| menu "USB Function Support" |
| depends on !USB_GADGET |
| |
| config USB_MSM_OTG |
| bool "OTG support for Qualcomm on-chip USB controller" |
| depends on USB && USB_FUNCTION && USB_EHCI_MSM |
| help |
| USB OTG driver. |
| This driver is required if you want to use USB in |
| Host mode and Device mode. |
| |
| config USB_FUNCTION |
| boolean "Support for USB Function Drivers" |
| help |
| The USB Function framework is similar to the Gadget framework |
| but a little simpler and a little more plugable. It trades |
| some flexibility in the framework for smaller and simpler |
| function drivers that can be combined into a composite driver. |
| |
| choice |
| prompt "USB Peripheral Controller" |
| depends on USB_FUNCTION |
| help |
| USB devices interfaces with the host using a controller. |
| Many controller drivers are platform-specific; these |
| often need board-specific hooks. |
| |
| config USB_FUNCTION_MSM_HSUSB |
| boolean "MSM Highspeed USB Peripheral Controller" |
| depends on ARCH_MSM |
| help |
| High speed USB device controller for Qualcomm chipsets using |
| USB Function framework. Controller supports IAD and |
| 32 endpoints(16 IN and 16 OUT). |
| |
| endchoice |
| |
| config USB_FUNCTION_NULL |
| boolean "Null Function -- eats packets" |
| depends on USB_FUNCTION |
| depends on USB_FUNCTION_MSM_HSUSB |
| default n |
| |
| config USB_FUNCTION_ZERO |
| boolean "Zero Function -- generates packets" |
| depends on USB_FUNCTION |
| depends on USB_FUNCTION_MSM_HSUSB |
| default n |
| |
| config USB_FUNCTION_LOOPBACK |
| boolean "Loopback Function -- returns packets" |
| depends on USB_FUNCTION |
| depends on USB_FUNCTION_MSM_HSUSB |
| default n |
| |
| config USB_FUNCTION_ADB |
| tristate "ADB Transport Function" |
| depends on USB_FUNCTION |
| depends on USB_FUNCTION_MSM_HSUSB |
| help |
| Function Driver for the Android ADB Protocol |
| |
| Say "y" to link the driver statically, or "m" to build a |
| dynamically linked module called "adb" |
| |
| default USB_FUNCTION_MSM_HSUSB |
| |
| config USB_FUNCTION_UMS |
| boolean "USB Mass Storage Function (userspace)" |
| depends on USB_FUNCTION |
| depends on USB_FUNCTION_MSM_HSUSB |
| default n |
| |
| config USB_FUNCTION_MASS_STORAGE |
| tristate "USB Mass Storage Function (kernel based)" |
| depends on USB_FUNCTION |
| depends on USB_FUNCTION_MSM_HSUSB && SWITCH |
| help |
| The File-backed Storage function driver acts as a USB Mass Storage |
| disk drive. As its storage repository it can use a regular |
| file or a block device specified as a module parameter. Initial |
| driver version is derived from Gadget framework and ported to |
| Function driver framework. |
| |
| Say "y" to link the driver statically, or "m" to build a |
| dynamically linked module called "file_storage". |
| |
| default USB_FUNCTION_MSM_HSUSB |
| |
| config USB_CSW_HACK |
| boolean "USB Mass storage csw hack Feature" |
| depends on USB_FUNCTION |
| depends on USB_FUNCTION_MASS_STORAGE |
| help |
| This csw hack feature is for increasing the performance of the mass |
| storage |
| |
| default n |
| |
| config USB_FUNCTION_DIAG |
| tristate "USB MSM Diag Function" |
| depends on USB_FUNCTION |
| depends on USB_FUNCTION_MSM_HSUSB |
| help |
| Simple bridge driver between smd and debug client(host side) |
| |
| Say "y" to link the driver statically, or "m" to build a |
| dynamically linked module called "diag". |
| |
| default USB_FUNCTION_MSM_HSUSB |
| |
| config USB_FUNCTION_ETHER |
| tristate "USB Ethernet Function" |
| depends on USB_FUNCTION |
| depends on USB_FUNCTION_MSM_HSUSB |
| help |
| Implements the Ethernet style communication using CDC/ECM. |
| |
| Say "y" to link the driver statically, or "m" to build a |
| dynamically linked module called "ether". |
| |
| default USB_FUNCTION_MSM_HSUSB |
| |
| config USB_FUNCTION_SERIAL |
| tristate "USB Serial Function" |
| depends on USB_FUNCTION |
| depends on USB_FUNCTION_MSM_HSUSB |
| help |
| Implements serial communication using single interface; uses |
| two endpoints(bulk-in and bulk out) for data transfer and a |
| interrupt endpoint for control data transfer. |
| |
| Say "y" to link the driver statically, or "m" to build a |
| dynamically linked module called "serial". |
| |
| default USB_FUNCTION_MSM_HSUSB |
| |
| config USB_FUNCTION_RMNET |
| bool "RmNet function driver" |
| depends on USB_FUNCTION |
| depends on USB_FUNCTION_MSM_HSUSB |
| default n |
| help |
| Implements Rmnet function. |
| Rmnet is an alternative to CDC-ECM and Windows RNDIS. It uses |
| QUALCOMM MSM Interface for control transfers. It acts like a |
| bridge between Host and modem found in MSM chipsets. |
| |
| config RMNET_SMD_CTL_CHANNEL |
| string "control SMD channel name" |
| depends on USB_FUNCTION_RMNET |
| default "" |
| help |
| Control SMD channel for transferring QMI messages |
| |
| config RMNET_SMD_DATA_CHANNEL |
| string "Data SMD channel name" |
| depends on USB_FUNCTION_RMNET |
| default "" |
| help |
| Data SMD channel for transferring network data |
| |
| endmenu |