| /* |
| * Copyright (c) 2013, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #define pr_fmt(fmt) "%s: " fmt, __func__ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/io.h> |
| #include <linux/err.h> |
| #include <linux/clk.h> |
| #include <linux/mutex.h> |
| #include <linux/delay.h> |
| #include <linux/platform_device.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/of.h> |
| |
| #include <mach/clock-generic.h> |
| #include "clock-local2.h" |
| |
| #define UPDATE_CHECK_MAX_LOOPS 200 |
| |
| struct cortex_reg_data { |
| u32 cmd_offset; |
| u32 update_mask; |
| u32 poll_mask; |
| }; |
| |
| #define DIV_REG(x) ((x)->base + (x)->div_offset) |
| #define SRC_REG(x) ((x)->base + (x)->src_offset) |
| #define CMD_REG(x) ((x)->base + \ |
| ((struct cortex_reg_data *)(x)->priv)->cmd_offset) |
| |
| static int update_config(struct mux_div_clk *md) |
| { |
| u32 regval, count; |
| struct cortex_reg_data *r = md->priv; |
| |
| /* Update the configuration */ |
| regval = readl_relaxed(CMD_REG(md)); |
| regval |= r->update_mask; |
| writel_relaxed(regval, CMD_REG(md)); |
| |
| /* Wait for update to take effect */ |
| for (count = UPDATE_CHECK_MAX_LOOPS; count > 0; count--) { |
| if (!(readl_relaxed(CMD_REG(md)) & |
| r->poll_mask)) |
| return 0; |
| udelay(1); |
| } |
| |
| CLK_WARN(&md->c, true, "didn't update its configuration."); |
| |
| return -EINVAL; |
| } |
| |
| static void cortex_get_config(struct mux_div_clk *md, u32 *src_sel, u32 *div) |
| { |
| u32 regval; |
| |
| regval = readl_relaxed(DIV_REG(md)); |
| regval &= (md->div_mask << md->div_shift); |
| *div = regval >> md->div_shift; |
| *div = max((u32)1, (*div + 1) / 2); |
| |
| regval = readl_relaxed(SRC_REG(md)); |
| regval &= (md->src_mask << md->src_shift); |
| *src_sel = regval >> md->src_shift; |
| } |
| |
| static int cortex_set_config(struct mux_div_clk *md, u32 src_sel, u32 div) |
| { |
| u32 regval; |
| |
| div = div ? ((2 * div) - 1) : 0; |
| regval = readl_relaxed(DIV_REG(md)); |
| regval &= ~(md->div_mask << md->div_shift); |
| regval |= div << md->div_shift; |
| writel_relaxed(regval, DIV_REG(md)); |
| |
| regval = readl_relaxed(SRC_REG(md)); |
| regval &= ~(md->src_mask << md->src_shift); |
| regval |= src_sel << md->src_shift; |
| writel_relaxed(regval, SRC_REG(md)); |
| |
| return update_config(md); |
| } |
| |
| static int cortex_enable(struct mux_div_clk *md) |
| { |
| u32 src_sel = parent_to_src_sel(md->parents, md->num_parents, |
| md->c.parent); |
| return cortex_set_config(md, src_sel, md->data.div); |
| } |
| |
| static void cortex_disable(struct mux_div_clk *md) |
| { |
| u32 src_sel = parent_to_src_sel(md->parents, md->num_parents, |
| md->safe_parent); |
| cortex_set_config(md, src_sel, md->safe_div); |
| } |
| |
| static bool cortex_is_enabled(struct mux_div_clk *md) |
| { |
| return true; |
| } |
| |
| struct mux_div_ops cortex_mux_div_ops = { |
| .set_src_div = cortex_set_config, |
| .get_src_div = cortex_get_config, |
| .is_enabled = cortex_is_enabled, |
| .enable = cortex_enable, |
| .disable = cortex_disable, |
| }; |
| |
| static struct cortex_reg_data a7ssmux_priv = { |
| .cmd_offset = 0x0, |
| .update_mask = BIT(0), |
| .poll_mask = BIT(0), |
| }; |
| |
| DEFINE_VDD_REGS_INIT(vdd_cpu, 1); |
| |
| static struct mux_div_clk a7ssmux = { |
| .ops = &cortex_mux_div_ops, |
| .safe_freq = 300000000, |
| .data = { |
| .max_div = 8, |
| .min_div = 1, |
| }, |
| .c = { |
| .dbg_name = "a7ssmux", |
| .ops = &clk_ops_mux_div_clk, |
| .vdd_class = &vdd_cpu, |
| CLK_INIT(a7ssmux.c), |
| }, |
| .parents = (struct clk_src[8]) {}, |
| .priv = &a7ssmux_priv, |
| .div_offset = 0x4, |
| .div_mask = BM(4, 0), |
| .div_shift = 0, |
| .src_offset = 0x4, |
| .src_mask = BM(10, 8) >> 8, |
| .src_shift = 8, |
| }; |
| |
| static struct clk_lookup clock_tbl_a7[] = { |
| CLK_LOOKUP("cpu0_clk", a7ssmux.c, "0.qcom,msm-cpufreq"), |
| CLK_LOOKUP("cpu0_clk", a7ssmux.c, "fe805664.qcom,pm-8x60"), |
| }; |
| |
| static int of_get_fmax_vdd_class(struct platform_device *pdev, struct clk *c, |
| char *prop_name) |
| { |
| struct device_node *of = pdev->dev.of_node; |
| int prop_len, i; |
| struct clk_vdd_class *vdd = c->vdd_class; |
| u32 *array; |
| |
| if (!of_find_property(of, prop_name, &prop_len)) { |
| dev_err(&pdev->dev, "missing %s\n", prop_name); |
| return -EINVAL; |
| } |
| |
| prop_len /= sizeof(u32); |
| if (prop_len % 2) { |
| dev_err(&pdev->dev, "bad length %d\n", prop_len); |
| return -EINVAL; |
| } |
| |
| prop_len /= 2; |
| vdd->level_votes = devm_kzalloc(&pdev->dev, prop_len * sizeof(int), |
| GFP_KERNEL); |
| if (!vdd->level_votes) |
| return -ENOMEM; |
| |
| vdd->vdd_uv = devm_kzalloc(&pdev->dev, prop_len * sizeof(int), |
| GFP_KERNEL); |
| if (!vdd->vdd_uv) |
| return -ENOMEM; |
| |
| c->fmax = devm_kzalloc(&pdev->dev, prop_len * sizeof(unsigned long), |
| GFP_KERNEL); |
| if (!c->fmax) |
| return -ENOMEM; |
| |
| array = devm_kzalloc(&pdev->dev, prop_len * sizeof(u32), GFP_KERNEL); |
| if (!array) |
| return -ENOMEM; |
| |
| of_property_read_u32_array(of, prop_name, array, prop_len * 2); |
| for (i = 0; i < prop_len; i++) { |
| c->fmax[i] = array[2 * i]; |
| vdd->vdd_uv[i] = array[2 * i + 1]; |
| } |
| |
| devm_kfree(&pdev->dev, array); |
| vdd->num_levels = prop_len; |
| vdd->cur_level = prop_len; |
| c->num_fmax = prop_len; |
| return 0; |
| } |
| |
| static void get_speed_bin(struct platform_device *pdev, int *bin, int *version) |
| { |
| struct resource *res; |
| void __iomem *base; |
| u32 pte_efuse, redundant_sel, valid; |
| |
| *bin = 0; |
| *version = 0; |
| |
| res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "efuse"); |
| if (!res) { |
| dev_info(&pdev->dev, |
| "No speed/PVS binning available. Defaulting to 0!\n"); |
| return; |
| } |
| |
| base = devm_ioremap(&pdev->dev, res->start, resource_size(res)); |
| if (!base) { |
| dev_warn(&pdev->dev, |
| "Unable to read efuse data. Defaulting to 0!\n"); |
| return; |
| } |
| |
| pte_efuse = readl_relaxed(base); |
| devm_iounmap(&pdev->dev, base); |
| |
| redundant_sel = (pte_efuse >> 24) & 0x7; |
| *bin = pte_efuse & 0x7; |
| valid = (pte_efuse >> 3) & 0x1; |
| *version = (pte_efuse >> 4) & 0x3; |
| |
| if (redundant_sel == 1) |
| *bin = (pte_efuse >> 27) & 0x7; |
| |
| if (!valid) { |
| dev_info(&pdev->dev, "Speed bin not set. Defaulting to 0!\n"); |
| *bin = 0; |
| } else { |
| dev_info(&pdev->dev, "Speed bin: %d\n", *bin); |
| } |
| |
| dev_info(&pdev->dev, "PVS version: %d\n", *version); |
| |
| return; |
| } |
| |
| static int of_get_clk_src(struct platform_device *pdev, struct clk_src *parents) |
| { |
| struct device_node *of = pdev->dev.of_node; |
| int num_parents, i, j, index; |
| struct clk *c; |
| char clk_name[] = "clk-x"; |
| |
| num_parents = of_property_count_strings(of, "clock-names"); |
| if (num_parents <= 0 || num_parents > 8) { |
| dev_err(&pdev->dev, "missing clock-names\n"); |
| return -EINVAL; |
| } |
| |
| j = 0; |
| for (i = 0; i < 8; i++) { |
| snprintf(clk_name, ARRAY_SIZE(clk_name), "clk-%d", i); |
| index = of_property_match_string(of, "clock-names", clk_name); |
| if (IS_ERR_VALUE(index)) |
| continue; |
| |
| parents[j].sel = i; |
| parents[j].src = c = devm_clk_get(&pdev->dev, clk_name); |
| if (IS_ERR(c)) { |
| if (c != ERR_PTR(-EPROBE_DEFER)) |
| dev_err(&pdev->dev, "clk_get: %s\n fail", |
| clk_name); |
| return PTR_ERR(c); |
| } |
| j++; |
| } |
| |
| return num_parents; |
| } |
| |
| static int clock_a7_probe(struct platform_device *pdev) |
| { |
| struct resource *res; |
| int speed_bin = 0, version = 0, rc; |
| unsigned long rate, aux_rate; |
| struct clk *aux_clk, *main_pll; |
| char prop_name[] = "qcom,speedX-bin-vX"; |
| |
| res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "rcg-base"); |
| if (!res) { |
| dev_err(&pdev->dev, "missing rcg-base\n"); |
| return -EINVAL; |
| } |
| a7ssmux.base = devm_ioremap(&pdev->dev, res->start, resource_size(res)); |
| if (!a7ssmux.base) { |
| dev_err(&pdev->dev, "ioremap failed for rcg-base\n"); |
| return -ENOMEM; |
| } |
| |
| vdd_cpu.regulator[0] = devm_regulator_get(&pdev->dev, "cpu-vdd"); |
| if (IS_ERR(vdd_cpu.regulator[0])) { |
| if (PTR_ERR(vdd_cpu.regulator[0]) != -EPROBE_DEFER) |
| dev_err(&pdev->dev, "unable to get regulator\n"); |
| return PTR_ERR(vdd_cpu.regulator[0]); |
| } |
| |
| a7ssmux.num_parents = of_get_clk_src(pdev, a7ssmux.parents); |
| if (IS_ERR_VALUE(a7ssmux.num_parents)) |
| return a7ssmux.num_parents; |
| |
| get_speed_bin(pdev, &speed_bin, &version); |
| |
| snprintf(prop_name, ARRAY_SIZE(prop_name), |
| "qcom,speed%d-bin-v%d", speed_bin, version); |
| rc = of_get_fmax_vdd_class(pdev, &a7ssmux.c, prop_name); |
| if (rc) { |
| /* Fall back to most conservative PVS table */ |
| dev_err(&pdev->dev, "Unable to load voltage plan %s!\n", |
| prop_name); |
| rc = of_get_fmax_vdd_class(pdev, &a7ssmux.c, |
| "qcom,speed0-bin-v0"); |
| if (rc) { |
| dev_err(&pdev->dev, |
| "Unable to load safe voltage plan\n"); |
| return rc; |
| } |
| dev_info(&pdev->dev, "Safe voltage plan loaded.\n"); |
| } |
| |
| rc = msm_clock_register(clock_tbl_a7, ARRAY_SIZE(clock_tbl_a7)); |
| if (rc) { |
| dev_err(&pdev->dev, "msm_clock_register failed\n"); |
| return rc; |
| } |
| |
| /* Force a PLL reconfiguration */ |
| aux_clk = a7ssmux.parents[0].src; |
| main_pll = a7ssmux.parents[1].src; |
| |
| aux_rate = clk_get_rate(aux_clk); |
| rate = clk_get_rate(&a7ssmux.c); |
| clk_set_rate(&a7ssmux.c, aux_rate); |
| clk_set_rate(main_pll, clk_round_rate(main_pll, 1)); |
| clk_set_rate(&a7ssmux.c, rate); |
| |
| /* |
| * We don't want the CPU clocks to be turned off at late init |
| * if CPUFREQ or HOTPLUG configs are disabled. So, bump up the |
| * refcount of these clocks. Any cpufreq/hotplug manager can assume |
| * that the clocks have already been prepared and enabled by the time |
| * they take over. |
| */ |
| WARN(clk_prepare_enable(&a7ssmux.c), |
| "Unable to turn on CPU clock"); |
| return 0; |
| } |
| |
| static struct of_device_id clock_a7_match_table[] = { |
| {.compatible = "qcom,clock-a7-8226"}, |
| {} |
| }; |
| |
| static struct platform_driver clock_a7_driver = { |
| .driver = { |
| .name = "clock-a7", |
| .of_match_table = clock_a7_match_table, |
| .owner = THIS_MODULE, |
| }, |
| }; |
| |
| static int __init clock_a7_init(void) |
| { |
| return platform_driver_probe(&clock_a7_driver, clock_a7_probe); |
| } |
| device_initcall(clock_a7_init); |