| /* |
| * Definitions for the FTDI USB Single Port Serial Converter - |
| * known as FTDI_SIO (Serial Input/Output application of the chipset) |
| * |
| * The example I have is known as the USC-1000 which is available from |
| * http://www.dse.co.nz - cat no XH4214 It looks similar to this: |
| * http://www.dansdata.com/usbser.htm but I can't be sure There are other |
| * USC-1000s which don't look like my device though so beware! |
| * |
| * The device is based on the FTDI FT8U100AX chip. It has a DB25 on one side, |
| * USB on the other. |
| * |
| * Thanx to FTDI (http://www.ftdi.co.uk) for so kindly providing details |
| * of the protocol required to talk to the device and ongoing assistence |
| * during development. |
| * |
| * Bill Ryder - bryder@sgi.com formerly of Silicon Graphics, Inc.- wrote the |
| * FTDI_SIO implementation. |
| * |
| * Philipp Gühring - pg@futureware.at - added the Device ID of the USB relais |
| * from Rudolf Gugler |
| * |
| */ |
| |
| #define FTDI_VID 0x0403 /* Vendor Id */ |
| #define FTDI_SIO_PID 0x8372 /* Product Id SIO application of 8U100AX */ |
| #define FTDI_8U232AM_PID 0x6001 /* Similar device to SIO above */ |
| #define FTDI_8U232AM_ALT_PID 0x6006 /* FTDI's alternate PID for above */ |
| #define FTDI_8U2232C_PID 0x6010 /* Dual channel device */ |
| #define FTDI_RELAIS_PID 0xFA10 /* Relais device from Rudolf Gugler */ |
| #define FTDI_NF_RIC_VID 0x0DCD /* Vendor Id */ |
| #define FTDI_NF_RIC_PID 0x0001 /* Product Id */ |
| |
| |
| /* ACT Solutions HomePro ZWave interface (http://www.act-solutions.com/HomePro.htm) */ |
| #define FTDI_ACTZWAVE_PID 0xF2D0 |
| |
| |
| /* www.irtrans.de device */ |
| #define FTDI_IRTRANS_PID 0xFC60 /* Product Id */ |
| |
| |
| /* www.thoughttechnology.com/ TT-USB provide with procomp use ftdi_sio */ |
| #define FTDI_TTUSB_PID 0xFF20 /* Product Id */ |
| |
| /* iPlus device */ |
| #define FTDI_IPLUS_PID 0xD070 /* Product Id */ |
| |
| /* www.crystalfontz.com devices - thanx for providing free devices for evaluation ! */ |
| /* they use the ftdi chipset for the USB interface and the vendor id is the same */ |
| #define FTDI_XF_632_PID 0xFC08 /* 632: 16x2 Character Display */ |
| #define FTDI_XF_634_PID 0xFC09 /* 634: 20x4 Character Display */ |
| #define FTDI_XF_547_PID 0xFC0A /* 547: Two line Display */ |
| #define FTDI_XF_633_PID 0xFC0B /* 633: 16x2 Character Display with Keys */ |
| #define FTDI_XF_631_PID 0xFC0C /* 631: 20x2 Character Display */ |
| #define FTDI_XF_635_PID 0xFC0D /* 635: 20x4 Character Display */ |
| #define FTDI_XF_640_PID 0xFC0E /* 640: Two line Display */ |
| #define FTDI_XF_642_PID 0xFC0F /* 642: Two line Display */ |
| |
| /* Video Networks Limited / Homechoice in the UK use an ftdi-based device for their 1Mb */ |
| /* broadband internet service. The following PID is exhibited by the usb device supplied */ |
| /* (the VID is the standard ftdi vid (FTDI_VID) */ |
| #define FTDI_VNHCPCUSB_D_PID 0xfe38 /* Product Id */ |
| |
| /* |
| * PCDJ use ftdi based dj-controllers. The following PID is for their DAC-2 device |
| * http://www.pcdjhardware.com/DAC2.asp (PID sent by Wouter Paesen) |
| * (the VID is the standard ftdi vid (FTDI_VID) */ |
| #define FTDI_PCDJ_DAC2_PID 0xFA88 |
| |
| /* |
| * The following are the values for the Matrix Orbital LCD displays, |
| * which are the FT232BM ( similar to the 8U232AM ) |
| */ |
| #define FTDI_MTXORB_0_PID 0xFA00 /* Matrix Orbital Product Id */ |
| #define FTDI_MTXORB_1_PID 0xFA01 /* Matrix Orbital Product Id */ |
| #define FTDI_MTXORB_2_PID 0xFA02 /* Matrix Orbital Product Id */ |
| #define FTDI_MTXORB_3_PID 0xFA03 /* Matrix Orbital Product Id */ |
| #define FTDI_MTXORB_4_PID 0xFA04 /* Matrix Orbital Product Id */ |
| #define FTDI_MTXORB_5_PID 0xFA05 /* Matrix Orbital Product Id */ |
| #define FTDI_MTXORB_6_PID 0xFA06 /* Matrix Orbital Product Id */ |
| |
| /* Interbiometrics USB I/O Board */ |
| /* Developed for Interbiometrics by Rudolf Gugler */ |
| #define INTERBIOMETRICS_VID 0x1209 |
| #define INTERBIOMETRICS_IOBOARD_PID 0x1002 |
| #define INTERBIOMETRICS_MINI_IOBOARD_PID 0x1006 |
| |
| /* |
| * The following are the values for the Perle Systems |
| * UltraPort USB serial converters |
| */ |
| #define FTDI_PERLE_ULTRAPORT_PID 0xF0C0 /* Perle UltraPort Product Id */ |
| |
| /* |
| * The following are the values for the Sealevel SeaLINK+ adapters. |
| * (Original list sent by Tuan Hoang. Ian Abbott renamed the macros and |
| * removed some PIDs that don't seem to match any existing products.) |
| */ |
| #define SEALEVEL_VID 0x0c52 /* Sealevel Vendor ID */ |
| #define SEALEVEL_2101_PID 0x2101 /* SeaLINK+232 (2101/2105) */ |
| #define SEALEVEL_2102_PID 0x2102 /* SeaLINK+485 (2102) */ |
| #define SEALEVEL_2103_PID 0x2103 /* SeaLINK+232I (2103) */ |
| #define SEALEVEL_2104_PID 0x2104 /* SeaLINK+485I (2104) */ |
| #define SEALEVEL_2201_1_PID 0x2211 /* SeaPORT+2/232 (2201) Port 1 */ |
| #define SEALEVEL_2201_2_PID 0x2221 /* SeaPORT+2/232 (2201) Port 2 */ |
| #define SEALEVEL_2202_1_PID 0x2212 /* SeaPORT+2/485 (2202) Port 1 */ |
| #define SEALEVEL_2202_2_PID 0x2222 /* SeaPORT+2/485 (2202) Port 2 */ |
| #define SEALEVEL_2203_1_PID 0x2213 /* SeaPORT+2 (2203) Port 1 */ |
| #define SEALEVEL_2203_2_PID 0x2223 /* SeaPORT+2 (2203) Port 2 */ |
| #define SEALEVEL_2401_1_PID 0x2411 /* SeaPORT+4/232 (2401) Port 1 */ |
| #define SEALEVEL_2401_2_PID 0x2421 /* SeaPORT+4/232 (2401) Port 2 */ |
| #define SEALEVEL_2401_3_PID 0x2431 /* SeaPORT+4/232 (2401) Port 3 */ |
| #define SEALEVEL_2401_4_PID 0x2441 /* SeaPORT+4/232 (2401) Port 4 */ |
| #define SEALEVEL_2402_1_PID 0x2412 /* SeaPORT+4/485 (2402) Port 1 */ |
| #define SEALEVEL_2402_2_PID 0x2422 /* SeaPORT+4/485 (2402) Port 2 */ |
| #define SEALEVEL_2402_3_PID 0x2432 /* SeaPORT+4/485 (2402) Port 3 */ |
| #define SEALEVEL_2402_4_PID 0x2442 /* SeaPORT+4/485 (2402) Port 4 */ |
| #define SEALEVEL_2403_1_PID 0x2413 /* SeaPORT+4 (2403) Port 1 */ |
| #define SEALEVEL_2403_2_PID 0x2423 /* SeaPORT+4 (2403) Port 2 */ |
| #define SEALEVEL_2403_3_PID 0x2433 /* SeaPORT+4 (2403) Port 3 */ |
| #define SEALEVEL_2403_4_PID 0x2443 /* SeaPORT+4 (2403) Port 4 */ |
| #define SEALEVEL_2801_1_PID 0X2811 /* SeaLINK+8/232 (2801) Port 1 */ |
| #define SEALEVEL_2801_2_PID 0X2821 /* SeaLINK+8/232 (2801) Port 2 */ |
| #define SEALEVEL_2801_3_PID 0X2831 /* SeaLINK+8/232 (2801) Port 3 */ |
| #define SEALEVEL_2801_4_PID 0X2841 /* SeaLINK+8/232 (2801) Port 4 */ |
| #define SEALEVEL_2801_5_PID 0X2851 /* SeaLINK+8/232 (2801) Port 5 */ |
| #define SEALEVEL_2801_6_PID 0X2861 /* SeaLINK+8/232 (2801) Port 6 */ |
| #define SEALEVEL_2801_7_PID 0X2871 /* SeaLINK+8/232 (2801) Port 7 */ |
| #define SEALEVEL_2801_8_PID 0X2881 /* SeaLINK+8/232 (2801) Port 8 */ |
| #define SEALEVEL_2802_1_PID 0X2812 /* SeaLINK+8/485 (2802) Port 1 */ |
| #define SEALEVEL_2802_2_PID 0X2822 /* SeaLINK+8/485 (2802) Port 2 */ |
| #define SEALEVEL_2802_3_PID 0X2832 /* SeaLINK+8/485 (2802) Port 3 */ |
| #define SEALEVEL_2802_4_PID 0X2842 /* SeaLINK+8/485 (2802) Port 4 */ |
| #define SEALEVEL_2802_5_PID 0X2852 /* SeaLINK+8/485 (2802) Port 5 */ |
| #define SEALEVEL_2802_6_PID 0X2862 /* SeaLINK+8/485 (2802) Port 6 */ |
| #define SEALEVEL_2802_7_PID 0X2872 /* SeaLINK+8/485 (2802) Port 7 */ |
| #define SEALEVEL_2802_8_PID 0X2882 /* SeaLINK+8/485 (2802) Port 8 */ |
| #define SEALEVEL_2803_1_PID 0X2813 /* SeaLINK+8 (2803) Port 1 */ |
| #define SEALEVEL_2803_2_PID 0X2823 /* SeaLINK+8 (2803) Port 2 */ |
| #define SEALEVEL_2803_3_PID 0X2833 /* SeaLINK+8 (2803) Port 3 */ |
| #define SEALEVEL_2803_4_PID 0X2843 /* SeaLINK+8 (2803) Port 4 */ |
| #define SEALEVEL_2803_5_PID 0X2853 /* SeaLINK+8 (2803) Port 5 */ |
| #define SEALEVEL_2803_6_PID 0X2863 /* SeaLINK+8 (2803) Port 6 */ |
| #define SEALEVEL_2803_7_PID 0X2873 /* SeaLINK+8 (2803) Port 7 */ |
| #define SEALEVEL_2803_8_PID 0X2883 /* SeaLINK+8 (2803) Port 8 */ |
| |
| /* |
| * The following are the values for two KOBIL chipcard terminals. |
| */ |
| #define KOBIL_VID 0x0d46 /* KOBIL Vendor ID */ |
| #define KOBIL_CONV_B1_PID 0x2020 /* KOBIL Konverter for B1 */ |
| #define KOBIL_CONV_KAAN_PID 0x2021 /* KOBIL_Konverter for KAAN */ |
| |
| /* |
| * Icom ID-1 digital transceiver |
| */ |
| |
| #define ICOM_ID1_VID 0x0C26 |
| #define ICOM_ID1_PID 0x0004 |
| |
| /* |
| * ASK.fr devices |
| */ |
| #define FTDI_ASK_RDR400_PID 0xC991 /* ASK RDR 400 series card reader */ |
| |
| /* |
| * DSS-20 Sync Station for Sony Ericsson P800 |
| */ |
| |
| #define FTDI_DSS20_PID 0xFC82 |
| |
| /* |
| * Home Electronics (www.home-electro.com) USB gadgets |
| */ |
| #define FTDI_HE_TIRA1_PID 0xFA78 /* Tira-1 IR transceiver */ |
| |
| /* USB-UIRT - An infrared receiver and transmitter using the 8U232AM chip */ |
| /* http://home.earthlink.net/~jrhees/USBUIRT/index.htm */ |
| #define FTDI_USB_UIRT_PID 0xF850 /* Product Id */ |
| |
| /* |
| * ELV USB devices submitted by Christian Abt of ELV (www.elv.de). |
| * All of these devices use FTDI's vendor ID (0x0403). |
| * |
| * The previously included PID for the UO 100 module was incorrect. |
| * In fact, that PID was for ELV's UR 100 USB-RS232 converter (0xFB58). |
| * |
| * Armin Laeuger originally sent the PID for the UM 100 module. |
| */ |
| #define FTDI_ELV_UR100_PID 0xFB58 /* USB-RS232-Umsetzer (UR 100) */ |
| #define FTDI_ELV_UM100_PID 0xFB5A /* USB-Modul UM 100 */ |
| #define FTDI_ELV_UO100_PID 0xFB5B /* USB-Modul UO 100 */ |
| #define FTDI_ELV_ALC8500_PID 0xF06E /* ALC 8500 Expert */ |
| /* Additional ELV PIDs that default to using the FTDI D2XX drivers on |
| * MS Windows, rather than the FTDI Virtual Com Port drivers. |
| * Maybe these will be easier to use with the libftdi/libusb user-space |
| * drivers, or possibly the Comedi drivers in some cases. */ |
| #define FTDI_ELV_CLI7000_PID 0xFB59 /* Computer-Light-Interface (CLI 7000) */ |
| #define FTDI_ELV_PPS7330_PID 0xFB5C /* Processor-Power-Supply (PPS 7330) */ |
| #define FTDI_ELV_TFM100_PID 0xFB5D /* Temperartur-Feuchte Messgeraet (TFM 100) */ |
| #define FTDI_ELV_UDF77_PID 0xFB5E /* USB DCF Funkurh (UDF 77) */ |
| #define FTDI_ELV_UIO88_PID 0xFB5F /* USB-I/O Interface (UIO 88) */ |
| #define FTDI_ELV_UAD8_PID 0xF068 /* USB-AD-Wandler (UAD 8) */ |
| #define FTDI_ELV_UDA7_PID 0xF069 /* USB-DA-Wandler (UDA 7) */ |
| #define FTDI_ELV_USI2_PID 0xF06A /* USB-Schrittmotoren-Interface (USI 2) */ |
| #define FTDI_ELV_T1100_PID 0xF06B /* Thermometer (T 1100) */ |
| #define FTDI_ELV_PCD200_PID 0xF06C /* PC-Datenlogger (PCD 200) */ |
| #define FTDI_ELV_ULA200_PID 0xF06D /* USB-LCD-Ansteuerung (ULA 200) */ |
| #define FTDI_ELV_FHZ1000PC_PID 0xF06F /* FHZ 1000 PC */ |
| #define FTDI_ELV_CSI8_PID 0xE0F0 /* Computer-Schalt-Interface (CSI 8) */ |
| #define FTDI_ELV_EM1000DL_PID 0xE0F1 /* PC-Datenlogger fuer Energiemonitor (EM 1000 DL) */ |
| #define FTDI_ELV_PCK100_PID 0xE0F2 /* PC-Kabeltester (PCK 100) */ |
| #define FTDI_ELV_RFP500_PID 0xE0F3 /* HF-Leistungsmesser (RFP 500) */ |
| #define FTDI_ELV_FS20SIG_PID 0xE0F4 /* Signalgeber (FS 20 SIG) */ |
| #define FTDI_ELV_WS300PC_PID 0xE0F6 /* PC-Wetterstation (WS 300 PC) */ |
| #define FTDI_ELV_FHZ1300PC_PID 0xE0E8 /* FHZ 1300 PC */ |
| #define FTDI_ELV_WS500_PID 0xE0E9 /* PC-Wetterstation (WS 500) */ |
| |
| /* |
| * Definitions for ID TECH (www.idt-net.com) devices |
| */ |
| #define IDTECH_VID 0x0ACD /* ID TECH Vendor ID */ |
| #define IDTECH_IDT1221U_PID 0x0300 /* IDT1221U USB to RS-232 adapter */ |
| |
| /* |
| * Definitions for Omnidirectional Control Technology, Inc. devices |
| */ |
| #define OCT_VID 0x0B39 /* OCT vendor ID */ |
| /* Note: OCT US101 is also rebadged as Dick Smith Electronics (NZ) XH6381 */ |
| /* Also rebadged as Dick Smith Electronics (Aus) XH6451 */ |
| /* Also rebadged as SIIG Inc. model US2308 hardware version 1 */ |
| #define OCT_US101_PID 0x0421 /* OCT US101 USB to RS-232 */ |
| |
| /* an infrared receiver for user access control with IR tags */ |
| #define FTDI_PIEGROUP_PID 0xF208 /* Product Id */ |
| |
| /* |
| * Definitions for Artemis astronomical USB based cameras |
| * Check it at http://www.artemisccd.co.uk/ |
| */ |
| #define FTDI_ARTEMIS_PID 0xDF28 /* All Artemis Cameras */ |
| |
| /* |
| * Definitions for ATIK Instruments astronomical USB based cameras |
| * Check it at http://www.atik-instruments.com/ |
| */ |
| #define FTDI_ATIK_ATK16_PID 0xDF30 /* ATIK ATK-16 Grayscale Camera */ |
| #define FTDI_ATIK_ATK16C_PID 0xDF32 /* ATIK ATK-16C Colour Camera */ |
| #define FTDI_ATIK_ATK16HR_PID 0xDF31 /* ATIK ATK-16HR Grayscale Camera */ |
| #define FTDI_ATIK_ATK16HRC_PID 0xDF33 /* ATIK ATK-16HRC Colour Camera */ |
| |
| /* |
| * Protego product ids |
| */ |
| #define PROTEGO_SPECIAL_1 0xFC70 /* special/unknown device */ |
| #define PROTEGO_R2X0 0xFC71 /* R200-USB TRNG unit (R210, R220, and R230) */ |
| #define PROTEGO_SPECIAL_3 0xFC72 /* special/unknown device */ |
| #define PROTEGO_SPECIAL_4 0xFC73 /* special/unknown device */ |
| |
| /* |
| * Gude Analog- und Digitalsysteme GmbH |
| */ |
| #define FTDI_GUDEADS_E808_PID 0xE808 |
| #define FTDI_GUDEADS_E809_PID 0xE809 |
| #define FTDI_GUDEADS_E80A_PID 0xE80A |
| #define FTDI_GUDEADS_E80B_PID 0xE80B |
| #define FTDI_GUDEADS_E80C_PID 0xE80C |
| #define FTDI_GUDEADS_E80D_PID 0xE80D |
| #define FTDI_GUDEADS_E80E_PID 0xE80E |
| #define FTDI_GUDEADS_E80F_PID 0xE80F |
| #define FTDI_GUDEADS_E888_PID 0xE888 /* Expert ISDN Control USB */ |
| #define FTDI_GUDEADS_E889_PID 0xE889 /* USB RS-232 OptoBridge */ |
| #define FTDI_GUDEADS_E88A_PID 0xE88A |
| #define FTDI_GUDEADS_E88B_PID 0xE88B |
| #define FTDI_GUDEADS_E88C_PID 0xE88C |
| #define FTDI_GUDEADS_E88D_PID 0xE88D |
| #define FTDI_GUDEADS_E88E_PID 0xE88E |
| #define FTDI_GUDEADS_E88F_PID 0xE88F |
| |
| /* |
| * Linx Technologies product ids |
| */ |
| #define LINX_SDMUSBQSS_PID 0xF448 /* Linx SDM-USB-QS-S */ |
| #define LINX_MASTERDEVEL2_PID 0xF449 /* Linx Master Development 2.0 */ |
| #define LINX_FUTURE_0_PID 0xF44A /* Linx future device */ |
| #define LINX_FUTURE_1_PID 0xF44B /* Linx future device */ |
| #define LINX_FUTURE_2_PID 0xF44C /* Linx future device */ |
| |
| /* CCS Inc. ICDU/ICDU40 product ID - the FT232BM is used in an in-circuit-debugger */ |
| /* unit for PIC16's/PIC18's */ |
| #define FTDI_CCSICDU20_0_PID 0xF9D0 |
| #define FTDI_CCSICDU40_1_PID 0xF9D1 |
| |
| /* Inside Accesso contactless reader (http://www.insidefr.com) */ |
| #define INSIDE_ACCESSO 0xFAD0 |
| |
| /* |
| * Intrepid Control Systems (http://www.intrepidcs.com/) ValueCAN and NeoVI |
| */ |
| #define INTREPID_VID 0x093C |
| #define INTREPID_VALUECAN_PID 0x0601 |
| #define INTREPID_NEOVI_PID 0x0701 |
| |
| /* |
| * Falcom Wireless Communications GmbH |
| */ |
| #define FALCOM_VID 0x0F94 /* Vendor Id */ |
| #define FALCOM_TWIST_PID 0x0001 /* Falcom Twist USB GPRS modem */ |
| #define FALCOM_SAMBA_PID 0x0005 /* Falcom Samba USB GPRS modem */ |
| |
| /* |
| * SUUNTO product ids |
| */ |
| #define FTDI_SUUNTO_SPORTS_PID 0xF680 /* Suunto Sports instrument */ |
| |
| /* |
| * Definitions for B&B Electronics products. |
| */ |
| #define BANDB_VID 0x0856 /* B&B Electronics Vendor ID */ |
| #define BANDB_USOTL4_PID 0xAC01 /* USOTL4 Isolated RS-485 Converter */ |
| #define BANDB_USTL4_PID 0xAC02 /* USTL4 RS-485 Converter */ |
| #define BANDB_USO9ML2_PID 0xAC03 /* USO9ML2 Isolated RS-232 Converter */ |
| |
| /* |
| * RM Michaelides CANview USB (http://www.rmcan.com) |
| * CAN fieldbus interface adapter, added by port GmbH www.port.de) |
| * Ian Abbott changed the macro names for consistency. |
| */ |
| #define FTDI_RM_CANVIEW_PID 0xfd60 /* Product Id */ |
| |
| /* |
| * EVER Eco Pro UPS (http://www.ever.com.pl/) |
| */ |
| |
| #define EVER_ECO_PRO_CDS 0xe520 /* RS-232 converter */ |
| |
| /* |
| * 4N-GALAXY.DE PIDs for CAN-USB, USB-RS232, USB-RS422, USB-RS485, |
| * USB-TTY activ, USB-TTY passiv. Some PIDs are used by several devices |
| * and I'm not entirely sure which are used by which. |
| */ |
| #define FTDI_4N_GALAXY_DE_0_PID 0x8372 |
| #define FTDI_4N_GALAXY_DE_1_PID 0xF3C0 |
| #define FTDI_4N_GALAXY_DE_2_PID 0xF3C1 |
| |
| /* |
| * Mobility Electronics products. |
| */ |
| #define MOBILITY_VID 0x1342 |
| #define MOBILITY_USB_SERIAL_PID 0x0202 /* EasiDock USB 200 serial */ |
| |
| /* |
| * microHAM product IDs (http://www.microham.com). |
| * Submitted by Justin Burket (KL1RL) <zorton@jtan.com> |
| * and Mike Studer (K6EEP) <k6eep@hamsoftware.org>. |
| * Ian Abbott <abbotti@mev.co.uk> added a few more from the driver INF file. |
| */ |
| #define FTDI_MHAM_KW_PID 0xEEE8 /* USB-KW interface */ |
| #define FTDI_MHAM_YS_PID 0xEEE9 /* USB-YS interface */ |
| #define FTDI_MHAM_Y6_PID 0xEEEA /* USB-Y6 interface */ |
| #define FTDI_MHAM_Y8_PID 0xEEEB /* USB-Y8 interface */ |
| #define FTDI_MHAM_IC_PID 0xEEEC /* USB-IC interface */ |
| #define FTDI_MHAM_DB9_PID 0xEEED /* USB-DB9 interface */ |
| #define FTDI_MHAM_RS232_PID 0xEEEE /* USB-RS232 interface */ |
| #define FTDI_MHAM_Y9_PID 0xEEEF /* USB-Y9 interface */ |
| |
| /* |
| * Active Robots product ids. |
| */ |
| #define FTDI_ACTIVE_ROBOTS_PID 0xE548 /* USB comms board */ |
| |
| /* |
| * Xsens Technologies BV products (http://www.xsens.com). |
| */ |
| #define XSENS_CONVERTER_0_PID 0xD388 |
| #define XSENS_CONVERTER_1_PID 0xD389 |
| #define XSENS_CONVERTER_2_PID 0xD38A |
| #define XSENS_CONVERTER_3_PID 0xD38B |
| #define XSENS_CONVERTER_4_PID 0xD38C |
| #define XSENS_CONVERTER_5_PID 0xD38D |
| #define XSENS_CONVERTER_6_PID 0xD38E |
| #define XSENS_CONVERTER_7_PID 0xD38F |
| |
| /* |
| * Teratronik product ids. |
| * Submitted by O. Wölfelschneider. |
| */ |
| #define FTDI_TERATRONIK_VCP_PID 0xEC88 /* Teratronik device (preferring VCP driver on windows) */ |
| #define FTDI_TERATRONIK_D2XX_PID 0xEC89 /* Teratronik device (preferring D2XX driver on windows) */ |
| |
| /* |
| * Evolution Robotics products (http://www.evolution.com/). |
| * Submitted by Shawn M. Lavelle. |
| */ |
| #define EVOLUTION_VID 0xDEEE /* Vendor ID */ |
| #define EVOLUTION_ER1_PID 0x0300 /* ER1 Control Module */ |
| |
| /* Pyramid Computer GmbH */ |
| #define FTDI_PYRAMID_PID 0xE6C8 /* Pyramid Appliance Display */ |
| |
| /* |
| * Posiflex inc retail equipment (http://www.posiflex.com.tw) |
| */ |
| #define POSIFLEX_VID 0x0d3a /* Vendor ID */ |
| #define POSIFLEX_PP7000_PID 0x0300 /* PP-7000II thermal printer */ |
| |
| /* |
| * Westrex International devices submitted by Cory Lee |
| */ |
| #define FTDI_WESTREX_MODEL_777_PID 0xDC00 /* Model 777 */ |
| #define FTDI_WESTREX_MODEL_8900F_PID 0xDC01 /* Model 8900F */ |
| |
| /* |
| * RR-CirKits LocoBuffer USB (http://www.rr-cirkits.com) |
| */ |
| #define FTDI_RRCIRKITS_LOCOBUFFER_PID 0xc7d0 /* LocoBuffer USB */ |
| |
| /* |
| * Eclo (http://www.eclo.pt/) product IDs. |
| * PID 0xEA90 submitted by Martin Grill. |
| */ |
| #define FTDI_ECLO_COM_1WIRE_PID 0xEA90 /* COM to 1-Wire USB adaptor */ |
| |
| /* |
| * Papouch products (http://www.papouch.com/) |
| * Submitted by Folkert van Heusden |
| */ |
| |
| #define PAPOUCH_VID 0x5050 /* Vendor ID */ |
| #define PAPOUCH_TMU_PID 0x0400 /* TMU USB Thermometer */ |
| |
| /* |
| * ACG Identification Technologies GmbH products (http://www.acg.de/). |
| * Submitted by anton -at- goto10 -dot- org. |
| */ |
| #define FTDI_ACG_HFDUAL_PID 0xDD20 /* HF Dual ISO Reader (RFID) */ |
| |
| /* |
| * Yost Engineering, Inc. products (www.yostengineering.com). |
| * PID 0xE050 submitted by Aaron Prose. |
| */ |
| #define FTDI_YEI_SERVOCENTER31_PID 0xE050 /* YEI ServoCenter3.1 USB */ |
| |
| /* Commands */ |
| #define FTDI_SIO_RESET 0 /* Reset the port */ |
| #define FTDI_SIO_MODEM_CTRL 1 /* Set the modem control register */ |
| #define FTDI_SIO_SET_FLOW_CTRL 2 /* Set flow control register */ |
| #define FTDI_SIO_SET_BAUD_RATE 3 /* Set baud rate */ |
| #define FTDI_SIO_SET_DATA 4 /* Set the data characteristics of the port */ |
| #define FTDI_SIO_GET_MODEM_STATUS 5 /* Retrieve current value of modern status register */ |
| #define FTDI_SIO_SET_EVENT_CHAR 6 /* Set the event character */ |
| #define FTDI_SIO_SET_ERROR_CHAR 7 /* Set the error character */ |
| #define FTDI_SIO_SET_LATENCY_TIMER 9 /* Set the latency timer */ |
| #define FTDI_SIO_GET_LATENCY_TIMER 10 /* Get the latency timer */ |
| |
| |
| /* |
| * BmRequestType: 1100 0000b |
| * bRequest: FTDI_E2_READ |
| * wValue: 0 |
| * wIndex: Address of word to read |
| * wLength: 2 |
| * Data: Will return a word of data from E2Address |
| * |
| */ |
| |
| /* Port Identifier Table */ |
| #define PIT_DEFAULT 0 /* SIOA */ |
| #define PIT_SIOA 1 /* SIOA */ |
| /* The device this driver is tested with one has only one port */ |
| #define PIT_SIOB 2 /* SIOB */ |
| #define PIT_PARALLEL 3 /* Parallel */ |
| |
| /* FTDI_SIO_RESET */ |
| #define FTDI_SIO_RESET_REQUEST FTDI_SIO_RESET |
| #define FTDI_SIO_RESET_REQUEST_TYPE 0x40 |
| #define FTDI_SIO_RESET_SIO 0 |
| #define FTDI_SIO_RESET_PURGE_RX 1 |
| #define FTDI_SIO_RESET_PURGE_TX 2 |
| |
| /* |
| * BmRequestType: 0100 0000B |
| * bRequest: FTDI_SIO_RESET |
| * wValue: Control Value |
| * 0 = Reset SIO |
| * 1 = Purge RX buffer |
| * 2 = Purge TX buffer |
| * wIndex: Port |
| * wLength: 0 |
| * Data: None |
| * |
| * The Reset SIO command has this effect: |
| * |
| * Sets flow control set to 'none' |
| * Event char = $0D |
| * Event trigger = disabled |
| * Purge RX buffer |
| * Purge TX buffer |
| * Clear DTR |
| * Clear RTS |
| * baud and data format not reset |
| * |
| * The Purge RX and TX buffer commands affect nothing except the buffers |
| * |
| */ |
| |
| /* FTDI_SIO_SET_BAUDRATE */ |
| #define FTDI_SIO_SET_BAUDRATE_REQUEST_TYPE 0x40 |
| #define FTDI_SIO_SET_BAUDRATE_REQUEST 3 |
| |
| /* |
| * BmRequestType: 0100 0000B |
| * bRequest: FTDI_SIO_SET_BAUDRATE |
| * wValue: BaudDivisor value - see below |
| * wIndex: Port |
| * wLength: 0 |
| * Data: None |
| * The BaudDivisor values are calculated as follows: |
| * - BaseClock is either 12000000 or 48000000 depending on the device. FIXME: I wish |
| * I knew how to detect old chips to select proper base clock! |
| * - BaudDivisor is a fixed point number encoded in a funny way. |
| * (--WRONG WAY OF THINKING--) |
| * BaudDivisor is a fixed point number encoded with following bit weighs: |
| * (-2)(-1)(13..0). It is a radical with a denominator of 4, so values |
| * end with 0.0 (00...), 0.25 (10...), 0.5 (01...), and 0.75 (11...). |
| * (--THE REALITY--) |
| * The both-bits-set has quite different meaning from 0.75 - the chip designers |
| * have decided it to mean 0.125 instead of 0.75. |
| * This info looked up in FTDI application note "FT8U232 DEVICES \ Data Rates |
| * and Flow Control Consideration for USB to RS232". |
| * - BaudDivisor = (BaseClock / 16) / BaudRate, where the (=) operation should |
| * automagically re-encode the resulting value to take fractions into consideration. |
| * As all values are integers, some bit twiddling is in order: |
| * BaudDivisor = (BaseClock / 16 / BaudRate) | |
| * (((BaseClock / 2 / BaudRate) & 4) ? 0x4000 // 0.5 |
| * : ((BaseClock / 2 / BaudRate) & 2) ? 0x8000 // 0.25 |
| * : ((BaseClock / 2 / BaudRate) & 1) ? 0xc000 // 0.125 |
| * : 0) |
| * |
| * For the FT232BM, a 17th divisor bit was introduced to encode the multiples |
| * of 0.125 missing from the FT8U232AM. Bits 16 to 14 are coded as follows |
| * (the first four codes are the same as for the FT8U232AM, where bit 16 is |
| * always 0): |
| * 000 - add .000 to divisor |
| * 001 - add .500 to divisor |
| * 010 - add .250 to divisor |
| * 011 - add .125 to divisor |
| * 100 - add .375 to divisor |
| * 101 - add .625 to divisor |
| * 110 - add .750 to divisor |
| * 111 - add .875 to divisor |
| * Bits 15 to 0 of the 17-bit divisor are placed in the urb value. Bit 16 is |
| * placed in bit 0 of the urb index. |
| * |
| * Note that there are a couple of special cases to support the highest baud |
| * rates. If the calculated divisor value is 1, this needs to be replaced with |
| * 0. Additionally for the FT232BM, if the calculated divisor value is 0x4001 |
| * (1.5), this needs to be replaced with 0x0001 (1) (but this divisor value is |
| * not supported by the FT8U232AM). |
| */ |
| |
| typedef enum { |
| SIO = 1, |
| FT8U232AM = 2, |
| FT232BM = 3, |
| FT2232C = 4, |
| } ftdi_chip_type_t; |
| |
| typedef enum { |
| ftdi_sio_b300 = 0, |
| ftdi_sio_b600 = 1, |
| ftdi_sio_b1200 = 2, |
| ftdi_sio_b2400 = 3, |
| ftdi_sio_b4800 = 4, |
| ftdi_sio_b9600 = 5, |
| ftdi_sio_b19200 = 6, |
| ftdi_sio_b38400 = 7, |
| ftdi_sio_b57600 = 8, |
| ftdi_sio_b115200 = 9 |
| } FTDI_SIO_baudrate_t ; |
| |
| /* |
| * The ftdi_8U232AM_xxMHz_byyy constants have been removed. The encoded divisor values |
| * are calculated internally. |
| */ |
| |
| #define FTDI_SIO_SET_DATA_REQUEST FTDI_SIO_SET_DATA |
| #define FTDI_SIO_SET_DATA_REQUEST_TYPE 0x40 |
| #define FTDI_SIO_SET_DATA_PARITY_NONE (0x0 << 8 ) |
| #define FTDI_SIO_SET_DATA_PARITY_ODD (0x1 << 8 ) |
| #define FTDI_SIO_SET_DATA_PARITY_EVEN (0x2 << 8 ) |
| #define FTDI_SIO_SET_DATA_PARITY_MARK (0x3 << 8 ) |
| #define FTDI_SIO_SET_DATA_PARITY_SPACE (0x4 << 8 ) |
| #define FTDI_SIO_SET_DATA_STOP_BITS_1 (0x0 << 11 ) |
| #define FTDI_SIO_SET_DATA_STOP_BITS_15 (0x1 << 11 ) |
| #define FTDI_SIO_SET_DATA_STOP_BITS_2 (0x2 << 11 ) |
| #define FTDI_SIO_SET_BREAK (0x1 << 14) |
| /* FTDI_SIO_SET_DATA */ |
| |
| /* |
| * BmRequestType: 0100 0000B |
| * bRequest: FTDI_SIO_SET_DATA |
| * wValue: Data characteristics (see below) |
| * wIndex: Port |
| * wLength: 0 |
| * Data: No |
| * |
| * Data characteristics |
| * |
| * B0..7 Number of data bits |
| * B8..10 Parity |
| * 0 = None |
| * 1 = Odd |
| * 2 = Even |
| * 3 = Mark |
| * 4 = Space |
| * B11..13 Stop Bits |
| * 0 = 1 |
| * 1 = 1.5 |
| * 2 = 2 |
| * B14 |
| * 1 = TX ON (break) |
| * 0 = TX OFF (normal state) |
| * B15 Reserved |
| * |
| */ |
| |
| |
| |
| /* FTDI_SIO_MODEM_CTRL */ |
| #define FTDI_SIO_SET_MODEM_CTRL_REQUEST_TYPE 0x40 |
| #define FTDI_SIO_SET_MODEM_CTRL_REQUEST FTDI_SIO_MODEM_CTRL |
| |
| /* |
| * BmRequestType: 0100 0000B |
| * bRequest: FTDI_SIO_MODEM_CTRL |
| * wValue: ControlValue (see below) |
| * wIndex: Port |
| * wLength: 0 |
| * Data: None |
| * |
| * NOTE: If the device is in RTS/CTS flow control, the RTS set by this |
| * command will be IGNORED without an error being returned |
| * Also - you can not set DTR and RTS with one control message |
| */ |
| |
| #define FTDI_SIO_SET_DTR_MASK 0x1 |
| #define FTDI_SIO_SET_DTR_HIGH ( 1 | ( FTDI_SIO_SET_DTR_MASK << 8)) |
| #define FTDI_SIO_SET_DTR_LOW ( 0 | ( FTDI_SIO_SET_DTR_MASK << 8)) |
| #define FTDI_SIO_SET_RTS_MASK 0x2 |
| #define FTDI_SIO_SET_RTS_HIGH ( 2 | ( FTDI_SIO_SET_RTS_MASK << 8 )) |
| #define FTDI_SIO_SET_RTS_LOW ( 0 | ( FTDI_SIO_SET_RTS_MASK << 8 )) |
| |
| /* |
| * ControlValue |
| * B0 DTR state |
| * 0 = reset |
| * 1 = set |
| * B1 RTS state |
| * 0 = reset |
| * 1 = set |
| * B2..7 Reserved |
| * B8 DTR state enable |
| * 0 = ignore |
| * 1 = use DTR state |
| * B9 RTS state enable |
| * 0 = ignore |
| * 1 = use RTS state |
| * B10..15 Reserved |
| */ |
| |
| /* FTDI_SIO_SET_FLOW_CTRL */ |
| #define FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE 0x40 |
| #define FTDI_SIO_SET_FLOW_CTRL_REQUEST FTDI_SIO_SET_FLOW_CTRL |
| #define FTDI_SIO_DISABLE_FLOW_CTRL 0x0 |
| #define FTDI_SIO_RTS_CTS_HS (0x1 << 8) |
| #define FTDI_SIO_DTR_DSR_HS (0x2 << 8) |
| #define FTDI_SIO_XON_XOFF_HS (0x4 << 8) |
| /* |
| * BmRequestType: 0100 0000b |
| * bRequest: FTDI_SIO_SET_FLOW_CTRL |
| * wValue: Xoff/Xon |
| * wIndex: Protocol/Port - hIndex is protocl / lIndex is port |
| * wLength: 0 |
| * Data: None |
| * |
| * hIndex protocol is: |
| * B0 Output handshaking using RTS/CTS |
| * 0 = disabled |
| * 1 = enabled |
| * B1 Output handshaking using DTR/DSR |
| * 0 = disabled |
| * 1 = enabled |
| * B2 Xon/Xoff handshaking |
| * 0 = disabled |
| * 1 = enabled |
| * |
| * A value of zero in the hIndex field disables handshaking |
| * |
| * If Xon/Xoff handshaking is specified, the hValue field should contain the XOFF character |
| * and the lValue field contains the XON character. |
| */ |
| |
| /* |
| * FTDI_SIO_GET_LATENCY_TIMER |
| * |
| * Set the timeout interval. The FTDI collects data from the slave |
| * device, transmitting it to the host when either A) 62 bytes are |
| * received, or B) the timeout interval has elapsed and the buffer |
| * contains at least 1 byte. Setting this value to a small number |
| * can dramatically improve performance for applications which send |
| * small packets, since the default value is 16ms. |
| */ |
| #define FTDI_SIO_GET_LATENCY_TIMER_REQUEST FTDI_SIO_GET_LATENCY_TIMER |
| #define FTDI_SIO_GET_LATENCY_TIMER_REQUEST_TYPE 0xC0 |
| |
| /* |
| * BmRequestType: 1100 0000b |
| * bRequest: FTDI_SIO_GET_LATENCY_TIMER |
| * wValue: 0 |
| * wIndex: Port |
| * wLength: 0 |
| * Data: latency (on return) |
| */ |
| |
| /* |
| * FTDI_SIO_SET_LATENCY_TIMER |
| * |
| * Set the timeout interval. The FTDI collects data from the slave |
| * device, transmitting it to the host when either A) 62 bytes are |
| * received, or B) the timeout interval has elapsed and the buffer |
| * contains at least 1 byte. Setting this value to a small number |
| * can dramatically improve performance for applications which send |
| * small packets, since the default value is 16ms. |
| */ |
| #define FTDI_SIO_SET_LATENCY_TIMER_REQUEST FTDI_SIO_SET_LATENCY_TIMER |
| #define FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE 0x40 |
| |
| /* |
| * BmRequestType: 0100 0000b |
| * bRequest: FTDI_SIO_SET_LATENCY_TIMER |
| * wValue: Latency (milliseconds) |
| * wIndex: Port |
| * wLength: 0 |
| * Data: None |
| * |
| * wValue: |
| * B0..7 Latency timer |
| * B8..15 0 |
| * |
| */ |
| |
| /* |
| * FTDI_SIO_SET_EVENT_CHAR |
| * |
| * Set the special event character for the specified communications port. |
| * If the device sees this character it will immediately return the |
| * data read so far - rather than wait 40ms or until 62 bytes are read |
| * which is what normally happens. |
| */ |
| |
| |
| #define FTDI_SIO_SET_EVENT_CHAR_REQUEST FTDI_SIO_SET_EVENT_CHAR |
| #define FTDI_SIO_SET_EVENT_CHAR_REQUEST_TYPE 0x40 |
| |
| |
| /* |
| * BmRequestType: 0100 0000b |
| * bRequest: FTDI_SIO_SET_EVENT_CHAR |
| * wValue: EventChar |
| * wIndex: Port |
| * wLength: 0 |
| * Data: None |
| * |
| * wValue: |
| * B0..7 Event Character |
| * B8 Event Character Processing |
| * 0 = disabled |
| * 1 = enabled |
| * B9..15 Reserved |
| * |
| */ |
| |
| /* FTDI_SIO_SET_ERROR_CHAR */ |
| |
| /* Set the parity error replacement character for the specified communications port */ |
| |
| /* |
| * BmRequestType: 0100 0000b |
| * bRequest: FTDI_SIO_SET_EVENT_CHAR |
| * wValue: Error Char |
| * wIndex: Port |
| * wLength: 0 |
| * Data: None |
| * |
| *Error Char |
| * B0..7 Error Character |
| * B8 Error Character Processing |
| * 0 = disabled |
| * 1 = enabled |
| * B9..15 Reserved |
| * |
| */ |
| |
| /* FTDI_SIO_GET_MODEM_STATUS */ |
| /* Retrieve the current value of the modem status register */ |
| |
| #define FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE 0xc0 |
| #define FTDI_SIO_GET_MODEM_STATUS_REQUEST FTDI_SIO_GET_MODEM_STATUS |
| #define FTDI_SIO_CTS_MASK 0x10 |
| #define FTDI_SIO_DSR_MASK 0x20 |
| #define FTDI_SIO_RI_MASK 0x40 |
| #define FTDI_SIO_RLSD_MASK 0x80 |
| /* |
| * BmRequestType: 1100 0000b |
| * bRequest: FTDI_SIO_GET_MODEM_STATUS |
| * wValue: zero |
| * wIndex: Port |
| * wLength: 1 |
| * Data: Status |
| * |
| * One byte of data is returned |
| * B0..3 0 |
| * B4 CTS |
| * 0 = inactive |
| * 1 = active |
| * B5 DSR |
| * 0 = inactive |
| * 1 = active |
| * B6 Ring Indicator (RI) |
| * 0 = inactive |
| * 1 = active |
| * B7 Receive Line Signal Detect (RLSD) |
| * 0 = inactive |
| * 1 = active |
| */ |
| |
| |
| |
| /* Descriptors returned by the device |
| * |
| * Device Descriptor |
| * |
| * Offset Field Size Value Description |
| * 0 bLength 1 0x12 Size of descriptor in bytes |
| * 1 bDescriptorType 1 0x01 DEVICE Descriptor Type |
| * 2 bcdUSB 2 0x0110 USB Spec Release Number |
| * 4 bDeviceClass 1 0x00 Class Code |
| * 5 bDeviceSubClass 1 0x00 SubClass Code |
| * 6 bDeviceProtocol 1 0x00 Protocol Code |
| * 7 bMaxPacketSize0 1 0x08 Maximum packet size for endpoint 0 |
| * 8 idVendor 2 0x0403 Vendor ID |
| * 10 idProduct 2 0x8372 Product ID (FTDI_SIO_PID) |
| * 12 bcdDevice 2 0x0001 Device release number |
| * 14 iManufacturer 1 0x01 Index of man. string desc |
| * 15 iProduct 1 0x02 Index of prod string desc |
| * 16 iSerialNumber 1 0x02 Index of serial nmr string desc |
| * 17 bNumConfigurations 1 0x01 Number of possible configurations |
| * |
| * Configuration Descriptor |
| * |
| * Offset Field Size Value |
| * 0 bLength 1 0x09 Size of descriptor in bytes |
| * 1 bDescriptorType 1 0x02 CONFIGURATION Descriptor Type |
| * 2 wTotalLength 2 0x0020 Total length of data |
| * 4 bNumInterfaces 1 0x01 Number of interfaces supported |
| * 5 bConfigurationValue 1 0x01 Argument for SetCOnfiguration() req |
| * 6 iConfiguration 1 0x02 Index of config string descriptor |
| * 7 bmAttributes 1 0x20 Config characteristics Remote Wakeup |
| * 8 MaxPower 1 0x1E Max power consumption |
| * |
| * Interface Descriptor |
| * |
| * Offset Field Size Value |
| * 0 bLength 1 0x09 Size of descriptor in bytes |
| * 1 bDescriptorType 1 0x04 INTERFACE Descriptor Type |
| * 2 bInterfaceNumber 1 0x00 Number of interface |
| * 3 bAlternateSetting 1 0x00 Value used to select alternate |
| * 4 bNumEndpoints 1 0x02 Number of endpoints |
| * 5 bInterfaceClass 1 0xFF Class Code |
| * 6 bInterfaceSubClass 1 0xFF Subclass Code |
| * 7 bInterfaceProtocol 1 0xFF Protocol Code |
| * 8 iInterface 1 0x02 Index of interface string description |
| * |
| * IN Endpoint Descriptor |
| * |
| * Offset Field Size Value |
| * 0 bLength 1 0x07 Size of descriptor in bytes |
| * 1 bDescriptorType 1 0x05 ENDPOINT descriptor type |
| * 2 bEndpointAddress 1 0x82 Address of endpoint |
| * 3 bmAttributes 1 0x02 Endpoint attributes - Bulk |
| * 4 bNumEndpoints 2 0x0040 maximum packet size |
| * 5 bInterval 1 0x00 Interval for polling endpoint |
| * |
| * OUT Endpoint Descriptor |
| * |
| * Offset Field Size Value |
| * 0 bLength 1 0x07 Size of descriptor in bytes |
| * 1 bDescriptorType 1 0x05 ENDPOINT descriptor type |
| * 2 bEndpointAddress 1 0x02 Address of endpoint |
| * 3 bmAttributes 1 0x02 Endpoint attributes - Bulk |
| * 4 bNumEndpoints 2 0x0040 maximum packet size |
| * 5 bInterval 1 0x00 Interval for polling endpoint |
| * |
| * DATA FORMAT |
| * |
| * IN Endpoint |
| * |
| * The device reserves the first two bytes of data on this endpoint to contain the current |
| * values of the modem and line status registers. In the absence of data, the device |
| * generates a message consisting of these two status bytes every 40 ms |
| * |
| * Byte 0: Modem Status |
| * |
| * Offset Description |
| * B0 Reserved - must be 1 |
| * B1 Reserved - must be 0 |
| * B2 Reserved - must be 0 |
| * B3 Reserved - must be 0 |
| * B4 Clear to Send (CTS) |
| * B5 Data Set Ready (DSR) |
| * B6 Ring Indicator (RI) |
| * B7 Receive Line Signal Detect (RLSD) |
| * |
| * Byte 1: Line Status |
| * |
| * Offset Description |
| * B0 Data Ready (DR) |
| * B1 Overrun Error (OE) |
| * B2 Parity Error (PE) |
| * B3 Framing Error (FE) |
| * B4 Break Interrupt (BI) |
| * B5 Transmitter Holding Register (THRE) |
| * B6 Transmitter Empty (TEMT) |
| * B7 Error in RCVR FIFO |
| * |
| */ |
| #define FTDI_RS0_CTS (1 << 4) |
| #define FTDI_RS0_DSR (1 << 5) |
| #define FTDI_RS0_RI (1 << 6) |
| #define FTDI_RS0_RLSD (1 << 7) |
| |
| #define FTDI_RS_DR 1 |
| #define FTDI_RS_OE (1<<1) |
| #define FTDI_RS_PE (1<<2) |
| #define FTDI_RS_FE (1<<3) |
| #define FTDI_RS_BI (1<<4) |
| #define FTDI_RS_THRE (1<<5) |
| #define FTDI_RS_TEMT (1<<6) |
| #define FTDI_RS_FIFO (1<<7) |
| |
| /* |
| * OUT Endpoint |
| * |
| * This device reserves the first bytes of data on this endpoint contain the length |
| * and port identifier of the message. For the FTDI USB Serial converter the port |
| * identifier is always 1. |
| * |
| * Byte 0: Line Status |
| * |
| * Offset Description |
| * B0 Reserved - must be 1 |
| * B1 Reserved - must be 0 |
| * B2..7 Length of message - (not including Byte 0) |
| * |
| */ |
| |