| /* |
| * linux/arch/arm/mach-nomadik/board-8815nhk.c |
| * |
| * Copyright (C) STMicroelectronics |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2, as |
| * published by the Free Software Foundation. |
| * |
| * NHK15 board specifc driver definition |
| */ |
| #include <linux/types.h> |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/platform_device.h> |
| #include <linux/amba/bus.h> |
| #include <linux/interrupt.h> |
| #include <linux/gpio.h> |
| #include <asm/mach-types.h> |
| #include <asm/mach/arch.h> |
| #include <asm/mach/irq.h> |
| #include <mach/setup.h> |
| #include "clock.h" |
| |
| #define __MEM_4K_RESOURCE(x) \ |
| .res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM} |
| |
| static struct amba_device uart0_device = { |
| .dev = { .init_name = "uart0" }, |
| __MEM_4K_RESOURCE(NOMADIK_UART0_BASE), |
| .irq = {IRQ_UART0, NO_IRQ}, |
| }; |
| |
| static struct amba_device uart1_device = { |
| .dev = { .init_name = "uart1" }, |
| __MEM_4K_RESOURCE(NOMADIK_UART1_BASE), |
| .irq = {IRQ_UART1, NO_IRQ}, |
| }; |
| |
| static struct amba_device *amba_devs[] __initdata = { |
| &uart0_device, |
| &uart1_device, |
| }; |
| |
| /* We have a fixed clock alone, by now */ |
| static struct clk nhk8815_clk_48 = { |
| .rate = 48*1000*1000, |
| }; |
| |
| static struct resource nhk8815_eth_resources[] = { |
| { |
| .name = "smc91x-regs", |
| .start = 0x34000000 + 0x300, |
| .end = 0x34000000 + SZ_64K - 1, |
| .flags = IORESOURCE_MEM, |
| }, { |
| .start = NOMADIK_GPIO_TO_IRQ(115), |
| .end = NOMADIK_GPIO_TO_IRQ(115), |
| .flags = IORESOURCE_IRQ | IRQF_TRIGGER_RISING, |
| } |
| }; |
| |
| static struct platform_device nhk8815_eth_device = { |
| .name = "smc91x", |
| .resource = nhk8815_eth_resources, |
| .num_resources = ARRAY_SIZE(nhk8815_eth_resources), |
| }; |
| |
| static int __init nhk8815_eth_init(void) |
| { |
| int gpio_nr = 115; /* hardwired in the board */ |
| int err; |
| |
| err = gpio_request(gpio_nr, "eth_irq"); |
| if (!err) err = nmk_gpio_set_mode(gpio_nr, NMK_GPIO_ALT_GPIO); |
| if (!err) err = gpio_direction_input(gpio_nr); |
| if (err) |
| pr_err("Error %i in %s\n", err, __func__); |
| return err; |
| } |
| device_initcall(nhk8815_eth_init); |
| |
| static struct platform_device *nhk8815_platform_devices[] __initdata = { |
| &nhk8815_eth_device, |
| /* will add more devices */ |
| }; |
| |
| static void __init nhk8815_platform_init(void) |
| { |
| int i; |
| |
| cpu8815_platform_init(); |
| platform_add_devices(nhk8815_platform_devices, |
| ARRAY_SIZE(nhk8815_platform_devices)); |
| |
| for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { |
| nmdk_clk_create(&nhk8815_clk_48, amba_devs[i]->dev.init_name); |
| amba_device_register(amba_devs[i], &iomem_resource); |
| } |
| } |
| |
| MACHINE_START(NOMADIK, "NHK8815") |
| /* Maintainer: ST MicroElectronics */ |
| .phys_io = NOMADIK_UART0_BASE, |
| .io_pg_offst = (IO_ADDRESS(NOMADIK_UART0_BASE) >> 18) & 0xfffc, |
| .boot_params = 0x100, |
| .map_io = cpu8815_map_io, |
| .init_irq = cpu8815_init_irq, |
| .timer = &nomadik_timer, |
| .init_machine = nhk8815_platform_init, |
| MACHINE_END |