| if ARCH_PXA |
| |
| menu "Intel PXA2xx/PXA3xx Implementations" |
| |
| if PXA3xx |
| |
| menu "Supported PXA3xx Processor Variants" |
| |
| config CPU_PXA300 |
| bool "PXA300 (codename Monahans-L)" |
| |
| config CPU_PXA310 |
| bool "PXA310 (codename Monahans-LV)" |
| select CPU_PXA300 |
| |
| config CPU_PXA320 |
| bool "PXA320 (codename Monahans-P)" |
| |
| config CPU_PXA930 |
| bool "PXA930 (codename Tavor-P)" |
| |
| config CPU_PXA935 |
| bool "PXA935 (codename Tavor-P65)" |
| |
| endmenu |
| |
| endif |
| |
| config ARCH_GUMSTIX |
| bool "Gumstix XScale 255 boards" |
| select PXA25x |
| help |
| Say Y here if you intend to run this kernel on |
| Basix, Connex, ws-200ax, ws-400ax systems |
| |
| choice |
| prompt "Gumstix Carrier/Expansion Board" |
| depends on ARCH_GUMSTIX |
| |
| config GUMSTIX_AM200EPD |
| bool "Enable AM200EPD board support" |
| |
| endchoice |
| |
| config MACH_INTELMOTE2 |
| bool "Intel Mote 2 Platform" |
| select PXA27x |
| select IWMMXT |
| select PXA_HAVE_BOARD_IRQS |
| |
| config ARCH_LUBBOCK |
| bool "Intel DBPXA250 Development Platform" |
| select PXA25x |
| select SA1111 |
| select PXA_HAVE_BOARD_IRQS |
| |
| config MACH_LOGICPD_PXA270 |
| bool "LogicPD PXA270 Card Engine Development Platform" |
| select PXA27x |
| select HAVE_PWM |
| select PXA_HAVE_BOARD_IRQS |
| |
| config MACH_MAINSTONE |
| bool "Intel HCDDBBVA0 Development Platform" |
| select PXA27x |
| select HAVE_PWM |
| select PXA_HAVE_BOARD_IRQS |
| |
| config MACH_MP900C |
| bool "Nec Mobilepro 900/c" |
| select PXA25x |
| |
| config ARCH_PXA_IDP |
| bool "Accelent Xscale IDP" |
| select PXA25x |
| |
| config PXA_SHARPSL |
| bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models" |
| select SHARP_SCOOP |
| select SHARP_PARAM |
| help |
| Say Y here if you intend to run this kernel on a |
| Sharp Zaurus SL-5600 (Poodle), SL-C700 (Corgi), |
| SL-C750 (Shepherd), SL-C760 (Husky), SL-C1000 (Akita), |
| SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa) |
| handheld computer. |
| |
| config CORGI_SSP_DEPRECATED |
| bool |
| select PXA_SSP |
| help |
| This option will include corgi_ssp.c and corgi_lcd.c |
| that corgi_ts.c and other legacy drivers (corgi_bl.c |
| and sharpsl_pm.c) may depend on. |
| |
| config MACH_POODLE |
| bool "Enable Sharp SL-5600 (Poodle) Support" |
| depends on PXA_SHARPSL |
| select PXA25x |
| select SHARP_LOCOMO |
| select PXA_SSP |
| |
| config MACH_CORGI |
| bool "Enable Sharp SL-C700 (Corgi) Support" |
| depends on PXA_SHARPSL |
| select PXA25x |
| select PXA_SHARP_C7xx |
| |
| config MACH_SHEPHERD |
| bool "Enable Sharp SL-C750 (Shepherd) Support" |
| depends on PXA_SHARPSL |
| select PXA25x |
| select PXA_SHARP_C7xx |
| |
| config MACH_HUSKY |
| bool "Enable Sharp SL-C760 (Husky) Support" |
| depends on PXA_SHARPSL |
| select PXA25x |
| select PXA_SHARP_C7xx |
| |
| config MACH_AKITA |
| bool "Enable Sharp SL-1000 (Akita) Support" |
| depends on PXA_SHARPSL |
| select PXA27x |
| select PXA_SHARP_Cxx00 |
| select MACH_SPITZ |
| select I2C |
| select I2C_PXA |
| |
| config MACH_SPITZ |
| bool "Enable Sharp Zaurus SL-3000 (Spitz) Support" |
| depends on PXA_SHARPSL |
| select PXA27x |
| select PXA_SHARP_Cxx00 |
| |
| config MACH_BORZOI |
| bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support" |
| depends on PXA_SHARPSL |
| select PXA27x |
| select PXA_SHARP_Cxx00 |
| |
| config MACH_TOSA |
| bool "Enable Sharp SL-6000x (Tosa) Support" |
| depends on PXA_SHARPSL |
| select PXA25x |
| select PXA_HAVE_BOARD_IRQS |
| |
| config ARCH_VIPER |
| bool "Arcom/Eurotech VIPER SBC" |
| select PXA25x |
| select ISA |
| select I2C_GPIO |
| select HAVE_PWM |
| select PXA_HAVE_BOARD_IRQS |
| select PXA_HAVE_ISA_IRQS |
| |
| config ARCH_PXA_ESERIES |
| bool "PXA based Toshiba e-series PDAs" |
| select PXA25x |
| select PXA_HAVE_BOARD_IRQS |
| |
| config MACH_E330 |
| bool "Toshiba e330" |
| default y |
| depends on ARCH_PXA_ESERIES |
| help |
| Say Y here if you intend to run this kernel on a Toshiba |
| e330 family PDA. |
| |
| config MACH_E350 |
| bool "Toshiba e350" |
| default y |
| depends on ARCH_PXA_ESERIES |
| help |
| Say Y here if you intend to run this kernel on a Toshiba |
| e350 family PDA. |
| |
| config MACH_E740 |
| bool "Toshiba e740" |
| default y |
| depends on ARCH_PXA_ESERIES |
| select FB_W100 |
| help |
| Say Y here if you intend to run this kernel on a Toshiba |
| e740 family PDA. |
| |
| config MACH_E750 |
| bool "Toshiba e750" |
| default y |
| depends on ARCH_PXA_ESERIES |
| select FB_W100 |
| help |
| Say Y here if you intend to run this kernel on a Toshiba |
| e750 family PDA. |
| |
| config MACH_E400 |
| bool "Toshiba e400" |
| default y |
| depends on ARCH_PXA_ESERIES |
| help |
| Say Y here if you intend to run this kernel on a Toshiba |
| e400 family PDA. |
| |
| config MACH_E800 |
| bool "Toshiba e800" |
| default y |
| depends on ARCH_PXA_ESERIES |
| select FB_W100 |
| help |
| Say Y here if you intend to run this kernel on a Toshiba |
| e800 family PDA. |
| |
| config TRIZEPS_PXA |
| bool "PXA based Keith und Koep Trizeps DIMM-Modules" |
| |
| config MACH_H5000 |
| bool "HP iPAQ h5000" |
| select PXA25x |
| |
| config MACH_TRIZEPS4 |
| bool "Keith und Koep Trizeps4 DIMM-Module" |
| depends on TRIZEPS_PXA |
| select TRIZEPS_PCMCIA |
| select PXA27x |
| |
| config MACH_TRIZEPS4WL |
| bool "Keith und Koep Trizeps4-WL DIMM-Module" |
| depends on TRIZEPS_PXA |
| select TRIZEPS_PCMCIA |
| select PXA27x |
| select PXA_SSP |
| |
| choice |
| prompt "Select base board for Trizeps module" |
| depends on TRIZEPS_PXA |
| |
| config MACH_TRIZEPS_CONXS |
| bool "ConXS Eval Board" |
| |
| config MACH_TRIZEPS_UCONXS |
| bool "uConXS Eval Board" |
| |
| config MACH_TRIZEPS_ANY |
| bool "another Board" |
| |
| endchoice |
| |
| config TRIZEPS_PCMCIA |
| bool |
| help |
| Enable PCMCIA support for Trizeps modules |
| |
| config MACH_EM_X270 |
| bool "CompuLab EM-x270 platform" |
| select PXA27x |
| |
| config MACH_COLIBRI |
| bool "Toradex Colibri PX27x" |
| select PXA27x |
| |
| config MACH_ZYLONITE |
| bool "PXA3xx Development Platform (aka Zylonite)" |
| select PXA3xx |
| select PXA_SSP |
| select HAVE_PWM |
| |
| config MACH_LITTLETON |
| bool "PXA3xx Form Factor Platform (aka Littleton)" |
| select PXA3xx |
| select PXA_SSP |
| |
| config MACH_TAVOREVB |
| bool "PXA930 Evaluation Board (aka TavorEVB)" |
| select PXA3xx |
| select PXA930 |
| |
| config MACH_SAAR |
| bool "PXA930 Handheld Platform (aka SAAR)" |
| select PXA3xx |
| select PXA930 |
| |
| config MACH_ARMCORE |
| bool "CompuLab CM-X255/CM-X270 modules" |
| select PXA27x |
| select IWMMXT |
| select PXA25x |
| select PXA_SSP |
| |
| config MACH_CM_X300 |
| bool "CompuLab CM-X300 modules" |
| select PXA3xx |
| select CPU_PXA300 |
| |
| config MACH_MAGICIAN |
| bool "Enable HTC Magician Support" |
| select PXA27x |
| select IWMMXT |
| select HAVE_PWM |
| select PXA_HAVE_BOARD_IRQS |
| |
| config MACH_MIOA701 |
| bool "Mitac Mio A701 Support" |
| select PXA27x |
| select IWMMXT |
| select HAVE_PWM |
| select GPIO_SYSFS |
| help |
| Say Y here if you intend to run this kernel on a |
| MIO A701. Currently there is only basic support |
| for this PDA. |
| |
| config MACH_PCM027 |
| bool "Phytec phyCORE-PXA270 CPU module (PCM-027)" |
| select PXA27x |
| select IWMMXT |
| select PXA_SSP |
| select PXA_HAVE_BOARD_IRQS |
| |
| config ARCH_PXA_PALM |
| bool "PXA based Palm PDAs" |
| select HAVE_PWM |
| |
| config MACH_PALMT5 |
| bool "Palm Tungsten|T5" |
| default y |
| depends on ARCH_PXA_PALM |
| select PXA27x |
| select IWMMXT |
| help |
| Say Y here if you intend to run this kernel on a Palm Tungsten|T5 |
| handheld computer. |
| |
| config MACH_PALMTX |
| bool "Palm T|X" |
| default y |
| depends on ARCH_PXA_PALM |
| select PXA27x |
| select IWMMXT |
| help |
| Say Y here if you intend to run this kernel on a Palm T|X |
| handheld computer. |
| |
| config MACH_PALMZ72 |
| bool "Palm Zire 72" |
| default y |
| depends on ARCH_PXA_PALM |
| select PXA27x |
| select IWMMXT |
| help |
| Say Y here if you intend to run this kernel on Palm Zire 72 |
| handheld computer. |
| |
| config MACH_PALMLD |
| bool "Palm LifeDrive" |
| default y |
| depends on ARCH_PXA_PALM |
| select PXA27x |
| select IWMMXT |
| help |
| Say Y here if you intend to run this kernel on a Palm LifeDrive |
| handheld computer. |
| |
| config MACH_PCM990_BASEBOARD |
| bool "PHYTEC PCM-990 development board" |
| select HAVE_PWM |
| depends on MACH_PCM027 |
| |
| choice |
| prompt "display on pcm990" |
| depends on MACH_PCM990_BASEBOARD |
| |
| config PCM990_DISPLAY_SHARP |
| bool "sharp lq084v1dg21 stn display" |
| |
| config PCM990_DISPLAY_NEC |
| bool "nec nl6448bc20_18d tft display" |
| |
| config PCM990_DISPLAY_NONE |
| bool "no display" |
| |
| endchoice |
| |
| config PXA_EZX |
| bool "Motorola EZX Platform" |
| select PXA27x |
| select IWMMXT |
| select HAVE_PWM |
| |
| config MACH_EZX_A780 |
| bool "Motorola EZX A780" |
| default y |
| depends on PXA_EZX |
| |
| config MACH_EZX_E680 |
| bool "Motorola EZX E680" |
| default y |
| depends on PXA_EZX |
| |
| config MACH_EZX_A1200 |
| bool "Motorola EZX A1200" |
| default y |
| depends on PXA_EZX |
| |
| config MACH_EZX_A910 |
| bool "Motorola EZX A910" |
| default y |
| depends on PXA_EZX |
| |
| config MACH_EZX_E6 |
| bool "Motorola EZX E6" |
| default y |
| depends on PXA_EZX |
| |
| config MACH_EZX_E2 |
| bool "Motorola EZX E2" |
| default y |
| depends on PXA_EZX |
| |
| endmenu |
| |
| config PXA25x |
| bool |
| select CPU_XSCALE |
| help |
| Select code specific to PXA21x/25x/26x variants |
| |
| config PXA27x |
| bool |
| select CPU_XSCALE |
| help |
| Select code specific to PXA27x variants |
| |
| config CPU_PXA26x |
| bool |
| select PXA25x |
| help |
| Select code specific to PXA26x (codename Dalhart) |
| |
| config PXA3xx |
| bool |
| select CPU_XSC3 |
| help |
| Select code specific to PXA3xx variants |
| |
| config PXA_SHARP_C7xx |
| bool |
| select PXA_SSP |
| select SHARPSL_PM |
| help |
| Enable support for all Sharp C7xx models |
| |
| config PXA_SHARP_Cxx00 |
| bool |
| select PXA_SSP |
| select SHARPSL_PM |
| help |
| Enable common support for Sharp Cxx00 models |
| |
| config PXA_SSP |
| tristate |
| help |
| Enable support for PXA2xx SSP ports |
| |
| config PXA_PWM |
| tristate |
| default BACKLIGHT_PWM |
| help |
| Enable support for PXA2xx/PXA3xx PWM controllers |
| |
| config TOSA_BT |
| tristate "Control the state of built-in bluetooth chip on Sharp SL-6000" |
| depends on MACH_TOSA |
| select RFKILL |
| help |
| This is a simple driver that is able to control |
| the state of built in bluetooth chip on tosa. |
| |
| config PXA_HAVE_BOARD_IRQS |
| bool |
| |
| config PXA_HAVE_ISA_IRQS |
| bool |
| |
| endif |