| /* |
| * MPC8568E MDS Device Tree Source |
| * |
| * Copyright 2007 Freescale Semiconductor Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| */ |
| |
| |
| /* |
| /memreserve/ 00000000 1000000; |
| */ |
| |
| / { |
| model = "MPC8568EMDS"; |
| compatible = "MPC8568EMDS", "MPC85xxMDS"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| aliases { |
| ethernet0 = &enet0; |
| ethernet1 = &enet1; |
| ethernet2 = &enet2; |
| ethernet3 = &enet3; |
| serial0 = &serial0; |
| serial1 = &serial1; |
| pci0 = &pci0; |
| pci1 = &pci1; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| PowerPC,8568@0 { |
| device_type = "cpu"; |
| reg = <0>; |
| d-cache-line-size = <20>; // 32 bytes |
| i-cache-line-size = <20>; // 32 bytes |
| d-cache-size = <8000>; // L1, 32K |
| i-cache-size = <8000>; // L1, 32K |
| timebase-frequency = <0>; |
| bus-frequency = <0>; |
| clock-frequency = <0>; |
| }; |
| }; |
| |
| memory { |
| device_type = "memory"; |
| reg = <00000000 10000000>; |
| }; |
| |
| bcsr@f8000000 { |
| device_type = "board-control"; |
| reg = <f8000000 8000>; |
| }; |
| |
| soc8568@e0000000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| device_type = "soc"; |
| ranges = <0 e0000000 00100000>; |
| reg = <e0000000 00001000>; |
| bus-frequency = <0>; |
| |
| memory-controller@2000 { |
| compatible = "fsl,8568-memory-controller"; |
| reg = <2000 1000>; |
| interrupt-parent = <&mpic>; |
| interrupts = <12 2>; |
| }; |
| |
| l2-cache-controller@20000 { |
| compatible = "fsl,8568-l2-cache-controller"; |
| reg = <20000 1000>; |
| cache-line-size = <20>; // 32 bytes |
| cache-size = <80000>; // L2, 512K |
| interrupt-parent = <&mpic>; |
| interrupts = <10 2>; |
| }; |
| |
| i2c@3000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| cell-index = <0>; |
| compatible = "fsl-i2c"; |
| reg = <3000 100>; |
| interrupts = <2b 2>; |
| interrupt-parent = <&mpic>; |
| dfsrr; |
| |
| rtc@68 { |
| compatible = "dallas,ds1374"; |
| reg = <68>; |
| }; |
| }; |
| |
| i2c@3100 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| cell-index = <1>; |
| compatible = "fsl-i2c"; |
| reg = <3100 100>; |
| interrupts = <2b 2>; |
| interrupt-parent = <&mpic>; |
| dfsrr; |
| }; |
| |
| mdio@24520 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,gianfar-mdio"; |
| reg = <24520 20>; |
| |
| phy0: ethernet-phy@7 { |
| interrupt-parent = <&mpic>; |
| interrupts = <1 1>; |
| reg = <7>; |
| device_type = "ethernet-phy"; |
| }; |
| phy1: ethernet-phy@1 { |
| interrupt-parent = <&mpic>; |
| interrupts = <2 1>; |
| reg = <1>; |
| device_type = "ethernet-phy"; |
| }; |
| phy2: ethernet-phy@2 { |
| interrupt-parent = <&mpic>; |
| interrupts = <1 1>; |
| reg = <2>; |
| device_type = "ethernet-phy"; |
| }; |
| phy3: ethernet-phy@3 { |
| interrupt-parent = <&mpic>; |
| interrupts = <2 1>; |
| reg = <3>; |
| device_type = "ethernet-phy"; |
| }; |
| }; |
| |
| enet0: ethernet@24000 { |
| cell-index = <0>; |
| device_type = "network"; |
| model = "eTSEC"; |
| compatible = "gianfar"; |
| reg = <24000 1000>; |
| local-mac-address = [ 00 00 00 00 00 00 ]; |
| interrupts = <1d 2 1e 2 22 2>; |
| interrupt-parent = <&mpic>; |
| phy-handle = <&phy2>; |
| }; |
| |
| enet1: ethernet@25000 { |
| cell-index = <1>; |
| device_type = "network"; |
| model = "eTSEC"; |
| compatible = "gianfar"; |
| reg = <25000 1000>; |
| local-mac-address = [ 00 00 00 00 00 00 ]; |
| interrupts = <23 2 24 2 28 2>; |
| interrupt-parent = <&mpic>; |
| phy-handle = <&phy3>; |
| }; |
| |
| serial0: serial@4500 { |
| cell-index = <0>; |
| device_type = "serial"; |
| compatible = "ns16550"; |
| reg = <4500 100>; |
| clock-frequency = <0>; |
| interrupts = <2a 2>; |
| interrupt-parent = <&mpic>; |
| }; |
| |
| global-utilities@e0000 { //global utilities block |
| compatible = "fsl,mpc8548-guts"; |
| reg = <e0000 1000>; |
| fsl,has-rstcr; |
| }; |
| |
| serial1: serial@4600 { |
| cell-index = <1>; |
| device_type = "serial"; |
| compatible = "ns16550"; |
| reg = <4600 100>; |
| clock-frequency = <0>; |
| interrupts = <2a 2>; |
| interrupt-parent = <&mpic>; |
| }; |
| |
| crypto@30000 { |
| device_type = "crypto"; |
| model = "SEC2"; |
| compatible = "talitos"; |
| reg = <30000 f000>; |
| interrupts = <2d 2>; |
| interrupt-parent = <&mpic>; |
| num-channels = <4>; |
| channel-fifo-len = <18>; |
| exec-units-mask = <000000fe>; |
| descriptor-types-mask = <012b0ebf>; |
| }; |
| |
| mpic: pic@40000 { |
| clock-frequency = <0>; |
| interrupt-controller; |
| #address-cells = <0>; |
| #interrupt-cells = <2>; |
| reg = <40000 40000>; |
| compatible = "chrp,open-pic"; |
| device_type = "open-pic"; |
| big-endian; |
| }; |
| |
| par_io@e0100 { |
| reg = <e0100 100>; |
| device_type = "par_io"; |
| num-ports = <7>; |
| |
| pio1: ucc_pin@01 { |
| pio-map = < |
| /* port pin dir open_drain assignment has_irq */ |
| 4 0a 1 0 2 0 /* TxD0 */ |
| 4 09 1 0 2 0 /* TxD1 */ |
| 4 08 1 0 2 0 /* TxD2 */ |
| 4 07 1 0 2 0 /* TxD3 */ |
| 4 17 1 0 2 0 /* TxD4 */ |
| 4 16 1 0 2 0 /* TxD5 */ |
| 4 15 1 0 2 0 /* TxD6 */ |
| 4 14 1 0 2 0 /* TxD7 */ |
| 4 0f 2 0 2 0 /* RxD0 */ |
| 4 0e 2 0 2 0 /* RxD1 */ |
| 4 0d 2 0 2 0 /* RxD2 */ |
| 4 0c 2 0 2 0 /* RxD3 */ |
| 4 1d 2 0 2 0 /* RxD4 */ |
| 4 1c 2 0 2 0 /* RxD5 */ |
| 4 1b 2 0 2 0 /* RxD6 */ |
| 4 1a 2 0 2 0 /* RxD7 */ |
| 4 0b 1 0 2 0 /* TX_EN */ |
| 4 18 1 0 2 0 /* TX_ER */ |
| 4 10 2 0 2 0 /* RX_DV */ |
| 4 1e 2 0 2 0 /* RX_ER */ |
| 4 11 2 0 2 0 /* RX_CLK */ |
| 4 13 1 0 2 0 /* GTX_CLK */ |
| 1 1f 2 0 3 0>; /* GTX125 */ |
| }; |
| |
| pio2: ucc_pin@02 { |
| pio-map = < |
| /* port pin dir open_drain assignment has_irq */ |
| 5 0a 1 0 2 0 /* TxD0 */ |
| 5 09 1 0 2 0 /* TxD1 */ |
| 5 08 1 0 2 0 /* TxD2 */ |
| 5 07 1 0 2 0 /* TxD3 */ |
| 5 17 1 0 2 0 /* TxD4 */ |
| 5 16 1 0 2 0 /* TxD5 */ |
| 5 15 1 0 2 0 /* TxD6 */ |
| 5 14 1 0 2 0 /* TxD7 */ |
| 5 0f 2 0 2 0 /* RxD0 */ |
| 5 0e 2 0 2 0 /* RxD1 */ |
| 5 0d 2 0 2 0 /* RxD2 */ |
| 5 0c 2 0 2 0 /* RxD3 */ |
| 5 1d 2 0 2 0 /* RxD4 */ |
| 5 1c 2 0 2 0 /* RxD5 */ |
| 5 1b 2 0 2 0 /* RxD6 */ |
| 5 1a 2 0 2 0 /* RxD7 */ |
| 5 0b 1 0 2 0 /* TX_EN */ |
| 5 18 1 0 2 0 /* TX_ER */ |
| 5 10 2 0 2 0 /* RX_DV */ |
| 5 1e 2 0 2 0 /* RX_ER */ |
| 5 11 2 0 2 0 /* RX_CLK */ |
| 5 13 1 0 2 0 /* GTX_CLK */ |
| 1 1f 2 0 3 0 /* GTX125 */ |
| 4 06 3 0 2 0 /* MDIO */ |
| 4 05 1 0 2 0>; /* MDC */ |
| }; |
| }; |
| }; |
| |
| qe@e0080000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| device_type = "qe"; |
| model = "QE"; |
| ranges = <0 e0080000 00040000>; |
| reg = <e0080000 480>; |
| brg-frequency = <0>; |
| bus-frequency = <179A7B00>; |
| |
| muram@10000 { |
| device_type = "muram"; |
| ranges = <0 00010000 0000c000>; |
| |
| data-only@0{ |
| reg = <0 c000>; |
| }; |
| }; |
| |
| spi@4c0 { |
| device_type = "spi"; |
| compatible = "fsl_spi"; |
| reg = <4c0 40>; |
| interrupts = <2>; |
| interrupt-parent = <&qeic>; |
| mode = "cpu"; |
| }; |
| |
| spi@500 { |
| device_type = "spi"; |
| compatible = "fsl_spi"; |
| reg = <500 40>; |
| interrupts = <1>; |
| interrupt-parent = <&qeic>; |
| mode = "cpu"; |
| }; |
| |
| enet2: ucc@2000 { |
| device_type = "network"; |
| compatible = "ucc_geth"; |
| model = "UCC"; |
| cell-index = <1>; |
| device-id = <1>; |
| reg = <2000 200>; |
| interrupts = <20>; |
| interrupt-parent = <&qeic>; |
| local-mac-address = [ 00 00 00 00 00 00 ]; |
| rx-clock-name = "none"; |
| tx-clock-name = "clk16"; |
| pio-handle = <&pio1>; |
| phy-handle = <&phy0>; |
| phy-connection-type = "rgmii-id"; |
| }; |
| |
| enet3: ucc@3000 { |
| device_type = "network"; |
| compatible = "ucc_geth"; |
| model = "UCC"; |
| cell-index = <2>; |
| device-id = <2>; |
| reg = <3000 200>; |
| interrupts = <21>; |
| interrupt-parent = <&qeic>; |
| local-mac-address = [ 00 00 00 00 00 00 ]; |
| rx-clock-name = "none"; |
| tx-clock-name = "clk16"; |
| pio-handle = <&pio2>; |
| phy-handle = <&phy1>; |
| phy-connection-type = "rgmii-id"; |
| }; |
| |
| mdio@2120 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <2120 18>; |
| compatible = "ucc_geth_phy"; |
| |
| /* These are the same PHYs as on |
| * gianfar's MDIO bus */ |
| qe_phy0: ethernet-phy@07 { |
| interrupt-parent = <&mpic>; |
| interrupts = <1 1>; |
| reg = <7>; |
| device_type = "ethernet-phy"; |
| }; |
| qe_phy1: ethernet-phy@01 { |
| interrupt-parent = <&mpic>; |
| interrupts = <2 1>; |
| reg = <1>; |
| device_type = "ethernet-phy"; |
| }; |
| qe_phy2: ethernet-phy@02 { |
| interrupt-parent = <&mpic>; |
| interrupts = <1 1>; |
| reg = <2>; |
| device_type = "ethernet-phy"; |
| }; |
| qe_phy3: ethernet-phy@03 { |
| interrupt-parent = <&mpic>; |
| interrupts = <2 1>; |
| reg = <3>; |
| device_type = "ethernet-phy"; |
| }; |
| }; |
| |
| qeic: qeic@80 { |
| interrupt-controller; |
| device_type = "qeic"; |
| #address-cells = <0>; |
| #interrupt-cells = <1>; |
| reg = <80 80>; |
| big-endian; |
| interrupts = <2e 2 2e 2>; //high:30 low:30 |
| interrupt-parent = <&mpic>; |
| }; |
| |
| }; |
| |
| pci0: pci@e0008000 { |
| cell-index = <0>; |
| interrupt-map-mask = <f800 0 0 7>; |
| interrupt-map = < |
| /* IDSEL 0x12 AD18 */ |
| 9000 0 0 1 &mpic 5 1 |
| 9000 0 0 2 &mpic 6 1 |
| 9000 0 0 3 &mpic 7 1 |
| 9000 0 0 4 &mpic 4 1 |
| |
| /* IDSEL 0x13 AD19 */ |
| 9800 0 0 1 &mpic 6 1 |
| 9800 0 0 2 &mpic 7 1 |
| 9800 0 0 3 &mpic 4 1 |
| 9800 0 0 4 &mpic 5 1>; |
| |
| interrupt-parent = <&mpic>; |
| interrupts = <18 2>; |
| bus-range = <0 ff>; |
| ranges = <02000000 0 80000000 80000000 0 20000000 |
| 01000000 0 00000000 e2000000 0 00800000>; |
| clock-frequency = <3f940aa>; |
| #interrupt-cells = <1>; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| reg = <e0008000 1000>; |
| compatible = "fsl,mpc8540-pci"; |
| device_type = "pci"; |
| }; |
| |
| /* PCI Express */ |
| pci1: pcie@e000a000 { |
| cell-index = <2>; |
| interrupt-map-mask = <f800 0 0 7>; |
| interrupt-map = < |
| |
| /* IDSEL 0x0 (PEX) */ |
| 00000 0 0 1 &mpic 0 1 |
| 00000 0 0 2 &mpic 1 1 |
| 00000 0 0 3 &mpic 2 1 |
| 00000 0 0 4 &mpic 3 1>; |
| |
| interrupt-parent = <&mpic>; |
| interrupts = <1a 2>; |
| bus-range = <0 ff>; |
| ranges = <02000000 0 a0000000 a0000000 0 10000000 |
| 01000000 0 00000000 e2800000 0 00800000>; |
| clock-frequency = <1fca055>; |
| #interrupt-cells = <1>; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| reg = <e000a000 1000>; |
| compatible = "fsl,mpc8548-pcie"; |
| device_type = "pci"; |
| pcie@0 { |
| reg = <0 0 0 0 0>; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| device_type = "pci"; |
| ranges = <02000000 0 a0000000 |
| 02000000 0 a0000000 |
| 0 10000000 |
| |
| 01000000 0 00000000 |
| 01000000 0 00000000 |
| 0 00800000>; |
| }; |
| }; |
| }; |