| /* Copyright (c) 2009-2011, Code Aurora Forum. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/kernel.h> |
| #include <linux/interrupt.h> |
| #include <linux/slab.h> |
| #include <linux/input.h> |
| #include <linux/bitops.h> |
| #include <linux/delay.h> |
| #include <linux/mutex.h> |
| |
| #include <linux/mfd/pm8xxx/core.h> |
| #include <linux/mfd/pm8xxx/gpio.h> |
| #include <linux/input/pmic8xxx-keypad.h> |
| |
| #define PM8XXX_MAX_ROWS 18 |
| #define PM8XXX_MAX_COLS 8 |
| #define PM8XXX_ROW_SHIFT 3 |
| #define PM8XXX_MATRIX_MAX_SIZE (PM8XXX_MAX_ROWS * PM8XXX_MAX_COLS) |
| |
| #define PM8XXX_MIN_ROWS 5 |
| #define PM8XXX_MIN_COLS 5 |
| |
| #define MAX_SCAN_DELAY 128 |
| #define MIN_SCAN_DELAY 1 |
| |
| /* in nanoseconds */ |
| #define MAX_ROW_HOLD_DELAY 122000 |
| #define MIN_ROW_HOLD_DELAY 30500 |
| |
| #define MAX_DEBOUNCE_TIME 20 |
| #define MIN_DEBOUNCE_TIME 5 |
| |
| #define KEYP_CTRL 0x148 |
| |
| #define KEYP_CTRL_EVNTS BIT(0) |
| #define KEYP_CTRL_EVNTS_MASK 0x3 |
| |
| #define KEYP_CTRL_SCAN_COLS_SHIFT 5 |
| #define KEYP_CTRL_SCAN_COLS_MIN 5 |
| #define KEYP_CTRL_SCAN_COLS_BITS 0x3 |
| |
| #define KEYP_CTRL_SCAN_ROWS_SHIFT 2 |
| #define KEYP_CTRL_SCAN_ROWS_MIN 5 |
| #define KEYP_CTRL_SCAN_ROWS_BITS 0x7 |
| |
| #define KEYP_CTRL_KEYP_EN BIT(7) |
| |
| #define KEYP_SCAN 0x149 |
| |
| #define KEYP_SCAN_READ_STATE BIT(0) |
| #define KEYP_SCAN_DBOUNCE_SHIFT 1 |
| #define KEYP_SCAN_PAUSE_SHIFT 3 |
| #define KEYP_SCAN_ROW_HOLD_SHIFT 6 |
| |
| #define KEYP_TEST 0x14A |
| |
| #define KEYP_TEST_CLEAR_RECENT_SCAN BIT(6) |
| #define KEYP_TEST_CLEAR_OLD_SCAN BIT(5) |
| #define KEYP_TEST_READ_RESET BIT(4) |
| #define KEYP_TEST_DTEST_EN BIT(3) |
| #define KEYP_TEST_ABORT_READ BIT(0) |
| |
| #define KEYP_TEST_DBG_SELECT_SHIFT 1 |
| |
| /* bits of these registers represent |
| * '0' for key press |
| * '1' for key release |
| */ |
| #define KEYP_RECENT_DATA 0x14B |
| #define KEYP_OLD_DATA 0x14C |
| |
| #define KEYP_CLOCK_FREQ 32768 |
| |
| /** |
| * struct pmic8xxx_kp - internal keypad data structure |
| * @pdata - keypad platform data pointer |
| * @input - input device pointer for keypad |
| * @key_sense_irq - key press/release irq number |
| * @key_stuck_irq - key stuck notification irq number |
| * @keycodes - array to hold the key codes |
| * @dev - parent device pointer |
| * @keystate - present key press/release state |
| * @stuckstate - present state when key stuck irq |
| * @ctrl_reg - control register value |
| */ |
| struct pmic8xxx_kp { |
| const struct pm8xxx_keypad_platform_data *pdata; |
| struct input_dev *input; |
| int key_sense_irq; |
| int key_stuck_irq; |
| |
| unsigned short keycodes[PM8XXX_MATRIX_MAX_SIZE]; |
| |
| struct device *dev; |
| u16 keystate[PM8XXX_MAX_ROWS]; |
| u16 stuckstate[PM8XXX_MAX_ROWS]; |
| |
| u8 ctrl_reg; |
| }; |
| |
| static int pmic8xxx_kp_write_u8(struct pmic8xxx_kp *kp, |
| u8 data, u16 reg) |
| { |
| int rc; |
| |
| rc = pm8xxx_writeb(kp->dev->parent, reg, data); |
| if (rc < 0) |
| dev_warn(kp->dev, "Error writing pmic8xxx: %X - ret %X\n", |
| reg, rc); |
| return rc; |
| } |
| |
| static int pmic8xxx_kp_read(struct pmic8xxx_kp *kp, |
| u8 *data, u16 reg, unsigned num_bytes) |
| { |
| int rc; |
| |
| rc = pm8xxx_read_buf(kp->dev->parent, reg, data, num_bytes); |
| if (rc < 0) |
| dev_warn(kp->dev, "Error reading pmic8xxx: %X - ret %X\n", |
| reg, rc); |
| |
| return rc; |
| } |
| |
| static int pmic8xxx_kp_read_u8(struct pmic8xxx_kp *kp, |
| u8 *data, u16 reg) |
| { |
| int rc; |
| |
| rc = pmic8xxx_kp_read(kp, data, reg, 1); |
| if (rc < 0) |
| dev_warn(kp->dev, "Error reading pmic8xxx: %X - ret %X\n", |
| reg, rc); |
| return rc; |
| } |
| |
| static u8 pmic8xxx_col_state(struct pmic8xxx_kp *kp, u8 col) |
| { |
| /* all keys pressed on that particular row? */ |
| if (col == 0x00) |
| return 1 << kp->pdata->num_cols; |
| else |
| return col & ((1 << kp->pdata->num_cols) - 1); |
| } |
| |
| /* |
| * Synchronous read protocol for RevB0 onwards: |
| * |
| * 1. Write '1' to ReadState bit in KEYP_SCAN register |
| * 2. Wait 2*32KHz clocks, so that HW can successfully enter read mode |
| * synchronously |
| * 3. Read rows in old array first if events are more than one |
| * 4. Read rows in recent array |
| * 5. Wait 4*32KHz clocks |
| * 6. Write '0' to ReadState bit of KEYP_SCAN register so that hw can |
| * synchronously exit read mode. |
| */ |
| static int pmic8xxx_chk_sync_read(struct pmic8xxx_kp *kp) |
| { |
| int rc; |
| u8 scan_val; |
| |
| rc = pmic8xxx_kp_read_u8(kp, &scan_val, KEYP_SCAN); |
| if (rc < 0) { |
| dev_err(kp->dev, "Error reading KEYP_SCAN reg, rc=%d\n", rc); |
| return rc; |
| } |
| |
| scan_val |= 0x1; |
| |
| rc = pmic8xxx_kp_write_u8(kp, scan_val, KEYP_SCAN); |
| if (rc < 0) { |
| dev_err(kp->dev, "Error writing KEYP_SCAN reg, rc=%d\n", rc); |
| return rc; |
| } |
| |
| /* 2 * 32KHz clocks */ |
| udelay((2 * DIV_ROUND_UP(USEC_PER_SEC, KEYP_CLOCK_FREQ)) + 1); |
| |
| return rc; |
| } |
| |
| static int pmic8xxx_kp_read_data(struct pmic8xxx_kp *kp, u16 *state, |
| u16 data_reg, int read_rows) |
| { |
| int rc, row; |
| u8 new_data[PM8XXX_MAX_ROWS]; |
| |
| rc = pmic8xxx_kp_read(kp, new_data, data_reg, read_rows); |
| if (rc) |
| return rc; |
| |
| for (row = 0; row < kp->pdata->num_rows; row++) { |
| dev_dbg(kp->dev, "new_data[%d] = %d\n", row, |
| new_data[row]); |
| state[row] = pmic8xxx_col_state(kp, new_data[row]); |
| } |
| |
| return rc; |
| } |
| |
| static int pmic8xxx_kp_read_matrix(struct pmic8xxx_kp *kp, u16 *new_state, |
| u16 *old_state) |
| { |
| int rc, read_rows; |
| u8 scan_val; |
| |
| if (kp->pdata->num_rows < PM8XXX_MIN_ROWS) |
| read_rows = PM8XXX_MIN_ROWS; |
| else |
| read_rows = kp->pdata->num_rows; |
| |
| pmic8xxx_chk_sync_read(kp); |
| |
| if (old_state) { |
| rc = pmic8xxx_kp_read_data(kp, old_state, KEYP_OLD_DATA, |
| read_rows); |
| if (rc < 0) { |
| dev_err(kp->dev, |
| "Error reading KEYP_OLD_DATA, rc=%d\n", rc); |
| return rc; |
| } |
| } |
| |
| rc = pmic8xxx_kp_read_data(kp, new_state, KEYP_RECENT_DATA, |
| read_rows); |
| if (rc < 0) { |
| dev_err(kp->dev, |
| "Error reading KEYP_RECENT_DATA, rc=%d\n", rc); |
| return rc; |
| } |
| |
| /* 4 * 32KHz clocks */ |
| udelay((4 * DIV_ROUND_UP(USEC_PER_SEC, KEYP_CLOCK_FREQ)) + 1); |
| |
| rc = pmic8xxx_kp_read_u8(kp, &scan_val, KEYP_SCAN); |
| if (rc < 0) { |
| dev_err(kp->dev, "Error reading KEYP_SCAN reg, rc=%d\n", rc); |
| return rc; |
| } |
| |
| scan_val &= 0xFE; |
| rc = pmic8xxx_kp_write_u8(kp, scan_val, KEYP_SCAN); |
| if (rc < 0) |
| dev_err(kp->dev, "Error writing KEYP_SCAN reg, rc=%d\n", rc); |
| |
| return rc; |
| } |
| |
| static void __pmic8xxx_kp_scan_matrix(struct pmic8xxx_kp *kp, u16 *new_state, |
| u16 *old_state) |
| { |
| int row, col, code; |
| |
| for (row = 0; row < kp->pdata->num_rows; row++) { |
| int bits_changed = new_state[row] ^ old_state[row]; |
| |
| if (!bits_changed) |
| continue; |
| |
| for (col = 0; col < kp->pdata->num_cols; col++) { |
| if (!(bits_changed & (1 << col))) |
| continue; |
| |
| dev_dbg(kp->dev, "key [%d:%d] %s\n", row, col, |
| !(new_state[row] & (1 << col)) ? |
| "pressed" : "released"); |
| |
| code = MATRIX_SCAN_CODE(row, col, PM8XXX_ROW_SHIFT); |
| |
| input_event(kp->input, EV_MSC, MSC_SCAN, code); |
| input_report_key(kp->input, |
| kp->keycodes[code], |
| !(new_state[row] & (1 << col))); |
| |
| input_sync(kp->input); |
| } |
| } |
| } |
| |
| static bool pmic8xxx_detect_ghost_keys(struct pmic8xxx_kp *kp, u16 *new_state) |
| { |
| int row, found_first = -1; |
| u16 check, row_state; |
| |
| check = 0; |
| for (row = 0; row < kp->pdata->num_rows; row++) { |
| row_state = (~new_state[row]) & |
| ((1 << kp->pdata->num_cols) - 1); |
| |
| if (hweight16(row_state) > 1) { |
| if (found_first == -1) |
| found_first = row; |
| if (check & row_state) { |
| dev_dbg(kp->dev, "detected ghost key on row[%d]" |
| " and row[%d]\n", found_first, row); |
| return true; |
| } |
| } |
| check |= row_state; |
| } |
| return false; |
| } |
| |
| static int pmic8xxx_kp_scan_matrix(struct pmic8xxx_kp *kp, unsigned int events) |
| { |
| u16 new_state[PM8XXX_MAX_ROWS]; |
| u16 old_state[PM8XXX_MAX_ROWS]; |
| int rc; |
| |
| switch (events) { |
| case 0x1: |
| rc = pmic8xxx_kp_read_matrix(kp, new_state, NULL); |
| if (rc < 0) |
| return rc; |
| |
| /* detecting ghost key is not an error */ |
| if (pmic8xxx_detect_ghost_keys(kp, new_state)) |
| return 0; |
| __pmic8xxx_kp_scan_matrix(kp, new_state, kp->keystate); |
| memcpy(kp->keystate, new_state, sizeof(new_state)); |
| break; |
| case 0x3: /* two events - eventcounter is gray-coded */ |
| rc = pmic8xxx_kp_read_matrix(kp, new_state, old_state); |
| if (rc < 0) |
| return rc; |
| |
| __pmic8xxx_kp_scan_matrix(kp, old_state, kp->keystate); |
| __pmic8xxx_kp_scan_matrix(kp, new_state, old_state); |
| memcpy(kp->keystate, new_state, sizeof(new_state)); |
| break; |
| case 0x2: |
| dev_dbg(kp->dev, "Some key events were lost\n"); |
| rc = pmic8xxx_kp_read_matrix(kp, new_state, old_state); |
| if (rc < 0) |
| return rc; |
| __pmic8xxx_kp_scan_matrix(kp, old_state, kp->keystate); |
| __pmic8xxx_kp_scan_matrix(kp, new_state, old_state); |
| memcpy(kp->keystate, new_state, sizeof(new_state)); |
| break; |
| default: |
| rc = -EINVAL; |
| } |
| return rc; |
| } |
| |
| /* |
| * NOTE: We are reading recent and old data registers blindly |
| * whenever key-stuck interrupt happens, because events counter doesn't |
| * get updated when this interrupt happens due to key stuck doesn't get |
| * considered as key state change. |
| * |
| * We are not using old data register contents after they are being read |
| * because it might report the key which was pressed before the key being stuck |
| * as stuck key because it's pressed status is stored in the old data |
| * register. |
| */ |
| static irqreturn_t pmic8xxx_kp_stuck_irq(int irq, void *data) |
| { |
| u16 new_state[PM8XXX_MAX_ROWS]; |
| u16 old_state[PM8XXX_MAX_ROWS]; |
| int rc; |
| struct pmic8xxx_kp *kp = data; |
| |
| rc = pmic8xxx_kp_read_matrix(kp, new_state, old_state); |
| if (rc < 0) { |
| dev_err(kp->dev, "failed to read keypad matrix\n"); |
| return IRQ_HANDLED; |
| } |
| |
| __pmic8xxx_kp_scan_matrix(kp, new_state, kp->stuckstate); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t pmic8xxx_kp_irq(int irq, void *data) |
| { |
| struct pmic8xxx_kp *kp = data; |
| u8 ctrl_val, events; |
| int rc; |
| |
| rc = pmic8xxx_kp_read(kp, &ctrl_val, KEYP_CTRL, 1); |
| if (rc < 0) { |
| dev_err(kp->dev, "failed to read keyp_ctrl register\n"); |
| return IRQ_HANDLED; |
| } |
| |
| events = ctrl_val & KEYP_CTRL_EVNTS_MASK; |
| |
| rc = pmic8xxx_kp_scan_matrix(kp, events); |
| if (rc < 0) |
| dev_err(kp->dev, "failed to scan matrix\n"); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int __devinit pmic8xxx_kpd_init(struct pmic8xxx_kp *kp) |
| { |
| int bits, rc, cycles; |
| u8 scan_val = 0, ctrl_val = 0; |
| static const u8 row_bits[] = { |
| 0, 1, 2, 3, 4, 4, 5, 5, 6, 6, 6, 7, 7, 7, |
| }; |
| |
| /* Find column bits */ |
| if (kp->pdata->num_cols < KEYP_CTRL_SCAN_COLS_MIN) |
| bits = 0; |
| else |
| bits = kp->pdata->num_cols - KEYP_CTRL_SCAN_COLS_MIN; |
| ctrl_val = (bits & KEYP_CTRL_SCAN_COLS_BITS) << |
| KEYP_CTRL_SCAN_COLS_SHIFT; |
| |
| /* Find row bits */ |
| if (kp->pdata->num_rows < KEYP_CTRL_SCAN_ROWS_MIN) |
| bits = 0; |
| else |
| bits = row_bits[kp->pdata->num_rows - KEYP_CTRL_SCAN_ROWS_MIN]; |
| |
| ctrl_val |= (bits << KEYP_CTRL_SCAN_ROWS_SHIFT); |
| |
| rc = pmic8xxx_kp_write_u8(kp, ctrl_val, KEYP_CTRL); |
| if (rc < 0) { |
| dev_err(kp->dev, "Error writing KEYP_CTRL reg, rc=%d\n", rc); |
| return rc; |
| } |
| |
| bits = (kp->pdata->debounce_ms / 5) - 1; |
| |
| scan_val |= (bits << KEYP_SCAN_DBOUNCE_SHIFT); |
| |
| bits = fls(kp->pdata->scan_delay_ms) - 1; |
| scan_val |= (bits << KEYP_SCAN_PAUSE_SHIFT); |
| |
| /* Row hold time is a multiple of 32KHz cycles. */ |
| cycles = (kp->pdata->row_hold_ns * KEYP_CLOCK_FREQ) / NSEC_PER_SEC; |
| |
| scan_val |= (cycles << KEYP_SCAN_ROW_HOLD_SHIFT); |
| |
| rc = pmic8xxx_kp_write_u8(kp, scan_val, KEYP_SCAN); |
| if (rc) |
| dev_err(kp->dev, "Error writing KEYP_SCAN reg, rc=%d\n", rc); |
| |
| return rc; |
| |
| } |
| |
| static int __devinit pmic8xxx_kp_config_gpio(int gpio_start, int num_gpios, |
| struct pmic8xxx_kp *kp, struct pm_gpio *gpio_config) |
| { |
| int rc, i; |
| |
| if (gpio_start < 0 || num_gpios < 0) |
| return -EINVAL; |
| |
| for (i = 0; i < num_gpios; i++) { |
| rc = pm8xxx_gpio_config(gpio_start + i, gpio_config); |
| if (rc) { |
| dev_err(kp->dev, "%s: FAIL pm8xxx_gpio_config():" |
| "for PM GPIO [%d] rc=%d.\n", |
| __func__, gpio_start + i, rc); |
| return rc; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int pmic8xxx_kp_enable(struct pmic8xxx_kp *kp) |
| { |
| int rc; |
| |
| kp->ctrl_reg |= KEYP_CTRL_KEYP_EN; |
| |
| rc = pmic8xxx_kp_write_u8(kp, kp->ctrl_reg, KEYP_CTRL); |
| if (rc < 0) |
| dev_err(kp->dev, "Error writing KEYP_CTRL reg, rc=%d\n", rc); |
| |
| return rc; |
| } |
| |
| static int pmic8xxx_kp_disable(struct pmic8xxx_kp *kp) |
| { |
| int rc; |
| |
| kp->ctrl_reg &= ~KEYP_CTRL_KEYP_EN; |
| |
| rc = pmic8xxx_kp_write_u8(kp, kp->ctrl_reg, KEYP_CTRL); |
| if (rc < 0) |
| return rc; |
| |
| return rc; |
| } |
| |
| static int pmic8xxx_kp_open(struct input_dev *dev) |
| { |
| struct pmic8xxx_kp *kp = input_get_drvdata(dev); |
| |
| return pmic8xxx_kp_enable(kp); |
| } |
| |
| static void pmic8xxx_kp_close(struct input_dev *dev) |
| { |
| struct pmic8xxx_kp *kp = input_get_drvdata(dev); |
| |
| pmic8xxx_kp_disable(kp); |
| } |
| |
| /* |
| * keypad controller should be initialized in the following sequence |
| * only, otherwise it might get into FSM stuck state. |
| * |
| * - Initialize keypad control parameters, like no. of rows, columns, |
| * timing values etc., |
| * - configure rows and column gpios pull up/down. |
| * - set irq edge type. |
| * - enable the keypad controller. |
| */ |
| static int __devinit pmic8xxx_kp_probe(struct platform_device *pdev) |
| { |
| const struct pm8xxx_keypad_platform_data *pdata = |
| dev_get_platdata(&pdev->dev); |
| const struct matrix_keymap_data *keymap_data; |
| struct pmic8xxx_kp *kp; |
| int rc; |
| u8 ctrl_val; |
| |
| struct pm_gpio kypd_drv = { |
| .direction = PM_GPIO_DIR_OUT, |
| .output_buffer = PM_GPIO_OUT_BUF_OPEN_DRAIN, |
| .output_value = 0, |
| .pull = PM_GPIO_PULL_NO, |
| .vin_sel = PM_GPIO_VIN_S4, |
| .out_strength = PM_GPIO_STRENGTH_LOW, |
| .function = PM_GPIO_FUNC_1, |
| .inv_int_pol = 1, |
| }; |
| |
| struct pm_gpio kypd_sns = { |
| .direction = PM_GPIO_DIR_IN, |
| .pull = PM_GPIO_PULL_UP_31P5, |
| .vin_sel = PM_GPIO_VIN_S4, |
| .out_strength = PM_GPIO_STRENGTH_NO, |
| .function = PM_GPIO_FUNC_NORMAL, |
| .inv_int_pol = 1, |
| }; |
| |
| |
| if (!pdata || !pdata->num_cols || !pdata->num_rows || |
| pdata->num_cols > PM8XXX_MAX_COLS || |
| pdata->num_rows > PM8XXX_MAX_ROWS || |
| pdata->num_cols < PM8XXX_MIN_COLS) { |
| dev_err(&pdev->dev, "invalid platform data\n"); |
| return -EINVAL; |
| } |
| |
| if (!pdata->scan_delay_ms || |
| pdata->scan_delay_ms > MAX_SCAN_DELAY || |
| pdata->scan_delay_ms < MIN_SCAN_DELAY || |
| !is_power_of_2(pdata->scan_delay_ms)) { |
| dev_err(&pdev->dev, "invalid keypad scan time supplied\n"); |
| return -EINVAL; |
| } |
| |
| if (!pdata->row_hold_ns || |
| pdata->row_hold_ns > MAX_ROW_HOLD_DELAY || |
| pdata->row_hold_ns < MIN_ROW_HOLD_DELAY || |
| ((pdata->row_hold_ns % MIN_ROW_HOLD_DELAY) != 0)) { |
| dev_err(&pdev->dev, "invalid keypad row hold time supplied\n"); |
| return -EINVAL; |
| } |
| |
| if (!pdata->debounce_ms || |
| ((pdata->debounce_ms % 5) != 0) || |
| pdata->debounce_ms > MAX_DEBOUNCE_TIME || |
| pdata->debounce_ms < MIN_DEBOUNCE_TIME) { |
| dev_err(&pdev->dev, "invalid debounce time supplied\n"); |
| return -EINVAL; |
| } |
| |
| keymap_data = pdata->keymap_data; |
| if (!keymap_data) { |
| dev_err(&pdev->dev, "no keymap data supplied\n"); |
| return -EINVAL; |
| } |
| |
| kp = kzalloc(sizeof(*kp), GFP_KERNEL); |
| if (!kp) |
| return -ENOMEM; |
| |
| platform_set_drvdata(pdev, kp); |
| |
| kp->pdata = pdata; |
| kp->dev = &pdev->dev; |
| |
| kp->input = input_allocate_device(); |
| if (!kp->input) { |
| dev_err(&pdev->dev, "unable to allocate input device\n"); |
| rc = -ENOMEM; |
| goto err_alloc_device; |
| } |
| |
| kp->key_sense_irq = platform_get_irq(pdev, 0); |
| if (kp->key_sense_irq < 0) { |
| dev_err(&pdev->dev, "unable to get keypad sense irq\n"); |
| rc = -ENXIO; |
| goto err_get_irq; |
| } |
| |
| kp->key_stuck_irq = platform_get_irq(pdev, 1); |
| if (kp->key_stuck_irq < 0) { |
| dev_err(&pdev->dev, "unable to get keypad stuck irq\n"); |
| rc = -ENXIO; |
| goto err_get_irq; |
| } |
| |
| kp->input->name = pdata->input_name ? : "PMIC8XXX keypad"; |
| kp->input->phys = pdata->input_phys_device ? : "pmic8xxx_keypad/input0"; |
| |
| kp->input->dev.parent = &pdev->dev; |
| |
| kp->input->id.bustype = BUS_I2C; |
| kp->input->id.version = 0x0001; |
| kp->input->id.product = 0x0001; |
| kp->input->id.vendor = 0x0001; |
| |
| kp->input->evbit[0] = BIT_MASK(EV_KEY); |
| |
| if (pdata->rep) |
| __set_bit(EV_REP, kp->input->evbit); |
| |
| kp->input->keycode = kp->keycodes; |
| kp->input->keycodemax = PM8XXX_MATRIX_MAX_SIZE; |
| kp->input->keycodesize = sizeof(kp->keycodes); |
| kp->input->open = pmic8xxx_kp_open; |
| kp->input->close = pmic8xxx_kp_close; |
| |
| matrix_keypad_build_keymap(keymap_data, PM8XXX_ROW_SHIFT, |
| kp->input->keycode, kp->input->keybit); |
| |
| input_set_capability(kp->input, EV_MSC, MSC_SCAN); |
| input_set_drvdata(kp->input, kp); |
| |
| /* initialize keypad state */ |
| memset(kp->keystate, 0xff, sizeof(kp->keystate)); |
| memset(kp->stuckstate, 0xff, sizeof(kp->stuckstate)); |
| |
| rc = pmic8xxx_kpd_init(kp); |
| if (rc < 0) { |
| dev_err(&pdev->dev, "unable to initialize keypad controller\n"); |
| goto err_get_irq; |
| } |
| |
| rc = pmic8xxx_kp_config_gpio(pdata->cols_gpio_start, |
| pdata->num_cols, kp, &kypd_sns); |
| if (rc < 0) { |
| dev_err(&pdev->dev, "unable to configure keypad sense lines\n"); |
| goto err_gpio_config; |
| } |
| |
| rc = pmic8xxx_kp_config_gpio(pdata->rows_gpio_start, |
| pdata->num_rows, kp, &kypd_drv); |
| if (rc < 0) { |
| dev_err(&pdev->dev, "unable to configure keypad drive lines\n"); |
| goto err_gpio_config; |
| } |
| |
| rc = request_any_context_irq(kp->key_sense_irq, pmic8xxx_kp_irq, |
| IRQF_TRIGGER_RISING, "pmic-keypad", kp); |
| if (rc < 0) { |
| dev_err(&pdev->dev, "failed to request keypad sense irq\n"); |
| goto err_get_irq; |
| } |
| |
| rc = request_any_context_irq(kp->key_stuck_irq, pmic8xxx_kp_stuck_irq, |
| IRQF_TRIGGER_RISING, "pmic-keypad-stuck", kp); |
| if (rc < 0) { |
| dev_err(&pdev->dev, "failed to request keypad stuck irq\n"); |
| goto err_req_stuck_irq; |
| } |
| |
| rc = pmic8xxx_kp_read_u8(kp, &ctrl_val, KEYP_CTRL); |
| if (rc < 0) { |
| dev_err(&pdev->dev, "failed to read KEYP_CTRL register\n"); |
| goto err_pmic_reg_read; |
| } |
| |
| kp->ctrl_reg = ctrl_val; |
| |
| rc = input_register_device(kp->input); |
| if (rc < 0) { |
| dev_err(&pdev->dev, "unable to register keypad input device\n"); |
| goto err_pmic_reg_read; |
| } |
| |
| device_init_wakeup(&pdev->dev, pdata->wakeup); |
| |
| return 0; |
| |
| err_pmic_reg_read: |
| free_irq(kp->key_stuck_irq, kp); |
| err_req_stuck_irq: |
| free_irq(kp->key_sense_irq, kp); |
| err_gpio_config: |
| err_get_irq: |
| input_free_device(kp->input); |
| err_alloc_device: |
| platform_set_drvdata(pdev, NULL); |
| kfree(kp); |
| return rc; |
| } |
| |
| static int __devexit pmic8xxx_kp_remove(struct platform_device *pdev) |
| { |
| struct pmic8xxx_kp *kp = platform_get_drvdata(pdev); |
| |
| device_init_wakeup(&pdev->dev, 0); |
| free_irq(kp->key_stuck_irq, kp); |
| free_irq(kp->key_sense_irq, kp); |
| input_unregister_device(kp->input); |
| kfree(kp); |
| |
| platform_set_drvdata(pdev, NULL); |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int pmic8xxx_kp_suspend(struct device *dev) |
| { |
| struct platform_device *pdev = to_platform_device(dev); |
| struct pmic8xxx_kp *kp = platform_get_drvdata(pdev); |
| struct input_dev *input_dev = kp->input; |
| |
| if (device_may_wakeup(dev)) { |
| enable_irq_wake(kp->key_sense_irq); |
| } else { |
| mutex_lock(&input_dev->mutex); |
| |
| if (input_dev->users) |
| pmic8xxx_kp_disable(kp); |
| |
| mutex_unlock(&input_dev->mutex); |
| } |
| |
| return 0; |
| } |
| |
| static int pmic8xxx_kp_resume(struct device *dev) |
| { |
| struct platform_device *pdev = to_platform_device(dev); |
| struct pmic8xxx_kp *kp = platform_get_drvdata(pdev); |
| struct input_dev *input_dev = kp->input; |
| |
| if (device_may_wakeup(dev)) { |
| disable_irq_wake(kp->key_sense_irq); |
| } else { |
| mutex_lock(&input_dev->mutex); |
| |
| if (input_dev->users) |
| pmic8xxx_kp_enable(kp); |
| |
| mutex_unlock(&input_dev->mutex); |
| } |
| |
| return 0; |
| } |
| #endif |
| |
| static SIMPLE_DEV_PM_OPS(pm8xxx_kp_pm_ops, |
| pmic8xxx_kp_suspend, pmic8xxx_kp_resume); |
| |
| static struct platform_driver pmic8xxx_kp_driver = { |
| .probe = pmic8xxx_kp_probe, |
| .remove = __devexit_p(pmic8xxx_kp_remove), |
| .driver = { |
| .name = PM8XXX_KEYPAD_DEV_NAME, |
| .owner = THIS_MODULE, |
| .pm = &pm8xxx_kp_pm_ops, |
| }, |
| }; |
| |
| static int __init pmic8xxx_kp_init(void) |
| { |
| return platform_driver_register(&pmic8xxx_kp_driver); |
| } |
| module_init(pmic8xxx_kp_init); |
| |
| static void __exit pmic8xxx_kp_exit(void) |
| { |
| platform_driver_unregister(&pmic8xxx_kp_driver); |
| } |
| module_exit(pmic8xxx_kp_exit); |
| |
| MODULE_LICENSE("GPL v2"); |
| MODULE_DESCRIPTION("PMIC8XXX keypad driver"); |
| MODULE_VERSION("1.0"); |
| MODULE_ALIAS("platform:pmic8xxx_keypad"); |
| MODULE_AUTHOR("Trilok Soni <tsoni@codeaurora.org>"); |