| /* |
| * drivers/mmc/host/sdhci-msm.c - Qualcomm MSM SDHCI Platform |
| * driver source file |
| * |
| * Copyright (c) 2012-2013, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/mmc/host.h> |
| #include <linux/mmc/card.h> |
| #include <linux/mmc/sdio_func.h> |
| #include <linux/gfp.h> |
| #include <linux/of.h> |
| #include <linux/of_gpio.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/types.h> |
| #include <linux/input.h> |
| #include <linux/platform_device.h> |
| #include <linux/wait.h> |
| |
| #include "sdhci-pltfm.h" |
| |
| #define CORE_HC_MODE 0x78 |
| #define HC_MODE_EN 0x1 |
| |
| #define CORE_POWER 0x0 |
| #define CORE_SW_RST (1 << 7) |
| |
| #define CORE_PWRCTL_STATUS 0xDC |
| #define CORE_PWRCTL_MASK 0xE0 |
| #define CORE_PWRCTL_CLEAR 0xE4 |
| #define CORE_PWRCTL_CTL 0xE8 |
| |
| #define CORE_PWRCTL_BUS_OFF 0x01 |
| #define CORE_PWRCTL_BUS_ON (1 << 1) |
| #define CORE_PWRCTL_IO_LOW (1 << 2) |
| #define CORE_PWRCTL_IO_HIGH (1 << 3) |
| |
| #define CORE_PWRCTL_BUS_SUCCESS 0x01 |
| #define CORE_PWRCTL_BUS_FAIL (1 << 1) |
| #define CORE_PWRCTL_IO_SUCCESS (1 << 2) |
| #define CORE_PWRCTL_IO_FAIL (1 << 3) |
| |
| #define INT_MASK 0xF |
| |
| /* This structure keeps information per regulator */ |
| struct sdhci_msm_reg_data { |
| /* voltage regulator handle */ |
| struct regulator *reg; |
| /* regulator name */ |
| const char *name; |
| /* voltage level to be set */ |
| u32 low_vol_level; |
| u32 high_vol_level; |
| /* Load values for low power and high power mode */ |
| u32 lpm_uA; |
| u32 hpm_uA; |
| |
| /* is this regulator enabled? */ |
| bool is_enabled; |
| /* is this regulator needs to be always on? */ |
| bool is_always_on; |
| /* is low power mode setting required for this regulator? */ |
| bool lpm_sup; |
| }; |
| |
| /* |
| * This structure keeps information for all the |
| * regulators required for a SDCC slot. |
| */ |
| struct sdhci_msm_slot_reg_data { |
| /* keeps VDD/VCC regulator info */ |
| struct sdhci_msm_reg_data *vdd_data; |
| /* keeps VDD IO regulator info */ |
| struct sdhci_msm_reg_data *vdd_io_data; |
| }; |
| |
| struct sdhci_msm_gpio { |
| u32 no; |
| const char *name; |
| bool is_enabled; |
| }; |
| |
| struct sdhci_msm_gpio_data { |
| struct sdhci_msm_gpio *gpio; |
| u8 size; |
| }; |
| |
| struct sdhci_msm_pad_pull { |
| enum msm_tlmm_pull_tgt no; |
| u32 val; |
| }; |
| |
| struct sdhci_msm_pad_pull_data { |
| struct sdhci_msm_pad_pull *on; |
| struct sdhci_msm_pad_pull *off; |
| u8 size; |
| }; |
| |
| struct sdhci_msm_pad_drv { |
| enum msm_tlmm_hdrive_tgt no; |
| u32 val; |
| }; |
| |
| struct sdhci_msm_pad_drv_data { |
| struct sdhci_msm_pad_drv *on; |
| struct sdhci_msm_pad_drv *off; |
| u8 size; |
| }; |
| |
| struct sdhci_msm_pad_data { |
| struct sdhci_msm_pad_pull_data *pull; |
| struct sdhci_msm_pad_drv_data *drv; |
| }; |
| |
| |
| struct sdhci_msm_pin_data { |
| /* |
| * = 1 if controller pins are using gpios |
| * = 0 if controller has dedicated MSM pads |
| */ |
| u8 is_gpio; |
| bool cfg_sts; |
| struct sdhci_msm_gpio_data *gpio_data; |
| struct sdhci_msm_pad_data *pad_data; |
| }; |
| |
| struct sdhci_msm_pltfm_data { |
| /* Supported UHS-I Modes */ |
| u32 caps; |
| |
| /* More capabilities */ |
| u32 caps2; |
| |
| unsigned long mmc_bus_width; |
| u32 max_clk; |
| struct sdhci_msm_slot_reg_data *vreg_data; |
| bool nonremovable; |
| struct sdhci_msm_pin_data *pin_data; |
| }; |
| |
| struct sdhci_msm_host { |
| void __iomem *core_mem; /* MSM SDCC mapped address */ |
| struct clk *clk; /* main SD/MMC bus clock */ |
| struct clk *pclk; /* SDHC peripheral bus clock */ |
| struct clk *bus_clk; /* SDHC bus voter clock */ |
| struct sdhci_msm_pltfm_data *pdata; |
| struct mmc_host *mmc; |
| struct sdhci_pltfm_data sdhci_msm_pdata; |
| wait_queue_head_t pwr_irq_wait; |
| }; |
| |
| enum vdd_io_level { |
| /* set vdd_io_data->low_vol_level */ |
| VDD_IO_LOW, |
| /* set vdd_io_data->high_vol_level */ |
| VDD_IO_HIGH, |
| /* |
| * set whatever there in voltage_level (third argument) of |
| * sdhci_msm_set_vdd_io_vol() function. |
| */ |
| VDD_IO_SET_LEVEL, |
| }; |
| |
| static int sdhci_msm_setup_gpio(struct sdhci_msm_pltfm_data *pdata, bool enable) |
| { |
| struct sdhci_msm_gpio_data *curr; |
| int i, ret = 0; |
| |
| curr = pdata->pin_data->gpio_data; |
| for (i = 0; i < curr->size; i++) { |
| if (!gpio_is_valid(curr->gpio[i].no)) { |
| ret = -EINVAL; |
| pr_err("%s: Invalid gpio = %d\n", __func__, |
| curr->gpio[i].no); |
| goto free_gpios; |
| } |
| if (enable) { |
| ret = gpio_request(curr->gpio[i].no, |
| curr->gpio[i].name); |
| if (ret) { |
| pr_err("%s: gpio_request(%d, %s) failed %d\n", |
| __func__, curr->gpio[i].no, |
| curr->gpio[i].name, ret); |
| goto free_gpios; |
| } |
| curr->gpio[i].is_enabled = true; |
| } else { |
| gpio_free(curr->gpio[i].no); |
| curr->gpio[i].is_enabled = false; |
| } |
| } |
| return ret; |
| |
| free_gpios: |
| for (i--; i >= 0; i--) { |
| gpio_free(curr->gpio[i].no); |
| curr->gpio[i].is_enabled = false; |
| } |
| return ret; |
| } |
| |
| static int sdhci_msm_setup_pad(struct sdhci_msm_pltfm_data *pdata, bool enable) |
| { |
| struct sdhci_msm_pad_data *curr; |
| int i; |
| |
| curr = pdata->pin_data->pad_data; |
| for (i = 0; i < curr->drv->size; i++) { |
| if (enable) |
| msm_tlmm_set_hdrive(curr->drv->on[i].no, |
| curr->drv->on[i].val); |
| else |
| msm_tlmm_set_hdrive(curr->drv->off[i].no, |
| curr->drv->off[i].val); |
| } |
| |
| for (i = 0; i < curr->pull->size; i++) { |
| if (enable) |
| msm_tlmm_set_pull(curr->pull->on[i].no, |
| curr->pull->on[i].val); |
| else |
| msm_tlmm_set_pull(curr->pull->off[i].no, |
| curr->pull->off[i].val); |
| } |
| |
| return 0; |
| } |
| |
| static int sdhci_msm_setup_pins(struct sdhci_msm_pltfm_data *pdata, bool enable) |
| { |
| int ret = 0; |
| |
| if (!pdata->pin_data || (pdata->pin_data->cfg_sts == enable)) |
| return 0; |
| if (pdata->pin_data->is_gpio) |
| ret = sdhci_msm_setup_gpio(pdata, enable); |
| else |
| ret = sdhci_msm_setup_pad(pdata, enable); |
| |
| if (!ret) |
| pdata->pin_data->cfg_sts = enable; |
| |
| return ret; |
| } |
| |
| static int sdhci_msm_dt_get_array(struct device *dev, const char *prop_name, |
| u32 **out, int *len, u32 size) |
| { |
| int ret = 0; |
| struct device_node *np = dev->of_node; |
| size_t sz; |
| u32 *arr = NULL; |
| |
| if (!of_get_property(np, prop_name, len)) { |
| ret = -EINVAL; |
| goto out; |
| } |
| sz = *len = *len / sizeof(*arr); |
| if (sz <= 0 || (size > 0 && (sz != size))) { |
| dev_err(dev, "%s invalid size\n", prop_name); |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| arr = devm_kzalloc(dev, sz * sizeof(*arr), GFP_KERNEL); |
| if (!arr) { |
| dev_err(dev, "%s failed allocating memory\n", prop_name); |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| ret = of_property_read_u32_array(np, prop_name, arr, sz); |
| if (ret < 0) { |
| dev_err(dev, "%s failed reading array %d\n", prop_name, ret); |
| goto out; |
| } |
| *out = arr; |
| out: |
| if (ret) |
| *len = 0; |
| return ret; |
| } |
| |
| #define MAX_PROP_SIZE 32 |
| static int sdhci_msm_dt_parse_vreg_info(struct device *dev, |
| struct sdhci_msm_reg_data **vreg_data, const char *vreg_name) |
| { |
| int len, ret = 0; |
| const __be32 *prop; |
| char prop_name[MAX_PROP_SIZE]; |
| struct sdhci_msm_reg_data *vreg; |
| struct device_node *np = dev->of_node; |
| |
| snprintf(prop_name, MAX_PROP_SIZE, "%s-supply", vreg_name); |
| if (!of_parse_phandle(np, prop_name, 0)) { |
| dev_err(dev, "No vreg data found for %s\n", vreg_name); |
| ret = -EINVAL; |
| return ret; |
| } |
| |
| vreg = devm_kzalloc(dev, sizeof(*vreg), GFP_KERNEL); |
| if (!vreg) { |
| dev_err(dev, "No memory for vreg: %s\n", vreg_name); |
| ret = -ENOMEM; |
| return ret; |
| } |
| |
| vreg->name = vreg_name; |
| |
| snprintf(prop_name, MAX_PROP_SIZE, |
| "qcom,%s-always-on", vreg_name); |
| if (of_get_property(np, prop_name, NULL)) |
| vreg->is_always_on = true; |
| |
| snprintf(prop_name, MAX_PROP_SIZE, |
| "qcom,%s-lpm-sup", vreg_name); |
| if (of_get_property(np, prop_name, NULL)) |
| vreg->lpm_sup = true; |
| |
| snprintf(prop_name, MAX_PROP_SIZE, |
| "qcom,%s-voltage-level", vreg_name); |
| prop = of_get_property(np, prop_name, &len); |
| if (!prop || (len != (2 * sizeof(__be32)))) { |
| dev_warn(dev, "%s %s property\n", |
| prop ? "invalid format" : "no", prop_name); |
| } else { |
| vreg->low_vol_level = be32_to_cpup(&prop[0]); |
| vreg->high_vol_level = be32_to_cpup(&prop[1]); |
| } |
| |
| snprintf(prop_name, MAX_PROP_SIZE, |
| "qcom,%s-current-level", vreg_name); |
| prop = of_get_property(np, prop_name, &len); |
| if (!prop || (len != (2 * sizeof(__be32)))) { |
| dev_warn(dev, "%s %s property\n", |
| prop ? "invalid format" : "no", prop_name); |
| } else { |
| vreg->lpm_uA = be32_to_cpup(&prop[0]); |
| vreg->hpm_uA = be32_to_cpup(&prop[1]); |
| } |
| |
| *vreg_data = vreg; |
| dev_dbg(dev, "%s: %s %s vol=[%d %d]uV, curr=[%d %d]uA\n", |
| vreg->name, vreg->is_always_on ? "always_on," : "", |
| vreg->lpm_sup ? "lpm_sup," : "", vreg->low_vol_level, |
| vreg->high_vol_level, vreg->lpm_uA, vreg->hpm_uA); |
| |
| return ret; |
| } |
| |
| /* GPIO/Pad data extraction */ |
| static int sdhci_msm_dt_get_pad_pull_info(struct device *dev, int id, |
| struct sdhci_msm_pad_pull_data **pad_pull_data) |
| { |
| int ret = 0, base = 0, len, i; |
| u32 *tmp; |
| struct sdhci_msm_pad_pull_data *pull_data; |
| struct sdhci_msm_pad_pull *pull; |
| |
| switch (id) { |
| case 1: |
| base = TLMM_PULL_SDC1_CLK; |
| break; |
| case 2: |
| base = TLMM_PULL_SDC2_CLK; |
| break; |
| case 3: |
| base = TLMM_PULL_SDC3_CLK; |
| break; |
| case 4: |
| base = TLMM_PULL_SDC4_CLK; |
| break; |
| default: |
| dev_err(dev, "%s: Invalid slot id\n", __func__); |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| pull_data = devm_kzalloc(dev, sizeof(struct sdhci_msm_pad_pull_data), |
| GFP_KERNEL); |
| if (!pull_data) { |
| dev_err(dev, "No memory for msm_mmc_pad_pull_data\n"); |
| ret = -ENOMEM; |
| goto out; |
| } |
| pull_data->size = 3; /* array size for clk, cmd, data */ |
| |
| /* Allocate on, off configs for clk, cmd, data */ |
| pull = devm_kzalloc(dev, 2 * pull_data->size *\ |
| sizeof(struct sdhci_msm_pad_pull), GFP_KERNEL); |
| if (!pull) { |
| dev_err(dev, "No memory for msm_mmc_pad_pull\n"); |
| ret = -ENOMEM; |
| goto out; |
| } |
| pull_data->on = pull; |
| pull_data->off = pull + pull_data->size; |
| |
| ret = sdhci_msm_dt_get_array(dev, "qcom,pad-pull-on", |
| &tmp, &len, pull_data->size); |
| if (ret) |
| goto out; |
| |
| for (i = 0; i < len; i++) { |
| pull_data->on[i].no = base + i; |
| pull_data->on[i].val = tmp[i]; |
| dev_dbg(dev, "%s: val[%d]=0x%x\n", __func__, |
| i, pull_data->on[i].val); |
| } |
| |
| ret = sdhci_msm_dt_get_array(dev, "qcom,pad-pull-off", |
| &tmp, &len, pull_data->size); |
| if (ret) |
| goto out; |
| |
| for (i = 0; i < len; i++) { |
| pull_data->off[i].no = base + i; |
| pull_data->off[i].val = tmp[i]; |
| dev_dbg(dev, "%s: val[%d]=0x%x\n", __func__, |
| i, pull_data->off[i].val); |
| } |
| |
| *pad_pull_data = pull_data; |
| out: |
| return ret; |
| } |
| |
| static int sdhci_msm_dt_get_pad_drv_info(struct device *dev, int id, |
| struct sdhci_msm_pad_drv_data **pad_drv_data) |
| { |
| int ret = 0, base = 0, len, i; |
| u32 *tmp; |
| struct sdhci_msm_pad_drv_data *drv_data; |
| struct sdhci_msm_pad_drv *drv; |
| |
| switch (id) { |
| case 1: |
| base = TLMM_HDRV_SDC1_CLK; |
| break; |
| case 2: |
| base = TLMM_HDRV_SDC2_CLK; |
| break; |
| case 3: |
| base = TLMM_HDRV_SDC3_CLK; |
| break; |
| case 4: |
| base = TLMM_HDRV_SDC4_CLK; |
| break; |
| default: |
| dev_err(dev, "%s: Invalid slot id\n", __func__); |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| drv_data = devm_kzalloc(dev, sizeof(struct sdhci_msm_pad_drv_data), |
| GFP_KERNEL); |
| if (!drv_data) { |
| dev_err(dev, "No memory for msm_mmc_pad_drv_data\n"); |
| ret = -ENOMEM; |
| goto out; |
| } |
| drv_data->size = 3; /* array size for clk, cmd, data */ |
| |
| /* Allocate on, off configs for clk, cmd, data */ |
| drv = devm_kzalloc(dev, 2 * drv_data->size *\ |
| sizeof(struct sdhci_msm_pad_drv), GFP_KERNEL); |
| if (!drv) { |
| dev_err(dev, "No memory msm_mmc_pad_drv\n"); |
| ret = -ENOMEM; |
| goto out; |
| } |
| drv_data->on = drv; |
| drv_data->off = drv + drv_data->size; |
| |
| ret = sdhci_msm_dt_get_array(dev, "qcom,pad-drv-on", |
| &tmp, &len, drv_data->size); |
| if (ret) |
| goto out; |
| |
| for (i = 0; i < len; i++) { |
| drv_data->on[i].no = base + i; |
| drv_data->on[i].val = tmp[i]; |
| dev_dbg(dev, "%s: val[%d]=0x%x\n", __func__, |
| i, drv_data->on[i].val); |
| } |
| |
| ret = sdhci_msm_dt_get_array(dev, "qcom,pad-drv-off", |
| &tmp, &len, drv_data->size); |
| if (ret) |
| goto out; |
| |
| for (i = 0; i < len; i++) { |
| drv_data->off[i].no = base + i; |
| drv_data->off[i].val = tmp[i]; |
| dev_dbg(dev, "%s: val[%d]=0x%x\n", __func__, |
| i, drv_data->off[i].val); |
| } |
| |
| *pad_drv_data = drv_data; |
| out: |
| return ret; |
| } |
| |
| #define GPIO_NAME_MAX_LEN 32 |
| static int sdhci_msm_dt_parse_gpio_info(struct device *dev, |
| struct sdhci_msm_pltfm_data *pdata) |
| { |
| int ret = 0, id = 0, cnt, i; |
| struct sdhci_msm_pin_data *pin_data; |
| struct device_node *np = dev->of_node; |
| |
| pin_data = devm_kzalloc(dev, sizeof(*pin_data), GFP_KERNEL); |
| if (!pin_data) { |
| dev_err(dev, "No memory for pin_data\n"); |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| cnt = of_gpio_count(np); |
| if (cnt > 0) { |
| pin_data->is_gpio = true; |
| pin_data->gpio_data = devm_kzalloc(dev, |
| sizeof(struct sdhci_msm_gpio_data), GFP_KERNEL); |
| if (!pin_data->gpio_data) { |
| dev_err(dev, "No memory for gpio_data\n"); |
| ret = -ENOMEM; |
| goto out; |
| } |
| pin_data->gpio_data->size = cnt; |
| pin_data->gpio_data->gpio = devm_kzalloc(dev, cnt * |
| sizeof(struct sdhci_msm_gpio), GFP_KERNEL); |
| |
| if (!pin_data->gpio_data->gpio) { |
| dev_err(dev, "No memory for gpio\n"); |
| ret = -ENOMEM; |
| goto out; |
| } |
| for (i = 0; i < cnt; i++) { |
| const char *name = NULL; |
| char result[GPIO_NAME_MAX_LEN]; |
| pin_data->gpio_data->gpio[i].no = of_get_gpio(np, i); |
| of_property_read_string_index(np, |
| "qcom,gpio-names", i, &name); |
| |
| snprintf(result, GPIO_NAME_MAX_LEN, "%s-%s", |
| dev_name(dev), name ? name : "?"); |
| pin_data->gpio_data->gpio[i].name = result; |
| dev_dbg(dev, "%s: gpio[%s] = %d\n", __func__, |
| pin_data->gpio_data->gpio[i].name, |
| pin_data->gpio_data->gpio[i].no); |
| } |
| } else { |
| pin_data->pad_data = |
| devm_kzalloc(dev, |
| sizeof(struct sdhci_msm_pad_data), |
| GFP_KERNEL); |
| if (!pin_data->pad_data) { |
| dev_err(dev, |
| "No memory for pin_data->pad_data\n"); |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| ret = of_alias_get_id(np, "sdhc"); |
| if (ret < 0) { |
| dev_err(dev, "Failed to get slot index %d\n", ret); |
| goto out; |
| } |
| id = ret; |
| |
| ret = sdhci_msm_dt_get_pad_pull_info( |
| dev, id, &pin_data->pad_data->pull); |
| if (ret) |
| goto out; |
| ret = sdhci_msm_dt_get_pad_drv_info( |
| dev, id, &pin_data->pad_data->drv); |
| if (ret) |
| goto out; |
| |
| } |
| pdata->pin_data = pin_data; |
| out: |
| if (ret) |
| dev_err(dev, "%s failed with err %d\n", __func__, ret); |
| return ret; |
| } |
| |
| /* Parse platform data */ |
| static struct sdhci_msm_pltfm_data *sdhci_msm_populate_pdata(struct device *dev) |
| { |
| struct sdhci_msm_pltfm_data *pdata = NULL; |
| struct device_node *np = dev->of_node; |
| u32 bus_width = 0; |
| int len, i; |
| |
| pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); |
| if (!pdata) { |
| dev_err(dev, "failed to allocate memory for platform data\n"); |
| goto out; |
| } |
| |
| of_property_read_u32(np, "qcom,bus-width", &bus_width); |
| if (bus_width == 8) |
| pdata->mmc_bus_width = MMC_CAP_8_BIT_DATA; |
| else if (bus_width == 4) |
| pdata->mmc_bus_width = MMC_CAP_4_BIT_DATA; |
| else { |
| dev_notice(dev, "invalid bus-width, default to 1-bit mode\n"); |
| pdata->mmc_bus_width = 0; |
| } |
| |
| pdata->vreg_data = devm_kzalloc(dev, sizeof(struct |
| sdhci_msm_slot_reg_data), |
| GFP_KERNEL); |
| if (!pdata->vreg_data) { |
| dev_err(dev, "failed to allocate memory for vreg data\n"); |
| goto out; |
| } |
| |
| if (sdhci_msm_dt_parse_vreg_info(dev, &pdata->vreg_data->vdd_data, |
| "vdd")) { |
| dev_err(dev, "failed parsing vdd data\n"); |
| goto out; |
| } |
| if (sdhci_msm_dt_parse_vreg_info(dev, |
| &pdata->vreg_data->vdd_io_data, |
| "vdd-io")) { |
| dev_err(dev, "failed parsing vdd-io data\n"); |
| goto out; |
| } |
| |
| if (sdhci_msm_dt_parse_gpio_info(dev, pdata)) { |
| dev_err(dev, "failed parsing gpio data\n"); |
| goto out; |
| } |
| |
| of_property_read_u32(np, "qcom,max-clk-rate", &pdata->max_clk); |
| |
| len = of_property_count_strings(np, "qcom,bus-speed-mode"); |
| |
| for (i = 0; i < len; i++) { |
| const char *name = NULL; |
| |
| of_property_read_string_index(np, |
| "qcom,bus-speed-mode", i, &name); |
| if (!name) |
| continue; |
| |
| if (!strncmp(name, "HS200_1p8v", sizeof("HS200_1p8v"))) |
| pdata->caps2 |= MMC_CAP2_HS200_1_8V_SDR; |
| else if (!strncmp(name, "HS200_1p2v", sizeof("HS200_1p2v"))) |
| pdata->caps2 |= MMC_CAP2_HS200_1_2V_SDR; |
| else if (!strncmp(name, "DDR_1p8v", sizeof("DDR_1p8v"))) |
| pdata->caps |= MMC_CAP_1_8V_DDR |
| | MMC_CAP_UHS_DDR50; |
| else if (!strncmp(name, "DDR_1p2v", sizeof("DDR_1p2v"))) |
| pdata->caps |= MMC_CAP_1_2V_DDR |
| | MMC_CAP_UHS_DDR50; |
| } |
| |
| if (of_get_property(np, "qcom,nonremovable", NULL)) |
| pdata->nonremovable = true; |
| |
| return pdata; |
| out: |
| return NULL; |
| } |
| |
| /* Regulator utility functions */ |
| static int sdhci_msm_vreg_init_reg(struct device *dev, |
| struct sdhci_msm_reg_data *vreg) |
| { |
| int ret = 0; |
| |
| /* check if regulator is already initialized? */ |
| if (vreg->reg) |
| goto out; |
| |
| /* Get the regulator handle */ |
| vreg->reg = devm_regulator_get(dev, vreg->name); |
| if (IS_ERR(vreg->reg)) { |
| ret = PTR_ERR(vreg->reg); |
| pr_err("%s: devm_regulator_get(%s) failed. ret=%d\n", |
| __func__, vreg->name, ret); |
| goto out; |
| } |
| |
| /* sanity check */ |
| if (!vreg->high_vol_level || !vreg->hpm_uA) { |
| pr_err("%s: %s invalid constraints specified\n", |
| __func__, vreg->name); |
| ret = -EINVAL; |
| } |
| |
| out: |
| return ret; |
| } |
| |
| static void sdhci_msm_vreg_deinit_reg(struct sdhci_msm_reg_data *vreg) |
| { |
| if (vreg->reg) |
| devm_regulator_put(vreg->reg); |
| } |
| |
| static int sdhci_msm_vreg_set_optimum_mode(struct sdhci_msm_reg_data |
| *vreg, int uA_load) |
| { |
| int ret = 0; |
| |
| /* |
| * regulators that do not support regulator_set_voltage also |
| * do not support regulator_set_optimum_mode |
| */ |
| ret = regulator_set_optimum_mode(vreg->reg, uA_load); |
| if (ret < 0) |
| pr_err("%s: regulator_set_optimum_mode(reg=%s,uA_load=%d) failed. ret=%d\n", |
| __func__, vreg->name, uA_load, ret); |
| else |
| /* |
| * regulator_set_optimum_mode() can return non zero |
| * value even for success case. |
| */ |
| ret = 0; |
| return ret; |
| } |
| |
| static int sdhci_msm_vreg_set_voltage(struct sdhci_msm_reg_data *vreg, |
| int min_uV, int max_uV) |
| { |
| int ret = 0; |
| |
| ret = regulator_set_voltage(vreg->reg, min_uV, max_uV); |
| if (ret) { |
| pr_err("%s: regulator_set_voltage(%s)failed. min_uV=%d,max_uV=%d,ret=%d\n", |
| __func__, vreg->name, min_uV, max_uV, ret); |
| } |
| |
| return ret; |
| } |
| |
| static int sdhci_msm_vreg_enable(struct sdhci_msm_reg_data *vreg) |
| { |
| int ret = 0; |
| |
| /* Put regulator in HPM (high power mode) */ |
| ret = sdhci_msm_vreg_set_optimum_mode(vreg, vreg->hpm_uA); |
| if (ret < 0) |
| return ret; |
| |
| if (!vreg->is_enabled) { |
| /* Set voltage level */ |
| ret = sdhci_msm_vreg_set_voltage(vreg, vreg->high_vol_level, |
| vreg->high_vol_level); |
| if (ret) |
| return ret; |
| } |
| ret = regulator_enable(vreg->reg); |
| if (ret) { |
| pr_err("%s: regulator_enable(%s) failed. ret=%d\n", |
| __func__, vreg->name, ret); |
| return ret; |
| } |
| vreg->is_enabled = true; |
| return ret; |
| } |
| |
| static int sdhci_msm_vreg_disable(struct sdhci_msm_reg_data *vreg) |
| { |
| int ret = 0; |
| |
| /* Never disable regulator marked as always_on */ |
| if (vreg->is_enabled && !vreg->is_always_on) { |
| ret = regulator_disable(vreg->reg); |
| if (ret) { |
| pr_err("%s: regulator_disable(%s) failed. ret=%d\n", |
| __func__, vreg->name, ret); |
| goto out; |
| } |
| vreg->is_enabled = false; |
| |
| ret = sdhci_msm_vreg_set_optimum_mode(vreg, 0); |
| if (ret < 0) |
| goto out; |
| |
| /* Set min. voltage level to 0 */ |
| ret = sdhci_msm_vreg_set_voltage(vreg, 0, vreg->high_vol_level); |
| if (ret) |
| goto out; |
| } else if (vreg->is_enabled && vreg->is_always_on) { |
| if (vreg->lpm_sup) { |
| /* Put always_on regulator in LPM (low power mode) */ |
| ret = sdhci_msm_vreg_set_optimum_mode(vreg, |
| vreg->lpm_uA); |
| if (ret < 0) |
| goto out; |
| } |
| } |
| out: |
| return ret; |
| } |
| |
| static int sdhci_msm_setup_vreg(struct sdhci_msm_pltfm_data *pdata, |
| bool enable, bool is_init) |
| { |
| int ret = 0, i; |
| struct sdhci_msm_slot_reg_data *curr_slot; |
| struct sdhci_msm_reg_data *vreg_table[2]; |
| |
| curr_slot = pdata->vreg_data; |
| if (!curr_slot) { |
| pr_debug("%s: vreg info unavailable,assuming the slot is powered by always on domain\n", |
| __func__); |
| goto out; |
| } |
| |
| vreg_table[0] = curr_slot->vdd_data; |
| vreg_table[1] = curr_slot->vdd_io_data; |
| |
| for (i = 0; i < ARRAY_SIZE(vreg_table); i++) { |
| if (vreg_table[i]) { |
| if (enable) |
| ret = sdhci_msm_vreg_enable(vreg_table[i]); |
| else |
| ret = sdhci_msm_vreg_disable(vreg_table[i]); |
| if (ret) |
| goto out; |
| } |
| } |
| out: |
| return ret; |
| } |
| |
| /* |
| * Reset vreg by ensuring it is off during probe. A call |
| * to enable vreg is needed to balance disable vreg |
| */ |
| static int sdhci_msm_vreg_reset(struct sdhci_msm_pltfm_data *pdata) |
| { |
| int ret; |
| |
| ret = sdhci_msm_setup_vreg(pdata, 1, true); |
| if (ret) |
| return ret; |
| ret = sdhci_msm_setup_vreg(pdata, 0, true); |
| return ret; |
| } |
| |
| /* This init function should be called only once for each SDHC slot */ |
| static int sdhci_msm_vreg_init(struct device *dev, |
| struct sdhci_msm_pltfm_data *pdata, |
| bool is_init) |
| { |
| int ret = 0; |
| struct sdhci_msm_slot_reg_data *curr_slot; |
| struct sdhci_msm_reg_data *curr_vdd_reg, *curr_vdd_io_reg; |
| |
| curr_slot = pdata->vreg_data; |
| if (!curr_slot) |
| goto out; |
| |
| curr_vdd_reg = curr_slot->vdd_data; |
| curr_vdd_io_reg = curr_slot->vdd_io_data; |
| |
| if (!is_init) |
| /* Deregister all regulators from regulator framework */ |
| goto vdd_io_reg_deinit; |
| |
| /* |
| * Get the regulator handle from voltage regulator framework |
| * and then try to set the voltage level for the regulator |
| */ |
| if (curr_vdd_reg) { |
| ret = sdhci_msm_vreg_init_reg(dev, curr_vdd_reg); |
| if (ret) |
| goto out; |
| } |
| if (curr_vdd_io_reg) { |
| ret = sdhci_msm_vreg_init_reg(dev, curr_vdd_io_reg); |
| if (ret) |
| goto vdd_reg_deinit; |
| } |
| ret = sdhci_msm_vreg_reset(pdata); |
| if (ret) |
| dev_err(dev, "vreg reset failed (%d)\n", ret); |
| goto out; |
| |
| vdd_io_reg_deinit: |
| if (curr_vdd_io_reg) |
| sdhci_msm_vreg_deinit_reg(curr_vdd_io_reg); |
| vdd_reg_deinit: |
| if (curr_vdd_reg) |
| sdhci_msm_vreg_deinit_reg(curr_vdd_reg); |
| out: |
| return ret; |
| } |
| |
| |
| static int sdhci_msm_set_vdd_io_vol(struct sdhci_msm_pltfm_data *pdata, |
| enum vdd_io_level level, |
| unsigned int voltage_level) |
| { |
| int ret = 0; |
| int set_level; |
| struct sdhci_msm_reg_data *vdd_io_reg; |
| |
| if (!pdata->vreg_data) |
| return ret; |
| |
| vdd_io_reg = pdata->vreg_data->vdd_io_data; |
| if (vdd_io_reg && vdd_io_reg->is_enabled) { |
| switch (level) { |
| case VDD_IO_LOW: |
| set_level = vdd_io_reg->low_vol_level; |
| break; |
| case VDD_IO_HIGH: |
| set_level = vdd_io_reg->high_vol_level; |
| break; |
| case VDD_IO_SET_LEVEL: |
| set_level = voltage_level; |
| break; |
| default: |
| pr_err("%s: invalid argument level = %d", |
| __func__, level); |
| ret = -EINVAL; |
| return ret; |
| } |
| ret = sdhci_msm_vreg_set_voltage(vdd_io_reg, set_level, |
| set_level); |
| } |
| return ret; |
| } |
| |
| static irqreturn_t sdhci_msm_pwr_irq(int irq, void *data) |
| { |
| struct sdhci_msm_host *msm_host = (struct sdhci_msm_host *)data; |
| u8 irq_status = 0; |
| u8 irq_ack = 0; |
| int ret = 0; |
| |
| irq_status = readb_relaxed(msm_host->core_mem + CORE_PWRCTL_STATUS); |
| pr_debug("%s: Received IRQ(%d), status=0x%x\n", |
| mmc_hostname(msm_host->mmc), irq, irq_status); |
| |
| /* Clear the interrupt */ |
| writeb_relaxed(irq_status, (msm_host->core_mem + CORE_PWRCTL_CLEAR)); |
| /* |
| * SDHC has core_mem and hc_mem device memory and these memory |
| * addresses do not fall within 1KB region. Hence, any update to |
| * core_mem address space would require an mb() to ensure this gets |
| * completed before its next update to registers within hc_mem. |
| */ |
| mb(); |
| |
| /* Handle BUS ON/OFF*/ |
| if (irq_status & CORE_PWRCTL_BUS_ON) { |
| ret = sdhci_msm_setup_vreg(msm_host->pdata, true, false); |
| if (!ret) |
| ret = sdhci_msm_setup_pins(msm_host->pdata, true); |
| if (ret) |
| irq_ack |= CORE_PWRCTL_BUS_FAIL; |
| else |
| irq_ack |= CORE_PWRCTL_BUS_SUCCESS; |
| } |
| if (irq_status & CORE_PWRCTL_BUS_OFF) { |
| ret = sdhci_msm_setup_vreg(msm_host->pdata, false, false); |
| if (!ret) |
| ret = sdhci_msm_setup_pins(msm_host->pdata, false); |
| if (ret) |
| irq_ack |= CORE_PWRCTL_BUS_FAIL; |
| else |
| irq_ack |= CORE_PWRCTL_BUS_SUCCESS; |
| } |
| /* Handle IO LOW/HIGH */ |
| if (irq_status & CORE_PWRCTL_IO_LOW) { |
| /* Switch voltage Low */ |
| ret = sdhci_msm_set_vdd_io_vol(msm_host->pdata, VDD_IO_LOW, 0); |
| if (ret) |
| irq_ack |= CORE_PWRCTL_IO_FAIL; |
| else |
| irq_ack |= CORE_PWRCTL_IO_SUCCESS; |
| } |
| if (irq_status & CORE_PWRCTL_IO_HIGH) { |
| /* Switch voltage High */ |
| ret = sdhci_msm_set_vdd_io_vol(msm_host->pdata, VDD_IO_HIGH, 0); |
| if (ret) |
| irq_ack |= CORE_PWRCTL_IO_FAIL; |
| else |
| irq_ack |= CORE_PWRCTL_IO_SUCCESS; |
| } |
| |
| /* ACK status to the core */ |
| writeb_relaxed(irq_ack, (msm_host->core_mem + CORE_PWRCTL_CTL)); |
| /* |
| * SDHC has core_mem and hc_mem device memory and these memory |
| * addresses do not fall within 1KB region. Hence, any update to |
| * core_mem address space would require an mb() to ensure this gets |
| * completed before its next update to registers within hc_mem. |
| */ |
| mb(); |
| |
| pr_debug("%s: Handled IRQ(%d), ret=%d, ack=0x%x\n", |
| mmc_hostname(msm_host->mmc), irq, ret, irq_ack); |
| wake_up_interruptible(&msm_host->pwr_irq_wait); |
| return IRQ_HANDLED; |
| } |
| |
| /* This function returns the max. current supported by VDD rail in mA */ |
| static unsigned int sdhci_msm_get_vreg_vdd_max_current(struct sdhci_msm_host |
| *host) |
| { |
| struct sdhci_msm_slot_reg_data *curr_slot = host->pdata->vreg_data; |
| if (!curr_slot) |
| return 0; |
| if (curr_slot->vdd_data) |
| return curr_slot->vdd_data->hpm_uA / 1000; |
| else |
| return 0; |
| } |
| |
| static void sdhci_msm_check_power_status(struct sdhci_host *host) |
| { |
| struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); |
| struct sdhci_msm_host *msm_host = pltfm_host->priv; |
| int ret = 0; |
| |
| pr_debug("%s: %s: power status before waiting 0x%x\n", |
| mmc_hostname(host->mmc), __func__, |
| readb_relaxed(msm_host->core_mem + CORE_PWRCTL_CTL)); |
| |
| ret = wait_event_interruptible(msm_host->pwr_irq_wait, |
| (readb_relaxed(msm_host->core_mem + |
| CORE_PWRCTL_CTL)) != 0x0); |
| if (ret) |
| pr_warning("%s: %s: returned due to error %d\n", |
| mmc_hostname(host->mmc), __func__, ret); |
| pr_debug("%s: %s: ret %d power status after handling power IRQ 0x%x\n", |
| mmc_hostname(host->mmc), __func__, ret, |
| readb_relaxed(msm_host->core_mem + CORE_PWRCTL_CTL)); |
| } |
| |
| static struct sdhci_ops sdhci_msm_ops = { |
| .check_power_status = sdhci_msm_check_power_status, |
| }; |
| |
| static int __devinit sdhci_msm_probe(struct platform_device *pdev) |
| { |
| struct sdhci_host *host; |
| struct sdhci_pltfm_host *pltfm_host; |
| struct sdhci_msm_host *msm_host; |
| struct resource *core_memres = NULL; |
| int ret = 0, pwr_irq = 0, dead = 0; |
| u32 vdd_max_current; |
| |
| pr_debug("%s: Enter %s\n", dev_name(&pdev->dev), __func__); |
| msm_host = devm_kzalloc(&pdev->dev, sizeof(struct sdhci_msm_host), |
| GFP_KERNEL); |
| if (!msm_host) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| init_waitqueue_head(&msm_host->pwr_irq_wait); |
| |
| msm_host->sdhci_msm_pdata.ops = &sdhci_msm_ops; |
| host = sdhci_pltfm_init(pdev, &msm_host->sdhci_msm_pdata); |
| if (IS_ERR(host)) { |
| ret = PTR_ERR(host); |
| goto out; |
| } |
| |
| pltfm_host = sdhci_priv(host); |
| pltfm_host->priv = msm_host; |
| msm_host->mmc = host->mmc; |
| |
| /* Extract platform data */ |
| if (pdev->dev.of_node) { |
| msm_host->pdata = sdhci_msm_populate_pdata(&pdev->dev); |
| if (!msm_host->pdata) { |
| dev_err(&pdev->dev, "DT parsing error\n"); |
| goto pltfm_free; |
| } |
| } else { |
| dev_err(&pdev->dev, "No device tree node\n"); |
| goto pltfm_free; |
| } |
| |
| /* Setup Clocks */ |
| |
| /* Setup SDCC bus voter clock. */ |
| msm_host->bus_clk = devm_clk_get(&pdev->dev, "bus_clk"); |
| if (!IS_ERR_OR_NULL(msm_host->bus_clk)) { |
| /* Vote for max. clk rate for max. performance */ |
| ret = clk_set_rate(msm_host->bus_clk, INT_MAX); |
| if (ret) |
| goto pltfm_free; |
| ret = clk_prepare_enable(msm_host->bus_clk); |
| if (ret) |
| goto pltfm_free; |
| } |
| |
| /* Setup main peripheral bus clock */ |
| msm_host->pclk = devm_clk_get(&pdev->dev, "iface_clk"); |
| if (!IS_ERR(msm_host->pclk)) { |
| ret = clk_prepare_enable(msm_host->pclk); |
| if (ret) |
| goto bus_clk_disable; |
| } |
| |
| /* Setup SDC MMC clock */ |
| msm_host->clk = devm_clk_get(&pdev->dev, "core_clk"); |
| if (IS_ERR(msm_host->clk)) { |
| ret = PTR_ERR(msm_host->clk); |
| goto pclk_disable; |
| } |
| |
| ret = clk_prepare_enable(msm_host->clk); |
| if (ret) |
| goto pclk_disable; |
| |
| /* Setup regulators */ |
| ret = sdhci_msm_vreg_init(&pdev->dev, msm_host->pdata, true); |
| if (ret) { |
| dev_err(&pdev->dev, "Regulator setup failed (%d)\n", ret); |
| goto clk_disable; |
| } |
| |
| /* Reset the core and Enable SDHC mode */ |
| core_memres = platform_get_resource_byname(pdev, |
| IORESOURCE_MEM, "core_mem"); |
| msm_host->core_mem = devm_ioremap(&pdev->dev, core_memres->start, |
| resource_size(core_memres)); |
| |
| if (!msm_host->core_mem) { |
| dev_err(&pdev->dev, "Failed to remap registers\n"); |
| ret = -ENOMEM; |
| goto vreg_deinit; |
| } |
| |
| /* Set SW_RST bit in POWER register (Offset 0x0) */ |
| writel_relaxed(CORE_SW_RST, msm_host->core_mem + CORE_POWER); |
| /* Set HC_MODE_EN bit in HC_MODE register */ |
| writel_relaxed(HC_MODE_EN, (msm_host->core_mem + CORE_HC_MODE)); |
| |
| /* |
| * Following are the deviations from SDHC spec v3.0 - |
| * 1. Card detection is handled using separate GPIO. |
| * 2. Bus power control is handled by interacting with PMIC. |
| */ |
| host->quirks |= SDHCI_QUIRK_BROKEN_CARD_DETECTION; |
| host->quirks |= SDHCI_QUIRK_SINGLE_POWER_WRITE; |
| |
| pwr_irq = platform_get_irq_byname(pdev, "pwr_irq"); |
| if (pwr_irq < 0) { |
| dev_err(&pdev->dev, "Failed to get pwr_irq by name (%d)\n", |
| pwr_irq); |
| goto vreg_deinit; |
| } |
| ret = devm_request_threaded_irq(&pdev->dev, pwr_irq, NULL, |
| sdhci_msm_pwr_irq, IRQF_ONESHOT, |
| dev_name(&pdev->dev), msm_host); |
| if (ret) { |
| dev_err(&pdev->dev, "Request threaded irq(%d) failed (%d)\n", |
| pwr_irq, ret); |
| goto vreg_deinit; |
| } |
| |
| /* Enable pwr irq interrupts */ |
| writel_relaxed(INT_MASK, (msm_host->core_mem + CORE_PWRCTL_MASK)); |
| |
| /* Set host capabilities */ |
| msm_host->mmc->caps |= msm_host->pdata->mmc_bus_width; |
| msm_host->mmc->caps |= msm_host->pdata->caps; |
| |
| vdd_max_current = sdhci_msm_get_vreg_vdd_max_current(msm_host); |
| if (vdd_max_current >= 800) |
| msm_host->mmc->caps |= MMC_CAP_MAX_CURRENT_800; |
| else if (vdd_max_current >= 600) |
| msm_host->mmc->caps |= MMC_CAP_MAX_CURRENT_600; |
| else if (vdd_max_current >= 400) |
| msm_host->mmc->caps |= MMC_CAP_MAX_CURRENT_400; |
| else |
| msm_host->mmc->caps |= MMC_CAP_MAX_CURRENT_200; |
| |
| if (vdd_max_current > 150) |
| msm_host->mmc->caps |= MMC_CAP_SET_XPC_180 | |
| MMC_CAP_SET_XPC_300| |
| MMC_CAP_SET_XPC_330; |
| |
| msm_host->mmc->caps2 |= msm_host->pdata->caps2; |
| msm_host->mmc->caps2 |= MMC_CAP2_PACKED_WR; |
| msm_host->mmc->caps2 |= MMC_CAP2_PACKED_WR_CONTROL; |
| msm_host->mmc->caps2 |= (MMC_CAP2_BOOTPART_NOACC | |
| MMC_CAP2_DETECT_ON_ERR); |
| msm_host->mmc->caps2 |= MMC_CAP2_SANITIZE; |
| msm_host->mmc->caps2 |= MMC_CAP2_CACHE_CTRL; |
| msm_host->mmc->caps2 |= MMC_CAP2_INIT_BKOPS; |
| msm_host->mmc->caps2 |= MMC_CAP2_POWEROFF_NOTIFY; |
| |
| if (msm_host->pdata->nonremovable) |
| msm_host->mmc->caps |= MMC_CAP_NONREMOVABLE; |
| |
| ret = sdhci_add_host(host); |
| if (ret) { |
| dev_err(&pdev->dev, "Add host failed (%d)\n", ret); |
| goto vreg_deinit; |
| } |
| |
| /* Set core clk rate, optionally override from dts */ |
| if (msm_host->pdata->max_clk) |
| host->max_clk = msm_host->pdata->max_clk; |
| ret = clk_set_rate(msm_host->clk, host->max_clk); |
| if (ret) { |
| dev_err(&pdev->dev, "MClk rate set failed (%d)\n", ret); |
| goto remove_host; |
| } |
| |
| /* Successful initialization */ |
| goto out; |
| |
| remove_host: |
| dead = (readl_relaxed(host->ioaddr + SDHCI_INT_STATUS) == 0xffffffff); |
| sdhci_remove_host(host, dead); |
| vreg_deinit: |
| sdhci_msm_vreg_init(&pdev->dev, msm_host->pdata, false); |
| clk_disable: |
| if (!IS_ERR(msm_host->clk)) |
| clk_disable_unprepare(msm_host->clk); |
| pclk_disable: |
| if (!IS_ERR(msm_host->pclk)) |
| clk_disable_unprepare(msm_host->pclk); |
| bus_clk_disable: |
| if (!IS_ERR_OR_NULL(msm_host->bus_clk)) |
| clk_disable_unprepare(msm_host->bus_clk); |
| pltfm_free: |
| sdhci_pltfm_free(pdev); |
| out: |
| pr_debug("%s: Exit %s\n", dev_name(&pdev->dev), __func__); |
| return ret; |
| } |
| |
| static int __devexit sdhci_msm_remove(struct platform_device *pdev) |
| { |
| struct sdhci_host *host = platform_get_drvdata(pdev); |
| struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); |
| struct sdhci_msm_host *msm_host = pltfm_host->priv; |
| struct sdhci_msm_pltfm_data *pdata = msm_host->pdata; |
| int dead = (readl_relaxed(host->ioaddr + SDHCI_INT_STATUS) == |
| 0xffffffff); |
| |
| pr_debug("%s: %s\n", dev_name(&pdev->dev), __func__); |
| sdhci_remove_host(host, dead); |
| sdhci_pltfm_free(pdev); |
| sdhci_msm_vreg_init(&pdev->dev, msm_host->pdata, false); |
| if (!IS_ERR(msm_host->clk)) |
| clk_disable_unprepare(msm_host->clk); |
| if (!IS_ERR(msm_host->pclk)) |
| clk_disable_unprepare(msm_host->pclk); |
| if (!IS_ERR_OR_NULL(msm_host->bus_clk)) |
| clk_disable_unprepare(msm_host->bus_clk); |
| if (pdata->pin_data) |
| sdhci_msm_setup_pins(pdata, false); |
| return 0; |
| } |
| |
| static const struct of_device_id sdhci_msm_dt_match[] = { |
| {.compatible = "qcom,sdhci-msm"}, |
| }; |
| MODULE_DEVICE_TABLE(of, sdhci_msm_dt_match); |
| |
| static struct platform_driver sdhci_msm_driver = { |
| .probe = sdhci_msm_probe, |
| .remove = __devexit_p(sdhci_msm_remove), |
| .driver = { |
| .name = "sdhci_msm", |
| .owner = THIS_MODULE, |
| .of_match_table = sdhci_msm_dt_match, |
| }, |
| }; |
| |
| module_platform_driver(sdhci_msm_driver); |
| |
| MODULE_DESCRIPTION("Qualcomm Secure Digital Host Controller Interface driver"); |
| MODULE_LICENSE("GPL v2"); |