arch/arm/mach-msm/board-sapphire.h - fp2-dev/kernel/msm - Gitiles

 /* linux/arch/arm/mach-msm/board-sapphire.h
  * Copyright (C) 2007-2009 HTC Corporation.
  * Author: Thomas Tsai <thomas_tsai@htc.com>
  *
  * This software is licensed under the terms of the GNU General Public
  * License version 2, as published by the Free Software Foundation, and
  * may be copied, distributed, and modified under those terms.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
 */
 #ifndef __ARCH_ARM_MACH_MSM_BOARD_SAPPHIRE_H
 #define __ARCH_ARM_MACH_MSM_BOARD_SAPPHIRE_H

 #include <mach/board.h>

 #define MSM_SMI_BASE		0x00000000
 #define MSM_SMI_SIZE		0x00800000

 #define MSM_EBI_BASE		0x10000000
 #define MSM_EBI_SIZE		0x07100000

 #define MSM_PMEM_GPU0_BASE	0x00000000
 #define MSM_PMEM_GPU0_SIZE	0x00700000

 #define SMI64_MSM_PMEM_MDP_BASE	0x15900000
 #define SMI64_MSM_PMEM_MDP_SIZE	0x00800000

 #define SMI64_MSM_PMEM_ADSP_BASE	0x16100000
 #define SMI64_MSM_PMEM_ADSP_SIZE	0x00800000

 #define SMI64_MSM_PMEM_CAMERA_BASE	0x15400000
 #define SMI64_MSM_PMEM_CAMERA_SIZE	0x00500000

 #define SMI64_MSM_FB_BASE		0x00700000
 #define SMI64_MSM_FB_SIZE		0x00100000

 #define SMI64_MSM_LINUX_BASE		MSM_EBI_BASE
 #define SMI64_MSM_LINUX_SIZE		0x068e0000

 #define SMI64_MSM_LINUX_BASE_1		0x02000000
 #define SMI64_MSM_LINUX_SIZE_1		0x02000000

 #define SMI64_MSM_LINUX_BASE_2		MSM_EBI_BASE
 #define SMI64_MSM_LINUX_SIZE_2		0x05400000

 #define SMI32_MSM_LINUX_BASE		MSM_EBI_BASE
 #define SMI32_MSM_LINUX_SIZE		0x5400000

 #define SMI32_MSM_PMEM_MDP_BASE	SMI32_MSM_LINUX_BASE + SMI32_MSM_LINUX_SIZE
 #define SMI32_MSM_PMEM_MDP_SIZE	0x800000

 #define SMI32_MSM_PMEM_ADSP_BASE	SMI32_MSM_PMEM_MDP_BASE + SMI32_MSM_PMEM_MDP_SIZE
 #define SMI32_MSM_PMEM_ADSP_SIZE	0x800000

 #define SMI32_MSM_FB_BASE		SMI32_MSM_PMEM_ADSP_BASE + SMI32_MSM_PMEM_ADSP_SIZE
 #define SMI32_MSM_FB_SIZE		0x9b000


 #define MSM_PMEM_GPU1_SIZE	0x800000
 #define MSM_PMEM_GPU1_BASE     (MSM_RAM_CONSOLE_BASE + MSM_RAM_CONSOLE_SIZE)

 #define MSM_RAM_CONSOLE_BASE	0x169E0000
 #define MSM_RAM_CONSOLE_SIZE	128 * SZ_1K

 #if (SMI32_MSM_FB_BASE + SMI32_MSM_FB_SIZE) >= (MSM_PMEM_GPU1_BASE)
 #error invalid memory map
 #endif

 #if (SMI64_MSM_FB_BASE + SMI64_MSM_FB_SIZE) >= (MSM_PMEM_GPU1_BASE)
 #error invalid memory map
 #endif

 #define DECLARE_MSM_IOMAP
 #include <mach/msm_iomap.h>

 /*
 ** SOC GPIO
 */
 #define SAPPHIRE_BALL_UP_0     94
 #define SAPPHIRE_BALL_LEFT_0   18
 #define SAPPHIRE_BALL_DOWN_0   49
 #define SAPPHIRE_BALL_RIGHT_0  19

 #define SAPPHIRE_POWER_KEY     20
 #define SAPPHIRE_VOLUME_UP     36
 #define SAPPHIRE_VOLUME_DOWN   39

 #define SAPPHIRE_GPIO_PS_HOLD   (25)
 #define SAPPHIRE_MDDI_1V5_EN	(28)
 #define SAPPHIRE_BL_PWM			(27)
 #define SAPPHIRE_TP_LS_EN    	(1)
 #define SAPPHIRE20_TP_LS_EN			(88)

 /* H2W */
 #define SAPPHIRE_GPIO_CABLE_IN1		(83)
 #define SAPPHIRE_GPIO_CABLE_IN2		(37)
 #define SAPPHIRE_GPIO_UART3_RX		(86)
 #define SAPPHIRE_GPIO_UART3_TX		(87)
 #define SAPPHIRE_GPIO_H2W_DATA		(86)
 #define SAPPHIRE_GPIO_H2W_CLK		(87)

 #define SAPPHIRE_GPIO_UART1_RTS		(43)
 #define SAPPHIRE_GPIO_UART1_CTS		(44)

 /*
 ** CPLD GPIO
 **
 ** Sapphire Altera CPLD can keep the registers value and
 ** doesn't need a shadow to backup.
 **/
 #define SAPPHIRE_CPLD_BASE   0xFA000000	/* VA */
 #define SAPPHIRE_CPLD_START  0x98000000	/* PA */
 #define SAPPHIRE_CPLD_SIZE   SZ_4K

 #define SAPPHIRE_GPIO_START (128)				/* Pseudo GPIO number */

 /* Sapphire has one INT BANK only. */
 #define SAPPHIRE_GPIO_INT_B0_MASK_REG           (0x0c)	/*INT3 MASK*/
 #define SAPPHIRE_GPIO_INT_B0_STAT_REG           (0x0e)	/*INT1 STATUS*/

 /* LED control register */
 #define SAPPHIRE_CPLD_LED_BASE									(SAPPHIRE_CPLD_BASE + 0x10)		/* VA */
 #define SAPPHIRE_CPLD_LED_START									(SAPPHIRE_CPLD_START + 0x10)	/* PA */
 #define SAPPHIRE_CPLD_LED_SIZE									0x08

 /* MISCn: GPO pin to Enable/Disable some functions. */
 #define SAPPHIRE_GPIO_MISC1_BASE               	(SAPPHIRE_GPIO_START + 0x00)
 #define SAPPHIRE_GPIO_MISC2_BASE               	(SAPPHIRE_GPIO_START + 0x08)
 #define SAPPHIRE_GPIO_MISC3_BASE               	(SAPPHIRE_GPIO_START + 0x10)
 #define SAPPHIRE_GPIO_MISC4_BASE               	(SAPPHIRE_GPIO_START + 0x18)
 #define SAPPHIRE_GPIO_MISC5_BASE               	(SAPPHIRE_GPIO_START + 0x20)

 /* INT BANK0: INT1: int status, INT2: int level, INT3: int Mask */
 #define SAPPHIRE_GPIO_INT_B0_BASE              	(SAPPHIRE_GPIO_START + 0x28)

 /* MISCn GPIO: */
 #define SAPPHIRE_GPIO_CPLD128_VER_0            	(SAPPHIRE_GPIO_MISC1_BASE + 4)
 #define SAPPHIRE_GPIO_CPLD128_VER_1            	(SAPPHIRE_GPIO_MISC1_BASE + 5)
 #define SAPPHIRE_GPIO_CPLD128_VER_2            	(SAPPHIRE_GPIO_MISC1_BASE + 6)
 #define SAPPHIRE_GPIO_CPLD128_VER_3            	(SAPPHIRE_GPIO_MISC1_BASE + 7)

 #define SAPPHIRE_GPIO_H2W_DAT_DIR              	(SAPPHIRE_GPIO_MISC2_BASE + 2)
 #define SAPPHIRE_GPIO_H2W_CLK_DIR              	(SAPPHIRE_GPIO_MISC2_BASE + 3)
 #define SAPPHIRE_GPIO_H2W_SEL0                 	(SAPPHIRE_GPIO_MISC2_BASE + 6)
 #define SAPPHIRE_GPIO_H2W_SEL1                 	(SAPPHIRE_GPIO_MISC2_BASE + 7)

 #define SAPPHIRE_GPIO_I2C_PULL                 	(SAPPHIRE_GPIO_MISC3_BASE + 2)
 #define SAPPHIRE_GPIO_TP_EN                    	(SAPPHIRE_GPIO_MISC3_BASE + 4)
 #define SAPPHIRE_GPIO_JOG_EN                   	(SAPPHIRE_GPIO_MISC3_BASE + 5)
 #define SAPPHIRE_GPIO_JOG_LED_EN               	(SAPPHIRE_GPIO_MISC3_BASE + 6)
 #define SAPPHIRE_GPIO_APKEY_LED_EN             	(SAPPHIRE_GPIO_MISC3_BASE + 7)

 #define SAPPHIRE_GPIO_VCM_PWDN                 	(SAPPHIRE_GPIO_MISC4_BASE + 0)
 #define SAPPHIRE_GPIO_USB_H2W_SW               	(SAPPHIRE_GPIO_MISC4_BASE + 1)
 #define SAPPHIRE_GPIO_COMPASS_RST_N            	(SAPPHIRE_GPIO_MISC4_BASE + 2)
 #define SAPPHIRE_GPIO_USB_PHY_RST_N            	(SAPPHIRE_GPIO_MISC4_BASE + 5)
 #define SAPPHIRE_GPIO_WIFI_PA_RESETX           	(SAPPHIRE_GPIO_MISC4_BASE + 6)
 #define SAPPHIRE_GPIO_WIFI_EN                  	(SAPPHIRE_GPIO_MISC4_BASE + 7)

 #define SAPPHIRE_GPIO_BT_32K_EN                	(SAPPHIRE_GPIO_MISC5_BASE + 0)
 #define SAPPHIRE_GPIO_MAC_32K_EN               	(SAPPHIRE_GPIO_MISC5_BASE + 1)
 #define SAPPHIRE_GPIO_MDDI_32K_EN              	(SAPPHIRE_GPIO_MISC5_BASE + 2)
 #define SAPPHIRE_GPIO_COMPASS_32K_EN           	(SAPPHIRE_GPIO_MISC5_BASE + 3)

 /* INT STATUS/LEVEL/MASK : INT GPIO should be the last. */
 #define SAPPHIRE_GPIO_NAVI_ACT_N           		(SAPPHIRE_GPIO_INT_B0_BASE + 0)
 #define SAPPHIRE_GPIO_COMPASS_IRQ         		(SAPPHIRE_GPIO_INT_B0_BASE + 1)
 #define SAPPHIRE_GPIO_SEARCH_ACT_N			(SAPPHIRE_GPIO_INT_B0_BASE + 2)
 #define SAPPHIRE_GPIO_AUD_HSMIC_DET_N      		(SAPPHIRE_GPIO_INT_B0_BASE + 3)
 #define SAPPHIRE_GPIO_SDMC_CD_N      			(SAPPHIRE_GPIO_INT_B0_BASE + 4)
 #define SAPPHIRE_GPIO_CAM_BTN_STEP1_N          	(SAPPHIRE_GPIO_INT_B0_BASE + 5)
 #define SAPPHIRE_GPIO_CAM_BTN_STEP2_N          	(SAPPHIRE_GPIO_INT_B0_BASE + 6)
 #define SAPPHIRE_GPIO_TP_ATT_N            		(SAPPHIRE_GPIO_INT_B0_BASE + 7)

 #define	SAPPHIRE_GPIO_END						SAPPHIRE_GPIO_TP_ATT_N
 #define	SAPPHIRE_GPIO_LAST_INT					(SAPPHIRE_GPIO_TP_ATT_N)

 /* Bit position in the CPLD MISCn by the CPLD GPIOn: only bit0-7 is used. */
 #define	CPLD_GPIO_BIT_POS_MASK(n)		(1U << ((n) & 7))
 #define	CPLD_GPIO_REG_OFFSET(n)			_g_CPLD_MISCn_Offset[((n)-SAPPHIRE_GPIO_START) >> 3]
 #define	CPLD_GPIO_REG(n)				(CPLD_GPIO_REG_OFFSET(n) + SAPPHIRE_CPLD_BASE)

 /*
 ** CPLD INT Start
 */
 #define SAPPHIRE_INT_START 					(NR_MSM_IRQS + NR_GPIO_IRQS)	/* pseudo number for CPLD INT */
 /* Using INT status/Bank0 for GPIO to INT */
 #define	SAPPHIRE_GPIO_TO_INT(n)				((n-SAPPHIRE_GPIO_INT_B0_BASE) + SAPPHIRE_INT_START)
 #define SAPPHIRE_INT_END 					(SAPPHIRE_GPIO_TO_INT(SAPPHIRE_GPIO_END))

 /* get the INT reg by GPIO number */
 #define	CPLD_INT_GPIO_TO_BANK(n)			(((n)-SAPPHIRE_GPIO_INT_B0_BASE) >> 3)
 #define	CPLD_INT_STATUS_REG_OFFSET_G(n)		_g_INT_BANK_Offset[CPLD_INT_GPIO_TO_BANK(n)][0]
 #define	CPLD_INT_LEVEL_REG_OFFSET_G(n)		_g_INT_BANK_Offset[CPLD_INT_GPIO_TO_BANK(n)][1]
 #define	CPLD_INT_MASK_REG_OFFSET_G(n)		_g_INT_BANK_Offset[CPLD_INT_GPIO_TO_BANK(n)][2]
 #define	CPLD_INT_STATUS_REG_G(n)			(SAPPHIRE_CPLD_BASE + CPLD_INT_STATUS_REG_OFFSET_G(n))
 #define	CPLD_INT_LEVEL_REG_G(n)				(SAPPHIRE_CPLD_BASE + CPLD_INT_LEVEL_REG_OFFSET_G(n))
 #define	CPLD_INT_MASK_REG_G(n)				(SAPPHIRE_CPLD_BASE + CPLD_INT_MASK_REG_OFFSET_G(n))

 /* get the INT reg by INT number */
 #define	CPLD_INT_TO_BANK(i)					((i-SAPPHIRE_INT_START) >> 3)
 #define	CPLD_INT_STATUS_REG_OFFSET(i)		_g_INT_BANK_Offset[CPLD_INT_TO_BANK(i)][0]
 #define	CPLD_INT_LEVEL_REG_OFFSET(i)		_g_INT_BANK_Offset[CPLD_INT_TO_BANK(i)][1]
 #define	CPLD_INT_MASK_REG_OFFSET(i)			_g_INT_BANK_Offset[CPLD_INT_TO_BANK(i)][2]
 #define	CPLD_INT_STATUS_REG(i)				(SAPPHIRE_CPLD_BASE + CPLD_INT_STATUS_REG_OFFSET(i))
 #define	CPLD_INT_LEVEL_REG(i)				(SAPPHIRE_CPLD_BASE + CPLD_INT_LEVEL_REG_OFFSET(i))
 #define	CPLD_INT_MASK_REG(i)				(SAPPHIRE_CPLD_BASE + CPLD_INT_MASK_REG_OFFSET(i) )

 /* return the bit mask by INT number */
 #define SAPPHIRE_INT_BIT_MASK(i) 			(1U << ((i - SAPPHIRE_INT_START) & 7))

 void config_sapphire_camera_on_gpios(void);
 void config_sapphire_camera_off_gpios(void);
 int sapphire_get_smi_size(void);
 unsigned int sapphire_get_hwid(void);
 unsigned int sapphire_get_skuid(void);
 unsigned int is_12pin_camera(void);
 int sapphire_is_5M_camera(void);
 int sapphire_gpio_write(struct gpio_chip *chip, unsigned n, unsigned on);

 #endif /* GUARD */
	/* linux/arch/arm/mach-msm/board-sapphire.h
	* Copyright (C) 2007-2009 HTC Corporation.
	* Author: Thomas Tsai <thomas_tsai@htc.com>
	*
	* This software is licensed under the terms of the GNU General Public
	* License version 2, as published by the Free Software Foundation, and
	* may be copied, distributed, and modified under those terms.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*/
	#ifndef __ARCH_ARM_MACH_MSM_BOARD_SAPPHIRE_H
	#define __ARCH_ARM_MACH_MSM_BOARD_SAPPHIRE_H

	#include <mach/board.h>

	#define MSM_SMI_BASE 0x00000000
	#define MSM_SMI_SIZE 0x00800000

	#define MSM_EBI_BASE 0x10000000
	#define MSM_EBI_SIZE 0x07100000

	#define MSM_PMEM_GPU0_BASE 0x00000000
	#define MSM_PMEM_GPU0_SIZE 0x00700000

	#define SMI64_MSM_PMEM_MDP_BASE 0x15900000
	#define SMI64_MSM_PMEM_MDP_SIZE 0x00800000

	#define SMI64_MSM_PMEM_ADSP_BASE 0x16100000
	#define SMI64_MSM_PMEM_ADSP_SIZE 0x00800000

	#define SMI64_MSM_PMEM_CAMERA_BASE 0x15400000
	#define SMI64_MSM_PMEM_CAMERA_SIZE 0x00500000

	#define SMI64_MSM_FB_BASE 0x00700000
	#define SMI64_MSM_FB_SIZE 0x00100000

	#define SMI64_MSM_LINUX_BASE MSM_EBI_BASE
	#define SMI64_MSM_LINUX_SIZE 0x068e0000

	#define SMI64_MSM_LINUX_BASE_1 0x02000000
	#define SMI64_MSM_LINUX_SIZE_1 0x02000000

	#define SMI64_MSM_LINUX_BASE_2 MSM_EBI_BASE
	#define SMI64_MSM_LINUX_SIZE_2 0x05400000

	#define SMI32_MSM_LINUX_BASE MSM_EBI_BASE
	#define SMI32_MSM_LINUX_SIZE 0x5400000

	#define SMI32_MSM_PMEM_MDP_BASE SMI32_MSM_LINUX_BASE + SMI32_MSM_LINUX_SIZE
	#define SMI32_MSM_PMEM_MDP_SIZE 0x800000

	#define SMI32_MSM_PMEM_ADSP_BASE SMI32_MSM_PMEM_MDP_BASE + SMI32_MSM_PMEM_MDP_SIZE
	#define SMI32_MSM_PMEM_ADSP_SIZE 0x800000

	#define SMI32_MSM_FB_BASE SMI32_MSM_PMEM_ADSP_BASE + SMI32_MSM_PMEM_ADSP_SIZE
	#define SMI32_MSM_FB_SIZE 0x9b000


	#define MSM_PMEM_GPU1_SIZE 0x800000
	#define MSM_PMEM_GPU1_BASE (MSM_RAM_CONSOLE_BASE + MSM_RAM_CONSOLE_SIZE)

	#define MSM_RAM_CONSOLE_BASE 0x169E0000
	#define MSM_RAM_CONSOLE_SIZE 128 * SZ_1K

	#if (SMI32_MSM_FB_BASE + SMI32_MSM_FB_SIZE) >= (MSM_PMEM_GPU1_BASE)
	#error invalid memory map
	#endif

	#if (SMI64_MSM_FB_BASE + SMI64_MSM_FB_SIZE) >= (MSM_PMEM_GPU1_BASE)
	#error invalid memory map
	#endif

	#define DECLARE_MSM_IOMAP
	#include <mach/msm_iomap.h>

	/*
	** SOC GPIO
	*/
	#define SAPPHIRE_BALL_UP_0 94
	#define SAPPHIRE_BALL_LEFT_0 18
	#define SAPPHIRE_BALL_DOWN_0 49
	#define SAPPHIRE_BALL_RIGHT_0 19

	#define SAPPHIRE_POWER_KEY 20
	#define SAPPHIRE_VOLUME_UP 36
	#define SAPPHIRE_VOLUME_DOWN 39

	#define SAPPHIRE_GPIO_PS_HOLD (25)
	#define SAPPHIRE_MDDI_1V5_EN (28)
	#define SAPPHIRE_BL_PWM (27)
	#define SAPPHIRE_TP_LS_EN (1)
	#define SAPPHIRE20_TP_LS_EN (88)

	/* H2W */
	#define SAPPHIRE_GPIO_CABLE_IN1 (83)
	#define SAPPHIRE_GPIO_CABLE_IN2 (37)
	#define SAPPHIRE_GPIO_UART3_RX (86)
	#define SAPPHIRE_GPIO_UART3_TX (87)
	#define SAPPHIRE_GPIO_H2W_DATA (86)
	#define SAPPHIRE_GPIO_H2W_CLK (87)

	#define SAPPHIRE_GPIO_UART1_RTS (43)
	#define SAPPHIRE_GPIO_UART1_CTS (44)

	/*
	** CPLD GPIO
	**
	** Sapphire Altera CPLD can keep the registers value and
	** doesn't need a shadow to backup.
	**/
	#define SAPPHIRE_CPLD_BASE 0xFA000000 /* VA */
	#define SAPPHIRE_CPLD_START 0x98000000 /* PA */
	#define SAPPHIRE_CPLD_SIZE SZ_4K

	#define SAPPHIRE_GPIO_START (128) /* Pseudo GPIO number */

	/* Sapphire has one INT BANK only. */
	#define SAPPHIRE_GPIO_INT_B0_MASK_REG (0x0c) /INT3 MASK/
	#define SAPPHIRE_GPIO_INT_B0_STAT_REG (0x0e) /INT1 STATUS/

	/* LED control register */
	#define SAPPHIRE_CPLD_LED_BASE (SAPPHIRE_CPLD_BASE + 0x10) /* VA */
	#define SAPPHIRE_CPLD_LED_START (SAPPHIRE_CPLD_START + 0x10) /* PA */
	#define SAPPHIRE_CPLD_LED_SIZE 0x08

	/* MISCn: GPO pin to Enable/Disable some functions. */
	#define SAPPHIRE_GPIO_MISC1_BASE (SAPPHIRE_GPIO_START + 0x00)
	#define SAPPHIRE_GPIO_MISC2_BASE (SAPPHIRE_GPIO_START + 0x08)
	#define SAPPHIRE_GPIO_MISC3_BASE (SAPPHIRE_GPIO_START + 0x10)
	#define SAPPHIRE_GPIO_MISC4_BASE (SAPPHIRE_GPIO_START + 0x18)
	#define SAPPHIRE_GPIO_MISC5_BASE (SAPPHIRE_GPIO_START + 0x20)

	/* INT BANK0: INT1: int status, INT2: int level, INT3: int Mask */
	#define SAPPHIRE_GPIO_INT_B0_BASE (SAPPHIRE_GPIO_START + 0x28)

	/* MISCn GPIO: */
	#define SAPPHIRE_GPIO_CPLD128_VER_0 (SAPPHIRE_GPIO_MISC1_BASE + 4)
	#define SAPPHIRE_GPIO_CPLD128_VER_1 (SAPPHIRE_GPIO_MISC1_BASE + 5)
	#define SAPPHIRE_GPIO_CPLD128_VER_2 (SAPPHIRE_GPIO_MISC1_BASE + 6)
	#define SAPPHIRE_GPIO_CPLD128_VER_3 (SAPPHIRE_GPIO_MISC1_BASE + 7)

	#define SAPPHIRE_GPIO_H2W_DAT_DIR (SAPPHIRE_GPIO_MISC2_BASE + 2)
	#define SAPPHIRE_GPIO_H2W_CLK_DIR (SAPPHIRE_GPIO_MISC2_BASE + 3)
	#define SAPPHIRE_GPIO_H2W_SEL0 (SAPPHIRE_GPIO_MISC2_BASE + 6)
	#define SAPPHIRE_GPIO_H2W_SEL1 (SAPPHIRE_GPIO_MISC2_BASE + 7)

	#define SAPPHIRE_GPIO_I2C_PULL (SAPPHIRE_GPIO_MISC3_BASE + 2)
	#define SAPPHIRE_GPIO_TP_EN (SAPPHIRE_GPIO_MISC3_BASE + 4)
	#define SAPPHIRE_GPIO_JOG_EN (SAPPHIRE_GPIO_MISC3_BASE + 5)
	#define SAPPHIRE_GPIO_JOG_LED_EN (SAPPHIRE_GPIO_MISC3_BASE + 6)
	#define SAPPHIRE_GPIO_APKEY_LED_EN (SAPPHIRE_GPIO_MISC3_BASE + 7)

	#define SAPPHIRE_GPIO_VCM_PWDN (SAPPHIRE_GPIO_MISC4_BASE + 0)
	#define SAPPHIRE_GPIO_USB_H2W_SW (SAPPHIRE_GPIO_MISC4_BASE + 1)
	#define SAPPHIRE_GPIO_COMPASS_RST_N (SAPPHIRE_GPIO_MISC4_BASE + 2)
	#define SAPPHIRE_GPIO_USB_PHY_RST_N (SAPPHIRE_GPIO_MISC4_BASE + 5)
	#define SAPPHIRE_GPIO_WIFI_PA_RESETX (SAPPHIRE_GPIO_MISC4_BASE + 6)
	#define SAPPHIRE_GPIO_WIFI_EN (SAPPHIRE_GPIO_MISC4_BASE + 7)

	#define SAPPHIRE_GPIO_BT_32K_EN (SAPPHIRE_GPIO_MISC5_BASE + 0)
	#define SAPPHIRE_GPIO_MAC_32K_EN (SAPPHIRE_GPIO_MISC5_BASE + 1)
	#define SAPPHIRE_GPIO_MDDI_32K_EN (SAPPHIRE_GPIO_MISC5_BASE + 2)
	#define SAPPHIRE_GPIO_COMPASS_32K_EN (SAPPHIRE_GPIO_MISC5_BASE + 3)

	/* INT STATUS/LEVEL/MASK : INT GPIO should be the last. */
	#define SAPPHIRE_GPIO_NAVI_ACT_N (SAPPHIRE_GPIO_INT_B0_BASE + 0)
	#define SAPPHIRE_GPIO_COMPASS_IRQ (SAPPHIRE_GPIO_INT_B0_BASE + 1)
	#define SAPPHIRE_GPIO_SEARCH_ACT_N (SAPPHIRE_GPIO_INT_B0_BASE + 2)
	#define SAPPHIRE_GPIO_AUD_HSMIC_DET_N (SAPPHIRE_GPIO_INT_B0_BASE + 3)
	#define SAPPHIRE_GPIO_SDMC_CD_N (SAPPHIRE_GPIO_INT_B0_BASE + 4)
	#define SAPPHIRE_GPIO_CAM_BTN_STEP1_N (SAPPHIRE_GPIO_INT_B0_BASE + 5)
	#define SAPPHIRE_GPIO_CAM_BTN_STEP2_N (SAPPHIRE_GPIO_INT_B0_BASE + 6)
	#define SAPPHIRE_GPIO_TP_ATT_N (SAPPHIRE_GPIO_INT_B0_BASE + 7)

	#define SAPPHIRE_GPIO_END SAPPHIRE_GPIO_TP_ATT_N
	#define SAPPHIRE_GPIO_LAST_INT (SAPPHIRE_GPIO_TP_ATT_N)

	/* Bit position in the CPLD MISCn by the CPLD GPIOn: only bit0-7 is used. */
	#define CPLD_GPIO_BIT_POS_MASK(n) (1U << ((n) & 7))
	#define CPLD_GPIO_REG_OFFSET(n) _g_CPLD_MISCn_Offset[((n)-SAPPHIRE_GPIO_START) >> 3]
	#define CPLD_GPIO_REG(n) (CPLD_GPIO_REG_OFFSET(n) + SAPPHIRE_CPLD_BASE)

	/*
	** CPLD INT Start
	*/
	#define SAPPHIRE_INT_START (NR_MSM_IRQS + NR_GPIO_IRQS) /* pseudo number for CPLD INT */
	/* Using INT status/Bank0 for GPIO to INT */
	#define SAPPHIRE_GPIO_TO_INT(n) ((n-SAPPHIRE_GPIO_INT_B0_BASE) + SAPPHIRE_INT_START)
	#define SAPPHIRE_INT_END (SAPPHIRE_GPIO_TO_INT(SAPPHIRE_GPIO_END))

	/* get the INT reg by GPIO number */
	#define CPLD_INT_GPIO_TO_BANK(n) (((n)-SAPPHIRE_GPIO_INT_B0_BASE) >> 3)
	#define CPLD_INT_STATUS_REG_OFFSET_G(n) _g_INT_BANK_Offset[CPLD_INT_GPIO_TO_BANK(n)][0]
	#define CPLD_INT_LEVEL_REG_OFFSET_G(n) _g_INT_BANK_Offset[CPLD_INT_GPIO_TO_BANK(n)][1]
	#define CPLD_INT_MASK_REG_OFFSET_G(n) _g_INT_BANK_Offset[CPLD_INT_GPIO_TO_BANK(n)][2]
	#define CPLD_INT_STATUS_REG_G(n) (SAPPHIRE_CPLD_BASE + CPLD_INT_STATUS_REG_OFFSET_G(n))
	#define CPLD_INT_LEVEL_REG_G(n) (SAPPHIRE_CPLD_BASE + CPLD_INT_LEVEL_REG_OFFSET_G(n))
	#define CPLD_INT_MASK_REG_G(n) (SAPPHIRE_CPLD_BASE + CPLD_INT_MASK_REG_OFFSET_G(n))

	/* get the INT reg by INT number */
	#define CPLD_INT_TO_BANK(i) ((i-SAPPHIRE_INT_START) >> 3)
	#define CPLD_INT_STATUS_REG_OFFSET(i) _g_INT_BANK_Offset[CPLD_INT_TO_BANK(i)][0]
	#define CPLD_INT_LEVEL_REG_OFFSET(i) _g_INT_BANK_Offset[CPLD_INT_TO_BANK(i)][1]
	#define CPLD_INT_MASK_REG_OFFSET(i) _g_INT_BANK_Offset[CPLD_INT_TO_BANK(i)][2]
	#define CPLD_INT_STATUS_REG(i) (SAPPHIRE_CPLD_BASE + CPLD_INT_STATUS_REG_OFFSET(i))
	#define CPLD_INT_LEVEL_REG(i) (SAPPHIRE_CPLD_BASE + CPLD_INT_LEVEL_REG_OFFSET(i))
	#define CPLD_INT_MASK_REG(i) (SAPPHIRE_CPLD_BASE + CPLD_INT_MASK_REG_OFFSET(i) )

	/* return the bit mask by INT number */
	#define SAPPHIRE_INT_BIT_MASK(i) (1U << ((i - SAPPHIRE_INT_START) & 7))

	void config_sapphire_camera_on_gpios(void);
	void config_sapphire_camera_off_gpios(void);
	int sapphire_get_smi_size(void);
	unsigned int sapphire_get_hwid(void);
	unsigned int sapphire_get_skuid(void);
	unsigned int is_12pin_camera(void);
	int sapphire_is_5M_camera(void);
	int sapphire_gpio_write(struct gpio_chip *chip, unsigned n, unsigned on);

	#endif /* GUARD */