| /* |
| * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com) |
| * Copyright (C) 1997, 2001 Ralf Baechle (ralf@gnu.org) |
| * Copyright (C) 2000, 2001, 2002, 2003 Broadcom Corporation |
| * Copyright (C) 2004 Maciej W. Rozycki |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version 2 |
| * of the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. |
| */ |
| #include <linux/config.h> |
| #include <linux/init.h> |
| |
| #include <asm/asm.h> |
| #include <asm/bootinfo.h> |
| #include <asm/cacheops.h> |
| #include <asm/cpu.h> |
| #include <asm/mipsregs.h> |
| #include <asm/mmu_context.h> |
| #include <asm/uaccess.h> |
| |
| extern void sb1_dma_init(void); |
| |
| /* These are probed at ld_mmu time */ |
| static unsigned long icache_size; |
| static unsigned long dcache_size; |
| |
| static unsigned short icache_line_size; |
| static unsigned short dcache_line_size; |
| |
| static unsigned int icache_index_mask; |
| static unsigned int dcache_index_mask; |
| |
| static unsigned short icache_assoc; |
| static unsigned short dcache_assoc; |
| |
| static unsigned short icache_sets; |
| static unsigned short dcache_sets; |
| |
| static unsigned int icache_range_cutoff; |
| static unsigned int dcache_range_cutoff; |
| |
| /* |
| * The dcache is fully coherent to the system, with one |
| * big caveat: the instruction stream. In other words, |
| * if we miss in the icache, and have dirty data in the |
| * L1 dcache, then we'll go out to memory (or the L2) and |
| * get the not-as-recent data. |
| * |
| * So the only time we have to flush the dcache is when |
| * we're flushing the icache. Since the L2 is fully |
| * coherent to everything, including I/O, we never have |
| * to flush it |
| */ |
| |
| #define cache_set_op(op, addr) \ |
| __asm__ __volatile__( \ |
| " .set noreorder \n" \ |
| " .set mips64\n\t \n" \ |
| " cache %0, (0<<13)(%1) \n" \ |
| " cache %0, (1<<13)(%1) \n" \ |
| " cache %0, (2<<13)(%1) \n" \ |
| " cache %0, (3<<13)(%1) \n" \ |
| " .set mips0 \n" \ |
| " .set reorder" \ |
| : \ |
| : "i" (op), "r" (addr)) |
| |
| #define sync() \ |
| __asm__ __volatile( \ |
| " .set mips64\n\t \n" \ |
| " sync \n" \ |
| " .set mips0") |
| |
| #define mispredict() \ |
| __asm__ __volatile__( \ |
| " bnezl $0, 1f \n" /* Force mispredict */ \ |
| "1: \n"); |
| |
| /* |
| * Writeback and invalidate the entire dcache |
| */ |
| static inline void __sb1_writeback_inv_dcache_all(void) |
| { |
| unsigned long addr = 0; |
| |
| while (addr < dcache_line_size * dcache_sets) { |
| cache_set_op(Index_Writeback_Inv_D, addr); |
| addr += dcache_line_size; |
| } |
| } |
| |
| /* |
| * Writeback and invalidate a range of the dcache. The addresses are |
| * virtual, and since we're using index ops and bit 12 is part of both |
| * the virtual frame and physical index, we have to clear both sets |
| * (bit 12 set and cleared). |
| */ |
| static inline void __sb1_writeback_inv_dcache_range(unsigned long start, |
| unsigned long end) |
| { |
| unsigned long index; |
| |
| start &= ~(dcache_line_size - 1); |
| end = (end + dcache_line_size - 1) & ~(dcache_line_size - 1); |
| |
| while (start != end) { |
| index = start & dcache_index_mask; |
| cache_set_op(Index_Writeback_Inv_D, index); |
| cache_set_op(Index_Writeback_Inv_D, index ^ (1<<12)); |
| start += dcache_line_size; |
| } |
| sync(); |
| } |
| |
| /* |
| * Writeback and invalidate a range of the dcache. With physical |
| * addresseses, we don't have to worry about possible bit 12 aliasing. |
| * XXXKW is it worth turning on KX and using hit ops with xkphys? |
| */ |
| static inline void __sb1_writeback_inv_dcache_phys_range(unsigned long start, |
| unsigned long end) |
| { |
| start &= ~(dcache_line_size - 1); |
| end = (end + dcache_line_size - 1) & ~(dcache_line_size - 1); |
| |
| while (start != end) { |
| cache_set_op(Index_Writeback_Inv_D, start & dcache_index_mask); |
| start += dcache_line_size; |
| } |
| sync(); |
| } |
| |
| |
| /* |
| * Invalidate the entire icache |
| */ |
| static inline void __sb1_flush_icache_all(void) |
| { |
| unsigned long addr = 0; |
| |
| while (addr < icache_line_size * icache_sets) { |
| cache_set_op(Index_Invalidate_I, addr); |
| addr += icache_line_size; |
| } |
| } |
| |
| /* |
| * Flush the icache for a given physical page. Need to writeback the |
| * dcache first, then invalidate the icache. If the page isn't |
| * executable, nothing is required. |
| */ |
| static void local_sb1_flush_cache_page(struct vm_area_struct *vma, unsigned long addr, unsigned long pfn) |
| { |
| int cpu = smp_processor_id(); |
| |
| #ifndef CONFIG_SMP |
| if (!(vma->vm_flags & VM_EXEC)) |
| return; |
| #endif |
| |
| __sb1_writeback_inv_dcache_range(addr, addr + PAGE_SIZE); |
| |
| /* |
| * Bumping the ASID is probably cheaper than the flush ... |
| */ |
| if (cpu_context(cpu, vma->vm_mm) != 0) |
| drop_mmu_context(vma->vm_mm, cpu); |
| } |
| |
| #ifdef CONFIG_SMP |
| struct flush_cache_page_args { |
| struct vm_area_struct *vma; |
| unsigned long addr; |
| unsigned long pfn; |
| }; |
| |
| static void sb1_flush_cache_page_ipi(void *info) |
| { |
| struct flush_cache_page_args *args = info; |
| |
| local_sb1_flush_cache_page(args->vma, args->addr, args->pfn); |
| } |
| |
| /* Dirty dcache could be on another CPU, so do the IPIs */ |
| static void sb1_flush_cache_page(struct vm_area_struct *vma, unsigned long addr, unsigned long pfn) |
| { |
| struct flush_cache_page_args args; |
| |
| if (!(vma->vm_flags & VM_EXEC)) |
| return; |
| |
| addr &= PAGE_MASK; |
| args.vma = vma; |
| args.addr = addr; |
| args.pfn = pfn; |
| on_each_cpu(sb1_flush_cache_page_ipi, (void *) &args, 1, 1); |
| } |
| #else |
| void sb1_flush_cache_page(struct vm_area_struct *vma, unsigned long addr, unsigned long pfn) |
| __attribute__((alias("local_sb1_flush_cache_page"))); |
| #endif |
| |
| /* |
| * Invalidate a range of the icache. The addresses are virtual, and |
| * the cache is virtually indexed and tagged. However, we don't |
| * necessarily have the right ASID context, so use index ops instead |
| * of hit ops. |
| */ |
| static inline void __sb1_flush_icache_range(unsigned long start, |
| unsigned long end) |
| { |
| start &= ~(icache_line_size - 1); |
| end = (end + icache_line_size - 1) & ~(icache_line_size - 1); |
| |
| while (start != end) { |
| cache_set_op(Index_Invalidate_I, start & icache_index_mask); |
| start += icache_line_size; |
| } |
| mispredict(); |
| sync(); |
| } |
| |
| |
| /* |
| * Invalidate all caches on this CPU |
| */ |
| static void __attribute_used__ local_sb1___flush_cache_all(void) |
| { |
| __sb1_writeback_inv_dcache_all(); |
| __sb1_flush_icache_all(); |
| } |
| |
| #ifdef CONFIG_SMP |
| void sb1___flush_cache_all_ipi(void *ignored) |
| __attribute__((alias("local_sb1___flush_cache_all"))); |
| |
| static void sb1___flush_cache_all(void) |
| { |
| on_each_cpu(sb1___flush_cache_all_ipi, 0, 1, 1); |
| } |
| #else |
| void sb1___flush_cache_all(void) |
| __attribute__((alias("local_sb1___flush_cache_all"))); |
| #endif |
| |
| /* |
| * When flushing a range in the icache, we have to first writeback |
| * the dcache for the same range, so new ifetches will see any |
| * data that was dirty in the dcache. |
| * |
| * The start/end arguments are Kseg addresses (possibly mapped Kseg). |
| */ |
| |
| static void local_sb1_flush_icache_range(unsigned long start, |
| unsigned long end) |
| { |
| /* Just wb-inv the whole dcache if the range is big enough */ |
| if ((end - start) > dcache_range_cutoff) |
| __sb1_writeback_inv_dcache_all(); |
| else |
| __sb1_writeback_inv_dcache_range(start, end); |
| |
| /* Just flush the whole icache if the range is big enough */ |
| if ((end - start) > icache_range_cutoff) |
| __sb1_flush_icache_all(); |
| else |
| __sb1_flush_icache_range(start, end); |
| } |
| |
| #ifdef CONFIG_SMP |
| struct flush_icache_range_args { |
| unsigned long start; |
| unsigned long end; |
| }; |
| |
| static void sb1_flush_icache_range_ipi(void *info) |
| { |
| struct flush_icache_range_args *args = info; |
| |
| local_sb1_flush_icache_range(args->start, args->end); |
| } |
| |
| void sb1_flush_icache_range(unsigned long start, unsigned long end) |
| { |
| struct flush_icache_range_args args; |
| |
| args.start = start; |
| args.end = end; |
| on_each_cpu(sb1_flush_icache_range_ipi, &args, 1, 1); |
| } |
| #else |
| void sb1_flush_icache_range(unsigned long start, unsigned long end) |
| __attribute__((alias("local_sb1_flush_icache_range"))); |
| #endif |
| |
| /* |
| * Flush the icache for a given physical page. Need to writeback the |
| * dcache first, then invalidate the icache. If the page isn't |
| * executable, nothing is required. |
| */ |
| static void local_sb1_flush_icache_page(struct vm_area_struct *vma, |
| struct page *page) |
| { |
| unsigned long start; |
| int cpu = smp_processor_id(); |
| |
| #ifndef CONFIG_SMP |
| if (!(vma->vm_flags & VM_EXEC)) |
| return; |
| #endif |
| |
| /* Need to writeback any dirty data for that page, we have the PA */ |
| start = (unsigned long)(page-mem_map) << PAGE_SHIFT; |
| __sb1_writeback_inv_dcache_phys_range(start, start + PAGE_SIZE); |
| /* |
| * If there's a context, bump the ASID (cheaper than a flush, |
| * since we don't know VAs!) |
| */ |
| if (cpu_context(cpu, vma->vm_mm) != 0) { |
| drop_mmu_context(vma->vm_mm, cpu); |
| } |
| } |
| |
| #ifdef CONFIG_SMP |
| struct flush_icache_page_args { |
| struct vm_area_struct *vma; |
| struct page *page; |
| }; |
| |
| static void sb1_flush_icache_page_ipi(void *info) |
| { |
| struct flush_icache_page_args *args = info; |
| local_sb1_flush_icache_page(args->vma, args->page); |
| } |
| |
| /* Dirty dcache could be on another CPU, so do the IPIs */ |
| static void sb1_flush_icache_page(struct vm_area_struct *vma, |
| struct page *page) |
| { |
| struct flush_icache_page_args args; |
| |
| if (!(vma->vm_flags & VM_EXEC)) |
| return; |
| args.vma = vma; |
| args.page = page; |
| on_each_cpu(sb1_flush_icache_page_ipi, (void *) &args, 1, 1); |
| } |
| #else |
| void sb1_flush_icache_page(struct vm_area_struct *vma, struct page *page) |
| __attribute__((alias("local_sb1_flush_icache_page"))); |
| #endif |
| |
| /* |
| * A signal trampoline must fit into a single cacheline. |
| */ |
| static void local_sb1_flush_cache_sigtramp(unsigned long addr) |
| { |
| cache_set_op(Index_Writeback_Inv_D, addr & dcache_index_mask); |
| cache_set_op(Index_Writeback_Inv_D, (addr ^ (1<<12)) & dcache_index_mask); |
| cache_set_op(Index_Invalidate_I, addr & icache_index_mask); |
| mispredict(); |
| } |
| |
| #ifdef CONFIG_SMP |
| static void sb1_flush_cache_sigtramp_ipi(void *info) |
| { |
| unsigned long iaddr = (unsigned long) info; |
| local_sb1_flush_cache_sigtramp(iaddr); |
| } |
| |
| static void sb1_flush_cache_sigtramp(unsigned long addr) |
| { |
| on_each_cpu(sb1_flush_cache_sigtramp_ipi, (void *) addr, 1, 1); |
| } |
| #else |
| void sb1_flush_cache_sigtramp(unsigned long addr) |
| __attribute__((alias("local_sb1_flush_cache_sigtramp"))); |
| #endif |
| |
| |
| /* |
| * Anything that just flushes dcache state can be ignored, as we're always |
| * coherent in dcache space. This is just a dummy function that all the |
| * nop'ed routines point to |
| */ |
| static void sb1_nop(void) |
| { |
| } |
| |
| /* |
| * Cache set values (from the mips64 spec) |
| * 0 - 64 |
| * 1 - 128 |
| * 2 - 256 |
| * 3 - 512 |
| * 4 - 1024 |
| * 5 - 2048 |
| * 6 - 4096 |
| * 7 - Reserved |
| */ |
| |
| static unsigned int decode_cache_sets(unsigned int config_field) |
| { |
| if (config_field == 7) { |
| /* JDCXXX - Find a graceful way to abort. */ |
| return 0; |
| } |
| return (1<<(config_field + 6)); |
| } |
| |
| /* |
| * Cache line size values (from the mips64 spec) |
| * 0 - No cache present. |
| * 1 - 4 bytes |
| * 2 - 8 bytes |
| * 3 - 16 bytes |
| * 4 - 32 bytes |
| * 5 - 64 bytes |
| * 6 - 128 bytes |
| * 7 - Reserved |
| */ |
| |
| static unsigned int decode_cache_line_size(unsigned int config_field) |
| { |
| if (config_field == 0) { |
| return 0; |
| } else if (config_field == 7) { |
| /* JDCXXX - Find a graceful way to abort. */ |
| return 0; |
| } |
| return (1<<(config_field + 1)); |
| } |
| |
| /* |
| * Relevant bits of the config1 register format (from the MIPS32/MIPS64 specs) |
| * |
| * 24:22 Icache sets per way |
| * 21:19 Icache line size |
| * 18:16 Icache Associativity |
| * 15:13 Dcache sets per way |
| * 12:10 Dcache line size |
| * 9:7 Dcache Associativity |
| */ |
| |
| static char *way_string[] = { |
| "direct mapped", "2-way", "3-way", "4-way", |
| "5-way", "6-way", "7-way", "8-way", |
| }; |
| |
| static __init void probe_cache_sizes(void) |
| { |
| u32 config1; |
| |
| config1 = read_c0_config1(); |
| icache_line_size = decode_cache_line_size((config1 >> 19) & 0x7); |
| dcache_line_size = decode_cache_line_size((config1 >> 10) & 0x7); |
| icache_sets = decode_cache_sets((config1 >> 22) & 0x7); |
| dcache_sets = decode_cache_sets((config1 >> 13) & 0x7); |
| icache_assoc = ((config1 >> 16) & 0x7) + 1; |
| dcache_assoc = ((config1 >> 7) & 0x7) + 1; |
| icache_size = icache_line_size * icache_sets * icache_assoc; |
| dcache_size = dcache_line_size * dcache_sets * dcache_assoc; |
| /* Need to remove non-index bits for index ops */ |
| icache_index_mask = (icache_sets - 1) * icache_line_size; |
| dcache_index_mask = (dcache_sets - 1) * dcache_line_size; |
| /* |
| * These are for choosing range (index ops) versus all. |
| * icache flushes all ways for each set, so drop icache_assoc. |
| * dcache flushes all ways and each setting of bit 12 for each |
| * index, so drop dcache_assoc and halve the dcache_sets. |
| */ |
| icache_range_cutoff = icache_sets * icache_line_size; |
| dcache_range_cutoff = (dcache_sets / 2) * icache_line_size; |
| |
| printk("Primary instruction cache %ldkB, %s, linesize %d bytes.\n", |
| icache_size >> 10, way_string[icache_assoc - 1], |
| icache_line_size); |
| printk("Primary data cache %ldkB, %s, linesize %d bytes.\n", |
| dcache_size >> 10, way_string[dcache_assoc - 1], |
| dcache_line_size); |
| } |
| |
| /* |
| * This is called from loadmmu.c. We have to set up all the |
| * memory management function pointers, as well as initialize |
| * the caches and tlbs |
| */ |
| void ld_mmu_sb1(void) |
| { |
| extern char except_vec2_sb1; |
| extern char handle_vec2_sb1; |
| |
| /* Special cache error handler for SB1 */ |
| memcpy((void *)(CAC_BASE + 0x100), &except_vec2_sb1, 0x80); |
| memcpy((void *)(UNCAC_BASE + 0x100), &except_vec2_sb1, 0x80); |
| memcpy((void *)CKSEG1ADDR(&handle_vec2_sb1), &handle_vec2_sb1, 0x80); |
| |
| probe_cache_sizes(); |
| |
| #ifdef CONFIG_SIBYTE_DMA_PAGEOPS |
| sb1_dma_init(); |
| #endif |
| |
| /* |
| * None of these are needed for the SB1 - the Dcache is |
| * physically indexed and tagged, so no virtual aliasing can |
| * occur |
| */ |
| flush_cache_range = (void *) sb1_nop; |
| flush_cache_mm = (void (*)(struct mm_struct *))sb1_nop; |
| flush_cache_all = sb1_nop; |
| |
| /* These routines are for Icache coherence with the Dcache */ |
| flush_icache_range = sb1_flush_icache_range; |
| flush_icache_page = sb1_flush_icache_page; |
| flush_icache_all = __sb1_flush_icache_all; /* local only */ |
| |
| /* This implies an Icache flush too, so can't be nop'ed */ |
| flush_cache_page = sb1_flush_cache_page; |
| |
| flush_cache_sigtramp = sb1_flush_cache_sigtramp; |
| flush_data_cache_page = (void *) sb1_nop; |
| |
| /* Full flush */ |
| __flush_cache_all = sb1___flush_cache_all; |
| |
| change_c0_config(CONF_CM_CMASK, CONF_CM_DEFAULT); |
| |
| /* |
| * This is the only way to force the update of K0 to complete |
| * before subsequent instruction fetch. |
| */ |
| __asm__ __volatile__( |
| ".set push \n" |
| " .set noat \n" |
| " .set noreorder \n" |
| " .set mips3 \n" |
| " " STR(PTR_LA) " $1, 1f \n" |
| " " STR(MTC0) " $1, $14 \n" |
| " eret \n" |
| "1: .set pop" |
| : |
| : |
| : "memory"); |
| |
| flush_cache_all(); |
| } |