blob: 27f4a99192f95010b8dbffcd4ed0dcef4fffaf46 [file] [log] [blame]
/*
* Copyright (c) 2013-2014, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
&cci {
actuator0: qcom,actuator@18 {
cell-index = <0>;
reg = <0x18>;
compatible = "qcom,actuator";
qcom,cci-master = <0>;
};
actuator1: qcom,actuator@36 {
cell-index = <1>;
reg = <0x36>;
compatible = "qcom,actuator";
qcom,cci-master = <0>;
};
qcom,camera@20 {
compatible = "qcom,imx135";
reg = <0x20>;
qcom,slave-id = <0x20 0x0016 0x0135>;
qcom,csiphy-sd-index = <0>;
qcom,csid-sd-index = <0>;
qcom,mount-angle = <90>;
qcom,sensor-name = "imx135";
qcom,vdd-cx-supply = <&pma8084_s2_corner>;
qcom,vdd-cx-name = "qcom,vdd-cx";
cam_vdig-supply = <&pma8084_l27>;
cam_vana-supply = <&pma8084_l17>;
cam_vio-supply = <&pma8084_lvs4>;
cam_vaf-supply = <&pma8084_l23>;
qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana",
"cam_vaf";
qcom,cam-vreg-type = <0 1 0 0>;
qcom,cam-vreg-min-voltage = <1050000 0 2850000 2850000>;
qcom,cam-vreg-max-voltage = <1050000 0 2850000 2850000>;
qcom,cam-vreg-op-mode = <135000 0 44000 124000>;
qcom,gpio-no-mux = <0>;
gpios = <&msmgpio 15 0>,
<&msmgpio 30 0>,
<&msmgpio 29 0>;
qcom,gpio-reset = <1>;
qcom,gpio-standby = <2>;
qcom,gpio-req-tbl-num = <0 1 2>;
qcom,gpio-req-tbl-flags = <1 0 0>;
qcom,gpio-req-tbl-label = "CAMIF_MCLK",
"CAM_RESET1",
"CAM_STANDBY";
qcom,gpio-set-tbl-num = <1 1>;
qcom,gpio-set-tbl-flags = <0 2>;
qcom,gpio-set-tbl-delay = <1000 30000>;
qcom,csi-lane-assign = <0x4320>;
qcom,csi-lane-mask = <0x1F>;
qcom,sensor-position = <0>;
qcom,sensor-mode = <0>;
qcom,sensor-type = <0>;
qcom,cci-master = <0>;
status = "ok";
};
qcom,camera@6d {
compatible = "qcom,imx132";
reg = <0x6d>;
qcom,slave-id = <0x6c 0x0 0x0132>;
qcom,csiphy-sd-index = <1>;
qcom,csid-sd-index = <1>;
qcom,mount-angle = <270>;
qcom,sensor-name = "imx132";
qcom,vdd-cx-supply = <&pma8084_s2_corner>;
qcom,vdd-cx-name = "qcom,vdd-cx";
cam_vdig-supply = <&pma8084_l3>;
cam_vana-supply = <&pma8084_l17>;
cam_vio-supply = <&pma8084_lvs4>;
qcom,cam-vreg-name = "cam_vana", "cam_vdig", "cam_vio";
qcom,cam-vreg-type = <0 0 1>;
qcom,cam-vreg-min-voltage = <2850000 1200000 0>;
qcom,cam-vreg-max-voltage = <2850000 1200000 0>;
qcom,cam-vreg-op-mode = <44000 98000 0>;
qcom,gpio-no-mux = <0>;
gpios = <&msmgpio 16 0>,
<&msmgpio 18 0>;
qcom,gpio-reset = <1>;
qcom,gpio-req-tbl-num = <0 1>;
qcom,gpio-req-tbl-flags = <1 0>;
qcom,gpio-req-tbl-label = "CAMIF_MCLK2",
"CAM_XSHUTDOWN";
qcom,gpio-set-tbl-num = <1 1>;
qcom,gpio-set-tbl-flags = <0 2>;
qcom,gpio-set-tbl-delay = <1000 4000>;
qcom,csi-lane-assign = <0x4320>;
qcom,csi-lane-mask = <0x7>;
qcom,sensor-position = <1>;
qcom,sensor-mode = <1>;
qcom,cci-master = <0>;
};
qcom,camera@0 {
cell-index = <0>;
compatible = "qcom,camera";
reg = <0x00>;
qcom,csiphy-sd-index = <0>;
qcom,csid-sd-index = <0>;
qcom,mount-angle = <90>;
qcom,vdd-cx-supply = <&pma8084_s2_corner>;
qcom,vdd-cx-name = "qcom,vdd-cx";
cam_vdig-supply = <&pma8084_l27>;
cam_vana-supply = <&pma8084_l17>;
cam_vio-supply = <&pma8084_lvs4>;
cam_vaf-supply = <&pma8084_l23>;
qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana",
"cam_vaf";
qcom,cam-vreg-type = <0 1 0 0>;
qcom,cam-vreg-min-voltage = <1050000 0 2850000 2850000>;
qcom,cam-vreg-max-voltage = <1050000 0 2850000 2850000>;
qcom,cam-vreg-op-mode = <135000 0 44000 124000>;
qcom,gpio-no-mux = <0>;
gpios = <&msmgpio 15 0>,
<&msmgpio 30 0>,
<&msmgpio 29 0>;
qcom,gpio-reset = <1>;
qcom,gpio-standby = <2>;
qcom,gpio-req-tbl-num = <0 1 2>;
qcom,gpio-req-tbl-flags = <1 0 0>;
qcom,gpio-req-tbl-label = "CAMIF_MCLK",
"CAM_RESET1",
"CAM_STANDBY";
qcom,cci-master = <0>;
status = "ok";
};
qcom,camera@1 {
cell-index = <1>;
compatible = "qcom,camera";
reg = <0x01>;
qcom,csiphy-sd-index = <1>;
qcom,csid-sd-index = <1>;
qcom,mount-angle = <270>;
qcom,vdd-cx-supply = <&pma8084_s2_corner>;
qcom,vdd-cx-name = "qcom,vdd-cx";
cam_vdig-supply = <&pma8084_l3>;
cam_vana-supply = <&pma8084_l17>;
cam_vio-supply = <&pma8084_lvs4>;
qcom,cam-vreg-name = "cam_vana", "cam_vdig", "cam_vio";
qcom,cam-vreg-type = <0 0 1>;
qcom,cam-vreg-min-voltage = <2850000 1200000 0>;
qcom,cam-vreg-max-voltage = <2850000 1200000 0>;
qcom,cam-vreg-op-mode = <44000 98000 0>;
qcom,gpio-no-mux = <0>;
gpios = <&msmgpio 16 0>,
<&msmgpio 18 0>;
qcom,gpio-reset = <1>;
qcom,gpio-req-tbl-num = <0 1>;
qcom,gpio-req-tbl-flags = <1 0>;
qcom,gpio-req-tbl-label = "CAMIF_MCLK2",
"CAM_XSHUTDOWN";
qcom,cci-master = <0>;
status = "ok";
};
};