| /* Copyright (c) 2009-2013, Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/device.h> |
| #include <linux/platform_device.h> |
| #include <linux/clk.h> |
| #include <linux/slab.h> |
| #include <linux/interrupt.h> |
| #include <linux/err.h> |
| #include <linux/delay.h> |
| #include <linux/io.h> |
| #include <linux/ioport.h> |
| #include <linux/uaccess.h> |
| #include <linux/debugfs.h> |
| #include <linux/seq_file.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/of.h> |
| #include <linux/dma-mapping.h> |
| |
| #include <linux/usb.h> |
| #include <linux/usb/otg.h> |
| #include <linux/usb/ulpi.h> |
| #include <linux/usb/gadget.h> |
| #include <linux/usb/hcd.h> |
| #include <linux/usb/quirks.h> |
| #include <linux/usb/msm_hsusb.h> |
| #include <linux/usb/msm_hsusb_hw.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/mfd/pm8xxx/pm8921-charger.h> |
| #include <linux/mfd/pm8xxx/misc.h> |
| #include <linux/mhl_8334.h> |
| |
| #include <mach/scm.h> |
| #include <mach/clk.h> |
| #include <mach/mpm.h> |
| #include <mach/msm_xo.h> |
| #include <mach/msm_bus.h> |
| #include <mach/rpm-regulator.h> |
| |
| #define MSM_USB_BASE (motg->regs) |
| #define DRIVER_NAME "msm_otg" |
| |
| #define ID_TIMER_FREQ (jiffies + msecs_to_jiffies(500)) |
| #define CHG_RECHECK_DELAY (jiffies + msecs_to_jiffies(2000)) |
| #define ULPI_IO_TIMEOUT_USEC (10 * 1000) |
| #define USB_PHY_3P3_VOL_MIN 3050000 /* uV */ |
| #define USB_PHY_3P3_VOL_MAX 3300000 /* uV */ |
| #define USB_PHY_3P3_HPM_LOAD 50000 /* uA */ |
| #define USB_PHY_3P3_LPM_LOAD 4000 /* uA */ |
| |
| #define USB_PHY_1P8_VOL_MIN 1800000 /* uV */ |
| #define USB_PHY_1P8_VOL_MAX 1800000 /* uV */ |
| #define USB_PHY_1P8_HPM_LOAD 50000 /* uA */ |
| #define USB_PHY_1P8_LPM_LOAD 4000 /* uA */ |
| |
| #define USB_PHY_VDD_DIG_VOL_NONE 0 /*uV */ |
| #define USB_PHY_VDD_DIG_VOL_MIN 1045000 /* uV */ |
| #define USB_PHY_VDD_DIG_VOL_MAX 1320000 /* uV */ |
| |
| #define USB_SUSPEND_DELAY_TIME (500 * HZ/1000) /* 500 msec */ |
| |
| enum msm_otg_phy_reg_mode { |
| USB_PHY_REG_OFF, |
| USB_PHY_REG_ON, |
| USB_PHY_REG_LPM_ON, |
| USB_PHY_REG_LPM_OFF, |
| }; |
| |
| static char *override_phy_init; |
| module_param(override_phy_init, charp, S_IRUGO|S_IWUSR); |
| MODULE_PARM_DESC(override_phy_init, |
| "Override HSUSB PHY Init Settings"); |
| |
| unsigned int lpm_disconnect_thresh = 1000; |
| module_param(lpm_disconnect_thresh , uint, S_IRUGO | S_IWUSR); |
| MODULE_PARM_DESC(lpm_disconnect_thresh, |
| "Delay before entering LPM on USB disconnect"); |
| |
| static DECLARE_COMPLETION(pmic_vbus_init); |
| static struct msm_otg *the_msm_otg; |
| static bool debug_aca_enabled; |
| static bool debug_bus_voting_enabled; |
| static bool mhl_det_in_progress; |
| |
| static struct regulator *hsusb_3p3; |
| static struct regulator *hsusb_1p8; |
| static struct regulator *hsusb_vdd; |
| static struct regulator *vbus_otg; |
| static struct regulator *mhl_usb_hs_switch; |
| static struct power_supply *psy; |
| |
| static bool aca_id_turned_on; |
| static bool legacy_power_supply; |
| static inline bool aca_enabled(void) |
| { |
| #ifdef CONFIG_USB_MSM_ACA |
| return true; |
| #else |
| return debug_aca_enabled; |
| #endif |
| } |
| |
| static int vdd_val[VDD_TYPE_MAX][VDD_VAL_MAX] = { |
| { /* VDD_CX CORNER Voting */ |
| [VDD_NONE] = RPM_VREG_CORNER_NONE, |
| [VDD_MIN] = RPM_VREG_CORNER_NOMINAL, |
| [VDD_MAX] = RPM_VREG_CORNER_HIGH, |
| }, |
| { /* VDD_CX Voltage Voting */ |
| [VDD_NONE] = USB_PHY_VDD_DIG_VOL_NONE, |
| [VDD_MIN] = USB_PHY_VDD_DIG_VOL_MIN, |
| [VDD_MAX] = USB_PHY_VDD_DIG_VOL_MAX, |
| }, |
| }; |
| |
| static int msm_hsusb_ldo_init(struct msm_otg *motg, int init) |
| { |
| int rc = 0; |
| |
| if (init) { |
| hsusb_3p3 = devm_regulator_get(motg->phy.dev, "HSUSB_3p3"); |
| if (IS_ERR(hsusb_3p3)) { |
| dev_err(motg->phy.dev, "unable to get hsusb 3p3\n"); |
| return PTR_ERR(hsusb_3p3); |
| } |
| |
| rc = regulator_set_voltage(hsusb_3p3, USB_PHY_3P3_VOL_MIN, |
| USB_PHY_3P3_VOL_MAX); |
| if (rc) { |
| dev_err(motg->phy.dev, "unable to set voltage level for" |
| "hsusb 3p3\n"); |
| return rc; |
| } |
| hsusb_1p8 = devm_regulator_get(motg->phy.dev, "HSUSB_1p8"); |
| if (IS_ERR(hsusb_1p8)) { |
| dev_err(motg->phy.dev, "unable to get hsusb 1p8\n"); |
| rc = PTR_ERR(hsusb_1p8); |
| goto put_3p3_lpm; |
| } |
| rc = regulator_set_voltage(hsusb_1p8, USB_PHY_1P8_VOL_MIN, |
| USB_PHY_1P8_VOL_MAX); |
| if (rc) { |
| dev_err(motg->phy.dev, "unable to set voltage level " |
| "for hsusb 1p8\n"); |
| goto put_1p8; |
| } |
| |
| return 0; |
| } |
| |
| put_1p8: |
| regulator_set_voltage(hsusb_1p8, 0, USB_PHY_1P8_VOL_MAX); |
| put_3p3_lpm: |
| regulator_set_voltage(hsusb_3p3, 0, USB_PHY_3P3_VOL_MAX); |
| return rc; |
| } |
| |
| static int msm_hsusb_config_vddcx(int high) |
| { |
| struct msm_otg *motg = the_msm_otg; |
| enum usb_vdd_type vdd_type = motg->vdd_type; |
| int max_vol = vdd_val[vdd_type][VDD_MAX]; |
| int min_vol; |
| int ret; |
| |
| min_vol = vdd_val[vdd_type][!!high]; |
| ret = regulator_set_voltage(hsusb_vdd, min_vol, max_vol); |
| if (ret) { |
| pr_err("%s: unable to set the voltage for regulator " |
| "HSUSB_VDDCX\n", __func__); |
| return ret; |
| } |
| |
| pr_debug("%s: min_vol:%d max_vol:%d\n", __func__, min_vol, max_vol); |
| |
| return ret; |
| } |
| |
| static int msm_hsusb_ldo_enable(struct msm_otg *motg, |
| enum msm_otg_phy_reg_mode mode) |
| { |
| int ret = 0; |
| |
| if (IS_ERR(hsusb_1p8)) { |
| pr_err("%s: HSUSB_1p8 is not initialized\n", __func__); |
| return -ENODEV; |
| } |
| |
| if (IS_ERR(hsusb_3p3)) { |
| pr_err("%s: HSUSB_3p3 is not initialized\n", __func__); |
| return -ENODEV; |
| } |
| |
| switch (mode) { |
| case USB_PHY_REG_ON: |
| ret = regulator_set_optimum_mode(hsusb_1p8, |
| USB_PHY_1P8_HPM_LOAD); |
| if (ret < 0) { |
| pr_err("%s: Unable to set HPM of the regulator " |
| "HSUSB_1p8\n", __func__); |
| return ret; |
| } |
| |
| ret = regulator_enable(hsusb_1p8); |
| if (ret) { |
| dev_err(motg->phy.dev, "%s: unable to enable the hsusb 1p8\n", |
| __func__); |
| regulator_set_optimum_mode(hsusb_1p8, 0); |
| return ret; |
| } |
| |
| ret = regulator_set_optimum_mode(hsusb_3p3, |
| USB_PHY_3P3_HPM_LOAD); |
| if (ret < 0) { |
| pr_err("%s: Unable to set HPM of the regulator " |
| "HSUSB_3p3\n", __func__); |
| regulator_set_optimum_mode(hsusb_1p8, 0); |
| regulator_disable(hsusb_1p8); |
| return ret; |
| } |
| |
| ret = regulator_enable(hsusb_3p3); |
| if (ret) { |
| dev_err(motg->phy.dev, "%s: unable to enable the hsusb 3p3\n", |
| __func__); |
| regulator_set_optimum_mode(hsusb_3p3, 0); |
| regulator_set_optimum_mode(hsusb_1p8, 0); |
| regulator_disable(hsusb_1p8); |
| return ret; |
| } |
| |
| break; |
| |
| case USB_PHY_REG_OFF: |
| ret = regulator_disable(hsusb_1p8); |
| if (ret) { |
| dev_err(motg->phy.dev, "%s: unable to disable the hsusb 1p8\n", |
| __func__); |
| return ret; |
| } |
| |
| ret = regulator_set_optimum_mode(hsusb_1p8, 0); |
| if (ret < 0) |
| pr_err("%s: Unable to set LPM of the regulator " |
| "HSUSB_1p8\n", __func__); |
| |
| ret = regulator_disable(hsusb_3p3); |
| if (ret) { |
| dev_err(motg->phy.dev, "%s: unable to disable the hsusb 3p3\n", |
| __func__); |
| return ret; |
| } |
| ret = regulator_set_optimum_mode(hsusb_3p3, 0); |
| if (ret < 0) |
| pr_err("%s: Unable to set LPM of the regulator " |
| "HSUSB_3p3\n", __func__); |
| |
| break; |
| |
| case USB_PHY_REG_LPM_ON: |
| ret = regulator_set_optimum_mode(hsusb_1p8, |
| USB_PHY_1P8_LPM_LOAD); |
| if (ret < 0) { |
| pr_err("%s: Unable to set LPM of the regulator: HSUSB_1p8\n", |
| __func__); |
| return ret; |
| } |
| |
| ret = regulator_set_optimum_mode(hsusb_3p3, |
| USB_PHY_3P3_LPM_LOAD); |
| if (ret < 0) { |
| pr_err("%s: Unable to set LPM of the regulator: HSUSB_3p3\n", |
| __func__); |
| regulator_set_optimum_mode(hsusb_1p8, USB_PHY_REG_ON); |
| return ret; |
| } |
| |
| break; |
| |
| case USB_PHY_REG_LPM_OFF: |
| ret = regulator_set_optimum_mode(hsusb_1p8, |
| USB_PHY_1P8_HPM_LOAD); |
| if (ret < 0) { |
| pr_err("%s: Unable to set HPM of the regulator: HSUSB_1p8\n", |
| __func__); |
| return ret; |
| } |
| |
| ret = regulator_set_optimum_mode(hsusb_3p3, |
| USB_PHY_3P3_HPM_LOAD); |
| if (ret < 0) { |
| pr_err("%s: Unable to set HPM of the regulator: HSUSB_3p3\n", |
| __func__); |
| regulator_set_optimum_mode(hsusb_1p8, USB_PHY_REG_ON); |
| return ret; |
| } |
| |
| break; |
| |
| default: |
| pr_err("%s: Unsupported mode (%d).", __func__, mode); |
| return -ENOTSUPP; |
| } |
| |
| pr_debug("%s: USB reg mode (%d) (OFF/HPM/LPM)\n", __func__, mode); |
| return ret < 0 ? ret : 0; |
| } |
| |
| static void msm_hsusb_mhl_switch_enable(struct msm_otg *motg, bool on) |
| { |
| struct msm_otg_platform_data *pdata = motg->pdata; |
| |
| if (!pdata->mhl_enable) |
| return; |
| |
| if (!mhl_usb_hs_switch) { |
| pr_err("%s: mhl_usb_hs_switch is NULL.\n", __func__); |
| return; |
| } |
| |
| if (on) { |
| if (regulator_enable(mhl_usb_hs_switch)) |
| pr_err("unable to enable mhl_usb_hs_switch\n"); |
| } else { |
| regulator_disable(mhl_usb_hs_switch); |
| } |
| } |
| |
| static int ulpi_read(struct usb_phy *phy, u32 reg) |
| { |
| struct msm_otg *motg = container_of(phy, struct msm_otg, phy); |
| int cnt = 0; |
| |
| /* initiate read operation */ |
| writel(ULPI_RUN | ULPI_READ | ULPI_ADDR(reg), |
| USB_ULPI_VIEWPORT); |
| |
| /* wait for completion */ |
| while (cnt < ULPI_IO_TIMEOUT_USEC) { |
| if (!(readl(USB_ULPI_VIEWPORT) & ULPI_RUN)) |
| break; |
| udelay(1); |
| cnt++; |
| } |
| |
| if (cnt >= ULPI_IO_TIMEOUT_USEC) { |
| dev_err(phy->dev, "ulpi_read: timeout %08x\n", |
| readl(USB_ULPI_VIEWPORT)); |
| return -ETIMEDOUT; |
| } |
| return ULPI_DATA_READ(readl(USB_ULPI_VIEWPORT)); |
| } |
| |
| static int ulpi_write(struct usb_phy *phy, u32 val, u32 reg) |
| { |
| struct msm_otg *motg = container_of(phy, struct msm_otg, phy); |
| int cnt = 0; |
| |
| /* initiate write operation */ |
| writel(ULPI_RUN | ULPI_WRITE | |
| ULPI_ADDR(reg) | ULPI_DATA(val), |
| USB_ULPI_VIEWPORT); |
| |
| /* wait for completion */ |
| while (cnt < ULPI_IO_TIMEOUT_USEC) { |
| if (!(readl(USB_ULPI_VIEWPORT) & ULPI_RUN)) |
| break; |
| udelay(1); |
| cnt++; |
| } |
| |
| if (cnt >= ULPI_IO_TIMEOUT_USEC) { |
| dev_err(phy->dev, "ulpi_write: timeout\n"); |
| return -ETIMEDOUT; |
| } |
| return 0; |
| } |
| |
| static struct usb_phy_io_ops msm_otg_io_ops = { |
| .read = ulpi_read, |
| .write = ulpi_write, |
| }; |
| |
| static void ulpi_init(struct msm_otg *motg) |
| { |
| struct msm_otg_platform_data *pdata = motg->pdata; |
| int aseq[10]; |
| int *seq = NULL; |
| |
| if (override_phy_init) { |
| pr_debug("%s(): HUSB PHY Init:%s\n", __func__, |
| override_phy_init); |
| get_options(override_phy_init, ARRAY_SIZE(aseq), aseq); |
| seq = &aseq[1]; |
| } else { |
| seq = pdata->phy_init_seq; |
| } |
| |
| if (!seq) |
| return; |
| |
| while (seq[0] >= 0) { |
| if (override_phy_init) |
| pr_debug("ulpi: write 0x%02x to 0x%02x\n", |
| seq[0], seq[1]); |
| |
| dev_vdbg(motg->phy.dev, "ulpi: write 0x%02x to 0x%02x\n", |
| seq[0], seq[1]); |
| ulpi_write(&motg->phy, seq[0], seq[1]); |
| seq += 2; |
| } |
| } |
| |
| static int msm_otg_link_clk_reset(struct msm_otg *motg, bool assert) |
| { |
| int ret; |
| |
| if (assert) { |
| if (!IS_ERR(motg->clk)) { |
| ret = clk_reset(motg->clk, CLK_RESET_ASSERT); |
| } else { |
| /* Using asynchronous block reset to the hardware */ |
| dev_dbg(motg->phy.dev, "block_reset ASSERT\n"); |
| clk_disable_unprepare(motg->pclk); |
| clk_disable_unprepare(motg->core_clk); |
| ret = clk_reset(motg->core_clk, CLK_RESET_ASSERT); |
| } |
| if (ret) |
| dev_err(motg->phy.dev, "usb hs_clk assert failed\n"); |
| } else { |
| if (!IS_ERR(motg->clk)) { |
| ret = clk_reset(motg->clk, CLK_RESET_DEASSERT); |
| } else { |
| dev_dbg(motg->phy.dev, "block_reset DEASSERT\n"); |
| ret = clk_reset(motg->core_clk, CLK_RESET_DEASSERT); |
| ndelay(200); |
| clk_prepare_enable(motg->core_clk); |
| clk_prepare_enable(motg->pclk); |
| } |
| if (ret) |
| dev_err(motg->phy.dev, "usb hs_clk deassert failed\n"); |
| } |
| return ret; |
| } |
| |
| static int msm_otg_phy_clk_reset(struct msm_otg *motg) |
| { |
| int ret; |
| |
| if (IS_ERR(motg->phy_reset_clk)) |
| return 0; |
| |
| ret = clk_reset(motg->phy_reset_clk, CLK_RESET_ASSERT); |
| if (ret) { |
| dev_err(motg->phy.dev, "usb phy clk assert failed\n"); |
| return ret; |
| } |
| usleep_range(10000, 12000); |
| ret = clk_reset(motg->phy_reset_clk, CLK_RESET_DEASSERT); |
| if (ret) |
| dev_err(motg->phy.dev, "usb phy clk deassert failed\n"); |
| return ret; |
| } |
| |
| static int msm_otg_phy_reset(struct msm_otg *motg) |
| { |
| u32 val; |
| int ret; |
| int retries; |
| struct msm_otg_platform_data *pdata = motg->pdata; |
| |
| ret = msm_otg_link_clk_reset(motg, 1); |
| if (ret) |
| return ret; |
| ret = msm_otg_phy_clk_reset(motg); |
| if (ret) |
| return ret; |
| |
| /* |
| * 10 usec delay is required according to spec. Using larger value |
| * since the exact value proved to not work 100% of the time. |
| */ |
| if (IS_ERR(motg->phy_reset_clk)) |
| usleep_range(100, 120); |
| ret = msm_otg_link_clk_reset(motg, 0); |
| if (ret) |
| return ret; |
| |
| if (pdata && pdata->enable_sec_phy) |
| writel_relaxed(readl_relaxed(USB_PHY_CTRL2) | (1<<16), |
| USB_PHY_CTRL2); |
| val = readl(USB_PORTSC) & ~PORTSC_PTS_MASK; |
| writel(val | PORTSC_PTS_ULPI, USB_PORTSC); |
| |
| for (retries = 3; retries > 0; retries--) { |
| ret = ulpi_write(&motg->phy, ULPI_FUNC_CTRL_SUSPENDM, |
| ULPI_CLR(ULPI_FUNC_CTRL)); |
| if (!ret) |
| break; |
| ret = msm_otg_phy_clk_reset(motg); |
| if (ret) |
| return ret; |
| } |
| if (!retries) |
| return -ETIMEDOUT; |
| |
| /* This reset calibrates the phy, if the above write succeeded */ |
| ret = msm_otg_phy_clk_reset(motg); |
| if (ret) |
| return ret; |
| |
| for (retries = 3; retries > 0; retries--) { |
| ret = ulpi_read(&motg->phy, ULPI_DEBUG); |
| if (ret != -ETIMEDOUT) |
| break; |
| ret = msm_otg_phy_clk_reset(motg); |
| if (ret) |
| return ret; |
| } |
| if (!retries) |
| return -ETIMEDOUT; |
| |
| dev_info(motg->phy.dev, "phy_reset: success\n"); |
| return 0; |
| } |
| |
| #define LINK_RESET_TIMEOUT_USEC (250 * 1000) |
| static int msm_otg_link_reset(struct msm_otg *motg) |
| { |
| int cnt = 0; |
| struct msm_otg_platform_data *pdata = motg->pdata; |
| |
| writel_relaxed(USBCMD_RESET, USB_USBCMD); |
| while (cnt < LINK_RESET_TIMEOUT_USEC) { |
| if (!(readl_relaxed(USB_USBCMD) & USBCMD_RESET)) |
| break; |
| udelay(1); |
| cnt++; |
| } |
| if (cnt >= LINK_RESET_TIMEOUT_USEC) |
| return -ETIMEDOUT; |
| |
| /* select ULPI phy */ |
| writel_relaxed(0x80000000, USB_PORTSC); |
| writel_relaxed(0x0, USB_AHBBURST); |
| writel_relaxed(0x08, USB_AHBMODE); |
| |
| if (pdata && pdata->enable_sec_phy) |
| writel_relaxed(readl_relaxed(USB_PHY_CTRL2) | (1<<16), |
| USB_PHY_CTRL2); |
| return 0; |
| } |
| |
| static int msm_otg_reset(struct usb_phy *phy) |
| { |
| struct msm_otg *motg = container_of(phy, struct msm_otg, phy); |
| struct msm_otg_platform_data *pdata = motg->pdata; |
| int ret; |
| u32 val = 0; |
| u32 ulpi_val = 0; |
| |
| /* |
| * USB PHY and Link reset also reset the USB BAM. |
| * Thus perform reset operation only once to avoid |
| * USB BAM reset on other cases e.g. USB cable disconnections. |
| */ |
| if (pdata->disable_reset_on_disconnect) { |
| if (motg->reset_counter) |
| return 0; |
| else |
| motg->reset_counter++; |
| } |
| |
| if (!IS_ERR(motg->clk)) |
| clk_prepare_enable(motg->clk); |
| ret = msm_otg_phy_reset(motg); |
| if (ret) { |
| dev_err(phy->dev, "phy_reset failed\n"); |
| return ret; |
| } |
| |
| aca_id_turned_on = false; |
| ret = msm_otg_link_reset(motg); |
| if (ret) { |
| dev_err(phy->dev, "link reset failed\n"); |
| return ret; |
| } |
| msleep(100); |
| |
| ulpi_init(motg); |
| |
| /* Ensure that RESET operation is completed before turning off clock */ |
| mb(); |
| |
| if (!IS_ERR(motg->clk)) |
| clk_disable_unprepare(motg->clk); |
| |
| if (pdata->otg_control == OTG_PHY_CONTROL) { |
| val = readl_relaxed(USB_OTGSC); |
| if (pdata->mode == USB_OTG) { |
| ulpi_val = ULPI_INT_IDGRD | ULPI_INT_SESS_VALID; |
| val |= OTGSC_IDIE | OTGSC_BSVIE; |
| } else if (pdata->mode == USB_PERIPHERAL) { |
| ulpi_val = ULPI_INT_SESS_VALID; |
| val |= OTGSC_BSVIE; |
| } |
| writel_relaxed(val, USB_OTGSC); |
| ulpi_write(phy, ulpi_val, ULPI_USB_INT_EN_RISE); |
| ulpi_write(phy, ulpi_val, ULPI_USB_INT_EN_FALL); |
| } else if (pdata->otg_control == OTG_PMIC_CONTROL) { |
| ulpi_write(phy, OTG_COMP_DISABLE, |
| ULPI_SET(ULPI_PWR_CLK_MNG_REG)); |
| /* Enable PMIC pull-up */ |
| pm8xxx_usb_id_pullup(1); |
| } |
| |
| return 0; |
| } |
| |
| static const char *timer_string(int bit) |
| { |
| switch (bit) { |
| case A_WAIT_VRISE: return "a_wait_vrise"; |
| case A_WAIT_VFALL: return "a_wait_vfall"; |
| case B_SRP_FAIL: return "b_srp_fail"; |
| case A_WAIT_BCON: return "a_wait_bcon"; |
| case A_AIDL_BDIS: return "a_aidl_bdis"; |
| case A_BIDL_ADIS: return "a_bidl_adis"; |
| case B_ASE0_BRST: return "b_ase0_brst"; |
| case A_TST_MAINT: return "a_tst_maint"; |
| case B_TST_SRP: return "b_tst_srp"; |
| case B_TST_CONFIG: return "b_tst_config"; |
| default: return "UNDEFINED"; |
| } |
| } |
| |
| static enum hrtimer_restart msm_otg_timer_func(struct hrtimer *hrtimer) |
| { |
| struct msm_otg *motg = container_of(hrtimer, struct msm_otg, timer); |
| |
| switch (motg->active_tmout) { |
| case A_WAIT_VRISE: |
| /* TODO: use vbus_vld interrupt */ |
| set_bit(A_VBUS_VLD, &motg->inputs); |
| break; |
| case A_TST_MAINT: |
| /* OTG PET: End session after TA_TST_MAINT */ |
| set_bit(A_BUS_DROP, &motg->inputs); |
| break; |
| case B_TST_SRP: |
| /* |
| * OTG PET: Initiate SRP after TB_TST_SRP of |
| * previous session end. |
| */ |
| set_bit(B_BUS_REQ, &motg->inputs); |
| break; |
| case B_TST_CONFIG: |
| clear_bit(A_CONN, &motg->inputs); |
| break; |
| default: |
| set_bit(motg->active_tmout, &motg->tmouts); |
| } |
| |
| pr_debug("expired %s timer\n", timer_string(motg->active_tmout)); |
| queue_work(system_nrt_wq, &motg->sm_work); |
| return HRTIMER_NORESTART; |
| } |
| |
| static void msm_otg_del_timer(struct msm_otg *motg) |
| { |
| int bit = motg->active_tmout; |
| |
| pr_debug("deleting %s timer. remaining %lld msec\n", timer_string(bit), |
| div_s64(ktime_to_us(hrtimer_get_remaining( |
| &motg->timer)), 1000)); |
| hrtimer_cancel(&motg->timer); |
| clear_bit(bit, &motg->tmouts); |
| } |
| |
| static void msm_otg_start_timer(struct msm_otg *motg, int time, int bit) |
| { |
| clear_bit(bit, &motg->tmouts); |
| motg->active_tmout = bit; |
| pr_debug("starting %s timer\n", timer_string(bit)); |
| hrtimer_start(&motg->timer, |
| ktime_set(time / 1000, (time % 1000) * 1000000), |
| HRTIMER_MODE_REL); |
| } |
| |
| static void msm_otg_init_timer(struct msm_otg *motg) |
| { |
| hrtimer_init(&motg->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); |
| motg->timer.function = msm_otg_timer_func; |
| } |
| |
| static int msm_otg_start_hnp(struct usb_otg *otg) |
| { |
| struct msm_otg *motg = container_of(otg->phy, struct msm_otg, phy); |
| |
| if (otg->phy->state != OTG_STATE_A_HOST) { |
| pr_err("HNP can not be initiated in %s state\n", |
| otg_state_string(otg->phy->state)); |
| return -EINVAL; |
| } |
| |
| pr_debug("A-Host: HNP initiated\n"); |
| clear_bit(A_BUS_REQ, &motg->inputs); |
| queue_work(system_nrt_wq, &motg->sm_work); |
| return 0; |
| } |
| |
| static int msm_otg_start_srp(struct usb_otg *otg) |
| { |
| struct msm_otg *motg = container_of(otg->phy, struct msm_otg, phy); |
| u32 val; |
| int ret = 0; |
| |
| if (otg->phy->state != OTG_STATE_B_IDLE) { |
| pr_err("SRP can not be initiated in %s state\n", |
| otg_state_string(otg->phy->state)); |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| if ((jiffies - motg->b_last_se0_sess) < msecs_to_jiffies(TB_SRP_INIT)) { |
| pr_debug("initial conditions of SRP are not met. Try again" |
| "after some time\n"); |
| ret = -EAGAIN; |
| goto out; |
| } |
| |
| pr_debug("B-Device SRP started\n"); |
| |
| /* |
| * PHY won't pull D+ high unless it detects Vbus valid. |
| * Since by definition, SRP is only done when Vbus is not valid, |
| * software work-around needs to be used to spoof the PHY into |
| * thinking it is valid. This can be done using the VBUSVLDEXTSEL and |
| * VBUSVLDEXT register bits. |
| */ |
| ulpi_write(otg->phy, 0x03, 0x97); |
| /* |
| * Harware auto assist data pulsing: Data pulse is given |
| * for 7msec; wait for vbus |
| */ |
| val = readl_relaxed(USB_OTGSC); |
| writel_relaxed((val & ~OTGSC_INTSTS_MASK) | OTGSC_HADP, USB_OTGSC); |
| |
| /* VBUS plusing is obsoleted in OTG 2.0 supplement */ |
| out: |
| return ret; |
| } |
| |
| static void msm_otg_host_hnp_enable(struct usb_otg *otg, bool enable) |
| { |
| struct usb_hcd *hcd = bus_to_hcd(otg->host); |
| struct usb_device *rhub = otg->host->root_hub; |
| |
| if (enable) { |
| pm_runtime_disable(&rhub->dev); |
| rhub->state = USB_STATE_NOTATTACHED; |
| hcd->driver->bus_suspend(hcd); |
| clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); |
| } else { |
| usb_remove_hcd(hcd); |
| msm_otg_reset(otg->phy); |
| usb_add_hcd(hcd, hcd->irq, IRQF_SHARED); |
| } |
| } |
| |
| static int msm_otg_set_suspend(struct usb_phy *phy, int suspend) |
| { |
| struct msm_otg *motg = container_of(phy, struct msm_otg, phy); |
| |
| if (aca_enabled()) |
| return 0; |
| |
| /* |
| * UDC and HCD call usb_phy_set_suspend() to enter/exit LPM |
| * during bus suspend/resume. Update the relevant state |
| * machine inputs and trigger LPM entry/exit. Checking |
| * in_lpm flag would avoid unnecessary work scheduling. |
| */ |
| if (suspend) { |
| switch (phy->state) { |
| case OTG_STATE_A_WAIT_BCON: |
| if (TA_WAIT_BCON > 0) |
| break; |
| /* fall through */ |
| case OTG_STATE_A_HOST: |
| pr_debug("host bus suspend\n"); |
| clear_bit(A_BUS_REQ, &motg->inputs); |
| if (!atomic_read(&motg->in_lpm)) |
| queue_work(system_nrt_wq, &motg->sm_work); |
| break; |
| case OTG_STATE_B_PERIPHERAL: |
| pr_debug("peripheral bus suspend\n"); |
| if (!(motg->caps & ALLOW_LPM_ON_DEV_SUSPEND)) |
| break; |
| set_bit(A_BUS_SUSPEND, &motg->inputs); |
| if (!atomic_read(&motg->in_lpm)) |
| queue_delayed_work(system_nrt_wq, |
| &motg->suspend_work, |
| USB_SUSPEND_DELAY_TIME); |
| break; |
| |
| default: |
| break; |
| } |
| } else { |
| switch (phy->state) { |
| case OTG_STATE_A_WAIT_BCON: |
| /* Remote wakeup or resume */ |
| set_bit(A_BUS_REQ, &motg->inputs); |
| /* ensure hardware is not in low power mode */ |
| if (atomic_read(&motg->in_lpm)) |
| pm_runtime_resume(phy->dev); |
| break; |
| case OTG_STATE_A_SUSPEND: |
| /* Remote wakeup or resume */ |
| set_bit(A_BUS_REQ, &motg->inputs); |
| phy->state = OTG_STATE_A_HOST; |
| |
| /* ensure hardware is not in low power mode */ |
| if (atomic_read(&motg->in_lpm)) |
| pm_runtime_resume(phy->dev); |
| break; |
| case OTG_STATE_B_PERIPHERAL: |
| pr_debug("peripheral bus resume\n"); |
| if (!(motg->caps & ALLOW_LPM_ON_DEV_SUSPEND)) |
| break; |
| clear_bit(A_BUS_SUSPEND, &motg->inputs); |
| if (atomic_read(&motg->in_lpm)) |
| queue_work(system_nrt_wq, &motg->sm_work); |
| break; |
| default: |
| break; |
| } |
| } |
| return 0; |
| } |
| |
| #define PHY_SUSPEND_TIMEOUT_USEC (500 * 1000) |
| #define PHY_RESUME_TIMEOUT_USEC (100 * 1000) |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int msm_otg_suspend(struct msm_otg *motg) |
| { |
| struct usb_phy *phy = &motg->phy; |
| struct usb_bus *bus = phy->otg->host; |
| struct msm_otg_platform_data *pdata = motg->pdata; |
| int cnt = 0; |
| bool host_bus_suspend, device_bus_suspend, dcp, prop_charger; |
| u32 phy_ctrl_val = 0, cmd_val; |
| unsigned ret; |
| u32 portsc; |
| |
| if (atomic_read(&motg->in_lpm)) |
| return 0; |
| |
| if (motg->pdata->delay_lpm_hndshk_on_disconnect && !msm_bam_lpm_ok()) |
| return -EBUSY; |
| |
| disable_irq(motg->irq); |
| host_bus_suspend = !test_bit(MHL, &motg->inputs) && phy->otg->host && |
| !test_bit(ID, &motg->inputs); |
| device_bus_suspend = phy->otg->gadget && test_bit(ID, &motg->inputs) && |
| test_bit(A_BUS_SUSPEND, &motg->inputs) && |
| motg->caps & ALLOW_LPM_ON_DEV_SUSPEND; |
| dcp = motg->chg_type == USB_DCP_CHARGER; |
| prop_charger = motg->chg_type == USB_PROPRIETARY_CHARGER; |
| |
| /* |
| * Abort suspend when, |
| * 1. charging detection in progress due to cable plug-in |
| * 2. host mode activation in progress due to Micro-A cable insertion |
| */ |
| |
| if ((test_bit(B_SESS_VLD, &motg->inputs) && !device_bus_suspend && |
| !dcp && !prop_charger) || test_bit(A_BUS_REQ, &motg->inputs)) { |
| enable_irq(motg->irq); |
| return -EBUSY; |
| } |
| |
| /* |
| * Chipidea 45-nm PHY suspend sequence: |
| * |
| * Interrupt Latch Register auto-clear feature is not present |
| * in all PHY versions. Latch register is clear on read type. |
| * Clear latch register to avoid spurious wakeup from |
| * low power mode (LPM). |
| * |
| * PHY comparators are disabled when PHY enters into low power |
| * mode (LPM). Keep PHY comparators ON in LPM only when we expect |
| * VBUS/Id notifications from USB PHY. Otherwise turn off USB |
| * PHY comparators. This save significant amount of power. |
| * |
| * PLL is not turned off when PHY enters into low power mode (LPM). |
| * Disable PLL for maximum power savings. |
| */ |
| |
| if (motg->pdata->phy_type == CI_45NM_INTEGRATED_PHY) { |
| ulpi_read(phy, 0x14); |
| if (pdata->otg_control == OTG_PHY_CONTROL) |
| ulpi_write(phy, 0x01, 0x30); |
| ulpi_write(phy, 0x08, 0x09); |
| } |
| |
| |
| /* Set the PHCD bit, only if it is not set by the controller. |
| * PHY may take some time or even fail to enter into low power |
| * mode (LPM). Hence poll for 500 msec and reset the PHY and link |
| * in failure case. |
| */ |
| portsc = readl_relaxed(USB_PORTSC); |
| if (!(portsc & PORTSC_PHCD)) { |
| writel_relaxed(portsc | PORTSC_PHCD, |
| USB_PORTSC); |
| while (cnt < PHY_SUSPEND_TIMEOUT_USEC) { |
| if (readl_relaxed(USB_PORTSC) & PORTSC_PHCD) |
| break; |
| udelay(1); |
| cnt++; |
| } |
| } |
| |
| if (cnt >= PHY_SUSPEND_TIMEOUT_USEC) { |
| dev_err(phy->dev, "Unable to suspend PHY\n"); |
| msm_otg_reset(phy); |
| enable_irq(motg->irq); |
| return -ETIMEDOUT; |
| } |
| |
| /* |
| * PHY has capability to generate interrupt asynchronously in low |
| * power mode (LPM). This interrupt is level triggered. So USB IRQ |
| * line must be disabled till async interrupt enable bit is cleared |
| * in USBCMD register. Assert STP (ULPI interface STOP signal) to |
| * block data communication from PHY. |
| * |
| * PHY retention mode is disallowed while entering to LPM with wall |
| * charger connected. But PHY is put into suspend mode. Hence |
| * enable asynchronous interrupt to detect charger disconnection when |
| * PMIC notifications are unavailable. |
| */ |
| cmd_val = readl_relaxed(USB_USBCMD); |
| if (host_bus_suspend || device_bus_suspend || |
| (motg->pdata->otg_control == OTG_PHY_CONTROL)) |
| cmd_val |= ASYNC_INTR_CTRL | ULPI_STP_CTRL; |
| else |
| cmd_val |= ULPI_STP_CTRL; |
| writel_relaxed(cmd_val, USB_USBCMD); |
| |
| /* |
| * BC1.2 spec mandates PD to enable VDP_SRC when charging from DCP. |
| * PHY retention and collapse can not happen with VDP_SRC enabled. |
| */ |
| if (motg->caps & ALLOW_PHY_RETENTION && !host_bus_suspend && |
| !device_bus_suspend && !dcp) { |
| phy_ctrl_val = readl_relaxed(USB_PHY_CTRL); |
| if (motg->pdata->otg_control == OTG_PHY_CONTROL) { |
| /* Enable PHY HV interrupts to wake MPM/Link */ |
| if ((motg->pdata->mode == USB_OTG) || |
| (motg->pdata->mode == USB_HOST)) |
| phy_ctrl_val |= (PHY_IDHV_INTEN | |
| PHY_OTGSESSVLDHV_INTEN); |
| else |
| phy_ctrl_val |= PHY_OTGSESSVLDHV_INTEN; |
| } |
| |
| writel_relaxed(phy_ctrl_val & ~PHY_RETEN, USB_PHY_CTRL); |
| motg->lpm_flags |= PHY_RETENTIONED; |
| } |
| |
| /* Ensure that above operation is completed before turning off clocks */ |
| mb(); |
| /* Consider clocks on workaround flag only in case of bus suspend */ |
| if (!(phy->state == OTG_STATE_B_PERIPHERAL && |
| test_bit(A_BUS_SUSPEND, &motg->inputs)) || |
| !motg->pdata->core_clk_always_on_workaround) { |
| clk_disable_unprepare(motg->pclk); |
| clk_disable_unprepare(motg->core_clk); |
| motg->lpm_flags |= CLOCKS_DOWN; |
| } |
| |
| /* usb phy no more require TCXO clock, hence vote for TCXO disable */ |
| if (!host_bus_suspend) { |
| if (!IS_ERR(motg->xo_clk)) { |
| clk_disable_unprepare(motg->xo_clk); |
| motg->lpm_flags |= XO_SHUTDOWN; |
| } else { |
| ret = msm_xo_mode_vote(motg->xo_handle, |
| MSM_XO_MODE_OFF); |
| if (ret) |
| dev_err(phy->dev, "%s fail to devote XO %d\n", |
| __func__, ret); |
| else |
| motg->lpm_flags |= XO_SHUTDOWN; |
| } |
| } |
| |
| if (motg->caps & ALLOW_PHY_POWER_COLLAPSE && |
| !host_bus_suspend && !dcp) { |
| msm_hsusb_ldo_enable(motg, USB_PHY_REG_OFF); |
| motg->lpm_flags |= PHY_PWR_COLLAPSED; |
| } else if (motg->caps & ALLOW_PHY_REGULATORS_LPM && |
| !host_bus_suspend && !device_bus_suspend && !dcp) { |
| msm_hsusb_ldo_enable(motg, USB_PHY_REG_LPM_ON); |
| motg->lpm_flags |= PHY_REGULATORS_LPM; |
| } |
| |
| if (motg->lpm_flags & PHY_RETENTIONED) { |
| msm_hsusb_config_vddcx(0); |
| msm_hsusb_mhl_switch_enable(motg, 0); |
| } |
| |
| if (device_may_wakeup(phy->dev)) { |
| if (motg->async_irq) |
| enable_irq_wake(motg->async_irq); |
| else |
| enable_irq_wake(motg->irq); |
| |
| if (motg->pdata->pmic_id_irq) |
| enable_irq_wake(motg->pdata->pmic_id_irq); |
| if (pdata->otg_control == OTG_PHY_CONTROL && |
| pdata->mpm_otgsessvld_int) |
| msm_mpm_set_pin_wake(pdata->mpm_otgsessvld_int, 1); |
| } |
| if (bus) |
| clear_bit(HCD_FLAG_HW_ACCESSIBLE, &(bus_to_hcd(bus))->flags); |
| |
| atomic_set(&motg->in_lpm, 1); |
| /* Enable ASYNC IRQ (if present) during LPM */ |
| if (motg->async_irq) |
| enable_irq(motg->async_irq); |
| enable_irq(motg->irq); |
| wake_unlock(&motg->wlock); |
| |
| dev_info(phy->dev, "USB in low power mode\n"); |
| |
| return 0; |
| } |
| |
| static int msm_otg_resume(struct msm_otg *motg) |
| { |
| struct usb_phy *phy = &motg->phy; |
| struct usb_bus *bus = phy->otg->host; |
| struct msm_otg_platform_data *pdata = motg->pdata; |
| int cnt = 0; |
| unsigned temp; |
| u32 phy_ctrl_val = 0; |
| unsigned ret; |
| |
| if (!atomic_read(&motg->in_lpm)) |
| return 0; |
| |
| disable_irq(motg->irq); |
| wake_lock(&motg->wlock); |
| |
| /* Vote for TCXO when waking up the phy */ |
| if (motg->lpm_flags & XO_SHUTDOWN) { |
| if (!IS_ERR(motg->xo_clk)) { |
| clk_prepare_enable(motg->xo_clk); |
| } else { |
| ret = msm_xo_mode_vote(motg->xo_handle, MSM_XO_MODE_ON); |
| if (ret) |
| dev_err(phy->dev, "%s fail to vote for XO %d\n", |
| __func__, ret); |
| } |
| motg->lpm_flags &= ~XO_SHUTDOWN; |
| } |
| |
| if (motg->lpm_flags & CLOCKS_DOWN) { |
| clk_prepare_enable(motg->core_clk); |
| clk_prepare_enable(motg->pclk); |
| motg->lpm_flags &= ~CLOCKS_DOWN; |
| } |
| |
| if (motg->lpm_flags & PHY_PWR_COLLAPSED) { |
| msm_hsusb_ldo_enable(motg, USB_PHY_REG_ON); |
| motg->lpm_flags &= ~PHY_PWR_COLLAPSED; |
| } else if (motg->lpm_flags & PHY_REGULATORS_LPM) { |
| msm_hsusb_ldo_enable(motg, USB_PHY_REG_LPM_OFF); |
| motg->lpm_flags &= ~PHY_REGULATORS_LPM; |
| } |
| |
| if (motg->lpm_flags & PHY_RETENTIONED) { |
| msm_hsusb_mhl_switch_enable(motg, 1); |
| msm_hsusb_config_vddcx(1); |
| phy_ctrl_val = readl_relaxed(USB_PHY_CTRL); |
| phy_ctrl_val |= PHY_RETEN; |
| if (motg->pdata->otg_control == OTG_PHY_CONTROL) |
| /* Disable PHY HV interrupts */ |
| phy_ctrl_val &= |
| ~(PHY_IDHV_INTEN | PHY_OTGSESSVLDHV_INTEN); |
| writel_relaxed(phy_ctrl_val, USB_PHY_CTRL); |
| motg->lpm_flags &= ~PHY_RETENTIONED; |
| } |
| |
| temp = readl(USB_USBCMD); |
| temp &= ~ASYNC_INTR_CTRL; |
| temp &= ~ULPI_STP_CTRL; |
| writel(temp, USB_USBCMD); |
| |
| /* |
| * PHY comes out of low power mode (LPM) in case of wakeup |
| * from asynchronous interrupt. |
| */ |
| if (!(readl(USB_PORTSC) & PORTSC_PHCD)) |
| goto skip_phy_resume; |
| |
| writel(readl(USB_PORTSC) & ~PORTSC_PHCD, USB_PORTSC); |
| while (cnt < PHY_RESUME_TIMEOUT_USEC) { |
| if (!(readl(USB_PORTSC) & PORTSC_PHCD)) |
| break; |
| udelay(1); |
| cnt++; |
| } |
| |
| if (cnt >= PHY_RESUME_TIMEOUT_USEC) { |
| /* |
| * This is a fatal error. Reset the link and |
| * PHY. USB state can not be restored. Re-insertion |
| * of USB cable is the only way to get USB working. |
| */ |
| dev_err(phy->dev, "Unable to resume USB." |
| "Re-plugin the cable\n"); |
| msm_otg_reset(phy); |
| } |
| |
| skip_phy_resume: |
| if (device_may_wakeup(phy->dev)) { |
| if (motg->async_irq) |
| disable_irq_wake(motg->async_irq); |
| else |
| disable_irq_wake(motg->irq); |
| |
| if (motg->pdata->pmic_id_irq) |
| disable_irq_wake(motg->pdata->pmic_id_irq); |
| if (pdata->otg_control == OTG_PHY_CONTROL && |
| pdata->mpm_otgsessvld_int) |
| msm_mpm_set_pin_wake(pdata->mpm_otgsessvld_int, 0); |
| } |
| if (bus) |
| set_bit(HCD_FLAG_HW_ACCESSIBLE, &(bus_to_hcd(bus))->flags); |
| |
| atomic_set(&motg->in_lpm, 0); |
| |
| if (motg->async_int) { |
| /* Match the disable_irq call from ISR */ |
| enable_irq(motg->async_int); |
| motg->async_int = 0; |
| } |
| enable_irq(motg->irq); |
| |
| /* If ASYNC IRQ is present then keep it enabled only during LPM */ |
| if (motg->async_irq) |
| disable_irq(motg->async_irq); |
| |
| dev_info(phy->dev, "USB exited from low power mode\n"); |
| |
| return 0; |
| } |
| #endif |
| |
| static void msm_otg_notify_host_mode(struct msm_otg *motg, bool host_mode) |
| { |
| if (!psy) { |
| pr_err("No USB power supply registered!\n"); |
| return; |
| } |
| |
| if (legacy_power_supply) { |
| /* legacy support */ |
| if (host_mode) { |
| power_supply_set_scope(psy, POWER_SUPPLY_SCOPE_SYSTEM); |
| } else { |
| power_supply_set_scope(psy, POWER_SUPPLY_SCOPE_DEVICE); |
| /* |
| * VBUS comparator is disabled by PMIC charging driver |
| * when SYSTEM scope is selected. For ID_GND->ID_A |
| * transition, give 50 msec delay so that PMIC charger |
| * driver detect the VBUS and ready for accepting |
| * charging current value from USB. |
| */ |
| if (test_bit(ID_A, &motg->inputs)) |
| msleep(50); |
| } |
| } else { |
| motg->host_mode = host_mode; |
| power_supply_changed(psy); |
| } |
| } |
| |
| static int msm_otg_notify_chg_type(struct msm_otg *motg) |
| { |
| static int charger_type; |
| |
| /* |
| * TODO |
| * Unify OTG driver charger types and power supply charger types |
| */ |
| if (charger_type == motg->chg_type) |
| return 0; |
| |
| if (motg->chg_type == USB_SDP_CHARGER) |
| charger_type = POWER_SUPPLY_TYPE_USB; |
| else if (motg->chg_type == USB_CDP_CHARGER) |
| charger_type = POWER_SUPPLY_TYPE_USB_CDP; |
| else if (motg->chg_type == USB_DCP_CHARGER || |
| motg->chg_type == USB_PROPRIETARY_CHARGER) |
| charger_type = POWER_SUPPLY_TYPE_USB_DCP; |
| else if ((motg->chg_type == USB_ACA_DOCK_CHARGER || |
| motg->chg_type == USB_ACA_A_CHARGER || |
| motg->chg_type == USB_ACA_B_CHARGER || |
| motg->chg_type == USB_ACA_C_CHARGER)) |
| charger_type = POWER_SUPPLY_TYPE_USB_ACA; |
| else |
| charger_type = POWER_SUPPLY_TYPE_UNKNOWN; |
| |
| if (!psy) { |
| pr_err("No USB power supply registered!\n"); |
| return -EINVAL; |
| } |
| |
| pr_debug("setting usb power supply type %d\n", charger_type); |
| power_supply_set_supply_type(psy, charger_type); |
| return 0; |
| } |
| |
| static int msm_otg_notify_power_supply(struct msm_otg *motg, unsigned mA) |
| { |
| if (!psy) { |
| dev_dbg(motg->phy.dev, "no usb power supply registered\n"); |
| goto psy_error; |
| } |
| |
| if (motg->cur_power == 0 && mA > 2) { |
| /* Enable charging */ |
| if (power_supply_set_online(psy, true)) |
| goto psy_error; |
| if (power_supply_set_current_limit(psy, 1000*mA)) |
| goto psy_error; |
| } else if (motg->cur_power > 0 && (mA == 0 || mA == 2)) { |
| /* Disable charging */ |
| if (power_supply_set_online(psy, false)) |
| goto psy_error; |
| /* Set max current limit */ |
| if (power_supply_set_current_limit(psy, 0)) |
| goto psy_error; |
| } else { |
| if (power_supply_set_online(psy, true)) |
| goto psy_error; |
| /* Current has changed (100/2 --> 500) */ |
| if (power_supply_set_current_limit(psy, 1000*mA)) |
| goto psy_error; |
| } |
| |
| power_supply_changed(psy); |
| return 0; |
| |
| psy_error: |
| dev_dbg(motg->phy.dev, "power supply error when setting property\n"); |
| return -ENXIO; |
| } |
| |
| static void msm_otg_notify_charger(struct msm_otg *motg, unsigned mA) |
| { |
| struct usb_gadget *g = motg->phy.otg->gadget; |
| |
| if (g && g->is_a_peripheral) |
| return; |
| |
| if ((motg->chg_type == USB_ACA_DOCK_CHARGER || |
| motg->chg_type == USB_ACA_A_CHARGER || |
| motg->chg_type == USB_ACA_B_CHARGER || |
| motg->chg_type == USB_ACA_C_CHARGER) && |
| mA > IDEV_ACA_CHG_LIMIT) |
| mA = IDEV_ACA_CHG_LIMIT; |
| |
| if (msm_otg_notify_chg_type(motg)) |
| dev_err(motg->phy.dev, |
| "Failed notifying %d charger type to PMIC\n", |
| motg->chg_type); |
| |
| if (motg->cur_power == mA) |
| return; |
| |
| dev_info(motg->phy.dev, "Avail curr from USB = %u\n", mA); |
| |
| /* |
| * Use Power Supply API if supported, otherwise fallback |
| * to legacy pm8921 API. |
| */ |
| if (msm_otg_notify_power_supply(motg, mA)) |
| pm8921_charger_vbus_draw(mA); |
| |
| motg->cur_power = mA; |
| } |
| |
| static int msm_otg_set_power(struct usb_phy *phy, unsigned mA) |
| { |
| struct msm_otg *motg = container_of(phy, struct msm_otg, phy); |
| |
| /* |
| * Gadget driver uses set_power method to notify about the |
| * available current based on suspend/configured states. |
| * |
| * IDEV_CHG can be drawn irrespective of suspend/un-configured |
| * states when CDP/ACA is connected. |
| */ |
| if (motg->chg_type == USB_SDP_CHARGER) |
| msm_otg_notify_charger(motg, mA); |
| |
| return 0; |
| } |
| |
| static void msm_otg_start_host(struct usb_otg *otg, int on) |
| { |
| struct msm_otg *motg = container_of(otg->phy, struct msm_otg, phy); |
| struct msm_otg_platform_data *pdata = motg->pdata; |
| struct usb_hcd *hcd; |
| |
| if (!otg->host) |
| return; |
| |
| hcd = bus_to_hcd(otg->host); |
| |
| if (on) { |
| dev_dbg(otg->phy->dev, "host on\n"); |
| |
| if (pdata->otg_control == OTG_PHY_CONTROL) |
| ulpi_write(otg->phy, OTG_COMP_DISABLE, |
| ULPI_SET(ULPI_PWR_CLK_MNG_REG)); |
| |
| /* |
| * Some boards have a switch cotrolled by gpio |
| * to enable/disable internal HUB. Enable internal |
| * HUB before kicking the host. |
| */ |
| if (pdata->setup_gpio) |
| pdata->setup_gpio(OTG_STATE_A_HOST); |
| usb_add_hcd(hcd, hcd->irq, IRQF_SHARED); |
| } else { |
| dev_dbg(otg->phy->dev, "host off\n"); |
| |
| usb_remove_hcd(hcd); |
| /* HCD core reset all bits of PORTSC. select ULPI phy */ |
| writel_relaxed(0x80000000, USB_PORTSC); |
| |
| if (pdata->setup_gpio) |
| pdata->setup_gpio(OTG_STATE_UNDEFINED); |
| |
| if (pdata->otg_control == OTG_PHY_CONTROL) |
| ulpi_write(otg->phy, OTG_COMP_DISABLE, |
| ULPI_CLR(ULPI_PWR_CLK_MNG_REG)); |
| } |
| } |
| |
| static int msm_otg_usbdev_notify(struct notifier_block *self, |
| unsigned long action, void *priv) |
| { |
| struct msm_otg *motg = container_of(self, struct msm_otg, usbdev_nb); |
| struct usb_otg *otg = motg->phy.otg; |
| struct usb_device *udev = priv; |
| |
| if (action == USB_BUS_ADD || action == USB_BUS_REMOVE) |
| goto out; |
| |
| if (udev->bus != otg->host) |
| goto out; |
| /* |
| * Interested in devices connected directly to the root hub. |
| * ACA dock can supply IDEV_CHG irrespective devices connected |
| * on the accessory port. |
| */ |
| if (!udev->parent || udev->parent->parent || |
| motg->chg_type == USB_ACA_DOCK_CHARGER) |
| goto out; |
| |
| switch (action) { |
| case USB_DEVICE_ADD: |
| if (aca_enabled()) |
| usb_disable_autosuspend(udev); |
| if (otg->phy->state == OTG_STATE_A_WAIT_BCON) { |
| pr_debug("B_CONN set\n"); |
| set_bit(B_CONN, &motg->inputs); |
| msm_otg_del_timer(motg); |
| otg->phy->state = OTG_STATE_A_HOST; |
| /* |
| * OTG PET: A-device must end session within |
| * 10 sec after PET enumeration. |
| */ |
| if (udev->quirks & USB_QUIRK_OTG_PET) |
| msm_otg_start_timer(motg, TA_TST_MAINT, |
| A_TST_MAINT); |
| } |
| /* fall through */ |
| case USB_DEVICE_CONFIG: |
| if (udev->actconfig) |
| motg->mA_port = udev->actconfig->desc.bMaxPower * 2; |
| else |
| motg->mA_port = IUNIT; |
| if (otg->phy->state == OTG_STATE_B_HOST) |
| msm_otg_del_timer(motg); |
| break; |
| case USB_DEVICE_REMOVE: |
| if ((otg->phy->state == OTG_STATE_A_HOST) || |
| (otg->phy->state == OTG_STATE_A_SUSPEND)) { |
| pr_debug("B_CONN clear\n"); |
| clear_bit(B_CONN, &motg->inputs); |
| /* |
| * OTG PET: A-device must end session after |
| * PET disconnection if it is enumerated |
| * with bcdDevice[0] = 1. USB core sets |
| * bus->otg_vbus_off for us. clear it here. |
| */ |
| if (udev->bus->otg_vbus_off) { |
| udev->bus->otg_vbus_off = 0; |
| set_bit(A_BUS_DROP, &motg->inputs); |
| } |
| queue_work(system_nrt_wq, &motg->sm_work); |
| } |
| default: |
| break; |
| } |
| if (test_bit(ID_A, &motg->inputs)) |
| msm_otg_notify_charger(motg, IDEV_ACA_CHG_MAX - |
| motg->mA_port); |
| out: |
| return NOTIFY_OK; |
| } |
| |
| static void msm_hsusb_vbus_power(struct msm_otg *motg, bool on) |
| { |
| int ret; |
| static bool vbus_is_on; |
| |
| if (vbus_is_on == on) |
| return; |
| |
| if (motg->pdata->vbus_power) { |
| ret = motg->pdata->vbus_power(on); |
| if (!ret) |
| vbus_is_on = on; |
| return; |
| } |
| |
| if (!vbus_otg) { |
| pr_err("vbus_otg is NULL."); |
| return; |
| } |
| |
| /* |
| * if entering host mode tell the charger to not draw any current |
| * from usb before turning on the boost. |
| * if exiting host mode disable the boost before enabling to draw |
| * current from the source. |
| */ |
| if (on) { |
| msm_otg_notify_host_mode(motg, on); |
| ret = regulator_enable(vbus_otg); |
| if (ret) { |
| pr_err("unable to enable vbus_otg\n"); |
| return; |
| } |
| vbus_is_on = true; |
| } else { |
| ret = regulator_disable(vbus_otg); |
| if (ret) { |
| pr_err("unable to disable vbus_otg\n"); |
| return; |
| } |
| msm_otg_notify_host_mode(motg, on); |
| vbus_is_on = false; |
| } |
| } |
| |
| static int msm_otg_set_host(struct usb_otg *otg, struct usb_bus *host) |
| { |
| struct msm_otg *motg = container_of(otg->phy, struct msm_otg, phy); |
| struct usb_hcd *hcd; |
| |
| /* |
| * Fail host registration if this board can support |
| * only peripheral configuration. |
| */ |
| if (motg->pdata->mode == USB_PERIPHERAL) { |
| dev_info(otg->phy->dev, "Host mode is not supported\n"); |
| return -ENODEV; |
| } |
| |
| if (!motg->pdata->vbus_power && host) { |
| vbus_otg = devm_regulator_get(motg->phy.dev, "vbus_otg"); |
| if (IS_ERR(vbus_otg)) { |
| pr_err("Unable to get vbus_otg\n"); |
| return PTR_ERR(vbus_otg); |
| } |
| } |
| |
| if (!host) { |
| if (otg->phy->state == OTG_STATE_A_HOST) { |
| pm_runtime_get_sync(otg->phy->dev); |
| usb_unregister_notify(&motg->usbdev_nb); |
| msm_otg_start_host(otg, 0); |
| msm_hsusb_vbus_power(motg, 0); |
| otg->host = NULL; |
| otg->phy->state = OTG_STATE_UNDEFINED; |
| queue_work(system_nrt_wq, &motg->sm_work); |
| } else { |
| otg->host = NULL; |
| } |
| |
| return 0; |
| } |
| |
| hcd = bus_to_hcd(host); |
| hcd->power_budget = motg->pdata->power_budget; |
| |
| #ifdef CONFIG_USB_OTG |
| host->otg_port = 1; |
| #endif |
| motg->usbdev_nb.notifier_call = msm_otg_usbdev_notify; |
| usb_register_notify(&motg->usbdev_nb); |
| otg->host = host; |
| dev_dbg(otg->phy->dev, "host driver registered w/ tranceiver\n"); |
| |
| /* |
| * Kick the state machine work, if peripheral is not supported |
| * or peripheral is already registered with us. |
| */ |
| if (motg->pdata->mode == USB_HOST || otg->gadget) { |
| pm_runtime_get_sync(otg->phy->dev); |
| queue_work(system_nrt_wq, &motg->sm_work); |
| } |
| |
| return 0; |
| } |
| |
| static void msm_otg_start_peripheral(struct usb_otg *otg, int on) |
| { |
| int ret; |
| struct msm_otg *motg = container_of(otg->phy, struct msm_otg, phy); |
| struct msm_otg_platform_data *pdata = motg->pdata; |
| |
| if (!otg->gadget) |
| return; |
| |
| if (on) { |
| dev_dbg(otg->phy->dev, "gadget on\n"); |
| /* |
| * Some boards have a switch cotrolled by gpio |
| * to enable/disable internal HUB. Disable internal |
| * HUB before kicking the gadget. |
| */ |
| if (pdata->setup_gpio) |
| pdata->setup_gpio(OTG_STATE_B_PERIPHERAL); |
| |
| /* Configure BUS performance parameters for MAX bandwidth */ |
| if (motg->bus_perf_client && debug_bus_voting_enabled) { |
| ret = msm_bus_scale_client_update_request( |
| motg->bus_perf_client, 1); |
| if (ret) |
| dev_err(motg->phy.dev, "%s: Failed to vote for " |
| "bus bandwidth %d\n", __func__, ret); |
| } |
| usb_gadget_vbus_connect(otg->gadget); |
| } else { |
| dev_dbg(otg->phy->dev, "gadget off\n"); |
| usb_gadget_vbus_disconnect(otg->gadget); |
| /* Configure BUS performance parameters to default */ |
| if (motg->bus_perf_client) { |
| ret = msm_bus_scale_client_update_request( |
| motg->bus_perf_client, 0); |
| if (ret) |
| dev_err(motg->phy.dev, "%s: Failed to devote " |
| "for bus bw %d\n", __func__, ret); |
| } |
| if (pdata->setup_gpio) |
| pdata->setup_gpio(OTG_STATE_UNDEFINED); |
| } |
| |
| } |
| |
| static int msm_otg_set_peripheral(struct usb_otg *otg, |
| struct usb_gadget *gadget) |
| { |
| struct msm_otg *motg = container_of(otg->phy, struct msm_otg, phy); |
| |
| /* |
| * Fail peripheral registration if this board can support |
| * only host configuration. |
| */ |
| if (motg->pdata->mode == USB_HOST) { |
| dev_info(otg->phy->dev, "Peripheral mode is not supported\n"); |
| return -ENODEV; |
| } |
| |
| if (!gadget) { |
| if (otg->phy->state == OTG_STATE_B_PERIPHERAL) { |
| pm_runtime_get_sync(otg->phy->dev); |
| msm_otg_start_peripheral(otg, 0); |
| otg->gadget = NULL; |
| otg->phy->state = OTG_STATE_UNDEFINED; |
| queue_work(system_nrt_wq, &motg->sm_work); |
| } else { |
| otg->gadget = NULL; |
| } |
| |
| return 0; |
| } |
| otg->gadget = gadget; |
| dev_dbg(otg->phy->dev, "peripheral driver registered w/ tranceiver\n"); |
| |
| /* |
| * Kick the state machine work, if host is not supported |
| * or host is already registered with us. |
| */ |
| if (motg->pdata->mode == USB_PERIPHERAL || otg->host) { |
| pm_runtime_get_sync(otg->phy->dev); |
| queue_work(system_nrt_wq, &motg->sm_work); |
| } |
| |
| return 0; |
| } |
| |
| static bool msm_otg_read_pmic_id_state(struct msm_otg *motg) |
| { |
| unsigned long flags; |
| int id; |
| |
| if (!motg->pdata->pmic_id_irq) |
| return -ENODEV; |
| |
| local_irq_save(flags); |
| id = irq_read_line(motg->pdata->pmic_id_irq); |
| local_irq_restore(flags); |
| |
| /* |
| * If we can not read ID line state for some reason, treat |
| * it as float. This would prevent MHL discovery and kicking |
| * host mode unnecessarily. |
| */ |
| return !!id; |
| } |
| |
| static int msm_otg_mhl_register_callback(struct msm_otg *motg, |
| void (*callback)(int on)) |
| { |
| struct usb_phy *phy = &motg->phy; |
| int ret; |
| |
| if (!motg->pdata->mhl_enable) { |
| dev_dbg(phy->dev, "MHL feature not enabled\n"); |
| return -ENODEV; |
| } |
| |
| if (motg->pdata->otg_control != OTG_PMIC_CONTROL || |
| !motg->pdata->pmic_id_irq) { |
| dev_dbg(phy->dev, "MHL can not be supported without PMIC Id\n"); |
| return -ENODEV; |
| } |
| |
| if (!motg->pdata->mhl_dev_name) { |
| dev_dbg(phy->dev, "MHL device name does not exist.\n"); |
| return -ENODEV; |
| } |
| |
| if (callback) |
| ret = mhl_register_callback(motg->pdata->mhl_dev_name, |
| callback); |
| else |
| ret = mhl_unregister_callback(motg->pdata->mhl_dev_name); |
| |
| if (ret) |
| dev_dbg(phy->dev, "mhl_register_callback(%s) return error=%d\n", |
| motg->pdata->mhl_dev_name, ret); |
| else |
| motg->mhl_enabled = true; |
| |
| return ret; |
| } |
| |
| static void msm_otg_mhl_notify_online(int on) |
| { |
| struct msm_otg *motg = the_msm_otg; |
| struct usb_phy *phy = &motg->phy; |
| bool queue = false; |
| |
| dev_dbg(phy->dev, "notify MHL %s%s\n", on ? "" : "dis", "connected"); |
| |
| if (on) { |
| set_bit(MHL, &motg->inputs); |
| } else { |
| clear_bit(MHL, &motg->inputs); |
| queue = true; |
| } |
| |
| if (queue && phy->state != OTG_STATE_UNDEFINED) |
| schedule_work(&motg->sm_work); |
| } |
| |
| static bool msm_otg_is_mhl(struct msm_otg *motg) |
| { |
| struct usb_phy *phy = &motg->phy; |
| int is_mhl, ret; |
| |
| ret = mhl_device_discovery(motg->pdata->mhl_dev_name, &is_mhl); |
| if (ret || is_mhl != MHL_DISCOVERY_RESULT_MHL) { |
| /* |
| * MHL driver calls our callback saying that MHL connected |
| * if RID_GND is detected. But at later part of discovery |
| * it may figure out MHL is not connected and returns |
| * false. Hence clear MHL input here. |
| */ |
| clear_bit(MHL, &motg->inputs); |
| dev_dbg(phy->dev, "MHL device not found\n"); |
| return false; |
| } |
| |
| set_bit(MHL, &motg->inputs); |
| dev_dbg(phy->dev, "MHL device found\n"); |
| return true; |
| } |
| |
| static bool msm_chg_mhl_detect(struct msm_otg *motg) |
| { |
| bool ret, id; |
| |
| if (!motg->mhl_enabled) |
| return false; |
| |
| id = msm_otg_read_pmic_id_state(motg); |
| |
| if (id) |
| return false; |
| |
| mhl_det_in_progress = true; |
| ret = msm_otg_is_mhl(motg); |
| mhl_det_in_progress = false; |
| |
| return ret; |
| } |
| |
| static void msm_otg_chg_check_timer_func(unsigned long data) |
| { |
| struct msm_otg *motg = (struct msm_otg *) data; |
| struct usb_otg *otg = motg->phy.otg; |
| |
| if (atomic_read(&motg->in_lpm) || |
| !test_bit(B_SESS_VLD, &motg->inputs) || |
| otg->phy->state != OTG_STATE_B_PERIPHERAL || |
| otg->gadget->speed != USB_SPEED_UNKNOWN) { |
| dev_dbg(otg->phy->dev, "Nothing to do in chg_check_timer\n"); |
| return; |
| } |
| |
| if ((readl_relaxed(USB_PORTSC) & PORTSC_LS) == PORTSC_LS) { |
| dev_dbg(otg->phy->dev, "DCP is detected as SDP\n"); |
| set_bit(B_FALSE_SDP, &motg->inputs); |
| queue_work(system_nrt_wq, &motg->sm_work); |
| } |
| } |
| |
| static bool msm_chg_aca_detect(struct msm_otg *motg) |
| { |
| struct usb_phy *phy = &motg->phy; |
| u32 int_sts; |
| bool ret = false; |
| |
| if (!aca_enabled()) |
| goto out; |
| |
| if (motg->pdata->phy_type == CI_45NM_INTEGRATED_PHY) |
| goto out; |
| |
| int_sts = ulpi_read(phy, 0x87); |
| switch (int_sts & 0x1C) { |
| case 0x08: |
| if (!test_and_set_bit(ID_A, &motg->inputs)) { |
| dev_dbg(phy->dev, "ID_A\n"); |
| motg->chg_type = USB_ACA_A_CHARGER; |
| motg->chg_state = USB_CHG_STATE_DETECTED; |
| clear_bit(ID_B, &motg->inputs); |
| clear_bit(ID_C, &motg->inputs); |
| set_bit(ID, &motg->inputs); |
| ret = true; |
| } |
| break; |
| case 0x0C: |
| if (!test_and_set_bit(ID_B, &motg->inputs)) { |
| dev_dbg(phy->dev, "ID_B\n"); |
| motg->chg_type = USB_ACA_B_CHARGER; |
| motg->chg_state = USB_CHG_STATE_DETECTED; |
| clear_bit(ID_A, &motg->inputs); |
| clear_bit(ID_C, &motg->inputs); |
| set_bit(ID, &motg->inputs); |
| ret = true; |
| } |
| break; |
| case 0x10: |
| if (!test_and_set_bit(ID_C, &motg->inputs)) { |
| dev_dbg(phy->dev, "ID_C\n"); |
| motg->chg_type = USB_ACA_C_CHARGER; |
| motg->chg_state = USB_CHG_STATE_DETECTED; |
| clear_bit(ID_A, &motg->inputs); |
| clear_bit(ID_B, &motg->inputs); |
| set_bit(ID, &motg->inputs); |
| ret = true; |
| } |
| break; |
| case 0x04: |
| if (test_and_clear_bit(ID, &motg->inputs)) { |
| dev_dbg(phy->dev, "ID_GND\n"); |
| motg->chg_type = USB_INVALID_CHARGER; |
| motg->chg_state = USB_CHG_STATE_UNDEFINED; |
| clear_bit(ID_A, &motg->inputs); |
| clear_bit(ID_B, &motg->inputs); |
| clear_bit(ID_C, &motg->inputs); |
| ret = true; |
| } |
| break; |
| default: |
| ret = test_and_clear_bit(ID_A, &motg->inputs) | |
| test_and_clear_bit(ID_B, &motg->inputs) | |
| test_and_clear_bit(ID_C, &motg->inputs) | |
| !test_and_set_bit(ID, &motg->inputs); |
| if (ret) { |
| dev_dbg(phy->dev, "ID A/B/C/GND is no more\n"); |
| motg->chg_type = USB_INVALID_CHARGER; |
| motg->chg_state = USB_CHG_STATE_UNDEFINED; |
| } |
| } |
| out: |
| return ret; |
| } |
| |
| static void msm_chg_enable_aca_det(struct msm_otg *motg) |
| { |
| struct usb_phy *phy = &motg->phy; |
| |
| if (!aca_enabled()) |
| return; |
| |
| switch (motg->pdata->phy_type) { |
| case SNPS_28NM_INTEGRATED_PHY: |
| /* Disable ID_GND in link and PHY */ |
| writel_relaxed(readl_relaxed(USB_OTGSC) & ~(OTGSC_IDPU | |
| OTGSC_IDIE), USB_OTGSC); |
| ulpi_write(phy, 0x01, 0x0C); |
| ulpi_write(phy, 0x10, 0x0F); |
| ulpi_write(phy, 0x10, 0x12); |
| /* Disable PMIC ID pull-up */ |
| pm8xxx_usb_id_pullup(0); |
| /* Enable ACA ID detection */ |
| ulpi_write(phy, 0x20, 0x85); |
| aca_id_turned_on = true; |
| break; |
| default: |
| break; |
| } |
| } |
| |
| static void msm_chg_enable_aca_intr(struct msm_otg *motg) |
| { |
| struct usb_phy *phy = &motg->phy; |
| |
| if (!aca_enabled()) |
| return; |
| |
| switch (motg->pdata->phy_type) { |
| case SNPS_28NM_INTEGRATED_PHY: |
| /* Enable ACA Detection interrupt (on any RID change) */ |
| ulpi_write(phy, 0x01, 0x94); |
| break; |
| default: |
| break; |
| } |
| } |
| |
| static void msm_chg_disable_aca_intr(struct msm_otg *motg) |
| { |
| struct usb_phy *phy = &motg->phy; |
| |
| if (!aca_enabled()) |
| return; |
| |
| switch (motg->pdata->phy_type) { |
| case SNPS_28NM_INTEGRATED_PHY: |
| ulpi_write(phy, 0x01, 0x95); |
| break; |
| default: |
| break; |
| } |
| } |
| |
| static bool msm_chg_check_aca_intr(struct msm_otg *motg) |
| { |
| struct usb_phy *phy = &motg->phy; |
| bool ret = false; |
| |
| if (!aca_enabled()) |
| return ret; |
| |
| switch (motg->pdata->phy_type) { |
| case SNPS_28NM_INTEGRATED_PHY: |
| if (ulpi_read(phy, 0x91) & 1) { |
| dev_dbg(phy->dev, "RID change\n"); |
| ulpi_write(phy, 0x01, 0x92); |
| ret = msm_chg_aca_detect(motg); |
| } |
| default: |
| break; |
| } |
| return ret; |
| } |
| |
| static void msm_otg_id_timer_func(unsigned long data) |
| { |
| struct msm_otg *motg = (struct msm_otg *) data; |
| |
| if (!aca_enabled()) |
| return; |
| |
| if (atomic_read(&motg->in_lpm)) { |
| dev_dbg(motg->phy.dev, "timer: in lpm\n"); |
| return; |
| } |
| |
| if (motg->phy.state == OTG_STATE_A_SUSPEND) |
| goto out; |
| |
| if (msm_chg_check_aca_intr(motg)) { |
| dev_dbg(motg->phy.dev, "timer: aca work\n"); |
| queue_work(system_nrt_wq, &motg->sm_work); |
| } |
| |
| out: |
| if (!test_bit(ID, &motg->inputs) || test_bit(ID_A, &motg->inputs)) |
| mod_timer(&motg->id_timer, ID_TIMER_FREQ); |
| } |
| |
| static bool msm_chg_check_secondary_det(struct msm_otg *motg) |
| { |
| struct usb_phy *phy = &motg->phy; |
| u32 chg_det; |
| bool ret = false; |
| |
| switch (motg->pdata->phy_type) { |
| case CI_45NM_INTEGRATED_PHY: |
| chg_det = ulpi_read(phy, 0x34); |
| ret = chg_det & (1 << 4); |
| break; |
| case SNPS_28NM_INTEGRATED_PHY: |
| chg_det = ulpi_read(phy, 0x87); |
| ret = chg_det & 1; |
| break; |
| default: |
| break; |
| } |
| return ret; |
| } |
| |
| static void msm_chg_enable_secondary_det(struct msm_otg *motg) |
| { |
| struct usb_phy *phy = &motg->phy; |
| u32 chg_det; |
| |
| switch (motg->pdata->phy_type) { |
| case CI_45NM_INTEGRATED_PHY: |
| chg_det = ulpi_read(phy, 0x34); |
| /* Turn off charger block */ |
| chg_det |= ~(1 << 1); |
| ulpi_write(phy, chg_det, 0x34); |
| udelay(20); |
| /* control chg block via ULPI */ |
| chg_det &= ~(1 << 3); |
| ulpi_write(phy, chg_det, 0x34); |
| /* put it in host mode for enabling D- source */ |
| chg_det &= ~(1 << 2); |
| ulpi_write(phy, chg_det, 0x34); |
| /* Turn on chg detect block */ |
| chg_det &= ~(1 << 1); |
| ulpi_write(phy, chg_det, 0x34); |
| udelay(20); |
| /* enable chg detection */ |
| chg_det &= ~(1 << 0); |
| ulpi_write(phy, chg_det, 0x34); |
| break; |
| case SNPS_28NM_INTEGRATED_PHY: |
| /* |
| * Configure DM as current source, DP as current sink |
| * and enable battery charging comparators. |
| */ |
| ulpi_write(phy, 0x8, 0x85); |
| ulpi_write(phy, 0x2, 0x85); |
| ulpi_write(phy, 0x1, 0x85); |
| break; |
| default: |
| break; |
| } |
| } |
| |
| static bool msm_chg_check_primary_det(struct msm_otg *motg) |
| { |
| struct usb_phy *phy = &motg->phy; |
| u32 chg_det; |
| bool ret = false; |
| |
| switch (motg->pdata->phy_type) { |
| case CI_45NM_INTEGRATED_PHY: |
| chg_det = ulpi_read(phy, 0x34); |
| ret = chg_det & (1 << 4); |
| break; |
| case SNPS_28NM_INTEGRATED_PHY: |
| chg_det = ulpi_read(phy, 0x87); |
| ret = chg_det & 1; |
| /* Turn off VDP_SRC */ |
| ulpi_write(phy, 0x3, 0x86); |
| msleep(20); |
| break; |
| default: |
| break; |
| } |
| return ret; |
| } |
| |
| static void msm_chg_enable_primary_det(struct msm_otg *motg) |
| { |
| struct usb_phy *phy = &motg->phy; |
| u32 chg_det; |
| |
| switch (motg->pdata->phy_type) { |
| case CI_45NM_INTEGRATED_PHY: |
| chg_det = ulpi_read(phy, 0x34); |
| /* enable chg detection */ |
| chg_det &= ~(1 << 0); |
| ulpi_write(phy, chg_det, 0x34); |
| break; |
| case SNPS_28NM_INTEGRATED_PHY: |
| /* |
| * Configure DP as current source, DM as current sink |
| * and enable battery charging comparators. |
| */ |
| ulpi_write(phy, 0x2, 0x85); |
| ulpi_write(phy, 0x1, 0x85); |
| break; |
| default: |
| break; |
| } |
| } |
| |
| static bool msm_chg_check_dcd(struct msm_otg *motg) |
| { |
| struct usb_phy *phy = &motg->phy; |
| u32 line_state; |
| bool ret = false; |
| |
| switch (motg->pdata->phy_type) { |
| case CI_45NM_INTEGRATED_PHY: |
| line_state = ulpi_read(phy, 0x15); |
| ret = !(line_state & 1); |
| break; |
| case SNPS_28NM_INTEGRATED_PHY: |
| line_state = ulpi_read(phy, 0x87); |
| ret = line_state & 2; |
| break; |
| default: |
| break; |
| } |
| return ret; |
| } |
| |
| static void msm_chg_disable_dcd(struct msm_otg *motg) |
| { |
| struct usb_phy *phy = &motg->phy; |
| u32 chg_det; |
| |
| switch (motg->pdata->phy_type) { |
| case CI_45NM_INTEGRATED_PHY: |
| chg_det = ulpi_read(phy, 0x34); |
| chg_det &= ~(1 << 5); |
| ulpi_write(phy, chg_det, 0x34); |
| break; |
| case SNPS_28NM_INTEGRATED_PHY: |
| ulpi_write(phy, 0x10, 0x86); |
| break; |
| default: |
| break; |
| } |
| } |
| |
| static void msm_chg_enable_dcd(struct msm_otg *motg) |
| { |
| struct usb_phy *phy = &motg->phy; |
| u32 chg_det; |
| |
| switch (motg->pdata->phy_type) { |
| case CI_45NM_INTEGRATED_PHY: |
| chg_det = ulpi_read(phy, 0x34); |
| /* Turn on D+ current source */ |
| chg_det |= (1 << 5); |
| ulpi_write(phy, chg_det, 0x34); |
| break; |
| case SNPS_28NM_INTEGRATED_PHY: |
| /* Data contact detection enable */ |
| ulpi_write(phy, 0x10, 0x85); |
| break; |
| default: |
| break; |
| } |
| } |
| |
| static void msm_chg_block_on(struct msm_otg *motg) |
| { |
| struct usb_phy *phy = &motg->phy; |
| u32 func_ctrl, chg_det; |
| |
| /* put the controller in non-driving mode */ |
| func_ctrl = ulpi_read(phy, ULPI_FUNC_CTRL); |
| func_ctrl &= ~ULPI_FUNC_CTRL_OPMODE_MASK; |
| func_ctrl |= ULPI_FUNC_CTRL_OPMODE_NONDRIVING; |
| ulpi_write(phy, func_ctrl, ULPI_FUNC_CTRL); |
| |
| switch (motg->pdata->phy_type) { |
| case CI_45NM_INTEGRATED_PHY: |
| chg_det = ulpi_read(phy, 0x34); |
| /* control chg block via ULPI */ |
| chg_det &= ~(1 << 3); |
| ulpi_write(phy, chg_det, 0x34); |
| /* Turn on chg detect block */ |
| chg_det &= ~(1 << 1); |
| ulpi_write(phy, chg_det, 0x34); |
| udelay(20); |
| break; |
| case SNPS_28NM_INTEGRATED_PHY: |
| /* disable DP and DM pull down resistors */ |
| ulpi_write(phy, 0x6, 0xC); |
| /* Clear charger detecting control bits */ |
| ulpi_write(phy, 0x1F, 0x86); |
| /* Clear alt interrupt latch and enable bits */ |
| ulpi_write(phy, 0x1F, 0x92); |
| ulpi_write(phy, 0x1F, 0x95); |
| udelay(100); |
| break; |
| default: |
| break; |
| } |
| } |
| |
| static void msm_chg_block_off(struct msm_otg *motg) |
| { |
| struct usb_phy *phy = &motg->phy; |
| u32 func_ctrl, chg_det; |
| |
| switch (motg->pdata->phy_type) { |
| case CI_45NM_INTEGRATED_PHY: |
| chg_det = ulpi_read(phy, 0x34); |
| /* Turn off charger block */ |
| chg_det |= ~(1 << 1); |
| ulpi_write(phy, chg_det, 0x34); |
| break; |
| case SNPS_28NM_INTEGRATED_PHY: |
| /* Clear charger detecting control bits */ |
| ulpi_write(phy, 0x3F, 0x86); |
| /* Clear alt interrupt latch and enable bits */ |
| ulpi_write(phy, 0x1F, 0x92); |
| ulpi_write(phy, 0x1F, 0x95); |
| break; |
| default: |
| break; |
| } |
| |
| /* put the controller in normal mode */ |
| func_ctrl = ulpi_read(phy, ULPI_FUNC_CTRL); |
| func_ctrl &= ~ULPI_FUNC_CTRL_OPMODE_MASK; |
| func_ctrl |= ULPI_FUNC_CTRL_OPMODE_NORMAL; |
| ulpi_write(phy, func_ctrl, ULPI_FUNC_CTRL); |
| } |
| |
| static const char *chg_to_string(enum usb_chg_type chg_type) |
| { |
| switch (chg_type) { |
| case USB_SDP_CHARGER: return "USB_SDP_CHARGER"; |
| case USB_DCP_CHARGER: return "USB_DCP_CHARGER"; |
| case USB_CDP_CHARGER: return "USB_CDP_CHARGER"; |
| case USB_ACA_A_CHARGER: return "USB_ACA_A_CHARGER"; |
| case USB_ACA_B_CHARGER: return "USB_ACA_B_CHARGER"; |
| case USB_ACA_C_CHARGER: return "USB_ACA_C_CHARGER"; |
| case USB_ACA_DOCK_CHARGER: return "USB_ACA_DOCK_CHARGER"; |
| case USB_PROPRIETARY_CHARGER: return "USB_PROPRIETARY_CHARGER"; |
| default: return "INVALID_CHARGER"; |
| } |
| } |
| |
| #define MSM_CHG_DCD_TIMEOUT (750 * HZ/1000) /* 750 msec */ |
| #define MSM_CHG_DCD_POLL_TIME (50 * HZ/1000) /* 50 msec */ |
| #define MSM_CHG_PRIMARY_DET_TIME (50 * HZ/1000) /* TVDPSRC_ON */ |
| #define MSM_CHG_SECONDARY_DET_TIME (50 * HZ/1000) /* TVDMSRC_ON */ |
| static void msm_chg_detect_work(struct work_struct *w) |
| { |
| struct msm_otg *motg = container_of(w, struct msm_otg, chg_work.work); |
| struct usb_phy *phy = &motg->phy; |
| bool is_dcd = false, tmout, vout, is_aca; |
| u32 line_state, dm_vlgc; |
| unsigned long delay; |
| |
| dev_dbg(phy->dev, "chg detection work\n"); |
| |
| if (test_bit(MHL, &motg->inputs)) { |
| dev_dbg(phy->dev, "detected MHL, escape chg detection work\n"); |
| return; |
| } |
| |
| switch (motg->chg_state) { |
| case USB_CHG_STATE_UNDEFINED: |
| msm_chg_block_on(motg); |
| msm_chg_enable_dcd(motg); |
| msm_chg_enable_aca_det(motg); |
| motg->chg_state = USB_CHG_STATE_WAIT_FOR_DCD; |
| motg->dcd_time = 0; |
| delay = MSM_CHG_DCD_POLL_TIME; |
| break; |
| case USB_CHG_STATE_WAIT_FOR_DCD: |
| if (msm_chg_mhl_detect(motg)) { |
| msm_chg_block_off(motg); |
| motg->chg_state = USB_CHG_STATE_DETECTED; |
| motg->chg_type = USB_INVALID_CHARGER; |
| queue_work(system_nrt_wq, &motg->sm_work); |
| return; |
| } |
| is_aca = msm_chg_aca_detect(motg); |
| if (is_aca) { |
| /* |
| * ID_A can be ACA dock too. continue |
| * primary detection after DCD. |
| */ |
| if (test_bit(ID_A, &motg->inputs)) { |
| motg->chg_state = USB_CHG_STATE_WAIT_FOR_DCD; |
| } else { |
| delay = 0; |
| break; |
| } |
| } |
| is_dcd = msm_chg_check_dcd(motg); |
| motg->dcd_time += MSM_CHG_DCD_POLL_TIME; |
| tmout = motg->dcd_time >= MSM_CHG_DCD_TIMEOUT; |
| if (is_dcd || tmout) { |
| msm_chg_disable_dcd(motg); |
| msm_chg_enable_primary_det(motg); |
| delay = MSM_CHG_PRIMARY_DET_TIME; |
| motg->chg_state = USB_CHG_STATE_DCD_DONE; |
| } else { |
| delay = MSM_CHG_DCD_POLL_TIME; |
| } |
| break; |
| case USB_CHG_STATE_DCD_DONE: |
| vout = msm_chg_check_primary_det(motg); |
| line_state = readl_relaxed(USB_PORTSC) & PORTSC_LS; |
| dm_vlgc = line_state & PORTSC_LS_DM; |
| if (vout && !dm_vlgc) { /* VDAT_REF < DM < VLGC */ |
| if (test_bit(ID_A, &motg->inputs)) { |
| motg->chg_type = USB_ACA_DOCK_CHARGER; |
| motg->chg_state = USB_CHG_STATE_DETECTED; |
| delay = 0; |
| break; |
| } |
| if (line_state) { /* DP > VLGC */ |
| motg->chg_type = USB_PROPRIETARY_CHARGER; |
| motg->chg_state = USB_CHG_STATE_DETECTED; |
| delay = 0; |
| } else { |
| msm_chg_enable_secondary_det(motg); |
| delay = MSM_CHG_SECONDARY_DET_TIME; |
| motg->chg_state = USB_CHG_STATE_PRIMARY_DONE; |
| } |
| } else { /* DM < VDAT_REF || DM > VLGC */ |
| if (test_bit(ID_A, &motg->inputs)) { |
| motg->chg_type = USB_ACA_A_CHARGER; |
| motg->chg_state = USB_CHG_STATE_DETECTED; |
| delay = 0; |
| break; |
| } |
| |
| if (line_state) /* DP > VLGC or/and DM > VLGC */ |
| motg->chg_type = USB_PROPRIETARY_CHARGER; |
| else |
| motg->chg_type = USB_SDP_CHARGER; |
| |
| motg->chg_state = USB_CHG_STATE_DETECTED; |
| delay = 0; |
| } |
| break; |
| case USB_CHG_STATE_PRIMARY_DONE: |
| vout = msm_chg_check_secondary_det(motg); |
| if (vout) |
| motg->chg_type = USB_DCP_CHARGER; |
| else |
| motg->chg_type = USB_CDP_CHARGER; |
| motg->chg_state = USB_CHG_STATE_SECONDARY_DONE; |
| /* fall through */ |
| case USB_CHG_STATE_SECONDARY_DONE: |
| motg->chg_state = USB_CHG_STATE_DETECTED; |
| case USB_CHG_STATE_DETECTED: |
| /* |
| * Notify the charger type to power supply |
| * owner as soon as we determine the charger. |
| */ |
| msm_otg_notify_chg_type(motg); |
| msm_chg_block_off(motg); |
| msm_chg_enable_aca_det(motg); |
| /* |
| * Spurious interrupt is seen after enabling ACA detection |
| * due to which charger detection fails in case of PET. |
| * Add delay of 100 microsec to avoid that. |
| */ |
| udelay(100); |
| msm_chg_enable_aca_intr(motg); |
| dev_dbg(phy->dev, "chg_type = %s\n", |
| chg_to_string(motg->chg_type)); |
| queue_work(system_nrt_wq, &motg->sm_work); |
| return; |
| default: |
| return; |
| } |
| |
| queue_delayed_work(system_nrt_wq, &motg->chg_work, delay); |
| } |
| |
| /* |
| * We support OTG, Peripheral only and Host only configurations. In case |
| * of OTG, mode switch (host-->peripheral/peripheral-->host) can happen |
| * via Id pin status or user request (debugfs). Id/BSV interrupts are not |
| * enabled when switch is controlled by user and default mode is supplied |
| * by board file, which can be changed by userspace later. |
| */ |
| static void msm_otg_init_sm(struct msm_otg *motg) |
| { |
| struct msm_otg_platform_data *pdata = motg->pdata; |
| u32 otgsc = readl(USB_OTGSC); |
| |
| switch (pdata->mode) { |
| case USB_OTG: |
| if (pdata->otg_control == OTG_USER_CONTROL) { |
| if (pdata->default_mode == USB_HOST) { |
| clear_bit(ID, &motg->inputs); |
| } else if (pdata->default_mode == USB_PERIPHERAL) { |
| set_bit(ID, &motg->inputs); |
| set_bit(B_SESS_VLD, &motg->inputs); |
| } else { |
| set_bit(ID, &motg->inputs); |
| clear_bit(B_SESS_VLD, &motg->inputs); |
| } |
| } else if (pdata->otg_control == OTG_PHY_CONTROL) { |
| if (otgsc & OTGSC_ID) { |
| set_bit(ID, &motg->inputs); |
| } else { |
| clear_bit(ID, &motg->inputs); |
| set_bit(A_BUS_REQ, &motg->inputs); |
| } |
| if (otgsc & OTGSC_BSV) |
| set_bit(B_SESS_VLD, &motg->inputs); |
| else |
| clear_bit(B_SESS_VLD, &motg->inputs); |
| } else if (pdata->otg_control == OTG_PMIC_CONTROL) { |
| if (pdata->pmic_id_irq) { |
| if (msm_otg_read_pmic_id_state(motg)) |
| set_bit(ID, &motg->inputs); |
| else |
| clear_bit(ID, &motg->inputs); |
| } |
| /* |
| * VBUS initial state is reported after PMIC |
| * driver initialization. Wait for it. |
| */ |
| wait_for_completion(&pmic_vbus_init); |
| } |
| break; |
| case USB_HOST: |
| clear_bit(ID, &motg->inputs); |
| break; |
| case USB_PERIPHERAL: |
| set_bit(ID, &motg->inputs); |
| if (pdata->otg_control == OTG_PHY_CONTROL) { |
| if (otgsc & OTGSC_BSV) |
| set_bit(B_SESS_VLD, &motg->inputs); |
| else |
| clear_bit(B_SESS_VLD, &motg->inputs); |
| } else if (pdata->otg_control == OTG_PMIC_CONTROL) { |
| /* |
| * VBUS initial state is reported after PMIC |
| * driver initialization. Wait for it. |
| */ |
| wait_for_completion(&pmic_vbus_init); |
| } |
| break; |
| default: |
| break; |
| } |
| } |
| |
| static void msm_otg_sm_work(struct work_struct *w) |
| { |
| struct msm_otg *motg = container_of(w, struct msm_otg, sm_work); |
| struct usb_otg *otg = motg->phy.otg; |
| bool work = 0, srp_reqd; |
| |
| pm_runtime_resume(otg->phy->dev); |
| pr_debug("%s work\n", otg_state_string(otg->phy->state)); |
| switch (otg->phy->state) { |
| case OTG_STATE_UNDEFINED: |
| msm_otg_reset(otg->phy); |
| msm_otg_init_sm(motg); |
| if (!psy && legacy_power_supply) { |
| psy = power_supply_get_by_name("usb"); |
| |
| if (!psy) |
| pr_err("couldn't get usb power supply\n"); |
| } |
| |
| otg->phy->state = OTG_STATE_B_IDLE; |
| if (!test_bit(B_SESS_VLD, &motg->inputs) && |
| test_bit(ID, &motg->inputs)) { |
| pm_runtime_put_noidle(otg->phy->dev); |
| pm_runtime_suspend(otg->phy->dev); |
| break; |
| } |
| /* FALL THROUGH */ |
| case OTG_STATE_B_IDLE: |
| if (test_bit(MHL, &motg->inputs)) { |
| /* allow LPM */ |
| pm_runtime_put_noidle(otg->phy->dev); |
| pm_runtime_suspend(otg->phy->dev); |
| } else if ((!test_bit(ID, &motg->inputs) || |
| test_bit(ID_A, &motg->inputs)) && otg->host) { |
| pr_debug("!id || id_A\n"); |
| if (msm_chg_mhl_detect(motg)) { |
| work = 1; |
| break; |
| } |
| clear_bit(B_BUS_REQ, &motg->inputs); |
| set_bit(A_BUS_REQ, &motg->inputs); |
| otg->phy->state = OTG_STATE_A_IDLE; |
| work = 1; |
| } else if (test_bit(B_SESS_VLD, &motg->inputs)) { |
| pr_debug("b_sess_vld\n"); |
| switch (motg->chg_state) { |
| case USB_CHG_STATE_UNDEFINED: |
| msm_chg_detect_work(&motg->chg_work.work); |
| break; |
| case USB_CHG_STATE_DETECTED: |
| switch (motg->chg_type) { |
| case USB_DCP_CHARGER: |
| /* Enable VDP_SRC */ |
| ulpi_write(otg->phy, 0x2, 0x85); |
| /* fall through */ |
| case USB_PROPRIETARY_CHARGER: |
| msm_otg_notify_charger(motg, |
| IDEV_CHG_MAX); |
| pm_runtime_put_noidle(otg->phy->dev); |
| pm_runtime_suspend(otg->phy->dev); |
| break; |
| case USB_ACA_B_CHARGER: |
| msm_otg_notify_charger(motg, |
| IDEV_ACA_CHG_MAX); |
| /* |
| * (ID_B --> ID_C) PHY_ALT interrupt can |
| * not be detected in LPM. |
| */ |
| break; |
| case USB_CDP_CHARGER: |
| msm_otg_notify_charger(motg, |
| IDEV_CHG_MAX); |
| msm_otg_start_peripheral(otg, 1); |
| otg->phy->state = |
| OTG_STATE_B_PERIPHERAL; |
| break; |
| case USB_ACA_C_CHARGER: |
| msm_otg_notify_charger(motg, |
| IDEV_ACA_CHG_MAX); |
| msm_otg_start_peripheral(otg, 1); |
| otg->phy->state = |
| OTG_STATE_B_PERIPHERAL; |
| break; |
| case USB_SDP_CHARGER: |
| msm_otg_start_peripheral(otg, 1); |
| otg->phy->state = |
| OTG_STATE_B_PERIPHERAL; |
| mod_timer(&motg->chg_check_timer, |
| CHG_RECHECK_DELAY); |
| break; |
| default: |
| break; |
| } |
| break; |
| default: |
| break; |
| } |
| } else if (test_bit(B_BUS_REQ, &motg->inputs)) { |
| pr_debug("b_sess_end && b_bus_req\n"); |
| if (msm_otg_start_srp(otg) < 0) { |
| clear_bit(B_BUS_REQ, &motg->inputs); |
| work = 1; |
| break; |
| } |
| otg->phy->state = OTG_STATE_B_SRP_INIT; |
| msm_otg_start_timer(motg, TB_SRP_FAIL, B_SRP_FAIL); |
| break; |
| } else { |
| pr_debug("chg_work cancel"); |
| del_timer_sync(&motg->chg_check_timer); |
| clear_bit(B_FALSE_SDP, &motg->inputs); |
| clear_bit(A_BUS_REQ, &motg->inputs); |
| cancel_delayed_work_sync(&motg->chg_work); |
| motg->chg_state = USB_CHG_STATE_UNDEFINED; |
| motg->chg_type = USB_INVALID_CHARGER; |
| msm_otg_notify_charger(motg, 0); |
| msm_otg_reset(otg->phy); |
| /* |
| * There is a small window where ID interrupt |
| * is not monitored during ID detection circuit |
| * switch from ACA to PMIC. Check ID state |
| * before entering into low power mode. |
| */ |
| if (!msm_otg_read_pmic_id_state(motg)) { |
| pr_debug("process missed ID intr\n"); |
| clear_bit(ID, &motg->inputs); |
| work = 1; |
| break; |
| } |
| pm_runtime_put_noidle(otg->phy->dev); |
| /* |
| * Only if autosuspend was enabled in probe, it will be |
| * used here. Otherwise, no delay will be used. |
| */ |
| pm_runtime_mark_last_busy(otg->phy->dev); |
| pm_runtime_autosuspend(otg->phy->dev); |
| } |
| break; |
| case OTG_STATE_B_SRP_INIT: |
| if (!test_bit(ID, &motg->inputs) || |
| test_bit(ID_A, &motg->inputs) || |
| test_bit(ID_C, &motg->inputs) || |
| (test_bit(B_SESS_VLD, &motg->inputs) && |
| !test_bit(ID_B, &motg->inputs))) { |
| pr_debug("!id || id_a/c || b_sess_vld+!id_b\n"); |
| msm_otg_del_timer(motg); |
| otg->phy->state = OTG_STATE_B_IDLE; |
| /* |
| * clear VBUSVLDEXTSEL and VBUSVLDEXT register |
| * bits after SRP initiation. |
| */ |
| ulpi_write(otg->phy, 0x0, 0x98); |
| work = 1; |
| } else if (test_bit(B_SRP_FAIL, &motg->tmouts)) { |
| pr_debug("b_srp_fail\n"); |
| pr_info("A-device did not respond to SRP\n"); |
| clear_bit(B_BUS_REQ, &motg->inputs); |
| clear_bit(B_SRP_FAIL, &motg->tmouts); |
| otg_send_event(OTG_EVENT_NO_RESP_FOR_SRP); |
| ulpi_write(otg->phy, 0x0, 0x98); |
| otg->phy->state = OTG_STATE_B_IDLE; |
| motg->b_last_se0_sess = jiffies; |
| work = 1; |
| } |
| break; |
| case OTG_STATE_B_PERIPHERAL: |
| if (test_bit(B_SESS_VLD, &motg->inputs) && |
| test_bit(B_FALSE_SDP, &motg->inputs)) { |
| pr_debug("B_FALSE_SDP\n"); |
| msm_otg_start_peripheral(otg, 0); |
| motg->chg_type = USB_DCP_CHARGER; |
| clear_bit(B_FALSE_SDP, &motg->inputs); |
| otg->phy->state = OTG_STATE_B_IDLE; |
| work = 1; |
| } else if (!test_bit(ID, &motg->inputs) || |
| test_bit(ID_A, &motg->inputs) || |
| test_bit(ID_B, &motg->inputs) || |
| !test_bit(B_SESS_VLD, &motg->inputs)) { |
| pr_debug("!id || id_a/b || !b_sess_vld\n"); |
| motg->chg_state = USB_CHG_STATE_UNDEFINED; |
| motg->chg_type = USB_INVALID_CHARGER; |
| msm_otg_notify_charger(motg, 0); |
| srp_reqd = otg->gadget->otg_srp_reqd; |
| msm_otg_start_peripheral(otg, 0); |
| if (test_bit(ID_B, &motg->inputs)) |
| clear_bit(ID_B, &motg->inputs); |
| clear_bit(B_BUS_REQ, &motg->inputs); |
| otg->phy->state = OTG_STATE_B_IDLE; |
| motg->b_last_se0_sess = jiffies; |
| if (srp_reqd) |
| msm_otg_start_timer(motg, |
| TB_TST_SRP, B_TST_SRP); |
| else |
| work = 1; |
| } else if (test_bit(B_BUS_REQ, &motg->inputs) && |
| otg->gadget->b_hnp_enable && |
| test_bit(A_BUS_SUSPEND, &motg->inputs)) { |
| pr_debug("b_bus_req && b_hnp_en && a_bus_suspend\n"); |
| msm_otg_start_timer(motg, TB_ASE0_BRST, B_ASE0_BRST); |
| /* D+ pullup should not be disconnected within 4msec |
| * after A device suspends the bus. Otherwise PET will |
| * fail the compliance test. |
| */ |
| udelay(1000); |
| msm_otg_start_peripheral(otg, 0); |
| otg->phy->state = OTG_STATE_B_WAIT_ACON; |
| /* |
| * start HCD even before A-device enable |
| * pull-up to meet HNP timings. |
| */ |
| otg->host->is_b_host = 1; |
| msm_otg_start_host(otg, 1); |
| } else if (test_bit(A_BUS_SUSPEND, &motg->inputs) && |
| test_bit(B_SESS_VLD, &motg->inputs)) { |
| pr_debug("a_bus_suspend && b_sess_vld\n"); |
| if (motg->caps & ALLOW_LPM_ON_DEV_SUSPEND) { |
| pm_runtime_put_noidle(otg->phy->dev); |
| pm_runtime_suspend(otg->phy->dev); |
| } |
| } else if (test_bit(ID_C, &motg->inputs)) { |
| msm_otg_notify_charger(motg, IDEV_ACA_CHG_MAX); |
| } |
| break; |
| case OTG_STATE_B_WAIT_ACON: |
| if (!test_bit(ID, &motg->inputs) || |
| test_bit(ID_A, &motg->inputs) || |
| test_bit(ID_B, &motg->inputs) || |
| !test_bit(B_SESS_VLD, &motg->inputs)) { |
| pr_debug("!id || id_a/b || !b_sess_vld\n"); |
| msm_otg_del_timer(motg); |
| /* |
| * A-device is physically disconnected during |
| * HNP. Remove HCD. |
| */ |
| msm_otg_start_host(otg, 0); |
| otg->host->is_b_host = 0; |
| |
| clear_bit(B_BUS_REQ, &motg->inputs); |
| clear_bit(A_BUS_SUSPEND, &motg->inputs); |
| motg->b_last_se0_sess = jiffies; |
| otg->phy->state = OTG_STATE_B_IDLE; |
| msm_otg_reset(otg->phy); |
| work = 1; |
| } else if (test_bit(A_CONN, &motg->inputs)) { |
| pr_debug("a_conn\n"); |
| clear_bit(A_BUS_SUSPEND, &motg->inputs); |
| otg->phy->state = OTG_STATE_B_HOST; |
| /* |
| * PET disconnects D+ pullup after reset is generated |
| * by B device in B_HOST role which is not detected by |
| * B device. As workaorund , start timer of 300msec |
| * and stop timer if A device is enumerated else clear |
| * A_CONN. |
| */ |
| msm_otg_start_timer(motg, TB_TST_CONFIG, |
| B_TST_CONFIG); |
| } else if (test_bit(B_ASE0_BRST, &motg->tmouts)) { |
| pr_debug("b_ase0_brst_tmout\n"); |
| pr_info("B HNP fail:No response from A device\n"); |
| msm_otg_start_host(otg, 0); |
| msm_otg_reset(otg->phy); |
| otg->host->is_b_host = 0; |
| clear_bit(B_ASE0_BRST, &motg->tmouts); |
| clear_bit(A_BUS_SUSPEND, &motg->inputs); |
| clear_bit(B_BUS_REQ, &motg->inputs); |
| otg_send_event(OTG_EVENT_HNP_FAILED); |
| otg->phy->state = OTG_STATE_B_IDLE; |
| work = 1; |
| } else if (test_bit(ID_C, &motg->inputs)) { |
| msm_otg_notify_charger(motg, IDEV_ACA_CHG_MAX); |
| } |
| break; |
| case OTG_STATE_B_HOST: |
| if (!test_bit(B_BUS_REQ, &motg->inputs) || |
| !test_bit(A_CONN, &motg->inputs) || |
| !test_bit(B_SESS_VLD, &motg->inputs)) { |
| pr_debug("!b_bus_req || !a_conn || !b_sess_vld\n"); |
| clear_bit(A_CONN, &motg->inputs); |
| clear_bit(B_BUS_REQ, &motg->inputs); |
| msm_otg_start_host(otg, 0); |
| otg->host->is_b_host = 0; |
| otg->phy->state = OTG_STATE_B_IDLE; |
| msm_otg_reset(otg->phy); |
| work = 1; |
| } else if (test_bit(ID_C, &motg->inputs)) { |
| msm_otg_notify_charger(motg, IDEV_ACA_CHG_MAX); |
| } |
| break; |
| case OTG_STATE_A_IDLE: |
| otg->default_a = 1; |
| if (test_bit(ID, &motg->inputs) && |
| !test_bit(ID_A, &motg->inputs)) { |
| pr_debug("id && !id_a\n"); |
| otg->default_a = 0; |
| clear_bit(A_BUS_DROP, &motg->inputs); |
| otg->phy->state = OTG_STATE_B_IDLE; |
| del_timer_sync(&motg->id_timer); |
| msm_otg_link_reset(motg); |
| msm_chg_enable_aca_intr(motg); |
| msm_otg_notify_charger(motg, 0); |
| work = 1; |
| } else if (!test_bit(A_BUS_DROP, &motg->inputs) && |
| (test_bit(A_SRP_DET, &motg->inputs) || |
| test_bit(A_BUS_REQ, &motg->inputs))) { |
| pr_debug("!a_bus_drop && (a_srp_det || a_bus_req)\n"); |
| |
| clear_bit(A_SRP_DET, &motg->inputs); |
| /* Disable SRP detection */ |
| writel_relaxed((readl_relaxed(USB_OTGSC) & |
| ~OTGSC_INTSTS_MASK) & |
| ~OTGSC_DPIE, USB_OTGSC); |
| |
| otg->phy->state = OTG_STATE_A_WAIT_VRISE; |
| /* VBUS should not be supplied before end of SRP pulse |
| * generated by PET, if not complaince test fail. |
| */ |
| usleep_range(10000, 12000); |
| /* ACA: ID_A: Stop charging untill enumeration */ |
| if (test_bit(ID_A, &motg->inputs)) |
| msm_otg_notify_charger(motg, 0); |
| else |
| msm_hsusb_vbus_power(motg, 1); |
| msm_otg_start_timer(motg, TA_WAIT_VRISE, A_WAIT_VRISE); |
| } else { |
| pr_debug("No session requested\n"); |
| clear_bit(A_BUS_DROP, &motg->inputs); |
| if (test_bit(ID_A, &motg->inputs)) { |
| msm_otg_notify_charger(motg, |
| IDEV_ACA_CHG_MAX); |
| } else if (!test_bit(ID, &motg->inputs)) { |
| msm_otg_notify_charger(motg, 0); |
| /* |
| * A-device is not providing power on VBUS. |
| * Enable SRP detection. |
| */ |
| writel_relaxed(0x13, USB_USBMODE); |
| writel_relaxed((readl_relaxed(USB_OTGSC) & |
| ~OTGSC_INTSTS_MASK) | |
| OTGSC_DPIE, USB_OTGSC); |
| mb(); |
| } |
| } |
| break; |
| case OTG_STATE_A_WAIT_VRISE: |
| if ((test_bit(ID, &motg->inputs) && |
| !test_bit(ID_A, &motg->inputs)) || |
| test_bit(A_BUS_DROP, &motg->inputs) || |
| test_bit(A_WAIT_VRISE, &motg->tmouts)) { |
| pr_debug("id || a_bus_drop || a_wait_vrise_tmout\n"); |
| clear_bit(A_BUS_REQ, &motg->inputs); |
| msm_otg_del_timer(motg); |
| msm_hsusb_vbus_power(motg, 0); |
| otg->phy->state = OTG_STATE_A_WAIT_VFALL; |
| msm_otg_start_timer(motg, TA_WAIT_VFALL, A_WAIT_VFALL); |
| } else if (test_bit(A_VBUS_VLD, &motg->inputs)) { |
| pr_debug("a_vbus_vld\n"); |
| otg->phy->state = OTG_STATE_A_WAIT_BCON; |
| if (TA_WAIT_BCON > 0) |
| msm_otg_start_timer(motg, TA_WAIT_BCON, |
| A_WAIT_BCON); |
| msm_otg_start_host(otg, 1); |
| msm_chg_enable_aca_det(motg); |
| msm_chg_disable_aca_intr(motg); |
| mod_timer(&motg->id_timer, ID_TIMER_FREQ); |
| if (msm_chg_check_aca_intr(motg)) |
| work = 1; |
| } |
| break; |
| case OTG_STATE_A_WAIT_BCON: |
| if ((test_bit(ID, &motg->inputs) && |
| !test_bit(ID_A, &motg->inputs)) || |
| test_bit(A_BUS_DROP, &motg->inputs) || |
| test_bit(A_WAIT_BCON, &motg->tmouts)) { |
| pr_debug("(id && id_a/b/c) || a_bus_drop ||" |
| "a_wait_bcon_tmout\n"); |
| if (test_bit(A_WAIT_BCON, &motg->tmouts)) { |
| pr_info("Device No Response\n"); |
| otg_send_event(OTG_EVENT_DEV_CONN_TMOUT); |
| } |
| msm_otg_del_timer(motg); |
| clear_bit(A_BUS_REQ, &motg->inputs); |
| clear_bit(B_CONN, &motg->inputs); |
| msm_otg_start_host(otg, 0); |
| /* |
| * ACA: ID_A with NO accessory, just the A plug is |
| * attached to ACA: Use IDCHG_MAX for charging |
| */ |
| if (test_bit(ID_A, &motg->inputs)) |
| msm_otg_notify_charger(motg, IDEV_CHG_MIN); |
| else |
| msm_hsusb_vbus_power(motg, 0); |
| otg->phy->state = OTG_STATE_A_WAIT_VFALL; |
| msm_otg_start_timer(motg, TA_WAIT_VFALL, A_WAIT_VFALL); |
| } else if (!test_bit(A_VBUS_VLD, &motg->inputs)) { |
| pr_debug("!a_vbus_vld\n"); |
| clear_bit(B_CONN, &motg->inputs); |
| msm_otg_del_timer(motg); |
| msm_otg_start_host(otg, 0); |
| otg->phy->state = OTG_STATE_A_VBUS_ERR; |
| msm_otg_reset(otg->phy); |
| } else if (test_bit(ID_A, &motg->inputs)) { |
| msm_hsusb_vbus_power(motg, 0); |
| } else if (!test_bit(A_BUS_REQ, &motg->inputs)) { |
| /* |
| * If TA_WAIT_BCON is infinite, we don;t |
| * turn off VBUS. Enter low power mode. |
| */ |
| if (TA_WAIT_BCON < 0) |
| pm_runtime_put_sync(otg->phy->dev); |
| } else if (!test_bit(ID, &motg->inputs)) { |
| msm_hsusb_vbus_power(motg, 1); |
| } |
| break; |
| case OTG_STATE_A_HOST: |
| if ((test_bit(ID, &motg->inputs) && |
| !test_bit(ID_A, &motg->inputs)) || |
| test_bit(A_BUS_DROP, &motg->inputs)) { |
| pr_debug("id_a/b/c || a_bus_drop\n"); |
| clear_bit(B_CONN, &motg->inputs); |
| clear_bit(A_BUS_REQ, &motg->inputs); |
| msm_otg_del_timer(motg); |
| otg->phy->state = OTG_STATE_A_WAIT_VFALL; |
| msm_otg_start_host(otg, 0); |
| if (!test_bit(ID_A, &motg->inputs)) |
| msm_hsusb_vbus_power(motg, 0); |
| msm_otg_start_timer(motg, TA_WAIT_VFALL, A_WAIT_VFALL); |
| } else if (!test_bit(A_VBUS_VLD, &motg->inputs)) { |
| pr_debug("!a_vbus_vld\n"); |
| clear_bit(B_CONN, &motg->inputs); |
| msm_otg_del_timer(motg); |
| otg->phy->state = OTG_STATE_A_VBUS_ERR; |
| msm_otg_start_host(otg, 0); |
| msm_otg_reset(otg->phy); |
| } else if (!test_bit(A_BUS_REQ, &motg->inputs)) { |
| /* |
| * a_bus_req is de-asserted when root hub is |
| * suspended or HNP is in progress. |
| */ |
| pr_debug("!a_bus_req\n"); |
| msm_otg_del_timer(motg); |
| otg->phy->state = OTG_STATE_A_SUSPEND; |
| if (otg->host->b_hnp_enable) |
| msm_otg_start_timer(motg, TA_AIDL_BDIS, |
| A_AIDL_BDIS); |
| else |
| pm_runtime_put_sync(otg->phy->dev); |
| } else if (!test_bit(B_CONN, &motg->inputs)) { |
| pr_debug("!b_conn\n"); |
| msm_otg_del_timer(motg); |
| otg->phy->state = OTG_STATE_A_WAIT_BCON; |
| if (TA_WAIT_BCON > 0) |
| msm_otg_start_timer(motg, TA_WAIT_BCON, |
| A_WAIT_BCON); |
| if (msm_chg_check_aca_intr(motg)) |
| work = 1; |
| } else if (test_bit(ID_A, &motg->inputs)) { |
| msm_otg_del_timer(motg); |
| msm_hsusb_vbus_power(motg, 0); |
| if (motg->chg_type == USB_ACA_DOCK_CHARGER) |
| msm_otg_notify_charger(motg, |
| IDEV_ACA_CHG_MAX); |
| else |
| msm_otg_notify_charger(motg, |
| IDEV_CHG_MIN - motg->mA_port); |
| } else if (!test_bit(ID, &motg->inputs)) { |
| motg->chg_state = USB_CHG_STATE_UNDEFINED; |
| motg->chg_type = USB_INVALID_CHARGER; |
| msm_otg_notify_charger(motg, 0); |
| msm_hsusb_vbus_power(motg, 1); |
| } |
| break; |
| case OTG_STATE_A_SUSPEND: |
| if ((test_bit(ID, &motg->inputs) && |
| !test_bit(ID_A, &motg->inputs)) || |
| test_bit(A_BUS_DROP, &motg->inputs) || |
| test_bit(A_AIDL_BDIS, &motg->tmouts)) { |
| pr_debug("id_a/b/c || a_bus_drop ||" |
| "a_aidl_bdis_tmout\n"); |
| msm_otg_del_timer(motg); |
| clear_bit(B_CONN, &motg->inputs); |
| otg->phy->state = OTG_STATE_A_WAIT_VFALL; |
| msm_otg_start_host(otg, 0); |
| msm_otg_reset(otg->phy); |
| if (!test_bit(ID_A, &motg->inputs)) |
| msm_hsusb_vbus_power(motg, 0); |
| msm_otg_start_timer(motg, TA_WAIT_VFALL, A_WAIT_VFALL); |
| } else if (!test_bit(A_VBUS_VLD, &motg->inputs)) { |
| pr_debug("!a_vbus_vld\n"); |
| msm_otg_del_timer(motg); |
| clear_bit(B_CONN, &motg->inputs); |
| otg->phy->state = OTG_STATE_A_VBUS_ERR; |
| msm_otg_start_host(otg, 0); |
| msm_otg_reset(otg->phy); |
| } else if (!test_bit(B_CONN, &motg->inputs) && |
| otg->host->b_hnp_enable) { |
| pr_debug("!b_conn && b_hnp_enable"); |
| otg->phy->state = OTG_STATE_A_PERIPHERAL; |
| msm_otg_host_hnp_enable(otg, 1); |
| otg->gadget->is_a_peripheral = 1; |
| msm_otg_start_peripheral(otg, 1); |
| } else if (!test_bit(B_CONN, &motg->inputs) && |
| !otg->host->b_hnp_enable) { |
| pr_debug("!b_conn && !b_hnp_enable"); |
| /* |
| * bus request is dropped during suspend. |
| * acquire again for next device. |
| */ |
| set_bit(A_BUS_REQ, &motg->inputs); |
| otg->phy->state = OTG_STATE_A_WAIT_BCON; |
| if (TA_WAIT_BCON > 0) |
| msm_otg_start_timer(motg, TA_WAIT_BCON, |
| A_WAIT_BCON); |
| } else if (test_bit(ID_A, &motg->inputs)) { |
| msm_hsusb_vbus_power(motg, 0); |
| msm_otg_notify_charger(motg, |
| IDEV_CHG_MIN - motg->mA_port); |
| } else if (!test_bit(ID, &motg->inputs)) { |
| msm_otg_notify_charger(motg, 0); |
| msm_hsusb_vbus_power(motg, 1); |
| } |
| break; |
| case OTG_STATE_A_PERIPHERAL: |
| if ((test_bit(ID, &motg->inputs) && |
| !test_bit(ID_A, &motg->inputs)) || |
| test_bit(A_BUS_DROP, &motg->inputs)) { |
| pr_debug("id _f/b/c || a_bus_drop\n"); |
| /* Clear BIDL_ADIS timer */ |
| msm_otg_del_timer(motg); |
| otg->phy->state = OTG_STATE_A_WAIT_VFALL; |
| msm_otg_start_peripheral(otg, 0); |
| otg->gadget->is_a_peripheral = 0; |
| msm_otg_start_host(otg, 0); |
| msm_otg_reset(otg->phy); |
| if (!test_bit(ID_A, &motg->inputs)) |
| msm_hsusb_vbus_power(motg, 0); |
| msm_otg_start_timer(motg, TA_WAIT_VFALL, A_WAIT_VFALL); |
| } else if (!test_bit(A_VBUS_VLD, &motg->inputs)) { |
| pr_debug("!a_vbus_vld\n"); |
| /* Clear BIDL_ADIS timer */ |
| msm_otg_del_timer(motg); |
| otg->phy->state = OTG_STATE_A_VBUS_ERR; |
| msm_otg_start_peripheral(otg, 0); |
| otg->gadget->is_a_peripheral = 0; |
| msm_otg_start_host(otg, 0); |
| } else if (test_bit(A_BIDL_ADIS, &motg->tmouts)) { |
| pr_debug("a_bidl_adis_tmout\n"); |
| msm_otg_start_peripheral(otg, 0); |
| otg->gadget->is_a_peripheral = 0; |
| otg->phy->state = OTG_STATE_A_WAIT_BCON; |
| set_bit(A_BUS_REQ, &motg->inputs); |
| msm_otg_host_hnp_enable(otg, 0); |
| if (TA_WAIT_BCON > 0) |
| msm_otg_start_timer(motg, TA_WAIT_BCON, |
| A_WAIT_BCON); |
| } else if (test_bit(ID_A, &motg->inputs)) { |
| msm_hsusb_vbus_power(motg, 0); |
| msm_otg_notify_charger(motg, |
| IDEV_CHG_MIN - motg->mA_port); |
| } else if (!test_bit(ID, &motg->inputs)) { |
| msm_otg_notify_charger(motg, 0); |
| msm_hsusb_vbus_power(motg, 1); |
| } |
| break; |
| case OTG_STATE_A_WAIT_VFALL: |
| if (test_bit(A_WAIT_VFALL, &motg->tmouts)) { |
| clear_bit(A_VBUS_VLD, &motg->inputs); |
| otg->phy->state = OTG_STATE_A_IDLE; |
| work = 1; |
| } |
| break; |
| case OTG_STATE_A_VBUS_ERR: |
| if ((test_bit(ID, &motg->inputs) && |
| !test_bit(ID_A, &motg->inputs)) || |
| test_bit(A_BUS_DROP, &motg->inputs) || |
| test_bit(A_CLR_ERR, &motg->inputs)) { |
| otg->phy->state = OTG_STATE_A_WAIT_VFALL; |
| if (!test_bit(ID_A, &motg->inputs)) |
| msm_hsusb_vbus_power(motg, 0); |
| msm_otg_start_timer(motg, TA_WAIT_VFALL, A_WAIT_VFALL); |
| motg->chg_state = USB_CHG_STATE_UNDEFINED; |
| motg->chg_type = USB_INVALID_CHARGER; |
| msm_otg_notify_charger(motg, 0); |
| } |
| break; |
| default: |
| break; |
| } |
| if (work) |
| queue_work(system_nrt_wq, &motg->sm_work); |
| } |
| |
| static void msm_otg_suspend_work(struct work_struct *w) |
| { |
| struct msm_otg *motg = |
| container_of(w, struct msm_otg, suspend_work.work); |
| |
| /* This work is only for device bus suspend */ |
| if (test_bit(A_BUS_SUSPEND, &motg->inputs)) |
| msm_otg_sm_work(&motg->sm_work); |
| } |
| |
| static irqreturn_t msm_otg_irq(int irq, void *data) |
| { |
| struct msm_otg *motg = data; |
| struct usb_otg *otg = motg->phy.otg; |
| u32 otgsc = 0, usbsts, pc; |
| bool work = 0; |
| irqreturn_t ret = IRQ_HANDLED; |
| |
| if (atomic_read(&motg->in_lpm)) { |
| pr_debug("OTG IRQ: %d in LPM\n", irq); |
| disable_irq_nosync(irq); |
| motg->async_int = irq; |
| if (!atomic_read(&motg->pm_suspended)) |
| pm_request_resume(otg->phy->dev); |
| return IRQ_HANDLED; |
| } |
| |
| usbsts = readl(USB_USBSTS); |
| otgsc = readl(USB_OTGSC); |
| |
| if (!(otgsc & OTG_OTGSTS_MASK) && !(usbsts & OTG_USBSTS_MASK)) |
| return IRQ_NONE; |
| |
| if ((otgsc & OTGSC_IDIS) && (otgsc & OTGSC_IDIE)) { |
| if (otgsc & OTGSC_ID) { |
| dev_dbg(otg->phy->dev, "ID set\n"); |
| set_bit(ID, &motg->inputs); |
| } else { |
| dev_dbg(otg->phy->dev, "ID clear\n"); |
| /* |
| * Assert a_bus_req to supply power on |
| * VBUS when Micro/Mini-A cable is connected |
| * with out user intervention. |
| */ |
| set_bit(A_BUS_REQ, &motg->inputs); |
| clear_bit(ID, &motg->inputs); |
| msm_chg_enable_aca_det(motg); |
| } |
| writel_relaxed(otgsc, USB_OTGSC); |
| work = 1; |
| } else if (otgsc & OTGSC_DPIS) { |
| pr_debug("DPIS detected\n"); |
| writel_relaxed(otgsc, USB_OTGSC); |
| set_bit(A_SRP_DET, &motg->inputs); |
| set_bit(A_BUS_REQ, &motg->inputs); |
| work = 1; |
| } else if ((otgsc & OTGSC_BSVIE) && (otgsc & OTGSC_BSVIS)) { |
| writel_relaxed(otgsc, USB_OTGSC); |
| /* |
| * BSV interrupt comes when operating as an A-device |
| * (VBUS on/off). |
| * But, handle BSV when charger is removed from ACA in ID_A |
| */ |
| if ((otg->phy->state >= OTG_STATE_A_IDLE) && |
| !test_bit(ID_A, &motg->inputs)) |
| return IRQ_HANDLED; |
| if (otgsc & OTGSC_BSV) { |
| dev_dbg(otg->phy->dev, "BSV set\n"); |
| set_bit(B_SESS_VLD, &motg->inputs); |
| } else { |
| dev_dbg(otg->phy->dev, "BSV clear\n"); |
| clear_bit(B_SESS_VLD, &motg->inputs); |
| clear_bit(A_BUS_SUSPEND, &motg->inputs); |
| |
| msm_chg_check_aca_intr(motg); |
| } |
| work = 1; |
| } else if (usbsts & STS_PCI) { |
| pc = readl_relaxed(USB_PORTSC); |
| pr_debug("portsc = %x\n", pc); |
| ret = IRQ_NONE; |
| /* |
| * HCD Acks PCI interrupt. We use this to switch |
| * between different OTG states. |
| */ |
| work = 1; |
| switch (otg->phy->state) { |
| case OTG_STATE_A_SUSPEND: |
| if (otg->host->b_hnp_enable && (pc & PORTSC_CSC) && |
| !(pc & PORTSC_CCS)) { |
| pr_debug("B_CONN clear\n"); |
| clear_bit(B_CONN, &motg->inputs); |
| msm_otg_del_timer(motg); |
| } |
| break; |
| case OTG_STATE_A_PERIPHERAL: |
| /* |
| * A-peripheral observed activity on bus. |
| * clear A_BIDL_ADIS timer. |
| */ |
| msm_otg_del_timer(motg); |
| work = 0; |
| break; |
| case OTG_STATE_B_WAIT_ACON: |
| if ((pc & PORTSC_CSC) && (pc & PORTSC_CCS)) { |
| pr_debug("A_CONN set\n"); |
| set_bit(A_CONN, &motg->inputs); |
| /* Clear ASE0_BRST timer */ |
| msm_otg_del_timer(motg); |
| } |
| break; |
| case OTG_STATE_B_HOST: |
| if ((pc & PORTSC_CSC) && !(pc & PORTSC_CCS)) { |
| pr_debug("A_CONN clear\n"); |
| clear_bit(A_CONN, &motg->inputs); |
| msm_otg_del_timer(motg); |
| } |
| break; |
| case OTG_STATE_A_WAIT_BCON: |
| if (TA_WAIT_BCON < 0) |
| set_bit(A_BUS_REQ, &motg->inputs); |
| default: |
| work = 0; |
| break; |
| } |
| } else if (usbsts & STS_URI) { |
| ret = IRQ_NONE; |
| switch (otg->phy->state) { |
| case OTG_STATE_A_PERIPHERAL: |
| /* |
| * A-peripheral observed activity on bus. |
| * clear A_BIDL_ADIS timer. |
| */ |
| msm_otg_del_timer(motg); |
| work = 0; |
| break; |
| default: |
| work = 0; |
| break; |
| } |
| } else if (usbsts & STS_SLI) { |
| ret = IRQ_NONE; |
| work = 0; |
| switch (otg->phy->state) { |
| case OTG_STATE_B_PERIPHERAL: |
| if (otg->gadget->b_hnp_enable) { |
| set_bit(A_BUS_SUSPEND, &motg->inputs); |
| set_bit(B_BUS_REQ, &motg->inputs); |
| work = 1; |
| } |
| break; |
| case OTG_STATE_A_PERIPHERAL: |
| msm_otg_start_timer(motg, TA_BIDL_ADIS, |
| A_BIDL_ADIS); |
| break; |
| default: |
| break; |
| } |
| } else if ((usbsts & PHY_ALT_INT)) { |
| writel_relaxed(PHY_ALT_INT, USB_USBSTS); |
| if (msm_chg_check_aca_intr(motg)) |
| work = 1; |
| ret = IRQ_HANDLED; |
| } |
| if (work) |
| queue_work(system_nrt_wq, &motg->sm_work); |
| |
| return ret; |
| } |
| |
| static void msm_otg_set_vbus_state(int online) |
| { |
| static bool init; |
| struct msm_otg *motg = the_msm_otg; |
| |
| if (online) { |
| pr_debug("PMIC: BSV set\n"); |
| set_bit(B_SESS_VLD, &motg->inputs); |
| } else { |
| pr_debug("PMIC: BSV clear\n"); |
| clear_bit(B_SESS_VLD, &motg->inputs); |
| } |
| |
| /* do not queue state m/c work if id is grounded */ |
| if (!test_bit(ID, &motg->inputs)) { |
| /* |
| * state machine work waits for initial VBUS |
| * completion in UNDEFINED state. Process |
| * the initial VBUS event in ID_GND state. |
| */ |
| if (init) |
| return; |
| } |
| |
| if (!init) { |
| init = true; |
| complete(&pmic_vbus_init); |
| pr_debug("PMIC: BSV init complete\n"); |
| return; |
| } |
| |
| if (test_bit(MHL, &motg->inputs) || |
| mhl_det_in_progress) { |
| pr_debug("PMIC: BSV interrupt ignored in MHL\n"); |
| return; |
| } |
| |
| if (atomic_read(&motg->pm_suspended)) |
| motg->sm_work_pending = true; |
| else |
| queue_work(system_nrt_wq, &motg->sm_work); |
| } |
| |
| static void msm_pmic_id_status_w(struct work_struct *w) |
| { |
| struct msm_otg *motg = container_of(w, struct msm_otg, |
| pmic_id_status_work.work); |
| int work = 0; |
| |
| if (msm_otg_read_pmic_id_state(motg)) { |
| if (!test_and_set_bit(ID, &motg->inputs)) { |
| pr_debug("PMIC: ID set\n"); |
| work = 1; |
| } |
| } else { |
| if (test_and_clear_bit(ID, &motg->inputs)) { |
| pr_debug("PMIC: ID clear\n"); |
| set_bit(A_BUS_REQ, &motg->inputs); |
| work = 1; |
| } |
| } |
| |
| if (work && (motg->phy.state != OTG_STATE_UNDEFINED)) { |
| if (atomic_read(&motg->pm_suspended)) |
| motg->sm_work_pending = true; |
| else |
| queue_work(system_nrt_wq, &motg->sm_work); |
| } |
| |
| } |
| |
| #define MSM_PMIC_ID_STATUS_DELAY 5 /* 5msec */ |
| static irqreturn_t msm_pmic_id_irq(int irq, void *data) |
| { |
| struct msm_otg *motg = data; |
| |
| if (test_bit(MHL, &motg->inputs) || |
| mhl_det_in_progress) { |
| pr_debug("PMIC: Id interrupt ignored in MHL\n"); |
| return IRQ_HANDLED; |
| } |
| |
| if (!aca_id_turned_on) |
| /*schedule delayed work for 5msec for ID line state to settle*/ |
| queue_delayed_work(system_nrt_wq, &motg->pmic_id_status_work, |
| msecs_to_jiffies(MSM_PMIC_ID_STATUS_DELAY)); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int msm_otg_mode_show(struct seq_file *s, void *unused) |
| { |
| struct msm_otg *motg = s->private; |
| struct usb_otg *otg = motg->phy.otg; |
| |
| switch (otg->phy->state) { |
| case OTG_STATE_A_HOST: |
| seq_printf(s, "host\n"); |
| break; |
| case OTG_STATE_B_PERIPHERAL: |
| seq_printf(s, "peripheral\n"); |
| break; |
| default: |
| seq_printf(s, "none\n"); |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static int msm_otg_mode_open(struct inode *inode, struct file *file) |
| { |
| return single_open(file, msm_otg_mode_show, inode->i_private); |
| } |
| |
| static ssize_t msm_otg_mode_write(struct file *file, const char __user *ubuf, |
| size_t count, loff_t *ppos) |
| { |
| struct seq_file *s = file->private_data; |
| struct msm_otg *motg = s->private; |
| char buf[16]; |
| struct usb_phy *phy = &motg->phy; |
| int status = count; |
| enum usb_mode_type req_mode; |
| |
| memset(buf, 0x00, sizeof(buf)); |
| |
| if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count))) { |
| status = -EFAULT; |
| goto out; |
| } |
| |
| if (!strncmp(buf, "host", 4)) { |
| req_mode = USB_HOST; |
| } else if (!strncmp(buf, "peripheral", 10)) { |
| req_mode = USB_PERIPHERAL; |
| } else if (!strncmp(buf, "none", 4)) { |
| req_mode = USB_NONE; |
| } else { |
| status = -EINVAL; |
| goto out; |
| } |
| |
| switch (req_mode) { |
| case USB_NONE: |
| switch (phy->state) { |
| case OTG_STATE_A_HOST: |
| case OTG_STATE_B_PERIPHERAL: |
| set_bit(ID, &motg->inputs); |
| clear_bit(B_SESS_VLD, &motg->inputs); |
| break; |
| default: |
| goto out; |
| } |
| break; |
| case USB_PERIPHERAL: |
| switch (phy->state) { |
| case OTG_STATE_B_IDLE: |
| case OTG_STATE_A_HOST: |
| set_bit(ID, &motg->inputs); |
| set_bit(B_SESS_VLD, &motg->inputs); |
| break; |
| default: |
| goto out; |
| } |
| break; |
| case USB_HOST: |
| switch (phy->state) { |
| case OTG_STATE_B_IDLE: |
| case OTG_STATE_B_PERIPHERAL: |
| clear_bit(ID, &motg->inputs); |
| break; |
| default: |
| goto out; |
| } |
| break; |
| default: |
| goto out; |
| } |
| |
| pm_runtime_resume(phy->dev); |
| queue_work(system_nrt_wq, &motg->sm_work); |
| out: |
| return status; |
| } |
| |
| const struct file_operations msm_otg_mode_fops = { |
| .open = msm_otg_mode_open, |
| .read = seq_read, |
| .write = msm_otg_mode_write, |
| .llseek = seq_lseek, |
| .release = single_release, |
| }; |
| |
| static int msm_otg_show_otg_state(struct seq_file *s, void *unused) |
| { |
| struct msm_otg *motg = s->private; |
| struct usb_phy *phy = &motg->phy; |
| |
| seq_printf(s, "%s\n", otg_state_string(phy->state)); |
| return 0; |
| } |
| |
| static int msm_otg_otg_state_open(struct inode *inode, struct file *file) |
| { |
| return single_open(file, msm_otg_show_otg_state, inode->i_private); |
| } |
| |
| const struct file_operations msm_otg_state_fops = { |
| .open = msm_otg_otg_state_open, |
| .read = seq_read, |
| .llseek = seq_lseek, |
| .release = single_release, |
| }; |
| |
| static int msm_otg_show_chg_type(struct seq_file *s, void *unused) |
| { |
| struct msm_otg *motg = s->private; |
| |
| seq_printf(s, "%s\n", chg_to_string(motg->chg_type)); |
| return 0; |
| } |
| |
| static int msm_otg_chg_open(struct inode *inode, struct file *file) |
| { |
| return single_open(file, msm_otg_show_chg_type, inode->i_private); |
| } |
| |
| const struct file_operations msm_otg_chg_fops = { |
| .open = msm_otg_chg_open, |
| .read = seq_read, |
| .llseek = seq_lseek, |
| .release = single_release, |
| }; |
| |
| static int msm_otg_aca_show(struct seq_file *s, void *unused) |
| { |
| if (debug_aca_enabled) |
| seq_printf(s, "enabled\n"); |
| else |
| seq_printf(s, "disabled\n"); |
| |
| return 0; |
| } |
| |
| static int msm_otg_aca_open(struct inode *inode, struct file *file) |
| { |
| return single_open(file, msm_otg_aca_show, inode->i_private); |
| } |
| |
| static ssize_t msm_otg_aca_write(struct file *file, const char __user *ubuf, |
| size_t count, loff_t *ppos) |
| { |
| char buf[8]; |
| |
| memset(buf, 0x00, sizeof(buf)); |
| |
| if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count))) |
| return -EFAULT; |
| |
| if (!strncmp(buf, "enable", 6)) |
| debug_aca_enabled = true; |
| else |
| debug_aca_enabled = false; |
| |
| return count; |
| } |
| |
| const struct file_operations msm_otg_aca_fops = { |
| .open = msm_otg_aca_open, |
| .read = seq_read, |
| .write = msm_otg_aca_write, |
| .llseek = seq_lseek, |
| .release = single_release, |
| }; |
| |
| static int msm_otg_bus_show(struct seq_file *s, void *unused) |
| { |
| if (debug_bus_voting_enabled) |
| seq_printf(s, "enabled\n"); |
| else |
| seq_printf(s, "disabled\n"); |
| |
| return 0; |
| } |
| |
| static int msm_otg_bus_open(struct inode *inode, struct file *file) |
| { |
| return single_open(file, msm_otg_bus_show, inode->i_private); |
| } |
| |
| static ssize_t msm_otg_bus_write(struct file *file, const char __user *ubuf, |
| size_t count, loff_t *ppos) |
| { |
| char buf[8]; |
| int ret; |
| struct seq_file *s = file->private_data; |
| struct msm_otg *motg = s->private; |
| |
| memset(buf, 0x00, sizeof(buf)); |
| |
| if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count))) |
| return -EFAULT; |
| |
| if (!strncmp(buf, "enable", 6)) { |
| /* Do not vote here. Let OTG statemachine decide when to vote */ |
| debug_bus_voting_enabled = true; |
| } else { |
| debug_bus_voting_enabled = false; |
| if (motg->bus_perf_client) { |
| ret = msm_bus_scale_client_update_request( |
| motg->bus_perf_client, 0); |
| if (ret) |
| dev_err(motg->phy.dev, "%s: Failed to devote " |
| "for bus bw %d\n", __func__, ret); |
| } |
| } |
| |
| return count; |
| } |
| |
| static int otg_power_get_property_usb(struct power_supply *psy, |
| enum power_supply_property psp, |
| union power_supply_propval *val) |
| { |
| struct msm_otg *motg = container_of(psy, struct msm_otg, usb_psy); |
| switch (psp) { |
| case POWER_SUPPLY_PROP_SCOPE: |
| if (motg->host_mode) |
| val->intval = POWER_SUPPLY_SCOPE_SYSTEM; |
| else |
| val->intval = POWER_SUPPLY_SCOPE_DEVICE; |
| break; |
| case POWER_SUPPLY_PROP_CURRENT_MAX: |
| val->intval = motg->current_max; |
| break; |
| /* Reflect USB enumeration */ |
| case POWER_SUPPLY_PROP_PRESENT: |
| case POWER_SUPPLY_PROP_ONLINE: |
| val->intval = motg->online; |
| break; |
| default: |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| static int otg_power_set_property_usb(struct power_supply *psy, |
| enum power_supply_property psp, |
| const union power_supply_propval *val) |
| { |
| struct msm_otg *motg = container_of(psy, struct msm_otg, usb_psy); |
| |
| switch (psp) { |
| /* Process PMIC notification in PRESENT prop */ |
| case POWER_SUPPLY_PROP_PRESENT: |
| msm_otg_set_vbus_state(val->intval); |
| break; |
| /* The ONLINE property reflects if usb has enumerated */ |
| case POWER_SUPPLY_PROP_ONLINE: |
| motg->online = val->intval; |
| break; |
| case POWER_SUPPLY_PROP_CURRENT_MAX: |
| motg->current_max = val->intval; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| power_supply_changed(&motg->usb_psy); |
| return 0; |
| } |
| |
| static int otg_power_property_is_writeable_usb(struct power_supply *psy, |
| enum power_supply_property psp) |
| { |
| switch (psp) { |
| case POWER_SUPPLY_PROP_PRESENT: |
| case POWER_SUPPLY_PROP_ONLINE: |
| case POWER_SUPPLY_PROP_CURRENT_MAX: |
| return 1; |
| default: |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static char *otg_pm_power_supplied_to[] = { |
| "battery", |
| }; |
| |
| static enum power_supply_property otg_pm_power_props_usb[] = { |
| POWER_SUPPLY_PROP_PRESENT, |
| POWER_SUPPLY_PROP_ONLINE, |
| POWER_SUPPLY_PROP_CURRENT_MAX, |
| POWER_SUPPLY_PROP_SCOPE, |
| }; |
| |
| const struct file_operations msm_otg_bus_fops = { |
| .open = msm_otg_bus_open, |
| .read = seq_read, |
| .write = msm_otg_bus_write, |
| .llseek = seq_lseek, |
| .release = single_release, |
| }; |
| |
| static struct dentry *msm_otg_dbg_root; |
| |
| static int msm_otg_debugfs_init(struct msm_otg *motg) |
| { |
| struct dentry *msm_otg_dentry; |
| |
| msm_otg_dbg_root = debugfs_create_dir("msm_otg", NULL); |
| |
| if (!msm_otg_dbg_root || IS_ERR(msm_otg_dbg_root)) |
| return -ENODEV; |
| |
| if (motg->pdata->mode == USB_OTG && |
| motg->pdata->otg_control == OTG_USER_CONTROL) { |
| |
| msm_otg_dentry = debugfs_create_file("mode", S_IRUGO | |
| S_IWUSR, msm_otg_dbg_root, motg, |
| &msm_otg_mode_fops); |
| |
| if (!msm_otg_dentry) { |
| debugfs_remove(msm_otg_dbg_root); |
| msm_otg_dbg_root = NULL; |
| return -ENODEV; |
| } |
| } |
| |
| msm_otg_dentry = debugfs_create_file("chg_type", S_IRUGO, |
| msm_otg_dbg_root, motg, |
| &msm_otg_chg_fops); |
| |
| if (!msm_otg_dentry) { |
| debugfs_remove_recursive(msm_otg_dbg_root); |
| return -ENODEV; |
| } |
| |
| msm_otg_dentry = debugfs_create_file("aca", S_IRUGO | S_IWUSR, |
| msm_otg_dbg_root, motg, |
| &msm_otg_aca_fops); |
| |
| if (!msm_otg_dentry) { |
| debugfs_remove_recursive(msm_otg_dbg_root); |
| return -ENODEV; |
| } |
| |
| msm_otg_dentry = debugfs_create_file("bus_voting", S_IRUGO | S_IWUSR, |
| msm_otg_dbg_root, motg, |
| &msm_otg_bus_fops); |
| |
| if (!msm_otg_dentry) { |
| debugfs_remove_recursive(msm_otg_dbg_root); |
| return -ENODEV; |
| } |
| |
| msm_otg_dentry = debugfs_create_file("otg_state", S_IRUGO, |
| msm_otg_dbg_root, motg, &msm_otg_state_fops); |
| |
| if (!msm_otg_dentry) { |
| debugfs_remove_recursive(msm_otg_dbg_root); |
| return -ENODEV; |
| } |
| return 0; |
| } |
| |
| static void msm_otg_debugfs_cleanup(void) |
| { |
| debugfs_remove_recursive(msm_otg_dbg_root); |
| } |
| |
| #define MSM_OTG_CMD_ID 0x09 |
| #define MSM_OTG_DEVICE_ID 0x04 |
| #define MSM_OTG_VMID_IDX 0xFF |
| #define MSM_OTG_MEM_TYPE 0x02 |
| struct msm_otg_scm_cmd_buf { |
| unsigned int device_id; |
| unsigned int vmid_idx; |
| unsigned int mem_type; |
| } __attribute__ ((__packed__)); |
| |
| static void msm_otg_pnoc_errata_fix(struct msm_otg *motg) |
| { |
| int ret; |
| struct msm_otg_platform_data *pdata = motg->pdata; |
| struct msm_otg_scm_cmd_buf cmd_buf; |
| |
| if (!pdata->pnoc_errata_fix) |
| return; |
| |
| dev_dbg(motg->phy.dev, "applying fix for pnoc h/w issue\n"); |
| |
| cmd_buf.device_id = MSM_OTG_DEVICE_ID; |
| cmd_buf.vmid_idx = MSM_OTG_VMID_IDX; |
| cmd_buf.mem_type = MSM_OTG_MEM_TYPE; |
| |
| ret = scm_call(SCM_SVC_MP, MSM_OTG_CMD_ID, &cmd_buf, |
| sizeof(cmd_buf), NULL, 0); |
| |
| if (ret) |
| dev_err(motg->phy.dev, "scm command failed to update VMIDMT\n"); |
| } |
| |
| static u64 msm_otg_dma_mask = DMA_BIT_MASK(64); |
| static struct platform_device *msm_otg_add_pdev( |
| struct platform_device *ofdev, const char *name) |
| { |
| struct platform_device *pdev; |
| const struct resource *res = ofdev->resource; |
| unsigned int num = ofdev->num_resources; |
| int retval; |
| struct ci13xxx_platform_data ci_pdata; |
| struct msm_otg_platform_data *otg_pdata; |
| |
| pdev = platform_device_alloc(name, -1); |
| if (!pdev) { |
| retval = -ENOMEM; |
| goto error; |
| } |
| |
| pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); |
| pdev->dev.dma_mask = &msm_otg_dma_mask; |
| |
| if (num) { |
| retval = platform_device_add_resources(pdev, res, num); |
| if (retval) |
| goto error; |
| } |
| |
| if (!strcmp(name, "msm_hsusb")) { |
| otg_pdata = |
| (struct msm_otg_platform_data *) |
| ofdev->dev.platform_data; |
| ci_pdata.log2_itc = otg_pdata->log2_itc; |
| ci_pdata.usb_core_id = 0; |
| ci_pdata.l1_supported = otg_pdata->l1_supported; |
| retval = platform_device_add_data(pdev, &ci_pdata, |
| sizeof(ci_pdata)); |
| if (retval) |
| goto error; |
| } |
| |
| retval = platform_device_add(pdev); |
| if (retval) |
| goto error; |
| |
| return pdev; |
| |
| error: |
| platform_device_put(pdev); |
| return ERR_PTR(retval); |
| } |
| |
| static int msm_otg_setup_devices(struct platform_device *ofdev, |
| enum usb_mode_type mode, bool init) |
| { |
| const char *gadget_name = "msm_hsusb"; |
| const char *host_name = "msm_hsusb_host"; |
| static struct platform_device *gadget_pdev; |
| static struct platform_device *host_pdev; |
| int retval = 0; |
| |
| if (!init) { |
| if (gadget_pdev) |
| platform_device_unregister(gadget_pdev); |
| if (host_pdev) |
| platform_device_unregister(host_pdev); |
| return 0; |
| } |
| |
| switch (mode) { |
| case USB_OTG: |
| /* fall through */ |
| case USB_PERIPHERAL: |
| gadget_pdev = msm_otg_add_pdev(ofdev, gadget_name); |
| if (IS_ERR(gadget_pdev)) { |
| retval = PTR_ERR(gadget_pdev); |
| break; |
| } |
| if (mode == USB_PERIPHERAL) |
| break; |
| /* fall through */ |
| case USB_HOST: |
| host_pdev = msm_otg_add_pdev(ofdev, host_name); |
| if (IS_ERR(host_pdev)) { |
| retval = PTR_ERR(host_pdev); |
| if (mode == USB_OTG) |
| platform_device_unregister(gadget_pdev); |
| } |
| break; |
| default: |
| break; |
| } |
| |
| return retval; |
| } |
| |
| static int msm_otg_register_power_supply(struct platform_device *pdev, |
| struct msm_otg *motg) |
| { |
| int ret; |
| |
| ret = power_supply_register(&pdev->dev, &motg->usb_psy); |
| if (ret < 0) { |
| dev_err(motg->phy.dev, |
| "%s:power_supply_register usb failed\n", |
| __func__); |
| return ret; |
| } |
| |
| legacy_power_supply = false; |
| return 0; |
| } |
| |
| struct msm_otg_platform_data *msm_otg_dt_to_pdata(struct platform_device *pdev) |
| { |
| struct device_node *node = pdev->dev.of_node; |
| struct msm_otg_platform_data *pdata; |
| int len = 0; |
| |
| pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); |
| if (!pdata) { |
| pr_err("unable to allocate platform data\n"); |
| return NULL; |
| } |
| of_get_property(node, "qcom,hsusb-otg-phy-init-seq", &len); |
| if (len) { |
| pdata->phy_init_seq = devm_kzalloc(&pdev->dev, len, GFP_KERNEL); |
| if (!pdata->phy_init_seq) |
| return NULL; |
| of_property_read_u32_array(node, "qcom,hsusb-otg-phy-init-seq", |
| pdata->phy_init_seq, |
| len/sizeof(*pdata->phy_init_seq)); |
| } |
| of_property_read_u32(node, "qcom,hsusb-otg-power-budget", |
| &pdata->power_budget); |
| of_property_read_u32(node, "qcom,hsusb-otg-mode", |
| &pdata->mode); |
| of_property_read_u32(node, "qcom,hsusb-otg-otg-control", |
| &pdata->otg_control); |
| of_property_read_u32(node, "qcom,hsusb-otg-default-mode", |
| &pdata->default_mode); |
| of_property_read_u32(node, "qcom,hsusb-otg-phy-type", |
| &pdata->phy_type); |
| pdata->disable_reset_on_disconnect = of_property_read_bool(node, |
| "qcom,hsusb-otg-disable-reset"); |
| pdata->pnoc_errata_fix = of_property_read_bool(node, |
| "qcom,hsusb-otg-pnoc-errata-fix"); |
| pdata->enable_lpm_on_dev_suspend = of_property_read_bool(node, |
| "qcom,hsusb-otg-lpm-on-dev-suspend"); |
| pdata->core_clk_always_on_workaround = of_property_read_bool(node, |
| "qcom,hsusb-otg-clk-always-on-workaround"); |
| pdata->delay_lpm_on_disconnect = of_property_read_bool(node, |
| "qcom,hsusb-otg-delay-lpm"); |
| pdata->delay_lpm_hndshk_on_disconnect = of_property_read_bool(node, |
| "qcom,hsusb-otg-delay-lpm-hndshk-on-disconnect"); |
| pdata->dp_manual_pullup = of_property_read_bool(node, |
| "qcom,dp-manual-pullup"); |
| pdata->enable_sec_phy = of_property_read_bool(node, |
| "qcom,usb2-enable-hsphy2"); |
| of_property_read_u32(node, "qcom,hsusb-log2-itc", |
| &pdata->log2_itc); |
| |
| pdata->pmic_id_irq = platform_get_irq_byname(pdev, "pmic_id_irq"); |
| if (pdata->pmic_id_irq < 0) |
| pdata->pmic_id_irq = 0; |
| |
| pdata->l1_supported = of_property_read_bool(node, |
| "qcom,hsusb-l1-supported"); |
| |
| return pdata; |
| } |
| |
| static int __init msm_otg_probe(struct platform_device *pdev) |
| { |
| int ret = 0; |
| int len = 0; |
| u32 tmp[3]; |
| struct resource *res; |
| struct msm_otg *motg; |
| struct usb_phy *phy; |
| struct msm_otg_platform_data *pdata; |
| |
| dev_info(&pdev->dev, "msm_otg probe\n"); |
| |
| if (pdev->dev.of_node) { |
| dev_dbg(&pdev->dev, "device tree enabled\n"); |
| pdata = msm_otg_dt_to_pdata(pdev); |
| if (!pdata) |
| return -ENOMEM; |
| |
| pdata->bus_scale_table = msm_bus_cl_get_pdata(pdev); |
| if (!pdata->bus_scale_table) |
| dev_dbg(&pdev->dev, "bus scaling is disabled\n"); |
| |
| pdev->dev.platform_data = pdata; |
| ret = msm_otg_setup_devices(pdev, pdata->mode, true); |
| if (ret) { |
| dev_err(&pdev->dev, "devices setup failed\n"); |
| return ret; |
| } |
| } else if (!pdev->dev.platform_data) { |
| dev_err(&pdev->dev, "No platform data given. Bailing out\n"); |
| return -ENODEV; |
| } else { |
| pdata = pdev->dev.platform_data; |
| } |
| |
| motg = kzalloc(sizeof(struct msm_otg), GFP_KERNEL); |
| if (!motg) { |
| dev_err(&pdev->dev, "unable to allocate msm_otg\n"); |
| return -ENOMEM; |
| } |
| |
| motg->phy.otg = kzalloc(sizeof(struct usb_otg), GFP_KERNEL); |
| if (!motg->phy.otg) { |
| dev_err(&pdev->dev, "unable to allocate usb_otg\n"); |
| ret = -ENOMEM; |
| goto free_motg; |
| } |
| |
| the_msm_otg = motg; |
| motg->pdata = pdata; |
| phy = &motg->phy; |
| phy->dev = &pdev->dev; |
| |
| /* |
| * ACA ID_GND threshold range is overlapped with OTG ID_FLOAT. Hence |
| * PHY treat ACA ID_GND as float and no interrupt is generated. But |
| * PMIC can detect ACA ID_GND and generate an interrupt. |
| */ |
| if (aca_enabled() && motg->pdata->otg_control != OTG_PMIC_CONTROL) { |
| dev_err(&pdev->dev, "ACA can not be enabled without PMIC\n"); |
| ret = -EINVAL; |
| goto free_otg; |
| } |
| |
| /* initialize reset counter */ |
| motg->reset_counter = 0; |
| |
| /* Some targets don't support PHY clock. */ |
| motg->phy_reset_clk = clk_get(&pdev->dev, "phy_clk"); |
| if (IS_ERR(motg->phy_reset_clk)) |
| dev_err(&pdev->dev, "failed to get phy_clk\n"); |
| |
| /* |
| * Targets on which link uses asynchronous reset methodology, |
| * free running clock is not required during the reset. |
| */ |
| motg->clk = clk_get(&pdev->dev, "alt_core_clk"); |
| if (IS_ERR(motg->clk)) |
| dev_dbg(&pdev->dev, "alt_core_clk is not present\n"); |
| else |
| clk_set_rate(motg->clk, 60000000); |
| |
| /* |
| * USB Core is running its protocol engine based on CORE CLK, |
| * CORE CLK must be running at >55Mhz for correct HSUSB |
| * operation and USB core cannot tolerate frequency changes on |
| * CORE CLK. For such USB cores, vote for maximum clk frequency |
| * on pclk source |
| */ |
| motg->core_clk = clk_get(&pdev->dev, "core_clk"); |
| if (IS_ERR(motg->core_clk)) { |
| motg->core_clk = NULL; |
| dev_err(&pdev->dev, "failed to get core_clk\n"); |
| ret = PTR_ERR(motg->core_clk); |
| goto put_clk; |
| } |
| |
| /* |
| * Get Max supported clk frequency for USB Core CLK and request |
| * to set the same. |
| */ |
| motg->core_clk_rate = clk_round_rate(motg->core_clk, LONG_MAX); |
| if (IS_ERR_VALUE(motg->core_clk_rate)) { |
| dev_err(&pdev->dev, "fail to get core clk max freq.\n"); |
| } else { |
| ret = clk_set_rate(motg->core_clk, motg->core_clk_rate); |
| if (ret) |
| dev_err(&pdev->dev, "fail to set core_clk freq:%d\n", |
| ret); |
| } |
| |
| motg->pclk = clk_get(&pdev->dev, "iface_clk"); |
| if (IS_ERR(motg->pclk)) { |
| dev_err(&pdev->dev, "failed to get iface_clk\n"); |
| ret = PTR_ERR(motg->pclk); |
| goto put_core_clk; |
| } |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (!res) { |
| dev_err(&pdev->dev, "failed to get platform resource mem\n"); |
| ret = -ENODEV; |
| goto put_pclk; |
| } |
| |
| motg->regs = ioremap(res->start, resource_size(res)); |
| if (!motg->regs) { |
| dev_err(&pdev->dev, "ioremap failed\n"); |
| ret = -ENOMEM; |
| goto put_pclk; |
| } |
| dev_info(&pdev->dev, "OTG regs = %p\n", motg->regs); |
| |
| motg->irq = platform_get_irq(pdev, 0); |
| if (!motg->irq) { |
| dev_err(&pdev->dev, "platform_get_irq failed\n"); |
| ret = -ENODEV; |
| goto free_regs; |
| } |
| |
| motg->async_irq = platform_get_irq_byname(pdev, "async_irq"); |
| if (motg->async_irq < 0) { |
| dev_dbg(&pdev->dev, "platform_get_irq for async_int failed\n"); |
| motg->async_irq = 0; |
| } |
| |
| motg->xo_clk = clk_get(&pdev->dev, "xo"); |
| if (IS_ERR(motg->xo_clk)) { |
| motg->xo_handle = msm_xo_get(MSM_XO_TCXO_D0, "usb"); |
| if (IS_ERR(motg->xo_handle)) { |
| dev_err(&pdev->dev, "%s fail to get handle for TCXO\n", |
| __func__); |
| ret = PTR_ERR(motg->xo_handle); |
| goto free_regs; |
| } else { |
| ret = msm_xo_mode_vote(motg->xo_handle, MSM_XO_MODE_ON); |
| if (ret) { |
| dev_err(&pdev->dev, "%s XO voting failed %d\n", |
| __func__, ret); |
| goto free_xo_handle; |
| } |
| } |
| } else { |
| ret = clk_prepare_enable(motg->xo_clk); |
| if (ret) { |
| dev_err(&pdev->dev, "%s failed to vote for TCXO %d\n", |
| __func__, ret); |
| goto free_xo_handle; |
| } |
| } |
| |
| |
| clk_prepare_enable(motg->pclk); |
| |
| motg->vdd_type = VDDCX_CORNER; |
| hsusb_vdd = devm_regulator_get(motg->phy.dev, "hsusb_vdd_dig"); |
| if (IS_ERR(hsusb_vdd)) { |
| hsusb_vdd = devm_regulator_get(motg->phy.dev, "HSUSB_VDDCX"); |
| if (IS_ERR(hsusb_vdd)) { |
| dev_err(motg->phy.dev, "unable to get hsusb vddcx\n"); |
| ret = PTR_ERR(hsusb_vdd); |
| goto devote_xo_handle; |
| } |
| motg->vdd_type = VDDCX; |
| } |
| |
| if (pdev->dev.of_node) { |
| of_get_property(pdev->dev.of_node, |
| "qcom,vdd-voltage-level", |
| &len); |
| if (len == sizeof(tmp)) { |
| of_property_read_u32_array(pdev->dev.of_node, |
| "qcom,vdd-voltage-level", |
| tmp, len/sizeof(*tmp)); |
| vdd_val[motg->vdd_type][0] = tmp[0]; |
| vdd_val[motg->vdd_type][1] = tmp[1]; |
| vdd_val[motg->vdd_type][2] = tmp[2]; |
| } else { |
| dev_dbg(&pdev->dev, "Using default hsusb vdd config.\n"); |
| } |
| } |
| |
| ret = msm_hsusb_config_vddcx(1); |
| if (ret) { |
| dev_err(&pdev->dev, "hsusb vddcx configuration failed\n"); |
| goto devote_xo_handle; |
| } |
| |
| ret = regulator_enable(hsusb_vdd); |
| if (ret) { |
| dev_err(&pdev->dev, "unable to enable the hsusb vddcx\n"); |
| goto free_config_vddcx; |
| } |
| |
| ret = msm_hsusb_ldo_init(motg, 1); |
| if (ret) { |
| dev_err(&pdev->dev, "hsusb vreg configuration failed\n"); |
| goto free_hsusb_vdd; |
| } |
| |
| if (pdata->mhl_enable) { |
| mhl_usb_hs_switch = devm_regulator_get(motg->phy.dev, |
| "mhl_usb_hs_switch"); |
| if (IS_ERR(mhl_usb_hs_switch)) { |
| dev_err(&pdev->dev, "Unable to get mhl_usb_hs_switch\n"); |
| ret = PTR_ERR(mhl_usb_hs_switch); |
| goto free_ldo_init; |
| } |
| } |
| |
| ret = msm_hsusb_ldo_enable(motg, USB_PHY_REG_ON); |
| if (ret) { |
| dev_err(&pdev->dev, "hsusb vreg enable failed\n"); |
| goto free_ldo_init; |
| } |
| clk_prepare_enable(motg->core_clk); |
| |
| /* Check if USB mem_type change is needed to workaround PNOC hw issue */ |
| msm_otg_pnoc_errata_fix(motg); |
| |
| writel(0, USB_USBINTR); |
| writel(0, USB_OTGSC); |
| /* Ensure that above STOREs are completed before enabling interrupts */ |
| mb(); |
| |
| ret = msm_otg_mhl_register_callback(motg, msm_otg_mhl_notify_online); |
| if (ret) |
| dev_dbg(&pdev->dev, "MHL can not be supported\n"); |
| wake_lock_init(&motg->wlock, WAKE_LOCK_SUSPEND, "msm_otg"); |
| msm_otg_init_timer(motg); |
| INIT_WORK(&motg->sm_work, msm_otg_sm_work); |
| INIT_DELAYED_WORK(&motg->chg_work, msm_chg_detect_work); |
| INIT_DELAYED_WORK(&motg->pmic_id_status_work, msm_pmic_id_status_w); |
| INIT_DELAYED_WORK(&motg->suspend_work, msm_otg_suspend_work); |
| setup_timer(&motg->id_timer, msm_otg_id_timer_func, |
| (unsigned long) motg); |
| setup_timer(&motg->chg_check_timer, msm_otg_chg_check_timer_func, |
| (unsigned long) motg); |
| ret = request_irq(motg->irq, msm_otg_irq, IRQF_SHARED, |
| "msm_otg", motg); |
| if (ret) { |
| dev_err(&pdev->dev, "request irq failed\n"); |
| goto destroy_wlock; |
| } |
| |
| if (motg->async_irq) { |
| ret = request_irq(motg->async_irq, msm_otg_irq, |
| IRQF_TRIGGER_RISING, "msm_otg", motg); |
| if (ret) { |
| dev_err(&pdev->dev, "request irq failed (ASYNC INT)\n"); |
| goto free_irq; |
| } |
| disable_irq(motg->async_irq); |
| } |
| |
| if (pdata->otg_control == OTG_PHY_CONTROL && pdata->mpm_otgsessvld_int) |
| msm_mpm_enable_pin(pdata->mpm_otgsessvld_int, 1); |
| |
| phy->init = msm_otg_reset; |
| phy->set_power = msm_otg_set_power; |
| phy->set_suspend = msm_otg_set_suspend; |
| |
| phy->io_ops = &msm_otg_io_ops; |
| |
| phy->otg->phy = &motg->phy; |
| phy->otg->set_host = msm_otg_set_host; |
| phy->otg->set_peripheral = msm_otg_set_peripheral; |
| phy->otg->start_hnp = msm_otg_start_hnp; |
| phy->otg->start_srp = msm_otg_start_srp; |
| if (pdata->dp_manual_pullup) |
| phy->flags |= ENABLE_DP_MANUAL_PULLUP; |
| |
| if (pdata->enable_sec_phy) |
| phy->flags |= ENABLE_SECONDARY_PHY; |
| |
| ret = usb_set_transceiver(&motg->phy); |
| if (ret) { |
| dev_err(&pdev->dev, "usb_set_transceiver failed\n"); |
| goto free_async_irq; |
| } |
| |
| if (motg->pdata->mode == USB_OTG && |
| motg->pdata->otg_control == OTG_PMIC_CONTROL) { |
| if (motg->pdata->pmic_id_irq) { |
| ret = request_irq(motg->pdata->pmic_id_irq, |
| msm_pmic_id_irq, |
| IRQF_TRIGGER_RISING | |
| IRQF_TRIGGER_FALLING, |
| "msm_otg", motg); |
| if (ret) { |
| dev_err(&pdev->dev, "request irq failed for PMIC ID\n"); |
| goto remove_phy; |
| } |
| } else { |
| ret = -ENODEV; |
| dev_err(&pdev->dev, "PMIC IRQ for ID notifications doesn't exist\n"); |
| goto remove_phy; |
| } |
| } |
| |
| msm_hsusb_mhl_switch_enable(motg, 1); |
| |
| platform_set_drvdata(pdev, motg); |
| device_init_wakeup(&pdev->dev, 1); |
| motg->mA_port = IUNIT; |
| |
| ret = msm_otg_debugfs_init(motg); |
| if (ret) |
| dev_dbg(&pdev->dev, "mode debugfs file is" |
| "not available\n"); |
| |
| if (motg->pdata->phy_type == SNPS_28NM_INTEGRATED_PHY) { |
| if (motg->pdata->otg_control == OTG_PMIC_CONTROL && |
| (!(motg->pdata->mode == USB_OTG) || |
| motg->pdata->pmic_id_irq)) |
| motg->caps = ALLOW_PHY_POWER_COLLAPSE | |
| ALLOW_PHY_RETENTION; |
| |
| if (motg->pdata->otg_control == OTG_PHY_CONTROL) |
| motg->caps = ALLOW_PHY_RETENTION | |
| ALLOW_PHY_REGULATORS_LPM; |
| } |
| |
| if (motg->pdata->enable_lpm_on_dev_suspend) |
| motg->caps |= ALLOW_LPM_ON_DEV_SUSPEND; |
| |
| wake_lock(&motg->wlock); |
| pm_runtime_set_active(&pdev->dev); |
| pm_runtime_enable(&pdev->dev); |
| |
| if (motg->pdata->delay_lpm_on_disconnect) { |
| pm_runtime_set_autosuspend_delay(&pdev->dev, |
| lpm_disconnect_thresh); |
| pm_runtime_use_autosuspend(&pdev->dev); |
| } |
| |
| if (motg->pdata->bus_scale_table) { |
| motg->bus_perf_client = |
| msm_bus_scale_register_client(motg->pdata->bus_scale_table); |
| if (!motg->bus_perf_client) |
| dev_err(motg->phy.dev, "%s: Failed to register BUS " |
| "scaling client!!\n", __func__); |
| else |
| debug_bus_voting_enabled = true; |
| } |
| |
| motg->usb_psy.name = "usb"; |
| motg->usb_psy.type = POWER_SUPPLY_TYPE_USB; |
| motg->usb_psy.supplied_to = otg_pm_power_supplied_to; |
| motg->usb_psy.num_supplicants = ARRAY_SIZE(otg_pm_power_supplied_to); |
| motg->usb_psy.properties = otg_pm_power_props_usb; |
| motg->usb_psy.num_properties = ARRAY_SIZE(otg_pm_power_props_usb); |
| motg->usb_psy.get_property = otg_power_get_property_usb; |
| motg->usb_psy.set_property = otg_power_set_property_usb; |
| motg->usb_psy.property_is_writeable |
| = otg_power_property_is_writeable_usb; |
| |
| if (!pm8921_charger_register_vbus_sn(NULL)) { |
| /* if pm8921 use legacy implementation */ |
| dev_dbg(motg->phy.dev, "%s: legacy support\n", __func__); |
| legacy_power_supply = true; |
| } else { |
| /* otherwise register our own power supply */ |
| if (!msm_otg_register_power_supply(pdev, motg)) |
| psy = &motg->usb_psy; |
| } |
| |
| if (legacy_power_supply && pdata->otg_control == OTG_PMIC_CONTROL) |
| pm8921_charger_register_vbus_sn(&msm_otg_set_vbus_state); |
| |
| return 0; |
| |
| remove_phy: |
| usb_set_transceiver(NULL); |
| free_async_irq: |
| if (motg->async_irq) |
| free_irq(motg->async_irq, motg); |
| free_irq: |
| free_irq(motg->irq, motg); |
| destroy_wlock: |
| wake_lock_destroy(&motg->wlock); |
| clk_disable_unprepare(motg->core_clk); |
| msm_hsusb_ldo_enable(motg, USB_PHY_REG_OFF); |
| free_ldo_init: |
| msm_hsusb_ldo_init(motg, 0); |
| free_hsusb_vdd: |
| regulator_disable(hsusb_vdd); |
| free_config_vddcx: |
| regulator_set_voltage(hsusb_vdd, |
| vdd_val[motg->vdd_type][VDD_NONE], |
| vdd_val[motg->vdd_type][VDD_MAX]); |
| devote_xo_handle: |
| clk_disable_unprepare(motg->pclk); |
| if (!IS_ERR(motg->xo_clk)) |
| clk_disable_unprepare(motg->xo_clk); |
| else |
| msm_xo_mode_vote(motg->xo_handle, MSM_XO_MODE_OFF); |
| free_xo_handle: |
| if (!IS_ERR(motg->xo_clk)) |
| clk_put(motg->xo_clk); |
| else |
| msm_xo_put(motg->xo_handle); |
| free_regs: |
| iounmap(motg->regs); |
| put_pclk: |
| clk_put(motg->pclk); |
| put_core_clk: |
| clk_put(motg->core_clk); |
| put_clk: |
| if (!IS_ERR(motg->clk)) |
| clk_put(motg->clk); |
| if (!IS_ERR(motg->phy_reset_clk)) |
| clk_put(motg->phy_reset_clk); |
| free_otg: |
| kfree(motg->phy.otg); |
| free_motg: |
| kfree(motg); |
| return ret; |
| } |
| |
| static int __devexit msm_otg_remove(struct platform_device *pdev) |
| { |
| struct msm_otg *motg = platform_get_drvdata(pdev); |
| struct usb_phy *phy = &motg->phy; |
| int cnt = 0; |
| |
| if (phy->otg->host || phy->otg->gadget) |
| return -EBUSY; |
| |
| if (pdev->dev.of_node) |
| msm_otg_setup_devices(pdev, motg->pdata->mode, false); |
| if (motg->pdata->otg_control == OTG_PMIC_CONTROL) |
| pm8921_charger_unregister_vbus_sn(0); |
| msm_otg_mhl_register_callback(motg, NULL); |
| msm_otg_debugfs_cleanup(); |
| cancel_delayed_work_sync(&motg->chg_work); |
| cancel_delayed_work_sync(&motg->pmic_id_status_work); |
| cancel_delayed_work_sync(&motg->suspend_work); |
| cancel_work_sync(&motg->sm_work); |
| |
| pm_runtime_resume(&pdev->dev); |
| |
| device_init_wakeup(&pdev->dev, 0); |
| pm_runtime_disable(&pdev->dev); |
| wake_lock_destroy(&motg->wlock); |
| |
| msm_hsusb_mhl_switch_enable(motg, 0); |
| if (motg->pdata->pmic_id_irq) |
| free_irq(motg->pdata->pmic_id_irq, motg); |
| usb_set_transceiver(NULL); |
| free_irq(motg->irq, motg); |
| |
| if (motg->pdata->otg_control == OTG_PHY_CONTROL && |
| motg->pdata->mpm_otgsessvld_int) |
| msm_mpm_enable_pin(motg->pdata->mpm_otgsessvld_int, 0); |
| |
| /* |
| * Put PHY in low power mode. |
| */ |
| ulpi_read(phy, 0x14); |
| ulpi_write(phy, 0x08, 0x09); |
| |
| writel(readl(USB_PORTSC) | PORTSC_PHCD, USB_PORTSC); |
| while (cnt < PHY_SUSPEND_TIMEOUT_USEC) { |
| if (readl(USB_PORTSC) & PORTSC_PHCD) |
| break; |
| udelay(1); |
| cnt++; |
| } |
| if (cnt >= PHY_SUSPEND_TIMEOUT_USEC) |
| dev_err(phy->dev, "Unable to suspend PHY\n"); |
| |
| clk_disable_unprepare(motg->pclk); |
| clk_disable_unprepare(motg->core_clk); |
| if (!IS_ERR(motg->xo_clk)) { |
| clk_disable_unprepare(motg->xo_clk); |
| clk_put(motg->xo_clk); |
| } else { |
| msm_xo_put(motg->xo_handle); |
| } |
| msm_hsusb_ldo_enable(motg, USB_PHY_REG_OFF); |
| msm_hsusb_ldo_init(motg, 0); |
| regulator_disable(hsusb_vdd); |
| regulator_set_voltage(hsusb_vdd, |
| vdd_val[motg->vdd_type][VDD_NONE], |
| vdd_val[motg->vdd_type][VDD_MAX]); |
| |
| iounmap(motg->regs); |
| pm_runtime_set_suspended(&pdev->dev); |
| |
| if (!IS_ERR(motg->phy_reset_clk)) |
| clk_put(motg->phy_reset_clk); |
| clk_put(motg->pclk); |
| if (!IS_ERR(motg->clk)) |
| clk_put(motg->clk); |
| clk_put(motg->core_clk); |
| |
| if (motg->bus_perf_client) |
| msm_bus_scale_unregister_client(motg->bus_perf_client); |
| |
| kfree(motg->phy.otg); |
| kfree(motg); |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM_RUNTIME |
| static int msm_otg_runtime_idle(struct device *dev) |
| { |
| struct msm_otg *motg = dev_get_drvdata(dev); |
| struct usb_phy *phy = &motg->phy; |
| |
| dev_dbg(dev, "OTG runtime idle\n"); |
| |
| if (phy->state == OTG_STATE_UNDEFINED) |
| return -EAGAIN; |
| else |
| return 0; |
| } |
| |
| static int msm_otg_runtime_suspend(struct device *dev) |
| { |
| struct msm_otg *motg = dev_get_drvdata(dev); |
| |
| dev_dbg(dev, "OTG runtime suspend\n"); |
| return msm_otg_suspend(motg); |
| } |
| |
| static int msm_otg_runtime_resume(struct device *dev) |
| { |
| struct msm_otg *motg = dev_get_drvdata(dev); |
| |
| dev_dbg(dev, "OTG runtime resume\n"); |
| pm_runtime_get_noresume(dev); |
| return msm_otg_resume(motg); |
| } |
| #endif |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int msm_otg_pm_suspend(struct device *dev) |
| { |
| int ret = 0; |
| struct msm_otg *motg = dev_get_drvdata(dev); |
| |
| dev_dbg(dev, "OTG PM suspend\n"); |
| |
| atomic_set(&motg->pm_suspended, 1); |
| ret = msm_otg_suspend(motg); |
| if (ret) |
| atomic_set(&motg->pm_suspended, 0); |
| |
| return ret; |
| } |
| |
| static int msm_otg_pm_resume(struct device *dev) |
| { |
| int ret = 0; |
| struct msm_otg *motg = dev_get_drvdata(dev); |
| |
| dev_dbg(dev, "OTG PM resume\n"); |
| |
| atomic_set(&motg->pm_suspended, 0); |
| if (motg->async_int || motg->sm_work_pending) { |
| pm_runtime_get_noresume(dev); |
| ret = msm_otg_resume(motg); |
| |
| /* Update runtime PM status */ |
| pm_runtime_disable(dev); |
| pm_runtime_set_active(dev); |
| pm_runtime_enable(dev); |
| |
| if (motg->sm_work_pending) { |
| motg->sm_work_pending = false; |
| queue_work(system_nrt_wq, &motg->sm_work); |
| } |
| } |
| |
| return ret; |
| } |
| #endif |
| |
| #ifdef CONFIG_PM |
| static const struct dev_pm_ops msm_otg_dev_pm_ops = { |
| SET_SYSTEM_SLEEP_PM_OPS(msm_otg_pm_suspend, msm_otg_pm_resume) |
| SET_RUNTIME_PM_OPS(msm_otg_runtime_suspend, msm_otg_runtime_resume, |
| msm_otg_runtime_idle) |
| }; |
| #endif |
| |
| static struct of_device_id msm_otg_dt_match[] = { |
| { .compatible = "qcom,hsusb-otg", |
| }, |
| {} |
| }; |
| |
| static struct platform_driver msm_otg_driver = { |
| .remove = __devexit_p(msm_otg_remove), |
| .driver = { |
| .name = DRIVER_NAME, |
| .owner = THIS_MODULE, |
| #ifdef CONFIG_PM |
| .pm = &msm_otg_dev_pm_ops, |
| #endif |
| .of_match_table = msm_otg_dt_match, |
| }, |
| }; |
| |
| static int __init msm_otg_init(void) |
| { |
| return platform_driver_probe(&msm_otg_driver, msm_otg_probe); |
| } |
| |
| static void __exit msm_otg_exit(void) |
| { |
| platform_driver_unregister(&msm_otg_driver); |
| } |
| |
| module_init(msm_otg_init); |
| module_exit(msm_otg_exit); |
| |
| MODULE_LICENSE("GPL v2"); |
| MODULE_DESCRIPTION("MSM USB transceiver driver"); |