| /* |
| * Copyright (C)2002 USAGI/WIDE Project |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| * |
| * Authors |
| * |
| * Mitsuru KANDA @USAGI : IPv6 Support |
| * Kazunori MIYAZAWA @USAGI : |
| * Kunihiro Ishiguro <kunihiro@ipinfusion.com> |
| * |
| * This file is derived from net/ipv4/ah.c. |
| */ |
| |
| #include <linux/module.h> |
| #include <net/ip.h> |
| #include <net/ah.h> |
| #include <linux/crypto.h> |
| #include <linux/pfkeyv2.h> |
| #include <linux/spinlock.h> |
| #include <linux/string.h> |
| #include <net/icmp.h> |
| #include <net/ipv6.h> |
| #include <net/protocol.h> |
| #include <net/xfrm.h> |
| #include <asm/scatterlist.h> |
| |
| static int zero_out_mutable_opts(struct ipv6_opt_hdr *opthdr) |
| { |
| u8 *opt = (u8 *)opthdr; |
| int len = ipv6_optlen(opthdr); |
| int off = 0; |
| int optlen = 0; |
| |
| off += 2; |
| len -= 2; |
| |
| while (len > 0) { |
| |
| switch (opt[off]) { |
| |
| case IPV6_TLV_PAD0: |
| optlen = 1; |
| break; |
| default: |
| if (len < 2) |
| goto bad; |
| optlen = opt[off+1]+2; |
| if (len < optlen) |
| goto bad; |
| if (opt[off] & 0x20) |
| memset(&opt[off+2], 0, opt[off+1]); |
| break; |
| } |
| |
| off += optlen; |
| len -= optlen; |
| } |
| if (len == 0) |
| return 1; |
| |
| bad: |
| return 0; |
| } |
| |
| #if defined(CONFIG_IPV6_MIP6) || defined(CONFIG_IPV6_MIP6_MODULE) |
| /** |
| * ipv6_rearrange_destopt - rearrange IPv6 destination options header |
| * @iph: IPv6 header |
| * @destopt: destionation options header |
| */ |
| static void ipv6_rearrange_destopt(struct ipv6hdr *iph, struct ipv6_opt_hdr *destopt) |
| { |
| u8 *opt = (u8 *)destopt; |
| int len = ipv6_optlen(destopt); |
| int off = 0; |
| int optlen = 0; |
| |
| off += 2; |
| len -= 2; |
| |
| while (len > 0) { |
| |
| switch (opt[off]) { |
| |
| case IPV6_TLV_PAD0: |
| optlen = 1; |
| break; |
| default: |
| if (len < 2) |
| goto bad; |
| optlen = opt[off+1]+2; |
| if (len < optlen) |
| goto bad; |
| |
| /* Rearrange the source address in @iph and the |
| * addresses in home address option for final source. |
| * See 11.3.2 of RFC 3775 for details. |
| */ |
| if (opt[off] == IPV6_TLV_HAO) { |
| struct in6_addr final_addr; |
| struct ipv6_destopt_hao *hao; |
| |
| hao = (struct ipv6_destopt_hao *)&opt[off]; |
| if (hao->length != sizeof(hao->addr)) { |
| if (net_ratelimit()) |
| printk(KERN_WARNING "destopt hao: invalid header length: %u\n", hao->length); |
| goto bad; |
| } |
| ipv6_addr_copy(&final_addr, &hao->addr); |
| ipv6_addr_copy(&hao->addr, &iph->saddr); |
| ipv6_addr_copy(&iph->saddr, &final_addr); |
| } |
| break; |
| } |
| |
| off += optlen; |
| len -= optlen; |
| } |
| /* Note: ok if len == 0 */ |
| bad: |
| return; |
| } |
| #else |
| static void ipv6_rearrange_destopt(struct ipv6hdr *iph, struct ipv6_opt_hdr *destopt) {} |
| #endif |
| |
| /** |
| * ipv6_rearrange_rthdr - rearrange IPv6 routing header |
| * @iph: IPv6 header |
| * @rthdr: routing header |
| * |
| * Rearrange the destination address in @iph and the addresses in @rthdr |
| * so that they appear in the order they will at the final destination. |
| * See Appendix A2 of RFC 2402 for details. |
| */ |
| static void ipv6_rearrange_rthdr(struct ipv6hdr *iph, struct ipv6_rt_hdr *rthdr) |
| { |
| int segments, segments_left; |
| struct in6_addr *addrs; |
| struct in6_addr final_addr; |
| |
| segments_left = rthdr->segments_left; |
| if (segments_left == 0) |
| return; |
| rthdr->segments_left = 0; |
| |
| /* The value of rthdr->hdrlen has been verified either by the system |
| * call if it is locally generated, or by ipv6_rthdr_rcv() for incoming |
| * packets. So we can assume that it is even and that segments is |
| * greater than or equal to segments_left. |
| * |
| * For the same reason we can assume that this option is of type 0. |
| */ |
| segments = rthdr->hdrlen >> 1; |
| |
| addrs = ((struct rt0_hdr *)rthdr)->addr; |
| ipv6_addr_copy(&final_addr, addrs + segments - 1); |
| |
| addrs += segments - segments_left; |
| memmove(addrs + 1, addrs, (segments_left - 1) * sizeof(*addrs)); |
| |
| ipv6_addr_copy(addrs, &iph->daddr); |
| ipv6_addr_copy(&iph->daddr, &final_addr); |
| } |
| |
| static int ipv6_clear_mutable_options(struct ipv6hdr *iph, int len, int dir) |
| { |
| union { |
| struct ipv6hdr *iph; |
| struct ipv6_opt_hdr *opth; |
| struct ipv6_rt_hdr *rth; |
| char *raw; |
| } exthdr = { .iph = iph }; |
| char *end = exthdr.raw + len; |
| int nexthdr = iph->nexthdr; |
| |
| exthdr.iph++; |
| |
| while (exthdr.raw < end) { |
| switch (nexthdr) { |
| case NEXTHDR_DEST: |
| if (dir == XFRM_POLICY_OUT) |
| ipv6_rearrange_destopt(iph, exthdr.opth); |
| case NEXTHDR_HOP: |
| if (!zero_out_mutable_opts(exthdr.opth)) { |
| LIMIT_NETDEBUG( |
| KERN_WARNING "overrun %sopts\n", |
| nexthdr == NEXTHDR_HOP ? |
| "hop" : "dest"); |
| return -EINVAL; |
| } |
| break; |
| |
| case NEXTHDR_ROUTING: |
| ipv6_rearrange_rthdr(iph, exthdr.rth); |
| break; |
| |
| default : |
| return 0; |
| } |
| |
| nexthdr = exthdr.opth->nexthdr; |
| exthdr.raw += ipv6_optlen(exthdr.opth); |
| } |
| |
| return 0; |
| } |
| |
| static int ah6_output(struct xfrm_state *x, struct sk_buff *skb) |
| { |
| int err; |
| int extlen; |
| struct ipv6hdr *top_iph; |
| struct ip_auth_hdr *ah; |
| struct ah_data *ahp; |
| u8 nexthdr; |
| char tmp_base[8]; |
| struct { |
| #if defined(CONFIG_IPV6_MIP6) || defined(CONFIG_IPV6_MIP6_MODULE) |
| struct in6_addr saddr; |
| #endif |
| struct in6_addr daddr; |
| char hdrs[0]; |
| } *tmp_ext; |
| |
| skb_push(skb, -skb_network_offset(skb)); |
| top_iph = ipv6_hdr(skb); |
| top_iph->payload_len = htons(skb->len - sizeof(*top_iph)); |
| |
| nexthdr = *skb_mac_header(skb); |
| *skb_mac_header(skb) = IPPROTO_AH; |
| |
| /* When there are no extension headers, we only need to save the first |
| * 8 bytes of the base IP header. |
| */ |
| memcpy(tmp_base, top_iph, sizeof(tmp_base)); |
| |
| tmp_ext = NULL; |
| extlen = skb_transport_offset(skb) - sizeof(struct ipv6hdr); |
| if (extlen) { |
| extlen += sizeof(*tmp_ext); |
| tmp_ext = kmalloc(extlen, GFP_ATOMIC); |
| if (!tmp_ext) { |
| err = -ENOMEM; |
| goto error; |
| } |
| #if defined(CONFIG_IPV6_MIP6) || defined(CONFIG_IPV6_MIP6_MODULE) |
| memcpy(tmp_ext, &top_iph->saddr, extlen); |
| #else |
| memcpy(tmp_ext, &top_iph->daddr, extlen); |
| #endif |
| err = ipv6_clear_mutable_options(top_iph, |
| extlen - sizeof(*tmp_ext) + |
| sizeof(*top_iph), |
| XFRM_POLICY_OUT); |
| if (err) |
| goto error_free_iph; |
| } |
| |
| ah = ip_auth_hdr(skb); |
| ah->nexthdr = nexthdr; |
| |
| top_iph->priority = 0; |
| top_iph->flow_lbl[0] = 0; |
| top_iph->flow_lbl[1] = 0; |
| top_iph->flow_lbl[2] = 0; |
| top_iph->hop_limit = 0; |
| |
| ahp = x->data; |
| ah->hdrlen = (XFRM_ALIGN8(sizeof(*ah) + ahp->icv_trunc_len) >> 2) - 2; |
| |
| ah->reserved = 0; |
| ah->spi = x->id.spi; |
| ah->seq_no = htonl(XFRM_SKB_CB(skb)->seq); |
| |
| spin_lock_bh(&x->lock); |
| err = ah_mac_digest(ahp, skb, ah->auth_data); |
| memcpy(ah->auth_data, ahp->work_icv, ahp->icv_trunc_len); |
| spin_unlock_bh(&x->lock); |
| |
| if (err) |
| goto error_free_iph; |
| |
| memcpy(top_iph, tmp_base, sizeof(tmp_base)); |
| if (tmp_ext) { |
| #if defined(CONFIG_IPV6_MIP6) || defined(CONFIG_IPV6_MIP6_MODULE) |
| memcpy(&top_iph->saddr, tmp_ext, extlen); |
| #else |
| memcpy(&top_iph->daddr, tmp_ext, extlen); |
| #endif |
| error_free_iph: |
| kfree(tmp_ext); |
| } |
| |
| error: |
| return err; |
| } |
| |
| static int ah6_input(struct xfrm_state *x, struct sk_buff *skb) |
| { |
| /* |
| * Before process AH |
| * [IPv6][Ext1][Ext2][AH][Dest][Payload] |
| * |<-------------->| hdr_len |
| * |
| * To erase AH: |
| * Keeping copy of cleared headers. After AH processing, |
| * Moving the pointer of skb->network_header by using skb_pull as long |
| * as AH header length. Then copy back the copy as long as hdr_len |
| * If destination header following AH exists, copy it into after [Ext2]. |
| * |
| * |<>|[IPv6][Ext1][Ext2][Dest][Payload] |
| * There is offset of AH before IPv6 header after the process. |
| */ |
| |
| struct ip_auth_hdr *ah; |
| struct ipv6hdr *ip6h; |
| struct ah_data *ahp; |
| unsigned char *tmp_hdr = NULL; |
| u16 hdr_len; |
| u16 ah_hlen; |
| int nexthdr; |
| int err = -EINVAL; |
| |
| if (!pskb_may_pull(skb, sizeof(struct ip_auth_hdr))) |
| goto out; |
| |
| /* We are going to _remove_ AH header to keep sockets happy, |
| * so... Later this can change. */ |
| if (skb_cloned(skb) && |
| pskb_expand_head(skb, 0, 0, GFP_ATOMIC)) |
| goto out; |
| |
| hdr_len = skb->data - skb_network_header(skb); |
| ah = (struct ip_auth_hdr *)skb->data; |
| ahp = x->data; |
| nexthdr = ah->nexthdr; |
| ah_hlen = (ah->hdrlen + 2) << 2; |
| |
| if (ah_hlen != XFRM_ALIGN8(sizeof(*ah) + ahp->icv_full_len) && |
| ah_hlen != XFRM_ALIGN8(sizeof(*ah) + ahp->icv_trunc_len)) |
| goto out; |
| |
| if (!pskb_may_pull(skb, ah_hlen)) |
| goto out; |
| |
| tmp_hdr = kmemdup(skb_network_header(skb), hdr_len, GFP_ATOMIC); |
| if (!tmp_hdr) |
| goto out; |
| ip6h = ipv6_hdr(skb); |
| if (ipv6_clear_mutable_options(ip6h, hdr_len, XFRM_POLICY_IN)) |
| goto free_out; |
| ip6h->priority = 0; |
| ip6h->flow_lbl[0] = 0; |
| ip6h->flow_lbl[1] = 0; |
| ip6h->flow_lbl[2] = 0; |
| ip6h->hop_limit = 0; |
| |
| { |
| u8 auth_data[MAX_AH_AUTH_LEN]; |
| |
| memcpy(auth_data, ah->auth_data, ahp->icv_trunc_len); |
| memset(ah->auth_data, 0, ahp->icv_trunc_len); |
| skb_push(skb, hdr_len); |
| err = ah_mac_digest(ahp, skb, ah->auth_data); |
| if (err) |
| goto free_out; |
| err = -EINVAL; |
| if (memcmp(ahp->work_icv, auth_data, ahp->icv_trunc_len)) { |
| LIMIT_NETDEBUG(KERN_WARNING "ipsec ah authentication error\n"); |
| x->stats.integrity_failed++; |
| goto free_out; |
| } |
| } |
| |
| skb->network_header += ah_hlen; |
| memcpy(skb_network_header(skb), tmp_hdr, hdr_len); |
| skb->transport_header = skb->network_header; |
| __skb_pull(skb, ah_hlen + hdr_len); |
| |
| kfree(tmp_hdr); |
| |
| return nexthdr; |
| |
| free_out: |
| kfree(tmp_hdr); |
| out: |
| return err; |
| } |
| |
| static void ah6_err(struct sk_buff *skb, struct inet6_skb_parm *opt, |
| int type, int code, int offset, __be32 info) |
| { |
| struct ipv6hdr *iph = (struct ipv6hdr*)skb->data; |
| struct ip_auth_hdr *ah = (struct ip_auth_hdr*)(skb->data+offset); |
| struct xfrm_state *x; |
| |
| if (type != ICMPV6_DEST_UNREACH && |
| type != ICMPV6_PKT_TOOBIG) |
| return; |
| |
| x = xfrm_state_lookup((xfrm_address_t *)&iph->daddr, ah->spi, IPPROTO_AH, AF_INET6); |
| if (!x) |
| return; |
| |
| NETDEBUG(KERN_DEBUG "pmtu discovery on SA AH/%08x/" NIP6_FMT "\n", |
| ntohl(ah->spi), NIP6(iph->daddr)); |
| |
| xfrm_state_put(x); |
| } |
| |
| static int ah6_init_state(struct xfrm_state *x) |
| { |
| struct ah_data *ahp = NULL; |
| struct xfrm_algo_desc *aalg_desc; |
| struct crypto_hash *tfm; |
| |
| if (!x->aalg) |
| goto error; |
| |
| if (x->encap) |
| goto error; |
| |
| ahp = kzalloc(sizeof(*ahp), GFP_KERNEL); |
| if (ahp == NULL) |
| return -ENOMEM; |
| |
| tfm = crypto_alloc_hash(x->aalg->alg_name, 0, CRYPTO_ALG_ASYNC); |
| if (IS_ERR(tfm)) |
| goto error; |
| |
| ahp->tfm = tfm; |
| if (crypto_hash_setkey(tfm, x->aalg->alg_key, |
| (x->aalg->alg_key_len + 7) / 8)) |
| goto error; |
| |
| /* |
| * Lookup the algorithm description maintained by xfrm_algo, |
| * verify crypto transform properties, and store information |
| * we need for AH processing. This lookup cannot fail here |
| * after a successful crypto_alloc_hash(). |
| */ |
| aalg_desc = xfrm_aalg_get_byname(x->aalg->alg_name, 0); |
| BUG_ON(!aalg_desc); |
| |
| if (aalg_desc->uinfo.auth.icv_fullbits/8 != |
| crypto_hash_digestsize(tfm)) { |
| printk(KERN_INFO "AH: %s digestsize %u != %hu\n", |
| x->aalg->alg_name, crypto_hash_digestsize(tfm), |
| aalg_desc->uinfo.auth.icv_fullbits/8); |
| goto error; |
| } |
| |
| ahp->icv_full_len = aalg_desc->uinfo.auth.icv_fullbits/8; |
| ahp->icv_trunc_len = aalg_desc->uinfo.auth.icv_truncbits/8; |
| |
| BUG_ON(ahp->icv_trunc_len > MAX_AH_AUTH_LEN); |
| |
| ahp->work_icv = kmalloc(ahp->icv_full_len, GFP_KERNEL); |
| if (!ahp->work_icv) |
| goto error; |
| |
| x->props.header_len = XFRM_ALIGN8(sizeof(struct ip_auth_hdr) + |
| ahp->icv_trunc_len); |
| if (x->props.mode == XFRM_MODE_TUNNEL) |
| x->props.header_len += sizeof(struct ipv6hdr); |
| x->data = ahp; |
| |
| return 0; |
| |
| error: |
| if (ahp) { |
| kfree(ahp->work_icv); |
| crypto_free_hash(ahp->tfm); |
| kfree(ahp); |
| } |
| return -EINVAL; |
| } |
| |
| static void ah6_destroy(struct xfrm_state *x) |
| { |
| struct ah_data *ahp = x->data; |
| |
| if (!ahp) |
| return; |
| |
| kfree(ahp->work_icv); |
| ahp->work_icv = NULL; |
| crypto_free_hash(ahp->tfm); |
| ahp->tfm = NULL; |
| kfree(ahp); |
| } |
| |
| static struct xfrm_type ah6_type = |
| { |
| .description = "AH6", |
| .owner = THIS_MODULE, |
| .proto = IPPROTO_AH, |
| .flags = XFRM_TYPE_REPLAY_PROT, |
| .init_state = ah6_init_state, |
| .destructor = ah6_destroy, |
| .input = ah6_input, |
| .output = ah6_output, |
| .hdr_offset = xfrm6_find_1stfragopt, |
| }; |
| |
| static struct inet6_protocol ah6_protocol = { |
| .handler = xfrm6_rcv, |
| .err_handler = ah6_err, |
| .flags = INET6_PROTO_NOPOLICY, |
| }; |
| |
| static int __init ah6_init(void) |
| { |
| if (xfrm_register_type(&ah6_type, AF_INET6) < 0) { |
| printk(KERN_INFO "ipv6 ah init: can't add xfrm type\n"); |
| return -EAGAIN; |
| } |
| |
| if (inet6_add_protocol(&ah6_protocol, IPPROTO_AH) < 0) { |
| printk(KERN_INFO "ipv6 ah init: can't add protocol\n"); |
| xfrm_unregister_type(&ah6_type, AF_INET6); |
| return -EAGAIN; |
| } |
| |
| return 0; |
| } |
| |
| static void __exit ah6_fini(void) |
| { |
| if (inet6_del_protocol(&ah6_protocol, IPPROTO_AH) < 0) |
| printk(KERN_INFO "ipv6 ah close: can't remove protocol\n"); |
| |
| if (xfrm_unregister_type(&ah6_type, AF_INET6) < 0) |
| printk(KERN_INFO "ipv6 ah close: can't remove xfrm type\n"); |
| |
| } |
| |
| module_init(ah6_init); |
| module_exit(ah6_fini); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS_XFRM_TYPE(AF_INET6, XFRM_PROTO_AH); |