| /* |
| * Module for the pnfs nfs4 file layout driver. |
| * Defines all I/O and Policy interface operations, plus code |
| * to register itself with the pNFS client. |
| * |
| * Copyright (c) 2002 |
| * The Regents of the University of Michigan |
| * All Rights Reserved |
| * |
| * Dean Hildebrand <dhildebz@umich.edu> |
| * |
| * Permission is granted to use, copy, create derivative works, and |
| * redistribute this software and such derivative works for any purpose, |
| * so long as the name of the University of Michigan is not used in |
| * any advertising or publicity pertaining to the use or distribution |
| * of this software without specific, written prior authorization. If |
| * the above copyright notice or any other identification of the |
| * University of Michigan is included in any copy of any portion of |
| * this software, then the disclaimer below must also be included. |
| * |
| * This software is provided as is, without representation or warranty |
| * of any kind either express or implied, including without limitation |
| * the implied warranties of merchantability, fitness for a particular |
| * purpose, or noninfringement. The Regents of the University of |
| * Michigan shall not be liable for any damages, including special, |
| * indirect, incidental, or consequential damages, with respect to any |
| * claim arising out of or in connection with the use of the software, |
| * even if it has been or is hereafter advised of the possibility of |
| * such damages. |
| */ |
| |
| #include <linux/nfs_fs.h> |
| |
| #include "internal.h" |
| #include "nfs4filelayout.h" |
| |
| #define NFSDBG_FACILITY NFSDBG_PNFS_LD |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Dean Hildebrand <dhildebz@umich.edu>"); |
| MODULE_DESCRIPTION("The NFSv4 file layout driver"); |
| |
| #define FILELAYOUT_POLL_RETRY_MAX (15*HZ) |
| |
| static loff_t |
| filelayout_get_dense_offset(struct nfs4_filelayout_segment *flseg, |
| loff_t offset) |
| { |
| u32 stripe_width = flseg->stripe_unit * flseg->dsaddr->stripe_count; |
| u64 tmp; |
| |
| offset -= flseg->pattern_offset; |
| tmp = offset; |
| do_div(tmp, stripe_width); |
| |
| return tmp * flseg->stripe_unit + do_div(offset, flseg->stripe_unit); |
| } |
| |
| /* This function is used by the layout driver to calculate the |
| * offset of the file on the dserver based on whether the |
| * layout type is STRIPE_DENSE or STRIPE_SPARSE |
| */ |
| static loff_t |
| filelayout_get_dserver_offset(struct pnfs_layout_segment *lseg, loff_t offset) |
| { |
| struct nfs4_filelayout_segment *flseg = FILELAYOUT_LSEG(lseg); |
| |
| switch (flseg->stripe_type) { |
| case STRIPE_SPARSE: |
| return offset; |
| |
| case STRIPE_DENSE: |
| return filelayout_get_dense_offset(flseg, offset); |
| } |
| |
| BUG(); |
| } |
| |
| /* For data server errors we don't recover from */ |
| static void |
| filelayout_set_lo_fail(struct pnfs_layout_segment *lseg) |
| { |
| if (lseg->pls_range.iomode == IOMODE_RW) { |
| dprintk("%s Setting layout IOMODE_RW fail bit\n", __func__); |
| set_bit(lo_fail_bit(IOMODE_RW), &lseg->pls_layout->plh_flags); |
| } else { |
| dprintk("%s Setting layout IOMODE_READ fail bit\n", __func__); |
| set_bit(lo_fail_bit(IOMODE_READ), &lseg->pls_layout->plh_flags); |
| } |
| } |
| |
| static int filelayout_async_handle_error(struct rpc_task *task, |
| struct nfs4_state *state, |
| struct nfs_client *clp, |
| int *reset) |
| { |
| if (task->tk_status >= 0) |
| return 0; |
| |
| *reset = 0; |
| |
| switch (task->tk_status) { |
| case -NFS4ERR_BADSESSION: |
| case -NFS4ERR_BADSLOT: |
| case -NFS4ERR_BAD_HIGH_SLOT: |
| case -NFS4ERR_DEADSESSION: |
| case -NFS4ERR_CONN_NOT_BOUND_TO_SESSION: |
| case -NFS4ERR_SEQ_FALSE_RETRY: |
| case -NFS4ERR_SEQ_MISORDERED: |
| dprintk("%s ERROR %d, Reset session. Exchangeid " |
| "flags 0x%x\n", __func__, task->tk_status, |
| clp->cl_exchange_flags); |
| nfs4_schedule_session_recovery(clp->cl_session); |
| break; |
| case -NFS4ERR_DELAY: |
| case -NFS4ERR_GRACE: |
| case -EKEYEXPIRED: |
| rpc_delay(task, FILELAYOUT_POLL_RETRY_MAX); |
| break; |
| default: |
| dprintk("%s DS error. Retry through MDS %d\n", __func__, |
| task->tk_status); |
| *reset = 1; |
| break; |
| } |
| task->tk_status = 0; |
| return -EAGAIN; |
| } |
| |
| /* NFS_PROTO call done callback routines */ |
| |
| static int filelayout_read_done_cb(struct rpc_task *task, |
| struct nfs_read_data *data) |
| { |
| struct nfs_client *clp = data->ds_clp; |
| int reset = 0; |
| |
| dprintk("%s DS read\n", __func__); |
| |
| if (filelayout_async_handle_error(task, data->args.context->state, |
| data->ds_clp, &reset) == -EAGAIN) { |
| dprintk("%s calling restart ds_clp %p ds_clp->cl_session %p\n", |
| __func__, data->ds_clp, data->ds_clp->cl_session); |
| if (reset) { |
| filelayout_set_lo_fail(data->lseg); |
| nfs4_reset_read(task, data); |
| clp = NFS_SERVER(data->inode)->nfs_client; |
| } |
| nfs_restart_rpc(task, clp); |
| return -EAGAIN; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Call ops for the async read/write cases |
| * In the case of dense layouts, the offset needs to be reset to its |
| * original value. |
| */ |
| static void filelayout_read_prepare(struct rpc_task *task, void *data) |
| { |
| struct nfs_read_data *rdata = (struct nfs_read_data *)data; |
| |
| rdata->read_done_cb = filelayout_read_done_cb; |
| |
| if (nfs41_setup_sequence(rdata->ds_clp->cl_session, |
| &rdata->args.seq_args, &rdata->res.seq_res, |
| 0, task)) |
| return; |
| |
| rpc_call_start(task); |
| } |
| |
| static void filelayout_read_call_done(struct rpc_task *task, void *data) |
| { |
| struct nfs_read_data *rdata = (struct nfs_read_data *)data; |
| |
| dprintk("--> %s task->tk_status %d\n", __func__, task->tk_status); |
| |
| /* Note this may cause RPC to be resent */ |
| rdata->mds_ops->rpc_call_done(task, data); |
| } |
| |
| static void filelayout_read_release(void *data) |
| { |
| struct nfs_read_data *rdata = (struct nfs_read_data *)data; |
| |
| rdata->mds_ops->rpc_release(data); |
| } |
| |
| static int filelayout_write_done_cb(struct rpc_task *task, |
| struct nfs_write_data *data) |
| { |
| int reset = 0; |
| |
| if (filelayout_async_handle_error(task, data->args.context->state, |
| data->ds_clp, &reset) == -EAGAIN) { |
| struct nfs_client *clp; |
| |
| dprintk("%s calling restart ds_clp %p ds_clp->cl_session %p\n", |
| __func__, data->ds_clp, data->ds_clp->cl_session); |
| if (reset) { |
| filelayout_set_lo_fail(data->lseg); |
| nfs4_reset_write(task, data); |
| clp = NFS_SERVER(data->inode)->nfs_client; |
| } else |
| clp = data->ds_clp; |
| nfs_restart_rpc(task, clp); |
| return -EAGAIN; |
| } |
| |
| return 0; |
| } |
| |
| static void filelayout_write_prepare(struct rpc_task *task, void *data) |
| { |
| struct nfs_write_data *wdata = (struct nfs_write_data *)data; |
| |
| if (nfs41_setup_sequence(wdata->ds_clp->cl_session, |
| &wdata->args.seq_args, &wdata->res.seq_res, |
| 0, task)) |
| return; |
| |
| rpc_call_start(task); |
| } |
| |
| static void filelayout_write_call_done(struct rpc_task *task, void *data) |
| { |
| struct nfs_write_data *wdata = (struct nfs_write_data *)data; |
| |
| /* Note this may cause RPC to be resent */ |
| wdata->mds_ops->rpc_call_done(task, data); |
| } |
| |
| static void filelayout_write_release(void *data) |
| { |
| struct nfs_write_data *wdata = (struct nfs_write_data *)data; |
| |
| wdata->mds_ops->rpc_release(data); |
| } |
| |
| struct rpc_call_ops filelayout_read_call_ops = { |
| .rpc_call_prepare = filelayout_read_prepare, |
| .rpc_call_done = filelayout_read_call_done, |
| .rpc_release = filelayout_read_release, |
| }; |
| |
| struct rpc_call_ops filelayout_write_call_ops = { |
| .rpc_call_prepare = filelayout_write_prepare, |
| .rpc_call_done = filelayout_write_call_done, |
| .rpc_release = filelayout_write_release, |
| }; |
| |
| static enum pnfs_try_status |
| filelayout_read_pagelist(struct nfs_read_data *data) |
| { |
| struct pnfs_layout_segment *lseg = data->lseg; |
| struct nfs4_pnfs_ds *ds; |
| loff_t offset = data->args.offset; |
| u32 j, idx; |
| struct nfs_fh *fh; |
| int status; |
| |
| dprintk("--> %s ino %lu pgbase %u req %Zu@%llu\n", |
| __func__, data->inode->i_ino, |
| data->args.pgbase, (size_t)data->args.count, offset); |
| |
| /* Retrieve the correct rpc_client for the byte range */ |
| j = nfs4_fl_calc_j_index(lseg, offset); |
| idx = nfs4_fl_calc_ds_index(lseg, j); |
| ds = nfs4_fl_prepare_ds(lseg, idx); |
| if (!ds) { |
| /* Either layout fh index faulty, or ds connect failed */ |
| set_bit(lo_fail_bit(IOMODE_RW), &lseg->pls_layout->plh_flags); |
| set_bit(lo_fail_bit(IOMODE_READ), &lseg->pls_layout->plh_flags); |
| return PNFS_NOT_ATTEMPTED; |
| } |
| dprintk("%s USE DS:ip %x %hu\n", __func__, |
| ntohl(ds->ds_ip_addr), ntohs(ds->ds_port)); |
| |
| /* No multipath support. Use first DS */ |
| data->ds_clp = ds->ds_clp; |
| fh = nfs4_fl_select_ds_fh(lseg, j); |
| if (fh) |
| data->args.fh = fh; |
| |
| data->args.offset = filelayout_get_dserver_offset(lseg, offset); |
| data->mds_offset = offset; |
| |
| /* Perform an asynchronous read to ds */ |
| status = nfs_initiate_read(data, ds->ds_clp->cl_rpcclient, |
| &filelayout_read_call_ops); |
| BUG_ON(status != 0); |
| return PNFS_ATTEMPTED; |
| } |
| |
| /* Perform async writes. */ |
| static enum pnfs_try_status |
| filelayout_write_pagelist(struct nfs_write_data *data, int sync) |
| { |
| struct pnfs_layout_segment *lseg = data->lseg; |
| struct nfs4_pnfs_ds *ds; |
| loff_t offset = data->args.offset; |
| u32 j, idx; |
| struct nfs_fh *fh; |
| int status; |
| |
| /* Retrieve the correct rpc_client for the byte range */ |
| j = nfs4_fl_calc_j_index(lseg, offset); |
| idx = nfs4_fl_calc_ds_index(lseg, j); |
| ds = nfs4_fl_prepare_ds(lseg, idx); |
| if (!ds) { |
| printk(KERN_ERR "%s: prepare_ds failed, use MDS\n", __func__); |
| set_bit(lo_fail_bit(IOMODE_RW), &lseg->pls_layout->plh_flags); |
| set_bit(lo_fail_bit(IOMODE_READ), &lseg->pls_layout->plh_flags); |
| return PNFS_NOT_ATTEMPTED; |
| } |
| dprintk("%s ino %lu sync %d req %Zu@%llu DS:%x:%hu\n", __func__, |
| data->inode->i_ino, sync, (size_t) data->args.count, offset, |
| ntohl(ds->ds_ip_addr), ntohs(ds->ds_port)); |
| |
| /* We can't handle commit to ds yet */ |
| if (!FILELAYOUT_LSEG(lseg)->commit_through_mds) |
| data->args.stable = NFS_FILE_SYNC; |
| |
| data->write_done_cb = filelayout_write_done_cb; |
| data->ds_clp = ds->ds_clp; |
| fh = nfs4_fl_select_ds_fh(lseg, j); |
| if (fh) |
| data->args.fh = fh; |
| /* |
| * Get the file offset on the dserver. Set the write offset to |
| * this offset and save the original offset. |
| */ |
| data->args.offset = filelayout_get_dserver_offset(lseg, offset); |
| data->mds_offset = offset; |
| |
| /* Perform an asynchronous write */ |
| status = nfs_initiate_write(data, ds->ds_clp->cl_rpcclient, |
| &filelayout_write_call_ops, sync); |
| BUG_ON(status != 0); |
| return PNFS_ATTEMPTED; |
| } |
| |
| /* |
| * filelayout_check_layout() |
| * |
| * Make sure layout segment parameters are sane WRT the device. |
| * At this point no generic layer initialization of the lseg has occurred, |
| * and nothing has been added to the layout_hdr cache. |
| * |
| */ |
| static int |
| filelayout_check_layout(struct pnfs_layout_hdr *lo, |
| struct nfs4_filelayout_segment *fl, |
| struct nfs4_layoutget_res *lgr, |
| struct nfs4_deviceid *id) |
| { |
| struct nfs4_file_layout_dsaddr *dsaddr; |
| int status = -EINVAL; |
| struct nfs_server *nfss = NFS_SERVER(lo->plh_inode); |
| |
| dprintk("--> %s\n", __func__); |
| |
| if (fl->pattern_offset > lgr->range.offset) { |
| dprintk("%s pattern_offset %lld to large\n", |
| __func__, fl->pattern_offset); |
| goto out; |
| } |
| |
| if (!fl->stripe_unit || fl->stripe_unit % PAGE_SIZE) { |
| dprintk("%s Invalid stripe unit (%u)\n", |
| __func__, fl->stripe_unit); |
| goto out; |
| } |
| |
| /* find and reference the deviceid */ |
| dsaddr = nfs4_fl_find_get_deviceid(id); |
| if (dsaddr == NULL) { |
| dsaddr = get_device_info(lo->plh_inode, id); |
| if (dsaddr == NULL) |
| goto out; |
| } |
| fl->dsaddr = dsaddr; |
| |
| if (fl->first_stripe_index < 0 || |
| fl->first_stripe_index >= dsaddr->stripe_count) { |
| dprintk("%s Bad first_stripe_index %d\n", |
| __func__, fl->first_stripe_index); |
| goto out_put; |
| } |
| |
| if ((fl->stripe_type == STRIPE_SPARSE && |
| fl->num_fh > 1 && fl->num_fh != dsaddr->ds_num) || |
| (fl->stripe_type == STRIPE_DENSE && |
| fl->num_fh != dsaddr->stripe_count)) { |
| dprintk("%s num_fh %u not valid for given packing\n", |
| __func__, fl->num_fh); |
| goto out_put; |
| } |
| |
| if (fl->stripe_unit % nfss->rsize || fl->stripe_unit % nfss->wsize) { |
| dprintk("%s Stripe unit (%u) not aligned with rsize %u " |
| "wsize %u\n", __func__, fl->stripe_unit, nfss->rsize, |
| nfss->wsize); |
| } |
| |
| status = 0; |
| out: |
| dprintk("--> %s returns %d\n", __func__, status); |
| return status; |
| out_put: |
| nfs4_fl_put_deviceid(dsaddr); |
| goto out; |
| } |
| |
| static void filelayout_free_fh_array(struct nfs4_filelayout_segment *fl) |
| { |
| int i; |
| |
| for (i = 0; i < fl->num_fh; i++) { |
| if (!fl->fh_array[i]) |
| break; |
| kfree(fl->fh_array[i]); |
| } |
| kfree(fl->fh_array); |
| fl->fh_array = NULL; |
| } |
| |
| static void |
| _filelayout_free_lseg(struct nfs4_filelayout_segment *fl) |
| { |
| filelayout_free_fh_array(fl); |
| kfree(fl); |
| } |
| |
| static int |
| filelayout_decode_layout(struct pnfs_layout_hdr *flo, |
| struct nfs4_filelayout_segment *fl, |
| struct nfs4_layoutget_res *lgr, |
| struct nfs4_deviceid *id) |
| { |
| uint32_t *p = (uint32_t *)lgr->layout.buf; |
| uint32_t nfl_util; |
| int i; |
| |
| dprintk("%s: set_layout_map Begin\n", __func__); |
| |
| memcpy(id, p, sizeof(*id)); |
| p += XDR_QUADLEN(NFS4_DEVICEID4_SIZE); |
| print_deviceid(id); |
| |
| nfl_util = be32_to_cpup(p++); |
| if (nfl_util & NFL4_UFLG_COMMIT_THRU_MDS) |
| fl->commit_through_mds = 1; |
| if (nfl_util & NFL4_UFLG_DENSE) |
| fl->stripe_type = STRIPE_DENSE; |
| else |
| fl->stripe_type = STRIPE_SPARSE; |
| fl->stripe_unit = nfl_util & ~NFL4_UFLG_MASK; |
| |
| fl->first_stripe_index = be32_to_cpup(p++); |
| p = xdr_decode_hyper(p, &fl->pattern_offset); |
| fl->num_fh = be32_to_cpup(p++); |
| |
| dprintk("%s: nfl_util 0x%X num_fh %u fsi %u po %llu\n", |
| __func__, nfl_util, fl->num_fh, fl->first_stripe_index, |
| fl->pattern_offset); |
| |
| fl->fh_array = kzalloc(fl->num_fh * sizeof(struct nfs_fh *), |
| GFP_KERNEL); |
| if (!fl->fh_array) |
| return -ENOMEM; |
| |
| for (i = 0; i < fl->num_fh; i++) { |
| /* Do we want to use a mempool here? */ |
| fl->fh_array[i] = kmalloc(sizeof(struct nfs_fh), GFP_KERNEL); |
| if (!fl->fh_array[i]) { |
| filelayout_free_fh_array(fl); |
| return -ENOMEM; |
| } |
| fl->fh_array[i]->size = be32_to_cpup(p++); |
| if (sizeof(struct nfs_fh) < fl->fh_array[i]->size) { |
| printk(KERN_ERR "Too big fh %d received %d\n", |
| i, fl->fh_array[i]->size); |
| filelayout_free_fh_array(fl); |
| return -EIO; |
| } |
| memcpy(fl->fh_array[i]->data, p, fl->fh_array[i]->size); |
| p += XDR_QUADLEN(fl->fh_array[i]->size); |
| dprintk("DEBUG: %s: fh len %d\n", __func__, |
| fl->fh_array[i]->size); |
| } |
| |
| return 0; |
| } |
| |
| static struct pnfs_layout_segment * |
| filelayout_alloc_lseg(struct pnfs_layout_hdr *layoutid, |
| struct nfs4_layoutget_res *lgr) |
| { |
| struct nfs4_filelayout_segment *fl; |
| int rc; |
| struct nfs4_deviceid id; |
| |
| dprintk("--> %s\n", __func__); |
| fl = kzalloc(sizeof(*fl), GFP_KERNEL); |
| if (!fl) |
| return NULL; |
| |
| rc = filelayout_decode_layout(layoutid, fl, lgr, &id); |
| if (rc != 0 || filelayout_check_layout(layoutid, fl, lgr, &id)) { |
| _filelayout_free_lseg(fl); |
| return NULL; |
| } |
| return &fl->generic_hdr; |
| } |
| |
| static void |
| filelayout_free_lseg(struct pnfs_layout_segment *lseg) |
| { |
| struct nfs4_filelayout_segment *fl = FILELAYOUT_LSEG(lseg); |
| |
| dprintk("--> %s\n", __func__); |
| nfs4_fl_put_deviceid(fl->dsaddr); |
| _filelayout_free_lseg(fl); |
| } |
| |
| /* |
| * filelayout_pg_test(). Called by nfs_can_coalesce_requests() |
| * |
| * return 1 : coalesce page |
| * return 0 : don't coalesce page |
| */ |
| int |
| filelayout_pg_test(struct nfs_pageio_descriptor *pgio, struct nfs_page *prev, |
| struct nfs_page *req) |
| { |
| u64 p_stripe, r_stripe; |
| u32 stripe_unit; |
| |
| if (!pgio->pg_lseg) |
| return 1; |
| p_stripe = (u64)prev->wb_index << PAGE_CACHE_SHIFT; |
| r_stripe = (u64)req->wb_index << PAGE_CACHE_SHIFT; |
| stripe_unit = FILELAYOUT_LSEG(pgio->pg_lseg)->stripe_unit; |
| |
| do_div(p_stripe, stripe_unit); |
| do_div(r_stripe, stripe_unit); |
| |
| return (p_stripe == r_stripe); |
| } |
| |
| static struct pnfs_layoutdriver_type filelayout_type = { |
| .id = LAYOUT_NFSV4_1_FILES, |
| .name = "LAYOUT_NFSV4_1_FILES", |
| .owner = THIS_MODULE, |
| .alloc_lseg = filelayout_alloc_lseg, |
| .free_lseg = filelayout_free_lseg, |
| .pg_test = filelayout_pg_test, |
| .read_pagelist = filelayout_read_pagelist, |
| .write_pagelist = filelayout_write_pagelist, |
| }; |
| |
| static int __init nfs4filelayout_init(void) |
| { |
| printk(KERN_INFO "%s: NFSv4 File Layout Driver Registering...\n", |
| __func__); |
| return pnfs_register_layoutdriver(&filelayout_type); |
| } |
| |
| static void __exit nfs4filelayout_exit(void) |
| { |
| printk(KERN_INFO "%s: NFSv4 File Layout Driver Unregistering...\n", |
| __func__); |
| pnfs_unregister_layoutdriver(&filelayout_type); |
| } |
| |
| module_init(nfs4filelayout_init); |
| module_exit(nfs4filelayout_exit); |