| /* |
| * intel TCO Watchdog Driver (Used in i82801 and i6300ESB chipsets) |
| * |
| * (c) Copyright 2006-2007 Wim Van Sebroeck <wim@iguana.be>. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| * |
| * Neither Wim Van Sebroeck nor Iguana vzw. admit liability nor |
| * provide warranty for any of this software. This material is |
| * provided "AS-IS" and at no charge. |
| * |
| * The TCO watchdog is implemented in the following I/O controller hubs: |
| * (See the intel documentation on http://developer.intel.com.) |
| * 82801AA (ICH) : document number 290655-003, 290677-014, |
| * 82801AB (ICHO) : document number 290655-003, 290677-014, |
| * 82801BA (ICH2) : document number 290687-002, 298242-027, |
| * 82801BAM (ICH2-M) : document number 290687-002, 298242-027, |
| * 82801CA (ICH3-S) : document number 290733-003, 290739-013, |
| * 82801CAM (ICH3-M) : document number 290716-001, 290718-007, |
| * 82801DB (ICH4) : document number 290744-001, 290745-020, |
| * 82801DBM (ICH4-M) : document number 252337-001, 252663-005, |
| * 82801E (C-ICH) : document number 273599-001, 273645-002, |
| * 82801EB (ICH5) : document number 252516-001, 252517-003, |
| * 82801ER (ICH5R) : document number 252516-001, 252517-003, |
| * 82801FB (ICH6) : document number 301473-002, 301474-007, |
| * 82801FR (ICH6R) : document number 301473-002, 301474-007, |
| * 82801FBM (ICH6-M) : document number 301473-002, 301474-007, |
| * 82801FW (ICH6W) : document number 301473-001, 301474-007, |
| * 82801FRW (ICH6RW) : document number 301473-001, 301474-007, |
| * 82801GB (ICH7) : document number 307013-002, 307014-009, |
| * 82801GR (ICH7R) : document number 307013-002, 307014-009, |
| * 82801GDH (ICH7DH) : document number 307013-002, 307014-009, |
| * 82801GBM (ICH7-M) : document number 307013-002, 307014-009, |
| * 82801GHM (ICH7-M DH) : document number 307013-002, 307014-009, |
| * 82801HB (ICH8) : document number 313056-002, 313057-004, |
| * 82801HR (ICH8R) : document number 313056-002, 313057-004, |
| * 82801HH (ICH8DH) : document number 313056-002, 313057-004, |
| * 82801HO (ICH8DO) : document number 313056-002, 313057-004, |
| * 82801IB (ICH9) : document number 316972-001, 316973-001, |
| * 82801IR (ICH9R) : document number 316972-001, 316973-001, |
| * 82801IH (ICH9DH) : document number 316972-001, 316973-001, |
| * 6300ESB (6300ESB) : document number 300641-003, 300884-010, |
| * 631xESB (631xESB) : document number 313082-001, 313075-005, |
| * 632xESB (632xESB) : document number 313082-001, 313075-005 |
| */ |
| |
| /* |
| * Includes, defines, variables, module parameters, ... |
| */ |
| |
| /* Module and version information */ |
| #define DRV_NAME "iTCO_wdt" |
| #define DRV_VERSION "1.02" |
| #define DRV_RELDATE "26-Jul-2007" |
| #define PFX DRV_NAME ": " |
| |
| /* Includes */ |
| #include <linux/module.h> /* For module specific items */ |
| #include <linux/moduleparam.h> /* For new moduleparam's */ |
| #include <linux/types.h> /* For standard types (like size_t) */ |
| #include <linux/errno.h> /* For the -ENODEV/... values */ |
| #include <linux/kernel.h> /* For printk/panic/... */ |
| #include <linux/miscdevice.h> /* For MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR) */ |
| #include <linux/watchdog.h> /* For the watchdog specific items */ |
| #include <linux/init.h> /* For __init/__exit/... */ |
| #include <linux/fs.h> /* For file operations */ |
| #include <linux/platform_device.h> /* For platform_driver framework */ |
| #include <linux/pci.h> /* For pci functions */ |
| #include <linux/ioport.h> /* For io-port access */ |
| #include <linux/spinlock.h> /* For spin_lock/spin_unlock/... */ |
| |
| #include <asm/uaccess.h> /* For copy_to_user/put_user/... */ |
| #include <asm/io.h> /* For inb/outb/... */ |
| |
| /* TCO related info */ |
| enum iTCO_chipsets { |
| TCO_ICH = 0, /* ICH */ |
| TCO_ICH0, /* ICH0 */ |
| TCO_ICH2, /* ICH2 */ |
| TCO_ICH2M, /* ICH2-M */ |
| TCO_ICH3, /* ICH3-S */ |
| TCO_ICH3M, /* ICH3-M */ |
| TCO_ICH4, /* ICH4 */ |
| TCO_ICH4M, /* ICH4-M */ |
| TCO_CICH, /* C-ICH */ |
| TCO_ICH5, /* ICH5 & ICH5R */ |
| TCO_6300ESB, /* 6300ESB */ |
| TCO_ICH6, /* ICH6 & ICH6R */ |
| TCO_ICH6M, /* ICH6-M */ |
| TCO_ICH6W, /* ICH6W & ICH6RW */ |
| TCO_ICH7, /* ICH7 & ICH7R */ |
| TCO_ICH7M, /* ICH7-M */ |
| TCO_ICH7MDH, /* ICH7-M DH */ |
| TCO_ICH8, /* ICH8 & ICH8R */ |
| TCO_ICH8DH, /* ICH8DH */ |
| TCO_ICH8DO, /* ICH8DO */ |
| TCO_ICH9, /* ICH9 */ |
| TCO_ICH9R, /* ICH9R */ |
| TCO_ICH9DH, /* ICH9DH */ |
| TCO_631XESB, /* 631xESB/632xESB */ |
| }; |
| |
| static struct { |
| char *name; |
| unsigned int iTCO_version; |
| } iTCO_chipset_info[] __devinitdata = { |
| {"ICH", 1}, |
| {"ICH0", 1}, |
| {"ICH2", 1}, |
| {"ICH2-M", 1}, |
| {"ICH3-S", 1}, |
| {"ICH3-M", 1}, |
| {"ICH4", 1}, |
| {"ICH4-M", 1}, |
| {"C-ICH", 1}, |
| {"ICH5 or ICH5R", 1}, |
| {"6300ESB", 1}, |
| {"ICH6 or ICH6R", 2}, |
| {"ICH6-M", 2}, |
| {"ICH6W or ICH6RW", 2}, |
| {"ICH7 or ICH7R", 2}, |
| {"ICH7-M", 2}, |
| {"ICH7-M DH", 2}, |
| {"ICH8 or ICH8R", 2}, |
| {"ICH8DH", 2}, |
| {"ICH8DO", 2}, |
| {"ICH9", 2}, |
| {"ICH9R", 2}, |
| {"ICH9DH", 2}, |
| {"631xESB/632xESB", 2}, |
| {NULL,0} |
| }; |
| |
| /* |
| * This data only exists for exporting the supported PCI ids |
| * via MODULE_DEVICE_TABLE. We do not actually register a |
| * pci_driver, because the I/O Controller Hub has also other |
| * functions that probably will be registered by other drivers. |
| */ |
| static struct pci_device_id iTCO_wdt_pci_tbl[] = { |
| { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH }, |
| { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AB_0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH0 }, |
| { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH2 }, |
| { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_10, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH2M }, |
| { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH3 }, |
| { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH3M }, |
| { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH4 }, |
| { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH4M }, |
| { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801E_0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_CICH }, |
| { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH5 }, |
| { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_6300ESB }, |
| { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH6 }, |
| { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH6M }, |
| { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH6W }, |
| { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH7 }, |
| { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH7M }, |
| { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_31, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH7MDH }, |
| { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH8 }, |
| { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH8DH }, |
| { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_3, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH8DO }, |
| { PCI_VENDOR_ID_INTEL, 0x2918, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH9 }, |
| { PCI_VENDOR_ID_INTEL, 0x2916, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH9R }, |
| { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH9DH }, |
| { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_631XESB }, |
| { PCI_VENDOR_ID_INTEL, 0x2671, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_631XESB }, |
| { PCI_VENDOR_ID_INTEL, 0x2672, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_631XESB }, |
| { PCI_VENDOR_ID_INTEL, 0x2673, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_631XESB }, |
| { PCI_VENDOR_ID_INTEL, 0x2674, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_631XESB }, |
| { PCI_VENDOR_ID_INTEL, 0x2675, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_631XESB }, |
| { PCI_VENDOR_ID_INTEL, 0x2676, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_631XESB }, |
| { PCI_VENDOR_ID_INTEL, 0x2677, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_631XESB }, |
| { PCI_VENDOR_ID_INTEL, 0x2678, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_631XESB }, |
| { PCI_VENDOR_ID_INTEL, 0x2679, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_631XESB }, |
| { PCI_VENDOR_ID_INTEL, 0x267a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_631XESB }, |
| { PCI_VENDOR_ID_INTEL, 0x267b, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_631XESB }, |
| { PCI_VENDOR_ID_INTEL, 0x267c, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_631XESB }, |
| { PCI_VENDOR_ID_INTEL, 0x267d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_631XESB }, |
| { PCI_VENDOR_ID_INTEL, 0x267e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_631XESB }, |
| { PCI_VENDOR_ID_INTEL, 0x267f, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_631XESB }, |
| { 0, }, /* End of list */ |
| }; |
| MODULE_DEVICE_TABLE (pci, iTCO_wdt_pci_tbl); |
| |
| /* Address definitions for the TCO */ |
| #define TCOBASE iTCO_wdt_private.ACPIBASE + 0x60 /* TCO base address */ |
| #define SMI_EN iTCO_wdt_private.ACPIBASE + 0x30 /* SMI Control and Enable Register */ |
| |
| #define TCO_RLD TCOBASE + 0x00 /* TCO Timer Reload and Current Value */ |
| #define TCOv1_TMR TCOBASE + 0x01 /* TCOv1 Timer Initial Value */ |
| #define TCO_DAT_IN TCOBASE + 0x02 /* TCO Data In Register */ |
| #define TCO_DAT_OUT TCOBASE + 0x03 /* TCO Data Out Register */ |
| #define TCO1_STS TCOBASE + 0x04 /* TCO1 Status Register */ |
| #define TCO2_STS TCOBASE + 0x06 /* TCO2 Status Register */ |
| #define TCO1_CNT TCOBASE + 0x08 /* TCO1 Control Register */ |
| #define TCO2_CNT TCOBASE + 0x0a /* TCO2 Control Register */ |
| #define TCOv2_TMR TCOBASE + 0x12 /* TCOv2 Timer Initial Value */ |
| |
| /* internal variables */ |
| static unsigned long is_active; |
| static char expect_release; |
| static struct { /* this is private data for the iTCO_wdt device */ |
| unsigned int iTCO_version; /* TCO version/generation */ |
| unsigned long ACPIBASE; /* The cards ACPIBASE address (TCOBASE = ACPIBASE+0x60) */ |
| unsigned long __iomem *gcs; /* NO_REBOOT flag is Memory-Mapped GCS register bit 5 (TCO version 2) */ |
| spinlock_t io_lock; /* the lock for io operations */ |
| struct pci_dev *pdev; /* the PCI-device */ |
| } iTCO_wdt_private; |
| |
| static struct platform_device *iTCO_wdt_platform_device; /* the watchdog platform device */ |
| |
| /* module parameters */ |
| #define WATCHDOG_HEARTBEAT 30 /* 30 sec default heartbeat */ |
| static int heartbeat = WATCHDOG_HEARTBEAT; /* in seconds */ |
| module_param(heartbeat, int, 0); |
| MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (2<heartbeat<39 (TCO v1) or 613 (TCO v2), default=" __MODULE_STRING(WATCHDOG_HEARTBEAT) ")"); |
| |
| static int nowayout = WATCHDOG_NOWAYOUT; |
| module_param(nowayout, int, 0); |
| MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); |
| |
| /* iTCO Vendor Specific Support hooks */ |
| #ifdef CONFIG_ITCO_VENDOR_SUPPORT |
| extern void iTCO_vendor_pre_start(unsigned long, unsigned int); |
| extern void iTCO_vendor_pre_stop(unsigned long); |
| extern void iTCO_vendor_pre_keepalive(unsigned long, unsigned int); |
| extern void iTCO_vendor_pre_set_heartbeat(unsigned int); |
| extern int iTCO_vendor_check_noreboot_on(void); |
| #else |
| #define iTCO_vendor_pre_start(acpibase, heartbeat) {} |
| #define iTCO_vendor_pre_stop(acpibase) {} |
| #define iTCO_vendor_pre_keepalive(acpibase,heartbeat) {} |
| #define iTCO_vendor_pre_set_heartbeat(heartbeat) {} |
| #define iTCO_vendor_check_noreboot_on() 1 /* 1=check noreboot; 0=don't check */ |
| #endif |
| |
| /* |
| * Some TCO specific functions |
| */ |
| |
| static inline unsigned int seconds_to_ticks(int seconds) |
| { |
| /* the internal timer is stored as ticks which decrement |
| * every 0.6 seconds */ |
| return (seconds * 10) / 6; |
| } |
| |
| static void iTCO_wdt_set_NO_REBOOT_bit(void) |
| { |
| u32 val32; |
| |
| /* Set the NO_REBOOT bit: this disables reboots */ |
| if (iTCO_wdt_private.iTCO_version == 2) { |
| val32 = readl(iTCO_wdt_private.gcs); |
| val32 |= 0x00000020; |
| writel(val32, iTCO_wdt_private.gcs); |
| } else if (iTCO_wdt_private.iTCO_version == 1) { |
| pci_read_config_dword(iTCO_wdt_private.pdev, 0xd4, &val32); |
| val32 |= 0x00000002; |
| pci_write_config_dword(iTCO_wdt_private.pdev, 0xd4, val32); |
| } |
| } |
| |
| static int iTCO_wdt_unset_NO_REBOOT_bit(void) |
| { |
| int ret = 0; |
| u32 val32; |
| |
| /* Unset the NO_REBOOT bit: this enables reboots */ |
| if (iTCO_wdt_private.iTCO_version == 2) { |
| val32 = readl(iTCO_wdt_private.gcs); |
| val32 &= 0xffffffdf; |
| writel(val32, iTCO_wdt_private.gcs); |
| |
| val32 = readl(iTCO_wdt_private.gcs); |
| if (val32 & 0x00000020) |
| ret = -EIO; |
| } else if (iTCO_wdt_private.iTCO_version == 1) { |
| pci_read_config_dword(iTCO_wdt_private.pdev, 0xd4, &val32); |
| val32 &= 0xfffffffd; |
| pci_write_config_dword(iTCO_wdt_private.pdev, 0xd4, val32); |
| |
| pci_read_config_dword(iTCO_wdt_private.pdev, 0xd4, &val32); |
| if (val32 & 0x00000002) |
| ret = -EIO; |
| } |
| |
| return ret; /* returns: 0 = OK, -EIO = Error */ |
| } |
| |
| static int iTCO_wdt_start(void) |
| { |
| unsigned int val; |
| |
| spin_lock(&iTCO_wdt_private.io_lock); |
| |
| iTCO_vendor_pre_start(iTCO_wdt_private.ACPIBASE, heartbeat); |
| |
| /* disable chipset's NO_REBOOT bit */ |
| if (iTCO_wdt_unset_NO_REBOOT_bit()) { |
| spin_unlock(&iTCO_wdt_private.io_lock); |
| printk(KERN_ERR PFX "failed to reset NO_REBOOT flag, reboot disabled by hardware\n"); |
| return -EIO; |
| } |
| |
| /* Bit 11: TCO Timer Halt -> 0 = The TCO timer is enabled to count */ |
| val = inw(TCO1_CNT); |
| val &= 0xf7ff; |
| outw(val, TCO1_CNT); |
| val = inw(TCO1_CNT); |
| spin_unlock(&iTCO_wdt_private.io_lock); |
| |
| if (val & 0x0800) |
| return -1; |
| return 0; |
| } |
| |
| static int iTCO_wdt_stop(void) |
| { |
| unsigned int val; |
| |
| spin_lock(&iTCO_wdt_private.io_lock); |
| |
| iTCO_vendor_pre_stop(iTCO_wdt_private.ACPIBASE); |
| |
| /* Bit 11: TCO Timer Halt -> 1 = The TCO timer is disabled */ |
| val = inw(TCO1_CNT); |
| val |= 0x0800; |
| outw(val, TCO1_CNT); |
| val = inw(TCO1_CNT); |
| |
| /* Set the NO_REBOOT bit to prevent later reboots, just for sure */ |
| iTCO_wdt_set_NO_REBOOT_bit(); |
| |
| spin_unlock(&iTCO_wdt_private.io_lock); |
| |
| if ((val & 0x0800) == 0) |
| return -1; |
| return 0; |
| } |
| |
| static int iTCO_wdt_keepalive(void) |
| { |
| spin_lock(&iTCO_wdt_private.io_lock); |
| |
| iTCO_vendor_pre_keepalive(iTCO_wdt_private.ACPIBASE, heartbeat); |
| |
| /* Reload the timer by writing to the TCO Timer Counter register */ |
| if (iTCO_wdt_private.iTCO_version == 2) { |
| outw(0x01, TCO_RLD); |
| } else if (iTCO_wdt_private.iTCO_version == 1) { |
| outb(0x01, TCO_RLD); |
| } |
| |
| spin_unlock(&iTCO_wdt_private.io_lock); |
| return 0; |
| } |
| |
| static int iTCO_wdt_set_heartbeat(int t) |
| { |
| unsigned int val16; |
| unsigned char val8; |
| unsigned int tmrval; |
| |
| tmrval = seconds_to_ticks(t); |
| /* from the specs: */ |
| /* "Values of 0h-3h are ignored and should not be attempted" */ |
| if (tmrval < 0x04) |
| return -EINVAL; |
| if (((iTCO_wdt_private.iTCO_version == 2) && (tmrval > 0x3ff)) || |
| ((iTCO_wdt_private.iTCO_version == 1) && (tmrval > 0x03f))) |
| return -EINVAL; |
| |
| iTCO_vendor_pre_set_heartbeat(tmrval); |
| |
| /* Write new heartbeat to watchdog */ |
| if (iTCO_wdt_private.iTCO_version == 2) { |
| spin_lock(&iTCO_wdt_private.io_lock); |
| val16 = inw(TCOv2_TMR); |
| val16 &= 0xfc00; |
| val16 |= tmrval; |
| outw(val16, TCOv2_TMR); |
| val16 = inw(TCOv2_TMR); |
| spin_unlock(&iTCO_wdt_private.io_lock); |
| |
| if ((val16 & 0x3ff) != tmrval) |
| return -EINVAL; |
| } else if (iTCO_wdt_private.iTCO_version == 1) { |
| spin_lock(&iTCO_wdt_private.io_lock); |
| val8 = inb(TCOv1_TMR); |
| val8 &= 0xc0; |
| val8 |= (tmrval & 0xff); |
| outb(val8, TCOv1_TMR); |
| val8 = inb(TCOv1_TMR); |
| spin_unlock(&iTCO_wdt_private.io_lock); |
| |
| if ((val8 & 0x3f) != tmrval) |
| return -EINVAL; |
| } |
| |
| heartbeat = t; |
| return 0; |
| } |
| |
| static int iTCO_wdt_get_timeleft (int *time_left) |
| { |
| unsigned int val16; |
| unsigned char val8; |
| |
| /* read the TCO Timer */ |
| if (iTCO_wdt_private.iTCO_version == 2) { |
| spin_lock(&iTCO_wdt_private.io_lock); |
| val16 = inw(TCO_RLD); |
| val16 &= 0x3ff; |
| spin_unlock(&iTCO_wdt_private.io_lock); |
| |
| *time_left = (val16 * 6) / 10; |
| } else if (iTCO_wdt_private.iTCO_version == 1) { |
| spin_lock(&iTCO_wdt_private.io_lock); |
| val8 = inb(TCO_RLD); |
| val8 &= 0x3f; |
| spin_unlock(&iTCO_wdt_private.io_lock); |
| |
| *time_left = (val8 * 6) / 10; |
| } else |
| return -EINVAL; |
| return 0; |
| } |
| |
| /* |
| * /dev/watchdog handling |
| */ |
| |
| static int iTCO_wdt_open (struct inode *inode, struct file *file) |
| { |
| /* /dev/watchdog can only be opened once */ |
| if (test_and_set_bit(0, &is_active)) |
| return -EBUSY; |
| |
| /* |
| * Reload and activate timer |
| */ |
| iTCO_wdt_keepalive(); |
| iTCO_wdt_start(); |
| return nonseekable_open(inode, file); |
| } |
| |
| static int iTCO_wdt_release (struct inode *inode, struct file *file) |
| { |
| /* |
| * Shut off the timer. |
| */ |
| if (expect_release == 42) { |
| iTCO_wdt_stop(); |
| } else { |
| printk(KERN_CRIT PFX "Unexpected close, not stopping watchdog!\n"); |
| iTCO_wdt_keepalive(); |
| } |
| clear_bit(0, &is_active); |
| expect_release = 0; |
| return 0; |
| } |
| |
| static ssize_t iTCO_wdt_write (struct file *file, const char __user *data, |
| size_t len, loff_t * ppos) |
| { |
| /* See if we got the magic character 'V' and reload the timer */ |
| if (len) { |
| if (!nowayout) { |
| size_t i; |
| |
| /* note: just in case someone wrote the magic character |
| * five months ago... */ |
| expect_release = 0; |
| |
| /* scan to see whether or not we got the magic character */ |
| for (i = 0; i != len; i++) { |
| char c; |
| if (get_user(c, data+i)) |
| return -EFAULT; |
| if (c == 'V') |
| expect_release = 42; |
| } |
| } |
| |
| /* someone wrote to us, we should reload the timer */ |
| iTCO_wdt_keepalive(); |
| } |
| return len; |
| } |
| |
| static int iTCO_wdt_ioctl (struct inode *inode, struct file *file, |
| unsigned int cmd, unsigned long arg) |
| { |
| int new_options, retval = -EINVAL; |
| int new_heartbeat; |
| void __user *argp = (void __user *)arg; |
| int __user *p = argp; |
| static struct watchdog_info ident = { |
| .options = WDIOF_SETTIMEOUT | |
| WDIOF_KEEPALIVEPING | |
| WDIOF_MAGICCLOSE, |
| .firmware_version = 0, |
| .identity = DRV_NAME, |
| }; |
| |
| switch (cmd) { |
| case WDIOC_GETSUPPORT: |
| return copy_to_user(argp, &ident, |
| sizeof (ident)) ? -EFAULT : 0; |
| |
| case WDIOC_GETSTATUS: |
| case WDIOC_GETBOOTSTATUS: |
| return put_user(0, p); |
| |
| case WDIOC_KEEPALIVE: |
| iTCO_wdt_keepalive(); |
| return 0; |
| |
| case WDIOC_SETOPTIONS: |
| { |
| if (get_user(new_options, p)) |
| return -EFAULT; |
| |
| if (new_options & WDIOS_DISABLECARD) { |
| iTCO_wdt_stop(); |
| retval = 0; |
| } |
| |
| if (new_options & WDIOS_ENABLECARD) { |
| iTCO_wdt_keepalive(); |
| iTCO_wdt_start(); |
| retval = 0; |
| } |
| |
| return retval; |
| } |
| |
| case WDIOC_SETTIMEOUT: |
| { |
| if (get_user(new_heartbeat, p)) |
| return -EFAULT; |
| |
| if (iTCO_wdt_set_heartbeat(new_heartbeat)) |
| return -EINVAL; |
| |
| iTCO_wdt_keepalive(); |
| /* Fall */ |
| } |
| |
| case WDIOC_GETTIMEOUT: |
| return put_user(heartbeat, p); |
| |
| case WDIOC_GETTIMELEFT: |
| { |
| int time_left; |
| |
| if (iTCO_wdt_get_timeleft(&time_left)) |
| return -EINVAL; |
| |
| return put_user(time_left, p); |
| } |
| |
| default: |
| return -ENOTTY; |
| } |
| } |
| |
| /* |
| * Kernel Interfaces |
| */ |
| |
| static const struct file_operations iTCO_wdt_fops = { |
| .owner = THIS_MODULE, |
| .llseek = no_llseek, |
| .write = iTCO_wdt_write, |
| .ioctl = iTCO_wdt_ioctl, |
| .open = iTCO_wdt_open, |
| .release = iTCO_wdt_release, |
| }; |
| |
| static struct miscdevice iTCO_wdt_miscdev = { |
| .minor = WATCHDOG_MINOR, |
| .name = "watchdog", |
| .fops = &iTCO_wdt_fops, |
| }; |
| |
| /* |
| * Init & exit routines |
| */ |
| |
| static int iTCO_wdt_init(struct pci_dev *pdev, const struct pci_device_id *ent, struct platform_device *dev) |
| { |
| int ret; |
| u32 base_address; |
| unsigned long RCBA; |
| unsigned long val32; |
| |
| /* |
| * Find the ACPI/PM base I/O address which is the base |
| * for the TCO registers (TCOBASE=ACPIBASE + 0x60) |
| * ACPIBASE is bits [15:7] from 0x40-0x43 |
| */ |
| pci_read_config_dword(pdev, 0x40, &base_address); |
| base_address &= 0x0000ff80; |
| if (base_address == 0x00000000) { |
| /* Something's wrong here, ACPIBASE has to be set */ |
| printk(KERN_ERR PFX "failed to get TCOBASE address\n"); |
| pci_dev_put(pdev); |
| return -ENODEV; |
| } |
| iTCO_wdt_private.iTCO_version = iTCO_chipset_info[ent->driver_data].iTCO_version; |
| iTCO_wdt_private.ACPIBASE = base_address; |
| iTCO_wdt_private.pdev = pdev; |
| |
| /* Get the Memory-Mapped GCS register, we need it for the NO_REBOOT flag (TCO v2) */ |
| /* To get access to it you have to read RCBA from PCI Config space 0xf0 |
| and use it as base. GCS = RCBA + ICH6_GCS(0x3410). */ |
| if (iTCO_wdt_private.iTCO_version == 2) { |
| pci_read_config_dword(pdev, 0xf0, &base_address); |
| RCBA = base_address & 0xffffc000; |
| iTCO_wdt_private.gcs = ioremap((RCBA + 0x3410),4); |
| } |
| |
| /* Check chipset's NO_REBOOT bit */ |
| if (iTCO_wdt_unset_NO_REBOOT_bit() && iTCO_vendor_check_noreboot_on()) { |
| printk(KERN_ERR PFX "failed to reset NO_REBOOT flag, reboot disabled by hardware\n"); |
| ret = -ENODEV; /* Cannot reset NO_REBOOT bit */ |
| goto out; |
| } |
| |
| /* Set the NO_REBOOT bit to prevent later reboots, just for sure */ |
| iTCO_wdt_set_NO_REBOOT_bit(); |
| |
| /* Set the TCO_EN bit in SMI_EN register */ |
| if (!request_region(SMI_EN, 4, "iTCO_wdt")) { |
| printk(KERN_ERR PFX "I/O address 0x%04lx already in use\n", |
| SMI_EN ); |
| ret = -EIO; |
| goto out; |
| } |
| val32 = inl(SMI_EN); |
| val32 &= 0xffffdfff; /* Turn off SMI clearing watchdog */ |
| outl(val32, SMI_EN); |
| release_region(SMI_EN, 4); |
| |
| /* The TCO I/O registers reside in a 32-byte range pointed to by the TCOBASE value */ |
| if (!request_region (TCOBASE, 0x20, "iTCO_wdt")) { |
| printk (KERN_ERR PFX "I/O address 0x%04lx already in use\n", |
| TCOBASE); |
| ret = -EIO; |
| goto out; |
| } |
| |
| printk(KERN_INFO PFX "Found a %s TCO device (Version=%d, TCOBASE=0x%04lx)\n", |
| iTCO_chipset_info[ent->driver_data].name, |
| iTCO_chipset_info[ent->driver_data].iTCO_version, |
| TCOBASE); |
| |
| /* Clear out the (probably old) status */ |
| outb(0, TCO1_STS); |
| outb(3, TCO2_STS); |
| |
| /* Make sure the watchdog is not running */ |
| iTCO_wdt_stop(); |
| |
| /* Check that the heartbeat value is within it's range ; if not reset to the default */ |
| if (iTCO_wdt_set_heartbeat(heartbeat)) { |
| iTCO_wdt_set_heartbeat(WATCHDOG_HEARTBEAT); |
| printk(KERN_INFO PFX "heartbeat value must be 2<heartbeat<39 (TCO v1) or 613 (TCO v2), using %d\n", |
| heartbeat); |
| } |
| |
| ret = misc_register(&iTCO_wdt_miscdev); |
| if (ret != 0) { |
| printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n", |
| WATCHDOG_MINOR, ret); |
| goto unreg_region; |
| } |
| |
| printk (KERN_INFO PFX "initialized. heartbeat=%d sec (nowayout=%d)\n", |
| heartbeat, nowayout); |
| |
| return 0; |
| |
| unreg_region: |
| release_region (TCOBASE, 0x20); |
| out: |
| if (iTCO_wdt_private.iTCO_version == 2) |
| iounmap(iTCO_wdt_private.gcs); |
| pci_dev_put(iTCO_wdt_private.pdev); |
| iTCO_wdt_private.ACPIBASE = 0; |
| return ret; |
| } |
| |
| static void iTCO_wdt_cleanup(void) |
| { |
| /* Stop the timer before we leave */ |
| if (!nowayout) |
| iTCO_wdt_stop(); |
| |
| /* Deregister */ |
| misc_deregister(&iTCO_wdt_miscdev); |
| release_region(TCOBASE, 0x20); |
| if (iTCO_wdt_private.iTCO_version == 2) |
| iounmap(iTCO_wdt_private.gcs); |
| pci_dev_put(iTCO_wdt_private.pdev); |
| iTCO_wdt_private.ACPIBASE = 0; |
| } |
| |
| static int iTCO_wdt_probe(struct platform_device *dev) |
| { |
| int found = 0; |
| struct pci_dev *pdev = NULL; |
| const struct pci_device_id *ent; |
| |
| spin_lock_init(&iTCO_wdt_private.io_lock); |
| |
| for_each_pci_dev(pdev) { |
| ent = pci_match_id(iTCO_wdt_pci_tbl, pdev); |
| if (ent) { |
| if (!(iTCO_wdt_init(pdev, ent, dev))) { |
| found++; |
| break; |
| } |
| } |
| } |
| |
| if (!found) { |
| printk(KERN_INFO PFX "No card detected\n"); |
| return -ENODEV; |
| } |
| |
| return 0; |
| } |
| |
| static int iTCO_wdt_remove(struct platform_device *dev) |
| { |
| if (iTCO_wdt_private.ACPIBASE) |
| iTCO_wdt_cleanup(); |
| |
| return 0; |
| } |
| |
| static void iTCO_wdt_shutdown(struct platform_device *dev) |
| { |
| iTCO_wdt_stop(); |
| } |
| |
| #define iTCO_wdt_suspend NULL |
| #define iTCO_wdt_resume NULL |
| |
| static struct platform_driver iTCO_wdt_driver = { |
| .probe = iTCO_wdt_probe, |
| .remove = iTCO_wdt_remove, |
| .shutdown = iTCO_wdt_shutdown, |
| .suspend = iTCO_wdt_suspend, |
| .resume = iTCO_wdt_resume, |
| .driver = { |
| .owner = THIS_MODULE, |
| .name = DRV_NAME, |
| }, |
| }; |
| |
| static int __init iTCO_wdt_init_module(void) |
| { |
| int err; |
| |
| printk(KERN_INFO PFX "Intel TCO WatchDog Timer Driver v%s (%s)\n", |
| DRV_VERSION, DRV_RELDATE); |
| |
| err = platform_driver_register(&iTCO_wdt_driver); |
| if (err) |
| return err; |
| |
| iTCO_wdt_platform_device = platform_device_register_simple(DRV_NAME, -1, NULL, 0); |
| if (IS_ERR(iTCO_wdt_platform_device)) { |
| err = PTR_ERR(iTCO_wdt_platform_device); |
| goto unreg_platform_driver; |
| } |
| |
| return 0; |
| |
| unreg_platform_driver: |
| platform_driver_unregister(&iTCO_wdt_driver); |
| return err; |
| } |
| |
| static void __exit iTCO_wdt_cleanup_module(void) |
| { |
| platform_device_unregister(iTCO_wdt_platform_device); |
| platform_driver_unregister(&iTCO_wdt_driver); |
| printk(KERN_INFO PFX "Watchdog Module Unloaded.\n"); |
| } |
| |
| module_init(iTCO_wdt_init_module); |
| module_exit(iTCO_wdt_cleanup_module); |
| |
| MODULE_AUTHOR("Wim Van Sebroeck <wim@iguana.be>"); |
| MODULE_DESCRIPTION("Intel TCO WatchDog Timer Driver"); |
| MODULE_VERSION(DRV_VERSION); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); |