| /* |
| Driver for STV0297 demodulator |
| |
| Copyright (C) 2004 Andrew de Quincey <adq_dvb@lidskialf.net> |
| Copyright (C) 2003-2004 Dennis Noermann <dennis.noermann@noernet.de> |
| |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 2 of the License, or |
| (at your option) any later version. |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with this program; if not, write to the Free Software |
| Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/string.h> |
| #include <linux/delay.h> |
| #include <linux/jiffies.h> |
| #include <linux/slab.h> |
| |
| #include "dvb_frontend.h" |
| #include "stv0297.h" |
| |
| struct stv0297_state { |
| struct i2c_adapter *i2c; |
| struct dvb_frontend_ops ops; |
| const struct stv0297_config *config; |
| struct dvb_frontend frontend; |
| |
| unsigned long base_freq; |
| }; |
| |
| #if 1 |
| #define dprintk(x...) printk(x) |
| #else |
| #define dprintk(x...) |
| #endif |
| |
| #define STV0297_CLOCK_KHZ 28900 |
| |
| |
| static int stv0297_writereg(struct stv0297_state *state, u8 reg, u8 data) |
| { |
| int ret; |
| u8 buf[] = { reg, data }; |
| struct i2c_msg msg = {.addr = state->config->demod_address,.flags = 0,.buf = buf,.len = 2 }; |
| |
| ret = i2c_transfer(state->i2c, &msg, 1); |
| |
| if (ret != 1) |
| dprintk("%s: writereg error (reg == 0x%02x, val == 0x%02x, " |
| "ret == %i)\n", __FUNCTION__, reg, data, ret); |
| |
| return (ret != 1) ? -1 : 0; |
| } |
| |
| static int stv0297_readreg(struct stv0297_state *state, u8 reg) |
| { |
| int ret; |
| u8 b0[] = { reg }; |
| u8 b1[] = { 0 }; |
| struct i2c_msg msg[] = { {.addr = state->config->demod_address,.flags = 0,.buf = b0,.len = |
| 1}, |
| {.addr = state->config->demod_address,.flags = I2C_M_RD,.buf = b1,.len = 1} |
| }; |
| |
| // this device needs a STOP between the register and data |
| if ((ret = i2c_transfer(state->i2c, &msg[0], 1)) != 1) { |
| dprintk("%s: readreg error (reg == 0x%02x, ret == %i)\n", __FUNCTION__, reg, ret); |
| return -1; |
| } |
| if ((ret = i2c_transfer(state->i2c, &msg[1], 1)) != 1) { |
| dprintk("%s: readreg error (reg == 0x%02x, ret == %i)\n", __FUNCTION__, reg, ret); |
| return -1; |
| } |
| |
| return b1[0]; |
| } |
| |
| static int stv0297_writereg_mask(struct stv0297_state *state, u8 reg, u8 mask, u8 data) |
| { |
| int val; |
| |
| val = stv0297_readreg(state, reg); |
| val &= ~mask; |
| val |= (data & mask); |
| stv0297_writereg(state, reg, val); |
| |
| return 0; |
| } |
| |
| static int stv0297_readregs(struct stv0297_state *state, u8 reg1, u8 * b, u8 len) |
| { |
| int ret; |
| struct i2c_msg msg[] = { {.addr = state->config->demod_address,.flags = 0,.buf = |
| ®1,.len = 1}, |
| {.addr = state->config->demod_address,.flags = I2C_M_RD,.buf = b,.len = len} |
| }; |
| |
| // this device needs a STOP between the register and data |
| if ((ret = i2c_transfer(state->i2c, &msg[0], 1)) != 1) { |
| dprintk("%s: readreg error (reg == 0x%02x, ret == %i)\n", __FUNCTION__, reg1, ret); |
| return -1; |
| } |
| if ((ret = i2c_transfer(state->i2c, &msg[1], 1)) != 1) { |
| dprintk("%s: readreg error (reg == 0x%02x, ret == %i)\n", __FUNCTION__, reg1, ret); |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| static u32 stv0297_get_symbolrate(struct stv0297_state *state) |
| { |
| u64 tmp; |
| |
| tmp = stv0297_readreg(state, 0x55); |
| tmp |= stv0297_readreg(state, 0x56) << 8; |
| tmp |= stv0297_readreg(state, 0x57) << 16; |
| tmp |= stv0297_readreg(state, 0x58) << 24; |
| |
| tmp *= STV0297_CLOCK_KHZ; |
| tmp >>= 32; |
| |
| return (u32) tmp; |
| } |
| |
| static void stv0297_set_symbolrate(struct stv0297_state *state, u32 srate) |
| { |
| long tmp; |
| |
| tmp = 131072L * srate; /* 131072 = 2^17 */ |
| tmp = tmp / (STV0297_CLOCK_KHZ / 4); /* 1/4 = 2^-2 */ |
| tmp = tmp * 8192L; /* 8192 = 2^13 */ |
| |
| stv0297_writereg(state, 0x55, (unsigned char) (tmp & 0xFF)); |
| stv0297_writereg(state, 0x56, (unsigned char) (tmp >> 8)); |
| stv0297_writereg(state, 0x57, (unsigned char) (tmp >> 16)); |
| stv0297_writereg(state, 0x58, (unsigned char) (tmp >> 24)); |
| } |
| |
| static void stv0297_set_sweeprate(struct stv0297_state *state, short fshift, long symrate) |
| { |
| long tmp; |
| |
| tmp = (long) fshift *262144L; /* 262144 = 2*18 */ |
| tmp /= symrate; |
| tmp *= 1024; /* 1024 = 2*10 */ |
| |
| // adjust |
| if (tmp >= 0) { |
| tmp += 500000; |
| } else { |
| tmp -= 500000; |
| } |
| tmp /= 1000000; |
| |
| stv0297_writereg(state, 0x60, tmp & 0xFF); |
| stv0297_writereg_mask(state, 0x69, 0xF0, (tmp >> 4) & 0xf0); |
| } |
| |
| static void stv0297_set_carrieroffset(struct stv0297_state *state, long offset) |
| { |
| long tmp; |
| |
| /* symrate is hardcoded to 10000 */ |
| tmp = offset * 26844L; /* (2**28)/10000 */ |
| if (tmp < 0) |
| tmp += 0x10000000; |
| tmp &= 0x0FFFFFFF; |
| |
| stv0297_writereg(state, 0x66, (unsigned char) (tmp & 0xFF)); |
| stv0297_writereg(state, 0x67, (unsigned char) (tmp >> 8)); |
| stv0297_writereg(state, 0x68, (unsigned char) (tmp >> 16)); |
| stv0297_writereg_mask(state, 0x69, 0x0F, (tmp >> 24) & 0x0f); |
| } |
| |
| /* |
| static long stv0297_get_carrieroffset(struct stv0297_state *state) |
| { |
| s64 tmp; |
| |
| stv0297_writereg(state, 0x6B, 0x00); |
| |
| tmp = stv0297_readreg(state, 0x66); |
| tmp |= (stv0297_readreg(state, 0x67) << 8); |
| tmp |= (stv0297_readreg(state, 0x68) << 16); |
| tmp |= (stv0297_readreg(state, 0x69) & 0x0F) << 24; |
| |
| tmp *= stv0297_get_symbolrate(state); |
| tmp >>= 28; |
| |
| return (s32) tmp; |
| } |
| */ |
| |
| static void stv0297_set_initialdemodfreq(struct stv0297_state *state, long freq) |
| { |
| s32 tmp; |
| |
| if (freq > 10000) |
| freq -= STV0297_CLOCK_KHZ; |
| |
| tmp = (STV0297_CLOCK_KHZ * 1000) / (1 << 16); |
| tmp = (freq * 1000) / tmp; |
| if (tmp > 0xffff) |
| tmp = 0xffff; |
| |
| stv0297_writereg_mask(state, 0x25, 0x80, 0x80); |
| stv0297_writereg(state, 0x21, tmp >> 8); |
| stv0297_writereg(state, 0x20, tmp); |
| } |
| |
| static int stv0297_set_qam(struct stv0297_state *state, fe_modulation_t modulation) |
| { |
| int val = 0; |
| |
| switch (modulation) { |
| case QAM_16: |
| val = 0; |
| break; |
| |
| case QAM_32: |
| val = 1; |
| break; |
| |
| case QAM_64: |
| val = 4; |
| break; |
| |
| case QAM_128: |
| val = 2; |
| break; |
| |
| case QAM_256: |
| val = 3; |
| break; |
| |
| default: |
| return -EINVAL; |
| } |
| |
| stv0297_writereg_mask(state, 0x00, 0x70, val << 4); |
| |
| return 0; |
| } |
| |
| static int stv0297_set_inversion(struct stv0297_state *state, fe_spectral_inversion_t inversion) |
| { |
| int val = 0; |
| |
| switch (inversion) { |
| case INVERSION_OFF: |
| val = 0; |
| break; |
| |
| case INVERSION_ON: |
| val = 1; |
| break; |
| |
| default: |
| return -EINVAL; |
| } |
| |
| stv0297_writereg_mask(state, 0x83, 0x08, val << 3); |
| |
| return 0; |
| } |
| |
| int stv0297_enable_plli2c(struct dvb_frontend *fe) |
| { |
| struct stv0297_state *state = fe->demodulator_priv; |
| |
| stv0297_writereg(state, 0x87, 0x78); |
| stv0297_writereg(state, 0x86, 0xc8); |
| |
| return 0; |
| } |
| |
| static int stv0297_init(struct dvb_frontend *fe) |
| { |
| struct stv0297_state *state = fe->demodulator_priv; |
| int i; |
| |
| /* load init table */ |
| for (i=0; !(state->config->inittab[i] == 0xff && state->config->inittab[i+1] == 0xff); i+=2) |
| stv0297_writereg(state, state->config->inittab[i], state->config->inittab[i+1]); |
| msleep(200); |
| |
| if (state->config->pll_init) |
| state->config->pll_init(fe); |
| |
| return 0; |
| } |
| |
| static int stv0297_sleep(struct dvb_frontend *fe) |
| { |
| struct stv0297_state *state = fe->demodulator_priv; |
| |
| stv0297_writereg_mask(state, 0x80, 1, 1); |
| |
| return 0; |
| } |
| |
| static int stv0297_read_status(struct dvb_frontend *fe, fe_status_t * status) |
| { |
| struct stv0297_state *state = fe->demodulator_priv; |
| |
| u8 sync = stv0297_readreg(state, 0xDF); |
| |
| *status = 0; |
| if (sync & 0x80) |
| *status |= |
| FE_HAS_SYNC | FE_HAS_SIGNAL | FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_LOCK; |
| return 0; |
| } |
| |
| static int stv0297_read_ber(struct dvb_frontend *fe, u32 * ber) |
| { |
| struct stv0297_state *state = fe->demodulator_priv; |
| u8 BER[3]; |
| |
| stv0297_writereg(state, 0xA0, 0x80); // Start Counting bit errors for 4096 Bytes |
| mdelay(25); // Hopefully got 4096 Bytes |
| stv0297_readregs(state, 0xA0, BER, 3); |
| mdelay(25); |
| *ber = (BER[2] << 8 | BER[1]) / (8 * 4096); |
| |
| return 0; |
| } |
| |
| |
| static int stv0297_read_signal_strength(struct dvb_frontend *fe, u16 * strength) |
| { |
| struct stv0297_state *state = fe->demodulator_priv; |
| u8 STRENGTH[2]; |
| |
| stv0297_readregs(state, 0x41, STRENGTH, 2); |
| *strength = (STRENGTH[1] & 0x03) << 8 | STRENGTH[0]; |
| |
| return 0; |
| } |
| |
| static int stv0297_read_snr(struct dvb_frontend *fe, u16 * snr) |
| { |
| struct stv0297_state *state = fe->demodulator_priv; |
| u8 SNR[2]; |
| |
| stv0297_readregs(state, 0x07, SNR, 2); |
| *snr = SNR[1] << 8 | SNR[0]; |
| |
| return 0; |
| } |
| |
| static int stv0297_read_ucblocks(struct dvb_frontend *fe, u32 * ucblocks) |
| { |
| struct stv0297_state *state = fe->demodulator_priv; |
| |
| *ucblocks = (stv0297_readreg(state, 0xD5) << 8) |
| | stv0297_readreg(state, 0xD4); |
| |
| return 0; |
| } |
| |
| static int stv0297_set_frontend(struct dvb_frontend *fe, struct dvb_frontend_parameters *p) |
| { |
| struct stv0297_state *state = fe->demodulator_priv; |
| int u_threshold; |
| int initial_u; |
| int blind_u; |
| int delay; |
| int sweeprate; |
| int carrieroffset; |
| unsigned long starttime; |
| unsigned long timeout; |
| fe_spectral_inversion_t inversion; |
| |
| switch (p->u.qam.modulation) { |
| case QAM_16: |
| case QAM_32: |
| case QAM_64: |
| delay = 100; |
| sweeprate = 1500; |
| break; |
| |
| case QAM_128: |
| case QAM_256: |
| delay = 200; |
| sweeprate = 500; |
| break; |
| |
| default: |
| return -EINVAL; |
| } |
| |
| // determine inversion dependant parameters |
| inversion = p->inversion; |
| if (state->config->invert) |
| inversion = (inversion == INVERSION_ON) ? INVERSION_OFF : INVERSION_ON; |
| carrieroffset = -330; |
| switch (inversion) { |
| case INVERSION_OFF: |
| break; |
| |
| case INVERSION_ON: |
| sweeprate = -sweeprate; |
| carrieroffset = -carrieroffset; |
| break; |
| |
| default: |
| return -EINVAL; |
| } |
| |
| stv0297_init(fe); |
| state->config->pll_set(fe, p); |
| |
| /* clear software interrupts */ |
| stv0297_writereg(state, 0x82, 0x0); |
| |
| /* set initial demodulation frequency */ |
| stv0297_set_initialdemodfreq(state, 7250); |
| |
| /* setup AGC */ |
| stv0297_writereg_mask(state, 0x43, 0x10, 0x00); |
| stv0297_writereg(state, 0x41, 0x00); |
| stv0297_writereg_mask(state, 0x42, 0x03, 0x01); |
| stv0297_writereg_mask(state, 0x36, 0x60, 0x00); |
| stv0297_writereg_mask(state, 0x36, 0x18, 0x00); |
| stv0297_writereg_mask(state, 0x71, 0x80, 0x80); |
| stv0297_writereg(state, 0x72, 0x00); |
| stv0297_writereg(state, 0x73, 0x00); |
| stv0297_writereg_mask(state, 0x74, 0x0F, 0x00); |
| stv0297_writereg_mask(state, 0x43, 0x08, 0x00); |
| stv0297_writereg_mask(state, 0x71, 0x80, 0x00); |
| |
| /* setup STL */ |
| stv0297_writereg_mask(state, 0x5a, 0x20, 0x20); |
| stv0297_writereg_mask(state, 0x5b, 0x02, 0x02); |
| stv0297_writereg_mask(state, 0x5b, 0x02, 0x00); |
| stv0297_writereg_mask(state, 0x5b, 0x01, 0x00); |
| stv0297_writereg_mask(state, 0x5a, 0x40, 0x40); |
| |
| /* disable frequency sweep */ |
| stv0297_writereg_mask(state, 0x6a, 0x01, 0x00); |
| |
| /* reset deinterleaver */ |
| stv0297_writereg_mask(state, 0x81, 0x01, 0x01); |
| stv0297_writereg_mask(state, 0x81, 0x01, 0x00); |
| |
| /* ??? */ |
| stv0297_writereg_mask(state, 0x83, 0x20, 0x20); |
| stv0297_writereg_mask(state, 0x83, 0x20, 0x00); |
| |
| /* reset equaliser */ |
| u_threshold = stv0297_readreg(state, 0x00) & 0xf; |
| initial_u = stv0297_readreg(state, 0x01) >> 4; |
| blind_u = stv0297_readreg(state, 0x01) & 0xf; |
| stv0297_writereg_mask(state, 0x84, 0x01, 0x01); |
| stv0297_writereg_mask(state, 0x84, 0x01, 0x00); |
| stv0297_writereg_mask(state, 0x00, 0x0f, u_threshold); |
| stv0297_writereg_mask(state, 0x01, 0xf0, initial_u << 4); |
| stv0297_writereg_mask(state, 0x01, 0x0f, blind_u); |
| |
| /* data comes from internal A/D */ |
| stv0297_writereg_mask(state, 0x87, 0x80, 0x00); |
| |
| /* clear phase registers */ |
| stv0297_writereg(state, 0x63, 0x00); |
| stv0297_writereg(state, 0x64, 0x00); |
| stv0297_writereg(state, 0x65, 0x00); |
| stv0297_writereg(state, 0x66, 0x00); |
| stv0297_writereg(state, 0x67, 0x00); |
| stv0297_writereg(state, 0x68, 0x00); |
| stv0297_writereg_mask(state, 0x69, 0x0f, 0x00); |
| |
| /* set parameters */ |
| stv0297_set_qam(state, p->u.qam.modulation); |
| stv0297_set_symbolrate(state, p->u.qam.symbol_rate / 1000); |
| stv0297_set_sweeprate(state, sweeprate, p->u.qam.symbol_rate / 1000); |
| stv0297_set_carrieroffset(state, carrieroffset); |
| stv0297_set_inversion(state, inversion); |
| |
| /* kick off lock */ |
| /* Disable corner detection for higher QAMs */ |
| if (p->u.qam.modulation == QAM_128 || |
| p->u.qam.modulation == QAM_256) |
| stv0297_writereg_mask(state, 0x88, 0x08, 0x00); |
| else |
| stv0297_writereg_mask(state, 0x88, 0x08, 0x08); |
| |
| stv0297_writereg_mask(state, 0x5a, 0x20, 0x00); |
| stv0297_writereg_mask(state, 0x6a, 0x01, 0x01); |
| stv0297_writereg_mask(state, 0x43, 0x40, 0x40); |
| stv0297_writereg_mask(state, 0x5b, 0x30, 0x00); |
| stv0297_writereg_mask(state, 0x03, 0x0c, 0x0c); |
| stv0297_writereg_mask(state, 0x03, 0x03, 0x03); |
| stv0297_writereg_mask(state, 0x43, 0x10, 0x10); |
| |
| /* wait for WGAGC lock */ |
| starttime = jiffies; |
| timeout = jiffies + msecs_to_jiffies(2000); |
| while (time_before(jiffies, timeout)) { |
| msleep(10); |
| if (stv0297_readreg(state, 0x43) & 0x08) |
| break; |
| } |
| if (time_after(jiffies, timeout)) { |
| goto timeout; |
| } |
| msleep(20); |
| |
| /* wait for equaliser partial convergence */ |
| timeout = jiffies + msecs_to_jiffies(500); |
| while (time_before(jiffies, timeout)) { |
| msleep(10); |
| |
| if (stv0297_readreg(state, 0x82) & 0x04) { |
| break; |
| } |
| } |
| if (time_after(jiffies, timeout)) { |
| goto timeout; |
| } |
| |
| /* wait for equaliser full convergence */ |
| timeout = jiffies + msecs_to_jiffies(delay); |
| while (time_before(jiffies, timeout)) { |
| msleep(10); |
| |
| if (stv0297_readreg(state, 0x82) & 0x08) { |
| break; |
| } |
| } |
| if (time_after(jiffies, timeout)) { |
| goto timeout; |
| } |
| |
| /* disable sweep */ |
| stv0297_writereg_mask(state, 0x6a, 1, 0); |
| stv0297_writereg_mask(state, 0x88, 8, 0); |
| |
| /* wait for main lock */ |
| timeout = jiffies + msecs_to_jiffies(20); |
| while (time_before(jiffies, timeout)) { |
| msleep(10); |
| |
| if (stv0297_readreg(state, 0xDF) & 0x80) { |
| break; |
| } |
| } |
| if (time_after(jiffies, timeout)) { |
| goto timeout; |
| } |
| msleep(100); |
| |
| /* is it still locked after that delay? */ |
| if (!(stv0297_readreg(state, 0xDF) & 0x80)) { |
| goto timeout; |
| } |
| |
| /* success!! */ |
| stv0297_writereg_mask(state, 0x5a, 0x40, 0x00); |
| state->base_freq = p->frequency; |
| return 0; |
| |
| timeout: |
| stv0297_writereg_mask(state, 0x6a, 0x01, 0x00); |
| return 0; |
| } |
| |
| static int stv0297_get_frontend(struct dvb_frontend *fe, struct dvb_frontend_parameters *p) |
| { |
| struct stv0297_state *state = fe->demodulator_priv; |
| int reg_00, reg_83; |
| |
| reg_00 = stv0297_readreg(state, 0x00); |
| reg_83 = stv0297_readreg(state, 0x83); |
| |
| p->frequency = state->base_freq; |
| p->inversion = (reg_83 & 0x08) ? INVERSION_ON : INVERSION_OFF; |
| if (state->config->invert) |
| p->inversion = (p->inversion == INVERSION_ON) ? INVERSION_OFF : INVERSION_ON; |
| p->u.qam.symbol_rate = stv0297_get_symbolrate(state) * 1000; |
| p->u.qam.fec_inner = FEC_NONE; |
| |
| switch ((reg_00 >> 4) & 0x7) { |
| case 0: |
| p->u.qam.modulation = QAM_16; |
| break; |
| case 1: |
| p->u.qam.modulation = QAM_32; |
| break; |
| case 2: |
| p->u.qam.modulation = QAM_128; |
| break; |
| case 3: |
| p->u.qam.modulation = QAM_256; |
| break; |
| case 4: |
| p->u.qam.modulation = QAM_64; |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static void stv0297_release(struct dvb_frontend *fe) |
| { |
| struct stv0297_state *state = fe->demodulator_priv; |
| kfree(state); |
| } |
| |
| static struct dvb_frontend_ops stv0297_ops; |
| |
| struct dvb_frontend *stv0297_attach(const struct stv0297_config *config, |
| struct i2c_adapter *i2c) |
| { |
| struct stv0297_state *state = NULL; |
| |
| /* allocate memory for the internal state */ |
| state = kmalloc(sizeof(struct stv0297_state), GFP_KERNEL); |
| if (state == NULL) |
| goto error; |
| |
| /* setup the state */ |
| state->config = config; |
| state->i2c = i2c; |
| memcpy(&state->ops, &stv0297_ops, sizeof(struct dvb_frontend_ops)); |
| state->base_freq = 0; |
| |
| /* check if the demod is there */ |
| if ((stv0297_readreg(state, 0x80) & 0x70) != 0x20) |
| goto error; |
| |
| /* create dvb_frontend */ |
| state->frontend.ops = &state->ops; |
| state->frontend.demodulator_priv = state; |
| return &state->frontend; |
| |
| error: |
| kfree(state); |
| return NULL; |
| } |
| |
| static struct dvb_frontend_ops stv0297_ops = { |
| |
| .info = { |
| .name = "ST STV0297 DVB-C", |
| .type = FE_QAM, |
| .frequency_min = 64000000, |
| .frequency_max = 1300000000, |
| .frequency_stepsize = 62500, |
| .symbol_rate_min = 870000, |
| .symbol_rate_max = 11700000, |
| .caps = FE_CAN_QAM_16 | FE_CAN_QAM_32 | FE_CAN_QAM_64 | |
| FE_CAN_QAM_128 | FE_CAN_QAM_256 | FE_CAN_FEC_AUTO}, |
| |
| .release = stv0297_release, |
| |
| .init = stv0297_init, |
| .sleep = stv0297_sleep, |
| |
| .set_frontend = stv0297_set_frontend, |
| .get_frontend = stv0297_get_frontend, |
| |
| .read_status = stv0297_read_status, |
| .read_ber = stv0297_read_ber, |
| .read_signal_strength = stv0297_read_signal_strength, |
| .read_snr = stv0297_read_snr, |
| .read_ucblocks = stv0297_read_ucblocks, |
| }; |
| |
| MODULE_DESCRIPTION("ST STV0297 DVB-C Demodulator driver"); |
| MODULE_AUTHOR("Dennis Noermann and Andrew de Quincey"); |
| MODULE_LICENSE("GPL"); |
| |
| EXPORT_SYMBOL(stv0297_attach); |
| EXPORT_SYMBOL(stv0297_enable_plli2c); |