| /**************************************************************************** |
| * Driver for Solarflare Solarstorm network controllers and boards |
| * Copyright 2006-2008 Solarflare Communications Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 as published |
| * by the Free Software Foundation, incorporated herein by reference. |
| */ |
| /* |
| * Useful functions for working with MDIO clause 45 PHYs |
| */ |
| #include <linux/types.h> |
| #include <linux/ethtool.h> |
| #include <linux/delay.h> |
| #include "net_driver.h" |
| #include "mdio_10g.h" |
| #include "boards.h" |
| #include "workarounds.h" |
| |
| int mdio_clause45_reset_mmd(struct efx_nic *port, int mmd, |
| int spins, int spintime) |
| { |
| u32 ctrl; |
| int phy_id = port->mii.phy_id; |
| |
| /* Catch callers passing values in the wrong units (or just silly) */ |
| EFX_BUG_ON_PARANOID(spins * spintime >= 5000); |
| |
| mdio_clause45_write(port, phy_id, mmd, MDIO_MMDREG_CTRL1, |
| (1 << MDIO_MMDREG_CTRL1_RESET_LBN)); |
| /* Wait for the reset bit to clear. */ |
| do { |
| msleep(spintime); |
| ctrl = mdio_clause45_read(port, phy_id, mmd, MDIO_MMDREG_CTRL1); |
| spins--; |
| |
| } while (spins && (ctrl & (1 << MDIO_MMDREG_CTRL1_RESET_LBN))); |
| |
| return spins ? spins : -ETIMEDOUT; |
| } |
| |
| static int mdio_clause45_check_mmd(struct efx_nic *efx, int mmd, |
| int fault_fatal) |
| { |
| int status; |
| int phy_id = efx->mii.phy_id; |
| |
| if (LOOPBACK_INTERNAL(efx)) |
| return 0; |
| |
| if (mmd != MDIO_MMD_AN) { |
| /* Read MMD STATUS2 to check it is responding. */ |
| status = mdio_clause45_read(efx, phy_id, mmd, |
| MDIO_MMDREG_STAT2); |
| if (((status >> MDIO_MMDREG_STAT2_PRESENT_LBN) & |
| ((1 << MDIO_MMDREG_STAT2_PRESENT_WIDTH) - 1)) != |
| MDIO_MMDREG_STAT2_PRESENT_VAL) { |
| EFX_ERR(efx, "PHY MMD %d not responding.\n", mmd); |
| return -EIO; |
| } |
| } |
| |
| /* Read MMD STATUS 1 to check for fault. */ |
| status = mdio_clause45_read(efx, phy_id, mmd, MDIO_MMDREG_STAT1); |
| if ((status & (1 << MDIO_MMDREG_STAT1_FAULT_LBN)) != 0) { |
| if (fault_fatal) { |
| EFX_ERR(efx, "PHY MMD %d reporting fatal" |
| " fault: status %x\n", mmd, status); |
| return -EIO; |
| } else { |
| EFX_LOG(efx, "PHY MMD %d reporting status" |
| " %x (expected)\n", mmd, status); |
| } |
| } |
| return 0; |
| } |
| |
| /* This ought to be ridiculous overkill. We expect it to fail rarely */ |
| #define MDIO45_RESET_TIME 1000 /* ms */ |
| #define MDIO45_RESET_ITERS 100 |
| |
| int mdio_clause45_wait_reset_mmds(struct efx_nic *efx, |
| unsigned int mmd_mask) |
| { |
| const int spintime = MDIO45_RESET_TIME / MDIO45_RESET_ITERS; |
| int tries = MDIO45_RESET_ITERS; |
| int rc = 0; |
| int in_reset; |
| |
| while (tries) { |
| int mask = mmd_mask; |
| int mmd = 0; |
| int stat; |
| in_reset = 0; |
| while (mask) { |
| if (mask & 1) { |
| stat = mdio_clause45_read(efx, |
| efx->mii.phy_id, |
| mmd, |
| MDIO_MMDREG_CTRL1); |
| if (stat < 0) { |
| EFX_ERR(efx, "failed to read status of" |
| " MMD %d\n", mmd); |
| return -EIO; |
| } |
| if (stat & (1 << MDIO_MMDREG_CTRL1_RESET_LBN)) |
| in_reset |= (1 << mmd); |
| } |
| mask = mask >> 1; |
| mmd++; |
| } |
| if (!in_reset) |
| break; |
| tries--; |
| msleep(spintime); |
| } |
| if (in_reset != 0) { |
| EFX_ERR(efx, "not all MMDs came out of reset in time." |
| " MMDs still in reset: %x\n", in_reset); |
| rc = -ETIMEDOUT; |
| } |
| return rc; |
| } |
| |
| int mdio_clause45_check_mmds(struct efx_nic *efx, |
| unsigned int mmd_mask, unsigned int fatal_mask) |
| { |
| u32 devices; |
| int mmd = 0, probe_mmd; |
| |
| /* Historically we have probed the PHYXS to find out what devices are |
| * present,but that doesn't work so well if the PHYXS isn't expected |
| * to exist, if so just find the first item in the list supplied. */ |
| probe_mmd = (mmd_mask & MDIO_MMDREG_DEVS_PHYXS) ? MDIO_MMD_PHYXS : |
| __ffs(mmd_mask); |
| devices = (mdio_clause45_read(efx, efx->mii.phy_id, |
| probe_mmd, MDIO_MMDREG_DEVS0) | |
| mdio_clause45_read(efx, efx->mii.phy_id, |
| probe_mmd, MDIO_MMDREG_DEVS1) << 16); |
| |
| /* Check all the expected MMDs are present */ |
| if (devices < 0) { |
| EFX_ERR(efx, "failed to read devices present\n"); |
| return -EIO; |
| } |
| if ((devices & mmd_mask) != mmd_mask) { |
| EFX_ERR(efx, "required MMDs not present: got %x, " |
| "wanted %x\n", devices, mmd_mask); |
| return -ENODEV; |
| } |
| EFX_TRACE(efx, "Devices present: %x\n", devices); |
| |
| /* Check all required MMDs are responding and happy. */ |
| while (mmd_mask) { |
| if (mmd_mask & 1) { |
| int fault_fatal = fatal_mask & 1; |
| if (mdio_clause45_check_mmd(efx, mmd, fault_fatal)) |
| return -EIO; |
| } |
| mmd_mask = mmd_mask >> 1; |
| fatal_mask = fatal_mask >> 1; |
| mmd++; |
| } |
| |
| return 0; |
| } |
| |
| bool mdio_clause45_links_ok(struct efx_nic *efx, unsigned int mmd_mask) |
| { |
| int phy_id = efx->mii.phy_id; |
| u32 reg; |
| bool ok = true; |
| int mmd = 0; |
| |
| /* If the port is in loopback, then we should only consider a subset |
| * of mmd's */ |
| if (LOOPBACK_INTERNAL(efx)) |
| return true; |
| else if (efx->loopback_mode == LOOPBACK_NETWORK) |
| return false; |
| else if (efx_phy_mode_disabled(efx->phy_mode)) |
| return false; |
| else if (efx->loopback_mode == LOOPBACK_PHYXS) { |
| mmd_mask &= ~(MDIO_MMDREG_DEVS_PHYXS | |
| MDIO_MMDREG_DEVS_PCS | |
| MDIO_MMDREG_DEVS_PMAPMD | |
| MDIO_MMDREG_DEVS_AN); |
| if (!mmd_mask) { |
| reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PHYXS, |
| MDIO_PHYXS_STATUS2); |
| return !(reg & (1 << MDIO_PHYXS_STATUS2_RX_FAULT_LBN)); |
| } |
| } else if (efx->loopback_mode == LOOPBACK_PCS) |
| mmd_mask &= ~(MDIO_MMDREG_DEVS_PCS | |
| MDIO_MMDREG_DEVS_PMAPMD | |
| MDIO_MMDREG_DEVS_AN); |
| else if (efx->loopback_mode == LOOPBACK_PMAPMD) |
| mmd_mask &= ~(MDIO_MMDREG_DEVS_PMAPMD | |
| MDIO_MMDREG_DEVS_AN); |
| |
| while (mmd_mask) { |
| if (mmd_mask & 1) { |
| /* Double reads because link state is latched, and a |
| * read moves the current state into the register */ |
| reg = mdio_clause45_read(efx, phy_id, |
| mmd, MDIO_MMDREG_STAT1); |
| reg = mdio_clause45_read(efx, phy_id, |
| mmd, MDIO_MMDREG_STAT1); |
| ok = ok && (reg & (1 << MDIO_MMDREG_STAT1_LINK_LBN)); |
| } |
| mmd_mask = (mmd_mask >> 1); |
| mmd++; |
| } |
| return ok; |
| } |
| |
| void mdio_clause45_transmit_disable(struct efx_nic *efx) |
| { |
| mdio_clause45_set_flag(efx, efx->mii.phy_id, MDIO_MMD_PMAPMD, |
| MDIO_MMDREG_TXDIS, MDIO_MMDREG_TXDIS_GLOBAL_LBN, |
| efx->phy_mode & PHY_MODE_TX_DISABLED); |
| } |
| |
| void mdio_clause45_phy_reconfigure(struct efx_nic *efx) |
| { |
| int phy_id = efx->mii.phy_id; |
| |
| mdio_clause45_set_flag(efx, phy_id, MDIO_MMD_PMAPMD, |
| MDIO_MMDREG_CTRL1, MDIO_PMAPMD_CTRL1_LBACK_LBN, |
| efx->loopback_mode == LOOPBACK_PMAPMD); |
| mdio_clause45_set_flag(efx, phy_id, MDIO_MMD_PCS, |
| MDIO_MMDREG_CTRL1, MDIO_MMDREG_CTRL1_LBACK_LBN, |
| efx->loopback_mode == LOOPBACK_PCS); |
| mdio_clause45_set_flag(efx, phy_id, MDIO_MMD_PHYXS, |
| MDIO_MMDREG_CTRL1, MDIO_MMDREG_CTRL1_LBACK_LBN, |
| efx->loopback_mode == LOOPBACK_NETWORK); |
| } |
| |
| static void mdio_clause45_set_mmd_lpower(struct efx_nic *efx, |
| int lpower, int mmd) |
| { |
| int phy = efx->mii.phy_id; |
| int stat = mdio_clause45_read(efx, phy, mmd, MDIO_MMDREG_STAT1); |
| |
| EFX_TRACE(efx, "Setting low power mode for MMD %d to %d\n", |
| mmd, lpower); |
| |
| if (stat & (1 << MDIO_MMDREG_STAT1_LPABLE_LBN)) { |
| mdio_clause45_set_flag(efx, phy, mmd, MDIO_MMDREG_CTRL1, |
| MDIO_MMDREG_CTRL1_LPOWER_LBN, lpower); |
| } |
| } |
| |
| void mdio_clause45_set_mmds_lpower(struct efx_nic *efx, |
| int low_power, unsigned int mmd_mask) |
| { |
| int mmd = 0; |
| mmd_mask &= ~MDIO_MMDREG_DEVS_AN; |
| while (mmd_mask) { |
| if (mmd_mask & 1) |
| mdio_clause45_set_mmd_lpower(efx, low_power, mmd); |
| mmd_mask = (mmd_mask >> 1); |
| mmd++; |
| } |
| } |
| |
| static u32 mdio_clause45_get_an(struct efx_nic *efx, u16 addr, u32 xnp) |
| { |
| int phy_id = efx->mii.phy_id; |
| u32 result = 0; |
| int reg; |
| |
| reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_AN, addr); |
| if (reg & ADVERTISE_10HALF) |
| result |= ADVERTISED_10baseT_Half; |
| if (reg & ADVERTISE_10FULL) |
| result |= ADVERTISED_10baseT_Full; |
| if (reg & ADVERTISE_100HALF) |
| result |= ADVERTISED_100baseT_Half; |
| if (reg & ADVERTISE_100FULL) |
| result |= ADVERTISED_100baseT_Full; |
| if (reg & LPA_RESV) |
| result |= xnp; |
| |
| return result; |
| } |
| |
| /** |
| * mdio_clause45_get_settings - Read (some of) the PHY settings over MDIO. |
| * @efx: Efx NIC |
| * @ecmd: Buffer for settings |
| * |
| * On return the 'port', 'speed', 'supported' and 'advertising' fields of |
| * ecmd have been filled out. |
| */ |
| void mdio_clause45_get_settings(struct efx_nic *efx, |
| struct ethtool_cmd *ecmd) |
| { |
| mdio_clause45_get_settings_ext(efx, ecmd, 0, 0); |
| } |
| |
| /** |
| * mdio_clause45_get_settings_ext - Read (some of) the PHY settings over MDIO. |
| * @efx: Efx NIC |
| * @ecmd: Buffer for settings |
| * @xnp: Advertised Extended Next Page state |
| * @xnp_lpa: Link Partner's advertised XNP state |
| * |
| * On return the 'port', 'speed', 'supported' and 'advertising' fields of |
| * ecmd have been filled out. |
| */ |
| void mdio_clause45_get_settings_ext(struct efx_nic *efx, |
| struct ethtool_cmd *ecmd, |
| u32 xnp, u32 xnp_lpa) |
| { |
| int phy_id = efx->mii.phy_id; |
| int reg; |
| |
| ecmd->transceiver = XCVR_INTERNAL; |
| ecmd->phy_address = phy_id; |
| |
| reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PMAPMD, |
| MDIO_MMDREG_CTRL2); |
| switch (reg & MDIO_PMAPMD_CTRL2_TYPE_MASK) { |
| case MDIO_PMAPMD_CTRL2_10G_BT: |
| case MDIO_PMAPMD_CTRL2_1G_BT: |
| case MDIO_PMAPMD_CTRL2_100_BT: |
| case MDIO_PMAPMD_CTRL2_10_BT: |
| ecmd->port = PORT_TP; |
| ecmd->supported = SUPPORTED_TP; |
| reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PMAPMD, |
| MDIO_MMDREG_SPEED); |
| if (reg & (1 << MDIO_MMDREG_SPEED_10G_LBN)) |
| ecmd->supported |= SUPPORTED_10000baseT_Full; |
| if (reg & (1 << MDIO_MMDREG_SPEED_1000M_LBN)) |
| ecmd->supported |= (SUPPORTED_1000baseT_Full | |
| SUPPORTED_1000baseT_Half); |
| if (reg & (1 << MDIO_MMDREG_SPEED_100M_LBN)) |
| ecmd->supported |= (SUPPORTED_100baseT_Full | |
| SUPPORTED_100baseT_Half); |
| if (reg & (1 << MDIO_MMDREG_SPEED_10M_LBN)) |
| ecmd->supported |= (SUPPORTED_10baseT_Full | |
| SUPPORTED_10baseT_Half); |
| ecmd->advertising = ADVERTISED_TP; |
| break; |
| |
| /* We represent CX4 as fibre in the absence of anything better */ |
| case MDIO_PMAPMD_CTRL2_10G_CX4: |
| /* All the other defined modes are flavours of optical */ |
| default: |
| ecmd->port = PORT_FIBRE; |
| ecmd->supported = SUPPORTED_FIBRE; |
| ecmd->advertising = ADVERTISED_FIBRE; |
| break; |
| } |
| |
| if (efx->phy_op->mmds & DEV_PRESENT_BIT(MDIO_MMD_AN)) { |
| ecmd->supported |= SUPPORTED_Autoneg; |
| reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_AN, |
| MDIO_MMDREG_CTRL1); |
| if (reg & BMCR_ANENABLE) { |
| ecmd->autoneg = AUTONEG_ENABLE; |
| ecmd->advertising |= |
| ADVERTISED_Autoneg | |
| mdio_clause45_get_an(efx, |
| MDIO_AN_ADVERTISE, xnp); |
| } else |
| ecmd->autoneg = AUTONEG_DISABLE; |
| } else |
| ecmd->autoneg = AUTONEG_DISABLE; |
| |
| if (ecmd->autoneg) { |
| /* If AN is complete, report best common mode, |
| * otherwise report best advertised mode. */ |
| u32 common = ecmd->advertising; |
| if (mdio_clause45_read(efx, phy_id, MDIO_MMD_AN, |
| MDIO_MMDREG_STAT1) & |
| (1 << MDIO_AN_STATUS_AN_DONE_LBN)) { |
| common &= mdio_clause45_get_an(efx, MDIO_AN_LPA, |
| xnp_lpa); |
| } |
| if (common & ADVERTISED_10000baseT_Full) { |
| ecmd->speed = SPEED_10000; |
| ecmd->duplex = DUPLEX_FULL; |
| } else if (common & (ADVERTISED_1000baseT_Full | |
| ADVERTISED_1000baseT_Half)) { |
| ecmd->speed = SPEED_1000; |
| ecmd->duplex = !!(common & ADVERTISED_1000baseT_Full); |
| } else if (common & (ADVERTISED_100baseT_Full | |
| ADVERTISED_100baseT_Half)) { |
| ecmd->speed = SPEED_100; |
| ecmd->duplex = !!(common & ADVERTISED_100baseT_Full); |
| } else { |
| ecmd->speed = SPEED_10; |
| ecmd->duplex = !!(common & ADVERTISED_10baseT_Full); |
| } |
| } else { |
| /* Report forced settings */ |
| reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PMAPMD, |
| MDIO_MMDREG_CTRL1); |
| ecmd->speed = (((reg & BMCR_SPEED1000) ? 100 : 1) * |
| ((reg & BMCR_SPEED100) ? 100 : 10)); |
| ecmd->duplex = (reg & BMCR_FULLDPLX || |
| ecmd->speed == SPEED_10000); |
| } |
| } |
| |
| /** |
| * mdio_clause45_set_settings - Set (some of) the PHY settings over MDIO. |
| * @efx: Efx NIC |
| * @ecmd: New settings |
| */ |
| int mdio_clause45_set_settings(struct efx_nic *efx, |
| struct ethtool_cmd *ecmd) |
| { |
| int phy_id = efx->mii.phy_id; |
| struct ethtool_cmd prev; |
| u32 required; |
| int ctrl1_bits, reg; |
| |
| efx->phy_op->get_settings(efx, &prev); |
| |
| if (ecmd->advertising == prev.advertising && |
| ecmd->speed == prev.speed && |
| ecmd->duplex == prev.duplex && |
| ecmd->port == prev.port && |
| ecmd->autoneg == prev.autoneg) |
| return 0; |
| |
| /* We can only change these settings for -T PHYs */ |
| if (prev.port != PORT_TP || ecmd->port != PORT_TP) |
| return -EINVAL; |
| |
| /* Check that PHY supports these settings and work out the |
| * basic control bits */ |
| if (ecmd->duplex) { |
| switch (ecmd->speed) { |
| case SPEED_10: |
| ctrl1_bits = BMCR_FULLDPLX; |
| required = SUPPORTED_10baseT_Full; |
| break; |
| case SPEED_100: |
| ctrl1_bits = BMCR_SPEED100 | BMCR_FULLDPLX; |
| required = SUPPORTED_100baseT_Full; |
| break; |
| case SPEED_1000: |
| ctrl1_bits = BMCR_SPEED1000 | BMCR_FULLDPLX; |
| required = SUPPORTED_1000baseT_Full; |
| break; |
| case SPEED_10000: |
| ctrl1_bits = (BMCR_SPEED1000 | BMCR_SPEED100 | |
| BMCR_FULLDPLX); |
| required = SUPPORTED_10000baseT_Full; |
| break; |
| default: |
| return -EINVAL; |
| } |
| } else { |
| switch (ecmd->speed) { |
| case SPEED_10: |
| ctrl1_bits = 0; |
| required = SUPPORTED_10baseT_Half; |
| break; |
| case SPEED_100: |
| ctrl1_bits = BMCR_SPEED100; |
| required = SUPPORTED_100baseT_Half; |
| break; |
| case SPEED_1000: |
| ctrl1_bits = BMCR_SPEED1000; |
| required = SUPPORTED_1000baseT_Half; |
| break; |
| default: |
| return -EINVAL; |
| } |
| } |
| if (ecmd->autoneg) |
| required |= SUPPORTED_Autoneg; |
| required |= ecmd->advertising; |
| if (required & ~prev.supported) |
| return -EINVAL; |
| |
| /* Set the basic control bits */ |
| reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PMAPMD, |
| MDIO_MMDREG_CTRL1); |
| reg &= ~(BMCR_SPEED1000 | BMCR_SPEED100 | BMCR_FULLDPLX | 0x003c); |
| reg |= ctrl1_bits; |
| mdio_clause45_write(efx, phy_id, MDIO_MMD_PMAPMD, MDIO_MMDREG_CTRL1, |
| reg); |
| |
| /* Set the AN registers */ |
| if (ecmd->autoneg != prev.autoneg || |
| ecmd->advertising != prev.advertising) { |
| bool xnp = false; |
| |
| if (efx->phy_op->set_xnp_advertise) |
| xnp = efx->phy_op->set_xnp_advertise(efx, |
| ecmd->advertising); |
| |
| if (ecmd->autoneg) { |
| reg = 0; |
| if (ecmd->advertising & ADVERTISED_10baseT_Half) |
| reg |= ADVERTISE_10HALF; |
| if (ecmd->advertising & ADVERTISED_10baseT_Full) |
| reg |= ADVERTISE_10FULL; |
| if (ecmd->advertising & ADVERTISED_100baseT_Half) |
| reg |= ADVERTISE_100HALF; |
| if (ecmd->advertising & ADVERTISED_100baseT_Full) |
| reg |= ADVERTISE_100FULL; |
| if (xnp) |
| reg |= ADVERTISE_RESV; |
| mdio_clause45_write(efx, phy_id, MDIO_MMD_AN, |
| MDIO_AN_ADVERTISE, reg); |
| } |
| |
| reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_AN, |
| MDIO_MMDREG_CTRL1); |
| if (ecmd->autoneg) |
| reg |= BMCR_ANENABLE | BMCR_ANRESTART; |
| else |
| reg &= ~BMCR_ANENABLE; |
| if (EFX_WORKAROUND_15195(efx) |
| && LOOPBACK_MASK(efx) & efx->phy_op->loopbacks) |
| reg &= ~BMCR_ANRESTART; |
| if (xnp) |
| reg |= 1 << MDIO_AN_CTRL_XNP_LBN; |
| else |
| reg &= ~(1 << MDIO_AN_CTRL_XNP_LBN); |
| mdio_clause45_write(efx, phy_id, MDIO_MMD_AN, |
| MDIO_MMDREG_CTRL1, reg); |
| } |
| |
| return 0; |
| } |
| |
| void mdio_clause45_set_pause(struct efx_nic *efx) |
| { |
| int phy_id = efx->mii.phy_id; |
| int reg; |
| |
| if (efx->phy_op->mmds & DEV_PRESENT_BIT(MDIO_MMD_AN)) { |
| /* Set pause capability advertising */ |
| reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_AN, |
| MDIO_AN_ADVERTISE); |
| reg &= ~(ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM); |
| reg |= efx_fc_advertise(efx->wanted_fc); |
| mdio_clause45_write(efx, phy_id, MDIO_MMD_AN, |
| MDIO_AN_ADVERTISE, reg); |
| |
| /* Restart auto-negotiation */ |
| reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_AN, |
| MDIO_MMDREG_CTRL1); |
| if (reg & BMCR_ANENABLE) { |
| reg |= BMCR_ANRESTART; |
| mdio_clause45_write(efx, phy_id, MDIO_MMD_AN, |
| MDIO_MMDREG_CTRL1, reg); |
| } |
| } |
| } |
| |
| enum efx_fc_type mdio_clause45_get_pause(struct efx_nic *efx) |
| { |
| int phy_id = efx->mii.phy_id; |
| int lpa; |
| |
| if (!(efx->phy_op->mmds & DEV_PRESENT_BIT(MDIO_MMD_AN))) |
| return efx->wanted_fc; |
| lpa = mdio_clause45_read(efx, phy_id, MDIO_MMD_AN, MDIO_AN_LPA); |
| return efx_fc_resolve(efx->wanted_fc, lpa); |
| } |
| |
| void mdio_clause45_set_flag(struct efx_nic *efx, u8 prt, u8 dev, |
| u16 addr, int bit, bool sense) |
| { |
| int old_val = mdio_clause45_read(efx, prt, dev, addr); |
| int new_val; |
| |
| if (sense) |
| new_val = old_val | (1 << bit); |
| else |
| new_val = old_val & ~(1 << bit); |
| if (old_val != new_val) |
| mdio_clause45_write(efx, prt, dev, addr, new_val); |
| } |