| /* Copyright (c) 2012-2013, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/interrupt.h> |
| #include <linux/spinlock.h> |
| #include <linux/delay.h> |
| #include <linux/io.h> |
| #include <linux/of_device.h> |
| #include <linux/of_gpio.h> |
| #include <linux/gpio.h> |
| #include <linux/err.h> |
| #include <linux/regulator/consumer.h> |
| |
| #include "mdss.h" |
| #include "mdss_panel.h" |
| #include "mdss_dsi.h" |
| #include "mdss_debug.h" |
| |
| static unsigned char *mdss_dsi_base; |
| |
| static int mdss_dsi_regulator_init(struct platform_device *pdev) |
| { |
| struct mdss_dsi_ctrl_pdata *ctrl_pdata = NULL; |
| |
| if (!pdev) { |
| pr_err("%s: invalid input\n", __func__); |
| return -EINVAL; |
| } |
| |
| ctrl_pdata = platform_get_drvdata(pdev); |
| if (!ctrl_pdata) { |
| pr_err("%s: invalid driver data\n", __func__); |
| return -EINVAL; |
| } |
| |
| return msm_dss_config_vreg(&pdev->dev, |
| ctrl_pdata->power_data.vreg_config, |
| ctrl_pdata->power_data.num_vreg, 1); |
| } |
| |
| static int mdss_dsi_panel_power_on(struct mdss_panel_data *pdata, int enable) |
| { |
| int ret; |
| struct mdss_dsi_ctrl_pdata *ctrl_pdata = NULL; |
| |
| if (pdata == NULL) { |
| pr_err("%s: Invalid input data\n", __func__); |
| ret = -EINVAL; |
| goto error; |
| } |
| |
| ctrl_pdata = container_of(pdata, struct mdss_dsi_ctrl_pdata, |
| panel_data); |
| pr_debug("%s: enable=%d\n", __func__, enable); |
| |
| if (enable) { |
| ret = msm_dss_enable_vreg( |
| ctrl_pdata->power_data.vreg_config, |
| ctrl_pdata->power_data.num_vreg, 1); |
| if (ret) { |
| pr_err("%s:Failed to enable vregs.rc=%d\n", |
| __func__, ret); |
| goto error; |
| } |
| |
| if (pdata->panel_info.panel_power_on == 0) |
| mdss_dsi_panel_reset(pdata, 1); |
| |
| } else { |
| |
| mdss_dsi_panel_reset(pdata, 0); |
| |
| ret = msm_dss_enable_vreg( |
| ctrl_pdata->power_data.vreg_config, |
| ctrl_pdata->power_data.num_vreg, 0); |
| if (ret) { |
| pr_err("%s: Failed to disable vregs.rc=%d\n", |
| __func__, ret); |
| } |
| } |
| error: |
| return ret; |
| } |
| |
| static void mdss_dsi_put_dt_vreg_data(struct device *dev, |
| struct dss_module_power *module_power) |
| { |
| if (!module_power) { |
| pr_err("%s: invalid input\n", __func__); |
| return; |
| } |
| |
| if (module_power->vreg_config) { |
| devm_kfree(dev, module_power->vreg_config); |
| module_power->vreg_config = NULL; |
| } |
| module_power->num_vreg = 0; |
| } |
| |
| static int mdss_dsi_get_dt_vreg_data(struct device *dev, |
| struct dss_module_power *mp) |
| { |
| int i = 0, rc = 0; |
| u32 tmp = 0; |
| struct device_node *of_node = NULL, *supply_node = NULL; |
| |
| if (!dev || !mp) { |
| pr_err("%s: invalid input\n", __func__); |
| rc = -EINVAL; |
| goto error; |
| } |
| |
| of_node = dev->of_node; |
| |
| mp->num_vreg = 0; |
| for_each_child_of_node(of_node, supply_node) { |
| if (!strncmp(supply_node->name, "qcom,platform-supply-entry", |
| 26)) |
| ++mp->num_vreg; |
| } |
| if (mp->num_vreg == 0) { |
| pr_debug("%s: no vreg\n", __func__); |
| goto novreg; |
| } else { |
| pr_debug("%s: vreg found. count=%d\n", __func__, mp->num_vreg); |
| } |
| |
| mp->vreg_config = devm_kzalloc(dev, sizeof(struct dss_vreg) * |
| mp->num_vreg, GFP_KERNEL); |
| if (!mp->vreg_config) { |
| pr_err("%s: can't alloc vreg mem\n", __func__); |
| rc = -ENOMEM; |
| goto error; |
| } |
| |
| for_each_child_of_node(of_node, supply_node) { |
| if (!strncmp(supply_node->name, "qcom,platform-supply-entry", |
| 26)) { |
| const char *st = NULL; |
| /* vreg-name */ |
| rc = of_property_read_string(supply_node, |
| "qcom,supply-name", &st); |
| if (rc) { |
| pr_err("%s: error reading name. rc=%d\n", |
| __func__, rc); |
| goto error; |
| } |
| snprintf(mp->vreg_config[i].vreg_name, |
| ARRAY_SIZE((mp->vreg_config[i].vreg_name)), |
| "%s", st); |
| /* vreg-min-voltage */ |
| rc = of_property_read_u32(supply_node, |
| "qcom,supply-min-voltage", &tmp); |
| if (rc) { |
| pr_err("%s: error reading min volt. rc=%d\n", |
| __func__, rc); |
| goto error; |
| } |
| mp->vreg_config[i].min_voltage = tmp; |
| |
| /* vreg-max-voltage */ |
| rc = of_property_read_u32(supply_node, |
| "qcom,supply-max-voltage", &tmp); |
| if (rc) { |
| pr_err("%s: error reading max volt. rc=%d\n", |
| __func__, rc); |
| goto error; |
| } |
| mp->vreg_config[i].max_voltage = tmp; |
| |
| /* enable-load */ |
| rc = of_property_read_u32(supply_node, |
| "qcom,supply-enable-load", &tmp); |
| if (rc) { |
| pr_err("%s: error reading enable load. rc=%d\n", |
| __func__, rc); |
| goto error; |
| } |
| mp->vreg_config[i].enable_load = tmp; |
| |
| /* disable-load */ |
| rc = of_property_read_u32(supply_node, |
| "qcom,supply-disable-load", &tmp); |
| if (rc) { |
| pr_err("%s: error reading disable load. rc=%d\n", |
| __func__, rc); |
| goto error; |
| } |
| mp->vreg_config[i].disable_load = tmp; |
| |
| /* pre-sleep */ |
| rc = of_property_read_u32(supply_node, |
| "qcom,supply-pre-on-sleep", &tmp); |
| if (rc) { |
| pr_debug("%s: error reading supply pre sleep value. rc=%d\n", |
| __func__, rc); |
| } |
| mp->vreg_config[i].pre_on_sleep = (!rc ? tmp : 0); |
| |
| rc = of_property_read_u32(supply_node, |
| "qcom,supply-pre-off-sleep", &tmp); |
| if (rc) { |
| pr_debug("%s: error reading supply pre sleep value. rc=%d\n", |
| __func__, rc); |
| } |
| mp->vreg_config[i].pre_off_sleep = (!rc ? tmp : 0); |
| |
| /* post-sleep */ |
| rc = of_property_read_u32(supply_node, |
| "qcom,supply-post-on-sleep", &tmp); |
| if (rc) { |
| pr_debug("%s: error reading supply post sleep value. rc=%d\n", |
| __func__, rc); |
| } |
| mp->vreg_config[i].post_on_sleep = (!rc ? tmp : 0); |
| |
| rc = of_property_read_u32(supply_node, |
| "qcom,supply-post-off-sleep", &tmp); |
| if (rc) { |
| pr_debug("%s: error reading supply post sleep value. rc=%d\n", |
| __func__, rc); |
| } |
| mp->vreg_config[i].post_off_sleep = (!rc ? tmp : 0); |
| |
| pr_debug("%s: %s min=%d, max=%d, enable=%d, disable=%d, preonsleep=%d, postonsleep=%d, preoffsleep=%d, postoffsleep=%d\n", |
| __func__, |
| mp->vreg_config[i].vreg_name, |
| mp->vreg_config[i].min_voltage, |
| mp->vreg_config[i].max_voltage, |
| mp->vreg_config[i].enable_load, |
| mp->vreg_config[i].disable_load, |
| mp->vreg_config[i].pre_on_sleep, |
| mp->vreg_config[i].post_on_sleep, |
| mp->vreg_config[i].pre_off_sleep, |
| mp->vreg_config[i].post_off_sleep |
| ); |
| ++i; |
| } |
| } |
| |
| return rc; |
| |
| error: |
| if (mp->vreg_config) { |
| devm_kfree(dev, mp->vreg_config); |
| mp->vreg_config = NULL; |
| } |
| novreg: |
| mp->num_vreg = 0; |
| |
| return rc; |
| } |
| |
| static int mdss_dsi_get_panel_cfg(char *panel_cfg) |
| { |
| int rc; |
| struct mdss_panel_cfg *pan_cfg = NULL; |
| |
| if (!panel_cfg) |
| return MDSS_PANEL_INTF_INVALID; |
| |
| pan_cfg = mdss_panel_intf_type(MDSS_PANEL_INTF_DSI); |
| if (IS_ERR(pan_cfg)) { |
| return PTR_ERR(pan_cfg); |
| } else if (!pan_cfg) { |
| panel_cfg[0] = 0; |
| return 0; |
| } |
| |
| pr_debug("%s:%d: cfg:[%s]\n", __func__, __LINE__, |
| pan_cfg->arg_cfg); |
| rc = strlcpy(panel_cfg, pan_cfg->arg_cfg, |
| sizeof(pan_cfg->arg_cfg)); |
| return rc; |
| } |
| |
| static int mdss_dsi_off(struct mdss_panel_data *pdata) |
| { |
| int ret = 0; |
| struct mdss_dsi_ctrl_pdata *ctrl_pdata = NULL; |
| struct mdss_panel_info *panel_info = NULL; |
| |
| if (pdata == NULL) { |
| pr_err("%s: Invalid input data\n", __func__); |
| return -EINVAL; |
| } |
| |
| if (!pdata->panel_info.panel_power_on) { |
| pr_warn("%s:%d Panel already off.\n", __func__, __LINE__); |
| return -EPERM; |
| } |
| |
| pdata->panel_info.panel_power_on = 0; |
| |
| ctrl_pdata = container_of(pdata, struct mdss_dsi_ctrl_pdata, |
| panel_data); |
| |
| panel_info = &ctrl_pdata->panel_data.panel_info; |
| pr_debug("%s+: ctrl=%p ndx=%d\n", __func__, |
| ctrl_pdata, ctrl_pdata->ndx); |
| |
| if (pdata->panel_info.type == MIPI_CMD_PANEL) |
| mdss_dsi_clk_ctrl(ctrl_pdata, 1); |
| |
| /* disable DSI controller */ |
| mdss_dsi_controller_cfg(0, pdata); |
| |
| mdss_dsi_clk_ctrl(ctrl_pdata, 0); |
| |
| ret = mdss_dsi_enable_bus_clocks(ctrl_pdata); |
| if (ret) { |
| pr_err("%s: failed to enable bus clocks. rc=%d\n", __func__, |
| ret); |
| mdss_dsi_panel_power_on(pdata, 0); |
| return ret; |
| } |
| |
| /* disable DSI phy */ |
| mdss_dsi_phy_enable(ctrl_pdata, 0); |
| |
| mdss_dsi_disable_bus_clocks(ctrl_pdata); |
| |
| ret = mdss_dsi_panel_power_on(pdata, 0); |
| if (ret) { |
| pr_err("%s: Panel power off failed\n", __func__); |
| return ret; |
| } |
| |
| if (panel_info->dynamic_fps |
| && (panel_info->dfps_update == DFPS_SUSPEND_RESUME_MODE) |
| && (panel_info->new_fps != panel_info->mipi.frame_rate)) |
| panel_info->mipi.frame_rate = panel_info->new_fps; |
| |
| pr_debug("%s-:\n", __func__); |
| |
| return ret; |
| } |
| |
| int mdss_dsi_on(struct mdss_panel_data *pdata) |
| { |
| int ret = 0; |
| u32 clk_rate; |
| struct mdss_panel_info *pinfo; |
| struct mipi_panel_info *mipi; |
| u32 hbp, hfp, vbp, vfp, hspw, vspw, width, height; |
| u32 ystride, bpp, data, dst_bpp; |
| u32 dummy_xres, dummy_yres; |
| struct mdss_dsi_ctrl_pdata *ctrl_pdata = NULL; |
| u32 hsync_period, vsync_period; |
| |
| if (pdata == NULL) { |
| pr_err("%s: Invalid input data\n", __func__); |
| return -EINVAL; |
| } |
| |
| if (pdata->panel_info.panel_power_on) { |
| pr_warn("%s:%d Panel already on.\n", __func__, __LINE__); |
| return 0; |
| } |
| |
| ctrl_pdata = container_of(pdata, struct mdss_dsi_ctrl_pdata, |
| panel_data); |
| |
| pr_debug("%s+: ctrl=%p ndx=%d\n", |
| __func__, ctrl_pdata, ctrl_pdata->ndx); |
| |
| pinfo = &pdata->panel_info; |
| |
| ret = mdss_dsi_panel_power_on(pdata, 1); |
| if (ret) { |
| pr_err("%s: Panel power on failed\n", __func__); |
| return ret; |
| } |
| |
| pdata->panel_info.panel_power_on = 1; |
| |
| ret = mdss_dsi_enable_bus_clocks(ctrl_pdata); |
| if (ret) { |
| pr_err("%s: failed to enable bus clocks. rc=%d\n", __func__, |
| ret); |
| mdss_dsi_panel_power_on(pdata, 0); |
| return ret; |
| } |
| |
| mdss_dsi_phy_sw_reset((ctrl_pdata->ctrl_base)); |
| mdss_dsi_phy_init(pdata); |
| mdss_dsi_disable_bus_clocks(ctrl_pdata); |
| |
| mdss_dsi_clk_ctrl(ctrl_pdata, 1); |
| |
| clk_rate = pdata->panel_info.clk_rate; |
| clk_rate = min(clk_rate, pdata->panel_info.clk_max); |
| |
| dst_bpp = pdata->panel_info.fbc.enabled ? |
| (pdata->panel_info.fbc.target_bpp) : (pinfo->bpp); |
| |
| hbp = mult_frac(pdata->panel_info.lcdc.h_back_porch, dst_bpp, |
| pdata->panel_info.bpp); |
| hfp = mult_frac(pdata->panel_info.lcdc.h_front_porch, dst_bpp, |
| pdata->panel_info.bpp); |
| vbp = mult_frac(pdata->panel_info.lcdc.v_back_porch, dst_bpp, |
| pdata->panel_info.bpp); |
| vfp = mult_frac(pdata->panel_info.lcdc.v_front_porch, dst_bpp, |
| pdata->panel_info.bpp); |
| hspw = mult_frac(pdata->panel_info.lcdc.h_pulse_width, dst_bpp, |
| pdata->panel_info.bpp); |
| vspw = pdata->panel_info.lcdc.v_pulse_width; |
| width = mult_frac(pdata->panel_info.xres, dst_bpp, |
| pdata->panel_info.bpp); |
| height = pdata->panel_info.yres; |
| |
| if (pdata->panel_info.type == MIPI_VIDEO_PANEL) { |
| dummy_xres = pdata->panel_info.lcdc.xres_pad; |
| dummy_yres = pdata->panel_info.lcdc.yres_pad; |
| } |
| |
| vsync_period = vspw + vbp + height + dummy_yres + vfp; |
| hsync_period = hspw + hbp + width + dummy_xres + hfp; |
| |
| mipi = &pdata->panel_info.mipi; |
| if (pdata->panel_info.type == MIPI_VIDEO_PANEL) { |
| MIPI_OUTP((ctrl_pdata->ctrl_base) + 0x24, |
| ((hspw + hbp + width + dummy_xres) << 16 | |
| (hspw + hbp))); |
| MIPI_OUTP((ctrl_pdata->ctrl_base) + 0x28, |
| ((vspw + vbp + height + dummy_yres) << 16 | |
| (vspw + vbp))); |
| MIPI_OUTP((ctrl_pdata->ctrl_base) + 0x2C, |
| ((vsync_period - 1) << 16) |
| | (hsync_period - 1)); |
| |
| MIPI_OUTP((ctrl_pdata->ctrl_base) + 0x30, (hspw << 16)); |
| MIPI_OUTP((ctrl_pdata->ctrl_base) + 0x34, 0); |
| MIPI_OUTP((ctrl_pdata->ctrl_base) + 0x38, (vspw << 16)); |
| |
| } else { /* command mode */ |
| if (mipi->dst_format == DSI_CMD_DST_FORMAT_RGB888) |
| bpp = 3; |
| else if (mipi->dst_format == DSI_CMD_DST_FORMAT_RGB666) |
| bpp = 3; |
| else if (mipi->dst_format == DSI_CMD_DST_FORMAT_RGB565) |
| bpp = 2; |
| else |
| bpp = 3; /* Default format set to RGB888 */ |
| |
| ystride = width * bpp + 1; |
| |
| /* DSI_COMMAND_MODE_MDP_STREAM_CTRL */ |
| data = (ystride << 16) | (mipi->vc << 8) | DTYPE_DCS_LWRITE; |
| MIPI_OUTP((ctrl_pdata->ctrl_base) + 0x60, data); |
| MIPI_OUTP((ctrl_pdata->ctrl_base) + 0x58, data); |
| |
| /* DSI_COMMAND_MODE_MDP_STREAM_TOTAL */ |
| data = height << 16 | width; |
| MIPI_OUTP((ctrl_pdata->ctrl_base) + 0x64, data); |
| MIPI_OUTP((ctrl_pdata->ctrl_base) + 0x5C, data); |
| } |
| |
| mdss_dsi_sw_reset(pdata); |
| mdss_dsi_host_init(mipi, pdata); |
| |
| if (mipi->force_clk_lane_hs) { |
| u32 tmp; |
| |
| tmp = MIPI_INP((ctrl_pdata->ctrl_base) + 0xac); |
| tmp |= (1<<28); |
| MIPI_OUTP((ctrl_pdata->ctrl_base) + 0xac, tmp); |
| wmb(); |
| } |
| |
| if (pdata->panel_info.type == MIPI_CMD_PANEL) |
| mdss_dsi_clk_ctrl(ctrl_pdata, 0); |
| |
| pr_debug("%s-:\n", __func__); |
| return 0; |
| } |
| |
| static int mdss_dsi_unblank(struct mdss_panel_data *pdata) |
| { |
| int ret = 0; |
| struct mipi_panel_info *mipi; |
| struct mdss_dsi_ctrl_pdata *ctrl_pdata = NULL; |
| |
| pr_debug("%s+:\n", __func__); |
| |
| if (pdata == NULL) { |
| pr_err("%s: Invalid input data\n", __func__); |
| return -EINVAL; |
| } |
| |
| ctrl_pdata = container_of(pdata, struct mdss_dsi_ctrl_pdata, |
| panel_data); |
| mipi = &pdata->panel_info.mipi; |
| |
| if (!(ctrl_pdata->ctrl_state & CTRL_STATE_PANEL_INIT)) { |
| ret = ctrl_pdata->on(pdata); |
| if (ret) { |
| pr_err("%s: unable to initialize the panel\n", |
| __func__); |
| return ret; |
| } |
| ctrl_pdata->ctrl_state |= CTRL_STATE_PANEL_INIT; |
| } |
| |
| if (pdata->panel_info.type == MIPI_CMD_PANEL) { |
| if (mipi->vsync_enable && mipi->hw_vsync_mode |
| && gpio_is_valid(ctrl_pdata->disp_te_gpio)) { |
| mdss_dsi_set_tear_on(ctrl_pdata); |
| } |
| } |
| |
| pr_debug("%s-:\n", __func__); |
| |
| return ret; |
| } |
| |
| static int mdss_dsi_blank(struct mdss_panel_data *pdata) |
| { |
| int ret = 0; |
| struct mipi_panel_info *mipi; |
| struct mdss_dsi_ctrl_pdata *ctrl_pdata = NULL; |
| |
| pr_debug("%s+:\n", __func__); |
| |
| if (pdata == NULL) { |
| pr_err("%s: Invalid input data\n", __func__); |
| return -EINVAL; |
| } |
| |
| ctrl_pdata = container_of(pdata, struct mdss_dsi_ctrl_pdata, |
| panel_data); |
| mipi = &pdata->panel_info.mipi; |
| |
| mdss_dsi_op_mode_config(DSI_CMD_MODE, pdata); |
| |
| if (pdata->panel_info.type == MIPI_CMD_PANEL) { |
| if (mipi->vsync_enable && mipi->hw_vsync_mode |
| && gpio_is_valid(ctrl_pdata->disp_te_gpio)) { |
| mdss_dsi_set_tear_off(ctrl_pdata); |
| } |
| } |
| |
| if (ctrl_pdata->ctrl_state & CTRL_STATE_PANEL_INIT) { |
| ret = ctrl_pdata->off(pdata); |
| if (ret) { |
| pr_err("%s: Panel OFF failed\n", __func__); |
| return ret; |
| } |
| ctrl_pdata->ctrl_state &= ~CTRL_STATE_PANEL_INIT; |
| } |
| pr_debug("%s-:End\n", __func__); |
| return ret; |
| } |
| |
| int mdss_dsi_cont_splash_on(struct mdss_panel_data *pdata) |
| { |
| int ret = 0; |
| struct mipi_panel_info *mipi; |
| struct mdss_dsi_ctrl_pdata *ctrl_pdata = NULL; |
| |
| pr_info("%s:%d DSI on for continuous splash.\n", __func__, __LINE__); |
| |
| if (pdata == NULL) { |
| pr_err("%s: Invalid input data\n", __func__); |
| return -EINVAL; |
| } |
| |
| mipi = &pdata->panel_info.mipi; |
| |
| ctrl_pdata = container_of(pdata, struct mdss_dsi_ctrl_pdata, |
| panel_data); |
| |
| pr_debug("%s+: ctrl=%p ndx=%d\n", __func__, |
| ctrl_pdata, ctrl_pdata->ndx); |
| |
| WARN((ctrl_pdata->ctrl_state & CTRL_STATE_PANEL_INIT), |
| "Incorrect Ctrl state=0x%x\n", ctrl_pdata->ctrl_state); |
| |
| mdss_dsi_sw_reset(pdata); |
| mdss_dsi_host_init(mipi, pdata); |
| mdss_dsi_op_mode_config(mipi->mode, pdata); |
| |
| if (ctrl_pdata->on_cmds.link_state == DSI_LP_MODE) { |
| ret = mdss_dsi_unblank(pdata); |
| if (ret) { |
| pr_err("%s: unblank failed\n", __func__); |
| return ret; |
| } |
| } |
| |
| pr_debug("%s-:End\n", __func__); |
| return ret; |
| } |
| |
| static int mdss_dsi_dfps_config(struct mdss_panel_data *pdata, int new_fps) |
| { |
| int rc = 0; |
| struct mdss_dsi_ctrl_pdata *ctrl_pdata = NULL; |
| u32 dsi_ctrl; |
| |
| pr_debug("%s+:\n", __func__); |
| |
| if (pdata == NULL) { |
| pr_err("%s: Invalid input data\n", __func__); |
| return -EINVAL; |
| } |
| |
| ctrl_pdata = container_of(pdata, struct mdss_dsi_ctrl_pdata, |
| panel_data); |
| |
| if (!ctrl_pdata->panel_data.panel_info.dynamic_fps) { |
| pr_err("%s: Dynamic fps not enabled for this panel\n", |
| __func__); |
| return -EINVAL; |
| } |
| |
| if (new_fps != |
| ctrl_pdata->panel_data.panel_info.mipi.frame_rate) { |
| rc = mdss_dsi_clk_div_config |
| (&ctrl_pdata->panel_data.panel_info, new_fps); |
| if (rc) { |
| pr_err("%s: unable to initialize the clk dividers\n", |
| __func__); |
| return rc; |
| } |
| ctrl_pdata->pclk_rate = |
| ctrl_pdata->panel_data.panel_info.mipi.dsi_pclk_rate; |
| ctrl_pdata->byte_clk_rate = |
| ctrl_pdata->panel_data.panel_info.clk_rate / 8; |
| |
| if (pdata->panel_info.dfps_update |
| == DFPS_IMMEDIATE_CLK_UPDATE_MODE) { |
| dsi_ctrl = MIPI_INP((ctrl_pdata->ctrl_base) + |
| 0x0004); |
| ctrl_pdata->panel_data.panel_info.mipi.frame_rate = |
| new_fps; |
| dsi_ctrl &= ~0x2; |
| MIPI_OUTP((ctrl_pdata->ctrl_base) + 0x0004, |
| dsi_ctrl); |
| mdss_dsi_controller_cfg(true, pdata); |
| mdss_dsi_clk_ctrl(ctrl_pdata, 0); |
| mdss_dsi_clk_ctrl(ctrl_pdata, 1); |
| dsi_ctrl |= 0x2; |
| MIPI_OUTP((ctrl_pdata->ctrl_base) + 0x0004, |
| dsi_ctrl); |
| } |
| } else { |
| pr_debug("%s: Panel is already at this FPS\n", __func__); |
| } |
| |
| return rc; |
| } |
| |
| static int mdss_dsi_ctl_partial_update(struct mdss_panel_data *pdata) |
| { |
| int rc = -EINVAL; |
| u32 data; |
| struct mdss_dsi_ctrl_pdata *ctrl_pdata = NULL; |
| |
| if (pdata == NULL) { |
| pr_err("%s: Invalid input data\n", __func__); |
| return -EINVAL; |
| } |
| |
| ctrl_pdata = container_of(pdata, struct mdss_dsi_ctrl_pdata, |
| panel_data); |
| |
| /* DSI_COMMAND_MODE_MDP_STREAM_CTRL */ |
| data = (((pdata->panel_info.roi_w * 3) + 1) << 16) | |
| (pdata->panel_info.mipi.vc << 8) | DTYPE_DCS_LWRITE; |
| MIPI_OUTP((ctrl_pdata->ctrl_base) + 0x60, data); |
| MIPI_OUTP((ctrl_pdata->ctrl_base) + 0x58, data); |
| |
| /* DSI_COMMAND_MODE_MDP_STREAM_TOTAL */ |
| data = pdata->panel_info.roi_h << 16 | pdata->panel_info.roi_w; |
| MIPI_OUTP((ctrl_pdata->ctrl_base) + 0x64, data); |
| MIPI_OUTP((ctrl_pdata->ctrl_base) + 0x5C, data); |
| |
| if (ctrl_pdata->partial_update_fnc) |
| rc = ctrl_pdata->partial_update_fnc(pdata); |
| |
| if (rc) { |
| pr_err("%s: unable to initialize the panel\n", |
| __func__); |
| return rc; |
| } |
| |
| return rc; |
| } |
| |
| static int mdss_dsi_event_handler(struct mdss_panel_data *pdata, |
| int event, void *arg) |
| { |
| int rc = 0; |
| struct mdss_dsi_ctrl_pdata *ctrl_pdata = NULL; |
| |
| if (pdata == NULL) { |
| pr_err("%s: Invalid input data\n", __func__); |
| return -EINVAL; |
| } |
| ctrl_pdata = container_of(pdata, struct mdss_dsi_ctrl_pdata, |
| panel_data); |
| pr_debug("%s+:event=%d\n", __func__, event); |
| |
| switch (event) { |
| case MDSS_EVENT_UNBLANK: |
| rc = mdss_dsi_on(pdata); |
| mdss_dsi_op_mode_config(pdata->panel_info.mipi.mode, |
| pdata); |
| if (ctrl_pdata->on_cmds.link_state == DSI_LP_MODE) |
| rc = mdss_dsi_unblank(pdata); |
| break; |
| case MDSS_EVENT_PANEL_ON: |
| ctrl_pdata->ctrl_state |= CTRL_STATE_MDP_ACTIVE; |
| if (ctrl_pdata->on_cmds.link_state == DSI_HS_MODE) |
| rc = mdss_dsi_unblank(pdata); |
| break; |
| case MDSS_EVENT_BLANK: |
| if (ctrl_pdata->off_cmds.link_state == DSI_HS_MODE) |
| rc = mdss_dsi_blank(pdata); |
| break; |
| case MDSS_EVENT_PANEL_OFF: |
| ctrl_pdata->ctrl_state &= ~CTRL_STATE_MDP_ACTIVE; |
| if (ctrl_pdata->off_cmds.link_state == DSI_LP_MODE) |
| rc = mdss_dsi_blank(pdata); |
| rc = mdss_dsi_off(pdata); |
| break; |
| case MDSS_EVENT_CONT_SPLASH_FINISH: |
| ctrl_pdata->ctrl_state &= ~CTRL_STATE_MDP_ACTIVE; |
| if (ctrl_pdata->on_cmds.link_state == DSI_LP_MODE) { |
| rc = mdss_dsi_cont_splash_on(pdata); |
| } else { |
| pr_debug("%s:event=%d, Dsi On not called: ctrl_state: %d\n", |
| __func__, event, |
| ctrl_pdata->on_cmds.link_state); |
| rc = -EINVAL; |
| } |
| break; |
| case MDSS_EVENT_PANEL_CLK_CTRL: |
| mdss_dsi_clk_req(ctrl_pdata, (int)arg); |
| break; |
| case MDSS_EVENT_DSI_CMDLIST_KOFF: |
| mdss_dsi_cmdlist_commit(ctrl_pdata, 1); |
| case MDSS_EVENT_PANEL_UPDATE_FPS: |
| if (arg != NULL) { |
| rc = mdss_dsi_dfps_config(pdata, (int)arg); |
| pr_debug("%s:update fps to = %d\n", |
| __func__, (int)arg); |
| } |
| break; |
| case MDSS_EVENT_CONT_SPLASH_BEGIN: |
| if (ctrl_pdata->off_cmds.link_state == DSI_HS_MODE) { |
| /* Panel is Enabled in Bootloader */ |
| rc = mdss_dsi_blank(pdata); |
| } |
| break; |
| case MDSS_EVENT_ENABLE_PARTIAL_UPDATE: |
| rc = mdss_dsi_ctl_partial_update(pdata); |
| break; |
| default: |
| pr_debug("%s: unhandled event=%d\n", __func__, event); |
| break; |
| } |
| pr_debug("%s-:event=%d, rc=%d\n", __func__, event, rc); |
| return rc; |
| } |
| |
| /** |
| * mdss_dsi_find_panel_of_node(): find device node of dsi panel |
| * @pdev: platform_device of the dsi ctrl node |
| * @panel_cfg: string containing intf specific config data |
| * |
| * Function finds the panel device node using the interface |
| * specific configuration data. This configuration data is |
| * could be derived from the result of bootloader's GCDB |
| * panel detection mechanism. If such config data doesn't |
| * exist then this panel returns the default panel configured |
| * in the device tree. |
| * |
| * returns pointer to panel node on success, NULL on error. |
| */ |
| static struct device_node *mdss_dsi_find_panel_of_node( |
| struct platform_device *pdev, char *panel_cfg) |
| { |
| int l; |
| int ctrl_id = -1; |
| char *panel_name; |
| struct device_node *dsi_pan_node = NULL, *mdss_node = NULL; |
| |
| l = strlen(panel_cfg); |
| if (!l) { |
| /* no panel cfg chg, parse dt */ |
| pr_debug("%s:%d: no cmd line cfg present\n", |
| __func__, __LINE__); |
| dsi_pan_node = of_parse_phandle( |
| pdev->dev.of_node, |
| "qcom,dsi-pref-prim-pan", 0); |
| if (!dsi_pan_node) { |
| pr_err("%s:can't find panel phandle\n", |
| __func__); |
| return NULL; |
| } |
| } else { |
| if (panel_cfg[0] == '0') { |
| pr_debug("%s:%d: DSI ctrl 1\n", __func__, __LINE__); |
| ctrl_id = 0; |
| } else if (panel_cfg[0] == '1') { |
| pr_debug("%s:%d: DSI ctrl 2\n", __func__, __LINE__); |
| ctrl_id = 1; |
| } |
| if ((pdev->id - 1) != ctrl_id) { |
| pr_err("%s:%d:pdev_ID=[%d]\n", |
| __func__, __LINE__, pdev->id); |
| return NULL; |
| } |
| /* |
| * skip first two chars '<dsi_ctrl_id>' and |
| * ':' to get to the panel name |
| */ |
| panel_name = panel_cfg + 2; |
| pr_debug("%s:%d:%s:%s\n", __func__, __LINE__, |
| panel_cfg, panel_name); |
| |
| mdss_node = of_parse_phandle(pdev->dev.of_node, |
| "qcom,mdss-mdp", 0); |
| |
| if (!mdss_node) { |
| pr_err("%s: %d: mdss_node null\n", |
| __func__, __LINE__); |
| return NULL; |
| } |
| dsi_pan_node = of_find_node_by_name(mdss_node, |
| panel_name); |
| if (!dsi_pan_node) { |
| pr_err("%s: invalid pan node\n", |
| __func__); |
| return NULL; |
| } |
| } |
| return dsi_pan_node; |
| } |
| |
| static int __devinit mdss_dsi_ctrl_probe(struct platform_device *pdev) |
| { |
| int rc = 0; |
| u32 index; |
| struct mdss_dsi_ctrl_pdata *ctrl_pdata = NULL; |
| struct device_node *dsi_pan_node = NULL; |
| char panel_cfg[MDSS_MAX_PANEL_LEN]; |
| struct resource *mdss_dsi_mres; |
| const char *ctrl_name; |
| bool cmd_cfg_cont_splash = true; |
| |
| if (!mdss_is_ready()) { |
| pr_err("%s: MDP not probed yet!\n", __func__); |
| return -EPROBE_DEFER; |
| } |
| |
| if (!pdev->dev.of_node) { |
| pr_err("DSI driver only supports device tree probe\n"); |
| return -ENOTSUPP; |
| } |
| |
| ctrl_pdata = platform_get_drvdata(pdev); |
| if (!ctrl_pdata) { |
| ctrl_pdata = devm_kzalloc(&pdev->dev, |
| sizeof(struct mdss_dsi_ctrl_pdata), |
| GFP_KERNEL); |
| if (!ctrl_pdata) { |
| pr_err("%s: FAILED: cannot alloc dsi ctrl\n", |
| __func__); |
| rc = -ENOMEM; |
| goto error_no_mem; |
| } |
| platform_set_drvdata(pdev, ctrl_pdata); |
| } |
| |
| ctrl_name = of_get_property(pdev->dev.of_node, "label", NULL); |
| if (!ctrl_name) |
| pr_info("%s:%d, DSI Ctrl name not specified\n", |
| __func__, __LINE__); |
| else |
| pr_info("%s: DSI Ctrl name = %s\n", |
| __func__, ctrl_name); |
| |
| rc = of_property_read_u32(pdev->dev.of_node, |
| "cell-index", &index); |
| if (rc) { |
| dev_err(&pdev->dev, |
| "%s: Cell-index not specified, rc=%d\n", |
| __func__, rc); |
| goto error_no_mem; |
| } |
| |
| if (index == 0) |
| pdev->id = 1; |
| else |
| pdev->id = 2; |
| |
| mdss_dsi_mres = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (!mdss_dsi_mres) { |
| pr_err("%s:%d unable to get the MDSS resources", |
| __func__, __LINE__); |
| rc = -ENOMEM; |
| goto error_no_mem; |
| } |
| |
| mdss_dsi_base = ioremap(mdss_dsi_mres->start, |
| resource_size(mdss_dsi_mres)); |
| if (!mdss_dsi_base) { |
| pr_err("%s:%d unable to remap dsi resources", |
| __func__, __LINE__); |
| rc = -ENOMEM; |
| goto error_no_mem; |
| } |
| |
| rc = of_platform_populate(pdev->dev.of_node, |
| NULL, NULL, &pdev->dev); |
| if (rc) { |
| dev_err(&pdev->dev, |
| "%s: failed to add child nodes, rc=%d\n", |
| __func__, rc); |
| goto error_ioremap; |
| } |
| |
| /* Parse the regulator information */ |
| rc = mdss_dsi_get_dt_vreg_data(&pdev->dev, |
| &ctrl_pdata->power_data); |
| if (rc) { |
| pr_err("%s: failed to get vreg data from dt. rc=%d\n", |
| __func__, rc); |
| goto error_vreg; |
| } |
| |
| /* DSI panels can be different between controllers */ |
| rc = mdss_dsi_get_panel_cfg(panel_cfg); |
| if (!rc) |
| /* dsi panel cfg not present */ |
| pr_warn("%s:%d:dsi specific cfg not present\n", |
| __func__, __LINE__); |
| |
| /* find panel device node */ |
| dsi_pan_node = mdss_dsi_find_panel_of_node(pdev, panel_cfg); |
| if (!dsi_pan_node) { |
| pr_err("%s: can't find panel node %s\n", __func__, panel_cfg); |
| goto error_pan_node; |
| } |
| |
| cmd_cfg_cont_splash = mdss_panel_get_boot_cfg() ? true : false; |
| |
| rc = mdss_dsi_panel_init(dsi_pan_node, ctrl_pdata, cmd_cfg_cont_splash); |
| if (rc) { |
| pr_err("%s: dsi panel init failed\n", __func__); |
| goto error_pan_node; |
| } |
| |
| rc = dsi_panel_device_register(dsi_pan_node, ctrl_pdata); |
| if (rc) { |
| pr_err("%s: dsi panel dev reg failed\n", __func__); |
| goto error_pan_node; |
| } |
| |
| pr_debug("%s: Dsi Ctrl->%d initialized\n", __func__, index); |
| return 0; |
| |
| error_pan_node: |
| of_node_put(dsi_pan_node); |
| error_vreg: |
| mdss_dsi_put_dt_vreg_data(&pdev->dev, &ctrl_pdata->power_data); |
| error_ioremap: |
| iounmap(mdss_dsi_base); |
| error_no_mem: |
| devm_kfree(&pdev->dev, ctrl_pdata); |
| |
| return rc; |
| } |
| |
| static int __devexit mdss_dsi_ctrl_remove(struct platform_device *pdev) |
| { |
| struct msm_fb_data_type *mfd; |
| struct mdss_dsi_ctrl_pdata *ctrl_pdata = platform_get_drvdata(pdev); |
| |
| if (!ctrl_pdata) { |
| pr_err("%s: no driver data\n", __func__); |
| return -ENODEV; |
| } |
| |
| if (msm_dss_config_vreg(&pdev->dev, |
| ctrl_pdata->power_data.vreg_config, |
| ctrl_pdata->power_data.num_vreg, 1) < 0) |
| pr_err("%s: failed to de-init vregs\n", __func__); |
| mdss_dsi_put_dt_vreg_data(&pdev->dev, &ctrl_pdata->power_data); |
| mfd = platform_get_drvdata(pdev); |
| iounmap(mdss_dsi_base); |
| return 0; |
| } |
| |
| struct device dsi_dev; |
| |
| int mdss_dsi_retrieve_ctrl_resources(struct platform_device *pdev, int mode, |
| struct mdss_dsi_ctrl_pdata *ctrl) |
| { |
| int rc = 0; |
| u32 index; |
| struct resource *mdss_dsi_mres; |
| |
| rc = of_property_read_u32(pdev->dev.of_node, "cell-index", &index); |
| if (rc) { |
| dev_err(&pdev->dev, |
| "%s: Cell-index not specified, rc=%d\n", |
| __func__, rc); |
| return rc; |
| } |
| |
| if (index == 0) { |
| if (mode != DISPLAY_1) { |
| pr_err("%s:%d Panel->Ctrl mapping is wrong", |
| __func__, __LINE__); |
| return -EPERM; |
| } |
| } else if (index == 1) { |
| if (mode != DISPLAY_2) { |
| pr_err("%s:%d Panel->Ctrl mapping is wrong", |
| __func__, __LINE__); |
| return -EPERM; |
| } |
| } else { |
| pr_err("%s:%d Unknown Ctrl mapped to panel", |
| __func__, __LINE__); |
| return -EPERM; |
| } |
| |
| mdss_dsi_mres = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (!mdss_dsi_mres) { |
| pr_err("%s:%d unable to get the DSI ctrl resources", |
| __func__, __LINE__); |
| return -ENOMEM; |
| } |
| |
| ctrl->ctrl_base = ioremap(mdss_dsi_mres->start, |
| resource_size(mdss_dsi_mres)); |
| if (!(ctrl->ctrl_base)) { |
| pr_err("%s:%d unable to remap dsi resources", |
| __func__, __LINE__); |
| return -ENOMEM; |
| } |
| |
| ctrl->reg_size = resource_size(mdss_dsi_mres); |
| |
| pr_info("%s: dsi base=%x size=%x\n", |
| __func__, (int)ctrl->ctrl_base, ctrl->reg_size); |
| |
| return 0; |
| } |
| |
| int dsi_panel_device_register(struct device_node *pan_node, |
| struct mdss_dsi_ctrl_pdata *ctrl_pdata) |
| { |
| struct mipi_panel_info *mipi; |
| int rc, i, len; |
| u32 tmp[9]; |
| struct device_node *dsi_ctrl_np = NULL; |
| struct platform_device *ctrl_pdev = NULL; |
| bool dynamic_fps; |
| const char *data; |
| struct mdss_panel_info *pinfo = &(ctrl_pdata->panel_data.panel_info); |
| |
| mipi = &(pinfo->mipi); |
| |
| pinfo->type = |
| ((mipi->mode == DSI_VIDEO_MODE) |
| ? MIPI_VIDEO_PANEL : MIPI_CMD_PANEL); |
| |
| rc = mdss_dsi_clk_div_config(pinfo, mipi->frame_rate); |
| if (rc) { |
| pr_err("%s: unable to initialize the clk dividers\n", __func__); |
| return rc; |
| } |
| |
| dsi_ctrl_np = of_parse_phandle(pan_node, |
| "qcom,mdss-dsi-panel-controller", 0); |
| if (!dsi_ctrl_np) { |
| pr_err("%s: Dsi controller node not initialized\n", __func__); |
| return -EPROBE_DEFER; |
| } |
| |
| ctrl_pdev = of_find_device_by_node(dsi_ctrl_np); |
| |
| rc = mdss_dsi_regulator_init(ctrl_pdev); |
| if (rc) { |
| pr_err("%s: failed to init regulator, rc=%d\n", |
| __func__, rc); |
| return rc; |
| } |
| |
| data = of_get_property(ctrl_pdev->dev.of_node, |
| "qcom,platform-strength-ctrl", &len); |
| if ((!data) || (len != 2)) { |
| pr_err("%s:%d, Unable to read Phy Strength ctrl settings", |
| __func__, __LINE__); |
| return -EINVAL; |
| } |
| pinfo->mipi.dsi_phy_db.strength[0] = data[0]; |
| pinfo->mipi.dsi_phy_db.strength[1] = data[1]; |
| |
| data = of_get_property(ctrl_pdev->dev.of_node, |
| "qcom,platform-regulator-settings", &len); |
| if ((!data) || (len != 7)) { |
| pr_err("%s:%d, Unable to read Phy regulator settings", |
| __func__, __LINE__); |
| return -EINVAL; |
| } |
| for (i = 0; i < len; i++) { |
| pinfo->mipi.dsi_phy_db.regulator[i] |
| = data[i]; |
| } |
| |
| data = of_get_property(ctrl_pdev->dev.of_node, |
| "qcom,platform-bist-ctrl", &len); |
| if ((!data) || (len != 6)) { |
| pr_err("%s:%d, Unable to read Phy Bist Ctrl settings", |
| __func__, __LINE__); |
| return -EINVAL; |
| } |
| for (i = 0; i < len; i++) { |
| pinfo->mipi.dsi_phy_db.bistctrl[i] |
| = data[i]; |
| } |
| |
| data = of_get_property(ctrl_pdev->dev.of_node, |
| "qcom,platform-lane-config", &len); |
| if ((!data) || (len != 45)) { |
| pr_err("%s:%d, Unable to read Phy lane configure settings", |
| __func__, __LINE__); |
| return -EINVAL; |
| } |
| for (i = 0; i < len; i++) { |
| pinfo->mipi.dsi_phy_db.lanecfg[i] = |
| data[i]; |
| } |
| |
| ctrl_pdata->shared_pdata.broadcast_enable = of_property_read_bool( |
| pan_node, "qcom,mdss-dsi-panel-broadcast-mode"); |
| |
| dynamic_fps = of_property_read_bool(pan_node, |
| "qcom,mdss-dsi-pan-enable-dynamic-fps"); |
| if (dynamic_fps) { |
| pinfo->dynamic_fps = true; |
| data = of_get_property(pan_node, |
| "qcom,mdss-dsi-pan-fps-update", NULL); |
| if (data) { |
| if (!strcmp(data, "dfps_suspend_resume_mode")) { |
| pinfo->dfps_update = |
| DFPS_SUSPEND_RESUME_MODE; |
| pr_debug("%s: dfps mode: suspend/resume\n", |
| __func__); |
| } else if (!strcmp(data, |
| "dfps_immediate_clk_mode")) { |
| pinfo->dfps_update = |
| DFPS_IMMEDIATE_CLK_UPDATE_MODE; |
| pr_debug("%s: dfps mode: Immediate clk\n", |
| __func__); |
| } else { |
| pr_debug("%s: dfps to default mode\n", |
| __func__); |
| pinfo->dfps_update = |
| DFPS_SUSPEND_RESUME_MODE; |
| pr_debug("%s: dfps mode: suspend/resume\n", |
| __func__); |
| } |
| } else { |
| pr_debug("%s: dfps update mode not configured\n", |
| __func__); |
| pinfo->dynamic_fps = |
| false; |
| pr_debug("%s: dynamic FPS disabled\n", |
| __func__); |
| } |
| pinfo->new_fps = pinfo->mipi.frame_rate; |
| } |
| |
| ctrl_pdata->disp_en_gpio = of_get_named_gpio(ctrl_pdev->dev.of_node, |
| "qcom,platform-enable-gpio", 0); |
| |
| if (!gpio_is_valid(ctrl_pdata->disp_en_gpio)) { |
| pr_err("%s:%d, Disp_en gpio not specified\n", |
| __func__, __LINE__); |
| } else { |
| rc = gpio_request(ctrl_pdata->disp_en_gpio, "disp_enable"); |
| if (rc) { |
| pr_err("request reset gpio failed, rc=%d\n", |
| rc); |
| gpio_free(ctrl_pdata->disp_en_gpio); |
| return -ENODEV; |
| } |
| } |
| |
| if (pinfo->type == MIPI_CMD_PANEL) { |
| ctrl_pdata->disp_te_gpio = of_get_named_gpio(ctrl_pdev->dev.of_node, |
| "qcom,platform-te-gpio", 0); |
| if (!gpio_is_valid(ctrl_pdata->disp_te_gpio)) { |
| pr_err("%s:%d, Disp_te gpio not specified\n", |
| __func__, __LINE__); |
| } |
| } |
| |
| if (gpio_is_valid(ctrl_pdata->disp_te_gpio)) { |
| rc = gpio_request(ctrl_pdata->disp_te_gpio, "disp_te"); |
| if (rc) { |
| pr_err("request TE gpio failed, rc=%d\n", |
| rc); |
| gpio_free(ctrl_pdata->disp_te_gpio); |
| return -ENODEV; |
| } |
| rc = gpio_tlmm_config(GPIO_CFG( |
| ctrl_pdata->disp_te_gpio, 1, |
| GPIO_CFG_INPUT, |
| GPIO_CFG_PULL_DOWN, |
| GPIO_CFG_2MA), |
| GPIO_CFG_ENABLE); |
| |
| if (rc) { |
| pr_err("%s: unable to config tlmm = %d\n", |
| __func__, ctrl_pdata->disp_te_gpio); |
| gpio_free(ctrl_pdata->disp_te_gpio); |
| return -ENODEV; |
| } |
| |
| rc = gpio_direction_input(ctrl_pdata->disp_te_gpio); |
| if (rc) { |
| pr_err("set_direction for disp_en gpio failed, rc=%d\n", |
| rc); |
| gpio_free(ctrl_pdata->disp_te_gpio); |
| return -ENODEV; |
| } |
| pr_debug("%s: te_gpio=%d\n", __func__, |
| ctrl_pdata->disp_te_gpio); |
| } |
| |
| rc = of_property_read_u32_array(ctrl_pdev->dev.of_node, |
| "qcom,platform-reset-sequence", tmp, MDSS_DSI_RST_SEQ_LEN); |
| if (rc) |
| pr_err("%s:%d, unable to read gpio reset sequence\n", |
| __func__, __LINE__); |
| else |
| for (i = 0; i < MDSS_DSI_RST_SEQ_LEN; ++i) |
| ctrl_pdata->rst_seq[i] = tmp[i]; |
| |
| ctrl_pdata->rst_gpio = of_get_named_gpio(ctrl_pdev->dev.of_node, |
| "qcom,platform-reset-gpio", 0); |
| if (!gpio_is_valid(ctrl_pdata->rst_gpio)) { |
| pr_err("%s:%d, reset gpio not specified\n", |
| __func__, __LINE__); |
| } else { |
| rc = gpio_request(ctrl_pdata->rst_gpio, "disp_rst_n"); |
| if (rc) { |
| pr_err("request reset gpio failed, rc=%d\n", |
| rc); |
| gpio_free(ctrl_pdata->rst_gpio); |
| if (gpio_is_valid(ctrl_pdata->disp_en_gpio)) |
| gpio_free(ctrl_pdata->disp_en_gpio); |
| return -ENODEV; |
| } |
| } |
| |
| if (pinfo->mode_gpio_state != MODE_GPIO_NOT_VALID) { |
| |
| ctrl_pdata->mode_gpio = of_get_named_gpio( |
| ctrl_pdev->dev.of_node, |
| "qcom,platform-mode-gpio", 0); |
| if (!gpio_is_valid(ctrl_pdata->mode_gpio)) { |
| pr_info("%s:%d, mode gpio not specified\n", |
| __func__, __LINE__); |
| } else { |
| rc = gpio_request(ctrl_pdata->mode_gpio, "panel_mode"); |
| if (rc) { |
| pr_err("request panel mode gpio failed,rc=%d\n", |
| rc); |
| gpio_free(ctrl_pdata->mode_gpio); |
| if (gpio_is_valid(ctrl_pdata->disp_en_gpio)) |
| gpio_free(ctrl_pdata->disp_en_gpio); |
| if (gpio_is_valid(ctrl_pdata->rst_gpio)) |
| gpio_free(ctrl_pdata->rst_gpio); |
| if (gpio_is_valid(ctrl_pdata->disp_te_gpio)) |
| gpio_free(ctrl_pdata->disp_te_gpio); |
| return -ENODEV; |
| } |
| } |
| } |
| |
| if (mdss_dsi_clk_init(ctrl_pdev, ctrl_pdata)) { |
| pr_err("%s: unable to initialize Dsi ctrl clks\n", __func__); |
| return -EPERM; |
| } |
| |
| if (mdss_dsi_retrieve_ctrl_resources(ctrl_pdev, |
| pinfo->pdest, |
| ctrl_pdata)) { |
| pr_err("%s: unable to get Dsi controller res\n", __func__); |
| return -EPERM; |
| } |
| |
| ctrl_pdata->panel_data.event_handler = mdss_dsi_event_handler; |
| |
| if (ctrl_pdata->bklt_ctrl == BL_PWM) |
| mdss_dsi_panel_pwm_cfg(ctrl_pdata); |
| |
| mdss_dsi_ctrl_init(ctrl_pdata); |
| /* |
| * register in mdp driver |
| */ |
| |
| ctrl_pdata->pclk_rate = mipi->dsi_pclk_rate; |
| ctrl_pdata->byte_clk_rate = pinfo->clk_rate / 8; |
| pr_debug("%s: pclk=%d, bclk=%d\n", __func__, |
| ctrl_pdata->pclk_rate, ctrl_pdata->byte_clk_rate); |
| |
| ctrl_pdata->ctrl_state = CTRL_STATE_UNKNOWN; |
| |
| if (pinfo->cont_splash_enabled) { |
| pinfo->panel_power_on = 1; |
| rc = mdss_dsi_panel_power_on(&(ctrl_pdata->panel_data), 1); |
| if (rc) { |
| pr_err("%s: Panel power on failed\n", __func__); |
| return rc; |
| } |
| |
| mdss_dsi_clk_ctrl(ctrl_pdata, 1); |
| ctrl_pdata->ctrl_state |= |
| (CTRL_STATE_PANEL_INIT | CTRL_STATE_MDP_ACTIVE); |
| } else { |
| pinfo->panel_power_on = 0; |
| } |
| |
| rc = mdss_register_panel(ctrl_pdev, &(ctrl_pdata->panel_data)); |
| if (rc) { |
| pr_err("%s: unable to register MIPI DSI panel\n", __func__); |
| if (ctrl_pdata->rst_gpio) |
| gpio_free(ctrl_pdata->rst_gpio); |
| if (gpio_is_valid(ctrl_pdata->disp_en_gpio)) |
| gpio_free(ctrl_pdata->disp_en_gpio); |
| return rc; |
| } |
| |
| if (pinfo->pdest == DISPLAY_1) { |
| mdss_debug_register_base("dsi0", |
| ctrl_pdata->ctrl_base, ctrl_pdata->reg_size); |
| ctrl_pdata->ndx = 0; |
| } else { |
| mdss_debug_register_base("dsi1", |
| ctrl_pdata->ctrl_base, ctrl_pdata->reg_size); |
| ctrl_pdata->ndx = 1; |
| } |
| |
| pr_debug("%s: Panel data initialized\n", __func__); |
| return 0; |
| } |
| |
| static const struct of_device_id mdss_dsi_ctrl_dt_match[] = { |
| {.compatible = "qcom,mdss-dsi-ctrl"}, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(of, mdss_dsi_ctrl_dt_match); |
| |
| static struct platform_driver mdss_dsi_ctrl_driver = { |
| .probe = mdss_dsi_ctrl_probe, |
| .remove = __devexit_p(mdss_dsi_ctrl_remove), |
| .shutdown = NULL, |
| .driver = { |
| .name = "mdss_dsi_ctrl", |
| .of_match_table = mdss_dsi_ctrl_dt_match, |
| }, |
| }; |
| |
| static int mdss_dsi_register_driver(void) |
| { |
| return platform_driver_register(&mdss_dsi_ctrl_driver); |
| } |
| |
| static int __init mdss_dsi_driver_init(void) |
| { |
| int ret; |
| |
| ret = mdss_dsi_register_driver(); |
| if (ret) { |
| pr_err("mdss_dsi_register_driver() failed!\n"); |
| return ret; |
| } |
| |
| return ret; |
| } |
| module_init(mdss_dsi_driver_init); |
| |
| static void __exit mdss_dsi_driver_cleanup(void) |
| { |
| iounmap(mdss_dsi_base); |
| platform_driver_unregister(&mdss_dsi_ctrl_driver); |
| } |
| module_exit(mdss_dsi_driver_cleanup); |
| |
| MODULE_LICENSE("GPL v2"); |
| MODULE_DESCRIPTION("DSI controller driver"); |
| MODULE_AUTHOR("Chandan Uddaraju <chandanu@codeaurora.org>"); |