arch/arm/mach-msm/pil-gss.c - fp2-dev/kernel/msm - Gitiles

 /*
  * Copyright (c) 2012, Code Aurora Forum. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 and
  * only version 2 as published by the Free Software Foundation.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  */

 #include <linux/kernel.h>
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/elf.h>
 #include <linux/delay.h>
 #include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
 #include <linux/smp.h>

 #include <mach/msm_iomap.h>
 #include <mach/msm_xo.h>
 #include <mach/socinfo.h>
 #include <mach/msm_bus_board.h>
 #include <mach/msm_bus.h>

 #include "peripheral-loader.h"
 #include "scm-pas.h"

 #define GSS_CSR_AHB_CLK_SEL	0x0
 #define GSS_CSR_RESET		0x4
 #define GSS_CSR_CLK_BLK_CONFIG	0x8
 #define GSS_CSR_CLK_ENABLE	0xC
 #define GSS_CSR_BOOT_REMAP	0x14
 #define GSS_CSR_POWER_UP_DOWN	0x18
 #define GSS_CSR_CFG_HID		0x2C

 #define GSS_SLP_CLK_CTL		(MSM_CLK_CTL_BASE + 0x2C60)
 #define GSS_RESET		(MSM_CLK_CTL_BASE + 0x2C64)
 #define GSS_CLAMP_ENA		(MSM_CLK_CTL_BASE + 0x2C68)
 #define GSS_CXO_SRC_CTL		(MSM_CLK_CTL_BASE + 0x2C74)

 #define PLL5_STATUS		(MSM_CLK_CTL_BASE + 0x30F8)
 #define PLL_ENA_GSS		(MSM_CLK_CTL_BASE + 0x3480)

 #define PLL5_VOTE		BIT(5)
 #define PLL_STATUS		BIT(16)
 #define REMAP_ENABLE		BIT(16)
 #define A5_POWER_STATUS		BIT(4)
 #define A5_POWER_ENA		BIT(0)
 #define NAV_POWER_ENA		BIT(1)
 #define XO_CLK_BRANCH_ENA	BIT(0)
 #define SLP_CLK_BRANCH_ENA	BIT(4)
 #define A5_RESET		BIT(0)

 struct gss_data {
 	void __iomem *base;
 	void __iomem *qgic2_base;
 	unsigned long start_addr;
 	struct clk *xo;
 	struct pil_device *pil;
 };

 static int pil_gss_init_image(struct pil_desc *pil, const u8 *metadata,
 		size_t size)
 {
 	const struct elf32_hdr *ehdr = (struct elf32_hdr *)metadata;
 	struct gss_data *drv = dev_get_drvdata(pil->dev);
 	drv->start_addr = ehdr->e_entry;
 	return 0;
 }

 static int make_gss_proxy_votes(struct pil_desc *pil)
 {
 	int ret;
 	struct gss_data *drv = dev_get_drvdata(pil->dev);

 	ret = clk_prepare_enable(drv->xo);
 	if (ret) {
 		dev_err(pil->dev, "Failed to enable XO\n");
 		return ret;
 	}
 	return 0;
 }

 static void remove_gss_proxy_votes(struct pil_desc *pil)
 {
 	struct gss_data *drv = dev_get_drvdata(pil->dev);
 	clk_disable_unprepare(drv->xo);
 }

 static void gss_init(struct gss_data *drv)
 {
 	void __iomem *base = drv->base;

 	/* Supply clocks to GSS. */
 	writel_relaxed(XO_CLK_BRANCH_ENA, GSS_CXO_SRC_CTL);
 	writel_relaxed(SLP_CLK_BRANCH_ENA, GSS_SLP_CLK_CTL);

 	/* Deassert GSS reset and clamps. */
 	writel_relaxed(0x0, GSS_RESET);
 	writel_relaxed(0x0, GSS_CLAMP_ENA);
 	mb();

 	/*
 	 * Configure clock source and dividers for 288MHz core, 144MHz AXI and
 	 * 72MHz AHB, all derived from the 288MHz PLL.
 	 */
 	writel_relaxed(0x341, base + GSS_CSR_CLK_BLK_CONFIG);
 	writel_relaxed(0x1, base + GSS_CSR_AHB_CLK_SEL);

 	/* Assert all GSS resets. */
 	writel_relaxed(0x7F, base + GSS_CSR_RESET);

 	/* Enable all bus clocks and wait for resets to propagate. */
 	writel_relaxed(0x1F, base + GSS_CSR_CLK_ENABLE);
 	mb();
 	udelay(1);

 	/* Release subsystem from reset, but leave A5 in reset. */
 	writel_relaxed(A5_RESET, base + GSS_CSR_RESET);
 }

 static void cfg_qgic2_bus_access(void *data)
 {
 	struct gss_data *drv = data;
 	int i;

 	/*
 	 * Apply a 8064 v1.0 workaround to configure QGIC bus access.
 	 * This must be done from Krait 0 to configure the Master ID
 	 * correctly.
 	 */
 	writel_relaxed(0x2, drv->base + GSS_CSR_CFG_HID);
 	for (i = 0; i <= 3; i++)
 		readl_relaxed(drv->qgic2_base);
 }

 static int pil_gss_shutdown(struct pil_desc *pil)
 {
 	struct gss_data *drv = dev_get_drvdata(pil->dev);
 	void __iomem *base = drv->base;
 	u32 regval;
 	int ret;

 	ret = clk_prepare_enable(drv->xo);
 	if (ret) {
 		dev_err(pil->dev, "Failed to enable XO\n");
 		return ret;
 	}

 	/* Make sure bus port is halted. */
 	msm_bus_axi_porthalt(MSM_BUS_MASTER_GSS_NAV);

 	/*
 	 * Vote PLL on in GSS's voting register and wait for it to enable.
 	 * The PLL must be enable to switch the GFMUX to a low-power source.
 	 */
 	writel_relaxed(PLL5_VOTE, PLL_ENA_GSS);
 	while ((readl_relaxed(PLL5_STATUS) & PLL_STATUS) == 0)
 		cpu_relax();

 	/* Perform one-time GSS initialization. */
 	gss_init(drv);

 	/* Assert A5 reset. */
 	regval = readl_relaxed(base + GSS_CSR_RESET);
 	regval |= A5_RESET;
 	writel_relaxed(regval, base + GSS_CSR_RESET);

 	/* Power down A5 and NAV. */
 	regval = readl_relaxed(base + GSS_CSR_POWER_UP_DOWN);
 	regval &= ~(A5_POWER_ENA|NAV_POWER_ENA);
 	writel_relaxed(regval, base + GSS_CSR_POWER_UP_DOWN);

 	/* Select XO clock source and increase dividers to save power. */
 	regval = readl_relaxed(base + GSS_CSR_CLK_BLK_CONFIG);
 	regval |= 0x3FF;
 	writel_relaxed(regval, base + GSS_CSR_CLK_BLK_CONFIG);

 	/* Disable bus clocks. */
 	writel_relaxed(0x1F, base + GSS_CSR_CLK_ENABLE);

 	/* Clear GSS PLL votes. */
 	writel_relaxed(0, PLL_ENA_GSS);
 	mb();

 	clk_disable_unprepare(drv->xo);

 	return 0;
 }

 static int pil_gss_reset(struct pil_desc *pil)
 {
 	struct gss_data *drv = dev_get_drvdata(pil->dev);
 	void __iomem *base = drv->base;
 	unsigned long start_addr = drv->start_addr;
 	int ret;

 	/* Unhalt bus port. */
 	ret = msm_bus_axi_portunhalt(MSM_BUS_MASTER_GSS_NAV);
 	if (ret) {
 		dev_err(pil->dev, "Failed to unhalt bus port\n");
 		return ret;
 	}

 	/* Vote PLL on in GSS's voting register and wait for it to enable. */
 	writel_relaxed(PLL5_VOTE, PLL_ENA_GSS);
 	while ((readl_relaxed(PLL5_STATUS) & PLL_STATUS) == 0)
 		cpu_relax();

 	/* Perform GSS initialization. */
 	gss_init(drv);

 	/* Configure boot address and enable remap. */
 	writel_relaxed(REMAP_ENABLE | (start_addr >> 16),
 			base + GSS_CSR_BOOT_REMAP);

 	/* Power up A5 core. */
 	writel_relaxed(A5_POWER_ENA, base + GSS_CSR_POWER_UP_DOWN);
 	while (!(readl_relaxed(base + GSS_CSR_POWER_UP_DOWN) & A5_POWER_STATUS))
 		cpu_relax();

 	if (cpu_is_apq8064() &&
 	    ((SOCINFO_VERSION_MAJOR(socinfo_get_version()) == 1) &&
 	     (SOCINFO_VERSION_MINOR(socinfo_get_version()) == 0))) {
 		ret = smp_call_function_single(0, cfg_qgic2_bus_access, drv, 1);
 		if (ret) {
 			pr_err("Failed to configure QGIC2 bus access\n");
 			pil_gss_shutdown(pil);
 			return ret;
 		}
 	}

 	/* Release A5 from reset. */
 	writel_relaxed(0x0, base + GSS_CSR_RESET);

 	return 0;
 }

 static struct pil_reset_ops pil_gss_ops = {
 	.init_image = pil_gss_init_image,
 	.auth_and_reset = pil_gss_reset,
 	.shutdown = pil_gss_shutdown,
 	.proxy_vote = make_gss_proxy_votes,
 	.proxy_unvote = remove_gss_proxy_votes,
 };

 static int pil_gss_init_image_trusted(struct pil_desc *pil,
 		const u8 *metadata, size_t size)
 {
 	return pas_init_image(PAS_GSS, metadata, size);
 }

 static int pil_gss_shutdown_trusted(struct pil_desc *pil)
 {
 	struct gss_data *drv = dev_get_drvdata(pil->dev);
 	int ret;

 	/*
 	 * CXO is used in the secure shutdown code to configure the processor
 	 * for low power mode.
 	 */
 	ret = clk_prepare_enable(drv->xo);
 	if (ret) {
 		dev_err(pil->dev, "Failed to enable XO\n");
 		return ret;
 	}

 	msm_bus_axi_porthalt(MSM_BUS_MASTER_GSS_NAV);
 	ret = pas_shutdown(PAS_GSS);
 	clk_disable_unprepare(drv->xo);

 	return ret;
 }

 static int pil_gss_reset_trusted(struct pil_desc *pil)
 {
 	int err;

 	err = msm_bus_axi_portunhalt(MSM_BUS_MASTER_GSS_NAV);
 	if (err) {
 		dev_err(pil->dev, "Failed to unhalt bus port\n");
 		goto out;
 	}

 	err =  pas_auth_and_reset(PAS_GSS);
 	if (err)
 		goto halt_port;

 	return 0;

 halt_port:
 	msm_bus_axi_porthalt(MSM_BUS_MASTER_GSS_NAV);
 out:
 	return err;
 }

 static struct pil_reset_ops pil_gss_ops_trusted = {
 	.init_image = pil_gss_init_image_trusted,
 	.auth_and_reset = pil_gss_reset_trusted,
 	.shutdown = pil_gss_shutdown_trusted,
 	.proxy_vote = make_gss_proxy_votes,
 	.proxy_unvote = remove_gss_proxy_votes,
 };

 static int __devinit pil_gss_probe(struct platform_device *pdev)
 {
 	struct gss_data *drv;
 	struct resource *res;
 	struct pil_desc *desc;

 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res)
 		return -EINVAL;

 	drv = devm_kzalloc(&pdev->dev, sizeof(*drv), GFP_KERNEL);
 	if (!drv)
 		return -ENOMEM;
 	platform_set_drvdata(pdev, drv);

 	drv->base = devm_ioremap(&pdev->dev, res->start, resource_size(res));
 	if (!drv->base)
 		return -ENOMEM;

 	desc = devm_kzalloc(&pdev->dev, sizeof(*desc), GFP_KERNEL);
 	if (!desc)
 		return -ENOMEM;

 	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
 	if (!res)
 		return -EINVAL;

 	drv->qgic2_base = devm_ioremap(&pdev->dev, res->start,
 					resource_size(res));
 	if (!drv->qgic2_base)
 		return -ENOMEM;

 	drv->xo = devm_clk_get(&pdev->dev, "xo");
 	if (IS_ERR(drv->xo))
 		return PTR_ERR(drv->xo);

 	desc->name = "gss";
 	desc->dev = &pdev->dev;
 	desc->owner = THIS_MODULE;
 	desc->proxy_timeout = 10000;

 	if (pas_supported(PAS_GSS) > 0) {
 		desc->ops = &pil_gss_ops_trusted;
 		dev_info(&pdev->dev, "using secure boot\n");
 	} else {
 		desc->ops = &pil_gss_ops;
 		dev_info(&pdev->dev, "using non-secure boot\n");
 	}

 	drv->pil = msm_pil_register(desc);
 	if (IS_ERR(drv->pil)) {
 		return PTR_ERR(drv->pil);
 	}
 	return 0;
 }

 static int __devexit pil_gss_remove(struct platform_device *pdev)
 {
 	struct gss_data *drv = platform_get_drvdata(pdev);
 	msm_pil_unregister(drv->pil);
 	return 0;
 }

 static struct platform_driver pil_gss_driver = {
 	.probe = pil_gss_probe,
 	.remove = __devexit_p(pil_gss_remove),
 	.driver = {
 		.name = "pil_gss",
 		.owner = THIS_MODULE,
 	},
 };

 static int __init pil_gss_init(void)
 {
 	return platform_driver_register(&pil_gss_driver);
 }
 module_init(pil_gss_init);

 static void __exit pil_gss_exit(void)
 {
 	platform_driver_unregister(&pil_gss_driver);
 }
 module_exit(pil_gss_exit);

 MODULE_DESCRIPTION("Support for booting the GSS processor");
 MODULE_LICENSE("GPL v2");
	/*
	* Copyright (c) 2012, Code Aurora Forum. All rights reserved.
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License version 2 and
	* only version 2 as published by the Free Software Foundation.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*/

	#include <linux/kernel.h>
	#include <linux/err.h>
	#include <linux/io.h>
	#include <linux/elf.h>
	#include <linux/delay.h>
	#include <linux/module.h>
	#include <linux/slab.h>
	#include <linux/platform_device.h>
	#include <linux/clk.h>
	#include <linux/smp.h>

	#include <mach/msm_iomap.h>
	#include <mach/msm_xo.h>
	#include <mach/socinfo.h>
	#include <mach/msm_bus_board.h>
	#include <mach/msm_bus.h>

	#include "peripheral-loader.h"
	#include "scm-pas.h"

	#define GSS_CSR_AHB_CLK_SEL 0x0
	#define GSS_CSR_RESET 0x4
	#define GSS_CSR_CLK_BLK_CONFIG 0x8
	#define GSS_CSR_CLK_ENABLE 0xC
	#define GSS_CSR_BOOT_REMAP 0x14
	#define GSS_CSR_POWER_UP_DOWN 0x18
	#define GSS_CSR_CFG_HID 0x2C

	#define GSS_SLP_CLK_CTL (MSM_CLK_CTL_BASE + 0x2C60)
	#define GSS_RESET (MSM_CLK_CTL_BASE + 0x2C64)
	#define GSS_CLAMP_ENA (MSM_CLK_CTL_BASE + 0x2C68)
	#define GSS_CXO_SRC_CTL (MSM_CLK_CTL_BASE + 0x2C74)

	#define PLL5_STATUS (MSM_CLK_CTL_BASE + 0x30F8)
	#define PLL_ENA_GSS (MSM_CLK_CTL_BASE + 0x3480)

	#define PLL5_VOTE BIT(5)
	#define PLL_STATUS BIT(16)
	#define REMAP_ENABLE BIT(16)
	#define A5_POWER_STATUS BIT(4)
	#define A5_POWER_ENA BIT(0)
	#define NAV_POWER_ENA BIT(1)
	#define XO_CLK_BRANCH_ENA BIT(0)
	#define SLP_CLK_BRANCH_ENA BIT(4)
	#define A5_RESET BIT(0)

	struct gss_data {
	void __iomem *base;
	void __iomem *qgic2_base;
	unsigned long start_addr;
	struct clk *xo;
	struct pil_device *pil;
	};

	static int pil_gss_init_image(struct pil_desc pil, const u8 metadata,
	size_t size)
	{
	const struct elf32_hdr ehdr = (struct elf32_hdr )metadata;
	struct gss_data *drv = dev_get_drvdata(pil->dev);
	drv->start_addr = ehdr->e_entry;
	return 0;
	}

	static int make_gss_proxy_votes(struct pil_desc *pil)
	{
	int ret;
	struct gss_data *drv = dev_get_drvdata(pil->dev);

	ret = clk_prepare_enable(drv->xo);
	if (ret) {
	dev_err(pil->dev, "Failed to enable XO\n");
	return ret;
	}
	return 0;
	}

	static void remove_gss_proxy_votes(struct pil_desc *pil)
	{
	struct gss_data *drv = dev_get_drvdata(pil->dev);
	clk_disable_unprepare(drv->xo);
	}

	static void gss_init(struct gss_data *drv)
	{
	void __iomem *base = drv->base;

	/* Supply clocks to GSS. */
	writel_relaxed(XO_CLK_BRANCH_ENA, GSS_CXO_SRC_CTL);
	writel_relaxed(SLP_CLK_BRANCH_ENA, GSS_SLP_CLK_CTL);

	/* Deassert GSS reset and clamps. */
	writel_relaxed(0x0, GSS_RESET);
	writel_relaxed(0x0, GSS_CLAMP_ENA);
	mb();

	/*
	* Configure clock source and dividers for 288MHz core, 144MHz AXI and
	* 72MHz AHB, all derived from the 288MHz PLL.
	*/
	writel_relaxed(0x341, base + GSS_CSR_CLK_BLK_CONFIG);
	writel_relaxed(0x1, base + GSS_CSR_AHB_CLK_SEL);

	/* Assert all GSS resets. */
	writel_relaxed(0x7F, base + GSS_CSR_RESET);

	/* Enable all bus clocks and wait for resets to propagate. */
	writel_relaxed(0x1F, base + GSS_CSR_CLK_ENABLE);
	mb();
	udelay(1);

	/* Release subsystem from reset, but leave A5 in reset. */
	writel_relaxed(A5_RESET, base + GSS_CSR_RESET);
	}

	static void cfg_qgic2_bus_access(void *data)
	{
	struct gss_data *drv = data;
	int i;

	/*
	* Apply a 8064 v1.0 workaround to configure QGIC bus access.
	* This must be done from Krait 0 to configure the Master ID
	* correctly.
	*/
	writel_relaxed(0x2, drv->base + GSS_CSR_CFG_HID);
	for (i = 0; i <= 3; i++)
	readl_relaxed(drv->qgic2_base);
	}

	static int pil_gss_shutdown(struct pil_desc *pil)
	{
	struct gss_data *drv = dev_get_drvdata(pil->dev);
	void __iomem *base = drv->base;
	u32 regval;
	int ret;

	ret = clk_prepare_enable(drv->xo);
	if (ret) {
	dev_err(pil->dev, "Failed to enable XO\n");
	return ret;
	}

	/* Make sure bus port is halted. */
	msm_bus_axi_porthalt(MSM_BUS_MASTER_GSS_NAV);

	/*
	* Vote PLL on in GSS's voting register and wait for it to enable.
	* The PLL must be enable to switch the GFMUX to a low-power source.
	*/
	writel_relaxed(PLL5_VOTE, PLL_ENA_GSS);
	while ((readl_relaxed(PLL5_STATUS) & PLL_STATUS) == 0)
	cpu_relax();

	/* Perform one-time GSS initialization. */
	gss_init(drv);

	/* Assert A5 reset. */
	regval = readl_relaxed(base + GSS_CSR_RESET);
	regval \|= A5_RESET;
	writel_relaxed(regval, base + GSS_CSR_RESET);

	/* Power down A5 and NAV. */
	regval = readl_relaxed(base + GSS_CSR_POWER_UP_DOWN);
	regval &= ~(A5_POWER_ENA\|NAV_POWER_ENA);
	writel_relaxed(regval, base + GSS_CSR_POWER_UP_DOWN);

	/* Select XO clock source and increase dividers to save power. */
	regval = readl_relaxed(base + GSS_CSR_CLK_BLK_CONFIG);
	regval \|= 0x3FF;
	writel_relaxed(regval, base + GSS_CSR_CLK_BLK_CONFIG);

	/* Disable bus clocks. */
	writel_relaxed(0x1F, base + GSS_CSR_CLK_ENABLE);

	/* Clear GSS PLL votes. */
	writel_relaxed(0, PLL_ENA_GSS);
	mb();

	clk_disable_unprepare(drv->xo);

	return 0;
	}

	static int pil_gss_reset(struct pil_desc *pil)
	{
	struct gss_data *drv = dev_get_drvdata(pil->dev);
	void __iomem *base = drv->base;
	unsigned long start_addr = drv->start_addr;
	int ret;

	/* Unhalt bus port. */
	ret = msm_bus_axi_portunhalt(MSM_BUS_MASTER_GSS_NAV);
	if (ret) {
	dev_err(pil->dev, "Failed to unhalt bus port\n");
	return ret;
	}

	/* Vote PLL on in GSS's voting register and wait for it to enable. */
	writel_relaxed(PLL5_VOTE, PLL_ENA_GSS);
	while ((readl_relaxed(PLL5_STATUS) & PLL_STATUS) == 0)
	cpu_relax();

	/* Perform GSS initialization. */
	gss_init(drv);

	/* Configure boot address and enable remap. */
	writel_relaxed(REMAP_ENABLE \| (start_addr >> 16),
	base + GSS_CSR_BOOT_REMAP);

	/* Power up A5 core. */
	writel_relaxed(A5_POWER_ENA, base + GSS_CSR_POWER_UP_DOWN);
	while (!(readl_relaxed(base + GSS_CSR_POWER_UP_DOWN) & A5_POWER_STATUS))
	cpu_relax();

	if (cpu_is_apq8064() &&
	((SOCINFO_VERSION_MAJOR(socinfo_get_version()) == 1) &&
	(SOCINFO_VERSION_MINOR(socinfo_get_version()) == 0))) {
	ret = smp_call_function_single(0, cfg_qgic2_bus_access, drv, 1);
	if (ret) {
	pr_err("Failed to configure QGIC2 bus access\n");
	pil_gss_shutdown(pil);
	return ret;
	}
	}

	/* Release A5 from reset. */
	writel_relaxed(0x0, base + GSS_CSR_RESET);

	return 0;
	}

	static struct pil_reset_ops pil_gss_ops = {
	.init_image = pil_gss_init_image,
	.auth_and_reset = pil_gss_reset,
	.shutdown = pil_gss_shutdown,
	.proxy_vote = make_gss_proxy_votes,
	.proxy_unvote = remove_gss_proxy_votes,
	};

	static int pil_gss_init_image_trusted(struct pil_desc *pil,
	const u8 *metadata, size_t size)
	{
	return pas_init_image(PAS_GSS, metadata, size);
	}

	static int pil_gss_shutdown_trusted(struct pil_desc *pil)
	{
	struct gss_data *drv = dev_get_drvdata(pil->dev);
	int ret;

	/*
	* CXO is used in the secure shutdown code to configure the processor
	* for low power mode.
	*/
	ret = clk_prepare_enable(drv->xo);
	if (ret) {
	dev_err(pil->dev, "Failed to enable XO\n");
	return ret;
	}

	msm_bus_axi_porthalt(MSM_BUS_MASTER_GSS_NAV);
	ret = pas_shutdown(PAS_GSS);
	clk_disable_unprepare(drv->xo);

	return ret;
	}

	static int pil_gss_reset_trusted(struct pil_desc *pil)
	{
	int err;

	err = msm_bus_axi_portunhalt(MSM_BUS_MASTER_GSS_NAV);
	if (err) {
	dev_err(pil->dev, "Failed to unhalt bus port\n");
	goto out;
	}

	err = pas_auth_and_reset(PAS_GSS);
	if (err)
	goto halt_port;

	return 0;

	halt_port:
	msm_bus_axi_porthalt(MSM_BUS_MASTER_GSS_NAV);
	out:
	return err;
	}

	static struct pil_reset_ops pil_gss_ops_trusted = {
	.init_image = pil_gss_init_image_trusted,
	.auth_and_reset = pil_gss_reset_trusted,
	.shutdown = pil_gss_shutdown_trusted,
	.proxy_vote = make_gss_proxy_votes,
	.proxy_unvote = remove_gss_proxy_votes,
	};

	static int __devinit pil_gss_probe(struct platform_device *pdev)
	{
	struct gss_data *drv;
	struct resource *res;
	struct pil_desc *desc;

	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
	if (!res)
	return -EINVAL;

	drv = devm_kzalloc(&pdev->dev, sizeof(*drv), GFP_KERNEL);
	if (!drv)
	return -ENOMEM;
	platform_set_drvdata(pdev, drv);

	drv->base = devm_ioremap(&pdev->dev, res->start, resource_size(res));
	if (!drv->base)
	return -ENOMEM;

	desc = devm_kzalloc(&pdev->dev, sizeof(*desc), GFP_KERNEL);
	if (!desc)
	return -ENOMEM;

	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
	if (!res)
	return -EINVAL;

	drv->qgic2_base = devm_ioremap(&pdev->dev, res->start,
	resource_size(res));
	if (!drv->qgic2_base)
	return -ENOMEM;

	drv->xo = devm_clk_get(&pdev->dev, "xo");
	if (IS_ERR(drv->xo))
	return PTR_ERR(drv->xo);

	desc->name = "gss";
	desc->dev = &pdev->dev;
	desc->owner = THIS_MODULE;
	desc->proxy_timeout = 10000;

	if (pas_supported(PAS_GSS) > 0) {
	desc->ops = &pil_gss_ops_trusted;
	dev_info(&pdev->dev, "using secure boot\n");
	} else {
	desc->ops = &pil_gss_ops;
	dev_info(&pdev->dev, "using non-secure boot\n");
	}

	drv->pil = msm_pil_register(desc);
	if (IS_ERR(drv->pil)) {
	return PTR_ERR(drv->pil);
	}
	return 0;
	}

	static int __devexit pil_gss_remove(struct platform_device *pdev)
	{
	struct gss_data *drv = platform_get_drvdata(pdev);
	msm_pil_unregister(drv->pil);
	return 0;
	}

	static struct platform_driver pil_gss_driver = {
	.probe = pil_gss_probe,
	.remove = __devexit_p(pil_gss_remove),
	.driver = {
	.name = "pil_gss",
	.owner = THIS_MODULE,
	},
	};

	static int __init pil_gss_init(void)
	{
	return platform_driver_register(&pil_gss_driver);
	}
	module_init(pil_gss_init);

	static void __exit pil_gss_exit(void)
	{
	platform_driver_unregister(&pil_gss_driver);
	}
	module_exit(pil_gss_exit);

	MODULE_DESCRIPTION("Support for booting the GSS processor");
	MODULE_LICENSE("GPL v2");