blob: 146f607e9c44addc0e5cbb3856b2763cadd46173 [file] [log] [blame]
/*
* (C) 2001-2004 Dave Jones. <davej@codemonkey.org.uk>
* (C) 2002 Padraig Brady. <padraig@antefacto.com>
*
* Licensed under the terms of the GNU GPL License version 2.
* Based upon datasheets & sample CPUs kindly provided by VIA.
*
* VIA have currently 3 different versions of Longhaul.
* Version 1 (Longhaul) uses the BCR2 MSR at 0x1147.
* It is present only in Samuel 1 (C5A), Samuel 2 (C5B) stepping 0.
* Version 2 of longhaul is the same as v1, but adds voltage scaling.
* Present in Samuel 2 (steppings 1-7 only) (C5B), and Ezra (C5C)
* voltage scaling support has currently been disabled in this driver
* until we have code that gets it right.
* Version 3 of longhaul got renamed to Powersaver and redesigned
* to use the POWERSAVER MSR at 0x110a.
* It is present in Ezra-T (C5M), Nehemiah (C5X) and above.
* It's pretty much the same feature wise to longhaul v2, though
* there is provision for scaling FSB too, but this doesn't work
* too well in practice so we don't even try to use this.
*
* BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous*
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/cpufreq.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/pci.h>
#include <asm/msr.h>
#include <asm/timex.h>
#include <asm/io.h>
#include "longhaul.h"
#define PFX "longhaul: "
#define TYPE_LONGHAUL_V1 1
#define TYPE_LONGHAUL_V2 2
#define TYPE_POWERSAVER 3
#define CPU_SAMUEL 1
#define CPU_SAMUEL2 2
#define CPU_EZRA 3
#define CPU_EZRA_T 4
#define CPU_NEHEMIAH 5
static int cpu_model;
static unsigned int numscales=16, numvscales;
static unsigned int fsb;
static int minvid, maxvid;
static unsigned int minmult, maxmult;
static int can_scale_voltage;
static int vrmrev;
/* Module parameters */
static int dont_scale_voltage;
#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "longhaul", msg)
/* Clock ratios multiplied by 10 */
static int clock_ratio[32];
static int eblcr_table[32];
static int voltage_table[32];
static unsigned int highest_speed, lowest_speed; /* kHz */
static int longhaul_version;
static struct cpufreq_frequency_table *longhaul_table;
#ifdef CONFIG_CPU_FREQ_DEBUG
static char speedbuffer[8];
static char *print_speed(int speed)
{
if (speed < 1000) {
snprintf(speedbuffer, sizeof(speedbuffer),"%dMHz", speed);
return speedbuffer;
}
if (speed%1000 == 0)
snprintf(speedbuffer, sizeof(speedbuffer),
"%dGHz", speed/1000);
else
snprintf(speedbuffer, sizeof(speedbuffer),
"%d.%dGHz", speed/1000, (speed%1000)/100);
return speedbuffer;
}
#endif
static unsigned int calc_speed(int mult)
{
int khz;
khz = (mult/10)*fsb;
if (mult%10)
khz += fsb/2;
khz *= 1000;
return khz;
}
static int longhaul_get_cpu_mult(void)
{
unsigned long invalue=0,lo, hi;
rdmsr (MSR_IA32_EBL_CR_POWERON, lo, hi);
invalue = (lo & (1<<22|1<<23|1<<24|1<<25)) >>22;
if (longhaul_version==TYPE_LONGHAUL_V2 || longhaul_version==TYPE_POWERSAVER) {
if (lo & (1<<27))
invalue+=16;
}
return eblcr_table[invalue];
}
static void do_powersaver(union msr_longhaul *longhaul,
unsigned int clock_ratio_index)
{
struct pci_dev *dev;
unsigned long flags;
unsigned int tmp_mask;
int version;
int i;
u16 pci_cmd;
u16 cmd_state[64];
switch (cpu_model) {
case CPU_EZRA_T:
version = 3;
break;
case CPU_NEHEMIAH:
version = 0xf;
break;
default:
return;
}
rdmsrl(MSR_VIA_LONGHAUL, longhaul->val);
longhaul->bits.SoftBusRatio = clock_ratio_index & 0xf;
longhaul->bits.SoftBusRatio4 = (clock_ratio_index & 0x10) >> 4;
longhaul->bits.EnableSoftBusRatio = 1;
longhaul->bits.RevisionKey = 0;
preempt_disable();
local_irq_save(flags);
/*
* get current pci bus master state for all devices
* and clear bus master bit
*/
dev = NULL;
i = 0;
do {
dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev);
if (dev != NULL) {
pci_read_config_word(dev, PCI_COMMAND, &pci_cmd);
cmd_state[i++] = pci_cmd;
pci_cmd &= ~PCI_COMMAND_MASTER;
pci_write_config_word(dev, PCI_COMMAND, pci_cmd);
}
} while (dev != NULL);
tmp_mask=inb(0x21); /* works on C3. save mask. */
outb(0xFE,0x21); /* TMR0 only */
outb(0xFF,0x80); /* delay */
safe_halt();
wrmsrl(MSR_VIA_LONGHAUL, longhaul->val);
halt();
local_irq_disable();
outb(tmp_mask,0x21); /* restore mask */
/* restore pci bus master state for all devices */
dev = NULL;
i = 0;
do {
dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev);
if (dev != NULL) {
pci_cmd = cmd_state[i++];
pci_write_config_byte(dev, PCI_COMMAND, pci_cmd);
}
} while (dev != NULL);
local_irq_restore(flags);
preempt_enable();
/* disable bus ratio bit */
rdmsrl(MSR_VIA_LONGHAUL, longhaul->val);
longhaul->bits.EnableSoftBusRatio = 0;
longhaul->bits.RevisionKey = version;
wrmsrl(MSR_VIA_LONGHAUL, longhaul->val);
}
/**
* longhaul_set_cpu_frequency()
* @clock_ratio_index : bitpattern of the new multiplier.
*
* Sets a new clock ratio.
*/
static void longhaul_setstate(unsigned int clock_ratio_index)
{
int speed, mult;
struct cpufreq_freqs freqs;
union msr_longhaul longhaul;
union msr_bcr2 bcr2;
static unsigned int old_ratio=-1;
if (old_ratio == clock_ratio_index)
return;
old_ratio = clock_ratio_index;
mult = clock_ratio[clock_ratio_index];
if (mult == -1)
return;
speed = calc_speed(mult);
if ((speed > highest_speed) || (speed < lowest_speed))
return;
freqs.old = calc_speed(longhaul_get_cpu_mult());
freqs.new = speed;
freqs.cpu = 0; /* longhaul.c is UP only driver */
cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
dprintk ("Setting to FSB:%dMHz Mult:%d.%dx (%s)\n",
fsb, mult/10, mult%10, print_speed(speed/1000));
switch (longhaul_version) {
/*
* Longhaul v1. (Samuel[C5A] and Samuel2 stepping 0[C5B])
* Software controlled multipliers only.
*
* *NB* Until we get voltage scaling working v1 & v2 are the same code.
* Longhaul v2 appears in Samuel2 Steppings 1->7 [C5b] and Ezra [C5C]
*/
case TYPE_LONGHAUL_V1:
case TYPE_LONGHAUL_V2:
rdmsrl (MSR_VIA_BCR2, bcr2.val);
/* Enable software clock multiplier */
bcr2.bits.ESOFTBF = 1;
bcr2.bits.CLOCKMUL = clock_ratio_index;
local_irq_disable();
wrmsrl (MSR_VIA_BCR2, bcr2.val);
safe_halt();
/* Disable software clock multiplier */
rdmsrl (MSR_VIA_BCR2, bcr2.val);
bcr2.bits.ESOFTBF = 0;
local_irq_disable();
wrmsrl (MSR_VIA_BCR2, bcr2.val);
local_irq_enable();
break;
/*
* Longhaul v3 (aka Powersaver). (Ezra-T [C5M] & Nehemiah [C5N])
* We can scale voltage with this too, but that's currently
* disabled until we come up with a decent 'match freq to voltage'
* algorithm.
* When we add voltage scaling, we will also need to do the
* voltage/freq setting in order depending on the direction
* of scaling (like we do in powernow-k7.c)
* Nehemiah can do FSB scaling too, but this has never been proven
* to work in practice.
*/
case TYPE_POWERSAVER:
do_powersaver(&longhaul, clock_ratio_index);
break;
}
cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
}
/*
* Centaur decided to make life a little more tricky.
* Only longhaul v1 is allowed to read EBLCR BSEL[0:1].
* Samuel2 and above have to try and guess what the FSB is.
* We do this by assuming we booted at maximum multiplier, and interpolate
* between that value multiplied by possible FSBs and cpu_mhz which
* was calculated at boot time. Really ugly, but no other way to do this.
*/
#define ROUNDING 0xf
static int _guess(int guess)
{
int target;
target = ((maxmult/10)*guess);
if (maxmult%10 != 0)
target += (guess/2);
target += ROUNDING/2;
target &= ~ROUNDING;
return target;
}
static int guess_fsb(void)
{
int speed = (cpu_khz/1000);
int i;
int speeds[3] = { 66, 100, 133 };
speed += ROUNDING/2;
speed &= ~ROUNDING;
for (i=0; i<3; i++) {
if (_guess(speeds[i]) == speed)
return speeds[i];
}
return 0;
}
static int __init longhaul_get_ranges(void)
{
unsigned long invalue;
unsigned int multipliers[32]= {
50,30,40,100,55,35,45,95,90,70,80,60,120,75,85,65,
-1,110,120,-1,135,115,125,105,130,150,160,140,-1,155,-1,145 };
unsigned int j, k = 0;
union msr_longhaul longhaul;
unsigned long lo, hi;
unsigned int eblcr_fsb_table_v1[] = { 66, 133, 100, -1 };
unsigned int eblcr_fsb_table_v2[] = { 133, 100, -1, 66 };
switch (longhaul_version) {
case TYPE_LONGHAUL_V1:
case TYPE_LONGHAUL_V2:
/* Ugh, Longhaul v1 didn't have the min/max MSRs.
Assume min=3.0x & max = whatever we booted at. */
minmult = 30;
maxmult = longhaul_get_cpu_mult();
rdmsr (MSR_IA32_EBL_CR_POWERON, lo, hi);
invalue = (lo & (1<<18|1<<19)) >>18;
if (cpu_model==CPU_SAMUEL || cpu_model==CPU_SAMUEL2)
fsb = eblcr_fsb_table_v1[invalue];
else
fsb = guess_fsb();
break;
case TYPE_POWERSAVER:
/* Ezra-T */
if (cpu_model==CPU_EZRA_T) {
rdmsrl (MSR_VIA_LONGHAUL, longhaul.val);
invalue = longhaul.bits.MaxMHzBR;
if (longhaul.bits.MaxMHzBR4)
invalue += 16;
maxmult=multipliers[invalue];
invalue = longhaul.bits.MinMHzBR;
if (longhaul.bits.MinMHzBR4 == 1)
minmult = 30;
else
minmult = multipliers[invalue];
fsb = eblcr_fsb_table_v2[longhaul.bits.MaxMHzFSB];
break;
}
/* Nehemiah */
if (cpu_model==CPU_NEHEMIAH) {
rdmsrl (MSR_VIA_LONGHAUL, longhaul.val);
/*
* TODO: This code works, but raises a lot of questions.
* - Some Nehemiah's seem to have broken Min/MaxMHzBR's.
* We get around this by using a hardcoded multiplier of 4.0x
* for the minimimum speed, and the speed we booted up at for the max.
* This is done in longhaul_get_cpu_mult() by reading the EBLCR register.
* - According to some VIA documentation EBLCR is only
* in pre-Nehemiah C3s. How this still works is a mystery.
* We're possibly using something undocumented and unsupported,
* But it works, so we don't grumble.
*/
minmult=40;
maxmult=longhaul_get_cpu_mult();
/* Starting with the 1.2GHz parts, theres a 200MHz bus. */
if ((cpu_khz/1000) > 1200)
fsb = 200;
else
fsb = eblcr_fsb_table_v2[longhaul.bits.MaxMHzFSB];
break;
}
}
dprintk ("MinMult:%d.%dx MaxMult:%d.%dx\n",
minmult/10, minmult%10, maxmult/10, maxmult%10);
if (fsb == -1) {
printk (KERN_INFO PFX "Invalid (reserved) FSB!\n");
return -EINVAL;
}
highest_speed = calc_speed(maxmult);
lowest_speed = calc_speed(minmult);
dprintk ("FSB:%dMHz Lowest speed: %s Highest speed:%s\n", fsb,
print_speed(lowest_speed/1000),
print_speed(highest_speed/1000));
if (lowest_speed == highest_speed) {
printk (KERN_INFO PFX "highestspeed == lowest, aborting.\n");
return -EINVAL;
}
if (lowest_speed > highest_speed) {
printk (KERN_INFO PFX "nonsense! lowest (%d > %d) !\n",
lowest_speed, highest_speed);
return -EINVAL;
}
longhaul_table = kmalloc((numscales + 1) * sizeof(struct cpufreq_frequency_table), GFP_KERNEL);
if(!longhaul_table)
return -ENOMEM;
for (j=0; j < numscales; j++) {
unsigned int ratio;
ratio = clock_ratio[j];
if (ratio == -1)
continue;
if (ratio > maxmult || ratio < minmult)
continue;
longhaul_table[k].frequency = calc_speed(ratio);
longhaul_table[k].index = j;
k++;
}
longhaul_table[k].frequency = CPUFREQ_TABLE_END;
if (!k) {
kfree (longhaul_table);
return -EINVAL;
}
return 0;
}
static void __init longhaul_setup_voltagescaling(void)
{
union msr_longhaul longhaul;
rdmsrl (MSR_VIA_LONGHAUL, longhaul.val);
if (!(longhaul.bits.RevisionID & 1))
return;
minvid = longhaul.bits.MinimumVID;
maxvid = longhaul.bits.MaximumVID;
vrmrev = longhaul.bits.VRMRev;
if (minvid == 0 || maxvid == 0) {
printk (KERN_INFO PFX "Bogus values Min:%d.%03d Max:%d.%03d. "
"Voltage scaling disabled.\n",
minvid/1000, minvid%1000, maxvid/1000, maxvid%1000);
return;
}
if (minvid == maxvid) {
printk (KERN_INFO PFX "Claims to support voltage scaling but min & max are "
"both %d.%03d. Voltage scaling disabled\n",
maxvid/1000, maxvid%1000);
return;
}
if (vrmrev==0) {
dprintk ("VRM 8.5\n");
memcpy (voltage_table, vrm85scales, sizeof(voltage_table));
numvscales = (voltage_table[maxvid]-voltage_table[minvid])/25;
} else {
dprintk ("Mobile VRM\n");
memcpy (voltage_table, mobilevrmscales, sizeof(voltage_table));
numvscales = (voltage_table[maxvid]-voltage_table[minvid])/5;
}
/* Current voltage isn't readable at first, so we need to
set it to a known value. The spec says to use maxvid */
longhaul.bits.RevisionKey = longhaul.bits.RevisionID; /* FIXME: This is bad. */
longhaul.bits.EnableSoftVID = 1;
longhaul.bits.SoftVID = maxvid;
wrmsrl (MSR_VIA_LONGHAUL, longhaul.val);
minvid = voltage_table[minvid];
maxvid = voltage_table[maxvid];
dprintk ("Min VID=%d.%03d Max VID=%d.%03d, %d possible voltage scales\n",
maxvid/1000, maxvid%1000, minvid/1000, minvid%1000, numvscales);
can_scale_voltage = 1;
}
static int longhaul_verify(struct cpufreq_policy *policy)
{
return cpufreq_frequency_table_verify(policy, longhaul_table);
}
static int longhaul_target(struct cpufreq_policy *policy,
unsigned int target_freq, unsigned int relation)
{
unsigned int table_index = 0;
unsigned int new_clock_ratio = 0;
if (cpufreq_frequency_table_target(policy, longhaul_table, target_freq, relation, &table_index))
return -EINVAL;
new_clock_ratio = longhaul_table[table_index].index & 0xFF;
longhaul_setstate(new_clock_ratio);
return 0;
}
static unsigned int longhaul_get(unsigned int cpu)
{
if (cpu)
return 0;
return calc_speed(longhaul_get_cpu_mult());
}
static int __init longhaul_cpu_init(struct cpufreq_policy *policy)
{
struct cpuinfo_x86 *c = cpu_data;
char *cpuname=NULL;
int ret;
switch (c->x86_model) {
case 6:
cpu_model = CPU_SAMUEL;
cpuname = "C3 'Samuel' [C5A]";
longhaul_version = TYPE_LONGHAUL_V1;
memcpy (clock_ratio, samuel1_clock_ratio, sizeof(samuel1_clock_ratio));
memcpy (eblcr_table, samuel1_eblcr, sizeof(samuel1_eblcr));
break;
case 7:
longhaul_version = TYPE_LONGHAUL_V1;
switch (c->x86_mask) {
case 0:
cpu_model = CPU_SAMUEL2;
cpuname = "C3 'Samuel 2' [C5B]";
/* Note, this is not a typo, early Samuel2's had Samuel1 ratios. */
memcpy (clock_ratio, samuel1_clock_ratio, sizeof(samuel1_clock_ratio));
memcpy (eblcr_table, samuel2_eblcr, sizeof(samuel2_eblcr));
break;
case 1 ... 15:
if (c->x86_mask < 8) {
cpu_model = CPU_SAMUEL2;
cpuname = "C3 'Samuel 2' [C5B]";
} else {
cpu_model = CPU_EZRA;
cpuname = "C3 'Ezra' [C5C]";
}
memcpy (clock_ratio, ezra_clock_ratio, sizeof(ezra_clock_ratio));
memcpy (eblcr_table, ezra_eblcr, sizeof(ezra_eblcr));
break;
}
break;
case 8:
cpu_model = CPU_EZRA_T;
cpuname = "C3 'Ezra-T' [C5M]";
longhaul_version = TYPE_POWERSAVER;
numscales=32;
memcpy (clock_ratio, ezrat_clock_ratio, sizeof(ezrat_clock_ratio));
memcpy (eblcr_table, ezrat_eblcr, sizeof(ezrat_eblcr));
break;
case 9:
cpu_model = CPU_NEHEMIAH;
longhaul_version = TYPE_POWERSAVER;
numscales=32;
switch (c->x86_mask) {
case 0 ... 1:
cpuname = "C3 'Nehemiah A' [C5N]";
memcpy (clock_ratio, nehemiah_a_clock_ratio, sizeof(nehemiah_a_clock_ratio));
memcpy (eblcr_table, nehemiah_a_eblcr, sizeof(nehemiah_a_eblcr));
break;
case 2 ... 4:
cpuname = "C3 'Nehemiah B' [C5N]";
memcpy (clock_ratio, nehemiah_b_clock_ratio, sizeof(nehemiah_b_clock_ratio));
memcpy (eblcr_table, nehemiah_b_eblcr, sizeof(nehemiah_b_eblcr));
break;
case 5 ... 15:
cpuname = "C3 'Nehemiah C' [C5N]";
memcpy (clock_ratio, nehemiah_c_clock_ratio, sizeof(nehemiah_c_clock_ratio));
memcpy (eblcr_table, nehemiah_c_eblcr, sizeof(nehemiah_c_eblcr));
break;
}
break;
default:
cpuname = "Unknown";
break;
}
printk (KERN_INFO PFX "VIA %s CPU detected. ", cpuname);
switch (longhaul_version) {
case TYPE_LONGHAUL_V1:
case TYPE_LONGHAUL_V2:
printk ("Longhaul v%d supported.\n", longhaul_version);
break;
case TYPE_POWERSAVER:
printk ("Powersaver supported.\n");
break;
};
ret = longhaul_get_ranges();
if (ret != 0)
return ret;
if ((longhaul_version==TYPE_LONGHAUL_V2 || longhaul_version==TYPE_POWERSAVER) &&
(dont_scale_voltage==0))
longhaul_setup_voltagescaling();
policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
policy->cpuinfo.transition_latency = 200000; /* nsec */
policy->cur = calc_speed(longhaul_get_cpu_mult());
ret = cpufreq_frequency_table_cpuinfo(policy, longhaul_table);
if (ret)
return ret;
cpufreq_frequency_table_get_attr(longhaul_table, policy->cpu);
return 0;
}
static int __devexit longhaul_cpu_exit(struct cpufreq_policy *policy)
{
cpufreq_frequency_table_put_attr(policy->cpu);
return 0;
}
static struct freq_attr* longhaul_attr[] = {
&cpufreq_freq_attr_scaling_available_freqs,
NULL,
};
static struct cpufreq_driver longhaul_driver = {
.verify = longhaul_verify,
.target = longhaul_target,
.get = longhaul_get,
.init = longhaul_cpu_init,
.exit = __devexit_p(longhaul_cpu_exit),
.name = "longhaul",
.owner = THIS_MODULE,
.attr = longhaul_attr,
};
static int __init longhaul_init(void)
{
struct cpuinfo_x86 *c = cpu_data;
if (c->x86_vendor != X86_VENDOR_CENTAUR || c->x86 != 6)
return -ENODEV;
switch (c->x86_model) {
case 6 ... 9:
return cpufreq_register_driver(&longhaul_driver);
default:
printk (KERN_INFO PFX "Unknown VIA CPU. Contact davej@codemonkey.org.uk\n");
}
return -ENODEV;
}
static void __exit longhaul_exit(void)
{
int i;
for (i=0; i < numscales; i++) {
if (clock_ratio[i] == maxmult) {
longhaul_setstate(i);
break;
}
}
cpufreq_unregister_driver(&longhaul_driver);
kfree(longhaul_table);
}
module_param (dont_scale_voltage, int, 0644);
MODULE_PARM_DESC(dont_scale_voltage, "Don't scale voltage of processor");
MODULE_AUTHOR ("Dave Jones <davej@codemonkey.org.uk>");
MODULE_DESCRIPTION ("Longhaul driver for VIA Cyrix processors.");
MODULE_LICENSE ("GPL");
module_init(longhaul_init);
module_exit(longhaul_exit);