| /* Copyright (c) 2011-2013, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| #include <linux/irq.h> |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/slab.h> |
| #include <linux/io.h> |
| #include <linux/interrupt.h> |
| #include <linux/platform_device.h> |
| #include <linux/slimbus/slimbus.h> |
| #include <linux/delay.h> |
| #include <linux/kthread.h> |
| #include <linux/clk.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/of.h> |
| #include <linux/of_slimbus.h> |
| #include <mach/sps.h> |
| #include <mach/qdsp6v2/apr.h> |
| #include "slim-msm.h" |
| |
| #define MSM_SLIM_NAME "msm_slim_ctrl" |
| #define SLIM_ROOT_FREQ 24576000 |
| |
| #define QC_MFGID_LSB 0x2 |
| #define QC_MFGID_MSB 0x17 |
| #define QC_CHIPID_SL 0x10 |
| #define QC_DEVID_SAT1 0x3 |
| #define QC_DEVID_SAT2 0x4 |
| #define QC_DEVID_PGD 0x5 |
| #define QC_MSM_DEVS 5 |
| |
| /* Manager registers */ |
| enum mgr_reg { |
| MGR_CFG = 0x200, |
| MGR_STATUS = 0x204, |
| MGR_RX_MSGQ_CFG = 0x208, |
| MGR_INT_EN = 0x210, |
| MGR_INT_STAT = 0x214, |
| MGR_INT_CLR = 0x218, |
| MGR_TX_MSG = 0x230, |
| MGR_RX_MSG = 0x270, |
| MGR_IE_STAT = 0x2F0, |
| MGR_VE_STAT = 0x300, |
| }; |
| |
| enum msg_cfg { |
| MGR_CFG_ENABLE = 1, |
| MGR_CFG_RX_MSGQ_EN = 1 << 1, |
| MGR_CFG_TX_MSGQ_EN_HIGH = 1 << 2, |
| MGR_CFG_TX_MSGQ_EN_LOW = 1 << 3, |
| }; |
| /* Message queue types */ |
| enum msm_slim_msgq_type { |
| MSGQ_RX = 0, |
| MSGQ_TX_LOW = 1, |
| MSGQ_TX_HIGH = 2, |
| }; |
| /* Framer registers */ |
| enum frm_reg { |
| FRM_CFG = 0x400, |
| FRM_STAT = 0x404, |
| FRM_INT_EN = 0x410, |
| FRM_INT_STAT = 0x414, |
| FRM_INT_CLR = 0x418, |
| FRM_WAKEUP = 0x41C, |
| FRM_CLKCTL_DONE = 0x420, |
| FRM_IE_STAT = 0x430, |
| FRM_VE_STAT = 0x440, |
| }; |
| |
| /* Interface registers */ |
| enum intf_reg { |
| INTF_CFG = 0x600, |
| INTF_STAT = 0x604, |
| INTF_INT_EN = 0x610, |
| INTF_INT_STAT = 0x614, |
| INTF_INT_CLR = 0x618, |
| INTF_IE_STAT = 0x630, |
| INTF_VE_STAT = 0x640, |
| }; |
| |
| enum mgr_intr { |
| MGR_INT_RECFG_DONE = 1 << 24, |
| MGR_INT_TX_NACKED_2 = 1 << 25, |
| MGR_INT_MSG_BUF_CONTE = 1 << 26, |
| MGR_INT_RX_MSG_RCVD = 1 << 30, |
| MGR_INT_TX_MSG_SENT = 1 << 31, |
| }; |
| |
| enum frm_cfg { |
| FRM_ACTIVE = 1, |
| CLK_GEAR = 7, |
| ROOT_FREQ = 11, |
| REF_CLK_GEAR = 15, |
| INTR_WAKE = 19, |
| }; |
| |
| static struct msm_slim_sat *msm_slim_alloc_sat(struct msm_slim_ctrl *dev); |
| |
| static int msm_sat_enqueue(struct msm_slim_sat *sat, u32 *buf, u8 len) |
| { |
| struct msm_slim_ctrl *dev = sat->dev; |
| unsigned long flags; |
| spin_lock_irqsave(&sat->lock, flags); |
| if ((sat->stail + 1) % SAT_CONCUR_MSG == sat->shead) { |
| spin_unlock_irqrestore(&sat->lock, flags); |
| dev_err(dev->dev, "SAT QUEUE full!"); |
| return -EXFULL; |
| } |
| memcpy(sat->sat_msgs[sat->stail], (u8 *)buf, len); |
| sat->stail = (sat->stail + 1) % SAT_CONCUR_MSG; |
| spin_unlock_irqrestore(&sat->lock, flags); |
| return 0; |
| } |
| |
| static int msm_sat_dequeue(struct msm_slim_sat *sat, u8 *buf) |
| { |
| unsigned long flags; |
| spin_lock_irqsave(&sat->lock, flags); |
| if (sat->stail == sat->shead) { |
| spin_unlock_irqrestore(&sat->lock, flags); |
| return -ENODATA; |
| } |
| memcpy(buf, sat->sat_msgs[sat->shead], 40); |
| sat->shead = (sat->shead + 1) % SAT_CONCUR_MSG; |
| spin_unlock_irqrestore(&sat->lock, flags); |
| return 0; |
| } |
| |
| static void msm_get_eaddr(u8 *e_addr, u32 *buffer) |
| { |
| e_addr[0] = (buffer[1] >> 24) & 0xff; |
| e_addr[1] = (buffer[1] >> 16) & 0xff; |
| e_addr[2] = (buffer[1] >> 8) & 0xff; |
| e_addr[3] = buffer[1] & 0xff; |
| e_addr[4] = (buffer[0] >> 24) & 0xff; |
| e_addr[5] = (buffer[0] >> 16) & 0xff; |
| } |
| |
| static bool msm_is_sat_dev(u8 *e_addr) |
| { |
| if (e_addr[5] == QC_MFGID_LSB && e_addr[4] == QC_MFGID_MSB && |
| e_addr[2] != QC_CHIPID_SL && |
| (e_addr[1] == QC_DEVID_SAT1 || e_addr[1] == QC_DEVID_SAT2)) |
| return true; |
| return false; |
| } |
| |
| static struct msm_slim_sat *addr_to_sat(struct msm_slim_ctrl *dev, u8 laddr) |
| { |
| struct msm_slim_sat *sat = NULL; |
| int i = 0; |
| while (!sat && i < dev->nsats) { |
| if (laddr == dev->satd[i]->satcl.laddr) |
| sat = dev->satd[i]; |
| i++; |
| } |
| return sat; |
| } |
| |
| static irqreturn_t msm_slim_interrupt(int irq, void *d) |
| { |
| struct msm_slim_ctrl *dev = d; |
| u32 pstat; |
| u32 stat = readl_relaxed(dev->base + MGR_INT_STAT); |
| |
| if (stat & MGR_INT_TX_MSG_SENT || stat & MGR_INT_TX_NACKED_2) { |
| if (stat & MGR_INT_TX_MSG_SENT) |
| writel_relaxed(MGR_INT_TX_MSG_SENT, |
| dev->base + MGR_INT_CLR); |
| else { |
| u32 mgr_stat = readl_relaxed(dev->base + MGR_STATUS); |
| u32 mgr_ie_stat = readl_relaxed(dev->base + |
| MGR_IE_STAT); |
| u32 frm_stat = readl_relaxed(dev->base + FRM_STAT); |
| u32 frm_cfg = readl_relaxed(dev->base + FRM_CFG); |
| u32 frm_intr_stat = readl_relaxed(dev->base + |
| FRM_INT_STAT); |
| u32 frm_ie_stat = readl_relaxed(dev->base + |
| FRM_IE_STAT); |
| u32 intf_stat = readl_relaxed(dev->base + INTF_STAT); |
| u32 intf_intr_stat = readl_relaxed(dev->base + |
| INTF_INT_STAT); |
| u32 intf_ie_stat = readl_relaxed(dev->base + |
| INTF_IE_STAT); |
| |
| writel_relaxed(MGR_INT_TX_NACKED_2, |
| dev->base + MGR_INT_CLR); |
| pr_err("TX Nack MGR dump:int_stat:0x%x, mgr_stat:0x%x", |
| stat, mgr_stat); |
| pr_err("TX Nack MGR dump:ie_stat:0x%x", mgr_ie_stat); |
| pr_err("TX Nack FRM dump:int_stat:0x%x, frm_stat:0x%x", |
| frm_intr_stat, frm_stat); |
| pr_err("TX Nack FRM dump:frm_cfg:0x%x, ie_stat:0x%x", |
| frm_cfg, frm_ie_stat); |
| pr_err("TX Nack INTF dump:intr_st:0x%x, intf_stat:0x%x", |
| intf_intr_stat, intf_stat); |
| pr_err("TX Nack INTF dump:ie_stat:0x%x", intf_ie_stat); |
| |
| dev->err = -EIO; |
| } |
| /* |
| * Guarantee that interrupt clear bit write goes through before |
| * signalling completion/exiting ISR |
| */ |
| mb(); |
| if (dev->wr_comp) |
| complete(dev->wr_comp); |
| } |
| if (stat & MGR_INT_RX_MSG_RCVD) { |
| u32 rx_buf[10]; |
| u32 mc, mt; |
| u8 len, i; |
| rx_buf[0] = readl_relaxed(dev->base + MGR_RX_MSG); |
| len = rx_buf[0] & 0x1F; |
| for (i = 1; i < ((len + 3) >> 2); i++) { |
| rx_buf[i] = readl_relaxed(dev->base + MGR_RX_MSG + |
| (4 * i)); |
| dev_dbg(dev->dev, "reading data: %x\n", rx_buf[i]); |
| } |
| mt = (rx_buf[0] >> 5) & 0x7; |
| mc = (rx_buf[0] >> 8) & 0xff; |
| dev_dbg(dev->dev, "MC: %x, MT: %x\n", mc, mt); |
| if (mt == SLIM_MSG_MT_DEST_REFERRED_USER || |
| mt == SLIM_MSG_MT_SRC_REFERRED_USER) { |
| u8 laddr = (u8)((rx_buf[0] >> 16) & 0xFF); |
| struct msm_slim_sat *sat = addr_to_sat(dev, laddr); |
| if (sat) |
| msm_sat_enqueue(sat, rx_buf, len); |
| else |
| dev_err(dev->dev, "unknown sat:%d message", |
| laddr); |
| writel_relaxed(MGR_INT_RX_MSG_RCVD, |
| dev->base + MGR_INT_CLR); |
| /* |
| * Guarantee that CLR bit write goes through before |
| * queuing work |
| */ |
| mb(); |
| if (sat) |
| queue_work(sat->wq, &sat->wd); |
| } else if (mt == SLIM_MSG_MT_CORE && |
| mc == SLIM_MSG_MC_REPORT_PRESENT) { |
| u8 e_addr[6]; |
| msm_get_eaddr(e_addr, rx_buf); |
| msm_slim_rx_enqueue(dev, rx_buf, len); |
| writel_relaxed(MGR_INT_RX_MSG_RCVD, dev->base + |
| MGR_INT_CLR); |
| /* |
| * Guarantee that CLR bit write goes through |
| * before signalling completion |
| */ |
| mb(); |
| complete(&dev->rx_msgq_notify); |
| } else if (mt == SLIM_MSG_MT_CORE && |
| mc == SLIM_MSG_MC_REPORT_ABSENT) { |
| writel_relaxed(MGR_INT_RX_MSG_RCVD, dev->base + |
| MGR_INT_CLR); |
| /* |
| * Guarantee that CLR bit write goes through |
| * before signalling completion |
| */ |
| mb(); |
| complete(&dev->rx_msgq_notify); |
| |
| } else if (mc == SLIM_MSG_MC_REPLY_INFORMATION || |
| mc == SLIM_MSG_MC_REPLY_VALUE) { |
| msm_slim_rx_enqueue(dev, rx_buf, len); |
| writel_relaxed(MGR_INT_RX_MSG_RCVD, dev->base + |
| MGR_INT_CLR); |
| /* |
| * Guarantee that CLR bit write goes through |
| * before signalling completion |
| */ |
| mb(); |
| complete(&dev->rx_msgq_notify); |
| } else if (mc == SLIM_MSG_MC_REPORT_INFORMATION) { |
| u8 *buf = (u8 *)rx_buf; |
| u8 l_addr = buf[2]; |
| u16 ele = (u16)buf[4] << 4; |
| ele |= ((buf[3] & 0xf0) >> 4); |
| dev_err(dev->dev, "Slim-dev:%d report inf element:0x%x", |
| l_addr, ele); |
| for (i = 0; i < len - 5; i++) |
| dev_err(dev->dev, "offset:0x%x:bit mask:%x", |
| i, buf[i+5]); |
| writel_relaxed(MGR_INT_RX_MSG_RCVD, dev->base + |
| MGR_INT_CLR); |
| /* |
| * Guarantee that CLR bit write goes through |
| * before exiting |
| */ |
| mb(); |
| } else { |
| dev_err(dev->dev, "Unexpected MC,%x MT:%x, len:%d", |
| mc, mt, len); |
| for (i = 0; i < ((len + 3) >> 2); i++) |
| dev_err(dev->dev, "error msg: %x", rx_buf[i]); |
| writel_relaxed(MGR_INT_RX_MSG_RCVD, dev->base + |
| MGR_INT_CLR); |
| /* |
| * Guarantee that CLR bit write goes through |
| * before exiting |
| */ |
| mb(); |
| } |
| } |
| if (stat & MGR_INT_RECFG_DONE) { |
| writel_relaxed(MGR_INT_RECFG_DONE, dev->base + MGR_INT_CLR); |
| /* |
| * Guarantee that CLR bit write goes through |
| * before exiting ISR |
| */ |
| mb(); |
| complete(&dev->reconf); |
| } |
| pstat = readl_relaxed(PGD_THIS_EE(PGD_PORT_INT_ST_EEn, dev->ver)); |
| if (pstat != 0) { |
| return msm_slim_port_irq_handler(dev, pstat); |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int msm_xfer_msg(struct slim_controller *ctrl, struct slim_msg_txn *txn) |
| { |
| DECLARE_COMPLETION_ONSTACK(done); |
| struct msm_slim_ctrl *dev = slim_get_ctrldata(ctrl); |
| u32 *pbuf; |
| u8 *puc; |
| int timeout; |
| int msgv = -1; |
| u8 la = txn->la; |
| u8 mc = (u8)(txn->mc & 0xFF); |
| /* |
| * Voting for runtime PM: Slimbus has 2 possible use cases: |
| * 1. messaging |
| * 2. Data channels |
| * Messaging case goes through messaging slots and data channels |
| * use their own slots |
| * This "get" votes for messaging bandwidth |
| */ |
| if (!(txn->mc & SLIM_MSG_CLK_PAUSE_SEQ_FLG)) |
| msgv = msm_slim_get_ctrl(dev); |
| mutex_lock(&dev->tx_lock); |
| if (dev->state == MSM_CTRL_ASLEEP || |
| ((!(txn->mc & SLIM_MSG_CLK_PAUSE_SEQ_FLG)) && |
| dev->state == MSM_CTRL_SLEEPING)) { |
| dev_err(dev->dev, "runtime or system PM suspended state"); |
| mutex_unlock(&dev->tx_lock); |
| if (msgv >= 0) |
| msm_slim_put_ctrl(dev); |
| return -EBUSY; |
| } |
| if (txn->mt == SLIM_MSG_MT_CORE && |
| mc == SLIM_MSG_MC_BEGIN_RECONFIGURATION) { |
| if (dev->reconf_busy) { |
| wait_for_completion(&dev->reconf); |
| dev->reconf_busy = false; |
| } |
| /* This "get" votes for data channels */ |
| if (dev->ctrl.sched.usedslots != 0 && |
| !dev->chan_active) { |
| int chv = msm_slim_get_ctrl(dev); |
| if (chv >= 0) |
| dev->chan_active = true; |
| } |
| } |
| txn->rl--; |
| pbuf = msm_get_msg_buf(dev, txn->rl); |
| dev->wr_comp = NULL; |
| dev->err = 0; |
| |
| if (txn->dt == SLIM_MSG_DEST_ENUMADDR) { |
| mutex_unlock(&dev->tx_lock); |
| if (msgv >= 0) |
| msm_slim_put_ctrl(dev); |
| return -EPROTONOSUPPORT; |
| } |
| if (txn->mt == SLIM_MSG_MT_CORE && txn->la == 0xFF && |
| (mc == SLIM_MSG_MC_CONNECT_SOURCE || |
| mc == SLIM_MSG_MC_CONNECT_SINK || |
| mc == SLIM_MSG_MC_DISCONNECT_PORT)) |
| la = dev->pgdla; |
| if (txn->dt == SLIM_MSG_DEST_LOGICALADDR) |
| *pbuf = SLIM_MSG_ASM_FIRST_WORD(txn->rl, txn->mt, mc, 0, la); |
| else |
| *pbuf = SLIM_MSG_ASM_FIRST_WORD(txn->rl, txn->mt, mc, 1, la); |
| if (txn->dt == SLIM_MSG_DEST_LOGICALADDR) |
| puc = ((u8 *)pbuf) + 3; |
| else |
| puc = ((u8 *)pbuf) + 2; |
| if (txn->rbuf) |
| *(puc++) = txn->tid; |
| if ((txn->mt == SLIM_MSG_MT_CORE) && |
| ((mc >= SLIM_MSG_MC_REQUEST_INFORMATION && |
| mc <= SLIM_MSG_MC_REPORT_INFORMATION) || |
| (mc >= SLIM_MSG_MC_REQUEST_VALUE && |
| mc <= SLIM_MSG_MC_CHANGE_VALUE))) { |
| *(puc++) = (txn->ec & 0xFF); |
| *(puc++) = (txn->ec >> 8)&0xFF; |
| } |
| if (txn->wbuf) |
| memcpy(puc, txn->wbuf, txn->len); |
| if (txn->mt == SLIM_MSG_MT_CORE && txn->la == 0xFF && |
| (mc == SLIM_MSG_MC_CONNECT_SOURCE || |
| mc == SLIM_MSG_MC_CONNECT_SINK || |
| mc == SLIM_MSG_MC_DISCONNECT_PORT)) { |
| if (mc != SLIM_MSG_MC_DISCONNECT_PORT) |
| dev->err = msm_slim_connect_pipe_port(dev, *puc); |
| else { |
| /* |
| * Remove channel disconnects master-side ports from |
| * channel. No need to send that again on the bus |
| * Only disable port |
| */ |
| writel_relaxed(0, PGD_PORT(PGD_PORT_CFGn, |
| (*puc + dev->port_b), dev->ver)); |
| mutex_unlock(&dev->tx_lock); |
| if (msgv >= 0) |
| msm_slim_put_ctrl(dev); |
| return 0; |
| } |
| if (dev->err) { |
| dev_err(dev->dev, "pipe-port connect err:%d", dev->err); |
| mutex_unlock(&dev->tx_lock); |
| if (msgv >= 0) |
| msm_slim_put_ctrl(dev); |
| return dev->err; |
| } |
| *(puc) = *(puc) + dev->port_b; |
| } |
| if (txn->mt == SLIM_MSG_MT_CORE && |
| mc == SLIM_MSG_MC_BEGIN_RECONFIGURATION) |
| dev->reconf_busy = true; |
| dev->wr_comp = &done; |
| msm_send_msg_buf(dev, pbuf, txn->rl, MGR_TX_MSG); |
| timeout = wait_for_completion_timeout(&done, HZ); |
| if (!timeout) |
| dev->wr_comp = NULL; |
| if (mc == SLIM_MSG_MC_RECONFIGURE_NOW) { |
| if ((txn->mc == (SLIM_MSG_MC_RECONFIGURE_NOW | |
| SLIM_MSG_CLK_PAUSE_SEQ_FLG)) && |
| timeout) { |
| timeout = wait_for_completion_timeout(&dev->reconf, HZ); |
| dev->reconf_busy = false; |
| if (timeout) { |
| clk_disable_unprepare(dev->rclk); |
| disable_irq(dev->irq); |
| } |
| } |
| if ((txn->mc == (SLIM_MSG_MC_RECONFIGURE_NOW | |
| SLIM_MSG_CLK_PAUSE_SEQ_FLG)) && |
| !timeout) { |
| dev->reconf_busy = false; |
| dev_err(dev->dev, "clock pause failed"); |
| mutex_unlock(&dev->tx_lock); |
| return -ETIMEDOUT; |
| } |
| if (txn->mt == SLIM_MSG_MT_CORE && |
| txn->mc == SLIM_MSG_MC_RECONFIGURE_NOW) { |
| if (dev->ctrl.sched.usedslots == 0 && |
| dev->chan_active) { |
| dev->chan_active = false; |
| msm_slim_put_ctrl(dev); |
| } |
| } |
| } |
| mutex_unlock(&dev->tx_lock); |
| if (msgv >= 0) |
| msm_slim_put_ctrl(dev); |
| |
| if (!timeout) |
| dev_err(dev->dev, "TX timed out:MC:0x%x,mt:0x%x", txn->mc, |
| txn->mt); |
| |
| return timeout ? dev->err : -ETIMEDOUT; |
| } |
| |
| static void msm_slim_wait_retry(struct msm_slim_ctrl *dev) |
| { |
| int msec_per_frm = 0; |
| int sfr_per_sec; |
| /* Wait for 1 superframe, or default time and then retry */ |
| sfr_per_sec = dev->framer.superfreq / |
| (1 << (SLIM_MAX_CLK_GEAR - dev->ctrl.clkgear)); |
| if (sfr_per_sec) |
| msec_per_frm = MSEC_PER_SEC / sfr_per_sec; |
| if (msec_per_frm < DEF_RETRY_MS) |
| msec_per_frm = DEF_RETRY_MS; |
| msleep(msec_per_frm); |
| } |
| static int msm_set_laddr(struct slim_controller *ctrl, const u8 *ea, |
| u8 elen, u8 laddr) |
| { |
| struct msm_slim_ctrl *dev = slim_get_ctrldata(ctrl); |
| struct completion done; |
| int timeout, ret, retries = 0; |
| u32 *buf; |
| retry_laddr: |
| init_completion(&done); |
| mutex_lock(&dev->tx_lock); |
| buf = msm_get_msg_buf(dev, 9); |
| buf[0] = SLIM_MSG_ASM_FIRST_WORD(9, SLIM_MSG_MT_CORE, |
| SLIM_MSG_MC_ASSIGN_LOGICAL_ADDRESS, |
| SLIM_MSG_DEST_LOGICALADDR, |
| ea[5] | ea[4] << 8); |
| buf[1] = ea[3] | (ea[2] << 8) | (ea[1] << 16) | (ea[0] << 24); |
| buf[2] = laddr; |
| |
| dev->wr_comp = &done; |
| ret = msm_send_msg_buf(dev, buf, 9, MGR_TX_MSG); |
| timeout = wait_for_completion_timeout(&done, HZ); |
| if (!timeout) |
| dev->err = -ETIMEDOUT; |
| if (dev->err) { |
| ret = dev->err; |
| dev->err = 0; |
| dev->wr_comp = NULL; |
| } |
| mutex_unlock(&dev->tx_lock); |
| if (ret) { |
| pr_err("set LADDR:0x%x failed:ret:%d, retrying", laddr, ret); |
| if (retries < INIT_MX_RETRIES) { |
| msm_slim_wait_retry(dev); |
| retries++; |
| goto retry_laddr; |
| } else { |
| pr_err("set LADDR failed after retrying:ret:%d", ret); |
| } |
| } |
| return ret; |
| } |
| |
| static int msm_clk_pause_wakeup(struct slim_controller *ctrl) |
| { |
| struct msm_slim_ctrl *dev = slim_get_ctrldata(ctrl); |
| enable_irq(dev->irq); |
| clk_prepare_enable(dev->rclk); |
| writel_relaxed(1, dev->base + FRM_WAKEUP); |
| /* Make sure framer wakeup write goes through before exiting function */ |
| mb(); |
| /* |
| * Workaround: Currently, slave is reporting lost-sync messages |
| * after slimbus comes out of clock pause. |
| * Transaction with slave fail before slave reports that message |
| * Give some time for that report to come |
| * Slimbus wakes up in clock gear 10 at 24.576MHz. With each superframe |
| * being 250 usecs, we wait for 20 superframes here to ensure |
| * we get the message |
| */ |
| usleep_range(5000, 5000); |
| return 0; |
| } |
| |
| static int msm_sat_define_ch(struct msm_slim_sat *sat, u8 *buf, u8 len, u8 mc) |
| { |
| struct msm_slim_ctrl *dev = sat->dev; |
| enum slim_ch_control oper; |
| int i; |
| int ret = 0; |
| if (mc == SLIM_USR_MC_CHAN_CTRL) { |
| for (i = 0; i < sat->nsatch; i++) { |
| if (buf[5] == sat->satch[i].chan) |
| break; |
| } |
| if (i >= sat->nsatch) |
| return -ENOTCONN; |
| oper = ((buf[3] & 0xC0) >> 6); |
| /* part of grp. activating/removing 1 will take care of rest */ |
| ret = slim_control_ch(&sat->satcl, sat->satch[i].chanh, oper, |
| false); |
| if (!ret) { |
| for (i = 5; i < len; i++) { |
| int j; |
| for (j = 0; j < sat->nsatch; j++) { |
| if (buf[i] == sat->satch[j].chan) { |
| if (oper == SLIM_CH_REMOVE) |
| sat->satch[j].req_rem++; |
| else |
| sat->satch[j].req_def++; |
| break; |
| } |
| } |
| } |
| } |
| } else { |
| u16 chh[40]; |
| struct slim_ch prop; |
| u32 exp; |
| u16 *grph = NULL; |
| u8 coeff, cc; |
| u8 prrate = buf[6]; |
| if (len <= 8) |
| return -EINVAL; |
| for (i = 8; i < len; i++) { |
| int j = 0; |
| for (j = 0; j < sat->nsatch; j++) { |
| if (sat->satch[j].chan == buf[i]) { |
| chh[i - 8] = sat->satch[j].chanh; |
| break; |
| } |
| } |
| if (j < sat->nsatch) { |
| u16 dummy; |
| ret = slim_query_ch(&sat->satcl, buf[i], |
| &dummy); |
| if (ret) |
| return ret; |
| if (mc == SLIM_USR_MC_DEF_ACT_CHAN) |
| sat->satch[j].req_def++; |
| /* First channel in group from satellite */ |
| if (i == 8) |
| grph = &sat->satch[j].chanh; |
| continue; |
| } |
| if (sat->nsatch >= MSM_MAX_SATCH) |
| return -EXFULL; |
| ret = slim_query_ch(&sat->satcl, buf[i], &chh[i - 8]); |
| if (ret) |
| return ret; |
| sat->satch[j].chan = buf[i]; |
| sat->satch[j].chanh = chh[i - 8]; |
| if (mc == SLIM_USR_MC_DEF_ACT_CHAN) |
| sat->satch[j].req_def++; |
| if (i == 8) |
| grph = &sat->satch[j].chanh; |
| sat->nsatch++; |
| } |
| prop.dataf = (enum slim_ch_dataf)((buf[3] & 0xE0) >> 5); |
| prop.auxf = (enum slim_ch_auxf)((buf[4] & 0xC0) >> 5); |
| prop.baser = SLIM_RATE_4000HZ; |
| if (prrate & 0x8) |
| prop.baser = SLIM_RATE_11025HZ; |
| else |
| prop.baser = SLIM_RATE_4000HZ; |
| prop.prot = (enum slim_ch_proto)(buf[5] & 0x0F); |
| prop.sampleszbits = (buf[4] & 0x1F)*SLIM_CL_PER_SL; |
| exp = (u32)((buf[5] & 0xF0) >> 4); |
| coeff = (buf[4] & 0x20) >> 5; |
| cc = (coeff ? 3 : 1); |
| prop.ratem = cc * (1 << exp); |
| if (i > 9) |
| ret = slim_define_ch(&sat->satcl, &prop, chh, len - 8, |
| true, &chh[0]); |
| else |
| ret = slim_define_ch(&sat->satcl, &prop, |
| chh, 1, true, &chh[0]); |
| dev_dbg(dev->dev, "define sat grp returned:%d", ret); |
| if (ret) |
| return ret; |
| else if (grph) |
| *grph = chh[0]; |
| |
| /* part of group so activating 1 will take care of rest */ |
| if (mc == SLIM_USR_MC_DEF_ACT_CHAN) |
| ret = slim_control_ch(&sat->satcl, |
| chh[0], |
| SLIM_CH_ACTIVATE, false); |
| } |
| return ret; |
| } |
| |
| static void msm_slim_rxwq(struct msm_slim_ctrl *dev) |
| { |
| u8 buf[40]; |
| u8 mc, mt, len; |
| int i, ret; |
| if ((msm_slim_rx_dequeue(dev, (u8 *)buf)) != -ENODATA) { |
| len = buf[0] & 0x1F; |
| mt = (buf[0] >> 5) & 0x7; |
| mc = buf[1]; |
| if (mt == SLIM_MSG_MT_CORE && |
| mc == SLIM_MSG_MC_REPORT_PRESENT) { |
| u8 laddr; |
| u8 e_addr[6]; |
| for (i = 0; i < 6; i++) |
| e_addr[i] = buf[7-i]; |
| |
| ret = slim_assign_laddr(&dev->ctrl, e_addr, 6, &laddr, |
| false); |
| /* Is this Qualcomm ported generic device? */ |
| if (!ret && e_addr[5] == QC_MFGID_LSB && |
| e_addr[4] == QC_MFGID_MSB && |
| e_addr[1] == QC_DEVID_PGD && |
| e_addr[2] != QC_CHIPID_SL) |
| dev->pgdla = laddr; |
| if (!ret && !pm_runtime_enabled(dev->dev) && |
| laddr == (QC_MSM_DEVS - 1)) |
| pm_runtime_enable(dev->dev); |
| |
| if (!ret && msm_is_sat_dev(e_addr)) { |
| struct msm_slim_sat *sat = addr_to_sat(dev, |
| laddr); |
| if (!sat) |
| sat = msm_slim_alloc_sat(dev); |
| if (!sat) |
| return; |
| |
| sat->satcl.laddr = laddr; |
| msm_sat_enqueue(sat, (u32 *)buf, len); |
| queue_work(sat->wq, &sat->wd); |
| } |
| if (ret) |
| pr_err("assign laddr failed, error:%d", ret); |
| } else if (mc == SLIM_MSG_MC_REPLY_INFORMATION || |
| mc == SLIM_MSG_MC_REPLY_VALUE) { |
| u8 tid = buf[3]; |
| dev_dbg(dev->dev, "tid:%d, len:%d\n", tid, len - 4); |
| slim_msg_response(&dev->ctrl, &buf[4], tid, |
| len - 4); |
| pm_runtime_mark_last_busy(dev->dev); |
| } else if (mc == SLIM_MSG_MC_REPORT_INFORMATION) { |
| u8 l_addr = buf[2]; |
| u16 ele = (u16)buf[4] << 4; |
| ele |= ((buf[3] & 0xf0) >> 4); |
| dev_err(dev->dev, "Slim-dev:%d report inf element:0x%x", |
| l_addr, ele); |
| for (i = 0; i < len - 5; i++) |
| dev_err(dev->dev, "offset:0x%x:bit mask:%x", |
| i, buf[i+5]); |
| } else { |
| dev_err(dev->dev, "unexpected message:mc:%x, mt:%x", |
| mc, mt); |
| for (i = 0; i < len; i++) |
| dev_err(dev->dev, "error msg: %x", buf[i]); |
| |
| } |
| } else |
| dev_err(dev->dev, "rxwq called and no dequeue"); |
| } |
| |
| static void slim_sat_rxprocess(struct work_struct *work) |
| { |
| struct msm_slim_sat *sat = container_of(work, struct msm_slim_sat, wd); |
| struct msm_slim_ctrl *dev = sat->dev; |
| u8 buf[40]; |
| |
| while ((msm_sat_dequeue(sat, buf)) != -ENODATA) { |
| struct slim_msg_txn txn; |
| u8 len, mc, mt; |
| u32 bw_sl; |
| int ret = 0; |
| int satv = -1; |
| bool gen_ack = false; |
| u8 tid; |
| u8 wbuf[8]; |
| int i, retries = 0; |
| txn.mt = SLIM_MSG_MT_SRC_REFERRED_USER; |
| txn.dt = SLIM_MSG_DEST_LOGICALADDR; |
| txn.ec = 0; |
| txn.rbuf = NULL; |
| txn.la = sat->satcl.laddr; |
| /* satellite handling */ |
| len = buf[0] & 0x1F; |
| mc = buf[1]; |
| mt = (buf[0] >> 5) & 0x7; |
| |
| if (mt == SLIM_MSG_MT_CORE && |
| mc == SLIM_MSG_MC_REPORT_PRESENT) { |
| u8 e_addr[6]; |
| for (i = 0; i < 6; i++) |
| e_addr[i] = buf[7-i]; |
| |
| if (pm_runtime_enabled(dev->dev)) { |
| satv = msm_slim_get_ctrl(dev); |
| if (satv >= 0) |
| sat->pending_capability = true; |
| } |
| /* |
| * Since capability message is already sent, present |
| * message will indicate subsystem hosting this |
| * satellite has restarted. |
| * Remove all active channels of this satellite |
| * when this is detected |
| */ |
| if (sat->sent_capability) { |
| for (i = 0; i < sat->nsatch; i++) { |
| if (sat->satch[i].reconf) { |
| pr_err("SSR, sat:%d, rm ch:%d", |
| sat->satcl.laddr, |
| sat->satch[i].chan); |
| slim_control_ch(&sat->satcl, |
| sat->satch[i].chanh, |
| SLIM_CH_REMOVE, true); |
| slim_dealloc_ch(&sat->satcl, |
| sat->satch[i].chanh); |
| sat->satch[i].reconf = false; |
| } |
| } |
| } |
| } else if (mt != SLIM_MSG_MT_CORE && |
| mc != SLIM_MSG_MC_REPORT_PRESENT) { |
| satv = msm_slim_get_ctrl(dev); |
| } |
| switch (mc) { |
| case SLIM_MSG_MC_REPORT_PRESENT: |
| /* Remove runtime_pm vote once satellite acks */ |
| if (mt != SLIM_MSG_MT_CORE) { |
| if (pm_runtime_enabled(dev->dev) && |
| sat->pending_capability) { |
| msm_slim_put_ctrl(dev); |
| sat->pending_capability = false; |
| } |
| continue; |
| } |
| /* send a Manager capability msg */ |
| if (sat->sent_capability) { |
| if (mt == SLIM_MSG_MT_CORE) |
| goto send_capability; |
| else |
| continue; |
| } |
| ret = slim_add_device(&dev->ctrl, &sat->satcl); |
| if (ret) { |
| dev_err(dev->dev, |
| "Satellite-init failed"); |
| continue; |
| } |
| /* Satellite-channels */ |
| sat->satch = kzalloc(MSM_MAX_SATCH * |
| sizeof(struct msm_sat_chan), |
| GFP_KERNEL); |
| send_capability: |
| txn.mc = SLIM_USR_MC_MASTER_CAPABILITY; |
| txn.mt = SLIM_MSG_MT_SRC_REFERRED_USER; |
| txn.la = sat->satcl.laddr; |
| txn.rl = 8; |
| wbuf[0] = SAT_MAGIC_LSB; |
| wbuf[1] = SAT_MAGIC_MSB; |
| wbuf[2] = SAT_MSG_VER; |
| wbuf[3] = SAT_MSG_PROT; |
| txn.wbuf = wbuf; |
| txn.len = 4; |
| ret = msm_xfer_msg(&dev->ctrl, &txn); |
| if (ret) { |
| pr_err("capability for:0x%x fail:%d, retry:%d", |
| sat->satcl.laddr, ret, retries); |
| if (retries < INIT_MX_RETRIES) { |
| msm_slim_wait_retry(dev); |
| retries++; |
| goto send_capability; |
| } else { |
| pr_err("failed after all retries:%d", |
| ret); |
| } |
| } else { |
| sat->sent_capability = true; |
| } |
| break; |
| case SLIM_USR_MC_ADDR_QUERY: |
| memcpy(&wbuf[1], &buf[4], 6); |
| ret = slim_get_logical_addr(&sat->satcl, |
| &wbuf[1], 6, &wbuf[7]); |
| if (ret) |
| memset(&wbuf[1], 0, 6); |
| wbuf[0] = buf[3]; |
| txn.mc = SLIM_USR_MC_ADDR_REPLY; |
| txn.rl = 12; |
| txn.len = 8; |
| txn.wbuf = wbuf; |
| msm_xfer_msg(&dev->ctrl, &txn); |
| break; |
| case SLIM_USR_MC_DEFINE_CHAN: |
| case SLIM_USR_MC_DEF_ACT_CHAN: |
| case SLIM_USR_MC_CHAN_CTRL: |
| if (mc != SLIM_USR_MC_CHAN_CTRL) |
| tid = buf[7]; |
| else |
| tid = buf[4]; |
| gen_ack = true; |
| ret = msm_sat_define_ch(sat, buf, len, mc); |
| if (ret) { |
| dev_err(dev->dev, |
| "SAT define_ch returned:%d", |
| ret); |
| } |
| if (!sat->pending_reconf) { |
| int chv = msm_slim_get_ctrl(dev); |
| if (chv >= 0) |
| sat->pending_reconf = true; |
| } |
| break; |
| case SLIM_USR_MC_RECONFIG_NOW: |
| tid = buf[3]; |
| gen_ack = true; |
| ret = slim_reconfigure_now(&sat->satcl); |
| for (i = 0; i < sat->nsatch; i++) { |
| struct msm_sat_chan *sch = &sat->satch[i]; |
| if (sch->req_rem && sch->reconf) { |
| if (!ret) { |
| slim_dealloc_ch(&sat->satcl, |
| sch->chanh); |
| sch->reconf = false; |
| } |
| sch->req_rem--; |
| } else if (sch->req_def) { |
| if (ret) |
| slim_dealloc_ch(&sat->satcl, |
| sch->chanh); |
| else |
| sch->reconf = true; |
| sch->req_def--; |
| } |
| } |
| if (sat->pending_reconf) { |
| msm_slim_put_ctrl(dev); |
| sat->pending_reconf = false; |
| } |
| break; |
| case SLIM_USR_MC_REQ_BW: |
| /* what we get is in SLOTS */ |
| bw_sl = (u32)buf[4] << 3 | |
| ((buf[3] & 0xE0) >> 5); |
| sat->satcl.pending_msgsl = bw_sl; |
| tid = buf[5]; |
| gen_ack = true; |
| break; |
| case SLIM_USR_MC_CONNECT_SRC: |
| case SLIM_USR_MC_CONNECT_SINK: |
| if (mc == SLIM_USR_MC_CONNECT_SRC) |
| txn.mc = SLIM_MSG_MC_CONNECT_SOURCE; |
| else |
| txn.mc = SLIM_MSG_MC_CONNECT_SINK; |
| wbuf[0] = buf[4] & 0x1F; |
| wbuf[1] = buf[5]; |
| tid = buf[6]; |
| txn.la = buf[3]; |
| txn.mt = SLIM_MSG_MT_CORE; |
| txn.rl = 6; |
| txn.len = 2; |
| txn.wbuf = wbuf; |
| gen_ack = true; |
| ret = msm_xfer_msg(&dev->ctrl, &txn); |
| break; |
| case SLIM_USR_MC_DISCONNECT_PORT: |
| txn.mc = SLIM_MSG_MC_DISCONNECT_PORT; |
| wbuf[0] = buf[4] & 0x1F; |
| tid = buf[5]; |
| txn.la = buf[3]; |
| txn.rl = 5; |
| txn.len = 1; |
| txn.mt = SLIM_MSG_MT_CORE; |
| txn.wbuf = wbuf; |
| gen_ack = true; |
| ret = msm_xfer_msg(&dev->ctrl, &txn); |
| break; |
| case SLIM_MSG_MC_REPORT_ABSENT: |
| dev_info(dev->dev, "Received Report Absent Message\n"); |
| break; |
| default: |
| break; |
| } |
| if (!gen_ack) { |
| if (mc != SLIM_MSG_MC_REPORT_PRESENT && satv >= 0) |
| msm_slim_put_ctrl(dev); |
| continue; |
| } |
| |
| wbuf[0] = tid; |
| if (!ret) |
| wbuf[1] = MSM_SAT_SUCCSS; |
| else |
| wbuf[1] = 0; |
| txn.mc = SLIM_USR_MC_GENERIC_ACK; |
| txn.la = sat->satcl.laddr; |
| txn.rl = 6; |
| txn.len = 2; |
| txn.wbuf = wbuf; |
| txn.mt = SLIM_MSG_MT_SRC_REFERRED_USER; |
| msm_xfer_msg(&dev->ctrl, &txn); |
| if (satv >= 0) |
| msm_slim_put_ctrl(dev); |
| } |
| } |
| |
| static struct msm_slim_sat *msm_slim_alloc_sat(struct msm_slim_ctrl *dev) |
| { |
| struct msm_slim_sat *sat; |
| char *name; |
| if (dev->nsats >= MSM_MAX_NSATS) |
| return NULL; |
| |
| sat = kzalloc(sizeof(struct msm_slim_sat), GFP_KERNEL); |
| if (!sat) { |
| dev_err(dev->dev, "no memory for satellite"); |
| return NULL; |
| } |
| name = kzalloc(SLIMBUS_NAME_SIZE, GFP_KERNEL); |
| if (!name) { |
| dev_err(dev->dev, "no memory for satellite name"); |
| kfree(sat); |
| return NULL; |
| } |
| dev->satd[dev->nsats] = sat; |
| sat->dev = dev; |
| snprintf(name, SLIMBUS_NAME_SIZE, "msm_sat%d", dev->nsats); |
| sat->satcl.name = name; |
| spin_lock_init(&sat->lock); |
| INIT_WORK(&sat->wd, slim_sat_rxprocess); |
| sat->wq = create_singlethread_workqueue(sat->satcl.name); |
| if (!sat->wq) { |
| kfree(name); |
| kfree(sat); |
| return NULL; |
| } |
| /* |
| * Both sats will be allocated from RX thread and RX thread will |
| * process messages sequentially. No synchronization necessary |
| */ |
| dev->nsats++; |
| return sat; |
| } |
| |
| static int msm_slim_rx_msgq_thread(void *data) |
| { |
| struct msm_slim_ctrl *dev = (struct msm_slim_ctrl *)data; |
| struct completion *notify = &dev->rx_msgq_notify; |
| struct msm_slim_sat *sat = NULL; |
| u32 mc = 0; |
| u32 mt = 0; |
| u32 buffer[10]; |
| int index = 0; |
| u8 msg_len = 0; |
| int ret; |
| |
| dev_dbg(dev->dev, "rx thread started"); |
| |
| while (!kthread_should_stop()) { |
| set_current_state(TASK_INTERRUPTIBLE); |
| ret = wait_for_completion_interruptible(notify); |
| |
| if (ret) |
| dev_err(dev->dev, "rx thread wait error:%d", ret); |
| |
| /* 1 irq notification per message */ |
| if (dev->use_rx_msgqs != MSM_MSGQ_ENABLED) { |
| msm_slim_rxwq(dev); |
| continue; |
| } |
| |
| ret = msm_slim_rx_msgq_get(dev, buffer, index); |
| if (ret) { |
| dev_err(dev->dev, "rx_msgq_get() failed 0x%x\n", ret); |
| continue; |
| } |
| |
| pr_debug("message[%d] = 0x%x\n", index, *buffer); |
| |
| /* Decide if we use generic RX or satellite RX */ |
| if (index++ == 0) { |
| msg_len = *buffer & 0x1F; |
| pr_debug("Start of new message, len = %d\n", msg_len); |
| mt = (buffer[0] >> 5) & 0x7; |
| mc = (buffer[0] >> 8) & 0xff; |
| dev_dbg(dev->dev, "MC: %x, MT: %x\n", mc, mt); |
| if (mt == SLIM_MSG_MT_DEST_REFERRED_USER || |
| mt == SLIM_MSG_MT_SRC_REFERRED_USER) { |
| u8 laddr; |
| laddr = (u8)((buffer[0] >> 16) & 0xff); |
| sat = addr_to_sat(dev, laddr); |
| } |
| } |
| if ((index * 4) >= msg_len) { |
| index = 0; |
| if (sat) { |
| msm_sat_enqueue(sat, buffer, msg_len); |
| queue_work(sat->wq, &sat->wd); |
| sat = NULL; |
| } else { |
| msm_slim_rx_enqueue(dev, buffer, msg_len); |
| msm_slim_rxwq(dev); |
| } |
| } |
| } |
| |
| return 0; |
| } |
| |
| static void msm_slim_prg_slew(struct platform_device *pdev, |
| struct msm_slim_ctrl *dev) |
| { |
| struct resource *slew_io; |
| void __iomem *slew_reg; |
| /* SLEW RATE register for this slimbus */ |
| dev->slew_mem = platform_get_resource_byname(pdev, IORESOURCE_MEM, |
| "slimbus_slew_reg"); |
| if (!dev->slew_mem) { |
| dev_dbg(&pdev->dev, "no slimbus slew resource\n"); |
| return; |
| } |
| slew_io = request_mem_region(dev->slew_mem->start, |
| resource_size(dev->slew_mem), pdev->name); |
| if (!slew_io) { |
| dev_dbg(&pdev->dev, "slimbus-slew mem claimed\n"); |
| dev->slew_mem = NULL; |
| return; |
| } |
| |
| slew_reg = ioremap(dev->slew_mem->start, resource_size(dev->slew_mem)); |
| if (!slew_reg) { |
| dev_dbg(dev->dev, "slew register mapping failed"); |
| release_mem_region(dev->slew_mem->start, |
| resource_size(dev->slew_mem)); |
| dev->slew_mem = NULL; |
| return; |
| } |
| writel_relaxed(1, slew_reg); |
| /* Make sure slimbus-slew rate enabling goes through */ |
| wmb(); |
| iounmap(slew_reg); |
| } |
| |
| static int __devinit msm_slim_probe(struct platform_device *pdev) |
| { |
| struct msm_slim_ctrl *dev; |
| int ret; |
| enum apr_subsys_state q6_state; |
| struct resource *bam_mem, *bam_io; |
| struct resource *slim_mem, *slim_io; |
| struct resource *irq, *bam_irq; |
| bool rxreg_access = false; |
| |
| q6_state = apr_get_q6_state(); |
| if (q6_state == APR_SUBSYS_DOWN) { |
| dev_dbg(&pdev->dev, "defering %s, adsp_state %d\n", __func__, |
| q6_state); |
| return -EPROBE_DEFER; |
| } else |
| dev_dbg(&pdev->dev, "adsp is ready\n"); |
| |
| slim_mem = platform_get_resource_byname(pdev, IORESOURCE_MEM, |
| "slimbus_physical"); |
| if (!slim_mem) { |
| dev_err(&pdev->dev, "no slimbus physical memory resource\n"); |
| return -ENODEV; |
| } |
| slim_io = request_mem_region(slim_mem->start, resource_size(slim_mem), |
| pdev->name); |
| if (!slim_io) { |
| dev_err(&pdev->dev, "slimbus memory already claimed\n"); |
| return -EBUSY; |
| } |
| |
| bam_mem = platform_get_resource_byname(pdev, IORESOURCE_MEM, |
| "slimbus_bam_physical"); |
| if (!bam_mem) { |
| dev_err(&pdev->dev, "no slimbus BAM memory resource\n"); |
| ret = -ENODEV; |
| goto err_get_res_bam_failed; |
| } |
| bam_io = request_mem_region(bam_mem->start, resource_size(bam_mem), |
| pdev->name); |
| if (!bam_io) { |
| release_mem_region(slim_mem->start, resource_size(slim_mem)); |
| dev_err(&pdev->dev, "slimbus BAM memory already claimed\n"); |
| ret = -EBUSY; |
| goto err_get_res_bam_failed; |
| } |
| irq = platform_get_resource_byname(pdev, IORESOURCE_IRQ, |
| "slimbus_irq"); |
| if (!irq) { |
| dev_err(&pdev->dev, "no slimbus IRQ resource\n"); |
| ret = -ENODEV; |
| goto err_get_res_failed; |
| } |
| bam_irq = platform_get_resource_byname(pdev, IORESOURCE_IRQ, |
| "slimbus_bam_irq"); |
| if (!bam_irq) { |
| dev_err(&pdev->dev, "no slimbus BAM IRQ resource\n"); |
| ret = -ENODEV; |
| goto err_get_res_failed; |
| } |
| |
| dev = kzalloc(sizeof(struct msm_slim_ctrl), GFP_KERNEL); |
| if (!dev) { |
| dev_err(&pdev->dev, "no memory for MSM slimbus controller\n"); |
| ret = -ENOMEM; |
| goto err_get_res_failed; |
| } |
| dev->dev = &pdev->dev; |
| platform_set_drvdata(pdev, dev); |
| slim_set_ctrldata(&dev->ctrl, dev); |
| dev->base = ioremap(slim_mem->start, resource_size(slim_mem)); |
| if (!dev->base) { |
| dev_err(&pdev->dev, "IOremap failed\n"); |
| ret = -ENOMEM; |
| goto err_ioremap_failed; |
| } |
| dev->bam.base = ioremap(bam_mem->start, resource_size(bam_mem)); |
| if (!dev->bam.base) { |
| dev_err(&pdev->dev, "BAM IOremap failed\n"); |
| ret = -ENOMEM; |
| goto err_ioremap_bam_failed; |
| } |
| if (pdev->dev.of_node) { |
| |
| ret = of_property_read_u32(pdev->dev.of_node, "cell-index", |
| &dev->ctrl.nr); |
| if (ret) { |
| dev_err(&pdev->dev, "Cell index not specified:%d", ret); |
| goto err_of_init_failed; |
| } |
| rxreg_access = of_property_read_bool(pdev->dev.of_node, |
| "qcom,rxreg-access"); |
| /* Optional properties */ |
| ret = of_property_read_u32(pdev->dev.of_node, |
| "qcom,min-clk-gear", &dev->ctrl.min_cg); |
| ret = of_property_read_u32(pdev->dev.of_node, |
| "qcom,max-clk-gear", &dev->ctrl.max_cg); |
| pr_debug("min_cg:%d, max_cg:%d, rxreg: %d", dev->ctrl.min_cg, |
| dev->ctrl.max_cg, rxreg_access); |
| } else { |
| dev->ctrl.nr = pdev->id; |
| } |
| dev->ctrl.nchans = MSM_SLIM_NCHANS; |
| dev->ctrl.nports = MSM_SLIM_NPORTS; |
| dev->ctrl.set_laddr = msm_set_laddr; |
| dev->ctrl.xfer_msg = msm_xfer_msg; |
| dev->ctrl.wakeup = msm_clk_pause_wakeup; |
| dev->ctrl.alloc_port = msm_alloc_port; |
| dev->ctrl.dealloc_port = msm_dealloc_port; |
| dev->ctrl.port_xfer = msm_slim_port_xfer; |
| dev->ctrl.port_xfer_status = msm_slim_port_xfer_status; |
| /* Reserve some messaging BW for satellite-apps driver communication */ |
| dev->ctrl.sched.pending_msgsl = 30; |
| |
| init_completion(&dev->reconf); |
| mutex_init(&dev->tx_lock); |
| spin_lock_init(&dev->rx_lock); |
| dev->ee = 1; |
| if (rxreg_access) |
| dev->use_rx_msgqs = MSM_MSGQ_DISABLED; |
| else |
| dev->use_rx_msgqs = MSM_MSGQ_RESET; |
| |
| dev->irq = irq->start; |
| dev->bam.irq = bam_irq->start; |
| |
| dev->hclk = clk_get(dev->dev, "iface_clk"); |
| if (IS_ERR(dev->hclk)) |
| dev->hclk = NULL; |
| else |
| clk_prepare_enable(dev->hclk); |
| |
| ret = msm_slim_sps_init(dev, bam_mem, MGR_STATUS, false); |
| if (ret != 0) { |
| dev_err(dev->dev, "error SPS init\n"); |
| goto err_sps_init_failed; |
| } |
| |
| /* Fire up the Rx message queue thread */ |
| dev->rx_msgq_thread = kthread_run(msm_slim_rx_msgq_thread, dev, |
| MSM_SLIM_NAME "_rx_msgq_thread"); |
| if (IS_ERR(dev->rx_msgq_thread)) { |
| ret = PTR_ERR(dev->rx_msgq_thread); |
| dev_err(dev->dev, "Failed to start Rx message queue thread\n"); |
| goto err_thread_create_failed; |
| } |
| |
| dev->framer.rootfreq = SLIM_ROOT_FREQ >> 3; |
| dev->framer.superfreq = |
| dev->framer.rootfreq / SLIM_CL_PER_SUPERFRAME_DIV8; |
| dev->ctrl.a_framer = &dev->framer; |
| dev->ctrl.clkgear = SLIM_MAX_CLK_GEAR; |
| dev->ctrl.dev.parent = &pdev->dev; |
| dev->ctrl.dev.of_node = pdev->dev.of_node; |
| |
| ret = request_irq(dev->irq, msm_slim_interrupt, IRQF_TRIGGER_HIGH, |
| "msm_slim_irq", dev); |
| if (ret) { |
| dev_err(&pdev->dev, "request IRQ failed\n"); |
| goto err_request_irq_failed; |
| } |
| |
| msm_slim_prg_slew(pdev, dev); |
| |
| /* Register with framework before enabling frame, clock */ |
| ret = slim_add_numbered_controller(&dev->ctrl); |
| if (ret) { |
| dev_err(dev->dev, "error adding controller\n"); |
| goto err_ctrl_failed; |
| } |
| |
| |
| dev->rclk = clk_get(dev->dev, "core_clk"); |
| if (!dev->rclk) { |
| dev_err(dev->dev, "slimbus clock not found"); |
| goto err_clk_get_failed; |
| } |
| clk_set_rate(dev->rclk, SLIM_ROOT_FREQ); |
| clk_prepare_enable(dev->rclk); |
| |
| dev->ver = readl_relaxed(dev->base); |
| /* Version info in 16 MSbits */ |
| dev->ver >>= 16; |
| /* Component register initialization */ |
| writel_relaxed(1, dev->base + CFG_PORT(COMP_CFG, dev->ver)); |
| writel_relaxed((EE_MGR_RSC_GRP | EE_NGD_2 | EE_NGD_1), |
| dev->base + CFG_PORT(COMP_TRUST_CFG, dev->ver)); |
| |
| /* |
| * Manager register initialization |
| * If RX msg Q is used, disable RX_MSG_RCVD interrupt |
| */ |
| if (dev->use_rx_msgqs == MSM_MSGQ_ENABLED) |
| writel_relaxed((MGR_INT_RECFG_DONE | MGR_INT_TX_NACKED_2 | |
| MGR_INT_MSG_BUF_CONTE | /* MGR_INT_RX_MSG_RCVD | */ |
| MGR_INT_TX_MSG_SENT), dev->base + MGR_INT_EN); |
| else |
| writel_relaxed((MGR_INT_RECFG_DONE | MGR_INT_TX_NACKED_2 | |
| MGR_INT_MSG_BUF_CONTE | MGR_INT_RX_MSG_RCVD | |
| MGR_INT_TX_MSG_SENT), dev->base + MGR_INT_EN); |
| writel_relaxed(1, dev->base + MGR_CFG); |
| /* |
| * Framer registers are beyond 1K memory region after Manager and/or |
| * component registers. Make sure those writes are ordered |
| * before framer register writes |
| */ |
| wmb(); |
| |
| /* Framer register initialization */ |
| writel_relaxed((1 << INTR_WAKE) | (0xA << REF_CLK_GEAR) | |
| (0xA << CLK_GEAR) | (1 << ROOT_FREQ) | (1 << FRM_ACTIVE) | 1, |
| dev->base + FRM_CFG); |
| /* |
| * Make sure that framer wake-up and enabling writes go through |
| * before any other component is enabled. Framer is responsible for |
| * clocking the bus and enabling framer first will ensure that other |
| * devices can report presence when they are enabled |
| */ |
| mb(); |
| |
| /* Enable RX msg Q */ |
| if (dev->use_rx_msgqs == MSM_MSGQ_ENABLED) |
| writel_relaxed(MGR_CFG_ENABLE | MGR_CFG_RX_MSGQ_EN, |
| dev->base + MGR_CFG); |
| else |
| writel_relaxed(MGR_CFG_ENABLE, dev->base + MGR_CFG); |
| /* |
| * Make sure that manager-enable is written through before interface |
| * device is enabled |
| */ |
| mb(); |
| writel_relaxed(1, dev->base + INTF_CFG); |
| /* |
| * Make sure that interface-enable is written through before enabling |
| * ported generic device inside MSM manager |
| */ |
| mb(); |
| writel_relaxed(1, dev->base + CFG_PORT(PGD_CFG, dev->ver)); |
| writel_relaxed(0x3F<<17, dev->base + CFG_PORT(PGD_OWN_EEn, dev->ver) + |
| (4 * dev->ee)); |
| /* |
| * Make sure that ported generic device is enabled and port-EE settings |
| * are written through before finally enabling the component |
| */ |
| mb(); |
| |
| writel_relaxed(1, dev->base + CFG_PORT(COMP_CFG, dev->ver)); |
| /* |
| * Make sure that all writes have gone through before exiting this |
| * function |
| */ |
| mb(); |
| |
| /* Add devices registered with board-info now that controller is up */ |
| slim_ctrl_add_boarddevs(&dev->ctrl); |
| |
| if (pdev->dev.of_node) |
| of_register_slim_devices(&dev->ctrl); |
| |
| pm_runtime_use_autosuspend(&pdev->dev); |
| pm_runtime_set_autosuspend_delay(&pdev->dev, MSM_SLIM_AUTOSUSPEND); |
| pm_runtime_set_active(&pdev->dev); |
| |
| dev_dbg(dev->dev, "MSM SB controller is up!\n"); |
| return 0; |
| |
| err_ctrl_failed: |
| writel_relaxed(0, dev->base + CFG_PORT(COMP_CFG, dev->ver)); |
| err_clk_get_failed: |
| kfree(dev->satd); |
| err_request_irq_failed: |
| kthread_stop(dev->rx_msgq_thread); |
| err_thread_create_failed: |
| msm_slim_sps_exit(dev, true); |
| err_sps_init_failed: |
| if (dev->hclk) { |
| clk_disable_unprepare(dev->hclk); |
| clk_put(dev->hclk); |
| } |
| err_of_init_failed: |
| iounmap(dev->bam.base); |
| err_ioremap_bam_failed: |
| iounmap(dev->base); |
| err_ioremap_failed: |
| kfree(dev); |
| err_get_res_failed: |
| release_mem_region(bam_mem->start, resource_size(bam_mem)); |
| err_get_res_bam_failed: |
| release_mem_region(slim_mem->start, resource_size(slim_mem)); |
| return ret; |
| } |
| |
| static int __devexit msm_slim_remove(struct platform_device *pdev) |
| { |
| struct msm_slim_ctrl *dev = platform_get_drvdata(pdev); |
| struct resource *bam_mem; |
| struct resource *slim_mem; |
| struct resource *slew_mem = dev->slew_mem; |
| int i; |
| for (i = 0; i < dev->nsats; i++) { |
| struct msm_slim_sat *sat = dev->satd[i]; |
| int j; |
| for (j = 0; j < sat->nsatch; j++) |
| slim_dealloc_ch(&sat->satcl, sat->satch[j].chanh); |
| slim_remove_device(&sat->satcl); |
| kfree(sat->satch); |
| destroy_workqueue(sat->wq); |
| kfree(sat->satcl.name); |
| kfree(sat); |
| } |
| pm_runtime_disable(&pdev->dev); |
| pm_runtime_set_suspended(&pdev->dev); |
| free_irq(dev->irq, dev); |
| slim_del_controller(&dev->ctrl); |
| clk_put(dev->rclk); |
| if (dev->hclk) |
| clk_put(dev->hclk); |
| msm_slim_sps_exit(dev, true); |
| kthread_stop(dev->rx_msgq_thread); |
| iounmap(dev->bam.base); |
| iounmap(dev->base); |
| kfree(dev); |
| bam_mem = platform_get_resource_byname(pdev, IORESOURCE_MEM, |
| "slimbus_bam_physical"); |
| if (bam_mem) |
| release_mem_region(bam_mem->start, resource_size(bam_mem)); |
| if (slew_mem) |
| release_mem_region(slew_mem->start, resource_size(slew_mem)); |
| slim_mem = platform_get_resource_byname(pdev, IORESOURCE_MEM, |
| "slimbus_physical"); |
| if (slim_mem) |
| release_mem_region(slim_mem->start, resource_size(slim_mem)); |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM_RUNTIME |
| static int msm_slim_runtime_idle(struct device *device) |
| { |
| dev_dbg(device, "pm_runtime: idle...\n"); |
| pm_request_autosuspend(device); |
| return -EAGAIN; |
| } |
| #endif |
| |
| /* |
| * If PM_RUNTIME is not defined, these 2 functions become helper |
| * functions to be called from system suspend/resume. So they are not |
| * inside ifdef CONFIG_PM_RUNTIME |
| */ |
| #ifdef CONFIG_PM_SLEEP |
| static int msm_slim_runtime_suspend(struct device *device) |
| { |
| struct platform_device *pdev = to_platform_device(device); |
| struct msm_slim_ctrl *dev = platform_get_drvdata(pdev); |
| int ret; |
| dev_dbg(device, "pm_runtime: suspending...\n"); |
| dev->state = MSM_CTRL_SLEEPING; |
| ret = slim_ctrl_clk_pause(&dev->ctrl, false, SLIM_CLK_UNSPECIFIED); |
| if (ret) { |
| dev_err(device, "clk pause not entered:%d", ret); |
| dev->state = MSM_CTRL_AWAKE; |
| } else { |
| dev->state = MSM_CTRL_ASLEEP; |
| } |
| return ret; |
| } |
| |
| static int msm_slim_runtime_resume(struct device *device) |
| { |
| struct platform_device *pdev = to_platform_device(device); |
| struct msm_slim_ctrl *dev = platform_get_drvdata(pdev); |
| int ret = 0; |
| dev_dbg(device, "pm_runtime: resuming...\n"); |
| if (dev->state == MSM_CTRL_ASLEEP) |
| ret = slim_ctrl_clk_pause(&dev->ctrl, true, 0); |
| if (ret) { |
| dev_err(device, "clk pause not exited:%d", ret); |
| dev->state = MSM_CTRL_ASLEEP; |
| } else { |
| dev->state = MSM_CTRL_AWAKE; |
| } |
| return ret; |
| } |
| |
| static int msm_slim_suspend(struct device *dev) |
| { |
| int ret = 0; |
| if (!pm_runtime_enabled(dev) || !pm_runtime_suspended(dev)) { |
| struct platform_device *pdev = to_platform_device(dev); |
| struct msm_slim_ctrl *cdev = platform_get_drvdata(pdev); |
| dev_dbg(dev, "system suspend"); |
| ret = msm_slim_runtime_suspend(dev); |
| if (!ret) { |
| if (cdev->hclk) |
| clk_disable_unprepare(cdev->hclk); |
| } |
| } |
| if (ret == -EBUSY) { |
| /* |
| * If the clock pause failed due to active channels, there is |
| * a possibility that some audio stream is active during suspend |
| * We dont want to return suspend failure in that case so that |
| * display and relevant components can still go to suspend. |
| * If there is some other error, then it should be passed-on |
| * to system level suspend |
| */ |
| ret = 0; |
| } |
| return ret; |
| } |
| |
| static int msm_slim_resume(struct device *dev) |
| { |
| /* If runtime_pm is enabled, this resume shouldn't do anything */ |
| if (!pm_runtime_enabled(dev) || !pm_runtime_suspended(dev)) { |
| struct platform_device *pdev = to_platform_device(dev); |
| struct msm_slim_ctrl *cdev = platform_get_drvdata(pdev); |
| int ret; |
| dev_dbg(dev, "system resume"); |
| if (cdev->hclk) |
| clk_prepare_enable(cdev->hclk); |
| ret = msm_slim_runtime_resume(dev); |
| if (!ret) { |
| pm_runtime_mark_last_busy(dev); |
| pm_request_autosuspend(dev); |
| } |
| return ret; |
| |
| } |
| return 0; |
| } |
| #endif /* CONFIG_PM_SLEEP */ |
| |
| static const struct dev_pm_ops msm_slim_dev_pm_ops = { |
| SET_SYSTEM_SLEEP_PM_OPS( |
| msm_slim_suspend, |
| msm_slim_resume |
| ) |
| SET_RUNTIME_PM_OPS( |
| msm_slim_runtime_suspend, |
| msm_slim_runtime_resume, |
| msm_slim_runtime_idle |
| ) |
| }; |
| |
| static struct of_device_id msm_slim_dt_match[] = { |
| { |
| .compatible = "qcom,slim-msm", |
| }, |
| {} |
| }; |
| |
| static struct platform_driver msm_slim_driver = { |
| .probe = msm_slim_probe, |
| .remove = msm_slim_remove, |
| .driver = { |
| .name = MSM_SLIM_NAME, |
| .owner = THIS_MODULE, |
| .pm = &msm_slim_dev_pm_ops, |
| .of_match_table = msm_slim_dt_match, |
| }, |
| }; |
| |
| static int msm_slim_init(void) |
| { |
| return platform_driver_register(&msm_slim_driver); |
| } |
| subsys_initcall(msm_slim_init); |
| |
| static void msm_slim_exit(void) |
| { |
| platform_driver_unregister(&msm_slim_driver); |
| } |
| module_exit(msm_slim_exit); |
| |
| MODULE_LICENSE("GPL v2"); |
| MODULE_VERSION("0.1"); |
| MODULE_DESCRIPTION("MSM Slimbus controller"); |
| MODULE_ALIAS("platform:msm-slim"); |