| #include <stddef.h> |
| #include <string.h> |
| #include <errno.h> |
| /* _XOPEN_SOURCE is needed for pread, but we define _GNU_SOURCE, which defines |
| * that. |
| */ |
| #include <unistd.h> |
| #include <byteswap.h> |
| #include <sys/time.h> |
| #include <sys/param.h> |
| #include <sys/user.h> |
| |
| #include "os.h" |
| |
| #include "cow.h" |
| #include "cow_sys.h" |
| |
| #define PATH_LEN_V1 256 |
| |
| typedef __u32 time32_t; |
| |
| struct cow_header_v1 { |
| __s32 magic; |
| __s32 version; |
| char backing_file[PATH_LEN_V1]; |
| time32_t mtime; |
| __u64 size; |
| __s32 sectorsize; |
| } __attribute__((packed)); |
| |
| /* Define PATH_LEN_V3 as the usual value of MAXPATHLEN, just hard-code it in |
| * case other systems have different values for MAXPATHLEN. |
| * |
| * The same must hold for V2 - we want file format compatibility, not anything |
| * else. |
| */ |
| #define PATH_LEN_V3 4096 |
| #define PATH_LEN_V2 PATH_LEN_V3 |
| |
| struct cow_header_v2 { |
| __u32 magic; |
| __u32 version; |
| char backing_file[PATH_LEN_V2]; |
| time32_t mtime; |
| __u64 size; |
| __s32 sectorsize; |
| } __attribute__((packed)); |
| |
| /* Changes from V2 - |
| * PATH_LEN_V3 as described above |
| * Explicitly specify field bit lengths for systems with different |
| * lengths for the usual C types. Not sure whether char or |
| * time_t should be changed, this can be changed later without |
| * breaking compatibility |
| * Add alignment field so that different alignments can be used for the |
| * bitmap and data |
| * Add cow_format field to allow for the possibility of different ways |
| * of specifying the COW blocks. For now, the only value is 0, |
| * for the traditional COW bitmap. |
| * Move the backing_file field to the end of the header. This allows |
| * for the possibility of expanding it into the padding required |
| * by the bitmap alignment. |
| * The bitmap and data portions of the file will be aligned as specified |
| * by the alignment field. This is to allow COW files to be |
| * put on devices with restrictions on access alignments, such as |
| * /dev/raw, with a 512 byte alignment restriction. This also |
| * allows the data to be more aligned more strictly than on |
| * sector boundaries. This is needed for ubd-mmap, which needs |
| * the data to be page aligned. |
| * Fixed (finally!) the rounding bug |
| */ |
| |
| /* Until Dec2005, __attribute__((packed)) was left out from the below |
| * definition, leading on 64-bit systems to 4 bytes of padding after mtime, to |
| * align size to 8-byte alignment. This shifted all fields above (no padding |
| * was present on 32-bit, no other padding was added). |
| * |
| * However, this _can be detected_: it means that cow_format (always 0 until |
| * now) is shifted onto the first 4 bytes of backing_file, where it is otherwise |
| * impossible to find 4 zeros. -bb */ |
| |
| struct cow_header_v3 { |
| __u32 magic; |
| __u32 version; |
| __u32 mtime; |
| __u64 size; |
| __u32 sectorsize; |
| __u32 alignment; |
| __u32 cow_format; |
| char backing_file[PATH_LEN_V3]; |
| } __attribute__((packed)); |
| |
| /* This is the broken layout used by some 64-bit binaries. */ |
| struct cow_header_v3_broken { |
| __u32 magic; |
| __u32 version; |
| __s64 mtime; |
| __u64 size; |
| __u32 sectorsize; |
| __u32 alignment; |
| __u32 cow_format; |
| char backing_file[PATH_LEN_V3]; |
| }; |
| |
| /* COW format definitions - for now, we have only the usual COW bitmap */ |
| #define COW_BITMAP 0 |
| |
| union cow_header { |
| struct cow_header_v1 v1; |
| struct cow_header_v2 v2; |
| struct cow_header_v3 v3; |
| struct cow_header_v3_broken v3_b; |
| }; |
| |
| #define COW_MAGIC 0x4f4f4f4d /* MOOO */ |
| #define COW_VERSION 3 |
| |
| #define DIV_ROUND(x, len) (((x) + (len) - 1) / (len)) |
| #define ROUND_UP(x, align) DIV_ROUND(x, align) * (align) |
| |
| void cow_sizes(int version, __u64 size, int sectorsize, int align, |
| int bitmap_offset, unsigned long *bitmap_len_out, |
| int *data_offset_out) |
| { |
| if(version < 3){ |
| *bitmap_len_out = (size + sectorsize - 1) / (8 * sectorsize); |
| |
| *data_offset_out = bitmap_offset + *bitmap_len_out; |
| *data_offset_out = (*data_offset_out + sectorsize - 1) / |
| sectorsize; |
| *data_offset_out *= sectorsize; |
| } |
| else { |
| *bitmap_len_out = DIV_ROUND(size, sectorsize); |
| *bitmap_len_out = DIV_ROUND(*bitmap_len_out, 8); |
| |
| *data_offset_out = bitmap_offset + *bitmap_len_out; |
| *data_offset_out = ROUND_UP(*data_offset_out, align); |
| } |
| } |
| |
| static int absolutize(char *to, int size, char *from) |
| { |
| char save_cwd[256], *slash; |
| int remaining; |
| |
| if(getcwd(save_cwd, sizeof(save_cwd)) == NULL) { |
| cow_printf("absolutize : unable to get cwd - errno = %d\n", |
| errno); |
| return(-1); |
| } |
| slash = strrchr(from, '/'); |
| if(slash != NULL){ |
| *slash = '\0'; |
| if(chdir(from)){ |
| *slash = '/'; |
| cow_printf("absolutize : Can't cd to '%s' - " |
| "errno = %d\n", from, errno); |
| return(-1); |
| } |
| *slash = '/'; |
| if(getcwd(to, size) == NULL){ |
| cow_printf("absolutize : unable to get cwd of '%s' - " |
| "errno = %d\n", from, errno); |
| return(-1); |
| } |
| remaining = size - strlen(to); |
| if(strlen(slash) + 1 > remaining){ |
| cow_printf("absolutize : unable to fit '%s' into %d " |
| "chars\n", from, size); |
| return(-1); |
| } |
| strcat(to, slash); |
| } |
| else { |
| if(strlen(save_cwd) + 1 + strlen(from) + 1 > size){ |
| cow_printf("absolutize : unable to fit '%s' into %d " |
| "chars\n", from, size); |
| return(-1); |
| } |
| strcpy(to, save_cwd); |
| strcat(to, "/"); |
| strcat(to, from); |
| } |
| chdir(save_cwd); |
| return(0); |
| } |
| |
| int write_cow_header(char *cow_file, int fd, char *backing_file, |
| int sectorsize, int alignment, unsigned long long *size) |
| { |
| struct cow_header_v3 *header; |
| unsigned long modtime; |
| int err; |
| |
| err = cow_seek_file(fd, 0); |
| if(err < 0){ |
| cow_printf("write_cow_header - lseek failed, err = %d\n", -err); |
| goto out; |
| } |
| |
| err = -ENOMEM; |
| header = cow_malloc(sizeof(*header)); |
| if(header == NULL){ |
| cow_printf("write_cow_header - failed to allocate COW V3 header\n"); |
| goto out; |
| } |
| header->magic = htonl(COW_MAGIC); |
| header->version = htonl(COW_VERSION); |
| |
| err = -EINVAL; |
| if(strlen(backing_file) > sizeof(header->backing_file) - 1){ |
| /* Below, %zd is for a size_t value */ |
| cow_printf("Backing file name \"%s\" is too long - names are " |
| "limited to %zd characters\n", backing_file, |
| sizeof(header->backing_file) - 1); |
| goto out_free; |
| } |
| |
| if(absolutize(header->backing_file, sizeof(header->backing_file), |
| backing_file)) |
| goto out_free; |
| |
| err = os_file_modtime(header->backing_file, &modtime); |
| if(err < 0){ |
| cow_printf("write_cow_header - backing file '%s' mtime " |
| "request failed, err = %d\n", header->backing_file, |
| -err); |
| goto out_free; |
| } |
| |
| err = cow_file_size(header->backing_file, size); |
| if(err < 0){ |
| cow_printf("write_cow_header - couldn't get size of " |
| "backing file '%s', err = %d\n", |
| header->backing_file, -err); |
| goto out_free; |
| } |
| |
| header->mtime = htonl(modtime); |
| header->size = htonll(*size); |
| header->sectorsize = htonl(sectorsize); |
| header->alignment = htonl(alignment); |
| header->cow_format = COW_BITMAP; |
| |
| err = cow_write_file(fd, header, sizeof(*header)); |
| if(err != sizeof(*header)){ |
| cow_printf("write_cow_header - write of header to " |
| "new COW file '%s' failed, err = %d\n", cow_file, |
| -err); |
| goto out_free; |
| } |
| err = 0; |
| out_free: |
| cow_free(header); |
| out: |
| return(err); |
| } |
| |
| int file_reader(__u64 offset, char *buf, int len, void *arg) |
| { |
| int fd = *((int *) arg); |
| |
| return(pread(fd, buf, len, offset)); |
| } |
| |
| /* XXX Need to sanity-check the values read from the header */ |
| |
| int read_cow_header(int (*reader)(__u64, char *, int, void *), void *arg, |
| __u32 *version_out, char **backing_file_out, |
| time_t *mtime_out, unsigned long long *size_out, |
| int *sectorsize_out, __u32 *align_out, |
| int *bitmap_offset_out) |
| { |
| union cow_header *header; |
| char *file; |
| int err, n; |
| unsigned long version, magic; |
| |
| header = cow_malloc(sizeof(*header)); |
| if(header == NULL){ |
| cow_printf("read_cow_header - Failed to allocate header\n"); |
| return(-ENOMEM); |
| } |
| err = -EINVAL; |
| n = (*reader)(0, (char *) header, sizeof(*header), arg); |
| if(n < offsetof(typeof(header->v1), backing_file)){ |
| cow_printf("read_cow_header - short header\n"); |
| goto out; |
| } |
| |
| magic = header->v1.magic; |
| if(magic == COW_MAGIC) { |
| version = header->v1.version; |
| } |
| else if(magic == ntohl(COW_MAGIC)){ |
| version = ntohl(header->v1.version); |
| } |
| /* No error printed because the non-COW case comes through here */ |
| else goto out; |
| |
| *version_out = version; |
| |
| if(version == 1){ |
| if(n < sizeof(header->v1)){ |
| cow_printf("read_cow_header - failed to read V1 " |
| "header\n"); |
| goto out; |
| } |
| *mtime_out = header->v1.mtime; |
| *size_out = header->v1.size; |
| *sectorsize_out = header->v1.sectorsize; |
| *bitmap_offset_out = sizeof(header->v1); |
| *align_out = *sectorsize_out; |
| file = header->v1.backing_file; |
| } |
| else if(version == 2){ |
| if(n < sizeof(header->v2)){ |
| cow_printf("read_cow_header - failed to read V2 " |
| "header\n"); |
| goto out; |
| } |
| *mtime_out = ntohl(header->v2.mtime); |
| *size_out = ntohll(header->v2.size); |
| *sectorsize_out = ntohl(header->v2.sectorsize); |
| *bitmap_offset_out = sizeof(header->v2); |
| *align_out = *sectorsize_out; |
| file = header->v2.backing_file; |
| } |
| /* This is very subtle - see above at union cow_header definition */ |
| else if(version == 3 && (*((int*)header->v3.backing_file) != 0)){ |
| if(n < sizeof(header->v3)){ |
| cow_printf("read_cow_header - failed to read V3 " |
| "header\n"); |
| goto out; |
| } |
| *mtime_out = ntohl(header->v3.mtime); |
| *size_out = ntohll(header->v3.size); |
| *sectorsize_out = ntohl(header->v3.sectorsize); |
| *align_out = ntohl(header->v3.alignment); |
| if (*align_out == 0) { |
| cow_printf("read_cow_header - invalid COW header, " |
| "align == 0\n"); |
| } |
| *bitmap_offset_out = ROUND_UP(sizeof(header->v3), *align_out); |
| file = header->v3.backing_file; |
| } |
| else if(version == 3){ |
| cow_printf("read_cow_header - broken V3 file with" |
| " 64-bit layout - recovering content.\n"); |
| |
| if(n < sizeof(header->v3_b)){ |
| cow_printf("read_cow_header - failed to read V3 " |
| "header\n"); |
| goto out; |
| } |
| |
| /* this was used until Dec2005 - 64bits are needed to represent |
| * 2038+. I.e. we can safely do this truncating cast. |
| * |
| * Additionally, we must use ntohl() instead of ntohll(), since |
| * the program used to use the former (tested - I got mtime |
| * mismatch "0 vs whatever"). |
| * |
| * Ever heard about bug-to-bug-compatibility ? ;-) */ |
| *mtime_out = (time32_t) ntohl(header->v3_b.mtime); |
| |
| *size_out = ntohll(header->v3_b.size); |
| *sectorsize_out = ntohl(header->v3_b.sectorsize); |
| *align_out = ntohl(header->v3_b.alignment); |
| if (*align_out == 0) { |
| cow_printf("read_cow_header - invalid COW header, " |
| "align == 0\n"); |
| } |
| *bitmap_offset_out = ROUND_UP(sizeof(header->v3_b), *align_out); |
| file = header->v3_b.backing_file; |
| } |
| else { |
| cow_printf("read_cow_header - invalid COW version\n"); |
| goto out; |
| } |
| err = -ENOMEM; |
| *backing_file_out = cow_strdup(file); |
| if(*backing_file_out == NULL){ |
| cow_printf("read_cow_header - failed to allocate backing " |
| "file\n"); |
| goto out; |
| } |
| err = 0; |
| out: |
| cow_free(header); |
| return(err); |
| } |
| |
| int init_cow_file(int fd, char *cow_file, char *backing_file, int sectorsize, |
| int alignment, int *bitmap_offset_out, |
| unsigned long *bitmap_len_out, int *data_offset_out) |
| { |
| unsigned long long size, offset; |
| char zero = 0; |
| int err; |
| |
| err = write_cow_header(cow_file, fd, backing_file, sectorsize, |
| alignment, &size); |
| if(err) |
| goto out; |
| |
| *bitmap_offset_out = ROUND_UP(sizeof(struct cow_header_v3), alignment); |
| cow_sizes(COW_VERSION, size, sectorsize, alignment, *bitmap_offset_out, |
| bitmap_len_out, data_offset_out); |
| |
| offset = *data_offset_out + size - sizeof(zero); |
| err = cow_seek_file(fd, offset); |
| if(err < 0){ |
| cow_printf("cow bitmap lseek failed : err = %d\n", -err); |
| goto out; |
| } |
| |
| /* does not really matter how much we write it is just to set EOF |
| * this also sets the entire COW bitmap |
| * to zero without having to allocate it |
| */ |
| err = cow_write_file(fd, &zero, sizeof(zero)); |
| if(err != sizeof(zero)){ |
| cow_printf("Write of bitmap to new COW file '%s' failed, " |
| "err = %d\n", cow_file, -err); |
| if (err >= 0) |
| err = -EINVAL; |
| goto out; |
| } |
| |
| return(0); |
| |
| out: |
| return(err); |
| } |
| |
| /* |
| * --------------------------------------------------------------------------- |
| * Local variables: |
| * c-file-style: "linux" |
| * End: |
| */ |