| CPU hotplug Support in Linux(tm) Kernel |
| |
| Maintainers: |
| CPU Hotplug Core: |
| Rusty Russell <rusty@rustycorp.com.au> |
| Srivatsa Vaddagiri <vatsa@in.ibm.com> |
| i386: |
| Zwane Mwaikambo <zwane@arm.linux.org.uk> |
| ppc64: |
| Nathan Lynch <nathanl@austin.ibm.com> |
| Joel Schopp <jschopp@austin.ibm.com> |
| ia64/x86_64: |
| Ashok Raj <ashok.raj@intel.com> |
| |
| Authors: Ashok Raj <ashok.raj@intel.com> |
| Lots of feedback: Nathan Lynch <nathanl@austin.ibm.com>, |
| Joel Schopp <jschopp@austin.ibm.com> |
| |
| Introduction |
| |
| Modern advances in system architectures have introduced advanced error |
| reporting and correction capabilities in processors. CPU architectures permit |
| partitioning support, where compute resources of a single CPU could be made |
| available to virtual machine environments. There are couple OEMS that |
| support NUMA hardware which are hot pluggable as well, where physical |
| node insertion and removal require support for CPU hotplug. |
| |
| Such advances require CPUs available to a kernel to be removed either for |
| provisioning reasons, or for RAS purposes to keep an offending CPU off |
| system execution path. Hence the need for CPU hotplug support in the |
| Linux kernel. |
| |
| A more novel use of CPU-hotplug support is its use today in suspend |
| resume support for SMP. Dual-core and HT support makes even |
| a laptop run SMP kernels which didn't support these methods. SMP support |
| for suspend/resume is a work in progress. |
| |
| General Stuff about CPU Hotplug |
| -------------------------------- |
| |
| Command Line Switches |
| --------------------- |
| maxcpus=n Restrict boot time cpus to n. Say if you have 4 cpus, using |
| maxcpus=2 will only boot 2. You can choose to bring the |
| other cpus later online, read FAQ's for more info. |
| |
| additional_cpus=n [x86_64 only] use this to limit hotpluggable cpus. |
| This option sets |
| cpu_possible_map = cpu_present_map + additional_cpus |
| |
| CPU maps and such |
| ----------------- |
| [More on cpumaps and primitive to manipulate, please check |
| include/linux/cpumask.h that has more descriptive text.] |
| |
| cpu_possible_map: Bitmap of possible CPUs that can ever be available in the |
| system. This is used to allocate some boot time memory for per_cpu variables |
| that aren't designed to grow/shrink as CPUs are made available or removed. |
| Once set during boot time discovery phase, the map is static, i.e no bits |
| are added or removed anytime. Trimming it accurately for your system needs |
| upfront can save some boot time memory. See below for how we use heuristics |
| in x86_64 case to keep this under check. |
| |
| cpu_online_map: Bitmap of all CPUs currently online. Its set in __cpu_up() |
| after a cpu is available for kernel scheduling and ready to receive |
| interrupts from devices. Its cleared when a cpu is brought down using |
| __cpu_disable(), before which all OS services including interrupts are |
| migrated to another target CPU. |
| |
| cpu_present_map: Bitmap of CPUs currently present in the system. Not all |
| of them may be online. When physical hotplug is processed by the relevant |
| subsystem (e.g ACPI) can change and new bit either be added or removed |
| from the map depending on the event is hot-add/hot-remove. There are currently |
| no locking rules as of now. Typical usage is to init topology during boot, |
| at which time hotplug is disabled. |
| |
| You really dont need to manipulate any of the system cpu maps. They should |
| be read-only for most use. When setting up per-cpu resources almost always use |
| cpu_possible_map/for_each_cpu() to iterate. |
| |
| Never use anything other than cpumask_t to represent bitmap of CPUs. |
| |
| #include <linux/cpumask.h> |
| |
| for_each_cpu - Iterate over cpu_possible_map |
| for_each_online_cpu - Iterate over cpu_online_map |
| for_each_present_cpu - Iterate over cpu_present_map |
| for_each_cpu_mask(x,mask) - Iterate over some random collection of cpu mask. |
| |
| #include <linux/cpu.h> |
| lock_cpu_hotplug() and unlock_cpu_hotplug(): |
| |
| The above calls are used to inhibit cpu hotplug operations. While holding the |
| cpucontrol mutex, cpu_online_map will not change. If you merely need to avoid |
| cpus going away, you could also use preempt_disable() and preempt_enable() |
| for those sections. Just remember the critical section cannot call any |
| function that can sleep or schedule this process away. The preempt_disable() |
| will work as long as stop_machine_run() is used to take a cpu down. |
| |
| CPU Hotplug - Frequently Asked Questions. |
| |
| Q: How to i enable my kernel to support CPU hotplug? |
| A: When doing make defconfig, Enable CPU hotplug support |
| |
| "Processor type and Features" -> Support for Hotpluggable CPUs |
| |
| Make sure that you have CONFIG_HOTPLUG, and CONFIG_SMP turned on as well. |
| |
| You would need to enable CONFIG_HOTPLUG_CPU for SMP suspend/resume support |
| as well. |
| |
| Q: What architectures support CPU hotplug? |
| A: As of 2.6.14, the following architectures support CPU hotplug. |
| |
| i386 (Intel), ppc, ppc64, parisc, s390, ia64 and x86_64 |
| |
| Q: How to test if hotplug is supported on the newly built kernel? |
| A: You should now notice an entry in sysfs. |
| |
| Check if sysfs is mounted, using the "mount" command. You should notice |
| an entry as shown below in the output. |
| |
| .... |
| none on /sys type sysfs (rw) |
| .... |
| |
| if this is not mounted, do the following. |
| |
| #mkdir /sysfs |
| #mount -t sysfs sys /sys |
| |
| now you should see entries for all present cpu, the following is an example |
| in a 8-way system. |
| |
| #pwd |
| #/sys/devices/system/cpu |
| #ls -l |
| total 0 |
| drwxr-xr-x 10 root root 0 Sep 19 07:44 . |
| drwxr-xr-x 13 root root 0 Sep 19 07:45 .. |
| drwxr-xr-x 3 root root 0 Sep 19 07:44 cpu0 |
| drwxr-xr-x 3 root root 0 Sep 19 07:44 cpu1 |
| drwxr-xr-x 3 root root 0 Sep 19 07:44 cpu2 |
| drwxr-xr-x 3 root root 0 Sep 19 07:44 cpu3 |
| drwxr-xr-x 3 root root 0 Sep 19 07:44 cpu4 |
| drwxr-xr-x 3 root root 0 Sep 19 07:44 cpu5 |
| drwxr-xr-x 3 root root 0 Sep 19 07:44 cpu6 |
| drwxr-xr-x 3 root root 0 Sep 19 07:48 cpu7 |
| |
| Under each directory you would find an "online" file which is the control |
| file to logically online/offline a processor. |
| |
| Q: Does hot-add/hot-remove refer to physical add/remove of cpus? |
| A: The usage of hot-add/remove may not be very consistently used in the code. |
| CONFIG_CPU_HOTPLUG enables logical online/offline capability in the kernel. |
| To support physical addition/removal, one would need some BIOS hooks and |
| the platform should have something like an attention button in PCI hotplug. |
| CONFIG_ACPI_HOTPLUG_CPU enables ACPI support for physical add/remove of CPUs. |
| |
| Q: How do i logically offline a CPU? |
| A: Do the following. |
| |
| #echo 0 > /sys/devices/system/cpu/cpuX/online |
| |
| once the logical offline is successful, check |
| |
| #cat /proc/interrupts |
| |
| you should now not see the CPU that you removed. Also online file will report |
| the state as 0 when a cpu if offline and 1 when its online. |
| |
| #To display the current cpu state. |
| #cat /sys/devices/system/cpu/cpuX/online |
| |
| Q: Why cant i remove CPU0 on some systems? |
| A: Some architectures may have some special dependency on a certain CPU. |
| |
| For e.g in IA64 platforms we have ability to sent platform interrupts to the |
| OS. a.k.a Corrected Platform Error Interrupts (CPEI). In current ACPI |
| specifications, we didn't have a way to change the target CPU. Hence if the |
| current ACPI version doesn't support such re-direction, we disable that CPU |
| by making it not-removable. |
| |
| In such cases you will also notice that the online file is missing under cpu0. |
| |
| Q: How do i find out if a particular CPU is not removable? |
| A: Depending on the implementation, some architectures may show this by the |
| absence of the "online" file. This is done if it can be determined ahead of |
| time that this CPU cannot be removed. |
| |
| In some situations, this can be a run time check, i.e if you try to remove the |
| last CPU, this will not be permitted. You can find such failures by |
| investigating the return value of the "echo" command. |
| |
| Q: What happens when a CPU is being logically offlined? |
| A: The following happen, listed in no particular order :-) |
| |
| - A notification is sent to in-kernel registered modules by sending an event |
| CPU_DOWN_PREPARE |
| - All process is migrated away from this outgoing CPU to a new CPU |
| - All interrupts targeted to this CPU is migrated to a new CPU |
| - timers/bottom half/task lets are also migrated to a new CPU |
| - Once all services are migrated, kernel calls an arch specific routine |
| __cpu_disable() to perform arch specific cleanup. |
| - Once this is successful, an event for successful cleanup is sent by an event |
| CPU_DEAD. |
| |
| "It is expected that each service cleans up when the CPU_DOWN_PREPARE |
| notifier is called, when CPU_DEAD is called its expected there is nothing |
| running on behalf of this CPU that was offlined" |
| |
| Q: If i have some kernel code that needs to be aware of CPU arrival and |
| departure, how to i arrange for proper notification? |
| A: This is what you would need in your kernel code to receive notifications. |
| |
| #include <linux/cpu.h> |
| static int __cpuinit foobar_cpu_callback(struct notifier_block *nfb, |
| unsigned long action, void *hcpu) |
| { |
| unsigned int cpu = (unsigned long)hcpu; |
| |
| switch (action) { |
| case CPU_ONLINE: |
| foobar_online_action(cpu); |
| break; |
| case CPU_DEAD: |
| foobar_dead_action(cpu); |
| break; |
| } |
| return NOTIFY_OK; |
| } |
| |
| static struct notifier_block foobar_cpu_notifer = |
| { |
| .notifier_call = foobar_cpu_callback, |
| }; |
| |
| |
| In your init function, |
| |
| register_cpu_notifier(&foobar_cpu_notifier); |
| |
| You can fail PREPARE notifiers if something doesn't work to prepare resources. |
| This will stop the activity and send a following CANCELED event back. |
| |
| CPU_DEAD should not be failed, its just a goodness indication, but bad |
| things will happen if a notifier in path sent a BAD notify code. |
| |
| Q: I don't see my action being called for all CPUs already up and running? |
| A: Yes, CPU notifiers are called only when new CPUs are on-lined or offlined. |
| If you need to perform some action for each cpu already in the system, then |
| |
| for_each_online_cpu(i) { |
| foobar_cpu_callback(&foobar_cpu_notifier, CPU_UP_PREPARE, i); |
| foobar_cpu_callback(&foobar-cpu_notifier, CPU_ONLINE, i); |
| } |
| |
| Q: If i would like to develop cpu hotplug support for a new architecture, |
| what do i need at a minimum? |
| A: The following are what is required for CPU hotplug infrastructure to work |
| correctly. |
| |
| - Make sure you have an entry in Kconfig to enable CONFIG_HOTPLUG_CPU |
| - __cpu_up() - Arch interface to bring up a CPU |
| - __cpu_disable() - Arch interface to shutdown a CPU, no more interrupts |
| can be handled by the kernel after the routine |
| returns. Including local APIC timers etc are |
| shutdown. |
| - __cpu_die() - This actually supposed to ensure death of the CPU. |
| Actually look at some example code in other arch |
| that implement CPU hotplug. The processor is taken |
| down from the idle() loop for that specific |
| architecture. __cpu_die() typically waits for some |
| per_cpu state to be set, to ensure the processor |
| dead routine is called to be sure positively. |
| |
| Q: I need to ensure that a particular cpu is not removed when there is some |
| work specific to this cpu is in progress. |
| A: First switch the current thread context to preferred cpu |
| |
| int my_func_on_cpu(int cpu) |
| { |
| cpumask_t saved_mask, new_mask = CPU_MASK_NONE; |
| int curr_cpu, err = 0; |
| |
| saved_mask = current->cpus_allowed; |
| cpu_set(cpu, new_mask); |
| err = set_cpus_allowed(current, new_mask); |
| |
| if (err) |
| return err; |
| |
| /* |
| * If we got scheduled out just after the return from |
| * set_cpus_allowed() before running the work, this ensures |
| * we stay locked. |
| */ |
| curr_cpu = get_cpu(); |
| |
| if (curr_cpu != cpu) { |
| err = -EAGAIN; |
| goto ret; |
| } else { |
| /* |
| * Do work : But cant sleep, since get_cpu() disables preempt |
| */ |
| } |
| ret: |
| put_cpu(); |
| set_cpus_allowed(current, saved_mask); |
| return err; |
| } |
| |
| |
| Q: How do we determine how many CPUs are available for hotplug. |
| A: There is no clear spec defined way from ACPI that can give us that |
| information today. Based on some input from Natalie of Unisys, |
| that the ACPI MADT (Multiple APIC Description Tables) marks those possible |
| CPUs in a system with disabled status. |
| |
| Andi implemented some simple heuristics that count the number of disabled |
| CPUs in MADT as hotpluggable CPUS. In the case there are no disabled CPUS |
| we assume 1/2 the number of CPUs currently present can be hotplugged. |
| |
| Caveat: Today's ACPI MADT can only provide 256 entries since the apicid field |
| in MADT is only 8 bits. |
| |
| User Space Notification |
| |
| Hotplug support for devices is common in Linux today. Its being used today to |
| support automatic configuration of network, usb and pci devices. A hotplug |
| event can be used to invoke an agent script to perform the configuration task. |
| |
| You can add /etc/hotplug/cpu.agent to handle hotplug notification user space |
| scripts. |
| |
| #!/bin/bash |
| # $Id: cpu.agent |
| # Kernel hotplug params include: |
| #ACTION=%s [online or offline] |
| #DEVPATH=%s |
| # |
| cd /etc/hotplug |
| . ./hotplug.functions |
| |
| case $ACTION in |
| online) |
| echo `date` ":cpu.agent" add cpu >> /tmp/hotplug.txt |
| ;; |
| offline) |
| echo `date` ":cpu.agent" remove cpu >>/tmp/hotplug.txt |
| ;; |
| *) |
| debug_mesg CPU $ACTION event not supported |
| exit 1 |
| ;; |
| esac |