| /* |
| * arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h |
| */ |
| |
| #ifndef __ASM_ARCH_EP93XX_REGS_H |
| #define __ASM_ARCH_EP93XX_REGS_H |
| |
| /* |
| * EP93xx linux memory map: |
| * |
| * virt phys size |
| * fe800000 5M per-platform mappings |
| * fed00000 80800000 2M APB |
| * fef00000 80000000 1M AHB |
| */ |
| |
| #define EP93XX_AHB_PHYS_BASE 0x80000000 |
| #define EP93XX_AHB_VIRT_BASE 0xfef00000 |
| #define EP93XX_AHB_SIZE 0x00100000 |
| |
| #define EP93XX_APB_PHYS_BASE 0x80800000 |
| #define EP93XX_APB_VIRT_BASE 0xfed00000 |
| #define EP93XX_APB_SIZE 0x00200000 |
| |
| |
| /* AHB peripherals */ |
| #define EP93XX_DMA_BASE (EP93XX_AHB_VIRT_BASE + 0x00000000) |
| |
| #define EP93XX_ETHERNET_BASE (EP93XX_AHB_VIRT_BASE + 0x00010000) |
| #define EP93XX_ETHERNET_PHYS_BASE (EP93XX_AHB_PHYS_BASE + 0x00010000) |
| |
| #define EP93XX_USB_BASE (EP93XX_AHB_VIRT_BASE + 0x00020000) |
| #define EP93XX_USB_PHYS_BASE (EP93XX_AHB_PHYS_BASE + 0x00020000) |
| |
| #define EP93XX_RASTER_BASE (EP93XX_AHB_VIRT_BASE + 0x00030000) |
| |
| #define EP93XX_GRAPHICS_ACCEL_BASE (EP93XX_AHB_VIRT_BASE + 0x00040000) |
| |
| #define EP93XX_SDRAM_CONTROLLER_BASE (EP93XX_AHB_VIRT_BASE + 0x00060000) |
| |
| #define EP93XX_PCMCIA_CONTROLLER_BASE (EP93XX_AHB_VIRT_BASE + 0x00080000) |
| |
| #define EP93XX_BOOT_ROM_BASE (EP93XX_AHB_VIRT_BASE + 0x00090000) |
| |
| #define EP93XX_IDE_BASE (EP93XX_AHB_VIRT_BASE + 0x000a0000) |
| |
| #define EP93XX_VIC1_BASE (EP93XX_AHB_VIRT_BASE + 0x000b0000) |
| |
| #define EP93XX_VIC2_BASE (EP93XX_AHB_VIRT_BASE + 0x000c0000) |
| |
| |
| /* APB peripherals */ |
| #define EP93XX_TIMER_BASE (EP93XX_APB_VIRT_BASE + 0x00010000) |
| #define EP93XX_TIMER_REG(x) (EP93XX_TIMER_BASE + (x)) |
| #define EP93XX_TIMER1_LOAD EP93XX_TIMER_REG(0x00) |
| #define EP93XX_TIMER1_VALUE EP93XX_TIMER_REG(0x04) |
| #define EP93XX_TIMER1_CONTROL EP93XX_TIMER_REG(0x08) |
| #define EP93XX_TIMER1_CLEAR EP93XX_TIMER_REG(0x0c) |
| #define EP93XX_TIMER2_LOAD EP93XX_TIMER_REG(0x20) |
| #define EP93XX_TIMER2_VALUE EP93XX_TIMER_REG(0x24) |
| #define EP93XX_TIMER2_CONTROL EP93XX_TIMER_REG(0x28) |
| #define EP93XX_TIMER2_CLEAR EP93XX_TIMER_REG(0x2c) |
| #define EP93XX_TIMER4_VALUE_LOW EP93XX_TIMER_REG(0x60) |
| #define EP93XX_TIMER4_VALUE_HIGH EP93XX_TIMER_REG(0x64) |
| #define EP93XX_TIMER3_LOAD EP93XX_TIMER_REG(0x80) |
| #define EP93XX_TIMER3_VALUE EP93XX_TIMER_REG(0x84) |
| #define EP93XX_TIMER3_CONTROL EP93XX_TIMER_REG(0x88) |
| #define EP93XX_TIMER3_CLEAR EP93XX_TIMER_REG(0x8c) |
| |
| #define EP93XX_I2S_BASE (EP93XX_APB_VIRT_BASE + 0x00020000) |
| |
| #define EP93XX_SECURITY_BASE (EP93XX_APB_VIRT_BASE + 0x00030000) |
| |
| #define EP93XX_GPIO_BASE (EP93XX_APB_VIRT_BASE + 0x00040000) |
| #define EP93XX_GPIO_REG(x) (EP93XX_GPIO_BASE + (x)) |
| #define EP93XX_GPIO_F_INT_TYPE1 EP93XX_GPIO_REG(0x4c) |
| #define EP93XX_GPIO_F_INT_TYPE2 EP93XX_GPIO_REG(0x50) |
| #define EP93XX_GPIO_F_INT_ACK EP93XX_GPIO_REG(0x54) |
| #define EP93XX_GPIO_F_INT_ENABLE EP93XX_GPIO_REG(0x58) |
| #define EP93XX_GPIO_F_INT_STATUS EP93XX_GPIO_REG(0x5c) |
| #define EP93XX_GPIO_A_INT_TYPE1 EP93XX_GPIO_REG(0x90) |
| #define EP93XX_GPIO_A_INT_TYPE2 EP93XX_GPIO_REG(0x94) |
| #define EP93XX_GPIO_A_INT_ACK EP93XX_GPIO_REG(0x98) |
| #define EP93XX_GPIO_A_INT_ENABLE EP93XX_GPIO_REG(0x9c) |
| #define EP93XX_GPIO_A_INT_STATUS EP93XX_GPIO_REG(0xa0) |
| #define EP93XX_GPIO_B_INT_TYPE1 EP93XX_GPIO_REG(0xac) |
| #define EP93XX_GPIO_B_INT_TYPE2 EP93XX_GPIO_REG(0xb0) |
| #define EP93XX_GPIO_B_INT_ACK EP93XX_GPIO_REG(0xb4) |
| #define EP93XX_GPIO_B_INT_ENABLE EP93XX_GPIO_REG(0xb8) |
| #define EP93XX_GPIO_B_INT_STATUS EP93XX_GPIO_REG(0xbc) |
| |
| #define EP93XX_AAC_BASE (EP93XX_APB_VIRT_BASE + 0x00080000) |
| |
| #define EP93XX_SPI_BASE (EP93XX_APB_VIRT_BASE + 0x000a0000) |
| |
| #define EP93XX_IRDA_BASE (EP93XX_APB_VIRT_BASE + 0x000b0000) |
| |
| #define EP93XX_UART1_BASE (EP93XX_APB_VIRT_BASE + 0x000c0000) |
| #define EP93XX_UART1_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x000c0000) |
| |
| #define EP93XX_UART2_BASE (EP93XX_APB_VIRT_BASE + 0x000d0000) |
| #define EP93XX_UART2_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x000d0000) |
| |
| #define EP93XX_UART3_BASE (EP93XX_APB_VIRT_BASE + 0x000e0000) |
| #define EP93XX_UART3_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x000e0000) |
| |
| #define EP93XX_KEY_MATRIX_BASE (EP93XX_APB_VIRT_BASE + 0x000f0000) |
| |
| #define EP93XX_ADC_BASE (EP93XX_APB_VIRT_BASE + 0x00100000) |
| #define EP93XX_TOUCHSCREEN_BASE (EP93XX_APB_VIRT_BASE + 0x00100000) |
| |
| #define EP93XX_PWM_BASE (EP93XX_APB_VIRT_BASE + 0x00110000) |
| |
| #define EP93XX_RTC_BASE (EP93XX_APB_VIRT_BASE + 0x00120000) |
| |
| #define EP93XX_SYSCON_BASE (EP93XX_APB_VIRT_BASE + 0x00130000) |
| #define EP93XX_SYSCON_REG(x) (EP93XX_SYSCON_BASE + (x)) |
| #define EP93XX_SYSCON_POWER_STATE EP93XX_SYSCON_REG(0x00) |
| #define EP93XX_SYSCON_CLOCK_CONTROL EP93XX_SYSCON_REG(0x04) |
| #define EP93XX_SYSCON_CLOCK_UARTBAUD 0x20000000 |
| #define EP93XX_SYSCON_CLOCK_USH_EN 0x10000000 |
| #define EP93XX_SYSCON_HALT EP93XX_SYSCON_REG(0x08) |
| #define EP93XX_SYSCON_STANDBY EP93XX_SYSCON_REG(0x0c) |
| #define EP93XX_SYSCON_CLOCK_SET1 EP93XX_SYSCON_REG(0x20) |
| #define EP93XX_SYSCON_CLOCK_SET2 EP93XX_SYSCON_REG(0x24) |
| #define EP93XX_SYSCON_DEVICE_CONFIG EP93XX_SYSCON_REG(0x80) |
| #define EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE 0x00800000 |
| #define EP93XX_SYSCON_SWLOCK EP93XX_SYSCON_REG(0xc0) |
| |
| #define EP93XX_WATCHDOG_BASE (EP93XX_APB_VIRT_BASE + 0x00140000) |
| |
| |
| #endif |