include/asm-ia64/sn/bte.h - fp2-dev/kernel/msm - Gitiles

 /*
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  *
  * Copyright (c) 2000-2006 Silicon Graphics, Inc.  All Rights Reserved.
  */


 #ifndef _ASM_IA64_SN_BTE_H
 #define _ASM_IA64_SN_BTE_H

 #include <linux/timer.h>
 #include <linux/spinlock.h>
 #include <linux/cache.h>
 #include <asm/sn/pda.h>
 #include <asm/sn/types.h>
 #include <asm/sn/shub_mmr.h>

 #define IBCT_NOTIFY             (0x1UL << 4)
 #define IBCT_ZFIL_MODE          (0x1UL << 0)

 /* #define BTE_DEBUG */
 /* #define BTE_DEBUG_VERBOSE */

 #ifdef BTE_DEBUG
 #  define BTE_PRINTK(x) printk x	/* Terse */
 #  ifdef BTE_DEBUG_VERBOSE
 #    define BTE_PRINTKV(x) printk x	/* Verbose */
 #  else
 #    define BTE_PRINTKV(x)
 #  endif /* BTE_DEBUG_VERBOSE */
 #else
 #  define BTE_PRINTK(x)
 #  define BTE_PRINTKV(x)
 #endif	/* BTE_DEBUG */


 /* BTE status register only supports 16 bits for length field */
 #define BTE_LEN_BITS (16)
 #define BTE_LEN_MASK ((1 << BTE_LEN_BITS) - 1)
 #define BTE_MAX_XFER ((1 << BTE_LEN_BITS) * L1_CACHE_BYTES)


 /* Define hardware */
 #define BTES_PER_NODE (is_shub2() ? 4 : 2)
 #define MAX_BTES_PER_NODE 4

 #define BTE2OFF_CTRL	0
 #define BTE2OFF_SRC	(SH2_BT_ENG_SRC_ADDR_0 - SH2_BT_ENG_CSR_0)
 #define BTE2OFF_DEST	(SH2_BT_ENG_DEST_ADDR_0 - SH2_BT_ENG_CSR_0)
 #define BTE2OFF_NOTIFY	(SH2_BT_ENG_NOTIF_ADDR_0 - SH2_BT_ENG_CSR_0)

 #define BTE_BASE_ADDR(interface) 				\
     (is_shub2() ? (interface == 0) ? SH2_BT_ENG_CSR_0 :		\
 		  (interface == 1) ? SH2_BT_ENG_CSR_1 :		\
 		  (interface == 2) ? SH2_BT_ENG_CSR_2 :		\
 		  		     SH2_BT_ENG_CSR_3 		\
 		: (interface == 0) ? IIO_IBLS0 : IIO_IBLS1)

 #define BTE_SOURCE_ADDR(base)					\
     (is_shub2() ? base + (BTE2OFF_SRC/8) 			\
 		: base + (BTEOFF_SRC/8))

 #define BTE_DEST_ADDR(base)					\
     (is_shub2() ? base + (BTE2OFF_DEST/8) 			\
 		: base + (BTEOFF_DEST/8))

 #define BTE_CTRL_ADDR(base)					\
     (is_shub2() ? base + (BTE2OFF_CTRL/8) 			\
 		: base + (BTEOFF_CTRL/8))

 #define BTE_NOTIF_ADDR(base)					\
     (is_shub2() ? base + (BTE2OFF_NOTIFY/8) 			\
 		: base + (BTEOFF_NOTIFY/8))

 /* Define hardware modes */
 #define BTE_NOTIFY IBCT_NOTIFY
 #define BTE_NORMAL BTE_NOTIFY
 #define BTE_ZERO_FILL (BTE_NOTIFY | IBCT_ZFIL_MODE)
 /* Use a reserved bit to let the caller specify a wait for any BTE */
 #define BTE_WACQUIRE 0x4000
 /* Use the BTE on the node with the destination memory */
 #define BTE_USE_DEST (BTE_WACQUIRE << 1)
 /* Use any available BTE interface on any node for the transfer */
 #define BTE_USE_ANY (BTE_USE_DEST << 1)
 /* macro to force the IBCT0 value valid */
 #define BTE_VALID_MODE(x) ((x) & (IBCT_NOTIFY | IBCT_ZFIL_MODE))

 #define BTE_ACTIVE		(IBLS_BUSY | IBLS_ERROR)
 #define BTE_WORD_AVAILABLE	(IBLS_BUSY << 1)
 #define BTE_WORD_BUSY		(~BTE_WORD_AVAILABLE)

 /*
  * Some macros to simplify reading.
  * Start with macros to locate the BTE control registers.
  */
 #define BTE_LNSTAT_LOAD(_bte)						\
 			HUB_L(_bte->bte_base_addr)
 #define BTE_LNSTAT_STORE(_bte, _x)					\
 			HUB_S(_bte->bte_base_addr, (_x))
 #define BTE_SRC_STORE(_bte, _x)						\
 ({									\
 		u64 __addr = ((_x) & ~AS_MASK);				\
 		if (is_shub2()) 					\
 			__addr = SH2_TIO_PHYS_TO_DMA(__addr);		\
 		HUB_S(_bte->bte_source_addr, __addr);			\
 })
 #define BTE_DEST_STORE(_bte, _x)					\
 ({									\
 		u64 __addr = ((_x) & ~AS_MASK);				\
 		if (is_shub2()) 					\
 			__addr = SH2_TIO_PHYS_TO_DMA(__addr);		\
 		HUB_S(_bte->bte_destination_addr, __addr);		\
 })
 #define BTE_CTRL_STORE(_bte, _x)					\
 			HUB_S(_bte->bte_control_addr, (_x))
 #define BTE_NOTIF_STORE(_bte, _x)					\
 ({									\
 		u64 __addr = ia64_tpa((_x) & ~AS_MASK);			\
 		if (is_shub2()) 					\
 			__addr = SH2_TIO_PHYS_TO_DMA(__addr);		\
 		HUB_S(_bte->bte_notify_addr, __addr);			\
 })

 #define BTE_START_TRANSFER(_bte, _len, _mode)				\
 	is_shub2() ? BTE_CTRL_STORE(_bte, IBLS_BUSY | (_mode << 24) | _len) \
 		: BTE_LNSTAT_STORE(_bte, _len);				\
 		  BTE_CTRL_STORE(_bte, _mode)

 /* Possible results from bte_copy and bte_unaligned_copy */
 /* The following error codes map into the BTE hardware codes
  * IIO_ICRB_ECODE_* (in shubio.h). The hardware uses
  * an error code of 0 (IIO_ICRB_ECODE_DERR), but we want zero
  * to mean BTE_SUCCESS, so add one (BTEFAIL_OFFSET) to the error
  * codes to give the following error codes.
  */
 #define BTEFAIL_OFFSET	1

 typedef enum {
 	BTE_SUCCESS,		/* 0 is success */
 	BTEFAIL_DIR,		/* Directory error due to IIO access*/
 	BTEFAIL_POISON,		/* poison error on IO access (write to poison page) */
 	BTEFAIL_WERR,		/* Write error (ie WINV to a Read only line) */
 	BTEFAIL_ACCESS,		/* access error (protection violation) */
 	BTEFAIL_PWERR,		/* Partial Write Error */
 	BTEFAIL_PRERR,		/* Partial Read Error */
 	BTEFAIL_TOUT,		/* CRB Time out */
 	BTEFAIL_XTERR,		/* Incoming xtalk pkt had error bit */
 	BTEFAIL_NOTAVAIL,	/* BTE not available */
 } bte_result_t;


 /*
  * Structure defining a bte.  An instance of this
  * structure is created in the nodepda for each
  * bte on that node (as defined by BTES_PER_NODE)
  * This structure contains everything necessary
  * to work with a BTE.
  */
 struct bteinfo_s {
 	volatile u64 notify ____cacheline_aligned;
 	u64 *bte_base_addr ____cacheline_aligned;
 	u64 *bte_source_addr;
 	u64 *bte_destination_addr;
 	u64 *bte_control_addr;
 	u64 *bte_notify_addr;
 	spinlock_t spinlock;
 	cnodeid_t bte_cnode;	/* cnode                            */
 	int bte_error_count;	/* Number of errors encountered     */
 	int bte_num;		/* 0 --> BTE0, 1 --> BTE1           */
 	int cleanup_active;	/* Interface is locked for cleanup  */
 	volatile bte_result_t bh_error;	/* error while processing   */
 	volatile u64 *most_rcnt_na;
 	struct bteinfo_s *btes_to_try[MAX_BTES_PER_NODE];
 };


 /*
  * Function prototypes (functions defined in bte.c, used elsewhere)
  */
 extern bte_result_t bte_copy(u64, u64, u64, u64, void *);
 extern bte_result_t bte_unaligned_copy(u64, u64, u64, u64);
 extern void bte_error_handler(unsigned long);

 #define bte_zero(dest, len, mode, notification) \
 	bte_copy(0, dest, len, ((mode) | BTE_ZERO_FILL), notification)

 /*
  * The following is the prefered way of calling bte_unaligned_copy
  * If the copy is fully cache line aligned, then bte_copy is
  * used instead.  Since bte_copy is inlined, this saves a call
  * stack.  NOTE: bte_copy is called synchronously and does block
  * until the transfer is complete.  In order to get the asynch
  * version of bte_copy, you must perform this check yourself.
  */
 #define BTE_UNALIGNED_COPY(src, dest, len, mode)                        \
 	(((len & L1_CACHE_MASK) || (src & L1_CACHE_MASK) ||             \
 	  (dest & L1_CACHE_MASK)) ?                                     \
 	 bte_unaligned_copy(src, dest, len, mode) :              	\
 	 bte_copy(src, dest, len, mode, NULL))


 #endif	/* _ASM_IA64_SN_BTE_H */
	/*
	* This file is subject to the terms and conditions of the GNU General Public
	* License. See the file "COPYING" in the main directory of this archive
	* for more details.
	*
	* Copyright (c) 2000-2006 Silicon Graphics, Inc. All Rights Reserved.
	*/


	#ifndef _ASM_IA64_SN_BTE_H
	#define _ASM_IA64_SN_BTE_H

	#include <linux/timer.h>
	#include <linux/spinlock.h>
	#include <linux/cache.h>
	#include <asm/sn/pda.h>
	#include <asm/sn/types.h>
	#include <asm/sn/shub_mmr.h>

	#define IBCT_NOTIFY (0x1UL << 4)
	#define IBCT_ZFIL_MODE (0x1UL << 0)

	/* #define BTE_DEBUG */
	/* #define BTE_DEBUG_VERBOSE */

	#ifdef BTE_DEBUG
	# define BTE_PRINTK(x) printk x /* Terse */
	# ifdef BTE_DEBUG_VERBOSE
	# define BTE_PRINTKV(x) printk x /* Verbose */
	# else
	# define BTE_PRINTKV(x)
	# endif /* BTE_DEBUG_VERBOSE */
	#else
	# define BTE_PRINTK(x)
	# define BTE_PRINTKV(x)
	#endif /* BTE_DEBUG */


	/* BTE status register only supports 16 bits for length field */
	#define BTE_LEN_BITS (16)
	#define BTE_LEN_MASK ((1 << BTE_LEN_BITS) - 1)
	#define BTE_MAX_XFER ((1 << BTE_LEN_BITS) * L1_CACHE_BYTES)


	/* Define hardware */
	#define BTES_PER_NODE (is_shub2() ? 4 : 2)
	#define MAX_BTES_PER_NODE 4

	#define BTE2OFF_CTRL 0
	#define BTE2OFF_SRC (SH2_BT_ENG_SRC_ADDR_0 - SH2_BT_ENG_CSR_0)
	#define BTE2OFF_DEST (SH2_BT_ENG_DEST_ADDR_0 - SH2_BT_ENG_CSR_0)
	#define BTE2OFF_NOTIFY (SH2_BT_ENG_NOTIF_ADDR_0 - SH2_BT_ENG_CSR_0)

	#define BTE_BASE_ADDR(interface) \
	(is_shub2() ? (interface == 0) ? SH2_BT_ENG_CSR_0 : \
	(interface == 1) ? SH2_BT_ENG_CSR_1 : \
	(interface == 2) ? SH2_BT_ENG_CSR_2 : \
	SH2_BT_ENG_CSR_3 \
	: (interface == 0) ? IIO_IBLS0 : IIO_IBLS1)

	#define BTE_SOURCE_ADDR(base) \
	(is_shub2() ? base + (BTE2OFF_SRC/8) \
	: base + (BTEOFF_SRC/8))

	#define BTE_DEST_ADDR(base) \
	(is_shub2() ? base + (BTE2OFF_DEST/8) \
	: base + (BTEOFF_DEST/8))

	#define BTE_CTRL_ADDR(base) \
	(is_shub2() ? base + (BTE2OFF_CTRL/8) \
	: base + (BTEOFF_CTRL/8))

	#define BTE_NOTIF_ADDR(base) \
	(is_shub2() ? base + (BTE2OFF_NOTIFY/8) \
	: base + (BTEOFF_NOTIFY/8))

	/* Define hardware modes */
	#define BTE_NOTIFY IBCT_NOTIFY
	#define BTE_NORMAL BTE_NOTIFY
	#define BTE_ZERO_FILL (BTE_NOTIFY \| IBCT_ZFIL_MODE)
	/* Use a reserved bit to let the caller specify a wait for any BTE */
	#define BTE_WACQUIRE 0x4000
	/* Use the BTE on the node with the destination memory */
	#define BTE_USE_DEST (BTE_WACQUIRE << 1)
	/* Use any available BTE interface on any node for the transfer */
	#define BTE_USE_ANY (BTE_USE_DEST << 1)
	/* macro to force the IBCT0 value valid */
	#define BTE_VALID_MODE(x) ((x) & (IBCT_NOTIFY \| IBCT_ZFIL_MODE))

	#define BTE_ACTIVE (IBLS_BUSY \| IBLS_ERROR)
	#define BTE_WORD_AVAILABLE (IBLS_BUSY << 1)
	#define BTE_WORD_BUSY (~BTE_WORD_AVAILABLE)

	/*
	* Some macros to simplify reading.
	* Start with macros to locate the BTE control registers.
	*/
	#define BTE_LNSTAT_LOAD(_bte) \
	HUB_L(_bte->bte_base_addr)
	#define BTE_LNSTAT_STORE(_bte, _x) \
	HUB_S(_bte->bte_base_addr, (_x))
	#define BTE_SRC_STORE(_bte, _x) \
	({ \
	u64 __addr = ((_x) & ~AS_MASK); \
	if (is_shub2()) \
	__addr = SH2_TIO_PHYS_TO_DMA(__addr); \
	HUB_S(_bte->bte_source_addr, __addr); \
	})
	#define BTE_DEST_STORE(_bte, _x) \
	({ \
	u64 __addr = ((_x) & ~AS_MASK); \
	if (is_shub2()) \
	__addr = SH2_TIO_PHYS_TO_DMA(__addr); \
	HUB_S(_bte->bte_destination_addr, __addr); \
	})
	#define BTE_CTRL_STORE(_bte, _x) \
	HUB_S(_bte->bte_control_addr, (_x))
	#define BTE_NOTIF_STORE(_bte, _x) \
	({ \
	u64 __addr = ia64_tpa((_x) & ~AS_MASK); \
	if (is_shub2()) \
	__addr = SH2_TIO_PHYS_TO_DMA(__addr); \
	HUB_S(_bte->bte_notify_addr, __addr); \
	})

	#define BTE_START_TRANSFER(_bte, _len, _mode) \
	is_shub2() ? BTE_CTRL_STORE(_bte, IBLS_BUSY \| (_mode << 24) \| _len) \
	: BTE_LNSTAT_STORE(_bte, _len); \
	BTE_CTRL_STORE(_bte, _mode)

	/* Possible results from bte_copy and bte_unaligned_copy */
	/* The following error codes map into the BTE hardware codes
	* IIO_ICRB_ECODE_* (in shubio.h). The hardware uses
	* an error code of 0 (IIO_ICRB_ECODE_DERR), but we want zero
	* to mean BTE_SUCCESS, so add one (BTEFAIL_OFFSET) to the error
	* codes to give the following error codes.
	*/
	#define BTEFAIL_OFFSET 1

	typedef enum {
	BTE_SUCCESS, /* 0 is success */
	BTEFAIL_DIR, /* Directory error due to IIO access*/
	BTEFAIL_POISON, /* poison error on IO access (write to poison page) */
	BTEFAIL_WERR, /* Write error (ie WINV to a Read only line) */
	BTEFAIL_ACCESS, /* access error (protection violation) */
	BTEFAIL_PWERR, /* Partial Write Error */
	BTEFAIL_PRERR, /* Partial Read Error */
	BTEFAIL_TOUT, /* CRB Time out */
	BTEFAIL_XTERR, /* Incoming xtalk pkt had error bit */
	BTEFAIL_NOTAVAIL, /* BTE not available */
	} bte_result_t;


	/*
	* Structure defining a bte. An instance of this
	* structure is created in the nodepda for each
	* bte on that node (as defined by BTES_PER_NODE)
	* This structure contains everything necessary
	* to work with a BTE.
	*/
	struct bteinfo_s {
	volatile u64 notify ____cacheline_aligned;
	u64 *bte_base_addr ____cacheline_aligned;
	u64 *bte_source_addr;
	u64 *bte_destination_addr;
	u64 *bte_control_addr;
	u64 *bte_notify_addr;
	spinlock_t spinlock;
	cnodeid_t bte_cnode; /* cnode */
	int bte_error_count; /* Number of errors encountered */
	int bte_num; /* 0 --> BTE0, 1 --> BTE1 */
	int cleanup_active; /* Interface is locked for cleanup */
	volatile bte_result_t bh_error; /* error while processing */
	volatile u64 *most_rcnt_na;
	struct bteinfo_s *btes_to_try[MAX_BTES_PER_NODE];
	};


	/*
	* Function prototypes (functions defined in bte.c, used elsewhere)
	*/
	extern bte_result_t bte_copy(u64, u64, u64, u64, void *);
	extern bte_result_t bte_unaligned_copy(u64, u64, u64, u64);
	extern void bte_error_handler(unsigned long);

	#define bte_zero(dest, len, mode, notification) \
	bte_copy(0, dest, len, ((mode) \| BTE_ZERO_FILL), notification)

	/*
	* The following is the prefered way of calling bte_unaligned_copy
	* If the copy is fully cache line aligned, then bte_copy is
	* used instead. Since bte_copy is inlined, this saves a call
	* stack. NOTE: bte_copy is called synchronously and does block
	* until the transfer is complete. In order to get the asynch
	* version of bte_copy, you must perform this check yourself.
	*/
	#define BTE_UNALIGNED_COPY(src, dest, len, mode) \
	(((len & L1_CACHE_MASK) \|\| (src & L1_CACHE_MASK) \|\| \
	(dest & L1_CACHE_MASK)) ? \
	bte_unaligned_copy(src, dest, len, mode) : \
	bte_copy(src, dest, len, mode, NULL))


	#endif /* _ASM_IA64_SN_BTE_H */