| /* |
| * This file is part of wl1271 |
| * |
| * Copyright (C) 2009-2010 Nokia Corporation |
| * |
| * Contact: Luciano Coelho <luciano.coelho@nokia.com> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA |
| * 02110-1301 USA |
| * |
| */ |
| |
| #include <linux/ieee80211.h> |
| |
| #include "wl12xx.h" |
| #include "debug.h" |
| #include "cmd.h" |
| #include "scan.h" |
| #include "acx.h" |
| #include "ps.h" |
| #include "tx.h" |
| |
| void wl1271_scan_complete_work(struct work_struct *work) |
| { |
| struct delayed_work *dwork; |
| struct wl1271 *wl; |
| struct ieee80211_vif *vif; |
| struct wl12xx_vif *wlvif; |
| int ret; |
| bool is_sta, is_ibss; |
| |
| dwork = container_of(work, struct delayed_work, work); |
| wl = container_of(dwork, struct wl1271, scan_complete_work); |
| |
| wl1271_debug(DEBUG_SCAN, "Scanning complete"); |
| |
| mutex_lock(&wl->mutex); |
| |
| if (wl->state == WL1271_STATE_OFF) |
| goto out; |
| |
| if (wl->scan.state == WL1271_SCAN_STATE_IDLE) |
| goto out; |
| |
| vif = wl->scan_vif; |
| wlvif = wl12xx_vif_to_data(vif); |
| |
| wl->scan.state = WL1271_SCAN_STATE_IDLE; |
| memset(wl->scan.scanned_ch, 0, sizeof(wl->scan.scanned_ch)); |
| wl->scan.req = NULL; |
| wl->scan_vif = NULL; |
| |
| ret = wl1271_ps_elp_wakeup(wl); |
| if (ret < 0) |
| goto out; |
| |
| if (test_bit(WLVIF_FLAG_STA_ASSOCIATED, &wlvif->flags)) { |
| /* restore hardware connection monitoring template */ |
| wl1271_cmd_build_ap_probe_req(wl, wlvif, wlvif->probereq); |
| } |
| |
| /* return to ROC if needed */ |
| is_sta = (wlvif->bss_type == BSS_TYPE_STA_BSS); |
| is_ibss = (wlvif->bss_type == BSS_TYPE_IBSS); |
| if (((is_sta && !test_bit(WLVIF_FLAG_STA_ASSOCIATED, &wlvif->flags)) || |
| (is_ibss && !test_bit(WLVIF_FLAG_IBSS_JOINED, &wlvif->flags))) && |
| !test_bit(wlvif->dev_role_id, wl->roc_map)) { |
| /* restore remain on channel */ |
| wl12xx_start_dev(wl, wlvif); |
| } |
| wl1271_ps_elp_sleep(wl); |
| |
| if (wl->scan.failed) { |
| wl1271_info("Scan completed due to error."); |
| wl12xx_queue_recovery_work(wl); |
| } |
| |
| ieee80211_scan_completed(wl->hw, false); |
| |
| out: |
| mutex_unlock(&wl->mutex); |
| |
| } |
| |
| |
| static int wl1271_get_scan_channels(struct wl1271 *wl, |
| struct cfg80211_scan_request *req, |
| struct basic_scan_channel_params *channels, |
| enum ieee80211_band band, bool passive) |
| { |
| struct conf_scan_settings *c = &wl->conf.scan; |
| int i, j; |
| u32 flags; |
| |
| for (i = 0, j = 0; |
| i < req->n_channels && j < WL1271_SCAN_MAX_CHANNELS; |
| i++) { |
| flags = req->channels[i]->flags; |
| |
| if (!test_bit(i, wl->scan.scanned_ch) && |
| !(flags & IEEE80211_CHAN_DISABLED) && |
| (req->channels[i]->band == band) && |
| /* |
| * In passive scans, we scan all remaining |
| * channels, even if not marked as such. |
| * In active scans, we only scan channels not |
| * marked as passive. |
| */ |
| (passive || !(flags & IEEE80211_CHAN_PASSIVE_SCAN))) { |
| wl1271_debug(DEBUG_SCAN, "band %d, center_freq %d ", |
| req->channels[i]->band, |
| req->channels[i]->center_freq); |
| wl1271_debug(DEBUG_SCAN, "hw_value %d, flags %X", |
| req->channels[i]->hw_value, |
| req->channels[i]->flags); |
| wl1271_debug(DEBUG_SCAN, |
| "max_antenna_gain %d, max_power %d", |
| req->channels[i]->max_antenna_gain, |
| req->channels[i]->max_power); |
| wl1271_debug(DEBUG_SCAN, "beacon_found %d", |
| req->channels[i]->beacon_found); |
| |
| if (!passive) { |
| channels[j].min_duration = |
| cpu_to_le32(c->min_dwell_time_active); |
| channels[j].max_duration = |
| cpu_to_le32(c->max_dwell_time_active); |
| } else { |
| channels[j].min_duration = |
| cpu_to_le32(c->min_dwell_time_passive); |
| channels[j].max_duration = |
| cpu_to_le32(c->max_dwell_time_passive); |
| } |
| channels[j].early_termination = 0; |
| channels[j].tx_power_att = req->channels[i]->max_power; |
| channels[j].channel = req->channels[i]->hw_value; |
| |
| memset(&channels[j].bssid_lsb, 0xff, 4); |
| memset(&channels[j].bssid_msb, 0xff, 2); |
| |
| /* Mark the channels we already used */ |
| set_bit(i, wl->scan.scanned_ch); |
| |
| j++; |
| } |
| } |
| |
| return j; |
| } |
| |
| #define WL1271_NOTHING_TO_SCAN 1 |
| |
| static int wl1271_scan_send(struct wl1271 *wl, struct ieee80211_vif *vif, |
| enum ieee80211_band band, |
| bool passive, u32 basic_rate) |
| { |
| struct wl12xx_vif *wlvif = wl12xx_vif_to_data(vif); |
| struct wl1271_cmd_scan *cmd; |
| struct wl1271_cmd_trigger_scan_to *trigger; |
| int ret; |
| u16 scan_options = 0; |
| |
| /* skip active scans if we don't have SSIDs */ |
| if (!passive && wl->scan.req->n_ssids == 0) |
| return WL1271_NOTHING_TO_SCAN; |
| |
| cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); |
| trigger = kzalloc(sizeof(*trigger), GFP_KERNEL); |
| if (!cmd || !trigger) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| if (passive) |
| scan_options |= WL1271_SCAN_OPT_PASSIVE; |
| |
| if (WARN_ON(wlvif->role_id == WL12XX_INVALID_ROLE_ID)) { |
| ret = -EINVAL; |
| goto out; |
| } |
| cmd->params.role_id = wlvif->role_id; |
| cmd->params.scan_options = cpu_to_le16(scan_options); |
| |
| cmd->params.n_ch = wl1271_get_scan_channels(wl, wl->scan.req, |
| cmd->channels, |
| band, passive); |
| if (cmd->params.n_ch == 0) { |
| ret = WL1271_NOTHING_TO_SCAN; |
| goto out; |
| } |
| |
| cmd->params.tx_rate = cpu_to_le32(basic_rate); |
| cmd->params.n_probe_reqs = wl->conf.scan.num_probe_reqs; |
| cmd->params.tid_trigger = 0; |
| cmd->params.scan_tag = WL1271_SCAN_DEFAULT_TAG; |
| |
| if (band == IEEE80211_BAND_2GHZ) |
| cmd->params.band = WL1271_SCAN_BAND_2_4_GHZ; |
| else |
| cmd->params.band = WL1271_SCAN_BAND_5_GHZ; |
| |
| if (wl->scan.ssid_len && wl->scan.ssid) { |
| cmd->params.ssid_len = wl->scan.ssid_len; |
| memcpy(cmd->params.ssid, wl->scan.ssid, wl->scan.ssid_len); |
| } |
| |
| memcpy(cmd->addr, vif->addr, ETH_ALEN); |
| |
| ret = wl1271_cmd_build_probe_req(wl, wlvif, wl->scan.ssid, |
| wl->scan.ssid_len, wl->scan.req->ie, |
| wl->scan.req->ie_len, band); |
| if (ret < 0) { |
| wl1271_error("PROBE request template failed"); |
| goto out; |
| } |
| |
| /* disable the timeout */ |
| trigger->timeout = 0; |
| ret = wl1271_cmd_send(wl, CMD_TRIGGER_SCAN_TO, trigger, |
| sizeof(*trigger), 0); |
| if (ret < 0) { |
| wl1271_error("trigger scan to failed for hw scan"); |
| goto out; |
| } |
| |
| wl1271_dump(DEBUG_SCAN, "SCAN: ", cmd, sizeof(*cmd)); |
| |
| ret = wl1271_cmd_send(wl, CMD_SCAN, cmd, sizeof(*cmd), 0); |
| if (ret < 0) { |
| wl1271_error("SCAN failed"); |
| goto out; |
| } |
| |
| out: |
| kfree(cmd); |
| kfree(trigger); |
| return ret; |
| } |
| |
| void wl1271_scan_stm(struct wl1271 *wl, struct ieee80211_vif *vif) |
| { |
| struct wl12xx_vif *wlvif = wl12xx_vif_to_data(vif); |
| int ret = 0; |
| enum ieee80211_band band; |
| u32 rate, mask; |
| |
| switch (wl->scan.state) { |
| case WL1271_SCAN_STATE_IDLE: |
| break; |
| |
| case WL1271_SCAN_STATE_2GHZ_ACTIVE: |
| band = IEEE80211_BAND_2GHZ; |
| mask = wlvif->bitrate_masks[band]; |
| if (wl->scan.req->no_cck) { |
| mask &= ~CONF_TX_CCK_RATES; |
| if (!mask) |
| mask = CONF_TX_RATE_MASK_BASIC_P2P; |
| } |
| rate = wl1271_tx_min_rate_get(wl, mask); |
| ret = wl1271_scan_send(wl, vif, band, false, rate); |
| if (ret == WL1271_NOTHING_TO_SCAN) { |
| wl->scan.state = WL1271_SCAN_STATE_2GHZ_PASSIVE; |
| wl1271_scan_stm(wl, vif); |
| } |
| |
| break; |
| |
| case WL1271_SCAN_STATE_2GHZ_PASSIVE: |
| band = IEEE80211_BAND_2GHZ; |
| mask = wlvif->bitrate_masks[band]; |
| if (wl->scan.req->no_cck) { |
| mask &= ~CONF_TX_CCK_RATES; |
| if (!mask) |
| mask = CONF_TX_RATE_MASK_BASIC_P2P; |
| } |
| rate = wl1271_tx_min_rate_get(wl, mask); |
| ret = wl1271_scan_send(wl, vif, band, true, rate); |
| if (ret == WL1271_NOTHING_TO_SCAN) { |
| if (wl->enable_11a) |
| wl->scan.state = WL1271_SCAN_STATE_5GHZ_ACTIVE; |
| else |
| wl->scan.state = WL1271_SCAN_STATE_DONE; |
| wl1271_scan_stm(wl, vif); |
| } |
| |
| break; |
| |
| case WL1271_SCAN_STATE_5GHZ_ACTIVE: |
| band = IEEE80211_BAND_5GHZ; |
| rate = wl1271_tx_min_rate_get(wl, wlvif->bitrate_masks[band]); |
| ret = wl1271_scan_send(wl, vif, band, false, rate); |
| if (ret == WL1271_NOTHING_TO_SCAN) { |
| wl->scan.state = WL1271_SCAN_STATE_5GHZ_PASSIVE; |
| wl1271_scan_stm(wl, vif); |
| } |
| |
| break; |
| |
| case WL1271_SCAN_STATE_5GHZ_PASSIVE: |
| band = IEEE80211_BAND_5GHZ; |
| rate = wl1271_tx_min_rate_get(wl, wlvif->bitrate_masks[band]); |
| ret = wl1271_scan_send(wl, vif, band, true, rate); |
| if (ret == WL1271_NOTHING_TO_SCAN) { |
| wl->scan.state = WL1271_SCAN_STATE_DONE; |
| wl1271_scan_stm(wl, vif); |
| } |
| |
| break; |
| |
| case WL1271_SCAN_STATE_DONE: |
| wl->scan.failed = false; |
| cancel_delayed_work(&wl->scan_complete_work); |
| ieee80211_queue_delayed_work(wl->hw, &wl->scan_complete_work, |
| msecs_to_jiffies(0)); |
| break; |
| |
| default: |
| wl1271_error("invalid scan state"); |
| break; |
| } |
| |
| if (ret < 0) { |
| cancel_delayed_work(&wl->scan_complete_work); |
| ieee80211_queue_delayed_work(wl->hw, &wl->scan_complete_work, |
| msecs_to_jiffies(0)); |
| } |
| } |
| |
| int wl1271_scan(struct wl1271 *wl, struct ieee80211_vif *vif, |
| const u8 *ssid, size_t ssid_len, |
| struct cfg80211_scan_request *req) |
| { |
| /* |
| * cfg80211 should guarantee that we don't get more channels |
| * than what we have registered. |
| */ |
| BUG_ON(req->n_channels > WL1271_MAX_CHANNELS); |
| |
| if (wl->scan.state != WL1271_SCAN_STATE_IDLE) |
| return -EBUSY; |
| |
| wl->scan.state = WL1271_SCAN_STATE_2GHZ_ACTIVE; |
| |
| if (ssid_len && ssid) { |
| wl->scan.ssid_len = ssid_len; |
| memcpy(wl->scan.ssid, ssid, ssid_len); |
| } else { |
| wl->scan.ssid_len = 0; |
| } |
| |
| wl->scan_vif = vif; |
| wl->scan.req = req; |
| memset(wl->scan.scanned_ch, 0, sizeof(wl->scan.scanned_ch)); |
| |
| /* we assume failure so that timeout scenarios are handled correctly */ |
| wl->scan.failed = true; |
| ieee80211_queue_delayed_work(wl->hw, &wl->scan_complete_work, |
| msecs_to_jiffies(WL1271_SCAN_TIMEOUT)); |
| |
| wl1271_scan_stm(wl, vif); |
| |
| return 0; |
| } |
| |
| int wl1271_scan_stop(struct wl1271 *wl) |
| { |
| struct wl1271_cmd_header *cmd = NULL; |
| int ret = 0; |
| |
| if (WARN_ON(wl->scan.state == WL1271_SCAN_STATE_IDLE)) |
| return -EINVAL; |
| |
| wl1271_debug(DEBUG_CMD, "cmd scan stop"); |
| |
| cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); |
| if (!cmd) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| ret = wl1271_cmd_send(wl, CMD_STOP_SCAN, cmd, |
| sizeof(*cmd), 0); |
| if (ret < 0) { |
| wl1271_error("cmd stop_scan failed"); |
| goto out; |
| } |
| out: |
| kfree(cmd); |
| return ret; |
| } |
| |
| static int |
| wl1271_scan_get_sched_scan_channels(struct wl1271 *wl, |
| struct cfg80211_sched_scan_request *req, |
| struct conn_scan_ch_params *channels, |
| u32 band, bool radar, bool passive, |
| int start, int max_channels) |
| { |
| struct conf_sched_scan_settings *c = &wl->conf.sched_scan; |
| int i, j; |
| u32 flags; |
| bool force_passive = !req->n_ssids; |
| |
| for (i = 0, j = start; |
| i < req->n_channels && j < max_channels; |
| i++) { |
| flags = req->channels[i]->flags; |
| |
| if (force_passive) |
| flags |= IEEE80211_CHAN_PASSIVE_SCAN; |
| |
| if ((req->channels[i]->band == band) && |
| !(flags & IEEE80211_CHAN_DISABLED) && |
| (!!(flags & IEEE80211_CHAN_RADAR) == radar) && |
| /* if radar is set, we ignore the passive flag */ |
| (radar || |
| !!(flags & IEEE80211_CHAN_PASSIVE_SCAN) == passive)) { |
| wl1271_debug(DEBUG_SCAN, "band %d, center_freq %d ", |
| req->channels[i]->band, |
| req->channels[i]->center_freq); |
| wl1271_debug(DEBUG_SCAN, "hw_value %d, flags %X", |
| req->channels[i]->hw_value, |
| req->channels[i]->flags); |
| wl1271_debug(DEBUG_SCAN, "max_power %d", |
| req->channels[i]->max_power); |
| |
| if (flags & IEEE80211_CHAN_RADAR) { |
| channels[j].flags |= SCAN_CHANNEL_FLAGS_DFS; |
| channels[j].passive_duration = |
| cpu_to_le16(c->dwell_time_dfs); |
| } |
| else if (flags & IEEE80211_CHAN_PASSIVE_SCAN) { |
| channels[j].passive_duration = |
| cpu_to_le16(c->dwell_time_passive); |
| } else { |
| channels[j].min_duration = |
| cpu_to_le16(c->min_dwell_time_active); |
| channels[j].max_duration = |
| cpu_to_le16(c->max_dwell_time_active); |
| } |
| channels[j].tx_power_att = req->channels[i]->max_power; |
| channels[j].channel = req->channels[i]->hw_value; |
| |
| j++; |
| } |
| } |
| |
| return j - start; |
| } |
| |
| static bool |
| wl1271_scan_sched_scan_channels(struct wl1271 *wl, |
| struct cfg80211_sched_scan_request *req, |
| struct wl1271_cmd_sched_scan_config *cfg) |
| { |
| cfg->passive[0] = |
| wl1271_scan_get_sched_scan_channels(wl, req, cfg->channels_2, |
| IEEE80211_BAND_2GHZ, |
| false, true, 0, |
| MAX_CHANNELS_2GHZ); |
| cfg->active[0] = |
| wl1271_scan_get_sched_scan_channels(wl, req, cfg->channels_2, |
| IEEE80211_BAND_2GHZ, |
| false, false, |
| cfg->passive[0], |
| MAX_CHANNELS_2GHZ); |
| cfg->passive[1] = |
| wl1271_scan_get_sched_scan_channels(wl, req, cfg->channels_5, |
| IEEE80211_BAND_5GHZ, |
| false, true, 0, |
| MAX_CHANNELS_5GHZ); |
| cfg->dfs = |
| wl1271_scan_get_sched_scan_channels(wl, req, cfg->channels_5, |
| IEEE80211_BAND_5GHZ, |
| true, true, |
| cfg->passive[1], |
| MAX_CHANNELS_5GHZ); |
| cfg->active[1] = |
| wl1271_scan_get_sched_scan_channels(wl, req, cfg->channels_5, |
| IEEE80211_BAND_5GHZ, |
| false, false, |
| cfg->passive[1] + cfg->dfs, |
| MAX_CHANNELS_5GHZ); |
| /* 802.11j channels are not supported yet */ |
| cfg->passive[2] = 0; |
| cfg->active[2] = 0; |
| |
| wl1271_debug(DEBUG_SCAN, " 2.4GHz: active %d passive %d", |
| cfg->active[0], cfg->passive[0]); |
| wl1271_debug(DEBUG_SCAN, " 5GHz: active %d passive %d", |
| cfg->active[1], cfg->passive[1]); |
| wl1271_debug(DEBUG_SCAN, " DFS: %d", cfg->dfs); |
| |
| return cfg->passive[0] || cfg->active[0] || |
| cfg->passive[1] || cfg->active[1] || cfg->dfs || |
| cfg->passive[2] || cfg->active[2]; |
| } |
| |
| /* Returns the scan type to be used or a negative value on error */ |
| static int |
| wl12xx_scan_sched_scan_ssid_list(struct wl1271 *wl, |
| struct cfg80211_sched_scan_request *req) |
| { |
| struct wl1271_cmd_sched_scan_ssid_list *cmd = NULL; |
| struct cfg80211_match_set *sets = req->match_sets; |
| struct cfg80211_ssid *ssids = req->ssids; |
| int ret = 0, type, i, j, n_match_ssids = 0; |
| |
| wl1271_debug(DEBUG_CMD, "cmd sched scan ssid list"); |
| |
| /* count the match sets that contain SSIDs */ |
| for (i = 0; i < req->n_match_sets; i++) |
| if (sets[i].ssid.ssid_len > 0) |
| n_match_ssids++; |
| |
| /* No filter, no ssids or only bcast ssid */ |
| if (!n_match_ssids && |
| (!req->n_ssids || |
| (req->n_ssids == 1 && req->ssids[0].ssid_len == 0))) { |
| type = SCAN_SSID_FILTER_ANY; |
| goto out; |
| } |
| |
| cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); |
| if (!cmd) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| if (!n_match_ssids) { |
| /* No filter, with ssids */ |
| type = SCAN_SSID_FILTER_DISABLED; |
| |
| for (i = 0; i < req->n_ssids; i++) { |
| cmd->ssids[cmd->n_ssids].type = (ssids[i].ssid_len) ? |
| SCAN_SSID_TYPE_HIDDEN : SCAN_SSID_TYPE_PUBLIC; |
| cmd->ssids[cmd->n_ssids].len = ssids[i].ssid_len; |
| memcpy(cmd->ssids[cmd->n_ssids].ssid, ssids[i].ssid, |
| ssids[i].ssid_len); |
| cmd->n_ssids++; |
| } |
| } else { |
| type = SCAN_SSID_FILTER_LIST; |
| |
| /* Add all SSIDs from the filters */ |
| for (i = 0; i < req->n_match_sets; i++) { |
| /* ignore sets without SSIDs */ |
| if (!sets[i].ssid.ssid_len) |
| continue; |
| |
| cmd->ssids[cmd->n_ssids].type = SCAN_SSID_TYPE_PUBLIC; |
| cmd->ssids[cmd->n_ssids].len = sets[i].ssid.ssid_len; |
| memcpy(cmd->ssids[cmd->n_ssids].ssid, |
| sets[i].ssid.ssid, sets[i].ssid.ssid_len); |
| cmd->n_ssids++; |
| } |
| if ((req->n_ssids > 1) || |
| (req->n_ssids == 1 && req->ssids[0].ssid_len > 0)) { |
| /* |
| * Mark all the SSIDs passed in the SSID list as HIDDEN, |
| * so they're used in probe requests. |
| */ |
| for (i = 0; i < req->n_ssids; i++) { |
| if (!req->ssids[i].ssid_len) |
| continue; |
| |
| for (j = 0; j < cmd->n_ssids; j++) |
| if (!memcmp(req->ssids[i].ssid, |
| cmd->ssids[j].ssid, |
| req->ssids[i].ssid_len)) { |
| cmd->ssids[j].type = |
| SCAN_SSID_TYPE_HIDDEN; |
| break; |
| } |
| /* Fail if SSID isn't present in the filters */ |
| if (j == cmd->n_ssids) { |
| ret = -EINVAL; |
| goto out_free; |
| } |
| } |
| } |
| } |
| |
| wl1271_dump(DEBUG_SCAN, "SSID_LIST: ", cmd, sizeof(*cmd)); |
| |
| ret = wl1271_cmd_send(wl, CMD_CONNECTION_SCAN_SSID_CFG, cmd, |
| sizeof(*cmd), 0); |
| if (ret < 0) { |
| wl1271_error("cmd sched scan ssid list failed"); |
| goto out_free; |
| } |
| |
| out_free: |
| kfree(cmd); |
| out: |
| if (ret < 0) |
| return ret; |
| return type; |
| } |
| |
| int wl1271_scan_sched_scan_config(struct wl1271 *wl, |
| struct wl12xx_vif *wlvif, |
| struct cfg80211_sched_scan_request *req, |
| struct ieee80211_sched_scan_ies *ies) |
| { |
| struct wl1271_cmd_sched_scan_config *cfg = NULL; |
| struct conf_sched_scan_settings *c = &wl->conf.sched_scan; |
| int i, ret; |
| bool force_passive = !req->n_ssids; |
| |
| wl1271_debug(DEBUG_CMD, "cmd sched_scan scan config"); |
| |
| cfg = kzalloc(sizeof(*cfg), GFP_KERNEL); |
| if (!cfg) |
| return -ENOMEM; |
| |
| cfg->rssi_threshold = c->rssi_threshold; |
| cfg->snr_threshold = c->snr_threshold; |
| cfg->n_probe_reqs = c->num_probe_reqs; |
| /* cycles set to 0 it means infinite (until manually stopped) */ |
| cfg->cycles = 0; |
| /* report APs when at least 1 is found */ |
| cfg->report_after = 1; |
| /* don't stop scanning automatically when something is found */ |
| cfg->terminate = 0; |
| cfg->tag = WL1271_SCAN_DEFAULT_TAG; |
| /* don't filter on BSS type */ |
| cfg->bss_type = SCAN_BSS_TYPE_ANY; |
| /* currently NL80211 supports only a single interval */ |
| for (i = 0; i < SCAN_MAX_CYCLE_INTERVALS; i++) |
| cfg->intervals[i] = cpu_to_le32(req->interval); |
| |
| cfg->ssid_len = 0; |
| ret = wl12xx_scan_sched_scan_ssid_list(wl, req); |
| if (ret < 0) |
| goto out; |
| |
| cfg->filter_type = ret; |
| |
| wl1271_debug(DEBUG_SCAN, "filter_type = %d", cfg->filter_type); |
| |
| if (!wl1271_scan_sched_scan_channels(wl, req, cfg)) { |
| wl1271_error("scan channel list is empty"); |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| if (!force_passive && cfg->active[0]) { |
| ret = wl1271_cmd_build_probe_req(wl, wlvif, req->ssids[0].ssid, |
| req->ssids[0].ssid_len, |
| ies->ie[IEEE80211_BAND_2GHZ], |
| ies->len[IEEE80211_BAND_2GHZ], |
| IEEE80211_BAND_2GHZ); |
| if (ret < 0) { |
| wl1271_error("2.4GHz PROBE request template failed"); |
| goto out; |
| } |
| } |
| |
| if (!force_passive && cfg->active[1]) { |
| ret = wl1271_cmd_build_probe_req(wl, wlvif, req->ssids[0].ssid, |
| req->ssids[0].ssid_len, |
| ies->ie[IEEE80211_BAND_5GHZ], |
| ies->len[IEEE80211_BAND_5GHZ], |
| IEEE80211_BAND_5GHZ); |
| if (ret < 0) { |
| wl1271_error("5GHz PROBE request template failed"); |
| goto out; |
| } |
| } |
| |
| wl1271_dump(DEBUG_SCAN, "SCAN_CFG: ", cfg, sizeof(*cfg)); |
| |
| ret = wl1271_cmd_send(wl, CMD_CONNECTION_SCAN_CFG, cfg, |
| sizeof(*cfg), 0); |
| if (ret < 0) { |
| wl1271_error("SCAN configuration failed"); |
| goto out; |
| } |
| out: |
| kfree(cfg); |
| return ret; |
| } |
| |
| int wl1271_scan_sched_scan_start(struct wl1271 *wl, struct wl12xx_vif *wlvif) |
| { |
| struct wl1271_cmd_sched_scan_start *start; |
| int ret = 0; |
| |
| wl1271_debug(DEBUG_CMD, "cmd periodic scan start"); |
| |
| if (wlvif->bss_type != BSS_TYPE_STA_BSS) |
| return -EOPNOTSUPP; |
| |
| if (!test_bit(WL1271_FLAG_IDLE, &wl->flags)) |
| return -EBUSY; |
| |
| start = kzalloc(sizeof(*start), GFP_KERNEL); |
| if (!start) |
| return -ENOMEM; |
| |
| start->tag = WL1271_SCAN_DEFAULT_TAG; |
| |
| ret = wl1271_cmd_send(wl, CMD_START_PERIODIC_SCAN, start, |
| sizeof(*start), 0); |
| if (ret < 0) { |
| wl1271_error("failed to send scan start command"); |
| goto out_free; |
| } |
| |
| out_free: |
| kfree(start); |
| return ret; |
| } |
| |
| void wl1271_scan_sched_scan_results(struct wl1271 *wl) |
| { |
| wl1271_debug(DEBUG_SCAN, "got periodic scan results"); |
| |
| ieee80211_sched_scan_results(wl->hw); |
| } |
| |
| void wl1271_scan_sched_scan_stop(struct wl1271 *wl) |
| { |
| struct wl1271_cmd_sched_scan_stop *stop; |
| int ret = 0; |
| |
| wl1271_debug(DEBUG_CMD, "cmd periodic scan stop"); |
| |
| /* FIXME: what to do if alloc'ing to stop fails? */ |
| stop = kzalloc(sizeof(*stop), GFP_KERNEL); |
| if (!stop) { |
| wl1271_error("failed to alloc memory to send sched scan stop"); |
| return; |
| } |
| |
| stop->tag = WL1271_SCAN_DEFAULT_TAG; |
| |
| ret = wl1271_cmd_send(wl, CMD_STOP_PERIODIC_SCAN, stop, |
| sizeof(*stop), 0); |
| if (ret < 0) { |
| wl1271_error("failed to send sched scan stop command"); |
| goto out_free; |
| } |
| wl->sched_scanning = false; |
| |
| out_free: |
| kfree(stop); |
| } |