| /* |
| dstr.c (c) 1997-8 Grant R. Guenther <grant@torque.net> |
| Under the terms of the GNU General Public License. |
| |
| dstr.c is a low-level protocol driver for the |
| DataStor EP2000 parallel to IDE adapter chip. |
| |
| */ |
| |
| /* Changes: |
| |
| 1.01 GRG 1998.05.06 init_proto, release_proto |
| |
| */ |
| |
| #define DSTR_VERSION "1.01" |
| |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/delay.h> |
| #include <linux/kernel.h> |
| #include <linux/types.h> |
| #include <linux/wait.h> |
| #include <asm/io.h> |
| |
| #include "paride.h" |
| |
| /* mode codes: 0 nybble reads, 8-bit writes |
| 1 8-bit reads and writes |
| 2 8-bit EPP mode |
| 3 EPP-16 |
| 4 EPP-32 |
| */ |
| |
| #define j44(a,b) (((a>>3)&0x07)|((~a>>4)&0x08)|((b<<1)&0x70)|((~b)&0x80)) |
| |
| #define P1 w2(5);w2(0xd);w2(5);w2(4); |
| #define P2 w2(5);w2(7);w2(5);w2(4); |
| #define P3 w2(6);w2(4);w2(6);w2(4); |
| |
| /* cont = 0 - access the IDE register file |
| cont = 1 - access the IDE command set |
| */ |
| |
| static int cont_map[2] = { 0x20, 0x40 }; |
| |
| static int dstr_read_regr( PIA *pi, int cont, int regr ) |
| |
| { int a, b, r; |
| |
| r = regr + cont_map[cont]; |
| |
| w0(0x81); P1; |
| if (pi->mode) { w0(0x11); } else { w0(1); } |
| P2; w0(r); P1; |
| |
| switch (pi->mode) { |
| |
| case 0: w2(6); a = r1(); w2(4); w2(6); b = r1(); w2(4); |
| return j44(a,b); |
| |
| case 1: w0(0); w2(0x26); a = r0(); w2(4); |
| return a; |
| |
| case 2: |
| case 3: |
| case 4: w2(0x24); a = r4(); w2(4); |
| return a; |
| |
| } |
| return -1; |
| } |
| |
| static void dstr_write_regr( PIA *pi, int cont, int regr, int val ) |
| |
| { int r; |
| |
| r = regr + cont_map[cont]; |
| |
| w0(0x81); P1; |
| if (pi->mode >= 2) { w0(0x11); } else { w0(1); } |
| P2; w0(r); P1; |
| |
| switch (pi->mode) { |
| |
| case 0: |
| case 1: w0(val); w2(5); w2(7); w2(5); w2(4); |
| break; |
| |
| case 2: |
| case 3: |
| case 4: w4(val); |
| break; |
| } |
| } |
| |
| #define CCP(x) w0(0xff);w2(0xc);w2(4);\ |
| w0(0xaa);w0(0x55);w0(0);w0(0xff);w0(0x87);w0(0x78);\ |
| w0(x);w2(5);w2(4); |
| |
| static void dstr_connect ( PIA *pi ) |
| |
| { pi->saved_r0 = r0(); |
| pi->saved_r2 = r2(); |
| w2(4); CCP(0xe0); w0(0xff); |
| } |
| |
| static void dstr_disconnect ( PIA *pi ) |
| |
| { CCP(0x30); |
| w0(pi->saved_r0); |
| w2(pi->saved_r2); |
| } |
| |
| static void dstr_read_block( PIA *pi, char * buf, int count ) |
| |
| { int k, a, b; |
| |
| w0(0x81); P1; |
| if (pi->mode) { w0(0x19); } else { w0(9); } |
| P2; w0(0x82); P1; P3; w0(0x20); P1; |
| |
| switch (pi->mode) { |
| |
| case 0: for (k=0;k<count;k++) { |
| w2(6); a = r1(); w2(4); |
| w2(6); b = r1(); w2(4); |
| buf[k] = j44(a,b); |
| } |
| break; |
| |
| case 1: w0(0); |
| for (k=0;k<count;k++) { |
| w2(0x26); buf[k] = r0(); w2(0x24); |
| } |
| w2(4); |
| break; |
| |
| case 2: w2(0x24); |
| for (k=0;k<count;k++) buf[k] = r4(); |
| w2(4); |
| break; |
| |
| case 3: w2(0x24); |
| for (k=0;k<count/2;k++) ((u16 *)buf)[k] = r4w(); |
| w2(4); |
| break; |
| |
| case 4: w2(0x24); |
| for (k=0;k<count/4;k++) ((u32 *)buf)[k] = r4l(); |
| w2(4); |
| break; |
| |
| } |
| } |
| |
| static void dstr_write_block( PIA *pi, char * buf, int count ) |
| |
| { int k; |
| |
| w0(0x81); P1; |
| if (pi->mode) { w0(0x19); } else { w0(9); } |
| P2; w0(0x82); P1; P3; w0(0x20); P1; |
| |
| switch (pi->mode) { |
| |
| case 0: |
| case 1: for (k=0;k<count;k++) { |
| w2(5); w0(buf[k]); w2(7); |
| } |
| w2(5); w2(4); |
| break; |
| |
| case 2: w2(0xc5); |
| for (k=0;k<count;k++) w4(buf[k]); |
| w2(0xc4); |
| break; |
| |
| case 3: w2(0xc5); |
| for (k=0;k<count/2;k++) w4w(((u16 *)buf)[k]); |
| w2(0xc4); |
| break; |
| |
| case 4: w2(0xc5); |
| for (k=0;k<count/4;k++) w4l(((u32 *)buf)[k]); |
| w2(0xc4); |
| break; |
| |
| } |
| } |
| |
| |
| static void dstr_log_adapter( PIA *pi, char * scratch, int verbose ) |
| |
| { char *mode_string[5] = {"4-bit","8-bit","EPP-8", |
| "EPP-16","EPP-32"}; |
| |
| printk("%s: dstr %s, DataStor EP2000 at 0x%x, ", |
| pi->device,DSTR_VERSION,pi->port); |
| printk("mode %d (%s), delay %d\n",pi->mode, |
| mode_string[pi->mode],pi->delay); |
| |
| } |
| |
| static struct pi_protocol dstr = { |
| .owner = THIS_MODULE, |
| .name = "dstr", |
| .max_mode = 5, |
| .epp_first = 2, |
| .default_delay = 1, |
| .max_units = 1, |
| .write_regr = dstr_write_regr, |
| .read_regr = dstr_read_regr, |
| .write_block = dstr_write_block, |
| .read_block = dstr_read_block, |
| .connect = dstr_connect, |
| .disconnect = dstr_disconnect, |
| .log_adapter = dstr_log_adapter, |
| }; |
| |
| static int __init dstr_init(void) |
| { |
| return pi_register(&dstr)-1; |
| } |
| |
| static void __exit dstr_exit(void) |
| { |
| pi_unregister(&dstr); |
| } |
| |
| MODULE_LICENSE("GPL"); |
| module_init(dstr_init) |
| module_exit(dstr_exit) |