev->wait = NULL;
- remove_wait_queue (&unlink_wakeup, &wait);
+ remove_wait_queue (&unlink_wakeup, &wait);
usb_kill_urb(dev->interrupt);
@@ -834,7 +834,7 @@
}
if (test_bit (EVENT_LINK_RESET, &dev->flags)) {
- struct driver_info *info = dev->driver_info;
+ struct driver_info *info = dev->driver_info;
int retval = 0;
clear_bit (EVENT_LINK_RESET, &dev->flags);
@@ -1066,7 +1066,7 @@
* USB Device Driver support
*
*-------------------------------------------------------------------------*/
-
+
// precondition: never called in_interrupt
void usbnet_disconnect (struct usb_interface *intf)
@@ -1087,7 +1087,7 @@
intf->dev.driver->name,
xdev->bus->bus_name, xdev->devpath,
dev->driver_info->description);
-
+
net = dev->net;
unregister_netdev (net);
@@ -1111,7 +1111,7 @@
usbnet_probe (struct usb_interface *udev, const struct usb_device_id *prod)
{
struct usbnet *dev;
- struct net_device *net;
+ struct net_device *net;
struct usb_host_interface *interface;
struct driver_info *info;
struct usb_device *xdev;
@@ -1181,6 +1181,9 @@
// NOTE net->name still not usable ...
if (info->bind) {
status = info->bind (dev, udev);
+ if (status < 0)
+ goto out1;
+
// heuristic: "usb%d" for links we know are two-host,
// else "eth%d" when there's reasonable doubt. userspace
// can rename the link if it knows better.
@@ -1207,12 +1210,12 @@
if (status == 0 && dev->status)
status = init_status (dev, udev);
if (status < 0)
- goto out1;
+ goto out3;
if (!dev->rx_urb_size)
dev->rx_urb_size = dev->hard_mtu;
dev->maxpacket = usb_maxpacket (dev->udev, dev->out, 1);
-
+
SET_NETDEV_DEV(net, &udev->dev);
status = register_netdev (net);
if (status)
@@ -1255,7 +1258,7 @@
int usbnet_suspend (struct usb_interface *intf, pm_message_t message)
{
struct usbnet *dev = usb_get_intfdata(intf);
-
+
/* accelerate emptying of the rx and queues, to avoid
* having everything error out.
*/
@@ -1286,7 +1289,7 @@
< sizeof (struct skb_data));
random_ether_addr(node_id);
- return 0;
+ return 0;
}
module_init(usbnet_init);
diff --git a/drivers/usb/serial/airprime.c b/drivers/usb/serial/airprime.c
index 0af42e3..18816bf 100644
--- a/drivers/usb/serial/airprime.c
+++ b/drivers/usb/serial/airprime.c
@@ -58,11 +58,6 @@
if (urb->status) {
dbg("%s - nonzero read bulk status received: %d",
__FUNCTION__, urb->status);
- /* something happened, so free up the memory for this urb */
- if (urb->transfer_buffer) {
- kfree (urb->transfer_buffer);
- urb->transfer_buffer = NULL;
- }
return;
}
usb_serial_debug_data(debug, &port->dev, __FUNCTION__, urb->actual_length, data);
@@ -146,6 +141,8 @@
airprime_read_bulk_callback, port);
result = usb_submit_urb(urb, GFP_KERNEL);
if (result) {
+ usb_free_urb(urb);
+ kfree(buffer);
dev_err(&port->dev,
"%s - failed submitting read urb %d for port %d, error %d\n",
__FUNCTION__, i, port->number, result);
@@ -160,27 +157,12 @@
/* some error happened, cancel any submitted urbs and clean up anything that
got allocated successfully */
- for ( ; i >= 0; --i) {
+ while (i-- != 0) {
urb = priv->read_urbp[i];
- if (urb) {
- /* This urb was submitted successfully. So we have to
- cancel it.
- Unlinking the urb will invoke read_bulk_callback()
- with an error status, so its transfer buffer will
- be freed there */
- if (usb_unlink_urb (urb) != -EINPROGRESS) {
- /* comments in drivers/usb/core/urb.c say this
- can only happen if the urb was never submitted,
- or has completed already.
- Either way we may have to free the transfer
- buffer here. */
- if (urb->transfer_buffer) {
- kfree (urb->transfer_buffer);
- urb->transfer_buffer = NULL;
- }
- }
- usb_free_urb (urb);
- }
+ buffer = urb->transfer_buffer;
+ usb_kill_urb (urb);
+ usb_free_urb (urb);
+ kfree (buffer);
}
out:
@@ -194,10 +176,9 @@
dbg("%s - port %d", __FUNCTION__, port->number);
- /* killing the urb will invoke read_bulk_callback() with an error status,
- so the transfer buffer will be freed there */
for (i = 0; i < NUM_READ_URBS; ++i) {
usb_kill_urb (priv->read_urbp[i]);
+ kfree (priv->read_urbp[i]->transfer_buffer);
usb_free_urb (priv->read_urbp[i]);
}
diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c
index 3ec2487..db623e7 100644
--- a/drivers/usb/serial/cp2101.c
+++ b/drivers/usb/serial/cp2101.c
@@ -69,6 +69,7 @@
{ USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */
{ USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
{ USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */
+ { USB_DEVICE(0x10C5, 0xEA61) }, /* Silicon Labs MobiData GPRS USB Modem */
{ USB_DEVICE(0x13AD, 0x9999) }, /* Baltech card reader */
{ USB_DEVICE(0x16D6, 0x0001) }, /* Jablotron serial interface */
{ } /* Terminating Entry */
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index 601e064..53baeec 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -66,6 +66,8 @@
.num_bulk_out = NUM_DONT_CARE,
.num_ports = 1,
.shutdown = usb_serial_generic_shutdown,
+ .throttle = usb_serial_generic_throttle,
+ .unthrottle = usb_serial_generic_unthrottle,
};
static int generic_probe(struct usb_interface *interface,
@@ -115,6 +117,7 @@
{
struct usb_serial *serial = port->serial;
int result = 0;
+ unsigned long flags;
dbg("%s - port %d", __FUNCTION__, port->number);
@@ -124,7 +127,13 @@
if (port->tty)
port->tty->low_latency = 1;
- /* if we have a bulk interrupt, start reading from it */
+ /* clear the throttle flags */
+ spin_lock_irqsave(&port->lock, flags);
+ port->throttled = 0;
+ port->throttle_req = 0;
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ /* if we have a bulk endpoint, start reading from it */
if (serial->num_bulk_in) {
/* Start reading from the device */
usb_fill_bulk_urb (port->read_urb, serial->dev,
@@ -253,31 +262,22 @@
return (chars);
}
-void usb_serial_generic_read_bulk_callback (struct urb *urb)
+/* Push data to tty layer and resubmit the bulk read URB */
+static void flush_and_resubmit_read_urb (struct usb_serial_port *port)
{
- struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
struct usb_serial *serial = port->serial;
- struct tty_struct *tty;
- unsigned char *data = urb->transfer_buffer;
+ struct urb *urb = port->read_urb;
+ struct tty_struct *tty = port->tty;
int result;
- dbg("%s - port %d", __FUNCTION__, port->number);
-
- if (urb->status) {
- dbg("%s - nonzero read bulk status received: %d", __FUNCTION__, urb->status);
- return;
- }
-
- usb_serial_debug_data(debug, &port->dev, __FUNCTION__, urb->actual_length, data);
-
- tty = port->tty;
+ /* Push data to tty */
if (tty && urb->actual_length) {
tty_buffer_request_room(tty, urb->actual_length);
- tty_insert_flip_string(tty, data, urb->actual_length);
- tty_flip_buffer_push(tty);
+ tty_insert_flip_string(tty, urb->transfer_buffer, urb->actual_length);
+ tty_flip_buffer_push(tty); /* is this allowed from an URB callback ? */
}
- /* Continue trying to always read */
+ /* Continue reading from device */
usb_fill_bulk_urb (port->read_urb, serial->dev,
usb_rcvbulkpipe (serial->dev,
port->bulk_in_endpointAddress),
@@ -290,6 +290,40 @@
if (result)
dev_err(&port->dev, "%s - failed resubmitting read urb, error %d\n", __FUNCTION__, result);
}
+
+void usb_serial_generic_read_bulk_callback (struct urb *urb)
+{
+ struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
+ unsigned char *data = urb->transfer_buffer;
+ int is_throttled;
+ unsigned long flags;
+
+ dbg("%s - port %d", __FUNCTION__, port->number);
+
+ if (urb->status) {
+ dbg("%s - nonzero read bulk status received: %d", __FUNCTION__, urb->status);
+ return;
+ }
+
+ usb_serial_debug_data(debug, &port->dev, __FUNCTION__, urb->actual_length, data);
+
+ /* Throttle the device if requested by tty */
+ if (urb->actual_length) {
+ spin_lock_irqsave(&port->lock, flags);
+ is_throttled = port->throttled = port->throttle_req;
+ spin_unlock_irqrestore(&port->lock, flags);
+ if (is_throttled) {
+ /* Let the received data linger in the read URB;
+ * usb_serial_generic_unthrottle() will pick it
+ * up later. */
+ dbg("%s - throttling device", __FUNCTION__);
+ return;
+ }
+ }
+
+ /* Handle data and continue reading from device */
+ flush_and_resubmit_read_urb(port);
+}
EXPORT_SYMBOL_GPL(usb_serial_generic_read_bulk_callback);
void usb_serial_generic_write_bulk_callback (struct urb *urb)
@@ -308,6 +342,38 @@
}
EXPORT_SYMBOL_GPL(usb_serial_generic_write_bulk_callback);
+void usb_serial_generic_throttle (struct usb_serial_port *port)
+{
+ unsigned long flags;
+
+ dbg("%s - port %d", __FUNCTION__, port->number);
+
+ /* Set the throttle request flag. It will be picked up
+ * by usb_serial_generic_read_bulk_callback(). */
+ spin_lock_irqsave(&port->lock, flags);
+ port->throttle_req = 1;
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+void usb_serial_generic_unthrottle (struct usb_serial_port *port)
+{
+ int was_throttled;
+ unsigned long flags;
+
+ dbg("%s - port %d", __FUNCTION__, port->number);
+
+ /* Clear the throttle flags */
+ spin_lock_irqsave(&port->lock, flags);
+ was_throttled = port->throttled;
+ port->throttled = port->throttle_req = 0;
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ if (was_throttled) {
+ /* Handle pending data and resume reading from device */
+ flush_and_resubmit_read_urb(port);
+ }
+}
+
void usb_serial_generic_shutdown (struct usb_serial *serial)
{
int i;
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index ced9f32..9963a8b7 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -69,7 +69,6 @@
/* Vendor and product IDs */
#define OPTION_VENDOR_ID 0x0AF0
#define HUAWEI_VENDOR_ID 0x12D1
-#define AUDIOVOX_VENDOR_ID 0x0F3D
#define NOVATELWIRELESS_VENDOR_ID 0x1410
#define ANYDATA_VENDOR_ID 0x16d5
@@ -81,7 +80,6 @@
#define OPTION_PRODUCT_GTMAX36 0x6701
#define HUAWEI_PRODUCT_E600 0x1001
#define HUAWEI_PRODUCT_E220 0x1003
-#define AUDIOVOX_PRODUCT_AIRCARD 0x0112
#define NOVATELWIRELESS_PRODUCT_U740 0x1400
#define ANYDATA_PRODUCT_ID 0x6501
@@ -94,7 +92,6 @@
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_GTMAX36) },
{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600) },
{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220) },
- { USB_DEVICE(AUDIOVOX_VENDOR_ID, AUDIOVOX_PRODUCT_AIRCARD) },
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID,NOVATELWIRELESS_PRODUCT_U740) },
{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ID) },
{ } /* Terminating entry */
@@ -109,7 +106,6 @@
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_GTMAX36) },
{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600) },
{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220) },
- { USB_DEVICE(AUDIOVOX_VENDOR_ID, AUDIOVOX_PRODUCT_AIRCARD) },
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID,NOVATELWIRELESS_PRODUCT_U740) },
{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ID) },
{ } /* Terminating entry */
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 6c083d4..83dfae9 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -83,6 +83,7 @@
{ USB_DEVICE(BELKIN_VENDOR_ID, BELKIN_PRODUCT_ID) },
{ USB_DEVICE(ALCOR_VENDOR_ID, ALCOR_PRODUCT_ID) },
{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_ID) },
+ { USB_DEVICE(WS002IN_VENDOR_ID, WS002IN_PRODUCT_ID) },
{ } /* Terminating entry */
};
diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h
index 65a5039..f9a71d0 100644
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -97,3 +97,8 @@
/* Huawei E620 UMTS/HSDPA card (ID: 12d1:1001) */
#define HUAWEI_VENDOR_ID 0x12d1
#define HUAWEI_PRODUCT_ID 0x1001
+
+/* Willcom WS002IN Data Driver (by NetIndex Inc.) */
+#define WS002IN_VENDOR_ID 0x11f6
+#define WS002IN_PRODUCT_ID 0x2001
+
diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c
index 70234f5..e227f64 100644
--- a/drivers/usb/storage/scsiglue.c
+++ b/drivers/usb/storage/scsiglue.c
@@ -153,6 +153,12 @@
if (us->flags & US_FL_FIX_CAPACITY)
sdev->fix_capacity = 1;
+ /* A few disks have two indistinguishable version, one of
+ * which reports the correct capacity and the other does not.
+ * The sd driver has to guess which is the case. */
+ if (us->flags & US_FL_CAPACITY_HEURISTICS)
+ sdev->guess_capacity = 1;
+
/* Some devices report a SCSI revision level above 2 but are
* unable to handle the REPORT LUNS command (for which
* support is mandatory at level 3). Since we already have
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index f49a62f..9644a8e 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -1101,6 +1101,15 @@
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_SINGLE_LUN),
+/* Submitted by Dylan Taft <d13f00l@gmail.com>
+ * US_FL_IGNORE_RESIDUE Needed
+ */
+UNUSUAL_DEV( 0x08ca, 0x3103, 0x0100, 0x0100,
+ "AIPTEK",
+ "Aiptek USB Keychain MP3 Player",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_IGNORE_RESIDUE),
+
/* Entry needed for flags. Moreover, all devices with this ID use
* bulk-only transport, but _some_ falsely report Control/Bulk instead.
* One example is "Trumpion Digital Research MYMP3".
@@ -1311,12 +1320,13 @@
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_NO_WP_DETECT ),
-/* Reported by Jan Mate <mate@fiit.stuba.sk> */
+/* Reported by Jan Mate <mate@fiit.stuba.sk>
+ * and by Soeren Sonnenburg <kernel@nn7.de> */
UNUSUAL_DEV( 0x0fce, 0xe030, 0x0000, 0x0000,
"Sony Ericsson",
"P990i",
US_SC_DEVICE, US_PR_DEVICE, NULL,
- US_FL_FIX_CAPACITY ),
+ US_FL_FIX_CAPACITY | US_FL_IGNORE_RESIDUE ),
/* Reported by Emmanuel Vasilakis <evas@forthnet.gr> */
UNUSUAL_DEV( 0x0fce, 0xe031, 0x0000, 0x0000,
@@ -1385,6 +1395,16 @@
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
+/* Reported by Thomas Baechler <thomas@archlinux.org>
+ * Fixes I/O errors with Teac HD-35PU devices
+ */
+
+UNUSUAL_DEV( 0x1652, 0x6600, 0x0201, 0x0201,
+ "Super Top",
+ "USB 2.0 IDE DEVICE",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_IGNORE_RESIDUE),
+
/* patch submitted by Davide Perini <perini.davide@dpsoftware.org>
* and Renato Perini <rperini@email.it>
*/
@@ -1423,7 +1443,7 @@
"DataStor",
"USB4500 FW1.04",
US_SC_DEVICE, US_PR_DEVICE, NULL,
- US_FL_FIX_CAPACITY),
+ US_FL_CAPACITY_HEURISTICS),
/* Control/Bulk transport for all SubClass values */
USUAL_DEV(US_SC_RBC, US_PR_CB, USB_US_TYPE_STOR),
diff --git a/drivers/usb/usb-skeleton.c b/drivers/usb/usb-skeleton.c
index 296b091..46929a1 100644
--- a/drivers/usb/usb-skeleton.c
+++ b/drivers/usb/usb-skeleton.c
@@ -90,14 +90,16 @@
goto exit;
}
- /* prevent the device from being autosuspended */
- retval = usb_autopm_get_interface(interface);
- if (retval)
- goto exit;
-
/* increment our usage count for the device */
kref_get(&dev->kref);
+ /* prevent the device from being autosuspended */
+ retval = usb_autopm_get_interface(interface);
+ if (retval) {
+ kref_put(&dev->kref, skel_delete);
+ goto exit;
+ }
+
/* save our object in the file's private structure */
file->private_data = dev;
diff --git a/fs/debugfs/file.c b/fs/debugfs/file.c
index 8d130cc..682f928 100644
--- a/fs/debugfs/file.c
+++ b/fs/debugfs/file.c
@@ -16,6 +16,7 @@
#include <linux/module.h>
#include <linux/fs.h>
#include <linux/pagemap.h>
+#include <linux/namei.h>
#include <linux/debugfs.h>
static ssize_t default_read_file(struct file *file, char __user *buf,
@@ -44,6 +45,17 @@
.open = default_open,
};
+static void *debugfs_follow_link(struct dentry *dentry, struct nameidata *nd)
+{
+ nd_set_link(nd, dentry->d_inode->i_private);
+ return NULL;
+}
+
+const struct inode_operations debugfs_link_operations = {
+ .readlink = generic_readlink,
+ .follow_link = debugfs_follow_link,
+};
+
static void debugfs_u8_set(void *data, u64 val)
{
*(u8 *)data = val;
diff --git a/fs/debugfs/inode.c b/fs/debugfs/inode.c
index c692487..7b324cf 100644
--- a/fs/debugfs/inode.c
+++ b/fs/debugfs/inode.c
@@ -25,11 +25,13 @@
#include <linux/namei.h>
#include <linux/debugfs.h>
#include <linux/fsnotify.h>
+#include <linux/string.h>
#define DEBUGFS_MAGIC 0x64626720
/* declared over in file.c */
extern struct file_operations debugfs_file_operations;
+extern struct inode_operations debugfs_link_operations;
static struct vfsmount *debugfs_mount;
static int debugfs_mount_count;
@@ -51,6 +53,9 @@
case S_IFREG:
inode->i_fop = &debugfs_file_operations;
break;
+ case S_IFLNK:
+ inode->i_op = &debugfs_link_operations;
+ break;
case S_IFDIR:
inode->i_op = &simple_dir_inode_operations;
inode->i_fop = &simple_dir_operations;
@@ -96,6 +101,12 @@
return res;
}
+static int debugfs_link(struct inode *dir, struct dentry *dentry, int mode)
+{
+ mode = (mode & S_IALLUGO) | S_IFLNK;
+ return debugfs_mknod(dir, dentry, mode, 0);
+}
+
static int debugfs_create(struct inode *dir, struct dentry *dentry, int mode)
{
int res;
@@ -158,10 +169,17 @@
mutex_lock(&parent->d_inode->i_mutex);
*dentry = lookup_one_len(name, parent, strlen(name));
if (!IS_ERR(*dentry)) {
- if ((mode & S_IFMT) == S_IFDIR)
+ switch (mode & S_IFMT) {
+ case S_IFDIR:
error = debugfs_mkdir(parent->d_inode, *dentry, mode);
- else
+ break;
+ case S_IFLNK:
+ error = debugfs_link(parent->d_inode, *dentry, mode);
+ break;
+ default:
error = debugfs_create(parent->d_inode, *dentry, mode);
+ break;
+ }
dput(*dentry);
} else
error = PTR_ERR(*dentry);
@@ -194,9 +212,7 @@
* you are responsible here.) If an error occurs, %NULL will be returned.
*
* If debugfs is not enabled in the kernel, the value -%ENODEV will be
- * returned. It is not wise to check for this value, but rather, check for
- * %NULL or !%NULL instead as to eliminate the need for #ifdef in the calling
- * code.
+ * returned.
*/
struct dentry *debugfs_create_file(const char *name, mode_t mode,
struct dentry *parent, void *data,
@@ -246,9 +262,7 @@
* you are responsible here.) If an error occurs, %NULL will be returned.
*
* If debugfs is not enabled in the kernel, the value -%ENODEV will be
- * returned. It is not wise to check for this value, but rather, check for
- * %NULL or !%NULL instead as to eliminate the need for #ifdef in the calling
- * code.
+ * returned.
*/
struct dentry *debugfs_create_dir(const char *name, struct dentry *parent)
{
@@ -259,6 +273,47 @@
EXPORT_SYMBOL_GPL(debugfs_create_dir);
/**
+ * debugfs_create_symlink- create a symbolic link in the debugfs filesystem
+ * @name: a pointer to a string containing the name of the symbolic link to
+ * create.
+ * @parent: a pointer to the parent dentry for this symbolic link. This
+ * should be a directory dentry if set. If this paramater is NULL,
+ * then the symbolic link will be created in the root of the debugfs
+ * filesystem.
+ * @target: a pointer to a string containing the path to the target of the
+ * symbolic link.
+ *
+ * This function creates a symbolic link with the given name in debugfs that
+ * links to the given target path.
+ *
+ * This function will return a pointer to a dentry if it succeeds. This
+ * pointer must be passed to the debugfs_remove() function when the symbolic
+ * link is to be removed (no automatic cleanup happens if your module is
+ * unloaded, you are responsible here.) If an error occurs, %NULL will be
+ * returned.
+ *
+ * If debugfs is not enabled in the kernel, the value -%ENODEV will be
+ * returned.
+ */
+struct dentry *debugfs_create_symlink(const char *name, struct dentry *parent,
+ const char *target)
+{
+ struct dentry *result;
+ char *link;
+
+ link = kstrdup(target, GFP_KERNEL);
+ if (!link)
+ return NULL;
+
+ result = debugfs_create_file(name, S_IFLNK | S_IRWXUGO, parent, link,
+ NULL);
+ if (!result)
+ kfree(link);
+ return result;
+}
+EXPORT_SYMBOL_GPL(debugfs_create_symlink);
+
+/**
* debugfs_remove - removes a file or directory from the debugfs filesystem
* @dentry: a pointer to a the dentry of the file or directory to be
* removed.
@@ -287,15 +342,22 @@
if (debugfs_positive(dentry)) {
if (dentry->d_inode) {
dget(dentry);
- if (S_ISDIR(dentry->d_inode->i_mode)) {
+ switch (dentry->d_inode->i_mode & S_IFMT) {
+ case S_IFDIR:
ret = simple_rmdir(parent->d_inode, dentry);
if (ret)
printk(KERN_ERR
"DebugFS rmdir on %s failed : "
"directory not empty.\n",
dentry->d_name.name);
- } else
+ break;
+ case S_IFLNK:
+ kfree(dentry->d_inode->i_private);
+ /* fall through */
+ default:
simple_unlink(parent->d_inode, dentry);
+ break;
+ }
if (!ret)
d_delete(dentry);
dput(dentry);
diff --git a/fs/partitions/check.c b/fs/partitions/check.c
index ac32a2e..22d38ff 100644
--- a/fs/partitions/check.c
+++ b/fs/partitions/check.c
@@ -358,8 +358,7 @@
p->ios[0] = p->ios[1] = 0;
p->sectors[0] = p->sectors[1] = 0;
sysfs_remove_link(&p->kobj, "subsystem");
- if (p->holder_dir)
- kobject_unregister(p->holder_dir);
+ kobject_unregister(p->holder_dir);
kobject_uevent(&p->kobj, KOBJ_REMOVE);
kobject_del(&p->kobj);
kobject_put(&p->kobj);
@@ -603,10 +602,8 @@
disk->stamp = 0;
kobject_uevent(&disk->kobj, KOBJ_REMOVE);
- if (disk->holder_dir)
- kobject_unregister(disk->holder_dir);
- if (disk->slave_dir)
- kobject_unregister(disk->slave_dir);
+ kobject_unregister(disk->holder_dir);
+ kobject_unregister(disk->slave_dir);
if (disk->driverfs_dev) {
char *disk_name = make_block_name(disk);
sysfs_remove_link(&disk->kobj, "device");
diff --git a/fs/sysfs/file.c b/fs/sysfs/file.c
index c0e1176..98b0910 100644
--- a/fs/sysfs/file.c
+++ b/fs/sysfs/file.c
@@ -54,7 +54,7 @@
/**
* add_to_collection - add buffer to a collection
* @buffer: buffer to be added
- * @node inode of set to add to
+ * @node: inode of set to add to
*/
static inline void
diff --git a/include/acpi/acinterp.h b/include/acpi/acinterp.h
index ce7c9d6..73967c8 100644
--- a/include/acpi/acinterp.h
+++ b/include/acpi/acinterp.h
@@ -253,7 +253,8 @@
void acpi_ex_release_all_mutexes(struct acpi_thread_state *thread);
-void acpi_ex_unlink_mutex(union acpi_operand_object *obj_desc);
+void acpi_ex_unlink_mutex(union acpi_operand_object *obj_desc,
+ struct acpi_thread_state *thread);
/*
* exprep - ACPI AML execution - prep utilities
diff --git a/include/acpi/acobject.h b/include/acpi/acobject.h
index 04e9735..5206d61 100644
--- a/include/acpi/acobject.h
+++ b/include/acpi/acobject.h
@@ -155,7 +155,7 @@
struct acpi_object_mutex {
ACPI_OBJECT_COMMON_HEADER u8 sync_level; /* 0-15, specified in Mutex() call */
u16 acquisition_depth; /* Allow multiple Acquires, same thread */
- struct acpi_thread_state *owner_thread; /* Current owner of the mutex */
+ acpi_thread_id owner_thread_id; /* Current owner of the mutex */
acpi_mutex os_mutex; /* Actual OS synchronization object */
union acpi_operand_object *prev; /* Link for list of acquired mutexes */
union acpi_operand_object *next; /* Link for list of acquired mutexes */
diff --git a/include/acpi/acpi_drivers.h b/include/acpi/acpi_drivers.h
index 4dc8a50..f6275b0 100644
--- a/include/acpi/acpi_drivers.h
+++ b/include/acpi/acpi_drivers.h
@@ -105,12 +105,6 @@
int acpi_processor_set_thermal_limit(acpi_handle handle, int type);
-/* --------------------------------------------------------------------------
- Hot Keys
- -------------------------------------------------------------------------- */
-
-extern int acpi_specific_hotkey_enabled;
-
/*--------------------------------------------------------------------------
Dock Station
-------------------------------------------------------------------------- */
@@ -122,10 +116,34 @@
acpi_notify_handler handler, void *context);
extern void unregister_hotplug_dock_device(acpi_handle handle);
#else
-#define is_dock_device(h) (0)
-#define register_dock_notifier(nb) (-ENODEV)
-#define unregister_dock_notifier(nb) do { } while(0)
-#define register_hotplug_dock_device(h1, h2, c) (-ENODEV)
-#define unregister_hotplug_dock_device(h) do { } while(0)
+static inline int is_dock_device(acpi_handle handle)
+{
+ return 0;
+}
+static inline int register_dock_notifier(struct notifier_block *nb)
+{
+ return -ENODEV;
+}
+static inline void unregister_dock_notifier(struct notifier_block *nb)
+{
+}
+static inline int register_hotplug_dock_device(acpi_handle handle,
+ acpi_notify_handler handler, void *context)
+{
+ return -ENODEV;
+}
+static inline void unregister_hotplug_dock_device(acpi_handle handle)
+{
+}
#endif
+
+/*--------------------------------------------------------------------------
+ Suspend/Resume
+ -------------------------------------------------------------------------- */
+#ifdef CONFIG_ACPI_SLEEP
+extern int acpi_sleep_init(void);
+#else
+#define acpi_sleep_init() do {} while (0)
+#endif
+
#endif /*__ACPI_DRIVERS_H__*/
diff --git a/include/acpi/acpiosxf.h b/include/acpi/acpiosxf.h
index 781394b..2785058 100644
--- a/include/acpi/acpiosxf.h
+++ b/include/acpi/acpiosxf.h
@@ -240,12 +240,6 @@
acpi_os_validate_address(u8 space_id,
acpi_physical_address address, acpi_size length);
-u8 acpi_os_readable(void *pointer, acpi_size length);
-
-#ifdef ACPI_FUTURE_USAGE
-u8 acpi_os_writable(void *pointer, acpi_size length);
-#endif
-
u64 acpi_os_get_timer(void);
acpi_status acpi_os_signal(u32 function, void *info);
diff --git a/include/asm-arm/.gitignore b/include/asm-arm/.gitignore
new file mode 100644
index 0000000..e02c15d
--- /dev/null
+++ b/include/asm-arm/.gitignore
@@ -0,0 +1,2 @@
+arch
+mach-types.h
diff --git a/include/asm-arm/arch-at91rm9200/at91_aic.h b/include/asm-arm/arch-at91/at91_aic.h
similarity index 97%
rename from include/asm-arm/arch-at91rm9200/at91_aic.h
rename to include/asm-arm/arch-at91/at91_aic.h
index 267e698..df44c12 100644
--- a/include/asm-arm/arch-at91rm9200/at91_aic.h
+++ b/include/asm-arm/arch-at91/at91_aic.h
@@ -1,5 +1,5 @@
/*
- * include/asm-arm/arch-at91rm9200/at91_aic.h
+ * include/asm-arm/arch-at91/at91_aic.h
*
* Copyright (C) 2005 Ivan Kokshaysky
* Copyright (C) SAN People
diff --git a/include/asm-arm/arch-at91rm9200/at91_dbgu.h b/include/asm-arm/arch-at91/at91_dbgu.h
similarity index 76%
rename from include/asm-arm/arch-at91rm9200/at91_dbgu.h
rename to include/asm-arm/arch-at91/at91_dbgu.h
index e4b8b27..b0369e1 100644
--- a/include/asm-arm/arch-at91rm9200/at91_dbgu.h
+++ b/include/asm-arm/arch-at91/at91_dbgu.h
@@ -1,5 +1,5 @@
/*
- * include/asm-arm/arch-at91rm9200/at91_dbgu.h
+ * include/asm-arm/arch-at91/at91_dbgu.h
*
* Copyright (C) 2005 Ivan Kokshaysky
* Copyright (C) SAN People
@@ -35,6 +35,20 @@
#define AT91_CIDR_NVPSIZ (0xf << 8) /* Nonvolatile Program Memory Size */
#define AT91_CIDR_NVPSIZ2 (0xf << 12) /* Second Nonvolatile Program Memory Size */
#define AT91_CIDR_SRAMSIZ (0xf << 16) /* Internal SRAM Size */
+#define AT91_CIDR_SRAMSIZ_1K (1 << 16)
+#define AT91_CIDR_SRAMSIZ_2K (2 << 16)
+#define AT91_CIDR_SRAMSIZ_112K (4 << 16)
+#define AT91_CIDR_SRAMSIZ_4K (5 << 16)
+#define AT91_CIDR_SRAMSIZ_80K (6 << 16)
+#define AT91_CIDR_SRAMSIZ_160K (7 << 16)
+#define AT91_CIDR_SRAMSIZ_8K (8 << 16)
+#define AT91_CIDR_SRAMSIZ_16K (9 << 16)
+#define AT91_CIDR_SRAMSIZ_32K (10 << 16)
+#define AT91_CIDR_SRAMSIZ_64K (11 << 16)
+#define AT91_CIDR_SRAMSIZ_128K (12 << 16)
+#define AT91_CIDR_SRAMSIZ_256K (13 << 16)
+#define AT91_CIDR_SRAMSIZ_96K (14 << 16)
+#define AT91_CIDR_SRAMSIZ_512K (15 << 16)
#define AT91_CIDR_ARCH (0xff << 20) /* Architecture Identifier */
#define AT91_CIDR_NVPTYP (7 << 28) /* Nonvolatile Program Memory Type */
#define AT91_CIDR_EXT (1 << 31) /* Extension Flag */
diff --git a/include/asm-arm/arch-at91rm9200/at91_ecc.h b/include/asm-arm/arch-at91/at91_ecc.h
similarity index 96%
rename from include/asm-arm/arch-at91rm9200/at91_ecc.h
rename to include/asm-arm/arch-at91/at91_ecc.h
index 5c564ed..ff93df5 100644
--- a/include/asm-arm/arch-at91rm9200/at91_ecc.h
+++ b/include/asm-arm/arch-at91/at91_ecc.h
@@ -1,5 +1,5 @@
/*
- * include/asm-arm/arch-at91rm9200/at91_ecc.h
+ * include/asm-arm/arch-at91/at91_ecc.h
*
* Error Corrected Code Controller (ECC) - System peripherals regsters.
* Based on AT91SAM9260 datasheet revision B.
diff --git a/include/asm-arm/arch-at91rm9200/at91_lcdc.h b/include/asm-arm/arch-at91/at91_lcdc.h
similarity index 99%
rename from include/asm-arm/arch-at91rm9200/at91_lcdc.h
rename to include/asm-arm/arch-at91/at91_lcdc.h
index 9cbfcdd..ab040a4 100644
--- a/include/asm-arm/arch-at91rm9200/at91_lcdc.h
+++ b/include/asm-arm/arch-at91/at91_lcdc.h
@@ -1,5 +1,5 @@
/*
- * include/asm-arm/arch-at91rm9200/at91_lcdc.h
+ * include/asm-arm/arch-at91/at91_lcdc.h
*
* LCD Controller (LCDC).
* Based on AT91SAM9261 datasheet revision E.
diff --git a/include/asm-arm/arch-at91rm9200/at91_mci.h b/include/asm-arm/arch-at91/at91_mci.h
similarity index 98%
rename from include/asm-arm/arch-at91rm9200/at91_mci.h
rename to include/asm-arm/arch-at91/at91_mci.h
index 9a552cb..40a9876 100644
--- a/include/asm-arm/arch-at91rm9200/at91_mci.h
+++ b/include/asm-arm/arch-at91/at91_mci.h
@@ -1,5 +1,5 @@
/*
- * include/asm-arm/arch-at91rm9200/at91_mci.h
+ * include/asm-arm/arch-at91/at91_mci.h
*
* Copyright (C) 2005 Ivan Kokshaysky
* Copyright (C) SAN People
diff --git a/include/asm-arm/arch-at91rm9200/at91_pio.h b/include/asm-arm/arch-at91/at91_pio.h
similarity index 97%
rename from include/asm-arm/arch-at91rm9200/at91_pio.h
rename to include/asm-arm/arch-at91/at91_pio.h
index 680eaa1..84c3866 100644
--- a/include/asm-arm/arch-at91rm9200/at91_pio.h
+++ b/include/asm-arm/arch-at91/at91_pio.h
@@ -1,5 +1,5 @@
/*
- * include/asm-arm/arch-at91rm9200/at91_pio.h
+ * include/asm-arm/arch-at91/at91_pio.h
*
* Copyright (C) 2005 Ivan Kokshaysky
* Copyright (C) SAN People
diff --git a/include/asm-arm/arch-at91rm9200/at91_pit.h b/include/asm-arm/arch-at91/at91_pit.h
similarity index 95%
rename from include/asm-arm/arch-at91rm9200/at91_pit.h
rename to include/asm-arm/arch-at91/at91_pit.h
index 4a30d009..5026325 100644
--- a/include/asm-arm/arch-at91rm9200/at91_pit.h
+++ b/include/asm-arm/arch-at91/at91_pit.h
@@ -1,5 +1,5 @@
/*
- * include/asm-arm/arch-at91rm9200/at91_pit.h
+ * include/asm-arm/arch-at91/at91_pit.h
*
* Periodic Interval Timer (PIT) - System peripherals regsters.
* Based on AT91SAM9261 datasheet revision D.
diff --git a/include/asm-arm/arch-at91rm9200/at91_pmc.h b/include/asm-arm/arch-at91/at91_pmc.h
similarity index 98%
rename from include/asm-arm/arch-at91rm9200/at91_pmc.h
rename to include/asm-arm/arch-at91/at91_pmc.h
index c3b489d..33ff5b6 100644
--- a/include/asm-arm/arch-at91rm9200/at91_pmc.h
+++ b/include/asm-arm/arch-at91/at91_pmc.h
@@ -1,5 +1,5 @@
/*
- * include/asm-arm/arch-at91rm9200/at91_pmc.h
+ * include/asm-arm/arch-at91/at91_pmc.h
*
* Copyright (C) 2005 Ivan Kokshaysky
* Copyright (C) SAN People
diff --git a/include/asm-arm/arch-at91rm9200/at91_rstc.h b/include/asm-arm/arch-at91/at91_rstc.h
similarity index 90%
rename from include/asm-arm/arch-at91rm9200/at91_rstc.h
rename to include/asm-arm/arch-at91/at91_rstc.h
index 237d3c4..fb8d161 100644
--- a/include/asm-arm/arch-at91rm9200/at91_rstc.h
+++ b/include/asm-arm/arch-at91/at91_rstc.h
@@ -1,5 +1,5 @@
/*
- * include/asm-arm/arch-at91rm9200/at91_rstc.h
+ * include/asm-arm/arch-at91/at91_rstc.h
*
* Reset Controller (RSTC) - System peripherals regsters.
* Based on AT91SAM9261 datasheet revision D.
@@ -17,7 +17,7 @@
#define AT91_RSTC_PROCRST (1 << 0) /* Processor Reset */
#define AT91_RSTC_PERRST (1 << 2) /* Peripheral Reset */
#define AT91_RSTC_EXTRST (1 << 3) /* External Reset */
-#define AT91_RSTC_KEY (0xff << 24) /* KEY Password */
+#define AT91_RSTC_KEY (0xa5 << 24) /* KEY Password */
#define AT91_RSTC_SR (AT91_RSTC + 0x04) /* Reset Controller Status Register */
#define AT91_RSTC_URSTS (1 << 0) /* User Reset Status */
@@ -34,6 +34,5 @@
#define AT91_RSTC_URSTEN (1 << 0) /* User Reset Enable */
#define AT91_RSTC_URSTIEN (1 << 4) /* User Reset Interrupt Enable */
#define AT91_RSTC_ERSTL (0xf << 8) /* External Reset Length */
-#define AT91_RSTC_KEY (0xff << 24) /* KEY Password */
#endif
diff --git a/include/asm-arm/arch-at91rm9200/at91_rtc.h b/include/asm-arm/arch-at91/at91_rtc.h
similarity index 98%
rename from include/asm-arm/arch-at91rm9200/at91_rtc.h
rename to include/asm-arm/arch-at91/at91_rtc.h
index 095fe08..af9bd28 100644
--- a/include/asm-arm/arch-at91rm9200/at91_rtc.h
+++ b/include/asm-arm/arch-at91/at91_rtc.h
@@ -1,5 +1,5 @@
/*
- * include/asm-arm/arch-at91rm9200/at91_rtc.h
+ * include/asm-arm/arch-at91/at91_rtc.h
*
* Copyright (C) 2005 Ivan Kokshaysky
* Copyright (C) SAN People
diff --git a/include/asm-arm/arch-at91rm9200/at91_rtt.h b/include/asm-arm/arch-at91/at91_rtt.h
similarity index 96%
rename from include/asm-arm/arch-at91rm9200/at91_rtt.h
rename to include/asm-arm/arch-at91/at91_rtt.h
index c6751ba..bae1103 100644
--- a/include/asm-arm/arch-at91rm9200/at91_rtt.h
+++ b/include/asm-arm/arch-at91/at91_rtt.h
@@ -1,5 +1,5 @@
/*
- * include/asm-arm/arch-at91rm9200/at91_rtt.h
+ * include/asm-arm/arch-at91/at91_rtt.h
*
* Real-time Timer (RTT) - System peripherals regsters.
* Based on AT91SAM9261 datasheet revision D.
diff --git a/include/asm-arm/arch-at91rm9200/at91_shdwc.h b/include/asm-arm/arch-at91/at91_shdwc.h
similarity index 96%
rename from include/asm-arm/arch-at91rm9200/at91_shdwc.h
rename to include/asm-arm/arch-at91/at91_shdwc.h
index 0439250..795fcc2 100644
--- a/include/asm-arm/arch-at91rm9200/at91_shdwc.h
+++ b/include/asm-arm/arch-at91/at91_shdwc.h
@@ -1,5 +1,5 @@
/*
- * include/asm-arm/arch-at91rm9200/at91_shdwc.h
+ * include/asm-arm/arch-at91/at91_shdwc.h
*
* Shutdown Controller (SHDWC) - System peripherals regsters.
* Based on AT91SAM9261 datasheet revision D.
diff --git a/include/asm-arm/arch-at91rm9200/at91_spi.h b/include/asm-arm/arch-at91/at91_spi.h
similarity index 98%
rename from include/asm-arm/arch-at91rm9200/at91_spi.h
rename to include/asm-arm/arch-at91/at91_spi.h
index bec48ca..f9b9a84 100644
--- a/include/asm-arm/arch-at91rm9200/at91_spi.h
+++ b/include/asm-arm/arch-at91/at91_spi.h
@@ -1,5 +1,5 @@
/*
- * include/asm-arm/arch-at91rm9200/at91_spi.h
+ * include/asm-arm/arch-at91/at91_spi.h
*
* Copyright (C) 2005 Ivan Kokshaysky
* Copyright (C) SAN People
diff --git a/include/asm-arm/arch-at91rm9200/at91_ssc.h b/include/asm-arm/arch-at91/at91_ssc.h
similarity index 98%
rename from include/asm-arm/arch-at91rm9200/at91_ssc.h
rename to include/asm-arm/arch-at91/at91_ssc.h
index 694bcaa..0ecc734 100644
--- a/include/asm-arm/arch-at91rm9200/at91_ssc.h
+++ b/include/asm-arm/arch-at91/at91_ssc.h
@@ -1,5 +1,5 @@
/*
- * include/asm-arm/arch-at91rm9200/at91_ssc.h
+ * include/asm-arm/arch-at91/at91_ssc.h
*
* Copyright (C) SAN People
*
diff --git a/include/asm-arm/arch-at91rm9200/at91_st.h b/include/asm-arm/arch-at91/at91_st.h
similarity index 97%
rename from include/asm-arm/arch-at91rm9200/at91_st.h
rename to include/asm-arm/arch-at91/at91_st.h
index 2432ddf..30446e2 100644
--- a/include/asm-arm/arch-at91rm9200/at91_st.h
+++ b/include/asm-arm/arch-at91/at91_st.h
@@ -1,5 +1,5 @@
/*
- * include/asm-arm/arch-at91rm9200/at91_st.h
+ * include/asm-arm/arch-at91/at91_st.h
*
* Copyright (C) 2005 Ivan Kokshaysky
* Copyright (C) SAN People
diff --git a/include/asm-arm/arch-at91rm9200/at91_tc.h b/include/asm-arm/arch-at91/at91_tc.h
similarity index 99%
rename from include/asm-arm/arch-at91rm9200/at91_tc.h
rename to include/asm-arm/arch-at91/at91_tc.h
index 8d06eb0..b85d3fa 100644
--- a/include/asm-arm/arch-at91rm9200/at91_tc.h
+++ b/include/asm-arm/arch-at91/at91_tc.h
@@ -1,5 +1,5 @@
/*
- * include/asm-arm/arch-at91rm9200/at91_tc.h
+ * include/asm-arm/arch-at91/at91_tc.h
*
* Copyright (C) SAN People
*
diff --git a/include/asm-arm/arch-at91rm9200/at91_twi.h b/include/asm-arm/arch-at91/at91_twi.h
similarity index 97%
rename from include/asm-arm/arch-at91rm9200/at91_twi.h
rename to include/asm-arm/arch-at91/at91_twi.h
index cda914f..ca9a907 100644
--- a/include/asm-arm/arch-at91rm9200/at91_twi.h
+++ b/include/asm-arm/arch-at91/at91_twi.h
@@ -1,5 +1,5 @@
/*
- * include/asm-arm/arch-at91rm9200/at91_twi.h
+ * include/asm-arm/arch-at91/at91_twi.h
*
* Copyright (C) 2005 Ivan Kokshaysky
* Copyright (C) SAN People
diff --git a/include/asm-arm/arch-at91rm9200/at91_wdt.h b/include/asm-arm/arch-at91/at91_wdt.h
similarity index 96%
rename from include/asm-arm/arch-at91rm9200/at91_wdt.h
rename to include/asm-arm/arch-at91/at91_wdt.h
index ac63e77..7251a34 100644
--- a/include/asm-arm/arch-at91rm9200/at91_wdt.h
+++ b/include/asm-arm/arch-at91/at91_wdt.h
@@ -1,5 +1,5 @@
/*
- * include/asm-arm/arch-at91rm9200/at91_wdt.h
+ * include/asm-arm/arch-at91/at91_wdt.h
*
* Watchdog Timer (WDT) - System peripherals regsters.
* Based on AT91SAM9261 datasheet revision D.
diff --git a/include/asm-arm/arch-at91rm9200/at91rm9200.h b/include/asm-arm/arch-at91/at91rm9200.h
similarity index 99%
rename from include/asm-arm/arch-at91rm9200/at91rm9200.h
rename to include/asm-arm/arch-at91/at91rm9200.h
index c569b6a..a12ac8a 100644
--- a/include/asm-arm/arch-at91rm9200/at91rm9200.h
+++ b/include/asm-arm/arch-at91/at91rm9200.h
@@ -1,5 +1,5 @@
/*
- * include/asm-arm/arch-at91rm9200/at91rm9200.h
+ * include/asm-arm/arch-at91/at91rm9200.h
*
* Copyright (C) 2005 Ivan Kokshaysky
* Copyright (C) SAN People
diff --git a/include/asm-arm/arch-at91rm9200/at91rm9200_emac.h b/include/asm-arm/arch-at91/at91rm9200_emac.h
similarity index 98%
rename from include/asm-arm/arch-at91rm9200/at91rm9200_emac.h
rename to include/asm-arm/arch-at91/at91rm9200_emac.h
index fbc091e..0c417af 100644
--- a/include/asm-arm/arch-at91rm9200/at91rm9200_emac.h
+++ b/include/asm-arm/arch-at91/at91rm9200_emac.h
@@ -1,5 +1,5 @@
/*
- * include/asm-arm/arch-at91rm9200/at91rm9200_emac.h
+ * include/asm-arm/arch-at91/at91rm9200_emac.h
*
* Copyright (C) 2005 Ivan Kokshaysky
* Copyright (C) SAN People
diff --git a/include/asm-arm/arch-at91rm9200/at91rm9200_mc.h b/include/asm-arm/arch-at91/at91rm9200_mc.h
similarity index 99%
rename from include/asm-arm/arch-at91rm9200/at91rm9200_mc.h
rename to include/asm-arm/arch-at91/at91rm9200_mc.h
index 0c0d814..24d0129 100644
--- a/include/asm-arm/arch-at91rm9200/at91rm9200_mc.h
+++ b/include/asm-arm/arch-at91/at91rm9200_mc.h
@@ -1,5 +1,5 @@
/*
- * include/asm-arm/arch-at91rm9200/at91rm9200_mc.h
+ * include/asm-arm/arch-at91/at91rm9200_mc.h
*
* Copyright (C) 2005 Ivan Kokshaysky
* Copyright (C) SAN People
diff --git a/include/asm-arm/arch-at91rm9200/at91sam9260.h b/include/asm-arm/arch-at91/at91sam9260.h
similarity index 95%
rename from include/asm-arm/arch-at91rm9200/at91sam9260.h
rename to include/asm-arm/arch-at91/at91sam9260.h
index 46f4dd6..2cadebc 100644
--- a/include/asm-arm/arch-at91rm9200/at91sam9260.h
+++ b/include/asm-arm/arch-at91/at91sam9260.h
@@ -1,5 +1,5 @@
/*
- * include/asm-arm/arch-at91rm9200/at91sam9260.h
+ * include/asm-arm/arch-at91/at91sam9260.h
*
* (C) 2006 Andrew Victor
*
@@ -113,6 +113,10 @@
#define AT91SAM9260_UHP_BASE 0x00500000 /* USB Host controller */
+#define AT91SAM9XE_FLASH_BASE 0x00200000 /* Internal FLASH base address */
+#define AT91SAM9XE_SRAM_BASE 0x00300000 /* Internal SRAM base address */
+
+
#if 0
/*
* PIO pin definitions (peripheral A/B multiplexing).
diff --git a/include/asm-arm/arch-at91rm9200/at91sam9260_matrix.h b/include/asm-arm/arch-at91/at91sam9260_matrix.h
similarity index 96%
rename from include/asm-arm/arch-at91rm9200/at91sam9260_matrix.h
rename to include/asm-arm/arch-at91/at91sam9260_matrix.h
index 78f6b49..aacb1e9 100644
--- a/include/asm-arm/arch-at91rm9200/at91sam9260_matrix.h
+++ b/include/asm-arm/arch-at91/at91sam9260_matrix.h
@@ -1,5 +1,5 @@
/*
- * include/asm-arm/arch-at91rm9200/at91sam9260_matrix.h
+ * include/asm-arm/arch-at91/at91sam9260_matrix.h
*
* Memory Controllers (MATRIX, EBI) - System peripherals registers.
* Based on AT91SAM9260 datasheet revision B.
@@ -18,7 +18,7 @@
#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */
#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */
#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */
-#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x04) /* Master Configuration Register 5 */
+#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */
#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */
#define AT91_MATRIX_ULBT_INFINITE (0 << 0)
#define AT91_MATRIX_ULBT_SINGLE (1 << 0)
diff --git a/include/asm-arm/arch-at91rm9200/at91sam9261.h b/include/asm-arm/arch-at91/at91sam9261.h
similarity index 99%
rename from include/asm-arm/arch-at91rm9200/at91sam9261.h
rename to include/asm-arm/arch-at91/at91sam9261.h
index 8d39672..01b58ff 100644
--- a/include/asm-arm/arch-at91rm9200/at91sam9261.h
+++ b/include/asm-arm/arch-at91/at91sam9261.h
@@ -1,5 +1,5 @@
/*
- * include/asm-arm/arch-at91rm9200/at91sam9261.h
+ * include/asm-arm/arch-at91/at91sam9261.h
*
* Copyright (C) SAN People
*
diff --git a/include/asm-arm/arch-at91rm9200/at91sam9261_matrix.h b/include/asm-arm/arch-at91/at91sam9261_matrix.h
similarity index 97%
rename from include/asm-arm/arch-at91rm9200/at91sam9261_matrix.h
rename to include/asm-arm/arch-at91/at91sam9261_matrix.h
index ec88efa..6f07242 100644
--- a/include/asm-arm/arch-at91rm9200/at91sam9261_matrix.h
+++ b/include/asm-arm/arch-at91/at91sam9261_matrix.h
@@ -1,5 +1,5 @@
/*
- * include/asm-arm/arch-at91rm9200/at91sam9261_matrix.h
+ * include/asm-arm/arch-at91/at91sam9261_matrix.h
*
* Memory Controllers (MATRIX, EBI) - System peripherals registers.
* Based on AT91SAM9261 datasheet revision D.
diff --git a/include/asm-arm/arch-at91/at91sam9263.h b/include/asm-arm/arch-at91/at91sam9263.h
new file mode 100644
index 0000000..f4af68a
--- /dev/null
+++ b/include/asm-arm/arch-at91/at91sam9263.h
@@ -0,0 +1,131 @@
+/*
+ * include/asm-arm/arch-at91/at91sam9263.h
+ *
+ * (C) 2007 Atmel Corporation.
+ *
+ * Common definitions.
+ * Based on AT91SAM9263 datasheet revision B (Preliminary).
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9263_H
+#define AT91SAM9263_H
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */
+#define AT91_ID_SYS 1 /* System Peripherals */
+#define AT91SAM9263_ID_PIOA 2 /* Parallel IO Controller A */
+#define AT91SAM9263_ID_PIOB 3 /* Parallel IO Controller B */
+#define AT91SAM9263_ID_PIOCDE 4 /* Parallel IO Controller C, D and E */
+#define AT91SAM9263_ID_US0 7 /* USART 0 */
+#define AT91SAM9263_ID_US1 8 /* USART 1 */
+#define AT91SAM9263_ID_US2 9 /* USART 2 */
+#define AT91SAM9263_ID_MCI0 10 /* Multimedia Card Interface 0 */
+#define AT91SAM9263_ID_MCI1 11 /* Multimedia Card Interface 1 */
+#define AT91SAM9263_ID_CAN 12 /* CAN */
+#define AT91SAM9263_ID_TWI 13 /* Two-Wire Interface */
+#define AT91SAM9263_ID_SPI0 14 /* Serial Peripheral Interface 0 */
+#define AT91SAM9263_ID_SPI1 15 /* Serial Peripheral Interface 1 */
+#define AT91SAM9263_ID_SSC0 16 /* Serial Synchronous Controller 0 */
+#define AT91SAM9263_ID_SSC1 17 /* Serial Synchronous Controller 1 */
+#define AT91SAM9263_ID_AC97C 18 /* AC97 Controller */
+#define AT91SAM9263_ID_TCB 19 /* Timer Counter 0, 1 and 2 */
+#define AT91SAM9263_ID_PWMC 20 /* Pulse Width Modulation Controller */
+#define AT91SAM9263_ID_EMAC 21 /* Ethernet */
+#define AT91SAM9263_ID_2DGE 23 /* 2D Graphic Engine */
+#define AT91SAM9263_ID_UDP 24 /* USB Device Port */
+#define AT91SAM9263_ID_ISI 25 /* Image Sensor Interface */
+#define AT91SAM9263_ID_LCDC 26 /* LCD Controller */
+#define AT91SAM9263_ID_DMA 27 /* DMA Controller */
+#define AT91SAM9263_ID_UHP 29 /* USB Host port */
+#define AT91SAM9263_ID_IRQ0 30 /* Advanced Interrupt Controller (IRQ0) */
+#define AT91SAM9263_ID_IRQ1 31 /* Advanced Interrupt Controller (IRQ1) */
+
+
+/*
+ * User Peripheral physical base addresses.
+ */
+#define AT91SAM9263_BASE_UDP 0xfff78000
+#define AT91SAM9263_BASE_TCB0 0xfff7c000
+#define AT91SAM9263_BASE_TC0 0xfff7c000
+#define AT91SAM9263_BASE_TC1 0xfff7c040
+#define AT91SAM9263_BASE_TC2 0xfff7c080
+#define AT91SAM9263_BASE_MCI0 0xfff80000
+#define AT91SAM9263_BASE_MCI1 0xfff84000
+#define AT91SAM9263_BASE_TWI 0xfff88000
+#define AT91SAM9263_BASE_US0 0xfff8c000
+#define AT91SAM9263_BASE_US1 0xfff90000
+#define AT91SAM9263_BASE_US2 0xfff94000
+#define AT91SAM9263_BASE_SSC0 0xfff98000
+#define AT91SAM9263_BASE_SSC1 0xfff9c000
+#define AT91SAM9263_BASE_AC97C 0xfffa0000
+#define AT91SAM9263_BASE_SPI0 0xfffa4000
+#define AT91SAM9263_BASE_SPI1 0xfffa8000
+#define AT91SAM9263_BASE_CAN 0xfffac000
+#define AT91SAM9263_BASE_PWMC 0xfffb8000
+#define AT91SAM9263_BASE_EMAC 0xfffbc000
+#define AT91SAM9263_BASE_ISI 0xfffc4000
+#define AT91SAM9263_BASE_2DGE 0xfffc8000
+#define AT91_BASE_SYS 0xffffe000
+
+/*
+ * System Peripherals (offset from AT91_BASE_SYS)
+ */
+#define AT91_ECC0 (0xffffe000 - AT91_BASE_SYS)
+#define AT91_SDRAMC0 (0xffffe200 - AT91_BASE_SYS)
+#define AT91_SMC0 (0xffffe400 - AT91_BASE_SYS)
+#define AT91_ECC1 (0xffffe600 - AT91_BASE_SYS)
+#define AT91_SDRAMC1 (0xffffe800 - AT91_BASE_SYS)
+#define AT91_SMC1 (0xffffea00 - AT91_BASE_SYS)
+#define AT91_MATRIX (0xffffec00 - AT91_BASE_SYS)
+#define AT91_CCFG (0xffffed10 - AT91_BASE_SYS)
+#define AT91_DBGU (0xffffee00 - AT91_BASE_SYS)
+#define AT91_AIC (0xfffff000 - AT91_BASE_SYS)
+#define AT91_PIOA (0xfffff200 - AT91_BASE_SYS)
+#define AT91_PIOB (0xfffff400 - AT91_BASE_SYS)
+#define AT91_PIOC (0xfffff600 - AT91_BASE_SYS)
+#define AT91_PIOD (0xfffff800 - AT91_BASE_SYS)
+#define AT91_PIOE (0xfffffa00 - AT91_BASE_SYS)
+#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS)
+#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS)
+#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS)
+#define AT91_RTT0 (0xfffffd20 - AT91_BASE_SYS)
+#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS)
+#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS)
+#define AT91_RTT1 (0xfffffd50 - AT91_BASE_SYS)
+#define AT91_GPBR (0xfffffd60 - AT91_BASE_SYS)
+
+#define AT91_SMC AT91_SMC0
+
+/*
+ * Internal Memory.
+ */
+#define AT91SAM9263_SRAM0_BASE 0x00300000 /* Internal SRAM 0 base address */
+#define AT91SAM9263_SRAM0_SIZE (80 * SZ_1K) /* Internal SRAM 0 size (80Kb) */
+
+#define AT91SAM9263_ROM_BASE 0x00400000 /* Internal ROM base address */
+#define AT91SAM9263_ROM_SIZE SZ_128K /* Internal ROM size (128Kb) */
+
+#define AT91SAM9263_SRAM1_BASE 0x00500000 /* Internal SRAM 1 base address */
+#define AT91SAM9263_SRAM1_SIZE SZ_16K /* Internal SRAM 1 size (16Kb) */
+
+#define AT91SAM9263_LCDC_BASE 0x00700000 /* LCD Controller */
+#define AT91SAM9263_DMAC_BASE 0x00800000 /* DMA Controller */
+#define AT91SAM9263_UHP_BASE 0x00a00000 /* USB Host controller */
+
+#if 0
+/*
+ * PIO pin definitions (peripheral A/B multiplexing).
+ */
+
+// TODO: Add
+
+#endif
+
+#endif
diff --git a/include/asm-arm/arch-at91/at91sam9263_matrix.h b/include/asm-arm/arch-at91/at91sam9263_matrix.h
new file mode 100644
index 0000000..6fc6e4b
--- /dev/null
+++ b/include/asm-arm/arch-at91/at91sam9263_matrix.h
@@ -0,0 +1,129 @@
+/*
+ * include/asm-arm/arch-at91/at91sam9263_matrix.h
+ *
+ * Copyright (C) 2006 Atmel Corporation.
+ *
+ * Memory Controllers (MATRIX, EBI) - System peripherals registers.
+ * Based on AT91SAM9263 datasheet revision B (Preliminary).
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9263_MATRIX_H
+#define AT91SAM9263_MATRIX_H
+
+#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */
+#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */
+#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */
+#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */
+#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */
+#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */
+#define AT91_MATRIX_MCFG6 (AT91_MATRIX + 0x18) /* Master Configuration Register 6 */
+#define AT91_MATRIX_MCFG7 (AT91_MATRIX + 0x1C) /* Master Configuration Register 7 */
+#define AT91_MATRIX_MCFG8 (AT91_MATRIX + 0x20) /* Master Configuration Register 8 */
+#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */
+#define AT91_MATRIX_ULBT_INFINITE (0 << 0)
+#define AT91_MATRIX_ULBT_SINGLE (1 << 0)
+#define AT91_MATRIX_ULBT_FOUR (2 << 0)
+#define AT91_MATRIX_ULBT_EIGHT (3 << 0)
+#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0)
+
+#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */
+#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */
+#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */
+#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */
+#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */
+#define AT91_MATRIX_SCFG5 (AT91_MATRIX + 0x54) /* Slave Configuration Register 5 */
+#define AT91_MATRIX_SCFG6 (AT91_MATRIX + 0x58) /* Slave Configuration Register 6 */
+#define AT91_MATRIX_SCFG7 (AT91_MATRIX + 0x5C) /* Slave Configuration Register 7 */
+#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */
+#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */
+#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
+#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
+#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
+#define AT91_MATRIX_FIXED_DEFMSTR (7 << 18) /* Fixed Index of Default Master */
+#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */
+#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24)
+#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24)
+
+#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */
+#define AT91_MATRIX_PRBS0 (AT91_MATRIX + 0x84) /* Priority Register B for Slave 0 */
+#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */
+#define AT91_MATRIX_PRBS1 (AT91_MATRIX + 0x8C) /* Priority Register B for Slave 1 */
+#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */
+#define AT91_MATRIX_PRBS2 (AT91_MATRIX + 0x94) /* Priority Register B for Slave 2 */
+#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */
+#define AT91_MATRIX_PRBS3 (AT91_MATRIX + 0x9C) /* Priority Register B for Slave 3 */
+#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */
+#define AT91_MATRIX_PRBS4 (AT91_MATRIX + 0xA4) /* Priority Register B for Slave 4 */
+#define AT91_MATRIX_PRAS5 (AT91_MATRIX + 0xA8) /* Priority Register A for Slave 5 */
+#define AT91_MATRIX_PRBS5 (AT91_MATRIX + 0xAC) /* Priority Register B for Slave 5 */
+#define AT91_MATRIX_PRAS6 (AT91_MATRIX + 0xB0) /* Priority Register A for Slave 6 */
+#define AT91_MATRIX_PRBS6 (AT91_MATRIX + 0xB4) /* Priority Register B for Slave 6 */
+#define AT91_MATRIX_PRAS7 (AT91_MATRIX + 0xB8) /* Priority Register A for Slave 7 */
+#define AT91_MATRIX_PRBS7 (AT91_MATRIX + 0xBC) /* Priority Register B for Slave 7 */
+#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */
+#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */
+#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */
+#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */
+#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */
+#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */
+#define AT91_MATRIX_M6PR (3 << 24) /* Master 6 Priority */
+#define AT91_MATRIX_M7PR (3 << 28) /* Master 7 Priority */
+#define AT91_MATRIX_M8PR (3 << 0) /* Master 8 Priority (in Register B) */
+
+#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */
+#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
+#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
+#define AT91_MATRIX_RCB2 (1 << 2)
+#define AT91_MATRIX_RCB3 (1 << 3)
+#define AT91_MATRIX_RCB4 (1 << 4)
+#define AT91_MATRIX_RCB5 (1 << 5)
+#define AT91_MATRIX_RCB6 (1 << 6)
+#define AT91_MATRIX_RCB7 (1 << 7)
+#define AT91_MATRIX_RCB8 (1 << 8)
+
+#define AT91_MATRIX_TCMR (AT91_MATRIX + 0x114) /* TCM Configuration Register */
+#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */
+#define AT91_MATRIX_ITCM_0 (0 << 0)
+#define AT91_MATRIX_ITCM_16 (5 << 0)
+#define AT91_MATRIX_ITCM_32 (6 << 0)
+#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */
+#define AT91_MATRIX_DTCM_0 (0 << 4)
+#define AT91_MATRIX_DTCM_16 (5 << 4)
+#define AT91_MATRIX_DTCM_32 (6 << 4)
+
+#define AT91_MATRIX_EBI0CSA (AT91_MATRIX + 0x120) /* EBI0 Chip Select Assignment Register */
+#define AT91_MATRIX_EBI0_CS1A (1 << 1) /* Chip Select 1 Assignment */
+#define AT91_MATRIX_EBI0_CS1A_SMC (0 << 1)
+#define AT91_MATRIX_EBI0_CS1A_SDRAMC (1 << 1)
+#define AT91_MATRIX_EBI0_CS3A (1 << 3) /* Chip Select 3 Assignment */
+#define AT91_MATRIX_EBI0_CS3A_SMC (0 << 3)
+#define AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA (1 << 3)
+#define AT91_MATRIX_EBI0_CS4A (1 << 4) /* Chip Select 4 Assignment */
+#define AT91_MATRIX_EBI0_CS4A_SMC (0 << 4)
+#define AT91_MATRIX_EBI0_CS4A_SMC_CF1 (1 << 4)
+#define AT91_MATRIX_EBI0_CS5A (1 << 5) /* Chip Select 5 Assignment */
+#define AT91_MATRIX_EBI0_CS5A_SMC (0 << 5)
+#define AT91_MATRIX_EBI0_CS5A_SMC_CF2 (1 << 5)
+#define AT91_MATRIX_EBI0_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
+#define AT91_MATRIX_EBI0_VDDIOMSEL (1 << 16) /* Memory voltage selection */
+#define AT91_MATRIX_EBI0_VDDIOMSEL_1_8V (0 << 16)
+#define AT91_MATRIX_EBI0_VDDIOMSEL_3_3V (1 << 16)
+
+#define AT91_MATRIX_EBI1CSA (AT91_MATRIX + 0x124) /* EBI1 Chip Select Assignment Register */
+#define AT91_MATRIX_EBI1_CS1A (1 << 1) /* Chip Select 1 Assignment */
+#define AT91_MATRIX_EBI1_CS1A_SMC (0 << 1)
+#define AT91_MATRIX_EBI1_CS1A_SDRAMC (1 << 1)
+#define AT91_MATRIX_EBI1_CS2A (1 << 3) /* Chip Select 3 Assignment */
+#define AT91_MATRIX_EBI1_CS2A_SMC (0 << 3)
+#define AT91_MATRIX_EBI1_CS2A_SMC_SMARTMEDIA (1 << 3)
+#define AT91_MATRIX_EBI1_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
+#define AT91_MATRIX_EBI1_VDDIOMSEL (1 << 16) /* Memory voltage selection */
+#define AT91_MATRIX_EBI1_VDDIOMSEL_1_8V (0 << 16)
+#define AT91_MATRIX_EBI1_VDDIOMSEL_3_3V (1 << 16)
+
+#endif
diff --git a/include/asm-arm/arch-at91rm9200/at91sam926x_mc.h b/include/asm-arm/arch-at91/at91sam926x_mc.h
similarity index 92%
rename from include/asm-arm/arch-at91rm9200/at91sam926x_mc.h
rename to include/asm-arm/arch-at91/at91sam926x_mc.h
index 972e753..d82631c 100644
--- a/include/asm-arm/arch-at91rm9200/at91sam926x_mc.h
+++ b/include/asm-arm/arch-at91/at91sam926x_mc.h
@@ -1,5 +1,5 @@
/*
- * include/asm-arm/arch-at91rm9200/at91sam926x_mc.h
+ * include/asm-arm/arch-at91/at91sam926x_mc.h
*
* Memory Controllers (SMC, SDRAMC) - System peripherals registers.
* Based on AT91SAM9261 datasheet revision D.
@@ -131,4 +131,11 @@
#define AT91_SMC_PS_16 (2 << 28)
#define AT91_SMC_PS_32 (3 << 28)
+#if defined(AT91_SMC1) /* The AT91SAM9263 has 2 Static Memory contollers */
+#define AT91_SMC1_SETUP(n) (AT91_SMC1 + 0x00 + ((n)*0x10)) /* Setup Register for CS n */
+#define AT91_SMC1_PULSE(n) (AT91_SMC1 + 0x04 + ((n)*0x10)) /* Pulse Register for CS n */
+#define AT91_SMC1_CYCLE(n) (AT91_SMC1 + 0x08 + ((n)*0x10)) /* Cycle Register for CS n */
+#define AT91_SMC1_MODE(n) (AT91_SMC1 + 0x0c + ((n)*0x10)) /* Mode Register for CS n */
+#endif
+
#endif
diff --git a/include/asm-arm/arch-at91rm9200/board.h b/include/asm-arm/arch-at91/board.h
similarity index 92%
rename from include/asm-arm/arch-at91rm9200/board.h
rename to include/asm-arm/arch-at91/board.h
index 768e0fc..7b9903c 100644
--- a/include/asm-arm/arch-at91rm9200/board.h
+++ b/include/asm-arm/arch-at91/board.h
@@ -1,5 +1,5 @@
/*
- * include/asm-arm/arch-at91rm9200/board.h
+ * include/asm-arm/arch-at91/board.h
*
* Copyright (C) 2005 HP Labs
*
@@ -60,7 +60,7 @@
u8 wp_pin; /* (SD) writeprotect detect */
u8 vcc_pin; /* power switching (high == on) */
};
-extern void __init at91_add_device_mmc(struct at91_mmc_data *data);
+extern void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data);
/* Ethernet */
struct at91_eth_data {
@@ -69,9 +69,14 @@
};
extern void __init at91_add_device_eth(struct at91_eth_data *data);
+#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9263)
+#define eth_platform_data at91_eth_data
+#endif
+
/* USB Host */
struct at91_usbh_data {
u8 ports; /* number of ports on root hub */
+ u8 vbus_pin[]; /* port power-control pin */
};
extern void __init at91_add_device_usbh(struct at91_usbh_data *data);
diff --git a/include/asm-arm/arch-at91/cpu.h b/include/asm-arm/arch-at91/cpu.h
new file mode 100644
index 0000000..d464ca5
--- /dev/null
+++ b/include/asm-arm/arch-at91/cpu.h
@@ -0,0 +1,71 @@
+/*
+ * include/asm-arm/arch-at91/cpu.h
+ *
+ * Copyright (C) 2006 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_CPU_H
+#define __ASM_ARCH_CPU_H
+
+#include <asm/hardware.h>
+#include <asm/arch/at91_dbgu.h>
+
+
+#define ARCH_ID_AT91RM9200 0x09290780
+#define ARCH_ID_AT91SAM9260 0x019803a0
+#define ARCH_ID_AT91SAM9261 0x019703a0
+#define ARCH_ID_AT91SAM9263 0x019607a0
+
+#define ARCH_ID_AT91SAM9XE128 0x329973a0
+#define ARCH_ID_AT91SAM9XE256 0x329a93a0
+#define ARCH_ID_AT91SAM9XE512 0x329aa3a0
+
+static inline unsigned long at91_cpu_identify(void)
+{
+ return (at91_sys_read(AT91_DBGU_CIDR) & ~AT91_CIDR_VERSION);
+}
+
+
+#define ARCH_FAMILY_AT91X92 0x09200000
+#define ARCH_FAMILY_AT91SAM9 0x01900000
+#define ARCH_FAMILY_AT91SAM9XE 0x02900000
+
+static inline unsigned long at91_arch_identify(void)
+{
+ return (at91_sys_read(AT91_DBGU_CIDR) & AT91_CIDR_ARCH);
+}
+
+
+#ifdef CONFIG_ARCH_AT91RM9200
+#define cpu_is_at91rm9200() (at91_cpu_identify() == ARCH_ID_AT91RM9200)
+#else
+#define cpu_is_at91rm9200() (0)
+#endif
+
+#ifdef CONFIG_ARCH_AT91SAM9260
+#define cpu_is_at91sam9xe() (at91_arch_identify() == ARCH_FAMILY_AT91SAM9XE)
+#define cpu_is_at91sam9260() ((at91_cpu_identify() == ARCH_ID_AT91SAM9260) || cpu_is_at91sam9xe())
+#else
+#define cpu_is_at91sam9xe() (0)
+#define cpu_is_at91sam9260() (0)
+#endif
+
+#ifdef CONFIG_ARCH_AT91SAM9261
+#define cpu_is_at91sam9261() (at91_cpu_identify() == ARCH_ID_AT91SAM9261)
+#else
+#define cpu_is_at91sam9261() (0)
+#endif
+
+#ifdef CONFIG_ARCH_AT91SAM9263
+#define cpu_is_at91sam9263() (at91_cpu_identify() == ARCH_ID_AT91SAM9263)
+#else
+#define cpu_is_at91sam9263() (0)
+#endif
+
+#endif
diff --git a/include/asm-arm/arch-at91/debug-macro.S b/include/asm-arm/arch-at91/debug-macro.S
new file mode 100644
index 0000000..13e9f5e
--- /dev/null
+++ b/include/asm-arm/arch-at91/debug-macro.S
@@ -0,0 +1,39 @@
+/*
+ * include/asm-arm/arch-at91/debug-macro.S
+ *
+ * Copyright (C) 2003-2005 SAN People
+ *
+ * Debugging macro include header
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <asm/hardware.h>
+#include <asm/arch/at91_dbgu.h>
+
+ .macro addruart,rx
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1 @ MMU enabled?
+ ldreq \rx, =(AT91_BASE_SYS + AT91_DBGU) @ System peripherals (phys address)
+ ldrne \rx, =(AT91_VA_BASE_SYS + AT91_DBGU) @ System peripherals (virt address)
+ .endm
+
+ .macro senduart,rd,rx
+ strb \rd, [\rx, #(AT91_DBGU_THR - AT91_DBGU)] @ Write to Transmitter Holding Register
+ .endm
+
+ .macro waituart,rd,rx
+1001: ldr \rd, [\rx, #(AT91_DBGU_SR - AT91_DBGU)] @ Read Status Register
+ tst \rd, #AT91_DBGU_TXRDY @ DBGU_TXRDY = 1 when ready to transmit
+ beq 1001b
+ .endm
+
+ .macro busyuart,rd,rx
+1001: ldr \rd, [\rx, #(AT91_DBGU_SR - AT91_DBGU)] @ Read Status Register
+ tst \rd, #AT91_DBGU_TXEMPTY @ DBGU_TXEMPTY = 1 when transmission complete
+ beq 1001b
+ .endm
+
diff --git a/include/asm-arm/arch-at91rm9200/dma.h b/include/asm-arm/arch-at91/dma.h
similarity index 94%
rename from include/asm-arm/arch-at91rm9200/dma.h
rename to include/asm-arm/arch-at91/dma.h
index 22c1dfd..7745654 100644
--- a/include/asm-arm/arch-at91rm9200/dma.h
+++ b/include/asm-arm/arch-at91/dma.h
@@ -1,5 +1,5 @@
/*
- * include/asm-arm/arch-at91rm9200/dma.h
+ * include/asm-arm/arch-at91/dma.h
*
* Copyright (C) 2003 SAN People
*
diff --git a/include/asm-arm/arch-at91/entry-macro.S b/include/asm-arm/arch-at91/entry-macro.S
new file mode 100644
index 0000000..76c8ccc
--- /dev/null
+++ b/include/asm-arm/arch-at91/entry-macro.S
@@ -0,0 +1,26 @@
+/*
+ * include/asm-arm/arch-at91/entry-macro.S
+ *
+ * Copyright (C) 2003-2005 SAN People
+ *
+ * Low-level IRQ helper macros for AT91RM9200 platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <asm/hardware.h>
+#include <asm/arch/at91_aic.h>
+
+ .macro disable_fiq
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+ ldr \base, =(AT91_VA_BASE_SYS + AT91_AIC) @ base virtual address of AIC peripheral
+ ldr \irqnr, [\base, #(AT91_AIC_IVR - AT91_AIC)] @ read IRQ vector register: de-asserts nIRQ to processor (and clears interrupt)
+ ldr \irqstat, [\base, #(AT91_AIC_ISR - AT91_AIC)] @ read interrupt source number
+ teq \irqstat, #0 @ ISR is 0 when no current interrupt, or spurious interrupt
+ streq \tmp, [\base, #(AT91_AIC_EOICR - AT91_AIC)] @ not going to be handled further, then ACK it now.
+ .endm
+
diff --git a/include/asm-arm/arch-at91rm9200/gpio.h b/include/asm-arm/arch-at91/gpio.h
similarity index 84%
rename from include/asm-arm/arch-at91rm9200/gpio.h
rename to include/asm-arm/arch-at91/gpio.h
index e09d652..98ad211 100644
--- a/include/asm-arm/arch-at91rm9200/gpio.h
+++ b/include/asm-arm/arch-at91/gpio.h
@@ -1,5 +1,5 @@
/*
- * include/asm-arm/arch-at91rm9200/gpio.h
+ * include/asm-arm/arch-at91/gpio.h
*
* Copyright (C) 2005 HP Labs
*
@@ -17,7 +17,7 @@
#define PIN_BASE NR_AIC_IRQS
-#define MAX_GPIO_BANKS 4
+#define MAX_GPIO_BANKS 5
/* these pin numbers double as IRQ numbers, like AT91xxx_ID_* values */
@@ -26,37 +26,31 @@
#define AT91_PIN_PA2 (PIN_BASE + 0x00 + 2)
#define AT91_PIN_PA3 (PIN_BASE + 0x00 + 3)
#define AT91_PIN_PA4 (PIN_BASE + 0x00 + 4)
-
#define AT91_PIN_PA5 (PIN_BASE + 0x00 + 5)
#define AT91_PIN_PA6 (PIN_BASE + 0x00 + 6)
#define AT91_PIN_PA7 (PIN_BASE + 0x00 + 7)
#define AT91_PIN_PA8 (PIN_BASE + 0x00 + 8)
#define AT91_PIN_PA9 (PIN_BASE + 0x00 + 9)
-
#define AT91_PIN_PA10 (PIN_BASE + 0x00 + 10)
#define AT91_PIN_PA11 (PIN_BASE + 0x00 + 11)
#define AT91_PIN_PA12 (PIN_BASE + 0x00 + 12)
#define AT91_PIN_PA13 (PIN_BASE + 0x00 + 13)
#define AT91_PIN_PA14 (PIN_BASE + 0x00 + 14)
-
#define AT91_PIN_PA15 (PIN_BASE + 0x00 + 15)
#define AT91_PIN_PA16 (PIN_BASE + 0x00 + 16)
#define AT91_PIN_PA17 (PIN_BASE + 0x00 + 17)
#define AT91_PIN_PA18 (PIN_BASE + 0x00 + 18)
#define AT91_PIN_PA19 (PIN_BASE + 0x00 + 19)
-
#define AT91_PIN_PA20 (PIN_BASE + 0x00 + 20)
#define AT91_PIN_PA21 (PIN_BASE + 0x00 + 21)
#define AT91_PIN_PA22 (PIN_BASE + 0x00 + 22)
#define AT91_PIN_PA23 (PIN_BASE + 0x00 + 23)
#define AT91_PIN_PA24 (PIN_BASE + 0x00 + 24)
-
#define AT91_PIN_PA25 (PIN_BASE + 0x00 + 25)
#define AT91_PIN_PA26 (PIN_BASE + 0x00 + 26)
#define AT91_PIN_PA27 (PIN_BASE + 0x00 + 27)
#define AT91_PIN_PA28 (PIN_BASE + 0x00 + 28)
#define AT91_PIN_PA29 (PIN_BASE + 0x00 + 29)
-
#define AT91_PIN_PA30 (PIN_BASE + 0x00 + 30)
#define AT91_PIN_PA31 (PIN_BASE + 0x00 + 31)
@@ -65,37 +59,31 @@
#define AT91_PIN_PB2 (PIN_BASE + 0x20 + 2)
#define AT91_PIN_PB3 (PIN_BASE + 0x20 + 3)
#define AT91_PIN_PB4 (PIN_BASE + 0x20 + 4)
-
#define AT91_PIN_PB5 (PIN_BASE + 0x20 + 5)
#define AT91_PIN_PB6 (PIN_BASE + 0x20 + 6)
#define AT91_PIN_PB7 (PIN_BASE + 0x20 + 7)
#define AT91_PIN_PB8 (PIN_BASE + 0x20 + 8)
#define AT91_PIN_PB9 (PIN_BASE + 0x20 + 9)
-
#define AT91_PIN_PB10 (PIN_BASE + 0x20 + 10)
#define AT91_PIN_PB11 (PIN_BASE + 0x20 + 11)
#define AT91_PIN_PB12 (PIN_BASE + 0x20 + 12)
#define AT91_PIN_PB13 (PIN_BASE + 0x20 + 13)
#define AT91_PIN_PB14 (PIN_BASE + 0x20 + 14)
-
#define AT91_PIN_PB15 (PIN_BASE + 0x20 + 15)
#define AT91_PIN_PB16 (PIN_BASE + 0x20 + 16)
#define AT91_PIN_PB17 (PIN_BASE + 0x20 + 17)
#define AT91_PIN_PB18 (PIN_BASE + 0x20 + 18)
#define AT91_PIN_PB19 (PIN_BASE + 0x20 + 19)
-
#define AT91_PIN_PB20 (PIN_BASE + 0x20 + 20)
#define AT91_PIN_PB21 (PIN_BASE + 0x20 + 21)
#define AT91_PIN_PB22 (PIN_BASE + 0x20 + 22)
#define AT91_PIN_PB23 (PIN_BASE + 0x20 + 23)
#define AT91_PIN_PB24 (PIN_BASE + 0x20 + 24)
-
#define AT91_PIN_PB25 (PIN_BASE + 0x20 + 25)
#define AT91_PIN_PB26 (PIN_BASE + 0x20 + 26)
#define AT91_PIN_PB27 (PIN_BASE + 0x20 + 27)
#define AT91_PIN_PB28 (PIN_BASE + 0x20 + 28)
#define AT91_PIN_PB29 (PIN_BASE + 0x20 + 29)
-
#define AT91_PIN_PB30 (PIN_BASE + 0x20 + 30)
#define AT91_PIN_PB31 (PIN_BASE + 0x20 + 31)
@@ -104,37 +92,31 @@
#define AT91_PIN_PC2 (PIN_BASE + 0x40 + 2)
#define AT91_PIN_PC3 (PIN_BASE + 0x40 + 3)
#define AT91_PIN_PC4 (PIN_BASE + 0x40 + 4)
-
#define AT91_PIN_PC5 (PIN_BASE + 0x40 + 5)
#define AT91_PIN_PC6 (PIN_BASE + 0x40 + 6)
#define AT91_PIN_PC7 (PIN_BASE + 0x40 + 7)
#define AT91_PIN_PC8 (PIN_BASE + 0x40 + 8)
#define AT91_PIN_PC9 (PIN_BASE + 0x40 + 9)
-
#define AT91_PIN_PC10 (PIN_BASE + 0x40 + 10)
#define AT91_PIN_PC11 (PIN_BASE + 0x40 + 11)
#define AT91_PIN_PC12 (PIN_BASE + 0x40 + 12)
#define AT91_PIN_PC13 (PIN_BASE + 0x40 + 13)
#define AT91_PIN_PC14 (PIN_BASE + 0x40 + 14)
-
#define AT91_PIN_PC15 (PIN_BASE + 0x40 + 15)
#define AT91_PIN_PC16 (PIN_BASE + 0x40 + 16)
#define AT91_PIN_PC17 (PIN_BASE + 0x40 + 17)
#define AT91_PIN_PC18 (PIN_BASE + 0x40 + 18)
#define AT91_PIN_PC19 (PIN_BASE + 0x40 + 19)
-
#define AT91_PIN_PC20 (PIN_BASE + 0x40 + 20)
#define AT91_PIN_PC21 (PIN_BASE + 0x40 + 21)
#define AT91_PIN_PC22 (PIN_BASE + 0x40 + 22)
#define AT91_PIN_PC23 (PIN_BASE + 0x40 + 23)
#define AT91_PIN_PC24 (PIN_BASE + 0x40 + 24)
-
#define AT91_PIN_PC25 (PIN_BASE + 0x40 + 25)
#define AT91_PIN_PC26 (PIN_BASE + 0x40 + 26)
#define AT91_PIN_PC27 (PIN_BASE + 0x40 + 27)
#define AT91_PIN_PC28 (PIN_BASE + 0x40 + 28)
#define AT91_PIN_PC29 (PIN_BASE + 0x40 + 29)
-
#define AT91_PIN_PC30 (PIN_BASE + 0x40 + 30)
#define AT91_PIN_PC31 (PIN_BASE + 0x40 + 31)
@@ -143,40 +125,67 @@
#define AT91_PIN_PD2 (PIN_BASE + 0x60 + 2)
#define AT91_PIN_PD3 (PIN_BASE + 0x60 + 3)
#define AT91_PIN_PD4 (PIN_BASE + 0x60 + 4)
-
#define AT91_PIN_PD5 (PIN_BASE + 0x60 + 5)
#define AT91_PIN_PD6 (PIN_BASE + 0x60 + 6)
#define AT91_PIN_PD7 (PIN_BASE + 0x60 + 7)
#define AT91_PIN_PD8 (PIN_BASE + 0x60 + 8)
#define AT91_PIN_PD9 (PIN_BASE + 0x60 + 9)
-
#define AT91_PIN_PD10 (PIN_BASE + 0x60 + 10)
#define AT91_PIN_PD11 (PIN_BASE + 0x60 + 11)
#define AT91_PIN_PD12 (PIN_BASE + 0x60 + 12)
#define AT91_PIN_PD13 (PIN_BASE + 0x60 + 13)
#define AT91_PIN_PD14 (PIN_BASE + 0x60 + 14)
-
#define AT91_PIN_PD15 (PIN_BASE + 0x60 + 15)
#define AT91_PIN_PD16 (PIN_BASE + 0x60 + 16)
#define AT91_PIN_PD17 (PIN_BASE + 0x60 + 17)
#define AT91_PIN_PD18 (PIN_BASE + 0x60 + 18)
#define AT91_PIN_PD19 (PIN_BASE + 0x60 + 19)
-
#define AT91_PIN_PD20 (PIN_BASE + 0x60 + 20)
#define AT91_PIN_PD21 (PIN_BASE + 0x60 + 21)
#define AT91_PIN_PD22 (PIN_BASE + 0x60 + 22)
#define AT91_PIN_PD23 (PIN_BASE + 0x60 + 23)
#define AT91_PIN_PD24 (PIN_BASE + 0x60 + 24)
-
#define AT91_PIN_PD25 (PIN_BASE + 0x60 + 25)
#define AT91_PIN_PD26 (PIN_BASE + 0x60 + 26)
#define AT91_PIN_PD27 (PIN_BASE + 0x60 + 27)
#define AT91_PIN_PD28 (PIN_BASE + 0x60 + 28)
#define AT91_PIN_PD29 (PIN_BASE + 0x60 + 29)
-
#define AT91_PIN_PD30 (PIN_BASE + 0x60 + 30)
#define AT91_PIN_PD31 (PIN_BASE + 0x60 + 31)
+#define AT91_PIN_PE0 (PIN_BASE + 0x80 + 0)
+#define AT91_PIN_PE1 (PIN_BASE + 0x80 + 1)
+#define AT91_PIN_PE2 (PIN_BASE + 0x80 + 2)
+#define AT91_PIN_PE3 (PIN_BASE + 0x80 + 3)
+#define AT91_PIN_PE4 (PIN_BASE + 0x80 + 4)
+#define AT91_PIN_PE5 (PIN_BASE + 0x80 + 5)
+#define AT91_PIN_PE6 (PIN_BASE + 0x80 + 6)
+#define AT91_PIN_PE7 (PIN_BASE + 0x80 + 7)
+#define AT91_PIN_PE8 (PIN_BASE + 0x80 + 8)
+#define AT91_PIN_PE9 (PIN_BASE + 0x80 + 9)
+#define AT91_PIN_PE10 (PIN_BASE + 0x80 + 10)
+#define AT91_PIN_PE11 (PIN_BASE + 0x80 + 11)
+#define AT91_PIN_PE12 (PIN_BASE + 0x80 + 12)
+#define AT91_PIN_PE13 (PIN_BASE + 0x80 + 13)
+#define AT91_PIN_PE14 (PIN_BASE + 0x80 + 14)
+#define AT91_PIN_PE15 (PIN_BASE + 0x80 + 15)
+#define AT91_PIN_PE16 (PIN_BASE + 0x80 + 16)
+#define AT91_PIN_PE17 (PIN_BASE + 0x80 + 17)
+#define AT91_PIN_PE18 (PIN_BASE + 0x80 + 18)
+#define AT91_PIN_PE19 (PIN_BASE + 0x80 + 19)
+#define AT91_PIN_PE20 (PIN_BASE + 0x80 + 20)
+#define AT91_PIN_PE21 (PIN_BASE + 0x80 + 21)
+#define AT91_PIN_PE22 (PIN_BASE + 0x80 + 22)
+#define AT91_PIN_PE23 (PIN_BASE + 0x80 + 23)
+#define AT91_PIN_PE24 (PIN_BASE + 0x80 + 24)
+#define AT91_PIN_PE25 (PIN_BASE + 0x80 + 25)
+#define AT91_PIN_PE26 (PIN_BASE + 0x80 + 26)
+#define AT91_PIN_PE27 (PIN_BASE + 0x80 + 27)
+#define AT91_PIN_PE28 (PIN_BASE + 0x80 + 28)
+#define AT91_PIN_PE29 (PIN_BASE + 0x80 + 29)
+#define AT91_PIN_PE30 (PIN_BASE + 0x80 + 30)
+#define AT91_PIN_PE31 (PIN_BASE + 0x80 + 31)
+
#ifndef __ASSEMBLY__
/* setup setup routines, called from board init or driver probe() */
extern int __init_or_module at91_set_GPIO_periph(unsigned pin, int use_pullup);
diff --git a/include/asm-arm/arch-at91rm9200/hardware.h b/include/asm-arm/arch-at91/hardware.h
similarity index 86%
rename from include/asm-arm/arch-at91rm9200/hardware.h
rename to include/asm-arm/arch-at91/hardware.h
index 9ea5bfe..eaaf1c1 100644
--- a/include/asm-arm/arch-at91rm9200/hardware.h
+++ b/include/asm-arm/arch-at91/hardware.h
@@ -1,5 +1,5 @@
/*
- * include/asm-arm/arch-at91rm9200/hardware.h
+ * include/asm-arm/arch-at91/hardware.h
*
* Copyright (C) 2003 SAN People
* Copyright (C) 2003 ATMEL
@@ -22,21 +22,23 @@
#include <asm/arch/at91sam9260.h>
#elif defined(CONFIG_ARCH_AT91SAM9261)
#include <asm/arch/at91sam9261.h>
+#elif defined(CONFIG_ARCH_AT91SAM9263)
+#include <asm/arch/at91sam9263.h>
#else
#error "Unsupported AT91 processor"
#endif
/*
- * Remap the peripherals from address 0xFFFA0000 .. 0xFFFFFFFF
- * to 0xFEFA0000 .. 0xFF000000. (384Kb)
+ * Remap the peripherals from address 0xFFF78000 .. 0xFFFFFFFF
+ * to 0xFEF78000 .. 0xFF000000. (5444Kb)
*/
-#define AT91_IO_PHYS_BASE 0xFFFA0000
+#define AT91_IO_PHYS_BASE 0xFFF78000
#define AT91_IO_SIZE (0xFFFFFFFF - AT91_IO_PHYS_BASE + 1)
#define AT91_IO_VIRT_BASE (0xFF000000 - AT91_IO_SIZE)
/* Convert a physical IO address to virtual IO address */
-#define AT91_IO_P2V(x) ((x) - AT91_IO_PHYS_BASE + AT91_IO_VIRT_BASE)
+#define AT91_IO_P2V(x) ((x) - AT91_IO_PHYS_BASE + AT91_IO_VIRT_BASE)
/*
* Virtual to Physical Address mapping for IO devices.
diff --git a/include/asm-arm/arch-at91rm9200/io.h b/include/asm-arm/arch-at91/io.h
similarity index 95%
rename from include/asm-arm/arch-at91rm9200/io.h
rename to include/asm-arm/arch-at91/io.h
index 88fd1be..401f327 100644
--- a/include/asm-arm/arch-at91rm9200/io.h
+++ b/include/asm-arm/arch-at91/io.h
@@ -1,5 +1,5 @@
/*
- * include/asm-arm/arch-at91rm9200/io.h
+ * include/asm-arm/arch-at91/io.h
*
* Copyright (C) 2003 SAN People
*
diff --git a/include/asm-arm/arch-at91rm9200/irqs.h b/include/asm-arm/arch-at91/irqs.h
similarity index 90%
rename from include/asm-arm/arch-at91rm9200/irqs.h
rename to include/asm-arm/arch-at91/irqs.h
index c0679ea..1ffa3bb 100644
--- a/include/asm-arm/arch-at91rm9200/irqs.h
+++ b/include/asm-arm/arch-at91/irqs.h
@@ -1,5 +1,5 @@
/*
- * include/asm-arm/arch-at91rm9200/irqs.h
+ * include/asm-arm/arch-at91/irqs.h
*
* Copyright (C) 2004 SAN People
*
@@ -37,8 +37,8 @@
* IRQ interrupt symbols are the AT91xxx_ID_* symbols
* for IRQs handled directly through the AIC, or else the AT91_PIN_*
* symbols in gpio.h for ones handled indirectly as GPIOs.
- * We make provision for 4 banks of GPIO.
+ * We make provision for 5 banks of GPIO.
*/
-#define NR_IRQS (NR_AIC_IRQS + (4 * 32))
+#define NR_IRQS (NR_AIC_IRQS + (5 * 32))
#endif
diff --git a/include/asm-arm/arch-at91rm9200/memory.h b/include/asm-arm/arch-at91/memory.h
similarity index 96%
rename from include/asm-arm/arch-at91rm9200/memory.h
rename to include/asm-arm/arch-at91/memory.h
index f985069..4835d67 100644
--- a/include/asm-arm/arch-at91rm9200/memory.h
+++ b/include/asm-arm/arch-at91/memory.h
@@ -1,5 +1,5 @@
/*
- * include/asm-arm/arch-at91rm9200/memory.h
+ * include/asm-arm/arch-at91/memory.h
*
* Copyright (C) 2004 SAN People
*
diff --git a/include/asm-arm/arch-at91rm9200/system.h b/include/asm-arm/arch-at91/system.h
similarity index 96%
rename from include/asm-arm/arch-at91rm9200/system.h
rename to include/asm-arm/arch-at91/system.h
index 9c67130..6bf8460 100644
--- a/include/asm-arm/arch-at91rm9200/system.h
+++ b/include/asm-arm/arch-at91/system.h
@@ -1,5 +1,5 @@
/*
- * include/asm-arm/arch-at91rm9200/system.h
+ * include/asm-arm/arch-at91/system.h
*
* Copyright (C) 2003 SAN People
*
diff --git a/include/asm-arm/arch-at91rm9200/timex.h b/include/asm-arm/arch-at91/timex.h
similarity index 86%
rename from include/asm-arm/arch-at91rm9200/timex.h
rename to include/asm-arm/arch-at91/timex.h
index faeca45..f41636d 100644
--- a/include/asm-arm/arch-at91rm9200/timex.h
+++ b/include/asm-arm/arch-at91/timex.h
@@ -1,5 +1,5 @@
/*
- * include/asm-arm/arch-at91rm9200/timex.h
+ * include/asm-arm/arch-at91/timex.h
*
* Copyright (C) 2003 SAN People
*
@@ -32,6 +32,11 @@
#define AT91SAM9_MASTER_CLOCK 99300000
#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16)
+#elif defined(CONFIG_ARCH_AT91SAM9263)
+
+#define AT91SAM9_MASTER_CLOCK 99959500
+#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16)
+
#endif
#endif
diff --git a/include/asm-arm/arch-at91rm9200/uncompress.h b/include/asm-arm/arch-at91/uncompress.h
similarity index 96%
rename from include/asm-arm/arch-at91rm9200/uncompress.h
rename to include/asm-arm/arch-at91/uncompress.h
index 34b4b93..a193d28 100644
--- a/include/asm-arm/arch-at91rm9200/uncompress.h
+++ b/include/asm-arm/arch-at91/uncompress.h
@@ -1,5 +1,5 @@
/*
- * include/asm-arm/arch-at91rm9200/uncompress.h
+ * include/asm-arm/arch-at91/uncompress.h
*
* Copyright (C) 2003 SAN People
*
diff --git a/include/asm-arm/arch-at91rm9200/vmalloc.h b/include/asm-arm/arch-at91/vmalloc.h
similarity index 94%
rename from include/asm-arm/arch-at91rm9200/vmalloc.h
rename to include/asm-arm/arch-at91/vmalloc.h
index 0a23b8c..bb05e70 100644
--- a/include/asm-arm/arch-at91rm9200/vmalloc.h
+++ b/include/asm-arm/arch-at91/vmalloc.h
@@ -1,5 +1,5 @@
/*
- * include/asm-arm/arch-at91rm9200/vmalloc.h
+ * include/asm-arm/arch-at91/vmalloc.h
*
* Copyright (C) 2003 SAN People
*
diff --git a/include/asm-arm/arch-at91rm9200/at91_pdc.h b/include/asm-arm/arch-at91rm9200/at91_pdc.h
deleted file mode 100644
index 79d6e02..0000000
--- a/include/asm-arm/arch-at91rm9200/at91_pdc.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/at91_pdc.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Peripheral Data Controller (PDC) registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_PDC_H
-#define AT91_PDC_H
-
-#define AT91_PDC_RPR 0x100 /* Receive Pointer Register */
-#define AT91_PDC_RCR 0x104 /* Receive Counter Register */
-#define AT91_PDC_TPR 0x108 /* Transmit Pointer Register */
-#define AT91_PDC_TCR 0x10c /* Transmit Counter Register */
-#define AT91_PDC_RNPR 0x110 /* Receive Next Pointer Register */
-#define AT91_PDC_RNCR 0x114 /* Receive Next Counter Register */
-#define AT91_PDC_TNPR 0x118 /* Transmit Next Pointer Register */
-#define AT91_PDC_TNCR 0x11c /* Transmit Next Counter Register */
-
-#define AT91_PDC_PTCR 0x120 /* Transfer Control Register */
-#define AT91_PDC_RXTEN (1 << 0) /* Receiver Transfer Enable */
-#define AT91_PDC_RXTDIS (1 << 1) /* Receiver Transfer Disable */
-#define AT91_PDC_TXTEN (1 << 8) /* Transmitter Transfer Enable */
-#define AT91_PDC_TXTDIS (1 << 9) /* Transmitter Transfer Disable */
-
-#define AT91_PDC_PTSR 0x124 /* Transfer Status Register */
-
-#endif
diff --git a/include/asm-arm/arch-at91rm9200/cpu.h b/include/asm-arm/arch-at91rm9200/cpu.h
deleted file mode 100644
index 6f8d09b..0000000
--- a/include/asm-arm/arch-at91rm9200/cpu.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/cpu.h
- *
- * Copyright (C) 2006 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#ifndef __ASM_ARCH_CPU_H
-#define __ASM_ARCH_CPU_H
-
-#include <asm/hardware.h>
-#include <asm/arch/at91_dbgu.h>
-
-
-#define ARCH_ID_AT91RM9200 0x09290780
-#define ARCH_ID_AT91SAM9260 0x019803a0
-#define ARCH_ID_AT91SAM9261 0x019703a0
-
-
-static inline unsigned long at91_cpu_identify(void)
-{
- return (at91_sys_read(AT91_DBGU_CIDR) & ~AT91_CIDR_VERSION);
-}
-
-
-#ifdef CONFIG_ARCH_AT91RM9200
-#define cpu_is_at91rm9200() (at91_cpu_identify() == ARCH_ID_AT91RM9200)
-#else
-#define cpu_is_at91rm9200() (0)
-#endif
-
-#ifdef CONFIG_ARCH_AT91SAM9260
-#define cpu_is_at91sam9260() (at91_cpu_identify() == ARCH_ID_AT91SAM9260)
-#else
-#define cpu_is_at91sam9260() (0)
-#endif
-
-#ifdef CONFIG_ARCH_AT91SAM9261
-#define cpu_is_at91sam9261() (at91_cpu_identify() == ARCH_ID_AT91SAM9261)
-#else
-#define cpu_is_at91sam9261() (0)
-#endif
-
-#endif
diff --git a/include/asm-arm/arch-at91rm9200/debug-macro.S b/include/asm-arm/arch-at91rm9200/debug-macro.S
deleted file mode 100644
index 85cdadf..0000000
--- a/include/asm-arm/arch-at91rm9200/debug-macro.S
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/debug-macro.S
- *
- * Copyright (C) 2003-2005 SAN People
- *
- * Debugging macro include header
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include <asm/hardware.h>
-#include <asm/arch/at91_dbgu.h>
-
- .macro addruart,rx
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1 @ MMU enabled?
- ldreq \rx, =AT91_BASE_SYS @ System peripherals (phys address)
- ldrne \rx, =AT91_VA_BASE_SYS @ System peripherals (virt address)
- .endm
-
- .macro senduart,rd,rx
- strb \rd, [\rx, #AT91_DBGU_THR] @ Write to Transmitter Holding Register
- .endm
-
- .macro waituart,rd,rx
-1001: ldr \rd, [\rx, #AT91_DBGU_SR] @ Read Status Register
- tst \rd, #AT91_DBGU_TXRDY @ DBGU_TXRDY = 1 when ready to transmit
- beq 1001b
- .endm
-
- .macro busyuart,rd,rx
-1001: ldr \rd, [\rx, #AT91_DBGU_SR] @ Read Status Register
- tst \rd, #AT91_DBGU_TXEMPTY @ DBGU_TXEMPTY = 1 when transmission complete
- beq 1001b
- .endm
-
diff --git a/include/asm-arm/arch-at91rm9200/entry-macro.S b/include/asm-arm/arch-at91rm9200/entry-macro.S
deleted file mode 100644
index 57248a7..0000000
--- a/include/asm-arm/arch-at91rm9200/entry-macro.S
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/entry-macro.S
- *
- * Copyright (C) 2003-2005 SAN People
- *
- * Low-level IRQ helper macros for AT91RM9200 platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <asm/hardware.h>
-#include <asm/arch/at91_aic.h>
-
- .macro disable_fiq
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- ldr \base, =(AT91_VA_BASE_SYS) @ base virtual address of SYS peripherals
- ldr \irqnr, [\base, #AT91_AIC_IVR] @ read IRQ vector register: de-asserts nIRQ to processor (and clears interrupt)
- ldr \irqstat, [\base, #AT91_AIC_ISR] @ read interrupt source number
- teq \irqstat, #0 @ ISR is 0 when no current interrupt, or spurious interrupt
- streq \tmp, [\base, #AT91_AIC_EOICR] @ not going to be handled further, then ACK it now.
- .endm
-
diff --git a/include/asm-arm/arch-ep93xx/ep93xx-regs.h b/include/asm-arm/arch-ep93xx/ep93xx-regs.h
index 593f562..625c6f0 100644
--- a/include/asm-arm/arch-ep93xx/ep93xx-regs.h
+++ b/include/asm-arm/arch-ep93xx/ep93xx-regs.h
@@ -73,6 +73,11 @@
#define EP93XX_GPIO_BASE (EP93XX_APB_VIRT_BASE + 0x00040000)
#define EP93XX_GPIO_REG(x) (EP93XX_GPIO_BASE + (x))
+#define EP93XX_GPIO_F_INT_TYPE1 EP93XX_GPIO_REG(0x4c)
+#define EP93XX_GPIO_F_INT_TYPE2 EP93XX_GPIO_REG(0x50)
+#define EP93XX_GPIO_F_INT_ACK EP93XX_GPIO_REG(0x54)
+#define EP93XX_GPIO_F_INT_ENABLE EP93XX_GPIO_REG(0x58)
+#define EP93XX_GPIO_F_INT_STATUS EP93XX_GPIO_REG(0x5c)
#define EP93XX_GPIO_A_INT_TYPE1 EP93XX_GPIO_REG(0x90)
#define EP93XX_GPIO_A_INT_TYPE2 EP93XX_GPIO_REG(0x94)
#define EP93XX_GPIO_A_INT_ACK EP93XX_GPIO_REG(0x98)
diff --git a/include/asm-arm/arch-ep93xx/irqs.h b/include/asm-arm/arch-ep93xx/irqs.h
index ae532e304..2a8c636 100644
--- a/include/asm-arm/arch-ep93xx/irqs.h
+++ b/include/asm-arm/arch-ep93xx/irqs.h
@@ -67,9 +67,13 @@
#define IRQ_EP93XX_SAI 60
#define EP93XX_VIC2_VALID_IRQ_MASK 0x1fffffff
-#define IRQ_EP93XX_GPIO(x) (64 + (x))
+/*
+ * Map GPIO A0..A7 to irq 64..71, B0..B7 to 72..79, and
+ * F0..F7 to 80..87.
+ */
+#define IRQ_EP93XX_GPIO(x) (64 + (((x) + (((x) >> 2) & 8)) & 0x1f))
-#define NR_EP93XX_IRQS IRQ_EP93XX_GPIO(16)
+#define NR_EP93XX_IRQS (64 + 24)
#define EP93XX_BOARD_IRQ(x) (NR_EP93XX_IRQS + (x))
#define EP93XX_BOARD_IRQS 32
diff --git a/include/asm-arm/arch-ep93xx/platform.h b/include/asm-arm/arch-ep93xx/platform.h
index b4a8deb..44eccec 100644
--- a/include/asm-arm/arch-ep93xx/platform.h
+++ b/include/asm-arm/arch-ep93xx/platform.h
@@ -8,7 +8,6 @@
void ep93xx_init_irq(void);
void ep93xx_init_time(unsigned long);
void ep93xx_init_devices(void);
-void ep93xx_clock_init(void);
extern struct sys_timer ep93xx_timer;
struct ep93xx_eth_data
diff --git a/include/asm-arm/arch-imx/entry-macro.S b/include/asm-arm/arch-imx/entry-macro.S
index 3b9ef69..61bb0bd 100644
--- a/include/asm-arm/arch-imx/entry-macro.S
+++ b/include/asm-arm/arch-imx/entry-macro.S
@@ -13,19 +13,13 @@
.endm
#define AITC_NIVECSR 0x40
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- ldr \irqstat, =IO_ADDRESS(IMX_AITC_BASE)
+ ldr \base, =IO_ADDRESS(IMX_AITC_BASE)
@ Load offset & priority of the highest priority
@ interrupt pending.
- ldr \irqnr, [\irqstat, #AITC_NIVECSR]
+ ldr \irqstat, [\base, #AITC_NIVECSR]
@ Shift off the priority leaving the offset or
- @ "interrupt number"
- mov \irqnr, \irqnr, lsr #16
- ldr \irqstat, =1 @ dummy compare
- ldr \base, =0xFFFF // invalid interrupt
- cmp \irqnr, \base
- bne 1001f
- ldr \irqstat, =0
-1001:
- tst \irqstat, #1 @ to make the condition code = TRUE
+ @ "interrupt number", use arithmetic shift to
+ @ transform illegal source (0xffff) as -1
+ mov \irqnr, \irqstat, asr #16
+ adds \tmp, \irqnr, #1
.endm
-
diff --git a/include/asm-arm/arch-iop32x/io.h b/include/asm-arm/arch-iop32x/io.h
index 12d9ee0..5f570a5 100644
--- a/include/asm-arm/arch-iop32x/io.h
+++ b/include/asm-arm/arch-iop32x/io.h
@@ -13,10 +13,16 @@
#include <asm/hardware.h>
-#define IO_SPACE_LIMIT 0xffffffff
+extern void __iomem * __ioremap(unsigned long, size_t, unsigned long);
+extern void __iomem *__iop3xx_ioremap(unsigned long cookie, size_t size,
+ unsigned long flags);
+extern void __iop3xx_iounmap(void __iomem *addr);
-#define __io(p) ((void __iomem *)(p))
+#define IO_SPACE_LIMIT 0xffffffff
+#define __io(p) ((void __iomem *)IOP3XX_PCI_IO_PHYS_TO_VIRT(p))
#define __mem_pci(a) (a)
+#define __arch_ioremap(a, s, f) __iop3xx_ioremap(a, s, f)
+#define __arch_iounmap(a) __iop3xx_iounmap(a)
#endif
diff --git a/include/asm-arm/arch-iop33x/io.h b/include/asm-arm/arch-iop33x/io.h
index c017402..1bb5071 100644
--- a/include/asm-arm/arch-iop33x/io.h
+++ b/include/asm-arm/arch-iop33x/io.h
@@ -13,9 +13,16 @@
#include <asm/hardware.h>
+extern void __iomem * __ioremap(unsigned long, size_t, unsigned long);
+extern void __iomem *__iop3xx_ioremap(unsigned long cookie, size_t size,
+ unsigned long flags);
+extern void __iop3xx_iounmap(void __iomem *addr);
+
#define IO_SPACE_LIMIT 0xffffffff
-#define __io(p) ((void __iomem *)(p))
+#define __io(p) ((void __iomem *)IOP3XX_PCI_IO_PHYS_TO_VIRT(p))
#define __mem_pci(a) (a)
+#define __arch_ioremap(a, s, f) __iop3xx_ioremap(a, s, f)
+#define __arch_iounmap(a) __iop3xx_iounmap(a)
#endif
diff --git a/include/asm-arm/arch-ixp4xx/avila.h b/include/asm-arm/arch-ixp4xx/avila.h
new file mode 100644
index 0000000..0dfea0c
--- /dev/null
+++ b/include/asm-arm/arch-ixp4xx/avila.h
@@ -0,0 +1,39 @@
+/*
+ * include/asm-arm/arch-ixp4xx/avila.h
+ *
+ * Gateworks Avila platform specific definitions
+ *
+ * Author: Michael-Luke Jones <mlj28@cam.ac.uk>
+ *
+ * Based on ixdp425.h
+ * Author: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright 2004 (c) MontaVista, Software, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H__
+#error "Do not include this directly, instead #include <asm/hardware.h>"
+#endif
+
+#define AVILA_SDA_PIN 7
+#define AVILA_SCL_PIN 6
+
+/*
+ * AVILA PCI IRQs
+ */
+#define AVILA_PCI_MAX_DEV 4
+#define LOFT_PCI_MAX_DEV 6
+#define AVILA_PCI_IRQ_LINES 4
+
+
+/* PCI controller GPIO to IRQ pin mappings */
+#define AVILA_PCI_INTA_PIN 11
+#define AVILA_PCI_INTB_PIN 10
+#define AVILA_PCI_INTC_PIN 9
+#define AVILA_PCI_INTD_PIN 8
+
+
diff --git a/include/asm-arm/arch-ixp4xx/hardware.h b/include/asm-arm/arch-ixp4xx/hardware.h
index 6acb69c..88fd087 100644
--- a/include/asm-arm/arch-ixp4xx/hardware.h
+++ b/include/asm-arm/arch-ixp4xx/hardware.h
@@ -42,6 +42,7 @@
/* Platform specific details */
#include "ixdp425.h"
+#include "avila.h"
#include "coyote.h"
#include "prpmc1100.h"
#include "nslu2.h"
diff --git a/include/asm-arm/arch-ixp4xx/irqs.h b/include/asm-arm/arch-ixp4xx/irqs.h
index f24b763..e44a563 100644
--- a/include/asm-arm/arch-ixp4xx/irqs.h
+++ b/include/asm-arm/arch-ixp4xx/irqs.h
@@ -79,6 +79,15 @@
#define IRQ_IXDP425_PCI_INTD IRQ_IXP4XX_GPIO8
/*
+ * Gateworks Avila board IRQs
+ */
+#define IRQ_AVILA_PCI_INTA IRQ_IXP4XX_GPIO11
+#define IRQ_AVILA_PCI_INTB IRQ_IXP4XX_GPIO10
+#define IRQ_AVILA_PCI_INTC IRQ_IXP4XX_GPIO9
+#define IRQ_AVILA_PCI_INTD IRQ_IXP4XX_GPIO8
+
+
+/*
* PrPMC1100 Board IRQs
*/
#define IRQ_PRPMC1100_PCI_INTA IRQ_IXP4XX_GPIO11
diff --git a/include/asm-arm/arch-ixp4xx/udc.h b/include/asm-arm/arch-ixp4xx/udc.h
index dbdec36..79b850a 100644
--- a/include/asm-arm/arch-ixp4xx/udc.h
+++ b/include/asm-arm/arch-ixp4xx/udc.h
@@ -6,3 +6,25 @@
extern void ixp4xx_set_udc_info(struct pxa2xx_udc_mach_info *info);
+static inline int udc_gpio_to_irq(unsigned gpio)
+{
+ return 0;
+}
+
+static inline void udc_gpio_init_vbus(unsigned gpio)
+{
+}
+
+static inline void udc_gpio_init_pullup(unsigned gpio)
+{
+}
+
+static inline int udc_gpio_get(unsigned gpio)
+{
+ return 0;
+}
+
+static inline void udc_gpio_set(unsigned gpio, int is_on)
+{
+}
+
diff --git a/include/asm-arm/arch-ns9xxx/board.h b/include/asm-arm/arch-ns9xxx/board.h
new file mode 100644
index 0000000..91dc8fb
--- /dev/null
+++ b/include/asm-arm/arch-ns9xxx/board.h
@@ -0,0 +1,18 @@
+/*
+ * include/asm-arm/arch-ns9xxx/board.h
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_BOARD_H
+#define __ASM_ARCH_BOARD_H
+
+#include <asm/mach-types.h>
+
+#define board_is_a9m9750dev() (machine_is_cc9p9360dev())
+
+#endif /* ifndef __ASM_ARCH_BOARD_H */
diff --git a/include/asm-arm/arch-ns9xxx/clock.h b/include/asm-arm/arch-ns9xxx/clock.h
new file mode 100644
index 0000000..4371a48
--- /dev/null
+++ b/include/asm-arm/arch-ns9xxx/clock.h
@@ -0,0 +1,37 @@
+/*
+ * include/asm-arm/arch-ns9xxx/clock.h
+ *
+ * Copyright (C) 2007 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_CLOCK_H
+#define __ASM_ARCH_CLOCK_H
+
+static inline u32 ns9xxx_systemclock(void)
+{
+ /*
+ * This should be a multiple of HZ * TIMERCLOCKSELECT (in time.c)
+ */
+ return 353894400;
+}
+
+static inline const u32 ns9xxx_cpuclock(void)
+{
+ return ns9xxx_systemclock() / 2;
+}
+
+static inline const u32 ns9xxx_ahbclock(void)
+{
+ return ns9xxx_systemclock() / 4;
+}
+
+static inline const u32 ns9xxx_bbusclock(void)
+{
+ return ns9xxx_systemclock() / 8;
+}
+
+#endif /* ifndef __ASM_ARCH_CLOCK_H */
diff --git a/include/asm-arm/arch-ns9xxx/debug-macro.S b/include/asm-arm/arch-ns9xxx/debug-macro.S
new file mode 100644
index 0000000..b21b93e
--- /dev/null
+++ b/include/asm-arm/arch-ns9xxx/debug-macro.S
@@ -0,0 +1,22 @@
+/*
+ * include/asm-arm/arch-ns9xxx/debug-macro.S
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#include <asm/hardware.h>
+
+#include <asm/arch-ns9xxx/regs-board-a9m9750dev.h>
+
+ .macro addruart,rx
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1
+ ldreq \rx, =NS9XXX_CSxSTAT_PHYS(0)
+ ldrne \rx, =io_p2v(NS9XXX_CSxSTAT_PHYS(0))
+ .endm
+
+#define UART_SHIFT 2
+#include <asm/hardware/debug-8250.S>
diff --git a/include/asm-arm/arch-ns9xxx/dma.h b/include/asm-arm/arch-ns9xxx/dma.h
new file mode 100644
index 0000000..a67cbbe
--- /dev/null
+++ b/include/asm-arm/arch-ns9xxx/dma.h
@@ -0,0 +1,14 @@
+/*
+ * include/asm-arm/arch-ns9xxx/dma.h
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+#endif /* ifndef __ASM_ARCH_DMA_H */
diff --git a/include/asm-arm/arch-ns9xxx/entry-macro.S b/include/asm-arm/arch-ns9xxx/entry-macro.S
new file mode 100644
index 0000000..467a198
--- /dev/null
+++ b/include/asm-arm/arch-ns9xxx/entry-macro.S
@@ -0,0 +1,22 @@
+/*
+ * include/asm-arm/arch-ns9xxx/entry-macro.S
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#include <asm/hardware.h>
+#include <asm/arch-ns9xxx/regs-sys.h>
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+ ldr \base, =SYS_ISRADDR
+ ldr \irqstat, [\base, #(SYS_ISA - SYS_ISRADDR)]
+ cmp \irqstat, #0
+ ldrne \irqnr, [\base]
+ .endm
+
+ .macro disable_fiq
+ .endm
diff --git a/include/asm-arm/arch-ns9xxx/hardware.h b/include/asm-arm/arch-ns9xxx/hardware.h
new file mode 100644
index 0000000..6819da7
--- /dev/null
+++ b/include/asm-arm/arch-ns9xxx/hardware.h
@@ -0,0 +1,67 @@
+/*
+ * include/asm-arm/arch-ns9xxx/hardware.h
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/memory.h>
+
+/*
+ * NetSilicon NS9xxx internal mapping:
+ *
+ * physical <--> virtual
+ * 0x90000000 - 0x906fffff <--> 0xf9000000 - 0xf96fffff
+ * 0xa0100000 - 0xa0afffff <--> 0xfa100000 - 0xfaafffff
+ */
+#define io_p2v(x) (0xf0000000 \
+ + (((x) & 0xf0000000) >> 4) \
+ + ((x) & 0x00ffffff))
+
+#define io_v2p(x) ((((x) & 0x0f000000) << 4) \
+ + ((x) & 0x00ffffff))
+
+#define __REGBIT(bit) ((u32)1 << (bit))
+#define __REGBITS(hbit, lbit) ((((u32)1 << ((hbit) - (lbit) + 1)) - 1) << (lbit))
+#define __REGVAL(mask, value) (((value) * ((mask) & (-(mask))) & (mask)))
+
+#ifndef __ASSEMBLY__
+
+# define __REG(x) (*((volatile u32 *)io_p2v((x))))
+# define __REG2(x, y) (*((volatile u32 *)io_p2v((x)) + (y)))
+
+# define __REGB(x) (*((volatile u8 *)io_p2v((x))))
+# define __REGB2(x) (*((volatile u8 *)io_p2v((x)) + (y)))
+
+# define REGSET(var, reg, field, value) \
+ ((var) = (((var) \
+ & ~(reg ## _ ## field & \
+ ~ reg ## _ ## field ## _ ## value)) \
+ | (reg ## _ ## field ## _ ## value)))
+
+# define REGSETIM(var, reg, field, value) \
+ ((var) = (((var) \
+ & ~(reg ## _ ## field & \
+ ~(__REGVAL(reg ## _ ## field, value)))) \
+ | (__REGVAL(reg ## _ ## field, value))))
+
+# define REGGET(reg, field) \
+ ((reg & (reg ## _ ## field)) / (field & (-field)))
+
+#else
+
+# define __REG(x) io_p2v(x)
+# define __REG2(x, y) io_p2v((x) + (y))
+
+# define __REGB(x) __REG((x))
+# define __REGB2(x, y) __REG2((x), (y))
+
+#endif
+
+#endif /* ifndef __ASM_ARCH_HARDWARE_H */
diff --git a/include/asm-arm/arch-ns9xxx/io.h b/include/asm-arm/arch-ns9xxx/io.h
new file mode 100644
index 0000000..6f82d28
--- /dev/null
+++ b/include/asm-arm/arch-ns9xxx/io.h
@@ -0,0 +1,20 @@
+/*
+ * include/asm-arm/arch-ns9xxx/io.h
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff /* XXX */
+
+#define __io(a) ((void __iomem *)(a))
+#define __mem_pci(a) (a)
+#define __mem_isa(a) (IO_BASE + (a))
+
+#endif /* ifndef __ASM_ARCH_IO_H */
diff --git a/include/asm-arm/arch-ns9xxx/irqs.h b/include/asm-arm/arch-ns9xxx/irqs.h
new file mode 100644
index 0000000..25d8d28
--- /dev/null
+++ b/include/asm-arm/arch-ns9xxx/irqs.h
@@ -0,0 +1,85 @@
+/*
+ * include/asm-arm/arch-ns9xxx/irqs.h
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+#define IRQ_WATCHDOG 0
+#define IRQ_AHBBUSERR 1
+#define IRQ_BBUSAGG 2
+/* irq 3 is reserved for NS9360 */
+#define IRQ_ETHRX 4
+#define IRQ_ETHTX 5
+#define IRQ_ETHPHY 6
+#define IRQ_LCD 7
+#define IRQ_SERBRX 8
+#define IRQ_SERBTX 9
+#define IRQ_SERARX 10
+#define IRQ_SERATX 11
+#define IRQ_SERCRX 12
+#define IRQ_SERCTX 13
+#define IRQ_I2C 14
+#define IRQ_BBUSDMA 15
+#define IRQ_TIMER0 16
+#define IRQ_TIMER1 17
+#define IRQ_TIMER2 18
+#define IRQ_TIMER3 19
+#define IRQ_TIMER4 20
+#define IRQ_TIMER5 21
+#define IRQ_TIMER6 22
+#define IRQ_TIMER7 23
+#define IRQ_RTC 24
+#define IRQ_USBHOST 25
+#define IRQ_USBDEVICE 26
+#define IRQ_IEEE1284 27
+#define IRQ_EXT0 28
+#define IRQ_EXT1 29
+#define IRQ_EXT2 30
+#define IRQ_EXT3 31
+
+#define BBUS_IRQ(irq) (32 + irq)
+
+#define IRQ_BBUS_DMA BBUS_IRQ(0)
+#define IRQ_BBUS_SERBRX BBUS_IRQ(2)
+#define IRQ_BBUS_SERBTX BBUS_IRQ(3)
+#define IRQ_BBUS_SERARX BBUS_IRQ(4)
+#define IRQ_BBUS_SERATX BBUS_IRQ(5)
+#define IRQ_BBUS_SERCRX BBUS_IRQ(6)
+#define IRQ_BBUS_SERCTX BBUS_IRQ(7)
+#define IRQ_BBUS_SERDRX BBUS_IRQ(8)
+#define IRQ_BBUS_SERDTX BBUS_IRQ(9)
+#define IRQ_BBUS_I2C BBUS_IRQ(10)
+#define IRQ_BBUS_1284 BBUS_IRQ(11)
+#define IRQ_BBUS_UTIL BBUS_IRQ(12)
+#define IRQ_BBUS_RTC BBUS_IRQ(13)
+#define IRQ_BBUS_USBHST BBUS_IRQ(14)
+#define IRQ_BBUS_USBDEV BBUS_IRQ(15)
+#define IRQ_BBUS_AHBDMA1 BBUS_IRQ(24)
+#define IRQ_BBUS_AHBDMA2 BBUS_IRQ(25)
+
+/*
+ * these Interrupts are specific for the a9m9750dev board.
+ * They are generated by an FPGA that interrupts the CPU on
+ * IRQ_EXT2
+ */
+#define FPGA_IRQ(irq) (64 + irq)
+
+#define IRQ_FPGA_UARTA FPGA_IRQ(0)
+#define IRQ_FPGA_UARTB FPGA_IRQ(1)
+#define IRQ_FPGA_UARTC FPGA_IRQ(2)
+#define IRQ_FPGA_UARTD FPGA_IRQ(3)
+#define IRQ_FPGA_TOUCH FPGA_IRQ(4)
+#define IRQ_FPGA_CF FPGA_IRQ(5)
+#define IRQ_FPGA_CAN0 FPGA_IRQ(6)
+#define IRQ_FPGA_CAN1 FPGA_IRQ(7)
+
+#define NR_IRQS 72
+
+#endif /* __ASM_ARCH_IRQS_H */
diff --git a/include/asm-arm/arch-ns9xxx/memory.h b/include/asm-arm/arch-ns9xxx/memory.h
new file mode 100644
index 0000000..ce1343e
--- /dev/null
+++ b/include/asm-arm/arch-ns9xxx/memory.h
@@ -0,0 +1,27 @@
+/*
+ * include/asm-arm/arch-ns9xxx/memory.h
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+*/
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/* x in [0..3] */
+#define NS9XXX_CSxSTAT_PHYS(x) UL(((x) + 4) << 28)
+
+#define NS9XXX_CS0STAT_LENGTH UL(0x1000)
+#define NS9XXX_CS1STAT_LENGTH UL(0x1000)
+#define NS9XXX_CS2STAT_LENGTH UL(0x1000)
+#define NS9XXX_CS3STAT_LENGTH UL(0x1000)
+
+#define PHYS_OFFSET UL(0x00000000)
+
+#define __virt_to_bus(x) __virt_to_phys(x)
+#define __bus_to_virt(x) __phys_to_virt(x)
+
+#endif
diff --git a/include/asm-arm/arch-ns9xxx/processor.h b/include/asm-arm/arch-ns9xxx/processor.h
new file mode 100644
index 0000000..716c106
--- /dev/null
+++ b/include/asm-arm/arch-ns9xxx/processor.h
@@ -0,0 +1,18 @@
+/*
+ * include/asm-arm/arch-ns9xxx/processor.h
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_PROCESSOR_H
+#define __ASM_ARCH_PROCESSOR_H
+
+#include <asm/mach-types.h>
+
+#define processor_is_ns9360() (machine_is_cc9p9360dev())
+
+#endif /* ifndef __ASM_ARCH_PROCESSOR_H */
diff --git a/include/asm-arm/arch-ns9xxx/regs-bbu.h b/include/asm-arm/arch-ns9xxx/regs-bbu.h
new file mode 100644
index 0000000..e262695
--- /dev/null
+++ b/include/asm-arm/arch-ns9xxx/regs-bbu.h
@@ -0,0 +1,21 @@
+/*
+ * include/asm-arm/arch-ns9xxx/regs-bbu.h
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_REGSBBU_H
+#define __ASM_ARCH_REGSBBU_H
+
+#include <asm/hardware.h>
+
+/* BBus Utility */
+
+/* GPIO Configuration Register */
+#define BBU_GC(x) __REG2(0x9060000c, (x))
+
+#endif /* ifndef __ASM_ARCH_REGSBBU_H */
diff --git a/include/asm-arm/arch-ns9xxx/regs-board-a9m9750dev.h b/include/asm-arm/arch-ns9xxx/regs-board-a9m9750dev.h
new file mode 100644
index 0000000..c3dc532
--- /dev/null
+++ b/include/asm-arm/arch-ns9xxx/regs-board-a9m9750dev.h
@@ -0,0 +1,24 @@
+/*
+ * include/asm-arm/arch-ns9xxx/regs-board-a9m9750dev.h
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_REGSBOARDA9M9750_H
+#define __ASM_ARCH_REGSBOARDA9M9750_H
+
+#include <asm/hardware.h>
+
+#define FPGA_UARTA_BASE io_p2v(NS9XXX_CSxSTAT_PHYS(0))
+#define FPGA_UARTB_BASE io_p2v(NS9XXX_CSxSTAT_PHYS(0) + 0x08)
+#define FPGA_UARTC_BASE io_p2v(NS9XXX_CSxSTAT_PHYS(0) + 0x10)
+#define FPGA_UARTD_BASE io_p2v(NS9XXX_CSxSTAT_PHYS(0) + 0x18)
+
+#define FPGA_IER __REGB(NS9XXX_CSxSTAT_PHYS(0) + 0x50)
+#define FPGA_ISR __REGB(NS9XXX_CSxSTAT_PHYS(0) + 0x60)
+
+#endif /* ifndef __ASM_ARCH_REGSBOARDA9M9750_H */
diff --git a/include/asm-arm/arch-ns9xxx/regs-mem.h b/include/asm-arm/arch-ns9xxx/regs-mem.h
new file mode 100644
index 0000000..8ed8448
--- /dev/null
+++ b/include/asm-arm/arch-ns9xxx/regs-mem.h
@@ -0,0 +1,135 @@
+/*
+ * include/asm-arm/arch-ns9xxx/regs-mem.h
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_REGSMEM_H
+#define __ASM_ARCH_REGSMEM_H
+
+#include <asm/hardware.h>
+
+/* Memory Module */
+
+/* Control register */
+#define MEM_CTRL __REG(0xa0700000)
+
+/* Status register */
+#define MEM_STAT __REG(0xa0700004)
+
+/* Configuration register */
+#define MEM_CONF __REG(0xa0700008)
+
+/* Dynamic Memory Control register */
+#define MEM_DMCTRL __REG(0xa0700020)
+
+/* Dynamic Memory Refresh Timer */
+#define MEM_DMRT __REG(0xa0700024)
+
+/* Dynamic Memory Read Configuration register */
+#define MEM_DMRC __REG(0xa0700028)
+
+/* Dynamic Memory Precharge Command Period (tRP) */
+#define MEM_DMPCP __REG(0xa0700030)
+
+/* Dynamic Memory Active to Precharge Command Period (tRAS) */
+#define MEM_DMAPCP __REG(0xa0700034)
+
+/* Dynamic Memory Self-Refresh Exit Time (tSREX) */
+#define MEM_DMSRET __REG(0xa0700038)
+
+/* Dynamic Memory Last Data Out to Active Time (tAPR) */
+#define MEM_DMLDOAT __REG(0xa070003c)
+
+/* Dynamic Memory Data-in to Active Command Time (tDAL or TAPW) */
+#define MEM_DMDIACT __REG(0xa0700040)
+
+/* Dynamic Memory Write Recovery Time (tWR, tDPL, tRWL, tRDL) */
+#define MEM_DMWRT __REG(0xa0700044)
+
+/* Dynamic Memory Active to Active Command Period (tRC) */
+#define MEM_DMAACP __REG(0xa0700048)
+
+/* Dynamic Memory Auto Refresh Period, and Auto Refresh to Active Command Period (tRFC) */
+#define MEM_DMARP __REG(0xa070004c)
+
+/* Dynamic Memory Exit Self-Refresh to Active Command (tXSR) */
+#define MEM_DMESRAC __REG(0xa0700050)
+
+/* Dynamic Memory Active Bank A to Active B Time (tRRD) */
+#define MEM_DMABAABT __REG(0xa0700054)
+
+/* Dynamic Memory Load Mode register to Active Command Time (tMRD) */
+#define MEM_DMLMACT __REG(0xa0700058)
+
+/* Static Memory Extended Wait */
+#define MEM_SMEW __REG(0xa0700080)
+
+/* Dynamic Memory Configuration Register x */
+#define MEM_DMCONF(x) __REG2(0xa0700100, (x) << 3)
+
+/* Dynamic Memory RAS and CAS Delay x */
+#define MEM_DMRCD(x) __REG2(0xa0700104, (x) << 3)
+
+/* Static Memory Configuration Register x */
+#define MEM_SMC(x) __REG2(0xa0700200, (x) << 3)
+
+/* Static Memory Configuration Register x: Write protect */
+#define MEM_SMC_WSMC __REGBIT(20)
+#define MEM_SMC_WSMC_OFF __REGVAL(MEM_SMC_WSMC, 0)
+#define MEM_SMC_WSMC_ON __REGVAL(MEM_SMC_WSMC, 1)
+
+/* Static Memory Configuration Register x: Buffer enable */
+#define MEM_SMC_BSMC __REGBIT(19)
+#define MEM_SMC_BSMC_OFF __REGVAL(MEM_SMC_BSMC, 0)
+#define MEM_SMC_BSMC_ON __REGVAL(MEM_SMC_BSMC, 1)
+
+/* Static Memory Configuration Register x: Extended Wait */
+#define MEM_SMC_EW __REGBIT(8)
+#define MEM_SMC_EW_OFF __REGVAL(MEM_SMC_EW, 0)
+#define MEM_SMC_EW_ON __REGVAL(MEM_SMC_EW, 1)
+
+/* Static Memory Configuration Register x: Byte lane state */
+#define MEM_SMC_PB __REGBIT(7)
+#define MEM_SMC_PB_0 __REGVAL(MEM_SMC_PB, 0)
+#define MEM_SMC_PB_1 __REGVAL(MEM_SMC_PB, 1)
+
+/* Static Memory Configuration Register x: Chip select polarity */
+#define MEM_SMC_PC __REGBIT(6)
+#define MEM_SMC_PC_AL __REGVAL(MEM_SMC_PC, 0)
+#define MEM_SMC_PC_AH __REGVAL(MEM_SMC_PC, 1)
+
+/* static memory configuration register x: page mode*/
+#define MEM_SMC_PM __REGBIT(3)
+#define MEM_SMC_PM_DIS __REGVAL(MEM_SMC_PM, 0)
+#define MEM_SMC_PM_ASYNC __REGVAL(MEM_SMC_PM, 1)
+
+/* static memory configuration register x: Memory width */
+#define MEM_SMC_MW __REGBITS(1, 0)
+#define MEM_SMC_MW_8 __REGVAL(MEM_SMC_MW, 0)
+#define MEM_SMC_MW_16 __REGVAL(MEM_SMC_MW, 1)
+#define MEM_SMC_MW_32 __REGVAL(MEM_SMC_MW, 2)
+
+/* Static Memory Write Enable Delay x */
+#define MEM_SMWED(x) __REG2(0xa0700204, (x) << 3)
+
+/* Static Memory Output Enable Delay x */
+#define MEM_SMOED(x) __REG2(0xa0700208, (x) << 3)
+
+/* Static Memory Read Delay x */
+#define MEM_SMRD(x) __REG2(0xa070020c, (x) << 3)
+
+/* Static Memory Page Mode Read Delay 0 */
+#define MEM_SMPMRD(x) __REG2(0xa0700210, (x) << 3)
+
+/* Static Memory Write Delay */
+#define MEM_SMWD(x) __REG2(0xa0700214, (x) << 3)
+
+/* Static Memory Turn Round Delay x */
+#define MEM_SWT(x) __REG2(0xa0700218, (x) << 3)
+
+#endif /* ifndef __ASM_ARCH_REGSMEM_H */
diff --git a/include/asm-arm/arch-ns9xxx/regs-sys.h b/include/asm-arm/arch-ns9xxx/regs-sys.h
new file mode 100644
index 0000000..8162a50
--- /dev/null
+++ b/include/asm-arm/arch-ns9xxx/regs-sys.h
@@ -0,0 +1,157 @@
+/*
+ * include/asm-arm/arch-ns9xxx/regs-sys.h
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_REGSSYS_H
+#define __ASM_ARCH_REGSSYS_H
+
+#include <asm/hardware.h>
+
+/* System Control Module */
+
+/* AHB Arbiter Gen Configuration */
+#define SYS_AHBAGENCONF __REG(0xa0900000)
+
+/* BRC */
+#define SYS_BRC(x) __REG2(0xa0900004, (x))
+
+/* Timer x Reload Count register */
+#define SYS_TRC(x) __REG2(0xa0900044, (x))
+
+/* Timer x Read register */
+#define SYS_TR(x) __REG2(0xa0900084, (x))
+
+/* Interrupt Vector Address Register Level x */
+#define SYS_IVA(x) __REG2(0xa09000c4, (x))
+
+/* Interrupt Configuration registers */
+#define SYS_IC(x) __REG2(0xa0900144, (x))
+
+/* ISRADDR */
+#define SYS_ISRADDR __REG(0xa0900164)
+
+/* Interrupt Status Active */
+#define SYS_ISA __REG(0xa0900168)
+
+/* Interrupt Status Raw */
+#define SYS_ISR __REG(0xa090016c)
+
+/* Timer Interrupt Status register */
+#define SYS_TIS __REG(0xa0900170)
+
+/* PLL Configuration register */
+#define SYS_PLL __REG(0xa0900188)
+
+/* PLL Configuration register: PLL SW change */
+#define SYS_PLL_SWC __REGBIT(15)
+#define SYS_PLL_SWC_NO __REGVAL(SYS_PLL_SWC, 0)
+#define SYS_PLL_SWC_YES __REGVAL(SYS_PLL_SWC, 1)
+
+/* Timer x Control register */
+#define SYS_TC(x) __REG2(0xa0900190, (x))
+
+/* Timer x Control register: Timer enable */
+#define SYS_TCx_TEN __REGBIT(15)
+#define SYS_TCx_TEN_DIS __REGVAL(SYS_TCx_TEN, 1)
+#define SYS_TCx_TEN_EN __REGVAL(SYS_TCx_TEN, 1)
+
+/* Timer x Control register: CPU debug mode */
+#define SYS_TCx_TDBG __REGBIT(10)
+#define SYS_TCx_TDBG_CONT __REGVAL(SYS_TCx_TDBG, 0)
+#define SYS_TCx_TDBG_STOP __REGVAL(SYS_TCx_TDBG, 1)
+
+/* Timer x Control register: Interrupt clear */
+#define SYS_TCx_INTC __REGBIT(9)
+#define SYS_TCx_INTC_UNSET __REGVAL(SYS_TCx_INTC, 0)
+#define SYS_TCx_INTC_SET __REGVAL(SYS_TCx_INTC, 1)
+
+/* Timer x Control register: Timer clock select */
+#define SYS_TCx_TLCS __REGBITS(8, 6)
+#define SYS_TCx_TLCS_CPU __REGVAL(SYS_TCx_TLCS, 0) /* CPU clock */
+#define SYS_TCx_TLCS_DIV2 __REGVAL(SYS_TCx_TLCS, 1) /* CPU clock / 2 */
+#define SYS_TCx_TLCS_DIV4 __REGVAL(SYS_TCx_TLCS, 2) /* CPU clock / 4 */
+#define SYS_TCx_TLCS_DIV8 __REGVAL(SYS_TCx_TLCS, 3) /* CPU clock / 8 */
+#define SYS_TCx_TLCS_DIV16 __REGVAL(SYS_TCx_TLCS, 4) /* CPU clock / 16 */
+#define SYS_TCx_TLCS_DIV32 __REGVAL(SYS_TCx_TLCS, 5) /* CPU clock / 32 */
+#define SYS_TCx_TLCS_DIV64 __REGVAL(SYS_TCx_TLCS, 6) /* CPU clock / 64 */
+#define SYS_TCx_TLCS_EXT __REGVAL(SYS_TCx_TLCS, 7)
+
+/* Timer x Control register: Timer mode */
+#define SYS_TCx_TM __REGBITS(5, 4)
+#define SYS_TCx_TM_IEE __REGVAL(SYS_TCx_TM, 0) /* Internal timer or external event */
+#define SYS_TCx_TM_ELL __REGVAL(SYS_TCx_TM, 1) /* External low-level, gated timer */
+#define SYS_TCx_TM_EHL __REGVAL(SYS_TCx_TM, 2) /* External high-level, gated timer */
+#define SYS_TCx_TM_CONCAT __REGVAL(SYS_TCx_TM, 3) /* Concatenate the lower timer. */
+
+/* Timer x Control register: Interrupt select */
+#define SYS_TCx_INTS __REGBIT(3)
+#define SYS_TCx_INTS_DIS __REGVAL(SYS_TCx_INTS, 0)
+#define SYS_TCx_INTS_EN __REGVAL(SYS_TCx_INTS, 1)
+
+/* Timer x Control register: Up/down select */
+#define SYS_TCx_UDS __REGBIT(2)
+#define SYS_TCx_UDS_UP __REGVAL(SYS_TCx_UDS, 0)
+#define SYS_TCx_UDS_DOWN __REGVAL(SYS_TCx_UDS, 1)
+
+/* Timer x Control register: 32- or 16-bit timer */
+#define SYS_TCx_TSZ __REGBIT(1)
+#define SYS_TCx_TSZ_16 __REGVAL(SYS_TCx_TSZ, 0)
+#define SYS_TCx_TSZ_32 __REGVAL(SYS_TCx_TSZ, 1)
+
+/* Timer x Control register: Reload enable */
+#define SYS_TCx_REN __REGBIT(0)
+#define SYS_TCx_REN_DIS __REGVAL(SYS_TCx_REN, 0)
+#define SYS_TCx_REN_EN __REGVAL(SYS_TCx_REN, 1)
+
+/* System Memory Chip Select x Dynamic Memory Base */
+#define SYS_SMCSDMB(x) __REG2(0xa09001d0, (x) << 1)
+
+/* System Memory Chip Select x Dynamic Memory Mask */
+#define SYS_SMCSDMM(x) __REG2(0xa09001d4, (x) << 1)
+
+/* System Memory Chip Select x Static Memory Base */
+#define SYS_SMCSSMB(x) __REG2(0xa09001f0, (x) << 1)
+
+/* System Memory Chip Select x Static Memory Base: Chip select x base */
+#define SYS_SMCSSMB_CSxB __REGBITS(31, 12)
+
+/* System Memory Chip Select x Static Memory Mask */
+#define SYS_SMCSSMM(x) __REG2(0xa09001f4, (x) << 1)
+
+/* System Memory Chip Select x Static Memory Mask: Chip select x mask */
+#define SYS_SMCSSMM_CSxM __REGBITS(31, 12)
+
+/* System Memory Chip Select x Static Memory Mask: Chip select x enable */
+#define SYS_SMCSSMM_CSEx __REGBIT(0)
+#define SYS_SMCSSMM_CSEx_DIS __REGVAL(SYS_SMCSSMM_CSEx, 0)
+#define SYS_SMCSSMM_CSEx_EN __REGVAL(SYS_SMCSSMM_CSEx, 1)
+
+/* General purpose, user-defined ID register */
+#define SYS_GENID __REG(0xa0900210)
+
+/* External Interrupt x Control register */
+#define SYS_EIC(x) __REG2(0xa0900214, (x))
+
+/* External Interrupt x Control register: Status */
+#define SYS_EIC_STS __REGBIT(3)
+
+/* External Interrupt x Control register: Clear */
+#define SYS_EIC_CLR __REGBIT(2)
+
+/* External Interrupt x Control register: Polarity */
+#define SYS_EIC_PLTY __REGBIT(1)
+#define SYS_EIC_PLTY_AH __REGVAL(SYS_EIC_PLTY, 0)
+#define SYS_EIC_PLTY_AL __REGVAL(SYS_EIC_PLTY, 1)
+
+/* External Interrupt x Control register: Level edge */
+#define SYS_EIC_LVEDG __REGBIT(0)
+#define SYS_EIC_LVEDG_LEVEL __REGVAL(SYS_EIC_LVEDG, 0)
+#define SYS_EIC_LVEDG_EDGE __REGVAL(SYS_EIC_LVEDG, 1)
+
+#endif /* ifndef __ASM_ARCH_REGSSYS_H */
diff --git a/include/asm-arm/arch-ns9xxx/system.h b/include/asm-arm/arch-ns9xxx/system.h
new file mode 100644
index 0000000..e3cd4d3
--- /dev/null
+++ b/include/asm-arm/arch-ns9xxx/system.h
@@ -0,0 +1,34 @@
+/*
+ * include/asm-arm/arch-ns9xxx/system.h
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <asm/proc-fns.h>
+#include <asm/arch-ns9xxx/regs-sys.h>
+#include <asm/mach-types.h>
+
+static inline void arch_idle(void)
+{
+ cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+ u32 reg;
+
+ reg = SYS_PLL >> 16;
+ REGSET(reg, SYS_PLL, SWC, YES);
+ SYS_PLL = reg;
+
+ BUG();
+}
+
+#endif /* ifndef __ASM_ARCH_SYSTEM_H */
diff --git a/include/asm-arm/arch-ns9xxx/timex.h b/include/asm-arm/arch-ns9xxx/timex.h
new file mode 100644
index 0000000..f776cbd
--- /dev/null
+++ b/include/asm-arm/arch-ns9xxx/timex.h
@@ -0,0 +1,20 @@
+/*
+ * include/asm-arm/arch-ns9xxx/timex.h
+ *
+ * Copyright (C) 2005-2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+/*
+ * value for CLOCK_TICK_RATE stolen from include/asm-arm/arch-s3c2410/timex.h.
+ * See there for an explanation.
+ */
+#define CLOCK_TICK_RATE 12000000
+
+#endif /* ifndef __ASM_ARCH_TIMEX_H */
diff --git a/include/asm-arm/arch-ns9xxx/uncompress.h b/include/asm-arm/arch-ns9xxx/uncompress.h
new file mode 100644
index 0000000..961ca7d
--- /dev/null
+++ b/include/asm-arm/arch-ns9xxx/uncompress.h
@@ -0,0 +1,35 @@
+/*
+ * include/asm-arm/arch-ns9xxx/uncompress.h
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+static void putc(char c)
+{
+ volatile u8 *base = (volatile u8 *)0x40000000;
+ int t = 0x10000;
+
+ do {
+ if (base[5] & 0x20) {
+ base[0] = c;
+ break;
+ }
+ } while (--t);
+}
+
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
+
+static void flush(void)
+{
+ /* nothing */
+}
+
+#endif /* ifndef __ASM_ARCH_UNCOMPRESS_H */
diff --git a/include/asm-arm/arch-ns9xxx/vmalloc.h b/include/asm-arm/arch-ns9xxx/vmalloc.h
new file mode 100644
index 0000000..2f3cb6f
--- /dev/null
+++ b/include/asm-arm/arch-ns9xxx/vmalloc.h
@@ -0,0 +1,16 @@
+/*
+ * include/asm-arm/arch-ns9xxx/vmalloc.h
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_VMALLOC_H
+#define __ASM_ARCH_VMALLOC_H
+
+#define VMALLOC_END (0xf0000000)
+
+#endif /* ifndef __ASM_ARCH_VMALLOC_H */
diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h
index e24f6b6..aec835b 100644
--- a/include/asm-arm/arch-pxa/pxa-regs.h
+++ b/include/asm-arm/arch-pxa/pxa-regs.h
@@ -463,9 +463,6 @@
* Serial Audio Controller
*/
-/* FIXME: This clash with SA1111 defines */
-#ifndef _ASM_ARCH_SA1111
-
#define SACR0 __REG(0x40400000) /* Global Control Register */
#define SACR1 __REG(0x40400004) /* Serial Audio I 2 S/MSB-Justified Control Register */
#define SASR0 __REG(0x4040000C) /* Serial Audio I 2 S/MSB-Justified Interface and FIFO Status Register */
@@ -474,8 +471,8 @@
#define SADIV __REG(0x40400060) /* Audio Clock Divider Register. */
#define SADR __REG(0x40400080) /* Serial Audio Data Register (TX and RX FIFO access Register). */
-#define SACR0_RFTH(x) (x << 12) /* Rx FIFO Interrupt or DMA Trigger Threshold */
-#define SACR0_TFTH(x) (x << 8) /* Tx FIFO Interrupt or DMA Trigger Threshold */
+#define SACR0_RFTH(x) ((x) << 12) /* Rx FIFO Interrupt or DMA Trigger Threshold */
+#define SACR0_TFTH(x) ((x) << 8) /* Tx FIFO Interrupt or DMA Trigger Threshold */
#define SACR0_STRF (1 << 5) /* FIFO Select for EFWR Special Function */
#define SACR0_EFWR (1 << 4) /* Enable EFWR Function */
#define SACR0_RST (1 << 3) /* FIFO, i2s Register Reset */
@@ -503,8 +500,6 @@
#define SAIMR_RFS (1 << 4) /* Enable Rx FIFO Service Interrupt */
#define SAIMR_TFS (1 << 3) /* Enable Tx FIFO Service Interrupt */
-#endif
-
/*
* AC97 Controller registers
*/
@@ -1682,15 +1677,18 @@
#define SSSR_PINT (1 << 18) /* Peripheral Trailing Byte Interrupt */
#define SSPSP_FSRT (1 << 25) /* Frame Sync Relative Timing */
-#define SSPSP_DMYSTOP(x) (x << 23) /* Dummy Stop */
-#define SSPSP_SFRMWDTH(x) (x << 16) /* Serial Frame Width */
-#define SSPSP_SFRMDLY(x) (x << 9) /* Serial Frame Delay */
-#define SSPSP_DMYSTRT(x) (x << 7) /* Dummy Start */
-#define SSPSP_STRTDLY(x) (x << 4) /* Start Delay */
+#define SSPSP_DMYSTOP(x) ((x) << 23) /* Dummy Stop */
+#define SSPSP_SFRMWDTH(x) ((x) << 16) /* Serial Frame Width */
+#define SSPSP_SFRMDLY(x) ((x) << 9) /* Serial Frame Delay */
+#define SSPSP_DMYSTRT(x) ((x) << 7) /* Dummy Start */
+#define SSPSP_STRTDLY(x) ((x) << 4) /* Start Delay */
#define SSPSP_ETDS (1 << 3) /* End of Transfer data State */
#define SSPSP_SFRMP (1 << 2) /* Serial Frame Polarity */
-#define SSPSP_SCMODE(x) (x << 0) /* Serial Bit Rate Clock Mode */
+#define SSPSP_SCMODE(x) ((x) << 0) /* Serial Bit Rate Clock Mode */
+#define SSACD_SCDB (1 << 3) /* SSPSYSCLK Divider Bypass */
+#define SSACD_ACPS(x) ((x) << 4) /* Audio clock PLL select */
+#define SSACD_ACDS(x) ((x) << 0) /* Audio clock divider select */
#define SSCR0_P1 __REG(0x41000000) /* SSP Port 1 Control Register 0 */
#define SSCR1_P1 __REG(0x41000004) /* SSP Port 1 Control Register 1 */
diff --git a/include/asm-arm/arch-pxa/udc.h b/include/asm-arm/arch-pxa/udc.h
index 646480d..8bc6f9c 100644
--- a/include/asm-arm/arch-pxa/udc.h
+++ b/include/asm-arm/arch-pxa/udc.h
@@ -9,3 +9,33 @@
extern void pxa_set_udc_info(struct pxa2xx_udc_mach_info *info);
+static inline int udc_gpio_to_irq(unsigned gpio)
+{
+ return IRQ_GPIO(gpio & GPIO_MD_MASK_NR);
+}
+
+static inline void udc_gpio_init_vbus(unsigned gpio)
+{
+ pxa_gpio_mode((gpio & GPIO_MD_MASK_NR) | GPIO_IN);
+}
+
+static inline void udc_gpio_init_pullup(unsigned gpio)
+{
+ pxa_gpio_mode((gpio & GPIO_MD_MASK_NR) | GPIO_OUT | GPIO_DFLT_LOW);
+}
+
+static inline int udc_gpio_get(unsigned gpio)
+{
+ return (GPLR(gpio) & GPIO_bit(gpio)) != 0;
+}
+
+static inline void udc_gpio_set(unsigned gpio, int is_on)
+{
+ int mask = GPIO_bit(gpio);
+
+ if (is_on)
+ GPSR(gpio) = mask;
+ else
+ GPCR(gpio) = mask;
+}
+
diff --git a/include/asm-arm/arch-realview/hardware.h b/include/asm-arm/arch-realview/hardware.h
index 9ca76dc..aa78fe0 100644
--- a/include/asm-arm/arch-realview/hardware.h
+++ b/include/asm-arm/arch-realview/hardware.h
@@ -26,7 +26,7 @@
#include <asm/arch/platform.h>
/* macro to get at IO space when running virtually */
-#define IO_ADDRESS(x) (((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + 0xf0000000)
+#define IO_ADDRESS(x) ((((x) & 0x0effffff) | (((x) >> 4) & 0x0f000000)) + 0xf0000000)
#define __io_address(n) __io(IO_ADDRESS(n))
#endif
diff --git a/include/asm-arm/arch-realview/irqs.h b/include/asm-arm/arch-realview/irqs.h
index c16223c..5a5db56 100644
--- a/include/asm-arm/arch-realview/irqs.h
+++ b/include/asm-arm/arch-realview/irqs.h
@@ -65,6 +65,21 @@
#define IRQ_AACI (IRQ_GIC_START + INT_AACI)
#define IRQ_ETH (IRQ_GIC_START + INT_ETH)
#define IRQ_USB (IRQ_GIC_START + INT_USB)
+#define IRQ_PMU_CPU0 (IRQ_GIC_START + INT_PMU_CPU0)
+#define IRQ_PMU_CPU1 (IRQ_GIC_START + INT_PMU_CPU1)
+#define IRQ_PMU_CPU2 (IRQ_GIC_START + INT_PMU_CPU2)
+#define IRQ_PMU_CPU3 (IRQ_GIC_START + INT_PMU_CPU3)
+#define IRQ_PMU_SCU0 (IRQ_GIC_START + INT_PMU_SCU0)
+#define IRQ_PMU_SCU1 (IRQ_GIC_START + INT_PMU_SCU1)
+#define IRQ_PMU_SCU2 (IRQ_GIC_START + INT_PMU_SCU2)
+#define IRQ_PMU_SCU3 (IRQ_GIC_START + INT_PMU_SCU3)
+#define IRQ_PMU_SCU4 (IRQ_GIC_START + INT_PMU_SCU4)
+#define IRQ_PMU_SCU5 (IRQ_GIC_START + INT_PMU_SCU5)
+#define IRQ_PMU_SCU6 (IRQ_GIC_START + INT_PMU_SCU6)
+#define IRQ_PMU_SCU7 (IRQ_GIC_START + INT_PMU_SCU7)
+
+#define IRQ_EB_IRQ1 (IRQ_GIC_START + INT_EB_IRQ1)
+#define IRQ_EB_IRQ2 (IRQ_GIC_START + INT_EB_IRQ2)
#define IRQMASK_WDOGINT INTMASK_WDOGINT
#define IRQMASK_SOFTINT INTMASK_SOFTINT
@@ -103,4 +118,4 @@
#define IRQMASK_ETH INTMASK_ETH
#define IRQMASK_USB INTMASK_USB
-#define NR_IRQS (IRQ_GIC_START + 64)
+#define NR_IRQS (IRQ_GIC_START + 96)
diff --git a/include/asm-arm/arch-realview/platform.h b/include/asm-arm/arch-realview/platform.h
index 18d7c18..6e0eab9 100644
--- a/include/asm-arm/arch-realview/platform.h
+++ b/include/asm-arm/arch-realview/platform.h
@@ -207,11 +207,25 @@
#define REALVIEW_GIC_CPU_BASE 0x10040000 /* Generic interrupt controller CPU interface */
#define REALVIEW_GIC_DIST_BASE 0x10041000 /* Generic interrupt controller distributor */
#else
+#ifdef CONFIG_REALVIEW_MPCORE_REVB
#define REALVIEW_MPCORE_SCU_BASE 0x10100000 /* SCU registers */
#define REALVIEW_GIC_CPU_BASE 0x10100100 /* Generic interrupt controller CPU interface */
#define REALVIEW_TWD_BASE 0x10100700
#define REALVIEW_TWD_SIZE 0x00000100
#define REALVIEW_GIC_DIST_BASE 0x10101000 /* Generic interrupt controller distributor */
+#define REALVIEW_MPCORE_L220_BASE 0x10102000 /* L220 registers */
+#define REALVIEW_MPCORE_SYS_PLD_CTRL1 0xD8 /* Register offset for MPCore sysctl */
+#else
+#define REALVIEW_MPCORE_SCU_BASE 0x1F000000 /* SCU registers */
+#define REALVIEW_GIC_CPU_BASE 0x1F000100 /* Generic interrupt controller CPU interface */
+#define REALVIEW_TWD_BASE 0x1F000700
+#define REALVIEW_TWD_SIZE 0x00000100
+#define REALVIEW_GIC_DIST_BASE 0x1F001000 /* Generic interrupt controller distributor */
+#define REALVIEW_MPCORE_L220_BASE 0x1F002000 /* L220 registers */
+#define REALVIEW_MPCORE_SYS_PLD_CTRL1 0x74 /* Register offset for MPCore sysctl */
+#endif
+#define REALVIEW_GIC1_CPU_BASE 0x10040000 /* Generic interrupt controller CPU interface */
+#define REALVIEW_GIC1_DIST_BASE 0x10041000 /* Generic interrupt controller distributor */
#endif
#define REALVIEW_SMC_BASE 0x10080000 /* SMC */
/* Reserved 0x10090000 - 0x100EFFFF */
@@ -306,7 +320,11 @@
#define INT_USB 29 /* USB controller */
#define INT_TSPENINT 30 /* Touchscreen pen */
#define INT_TSKPADINT 31 /* Touchscreen keypad */
+
#else
+
+#define MAX_GIC_NR 2
+
#define INT_AACI 0
#define INT_TIMERINT0_1 1
#define INT_TIMERINT2_3 2
diff --git a/include/asm-arm/arch-realview/scu.h b/include/asm-arm/arch-realview/scu.h
new file mode 100644
index 0000000..cc29364
--- /dev/null
+++ b/include/asm-arm/arch-realview/scu.h
@@ -0,0 +1,8 @@
+#ifndef __ASMARM_ARCH_SCU_H
+#define __ASMARM_ARCH_SCU_H
+
+#include <asm/arch/platform.h>
+
+#define SCU_BASE REALVIEW_MPCORE_SCU_BASE
+
+#endif
diff --git a/include/asm-arm/arch-s3c2410/dma.h b/include/asm-arm/arch-s3c2410/dma.h
index 58ffa7b..c6e8d8f 100644
--- a/include/asm-arm/arch-s3c2410/dma.h
+++ b/include/asm-arm/arch-s3c2410/dma.h
@@ -51,13 +51,19 @@
DMACH_UART0_SRC2, /* s3c2412 second uart sources */
DMACH_UART1_SRC2,
DMACH_UART2_SRC2,
+ DMACH_UART3, /* s3c2443 has extra uart */
+ DMACH_UART3_SRC2,
DMACH_MAX, /* the end entry */
};
#define DMACH_LOW_LEVEL (1<<28) /* use this to specifiy hardware ch no */
/* we have 4 dma channels */
-#define S3C2410_DMA_CHANNELS (4)
+#ifndef CONFIG_CPU_S3C2443
+#define S3C2410_DMA_CHANNELS (4)
+#else
+#define S3C2410_DMA_CHANNELS (6)
+#endif
/* types */
@@ -321,6 +327,7 @@
#define S3C2410_DMA_DCDST (0x1C)
#define S3C2410_DMA_DMASKTRIG (0x20)
#define S3C2412_DMA_DMAREQSEL (0x24)
+#define S3C2443_DMA_DMAREQSEL (0x24)
#define S3C2410_DISRCC_INC (1<<0)
#define S3C2410_DISRCC_APB (1<<1)
@@ -415,4 +422,31 @@
#define S3C2412_DMAREQSEL_UART2_1 S3C2412_DMAREQSEL_SRC(24)
#endif
+
+#define S3C2443_DMAREQSEL_SRC(x) ((x)<<1)
+
+#define S3C2443_DMAREQSEL_HW (1)
+
+#define S3C2443_DMAREQSEL_SPI0TX S3C2443_DMAREQSEL_SRC(0)
+#define S3C2443_DMAREQSEL_SPI0RX S3C2443_DMAREQSEL_SRC(1)
+#define S3C2443_DMAREQSEL_SPI1TX S3C2443_DMAREQSEL_SRC(2)
+#define S3C2443_DMAREQSEL_SPI1RX S3C2443_DMAREQSEL_SRC(3)
+#define S3C2443_DMAREQSEL_I2STX S3C2443_DMAREQSEL_SRC(4)
+#define S3C2443_DMAREQSEL_I2SRX S3C2443_DMAREQSEL_SRC(5)
+#define S3C2443_DMAREQSEL_TIMER S3C2443_DMAREQSEL_SRC(9)
+#define S3C2443_DMAREQSEL_SDI S3C2443_DMAREQSEL_SRC(10)
+#define S3C2443_DMAREQSEL_XDREQ0 S3C2443_DMAREQSEL_SRC(17)
+#define S3C2443_DMAREQSEL_XDREQ1 S3C2443_DMAREQSEL_SRC(18)
+#define S3C2443_DMAREQSEL_UART0_0 S3C2443_DMAREQSEL_SRC(19)
+#define S3C2443_DMAREQSEL_UART0_1 S3C2443_DMAREQSEL_SRC(20)
+#define S3C2443_DMAREQSEL_UART1_0 S3C2443_DMAREQSEL_SRC(21)
+#define S3C2443_DMAREQSEL_UART1_1 S3C2443_DMAREQSEL_SRC(22)
+#define S3C2443_DMAREQSEL_UART2_0 S3C2443_DMAREQSEL_SRC(23)
+#define S3C2443_DMAREQSEL_UART2_1 S3C2443_DMAREQSEL_SRC(24)
+#define S3C2443_DMAREQSEL_UART3_0 S3C2443_DMAREQSEL_SRC(25)
+#define S3C2443_DMAREQSEL_UART3_1 S3C2443_DMAREQSEL_SRC(26)
+#define S3C2443_DMAREQSEL_PCMOUT S3C2443_DMAREQSEL_SRC(27)
+#define S3C2443_DMAREQSEL_PCMIN S3C2443_DMAREQSEL_SRC(28)
+#define S3C2443_DMAREQSEL_MICIN S3C2443_DMAREQSEL_SRC(29)
+
#endif /* __ASM_ARCH_DMA_H */
diff --git a/include/asm-arm/arch-s3c2410/irqs.h b/include/asm-arm/arch-s3c2410/irqs.h
index 4b7cff4..c79cb18 100644
--- a/include/asm-arm/arch-s3c2410/irqs.h
+++ b/include/asm-arm/arch-s3c2410/irqs.h
@@ -34,10 +34,10 @@
#define IRQ_EINT4t7 S3C2410_IRQ(4) /* 20 */
#define IRQ_EINT8t23 S3C2410_IRQ(5)
#define IRQ_RESERVED6 S3C2410_IRQ(6) /* for s3c2410 */
-#define IRQ_CAM S3C2410_IRQ(6) /* for s3c2440 */
+#define IRQ_CAM S3C2410_IRQ(6) /* for s3c2440,s3c2443 */
#define IRQ_BATT_FLT S3C2410_IRQ(7)
#define IRQ_TICK S3C2410_IRQ(8) /* 24 */
-#define IRQ_WDT S3C2410_IRQ(9)
+#define IRQ_WDT S3C2410_IRQ(9) /* WDT/AC97 for s3c2443 */
#define IRQ_TIMER0 S3C2410_IRQ(10)
#define IRQ_TIMER1 S3C2410_IRQ(11)
#define IRQ_TIMER2 S3C2410_IRQ(12)
@@ -45,7 +45,7 @@
#define IRQ_TIMER4 S3C2410_IRQ(14)
#define IRQ_UART2 S3C2410_IRQ(15)
#define IRQ_LCD S3C2410_IRQ(16) /* 32 */
-#define IRQ_DMA0 S3C2410_IRQ(17)
+#define IRQ_DMA0 S3C2410_IRQ(17) /* IRQ_DMA for s3c2443 */
#define IRQ_DMA1 S3C2410_IRQ(18)
#define IRQ_DMA2 S3C2410_IRQ(19)
#define IRQ_DMA3 S3C2410_IRQ(20)
@@ -94,29 +94,63 @@
* these need to be ordered in number of appearance in the
* SUBSRC mask register
*/
-#define IRQ_S3CUART_RX0 S3C2410_IRQ(54) /* 70 */
-#define IRQ_S3CUART_TX0 S3C2410_IRQ(55) /* 71 */
-#define IRQ_S3CUART_ERR0 S3C2410_IRQ(56)
-#define IRQ_S3CUART_RX1 S3C2410_IRQ(57)
-#define IRQ_S3CUART_TX1 S3C2410_IRQ(58)
-#define IRQ_S3CUART_ERR1 S3C2410_IRQ(59)
+#define S3C2410_IRQSUB(x) S3C2410_IRQ((x)+54)
-#define IRQ_S3CUART_RX2 S3C2410_IRQ(60)
-#define IRQ_S3CUART_TX2 S3C2410_IRQ(61)
-#define IRQ_S3CUART_ERR2 S3C2410_IRQ(62)
+#define IRQ_S3CUART_RX0 S3C2410_IRQSUB(0) /* 70 */
+#define IRQ_S3CUART_TX0 S3C2410_IRQSUB(1)
+#define IRQ_S3CUART_ERR0 S3C2410_IRQSUB(2)
-#define IRQ_TC S3C2410_IRQ(63)
-#define IRQ_ADC S3C2410_IRQ(64)
+#define IRQ_S3CUART_RX1 S3C2410_IRQSUB(3) /* 73 */
+#define IRQ_S3CUART_TX1 S3C2410_IRQSUB(4)
+#define IRQ_S3CUART_ERR1 S3C2410_IRQSUB(5)
+
+#define IRQ_S3CUART_RX2 S3C2410_IRQSUB(6) /* 76 */
+#define IRQ_S3CUART_TX2 S3C2410_IRQSUB(7)
+#define IRQ_S3CUART_ERR2 S3C2410_IRQSUB(8)
+
+#define IRQ_TC S3C2410_IRQSUB(9)
+#define IRQ_ADC S3C2410_IRQSUB(10)
/* extra irqs for s3c2440 */
-#define IRQ_S3C2440_CAM_C S3C2410_IRQ(65)
-#define IRQ_S3C2440_CAM_P S3C2410_IRQ(66)
-#define IRQ_S3C2440_WDT S3C2410_IRQ(67)
-#define IRQ_S3C2440_AC97 S3C2410_IRQ(68)
+#define IRQ_S3C2440_CAM_C S3C2410_IRQSUB(11) /* S3C2443 too */
+#define IRQ_S3C2440_CAM_P S3C2410_IRQSUB(12) /* S3C2443 too */
+#define IRQ_S3C2440_WDT S3C2410_IRQSUB(13)
+#define IRQ_S3C2440_AC97 S3C2410_IRQSUB(14)
+/* irqs for s3c2443 */
+
+#define IRQ_S3C2443_DMA S3C2410_IRQ(17) /* IRQ_DMA1 */
+#define IRQ_S3C2443_UART3 S3C2410_IRQ(18) /* IRQ_DMA2 */
+#define IRQ_S3C2443_CFCON S3C2410_IRQ(19) /* IRQ_DMA3 */
+#define IRQ_S3C2443_SDI1 S3C2410_IRQ(20) /* IRQ_SDI */
+#define IRQ_S3C2443_NAND S3C2410_IRQ(24) /* reserved */
+
+#define IRQ_S3C2443_LCD1 S3C2410_IRQSUB(14)
+#define IRQ_S3C2443_LCD2 S3C2410_IRQSUB(15)
+#define IRQ_S3C2443_LCD3 S3C2410_IRQSUB(16)
+#define IRQ_S3C2443_LCD4 S3C2410_IRQSUB(17)
+
+#define IRQ_S3C2443_DMA0 S3C2410_IRQSUB(18)
+#define IRQ_S3C2443_DMA1 S3C2410_IRQSUB(19)
+#define IRQ_S3C2443_DMA2 S3C2410_IRQSUB(20)
+#define IRQ_S3C2443_DMA3 S3C2410_IRQSUB(21)
+#define IRQ_S3C2443_DMA4 S3C2410_IRQSUB(22)
+#define IRQ_S3C2443_DMA5 S3C2410_IRQSUB(23)
+
+/* UART3 */
+#define IRQ_S3C2443_RX3 S3C2410_IRQSUB(24)
+#define IRQ_S3C2443_TX3 S3C2410_IRQSUB(25)
+#define IRQ_S3C2443_ERR3 S3C2410_IRQSUB(26)
+
+#define IRQ_S3C2443_WDT S3C2410_IRQSUB(27)
+#define IRQ_S3C2443_AC97 S3C2410_IRQSUB(28)
+
+#ifdef CONFIG_CPU_S3C2443
+#define NR_IRQS (IRQ_S3C2443_AC97+1)
+#else
#define NR_IRQS (IRQ_S3C2440_AC97+1)
-
+#endif
#endif /* __ASM_ARCH_IRQ_H */
diff --git a/include/asm-arm/arch-s3c2410/regs-adc.h b/include/asm-arm/arch-s3c2410/regs-adc.h
index 3196a28..c7f2319 100644
--- a/include/asm-arm/arch-s3c2410/regs-adc.h
+++ b/include/asm-arm/arch-s3c2410/regs-adc.h
@@ -41,7 +41,7 @@
#define S3C2410_ADCTSC_XP_SEN (1<<4)
#define S3C2410_ADCTSC_PULL_UP_DISABLE (1<<3)
#define S3C2410_ADCTSC_AUTO_PST (1<<2)
-#define S3C2410_ADCTSC_XY_PST (0x3<<0)
+#define S3C2410_ADCTSC_XY_PST(x) (((x)&0x3)<<0)
/* ADCDAT0 Bits */
#define S3C2410_ADCDAT0_UPDOWN (1<<15)
diff --git a/include/asm-arm/arch-s3c2410/regs-gpio.h b/include/asm-arm/arch-s3c2410/regs-gpio.h
index eae9169..dea578b 100644
--- a/include/asm-arm/arch-s3c2410/regs-gpio.h
+++ b/include/asm-arm/arch-s3c2410/regs-gpio.h
@@ -201,7 +201,7 @@
#define S3C2400_GPBDAT S3C2410_GPIOREG(0x0C)
#define S3C2400_GPBUP S3C2410_GPIOREG(0x10)
-/* no i/o pin in port b can have value 3! */
+/* no i/o pin in port b can have value 3 (unless it is a s3c2443) ! */
#define S3C2410_GPB0 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 0)
#define S3C2410_GPB0_INP (0x00 << 0)
@@ -242,6 +242,7 @@
#define S3C2410_GPB5_INP (0x00 << 10)
#define S3C2410_GPB5_OUTP (0x01 << 10)
#define S3C2410_GPB5_nXBACK (0x02 << 10)
+#define S3C2443_GPB5_XBACK (0x03 << 10)
#define S3C2400_GPB5_DATA21 (0x02 << 10)
#define S3C2400_GPB5_nCTS1 (0x03 << 10)
@@ -249,6 +250,7 @@
#define S3C2410_GPB6_INP (0x00 << 12)
#define S3C2410_GPB6_OUTP (0x01 << 12)
#define S3C2410_GPB6_nXBREQ (0x02 << 12)
+#define S3C2443_GPB6_XBREQ (0x03 << 12)
#define S3C2400_GPB6_DATA22 (0x02 << 12)
#define S3C2400_GPB6_nRTS1 (0x03 << 12)
@@ -256,6 +258,7 @@
#define S3C2410_GPB7_INP (0x00 << 14)
#define S3C2410_GPB7_OUTP (0x01 << 14)
#define S3C2410_GPB7_nXDACK1 (0x02 << 14)
+#define S3C2443_GPB7_XDACK1 (0x03 << 14)
#define S3C2400_GPB7_DATA23 (0x02 << 14)
#define S3C2410_GPB8 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 8)
@@ -268,6 +271,7 @@
#define S3C2410_GPB9_INP (0x00 << 18)
#define S3C2410_GPB9_OUTP (0x01 << 18)
#define S3C2410_GPB9_nXDACK0 (0x02 << 18)
+#define S3C2443_GPB9_XDACK0 (0x03 << 18)
#define S3C2400_GPB9_DATA25 (0x02 << 18)
#define S3C2400_GPB9_I2SSDI (0x03 << 18)
@@ -275,6 +279,7 @@
#define S3C2410_GPB10_INP (0x00 << 20)
#define S3C2410_GPB10_OUTP (0x01 << 20)
#define S3C2410_GPB10_nXDRE0 (0x02 << 20)
+#define S3C2443_GPB10_XDREQ0 (0x03 << 20)
#define S3C2400_GPB10_DATA26 (0x02 << 20)
#define S3C2400_GPB10_nSS (0x03 << 20)
@@ -556,6 +561,7 @@
#define S3C2410_GPE0_INP (0x00 << 0)
#define S3C2410_GPE0_OUTP (0x01 << 0)
#define S3C2410_GPE0_I2SLRCK (0x02 << 0)
+#define S3C2443_GPE0_AC_nRESET (0x03 << 0)
#define S3C2400_GPE0_EINT0 (0x02 << 0)
#define S3C2410_GPE0_MASK (0x03 << 0)
@@ -563,6 +569,7 @@
#define S3C2410_GPE1_INP (0x00 << 2)
#define S3C2410_GPE1_OUTP (0x01 << 2)
#define S3C2410_GPE1_I2SSCLK (0x02 << 2)
+#define S3C2443_GPE1_AC_SYNC (0x03 << 2)
#define S3C2400_GPE1_EINT1 (0x02 << 2)
#define S3C2400_GPE1_nSS (0x03 << 2)
#define S3C2410_GPE1_MASK (0x03 << 2)
@@ -571,6 +578,7 @@
#define S3C2410_GPE2_INP (0x00 << 4)
#define S3C2410_GPE2_OUTP (0x01 << 4)
#define S3C2410_GPE2_CDCLK (0x02 << 4)
+#define S3C2443_GPE2_AC_BITCLK (0x03 << 4)
#define S3C2400_GPE2_EINT2 (0x02 << 4)
#define S3C2400_GPE2_I2SSDI (0x03 << 4)
@@ -578,6 +586,7 @@
#define S3C2410_GPE3_INP (0x00 << 6)
#define S3C2410_GPE3_OUTP (0x01 << 6)
#define S3C2410_GPE3_I2SSDI (0x02 << 6)
+#define S3C2443_GPE3_AC_SDI (0x03 << 6)
#define S3C2400_GPE3_EINT3 (0x02 << 6)
#define S3C2400_GPE3_nCTS1 (0x03 << 6)
#define S3C2410_GPE3_nSS0 (0x03 << 6)
@@ -587,6 +596,7 @@
#define S3C2410_GPE4_INP (0x00 << 8)
#define S3C2410_GPE4_OUTP (0x01 << 8)
#define S3C2410_GPE4_I2SSDO (0x02 << 8)
+#define S3C2443_GPE4_AC_SDO (0x03 << 8)
#define S3C2400_GPE4_EINT4 (0x02 << 8)
#define S3C2400_GPE4_nRTS1 (0x03 << 8)
#define S3C2410_GPE4_I2SSDI (0x03 << 8)
@@ -596,6 +606,7 @@
#define S3C2410_GPE5_INP (0x00 << 10)
#define S3C2410_GPE5_OUTP (0x01 << 10)
#define S3C2410_GPE5_SDCLK (0x02 << 10)
+#define S3C2443_GPE5_SD1_CLK (0x02 << 10)
#define S3C2400_GPE5_EINT5 (0x02 << 10)
#define S3C2400_GPE5_TCLK1 (0x03 << 10)
@@ -603,24 +614,32 @@
#define S3C2410_GPE6_INP (0x00 << 12)
#define S3C2410_GPE6_OUTP (0x01 << 12)
#define S3C2410_GPE6_SDCMD (0x02 << 12)
+#define S3C2443_GPE6_SD1_CMD (0x02 << 12)
+#define S3C2443_GPE6_AC_BITCLK (0x03 << 12)
#define S3C2400_GPE6_EINT6 (0x02 << 12)
#define S3C2410_GPE7 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 7)
#define S3C2410_GPE7_INP (0x00 << 14)
#define S3C2410_GPE7_OUTP (0x01 << 14)
#define S3C2410_GPE7_SDDAT0 (0x02 << 14)
+#define S3C2443_GPE5_SD1_DAT0 (0x02 << 14)
+#define S3C2443_GPE7_AC_SDI (0x03 << 14)
#define S3C2400_GPE7_EINT7 (0x02 << 14)
#define S3C2410_GPE8 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 8)
#define S3C2410_GPE8_INP (0x00 << 16)
#define S3C2410_GPE8_OUTP (0x01 << 16)
#define S3C2410_GPE8_SDDAT1 (0x02 << 16)
+#define S3C2443_GPE8_SD1_DAT1 (0x02 << 16)
+#define S3C2443_GPE8_AC_SDO (0x03 << 16)
#define S3C2400_GPE8_nXDACK0 (0x02 << 16)
#define S3C2410_GPE9 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 9)
#define S3C2410_GPE9_INP (0x00 << 18)
#define S3C2410_GPE9_OUTP (0x01 << 18)
#define S3C2410_GPE9_SDDAT2 (0x02 << 18)
+#define S3C2443_GPE9_SD1_DAT2 (0x02 << 18)
+#define S3C2443_GPE9_AC_SYNC (0x03 << 18)
#define S3C2400_GPE9_nXDACK1 (0x02 << 18)
#define S3C2400_GPE9_nXBACK (0x03 << 18)
@@ -628,6 +647,8 @@
#define S3C2410_GPE10_INP (0x00 << 20)
#define S3C2410_GPE10_OUTP (0x01 << 20)
#define S3C2410_GPE10_SDDAT3 (0x02 << 20)
+#define S3C2443_GPE10_SD1_DAT3 (0x02 << 20)
+#define S3C2443_GPE10_AC_nRESET (0x03 << 20)
#define S3C2400_GPE10_nXDREQ0 (0x02 << 20)
#define S3C2410_GPE11 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 11)
@@ -796,6 +817,7 @@
#define S3C2400_GPG4_MMCCLK (0x02 << 8)
#define S3C2400_GPG4_I2SSDI (0x03 << 8)
#define S3C2410_GPG4_LCDPWREN (0x03 << 8)
+#define S3C2443_GPG4_LCDPWRDN (0x03 << 8)
#define S3C2410_GPG5 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 5)
#define S3C2410_GPG5_INP (0x00 << 10)
@@ -803,7 +825,7 @@
#define S3C2410_GPG5_EINT13 (0x02 << 10)
#define S3C2400_GPG5_MMCCMD (0x02 << 10)
#define S3C2400_GPG5_IICSDA (0x03 << 10)
-#define S3C2410_GPG5_SPIMISO1 (0x03 << 10)
+#define S3C2410_GPG5_SPIMISO1 (0x03 << 10) /* not s3c2443 */
#define S3C2410_GPG6 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 6)
#define S3C2410_GPG6_INP (0x00 << 12)
@@ -845,6 +867,7 @@
#define S3C2410_GPG11_OUTP (0x01 << 22)
#define S3C2410_GPG11_EINT19 (0x02 << 22)
#define S3C2410_GPG11_TCLK1 (0x03 << 22)
+#define S3C2443_GPG11_CF_nIREQ (0x03 << 22)
#define S3C2410_GPG12 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 12)
#define S3C2410_GPG12_INP (0x00 << 24)
@@ -852,25 +875,28 @@
#define S3C2410_GPG12_EINT20 (0x02 << 24)
#define S3C2410_GPG12_XMON (0x03 << 24)
#define S3C2442_GPG12_nSPICS0 (0x03 << 24)
+#define S3C2443_GPG12_nINPACK (0x03 << 24)
#define S3C2410_GPG13 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 13)
#define S3C2410_GPG13_INP (0x00 << 26)
#define S3C2410_GPG13_OUTP (0x01 << 26)
#define S3C2410_GPG13_EINT21 (0x02 << 26)
#define S3C2410_GPG13_nXPON (0x03 << 26)
+#define S3C2443_GPG13_CF_nREG (0x03 << 26)
#define S3C2410_GPG14 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 14)
#define S3C2410_GPG14_INP (0x00 << 28)
#define S3C2410_GPG14_OUTP (0x01 << 28)
#define S3C2410_GPG14_EINT22 (0x02 << 28)
#define S3C2410_GPG14_YMON (0x03 << 28)
+#define S3C2443_GPG14_CF_RESET (0x03 << 28)
#define S3C2410_GPG15 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 15)
#define S3C2410_GPG15_INP (0x00 << 30)
#define S3C2410_GPG15_OUTP (0x01 << 30)
#define S3C2410_GPG15_EINT23 (0x02 << 30)
#define S3C2410_GPG15_nYPON (0x03 << 30)
-
+#define S3C2443_GPG15_CF_PWR (0x03 << 30)
#define S3C2410_GPG_PUPDIS(x) (1<<(x))
diff --git a/include/asm-arm/arch-s3c2410/regs-s3c2443-clock.h b/include/asm-arm/arch-s3c2410/regs-s3c2443-clock.h
new file mode 100644
index 0000000..ff0536d
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/regs-s3c2443-clock.h
@@ -0,0 +1,194 @@
+/* linux/include/asm-arm/arch-s3c2410/regs-clock.h
+ *
+ * Copyright (c) 2007 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2443 clock register definitions
+*/
+
+#ifndef __ASM_ARM_REGS_S3C2443_CLOCK
+#define __ASM_ARM_REGS_S3C2443_CLOCK
+
+#define S3C2443_CLKREG(x) ((x) + S3C24XX_VA_CLKPWR)
+
+#define S3C2443_PLLCON_MDIVSHIFT 16
+#define S3C2443_PLLCON_PDIVSHIFT 8
+#define S3C2443_PLLCON_SDIVSHIFT 0
+#define S3C2443_PLLCON_MDIVMASK ((1<<(1+(23-16)))-1)
+#define S3C2443_PLLCON_PDIVMASK ((1<<(1+(9-8)))-1)
+#define S3C2443_PLLCON_SDIVMASK (3)
+
+#define S3C2443_MPLLCON S3C2443_CLKREG(0x10)
+#define S3C2443_EPLLCON S3C2443_CLKREG(0x18)
+#define S3C2443_CLKSRC S3C2443_CLKREG(0x20)
+#define S3C2443_CLKDIV0 S3C2443_CLKREG(0x24)
+#define S3C2443_CLKDIV1 S3C2443_CLKREG(0x28)
+#define S3C2443_HCLKCON S3C2443_CLKREG(0x30)
+#define S3C2443_PCLKCON S3C2443_CLKREG(0x34)
+#define S3C2443_SCLKCON S3C2443_CLKREG(0x38)
+#define S3C2443_PWRMODE S3C2443_CLKREG(0x40)
+#define S3C2443_SWRST S3C2443_CLKREG(0x44)
+#define S3C2443_BUSPRI0 S3C2443_CLKREG(0x50)
+#define S3C2443_SYSID S3C2443_CLKREG(0x5C)
+#define S3C2443_PWRCFG S3C2443_CLKREG(0x60)
+#define S3C2443_RSTCON S3C2443_CLKREG(0x64)
+
+#define S3C2443_SWRST_RESET (0x533c2443)
+
+#define S3C2443_PLLCON_OFF (1<<24)
+
+#define S3C2443_CLKSRC_I2S_EXT (1<<14)
+#define S3C2443_CLKSRC_I2S_EPLLDIV (0<<14)
+#define S3C2443_CLKSRC_I2S_EPLLREF (2<<14)
+#define S3C2443_CLKSRC_I2S_EPLLREF3 (3<<14)
+#define S3C2443_CLKSRC_I2S_MASK (3<<14)
+
+#define S3C2443_CLKSRC_EPLLREF_XTAL (2<<8)
+#define S3C2443_CLKSRC_EPLLREF_EXTCLK (3<<8)
+#define S3C2443_CLKSRC_EPLLREF_MPLLREF (0<<8)
+#define S3C2443_CLKSRC_EPLLREF_MPLLREF2 (1<<8)
+#define S3C2443_CLKSRC_EPLLREF_MASK (3<<8)
+
+#define S3C2443_CLKSRC_ESYSCLK_EPLL (1<<6)
+#define S3C2443_CLKSRC_MSYSCLK_MPLL (1<<4)
+#define S3C2443_CLKSRC_EXTCLK_DIV (1<<3)
+
+#define S3C2443_CLKDIV0_DVS (1<<13)
+#define S3C2443_CLKDIV0_HALF_HCLK (1<<3)
+#define S3C2443_CLKDIV0_HALF_PCLK (1<<2)
+
+#define S3C2443_CLKDIV0_HCLKDIV_MASK (3<<0)
+
+#define S3C2443_CLKDIV0_EXTDIV_MASK (3<<6)
+#define S3C2443_CLKDIV0_EXTDIV_SHIFT (6)
+
+#define S3C2443_CLKDIV0_PREDIV_MASK (3<<4)
+#define S3C2443_CLKDIV0_PREDIV_SHIFT (4)
+
+#define S3C2443_CLKDIV0_ARMDIV_MASK (15<<9)
+#define S3C2443_CLKDIV0_ARMDIV_SHIFT (9)
+#define S3C2443_CLKDIV0_ARMDIV_1 (0<<9)
+#define S3C2443_CLKDIV0_ARMDIV_2 (8<<9)
+#define S3C2443_CLKDIV0_ARMDIV_3 (2<<9)
+#define S3C2443_CLKDIV0_ARMDIV_4 (9<<9)
+#define S3C2443_CLKDIV0_ARMDIV_6 (10<<9)
+#define S3C2443_CLKDIV0_ARMDIV_8 (11<<9)
+#define S3C2443_CLKDIV0_ARMDIV_12 (13<<9)
+#define S3C2443_CLKDIV0_ARMDIV_16 (15<<9)
+
+/* S3C2443_CLKDIV1 */
+
+#define S3C2443_CLKDIV1_CAMDIV_MASK (15<<26)
+#define S3C2443_CLKDIV1_CAMDIV_SHIFT (26)
+
+#define S3C2443_CLKDIV1_HSSPIDIV_MASK (3<<24)
+#define S3C2443_CLKDIV1_HSSPIDIV_SHIFT (24)
+
+#define S3C2443_CLKDIV1_DISPDIV_MASK (0xff<<16)
+#define S3C2443_CLKDIV1_DISPDIV_SHIFT (16)
+
+#define S3C2443_CLKDIV1_I2SDIV_MASK (15<<12)
+#define S3C2443_CLKDIV1_I2SDIV_SHIFT (12)
+
+#define S3C2443_CLKDIV1_UARTDIV_MASK (15<<8)
+#define S3C2443_CLKDIV1_UARTDIV_SHIFT (8)
+
+#define S3C2443_CLKDIV1_HSMMCDIV_MASK (3<<6)
+#define S3C2443_CLKDIV1_HSMMCDIV_SHIFT (6)
+
+#define S3C2443_CLKDIV1_USBHOSTDIV_MASK (3<<4)
+#define S3C2443_CLKDIV1_USBHOSTDIV_SHIFT (4)
+
+#define S3C2443_CLKCON_NAND
+
+#define S3C2443_HCLKCON_DMA0 (1<<0)
+#define S3C2443_HCLKCON_DMA1 (1<<1)
+#define S3C2443_HCLKCON_DMA2 (1<<2)
+#define S3C2443_HCLKCON_DMA3 (1<<3)
+#define S3C2443_HCLKCON_DMA4 (1<<4)
+#define S3C2443_HCLKCON_DMA5 (1<<5)
+#define S3C2443_HCLKCON_CAMIF (1<<8)
+#define S3C2443_HCLKCON_DISP (1<<9)
+#define S3C2443_HCLKCON_LCDC (1<<10)
+#define S3C2443_HCLKCON_USBH (1<<11)
+#define S3C2443_HCLKCON_USBD (1<<12)
+#define S3C2443_HCLKCON_HSMMC (1<<16)
+#define S3C2443_HCLKCON_CFC (1<<17)
+#define S3C2443_HCLKCON_SSMC (1<<18)
+#define S3C2443_HCLKCON_DRAMC (1<<19)
+
+#define S3C2443_PCLKCON_UART0 (1<<0)
+#define S3C2443_PCLKCON_UART1 (1<<1)
+#define S3C2443_PCLKCON_UART2 (1<<2)
+#define S3C2443_PCLKCON_UART3 (1<<3)
+#define S3C2443_PCLKCON_IIC (1<<4)
+#define S3C2443_PCLKCON_SDI (1<<5)
+#define S3C2443_PCLKCON_ADC (1<<7)
+#define S3C2443_PCLKCON_IIS (1<<9)
+#define S3C2443_PCLKCON_PWMT (1<<10)
+#define S3C2443_PCLKCON_WDT (1<<11)
+#define S3C2443_PCLKCON_RTC (1<<12)
+#define S3C2443_PCLKCON_GPIO (1<<13)
+#define S3C2443_PCLKCON_SPI0 (1<<14)
+#define S3C2443_PCLKCON_SPI1 (1<<15)
+
+#define S3C2443_SCLKCON_DDRCLK (1<<16)
+#define S3C2443_SCLKCON_SSMCCLK (1<<15)
+#define S3C2443_SCLKCON_HSSPICLK (1<<14)
+#define S3C2443_SCLKCON_HSMMCCLK_EXT (1<<13)
+#define S3C2443_SCLKCON_HSMMCCLK_EPLL (1<<12)
+#define S3C2443_SCLKCON_CAMCLK (1<<11)
+#define S3C2443_SCLKCON_DISPCLK (1<<10)
+#define S3C2443_SCLKCON_I2SCLK (1<<9)
+#define S3C2443_SCLKCON_UARTCLK (1<<8)
+#define S3C2443_SCLKCON_USBHOST (1<<1)
+
+#include <asm/div64.h>
+
+static inline unsigned int
+s3c2443_get_mpll(unsigned int pllval, unsigned int baseclk)
+{
+ unsigned int mdiv, pdiv, sdiv;
+ uint64_t fvco;
+
+ mdiv = pllval >> S3C2443_PLLCON_MDIVSHIFT;
+ pdiv = pllval >> S3C2443_PLLCON_PDIVSHIFT;
+ sdiv = pllval >> S3C2443_PLLCON_SDIVSHIFT;
+
+ mdiv &= S3C2443_PLLCON_MDIVMASK;
+ pdiv &= S3C2443_PLLCON_PDIVMASK;
+ sdiv &= S3C2443_PLLCON_SDIVMASK;
+
+ fvco = (uint64_t)baseclk * (2 * (mdiv + 8));
+ do_div(fvco, pdiv << sdiv);
+
+ return (unsigned int)fvco;
+}
+
+static inline unsigned int
+s3c2443_get_epll(unsigned int pllval, unsigned int baseclk)
+{
+ unsigned int mdiv, pdiv, sdiv;
+ uint64_t fvco;
+
+ mdiv = pllval >> S3C2443_PLLCON_MDIVSHIFT;
+ pdiv = pllval >> S3C2443_PLLCON_PDIVSHIFT;
+ sdiv = pllval >> S3C2443_PLLCON_SDIVSHIFT;
+
+ mdiv &= S3C2443_PLLCON_MDIVMASK;
+ pdiv &= S3C2443_PLLCON_PDIVMASK;
+ sdiv &= S3C2443_PLLCON_SDIVMASK;
+
+ fvco = (uint64_t)baseclk * (mdiv + 8);
+ do_div(fvco, (pdiv + 2) << sdiv);
+
+ return (unsigned int)fvco;
+}
+
+#endif /* __ASM_ARM_REGS_S3C2443_CLOCK */
+
diff --git a/include/asm-arm/arch-s3c2410/regs-serial.h b/include/asm-arm/arch-s3c2410/regs-serial.h
index 46f5240..8946702 100644
--- a/include/asm-arm/arch-s3c2410/regs-serial.h
+++ b/include/asm-arm/arch-s3c2410/regs-serial.h
@@ -35,10 +35,12 @@
#define S3C24XX_VA_UART0 (S3C24XX_VA_UART)
#define S3C24XX_VA_UART1 (S3C24XX_VA_UART + 0x4000 )
#define S3C24XX_VA_UART2 (S3C24XX_VA_UART + 0x8000 )
+#define S3C24XX_VA_UART3 (S3C24XX_VA_UART + 0xC000 )
#define S3C2410_PA_UART0 (S3C24XX_PA_UART)
#define S3C2410_PA_UART1 (S3C24XX_PA_UART + 0x4000 )
#define S3C2410_PA_UART2 (S3C24XX_PA_UART + 0x8000 )
+#define S3C2443_PA_UART3 (S3C24XX_PA_UART + 0xC000 )
#define S3C2410_URXH (0x24)
#define S3C2410_UTXH (0x20)
@@ -73,6 +75,8 @@
#define S3C2440_UCON_UCLK (1<<10)
#define S3C2440_UCON_PCLK2 (2<<10)
#define S3C2440_UCON_FCLK (3<<10)
+#define S3C2443_UCON_EPLL (3<<10)
+
#define S3C2440_UCON2_FCLK_EN (1<<15)
#define S3C2440_UCON0_DIVMASK (15 << 12)
#define S3C2440_UCON1_DIVMASK (15 << 12)
@@ -93,6 +97,8 @@
#define S3C2410_UCON_TXIRQMODE (1<<2)
#define S3C2410_UCON_RXIRQMODE (1<<0)
#define S3C2410_UCON_RXFIFO_TOI (1<<7)
+#define S3C2443_UCON_RXERR_IRQEN (1<<6)
+#define S3C2443_UCON_LOOPBACK (1<<5)
#define S3C2410_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
@@ -127,7 +133,7 @@
#define S3C2410_UMCOM_AFC (1<<4)
#define S3C2410_UMCOM_RTS_LOW (1<<0)
-#define S3C2412_UMCON_AFC_63 (0<<5)
+#define S3C2412_UMCON_AFC_63 (0<<5) /* same as s3c2443 */
#define S3C2412_UMCON_AFC_56 (1<<5)
#define S3C2412_UMCON_AFC_48 (2<<5)
#define S3C2412_UMCON_AFC_40 (3<<5)
@@ -143,6 +149,7 @@
#define S3C2410_UFSTAT_RXMASK (15<<0)
#define S3C2410_UFSTAT_RXSHIFT (0)
+/* UFSTAT S3C2443 same as S3C2440 */
#define S3C2440_UFSTAT_TXFULL (1<<14)
#define S3C2440_UFSTAT_RXFULL (1<<6)
#define S3C2440_UFSTAT_TXSHIFT (8)
@@ -157,6 +164,8 @@
#define S3C2410_UERSTAT_OVERRUN (1<<0)
#define S3C2410_UERSTAT_FRAME (1<<2)
#define S3C2410_UERSTAT_BREAK (1<<3)
+#define S3C2443_UERSTAT_PARITY (1<<1)
+
#define S3C2410_UERSTAT_ANY (S3C2410_UERSTAT_OVERRUN | \
S3C2410_UERSTAT_FRAME | \
S3C2410_UERSTAT_BREAK)
@@ -164,6 +173,8 @@
#define S3C2410_UMSTAT_CTS (1<<0)
#define S3C2410_UMSTAT_DeltaCTS (1<<2)
+#define S3C2443_DIVSLOT (0x2C)
+
#ifndef __ASSEMBLY__
/* struct s3c24xx_uart_clksrc
diff --git a/include/asm-arm/arch-s3c2410/reset.h b/include/asm-arm/arch-s3c2410/reset.h
new file mode 100644
index 0000000..4f866cd
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/reset.h
@@ -0,0 +1,22 @@
+/* linux/include/asm-arm/arch-s3c2410/reset.h
+ *
+ * Copyright (c) 2007 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 CPU reset controls
+*/
+
+#ifndef __ASM_ARCH_RESET_H
+#define __ASM_ARCH_RESET_H __FILE__
+
+/* This allows the over-ride of the default reset code
+*/
+
+extern void (*s3c24xx_reset_hook)(void);
+
+#endif /* __ASM_ARCH_RESET_H */
diff --git a/include/asm-arm/arch-s3c2410/system.h b/include/asm-arm/arch-s3c2410/system.h
index ecf250d..1c74ef1 100644
--- a/include/asm-arm/arch-s3c2410/system.h
+++ b/include/asm-arm/arch-s3c2410/system.h
@@ -15,15 +15,16 @@
#include <asm/arch/map.h>
#include <asm/arch/idle.h>
+#include <asm/arch/reset.h>
#include <asm/arch/regs-watchdog.h>
#include <asm/arch/regs-clock.h>
void (*s3c24xx_idle)(void);
+void (*s3c24xx_reset_hook)(void);
void s3c24xx_default_idle(void)
{
- void __iomem *reg = S3C2410_CLKCON;
unsigned long tmp;
int i;
@@ -33,16 +34,18 @@
/* Warning: going into idle state upsets jtag scanning */
- __raw_writel(__raw_readl(reg) | (1<<2), reg);
+ __raw_writel(__raw_readl(S3C2410_CLKCON) | S3C2410_CLKCON_IDLE,
+ S3C2410_CLKCON);
/* the samsung port seems to do a loop and then unset idle.. */
for (i = 0; i < 50; i++) {
- tmp += __raw_readl(reg); /* ensure loop not optimised out */
+ tmp += __raw_readl(S3C2410_CLKCON); /* ensure loop not optimised out */
}
/* this bit is not cleared on re-start... */
- __raw_writel(__raw_readl(reg) & ~(1<<2), reg);
+ __raw_writel(__raw_readl(S3C2410_CLKCON) & ~S3C2410_CLKCON_IDLE,
+ S3C2410_CLKCON);
}
static void arch_idle(void)
@@ -53,7 +56,6 @@
s3c24xx_default_idle();
}
-
static void
arch_reset(char mode)
{
@@ -61,6 +63,9 @@
cpu_reset(0);
}
+ if (s3c24xx_reset_hook)
+ s3c24xx_reset_hook();
+
printk("arch_reset: attempting watchdog reset\n");
__raw_writel(0, S3C2410_WTCON); /* disable watchdog, to be safe */
diff --git a/include/asm-arm/arch-s3c2410/udc.h b/include/asm-arm/arch-s3c2410/udc.h
new file mode 100644
index 0000000..e59ec33
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/udc.h
@@ -0,0 +1,36 @@
+/* linux/include/asm/arch-s3c2410/udc.h
+ *
+ * Copyright (c) 2005 Arnaud Patard <arnaud.patard@rtp-net.org>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *
+ * Changelog:
+ * 14-Mar-2005 RTP Created file
+ * 02-Aug-2005 RTP File rename
+ * 07-Sep-2005 BJD Minor cleanups, changed cmd to enum
+ * 18-Jan-2007 HMW Add per-platform vbus_draw function
+*/
+
+#ifndef __ASM_ARM_ARCH_UDC_H
+#define __ASM_ARM_ARCH_UDC_H
+
+enum s3c2410_udc_cmd_e {
+ S3C2410_UDC_P_ENABLE = 1, /* Pull-up enable */
+ S3C2410_UDC_P_DISABLE = 2, /* Pull-up disable */
+ S3C2410_UDC_P_RESET = 3, /* UDC reset, in case of */
+};
+
+struct s3c2410_udc_mach_info {
+ void (*udc_command)(enum s3c2410_udc_cmd_e);
+ void (*vbus_draw)(unsigned int ma);
+ unsigned int vbus_pin;
+ unsigned char vbus_pin_inverted;
+};
+
+extern void __init s3c24xx_udc_set_platdata(struct s3c2410_udc_mach_info *);
+
+#endif /* __ASM_ARM_ARCH_UDC_H */
diff --git a/include/asm-arm/cacheflush.h b/include/asm-arm/cacheflush.h
index 5f531ea..afad32c 100644
--- a/include/asm-arm/cacheflush.h
+++ b/include/asm-arm/cacheflush.h
@@ -185,9 +185,15 @@
void (*coherent_user_range)(unsigned long, unsigned long);
void (*flush_kern_dcache_page)(void *);
- void (*dma_inv_range)(unsigned long, unsigned long);
- void (*dma_clean_range)(unsigned long, unsigned long);
- void (*dma_flush_range)(unsigned long, unsigned long);
+ void (*dma_inv_range)(const void *, const void *);
+ void (*dma_clean_range)(const void *, const void *);
+ void (*dma_flush_range)(const void *, const void *);
+};
+
+struct outer_cache_fns {
+ void (*inv_range)(unsigned long, unsigned long);
+ void (*clean_range)(unsigned long, unsigned long);
+ void (*flush_range)(unsigned long, unsigned long);
};
/*
@@ -240,9 +246,40 @@
#define dmac_clean_range __glue(_CACHE,_dma_clean_range)
#define dmac_flush_range __glue(_CACHE,_dma_flush_range)
-extern void dmac_inv_range(unsigned long, unsigned long);
-extern void dmac_clean_range(unsigned long, unsigned long);
-extern void dmac_flush_range(unsigned long, unsigned long);
+extern void dmac_inv_range(const void *, const void *);
+extern void dmac_clean_range(const void *, const void *);
+extern void dmac_flush_range(const void *, const void *);
+
+#endif
+
+#ifdef CONFIG_OUTER_CACHE
+
+extern struct outer_cache_fns outer_cache;
+
+static inline void outer_inv_range(unsigned long start, unsigned long end)
+{
+ if (outer_cache.inv_range)
+ outer_cache.inv_range(start, end);
+}
+static inline void outer_clean_range(unsigned long start, unsigned long end)
+{
+ if (outer_cache.clean_range)
+ outer_cache.clean_range(start, end);
+}
+static inline void outer_flush_range(unsigned long start, unsigned long end)
+{
+ if (outer_cache.flush_range)
+ outer_cache.flush_range(start, end);
+}
+
+#else
+
+static inline void outer_inv_range(unsigned long start, unsigned long end)
+{ }
+static inline void outer_clean_range(unsigned long start, unsigned long end)
+{ }
+static inline void outer_flush_range(unsigned long start, unsigned long end)
+{ }
#endif
diff --git a/include/asm-arm/checksum.h b/include/asm-arm/checksum.h
index 8c0bb5b..eaa0efd 100644
--- a/include/asm-arm/checksum.h
+++ b/include/asm-arm/checksum.h
@@ -40,13 +40,27 @@
csum_partial_copy_from_user(const void __user *src, void *dst, int len, __wsum sum, int *err_ptr);
/*
+ * Fold a partial checksum without adding pseudo headers
+ */
+static inline __sum16 csum_fold(__wsum sum)
+{
+ __asm__(
+ "add %0, %1, %1, ror #16 @ csum_fold"
+ : "=r" (sum)
+ : "r" (sum)
+ : "cc");
+ return (__force __sum16)(~(__force u32)sum >> 16);
+}
+
+/*
* This is a version of ip_compute_csum() optimized for IP headers,
* which always checksum on 4 octet boundaries.
*/
static inline __sum16
ip_fast_csum(const void *iph, unsigned int ihl)
{
- unsigned int sum, tmp1;
+ unsigned int tmp1;
+ __wsum sum;
__asm__ __volatile__(
"ldr %0, [%1], #4 @ ip_fast_csum \n\
@@ -62,29 +76,11 @@
subne %2, %2, #1 @ without destroying \n\
bne 1b @ the carry flag \n\
adcs %0, %0, %3 \n\
- adc %0, %0, #0 \n\
- adds %0, %0, %0, lsl #16 \n\
- addcs %0, %0, #0x10000 \n\
- mvn %0, %0 \n\
- mov %0, %0, lsr #16"
+ adc %0, %0, #0"
: "=r" (sum), "=r" (iph), "=r" (ihl), "=r" (tmp1)
: "1" (iph), "2" (ihl)
: "cc", "memory");
- return (__force __sum16)sum;
-}
-
-/*
- * Fold a partial checksum without adding pseudo headers
- */
-static inline __sum16 csum_fold(__wsum sum)
-{
- __asm__(
- "adds %0, %1, %1, lsl #16 @ csum_fold \n\
- addcs %0, %0, #0x10000"
- : "=r" (sum)
- : "r" (sum)
- : "cc");
- return (__force __sum16)(~(__force u32)sum >> 16);
+ return csum_fold(sum);
}
static inline __wsum
@@ -114,23 +110,7 @@
csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len,
unsigned short proto, __wsum sum)
{
- __asm__(
- "adds %0, %1, %2 @ csum_tcpudp_magic \n\
- adcs %0, %0, %3 \n"
-#ifdef __ARMEB__
- "adcs %0, %0, %4 \n"
-#else
- "adcs %0, %0, %4, lsl #8 \n"
-#endif
- "adcs %0, %0, %5 \n\
- adc %0, %0, #0 \n\
- adds %0, %0, %0, lsl #16 \n\
- addcs %0, %0, #0x10000 \n\
- mvn %0, %0"
- : "=&r"(sum)
- : "r" (sum), "r" (daddr), "r" (saddr), "r" (len), "Ir" (htons(proto))
- : "cc");
- return (__force __sum16)((__force u32)sum >> 16);
+ return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum));
}
diff --git a/include/asm-arm/device.h b/include/asm-arm/device.h
index d8f9872..c61642b 100644
--- a/include/asm-arm/device.h
+++ b/include/asm-arm/device.h
@@ -3,5 +3,13 @@
*
* This file is released under the GPLv2
*/
-#include <asm-generic/device.h>
+#ifndef ASMARM_DEVICE_H
+#define ASMARM_DEVICE_H
+struct dev_archdata {
+#ifdef CONFIG_DMABOUNCE
+ struct dmabounce_device_info *dmabounce;
+#endif
+};
+
+#endif
diff --git a/include/asm-arm/dma-mapping.h b/include/asm-arm/dma-mapping.h
index 9bc46b4..abfb75b 100644
--- a/include/asm-arm/dma-mapping.h
+++ b/include/asm-arm/dma-mapping.h
@@ -17,7 +17,7 @@
* platforms with CONFIG_DMABOUNCE.
* Use the driver DMA support - see dma-mapping.h (dma_sync_*)
*/
-extern void consistent_sync(void *kaddr, size_t size, int rw);
+extern void consistent_sync(const void *kaddr, size_t size, int rw);
/*
* Return whether the given device DMA address mask can be supported
@@ -61,6 +61,22 @@
return dma_addr == ~0;
}
+/*
+ * Dummy noncoherent implementation. We don't provide a dma_cache_sync
+ * function so drivers using this API are highlighted with build warnings.
+ */
+static inline void *
+dma_alloc_noncoherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp)
+{
+ return NULL;
+}
+
+static inline void
+dma_free_noncoherent(struct device *dev, size_t size, void *cpu_addr,
+ dma_addr_t handle)
+{
+}
+
/**
* dma_alloc_coherent - allocate consistent memory for DMA
* @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
diff --git a/include/asm-arm/domain.h b/include/asm-arm/domain.h
index 4c2885a..3c12a76 100644
--- a/include/asm-arm/domain.h
+++ b/include/asm-arm/domain.h
@@ -57,6 +57,7 @@
__asm__ __volatile__( \
"mcr p15, 0, %0, c3, c0 @ set domain" \
: : "r" (x)); \
+ isb(); \
} while (0)
#define modify_domain(dom,type) \
diff --git a/include/asm-arm/hardware/arm_scu.h b/include/asm-arm/hardware/arm_scu.h
index 9903f60..7d28eb5 100644
--- a/include/asm-arm/hardware/arm_scu.h
+++ b/include/asm-arm/hardware/arm_scu.h
@@ -1,6 +1,8 @@
#ifndef ASMARM_HARDWARE_ARM_SCU_H
#define ASMARM_HARDWARE_ARM_SCU_H
+#include <asm/arch/scu.h>
+
/*
* SCU registers
*/
diff --git a/include/asm-arm/hardware/cache-l2x0.h b/include/asm-arm/hardware/cache-l2x0.h
new file mode 100644
index 0000000..54029a7
--- /dev/null
+++ b/include/asm-arm/hardware/cache-l2x0.h
@@ -0,0 +1,56 @@
+/*
+ * include/asm-arm/hardware/cache-l2x0.h
+ *
+ * Copyright (C) 2007 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARM_HARDWARE_L2X0_H
+#define __ASM_ARM_HARDWARE_L2X0_H
+
+#define L2X0_CACHE_ID 0x000
+#define L2X0_CACHE_TYPE 0x004
+#define L2X0_CTRL 0x100
+#define L2X0_AUX_CTRL 0x104
+#define L2X0_EVENT_CNT_CTRL 0x200
+#define L2X0_EVENT_CNT1_CFG 0x204
+#define L2X0_EVENT_CNT0_CFG 0x208
+#define L2X0_EVENT_CNT1_VAL 0x20C
+#define L2X0_EVENT_CNT0_VAL 0x210
+#define L2X0_INTR_MASK 0x214
+#define L2X0_MASKED_INTR_STAT 0x218
+#define L2X0_RAW_INTR_STAT 0x21C
+#define L2X0_INTR_CLEAR 0x220
+#define L2X0_CACHE_SYNC 0x730
+#define L2X0_INV_LINE_PA 0x770
+#define L2X0_INV_WAY 0x77C
+#define L2X0_CLEAN_LINE_PA 0x7B0
+#define L2X0_CLEAN_LINE_IDX 0x7B8
+#define L2X0_CLEAN_WAY 0x7BC
+#define L2X0_CLEAN_INV_LINE_PA 0x7F0
+#define L2X0_CLEAN_INV_LINE_IDX 0x7F8
+#define L2X0_CLEAN_INV_WAY 0x7FC
+#define L2X0_LOCKDOWN_WAY_D 0x900
+#define L2X0_LOCKDOWN_WAY_I 0x904
+#define L2X0_TEST_OPERATION 0xF00
+#define L2X0_LINE_DATA 0xF10
+#define L2X0_LINE_TAG 0xF30
+#define L2X0_DEBUG_CTRL 0xF40
+
+#ifndef __ASSEMBLY__
+extern void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask);
+#endif
+
+#endif
diff --git a/include/asm-arm/hardware/gic.h b/include/asm-arm/hardware/gic.h
index 3fa5eb7..966e428 100644
--- a/include/asm-arm/hardware/gic.h
+++ b/include/asm-arm/hardware/gic.h
@@ -33,8 +33,9 @@
#define GIC_DIST_SOFTINT 0xf00
#ifndef __ASSEMBLY__
-void gic_dist_init(void __iomem *base);
-void gic_cpu_init(void __iomem *base);
+void gic_dist_init(unsigned int gic_nr, void __iomem *base, unsigned int irq_start);
+void gic_cpu_init(unsigned int gic_nr, void __iomem *base);
+void gic_cascade_irq(unsigned int gic_nr, unsigned int irq);
void gic_raise_softirq(cpumask_t cpumask, unsigned int irq);
#endif
diff --git a/include/asm-arm/hardware/iop3xx.h b/include/asm-arm/hardware/iop3xx.h
index 13ac8a4..c91b546 100644
--- a/include/asm-arm/hardware/iop3xx.h
+++ b/include/asm-arm/hardware/iop3xx.h
@@ -37,6 +37,13 @@
#define IOP3XX_PERIPHERAL_PHYS_BASE 0xffffe000
#define IOP3XX_PERIPHERAL_VIRT_BASE 0xfeffe000
#define IOP3XX_PERIPHERAL_SIZE 0x00002000
+#define IOP3XX_PERIPHERAL_UPPER_PA (IOP3XX_PERIPHERAL_PHYS_BASE +\
+ IOP3XX_PERIPHERAL_SIZE - 1)
+#define IOP3XX_PERIPHERAL_UPPER_VA (IOP3XX_PERIPHERAL_VIRT_BASE +\
+ IOP3XX_PERIPHERAL_SIZE - 1)
+#define IOP3XX_PMMR_PHYS_TO_VIRT(addr) (u32) ((u32) addr -\
+ (IOP3XX_PERIPHERAL_PHYS_BASE\
+ - IOP3XX_PERIPHERAL_VIRT_BASE))
#define IOP3XX_REG_ADDR(reg) (IOP3XX_PERIPHERAL_VIRT_BASE + (reg))
/* Address Translation Unit */
@@ -258,12 +265,20 @@
#define IOP3XX_PCI_LOWER_IO_PA 0x90000000
#define IOP3XX_PCI_LOWER_IO_VA 0xfe000000
#define IOP3XX_PCI_LOWER_IO_BA (*IOP3XX_OIOWTVR)
+#define IOP3XX_PCI_UPPER_IO_PA (IOP3XX_PCI_LOWER_IO_PA +\
+ IOP3XX_PCI_IO_WINDOW_SIZE - 1)
+#define IOP3XX_PCI_UPPER_IO_VA (IOP3XX_PCI_LOWER_IO_VA +\
+ IOP3XX_PCI_IO_WINDOW_SIZE - 1)
+#define IOP3XX_PCI_IO_PHYS_TO_VIRT(addr) (((u32) addr -\
+ IOP3XX_PCI_LOWER_IO_PA) +\
+ IOP3XX_PCI_LOWER_IO_VA)
#ifndef __ASSEMBLY__
void iop3xx_map_io(void);
void iop3xx_init_time(unsigned long);
unsigned long iop3xx_gettimeoffset(void);
+void iop_init_cp6_handler(void);
extern struct platform_device iop3xx_i2c0_device;
extern struct platform_device iop3xx_i2c1_device;
diff --git a/include/asm-arm/hardware/sa1111.h b/include/asm-arm/hardware/sa1111.h
index 6aa0a5b..61b1d05 100644
--- a/include/asm-arm/hardware/sa1111.h
+++ b/include/asm-arm/hardware/sa1111.h
@@ -29,6 +29,9 @@
#define _SA1111(x) ((x) + sa1111->resource.start)
#endif
+#define sa1111_writel(val,addr) __raw_writel(val, addr)
+#define sa1111_readl(addr) __raw_readl(addr)
+
/*
* 26 bits of the SA-1110 address bus are available to the SA-1111.
* Use these when feeding target addresses to the DMA engines.
@@ -45,14 +48,6 @@
#define SA1111_SAC_DMA_MIN_XFER (0x800)
/*
- * SA1111 register definitions.
- */
-#define __CCREG(x) __REGP(SA1111_VBASE + (x))
-
-#define sa1111_writel(val,addr) __raw_writel(val, addr)
-#define sa1111_readl(addr) __raw_readl(addr)
-
-/*
* System Bus Interface (SBI)
*
* Registers
@@ -194,55 +189,37 @@
* SADR Serial Audio Data Register (16 x 32-bit)
*/
-#define _SACR0 _SA1111( 0x0600 )
-#define _SACR1 _SA1111( 0x0604 )
-#define _SACR2 _SA1111( 0x0608 )
-#define _SASR0 _SA1111( 0x060c )
-#define _SASR1 _SA1111( 0x0610 )
-#define _SASCR _SA1111( 0x0618 )
-#define _L3_CAR _SA1111( 0x061c )
-#define _L3_CDR _SA1111( 0x0620 )
-#define _ACCAR _SA1111( 0x0624 )
-#define _ACCDR _SA1111( 0x0628 )
-#define _ACSAR _SA1111( 0x062c )
-#define _ACSDR _SA1111( 0x0630 )
-#define _SADTCS _SA1111( 0x0634 )
-#define _SADTSA _SA1111( 0x0638 )
-#define _SADTCA _SA1111( 0x063c )
-#define _SADTSB _SA1111( 0x0640 )
-#define _SADTCB _SA1111( 0x0644 )
-#define _SADRCS _SA1111( 0x0648 )
-#define _SADRSA _SA1111( 0x064c )
-#define _SADRCA _SA1111( 0x0650 )
-#define _SADRSB _SA1111( 0x0654 )
-#define _SADRCB _SA1111( 0x0658 )
-#define _SAITR _SA1111( 0x065c )
-#define _SADR _SA1111( 0x0680 )
+#define SA1111_SERAUDIO 0x0600
-#define SACR0 __CCREG(0x0600)
-#define SACR1 __CCREG(0x0604)
-#define SACR2 __CCREG(0x0608)
-#define SASR0 __CCREG(0x060c)
-#define SASR1 __CCREG(0x0610)
-#define SASCR __CCREG(0x0618)
-#define L3_CAR __CCREG(0x061c)
-#define L3_CDR __CCREG(0x0620)
-#define ACCAR __CCREG(0x0624)
-#define ACCDR __CCREG(0x0628)
-#define ACSAR __CCREG(0x062c)
-#define ACSDR __CCREG(0x0630)
-#define SADTCS __CCREG(0x0634)
-#define SADTSA __CCREG(0x0638)
-#define SADTCA __CCREG(0x063c)
-#define SADTSB __CCREG(0x0640)
-#define SADTCB __CCREG(0x0644)
-#define SADRCS __CCREG(0x0648)
-#define SADRSA __CCREG(0x064c)
-#define SADRCA __CCREG(0x0650)
-#define SADRSB __CCREG(0x0654)
-#define SADRCB __CCREG(0x0658)
-#define SAITR __CCREG(0x065c)
-#define SADR __CCREG(0x0680)
+/*
+ * These are offsets from the above base.
+ */
+#define SA1111_SACR0 0x00
+#define SA1111_SACR1 0x04
+#define SA1111_SACR2 0x08
+#define SA1111_SASR0 0x0c
+#define SA1111_SASR1 0x10
+#define SA1111_SASCR 0x18
+#define SA1111_L3_CAR 0x1c
+#define SA1111_L3_CDR 0x20
+#define SA1111_ACCAR 0x24
+#define SA1111_ACCDR 0x28
+#define SA1111_ACSAR 0x2c
+#define SA1111_ACSDR 0x30
+#define SA1111_SADTCS 0x34
+#define SA1111_SADTSA 0x38
+#define SA1111_SADTCA 0x3c
+#define SA1111_SADTSB 0x40
+#define SA1111_SADTCB 0x44
+#define SA1111_SADRCS 0x48
+#define SA1111_SADRSA 0x4c
+#define SA1111_SADRCA 0x50
+#define SA1111_SADRSB 0x54
+#define SA1111_SADRCB 0x58
+#define SA1111_SAITR 0x5c
+#define SA1111_SADR 0x80
+
+#ifndef CONFIG_ARCH_PXA
#define SACR0_ENB (1<<0)
#define SACR0_BCKD (1<<2)
@@ -330,6 +307,8 @@
#define SAITR_RDBDA (1<<10)
#define SAITR_RDBDB (1<<11)
+#endif /* !CONFIG_ARCH_PXA */
+
/*
* General-Purpose I/O Interface
*
diff --git a/include/asm-arm/kexec.h b/include/asm-arm/kexec.h
new file mode 100644
index 0000000..8c1c616
--- /dev/null
+++ b/include/asm-arm/kexec.h
@@ -0,0 +1,30 @@
+#ifndef _ARM_KEXEC_H
+#define _ARM_KEXEC_H
+
+#ifdef CONFIG_KEXEC
+
+/* Maximum physical address we can use pages from */
+#define KEXEC_SOURCE_MEMORY_LIMIT (-1UL)
+/* Maximum address we can reach in physical address mode */
+#define KEXEC_DESTINATION_MEMORY_LIMIT (-1UL)
+/* Maximum address we can use for the control code buffer */
+#define KEXEC_CONTROL_MEMORY_LIMIT TASK_SIZE
+
+#define KEXEC_CONTROL_CODE_SIZE 4096
+
+#define KEXEC_ARCH KEXEC_ARCH_ARM
+
+#ifndef __ASSEMBLY__
+
+#define MAX_NOTE_BYTES 1024
+
+struct kimage;
+/* Provide a dummy definition to avoid build failures. */
+static inline void crash_setup_regs(struct pt_regs *newregs,
+ struct pt_regs *oldregs) { }
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* CONFIG_KEXEC */
+
+#endif /* _ARM_KEXEC_H */
diff --git a/include/asm-arm/pgtable.h b/include/asm-arm/pgtable.h
index b8cf2d5..7b2bafc 100644
--- a/include/asm-arm/pgtable.h
+++ b/include/asm-arm/pgtable.h
@@ -175,19 +175,29 @@
#ifndef __ASSEMBLY__
/*
- * The following macros handle the cache and bufferable bits...
+ * The pgprot_* and protection_map entries will be fixed up in runtime
+ * to include the cachable and bufferable bits based on memory policy,
+ * as well as any architecture dependent bits like global/ASID and SMP
+ * shared mapping bits.
*/
#define _L_PTE_DEFAULT L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_CACHEABLE | L_PTE_BUFFERABLE
#define _L_PTE_READ L_PTE_USER | L_PTE_EXEC
+extern pgprot_t pgprot_user;
extern pgprot_t pgprot_kernel;
-#define PAGE_NONE __pgprot(_L_PTE_DEFAULT)
-#define PAGE_COPY __pgprot(_L_PTE_DEFAULT | _L_PTE_READ)
-#define PAGE_SHARED __pgprot(_L_PTE_DEFAULT | _L_PTE_READ | L_PTE_WRITE)
-#define PAGE_READONLY __pgprot(_L_PTE_DEFAULT | _L_PTE_READ)
+#define PAGE_NONE pgprot_user
+#define PAGE_COPY __pgprot(pgprot_val(pgprot_user) | _L_PTE_READ)
+#define PAGE_SHARED __pgprot(pgprot_val(pgprot_user) | _L_PTE_READ | \
+ L_PTE_WRITE)
+#define PAGE_READONLY __pgprot(pgprot_val(pgprot_user) | _L_PTE_READ)
#define PAGE_KERNEL pgprot_kernel
+#define __PAGE_NONE __pgprot(_L_PTE_DEFAULT)
+#define __PAGE_COPY __pgprot(_L_PTE_DEFAULT | _L_PTE_READ)
+#define __PAGE_SHARED __pgprot(_L_PTE_DEFAULT | _L_PTE_READ | L_PTE_WRITE)
+#define __PAGE_READONLY __pgprot(_L_PTE_DEFAULT | _L_PTE_READ)
+
#endif /* __ASSEMBLY__ */
/*
@@ -198,23 +208,23 @@
* 2) If we could do execute protection, then read is implied
* 3) write implies read permissions
*/
-#define __P000 PAGE_NONE
-#define __P001 PAGE_READONLY
-#define __P010 PAGE_COPY
-#define __P011 PAGE_COPY
-#define __P100 PAGE_READONLY
-#define __P101 PAGE_READONLY
-#define __P110 PAGE_COPY
-#define __P111 PAGE_COPY
+#define __P000 __PAGE_NONE
+#define __P001 __PAGE_READONLY
+#define __P010 __PAGE_COPY
+#define __P011 __PAGE_COPY
+#define __P100 __PAGE_READONLY
+#define __P101 __PAGE_READONLY
+#define __P110 __PAGE_COPY
+#define __P111 __PAGE_COPY
-#define __S000 PAGE_NONE
-#define __S001 PAGE_READONLY
-#define __S010 PAGE_SHARED
-#define __S011 PAGE_SHARED
-#define __S100 PAGE_READONLY
-#define __S101 PAGE_READONLY
-#define __S110 PAGE_SHARED
-#define __S111 PAGE_SHARED
+#define __S000 __PAGE_NONE
+#define __S001 __PAGE_READONLY
+#define __S010 __PAGE_SHARED
+#define __S011 __PAGE_SHARED
+#define __S100 __PAGE_READONLY
+#define __S101 __PAGE_READONLY
+#define __S110 __PAGE_SHARED
+#define __S111 __PAGE_SHARED
#ifndef __ASSEMBLY__
/*
diff --git a/arch/arm/mach-s3c2410/clock.h b/include/asm-arm/plat-s3c24xx/clock.h
similarity index 96%
rename from arch/arm/mach-s3c2410/clock.h
rename to include/asm-arm/plat-s3c24xx/clock.h
index 7f0ea03..f6135db 100644
--- a/arch/arm/mach-s3c2410/clock.h
+++ b/include/asm-arm/plat-s3c24xx/clock.h
@@ -1,4 +1,4 @@
-/*
+/* linux/include/asm-arm/plat-s3c24xx/clock.h
* linux/arch/arm/mach-s3c2410/clock.h
*
* Copyright (c) 2004-2005 Simtec Electronics
diff --git a/arch/arm/mach-s3c2410/common-smdk.h b/include/asm-arm/plat-s3c24xx/common-smdk.h
similarity index 88%
rename from arch/arm/mach-s3c2410/common-smdk.h
rename to include/asm-arm/plat-s3c24xx/common-smdk.h
index 0e3a3be..58d9094 100644
--- a/arch/arm/mach-s3c2410/common-smdk.h
+++ b/include/asm-arm/plat-s3c24xx/common-smdk.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c2410/common-smdk.h
+/* linux/include/asm-arm/plat-s3c24xx/common-smdk.h
*
* Copyright (c) 2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
diff --git a/arch/arm/mach-s3c2410/cpu.h b/include/asm-arm/plat-s3c24xx/cpu.h
similarity index 94%
rename from arch/arm/mach-s3c2410/cpu.h
rename to include/asm-arm/plat-s3c24xx/cpu.h
index be42e40..15dd188 100644
--- a/arch/arm/mach-s3c2410/cpu.h
+++ b/include/asm-arm/plat-s3c24xx/cpu.h
@@ -1,4 +1,4 @@
-/* arch/arm/mach-s3c2410/cpu.h
+/* linux/include/asm-arm/plat-s3c24xx/cpu.h
*
* Copyright (c) 2004-2005 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
@@ -67,3 +67,4 @@
extern struct sysdev_class s3c2412_sysclass;
extern struct sysdev_class s3c2440_sysclass;
extern struct sysdev_class s3c2442_sysclass;
+extern struct sysdev_class s3c2443_sysclass;
diff --git a/arch/arm/mach-s3c2410/devs.h b/include/asm-arm/plat-s3c24xx/devs.h
similarity index 96%
rename from arch/arm/mach-s3c2410/devs.h
rename to include/asm-arm/plat-s3c24xx/devs.h
index 14fb0ba..dddf485 100644
--- a/arch/arm/mach-s3c2410/devs.h
+++ b/include/asm-arm/plat-s3c24xx/devs.h
@@ -1,4 +1,4 @@
-/* arch/arm/mach-s3c2410/devs.h
+/* linux/include/asm-arm/plat-s3c24xx/devs.h
*
* Copyright (c) 2004 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
diff --git a/include/asm-arm/plat-s3c24xx/dma.h b/include/asm-arm/plat-s3c24xx/dma.h
new file mode 100644
index 0000000..2c59406
--- /dev/null
+++ b/include/asm-arm/plat-s3c24xx/dma.h
@@ -0,0 +1,77 @@
+/* linux/include/asm-arm/plat-s3c24xx/dma.h
+ *
+ * Copyright (C) 2006 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Samsung S3C24XX DMA support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+extern struct sysdev_class dma_sysclass;
+extern struct s3c2410_dma_chan s3c2410_chans[S3C2410_DMA_CHANNELS];
+
+#define DMA_CH_VALID (1<<31)
+#define DMA_CH_NEVER (1<<30)
+
+struct s3c24xx_dma_addr {
+ unsigned long from;
+ unsigned long to;
+};
+
+/* struct s3c24xx_dma_map
+ *
+ * this holds the mapping information for the channel selected
+ * to be connected to the specified device
+*/
+
+struct s3c24xx_dma_map {
+ const char *name;
+ struct s3c24xx_dma_addr hw_addr;
+
+ unsigned long channels[S3C2410_DMA_CHANNELS];
+};
+
+struct s3c24xx_dma_selection {
+ struct s3c24xx_dma_map *map;
+ unsigned long map_size;
+ unsigned long dcon_mask;
+
+ void (*select)(struct s3c2410_dma_chan *chan,
+ struct s3c24xx_dma_map *map);
+};
+
+extern int s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel);
+
+/* struct s3c24xx_dma_order_ch
+ *
+ * channel map for one of the `enum dma_ch` dma channels. the list
+ * entry contains a set of low-level channel numbers, orred with
+ * DMA_CH_VALID, which are checked in the order in the array.
+*/
+
+struct s3c24xx_dma_order_ch {
+ unsigned int list[S3C2410_DMA_CHANNELS]; /* list of channels */
+ unsigned int flags; /* flags */
+};
+
+/* struct s3c24xx_dma_order
+ *
+ * information provided by either the core or the board to give the
+ * dma system a hint on how to allocate channels
+*/
+
+struct s3c24xx_dma_order {
+ struct s3c24xx_dma_order_ch channels[DMACH_MAX];
+};
+
+extern int s3c24xx_dma_order_set(struct s3c24xx_dma_order *map);
+
+/* DMA init code, called from the cpu support code */
+
+extern int s3c2410_dma_init(void);
+
+extern int s3c24xx_dma_init(unsigned int channels, unsigned int irq,
+ unsigned int stride);
diff --git a/arch/arm/mach-s3c2410/irq.h b/include/asm-arm/plat-s3c24xx/irq.h
similarity index 97%
rename from arch/arm/mach-s3c2410/irq.h
rename to include/asm-arm/plat-s3c24xx/irq.h
index e5913da..8af6d95 100644
--- a/arch/arm/mach-s3c2410/irq.h
+++ b/include/asm-arm/plat-s3c24xx/irq.h
@@ -1,4 +1,4 @@
-/* arch/arm/mach-s3c2410/irq.h
+/* linux/include/asm-arm/plat-s3c24xx/irq.h
*
* Copyright (c) 2004-2005 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
diff --git a/arch/arm/mach-s3c2410/pm.h b/include/asm-arm/plat-s3c24xx/pm.h
similarity index 96%
rename from arch/arm/mach-s3c2410/pm.h
rename to include/asm-arm/plat-s3c24xx/pm.h
index ffe197a..cc62366 100644
--- a/arch/arm/mach-s3c2410/pm.h
+++ b/include/asm-arm/plat-s3c24xx/pm.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c2410/pm.h
+/* linux/include/asm-arm/plat-s3c24xx/pm.h
*
* Copyright (c) 2004 Simtec Electronics
* Written by Ben Dooks, <ben@simtec.co.uk>
diff --git a/arch/arm/mach-s3c2410/s3c2400.h b/include/asm-arm/plat-s3c24xx/s3c2400.h
similarity index 93%
rename from arch/arm/mach-s3c2410/s3c2400.h
rename to include/asm-arm/plat-s3c24xx/s3c2400.h
index 8b2394e..3a5a168 100644
--- a/arch/arm/mach-s3c2410/s3c2400.h
+++ b/include/asm-arm/plat-s3c24xx/s3c2400.h
@@ -1,4 +1,4 @@
-/* arch/arm/mach-s3c2410/s3c2400.h
+/* linux/include/asm-arm/plat-s3c24xx/s3c2400.h
*
* Copyright (c) 2004 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
diff --git a/arch/arm/mach-s3c2410/s3c2410.h b/include/asm-arm/plat-s3c24xx/s3c2410.h
similarity index 93%
rename from arch/arm/mach-s3c2410/s3c2410.h
rename to include/asm-arm/plat-s3c24xx/s3c2410.h
index fbed084..36de0b8 100644
--- a/arch/arm/mach-s3c2410/s3c2410.h
+++ b/include/asm-arm/plat-s3c24xx/s3c2410.h
@@ -1,4 +1,4 @@
-/* arch/arm/mach-s3c2410/s3c2410.h
+/* linux/include/asm-arm/plat-s3c24xx/s3c2410.h
*
* Copyright (c) 2004 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
diff --git a/arch/arm/mach-s3c2410/s3c2412.h b/include/asm-arm/plat-s3c24xx/s3c2412.h
similarity index 93%
rename from arch/arm/mach-s3c2410/s3c2412.h
rename to include/asm-arm/plat-s3c24xx/s3c2412.h
index c6e5603..3ec9768 100644
--- a/arch/arm/mach-s3c2410/s3c2412.h
+++ b/include/asm-arm/plat-s3c24xx/s3c2412.h
@@ -1,4 +1,4 @@
-/* arch/arm/mach-s3c2410/s3c2412.h
+/* linux/include/asm-arm/plat-s3c24xx/s3c2412.h
*
* Copyright (c) 2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
diff --git a/arch/arm/mach-s3c2410/s3c2440.h b/include/asm-arm/plat-s3c24xx/s3c2440.h
similarity index 89%
rename from arch/arm/mach-s3c2410/s3c2440.h
rename to include/asm-arm/plat-s3c24xx/s3c2440.h
index dcd3160..107853b 100644
--- a/arch/arm/mach-s3c2410/s3c2440.h
+++ b/include/asm-arm/plat-s3c24xx/s3c2440.h
@@ -1,4 +1,4 @@
-/* arch/arm/mach-s3c2410/s3c2440.h
+/* linux/include/asm-arm/plat-s3c24xx/s3c2440.h
*
* Copyright (c) 2004-2005 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
diff --git a/arch/arm/mach-s3c2410/s3c2442.h b/include/asm-arm/plat-s3c24xx/s3c2442.h
similarity index 89%
rename from arch/arm/mach-s3c2410/s3c2442.h
rename to include/asm-arm/plat-s3c24xx/s3c2442.h
index 0ae37d2..451a23a 100644
--- a/arch/arm/mach-s3c2410/s3c2442.h
+++ b/include/asm-arm/plat-s3c24xx/s3c2442.h
@@ -1,4 +1,4 @@
-/* arch/arm/mach-s3c2410/s3c2442.h
+/* linux/include/asm-arm/plat-s3c24xx/s3c2442.h
*
* Copyright (c) 2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
diff --git a/include/asm-arm/plat-s3c24xx/s3c2443.h b/include/asm-arm/plat-s3c24xx/s3c2443.h
new file mode 100644
index 0000000..11d83b5
--- /dev/null
+++ b/include/asm-arm/plat-s3c24xx/s3c2443.h
@@ -0,0 +1,32 @@
+/* linux/include/asm-arm/plat-s3c24xx/s3c2443.h
+ *
+ * Copyright (c) 2004-2005 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for s3c2443 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifdef CONFIG_CPU_S3C2443
+
+struct s3c2410_uartcfg;
+
+extern int s3c2443_init(void);
+
+extern void s3c2443_map_io(struct map_desc *mach_desc, int size);
+
+extern void s3c2443_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+
+extern void s3c2443_init_clocks(int xtal);
+
+extern int s3c2443_baseclk_add(void);
+
+#else
+#define s3c2443_init_clocks NULL
+#define s3c2443_init_uarts NULL
+#define s3c2443_map_io NULL
+#define s3c2443_init NULL
+#endif
diff --git a/include/asm-arm/system.h b/include/asm-arm/system.h
index aa223fc..f438690 100644
--- a/include/asm-arm/system.h
+++ b/include/asm-arm/system.h
@@ -140,6 +140,40 @@
#define cpu_is_xscale() 1
#endif
+#define UDBG_UNDEFINED (1 << 0)
+#define UDBG_SYSCALL (1 << 1)
+#define UDBG_BADABORT (1 << 2)
+#define UDBG_SEGV (1 << 3)
+#define UDBG_BUS (1 << 4)
+
+extern unsigned int user_debug;
+
+#if __LINUX_ARM_ARCH__ >= 4
+#define vectors_high() (cr_alignment & CR_V)
+#else
+#define vectors_high() (0)
+#endif
+
+#if __LINUX_ARM_ARCH__ >= 6
+#define isb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c5, 4" \
+ : : "r" (0) : "memory")
+#define dsb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 4" \
+ : : "r" (0) : "memory")
+#define dmb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 5" \
+ : : "r" (0) : "memory")
+#else
+#define isb() __asm__ __volatile__ ("" : : : "memory")
+#define dsb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 4" \
+ : : "r" (0) : "memory")
+#define dmb() __asm__ __volatile__ ("" : : : "memory")
+#endif
+#define mb() dmb()
+#define rmb() mb()
+#define wmb() mb()
+#define read_barrier_depends() do { } while(0)
+#define set_mb(var, value) do { var = value; mb(); } while (0)
+#define nop() __asm__ __volatile__("mov\tr0,r0\t@ nop\n\t");
+
extern unsigned long cr_no_alignment; /* defined in entry-armv.S */
extern unsigned long cr_alignment; /* defined in entry-armv.S */
@@ -154,6 +188,7 @@
{
asm volatile("mcr p15, 0, %0, c1, c0, 0 @ set CR"
: : "r" (val) : "cc");
+ isb();
}
#ifndef CONFIG_SMP
@@ -176,34 +211,9 @@
{
asm volatile("mcr p15, 0, %0, c1, c0, 2 @ set copro access"
: : "r" (val) : "cc");
+ isb();
}
-#define UDBG_UNDEFINED (1 << 0)
-#define UDBG_SYSCALL (1 << 1)
-#define UDBG_BADABORT (1 << 2)
-#define UDBG_SEGV (1 << 3)
-#define UDBG_BUS (1 << 4)
-
-extern unsigned int user_debug;
-
-#if __LINUX_ARM_ARCH__ >= 4
-#define vectors_high() (cr_alignment & CR_V)
-#else
-#define vectors_high() (0)
-#endif
-
-#if __LINUX_ARM_ARCH__ >= 6
-#define mb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 5" \
- : : "r" (0) : "memory")
-#else
-#define mb() __asm__ __volatile__ ("" : : : "memory")
-#endif
-#define rmb() mb()
-#define wmb() mb()
-#define read_barrier_depends() do { } while(0)
-#define set_mb(var, value) do { var = value; mb(); } while (0)
-#define nop() __asm__ __volatile__("mov\tr0,r0\t@ nop\n\t");
-
/*
* switch_mm() may do a full cache flush over the context switch,
* so enable interrupts over the context switch to avoid high
diff --git a/include/asm-arm/tlbflush.h b/include/asm-arm/tlbflush.h
index cd10a0b..08c6991 100644
--- a/include/asm-arm/tlbflush.h
+++ b/include/asm-arm/tlbflush.h
@@ -247,7 +247,7 @@
const unsigned int __tlb_flag = __cpu_tlb_flags;
if (tlb_flag(TLB_WB))
- asm("mcr p15, 0, %0, c7, c10, 4" : : "r" (zero) : "cc");
+ dsb();
if (tlb_flag(TLB_V3_FULL))
asm("mcr p15, 0, %0, c6, c0, 0" : : "r" (zero) : "cc");
@@ -257,6 +257,15 @@
asm("mcr p15, 0, %0, c8, c6, 0" : : "r" (zero) : "cc");
if (tlb_flag(TLB_V4_I_FULL | TLB_V6_I_FULL))
asm("mcr p15, 0, %0, c8, c5, 0" : : "r" (zero) : "cc");
+
+ if (tlb_flag(TLB_V6_I_FULL | TLB_V6_D_FULL |
+ TLB_V6_I_PAGE | TLB_V6_D_PAGE |
+ TLB_V6_I_ASID | TLB_V6_D_ASID)) {
+ /* flush the branch target cache */
+ asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc");
+ dsb();
+ isb();
+ }
}
static inline void local_flush_tlb_mm(struct mm_struct *mm)
@@ -266,7 +275,7 @@
const unsigned int __tlb_flag = __cpu_tlb_flags;
if (tlb_flag(TLB_WB))
- asm("mcr p15, 0, %0, c7, c10, 4" : : "r" (zero) : "cc");
+ dsb();
if (cpu_isset(smp_processor_id(), mm->cpu_vm_mask)) {
if (tlb_flag(TLB_V3_FULL))
@@ -285,6 +294,14 @@
asm("mcr p15, 0, %0, c8, c6, 2" : : "r" (asid) : "cc");
if (tlb_flag(TLB_V6_I_ASID))
asm("mcr p15, 0, %0, c8, c5, 2" : : "r" (asid) : "cc");
+
+ if (tlb_flag(TLB_V6_I_FULL | TLB_V6_D_FULL |
+ TLB_V6_I_PAGE | TLB_V6_D_PAGE |
+ TLB_V6_I_ASID | TLB_V6_D_ASID)) {
+ /* flush the branch target cache */
+ asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc");
+ dsb();
+ }
}
static inline void
@@ -296,7 +313,7 @@
uaddr = (uaddr & PAGE_MASK) | ASID(vma->vm_mm);
if (tlb_flag(TLB_WB))
- asm("mcr p15, 0, %0, c7, c10, 4" : : "r" (zero));
+ dsb();
if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask)) {
if (tlb_flag(TLB_V3_PAGE))
@@ -317,6 +334,14 @@
asm("mcr p15, 0, %0, c8, c6, 1" : : "r" (uaddr) : "cc");
if (tlb_flag(TLB_V6_I_PAGE))
asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (uaddr) : "cc");
+
+ if (tlb_flag(TLB_V6_I_FULL | TLB_V6_D_FULL |
+ TLB_V6_I_PAGE | TLB_V6_D_PAGE |
+ TLB_V6_I_ASID | TLB_V6_D_ASID)) {
+ /* flush the branch target cache */
+ asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc");
+ dsb();
+ }
}
static inline void local_flush_tlb_kernel_page(unsigned long kaddr)
@@ -327,7 +352,7 @@
kaddr &= PAGE_MASK;
if (tlb_flag(TLB_WB))
- asm("mcr p15, 0, %0, c7, c10, 4" : : "r" (zero) : "cc");
+ dsb();
if (tlb_flag(TLB_V3_PAGE))
asm("mcr p15, 0, %0, c6, c0, 0" : : "r" (kaddr) : "cc");
@@ -347,11 +372,14 @@
if (tlb_flag(TLB_V6_I_PAGE))
asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (kaddr) : "cc");
- /* The ARM ARM states that the completion of a TLB maintenance
- * operation is only guaranteed by a DSB instruction
- */
- if (tlb_flag(TLB_V6_U_PAGE | TLB_V6_D_PAGE | TLB_V6_I_PAGE))
- asm("mcr p15, 0, %0, c7, c10, 4" : : "r" (zero) : "cc");
+ if (tlb_flag(TLB_V6_I_FULL | TLB_V6_D_FULL |
+ TLB_V6_I_PAGE | TLB_V6_D_PAGE |
+ TLB_V6_I_ASID | TLB_V6_D_ASID)) {
+ /* flush the branch target cache */
+ asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc");
+ dsb();
+ isb();
+ }
}
/*
@@ -369,15 +397,13 @@
*/
static inline void flush_pmd_entry(pmd_t *pmd)
{
- const unsigned int zero = 0;
const unsigned int __tlb_flag = __cpu_tlb_flags;
if (tlb_flag(TLB_DCLEAN))
asm("mcr p15, 0, %0, c7, c10, 1 @ flush_pmd"
: : "r" (pmd) : "cc");
if (tlb_flag(TLB_WB))
- asm("mcr p15, 0, %0, c7, c10, 4 @ flush_pmd"
- : : "r" (zero) : "cc");
+ dsb();
}
static inline void clean_pmd_entry(pmd_t *pmd)
diff --git a/include/asm-arm/unistd.h b/include/asm-arm/unistd.h
index 97e7060..0991b7b 100644
--- a/include/asm-arm/unistd.h
+++ b/include/asm-arm/unistd.h
@@ -372,6 +372,7 @@
#define __NR_move_pages (__NR_SYSCALL_BASE+344)
#define __NR_getcpu (__NR_SYSCALL_BASE+345)
/* 346 for epoll_pwait */
+#define __NR_sys_kexec_load (__NR_SYSCALL_BASE+347)
/*
* The following SWIs are ARM private.
diff --git a/include/asm-avr32/arch-at32ap/at91_pdc.h b/include/asm-avr32/arch-at32ap/at91_pdc.h
deleted file mode 100644
index 79d6e02..0000000
--- a/include/asm-avr32/arch-at32ap/at91_pdc.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/at91_pdc.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Peripheral Data Controller (PDC) registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_PDC_H
-#define AT91_PDC_H
-
-#define AT91_PDC_RPR 0x100 /* Receive Pointer Register */
-#define AT91_PDC_RCR 0x104 /* Receive Counter Register */
-#define AT91_PDC_TPR 0x108 /* Transmit Pointer Register */
-#define AT91_PDC_TCR 0x10c /* Transmit Counter Register */
-#define AT91_PDC_RNPR 0x110 /* Receive Next Pointer Register */
-#define AT91_PDC_RNCR 0x114 /* Receive Next Counter Register */
-#define AT91_PDC_TNPR 0x118 /* Transmit Next Pointer Register */
-#define AT91_PDC_TNCR 0x11c /* Transmit Next Counter Register */
-
-#define AT91_PDC_PTCR 0x120 /* Transfer Control Register */
-#define AT91_PDC_RXTEN (1 << 0) /* Receiver Transfer Enable */
-#define AT91_PDC_RXTDIS (1 << 1) /* Receiver Transfer Disable */
-#define AT91_PDC_TXTEN (1 << 8) /* Transmitter Transfer Enable */
-#define AT91_PDC_TXTDIS (1 << 9) /* Transmitter Transfer Disable */
-
-#define AT91_PDC_PTSR 0x124 /* Transfer Status Register */
-
-#endif
diff --git a/include/asm-i386/acpi.h b/include/asm-i386/acpi.h
index 5e657eb..449f3f2 100644
--- a/include/asm-i386/acpi.h
+++ b/include/asm-i386/acpi.h
@@ -127,6 +127,7 @@
#define acpi_ioapic 0
static inline void acpi_noirq_set(void) { }
static inline void acpi_disable_pci(void) { }
+static inline void disable_acpi(void) { }
#endif /* !CONFIG_ACPI */
diff --git a/include/asm-powerpc/atomic.h b/include/asm-powerpc/atomic.h
index f038e33..2ce4b6b 100644
--- a/include/asm-powerpc/atomic.h
+++ b/include/asm-powerpc/atomic.h
@@ -165,7 +165,8 @@
return t;
}
-#define atomic_cmpxchg(v, o, n) ((int)cmpxchg(&((v)->counter), (o), (n)))
+#define atomic_cmpxchg(v, o, n) \
+ ((__typeof__((v)->counter))cmpxchg(&((v)->counter), (o), (n)))
#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
/**
@@ -413,6 +414,43 @@
return t;
}
+#define atomic64_cmpxchg(v, o, n) \
+ ((__typeof__((v)->counter))cmpxchg(&((v)->counter), (o), (n)))
+#define atomic64_xchg(v, new) (xchg(&((v)->counter), new))
+
+/**
+ * atomic64_add_unless - add unless the number is a given value
+ * @v: pointer of type atomic64_t
+ * @a: the amount to add to v...
+ * @u: ...unless v is equal to u.
+ *
+ * Atomically adds @a to @v, so long as it was not @u.
+ * Returns non-zero if @v was not @u, and zero otherwise.
+ */
+static __inline__ int atomic64_add_unless(atomic64_t *v, long a, long u)
+{
+ long t;
+
+ __asm__ __volatile__ (
+ LWSYNC_ON_SMP
+"1: ldarx %0,0,%1 # atomic_add_unless\n\
+ cmpd 0,%0,%3 \n\
+ beq- 2f \n\
+ add %0,%2,%0 \n"
+" stdcx. %0,0,%1 \n\
+ bne- 1b \n"
+ ISYNC_ON_SMP
+" subf %0,%2,%0 \n\
+2:"
+ : "=&r" (t)
+ : "r" (&v->counter), "r" (a), "r" (u)
+ : "cc", "memory");
+
+ return t != u;
+}
+
+#define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0)
+
#endif /* __powerpc64__ */
#include <asm-generic/atomic.h>
diff --git a/include/asm-powerpc/dcr-native.h b/include/asm-powerpc/dcr-native.h
index d7a1bc1..05af081 100644
--- a/include/asm-powerpc/dcr-native.h
+++ b/include/asm-powerpc/dcr-native.h
@@ -26,8 +26,8 @@
#define DCR_MAP_OK(host) (1)
-#define dcr_map(dev, dcr_n, dcr_c) {}
-#define dcr_unmap(host, dcr_n, dcr_c) {}
+#define dcr_map(dev, dcr_n, dcr_c) ((dcr_host_t){})
+#define dcr_unmap(host, dcr_n, dcr_c) do {} while (0)
#define dcr_read(host, dcr_n) mfdcr(dcr_n)
#define dcr_write(host, dcr_n, value) mtdcr(dcr_n, value)
diff --git a/include/asm-powerpc/pmi.h b/include/asm-powerpc/pmi.h
new file mode 100644
index 0000000..cb0f8aa
--- /dev/null
+++ b/include/asm-powerpc/pmi.h
@@ -0,0 +1,67 @@
+#ifndef _POWERPC_PMI_H
+#define _POWERPC_PMI_H
+
+/*
+ * Definitions for talking with PMI device on PowerPC
+ *
+ * PMI (Platform Management Interrupt) is a way to communicate
+ * with the BMC (Baseboard Management Controller) via interrupts.
+ * Unlike IPMI it is bidirectional and has a low latency.
+ *
+ * (C) Copyright IBM Deutschland Entwicklung GmbH 2005
+ *
+ * Author: Christian Krafft <krafft@de.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifdef __KERNEL__
+
+#include <asm/of_device.h>
+
+#define PMI_TYPE_FREQ_CHANGE 0x01
+#define PMI_READ_TYPE 0
+#define PMI_READ_DATA0 1
+#define PMI_READ_DATA1 2
+#define PMI_READ_DATA2 3
+#define PMI_WRITE_TYPE 4
+#define PMI_WRITE_DATA0 5
+#define PMI_WRITE_DATA1 6
+#define PMI_WRITE_DATA2 7
+
+#define PMI_ACK 0x80
+
+#define PMI_TIMEOUT 100
+
+typedef struct {
+ u8 type;
+ u8 data0;
+ u8 data1;
+ u8 data2;
+} pmi_message_t;
+
+struct pmi_handler {
+ struct list_head node;
+ u8 type;
+ void (*handle_pmi_message) (struct of_device *, pmi_message_t);
+};
+
+void pmi_register_handler(struct of_device *, struct pmi_handler *);
+void pmi_unregister_handler(struct of_device *, struct pmi_handler *);
+
+void pmi_send_message(struct of_device *, pmi_message_t);
+
+#endif /* __KERNEL__ */
+#endif /* _POWERPC_PMI_H */
diff --git a/include/asm-powerpc/prom.h b/include/asm-powerpc/prom.h
index 0afee17..020ed01 100644
--- a/include/asm-powerpc/prom.h
+++ b/include/asm-powerpc/prom.h
@@ -255,6 +255,8 @@
/* CPU OF node matching */
struct device_node *of_get_cpu_node(int cpu, unsigned int *thread);
+/* Get the MAC address */
+extern const void *of_get_mac_address(struct device_node *np);
/*
* OF interrupt mapping
diff --git a/include/asm-powerpc/ps3.h b/include/asm-powerpc/ps3.h
index e5982ad..821581a 100644
--- a/include/asm-powerpc/ps3.h
+++ b/include/asm-powerpc/ps3.h
@@ -355,13 +355,7 @@
/* vuart routines */
-struct ps3_vuart_stats {
- unsigned long bytes_written;
- unsigned long bytes_read;
- unsigned long tx_interrupts;
- unsigned long rx_interrupts;
- unsigned long disconnect_interrupts;
-};
+struct ps3_vuart_port_priv;
/**
* struct ps3_vuart_port_device - a device on a vuart port
@@ -370,24 +364,17 @@
struct ps3_vuart_port_device {
enum ps3_match_id match_id;
struct device core;
+ struct ps3_vuart_port_priv* priv; /* private driver variables */
- /* private driver variables */
- unsigned int port_number;
- u64 interrupt_mask;
- struct {
- spinlock_t lock;
- struct list_head head;
- } tx_list;
- struct {
- unsigned long bytes_held;
- spinlock_t lock;
- struct list_head head;
- } rx_list;
- struct ps3_vuart_stats stats;
};
int ps3_vuart_port_device_register(struct ps3_vuart_port_device *dev);
+/* system manager */
+
+void ps3_sys_manager_restart(void);
+void ps3_sys_manager_power_off(void);
+
struct ps3_prealloc {
const char *name;
void *address;
diff --git a/include/asm-powerpc/ucc_slow.h b/include/asm-powerpc/ucc_slow.h
index 1babad9..fdaac9d 100644
--- a/include/asm-powerpc/ucc_slow.h
+++ b/include/asm-powerpc/ucc_slow.h
@@ -150,7 +150,7 @@
int ucc_num;
enum qe_clock rx_clock;
enum qe_clock tx_clock;
- struct ucc_slow *regs;
+ u32 regs;
int irq;
u16 uccm_mask;
int data_mem_part;
@@ -199,9 +199,9 @@
and length for first BD in a frame */
u32 tx_base_offset; /* first BD in Tx BD table offset (In MURAM) */
u32 rx_base_offset; /* first BD in Rx BD table offset (In MURAM) */
- u8 *confBd; /* next BD for confirm after Tx */
- u8 *tx_bd; /* next BD for new Tx request */
- u8 *rx_bd; /* next BD to collect after Rx */
+ struct qe_bd *confBd; /* next BD for confirm after Tx */
+ struct qe_bd *tx_bd; /* next BD for new Tx request */
+ struct qe_bd *rx_bd; /* next BD to collect after Rx */
void *p_rx_frame; /* accumulating receive frame */
u16 *p_ucce; /* a pointer to the event register in memory.
*/
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index 815f1fb..8bcfaa4 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -75,7 +75,7 @@
typedef int (*acpi_table_handler) (struct acpi_table_header *table);
-typedef int (*acpi_madt_entry_handler) (struct acpi_subtable_header *header, const unsigned long end);
+typedef int (*acpi_table_entry_handler) (struct acpi_subtable_header *header, const unsigned long end);
char * __acpi_map_table (unsigned long phys_addr, unsigned long size);
unsigned long acpi_find_rsdp (void);
@@ -85,8 +85,10 @@
int acpi_table_init (void);
int acpi_table_parse (char *id, acpi_table_handler handler);
-int acpi_table_parse_madt (enum acpi_madt_type id, acpi_madt_entry_handler handler, unsigned int max_entries);
-int acpi_table_parse_srat (enum acpi_srat_type id, acpi_madt_entry_handler handler, unsigned int max_entries);
+int __init acpi_table_parse_entries(char *id, unsigned long table_size,
+ int entry_id, acpi_table_entry_handler handler, unsigned int max_entries);
+int acpi_table_parse_madt (enum acpi_madt_type id, acpi_table_entry_handler handler, unsigned int max_entries);
+int acpi_table_parse_srat (enum acpi_srat_type id, acpi_table_entry_handler handler, unsigned int max_entries);
int acpi_parse_mcfg (struct acpi_table_header *header);
void acpi_table_print_madt_entry (struct acpi_subtable_header *madt);
void acpi_table_print_srat_entry (struct acpi_subtable_header *srat);
diff --git a/include/linux/atmel_pdc.h b/include/linux/atmel_pdc.h
new file mode 100644
index 0000000..5058a31
--- /dev/null
+++ b/include/linux/atmel_pdc.h
@@ -0,0 +1,36 @@
+/*
+ * include/linux/atmel_pdc.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Peripheral Data Controller (PDC) registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef ATMEL_PDC_H
+#define ATMEL_PDC_H
+
+#define ATMEL_PDC_RPR 0x100 /* Receive Pointer Register */
+#define ATMEL_PDC_RCR 0x104 /* Receive Counter Register */
+#define ATMEL_PDC_TPR 0x108 /* Transmit Pointer Register */
+#define ATMEL_PDC_TCR 0x10c /* Transmit Counter Register */
+#define ATMEL_PDC_RNPR 0x110 /* Receive Next Pointer Register */
+#define ATMEL_PDC_RNCR 0x114 /* Receive Next Counter Register */
+#define ATMEL_PDC_TNPR 0x118 /* Transmit Next Pointer Register */
+#define ATMEL_PDC_TNCR 0x11c /* Transmit Next Counter Register */
+
+#define ATMEL_PDC_PTCR 0x120 /* Transfer Control Register */
+#define ATMEL_PDC_RXTEN (1 << 0) /* Receiver Transfer Enable */
+#define ATMEL_PDC_RXTDIS (1 << 1) /* Receiver Transfer Disable */
+#define ATMEL_PDC_TXTEN (1 << 8) /* Transmitter Transfer Enable */
+#define ATMEL_PDC_TXTDIS (1 << 9) /* Transmitter Transfer Disable */
+
+#define ATMEL_PDC_PTSR 0x124 /* Transfer Status Register */
+
+#endif
diff --git a/include/linux/debugfs.h b/include/linux/debugfs.h
index 047567d..9fa0983 100644
--- a/include/linux/debugfs.h
+++ b/include/linux/debugfs.h
@@ -33,6 +33,9 @@
struct dentry *debugfs_create_dir(const char *name, struct dentry *parent);
+struct dentry *debugfs_create_symlink(const char *name, struct dentry *parent,
+ const char *dest);
+
void debugfs_remove(struct dentry *dentry);
struct dentry *debugfs_create_u8(const char *name, mode_t mode,
@@ -70,6 +73,13 @@
return ERR_PTR(-ENODEV);
}
+static inline struct dentry *debugfs_create_symlink(const char *name,
+ struct dentry *parent,
+ const char *dest)
+{
+ return ERR_PTR(-ENODEV);
+}
+
static inline void debugfs_remove(struct dentry *dentry)
{ }
diff --git a/include/linux/device.h b/include/linux/device.h
index 26e4692..d5b1b7b 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -2,6 +2,7 @@
* device.h - generic, centralized driver model
*
* Copyright (c) 2001-2003 Patrick Mochel <mochel@osdl.org>
+ * Copyright (c) 2004-2007 Greg Kroah-Hartman <gregkh@suse.de>
*
* This file is released under the GPLv2
*
diff --git a/include/linux/ide.h b/include/linux/ide.h
index 04e0fa9..79c0282 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -636,7 +636,6 @@
unsigned int bios_cyl; /* BIOS/fdisk/LILO number of cyls */
unsigned int cyl; /* "real" number of cyls */
unsigned int drive_data; /* use by tuneproc/selectproc */
- unsigned int usage; /* current "open()" count for drive */
unsigned int failures; /* current failure count */
unsigned int max_failures; /* maximum allowed failure count */
u64 probed_capacity;/* initial reported media capacity (ide-cd only currently) */
@@ -736,23 +735,22 @@
int (*ide_dma_end)(ide_drive_t *drive);
int (*ide_dma_check)(ide_drive_t *drive);
int (*ide_dma_on)(ide_drive_t *drive);
- int (*ide_dma_off_quietly)(ide_drive_t *drive);
+ void (*dma_off_quietly)(ide_drive_t *drive);
int (*ide_dma_test_irq)(ide_drive_t *drive);
- int (*ide_dma_host_on)(ide_drive_t *drive);
- int (*ide_dma_host_off)(ide_drive_t *drive);
+ void (*ide_dma_clear_irq)(ide_drive_t *drive);
+ void (*dma_host_on)(ide_drive_t *drive);
+ void (*dma_host_off)(ide_drive_t *drive);
int (*ide_dma_lostirq)(ide_drive_t *drive);
int (*ide_dma_timeout)(ide_drive_t *drive);
void (*OUTB)(u8 addr, unsigned long port);
void (*OUTBSYNC)(ide_drive_t *drive, u8 addr, unsigned long port);
void (*OUTW)(u16 addr, unsigned long port);
- void (*OUTL)(u32 addr, unsigned long port);
void (*OUTSW)(unsigned long port, void *addr, u32 count);
void (*OUTSL)(unsigned long port, void *addr, u32 count);
u8 (*INB)(unsigned long port);
u16 (*INW)(unsigned long port);
- u32 (*INL)(unsigned long port);
void (*INSW)(unsigned long port, void *addr, u32 count);
void (*INSL)(unsigned long port, void *addr, u32 count);
@@ -774,7 +772,6 @@
unsigned int cursg;
unsigned int cursg_ofs;
- int mmio; /* hosts iomio (0) or custom (2) select */
int rqsize; /* max sectors per request */
int irq; /* our irq number */
@@ -802,12 +799,11 @@
unsigned udma_four : 1; /* 1=ATA-66 capable, 0=default */
unsigned no_lba48 : 1; /* 1 = cannot do LBA48 */
unsigned no_lba48_dma : 1; /* 1 = cannot do LBA48 DMA */
- unsigned no_dsc : 1; /* 0 default, 1 dsc_overlap disabled */
unsigned auto_poll : 1; /* supports nop auto-poll */
unsigned sg_mapped : 1; /* sg_table and sg_nents are ready */
unsigned no_io_32bit : 1; /* 1 = can not do 32-bit IO ops */
unsigned err_stops_fifo : 1; /* 1=data FIFO is cleared by an error */
- unsigned atapi_irq_bogon : 1; /* Generates spurious DMA interrupts in PIO mode */
+ unsigned mmio : 1; /* host uses MMIO */
struct device gendev;
struct completion gendev_rel_comp; /* To deal with device release() */
@@ -1280,8 +1276,9 @@
int __ide_dma_bad_drive(ide_drive_t *);
int __ide_dma_good_drive(ide_drive_t *);
int ide_use_dma(ide_drive_t *);
-int __ide_dma_off(ide_drive_t *);
+void ide_dma_off(ide_drive_t *);
void ide_dma_verbose(ide_drive_t *);
+int ide_set_dma(ide_drive_t *);
ide_startstop_t ide_dma_intr(ide_drive_t *);
#ifdef CONFIG_BLK_DEV_IDEDMA_PCI
@@ -1291,9 +1288,9 @@
extern int ide_release_dma(ide_hwif_t *);
extern void ide_setup_dma(ide_hwif_t *, unsigned long, unsigned int);
-extern int __ide_dma_host_off(ide_drive_t *);
-extern int __ide_dma_off_quietly(ide_drive_t *);
-extern int __ide_dma_host_on(ide_drive_t *);
+void ide_dma_host_off(ide_drive_t *);
+void ide_dma_off_quietly(ide_drive_t *);
+void ide_dma_host_on(ide_drive_t *);
extern int __ide_dma_on(ide_drive_t *);
extern int __ide_dma_check(ide_drive_t *);
extern int ide_dma_setup(ide_drive_t *);
@@ -1305,8 +1302,9 @@
#else
static inline int ide_use_dma(ide_drive_t *drive) { return 0; }
-static inline int __ide_dma_off(ide_drive_t *drive) { return 0; }
+static inline void ide_dma_off(ide_drive_t *drive) { ; }
static inline void ide_dma_verbose(ide_drive_t *drive) { ; }
+static inline int ide_set_dma(ide_drive_t *drive) { return 1; }
#endif /* CONFIG_BLK_DEV_IDEDMA */
#ifndef CONFIG_BLK_DEV_IDEDMA_PCI
@@ -1354,6 +1352,7 @@
extern char *ide_xfer_verbose(u8 xfer_rate);
extern void ide_toggle_bounce(ide_drive_t *drive, int on);
extern int ide_set_xfer_rate(ide_drive_t *drive, u8 rate);
+int ide_use_fast_pio(ide_drive_t *);
u8 ide_dump_status(ide_drive_t *, const char *, u8);
@@ -1367,7 +1366,6 @@
u8 pio_mode;
u8 use_iordy;
u8 overridden;
- u8 blacklisted;
unsigned int cycle_time;
} ide_pio_data_t;
diff --git a/include/linux/kexec.h b/include/linux/kexec.h
index d02425c..696e5ec 100644
--- a/include/linux/kexec.h
+++ b/include/linux/kexec.h
@@ -125,6 +125,7 @@
#define KEXEC_ARCH_PPC (20 << 16)
#define KEXEC_ARCH_PPC64 (21 << 16)
#define KEXEC_ARCH_IA_64 (50 << 16)
+#define KEXEC_ARCH_ARM (40 << 16)
#define KEXEC_ARCH_S390 (22 << 16)
#define KEXEC_ARCH_SH (42 << 16)
#define KEXEC_ARCH_MIPS_LE (10 << 16)
diff --git a/include/linux/kmod.h b/include/linux/kmod.h
index 10f505c..cc8e674 100644
--- a/include/linux/kmod.h
+++ b/include/linux/kmod.h
@@ -28,8 +28,10 @@
#ifdef CONFIG_KMOD
/* modprobe exit status on success, -ve on error. Return value
* usually useless though. */
+extern void kmod_sysfs_init(void);
extern int request_module(const char * name, ...) __attribute__ ((format (printf, 1, 2)));
#else
+static inline void kmod_sysfs_init(void) {};
static inline int request_module(const char * name, ...) { return -ENOSYS; }
#endif
diff --git a/include/linux/module.h b/include/linux/module.h
index 419d3ef..95679eb 100644
--- a/include/linux/module.h
+++ b/include/linux/module.h
@@ -76,8 +76,6 @@
struct exception_table_entry *finish);
void sort_main_extable(void);
-extern struct subsystem module_subsys;
-
#ifdef MODULE
#define MODULE_GENERIC_TABLE(gtype,name) \
extern const struct gtype##_id __mod_##gtype##_table \
@@ -467,10 +465,6 @@
extern void print_modules(void);
-struct device_driver;
-void module_add_driver(struct module *, struct device_driver *);
-void module_remove_driver(struct device_driver *);
-
#else /* !CONFIG_MODULES... */
#define EXPORT_SYMBOL(sym)
#define EXPORT_SYMBOL_GPL(sym)
@@ -568,18 +562,59 @@
{
}
+#endif /* CONFIG_MODULES */
+
struct device_driver;
+#ifdef CONFIG_SYSFS
struct module;
-static inline void module_add_driver(struct module *module, struct device_driver *driver)
+extern struct subsystem module_subsys;
+
+int mod_sysfs_init(struct module *mod);
+int mod_sysfs_setup(struct module *mod,
+ struct kernel_param *kparam,
+ unsigned int num_params);
+int module_add_modinfo_attrs(struct module *mod);
+void module_remove_modinfo_attrs(struct module *mod);
+
+#else /* !CONFIG_SYSFS */
+
+static inline int mod_sysfs_init(struct module *mod)
{
+ return 0;
}
-static inline void module_remove_driver(struct device_driver *driver)
+static inline int mod_sysfs_setup(struct module *mod,
+ struct kernel_param *kparam,
+ unsigned int num_params)
{
+ return 0;
}
-#endif /* CONFIG_MODULES */
+static inline int module_add_modinfo_attrs(struct module *mod)
+{
+ return 0;
+}
+
+static inline void module_remove_modinfo_attrs(struct module *mod)
+{ }
+
+#endif /* CONFIG_SYSFS */
+
+#if defined(CONFIG_SYSFS) && defined(CONFIG_MODULES)
+
+void module_add_driver(struct module *mod, struct device_driver *drv);
+void module_remove_driver(struct device_driver *drv);
+
+#else /* not both CONFIG_SYSFS && CONFIG_MODULES */
+
+static inline void module_add_driver(struct module *mod, struct device_driver *drv)
+{ }
+
+static inline void module_remove_driver(struct device_driver *drv)
+{ }
+
+#endif
#define symbol_request(x) try_then_request_module(symbol_get(x), "symbol:" #x)
diff --git a/include/linux/moduleparam.h b/include/linux/moduleparam.h
index 4a189da..b26b2e5 100644
--- a/include/linux/moduleparam.h
+++ b/include/linux/moduleparam.h
@@ -169,10 +169,22 @@
struct module;
+#if defined(CONFIG_SYSFS) && defined(CONFIG_MODULES)
extern int module_param_sysfs_setup(struct module *mod,
struct kernel_param *kparam,
unsigned int num_params);
extern void module_param_sysfs_remove(struct module *mod);
+#else
+static inline int module_param_sysfs_setup(struct module *mod,
+ struct kernel_param *kparam,
+ unsigned int num_params)
+{
+ return 0;
+}
+
+static inline void module_param_sysfs_remove(struct module *mod)
+{ }
+#endif
#endif /* _LINUX_MODULE_PARAMS_H */
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 98c8765..2c4b684 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -854,5 +854,8 @@
#define PCIPCI_ALIMAGIK 32 /* Need low latency setting */
#define PCIAGP_FAIL 64 /* No PCI to AGP DMA */
+extern unsigned long pci_cardbus_io_size;
+extern unsigned long pci_cardbus_mem_size;
+
#endif /* __KERNEL__ */
#endif /* LINUX_PCI_H */
diff --git a/include/linux/usb.h b/include/linux/usb.h
index b5c226a..a8e8d1e 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -935,7 +935,7 @@
unsigned int offset;
unsigned int length; /* expected length */
unsigned int actual_length;
- unsigned int status;
+ int status;
};
struct urb;
diff --git a/include/linux/usb/cdc.h b/include/linux/usb/cdc.h
index ba617c3..956edf3 100644
--- a/include/linux/usb/cdc.h
+++ b/include/linux/usb/cdc.h
@@ -73,6 +73,13 @@
__u8 bmCapabilities;
} __attribute__ ((packed));
+/* capabilities from 5.2.3.3 */
+
+#define USB_CDC_COMM_FEATURE 0x01
+#define USB_CDC_CAP_LINE 0x02
+#define USB_CDC_CAP_BRK 0x04
+#define USB_CDC_CAP_NOTIFY 0x08
+
/* "Union Functional Descriptor" from CDC spec 5.2.3.8 */
struct usb_cdc_union_desc {
__u8 bLength;
diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h
index ae78337..245c725 100644
--- a/include/linux/usb/ch9.h
+++ b/include/linux/usb/ch9.h
@@ -367,7 +367,7 @@
/* bulk endpoints with 8 byte maxpacket */
__u8 bDebugInEndpoint;
__u8 bDebugOutEndpoint;
-};
+} __attribute__((packed));
/*-------------------------------------------------------------------------*/
@@ -396,7 +396,7 @@
__le16 wTotalLength;
__u8 bNumEncryptionTypes;
-};
+} __attribute__((packed));
/*-------------------------------------------------------------------------*/
@@ -410,7 +410,7 @@
__u8 tTKID[3];
__u8 bReserved;
__u8 bKeyData[0];
-};
+} __attribute__((packed));
/*-------------------------------------------------------------------------*/
@@ -426,7 +426,7 @@
#define USB_ENC_TYPE_RSA_1 3 /* rsa3072/sha1 auth */
__u8 bEncryptionValue; /* use in SET_ENCRYPTION */
__u8 bAuthKeyIndex;
-};
+} __attribute__((packed));
/*-------------------------------------------------------------------------*/
@@ -438,7 +438,7 @@
__le16 wTotalLength;
__u8 bNumDeviceCaps;
-};
+} __attribute__((packed));
/*-------------------------------------------------------------------------*/
@@ -447,7 +447,7 @@
__u8 bLength;
__u8 bDescriptorType;
__u8 bDevCapabilityType;
-};
+} __attribute__((packed));
#define USB_CAP_TYPE_WIRELESS_USB 1
@@ -475,7 +475,7 @@
__u8 bmFFITXPowerInfo; /* FFI power levels */
__le16 bmBandGroup;
__u8 bReserved;
-};
+} __attribute__((packed));
/*-------------------------------------------------------------------------*/
@@ -496,7 +496,7 @@
#define USB_ENDPOINT_SWITCH_NO 0
#define USB_ENDPOINT_SWITCH_SWITCH 1
#define USB_ENDPOINT_SWITCH_SCALE 2
-};
+} __attribute__((packed));
/*-------------------------------------------------------------------------*/
@@ -512,7 +512,7 @@
__u8 CDID[16];
__u8 nonce[16];
__u8 MIC[8];
-};
+} __attribute__((packed));
/*-------------------------------------------------------------------------*/
@@ -524,7 +524,7 @@
__u8 CHID[16]; /* persistent host id */
__u8 CDID[16]; /* device id (unique w/in host context) */
__u8 CK[16]; /* connection key */
-};
+} __attribute__((packed));
/*-------------------------------------------------------------------------*/
diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h
index 33dcd85..32acbae 100644
--- a/include/linux/usb/serial.h
+++ b/include/linux/usb/serial.h
@@ -54,6 +54,8 @@
* @write_wait: a wait_queue_head_t used by the port.
* @work: work queue entry for the line discipline waking up.
* @open_count: number of times this port has been opened.
+ * @throttled: nonzero if the read urb is inactive to throttle the device
+ * @throttle_req: nonzero if the tty wants to throttle us
*
* This structure is used by the usb-serial core and drivers for the specific
* ports of a device.
@@ -88,6 +90,8 @@
wait_queue_head_t write_wait;
struct work_struct work;
int open_count;
+ char throttled;
+ char throttle_req;
struct device dev;
};
#define to_usb_serial_port(d) container_of(d, struct usb_serial_port, dev)
@@ -269,6 +273,8 @@
extern int usb_serial_generic_chars_in_buffer (struct usb_serial_port *port);
extern void usb_serial_generic_read_bulk_callback (struct urb *urb);
extern void usb_serial_generic_write_bulk_callback (struct urb *urb);
+extern void usb_serial_generic_throttle (struct usb_serial_port *port);
+extern void usb_serial_generic_unthrottle (struct usb_serial_port *port);
extern void usb_serial_generic_shutdown (struct usb_serial *serial);
extern int usb_serial_generic_register (int debug);
extern void usb_serial_generic_deregister (void);
diff --git a/include/linux/usb_usual.h b/include/linux/usb_usual.h
index 2ae76fe..1b792b9 100644
--- a/include/linux/usb_usual.h
+++ b/include/linux/usb_usual.h
@@ -46,7 +46,9 @@
US_FLAG(MAX_SECTORS_64, 0x00000400) \
/* Sets max_sectors to 64 */ \
US_FLAG(IGNORE_DEVICE, 0x00000800) \
- /* Don't claim device */
+ /* Don't claim device */ \
+ US_FLAG(CAPACITY_HEURISTICS, 0x00001000) \
+ /* sometimes sizes is too big */
#define US_FLAG(name, value) US_FL_##name = value ,
enum { US_DO_ALL_FLAGS };
diff --git a/include/linux/usbdevice_fs.h b/include/linux/usbdevice_fs.h
index 617d8a1..342dd5a 100644
--- a/include/linux/usbdevice_fs.h
+++ b/include/linux/usbdevice_fs.h
@@ -159,9 +159,9 @@
#define USBDEVFS_SUBMITURB32 _IOR('U', 10, struct usbdevfs_urb32)
#define USBDEVFS_DISCARDURB _IO('U', 11)
#define USBDEVFS_REAPURB _IOW('U', 12, void *)
-#define USBDEVFS_REAPURB32 _IOW('U', 12, u32)
+#define USBDEVFS_REAPURB32 _IOW('U', 12, __u32)
#define USBDEVFS_REAPURBNDELAY _IOW('U', 13, void *)
-#define USBDEVFS_REAPURBNDELAY32 _IOW('U', 13, u32)
+#define USBDEVFS_REAPURBNDELAY32 _IOW('U', 13, __u32)
#define USBDEVFS_DISCSIGNAL _IOR('U', 14, struct usbdevfs_disconnectsignal)
#define USBDEVFS_CLAIMINTERFACE _IOR('U', 15, unsigned int)
#define USBDEVFS_RELEASEINTERFACE _IOR('U', 16, unsigned int)
diff --git a/include/pcmcia/ciscode.h b/include/pcmcia/ciscode.h
index c1da855..eae7e2e 100644
--- a/include/pcmcia/ciscode.h
+++ b/include/pcmcia/ciscode.h
@@ -95,6 +95,7 @@
#define PRODID_QUATECH_DUAL_RS232 0x0012
#define PRODID_QUATECH_DUAL_RS232_D1 0x0007
#define PRODID_QUATECH_DUAL_RS232_D2 0x0052
+#define PRODID_QUATECH_DUAL_RS232_G 0x004d
#define PRODID_QUATECH_QUAD_RS232 0x001b
#define PRODID_QUATECH_DUAL_RS422 0x000e
#define PRODID_QUATECH_QUAD_RS422 0x0045
diff --git a/include/rdma/ib_addr.h b/include/rdma/ib_addr.h
index c094e50..c36750f 100644
--- a/include/rdma/ib_addr.h
+++ b/include/rdma/ib_addr.h
@@ -110,6 +110,12 @@
dev_addr->broadcast[9] = (unsigned char) pkey;
}
+static inline void ib_addr_get_mgid(struct rdma_dev_addr *dev_addr,
+ union ib_gid *gid)
+{
+ memcpy(gid, dev_addr->broadcast + 4, sizeof *gid);
+}
+
static inline void ib_addr_get_sgid(struct rdma_dev_addr *dev_addr,
union ib_gid *gid)
{
diff --git a/include/rdma/ib_sa.h b/include/rdma/ib_sa.h
index 97715b0..5e26b2f 100644
--- a/include/rdma/ib_sa.h
+++ b/include/rdma/ib_sa.h
@@ -285,18 +285,6 @@
void *context,
struct ib_sa_query **query);
-int ib_sa_mcmember_rec_query(struct ib_sa_client *client,
- struct ib_device *device, u8 port_num,
- u8 method,
- struct ib_sa_mcmember_rec *rec,
- ib_sa_comp_mask comp_mask,
- int timeout_ms, gfp_t gfp_mask,
- void (*callback)(int status,
- struct ib_sa_mcmember_rec *resp,
- void *context),
- void *context,
- struct ib_sa_query **query);
-
int ib_sa_service_rec_query(struct ib_sa_client *client,
struct ib_device *device, u8 port_num,
u8 method,
@@ -309,93 +297,82 @@
void *context,
struct ib_sa_query **sa_query);
-/**
- * ib_sa_mcmember_rec_set - Start an MCMember set query
- * @client:SA client
- * @device:device to send query on
- * @port_num: port number to send query on
- * @rec:MCMember Record to send in query
- * @comp_mask:component mask to send in query
- * @timeout_ms:time to wait for response
- * @gfp_mask:GFP mask to use for internal allocations
- * @callback:function called when query completes, times out or is
- * canceled
- * @context:opaque user context passed to callback
- * @sa_query:query context, used to cancel query
- *
- * Send an MCMember Set query to the SA (eg to join a multicast
- * group). The callback function will be called when the query
- * completes (or fails); status is 0 for a successful response, -EINTR
- * if the query is canceled, -ETIMEDOUT is the query timed out, or
- * -EIO if an error occurred sending the query. The resp parameter of
- * the callback is only valid if status is 0.
- *
- * If the return value of ib_sa_mcmember_rec_set() is negative, it is
- * an error code. Otherwise it is a query ID that can be used to
- * cancel the query.
- */
-static inline int
-ib_sa_mcmember_rec_set(struct ib_sa_client *client,
- struct ib_device *device, u8 port_num,
- struct ib_sa_mcmember_rec *rec,
- ib_sa_comp_mask comp_mask,
- int timeout_ms, gfp_t gfp_mask,
- void (*callback)(int status,
- struct ib_sa_mcmember_rec *resp,
- void *context),
- void *context,
- struct ib_sa_query **query)
-{
- return ib_sa_mcmember_rec_query(client, device, port_num,
- IB_MGMT_METHOD_SET,
- rec, comp_mask,
- timeout_ms, gfp_mask, callback,
- context, query);
-}
+struct ib_sa_multicast {
+ struct ib_sa_mcmember_rec rec;
+ ib_sa_comp_mask comp_mask;
+ int (*callback)(int status,
+ struct ib_sa_multicast *multicast);
+ void *context;
+};
/**
- * ib_sa_mcmember_rec_delete - Start an MCMember delete query
- * @client:SA client
- * @device:device to send query on
- * @port_num: port number to send query on
- * @rec:MCMember Record to send in query
- * @comp_mask:component mask to send in query
- * @timeout_ms:time to wait for response
- * @gfp_mask:GFP mask to use for internal allocations
- * @callback:function called when query completes, times out or is
- * canceled
- * @context:opaque user context passed to callback
- * @sa_query:query context, used to cancel query
+ * ib_sa_join_multicast - Initiates a join request to the specified multicast
+ * group.
+ * @client: SA client
+ * @device: Device associated with the multicast group.
+ * @port_num: Port on the specified device to associate with the multicast
+ * group.
+ * @rec: SA multicast member record specifying group attributes.
+ * @comp_mask: Component mask indicating which group attributes of %rec are
+ * valid.
+ * @gfp_mask: GFP mask for memory allocations.
+ * @callback: User callback invoked once the join operation completes.
+ * @context: User specified context stored with the ib_sa_multicast structure.
*
- * Send an MCMember Delete query to the SA (eg to leave a multicast
- * group). The callback function will be called when the query
- * completes (or fails); status is 0 for a successful response, -EINTR
- * if the query is canceled, -ETIMEDOUT is the query timed out, or
- * -EIO if an error occurred sending the query. The resp parameter of
- * the callback is only valid if status is 0.
+ * This call initiates a multicast join request with the SA for the specified
+ * multicast group. If the join operation is started successfully, it returns
+ * an ib_sa_multicast structure that is used to track the multicast operation.
+ * Users must free this structure by calling ib_free_multicast, even if the
+ * join operation later fails. (The callback status is non-zero.)
*
- * If the return value of ib_sa_mcmember_rec_delete() is negative, it
- * is an error code. Otherwise it is a query ID that can be used to
- * cancel the query.
+ * If the join operation fails; status will be non-zero, with the following
+ * failures possible:
+ * -ETIMEDOUT: The request timed out.
+ * -EIO: An error occurred sending the query.
+ * -EINVAL: The MCMemberRecord values differed from the existing group's.
+ * -ENETRESET: Indicates that an fatal error has occurred on the multicast
+ * group, and the user must rejoin the group to continue using it.
*/
-static inline int
-ib_sa_mcmember_rec_delete(struct ib_sa_client *client,
- struct ib_device *device, u8 port_num,
- struct ib_sa_mcmember_rec *rec,
- ib_sa_comp_mask comp_mask,
- int timeout_ms, gfp_t gfp_mask,
- void (*callback)(int status,
- struct ib_sa_mcmember_rec *resp,
- void *context),
- void *context,
- struct ib_sa_query **query)
-{
- return ib_sa_mcmember_rec_query(client, device, port_num,
- IB_SA_METHOD_DELETE,
- rec, comp_mask,
- timeout_ms, gfp_mask, callback,
- context, query);
-}
+struct ib_sa_multicast *ib_sa_join_multicast(struct ib_sa_client *client,
+ struct ib_device *device, u8 port_num,
+ struct ib_sa_mcmember_rec *rec,
+ ib_sa_comp_mask comp_mask, gfp_t gfp_mask,
+ int (*callback)(int status,
+ struct ib_sa_multicast
+ *multicast),
+ void *context);
+
+/**
+ * ib_free_multicast - Frees the multicast tracking structure, and releases
+ * any reference on the multicast group.
+ * @multicast: Multicast tracking structure allocated by ib_join_multicast.
+ *
+ * This call blocks until the multicast identifier is destroyed. It may
+ * not be called from within the multicast callback; however, returning a non-
+ * zero value from the callback will result in destroying the multicast
+ * tracking structure.
+ */
+void ib_sa_free_multicast(struct ib_sa_multicast *multicast);
+
+/**
+ * ib_get_mcmember_rec - Looks up a multicast member record by its MGID and
+ * returns it if found.
+ * @device: Device associated with the multicast group.
+ * @port_num: Port on the specified device to associate with the multicast
+ * group.
+ * @mgid: MGID of multicast group.
+ * @rec: Location to copy SA multicast member record.
+ */
+int ib_sa_get_mcmember_rec(struct ib_device *device, u8 port_num,
+ union ib_gid *mgid, struct ib_sa_mcmember_rec *rec);
+
+/**
+ * ib_init_ah_from_mcmember - Initialize address handle attributes based on
+ * an SA multicast member record.
+ */
+int ib_init_ah_from_mcmember(struct ib_device *device, u8 port_num,
+ struct ib_sa_mcmember_rec *rec,
+ struct ib_ah_attr *ah_attr);
/**
* ib_init_ah_from_path - Initialize address handle attributes based on an SA
diff --git a/include/rdma/rdma_cm.h b/include/rdma/rdma_cm.h
index 36cd8a8..2d6a770 100644
--- a/include/rdma/rdma_cm.h
+++ b/include/rdma/rdma_cm.h
@@ -52,10 +52,13 @@
RDMA_CM_EVENT_ESTABLISHED,
RDMA_CM_EVENT_DISCONNECTED,
RDMA_CM_EVENT_DEVICE_REMOVAL,
+ RDMA_CM_EVENT_MULTICAST_JOIN,
+ RDMA_CM_EVENT_MULTICAST_ERROR
};
enum rdma_port_space {
RDMA_PS_SDP = 0x0001,
+ RDMA_PS_IPOIB= 0x0002,
RDMA_PS_TCP = 0x0106,
RDMA_PS_UDP = 0x0111,
RDMA_PS_SCTP = 0x0183
@@ -294,5 +297,21 @@
*/
int rdma_disconnect(struct rdma_cm_id *id);
-#endif /* RDMA_CM_H */
+/**
+ * rdma_join_multicast - Join the multicast group specified by the given
+ * address.
+ * @id: Communication identifier associated with the request.
+ * @addr: Multicast address identifying the group to join.
+ * @context: User-defined context associated with the join request, returned
+ * to the user through the private_data pointer in multicast events.
+ */
+int rdma_join_multicast(struct rdma_cm_id *id, struct sockaddr *addr,
+ void *context);
+/**
+ * rdma_leave_multicast - Leave the multicast group specified by the given
+ * address.
+ */
+void rdma_leave_multicast(struct rdma_cm_id *id, struct sockaddr *addr);
+
+#endif /* RDMA_CM_H */
diff --git a/include/rdma/rdma_cm_ib.h b/include/rdma/rdma_cm_ib.h
index 9b176df..950424b 100644
--- a/include/rdma/rdma_cm_ib.h
+++ b/include/rdma/rdma_cm_ib.h
@@ -44,7 +44,7 @@
int rdma_set_ib_paths(struct rdma_cm_id *id,
struct ib_sa_path_rec *path_rec, int num_paths);
-/* Global qkey for UD QPs and multicast groups. */
-#define RDMA_UD_QKEY 0x01234567
+/* Global qkey for UDP QPs and multicast groups. */
+#define RDMA_UDP_QKEY 0x01234567
#endif /* RDMA_CM_IB_H */
diff --git a/include/rdma/rdma_user_cm.h b/include/rdma/rdma_user_cm.h
index 9572ab8..f632b0c 100644
--- a/include/rdma/rdma_user_cm.h
+++ b/include/rdma/rdma_user_cm.h
@@ -38,7 +38,7 @@
#include <rdma/ib_user_verbs.h>
#include <rdma/ib_user_sa.h>
-#define RDMA_USER_CM_ABI_VERSION 3
+#define RDMA_USER_CM_ABI_VERSION 4
#define RDMA_MAX_PRIVATE_DATA 256
@@ -58,7 +58,9 @@
RDMA_USER_CM_CMD_GET_EVENT,
RDMA_USER_CM_CMD_GET_OPTION,
RDMA_USER_CM_CMD_SET_OPTION,
- RDMA_USER_CM_CMD_NOTIFY
+ RDMA_USER_CM_CMD_NOTIFY,
+ RDMA_USER_CM_CMD_JOIN_MCAST,
+ RDMA_USER_CM_CMD_LEAVE_MCAST
};
/*
@@ -188,6 +190,13 @@
__u32 event;
};
+struct rdma_ucm_join_mcast {
+ __u64 response; /* rdma_ucm_create_id_resp */
+ __u64 uid;
+ struct sockaddr_in6 addr;
+ __u32 id;
+};
+
struct rdma_ucm_get_event {
__u64 response;
};
diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h
index ebf31b1..9dd37e2 100644
--- a/include/scsi/scsi_device.h
+++ b/include/scsi/scsi_device.h
@@ -122,6 +122,7 @@
unsigned no_uld_attach:1; /* disable connecting to upper level drivers */
unsigned select_no_atn:1;
unsigned fix_capacity:1; /* READ_CAPACITY is too high by 1 */
+ unsigned guess_capacity:1; /* READ_CAPACITY might be too high by 1 */
unsigned retry_hwerror:1; /* Retry HARDWARE_ERROR */
unsigned int device_blocked; /* Device returned QUEUE_FULL. */
diff --git a/kernel/kmod.c b/kernel/kmod.c
index 7962761..9f923f8 100644
--- a/kernel/kmod.c
+++ b/kernel/kmod.c
@@ -36,6 +36,8 @@
#include <linux/resource.h>
#include <asm/uaccess.h>
+extern int delete_module(const char *name, unsigned int flags);
+
extern int max_threads;
static struct workqueue_struct *khelper_wq;
@@ -46,6 +48,7 @@
modprobe_path is set via /proc/sys.
*/
char modprobe_path[KMOD_PATH_LEN] = "/sbin/modprobe";
+struct module_kobject kmod_mk;
/**
* request_module - try to load a kernel module
@@ -75,6 +78,11 @@
static atomic_t kmod_concurrent = ATOMIC_INIT(0);
#define MAX_KMOD_CONCURRENT 50 /* Completely arbitrary value - KAO */
static int kmod_loop_msg;
+ char modalias[16 + MODULE_NAME_LEN] = "MODALIAS=";
+ char *uevent_envp[2] = {
+ modalias,
+ NULL
+ };
va_start(args, fmt);
ret = vsnprintf(module_name, MODULE_NAME_LEN, fmt, args);
@@ -82,6 +90,12 @@
if (ret >= MODULE_NAME_LEN)
return -ENAMETOOLONG;
+ strcpy(&modalias[strlen("MODALIAS=")], module_name);
+ kobject_uevent_env(&kmod_mk.kobj, KOBJ_CHANGE, uevent_envp);
+
+ if (modprobe_path[0] == '\0')
+ goto out;
+
/* If modprobe needs a service that is in a module, we get a recursive
* loop. Limit the number of running kmod threads to max_threads/2 or
* MAX_KMOD_CONCURRENT, whichever is the smaller. A cleaner method
@@ -108,9 +122,115 @@
ret = call_usermodehelper(modprobe_path, argv, envp, 1);
atomic_dec(&kmod_concurrent);
+out:
return ret;
}
EXPORT_SYMBOL(request_module);
+
+static ssize_t store_mod_request(struct module_attribute *mattr,
+ struct module *mod,
+ const char *buffer, size_t count)
+{
+ char name[MODULE_NAME_LEN];
+ int ret;
+
+ if (count < 1 || count+1 > MODULE_NAME_LEN)
+ return -EINVAL;
+ memcpy(name, buffer, count);
+ name[count] = '\0';
+ if (name[count-1] == '\n')
+ name[count-1] = '\0';
+
+ ret = request_module(name);
+ if (ret < 0)
+ return ret;
+ return count;
+}
+
+static struct module_attribute mod_request = {
+ .attr = { .name = "mod_request", .mode = S_IWUSR, .owner = THIS_MODULE },
+ .store = store_mod_request,
+};
+
+#ifdef CONFIG_MODULE_UNLOAD
+static ssize_t store_mod_unload(struct module_attribute *mattr,
+ struct module *mod,
+ const char *buffer, size_t count)
+{
+ char name[MODULE_NAME_LEN];
+ int ret;
+
+ if (count < 1 || count+1 > MODULE_NAME_LEN)
+ return -EINVAL;
+ memcpy(name, buffer, count);
+ name[count] = '\0';
+ if (name[count-1] == '\n')
+ name[count-1] = '\0';
+
+ ret = delete_module(name, O_NONBLOCK);
+ if (ret < 0)
+ return ret;
+ return count;
+}
+
+static struct module_attribute mod_unload = {
+ .attr = { .name = "mod_unload", .mode = S_IWUSR, .owner = THIS_MODULE },
+ .store = store_mod_unload,
+};
+#endif
+
+static ssize_t show_mod_request_helper(struct module_attribute *mattr,
+ struct module *mod,
+ char *buffer)
+{
+ return sprintf(buffer, "%s\n", modprobe_path);
+}
+
+static ssize_t store_mod_request_helper(struct module_attribute *mattr,
+ struct module *mod,
+ const char *buffer, size_t count)
+{
+ if (count < 1 || count+1 > KMOD_PATH_LEN)
+ return -EINVAL;
+ memcpy(modprobe_path, buffer, count);
+ modprobe_path[count] = '\0';
+ if (modprobe_path[count-1] == '\n')
+ modprobe_path[count-1] = '\0';
+ return count;
+}
+
+static struct module_attribute mod_request_helper = {
+ .attr = {
+ .name = "mod_request_helper",
+ .mode = S_IWUSR | S_IRUGO,
+ .owner = THIS_MODULE
+ },
+ .show = show_mod_request_helper,
+ .store = store_mod_request_helper,
+};
+
+void __init kmod_sysfs_init(void)
+{
+ int ret;
+
+ kmod_mk.mod = THIS_MODULE;
+ kobj_set_kset_s(&kmod_mk, module_subsys);
+ kobject_set_name(&kmod_mk.kobj, "kmod");
+ kobject_init(&kmod_mk.kobj);
+ ret = kobject_add(&kmod_mk.kobj);
+ if (ret < 0)
+ goto out;
+
+ ret = sysfs_create_file(&kmod_mk.kobj, &mod_request_helper.attr);
+ ret = sysfs_create_file(&kmod_mk.kobj, &mod_request.attr);
+#ifdef CONFIG_MODULE_UNLOAD
+ ret = sysfs_create_file(&kmod_mk.kobj, &mod_unload.attr);
+#endif
+
+ kobject_uevent(&kmod_mk.kobj, KOBJ_ADD);
+out:
+ return;
+}
#endif /* CONFIG_KMOD */
struct subprocess_info {
diff --git a/kernel/module.c b/kernel/module.c
index 8a94e05..8c25b1a 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -653,20 +653,11 @@
mutex_lock(&module_mutex);
}
-asmlinkage long
-sys_delete_module(const char __user *name_user, unsigned int flags)
+int delete_module(const char *name, unsigned int flags)
{
struct module *mod;
- char name[MODULE_NAME_LEN];
int ret, forced = 0;
- if (!capable(CAP_SYS_MODULE))
- return -EPERM;
-
- if (strncpy_from_user(name, name_user, MODULE_NAME_LEN-1) < 0)
- return -EFAULT;
- name[MODULE_NAME_LEN-1] = '\0';
-
if (mutex_lock_interruptible(&module_mutex) != 0)
return -EINTR;
@@ -727,6 +718,21 @@
return ret;
}
+asmlinkage long
+sys_delete_module(const char __user *name_user, unsigned int flags)
+{
+ char name[MODULE_NAME_LEN];
+
+ if (!capable(CAP_SYS_MODULE))
+ return -EPERM;
+
+ if (strncpy_from_user(name, name_user, MODULE_NAME_LEN-1) < 0)
+ return -EFAULT;
+ name[MODULE_NAME_LEN-1] = '\0';
+
+ return delete_module(name, flags);
+}
+
static void print_unload_info(struct seq_file *m, struct module *mod)
{
struct module_use *use;
@@ -1068,7 +1074,8 @@
}
#endif /* CONFIG_KALLSYMS */
-static int module_add_modinfo_attrs(struct module *mod)
+#ifdef CONFIG_SYSFS
+int module_add_modinfo_attrs(struct module *mod)
{
struct module_attribute *attr;
struct module_attribute *temp_attr;
@@ -1094,7 +1101,7 @@
return error;
}
-static void module_remove_modinfo_attrs(struct module *mod)
+void module_remove_modinfo_attrs(struct module *mod)
{
struct module_attribute *attr;
int i;
@@ -1109,8 +1116,10 @@
}
kfree(mod->modinfo_attrs);
}
+#endif
-static int mod_sysfs_init(struct module *mod)
+#ifdef CONFIG_SYSFS
+int mod_sysfs_init(struct module *mod)
{
int err;
@@ -1133,7 +1142,7 @@
return err;
}
-static int mod_sysfs_setup(struct module *mod,
+int mod_sysfs_setup(struct module *mod,
struct kernel_param *kparam,
unsigned int num_params)
{
@@ -1169,16 +1178,14 @@
out:
return err;
}
+#endif
static void mod_kobject_remove(struct module *mod)
{
module_remove_modinfo_attrs(mod);
module_param_sysfs_remove(mod);
- if (mod->mkobj.drivers_dir)
- kobject_unregister(mod->mkobj.drivers_dir);
- if (mod->holders_dir)
- kobject_unregister(mod->holders_dir);
-
+ kobject_unregister(mod->mkobj.drivers_dir);
+ kobject_unregister(mod->holders_dir);
kobject_unregister(&mod->mkobj.kobj);
}
@@ -2345,6 +2352,7 @@
printk("\n");
}
+#ifdef CONFIG_SYSFS
static char *make_driver_name(struct device_driver *drv)
{
char *driver_name;
@@ -2419,6 +2427,7 @@
}
}
EXPORT_SYMBOL(module_remove_driver);
+#endif
#ifdef CONFIG_MODVERSIONS
/* Generate the signature for struct module here, too, for modversions. */
diff --git a/kernel/params.c b/kernel/params.c
index 553cf7d..7a75157 100644
--- a/kernel/params.c
+++ b/kernel/params.c
@@ -30,8 +30,6 @@
#define DEBUGP(fmt, a...)
#endif
-static struct kobj_type module_ktype;
-
static inline char dash2underscore(char c)
{
if (c == '-')
@@ -391,6 +389,7 @@
struct param_attribute attrs[0];
};
+#ifdef CONFIG_SYSFS
#define to_param_attr(n) container_of(n, struct param_attribute, mattr);
static ssize_t param_attr_show(struct module_attribute *mattr,
@@ -426,6 +425,7 @@
return len;
return err;
}
+#endif
#ifdef CONFIG_MODULES
#define __modinit
@@ -433,6 +433,7 @@
#define __modinit __init
#endif
+#ifdef CONFIG_SYSFS
/*
* param_sysfs_setup - setup sysfs support for one module or KBUILD_MODNAME
* @mk: struct module_kobject (contains parent kobject)
@@ -500,9 +501,7 @@
return mp;
}
-
#ifdef CONFIG_MODULES
-
/*
* module_param_sysfs_setup - setup sysfs support for one module
* @mod: module
@@ -625,7 +624,6 @@
/* module-related sysfs stuff */
-#ifdef CONFIG_SYSFS
#define to_module_attr(n) container_of(n, struct module_attribute, attr);
#define to_module_kobject(n) container_of(n, struct module_kobject, kobj);
@@ -673,6 +671,8 @@
.store = module_attr_store,
};
+static struct kobj_type module_ktype;
+
static int uevent_filter(struct kset *kset, struct kobject *kobj)
{
struct kobj_type *ktype = get_ktype(kobj);
@@ -686,19 +686,12 @@
.filter = uevent_filter,
};
-#else
-static struct sysfs_ops module_sysfs_ops = {
- .show = NULL,
- .store = NULL,
-};
-#endif
+decl_subsys(module, &module_ktype, &module_uevent_ops);
static struct kobj_type module_ktype = {
.sysfs_ops = &module_sysfs_ops,
};
-decl_subsys(module, &module_ktype, &module_uevent_ops);
-
/*
* param_sysfs_init - wrapper for built-in params support
*/
@@ -714,11 +707,21 @@
}
param_sysfs_builtin();
+ kmod_sysfs_init();
return 0;
}
subsys_initcall(param_sysfs_init);
+#else
+#if 0
+static struct sysfs_ops module_sysfs_ops = {
+ .show = NULL,
+ .store = NULL,
+};
+#endif
+#endif
+
EXPORT_SYMBOL(param_set_byte);
EXPORT_SYMBOL(param_get_byte);
EXPORT_SYMBOL(param_set_short);
diff --git a/lib/kobject.c b/lib/kobject.c
index 2782f49..f4f6176 100644
--- a/lib/kobject.c
+++ b/lib/kobject.c
@@ -171,7 +171,7 @@
return -ENOENT;
if (!kobj->k_name)
kobj->k_name = kobj->name;
- if (!kobj->k_name) {
+ if (!*kobj->k_name) {
pr_debug("kobject attempted to be registered with no name!\n");
WARN_ON(1);
return -EINVAL;
@@ -326,6 +326,7 @@
/**
* kobject_rename - change the name of an object
* @kobj: object in question.
+ * @new_parent: object's new parent
* @new_name: object's new name
*/
diff --git a/sound/arm/aaci.c b/sound/arm/aaci.c
index 53675cf..5190d7a 100644
--- a/sound/arm/aaci.c
+++ b/sound/arm/aaci.c
@@ -65,10 +65,12 @@
* SI1TxEn, SI2TxEn and SI12TxEn bits are set in the AACI_MAINCR
* register.
*/
-static void aaci_ac97_write(struct snd_ac97 *ac97, unsigned short reg, unsigned short val)
+static void aaci_ac97_write(struct snd_ac97 *ac97, unsigned short reg,
+ unsigned short val)
{
struct aaci *aaci = ac97->private_data;
u32 v;
+ int timeout = 5000;
if (ac97->num >= 4)
return;
@@ -89,7 +91,11 @@
*/
do {
v = readl(aaci->base + AACI_SLFR);
- } while (v & (SLFR_1TXB|SLFR_2TXB));
+ } while ((v & (SLFR_1TXB|SLFR_2TXB)) && timeout--);
+
+ if (!timeout)
+ dev_err(&aaci->dev->dev,
+ "timeout waiting for write to complete\n");
mutex_unlock(&aaci->ac97_sem);
}
@@ -101,6 +107,8 @@
{
struct aaci *aaci = ac97->private_data;
u32 v;
+ int timeout = 5000;
+ int retries = 10;
if (ac97->num >= 4)
return ~0;
@@ -119,7 +127,13 @@
*/
do {
v = readl(aaci->base + AACI_SLFR);
- } while (v & SLFR_1TXB);
+ } while ((v & SLFR_1TXB) && timeout--);
+
+ if (!timeout) {
+ dev_err(&aaci->dev->dev, "timeout on slot 1 TX busy\n");
+ v = ~0;
+ goto out;
+ }
/*
* Give the AC'97 codec more than enough time
@@ -130,21 +144,35 @@
/*
* Wait for slot 2 to indicate data.
*/
+ timeout = 5000;
do {
cond_resched();
v = readl(aaci->base + AACI_SLFR) & (SLFR_1RXV|SLFR_2RXV);
- } while (v != (SLFR_1RXV|SLFR_2RXV));
+ } while ((v != (SLFR_1RXV|SLFR_2RXV)) && timeout--);
- v = readl(aaci->base + AACI_SL1RX) >> 12;
- if (v == reg) {
- v = readl(aaci->base + AACI_SL2RX) >> 4;
- } else {
- dev_err(&aaci->dev->dev,
- "wrong ac97 register read back (%x != %x)\n",
- v, reg);
+ if (!timeout) {
+ dev_err(&aaci->dev->dev, "timeout on RX valid\n");
v = ~0;
+ goto out;
}
+ do {
+ v = readl(aaci->base + AACI_SL1RX) >> 12;
+ if (v == reg) {
+ v = readl(aaci->base + AACI_SL2RX) >> 4;
+ break;
+ } else if (--retries) {
+ dev_warn(&aaci->dev->dev,
+ "ac97 read back fail. retry\n");
+ continue;
+ } else {
+ dev_warn(&aaci->dev->dev,
+ "wrong ac97 register read back (%x != %x)\n",
+ v, reg);
+ v = ~0;
+ }
+ } while (retries);
+ out:
mutex_unlock(&aaci->ac97_sem);
return v;
}
@@ -164,10 +192,70 @@
/*
* Interrupt support.
*/
-static void aaci_fifo_irq(struct aaci *aaci, u32 mask)
+static void aaci_fifo_irq(struct aaci *aaci, int channel, u32 mask)
{
+ if (mask & ISR_ORINTR) {
+ dev_warn(&aaci->dev->dev, "RX overrun on chan %d\n", channel);
+ writel(ICLR_RXOEC1 << channel, aaci->base + AACI_INTCLR);
+ }
+
+ if (mask & ISR_RXTOINTR) {
+ dev_warn(&aaci->dev->dev, "RX timeout on chan %d\n", channel);
+ writel(ICLR_RXTOFEC1 << channel, aaci->base + AACI_INTCLR);
+ }
+
+ if (mask & ISR_RXINTR) {
+ struct aaci_runtime *aacirun = &aaci->capture;
+ void *ptr;
+
+ if (!aacirun->substream || !aacirun->start) {
+ dev_warn(&aaci->dev->dev, "RX interrupt???");
+ writel(0, aacirun->base + AACI_IE);
+ return;
+ }
+ ptr = aacirun->ptr;
+
+ do {
+ unsigned int len = aacirun->fifosz;
+ u32 val;
+
+ if (aacirun->bytes <= 0) {
+ aacirun->bytes += aacirun->period;
+ aacirun->ptr = ptr;
+ spin_unlock(&aaci->lock);
+ snd_pcm_period_elapsed(aacirun->substream);
+ spin_lock(&aaci->lock);
+ }
+ if (!(aacirun->cr & CR_EN))
+ break;
+
+ val = readl(aacirun->base + AACI_SR);
+ if (!(val & SR_RXHF))
+ break;
+ if (!(val & SR_RXFF))
+ len >>= 1;
+
+ aacirun->bytes -= len;
+
+ /* reading 16 bytes at a time */
+ for( ; len > 0; len -= 16) {
+ asm(
+ "ldmia %1, {r0, r1, r2, r3}\n\t"
+ "stmia %0!, {r0, r1, r2, r3}"
+ : "+r" (ptr)
+ : "r" (aacirun->fifo)
+ : "r0", "r1", "r2", "r3", "cc");
+
+ if (ptr >= aacirun->end)
+ ptr = aacirun->start;
+ }
+ } while(1);
+ aacirun->ptr = ptr;
+ }
+
if (mask & ISR_URINTR) {
- writel(ICLR_TXUEC1, aaci->base + AACI_INTCLR);
+ dev_dbg(&aaci->dev->dev, "TX underrun on chan %d\n", channel);
+ writel(ICLR_TXUEC1 << channel, aaci->base + AACI_INTCLR);
}
if (mask & ISR_TXINTR) {
@@ -192,7 +280,7 @@
snd_pcm_period_elapsed(aacirun->substream);
spin_lock(&aaci->lock);
}
- if (!(aacirun->cr & TXCR_TXEN))
+ if (!(aacirun->cr & CR_EN))
break;
val = readl(aacirun->base + AACI_SR);
@@ -233,7 +321,7 @@
u32 m = mask;
for (i = 0; i < 4; i++, m >>= 7) {
if (m & 0x7f) {
- aaci_fifo_irq(aaci, m);
+ aaci_fifo_irq(aaci, i, m);
}
}
}
@@ -330,8 +418,9 @@
.periods_max = PAGE_SIZE / 16,
};
-static int aaci_pcm_open(struct aaci *aaci, struct snd_pcm_substream *substream,
- struct aaci_runtime *aacirun)
+static int __aaci_pcm_open(struct aaci *aaci,
+ struct snd_pcm_substream *substream,
+ struct aaci_runtime *aacirun)
{
struct snd_pcm_runtime *runtime = substream->runtime;
int ret;
@@ -380,7 +469,7 @@
struct aaci *aaci = substream->private_data;
struct aaci_runtime *aacirun = substream->runtime->private_data;
- WARN_ON(aacirun->cr & TXCR_TXEN);
+ WARN_ON(aacirun->cr & CR_EN);
aacirun->substream = NULL;
free_irq(aaci->dev->irq[0], aaci);
@@ -395,7 +484,7 @@
/*
* This must not be called with the device enabled.
*/
- WARN_ON(aacirun->cr & TXCR_TXEN);
+ WARN_ON(aacirun->cr & CR_EN);
if (aacirun->pcm_open)
snd_ac97_pcm_close(aacirun->pcm);
@@ -422,9 +511,15 @@
if (err < 0)
goto out;
- err = snd_ac97_pcm_open(aacirun->pcm, params_rate(params),
- params_channels(params),
- aacirun->pcm->r[0].slots);
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ err = snd_ac97_pcm_open(aacirun->pcm, params_rate(params),
+ params_channels(params),
+ aacirun->pcm->r[0].slots);
+ else
+ err = snd_ac97_pcm_open(aacirun->pcm, params_rate(params),
+ params_channels(params),
+ aacirun->pcm->r[1].slots);
+
if (err)
goto out;
@@ -467,9 +562,9 @@
* Playback specific ALSA stuff
*/
static const u32 channels_to_txmask[] = {
- [2] = TXCR_TX3 | TXCR_TX4,
- [4] = TXCR_TX3 | TXCR_TX4 | TXCR_TX7 | TXCR_TX8,
- [6] = TXCR_TX3 | TXCR_TX4 | TXCR_TX7 | TXCR_TX8 | TXCR_TX6 | TXCR_TX9,
+ [2] = CR_SL3 | CR_SL4,
+ [4] = CR_SL3 | CR_SL4 | CR_SL7 | CR_SL8,
+ [6] = CR_SL3 | CR_SL4 | CR_SL7 | CR_SL8 | CR_SL6 | CR_SL9,
};
/*
@@ -504,7 +599,7 @@
chan_mask);
}
-static int aaci_pcm_playback_open(struct snd_pcm_substream *substream)
+static int aaci_pcm_open(struct snd_pcm_substream *substream)
{
struct aaci *aaci = substream->private_data;
int ret;
@@ -519,7 +614,12 @@
if (ret)
return ret;
- return aaci_pcm_open(aaci, substream, &aaci->playback);
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ ret = __aaci_pcm_open(aaci, substream, &aaci->playback);
+ } else {
+ ret = __aaci_pcm_open(aaci, substream, &aaci->capture);
+ }
+ return ret;
}
static int aaci_pcm_playback_hw_params(struct snd_pcm_substream *substream,
@@ -540,11 +640,11 @@
* FIXME: double rate slots?
*/
if (ret >= 0) {
- aacirun->cr = TXCR_FEN | TXCR_COMPACT | TXCR_TSZ16;
+ aacirun->cr = CR_FEN | CR_COMPACT | CR_SZ16;
aacirun->cr |= channels_to_txmask[channels];
aacirun->fifosz = aaci->fifosize * 4;
- if (aacirun->cr & TXCR_COMPACT)
+ if (aacirun->cr & CR_COMPACT)
aacirun->fifosz >>= 1;
}
return ret;
@@ -557,7 +657,7 @@
ie = readl(aacirun->base + AACI_IE);
ie &= ~(IE_URIE|IE_TXIE);
writel(ie, aacirun->base + AACI_IE);
- aacirun->cr &= ~TXCR_TXEN;
+ aacirun->cr &= ~CR_EN;
aaci_chan_wait_ready(aacirun);
writel(aacirun->cr, aacirun->base + AACI_TXCR);
}
@@ -567,7 +667,7 @@
u32 ie;
aaci_chan_wait_ready(aacirun);
- aacirun->cr |= TXCR_TXEN;
+ aacirun->cr |= CR_EN;
ie = readl(aacirun->base + AACI_IE);
ie |= IE_URIE | IE_TXIE;
@@ -615,7 +715,7 @@
}
static struct snd_pcm_ops aaci_playback_ops = {
- .open = aaci_pcm_playback_open,
+ .open = aaci_pcm_open,
.close = aaci_pcm_close,
.ioctl = snd_pcm_lib_ioctl,
.hw_params = aaci_pcm_playback_hw_params,
@@ -626,7 +726,133 @@
.mmap = aaci_pcm_mmap,
};
+static int aaci_pcm_capture_hw_params(snd_pcm_substream_t *substream,
+ snd_pcm_hw_params_t *params)
+{
+ struct aaci *aaci = substream->private_data;
+ struct aaci_runtime *aacirun = substream->runtime->private_data;
+ int ret;
+ ret = aaci_pcm_hw_params(substream, aacirun, params);
+
+ if (ret >= 0) {
+ aacirun->cr = CR_FEN | CR_COMPACT | CR_SZ16;
+
+ /* Line in record: slot 3 and 4 */
+ aacirun->cr |= CR_SL3 | CR_SL4;
+
+ aacirun->fifosz = aaci->fifosize * 4;
+
+ if (aacirun->cr & CR_COMPACT)
+ aacirun->fifosz >>= 1;
+ }
+ return ret;
+}
+
+static void aaci_pcm_capture_stop(struct aaci_runtime *aacirun)
+{
+ u32 ie;
+
+ aaci_chan_wait_ready(aacirun);
+
+ ie = readl(aacirun->base + AACI_IE);
+ ie &= ~(IE_ORIE | IE_RXIE);
+ writel(ie, aacirun->base+AACI_IE);
+
+ aacirun->cr &= ~CR_EN;
+
+ writel(aacirun->cr, aacirun->base + AACI_RXCR);
+}
+
+static void aaci_pcm_capture_start(struct aaci_runtime *aacirun)
+{
+ u32 ie;
+
+ aaci_chan_wait_ready(aacirun);
+
+#ifdef DEBUG
+ /* RX Timeout value: bits 28:17 in RXCR */
+ aacirun->cr |= 0xf << 17;
+#endif
+
+ aacirun->cr |= CR_EN;
+ writel(aacirun->cr, aacirun->base + AACI_RXCR);
+
+ ie = readl(aacirun->base + AACI_IE);
+ ie |= IE_ORIE |IE_RXIE; // overrun and rx interrupt -- half full
+ writel(ie, aacirun->base + AACI_IE);
+}
+
+static int aaci_pcm_capture_trigger(snd_pcm_substream_t *substream, int cmd){
+
+ struct aaci *aaci = substream->private_data;
+ struct aaci_runtime *aacirun = substream->runtime->private_data;
+ unsigned long flags;
+ int ret = 0;
+
+ spin_lock_irqsave(&aaci->lock, flags);
+
+ switch (cmd) {
+ case SNDRV_PCM_TRIGGER_START:
+ aaci_pcm_capture_start(aacirun);
+ break;
+
+ case SNDRV_PCM_TRIGGER_RESUME:
+ aaci_pcm_capture_start(aacirun);
+ break;
+
+ case SNDRV_PCM_TRIGGER_STOP:
+ aaci_pcm_capture_stop(aacirun);
+ break;
+
+ case SNDRV_PCM_TRIGGER_SUSPEND:
+ aaci_pcm_capture_stop(aacirun);
+ break;
+
+ case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+ break;
+
+ case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+ break;
+
+ default:
+ ret = -EINVAL;
+ }
+
+ spin_unlock_irqrestore(&aaci->lock, flags);
+
+ return ret;
+}
+
+static int aaci_pcm_capture_prepare(snd_pcm_substream_t *substream)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct aaci *aaci = substream->private_data;
+
+ aaci_pcm_prepare(substream);
+
+ /* allow changing of sample rate */
+ aaci_ac97_write(aaci->ac97, AC97_EXTENDED_STATUS, 0x0001); /* VRA */
+ aaci_ac97_write(aaci->ac97, AC97_PCM_LR_ADC_RATE, runtime->rate);
+ aaci_ac97_write(aaci->ac97, AC97_PCM_MIC_ADC_RATE, runtime->rate);
+
+ /* Record select: Mic: 0, Aux: 3, Line: 4 */
+ aaci_ac97_write(aaci->ac97, AC97_REC_SEL, 0x0404);
+
+ return 0;
+}
+
+static snd_pcm_ops_t aaci_capture_ops = {
+ .open = aaci_pcm_open,
+ .close = aaci_pcm_close,
+ .ioctl = snd_pcm_lib_ioctl,
+ .hw_params = aaci_pcm_capture_hw_params,
+ .hw_free = aaci_pcm_hw_free,
+ .prepare = aaci_pcm_capture_prepare,
+ .trigger = aaci_pcm_capture_trigger,
+ .pointer = aaci_pcm_pointer,
+ .mmap = aaci_pcm_mmap,
+};
/*
* Power Management.
@@ -666,7 +892,7 @@
static struct ac97_pcm ac97_defs[] __devinitdata = {
- [0] = { /* Front PCM */
+ [0] = { /* Front PCM */
.exclusive = 1,
.r = {
[0] = {
@@ -740,6 +966,7 @@
ret = snd_ac97_mixer(ac97_bus, &ac97_template, &ac97);
if (ret)
goto out;
+ aaci->ac97 = ac97;
/*
* Disable AC97 PC Beep input on audio codecs.
@@ -752,6 +979,7 @@
goto out;
aaci->playback.pcm = &ac97_bus->pcms[0];
+ aaci->capture.pcm = &ac97_bus->pcms[1];
out:
return ret;
@@ -801,7 +1029,7 @@
struct snd_pcm *pcm;
int ret;
- ret = snd_pcm_new(aaci->card, "AACI AC'97", 0, 1, 0, &pcm);
+ ret = snd_pcm_new(aaci->card, "AACI AC'97", 0, 1, 1, &pcm);
if (ret == 0) {
aaci->pcm = pcm;
pcm->private_data = aaci;
@@ -810,6 +1038,7 @@
strlcpy(pcm->name, DRIVER_NAME, sizeof(pcm->name));
snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &aaci_playback_ops);
+ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &aaci_capture_ops);
}
return ret;
@@ -817,15 +1046,15 @@
static unsigned int __devinit aaci_size_fifo(struct aaci *aaci)
{
- void __iomem *base = aaci->base + AACI_CSCH1;
+ struct aaci_runtime *aacirun = &aaci->playback;
int i;
- writel(TXCR_FEN | TXCR_TSZ16 | TXCR_TXEN, base + AACI_TXCR);
+ writel(CR_FEN | CR_SZ16 | CR_EN, aacirun->base + AACI_TXCR);
- for (i = 0; !(readl(base + AACI_SR) & SR_TXFF) && i < 4096; i++)
- writel(0, aaci->base + AACI_DR1);
+ for (i = 0; !(readl(aacirun->base + AACI_SR) & SR_TXFF) && i < 4096; i++)
+ writel(0, aacirun->fifo);
- writel(0, base + AACI_TXCR);
+ writel(0, aacirun->base + AACI_TXCR);
/*
* Re-initialise the AACI after the FIFO depth test, to
@@ -872,6 +1101,12 @@
aaci->playback.base = aaci->base + AACI_CSCH1;
aaci->playback.fifo = aaci->base + AACI_DR1;
+ /*
+ * Capture uses AACI channel 0
+ */
+ aaci->capture.base = aaci->base + AACI_CSCH1;
+ aaci->capture.fifo = aaci->base + AACI_DR1;
+
for (i = 0; i < 4; i++) {
void __iomem *base = aaci->base + i * 0x14;
@@ -907,7 +1142,7 @@
ret = snd_card_register(aaci->card);
if (ret == 0) {
dev_info(&dev->dev, "%s, fifo %d\n", aaci->card->longname,
- aaci->fifosize);
+ aaci->fifosize);
amba_set_drvdata(dev, aaci->card);
return ret;
}
diff --git a/sound/arm/aaci.h b/sound/arm/aaci.h
index 9175ff9..924f69c 100644
--- a/sound/arm/aaci.h
+++ b/sound/arm/aaci.h
@@ -49,27 +49,27 @@
#define AACI_DR4 0x0f0 /* data read/written fifo 4 */
/*
- * transmit fifo control register. P48
+ * TX/RX fifo control register (CR). P48
*/
-#define TXCR_FEN (1 << 16) /* fifo enable */
-#define TXCR_COMPACT (1 << 15) /* compact mode */
-#define TXCR_TSZ16 (0 << 13) /* 16 bits */
-#define TXCR_TSZ18 (1 << 13) /* 18 bits */
-#define TXCR_TSZ20 (2 << 13) /* 20 bits */
-#define TXCR_TSZ12 (3 << 13) /* 12 bits */
-#define TXCR_TX12 (1 << 12) /* transmits slot 12 */
-#define TXCR_TX11 (1 << 11) /* transmits slot 12 */
-#define TXCR_TX10 (1 << 10) /* transmits slot 12 */
-#define TXCR_TX9 (1 << 9) /* transmits slot 12 */
-#define TXCR_TX8 (1 << 8) /* transmits slot 12 */
-#define TXCR_TX7 (1 << 7) /* transmits slot 12 */
-#define TXCR_TX6 (1 << 6) /* transmits slot 12 */
-#define TXCR_TX5 (1 << 5) /* transmits slot 12 */
-#define TXCR_TX4 (1 << 4) /* transmits slot 12 */
-#define TXCR_TX3 (1 << 3) /* transmits slot 12 */
-#define TXCR_TX2 (1 << 2) /* transmits slot 12 */
-#define TXCR_TX1 (1 << 1) /* transmits slot 12 */
-#define TXCR_TXEN (1 << 0) /* transmit enable */
+#define CR_FEN (1 << 16) /* fifo enable */
+#define CR_COMPACT (1 << 15) /* compact mode */
+#define CR_SZ16 (0 << 13) /* 16 bits */
+#define CR_SZ18 (1 << 13) /* 18 bits */
+#define CR_SZ20 (2 << 13) /* 20 bits */
+#define CR_SZ12 (3 << 13) /* 12 bits */
+#define CR_SL12 (1 << 12)
+#define CR_SL11 (1 << 11)
+#define CR_SL10 (1 << 10)
+#define CR_SL9 (1 << 9)
+#define CR_SL8 (1 << 8)
+#define CR_SL7 (1 << 7)
+#define CR_SL6 (1 << 6)
+#define CR_SL5 (1 << 5)
+#define CR_SL4 (1 << 4)
+#define CR_SL3 (1 << 3)
+#define CR_SL2 (1 << 2)
+#define CR_SL1 (1 << 1)
+#define CR_EN (1 << 0) /* transmit enable */
/*
* status register bits. P49
@@ -229,6 +229,7 @@
/* AC'97 */
struct mutex ac97_sem;
struct snd_ac97_bus *ac97_bus;
+ struct snd_ac97 *ac97;
u32 maincr;
spinlock_t lock;