| /* Copyright (c) 2010-2012, Code Aurora Forum. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/mutex.h> |
| #include <linux/platform_device.h> |
| #include <linux/err.h> |
| #include <linux/hwmon.h> |
| #include <linux/hwmon-sysfs.h> |
| #include <linux/miscdevice.h> |
| #include <linux/fs.h> |
| #include <linux/sched.h> |
| #include <linux/wait.h> |
| #include <linux/uaccess.h> |
| #include <linux/msm_adc.h> |
| #include <linux/pmic8058-xoadc.h> |
| #include <linux/slab.h> |
| #include <linux/semaphore.h> |
| |
| #include <mach/dal.h> |
| |
| #define MSM_ADC_DRIVER_NAME "msm_adc" |
| #define MSM_ADC_MAX_FNAME 15 |
| |
| #define MSM_ADC_DALRPC_DEVICEID 0x02000067 |
| #define MSM_ADC_DALRPC_PORT_NAME "DAL00" |
| #define MSM_ADC_DALRPC_CPU SMD_APPS_MODEM |
| |
| #define MSM_ADC_DALRPC_CMD_REQ_CONV 9 |
| #define MSM_ADC_DALRPC_CMD_INPUT_PROP 11 |
| |
| #define MSM_ADC_DALRC_CONV_TIMEOUT (5 * HZ) /* 5 seconds */ |
| |
| #define MSM_8x25_ADC_DEV_ID 0 |
| #define MSM_8x25_CHAN_ID 16 |
| |
| enum dal_error { |
| DAL_ERROR_INVALID_DEVICE_IDX = 1, |
| DAL_ERROR_INVALID_CHANNEL_IDX, |
| DAL_ERROR_NULL_POINTER, |
| DAL_ERROR_DEVICE_QUEUE_FULL, |
| DAL_ERROR_INVALID_PROPERTY_LENGTH, |
| DAL_ERROR_REMOTE_EVENT_POOL_FULL |
| }; |
| |
| enum dal_result_status { |
| DAL_RESULT_STATUS_INVALID, |
| DAL_RESULT_STATUS_VALID |
| }; |
| |
| struct dal_conv_state { |
| struct dal_conv_slot context[MSM_ADC_DEV_MAX_INFLIGHT]; |
| struct list_head slots; |
| struct mutex list_lock; |
| struct semaphore slot_count; |
| }; |
| |
| struct adc_dev { |
| char *name; |
| uint32_t nchans; |
| struct dal_conv_state conv; |
| struct dal_translation transl; |
| struct sensor_device_attribute *sens_attr; |
| char **fnames; |
| }; |
| |
| struct msm_adc_drv { |
| /* Common to both XOADC and EPM */ |
| struct platform_device *pdev; |
| struct device *hwmon; |
| struct miscdevice misc; |
| /* XOADC variables */ |
| struct sensor_device_attribute *sens_attr; |
| struct workqueue_struct *wq; |
| atomic_t online; |
| atomic_t total_outst; |
| wait_queue_head_t total_outst_wait; |
| |
| /* EPM variables */ |
| void *dev_h; |
| struct adc_dev *devs[MSM_ADC_MAX_NUM_DEVS]; |
| struct mutex prop_lock; |
| atomic_t rpc_online; |
| atomic_t rpc_total_outst; |
| wait_queue_head_t rpc_total_outst_wait; |
| }; |
| |
| static bool epm_init; |
| static bool epm_fluid_enabled; |
| |
| /* Needed to support file_op interfaces */ |
| static struct msm_adc_drv *msm_adc_drv; |
| |
| static bool conv_first_request; |
| |
| static ssize_t msm_adc_show_curr(struct device *dev, |
| struct device_attribute *devattr, char *buf); |
| |
| static int msm_rpc_adc_blocking_conversion(struct msm_adc_drv *msm_adc, |
| uint32_t chan, struct adc_chan_result *result); |
| |
| static int msm_adc_blocking_conversion(struct msm_adc_drv *msm_adc, |
| uint32_t chan, struct adc_chan_result *result); |
| |
| static int msm_adc_open(struct inode *inode, struct file *file) |
| { |
| struct msm_client_data *client; |
| struct msm_adc_drv *msm_adc = msm_adc_drv; |
| struct platform_device *pdev = msm_adc->pdev; |
| |
| client = kzalloc(sizeof(struct msm_client_data), GFP_KERNEL); |
| if (!client) { |
| dev_err(&pdev->dev, "Unable to allocate memory\n"); |
| return -ENOMEM; |
| } |
| |
| if (!try_module_get(THIS_MODULE)) { |
| kfree(client); |
| return -EACCES; |
| } |
| |
| mutex_init(&client->lock); |
| INIT_LIST_HEAD(&client->complete_list); |
| init_waitqueue_head(&client->data_wait); |
| init_waitqueue_head(&client->outst_wait); |
| |
| client->online = 1; |
| |
| file->private_data = client; |
| |
| return nonseekable_open(inode, file); |
| } |
| |
| static inline void msm_adc_restore_slot(struct dal_conv_state *conv_s, |
| struct dal_conv_slot *slot) |
| { |
| mutex_lock(&conv_s->list_lock); |
| list_add(&slot->list, &conv_s->slots); |
| mutex_unlock(&conv_s->list_lock); |
| |
| up(&conv_s->slot_count); |
| } |
| |
| static int no_pending_client_requests(struct msm_client_data *client) |
| { |
| mutex_lock(&client->lock); |
| |
| if (client->num_outstanding == 0) { |
| mutex_unlock(&client->lock); |
| return 1; |
| } |
| |
| mutex_unlock(&client->lock); |
| |
| return 0; |
| } |
| |
| static int data_avail(struct msm_client_data *client, uint32_t *pending) |
| { |
| uint32_t completed; |
| |
| mutex_lock(&client->lock); |
| completed = client->num_complete; |
| mutex_unlock(&client->lock); |
| |
| if (completed > 0) { |
| if (pending != NULL) |
| *pending = completed; |
| return 1; |
| } |
| |
| return 0; |
| } |
| |
| static int msm_adc_release(struct inode *inode, struct file *file) |
| { |
| struct msm_client_data *client = file->private_data; |
| struct adc_conv_slot *slot, *tmp; |
| int rc; |
| struct msm_adc_platform_data *pdata = |
| msm_adc_drv->pdev->dev.platform_data; |
| struct msm_adc_channels *channel = pdata->channel; |
| |
| module_put(THIS_MODULE); |
| |
| mutex_lock(&client->lock); |
| |
| /* prevent any further requests while we teardown the client */ |
| client->online = 0; |
| |
| mutex_unlock(&client->lock); |
| |
| /* |
| * We may still have outstanding transactions in flight from this |
| * client that have not completed. Make sure they're completed |
| * before removing the client. |
| */ |
| rc = wait_event_interruptible(client->outst_wait, |
| no_pending_client_requests(client)); |
| if (rc) { |
| pr_err("%s: wait_event_interruptible failed rc = %d\n", |
| __func__, rc); |
| return rc; |
| } |
| |
| /* |
| * All transactions have completed. Add slot resources back to the |
| * appropriate devices. |
| */ |
| list_for_each_entry_safe(slot, tmp, &client->complete_list, list) { |
| slot->client = NULL; |
| list_del(&slot->list); |
| channel[slot->conv.result.chan].adc_access_fn->adc_restore_slot( |
| channel[slot->conv.result.chan].adc_dev_instance, slot); |
| } |
| |
| kfree(client); |
| |
| return 0; |
| } |
| |
| static int msm_adc_translate_dal_to_hwmon(struct msm_adc_drv *msm_adc, |
| uint32_t chan, |
| struct adc_dev_spec *dest) |
| { |
| struct dal_translation *transl; |
| struct msm_adc_platform_data *pdata = msm_adc->pdev->dev.platform_data; |
| int i; |
| |
| for (i = 0; i < pdata->num_adc; i++) { |
| transl = &msm_adc->devs[i]->transl; |
| if (chan >= transl->hwmon_start && |
| chan <= transl->hwmon_end) { |
| dest->dal.dev_idx = transl->dal_dev_idx; |
| dest->hwmon_dev_idx = transl->hwmon_dev_idx; |
| dest->dal.chan_idx = chan - transl->hwmon_start; |
| return 0; |
| } |
| } |
| return -EINVAL; |
| } |
| |
| static int msm_adc_translate_hwmon_to_dal(struct msm_adc_drv *msm_adc, |
| struct adc_dev_spec *source, |
| uint32_t *chan) |
| { |
| struct msm_adc_platform_data *pdata = msm_adc->pdev->dev.platform_data; |
| struct dal_translation *transl; |
| int i; |
| |
| for (i = 0; i < pdata->num_adc; i++) { |
| transl = &msm_adc->devs[i]->transl; |
| if (source->dal.dev_idx != transl->dal_dev_idx) |
| continue; |
| *chan = transl->hwmon_start + source->dal.chan_idx; |
| return 0; |
| } |
| return -EINVAL; |
| } |
| |
| static int msm_adc_getinputproperties(struct msm_adc_drv *msm_adc, |
| const char *lookup_name, |
| struct adc_dev_spec *result) |
| { |
| struct device *dev = &msm_adc->pdev->dev; |
| int rc; |
| |
| mutex_lock(&msm_adc->prop_lock); |
| |
| rc = dalrpc_fcn_8(MSM_ADC_DALRPC_CMD_INPUT_PROP, msm_adc->dev_h, |
| lookup_name, strlen(lookup_name) + 1, |
| &result->dal, sizeof(struct dal_dev_spec)); |
| if (rc) { |
| dev_err(dev, "DAL getprop request failed: rc = %d\n", rc); |
| mutex_unlock(&msm_adc->prop_lock); |
| return -EIO; |
| } |
| |
| mutex_unlock(&msm_adc->prop_lock); |
| return rc; |
| } |
| |
| static int msm_adc_lookup(struct msm_adc_drv *msm_adc, |
| struct msm_adc_lookup *lookup) |
| { |
| struct msm_adc_platform_data *pdata = msm_adc->pdev->dev.platform_data; |
| struct adc_dev_spec target; |
| int rc = 0, i = 0; |
| uint32_t len = 0; |
| |
| len = strnlen(lookup->name, MSM_ADC_MAX_CHAN_STR); |
| while (i < pdata->num_chan_supported) { |
| if (strncmp(lookup->name, pdata->channel[i].name, len)) |
| i++; |
| else |
| break; |
| } |
| |
| if (pdata->num_chan_supported > 0 && i < pdata->num_chan_supported) { |
| lookup->chan_idx = i; |
| } else if (msm_adc->dev_h) { |
| rc = msm_adc_getinputproperties(msm_adc, lookup->name, &target); |
| if (rc) { |
| pr_err("%s: Lookup failed for %s\n", __func__, |
| lookup->name); |
| return rc; |
| } |
| rc = msm_adc_translate_hwmon_to_dal(msm_adc, &target, |
| &lookup->chan_idx); |
| if (rc) |
| pr_err("%s: Translation failed for %s\n", __func__, |
| lookup->name); |
| } else { |
| pr_err("%s: Lookup failed for %s\n", __func__, lookup->name); |
| rc = -EINVAL; |
| } |
| return rc; |
| } |
| |
| static int msm_adc_aio_conversion(struct msm_adc_drv *msm_adc, |
| struct adc_chan_result *request, |
| struct msm_client_data *client) |
| { |
| struct msm_adc_platform_data *pdata = |
| msm_adc_drv->pdev->dev.platform_data; |
| struct msm_adc_channels *channel = &pdata->channel[request->chan]; |
| struct adc_conv_slot *slot; |
| |
| /* we could block here, but only for a bounded time */ |
| channel->adc_access_fn->adc_slot_request(channel->adc_dev_instance, |
| &slot); |
| |
| if (slot) { |
| atomic_inc(&msm_adc->total_outst); |
| mutex_lock(&client->lock); |
| client->num_outstanding++; |
| mutex_unlock(&client->lock); |
| |
| /* indicates non blocking request to callback handler */ |
| slot->blocking = 0; |
| slot->compk = NULL;/*For kernel space usage; n/a for usr space*/ |
| slot->conv.result.chan = client->adc_chan = request->chan; |
| slot->client = client; |
| slot->adc_request = START_OF_CONV; |
| slot->chan_path = channel->chan_path_type; |
| slot->chan_adc_config = channel->adc_config_type; |
| slot->chan_adc_calib = channel->adc_calib_type; |
| queue_work(msm_adc->wq, &slot->work); |
| return 0; |
| } |
| return -EBUSY; |
| } |
| |
| static int msm_adc_fluid_hw_deinit(struct msm_adc_drv *msm_adc) |
| { |
| struct msm_adc_platform_data *pdata = msm_adc->pdev->dev.platform_data; |
| |
| if (!epm_init) |
| return -EINVAL; |
| |
| if (pdata->gpio_config == APROC_CONFIG && |
| epm_fluid_enabled && pdata->adc_fluid_disable != NULL) { |
| pdata->adc_fluid_disable(); |
| epm_fluid_enabled = false; |
| } |
| |
| return 0; |
| } |
| |
| static int msm_adc_fluid_hw_init(struct msm_adc_drv *msm_adc) |
| { |
| struct msm_adc_platform_data *pdata = msm_adc->pdev->dev.platform_data; |
| |
| if (!epm_init) |
| return -EINVAL; |
| |
| if (!pdata->adc_fluid_enable) |
| return -ENODEV; |
| |
| printk(KERN_DEBUG "msm_adc_fluid_hw_init: Calling adc_fluid_enable.\n"); |
| |
| if (pdata->gpio_config == APROC_CONFIG && !epm_fluid_enabled) { |
| pdata->adc_fluid_enable(); |
| epm_fluid_enabled = true; |
| } |
| |
| /* return success for now but check for errors from hw init configuration */ |
| return 0; |
| } |
| |
| static int msm_adc_poll_complete(struct msm_adc_drv *msm_adc, |
| struct msm_client_data *client, uint32_t *pending) |
| { |
| int rc; |
| |
| /* |
| * Don't proceed if there there's nothing queued on this client. |
| * We could deadlock otherwise in a single threaded scenario. |
| */ |
| if (no_pending_client_requests(client) && !data_avail(client, pending)) |
| return -EDEADLK; |
| |
| rc = wait_event_interruptible(client->data_wait, |
| data_avail(client, pending)); |
| if (rc) |
| return rc; |
| |
| return 0; |
| } |
| |
| static int msm_adc_read_result(struct msm_adc_drv *msm_adc, |
| struct msm_client_data *client, |
| struct adc_chan_result *result) |
| { |
| struct msm_adc_platform_data *pdata = msm_adc->pdev->dev.platform_data; |
| struct msm_adc_channels *channel = pdata->channel; |
| struct adc_conv_slot *slot; |
| int rc = 0; |
| |
| mutex_lock(&client->lock); |
| |
| slot = list_first_entry(&client->complete_list, |
| struct adc_conv_slot, list); |
| if (!slot) { |
| mutex_unlock(&client->lock); |
| return -ENOMSG; |
| } |
| |
| slot->client = NULL; |
| list_del(&slot->list); |
| |
| client->num_complete--; |
| |
| mutex_unlock(&client->lock); |
| |
| *result = slot->conv.result; |
| |
| /* restore this slot to reserve */ |
| channel[slot->conv.result.chan].adc_access_fn->adc_restore_slot( |
| channel[slot->conv.result.chan].adc_dev_instance, slot); |
| |
| return rc; |
| } |
| |
| static long msm_adc_ioctl(struct file *file, unsigned int cmd, |
| unsigned long arg) |
| { |
| struct msm_client_data *client = file->private_data; |
| struct msm_adc_drv *msm_adc = msm_adc_drv; |
| struct platform_device *pdev = msm_adc->pdev; |
| struct msm_adc_platform_data *pdata = pdev->dev.platform_data; |
| uint32_t block_res = 0; |
| |
| int rc; |
| |
| switch (cmd) { |
| case MSM_ADC_REQUEST: |
| { |
| struct adc_chan_result conv; |
| |
| if (copy_from_user(&conv, (void __user *)arg, |
| sizeof(struct adc_chan_result))) |
| return -EFAULT; |
| |
| if (conv.chan < pdata->num_chan_supported) { |
| rc = msm_adc_blocking_conversion(msm_adc, |
| conv.chan, &conv); |
| } else { |
| if (!msm_adc->dev_h) |
| return -EAGAIN; |
| |
| rc = msm_rpc_adc_blocking_conversion(msm_adc, |
| conv.chan, &conv); |
| } |
| if (rc) { |
| dev_dbg(&pdev->dev, "BLK conversion failed\n"); |
| return rc; |
| } |
| |
| if (copy_to_user((void __user *)arg, &conv, |
| sizeof(struct adc_chan_result))) |
| return -EFAULT; |
| break; |
| } |
| case MSM_ADC_AIO_REQUEST_BLOCK_RES: |
| block_res = 1; |
| case MSM_ADC_AIO_REQUEST: |
| { |
| struct adc_chan_result conv; |
| |
| if (copy_from_user(&conv, (void __user *)arg, |
| sizeof(struct adc_chan_result))) |
| return -EFAULT; |
| |
| if (conv.chan >= pdata->num_chan_supported) |
| return -EINVAL; |
| |
| rc = msm_adc_aio_conversion(msm_adc, &conv, client); |
| if (rc) { |
| dev_dbg(&pdev->dev, "AIO conversion failed\n"); |
| return rc; |
| } |
| if (copy_to_user((void __user *)arg, &conv, |
| sizeof(struct adc_chan_result))) |
| return -EFAULT; |
| break; |
| } |
| case MSM_ADC_AIO_POLL: |
| { |
| uint32_t completed; |
| |
| rc = msm_adc_poll_complete(msm_adc, client, &completed); |
| if (rc) { |
| dev_dbg(&pdev->dev, "poll request failed\n"); |
| return rc; |
| } |
| |
| if (copy_to_user((void __user *)arg, &completed, |
| sizeof(uint32_t))) |
| return -EFAULT; |
| |
| break; |
| } |
| case MSM_ADC_AIO_READ: |
| { |
| struct adc_chan_result result; |
| |
| rc = msm_adc_read_result(msm_adc, client, &result); |
| if (rc) { |
| dev_dbg(&pdev->dev, "read result failed\n"); |
| return rc; |
| } |
| |
| if (copy_to_user((void __user *)arg, &result, |
| sizeof(struct adc_chan_result))) |
| return -EFAULT; |
| break; |
| } |
| case MSM_ADC_LOOKUP: |
| { |
| struct msm_adc_lookup lookup; |
| |
| if (copy_from_user(&lookup, (void __user *)arg, |
| sizeof(struct msm_adc_lookup))) |
| return -EFAULT; |
| |
| rc = msm_adc_lookup(msm_adc, &lookup); |
| if (rc) { |
| dev_dbg(&pdev->dev, "No such channel: %s\n", |
| lookup.name); |
| return rc; |
| } |
| |
| if (copy_to_user((void __user *)arg, &lookup, |
| sizeof(struct msm_adc_lookup))) |
| return -EFAULT; |
| break; |
| } |
| case MSM_ADC_FLUID_INIT: |
| { |
| uint32_t result; |
| |
| result = msm_adc_fluid_hw_init(msm_adc); |
| |
| if (copy_to_user((void __user *)arg, &result, |
| sizeof(uint32_t))) { |
| printk(KERN_ERR "MSM_ADC_FLUID_INIT: " |
| "copy_to_user returned an error.\n"); |
| return -EFAULT; |
| } |
| printk(KERN_DEBUG "MSM_ADC_FLUID_INIT: Success.\n"); |
| break; |
| } |
| case MSM_ADC_FLUID_DEINIT: |
| { |
| uint32_t result; |
| |
| result = msm_adc_fluid_hw_deinit(msm_adc); |
| |
| if (copy_to_user((void __user *)arg, &result, |
| sizeof(uint32_t))) |
| return -EFAULT; |
| break; |
| } |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| const struct file_operations msm_adc_fops = { |
| .open = msm_adc_open, |
| .release = msm_adc_release, |
| .unlocked_ioctl = msm_adc_ioctl, |
| }; |
| |
| static ssize_t msm_adc_show_curr(struct device *dev, |
| struct device_attribute *devattr, char *buf) |
| { |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); |
| struct msm_adc_drv *msm_adc = dev_get_drvdata(dev); |
| struct msm_adc_platform_data *pdata = msm_adc->pdev->dev.platform_data; |
| struct adc_chan_result result; |
| int rc; |
| |
| #ifdef CONFIG_PMIC8058_XOADC |
| rc = pm8058_xoadc_registered(); |
| if (rc <= 0) |
| return -ENODEV; |
| #endif |
| if (attr->index < pdata->num_chan_supported) { |
| rc = msm_adc_blocking_conversion(msm_adc, |
| attr->index, &result); |
| } else { |
| if (pdata->gpio_config == APROC_CONFIG && !epm_fluid_enabled |
| && pdata->adc_fluid_enable != NULL) { |
| printk(KERN_DEBUG "This is to read ADC value for " |
| "Fluid EPM and init. Do it only once.\n"); |
| pdata->adc_fluid_enable(); |
| epm_fluid_enabled = true; |
| } |
| rc = msm_rpc_adc_blocking_conversion(msm_adc, |
| attr->index, &result); |
| } |
| if (rc) |
| return 0; |
| |
| return sprintf(buf, "Result: %lld Raw: %d\n", result.physical, |
| result.adc_code); |
| } |
| |
| static int msm_rpc_adc_blocking_conversion(struct msm_adc_drv *msm_adc, |
| uint32_t hwmon_chan, struct adc_chan_result *result) |
| { |
| struct msm_adc_platform_data *pdata = msm_adc->pdev->dev.platform_data; |
| struct dal_conv_request params; |
| struct device *dev = &msm_adc->pdev->dev; |
| struct adc_dev *adc_dev; |
| struct dal_conv_state *conv_s; |
| struct dal_conv_slot *slot; |
| struct adc_dev_spec dest; |
| int timeout, rc = 0; |
| |
| if (pdata->gpio_config == APROC_CONFIG && |
| pdata->adc_gpio_enable != NULL) |
| pdata->adc_gpio_enable(hwmon_chan-pdata->num_chan_supported); |
| |
| rc = msm_adc_translate_dal_to_hwmon(msm_adc, hwmon_chan, &dest); |
| if (rc) { |
| dev_err(dev, "%s: translation from chan %u failed\n", |
| __func__, hwmon_chan); |
| if (pdata->gpio_config == APROC_CONFIG && |
| pdata->adc_gpio_disable != NULL) |
| pdata->adc_gpio_disable(hwmon_chan |
| -pdata->num_chan_supported); |
| return -EINVAL; |
| } |
| |
| adc_dev = msm_adc->devs[dest.hwmon_dev_idx]; |
| conv_s = &adc_dev->conv; |
| |
| down(&conv_s->slot_count); |
| |
| mutex_lock(&conv_s->list_lock); |
| |
| slot = list_first_entry(&conv_s->slots, struct dal_conv_slot, list); |
| list_del(&slot->list); |
| BUG_ON(!slot); |
| |
| mutex_unlock(&conv_s->list_lock); |
| |
| /* indicates blocking request to callback handler */ |
| slot->blocking = 1; |
| |
| params.target.dev_idx = dest.dal.dev_idx; |
| params.target.chan_idx = dest.dal.chan_idx; |
| params.cb_h = slot->cb_h; |
| |
| rc = dalrpc_fcn_8(MSM_ADC_DALRPC_CMD_REQ_CONV, msm_adc->dev_h, |
| ¶ms, sizeof(params), NULL, 0); |
| if (rc) { |
| dev_err(dev, "%s: Conversion for device = %u channel = %u" |
| " failed\n", __func__, params.target.dev_idx, |
| params.target.chan_idx); |
| |
| rc = -EIO; |
| goto blk_conv_err; |
| } |
| |
| timeout = wait_for_completion_interruptible_timeout(&slot->comp, |
| MSM_ADC_DALRC_CONV_TIMEOUT); |
| if (timeout == 0) { |
| dev_err(dev, "read for device = %u channel = %u timed out\n", |
| params.target.dev_idx, params.target.chan_idx); |
| rc = -ETIMEDOUT; |
| goto blk_conv_err; |
| } else if (timeout < 0) { |
| rc = -EINTR; |
| goto blk_conv_err; |
| } |
| |
| result->physical = (int64_t)slot->result.physical; |
| |
| if (slot->result.status == DAL_RESULT_STATUS_INVALID) |
| rc = -ENODATA; |
| |
| blk_conv_err: |
| if (pdata->gpio_config == APROC_CONFIG && |
| pdata->adc_gpio_disable != NULL) |
| pdata->adc_gpio_disable(hwmon_chan-pdata->num_chan_supported); |
| msm_adc_restore_slot(conv_s, slot); |
| |
| return rc; |
| } |
| |
| static int msm_adc_blocking_conversion(struct msm_adc_drv *msm_adc, |
| uint32_t hwmon_chan, struct adc_chan_result *result) |
| { |
| struct adc_conv_slot *slot; |
| struct msm_adc_platform_data *pdata = |
| msm_adc_drv->pdev->dev.platform_data; |
| struct msm_adc_channels *channel = &pdata->channel[hwmon_chan]; |
| int ret = 0; |
| |
| if (conv_first_request) { |
| ret = pm8058_xoadc_calib_device(channel->adc_dev_instance); |
| if (ret) { |
| pr_err("pmic8058 xoadc calibration failed, retry\n"); |
| return ret; |
| } |
| conv_first_request = false; |
| } |
| |
| channel->adc_access_fn->adc_slot_request(channel->adc_dev_instance, |
| &slot); |
| if (slot) { |
| slot->conv.result.chan = hwmon_chan; |
| /* indicates blocking request to callback handler */ |
| slot->blocking = 1; |
| slot->adc_request = START_OF_CONV; |
| slot->chan_path = channel->chan_path_type; |
| slot->chan_adc_config = channel->adc_config_type; |
| slot->chan_adc_calib = channel->adc_calib_type; |
| queue_work(msm_adc_drv->wq, &slot->work); |
| |
| wait_for_completion_interruptible(&slot->comp); |
| *result = slot->conv.result; |
| channel->adc_access_fn->adc_restore_slot( |
| channel->adc_dev_instance, slot); |
| return 0; |
| } |
| return -EBUSY; |
| } |
| |
| int32_t adc_channel_open(uint32_t channel, void **h) |
| { |
| struct msm_client_data *client; |
| struct msm_adc_drv *msm_adc = msm_adc_drv; |
| struct msm_adc_platform_data *pdata; |
| struct platform_device *pdev; |
| int i = 0; |
| |
| if (!msm_adc_drv) |
| return -EFAULT; |
| |
| #ifdef CONFIG_PMIC8058_XOADC |
| if (pm8058_xoadc_registered() <= 0) |
| return -ENODEV; |
| #endif |
| pdata = msm_adc->pdev->dev.platform_data; |
| pdev = msm_adc->pdev; |
| |
| while (i < pdata->num_chan_supported) { |
| if (channel == pdata->channel[i].channel_name) |
| break; |
| else |
| i++; |
| } |
| |
| if (i == pdata->num_chan_supported) |
| return -EBADF; /* unknown channel */ |
| |
| client = kzalloc(sizeof(struct msm_client_data), GFP_KERNEL); |
| if (!client) { |
| dev_err(&pdev->dev, "Unable to allocate memory\n"); |
| return -ENOMEM; |
| } |
| |
| if (!try_module_get(THIS_MODULE)) { |
| kfree(client); |
| return -EACCES; |
| } |
| |
| mutex_init(&client->lock); |
| INIT_LIST_HEAD(&client->complete_list); |
| init_waitqueue_head(&client->data_wait); |
| init_waitqueue_head(&client->outst_wait); |
| |
| client->online = 1; |
| client->adc_chan = i; |
| *h = (void *)client; |
| return 0; |
| } |
| |
| int32_t adc_channel_close(void *h) |
| { |
| struct msm_client_data *client = (struct msm_client_data *)h; |
| |
| kfree(client); |
| return 0; |
| } |
| |
| int32_t adc_channel_request_conv(void *h, struct completion *conv_complete_evt) |
| { |
| struct msm_client_data *client = (struct msm_client_data *)h; |
| struct msm_adc_platform_data *pdata = |
| msm_adc_drv->pdev->dev.platform_data; |
| struct msm_adc_channels *channel = &pdata->channel[client->adc_chan]; |
| struct adc_conv_slot *slot; |
| int ret; |
| |
| if (conv_first_request) { |
| ret = pm8058_xoadc_calib_device(channel->adc_dev_instance); |
| if (ret) { |
| pr_err("pmic8058 xoadc calibration failed, retry\n"); |
| return ret; |
| } |
| conv_first_request = false; |
| } |
| |
| channel->adc_access_fn->adc_slot_request(channel->adc_dev_instance, |
| &slot); |
| |
| if (slot) { |
| atomic_inc(&msm_adc_drv->total_outst); |
| mutex_lock(&client->lock); |
| client->num_outstanding++; |
| mutex_unlock(&client->lock); |
| |
| slot->conv.result.chan = client->adc_chan; |
| slot->blocking = 0; |
| slot->compk = conv_complete_evt; |
| slot->client = client; |
| slot->adc_request = START_OF_CONV; |
| slot->chan_path = channel->chan_path_type; |
| slot->chan_adc_config = channel->adc_config_type; |
| slot->chan_adc_calib = channel->adc_calib_type; |
| queue_work(msm_adc_drv->wq, &slot->work); |
| return 0; |
| } |
| return -EBUSY; |
| } |
| |
| int32_t adc_channel_read_result(void *h, struct adc_chan_result *chan_result) |
| { |
| struct msm_client_data *client = (struct msm_client_data *)h; |
| struct msm_adc_platform_data *pdata = |
| msm_adc_drv->pdev->dev.platform_data; |
| struct msm_adc_channels *channel = pdata->channel; |
| struct adc_conv_slot *slot; |
| int rc = 0; |
| |
| mutex_lock(&client->lock); |
| |
| slot = list_first_entry(&client->complete_list, |
| struct adc_conv_slot, list); |
| if (!slot) { |
| mutex_unlock(&client->lock); |
| return -ENOMSG; |
| } |
| |
| slot->client = NULL; |
| list_del(&slot->list); |
| |
| client->num_complete--; |
| |
| mutex_unlock(&client->lock); |
| |
| *chan_result = slot->conv.result; |
| |
| /* restore this slot to reserve */ |
| channel[slot->conv.result.chan].adc_access_fn->adc_restore_slot( |
| channel[slot->conv.result.chan].adc_dev_instance, slot); |
| |
| return rc; |
| } |
| |
| static void msm_rpc_adc_conv_cb(void *context, u32 param, |
| void *evt_buf, u32 len) |
| { |
| struct dal_adc_result *result = evt_buf; |
| struct dal_conv_slot *slot = context; |
| struct msm_adc_drv *msm_adc = msm_adc_drv; |
| |
| memcpy(&slot->result, result, sizeof(slot->result)); |
| |
| /* for blocking requests, signal complete */ |
| if (slot->blocking) |
| complete(&slot->comp); |
| |
| /* for non-blocking requests, add slot to the client completed list */ |
| else { |
| struct msm_client_data *client = slot->client; |
| |
| mutex_lock(&client->lock); |
| |
| list_add(&slot->list, &client->complete_list); |
| client->num_complete++; |
| client->num_outstanding--; |
| |
| /* |
| * if the client release has been invoked and this is call |
| * corresponds to the last request, then signal release |
| * to complete. |
| */ |
| if (slot->client->online == 0 && client->num_outstanding == 0) |
| wake_up_interruptible_all(&client->outst_wait); |
| |
| mutex_unlock(&client->lock); |
| |
| wake_up_interruptible_all(&client->data_wait); |
| |
| atomic_dec(&msm_adc->total_outst); |
| |
| /* verify driver remove has not been invoked */ |
| if (atomic_read(&msm_adc->online) == 0 && |
| atomic_read(&msm_adc->total_outst) == 0) |
| wake_up_interruptible_all(&msm_adc->total_outst_wait); |
| } |
| } |
| |
| void msm_adc_conv_cb(void *context, u32 param, |
| void *evt_buf, u32 len) |
| { |
| struct adc_conv_slot *slot = context; |
| struct msm_adc_drv *msm_adc = msm_adc_drv; |
| |
| switch (slot->adc_request) { |
| case START_OF_CONV: |
| slot->adc_request = END_OF_CONV; |
| break; |
| case START_OF_CALIBRATION: |
| slot->adc_request = END_OF_CALIBRATION; |
| break; |
| case END_OF_CALIBRATION: |
| case END_OF_CONV: |
| break; |
| } |
| queue_work(msm_adc->wq, &slot->work); |
| } |
| |
| static void msm_adc_teardown_device_conv(struct platform_device *pdev, |
| struct adc_dev *adc_dev) |
| { |
| struct dal_conv_state *conv_s = &adc_dev->conv; |
| struct msm_adc_drv *msm_adc = platform_get_drvdata(pdev); |
| struct dal_conv_slot *slot; |
| int i; |
| |
| for (i = 0; i < MSM_ADC_DEV_MAX_INFLIGHT; i++) { |
| slot = &conv_s->context[i]; |
| if (slot->cb_h) { |
| dalrpc_dealloc_cb(msm_adc->dev_h, slot->cb_h); |
| slot->cb_h = NULL; |
| } |
| } |
| } |
| |
| static void msm_rpc_adc_teardown_device(struct platform_device *pdev, |
| struct adc_dev *adc_dev) |
| { |
| struct dal_translation *transl = &adc_dev->transl; |
| int i, num_chans = transl->hwmon_end - transl->hwmon_start + 1; |
| |
| if (adc_dev->sens_attr) |
| for (i = 0; i < num_chans; i++) |
| device_remove_file(&pdev->dev, |
| &adc_dev->sens_attr[i].dev_attr); |
| |
| msm_adc_teardown_device_conv(pdev, adc_dev); |
| |
| kfree(adc_dev->fnames); |
| kfree(adc_dev->sens_attr); |
| kfree(adc_dev); |
| } |
| |
| static void msm_rpc_adc_teardown_devices(struct platform_device *pdev) |
| { |
| struct msm_adc_platform_data *pdata = pdev->dev.platform_data; |
| struct msm_adc_drv *msm_adc = platform_get_drvdata(pdev); |
| int i, rc = 0; |
| |
| for (i = 0; i < pdata->num_adc; i++) { |
| if (msm_adc->devs[i]) { |
| msm_rpc_adc_teardown_device(pdev, msm_adc->devs[i]); |
| msm_adc->devs[i] = NULL; |
| } else |
| break; |
| } |
| |
| if (msm_adc->dev_h) { |
| rc = daldevice_detach(msm_adc->dev_h); |
| if (rc) |
| dev_err(&pdev->dev, "Cannot detach from dal device\n"); |
| msm_adc->dev_h = NULL; |
| } |
| |
| } |
| |
| static void msm_adc_teardown_device(struct platform_device *pdev, |
| struct msm_adc_drv *msm_adc) |
| { |
| struct msm_adc_platform_data *pdata = pdev->dev.platform_data; |
| int i, num_chans = pdata->num_chan_supported; |
| |
| if (pdata->num_chan_supported > 0) { |
| if (msm_adc->sens_attr) |
| for (i = 0; i < num_chans; i++) |
| device_remove_file(&pdev->dev, |
| &msm_adc->sens_attr[i].dev_attr); |
| kfree(msm_adc->sens_attr); |
| } |
| } |
| |
| static void msm_adc_teardown(struct platform_device *pdev) |
| { |
| struct msm_adc_drv *msm_adc = platform_get_drvdata(pdev); |
| |
| if (!msm_adc) |
| return; |
| |
| misc_deregister(&msm_adc->misc); |
| |
| if (msm_adc->hwmon) |
| hwmon_device_unregister(msm_adc->hwmon); |
| |
| msm_rpc_adc_teardown_devices(pdev); |
| msm_adc_teardown_device(pdev, msm_adc); |
| |
| kfree(msm_adc); |
| platform_set_drvdata(pdev, NULL); |
| } |
| |
| static int __devinit msm_adc_device_conv_init(struct msm_adc_drv *msm_adc, |
| struct adc_dev *adc_dev) |
| { |
| struct platform_device *pdev = msm_adc->pdev; |
| struct dal_conv_state *conv_s = &adc_dev->conv; |
| struct dal_conv_slot *slot = conv_s->context; |
| int rc, i; |
| |
| sema_init(&conv_s->slot_count, MSM_ADC_DEV_MAX_INFLIGHT); |
| mutex_init(&conv_s->list_lock); |
| INIT_LIST_HEAD(&conv_s->slots); |
| |
| for (i = 0; i < MSM_ADC_DEV_MAX_INFLIGHT; i++) { |
| list_add(&slot->list, &conv_s->slots); |
| slot->cb_h = dalrpc_alloc_cb(msm_adc->dev_h, |
| msm_rpc_adc_conv_cb, slot); |
| if (!slot->cb_h) { |
| dev_err(&pdev->dev, "Unable to allocate DAL callback" |
| " for slot %d\n", i); |
| rc = -ENOMEM; |
| goto dal_err_cb; |
| } |
| init_completion(&slot->comp); |
| slot->idx = i; |
| slot++; |
| } |
| |
| return 0; |
| |
| dal_err_cb: |
| msm_adc_teardown_device_conv(pdev, adc_dev); |
| |
| return rc; |
| } |
| |
| static struct sensor_device_attribute msm_rpc_adc_curr_in_attr = |
| SENSOR_ATTR(NULL, S_IRUGO, msm_adc_show_curr, NULL, 0); |
| |
| static int __devinit msm_rpc_adc_device_init_hwmon(struct platform_device *pdev, |
| struct adc_dev *adc_dev) |
| { |
| struct dal_translation *transl = &adc_dev->transl; |
| int i, rc, num_chans = transl->hwmon_end - transl->hwmon_start + 1; |
| const char prefix[] = "curr", postfix[] = "_input"; |
| char tmpbuf[5]; |
| |
| adc_dev->fnames = kzalloc(num_chans * MSM_ADC_MAX_FNAME + |
| num_chans * sizeof(char *), GFP_KERNEL); |
| if (!adc_dev->fnames) { |
| dev_err(&pdev->dev, "Unable to allocate memory\n"); |
| return -ENOMEM; |
| } |
| |
| adc_dev->sens_attr = kzalloc(num_chans * |
| sizeof(struct sensor_device_attribute), GFP_KERNEL); |
| if (!adc_dev->sens_attr) { |
| dev_err(&pdev->dev, "Unable to allocate memory\n"); |
| rc = -ENOMEM; |
| goto hwmon_err_fnames; |
| } |
| |
| for (i = 0; i < num_chans; i++) { |
| adc_dev->fnames[i] = (char *)adc_dev->fnames + |
| i * MSM_ADC_MAX_FNAME + num_chans * sizeof(char *); |
| strcpy(adc_dev->fnames[i], prefix); |
| sprintf(tmpbuf, "%d", transl->hwmon_start + i); |
| strcat(adc_dev->fnames[i], tmpbuf); |
| strcat(adc_dev->fnames[i], postfix); |
| |
| msm_rpc_adc_curr_in_attr.index = transl->hwmon_start + i; |
| msm_rpc_adc_curr_in_attr.dev_attr.attr.name = |
| adc_dev->fnames[i]; |
| memcpy(&adc_dev->sens_attr[i], &msm_rpc_adc_curr_in_attr, |
| sizeof(msm_rpc_adc_curr_in_attr)); |
| |
| rc = device_create_file(&pdev->dev, |
| &adc_dev->sens_attr[i].dev_attr); |
| if (rc) { |
| dev_err(&pdev->dev, "device_create_file failed for " |
| "dal dev %u chan %d\n", |
| adc_dev->transl.dal_dev_idx, i); |
| goto hwmon_err_sens; |
| } |
| } |
| |
| return 0; |
| |
| hwmon_err_sens: |
| kfree(adc_dev->sens_attr); |
| hwmon_err_fnames: |
| kfree(adc_dev->fnames); |
| |
| return rc; |
| } |
| |
| static int __devinit msm_rpc_adc_device_init(struct platform_device *pdev) |
| { |
| struct msm_adc_platform_data *pdata = pdev->dev.platform_data; |
| struct msm_adc_drv *msm_adc = platform_get_drvdata(pdev); |
| struct adc_dev *adc_dev; |
| struct adc_dev_spec target; |
| int i, rc; |
| int hwmon_cntr = pdata->num_chan_supported; |
| |
| for (i = 0; i < pdata->num_adc; i++) { |
| adc_dev = kzalloc(sizeof(struct adc_dev), GFP_KERNEL); |
| if (!adc_dev) { |
| dev_err(&pdev->dev, "Unable to allocate memory\n"); |
| rc = -ENOMEM; |
| goto dev_init_err; |
| } |
| |
| msm_adc->devs[i] = adc_dev; |
| adc_dev->name = pdata->dev_names[i]; |
| |
| rc = msm_adc_device_conv_init(msm_adc, adc_dev); |
| if (rc) { |
| dev_err(&pdev->dev, "DAL device[%s] failed conv init\n", |
| adc_dev->name); |
| goto dev_init_err; |
| } |
| |
| if (!pdata->target_hw == MSM_8x25) { |
| /* DAL device lookup */ |
| rc = msm_adc_getinputproperties(msm_adc, adc_dev->name, |
| &target); |
| if (rc) { |
| dev_err(&pdev->dev, "No such DAL device[%s]\n", |
| adc_dev->name); |
| goto dev_init_err; |
| } |
| |
| adc_dev->transl.dal_dev_idx = target.dal.dev_idx; |
| adc_dev->nchans = target.dal.chan_idx; |
| } else { |
| /* On targets prior to MSM7x30 the remote driver has |
| only the channel list and no device id. */ |
| adc_dev->transl.dal_dev_idx = MSM_8x25_ADC_DEV_ID; |
| adc_dev->nchans = MSM_8x25_CHAN_ID; |
| } |
| |
| adc_dev->transl.hwmon_dev_idx = i; |
| adc_dev->transl.hwmon_start = hwmon_cntr; |
| adc_dev->transl.hwmon_end = hwmon_cntr + adc_dev->nchans - 1; |
| hwmon_cntr += adc_dev->nchans; |
| |
| rc = msm_rpc_adc_device_init_hwmon(pdev, adc_dev); |
| if (rc) |
| goto dev_init_err; |
| } |
| |
| return 0; |
| |
| dev_init_err: |
| msm_rpc_adc_teardown_devices(pdev); |
| return rc; |
| } |
| |
| static int __devinit msm_rpc_adc_init(struct platform_device *pdev1) |
| { |
| struct msm_adc_drv *msm_adc = msm_adc_drv; |
| struct platform_device *pdev = msm_adc->pdev; |
| struct msm_adc_platform_data *pdata = pdev->dev.platform_data; |
| int rc = 0; |
| |
| dev_dbg(&pdev->dev, "msm_rpc_adc_init called\n"); |
| |
| if (!pdata) { |
| dev_err(&pdev->dev, "no platform data?\n"); |
| return -EINVAL; |
| } |
| |
| mutex_init(&msm_adc->prop_lock); |
| |
| rc = daldevice_attach(MSM_ADC_DALRPC_DEVICEID, |
| MSM_ADC_DALRPC_PORT_NAME, |
| MSM_ADC_DALRPC_CPU, |
| &msm_adc->dev_h); |
| if (rc) { |
| dev_err(&pdev->dev, "Cannot attach to dal device\n"); |
| return rc; |
| } |
| |
| dev_dbg(&pdev->dev, "Attach to dal device Succeeded\n"); |
| |
| rc = msm_rpc_adc_device_init(pdev); |
| if (rc) { |
| dev_err(&pdev->dev, "msm_adc_dev_init failed\n"); |
| goto err_cleanup; |
| } |
| |
| init_waitqueue_head(&msm_adc->rpc_total_outst_wait); |
| atomic_set(&msm_adc->rpc_online, 1); |
| atomic_set(&msm_adc->rpc_total_outst, 0); |
| epm_init = true; |
| pr_info("msm_adc successfully registered\n"); |
| |
| return 0; |
| |
| err_cleanup: |
| msm_rpc_adc_teardown_devices(pdev); |
| |
| return rc; |
| } |
| |
| /* |
| * Process the deferred job |
| */ |
| void msm_adc_wq_work(struct work_struct *work) |
| { |
| struct adc_properties *adc_properties; |
| struct adc_conv_slot *slot = container_of(work, |
| struct adc_conv_slot, work); |
| uint32_t idx = slot->conv.result.chan; |
| struct msm_adc_platform_data *pdata = |
| msm_adc_drv->pdev->dev.platform_data; |
| struct msm_adc_channels *channel = &pdata->channel[idx]; |
| int32_t adc_code; |
| |
| switch (slot->adc_request) { |
| case START_OF_CONV: |
| channel->adc_access_fn->adc_select_chan_and_start_conv( |
| channel->adc_dev_instance, slot); |
| break; |
| case END_OF_CONV: |
| adc_properties = channel->adc_access_fn->adc_get_properties( |
| channel->adc_dev_instance); |
| if (channel->adc_access_fn->adc_read_adc_code) |
| channel->adc_access_fn->adc_read_adc_code( |
| channel->adc_dev_instance, &adc_code); |
| if (channel->chan_processor) |
| channel->chan_processor(adc_code, adc_properties, |
| &slot->chan_properties, &slot->conv.result); |
| /* Intentionally a fall thru here. Calibraton does not need |
| to perform channel processing, etc. However, both |
| end of conversion and end of calibration requires the below |
| fall thru code to be executed. */ |
| case END_OF_CALIBRATION: |
| /* for blocking requests, signal complete */ |
| if (slot->blocking) |
| complete(&slot->comp); |
| else { |
| struct msm_client_data *client = slot->client; |
| |
| mutex_lock(&client->lock); |
| |
| if (slot->adc_request == END_OF_CONV) { |
| list_add(&slot->list, &client->complete_list); |
| client->num_complete++; |
| } |
| client->num_outstanding--; |
| |
| /* |
| * if the client release has been invoked and this is call |
| * corresponds to the last request, then signal release |
| * to complete. |
| */ |
| if (slot->client->online == 0 && |
| client->num_outstanding == 0) |
| wake_up_interruptible_all(&client->outst_wait); |
| |
| mutex_unlock(&client->lock); |
| |
| wake_up_interruptible_all(&client->data_wait); |
| |
| atomic_dec(&msm_adc_drv->total_outst); |
| |
| /* verify driver remove has not been invoked */ |
| if (atomic_read(&msm_adc_drv->online) == 0 && |
| atomic_read(&msm_adc_drv->total_outst) == 0) |
| wake_up_interruptible_all( |
| &msm_adc_drv->total_outst_wait); |
| |
| if (slot->compk) /* Kernel space request */ |
| complete(slot->compk); |
| if (slot->adc_request == END_OF_CALIBRATION) |
| channel->adc_access_fn->adc_restore_slot( |
| channel->adc_dev_instance, slot); |
| } |
| break; |
| case START_OF_CALIBRATION: /* code here to please code reviewers |
| to satisfy silly compiler warnings */ |
| break; |
| } |
| } |
| |
| static struct sensor_device_attribute msm_adc_curr_in_attr = |
| SENSOR_ATTR(NULL, S_IRUGO, msm_adc_show_curr, NULL, 0); |
| |
| static int __devinit msm_adc_init_hwmon(struct platform_device *pdev, |
| struct msm_adc_drv *msm_adc) |
| { |
| struct msm_adc_platform_data *pdata = pdev->dev.platform_data; |
| struct msm_adc_channels *channel = pdata->channel; |
| int i, rc, num_chans = pdata->num_chan_supported; |
| |
| if (!channel) |
| return -EINVAL; |
| |
| msm_adc->sens_attr = kzalloc(num_chans * |
| sizeof(struct sensor_device_attribute), GFP_KERNEL); |
| if (!msm_adc->sens_attr) { |
| dev_err(&pdev->dev, "Unable to allocate memory\n"); |
| rc = -ENOMEM; |
| goto hwmon_err_sens; |
| } |
| |
| for (i = 0; i < num_chans; i++) { |
| msm_adc_curr_in_attr.index = i; |
| msm_adc_curr_in_attr.dev_attr.attr.name = channel[i].name; |
| memcpy(&msm_adc->sens_attr[i], &msm_adc_curr_in_attr, |
| sizeof(msm_adc_curr_in_attr)); |
| |
| rc = device_create_file(&pdev->dev, |
| &msm_adc->sens_attr[i].dev_attr); |
| if (rc) { |
| dev_err(&pdev->dev, "device_create_file failed for " |
| "dal dev %s\n", |
| channel[i].name); |
| goto hwmon_err_sens; |
| } |
| } |
| |
| return 0; |
| |
| hwmon_err_sens: |
| kfree(msm_adc->sens_attr); |
| |
| return rc; |
| } |
| |
| static struct platform_driver msm_adc_rpcrouter_remote_driver = { |
| .probe = msm_rpc_adc_init, |
| .driver = { |
| .name = MSM_ADC_DALRPC_PORT_NAME, |
| .owner = THIS_MODULE, |
| }, |
| }; |
| |
| static int __devinit msm_adc_probe(struct platform_device *pdev) |
| { |
| struct msm_adc_platform_data *pdata = pdev->dev.platform_data; |
| struct msm_adc_drv *msm_adc; |
| int rc = 0; |
| |
| if (!pdata) { |
| dev_err(&pdev->dev, "no platform data?\n"); |
| return -EINVAL; |
| } |
| |
| msm_adc = kzalloc(sizeof(struct msm_adc_drv), GFP_KERNEL); |
| if (!msm_adc) { |
| dev_err(&pdev->dev, "Unable to allocate memory\n"); |
| return -ENOMEM; |
| } |
| |
| platform_set_drvdata(pdev, msm_adc); |
| msm_adc_drv = msm_adc; |
| msm_adc->pdev = pdev; |
| |
| if (pdata->target_hw == MSM_8x60 || pdata->target_hw == FSM_9xxx) { |
| rc = msm_adc_init_hwmon(pdev, msm_adc); |
| if (rc) { |
| dev_err(&pdev->dev, "msm_adc_dev_init failed\n"); |
| goto err_cleanup; |
| } |
| } |
| |
| msm_adc->hwmon = hwmon_device_register(&pdev->dev); |
| if (IS_ERR(msm_adc->hwmon)) { |
| dev_err(&pdev->dev, "hwmon_device_register failed\n"); |
| rc = PTR_ERR(msm_adc->hwmon); |
| goto err_cleanup; |
| } |
| |
| msm_adc->misc.name = MSM_ADC_DRIVER_NAME; |
| msm_adc->misc.minor = MISC_DYNAMIC_MINOR; |
| msm_adc->misc.fops = &msm_adc_fops; |
| |
| if (misc_register(&msm_adc->misc)) { |
| dev_err(&pdev->dev, "Unable to register misc device!\n"); |
| goto err_cleanup; |
| } |
| |
| init_waitqueue_head(&msm_adc->total_outst_wait); |
| atomic_set(&msm_adc->online, 1); |
| atomic_set(&msm_adc->total_outst, 0); |
| |
| msm_adc->wq = create_singlethread_workqueue("msm_adc"); |
| if (!msm_adc->wq) |
| goto err_cleanup; |
| |
| if (pdata->num_adc > 0) { |
| if (pdata->target_hw == MSM_8x60) |
| platform_driver_register( |
| &msm_adc_rpcrouter_remote_driver); |
| else |
| msm_rpc_adc_init(pdev); |
| } |
| conv_first_request = true; |
| |
| pr_info("msm_adc successfully registered\n"); |
| |
| return 0; |
| |
| err_cleanup: |
| msm_adc_teardown(pdev); |
| |
| return rc; |
| } |
| |
| static int __devexit msm_adc_remove(struct platform_device *pdev) |
| { |
| int rc; |
| |
| struct msm_adc_drv *msm_adc = platform_get_drvdata(pdev); |
| |
| atomic_set(&msm_adc->online, 0); |
| |
| atomic_set(&msm_adc->rpc_online, 0); |
| |
| misc_deregister(&msm_adc->misc); |
| |
| hwmon_device_unregister(msm_adc->hwmon); |
| msm_adc->hwmon = NULL; |
| |
| /* |
| * We may still have outstanding transactions in flight that have not |
| * completed. Make sure they're completed before tearing down. |
| */ |
| rc = wait_event_interruptible(msm_adc->total_outst_wait, |
| atomic_read(&msm_adc->total_outst) == 0); |
| if (rc) { |
| pr_err("%s: wait_event_interruptible failed rc = %d\n", |
| __func__, rc); |
| return rc; |
| } |
| |
| rc = wait_event_interruptible(msm_adc->rpc_total_outst_wait, |
| atomic_read(&msm_adc->rpc_total_outst) == 0); |
| if (rc) { |
| pr_err("%s: wait_event_interruptible failed rc = %d\n", |
| __func__, rc); |
| return rc; |
| } |
| |
| msm_adc_teardown(pdev); |
| |
| pr_info("msm_adc unregistered\n"); |
| |
| return 0; |
| } |
| |
| static struct platform_driver msm_adc_driver = { |
| .probe = msm_adc_probe, |
| .remove = __devexit_p(msm_adc_remove), |
| .driver = { |
| .name = MSM_ADC_DRIVER_NAME, |
| .owner = THIS_MODULE, |
| }, |
| }; |
| |
| static int __init msm_adc_init(void) |
| { |
| return platform_driver_register(&msm_adc_driver); |
| } |
| module_init(msm_adc_init); |
| |
| static void __exit msm_adc_exit(void) |
| { |
| platform_driver_unregister(&msm_adc_driver); |
| } |
| module_exit(msm_adc_exit); |
| |
| MODULE_DESCRIPTION("MSM ADC Driver"); |
| MODULE_ALIAS("platform:msm_adc"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_VERSION("0.1"); |