Merge branch 'for-linus' of git://gitorious.org/linux-omap-dss2/linux
* 'for-linus' of git://gitorious.org/linux-omap-dss2/linux:
MAINTAINERS: Add OMAP2/3 DSS and OMAPFB maintainer
OMAP: SDP: Enable DSS2 for OMAP3 SDP board
OMAP: DSS2: Taal DSI command mode panel driver
OMAP: DSS2: Add generic and Sharp panel drivers
OMAP: DSS2: omapfb driver
OMAP: DSS2: DSI driver
OMAP: DSS2: SDI driver
OMAP: DSS2: RFBI driver
OMAP: DSS2: Video encoder driver
OMAP: DSS2: DPI driver
OMAP: DSS2: DISPC
OMAP: DSS2: Add more core files
OMAP: DSS2: Display Subsystem Driver core
OMAP: DSS2: Documentation for DSS2
OMAP: Add support for VRFB rotation engine
OMAP: Add VRAM manager
OMAP: OMAPFB: add omapdss device
OMAP: OMAPFB: split omapfb.h
OMAP2: Add funcs for writing SMS_ROT_* registers
diff --git a/Documentation/ABI/stable/sysfs-driver-qla2xxx b/Documentation/ABI/stable/sysfs-driver-qla2xxx
new file mode 100644
index 0000000..9a59d84
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-driver-qla2xxx
@@ -0,0 +1,8 @@
+What: /sys/bus/pci/drivers/qla2xxx/.../devices/*
+Date: September 2009
+Contact: QLogic Linux Driver <linux-driver@qlogic.com>
+Description: qla2xxx-udev.sh currently looks for uevent CHANGE events to
+ signal a firmware-dump has been generated by the driver and is
+ ready for retrieval.
+Users: qla2xxx-udev.sh. Proposed changes should be mailed to
+ linux-driver@qlogic.com
diff --git a/Documentation/ABI/testing/procfs-diskstats b/Documentation/ABI/testing/procfs-diskstats
index 9923390..f91a973 100644
--- a/Documentation/ABI/testing/procfs-diskstats
+++ b/Documentation/ABI/testing/procfs-diskstats
@@ -8,7 +8,7 @@
1 - major number
2 - minor mumber
3 - device name
- 4 - reads completed succesfully
+ 4 - reads completed successfully
5 - reads merged
6 - sectors read
7 - time spent reading (ms)
diff --git a/Documentation/ABI/testing/sysfs-block b/Documentation/ABI/testing/sysfs-block
index 5f3beda..d2f9033 100644
--- a/Documentation/ABI/testing/sysfs-block
+++ b/Documentation/ABI/testing/sysfs-block
@@ -4,7 +4,7 @@
Description:
The /sys/block/<disk>/stat files displays the I/O
statistics of disk <disk>. They contain 11 fields:
- 1 - reads completed succesfully
+ 1 - reads completed successfully
2 - reads merged
3 - sectors read
4 - time spent reading (ms)
diff --git a/Documentation/DMA-mapping.txt b/Documentation/DMA-mapping.txt
index 01f24e9..ecad88d 100644
--- a/Documentation/DMA-mapping.txt
+++ b/Documentation/DMA-mapping.txt
@@ -214,7 +214,7 @@
Here is pseudo-code showing how this might be done:
#define PLAYBACK_ADDRESS_BITS DMA_BIT_MASK(32)
- #define RECORD_ADDRESS_BITS 0x00ffffff
+ #define RECORD_ADDRESS_BITS DMA_BIT_MASK(24)
struct my_sound_card *card;
struct pci_dev *pdev;
@@ -224,14 +224,14 @@
card->playback_enabled = 1;
} else {
card->playback_enabled = 0;
- printk(KERN_WARN "%s: Playback disabled due to DMA limitations.\n",
+ printk(KERN_WARNING "%s: Playback disabled due to DMA limitations.\n",
card->name);
}
if (!pci_set_dma_mask(pdev, RECORD_ADDRESS_BITS)) {
card->record_enabled = 1;
} else {
card->record_enabled = 0;
- printk(KERN_WARN "%s: Record disabled due to DMA limitations.\n",
+ printk(KERN_WARNING "%s: Record disabled due to DMA limitations.\n",
card->name);
}
diff --git a/Documentation/DocBook/device-drivers.tmpl b/Documentation/DocBook/device-drivers.tmpl
index 94a20fe..f9a6e2c 100644
--- a/Documentation/DocBook/device-drivers.tmpl
+++ b/Documentation/DocBook/device-drivers.tmpl
@@ -293,10 +293,23 @@
<chapter id="input_subsystem">
<title>Input Subsystem</title>
+ <sect1><title>Input core</title>
!Iinclude/linux/input.h
!Edrivers/input/input.c
!Edrivers/input/ff-core.c
!Edrivers/input/ff-memless.c
+ </sect1>
+ <sect1><title>Polled input devices</title>
+!Iinclude/linux/input-polldev.h
+!Edrivers/input/input-polldev.c
+ </sect1>
+ <sect1><title>Matrix keyboars/keypads</title>
+!Iinclude/linux/input/matrix_keypad.h
+ </sect1>
+ <sect1><title>Sparse keymap support</title>
+!Iinclude/linux/input/sparse-keymap.h
+!Edrivers/input/sparse-keymap.c
+ </sect1>
</chapter>
<chapter id="spi">
diff --git a/Documentation/DocBook/dvb/dvbapi.xml b/Documentation/DocBook/dvb/dvbapi.xml
index 4fc5b23..63c528f 100644
--- a/Documentation/DocBook/dvb/dvbapi.xml
+++ b/Documentation/DocBook/dvb/dvbapi.xml
@@ -30,6 +30,14 @@
<revhistory>
<!-- Put document revisions here, newest first. -->
<revision>
+ <revnumber>2.0.2</revnumber>
+ <date>2009-10-25</date>
+ <authorinitials>mcc</authorinitials>
+ <revremark>
+ documents FE_SET_FRONTEND_TUNE_MODE and FE_DISHETWORK_SEND_LEGACY_CMD ioctls.
+ </revremark>
+</revision>
+<revision>
<revnumber>2.0.1</revnumber>
<date>2009-09-16</date>
<authorinitials>mcc</authorinitials>
@@ -85,3 +93,8 @@
&sub-examples;
</chapter>
<!-- END OF CHAPTERS -->
+ <appendix id="frontend_h">
+ <title>DVB Frontend Header File</title>
+ &sub-frontend-h;
+ </appendix>
+
diff --git a/Documentation/DocBook/dvb/isdbt.xml b/Documentation/DocBook/dvb/dvbproperty.xml
similarity index 98%
rename from Documentation/DocBook/dvb/isdbt.xml
rename to Documentation/DocBook/dvb/dvbproperty.xml
index 9285522..5f57c7c 100644
--- a/Documentation/DocBook/dvb/isdbt.xml
+++ b/Documentation/DocBook/dvb/dvbproperty.xml
@@ -1,3 +1,6 @@
+<section id="FE_GET_PROPERTY">
+<title>FE_GET_PROPERTY/FE_SET_PROPERTY</title>
+
<section id="isdbt">
<title>ISDB-T frontend</title>
<para>This section describes shortly what are the possible parameters in the Linux
@@ -312,3 +315,4 @@
</section>
</section>
</section>
+</section>
diff --git a/Documentation/DocBook/dvb/frontend.h.xml b/Documentation/DocBook/dvb/frontend.h.xml
new file mode 100644
index 0000000..b99644f
--- /dev/null
+++ b/Documentation/DocBook/dvb/frontend.h.xml
@@ -0,0 +1,415 @@
+<programlisting>
+/*
+ * frontend.h
+ *
+ * Copyright (C) 2000 Marcus Metzler <marcus@convergence.de>
+ * Ralph Metzler <ralph@convergence.de>
+ * Holger Waechtler <holger@convergence.de>
+ * Andre Draszik <ad@convergence.de>
+ * for convergence integrated media GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public License
+ * as published by the Free Software Foundation; either version 2.1
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ */
+
+#ifndef _DVBFRONTEND_H_
+#define _DVBFRONTEND_H_
+
+#include <linux/types.h>
+
+typedef enum fe_type {
+ FE_QPSK,
+ FE_QAM,
+ FE_OFDM,
+ FE_ATSC
+} fe_type_t;
+
+
+typedef enum fe_caps {
+ FE_IS_STUPID = 0,
+ FE_CAN_INVERSION_AUTO = 0x1,
+ FE_CAN_FEC_1_2 = 0x2,
+ FE_CAN_FEC_2_3 = 0x4,
+ FE_CAN_FEC_3_4 = 0x8,
+ FE_CAN_FEC_4_5 = 0x10,
+ FE_CAN_FEC_5_6 = 0x20,
+ FE_CAN_FEC_6_7 = 0x40,
+ FE_CAN_FEC_7_8 = 0x80,
+ FE_CAN_FEC_8_9 = 0x100,
+ FE_CAN_FEC_AUTO = 0x200,
+ FE_CAN_QPSK = 0x400,
+ FE_CAN_QAM_16 = 0x800,
+ FE_CAN_QAM_32 = 0x1000,
+ FE_CAN_QAM_64 = 0x2000,
+ FE_CAN_QAM_128 = 0x4000,
+ FE_CAN_QAM_256 = 0x8000,
+ FE_CAN_QAM_AUTO = 0x10000,
+ FE_CAN_TRANSMISSION_MODE_AUTO = 0x20000,
+ FE_CAN_BANDWIDTH_AUTO = 0x40000,
+ FE_CAN_GUARD_INTERVAL_AUTO = 0x80000,
+ FE_CAN_HIERARCHY_AUTO = 0x100000,
+ FE_CAN_8VSB = 0x200000,
+ FE_CAN_16VSB = 0x400000,
+ FE_HAS_EXTENDED_CAPS = 0x800000, /* We need more bitspace for newer APIs, indicate this. */
+ FE_CAN_2G_MODULATION = 0x10000000, /* frontend supports "2nd generation modulation" (DVB-S2) */
+ FE_NEEDS_BENDING = 0x20000000, /* not supported anymore, don't use (frontend requires frequency bending) */
+ FE_CAN_RECOVER = 0x40000000, /* frontend can recover from a cable unplug automatically */
+ FE_CAN_MUTE_TS = 0x80000000 /* frontend can stop spurious TS data output */
+} fe_caps_t;
+
+
+struct dvb_frontend_info {
+ char name[128];
+ fe_type_t type;
+ __u32 frequency_min;
+ __u32 frequency_max;
+ __u32 frequency_stepsize;
+ __u32 frequency_tolerance;
+ __u32 symbol_rate_min;
+ __u32 symbol_rate_max;
+ __u32 symbol_rate_tolerance; /* ppm */
+ __u32 notifier_delay; /* DEPRECATED */
+ fe_caps_t caps;
+};
+
+
+/**
+ * Check out the DiSEqC bus spec available on http://www.eutelsat.org/ for
+ * the meaning of this struct...
+ */
+struct dvb_diseqc_master_cmd {
+ __u8 msg [6]; /* { framing, address, command, data [3] } */
+ __u8 msg_len; /* valid values are 3...6 */
+};
+
+
+struct dvb_diseqc_slave_reply {
+ __u8 msg [4]; /* { framing, data [3] } */
+ __u8 msg_len; /* valid values are 0...4, 0 means no msg */
+ int timeout; /* return from ioctl after timeout ms with */
+}; /* errorcode when no message was received */
+
+
+typedef enum fe_sec_voltage {
+ SEC_VOLTAGE_13,
+ SEC_VOLTAGE_18,
+ SEC_VOLTAGE_OFF
+} fe_sec_voltage_t;
+
+
+typedef enum fe_sec_tone_mode {
+ SEC_TONE_ON,
+ SEC_TONE_OFF
+} fe_sec_tone_mode_t;
+
+
+typedef enum fe_sec_mini_cmd {
+ SEC_MINI_A,
+ SEC_MINI_B
+} fe_sec_mini_cmd_t;
+
+
+typedef enum fe_status {
+ FE_HAS_SIGNAL = 0x01, /* found something above the noise level */
+ FE_HAS_CARRIER = 0x02, /* found a DVB signal */
+ FE_HAS_VITERBI = 0x04, /* FEC is stable */
+ FE_HAS_SYNC = 0x08, /* found sync bytes */
+ FE_HAS_LOCK = 0x10, /* everything's working... */
+ FE_TIMEDOUT = 0x20, /* no lock within the last ~2 seconds */
+ FE_REINIT = 0x40 /* frontend was reinitialized, */
+} fe_status_t; /* application is recommended to reset */
+ /* DiSEqC, tone and parameters */
+
+typedef enum fe_spectral_inversion {
+ INVERSION_OFF,
+ INVERSION_ON,
+ INVERSION_AUTO
+} fe_spectral_inversion_t;
+
+
+typedef enum fe_code_rate {
+ FEC_NONE = 0,
+ FEC_1_2,
+ FEC_2_3,
+ FEC_3_4,
+ FEC_4_5,
+ FEC_5_6,
+ FEC_6_7,
+ FEC_7_8,
+ FEC_8_9,
+ FEC_AUTO,
+ FEC_3_5,
+ FEC_9_10,
+} fe_code_rate_t;
+
+
+typedef enum fe_modulation {
+ QPSK,
+ QAM_16,
+ QAM_32,
+ QAM_64,
+ QAM_128,
+ QAM_256,
+ QAM_AUTO,
+ VSB_8,
+ VSB_16,
+ PSK_8,
+ APSK_16,
+ APSK_32,
+ DQPSK,
+} fe_modulation_t;
+
+typedef enum fe_transmit_mode {
+ TRANSMISSION_MODE_2K,
+ TRANSMISSION_MODE_8K,
+ TRANSMISSION_MODE_AUTO,
+ TRANSMISSION_MODE_4K
+} fe_transmit_mode_t;
+
+typedef enum fe_bandwidth {
+ BANDWIDTH_8_MHZ,
+ BANDWIDTH_7_MHZ,
+ BANDWIDTH_6_MHZ,
+ BANDWIDTH_AUTO
+} fe_bandwidth_t;
+
+
+typedef enum fe_guard_interval {
+ GUARD_INTERVAL_1_32,
+ GUARD_INTERVAL_1_16,
+ GUARD_INTERVAL_1_8,
+ GUARD_INTERVAL_1_4,
+ GUARD_INTERVAL_AUTO
+} fe_guard_interval_t;
+
+
+typedef enum fe_hierarchy {
+ HIERARCHY_NONE,
+ HIERARCHY_1,
+ HIERARCHY_2,
+ HIERARCHY_4,
+ HIERARCHY_AUTO
+} fe_hierarchy_t;
+
+
+struct dvb_qpsk_parameters {
+ __u32 symbol_rate; /* symbol rate in Symbols per second */
+ fe_code_rate_t fec_inner; /* forward error correction (see above) */
+};
+
+struct dvb_qam_parameters {
+ __u32 symbol_rate; /* symbol rate in Symbols per second */
+ fe_code_rate_t fec_inner; /* forward error correction (see above) */
+ fe_modulation_t modulation; /* modulation type (see above) */
+};
+
+struct dvb_vsb_parameters {
+ fe_modulation_t modulation; /* modulation type (see above) */
+};
+
+struct dvb_ofdm_parameters {
+ fe_bandwidth_t bandwidth;
+ fe_code_rate_t code_rate_HP; /* high priority stream code rate */
+ fe_code_rate_t code_rate_LP; /* low priority stream code rate */
+ fe_modulation_t constellation; /* modulation type (see above) */
+ fe_transmit_mode_t transmission_mode;
+ fe_guard_interval_t guard_interval;
+ fe_hierarchy_t hierarchy_information;
+};
+
+
+struct dvb_frontend_parameters {
+ __u32 frequency; /* (absolute) frequency in Hz for QAM/OFDM/ATSC */
+ /* intermediate frequency in kHz for QPSK */
+ fe_spectral_inversion_t inversion;
+ union {
+ struct dvb_qpsk_parameters qpsk;
+ struct dvb_qam_parameters qam;
+ struct dvb_ofdm_parameters ofdm;
+ struct dvb_vsb_parameters vsb;
+ } u;
+};
+
+
+struct dvb_frontend_event {
+ fe_status_t status;
+ struct dvb_frontend_parameters parameters;
+};
+
+/* S2API Commands */
+#define DTV_UNDEFINED 0
+#define DTV_TUNE 1
+#define DTV_CLEAR 2
+#define DTV_FREQUENCY 3
+#define DTV_MODULATION 4
+#define DTV_BANDWIDTH_HZ 5
+#define DTV_INVERSION 6
+#define DTV_DISEQC_MASTER 7
+#define DTV_SYMBOL_RATE 8
+#define DTV_INNER_FEC 9
+#define DTV_VOLTAGE 10
+#define DTV_TONE 11
+#define DTV_PILOT 12
+#define DTV_ROLLOFF 13
+#define DTV_DISEQC_SLAVE_REPLY 14
+
+/* Basic enumeration set for querying unlimited capabilities */
+#define DTV_FE_CAPABILITY_COUNT 15
+#define DTV_FE_CAPABILITY 16
+#define DTV_DELIVERY_SYSTEM 17
+
+/* ISDB-T and ISDB-Tsb */
+#define DTV_ISDBT_PARTIAL_RECEPTION 18
+#define DTV_ISDBT_SOUND_BROADCASTING 19
+
+#define DTV_ISDBT_SB_SUBCHANNEL_ID 20
+#define DTV_ISDBT_SB_SEGMENT_IDX 21
+#define DTV_ISDBT_SB_SEGMENT_COUNT 22
+
+#define DTV_ISDBT_LAYERA_FEC 23
+#define DTV_ISDBT_LAYERA_MODULATION 24
+#define DTV_ISDBT_LAYERA_SEGMENT_COUNT 25
+#define DTV_ISDBT_LAYERA_TIME_INTERLEAVING 26
+
+#define DTV_ISDBT_LAYERB_FEC 27
+#define DTV_ISDBT_LAYERB_MODULATION 28
+#define DTV_ISDBT_LAYERB_SEGMENT_COUNT 29
+#define DTV_ISDBT_LAYERB_TIME_INTERLEAVING 30
+
+#define DTV_ISDBT_LAYERC_FEC 31
+#define DTV_ISDBT_LAYERC_MODULATION 32
+#define DTV_ISDBT_LAYERC_SEGMENT_COUNT 33
+#define DTV_ISDBT_LAYERC_TIME_INTERLEAVING 34
+
+#define DTV_API_VERSION 35
+
+#define DTV_CODE_RATE_HP 36
+#define DTV_CODE_RATE_LP 37
+#define DTV_GUARD_INTERVAL 38
+#define DTV_TRANSMISSION_MODE 39
+#define DTV_HIERARCHY 40
+
+#define DTV_ISDBT_LAYER_ENABLED 41
+
+#define DTV_ISDBS_TS_ID 42
+
+#define DTV_MAX_COMMAND DTV_ISDBS_TS_ID
+
+typedef enum fe_pilot {
+ PILOT_ON,
+ PILOT_OFF,
+ PILOT_AUTO,
+} fe_pilot_t;
+
+typedef enum fe_rolloff {
+ ROLLOFF_35, /* Implied value in DVB-S, default for DVB-S2 */
+ ROLLOFF_20,
+ ROLLOFF_25,
+ ROLLOFF_AUTO,
+} fe_rolloff_t;
+
+typedef enum fe_delivery_system {
+ SYS_UNDEFINED,
+ SYS_DVBC_ANNEX_AC,
+ SYS_DVBC_ANNEX_B,
+ SYS_DVBT,
+ SYS_DSS,
+ SYS_DVBS,
+ SYS_DVBS2,
+ SYS_DVBH,
+ SYS_ISDBT,
+ SYS_ISDBS,
+ SYS_ISDBC,
+ SYS_ATSC,
+ SYS_ATSCMH,
+ SYS_DMBTH,
+ SYS_CMMB,
+ SYS_DAB,
+} fe_delivery_system_t;
+
+struct dtv_cmds_h {
+ char *name; /* A display name for debugging purposes */
+
+ __u32 cmd; /* A unique ID */
+
+ /* Flags */
+ __u32 set:1; /* Either a set or get property */
+ __u32 buffer:1; /* Does this property use the buffer? */
+ __u32 reserved:30; /* Align */
+};
+
+struct dtv_property {
+ __u32 cmd;
+ __u32 reserved[3];
+ union {
+ __u32 data;
+ struct {
+ __u8 data[32];
+ __u32 len;
+ __u32 reserved1[3];
+ void *reserved2;
+ } buffer;
+ } u;
+ int result;
+} __attribute__ ((packed));
+
+/* num of properties cannot exceed DTV_IOCTL_MAX_MSGS per ioctl */
+#define DTV_IOCTL_MAX_MSGS 64
+
+struct dtv_properties {
+ __u32 num;
+ struct dtv_property *props;
+};
+
+#define <link linkend="FE_GET_PROPERTY">FE_SET_PROPERTY</link> _IOW('o', 82, struct dtv_properties)
+#define <link linkend="FE_GET_PROPERTY">FE_GET_PROPERTY</link> _IOR('o', 83, struct dtv_properties)
+
+
+/**
+ * When set, this flag will disable any zigzagging or other "normal" tuning
+ * behaviour. Additionally, there will be no automatic monitoring of the lock
+ * status, and hence no frontend events will be generated. If a frontend device
+ * is closed, this flag will be automatically turned off when the device is
+ * reopened read-write.
+ */
+#define FE_TUNE_MODE_ONESHOT 0x01
+
+
+#define <link linkend="FE_GET_INFO">FE_GET_INFO</link> _IOR('o', 61, struct dvb_frontend_info)
+
+#define <link linkend="FE_DISEQC_RESET_OVERLOAD">FE_DISEQC_RESET_OVERLOAD</link> _IO('o', 62)
+#define <link linkend="FE_DISEQC_SEND_MASTER_CMD">FE_DISEQC_SEND_MASTER_CMD</link> _IOW('o', 63, struct dvb_diseqc_master_cmd)
+#define <link linkend="FE_DISEQC_RECV_SLAVE_REPLY">FE_DISEQC_RECV_SLAVE_REPLY</link> _IOR('o', 64, struct dvb_diseqc_slave_reply)
+#define <link linkend="FE_DISEQC_SEND_BURST">FE_DISEQC_SEND_BURST</link> _IO('o', 65) /* fe_sec_mini_cmd_t */
+
+#define <link linkend="FE_SET_TONE">FE_SET_TONE</link> _IO('o', 66) /* fe_sec_tone_mode_t */
+#define <link linkend="FE_SET_VOLTAGE">FE_SET_VOLTAGE</link> _IO('o', 67) /* fe_sec_voltage_t */
+#define <link linkend="FE_ENABLE_HIGH_LNB_VOLTAGE">FE_ENABLE_HIGH_LNB_VOLTAGE</link> _IO('o', 68) /* int */
+
+#define <link linkend="FE_READ_STATUS">FE_READ_STATUS</link> _IOR('o', 69, fe_status_t)
+#define <link linkend="FE_READ_BER">FE_READ_BER</link> _IOR('o', 70, __u32)
+#define <link linkend="FE_READ_SIGNAL_STRENGTH">FE_READ_SIGNAL_STRENGTH</link> _IOR('o', 71, __u16)
+#define <link linkend="FE_READ_SNR">FE_READ_SNR</link> _IOR('o', 72, __u16)
+#define <link linkend="FE_READ_UNCORRECTED_BLOCKS">FE_READ_UNCORRECTED_BLOCKS</link> _IOR('o', 73, __u32)
+
+#define <link linkend="FE_SET_FRONTEND">FE_SET_FRONTEND</link> _IOW('o', 76, struct dvb_frontend_parameters)
+#define <link linkend="FE_GET_FRONTEND">FE_GET_FRONTEND</link> _IOR('o', 77, struct dvb_frontend_parameters)
+#define <link linkend="FE_SET_FRONTEND_TUNE_MODE">FE_SET_FRONTEND_TUNE_MODE</link> _IO('o', 81) /* unsigned int */
+#define <link linkend="FE_GET_EVENT">FE_GET_EVENT</link> _IOR('o', 78, struct dvb_frontend_event)
+
+#define <link linkend="FE_DISHNETWORK_SEND_LEGACY_CMD">FE_DISHNETWORK_SEND_LEGACY_CMD</link> _IO('o', 80) /* unsigned int */
+
+#endif /*_DVBFRONTEND_H_*/
+</programlisting>
diff --git a/Documentation/DocBook/dvb/frontend.xml b/Documentation/DocBook/dvb/frontend.xml
index 9d89a7b..300ba1f 100644
--- a/Documentation/DocBook/dvb/frontend.xml
+++ b/Documentation/DocBook/dvb/frontend.xml
@@ -73,7 +73,8 @@
<section id="frontend_info">
<title>frontend information</title>
-<para>Information about the frontend ca be queried with FE_GET_INFO.</para>
+<para>Information about the frontend ca be queried with
+ <link linkend="FE_GET_INFO">FE_GET_INFO</link>.</para>
<programlisting>
struct dvb_frontend_info {
@@ -338,7 +339,7 @@
<entry align="char">
<para>This system call opens a named frontend device (/dev/dvb/adapter0/frontend0)
for subsequent use. Usually the first thing to do after a successful open is to
- find out the frontend type with FE_GET_INFO.</para>
+ find out the frontend type with <link linkend="FE_GET_INFO">FE_GET_INFO</link>.</para>
<para>The device can be opened in read-only mode, which only allows monitoring of
device status and statistics, or read/write mode, which allows any kind of use
(e.g. performing tuning operations.)
@@ -478,7 +479,7 @@
</row></tbody></tgroup></informaltable>
</section>
-<section id="frontend_read_status">
+<section id="FE_READ_STATUS">
<title>FE_READ_STATUS</title>
<para>DESCRIPTION
</para>
@@ -492,7 +493,7 @@
</para>
<informaltable><tgroup cols="1"><tbody><row><entry
align="char">
-<para>int ioctl(int fd, int request = FE_READ_STATUS,
+<para>int ioctl(int fd, int request = <link linkend="FE_READ_STATUS">FE_READ_STATUS</link>,
fe_status_t ⋆status);</para>
</entry>
</row></tbody></tgroup></informaltable>
@@ -511,7 +512,7 @@
<para>int request</para>
</entry><entry
align="char">
-<para>Equals FE_READ_STATUS for this command.</para>
+<para>Equals <link linkend="FE_READ_STATUS">FE_READ_STATUS</link> for this command.</para>
</entry>
</row><row><entry
align="char">
@@ -542,7 +543,7 @@
</row></tbody></tgroup></informaltable>
</section>
-<section id="frontend_read_ber">
+<section id="FE_READ_BER">
<title>FE_READ_BER</title>
<para>DESCRIPTION
</para>
@@ -557,7 +558,7 @@
</para>
<informaltable><tgroup cols="1"><tbody><row><entry
align="char">
-<para>int ioctl(int fd, int request = FE_READ_BER,
+<para>int ioctl(int fd, int request = <link linkend="FE_READ_BER">FE_READ_BER</link>,
uint32_t ⋆ber);</para>
</entry>
</row></tbody></tgroup></informaltable>
@@ -575,7 +576,7 @@
<para>int request</para>
</entry><entry
align="char">
-<para>Equals FE_READ_BER for this command.</para>
+<para>Equals <link linkend="FE_READ_BER">FE_READ_BER</link> for this command.</para>
</entry>
</row><row><entry
align="char">
@@ -619,7 +620,7 @@
</row></tbody></tgroup></informaltable>
</section>
-<section id="frontend_read_snr">
+<section id="FE_READ_SNR">
<title>FE_READ_SNR</title>
<para>DESCRIPTION
@@ -634,7 +635,7 @@
</para>
<informaltable><tgroup cols="1"><tbody><row><entry
align="char">
-<para>int ioctl(int fd, int request = FE_READ_SNR, int16_t
+<para>int ioctl(int fd, int request = <link linkend="FE_READ_SNR">FE_READ_SNR</link>, int16_t
⋆snr);</para>
</entry>
</row></tbody></tgroup></informaltable>
@@ -652,7 +653,7 @@
<para>int request</para>
</entry><entry
align="char">
-<para>Equals FE_READ_SNR for this command.</para>
+<para>Equals <link linkend="FE_READ_SNR">FE_READ_SNR</link> for this command.</para>
</entry>
</row><row><entry
align="char">
@@ -697,7 +698,7 @@
</row></tbody></tgroup></informaltable>
</section>
-<section id="frontend_read_signal_strength">
+<section id="FE_READ_SIGNAL_STRENGTH">
<title>FE_READ_SIGNAL_STRENGTH</title>
<para>DESCRIPTION
</para>
@@ -712,7 +713,7 @@
<informaltable><tgroup cols="1"><tbody><row><entry
align="char">
<para>int ioctl( int fd, int request =
- FE_READ_SIGNAL_STRENGTH, int16_t ⋆strength);</para>
+ <link linkend="FE_READ_SIGNAL_STRENGTH">FE_READ_SIGNAL_STRENGTH</link>, int16_t ⋆strength);</para>
</entry>
</row></tbody></tgroup></informaltable>
@@ -730,7 +731,7 @@
<para>int request</para>
</entry><entry
align="char">
-<para>Equals FE_READ_SIGNAL_STRENGTH for this
+<para>Equals <link linkend="FE_READ_SIGNAL_STRENGTH">FE_READ_SIGNAL_STRENGTH</link> for this
command.</para>
</entry>
</row><row><entry
@@ -775,7 +776,7 @@
</row></tbody></tgroup></informaltable>
</section>
-<section id="frontend_read_ub">
+<section id="FE_READ_UNCORRECTED_BLOCKS">
<title>FE_READ_UNCORRECTED_BLOCKS</title>
<para>DESCRIPTION
</para>
@@ -797,7 +798,7 @@
<informaltable><tgroup cols="1"><tbody><row><entry
align="char">
<para>int ioctl( int fd, int request =
- FE_READ_UNCORRECTED_BLOCKS, uint32_t ⋆ublocks);</para>
+ <link linkend="FE_READ_UNCORRECTED_BLOCKS">FE_READ_UNCORRECTED_BLOCKS</link>, uint32_t ⋆ublocks);</para>
</entry>
</row></tbody></tgroup></informaltable>
<para>PARAMETERS
@@ -814,7 +815,7 @@
<para>int request</para>
</entry><entry
align="char">
-<para>Equals FE_READ_UNCORRECTED_BLOCKS for this
+<para>Equals <link linkend="FE_READ_UNCORRECTED_BLOCKS">FE_READ_UNCORRECTED_BLOCKS</link> for this
command.</para>
</entry>
</row><row><entry
@@ -852,7 +853,7 @@
</row></tbody></tgroup></informaltable>
</section>
-<section id="frontend_set_fe">
+<section id="FE_SET_FRONTEND">
<title>FE_SET_FRONTEND</title>
<para>DESCRIPTION
</para>
@@ -861,8 +862,8 @@
<para>This ioctl call starts a tuning operation using specified parameters. The result
of this call will be successful if the parameters were valid and the tuning could
be initiated. The result of the tuning operation in itself, however, will arrive
- asynchronously as an event (see documentation for FE_GET_EVENT and
- FrontendEvent.) If a new FE_SET_FRONTEND operation is initiated before
+ asynchronously as an event (see documentation for <link linkend="FE_GET_EVENT">FE_GET_EVENT</link> and
+ FrontendEvent.) If a new <link linkend="FE_SET_FRONTEND">FE_SET_FRONTEND</link> operation is initiated before
the previous one was completed, the previous operation will be aborted in favor
of the new one. This command requires read/write access to the device.</para>
</entry>
@@ -872,7 +873,7 @@
</para>
<informaltable><tgroup cols="1"><tbody><row><entry
align="char">
-<para>int ioctl(int fd, int request = FE_SET_FRONTEND,
+<para>int ioctl(int fd, int request = <link linkend="FE_SET_FRONTEND">FE_SET_FRONTEND</link>,
struct dvb_frontend_parameters ⋆p);</para>
</entry>
</row></tbody></tgroup></informaltable>
@@ -890,7 +891,7 @@
<para>int request</para>
</entry><entry
align="char">
-<para>Equals FE_SET_FRONTEND for this command.</para>
+<para>Equals <link linkend="FE_SET_FRONTEND">FE_SET_FRONTEND</link> for this command.</para>
</entry>
</row><row><entry
align="char">
@@ -928,7 +929,7 @@
</row></tbody></tgroup></informaltable>
</section>
-<section id="frontend_get_fe">
+<section id="FE_GET_FRONTEND">
<title>FE_GET_FRONTEND</title>
<para>DESCRIPTION
</para>
@@ -943,7 +944,7 @@
</para>
<informaltable><tgroup cols="1"><tbody><row><entry
align="char">
-<para>int ioctl(int fd, int request = FE_GET_FRONTEND,
+<para>int ioctl(int fd, int request = <link linkend="FE_GET_FRONTEND">FE_GET_FRONTEND</link>,
struct dvb_frontend_parameters ⋆p);</para>
</entry>
</row></tbody></tgroup></informaltable>
@@ -962,7 +963,7 @@
<para>int request</para>
</entry><entry
align="char">
-<para>Equals FE_SET_FRONTEND for this command.</para>
+<para>Equals <link linkend="FE_SET_FRONTEND">FE_SET_FRONTEND</link> for this command.</para>
</entry>
</row><row><entry
align="char">
@@ -1003,7 +1004,7 @@
</section>
-<section id="frontend_get_event">
+<section id="FE_GET_EVENT">
<title>FE_GET_EVENT</title>
<para>DESCRIPTION
</para>
@@ -1024,7 +1025,8 @@
rather small (room for 8 events), the queue must be serviced regularly to avoid
overflow. If an overflow happens, the oldest event is discarded from the queue,
and an error (EOVERFLOW) occurs the next time the queue is read. After
- reporting the error condition in this fashion, subsequent FE_GET_EVENT
+ reporting the error condition in this fashion, subsequent
+ <link linkend="FE_GET_EVENT">FE_GET_EVENT</link>
calls will return events from the queue as usual.</para>
</entry>
</row><row><entry
@@ -1057,7 +1059,7 @@
<para>int request</para>
</entry><entry
align="char">
-<para>Equals FE_GET_EVENT for this command.</para>
+<para>Equals <link linkend="FE_GET_EVENT">FE_GET_EVENT</link> for this command.</para>
</entry>
</row><row><entry
align="char">
@@ -1115,7 +1117,7 @@
</row></tbody></tgroup></informaltable>
</section>
-<section id="frontend_get_info">
+<section id="FE_GET_INFO">
<title>FE_GET_INFO</title>
<para>DESCRIPTION
</para>
@@ -1130,7 +1132,7 @@
<informaltable><tgroup cols="1"><tbody><row><entry
align="char">
-<para> int ioctl(int fd, int request = FE_GET_INFO, struct
+<para> int ioctl(int fd, int request = <link linkend="FE_GET_INFO">FE_GET_INFO</link>, struct
dvb_frontend_info ⋆info);</para>
</entry>
</row></tbody></tgroup></informaltable>
@@ -1149,7 +1151,7 @@
<para>int request</para>
</entry><entry
align="char">
-<para>Equals FE_GET_INFO for this command.</para>
+<para>Equals <link linkend="FE_GET_INFO">FE_GET_INFO</link> for this command.</para>
</entry>
</row><row><entry
align="char">
@@ -1181,7 +1183,7 @@
</row></tbody></tgroup></informaltable>
</section>
-<section id="frontend_diseqc_reset_overload">
+<section id="FE_DISEQC_RESET_OVERLOAD">
<title>FE_DISEQC_RESET_OVERLOAD</title>
<para>DESCRIPTION
</para>
@@ -1199,7 +1201,7 @@
<informaltable><tgroup cols="1"><tbody><row><entry
align="char">
<para>int ioctl(int fd, int request =
- FE_DISEQC_RESET_OVERLOAD);</para>
+ <link linkend="FE_DISEQC_RESET_OVERLOAD">FE_DISEQC_RESET_OVERLOAD</link>);</para>
</entry>
</row></tbody></tgroup></informaltable>
<para>PARAMETERS
@@ -1216,7 +1218,7 @@
<para>int request</para>
</entry><entry
align="char">
-<para>Equals FE_DISEQC_RESET_OVERLOAD for this
+<para>Equals <link linkend="FE_DISEQC_RESET_OVERLOAD">FE_DISEQC_RESET_OVERLOAD</link> for this
command.</para>
</entry>
</row></tbody></tgroup></informaltable>
@@ -1247,7 +1249,7 @@
</row></tbody></tgroup></informaltable>
</section>
-<section id="frontend_diseqc_send_master_cmd">
+<section id="FE_DISEQC_SEND_MASTER_CMD">
<title>FE_DISEQC_SEND_MASTER_CMD</title>
<para>DESCRIPTION
</para>
@@ -1261,7 +1263,7 @@
<informaltable><tgroup cols="1"><tbody><row><entry
align="char">
<para>int ioctl(int fd, int request =
- FE_DISEQC_SEND_MASTER_CMD, struct
+ <link linkend="FE_DISEQC_SEND_MASTER_CMD">FE_DISEQC_SEND_MASTER_CMD</link>, struct
dvb_diseqc_master_cmd ⋆cmd);</para>
</entry>
</row></tbody></tgroup></informaltable>
@@ -1280,7 +1282,7 @@
<para>int request</para>
</entry><entry
align="char">
-<para>Equals FE_DISEQC_SEND_MASTER_CMD for this
+<para>Equals <link linkend="FE_DISEQC_SEND_MASTER_CMD">FE_DISEQC_SEND_MASTER_CMD</link> for this
command.</para>
</entry>
</row><row><entry
@@ -1335,7 +1337,7 @@
</row></tbody></tgroup></informaltable>
</section>
-<section id="frontend_diseqc_recv_slave_reply">
+<section id="FE_DISEQC_RECV_SLAVE_REPLY">
<title>FE_DISEQC_RECV_SLAVE_REPLY</title>
<para>DESCRIPTION
</para>
@@ -1350,7 +1352,7 @@
<informaltable><tgroup cols="1"><tbody><row><entry
align="char">
<para>int ioctl(int fd, int request =
- FE_DISEQC_RECV_SLAVE_REPLY, struct
+ <link linkend="FE_DISEQC_RECV_SLAVE_REPLY">FE_DISEQC_RECV_SLAVE_REPLY</link>, struct
dvb_diseqc_slave_reply ⋆reply);</para>
</entry>
</row></tbody></tgroup></informaltable>
@@ -1369,7 +1371,7 @@
<para>int request</para>
</entry><entry
align="char">
-<para>Equals FE_DISEQC_RECV_SLAVE_REPLY for this
+<para>Equals <link linkend="FE_DISEQC_RECV_SLAVE_REPLY">FE_DISEQC_RECV_SLAVE_REPLY</link> for this
command.</para>
</entry>
</row><row><entry
@@ -1423,7 +1425,7 @@
</row></tbody></tgroup></informaltable>
</section>
-<section id="frontend_diseqc_send_burst">
+<section id="FE_DISEQC_SEND_BURST">
<title>FE_DISEQC_SEND_BURST</title>
<para>DESCRIPTION
</para>
@@ -1438,7 +1440,7 @@
<informaltable><tgroup cols="1"><tbody><row><entry
align="char">
<para>int ioctl(int fd, int request =
- FE_DISEQC_SEND_BURST, fe_sec_mini_cmd_t burst);</para>
+ <link linkend="FE_DISEQC_SEND_BURST">FE_DISEQC_SEND_BURST</link>, fe_sec_mini_cmd_t burst);</para>
</entry>
</row></tbody></tgroup></informaltable>
@@ -1456,7 +1458,7 @@
<para>int request</para>
</entry><entry
align="char">
-<para>Equals FE_DISEQC_SEND_BURST for this command.</para>
+<para>Equals <link linkend="FE_DISEQC_SEND_BURST">FE_DISEQC_SEND_BURST</link> for this command.</para>
</entry>
</row><row><entry
align="char">
@@ -1509,7 +1511,7 @@
</row></tbody></tgroup></informaltable>
</section>
-<section id="frontend_set_tone">
+<section id="FE_SET_TONE">
<title>FE_SET_TONE</title>
<para>DESCRIPTION
</para>
@@ -1523,7 +1525,7 @@
</para>
<informaltable><tgroup cols="1"><tbody><row><entry
align="char">
-<para>int ioctl(int fd, int request = FE_SET_TONE,
+<para>int ioctl(int fd, int request = <link linkend="FE_SET_TONE">FE_SET_TONE</link>,
fe_sec_tone_mode_t tone);</para>
</entry>
</row></tbody></tgroup></informaltable>
@@ -1541,7 +1543,7 @@
<para>int request</para>
</entry><entry
align="char">
-<para>Equals FE_SET_TONE for this command.</para>
+<para>Equals <link linkend="FE_SET_TONE">FE_SET_TONE</link> for this command.</para>
</entry>
</row><row><entry
align="char">
@@ -1592,7 +1594,7 @@
</row></tbody></tgroup></informaltable>
</section>
-<section id="fe_set_voltage">
+<section id="FE_SET_VOLTAGE">
<title>FE_SET_VOLTAGE</title>
<para>DESCRIPTION
</para>
@@ -1606,7 +1608,7 @@
</para>
<informaltable><tgroup cols="1"><tbody><row><entry
align="char">
-<para>int ioctl(int fd, int request = FE_SET_VOLTAGE,
+<para>int ioctl(int fd, int request = <link linkend="FE_SET_VOLTAGE">FE_SET_VOLTAGE</link>,
fe_sec_voltage_t voltage);</para>
</entry>
</row></tbody></tgroup></informaltable>
@@ -1625,7 +1627,7 @@
<para>int request</para>
</entry><entry
align="char">
-<para>Equals FE_SET_VOLTAGE for this command.</para>
+<para>Equals <link linkend="FE_SET_VOLTAGE">FE_SET_VOLTAGE</link> for this command.</para>
</entry>
</row><row><entry
align="char">
@@ -1677,7 +1679,7 @@
</row></tbody></tgroup></informaltable>
</section>
-<section id="frontend_enable_high_lnb_volt">
+<section id="FE_ENABLE_HIGH_LNB_VOLTAGE">
<title>FE_ENABLE_HIGH_LNB_VOLTAGE</title>
<para>DESCRIPTION
</para>
@@ -1694,7 +1696,7 @@
<informaltable><tgroup cols="1"><tbody><row><entry
align="char">
<para>int ioctl(int fd, int request =
- FE_ENABLE_HIGH_LNB_VOLTAGE, int high);</para>
+ <link linkend="FE_ENABLE_HIGH_LNB_VOLTAGE">FE_ENABLE_HIGH_LNB_VOLTAGE</link>, int high);</para>
</entry>
</row></tbody></tgroup></informaltable>
@@ -1712,7 +1714,7 @@
<para>int request</para>
</entry><entry
align="char">
-<para>Equals FE_SET_VOLTAGE for this command.</para>
+<para>Equals <link linkend="FE_SET_VOLTAGE">FE_SET_VOLTAGE</link> for this command.</para>
</entry>
</row><row><entry
align="char">
@@ -1762,5 +1764,82 @@
</entry>
</row></tbody></tgroup></informaltable>
</section>
+
+<section id="FE_SET_FRONTEND_TUNE_MODE">
+<title>FE_SET_FRONTEND_TUNE_MODE</title>
+<para>DESCRIPTION</para>
+<informaltable><tgroup cols="1"><tbody><row>
+<entry align="char">
+<para>Allow setting tuner mode flags to the frontend.</para>
+</entry>
+</row></tbody></tgroup></informaltable>
+
+<para>SYNOPSIS</para>
+<informaltable><tgroup cols="1"><tbody><row>
+<entry align="char">
+<para>int ioctl(int fd, int request =
+<link linkend="FE_SET_FRONTEND_TUNE_MODE">FE_SET_FRONTEND_TUNE_MODE</link>, unsigned int flags);</para>
+</entry>
+</row></tbody></tgroup></informaltable>
+
+<para>PARAMETERS</para>
+<informaltable><tgroup cols="2"><tbody><row>
+<entry align="char">
+ <para>unsigned int flags</para>
+</entry>
+<entry align="char">
+<para>
+FE_TUNE_MODE_ONESHOT When set, this flag will disable any zigzagging or other "normal" tuning behaviour. Additionally, there will be no automatic monitoring of the lock status, and hence no frontend events will be generated. If a frontend device is closed, this flag will be automatically turned off when the device is reopened read-write.
+</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+<para>ERRORS</para>
+<informaltable><tgroup cols="2"><tbody><row>
+<entry align="char"><para>EINVAL</para></entry>
+<entry align="char"><para>Invalid argument.</para></entry>
+ </row></tbody></tgroup></informaltable>
</section>
-&sub-isdbt;
+
+<section id="FE_DISHNETWORK_SEND_LEGACY_CMD">
+ <title>FE_DISHNETWORK_SEND_LEGACY_CMD</title>
+<para>DESCRIPTION</para>
+<informaltable><tgroup cols="1"><tbody><row>
+<entry align="char">
+<para>WARNING: This is a very obscure legacy command, used only at stv0299 driver. Should not be used on newer drivers.</para>
+<para>It provides a non-standard method for selecting Diseqc voltage on the frontend, for Dish Network legacy switches.</para>
+<para>As support for this ioctl were added in 2004, this means that such dishes were already legacy in 2004.</para>
+</entry>
+</row></tbody></tgroup></informaltable>
+
+<para>SYNOPSIS</para>
+<informaltable><tgroup cols="1"><tbody><row>
+<entry align="char">
+<para>int ioctl(int fd, int request =
+ <link linkend="FE_DISHNETWORK_SEND_LEGACY_CMD">FE_DISHNETWORK_SEND_LEGACY_CMD</link>, unsigned long cmd);</para>
+</entry>
+</row></tbody></tgroup></informaltable>
+
+<para>PARAMETERS</para>
+<informaltable><tgroup cols="2"><tbody><row>
+<entry align="char">
+ <para>unsigned long cmd</para>
+</entry>
+<entry align="char">
+<para>
+sends the specified raw cmd to the dish via DISEqC.
+</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+
+<para>ERRORS</para>
+<informaltable><tgroup cols="1"><tbody><row>
+<entry align="char">
+ <para>There are no errors in use for this call</para>
+</entry>
+</row></tbody></tgroup></informaltable>
+</section>
+
+</section>
+
+&sub-dvbproperty;
diff --git a/Documentation/DocBook/genericirq.tmpl b/Documentation/DocBook/genericirq.tmpl
index c671a01..1448b33 100644
--- a/Documentation/DocBook/genericirq.tmpl
+++ b/Documentation/DocBook/genericirq.tmpl
@@ -417,8 +417,8 @@
</para>
<para>
To make use of the split implementation, replace the call to
- __do_IRQ by a call to desc->chip->handle_irq() and associate
- the appropriate handler function to desc->chip->handle_irq().
+ __do_IRQ by a call to desc->handle_irq() and associate
+ the appropriate handler function to desc->handle_irq().
In most cases the generic handler implementations should
be sufficient.
</para>
diff --git a/Documentation/DocBook/kernel-hacking.tmpl b/Documentation/DocBook/kernel-hacking.tmpl
index 992e67e..7b3f493 100644
--- a/Documentation/DocBook/kernel-hacking.tmpl
+++ b/Documentation/DocBook/kernel-hacking.tmpl
@@ -352,7 +352,7 @@
</para>
<programlisting>
-if (signal_pending())
+if (signal_pending(current))
return -ERESTARTSYS;
</programlisting>
diff --git a/Documentation/DocBook/media-entities.tmpl b/Documentation/DocBook/media-entities.tmpl
index 0eb43c1..bb5ab74 100644
--- a/Documentation/DocBook/media-entities.tmpl
+++ b/Documentation/DocBook/media-entities.tmpl
@@ -280,7 +280,7 @@
<!ENTITY sub-v4l2 SYSTEM "v4l/v4l2.xml">
<!ENTITY sub-intro SYSTEM "dvb/intro.xml">
<!ENTITY sub-frontend SYSTEM "dvb/frontend.xml">
-<!ENTITY sub-isdbt SYSTEM "dvb/isdbt.xml">
+<!ENTITY sub-dvbproperty SYSTEM "dvb/dvbproperty.xml">
<!ENTITY sub-demux SYSTEM "dvb/demux.xml">
<!ENTITY sub-video SYSTEM "dvb/video.xml">
<!ENTITY sub-audio SYSTEM "dvb/audio.xml">
@@ -288,6 +288,7 @@
<!ENTITY sub-net SYSTEM "dvb/net.xml">
<!ENTITY sub-kdapi SYSTEM "dvb/kdapi.xml">
<!ENTITY sub-examples SYSTEM "dvb/examples.xml">
+<!ENTITY sub-frontend-h SYSTEM "dvb/frontend.h.xml">
<!ENTITY sub-dvbapi SYSTEM "dvb/dvbapi.xml">
<!ENTITY sub-media SYSTEM "media.xml">
<!ENTITY sub-media-entities SYSTEM "media-entities.tmpl">
diff --git a/Documentation/DocBook/mtdnand.tmpl b/Documentation/DocBook/mtdnand.tmpl
index df0d089..f508a8a 100644
--- a/Documentation/DocBook/mtdnand.tmpl
+++ b/Documentation/DocBook/mtdnand.tmpl
@@ -362,7 +362,7 @@
<sect1 id="Multiple_chip_control">
<title>Multiple chip control</title>
<para>
- The nand driver can control chip arrays. Therefor the
+ The nand driver can control chip arrays. Therefore the
board driver must provide an own select_chip function. This
function must (de)select the requested chip.
The function pointer in the nand_chip structure must
diff --git a/Documentation/DocBook/v4l/controls.xml b/Documentation/DocBook/v4l/controls.xml
index f492acc..f464506 100644
--- a/Documentation/DocBook/v4l/controls.xml
+++ b/Documentation/DocBook/v4l/controls.xml
@@ -281,10 +281,28 @@
<constant>V4L2_COLORFX_SEPIA</constant> (2).</entry>
</row>
<row>
+ <entry><constant>V4L2_CID_ROTATE</constant></entry>
+ <entry>integer</entry>
+ <entry>Rotates the image by specified angle. Common angles are 90,
+ 270 and 180. Rotating the image to 90 and 270 will reverse the height
+ and width of the display window. It is necessary to set the new height and
+ width of the picture using the &VIDIOC-S-FMT; ioctl according to
+ the rotation angle selected.</entry>
+ </row>
+ <row>
+ <entry><constant>V4L2_CID_BG_COLOR</constant></entry>
+ <entry>integer</entry>
+ <entry>Sets the background color on the current output device.
+ Background color needs to be specified in the RGB24 format. The
+ supplied 32 bit value is interpreted as bits 0-7 Red color information,
+ bits 8-15 Green color information, bits 16-23 Blue color
+ information and bits 24-31 must be zero.</entry>
+ </row>
+ <row>
<entry><constant>V4L2_CID_LASTP1</constant></entry>
<entry></entry>
<entry>End of the predefined control IDs (currently
-<constant>V4L2_CID_COLORFX</constant> + 1).</entry>
+<constant>V4L2_CID_BG_COLOR</constant> + 1).</entry>
</row>
<row>
<entry><constant>V4L2_CID_PRIVATE_BASE</constant></entry>
diff --git a/Documentation/DocBook/v4l/pixfmt.xml b/Documentation/DocBook/v4l/pixfmt.xml
index 7d396a3..885968d 100644
--- a/Documentation/DocBook/v4l/pixfmt.xml
+++ b/Documentation/DocBook/v4l/pixfmt.xml
@@ -770,6 +770,11 @@
<entry>'S920'</entry>
<entry>YUV 4:2:0 format of the gspca sn9c20x driver.</entry>
</row>
+ <row id="V4L2-PIX-FMT-STV0680">
+ <entry><constant>V4L2_PIX_FMT_STV0680</constant></entry>
+ <entry>'S680'</entry>
+ <entry>Bayer format of the gspca stv0680 driver.</entry>
+ </row>
<row id="V4L2-PIX-FMT-WNVA">
<entry><constant>V4L2_PIX_FMT_WNVA</constant></entry>
<entry>'WNVA'</entry>
diff --git a/Documentation/DocBook/v4l/videodev2.h.xml b/Documentation/DocBook/v4l/videodev2.h.xml
index 9700206..3e282ed 100644
--- a/Documentation/DocBook/v4l/videodev2.h.xml
+++ b/Documentation/DocBook/v4l/videodev2.h.xml
@@ -363,6 +363,7 @@
#define <link linkend="V4L2-PIX-FMT-OV511">V4L2_PIX_FMT_OV511</link> v4l2_fourcc('O', '5', '1', '1') /* ov511 JPEG */
#define <link linkend="V4L2-PIX-FMT-OV518">V4L2_PIX_FMT_OV518</link> v4l2_fourcc('O', '5', '1', '8') /* ov518 JPEG */
#define <link linkend="V4L2-PIX-FMT-TM6000">V4L2_PIX_FMT_TM6000</link> v4l2_fourcc('T', 'M', '6', '0') /* tm5600/tm60x0 */
+#define <link linkend="V4L2-PIX-FMT-STV0680">V4L2_PIX_FMT_STV0680</link> v4l2_fourcc('S', '6', '8', '0') /* stv0680 bayer */
/*
* F O R M A T E N U M E R A T I O N
@@ -492,7 +493,7 @@
* you do, leave them untouched.
* Inluding less markers will make the
* resulting code smaller, but there will
- * be fewer aplications which can read it.
+ * be fewer applications which can read it.
* The presence of the APP and COM marker
* is influenced by APP_len and COM_len
* ONLY, not by this property! */
@@ -565,6 +566,7 @@
#define V4L2_FBUF_CAP_LOCAL_ALPHA 0x0010
#define V4L2_FBUF_CAP_GLOBAL_ALPHA 0x0020
#define V4L2_FBUF_CAP_LOCAL_INV_ALPHA 0x0040
+#define V4L2_FBUF_CAP_SRC_CHROMAKEY 0x0080
/* Flags for the 'flags' field. */
#define V4L2_FBUF_FLAG_PRIMARY 0x0001
#define V4L2_FBUF_FLAG_OVERLAY 0x0002
@@ -572,6 +574,7 @@
#define V4L2_FBUF_FLAG_LOCAL_ALPHA 0x0008
#define V4L2_FBUF_FLAG_GLOBAL_ALPHA 0x0010
#define V4L2_FBUF_FLAG_LOCAL_INV_ALPHA 0x0020
+#define V4L2_FBUF_FLAG_SRC_CHROMAKEY 0x0040
struct <link linkend="v4l2-clip">v4l2_clip</link> {
struct <link linkend="v4l2-rect">v4l2_rect</link> c;
@@ -914,8 +917,10 @@
#define V4L2_CID_AUTOBRIGHTNESS (V4L2_CID_BASE+32)
#define V4L2_CID_BAND_STOP_FILTER (V4L2_CID_BASE+33)
+#define V4L2_CID_ROTATE (V4L2_CID_BASE+34)
+#define V4L2_CID_BG_COLOR (V4L2_CID_BASE+35)
/* last CID + 1 */
-#define V4L2_CID_LASTP1 (V4L2_CID_BASE+34)
+#define V4L2_CID_LASTP1 (V4L2_CID_BASE+36)
/* MPEG-class control IDs defined by V4L2 */
#define V4L2_CID_MPEG_BASE (V4L2_CTRL_CLASS_MPEG | 0x900)
diff --git a/Documentation/DocBook/v4l/vidioc-g-fbuf.xml b/Documentation/DocBook/v4l/vidioc-g-fbuf.xml
index f701706..e7dda48 100644
--- a/Documentation/DocBook/v4l/vidioc-g-fbuf.xml
+++ b/Documentation/DocBook/v4l/vidioc-g-fbuf.xml
@@ -336,6 +336,13 @@
inverted alpha channel of the framebuffer or VGA signal. Alpha
blending makes no sense for destructive overlays.</entry>
</row>
+ <row>
+ <entry><constant>V4L2_FBUF_CAP_SRC_CHROMAKEY</constant></entry>
+ <entry>0x0080</entry>
+ <entry>The device supports Source Chroma-keying. Framebuffer pixels
+with the chroma-key colors are replaced by video pixels, which is exactly opposite of
+<constant>V4L2_FBUF_CAP_CHROMAKEY</constant></entry>
+ </row>
</tbody>
</tgroup>
</table>
@@ -411,6 +418,16 @@
output = framebuffer pixel * (1 - alpha) + video pixel * alpha. The
actual alpha depth depends on the framebuffer pixel format.</entry>
</row>
+ <row>
+ <entry><constant>V4L2_FBUF_FLAG_SRC_CHROMAKEY</constant></entry>
+ <entry>0x0040</entry>
+ <entry>Use source chroma-keying. The source chroma-key color is
+determined by the <structfield>chromakey</structfield> field of
+&v4l2-window; and negotiated with the &VIDIOC-S-FMT; ioctl, see <xref
+linkend="overlay" /> and <xref linkend="osd" />.
+Both chroma-keying are mutual exclusive to each other, so same
+<structfield>chromakey</structfield> field of &v4l2-window; is being used.</entry>
+ </row>
</tbody>
</tgroup>
</table>
diff --git a/Documentation/DocBook/writing-an-alsa-driver.tmpl b/Documentation/DocBook/writing-an-alsa-driver.tmpl
index 7a2e0e9..0d0f7b4 100644
--- a/Documentation/DocBook/writing-an-alsa-driver.tmpl
+++ b/Documentation/DocBook/writing-an-alsa-driver.tmpl
@@ -5318,7 +5318,7 @@
pages of the given size and map them onto the virtually contiguous
memory. The virtual pointer is addressed in runtime->dma_area.
The physical address (runtime->dma_addr) is set to zero,
- because the buffer is physically non-contigous.
+ because the buffer is physically non-contiguous.
The physical address table is set up in sgbuf->table.
You can get the physical address at a certain offset via
<function>snd_pcm_sgbuf_get_addr()</function>.
diff --git a/Documentation/dvb/README.dvb-usb b/Documentation/dvb/README.dvb-usb
index bf2a9cd..c8238e4 100644
--- a/Documentation/dvb/README.dvb-usb
+++ b/Documentation/dvb/README.dvb-usb
@@ -85,7 +85,7 @@
- moved transfer control (pid filter, fifo control) from usb driver to frontend, it seems
better settled there (added xfer_ops-struct)
- created a common files for frontends (mc/p/mb)
- 2004-09-28 - added support for a new device (Unkown, vendor ID is Hyper-Paltek)
+ 2004-09-28 - added support for a new device (Unknown, vendor ID is Hyper-Paltek)
2004-09-20 - added support for a new device (Compro DVB-U2000), thanks
to Amaury Demol for reporting
- changed usb TS transfer method (several urbs, stopping transfer
diff --git a/Documentation/edac.txt b/Documentation/edac.txt
index 06f8f46..79c5332 100644
--- a/Documentation/edac.txt
+++ b/Documentation/edac.txt
@@ -80,7 +80,7 @@
broken_parity_status
-as is located in /sys/devices/pci<XXX>/0000:XX:YY.Z directorys for
+as is located in /sys/devices/pci<XXX>/0000:XX:YY.Z directories for
PCI devices.
FUTURE HARDWARE SCANNING
@@ -288,9 +288,8 @@
'ue_noinfo_count'
- This attribute file displays the number of UEs that
- have occurred have occurred with no informations as to which DIMM
- slot is having errors.
+ This attribute file displays the number of UEs that have occurred
+ with no information as to which DIMM slot is having errors.
Total Correctable Errors count attribute file:
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 591e944..2a4d779 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -483,3 +483,10 @@
Who: Alok N Kataria <akataria@vmware.com>
----------------------------
+
+What: adt7473 hardware monitoring driver
+When: February 2010
+Why: Obsoleted by the adt7475 driver.
+Who: Jean Delvare <khali@linux-fr.org>
+
+---------------------------
diff --git a/Documentation/filesystems/00-INDEX b/Documentation/filesystems/00-INDEX
index f15621e..7001782 100644
--- a/Documentation/filesystems/00-INDEX
+++ b/Documentation/filesystems/00-INDEX
@@ -36,6 +36,8 @@
- info about directory notification in Linux.
ecryptfs.txt
- docs on eCryptfs: stacked cryptographic filesystem for Linux.
+exofs.txt
+ - info, usage, mount options, design about EXOFS.
ext2.txt
- info, mount options and specifications for the Ext2 filesystem.
ext3.txt
diff --git a/Documentation/filesystems/exofs.txt b/Documentation/filesystems/exofs.txt
index 0ced74c..abd2a9b 100644
--- a/Documentation/filesystems/exofs.txt
+++ b/Documentation/filesystems/exofs.txt
@@ -60,13 +60,13 @@
mkfs.exofs --pid=65536 --format /dev/osd0
- The --format is optional if not specified no OSD_FORMAT will be
- preformed and a clean file system will be created in the specified pid,
+ The --format is optional. If not specified, no OSD_FORMAT will be
+ performed and a clean file system will be created in the specified pid,
in the available space of the target. (Use --format=size_in_meg to limit
the total LUN space available)
- If pid already exist it will be deleted and a new one will be created in it's
- place. Be careful.
+ If pid already exists, it will be deleted and a new one will be created in
+ its place. Be careful.
An exofs lives inside a single OSD partition. You can create multiple exofs
filesystems on the same device using multiple pids.
@@ -81,7 +81,7 @@
7. For reference (See do-exofs example script):
do-exofs start - an example of how to perform the above steps.
- do-exofs stop - an example of how to unmount the file system.
+ do-exofs stop - an example of how to unmount the file system.
do-exofs format - an example of how to format and mkfs a new exofs.
8. Extra compilation flags (uncomment in fs/exofs/Kbuild):
@@ -104,8 +104,8 @@
exofs specific options: Options are separated by commas (,)
pid=<integer> - The partition number to mount/create as
container of the filesystem.
- This option is mandatory
- to=<integer> - Timeout in ticks for a single command
+ This option is mandatory.
+ to=<integer> - Timeout in ticks for a single command.
default is (60 * HZ) [for debugging only]
===============================================================================
@@ -116,7 +116,7 @@
with a special ID (defined in common.h).
Information included in the file system control block is used to fill the
in-memory superblock structure at mount time. This object is created before
- the file system is used by mkexofs.c It contains information such as:
+ the file system is used by mkexofs.c. It contains information such as:
- The file system's magic number
- The next inode number to be allocated
@@ -134,8 +134,8 @@
attributes. This applies to both regular files and other types (directories,
device files, symlinks, etc.).
-* Credentials are generated per object (inode and superblock) when they is
- created in memory (read off disk or created). The credential works for all
+* Credentials are generated per object (inode and superblock) when they are
+ created in memory (read from disk or created). The credential works for all
operations and is used as long as the object remains in memory.
* Async OSD operations are used whenever possible, but the target may execute
@@ -145,7 +145,8 @@
from executing in reverse order:
- The following are handled with the OBJ_CREATED and OBJ_2BCREATED
flags. OBJ_CREATED is set when we know the object exists on the OSD -
- in create's callback function, and when we successfully do a read_inode.
+ in create's callback function, and when we successfully do a
+ read_inode.
OBJ_2BCREATED is set in the beginning of the create function, so we
know that we should wait.
- create/delete: delete should wait until the object is created
diff --git a/Documentation/filesystems/ext4.txt b/Documentation/filesystems/ext4.txt
index 6d94e06..af6885c 100644
--- a/Documentation/filesystems/ext4.txt
+++ b/Documentation/filesystems/ext4.txt
@@ -153,8 +153,8 @@
identified through its new major/minor numbers encoded
in devnum.
-noload Don't load the journal on mounting. Note that
- if the filesystem was not unmounted cleanly,
+norecovery Don't load the journal on mounting. Note that
+noload if the filesystem was not unmounted cleanly,
skipping the journal replay will lead to the
filesystem containing inconsistencies that can
lead to any number of problems.
@@ -353,6 +353,12 @@
system crashes before the delayed allocation
blocks are forced to disk.
+discard Controls whether ext4 should issue discard/TRIM
+nodiscard(*) commands to the underlying block device when
+ blocks are freed. This is useful for SSD devices
+ and sparse/thinly-provisioned LUNs, but it is off
+ by default until sufficient testing has been done.
+
Data Mode
=========
There are 3 different data modes:
diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt
index 4af0018..94b9f20 100644
--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@@ -1089,8 +1089,8 @@
includes (but is not limited to) those created by calls to the fork() and
clone() system calls.
-The "procs_running" line gives the number of processes currently running on
-CPUs.
+The "procs_running" line gives the total number of threads that are
+running or ready to run (i.e., the total number of runnable threads).
The "procs_blocked" line gives the number of processes currently blocked,
waiting for I/O to complete.
diff --git a/Documentation/gpio.txt b/Documentation/gpio.txt
index fa4dc07..e4e7dae 100644
--- a/Documentation/gpio.txt
+++ b/Documentation/gpio.txt
@@ -380,7 +380,7 @@
Most often a gpio_chip is part of an instance-specific structure with state
not exposed by the GPIO interfaces, such as addressing, power management,
-and more. Chips such as codecs will have complex non-GPIO state,
+and more. Chips such as codecs will have complex non-GPIO state.
Any debugfs dump method should normally ignore signals which haven't been
requested as GPIOs. They can use gpiochip_is_requested(), which returns
@@ -531,7 +531,7 @@
This file exists only if the pin can be configured as an
interrupt generating input pin.
-GPIO controllers have paths like /sys/class/gpio/chipchip42/ (for the
+GPIO controllers have paths like /sys/class/gpio/gpiochip42/ (for the
controller implementing GPIOs starting at #42) and have the following
read-only attributes:
diff --git a/Documentation/hwmon/adt7473 b/Documentation/hwmon/adt7473
index 1cbf671..446612b 100644
--- a/Documentation/hwmon/adt7473
+++ b/Documentation/hwmon/adt7473
@@ -9,6 +9,8 @@
Author: Darrick J. Wong
+This driver is depreacted, please use the adt7475 driver instead.
+
Description
-----------
diff --git a/Documentation/hwmon/adt7475 b/Documentation/hwmon/adt7475
index a2b1abe..0502f2b 100644
--- a/Documentation/hwmon/adt7475
+++ b/Documentation/hwmon/adt7475
@@ -1,87 +1,117 @@
-This describes the interface for the ADT7475 driver:
+Kernel driver adt7475
+=====================
-(there are 4 fans, numbered fan1 to fan4):
+Supported chips:
+ * Analog Devices ADT7473
+ Prefix: 'adt7473'
+ Addresses scanned: I2C 0x2C, 0x2D, 0x2E
+ Datasheet: Publicly available at the On Semiconductors website
+ * Analog Devices ADT7475
+ Prefix: 'adt7475'
+ Addresses scanned: I2C 0x2E
+ Datasheet: Publicly available at the On Semiconductors website
+ * Analog Devices ADT7476
+ Prefix: 'adt7476'
+ Addresses scanned: I2C 0x2C, 0x2D, 0x2E
+ Datasheet: Publicly available at the On Semiconductors website
+ * Analog Devices ADT7490
+ Prefix: 'adt7490'
+ Addresses scanned: I2C 0x2C, 0x2D, 0x2E
+ Datasheet: Publicly available at the On Semiconductors website
-fanX_input Read the current speed of the fan (in RPMs)
-fanX_min Read/write the minimum speed of the fan. Dropping
- below this sets an alarm.
+Authors:
+ Jordan Crouse
+ Hans de Goede
+ Darrick J. Wong (documentation)
+ Jean Delvare
-(there are three PWMs, numbered pwm1 to pwm3):
-pwmX Read/write the current duty cycle of the PWM. Writes
- only have effect when auto mode is turned off (see
- below). Range is 0 - 255.
+Description
+-----------
-pwmX_enable Fan speed control method:
+This driver implements support for the Analog Devices ADT7473, ADT7475,
+ADT7476 and ADT7490 chip family. The ADT7473 and ADT7475 differ only in
+minor details. The ADT7476 has additional features, including extra voltage
+measurement inputs and VID support. The ADT7490 also has additional
+features, including extra voltage measurement inputs and PECI support. All
+the supported chips will be collectively designed by the name "ADT747x" in
+the rest of this document.
- 0 - No control (fan at full speed)
- 1 - Manual fan speed control (using pwm[1-*])
- 2 - Automatic fan speed control
+The ADT747x uses the 2-wire interface compatible with the SMBus 2.0
+specification. Using an analog to digital converter it measures three (3)
+temperatures and two (2) or more voltages. It has four (4) 16-bit counters
+for measuring fan speed. There are three (3) PWM outputs that can be used
+to control fan speed.
-pwmX_auto_channels_temp Select which channels affect this PWM
+A sophisticated control system for the PWM outputs is designed into the
+ADT747x that allows fan speed to be adjusted automatically based on any of the
+three temperature sensors. Each PWM output is individually adjustable and
+programmable. Once configured, the ADT747x will adjust the PWM outputs in
+response to the measured temperatures without further host intervention.
+This feature can also be disabled for manual control of the PWM's.
- 1 - TEMP1 controls PWM
- 2 - TEMP2 controls PWM
- 4 - TEMP3 controls PWM
- 6 - TEMP2 and TEMP3 control PWM
- 7 - All three inputs control PWM
+Each of the measured inputs (voltage, temperature, fan speed) has
+corresponding high/low limit values. The ADT747x will signal an ALARM if
+any measured value exceeds either limit.
-pwmX_freq Read/write the PWM frequency in Hz. The number
- should be one of the following:
+The ADT747x samples all inputs continuously. The driver will not read
+the registers more often than once every other second. Further,
+configuration data is only read once per minute.
- 11 Hz
- 14 Hz
- 22 Hz
- 29 Hz
- 35 Hz
- 44 Hz
- 58 Hz
- 88 Hz
+Chip Differences Summary
+------------------------
-pwmX_auto_point1_pwm Read/write the minimum PWM duty cycle in automatic mode
+ADT7473:
+ * 2 voltage inputs
+ * system acoustics optimizations (not implemented)
-pwmX_auto_point2_pwm Read/write the maximum PWM duty cycle in automatic mode
+ADT7475:
+ * 2 voltage inputs
-(there are three temperature settings numbered temp1 to temp3):
+ADT7476:
+ * 5 voltage inputs
+ * VID support
-tempX_input Read the current temperature. The value is in milli
- degrees of Celsius.
+ADT7490:
+ * 6 voltage inputs
+ * 1 Imon input (not implemented)
+ * PECI support (not implemented)
+ * 2 GPIO pins (not implemented)
+ * system acoustics optimizations (not implemented)
-tempX_max Read/write the upper temperature limit - exceeding this
- will cause an alarm.
+Special Features
+----------------
-tempX_min Read/write the lower temperature limit - exceeding this
- will cause an alarm.
+The ADT747x has a 10-bit ADC and can therefore measure temperatures
+with a resolution of 0.25 degree Celsius. Temperature readings can be
+configured either for two's complement format or "Offset 64" format,
+wherein 64 is subtracted from the raw value to get the temperature value.
-tempX_offset Read/write the temperature adjustment offset
+The datasheet is very detailed and describes a procedure for determining
+an optimal configuration for the automatic PWM control.
-tempX_crit Read/write the THERM limit for remote1.
+Fan Speed Control
+-----------------
-tempX_crit_hyst Set the temperature value below crit where the
- fans will stay on - this helps drive the temperature
- low enough so it doesn't stay near the edge and
- cause THERM to keep tripping.
+The driver exposes two trip points per PWM channel.
-tempX_auto_point1_temp Read/write the minimum temperature where the fans will
- turn on in automatic mode.
+point1: Set the PWM speed at the lower temperature bound
+point2: Set the PWM speed at the higher temperature bound
-tempX_auto_point2_temp Read/write the maximum temperature over which the fans
- will run in automatic mode. tempX_auto_point1_temp
- and tempX_auto_point2_temp together define the
- range of automatic control.
+The ADT747x will scale the PWM linearly between the lower and higher PWM
+speed when the temperature is between the two temperature boundaries.
+Temperature boundaries are associated to temperature channels rather than
+PWM outputs, and a given PWM output can be controlled by several temperature
+channels. As a result, the ADT747x may compute more than one PWM value
+for a channel at a given time, in which case the maximum value (fastest
+fan speed) is applied. PWM values range from 0 (off) to 255 (full speed).
-tempX_alarm Read a 1 if the max/min alarm is set
-tempX_fault Read a 1 if either temp1 or temp3 diode has a fault
+Fan speed may be set to maximum when the temperature sensor associated with
+the PWM control exceeds temp#_max.
-(There are two voltage settings, in1 and in2):
+Notes
+-----
-inX_input Read the current voltage on VCC. Value is in
- millivolts.
-
-inX_min read/write the minimum voltage limit.
- Dropping below this causes an alarm.
-
-inX_max read/write the maximum voltage limit.
- Exceeding this causes an alarm.
-
-inX_alarm Read a 1 if the max/min alarm is set.
+The nVidia binary driver presents an ADT7473 chip via an on-card i2c bus.
+Unfortunately, they fail to set the i2c adapter class, so this driver may
+fail to find the chip until the nvidia driver is patched.
diff --git a/Documentation/hwmon/f71882fg b/Documentation/hwmon/f71882fg
index bee4c30..a7952c2 100644
--- a/Documentation/hwmon/f71882fg
+++ b/Documentation/hwmon/f71882fg
@@ -14,6 +14,10 @@
Prefix: 'f71882fg'
Addresses scanned: none, address read from Super I/O config space
Datasheet: Available from the Fintek website
+ * Fintek F71889FG
+ Prefix: 'f71889fg'
+ Addresses scanned: none, address read from Super I/O config space
+ Datasheet: Should become available on the Fintek website soon
* Fintek F8000
Prefix: 'f8000'
Addresses scanned: none, address read from Super I/O config space
@@ -51,6 +55,12 @@
motherboard, so the driver assumes that the BIOS set the method
properly.
+Note that the lowest numbered temperature zone trip point corresponds to
+to the border between the highest and one but highest temperature zones, and
+vica versa. So the temperature zone trip points 1-4 (or 1-2) go from high temp
+to low temp! This is how things are implemented in the IC, and the driver
+mimicks this.
+
There are 2 modes to specify the speed of the fan, PWM duty cycle (or DC
voltage) mode, where 0-100% duty cycle (0-100% of 12V) is specified. And RPM
mode where the actual RPM of the fan (as measured) is controlled and the speed
diff --git a/Documentation/hwmon/it87 b/Documentation/hwmon/it87
index 659315d..f9ba96c 100644
--- a/Documentation/hwmon/it87
+++ b/Documentation/hwmon/it87
@@ -86,7 +86,6 @@
the Vcore voltage of the processor. The early IT8712F have 5 VID pins,
the IT8716F and late IT8712F have 6. They are shared with other functions
though, so the functionality may not be available on a given system.
-The driver dumbly assume it is there.
The IT8718F and IT8720F also features VID inputs (up to 8 pins) but the value
is stored in the Super-I/O configuration space. Due to technical limitations,
diff --git a/Documentation/hwmon/mc13783-adc b/Documentation/hwmon/mc13783-adc
new file mode 100644
index 0000000..044531a
--- /dev/null
+++ b/Documentation/hwmon/mc13783-adc
@@ -0,0 +1,50 @@
+Kernel driver mc13783-adc
+=========================
+
+Supported chips:
+ * Freescale Atlas MC13783
+ Prefix: 'mc13783_adc'
+ Datasheet: http://www.freescale.com/files/rf_if/doc/data_sheet/MC13783.pdf?fsrch=1
+
+Authors:
+ Sascha Hauer <s.hauer@pengutronix.de>
+ Luotao Fu <l.fu@pengutronix.de>
+
+Description
+-----------
+
+The Freescale MC13783 is a Power Management and Audio Circuit. Among
+other things it contains a 10-bit A/D converter. The converter has 16
+channels which can be used in different modes.
+The A/D converter has a resolution of 2.25mV. Channels 0-4 have
+a dedicated meaning with chip internal scaling applied. Channels 5-7
+can be used as general purpose inputs or alternatively in a dedicated
+mode. Channels 12-15 are occupied by the touchscreen if it's active.
+
+Currently the driver only supports channels 2 and 5-15 with no alternative
+modes for channels 5-7.
+
+See this table for the meaning of the different channels and their chip
+internal scaling:
+
+Channel Signal Input Range Scaling
+-------------------------------------------------------------------------------
+0 Battery Voltage (BATT) 2.50 - 4.65V -2.40V
+1 Battery Current (BATT - BATTISNS) -50 - 50 mV x20
+2 Application Supply (BP) 2.50 - 4.65V -2.40V
+3 Charger Voltage (CHRGRAW) 0 - 10V / /5
+ 0 - 20V /10
+4 Charger Current (CHRGISNSP-CHRGISNSN) -0.25V - 0.25V x4
+5 General Purpose ADIN5 / Battery Pack Thermistor 0 - 2.30V No
+6 General Purpose ADIN6 / Backup Voltage (LICELL) 0 - 2.30V / No /
+ 1.50 - 3.50V -1.20V
+7 General Purpose ADIN7 / UID / Die Temperature 0 - 2.30V / No /
+ 0 - 2.55V / x0.9 / No
+8 General Purpose ADIN8 0 - 2.30V No
+9 General Purpose ADIN9 0 - 2.30V No
+10 General Purpose ADIN10 0 - 2.30V No
+11 General Purpose ADIN11 0 - 2.30V No
+12 General Purpose TSX1 / Touchscreen X-plate 1 0 - 2.30V No
+13 General Purpose TSX2 / Touchscreen X-plate 2 0 - 2.30V No
+14 General Purpose TSY1 / Touchscreen Y-plate 1 0 - 2.30V No
+15 General Purpose TSY2 / Touchscreen Y-plate 2 0 - 2.30V No
diff --git a/Documentation/hwmon/sysfs-interface b/Documentation/hwmon/sysfs-interface
index 82def88..3de6b0b 100644
--- a/Documentation/hwmon/sysfs-interface
+++ b/Documentation/hwmon/sysfs-interface
@@ -225,8 +225,6 @@
to PWM output channels.
RW
-OR
-
temp[1-*]_auto_point[1-*]_pwm
temp[1-*]_auto_point[1-*]_temp
temp[1-*]_auto_point[1-*]_temp_hyst
@@ -235,6 +233,15 @@
to temperature channels.
RW
+There is a third case where trip points are associated to both PWM output
+channels and temperature channels: the PWM values are associated to PWM
+output channels while the temperature values are associated to temperature
+channels. In that case, the result is determined by the mapping between
+temperature inputs and PWM outputs. When several temperature inputs are
+mapped to a given PWM output, this leads to several candidate PWM values.
+The actual result is up to the chip, but in general the highest candidate
+value (fastest fan speed) wins.
+
****************
* Temperatures *
diff --git a/Documentation/hwmon/w83627hf b/Documentation/hwmon/w83627hf
index 6ee36db..44dd2bc 100644
--- a/Documentation/hwmon/w83627hf
+++ b/Documentation/hwmon/w83627hf
@@ -32,8 +32,6 @@
Module Parameters
-----------------
-* force_addr: int
- Initialize the ISA address of the sensors
* force_i2c: int
Initialize the I2C address of the sensors
* init: int
@@ -70,3 +68,30 @@
For further information on this driver see the w83781d driver documentation.
[1] http://www.lm-sensors.org/browser/lm-sensors/trunk/doc/vid
+
+Forcing the address
+-------------------
+
+The driver used to have a module parameter named force_addr, which could
+be used to force the base I/O address of the hardware monitoring block.
+This was meant as a workaround for mainboards with a broken BIOS. This
+module parameter is gone for technical reasons. If you need this feature,
+you can obtain the same result by using the isaset tool (part of
+lm-sensors) before loading the driver:
+
+# Enter the Super I/O config space
+isaset -y -f 0x2e 0x87
+isaset -y -f 0x2e 0x87
+
+# Select the hwmon logical device
+isaset -y 0x2e 0x2f 0x07 0x0b
+
+# Set the base I/O address (to 0x290 in this example)
+isaset -y 0x2e 0x2f 0x60 0x02
+isaset -y 0x2e 0x2f 0x61 0x90
+
+# Exit the Super-I/O config space
+isaset -y -f 0x2e 0xaa
+
+The above sequence assumes a Super-I/O config space at 0x2e/0x2f, but
+0x4e/0x4f is also possible.
diff --git a/Documentation/lguest/lguest.c b/Documentation/lguest/lguest.c
index 098de5b..4220851 100644
--- a/Documentation/lguest/lguest.c
+++ b/Documentation/lguest/lguest.c
@@ -304,7 +304,7 @@
addr = mmap(NULL, getpagesize() * num,
PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE, fd, 0);
if (addr == MAP_FAILED)
- err(1, "Mmaping %u pages of /dev/zero", num);
+ err(1, "Mmapping %u pages of /dev/zero", num);
/*
* One neat mmap feature is that you can close the fd, and it
diff --git a/Documentation/c2port.txt b/Documentation/misc-devices/c2port.txt
similarity index 100%
rename from Documentation/c2port.txt
rename to Documentation/misc-devices/c2port.txt
diff --git a/Documentation/ics932s401 b/Documentation/misc-devices/ics932s401
similarity index 100%
rename from Documentation/ics932s401
rename to Documentation/misc-devices/ics932s401
diff --git a/Documentation/oops-tracing.txt b/Documentation/oops-tracing.txt
index b152e81..c10c022 100644
--- a/Documentation/oops-tracing.txt
+++ b/Documentation/oops-tracing.txt
@@ -257,6 +257,8 @@
10: 'W' if a warning has previously been issued by the kernel.
+ 11: 'C' if a staging driver has been loaded.
+
The primary reason for the 'Tainted: ' string is to tell kernel
debuggers if this is a clean kernel or if anything unusual has
occurred. Tainting is permanent: even if an offending module is
diff --git a/Documentation/power/regulator/consumer.txt b/Documentation/power/regulator/consumer.txt
index 5f83fd2..cdebb51 100644
--- a/Documentation/power/regulator/consumer.txt
+++ b/Documentation/power/regulator/consumer.txt
@@ -104,7 +104,7 @@
Consumers can control their supply current limit by calling :-
-int regulator_set_current_limit(regulator, min_uV, max_uV);
+int regulator_set_current_limit(regulator, min_uA, max_uA);
Where min_uA and max_uA are the minimum and maximum acceptable current limit in
microamps.
diff --git a/Documentation/scsi/ChangeLog.megaraid_sas b/Documentation/scsi/ChangeLog.megaraid_sas
index c851ef4..17ffa06 100644
--- a/Documentation/scsi/ChangeLog.megaraid_sas
+++ b/Documentation/scsi/ChangeLog.megaraid_sas
@@ -1,3 +1,65 @@
+1 Release Date : Tues. July 28, 2009 10:12:45 PST 2009 -
+ (emaild-id:megaraidlinux@lsi.com)
+ Bo Yang
+
+2 Current Version : 00.00.04.12
+3 Older Version : 00.00.04.10
+
+1. Change the AEN sys PD update from scsi_scan to
+ scsi_add_device and scsi_remove_device.
+2. Takeoff the debug print-out in aen_polling routine.
+
+1 Release Date : Thur. July 02, 2009 10:12:45 PST 2009 -
+ (emaild-id:megaraidlinux@lsi.com)
+ Bo Yang
+
+2 Current Version : 00.00.04.10
+3 Older Version : 00.00.04.08
+
+1. Add the 3 mins timeout during the controller initialize.
+2. Add the fix for 64bit sense date errors.
+
+1 Release Date : Tues. May 05, 2009 10:12:45 PST 2009 -
+ (emaild-id:megaraidlinux@lsi.com)
+ Bo Yang
+
+2 Current Version : 00.00.04.08
+3 Older Version : 00.00.04.06
+
+1. Add the fix of pending in FW after deleted the logic drives.
+2. Add the fix of deallocating memory after get pdlist.
+
+1 Release Date : Tues. March 26, 2009 10:12:45 PST 2009 -
+ (emaild-id:megaraidlinux@lsi.com)
+ Bo Yang
+
+2 Current Version : 00.00.04.06
+3 Older Version : 00.00.04.04
+
+1. Add the fix of the driver cmd empty fix of the driver cmd empty.
+2. Add the fix of the driver MSM AEN CMD cause the system slow.
+
+1 Release Date : Tues. March 03, 2009 10:12:45 PST 2009 -
+ (emaild-id:megaraidlinux@lsi.com)
+ Bo Yang
+
+2 Current Version : 00.00.04.04
+3 Older Version : 00.00.04.01
+
+1. Add the Tape drive fix to the driver: If the command is for
+ the tape device, set the pthru timeout to the os layer timeout value.
+
+2. Add Poll_wait mechanism to Gen-2 Linux driv.
+ In the aen handler, driver needs to wakeup poll handler similar to
+ the way it raises SIGIO.
+
+3. Add new controller new SAS2 support to the driver.
+
+4. Report the unconfigured PD (system PD) to OS.
+
+5. Add the IEEE SGL support to the driver
+
+6. Reasign the Application cmds to SAS2 controller
1 Release Date : Thur.July. 24 11:41:51 PST 2008 -
(emaild-id:megaraidlinux@lsi.com)
@@ -185,7 +247,7 @@
Disks are exposed with WCE=1. User is advised to enable Write Back
mode only when the controller has battery backup. At this time
Synhronize cache is not supported by the FW. Driver will short-cycle
- the cmd and return sucess without sending down to FW.
+ the cmd and return success without sending down to FW.
1 Release Date : Sun Jan. 14 11:21:32 PDT 2007 -
Sumant Patro <Sumant.Patro@lsil.com>/Bo Yang
diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt
index 9000cd8..e93afff 100644
--- a/Documentation/sound/alsa/HD-Audio-Models.txt
+++ b/Documentation/sound/alsa/HD-Audio-Models.txt
@@ -126,6 +126,7 @@
mb5 Macbook 5,1
mbp3 Macbook Pro rev3
imac24 iMac 24'' with jack detection
+ imac91 iMac 9,1
w2jc ASUS W2JC
3stack-2ch-dig 3-jack with SPDIF I/O (ALC883)
alc883-6stack-dig 6-jack digital with SPDIF I/O (ALC883)
diff --git a/Documentation/sound/alsa/HD-Audio.txt b/Documentation/sound/alsa/HD-Audio.txt
index 7b8a5f9..6325bec 100644
--- a/Documentation/sound/alsa/HD-Audio.txt
+++ b/Documentation/sound/alsa/HD-Audio.txt
@@ -624,11 +624,13 @@
the widget information and adjusting the amp values, as well as the
proc-compatible output.
-The hda-analyzer is a part of alsa.git repository in
-alsa-project.org:
+The hda-analyzer:
- http://git.alsa-project.org/?p=alsa.git;a=tree;f=hda-analyzer
+is a part of alsa.git repository in alsa-project.org:
+
+- git://git.alsa-project.org/alsa.git
Codecgraph
~~~~~~~~~~
diff --git a/Documentation/spi/spi-summary b/Documentation/spi/spi-summary
index deab51d..4884cb3 100644
--- a/Documentation/spi/spi-summary
+++ b/Documentation/spi/spi-summary
@@ -538,7 +538,7 @@
The bulk of the driver will be managing the I/O queue fed by transfer().
That queue could be purely conceptual. For example, a driver used only
-for low-frequency sensor acess might be fine using synchronous PIO.
+for low-frequency sensor access might be fine using synchronous PIO.
But the queue will probably be very real, using message->queue, PIO,
often DMA (especially if the root filesystem is in SPI flash), and
diff --git a/Documentation/sysctl/kernel.txt b/Documentation/sysctl/kernel.txt
index a028b92..8f7a0e7 100644
--- a/Documentation/sysctl/kernel.txt
+++ b/Documentation/sysctl/kernel.txt
@@ -139,9 +139,9 @@
core_pipe_limit:
This sysctl is only applicable when core_pattern is configured to pipe core
-files to user space helper a (when the first character of core_pattern is a '|',
+files to a user space helper (when the first character of core_pattern is a '|',
see above). When collecting cores via a pipe to an application, it is
-occasionally usefull for the collecting application to gather data about the
+occasionally useful for the collecting application to gather data about the
crashing process from its /proc/pid directory. In order to do this safely, the
kernel must wait for the collecting process to exit, so as not to remove the
crashing processes proc files prematurely. This in turn creates the possibility
@@ -152,7 +152,7 @@
processes above that value are noted via the kernel log and their cores are
skipped. 0 is a special value, indicating that unlimited processes may be
captured in parallel, but that no waiting will take place (i.e. the collecting
-process is not guaranteed access to /proc/<crahing pid>/). This value defaults
+process is not guaranteed access to /proc/<crashing pid>/). This value defaults
to 0.
==============================================================
diff --git a/Documentation/sysctl/vm.txt b/Documentation/sysctl/vm.txt
index a6e360d..fc5790d 100644
--- a/Documentation/sysctl/vm.txt
+++ b/Documentation/sysctl/vm.txt
@@ -370,7 +370,7 @@
mmap_min_addr
This file indicates the amount of address space which a user process will
-be restricted from mmaping. Since kernel null dereference bugs could
+be restricted from mmapping. Since kernel null dereference bugs could
accidentally operate based on the information in the first couple of pages
of memory userspace processes should not be allowed to write to them. By
default this value is set to 0 and no protections will be enforced by the
diff --git a/Documentation/timers/hpet.txt b/Documentation/timers/hpet.txt
index 04763a3..16d25e6 100644
--- a/Documentation/timers/hpet.txt
+++ b/Documentation/timers/hpet.txt
@@ -3,7 +3,7 @@
The High Precision Event Timer (HPET) hardware follows a specification
by Intel and Microsoft which can be found at
- http://www.intel.com/technology/architecture/hpetspec.htm
+ http://www.intel.com/hardwaredesign/hpetspec_1.pdf
Each HPET has one fixed-rate counter (at 10+ MHz, hence "High Precision")
and up to 32 comparators. Normally three or more comparators are provided,
diff --git a/Documentation/video4linux/CARDLIST.cx23885 b/Documentation/video4linux/CARDLIST.cx23885
index 5f33d84..7539e8f 100644
--- a/Documentation/video4linux/CARDLIST.cx23885
+++ b/Documentation/video4linux/CARDLIST.cx23885
@@ -24,3 +24,5 @@
23 -> Magic-Pro ProHDTV Extreme 2 [14f1:8657]
24 -> Hauppauge WinTV-HVR1850 [0070:8541]
25 -> Compro VideoMate E800 [1858:e800]
+ 26 -> Hauppauge WinTV-HVR1290 [0070:8551]
+ 27 -> Mygica X8558 PRO DMB-TH [14f1:8578]
diff --git a/Documentation/video4linux/CARDLIST.cx88 b/Documentation/video4linux/CARDLIST.cx88
index 3385f8b..7ec3c4e 100644
--- a/Documentation/video4linux/CARDLIST.cx88
+++ b/Documentation/video4linux/CARDLIST.cx88
@@ -81,3 +81,4 @@
80 -> Hauppauge WinTV-IR Only [0070:9290]
81 -> Leadtek WinFast DTV1800 Hybrid [107d:6654]
82 -> WinFast DTV2000 H rev. J [107d:6f2b]
+ 83 -> Prof 7301 DVB-S/S2 [b034:3034]
diff --git a/Documentation/video4linux/CARDLIST.em28xx b/Documentation/video4linux/CARDLIST.em28xx
index b8afef4..0c166ff 100644
--- a/Documentation/video4linux/CARDLIST.em28xx
+++ b/Documentation/video4linux/CARDLIST.em28xx
@@ -1,5 +1,5 @@
0 -> Unknown EM2800 video grabber (em2800) [eb1a:2800]
- 1 -> Unknown EM2750/28xx video grabber (em2820/em2840) [eb1a:2710,eb1a:2820,eb1a:2821,eb1a:2860,eb1a:2861,eb1a:2870,eb1a:2881,eb1a:2883,eb1a:2868]
+ 1 -> Unknown EM2750/28xx video grabber (em2820/em2840) [eb1a:2710,eb1a:2820,eb1a:2821,eb1a:2860,eb1a:2861,eb1a:2862,eb1a:2870,eb1a:2881,eb1a:2883,eb1a:2868]
2 -> Terratec Cinergy 250 USB (em2820/em2840) [0ccd:0036]
3 -> Pinnacle PCTV USB 2 (em2820/em2840) [2304:0208]
4 -> Hauppauge WinTV USB 2 (em2820/em2840) [2040:4200,2040:4201]
@@ -69,3 +69,4 @@
71 -> Silvercrest Webcam 1.3mpix (em2820/em2840)
72 -> Gadmei UTV330+ (em2861)
73 -> Reddo DVB-C USB TV Box (em2870)
+ 74 -> Actionmaster/LinXcel/Digitus VC211A (em2800)
diff --git a/Documentation/video4linux/CARDLIST.saa7134 b/Documentation/video4linux/CARDLIST.saa7134
index 2620d60..fce1e7e 100644
--- a/Documentation/video4linux/CARDLIST.saa7134
+++ b/Documentation/video4linux/CARDLIST.saa7134
@@ -172,3 +172,5 @@
171 -> Beholder BeholdTV X7 [5ace:7595]
172 -> RoverMedia TV Link Pro FM [19d1:0138]
173 -> Zolid Hybrid TV Tuner PCI [1131:2004]
+174 -> Asus Europa Hybrid OEM [1043:4847]
+175 -> Leadtek Winfast DTV1000S [107d:6655]
diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt
index 3f61825..319d983 100644
--- a/Documentation/video4linux/gspca.txt
+++ b/Documentation/video4linux/gspca.txt
@@ -6,7 +6,8 @@
xxxx vend:prod
----
-spca501 0000:0000 MystFromOri Unknow Camera
+spca501 0000:0000 MystFromOri Unknown Camera
+spca508 0130:0130 Clone Digital Webcam 11043
m5602 0402:5602 ALi Video Camera Controller
spca501 040a:0002 Kodak DVC-325
spca500 040a:0300 Kodak EZ200
@@ -37,6 +38,7 @@
ov519 041e:4060 Creative Live! VISTA VF0350
ov519 041e:4061 Creative Live! VISTA VF0400
ov519 041e:4064 Creative Live! VISTA VF0420
+ov519 041e:4067 Creative Live! Cam Video IM (VF0350)
ov519 041e:4068 Creative Live! VISTA VF0470
spca561 0458:7004 Genius VideoCAM Express V2
sunplus 0458:7006 Genius Dsc 1.3 Smart
@@ -68,12 +70,12 @@
zc3xx 046d:08a6 Logitech QCim
zc3xx 046d:08a7 Logitech QuickCam Image
zc3xx 046d:08a9 Logitech Notebook Deluxe
-zc3xx 046d:08aa Labtec Webcam Notebook
+zc3xx 046d:08aa Labtec Webcam Notebook
zc3xx 046d:08ac Logitech QuickCam Cool
zc3xx 046d:08ad Logitech QCCommunicate STX
zc3xx 046d:08ae Logitech QuickCam for Notebooks
zc3xx 046d:08af Logitech QuickCam Cool
-zc3xx 046d:08b9 Logitech QC IM ???
+zc3xx 046d:08b9 Logitech QuickCam Express
zc3xx 046d:08d7 Logitech QCam STX
zc3xx 046d:08d9 Logitech QuickCam IM/Connect
zc3xx 046d:08d8 Logitech Notebook Deluxe
@@ -82,7 +84,7 @@
spca500 046d:0900 Logitech Inc. ClickSmart 310
spca500 046d:0901 Logitech Inc. ClickSmart 510
sunplus 046d:0905 Logitech ClickSmart 820
-tv8532 046d:0920 QC Express
+tv8532 046d:0920 Logitech QuickCam Express
tv8532 046d:0921 Labtec Webcam
spca561 046d:0928 Logitech QC Express Etch2
spca561 046d:0929 Labtec Webcam Elch2
@@ -91,7 +93,7 @@
spca561 046d:092c Logitech QC chat Elch2
spca561 046d:092d Logitech QC Elch2
spca561 046d:092e Logitech QC Elch2
-spca561 046d:092f Logitech QuickCam Express Plus
+spca561 046d:092f Logitech QuickCam Express Plus
sunplus 046d:0960 Logitech ClickSmart 420
sunplus 0471:0322 Philips DMVC1300K
zc3xx 0471:0325 Philips SPC 200 NC
@@ -187,7 +189,6 @@
sonixj 06f8:3008 Hercules Deluxe Optical Glass
pac7311 06f8:3009 Hercules Classic Link
spca508 0733:0110 ViewQuest VQ110
-spca508 0130:0130 Clone Digital Webcam 11043
spca501 0733:0401 Intel Create and Share
spca501 0733:0402 ViewQuest M318B
spca505 0733:0430 Intel PC Camera Pro
@@ -202,6 +203,7 @@
spca500 08ca:0103 Aiptek PocketDV
sunplus 08ca:0104 Aiptek PocketDVII 1.3
sunplus 08ca:0106 Aiptek Pocket DV3100+
+mr97310a 08ca:0110 Trust Spyc@m 100
mr97310a 08ca:0111 Aiptek PenCam VGA+
sunplus 08ca:2008 Aiptek Mini PenCam 2 M
sunplus 08ca:2010 Aiptek PocketCam 3M
@@ -222,7 +224,7 @@
pac207 093a:2461 HP Webcam
pac207 093a:2463 Philips SPC 220 NC
pac207 093a:2464 Labtec Webcam 1200
-pac207 093a:2468 PAC207
+pac207 093a:2468 Webcam WB-1400T
pac207 093a:2470 Genius GF112
pac207 093a:2471 Genius VideoCam ge111
pac207 093a:2472 Genius VideoCam ge110
@@ -230,7 +232,7 @@
pac207 093a:2476 Genius e-Messenger 112
pac7311 093a:2600 PAC7311 Typhoon
pac7311 093a:2601 Philips SPC 610 NC
-pac7311 093a:2603 PAC7312
+pac7311 093a:2603 Philips SPC 500 NC
pac7311 093a:2608 Trust WB-3300p
pac7311 093a:260e Gigaware VGA PC Camera, Trust WB-3350p, SIGMA cam 2350
pac7311 093a:260f SnakeCam
@@ -239,6 +241,7 @@
pac7311 093a:2622 Genius Eye 312
pac7311 093a:2624 PAC7302
pac7311 093a:2626 Labtec 2200
+pac7311 093a:2628 Genius iLook 300
pac7311 093a:2629 Genious iSlim 300
pac7311 093a:262a Webcam 300k
pac7311 093a:262c Philips SPC 230 NC
@@ -250,7 +253,7 @@
zc3xx 0ac8:301b Z-Star zc301b
zc3xx 0ac8:303b Vimicro 0x303b
zc3xx 0ac8:305b Z-star Vimicro zc0305b
-zc3xx 0ac8:307b Ldlc VC302+Ov7620
+zc3xx 0ac8:307b PC Camera (ZS0211)
vc032x 0ac8:c001 Sony embedded vimicro
vc032x 0ac8:c002 Sony embedded vimicro
vc032x 0ac8:c301 Samsung Q1 Ultra Premium
diff --git a/Documentation/video4linux/si4713.txt b/Documentation/video4linux/si4713.txt
index 25abdb7..2e7392a 100644
--- a/Documentation/video4linux/si4713.txt
+++ b/Documentation/video4linux/si4713.txt
@@ -164,7 +164,7 @@
The device can also be configured using the available sub channels for
transmission. To do that use S/G_MODULATOR ioctl and configure txsubchans properly.
-Refer to v4l2-spec for proper use of this ioctl.
+Refer to the V4L2 API specification for proper use of this ioctl.
Testing
=======
diff --git a/Documentation/video4linux/zr364xx.txt b/Documentation/video4linux/zr364xx.txt
index 7f3d195..d98e4d3 100644
--- a/Documentation/video4linux/zr364xx.txt
+++ b/Documentation/video4linux/zr364xx.txt
@@ -66,3 +66,4 @@
0x0a17 0x004e Pentax Optio 50
0x041e 0x405d Creative DiVi CAM 516
0x08ca 0x2102 Aiptek DV T300
+0x06d6 0x003d Trust Powerc@m 910Z
diff --git a/Documentation/vm/page-types.c b/Documentation/vm/page-types.c
index 4793c6a..ea44ea50 100644
--- a/Documentation/vm/page-types.c
+++ b/Documentation/vm/page-types.c
@@ -301,7 +301,7 @@
present = (flags >> i) & 1;
if (!page_flag_names[i]) {
if (present)
- fatal("unkown flag bit %d\n", i);
+ fatal("unknown flag bit %d\n", i);
continue;
}
buf[j++] = present ? page_flag_names[i][0] : '_';
diff --git a/Documentation/vm/slub.txt b/Documentation/vm/slub.txt
index 510917f..b37300e 100644
--- a/Documentation/vm/slub.txt
+++ b/Documentation/vm/slub.txt
@@ -245,7 +245,7 @@
has the length of 8 characters. However, a 8 character string needs a
terminating 0. That zero has overwritten the first byte of the Redzone field.
After reporting the details of the issue encountered the FIX SLUB message
-tell us that SLUB has restored the Redzone to its proper value and then
+tells us that SLUB has restored the Redzone to its proper value and then
system operations continue.
Emergency operations:
diff --git a/MAINTAINERS b/MAINTAINERS
index c34f772..98d5ca1 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -327,6 +327,13 @@
S: Maintained
F: drivers/macintosh/therm_adt746x.c
+ADT7475 HARDWARE MONITOR DRIVER
+M: Jean Delvare <khali@linux-fr.org>
+L: lm-sensors@lm-sensors.org
+S: Maintained
+F: Documentation/hwmon/adt7475
+F: drivers/hwmon/adt7475.c
+
ADVANSYS SCSI DRIVER
M: Matthew Wilcox <matthew@wil.cx>
L: linux-scsi@vger.kernel.org
@@ -486,13 +493,6 @@
F: drivers/net/appletalk/
F: net/appletalk/
-APPLETOUCH TOUCHPAD DRIVER
-M: Johannes Berg <johannes@sipsolutions.net>
-L: linux-input@vger.kernel.org
-S: Maintained
-F: Documentation/input/appletouch.txt
-F: drivers/input/mouse/appletouch.c
-
ARC FRAMEBUFFER DRIVER
M: Jaya Kumar <jayalk@intworks.biz>
S: Maintained
@@ -2423,7 +2423,9 @@
L: lm-sensors@lm-sensors.org
W: http://www.lm-sensors.org/
S: Orphan
+F: Documentation/hwmon/
F: drivers/hwmon/
+F: include/linux/hwmon*.h
HARDWARE RANDOM NUMBER GENERATOR CORE
M: Matt Mackall <mpm@selenic.com>
@@ -3139,6 +3141,7 @@
F: Documentation/s390/kvm.txt
F: arch/s390/include/asm/kvm*
F: arch/s390/kvm/
+F: drivers/s390/kvm/
KEXEC
M: Eric Biederman <ebiederm@xmission.com>
@@ -3318,6 +3321,12 @@
F: Documentation/hwmon/lis3lv02d
F: drivers/hwmon/lis3lv02d.*
+LM73 HARDWARE MONITOR DRIVER
+M: Guillaume Ligneul <guillaume.ligneul@gmail.com>
+L: lm-sensors@lm-sensors.org
+S: Maintained
+F: drivers/hwmon/lm73.c
+
LM83 HARDWARE MONITOR DRIVER
M: Jean Delvare <khali@linux-fr.org>
L: lm-sensors@lm-sensors.org
@@ -4212,6 +4221,13 @@
S: Supported
F: drivers/scsi/pmcraid.*
+PMC SIERRA PM8001 DRIVER
+M: jack_wang@usish.com
+M: lindar_liu@usish.com
+L: linux-scsi@vger.kernel.org
+S: Supported
+F: drivers/scsi/pm8001/
+
POSIX CLOCKS and TIMERS
M: Thomas Gleixner <tglx@linutronix.de>
S: Supported
@@ -4570,6 +4586,7 @@
W: http://www.ibm.com/developerworks/linux/linux390/
S: Supported
F: arch/s390/
+F: drivers/s390/
S390 NETWORK DRIVERS
M: Ursula Braun <ursula.braun@de.ibm.com>
@@ -4585,6 +4602,7 @@
M: Ralph Wuerthner <ralph.wuerthner@de.ibm.com>
M: linux390@de.ibm.com
L: linux-s390@vger.kernel.org
+W: http://www.ibm.com/developerworks/linux/linux390/
S: Supported
F: drivers/s390/crypto/
@@ -5334,7 +5352,7 @@
F: drivers/scsi/u14-34f.c
UBI FILE SYSTEM (UBIFS)
-M: Artem Bityutskiy <dedekind@infradead.org>
+M: Artem Bityutskiy <dedekind1@gmail.com>
M: Adrian Hunter <adrian.hunter@nokia.com>
L: linux-mtd@lists.infradead.org
T: git git://git.infradead.org/ubifs-2.6.git
@@ -5385,7 +5403,7 @@
F: include/linux/cdrom.h
UNSORTED BLOCK IMAGES (UBI)
-M: Artem Bityutskiy <dedekind@infradead.org>
+M: Artem Bityutskiy <dedekind1@gmail.com>
W: http://www.linux-mtd.infradead.org/
L: linux-mtd@lists.infradead.org
T: git git://git.infradead.org/ubi-2.6.git
@@ -5786,6 +5804,14 @@
S: Maintained
F: drivers/net/vmxnet3/
+VMware PVSCSI driver
+M: Alok Kataria <akataria@vmware.com>
+M: VMware PV-Drivers <pv-drivers@vmware.com>
+L: linux-scsi@vger.kernel.org
+S: Maintained
+F: drivers/scsi/vmw_pvscsi.c
+F: drivers/scsi/vmw_pvscsi.h
+
VOLTAGE AND CURRENT REGULATOR FRAMEWORK
M: Liam Girdwood <lrg@slimlogic.co.uk>
M: Mark Brown <broonie@opensource.wolfsonmicro.com>
diff --git a/arch/alpha/mm/numa.c b/arch/alpha/mm/numa.c
index 10b4035..7b2c56d 100644
--- a/arch/alpha/mm/numa.c
+++ b/arch/alpha/mm/numa.c
@@ -197,7 +197,7 @@
}
if (bootmap_start == -1)
- panic("couldn't find a contigous place for the bootmap");
+ panic("couldn't find a contiguous place for the bootmap");
/* Allocate the bootmap and mark the whole MM as reserved. */
bootmap_size = init_bootmem_node(NODE_DATA(nid), bootmap_start,
diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c
index 7713a08..37bda5f 100644
--- a/arch/arm/common/scoop.c
+++ b/arch/arm/common/scoop.c
@@ -82,7 +82,7 @@
{
struct scoop_dev *sdev = container_of(chip, struct scoop_dev, gpio);
- /* XXX: I'm usure, but it seems so */
+ /* XXX: I'm unsure, but it seems so */
return ioread16(sdev->base + SCOOP_GPRR) & (1 << (offset + 1));
}
diff --git a/arch/arm/configs/da830_omapl137_defconfig b/arch/arm/configs/da830_omapl137_defconfig
deleted file mode 100644
index 7c8e38f..0000000
--- a/arch/arm/configs/da830_omapl137_defconfig
+++ /dev/null
@@ -1,1254 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc2-davinci1
-# Wed May 13 15:33:29 2009
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-
-#
-# RCU Subsystem
-#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_RD_GZIP=y
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_LZMA is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_ANON_INODES=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_CLK=y
-# CONFIG_SLOW_WORK is not set
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-# CONFIG_FREEZER is not set
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-CONFIG_ARCH_DAVINCI=y
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
-CONFIG_CP_INTC=y
-
-#
-# TI DaVinci Implementations
-#
-
-#
-# DaVinci Core Type
-#
-# CONFIG_ARCH_DAVINCI_DM644x is not set
-# CONFIG_ARCH_DAVINCI_DM646x is not set
-# CONFIG_ARCH_DAVINCI_DM355 is not set
-CONFIG_ARCH_DAVINCI_DA830=y
-
-#
-# DaVinci Board Type
-#
-CONFIG_MACH_DAVINCI_DA830_EVM=y
-CONFIG_DAVINCI_MUX=y
-# CONFIG_DAVINCI_MUX_DEBUG is not set
-# CONFIG_DAVINCI_MUX_WARNINGS is not set
-CONFIG_DAVINCI_RESET_CLOCKS=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-CONFIG_CPU_DCACHE_WRITETHROUGH=y
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_COMMON_CLKDEV=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT=y
-CONFIG_HZ=100
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_LEDS=y
-# CONFIG_LEDS_CPU is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Power Management
-#
-# CONFIG_CPU_IDLE is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_HAVE_AOUT=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NETFILTER_XTABLES is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_NF_DEFRAG_IPV4 is not set
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# IPv6: Netfilter Configuration
-#
-# CONFIG_IP6_NF_QUEUE is not set
-# CONFIG_IP6_NF_IPTABLES is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_PHONET is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=1
-CONFIG_BLK_DEV_RAM_SIZE=32768
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-CONFIG_EEPROM_AT24=y
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=m
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-CONFIG_TUN=m
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-CONFIG_LXT_PHY=y
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-CONFIG_LSI_ET1011C_PHY=y
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-CONFIG_TI_DAVINCI_EMAC=y
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-CONFIG_NETCONSOLE=y
-# CONFIG_NETCONSOLE_DYNAMIC is not set
-CONFIG_NETPOLL=y
-CONFIG_NETPOLL_TRAP=y
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=m
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_EVDEV=m
-CONFIG_INPUT_EVBUG=m
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=m
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-CONFIG_KEYBOARD_XTKBD=m
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_KEYBOARD_GPIO=y
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-# CONFIG_VT_CONSOLE is not set
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=3
-CONFIG_SERIAL_8250_RUNTIME_UARTS=3
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-CONFIG_I2C_DAVINCI=y
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# Memory mapped GPIO expanders:
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-CONFIG_GPIO_PCF857X=m
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_DAVINCI_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_SOUND=m
-# CONFIG_SOUND_OSS_CORE is not set
-CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_JACK=y
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_SOC=m
-CONFIG_SND_DAVINCI_SOC=m
-CONFIG_SND_SOC_I2C_AND_SPI=m
-# CONFIG_SND_SOC_ALL_CODECS is not set
-# CONFIG_SOUND_PRIME is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_USB_MUSB_HOST is not set
-# CONFIG_USB_MUSB_PERIPHERAL is not set
-# CONFIG_USB_MUSB_OTG is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_XFS_FS=m
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_DEBUG is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-CONFIG_AUTOFS4_FS=m
-# CONFIG_FUSE_FS is not set
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-CONFIG_MINIX_FS=m
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-CONFIG_TIMER_STATS=y
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-CONFIG_DEBUG_PREEMPT=y
-CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_PI_LIST=y
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-# CONFIG_PAGE_POISONING is not set
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
-# CONFIG_BINARY_PRINTF is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-CONFIG_CRC_T10DIF=m
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_NLATTR=y
diff --git a/arch/arm/configs/da850_omapl138_defconfig b/arch/arm/configs/da8xx_omapl_defconfig
similarity index 85%
rename from arch/arm/configs/da850_omapl138_defconfig
rename to arch/arm/configs/da8xx_omapl_defconfig
index 842a70b..50bd25a 100644
--- a/arch/arm/configs/da850_omapl138_defconfig
+++ b/arch/arm/configs/da8xx_omapl_defconfig
@@ -1,15 +1,13 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-davinci1
-# Mon Jun 29 07:54:15 2009
+# Linux kernel version: 2.6.32-rc5
+# Thu Oct 22 12:19:19 2009
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -18,14 +16,14 @@
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_HAS_CPUFREQ=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
@@ -48,11 +46,12 @@
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
@@ -62,8 +61,7 @@
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
@@ -80,7 +78,6 @@
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
@@ -93,6 +90,10 @@
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
CONFIG_COMPAT_BRK=y
@@ -100,12 +101,16 @@
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
@@ -118,7 +123,7 @@
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -139,19 +144,22 @@
#
# System Type
#
+CONFIG_MMU=y
# CONFIG_ARCH_AAEC2000 is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_NOMADIK is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
@@ -160,25 +168,27 @@
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_L7200 is not set
# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
# CONFIG_ARCH_LOKI is not set
# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_MSM is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
CONFIG_ARCH_DAVINCI=y
# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_BCMRING is not set
CONFIG_CP_INTC=y
#
@@ -191,7 +201,7 @@
# CONFIG_ARCH_DAVINCI_DM644x is not set
# CONFIG_ARCH_DAVINCI_DM355 is not set
# CONFIG_ARCH_DAVINCI_DM646x is not set
-# CONFIG_ARCH_DAVINCI_DA830 is not set
+CONFIG_ARCH_DAVINCI_DA830=y
CONFIG_ARCH_DAVINCI_DA850=y
CONFIG_ARCH_DAVINCI_DA8XX=y
# CONFIG_ARCH_DAVINCI_DM365 is not set
@@ -199,7 +209,14 @@
#
# DaVinci Board Type
#
+CONFIG_MACH_DAVINCI_DA830_EVM=y
+CONFIG_DA830_UI=y
+CONFIG_DA830_UI_LCD=y
+# CONFIG_DA830_UI_NAND is not set
CONFIG_MACH_DAVINCI_DA850_EVM=y
+CONFIG_DA850_UI_EXP=y
+CONFIG_DA850_UI_NONE=y
+# CONFIG_DA850_UI_RMII is not set
CONFIG_DAVINCI_MUX=y
# CONFIG_DAVINCI_MUX_DEBUG is not set
# CONFIG_DAVINCI_MUX_WARNINGS is not set
@@ -212,7 +229,7 @@
CONFIG_CPU_ARM926T=y
CONFIG_CPU_32v5=y
CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_PABRT_LEGACY=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_COPY_V4WB=y
CONFIG_CPU_TLB_V4WBI=y
@@ -225,9 +242,9 @@
CONFIG_ARM_THUMB=y
# CONFIG_CPU_ICACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+CONFIG_CPU_DCACHE_WRITETHROUGH=y
# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
CONFIG_COMMON_CLKDEV=y
#
@@ -248,11 +265,12 @@
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_HZ=100
CONFIG_AEABI=y
# CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
# CONFIG_HIGHMEM is not set
@@ -268,12 +286,14 @@
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_LEDS=y
# CONFIG_LEDS_CPU is not set
CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
#
# Boot options
@@ -287,7 +307,24 @@
#
# CPU Power Management
#
-# CONFIG_CPU_IDLE is not set
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=m
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=m
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
#
# Floating point emulation
@@ -401,6 +438,7 @@
# CONFIG_IP6_NF_IPTABLES is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
@@ -415,6 +453,7 @@
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -440,6 +479,7 @@
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
@@ -460,6 +500,7 @@
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
CONFIG_MISC_DEVICES=y
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
@@ -471,6 +512,7 @@
#
CONFIG_EEPROM_AT24=y
# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -494,10 +536,6 @@
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
@@ -522,7 +560,6 @@
# CONFIG_ATA is not set
# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -553,7 +590,7 @@
CONFIG_MII=y
# CONFIG_AX88796 is not set
# CONFIG_SMC91X is not set
-# CONFIG_TI_DAVINCI_EMAC is not set
+CONFIG_TI_DAVINCI_EMAC=y
# CONFIG_DM9000 is not set
# CONFIG_ETHOC is not set
# CONFIG_SMC911X is not set
@@ -567,12 +604,11 @@
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
@@ -588,6 +624,7 @@
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
#
# Input device support
@@ -611,23 +648,30 @@
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
CONFIG_KEYBOARD_ATKBD=m
-# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
-CONFIG_KEYBOARD_XTKBD=m
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+CONFIG_KEYBOARD_XTKBD=m
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
@@ -636,6 +680,7 @@
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
# CONFIG_INPUT_MISC is not set
#
@@ -684,6 +729,7 @@
# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
@@ -695,6 +741,7 @@
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_DAVINCI=y
+# CONFIG_I2C_DESIGNWARE is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
@@ -715,14 +762,17 @@
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_DEBUG_GPIO is not set
@@ -736,8 +786,8 @@
# I2C GPIO expanders:
#
# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-CONFIG_GPIO_PCF857X=m
+CONFIG_GPIO_PCA953X=y
+CONFIG_GPIO_PCF857X=y
#
# PCI GPIO expanders:
@@ -746,11 +796,14 @@
#
# SPI GPIO expanders:
#
+
+#
+# AC97 GPIO expanders:
+#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -782,31 +835,56 @@
# CONFIG_MFD_TC6393XB is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_AB3100_CORE is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_REGULATOR_TPS65023 is not set
+CONFIG_REGULATOR_TPS6507X=y
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_DAVINCI is not set
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_FB_DA8XX=y
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
@@ -819,6 +897,16 @@
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=m
# CONFIG_SOUND_OSS_CORE is not set
CONFIG_SND=m
@@ -834,6 +922,11 @@
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_DRIVERS=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_MTPAV is not set
@@ -842,6 +935,8 @@
CONFIG_SND_ARM=y
CONFIG_SND_SOC=m
CONFIG_SND_DAVINCI_SOC=m
+# CONFIG_SND_DA830_SOC_EVM is not set
+# CONFIG_SND_DA850_SOC_EVM is not set
CONFIG_SND_SOC_I2C_AND_SPI=m
# CONFIG_SND_SOC_ALL_CODECS is not set
# CONFIG_SOUND_PRIME is not set
@@ -849,14 +944,17 @@
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
CONFIG_RTC_LIB=y
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
@@ -877,14 +975,17 @@
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
CONFIG_XFS_FS=m
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
# CONFIG_XFS_DEBUG is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -943,7 +1044,6 @@
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
@@ -1039,6 +1139,7 @@
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
@@ -1056,6 +1157,7 @@
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
CONFIG_DEBUG_PREEMPT=y
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_PI_LIST=y
@@ -1076,29 +1178,29 @@
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_PAGE_POISONING is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
@@ -1125,7 +1227,6 @@
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
@@ -1157,11 +1258,13 @@
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig
index ddffe39..bd656e8 100644
--- a/arch/arm/configs/davinci_all_defconfig
+++ b/arch/arm/configs/davinci_all_defconfig
@@ -1,14 +1,13 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc3-davinci1
-# Fri Jul 17 08:26:52 2009
+# Linux kernel version: 2.6.32-rc4
+# Mon Oct 12 14:13:12 2009
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -46,11 +45,12 @@
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
@@ -91,17 +91,15 @@
CONFIG_AIO=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
@@ -145,6 +143,7 @@
#
# System Type
#
+CONFIG_MMU=y
# CONFIG_ARCH_AAEC2000 is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
@@ -159,6 +158,7 @@
# CONFIG_ARCH_STMP3XXX is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
@@ -181,11 +181,13 @@
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_U300 is not set
CONFIG_ARCH_DAVINCI=y
# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
CONFIG_AINTC=y
CONFIG_ARCH_DAVINCI_DMx=y
@@ -208,6 +210,7 @@
#
CONFIG_MACH_DAVINCI_EVM=y
CONFIG_MACH_SFFSDR=y
+CONFIG_MACH_NEUROS_OSD2=y
CONFIG_MACH_DAVINCI_DM355_EVM=y
CONFIG_MACH_DM355_LEOPARD=y
CONFIG_MACH_DAVINCI_DM6467_EVM=y
@@ -224,7 +227,7 @@
CONFIG_CPU_ARM926T=y
CONFIG_CPU_32v5=y
CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_PABRT_LEGACY=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_COPY_V4WB=y
CONFIG_CPU_TLB_V4WBI=y
@@ -239,6 +242,7 @@
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
CONFIG_COMMON_CLKDEV=y
#
@@ -259,6 +263,8 @@
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_HZ=100
CONFIG_AEABI=y
@@ -280,6 +286,7 @@
CONFIG_VIRT_TO_BUS=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_LEDS=y
# CONFIG_LEDS_CPU is not set
@@ -412,6 +419,7 @@
# CONFIG_IP6_NF_IPTABLES is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
@@ -452,6 +460,7 @@
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
@@ -461,9 +470,9 @@
# CONFIG_CONNECTOR is not set
CONFIG_MTD=m
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_AFS_PARTS is not set
# CONFIG_MTD_AR7_PARTS is not set
@@ -499,7 +508,7 @@
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_INTELEXT=m
CONFIG_MTD_CFI_AMDSTD=m
# CONFIG_MTD_CFI_STAA is not set
CONFIG_MTD_CFI_UTIL=m
@@ -694,12 +703,10 @@
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
@@ -734,6 +741,7 @@
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
#
# Input device support
@@ -745,10 +753,7 @@
#
# Userland interfaces
#
-CONFIG_INPUT_MOUSEDEV=m
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=m
CONFIG_INPUT_EVBUG=m
@@ -757,12 +762,16 @@
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
CONFIG_KEYBOARD_ATKBD=m
+# CONFIG_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
CONFIG_KEYBOARD_GPIO=y
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
CONFIG_KEYBOARD_XTKBD=m
@@ -777,6 +786,7 @@
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
@@ -787,7 +797,17 @@
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC2007 is not set
# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_INPUT_MISC is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
+# CONFIG_INPUT_UINPUT is not set
+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
+CONFIG_INPUT_DM355EVM=m
+CONFIG_INPUT_DM365EVM=m
#
# Hardware I/O ports
@@ -828,13 +848,13 @@
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_HW_RANDOM is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
@@ -868,13 +888,17 @@
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_DEBUG_GPIO is not set
@@ -889,7 +913,7 @@
#
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
-CONFIG_GPIO_PCF857X=m
+CONFIG_GPIO_PCF857X=y
#
# PCI GPIO expanders:
@@ -898,10 +922,19 @@
#
# SPI GPIO expanders:
#
+
+#
+# AC97 GPIO expanders:
+#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
@@ -950,6 +983,7 @@
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
@@ -959,9 +993,7 @@
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -988,7 +1020,7 @@
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_ASIC3 is not set
-# CONFIG_MFD_DM355EVM_MSP is not set
+CONFIG_MFD_DM355EVM_MSP=y
# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TPS65010 is not set
@@ -999,9 +1031,11 @@
# CONFIG_MFD_TC6393XB is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
+# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
@@ -1013,9 +1047,9 @@
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
@@ -1032,6 +1066,7 @@
# Frame buffer hardware drivers
#
# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_DAVINCI=y
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
@@ -1101,7 +1136,6 @@
# CONFIG_SOUND_PRIME is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
#
@@ -1130,6 +1164,7 @@
CONFIG_HID_EZKEY=m
# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=m
+# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=m
# CONFIG_LOGITECH_FF is not set
@@ -1176,6 +1211,7 @@
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HWA_HCD is not set
@@ -1269,6 +1305,7 @@
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
# CONFIG_USB_GADGET_PXA27X is not set
# CONFIG_USB_GADGET_S3C_HSOTG is not set
# CONFIG_USB_GADGET_IMX is not set
@@ -1286,6 +1323,7 @@
# CONFIG_USB_AUDIO is not set
CONFIG_USB_ETH=m
CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_ETH_EEM is not set
CONFIG_USB_GADGETFS=m
CONFIG_USB_FILE_STORAGE=m
# CONFIG_USB_FILE_STORAGE_TEST is not set
@@ -1316,8 +1354,10 @@
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
+CONFIG_MMC_DAVINCI=m
# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m
@@ -1345,6 +1385,7 @@
#
# iptables trigger is under Netfilter config (LED target)
#
+# CONFIG_ACCESSIBILITY is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=m
@@ -1370,6 +1411,7 @@
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_DM355EVM is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
@@ -1399,8 +1441,11 @@
#
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
@@ -1429,6 +1474,7 @@
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
@@ -1500,7 +1546,6 @@
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
@@ -1596,6 +1641,7 @@
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
@@ -1634,11 +1680,14 @@
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
@@ -1663,7 +1712,7 @@
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
+# CONFIG_ARM_UNWIND is not set
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
# CONFIG_DEBUG_STACK_USAGE is not set
@@ -1681,7 +1730,6 @@
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
@@ -1713,11 +1761,13 @@
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index a57af3e..809114d 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -866,6 +866,57 @@
/* --------------------------------------------------------------------
+ * Touchscreen
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC) || defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC_MODULE)
+static u64 tsadcc_dmamask = DMA_BIT_MASK(32);
+static struct at91_tsadcc_data tsadcc_data;
+
+static struct resource tsadcc_resources[] = {
+ [0] = {
+ .start = AT91SAM9G45_BASE_TSC,
+ .end = AT91SAM9G45_BASE_TSC + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9G45_ID_TSC,
+ .end = AT91SAM9G45_ID_TSC,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct platform_device at91sam9g45_tsadcc_device = {
+ .name = "atmel_tsadcc",
+ .id = -1,
+ .dev = {
+ .dma_mask = &tsadcc_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &tsadcc_data,
+ },
+ .resource = tsadcc_resources,
+ .num_resources = ARRAY_SIZE(tsadcc_resources),
+};
+
+void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data)
+{
+ if (!data)
+ return;
+
+ at91_set_gpio_input(AT91_PIN_PD20, 0); /* AD0_XR */
+ at91_set_gpio_input(AT91_PIN_PD21, 0); /* AD1_XL */
+ at91_set_gpio_input(AT91_PIN_PD22, 0); /* AD2_YT */
+ at91_set_gpio_input(AT91_PIN_PD23, 0); /* AD3_TB */
+
+ tsadcc_data = *data;
+ platform_device_register(&at91sam9g45_tsadcc_device);
+}
+#else
+void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
* RTT
* -------------------------------------------------------------------- */
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index d345f54..53aaa94 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -622,6 +622,7 @@
#if defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC) || defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC_MODULE)
static u64 tsadcc_dmamask = DMA_BIT_MASK(32);
+static struct at91_tsadcc_data tsadcc_data;
static struct resource tsadcc_resources[] = {
[0] = {
@@ -642,22 +643,27 @@
.dev = {
.dma_mask = &tsadcc_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &tsadcc_data,
},
.resource = tsadcc_resources,
.num_resources = ARRAY_SIZE(tsadcc_resources),
};
-void __init at91_add_device_tsadcc(void)
+void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data)
{
+ if (!data)
+ return;
+
at91_set_A_periph(AT91_PIN_PA17, 0); /* AD0_XR */
at91_set_A_periph(AT91_PIN_PA18, 0); /* AD1_XL */
at91_set_A_periph(AT91_PIN_PA19, 0); /* AD2_YT */
at91_set_A_periph(AT91_PIN_PA20, 0); /* AD3_TB */
+ tsadcc_data = *data;
platform_device_register(&at91sam9rl_tsadcc_device);
}
#else
-void __init at91_add_device_tsadcc(void) {}
+void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data) {}
#endif
diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
index 1cf4d86..98f9f4b 100644
--- a/arch/arm/mach-at91/board-sam9m10g45ek.c
+++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
@@ -229,6 +229,16 @@
/*
+ * Touchscreen
+ */
+static struct at91_tsadcc_data ek_tsadcc_data = {
+ .adc_clock = 300000,
+ .pendet_debounce = 0x0d,
+ .ts_sample_hold_time = 0x0a,
+};
+
+
+/*
* GPIO Buttons
*/
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
@@ -379,6 +389,8 @@
at91_add_device_i2c(0, NULL, 0);
/* LCD Controller */
at91_add_device_lcdc(&ek_lcdc_data);
+ /* Touch Screen */
+ at91_add_device_tsadcc(&ek_tsadcc_data);
/* Push Buttons */
ek_add_device_buttons();
/* AC97 */
diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
index bd28e98..7ac20f3 100644
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -243,6 +243,16 @@
/*
+ * Touchscreen
+ */
+static struct at91_tsadcc_data ek_tsadcc_data = {
+ .adc_clock = 1000000,
+ .pendet_debounce = 0x0f,
+ .ts_sample_hold_time = 0x03,
+};
+
+
+/*
* GPIO Buttons
*/
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
@@ -310,7 +320,7 @@
/* AC97 */
at91_add_device_ac97(&ek_ac97_data);
/* Touch Screen Controller */
- at91_add_device_tsadcc();
+ at91_add_device_tsadcc(&ek_tsadcc_data);
/* LEDs */
at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
/* Push Buttons */
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index 2295d80..bb6f6a7 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -187,7 +187,12 @@
extern void __init at91_add_device_isi(void);
/* Touchscreen Controller */
-extern void __init at91_add_device_tsadcc(void);
+struct at91_tsadcc_data {
+ unsigned int adc_clock;
+ u8 pendet_debounce;
+ u8 ts_sample_hold_time;
+};
+extern void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data);
/* CAN */
struct at91_can_data {
diff --git a/arch/arm/mach-bcmring/include/csp/reg.h b/arch/arm/mach-bcmring/include/csp/reg.h
index e5f60bf..56654d2 100644
--- a/arch/arm/mach-bcmring/include/csp/reg.h
+++ b/arch/arm/mach-bcmring/include/csp/reg.h
@@ -16,7 +16,7 @@
/**
* @file reg.h
*
-* @brief Generic register defintions used in CSP
+* @brief Generic register definitions used in CSP
*/
/****************************************************************************/
diff --git a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h
index 375066a..cbf334d 100644
--- a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h
+++ b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h
@@ -83,7 +83,7 @@
* @brief Get next available transaction width
*
*
-* @return On sucess : Next avail able transaction width
+* @return On success : Next available transaction width
* On failure : dmacHw_TRANSACTION_WIDTH_8
*
* @note
diff --git a/arch/arm/mach-bcmring/include/mach/csp/mm_addr.h b/arch/arm/mach-bcmring/include/mach/csp/mm_addr.h
index 86bb58d..ad58cf8 100644
--- a/arch/arm/mach-bcmring/include/mach/csp/mm_addr.h
+++ b/arch/arm/mach-bcmring/include/mach/csp/mm_addr.h
@@ -16,7 +16,7 @@
/**
* @file mm_addr.h
*
-* @brief Memory Map address defintions
+* @brief Memory Map address definitions
*
* @note
* None
diff --git a/arch/arm/mach-bcmring/include/mach/dma.h b/arch/arm/mach-bcmring/include/mach/dma.h
index 847980c..1f2c531 100644
--- a/arch/arm/mach-bcmring/include/mach/dma.h
+++ b/arch/arm/mach-bcmring/include/mach/dma.h
@@ -651,7 +651,7 @@
/**
* Creates a descriptor ring from a memory mapping.
*
-* @return 0 on sucess, error code otherwise.
+* @return 0 on success, error code otherwise.
*/
/****************************************************************************/
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index 40866c6..033bfed 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -32,11 +32,13 @@
bool "DA830/OMAP-L137 based system"
select CP_INTC
select ARCH_DAVINCI_DA8XX
+ select CPU_DCACHE_WRITETHROUGH # needed on silicon revs 1.0, 1.1
config ARCH_DAVINCI_DA850
bool "DA850/OMAP-L138 based system"
select CP_INTC
select ARCH_DAVINCI_DA8XX
+ select ARCH_HAS_CPUFREQ
config ARCH_DAVINCI_DA8XX
bool
@@ -63,6 +65,13 @@
Say Y here to select the Lyrtech Small Form Factor
Software Defined Radio (SFFSDR) board.
+config MACH_NEUROS_OSD2
+ bool "Neuros OSD2 Open Television Set Top Box"
+ depends on ARCH_DAVINCI_DM644x
+ help
+ Configure this option to specify the whether the board used
+ for development is a Neuros OSD2 Open Set Top Box.
+
config MACH_DAVINCI_DM355_EVM
bool "TI DM355 EVM"
default ARCH_DAVINCI_DM355
@@ -98,16 +107,66 @@
bool "TI DA830/OMAP-L137 Reference Platform"
default ARCH_DAVINCI_DA830
depends on ARCH_DAVINCI_DA830
+ select GPIO_PCF857X
help
Say Y here to select the TI DA830/OMAP-L137 Evaluation Module.
+choice
+ prompt "Select DA830/OMAP-L137 UI board peripheral"
+ depends on MACH_DAVINCI_DA830_EVM
+ help
+ The presence of UI card on the DA830/OMAP-L137 EVM is detected
+ automatically based on successful probe of the I2C based GPIO
+ expander on that board. This option selected in this menu has
+ an effect only in case of a successful UI card detection.
+
+config DA830_UI_LCD
+ bool "LCD"
+ help
+ Say Y here to use the LCD as a framebuffer or simple character
+ display.
+
+config DA830_UI_NAND
+ bool "NAND flash"
+ help
+ Say Y here to use the NAND flash. Do not forget to setup
+ the switch correctly.
+endchoice
+
config MACH_DAVINCI_DA850_EVM
bool "TI DA850/OMAP-L138 Reference Platform"
default ARCH_DAVINCI_DA850
depends on ARCH_DAVINCI_DA850
+ select GPIO_PCA953X
help
Say Y here to select the TI DA850/OMAP-L138 Evaluation Module.
+choice
+ prompt "Select peripherals connected to expander on UI board"
+ depends on MACH_DAVINCI_DA850_EVM
+ help
+ The presence of User Interface (UI) card on the DA850/OMAP-L138
+ EVM is detected automatically based on successful probe of the I2C
+ based GPIO expander on that card. This option selected in this
+ menu has an effect only in case of a successful UI card detection.
+
+config DA850_UI_NONE
+ bool "No peripheral is enabled"
+ help
+ Say Y if you do not want to enable any of the peripherals connected
+ to TCA6416 expander on DA850/OMAP-L138 EVM UI card
+
+config DA850_UI_RMII
+ bool "RMII Ethernet PHY"
+ help
+ Say Y if you want to use the RMII PHY on the DA850/OMAP-L138 EVM.
+ This PHY is found on the UI daughter card that is supplied with
+ the EVM.
+ NOTE: Please take care while choosing this option, MII PHY will
+ not be functional if RMII mode is selected.
+
+endchoice
+
config DAVINCI_MUX
bool "DAVINCI multiplexing support"
depends on ARCH_DAVINCI
diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile
index 2e11e84..eeb9230 100644
--- a/arch/arm/mach-davinci/Makefile
+++ b/arch/arm/mach-davinci/Makefile
@@ -23,9 +23,14 @@
# Board specific
obj-$(CONFIG_MACH_DAVINCI_EVM) += board-dm644x-evm.o
obj-$(CONFIG_MACH_SFFSDR) += board-sffsdr.o
+obj-$(CONFIG_MACH_NEUROS_OSD2) += board-neuros-osd2.o
obj-$(CONFIG_MACH_DAVINCI_DM355_EVM) += board-dm355-evm.o
obj-$(CONFIG_MACH_DM355_LEOPARD) += board-dm355-leopard.o
obj-$(CONFIG_MACH_DAVINCI_DM6467_EVM) += board-dm646x-evm.o
obj-$(CONFIG_MACH_DAVINCI_DM365_EVM) += board-dm365-evm.o
obj-$(CONFIG_MACH_DAVINCI_DA830_EVM) += board-da830-evm.o
obj-$(CONFIG_MACH_DAVINCI_DA850_EVM) += board-da850-evm.o
+
+# Power Management
+obj-$(CONFIG_CPU_FREQ) += cpufreq.o
+obj-$(CONFIG_CPU_IDLE) += cpuidle.o
diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index bfbb639..31dc990 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -10,51 +10,194 @@
* or implied.
*/
#include <linux/kernel.h>
-#include <linux/module.h>
#include <linux/init.h>
#include <linux/console.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
#include <linux/i2c.h>
+#include <linux/i2c/pcf857x.h>
#include <linux/i2c/at24.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <mach/common.h>
-#include <mach/irqs.h>
#include <mach/cp_intc.h>
+#include <mach/mux.h>
+#include <mach/nand.h>
#include <mach/da8xx.h>
-#include <mach/asp.h>
+#include <mach/usb.h>
#define DA830_EVM_PHY_MASK 0x0
#define DA830_EVM_MDIO_FREQUENCY 2200000 /* PHY bus frequency */
-static struct at24_platform_data da830_evm_i2c_eeprom_info = {
- .byte_len = SZ_256K / 8,
- .page_size = 64,
- .flags = AT24_FLAG_ADDR16,
- .setup = davinci_get_mac_addr,
- .context = (void *)0x7f00,
+#define DA830_EMIF25_ASYNC_DATA_CE3_BASE 0x62000000
+#define DA830_EMIF25_CONTROL_BASE 0x68000000
+
+/*
+ * USB1 VBUS is controlled by GPIO1[15], over-current is reported on GPIO2[4].
+ */
+#define ON_BD_USB_DRV GPIO_TO_PIN(1, 15)
+#define ON_BD_USB_OVC GPIO_TO_PIN(2, 4)
+
+static const short da830_evm_usb11_pins[] = {
+ DA830_GPIO1_15, DA830_GPIO2_4,
+ -1
};
-static struct i2c_board_info __initdata da830_evm_i2c_devices[] = {
- {
- I2C_BOARD_INFO("24c256", 0x50),
- .platform_data = &da830_evm_i2c_eeprom_info,
- },
- {
- I2C_BOARD_INFO("tlv320aic3x", 0x18),
+static da8xx_ocic_handler_t da830_evm_usb_ocic_handler;
+
+static int da830_evm_usb_set_power(unsigned port, int on)
+{
+ gpio_set_value(ON_BD_USB_DRV, on);
+ return 0;
+}
+
+static int da830_evm_usb_get_power(unsigned port)
+{
+ return gpio_get_value(ON_BD_USB_DRV);
+}
+
+static int da830_evm_usb_get_oci(unsigned port)
+{
+ return !gpio_get_value(ON_BD_USB_OVC);
+}
+
+static irqreturn_t da830_evm_usb_ocic_irq(int, void *);
+
+static int da830_evm_usb_ocic_notify(da8xx_ocic_handler_t handler)
+{
+ int irq = gpio_to_irq(ON_BD_USB_OVC);
+ int error = 0;
+
+ if (handler != NULL) {
+ da830_evm_usb_ocic_handler = handler;
+
+ error = request_irq(irq, da830_evm_usb_ocic_irq, IRQF_DISABLED |
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ "OHCI over-current indicator", NULL);
+ if (error)
+ printk(KERN_ERR "%s: could not request IRQ to watch "
+ "over-current indicator changes\n", __func__);
+ } else
+ free_irq(irq, NULL);
+
+ return error;
+}
+
+static struct da8xx_ohci_root_hub da830_evm_usb11_pdata = {
+ .set_power = da830_evm_usb_set_power,
+ .get_power = da830_evm_usb_get_power,
+ .get_oci = da830_evm_usb_get_oci,
+ .ocic_notify = da830_evm_usb_ocic_notify,
+
+ /* TPS2065 switch @ 5V */
+ .potpgt = (3 + 1) / 2, /* 3 ms max */
+};
+
+static irqreturn_t da830_evm_usb_ocic_irq(int irq, void *dev_id)
+{
+ da830_evm_usb_ocic_handler(&da830_evm_usb11_pdata, 1);
+ return IRQ_HANDLED;
+}
+
+static __init void da830_evm_usb_init(void)
+{
+ u32 cfgchip2;
+ int ret;
+
+ /*
+ * Set up USB clock/mode in the CFGCHIP2 register.
+ * FYI: CFGCHIP2 is 0x0000ef00 initially.
+ */
+ cfgchip2 = __raw_readl(DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP2_REG));
+
+ /* USB2.0 PHY reference clock is 24 MHz */
+ cfgchip2 &= ~CFGCHIP2_REFFREQ;
+ cfgchip2 |= CFGCHIP2_REFFREQ_24MHZ;
+
+ /*
+ * Select internal reference clock for USB 2.0 PHY
+ * and use it as a clock source for USB 1.1 PHY
+ * (this is the default setting anyway).
+ */
+ cfgchip2 &= ~CFGCHIP2_USB1PHYCLKMUX;
+ cfgchip2 |= CFGCHIP2_USB2PHYCLKMUX;
+
+ /*
+ * We have to override VBUS/ID signals when MUSB is configured into the
+ * host-only mode -- ID pin will float if no cable is connected, so the
+ * controller won't be able to drive VBUS thinking that it's a B-device.
+ * Otherwise, we want to use the OTG mode and enable VBUS comparators.
+ */
+ cfgchip2 &= ~CFGCHIP2_OTGMODE;
+#ifdef CONFIG_USB_MUSB_HOST
+ cfgchip2 |= CFGCHIP2_FORCE_HOST;
+#else
+ cfgchip2 |= CFGCHIP2_SESENDEN | CFGCHIP2_VBDTCTEN;
+#endif
+
+ __raw_writel(cfgchip2, DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP2_REG));
+
+ /* USB_REFCLKIN is not used. */
+ ret = davinci_cfg_reg(DA830_USB0_DRVVBUS);
+ if (ret)
+ pr_warning("%s: USB 2.0 PinMux setup failed: %d\n",
+ __func__, ret);
+ else {
+ /*
+ * TPS2065 switch @ 5V supplies 1 A (sustains 1.5 A),
+ * with the power on to power good time of 3 ms.
+ */
+ ret = da8xx_register_usb20(1000, 3);
+ if (ret)
+ pr_warning("%s: USB 2.0 registration failed: %d\n",
+ __func__, ret);
}
-};
-static struct davinci_i2c_platform_data da830_evm_i2c_0_pdata = {
- .bus_freq = 100, /* kHz */
- .bus_delay = 0, /* usec */
-};
+ ret = da8xx_pinmux_setup(da830_evm_usb11_pins);
+ if (ret) {
+ pr_warning("%s: USB 1.1 PinMux setup failed: %d\n",
+ __func__, ret);
+ return;
+ }
+
+ ret = gpio_request(ON_BD_USB_DRV, "ON_BD_USB_DRV");
+ if (ret) {
+ printk(KERN_ERR "%s: failed to request GPIO for USB 1.1 port "
+ "power control: %d\n", __func__, ret);
+ return;
+ }
+ gpio_direction_output(ON_BD_USB_DRV, 0);
+
+ ret = gpio_request(ON_BD_USB_OVC, "ON_BD_USB_OVC");
+ if (ret) {
+ printk(KERN_ERR "%s: failed to request GPIO for USB 1.1 port "
+ "over-current indicator: %d\n", __func__, ret);
+ return;
+ }
+ gpio_direction_input(ON_BD_USB_OVC);
+
+ ret = da8xx_register_usb11(&da830_evm_usb11_pdata);
+ if (ret)
+ pr_warning("%s: USB 1.1 registration failed: %d\n",
+ __func__, ret);
+}
static struct davinci_uart_config da830_evm_uart_config __initdata = {
.enabled_uarts = 0x7,
};
+static const short da830_evm_mcasp1_pins[] = {
+ DA830_AHCLKX1, DA830_ACLKX1, DA830_AFSX1, DA830_AHCLKR1, DA830_AFSR1,
+ DA830_AMUTE1, DA830_AXR1_0, DA830_AXR1_1, DA830_AXR1_2, DA830_AXR1_5,
+ DA830_ACLKR1, DA830_AXR1_6, DA830_AXR1_7, DA830_AXR1_8, DA830_AXR1_10,
+ DA830_AXR1_11,
+ -1
+};
+
static u8 da830_iis_serializer_direction[] = {
RX_MODE, INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE,
INACTIVE_MODE, TX_MODE, INACTIVE_MODE, INACTIVE_MODE,
@@ -74,6 +217,271 @@
.rxnumevt = 1,
};
+/*
+ * GPIO2[1] is used as MMC_SD_WP and GPIO2[2] as MMC_SD_INS.
+ */
+static const short da830_evm_mmc_sd_pins[] = {
+ DA830_MMCSD_DAT_0, DA830_MMCSD_DAT_1, DA830_MMCSD_DAT_2,
+ DA830_MMCSD_DAT_3, DA830_MMCSD_DAT_4, DA830_MMCSD_DAT_5,
+ DA830_MMCSD_DAT_6, DA830_MMCSD_DAT_7, DA830_MMCSD_CLK,
+ DA830_MMCSD_CMD, DA830_GPIO2_1, DA830_GPIO2_2,
+ -1
+};
+
+#define DA830_MMCSD_WP_PIN GPIO_TO_PIN(2, 1)
+
+static int da830_evm_mmc_get_ro(int index)
+{
+ return gpio_get_value(DA830_MMCSD_WP_PIN);
+}
+
+static struct davinci_mmc_config da830_evm_mmc_config = {
+ .get_ro = da830_evm_mmc_get_ro,
+ .wires = 4,
+ .max_freq = 50000000,
+ .caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
+ .version = MMC_CTLR_VERSION_2,
+};
+
+static inline void da830_evm_init_mmc(void)
+{
+ int ret;
+
+ ret = da8xx_pinmux_setup(da830_evm_mmc_sd_pins);
+ if (ret) {
+ pr_warning("da830_evm_init: mmc/sd mux setup failed: %d\n",
+ ret);
+ return;
+ }
+
+ ret = gpio_request(DA830_MMCSD_WP_PIN, "MMC WP");
+ if (ret) {
+ pr_warning("da830_evm_init: can not open GPIO %d\n",
+ DA830_MMCSD_WP_PIN);
+ return;
+ }
+ gpio_direction_input(DA830_MMCSD_WP_PIN);
+
+ ret = da8xx_register_mmcsd0(&da830_evm_mmc_config);
+ if (ret) {
+ pr_warning("da830_evm_init: mmc/sd registration failed: %d\n",
+ ret);
+ gpio_free(DA830_MMCSD_WP_PIN);
+ }
+}
+
+/*
+ * UI board NAND/NOR flashes only use 8-bit data bus.
+ */
+static const short da830_evm_emif25_pins[] = {
+ DA830_EMA_D_0, DA830_EMA_D_1, DA830_EMA_D_2, DA830_EMA_D_3,
+ DA830_EMA_D_4, DA830_EMA_D_5, DA830_EMA_D_6, DA830_EMA_D_7,
+ DA830_EMA_A_0, DA830_EMA_A_1, DA830_EMA_A_2, DA830_EMA_A_3,
+ DA830_EMA_A_4, DA830_EMA_A_5, DA830_EMA_A_6, DA830_EMA_A_7,
+ DA830_EMA_A_8, DA830_EMA_A_9, DA830_EMA_A_10, DA830_EMA_A_11,
+ DA830_EMA_A_12, DA830_EMA_BA_0, DA830_EMA_BA_1, DA830_NEMA_WE,
+ DA830_NEMA_CS_2, DA830_NEMA_CS_3, DA830_NEMA_OE, DA830_EMA_WAIT_0,
+ -1
+};
+
+#if defined(CONFIG_MMC_DAVINCI) || defined(CONFIG_MMC_DAVINCI_MODULE)
+#define HAS_MMC 1
+#else
+#define HAS_MMC 0
+#endif
+
+#ifdef CONFIG_DA830_UI_NAND
+static struct mtd_partition da830_evm_nand_partitions[] = {
+ /* bootloader (U-Boot, etc) in first sector */
+ [0] = {
+ .name = "bootloader",
+ .offset = 0,
+ .size = SZ_128K,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ /* bootloader params in the next sector */
+ [1] = {
+ .name = "params",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_128K,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ /* kernel */
+ [2] = {
+ .name = "kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_2M,
+ .mask_flags = 0,
+ },
+ /* file system */
+ [3] = {
+ .name = "filesystem",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ .mask_flags = 0,
+ }
+};
+
+/* flash bbt decriptors */
+static uint8_t da830_evm_nand_bbt_pattern[] = { 'B', 'b', 't', '0' };
+static uint8_t da830_evm_nand_mirror_pattern[] = { '1', 't', 'b', 'B' };
+
+static struct nand_bbt_descr da830_evm_nand_bbt_main_descr = {
+ .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE |
+ NAND_BBT_WRITE | NAND_BBT_2BIT |
+ NAND_BBT_VERSION | NAND_BBT_PERCHIP,
+ .offs = 2,
+ .len = 4,
+ .veroffs = 16,
+ .maxblocks = 4,
+ .pattern = da830_evm_nand_bbt_pattern
+};
+
+static struct nand_bbt_descr da830_evm_nand_bbt_mirror_descr = {
+ .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE |
+ NAND_BBT_WRITE | NAND_BBT_2BIT |
+ NAND_BBT_VERSION | NAND_BBT_PERCHIP,
+ .offs = 2,
+ .len = 4,
+ .veroffs = 16,
+ .maxblocks = 4,
+ .pattern = da830_evm_nand_mirror_pattern
+};
+
+static struct davinci_nand_pdata da830_evm_nand_pdata = {
+ .parts = da830_evm_nand_partitions,
+ .nr_parts = ARRAY_SIZE(da830_evm_nand_partitions),
+ .ecc_mode = NAND_ECC_HW,
+ .ecc_bits = 4,
+ .options = NAND_USE_FLASH_BBT,
+ .bbt_td = &da830_evm_nand_bbt_main_descr,
+ .bbt_md = &da830_evm_nand_bbt_mirror_descr,
+};
+
+static struct resource da830_evm_nand_resources[] = {
+ [0] = { /* First memory resource is NAND I/O window */
+ .start = DA830_EMIF25_ASYNC_DATA_CE3_BASE,
+ .end = DA830_EMIF25_ASYNC_DATA_CE3_BASE + PAGE_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = { /* Second memory resource is AEMIF control registers */
+ .start = DA830_EMIF25_CONTROL_BASE,
+ .end = DA830_EMIF25_CONTROL_BASE + SZ_32K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device da830_evm_nand_device = {
+ .name = "davinci_nand",
+ .id = 1,
+ .dev = {
+ .platform_data = &da830_evm_nand_pdata,
+ },
+ .num_resources = ARRAY_SIZE(da830_evm_nand_resources),
+ .resource = da830_evm_nand_resources,
+};
+
+static inline void da830_evm_init_nand(int mux_mode)
+{
+ int ret;
+
+ if (HAS_MMC) {
+ pr_warning("WARNING: both MMC/SD and NAND are "
+ "enabled, but they share AEMIF pins.\n"
+ "\tDisable MMC/SD for NAND support.\n");
+ return;
+ }
+
+ ret = da8xx_pinmux_setup(da830_evm_emif25_pins);
+ if (ret)
+ pr_warning("da830_evm_init: emif25 mux setup failed: %d\n",
+ ret);
+
+ ret = platform_device_register(&da830_evm_nand_device);
+ if (ret)
+ pr_warning("da830_evm_init: NAND device not registered.\n");
+
+ gpio_direction_output(mux_mode, 1);
+}
+#else
+static inline void da830_evm_init_nand(int mux_mode) { }
+#endif
+
+#ifdef CONFIG_DA830_UI_LCD
+static inline void da830_evm_init_lcdc(int mux_mode)
+{
+ int ret;
+
+ ret = da8xx_pinmux_setup(da830_lcdcntl_pins);
+ if (ret)
+ pr_warning("da830_evm_init: lcdcntl mux setup failed: %d\n",
+ ret);
+
+ ret = da8xx_register_lcdc(&sharp_lcd035q3dg01_pdata);
+ if (ret)
+ pr_warning("da830_evm_init: lcd setup failed: %d\n", ret);
+
+ gpio_direction_output(mux_mode, 0);
+}
+#else
+static inline void da830_evm_init_lcdc(int mux_mode) { }
+#endif
+
+static struct at24_platform_data da830_evm_i2c_eeprom_info = {
+ .byte_len = SZ_256K / 8,
+ .page_size = 64,
+ .flags = AT24_FLAG_ADDR16,
+ .setup = davinci_get_mac_addr,
+ .context = (void *)0x7f00,
+};
+
+static int __init da830_evm_ui_expander_setup(struct i2c_client *client,
+ int gpio, unsigned ngpio, void *context)
+{
+ gpio_request(gpio + 6, "UI MUX_MODE");
+
+ /* Drive mux mode low to match the default without UI card */
+ gpio_direction_output(gpio + 6, 0);
+
+ da830_evm_init_lcdc(gpio + 6);
+
+ da830_evm_init_nand(gpio + 6);
+
+ return 0;
+}
+
+static int da830_evm_ui_expander_teardown(struct i2c_client *client, int gpio,
+ unsigned ngpio, void *context)
+{
+ gpio_free(gpio + 6);
+ return 0;
+}
+
+static struct pcf857x_platform_data __initdata da830_evm_ui_expander_info = {
+ .gpio_base = DAVINCI_N_GPIO,
+ .setup = da830_evm_ui_expander_setup,
+ .teardown = da830_evm_ui_expander_teardown,
+};
+
+static struct i2c_board_info __initdata da830_evm_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("24c256", 0x50),
+ .platform_data = &da830_evm_i2c_eeprom_info,
+ },
+ {
+ I2C_BOARD_INFO("tlv320aic3x", 0x18),
+ },
+ {
+ I2C_BOARD_INFO("pcf8574", 0x3f),
+ .platform_data = &da830_evm_ui_expander_info,
+ },
+};
+
+static struct davinci_i2c_platform_data da830_evm_i2c_0_pdata = {
+ .bus_freq = 100, /* kHz */
+ .bus_delay = 0, /* usec */
+};
+
static __init void da830_evm_init(void)
{
struct davinci_soc_info *soc_info = &davinci_soc_info;
@@ -94,6 +502,8 @@
pr_warning("da830_evm_init: i2c0 registration failed: %d\n",
ret);
+ da830_evm_usb_init();
+
soc_info->emac_pdata->phy_mask = DA830_EVM_PHY_MASK;
soc_info->emac_pdata->mdio_max_freq = DA830_EVM_MDIO_FREQUENCY;
soc_info->emac_pdata->rmii_en = 1;
@@ -117,12 +527,18 @@
i2c_register_board_info(1, da830_evm_i2c_devices,
ARRAY_SIZE(da830_evm_i2c_devices));
- ret = da8xx_pinmux_setup(da830_mcasp1_pins);
+ ret = da8xx_pinmux_setup(da830_evm_mcasp1_pins);
if (ret)
pr_warning("da830_evm_init: mcasp1 mux setup failed: %d\n",
ret);
- da8xx_init_mcasp(1, &da830_evm_snd_data);
+ da8xx_register_mcasp(1, &da830_evm_snd_data);
+
+ da830_evm_init_mmc();
+
+ ret = da8xx_register_rtc();
+ if (ret)
+ pr_warning("da830_evm_init: rtc setup failed: %d\n", ret);
}
#ifdef CONFIG_SERIAL_8250_CONSOLE
@@ -146,7 +562,7 @@
da830_init();
}
-MACHINE_START(DAVINCI_DA830_EVM, "DaVinci DA830/OMAP L137 EVM")
+MACHINE_START(DAVINCI_DA830_EVM, "DaVinci DA830/OMAP-L137 EVM")
.phys_io = IO_PHYS,
.io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
.boot_params = (DA8XX_DDR_BASE + 0x100),
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index c759d72..62b98bf 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -12,36 +12,38 @@
* or implied.
*/
#include <linux/kernel.h>
-#include <linux/module.h>
#include <linux/init.h>
#include <linux/console.h>
#include <linux/i2c.h>
#include <linux/i2c/at24.h>
+#include <linux/i2c/pca953x.h>
#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
+#include <linux/regulator/machine.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <mach/common.h>
-#include <mach/irqs.h>
#include <mach/cp_intc.h>
#include <mach/da8xx.h>
#include <mach/nand.h>
+#include <mach/mux.h>
#define DA850_EVM_PHY_MASK 0x1
#define DA850_EVM_MDIO_FREQUENCY 2200000 /* PHY bus frequency */
+#define DA850_LCD_PWR_PIN GPIO_TO_PIN(2, 8)
#define DA850_LCD_BL_PIN GPIO_TO_PIN(2, 15)
-#define DA850_LCD_PWR_PIN GPIO_TO_PIN(8, 10)
#define DA850_MMCSD_CD_PIN GPIO_TO_PIN(4, 0)
#define DA850_MMCSD_WP_PIN GPIO_TO_PIN(4, 1)
+#define DA850_MII_MDIO_CLKEN_PIN GPIO_TO_PIN(2, 6)
+
static struct mtd_partition da850_evm_norflash_partition[] = {
{
.name = "NOR filesystem",
@@ -143,10 +145,149 @@
.resource = da850_evm_nandflash_resource,
};
+static struct platform_device *da850_evm_devices[] __initdata = {
+ &da850_evm_nandflash_device,
+ &da850_evm_norflash_device,
+};
+
+#define DA8XX_AEMIF_CE2CFG_OFFSET 0x10
+#define DA8XX_AEMIF_ASIZE_16BIT 0x1
+
+static void __init da850_evm_init_nor(void)
+{
+ void __iomem *aemif_addr;
+
+ aemif_addr = ioremap(DA8XX_AEMIF_CTL_BASE, SZ_32K);
+
+ /* Configure data bus width of CS2 to 16 bit */
+ writel(readl(aemif_addr + DA8XX_AEMIF_CE2CFG_OFFSET) |
+ DA8XX_AEMIF_ASIZE_16BIT,
+ aemif_addr + DA8XX_AEMIF_CE2CFG_OFFSET);
+
+ iounmap(aemif_addr);
+}
+
+static u32 ui_card_detected;
+
+#if defined(CONFIG_MMC_DAVINCI) || \
+ defined(CONFIG_MMC_DAVINCI_MODULE)
+#define HAS_MMC 1
+#else
+#define HAS_MMC 0
+#endif
+
+static __init void da850_evm_setup_nor_nand(void)
+{
+ int ret = 0;
+
+ if (ui_card_detected & !HAS_MMC) {
+ ret = da8xx_pinmux_setup(da850_nand_pins);
+ if (ret)
+ pr_warning("da850_evm_init: nand mux setup failed: "
+ "%d\n", ret);
+
+ ret = da8xx_pinmux_setup(da850_nor_pins);
+ if (ret)
+ pr_warning("da850_evm_init: nor mux setup failed: %d\n",
+ ret);
+
+ da850_evm_init_nor();
+
+ platform_add_devices(da850_evm_devices,
+ ARRAY_SIZE(da850_evm_devices));
+ }
+}
+
+#ifdef CONFIG_DA850_UI_RMII
+static inline void da850_evm_setup_emac_rmii(int rmii_sel)
+{
+ struct davinci_soc_info *soc_info = &davinci_soc_info;
+
+ soc_info->emac_pdata->rmii_en = 1;
+ gpio_set_value(rmii_sel, 0);
+}
+#else
+static inline void da850_evm_setup_emac_rmii(int rmii_sel) { }
+#endif
+
+static int da850_evm_ui_expander_setup(struct i2c_client *client, unsigned gpio,
+ unsigned ngpio, void *c)
+{
+ int sel_a, sel_b, sel_c, ret;
+
+ sel_a = gpio + 7;
+ sel_b = gpio + 6;
+ sel_c = gpio + 5;
+
+ ret = gpio_request(sel_a, "sel_a");
+ if (ret) {
+ pr_warning("Cannot open UI expander pin %d\n", sel_a);
+ goto exp_setup_sela_fail;
+ }
+
+ ret = gpio_request(sel_b, "sel_b");
+ if (ret) {
+ pr_warning("Cannot open UI expander pin %d\n", sel_b);
+ goto exp_setup_selb_fail;
+ }
+
+ ret = gpio_request(sel_c, "sel_c");
+ if (ret) {
+ pr_warning("Cannot open UI expander pin %d\n", sel_c);
+ goto exp_setup_selc_fail;
+ }
+
+ /* deselect all functionalities */
+ gpio_direction_output(sel_a, 1);
+ gpio_direction_output(sel_b, 1);
+ gpio_direction_output(sel_c, 1);
+
+ ui_card_detected = 1;
+ pr_info("DA850/OMAP-L138 EVM UI card detected\n");
+
+ da850_evm_setup_nor_nand();
+
+ da850_evm_setup_emac_rmii(sel_a);
+
+ return 0;
+
+exp_setup_selc_fail:
+ gpio_free(sel_b);
+exp_setup_selb_fail:
+ gpio_free(sel_a);
+exp_setup_sela_fail:
+ return ret;
+}
+
+static int da850_evm_ui_expander_teardown(struct i2c_client *client,
+ unsigned gpio, unsigned ngpio, void *c)
+{
+ /* deselect all functionalities */
+ gpio_set_value(gpio + 5, 1);
+ gpio_set_value(gpio + 6, 1);
+ gpio_set_value(gpio + 7, 1);
+
+ gpio_free(gpio + 5);
+ gpio_free(gpio + 6);
+ gpio_free(gpio + 7);
+
+ return 0;
+}
+
+static struct pca953x_platform_data da850_evm_ui_expander_info = {
+ .gpio_base = DAVINCI_N_GPIO,
+ .setup = da850_evm_ui_expander_setup,
+ .teardown = da850_evm_ui_expander_teardown,
+};
+
static struct i2c_board_info __initdata da850_evm_i2c_devices[] = {
{
I2C_BOARD_INFO("tlv320aic3x", 0x18),
- }
+ },
+ {
+ I2C_BOARD_INFO("tca6416", 0x20),
+ .platform_data = &da850_evm_ui_expander_info,
+ },
};
static struct davinci_i2c_platform_data da850_evm_i2c_0_pdata = {
@@ -158,11 +299,6 @@
.enabled_uarts = 0x7,
};
-static struct platform_device *da850_evm_devices[] __initdata = {
- &da850_evm_nandflash_device,
- &da850_evm_norflash_device,
-};
-
/* davinci da850 evm audio machine driver */
static u8 da850_iis_serializer_direction[] = {
INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE,
@@ -198,6 +334,8 @@
.get_ro = da850_evm_mmc_get_ro,
.get_cd = da850_evm_mmc_get_cd,
.wires = 4,
+ .max_freq = 50000000,
+ .caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
.version = MMC_CTLR_VERSION_2,
};
@@ -233,57 +371,228 @@
return 0;
}
-#define DA8XX_AEMIF_CE2CFG_OFFSET 0x10
-#define DA8XX_AEMIF_ASIZE_16BIT 0x1
+/* TPS65070 voltage regulator support */
-static void __init da850_evm_init_nor(void)
+/* 3.3V */
+struct regulator_consumer_supply tps65070_dcdc1_consumers[] = {
+ {
+ .supply = "usb0_vdda33",
+ },
+ {
+ .supply = "usb1_vdda33",
+ },
+};
+
+/* 3.3V or 1.8V */
+struct regulator_consumer_supply tps65070_dcdc2_consumers[] = {
+ {
+ .supply = "dvdd3318_a",
+ },
+ {
+ .supply = "dvdd3318_b",
+ },
+ {
+ .supply = "dvdd3318_c",
+ },
+};
+
+/* 1.2V */
+struct regulator_consumer_supply tps65070_dcdc3_consumers[] = {
+ {
+ .supply = "cvdd",
+ },
+};
+
+/* 1.8V LDO */
+struct regulator_consumer_supply tps65070_ldo1_consumers[] = {
+ {
+ .supply = "sata_vddr",
+ },
+ {
+ .supply = "usb0_vdda18",
+ },
+ {
+ .supply = "usb1_vdda18",
+ },
+ {
+ .supply = "ddr_dvdd18",
+ },
+};
+
+/* 1.2V LDO */
+struct regulator_consumer_supply tps65070_ldo2_consumers[] = {
+ {
+ .supply = "sata_vdd",
+ },
+ {
+ .supply = "pll0_vdda",
+ },
+ {
+ .supply = "pll1_vdda",
+ },
+ {
+ .supply = "usbs_cvdd",
+ },
+ {
+ .supply = "vddarnwa1",
+ },
+};
+
+struct regulator_init_data tps65070_regulator_data[] = {
+ /* dcdc1 */
+ {
+ .constraints = {
+ .min_uV = 3150000,
+ .max_uV = 3450000,
+ .valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_STATUS),
+ .boot_on = 1,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(tps65070_dcdc1_consumers),
+ .consumer_supplies = tps65070_dcdc1_consumers,
+ },
+
+ /* dcdc2 */
+ {
+ .constraints = {
+ .min_uV = 1710000,
+ .max_uV = 3450000,
+ .valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_STATUS),
+ .boot_on = 1,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(tps65070_dcdc2_consumers),
+ .consumer_supplies = tps65070_dcdc2_consumers,
+ },
+
+ /* dcdc3 */
+ {
+ .constraints = {
+ .min_uV = 950000,
+ .max_uV = 1320000,
+ .valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_STATUS),
+ .boot_on = 1,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(tps65070_dcdc3_consumers),
+ .consumer_supplies = tps65070_dcdc3_consumers,
+ },
+
+ /* ldo1 */
+ {
+ .constraints = {
+ .min_uV = 1710000,
+ .max_uV = 1890000,
+ .valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_STATUS),
+ .boot_on = 1,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(tps65070_ldo1_consumers),
+ .consumer_supplies = tps65070_ldo1_consumers,
+ },
+
+ /* ldo2 */
+ {
+ .constraints = {
+ .min_uV = 1140000,
+ .max_uV = 1320000,
+ .valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_STATUS),
+ .boot_on = 1,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(tps65070_ldo2_consumers),
+ .consumer_supplies = tps65070_ldo2_consumers,
+ },
+};
+
+static struct i2c_board_info __initdata da850evm_tps65070_info[] = {
+ {
+ I2C_BOARD_INFO("tps6507x", 0x48),
+ .platform_data = &tps65070_regulator_data[0],
+ },
+};
+
+static int __init pmic_tps65070_init(void)
{
- void __iomem *aemif_addr;
-
- aemif_addr = ioremap(DA8XX_AEMIF_CTL_BASE, SZ_32K);
-
- /* Configure data bus width of CS2 to 16 bit */
- writel(readl(aemif_addr + DA8XX_AEMIF_CE2CFG_OFFSET) |
- DA8XX_AEMIF_ASIZE_16BIT,
- aemif_addr + DA8XX_AEMIF_CE2CFG_OFFSET);
-
- iounmap(aemif_addr);
+ return i2c_register_board_info(1, da850evm_tps65070_info,
+ ARRAY_SIZE(da850evm_tps65070_info));
}
-#if defined(CONFIG_MTD_PHYSMAP) || \
- defined(CONFIG_MTD_PHYSMAP_MODULE)
-#define HAS_NOR 1
-#else
-#define HAS_NOR 0
-#endif
+static const short da850_evm_lcdc_pins[] = {
+ DA850_GPIO2_8, DA850_GPIO2_15,
+ -1
+};
-#if defined(CONFIG_MMC_DAVINCI) || \
- defined(CONFIG_MMC_DAVINCI_MODULE)
-#define HAS_MMC 1
-#else
-#define HAS_MMC 0
-#endif
+static int __init da850_evm_config_emac(void)
+{
+ void __iomem *cfg_chip3_base;
+ int ret;
+ u32 val;
+ struct davinci_soc_info *soc_info = &davinci_soc_info;
+ u8 rmii_en = soc_info->emac_pdata->rmii_en;
+
+ if (!machine_is_davinci_da850_evm())
+ return 0;
+
+ cfg_chip3_base = DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP3_REG);
+
+ val = __raw_readl(cfg_chip3_base);
+
+ if (rmii_en) {
+ val |= BIT(8);
+ ret = da8xx_pinmux_setup(da850_rmii_pins);
+ pr_info("EMAC: RMII PHY configured, MII PHY will not be"
+ " functional\n");
+ } else {
+ val &= ~BIT(8);
+ ret = da8xx_pinmux_setup(da850_cpgmac_pins);
+ pr_info("EMAC: MII PHY configured, RMII PHY will not be"
+ " functional\n");
+ }
+
+ if (ret)
+ pr_warning("da850_evm_init: cpgmac/rmii mux setup failed: %d\n",
+ ret);
+
+ /* configure the CFGCHIP3 register for RMII or MII */
+ __raw_writel(val, cfg_chip3_base);
+
+ ret = davinci_cfg_reg(DA850_GPIO2_6);
+ if (ret)
+ pr_warning("da850_evm_init:GPIO(2,6) mux setup "
+ "failed\n");
+
+ ret = gpio_request(DA850_MII_MDIO_CLKEN_PIN, "mdio_clk_en");
+ if (ret) {
+ pr_warning("Cannot open GPIO %d\n",
+ DA850_MII_MDIO_CLKEN_PIN);
+ return ret;
+ }
+
+ /* Enable/Disable MII MDIO clock */
+ gpio_direction_output(DA850_MII_MDIO_CLKEN_PIN, rmii_en);
+
+ soc_info->emac_pdata->phy_mask = DA850_EVM_PHY_MASK;
+ soc_info->emac_pdata->mdio_max_freq = DA850_EVM_MDIO_FREQUENCY;
+
+ ret = da8xx_register_emac();
+ if (ret)
+ pr_warning("da850_evm_init: emac registration failed: %d\n",
+ ret);
+
+ return 0;
+}
+device_initcall(da850_evm_config_emac);
static __init void da850_evm_init(void)
{
- struct davinci_soc_info *soc_info = &davinci_soc_info;
int ret;
- ret = da8xx_pinmux_setup(da850_nand_pins);
+ ret = pmic_tps65070_init();
if (ret)
- pr_warning("da850_evm_init: nand mux setup failed: %d\n",
+ pr_warning("da850_evm_init: TPS65070 PMIC init failed: %d\n",
ret);
- ret = da8xx_pinmux_setup(da850_nor_pins);
- if (ret)
- pr_warning("da850_evm_init: nor mux setup failed: %d\n",
- ret);
-
- da850_evm_init_nor();
-
- platform_add_devices(da850_evm_devices,
- ARRAY_SIZE(da850_evm_devices));
-
ret = da8xx_register_edma();
if (ret)
pr_warning("da850_evm_init: edma registration failed: %d\n",
@@ -299,19 +608,6 @@
pr_warning("da850_evm_init: i2c0 registration failed: %d\n",
ret);
- soc_info->emac_pdata->phy_mask = DA850_EVM_PHY_MASK;
- soc_info->emac_pdata->mdio_max_freq = DA850_EVM_MDIO_FREQUENCY;
- soc_info->emac_pdata->rmii_en = 0;
-
- ret = da8xx_pinmux_setup(da850_cpgmac_pins);
- if (ret)
- pr_warning("da850_evm_init: cpgmac mux setup failed: %d\n",
- ret);
-
- ret = da8xx_register_emac();
- if (ret)
- pr_warning("da850_evm_init: emac registration failed: %d\n",
- ret);
ret = da8xx_register_watchdog();
if (ret)
@@ -319,11 +615,6 @@
ret);
if (HAS_MMC) {
- if (HAS_NOR)
- pr_warning("WARNING: both NOR Flash and MMC/SD are "
- "enabled, but they share AEMIF pins.\n"
- "\tDisable one of them.\n");
-
ret = da8xx_pinmux_setup(da850_mmcsd0_pins);
if (ret)
pr_warning("da850_evm_init: mmcsd0 mux setup failed:"
@@ -365,22 +656,42 @@
pr_warning("da850_evm_init: mcasp mux setup failed: %d\n",
ret);
- da8xx_init_mcasp(0, &da850_evm_snd_data);
+ da8xx_register_mcasp(0, &da850_evm_snd_data);
ret = da8xx_pinmux_setup(da850_lcdcntl_pins);
if (ret)
pr_warning("da850_evm_init: lcdcntl mux setup failed: %d\n",
ret);
+ /* Handle board specific muxing for LCD here */
+ ret = da8xx_pinmux_setup(da850_evm_lcdc_pins);
+ if (ret)
+ pr_warning("da850_evm_init: evm specific lcd mux setup "
+ "failed: %d\n", ret);
+
ret = da850_lcd_hw_init();
if (ret)
pr_warning("da850_evm_init: lcd initialization failed: %d\n",
ret);
- ret = da8xx_register_lcdc();
+ ret = da8xx_register_lcdc(&sharp_lk043t1dg01_pdata);
if (ret)
pr_warning("da850_evm_init: lcdc registration failed: %d\n",
ret);
+
+ ret = da8xx_register_rtc();
+ if (ret)
+ pr_warning("da850_evm_init: rtc setup failed: %d\n", ret);
+
+ ret = da850_register_cpufreq();
+ if (ret)
+ pr_warning("da850_evm_init: cpufreq registration failed: %d\n",
+ ret);
+
+ ret = da8xx_register_cpuidle();
+ if (ret)
+ pr_warning("da850_evm_init: cpuidle registration failed: %d\n",
+ ret);
}
#ifdef CONFIG_SERIAL_8250_CONSOLE
diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
index 77e8067..a9b650d 100644
--- a/arch/arm/mach-davinci/board-dm355-evm.c
+++ b/arch/arm/mach-davinci/board-dm355-evm.c
@@ -9,15 +9,13 @@
* or implied.
*/
#include <linux/kernel.h>
-#include <linux/module.h>
#include <linux/init.h>
-#include <linux/dma-mapping.h>
+#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/nand.h>
#include <linux/i2c.h>
-#include <linux/io.h>
#include <linux/gpio.h>
#include <linux/clk.h>
#include <linux/videodev2.h>
@@ -25,20 +23,15 @@
#include <linux/spi/spi.h>
#include <linux/spi/eeprom.h>
-#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/flash.h>
-#include <mach/hardware.h>
#include <mach/dm355.h>
-#include <mach/psc.h>
-#include <mach/common.h>
#include <mach/i2c.h>
#include <mach/serial.h>
#include <mach/nand.h>
#include <mach/mmc.h>
+#include <mach/usb.h>
#define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x01e10000
#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000
@@ -86,8 +79,9 @@
.mask_chipsel = BIT(14),
.parts = davinci_nand_partitions,
.nr_parts = ARRAY_SIZE(davinci_nand_partitions),
- .ecc_mode = NAND_ECC_HW_SYNDROME,
+ .ecc_mode = NAND_ECC_HW,
.options = NAND_USE_FLASH_BBT,
+ .ecc_bits = 4,
};
static struct resource davinci_nand_resources[] = {
@@ -344,7 +338,7 @@
gpio_request(2, "usb_id_toggle");
gpio_direction_output(2, USB_ID_VALUE);
/* irlml6401 switches over 1A in under 8 msec */
- setup_usb(500, 8);
+ davinci_setup_usb(1000, 8);
davinci_setup_mmc(0, &dm355evm_mmc_config);
davinci_setup_mmc(1, &dm355evm_mmc_config);
diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c
index 84ad5d1..21f32eb 100644
--- a/arch/arm/mach-davinci/board-dm355-leopard.c
+++ b/arch/arm/mach-davinci/board-dm355-leopard.c
@@ -8,34 +8,27 @@
* warranty of any kind, whether express or implied.
*/
#include <linux/kernel.h>
-#include <linux/module.h>
#include <linux/init.h>
-#include <linux/dma-mapping.h>
+#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/nand.h>
#include <linux/i2c.h>
-#include <linux/io.h>
#include <linux/gpio.h>
#include <linux/clk.h>
#include <linux/spi/spi.h>
#include <linux/spi/eeprom.h>
-#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/flash.h>
-#include <mach/hardware.h>
#include <mach/dm355.h>
-#include <mach/psc.h>
-#include <mach/common.h>
#include <mach/i2c.h>
#include <mach/serial.h>
#include <mach/nand.h>
#include <mach/mmc.h>
+#include <mach/usb.h>
#define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x01e10000
#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000
@@ -270,7 +263,7 @@
gpio_request(2, "usb_id_toggle");
gpio_direction_output(2, USB_ID_VALUE);
/* irlml6401 switches over 1A in under 8 msec */
- setup_usb(500, 8);
+ davinci_setup_usb(1000, 8);
davinci_setup_mmc(0, &dm355leopard_mmc_config);
davinci_setup_mmc(1, &dm355leopard_mmc_config);
diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index 52dd804..289fe1b 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -13,9 +13,8 @@
* GNU General Public License for more details.
*/
#include <linux/kernel.h>
-#include <linux/module.h>
#include <linux/init.h>
-#include <linux/dma-mapping.h>
+#include <linux/err.h>
#include <linux/i2c.h>
#include <linux/io.h>
#include <linux/clk.h>
@@ -24,20 +23,19 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/nand.h>
-#include <asm/setup.h>
+#include <linux/input.h>
+
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
+
#include <mach/mux.h>
-#include <mach/hardware.h>
#include <mach/dm365.h>
-#include <mach/psc.h>
#include <mach/common.h>
#include <mach/i2c.h>
#include <mach/serial.h>
#include <mach/mmc.h>
#include <mach/nand.h>
-
+#include <mach/keyscan.h>
static inline int have_imager(void)
{
@@ -144,6 +142,7 @@
.nr_parts = ARRAY_SIZE(davinci_nand_partitions),
.ecc_mode = NAND_ECC_HW,
.options = NAND_USE_FLASH_BBT,
+ .ecc_bits = 4,
};
static struct resource davinci_nand_resources[] = {
@@ -176,11 +175,16 @@
.context = (void *)0x7f00,
};
+static struct snd_platform_data dm365_evm_snd_data;
+
static struct i2c_board_info i2c_info[] = {
{
I2C_BOARD_INFO("24c256", 0x50),
.platform_data = &eeprom_info,
},
+ {
+ I2C_BOARD_INFO("tlv320aic3x", 0x18),
+ },
};
static struct davinci_i2c_platform_data i2c_pdata = {
@@ -188,6 +192,38 @@
.bus_delay = 0 /* usec */,
};
+#ifdef CONFIG_KEYBOARD_DAVINCI
+static unsigned short dm365evm_keymap[] = {
+ KEY_KP2,
+ KEY_LEFT,
+ KEY_EXIT,
+ KEY_DOWN,
+ KEY_ENTER,
+ KEY_UP,
+ KEY_KP1,
+ KEY_RIGHT,
+ KEY_MENU,
+ KEY_RECORD,
+ KEY_REWIND,
+ KEY_KPMINUS,
+ KEY_STOP,
+ KEY_FASTFORWARD,
+ KEY_KPPLUS,
+ KEY_PLAYPAUSE,
+ 0
+};
+
+static struct davinci_ks_platform_data dm365evm_ks_data = {
+ .keymap = dm365evm_keymap,
+ .keymapsize = ARRAY_SIZE(dm365evm_keymap),
+ .rep = 1,
+ /* Scan period = strobe + interval */
+ .strobe = 0x5,
+ .interval = 0x2,
+ .matrix_type = DAVINCI_KEYSCAN_MATRIX_4X4,
+};
+#endif
+
static int cpld_mmc_get_cd(int module)
{
if (!cpld)
@@ -472,6 +508,13 @@
/* maybe setup mmc1/etc ... _after_ mmc0 */
evm_init_cpld();
+
+ dm365_init_asp(&dm365_evm_snd_data);
+ dm365_init_rtc();
+
+#ifdef CONFIG_KEYBOARD_DAVINCI
+ dm365_init_ks(&dm365evm_ks_data);
+#endif
}
static __init void dm365_evm_irq_init(void)
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index 1213a00..fd0398b 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -9,45 +9,34 @@
* or implied.
*/
#include <linux/kernel.h>
-#include <linux/module.h>
#include <linux/init.h>
#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/memory.h>
-
#include <linux/i2c.h>
#include <linux/i2c/pcf857x.h>
#include <linux/i2c/at24.h>
-#include <linux/etherdevice.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
-#include <linux/io.h>
#include <linux/phy.h>
#include <linux/clk.h>
#include <linux/videodev2.h>
#include <media/tvp514x.h>
-#include <asm/setup.h>
#include <asm/mach-types.h>
-
#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/flash.h>
#include <mach/dm644x.h>
#include <mach/common.h>
#include <mach/i2c.h>
#include <mach/serial.h>
#include <mach/mux.h>
-#include <mach/psc.h>
#include <mach/nand.h>
#include <mach/mmc.h>
-#include <mach/emac.h>
+#include <mach/usb.h>
#define DM644X_EVM_PHY_MASK (0x2)
#define DM644X_EVM_MDIO_FREQUENCY (2200000) /* PHY bus frequency */
@@ -477,7 +466,7 @@
/* irlml6401 switches over 1A, in under 8 msec;
* now it can be managed by nDRV_VBUS ...
*/
- setup_usb(500, 8);
+ davinci_setup_usb(1000, 8);
return 0;
}
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index 24e0e13..8d0b0e0 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -17,38 +17,28 @@
**************************************************************************/
#include <linux/kernel.h>
-#include <linux/module.h>
#include <linux/init.h>
-#include <linux/fs.h>
-#include <linux/major.h>
-#include <linux/root_dev.h>
-#include <linux/dma-mapping.h>
-#include <linux/serial.h>
-#include <linux/serial_8250.h>
#include <linux/leds.h>
#include <linux/gpio.h>
-#include <linux/io.h>
#include <linux/platform_device.h>
#include <linux/i2c.h>
#include <linux/i2c/at24.h>
#include <linux/i2c/pcf857x.h>
-#include <linux/etherdevice.h>
#include <media/tvp514x.h>
-#include <asm/setup.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/flash.h>
#include <mach/dm646x.h>
#include <mach/common.h>
-#include <mach/psc.h>
#include <mach/serial.h>
#include <mach/i2c.h>
-#include <mach/mmc.h>
-#include <mach/emac.h>
+#include <mach/nand.h>
#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE)
@@ -57,6 +47,11 @@
#define HAS_ATA 0
#endif
+#define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x20008000
+#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x42000000
+
+#define NAND_BLOCK_SIZE SZ_128K
+
/* CPLD Register 0 bits to control ATA */
#define DM646X_EVM_ATA_RST BIT(0)
#define DM646X_EVM_ATA_PWD BIT(1)
@@ -92,6 +87,63 @@
.enabled_uarts = (1 << 0),
};
+/* Note: We are setting first partition as 'bootloader' constituting UBL, U-Boot
+ * and U-Boot environment this avoids dependency on any particular combination
+ * of UBL, U-Boot or flashing tools etc.
+ */
+static struct mtd_partition davinci_nand_partitions[] = {
+ {
+ /* UBL, U-Boot with environment */
+ .name = "bootloader",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 16 * NAND_BLOCK_SIZE,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ }, {
+ .name = "kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_4M,
+ .mask_flags = 0,
+ }, {
+ .name = "filesystem",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ .mask_flags = 0,
+ }
+};
+
+static struct davinci_nand_pdata davinci_nand_data = {
+ .mask_cle = 0x80000,
+ .mask_ale = 0x40000,
+ .parts = davinci_nand_partitions,
+ .nr_parts = ARRAY_SIZE(davinci_nand_partitions),
+ .ecc_mode = NAND_ECC_HW,
+ .options = 0,
+};
+
+static struct resource davinci_nand_resources[] = {
+ {
+ .start = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE,
+ .end = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_32M - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = DAVINCI_ASYNC_EMIF_CONTROL_BASE,
+ .end = DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device davinci_nand_device = {
+ .name = "davinci_nand",
+ .id = 0,
+
+ .num_resources = ARRAY_SIZE(davinci_nand_resources),
+ .resource = davinci_nand_resources,
+
+ .dev = {
+ .platform_data = &davinci_nand_data,
+ },
+};
+
/* CPLD Register 0 Client: used for I/O Control */
static int cpld_reg0_probe(struct i2c_client *client,
const struct i2c_device_id *id)
@@ -142,7 +194,7 @@
{ .name = "DS4", .active_low = 1, },
};
-static __initconst struct gpio_led_platform_data evm_led_data = {
+static const struct gpio_led_platform_data evm_led_data = {
.num_leds = ARRAY_SIZE(evm_leds),
.leds = evm_leds,
};
@@ -647,6 +699,8 @@
dm646x_init_mcasp0(&dm646x_evm_snd_data[0]);
dm646x_init_mcasp1(&dm646x_evm_snd_data[1]);
+ platform_device_register(&davinci_nand_device);
+
if (HAS_ATA)
dm646x_init_ide();
diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c
new file mode 100644
index 0000000..bd9ca07
--- /dev/null
+++ b/arch/arm/mach-davinci/board-neuros-osd2.c
@@ -0,0 +1,323 @@
+/*
+ * Neuros Technologies OSD2 board support
+ *
+ * Modified from original 644X-EVM board support.
+ * 2008 (c) Neuros Technology, LLC.
+ * 2009 (c) Jorge Luis Zapata Muga <jorgeluis.zapata@gmail.com>
+ * 2009 (c) Andrey A. Porodko <Andrey.Porodko@gmail.com>
+ *
+ * The Neuros OSD 2.0 is the hardware component of the Neuros Open
+ * Internet Television Platform. Hardware is very close to TI
+ * DM644X-EVM board. It has:
+ * DM6446M02 module with 256MB NAND, 256MB RAM, TLV320AIC32 AIC,
+ * USB, Ethernet, SD/MMC, UART, THS8200, TVP7000 for video.
+ * Additionaly realtime clock, IR remote control receiver,
+ * IR Blaster based on MSP430 (firmware although is different
+ * from used in DM644X-EVM), internal ATA-6 3.5” HDD drive
+ * with PATA interface, two muxed red-green leds.
+ *
+ * For more information please refer to
+ * http://wiki.neurostechnology.com/index.php/OSD_2.0_HD
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/dm644x.h>
+#include <mach/i2c.h>
+#include <mach/serial.h>
+#include <mach/mux.h>
+#include <mach/nand.h>
+#include <mach/mmc.h>
+#include <mach/usb.h>
+
+#define NEUROS_OSD2_PHY_MASK 0x2
+#define NEUROS_OSD2_MDIO_FREQUENCY 2200000 /* PHY bus frequency */
+
+#define DAVINCI_CFC_ATA_BASE 0x01C66000
+
+#define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x01e00000
+#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000
+
+#define LXT971_PHY_ID 0x001378e2
+#define LXT971_PHY_MASK 0xfffffff0
+
+#define NTOSD2_AUDIOSOC_I2C_ADDR 0x18
+#define NTOSD2_MSP430_I2C_ADDR 0x59
+#define NTOSD2_MSP430_IRQ 2
+
+/* Neuros OSD2 has a Samsung 256 MByte NAND flash (Dev ID of 0xAA,
+ * 2048 blocks in the device, 64 pages per block, 2048 bytes per
+ * page.
+ */
+
+#define NAND_BLOCK_SIZE SZ_128K
+
+struct mtd_partition davinci_ntosd2_nandflash_partition[] = {
+ {
+ /* UBL (a few copies) plus U-Boot */
+ .name = "bootloader",
+ .offset = 0,
+ .size = 15 * NAND_BLOCK_SIZE,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ }, {
+ /* U-Boot environment */
+ .name = "params",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 1 * NAND_BLOCK_SIZE,
+ .mask_flags = 0,
+ }, {
+ /* Kernel */
+ .name = "kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_4M,
+ .mask_flags = 0,
+ }, {
+ /* File System */
+ .name = "filesystem",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ .mask_flags = 0,
+ }
+ /* A few blocks at end hold a flash Bad Block Table. */
+};
+
+static struct davinci_nand_pdata davinci_ntosd2_nandflash_data = {
+ .parts = davinci_ntosd2_nandflash_partition,
+ .nr_parts = ARRAY_SIZE(davinci_ntosd2_nandflash_partition),
+ .ecc_mode = NAND_ECC_HW,
+ .options = NAND_USE_FLASH_BBT,
+};
+
+static struct resource davinci_ntosd2_nandflash_resource[] = {
+ {
+ .start = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE,
+ .end = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = DAVINCI_ASYNC_EMIF_CONTROL_BASE,
+ .end = DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device davinci_ntosd2_nandflash_device = {
+ .name = "davinci_nand",
+ .id = 0,
+ .dev = {
+ .platform_data = &davinci_ntosd2_nandflash_data,
+ },
+ .num_resources = ARRAY_SIZE(davinci_ntosd2_nandflash_resource),
+ .resource = davinci_ntosd2_nandflash_resource,
+};
+
+static u64 davinci_fb_dma_mask = DMA_BIT_MASK(32);
+
+static struct platform_device davinci_fb_device = {
+ .name = "davincifb",
+ .id = -1,
+ .dev = {
+ .dma_mask = &davinci_fb_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .num_resources = 0,
+};
+
+static struct resource ide_resources[] = {
+ {
+ .start = DAVINCI_CFC_ATA_BASE,
+ .end = DAVINCI_CFC_ATA_BASE + 0x7ff,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_IDE,
+ .end = IRQ_IDE,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static u64 ide_dma_mask = DMA_BIT_MASK(32);
+
+static struct platform_device ide_dev = {
+ .name = "palm_bk3710",
+ .id = -1,
+ .resource = ide_resources,
+ .num_resources = ARRAY_SIZE(ide_resources),
+ .dev = {
+ .dma_mask = &ide_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
+
+static struct snd_platform_data dm644x_ntosd2_snd_data;
+
+static struct gpio_led ntosd2_leds[] = {
+ { .name = "led1_green", .gpio = GPIO(10), },
+ { .name = "led1_red", .gpio = GPIO(11), },
+ { .name = "led2_green", .gpio = GPIO(12), },
+ { .name = "led2_red", .gpio = GPIO(13), },
+};
+
+static struct gpio_led_platform_data ntosd2_leds_data = {
+ .num_leds = ARRAY_SIZE(ntosd2_leds),
+ .leds = ntosd2_leds,
+};
+
+static struct platform_device ntosd2_leds_dev = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &ntosd2_leds_data,
+ },
+};
+
+
+static struct platform_device *davinci_ntosd2_devices[] __initdata = {
+ &davinci_fb_device,
+ &ntosd2_leds_dev,
+};
+
+static struct davinci_uart_config uart_config __initdata = {
+ .enabled_uarts = (1 << 0),
+};
+
+static void __init davinci_ntosd2_map_io(void)
+{
+ dm644x_init();
+}
+
+/*
+ I2C initialization
+*/
+static struct davinci_i2c_platform_data ntosd2_i2c_pdata = {
+ .bus_freq = 20 /* kHz */,
+ .bus_delay = 100 /* usec */,
+};
+
+static struct i2c_board_info __initdata ntosd2_i2c_info[] = {
+};
+
+static int ntosd2_init_i2c(void)
+{
+ int status;
+
+ davinci_init_i2c(&ntosd2_i2c_pdata);
+ status = gpio_request(NTOSD2_MSP430_IRQ, ntosd2_i2c_info[0].type);
+ if (status == 0) {
+ status = gpio_direction_input(NTOSD2_MSP430_IRQ);
+ if (status == 0) {
+ status = gpio_to_irq(NTOSD2_MSP430_IRQ);
+ if (status > 0) {
+ ntosd2_i2c_info[0].irq = status;
+ i2c_register_board_info(1,
+ ntosd2_i2c_info,
+ ARRAY_SIZE(ntosd2_i2c_info));
+ }
+ }
+ }
+ return status;
+}
+
+static struct davinci_mmc_config davinci_ntosd2_mmc_config = {
+ .wires = 4,
+ .version = MMC_CTLR_VERSION_1
+};
+
+
+#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
+ defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE)
+#define HAS_ATA 1
+#else
+#define HAS_ATA 0
+#endif
+
+#if defined(CONFIG_MTD_NAND_DAVINCI) || \
+ defined(CONFIG_MTD_NAND_DAVINCI_MODULE)
+#define HAS_NAND 1
+#else
+#define HAS_NAND 0
+#endif
+
+static __init void davinci_ntosd2_init(void)
+{
+ struct clk *aemif_clk;
+ struct davinci_soc_info *soc_info = &davinci_soc_info;
+ int status;
+
+ aemif_clk = clk_get(NULL, "aemif");
+ clk_enable(aemif_clk);
+
+ if (HAS_ATA) {
+ if (HAS_NAND)
+ pr_warning("WARNING: both IDE and Flash are "
+ "enabled, but they share AEMIF pins.\n"
+ "\tDisable IDE for NAND/NOR support.\n");
+ davinci_cfg_reg(DM644X_HPIEN_DISABLE);
+ davinci_cfg_reg(DM644X_ATAEN);
+ davinci_cfg_reg(DM644X_HDIREN);
+ platform_device_register(&ide_dev);
+ } else if (HAS_NAND) {
+ davinci_cfg_reg(DM644X_HPIEN_DISABLE);
+ davinci_cfg_reg(DM644X_ATAEN_DISABLE);
+
+ /* only one device will be jumpered and detected */
+ if (HAS_NAND)
+ platform_device_register(
+ &davinci_ntosd2_nandflash_device);
+ }
+
+ platform_add_devices(davinci_ntosd2_devices,
+ ARRAY_SIZE(davinci_ntosd2_devices));
+
+ /* Initialize I2C interface specific for this board */
+ status = ntosd2_init_i2c();
+ if (status < 0)
+ pr_warning("davinci_ntosd2_init: msp430 irq setup failed:"
+ " %d\n", status);
+
+ davinci_serial_init(&uart_config);
+ dm644x_init_asp(&dm644x_ntosd2_snd_data);
+
+ soc_info->emac_pdata->phy_mask = NEUROS_OSD2_PHY_MASK;
+ soc_info->emac_pdata->mdio_max_freq = NEUROS_OSD2_MDIO_FREQUENCY;
+
+ davinci_setup_usb(1000, 8);
+ /*
+ * Mux the pins to be GPIOs, VLYNQEN is already done at startup.
+ * The AEAWx are five new AEAW pins that can be muxed by separately.
+ * They are a bitmask for GPIO management. According TI
+ * documentation (http://www.ti.com/lit/gpn/tms320dm6446) to employ
+ * gpio(10,11,12,13) for leds any combination of bits works except
+ * four last. So we are to reset all five.
+ */
+ davinci_cfg_reg(DM644X_AEAW0);
+ davinci_cfg_reg(DM644X_AEAW1);
+ davinci_cfg_reg(DM644X_AEAW2);
+ davinci_cfg_reg(DM644X_AEAW3);
+ davinci_cfg_reg(DM644X_AEAW4);
+
+ davinci_setup_mmc(0, &davinci_ntosd2_mmc_config);
+}
+
+static __init void davinci_ntosd2_irq_init(void)
+{
+ davinci_irq_init();
+}
+
+MACHINE_START(NEUROS_OSD2, "Neuros OSD2")
+ /* Maintainer: Neuros Technologies <neuros@groups.google.com> */
+ .phys_io = IO_PHYS,
+ .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
+ .boot_params = (DAVINCI_DDR_BASE + 0x100),
+ .map_io = davinci_ntosd2_map_io,
+ .init_irq = davinci_ntosd2_irq_init,
+ .timer = &davinci_timer,
+ .init_machine = davinci_ntosd2_init,
+MACHINE_END
diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c
index 7acdfd8..08d373b 100644
--- a/arch/arm/mach-davinci/board-sffsdr.c
+++ b/arch/arm/mach-davinci/board-sffsdr.c
@@ -23,35 +23,24 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-#include <linux/kernel.h>
-#include <linux/module.h>
#include <linux/init.h>
-#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
-#include <linux/gpio.h>
-
#include <linux/i2c.h>
#include <linux/i2c/at24.h>
-#include <linux/etherdevice.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/io.h>
-#include <asm/setup.h>
#include <asm/mach-types.h>
-
#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
#include <asm/mach/flash.h>
#include <mach/dm644x.h>
#include <mach/common.h>
#include <mach/i2c.h>
#include <mach/serial.h>
-#include <mach/psc.h>
#include <mach/mux.h>
+#include <mach/usb.h>
#define SFFSDR_PHY_MASK (0x2)
#define SFFSDR_MDIO_FREQUENCY (2200000) /* PHY bus frequency */
@@ -107,11 +96,6 @@
.resource = davinci_sffsdr_nandflash_resource,
};
-static struct emac_platform_data sffsdr_emac_pdata = {
- .phy_mask = SFFSDR_PHY_MASK,
- .mdio_max_freq = SFFSDR_MDIO_FREQUENCY,
-};
-
static struct at24_platform_data eeprom_info = {
.byte_len = (64*1024) / 8,
.page_size = 32,
@@ -164,7 +148,7 @@
davinci_serial_init(&uart_config);
soc_info->emac_pdata->phy_mask = SFFSDR_PHY_MASK;
soc_info->emac_pdata->mdio_max_freq = SFFSDR_MDIO_FREQUENCY;
- setup_usb(0, 0); /* We support only peripheral mode. */
+ davinci_setup_usb(0, 0); /* We support only peripheral mode. */
/* mux VLYNQ pins */
davinci_cfg_reg(DM644X_VLYNQEN);
diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c
index 83d54d5..baece65 100644
--- a/arch/arm/mach-davinci/clock.c
+++ b/arch/arm/mach-davinci/clock.c
@@ -17,8 +17,8 @@
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/mutex.h>
-#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/delay.h>
#include <mach/hardware.h>
@@ -42,8 +42,7 @@
if (clk->parent)
__clk_enable(clk->parent);
if (clk->usecount++ == 0 && (clk->flags & CLK_PSC))
- davinci_psc_config(psc_domain(clk), clk->psc_ctlr,
- clk->lpsc, 1);
+ davinci_psc_config(psc_domain(clk), clk->gpsc, clk->lpsc, 1);
}
static void __clk_disable(struct clk *clk)
@@ -51,8 +50,7 @@
if (WARN_ON(clk->usecount == 0))
return;
if (--clk->usecount == 0 && !(clk->flags & CLK_PLL))
- davinci_psc_config(psc_domain(clk), clk->psc_ctlr,
- clk->lpsc, 0);
+ davinci_psc_config(psc_domain(clk), clk->gpsc, clk->lpsc, 0);
if (clk->parent)
__clk_disable(clk->parent);
}
@@ -99,19 +97,73 @@
if (clk == NULL || IS_ERR(clk))
return -EINVAL;
+ if (clk->round_rate)
+ return clk->round_rate(clk, rate);
+
return clk->rate;
}
EXPORT_SYMBOL(clk_round_rate);
+/* Propagate rate to children */
+static void propagate_rate(struct clk *root)
+{
+ struct clk *clk;
+
+ list_for_each_entry(clk, &root->children, childnode) {
+ if (clk->recalc)
+ clk->rate = clk->recalc(clk);
+ propagate_rate(clk);
+ }
+}
+
int clk_set_rate(struct clk *clk, unsigned long rate)
{
+ unsigned long flags;
+ int ret = -EINVAL;
+
+ if (clk == NULL || IS_ERR(clk))
+ return ret;
+
+ spin_lock_irqsave(&clockfw_lock, flags);
+ if (clk->set_rate)
+ ret = clk->set_rate(clk, rate);
+ if (ret == 0) {
+ if (clk->recalc)
+ clk->rate = clk->recalc(clk);
+ propagate_rate(clk);
+ }
+ spin_unlock_irqrestore(&clockfw_lock, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL(clk_set_rate);
+
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+ unsigned long flags;
+
if (clk == NULL || IS_ERR(clk))
return -EINVAL;
- /* changing the clk rate is not supported */
- return -EINVAL;
+ /* Cannot change parent on enabled clock */
+ if (WARN_ON(clk->usecount))
+ return -EINVAL;
+
+ mutex_lock(&clocks_mutex);
+ clk->parent = parent;
+ list_del_init(&clk->childnode);
+ list_add(&clk->childnode, &clk->parent->children);
+ mutex_unlock(&clocks_mutex);
+
+ spin_lock_irqsave(&clockfw_lock, flags);
+ if (clk->recalc)
+ clk->rate = clk->recalc(clk);
+ propagate_rate(clk);
+ spin_unlock_irqrestore(&clockfw_lock, flags);
+
+ return 0;
}
-EXPORT_SYMBOL(clk_set_rate);
+EXPORT_SYMBOL(clk_set_parent);
int clk_register(struct clk *clk)
{
@@ -123,16 +175,24 @@
clk->name, clk->parent->name))
return -EINVAL;
+ INIT_LIST_HEAD(&clk->children);
+
mutex_lock(&clocks_mutex);
list_add_tail(&clk->node, &clocks);
+ if (clk->parent)
+ list_add_tail(&clk->childnode, &clk->parent->children);
mutex_unlock(&clocks_mutex);
/* If rate is already set, use it */
if (clk->rate)
return 0;
+ /* Else, see if there is a way to calculate it */
+ if (clk->recalc)
+ clk->rate = clk->recalc(clk);
+
/* Otherwise, default to parent rate */
- if (clk->parent)
+ else if (clk->parent)
clk->rate = clk->parent->rate;
return 0;
@@ -146,6 +206,7 @@
mutex_lock(&clocks_mutex);
list_del(&clk->node);
+ list_del(&clk->childnode);
mutex_unlock(&clocks_mutex);
}
EXPORT_SYMBOL(clk_unregister);
@@ -166,11 +227,11 @@
continue;
/* ignore if in Disabled or SwRstDisable states */
- if (!davinci_psc_is_clk_active(ck->psc_ctlr, ck->lpsc))
+ if (!davinci_psc_is_clk_active(ck->gpsc, ck->lpsc))
continue;
pr_info("Clocks: disable unused %s\n", ck->name);
- davinci_psc_config(psc_domain(ck), ck->psc_ctlr, ck->lpsc, 0);
+ davinci_psc_config(psc_domain(ck), ck->gpsc, ck->lpsc, 0);
}
spin_unlock_irq(&clockfw_lock);
@@ -179,50 +240,62 @@
late_initcall(clk_disable_unused);
#endif
-static void clk_sysclk_recalc(struct clk *clk)
+static unsigned long clk_sysclk_recalc(struct clk *clk)
{
u32 v, plldiv;
struct pll_data *pll;
+ unsigned long rate = clk->rate;
/* If this is the PLL base clock, no more calculations needed */
if (clk->pll_data)
- return;
+ return rate;
if (WARN_ON(!clk->parent))
- return;
+ return rate;
- clk->rate = clk->parent->rate;
+ rate = clk->parent->rate;
/* Otherwise, the parent must be a PLL */
if (WARN_ON(!clk->parent->pll_data))
- return;
+ return rate;
pll = clk->parent->pll_data;
/* If pre-PLL, source clock is before the multiplier and divider(s) */
if (clk->flags & PRE_PLL)
- clk->rate = pll->input_rate;
+ rate = pll->input_rate;
if (!clk->div_reg)
- return;
+ return rate;
v = __raw_readl(pll->base + clk->div_reg);
if (v & PLLDIV_EN) {
plldiv = (v & PLLDIV_RATIO_MASK) + 1;
if (plldiv)
- clk->rate /= plldiv;
+ rate /= plldiv;
}
+
+ return rate;
}
-static void __init clk_pll_init(struct clk *clk)
+static unsigned long clk_leafclk_recalc(struct clk *clk)
+{
+ if (WARN_ON(!clk->parent))
+ return clk->rate;
+
+ return clk->parent->rate;
+}
+
+static unsigned long clk_pllclk_recalc(struct clk *clk)
{
u32 ctrl, mult = 1, prediv = 1, postdiv = 1;
u8 bypass;
struct pll_data *pll = clk->pll_data;
+ unsigned long rate = clk->rate;
pll->base = IO_ADDRESS(pll->phys_base);
ctrl = __raw_readl(pll->base + PLLCTL);
- clk->rate = pll->input_rate = clk->parent->rate;
+ rate = pll->input_rate = clk->parent->rate;
if (ctrl & PLLCTL_PLLEN) {
bypass = 0;
@@ -255,9 +328,9 @@
}
if (!bypass) {
- clk->rate /= prediv;
- clk->rate *= mult;
- clk->rate /= postdiv;
+ rate /= prediv;
+ rate *= mult;
+ rate /= postdiv;
}
pr_debug("PLL%d: input = %lu MHz [ ",
@@ -270,9 +343,91 @@
pr_debug("* %d ", mult);
if (postdiv > 1)
pr_debug("/ %d ", postdiv);
- pr_debug("] --> %lu MHz output.\n", clk->rate / 1000000);
+ pr_debug("] --> %lu MHz output.\n", rate / 1000000);
+
+ return rate;
}
+/**
+ * davinci_set_pllrate - set the output rate of a given PLL.
+ *
+ * Note: Currently tested to work with OMAP-L138 only.
+ *
+ * @pll: pll whose rate needs to be changed.
+ * @prediv: The pre divider value. Passing 0 disables the pre-divider.
+ * @pllm: The multiplier value. Passing 0 leads to multiply-by-one.
+ * @postdiv: The post divider value. Passing 0 disables the post-divider.
+ */
+int davinci_set_pllrate(struct pll_data *pll, unsigned int prediv,
+ unsigned int mult, unsigned int postdiv)
+{
+ u32 ctrl;
+ unsigned int locktime;
+
+ if (pll->base == NULL)
+ return -EINVAL;
+
+ /*
+ * PLL lock time required per OMAP-L138 datasheet is
+ * (2000 * prediv)/sqrt(pllm) OSCIN cycles. We approximate sqrt(pllm)
+ * as 4 and OSCIN cycle as 25 MHz.
+ */
+ if (prediv) {
+ locktime = ((2000 * prediv) / 100);
+ prediv = (prediv - 1) | PLLDIV_EN;
+ } else {
+ locktime = 20;
+ }
+ if (postdiv)
+ postdiv = (postdiv - 1) | PLLDIV_EN;
+ if (mult)
+ mult = mult - 1;
+
+ ctrl = __raw_readl(pll->base + PLLCTL);
+
+ /* Switch the PLL to bypass mode */
+ ctrl &= ~(PLLCTL_PLLENSRC | PLLCTL_PLLEN);
+ __raw_writel(ctrl, pll->base + PLLCTL);
+
+ /*
+ * Wait for 4 OSCIN/CLKIN cycles to ensure that the PLLC has switched
+ * to bypass mode. Delay of 1us ensures we are good for all > 4MHz
+ * OSCIN/CLKIN inputs. Typically the input is ~25MHz.
+ */
+ udelay(1);
+
+ /* Reset and enable PLL */
+ ctrl &= ~(PLLCTL_PLLRST | PLLCTL_PLLDIS);
+ __raw_writel(ctrl, pll->base + PLLCTL);
+
+ if (pll->flags & PLL_HAS_PREDIV)
+ __raw_writel(prediv, pll->base + PREDIV);
+
+ __raw_writel(mult, pll->base + PLLM);
+
+ if (pll->flags & PLL_HAS_POSTDIV)
+ __raw_writel(postdiv, pll->base + POSTDIV);
+
+ /*
+ * Wait for PLL to reset properly, OMAP-L138 datasheet says
+ * 'min' time = 125ns
+ */
+ udelay(1);
+
+ /* Bring PLL out of reset */
+ ctrl |= PLLCTL_PLLRST;
+ __raw_writel(ctrl, pll->base + PLLCTL);
+
+ udelay(locktime);
+
+ /* Remove PLL from bypass mode */
+ ctrl |= PLLCTL_PLLEN;
+ __raw_writel(ctrl, pll->base + PLLCTL);
+
+ return 0;
+}
+EXPORT_SYMBOL(davinci_set_pllrate);
+
int __init davinci_clk_init(struct davinci_clk *clocks)
{
struct davinci_clk *c;
@@ -281,12 +436,23 @@
for (c = clocks; c->lk.clk; c++) {
clk = c->lk.clk;
- if (clk->pll_data)
- clk_pll_init(clk);
+ if (!clk->recalc) {
- /* Calculate rates for PLL-derived clocks */
- else if (clk->flags & CLK_PLL)
- clk_sysclk_recalc(clk);
+ /* Check if clock is a PLL */
+ if (clk->pll_data)
+ clk->recalc = clk_pllclk_recalc;
+
+ /* Else, if it is a PLL-derived clock */
+ else if (clk->flags & CLK_PLL)
+ clk->recalc = clk_sysclk_recalc;
+
+ /* Otherwise, it is a leaf clock (PSC clock) */
+ else if (clk->parent)
+ clk->recalc = clk_leafclk_recalc;
+ }
+
+ if (clk->recalc)
+ clk->rate = clk->recalc(clk);
if (clk->lpsc)
clk->flags |= CLK_PSC;
@@ -352,9 +518,8 @@
/* REVISIT show device associations too */
/* cost is now small, but not linear... */
- list_for_each_entry(clk, &clocks, node) {
- if (clk->parent == parent)
- dump_clock(s, nest + NEST_DELTA, clk);
+ list_for_each_entry(clk, &parent->children, childnode) {
+ dump_clock(s, nest + NEST_DELTA, clk);
}
}
diff --git a/arch/arm/mach-davinci/clock.h b/arch/arm/mach-davinci/clock.h
index 27233cb..c92d77a 100644
--- a/arch/arm/mach-davinci/clock.h
+++ b/arch/arm/mach-davinci/clock.h
@@ -22,6 +22,10 @@
/* PLL/Reset register offsets */
#define PLLCTL 0x100
#define PLLCTL_PLLEN BIT(0)
+#define PLLCTL_PLLPWRDN BIT(1)
+#define PLLCTL_PLLRST BIT(3)
+#define PLLCTL_PLLDIS BIT(4)
+#define PLLCTL_PLLENSRC BIT(5)
#define PLLCTL_CLKMODE BIT(8)
#define PLLM 0x110
@@ -65,15 +69,20 @@
const char *name;
unsigned long rate;
u8 usecount;
- u8 flags;
u8 lpsc;
- u8 psc_ctlr;
+ u8 gpsc;
+ u32 flags;
struct clk *parent;
+ struct list_head children; /* list of children */
+ struct list_head childnode; /* parent's child list node */
struct pll_data *pll_data;
u32 div_reg;
+ unsigned long (*recalc) (struct clk *);
+ int (*set_rate) (struct clk *clk, unsigned long rate);
+ int (*round_rate) (struct clk *clk, unsigned long rate);
};
-/* Clock flags */
+/* Clock flags: SoC-specific flags start at BIT(16) */
#define ALWAYS_ENABLED BIT(1)
#define CLK_PSC BIT(2)
#define PSC_DSP BIT(3) /* PSC uses DSP domain, not ARM */
@@ -94,6 +103,8 @@
}
int davinci_clk_init(struct davinci_clk *clocks);
+int davinci_set_pllrate(struct pll_data *pll, unsigned int prediv,
+ unsigned int mult, unsigned int postdiv);
extern struct platform_device davinci_wdt_device;
diff --git a/arch/arm/mach-davinci/common.c b/arch/arm/mach-davinci/common.c
index 61ede19..c2de94c 100644
--- a/arch/arm/mach-davinci/common.c
+++ b/arch/arm/mach-davinci/common.c
@@ -86,6 +86,8 @@
dip = davinci_get_id(davinci_soc_info.jtag_id);
if (!dip) {
ret = -EINVAL;
+ pr_err("Unknown DaVinci JTAG ID 0x%x\n",
+ davinci_soc_info.jtag_id);
goto err;
}
@@ -104,5 +106,5 @@
return;
err:
- pr_err("davinci_common_init: SoC Initialization failed\n");
+ panic("davinci_common_init: SoC Initialization failed\n");
}
diff --git a/arch/arm/mach-davinci/cp_intc.c b/arch/arm/mach-davinci/cp_intc.c
index 96c8e97..52b287c 100644
--- a/arch/arm/mach-davinci/cp_intc.c
+++ b/arch/arm/mach-davinci/cp_intc.c
@@ -10,9 +10,6 @@
*/
#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
#include <linux/irq.h>
#include <linux/io.h>
diff --git a/arch/arm/mach-davinci/cpufreq.c b/arch/arm/mach-davinci/cpufreq.c
new file mode 100644
index 0000000..d3fa6de
--- /dev/null
+++ b/arch/arm/mach-davinci/cpufreq.c
@@ -0,0 +1,226 @@
+/*
+ * CPU frequency scaling for DaVinci
+ *
+ * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * Based on linux/arch/arm/plat-omap/cpu-omap.c. Original Copyright follows:
+ *
+ * Copyright (C) 2005 Nokia Corporation
+ * Written by Tony Lindgren <tony@atomide.com>
+ *
+ * Based on cpu-sa1110.c, Copyright (C) 2001 Russell King
+ *
+ * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Updated to support OMAP3
+ * Rajendra Nayak <rnayak@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/types.h>
+#include <linux/cpufreq.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+
+#include <mach/hardware.h>
+#include <mach/cpufreq.h>
+#include <mach/common.h>
+
+#include "clock.h"
+
+struct davinci_cpufreq {
+ struct device *dev;
+ struct clk *armclk;
+};
+static struct davinci_cpufreq cpufreq;
+
+static int davinci_verify_speed(struct cpufreq_policy *policy)
+{
+ struct davinci_cpufreq_config *pdata = cpufreq.dev->platform_data;
+ struct cpufreq_frequency_table *freq_table = pdata->freq_table;
+ struct clk *armclk = cpufreq.armclk;
+
+ if (freq_table)
+ return cpufreq_frequency_table_verify(policy, freq_table);
+
+ if (policy->cpu)
+ return -EINVAL;
+
+ cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq,
+ policy->cpuinfo.max_freq);
+
+ policy->min = clk_round_rate(armclk, policy->min * 1000) / 1000;
+ policy->max = clk_round_rate(armclk, policy->max * 1000) / 1000;
+ cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq,
+ policy->cpuinfo.max_freq);
+ return 0;
+}
+
+static unsigned int davinci_getspeed(unsigned int cpu)
+{
+ if (cpu)
+ return 0;
+
+ return clk_get_rate(cpufreq.armclk) / 1000;
+}
+
+static int davinci_target(struct cpufreq_policy *policy,
+ unsigned int target_freq, unsigned int relation)
+{
+ int ret = 0;
+ unsigned int idx;
+ struct cpufreq_freqs freqs;
+ struct davinci_cpufreq_config *pdata = cpufreq.dev->platform_data;
+ struct clk *armclk = cpufreq.armclk;
+
+ /*
+ * Ensure desired rate is within allowed range. Some govenors
+ * (ondemand) will just pass target_freq=0 to get the minimum.
+ */
+ if (target_freq < policy->cpuinfo.min_freq)
+ target_freq = policy->cpuinfo.min_freq;
+ if (target_freq > policy->cpuinfo.max_freq)
+ target_freq = policy->cpuinfo.max_freq;
+
+ freqs.old = davinci_getspeed(0);
+ freqs.new = clk_round_rate(armclk, target_freq * 1000) / 1000;
+ freqs.cpu = 0;
+
+ if (freqs.old == freqs.new)
+ return ret;
+
+ cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER,
+ dev_driver_string(cpufreq.dev),
+ "transition: %u --> %u\n", freqs.old, freqs.new);
+
+ ret = cpufreq_frequency_table_target(policy, pdata->freq_table,
+ freqs.new, relation, &idx);
+ if (ret)
+ return -EINVAL;
+
+ cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+ /* if moving to higher frequency, up the voltage beforehand */
+ if (pdata->set_voltage && freqs.new > freqs.old)
+ pdata->set_voltage(idx);
+
+ ret = clk_set_rate(armclk, idx);
+
+ /* if moving to lower freq, lower the voltage after lowering freq */
+ if (pdata->set_voltage && freqs.new < freqs.old)
+ pdata->set_voltage(idx);
+
+ cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+
+ return ret;
+}
+
+static int __init davinci_cpu_init(struct cpufreq_policy *policy)
+{
+ int result = 0;
+ struct davinci_cpufreq_config *pdata = cpufreq.dev->platform_data;
+ struct cpufreq_frequency_table *freq_table = pdata->freq_table;
+
+ if (policy->cpu != 0)
+ return -EINVAL;
+
+ /* Finish platform specific initialization */
+ if (pdata->init) {
+ result = pdata->init();
+ if (result)
+ return result;
+ }
+
+ policy->cur = policy->min = policy->max = davinci_getspeed(0);
+
+ if (freq_table) {
+ result = cpufreq_frequency_table_cpuinfo(policy, freq_table);
+ if (!result)
+ cpufreq_frequency_table_get_attr(freq_table,
+ policy->cpu);
+ } else {
+ policy->cpuinfo.min_freq = policy->min;
+ policy->cpuinfo.max_freq = policy->max;
+ }
+
+ policy->min = policy->cpuinfo.min_freq;
+ policy->max = policy->cpuinfo.max_freq;
+ policy->cur = davinci_getspeed(0);
+
+ /*
+ * Time measurement across the target() function yields ~1500-1800us
+ * time taken with no drivers on notification list.
+ * Setting the latency to 2000 us to accomodate addition of drivers
+ * to pre/post change notification list.
+ */
+ policy->cpuinfo.transition_latency = 2000 * 1000;
+ return 0;
+}
+
+static int davinci_cpu_exit(struct cpufreq_policy *policy)
+{
+ cpufreq_frequency_table_put_attr(policy->cpu);
+ return 0;
+}
+
+static struct freq_attr *davinci_cpufreq_attr[] = {
+ &cpufreq_freq_attr_scaling_available_freqs,
+ NULL,
+};
+
+static struct cpufreq_driver davinci_driver = {
+ .flags = CPUFREQ_STICKY,
+ .verify = davinci_verify_speed,
+ .target = davinci_target,
+ .get = davinci_getspeed,
+ .init = davinci_cpu_init,
+ .exit = davinci_cpu_exit,
+ .name = "davinci",
+ .attr = davinci_cpufreq_attr,
+};
+
+static int __init davinci_cpufreq_probe(struct platform_device *pdev)
+{
+ struct davinci_cpufreq_config *pdata = pdev->dev.platform_data;
+
+ if (!pdata)
+ return -EINVAL;
+ if (!pdata->freq_table)
+ return -EINVAL;
+
+ cpufreq.dev = &pdev->dev;
+
+ cpufreq.armclk = clk_get(NULL, "arm");
+ if (IS_ERR(cpufreq.armclk)) {
+ dev_err(cpufreq.dev, "Unable to get ARM clock\n");
+ return PTR_ERR(cpufreq.armclk);
+ }
+
+ return cpufreq_register_driver(&davinci_driver);
+}
+
+static int __exit davinci_cpufreq_remove(struct platform_device *pdev)
+{
+ clk_put(cpufreq.armclk);
+
+ return cpufreq_unregister_driver(&davinci_driver);
+}
+
+static struct platform_driver davinci_cpufreq_driver = {
+ .driver = {
+ .name = "cpufreq-davinci",
+ .owner = THIS_MODULE,
+ },
+ .remove = __exit_p(davinci_cpufreq_remove),
+};
+
+static int __init davinci_cpufreq_init(void)
+{
+ return platform_driver_probe(&davinci_cpufreq_driver,
+ davinci_cpufreq_probe);
+}
+late_initcall(davinci_cpufreq_init);
+
diff --git a/arch/arm/mach-davinci/cpuidle.c b/arch/arm/mach-davinci/cpuidle.c
new file mode 100644
index 0000000..97a90f3
--- /dev/null
+++ b/arch/arm/mach-davinci/cpuidle.c
@@ -0,0 +1,197 @@
+/*
+ * CPU idle for DaVinci SoCs
+ *
+ * Copyright (C) 2009 Texas Instruments Incorporated. http://www.ti.com/
+ *
+ * Derived from Marvell Kirkwood CPU idle code
+ * (arch/arm/mach-kirkwood/cpuidle.c)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/cpuidle.h>
+#include <linux/io.h>
+#include <asm/proc-fns.h>
+
+#include <mach/cpuidle.h>
+
+#define DAVINCI_CPUIDLE_MAX_STATES 2
+
+struct davinci_ops {
+ void (*enter) (u32 flags);
+ void (*exit) (u32 flags);
+ u32 flags;
+};
+
+/* fields in davinci_ops.flags */
+#define DAVINCI_CPUIDLE_FLAGS_DDR2_PWDN BIT(0)
+
+static struct cpuidle_driver davinci_idle_driver = {
+ .name = "cpuidle-davinci",
+ .owner = THIS_MODULE,
+};
+
+static DEFINE_PER_CPU(struct cpuidle_device, davinci_cpuidle_device);
+static void __iomem *ddr2_reg_base;
+
+#define DDR2_SDRCR_OFFSET 0xc
+#define DDR2_SRPD_BIT BIT(23)
+#define DDR2_LPMODEN_BIT BIT(31)
+
+static void davinci_save_ddr_power(int enter, bool pdown)
+{
+ u32 val;
+
+ val = __raw_readl(ddr2_reg_base + DDR2_SDRCR_OFFSET);
+
+ if (enter) {
+ if (pdown)
+ val |= DDR2_SRPD_BIT;
+ else
+ val &= ~DDR2_SRPD_BIT;
+ val |= DDR2_LPMODEN_BIT;
+ } else {
+ val &= ~(DDR2_SRPD_BIT | DDR2_LPMODEN_BIT);
+ }
+
+ __raw_writel(val, ddr2_reg_base + DDR2_SDRCR_OFFSET);
+}
+
+static void davinci_c2state_enter(u32 flags)
+{
+ davinci_save_ddr_power(1, !!(flags & DAVINCI_CPUIDLE_FLAGS_DDR2_PWDN));
+}
+
+static void davinci_c2state_exit(u32 flags)
+{
+ davinci_save_ddr_power(0, !!(flags & DAVINCI_CPUIDLE_FLAGS_DDR2_PWDN));
+}
+
+static struct davinci_ops davinci_states[DAVINCI_CPUIDLE_MAX_STATES] = {
+ [1] = {
+ .enter = davinci_c2state_enter,
+ .exit = davinci_c2state_exit,
+ },
+};
+
+/* Actual code that puts the SoC in different idle states */
+static int davinci_enter_idle(struct cpuidle_device *dev,
+ struct cpuidle_state *state)
+{
+ struct davinci_ops *ops = cpuidle_get_statedata(state);
+ struct timeval before, after;
+ int idle_time;
+
+ local_irq_disable();
+ do_gettimeofday(&before);
+
+ if (ops && ops->enter)
+ ops->enter(ops->flags);
+ /* Wait for interrupt state */
+ cpu_do_idle();
+ if (ops && ops->exit)
+ ops->exit(ops->flags);
+
+ do_gettimeofday(&after);
+ local_irq_enable();
+ idle_time = (after.tv_sec - before.tv_sec) * USEC_PER_SEC +
+ (after.tv_usec - before.tv_usec);
+ return idle_time;
+}
+
+static int __init davinci_cpuidle_probe(struct platform_device *pdev)
+{
+ int ret;
+ struct cpuidle_device *device;
+ struct davinci_cpuidle_config *pdata = pdev->dev.platform_data;
+ struct resource *ddr2_regs;
+ resource_size_t len;
+
+ device = &per_cpu(davinci_cpuidle_device, smp_processor_id());
+
+ if (!pdata) {
+ dev_err(&pdev->dev, "cannot get platform data\n");
+ return -ENOENT;
+ }
+
+ ddr2_regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!ddr2_regs) {
+ dev_err(&pdev->dev, "cannot get DDR2 controller register base");
+ return -ENODEV;
+ }
+
+ len = resource_size(ddr2_regs);
+
+ ddr2_regs = request_mem_region(ddr2_regs->start, len, ddr2_regs->name);
+ if (!ddr2_regs)
+ return -EBUSY;
+
+ ddr2_reg_base = ioremap(ddr2_regs->start, len);
+ if (!ddr2_reg_base) {
+ ret = -ENOMEM;
+ goto ioremap_fail;
+ }
+
+ ret = cpuidle_register_driver(&davinci_idle_driver);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to register driver\n");
+ goto driver_register_fail;
+ }
+
+ /* Wait for interrupt state */
+ device->states[0].enter = davinci_enter_idle;
+ device->states[0].exit_latency = 1;
+ device->states[0].target_residency = 10000;
+ device->states[0].flags = CPUIDLE_FLAG_TIME_VALID;
+ strcpy(device->states[0].name, "WFI");
+ strcpy(device->states[0].desc, "Wait for interrupt");
+
+ /* Wait for interrupt and DDR self refresh state */
+ device->states[1].enter = davinci_enter_idle;
+ device->states[1].exit_latency = 10;
+ device->states[1].target_residency = 10000;
+ device->states[1].flags = CPUIDLE_FLAG_TIME_VALID;
+ strcpy(device->states[1].name, "DDR SR");
+ strcpy(device->states[1].desc, "WFI and DDR Self Refresh");
+ if (pdata->ddr2_pdown)
+ davinci_states[1].flags |= DAVINCI_CPUIDLE_FLAGS_DDR2_PWDN;
+ cpuidle_set_statedata(&device->states[1], &davinci_states[1]);
+
+ device->state_count = DAVINCI_CPUIDLE_MAX_STATES;
+
+ ret = cpuidle_register_device(device);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to register device\n");
+ goto device_register_fail;
+ }
+
+ return 0;
+
+device_register_fail:
+ cpuidle_unregister_driver(&davinci_idle_driver);
+driver_register_fail:
+ iounmap(ddr2_reg_base);
+ioremap_fail:
+ release_mem_region(ddr2_regs->start, len);
+ return ret;
+}
+
+static struct platform_driver davinci_cpuidle_driver = {
+ .driver = {
+ .name = "cpuidle-davinci",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init davinci_cpuidle_init(void)
+{
+ return platform_driver_probe(&davinci_cpuidle_driver,
+ davinci_cpuidle_probe);
+}
+device_initcall(davinci_cpuidle_init);
+
diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c
index 19b2748..b22b5cf 100644
--- a/arch/arm/mach-davinci/da830.c
+++ b/arch/arm/mach-davinci/da830.c
@@ -8,22 +8,17 @@
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
-#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/clk.h>
-#include <linux/platform_device.h>
#include <asm/mach/map.h>
-#include <mach/clock.h>
#include <mach/psc.h>
-#include <mach/mux.h>
#include <mach/irqs.h>
#include <mach/cputype.h>
#include <mach/common.h>
#include <mach/time.h>
#include <mach/da8xx.h>
-#include <mach/asp.h>
#include "clock.h"
#include "mux.h"
@@ -193,14 +188,14 @@
.name = "uart1",
.parent = &pll0_sysclk2,
.lpsc = DA8XX_LPSC1_UART1,
- .psc_ctlr = 1,
+ .gpsc = 1,
};
static struct clk uart2_clk = {
.name = "uart2",
.parent = &pll0_sysclk2,
.lpsc = DA8XX_LPSC1_UART2,
- .psc_ctlr = 1,
+ .gpsc = 1,
};
static struct clk spi0_clk = {
@@ -213,98 +208,98 @@
.name = "spi1",
.parent = &pll0_sysclk2,
.lpsc = DA8XX_LPSC1_SPI1,
- .psc_ctlr = 1,
+ .gpsc = 1,
};
static struct clk ecap0_clk = {
.name = "ecap0",
.parent = &pll0_sysclk2,
.lpsc = DA8XX_LPSC1_ECAP,
- .psc_ctlr = 1,
+ .gpsc = 1,
};
static struct clk ecap1_clk = {
.name = "ecap1",
.parent = &pll0_sysclk2,
.lpsc = DA8XX_LPSC1_ECAP,
- .psc_ctlr = 1,
+ .gpsc = 1,
};
static struct clk ecap2_clk = {
.name = "ecap2",
.parent = &pll0_sysclk2,
.lpsc = DA8XX_LPSC1_ECAP,
- .psc_ctlr = 1,
+ .gpsc = 1,
};
static struct clk pwm0_clk = {
.name = "pwm0",
.parent = &pll0_sysclk2,
.lpsc = DA8XX_LPSC1_PWM,
- .psc_ctlr = 1,
+ .gpsc = 1,
};
static struct clk pwm1_clk = {
.name = "pwm1",
.parent = &pll0_sysclk2,
.lpsc = DA8XX_LPSC1_PWM,
- .psc_ctlr = 1,
+ .gpsc = 1,
};
static struct clk pwm2_clk = {
.name = "pwm2",
.parent = &pll0_sysclk2,
.lpsc = DA8XX_LPSC1_PWM,
- .psc_ctlr = 1,
+ .gpsc = 1,
};
static struct clk eqep0_clk = {
.name = "eqep0",
.parent = &pll0_sysclk2,
.lpsc = DA830_LPSC1_EQEP,
- .psc_ctlr = 1,
+ .gpsc = 1,
};
static struct clk eqep1_clk = {
.name = "eqep1",
.parent = &pll0_sysclk2,
.lpsc = DA830_LPSC1_EQEP,
- .psc_ctlr = 1,
+ .gpsc = 1,
};
static struct clk lcdc_clk = {
.name = "lcdc",
.parent = &pll0_sysclk2,
.lpsc = DA8XX_LPSC1_LCDC,
- .psc_ctlr = 1,
+ .gpsc = 1,
};
static struct clk mcasp0_clk = {
.name = "mcasp0",
.parent = &pll0_sysclk2,
.lpsc = DA8XX_LPSC1_McASP0,
- .psc_ctlr = 1,
+ .gpsc = 1,
};
static struct clk mcasp1_clk = {
.name = "mcasp1",
.parent = &pll0_sysclk2,
.lpsc = DA830_LPSC1_McASP1,
- .psc_ctlr = 1,
+ .gpsc = 1,
};
static struct clk mcasp2_clk = {
.name = "mcasp2",
.parent = &pll0_sysclk2,
.lpsc = DA830_LPSC1_McASP2,
- .psc_ctlr = 1,
+ .gpsc = 1,
};
static struct clk usb20_clk = {
.name = "usb20",
.parent = &pll0_sysclk2,
.lpsc = DA8XX_LPSC1_USB20,
- .psc_ctlr = 1,
+ .gpsc = 1,
};
static struct clk aemif_clk = {
@@ -332,36 +327,36 @@
.name = "emac",
.parent = &pll0_sysclk4,
.lpsc = DA8XX_LPSC1_CPGMAC,
- .psc_ctlr = 1,
+ .gpsc = 1,
};
static struct clk gpio_clk = {
.name = "gpio",
.parent = &pll0_sysclk4,
.lpsc = DA8XX_LPSC1_GPIO,
- .psc_ctlr = 1,
+ .gpsc = 1,
};
static struct clk i2c1_clk = {
.name = "i2c1",
.parent = &pll0_sysclk4,
.lpsc = DA8XX_LPSC1_I2C,
- .psc_ctlr = 1,
+ .gpsc = 1,
};
static struct clk usb11_clk = {
.name = "usb11",
.parent = &pll0_sysclk4,
.lpsc = DA8XX_LPSC1_USB11,
- .psc_ctlr = 1,
+ .gpsc = 1,
};
static struct clk emif3_clk = {
.name = "emif3",
.parent = &pll0_sysclk5,
.lpsc = DA8XX_LPSC1_EMIF3C,
+ .gpsc = 1,
.flags = ALWAYS_ENABLED,
- .psc_ctlr = 1,
};
static struct clk arm_clk = {
@@ -411,7 +406,7 @@
CLK(NULL, "pwm2", &pwm2_clk),
CLK("eqep.0", NULL, &eqep0_clk),
CLK("eqep.1", NULL, &eqep1_clk),
- CLK("da830_lcdc", NULL, &lcdc_clk),
+ CLK("da8xx_lcdc.0", NULL, &lcdc_clk),
CLK("davinci-mcasp.0", NULL, &mcasp0_clk),
CLK("davinci-mcasp.1", NULL, &mcasp1_clk),
CLK("davinci-mcasp.2", NULL, &mcasp2_clk),
@@ -1143,7 +1138,21 @@
.part_no = 0xb7df,
.manufacturer = 0x017, /* 0x02f >> 1 */
.cpu_id = DAVINCI_CPU_ID_DA830,
- .name = "da830/omap l137",
+ .name = "da830/omap-l137 rev1.0",
+ },
+ {
+ .variant = 0x8,
+ .part_no = 0xb7df,
+ .manufacturer = 0x017,
+ .cpu_id = DAVINCI_CPU_ID_DA830,
+ .name = "da830/omap-l137 rev1.1",
+ },
+ {
+ .variant = 0x9,
+ .part_no = 0xb7df,
+ .manufacturer = 0x017,
+ .cpu_id = DAVINCI_CPU_ID_DA830,
+ .name = "da830/omap-l137 rev2.0",
},
};
@@ -1178,13 +1187,11 @@
static struct davinci_soc_info davinci_soc_info_da830 = {
.io_desc = da830_io_desc,
.io_desc_num = ARRAY_SIZE(da830_io_desc),
- .jtag_id_base = IO_ADDRESS(DA8XX_JTAG_ID_REG),
.ids = da830_ids,
.ids_num = ARRAY_SIZE(da830_ids),
.cpu_clks = da830_clks,
.psc_bases = da830_psc_bases,
.psc_bases_num = ARRAY_SIZE(da830_psc_bases),
- .pinmux_base = IO_ADDRESS(DA8XX_BOOT_CFG_BASE + 0x120),
.pinmux_pins = da830_pins,
.pinmux_pins_num = ARRAY_SIZE(da830_pins),
.intc_base = (void __iomem *)DA8XX_CP_INTC_VIRT,
@@ -1201,5 +1208,13 @@
void __init da830_init(void)
{
+ da8xx_syscfg_base = ioremap(DA8XX_SYSCFG_BASE, SZ_4K);
+ if (WARN(!da8xx_syscfg_base, "Unable to map syscfg module"))
+ return;
+
+ davinci_soc_info_da830.jtag_id_base =
+ DA8XX_SYSCFG_VIRT(DA8XX_JTAG_ID_REG);
+ davinci_soc_info_da830.pinmux_base = DA8XX_SYSCFG_VIRT(0x120);
+
davinci_common_init(&davinci_soc_info_da830);
}
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index 192d719..717806c 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -11,31 +11,41 @@
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
-#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/clk.h>
#include <linux/platform_device.h>
+#include <linux/cpufreq.h>
+#include <linux/regulator/consumer.h>
#include <asm/mach/map.h>
-#include <mach/clock.h>
#include <mach/psc.h>
-#include <mach/mux.h>
#include <mach/irqs.h>
#include <mach/cputype.h>
#include <mach/common.h>
#include <mach/time.h>
#include <mach/da8xx.h>
+#include <mach/cpufreq.h>
#include "clock.h"
#include "mux.h"
+/* SoC specific clock flags */
+#define DA850_CLK_ASYNC3 BIT(16)
+
#define DA850_PLL1_BASE 0x01e1a000
#define DA850_TIMER64P2_BASE 0x01f0c000
#define DA850_TIMER64P3_BASE 0x01f0d000
#define DA850_REF_FREQ 24000000
+#define CFGCHIP3_ASYNC3_CLKSRC BIT(4)
+#define CFGCHIP0_PLL_MASTER_LOCK BIT(4)
+
+static int da850_set_armrate(struct clk *clk, unsigned long rate);
+static int da850_round_armrate(struct clk *clk, unsigned long rate);
+static int da850_set_pll0rate(struct clk *clk, unsigned long armrate);
+
static struct pll_data pll0_data = {
.num = 1,
.phys_base = DA8XX_PLL0_BASE,
@@ -52,6 +62,7 @@
.parent = &ref_clk,
.pll_data = &pll0_data,
.flags = CLK_PLL,
+ .set_rate = da850_set_pll0rate,
};
static struct clk pll0_aux_clk = {
@@ -210,16 +221,16 @@
.name = "tpcc1",
.parent = &pll0_sysclk2,
.lpsc = DA850_LPSC1_TPCC1,
+ .gpsc = 1,
.flags = CLK_PSC | ALWAYS_ENABLED,
- .psc_ctlr = 1,
};
static struct clk tptc2_clk = {
.name = "tptc2",
.parent = &pll0_sysclk2,
.lpsc = DA850_LPSC1_TPTC2,
+ .gpsc = 1,
.flags = ALWAYS_ENABLED,
- .psc_ctlr = 1,
};
static struct clk uart0_clk = {
@@ -232,14 +243,16 @@
.name = "uart1",
.parent = &pll0_sysclk2,
.lpsc = DA8XX_LPSC1_UART1,
- .psc_ctlr = 1,
+ .gpsc = 1,
+ .flags = DA850_CLK_ASYNC3,
};
static struct clk uart2_clk = {
.name = "uart2",
.parent = &pll0_sysclk2,
.lpsc = DA8XX_LPSC1_UART2,
- .psc_ctlr = 1,
+ .gpsc = 1,
+ .flags = DA850_CLK_ASYNC3,
};
static struct clk aintc_clk = {
@@ -253,22 +266,22 @@
.name = "gpio",
.parent = &pll0_sysclk4,
.lpsc = DA8XX_LPSC1_GPIO,
- .psc_ctlr = 1,
+ .gpsc = 1,
};
static struct clk i2c1_clk = {
.name = "i2c1",
.parent = &pll0_sysclk4,
.lpsc = DA8XX_LPSC1_I2C,
- .psc_ctlr = 1,
+ .gpsc = 1,
};
static struct clk emif3_clk = {
.name = "emif3",
.parent = &pll0_sysclk5,
.lpsc = DA8XX_LPSC1_EMIF3C,
+ .gpsc = 1,
.flags = ALWAYS_ENABLED,
- .psc_ctlr = 1,
};
static struct clk arm_clk = {
@@ -276,6 +289,8 @@
.parent = &pll0_sysclk6,
.lpsc = DA8XX_LPSC0_ARM,
.flags = ALWAYS_ENABLED,
+ .set_rate = da850_set_armrate,
+ .round_rate = da850_round_armrate,
};
static struct clk rmii_clk = {
@@ -287,21 +302,22 @@
.name = "emac",
.parent = &pll0_sysclk4,
.lpsc = DA8XX_LPSC1_CPGMAC,
- .psc_ctlr = 1,
+ .gpsc = 1,
};
static struct clk mcasp_clk = {
.name = "mcasp",
.parent = &pll0_sysclk2,
.lpsc = DA8XX_LPSC1_McASP0,
- .psc_ctlr = 1,
+ .gpsc = 1,
+ .flags = DA850_CLK_ASYNC3,
};
static struct clk lcdc_clk = {
.name = "lcdc",
.parent = &pll0_sysclk2,
.lpsc = DA8XX_LPSC1_LCDC,
- .psc_ctlr = 1,
+ .gpsc = 1,
};
static struct clk mmcsd_clk = {
@@ -404,6 +420,14 @@
MUX_CFG(DA850, MII_RXD_0, 3, 28, 15, 8, false)
MUX_CFG(DA850, MDIO_CLK, 4, 0, 15, 8, false)
MUX_CFG(DA850, MDIO_D, 4, 4, 15, 8, false)
+ MUX_CFG(DA850, RMII_TXD_0, 14, 12, 15, 8, false)
+ MUX_CFG(DA850, RMII_TXD_1, 14, 8, 15, 8, false)
+ MUX_CFG(DA850, RMII_TXEN, 14, 16, 15, 8, false)
+ MUX_CFG(DA850, RMII_CRS_DV, 15, 4, 15, 8, false)
+ MUX_CFG(DA850, RMII_RXD_0, 14, 24, 15, 8, false)
+ MUX_CFG(DA850, RMII_RXD_1, 14, 20, 15, 8, false)
+ MUX_CFG(DA850, RMII_RXER, 14, 28, 15, 8, false)
+ MUX_CFG(DA850, RMII_MHZ_50_CLK, 15, 0, 15, 0, false)
/* McASP function */
MUX_CFG(DA850, ACLKR, 0, 0, 15, 1, false)
MUX_CFG(DA850, ACLKX, 0, 4, 15, 1, false)
@@ -506,8 +530,9 @@
MUX_CFG(DA850, EMA_WAIT_1, 6, 24, 15, 1, false)
MUX_CFG(DA850, NEMA_CS_2, 7, 0, 15, 1, false)
/* GPIO function */
+ MUX_CFG(DA850, GPIO2_6, 6, 4, 15, 8, false)
+ MUX_CFG(DA850, GPIO2_8, 5, 28, 15, 8, false)
MUX_CFG(DA850, GPIO2_15, 5, 0, 15, 8, false)
- MUX_CFG(DA850, GPIO8_10, 18, 28, 15, 8, false)
MUX_CFG(DA850, GPIO4_0, 10, 28, 15, 8, false)
MUX_CFG(DA850, GPIO4_1, 10, 24, 15, 8, false)
#endif
@@ -547,6 +572,14 @@
-1
};
+const short da850_rmii_pins[] __initdata = {
+ DA850_RMII_TXD_0, DA850_RMII_TXD_1, DA850_RMII_TXEN,
+ DA850_RMII_CRS_DV, DA850_RMII_RXD_0, DA850_RMII_RXD_1,
+ DA850_RMII_RXER, DA850_RMII_MHZ_50_CLK, DA850_MDIO_CLK,
+ DA850_MDIO_D,
+ -1
+};
+
const short da850_mcasp_pins[] __initdata = {
DA850_AHCLKX, DA850_ACLKX, DA850_AFSX,
DA850_AHCLKR, DA850_ACLKR, DA850_AFSR, DA850_AMUTE,
@@ -555,12 +588,11 @@
};
const short da850_lcdcntl_pins[] __initdata = {
- DA850_LCD_D_1, DA850_LCD_D_2, DA850_LCD_D_3, DA850_LCD_D_4,
- DA850_LCD_D_5, DA850_LCD_D_6, DA850_LCD_D_7, DA850_LCD_D_8,
- DA850_LCD_D_9, DA850_LCD_D_10, DA850_LCD_D_11, DA850_LCD_D_12,
- DA850_LCD_D_13, DA850_LCD_D_14, DA850_LCD_D_15, DA850_LCD_PCLK,
- DA850_LCD_HSYNC, DA850_LCD_VSYNC, DA850_NLCD_AC_ENB_CS, DA850_GPIO2_15,
- DA850_GPIO8_10,
+ DA850_LCD_D_0, DA850_LCD_D_1, DA850_LCD_D_2, DA850_LCD_D_3,
+ DA850_LCD_D_4, DA850_LCD_D_5, DA850_LCD_D_6, DA850_LCD_D_7,
+ DA850_LCD_D_8, DA850_LCD_D_9, DA850_LCD_D_10, DA850_LCD_D_11,
+ DA850_LCD_D_12, DA850_LCD_D_13, DA850_LCD_D_14, DA850_LCD_D_15,
+ DA850_LCD_PCLK, DA850_LCD_HSYNC, DA850_LCD_VSYNC, DA850_NLCD_AC_ENB_CS,
-1
};
@@ -790,16 +822,221 @@
.clocksource_id = T0_TOP,
};
+static void da850_set_async3_src(int pllnum)
+{
+ struct clk *clk, *newparent = pllnum ? &pll1_sysclk2 : &pll0_sysclk2;
+ struct davinci_clk *c;
+ unsigned int v;
+ int ret;
+
+ for (c = da850_clks; c->lk.clk; c++) {
+ clk = c->lk.clk;
+ if (clk->flags & DA850_CLK_ASYNC3) {
+ ret = clk_set_parent(clk, newparent);
+ WARN(ret, "DA850: unable to re-parent clock %s",
+ clk->name);
+ }
+ }
+
+ v = __raw_readl(DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP3_REG));
+ if (pllnum)
+ v |= CFGCHIP3_ASYNC3_CLKSRC;
+ else
+ v &= ~CFGCHIP3_ASYNC3_CLKSRC;
+ __raw_writel(v, DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP3_REG));
+}
+
+#ifdef CONFIG_CPU_FREQ
+/*
+ * Notes:
+ * According to the TRM, minimum PLLM results in maximum power savings.
+ * The OPP definitions below should keep the PLLM as low as possible.
+ *
+ * The output of the PLLM must be between 400 to 600 MHz.
+ * This rules out prediv of anything but divide-by-one for 24Mhz OSC input.
+ */
+struct da850_opp {
+ unsigned int freq; /* in KHz */
+ unsigned int prediv;
+ unsigned int mult;
+ unsigned int postdiv;
+ unsigned int cvdd_min; /* in uV */
+ unsigned int cvdd_max; /* in uV */
+};
+
+static const struct da850_opp da850_opp_300 = {
+ .freq = 300000,
+ .prediv = 1,
+ .mult = 25,
+ .postdiv = 2,
+ .cvdd_min = 1140000,
+ .cvdd_max = 1320000,
+};
+
+static const struct da850_opp da850_opp_200 = {
+ .freq = 200000,
+ .prediv = 1,
+ .mult = 25,
+ .postdiv = 3,
+ .cvdd_min = 1050000,
+ .cvdd_max = 1160000,
+};
+
+static const struct da850_opp da850_opp_96 = {
+ .freq = 96000,
+ .prediv = 1,
+ .mult = 20,
+ .postdiv = 5,
+ .cvdd_min = 950000,
+ .cvdd_max = 1050000,
+};
+
+#define OPP(freq) \
+ { \
+ .index = (unsigned int) &da850_opp_##freq, \
+ .frequency = freq * 1000, \
+ }
+
+static struct cpufreq_frequency_table da850_freq_table[] = {
+ OPP(300),
+ OPP(200),
+ OPP(96),
+ {
+ .index = 0,
+ .frequency = CPUFREQ_TABLE_END,
+ },
+};
+
+#ifdef CONFIG_REGULATOR
+static struct regulator *cvdd;
+
+static int da850_set_voltage(unsigned int index)
+{
+ struct da850_opp *opp;
+
+ if (!cvdd)
+ return -ENODEV;
+
+ opp = (struct da850_opp *) da850_freq_table[index].index;
+
+ return regulator_set_voltage(cvdd, opp->cvdd_min, opp->cvdd_max);
+}
+
+static int da850_regulator_init(void)
+{
+ cvdd = regulator_get(NULL, "cvdd");
+ if (WARN(IS_ERR(cvdd), "Unable to obtain voltage regulator for CVDD;"
+ " voltage scaling unsupported\n")) {
+ return PTR_ERR(cvdd);
+ }
+
+ return 0;
+}
+#endif
+
+static struct davinci_cpufreq_config cpufreq_info = {
+ .freq_table = &da850_freq_table[0],
+#ifdef CONFIG_REGULATOR
+ .init = da850_regulator_init,
+ .set_voltage = da850_set_voltage,
+#endif
+};
+
+static struct platform_device da850_cpufreq_device = {
+ .name = "cpufreq-davinci",
+ .dev = {
+ .platform_data = &cpufreq_info,
+ },
+};
+
+int __init da850_register_cpufreq(void)
+{
+ return platform_device_register(&da850_cpufreq_device);
+}
+
+static int da850_round_armrate(struct clk *clk, unsigned long rate)
+{
+ int i, ret = 0, diff;
+ unsigned int best = (unsigned int) -1;
+
+ rate /= 1000; /* convert to kHz */
+
+ for (i = 0; da850_freq_table[i].frequency != CPUFREQ_TABLE_END; i++) {
+ diff = da850_freq_table[i].frequency - rate;
+ if (diff < 0)
+ diff = -diff;
+
+ if (diff < best) {
+ best = diff;
+ ret = da850_freq_table[i].frequency;
+ }
+ }
+
+ return ret * 1000;
+}
+
+static int da850_set_armrate(struct clk *clk, unsigned long index)
+{
+ struct clk *pllclk = &pll0_clk;
+
+ return clk_set_rate(pllclk, index);
+}
+
+static int da850_set_pll0rate(struct clk *clk, unsigned long index)
+{
+ unsigned int prediv, mult, postdiv;
+ struct da850_opp *opp;
+ struct pll_data *pll = clk->pll_data;
+ unsigned int v;
+ int ret;
+
+ opp = (struct da850_opp *) da850_freq_table[index].index;
+ prediv = opp->prediv;
+ mult = opp->mult;
+ postdiv = opp->postdiv;
+
+ /* Unlock writing to PLL registers */
+ v = __raw_readl(DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP0_REG));
+ v &= ~CFGCHIP0_PLL_MASTER_LOCK;
+ __raw_writel(v, DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP0_REG));
+
+ ret = davinci_set_pllrate(pll, prediv, mult, postdiv);
+ if (WARN_ON(ret))
+ return ret;
+
+ return 0;
+}
+#else
+int __init da850_register_cpufreq(void)
+{
+ return 0;
+}
+
+static int da850_set_armrate(struct clk *clk, unsigned long rate)
+{
+ return -EINVAL;
+}
+
+static int da850_set_pll0rate(struct clk *clk, unsigned long armrate)
+{
+ return -EINVAL;
+}
+
+static int da850_round_armrate(struct clk *clk, unsigned long rate)
+{
+ return clk->rate;
+}
+#endif
+
+
static struct davinci_soc_info davinci_soc_info_da850 = {
.io_desc = da850_io_desc,
.io_desc_num = ARRAY_SIZE(da850_io_desc),
- .jtag_id_base = IO_ADDRESS(DA8XX_JTAG_ID_REG),
.ids = da850_ids,
.ids_num = ARRAY_SIZE(da850_ids),
.cpu_clks = da850_clks,
.psc_bases = da850_psc_bases,
.psc_bases_num = ARRAY_SIZE(da850_psc_bases),
- .pinmux_base = IO_ADDRESS(DA8XX_BOOT_CFG_BASE + 0x120),
.pinmux_pins = da850_pins,
.pinmux_pins_num = ARRAY_SIZE(da850_pins),
.intc_base = (void __iomem *)DA8XX_CP_INTC_VIRT,
@@ -816,5 +1053,22 @@
void __init da850_init(void)
{
+ da8xx_syscfg_base = ioremap(DA8XX_SYSCFG_BASE, SZ_4K);
+ if (WARN(!da8xx_syscfg_base, "Unable to map syscfg module"))
+ return;
+
+ davinci_soc_info_da850.jtag_id_base =
+ DA8XX_SYSCFG_VIRT(DA8XX_JTAG_ID_REG);
+ davinci_soc_info_da850.pinmux_base = DA8XX_SYSCFG_VIRT(0x120);
+
davinci_common_init(&davinci_soc_info_da850);
+
+ /*
+ * Move the clock source of Async3 domain to PLL1 SYSCLK2.
+ * This helps keeping the peripherals on this domain insulated
+ * from CPU frequency changes caused by DVFS. The firmware sets
+ * both PLL0 and PLL1 to the same frequency so, there should not
+ * be any noticible change even in non-DVFS use cases.
+ */
+ da850_set_async3_src(1);
}
diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
index 58ad5b6..dd2d32c 100644
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -10,8 +10,6 @@
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
-#include <linux/module.h>
-#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
@@ -21,7 +19,7 @@
#include <mach/common.h>
#include <mach/time.h>
#include <mach/da8xx.h>
-#include <video/da8xx-fb.h>
+#include <mach/cpuidle.h>
#include "clock.h"
@@ -30,6 +28,7 @@
#define DA8XX_TPTC1_BASE 0x01c08400
#define DA8XX_WDOG_BASE 0x01c21000 /* DA8XX_TIMER64P1_BASE */
#define DA8XX_I2C0_BASE 0x01c22000
+#define DA8XX_RTC_BASE 0x01C23000
#define DA8XX_EMAC_CPPI_PORT_BASE 0x01e20000
#define DA8XX_EMAC_CPGMACSS_BASE 0x01e22000
#define DA8XX_EMAC_CPGMAC_BASE 0x01e23000
@@ -43,6 +42,8 @@
#define DA8XX_MDIO_REG_OFFSET 0x4000
#define DA8XX_EMAC_CTRL_RAM_SIZE SZ_8K
+void __iomem *da8xx_syscfg_base;
+
static struct plat_serial8250_port da8xx_serial_pdata[] = {
{
.mapbase = DA8XX_UART0_BASE,
@@ -282,6 +283,11 @@
.resource = da8xx_emac_resources,
};
+int __init da8xx_register_emac(void)
+{
+ return platform_device_register(&da8xx_emac_device);
+}
+
static struct resource da830_mcasp1_resources[] = {
{
.name = "mcasp1",
@@ -338,12 +344,7 @@
.resource = da850_mcasp_resources,
};
-int __init da8xx_register_emac(void)
-{
- return platform_device_register(&da8xx_emac_device);
-}
-
-void __init da8xx_init_mcasp(int id, struct snd_platform_data *pdata)
+void __init da8xx_register_mcasp(int id, struct snd_platform_data *pdata)
{
/* DA830/OMAP-L137 has 3 instances of McASP */
if (cpu_is_davinci_da830() && id == 1) {
@@ -379,10 +380,16 @@
.raster_order = 0,
};
-static struct da8xx_lcdc_platform_data da850_evm_lcdc_pdata = {
- .manu_name = "sharp",
- .controller_data = &lcd_cfg,
- .type = "Sharp_LK043T1DG01",
+struct da8xx_lcdc_platform_data sharp_lcd035q3dg01_pdata = {
+ .manu_name = "sharp",
+ .controller_data = &lcd_cfg,
+ .type = "Sharp_LCD035Q3DG01",
+};
+
+struct da8xx_lcdc_platform_data sharp_lk043t1dg01_pdata = {
+ .manu_name = "sharp",
+ .controller_data = &lcd_cfg,
+ .type = "Sharp_LK043T1DG01",
};
static struct resource da8xx_lcdc_resources[] = {
@@ -398,19 +405,17 @@
},
};
-static struct platform_device da850_lcdc_device = {
+static struct platform_device da8xx_lcdc_device = {
.name = "da8xx_lcdc",
.id = 0,
.num_resources = ARRAY_SIZE(da8xx_lcdc_resources),
.resource = da8xx_lcdc_resources,
- .dev = {
- .platform_data = &da850_evm_lcdc_pdata,
- }
};
-int __init da8xx_register_lcdc(void)
+int __init da8xx_register_lcdc(struct da8xx_lcdc_platform_data *pdata)
{
- return platform_device_register(&da850_lcdc_device);
+ da8xx_lcdc_device.dev.platform_data = pdata;
+ return platform_device_register(&da8xx_lcdc_device);
}
static struct resource da8xx_mmcsd0_resources[] = {
@@ -448,3 +453,66 @@
da8xx_mmcsd0_device.dev.platform_data = config;
return platform_device_register(&da8xx_mmcsd0_device);
}
+
+static struct resource da8xx_rtc_resources[] = {
+ {
+ .start = DA8XX_RTC_BASE,
+ .end = DA8XX_RTC_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ { /* timer irq */
+ .start = IRQ_DA8XX_RTC,
+ .end = IRQ_DA8XX_RTC,
+ .flags = IORESOURCE_IRQ,
+ },
+ { /* alarm irq */
+ .start = IRQ_DA8XX_RTC,
+ .end = IRQ_DA8XX_RTC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device da8xx_rtc_device = {
+ .name = "omap_rtc",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(da8xx_rtc_resources),
+ .resource = da8xx_rtc_resources,
+};
+
+int da8xx_register_rtc(void)
+{
+ /* Unlock the rtc's registers */
+ __raw_writel(0x83e70b13, IO_ADDRESS(DA8XX_RTC_BASE + 0x6c));
+ __raw_writel(0x95a4f1e0, IO_ADDRESS(DA8XX_RTC_BASE + 0x70));
+
+ return platform_device_register(&da8xx_rtc_device);
+}
+
+static struct resource da8xx_cpuidle_resources[] = {
+ {
+ .start = DA8XX_DDR2_CTL_BASE,
+ .end = DA8XX_DDR2_CTL_BASE + SZ_32K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+/* DA8XX devices support DDR2 power down */
+static struct davinci_cpuidle_config da8xx_cpuidle_pdata = {
+ .ddr2_pdown = 1,
+};
+
+
+static struct platform_device da8xx_cpuidle_device = {
+ .name = "cpuidle-davinci",
+ .num_resources = ARRAY_SIZE(da8xx_cpuidle_resources),
+ .resource = da8xx_cpuidle_resources,
+ .dev = {
+ .platform_data = &da8xx_cpuidle_pdata,
+ },
+};
+
+int __init da8xx_register_cpuidle(void)
+{
+ return platform_device_register(&da8xx_cpuidle_device);
+}
+
diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c
index a55b650..1479496 100644
--- a/arch/arm/mach-davinci/devices.c
+++ b/arch/arm/mach-davinci/devices.c
@@ -9,15 +9,11 @@
* (at your option) any later version.
*/
-#include <linux/module.h>
-#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/io.h>
-#include <asm/mach/map.h>
-
#include <mach/hardware.h>
#include <mach/i2c.h>
#include <mach/irqs.h>
@@ -177,7 +173,7 @@
mmcsd1_resources[0].start = DM365_MMCSD1_BASE;
mmcsd1_resources[0].end = DM365_MMCSD1_BASE +
SZ_4K - 1;
- mmcsd0_resources[2].start = IRQ_DM365_SDIOINT1;
+ mmcsd1_resources[2].start = IRQ_DM365_SDIOINT1;
} else
break;
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
index 0596700..dedf4d4 100644
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@@ -8,7 +8,6 @@
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
-#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/clk.h>
#include <linux/serial_8250.h>
@@ -21,7 +20,6 @@
#include <asm/mach/map.h>
#include <mach/dm355.h>
-#include <mach/clock.h>
#include <mach/cputype.h>
#include <mach/edma.h>
#include <mach/psc.h>
diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index e815174..2ec619e 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -12,7 +12,6 @@
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
-#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/clk.h>
#include <linux/serial_8250.h>
@@ -23,7 +22,6 @@
#include <asm/mach/map.h>
#include <mach/dm365.h>
-#include <mach/clock.h>
#include <mach/cputype.h>
#include <mach/edma.h>
#include <mach/psc.h>
@@ -32,6 +30,8 @@
#include <mach/time.h>
#include <mach/serial.h>
#include <mach/common.h>
+#include <mach/asp.h>
+#include <mach/keyscan.h>
#include "clock.h"
#include "mux.h"
@@ -369,7 +369,7 @@
static struct clk usb_clk = {
.name = "usb",
- .parent = &pll2_sysclk1,
+ .parent = &pll1_aux_clk,
.lpsc = DAVINCI_LPSC_USB,
};
@@ -456,7 +456,7 @@
CLK(NULL, "usb", &usb_clk),
CLK("davinci_emac.1", NULL, &emac_clk),
CLK("voice_codec", NULL, &voicecodec_clk),
- CLK("soc-audio.0", NULL, &asp0_clk),
+ CLK("davinci-asp.0", NULL, &asp0_clk),
CLK(NULL, "rto", &rto_clk),
CLK(NULL, "mjcp", &mjcp_clk),
CLK(NULL, NULL, NULL),
@@ -531,7 +531,7 @@
MUX_CFG(DM365, EMAC_MDIO, 3, 1, 1, 1, false)
MUX_CFG(DM365, EMAC_MDCLK, 3, 0, 1, 1, false)
-MUX_CFG(DM365, KEYPAD, 2, 0, 0x3f, 0x3f, false)
+MUX_CFG(DM365, KEYSCAN, 2, 0, 0x3f, 0x3f, false)
MUX_CFG(DM365, PWM0, 1, 0, 3, 2, false)
MUX_CFG(DM365, PWM0_G23, 3, 26, 3, 3, false)
@@ -603,6 +603,9 @@
INT_CFG(DM365, INT_IMX1_DISABLE, 24, 1, 0, false)
INT_CFG(DM365, INT_NSF_ENABLE, 25, 1, 1, false)
INT_CFG(DM365, INT_NSF_DISABLE, 25, 1, 0, false)
+
+EVT_CFG(DM365, EVT2_ASP_TX, 0, 1, 0, false)
+EVT_CFG(DM365, EVT3_ASP_RX, 1, 1, 0, false)
#endif
};
@@ -696,6 +699,7 @@
[IRQ_I2C] = 3,
[IRQ_UARTINT0] = 3,
[IRQ_UARTINT1] = 3,
+ [IRQ_DM365_RTCINT] = 3,
[IRQ_DM365_SPIINT0_0] = 3,
[IRQ_DM365_SPIINT3_0] = 3,
[IRQ_DM365_GPIO0] = 3,
@@ -806,6 +810,50 @@
.resource = edma_resources,
};
+static struct resource dm365_asp_resources[] = {
+ {
+ .start = DAVINCI_DM365_ASP0_BASE,
+ .end = DAVINCI_DM365_ASP0_BASE + SZ_8K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = DAVINCI_DMA_ASP0_TX,
+ .end = DAVINCI_DMA_ASP0_TX,
+ .flags = IORESOURCE_DMA,
+ },
+ {
+ .start = DAVINCI_DMA_ASP0_RX,
+ .end = DAVINCI_DMA_ASP0_RX,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+static struct platform_device dm365_asp_device = {
+ .name = "davinci-asp",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(dm365_asp_resources),
+ .resource = dm365_asp_resources,
+};
+
+static struct resource dm365_rtc_resources[] = {
+ {
+ .start = DM365_RTC_BASE,
+ .end = DM365_RTC_BASE + SZ_1K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_DM365_RTCINT,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device dm365_rtc_device = {
+ .name = "rtc_davinci",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(dm365_rtc_resources),
+ .resource = dm365_rtc_resources,
+};
+
static struct map_desc dm365_io_desc[] = {
{
.virtual = IO_VIRT,
@@ -822,6 +870,28 @@
},
};
+static struct resource dm365_ks_resources[] = {
+ {
+ /* registers */
+ .start = DM365_KEYSCAN_BASE,
+ .end = DM365_KEYSCAN_BASE + SZ_1K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ /* interrupt */
+ .start = IRQ_DM365_KEYINT,
+ .end = IRQ_DM365_KEYINT,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device dm365_ks_device = {
+ .name = "davinci_keyscan",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(dm365_ks_resources),
+ .resource = dm365_ks_resources,
+};
+
/* Contents of JTAG ID register used to identify exact cpu type */
static struct davinci_id dm365_ids[] = {
{
@@ -907,6 +977,33 @@
.sram_len = SZ_32K,
};
+void __init dm365_init_asp(struct snd_platform_data *pdata)
+{
+ davinci_cfg_reg(DM365_MCBSP0_BDX);
+ davinci_cfg_reg(DM365_MCBSP0_X);
+ davinci_cfg_reg(DM365_MCBSP0_BFSX);
+ davinci_cfg_reg(DM365_MCBSP0_BDR);
+ davinci_cfg_reg(DM365_MCBSP0_R);
+ davinci_cfg_reg(DM365_MCBSP0_BFSR);
+ davinci_cfg_reg(DM365_EVT2_ASP_TX);
+ davinci_cfg_reg(DM365_EVT3_ASP_RX);
+ dm365_asp_device.dev.platform_data = pdata;
+ platform_device_register(&dm365_asp_device);
+}
+
+void __init dm365_init_ks(struct davinci_ks_platform_data *pdata)
+{
+ davinci_cfg_reg(DM365_KEYSCAN);
+ dm365_ks_device.dev.platform_data = pdata;
+ platform_device_register(&dm365_ks_device);
+}
+
+void __init dm365_init_rtc(void)
+{
+ davinci_cfg_reg(DM365_INT_PRTCSS);
+ platform_device_register(&dm365_rtc_device);
+}
+
void __init dm365_init(void)
{
davinci_common_init(&davinci_soc_info_dm365);
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
index d6e0fa5..2cd0081 100644
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -8,7 +8,6 @@
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
-#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/clk.h>
#include <linux/serial_8250.h>
@@ -18,7 +17,6 @@
#include <asm/mach/map.h>
#include <mach/dm644x.h>
-#include <mach/clock.h>
#include <mach/cputype.h>
#include <mach/edma.h>
#include <mach/irqs.h>
@@ -370,6 +368,11 @@
MUX_CFG(DM644X, HPIEN_DISABLE, 0, 29, 1, 0, true)
MUX_CFG(DM644X, AEAW, 0, 0, 31, 31, true)
+MUX_CFG(DM644X, AEAW0, 0, 0, 1, 0, true)
+MUX_CFG(DM644X, AEAW1, 0, 1, 1, 0, true)
+MUX_CFG(DM644X, AEAW2, 0, 2, 1, 0, true)
+MUX_CFG(DM644X, AEAW3, 0, 3, 1, 0, true)
+MUX_CFG(DM644X, AEAW4, 0, 4, 1, 0, true)
MUX_CFG(DM644X, MSTK, 1, 9, 1, 0, false)
diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c
index 0976049..829a44b 100644
--- a/arch/arm/mach-davinci/dm646x.c
+++ b/arch/arm/mach-davinci/dm646x.c
@@ -8,7 +8,6 @@
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
-#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/clk.h>
#include <linux/serial_8250.h>
@@ -18,7 +17,6 @@
#include <asm/mach/map.h>
#include <mach/dm646x.h>
-#include <mach/clock.h>
#include <mach/cputype.h>
#include <mach/edma.h>
#include <mach/irqs.h>
@@ -789,7 +787,14 @@
.part_no = 0xb770,
.manufacturer = 0x017,
.cpu_id = DAVINCI_CPU_ID_DM6467,
- .name = "dm6467",
+ .name = "dm6467_rev1.x",
+ },
+ {
+ .variant = 0x1,
+ .part_no = 0xb770,
+ .manufacturer = 0x017,
+ .cpu_id = DAVINCI_CPU_ID_DM6467,
+ .name = "dm6467_rev3.x",
},
};
diff --git a/arch/arm/mach-davinci/dma.c b/arch/arm/mach-davinci/dma.c
index f2e57d2..648fbb7 100644
--- a/arch/arm/mach-davinci/dma.c
+++ b/arch/arm/mach-davinci/dma.c
@@ -18,22 +18,13 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/kernel.h>
-#include <linux/sched.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
-#include <linux/spinlock.h>
-#include <linux/compiler.h>
#include <linux/io.h>
-#include <mach/cputype.h>
-#include <mach/memory.h>
-#include <mach/hardware.h>
-#include <mach/irqs.h>
#include <mach/edma.h>
-#include <mach/mux.h>
-
/* Offsets matching "struct edmacc_param" */
#define PARM_OPT 0x00
@@ -509,43 +500,59 @@
return IRQ_HANDLED;
}
-static int reserve_contiguous_params(int ctlr, unsigned int id,
- unsigned int num_params,
- unsigned int start_param)
+static int reserve_contiguous_slots(int ctlr, unsigned int id,
+ unsigned int num_slots,
+ unsigned int start_slot)
{
int i, j;
- unsigned int count = num_params;
+ unsigned int count = num_slots;
+ int stop_slot = start_slot;
+ DECLARE_BITMAP(tmp_inuse, EDMA_MAX_PARAMENTRY);
- for (i = start_param; i < edma_info[ctlr]->num_slots; ++i) {
+ for (i = start_slot; i < edma_info[ctlr]->num_slots; ++i) {
j = EDMA_CHAN_SLOT(i);
- if (!test_and_set_bit(j, edma_info[ctlr]->edma_inuse))
+ if (!test_and_set_bit(j, edma_info[ctlr]->edma_inuse)) {
+ /* Record our current beginning slot */
+ if (count == num_slots)
+ stop_slot = i;
+
count--;
+ set_bit(j, tmp_inuse);
+
if (count == 0)
break;
- else if (id == EDMA_CONT_PARAMS_FIXED_EXACT)
- break;
- else
- count = num_params;
+ } else {
+ clear_bit(j, tmp_inuse);
+
+ if (id == EDMA_CONT_PARAMS_FIXED_EXACT) {
+ stop_slot = i;
+ break;
+ } else
+ count = num_slots;
+ }
}
/*
* We have to clear any bits that we set
- * if we run out parameter RAMs, i.e we do find a set
- * of contiguous parameter RAMs but do not find the exact number
- * requested as we may reach the total number of parameter RAMs
+ * if we run out parameter RAM slots, i.e we do find a set
+ * of contiguous parameter RAM slots but do not find the exact number
+ * requested as we may reach the total number of parameter RAM slots
*/
- if (count) {
- for (j = i - num_params + count + 1; j <= i ; ++j)
+ if (i == edma_info[ctlr]->num_slots)
+ stop_slot = i;
+
+ for (j = start_slot; j < stop_slot; j++)
+ if (test_bit(j, tmp_inuse))
clear_bit(j, edma_info[ctlr]->edma_inuse);
+ if (count)
return -EBUSY;
- }
- for (j = i - num_params + 1; j <= i; ++j)
+ for (j = i - num_slots + 1; j <= i; ++j)
memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(j),
&dummy_paramset, PARM_SIZE);
- return EDMA_CTLR_CHAN(ctlr, i - num_params + 1);
+ return EDMA_CTLR_CHAN(ctlr, i - num_slots + 1);
}
/*-----------------------------------------------------------------------*/
@@ -743,26 +750,27 @@
/**
* edma_alloc_cont_slots- alloc contiguous parameter RAM slots
* The API will return the starting point of a set of
- * contiguous PARAM's that have been requested
+ * contiguous parameter RAM slots that have been requested
*
* @id: can only be EDMA_CONT_PARAMS_ANY or EDMA_CONT_PARAMS_FIXED_EXACT
* or EDMA_CONT_PARAMS_FIXED_NOT_EXACT
- * @count: number of contiguous Paramter RAM's
- * @param - the start value of Parameter RAM that should be passed if id
+ * @count: number of contiguous Paramter RAM slots
+ * @slot - the start value of Parameter RAM slot that should be passed if id
* is EDMA_CONT_PARAMS_FIXED_EXACT or EDMA_CONT_PARAMS_FIXED_NOT_EXACT
*
* If id is EDMA_CONT_PARAMS_ANY then the API starts looking for a set of
- * contiguous Parameter RAMs from parameter RAM 64 in the case of DaVinci SOCs
- * and 32 in the case of Primus
+ * contiguous Parameter RAM slots from parameter RAM 64 in the case of
+ * DaVinci SOCs and 32 in the case of DA8xx SOCs.
*
* If id is EDMA_CONT_PARAMS_FIXED_EXACT then the API starts looking for a
- * set of contiguous parameter RAMs from the "param" that is passed as an
+ * set of contiguous parameter RAM slots from the "slot" that is passed as an
* argument to the API.
*
* If id is EDMA_CONT_PARAMS_FIXED_NOT_EXACT then the API initially tries
- * starts looking for a set of contiguous parameter RAMs from the "param"
+ * starts looking for a set of contiguous parameter RAMs from the "slot"
* that is passed as an argument to the API. On failure the API will try to
- * find a set of contiguous Parameter RAMs in the remaining Parameter RAMs
+ * find a set of contiguous Parameter RAM slots from the remaining Parameter
+ * RAM slots
*/
int edma_alloc_cont_slots(unsigned ctlr, unsigned int id, int slot, int count)
{
@@ -771,12 +779,13 @@
* the number of channels and lesser than the total number
* of slots
*/
- if (slot < edma_info[ctlr]->num_channels ||
- slot >= edma_info[ctlr]->num_slots)
+ if ((id != EDMA_CONT_PARAMS_ANY) &&
+ (slot < edma_info[ctlr]->num_channels ||
+ slot >= edma_info[ctlr]->num_slots))
return -EINVAL;
/*
- * The number of parameter RAMs requested cannot be less than 1
+ * The number of parameter RAM slots requested cannot be less than 1
* and cannot be more than the number of slots minus the number of
* channels
*/
@@ -786,11 +795,11 @@
switch (id) {
case EDMA_CONT_PARAMS_ANY:
- return reserve_contiguous_params(ctlr, id, count,
+ return reserve_contiguous_slots(ctlr, id, count,
edma_info[ctlr]->num_channels);
case EDMA_CONT_PARAMS_FIXED_EXACT:
case EDMA_CONT_PARAMS_FIXED_NOT_EXACT:
- return reserve_contiguous_params(ctlr, id, count, slot);
+ return reserve_contiguous_slots(ctlr, id, count, slot);
default:
return -EINVAL;
}
@@ -799,21 +808,21 @@
EXPORT_SYMBOL(edma_alloc_cont_slots);
/**
- * edma_free_cont_slots - deallocate DMA parameter RAMs
- * @slot: first parameter RAM of a set of parameter RAMs to be freed
- * @count: the number of contiguous parameter RAMs to be freed
+ * edma_free_cont_slots - deallocate DMA parameter RAM slots
+ * @slot: first parameter RAM of a set of parameter RAM slots to be freed
+ * @count: the number of contiguous parameter RAM slots to be freed
*
* This deallocates the parameter RAM slots allocated by
* edma_alloc_cont_slots.
* Callers/applications need to keep track of sets of contiguous
- * parameter RAMs that have been allocated using the edma_alloc_cont_slots
+ * parameter RAM slots that have been allocated using the edma_alloc_cont_slots
* API.
* Callers are responsible for ensuring the slots are inactive, and will
* not be activated.
*/
int edma_free_cont_slots(unsigned slot, int count)
{
- unsigned ctlr;
+ unsigned ctlr, slot_to_free;
int i;
ctlr = EDMA_CTLR(slot);
@@ -826,11 +835,11 @@
for (i = slot; i < slot + count; ++i) {
ctlr = EDMA_CTLR(i);
- slot = EDMA_CHAN_SLOT(i);
+ slot_to_free = EDMA_CHAN_SLOT(i);
- memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(slot),
+ memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(slot_to_free),
&dummy_paramset, PARM_SIZE);
- clear_bit(slot, edma_info[ctlr]->edma_inuse);
+ clear_bit(slot_to_free, edma_info[ctlr]->edma_inuse);
}
return 0;
diff --git a/arch/arm/mach-davinci/gpio.c b/arch/arm/mach-davinci/gpio.c
index f6ea9db..744755b 100644
--- a/arch/arm/mach-davinci/gpio.c
+++ b/arch/arm/mach-davinci/gpio.c
@@ -12,23 +12,14 @@
#include <linux/errno.h>
#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/module.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/bitops.h>
-#include <mach/cputype.h>
-#include <mach/irqs.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
#include <mach/gpio.h>
#include <asm/mach/irq.h>
-
static DEFINE_SPINLOCK(gpio_lock);
struct davinci_gpio {
diff --git a/arch/arm/mach-davinci/include/mach/asp.h b/arch/arm/mach-davinci/include/mach/asp.h
index e07f70e..834725f 100644
--- a/arch/arm/mach-davinci/include/mach/asp.h
+++ b/arch/arm/mach-davinci/include/mach/asp.h
@@ -11,6 +11,9 @@
#define DAVINCI_ASP0_BASE 0x01E02000
#define DAVINCI_ASP1_BASE 0x01E04000
+/* Bases of dm365 register banks */
+#define DAVINCI_DM365_ASP0_BASE 0x01D02000
+
/* Bases of dm646x register banks */
#define DAVINCI_DM646X_MCASP0_REG_BASE 0x01D01000
#define DAVINCI_DM646X_MCASP1_REG_BASE 0x01D01800
diff --git a/arch/arm/mach-davinci/include/mach/common.h b/arch/arm/mach-davinci/include/mach/common.h
index 1fd3917..6ca2c9a 100644
--- a/arch/arm/mach-davinci/include/mach/common.h
+++ b/arch/arm/mach-davinci/include/mach/common.h
@@ -20,12 +20,6 @@
extern void __iomem *davinci_intc_base;
extern int davinci_intc_type;
-/* parameters describe VBUS sourcing for host mode */
-extern void setup_usb(unsigned mA, unsigned potpgt_msec);
-
-/* parameters describe VBUS sourcing for host mode */
-extern void setup_usb(unsigned mA, unsigned potpgt_msec);
-
struct davinci_timer_instance {
void __iomem *base;
u32 bottom_irq;
diff --git a/arch/arm/mach-davinci/include/mach/cpufreq.h b/arch/arm/mach-davinci/include/mach/cpufreq.h
new file mode 100644
index 0000000..3c089cf
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/cpufreq.h
@@ -0,0 +1,26 @@
+/*
+ * TI DaVinci CPUFreq platform support.
+ *
+ * Copyright (C) 2009 Texas Instruments, Inc. http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#ifndef _MACH_DAVINCI_CPUFREQ_H
+#define _MACH_DAVINCI_CPUFREQ_H
+
+#include <linux/cpufreq.h>
+
+struct davinci_cpufreq_config {
+ struct cpufreq_frequency_table *freq_table;
+ int (*set_voltage) (unsigned int index);
+ int (*init) (void);
+};
+
+#endif
diff --git a/arch/arm/mach-davinci/include/mach/cpuidle.h b/arch/arm/mach-davinci/include/mach/cpuidle.h
new file mode 100644
index 0000000..cbfc6a9
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/cpuidle.h
@@ -0,0 +1,17 @@
+/*
+ * TI DaVinci cpuidle platform support
+ *
+ * 2009 (C) Texas Instruments, Inc. http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+#ifndef _MACH_DAVINCI_CPUIDLE_H
+#define _MACH_DAVINCI_CPUIDLE_H
+
+struct davinci_cpuidle_config {
+ u32 ddr2_pdown;
+};
+
+#endif
diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h
index d4095d0..9070491 100644
--- a/arch/arm/mach-davinci/include/mach/da8xx.h
+++ b/arch/arm/mach-davinci/include/mach/da8xx.h
@@ -11,12 +11,17 @@
#ifndef __ASM_ARCH_DAVINCI_DA8XX_H
#define __ASM_ARCH_DAVINCI_DA8XX_H
+#include <video/da8xx-fb.h>
+
#include <mach/serial.h>
#include <mach/edma.h>
#include <mach/i2c.h>
#include <mach/emac.h>
#include <mach/asp.h>
#include <mach/mmc.h>
+#include <mach/usb.h>
+
+extern void __iomem *da8xx_syscfg_base;
/*
* The cp_intc interrupt controller for the da8xx isn't in the same
@@ -29,11 +34,15 @@
#define DA8XX_CP_INTC_SIZE SZ_8K
#define DA8XX_CP_INTC_VIRT (IO_VIRT - DA8XX_CP_INTC_SIZE - SZ_4K)
-#define DA8XX_BOOT_CFG_BASE (IO_PHYS + 0x14000)
+#define DA8XX_SYSCFG_BASE (IO_PHYS + 0x14000)
+#define DA8XX_SYSCFG_VIRT(x) (da8xx_syscfg_base + (x))
+#define DA8XX_JTAG_ID_REG 0x18
+#define DA8XX_CFGCHIP0_REG 0x17c
+#define DA8XX_CFGCHIP2_REG 0x184
+#define DA8XX_CFGCHIP3_REG 0x188
#define DA8XX_PSC0_BASE 0x01c10000
#define DA8XX_PLL0_BASE 0x01c11000
-#define DA8XX_JTAG_ID_REG 0x01c14018
#define DA8XX_TIMER64P0_BASE 0x01c20000
#define DA8XX_TIMER64P1_BASE 0x01c21000
#define DA8XX_GPIO_BASE 0x01e26000
@@ -43,6 +52,7 @@
#define DA8XX_AEMIF_CS2_BASE 0x60000000
#define DA8XX_AEMIF_CS3_BASE 0x62000000
#define DA8XX_AEMIF_CTL_BASE 0x68000000
+#define DA8XX_DDR2_CTL_BASE 0xb0000000
#define PINMUX0 0x00
#define PINMUX1 0x04
@@ -71,13 +81,20 @@
int da8xx_register_edma(void);
int da8xx_register_i2c(int instance, struct davinci_i2c_platform_data *pdata);
int da8xx_register_watchdog(void);
+int da8xx_register_usb20(unsigned mA, unsigned potpgt);
+int da8xx_register_usb11(struct da8xx_ohci_root_hub *pdata);
int da8xx_register_emac(void);
-int da8xx_register_lcdc(void);
+int da8xx_register_lcdc(struct da8xx_lcdc_platform_data *pdata);
int da8xx_register_mmcsd0(struct davinci_mmc_config *config);
-void __init da8xx_init_mcasp(int id, struct snd_platform_data *pdata);
+void __init da8xx_register_mcasp(int id, struct snd_platform_data *pdata);
+int da8xx_register_rtc(void);
+int da850_register_cpufreq(void);
+int da8xx_register_cpuidle(void);
extern struct platform_device da8xx_serial_device;
extern struct emac_platform_data da8xx_emac_pdata;
+extern struct da8xx_lcdc_platform_data sharp_lcd035q3dg01_pdata;
+extern struct da8xx_lcdc_platform_data sharp_lk043t1dg01_pdata;
extern const short da830_emif25_pins[];
extern const short da830_spi0_pins[];
@@ -110,6 +127,7 @@
extern const short da850_i2c0_pins[];
extern const short da850_i2c1_pins[];
extern const short da850_cpgmac_pins[];
+extern const short da850_rmii_pins[];
extern const short da850_mcasp_pins[];
extern const short da850_lcdcntl_pins[];
extern const short da850_mmcsd0_pins[];
diff --git a/arch/arm/mach-davinci/include/mach/dm365.h b/arch/arm/mach-davinci/include/mach/dm365.h
index 09db434..f1710a3 100644
--- a/arch/arm/mach-davinci/include/mach/dm365.h
+++ b/arch/arm/mach-davinci/include/mach/dm365.h
@@ -16,6 +16,8 @@
#include <linux/platform_device.h>
#include <mach/hardware.h>
#include <mach/emac.h>
+#include <mach/asp.h>
+#include <mach/keyscan.h>
#define DM365_EMAC_BASE (0x01D07000)
#define DM365_EMAC_CNTRL_OFFSET (0x0000)
@@ -24,6 +26,14 @@
#define DM365_EMAC_MDIO_OFFSET (0x4000)
#define DM365_EMAC_CNTRL_RAM_SIZE (0x2000)
+/* Base of key scan register bank */
+#define DM365_KEYSCAN_BASE (0x01C69400)
+
+#define DM365_RTC_BASE (0x01C69000)
+
void __init dm365_init(void);
+void __init dm365_init_asp(struct snd_platform_data *pdata);
+void __init dm365_init_ks(struct davinci_ks_platform_data *pdata);
+void __init dm365_init_rtc(void);
#endif /* __ASM_ARCH_DM365_H */
diff --git a/arch/arm/mach-davinci/include/mach/dm644x.h b/arch/arm/mach-davinci/include/mach/dm644x.h
index 0efb738..44e8f0f 100644
--- a/arch/arm/mach-davinci/include/mach/dm644x.h
+++ b/arch/arm/mach-davinci/include/mach/dm644x.h
@@ -22,7 +22,6 @@
#ifndef __ASM_ARCH_DM644X_H
#define __ASM_ARCH_DM644X_H
-#include <linux/platform_device.h>
#include <mach/hardware.h>
#include <mach/emac.h>
#include <mach/asp.h>
diff --git a/arch/arm/mach-davinci/include/mach/irqs.h b/arch/arm/mach-davinci/include/mach/irqs.h
index 3c918a7..354af71 100644
--- a/arch/arm/mach-davinci/include/mach/irqs.h
+++ b/arch/arm/mach-davinci/include/mach/irqs.h
@@ -217,6 +217,7 @@
#define IRQ_DM365_SDIOINT0 23
#define IRQ_DM365_MMCINT1 27
#define IRQ_DM365_PWMINT3 28
+#define IRQ_DM365_RTCINT 29
#define IRQ_DM365_SDIOINT1 31
#define IRQ_DM365_SPIINT0_0 42
#define IRQ_DM365_SPIINT3_0 43
diff --git a/arch/arm/mach-davinci/include/mach/keyscan.h b/arch/arm/mach-davinci/include/mach/keyscan.h
new file mode 100644
index 0000000..b4e21a2
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/keyscan.h
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2009 Texas Instruments, Inc
+ *
+ * Author: Miguel Aguilar <miguel.aguilar@ridgerun.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef DAVINCI_KEYSCAN_H
+#define DAVINCI_KEYSCAN_H
+
+#include <linux/io.h>
+
+enum davinci_matrix_types {
+ DAVINCI_KEYSCAN_MATRIX_4X4,
+ DAVINCI_KEYSCAN_MATRIX_5X3,
+};
+
+struct davinci_ks_platform_data {
+ unsigned short *keymap;
+ u32 keymapsize;
+ u8 rep:1;
+ u8 strobe;
+ u8 interval;
+ u8 matrix_type;
+};
+
+#endif
+
diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h
index bb84893..b60c693 100644
--- a/arch/arm/mach-davinci/include/mach/mux.h
+++ b/arch/arm/mach-davinci/include/mach/mux.h
@@ -40,6 +40,11 @@
/* AEAW functions */
DM644X_AEAW,
+ DM644X_AEAW0,
+ DM644X_AEAW1,
+ DM644X_AEAW2,
+ DM644X_AEAW3,
+ DM644X_AEAW4,
/* Memory Stick */
DM644X_MSTK,
@@ -237,8 +242,8 @@
DM365_EMAC_MDIO,
DM365_EMAC_MDCLK,
- /* Keypad */
- DM365_KEYPAD,
+ /* Key Scan */
+ DM365_KEYSCAN,
/* PWM */
DM365_PWM0,
@@ -774,6 +779,14 @@
DA850_MII_RXD_0,
DA850_MDIO_CLK,
DA850_MDIO_D,
+ DA850_RMII_TXD_0,
+ DA850_RMII_TXD_1,
+ DA850_RMII_TXEN,
+ DA850_RMII_CRS_DV,
+ DA850_RMII_RXD_0,
+ DA850_RMII_RXD_1,
+ DA850_RMII_RXER,
+ DA850_RMII_MHZ_50_CLK,
/* McASP function */
DA850_ACLKR,
@@ -881,8 +894,9 @@
DA850_NEMA_CS_2,
/* GPIO function */
+ DA850_GPIO2_6,
+ DA850_GPIO2_8,
DA850_GPIO2_15,
- DA850_GPIO8_10,
DA850_GPIO4_0,
DA850_GPIO4_1,
};
diff --git a/arch/arm/mach-davinci/include/mach/system.h b/arch/arm/mach-davinci/include/mach/system.h
index 8e4f10f..5a7d758 100644
--- a/arch/arm/mach-davinci/include/mach/system.h
+++ b/arch/arm/mach-davinci/include/mach/system.h
@@ -11,9 +11,6 @@
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
-#include <linux/io.h>
-#include <mach/hardware.h>
-
extern void davinci_watchdog_reset(void);
static inline void arch_idle(void)
diff --git a/arch/arm/mach-davinci/include/mach/usb.h b/arch/arm/mach-davinci/include/mach/usb.h
new file mode 100644
index 0000000..e0bc4ab
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/usb.h
@@ -0,0 +1,59 @@
+/*
+ * USB related definitions
+ *
+ * Copyright (C) 2009 MontaVista Software, Inc. <source@mvista.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_USB_H
+#define __ASM_ARCH_USB_H
+
+/* DA8xx CFGCHIP2 (USB 2.0 PHY Control) register bits */
+#define CFGCHIP2_PHYCLKGD (1 << 17)
+#define CFGCHIP2_VBUSSENSE (1 << 16)
+#define CFGCHIP2_RESET (1 << 15)
+#define CFGCHIP2_OTGMODE (3 << 13)
+#define CFGCHIP2_NO_OVERRIDE (0 << 13)
+#define CFGCHIP2_FORCE_HOST (1 << 13)
+#define CFGCHIP2_FORCE_DEVICE (2 << 13)
+#define CFGCHIP2_FORCE_HOST_VBUS_LOW (3 << 13)
+#define CFGCHIP2_USB1PHYCLKMUX (1 << 12)
+#define CFGCHIP2_USB2PHYCLKMUX (1 << 11)
+#define CFGCHIP2_PHYPWRDN (1 << 10)
+#define CFGCHIP2_OTGPWRDN (1 << 9)
+#define CFGCHIP2_DATPOL (1 << 8)
+#define CFGCHIP2_USB1SUSPENDM (1 << 7)
+#define CFGCHIP2_PHY_PLLON (1 << 6) /* override PLL suspend */
+#define CFGCHIP2_SESENDEN (1 << 5) /* Vsess_end comparator */
+#define CFGCHIP2_VBDTCTEN (1 << 4) /* Vbus comparator */
+#define CFGCHIP2_REFFREQ (0xf << 0)
+#define CFGCHIP2_REFFREQ_12MHZ (1 << 0)
+#define CFGCHIP2_REFFREQ_24MHZ (2 << 0)
+#define CFGCHIP2_REFFREQ_48MHZ (3 << 0)
+
+struct da8xx_ohci_root_hub;
+
+typedef void (*da8xx_ocic_handler_t)(struct da8xx_ohci_root_hub *hub,
+ unsigned port);
+
+/* Passed as the platform data to the OHCI driver */
+struct da8xx_ohci_root_hub {
+ /* Switch the port power on/off */
+ int (*set_power)(unsigned port, int on);
+ /* Read the port power status */
+ int (*get_power)(unsigned port);
+ /* Read the port over-current indicator */
+ int (*get_oci)(unsigned port);
+ /* Over-current indicator change notification (pass NULL to disable) */
+ int (*ocic_notify)(da8xx_ocic_handler_t handler);
+
+ /* Time from power on to power good (in 2 ms units) */
+ u8 potpgt;
+};
+
+void davinci_setup_usb(unsigned mA, unsigned potpgt_ms);
+
+#endif /* ifndef __ASM_ARCH_USB_H */
diff --git a/arch/arm/mach-davinci/mux.c b/arch/arm/mach-davinci/mux.c
index 898905e..f757e83 100644
--- a/arch/arm/mach-davinci/mux.c
+++ b/arch/arm/mach-davinci/mux.c
@@ -19,7 +19,6 @@
#include <linux/module.h>
#include <linux/spinlock.h>
-#include <mach/hardware.h>
#include <mach/mux.h>
#include <mach/common.h>
diff --git a/arch/arm/mach-davinci/psc.c b/arch/arm/mach-davinci/psc.c
index a78b657..04a3cb7 100644
--- a/arch/arm/mach-davinci/psc.c
+++ b/arch/arm/mach-davinci/psc.c
@@ -19,14 +19,11 @@
*
*/
#include <linux/kernel.h>
-#include <linux/module.h>
#include <linux/init.h>
#include <linux/io.h>
#include <mach/cputype.h>
-#include <mach/hardware.h>
#include <mach/psc.h>
-#include <mach/mux.h>
/* PSC register offsets */
#define EPCPR 0x070
diff --git a/arch/arm/mach-davinci/serial.c b/arch/arm/mach-davinci/serial.c
index c530c73..7ce5ba0 100644
--- a/arch/arm/mach-davinci/serial.c
+++ b/arch/arm/mach-davinci/serial.c
@@ -28,14 +28,8 @@
#include <linux/clk.h>
#include <linux/io.h>
-#include <asm/irq.h>
-#include <mach/hardware.h>
#include <mach/serial.h>
-#include <mach/irqs.h>
#include <mach/cputype.h>
-#include <mach/common.h>
-
-#include "clock.h"
static inline unsigned int serial_read_reg(struct plat_serial8250_port *up,
int offset)
diff --git a/arch/arm/mach-davinci/sram.c b/arch/arm/mach-davinci/sram.c
index 4f1fc9b..db0f778 100644
--- a/arch/arm/mach-davinci/sram.c
+++ b/arch/arm/mach-davinci/sram.c
@@ -9,15 +9,12 @@
* (at your option) any later version.
*/
#include <linux/module.h>
-#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/genalloc.h>
#include <mach/common.h>
-#include <mach/memory.h>
#include <mach/sram.h>
-
static struct gen_pool *sram_pool;
void *sram_alloc(size_t len, dma_addr_t *dma)
diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c
index 0d1b6d4..42d985b 100644
--- a/arch/arm/mach-davinci/time.c
+++ b/arch/arm/mach-davinci/time.c
@@ -14,20 +14,14 @@
#include <linux/interrupt.h>
#include <linux/clocksource.h>
#include <linux/clockchips.h>
-#include <linux/spinlock.h>
#include <linux/io.h>
#include <linux/clk.h>
#include <linux/err.h>
-#include <linux/device.h>
#include <linux/platform_device.h>
#include <mach/hardware.h>
-#include <asm/system.h>
-#include <asm/irq.h>
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
-#include <asm/errno.h>
-#include <mach/io.h>
#include <mach/cputype.h>
#include <mach/time.h>
#include "clock.h"
diff --git a/arch/arm/mach-davinci/usb.c b/arch/arm/mach-davinci/usb.c
index 06f5593..31f0cbe 100644
--- a/arch/arm/mach-davinci/usb.c
+++ b/arch/arm/mach-davinci/usb.c
@@ -1,21 +1,21 @@
/*
* USB
*/
-#include <linux/kernel.h>
-#include <linux/module.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/usb/musb.h>
-#include <linux/usb/otg.h>
#include <mach/common.h>
-#include <mach/hardware.h>
#include <mach/irqs.h>
#include <mach/cputype.h>
+#include <mach/usb.h>
-#define DAVINCI_USB_OTG_BASE 0x01C64000
+#define DAVINCI_USB_OTG_BASE 0x01c64000
+
+#define DA8XX_USB0_BASE 0x01e00000
+#define DA8XX_USB1_BASE 0x01e25000
#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
static struct musb_hdrc_eps_bits musb_eps[] = {
@@ -85,10 +85,10 @@
.num_resources = ARRAY_SIZE(usb_resources),
};
-void __init setup_usb(unsigned mA, unsigned potpgt_msec)
+void __init davinci_setup_usb(unsigned mA, unsigned potpgt_ms)
{
- usb_data.power = mA / 2;
- usb_data.potpgt = potpgt_msec / 2;
+ usb_data.power = mA > 510 ? 255 : mA / 2;
+ usb_data.potpgt = (potpgt_ms + 1) / 2;
if (cpu_is_davinci_dm646x()) {
/* Override the defaults as DM6467 uses different IRQs. */
@@ -100,11 +100,77 @@
platform_device_register(&usb_dev);
}
+#ifdef CONFIG_ARCH_DAVINCI_DA8XX
+static struct resource da8xx_usb20_resources[] = {
+ {
+ .start = DA8XX_USB0_BASE,
+ .end = DA8XX_USB0_BASE + SZ_64K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_DA8XX_USB_INT,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+int __init da8xx_register_usb20(unsigned mA, unsigned potpgt)
+{
+ usb_data.clock = "usb20";
+ usb_data.power = mA > 510 ? 255 : mA / 2;
+ usb_data.potpgt = (potpgt + 1) / 2;
+
+ usb_dev.resource = da8xx_usb20_resources;
+ usb_dev.num_resources = ARRAY_SIZE(da8xx_usb20_resources);
+
+ return platform_device_register(&usb_dev);
+}
+#endif /* CONFIG_DAVINCI_DA8XX */
+
#else
-void __init setup_usb(unsigned mA, unsigned potpgt_msec)
+void __init davinci_setup_usb(unsigned mA, unsigned potpgt_ms)
{
}
+#ifdef CONFIG_ARCH_DAVINCI_DA8XX
+int __init da8xx_register_usb20(unsigned mA, unsigned potpgt)
+{
+ return 0;
+}
+#endif
+
#endif /* CONFIG_USB_MUSB_HDRC */
+#ifdef CONFIG_ARCH_DAVINCI_DA8XX
+static struct resource da8xx_usb11_resources[] = {
+ [0] = {
+ .start = DA8XX_USB1_BASE,
+ .end = DA8XX_USB1_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_DA8XX_IRQN,
+ .end = IRQ_DA8XX_IRQN,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static u64 da8xx_usb11_dma_mask = DMA_BIT_MASK(32);
+
+static struct platform_device da8xx_usb11_device = {
+ .name = "ohci",
+ .id = 0,
+ .dev = {
+ .dma_mask = &da8xx_usb11_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .num_resources = ARRAY_SIZE(da8xx_usb11_resources),
+ .resource = da8xx_usb11_resources,
+};
+
+int __init da8xx_register_usb11(struct da8xx_ohci_root_hub *pdata)
+{
+ da8xx_usb11_device.dev.platform_data = pdata;
+ return platform_device_register(&da8xx_usb11_device);
+}
+#endif /* CONFIG_DAVINCI_DA8XX */
diff --git a/arch/arm/mach-lh7a40x/include/mach/hardware.h b/arch/arm/mach-lh7a40x/include/mach/hardware.h
index 48e827d..59d2ace 100644
--- a/arch/arm/mach-lh7a40x/include/mach/hardware.h
+++ b/arch/arm/mach-lh7a40x/include/mach/hardware.h
@@ -31,7 +31,7 @@
/*
* This __REG() version gives the same results as the one above, except
* that we are fooling gcc somehow so it generates far better and smaller
- * assembly code for access to contigous registers. It's a shame that gcc
+ * assembly code for access to contiguous registers. It's a shame that gcc
* doesn't guess this by itself.
*/
#include <asm/types.h>
diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c
index 36dc541..bdf96eb 100644
--- a/arch/arm/mach-orion5x/pci.c
+++ b/arch/arm/mach-orion5x/pci.c
@@ -463,7 +463,7 @@
writel(win_enable, PCI_BAR_ENABLE);
/*
- * Disable automatic update of address remaping when writing to BARs.
+ * Disable automatic update of address remapping when writing to BARs.
*/
orion5x_setbits(PCI_ADDR_DECODE_CTRL, 1);
}
diff --git a/arch/arm/mach-pxa/include/mach/palmld.h b/arch/arm/mach-pxa/include/mach/palmld.h
index 8721b80..ae536e8 100644
--- a/arch/arm/mach-pxa/include/mach/palmld.h
+++ b/arch/arm/mach-pxa/include/mach/palmld.h
@@ -91,7 +91,7 @@
/* BATTERY */
#define PALMLD_BAT_MAX_VOLTAGE 4000 /* 4.00V maximum voltage */
#define PALMLD_BAT_MIN_VOLTAGE 3550 /* 3.55V critical voltage */
-#define PALMLD_BAT_MAX_CURRENT 0 /* unknokn */
+#define PALMLD_BAT_MAX_CURRENT 0 /* unknown */
#define PALMLD_BAT_MIN_CURRENT 0 /* unknown */
#define PALMLD_BAT_MAX_CHARGE 1 /* unknown */
#define PALMLD_BAT_MIN_CHARGE 1 /* unknown */
diff --git a/arch/arm/mach-pxa/include/mach/palmt5.h b/arch/arm/mach-pxa/include/mach/palmt5.h
index d15662a..6baf746 100644
--- a/arch/arm/mach-pxa/include/mach/palmt5.h
+++ b/arch/arm/mach-pxa/include/mach/palmt5.h
@@ -66,7 +66,7 @@
/* BATTERY */
#define PALMT5_BAT_MAX_VOLTAGE 4000 /* 4.00v current voltage */
#define PALMT5_BAT_MIN_VOLTAGE 3550 /* 3.55v critical voltage */
-#define PALMT5_BAT_MAX_CURRENT 0 /* unknokn */
+#define PALMT5_BAT_MAX_CURRENT 0 /* unknown */
#define PALMT5_BAT_MIN_CURRENT 0 /* unknown */
#define PALMT5_BAT_MAX_CHARGE 1 /* unknown */
#define PALMT5_BAT_MIN_CHARGE 1 /* unknown */
diff --git a/arch/arm/mach-pxa/include/mach/palmtc.h b/arch/arm/mach-pxa/include/mach/palmtc.h
index 3dc9b07..3f9dd3f 100644
--- a/arch/arm/mach-pxa/include/mach/palmtc.h
+++ b/arch/arm/mach-pxa/include/mach/palmtc.h
@@ -68,7 +68,7 @@
/* BATTERY */
#define PALMTC_BAT_MAX_VOLTAGE 4000 /* 4.00V maximum voltage */
#define PALMTC_BAT_MIN_VOLTAGE 3550 /* 3.55V critical voltage */
-#define PALMTC_BAT_MAX_CURRENT 0 /* unknokn */
+#define PALMTC_BAT_MAX_CURRENT 0 /* unknown */
#define PALMTC_BAT_MIN_CURRENT 0 /* unknown */
#define PALMTC_BAT_MAX_CHARGE 1 /* unknown */
#define PALMTC_BAT_MIN_CHARGE 1 /* unknown */
diff --git a/arch/arm/mach-pxa/include/mach/palmte2.h b/arch/arm/mach-pxa/include/mach/palmte2.h
index 1236134..f89e989 100644
--- a/arch/arm/mach-pxa/include/mach/palmte2.h
+++ b/arch/arm/mach-pxa/include/mach/palmte2.h
@@ -59,7 +59,7 @@
/* BATTERY */
#define PALMTE2_BAT_MAX_VOLTAGE 4000 /* 4.00v current voltage */
#define PALMTE2_BAT_MIN_VOLTAGE 3550 /* 3.55v critical voltage */
-#define PALMTE2_BAT_MAX_CURRENT 0 /* unknokn */
+#define PALMTE2_BAT_MAX_CURRENT 0 /* unknown */
#define PALMTE2_BAT_MIN_CURRENT 0 /* unknown */
#define PALMTE2_BAT_MAX_CHARGE 1 /* unknown */
#define PALMTE2_BAT_MIN_CHARGE 1 /* unknown */
diff --git a/arch/arm/mach-pxa/include/mach/palmtx.h b/arch/arm/mach-pxa/include/mach/palmtx.h
index 1be0db6..10abc4f 100644
--- a/arch/arm/mach-pxa/include/mach/palmtx.h
+++ b/arch/arm/mach-pxa/include/mach/palmtx.h
@@ -94,7 +94,7 @@
/* BATTERY */
#define PALMTX_BAT_MAX_VOLTAGE 4000 /* 4.00v current voltage */
#define PALMTX_BAT_MIN_VOLTAGE 3550 /* 3.55v critical voltage */
-#define PALMTX_BAT_MAX_CURRENT 0 /* unknokn */
+#define PALMTX_BAT_MAX_CURRENT 0 /* unknown */
#define PALMTX_BAT_MIN_CURRENT 0 /* unknown */
#define PALMTX_BAT_MAX_CHARGE 1 /* unknown */
#define PALMTX_BAT_MIN_CHARGE 1 /* unknown */
diff --git a/arch/arm/mach-pxa/include/mach/palmz72.h b/arch/arm/mach-pxa/include/mach/palmz72.h
index 2806ef6..2bbcf70 100644
--- a/arch/arm/mach-pxa/include/mach/palmz72.h
+++ b/arch/arm/mach-pxa/include/mach/palmz72.h
@@ -49,7 +49,7 @@
/* Battery */
#define PALMZ72_BAT_MAX_VOLTAGE 4000 /* 4.00v current voltage */
#define PALMZ72_BAT_MIN_VOLTAGE 3550 /* 3.55v critical voltage */
-#define PALMZ72_BAT_MAX_CURRENT 0 /* unknokn */
+#define PALMZ72_BAT_MAX_CURRENT 0 /* unknown */
#define PALMZ72_BAT_MIN_CURRENT 0 /* unknown */
#define PALMZ72_BAT_MAX_CHARGE 1 /* unknown */
#define PALMZ72_BAT_MIN_CHARGE 1 /* unknown */
diff --git a/arch/arm/mach-s3c2400/Kconfig b/arch/arm/mach-s3c2400/Kconfig
index deab072..fdd8f5e 100644
--- a/arch/arm/mach-s3c2400/Kconfig
+++ b/arch/arm/mach-s3c2400/Kconfig
@@ -1,13 +1,7 @@
-# arch/arm/mach-s3c2400/Kconfig
-#
# Copyright 2007 Simtec Electronics
#
# Licensed under GPLv2
-
-
menu "S3C2400 Machines"
-
endmenu
-
diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index dd1fcc7..5547318 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -1,5 +1,3 @@
-# arch/arm/mach-s3c2410/Kconfig
-#
# Copyright 2007 Simtec Electronics
#
# Licensed under GPLv2
diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig
index c2bdc46..9a8c065 100644
--- a/arch/arm/mach-s3c2412/Kconfig
+++ b/arch/arm/mach-s3c2412/Kconfig
@@ -1,5 +1,3 @@
-# arch/arm/mach-s3c2412/Kconfig
-#
# Copyright 2007 Simtec Electronics
#
# Licensed under GPLv2
@@ -90,6 +88,4 @@
help
Say Y here if you are using an VSTMS board
-
endmenu
-
diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
index cf10e14..8087935 100644
--- a/arch/arm/mach-s3c2440/Kconfig
+++ b/arch/arm/mach-s3c2440/Kconfig
@@ -1,5 +1,3 @@
-# arch/arm/mach-s3c2440/Kconfig
-#
# Copyright 2007 Simtec Electronics
#
# Licensed under GPLv2
@@ -122,4 +120,3 @@
available via various sources. It can come with a 3.5" or 7" touch LCD.
endmenu
-
diff --git a/arch/arm/mach-s3c2442/Kconfig b/arch/arm/mach-s3c2442/Kconfig
index 103e913..8d38118 100644
--- a/arch/arm/mach-s3c2442/Kconfig
+++ b/arch/arm/mach-s3c2442/Kconfig
@@ -1,5 +1,3 @@
-# arch/arm/mach-s3c2442/Kconfig
-#
# Copyright 2007 Simtec Electronics
#
# Licensed under GPLv2
@@ -36,6 +34,4 @@
help
Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone
-
endmenu
-
diff --git a/arch/arm/mach-s3c2443/Kconfig b/arch/arm/mach-s3c2443/Kconfig
index 212141b..4314c44 100644
--- a/arch/arm/mach-s3c2443/Kconfig
+++ b/arch/arm/mach-s3c2443/Kconfig
@@ -1,5 +1,3 @@
-# arch/arm/mach-s3c2443/Kconfig
-#
# Copyright 2007 Simtec Electronics
#
# Licensed under GPLv2
diff --git a/arch/arm/mach-s3c6400/Kconfig b/arch/arm/mach-s3c6400/Kconfig
index 770b720..a250bf6 100644
--- a/arch/arm/mach-s3c6400/Kconfig
+++ b/arch/arm/mach-s3c6400/Kconfig
@@ -1,5 +1,3 @@
-# arch/arm/mach-s3c6400/Kconfig
-#
# Copyright 2008 Openmoko, Inc.
# Simtec Electronics, Ben Dooks <ben@simtec.co.uk>
#
diff --git a/arch/arm/mach-s3c6400/setup-sdhci.c b/arch/arm/mach-s3c6400/setup-sdhci.c
index b93dafb..1039937 100644
--- a/arch/arm/mach-s3c6400/setup-sdhci.c
+++ b/arch/arm/mach-s3c6400/setup-sdhci.c
@@ -30,7 +30,7 @@
[0] = "hsmmc",
[1] = "hsmmc",
[2] = "mmc_bus",
- /* [3] = "48m", - note not succesfully used yet */
+ /* [3] = "48m", - note not successfully used yet */
};
void s3c6400_setup_sdhci_cfg_card(struct platform_device *dev,
diff --git a/arch/arm/mach-s3c6410/Kconfig b/arch/arm/mach-s3c6410/Kconfig
index 72d4b11..162f456 100644
--- a/arch/arm/mach-s3c6410/Kconfig
+++ b/arch/arm/mach-s3c6410/Kconfig
@@ -1,5 +1,3 @@
-# arch/arm/mach-s3c6410/Kconfig
-#
# Copyright 2008 Openmoko, Inc.
# Copyright 2008 Simtec Electronics
#
diff --git a/arch/arm/mach-s3c6410/setup-sdhci.c b/arch/arm/mach-s3c6410/setup-sdhci.c
index 20666f3..816d2d9 100644
--- a/arch/arm/mach-s3c6410/setup-sdhci.c
+++ b/arch/arm/mach-s3c6410/setup-sdhci.c
@@ -30,7 +30,7 @@
[0] = "hsmmc",
[1] = "hsmmc",
[2] = "mmc_bus",
- /* [3] = "48m", - note not succesfully used yet */
+ /* [3] = "48m", - note not successfully used yet */
};
diff --git a/arch/arm/mach-s5pc100/Kconfig b/arch/arm/mach-s5pc100/Kconfig
index 0dd2b8c..27ec167 100644
--- a/arch/arm/mach-s5pc100/Kconfig
+++ b/arch/arm/mach-s5pc100/Kconfig
@@ -1,5 +1,3 @@
-# arch/arm/mach-s5pc100/Kconfig
-#
# Copyright 2009 Samsung Electronics Co.
# Byungho Min <bhmin@samsung.com>
#
diff --git a/arch/arm/mach-sa1100/dma.c b/arch/arm/mach-sa1100/dma.c
index cb4521a..ad66035 100644
--- a/arch/arm/mach-sa1100/dma.c
+++ b/arch/arm/mach-sa1100/dma.c
@@ -65,7 +65,7 @@
/**
- * sa1100_request_dma - allocate one of the SA11x0's DMA chanels
+ * sa1100_request_dma - allocate one of the SA11x0's DMA channels
* @device: The SA11x0 peripheral targeted by this request
* @device_id: An ascii name for the claiming device
* @callback: Function to be called when the DMA completes
diff --git a/arch/arm/mach-u300/include/mach/u300-regs.h b/arch/arm/mach-u300/include/mach/u300-regs.h
index 88333df..56721a0 100644
--- a/arch/arm/mach-u300/include/mach/u300-regs.h
+++ b/arch/arm/mach-u300/include/mach/u300-regs.h
@@ -6,7 +6,7 @@
* Copyright (C) 2006-2009 ST-Ericsson AB
* License terms: GNU General Public License (GPL) version 2
* Basic register address definitions in physical memory and
- * some block defintions for core devices like the timer.
+ * some block definitions for core devices like the timer.
* Author: Linus Walleij <linus.walleij@stericsson.com>
*/
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
index eaabd4e..e1fc6da 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
@@ -112,7 +112,7 @@
* setups a single pin:
* - reserves the pin so that it is not claimed by another driver
* - setups the iomux according to the configuration
- * - if the pin is configured as a GPIO, we claim it throug kernel gpiolib
+ * - if the pin is configured as a GPIO, we claim it through kernel gpiolib
*/
int mxc_iomux_alloc_pin(const unsigned int pin, const char *label);
/*
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h b/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h
index 9f13061..3887f3f 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h
@@ -48,7 +48,7 @@
* setups a single pin:
* - reserves the pin so that it is not claimed by another driver
* - setups the iomux according to the configuration
- * - if the pin is configured as a GPIO, we claim it throug kernel gpiolib
+ * - if the pin is configured as a GPIO, we claim it through kernel gpiolib
*/
int mxc_iomux_alloc_pin(const unsigned int pin_mode, const char *label);
/*
diff --git a/arch/arm/plat-mxc/pwm.c b/arch/arm/plat-mxc/pwm.c
index 5cdbd60..4ff6dfe 100644
--- a/arch/arm/plat-mxc/pwm.c
+++ b/arch/arm/plat-mxc/pwm.c
@@ -94,7 +94,7 @@
* register to follow the ratio of duty_ns vs. period_ns
* accordingly.
*
- * This is good enought for programming the brightness of
+ * This is good enough for programming the brightness of
* the LCD backlight.
*
* The real implementation would divide PERCLK[0] first by
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index be4ce07..d17375e 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -1252,7 +1252,7 @@
* OMAP_DMA_DYNAMIC_CHAIN
* @params - Channel parameters
*
- * @return - Succes : 0
+ * @return - Success : 0
* Failure: -EINVAL/-ENOMEM
*/
int omap_request_dma_chain(int dev_id, const char *dev_name,
diff --git a/arch/arm/plat-omap/include/plat/omap16xx.h b/arch/arm/plat-omap/include/plat/omap16xx.h
index 0e69b50..7560b4d 100644
--- a/arch/arm/plat-omap/include/plat/omap16xx.h
+++ b/arch/arm/plat-omap/include/plat/omap16xx.h
@@ -124,7 +124,7 @@
#define TIPB_SWITCH_BASE (0xfffbc800)
#define OMAP16XX_MMCSD2_SSW_MPU_CONF (TIPB_SWITCH_BASE + 0x160)
-/* UART3 Registers Maping through MPU bus */
+/* UART3 Registers Mapping through MPU bus */
#define UART3_RHR (OMAP_UART3_BASE + 0)
#define UART3_THR (OMAP_UART3_BASE + 0)
#define UART3_DLL (OMAP_UART3_BASE + 0)
diff --git a/arch/arm/plat-s3c/Kconfig b/arch/arm/plat-s3c/Kconfig
index e139a72..9e9d028 100644
--- a/arch/arm/plat-s3c/Kconfig
+++ b/arch/arm/plat-s3c/Kconfig
@@ -1,5 +1,3 @@
-# arch/arm/plat-s3c/Kconfig
-#
# Copyright 2007 Simtec Electronics
#
# Licensed under GPLv2
diff --git a/arch/arm/plat-s3c/pwm.c b/arch/arm/plat-s3c/pwm.c
index 4fdc5b3..ef019f2 100644
--- a/arch/arm/plat-s3c/pwm.c
+++ b/arch/arm/plat-s3c/pwm.c
@@ -368,7 +368,7 @@
return ret;
}
-static int s3c_pwm_remove(struct platform_device *pdev)
+static int __devexit s3c_pwm_remove(struct platform_device *pdev)
{
struct pwm_device *pwm = platform_get_drvdata(pdev);
diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index 20fbf93..342647e 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -1,5 +1,3 @@
-# arch/arm/plat-s3c24xx/Kconfig
-#
# Copyright 2007 Simtec Electronics
#
# Licensed under GPLv2
diff --git a/arch/arm/plat-s3c24xx/adc.c b/arch/arm/plat-s3c24xx/adc.c
index df47322..ce47627 100644
--- a/arch/arm/plat-s3c24xx/adc.c
+++ b/arch/arm/plat-s3c24xx/adc.c
@@ -365,7 +365,7 @@
return ret;
}
-static int s3c_adc_remove(struct platform_device *pdev)
+static int __devexit s3c_adc_remove(struct platform_device *pdev)
{
struct adc_device *adc = platform_get_drvdata(pdev);
diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c
index f65192d..f0ea794 100644
--- a/arch/arm/plat-s3c24xx/dma.c
+++ b/arch/arm/plat-s3c24xx/dma.c
@@ -1403,11 +1403,13 @@
ord = &dma_order->channels[channel];
for (ch = 0; ch < dma_channels; ch++) {
+ int tmp;
if (!is_channel_valid(ord->list[ch]))
continue;
- if (s3c2410_chans[ord->list[ch]].in_use == 0) {
- ch = ord->list[ch] & ~DMA_CH_VALID;
+ tmp = ord->list[ch] & ~DMA_CH_VALID;
+ if (s3c2410_chans[tmp].in_use == 0) {
+ ch = tmp;
goto found;
}
}
diff --git a/arch/arm/plat-s3c24xx/include/plat/map.h b/arch/arm/plat-s3c24xx/include/plat/map.h
index c4d1334..bd534d3 100644
--- a/arch/arm/plat-s3c24xx/include/plat/map.h
+++ b/arch/arm/plat-s3c24xx/include/plat/map.h
@@ -64,7 +64,7 @@
/* the calculation for the VA of this must ensure that
* it is the same distance apart from the UART in the
* phsyical address space, as the initial mapping for the IO
- * is done as a 1:1 maping. This puts it (currently) at
+ * is done as a 1:1 mapping. This puts it (currently) at
* 0xFA800000, which is not in the way of any current mapping
* by the base system.
*/
diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c
index ef0f521..ad0d44e 100644
--- a/arch/arm/plat-s3c24xx/irq.c
+++ b/arch/arm/plat-s3c24xx/irq.c
@@ -522,6 +522,8 @@
__raw_writel(intmod, S3C2410_INTMOD);
return 0;
}
+
+EXPORT_SYMBOL_GPL(s3c24xx_set_fiq);
#endif
diff --git a/arch/arm/plat-s3c64xx/Kconfig b/arch/arm/plat-s3c64xx/Kconfig
index bcfa778..e6da87a 100644
--- a/arch/arm/plat-s3c64xx/Kconfig
+++ b/arch/arm/plat-s3c64xx/Kconfig
@@ -1,5 +1,3 @@
-# arch/arm/plat-s3c64xx/Kconfig
-#
# Copyright 2008 Openmoko, Inc.
# Copyright 2008 Simtec Electronics
# Ben Dooks <ben@simtec.co.uk>
diff --git a/arch/arm/plat-s5pc1xx/Kconfig b/arch/arm/plat-s5pc1xx/Kconfig
index 1608e62..b7b9e91 100644
--- a/arch/arm/plat-s5pc1xx/Kconfig
+++ b/arch/arm/plat-s5pc1xx/Kconfig
@@ -1,5 +1,3 @@
-# arch/arm/plat-s5pc1xx/Kconfig
-#
# Copyright 2009 Samsung Electronics Co.
# Byungho Min <bhmin@samsung.com>
#
diff --git a/arch/avr32/boards/hammerhead/Kconfig b/arch/avr32/boards/hammerhead/Kconfig
index fda2331..5c13d78 100644
--- a/arch/avr32/boards/hammerhead/Kconfig
+++ b/arch/avr32/boards/hammerhead/Kconfig
@@ -24,7 +24,7 @@
bool "Atmel AC97 Sound support"
help
This enables Sound support for the Hammerhead board. You may
- also go trough the ALSA settings to get it working.
+ also go through the ALSA settings to get it working.
Choose 'Y' here if you have ordered a Corona daugther board and
want to make your board funky.
diff --git a/arch/blackfin/kernel/process.c b/arch/blackfin/kernel/process.c
index 5cc7e2e..4587642 100644
--- a/arch/blackfin/kernel/process.c
+++ b/arch/blackfin/kernel/process.c
@@ -215,22 +215,18 @@
/*
* sys_execve() executes a new program.
*/
-
asmlinkage int sys_execve(char __user *name, char __user * __user *argv, char __user * __user *envp)
{
int error;
char *filename;
struct pt_regs *regs = (struct pt_regs *)((&name) + 6);
- lock_kernel();
filename = getname(name);
error = PTR_ERR(filename);
if (IS_ERR(filename))
- goto out;
+ return error;
error = do_execve(filename, argv, envp, regs);
putname(filename);
- out:
- unlock_kernel();
return error;
}
diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c
index 6b7325d..78cb3d3 100644
--- a/arch/blackfin/kernel/traps.c
+++ b/arch/blackfin/kernel/traps.c
@@ -619,7 +619,7 @@
/*
* Similar to get_user, do some address checking, then dereference
- * Return true on sucess, false on bad address
+ * Return true on success, false on bad address
*/
static bool get_instruction(unsigned short *val, unsigned short *address)
{
diff --git a/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h b/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h
index e06f411..f9fd2b2 100644
--- a/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h
+++ b/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h
@@ -542,7 +542,7 @@
#define HMDMA0_CONTROL 0xFFC03300 /* Handshake MDMA0 Control Register */
#define HMDMA0_ECINIT 0xFFC03304 /* HMDMA0 Initial Edge Count Register */
#define HMDMA0_BCINIT 0xFFC03308 /* HMDMA0 Initial Block Count Register */
-#define HMDMA0_ECURGENT 0xFFC0330C /* HMDMA0 Urgent Edge Count Threshhold Register */
+#define HMDMA0_ECURGENT 0xFFC0330C /* HMDMA0 Urgent Edge Count Threshold Register */
#define HMDMA0_ECOVERFLOW 0xFFC03310 /* HMDMA0 Edge Count Overflow Interrupt Register */
#define HMDMA0_ECOUNT 0xFFC03314 /* HMDMA0 Current Edge Count Register */
#define HMDMA0_BCOUNT 0xFFC03318 /* HMDMA0 Current Block Count Register */
@@ -550,7 +550,7 @@
#define HMDMA1_CONTROL 0xFFC03340 /* Handshake MDMA1 Control Register */
#define HMDMA1_ECINIT 0xFFC03344 /* HMDMA1 Initial Edge Count Register */
#define HMDMA1_BCINIT 0xFFC03348 /* HMDMA1 Initial Block Count Register */
-#define HMDMA1_ECURGENT 0xFFC0334C /* HMDMA1 Urgent Edge Count Threshhold Register */
+#define HMDMA1_ECURGENT 0xFFC0334C /* HMDMA1 Urgent Edge Count Threshold Register */
#define HMDMA1_ECOVERFLOW 0xFFC03350 /* HMDMA1 Edge Count Overflow Interrupt Register */
#define HMDMA1_ECOUNT 0xFFC03354 /* HMDMA1 Current Edge Count Register */
#define HMDMA1_BCOUNT 0xFFC03358 /* HMDMA1 Current Block Count Register */
diff --git a/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h b/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h
index f821700..b9dbb73 100644
--- a/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h
+++ b/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h
@@ -544,7 +544,7 @@
#define HMDMA0_CONTROL 0xFFC03300 /* Handshake MDMA0 Control Register */
#define HMDMA0_ECINIT 0xFFC03304 /* HMDMA0 Initial Edge Count Register */
#define HMDMA0_BCINIT 0xFFC03308 /* HMDMA0 Initial Block Count Register */
-#define HMDMA0_ECURGENT 0xFFC0330C /* HMDMA0 Urgent Edge Count Threshhold Register */
+#define HMDMA0_ECURGENT 0xFFC0330C /* HMDMA0 Urgent Edge Count Threshold Register */
#define HMDMA0_ECOVERFLOW 0xFFC03310 /* HMDMA0 Edge Count Overflow Interrupt Register */
#define HMDMA0_ECOUNT 0xFFC03314 /* HMDMA0 Current Edge Count Register */
#define HMDMA0_BCOUNT 0xFFC03318 /* HMDMA0 Current Block Count Register */
@@ -552,7 +552,7 @@
#define HMDMA1_CONTROL 0xFFC03340 /* Handshake MDMA1 Control Register */
#define HMDMA1_ECINIT 0xFFC03344 /* HMDMA1 Initial Edge Count Register */
#define HMDMA1_BCINIT 0xFFC03348 /* HMDMA1 Initial Block Count Register */
-#define HMDMA1_ECURGENT 0xFFC0334C /* HMDMA1 Urgent Edge Count Threshhold Register */
+#define HMDMA1_ECURGENT 0xFFC0334C /* HMDMA1 Urgent Edge Count Threshold Register */
#define HMDMA1_ECOVERFLOW 0xFFC03350 /* HMDMA1 Edge Count Overflow Interrupt Register */
#define HMDMA1_ECOUNT 0xFFC03354 /* HMDMA1 Current Edge Count Register */
#define HMDMA1_BCOUNT 0xFFC03358 /* HMDMA1 Current Block Count Register */
diff --git a/arch/blackfin/mach-bf537/include/mach/defBF534.h b/arch/blackfin/mach-bf537/include/mach/defBF534.h
index cebb14f..a6d20ca 100644
--- a/arch/blackfin/mach-bf537/include/mach/defBF534.h
+++ b/arch/blackfin/mach-bf537/include/mach/defBF534.h
@@ -934,7 +934,7 @@
#define HMDMA0_CONTROL 0xFFC03300 /* Handshake MDMA0 Control Register */
#define HMDMA0_ECINIT 0xFFC03304 /* HMDMA0 Initial Edge Count Register */
#define HMDMA0_BCINIT 0xFFC03308 /* HMDMA0 Initial Block Count Register */
-#define HMDMA0_ECURGENT 0xFFC0330C /* HMDMA0 Urgent Edge Count Threshhold Register */
+#define HMDMA0_ECURGENT 0xFFC0330C /* HMDMA0 Urgent Edge Count Threshold Register */
#define HMDMA0_ECOVERFLOW 0xFFC03310 /* HMDMA0 Edge Count Overflow Interrupt Register */
#define HMDMA0_ECOUNT 0xFFC03314 /* HMDMA0 Current Edge Count Register */
#define HMDMA0_BCOUNT 0xFFC03318 /* HMDMA0 Current Block Count Register */
@@ -942,7 +942,7 @@
#define HMDMA1_CONTROL 0xFFC03340 /* Handshake MDMA1 Control Register */
#define HMDMA1_ECINIT 0xFFC03344 /* HMDMA1 Initial Edge Count Register */
#define HMDMA1_BCINIT 0xFFC03348 /* HMDMA1 Initial Block Count Register */
-#define HMDMA1_ECURGENT 0xFFC0334C /* HMDMA1 Urgent Edge Count Threshhold Register */
+#define HMDMA1_ECURGENT 0xFFC0334C /* HMDMA1 Urgent Edge Count Threshold Register */
#define HMDMA1_ECOVERFLOW 0xFFC03350 /* HMDMA1 Edge Count Overflow Interrupt Register */
#define HMDMA1_ECOUNT 0xFFC03354 /* HMDMA1 Current Edge Count Register */
#define HMDMA1_BCOUNT 0xFFC03358 /* HMDMA1 Current Block Count Register */
diff --git a/arch/blackfin/mach-bf548/include/mach/defBF544.h b/arch/blackfin/mach-bf548/include/mach/defBF544.h
index dd414ae..39f588d 100644
--- a/arch/blackfin/mach-bf548/include/mach/defBF544.h
+++ b/arch/blackfin/mach-bf548/include/mach/defBF544.h
@@ -491,7 +491,7 @@
#define HMDMA0_CONTROL 0xffc04500 /* Handshake MDMA0 Control Register */
#define HMDMA0_ECINIT 0xffc04504 /* Handshake MDMA0 Initial Edge Count Register */
#define HMDMA0_BCINIT 0xffc04508 /* Handshake MDMA0 Initial Block Count Register */
-#define HMDMA0_ECURGENT 0xffc0450c /* Handshake MDMA0 Urgent Edge Count Threshhold Register */
+#define HMDMA0_ECURGENT 0xffc0450c /* Handshake MDMA0 Urgent Edge Count Threshold Register */
#define HMDMA0_ECOVERFLOW 0xffc04510 /* Handshake MDMA0 Edge Count Overflow Interrupt Register */
#define HMDMA0_ECOUNT 0xffc04514 /* Handshake MDMA0 Current Edge Count Register */
#define HMDMA0_BCOUNT 0xffc04518 /* Handshake MDMA0 Current Block Count Register */
@@ -501,7 +501,7 @@
#define HMDMA1_CONTROL 0xffc04540 /* Handshake MDMA1 Control Register */
#define HMDMA1_ECINIT 0xffc04544 /* Handshake MDMA1 Initial Edge Count Register */
#define HMDMA1_BCINIT 0xffc04548 /* Handshake MDMA1 Initial Block Count Register */
-#define HMDMA1_ECURGENT 0xffc0454c /* Handshake MDMA1 Urgent Edge Count Threshhold Register */
+#define HMDMA1_ECURGENT 0xffc0454c /* Handshake MDMA1 Urgent Edge Count Threshold Register */
#define HMDMA1_ECOVERFLOW 0xffc04550 /* Handshake MDMA1 Edge Count Overflow Interrupt Register */
#define HMDMA1_ECOUNT 0xffc04554 /* Handshake MDMA1 Current Edge Count Register */
#define HMDMA1_BCOUNT 0xffc04558 /* Handshake MDMA1 Current Block Count Register */
diff --git a/arch/blackfin/mach-bf548/include/mach/defBF547.h b/arch/blackfin/mach-bf548/include/mach/defBF547.h
index 5a9dbab..c4dcf30 100644
--- a/arch/blackfin/mach-bf548/include/mach/defBF547.h
+++ b/arch/blackfin/mach-bf548/include/mach/defBF547.h
@@ -470,7 +470,7 @@
#define HMDMA0_CONTROL 0xffc04500 /* Handshake MDMA0 Control Register */
#define HMDMA0_ECINIT 0xffc04504 /* Handshake MDMA0 Initial Edge Count Register */
#define HMDMA0_BCINIT 0xffc04508 /* Handshake MDMA0 Initial Block Count Register */
-#define HMDMA0_ECURGENT 0xffc0450c /* Handshake MDMA0 Urgent Edge Count Threshhold Register */
+#define HMDMA0_ECURGENT 0xffc0450c /* Handshake MDMA0 Urgent Edge Count Threshold Register */
#define HMDMA0_ECOVERFLOW 0xffc04510 /* Handshake MDMA0 Edge Count Overflow Interrupt Register */
#define HMDMA0_ECOUNT 0xffc04514 /* Handshake MDMA0 Current Edge Count Register */
#define HMDMA0_BCOUNT 0xffc04518 /* Handshake MDMA0 Current Block Count Register */
@@ -480,7 +480,7 @@
#define HMDMA1_CONTROL 0xffc04540 /* Handshake MDMA1 Control Register */
#define HMDMA1_ECINIT 0xffc04544 /* Handshake MDMA1 Initial Edge Count Register */
#define HMDMA1_BCINIT 0xffc04548 /* Handshake MDMA1 Initial Block Count Register */
-#define HMDMA1_ECURGENT 0xffc0454c /* Handshake MDMA1 Urgent Edge Count Threshhold Register */
+#define HMDMA1_ECURGENT 0xffc0454c /* Handshake MDMA1 Urgent Edge Count Threshold Register */
#define HMDMA1_ECOVERFLOW 0xffc04550 /* Handshake MDMA1 Edge Count Overflow Interrupt Register */
#define HMDMA1_ECOUNT 0xffc04554 /* Handshake MDMA1 Current Edge Count Register */
#define HMDMA1_BCOUNT 0xffc04558 /* Handshake MDMA1 Current Block Count Register */
diff --git a/arch/blackfin/mach-bf548/include/mach/defBF548.h b/arch/blackfin/mach-bf548/include/mach/defBF548.h
index 82cd593..a507998 100644
--- a/arch/blackfin/mach-bf548/include/mach/defBF548.h
+++ b/arch/blackfin/mach-bf548/include/mach/defBF548.h
@@ -853,7 +853,7 @@
#define HMDMA0_CONTROL 0xffc04500 /* Handshake MDMA0 Control Register */
#define HMDMA0_ECINIT 0xffc04504 /* Handshake MDMA0 Initial Edge Count Register */
#define HMDMA0_BCINIT 0xffc04508 /* Handshake MDMA0 Initial Block Count Register */
-#define HMDMA0_ECURGENT 0xffc0450c /* Handshake MDMA0 Urgent Edge Count Threshhold Register */
+#define HMDMA0_ECURGENT 0xffc0450c /* Handshake MDMA0 Urgent Edge Count Threshold Register */
#define HMDMA0_ECOVERFLOW 0xffc04510 /* Handshake MDMA0 Edge Count Overflow Interrupt Register */
#define HMDMA0_ECOUNT 0xffc04514 /* Handshake MDMA0 Current Edge Count Register */
#define HMDMA0_BCOUNT 0xffc04518 /* Handshake MDMA0 Current Block Count Register */
@@ -863,7 +863,7 @@
#define HMDMA1_CONTROL 0xffc04540 /* Handshake MDMA1 Control Register */
#define HMDMA1_ECINIT 0xffc04544 /* Handshake MDMA1 Initial Edge Count Register */
#define HMDMA1_BCINIT 0xffc04548 /* Handshake MDMA1 Initial Block Count Register */
-#define HMDMA1_ECURGENT 0xffc0454c /* Handshake MDMA1 Urgent Edge Count Threshhold Register */
+#define HMDMA1_ECURGENT 0xffc0454c /* Handshake MDMA1 Urgent Edge Count Threshold Register */
#define HMDMA1_ECOVERFLOW 0xffc04550 /* Handshake MDMA1 Edge Count Overflow Interrupt Register */
#define HMDMA1_ECOUNT 0xffc04554 /* Handshake MDMA1 Current Edge Count Register */
#define HMDMA1_BCOUNT 0xffc04558 /* Handshake MDMA1 Current Block Count Register */
diff --git a/arch/blackfin/mach-bf548/include/mach/defBF549.h b/arch/blackfin/mach-bf548/include/mach/defBF549.h
index 6fc6e39..f7f0435 100644
--- a/arch/blackfin/mach-bf548/include/mach/defBF549.h
+++ b/arch/blackfin/mach-bf548/include/mach/defBF549.h
@@ -1024,7 +1024,7 @@
#define HMDMA0_CONTROL 0xffc04500 /* Handshake MDMA0 Control Register */
#define HMDMA0_ECINIT 0xffc04504 /* Handshake MDMA0 Initial Edge Count Register */
#define HMDMA0_BCINIT 0xffc04508 /* Handshake MDMA0 Initial Block Count Register */
-#define HMDMA0_ECURGENT 0xffc0450c /* Handshake MDMA0 Urgent Edge Count Threshhold Register */
+#define HMDMA0_ECURGENT 0xffc0450c /* Handshake MDMA0 Urgent Edge Count Threshold Register */
#define HMDMA0_ECOVERFLOW 0xffc04510 /* Handshake MDMA0 Edge Count Overflow Interrupt Register */
#define HMDMA0_ECOUNT 0xffc04514 /* Handshake MDMA0 Current Edge Count Register */
#define HMDMA0_BCOUNT 0xffc04518 /* Handshake MDMA0 Current Block Count Register */
@@ -1034,7 +1034,7 @@
#define HMDMA1_CONTROL 0xffc04540 /* Handshake MDMA1 Control Register */
#define HMDMA1_ECINIT 0xffc04544 /* Handshake MDMA1 Initial Edge Count Register */
#define HMDMA1_BCINIT 0xffc04548 /* Handshake MDMA1 Initial Block Count Register */
-#define HMDMA1_ECURGENT 0xffc0454c /* Handshake MDMA1 Urgent Edge Count Threshhold Register */
+#define HMDMA1_ECURGENT 0xffc0454c /* Handshake MDMA1 Urgent Edge Count Threshold Register */
#define HMDMA1_ECOVERFLOW 0xffc04550 /* Handshake MDMA1 Edge Count Overflow Interrupt Register */
#define HMDMA1_ECOUNT 0xffc04554 /* Handshake MDMA1 Current Edge Count Register */
#define HMDMA1_BCOUNT 0xffc04558 /* Handshake MDMA1 Current Block Count Register */
diff --git a/arch/cris/arch-v10/mm/fault.c b/arch/cris/arch-v10/mm/fault.c
index 087a209..ed60588 100644
--- a/arch/cris/arch-v10/mm/fault.c
+++ b/arch/cris/arch-v10/mm/fault.c
@@ -80,8 +80,7 @@
* do_page_fault may have flushed the TLB so we have to restore
* the MMU registers.
*/
- local_save_flags(flags);
- local_irq_disable();
+ local_irq_save(flags);
pmd = (pmd_t *)(pgd + pgd_index(address));
if (pmd_none(*pmd))
goto exit;
diff --git a/arch/cris/arch-v10/mm/tlb.c b/arch/cris/arch-v10/mm/tlb.c
index 4a496e4..21d78c5 100644
--- a/arch/cris/arch-v10/mm/tlb.c
+++ b/arch/cris/arch-v10/mm/tlb.c
@@ -134,28 +134,6 @@
local_irq_restore(flags);
}
-/* dump the entire TLB for debug purposes */
-
-#if 0
-void
-dump_tlb_all(void)
-{
- int i;
- unsigned long flags;
-
- printk("TLB dump. LO is: pfn | reserved | global | valid | kernel | we |\n");
-
- local_save_flags(flags);
- local_irq_disable();
- for(i = 0; i < NUM_TLB_ENTRIES; i++) {
- *R_TLB_SELECT = ( IO_FIELD(R_TLB_SELECT, index, i) );
- printk("Entry %d: HI 0x%08lx, LO 0x%08lx\n",
- i, *R_TLB_HI, *R_TLB_LO);
- }
- local_irq_restore(flags);
-}
-#endif
-
/*
* Initialize the context related info for a new mm_struct
* instance.
diff --git a/arch/cris/mm/fault.c b/arch/cris/mm/fault.c
index 4a7cdd9..380df1a 100644
--- a/arch/cris/mm/fault.c
+++ b/arch/cris/mm/fault.c
@@ -209,7 +209,7 @@
/* Are we prepared to handle this kernel fault?
*
* (The kernel has valid exception-points in the source
- * when it acesses user-memory. When it fails in one
+ * when it accesses user-memory. When it fails in one
* of those points, we find it in a table and do a jump
* to some fixup code that loads an appropriate error
* code)
diff --git a/arch/frv/kernel/process.c b/arch/frv/kernel/process.c
index 9042559..21d0fd1 100644
--- a/arch/frv/kernel/process.c
+++ b/arch/frv/kernel/process.c
@@ -255,15 +255,12 @@
int error;
char * filename;
- lock_kernel();
filename = getname(name);
error = PTR_ERR(filename);
if (IS_ERR(filename))
- goto out;
+ return error;
error = do_execve(filename, argv, envp, __frame);
putname(filename);
- out:
- unlock_kernel();
return error;
}
diff --git a/arch/h8300/kernel/process.c b/arch/h8300/kernel/process.c
index e2f33d0..bd883fa 100644
--- a/arch/h8300/kernel/process.c
+++ b/arch/h8300/kernel/process.c
@@ -218,15 +218,12 @@
char * filename;
struct pt_regs *regs = (struct pt_regs *) ((unsigned char *)&dummy-4);
- lock_kernel();
filename = getname(name);
error = PTR_ERR(filename);
if (IS_ERR(filename))
- goto out;
+ return error;
error = do_execve(filename, argv, envp, regs);
putname(filename);
-out:
- unlock_kernel();
return error;
}
diff --git a/arch/ia64/hp/common/sba_iommu.c b/arch/ia64/hp/common/sba_iommu.c
index 674a837..f332e3f 100644
--- a/arch/ia64/hp/common/sba_iommu.c
+++ b/arch/ia64/hp/common/sba_iommu.c
@@ -1381,7 +1381,7 @@
#endif
/*
- ** Not virtually contigous.
+ ** Not virtually contiguous.
** Terminate prev chunk.
** Start a new chunk.
**
diff --git a/arch/ia64/ia32/ia32_entry.S b/arch/ia64/ia32/ia32_entry.S
index 10c3751..2fd7479 100644
--- a/arch/ia64/ia32/ia32_entry.S
+++ b/arch/ia64/ia32/ia32_entry.S
@@ -79,7 +79,7 @@
(p6) br.cond.spnt .ia32_strace_check_retval
;; // prevent RAW on r8
END(ia32_ret_from_clone)
- // fall thrugh
+ // fall through
GLOBAL_ENTRY(ia32_ret_from_syscall)
PT_REGS_UNWIND_INFO(0)
diff --git a/arch/ia64/include/asm/perfmon_default_smpl.h b/arch/ia64/include/asm/perfmon_default_smpl.h
index 48822c0..74724b2 100644
--- a/arch/ia64/include/asm/perfmon_default_smpl.h
+++ b/arch/ia64/include/asm/perfmon_default_smpl.h
@@ -67,7 +67,7 @@
unsigned long ip; /* where did the overflow interrupt happened */
unsigned long tstamp; /* ar.itc when entering perfmon intr. handler */
- unsigned short cpu; /* cpu on which the overfow occured */
+ unsigned short cpu; /* cpu on which the overflow occured */
unsigned short set; /* event set active when overflow ocurred */
int tgid; /* thread group id (for NPTL, this is getpid()) */
} pfm_default_smpl_entry_t;
diff --git a/arch/ia64/include/asm/sn/shubio.h b/arch/ia64/include/asm/sn/shubio.h
index 22a6f18..6052422 100644
--- a/arch/ia64/include/asm/sn/shubio.h
+++ b/arch/ia64/include/asm/sn/shubio.h
@@ -3289,7 +3289,7 @@
#define IIO_IIDSR_LVL_SHIFT 0
#define IIO_IIDSR_LVL_MASK 0x000000ff
-/* Xtalk timeout threshhold register (IIO_IXTT) */
+/* Xtalk timeout threshold register (IIO_IXTT) */
#define IXTT_RRSP_TO_SHFT 55 /* read response timeout */
#define IXTT_RRSP_TO_MASK (0x1FULL << IXTT_RRSP_TO_SHFT)
#define IXTT_RRSP_PS_SHFT 32 /* read responsed TO prescalar */
diff --git a/arch/ia64/include/asm/unistd.h b/arch/ia64/include/asm/unistd.h
index 9c72e36..10a8f21 100644
--- a/arch/ia64/include/asm/unistd.h
+++ b/arch/ia64/include/asm/unistd.h
@@ -311,7 +311,7 @@
#define __NR_preadv 1319
#define __NR_pwritev 1320
#define __NR_rt_tgsigqueueinfo 1321
-#define __NR_rt_recvmmsg 1322
+#define __NR_recvmmsg 1322
#ifdef __KERNEL__
diff --git a/arch/ia64/kernel/esi.c b/arch/ia64/kernel/esi.c
index d5764a3..b091111 100644
--- a/arch/ia64/kernel/esi.c
+++ b/arch/ia64/kernel/esi.c
@@ -84,7 +84,7 @@
case ESI_DESC_ENTRY_POINT:
break;
default:
- printk(KERN_WARNING "Unkown table type %d found in "
+ printk(KERN_WARNING "Unknown table type %d found in "
"ESI table, ignoring rest of table\n", *p);
return -ENODEV;
}
diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c
index 402698b..599b233 100644
--- a/arch/ia64/kernel/perfmon.c
+++ b/arch/ia64/kernel/perfmon.c
@@ -3517,7 +3517,7 @@
* IA64_THREAD_DBG_VALID set. This indicates a task which was
* able to use the debug registers for debugging purposes via
* ptrace(). Therefore we know it was not using them for
- * perfmormance monitoring, so we only decrement the number
+ * performance monitoring, so we only decrement the number
* of "ptraced" debug register users to keep the count up to date
*/
int
diff --git a/arch/ia64/sn/kernel/io_acpi_init.c b/arch/ia64/sn/kernel/io_acpi_init.c
index fd50ff9..66f633b 100644
--- a/arch/ia64/sn/kernel/io_acpi_init.c
+++ b/arch/ia64/sn/kernel/io_acpi_init.c
@@ -390,7 +390,7 @@
pcidev_match.handle = NULL;
acpi_walk_namespace(ACPI_TYPE_DEVICE, rootbus_handle, ACPI_UINT32_MAX,
- find_matching_device, &pcidev_match, NULL);
+ find_matching_device, NULL, &pcidev_match, NULL);
if (!pcidev_match.handle) {
printk(KERN_ERR
diff --git a/arch/m68k/ifpsp060/src/fpsp.S b/arch/m68k/ifpsp060/src/fpsp.S
index 6c1a9a2..73613b5 100644
--- a/arch/m68k/ifpsp060/src/fpsp.S
+++ b/arch/m68k/ifpsp060/src/fpsp.S
@@ -753,7 +753,7 @@
bra.l _real_ovfl
-# overflow occurred but is disabled. meanwhile, inexact is enabled. therefore,
+# overflow occurred but is disabled. meanwhile, inexact is enabled. Therefore,
# we must jump to real_inex().
fovfl_inex_on:
@@ -1015,7 +1015,7 @@
bra.l _real_unfl
-# undeflow occurred but is disabled. meanwhile, inexact is enabled. therefore,
+# underflow occurred but is disabled. meanwhile, inexact is enabled. Therefore,
# we must jump to real_inex().
funfl_inex_on:
@@ -2963,7 +2963,7 @@
tst.w %d0 # is instr fmovm?
bmi.b iea_dis_fmovm # yes
-# instruction is using an extended precision immediate operand. therefore,
+# instruction is using an extended precision immediate operand. Therefore,
# the total instruction length is 16 bytes.
iea_dis_immed:
mov.l &0x10,%d0 # 16 bytes of instruction
@@ -9624,7 +9624,7 @@
bge.b sok_norm2 # thank goodness no
# the multiply factor that we're trying to create should be a denorm
-# for the multiply to work. therefore, we're going to actually do a
+# for the multiply to work. Therefore, we're going to actually do a
# multiply with a denorm which will cause an unimplemented data type
# exception to be put into the machine which will be caught and corrected
# later. we don't do this with the DENORMs above because this method
@@ -12216,7 +12216,7 @@
#
# operand will underflow AND underflow or inexact is enabled.
-# therefore, we must return the result rounded to extended precision.
+# Therefore, we must return the result rounded to extended precision.
#
fin_sd_unfl_ena:
mov.l FP_SCR0_HI(%a6),FP_SCR1_HI(%a6)
@@ -12746,7 +12746,7 @@
#
# The destination was In Range and the source was a ZERO. The result,
-# therefore, is an INF w/ the proper sign.
+# Therefore, is an INF w/ the proper sign.
# So, determine the sign and return a new INF (w/ the j-bit cleared).
#
global fdiv_inf_load # global for fsgldiv
@@ -12996,7 +12996,7 @@
#
# operand will underflow AND underflow is enabled.
-# therefore, we must return the result rounded to extended precision.
+# Therefore, we must return the result rounded to extended precision.
#
fneg_sd_unfl_ena:
mov.l FP_SCR0_HI(%a6),FP_SCR1_HI(%a6)
@@ -13611,7 +13611,7 @@
#
# operand will underflow AND underflow is enabled.
-# therefore, we must return the result rounded to extended precision.
+# Therefore, we must return the result rounded to extended precision.
#
fabs_sd_unfl_ena:
mov.l FP_SCR0_HI(%a6),FP_SCR1_HI(%a6)
@@ -14973,7 +14973,7 @@
#
# the ZEROes have opposite signs:
-# - therefore, we return +ZERO if the rounding modes are RN,RZ, or RP.
+# - Therefore, we return +ZERO if the rounding modes are RN,RZ, or RP.
# - -ZERO is returned in the case of RM.
#
fadd_zero_2_chk_rm:
@@ -15425,7 +15425,7 @@
#
# the ZEROes have the same signs:
-# - therefore, we return +ZERO if the rounding mode is RN,RZ, or RP
+# - Therefore, we return +ZERO if the rounding mode is RN,RZ, or RP
# - -ZERO is returned in the case of RM.
#
fsub_zero_2_chk_rm:
@@ -15693,7 +15693,7 @@
#
# operand will underflow AND underflow is enabled.
-# therefore, we must return the result rounded to extended precision.
+# Therefore, we must return the result rounded to extended precision.
#
fsqrt_sd_unfl_ena:
mov.l FP_SCR0_HI(%a6),FP_SCR1_HI(%a6)
@@ -21000,7 +21000,7 @@
tst.l %d0
bne.b fout_pack_set
# "mantissa" is all zero which means that the answer is zero. but, the '040
-# algorithm allows the exponent to be non-zero. the 881/2 do not. therefore,
+# algorithm allows the exponent to be non-zero. the 881/2 do not. Therefore,
# if the mantissa is zero, I will zero the exponent, too.
# the question now is whether the exponents sign bit is allowed to be non-zero
# for a zero, also...
@@ -21743,7 +21743,7 @@
rts
# #
-# dnrm_lp(): normalize exponent/mantissa to specified threshhold #
+# dnrm_lp(): normalize exponent/mantissa to specified threshold #
# #
# INPUT: #
# %a0 : points to the operand to be denormalized #
@@ -22402,7 +22402,7 @@
bgt.b unnorm_nrm_zero # yes; denorm only until exp = 0
#
-# exponent would not go < 0. therefore, number stays normalized
+# exponent would not go < 0. Therefore, number stays normalized
#
sub.w %d0, %d1 # shift exponent value
mov.w FTEMP_EX(%a0), %d0 # load old exponent
diff --git a/arch/m68k/ifpsp060/src/pfpsp.S b/arch/m68k/ifpsp060/src/pfpsp.S
index 51b9f7d..e71ba0a 100644
--- a/arch/m68k/ifpsp060/src/pfpsp.S
+++ b/arch/m68k/ifpsp060/src/pfpsp.S
@@ -752,7 +752,7 @@
bra.l _real_ovfl
-# overflow occurred but is disabled. meanwhile, inexact is enabled. therefore,
+# overflow occurred but is disabled. meanwhile, inexact is enabled. Therefore,
# we must jump to real_inex().
fovfl_inex_on:
@@ -1014,7 +1014,7 @@
bra.l _real_unfl
-# undeflow occurred but is disabled. meanwhile, inexact is enabled. therefore,
+# underflow occurred but is disabled. meanwhile, inexact is enabled. Therefore,
# we must jump to real_inex().
funfl_inex_on:
@@ -2962,7 +2962,7 @@
tst.w %d0 # is instr fmovm?
bmi.b iea_dis_fmovm # yes
-# instruction is using an extended precision immediate operand. therefore,
+# instruction is using an extended precision immediate operand. Therefore,
# the total instruction length is 16 bytes.
iea_dis_immed:
mov.l &0x10,%d0 # 16 bytes of instruction
@@ -5865,7 +5865,7 @@
rts
# #
-# dnrm_lp(): normalize exponent/mantissa to specified threshhold #
+# dnrm_lp(): normalize exponent/mantissa to specified threshold #
# #
# INPUT: #
# %a0 : points to the operand to be denormalized #
@@ -6524,7 +6524,7 @@
bgt.b unnorm_nrm_zero # yes; denorm only until exp = 0
#
-# exponent would not go < 0. therefore, number stays normalized
+# exponent would not go < 0. Therefore, number stays normalized
#
sub.w %d0, %d1 # shift exponent value
mov.w FTEMP_EX(%a0), %d0 # load old exponent
@@ -7901,7 +7901,7 @@
tst.l %d0
bne.b fout_pack_set
# "mantissa" is all zero which means that the answer is zero. but, the '040
-# algorithm allows the exponent to be non-zero. the 881/2 do not. therefore,
+# algorithm allows the exponent to be non-zero. the 881/2 do not. Therefore,
# if the mantissa is zero, I will zero the exponent, too.
# the question now is whether the exponents sign bit is allowed to be non-zero
# for a zero, also...
@@ -8647,7 +8647,7 @@
#
# operand will underflow AND underflow or inexact is enabled.
-# therefore, we must return the result rounded to extended precision.
+# Therefore, we must return the result rounded to extended precision.
#
fin_sd_unfl_ena:
mov.l FP_SCR0_HI(%a6),FP_SCR1_HI(%a6)
@@ -9177,7 +9177,7 @@
#
# The destination was In Range and the source was a ZERO. The result,
-# therefore, is an INF w/ the proper sign.
+# Therefore, is an INF w/ the proper sign.
# So, determine the sign and return a new INF (w/ the j-bit cleared).
#
global fdiv_inf_load # global for fsgldiv
@@ -9427,7 +9427,7 @@
#
# operand will underflow AND underflow is enabled.
-# therefore, we must return the result rounded to extended precision.
+# Therefore, we must return the result rounded to extended precision.
#
fneg_sd_unfl_ena:
mov.l FP_SCR0_HI(%a6),FP_SCR1_HI(%a6)
@@ -10042,7 +10042,7 @@
#
# operand will underflow AND underflow is enabled.
-# therefore, we must return the result rounded to extended precision.
+# Therefore, we must return the result rounded to extended precision.
#
fabs_sd_unfl_ena:
mov.l FP_SCR0_HI(%a6),FP_SCR1_HI(%a6)
@@ -11404,7 +11404,7 @@
#
# the ZEROes have opposite signs:
-# - therefore, we return +ZERO if the rounding modes are RN,RZ, or RP.
+# - Therefore, we return +ZERO if the rounding modes are RN,RZ, or RP.
# - -ZERO is returned in the case of RM.
#
fadd_zero_2_chk_rm:
@@ -11856,7 +11856,7 @@
#
# the ZEROes have the same signs:
-# - therefore, we return +ZERO if the rounding mode is RN,RZ, or RP
+# - Therefore, we return +ZERO if the rounding mode is RN,RZ, or RP
# - -ZERO is returned in the case of RM.
#
fsub_zero_2_chk_rm:
@@ -12124,7 +12124,7 @@
#
# operand will underflow AND underflow is enabled.
-# therefore, we must return the result rounded to extended precision.
+# Therefore, we must return the result rounded to extended precision.
#
fsqrt_sd_unfl_ena:
mov.l FP_SCR0_HI(%a6),FP_SCR1_HI(%a6)
diff --git a/arch/m68k/include/asm/bootinfo.h b/arch/m68k/include/asm/bootinfo.h
index fb8a06b..67e7a78 100644
--- a/arch/m68k/include/asm/bootinfo.h
+++ b/arch/m68k/include/asm/bootinfo.h
@@ -145,7 +145,7 @@
/*
* Macintosh hardware profile data - unused, see macintosh.h for
- * resonable type values
+ * reasonable type values
*/
#define BI_MAC_VIA1BASE 0x8010 /* Mac VIA1 base address (always present) */
diff --git a/arch/m68k/include/asm/processor.h b/arch/m68k/include/asm/processor.h
index 74fd674..cbd3d47 100644
--- a/arch/m68k/include/asm/processor.h
+++ b/arch/m68k/include/asm/processor.h
@@ -165,6 +165,8 @@
eip; })
#define KSTK_ESP(tsk) ((tsk) == current ? rdusp() : (tsk)->thread.usp)
+#define task_pt_regs(tsk) ((struct pt_regs *) ((tsk)->thread.esp0))
+
#define cpu_relax() barrier()
#endif
diff --git a/arch/m68k/include/asm/ptrace.h b/arch/m68k/include/asm/ptrace.h
index a6ab663..ee4011c 100644
--- a/arch/m68k/include/asm/ptrace.h
+++ b/arch/m68k/include/asm/ptrace.h
@@ -86,7 +86,7 @@
extern void show_regs(struct pt_regs *);
/*
- * These are defined as per linux/ptrace.h, which see.
+ * These are defined as per linux/ptrace.h.
*/
struct task_struct;
diff --git a/arch/m68k/include/asm/thread_info_no.h b/arch/m68k/include/asm/thread_info_no.h
index c2bde5e..a6512bf 100644
--- a/arch/m68k/include/asm/thread_info_no.h
+++ b/arch/m68k/include/asm/thread_info_no.h
@@ -12,8 +12,6 @@
#ifdef __KERNEL__
-#ifndef __ASSEMBLY__
-
/*
* Size of kernel stack for each process. This must be a power of 2...
*/
@@ -28,6 +26,8 @@
*/
#define THREAD_SIZE (PAGE_SIZE<<THREAD_SIZE_ORDER)
+#ifndef __ASSEMBLY__
+
/*
* low level task data.
*/
diff --git a/arch/m68knommu/Kconfig b/arch/m68knommu/Kconfig
index e2201b9..064f591 100644
--- a/arch/m68knommu/Kconfig
+++ b/arch/m68knommu/Kconfig
@@ -533,6 +533,13 @@
default y
depends on (AVNET5282)
+config UBOOT
+ bool "Support for U-Boot command line parameters"
+ help
+ If you say Y here kernel will try to collect command
+ line parameters from the initial u-boot stack.
+ default n
+
config 4KSTACKS
bool "Use 4Kb for kernel stacks instead of 8Kb"
default y
diff --git a/arch/m68knommu/kernel/process.c b/arch/m68knommu/kernel/process.c
index 8f8f4ab..5c9ecd4 100644
--- a/arch/m68knommu/kernel/process.c
+++ b/arch/m68knommu/kernel/process.c
@@ -352,15 +352,12 @@
char * filename;
struct pt_regs *regs = (struct pt_regs *) &name;
- lock_kernel();
filename = getname(name);
error = PTR_ERR(filename);
if (IS_ERR(filename))
- goto out;
+ return error;
error = do_execve(filename, argv, envp, regs);
putname(filename);
-out:
- unlock_kernel();
return error;
}
diff --git a/arch/m68knommu/kernel/setup.c b/arch/m68knommu/kernel/setup.c
index 5c2bb3e..ba92b90 100644
--- a/arch/m68knommu/kernel/setup.c
+++ b/arch/m68knommu/kernel/setup.c
@@ -29,6 +29,8 @@
#include <linux/bootmem.h>
#include <linux/seq_file.h>
#include <linux/init.h>
+#include <linux/initrd.h>
+#include <linux/root_dev.h>
#include <asm/setup.h>
#include <asm/irq.h>
@@ -52,7 +54,6 @@
void (*mach_halt)(void);
void (*mach_power_off)(void);
-
#ifdef CONFIG_M68000
#define CPU "MC68000"
#endif
@@ -111,6 +112,69 @@
extern int _stext, _etext, _sdata, _edata, _sbss, _ebss, _end;
extern int _ramstart, _ramend;
+#if defined(CONFIG_UBOOT)
+/*
+ * parse_uboot_commandline
+ *
+ * Copies u-boot commandline arguments and store them in the proper linux
+ * variables.
+ *
+ * Assumes:
+ * _init_sp global contains the address in the stack pointer when the
+ * kernel starts (see head.S::_start)
+ *
+ * U-Boot calling convention:
+ * (*kernel) (kbd, initrd_start, initrd_end, cmd_start, cmd_end);
+ *
+ * _init_sp can be parsed as such
+ *
+ * _init_sp+00 = u-boot cmd after jsr into kernel (skip)
+ * _init_sp+04 = &kernel board_info (residual data)
+ * _init_sp+08 = &initrd_start
+ * _init_sp+12 = &initrd_end
+ * _init_sp+16 = &cmd_start
+ * _init_sp+20 = &cmd_end
+ *
+ * This also assumes that the memory locations pointed to are still
+ * unmodified. U-boot places them near the end of external SDRAM.
+ *
+ * Argument(s):
+ * commandp = the linux commandline arg container to fill.
+ * size = the sizeof commandp.
+ *
+ * Returns:
+ */
+void parse_uboot_commandline(char *commandp, int size)
+{
+ extern unsigned long _init_sp;
+ unsigned long *sp;
+ unsigned long uboot_kbd;
+ unsigned long uboot_initrd_start, uboot_initrd_end;
+ unsigned long uboot_cmd_start, uboot_cmd_end;
+
+
+ sp = (unsigned long *)_init_sp;
+ uboot_kbd = sp[1];
+ uboot_initrd_start = sp[2];
+ uboot_initrd_end = sp[3];
+ uboot_cmd_start = sp[4];
+ uboot_cmd_end = sp[5];
+
+ if (uboot_cmd_start && uboot_cmd_end)
+ strncpy(commandp, (const char *)uboot_cmd_start, size);
+#if defined(CONFIG_BLK_DEV_INITRD)
+ if (uboot_initrd_start && uboot_initrd_end &&
+ (uboot_initrd_end > uboot_initrd_start)) {
+ initrd_start = uboot_initrd_start;
+ initrd_end = uboot_initrd_end;
+ ROOT_DEV = Root_RAM0;
+ printk(KERN_INFO "initrd at 0x%lx:0x%lx\n",
+ initrd_start, initrd_end);
+ }
+#endif /* if defined(CONFIG_BLK_DEV_INITRD) */
+}
+#endif /* #if defined(CONFIG_UBOOT) */
+
void __init setup_arch(char **cmdline_p)
{
int bootmap_size;
@@ -128,7 +192,24 @@
#if defined(CONFIG_BOOTPARAM)
strncpy(&command_line[0], CONFIG_BOOTPARAM_STRING, sizeof(command_line));
command_line[sizeof(command_line) - 1] = 0;
-#endif
+#endif /* CONFIG_BOOTPARAM */
+
+#if defined(CONFIG_UBOOT)
+ /* CONFIG_UBOOT and CONFIG_BOOTPARAM defined, concatenate cmdline */
+ #if defined(CONFIG_BOOTPARAM)
+ /* Add the whitespace separator */
+ command_line[strlen(CONFIG_BOOTPARAM_STRING)] = ' ';
+ /* Parse uboot command line into the rest of the buffer */
+ parse_uboot_commandline(
+ &command_line[(strlen(CONFIG_BOOTPARAM_STRING)+1)],
+ (sizeof(command_line) -
+ (strlen(CONFIG_BOOTPARAM_STRING)+1)));
+ /* Only CONFIG_UBOOT defined, create cmdline */
+ #else
+ parse_uboot_commandline(&command_line[0], sizeof(command_line));
+ #endif /* CONFIG_BOOTPARAM */
+ command_line[sizeof(command_line) - 1] = 0;
+#endif /* CONFIG_UBOOT */
printk(KERN_INFO "\x0F\r\n\nuClinux/" CPU "\n");
@@ -204,6 +285,13 @@
free_bootmem(memory_start, memory_end - memory_start);
reserve_bootmem(memory_start, bootmap_size, BOOTMEM_DEFAULT);
+#if defined(CONFIG_UBOOT) && defined(CONFIG_BLK_DEV_INITRD)
+ if ((initrd_start > 0) && (initrd_start < initrd_end) &&
+ (initrd_end < memory_end))
+ reserve_bootmem(initrd_start, initrd_end - initrd_start,
+ BOOTMEM_DEFAULT);
+#endif /* if defined(CONFIG_BLK_DEV_INITRD) */
+
/*
* Get kmalloc into gear.
*/
diff --git a/arch/m68knommu/kernel/vmlinux.lds.S b/arch/m68knommu/kernel/vmlinux.lds.S
index 2736a5e..9f1784f 100644
--- a/arch/m68knommu/kernel/vmlinux.lds.S
+++ b/arch/m68knommu/kernel/vmlinux.lds.S
@@ -8,6 +8,8 @@
*/
#include <asm-generic/vmlinux.lds.h>
+#include <asm/page.h>
+#include <asm/thread_info.h>
#if defined(CONFIG_RAMKERNEL)
#define RAM_START CONFIG_KERNELBASE
@@ -15,7 +17,7 @@
#define TEXT ram
#define DATA ram
#define INIT ram
-#define BSS ram
+#define BSSS ram
#endif
#if defined(CONFIG_ROMKERNEL) || defined(CONFIG_HIMEMKERNEL)
#define RAM_START CONFIG_RAMBASE
@@ -27,7 +29,7 @@
#define TEXT rom
#define DATA ram
#define INIT ram
-#define BSS ram
+#define BSSS ram
#endif
#ifndef DATA_ADDR
@@ -147,40 +149,19 @@
. = ALIGN(4);
_sdata = . ;
DATA_DATA
- . = ALIGN(32);
- *(.data.cacheline_aligned)
- . = ALIGN(8192) ;
- *(.data.init_task)
+ CACHELINE_ALIGNED_DATA(32)
+ INIT_TASK_DATA(THREAD_SIZE)
_edata = . ;
} > DATA
- .init : {
- . = ALIGN(4096);
+ .init.text : {
+ . = ALIGN(PAGE_SIZE);
__init_begin = .;
- _sinittext = .;
- INIT_TEXT
- _einittext = .;
- INIT_DATA
- . = ALIGN(16);
- __setup_start = .;
- *(.init.setup)
- __setup_end = .;
- __initcall_start = .;
- INITCALLS
- __initcall_end = .;
- __con_initcall_start = .;
- *(.con_initcall.init)
- __con_initcall_end = .;
- __security_initcall_start = .;
- *(.security_initcall.init)
- __security_initcall_end = .;
-#ifdef CONFIG_BLK_DEV_INITRD
- . = ALIGN(4);
- __initramfs_start = .;
- *(.init.ramfs)
- __initramfs_end = .;
-#endif
- . = ALIGN(4096);
+ } > INIT
+ INIT_TEXT_SECTION(PAGE_SIZE) > INIT
+ INIT_DATA_SECTION(16) > INIT
+ .init.data : {
+ . = ALIGN(PAGE_SIZE);
__init_end = .;
} > INIT
@@ -192,7 +173,7 @@
. = ALIGN(4) ;
_ebss = . ;
_end = . ;
- } > BSS
+ } > BSSS
DISCARDS
}
diff --git a/arch/m68knommu/platform/523x/gpio.c b/arch/m68knommu/platform/523x/gpio.c
index f02840d..a8842dc 100644
--- a/arch/m68knommu/platform/523x/gpio.c
+++ b/arch/m68knommu/platform/523x/gpio.c
@@ -30,7 +30,8 @@
.direction_output = mcf_gpio_direction_output,
.get = mcf_gpio_get_value,
.set = mcf_gpio_set_value,
- .ngpio = 8,
+ .base = 1,
+ .ngpio = 7,
},
.pddr = MCFEPORT_EPDDR,
.podr = MCFEPORT_EPDR,
@@ -244,7 +245,7 @@
.get = mcf_gpio_get_value,
.set = mcf_gpio_set_value_fast,
.base = 96,
- .ngpio = 4,
+ .ngpio = 8,
},
.pddr = MCFGPIO_PDDR_TIMER,
.podr = MCFGPIO_PODR_TIMER,
diff --git a/arch/m68knommu/platform/527x/gpio.c b/arch/m68knommu/platform/527x/gpio.c
index 1028142..0b56e19 100644
--- a/arch/m68knommu/platform/527x/gpio.c
+++ b/arch/m68knommu/platform/527x/gpio.c
@@ -31,7 +31,8 @@
.direction_output = mcf_gpio_direction_output,
.get = mcf_gpio_get_value,
.set = mcf_gpio_set_value,
- .ngpio = 8,
+ .base = 1,
+ .ngpio = 7,
},
.pddr = MCFEPORT_EPDDR,
.podr = MCFEPORT_EPDR,
@@ -263,7 +264,8 @@
.direction_output = mcf_gpio_direction_output,
.get = mcf_gpio_get_value,
.set = mcf_gpio_set_value,
- .ngpio = 8,
+ .base = 1,
+ .ngpio = 7,
},
.pddr = MCFEPORT_EPDDR,
.podr = MCFEPORT_EPDR,
diff --git a/arch/m68knommu/platform/528x/gpio.c b/arch/m68knommu/platform/528x/gpio.c
index ec59395..eedaf0a 100644
--- a/arch/m68knommu/platform/528x/gpio.c
+++ b/arch/m68knommu/platform/528x/gpio.c
@@ -31,7 +31,7 @@
.get = mcf_gpio_get_value,
.set = mcf_gpio_set_value,
.base = 1,
- .ngpio = 8,
+ .ngpio = 7,
},
.pddr = MCFEPORT_EPDDR,
.podr = MCFEPORT_EPDR,
diff --git a/arch/m68knommu/platform/coldfire/clk.c b/arch/m68knommu/platform/coldfire/clk.c
index 7cdbf44..9f1260c 100644
--- a/arch/m68knommu/platform/coldfire/clk.c
+++ b/arch/m68knommu/platform/coldfire/clk.c
@@ -9,6 +9,7 @@
/***************************************************************************/
#include <linux/kernel.h>
+#include <linux/module.h>
#include <linux/clk.h>
#include <asm/coldfire.h>
@@ -18,23 +19,27 @@
{
return NULL;
}
+EXPORT_SYMBOL(clk_get);
int clk_enable(struct clk *clk)
{
return 0;
}
+EXPORT_SYMBOL(clk_enable);
void clk_disable(struct clk *clk)
{
}
+EXPORT_SYMBOL(clk_disable);
void clk_put(struct clk *clk)
{
}
+EXPORT_SYMBOL(clk_put);
unsigned long clk_get_rate(struct clk *clk)
{
return MCF_CLK;
}
-
+EXPORT_SYMBOL(clk_get_rate);
/***************************************************************************/
diff --git a/arch/m68knommu/platform/coldfire/head.S b/arch/m68knommu/platform/coldfire/head.S
index 2b0d73c..4b91aa2 100644
--- a/arch/m68knommu/platform/coldfire/head.S
+++ b/arch/m68knommu/platform/coldfire/head.S
@@ -106,6 +106,9 @@
.global _ramvec
.global _ramstart
.global _ramend
+#if defined(CONFIG_UBOOT)
+.global _init_sp
+#endif
/*****************************************************************************/
@@ -124,6 +127,10 @@
.long 0
_ramend:
.long 0
+#if defined(CONFIG_UBOOT)
+_init_sp:
+.long 0
+#endif
/*****************************************************************************/
@@ -137,6 +144,9 @@
_start:
nop /* filler */
movew #0x2700, %sr /* no interrupts */
+#if defined(CONFIG_UBOOT)
+ movel %sp,_init_sp /* save initial stack pointer */
+#endif
/*
* Do any platform or board specific setup now. Most boards
diff --git a/arch/microblaze/lib/memcpy.c b/arch/microblaze/lib/memcpy.c
index 6a907c5..cc2108b 100644
--- a/arch/microblaze/lib/memcpy.c
+++ b/arch/microblaze/lib/memcpy.c
@@ -9,7 +9,7 @@
* It is based on demo code originally Copyright 2001 by Intel Corp, taken from
* http://www.embedded.com/showArticle.jhtml?articleID=19205567
*
- * Attempts were made, unsuccesfully, to contact the original
+ * Attempts were made, unsuccessfully, to contact the original
* author of this code (Michael Morrow, Intel). Below is the original
* copyright notice.
*
diff --git a/arch/microblaze/lib/memmove.c b/arch/microblaze/lib/memmove.c
index d4e9f49..0929198 100644
--- a/arch/microblaze/lib/memmove.c
+++ b/arch/microblaze/lib/memmove.c
@@ -9,7 +9,7 @@
* It is based on demo code originally Copyright 2001 by Intel Corp, taken from
* http://www.embedded.com/showArticle.jhtml?articleID=19205567
*
- * Attempts were made, unsuccesfully, to contact the original
+ * Attempts were made, unsuccessfully, to contact the original
* author of this code (Michael Morrow, Intel). Below is the original
* copyright notice.
*
diff --git a/arch/microblaze/lib/memset.c b/arch/microblaze/lib/memset.c
index 941dc8f..4df851d 100644
--- a/arch/microblaze/lib/memset.c
+++ b/arch/microblaze/lib/memset.c
@@ -9,7 +9,7 @@
* It is based on demo code originally Copyright 2001 by Intel Corp, taken from
* http://www.embedded.com/showArticle.jhtml?articleID=19205567
*
- * Attempts were made, unsuccesfully, to contact the original
+ * Attempts were made, unsuccessfully, to contact the original
* author of this code (Michael Morrow, Intel). Below is the original
* copyright notice.
*
diff --git a/arch/mips/include/asm/mach-pnx833x/gpio.h b/arch/mips/include/asm/mach-pnx833x/gpio.h
index 8de0eb9..ed3a88d 100644
--- a/arch/mips/include/asm/mach-pnx833x/gpio.h
+++ b/arch/mips/include/asm/mach-pnx833x/gpio.h
@@ -24,7 +24,7 @@
/* BIG FAT WARNING: races danger!
No protections exist here. Current users are only early init code,
- when locking is not needed because no cuncurency yet exists there,
+ when locking is not needed because no concurrency yet exists there,
and GPIO IRQ dispatcher, which does locking.
However, if many uses will ever happen, proper locking will be needed
- including locking between different uses
diff --git a/arch/mips/include/asm/sgi/ioc.h b/arch/mips/include/asm/sgi/ioc.h
index 343ed15..57a9719 100644
--- a/arch/mips/include/asm/sgi/ioc.h
+++ b/arch/mips/include/asm/sgi/ioc.h
@@ -164,7 +164,7 @@
u32 _unused5;
u8 _write[3];
volatile u8 write;
-#define SGIOC_WRITE_NTHRESH 0x01 /* use 4.5db threshhold */
+#define SGIOC_WRITE_NTHRESH 0x01 /* use 4.5db threshold */
#define SGIOC_WRITE_TPSPEED 0x02 /* use 100ohm TP speed */
#define SGIOC_WRITE_EPSEL 0x04 /* force cable mode: 1=AUI 0=TP */
#define SGIOC_WRITE_EASEL 0x08 /* 1=autoselect 0=manual cable selection */
diff --git a/arch/mips/include/asm/sibyte/sb1250_mac.h b/arch/mips/include/asm/sibyte/sb1250_mac.h
index b6faf08..591b906 100644
--- a/arch/mips/include/asm/sibyte/sb1250_mac.h
+++ b/arch/mips/include/asm/sibyte/sb1250_mac.h
@@ -212,7 +212,7 @@
#define G_MAC_TXD_WEIGHT1(x) _SB_GETVALUE(x, S_MAC_TXD_WEIGHT1, M_MAC_TXD_WEIGHT1)
/*
- * MAC Fifo Threshhold registers (Table 9-14)
+ * MAC Fifo Threshold registers (Table 9-14)
* Register: MAC_THRSH_CFG_0
* Register: MAC_THRSH_CFG_1
* Register: MAC_THRSH_CFG_2
diff --git a/arch/mips/include/asm/sn/sn0/hubio.h b/arch/mips/include/asm/sn/sn0/hubio.h
index d0c29d4..31c76c0 100644
--- a/arch/mips/include/asm/sn/sn0/hubio.h
+++ b/arch/mips/include/asm/sn/sn0/hubio.h
@@ -825,7 +825,7 @@
struct {
u64 rsvd1: 15,
error: 1, /* Widget rcvd wr resp pkt w/ error */
- ovflow: 5, /* Over flow count. perf measurement */
+ ovflow: 5, /* Overflow count. perf measurement */
fire_and_forget: 1, /* Launch Write without response */
mode: 2, /* Widget operation Mode */
rsvd2: 2,
diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c
index 24630fd..a38e3ee 100644
--- a/arch/mips/kernel/smtc.c
+++ b/arch/mips/kernel/smtc.c
@@ -1331,7 +1331,7 @@
if (!((asid += ASID_INC) & ASID_MASK) ) {
if (cpu_has_vtag_icache)
flush_icache_all();
- /* Traverse all online CPUs (hack requires contigous range) */
+ /* Traverse all online CPUs (hack requires contiguous range) */
for_each_online_cpu(i) {
/*
* We don't need to worry about our own CPU, nor those of
diff --git a/arch/mips/math-emu/dp_sub.c b/arch/mips/math-emu/dp_sub.c
index b30c5b1..a2127d6 100644
--- a/arch/mips/math-emu/dp_sub.c
+++ b/arch/mips/math-emu/dp_sub.c
@@ -110,7 +110,7 @@
case CLPAIR(IEEE754_CLASS_DNORM, IEEE754_CLASS_DNORM):
DPDNORMX;
- /* FAAL THOROUGH */
+ /* FALL THROUGH */
case CLPAIR(IEEE754_CLASS_NORM, IEEE754_CLASS_DNORM):
/* normalize ym,ye */
diff --git a/arch/mips/txx9/generic/smsc_fdc37m81x.c b/arch/mips/txx9/generic/smsc_fdc37m81x.c
index a2b2d62..8ebc384 100644
--- a/arch/mips/txx9/generic/smsc_fdc37m81x.c
+++ b/arch/mips/txx9/generic/smsc_fdc37m81x.c
@@ -117,7 +117,7 @@
if (chip_id == SMSC_FDC37M81X_CHIP_ID)
smsc_fdc37m81x_config_end();
else {
- printk(KERN_WARNING "%s: unknow chip id 0x%02x\n", __func__,
+ printk(KERN_WARNING "%s: unknown chip id 0x%02x\n", __func__,
chip_id);
g_smsc_fdc37m81x_base = 0;
}
diff --git a/arch/mn10300/kernel/process.c b/arch/mn10300/kernel/process.c
index 892cce8..ec8a21d 100644
--- a/arch/mn10300/kernel/process.c
+++ b/arch/mn10300/kernel/process.c
@@ -275,16 +275,12 @@
char *filename;
int error;
- lock_kernel();
-
filename = getname(name);
error = PTR_ERR(filename);
- if (!IS_ERR(filename)) {
- error = do_execve(filename, argv, envp, __frame);
- putname(filename);
- }
-
- unlock_kernel();
+ if (IS_ERR(filename))
+ return error;
+ error = do_execve(filename, argv, envp, __frame);
+ putname(filename);
return error;
}
diff --git a/arch/parisc/kernel/perf.c b/arch/parisc/kernel/perf.c
index 75099ef..f9f6783 100644
--- a/arch/parisc/kernel/perf.c
+++ b/arch/parisc/kernel/perf.c
@@ -24,7 +24,7 @@
*
* This driver programs the PCX-U/PCX-W performance counters
* on the PA-RISC 2.0 chips. The driver keeps all images now
- * internally to the kernel to hopefully eliminate the possiblity
+ * internally to the kernel to hopefully eliminate the possibility
* of a bad image halting the CPU. Also, there are different
* images for the PCX-W and later chips vs the PCX-U chips.
*
diff --git a/arch/powerpc/include/asm/reg_fsl_emb.h b/arch/powerpc/include/asm/reg_fsl_emb.h
index 1e180a5..0de404d 100644
--- a/arch/powerpc/include/asm/reg_fsl_emb.h
+++ b/arch/powerpc/include/asm/reg_fsl_emb.h
@@ -39,7 +39,7 @@
#define PMRN_PMLCB2 0x112 /* PM Local Control B2 */
#define PMRN_PMLCB3 0x113 /* PM Local Control B3 */
-#define PMLCB_THRESHMUL_MASK 0x0700 /* Threshhold Multiple Field */
+#define PMLCB_THRESHMUL_MASK 0x0700 /* Threshold Multiple Field */
#define PMLCB_THRESHMUL_SHIFT 8
#define PMLCB_THRESHOLD_MASK 0x003f /* Threshold Field */
diff --git a/arch/powerpc/kernel/kgdb.c b/arch/powerpc/kernel/kgdb.c
index 641c74b..b6bd1ea 100644
--- a/arch/powerpc/kernel/kgdb.c
+++ b/arch/powerpc/kernel/kgdb.c
@@ -52,7 +52,7 @@
{ 0x2030, 0x08 /* SIGFPE */ }, /* spe fp data */
{ 0x2040, 0x08 /* SIGFPE */ }, /* spe fp data */
{ 0x2050, 0x08 /* SIGFPE */ }, /* spe fp round */
- { 0x2060, 0x0e /* SIGILL */ }, /* performace monitor */
+ { 0x2060, 0x0e /* SIGILL */ }, /* performance monitor */
{ 0x2900, 0x08 /* SIGFPE */ }, /* apu unavailable */
{ 0x3100, 0x0e /* SIGALRM */ }, /* fixed interval timer */
{ 0x3200, 0x02 /* SIGINT */ }, /* watchdog */
diff --git a/arch/powerpc/kernel/tau_6xx.c b/arch/powerpc/kernel/tau_6xx.c
index c3a56d6..a753b72 100644
--- a/arch/powerpc/kernel/tau_6xx.c
+++ b/arch/powerpc/kernel/tau_6xx.c
@@ -59,7 +59,7 @@
mtspr(SPRN_THRM1, THRM1_THRES(tau[cpu].low) | THRM1_V | THRM1_TIE | THRM1_TID);
/* setup THRM2,
- * threshold, valid bit, enable interrupts, interrupt when above threshhold
+ * threshold, valid bit, enable interrupts, interrupt when above threshold
*/
mtspr (SPRN_THRM2, THRM1_THRES(tau[cpu].high) | THRM1_V | THRM1_TIE);
#else
diff --git a/arch/powerpc/kernel/vdso.c b/arch/powerpc/kernel/vdso.c
index 137dc22..d84d192 100644
--- a/arch/powerpc/kernel/vdso.c
+++ b/arch/powerpc/kernel/vdso.c
@@ -721,7 +721,7 @@
#ifdef CONFIG_PPC64
/*
- * Fill up the "systemcfg" stuff for backward compatiblity
+ * Fill up the "systemcfg" stuff for backward compatibility
*/
strcpy((char *)vdso_data->eye_catcher, "SYSTEMCFG:PPC64");
vdso_data->version.major = SYSTEMCFG_MAJOR;
diff --git a/arch/powerpc/oprofile/op_model_cell.c b/arch/powerpc/oprofile/op_model_cell.c
index ae06c62..2c9e522 100644
--- a/arch/powerpc/oprofile/op_model_cell.c
+++ b/arch/powerpc/oprofile/op_model_cell.c
@@ -248,7 +248,7 @@
* There is no debug setup required for the cycles event.
* Note that only events in the same group can be used.
* Otherwise, there will be conflicts in correctly routing
- * the signals on the debug bus. It is the responsiblity
+ * the signals on the debug bus. It is the responsibility
* of the OProfile user tool to check the events are in
* the same group.
*/
@@ -1594,7 +1594,7 @@
* to a latch. The new values (interrupt setting bits, reset
* counter value etc.) are not copied to the actual registers
* until the performance monitor is enabled. In order to get
- * this to work as desired, the permormance monitor needs to
+ * this to work as desired, the performance monitor needs to
* be disabled while writing to the latches. This is a
* HW design issue.
*/
@@ -1668,7 +1668,7 @@
* to a latch. The new values (interrupt setting bits, reset
* counter value etc.) are not copied to the actual registers
* until the performance monitor is enabled. In order to get
- * this to work as desired, the permormance monitor needs to
+ * this to work as desired, the performance monitor needs to
* be disabled while writing to the latches. This is a
* HW design issue.
*/
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_pci.c b/arch/powerpc/platforms/52xx/mpc52xx_pci.c
index dd43114..da110bd 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_pci.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_pci.c
@@ -100,7 +100,7 @@
};
/* ======================================================================== */
-/* PCI configuration acess */
+/* PCI configuration access */
/* ======================================================================== */
static int
diff --git a/arch/powerpc/platforms/powermac/pci.c b/arch/powerpc/platforms/powermac/pci.c
index e81403b..ab2027c 100644
--- a/arch/powerpc/platforms/powermac/pci.c
+++ b/arch/powerpc/platforms/powermac/pci.c
@@ -302,7 +302,7 @@
* 1 -> Skip the device but act as if the access was successfull
* (return 0xff's on reads, eventually, cache config space
* accesses in a later version)
- * -1 -> Hide the device (unsuccessful acess)
+ * -1 -> Hide the device (unsuccessful access)
*/
static int u3_ht_skip_device(struct pci_controller *hose,
struct pci_bus *bus, unsigned int devfn)
diff --git a/arch/powerpc/sysdev/dart_iommu.c b/arch/powerpc/sysdev/dart_iommu.c
index ae3c4db..bafc3f8 100644
--- a/arch/powerpc/sysdev/dart_iommu.c
+++ b/arch/powerpc/sysdev/dart_iommu.c
@@ -160,7 +160,7 @@
dp = ((unsigned int*)tbl->it_base) + index;
- /* On U3, all memory is contigous, so we can move this
+ /* On U3, all memory is contiguous, so we can move this
* out of the loop.
*/
l = npages;
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 16c6730..c802352 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -220,23 +220,8 @@
bool
default y
-config S390_SWITCH_AMODE
- bool "Switch kernel/user addressing modes"
- help
- This option allows to switch the addressing modes of kernel and user
- space. The kernel parameter switch_amode=on will enable this feature,
- default is disabled. Enabling this (via kernel parameter) on machines
- earlier than IBM System z9-109 EC/BC will reduce system performance.
-
- Note that this option will also be selected by selecting the execute
- protection option below. Enabling the execute protection via the
- noexec kernel parameter will also switch the addressing modes,
- independent of the switch_amode kernel parameter.
-
-
config S390_EXEC_PROTECT
bool "Data execute protection"
- select S390_SWITCH_AMODE
help
This option allows to enable a buffer overflow protection for user
space programs and it also selects the addressing mode option above.
diff --git a/arch/s390/crypto/prng.c b/arch/s390/crypto/prng.c
index b49c00c..a320990 100644
--- a/arch/s390/crypto/prng.c
+++ b/arch/s390/crypto/prng.c
@@ -6,7 +6,6 @@
#include <linux/fs.h>
#include <linux/init.h>
#include <linux/kernel.h>
-#include <linux/smp_lock.h>
#include <linux/miscdevice.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
@@ -49,7 +48,6 @@
static int prng_open(struct inode *inode, struct file *file)
{
- cycle_kernel_lock();
return nonseekable_open(inode, file);
}
diff --git a/arch/s390/defconfig b/arch/s390/defconfig
index ab44644..f4e53c6 100644
--- a/arch/s390/defconfig
+++ b/arch/s390/defconfig
@@ -185,7 +185,6 @@
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_AUDIT_ARCH=y
-CONFIG_S390_SWITCH_AMODE=y
CONFIG_S390_EXEC_PROTECT=y
#
diff --git a/arch/s390/include/asm/atomic.h b/arch/s390/include/asm/atomic.h
index ae7c8f9..2a113d6 100644
--- a/arch/s390/include/asm/atomic.h
+++ b/arch/s390/include/asm/atomic.h
@@ -21,7 +21,7 @@
#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2)
#define __CS_LOOP(ptr, op_val, op_string) ({ \
- typeof(ptr->counter) old_val, new_val; \
+ int old_val, new_val; \
asm volatile( \
" l %0,%2\n" \
"0: lr %1,%0\n" \
@@ -38,7 +38,7 @@
#else /* __GNUC__ */
#define __CS_LOOP(ptr, op_val, op_string) ({ \
- typeof(ptr->counter) old_val, new_val; \
+ int old_val, new_val; \
asm volatile( \
" l %0,0(%3)\n" \
"0: lr %1,%0\n" \
@@ -143,7 +143,7 @@
#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2)
#define __CSG_LOOP(ptr, op_val, op_string) ({ \
- typeof(ptr->counter) old_val, new_val; \
+ long long old_val, new_val; \
asm volatile( \
" lg %0,%2\n" \
"0: lgr %1,%0\n" \
@@ -160,7 +160,7 @@
#else /* __GNUC__ */
#define __CSG_LOOP(ptr, op_val, op_string) ({ \
- typeof(ptr->counter) old_val, new_val; \
+ long long old_val, new_val; \
asm volatile( \
" lg %0,0(%3)\n" \
"0: lgr %1,%0\n" \
diff --git a/arch/s390/include/asm/ccwdev.h b/arch/s390/include/asm/ccwdev.h
index 2a54195..f4bd346 100644
--- a/arch/s390/include/asm/ccwdev.h
+++ b/arch/s390/include/asm/ccwdev.h
@@ -142,6 +142,8 @@
extern int ccw_device_set_options_mask(struct ccw_device *, unsigned long);
extern int ccw_device_set_options(struct ccw_device *, unsigned long);
extern void ccw_device_clear_options(struct ccw_device *, unsigned long);
+int ccw_device_is_pathgroup(struct ccw_device *cdev);
+int ccw_device_is_multipath(struct ccw_device *cdev);
/* Allow for i/o completion notification after primary interrupt status. */
#define CCWDEV_EARLY_NOTIFICATION 0x0001
@@ -151,6 +153,8 @@
#define CCWDEV_DO_PATHGROUP 0x0004
/* Allow forced onlining of boxed devices. */
#define CCWDEV_ALLOW_FORCE 0x0008
+/* Try to use multipath mode. */
+#define CCWDEV_DO_MULTIPATH 0x0010
extern int ccw_device_start(struct ccw_device *, struct ccw1 *,
unsigned long, __u8, unsigned long);
diff --git a/arch/s390/include/asm/mmu_context.h b/arch/s390/include/asm/mmu_context.h
index fc7edd6..976e273 100644
--- a/arch/s390/include/asm/mmu_context.h
+++ b/arch/s390/include/asm/mmu_context.h
@@ -36,7 +36,7 @@
mm->context.has_pgste = 1;
mm->context.alloc_pgste = 1;
} else {
- mm->context.noexec = s390_noexec;
+ mm->context.noexec = (user_mode == SECONDARY_SPACE_MODE);
mm->context.has_pgste = 0;
mm->context.alloc_pgste = 0;
}
@@ -58,7 +58,7 @@
pgd_t *pgd = mm->pgd;
S390_lowcore.user_asce = mm->context.asce_bits | __pa(pgd);
- if (switch_amode) {
+ if (user_mode != HOME_SPACE_MODE) {
/* Load primary space page table origin. */
pgd = mm->context.noexec ? get_shadow_table(pgd) : pgd;
S390_lowcore.user_exec_asce = mm->context.asce_bits | __pa(pgd);
diff --git a/arch/s390/include/asm/pgalloc.h b/arch/s390/include/asm/pgalloc.h
index ddad590..68940d0 100644
--- a/arch/s390/include/asm/pgalloc.h
+++ b/arch/s390/include/asm/pgalloc.h
@@ -143,7 +143,8 @@
spin_lock_init(&mm->context.list_lock);
INIT_LIST_HEAD(&mm->context.crst_list);
INIT_LIST_HEAD(&mm->context.pgtable_list);
- return (pgd_t *) crst_table_alloc(mm, s390_noexec);
+ return (pgd_t *)
+ crst_table_alloc(mm, user_mode == SECONDARY_SPACE_MODE);
}
#define pgd_free(mm, pgd) crst_table_free(mm, (unsigned long *) pgd)
diff --git a/arch/s390/include/asm/pgtable.h b/arch/s390/include/asm/pgtable.h
index 60a7b1a..e2fa79c 100644
--- a/arch/s390/include/asm/pgtable.h
+++ b/arch/s390/include/asm/pgtable.h
@@ -169,12 +169,13 @@
* STL Segment-Table-Length: Segment-table length (STL+1*16 entries -> up to 2048)
*
* A 64 bit pagetable entry of S390 has following format:
- * | PFRA |0IP0| OS |
+ * | PFRA |0IPC| OS |
* 0000000000111111111122222222223333333333444444444455555555556666
* 0123456789012345678901234567890123456789012345678901234567890123
*
* I Page-Invalid Bit: Page is not available for address-translation
* P Page-Protection Bit: Store access not possible for page
+ * C Change-bit override: HW is not required to set change bit
*
* A 64 bit segmenttable entry of S390 has following format:
* | P-table origin | TT
@@ -218,6 +219,7 @@
*/
/* Hardware bits in the page table entry */
+#define _PAGE_CO 0x100 /* HW Change-bit override */
#define _PAGE_RO 0x200 /* HW read-only bit */
#define _PAGE_INVALID 0x400 /* HW invalid bit */
diff --git a/arch/s390/include/asm/setup.h b/arch/s390/include/asm/setup.h
index e37478e..52a779c 100644
--- a/arch/s390/include/asm/setup.h
+++ b/arch/s390/include/asm/setup.h
@@ -49,17 +49,12 @@
void detect_memory_layout(struct mem_chunk chunk[]);
-#ifdef CONFIG_S390_SWITCH_AMODE
-extern unsigned int switch_amode;
-#else
-#define switch_amode (0)
-#endif
+#define PRIMARY_SPACE_MODE 0
+#define ACCESS_REGISTER_MODE 1
+#define SECONDARY_SPACE_MODE 2
+#define HOME_SPACE_MODE 3
-#ifdef CONFIG_S390_EXEC_PROTECT
-extern unsigned int s390_noexec;
-#else
-#define s390_noexec (0)
-#endif
+extern unsigned int user_mode;
/*
* Machine features detected in head.S
diff --git a/arch/s390/include/asm/smp.h b/arch/s390/include/asm/smp.h
index a868b27..2ab1141 100644
--- a/arch/s390/include/asm/smp.h
+++ b/arch/s390/include/asm/smp.h
@@ -1,57 +1,22 @@
/*
- * include/asm-s390/smp.h
- *
- * S390 version
- * Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
- * Author(s): Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com),
- * Martin Schwidefsky (schwidefsky@de.ibm.com)
- * Heiko Carstens (heiko.carstens@de.ibm.com)
+ * Copyright IBM Corp. 1999,2009
+ * Author(s): Denis Joseph Barrow,
+ * Martin Schwidefsky <schwidefsky@de.ibm.com>,
+ * Heiko Carstens <heiko.carstens@de.ibm.com>,
*/
#ifndef __ASM_SMP_H
#define __ASM_SMP_H
-#include <linux/threads.h>
-#include <linux/cpumask.h>
-#include <linux/bitops.h>
+#ifdef CONFIG_SMP
-#if defined(__KERNEL__) && defined(CONFIG_SMP) && !defined(__ASSEMBLY__)
-
-#include <asm/lowcore.h>
-#include <asm/sigp.h>
-#include <asm/ptrace.h>
#include <asm/system.h>
-
-/*
- s390 specific smp.c headers
- */
-typedef struct
-{
- int intresting;
- sigp_ccode ccode;
- __u32 status;
- __u16 cpu;
-} sigp_info;
+#include <asm/sigp.h>
extern void machine_restart_smp(char *);
extern void machine_halt_smp(void);
extern void machine_power_off_smp(void);
-#define NO_PROC_ID 0xFF /* No processor magic marker */
-
-/*
- * This magic constant controls our willingness to transfer
- * a process across CPUs. Such a transfer incurs misses on the L1
- * cache, and on a P6 or P5 with multiple L2 caches L2 hits. My
- * gut feeling is this will vary by board in value. For a board
- * with separate L2 cache it probably depends also on the RSS, and
- * for a board with shared L2 cache it ought to decay fast as other
- * processes are run.
- */
-
-#define PROC_CHANGE_PENALTY 20 /* Schedule penalty */
-
#define raw_smp_processor_id() (S390_lowcore.cpu_nr)
-#define cpu_logical_map(cpu) (cpu)
extern int __cpu_disable (void);
extern void __cpu_die (unsigned int cpu);
@@ -64,7 +29,9 @@
extern void arch_send_call_function_single_ipi(int cpu);
extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
-#endif
+extern union save_area *zfcpdump_save_areas[NR_CPUS + 1];
+
+#endif /* CONFIG_SMP */
#ifdef CONFIG_HOTPLUG_CPU
extern int smp_rescan_cpus(void);
@@ -72,5 +39,4 @@
static inline int smp_rescan_cpus(void) { return 0; }
#endif
-extern union save_area *zfcpdump_save_areas[NR_CPUS + 1];
-#endif
+#endif /* __ASM_SMP_H */
diff --git a/arch/s390/include/asm/sockios.h b/arch/s390/include/asm/sockios.h
index f4fc16c..6f60eee 100644
--- a/arch/s390/include/asm/sockios.h
+++ b/arch/s390/include/asm/sockios.h
@@ -1,21 +1,6 @@
-/*
- * include/asm-s390/sockios.h
- *
- * S390 version
- *
- * Derived from "include/asm-i386/sockios.h"
- */
+#ifndef _ASM_S390_SOCKIOS_H
+#define _ASM_S390_SOCKIOS_H
-#ifndef __ARCH_S390_SOCKIOS__
-#define __ARCH_S390_SOCKIOS__
-
-/* Socket-level I/O control calls. */
-#define FIOSETOWN 0x8901
-#define SIOCSPGRP 0x8902
-#define FIOGETOWN 0x8903
-#define SIOCGPGRP 0x8904
-#define SIOCATMARK 0x8905
-#define SIOCGSTAMP 0x8906 /* Get stamp (timeval) */
-#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */
+#include <asm-generic/sockios.h>
#endif
diff --git a/arch/s390/include/asm/termbits.h b/arch/s390/include/asm/termbits.h
index 5873185..71bf6ac 100644
--- a/arch/s390/include/asm/termbits.h
+++ b/arch/s390/include/asm/termbits.h
@@ -1,206 +1,6 @@
-/*
- * include/asm-s390/termbits.h
- *
- * S390 version
- *
- * Derived from "include/asm-i386/termbits.h"
- */
+#ifndef _ASM_S390_TERMBITS_H
+#define _ASM_S390_TERMBITS_H
-#ifndef __ARCH_S390_TERMBITS_H__
-#define __ARCH_S390_TERMBITS_H__
-
-#include <linux/posix_types.h>
-
-typedef unsigned char cc_t;
-typedef unsigned int speed_t;
-typedef unsigned int tcflag_t;
-
-#define NCCS 19
-struct termios {
- tcflag_t c_iflag; /* input mode flags */
- tcflag_t c_oflag; /* output mode flags */
- tcflag_t c_cflag; /* control mode flags */
- tcflag_t c_lflag; /* local mode flags */
- cc_t c_line; /* line discipline */
- cc_t c_cc[NCCS]; /* control characters */
-};
-
-struct termios2 {
- tcflag_t c_iflag; /* input mode flags */
- tcflag_t c_oflag; /* output mode flags */
- tcflag_t c_cflag; /* control mode flags */
- tcflag_t c_lflag; /* local mode flags */
- cc_t c_line; /* line discipline */
- cc_t c_cc[NCCS]; /* control characters */
- speed_t c_ispeed; /* input speed */
- speed_t c_ospeed; /* output speed */
-};
-
-struct ktermios {
- tcflag_t c_iflag; /* input mode flags */
- tcflag_t c_oflag; /* output mode flags */
- tcflag_t c_cflag; /* control mode flags */
- tcflag_t c_lflag; /* local mode flags */
- cc_t c_line; /* line discipline */
- cc_t c_cc[NCCS]; /* control characters */
- speed_t c_ispeed; /* input speed */
- speed_t c_ospeed; /* output speed */
-};
-
-/* c_cc characters */
-#define VINTR 0
-#define VQUIT 1
-#define VERASE 2
-#define VKILL 3
-#define VEOF 4
-#define VTIME 5
-#define VMIN 6
-#define VSWTC 7
-#define VSTART 8
-#define VSTOP 9
-#define VSUSP 10
-#define VEOL 11
-#define VREPRINT 12
-#define VDISCARD 13
-#define VWERASE 14
-#define VLNEXT 15
-#define VEOL2 16
-
-/* c_iflag bits */
-#define IGNBRK 0000001
-#define BRKINT 0000002
-#define IGNPAR 0000004
-#define PARMRK 0000010
-#define INPCK 0000020
-#define ISTRIP 0000040
-#define INLCR 0000100
-#define IGNCR 0000200
-#define ICRNL 0000400
-#define IUCLC 0001000
-#define IXON 0002000
-#define IXANY 0004000
-#define IXOFF 0010000
-#define IMAXBEL 0020000
-#define IUTF8 0040000
-
-/* c_oflag bits */
-#define OPOST 0000001
-#define OLCUC 0000002
-#define ONLCR 0000004
-#define OCRNL 0000010
-#define ONOCR 0000020
-#define ONLRET 0000040
-#define OFILL 0000100
-#define OFDEL 0000200
-#define NLDLY 0000400
-#define NL0 0000000
-#define NL1 0000400
-#define CRDLY 0003000
-#define CR0 0000000
-#define CR1 0001000
-#define CR2 0002000
-#define CR3 0003000
-#define TABDLY 0014000
-#define TAB0 0000000
-#define TAB1 0004000
-#define TAB2 0010000
-#define TAB3 0014000
-#define XTABS 0014000
-#define BSDLY 0020000
-#define BS0 0000000
-#define BS1 0020000
-#define VTDLY 0040000
-#define VT0 0000000
-#define VT1 0040000
-#define FFDLY 0100000
-#define FF0 0000000
-#define FF1 0100000
-
-/* c_cflag bit meaning */
-#define CBAUD 0010017
-#define B0 0000000 /* hang up */
-#define B50 0000001
-#define B75 0000002
-#define B110 0000003
-#define B134 0000004
-#define B150 0000005
-#define B200 0000006
-#define B300 0000007
-#define B600 0000010
-#define B1200 0000011
-#define B1800 0000012
-#define B2400 0000013
-#define B4800 0000014
-#define B9600 0000015
-#define B19200 0000016
-#define B38400 0000017
-#define EXTA B19200
-#define EXTB B38400
-#define CSIZE 0000060
-#define CS5 0000000
-#define CS6 0000020
-#define CS7 0000040
-#define CS8 0000060
-#define CSTOPB 0000100
-#define CREAD 0000200
-#define PARENB 0000400
-#define PARODD 0001000
-#define HUPCL 0002000
-#define CLOCAL 0004000
-#define CBAUDEX 0010000
-#define BOTHER 0010000
-#define B57600 0010001
-#define B115200 0010002
-#define B230400 0010003
-#define B460800 0010004
-#define B500000 0010005
-#define B576000 0010006
-#define B921600 0010007
-#define B1000000 0010010
-#define B1152000 0010011
-#define B1500000 0010012
-#define B2000000 0010013
-#define B2500000 0010014
-#define B3000000 0010015
-#define B3500000 0010016
-#define B4000000 0010017
-#define CIBAUD 002003600000 /* input baud rate */
-#define CMSPAR 010000000000 /* mark or space (stick) parity */
-#define CRTSCTS 020000000000 /* flow control */
-
-#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */
-
-/* c_lflag bits */
-#define ISIG 0000001
-#define ICANON 0000002
-#define XCASE 0000004
-#define ECHO 0000010
-#define ECHOE 0000020
-#define ECHOK 0000040
-#define ECHONL 0000100
-#define NOFLSH 0000200
-#define TOSTOP 0000400
-#define ECHOCTL 0001000
-#define ECHOPRT 0002000
-#define ECHOKE 0004000
-#define FLUSHO 0010000
-#define PENDIN 0040000
-#define IEXTEN 0100000
-
-/* tcflow() and TCXONC use these */
-#define TCOOFF 0
-#define TCOON 1
-#define TCIOFF 2
-#define TCION 3
-
-/* tcflush() and TCFLSH use these */
-#define TCIFLUSH 0
-#define TCOFLUSH 1
-#define TCIOFLUSH 2
-
-/* tcsetattr uses these */
-#define TCSANOW 0
-#define TCSADRAIN 1
-#define TCSAFLUSH 2
+#include <asm-generic/termbits.h>
#endif
diff --git a/arch/s390/include/asm/todclk.h b/arch/s390/include/asm/todclk.h
deleted file mode 100644
index c7f6205..0000000
--- a/arch/s390/include/asm/todclk.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * File...........: linux/include/asm/todclk.h
- * Author(s)......: Holger Smolinski <Holger.Smolinski@de.ibm.com>
- * Bugreports.to..: <Linux390@de.ibm.com>
- * (C) IBM Corporation, IBM Deutschland Entwicklung GmbH, 1999,2000
- *
- * History of changes (starts July 2000)
- */
-
-#ifndef __ASM_TODCLK_H
-#define __ASM_TODCLK_H
-
-#ifdef __KERNEL__
-
-#define TOD_uSEC (0x1000ULL)
-#define TOD_mSEC (1000 * TOD_uSEC)
-#define TOD_SEC (1000 * TOD_mSEC)
-#define TOD_MIN (60 * TOD_SEC)
-#define TOD_HOUR (60 * TOD_MIN)
-
-#endif
-
-#endif
diff --git a/arch/s390/include/asm/uaccess.h b/arch/s390/include/asm/uaccess.h
index 8377e91..cbf0a87 100644
--- a/arch/s390/include/asm/uaccess.h
+++ b/arch/s390/include/asm/uaccess.h
@@ -93,6 +93,8 @@
extern struct uaccess_ops uaccess_mvcos_switch;
extern struct uaccess_ops uaccess_pt;
+extern int __handle_fault(unsigned long, unsigned long, int);
+
static inline int __put_user_fn(size_t size, void __user *ptr, void *x)
{
size = uaccess.copy_to_user_small(size, ptr, x);
diff --git a/arch/s390/kernel/Makefile b/arch/s390/kernel/Makefile
index c7be8e1..683f638 100644
--- a/arch/s390/kernel/Makefile
+++ b/arch/s390/kernel/Makefile
@@ -44,6 +44,7 @@
obj-$(CONFIG_FUNCTION_TRACER) += $(if $(CONFIG_64BIT),mcount64.o,mcount.o)
obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o
obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += ftrace.o
+obj-$(CONFIG_FTRACE_SYSCALLS) += ftrace.o
# Kexec part
S390_KEXEC_OBJS := machine_kexec.o crash.o
diff --git a/arch/s390/kernel/compat_linux.c b/arch/s390/kernel/compat_linux.c
index fda1a81..25c31d6 100644
--- a/arch/s390/kernel/compat_linux.c
+++ b/arch/s390/kernel/compat_linux.c
@@ -31,14 +31,8 @@
#include <linux/shm.h>
#include <linux/slab.h>
#include <linux/uio.h>
-#include <linux/nfs_fs.h>
#include <linux/quota.h>
#include <linux/module.h>
-#include <linux/sunrpc/svc.h>
-#include <linux/nfsd/nfsd.h>
-#include <linux/nfsd/cache.h>
-#include <linux/nfsd/xdr.h>
-#include <linux/nfsd/syscall.h>
#include <linux/poll.h>
#include <linux/personality.h>
#include <linux/stat.h>
diff --git a/arch/s390/kernel/compat_linux.h b/arch/s390/kernel/compat_linux.h
index 45e9092..cb97afc 100644
--- a/arch/s390/kernel/compat_linux.h
+++ b/arch/s390/kernel/compat_linux.h
@@ -4,10 +4,6 @@
#include <linux/compat.h>
#include <linux/socket.h>
#include <linux/syscalls.h>
-#include <linux/nfs_fs.h>
-#include <linux/sunrpc/svc.h>
-#include <linux/nfsd/nfsd.h>
-#include <linux/nfsd/export.h>
/* Macro that masks the high order bit of an 32 bit pointer and converts it*/
/* to a 64 bit pointer */
diff --git a/arch/s390/kernel/head64.S b/arch/s390/kernel/head64.S
index 6a25080..d984a2a 100644
--- a/arch/s390/kernel/head64.S
+++ b/arch/s390/kernel/head64.S
@@ -83,6 +83,8 @@
slr %r0,%r0 # set cpuid to zero
sigp %r1,%r0,0x12 # switch to esame mode
sam64 # switch to 64 bit mode
+ llgfr %r13,%r13 # clear high-order half of base reg
+ lmh %r0,%r15,.Lzero64-.LPG1(%r13) # clear high-order half
lctlg %c0,%c15,.Lctl-.LPG1(%r13) # load control registers
lg %r12,.Lparmaddr-.LPG1(%r13) # pointer to parameter area
# move IPL device to lowcore
@@ -127,6 +129,7 @@
.L4malign:.quad 0xffffffffffc00000
.Lscan2g:.quad 0x80000000 + 0x20000 - 8 # 2GB + 128K - 8
.Lnop: .long 0x07000700
+.Lzero64:.fill 16,4,0x0
#ifdef CONFIG_ZFCPDUMP
.Lcurrent_cpu:
.long 0x0
diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
index 061479f..0663287 100644
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -305,9 +305,8 @@
}
early_param("mem", early_parse_mem);
-#ifdef CONFIG_S390_SWITCH_AMODE
-unsigned int switch_amode = 0;
-EXPORT_SYMBOL_GPL(switch_amode);
+unsigned int user_mode = HOME_SPACE_MODE;
+EXPORT_SYMBOL_GPL(user_mode);
static int set_amode_and_uaccess(unsigned long user_amode,
unsigned long user32_amode)
@@ -340,23 +339,29 @@
*/
static int __init early_parse_switch_amode(char *p)
{
- switch_amode = 1;
+ if (user_mode != SECONDARY_SPACE_MODE)
+ user_mode = PRIMARY_SPACE_MODE;
return 0;
}
early_param("switch_amode", early_parse_switch_amode);
-#else /* CONFIG_S390_SWITCH_AMODE */
-static inline int set_amode_and_uaccess(unsigned long user_amode,
- unsigned long user32_amode)
+static int __init early_parse_user_mode(char *p)
{
+ if (p && strcmp(p, "primary") == 0)
+ user_mode = PRIMARY_SPACE_MODE;
+#ifdef CONFIG_S390_EXEC_PROTECT
+ else if (p && strcmp(p, "secondary") == 0)
+ user_mode = SECONDARY_SPACE_MODE;
+#endif
+ else if (!p || strcmp(p, "home") == 0)
+ user_mode = HOME_SPACE_MODE;
+ else
+ return 1;
return 0;
}
-#endif /* CONFIG_S390_SWITCH_AMODE */
+early_param("user_mode", early_parse_user_mode);
#ifdef CONFIG_S390_EXEC_PROTECT
-unsigned int s390_noexec = 0;
-EXPORT_SYMBOL_GPL(s390_noexec);
-
/*
* Enable execute protection?
*/
@@ -364,8 +369,7 @@
{
if (!strncmp(p, "off", 3))
return 0;
- switch_amode = 1;
- s390_noexec = 1;
+ user_mode = SECONDARY_SPACE_MODE;
return 0;
}
early_param("noexec", early_parse_noexec);
@@ -373,7 +377,7 @@
static void setup_addressing_mode(void)
{
- if (s390_noexec) {
+ if (user_mode == SECONDARY_SPACE_MODE) {
if (set_amode_and_uaccess(PSW_ASC_SECONDARY,
PSW32_ASC_SECONDARY))
pr_info("Execute protection active, "
@@ -381,7 +385,7 @@
else
pr_info("Execute protection active, "
"mvcos not available\n");
- } else if (switch_amode) {
+ } else if (user_mode == PRIMARY_SPACE_MODE) {
if (set_amode_and_uaccess(PSW_ASC_PRIMARY, PSW32_ASC_PRIMARY))
pr_info("Address spaces switched, "
"mvcos available\n");
@@ -411,7 +415,7 @@
lc->restart_psw.mask = PSW_BASE_BITS | PSW_DEFAULT_KEY;
lc->restart_psw.addr =
PSW_ADDR_AMODE | (unsigned long) restart_int_handler;
- if (switch_amode)
+ if (user_mode != HOME_SPACE_MODE)
lc->restart_psw.mask |= PSW_ASC_HOME;
lc->external_new_psw.mask = psw_kernel_bits;
lc->external_new_psw.addr =
diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c
index 68e1ecf..65065ac 100644
--- a/arch/s390/kernel/time.c
+++ b/arch/s390/kernel/time.c
@@ -335,7 +335,7 @@
sw0 = atomic_read(sw_ptr);
*clock = get_clock();
sw1 = atomic_read(sw_ptr);
- put_cpu_var(clock_sync_sync);
+ put_cpu_var(clock_sync_word);
if (sw0 == sw1 && (sw0 & 0x80000000U))
/* Success: time is in sync. */
return 0;
@@ -385,7 +385,7 @@
sw_ptr = &get_cpu_var(clock_sync_word);
rc = (atomic_read(sw_ptr) & 0x80000000U) != 0;
- put_cpu_var(clock_sync_sync);
+ put_cpu_var(clock_sync_word);
return rc;
}
diff --git a/arch/s390/kernel/vdso.c b/arch/s390/kernel/vdso.c
index adfb32a..5f99e66 100644
--- a/arch/s390/kernel/vdso.c
+++ b/arch/s390/kernel/vdso.c
@@ -86,7 +86,8 @@
unsigned int facility_list;
facility_list = stfl();
- vd->ectg_available = switch_amode && (facility_list & 1);
+ vd->ectg_available =
+ user_mode != HOME_SPACE_MODE && (facility_list & 1);
}
#ifdef CONFIG_64BIT
@@ -114,7 +115,7 @@
lowcore->vdso_per_cpu_data = __LC_PASTE;
- if (!switch_amode || !vdso_enabled)
+ if (user_mode == HOME_SPACE_MODE || !vdso_enabled)
return 0;
segment_table = __get_free_pages(GFP_KERNEL, SEGMENT_ORDER);
@@ -160,7 +161,7 @@
unsigned long segment_table, page_table, page_frame;
u32 *psal, *aste;
- if (!switch_amode || !vdso_enabled)
+ if (user_mode == HOME_SPACE_MODE || !vdso_enabled)
return;
psal = (u32 *)(addr_t) lowcore->paste[4];
@@ -184,7 +185,7 @@
static void vdso_init_cr5(void)
{
- if (switch_amode && vdso_enabled)
+ if (user_mode != HOME_SPACE_MODE && vdso_enabled)
on_each_cpu(__vdso_init_cr5, NULL, 1);
}
#endif /* CONFIG_64BIT */
diff --git a/arch/s390/kvm/Kconfig b/arch/s390/kvm/Kconfig
index bf164fc..6ee55ae 100644
--- a/arch/s390/kvm/Kconfig
+++ b/arch/s390/kvm/Kconfig
@@ -20,7 +20,6 @@
depends on HAVE_KVM && EXPERIMENTAL
select PREEMPT_NOTIFIERS
select ANON_INODES
- select S390_SWITCH_AMODE
---help---
Support hosting paravirtualized guest machines using the SIE
virtualization capability on the mainframe. This should work
diff --git a/arch/s390/lib/uaccess_mvcos.c b/arch/s390/lib/uaccess_mvcos.c
index 58da3f4..60455f1 100644
--- a/arch/s390/lib/uaccess_mvcos.c
+++ b/arch/s390/lib/uaccess_mvcos.c
@@ -162,7 +162,6 @@
return size;
}
-#ifdef CONFIG_S390_SWITCH_AMODE
static size_t strnlen_user_mvcos(size_t count, const char __user *src)
{
char buf[256];
@@ -200,7 +199,6 @@
} while ((len_str == len) && (done < count));
return done;
}
-#endif /* CONFIG_S390_SWITCH_AMODE */
struct uaccess_ops uaccess_mvcos = {
.copy_from_user = copy_from_user_mvcos_check,
@@ -215,7 +213,6 @@
.futex_atomic_cmpxchg = futex_atomic_cmpxchg_std,
};
-#ifdef CONFIG_S390_SWITCH_AMODE
struct uaccess_ops uaccess_mvcos_switch = {
.copy_from_user = copy_from_user_mvcos,
.copy_from_user_small = copy_from_user_mvcos,
@@ -228,4 +225,3 @@
.futex_atomic_op = futex_atomic_op_pt,
.futex_atomic_cmpxchg = futex_atomic_cmpxchg_pt,
};
-#endif
diff --git a/arch/s390/lib/uaccess_pt.c b/arch/s390/lib/uaccess_pt.c
index cb5d59e..404f2de 100644
--- a/arch/s390/lib/uaccess_pt.c
+++ b/arch/s390/lib/uaccess_pt.c
@@ -23,86 +23,21 @@
pgd = pgd_offset(mm, addr);
if (pgd_none(*pgd) || unlikely(pgd_bad(*pgd)))
- return NULL;
+ return (pte_t *) 0x3a;
pud = pud_offset(pgd, addr);
if (pud_none(*pud) || unlikely(pud_bad(*pud)))
- return NULL;
+ return (pte_t *) 0x3b;
pmd = pmd_offset(pud, addr);
if (pmd_none(*pmd) || unlikely(pmd_bad(*pmd)))
- return NULL;
+ return (pte_t *) 0x10;
return pte_offset_map(pmd, addr);
}
-static int __handle_fault(struct mm_struct *mm, unsigned long address,
- int write_access)
-{
- struct vm_area_struct *vma;
- int ret = -EFAULT;
- int fault;
-
- if (in_atomic())
- return ret;
- down_read(&mm->mmap_sem);
- vma = find_vma(mm, address);
- if (unlikely(!vma))
- goto out;
- if (unlikely(vma->vm_start > address)) {
- if (!(vma->vm_flags & VM_GROWSDOWN))
- goto out;
- if (expand_stack(vma, address))
- goto out;
- }
-
- if (!write_access) {
- /* page not present, check vm flags */
- if (!(vma->vm_flags & (VM_READ | VM_EXEC | VM_WRITE)))
- goto out;
- } else {
- if (!(vma->vm_flags & VM_WRITE))
- goto out;
- }
-
-survive:
- fault = handle_mm_fault(mm, vma, address, write_access ? FAULT_FLAG_WRITE : 0);
- if (unlikely(fault & VM_FAULT_ERROR)) {
- if (fault & VM_FAULT_OOM)
- goto out_of_memory;
- else if (fault & VM_FAULT_SIGBUS)
- goto out_sigbus;
- BUG();
- }
- if (fault & VM_FAULT_MAJOR)
- current->maj_flt++;
- else
- current->min_flt++;
- ret = 0;
-out:
- up_read(&mm->mmap_sem);
- return ret;
-
-out_of_memory:
- up_read(&mm->mmap_sem);
- if (is_global_init(current)) {
- yield();
- down_read(&mm->mmap_sem);
- goto survive;
- }
- printk("VM: killing process %s\n", current->comm);
- return ret;
-
-out_sigbus:
- up_read(&mm->mmap_sem);
- current->thread.prot_addr = address;
- current->thread.trap_no = 0x11;
- force_sig(SIGBUS, current);
- return ret;
-}
-
-static size_t __user_copy_pt(unsigned long uaddr, void *kptr,
- size_t n, int write_user)
+static __always_inline size_t __user_copy_pt(unsigned long uaddr, void *kptr,
+ size_t n, int write_user)
{
struct mm_struct *mm = current->mm;
unsigned long offset, pfn, done, size;
@@ -114,12 +49,17 @@
spin_lock(&mm->page_table_lock);
do {
pte = follow_table(mm, uaddr);
- if (!pte || !pte_present(*pte) ||
- (write_user && !pte_write(*pte)))
+ if ((unsigned long) pte < 0x1000)
goto fault;
+ if (!pte_present(*pte)) {
+ pte = (pte_t *) 0x11;
+ goto fault;
+ } else if (write_user && !pte_write(*pte)) {
+ pte = (pte_t *) 0x04;
+ goto fault;
+ }
pfn = pte_pfn(*pte);
-
offset = uaddr & (PAGE_SIZE - 1);
size = min(n - done, PAGE_SIZE - offset);
if (write_user) {
@@ -137,7 +77,7 @@
return n - done;
fault:
spin_unlock(&mm->page_table_lock);
- if (__handle_fault(mm, uaddr, write_user))
+ if (__handle_fault(uaddr, (unsigned long) pte, write_user))
return n - done;
goto retry;
}
@@ -146,30 +86,31 @@
* Do DAT for user address by page table walk, return kernel address.
* This function needs to be called with current->mm->page_table_lock held.
*/
-static unsigned long __dat_user_addr(unsigned long uaddr)
+static __always_inline unsigned long __dat_user_addr(unsigned long uaddr)
{
struct mm_struct *mm = current->mm;
- unsigned long pfn, ret;
+ unsigned long pfn;
pte_t *pte;
int rc;
- ret = 0;
retry:
pte = follow_table(mm, uaddr);
- if (!pte || !pte_present(*pte))
+ if ((unsigned long) pte < 0x1000)
goto fault;
+ if (!pte_present(*pte)) {
+ pte = (pte_t *) 0x11;
+ goto fault;
+ }
pfn = pte_pfn(*pte);
- ret = (pfn << PAGE_SHIFT) + (uaddr & (PAGE_SIZE - 1));
-out:
- return ret;
+ return (pfn << PAGE_SHIFT) + (uaddr & (PAGE_SIZE - 1));
fault:
spin_unlock(&mm->page_table_lock);
- rc = __handle_fault(mm, uaddr, 0);
+ rc = __handle_fault(uaddr, (unsigned long) pte, 0);
spin_lock(&mm->page_table_lock);
- if (rc)
- goto out;
- goto retry;
+ if (!rc)
+ goto retry;
+ return 0;
}
size_t copy_from_user_pt(size_t n, const void __user *from, void *to)
@@ -234,8 +175,12 @@
spin_lock(&mm->page_table_lock);
do {
pte = follow_table(mm, uaddr);
- if (!pte || !pte_present(*pte))
+ if ((unsigned long) pte < 0x1000)
goto fault;
+ if (!pte_present(*pte)) {
+ pte = (pte_t *) 0x11;
+ goto fault;
+ }
pfn = pte_pfn(*pte);
offset = uaddr & (PAGE_SIZE-1);
@@ -249,9 +194,8 @@
return done + 1;
fault:
spin_unlock(&mm->page_table_lock);
- if (__handle_fault(mm, uaddr, 0)) {
+ if (__handle_fault(uaddr, (unsigned long) pte, 0))
return 0;
- }
goto retry;
}
@@ -284,7 +228,7 @@
{
struct mm_struct *mm = current->mm;
unsigned long offset_from, offset_to, offset_max, pfn_from, pfn_to,
- uaddr, done, size;
+ uaddr, done, size, error_code;
unsigned long uaddr_from = (unsigned long) from;
unsigned long uaddr_to = (unsigned long) to;
pte_t *pte_from, *pte_to;
@@ -298,17 +242,28 @@
retry:
spin_lock(&mm->page_table_lock);
do {
+ write_user = 0;
+ uaddr = uaddr_from;
pte_from = follow_table(mm, uaddr_from);
- if (!pte_from || !pte_present(*pte_from)) {
- uaddr = uaddr_from;
- write_user = 0;
+ error_code = (unsigned long) pte_from;
+ if (error_code < 0x1000)
+ goto fault;
+ if (!pte_present(*pte_from)) {
+ error_code = 0x11;
goto fault;
}
+ write_user = 1;
+ uaddr = uaddr_to;
pte_to = follow_table(mm, uaddr_to);
- if (!pte_to || !pte_present(*pte_to) || !pte_write(*pte_to)) {
- uaddr = uaddr_to;
- write_user = 1;
+ error_code = (unsigned long) pte_to;
+ if (error_code < 0x1000)
+ goto fault;
+ if (!pte_present(*pte_to)) {
+ error_code = 0x11;
+ goto fault;
+ } else if (!pte_write(*pte_to)) {
+ error_code = 0x04;
goto fault;
}
@@ -329,7 +284,7 @@
return n - done;
fault:
spin_unlock(&mm->page_table_lock);
- if (__handle_fault(mm, uaddr, write_user))
+ if (__handle_fault(uaddr, error_code, write_user))
return n - done;
goto retry;
}
diff --git a/arch/s390/math-emu/math.c b/arch/s390/math-emu/math.c
index 3ee78cc..cd4e9c1 100644
--- a/arch/s390/math-emu/math.c
+++ b/arch/s390/math-emu/math.c
@@ -2088,7 +2088,7 @@
__u16 opc = *((__u16 *) opcode);
if ((opc & 0x90) == 0) { /* test if rx in {0,2,4,6} */
- /* we got an exception therfore ry can't be in {0,2,4,6} */
+ /* we got an exception therefore ry can't be in {0,2,4,6} */
asm volatile( /* load rx from fp_regs.fprs[ry] */
" bras 1,0f\n"
" ld 0,0(%1)\n"
@@ -2118,7 +2118,7 @@
__u16 opc = *((__u16 *) opcode);
if ((opc & 0x90) == 0) { /* test if rx in {0,2,4,6} */
- /* we got an exception therfore ry can't be in {0,2,4,6} */
+ /* we got an exception therefore ry can't be in {0,2,4,6} */
asm volatile( /* load rx from fp_regs.fprs[ry] */
" bras 1,0f\n"
" le 0,0(%1)\n"
diff --git a/arch/s390/mm/cmm.c b/arch/s390/mm/cmm.c
index ff58779..76a3637 100644
--- a/arch/s390/mm/cmm.c
+++ b/arch/s390/mm/cmm.c
@@ -18,6 +18,7 @@
#include <linux/swap.h>
#include <linux/kthread.h>
#include <linux/oom.h>
+#include <linux/suspend.h>
#include <asm/pgalloc.h>
#include <asm/uaccess.h>
@@ -44,6 +45,7 @@
static volatile long cmm_timed_pages_target;
static long cmm_timeout_pages;
static long cmm_timeout_seconds;
+static int cmm_suspended;
static struct cmm_page_array *cmm_page_list;
static struct cmm_page_array *cmm_timed_page_list;
@@ -147,9 +149,9 @@
while (1) {
rc = wait_event_interruptible(cmm_thread_wait,
- (cmm_pages != cmm_pages_target ||
- cmm_timed_pages != cmm_timed_pages_target ||
- kthread_should_stop()));
+ (!cmm_suspended && (cmm_pages != cmm_pages_target ||
+ cmm_timed_pages != cmm_timed_pages_target)) ||
+ kthread_should_stop());
if (kthread_should_stop() || rc == -ERESTARTSYS) {
cmm_pages_target = cmm_pages;
cmm_timed_pages_target = cmm_timed_pages;
@@ -410,6 +412,38 @@
static struct ctl_table_header *cmm_sysctl_header;
+static int cmm_suspend(void)
+{
+ cmm_suspended = 1;
+ cmm_free_pages(cmm_pages, &cmm_pages, &cmm_page_list);
+ cmm_free_pages(cmm_timed_pages, &cmm_timed_pages, &cmm_timed_page_list);
+ return 0;
+}
+
+static int cmm_resume(void)
+{
+ cmm_suspended = 0;
+ cmm_kick_thread();
+ return 0;
+}
+
+static int cmm_power_event(struct notifier_block *this,
+ unsigned long event, void *ptr)
+{
+ switch (event) {
+ case PM_POST_HIBERNATION:
+ return cmm_resume();
+ case PM_HIBERNATION_PREPARE:
+ return cmm_suspend();
+ default:
+ return NOTIFY_DONE;
+ }
+}
+
+static struct notifier_block cmm_power_notifier = {
+ .notifier_call = cmm_power_event,
+};
+
static int
cmm_init (void)
{
@@ -418,7 +452,7 @@
#ifdef CONFIG_CMM_PROC
cmm_sysctl_header = register_sysctl_table(cmm_dir_table);
if (!cmm_sysctl_header)
- goto out;
+ goto out_sysctl;
#endif
#ifdef CONFIG_CMM_IUCV
rc = smsg_register_callback(SMSG_PREFIX, cmm_smsg_target);
@@ -428,17 +462,21 @@
rc = register_oom_notifier(&cmm_oom_nb);
if (rc < 0)
goto out_oom_notify;
+ rc = register_pm_notifier(&cmm_power_notifier);
+ if (rc)
+ goto out_pm;
init_waitqueue_head(&cmm_thread_wait);
init_timer(&cmm_timer);
cmm_thread_ptr = kthread_run(cmm_thread, NULL, "cmmthread");
rc = IS_ERR(cmm_thread_ptr) ? PTR_ERR(cmm_thread_ptr) : 0;
- if (!rc)
- goto out;
- /*
- * kthread_create failed. undo all the stuff from above again.
- */
- unregister_oom_notifier(&cmm_oom_nb);
+ if (rc)
+ goto out_kthread;
+ return 0;
+out_kthread:
+ unregister_pm_notifier(&cmm_power_notifier);
+out_pm:
+ unregister_oom_notifier(&cmm_oom_nb);
out_oom_notify:
#ifdef CONFIG_CMM_IUCV
smsg_unregister_callback(SMSG_PREFIX, cmm_smsg_target);
@@ -446,8 +484,8 @@
#endif
#ifdef CONFIG_CMM_PROC
unregister_sysctl_table(cmm_sysctl_header);
+out_sysctl:
#endif
-out:
return rc;
}
@@ -455,6 +493,7 @@
cmm_exit(void)
{
kthread_stop(cmm_thread_ptr);
+ unregister_pm_notifier(&cmm_power_notifier);
unregister_oom_notifier(&cmm_oom_nb);
cmm_free_pages(cmm_pages, &cmm_pages, &cmm_page_list);
cmm_free_pages(cmm_timed_pages, &cmm_timed_pages, &cmm_timed_page_list);
diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c
index 6d50746..fc102e7 100644
--- a/arch/s390/mm/fault.c
+++ b/arch/s390/mm/fault.c
@@ -34,16 +34,15 @@
#include <asm/pgtable.h>
#include <asm/s390_ext.h>
#include <asm/mmu_context.h>
+#include <asm/compat.h>
#include "../kernel/entry.h"
#ifndef CONFIG_64BIT
#define __FAIL_ADDR_MASK 0x7ffff000
-#define __FIXUP_MASK 0x7fffffff
#define __SUBCODE_MASK 0x0200
#define __PF_RES_FIELD 0ULL
#else /* CONFIG_64BIT */
#define __FAIL_ADDR_MASK -4096L
-#define __FIXUP_MASK ~0L
#define __SUBCODE_MASK 0x0600
#define __PF_RES_FIELD 0x8000000000000000ULL
#endif /* CONFIG_64BIT */
@@ -52,11 +51,15 @@
extern int sysctl_userprocess_debug;
#endif
-#ifdef CONFIG_KPROBES
-static inline int notify_page_fault(struct pt_regs *regs, long err)
+#define VM_FAULT_BADCONTEXT 0x010000
+#define VM_FAULT_BADMAP 0x020000
+#define VM_FAULT_BADACCESS 0x040000
+
+static inline int notify_page_fault(struct pt_regs *regs)
{
int ret = 0;
+#ifdef CONFIG_KPROBES
/* kprobe_running() needs smp_processor_id() */
if (!user_mode(regs)) {
preempt_disable();
@@ -64,15 +67,9 @@
ret = 1;
preempt_enable();
}
-
+#endif
return ret;
}
-#else
-static inline int notify_page_fault(struct pt_regs *regs, long err)
-{
- return 0;
-}
-#endif
/*
@@ -100,57 +97,50 @@
/*
* Returns the address space associated with the fault.
- * Returns 0 for kernel space, 1 for user space and
- * 2 for code execution in user space with noexec=on.
+ * Returns 0 for kernel space and 1 for user space.
*/
-static inline int check_space(struct task_struct *tsk)
+static inline int user_space_fault(unsigned long trans_exc_code)
{
/*
- * The lowest two bits of S390_lowcore.trans_exc_code
- * indicate which paging table was used.
+ * The lowest two bits of the translation exception
+ * identification indicate which paging table was used.
*/
- int desc = S390_lowcore.trans_exc_code & 3;
-
- if (desc == 3) /* Home Segment Table Descriptor */
- return switch_amode == 0;
- if (desc == 2) /* Secondary Segment Table Descriptor */
- return tsk->thread.mm_segment.ar4;
-#ifdef CONFIG_S390_SWITCH_AMODE
- if (unlikely(desc == 1)) { /* STD determined via access register */
- /* %a0 always indicates primary space. */
- if (S390_lowcore.exc_access_id != 0) {
- save_access_regs(tsk->thread.acrs);
- /*
- * An alet of 0 indicates primary space.
- * An alet of 1 indicates secondary space.
- * Any other alet values generate an
- * alen-translation exception.
- */
- if (tsk->thread.acrs[S390_lowcore.exc_access_id])
- return tsk->thread.mm_segment.ar4;
- }
- }
-#endif
- /* Primary Segment Table Descriptor */
- return switch_amode << s390_noexec;
+ trans_exc_code &= 3;
+ if (trans_exc_code == 2)
+ /* Access via secondary space, set_fs setting decides */
+ return current->thread.mm_segment.ar4;
+ if (user_mode == HOME_SPACE_MODE)
+ /* User space if the access has been done via home space. */
+ return trans_exc_code == 3;
+ /*
+ * If the user space is not the home space the kernel runs in home
+ * space. Access via secondary space has already been covered,
+ * access via primary space or access register is from user space
+ * and access via home space is from the kernel.
+ */
+ return trans_exc_code != 3;
}
/*
* Send SIGSEGV to task. This is an external routine
* to keep the stack usage of do_page_fault small.
*/
-static void do_sigsegv(struct pt_regs *regs, unsigned long error_code,
- int si_code, unsigned long address)
+static noinline void do_sigsegv(struct pt_regs *regs, long int_code,
+ int si_code, unsigned long trans_exc_code)
{
struct siginfo si;
+ unsigned long address;
+ address = trans_exc_code & __FAIL_ADDR_MASK;
+ current->thread.prot_addr = address;
+ current->thread.trap_no = int_code;
#if defined(CONFIG_SYSCTL) || defined(CONFIG_PROCESS_DEBUG)
#if defined(CONFIG_SYSCTL)
if (sysctl_userprocess_debug)
#endif
{
printk("User process fault: interruption code 0x%lX\n",
- error_code);
+ int_code);
printk("failing address: %lX\n", address);
show_regs(regs);
}
@@ -161,13 +151,14 @@
force_sig_info(SIGSEGV, &si, current);
}
-static void do_no_context(struct pt_regs *regs, unsigned long error_code,
- unsigned long address)
+static noinline void do_no_context(struct pt_regs *regs, long int_code,
+ unsigned long trans_exc_code)
{
const struct exception_table_entry *fixup;
+ unsigned long address;
/* Are we prepared to handle this kernel fault? */
- fixup = search_exception_tables(regs->psw.addr & __FIXUP_MASK);
+ fixup = search_exception_tables(regs->psw.addr & PSW_ADDR_INSN);
if (fixup) {
regs->psw.addr = fixup->fixup | PSW_ADDR_AMODE;
return;
@@ -177,129 +168,149 @@
* Oops. The kernel tried to access some bad page. We'll have to
* terminate things with extreme prejudice.
*/
- if (check_space(current) == 0)
+ address = trans_exc_code & __FAIL_ADDR_MASK;
+ if (!user_space_fault(trans_exc_code))
printk(KERN_ALERT "Unable to handle kernel pointer dereference"
" at virtual kernel address %p\n", (void *)address);
else
printk(KERN_ALERT "Unable to handle kernel paging request"
" at virtual user address %p\n", (void *)address);
- die("Oops", regs, error_code);
+ die("Oops", regs, int_code);
do_exit(SIGKILL);
}
-static void do_low_address(struct pt_regs *regs, unsigned long error_code)
+static noinline void do_low_address(struct pt_regs *regs, long int_code,
+ unsigned long trans_exc_code)
{
/* Low-address protection hit in kernel mode means
NULL pointer write access in kernel mode. */
if (regs->psw.mask & PSW_MASK_PSTATE) {
/* Low-address protection hit in user mode 'cannot happen'. */
- die ("Low-address protection", regs, error_code);
+ die ("Low-address protection", regs, int_code);
do_exit(SIGKILL);
}
- do_no_context(regs, error_code, 0);
+ do_no_context(regs, int_code, trans_exc_code);
}
-static void do_sigbus(struct pt_regs *regs, unsigned long error_code,
- unsigned long address)
+static noinline void do_sigbus(struct pt_regs *regs, long int_code,
+ unsigned long trans_exc_code)
{
struct task_struct *tsk = current;
- struct mm_struct *mm = tsk->mm;
- up_read(&mm->mmap_sem);
/*
* Send a sigbus, regardless of whether we were in kernel
* or user mode.
*/
- tsk->thread.prot_addr = address;
- tsk->thread.trap_no = error_code;
+ tsk->thread.prot_addr = trans_exc_code & __FAIL_ADDR_MASK;
+ tsk->thread.trap_no = int_code;
force_sig(SIGBUS, tsk);
-
- /* Kernel mode? Handle exceptions or die */
- if (!(regs->psw.mask & PSW_MASK_PSTATE))
- do_no_context(regs, error_code, address);
}
#ifdef CONFIG_S390_EXEC_PROTECT
-static int signal_return(struct mm_struct *mm, struct pt_regs *regs,
- unsigned long address, unsigned long error_code)
+static noinline int signal_return(struct pt_regs *regs, long int_code,
+ unsigned long trans_exc_code)
{
u16 instruction;
int rc;
-#ifdef CONFIG_COMPAT
- int compat;
-#endif
- pagefault_disable();
rc = __get_user(instruction, (u16 __user *) regs->psw.addr);
- pagefault_enable();
- if (rc)
- return -EFAULT;
- up_read(&mm->mmap_sem);
- clear_tsk_thread_flag(current, TIF_SINGLE_STEP);
-#ifdef CONFIG_COMPAT
- compat = is_compat_task();
- if (compat && instruction == 0x0a77)
- sys32_sigreturn();
- else if (compat && instruction == 0x0aad)
- sys32_rt_sigreturn();
- else
-#endif
- if (instruction == 0x0a77)
- sys_sigreturn();
- else if (instruction == 0x0aad)
- sys_rt_sigreturn();
- else {
- current->thread.prot_addr = address;
- current->thread.trap_no = error_code;
- do_sigsegv(regs, error_code, SEGV_MAPERR, address);
- }
+ if (!rc && instruction == 0x0a77) {
+ clear_tsk_thread_flag(current, TIF_SINGLE_STEP);
+ if (is_compat_task())
+ sys32_sigreturn();
+ else
+ sys_sigreturn();
+ } else if (!rc && instruction == 0x0aad) {
+ clear_tsk_thread_flag(current, TIF_SINGLE_STEP);
+ if (is_compat_task())
+ sys32_rt_sigreturn();
+ else
+ sys_rt_sigreturn();
+ } else
+ do_sigsegv(regs, int_code, SEGV_MAPERR, trans_exc_code);
return 0;
}
#endif /* CONFIG_S390_EXEC_PROTECT */
+static noinline void do_fault_error(struct pt_regs *regs, long int_code,
+ unsigned long trans_exc_code, int fault)
+{
+ int si_code;
+
+ switch (fault) {
+ case VM_FAULT_BADACCESS:
+#ifdef CONFIG_S390_EXEC_PROTECT
+ if ((regs->psw.mask & PSW_MASK_ASC) == PSW_ASC_SECONDARY &&
+ (trans_exc_code & 3) == 0) {
+ signal_return(regs, int_code, trans_exc_code);
+ break;
+ }
+#endif /* CONFIG_S390_EXEC_PROTECT */
+ case VM_FAULT_BADMAP:
+ /* Bad memory access. Check if it is kernel or user space. */
+ if (regs->psw.mask & PSW_MASK_PSTATE) {
+ /* User mode accesses just cause a SIGSEGV */
+ si_code = (fault == VM_FAULT_BADMAP) ?
+ SEGV_MAPERR : SEGV_ACCERR;
+ do_sigsegv(regs, int_code, si_code, trans_exc_code);
+ return;
+ }
+ case VM_FAULT_BADCONTEXT:
+ do_no_context(regs, int_code, trans_exc_code);
+ break;
+ default: /* fault & VM_FAULT_ERROR */
+ if (fault & VM_FAULT_OOM)
+ pagefault_out_of_memory();
+ else if (fault & VM_FAULT_SIGBUS) {
+ do_sigbus(regs, int_code, trans_exc_code);
+ /* Kernel mode? Handle exceptions or die */
+ if (!(regs->psw.mask & PSW_MASK_PSTATE))
+ do_no_context(regs, int_code, trans_exc_code);
+ } else
+ BUG();
+ break;
+ }
+}
+
/*
* This routine handles page faults. It determines the address,
* and the problem, and then passes it off to one of the appropriate
* routines.
*
- * error_code:
+ * interruption code (int_code):
* 04 Protection -> Write-Protection (suprression)
* 10 Segment translation -> Not present (nullification)
* 11 Page translation -> Not present (nullification)
* 3b Region third trans. -> Not present (nullification)
*/
-static inline void
-do_exception(struct pt_regs *regs, unsigned long error_code, int write)
+static inline int do_exception(struct pt_regs *regs, int access,
+ unsigned long trans_exc_code)
{
struct task_struct *tsk;
struct mm_struct *mm;
struct vm_area_struct *vma;
unsigned long address;
- int space;
- int si_code;
int fault;
- if (notify_page_fault(regs, error_code))
- return;
+ if (notify_page_fault(regs))
+ return 0;
tsk = current;
mm = tsk->mm;
- /* get the failing address and the affected space */
- address = S390_lowcore.trans_exc_code & __FAIL_ADDR_MASK;
- space = check_space(tsk);
-
/*
* Verify that the fault happened in user space, that
* we are not in an interrupt and that there is a
* user context.
*/
- if (unlikely(space == 0 || in_atomic() || !mm))
- goto no_context;
+ fault = VM_FAULT_BADCONTEXT;
+ if (unlikely(!user_space_fault(trans_exc_code) || in_atomic() || !mm))
+ goto out;
+ address = trans_exc_code & __FAIL_ADDR_MASK;
/*
* When we get here, the fault happened in the current
* task's user address space, so we can switch on the
@@ -309,42 +320,26 @@
perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, 0, regs, address);
down_read(&mm->mmap_sem);
- si_code = SEGV_MAPERR;
+ fault = VM_FAULT_BADMAP;
vma = find_vma(mm, address);
if (!vma)
- goto bad_area;
+ goto out_up;
-#ifdef CONFIG_S390_EXEC_PROTECT
- if (unlikely((space == 2) && !(vma->vm_flags & VM_EXEC)))
- if (!signal_return(mm, regs, address, error_code))
- /*
- * signal_return() has done an up_read(&mm->mmap_sem)
- * if it returns 0.
- */
- return;
-#endif
-
- if (vma->vm_start <= address)
- goto good_area;
- if (!(vma->vm_flags & VM_GROWSDOWN))
- goto bad_area;
- if (expand_stack(vma, address))
- goto bad_area;
-/*
- * Ok, we have a good vm_area for this memory access, so
- * we can handle it..
- */
-good_area:
- si_code = SEGV_ACCERR;
- if (!write) {
- /* page not present, check vm flags */
- if (!(vma->vm_flags & (VM_READ | VM_EXEC | VM_WRITE)))
- goto bad_area;
- } else {
- if (!(vma->vm_flags & VM_WRITE))
- goto bad_area;
+ if (unlikely(vma->vm_start > address)) {
+ if (!(vma->vm_flags & VM_GROWSDOWN))
+ goto out_up;
+ if (expand_stack(vma, address))
+ goto out_up;
}
+ /*
+ * Ok, we have a good vm_area for this memory access, so
+ * we can handle it..
+ */
+ fault = VM_FAULT_BADACCESS;
+ if (unlikely(!(vma->vm_flags & access)))
+ goto out_up;
+
if (is_vm_hugetlb_page(vma))
address &= HPAGE_MASK;
/*
@@ -352,18 +347,11 @@
* make sure we exit gracefully rather than endlessly redo
* the fault.
*/
- fault = handle_mm_fault(mm, vma, address, write ? FAULT_FLAG_WRITE : 0);
- if (unlikely(fault & VM_FAULT_ERROR)) {
- if (fault & VM_FAULT_OOM) {
- up_read(&mm->mmap_sem);
- pagefault_out_of_memory();
- return;
- } else if (fault & VM_FAULT_SIGBUS) {
- do_sigbus(regs, error_code, address);
- return;
- }
- BUG();
- }
+ fault = handle_mm_fault(mm, vma, address,
+ (access == VM_WRITE) ? FAULT_FLAG_WRITE : 0);
+ if (unlikely(fault & VM_FAULT_ERROR))
+ goto out_up;
+
if (fault & VM_FAULT_MAJOR) {
tsk->maj_flt++;
perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, 0,
@@ -373,74 +361,69 @@
perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, 0,
regs, address);
}
- up_read(&mm->mmap_sem);
/*
* The instruction that caused the program check will
* be repeated. Don't signal single step via SIGTRAP.
*/
clear_tsk_thread_flag(tsk, TIF_SINGLE_STEP);
- return;
-
-/*
- * Something tried to access memory that isn't in our memory map..
- * Fix it, but check if it's kernel or user first..
- */
-bad_area:
+ fault = 0;
+out_up:
up_read(&mm->mmap_sem);
-
- /* User mode accesses just cause a SIGSEGV */
- if (regs->psw.mask & PSW_MASK_PSTATE) {
- tsk->thread.prot_addr = address;
- tsk->thread.trap_no = error_code;
- do_sigsegv(regs, error_code, si_code, address);
- return;
- }
-
-no_context:
- do_no_context(regs, error_code, address);
+out:
+ return fault;
}
-void __kprobes do_protection_exception(struct pt_regs *regs,
- long error_code)
+void __kprobes do_protection_exception(struct pt_regs *regs, long int_code)
{
+ unsigned long trans_exc_code = S390_lowcore.trans_exc_code;
+ int fault;
+
/* Protection exception is supressing, decrement psw address. */
- regs->psw.addr -= (error_code >> 16);
+ regs->psw.addr -= (int_code >> 16);
/*
* Check for low-address protection. This needs to be treated
* as a special case because the translation exception code
* field is not guaranteed to contain valid data in this case.
*/
- if (unlikely(!(S390_lowcore.trans_exc_code & 4))) {
- do_low_address(regs, error_code);
+ if (unlikely(!(trans_exc_code & 4))) {
+ do_low_address(regs, int_code, trans_exc_code);
return;
}
- do_exception(regs, 4, 1);
+ fault = do_exception(regs, VM_WRITE, trans_exc_code);
+ if (unlikely(fault))
+ do_fault_error(regs, 4, trans_exc_code, fault);
}
-void __kprobes do_dat_exception(struct pt_regs *regs, long error_code)
+void __kprobes do_dat_exception(struct pt_regs *regs, long int_code)
{
- do_exception(regs, error_code & 0xff, 0);
+ unsigned long trans_exc_code = S390_lowcore.trans_exc_code;
+ int access, fault;
+
+ access = VM_READ | VM_EXEC | VM_WRITE;
+#ifdef CONFIG_S390_EXEC_PROTECT
+ if ((regs->psw.mask & PSW_MASK_ASC) == PSW_ASC_SECONDARY &&
+ (trans_exc_code & 3) == 0)
+ access = VM_EXEC;
+#endif
+ fault = do_exception(regs, access, trans_exc_code);
+ if (unlikely(fault))
+ do_fault_error(regs, int_code & 255, trans_exc_code, fault);
}
#ifdef CONFIG_64BIT
-void __kprobes do_asce_exception(struct pt_regs *regs, unsigned long error_code)
+void __kprobes do_asce_exception(struct pt_regs *regs, long int_code)
{
- struct mm_struct *mm;
+ unsigned long trans_exc_code = S390_lowcore.trans_exc_code;
+ struct mm_struct *mm = current->mm;
struct vm_area_struct *vma;
- unsigned long address;
- int space;
- mm = current->mm;
- address = S390_lowcore.trans_exc_code & __FAIL_ADDR_MASK;
- space = check_space(current);
-
- if (unlikely(space == 0 || in_atomic() || !mm))
+ if (unlikely(!user_space_fault(trans_exc_code) || in_atomic() || !mm))
goto no_context;
local_irq_enable();
down_read(&mm->mmap_sem);
- vma = find_vma(mm, address);
+ vma = find_vma(mm, trans_exc_code & __FAIL_ADDR_MASK);
up_read(&mm->mmap_sem);
if (vma) {
@@ -450,17 +433,38 @@
/* User mode accesses just cause a SIGSEGV */
if (regs->psw.mask & PSW_MASK_PSTATE) {
- current->thread.prot_addr = address;
- current->thread.trap_no = error_code;
- do_sigsegv(regs, error_code, SEGV_MAPERR, address);
+ do_sigsegv(regs, int_code, SEGV_MAPERR, trans_exc_code);
return;
}
no_context:
- do_no_context(regs, error_code, address);
+ do_no_context(regs, int_code, trans_exc_code);
}
#endif
+int __handle_fault(unsigned long uaddr, unsigned long int_code, int write_user)
+{
+ struct pt_regs regs;
+ int access, fault;
+
+ regs.psw.mask = psw_kernel_bits;
+ if (!irqs_disabled())
+ regs.psw.mask |= PSW_MASK_IO | PSW_MASK_EXT;
+ regs.psw.addr = (unsigned long) __builtin_return_address(0);
+ regs.psw.addr |= PSW_ADDR_AMODE;
+ uaddr &= PAGE_MASK;
+ access = write_user ? VM_WRITE : VM_READ;
+ fault = do_exception(®s, access, uaddr | 2);
+ if (unlikely(fault)) {
+ if (fault & VM_FAULT_OOM) {
+ pagefault_out_of_memory();
+ fault = 0;
+ } else if (fault & VM_FAULT_SIGBUS)
+ do_sigbus(®s, int_code, uaddr);
+ }
+ return fault ? -EFAULT : 0;
+}
+
#ifdef CONFIG_PFAULT
/*
* 'pfault' pseudo page faults routines.
@@ -522,7 +526,7 @@
: : "a" (&refbk), "m" (refbk) : "cc");
}
-static void pfault_interrupt(__u16 error_code)
+static void pfault_interrupt(__u16 int_code)
{
struct task_struct *tsk;
__u16 subcode;
diff --git a/arch/s390/mm/pgtable.c b/arch/s390/mm/pgtable.c
index 2757c56..ad621e0 100644
--- a/arch/s390/mm/pgtable.c
+++ b/arch/s390/mm/pgtable.c
@@ -269,7 +269,7 @@
struct mm_struct *mm, *old_mm;
/* Do we have switched amode? If no, we cannot do sie */
- if (!switch_amode)
+ if (user_mode == HOME_SPACE_MODE)
return -EINVAL;
/* Do we have pgstes? if yes, we are done */
diff --git a/arch/s390/mm/vmem.c b/arch/s390/mm/vmem.c
index 5f91a38..300ab01 100644
--- a/arch/s390/mm/vmem.c
+++ b/arch/s390/mm/vmem.c
@@ -70,8 +70,12 @@
pte = alloc_bootmem(PTRS_PER_PTE * sizeof(pte_t));
if (!pte)
return NULL;
- clear_table((unsigned long *) pte, _PAGE_TYPE_EMPTY,
- PTRS_PER_PTE * sizeof(pte_t));
+ if (MACHINE_HAS_HPAGE)
+ clear_table((unsigned long *) pte, _PAGE_TYPE_EMPTY | _PAGE_CO,
+ PTRS_PER_PTE * sizeof(pte_t));
+ else
+ clear_table((unsigned long *) pte, _PAGE_TYPE_EMPTY,
+ PTRS_PER_PTE * sizeof(pte_t));
return pte;
}
@@ -112,7 +116,8 @@
if (MACHINE_HAS_HPAGE && !(address & ~HPAGE_MASK) &&
(address + HPAGE_SIZE <= start + size) &&
(address >= HPAGE_SIZE)) {
- pte_val(pte) |= _SEGMENT_ENTRY_LARGE;
+ pte_val(pte) |= _SEGMENT_ENTRY_LARGE |
+ _SEGMENT_ENTRY_CO;
pmd_val(*pm_dir) = pte_val(pte);
address += HPAGE_SIZE - PAGE_SIZE;
continue;
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 88cdeb9..0031a69 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -16,7 +16,9 @@
select HAVE_IOREMAP_PROT if MMU
select HAVE_ARCH_TRACEHOOK
select HAVE_DMA_API_DEBUG
+ select HAVE_DMA_ATTRS
select HAVE_PERF_EVENTS
+ select PERF_USE_VMALLOC
select HAVE_KERNEL_GZIP
select HAVE_KERNEL_BZIP2
select HAVE_KERNEL_LZMA
@@ -37,6 +39,7 @@
select HAVE_FTRACE_MCOUNT_RECORD
select HAVE_DYNAMIC_FTRACE
select HAVE_FUNCTION_TRACE_MCOUNT_TEST
+ select HAVE_FTRACE_NMI_ENTER if DYNAMIC_FTRACE
select HAVE_FUNCTION_GRAPH_TRACER
select HAVE_ARCH_KGDB
select ARCH_HIBERNATION_POSSIBLE if MMU
@@ -170,6 +173,12 @@
config IO_TRAPPED
bool
+config DMA_COHERENT
+ bool
+
+config DMA_NONCOHERENT
+ def_bool !DMA_COHERENT
+
source "init/Kconfig"
source "kernel/Kconfig.freezer"
@@ -220,6 +229,7 @@
config CPU_SHX3
bool
+ select DMA_COHERENT
config ARCH_SHMOBILE
bool
@@ -761,17 +771,6 @@
default "0x00010000" if PAGE_SIZE_64KB
default "0x00000000"
-config UBC_WAKEUP
- bool "Wakeup UBC on startup"
- depends on CPU_SH4 && !CPU_SH4A
- help
- Selecting this option will wakeup the User Break Controller (UBC) on
- startup. Although the UBC is left in an awake state when the processor
- comes up, some boot loaders misbehave by putting the UBC to sleep in a
- power saving state, which causes issues with things like ptrace().
-
- If unsure, say N.
-
choice
prompt "Kernel command line"
optional
@@ -818,7 +817,13 @@
Dreamcast with a serial line terminal or a remote network
connection.
-source "arch/sh/drivers/pci/Kconfig"
+config PCI
+ bool "PCI support"
+ depends on SYS_SUPPORTS_PCI
+ help
+ Find out whether you have a PCI motherboard. PCI is the name of a
+ bus system, i.e. the way the CPU talks to the other stuff inside
+ your box. If you have PCI, say Y, otherwise N.
source "drivers/pci/pcie/Kconfig"
diff --git a/arch/sh/Makefile b/arch/sh/Makefile
index 66e40aa..ac17c5a 100644
--- a/arch/sh/Makefile
+++ b/arch/sh/Makefile
@@ -78,6 +78,9 @@
defaultimage-$(CONFIG_SH_SH7785LCR) := uImage
defaultimage-$(CONFIG_SH_RSK) := uImage
defaultimage-$(CONFIG_SH_URQUELL) := uImage
+defaultimage-$(CONFIG_SH_MIGOR) := uImage
+defaultimage-$(CONFIG_SH_AP325RXA) := uImage
+defaultimage-$(CONFIG_SH_7724_SOLUTION_ENGINE) := uImage
defaultimage-$(CONFIG_SH_7206_SOLUTION_ENGINE) := vmlinux
defaultimage-$(CONFIG_SH_7619_SOLUTION_ENGINE) := vmlinux
@@ -136,6 +139,7 @@
machdir-$(CONFIG_SH_EDOSK7705) += mach-edosk7705
machdir-$(CONFIG_SH_HIGHLANDER) += mach-highlander
machdir-$(CONFIG_SH_MIGOR) += mach-migor
+machdir-$(CONFIG_SH_AP325RXA) += mach-ap325rxa
machdir-$(CONFIG_SH_KFR2R09) += mach-kfr2r09
machdir-$(CONFIG_SH_ECOVEC) += mach-ecovec24
machdir-$(CONFIG_SH_SDK7780) += mach-sdk7780
diff --git a/arch/sh/boards/Makefile b/arch/sh/boards/Makefile
index 7baa210..ce0f263 100644
--- a/arch/sh/boards/Makefile
+++ b/arch/sh/boards/Makefile
@@ -1,7 +1,6 @@
#
# Specific board support, not covered by a mach group.
#
-obj-$(CONFIG_SH_AP325RXA) += board-ap325rxa.o
obj-$(CONFIG_SH_MAGIC_PANEL_R2) += board-magicpanelr2.o
obj-$(CONFIG_SH_SH7785LCR) += board-sh7785lcr.o
obj-$(CONFIG_SH_URQUELL) += board-urquell.o
diff --git a/arch/sh/boards/mach-ap325rxa/Makefile b/arch/sh/boards/mach-ap325rxa/Makefile
new file mode 100644
index 0000000..4cf1774
--- /dev/null
+++ b/arch/sh/boards/mach-ap325rxa/Makefile
@@ -0,0 +1,2 @@
+obj-y := setup.o sdram.o
+
diff --git a/arch/sh/boards/mach-ap325rxa/sdram.S b/arch/sh/boards/mach-ap325rxa/sdram.S
new file mode 100644
index 0000000..db24fbe
--- /dev/null
+++ b/arch/sh/boards/mach-ap325rxa/sdram.S
@@ -0,0 +1,69 @@
+/*
+ * AP325RXA sdram self/auto-refresh setup code
+ *
+ * Copyright (C) 2009 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/sys.h>
+#include <linux/errno.h>
+#include <linux/linkage.h>
+#include <asm/asm-offsets.h>
+#include <asm/suspend.h>
+#include <asm/romimage-macros.h>
+
+/* code to enter and leave self-refresh. must be self-contained.
+ * this code will be copied to on-chip memory and executed from there.
+ */
+ .balign 4
+ENTRY(ap325rxa_sdram_enter_start)
+
+ /* SBSC: disable power down and put in self-refresh mode */
+ mov.l 1f, r4
+ mov.l 2f, r1
+ mov.l @r4, r2
+ or r1, r2
+ mov.l 3f, r3
+ and r3, r2
+ mov.l r2, @r4
+
+ rts
+ nop
+
+ .balign 4
+1: .long 0xfe400008 /* SDCR0 */
+2: .long 0x00000400
+3: .long 0xffff7fff
+ENTRY(ap325rxa_sdram_enter_end)
+
+ .balign 4
+ENTRY(ap325rxa_sdram_leave_start)
+
+ /* SBSC: set auto-refresh mode */
+ mov.l 1f, r4
+ mov.l @r4, r0
+ mov.l 4f, r1
+ and r1, r0
+ mov.l r0, @r4
+ mov.l 6f, r4
+ mov.l 8f, r0
+ mov.l @r4, r1
+ mov #-1, r4
+ add r4, r1
+ or r1, r0
+ mov.l 7f, r1
+ mov.l r0, @r1
+
+ rts
+ nop
+
+ .balign 4
+1: .long 0xfe400008 /* SDCR0 */
+4: .long 0xfffffbff
+6: .long 0xfe40001c /* RTCOR */
+7: .long 0xfe400018 /* RTCNT */
+8: .long 0xa55a0000
+ENTRY(ap325rxa_sdram_leave_end)
diff --git a/arch/sh/boards/board-ap325rxa.c b/arch/sh/boards/mach-ap325rxa/setup.c
similarity index 86%
rename from arch/sh/boards/board-ap325rxa.c
rename to arch/sh/boards/mach-ap325rxa/setup.c
index 2d08073..cf9dc12 100644
--- a/arch/sh/boards/board-ap325rxa.c
+++ b/arch/sh/boards/mach-ap325rxa/setup.c
@@ -20,8 +20,6 @@
#include <linux/i2c.h>
#include <linux/smsc911x.h>
#include <linux/gpio.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/spi_gpio.h>
#include <media/ov772x.h>
#include <media/soc_camera.h>
#include <media/soc_camera_platform.h>
@@ -29,6 +27,7 @@
#include <video/sh_mobile_lcdc.h>
#include <asm/io.h>
#include <asm/clock.h>
+#include <asm/suspend.h>
#include <cpu/sh7723.h>
static struct smsc911x_platform_config smsc911x_config = {
@@ -409,17 +408,49 @@
},
};
-struct spi_gpio_platform_data sdcard_cn3_platform_data = {
- .sck = GPIO_PTD0,
- .mosi = GPIO_PTD1,
- .miso = GPIO_PTD2,
- .num_chipselect = 1,
+static struct resource sdhi0_cn3_resources[] = {
+ [0] = {
+ .name = "SDHI0",
+ .start = 0x04ce0000,
+ .end = 0x04ce01ff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 101,
+ .flags = IORESOURCE_IRQ,
+ },
};
-static struct platform_device sdcard_cn3_device = {
- .name = "spi_gpio",
- .dev = {
- .platform_data = &sdcard_cn3_platform_data,
+static struct platform_device sdhi0_cn3_device = {
+ .name = "sh_mobile_sdhi",
+ .id = 0, /* "sdhi0" clock */
+ .num_resources = ARRAY_SIZE(sdhi0_cn3_resources),
+ .resource = sdhi0_cn3_resources,
+ .archdata = {
+ .hwblk_id = HWBLK_SDHI0,
+ },
+};
+
+static struct resource sdhi1_cn7_resources[] = {
+ [0] = {
+ .name = "SDHI1",
+ .start = 0x04cf0000,
+ .end = 0x04cf01ff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 24,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device sdhi1_cn7_device = {
+ .name = "sh_mobile_sdhi",
+ .id = 1, /* "sdhi1" clock */
+ .num_resources = ARRAY_SIZE(sdhi1_cn7_resources),
+ .resource = sdhi1_cn7_resources,
+ .archdata = {
+ .hwblk_id = HWBLK_SDHI1,
},
};
@@ -470,22 +501,26 @@
&lcdc_device,
&ceu_device,
&nand_flash_device,
- &sdcard_cn3_device,
+ &sdhi0_cn3_device,
+ &sdhi1_cn7_device,
&ap325rxa_camera[0],
&ap325rxa_camera[1],
};
-static struct spi_board_info ap325rxa_spi_devices[] = {
- {
- .modalias = "mmc_spi",
- .max_speed_hz = 5000000,
- .chip_select = 0,
- .controller_data = (void *) GPIO_PTD5,
- },
-};
+extern char ap325rxa_sdram_enter_start;
+extern char ap325rxa_sdram_enter_end;
+extern char ap325rxa_sdram_leave_start;
+extern char ap325rxa_sdram_leave_end;
static int __init ap325rxa_devices_setup(void)
{
+ /* register board specific self-refresh code */
+ sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF,
+ &ap325rxa_sdram_enter_start,
+ &ap325rxa_sdram_enter_end,
+ &ap325rxa_sdram_leave_start,
+ &ap325rxa_sdram_leave_end);
+
/* LD3 and LD4 LEDs */
gpio_request(GPIO_PTX5, NULL); /* RUN */
gpio_direction_output(GPIO_PTX5, 1);
@@ -578,12 +613,28 @@
platform_resource_setup_memory(&ceu_device, "ceu", 4 << 20);
+ /* SDHI0 - CN3 - SD CARD */
+ gpio_request(GPIO_FN_SDHI0CD_PTD, NULL);
+ gpio_request(GPIO_FN_SDHI0WP_PTD, NULL);
+ gpio_request(GPIO_FN_SDHI0D3_PTD, NULL);
+ gpio_request(GPIO_FN_SDHI0D2_PTD, NULL);
+ gpio_request(GPIO_FN_SDHI0D1_PTD, NULL);
+ gpio_request(GPIO_FN_SDHI0D0_PTD, NULL);
+ gpio_request(GPIO_FN_SDHI0CMD_PTD, NULL);
+ gpio_request(GPIO_FN_SDHI0CLK_PTD, NULL);
+
+ /* SDHI1 - CN7 - MICRO SD CARD */
+ gpio_request(GPIO_FN_SDHI1CD, NULL);
+ gpio_request(GPIO_FN_SDHI1D3, NULL);
+ gpio_request(GPIO_FN_SDHI1D2, NULL);
+ gpio_request(GPIO_FN_SDHI1D1, NULL);
+ gpio_request(GPIO_FN_SDHI1D0, NULL);
+ gpio_request(GPIO_FN_SDHI1CMD, NULL);
+ gpio_request(GPIO_FN_SDHI1CLK, NULL);
+
i2c_register_board_info(0, ap325rxa_i2c_devices,
ARRAY_SIZE(ap325rxa_i2c_devices));
- spi_register_board_info(ap325rxa_spi_devices,
- ARRAY_SIZE(ap325rxa_spi_devices));
-
return platform_add_devices(ap325rxa_devices,
ARRAY_SIZE(ap325rxa_devices));
}
diff --git a/arch/sh/boards/mach-ecovec24/Makefile b/arch/sh/boards/mach-ecovec24/Makefile
index 51f8521..e69bc82 100644
--- a/arch/sh/boards/mach-ecovec24/Makefile
+++ b/arch/sh/boards/mach-ecovec24/Makefile
@@ -6,4 +6,4 @@
# for more details.
#
-obj-y := setup.o
\ No newline at end of file
+obj-y := setup.o sdram.o
\ No newline at end of file
diff --git a/arch/sh/boards/mach-ecovec24/sdram.S b/arch/sh/boards/mach-ecovec24/sdram.S
new file mode 100644
index 0000000..8334400
--- /dev/null
+++ b/arch/sh/boards/mach-ecovec24/sdram.S
@@ -0,0 +1,52 @@
+/*
+ * Ecovec24 sdram self/auto-refresh setup code
+ *
+ * Copyright (C) 2009 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/sys.h>
+#include <linux/errno.h>
+#include <linux/linkage.h>
+#include <asm/asm-offsets.h>
+#include <asm/suspend.h>
+#include <asm/romimage-macros.h>
+
+/* code to enter and leave self-refresh. must be self-contained.
+ * this code will be copied to on-chip memory and executed from there.
+ */
+ .balign 4
+ENTRY(ecovec24_sdram_enter_start)
+
+ /* DBSC: put memory in self-refresh mode */
+
+ ED 0xFD000010, 0x00000000 /* DBEN */
+ ED 0xFD000040, 0x00000000 /* DBRFPDN0 */
+ ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
+ ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
+ ED 0xFD000040, 0x00000001 /* DBRFPDN0 */
+
+ rts
+ nop
+
+ENTRY(ecovec24_sdram_enter_end)
+
+ .balign 4
+ENTRY(ecovec24_sdram_leave_start)
+
+ /* DBSC: put memory in auto-refresh mode */
+
+ ED 0xFD000040, 0x00000000 /* DBRFPDN0 */
+ WAIT 1
+ ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
+ ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
+ ED 0xFD000010, 0x00000001 /* DBEN */
+ ED 0xFD000040, 0x00010000 /* DBRFPDN0 */
+
+ rts
+ nop
+
+ENTRY(ecovec24_sdram_leave_end)
diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index 3b1ceb4..826e623 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -20,12 +20,14 @@
#include <linux/i2c.h>
#include <linux/i2c/tsc2007.h>
#include <linux/input.h>
+#include <linux/input/sh_keysc.h>
+#include <linux/mfd/sh_mobile_sdhi.h>
#include <video/sh_mobile_lcdc.h>
#include <media/sh_mobile_ceu.h>
#include <asm/heartbeat.h>
#include <asm/sh_eth.h>
-#include <asm/sh_keysc.h>
#include <asm/clock.h>
+#include <asm/suspend.h>
#include <cpu/sh7724.h>
/*
@@ -147,6 +149,9 @@
},
.num_resources = ARRAY_SIZE(sh_eth_resources),
.resource = sh_eth_resources,
+ .archdata = {
+ .hwblk_id = HWBLK_ETHER,
+ },
};
/* USB0 host */
@@ -185,30 +190,18 @@
.resource = usb0_host_resources,
};
-/*
- * USB1
- *
- * CN5 can use both host/function,
- * and we can determine it by checking PTB[3]
- *
- * This time only USB1 host is supported.
- */
+/* USB1 host/function */
void usb1_port_power(int port, int power)
{
- if (!gpio_get_value(GPIO_PTB3)) {
- printk(KERN_ERR "USB1 function is not supported\n");
- return;
- }
-
gpio_set_value(GPIO_PTB5, power);
}
-static struct r8a66597_platdata usb1_host_data = {
+static struct r8a66597_platdata usb1_common_data = {
.on_chip = 1,
.port_power = usb1_port_power,
};
-static struct resource usb1_host_resources[] = {
+static struct resource usb1_common_resources[] = {
[0] = {
.start = 0xa4d90000,
.end = 0xa4d90124 - 1,
@@ -221,16 +214,16 @@
},
};
-static struct platform_device usb1_host_device = {
- .name = "r8a66597_hcd",
+static struct platform_device usb1_common_device = {
+ /* .name will be added in arch_setup */
.id = 1,
.dev = {
.dma_mask = NULL, /* not use dma */
.coherent_dma_mask = 0xffffffff,
- .platform_data = &usb1_host_data,
+ .platform_data = &usb1_common_data,
},
- .num_resources = ARRAY_SIZE(usb1_host_resources),
- .resource = usb1_host_resources,
+ .num_resources = ARRAY_SIZE(usb1_common_resources),
+ .resource = usb1_common_resources,
};
/* LCDC */
@@ -428,16 +421,90 @@
.irq = IRQ0,
};
+/* SHDI0 */
+static void sdhi0_set_pwr(struct platform_device *pdev, int state)
+{
+ gpio_set_value(GPIO_PTB6, state);
+}
+
+static struct sh_mobile_sdhi_info sdhi0_info = {
+ .set_pwr = sdhi0_set_pwr,
+};
+
+static struct resource sdhi0_resources[] = {
+ [0] = {
+ .name = "SDHI0",
+ .start = 0x04ce0000,
+ .end = 0x04ce01ff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 101,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device sdhi0_device = {
+ .name = "sh_mobile_sdhi",
+ .num_resources = ARRAY_SIZE(sdhi0_resources),
+ .resource = sdhi0_resources,
+ .id = 0,
+ .dev = {
+ .platform_data = &sdhi0_info,
+ },
+ .archdata = {
+ .hwblk_id = HWBLK_SDHI0,
+ },
+};
+
+/* SHDI1 */
+static void sdhi1_set_pwr(struct platform_device *pdev, int state)
+{
+ gpio_set_value(GPIO_PTB7, state);
+}
+
+static struct sh_mobile_sdhi_info sdhi1_info = {
+ .set_pwr = sdhi1_set_pwr,
+};
+
+static struct resource sdhi1_resources[] = {
+ [0] = {
+ .name = "SDHI1",
+ .start = 0x04cf0000,
+ .end = 0x04cf01ff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 24,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device sdhi1_device = {
+ .name = "sh_mobile_sdhi",
+ .num_resources = ARRAY_SIZE(sdhi1_resources),
+ .resource = sdhi1_resources,
+ .id = 1,
+ .dev = {
+ .platform_data = &sdhi1_info,
+ },
+ .archdata = {
+ .hwblk_id = HWBLK_SDHI1,
+ },
+};
+
static struct platform_device *ecovec_devices[] __initdata = {
&heartbeat_device,
&nor_flash_device,
&sh_eth_device,
&usb0_host_device,
- &usb1_host_device, /* USB1 host support */
+ &usb1_common_device,
&lcdc_device,
&ceu0_device,
&ceu1_device,
&keysc_device,
+ &sdhi0_device,
+ &sdhi1_device,
};
#define EEPROM_ADDR 0x50
@@ -466,12 +533,9 @@
return buf;
}
-#define MAC_LEN 6
-static void __init sh_eth_init(void)
+static void __init sh_eth_init(struct sh_eth_plat_data *pd)
{
struct i2c_adapter *a = i2c_get_adapter(1);
- struct clk *eth_clk;
- u8 mac[MAC_LEN];
int i;
if (!a) {
@@ -479,39 +543,30 @@
return;
}
- eth_clk = clk_get(NULL, "eth0");
- if (!eth_clk) {
- pr_err("can not get eth0 clk\n");
- return;
- }
-
/* read MAC address frome EEPROM */
- for (i = 0; i < MAC_LEN; i++) {
- mac[i] = mac_read(a, 0x10 + i);
+ for (i = 0; i < sizeof(pd->mac_addr); i++) {
+ pd->mac_addr[i] = mac_read(a, 0x10 + i);
msleep(10);
}
-
- /* clock enable */
- clk_enable(eth_clk);
-
- /* reset sh-eth */
- ctrl_outl(0x1, SH_ETH_ADDR + 0x0);
-
- /* set MAC addr */
- ctrl_outl((mac[0] << 24) |
- (mac[1] << 16) |
- (mac[2] << 8) |
- (mac[3] << 0), SH_ETH_MAHR);
- ctrl_outl((mac[4] << 8) |
- (mac[5] << 0), SH_ETH_MALR);
-
- clk_put(eth_clk);
}
#define PORT_HIZA 0xA4050158
#define IODRIVEA 0xA405018A
+
+extern char ecovec24_sdram_enter_start;
+extern char ecovec24_sdram_enter_end;
+extern char ecovec24_sdram_leave_start;
+extern char ecovec24_sdram_leave_end;
+
static int __init arch_setup(void)
{
+ /* register board specific self-refresh code */
+ sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF,
+ &ecovec24_sdram_enter_start,
+ &ecovec24_sdram_enter_end,
+ &ecovec24_sdram_leave_start,
+ &ecovec24_sdram_leave_end);
+
/* enable STATUS0, STATUS2 and PDSTATUS */
gpio_request(GPIO_FN_STATUS0, NULL);
gpio_request(GPIO_FN_STATUS2, NULL);
@@ -561,6 +616,14 @@
ctrl_outw(0x0600, 0xa40501d4);
ctrl_outw(0x0600, 0xa4050192);
+ if (gpio_get_value(GPIO_PTB3)) {
+ printk(KERN_INFO "USB1 function is selected\n");
+ usb1_common_device.name = "r8a66597_udc";
+ } else {
+ printk(KERN_INFO "USB1 host is selected\n");
+ usb1_common_device.name = "r8a66597_hcd";
+ }
+
/* enable LCDC */
gpio_request(GPIO_FN_LCDD23, NULL);
gpio_request(GPIO_FN_LCDD22, NULL);
@@ -603,8 +666,8 @@
gpio_direction_output(GPIO_PTR1, 0);
gpio_direction_output(GPIO_PTA2, 0);
- /* I/O buffer drive ability is low */
- ctrl_outw((ctrl_inw(IODRIVEA) & ~0x00c0) | 0x0040 , IODRIVEA);
+ /* I/O buffer drive ability is high */
+ ctrl_outw((ctrl_inw(IODRIVEA) & ~0x00c0) | 0x0080 , IODRIVEA);
if (gpio_get_value(GPIO_PTE6)) {
/* DVI */
@@ -710,6 +773,33 @@
gpio_direction_input(GPIO_PTR5);
gpio_direction_input(GPIO_PTR6);
+ /* enable SDHI0 (needs DS2.4 set to ON) */
+ gpio_request(GPIO_FN_SDHI0CD, NULL);
+ gpio_request(GPIO_FN_SDHI0WP, NULL);
+ gpio_request(GPIO_FN_SDHI0CMD, NULL);
+ gpio_request(GPIO_FN_SDHI0CLK, NULL);
+ gpio_request(GPIO_FN_SDHI0D3, NULL);
+ gpio_request(GPIO_FN_SDHI0D2, NULL);
+ gpio_request(GPIO_FN_SDHI0D1, NULL);
+ gpio_request(GPIO_FN_SDHI0D0, NULL);
+ gpio_request(GPIO_PTB6, NULL);
+ gpio_direction_output(GPIO_PTB6, 0);
+
+ /* enable SDHI1 (needs DS2.6,7 set to ON,OFF) */
+ gpio_request(GPIO_FN_SDHI1CD, NULL);
+ gpio_request(GPIO_FN_SDHI1WP, NULL);
+ gpio_request(GPIO_FN_SDHI1CMD, NULL);
+ gpio_request(GPIO_FN_SDHI1CLK, NULL);
+ gpio_request(GPIO_FN_SDHI1D3, NULL);
+ gpio_request(GPIO_FN_SDHI1D2, NULL);
+ gpio_request(GPIO_FN_SDHI1D1, NULL);
+ gpio_request(GPIO_FN_SDHI1D0, NULL);
+ gpio_request(GPIO_PTB7, NULL);
+ gpio_direction_output(GPIO_PTB7, 0);
+
+ /* I/O buffer drive ability is high for SDHI1 */
+ ctrl_outw((ctrl_inw(IODRIVEA) & ~0x3000) | 0x2000 , IODRIVEA);
+
/* enable I2C device */
i2c_register_board_info(1, i2c1_devices,
ARRAY_SIZE(i2c1_devices));
@@ -721,12 +811,11 @@
static int __init devices_setup(void)
{
- sh_eth_init();
+ sh_eth_init(&sh_eth_plat);
return 0;
}
device_initcall(devices_setup);
-
static struct sh_machine_vector mv_ecovec __initmv = {
.mv_name = "R0P7724 (EcoVec)",
};
diff --git a/arch/sh/boards/mach-highlander/setup.c b/arch/sh/boards/mach-highlander/setup.c
index 566e69d..f663c14 100644
--- a/arch/sh/boards/mach-highlander/setup.c
+++ b/arch/sh/boards/mach-highlander/setup.c
@@ -384,7 +384,7 @@
static int highlander_irq_demux(int irq)
{
- if (irq >= HL_NR_IRL || !irl2irq[irq])
+ if (irq >= HL_NR_IRL || irq < 0 || !irl2irq[irq])
return irq;
return irl2irq[irq];
diff --git a/arch/sh/boards/mach-kfr2r09/Makefile b/arch/sh/boards/mach-kfr2r09/Makefile
index 5d58678..4e577a3 100644
--- a/arch/sh/boards/mach-kfr2r09/Makefile
+++ b/arch/sh/boards/mach-kfr2r09/Makefile
@@ -1,2 +1,2 @@
-obj-y := setup.o
+obj-y := setup.o sdram.o
obj-$(CONFIG_FB_SH_MOBILE_LCDC) += lcd_wqvga.o
diff --git a/arch/sh/boards/mach-kfr2r09/sdram.S b/arch/sh/boards/mach-kfr2r09/sdram.S
new file mode 100644
index 0000000..0c9f55b
--- /dev/null
+++ b/arch/sh/boards/mach-kfr2r09/sdram.S
@@ -0,0 +1,80 @@
+/*
+ * KFR2R09 sdram self/auto-refresh setup code
+ *
+ * Copyright (C) 2009 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/sys.h>
+#include <linux/errno.h>
+#include <linux/linkage.h>
+#include <asm/asm-offsets.h>
+#include <asm/suspend.h>
+#include <asm/romimage-macros.h>
+
+/* code to enter and leave self-refresh. must be self-contained.
+ * this code will be copied to on-chip memory and executed from there.
+ */
+ .balign 4
+ENTRY(kfr2r09_sdram_enter_start)
+
+ /* DBSC: put memory in self-refresh mode */
+
+ ED 0xFD000010, 0x00000000 /* DBEN */
+ ED 0xFD000040, 0x00000000 /* DBRFPDN0 */
+ ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
+ ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
+ ED 0xFD000040, 0x00000001 /* DBRFPDN0 */
+
+ rts
+ nop
+
+ENTRY(kfr2r09_sdram_enter_end)
+
+ .balign 4
+ENTRY(kfr2r09_sdram_leave_start)
+
+ /* DBSC: put memory in auto-refresh mode */
+
+ mov.l @(SH_SLEEP_MODE, r5), r0
+ tst #SUSP_SH_RSTANDBY, r0
+ bf resume_rstandby
+
+ ED 0xFD000040, 0x00000000 /* DBRFPDN0 */
+ WAIT 1
+ ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
+ ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
+ ED 0xFD000010, 0x00000001 /* DBEN */
+ ED 0xFD000040, 0x00010000 /* DBRFPDN0 */
+
+ rts
+ nop
+
+resume_rstandby:
+
+ /* DBSC: re-initialize and put in auto-refresh */
+
+ ED 0xFD000108, 0x40000301 /* DBPDCNT0 */
+ ED 0xFD000020, 0x011B0002 /* DBCONF */
+ ED 0xFD000030, 0x03060E02 /* DBTR0 */
+ ED 0xFD000034, 0x01020102 /* DBTR1 */
+ ED 0xFD000038, 0x01090406 /* DBTR2 */
+ ED 0xFD000008, 0x00000004 /* DBKIND */
+ ED 0xFD000040, 0x00000001 /* DBRFPDN0 */
+ ED 0xFD000040, 0x00000000 /* DBRFPDN0 */
+ ED 0xFD000018, 0x00000001 /* DBCKECNT */
+ WAIT 1
+ ED 0xFD000010, 0x00000001 /* DBEN */
+ ED 0xFD000044, 0x000004AF /* DBRFPDN1 */
+ ED 0xFD000048, 0x20CF0037 /* DBRFPDN2 */
+ ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
+ ED 0xFD000108, 0x40000300 /* DBPDCNT0 */
+ ED 0xFD000040, 0x00010000 /* DBRFPDN0 */
+
+ rts
+ nop
+
+ENTRY(kfr2r09_sdram_leave_end)
diff --git a/arch/sh/boards/mach-kfr2r09/setup.c b/arch/sh/boards/mach-kfr2r09/setup.c
index c08d33f..87438d6 100644
--- a/arch/sh/boards/mach-kfr2r09/setup.c
+++ b/arch/sh/boards/mach-kfr2r09/setup.c
@@ -16,13 +16,16 @@
#include <linux/clk.h>
#include <linux/gpio.h>
#include <linux/input.h>
+#include <linux/input/sh_keysc.h>
#include <linux/i2c.h>
#include <linux/usb/r8a66597.h>
+#include <media/soc_camera.h>
+#include <media/sh_mobile_ceu.h>
#include <video/sh_mobile_lcdc.h>
+#include <asm/suspend.h>
#include <asm/clock.h>
#include <asm/machvec.h>
#include <asm/io.h>
-#include <asm/sh_keysc.h>
#include <cpu/sh7724.h>
#include <mach/kfr2r09.h>
@@ -212,11 +215,154 @@
.resource = kfr2r09_usb0_gadget_resources,
};
+static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
+ .flags = SH_CEU_FLAG_USE_8BIT_BUS,
+};
+
+static struct resource kfr2r09_ceu_resources[] = {
+ [0] = {
+ .name = "CEU",
+ .start = 0xfe910000,
+ .end = 0xfe91009f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 52,
+ .end = 52,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ /* place holder for contiguous memory */
+ },
+};
+
+static struct platform_device kfr2r09_ceu_device = {
+ .name = "sh_mobile_ceu",
+ .id = 0, /* "ceu0" clock */
+ .num_resources = ARRAY_SIZE(kfr2r09_ceu_resources),
+ .resource = kfr2r09_ceu_resources,
+ .dev = {
+ .platform_data = &sh_mobile_ceu_info,
+ },
+ .archdata = {
+ .hwblk_id = HWBLK_CEU0,
+ },
+};
+
+static struct i2c_board_info kfr2r09_i2c_camera = {
+ I2C_BOARD_INFO("rj54n1cb0c", 0x50),
+};
+
+static struct clk *camera_clk;
+
+#define DRVCRB 0xA405018C
+static int camera_power(struct device *dev, int mode)
+{
+ int ret;
+
+ if (mode) {
+ long rate;
+
+ camera_clk = clk_get(NULL, "video_clk");
+ if (IS_ERR(camera_clk))
+ return PTR_ERR(camera_clk);
+
+ /* set VIO_CKO clock to 25MHz */
+ rate = clk_round_rate(camera_clk, 25000000);
+ ret = clk_set_rate(camera_clk, rate);
+ if (ret < 0)
+ goto eclkrate;
+
+ /* set DRVCRB
+ *
+ * use 1.8 V for VccQ_VIO
+ * use 2.85V for VccQ_SR
+ */
+ ctrl_outw((ctrl_inw(DRVCRB) & ~0x0003) | 0x0001, DRVCRB);
+
+ /* reset clear */
+ ret = gpio_request(GPIO_PTB4, NULL);
+ if (ret < 0)
+ goto eptb4;
+ ret = gpio_request(GPIO_PTB7, NULL);
+ if (ret < 0)
+ goto eptb7;
+
+ ret = gpio_direction_output(GPIO_PTB4, 1);
+ if (!ret)
+ ret = gpio_direction_output(GPIO_PTB7, 1);
+ if (ret < 0)
+ goto egpioout;
+ msleep(1);
+
+ ret = clk_enable(camera_clk); /* start VIO_CKO */
+ if (ret < 0)
+ goto eclkon;
+
+ return 0;
+ }
+
+ ret = 0;
+
+ clk_disable(camera_clk);
+eclkon:
+ gpio_set_value(GPIO_PTB7, 0);
+egpioout:
+ gpio_set_value(GPIO_PTB4, 0);
+ gpio_free(GPIO_PTB7);
+eptb7:
+ gpio_free(GPIO_PTB4);
+eptb4:
+eclkrate:
+ clk_put(camera_clk);
+ return ret;
+}
+
+static struct soc_camera_link rj54n1_link = {
+ .power = camera_power,
+ .board_info = &kfr2r09_i2c_camera,
+ .i2c_adapter_id = 1,
+ .module_name = "rj54n1cb0c",
+};
+
+static struct platform_device kfr2r09_camera = {
+ .name = "soc-camera-pdrv",
+ .id = 0,
+ .dev = {
+ .platform_data = &rj54n1_link,
+ },
+};
+
+static struct resource kfr2r09_sh_sdhi0_resources[] = {
+ [0] = {
+ .name = "SDHI0",
+ .start = 0x04ce0000,
+ .end = 0x04ce01ff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 101,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device kfr2r09_sh_sdhi0_device = {
+ .name = "sh_mobile_sdhi",
+ .num_resources = ARRAY_SIZE(kfr2r09_sh_sdhi0_resources),
+ .resource = kfr2r09_sh_sdhi0_resources,
+ .archdata = {
+ .hwblk_id = HWBLK_SDHI0,
+ },
+};
+
static struct platform_device *kfr2r09_devices[] __initdata = {
&kfr2r09_nor_flash_device,
&kfr2r09_nand_flash_device,
&kfr2r09_sh_keysc_device,
&kfr2r09_sh_lcdc_device,
+ &kfr2r09_ceu_device,
+ &kfr2r09_camera,
+ &kfr2r09_sh_sdhi0_device,
};
#define BSC_CS0BCR 0xfec10004
@@ -268,11 +414,59 @@
return 0;
}
+
+static int kfr2r09_serial_i2c_setup(void)
+{
+ struct i2c_adapter *a;
+ struct i2c_msg msg;
+ unsigned char buf[2];
+ int ret;
+
+ a = i2c_get_adapter(0);
+ if (!a)
+ return -ENODEV;
+
+ /* set bit 6 (the 7th bit) of chip at 0x09, register 0x13 */
+ buf[0] = 0x13;
+ msg.addr = 0x09;
+ msg.buf = buf;
+ msg.len = 1;
+ msg.flags = 0;
+ ret = i2c_transfer(a, &msg, 1);
+ if (ret != 1)
+ return -ENODEV;
+
+ buf[0] = 0;
+ msg.addr = 0x09;
+ msg.buf = buf;
+ msg.len = 1;
+ msg.flags = I2C_M_RD;
+ ret = i2c_transfer(a, &msg, 1);
+ if (ret != 1)
+ return -ENODEV;
+
+ buf[1] = buf[0] | (1 << 6);
+ buf[0] = 0x13;
+ msg.addr = 0x09;
+ msg.buf = buf;
+ msg.len = 2;
+ msg.flags = 0;
+ ret = i2c_transfer(a, &msg, 1);
+ if (ret != 1)
+ return -ENODEV;
+
+ return 0;
+}
#else
static int kfr2r09_usb0_gadget_i2c_setup(void)
{
return -ENODEV;
}
+
+static int kfr2r09_serial_i2c_setup(void)
+{
+ return -ENODEV;
+}
#endif
static int kfr2r09_usb0_gadget_setup(void)
@@ -299,11 +493,27 @@
return 0;
}
+extern char kfr2r09_sdram_enter_start;
+extern char kfr2r09_sdram_enter_end;
+extern char kfr2r09_sdram_leave_start;
+extern char kfr2r09_sdram_leave_end;
+
static int __init kfr2r09_devices_setup(void)
{
+ /* register board specific self-refresh code */
+ sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF |
+ SUSP_SH_RSTANDBY,
+ &kfr2r09_sdram_enter_start,
+ &kfr2r09_sdram_enter_end,
+ &kfr2r09_sdram_leave_start,
+ &kfr2r09_sdram_leave_end);
+
/* enable SCIF1 serial port for YC401 console support */
gpio_request(GPIO_FN_SCIF1_RXD, NULL);
gpio_request(GPIO_FN_SCIF1_TXD, NULL);
+ kfr2r09_serial_i2c_setup(); /* ECONTMSK(bit6=L10ONEN) set 1 */
+ gpio_request(GPIO_PTG3, NULL); /* HPON_ON */
+ gpio_direction_output(GPIO_PTG3, 1); /* HPON_ON = H */
/* setup NOR flash at CS0 */
ctrl_outl(0x36db0400, BSC_CS0BCR);
@@ -361,6 +571,32 @@
if (kfr2r09_usb0_gadget_setup() == 0)
platform_device_register(&kfr2r09_usb0_gadget_device);
+ /* CEU */
+ gpio_request(GPIO_FN_VIO_CKO, NULL);
+ gpio_request(GPIO_FN_VIO0_CLK, NULL);
+ gpio_request(GPIO_FN_VIO0_VD, NULL);
+ gpio_request(GPIO_FN_VIO0_HD, NULL);
+ gpio_request(GPIO_FN_VIO0_FLD, NULL);
+ gpio_request(GPIO_FN_VIO0_D7, NULL);
+ gpio_request(GPIO_FN_VIO0_D6, NULL);
+ gpio_request(GPIO_FN_VIO0_D5, NULL);
+ gpio_request(GPIO_FN_VIO0_D4, NULL);
+ gpio_request(GPIO_FN_VIO0_D3, NULL);
+ gpio_request(GPIO_FN_VIO0_D2, NULL);
+ gpio_request(GPIO_FN_VIO0_D1, NULL);
+ gpio_request(GPIO_FN_VIO0_D0, NULL);
+
+ platform_resource_setup_memory(&kfr2r09_ceu_device, "ceu", 4 << 20);
+
+ /* SDHI0 connected to yc304 */
+ gpio_request(GPIO_FN_SDHI0CD, NULL);
+ gpio_request(GPIO_FN_SDHI0D3, NULL);
+ gpio_request(GPIO_FN_SDHI0D2, NULL);
+ gpio_request(GPIO_FN_SDHI0D1, NULL);
+ gpio_request(GPIO_FN_SDHI0D0, NULL);
+ gpio_request(GPIO_FN_SDHI0CMD, NULL);
+ gpio_request(GPIO_FN_SDHI0CLK, NULL);
+
return platform_add_devices(kfr2r09_devices,
ARRAY_SIZE(kfr2r09_devices));
}
diff --git a/arch/sh/boards/mach-migor/Makefile b/arch/sh/boards/mach-migor/Makefile
index 5f231dd..4601a89 100644
--- a/arch/sh/boards/mach-migor/Makefile
+++ b/arch/sh/boards/mach-migor/Makefile
@@ -1,2 +1,2 @@
-obj-y := setup.o
+obj-y := setup.o sdram.o
obj-$(CONFIG_SH_MIGOR_QVGA) += lcd_qvga.o
diff --git a/arch/sh/boards/mach-migor/sdram.S b/arch/sh/boards/mach-migor/sdram.S
new file mode 100644
index 0000000..614aa3a
--- /dev/null
+++ b/arch/sh/boards/mach-migor/sdram.S
@@ -0,0 +1,69 @@
+/*
+ * Migo-R sdram self/auto-refresh setup code
+ *
+ * Copyright (C) 2009 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/sys.h>
+#include <linux/errno.h>
+#include <linux/linkage.h>
+#include <asm/asm-offsets.h>
+#include <asm/suspend.h>
+#include <asm/romimage-macros.h>
+
+/* code to enter and leave self-refresh. must be self-contained.
+ * this code will be copied to on-chip memory and executed from there.
+ */
+ .balign 4
+ENTRY(migor_sdram_enter_start)
+
+ /* SBSC: disable power down and put in self-refresh mode */
+ mov.l 1f, r4
+ mov.l 2f, r1
+ mov.l @r4, r2
+ or r1, r2
+ mov.l 3f, r3
+ and r3, r2
+ mov.l r2, @r4
+
+ rts
+ nop
+
+ .balign 4
+1: .long 0xfe400008 /* SDCR0 */
+2: .long 0x00000400
+3: .long 0xffff7fff
+ENTRY(migor_sdram_enter_end)
+
+ .balign 4
+ENTRY(migor_sdram_leave_start)
+
+ /* SBSC: set auto-refresh mode */
+ mov.l 1f, r4
+ mov.l @r4, r0
+ mov.l 4f, r1
+ and r1, r0
+ mov.l r0, @r4
+ mov.l 6f, r4
+ mov.l 8f, r0
+ mov.l @r4, r1
+ mov #-1, r4
+ add r4, r1
+ or r1, r0
+ mov.l 7f, r1
+ mov.l r0, @r1
+
+ rts
+ nop
+
+ .balign 4
+1: .long 0xfe400008 /* SDCR0 */
+4: .long 0xfffffbff
+6: .long 0xfe40001c /* RTCOR */
+7: .long 0xfe400018 /* RTCNT */
+8: .long 0xa55a0000
+ENTRY(migor_sdram_leave_end)
diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c
index 6ed1fd3..9099b6d 100644
--- a/arch/sh/boards/mach-migor/setup.c
+++ b/arch/sh/boards/mach-migor/setup.c
@@ -11,6 +11,7 @@
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/input.h>
+#include <linux/input/sh_keysc.h>
#include <linux/mtd/physmap.h>
#include <linux/mtd/nand.h>
#include <linux/i2c.h>
@@ -18,8 +19,6 @@
#include <linux/delay.h>
#include <linux/clk.h>
#include <linux/gpio.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/spi_gpio.h>
#include <video/sh_mobile_lcdc.h>
#include <media/sh_mobile_ceu.h>
#include <media/ov772x.h>
@@ -27,7 +26,7 @@
#include <asm/clock.h>
#include <asm/machvec.h>
#include <asm/io.h>
-#include <asm/sh_keysc.h>
+#include <asm/suspend.h>
#include <mach/migor.h>
#include <cpu/sh7722.h>
@@ -390,17 +389,25 @@
},
};
-struct spi_gpio_platform_data sdcard_cn9_platform_data = {
- .sck = GPIO_PTD0,
- .mosi = GPIO_PTD1,
- .miso = GPIO_PTD2,
- .num_chipselect = 1,
+static struct resource sdhi_cn9_resources[] = {
+ [0] = {
+ .name = "SDHI",
+ .start = 0x04ce0000,
+ .end = 0x04ce01ff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 101,
+ .flags = IORESOURCE_IRQ,
+ },
};
-static struct platform_device sdcard_cn9_device = {
- .name = "spi_gpio",
- .dev = {
- .platform_data = &sdcard_cn9_platform_data,
+static struct platform_device sdhi_cn9_device = {
+ .name = "sh_mobile_sdhi",
+ .num_resources = ARRAY_SIZE(sdhi_cn9_resources),
+ .resource = sdhi_cn9_resources,
+ .archdata = {
+ .hwblk_id = HWBLK_SDHI,
},
};
@@ -467,23 +474,24 @@
&migor_ceu_device,
&migor_nor_flash_device,
&migor_nand_flash_device,
- &sdcard_cn9_device,
+ &sdhi_cn9_device,
&migor_camera[0],
&migor_camera[1],
};
-static struct spi_board_info migor_spi_devices[] = {
- {
- .modalias = "mmc_spi",
- .max_speed_hz = 5000000,
- .chip_select = 0,
- .controller_data = (void *) GPIO_PTD5,
- },
-};
+extern char migor_sdram_enter_start;
+extern char migor_sdram_enter_end;
+extern char migor_sdram_leave_start;
+extern char migor_sdram_leave_end;
static int __init migor_devices_setup(void)
{
-
+ /* register board specific self-refresh code */
+ sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF,
+ &migor_sdram_enter_start,
+ &migor_sdram_enter_end,
+ &migor_sdram_leave_start,
+ &migor_sdram_leave_end);
#ifdef CONFIG_PM
/* Let D11 LED show STATUS0 */
gpio_request(GPIO_FN_STATUS0, NULL);
@@ -525,6 +533,16 @@
gpio_request(GPIO_PTA1, NULL);
gpio_direction_input(GPIO_PTA1);
+ /* SDHI */
+ gpio_request(GPIO_FN_SDHICD, NULL);
+ gpio_request(GPIO_FN_SDHIWP, NULL);
+ gpio_request(GPIO_FN_SDHID3, NULL);
+ gpio_request(GPIO_FN_SDHID2, NULL);
+ gpio_request(GPIO_FN_SDHID1, NULL);
+ gpio_request(GPIO_FN_SDHID0, NULL);
+ gpio_request(GPIO_FN_SDHICMD, NULL);
+ gpio_request(GPIO_FN_SDHICLK, NULL);
+
/* Touch Panel */
gpio_request(GPIO_FN_IRQ6, NULL);
@@ -612,9 +630,6 @@
i2c_register_board_info(0, migor_i2c_devices,
ARRAY_SIZE(migor_i2c_devices));
- spi_register_board_info(migor_spi_devices,
- ARRAY_SIZE(migor_spi_devices));
-
return platform_add_devices(migor_devices, ARRAY_SIZE(migor_devices));
}
arch_initcall(migor_devices_setup);
diff --git a/arch/sh/boards/mach-r2d/irq.c b/arch/sh/boards/mach-r2d/irq.c
index c70fece..78d7b27 100644
--- a/arch/sh/boards/mach-r2d/irq.c
+++ b/arch/sh/boards/mach-r2d/irq.c
@@ -116,7 +116,7 @@
int rts7751r2d_irq_demux(int irq)
{
- if (irq >= R2D_NR_IRL || !irl2irq[irq])
+ if (irq >= R2D_NR_IRL || irq < 0 || !irl2irq[irq])
return irq;
return irl2irq[irq];
diff --git a/arch/sh/boards/mach-se/7722/irq.c b/arch/sh/boards/mach-se/7722/irq.c
index 02d21a3..4eb31ac 100644
--- a/arch/sh/boards/mach-se/7722/irq.c
+++ b/arch/sh/boards/mach-se/7722/irq.c
@@ -16,15 +16,17 @@
#include <asm/io.h>
#include <mach-se/mach/se7722.h>
+unsigned int se7722_fpga_irq[SE7722_FPGA_IRQ_NR] = { 0, };
+
static void disable_se7722_irq(unsigned int irq)
{
- unsigned int bit = irq - SE7722_FPGA_IRQ_BASE;
+ unsigned int bit = (unsigned int)get_irq_chip_data(irq);
ctrl_outw(ctrl_inw(IRQ01_MASK) | 1 << bit, IRQ01_MASK);
}
static void enable_se7722_irq(unsigned int irq)
{
- unsigned int bit = irq - SE7722_FPGA_IRQ_BASE;
+ unsigned int bit = (unsigned int)get_irq_chip_data(irq);
ctrl_outw(ctrl_inw(IRQ01_MASK) & ~(1 << bit), IRQ01_MASK);
}
@@ -38,18 +40,15 @@
static void se7722_irq_demux(unsigned int irq, struct irq_desc *desc)
{
unsigned short intv = ctrl_inw(IRQ01_STS);
- struct irq_desc *ext_desc;
- unsigned int ext_irq = SE7722_FPGA_IRQ_BASE;
+ unsigned int ext_irq = 0;
intv &= (1 << SE7722_FPGA_IRQ_NR) - 1;
- while (intv) {
- if (intv & 1) {
- ext_desc = irq_desc + ext_irq;
- handle_level_irq(ext_irq, ext_desc);
- }
- intv >>= 1;
- ext_irq++;
+ for (; intv; intv >>= 1, ext_irq++) {
+ if (!(intv & 1))
+ continue;
+
+ generic_handle_irq(se7722_fpga_irq[ext_irq]);
}
}
@@ -63,11 +62,18 @@
ctrl_outw(0, IRQ01_MASK); /* disable all irqs */
ctrl_outw(0x2000, 0xb03fffec); /* mrshpc irq enable */
- for (i = 0; i < SE7722_FPGA_IRQ_NR; i++)
- set_irq_chip_and_handler_name(SE7722_FPGA_IRQ_BASE + i,
+ for (i = 0; i < SE7722_FPGA_IRQ_NR; i++) {
+ se7722_fpga_irq[i] = create_irq();
+ if (se7722_fpga_irq[i] < 0)
+ return;
+
+ set_irq_chip_and_handler_name(se7722_fpga_irq[i],
&se7722_irq_chip,
handle_level_irq, "level");
+ set_irq_chip_data(se7722_fpga_irq[i], (void *)i);
+ }
+
set_irq_chained_handler(IRQ0_IRQ, se7722_irq_demux);
set_irq_type(IRQ0_IRQ, IRQ_TYPE_LEVEL_LOW);
diff --git a/arch/sh/boards/mach-se/7722/setup.c b/arch/sh/boards/mach-se/7722/setup.c
index 3637407..b1cb942 100644
--- a/arch/sh/boards/mach-se/7722/setup.c
+++ b/arch/sh/boards/mach-se/7722/setup.c
@@ -14,6 +14,7 @@
#include <linux/platform_device.h>
#include <linux/ata_platform.h>
#include <linux/input.h>
+#include <linux/input/sh_keysc.h>
#include <linux/smc91x.h>
#include <mach-se/mach/se7722.h>
#include <mach-se/mach/mrshpc.h>
@@ -21,7 +22,6 @@
#include <asm/clock.h>
#include <asm/io.h>
#include <asm/heartbeat.h>
-#include <asm/sh_keysc.h>
#include <cpu/sh7722.h>
/* Heartbeat */
@@ -60,8 +60,7 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = SMC_IRQ,
- .end = SMC_IRQ,
+ /* Filled in later */
.flags = IORESOURCE_IRQ,
},
};
@@ -90,8 +89,7 @@
.flags = IORESOURCE_IO,
},
[2] = {
- .start = MRSHPC_IRQ0,
- .end = MRSHPC_IRQ0,
+ /* Filled in later */
.flags = IORESOURCE_IRQ,
},
};
@@ -153,6 +151,14 @@
static int __init se7722_devices_setup(void)
{
mrshpc_setup_windows();
+
+ /* Wire-up dynamic vectors */
+ cf_ide_resources[2].start = cf_ide_resources[2].end =
+ se7722_fpga_irq[SE7722_FPGA_IRQ_MRSHPC0];
+
+ smc91x_eth_resources[1].start = smc91x_eth_resources[1].end =
+ se7722_fpga_irq[SE7722_FPGA_IRQ_SMC];
+
return platform_add_devices(se7722_devices, ARRAY_SIZE(se7722_devices));
}
device_initcall(se7722_devices_setup);
@@ -193,6 +199,5 @@
static struct sh_machine_vector mv_se7722 __initmv = {
.mv_name = "Solution Engine 7722" ,
.mv_setup = se7722_setup ,
- .mv_nr_irqs = SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_NR,
.mv_init_irq = init_se7722_IRQ,
};
diff --git a/arch/sh/boards/mach-se/7724/Makefile b/arch/sh/boards/mach-se/7724/Makefile
index 349cbd6..a08b368 100644
--- a/arch/sh/boards/mach-se/7724/Makefile
+++ b/arch/sh/boards/mach-se/7724/Makefile
@@ -7,4 +7,4 @@
#
#
-obj-y := setup.o irq.o
\ No newline at end of file
+obj-y := setup.o irq.o sdram.o
diff --git a/arch/sh/boards/mach-se/7724/sdram.S b/arch/sh/boards/mach-se/7724/sdram.S
new file mode 100644
index 0000000..9040167
--- /dev/null
+++ b/arch/sh/boards/mach-se/7724/sdram.S
@@ -0,0 +1,52 @@
+/*
+ * MS7724SE sdram self/auto-refresh setup code
+ *
+ * Copyright (C) 2009 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/sys.h>
+#include <linux/errno.h>
+#include <linux/linkage.h>
+#include <asm/asm-offsets.h>
+#include <asm/suspend.h>
+#include <asm/romimage-macros.h>
+
+/* code to enter and leave self-refresh. must be self-contained.
+ * this code will be copied to on-chip memory and executed from there.
+ */
+ .balign 4
+ENTRY(ms7724se_sdram_enter_start)
+
+ /* DBSC: put memory in self-refresh mode */
+
+ ED 0xFD000010, 0x00000000 /* DBEN */
+ ED 0xFD000040, 0x00000000 /* DBRFPDN0 */
+ ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
+ ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
+ ED 0xFD000040, 0x00000001 /* DBRFPDN0 */
+
+ rts
+ nop
+
+ENTRY(ms7724se_sdram_enter_end)
+
+ .balign 4
+ENTRY(ms7724se_sdram_leave_start)
+
+ /* DBSC: put memory in auto-refresh mode */
+
+ ED 0xFD000040, 0x00000000 /* DBRFPDN0 */
+ WAIT 1
+ ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
+ ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
+ ED 0xFD000010, 0x00000001 /* DBEN */
+ ED 0xFD000040, 0x00010000 /* DBRFPDN0 */
+
+ rts
+ nop
+
+ENTRY(ms7724se_sdram_leave_end)
diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c
index 0894bba..4b0f0c0 100644
--- a/arch/sh/boards/mach-se/7724/setup.c
+++ b/arch/sh/boards/mach-se/7724/setup.c
@@ -19,6 +19,7 @@
#include <linux/smc91x.h>
#include <linux/gpio.h>
#include <linux/input.h>
+#include <linux/input/sh_keysc.h>
#include <linux/usb/r8a66597.h>
#include <video/sh_mobile_lcdc.h>
#include <media/sh_mobile_ceu.h>
@@ -27,7 +28,7 @@
#include <asm/heartbeat.h>
#include <asm/sh_eth.h>
#include <asm/clock.h>
-#include <asm/sh_keysc.h>
+#include <asm/suspend.h>
#include <cpu/sh7724.h>
#include <mach-se/mach/se7724.h>
@@ -451,6 +452,52 @@
.resource = sh7724_usb1_gadget_resources,
};
+static struct resource sdhi0_cn7_resources[] = {
+ [0] = {
+ .name = "SDHI0",
+ .start = 0x04ce0000,
+ .end = 0x04ce01ff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 101,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device sdhi0_cn7_device = {
+ .name = "sh_mobile_sdhi",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(sdhi0_cn7_resources),
+ .resource = sdhi0_cn7_resources,
+ .archdata = {
+ .hwblk_id = HWBLK_SDHI0,
+ },
+};
+
+static struct resource sdhi1_cn8_resources[] = {
+ [0] = {
+ .name = "SDHI1",
+ .start = 0x04cf0000,
+ .end = 0x04cf01ff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 24,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device sdhi1_cn8_device = {
+ .name = "sh_mobile_sdhi",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(sdhi1_cn8_resources),
+ .resource = sdhi1_cn8_resources,
+ .archdata = {
+ .hwblk_id = HWBLK_SDHI1,
+ },
+};
+
static struct platform_device *ms7724se_devices[] __initdata = {
&heartbeat_device,
&smc91x_eth_device,
@@ -463,6 +510,8 @@
&sh7724_usb0_host_device,
&sh7724_usb1_gadget_device,
&fsi_device,
+ &sdhi0_cn7_device,
+ &sdhi1_cn8_device,
};
#define EEPROM_OP 0xBA206000
@@ -487,7 +536,7 @@
static void __init sh_eth_init(void)
{
int i;
- u16 mac[3];
+ u16 mac;
/* check EEPROM status */
if (!sh_eth_is_eeprom_ready())
@@ -501,16 +550,10 @@
if (!sh_eth_is_eeprom_ready())
return;
- mac[i] = ctrl_inw(EEPROM_DATA);
- mac[i] = ((mac[i] & 0xFF) << 8) | (mac[i] >> 8); /* swap */
+ mac = ctrl_inw(EEPROM_DATA);
+ sh_eth_plat.mac_addr[i << 1] = mac & 0xff;
+ sh_eth_plat.mac_addr[(i << 1) + 1] = mac >> 8;
}
-
- /* reset sh-eth */
- ctrl_outl(0x1, SH_ETH_ADDR + 0x0);
-
- /* set MAC addr */
- ctrl_outl(((mac[0] << 16) | (mac[1])), SH_ETH_MAHR);
- ctrl_outl((mac[2]), SH_ETH_MALR);
}
#define SW4140 0xBA201000
@@ -527,11 +570,22 @@
#define SW41_G 0x4000
#define SW41_H 0x8000
+extern char ms7724se_sdram_enter_start;
+extern char ms7724se_sdram_enter_end;
+extern char ms7724se_sdram_leave_start;
+extern char ms7724se_sdram_leave_end;
+
static int __init devices_setup(void)
{
u16 sw = ctrl_inw(SW4140); /* select camera, monitor */
struct clk *fsia_clk;
+ /* register board specific self-refresh code */
+ sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF,
+ &ms7724se_sdram_enter_start,
+ &ms7724se_sdram_enter_end,
+ &ms7724se_sdram_leave_start,
+ &ms7724se_sdram_leave_end);
/* Reset Release */
ctrl_outw(ctrl_inw(FPGA_OUT) &
~((1 << 1) | /* LAN */
@@ -701,6 +755,26 @@
clk_set_rate(&fsimcka_clk, 11000);
clk_put(fsia_clk);
+ /* SDHI0 connected to cn7 */
+ gpio_request(GPIO_FN_SDHI0CD, NULL);
+ gpio_request(GPIO_FN_SDHI0WP, NULL);
+ gpio_request(GPIO_FN_SDHI0D3, NULL);
+ gpio_request(GPIO_FN_SDHI0D2, NULL);
+ gpio_request(GPIO_FN_SDHI0D1, NULL);
+ gpio_request(GPIO_FN_SDHI0D0, NULL);
+ gpio_request(GPIO_FN_SDHI0CMD, NULL);
+ gpio_request(GPIO_FN_SDHI0CLK, NULL);
+
+ /* SDHI1 connected to cn8 */
+ gpio_request(GPIO_FN_SDHI1CD, NULL);
+ gpio_request(GPIO_FN_SDHI1WP, NULL);
+ gpio_request(GPIO_FN_SDHI1D3, NULL);
+ gpio_request(GPIO_FN_SDHI1D2, NULL);
+ gpio_request(GPIO_FN_SDHI1D1, NULL);
+ gpio_request(GPIO_FN_SDHI1D0, NULL);
+ gpio_request(GPIO_FN_SDHI1CMD, NULL);
+ gpio_request(GPIO_FN_SDHI1CLK, NULL);
+
/*
* enable SH-Eth
*
diff --git a/arch/sh/boot/compressed/misc.c b/arch/sh/boot/compressed/misc.c
index fd56a71..b51b1fc 100644
--- a/arch/sh/boot/compressed/misc.c
+++ b/arch/sh/boot/compressed/misc.c
@@ -131,7 +131,7 @@
#ifdef CONFIG_SUPERH64
output_addr = (CONFIG_MEMORY_START + 0x2000);
#else
- output_addr = PHYSADDR((unsigned long)&_text+PAGE_SIZE);
+ output_addr = __pa((unsigned long)&_text+PAGE_SIZE);
#ifdef CONFIG_29BIT
output_addr |= P2SEG;
#endif
diff --git a/arch/sh/boot/romimage/Makefile b/arch/sh/boot/romimage/Makefile
index 5806eee..f473a24 100644
--- a/arch/sh/boot/romimage/Makefile
+++ b/arch/sh/boot/romimage/Makefile
@@ -4,16 +4,22 @@
# create an image suitable for burning to flash from zImage
#
-targets := vmlinux head.o
+targets := vmlinux head.o zeropage.bin piggy.o
OBJECTS = $(obj)/head.o
-LDFLAGS_vmlinux := --oformat $(ld-bfd) -Ttext 0 -e romstart
+LDFLAGS_vmlinux := --oformat $(ld-bfd) -Ttext 0 -e romstart \
+ -T $(obj)/../../kernel/vmlinux.lds
$(obj)/vmlinux: $(OBJECTS) $(obj)/piggy.o FORCE
$(call if_changed,ld)
@:
+OBJCOPYFLAGS += -j .empty_zero_page
+
+$(obj)/zeropage.bin: vmlinux FORCE
+ $(call if_changed,objcopy)
+
LDFLAGS_piggy.o := -r --format binary --oformat $(ld-bfd) -T
-$(obj)/piggy.o: $(obj)/vmlinux.scr arch/sh/boot/zImage FORCE
+$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/zeropage.bin arch/sh/boot/zImage FORCE
$(call if_changed,ld)
diff --git a/arch/sh/boot/romimage/head.S b/arch/sh/boot/romimage/head.S
index 219bc62..93e779a 100644
--- a/arch/sh/boot/romimage/head.S
+++ b/arch/sh/boot/romimage/head.S
@@ -5,6 +5,44 @@
*/
.text
+ #include <asm/page.h>
+
.global romstart
romstart:
+ /* include board specific setup code */
#include <mach/romimage.h>
+
+ /* copy the empty_zero_page contents to where vmlinux expects it */
+ mova empty_zero_page_src, r0
+ mov.l empty_zero_page_dst, r1
+ mov #(PAGE_SHIFT - 4), r4
+ mov #1, r3
+ shld r4, r3 /* r3 = PAGE_SIZE / 16 */
+
+1:
+ mov.l @r0, r4
+ mov.l @(4, r0), r5
+ mov.l @(8, r0), r6
+ mov.l @(12, r0), r7
+ add #16,r0
+ mov.l r4, @r1
+ mov.l r5, @(4, r1)
+ mov.l r6, @(8, r1)
+ mov.l r7, @(12, r1)
+ dt r3
+ add #16,r1
+ bf 1b
+
+ /* jump to the zImage entry point located after the zero page data */
+ mov #PAGE_SHIFT, r4
+ mov #1, r1
+ shld r4, r1
+ mova empty_zero_page_src, r0
+ add r1, r0
+ jmp @r0
+ nop
+
+ .align 2
+empty_zero_page_dst:
+ .long _text
+empty_zero_page_src:
diff --git a/arch/sh/drivers/dma/dma-sysfs.c b/arch/sh/drivers/dma/dma-sysfs.c
index 347ee11..1ee631d 100644
--- a/arch/sh/drivers/dma/dma-sysfs.c
+++ b/arch/sh/drivers/dma/dma-sysfs.c
@@ -13,7 +13,6 @@
#include <linux/init.h>
#include <linux/sysdev.h>
#include <linux/platform_device.h>
-#include <linux/module.h>
#include <linux/err.h>
#include <linux/string.h>
#include <asm/dma.h>
@@ -21,7 +20,6 @@
static struct sysdev_class dma_sysclass = {
.name = "dma",
};
-EXPORT_SYMBOL(dma_sysclass);
static ssize_t dma_show_devices(struct sys_device *dev,
struct sysdev_attribute *attr, char *buf)
diff --git a/arch/sh/drivers/pci/Kconfig b/arch/sh/drivers/pci/Kconfig
deleted file mode 100644
index e8db585..0000000
--- a/arch/sh/drivers/pci/Kconfig
+++ /dev/null
@@ -1,19 +0,0 @@
-config PCI
- bool "PCI support"
- depends on SYS_SUPPORTS_PCI
- help
- Find out whether you have a PCI motherboard. PCI is the name of a
- bus system, i.e. the way the CPU talks to the other stuff inside
- your box. If you have PCI, say Y, otherwise N.
-
-config SH_PCIDMA_NONCOHERENT
- bool "Cache and PCI noncoherent"
- depends on PCI
- default y
- help
- Enable this option if your platform does not have a CPU cache which
- remains coherent with PCI DMA. It is safest to say 'Y', although you
- will see better performance if you can say 'N', because the PCI DMA
- code will not have to flush the CPU's caches. If you have a PCI host
- bridge integrated with your SH CPU, refer carefully to the chip specs
- to see if you can say 'N' here. Otherwise, leave it as 'Y'.
diff --git a/arch/sh/include/asm/addrspace.h b/arch/sh/include/asm/addrspace.h
index 80d4081..99d6b3e 100644
--- a/arch/sh/include/asm/addrspace.h
+++ b/arch/sh/include/asm/addrspace.h
@@ -28,9 +28,6 @@
/* Returns the privileged segment base of a given address */
#define PXSEG(a) (((unsigned long)(a)) & 0xe0000000)
-/* Returns the physical address of a PnSEG (n=1,2) address */
-#define PHYSADDR(a) (((unsigned long)(a)) & 0x1fffffff)
-
#if defined(CONFIG_29BIT) || defined(CONFIG_PMB_FIXED)
/*
* Map an address to a certain privileged segment
@@ -60,5 +57,11 @@
#define P3_ADDR_MAX P4SEG
#endif
+#ifndef __ASSEMBLY__
+#ifdef CONFIG_PMB
+extern int __in_29bit_mode(void);
+#endif /* CONFIG_PMB */
+#endif /* __ASSEMBLY__ */
+
#endif /* __KERNEL__ */
#endif /* __ASM_SH_ADDRSPACE_H */
diff --git a/arch/sh/include/asm/atomic.h b/arch/sh/include/asm/atomic.h
index e8e7813..b16388d 100644
--- a/arch/sh/include/asm/atomic.h
+++ b/arch/sh/include/asm/atomic.h
@@ -78,11 +78,10 @@
#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
-/* Atomic operations are already serializing on SH */
-#define smp_mb__before_atomic_dec() barrier()
-#define smp_mb__after_atomic_dec() barrier()
-#define smp_mb__before_atomic_inc() barrier()
-#define smp_mb__after_atomic_inc() barrier()
+#define smp_mb__before_atomic_dec() smp_mb()
+#define smp_mb__after_atomic_dec() smp_mb()
+#define smp_mb__before_atomic_inc() smp_mb()
+#define smp_mb__after_atomic_inc() smp_mb()
#include <asm-generic/atomic-long.h>
#include <asm-generic/atomic64.h>
diff --git a/arch/sh/include/asm/bitops.h b/arch/sh/include/asm/bitops.h
index ebe595b..98511e4 100644
--- a/arch/sh/include/asm/bitops.h
+++ b/arch/sh/include/asm/bitops.h
@@ -26,8 +26,8 @@
/*
* clear_bit() doesn't provide any barrier for the compiler.
*/
-#define smp_mb__before_clear_bit() barrier()
-#define smp_mb__after_clear_bit() barrier()
+#define smp_mb__before_clear_bit() smp_mb()
+#define smp_mb__after_clear_bit() smp_mb()
#ifdef CONFIG_SUPERH32
static inline unsigned long ffz(unsigned long word)
diff --git a/arch/sh/include/asm/bugs.h b/arch/sh/include/asm/bugs.h
index 46260fc..02a19a1 100644
--- a/arch/sh/include/asm/bugs.h
+++ b/arch/sh/include/asm/bugs.h
@@ -14,11 +14,15 @@
#include <asm/processor.h>
+extern void select_idle_routine(void);
+
static void __init check_bugs(void)
{
extern unsigned long loops_per_jiffy;
char *p = &init_utsname()->machine[2]; /* "sh" */
+ select_idle_routine();
+
current_cpu_data.loops_per_jiffy = loops_per_jiffy;
switch (current_cpu_data.family) {
diff --git a/arch/sh/include/asm/dma-mapping.h b/arch/sh/include/asm/dma-mapping.h
index 69d56dd..87ced13 100644
--- a/arch/sh/include/asm/dma-mapping.h
+++ b/arch/sh/include/asm/dma-mapping.h
@@ -1,193 +1,52 @@
#ifndef __ASM_SH_DMA_MAPPING_H
#define __ASM_SH_DMA_MAPPING_H
-#include <linux/mm.h>
-#include <linux/scatterlist.h>
-#include <linux/dma-debug.h>
-#include <asm/cacheflush.h>
-#include <asm/io.h>
+extern struct dma_map_ops *dma_ops;
+extern void no_iommu_init(void);
+
+static inline struct dma_map_ops *get_dma_ops(struct device *dev)
+{
+ return dma_ops;
+}
+
#include <asm-generic/dma-coherent.h>
+#include <asm-generic/dma-mapping-common.h>
-extern struct bus_type pci_bus_type;
+static inline int dma_supported(struct device *dev, u64 mask)
+{
+ struct dma_map_ops *ops = get_dma_ops(dev);
-#define dma_supported(dev, mask) (1)
+ if (ops->dma_supported)
+ return ops->dma_supported(dev, mask);
+
+ return 1;
+}
static inline int dma_set_mask(struct device *dev, u64 mask)
{
+ struct dma_map_ops *ops = get_dma_ops(dev);
+
if (!dev->dma_mask || !dma_supported(dev, mask))
return -EIO;
+ if (ops->set_dma_mask)
+ return ops->set_dma_mask(dev, mask);
*dev->dma_mask = mask;
return 0;
}
-void *dma_alloc_coherent(struct device *dev, size_t size,
- dma_addr_t *dma_handle, gfp_t flag);
-
-void dma_free_coherent(struct device *dev, size_t size,
- void *vaddr, dma_addr_t dma_handle);
-
void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
enum dma_data_direction dir);
#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
+
+#ifdef CONFIG_DMA_COHERENT
#define dma_is_consistent(d, h) (1)
-
-static inline dma_addr_t dma_map_single(struct device *dev,
- void *ptr, size_t size,
- enum dma_data_direction dir)
-{
- dma_addr_t addr = virt_to_phys(ptr);
-
-#if defined(CONFIG_PCI) && !defined(CONFIG_SH_PCIDMA_NONCOHERENT)
- if (dev->bus == &pci_bus_type)
- return addr;
+#else
+#define dma_is_consistent(d, h) (0)
#endif
- dma_cache_sync(dev, ptr, size, dir);
-
- debug_dma_map_page(dev, virt_to_page(ptr),
- (unsigned long)ptr & ~PAGE_MASK, size,
- dir, addr, true);
-
- return addr;
-}
-
-static inline void dma_unmap_single(struct device *dev, dma_addr_t addr,
- size_t size, enum dma_data_direction dir)
-{
- debug_dma_unmap_page(dev, addr, size, dir, true);
-}
-
-static inline int dma_map_sg(struct device *dev, struct scatterlist *sg,
- int nents, enum dma_data_direction dir)
-{
- int i;
-
- for (i = 0; i < nents; i++) {
-#if !defined(CONFIG_PCI) || defined(CONFIG_SH_PCIDMA_NONCOHERENT)
- dma_cache_sync(dev, sg_virt(&sg[i]), sg[i].length, dir);
-#endif
- sg[i].dma_address = sg_phys(&sg[i]);
- sg[i].dma_length = sg[i].length;
- }
-
- debug_dma_map_sg(dev, sg, nents, i, dir);
-
- return nents;
-}
-
-static inline void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
- int nents, enum dma_data_direction dir)
-{
- debug_dma_unmap_sg(dev, sg, nents, dir);
-}
-
-static inline dma_addr_t dma_map_page(struct device *dev, struct page *page,
- unsigned long offset, size_t size,
- enum dma_data_direction dir)
-{
- return dma_map_single(dev, page_address(page) + offset, size, dir);
-}
-
-static inline void dma_unmap_page(struct device *dev, dma_addr_t dma_address,
- size_t size, enum dma_data_direction dir)
-{
- dma_unmap_single(dev, dma_address, size, dir);
-}
-
-static inline void __dma_sync_single(struct device *dev, dma_addr_t dma_handle,
- size_t size, enum dma_data_direction dir)
-{
-#if defined(CONFIG_PCI) && !defined(CONFIG_SH_PCIDMA_NONCOHERENT)
- if (dev->bus == &pci_bus_type)
- return;
-#endif
- dma_cache_sync(dev, phys_to_virt(dma_handle), size, dir);
-}
-
-static inline void dma_sync_single_range(struct device *dev,
- dma_addr_t dma_handle,
- unsigned long offset, size_t size,
- enum dma_data_direction dir)
-{
-#if defined(CONFIG_PCI) && !defined(CONFIG_SH_PCIDMA_NONCOHERENT)
- if (dev->bus == &pci_bus_type)
- return;
-#endif
- dma_cache_sync(dev, phys_to_virt(dma_handle) + offset, size, dir);
-}
-
-static inline void __dma_sync_sg(struct device *dev, struct scatterlist *sg,
- int nelems, enum dma_data_direction dir)
-{
- int i;
-
- for (i = 0; i < nelems; i++) {
-#if !defined(CONFIG_PCI) || defined(CONFIG_SH_PCIDMA_NONCOHERENT)
- dma_cache_sync(dev, sg_virt(&sg[i]), sg[i].length, dir);
-#endif
- sg[i].dma_address = sg_phys(&sg[i]);
- sg[i].dma_length = sg[i].length;
- }
-}
-
-static inline void dma_sync_single_for_cpu(struct device *dev,
- dma_addr_t dma_handle, size_t size,
- enum dma_data_direction dir)
-{
- __dma_sync_single(dev, dma_handle, size, dir);
- debug_dma_sync_single_for_cpu(dev, dma_handle, size, dir);
-}
-
-static inline void dma_sync_single_for_device(struct device *dev,
- dma_addr_t dma_handle,
- size_t size,
- enum dma_data_direction dir)
-{
- __dma_sync_single(dev, dma_handle, size, dir);
- debug_dma_sync_single_for_device(dev, dma_handle, size, dir);
-}
-
-static inline void dma_sync_single_range_for_cpu(struct device *dev,
- dma_addr_t dma_handle,
- unsigned long offset,
- size_t size,
- enum dma_data_direction direction)
-{
- dma_sync_single_for_cpu(dev, dma_handle+offset, size, direction);
- debug_dma_sync_single_range_for_cpu(dev, dma_handle,
- offset, size, direction);
-}
-
-static inline void dma_sync_single_range_for_device(struct device *dev,
- dma_addr_t dma_handle,
- unsigned long offset,
- size_t size,
- enum dma_data_direction direction)
-{
- dma_sync_single_for_device(dev, dma_handle+offset, size, direction);
- debug_dma_sync_single_range_for_device(dev, dma_handle,
- offset, size, direction);
-}
-
-
-static inline void dma_sync_sg_for_cpu(struct device *dev,
- struct scatterlist *sg, int nelems,
- enum dma_data_direction dir)
-{
- __dma_sync_sg(dev, sg, nelems, dir);
- debug_dma_sync_sg_for_cpu(dev, sg, nelems, dir);
-}
-
-static inline void dma_sync_sg_for_device(struct device *dev,
- struct scatterlist *sg, int nelems,
- enum dma_data_direction dir)
-{
- __dma_sync_sg(dev, sg, nelems, dir);
- debug_dma_sync_sg_for_device(dev, sg, nelems, dir);
-}
static inline int dma_get_cache_alignment(void)
{
@@ -200,20 +59,50 @@
static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
{
+ struct dma_map_ops *ops = get_dma_ops(dev);
+
+ if (ops->mapping_error)
+ return ops->mapping_error(dev, dma_addr);
+
return dma_addr == 0;
}
-#define ARCH_HAS_DMA_DECLARE_COHERENT_MEMORY
+static inline void *dma_alloc_coherent(struct device *dev, size_t size,
+ dma_addr_t *dma_handle, gfp_t gfp)
+{
+ struct dma_map_ops *ops = get_dma_ops(dev);
+ void *memory;
-extern int
-dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr,
- dma_addr_t device_addr, size_t size, int flags);
+ if (dma_alloc_from_coherent(dev, size, dma_handle, &memory))
+ return memory;
+ if (!ops->alloc_coherent)
+ return NULL;
-extern void
-dma_release_declared_memory(struct device *dev);
+ memory = ops->alloc_coherent(dev, size, dma_handle, gfp);
+ debug_dma_alloc_coherent(dev, size, *dma_handle, memory);
-extern void *
-dma_mark_declared_memory_occupied(struct device *dev,
- dma_addr_t device_addr, size_t size);
+ return memory;
+}
+
+static inline void dma_free_coherent(struct device *dev, size_t size,
+ void *vaddr, dma_addr_t dma_handle)
+{
+ struct dma_map_ops *ops = get_dma_ops(dev);
+
+ WARN_ON(irqs_disabled()); /* for portability */
+
+ if (dma_release_from_coherent(dev, get_order(size), vaddr))
+ return;
+
+ debug_dma_free_coherent(dev, size, vaddr, dma_handle);
+ if (ops->free_coherent)
+ ops->free_coherent(dev, size, vaddr, dma_handle);
+}
+
+/* arch/sh/mm/consistent.c */
+extern void *dma_generic_alloc_coherent(struct device *dev, size_t size,
+ dma_addr_t *dma_addr, gfp_t flag);
+extern void dma_generic_free_coherent(struct device *dev, size_t size,
+ void *vaddr, dma_addr_t dma_handle);
#endif /* __ASM_SH_DMA_MAPPING_H */
diff --git a/arch/sh/include/asm/dwarf.h b/arch/sh/include/asm/dwarf.h
index ced6795..bdccbbf 100644
--- a/arch/sh/include/asm/dwarf.h
+++ b/arch/sh/include/asm/dwarf.h
@@ -194,6 +194,12 @@
#define DWARF_ARCH_RA_REG 17
#ifndef __ASSEMBLY__
+
+#include <linux/compiler.h>
+#include <linux/bug.h>
+#include <linux/list.h>
+#include <linux/module.h>
+
/*
* Read either the frame pointer (r14) or the stack pointer (r15).
* NOTE: this MUST be inlined.
@@ -241,6 +247,12 @@
unsigned long flags;
#define DWARF_CIE_Z_AUGMENTATION (1 << 0)
+
+ /*
+ * 'mod' will be non-NULL if this CIE came from a module's
+ * .eh_frame section.
+ */
+ struct module *mod;
};
/**
@@ -255,6 +267,12 @@
unsigned char *instructions;
unsigned char *end;
struct list_head link;
+
+ /*
+ * 'mod' will be non-NULL if this FDE came from a module's
+ * .eh_frame section.
+ */
+ struct module *mod;
};
/**
@@ -364,6 +382,12 @@
extern struct dwarf_frame *dwarf_unwind_stack(unsigned long,
struct dwarf_frame *);
+extern void dwarf_free_frame(struct dwarf_frame *);
+
+extern int module_dwarf_finalize(const Elf_Ehdr *, const Elf_Shdr *,
+ struct module *);
+extern void module_dwarf_cleanup(struct module *);
+
#endif /* !__ASSEMBLY__ */
#define CFI_STARTPROC .cfi_startproc
@@ -391,6 +415,10 @@
static inline void dwarf_unwinder_init(void)
{
}
+
+#define module_dwarf_finalize(hdr, sechdrs, me) (0)
+#define module_dwarf_cleanup(mod) do { } while (0)
+
#endif
#endif /* CONFIG_DWARF_UNWINDER */
diff --git a/arch/sh/include/asm/fixmap.h b/arch/sh/include/asm/fixmap.h
index 721fcc4..5ac1e40 100644
--- a/arch/sh/include/asm/fixmap.h
+++ b/arch/sh/include/asm/fixmap.h
@@ -14,9 +14,9 @@
#define _ASM_FIXMAP_H
#include <linux/kernel.h>
+#include <linux/threads.h>
#include <asm/page.h>
#ifdef CONFIG_HIGHMEM
-#include <linux/threads.h>
#include <asm/kmap_types.h>
#endif
@@ -46,9 +46,15 @@
* fix-mapped?
*/
enum fixed_addresses {
-#define FIX_N_COLOURS 16
+ /*
+ * The FIX_CMAP entries are used by kmap_coherent() to get virtual
+ * addresses which are of a known color, and so their values are
+ * important. __fix_to_virt(FIX_CMAP_END - n) must give an address
+ * which is the same color as a page (n<<PAGE_SHIFT).
+ */
+#define FIX_N_COLOURS 8
FIX_CMAP_BEGIN,
- FIX_CMAP_END = FIX_CMAP_BEGIN + FIX_N_COLOURS,
+ FIX_CMAP_END = FIX_CMAP_BEGIN + (FIX_N_COLOURS * NR_CPUS) - 1,
FIX_UNCACHED,
#ifdef CONFIG_HIGHMEM
FIX_KMAP_BEGIN, /* reserved pte's for temporary kernel mappings */
diff --git a/arch/sh/include/asm/fpu.h b/arch/sh/include/asm/fpu.h
index 1d3aee0..fb6bbb9 100644
--- a/arch/sh/include/asm/fpu.h
+++ b/arch/sh/include/asm/fpu.h
@@ -18,16 +18,15 @@
struct task_struct;
-extern void save_fpu(struct task_struct *__tsk, struct pt_regs *regs);
+extern void save_fpu(struct task_struct *__tsk);
+void fpu_state_restore(struct pt_regs *regs);
#else
+#define save_fpu(tsk) do { } while (0)
#define release_fpu(regs) do { } while (0)
#define grab_fpu(regs) do { } while (0)
+#define fpu_state_restore(regs) do { } while (0)
-static inline void save_fpu(struct task_struct *tsk, struct pt_regs *regs)
-{
- clear_tsk_thread_flag(tsk, TIF_USEDFPU);
-}
#endif
struct user_regset;
@@ -39,19 +38,28 @@
unsigned int pos, unsigned int count,
void *kbuf, void __user *ubuf);
+static inline void __unlazy_fpu(struct task_struct *tsk, struct pt_regs *regs)
+{
+ if (task_thread_info(tsk)->status & TS_USEDFPU) {
+ task_thread_info(tsk)->status &= ~TS_USEDFPU;
+ save_fpu(tsk);
+ release_fpu(regs);
+ } else
+ tsk->fpu_counter = 0;
+}
+
static inline void unlazy_fpu(struct task_struct *tsk, struct pt_regs *regs)
{
preempt_disable();
- if (test_tsk_thread_flag(tsk, TIF_USEDFPU))
- save_fpu(tsk, regs);
+ __unlazy_fpu(tsk, regs);
preempt_enable();
}
static inline void clear_fpu(struct task_struct *tsk, struct pt_regs *regs)
{
preempt_disable();
- if (test_tsk_thread_flag(tsk, TIF_USEDFPU)) {
- clear_tsk_thread_flag(tsk, TIF_USEDFPU);
+ if (task_thread_info(tsk)->status & TS_USEDFPU) {
+ task_thread_info(tsk)->status &= ~TS_USEDFPU;
release_fpu(regs);
}
preempt_enable();
diff --git a/arch/sh/include/asm/ftrace.h b/arch/sh/include/asm/ftrace.h
index 12f3a31..13e9966 100644
--- a/arch/sh/include/asm/ftrace.h
+++ b/arch/sh/include/asm/ftrace.h
@@ -35,4 +35,21 @@
#endif /* __ASSEMBLY__ */
#endif /* CONFIG_FUNCTION_TRACER */
+#ifndef __ASSEMBLY__
+
+/* arch/sh/kernel/return_address.c */
+extern void *return_address(unsigned int);
+
+#define HAVE_ARCH_CALLER_ADDR
+
+#define CALLER_ADDR0 ((unsigned long)__builtin_return_address(0))
+#define CALLER_ADDR1 ((unsigned long)return_address(1))
+#define CALLER_ADDR2 ((unsigned long)return_address(2))
+#define CALLER_ADDR3 ((unsigned long)return_address(3))
+#define CALLER_ADDR4 ((unsigned long)return_address(4))
+#define CALLER_ADDR5 ((unsigned long)return_address(5))
+#define CALLER_ADDR6 ((unsigned long)return_address(6))
+
+#endif /* __ASSEMBLY__ */
+
#endif /* __ASM_SH_FTRACE_H */
diff --git a/arch/sh/include/asm/gpio.h b/arch/sh/include/asm/gpio.h
index 61f93da..f8d9a73 100644
--- a/arch/sh/include/asm/gpio.h
+++ b/arch/sh/include/asm/gpio.h
@@ -20,7 +20,7 @@
#endif
#define ARCH_NR_GPIOS 512
-#include <asm-generic/gpio.h>
+#include <linux/sh_pfc.h>
#ifdef CONFIG_GPIOLIB
@@ -53,84 +53,4 @@
#endif /* CONFIG_GPIOLIB */
-typedef unsigned short pinmux_enum_t;
-typedef unsigned short pinmux_flag_t;
-
-#define PINMUX_TYPE_NONE 0
-#define PINMUX_TYPE_FUNCTION 1
-#define PINMUX_TYPE_GPIO 2
-#define PINMUX_TYPE_OUTPUT 3
-#define PINMUX_TYPE_INPUT 4
-#define PINMUX_TYPE_INPUT_PULLUP 5
-#define PINMUX_TYPE_INPUT_PULLDOWN 6
-
-#define PINMUX_FLAG_TYPE (0x7)
-#define PINMUX_FLAG_WANT_PULLUP (1 << 3)
-#define PINMUX_FLAG_WANT_PULLDOWN (1 << 4)
-
-#define PINMUX_FLAG_DBIT_SHIFT 5
-#define PINMUX_FLAG_DBIT (0x1f << PINMUX_FLAG_DBIT_SHIFT)
-#define PINMUX_FLAG_DREG_SHIFT 10
-#define PINMUX_FLAG_DREG (0x3f << PINMUX_FLAG_DREG_SHIFT)
-
-struct pinmux_gpio {
- pinmux_enum_t enum_id;
- pinmux_flag_t flags;
-};
-
-#define PINMUX_GPIO(gpio, data_or_mark) [gpio] = { data_or_mark }
-#define PINMUX_DATA(data_or_mark, ids...) data_or_mark, ids, 0
-
-struct pinmux_cfg_reg {
- unsigned long reg, reg_width, field_width;
- unsigned long *cnt;
- pinmux_enum_t *enum_ids;
-};
-
-#define PINMUX_CFG_REG(name, r, r_width, f_width) \
- .reg = r, .reg_width = r_width, .field_width = f_width, \
- .cnt = (unsigned long [r_width / f_width]) {}, \
- .enum_ids = (pinmux_enum_t [(r_width / f_width) * (1 << f_width)]) \
-
-struct pinmux_data_reg {
- unsigned long reg, reg_width, reg_shadow;
- pinmux_enum_t *enum_ids;
-};
-
-#define PINMUX_DATA_REG(name, r, r_width) \
- .reg = r, .reg_width = r_width, \
- .enum_ids = (pinmux_enum_t [r_width]) \
-
-struct pinmux_range {
- pinmux_enum_t begin;
- pinmux_enum_t end;
- pinmux_enum_t force;
-};
-
-struct pinmux_info {
- char *name;
- pinmux_enum_t reserved_id;
- struct pinmux_range data;
- struct pinmux_range input;
- struct pinmux_range input_pd;
- struct pinmux_range input_pu;
- struct pinmux_range output;
- struct pinmux_range mark;
- struct pinmux_range function;
-
- unsigned first_gpio, last_gpio;
-
- struct pinmux_gpio *gpios;
- struct pinmux_cfg_reg *cfg_regs;
- struct pinmux_data_reg *data_regs;
-
- pinmux_enum_t *gpio_data;
- unsigned int gpio_data_size;
-
- unsigned long *gpio_in_use;
- struct gpio_chip chip;
-};
-
-int register_pinmux(struct pinmux_info *pip);
-
#endif /* __ASM_SH_GPIO_H */
diff --git a/arch/sh/include/asm/hardirq.h b/arch/sh/include/asm/hardirq.h
index a5be4af..48b1913 100644
--- a/arch/sh/include/asm/hardirq.h
+++ b/arch/sh/include/asm/hardirq.h
@@ -1,9 +1,16 @@
#ifndef __ASM_SH_HARDIRQ_H
#define __ASM_SH_HARDIRQ_H
-extern void ack_bad_irq(unsigned int irq);
-#define ack_bad_irq ack_bad_irq
+#include <linux/threads.h>
+#include <linux/irq.h>
-#include <asm-generic/hardirq.h>
+typedef struct {
+ unsigned int __softirq_pending;
+ unsigned int __nmi_count; /* arch dependent */
+} ____cacheline_aligned irq_cpustat_t;
+
+#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */
+
+extern void ack_bad_irq(unsigned int irq);
#endif /* __ASM_SH_HARDIRQ_H */
diff --git a/arch/sh/include/asm/io.h b/arch/sh/include/asm/io.h
index 5be45ea..512cd3e 100644
--- a/arch/sh/include/asm/io.h
+++ b/arch/sh/include/asm/io.h
@@ -90,15 +90,11 @@
#define ctrl_outl __raw_writel
#define ctrl_outq __raw_writeq
+extern unsigned long generic_io_base;
+
static inline void ctrl_delay(void)
{
-#ifdef CONFIG_CPU_SH4
- __raw_readw(CCN_PVR);
-#elif defined(P2SEG)
- __raw_readw(P2SEG);
-#else
-#error "Need a dummy address for delay"
-#endif
+ __raw_readw(generic_io_base);
}
#define __BUILD_MEMORY_STRING(bwlq, type) \
@@ -186,8 +182,6 @@
#define IO_SPACE_LIMIT 0xffffffff
-extern unsigned long generic_io_base;
-
/*
* This function provides a method for the generic case where a
* board-specific ioport_map simply needs to return the port + some
@@ -246,7 +240,7 @@
static inline void __iomem *
__ioremap_mode(unsigned long offset, unsigned long size, unsigned long flags)
{
-#if defined(CONFIG_SUPERH32) && !defined(CONFIG_PMB_FIXED)
+#if defined(CONFIG_SUPERH32) && !defined(CONFIG_PMB_FIXED) && !defined(CONFIG_PMB)
unsigned long last_addr = offset + size - 1;
#endif
void __iomem *ret;
@@ -255,7 +249,7 @@
if (ret)
return ret;
-#if defined(CONFIG_SUPERH32) && !defined(CONFIG_PMB_FIXED)
+#if defined(CONFIG_SUPERH32) && !defined(CONFIG_PMB_FIXED) && !defined(CONFIG_PMB)
/*
* For P1 and P2 space this is trivial, as everything is already
* mapped. Uncached access for P1 addresses are done through P2.
diff --git a/arch/sh/include/asm/irqflags.h b/arch/sh/include/asm/irqflags.h
index 46e71da..a741153 100644
--- a/arch/sh/include/asm/irqflags.h
+++ b/arch/sh/include/asm/irqflags.h
@@ -1,34 +1,9 @@
#ifndef __ASM_SH_IRQFLAGS_H
#define __ASM_SH_IRQFLAGS_H
-#ifdef CONFIG_SUPERH32
-#include "irqflags_32.h"
-#else
-#include "irqflags_64.h"
-#endif
+#define RAW_IRQ_DISABLED 0xf0
+#define RAW_IRQ_ENABLED 0x00
-#define raw_local_save_flags(flags) \
- do { (flags) = __raw_local_save_flags(); } while (0)
-
-static inline int raw_irqs_disabled_flags(unsigned long flags)
-{
- return (flags != 0);
-}
-
-static inline int raw_irqs_disabled(void)
-{
- unsigned long flags = __raw_local_save_flags();
-
- return raw_irqs_disabled_flags(flags);
-}
-
-#define raw_local_irq_save(flags) \
- do { (flags) = __raw_local_irq_save(); } while (0)
-
-static inline void raw_local_irq_restore(unsigned long flags)
-{
- if ((flags & 0xf0) != 0xf0)
- raw_local_irq_enable();
-}
+#include <asm-generic/irqflags.h>
#endif /* __ASM_SH_IRQFLAGS_H */
diff --git a/arch/sh/include/asm/irqflags_32.h b/arch/sh/include/asm/irqflags_32.h
deleted file mode 100644
index 60218f5..0000000
--- a/arch/sh/include/asm/irqflags_32.h
+++ /dev/null
@@ -1,99 +0,0 @@
-#ifndef __ASM_SH_IRQFLAGS_32_H
-#define __ASM_SH_IRQFLAGS_32_H
-
-static inline void raw_local_irq_enable(void)
-{
- unsigned long __dummy0, __dummy1;
-
- __asm__ __volatile__ (
- "stc sr, %0\n\t"
- "and %1, %0\n\t"
-#ifdef CONFIG_CPU_HAS_SR_RB
- "stc r6_bank, %1\n\t"
- "or %1, %0\n\t"
-#endif
- "ldc %0, sr\n\t"
- : "=&r" (__dummy0), "=r" (__dummy1)
- : "1" (~0x000000f0)
- : "memory"
- );
-}
-
-static inline void raw_local_irq_disable(void)
-{
- unsigned long flags;
-
- __asm__ __volatile__ (
- "stc sr, %0\n\t"
- "or #0xf0, %0\n\t"
- "ldc %0, sr\n\t"
- : "=&z" (flags)
- : /* no inputs */
- : "memory"
- );
-}
-
-static inline void set_bl_bit(void)
-{
- unsigned long __dummy0, __dummy1;
-
- __asm__ __volatile__ (
- "stc sr, %0\n\t"
- "or %2, %0\n\t"
- "and %3, %0\n\t"
- "ldc %0, sr\n\t"
- : "=&r" (__dummy0), "=r" (__dummy1)
- : "r" (0x10000000), "r" (0xffffff0f)
- : "memory"
- );
-}
-
-static inline void clear_bl_bit(void)
-{
- unsigned long __dummy0, __dummy1;
-
- __asm__ __volatile__ (
- "stc sr, %0\n\t"
- "and %2, %0\n\t"
- "ldc %0, sr\n\t"
- : "=&r" (__dummy0), "=r" (__dummy1)
- : "1" (~0x10000000)
- : "memory"
- );
-}
-
-static inline unsigned long __raw_local_save_flags(void)
-{
- unsigned long flags;
-
- __asm__ __volatile__ (
- "stc sr, %0\n\t"
- "and #0xf0, %0\n\t"
- : "=&z" (flags)
- : /* no inputs */
- : "memory"
- );
-
- return flags;
-}
-
-static inline unsigned long __raw_local_irq_save(void)
-{
- unsigned long flags, __dummy;
-
- __asm__ __volatile__ (
- "stc sr, %1\n\t"
- "mov %1, %0\n\t"
- "or #0xf0, %0\n\t"
- "ldc %0, sr\n\t"
- "mov %1, %0\n\t"
- "and #0xf0, %0\n\t"
- : "=&z" (flags), "=&r" (__dummy)
- : /* no inputs */
- : "memory"
- );
-
- return flags;
-}
-
-#endif /* __ASM_SH_IRQFLAGS_32_H */
diff --git a/arch/sh/include/asm/irqflags_64.h b/arch/sh/include/asm/irqflags_64.h
deleted file mode 100644
index 88f6522..0000000
--- a/arch/sh/include/asm/irqflags_64.h
+++ /dev/null
@@ -1,85 +0,0 @@
-#ifndef __ASM_SH_IRQFLAGS_64_H
-#define __ASM_SH_IRQFLAGS_64_H
-
-#include <cpu/registers.h>
-
-#define SR_MASK_LL 0x00000000000000f0LL
-#define SR_BL_LL 0x0000000010000000LL
-
-static inline void raw_local_irq_enable(void)
-{
- unsigned long long __dummy0, __dummy1 = ~SR_MASK_LL;
-
- __asm__ __volatile__("getcon " __SR ", %0\n\t"
- "and %0, %1, %0\n\t"
- "putcon %0, " __SR "\n\t"
- : "=&r" (__dummy0)
- : "r" (__dummy1));
-}
-
-static inline void raw_local_irq_disable(void)
-{
- unsigned long long __dummy0, __dummy1 = SR_MASK_LL;
-
- __asm__ __volatile__("getcon " __SR ", %0\n\t"
- "or %0, %1, %0\n\t"
- "putcon %0, " __SR "\n\t"
- : "=&r" (__dummy0)
- : "r" (__dummy1));
-}
-
-static inline void set_bl_bit(void)
-{
- unsigned long long __dummy0, __dummy1 = SR_BL_LL;
-
- __asm__ __volatile__("getcon " __SR ", %0\n\t"
- "or %0, %1, %0\n\t"
- "putcon %0, " __SR "\n\t"
- : "=&r" (__dummy0)
- : "r" (__dummy1));
-
-}
-
-static inline void clear_bl_bit(void)
-{
- unsigned long long __dummy0, __dummy1 = ~SR_BL_LL;
-
- __asm__ __volatile__("getcon " __SR ", %0\n\t"
- "and %0, %1, %0\n\t"
- "putcon %0, " __SR "\n\t"
- : "=&r" (__dummy0)
- : "r" (__dummy1));
-}
-
-static inline unsigned long __raw_local_save_flags(void)
-{
- unsigned long long __dummy = SR_MASK_LL;
- unsigned long flags;
-
- __asm__ __volatile__ (
- "getcon " __SR ", %0\n\t"
- "and %0, %1, %0"
- : "=&r" (flags)
- : "r" (__dummy));
-
- return flags;
-}
-
-static inline unsigned long __raw_local_irq_save(void)
-{
- unsigned long long __dummy0, __dummy1 = SR_MASK_LL;
- unsigned long flags;
-
- __asm__ __volatile__ (
- "getcon " __SR ", %1\n\t"
- "or %1, r63, %0\n\t"
- "or %1, %2, %1\n\t"
- "putcon %1, " __SR "\n\t"
- "and %0, %2, %0"
- : "=&r" (flags), "=&r" (__dummy0)
- : "r" (__dummy1));
-
- return flags;
-}
-
-#endif /* __ASM_SH_IRQFLAGS_64_H */
diff --git a/arch/sh/include/asm/mmu.h b/arch/sh/include/asm/mmu.h
index f596303..c7426ad 100644
--- a/arch/sh/include/asm/mmu.h
+++ b/arch/sh/include/asm/mmu.h
@@ -7,12 +7,16 @@
#define PMB_PASCR 0xff000070
#define PMB_IRMCR 0xff000078
+#define PASCR_SE 0x80000000
+
#define PMB_ADDR 0xf6100000
#define PMB_DATA 0xf7100000
#define PMB_ENTRY_MAX 16
#define PMB_E_MASK 0x0000000f
#define PMB_E_SHIFT 8
+#define PMB_PFN_MASK 0xff000000
+
#define PMB_SZ_16M 0x00000000
#define PMB_SZ_64M 0x00000010
#define PMB_SZ_128M 0x00000080
@@ -62,17 +66,10 @@
};
/* arch/sh/mm/pmb.c */
-int __set_pmb_entry(unsigned long vpn, unsigned long ppn,
- unsigned long flags, int *entry);
-int set_pmb_entry(struct pmb_entry *pmbe);
-void clear_pmb_entry(struct pmb_entry *pmbe);
-struct pmb_entry *pmb_alloc(unsigned long vpn, unsigned long ppn,
- unsigned long flags);
-void pmb_free(struct pmb_entry *pmbe);
long pmb_remap(unsigned long virt, unsigned long phys,
unsigned long size, unsigned long flags);
void pmb_unmap(unsigned long addr);
+int pmb_init(void);
#endif /* __ASSEMBLY__ */
#endif /* __MMU_H */
-
diff --git a/arch/sh/include/asm/pci.h b/arch/sh/include/asm/pci.h
index 4163950..67f3999 100644
--- a/arch/sh/include/asm/pci.h
+++ b/arch/sh/include/asm/pci.h
@@ -3,8 +3,6 @@
#ifdef __KERNEL__
-#include <linux/dma-mapping.h>
-
/* Can be used to override the logic in pci_scan_bus for skipping
already-configured bus numbers - to be used for buggy BIOSes
or architectures with incomplete PCI setup by the loader */
@@ -54,30 +52,18 @@
* address space. The networking and block device layers use
* this boolean for bounce buffer decisions.
*/
-#define PCI_DMA_BUS_IS_PHYS (1)
-
-#include <linux/types.h>
-#include <linux/slab.h>
-#include <asm/scatterlist.h>
-#include <linux/string.h>
-#include <asm/io.h>
+#define PCI_DMA_BUS_IS_PHYS (dma_ops->is_phys)
/* pci_unmap_{single,page} being a nop depends upon the
* configuration.
*/
-#ifdef CONFIG_SH_PCIDMA_NONCOHERENT
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) \
- dma_addr_t ADDR_NAME;
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) \
- __u32 LEN_NAME;
-#define pci_unmap_addr(PTR, ADDR_NAME) \
- ((PTR)->ADDR_NAME)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) \
- (((PTR)->ADDR_NAME) = (VAL))
-#define pci_unmap_len(PTR, LEN_NAME) \
- ((PTR)->LEN_NAME)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL) \
- (((PTR)->LEN_NAME) = (VAL))
+#ifdef CONFIG_DMA_NONCOHERENT
+#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) dma_addr_t ADDR_NAME;
+#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) __u32 LEN_NAME;
+#define pci_unmap_addr(PTR, ADDR_NAME) ((PTR)->ADDR_NAME)
+#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) (((PTR)->ADDR_NAME) = (VAL))
+#define pci_unmap_len(PTR, LEN_NAME) ((PTR)->LEN_NAME)
+#define pci_unmap_len_set(PTR, LEN_NAME, VAL) (((PTR)->LEN_NAME) = (VAL))
#else
#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
diff --git a/arch/sh/include/asm/perf_event.h b/arch/sh/include/asm/perf_event.h
index 11a3022..3d0c9f3 100644
--- a/arch/sh/include/asm/perf_event.h
+++ b/arch/sh/include/asm/perf_event.h
@@ -1,8 +1,35 @@
#ifndef __ASM_SH_PERF_EVENT_H
#define __ASM_SH_PERF_EVENT_H
-/* SH only supports software events through this interface. */
-static inline void set_perf_event_pending(void) {}
+struct hw_perf_event;
+
+#define MAX_HWEVENTS 2
+
+struct sh_pmu {
+ const char *name;
+ unsigned int num_events;
+ void (*disable_all)(void);
+ void (*enable_all)(void);
+ void (*enable)(struct hw_perf_event *, int);
+ void (*disable)(struct hw_perf_event *, int);
+ u64 (*read)(int);
+ int (*event_map)(int);
+ unsigned int max_events;
+ unsigned long raw_event_mask;
+ const int (*cache_events)[PERF_COUNT_HW_CACHE_MAX]
+ [PERF_COUNT_HW_CACHE_OP_MAX]
+ [PERF_COUNT_HW_CACHE_RESULT_MAX];
+};
+
+/* arch/sh/kernel/perf_event.c */
+extern int register_sh_pmu(struct sh_pmu *);
+extern int reserve_pmc_hardware(void);
+extern void release_pmc_hardware(void);
+
+static inline void set_perf_event_pending(void)
+{
+ /* Nothing to see here, move along. */
+}
#define PERF_EVENT_INDEX_OFFSET 0
diff --git a/arch/sh/include/asm/pgtable.h b/arch/sh/include/asm/pgtable.h
index 4f3efa7..ba3046e 100644
--- a/arch/sh/include/asm/pgtable.h
+++ b/arch/sh/include/asm/pgtable.h
@@ -75,13 +75,31 @@
#define USER_PTRS_PER_PGD (TASK_SIZE/PGDIR_SIZE)
#define FIRST_USER_ADDRESS 0
-#ifdef CONFIG_32BIT
-#define PHYS_ADDR_MASK 0xffffffff
+#define PHYS_ADDR_MASK29 0x1fffffff
+#define PHYS_ADDR_MASK32 0xffffffff
+
+#ifdef CONFIG_PMB
+static inline unsigned long phys_addr_mask(void)
+{
+ /* Is the MMU in 29bit mode? */
+ if (__in_29bit_mode())
+ return PHYS_ADDR_MASK29;
+
+ return PHYS_ADDR_MASK32;
+}
+#elif defined(CONFIG_32BIT)
+static inline unsigned long phys_addr_mask(void)
+{
+ return PHYS_ADDR_MASK32;
+}
#else
-#define PHYS_ADDR_MASK 0x1fffffff
+static inline unsigned long phys_addr_mask(void)
+{
+ return PHYS_ADDR_MASK29;
+}
#endif
-#define PTE_PHYS_MASK (PHYS_ADDR_MASK & PAGE_MASK)
+#define PTE_PHYS_MASK (phys_addr_mask() & PAGE_MASK)
#define PTE_FLAGS_MASK (~(PTE_PHYS_MASK) << PAGE_SHIFT)
#ifdef CONFIG_SUPERH32
diff --git a/arch/sh/include/asm/pgtable_32.h b/arch/sh/include/asm/pgtable_32.h
index c0d359c..b354355 100644
--- a/arch/sh/include/asm/pgtable_32.h
+++ b/arch/sh/include/asm/pgtable_32.h
@@ -108,7 +108,7 @@
#define _PAGE_CLEAR_FLAGS (_PAGE_PROTNONE | _PAGE_ACCESSED | _PAGE_FILE)
#endif
-#define _PAGE_FLAGS_HARDWARE_MASK (PHYS_ADDR_MASK & ~(_PAGE_CLEAR_FLAGS))
+#define _PAGE_FLAGS_HARDWARE_MASK (phys_addr_mask() & ~(_PAGE_CLEAR_FLAGS))
/* Hardware flags, page size encoding */
#if !defined(CONFIG_MMU)
diff --git a/arch/sh/include/asm/processor_32.h b/arch/sh/include/asm/processor_32.h
index 9a87149..1f3d6fa 100644
--- a/arch/sh/include/asm/processor_32.h
+++ b/arch/sh/include/asm/processor_32.h
@@ -56,6 +56,7 @@
#define SR_DSP 0x00001000
#define SR_IMASK 0x000000f0
#define SR_FD 0x00008000
+#define SR_MD 0x40000000
/*
* DSP structure and data
@@ -136,7 +137,7 @@
extern void release_thread(struct task_struct *);
/* Prepare to copy thread state - unlazy all lazy status */
-#define prepare_to_copy(tsk) do { } while (0)
+void prepare_to_copy(struct task_struct *tsk);
/*
* create a kernel thread without removing it from tasklists
diff --git a/arch/sh/include/asm/scatterlist.h b/arch/sh/include/asm/scatterlist.h
index 327cc2e..e38d1d4 100644
--- a/arch/sh/include/asm/scatterlist.h
+++ b/arch/sh/include/asm/scatterlist.h
@@ -1,7 +1,7 @@
#ifndef __ASM_SH_SCATTERLIST_H
#define __ASM_SH_SCATTERLIST_H
-#define ISA_DMA_THRESHOLD PHYS_ADDR_MASK
+#define ISA_DMA_THRESHOLD phys_addr_mask()
#include <asm-generic/scatterlist.h>
diff --git a/arch/sh/include/asm/suspend.h b/arch/sh/include/asm/suspend.h
index 5c8ea28..fe9c2a1 100644
--- a/arch/sh/include/asm/suspend.h
+++ b/arch/sh/include/asm/suspend.h
@@ -2,6 +2,7 @@
#define _ASM_SH_SUSPEND_H
#ifndef __ASSEMBLY__
+#include <linux/notifier.h>
static inline int arch_prepare_suspend(void) { return 0; }
#include <asm/ptrace.h>
@@ -19,6 +20,69 @@
static inline void sh_mobile_setup_cpuidle(void) {}
#endif
+/* notifier chains for pre/post sleep hooks */
+extern struct atomic_notifier_head sh_mobile_pre_sleep_notifier_list;
+extern struct atomic_notifier_head sh_mobile_post_sleep_notifier_list;
+
+/* priority levels for notifiers */
+#define SH_MOBILE_SLEEP_BOARD 0
+#define SH_MOBILE_SLEEP_CPU 1
+#define SH_MOBILE_PRE(x) (x)
+#define SH_MOBILE_POST(x) (-(x))
+
+/* board code registration function for self-refresh assembly snippets */
+void sh_mobile_register_self_refresh(unsigned long flags,
+ void *pre_start, void *pre_end,
+ void *post_start, void *post_end);
+
+/* register structure for address/data information */
+struct sh_sleep_regs {
+ unsigned long stbcr;
+ unsigned long bar;
+
+ /* MMU */
+ unsigned long pteh;
+ unsigned long ptel;
+ unsigned long ttb;
+ unsigned long tea;
+ unsigned long mmucr;
+ unsigned long ptea;
+ unsigned long pascr;
+ unsigned long irmcr;
+
+ /* Cache */
+ unsigned long ccr;
+ unsigned long ramcr;
+};
+
+/* data area for low-level sleep code */
+struct sh_sleep_data {
+ /* current sleep mode (SUSP_SH_...) */
+ unsigned long mode;
+
+ /* addresses of board specific self-refresh snippets */
+ unsigned long sf_pre;
+ unsigned long sf_post;
+
+ /* address of resume code */
+ unsigned long resume;
+
+ /* register state saved and restored by the assembly code */
+ unsigned long vbr;
+ unsigned long spc;
+ unsigned long sr;
+ unsigned long sp;
+
+ /* structure for keeping register addresses */
+ struct sh_sleep_regs addr;
+
+ /* structure for saving/restoring register state */
+ struct sh_sleep_regs data;
+};
+
+/* a bitmap of supported sleep modes (SUSP_SH..) */
+extern unsigned long sh_mobile_sleep_supported;
+
#endif
/* flags passed to assembly suspend code */
@@ -27,5 +91,6 @@
#define SUSP_SH_RSTANDBY (1 << 2) /* SH-Mobile R-standby mode */
#define SUSP_SH_USTANDBY (1 << 3) /* SH-Mobile U-standby mode */
#define SUSP_SH_SF (1 << 4) /* Enable self-refresh */
+#define SUSP_SH_MMU (1 << 5) /* Save/restore MMU and cache */
#endif /* _ASM_SH_SUSPEND_H */
diff --git a/arch/sh/include/asm/system.h b/arch/sh/include/asm/system.h
index b5c5acd..c15415b 100644
--- a/arch/sh/include/asm/system.h
+++ b/arch/sh/include/asm/system.h
@@ -171,10 +171,6 @@
BUILD_TRAP_HANDLER(fpu_state_restore);
BUILD_TRAP_HANDLER(nmi);
-#ifdef CONFIG_BUG
-extern void handle_BUG(struct pt_regs *);
-#endif
-
#define arch_align_stack(x) (x)
struct mem_access {
diff --git a/arch/sh/include/asm/system_32.h b/arch/sh/include/asm/system_32.h
index 607d413..06814f5 100644
--- a/arch/sh/include/asm/system_32.h
+++ b/arch/sh/include/asm/system_32.h
@@ -232,4 +232,33 @@
unsigned long r6, unsigned long r7,
struct pt_regs __regs);
+static inline void set_bl_bit(void)
+{
+ unsigned long __dummy0, __dummy1;
+
+ __asm__ __volatile__ (
+ "stc sr, %0\n\t"
+ "or %2, %0\n\t"
+ "and %3, %0\n\t"
+ "ldc %0, sr\n\t"
+ : "=&r" (__dummy0), "=r" (__dummy1)
+ : "r" (0x10000000), "r" (0xffffff0f)
+ : "memory"
+ );
+}
+
+static inline void clear_bl_bit(void)
+{
+ unsigned long __dummy0, __dummy1;
+
+ __asm__ __volatile__ (
+ "stc sr, %0\n\t"
+ "and %2, %0\n\t"
+ "ldc %0, sr\n\t"
+ : "=&r" (__dummy0), "=r" (__dummy1)
+ : "1" (~0x10000000)
+ : "memory"
+ );
+}
+
#endif /* __ASM_SH_SYSTEM_32_H */
diff --git a/arch/sh/include/asm/system_64.h b/arch/sh/include/asm/system_64.h
index 8e4a03e..ab1dd91 100644
--- a/arch/sh/include/asm/system_64.h
+++ b/arch/sh/include/asm/system_64.h
@@ -12,6 +12,7 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
+#include <cpu/registers.h>
#include <asm/processor.h>
/*
@@ -47,4 +48,29 @@
return (unsigned long long)(signed long long)(signed long)val;
}
+#define SR_BL_LL 0x0000000010000000LL
+
+static inline void set_bl_bit(void)
+{
+ unsigned long long __dummy0, __dummy1 = SR_BL_LL;
+
+ __asm__ __volatile__("getcon " __SR ", %0\n\t"
+ "or %0, %1, %0\n\t"
+ "putcon %0, " __SR "\n\t"
+ : "=&r" (__dummy0)
+ : "r" (__dummy1));
+
+}
+
+static inline void clear_bl_bit(void)
+{
+ unsigned long long __dummy0, __dummy1 = ~SR_BL_LL;
+
+ __asm__ __volatile__("getcon " __SR ", %0\n\t"
+ "and %0, %1, %0\n\t"
+ "putcon %0, " __SR "\n\t"
+ : "=&r" (__dummy0)
+ : "r" (__dummy1));
+}
+
#endif /* __ASM_SH_SYSTEM_64_H */
diff --git a/arch/sh/include/asm/thread_info.h b/arch/sh/include/asm/thread_info.h
index bdeb9d4..1f3d927 100644
--- a/arch/sh/include/asm/thread_info.h
+++ b/arch/sh/include/asm/thread_info.h
@@ -19,6 +19,7 @@
struct task_struct *task; /* main task structure */
struct exec_domain *exec_domain; /* execution domain */
unsigned long flags; /* low level flags */
+ __u32 status; /* thread synchronous flags */
__u32 cpu;
int preempt_count; /* 0 => preemptable, <0 => BUG */
mm_segment_t addr_limit; /* thread address space */
@@ -50,6 +51,7 @@
.task = &tsk, \
.exec_domain = &default_exec_domain, \
.flags = 0, \
+ .status = 0, \
.cpu = 0, \
.preempt_count = INIT_PREEMPT_COUNT, \
.addr_limit = KERNEL_DS, \
@@ -111,13 +113,11 @@
#define TIF_SYSCALL_TRACE 0 /* syscall trace active */
#define TIF_SIGPENDING 1 /* signal pending */
#define TIF_NEED_RESCHED 2 /* rescheduling necessary */
-#define TIF_RESTORE_SIGMASK 3 /* restore signal mask in do_signal() */
#define TIF_SINGLESTEP 4 /* singlestepping active */
#define TIF_SYSCALL_AUDIT 5 /* syscall auditing active */
#define TIF_SECCOMP 6 /* secure computing */
#define TIF_NOTIFY_RESUME 7 /* callback before returning to user */
#define TIF_SYSCALL_TRACEPOINT 8 /* for ftrace syscall instrumentation */
-#define TIF_USEDFPU 16 /* FPU was used by this task this quantum (SMP) */
#define TIF_POLLING_NRFLAG 17 /* true if poll_idle() is polling TIF_NEED_RESCHED */
#define TIF_MEMDIE 18
#define TIF_FREEZE 19 /* Freezing for suspend */
@@ -125,13 +125,11 @@
#define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE)
#define _TIF_SIGPENDING (1 << TIF_SIGPENDING)
#define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED)
-#define _TIF_RESTORE_SIGMASK (1 << TIF_RESTORE_SIGMASK)
#define _TIF_SINGLESTEP (1 << TIF_SINGLESTEP)
#define _TIF_SYSCALL_AUDIT (1 << TIF_SYSCALL_AUDIT)
#define _TIF_SECCOMP (1 << TIF_SECCOMP)
#define _TIF_NOTIFY_RESUME (1 << TIF_NOTIFY_RESUME)
#define _TIF_SYSCALL_TRACEPOINT (1 << TIF_SYSCALL_TRACEPOINT)
-#define _TIF_USEDFPU (1 << TIF_USEDFPU)
#define _TIF_POLLING_NRFLAG (1 << TIF_POLLING_NRFLAG)
#define _TIF_FREEZE (1 << TIF_FREEZE)
@@ -149,13 +147,33 @@
/* work to do on any return to u-space */
#define _TIF_ALLWORK_MASK (_TIF_SYSCALL_TRACE | _TIF_SIGPENDING | \
_TIF_NEED_RESCHED | _TIF_SYSCALL_AUDIT | \
- _TIF_SINGLESTEP | _TIF_RESTORE_SIGMASK | \
- _TIF_NOTIFY_RESUME | _TIF_SYSCALL_TRACEPOINT)
+ _TIF_SINGLESTEP | _TIF_NOTIFY_RESUME | \
+ _TIF_SYSCALL_TRACEPOINT)
/* work to do on interrupt/exception return */
#define _TIF_WORK_MASK (_TIF_ALLWORK_MASK & ~(_TIF_SYSCALL_TRACE | \
_TIF_SYSCALL_AUDIT | _TIF_SINGLESTEP))
+/*
+ * Thread-synchronous status.
+ *
+ * This is different from the flags in that nobody else
+ * ever touches our thread-synchronous status, so we don't
+ * have to worry about atomic accesses.
+ */
+#define TS_RESTORE_SIGMASK 0x0001 /* restore signal mask in do_signal() */
+#define TS_USEDFPU 0x0002 /* FPU used by this task this quantum */
+
+#ifndef __ASSEMBLY__
+#define HAVE_SET_RESTORE_SIGMASK 1
+static inline void set_restore_sigmask(void)
+{
+ struct thread_info *ti = current_thread_info();
+ ti->status |= TS_RESTORE_SIGMASK;
+ set_bit(TIF_SIGPENDING, (unsigned long *)&ti->flags);
+}
+#endif /* !__ASSEMBLY__ */
+
#endif /* __KERNEL__ */
#endif /* __ASM_SH_THREAD_INFO_H */
diff --git a/arch/sh/include/asm/topology.h b/arch/sh/include/asm/topology.h
index 65e7bd2..37cdadd 100644
--- a/arch/sh/include/asm/topology.h
+++ b/arch/sh/include/asm/topology.h
@@ -40,6 +40,14 @@
#endif
+#define mc_capable() (1)
+
+const struct cpumask *cpu_coregroup_mask(unsigned int cpu);
+
+extern cpumask_t cpu_core_map[NR_CPUS];
+
+#define topology_core_cpumask(cpu) (&cpu_core_map[cpu])
+
#include <asm-generic/topology.h>
#endif /* _ASM_SH_TOPOLOGY_H */
diff --git a/arch/sh/include/asm/ubc.h b/arch/sh/include/asm/ubc.h
index 4ca4b77..9bf9616 100644
--- a/arch/sh/include/asm/ubc.h
+++ b/arch/sh/include/asm/ubc.h
@@ -60,16 +60,5 @@
#define BRCR_UBDE (1 << 0)
#endif
-#ifndef __ASSEMBLY__
-/* arch/sh/kernel/cpu/ubc.S */
-extern void ubc_sleep(void);
-
-#ifdef CONFIG_UBC_WAKEUP
-extern void ubc_wakeup(void);
-#else
-#define ubc_wakeup() do { } while (0)
-#endif
-#endif
-
#endif /* __KERNEL__ */
#endif /* __ASM_SH_UBC_H */
diff --git a/arch/sh/include/asm/watchdog.h b/arch/sh/include/asm/watchdog.h
index 2fe7cee..19dfff5 100644
--- a/arch/sh/include/asm/watchdog.h
+++ b/arch/sh/include/asm/watchdog.h
@@ -2,6 +2,8 @@
* include/asm-sh/watchdog.h
*
* Copyright (C) 2002, 2003 Paul Mundt
+ * Copyright (C) 2009 Siemens AG
+ * Copyright (C) 2009 Valentin Sitdikov
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -61,6 +63,61 @@
#define WTCSR_CKS_2048 0x06
#define WTCSR_CKS_4096 0x07
+#if defined(CONFIG_CPU_SUBTYPE_SH7785) || defined(CONFIG_CPU_SUBTYPE_SH7780)
+/**
+ * sh_wdt_read_cnt - Read from Counter
+ * Reads back the WTCNT value.
+ */
+static inline __u32 sh_wdt_read_cnt(void)
+{
+ return ctrl_inl(WTCNT_R);
+}
+
+/**
+ * sh_wdt_write_cnt - Write to Counter
+ * @val: Value to write
+ *
+ * Writes the given value @val to the lower byte of the timer counter.
+ * The upper byte is set manually on each write.
+ */
+static inline void sh_wdt_write_cnt(__u32 val)
+{
+ ctrl_outl((WTCNT_HIGH << 24) | (__u32)val, WTCNT);
+}
+
+/**
+ * sh_wdt_write_bst - Write to Counter
+ * @val: Value to write
+ *
+ * Writes the given value @val to the lower byte of the timer counter.
+ * The upper byte is set manually on each write.
+ */
+static inline void sh_wdt_write_bst(__u32 val)
+{
+ ctrl_outl((WTBST_HIGH << 24) | (__u32)val, WTBST);
+}
+/**
+ * sh_wdt_read_csr - Read from Control/Status Register
+ *
+ * Reads back the WTCSR value.
+ */
+static inline __u32 sh_wdt_read_csr(void)
+{
+ return ctrl_inl(WTCSR_R);
+}
+
+/**
+ * sh_wdt_write_csr - Write to Control/Status Register
+ * @val: Value to write
+ *
+ * Writes the given value @val to the lower byte of the control/status
+ * register. The upper byte is set manually on each write.
+ */
+static inline void sh_wdt_write_csr(__u32 val)
+{
+ ctrl_outl((WTCSR_HIGH << 24) | (__u32)val, WTCSR);
+}
+#else
/**
* sh_wdt_read_cnt - Read from Counter
* Reads back the WTCNT value.
@@ -103,6 +160,6 @@
{
ctrl_outw((WTCSR_HIGH << 8) | (__u16)val, WTCSR);
}
-
+#endif /* CONFIG_CPU_SUBTYPE_SH7785 || CONFIG_CPU_SUBTYPE_SH7780 */
#endif /* __KERNEL__ */
#endif /* __ASM_SH_WATCHDOG_H */
diff --git a/arch/sh/include/cpu-sh4/cpu/watchdog.h b/arch/sh/include/cpu-sh4/cpu/watchdog.h
index 259f6a0..7672301 100644
--- a/arch/sh/include/cpu-sh4/cpu/watchdog.h
+++ b/arch/sh/include/cpu-sh4/cpu/watchdog.h
@@ -2,6 +2,8 @@
* include/asm-sh/cpu-sh4/watchdog.h
*
* Copyright (C) 2002, 2003 Paul Mundt
+ * Copyright (C) 2009 Siemens AG
+ * Copyright (C) 2009 Sitdikov Valentin
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
@@ -10,9 +12,20 @@
#ifndef __ASM_CPU_SH4_WATCHDOG_H
#define __ASM_CPU_SH4_WATCHDOG_H
+#if defined(CONFIG_CPU_SUBTYPE_SH7785) || defined(CONFIG_CPU_SUBTYPE_SH7780)
+/* Prefix definition */
+#define WTBST_HIGH 0x55
+/* Register definitions */
+#define WTCNT_R 0xffcc0010 /*WDTCNT*/
+#define WTCSR 0xffcc0004 /*WDTCSR*/
+#define WTCNT 0xffcc0000 /*WDTST*/
+#define WTST WTCNT
+#define WTBST 0xffcc0008 /*WDTBST*/
+#else
/* Register definitions */
#define WTCNT 0xffc00008
#define WTCSR 0xffc0000c
+#endif
/* Bit definitions */
#define WTCSR_TME 0x80
diff --git a/arch/sh/include/mach-common/mach/titan.h b/arch/sh/include/mach-common/mach/titan.h
index 03f3583..4a674d2 100644
--- a/arch/sh/include/mach-common/mach/titan.h
+++ b/arch/sh/include/mach-common/mach/titan.h
@@ -1,5 +1,5 @@
/*
- * Platform defintions for Titan
+ * Platform definitions for Titan
*/
#ifndef _ASM_SH_TITAN_H
#define _ASM_SH_TITAN_H
diff --git a/arch/sh/include/mach-ecovec24/mach/partner-jet-setup.txt b/arch/sh/include/mach-ecovec24/mach/partner-jet-setup.txt
index 8b8e4fa..cc737b8 100644
--- a/arch/sh/include/mach-ecovec24/mach/partner-jet-setup.txt
+++ b/arch/sh/include/mach-ecovec24/mach/partner-jet-setup.txt
@@ -22,13 +22,12 @@
LIST "setup clocks"
ED 0xa4150024, 0x00004000
ED 0xa4150000, 0x8E003508
-ED 0xa4150004, 0x00000000
WAIT 1
LIST "BSC"
ED 0xff800020, 0xa5a50000
-ED 0xfec10000, 0x00000013
+ED 0xfec10000, 0x00001013
ED 0xfec10004, 0x11110400
ED 0xfec10024, 0x00000440
diff --git a/arch/sh/include/mach-se/mach/se7722.h b/arch/sh/include/mach-se/mach/se7722.h
index e971d9a..16505bf 100644
--- a/arch/sh/include/mach-se/mach/se7722.h
+++ b/arch/sh/include/mach-se/mach/se7722.h
@@ -92,18 +92,11 @@
#define SE7722_FPGA_IRQ_MRSHPC1 3 /* IRQ1 */
#define SE7722_FPGA_IRQ_MRSHPC2 4 /* IRQ1 */
#define SE7722_FPGA_IRQ_MRSHPC3 5 /* IRQ1 */
-
#define SE7722_FPGA_IRQ_NR 6
-#define SE7722_FPGA_IRQ_BASE 110
-
-#define MRSHPC_IRQ3 (SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_MRSHPC3)
-#define MRSHPC_IRQ2 (SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_MRSHPC2)
-#define MRSHPC_IRQ1 (SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_MRSHPC1)
-#define MRSHPC_IRQ0 (SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_MRSHPC0)
-#define SMC_IRQ (SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_SMC)
-#define USB_IRQ (SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_USB)
/* arch/sh/boards/se/7722/irq.c */
+extern unsigned int se7722_fpga_irq[];
+
void init_se7722_IRQ(void);
#define __IO_PREFIX se7722
diff --git a/arch/sh/kernel/Makefile b/arch/sh/kernel/Makefile
index a2d0a40..0471a3e 100644
--- a/arch/sh/kernel/Makefile
+++ b/arch/sh/kernel/Makefile
@@ -9,8 +9,12 @@
CFLAGS_REMOVE_ftrace.o = -pg
endif
-obj-y := debugtraps.o dumpstack.o idle.o io.o io_generic.o irq.o \
- machvec.o nmi_debug.o process_$(BITS).o ptrace_$(BITS).o \
+CFLAGS_REMOVE_return_address.o = -pg
+
+obj-y := debugtraps.o dma-nommu.o dumpstack.o \
+ idle.o io.o io_generic.o irq.o \
+ irq_$(BITS).o machvec.o nmi_debug.o process_$(BITS).o \
+ ptrace_$(BITS).o return_address.o \
setup.o signal_$(BITS).o sys_sh.o sys_sh$(BITS).o \
syscalls_$(BITS).o time.o topology.o traps.o \
traps_$(BITS).o unwinder.o
@@ -28,13 +32,13 @@
obj-$(CONFIG_STACKTRACE) += stacktrace.o
obj-$(CONFIG_IO_TRAPPED) += io_trapped.o
obj-$(CONFIG_KPROBES) += kprobes.o
-obj-$(CONFIG_GENERIC_GPIO) += gpio.o
obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o
obj-$(CONFIG_FTRACE_SYSCALLS) += ftrace.o
obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += ftrace.o
obj-$(CONFIG_DUMP_CODE) += disassemble.o
obj-$(CONFIG_HIBERNATION) += swsusp.o
obj-$(CONFIG_DWARF_UNWINDER) += dwarf.o
+obj-$(CONFIG_PERF_EVENTS) += perf_event.o perf_callchain.o
obj-$(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST) += localtimer.o
diff --git a/arch/sh/kernel/asm-offsets.c b/arch/sh/kernel/asm-offsets.c
index d218e80..08a2be7 100644
--- a/arch/sh/kernel/asm-offsets.c
+++ b/arch/sh/kernel/asm-offsets.c
@@ -34,5 +34,28 @@
DEFINE(PBE_NEXT, offsetof(struct pbe, next));
DEFINE(SWSUSP_ARCH_REGS_SIZE, sizeof(struct swsusp_arch_regs));
#endif
+
+ DEFINE(SH_SLEEP_MODE, offsetof(struct sh_sleep_data, mode));
+ DEFINE(SH_SLEEP_SF_PRE, offsetof(struct sh_sleep_data, sf_pre));
+ DEFINE(SH_SLEEP_SF_POST, offsetof(struct sh_sleep_data, sf_post));
+ DEFINE(SH_SLEEP_RESUME, offsetof(struct sh_sleep_data, resume));
+ DEFINE(SH_SLEEP_VBR, offsetof(struct sh_sleep_data, vbr));
+ DEFINE(SH_SLEEP_SPC, offsetof(struct sh_sleep_data, spc));
+ DEFINE(SH_SLEEP_SR, offsetof(struct sh_sleep_data, sr));
+ DEFINE(SH_SLEEP_SP, offsetof(struct sh_sleep_data, sp));
+ DEFINE(SH_SLEEP_BASE_ADDR, offsetof(struct sh_sleep_data, addr));
+ DEFINE(SH_SLEEP_BASE_DATA, offsetof(struct sh_sleep_data, data));
+ DEFINE(SH_SLEEP_REG_STBCR, offsetof(struct sh_sleep_regs, stbcr));
+ DEFINE(SH_SLEEP_REG_BAR, offsetof(struct sh_sleep_regs, bar));
+ DEFINE(SH_SLEEP_REG_PTEH, offsetof(struct sh_sleep_regs, pteh));
+ DEFINE(SH_SLEEP_REG_PTEL, offsetof(struct sh_sleep_regs, ptel));
+ DEFINE(SH_SLEEP_REG_TTB, offsetof(struct sh_sleep_regs, ttb));
+ DEFINE(SH_SLEEP_REG_TEA, offsetof(struct sh_sleep_regs, tea));
+ DEFINE(SH_SLEEP_REG_MMUCR, offsetof(struct sh_sleep_regs, mmucr));
+ DEFINE(SH_SLEEP_REG_PTEA, offsetof(struct sh_sleep_regs, ptea));
+ DEFINE(SH_SLEEP_REG_PASCR, offsetof(struct sh_sleep_regs, pascr));
+ DEFINE(SH_SLEEP_REG_IRMCR, offsetof(struct sh_sleep_regs, irmcr));
+ DEFINE(SH_SLEEP_REG_CCR, offsetof(struct sh_sleep_regs, ccr));
+ DEFINE(SH_SLEEP_REG_RAMCR, offsetof(struct sh_sleep_regs, ramcr));
return 0;
}
diff --git a/arch/sh/kernel/cpu/Makefile b/arch/sh/kernel/cpu/Makefile
index 3d6b931..d97c803 100644
--- a/arch/sh/kernel/cpu/Makefile
+++ b/arch/sh/kernel/cpu/Makefile
@@ -15,7 +15,6 @@
# Common interfaces.
-obj-$(CONFIG_UBC_WAKEUP) += ubc.o
obj-$(CONFIG_SH_ADC) += adc.o
obj-$(CONFIG_SH_CLK_CPG) += clock-cpg.o
diff --git a/arch/sh/kernel/cpu/init.c b/arch/sh/kernel/cpu/init.c
index e932ebe..89b4b76 100644
--- a/arch/sh/kernel/cpu/init.c
+++ b/arch/sh/kernel/cpu/init.c
@@ -75,16 +75,11 @@
/*
* Future proofing.
*
- * Disable support for slottable sleep instruction
- * and non-nop instructions in the rte delay slot.
+ * Disable support for slottable sleep instruction, non-nop
+ * instructions in the rte delay slot, and associative writes to
+ * the memory-mapped cache array.
*/
- expmask &= ~(EXPMASK_RTEDS | EXPMASK_BRDSSLP);
-
- /*
- * Enable associative writes to the memory-mapped cache array
- * until the cache flush ops have been rewritten.
- */
- expmask |= EXPMASK_MMCAW;
+ expmask &= ~(EXPMASK_RTEDS | EXPMASK_BRDSSLP | EXPMASK_MMCAW);
__raw_writel(expmask, EXPMASK);
ctrl_barrier();
@@ -311,12 +306,12 @@
if (fpu_disabled) {
printk("FPU Disabled\n");
current_cpu_data.flags &= ~CPU_HAS_FPU;
- disable_fpu();
}
/* FPU initialization */
+ disable_fpu();
if ((current_cpu_data.flags & CPU_HAS_FPU)) {
- clear_thread_flag(TIF_USEDFPU);
+ current_thread_info()->status &= ~TS_USEDFPU;
clear_used_math();
}
@@ -338,17 +333,6 @@
}
#endif
- /*
- * Some brain-damaged loaders decided it would be a good idea to put
- * the UBC to sleep. This causes some issues when it comes to things
- * like PTRACE_SINGLESTEP or doing hardware watchpoints in GDB. So ..
- * we wake it up and hope that all is well.
- */
-#ifdef CONFIG_SUPERH32
- if (raw_smp_processor_id() == 0)
- ubc_wakeup();
-#endif
-
speculative_execution_init();
expmask_init();
}
diff --git a/arch/sh/kernel/cpu/sh2a/fpu.c b/arch/sh/kernel/cpu/sh2a/fpu.c
index 6df2fb98..d395ce5 100644
--- a/arch/sh/kernel/cpu/sh2a/fpu.c
+++ b/arch/sh/kernel/cpu/sh2a/fpu.c
@@ -25,14 +25,12 @@
/*
* Save FPU registers onto task structure.
- * Assume called with FPU enabled (SR.FD=0).
*/
void
-save_fpu(struct task_struct *tsk, struct pt_regs *regs)
+save_fpu(struct task_struct *tsk)
{
unsigned long dummy;
- clear_tsk_thread_flag(tsk, TIF_USEDFPU);
enable_fpu();
asm volatile("sts.l fpul, @-%0\n\t"
"sts.l fpscr, @-%0\n\t"
@@ -60,7 +58,6 @@
: "memory");
disable_fpu();
- release_fpu(regs);
}
static void
@@ -598,31 +595,31 @@
struct task_struct *tsk = current;
TRAP_HANDLER_DECL;
- save_fpu(tsk, regs);
+ __unlazy_fpu(tsk, regs);
if (ieee_fpe_handler(regs)) {
tsk->thread.fpu.hard.fpscr &=
~(FPSCR_CAUSE_MASK | FPSCR_FLAG_MASK);
grab_fpu(regs);
restore_fpu(tsk);
- set_tsk_thread_flag(tsk, TIF_USEDFPU);
+ task_thread_info(tsk)->status |= TS_USEDFPU;
return;
}
force_sig(SIGFPE, tsk);
}
-BUILD_TRAP_HANDLER(fpu_state_restore)
+void fpu_state_restore(struct pt_regs *regs)
{
struct task_struct *tsk = current;
- TRAP_HANDLER_DECL;
grab_fpu(regs);
- if (!user_mode(regs)) {
+ if (unlikely(!user_mode(regs))) {
printk(KERN_ERR "BUG: FPU is used in kernel mode.\n");
+ BUG();
return;
}
- if (used_math()) {
+ if (likely(used_math())) {
/* Using the FPU again. */
restore_fpu(tsk);
} else {
@@ -630,5 +627,13 @@
fpu_init();
set_used_math();
}
- set_tsk_thread_flag(tsk, TIF_USEDFPU);
+ task_thread_info(tsk)->status |= TS_USEDFPU;
+ tsk->fpu_counter++;
+}
+
+BUILD_TRAP_HANDLER(fpu_state_restore)
+{
+ TRAP_HANDLER_DECL;
+
+ fpu_state_restore(regs);
}
diff --git a/arch/sh/kernel/cpu/sh3/entry.S b/arch/sh/kernel/cpu/sh3/entry.S
index bb407ef..3f7e2a2 100644
--- a/arch/sh/kernel/cpu/sh3/entry.S
+++ b/arch/sh/kernel/cpu/sh3/entry.S
@@ -297,41 +297,8 @@
!
.balign 256,0,256
general_exception:
-#ifndef CONFIG_CPU_SUBTYPE_SHX3
bra handle_exception
sts pr, k3 ! save original pr value in k3
-#else
- mov.l 1f, k4
- mov.l @k4, k4
-
- ! Is EXPEVT larger than 0x800?
- mov #0x8, k0
- shll8 k0
- cmp/hs k0, k4
- bf 0f
-
- ! then add 0x580 (k2 is 0xd80 or 0xda0)
- mov #0x58, k0
- shll2 k0
- shll2 k0
- add k0, k4
-0:
- ! Setup stack and save DSP context (k0 contains original r15 on return)
- bsr prepare_stack
- nop
-
- ! Save registers / Switch to bank 0
- mov k4, k2 ! keep vector in k2
- mov.l 1f, k4 ! SR bits to clear in k4
- bsr save_regs ! needs original pr value in k3
- nop
-
- bra handle_exception_special
- nop
-
- .align 2
-1: .long EXPEVT
-#endif
! prepare_stack()
! - roll back gRB
diff --git a/arch/sh/kernel/cpu/sh4/Makefile b/arch/sh/kernel/cpu/sh4/Makefile
index 203b183..3a1dbc7 100644
--- a/arch/sh/kernel/cpu/sh4/Makefile
+++ b/arch/sh/kernel/cpu/sh4/Makefile
@@ -9,6 +9,11 @@
obj-$(CONFIG_SH_FPU) += fpu.o softfloat.o
obj-$(CONFIG_SH_STORE_QUEUES) += sq.o
+# Perf events
+perf-$(CONFIG_CPU_SUBTYPE_SH7750) := perf_event.o
+perf-$(CONFIG_CPU_SUBTYPE_SH7750S) := perf_event.o
+perf-$(CONFIG_CPU_SUBTYPE_SH7091) := perf_event.o
+
# CPU subtype setup
obj-$(CONFIG_CPU_SUBTYPE_SH7750) += setup-sh7750.o
obj-$(CONFIG_CPU_SUBTYPE_SH7750R) += setup-sh7750.o
@@ -27,4 +32,5 @@
# Additional clocks by subtype
clock-$(CONFIG_CPU_SUBTYPE_SH4_202) += clock-sh4-202.o
-obj-y += $(clock-y)
+obj-y += $(clock-y)
+obj-$(CONFIG_PERF_EVENTS) += $(perf-y)
diff --git a/arch/sh/kernel/cpu/sh4/fpu.c b/arch/sh/kernel/cpu/sh4/fpu.c
index e3ea541..e97857a 100644
--- a/arch/sh/kernel/cpu/sh4/fpu.c
+++ b/arch/sh/kernel/cpu/sh4/fpu.c
@@ -41,13 +41,11 @@
/*
* Save FPU registers onto task structure.
- * Assume called with FPU enabled (SR.FD=0).
*/
-void save_fpu(struct task_struct *tsk, struct pt_regs *regs)
+void save_fpu(struct task_struct *tsk)
{
unsigned long dummy;
- clear_tsk_thread_flag(tsk, TIF_USEDFPU);
enable_fpu();
asm volatile ("sts.l fpul, @-%0\n\t"
"sts.l fpscr, @-%0\n\t"
@@ -92,7 +90,6 @@
:"memory");
disable_fpu();
- release_fpu(regs);
}
static void restore_fpu(struct task_struct *tsk)
@@ -285,7 +282,6 @@
/* fcnvsd */
struct task_struct *tsk = current;
- save_fpu(tsk, regs);
if ((tsk->thread.fpu.hard.fpscr & FPSCR_CAUSE_ERROR))
/* FPU error */
denormal_to_double(&tsk->thread.fpu.hard,
@@ -462,7 +458,7 @@
struct task_struct *tsk = current;
TRAP_HANDLER_DECL;
- save_fpu(tsk, regs);
+ __unlazy_fpu(tsk, regs);
fpu_exception_flags = 0;
if (ieee_fpe_handler(regs)) {
tsk->thread.fpu.hard.fpscr &=
@@ -473,7 +469,7 @@
tsk->thread.fpu.hard.fpscr |= (fpu_exception_flags >> 10);
grab_fpu(regs);
restore_fpu(tsk);
- set_tsk_thread_flag(tsk, TIF_USEDFPU);
+ task_thread_info(tsk)->status |= TS_USEDFPU;
if ((((tsk->thread.fpu.hard.fpscr & FPSCR_ENABLE_MASK) >> 7) &
(fpu_exception_flags >> 2)) == 0) {
return;
@@ -483,18 +479,18 @@
force_sig(SIGFPE, tsk);
}
-BUILD_TRAP_HANDLER(fpu_state_restore)
+void fpu_state_restore(struct pt_regs *regs)
{
struct task_struct *tsk = current;
- TRAP_HANDLER_DECL;
grab_fpu(regs);
- if (!user_mode(regs)) {
+ if (unlikely(!user_mode(regs))) {
printk(KERN_ERR "BUG: FPU is used in kernel mode.\n");
+ BUG();
return;
}
- if (used_math()) {
+ if (likely(used_math())) {
/* Using the FPU again. */
restore_fpu(tsk);
} else {
@@ -502,5 +498,13 @@
fpu_init();
set_used_math();
}
- set_tsk_thread_flag(tsk, TIF_USEDFPU);
+ task_thread_info(tsk)->status |= TS_USEDFPU;
+ tsk->fpu_counter++;
+}
+
+BUILD_TRAP_HANDLER(fpu_state_restore)
+{
+ TRAP_HANDLER_DECL;
+
+ fpu_state_restore(regs);
}
diff --git a/arch/sh/kernel/cpu/sh4/perf_event.c b/arch/sh/kernel/cpu/sh4/perf_event.c
new file mode 100644
index 0000000..7f9ecc9
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh4/perf_event.c
@@ -0,0 +1,253 @@
+/*
+ * Performance events support for SH7750-style performance counters
+ *
+ * Copyright (C) 2009 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/perf_event.h>
+#include <asm/processor.h>
+
+#define PM_CR_BASE 0xff000084 /* 16-bit */
+#define PM_CTR_BASE 0xff100004 /* 32-bit */
+
+#define PMCR(n) (PM_CR_BASE + ((n) * 0x04))
+#define PMCTRH(n) (PM_CTR_BASE + 0x00 + ((n) * 0x08))
+#define PMCTRL(n) (PM_CTR_BASE + 0x04 + ((n) * 0x08))
+
+#define PMCR_PMM_MASK 0x0000003f
+
+#define PMCR_CLKF 0x00000100
+#define PMCR_PMCLR 0x00002000
+#define PMCR_PMST 0x00004000
+#define PMCR_PMEN 0x00008000
+
+static struct sh_pmu sh7750_pmu;
+
+/*
+ * There are a number of events supported by each counter (33 in total).
+ * Since we have 2 counters, each counter will take the event code as it
+ * corresponds to the PMCR PMM setting. Each counter can be configured
+ * independently.
+ *
+ * Event Code Description
+ * ---------- -----------
+ *
+ * 0x01 Operand read access
+ * 0x02 Operand write access
+ * 0x03 UTLB miss
+ * 0x04 Operand cache read miss
+ * 0x05 Operand cache write miss
+ * 0x06 Instruction fetch (w/ cache)
+ * 0x07 Instruction TLB miss
+ * 0x08 Instruction cache miss
+ * 0x09 All operand accesses
+ * 0x0a All instruction accesses
+ * 0x0b OC RAM operand access
+ * 0x0d On-chip I/O space access
+ * 0x0e Operand access (r/w)
+ * 0x0f Operand cache miss (r/w)
+ * 0x10 Branch instruction
+ * 0x11 Branch taken
+ * 0x12 BSR/BSRF/JSR
+ * 0x13 Instruction execution
+ * 0x14 Instruction execution in parallel
+ * 0x15 FPU Instruction execution
+ * 0x16 Interrupt
+ * 0x17 NMI
+ * 0x18 trapa instruction execution
+ * 0x19 UBCA match
+ * 0x1a UBCB match
+ * 0x21 Instruction cache fill
+ * 0x22 Operand cache fill
+ * 0x23 Elapsed time
+ * 0x24 Pipeline freeze by I-cache miss
+ * 0x25 Pipeline freeze by D-cache miss
+ * 0x27 Pipeline freeze by branch instruction
+ * 0x28 Pipeline freeze by CPU register
+ * 0x29 Pipeline freeze by FPU
+ */
+
+static const int sh7750_general_events[] = {
+ [PERF_COUNT_HW_CPU_CYCLES] = 0x0023,
+ [PERF_COUNT_HW_INSTRUCTIONS] = 0x000a,
+ [PERF_COUNT_HW_CACHE_REFERENCES] = 0x0006, /* I-cache */
+ [PERF_COUNT_HW_CACHE_MISSES] = 0x0008, /* I-cache */
+ [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = 0x0010,
+ [PERF_COUNT_HW_BRANCH_MISSES] = -1,
+ [PERF_COUNT_HW_BUS_CYCLES] = -1,
+};
+
+#define C(x) PERF_COUNT_HW_CACHE_##x
+
+static const int sh7750_cache_events
+ [PERF_COUNT_HW_CACHE_MAX]
+ [PERF_COUNT_HW_CACHE_OP_MAX]
+ [PERF_COUNT_HW_CACHE_RESULT_MAX] =
+{
+ [ C(L1D) ] = {
+ [ C(OP_READ) ] = {
+ [ C(RESULT_ACCESS) ] = 0x0001,
+ [ C(RESULT_MISS) ] = 0x0004,
+ },
+ [ C(OP_WRITE) ] = {
+ [ C(RESULT_ACCESS) ] = 0x0002,
+ [ C(RESULT_MISS) ] = 0x0005,
+ },
+ [ C(OP_PREFETCH) ] = {
+ [ C(RESULT_ACCESS) ] = 0,
+ [ C(RESULT_MISS) ] = 0,
+ },
+ },
+
+ [ C(L1I) ] = {
+ [ C(OP_READ) ] = {
+ [ C(RESULT_ACCESS) ] = 0x0006,
+ [ C(RESULT_MISS) ] = 0x0008,
+ },
+ [ C(OP_WRITE) ] = {
+ [ C(RESULT_ACCESS) ] = -1,
+ [ C(RESULT_MISS) ] = -1,
+ },
+ [ C(OP_PREFETCH) ] = {
+ [ C(RESULT_ACCESS) ] = 0,
+ [ C(RESULT_MISS) ] = 0,
+ },
+ },
+
+ [ C(LL) ] = {
+ [ C(OP_READ) ] = {
+ [ C(RESULT_ACCESS) ] = 0,
+ [ C(RESULT_MISS) ] = 0,
+ },
+ [ C(OP_WRITE) ] = {
+ [ C(RESULT_ACCESS) ] = 0,
+ [ C(RESULT_MISS) ] = 0,
+ },
+ [ C(OP_PREFETCH) ] = {
+ [ C(RESULT_ACCESS) ] = 0,
+ [ C(RESULT_MISS) ] = 0,
+ },
+ },
+
+ [ C(DTLB) ] = {
+ [ C(OP_READ) ] = {
+ [ C(RESULT_ACCESS) ] = 0,
+ [ C(RESULT_MISS) ] = 0x0003,
+ },
+ [ C(OP_WRITE) ] = {
+ [ C(RESULT_ACCESS) ] = 0,
+ [ C(RESULT_MISS) ] = 0,
+ },
+ [ C(OP_PREFETCH) ] = {
+ [ C(RESULT_ACCESS) ] = 0,
+ [ C(RESULT_MISS) ] = 0,
+ },
+ },
+
+ [ C(ITLB) ] = {
+ [ C(OP_READ) ] = {
+ [ C(RESULT_ACCESS) ] = 0,
+ [ C(RESULT_MISS) ] = 0x0007,
+ },
+ [ C(OP_WRITE) ] = {
+ [ C(RESULT_ACCESS) ] = -1,
+ [ C(RESULT_MISS) ] = -1,
+ },
+ [ C(OP_PREFETCH) ] = {
+ [ C(RESULT_ACCESS) ] = -1,
+ [ C(RESULT_MISS) ] = -1,
+ },
+ },
+
+ [ C(BPU) ] = {
+ [ C(OP_READ) ] = {
+ [ C(RESULT_ACCESS) ] = -1,
+ [ C(RESULT_MISS) ] = -1,
+ },
+ [ C(OP_WRITE) ] = {
+ [ C(RESULT_ACCESS) ] = -1,
+ [ C(RESULT_MISS) ] = -1,
+ },
+ [ C(OP_PREFETCH) ] = {
+ [ C(RESULT_ACCESS) ] = -1,
+ [ C(RESULT_MISS) ] = -1,
+ },
+ },
+};
+
+static int sh7750_event_map(int event)
+{
+ return sh7750_general_events[event];
+}
+
+static u64 sh7750_pmu_read(int idx)
+{
+ return (u64)((u64)(__raw_readl(PMCTRH(idx)) & 0xffff) << 32) |
+ __raw_readl(PMCTRL(idx));
+}
+
+static void sh7750_pmu_disable(struct hw_perf_event *hwc, int idx)
+{
+ unsigned int tmp;
+
+ tmp = __raw_readw(PMCR(idx));
+ tmp &= ~(PMCR_PMM_MASK | PMCR_PMEN);
+ __raw_writew(tmp, PMCR(idx));
+}
+
+static void sh7750_pmu_enable(struct hw_perf_event *hwc, int idx)
+{
+ __raw_writew(__raw_readw(PMCR(idx)) | PMCR_PMCLR, PMCR(idx));
+ __raw_writew(hwc->config | PMCR_PMEN | PMCR_PMST, PMCR(idx));
+}
+
+static void sh7750_pmu_disable_all(void)
+{
+ int i;
+
+ for (i = 0; i < sh7750_pmu.num_events; i++)
+ __raw_writew(__raw_readw(PMCR(i)) & ~PMCR_PMEN, PMCR(i));
+}
+
+static void sh7750_pmu_enable_all(void)
+{
+ int i;
+
+ for (i = 0; i < sh7750_pmu.num_events; i++)
+ __raw_writew(__raw_readw(PMCR(i)) | PMCR_PMEN, PMCR(i));
+}
+
+static struct sh_pmu sh7750_pmu = {
+ .name = "SH7750",
+ .num_events = 2,
+ .event_map = sh7750_event_map,
+ .max_events = ARRAY_SIZE(sh7750_general_events),
+ .raw_event_mask = PMCR_PMM_MASK,
+ .cache_events = &sh7750_cache_events,
+ .read = sh7750_pmu_read,
+ .disable = sh7750_pmu_disable,
+ .enable = sh7750_pmu_enable,
+ .disable_all = sh7750_pmu_disable_all,
+ .enable_all = sh7750_pmu_enable_all,
+};
+
+static int __init sh7750_pmu_init(void)
+{
+ /*
+ * Make sure this CPU actually has perf counters.
+ */
+ if (!(boot_cpu_data.flags & CPU_HAS_PERF_COUNTER)) {
+ pr_notice("HW perf events unsupported, software events only.\n");
+ return -ENODEV;
+ }
+
+ return register_sh_pmu(&sh7750_pmu);
+}
+arch_initcall(sh7750_pmu_init);
diff --git a/arch/sh/kernel/cpu/sh4a/Makefile b/arch/sh/kernel/cpu/sh4a/Makefile
index 490d5dc..33bab47 100644
--- a/arch/sh/kernel/cpu/sh4a/Makefile
+++ b/arch/sh/kernel/cpu/sh4a/Makefile
@@ -44,3 +44,4 @@
obj-y += $(clock-y)
obj-$(CONFIG_SMP) += $(smp-y)
obj-$(CONFIG_GENERIC_GPIO) += $(pinmux-y)
+obj-$(CONFIG_PERF_EVENTS) += perf_event.o
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c
index dfe9192..9db7438 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c
@@ -152,7 +152,7 @@
SH_CLK_DIV6("fsia_clk", &div3_clk, FCLKACR, 0),
SH_CLK_DIV6("fsib_clk", &div3_clk, FCLKBCR, 0),
SH_CLK_DIV6("irda_clk", &div3_clk, IRDACLKCR, 0),
- SH_CLK_DIV6("spu_clk", &div3_clk, SPUCLKCR, 0),
+ SH_CLK_DIV6("spu_clk", &div3_clk, SPUCLKCR, CLK_ENABLE_ON_INIT),
};
#define R_CLK (&r_clk)
diff --git a/arch/sh/kernel/cpu/sh4a/perf_event.c b/arch/sh/kernel/cpu/sh4a/perf_event.c
new file mode 100644
index 0000000..eddc219
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh4a/perf_event.c
@@ -0,0 +1,269 @@
+/*
+ * Performance events support for SH-4A performance counters
+ *
+ * Copyright (C) 2009 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/perf_event.h>
+#include <asm/processor.h>
+
+#define PPC_CCBR(idx) (0xff200800 + (sizeof(u32) * idx))
+#define PPC_PMCTR(idx) (0xfc100000 + (sizeof(u32) * idx))
+
+#define CCBR_CIT_MASK (0x7ff << 6)
+#define CCBR_DUC (1 << 3)
+#define CCBR_CMDS (1 << 1)
+#define CCBR_PPCE (1 << 0)
+
+#define PPC_PMCAT 0xfc100080
+
+#define PMCAT_OVF3 (1 << 27)
+#define PMCAT_CNN3 (1 << 26)
+#define PMCAT_CLR3 (1 << 25)
+#define PMCAT_OVF2 (1 << 19)
+#define PMCAT_CLR2 (1 << 17)
+#define PMCAT_OVF1 (1 << 11)
+#define PMCAT_CNN1 (1 << 10)
+#define PMCAT_CLR1 (1 << 9)
+#define PMCAT_OVF0 (1 << 3)
+#define PMCAT_CLR0 (1 << 1)
+
+static struct sh_pmu sh4a_pmu;
+
+/*
+ * Supported raw event codes:
+ *
+ * Event Code Description
+ * ---------- -----------
+ *
+ * 0x0000 number of elapsed cycles
+ * 0x0200 number of elapsed cycles in privileged mode
+ * 0x0280 number of elapsed cycles while SR.BL is asserted
+ * 0x0202 instruction execution
+ * 0x0203 instruction execution in parallel
+ * 0x0204 number of unconditional branches
+ * 0x0208 number of exceptions
+ * 0x0209 number of interrupts
+ * 0x0220 UTLB miss caused by instruction fetch
+ * 0x0222 UTLB miss caused by operand access
+ * 0x02a0 number of ITLB misses
+ * 0x0028 number of accesses to instruction memories
+ * 0x0029 number of accesses to instruction cache
+ * 0x002a instruction cache miss
+ * 0x022e number of access to instruction X/Y memory
+ * 0x0030 number of reads to operand memories
+ * 0x0038 number of writes to operand memories
+ * 0x0031 number of operand cache read accesses
+ * 0x0039 number of operand cache write accesses
+ * 0x0032 operand cache read miss
+ * 0x003a operand cache write miss
+ * 0x0236 number of reads to operand X/Y memory
+ * 0x023e number of writes to operand X/Y memory
+ * 0x0237 number of reads to operand U memory
+ * 0x023f number of writes to operand U memory
+ * 0x0337 number of U memory read buffer misses
+ * 0x02b4 number of wait cycles due to operand read access
+ * 0x02bc number of wait cycles due to operand write access
+ * 0x0033 number of wait cycles due to operand cache read miss
+ * 0x003b number of wait cycles due to operand cache write miss
+ */
+
+/*
+ * Special reserved bits used by hardware emulators, read values will
+ * vary, but writes must always be 0.
+ */
+#define PMCAT_EMU_CLR_MASK ((1 << 24) | (1 << 16) | (1 << 8) | (1 << 0))
+
+static const int sh4a_general_events[] = {
+ [PERF_COUNT_HW_CPU_CYCLES] = 0x0000,
+ [PERF_COUNT_HW_INSTRUCTIONS] = 0x0202,
+ [PERF_COUNT_HW_CACHE_REFERENCES] = 0x0029, /* I-cache */
+ [PERF_COUNT_HW_CACHE_MISSES] = 0x002a, /* I-cache */
+ [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = 0x0204,
+ [PERF_COUNT_HW_BRANCH_MISSES] = -1,
+ [PERF_COUNT_HW_BUS_CYCLES] = -1,
+};
+
+#define C(x) PERF_COUNT_HW_CACHE_##x
+
+static const int sh4a_cache_events
+ [PERF_COUNT_HW_CACHE_MAX]
+ [PERF_COUNT_HW_CACHE_OP_MAX]
+ [PERF_COUNT_HW_CACHE_RESULT_MAX] =
+{
+ [ C(L1D) ] = {
+ [ C(OP_READ) ] = {
+ [ C(RESULT_ACCESS) ] = 0x0031,
+ [ C(RESULT_MISS) ] = 0x0032,
+ },
+ [ C(OP_WRITE) ] = {
+ [ C(RESULT_ACCESS) ] = 0x0039,
+ [ C(RESULT_MISS) ] = 0x003a,
+ },
+ [ C(OP_PREFETCH) ] = {
+ [ C(RESULT_ACCESS) ] = 0,
+ [ C(RESULT_MISS) ] = 0,
+ },
+ },
+
+ [ C(L1I) ] = {
+ [ C(OP_READ) ] = {
+ [ C(RESULT_ACCESS) ] = 0x0029,
+ [ C(RESULT_MISS) ] = 0x002a,
+ },
+ [ C(OP_WRITE) ] = {
+ [ C(RESULT_ACCESS) ] = -1,
+ [ C(RESULT_MISS) ] = -1,
+ },
+ [ C(OP_PREFETCH) ] = {
+ [ C(RESULT_ACCESS) ] = 0,
+ [ C(RESULT_MISS) ] = 0,
+ },
+ },
+
+ [ C(LL) ] = {
+ [ C(OP_READ) ] = {
+ [ C(RESULT_ACCESS) ] = 0x0030,
+ [ C(RESULT_MISS) ] = 0,
+ },
+ [ C(OP_WRITE) ] = {
+ [ C(RESULT_ACCESS) ] = 0x0038,
+ [ C(RESULT_MISS) ] = 0,
+ },
+ [ C(OP_PREFETCH) ] = {
+ [ C(RESULT_ACCESS) ] = 0,
+ [ C(RESULT_MISS) ] = 0,
+ },
+ },
+
+ [ C(DTLB) ] = {
+ [ C(OP_READ) ] = {
+ [ C(RESULT_ACCESS) ] = 0x0222,
+ [ C(RESULT_MISS) ] = 0x0220,
+ },
+ [ C(OP_WRITE) ] = {
+ [ C(RESULT_ACCESS) ] = 0,
+ [ C(RESULT_MISS) ] = 0,
+ },
+ [ C(OP_PREFETCH) ] = {
+ [ C(RESULT_ACCESS) ] = 0,
+ [ C(RESULT_MISS) ] = 0,
+ },
+ },
+
+ [ C(ITLB) ] = {
+ [ C(OP_READ) ] = {
+ [ C(RESULT_ACCESS) ] = 0,
+ [ C(RESULT_MISS) ] = 0x02a0,
+ },
+ [ C(OP_WRITE) ] = {
+ [ C(RESULT_ACCESS) ] = -1,
+ [ C(RESULT_MISS) ] = -1,
+ },
+ [ C(OP_PREFETCH) ] = {
+ [ C(RESULT_ACCESS) ] = -1,
+ [ C(RESULT_MISS) ] = -1,
+ },
+ },
+
+ [ C(BPU) ] = {
+ [ C(OP_READ) ] = {
+ [ C(RESULT_ACCESS) ] = -1,
+ [ C(RESULT_MISS) ] = -1,
+ },
+ [ C(OP_WRITE) ] = {
+ [ C(RESULT_ACCESS) ] = -1,
+ [ C(RESULT_MISS) ] = -1,
+ },
+ [ C(OP_PREFETCH) ] = {
+ [ C(RESULT_ACCESS) ] = -1,
+ [ C(RESULT_MISS) ] = -1,
+ },
+ },
+};
+
+static int sh4a_event_map(int event)
+{
+ return sh4a_general_events[event];
+}
+
+static u64 sh4a_pmu_read(int idx)
+{
+ return __raw_readl(PPC_PMCTR(idx));
+}
+
+static void sh4a_pmu_disable(struct hw_perf_event *hwc, int idx)
+{
+ unsigned int tmp;
+
+ tmp = __raw_readl(PPC_CCBR(idx));
+ tmp &= ~(CCBR_CIT_MASK | CCBR_DUC);
+ __raw_writel(tmp, PPC_CCBR(idx));
+}
+
+static void sh4a_pmu_enable(struct hw_perf_event *hwc, int idx)
+{
+ unsigned int tmp;
+
+ tmp = __raw_readl(PPC_PMCAT);
+ tmp &= ~PMCAT_EMU_CLR_MASK;
+ tmp |= idx ? PMCAT_CLR1 : PMCAT_CLR0;
+ __raw_writel(tmp, PPC_PMCAT);
+
+ tmp = __raw_readl(PPC_CCBR(idx));
+ tmp |= (hwc->config << 6) | CCBR_CMDS | CCBR_PPCE;
+ __raw_writel(tmp, PPC_CCBR(idx));
+
+ __raw_writel(__raw_readl(PPC_CCBR(idx)) | CCBR_DUC, PPC_CCBR(idx));
+}
+
+static void sh4a_pmu_disable_all(void)
+{
+ int i;
+
+ for (i = 0; i < sh4a_pmu.num_events; i++)
+ __raw_writel(__raw_readl(PPC_CCBR(i)) & ~CCBR_DUC, PPC_CCBR(i));
+}
+
+static void sh4a_pmu_enable_all(void)
+{
+ int i;
+
+ for (i = 0; i < sh4a_pmu.num_events; i++)
+ __raw_writel(__raw_readl(PPC_CCBR(i)) | CCBR_DUC, PPC_CCBR(i));
+}
+
+static struct sh_pmu sh4a_pmu = {
+ .name = "SH-4A",
+ .num_events = 2,
+ .event_map = sh4a_event_map,
+ .max_events = ARRAY_SIZE(sh4a_general_events),
+ .raw_event_mask = 0x3ff,
+ .cache_events = &sh4a_cache_events,
+ .read = sh4a_pmu_read,
+ .disable = sh4a_pmu_disable,
+ .enable = sh4a_pmu_enable,
+ .disable_all = sh4a_pmu_disable_all,
+ .enable_all = sh4a_pmu_enable_all,
+};
+
+static int __init sh4a_pmu_init(void)
+{
+ /*
+ * Make sure this CPU actually has perf counters.
+ */
+ if (!(boot_cpu_data.flags & CPU_HAS_PERF_COUNTER)) {
+ pr_notice("HW perf events unsupported, software events only.\n");
+ return -ENODEV;
+ }
+
+ return register_sh_pmu(&sh4a_pmu);
+}
+arch_initcall(sh4a_pmu_init);
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7724.c b/arch/sh/kernel/cpu/sh4a/setup-sh7724.c
index f3851fd..845e89c 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7724.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7724.c
@@ -20,6 +20,8 @@
#include <linux/uio_driver.h>
#include <linux/sh_timer.h>
#include <linux/io.h>
+#include <linux/notifier.h>
+#include <asm/suspend.h>
#include <asm/clock.h>
#include <asm/mmzone.h>
#include <cpu/sh7724.h>
@@ -202,7 +204,7 @@
[0] = {
.name = "VEU3F0",
.start = 0xfe920000,
- .end = 0xfe9200cb - 1,
+ .end = 0xfe9200cb,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -234,7 +236,7 @@
[0] = {
.name = "VEU3F1",
.start = 0xfe924000,
- .end = 0xfe9240cb - 1,
+ .end = 0xfe9240cb,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -523,6 +525,70 @@
},
};
+/* SPU2DSP0 */
+static struct uio_info spu0_platform_data = {
+ .name = "SPU2DSP0",
+ .version = "0",
+ .irq = 86,
+};
+
+static struct resource spu0_resources[] = {
+ [0] = {
+ .name = "SPU2DSP0",
+ .start = 0xFE200000,
+ .end = 0xFE2FFFFF,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ /* place holder for contiguous memory */
+ },
+};
+
+static struct platform_device spu0_device = {
+ .name = "uio_pdrv_genirq",
+ .id = 4,
+ .dev = {
+ .platform_data = &spu0_platform_data,
+ },
+ .resource = spu0_resources,
+ .num_resources = ARRAY_SIZE(spu0_resources),
+ .archdata = {
+ .hwblk_id = HWBLK_SPU,
+ },
+};
+
+/* SPU2DSP1 */
+static struct uio_info spu1_platform_data = {
+ .name = "SPU2DSP1",
+ .version = "0",
+ .irq = 87,
+};
+
+static struct resource spu1_resources[] = {
+ [0] = {
+ .name = "SPU2DSP1",
+ .start = 0xFE300000,
+ .end = 0xFE3FFFFF,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ /* place holder for contiguous memory */
+ },
+};
+
+static struct platform_device spu1_device = {
+ .name = "uio_pdrv_genirq",
+ .id = 5,
+ .dev = {
+ .platform_data = &spu1_platform_data,
+ },
+ .resource = spu1_resources,
+ .num_resources = ARRAY_SIZE(spu1_resources),
+ .archdata = {
+ .hwblk_id = HWBLK_SPU,
+ },
+};
+
static struct platform_device *sh7724_devices[] __initdata = {
&cmt_device,
&tmu0_device,
@@ -539,6 +605,8 @@
&veu0_device,
&veu1_device,
&jpu_device,
+ &spu0_device,
+ &spu1_device,
};
static int __init sh7724_devices_setup(void)
@@ -547,6 +615,8 @@
platform_resource_setup_memory(&veu0_device, "veu0", 2 << 20);
platform_resource_setup_memory(&veu1_device, "veu1", 2 << 20);
platform_resource_setup_memory(&jpu_device, "jpu", 2 << 20);
+ platform_resource_setup_memory(&spu0_device, "spu0", 2 << 20);
+ platform_resource_setup_memory(&spu1_device, "spu1", 2 << 20);
return platform_add_devices(sh7724_devices,
ARRAY_SIZE(sh7724_devices));
@@ -827,3 +897,193 @@
{
register_intc_controller(&intc_desc);
}
+
+static struct {
+ /* BSC */
+ unsigned long mmselr;
+ unsigned long cs0bcr;
+ unsigned long cs4bcr;
+ unsigned long cs5abcr;
+ unsigned long cs5bbcr;
+ unsigned long cs6abcr;
+ unsigned long cs6bbcr;
+ unsigned long cs4wcr;
+ unsigned long cs5awcr;
+ unsigned long cs5bwcr;
+ unsigned long cs6awcr;
+ unsigned long cs6bwcr;
+ /* INTC */
+ unsigned short ipra;
+ unsigned short iprb;
+ unsigned short iprc;
+ unsigned short iprd;
+ unsigned short ipre;
+ unsigned short iprf;
+ unsigned short iprg;
+ unsigned short iprh;
+ unsigned short ipri;
+ unsigned short iprj;
+ unsigned short iprk;
+ unsigned short iprl;
+ unsigned char imr0;
+ unsigned char imr1;
+ unsigned char imr2;
+ unsigned char imr3;
+ unsigned char imr4;
+ unsigned char imr5;
+ unsigned char imr6;
+ unsigned char imr7;
+ unsigned char imr8;
+ unsigned char imr9;
+ unsigned char imr10;
+ unsigned char imr11;
+ unsigned char imr12;
+ /* RWDT */
+ unsigned short rwtcnt;
+ unsigned short rwtcsr;
+ /* CPG */
+ unsigned long irdaclk;
+ unsigned long spuclk;
+} sh7724_rstandby_state;
+
+static int sh7724_pre_sleep_notifier_call(struct notifier_block *nb,
+ unsigned long flags, void *unused)
+{
+ if (!(flags & SUSP_SH_RSTANDBY))
+ return NOTIFY_DONE;
+
+ /* BCR */
+ sh7724_rstandby_state.mmselr = __raw_readl(0xff800020); /* MMSELR */
+ sh7724_rstandby_state.mmselr |= 0xa5a50000;
+ sh7724_rstandby_state.cs0bcr = __raw_readl(0xfec10004); /* CS0BCR */
+ sh7724_rstandby_state.cs4bcr = __raw_readl(0xfec10010); /* CS4BCR */
+ sh7724_rstandby_state.cs5abcr = __raw_readl(0xfec10014); /* CS5ABCR */
+ sh7724_rstandby_state.cs5bbcr = __raw_readl(0xfec10018); /* CS5BBCR */
+ sh7724_rstandby_state.cs6abcr = __raw_readl(0xfec1001c); /* CS6ABCR */
+ sh7724_rstandby_state.cs6bbcr = __raw_readl(0xfec10020); /* CS6BBCR */
+ sh7724_rstandby_state.cs4wcr = __raw_readl(0xfec10030); /* CS4WCR */
+ sh7724_rstandby_state.cs5awcr = __raw_readl(0xfec10034); /* CS5AWCR */
+ sh7724_rstandby_state.cs5bwcr = __raw_readl(0xfec10038); /* CS5BWCR */
+ sh7724_rstandby_state.cs6awcr = __raw_readl(0xfec1003c); /* CS6AWCR */
+ sh7724_rstandby_state.cs6bwcr = __raw_readl(0xfec10040); /* CS6BWCR */
+
+ /* INTC */
+ sh7724_rstandby_state.ipra = __raw_readw(0xa4080000); /* IPRA */
+ sh7724_rstandby_state.iprb = __raw_readw(0xa4080004); /* IPRB */
+ sh7724_rstandby_state.iprc = __raw_readw(0xa4080008); /* IPRC */
+ sh7724_rstandby_state.iprd = __raw_readw(0xa408000c); /* IPRD */
+ sh7724_rstandby_state.ipre = __raw_readw(0xa4080010); /* IPRE */
+ sh7724_rstandby_state.iprf = __raw_readw(0xa4080014); /* IPRF */
+ sh7724_rstandby_state.iprg = __raw_readw(0xa4080018); /* IPRG */
+ sh7724_rstandby_state.iprh = __raw_readw(0xa408001c); /* IPRH */
+ sh7724_rstandby_state.ipri = __raw_readw(0xa4080020); /* IPRI */
+ sh7724_rstandby_state.iprj = __raw_readw(0xa4080024); /* IPRJ */
+ sh7724_rstandby_state.iprk = __raw_readw(0xa4080028); /* IPRK */
+ sh7724_rstandby_state.iprl = __raw_readw(0xa408002c); /* IPRL */
+ sh7724_rstandby_state.imr0 = __raw_readb(0xa4080080); /* IMR0 */
+ sh7724_rstandby_state.imr1 = __raw_readb(0xa4080084); /* IMR1 */
+ sh7724_rstandby_state.imr2 = __raw_readb(0xa4080088); /* IMR2 */
+ sh7724_rstandby_state.imr3 = __raw_readb(0xa408008c); /* IMR3 */
+ sh7724_rstandby_state.imr4 = __raw_readb(0xa4080090); /* IMR4 */
+ sh7724_rstandby_state.imr5 = __raw_readb(0xa4080094); /* IMR5 */
+ sh7724_rstandby_state.imr6 = __raw_readb(0xa4080098); /* IMR6 */
+ sh7724_rstandby_state.imr7 = __raw_readb(0xa408009c); /* IMR7 */
+ sh7724_rstandby_state.imr8 = __raw_readb(0xa40800a0); /* IMR8 */
+ sh7724_rstandby_state.imr9 = __raw_readb(0xa40800a4); /* IMR9 */
+ sh7724_rstandby_state.imr10 = __raw_readb(0xa40800a8); /* IMR10 */
+ sh7724_rstandby_state.imr11 = __raw_readb(0xa40800ac); /* IMR11 */
+ sh7724_rstandby_state.imr12 = __raw_readb(0xa40800b0); /* IMR12 */
+
+ /* RWDT */
+ sh7724_rstandby_state.rwtcnt = __raw_readb(0xa4520000); /* RWTCNT */
+ sh7724_rstandby_state.rwtcnt |= 0x5a00;
+ sh7724_rstandby_state.rwtcsr = __raw_readb(0xa4520004); /* RWTCSR */
+ sh7724_rstandby_state.rwtcsr |= 0xa500;
+ __raw_writew(sh7724_rstandby_state.rwtcsr & 0x07, 0xa4520004);
+
+ /* CPG */
+ sh7724_rstandby_state.irdaclk = __raw_readl(0xa4150018); /* IRDACLKCR */
+ sh7724_rstandby_state.spuclk = __raw_readl(0xa415003c); /* SPUCLKCR */
+
+ return NOTIFY_DONE;
+}
+
+static int sh7724_post_sleep_notifier_call(struct notifier_block *nb,
+ unsigned long flags, void *unused)
+{
+ if (!(flags & SUSP_SH_RSTANDBY))
+ return NOTIFY_DONE;
+
+ /* BCR */
+ __raw_writel(sh7724_rstandby_state.mmselr, 0xff800020); /* MMSELR */
+ __raw_writel(sh7724_rstandby_state.cs0bcr, 0xfec10004); /* CS0BCR */
+ __raw_writel(sh7724_rstandby_state.cs4bcr, 0xfec10010); /* CS4BCR */
+ __raw_writel(sh7724_rstandby_state.cs5abcr, 0xfec10014); /* CS5ABCR */
+ __raw_writel(sh7724_rstandby_state.cs5bbcr, 0xfec10018); /* CS5BBCR */
+ __raw_writel(sh7724_rstandby_state.cs6abcr, 0xfec1001c); /* CS6ABCR */
+ __raw_writel(sh7724_rstandby_state.cs6bbcr, 0xfec10020); /* CS6BBCR */
+ __raw_writel(sh7724_rstandby_state.cs4wcr, 0xfec10030); /* CS4WCR */
+ __raw_writel(sh7724_rstandby_state.cs5awcr, 0xfec10034); /* CS5AWCR */
+ __raw_writel(sh7724_rstandby_state.cs5bwcr, 0xfec10038); /* CS5BWCR */
+ __raw_writel(sh7724_rstandby_state.cs6awcr, 0xfec1003c); /* CS6AWCR */
+ __raw_writel(sh7724_rstandby_state.cs6bwcr, 0xfec10040); /* CS6BWCR */
+
+ /* INTC */
+ __raw_writew(sh7724_rstandby_state.ipra, 0xa4080000); /* IPRA */
+ __raw_writew(sh7724_rstandby_state.iprb, 0xa4080004); /* IPRB */
+ __raw_writew(sh7724_rstandby_state.iprc, 0xa4080008); /* IPRC */
+ __raw_writew(sh7724_rstandby_state.iprd, 0xa408000c); /* IPRD */
+ __raw_writew(sh7724_rstandby_state.ipre, 0xa4080010); /* IPRE */
+ __raw_writew(sh7724_rstandby_state.iprf, 0xa4080014); /* IPRF */
+ __raw_writew(sh7724_rstandby_state.iprg, 0xa4080018); /* IPRG */
+ __raw_writew(sh7724_rstandby_state.iprh, 0xa408001c); /* IPRH */
+ __raw_writew(sh7724_rstandby_state.ipri, 0xa4080020); /* IPRI */
+ __raw_writew(sh7724_rstandby_state.iprj, 0xa4080024); /* IPRJ */
+ __raw_writew(sh7724_rstandby_state.iprk, 0xa4080028); /* IPRK */
+ __raw_writew(sh7724_rstandby_state.iprl, 0xa408002c); /* IPRL */
+ __raw_writeb(sh7724_rstandby_state.imr0, 0xa4080080); /* IMR0 */
+ __raw_writeb(sh7724_rstandby_state.imr1, 0xa4080084); /* IMR1 */
+ __raw_writeb(sh7724_rstandby_state.imr2, 0xa4080088); /* IMR2 */
+ __raw_writeb(sh7724_rstandby_state.imr3, 0xa408008c); /* IMR3 */
+ __raw_writeb(sh7724_rstandby_state.imr4, 0xa4080090); /* IMR4 */
+ __raw_writeb(sh7724_rstandby_state.imr5, 0xa4080094); /* IMR5 */
+ __raw_writeb(sh7724_rstandby_state.imr6, 0xa4080098); /* IMR6 */
+ __raw_writeb(sh7724_rstandby_state.imr7, 0xa408009c); /* IMR7 */
+ __raw_writeb(sh7724_rstandby_state.imr8, 0xa40800a0); /* IMR8 */
+ __raw_writeb(sh7724_rstandby_state.imr9, 0xa40800a4); /* IMR9 */
+ __raw_writeb(sh7724_rstandby_state.imr10, 0xa40800a8); /* IMR10 */
+ __raw_writeb(sh7724_rstandby_state.imr11, 0xa40800ac); /* IMR11 */
+ __raw_writeb(sh7724_rstandby_state.imr12, 0xa40800b0); /* IMR12 */
+
+ /* RWDT */
+ __raw_writew(sh7724_rstandby_state.rwtcnt, 0xa4520000); /* RWTCNT */
+ __raw_writew(sh7724_rstandby_state.rwtcsr, 0xa4520004); /* RWTCSR */
+
+ /* CPG */
+ __raw_writel(sh7724_rstandby_state.irdaclk, 0xa4150018); /* IRDACLKCR */
+ __raw_writel(sh7724_rstandby_state.spuclk, 0xa415003c); /* SPUCLKCR */
+
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block sh7724_pre_sleep_notifier = {
+ .notifier_call = sh7724_pre_sleep_notifier_call,
+ .priority = SH_MOBILE_PRE(SH_MOBILE_SLEEP_CPU),
+};
+
+static struct notifier_block sh7724_post_sleep_notifier = {
+ .notifier_call = sh7724_post_sleep_notifier_call,
+ .priority = SH_MOBILE_POST(SH_MOBILE_SLEEP_CPU),
+};
+
+static int __init sh7724_sleep_setup(void)
+{
+ atomic_notifier_chain_register(&sh_mobile_pre_sleep_notifier_list,
+ &sh7724_pre_sleep_notifier);
+
+ atomic_notifier_chain_register(&sh_mobile_post_sleep_notifier_list,
+ &sh7724_post_sleep_notifier);
+ return 0;
+}
+arch_initcall(sh7724_sleep_setup);
+
diff --git a/arch/sh/kernel/cpu/sh4a/setup-shx3.c b/arch/sh/kernel/cpu/sh4a/setup-shx3.c
index e848443..c7ba916 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-shx3.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-shx3.c
@@ -15,6 +15,15 @@
#include <linux/sh_timer.h>
#include <asm/mmzone.h>
+/*
+ * This intentionally only registers SCIF ports 0, 1, and 3. SCIF 2
+ * INTEVT values overlap with the FPU EXPEVT ones, requiring special
+ * demuxing in the exception dispatch path.
+ *
+ * As this overlap is something that never should have made it in to
+ * silicon in the first place, we just refuse to deal with the port at
+ * all rather than adding infrastructure to hack around it.
+ */
static struct plat_sci_port sci_platform_data[] = {
{
.mapbase = 0xffc30000,
@@ -27,11 +36,6 @@
.type = PORT_SCIF,
.irqs = { 44, 45, 47, 46 },
}, {
- .mapbase = 0xffc50000,
- .flags = UPF_BOOT_AUTOCONF,
- .type = PORT_SCIF,
- .irqs = { 48, 49, 51, 50 },
- }, {
.mapbase = 0xffc60000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
@@ -268,7 +272,11 @@
UNUSED = 0,
/* interrupt sources */
- IRL, IRQ0, IRQ1, IRQ2, IRQ3,
+ IRL_LLLL, IRL_LLLH, IRL_LLHL, IRL_LLHH,
+ IRL_LHLL, IRL_LHLH, IRL_LHHL, IRL_LHHH,
+ IRL_HLLL, IRL_HLLH, IRL_HLHL, IRL_HLHH,
+ IRL_HHLL, IRL_HHLH, IRL_HHHL,
+ IRQ0, IRQ1, IRQ2, IRQ3,
HUDII,
TMU0, TMU1, TMU2, TMU3, TMU4, TMU5,
PCII0, PCII1, PCII2, PCII3, PCII4,
@@ -291,7 +299,7 @@
INTICI4, INTICI5, INTICI6, INTICI7,
/* interrupt groups */
- PCII56789, SCIF0, SCIF1, SCIF2, SCIF3,
+ IRL, PCII56789, SCIF0, SCIF1, SCIF2, SCIF3,
DMAC0, DMAC1,
};
@@ -309,8 +317,6 @@
INTC_VECT(SCIF0_BRI, 0x740), INTC_VECT(SCIF0_TXI, 0x760),
INTC_VECT(SCIF1_ERI, 0x780), INTC_VECT(SCIF1_RXI, 0x7a0),
INTC_VECT(SCIF1_BRI, 0x7c0), INTC_VECT(SCIF1_TXI, 0x7e0),
- INTC_VECT(SCIF2_ERI, 0x800), INTC_VECT(SCIF2_RXI, 0x820),
- INTC_VECT(SCIF2_BRI, 0x840), INTC_VECT(SCIF2_TXI, 0x860),
INTC_VECT(SCIF3_ERI, 0x880), INTC_VECT(SCIF3_RXI, 0x8a0),
INTC_VECT(SCIF3_BRI, 0x8c0), INTC_VECT(SCIF3_TXI, 0x8e0),
INTC_VECT(DMAC0_DMINT0, 0x900), INTC_VECT(DMAC0_DMINT1, 0x920),
@@ -344,10 +350,13 @@
};
static struct intc_group groups[] __initdata = {
+ INTC_GROUP(IRL, IRL_LLLL, IRL_LLLH, IRL_LLHL, IRL_LLHH,
+ IRL_LHLL, IRL_LHLH, IRL_LHHL, IRL_LHHH,
+ IRL_HLLL, IRL_HLLH, IRL_HLHL, IRL_HLHH,
+ IRL_HHLL, IRL_HHLH, IRL_HHHL),
INTC_GROUP(PCII56789, PCII5, PCII6, PCII7, PCII8, PCII9),
INTC_GROUP(SCIF0, SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI),
INTC_GROUP(SCIF1, SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI),
- INTC_GROUP(SCIF2, SCIF2_ERI, SCIF2_RXI, SCIF2_BRI, SCIF2_TXI),
INTC_GROUP(SCIF3, SCIF3_ERI, SCIF3_RXI, SCIF3_BRI, SCIF3_TXI),
INTC_GROUP(DMAC0, DMAC0_DMINT0, DMAC0_DMINT1, DMAC0_DMINT2,
DMAC0_DMINT3, DMAC0_DMINT4, DMAC0_DMINT5, DMAC0_DMAE),
@@ -419,14 +428,14 @@
/* External interrupt pins in IRL mode */
static struct intc_vect vectors_irl[] __initdata = {
- INTC_VECT(IRL, 0x200), INTC_VECT(IRL, 0x220),
- INTC_VECT(IRL, 0x240), INTC_VECT(IRL, 0x260),
- INTC_VECT(IRL, 0x280), INTC_VECT(IRL, 0x2a0),
- INTC_VECT(IRL, 0x2c0), INTC_VECT(IRL, 0x2e0),
- INTC_VECT(IRL, 0x300), INTC_VECT(IRL, 0x320),
- INTC_VECT(IRL, 0x340), INTC_VECT(IRL, 0x360),
- INTC_VECT(IRL, 0x380), INTC_VECT(IRL, 0x3a0),
- INTC_VECT(IRL, 0x3c0),
+ INTC_VECT(IRL_LLLL, 0x200), INTC_VECT(IRL_LLLH, 0x220),
+ INTC_VECT(IRL_LLHL, 0x240), INTC_VECT(IRL_LLHH, 0x260),
+ INTC_VECT(IRL_LHLL, 0x280), INTC_VECT(IRL_LHLH, 0x2a0),
+ INTC_VECT(IRL_LHHL, 0x2c0), INTC_VECT(IRL_LHHH, 0x2e0),
+ INTC_VECT(IRL_HLLL, 0x300), INTC_VECT(IRL_HLLH, 0x320),
+ INTC_VECT(IRL_HLHL, 0x340), INTC_VECT(IRL_HLHH, 0x360),
+ INTC_VECT(IRL_HHLL, 0x380), INTC_VECT(IRL_HHLH, 0x3a0),
+ INTC_VECT(IRL_HHHL, 0x3c0),
};
static DECLARE_INTC_DESC(intc_desc_irl, "shx3-irl", vectors_irl, groups,
diff --git a/arch/sh/kernel/cpu/sh4a/smp-shx3.c b/arch/sh/kernel/cpu/sh4a/smp-shx3.c
index 185ec39..5863e0c 100644
--- a/arch/sh/kernel/cpu/sh4a/smp-shx3.c
+++ b/arch/sh/kernel/cpu/sh4a/smp-shx3.c
@@ -14,6 +14,13 @@
#include <linux/interrupt.h>
#include <linux/io.h>
+#define STBCR_REG(phys_id) (0xfe400004 | (phys_id << 12))
+#define RESET_REG(phys_id) (0xfe400008 | (phys_id << 12))
+
+#define STBCR_MSTP 0x00000001
+#define STBCR_RESET 0x00000002
+#define STBCR_LTSLP 0x80000000
+
static irqreturn_t ipi_interrupt_handler(int irq, void *arg)
{
unsigned int message = (unsigned int)(long)arg;
@@ -21,9 +28,9 @@
unsigned int offs = 4 * cpu;
unsigned int x;
- x = ctrl_inl(0xfe410070 + offs); /* C0INITICI..CnINTICI */
+ x = __raw_readl(0xfe410070 + offs); /* C0INITICI..CnINTICI */
x &= (1 << (message << 2));
- ctrl_outl(x, 0xfe410080 + offs); /* C0INTICICLR..CnINTICICLR */
+ __raw_writel(x, 0xfe410080 + offs); /* C0INTICICLR..CnINTICICLR */
smp_message_recv(message);
@@ -37,6 +44,9 @@
init_cpu_possible(cpumask_of(cpu));
+ /* Enable light sleep for the boot CPU */
+ __raw_writel(__raw_readl(STBCR_REG(cpu)) | STBCR_LTSLP, STBCR_REG(cpu));
+
__cpu_number_map[0] = 0;
__cpu_logical_map[0] = 0;
@@ -66,32 +76,23 @@
"IPI", (void *)(long)i);
}
-#define STBCR_REG(phys_id) (0xfe400004 | (phys_id << 12))
-#define RESET_REG(phys_id) (0xfe400008 | (phys_id << 12))
-
-#define STBCR_MSTP 0x00000001
-#define STBCR_RESET 0x00000002
-#define STBCR_LTSLP 0x80000000
-
-#define STBCR_AP_VAL (STBCR_RESET | STBCR_LTSLP)
-
void plat_start_cpu(unsigned int cpu, unsigned long entry_point)
{
- ctrl_outl(entry_point, RESET_REG(cpu));
+ __raw_writel(entry_point, RESET_REG(cpu));
- if (!(ctrl_inl(STBCR_REG(cpu)) & STBCR_MSTP))
- ctrl_outl(STBCR_MSTP, STBCR_REG(cpu));
+ if (!(__raw_readl(STBCR_REG(cpu)) & STBCR_MSTP))
+ __raw_writel(STBCR_MSTP, STBCR_REG(cpu));
- while (!(ctrl_inl(STBCR_REG(cpu)) & STBCR_MSTP))
+ while (!(__raw_readl(STBCR_REG(cpu)) & STBCR_MSTP))
cpu_relax();
/* Start up secondary processor by sending a reset */
- ctrl_outl(STBCR_AP_VAL, STBCR_REG(cpu));
+ __raw_writel(STBCR_RESET | STBCR_LTSLP, STBCR_REG(cpu));
}
int plat_smp_processor_id(void)
{
- return ctrl_inl(0xff000048); /* CPIDR */
+ return __raw_readl(0xff000048); /* CPIDR */
}
void plat_send_ipi(unsigned int cpu, unsigned int message)
@@ -100,5 +101,5 @@
BUG_ON(cpu >= 4);
- ctrl_outl(1 << (message << 2), addr); /* C0INTICI..CnINTICI */
+ __raw_writel(1 << (message << 2), addr); /* C0INTICI..CnINTICI */
}
diff --git a/arch/sh/kernel/cpu/sh5/entry.S b/arch/sh/kernel/cpu/sh5/entry.S
index b0aacf6..8f13f73 100644
--- a/arch/sh/kernel/cpu/sh5/entry.S
+++ b/arch/sh/kernel/cpu/sh5/entry.S
@@ -933,7 +933,7 @@
pta restore_all, tr1
- movi (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK), r8
+ movi _TIF_SIGPENDING, r8
and r8, r7, r8
pta work_notifysig, tr0
bne r8, ZERO, tr0
diff --git a/arch/sh/kernel/cpu/shmobile/cpuidle.c b/arch/sh/kernel/cpu/shmobile/cpuidle.c
index 1c504bd..83972aa 100644
--- a/arch/sh/kernel/cpu/shmobile/cpuidle.c
+++ b/arch/sh/kernel/cpu/shmobile/cpuidle.c
@@ -87,25 +87,31 @@
dev->safe_state = state;
- state = &dev->states[i++];
- snprintf(state->name, CPUIDLE_NAME_LEN, "C1");
- strncpy(state->desc, "SuperH Sleep Mode [SF]", CPUIDLE_DESC_LEN);
- state->exit_latency = 100;
- state->target_residency = 1 * 2;
- state->power_usage = 1;
- state->flags = 0;
- state->flags |= CPUIDLE_FLAG_TIME_VALID;
- state->enter = cpuidle_sleep_enter;
+ if (sh_mobile_sleep_supported & SUSP_SH_SF) {
+ state = &dev->states[i++];
+ snprintf(state->name, CPUIDLE_NAME_LEN, "C1");
+ strncpy(state->desc, "SuperH Sleep Mode [SF]",
+ CPUIDLE_DESC_LEN);
+ state->exit_latency = 100;
+ state->target_residency = 1 * 2;
+ state->power_usage = 1;
+ state->flags = 0;
+ state->flags |= CPUIDLE_FLAG_TIME_VALID;
+ state->enter = cpuidle_sleep_enter;
+ }
- state = &dev->states[i++];
- snprintf(state->name, CPUIDLE_NAME_LEN, "C2");
- strncpy(state->desc, "SuperH Mobile Standby Mode [SF]", CPUIDLE_DESC_LEN);
- state->exit_latency = 2300;
- state->target_residency = 1 * 2;
- state->power_usage = 1;
- state->flags = 0;
- state->flags |= CPUIDLE_FLAG_TIME_VALID;
- state->enter = cpuidle_sleep_enter;
+ if (sh_mobile_sleep_supported & SUSP_SH_STANDBY) {
+ state = &dev->states[i++];
+ snprintf(state->name, CPUIDLE_NAME_LEN, "C2");
+ strncpy(state->desc, "SuperH Mobile Standby Mode [SF]",
+ CPUIDLE_DESC_LEN);
+ state->exit_latency = 2300;
+ state->target_residency = 1 * 2;
+ state->power_usage = 1;
+ state->flags = 0;
+ state->flags |= CPUIDLE_FLAG_TIME_VALID;
+ state->enter = cpuidle_sleep_enter;
+ }
dev->state_count = i;
diff --git a/arch/sh/kernel/cpu/shmobile/pm.c b/arch/sh/kernel/cpu/shmobile/pm.c
index ee3c2aa..ca029a4 100644
--- a/arch/sh/kernel/cpu/shmobile/pm.c
+++ b/arch/sh/kernel/cpu/shmobile/pm.c
@@ -15,6 +15,13 @@
#include <linux/suspend.h>
#include <asm/suspend.h>
#include <asm/uaccess.h>
+#include <asm/cacheflush.h>
+
+/*
+ * Notifier lists for pre/post sleep notification
+ */
+ATOMIC_NOTIFIER_HEAD(sh_mobile_pre_sleep_notifier_list);
+ATOMIC_NOTIFIER_HEAD(sh_mobile_post_sleep_notifier_list);
/*
* Sleep modes available on SuperH Mobile:
@@ -26,30 +33,105 @@
#define SUSP_MODE_SLEEP (SUSP_SH_SLEEP)
#define SUSP_MODE_SLEEP_SF (SUSP_SH_SLEEP | SUSP_SH_SF)
#define SUSP_MODE_STANDBY_SF (SUSP_SH_STANDBY | SUSP_SH_SF)
+#define SUSP_MODE_RSTANDBY (SUSP_SH_RSTANDBY | SUSP_SH_MMU | SUSP_SH_SF)
+ /*
+ * U-standby mode is unsupported since it needs bootloader hacks
+ */
-/*
- * The following modes are not there yet:
- *
- * R-standby mode is unsupported, but will be added in the future
- * U-standby mode is low priority since it needs bootloader hacks
- */
-
-#define ILRAM_BASE 0xe5200000
-
-extern const unsigned char sh_mobile_standby[];
-extern const unsigned int sh_mobile_standby_size;
+#ifdef CONFIG_CPU_SUBTYPE_SH7724
+#define RAM_BASE 0xfd800000 /* RSMEM */
+#else
+#define RAM_BASE 0xe5200000 /* ILRAM */
+#endif
void sh_mobile_call_standby(unsigned long mode)
{
- void *onchip_mem = (void *)ILRAM_BASE;
- void (*standby_onchip_mem)(unsigned long, unsigned long) = onchip_mem;
+ void *onchip_mem = (void *)RAM_BASE;
+ struct sh_sleep_data *sdp = onchip_mem;
+ void (*standby_onchip_mem)(unsigned long, unsigned long);
+
+ /* code located directly after data structure */
+ standby_onchip_mem = (void *)(sdp + 1);
+
+ atomic_notifier_call_chain(&sh_mobile_pre_sleep_notifier_list,
+ mode, NULL);
+
+ /* flush the caches if MMU flag is set */
+ if (mode & SUSP_SH_MMU)
+ flush_cache_all();
/* Let assembly snippet in on-chip memory handle the rest */
- standby_onchip_mem(mode, ILRAM_BASE);
+ standby_onchip_mem(mode, RAM_BASE);
+
+ atomic_notifier_call_chain(&sh_mobile_post_sleep_notifier_list,
+ mode, NULL);
+}
+
+extern char sh_mobile_sleep_enter_start;
+extern char sh_mobile_sleep_enter_end;
+
+extern char sh_mobile_sleep_resume_start;
+extern char sh_mobile_sleep_resume_end;
+
+unsigned long sh_mobile_sleep_supported = SUSP_SH_SLEEP;
+
+void sh_mobile_register_self_refresh(unsigned long flags,
+ void *pre_start, void *pre_end,
+ void *post_start, void *post_end)
+{
+ void *onchip_mem = (void *)RAM_BASE;
+ void *vp;
+ struct sh_sleep_data *sdp;
+ int n;
+
+ /* part 0: data area */
+ sdp = onchip_mem;
+ sdp->addr.stbcr = 0xa4150020; /* STBCR */
+ sdp->addr.bar = 0xa4150040; /* BAR */
+ sdp->addr.pteh = 0xff000000; /* PTEH */
+ sdp->addr.ptel = 0xff000004; /* PTEL */
+ sdp->addr.ttb = 0xff000008; /* TTB */
+ sdp->addr.tea = 0xff00000c; /* TEA */
+ sdp->addr.mmucr = 0xff000010; /* MMUCR */
+ sdp->addr.ptea = 0xff000034; /* PTEA */
+ sdp->addr.pascr = 0xff000070; /* PASCR */
+ sdp->addr.irmcr = 0xff000078; /* IRMCR */
+ sdp->addr.ccr = 0xff00001c; /* CCR */
+ sdp->addr.ramcr = 0xff000074; /* RAMCR */
+ vp = sdp + 1;
+
+ /* part 1: common code to enter sleep mode */
+ n = &sh_mobile_sleep_enter_end - &sh_mobile_sleep_enter_start;
+ memcpy(vp, &sh_mobile_sleep_enter_start, n);
+ vp += roundup(n, 4);
+
+ /* part 2: board specific code to enter self-refresh mode */
+ n = pre_end - pre_start;
+ memcpy(vp, pre_start, n);
+ sdp->sf_pre = (unsigned long)vp;
+ vp += roundup(n, 4);
+
+ /* part 3: board specific code to resume from self-refresh mode */
+ n = post_end - post_start;
+ memcpy(vp, post_start, n);
+ sdp->sf_post = (unsigned long)vp;
+ vp += roundup(n, 4);
+
+ /* part 4: common code to resume from sleep mode */
+ WARN_ON(vp > (onchip_mem + 0x600));
+ vp = onchip_mem + 0x600; /* located at interrupt vector */
+ n = &sh_mobile_sleep_resume_end - &sh_mobile_sleep_resume_start;
+ memcpy(vp, &sh_mobile_sleep_resume_start, n);
+ sdp->resume = (unsigned long)vp;
+
+ sh_mobile_sleep_supported |= flags;
}
static int sh_pm_enter(suspend_state_t state)
{
+ if (!(sh_mobile_sleep_supported & SUSP_MODE_STANDBY_SF))
+ return -ENXIO;
+
local_irq_disable();
set_bl_bit();
sh_mobile_call_standby(SUSP_MODE_STANDBY_SF);
@@ -65,13 +147,6 @@
static int __init sh_pm_init(void)
{
- void *onchip_mem = (void *)ILRAM_BASE;
-
- /* Copy the assembly snippet to the otherwise ununsed ILRAM */
- memcpy(onchip_mem, sh_mobile_standby, sh_mobile_standby_size);
- wmb();
- ctrl_barrier();
-
suspend_set_ops(&sh_pm_ops);
sh_mobile_setup_cpuidle();
return 0;
diff --git a/arch/sh/kernel/cpu/shmobile/pm_runtime.c b/arch/sh/kernel/cpu/shmobile/pm_runtime.c
index 7c615b1..6dcb816 100644
--- a/arch/sh/kernel/cpu/shmobile/pm_runtime.c
+++ b/arch/sh/kernel/cpu/shmobile/pm_runtime.c
@@ -45,12 +45,14 @@
dev_dbg(d, "__platform_pm_runtime_resume() [%d]\n", hwblk);
- if (d->driver && d->driver->pm && d->driver->pm->runtime_resume) {
+ if (d->driver) {
hwblk_enable(hwblk_info, hwblk);
ret = 0;
if (test_bit(PDEV_ARCHDATA_FLAG_SUSP, &ad->flags)) {
- ret = d->driver->pm->runtime_resume(d);
+ if (d->driver->pm && d->driver->pm->runtime_resume)
+ ret = d->driver->pm->runtime_resume(d);
+
if (!ret)
clear_bit(PDEV_ARCHDATA_FLAG_SUSP, &ad->flags);
else
@@ -73,12 +75,15 @@
dev_dbg(d, "__platform_pm_runtime_suspend() [%d]\n", hwblk);
- if (d->driver && d->driver->pm && d->driver->pm->runtime_suspend) {
+ if (d->driver) {
BUG_ON(!test_bit(PDEV_ARCHDATA_FLAG_IDLE, &ad->flags));
+ ret = 0;
- hwblk_enable(hwblk_info, hwblk);
- ret = d->driver->pm->runtime_suspend(d);
- hwblk_disable(hwblk_info, hwblk);
+ if (d->driver->pm && d->driver->pm->runtime_suspend) {
+ hwblk_enable(hwblk_info, hwblk);
+ ret = d->driver->pm->runtime_suspend(d);
+ hwblk_disable(hwblk_info, hwblk);
+ }
if (!ret) {
set_bit(PDEV_ARCHDATA_FLAG_SUSP, &ad->flags);
diff --git a/arch/sh/kernel/cpu/shmobile/sleep.S b/arch/sh/kernel/cpu/shmobile/sleep.S
index a439e6c..e9dd7fa 100644
--- a/arch/sh/kernel/cpu/shmobile/sleep.S
+++ b/arch/sh/kernel/cpu/shmobile/sleep.S
@@ -20,79 +20,103 @@
* Kernel mode register usage, see entry.S:
* k0 scratch
* k1 scratch
- * k4 scratch
*/
#define k0 r0
#define k1 r1
-#define k4 r4
-/* manage self-refresh and enter standby mode.
+/* manage self-refresh and enter standby mode. must be self-contained.
* this code will be copied to on-chip memory and executed from there.
*/
+ .balign 4
+ENTRY(sh_mobile_sleep_enter_start)
- .balign 4096,0,4096
-ENTRY(sh_mobile_standby)
+ /* save mode flags */
+ mov.l r4, @(SH_SLEEP_MODE, r5)
/* save original vbr */
- stc vbr, r1
- mova saved_vbr, r0
- mov.l r1, @r0
+ stc vbr, r0
+ mov.l r0, @(SH_SLEEP_VBR, r5)
/* point vbr to our on-chip memory page */
ldc r5, vbr
/* save return address */
- mova saved_spc, r0
- sts pr, r5
- mov.l r5, @r0
+ sts pr, r0
+ mov.l r0, @(SH_SLEEP_SPC, r5)
/* save sr */
- mova saved_sr, r0
- stc sr, r5
- mov.l r5, @r0
+ stc sr, r0
+ mov.l r0, @(SH_SLEEP_SR, r5)
- /* save mode flags */
- mova saved_mode, r0
- mov.l r4, @r0
+ /* save sp */
+ mov.l r15, @(SH_SLEEP_SP, r5)
- /* put mode flags in r0 */
- mov r4, r0
+ /* save stbcr */
+ bsr save_register
+ mov #SH_SLEEP_REG_STBCR, r0
+ /* save mmu and cache context if needed */
+ mov.l @(SH_SLEEP_MODE, r5), r0
+ tst #SUSP_SH_MMU, r0
+ bt skip_mmu_save_disable
+
+ /* save mmu state */
+ bsr save_register
+ mov #SH_SLEEP_REG_PTEH, r0
+
+ bsr save_register
+ mov #SH_SLEEP_REG_PTEL, r0
+
+ bsr save_register
+ mov #SH_SLEEP_REG_TTB, r0
+
+ bsr save_register
+ mov #SH_SLEEP_REG_TEA, r0
+
+ bsr save_register
+ mov #SH_SLEEP_REG_MMUCR, r0
+
+ bsr save_register
+ mov #SH_SLEEP_REG_PTEA, r0
+
+ bsr save_register
+ mov #SH_SLEEP_REG_PASCR, r0
+
+ bsr save_register
+ mov #SH_SLEEP_REG_IRMCR, r0
+
+ /* invalidate TLBs and disable the MMU */
+ bsr get_register
+ mov #SH_SLEEP_REG_MMUCR, r0
+ mov #4, r1
+ mov.l r1, @r0
+ icbi @r0
+
+ /* save cache registers and disable caches */
+ bsr save_register
+ mov #SH_SLEEP_REG_CCR, r0
+
+ bsr save_register
+ mov #SH_SLEEP_REG_RAMCR, r0
+
+ bsr get_register
+ mov #SH_SLEEP_REG_CCR, r0
+ mov #0, r1
+ mov.l r1, @r0
+ icbi @r0
+
+skip_mmu_save_disable:
+ /* call self-refresh entering code if needed */
+ mov.l @(SH_SLEEP_MODE, r5), r0
tst #SUSP_SH_SF, r0
bt skip_set_sf
-#ifdef CONFIG_CPU_SUBTYPE_SH7724
- /* DBSC: put memory in self-refresh mode */
- mov.l dben_reg, r4
- mov.l dben_data0, r1
- mov.l r1, @r4
- mov.l dbrfpdn0_reg, r4
- mov.l dbrfpdn0_data0, r1
- mov.l r1, @r4
-
- mov.l dbcmdcnt_reg, r4
- mov.l dbcmdcnt_data0, r1
- mov.l r1, @r4
-
- mov.l dbcmdcnt_reg, r4
- mov.l dbcmdcnt_data1, r1
- mov.l r1, @r4
-
- mov.l dbrfpdn0_reg, r4
- mov.l dbrfpdn0_data1, r1
- mov.l r1, @r4
-#else
- /* SBSC: disable power down and put in self-refresh mode */
- mov.l 1f, r4
- mov.l 2f, r1
- mov.l @r4, r2
- or r1, r2
- mov.l 3f, r3
- and r3, r2
- mov.l r2, @r4
-#endif
+ mov.l @(SH_SLEEP_SF_PRE, r5), r0
+ jsr @r0
+ nop
skip_set_sf:
+ mov.l @(SH_SLEEP_MODE, r5), r0
tst #SUSP_SH_STANDBY, r0
bt test_rstandby
@@ -104,6 +128,12 @@
tst #SUSP_SH_RSTANDBY, r0
bt test_ustandby
+ /* setup BAR register */
+ bsr get_register
+ mov #SH_SLEEP_REG_BAR, r0
+ mov.l @(SH_SLEEP_RESUME, r5), r1
+ mov.l r1, @r0
+
/* set mode to "r-standby mode" */
bra do_sleep
mov #0x20, r1
@@ -123,124 +153,136 @@
do_sleep:
/* setup and enter selected standby mode */
- mov.l 5f, r4
- mov.l r1, @r4
+ bsr get_register
+ mov #SH_SLEEP_REG_STBCR, r0
+ mov.l r1, @r0
again:
sleep
bra again
nop
-restore_jump_vbr:
+save_register:
+ add #SH_SLEEP_BASE_ADDR, r0
+ mov.l @(r0, r5), r1
+ add #-SH_SLEEP_BASE_ADDR, r0
+ mov.l @r1, r1
+ add #SH_SLEEP_BASE_DATA, r0
+ mov.l r1, @(r0, r5)
+ add #-SH_SLEEP_BASE_DATA, r0
+ rts
+ nop
+
+get_register:
+ add #SH_SLEEP_BASE_ADDR, r0
+ mov.l @(r0, r5), r0
+ rts
+ nop
+ENTRY(sh_mobile_sleep_enter_end)
+
+ .balign 4
+ENTRY(sh_mobile_sleep_resume_start)
+
+ /* figure out start address */
+ bsr 0f
+ nop
+0:
+ sts pr, k1
+ mov.l 1f, k0
+ and k0, k1
+
+ /* store pointer to data area in VBR */
+ ldc k1, vbr
+
+ /* setup sr with saved sr */
+ mov.l @(SH_SLEEP_SR, k1), k0
+ ldc k0, sr
+
+ /* now: user register set! */
+ stc vbr, r5
+
/* setup spc with return address to c code */
- mov.l saved_spc, k0
- ldc k0, spc
+ mov.l @(SH_SLEEP_SPC, r5), r0
+ ldc r0, spc
/* restore vbr */
- mov.l saved_vbr, k0
- ldc k0, vbr
+ mov.l @(SH_SLEEP_VBR, r5), r0
+ ldc r0, vbr
/* setup ssr with saved sr */
- mov.l saved_sr, k0
- ldc k0, ssr
+ mov.l @(SH_SLEEP_SR, r5), r0
+ ldc r0, ssr
- /* get mode flags */
- mov.l saved_mode, k0
+ /* restore sp */
+ mov.l @(SH_SLEEP_SP, r5), r15
-done_sleep:
- /* reset standby mode to sleep mode */
- mov.l 5f, k4
- mov #0x00, k1
- mov.l k1, @k4
+ /* restore sleep mode register */
+ bsr restore_register
+ mov #SH_SLEEP_REG_STBCR, r0
- tst #SUSP_SH_SF, k0
+ /* call self-refresh resume code if needed */
+ mov.l @(SH_SLEEP_MODE, r5), r0
+ tst #SUSP_SH_SF, r0
bt skip_restore_sf
-#ifdef CONFIG_CPU_SUBTYPE_SH7724
- /* DBSC: put memory in auto-refresh mode */
- mov.l dbrfpdn0_reg, k4
- mov.l dbrfpdn0_data0, k1
- mov.l k1, @k4
+ mov.l @(SH_SLEEP_SF_POST, r5), r0
+ jsr @r0
+ nop
- nop /* sleep 140 ns */
- nop
- nop
- nop
-
- mov.l dbcmdcnt_reg, k4
- mov.l dbcmdcnt_data0, k1
- mov.l k1, @k4
-
- mov.l dbcmdcnt_reg, k4
- mov.l dbcmdcnt_data1, k1
- mov.l k1, @k4
-
- mov.l dben_reg, k4
- mov.l dben_data1, k1
- mov.l k1, @k4
-
- mov.l dbrfpdn0_reg, k4
- mov.l dbrfpdn0_data2, k1
- mov.l k1, @k4
-#else
- /* SBSC: set auto-refresh mode */
- mov.l 1f, k4
- mov.l @k4, k0
- mov.l 4f, k1
- and k1, k0
- mov.l k0, @k4
- mov.l 6f, k4
- mov.l 8f, k0
- mov.l @k4, k1
- mov #-1, k4
- add k4, k1
- or k1, k0
- mov.l 7f, k1
- mov.l k0, @k1
-#endif
skip_restore_sf:
- /* jump to vbr vector */
- mov.l saved_vbr, k0
- mov.l offset_vbr, k4
- add k4, k0
- jmp @k0
+ /* restore mmu and cache state if needed */
+ mov.l @(SH_SLEEP_MODE, r5), r0
+ tst #SUSP_SH_MMU, r0
+ bt skip_restore_mmu
+
+ /* restore mmu state */
+ bsr restore_register
+ mov #SH_SLEEP_REG_PTEH, r0
+
+ bsr restore_register
+ mov #SH_SLEEP_REG_PTEL, r0
+
+ bsr restore_register
+ mov #SH_SLEEP_REG_TTB, r0
+
+ bsr restore_register
+ mov #SH_SLEEP_REG_TEA, r0
+
+ bsr restore_register
+ mov #SH_SLEEP_REG_PTEA, r0
+
+ bsr restore_register
+ mov #SH_SLEEP_REG_PASCR, r0
+
+ bsr restore_register
+ mov #SH_SLEEP_REG_IRMCR, r0
+
+ bsr restore_register
+ mov #SH_SLEEP_REG_MMUCR, r0
+ icbi @r0
+
+ /* restore cache settings */
+ bsr restore_register
+ mov #SH_SLEEP_REG_RAMCR, r0
+ icbi @r0
+
+ bsr restore_register
+ mov #SH_SLEEP_REG_CCR, r0
+ icbi @r0
+
+skip_restore_mmu:
+ rte
+ nop
+
+restore_register:
+ add #SH_SLEEP_BASE_DATA, r0
+ mov.l @(r0, r5), r1
+ add #-SH_SLEEP_BASE_DATA, r0
+ add #SH_SLEEP_BASE_ADDR, r0
+ mov.l @(r0, r5), r0
+ mov.l r1, @r0
+ rts
nop
.balign 4
-saved_mode: .long 0
-saved_spc: .long 0
-saved_sr: .long 0
-saved_vbr: .long 0
-offset_vbr: .long 0x600
-#ifdef CONFIG_CPU_SUBTYPE_SH7724
-dben_reg: .long 0xfd000010 /* DBEN */
-dben_data0: .long 0
-dben_data1: .long 1
-dbrfpdn0_reg: .long 0xfd000040 /* DBRFPDN0 */
-dbrfpdn0_data0: .long 0
-dbrfpdn0_data1: .long 1
-dbrfpdn0_data2: .long 0x00010000
-dbcmdcnt_reg: .long 0xfd000014 /* DBCMDCNT */
-dbcmdcnt_data0: .long 2
-dbcmdcnt_data1: .long 4
-#else
-1: .long 0xfe400008 /* SDCR0 */
-2: .long 0x00000400
-3: .long 0xffff7fff
-4: .long 0xfffffbff
-#endif
-5: .long 0xa4150020 /* STBCR */
-6: .long 0xfe40001c /* RTCOR */
-7: .long 0xfe400018 /* RTCNT */
-8: .long 0xa55a0000
-
-
-/* interrupt vector @ 0x600 */
- .balign 0x400,0,0x400
- .long 0xdeadbeef
- .balign 0x200,0,0x200
- bra restore_jump_vbr
- nop
-sh_mobile_standby_end:
-
-ENTRY(sh_mobile_standby_size)
- .long sh_mobile_standby_end - sh_mobile_standby
+1: .long ~0x7ff
+ENTRY(sh_mobile_sleep_resume_end)
diff --git a/arch/sh/kernel/cpu/ubc.S b/arch/sh/kernel/cpu/ubc.S
deleted file mode 100644
index 8192307..0000000
--- a/arch/sh/kernel/cpu/ubc.S
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * arch/sh/kernel/cpu/ubc.S
- *
- * Set of management routines for the User Break Controller (UBC)
- *
- * Copyright (C) 2002 Paul Mundt
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-#include <linux/linkage.h>
-#include <asm/ubc.h>
-
-#define STBCR2 0xffc00010
-
-ENTRY(ubc_sleep)
- mov #0, r0
-
- mov.l 1f, r1 ! Zero out UBC_BBRA ..
- mov.w r0, @r1
-
- mov.l 2f, r1 ! .. same for BBRB ..
- mov.w r0, @r1
-
- mov.l 3f, r1 ! .. and again for BRCR.
- mov.w r0, @r1
-
- mov.w @r1, r0 ! Dummy read BRCR
-
- mov.l 4f, r1 ! Set MSTP5 in STBCR2
- mov.b @r1, r0
- or #0x01, r0
- mov.b r0, @r1
-
- mov.b @r1, r0 ! Two dummy reads ..
- mov.b @r1, r0
-
- rts
- nop
-
-ENTRY(ubc_wakeup)
- mov.l 4f, r1 ! Clear MSTP5
- mov.b @r1, r0
- and #0xfe, r0
- mov.b r0, @r1
-
- mov.b @r1, r0 ! Two more dummy reads ..
- mov.b @r1, r0
-
- rts
- nop
-
-1: .long UBC_BBRA
-2: .long UBC_BBRB
-3: .long UBC_BRCR
-4: .long STBCR2
-
diff --git a/arch/sh/kernel/dma-nommu.c b/arch/sh/kernel/dma-nommu.c
new file mode 100644
index 0000000..3c55b87
--- /dev/null
+++ b/arch/sh/kernel/dma-nommu.c
@@ -0,0 +1,82 @@
+/*
+ * DMA mapping support for platforms lacking IOMMUs.
+ *
+ * Copyright (C) 2009 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/dma-mapping.h>
+#include <linux/io.h>
+
+static dma_addr_t nommu_map_page(struct device *dev, struct page *page,
+ unsigned long offset, size_t size,
+ enum dma_data_direction dir,
+ struct dma_attrs *attrs)
+{
+ dma_addr_t addr = page_to_phys(page) + offset;
+
+ WARN_ON(size == 0);
+ dma_cache_sync(dev, page_address(page) + offset, size, dir);
+
+ return addr;
+}
+
+static int nommu_map_sg(struct device *dev, struct scatterlist *sg,
+ int nents, enum dma_data_direction dir,
+ struct dma_attrs *attrs)
+{
+ struct scatterlist *s;
+ int i;
+
+ WARN_ON(nents == 0 || sg[0].length == 0);
+
+ for_each_sg(sg, s, nents, i) {
+ BUG_ON(!sg_page(s));
+
+ dma_cache_sync(dev, sg_virt(s), s->length, dir);
+
+ s->dma_address = sg_phys(s);
+ s->dma_length = s->length;
+ }
+
+ return nents;
+}
+
+#ifdef CONFIG_DMA_NONCOHERENT
+static void nommu_sync_single(struct device *dev, dma_addr_t addr,
+ size_t size, enum dma_data_direction dir)
+{
+ dma_cache_sync(dev, phys_to_virt(addr), size, dir);
+}
+
+static void nommu_sync_sg(struct device *dev, struct scatterlist *sg,
+ int nelems, enum dma_data_direction dir)
+{
+ struct scatterlist *s;
+ int i;
+
+ for_each_sg(sg, s, nelems, i)
+ dma_cache_sync(dev, sg_virt(s), s->length, dir);
+}
+#endif
+
+struct dma_map_ops nommu_dma_ops = {
+ .alloc_coherent = dma_generic_alloc_coherent,
+ .free_coherent = dma_generic_free_coherent,
+ .map_page = nommu_map_page,
+ .map_sg = nommu_map_sg,
+#ifdef CONFIG_DMA_NONCOHERENT
+ .sync_single_for_device = nommu_sync_single,
+ .sync_sg_for_device = nommu_sync_sg,
+#endif
+ .is_phys = 1,
+};
+
+void __init no_iommu_init(void)
+{
+ if (dma_ops)
+ return;
+ dma_ops = &nommu_dma_ops;
+}
diff --git a/arch/sh/kernel/dwarf.c b/arch/sh/kernel/dwarf.c
index d76a231..3576b70 100644
--- a/arch/sh/kernel/dwarf.c
+++ b/arch/sh/kernel/dwarf.c
@@ -20,6 +20,7 @@
#include <linux/list.h>
#include <linux/mempool.h>
#include <linux/mm.h>
+#include <linux/elf.h>
#include <linux/ftrace.h>
#include <asm/dwarf.h>
#include <asm/unwinder.h>
@@ -530,7 +531,18 @@
}
/**
- * dwarf_unwind_stack - recursively unwind the stack
+ * dwarf_free_frame - free the memory allocated for @frame
+ * @frame: the frame to free
+ */
+void dwarf_free_frame(struct dwarf_frame *frame)
+{
+ dwarf_frame_free_regs(frame);
+ mempool_free(frame, dwarf_frame_pool);
+}
+
+/**
+ * dwarf_unwind_stack - unwind the stack
+ *
* @pc: address of the function to unwind
* @prev: struct dwarf_frame of the previous stackframe on the callstack
*
@@ -548,9 +560,9 @@
unsigned long addr;
/*
- * If this is the first invocation of this recursive function we
- * need get the contents of a physical register to get the CFA
- * in order to begin the virtual unwinding of the stack.
+ * If we're starting at the top of the stack we need get the
+ * contents of a physical register to get the CFA in order to
+ * begin the virtual unwinding of the stack.
*
* NOTE: the return address is guaranteed to be setup by the
* time this function makes its first function call.
@@ -593,9 +605,8 @@
fde = dwarf_lookup_fde(pc);
if (!fde) {
/*
- * This is our normal exit path - the one that stops the
- * recursion. There's two reasons why we might exit
- * here,
+ * This is our normal exit path. There are two reasons
+ * why we might exit here,
*
* a) pc has no asscociated DWARF frame info and so
* we don't know how to unwind this frame. This is
@@ -637,10 +648,10 @@
} else {
/*
- * Again, this is the first invocation of this
- * recurisve function. We need to physically
- * read the contents of a register in order to
- * get the Canonical Frame Address for this
+ * Again, we're starting from the top of the
+ * stack. We need to physically read
+ * the contents of a register in order to get
+ * the Canonical Frame Address for this
* function.
*/
frame->cfa = dwarf_read_arch_reg(frame->cfa_register);
@@ -670,13 +681,12 @@
return frame;
bail:
- dwarf_frame_free_regs(frame);
- mempool_free(frame, dwarf_frame_pool);
+ dwarf_free_frame(frame);
return NULL;
}
static int dwarf_parse_cie(void *entry, void *p, unsigned long len,
- unsigned char *end)
+ unsigned char *end, struct module *mod)
{
struct dwarf_cie *cie;
unsigned long flags;
@@ -772,6 +782,8 @@
cie->initial_instructions = p;
cie->instructions_end = end;
+ cie->mod = mod;
+
/* Add to list */
spin_lock_irqsave(&dwarf_cie_lock, flags);
list_add_tail(&cie->link, &dwarf_cie_list);
@@ -782,7 +794,7 @@
static int dwarf_parse_fde(void *entry, u32 entry_type,
void *start, unsigned long len,
- unsigned char *end)
+ unsigned char *end, struct module *mod)
{
struct dwarf_fde *fde;
struct dwarf_cie *cie;
@@ -831,6 +843,8 @@
fde->instructions = p;
fde->end = end;
+ fde->mod = mod;
+
/* Add to list. */
spin_lock_irqsave(&dwarf_fde_lock, flags);
list_add_tail(&fde->link, &dwarf_fde_list);
@@ -854,10 +868,8 @@
while (1) {
frame = dwarf_unwind_stack(return_addr, _frame);
- if (_frame) {
- dwarf_frame_free_regs(_frame);
- mempool_free(_frame, dwarf_frame_pool);
- }
+ if (_frame)
+ dwarf_free_frame(_frame);
_frame = frame;
@@ -867,6 +879,9 @@
return_addr = frame->return_addr;
ops->address(data, return_addr, 1);
}
+
+ if (frame)
+ dwarf_free_frame(frame);
}
static struct unwinder dwarf_unwinder = {
@@ -896,6 +911,158 @@
}
/**
+ * dwarf_parse_section - parse DWARF section
+ * @eh_frame_start: start address of the .eh_frame section
+ * @eh_frame_end: end address of the .eh_frame section
+ * @mod: the kernel module containing the .eh_frame section
+ *
+ * Parse the information in a .eh_frame section.
+ */
+static int dwarf_parse_section(char *eh_frame_start, char *eh_frame_end,
+ struct module *mod)
+{
+ u32 entry_type;
+ void *p, *entry;
+ int count, err = 0;
+ unsigned long len = 0;
+ unsigned int c_entries, f_entries;
+ unsigned char *end;
+
+ c_entries = 0;
+ f_entries = 0;
+ entry = eh_frame_start;
+
+ while ((char *)entry < eh_frame_end) {
+ p = entry;
+
+ count = dwarf_entry_len(p, &len);
+ if (count == 0) {
+ /*
+ * We read a bogus length field value. There is
+ * nothing we can do here apart from disabling
+ * the DWARF unwinder. We can't even skip this
+ * entry and move to the next one because 'len'
+ * tells us where our next entry is.
+ */
+ err = -EINVAL;
+ goto out;
+ } else
+ p += count;
+
+ /* initial length does not include itself */
+ end = p + len;
+
+ entry_type = get_unaligned((u32 *)p);
+ p += 4;
+
+ if (entry_type == DW_EH_FRAME_CIE) {
+ err = dwarf_parse_cie(entry, p, len, end, mod);
+ if (err < 0)
+ goto out;
+ else
+ c_entries++;
+ } else {
+ err = dwarf_parse_fde(entry, entry_type, p, len,
+ end, mod);
+ if (err < 0)
+ goto out;
+ else
+ f_entries++;
+ }
+
+ entry = (char *)entry + len + 4;
+ }
+
+ printk(KERN_INFO "DWARF unwinder initialised: read %u CIEs, %u FDEs\n",
+ c_entries, f_entries);
+
+ return 0;
+
+out:
+ return err;
+}
+
+#ifdef CONFIG_MODULES
+int module_dwarf_finalize(const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs,
+ struct module *me)
+{
+ unsigned int i, err;
+ unsigned long start, end;
+ char *secstrings = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset;
+
+ start = end = 0;
+
+ for (i = 1; i < hdr->e_shnum; i++) {
+ /* Alloc bit cleared means "ignore it." */
+ if ((sechdrs[i].sh_flags & SHF_ALLOC)
+ && !strcmp(secstrings+sechdrs[i].sh_name, ".eh_frame")) {
+ start = sechdrs[i].sh_addr;
+ end = start + sechdrs[i].sh_size;
+ break;
+ }
+ }
+
+ /* Did we find the .eh_frame section? */
+ if (i != hdr->e_shnum) {
+ err = dwarf_parse_section((char *)start, (char *)end, me);
+ if (err) {
+ printk(KERN_WARNING "%s: failed to parse DWARF info\n",
+ me->name);
+ return err;
+ }
+ }
+
+ return 0;
+}
+
+/**
+ * module_dwarf_cleanup - remove FDE/CIEs associated with @mod
+ * @mod: the module that is being unloaded
+ *
+ * Remove any FDEs and CIEs from the global lists that came from
+ * @mod's .eh_frame section because @mod is being unloaded.
+ */
+void module_dwarf_cleanup(struct module *mod)
+{
+ struct dwarf_fde *fde;
+ struct dwarf_cie *cie;
+ unsigned long flags;
+
+ spin_lock_irqsave(&dwarf_cie_lock, flags);
+
+again_cie:
+ list_for_each_entry(cie, &dwarf_cie_list, link) {
+ if (cie->mod == mod)
+ break;
+ }
+
+ if (&cie->link != &dwarf_cie_list) {
+ list_del(&cie->link);
+ kfree(cie);
+ goto again_cie;
+ }
+
+ spin_unlock_irqrestore(&dwarf_cie_lock, flags);
+
+ spin_lock_irqsave(&dwarf_fde_lock, flags);
+
+again_fde:
+ list_for_each_entry(fde, &dwarf_fde_list, link) {
+ if (fde->mod == mod)
+ break;
+ }
+
+ if (&fde->link != &dwarf_fde_list) {
+ list_del(&fde->link);
+ kfree(fde);
+ goto again_fde;
+ }
+
+ spin_unlock_irqrestore(&dwarf_fde_lock, flags);
+}
+#endif /* CONFIG_MODULES */
+
+/**
* dwarf_unwinder_init - initialise the dwarf unwinder
*
* Build the data structures describing the .dwarf_frame section to
@@ -906,19 +1073,10 @@
*/
static int __init dwarf_unwinder_init(void)
{
- u32 entry_type;
- void *p, *entry;
- int count, err = 0;
- unsigned long len;
- unsigned int c_entries, f_entries;
- unsigned char *end;
+ int err;
INIT_LIST_HEAD(&dwarf_cie_list);
INIT_LIST_HEAD(&dwarf_fde_list);
- c_entries = 0;
- f_entries = 0;
- entry = &__start_eh_frame;
-
dwarf_frame_cachep = kmem_cache_create("dwarf_frames",
sizeof(struct dwarf_frame), 0,
SLAB_PANIC | SLAB_HWCACHE_ALIGN | SLAB_NOTRACK, NULL);
@@ -937,47 +1095,9 @@
mempool_free_slab,
dwarf_reg_cachep);
- while ((char *)entry < __stop_eh_frame) {
- p = entry;
-
- count = dwarf_entry_len(p, &len);
- if (count == 0) {
- /*
- * We read a bogus length field value. There is
- * nothing we can do here apart from disabling
- * the DWARF unwinder. We can't even skip this
- * entry and move to the next one because 'len'
- * tells us where our next entry is.
- */
- goto out;
- } else
- p += count;
-
- /* initial length does not include itself */
- end = p + len;
-
- entry_type = get_unaligned((u32 *)p);
- p += 4;
-
- if (entry_type == DW_EH_FRAME_CIE) {
- err = dwarf_parse_cie(entry, p, len, end);
- if (err < 0)
- goto out;
- else
- c_entries++;
- } else {
- err = dwarf_parse_fde(entry, entry_type, p, len, end);
- if (err < 0)
- goto out;
- else
- f_entries++;
- }
-
- entry = (char *)entry + len + 4;
- }
-
- printk(KERN_INFO "DWARF unwinder initialised: read %u CIEs, %u FDEs\n",
- c_entries, f_entries);
+ err = dwarf_parse_section(__start_eh_frame, __stop_eh_frame, NULL);
+ if (err)
+ goto out;
err = unwinder_register(&dwarf_unwinder);
if (err)
diff --git a/arch/sh/kernel/entry-common.S b/arch/sh/kernel/entry-common.S
index 3eb8493..f0abd58 100644
--- a/arch/sh/kernel/entry-common.S
+++ b/arch/sh/kernel/entry-common.S
@@ -133,7 +133,7 @@
! r8: current_thread_info
! t: result of "tst #_TIF_NEED_RESCHED, r0"
bf/s work_resched
- tst #(_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK), r0
+ tst #_TIF_SIGPENDING, r0
work_notifysig:
bt/s __restore_all
mov r15, r4
diff --git a/arch/sh/kernel/ftrace.c b/arch/sh/kernel/ftrace.c
index 2c48e26..b6f41c1 100644
--- a/arch/sh/kernel/ftrace.c
+++ b/arch/sh/kernel/ftrace.c
@@ -62,6 +62,150 @@
return ftrace_replaced_code;
}
+/*
+ * Modifying code must take extra care. On an SMP machine, if
+ * the code being modified is also being executed on another CPU
+ * that CPU will have undefined results and possibly take a GPF.
+ * We use kstop_machine to stop other CPUS from exectuing code.
+ * But this does not stop NMIs from happening. We still need
+ * to protect against that. We separate out the modification of
+ * the code to take care of this.
+ *
+ * Two buffers are added: An IP buffer and a "code" buffer.
+ *
+ * 1) Put the instruction pointer into the IP buffer
+ * and the new code into the "code" buffer.
+ * 2) Wait for any running NMIs to finish and set a flag that says
+ * we are modifying code, it is done in an atomic operation.
+ * 3) Write the code
+ * 4) clear the flag.
+ * 5) Wait for any running NMIs to finish.
+ *
+ * If an NMI is executed, the first thing it does is to call
+ * "ftrace_nmi_enter". This will check if the flag is set to write
+ * and if it is, it will write what is in the IP and "code" buffers.
+ *
+ * The trick is, it does not matter if everyone is writing the same
+ * content to the code location. Also, if a CPU is executing code
+ * it is OK to write to that code location if the contents being written
+ * are the same as what exists.
+ */
+#define MOD_CODE_WRITE_FLAG (1 << 31) /* set when NMI should do the write */
+static atomic_t nmi_running = ATOMIC_INIT(0);
+static int mod_code_status; /* holds return value of text write */
+static void *mod_code_ip; /* holds the IP to write to */
+static void *mod_code_newcode; /* holds the text to write to the IP */
+
+static unsigned nmi_wait_count;
+static atomic_t nmi_update_count = ATOMIC_INIT(0);
+
+int ftrace_arch_read_dyn_info(char *buf, int size)
+{
+ int r;
+
+ r = snprintf(buf, size, "%u %u",
+ nmi_wait_count,
+ atomic_read(&nmi_update_count));
+ return r;
+}
+
+static void clear_mod_flag(void)
+{
+ int old = atomic_read(&nmi_running);
+
+ for (;;) {
+ int new = old & ~MOD_CODE_WRITE_FLAG;
+
+ if (old == new)
+ break;
+
+ old = atomic_cmpxchg(&nmi_running, old, new);
+ }
+}
+
+static void ftrace_mod_code(void)
+{
+ /*
+ * Yes, more than one CPU process can be writing to mod_code_status.
+ * (and the code itself)
+ * But if one were to fail, then they all should, and if one were
+ * to succeed, then they all should.
+ */
+ mod_code_status = probe_kernel_write(mod_code_ip, mod_code_newcode,
+ MCOUNT_INSN_SIZE);
+
+ /* if we fail, then kill any new writers */
+ if (mod_code_status)
+ clear_mod_flag();
+}
+
+void ftrace_nmi_enter(void)
+{
+ if (atomic_inc_return(&nmi_running) & MOD_CODE_WRITE_FLAG) {
+ smp_rmb();
+ ftrace_mod_code();
+ atomic_inc(&nmi_update_count);
+ }
+ /* Must have previous changes seen before executions */
+ smp_mb();
+}
+
+void ftrace_nmi_exit(void)
+{
+ /* Finish all executions before clearing nmi_running */
+ smp_mb();
+ atomic_dec(&nmi_running);
+}
+
+static void wait_for_nmi_and_set_mod_flag(void)
+{
+ if (!atomic_cmpxchg(&nmi_running, 0, MOD_CODE_WRITE_FLAG))
+ return;
+
+ do {
+ cpu_relax();
+ } while (atomic_cmpxchg(&nmi_running, 0, MOD_CODE_WRITE_FLAG));
+
+ nmi_wait_count++;
+}
+
+static void wait_for_nmi(void)
+{
+ if (!atomic_read(&nmi_running))
+ return;
+
+ do {
+ cpu_relax();
+ } while (atomic_read(&nmi_running));
+
+ nmi_wait_count++;
+}
+
+static int
+do_ftrace_mod_code(unsigned long ip, void *new_code)
+{
+ mod_code_ip = (void *)ip;
+ mod_code_newcode = new_code;
+
+ /* The buffers need to be visible before we let NMIs write them */
+ smp_mb();
+
+ wait_for_nmi_and_set_mod_flag();
+
+ /* Make sure all running NMIs have finished before we write the code */
+ smp_mb();
+
+ ftrace_mod_code();
+
+ /* Make sure the write happens before clearing the bit */
+ smp_mb();
+
+ clear_mod_flag();
+ wait_for_nmi();
+
+ return mod_code_status;
+}
+
static int ftrace_modify_code(unsigned long ip, unsigned char *old_code,
unsigned char *new_code)
{
@@ -86,7 +230,7 @@
return -EINVAL;
/* replace the text with the new text */
- if (probe_kernel_write((void *)ip, new_code, MCOUNT_INSN_SIZE))
+ if (do_ftrace_mod_code(ip, new_code))
return -EPERM;
flush_icache_range(ip, ip + MCOUNT_INSN_SIZE);
diff --git a/arch/sh/kernel/head_32.S b/arch/sh/kernel/head_32.S
index a78be74..1151ecd 100644
--- a/arch/sh/kernel/head_32.S
+++ b/arch/sh/kernel/head_32.S
@@ -33,7 +33,7 @@
.long 1 /* LOADER_TYPE */
.long 0x00000000 /* INITRD_START */
.long 0x00000000 /* INITRD_SIZE */
-#ifdef CONFIG_32BIT
+#if defined(CONFIG_32BIT) && defined(CONFIG_PMB_FIXED)
.long 0x53453f00 + 32 /* "SE?" = 32 bit */
#else
.long 0x53453f00 + 29 /* "SE?" = 29 bit */
diff --git a/arch/sh/kernel/idle.c b/arch/sh/kernel/idle.c
index 27ff2dc..aaff003 100644
--- a/arch/sh/kernel/idle.c
+++ b/arch/sh/kernel/idle.c
@@ -21,7 +21,7 @@
#include <asm/atomic.h>
static int hlt_counter;
-void (*pm_idle)(void);
+void (*pm_idle)(void) = NULL;
void (*pm_power_off)(void);
EXPORT_SYMBOL(pm_power_off);
@@ -39,48 +39,92 @@
}
__setup("hlt", hlt_setup);
-void default_idle(void)
+static inline int hlt_works(void)
{
- if (!hlt_counter) {
- clear_thread_flag(TIF_POLLING_NRFLAG);
- smp_mb__after_clear_bit();
- set_bl_bit();
- stop_critical_timings();
-
- while (!need_resched())
- cpu_sleep();
-
- start_critical_timings();
- clear_bl_bit();
- set_thread_flag(TIF_POLLING_NRFLAG);
- } else
- while (!need_resched())
- cpu_relax();
+ return !hlt_counter;
}
+/*
+ * On SMP it's slightly faster (but much more power-consuming!)
+ * to poll the ->work.need_resched flag instead of waiting for the
+ * cross-CPU IPI to arrive. Use this option with caution.
+ */
+static void poll_idle(void)
+{
+ local_irq_enable();
+ while (!need_resched())
+ cpu_relax();
+}
+
+void default_idle(void)
+{
+ if (hlt_works()) {
+ clear_thread_flag(TIF_POLLING_NRFLAG);
+ smp_mb__after_clear_bit();
+
+ if (!need_resched()) {
+ local_irq_enable();
+ cpu_sleep();
+ } else
+ local_irq_enable();
+
+ set_thread_flag(TIF_POLLING_NRFLAG);
+ } else
+ poll_idle();
+}
+
+/*
+ * The idle thread. There's no useful work to be done, so just try to conserve
+ * power and have a low exit latency (ie sit in a loop waiting for somebody to
+ * say that they'd like to reschedule)
+ */
void cpu_idle(void)
{
+ unsigned int cpu = smp_processor_id();
+
set_thread_flag(TIF_POLLING_NRFLAG);
/* endless idle loop with no priority at all */
while (1) {
- void (*idle)(void) = pm_idle;
-
- if (!idle)
- idle = default_idle;
-
tick_nohz_stop_sched_tick(1);
- while (!need_resched())
- idle();
- tick_nohz_restart_sched_tick();
+ while (!need_resched() && cpu_online(cpu)) {
+ check_pgt_cache();
+ rmb();
+
+ local_irq_disable();
+ /* Don't trace irqs off for idle */
+ stop_critical_timings();
+ pm_idle();
+ /*
+ * Sanity check to ensure that pm_idle() returns
+ * with IRQs enabled
+ */
+ WARN_ON(irqs_disabled());
+ start_critical_timings();
+ }
+
+ tick_nohz_restart_sched_tick();
preempt_enable_no_resched();
schedule();
preempt_disable();
- check_pgt_cache();
}
}
+void __cpuinit select_idle_routine(void)
+{
+ /*
+ * If a platform has set its own idle routine, leave it alone.
+ */
+ if (pm_idle)
+ return;
+
+ if (hlt_works())
+ pm_idle = default_idle;
+ else
+ pm_idle = poll_idle;
+}
+
static void do_nothing(void *unused)
{
}
diff --git a/arch/sh/kernel/io_generic.c b/arch/sh/kernel/io_generic.c
index b8fa652..e1e1dbd 100644
--- a/arch/sh/kernel/io_generic.c
+++ b/arch/sh/kernel/io_generic.c
@@ -24,7 +24,7 @@
#define dummy_read()
#endif
-unsigned long generic_io_base;
+unsigned long generic_io_base = 0;
u8 generic_inb(unsigned long port)
{
@@ -147,8 +147,10 @@
void __iomem *generic_ioport_map(unsigned long addr, unsigned int size)
{
+#ifdef P1SEG
if (PXSEG(addr) >= P1SEG)
return (void __iomem *)addr;
+#endif
return (void __iomem *)(addr + generic_io_base);
}
diff --git a/arch/sh/kernel/irq.c b/arch/sh/kernel/irq.c
index eac7da7..e1913f2 100644
--- a/arch/sh/kernel/irq.c
+++ b/arch/sh/kernel/irq.c
@@ -37,7 +37,15 @@
*/
static int show_other_interrupts(struct seq_file *p, int prec)
{
+ int j;
+
+ seq_printf(p, "%*s: ", prec, "NMI");
+ for_each_online_cpu(j)
+ seq_printf(p, "%10u ", irq_stat[j].__nmi_count);
+ seq_printf(p, " Non-maskable interrupts\n");
+
seq_printf(p, "%*s: %10u\n", prec, "ERR", atomic_read(&irq_err_count));
+
return 0;
}
@@ -255,6 +263,12 @@
{
plat_irq_setup();
+ /*
+ * Pin any of the legacy IRQ vectors that haven't already been
+ * grabbed by the platform
+ */
+ reserve_irq_legacy();
+
/* Perform the machine specific initialisation */
if (sh_mv.mv_init_irq)
sh_mv.mv_init_irq();
diff --git a/arch/sh/kernel/irq_32.c b/arch/sh/kernel/irq_32.c
new file mode 100644
index 0000000..e33ab15
--- /dev/null
+++ b/arch/sh/kernel/irq_32.c
@@ -0,0 +1,57 @@
+/*
+ * SHcompact irqflags support
+ *
+ * Copyright (C) 2006 - 2009 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/irqflags.h>
+#include <linux/module.h>
+
+void notrace raw_local_irq_restore(unsigned long flags)
+{
+ unsigned long __dummy0, __dummy1;
+
+ if (flags == RAW_IRQ_DISABLED) {
+ __asm__ __volatile__ (
+ "stc sr, %0\n\t"
+ "or #0xf0, %0\n\t"
+ "ldc %0, sr\n\t"
+ : "=&z" (__dummy0)
+ : /* no inputs */
+ : "memory"
+ );
+ } else {
+ __asm__ __volatile__ (
+ "stc sr, %0\n\t"
+ "and %1, %0\n\t"
+#ifdef CONFIG_CPU_HAS_SR_RB
+ "stc r6_bank, %1\n\t"
+ "or %1, %0\n\t"
+#endif
+ "ldc %0, sr\n\t"
+ : "=&r" (__dummy0), "=r" (__dummy1)
+ : "1" (~RAW_IRQ_DISABLED)
+ : "memory"
+ );
+ }
+}
+EXPORT_SYMBOL(raw_local_irq_restore);
+
+unsigned long notrace __raw_local_save_flags(void)
+{
+ unsigned long flags;
+
+ __asm__ __volatile__ (
+ "stc sr, %0\n\t"
+ "and #0xf0, %0\n\t"
+ : "=&z" (flags)
+ : /* no inputs */
+ : "memory"
+ );
+
+ return flags;
+}
+EXPORT_SYMBOL(__raw_local_save_flags);
diff --git a/arch/sh/kernel/irq_64.c b/arch/sh/kernel/irq_64.c
new file mode 100644
index 0000000..32365ba
--- /dev/null
+++ b/arch/sh/kernel/irq_64.c
@@ -0,0 +1,51 @@
+/*
+ * SHmedia irqflags support
+ *
+ * Copyright (C) 2006 - 2009 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/irqflags.h>
+#include <linux/module.h>
+#include <cpu/registers.h>
+
+void notrace raw_local_irq_restore(unsigned long flags)
+{
+ unsigned long long __dummy;
+
+ if (flags == RAW_IRQ_DISABLED) {
+ __asm__ __volatile__ (
+ "getcon " __SR ", %0\n\t"
+ "or %0, %1, %0\n\t"
+ "putcon %0, " __SR "\n\t"
+ : "=&r" (__dummy)
+ : "r" (RAW_IRQ_DISABLED)
+ );
+ } else {
+ __asm__ __volatile__ (
+ "getcon " __SR ", %0\n\t"
+ "and %0, %1, %0\n\t"
+ "putcon %0, " __SR "\n\t"
+ : "=&r" (__dummy)
+ : "r" (~RAW_IRQ_DISABLED)
+ );
+ }
+}
+EXPORT_SYMBOL(raw_local_irq_restore);
+
+unsigned long notrace __raw_local_save_flags(void)
+{
+ unsigned long flags;
+
+ __asm__ __volatile__ (
+ "getcon " __SR ", %0\n\t"
+ "and %0, %1, %0"
+ : "=&r" (flags)
+ : "r" (RAW_IRQ_DISABLED)
+ );
+
+ return flags;
+}
+EXPORT_SYMBOL(__raw_local_save_flags);
diff --git a/arch/sh/kernel/machine_kexec.c b/arch/sh/kernel/machine_kexec.c
index 7ea2704..76f2802 100644
--- a/arch/sh/kernel/machine_kexec.c
+++ b/arch/sh/kernel/machine_kexec.c
@@ -46,12 +46,6 @@
*/
int machine_kexec_prepare(struct kimage *image)
{
- /* older versions of kexec-tools are passing
- * the zImage entry point as a virtual address.
- */
- if (image->start != PHYSADDR(image->start))
- return -EINVAL; /* upgrade your kexec-tools */
-
return 0;
}
diff --git a/arch/sh/kernel/machvec.c b/arch/sh/kernel/machvec.c
index cbce639..1652340 100644
--- a/arch/sh/kernel/machvec.c
+++ b/arch/sh/kernel/machvec.c
@@ -135,5 +135,9 @@
if (!sh_mv.mv_nr_irqs)
sh_mv.mv_nr_irqs = NR_IRQS;
+#ifdef P2SEG
__set_io_port_base(P2SEG);
+#else
+ __set_io_port_base(0);
+#endif
}
diff --git a/arch/sh/kernel/module.c b/arch/sh/kernel/module.c
index c2efdcd..43adddf 100644
--- a/arch/sh/kernel/module.c
+++ b/arch/sh/kernel/module.c
@@ -32,6 +32,7 @@
#include <linux/string.h>
#include <linux/kernel.h>
#include <asm/unaligned.h>
+#include <asm/dwarf.h>
void *module_alloc(unsigned long size)
{
@@ -145,10 +146,16 @@
const Elf_Shdr *sechdrs,
struct module *me)
{
- return module_bug_finalize(hdr, sechdrs, me);
+ int ret = 0;
+
+ ret |= module_dwarf_finalize(hdr, sechdrs, me);
+ ret |= module_bug_finalize(hdr, sechdrs, me);
+
+ return ret;
}
void module_arch_cleanup(struct module *mod)
{
module_bug_cleanup(mod);
+ module_dwarf_cleanup(mod);
}
diff --git a/arch/sh/kernel/perf_callchain.c b/arch/sh/kernel/perf_callchain.c
new file mode 100644
index 0000000..24ea837
--- /dev/null
+++ b/arch/sh/kernel/perf_callchain.c
@@ -0,0 +1,98 @@
+/*
+ * Performance event callchain support - SuperH architecture code
+ *
+ * Copyright (C) 2009 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/perf_event.h>
+#include <linux/percpu.h>
+#include <asm/unwinder.h>
+#include <asm/ptrace.h>
+
+static inline void callchain_store(struct perf_callchain_entry *entry, u64 ip)
+{
+ if (entry->nr < PERF_MAX_STACK_DEPTH)
+ entry->ip[entry->nr++] = ip;
+}
+
+static void callchain_warning(void *data, char *msg)
+{
+}
+
+static void
+callchain_warning_symbol(void *data, char *msg, unsigned long symbol)
+{
+}
+
+static int callchain_stack(void *data, char *name)
+{
+ return 0;
+}
+
+static void callchain_address(void *data, unsigned long addr, int reliable)
+{
+ struct perf_callchain_entry *entry = data;
+
+ if (reliable)
+ callchain_store(entry, addr);
+}
+
+static const struct stacktrace_ops callchain_ops = {
+ .warning = callchain_warning,
+ .warning_symbol = callchain_warning_symbol,
+ .stack = callchain_stack,
+ .address = callchain_address,
+};
+
+static void
+perf_callchain_kernel(struct pt_regs *regs, struct perf_callchain_entry *entry)
+{
+ callchain_store(entry, PERF_CONTEXT_KERNEL);
+ callchain_store(entry, regs->pc);
+
+ unwind_stack(NULL, regs, NULL, &callchain_ops, entry);
+}
+
+static void
+perf_do_callchain(struct pt_regs *regs, struct perf_callchain_entry *entry)
+{
+ int is_user;
+
+ if (!regs)
+ return;
+
+ is_user = user_mode(regs);
+
+ if (!current || current->pid == 0)
+ return;
+
+ if (is_user && current->state != TASK_RUNNING)
+ return;
+
+ /*
+ * Only the kernel side is implemented for now.
+ */
+ if (!is_user)
+ perf_callchain_kernel(regs, entry);
+}
+
+/*
+ * No need for separate IRQ and NMI entries.
+ */
+static DEFINE_PER_CPU(struct perf_callchain_entry, callchain);
+
+struct perf_callchain_entry *perf_callchain(struct pt_regs *regs)
+{
+ struct perf_callchain_entry *entry = &__get_cpu_var(callchain);
+
+ entry->nr = 0;
+
+ perf_do_callchain(regs, entry);
+
+ return entry;
+}
diff --git a/arch/sh/kernel/perf_event.c b/arch/sh/kernel/perf_event.c
new file mode 100644
index 0000000..7ff0943
--- /dev/null
+++ b/arch/sh/kernel/perf_event.c
@@ -0,0 +1,312 @@
+/*
+ * Performance event support framework for SuperH hardware counters.
+ *
+ * Copyright (C) 2009 Paul Mundt
+ *
+ * Heavily based on the x86 and PowerPC implementations.
+ *
+ * x86:
+ * Copyright (C) 2008 Thomas Gleixner <tglx@linutronix.de>
+ * Copyright (C) 2008-2009 Red Hat, Inc., Ingo Molnar
+ * Copyright (C) 2009 Jaswinder Singh Rajput
+ * Copyright (C) 2009 Advanced Micro Devices, Inc., Robert Richter
+ * Copyright (C) 2008-2009 Red Hat, Inc., Peter Zijlstra <pzijlstr@redhat.com>
+ * Copyright (C) 2009 Intel Corporation, <markus.t.metzger@intel.com>
+ *
+ * ppc:
+ * Copyright 2008-2009 Paul Mackerras, IBM Corporation.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/perf_event.h>
+#include <asm/processor.h>
+
+struct cpu_hw_events {
+ struct perf_event *events[MAX_HWEVENTS];
+ unsigned long used_mask[BITS_TO_LONGS(MAX_HWEVENTS)];
+ unsigned long active_mask[BITS_TO_LONGS(MAX_HWEVENTS)];
+};
+
+DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events);
+
+static struct sh_pmu *sh_pmu __read_mostly;
+
+/* Number of perf_events counting hardware events */
+static atomic_t num_events;
+/* Used to avoid races in calling reserve/release_pmc_hardware */
+static DEFINE_MUTEX(pmc_reserve_mutex);
+
+/*
+ * Stub these out for now, do something more profound later.
+ */
+int reserve_pmc_hardware(void)
+{
+ return 0;
+}
+
+void release_pmc_hardware(void)
+{
+}
+
+static inline int sh_pmu_initialized(void)
+{
+ return !!sh_pmu;
+}
+
+/*
+ * Release the PMU if this is the last perf_event.
+ */
+static void hw_perf_event_destroy(struct perf_event *event)
+{
+ if (!atomic_add_unless(&num_events, -1, 1)) {
+ mutex_lock(&pmc_reserve_mutex);
+ if (atomic_dec_return(&num_events) == 0)
+ release_pmc_hardware();
+ mutex_unlock(&pmc_reserve_mutex);
+ }
+}
+
+static int hw_perf_cache_event(int config, int *evp)
+{
+ unsigned long type, op, result;
+ int ev;
+
+ if (!sh_pmu->cache_events)
+ return -EINVAL;
+
+ /* unpack config */
+ type = config & 0xff;
+ op = (config >> 8) & 0xff;
+ result = (config >> 16) & 0xff;
+
+ if (type >= PERF_COUNT_HW_CACHE_MAX ||
+ op >= PERF_COUNT_HW_CACHE_OP_MAX ||
+ result >= PERF_COUNT_HW_CACHE_RESULT_MAX)
+ return -EINVAL;
+
+ ev = (*sh_pmu->cache_events)[type][op][result];
+ if (ev == 0)
+ return -EOPNOTSUPP;
+ if (ev == -1)
+ return -EINVAL;
+ *evp = ev;
+ return 0;
+}
+
+static int __hw_perf_event_init(struct perf_event *event)
+{
+ struct perf_event_attr *attr = &event->attr;
+ struct hw_perf_event *hwc = &event->hw;
+ int config = -1;
+ int err;
+
+ if (!sh_pmu_initialized())
+ return -ENODEV;
+
+ /*
+ * All of the on-chip counters are "limited", in that they have
+ * no interrupts, and are therefore unable to do sampling without
+ * further work and timer assistance.
+ */
+ if (hwc->sample_period)
+ return -EINVAL;
+
+ /*
+ * See if we need to reserve the counter.
+ *
+ * If no events are currently in use, then we have to take a
+ * mutex to ensure that we don't race with another task doing
+ * reserve_pmc_hardware or release_pmc_hardware.
+ */
+ err = 0;
+ if (!atomic_inc_not_zero(&num_events)) {
+ mutex_lock(&pmc_reserve_mutex);
+ if (atomic_read(&num_events) == 0 &&
+ reserve_pmc_hardware())
+ err = -EBUSY;
+ else
+ atomic_inc(&num_events);
+ mutex_unlock(&pmc_reserve_mutex);
+ }
+
+ if (err)
+ return err;
+
+ event->destroy = hw_perf_event_destroy;
+
+ switch (attr->type) {
+ case PERF_TYPE_RAW:
+ config = attr->config & sh_pmu->raw_event_mask;
+ break;
+ case PERF_TYPE_HW_CACHE:
+ err = hw_perf_cache_event(attr->config, &config);
+ if (err)
+ return err;
+ break;
+ case PERF_TYPE_HARDWARE:
+ if (attr->config >= sh_pmu->max_events)
+ return -EINVAL;
+
+ config = sh_pmu->event_map(attr->config);
+ break;
+ }
+
+ if (config == -1)
+ return -EINVAL;
+
+ hwc->config |= config;
+
+ return 0;
+}
+
+static void sh_perf_event_update(struct perf_event *event,
+ struct hw_perf_event *hwc, int idx)
+{
+ u64 prev_raw_count, new_raw_count;
+ s64 delta;
+ int shift = 0;
+
+ /*
+ * Depending on the counter configuration, they may or may not
+ * be chained, in which case the previous counter value can be
+ * updated underneath us if the lower-half overflows.
+ *
+ * Our tactic to handle this is to first atomically read and
+ * exchange a new raw count - then add that new-prev delta
+ * count to the generic counter atomically.
+ *
+ * As there is no interrupt associated with the overflow events,
+ * this is the simplest approach for maintaining consistency.
+ */
+again:
+ prev_raw_count = atomic64_read(&hwc->prev_count);
+ new_raw_count = sh_pmu->read(idx);
+
+ if (atomic64_cmpxchg(&hwc->prev_count, prev_raw_count,
+ new_raw_count) != prev_raw_count)
+ goto again;
+
+ /*
+ * Now we have the new raw value and have updated the prev
+ * timestamp already. We can now calculate the elapsed delta
+ * (counter-)time and add that to the generic counter.
+ *
+ * Careful, not all hw sign-extends above the physical width
+ * of the count.
+ */
+ delta = (new_raw_count << shift) - (prev_raw_count << shift);
+ delta >>= shift;
+
+ atomic64_add(delta, &event->count);
+}
+
+static void sh_pmu_disable(struct perf_event *event)
+{
+ struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+ struct hw_perf_event *hwc = &event->hw;
+ int idx = hwc->idx;
+
+ clear_bit(idx, cpuc->active_mask);
+ sh_pmu->disable(hwc, idx);
+
+ barrier();
+
+ sh_perf_event_update(event, &event->hw, idx);
+
+ cpuc->events[idx] = NULL;
+ clear_bit(idx, cpuc->used_mask);
+
+ perf_event_update_userpage(event);
+}
+
+static int sh_pmu_enable(struct perf_event *event)
+{
+ struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+ struct hw_perf_event *hwc = &event->hw;
+ int idx = hwc->idx;
+
+ if (test_and_set_bit(idx, cpuc->used_mask)) {
+ idx = find_first_zero_bit(cpuc->used_mask, sh_pmu->num_events);
+ if (idx == sh_pmu->num_events)
+ return -EAGAIN;
+
+ set_bit(idx, cpuc->used_mask);
+ hwc->idx = idx;
+ }
+
+ sh_pmu->disable(hwc, idx);
+
+ cpuc->events[idx] = event;
+ set_bit(idx, cpuc->active_mask);
+
+ sh_pmu->enable(hwc, idx);
+
+ perf_event_update_userpage(event);
+
+ return 0;
+}
+
+static void sh_pmu_read(struct perf_event *event)
+{
+ sh_perf_event_update(event, &event->hw, event->hw.idx);
+}
+
+static const struct pmu pmu = {
+ .enable = sh_pmu_enable,
+ .disable = sh_pmu_disable,
+ .read = sh_pmu_read,
+};
+
+const struct pmu *hw_perf_event_init(struct perf_event *event)
+{
+ int err = __hw_perf_event_init(event);
+ if (unlikely(err)) {
+ if (event->destroy)
+ event->destroy(event);
+ return ERR_PTR(err);
+ }
+
+ return &pmu;
+}
+
+void hw_perf_event_setup(int cpu)
+{
+ struct cpu_hw_events *cpuhw = &per_cpu(cpu_hw_events, cpu);
+
+ memset(cpuhw, 0, sizeof(struct cpu_hw_events));
+}
+
+void hw_perf_enable(void)
+{
+ if (!sh_pmu_initialized())
+ return;
+
+ sh_pmu->enable_all();
+}
+
+void hw_perf_disable(void)
+{
+ if (!sh_pmu_initialized())
+ return;
+
+ sh_pmu->disable_all();
+}
+
+int register_sh_pmu(struct sh_pmu *pmu)
+{
+ if (sh_pmu)
+ return -EBUSY;
+ sh_pmu = pmu;
+
+ pr_info("Performance Events: %s support registered\n", pmu->name);
+
+ WARN_ON(pmu->num_events > MAX_HWEVENTS);
+
+ return 0;
+}
diff --git a/arch/sh/kernel/process_32.c b/arch/sh/kernel/process_32.c
index 0673c47..d8af889 100644
--- a/arch/sh/kernel/process_32.c
+++ b/arch/sh/kernel/process_32.c
@@ -134,7 +134,10 @@
regs.regs[5] = (unsigned long)fn;
regs.pc = (unsigned long)kernel_thread_helper;
- regs.sr = (1 << 30);
+ regs.sr = SR_MD;
+#if defined(CONFIG_SH_FPU)
+ regs.sr |= SR_FD;
+#endif
/* Ok, create the new process.. */
pid = do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0,
@@ -142,6 +145,7 @@
return pid;
}
+EXPORT_SYMBOL(kernel_thread);
/*
* Free current thread data structures etc..
@@ -186,6 +190,16 @@
return fpvalid;
}
+EXPORT_SYMBOL(dump_fpu);
+
+/*
+ * This gets called before we allocate a new thread and copy
+ * the current task into it.
+ */
+void prepare_to_copy(struct task_struct *tsk)
+{
+ unlazy_fpu(tsk, task_pt_regs(tsk));
+}
asmlinkage void ret_from_fork(void);
@@ -195,16 +209,10 @@
{
struct thread_info *ti = task_thread_info(p);
struct pt_regs *childregs;
-#if defined(CONFIG_SH_FPU) || defined(CONFIG_SH_DSP)
+#if defined(CONFIG_SH_DSP)
struct task_struct *tsk = current;
#endif
-#if defined(CONFIG_SH_FPU)
- unlazy_fpu(tsk, regs);
- p->thread.fpu = tsk->thread.fpu;
- copy_to_stopped_child_used_math(p);
-#endif
-
#if defined(CONFIG_SH_DSP)
if (is_dsp_enabled(tsk)) {
/* We can use the __save_dsp or just copy the struct:
@@ -224,6 +232,8 @@
} else {
childregs->regs[15] = (unsigned long)childregs;
ti->addr_limit = KERNEL_DS;
+ ti->status &= ~TS_USEDFPU;
+ p->fpu_counter = 0;
}
if (clone_flags & CLONE_SETTLS)
@@ -288,9 +298,13 @@
__notrace_funcgraph struct task_struct *
__switch_to(struct task_struct *prev, struct task_struct *next)
{
-#if defined(CONFIG_SH_FPU)
+ struct thread_struct *next_t = &next->thread;
+
unlazy_fpu(prev, task_pt_regs(prev));
-#endif
+
+ /* we're going to use this soon, after a few expensive things */
+ if (next->fpu_counter > 5)
+ prefetch(&next_t->fpu.hard);
#ifdef CONFIG_MMU
/*
@@ -321,6 +335,14 @@
#endif
}
+ /*
+ * If the task has used fpu the last 5 timeslices, just do a full
+ * restore of the math state immediately to avoid the trap; the
+ * chances of needing FPU soon are obviously high now
+ */
+ if (next->fpu_counter > 5)
+ fpu_state_restore(task_pt_regs(next));
+
return prev;
}
diff --git a/arch/sh/kernel/process_64.c b/arch/sh/kernel/process_64.c
index 1192398..359b8a2 100644
--- a/arch/sh/kernel/process_64.c
+++ b/arch/sh/kernel/process_64.c
@@ -335,6 +335,7 @@
return do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0,
®s, 0, NULL, NULL);
}
+EXPORT_SYMBOL(kernel_thread);
/*
* Free current thread data structures etc..
@@ -417,6 +418,7 @@
return 0; /* Task didn't use the fpu at all. */
#endif
}
+EXPORT_SYMBOL(dump_fpu);
asmlinkage void ret_from_fork(void);
diff --git a/arch/sh/kernel/return_address.c b/arch/sh/kernel/return_address.c
new file mode 100644
index 0000000..df3ab58
--- /dev/null
+++ b/arch/sh/kernel/return_address.c
@@ -0,0 +1,54 @@
+/*
+ * arch/sh/kernel/return_address.c
+ *
+ * Copyright (C) 2009 Matt Fleming
+ * Copyright (C) 2009 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/kernel.h>
+#include <asm/dwarf.h>
+
+#ifdef CONFIG_DWARF_UNWINDER
+
+void *return_address(unsigned int depth)
+{
+ struct dwarf_frame *frame;
+ unsigned long ra;
+ int i;
+
+ for (i = 0, frame = NULL, ra = 0; i <= depth; i++) {
+ struct dwarf_frame *tmp;
+
+ tmp = dwarf_unwind_stack(ra, frame);
+
+ if (frame)
+ dwarf_free_frame(frame);
+
+ frame = tmp;
+
+ if (!frame || !frame->return_addr)
+ break;
+
+ ra = frame->return_addr;
+ }
+
+ /* Failed to unwind the stack to the specified depth. */
+ WARN_ON(i != depth + 1);
+
+ if (frame)
+ dwarf_free_frame(frame);
+
+ return (void *)ra;
+}
+
+#else
+
+void *return_address(unsigned int depth)
+{
+ return NULL;
+}
+
+#endif
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index 99b4fb5..5a947a2 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -453,6 +453,10 @@
paging_init();
+#ifdef CONFIG_PMB_ENABLE
+ pmb_init();
+#endif
+
#ifdef CONFIG_SMP
plat_smp_setup();
#endif
diff --git a/arch/sh/kernel/sh_ksyms_32.c b/arch/sh/kernel/sh_ksyms_32.c
index 444cce3..3896f26 100644
--- a/arch/sh/kernel/sh_ksyms_32.c
+++ b/arch/sh/kernel/sh_ksyms_32.c
@@ -1,37 +1,11 @@
#include <linux/module.h>
-#include <linux/smp.h>
-#include <linux/user.h>
-#include <linux/elfcore.h>
-#include <linux/sched.h>
-#include <linux/in6.h>
-#include <linux/interrupt.h>
-#include <linux/vmalloc.h>
-#include <linux/pci.h>
-#include <linux/irq.h>
-#include <asm/sections.h>
-#include <asm/processor.h>
-#include <asm/uaccess.h>
+#include <linux/string.h>
+#include <linux/uaccess.h>
+#include <linux/delay.h>
+#include <linux/mm.h>
#include <asm/checksum.h>
-#include <asm/io.h>
-#include <asm/delay.h>
-#include <asm/tlbflush.h>
-#include <asm/cacheflush.h>
-#include <asm/ftrace.h>
+#include <asm/sections.h>
-extern int dump_fpu(struct pt_regs *, elf_fpregset_t *);
-
-/* platform dependent support */
-EXPORT_SYMBOL(dump_fpu);
-EXPORT_SYMBOL(kernel_thread);
-EXPORT_SYMBOL(strlen);
-
-/* PCI exports */
-#ifdef CONFIG_PCI
-EXPORT_SYMBOL(pci_alloc_consistent);
-EXPORT_SYMBOL(pci_free_consistent);
-#endif
-
-/* mem exports */
EXPORT_SYMBOL(memchr);
EXPORT_SYMBOL(memcpy);
EXPORT_SYMBOL(memset);
@@ -40,6 +14,13 @@
EXPORT_SYMBOL(__udelay);
EXPORT_SYMBOL(__ndelay);
EXPORT_SYMBOL(__const_udelay);
+EXPORT_SYMBOL(strlen);
+EXPORT_SYMBOL(csum_partial);
+EXPORT_SYMBOL(csum_partial_copy_generic);
+EXPORT_SYMBOL(copy_page);
+EXPORT_SYMBOL(__clear_user);
+EXPORT_SYMBOL(_ebss);
+EXPORT_SYMBOL(empty_zero_page);
#define DECLARE_EXPORT(name) \
extern void name(void);EXPORT_SYMBOL(name)
@@ -107,30 +88,6 @@
DECLARE_EXPORT(__udivsi3_i4);
DECLARE_EXPORT(__sdivsi3_i4i);
DECLARE_EXPORT(__udivsi3_i4i);
-
-#if !defined(CONFIG_CACHE_OFF) && (defined(CONFIG_CPU_SH4) || \
- defined(CONFIG_SH7705_CACHE_32KB))
-/* needed by some modules */
-EXPORT_SYMBOL(flush_cache_all);
-EXPORT_SYMBOL(flush_cache_range);
-EXPORT_SYMBOL(flush_dcache_page);
-#endif
-
#ifdef CONFIG_MCOUNT
DECLARE_EXPORT(mcount);
#endif
-EXPORT_SYMBOL(csum_partial);
-EXPORT_SYMBOL(csum_partial_copy_generic);
-#ifdef CONFIG_IPV6
-EXPORT_SYMBOL(csum_ipv6_magic);
-#endif
-EXPORT_SYMBOL(copy_page);
-EXPORT_SYMBOL(__clear_user);
-EXPORT_SYMBOL(_ebss);
-EXPORT_SYMBOL(empty_zero_page);
-
-#ifndef CONFIG_CACHE_OFF
-EXPORT_SYMBOL(__flush_purge_region);
-EXPORT_SYMBOL(__flush_wback_region);
-EXPORT_SYMBOL(__flush_invalidate_region);
-#endif
diff --git a/arch/sh/kernel/sh_ksyms_64.c b/arch/sh/kernel/sh_ksyms_64.c
index d008e17..45afa5c 100644
--- a/arch/sh/kernel/sh_ksyms_64.c
+++ b/arch/sh/kernel/sh_ksyms_64.c
@@ -24,16 +24,6 @@
#include <asm/delay.h>
#include <asm/irq.h>
-extern int dump_fpu(struct pt_regs *, elf_fpregset_t *);
-
-/* platform dependent support */
-EXPORT_SYMBOL(dump_fpu);
-EXPORT_SYMBOL(kernel_thread);
-
-#ifdef CONFIG_VT
-EXPORT_SYMBOL(screen_info);
-#endif
-
EXPORT_SYMBOL(__put_user_asm_b);
EXPORT_SYMBOL(__put_user_asm_w);
EXPORT_SYMBOL(__put_user_asm_l);
diff --git a/arch/sh/kernel/signal_32.c b/arch/sh/kernel/signal_32.c
index 3db3742..12815ce 100644
--- a/arch/sh/kernel/signal_32.c
+++ b/arch/sh/kernel/signal_32.c
@@ -67,7 +67,8 @@
current->state = TASK_INTERRUPTIBLE;
schedule();
- set_thread_flag(TIF_RESTORE_SIGMASK);
+ set_restore_sigmask();
+
return -ERESTARTNOHAND;
}
@@ -590,7 +591,7 @@
if (try_to_freeze())
goto no_signal;
- if (test_thread_flag(TIF_RESTORE_SIGMASK))
+ if (current_thread_info()->status & TS_RESTORE_SIGMASK)
oldset = ¤t->saved_sigmask;
else
oldset = ¤t->blocked;
@@ -602,12 +603,13 @@
/* Whee! Actually deliver the signal. */
if (handle_signal(signr, &ka, &info, oldset,
regs, save_r0) == 0) {
- /* a signal was successfully delivered; the saved
+ /*
+ * A signal was successfully delivered; the saved
* sigmask will have been stored in the signal frame,
* and will be restored by sigreturn, so we can simply
- * clear the TIF_RESTORE_SIGMASK flag */
- if (test_thread_flag(TIF_RESTORE_SIGMASK))
- clear_thread_flag(TIF_RESTORE_SIGMASK);
+ * clear the TS_RESTORE_SIGMASK flag
+ */
+ current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
tracehook_signal_handler(signr, &info, &ka, regs,
test_thread_flag(TIF_SINGLESTEP));
@@ -631,10 +633,12 @@
}
}
- /* if there's no signal to deliver, we just put the saved sigmask
- * back */
- if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
- clear_thread_flag(TIF_RESTORE_SIGMASK);
+ /*
+ * If there's no signal to deliver, we just put the saved sigmask
+ * back.
+ */
+ if (current_thread_info()->status & TS_RESTORE_SIGMASK) {
+ current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL);
}
}
diff --git a/arch/sh/kernel/signal_64.c b/arch/sh/kernel/signal_64.c
index 74793c8..feb3ddd 100644
--- a/arch/sh/kernel/signal_64.c
+++ b/arch/sh/kernel/signal_64.c
@@ -101,7 +101,7 @@
if (try_to_freeze())
goto no_signal;
- if (test_thread_flag(TIF_RESTORE_SIGMASK))
+ if (current_thread_info()->status & TS_RESTORE_SIGMASK)
oldset = ¤t->saved_sigmask;
else if (!oldset)
oldset = ¤t->blocked;
@@ -115,11 +115,9 @@
/*
* If a signal was successfully delivered, the
* saved sigmask is in its frame, and we can
- * clear the TIF_RESTORE_SIGMASK flag.
+ * clear the TS_RESTORE_SIGMASK flag.
*/
- if (test_thread_flag(TIF_RESTORE_SIGMASK))
- clear_thread_flag(TIF_RESTORE_SIGMASK);
-
+ current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
tracehook_signal_handler(signr, &info, &ka, regs, 0);
return 1;
}
@@ -146,8 +144,8 @@
}
/* No signal to deliver -- put the saved sigmask back */
- if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
- clear_thread_flag(TIF_RESTORE_SIGMASK);
+ if (current_thread_info()->status & TS_RESTORE_SIGMASK) {
+ current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL);
}
@@ -176,6 +174,7 @@
while (1) {
current->state = TASK_INTERRUPTIBLE;
schedule();
+ set_restore_sigmask();
regs->pc += 4; /* because sys_sigreturn decrements the pc */
if (do_signal(regs, &saveset)) {
/* pc now points at signal handler. Need to decrement
diff --git a/arch/sh/kernel/smp.c b/arch/sh/kernel/smp.c
index 160db10..983e079 100644
--- a/arch/sh/kernel/smp.c
+++ b/arch/sh/kernel/smp.c
@@ -122,7 +122,9 @@
stack_start.bss_start = 0; /* don't clear bss for secondary cpus */
stack_start.start_kernel_fn = start_secondary;
- flush_cache_all();
+ flush_icache_range((unsigned long)&stack_start,
+ (unsigned long)&stack_start + sizeof(stack_start));
+ wmb();
plat_start_cpu(cpu, (unsigned long)_stext);
diff --git a/arch/sh/kernel/topology.c b/arch/sh/kernel/topology.c
index 0838942..9b0b633 100644
--- a/arch/sh/kernel/topology.c
+++ b/arch/sh/kernel/topology.c
@@ -16,6 +16,32 @@
static DEFINE_PER_CPU(struct cpu, cpu_devices);
+cpumask_t cpu_core_map[NR_CPUS];
+
+static cpumask_t cpu_coregroup_map(unsigned int cpu)
+{
+ /*
+ * Presently all SH-X3 SMP cores are multi-cores, so just keep it
+ * simple until we have a method for determining topology..
+ */
+ return cpu_possible_map;
+}
+
+const struct cpumask *cpu_coregroup_mask(unsigned int cpu)
+{
+ return &cpu_core_map[cpu];
+}
+
+int arch_update_cpu_topology(void)
+{
+ unsigned int cpu;
+
+ for_each_possible_cpu(cpu)
+ cpu_core_map[cpu] = cpu_coregroup_map(cpu);
+
+ return 0;
+}
+
static int __init topology_init(void)
{
int i, ret;
diff --git a/arch/sh/kernel/traps.c b/arch/sh/kernel/traps.c
index a8396f3..7b03633 100644
--- a/arch/sh/kernel/traps.c
+++ b/arch/sh/kernel/traps.c
@@ -9,8 +9,8 @@
#include <asm/unwinder.h>
#include <asm/system.h>
-#ifdef CONFIG_BUG
-void handle_BUG(struct pt_regs *regs)
+#ifdef CONFIG_GENERIC_BUG
+static void handle_BUG(struct pt_regs *regs)
{
const struct bug_entry *bug;
unsigned long bugaddr = regs->pc;
@@ -81,7 +81,7 @@
SIGTRAP) == NOTIFY_STOP)
return;
-#ifdef CONFIG_BUG
+#ifdef CONFIG_GENERIC_BUG
if (__kernel_text_address(instruction_pointer(regs))) {
insn_size_t insn = *(insn_size_t *)instruction_pointer(regs);
if (insn == TRAPA_BUG_OPCODE)
@@ -95,9 +95,11 @@
BUILD_TRAP_HANDLER(nmi)
{
+ unsigned int cpu = smp_processor_id();
TRAP_HANDLER_DECL;
nmi_enter();
+ nmi_count(cpu)++;
switch (notify_die(DIE_NMI, "NMI", regs, 0, vec & 0xff, SIGINT)) {
case NOTIFY_OK:
diff --git a/arch/sh/kernel/traps_32.c b/arch/sh/kernel/traps_32.c
index 7a2ee3a..3da5a12 100644
--- a/arch/sh/kernel/traps_32.c
+++ b/arch/sh/kernel/traps_32.c
@@ -25,6 +25,7 @@
#include <linux/kexec.h>
#include <linux/limits.h>
#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
#include <linux/sysfs.h>
#include <asm/system.h>
#include <asm/uaccess.h>
@@ -68,61 +69,49 @@
"signal+warn"
};
-static int
-proc_alignment_read(char *page, char **start, off_t off, int count, int *eof,
- void *data)
+static int alignment_proc_show(struct seq_file *m, void *v)
{
- char *p = page;
- int len;
-
- p += sprintf(p, "User:\t\t%lu\n", se_user);
- p += sprintf(p, "System:\t\t%lu\n", se_sys);
- p += sprintf(p, "Half:\t\t%lu\n", se_half);
- p += sprintf(p, "Word:\t\t%lu\n", se_word);
- p += sprintf(p, "DWord:\t\t%lu\n", se_dword);
- p += sprintf(p, "Multi:\t\t%lu\n", se_multi);
- p += sprintf(p, "User faults:\t%i (%s)\n", se_usermode,
+ seq_printf(m, "User:\t\t%lu\n", se_user);
+ seq_printf(m, "System:\t\t%lu\n", se_sys);
+ seq_printf(m, "Half:\t\t%lu\n", se_half);
+ seq_printf(m, "Word:\t\t%lu\n", se_word);
+ seq_printf(m, "DWord:\t\t%lu\n", se_dword);
+ seq_printf(m, "Multi:\t\t%lu\n", se_multi);
+ seq_printf(m, "User faults:\t%i (%s)\n", se_usermode,
se_usermode_action[se_usermode]);
- p += sprintf(p, "Kernel faults:\t%i (fixup%s)\n", se_kernmode_warn,
+ seq_printf(m, "Kernel faults:\t%i (fixup%s)\n", se_kernmode_warn,
se_kernmode_warn ? "+warn" : "");
-
- len = (p - page) - off;
- if (len < 0)
- len = 0;
-
- *eof = (len <= count) ? 1 : 0;
- *start = page + off;
-
- return len;
+ return 0;
}
-static int proc_alignment_write(struct file *file, const char __user *buffer,
- unsigned long count, void *data)
+static int alignment_proc_open(struct inode *inode, struct file *file)
{
+ return single_open(file, alignment_proc_show, NULL);
+}
+
+static ssize_t alignment_proc_write(struct file *file,
+ const char __user *buffer, size_t count, loff_t *pos)
+{
+ int *data = PDE(file->f_path.dentry->d_inode)->data;
char mode;
if (count > 0) {
if (get_user(mode, buffer))
return -EFAULT;
if (mode >= '0' && mode <= '5')
- se_usermode = mode - '0';
+ *data = mode - '0';
}
return count;
}
-static int proc_alignment_kern_write(struct file *file, const char __user *buffer,
- unsigned long count, void *data)
-{
- char mode;
-
- if (count > 0) {
- if (get_user(mode, buffer))
- return -EFAULT;
- if (mode >= '0' && mode <= '1')
- se_kernmode_warn = mode - '0';
- }
- return count;
-}
+static const struct file_operations alignment_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = alignment_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .write = alignment_proc_write,
+};
#endif
static void dump_mem(const char *str, unsigned long bottom, unsigned long top)
@@ -945,14 +934,9 @@
set_exception_table_evt(0x800, do_reserved_inst);
set_exception_table_evt(0x820, do_illegal_slot_inst);
#elif defined(CONFIG_SH_FPU)
-#ifdef CONFIG_CPU_SUBTYPE_SHX3
- set_exception_table_evt(0xd80, fpu_state_restore_trap_handler);
- set_exception_table_evt(0xda0, fpu_state_restore_trap_handler);
-#else
set_exception_table_evt(0x800, fpu_state_restore_trap_handler);
set_exception_table_evt(0x820, fpu_state_restore_trap_handler);
#endif
-#endif
#ifdef CONFIG_CPU_SH2
set_exception_table_vec(TRAP_ADDRESS_ERROR, address_error_trap_handler);
@@ -1011,20 +995,16 @@
if (!dir)
return -ENOMEM;
- res = create_proc_entry("alignment", S_IWUSR | S_IRUGO, dir);
+ res = proc_create_data("alignment", S_IWUSR | S_IRUGO, dir,
+ &alignment_proc_fops, &se_usermode);
if (!res)
return -ENOMEM;
- res->read_proc = proc_alignment_read;
- res->write_proc = proc_alignment_write;
-
- res = create_proc_entry("kernel_alignment", S_IWUSR | S_IRUGO, dir);
+ res = proc_create_data("kernel_alignment", S_IWUSR | S_IRUGO, dir,
+ &alignment_proc_fops, &se_kernmode_warn);
if (!res)
return -ENOMEM;
- res->read_proc = proc_alignment_read;
- res->write_proc = proc_alignment_kern_write;
-
return 0;
}
diff --git a/arch/sh/lib/Makefile b/arch/sh/lib/Makefile
index a969b47..dab4d21 100644
--- a/arch/sh/lib/Makefile
+++ b/arch/sh/lib/Makefile
@@ -2,7 +2,7 @@
# Makefile for SuperH-specific library files..
#
-lib-y = delay.o memset.o memmove.o memchr.o \
+lib-y = delay.o memmove.o memchr.o \
checksum.o strlen.o div64.o div64-generic.o
# Extracted from libgcc
@@ -23,8 +23,11 @@
memcpy-y := memcpy.o
memcpy-$(CONFIG_CPU_SH4) := memcpy-sh4.o
+memset-y := memset.o
+memset-$(CONFIG_CPU_SH4) := memset-sh4.o
+
lib-$(CONFIG_MMU) += copy_page.o __clear_user.o
lib-$(CONFIG_MCOUNT) += mcount.o
-lib-y += $(memcpy-y) $(udivsi3-y)
+lib-y += $(memcpy-y) $(memset-y) $(udivsi3-y)
EXTRA_CFLAGS += -Werror
diff --git a/arch/sh/lib/memset-sh4.S b/arch/sh/lib/memset-sh4.S
new file mode 100644
index 0000000..1a6e32c
--- /dev/null
+++ b/arch/sh/lib/memset-sh4.S
@@ -0,0 +1,107 @@
+/*
+ * "memset" implementation for SH4
+ *
+ * Copyright (C) 1999 Niibe Yutaka
+ * Copyright (c) 2009 STMicroelectronics Limited
+ * Author: Stuart Menefy <stuart.menefy:st.com>
+ */
+
+/*
+ * void *memset(void *s, int c, size_t n);
+ */
+
+#include <linux/linkage.h>
+
+ENTRY(memset)
+ mov #12,r0
+ add r6,r4
+ cmp/gt r6,r0
+ bt/s 40f ! if it's too small, set a byte at once
+ mov r4,r0
+ and #3,r0
+ cmp/eq #0,r0
+ bt/s 2f ! It's aligned
+ sub r0,r6
+1:
+ dt r0
+ bf/s 1b
+ mov.b r5,@-r4
+2: ! make VVVV
+ extu.b r5,r5
+ swap.b r5,r0 ! V0
+ or r0,r5 ! VV
+ swap.w r5,r0 ! VV00
+ or r0,r5 ! VVVV
+
+ ! Check if enough bytes need to be copied to be worth the big loop
+ mov #0x40, r0 ! (MT)
+ cmp/gt r6,r0 ! (MT) 64 > len => slow loop
+
+ bt/s 22f
+ mov r6,r0
+
+ ! align the dst to the cache block size if necessary
+ mov r4, r3
+ mov #~(0x1f), r1
+
+ and r3, r1
+ cmp/eq r3, r1
+
+ bt/s 11f ! dst is already aligned
+ sub r1, r3 ! r3-r1 -> r3
+ shlr2 r3 ! number of loops
+
+10: mov.l r5,@-r4
+ dt r3
+ bf/s 10b
+ add #-4, r6
+
+11: ! dst is 32byte aligned
+ mov r6,r2
+ mov #-5,r0
+ shld r0,r2 ! number of loops
+
+ add #-32, r4
+ mov r5, r0
+12:
+ movca.l r0,@r4
+ mov.l r5,@(4, r4)
+ mov.l r5,@(8, r4)
+ mov.l r5,@(12,r4)
+ mov.l r5,@(16,r4)
+ mov.l r5,@(20,r4)
+ add #-0x20, r6
+ mov.l r5,@(24,r4)
+ dt r2
+ mov.l r5,@(28,r4)
+ bf/s 12b
+ add #-32, r4
+
+ add #32, r4
+ mov #8, r0
+ cmp/ge r0, r6
+ bf 40f
+
+ mov r6,r0
+22:
+ shlr2 r0
+ shlr r0 ! r0 = r6 >> 3
+3:
+ dt r0
+ mov.l r5,@-r4 ! set 8-byte at once
+ bf/s 3b
+ mov.l r5,@-r4
+ !
+ mov #7,r0
+ and r0,r6
+
+ ! fill bytes (length may be zero)
+40: tst r6,r6
+ bt 5f
+4:
+ dt r6
+ bf/s 4b
+ mov.b r5,@-r4
+5:
+ rts
+ mov r4,r0
diff --git a/arch/sh/math-emu/math.c b/arch/sh/math-emu/math.c
index ac2d7ab..d6c15ca 100644
--- a/arch/sh/math-emu/math.c
+++ b/arch/sh/math-emu/math.c
@@ -558,7 +558,7 @@
(finsn >> 8) & 0xf);
tsk->thread.fpu.hard.fpscr &=
~(FPSCR_CAUSE_MASK | FPSCR_FLAG_MASK);
- set_tsk_thread_flag(tsk, TIF_USEDFPU);
+ task_thread_info(tsk)->status |= TS_USEDFPU;
} else {
info.si_signo = SIGFPE;
info.si_errno = 0;
@@ -619,10 +619,10 @@
struct task_struct *tsk = current;
struct sh_fpu_soft_struct *fpu = &(tsk->thread.fpu.soft);
- if (!test_tsk_thread_flag(tsk, TIF_USEDFPU)) {
+ if (!(task_thread_info(tsk)->status & TS_USEDFPU)) {
/* initialize once. */
fpu_init(fpu);
- set_tsk_thread_flag(tsk, TIF_USEDFPU);
+ task_thread_info(tsk)->status |= TS_USEDFPU;
}
return fpu_emulate(inst, fpu, regs);
diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig
index 7f7b52f..0e7ba8e 100644
--- a/arch/sh/mm/Kconfig
+++ b/arch/sh/mm/Kconfig
@@ -82,8 +82,7 @@
config PMB_ENABLE
bool "Support 32-bit physical addressing through PMB"
- depends on MMU && EXPERIMENTAL && (CPU_SUBTYPE_SH7757 || CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785)
- select 32BIT
+ depends on MMU && EXPERIMENTAL && CPU_SH4A
default y
help
If you say Y here, physical addressing will be extended to
@@ -97,8 +96,7 @@
config PMB
bool "PMB"
- depends on MMU && EXPERIMENTAL && (CPU_SUBTYPE_SH7757 || CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785)
- select 32BIT
+ depends on MMU && EXPERIMENTAL && CPU_SH4A
help
If you say Y here, physical addressing will be extended to
32-bits through the SH-4A PMB. If this is not set, legacy
@@ -106,9 +104,7 @@
config PMB_FIXED
bool "fixed PMB"
- depends on MMU && EXPERIMENTAL && (CPU_SUBTYPE_SH7757 || \
- CPU_SUBTYPE_SH7780 || \
- CPU_SUBTYPE_SH7785)
+ depends on MMU && EXPERIMENTAL && CPU_SH4A
select 32BIT
help
If this option is enabled, fixed PMB mappings are inherited
@@ -258,6 +254,15 @@
source "mm/Kconfig"
+config SCHED_MC
+ bool "Multi-core scheduler support"
+ depends on SMP
+ default y
+ help
+ Multi-core scheduler support improves the CPU scheduler's decision
+ making when dealing with multi-core CPU chips at a cost of slightly
+ increased overhead in some places. If unsure say N here.
+
endmenu
menu "Cache configuration"
diff --git a/arch/sh/mm/Makefile b/arch/sh/mm/Makefile
index 3759bf8..8a70535 100644
--- a/arch/sh/mm/Makefile
+++ b/arch/sh/mm/Makefile
@@ -33,8 +33,7 @@
endif
obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
-obj-$(CONFIG_PMB) += pmb.o
-obj-$(CONFIG_PMB_FIXED) += pmb-fixed.o
+obj-$(CONFIG_PMB_ENABLE) += pmb.o
obj-$(CONFIG_NUMA) += numa.o
# Special flags for fault_64.o. This puts restrictions on the number of
diff --git a/arch/sh/mm/cache-sh4.c b/arch/sh/mm/cache-sh4.c
index b7f235c..f36a08b 100644
--- a/arch/sh/mm/cache-sh4.c
+++ b/arch/sh/mm/cache-sh4.c
@@ -2,7 +2,7 @@
* arch/sh/mm/cache-sh4.c
*
* Copyright (C) 1999, 2000, 2002 Niibe Yutaka
- * Copyright (C) 2001 - 2007 Paul Mundt
+ * Copyright (C) 2001 - 2009 Paul Mundt
* Copyright (C) 2003 Richard Curnow
* Copyright (c) 2007 STMicroelectronics (R&D) Ltd.
*
@@ -15,6 +15,8 @@
#include <linux/io.h>
#include <linux/mutex.h>
#include <linux/fs.h>
+#include <linux/highmem.h>
+#include <asm/pgtable.h>
#include <asm/mmu_context.h>
#include <asm/cacheflush.h>
@@ -23,21 +25,12 @@
* flushing. Anything exceeding this will simply flush the dcache in its
* entirety.
*/
-#define MAX_DCACHE_PAGES 64 /* XXX: Tune for ways */
#define MAX_ICACHE_PAGES 32
static void __flush_cache_one(unsigned long addr, unsigned long phys,
unsigned long exec_offset);
/*
- * This is initialised here to ensure that it is not placed in the BSS. If
- * that were to happen, note that cache_init gets called before the BSS is
- * cleared, so this would get nulled out which would be hopeless.
- */
-static void (*__flush_dcache_segment_fn)(unsigned long, unsigned long) =
- (void (*)(unsigned long, unsigned long))0xdeadbeef;
-
-/*
* Write back the range of D-cache, and purge the I-cache.
*
* Called from kernel/module.c:sys_init_module and routine for a.out format,
@@ -97,15 +90,15 @@
unsigned long flags, exec_offset = 0;
/*
- * All types of SH-4 require PC to be in P2 to operate on the I-cache.
- * Some types of SH-4 require PC to be in P2 to operate on the D-cache.
+ * All types of SH-4 require PC to be uncached to operate on the I-cache.
+ * Some types of SH-4 require PC to be uncached to operate on the D-cache.
*/
if ((boot_cpu_data.flags & CPU_HAS_P2_FLUSH_BUG) ||
(start < CACHE_OC_ADDRESS_ARRAY))
- exec_offset = 0x20000000;
+ exec_offset = cached_to_uncached;
local_irq_save(flags);
- __flush_cache_one(start | SH_CACHE_ASSOC, P1SEGADDR(phys), exec_offset);
+ __flush_cache_one(start, phys, exec_offset);
local_irq_restore(flags);
}
@@ -124,7 +117,7 @@
else
#endif
{
- unsigned long phys = PHYSADDR(page_address(page));
+ unsigned long phys = page_to_phys(page);
unsigned long addr = CACHE_OC_ADDRESS_ARRAY;
int i, n;
@@ -159,10 +152,27 @@
local_irq_restore(flags);
}
-static inline void flush_dcache_all(void)
+static void flush_dcache_all(void)
{
- (*__flush_dcache_segment_fn)(0UL, boot_cpu_data.dcache.way_size);
- wmb();
+ unsigned long addr, end_addr, entry_offset;
+
+ end_addr = CACHE_OC_ADDRESS_ARRAY +
+ (current_cpu_data.dcache.sets <<
+ current_cpu_data.dcache.entry_shift) *
+ current_cpu_data.dcache.ways;
+
+ entry_offset = 1 << current_cpu_data.dcache.entry_shift;
+
+ for (addr = CACHE_OC_ADDRESS_ARRAY; addr < end_addr; ) {
+ __raw_writel(0, addr); addr += entry_offset;
+ __raw_writel(0, addr); addr += entry_offset;
+ __raw_writel(0, addr); addr += entry_offset;
+ __raw_writel(0, addr); addr += entry_offset;
+ __raw_writel(0, addr); addr += entry_offset;
+ __raw_writel(0, addr); addr += entry_offset;
+ __raw_writel(0, addr); addr += entry_offset;
+ __raw_writel(0, addr); addr += entry_offset;
+ }
}
static void sh4_flush_cache_all(void *unused)
@@ -171,89 +181,13 @@
flush_icache_all();
}
-static void __flush_cache_mm(struct mm_struct *mm, unsigned long start,
- unsigned long end)
-{
- unsigned long d = 0, p = start & PAGE_MASK;
- unsigned long alias_mask = boot_cpu_data.dcache.alias_mask;
- unsigned long n_aliases = boot_cpu_data.dcache.n_aliases;
- unsigned long select_bit;
- unsigned long all_aliases_mask;
- unsigned long addr_offset;
- pgd_t *dir;
- pmd_t *pmd;
- pud_t *pud;
- pte_t *pte;
- int i;
-
- dir = pgd_offset(mm, p);
- pud = pud_offset(dir, p);
- pmd = pmd_offset(pud, p);
- end = PAGE_ALIGN(end);
-
- all_aliases_mask = (1 << n_aliases) - 1;
-
- do {
- if (pmd_none(*pmd) || unlikely(pmd_bad(*pmd))) {
- p &= PMD_MASK;
- p += PMD_SIZE;
- pmd++;
-
- continue;
- }
-
- pte = pte_offset_kernel(pmd, p);
-
- do {
- unsigned long phys;
- pte_t entry = *pte;
-
- if (!(pte_val(entry) & _PAGE_PRESENT)) {
- pte++;
- p += PAGE_SIZE;
- continue;
- }
-
- phys = pte_val(entry) & PTE_PHYS_MASK;
-
- if ((p ^ phys) & alias_mask) {
- d |= 1 << ((p & alias_mask) >> PAGE_SHIFT);
- d |= 1 << ((phys & alias_mask) >> PAGE_SHIFT);
-
- if (d == all_aliases_mask)
- goto loop_exit;
- }
-
- pte++;
- p += PAGE_SIZE;
- } while (p < end && ((unsigned long)pte & ~PAGE_MASK));
- pmd++;
- } while (p < end);
-
-loop_exit:
- addr_offset = 0;
- select_bit = 1;
-
- for (i = 0; i < n_aliases; i++) {
- if (d & select_bit) {
- (*__flush_dcache_segment_fn)(addr_offset, PAGE_SIZE);
- wmb();
- }
-
- select_bit <<= 1;
- addr_offset += PAGE_SIZE;
- }
-}
-
/*
* Note : (RPC) since the caches are physically tagged, the only point
* of flush_cache_mm for SH-4 is to get rid of aliases from the
* D-cache. The assumption elsewhere, e.g. flush_cache_range, is that
* lines can stay resident so long as the virtual address they were
* accessed with (hence cache set) is in accord with the physical
- * address (i.e. tag). It's no different here. So I reckon we don't
- * need to flush the I-cache, since aliases don't matter for that. We
- * should try that.
+ * address (i.e. tag). It's no different here.
*
* Caller takes mm->mmap_sem.
*/
@@ -264,33 +198,7 @@
if (cpu_context(smp_processor_id(), mm) == NO_CONTEXT)
return;
- /*
- * If cache is only 4k-per-way, there are never any 'aliases'. Since
- * the cache is physically tagged, the data can just be left in there.
- */
- if (boot_cpu_data.dcache.n_aliases == 0)
- return;
-
- /*
- * Don't bother groveling around the dcache for the VMA ranges
- * if there are too many PTEs to make it worthwhile.
- */
- if (mm->nr_ptes >= MAX_DCACHE_PAGES)
- flush_dcache_all();
- else {
- struct vm_area_struct *vma;
-
- /*
- * In this case there are reasonably sized ranges to flush,
- * iterate through the VMA list and take care of any aliases.
- */
- for (vma = mm->mmap; vma; vma = vma->vm_next)
- __flush_cache_mm(mm, vma->vm_start, vma->vm_end);
- }
-
- /* Only touch the icache if one of the VMAs has VM_EXEC set. */
- if (mm->exec_vm)
- flush_icache_all();
+ flush_dcache_all();
}
/*
@@ -303,44 +211,63 @@
{
struct flusher_data *data = args;
struct vm_area_struct *vma;
+ struct page *page;
unsigned long address, pfn, phys;
- unsigned int alias_mask;
+ int map_coherent = 0;
+ pgd_t *pgd;
+ pud_t *pud;
+ pmd_t *pmd;
+ pte_t *pte;
+ void *vaddr;
vma = data->vma;
- address = data->addr1;
+ address = data->addr1 & PAGE_MASK;
pfn = data->addr2;
phys = pfn << PAGE_SHIFT;
+ page = pfn_to_page(pfn);
if (cpu_context(smp_processor_id(), vma->vm_mm) == NO_CONTEXT)
return;
- alias_mask = boot_cpu_data.dcache.alias_mask;
+ pgd = pgd_offset(vma->vm_mm, address);
+ pud = pud_offset(pgd, address);
+ pmd = pmd_offset(pud, address);
+ pte = pte_offset_kernel(pmd, address);
- /* We only need to flush D-cache when we have alias */
- if ((address^phys) & alias_mask) {
- /* Loop 4K of the D-cache */
- flush_cache_one(
- CACHE_OC_ADDRESS_ARRAY | (address & alias_mask),
- phys);
- /* Loop another 4K of the D-cache */
- flush_cache_one(
- CACHE_OC_ADDRESS_ARRAY | (phys & alias_mask),
- phys);
+ /* If the page isn't present, there is nothing to do here. */
+ if (!(pte_val(*pte) & _PAGE_PRESENT))
+ return;
+
+ if ((vma->vm_mm == current->active_mm))
+ vaddr = NULL;
+ else {
+ /*
+ * Use kmap_coherent or kmap_atomic to do flushes for
+ * another ASID than the current one.
+ */
+ map_coherent = (current_cpu_data.dcache.n_aliases &&
+ !test_bit(PG_dcache_dirty, &page->flags) &&
+ page_mapped(page));
+ if (map_coherent)
+ vaddr = kmap_coherent(page, address);
+ else
+ vaddr = kmap_atomic(page, KM_USER0);
+
+ address = (unsigned long)vaddr;
}
- alias_mask = boot_cpu_data.icache.alias_mask;
- if (vma->vm_flags & VM_EXEC) {
- /*
- * Evict entries from the portion of the cache from which code
- * may have been executed at this address (virtual). There's
- * no need to evict from the portion corresponding to the
- * physical address as for the D-cache, because we know the
- * kernel has never executed the code through its identity
- * translation.
- */
- flush_cache_one(
- CACHE_IC_ADDRESS_ARRAY | (address & alias_mask),
- phys);
+ if (pages_do_alias(address, phys))
+ flush_cache_one(CACHE_OC_ADDRESS_ARRAY |
+ (address & shm_align_mask), phys);
+
+ if (vma->vm_flags & VM_EXEC)
+ flush_icache_all();
+
+ if (vaddr) {
+ if (map_coherent)
+ kunmap_coherent(vaddr);
+ else
+ kunmap_atomic(vaddr, KM_USER0);
}
}
@@ -373,24 +300,10 @@
if (boot_cpu_data.dcache.n_aliases == 0)
return;
- /*
- * Don't bother with the lookup and alias check if we have a
- * wide range to cover, just blow away the dcache in its
- * entirety instead. -- PFM.
- */
- if (((end - start) >> PAGE_SHIFT) >= MAX_DCACHE_PAGES)
- flush_dcache_all();
- else
- __flush_cache_mm(vma->vm_mm, start, end);
+ flush_dcache_all();
- if (vma->vm_flags & VM_EXEC) {
- /*
- * TODO: Is this required??? Need to look at how I-cache
- * coherency is assured when new programs are loaded to see if
- * this matters.
- */
+ if (vma->vm_flags & VM_EXEC)
flush_icache_all();
- }
}
/**
@@ -464,245 +377,6 @@
} while (--way_count != 0);
}
-/*
- * Break the 1, 2 and 4 way variants of this out into separate functions to
- * avoid nearly all the overhead of having the conditional stuff in the function
- * bodies (+ the 1 and 2 way cases avoid saving any registers too).
- *
- * We want to eliminate unnecessary bus transactions, so this code uses
- * a non-obvious technique.
- *
- * Loop over a cache way sized block of, one cache line at a time. For each
- * line, use movca.a to cause the current cache line contents to be written
- * back, but without reading anything from main memory. However this has the
- * side effect that the cache is now caching that memory location. So follow
- * this with a cache invalidate to mark the cache line invalid. And do all
- * this with interrupts disabled, to avoid the cache line being accidently
- * evicted while it is holding garbage.
- *
- * This also breaks in a number of circumstances:
- * - if there are modifications to the region of memory just above
- * empty_zero_page (for example because a breakpoint has been placed
- * there), then these can be lost.
- *
- * This is because the the memory address which the cache temporarily
- * caches in the above description is empty_zero_page. So the
- * movca.l hits the cache (it is assumed that it misses, or at least
- * isn't dirty), modifies the line and then invalidates it, losing the
- * required change.
- *
- * - If caches are disabled or configured in write-through mode, then
- * the movca.l writes garbage directly into memory.
- */
-static void __flush_dcache_segment_writethrough(unsigned long start,
- unsigned long extent_per_way)
-{
- unsigned long addr;
- int i;
-
- addr = CACHE_OC_ADDRESS_ARRAY | (start & cpu_data->dcache.entry_mask);
-
- while (extent_per_way) {
- for (i = 0; i < cpu_data->dcache.ways; i++)
- __raw_writel(0, addr + cpu_data->dcache.way_incr * i);
-
- addr += cpu_data->dcache.linesz;
- extent_per_way -= cpu_data->dcache.linesz;
- }
-}
-
-static void __flush_dcache_segment_1way(unsigned long start,
- unsigned long extent_per_way)
-{
- unsigned long orig_sr, sr_with_bl;
- unsigned long base_addr;
- unsigned long way_incr, linesz, way_size;
- struct cache_info *dcache;
- register unsigned long a0, a0e;
-
- asm volatile("stc sr, %0" : "=r" (orig_sr));
- sr_with_bl = orig_sr | (1<<28);
- base_addr = ((unsigned long)&empty_zero_page[0]);
-
- /*
- * The previous code aligned base_addr to 16k, i.e. the way_size of all
- * existing SH-4 D-caches. Whilst I don't see a need to have this
- * aligned to any better than the cache line size (which it will be
- * anyway by construction), let's align it to at least the way_size of
- * any existing or conceivable SH-4 D-cache. -- RPC
- */
- base_addr = ((base_addr >> 16) << 16);
- base_addr |= start;
-
- dcache = &boot_cpu_data.dcache;
- linesz = dcache->linesz;
- way_incr = dcache->way_incr;
- way_size = dcache->way_size;
-
- a0 = base_addr;
- a0e = base_addr + extent_per_way;
- do {
- asm volatile("ldc %0, sr" : : "r" (sr_with_bl));
- asm volatile("movca.l r0, @%0\n\t"
- "ocbi @%0" : : "r" (a0));
- a0 += linesz;
- asm volatile("movca.l r0, @%0\n\t"
- "ocbi @%0" : : "r" (a0));
- a0 += linesz;
- asm volatile("movca.l r0, @%0\n\t"
- "ocbi @%0" : : "r" (a0));
- a0 += linesz;
- asm volatile("movca.l r0, @%0\n\t"
- "ocbi @%0" : : "r" (a0));
- asm volatile("ldc %0, sr" : : "r" (orig_sr));
- a0 += linesz;
- } while (a0 < a0e);
-}
-
-static void __flush_dcache_segment_2way(unsigned long start,
- unsigned long extent_per_way)
-{
- unsigned long orig_sr, sr_with_bl;
- unsigned long base_addr;
- unsigned long way_incr, linesz, way_size;
- struct cache_info *dcache;
- register unsigned long a0, a1, a0e;
-
- asm volatile("stc sr, %0" : "=r" (orig_sr));
- sr_with_bl = orig_sr | (1<<28);
- base_addr = ((unsigned long)&empty_zero_page[0]);
-
- /* See comment under 1-way above */
- base_addr = ((base_addr >> 16) << 16);
- base_addr |= start;
-
- dcache = &boot_cpu_data.dcache;
- linesz = dcache->linesz;
- way_incr = dcache->way_incr;
- way_size = dcache->way_size;
-
- a0 = base_addr;
- a1 = a0 + way_incr;
- a0e = base_addr + extent_per_way;
- do {
- asm volatile("ldc %0, sr" : : "r" (sr_with_bl));
- asm volatile("movca.l r0, @%0\n\t"
- "movca.l r0, @%1\n\t"
- "ocbi @%0\n\t"
- "ocbi @%1" : :
- "r" (a0), "r" (a1));
- a0 += linesz;
- a1 += linesz;
- asm volatile("movca.l r0, @%0\n\t"
- "movca.l r0, @%1\n\t"
- "ocbi @%0\n\t"
- "ocbi @%1" : :
- "r" (a0), "r" (a1));
- a0 += linesz;
- a1 += linesz;
- asm volatile("movca.l r0, @%0\n\t"
- "movca.l r0, @%1\n\t"
- "ocbi @%0\n\t"
- "ocbi @%1" : :
- "r" (a0), "r" (a1));
- a0 += linesz;
- a1 += linesz;
- asm volatile("movca.l r0, @%0\n\t"
- "movca.l r0, @%1\n\t"
- "ocbi @%0\n\t"
- "ocbi @%1" : :
- "r" (a0), "r" (a1));
- asm volatile("ldc %0, sr" : : "r" (orig_sr));
- a0 += linesz;
- a1 += linesz;
- } while (a0 < a0e);
-}
-
-static void __flush_dcache_segment_4way(unsigned long start,
- unsigned long extent_per_way)
-{
- unsigned long orig_sr, sr_with_bl;
- unsigned long base_addr;
- unsigned long way_incr, linesz, way_size;
- struct cache_info *dcache;
- register unsigned long a0, a1, a2, a3, a0e;
-
- asm volatile("stc sr, %0" : "=r" (orig_sr));
- sr_with_bl = orig_sr | (1<<28);
- base_addr = ((unsigned long)&empty_zero_page[0]);
-
- /* See comment under 1-way above */
- base_addr = ((base_addr >> 16) << 16);
- base_addr |= start;
-
- dcache = &boot_cpu_data.dcache;
- linesz = dcache->linesz;
- way_incr = dcache->way_incr;
- way_size = dcache->way_size;
-
- a0 = base_addr;
- a1 = a0 + way_incr;
- a2 = a1 + way_incr;
- a3 = a2 + way_incr;
- a0e = base_addr + extent_per_way;
- do {
- asm volatile("ldc %0, sr" : : "r" (sr_with_bl));
- asm volatile("movca.l r0, @%0\n\t"
- "movca.l r0, @%1\n\t"
- "movca.l r0, @%2\n\t"
- "movca.l r0, @%3\n\t"
- "ocbi @%0\n\t"
- "ocbi @%1\n\t"
- "ocbi @%2\n\t"
- "ocbi @%3\n\t" : :
- "r" (a0), "r" (a1), "r" (a2), "r" (a3));
- a0 += linesz;
- a1 += linesz;
- a2 += linesz;
- a3 += linesz;
- asm volatile("movca.l r0, @%0\n\t"
- "movca.l r0, @%1\n\t"
- "movca.l r0, @%2\n\t"
- "movca.l r0, @%3\n\t"
- "ocbi @%0\n\t"
- "ocbi @%1\n\t"
- "ocbi @%2\n\t"
- "ocbi @%3\n\t" : :
- "r" (a0), "r" (a1), "r" (a2), "r" (a3));
- a0 += linesz;
- a1 += linesz;
- a2 += linesz;
- a3 += linesz;
- asm volatile("movca.l r0, @%0\n\t"
- "movca.l r0, @%1\n\t"
- "movca.l r0, @%2\n\t"
- "movca.l r0, @%3\n\t"
- "ocbi @%0\n\t"
- "ocbi @%1\n\t"
- "ocbi @%2\n\t"
- "ocbi @%3\n\t" : :
- "r" (a0), "r" (a1), "r" (a2), "r" (a3));
- a0 += linesz;
- a1 += linesz;
- a2 += linesz;
- a3 += linesz;
- asm volatile("movca.l r0, @%0\n\t"
- "movca.l r0, @%1\n\t"
- "movca.l r0, @%2\n\t"
- "movca.l r0, @%3\n\t"
- "ocbi @%0\n\t"
- "ocbi @%1\n\t"
- "ocbi @%2\n\t"
- "ocbi @%3\n\t" : :
- "r" (a0), "r" (a1), "r" (a2), "r" (a3));
- asm volatile("ldc %0, sr" : : "r" (orig_sr));
- a0 += linesz;
- a1 += linesz;
- a2 += linesz;
- a3 += linesz;
- } while (a0 < a0e);
-}
-
extern void __weak sh4__flush_region_init(void);
/*
@@ -710,32 +384,11 @@
*/
void __init sh4_cache_init(void)
{
- unsigned int wt_enabled = !!(__raw_readl(CCR) & CCR_CACHE_WT);
-
printk("PVR=%08x CVR=%08x PRR=%08x\n",
ctrl_inl(CCN_PVR),
ctrl_inl(CCN_CVR),
ctrl_inl(CCN_PRR));
- if (wt_enabled)
- __flush_dcache_segment_fn = __flush_dcache_segment_writethrough;
- else {
- switch (boot_cpu_data.dcache.ways) {
- case 1:
- __flush_dcache_segment_fn = __flush_dcache_segment_1way;
- break;
- case 2:
- __flush_dcache_segment_fn = __flush_dcache_segment_2way;
- break;
- case 4:
- __flush_dcache_segment_fn = __flush_dcache_segment_4way;
- break;
- default:
- panic("unknown number of cache ways\n");
- break;
- }
- }
-
local_flush_icache_range = sh4_flush_icache_range;
local_flush_dcache_page = sh4_flush_dcache_page;
local_flush_cache_all = sh4_flush_cache_all;
diff --git a/arch/sh/mm/cache-sh5.c b/arch/sh/mm/cache-sh5.c
index 467ff8e..eb4cc4e 100644
--- a/arch/sh/mm/cache-sh5.c
+++ b/arch/sh/mm/cache-sh5.c
@@ -563,7 +563,7 @@
static void sh5_flush_dcache_page(void *page)
{
- sh64_dcache_purge_phy_page(page_to_phys(page));
+ sh64_dcache_purge_phy_page(page_to_phys((struct page *)page));
wmb();
}
diff --git a/arch/sh/mm/cache-sh7705.c b/arch/sh/mm/cache-sh7705.c
index 2601935..f527fb7 100644
--- a/arch/sh/mm/cache-sh7705.c
+++ b/arch/sh/mm/cache-sh7705.c
@@ -141,7 +141,7 @@
if (mapping && !mapping_mapped(mapping))
set_bit(PG_dcache_dirty, &page->flags);
else
- __flush_dcache_page(PHYSADDR(page_address(page)));
+ __flush_dcache_page(__pa(page_address(page)));
}
static void __uses_jump_to_uncached sh7705_flush_cache_all(void *args)
diff --git a/arch/sh/mm/cache.c b/arch/sh/mm/cache.c
index a2dc7f9..e9415d3 100644
--- a/arch/sh/mm/cache.c
+++ b/arch/sh/mm/cache.c
@@ -27,8 +27,11 @@
void (*local_flush_cache_sigtramp)(void *args) = cache_noop;
void (*__flush_wback_region)(void *start, int size);
+EXPORT_SYMBOL(__flush_wback_region);
void (*__flush_purge_region)(void *start, int size);
+EXPORT_SYMBOL(__flush_purge_region);
void (*__flush_invalidate_region)(void *start, int size);
+EXPORT_SYMBOL(__flush_invalidate_region);
static inline void noop__flush_region(void *start, int size)
{
@@ -161,14 +164,21 @@
{
cacheop_on_each_cpu(local_flush_cache_all, NULL, 1);
}
+EXPORT_SYMBOL(flush_cache_all);
void flush_cache_mm(struct mm_struct *mm)
{
+ if (boot_cpu_data.dcache.n_aliases == 0)
+ return;
+
cacheop_on_each_cpu(local_flush_cache_mm, mm, 1);
}
void flush_cache_dup_mm(struct mm_struct *mm)
{
+ if (boot_cpu_data.dcache.n_aliases == 0)
+ return;
+
cacheop_on_each_cpu(local_flush_cache_dup_mm, mm, 1);
}
@@ -195,11 +205,13 @@
cacheop_on_each_cpu(local_flush_cache_range, (void *)&data, 1);
}
+EXPORT_SYMBOL(flush_cache_range);
void flush_dcache_page(struct page *page)
{
cacheop_on_each_cpu(local_flush_dcache_page, page, 1);
}
+EXPORT_SYMBOL(flush_dcache_page);
void flush_icache_range(unsigned long start, unsigned long end)
{
@@ -265,7 +277,11 @@
void __init cpu_cache_init(void)
{
- unsigned int cache_disabled = !(__raw_readl(CCR) & CCR_CACHE_ENABLE);
+ unsigned int cache_disabled = 0;
+
+#ifdef CCR
+ cache_disabled = !(__raw_readl(CCR) & CCR_CACHE_ENABLE);
+#endif
compute_alias(&boot_cpu_data.icache);
compute_alias(&boot_cpu_data.dcache);
diff --git a/arch/sh/mm/consistent.c b/arch/sh/mm/consistent.c
index e098ec1..902967e 100644
--- a/arch/sh/mm/consistent.c
+++ b/arch/sh/mm/consistent.c
@@ -15,11 +15,15 @@
#include <linux/dma-mapping.h>
#include <linux/dma-debug.h>
#include <linux/io.h>
+#include <linux/module.h>
#include <asm/cacheflush.h>
#include <asm/addrspace.h>
#define PREALLOC_DMA_DEBUG_ENTRIES 4096
+struct dma_map_ops *dma_ops;
+EXPORT_SYMBOL(dma_ops);
+
static int __init dma_init(void)
{
dma_debug_init(PREALLOC_DMA_DEBUG_ENTRIES);
@@ -27,15 +31,12 @@
}
fs_initcall(dma_init);
-void *dma_alloc_coherent(struct device *dev, size_t size,
- dma_addr_t *dma_handle, gfp_t gfp)
+void *dma_generic_alloc_coherent(struct device *dev, size_t size,
+ dma_addr_t *dma_handle, gfp_t gfp)
{
void *ret, *ret_nocache;
int order = get_order(size);
- if (dma_alloc_from_coherent(dev, size, dma_handle, &ret))
- return ret;
-
ret = (void *)__get_free_pages(gfp, order);
if (!ret)
return NULL;
@@ -57,35 +58,26 @@
*dma_handle = virt_to_phys(ret);
- debug_dma_alloc_coherent(dev, size, *dma_handle, ret_nocache);
-
return ret_nocache;
}
-EXPORT_SYMBOL(dma_alloc_coherent);
-void dma_free_coherent(struct device *dev, size_t size,
- void *vaddr, dma_addr_t dma_handle)
+void dma_generic_free_coherent(struct device *dev, size_t size,
+ void *vaddr, dma_addr_t dma_handle)
{
int order = get_order(size);
unsigned long pfn = dma_handle >> PAGE_SHIFT;
int k;
- WARN_ON(irqs_disabled()); /* for portability */
-
- if (dma_release_from_coherent(dev, order, vaddr))
- return;
-
- debug_dma_free_coherent(dev, size, vaddr, dma_handle);
for (k = 0; k < (1 << order); k++)
__free_pages(pfn_to_page(pfn + k), 0);
+
iounmap(vaddr);
}
-EXPORT_SYMBOL(dma_free_coherent);
void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
enum dma_data_direction direction)
{
-#ifdef CONFIG_CPU_SH5
+#if defined(CONFIG_CPU_SH5) || defined(CONFIG_PMB)
void *p1addr = vaddr;
#else
void *p1addr = (void*) P1SEGADDR((unsigned long)vaddr);
diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c
index 8173e38..432acd0 100644
--- a/arch/sh/mm/init.c
+++ b/arch/sh/mm/init.c
@@ -15,6 +15,7 @@
#include <linux/pagemap.h>
#include <linux/percpu.h>
#include <linux/io.h>
+#include <linux/dma-mapping.h>
#include <asm/mmu_context.h>
#include <asm/tlb.h>
#include <asm/cacheflush.h>
@@ -186,11 +187,21 @@
set_fixmap_nocache(FIX_UNCACHED, __pa(&__uncached_start));
}
+/*
+ * Early initialization for any I/O MMUs we might have.
+ */
+static void __init iommu_init(void)
+{
+ no_iommu_init();
+}
+
void __init mem_init(void)
{
int codesize, datasize, initsize;
int nid;
+ iommu_init();
+
num_physpages = 0;
high_memory = NULL;
@@ -323,4 +334,12 @@
}
EXPORT_SYMBOL_GPL(memory_add_physaddr_to_nid);
#endif
+
#endif /* CONFIG_MEMORY_HOTPLUG */
+
+#ifdef CONFIG_PMB
+int __in_29bit_mode(void)
+{
+ return !(ctrl_inl(PMB_PASCR) & PASCR_SE);
+}
+#endif /* CONFIG_PMB */
diff --git a/arch/sh/mm/kmap.c b/arch/sh/mm/kmap.c
index 16e01b5..15d74ea 100644
--- a/arch/sh/mm/kmap.c
+++ b/arch/sh/mm/kmap.c
@@ -39,7 +39,9 @@
pagefault_disable();
idx = FIX_CMAP_END -
- ((addr & current_cpu_data.dcache.alias_mask) >> PAGE_SHIFT);
+ (((addr >> PAGE_SHIFT) & (FIX_N_COLOURS - 1)) +
+ (FIX_N_COLOURS * smp_processor_id()));
+
vaddr = __fix_to_virt(idx);
BUG_ON(!pte_none(*(kmap_coherent_pte - idx)));
diff --git a/arch/sh/mm/numa.c b/arch/sh/mm/numa.c
index 9b784fd..6c52444 100644
--- a/arch/sh/mm/numa.c
+++ b/arch/sh/mm/numa.c
@@ -60,7 +60,7 @@
unsigned long bootmem_paddr;
/* Don't allow bogus node assignment */
- BUG_ON(nid > MAX_NUMNODES || nid == 0);
+ BUG_ON(nid > MAX_NUMNODES || nid <= 0);
start_pfn = start >> PAGE_SHIFT;
end_pfn = end >> PAGE_SHIFT;
diff --git a/arch/sh/mm/pmb-fixed.c b/arch/sh/mm/pmb-fixed.c
deleted file mode 100644
index 43c8eac..0000000
--- a/arch/sh/mm/pmb-fixed.c
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * arch/sh/mm/fixed_pmb.c
- *
- * Copyright (C) 2009 Renesas Solutions Corp.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/io.h>
-#include <asm/mmu.h>
-#include <asm/mmu_context.h>
-
-static int __uses_jump_to_uncached fixed_pmb_init(void)
-{
- int i;
- unsigned long addr, data;
-
- jump_to_uncached();
-
- for (i = 0; i < PMB_ENTRY_MAX; i++) {
- addr = PMB_DATA + (i << PMB_E_SHIFT);
- data = ctrl_inl(addr);
- if (!(data & PMB_V))
- continue;
-
- if (data & PMB_C) {
-#if defined(CONFIG_CACHE_WRITETHROUGH)
- data |= PMB_WT;
-#elif defined(CONFIG_CACHE_WRITEBACK)
- data &= ~PMB_WT;
-#else
- data &= ~(PMB_C | PMB_WT);
-#endif
- }
- ctrl_outl(data, addr);
- }
-
- back_to_cached();
-
- return 0;
-}
-arch_initcall(fixed_pmb_init);
diff --git a/arch/sh/mm/pmb.c b/arch/sh/mm/pmb.c
index aade311..280f6a1 100644
--- a/arch/sh/mm/pmb.c
+++ b/arch/sh/mm/pmb.c
@@ -35,29 +35,9 @@
static void __pmb_unmap(struct pmb_entry *);
-static struct kmem_cache *pmb_cache;
+static struct pmb_entry pmb_entry_list[NR_PMB_ENTRIES];
static unsigned long pmb_map;
-static struct pmb_entry pmb_init_map[] = {
- /* vpn ppn flags (ub/sz/c/wt) */
-
- /* P1 Section Mappings */
- { 0x80000000, 0x00000000, PMB_SZ_64M | PMB_C, },
- { 0x84000000, 0x04000000, PMB_SZ_64M | PMB_C, },
- { 0x88000000, 0x08000000, PMB_SZ_128M | PMB_C, },
- { 0x90000000, 0x10000000, PMB_SZ_64M | PMB_C, },
- { 0x94000000, 0x14000000, PMB_SZ_64M | PMB_C, },
- { 0x98000000, 0x18000000, PMB_SZ_64M | PMB_C, },
-
- /* P2 Section Mappings */
- { 0xa0000000, 0x00000000, PMB_UB | PMB_SZ_64M | PMB_WT, },
- { 0xa4000000, 0x04000000, PMB_UB | PMB_SZ_64M | PMB_WT, },
- { 0xa8000000, 0x08000000, PMB_UB | PMB_SZ_128M | PMB_WT, },
- { 0xb0000000, 0x10000000, PMB_UB | PMB_SZ_64M | PMB_WT, },
- { 0xb4000000, 0x14000000, PMB_UB | PMB_SZ_64M | PMB_WT, },
- { 0xb8000000, 0x18000000, PMB_UB | PMB_SZ_64M | PMB_WT, },
-};
-
static inline unsigned long mk_pmb_entry(unsigned int entry)
{
return (entry & PMB_E_MASK) << PMB_E_SHIFT;
@@ -73,81 +53,68 @@
return mk_pmb_entry(entry) | PMB_DATA;
}
-static DEFINE_SPINLOCK(pmb_list_lock);
-static struct pmb_entry *pmb_list;
-
-static inline void pmb_list_add(struct pmb_entry *pmbe)
+static int pmb_alloc_entry(void)
{
- struct pmb_entry **p, *tmp;
+ unsigned int pos;
- p = &pmb_list;
- while ((tmp = *p) != NULL)
- p = &tmp->next;
+repeat:
+ pos = find_first_zero_bit(&pmb_map, NR_PMB_ENTRIES);
- pmbe->next = tmp;
- *p = pmbe;
+ if (unlikely(pos > NR_PMB_ENTRIES))
+ return -ENOSPC;
+
+ if (test_and_set_bit(pos, &pmb_map))
+ goto repeat;
+
+ return pos;
}
-static inline void pmb_list_del(struct pmb_entry *pmbe)
-{
- struct pmb_entry **p, *tmp;
-
- for (p = &pmb_list; (tmp = *p); p = &tmp->next)
- if (tmp == pmbe) {
- *p = tmp->next;
- return;
- }
-}
-
-struct pmb_entry *pmb_alloc(unsigned long vpn, unsigned long ppn,
- unsigned long flags)
+static struct pmb_entry *pmb_alloc(unsigned long vpn, unsigned long ppn,
+ unsigned long flags, int entry)
{
struct pmb_entry *pmbe;
+ int pos;
- pmbe = kmem_cache_alloc(pmb_cache, GFP_KERNEL);
+ if (entry == PMB_NO_ENTRY) {
+ pos = pmb_alloc_entry();
+ if (pos < 0)
+ return ERR_PTR(pos);
+ } else {
+ if (test_bit(entry, &pmb_map))
+ return ERR_PTR(-ENOSPC);
+ pos = entry;
+ }
+
+ pmbe = &pmb_entry_list[pos];
if (!pmbe)
return ERR_PTR(-ENOMEM);
pmbe->vpn = vpn;
pmbe->ppn = ppn;
pmbe->flags = flags;
-
- spin_lock_irq(&pmb_list_lock);
- pmb_list_add(pmbe);
- spin_unlock_irq(&pmb_list_lock);
+ pmbe->entry = pos;
return pmbe;
}
-void pmb_free(struct pmb_entry *pmbe)
+static void pmb_free(struct pmb_entry *pmbe)
{
- spin_lock_irq(&pmb_list_lock);
- pmb_list_del(pmbe);
- spin_unlock_irq(&pmb_list_lock);
+ int pos = pmbe->entry;
- kmem_cache_free(pmb_cache, pmbe);
+ pmbe->vpn = 0;
+ pmbe->ppn = 0;
+ pmbe->flags = 0;
+ pmbe->entry = 0;
+
+ clear_bit(pos, &pmb_map);
}
/*
* Must be in P2 for __set_pmb_entry()
*/
-int __set_pmb_entry(unsigned long vpn, unsigned long ppn,
- unsigned long flags, int *entry)
+static void __set_pmb_entry(unsigned long vpn, unsigned long ppn,
+ unsigned long flags, int pos)
{
- unsigned int pos = *entry;
-
- if (unlikely(pos == PMB_NO_ENTRY))
- pos = find_first_zero_bit(&pmb_map, NR_PMB_ENTRIES);
-
-repeat:
- if (unlikely(pos > NR_PMB_ENTRIES))
- return -ENOSPC;
-
- if (test_and_set_bit(pos, &pmb_map)) {
- pos = find_first_zero_bit(&pmb_map, NR_PMB_ENTRIES);
- goto repeat;
- }
-
ctrl_outl(vpn | PMB_V, mk_pmb_addr(pos));
#ifdef CONFIG_CACHE_WRITETHROUGH
@@ -161,35 +128,21 @@
#endif
ctrl_outl(ppn | flags | PMB_V, mk_pmb_data(pos));
-
- *entry = pos;
-
- return 0;
}
-int __uses_jump_to_uncached set_pmb_entry(struct pmb_entry *pmbe)
+static void __uses_jump_to_uncached set_pmb_entry(struct pmb_entry *pmbe)
{
- int ret;
-
jump_to_uncached();
- ret = __set_pmb_entry(pmbe->vpn, pmbe->ppn, pmbe->flags, &pmbe->entry);
+ __set_pmb_entry(pmbe->vpn, pmbe->ppn, pmbe->flags, pmbe->entry);
back_to_cached();
-
- return ret;
}
-void __uses_jump_to_uncached clear_pmb_entry(struct pmb_entry *pmbe)
+static void __uses_jump_to_uncached clear_pmb_entry(struct pmb_entry *pmbe)
{
unsigned int entry = pmbe->entry;
unsigned long addr;
- /*
- * Don't allow clearing of wired init entries, P1 or P2 access
- * without a corresponding mapping in the PMB will lead to reset
- * by the TLB.
- */
- if (unlikely(entry < ARRAY_SIZE(pmb_init_map) ||
- entry >= NR_PMB_ENTRIES))
+ if (unlikely(entry >= NR_PMB_ENTRIES))
return;
jump_to_uncached();
@@ -202,8 +155,6 @@
ctrl_outl(ctrl_inl(addr) & ~PMB_V, addr);
back_to_cached();
-
- clear_bit(entry, &pmb_map);
}
@@ -239,23 +190,17 @@
again:
for (i = 0; i < ARRAY_SIZE(pmb_sizes); i++) {
- int ret;
-
if (size < pmb_sizes[i].size)
continue;
- pmbe = pmb_alloc(vaddr, phys, pmb_flags | pmb_sizes[i].flag);
+ pmbe = pmb_alloc(vaddr, phys, pmb_flags | pmb_sizes[i].flag,
+ PMB_NO_ENTRY);
if (IS_ERR(pmbe)) {
err = PTR_ERR(pmbe);
goto out;
}
- ret = set_pmb_entry(pmbe);
- if (ret != 0) {
- pmb_free(pmbe);
- err = -EBUSY;
- goto out;
- }
+ set_pmb_entry(pmbe);
phys += pmb_sizes[i].size;
vaddr += pmb_sizes[i].size;
@@ -292,11 +237,16 @@
void pmb_unmap(unsigned long addr)
{
- struct pmb_entry **p, *pmbe;
+ struct pmb_entry *pmbe = NULL;
+ int i;
- for (p = &pmb_list; (pmbe = *p); p = &pmbe->next)
- if (pmbe->vpn == addr)
- break;
+ for (i = 0; i < ARRAY_SIZE(pmb_entry_list); i++) {
+ if (test_bit(i, &pmb_map)) {
+ pmbe = &pmb_entry_list[i];
+ if (pmbe->vpn == addr)
+ break;
+ }
+ }
if (unlikely(!pmbe))
return;
@@ -306,13 +256,22 @@
static void __pmb_unmap(struct pmb_entry *pmbe)
{
- WARN_ON(!test_bit(pmbe->entry, &pmb_map));
+ BUG_ON(!test_bit(pmbe->entry, &pmb_map));
do {
struct pmb_entry *pmblink = pmbe;
- if (pmbe->entry != PMB_NO_ENTRY)
- clear_pmb_entry(pmbe);
+ /*
+ * We may be called before this pmb_entry has been
+ * entered into the PMB table via set_pmb_entry(), but
+ * that's OK because we've allocated a unique slot for
+ * this entry in pmb_alloc() (even if we haven't filled
+ * it yet).
+ *
+ * Therefore, calling clear_pmb_entry() is safe as no
+ * other mapping can be using that slot.
+ */
+ clear_pmb_entry(pmbe);
pmbe = pmblink->link;
@@ -320,42 +279,34 @@
} while (pmbe);
}
-static void pmb_cache_ctor(void *pmb)
+#ifdef CONFIG_PMB
+int __uses_jump_to_uncached pmb_init(void)
{
- struct pmb_entry *pmbe = pmb;
-
- memset(pmb, 0, sizeof(struct pmb_entry));
-
- pmbe->entry = PMB_NO_ENTRY;
-}
-
-static int __uses_jump_to_uncached pmb_init(void)
-{
- unsigned int nr_entries = ARRAY_SIZE(pmb_init_map);
- unsigned int entry, i;
-
- BUG_ON(unlikely(nr_entries >= NR_PMB_ENTRIES));
-
- pmb_cache = kmem_cache_create("pmb", sizeof(struct pmb_entry), 0,
- SLAB_PANIC, pmb_cache_ctor);
+ unsigned int i;
+ long size, ret;
jump_to_uncached();
/*
- * Ordering is important, P2 must be mapped in the PMB before we
- * can set PMB.SE, and P1 must be mapped before we jump back to
- * P1 space.
+ * Insert PMB entries for the P1 and P2 areas so that, after
+ * we've switched the MMU to 32-bit mode, the semantics of P1
+ * and P2 are the same as in 29-bit mode, e.g.
+ *
+ * P1 - provides a cached window onto physical memory
+ * P2 - provides an uncached window onto physical memory
*/
- for (entry = 0; entry < nr_entries; entry++) {
- struct pmb_entry *pmbe = pmb_init_map + entry;
+ size = __MEMORY_START + __MEMORY_SIZE;
- __set_pmb_entry(pmbe->vpn, pmbe->ppn, pmbe->flags, &entry);
- }
+ ret = pmb_remap(P1SEG, 0x00000000, size, PMB_C);
+ BUG_ON(ret != size);
+
+ ret = pmb_remap(P2SEG, 0x00000000, size, PMB_WT | PMB_UB);
+ BUG_ON(ret != size);
ctrl_outl(0, PMB_IRMCR);
/* PMB.SE and UB[7] */
- ctrl_outl((1 << 31) | (1 << 7), PMB_PASCR);
+ ctrl_outl(PASCR_SE | (1 << 7), PMB_PASCR);
/* Flush out the TLB */
i = ctrl_inl(MMUCR);
@@ -366,7 +317,53 @@
return 0;
}
-arch_initcall(pmb_init);
+#else
+int __uses_jump_to_uncached pmb_init(void)
+{
+ int i;
+ unsigned long addr, data;
+
+ jump_to_uncached();
+
+ for (i = 0; i < PMB_ENTRY_MAX; i++) {
+ struct pmb_entry *pmbe;
+ unsigned long vpn, ppn, flags;
+
+ addr = PMB_DATA + (i << PMB_E_SHIFT);
+ data = ctrl_inl(addr);
+ if (!(data & PMB_V))
+ continue;
+
+ if (data & PMB_C) {
+#if defined(CONFIG_CACHE_WRITETHROUGH)
+ data |= PMB_WT;
+#elif defined(CONFIG_CACHE_WRITEBACK)
+ data &= ~PMB_WT;
+#else
+ data &= ~(PMB_C | PMB_WT);
+#endif
+ }
+ ctrl_outl(data, addr);
+
+ ppn = data & PMB_PFN_MASK;
+
+ flags = data & (PMB_C | PMB_WT | PMB_UB);
+ flags |= data & PMB_SZ_MASK;
+
+ addr = PMB_ADDR + (i << PMB_E_SHIFT);
+ data = ctrl_inl(addr);
+
+ vpn = data & PMB_PFN_MASK;
+
+ pmbe = pmb_alloc(vpn, ppn, flags, i);
+ WARN_ON(IS_ERR(pmbe));
+ }
+
+ back_to_cached();
+
+ return 0;
+}
+#endif /* CONFIG_PMB */
static int pmb_seq_show(struct seq_file *file, void *iter)
{
@@ -434,15 +431,18 @@
static int pmb_sysdev_suspend(struct sys_device *dev, pm_message_t state)
{
static pm_message_t prev_state;
+ int i;
/* Restore the PMB after a resume from hibernation */
if (state.event == PM_EVENT_ON &&
prev_state.event == PM_EVENT_FREEZE) {
struct pmb_entry *pmbe;
- spin_lock_irq(&pmb_list_lock);
- for (pmbe = pmb_list; pmbe; pmbe = pmbe->next)
- set_pmb_entry(pmbe);
- spin_unlock_irq(&pmb_list_lock);
+ for (i = 0; i < ARRAY_SIZE(pmb_entry_list); i++) {
+ if (test_bit(i, &pmb_map)) {
+ pmbe = &pmb_entry_list[i];
+ set_pmb_entry(pmbe);
+ }
+ }
}
prev_state = state;
return 0;
diff --git a/arch/sh/oprofile/Makefile b/arch/sh/oprofile/Makefile
index 8e6eec9..4886c5c 100644
--- a/arch/sh/oprofile/Makefile
+++ b/arch/sh/oprofile/Makefile
@@ -7,7 +7,3 @@
timer_int.o )
oprofile-y := $(DRIVER_OBJS) common.o backtrace.o
-
-oprofile-$(CONFIG_CPU_SUBTYPE_SH7750S) += op_model_sh7750.o
-oprofile-$(CONFIG_CPU_SUBTYPE_SH7750) += op_model_sh7750.o
-oprofile-$(CONFIG_CPU_SUBTYPE_SH7091) += op_model_sh7750.o
diff --git a/arch/sh/oprofile/common.c b/arch/sh/oprofile/common.c
index 44f4e31..ac60493 100644
--- a/arch/sh/oprofile/common.c
+++ b/arch/sh/oprofile/common.c
@@ -20,9 +20,6 @@
#include <asm/processor.h>
#include "op_impl.h"
-extern struct op_sh_model op_model_sh7750_ops __weak;
-extern struct op_sh_model op_model_sh4a_ops __weak;
-
static struct op_sh_model *model;
static struct op_counter_config ctr[20];
@@ -94,33 +91,14 @@
*/
ops->backtrace = sh_backtrace;
- switch (current_cpu_data.type) {
- /* SH-4 types */
- case CPU_SH7750:
- case CPU_SH7750S:
- lmodel = &op_model_sh7750_ops;
- break;
-
- /* SH-4A types */
- case CPU_SH7763:
- case CPU_SH7770:
- case CPU_SH7780:
- case CPU_SH7781:
- case CPU_SH7785:
- case CPU_SH7786:
- case CPU_SH7723:
- case CPU_SH7724:
- case CPU_SHX3:
- lmodel = &op_model_sh4a_ops;
- break;
-
- /* SH4AL-DSP types */
- case CPU_SH7343:
- case CPU_SH7722:
- case CPU_SH7366:
- lmodel = &op_model_sh4a_ops;
- break;
- }
+ /*
+ * XXX
+ *
+ * All of the SH7750/SH-4A counters have been converted to perf,
+ * this infrastructure hook is left for other users until they've
+ * had a chance to convert over, at which point all of this
+ * will be deleted.
+ */
if (!lmodel)
return -ENODEV;
diff --git a/arch/sh/oprofile/op_impl.h b/arch/sh/oprofile/op_impl.h
index 4d50997..1244479 100644
--- a/arch/sh/oprofile/op_impl.h
+++ b/arch/sh/oprofile/op_impl.h
@@ -6,7 +6,7 @@
unsigned long enabled;
unsigned long event;
- unsigned long long count;
+ unsigned long count;
/* Dummy values for userspace tool compliance */
unsigned long kernel;
diff --git a/arch/sh/oprofile/op_model_sh7750.c b/arch/sh/oprofile/op_model_sh7750.c
deleted file mode 100644
index c892c7c..0000000
--- a/arch/sh/oprofile/op_model_sh7750.c
+++ /dev/null
@@ -1,255 +0,0 @@
-/*
- * arch/sh/oprofile/op_model_sh7750.c
- *
- * OProfile support for SH7750/SH7750S Performance Counters
- *
- * Copyright (C) 2003 - 2008 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/kernel.h>
-#include <linux/oprofile.h>
-#include <linux/profile.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/fs.h>
-#include "op_impl.h"
-
-#define PM_CR_BASE 0xff000084 /* 16-bit */
-#define PM_CTR_BASE 0xff100004 /* 32-bit */
-
-#define PMCR(n) (PM_CR_BASE + ((n) * 0x04))
-#define PMCTRH(n) (PM_CTR_BASE + 0x00 + ((n) * 0x08))
-#define PMCTRL(n) (PM_CTR_BASE + 0x04 + ((n) * 0x08))
-
-#define PMCR_PMM_MASK 0x0000003f
-
-#define PMCR_CLKF 0x00000100
-#define PMCR_PMCLR 0x00002000
-#define PMCR_PMST 0x00004000
-#define PMCR_PMEN 0x00008000
-
-struct op_sh_model op_model_sh7750_ops;
-
-#define NR_CNTRS 2
-
-static struct sh7750_ppc_register_config {
- unsigned int ctrl;
- unsigned long cnt_hi;
- unsigned long cnt_lo;
-} regcache[NR_CNTRS];
-
-/*
- * There are a number of events supported by each counter (33 in total).
- * Since we have 2 counters, each counter will take the event code as it
- * corresponds to the PMCR PMM setting. Each counter can be configured
- * independently.
- *
- * Event Code Description
- * ---------- -----------
- *
- * 0x01 Operand read access
- * 0x02 Operand write access
- * 0x03 UTLB miss
- * 0x04 Operand cache read miss
- * 0x05 Operand cache write miss
- * 0x06 Instruction fetch (w/ cache)
- * 0x07 Instruction TLB miss
- * 0x08 Instruction cache miss
- * 0x09 All operand accesses
- * 0x0a All instruction accesses
- * 0x0b OC RAM operand access
- * 0x0d On-chip I/O space access
- * 0x0e Operand access (r/w)
- * 0x0f Operand cache miss (r/w)
- * 0x10 Branch instruction
- * 0x11 Branch taken
- * 0x12 BSR/BSRF/JSR
- * 0x13 Instruction execution
- * 0x14 Instruction execution in parallel
- * 0x15 FPU Instruction execution
- * 0x16 Interrupt
- * 0x17 NMI
- * 0x18 trapa instruction execution
- * 0x19 UBCA match
- * 0x1a UBCB match
- * 0x21 Instruction cache fill
- * 0x22 Operand cache fill
- * 0x23 Elapsed time
- * 0x24 Pipeline freeze by I-cache miss
- * 0x25 Pipeline freeze by D-cache miss
- * 0x27 Pipeline freeze by branch instruction
- * 0x28 Pipeline freeze by CPU register
- * 0x29 Pipeline freeze by FPU
- *
- * Unfortunately we don't have a native exception or interrupt for counter
- * overflow (although since these counters can run for 16.3 days without
- * overflowing, it's not really necessary).
- *
- * OProfile on the other hand likes to have samples taken periodically, so
- * for now we just piggyback the timer interrupt to get the expected
- * behavior.
- */
-
-static int sh7750_timer_notify(struct pt_regs *regs)
-{
- oprofile_add_sample(regs, 0);
- return 0;
-}
-
-static u64 sh7750_read_counter(int counter)
-{
- return (u64)((u64)(__raw_readl(PMCTRH(counter)) & 0xffff) << 32) |
- __raw_readl(PMCTRL(counter));
-}
-
-/*
- * Files will be in a path like:
- *
- * /<oprofilefs mount point>/<counter number>/<file>
- *
- * So when dealing with <file>, we look to the parent dentry for the counter
- * number.
- */
-static inline int to_counter(struct file *file)
-{
- const unsigned char *name = file->f_path.dentry->d_parent->d_name.name;
-
- return (int)simple_strtol(name, NULL, 10);
-}
-
-/*
- * XXX: We have 48-bit counters, so we're probably going to want something
- * more along the lines of oprofilefs_ullong_to_user().. Truncating to
- * unsigned long works fine for now though, as long as we don't attempt to
- * profile for too horribly long.
- */
-static ssize_t sh7750_read_count(struct file *file, char __user *buf,
- size_t count, loff_t *ppos)
-{
- int counter = to_counter(file);
- u64 val = sh7750_read_counter(counter);
-
- return oprofilefs_ulong_to_user((unsigned long)val, buf, count, ppos);
-}
-
-static ssize_t sh7750_write_count(struct file *file, const char __user *buf,
- size_t count, loff_t *ppos)
-{
- int counter = to_counter(file);
- unsigned long val;
-
- if (oprofilefs_ulong_from_user(&val, buf, count))
- return -EFAULT;
-
- /*
- * Any write will clear the counter, although only 0 should be
- * written for this purpose, as we do not support setting the
- * counter to an arbitrary value.
- */
- WARN_ON(val != 0);
-
- __raw_writew(__raw_readw(PMCR(counter)) | PMCR_PMCLR, PMCR(counter));
-
- return count;
-}
-
-static const struct file_operations count_fops = {
- .read = sh7750_read_count,
- .write = sh7750_write_count,
-};
-
-static int sh7750_ppc_create_files(struct super_block *sb, struct dentry *dir)
-{
- return oprofilefs_create_file(sb, dir, "count", &count_fops);
-}
-
-static void sh7750_ppc_reg_setup(struct op_counter_config *ctr)
-{
- unsigned int counters = op_model_sh7750_ops.num_counters;
- int i;
-
- for (i = 0; i < counters; i++) {
- regcache[i].ctrl = 0;
- regcache[i].cnt_hi = 0;
- regcache[i].cnt_lo = 0;
-
- if (!ctr[i].enabled)
- continue;
-
- regcache[i].ctrl |= ctr[i].event | PMCR_PMEN | PMCR_PMST;
- regcache[i].cnt_hi = (unsigned long)((ctr->count >> 32) & 0xffff);
- regcache[i].cnt_lo = (unsigned long)(ctr->count & 0xffffffff);
- }
-}
-
-static void sh7750_ppc_cpu_setup(void *args)
-{
- unsigned int counters = op_model_sh7750_ops.num_counters;
- int i;
-
- for (i = 0; i < counters; i++) {
- __raw_writew(0, PMCR(i));
- __raw_writel(regcache[i].cnt_hi, PMCTRH(i));
- __raw_writel(regcache[i].cnt_lo, PMCTRL(i));
- }
-}
-
-static void sh7750_ppc_cpu_start(void *args)
-{
- unsigned int counters = op_model_sh7750_ops.num_counters;
- int i;
-
- for (i = 0; i < counters; i++)
- __raw_writew(regcache[i].ctrl, PMCR(i));
-}
-
-static void sh7750_ppc_cpu_stop(void *args)
-{
- unsigned int counters = op_model_sh7750_ops.num_counters;
- int i;
-
- /* Disable the counters */
- for (i = 0; i < counters; i++)
- __raw_writew(__raw_readw(PMCR(i)) & ~PMCR_PMEN, PMCR(i));
-}
-
-static inline void sh7750_ppc_reset(void)
-{
- unsigned int counters = op_model_sh7750_ops.num_counters;
- int i;
-
- /* Clear the counters */
- for (i = 0; i < counters; i++)
- __raw_writew(__raw_readw(PMCR(i)) | PMCR_PMCLR, PMCR(i));
-}
-
-static int sh7750_ppc_init(void)
-{
- sh7750_ppc_reset();
-
- return register_timer_hook(sh7750_timer_notify);
-}
-
-static void sh7750_ppc_exit(void)
-{
- unregister_timer_hook(sh7750_timer_notify);
-
- sh7750_ppc_reset();
-}
-
-struct op_sh_model op_model_sh7750_ops = {
- .cpu_type = "sh/sh7750",
- .num_counters = NR_CNTRS,
- .reg_setup = sh7750_ppc_reg_setup,
- .cpu_setup = sh7750_ppc_cpu_setup,
- .cpu_start = sh7750_ppc_cpu_start,
- .cpu_stop = sh7750_ppc_cpu_stop,
- .init = sh7750_ppc_init,
- .exit = sh7750_ppc_exit,
- .create_files = sh7750_ppc_create_files,
-};
diff --git a/arch/um/drivers/mmapper_kern.c b/arch/um/drivers/mmapper_kern.c
index eb24032..d22f9e5 100644
--- a/arch/um/drivers/mmapper_kern.c
+++ b/arch/um/drivers/mmapper_kern.c
@@ -16,7 +16,7 @@
#include <linux/miscdevice.h>
#include <linux/module.h>
#include <linux/mm.h>
-#include <linux/smp_lock.h>
+
#include <asm/uaccess.h>
#include "mem_user.h"
@@ -78,7 +78,6 @@
static int mmapper_open(struct inode *inode, struct file *file)
{
- cycle_kernel_lock();
return 0;
}
@@ -115,18 +114,16 @@
v_buf = (char *) find_iomem("mmapper", &mmapper_size);
if (mmapper_size == 0) {
printk(KERN_ERR "mmapper_init - find_iomem failed\n");
- goto out;
+ return -ENODEV;
}
+ p_buf = __pa(v_buf);
err = misc_register(&mmapper_dev);
if (err) {
printk(KERN_ERR "mmapper - misc_register failed, err = %d\n",
err);
- goto out;
+ return err;;
}
-
- p_buf = __pa(v_buf);
-out:
return 0;
}
diff --git a/arch/um/drivers/random.c b/arch/um/drivers/random.c
index 6eabb70..4949044 100644
--- a/arch/um/drivers/random.c
+++ b/arch/um/drivers/random.c
@@ -7,7 +7,6 @@
* of the GNU General Public License, incorporated herein by reference.
*/
#include <linux/sched.h>
-#include <linux/smp_lock.h>
#include <linux/module.h>
#include <linux/fs.h>
#include <linux/interrupt.h>
@@ -34,8 +33,6 @@
static int rng_dev_open (struct inode *inode, struct file *filp)
{
- cycle_kernel_lock();
-
/* enforce read-only access to this chrdev */
if ((filp->f_mode & FMODE_READ) == 0)
return -EINVAL;
diff --git a/arch/x86/include/asm/desc_defs.h b/arch/x86/include/asm/desc_defs.h
index 9d66848..278441f 100644
--- a/arch/x86/include/asm/desc_defs.h
+++ b/arch/x86/include/asm/desc_defs.h
@@ -12,9 +12,9 @@
#include <linux/types.h>
/*
- * FIXME: Acessing the desc_struct through its fields is more elegant,
+ * FIXME: Accessing the desc_struct through its fields is more elegant,
* and should be the one valid thing to do. However, a lot of open code
- * still touches the a and b acessors, and doing this allow us to do it
+ * still touches the a and b accessors, and doing this allow us to do it
* incrementally. We keep the signature as a struct, rather than an union,
* so we can get rid of it transparently in the future -- glommer
*/
diff --git a/arch/x86/include/asm/mmzone_32.h b/arch/x86/include/asm/mmzone_32.h
index ede6998..91df7c5 100644
--- a/arch/x86/include/asm/mmzone_32.h
+++ b/arch/x86/include/asm/mmzone_32.h
@@ -47,7 +47,7 @@
/*
* generic node memory support, the following assumptions apply:
*
- * 1) memory comes in 64Mb contigious chunks which are either present or not
+ * 1) memory comes in 64Mb contiguous chunks which are either present or not
* 2) we will not have more than 64Gb in total
*
* for now assume that 64Gb is max amount of RAM for whole system
diff --git a/arch/x86/include/asm/sigcontext.h b/arch/x86/include/asm/sigcontext.h
index 72e5a44..04459d2 100644
--- a/arch/x86/include/asm/sigcontext.h
+++ b/arch/x86/include/asm/sigcontext.h
@@ -124,7 +124,7 @@
* fpstate is really (struct _fpstate *) or (struct _xstate *)
* depending on the FP_XSTATE_MAGIC1 encoded in the SW reserved
* bytes of (struct _fpstate) and FP_XSTATE_MAGIC2 present at the end
- * of extended memory layout. See comments at the defintion of
+ * of extended memory layout. See comments at the definition of
* (struct _fpx_sw_bytes)
*/
void __user *fpstate; /* zero when no FPU/extended context */
@@ -219,7 +219,7 @@
* fpstate is really (struct _fpstate *) or (struct _xstate *)
* depending on the FP_XSTATE_MAGIC1 encoded in the SW reserved
* bytes of (struct _fpstate) and FP_XSTATE_MAGIC2 present at the end
- * of extended memory layout. See comments at the defintion of
+ * of extended memory layout. See comments at the definition of
* (struct _fpx_sw_bytes)
*/
void __user *fpstate; /* zero when no FPU/extended context */
diff --git a/arch/x86/include/asm/uv/uv_bau.h b/arch/x86/include/asm/uv/uv_bau.h
index 80e2984..b414d2b 100644
--- a/arch/x86/include/asm/uv/uv_bau.h
+++ b/arch/x86/include/asm/uv/uv_bau.h
@@ -55,7 +55,7 @@
#define DESC_STATUS_SOURCE_TIMEOUT 3
/*
- * source side threshholds at which message retries print a warning
+ * source side thresholds at which message retries print a warning
*/
#define SOURCE_TIMEOUT_LIMIT 20
#define DESTINATION_TIMEOUT_LIMIT 20
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index 87eee07..fb1035c 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -1123,7 +1123,7 @@
if (!acpi_sci_override_gsi)
acpi_sci_ioapic_setup(acpi_gbl_FADT.sci_interrupt, 0, 0);
- /* Fill in identity legacy mapings where no override */
+ /* Fill in identity legacy mappings where no override */
mp_config_acpi_legacy_irqs();
count =
diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index 32fb091..1c0fb4d 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -1783,7 +1783,7 @@
goto out;
/*
- * aperture was sucessfully enlarged by 128 MB, try
+ * aperture was successfully enlarged by 128 MB, try
* allocation again
*/
goto retry;
@@ -2490,7 +2490,7 @@
struct pci_dev *dev = NULL;
u16 devid;
- /* allocate passthroug domain */
+ /* allocate passthrough domain */
pt_domain = protection_domain_alloc();
if (!pt_domain)
return -ENOMEM;
diff --git a/arch/x86/kernel/cpu/cpufreq/longhaul.c b/arch/x86/kernel/cpu/cpufreq/longhaul.c
index cabd2fa..7e7eea4 100644
--- a/arch/x86/kernel/cpu/cpufreq/longhaul.c
+++ b/arch/x86/kernel/cpu/cpufreq/longhaul.c
@@ -885,7 +885,7 @@
/* Find ACPI data for processor */
acpi_walk_namespace(ACPI_TYPE_PROCESSOR, ACPI_ROOT_OBJECT,
- ACPI_UINT32_MAX, &longhaul_walk_callback,
+ ACPI_UINT32_MAX, &longhaul_walk_callback, NULL,
NULL, (void *)&pr);
/* Check ACPI support for C3 state */
diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c
index c1bbed1..ab1a8a8 100644
--- a/arch/x86/kernel/cpu/perf_event.c
+++ b/arch/x86/kernel/cpu/perf_event.c
@@ -1286,7 +1286,7 @@
return 0;
/*
- * If we are way outside a reasoable range then just skip forward:
+ * If we are way outside a reasonable range then just skip forward:
*/
if (unlikely(left <= -period)) {
left = period;
diff --git a/arch/x86/kernel/kprobes.c b/arch/x86/kernel/kprobes.c
index 1f3186c..5b8c750 100644
--- a/arch/x86/kernel/kprobes.c
+++ b/arch/x86/kernel/kprobes.c
@@ -481,7 +481,7 @@
/*
* Interrupts are disabled on entry as trap3 is an interrupt gate and they
- * remain disabled thorough out this function.
+ * remain disabled throughout this function.
*/
static int __kprobes kprobe_handler(struct pt_regs *regs)
{
@@ -818,7 +818,7 @@
/*
* Interrupts are disabled on entry as trap1 is an interrupt gate and they
- * remain disabled thoroughout this function.
+ * remain disabled throughout this function.
*/
static int __kprobes post_kprobe_handler(struct pt_regs *regs)
{
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 324f2a4..29e6744 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -687,7 +687,7 @@
.done = COMPLETION_INITIALIZER_ONSTACK(c_idle.done),
};
- INIT_WORK(&c_idle.work, do_fork_idle);
+ INIT_WORK_ON_STACK(&c_idle.work, do_fork_idle);
alternatives_smp_switch(1);
@@ -713,6 +713,7 @@
if (IS_ERR(c_idle.idle)) {
printk("failed fork for CPU %d\n", cpu);
+ destroy_work_on_stack(&c_idle.work);
return PTR_ERR(c_idle.idle);
}
@@ -831,6 +832,7 @@
smpboot_restore_warm_reset_vector();
}
+ destroy_work_on_stack(&c_idle.work);
return boot_error;
}
diff --git a/arch/x86/mm/kmmio.c b/arch/x86/mm/kmmio.c
index 11a4ad4..07bcc30 100644
--- a/arch/x86/mm/kmmio.c
+++ b/arch/x86/mm/kmmio.c
@@ -203,7 +203,7 @@
*/
/*
* Interrupts are disabled on entry as trap3 is an interrupt gate
- * and they remain disabled thorough out this function.
+ * and they remain disabled throughout this function.
*/
int kmmio_handler(struct pt_regs *regs, unsigned long addr)
{
@@ -302,7 +302,7 @@
/*
* Interrupts are disabled on entry as trap1 is an interrupt gate
- * and they remain disabled thorough out this function.
+ * and they remain disabled throughout this function.
* This must always get called as the pair to kmmio_handler().
*/
static int post_kmmio_handler(unsigned long condition, struct pt_regs *regs)
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index c462cea..b8e45f1 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -138,24 +138,23 @@
*/
void xen_vcpu_restore(void)
{
- if (have_vcpu_info_placement) {
- int cpu;
+ int cpu;
- for_each_online_cpu(cpu) {
- bool other_cpu = (cpu != smp_processor_id());
+ for_each_online_cpu(cpu) {
+ bool other_cpu = (cpu != smp_processor_id());
- if (other_cpu &&
- HYPERVISOR_vcpu_op(VCPUOP_down, cpu, NULL))
- BUG();
+ if (other_cpu &&
+ HYPERVISOR_vcpu_op(VCPUOP_down, cpu, NULL))
+ BUG();
+ xen_setup_runstate_info(cpu);
+
+ if (have_vcpu_info_placement)
xen_vcpu_setup(cpu);
- if (other_cpu &&
- HYPERVISOR_vcpu_op(VCPUOP_up, cpu, NULL))
- BUG();
- }
-
- BUG_ON(!have_vcpu_info_placement);
+ if (other_cpu &&
+ HYPERVISOR_vcpu_op(VCPUOP_up, cpu, NULL))
+ BUG();
}
}
@@ -1180,6 +1179,8 @@
xen_raw_console_write("about to get started...\n");
+ xen_setup_runstate_info(0);
+
/* Start the world */
#ifdef CONFIG_X86_32
i386_start_kernel();
diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
index 3bf7b1d..bf4cd6b 100644
--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -185,7 +185,7 @@
}
/* Build the parallel p2m_top_mfn structures */
-static void __init xen_build_mfn_list_list(void)
+void xen_build_mfn_list_list(void)
{
unsigned pfn, idx;
diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c
index 738da0c..64757c0 100644
--- a/arch/x86/xen/smp.c
+++ b/arch/x86/xen/smp.c
@@ -295,6 +295,7 @@
(unsigned long)task_stack_page(idle) -
KERNEL_STACK_OFFSET + THREAD_SIZE;
#endif
+ xen_setup_runstate_info(cpu);
xen_setup_timer(cpu);
xen_init_lock_cpu(cpu);
diff --git a/arch/x86/xen/suspend.c b/arch/x86/xen/suspend.c
index 95be7b4..987267f 100644
--- a/arch/x86/xen/suspend.c
+++ b/arch/x86/xen/suspend.c
@@ -1,4 +1,5 @@
#include <linux/types.h>
+#include <linux/clockchips.h>
#include <xen/interface/xen.h>
#include <xen/grant_table.h>
@@ -27,6 +28,8 @@
void xen_post_suspend(int suspend_cancelled)
{
+ xen_build_mfn_list_list();
+
xen_setup_shared_info();
if (suspend_cancelled) {
@@ -44,7 +47,19 @@
}
+static void xen_vcpu_notify_restore(void *data)
+{
+ unsigned long reason = (unsigned long)data;
+
+ /* Boot processor notified via generic timekeeping_resume() */
+ if ( smp_processor_id() == 0)
+ return;
+
+ clockevents_notify(reason, NULL);
+}
+
void xen_arch_resume(void)
{
- /* nothing */
+ smp_call_function(xen_vcpu_notify_restore,
+ (void *)CLOCK_EVT_NOTIFY_RESUME, 1);
}
diff --git a/arch/x86/xen/time.c b/arch/x86/xen/time.c
index 0a5aa44..9d1f853 100644
--- a/arch/x86/xen/time.c
+++ b/arch/x86/xen/time.c
@@ -100,7 +100,7 @@
return per_cpu(runstate, vcpu).state == RUNSTATE_runnable;
}
-static void setup_runstate_info(int cpu)
+void xen_setup_runstate_info(int cpu)
{
struct vcpu_register_runstate_memory_area area;
@@ -434,7 +434,7 @@
name = "<timer kasprintf failed>";
irq = bind_virq_to_irqhandler(VIRQ_TIMER, cpu, xen_timer_interrupt,
- IRQF_DISABLED|IRQF_PERCPU|IRQF_NOBALANCING,
+ IRQF_DISABLED|IRQF_PERCPU|IRQF_NOBALANCING|IRQF_TIMER,
name, NULL);
evt = &per_cpu(xen_clock_events, cpu);
@@ -442,8 +442,6 @@
evt->cpumask = cpumask_of(cpu);
evt->irq = irq;
-
- setup_runstate_info(cpu);
}
void xen_teardown_timer(int cpu)
@@ -494,6 +492,7 @@
setup_force_cpu_cap(X86_FEATURE_TSC);
+ xen_setup_runstate_info(cpu);
xen_setup_timer(cpu);
xen_setup_cpu_clockevents();
}
diff --git a/arch/x86/xen/xen-asm_64.S b/arch/x86/xen/xen-asm_64.S
index 02f496a..53adefd 100644
--- a/arch/x86/xen/xen-asm_64.S
+++ b/arch/x86/xen/xen-asm_64.S
@@ -96,7 +96,7 @@
pushq $__USER32_CS
pushq %rcx
- pushq $VGCF_in_syscall
+ pushq $0
1: jmp hypercall_iret
ENDPATCH(xen_sysret32)
RELOC(xen_sysret32, 1b+1)
@@ -151,7 +151,7 @@
ENTRY(xen_sysenter_target)
lea 16(%rsp), %rsp /* strip %rcx, %r11 */
mov $-ENOSYS, %rax
- pushq $VGCF_in_syscall
+ pushq $0
jmp hypercall_iret
ENDPROC(xen_syscall32_target)
ENDPROC(xen_sysenter_target)
diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h
index 355fa6b..f9153a3 100644
--- a/arch/x86/xen/xen-ops.h
+++ b/arch/x86/xen/xen-ops.h
@@ -25,6 +25,7 @@
void xen_setup_mfn_list_list(void);
void xen_setup_shared_info(void);
+void xen_build_mfn_list_list(void);
void xen_setup_machphys_mapping(void);
pgd_t *xen_setup_kernel_pagetable(pgd_t *pgd, unsigned long max_pfn);
void xen_ident_map_ISA(void);
@@ -41,6 +42,7 @@
void xen_init_irq_ops(void);
void xen_setup_timer(int cpu);
+void xen_setup_runstate_info(int cpu);
void xen_teardown_timer(int cpu);
cycle_t xen_clocksource_read(void);
void xen_setup_cpu_clockevents(void);
diff --git a/block/blk-iopoll.c b/block/blk-iopoll.c
index ca56420..58916af 100644
--- a/block/blk-iopoll.c
+++ b/block/blk-iopoll.c
@@ -28,7 +28,7 @@
* Description:
* Add this blk_iopoll structure to the pending poll list and trigger the
* raise of the blk iopoll softirq. The driver must already have gotten a
- * succesful return from blk_iopoll_sched_prep() before calling this.
+ * successful return from blk_iopoll_sched_prep() before calling this.
**/
void blk_iopoll_sched(struct blk_iopoll *iop)
{
diff --git a/drivers/Kconfig b/drivers/Kconfig
index 48bbdbe..26e434a 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -1,5 +1,3 @@
-# drivers/Kconfig
-
menu "Device Drivers"
source "drivers/base/Kconfig"
diff --git a/drivers/acpi/acpi_memhotplug.c b/drivers/acpi/acpi_memhotplug.c
index 28ccdbc..3597d73 100644
--- a/drivers/acpi/acpi_memhotplug.c
+++ b/drivers/acpi/acpi_memhotplug.c
@@ -537,7 +537,7 @@
status = acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
ACPI_UINT32_MAX,
- acpi_memory_register_notify_handler,
+ acpi_memory_register_notify_handler, NULL,
NULL, NULL);
if (ACPI_FAILURE(status)) {
@@ -561,7 +561,7 @@
*/
status = acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
ACPI_UINT32_MAX,
- acpi_memory_deregister_notify_handler,
+ acpi_memory_deregister_notify_handler, NULL,
NULL, NULL);
if (ACPI_FAILURE(status))
diff --git a/drivers/acpi/acpica/Makefile b/drivers/acpi/acpica/Makefile
index e7973bc..7423052 100644
--- a/drivers/acpi/acpica/Makefile
+++ b/drivers/acpi/acpica/Makefile
@@ -28,7 +28,7 @@
acpi-y += nsaccess.o nsload.o nssearch.o nsxfeval.o \
nsalloc.o nseval.o nsnames.o nsutils.o nsxfname.o \
nsdump.o nsinit.o nsobject.o nswalk.o nsxfobj.o \
- nsparse.o nspredef.o nsrepair.o
+ nsparse.o nspredef.o nsrepair.o nsrepair2.o
acpi-$(ACPI_FUTURE_USAGE) += nsdumpdv.o
diff --git a/drivers/acpi/acpica/acmacros.h b/drivers/acpi/acpica/acmacros.h
index 3acd9c6..7d9ba6e 100644
--- a/drivers/acpi/acpica/acmacros.h
+++ b/drivers/acpi/acpica/acmacros.h
@@ -341,6 +341,7 @@
#define ACPI_ERROR_NAMESPACE(s, e) acpi_ns_report_error (AE_INFO, s, e);
#define ACPI_ERROR_METHOD(s, n, p, e) acpi_ns_report_method_error (AE_INFO, s, n, p, e);
#define ACPI_WARN_PREDEFINED(plist) acpi_ut_predefined_warning plist
+#define ACPI_INFO_PREDEFINED(plist) acpi_ut_predefined_info plist
#else
@@ -349,6 +350,8 @@
#define ACPI_ERROR_NAMESPACE(s, e)
#define ACPI_ERROR_METHOD(s, n, p, e)
#define ACPI_WARN_PREDEFINED(plist)
+#define ACPI_INFO_PREDEFINED(plist)
+
#endif /* ACPI_NO_ERROR_MESSAGES */
/*
diff --git a/drivers/acpi/acpica/acnamesp.h b/drivers/acpi/acpica/acnamesp.h
index 09a2764..ab83919 100644
--- a/drivers/acpi/acpica/acnamesp.h
+++ b/drivers/acpi/acpica/acnamesp.h
@@ -104,7 +104,8 @@
acpi_handle start_object,
u32 max_depth,
u32 flags,
- acpi_walk_callback user_function,
+ acpi_walk_callback pre_order_visit,
+ acpi_walk_callback post_order_visit,
void *context, void **return_value);
struct acpi_namespace_node *acpi_ns_get_next_node(struct acpi_namespace_node
@@ -272,7 +273,8 @@
acpi_object_handler handler, void **data);
/*
- * nsrepair - return object repair for predefined methods/objects
+ * nsrepair - General return object repair for all
+ * predefined methods/objects
*/
acpi_status
acpi_ns_repair_object(struct acpi_predefined_data *data,
@@ -285,6 +287,16 @@
union acpi_operand_object **obj_desc_ptr);
/*
+ * nsrepair2 - Return object repair for specific
+ * predefined methods/objects
+ */
+acpi_status
+acpi_ns_complex_repairs(struct acpi_predefined_data *data,
+ struct acpi_namespace_node *node,
+ acpi_status validate_status,
+ union acpi_operand_object **return_object_ptr);
+
+/*
* nssearch - Namespace searching and entry
*/
acpi_status
diff --git a/drivers/acpi/acpica/acutils.h b/drivers/acpi/acpica/acutils.h
index 863a264..3a451a2 100644
--- a/drivers/acpi/acpica/acutils.h
+++ b/drivers/acpi/acpica/acutils.h
@@ -386,6 +386,8 @@
union acpi_operand_object *acpi_ut_create_package_object(u32 count);
+union acpi_operand_object *acpi_ut_create_integer_object(u64 value);
+
union acpi_operand_object *acpi_ut_create_buffer_object(acpi_size buffer_size);
union acpi_operand_object *acpi_ut_create_string_object(acpi_size string_size);
@@ -481,6 +483,11 @@
char *pathname,
u8 node_flags, const char *format, ...);
+void ACPI_INTERNAL_VAR_XFACE
+acpi_ut_predefined_info(const char *module_name,
+ u32 line_number,
+ char *pathname, u8 node_flags, const char *format, ...);
+
/* Values for Base above (16=Hex, 10=Decimal) */
#define ACPI_ANY_BASE 0
diff --git a/drivers/acpi/acpica/dsinit.c b/drivers/acpi/acpica/dsinit.c
index 3aae13f..f23fa0b 100644
--- a/drivers/acpi/acpica/dsinit.c
+++ b/drivers/acpi/acpica/dsinit.c
@@ -192,7 +192,7 @@
status =
acpi_ns_walk_namespace(ACPI_TYPE_ANY, start_node, ACPI_UINT32_MAX,
ACPI_NS_WALK_UNLOCK, acpi_ds_init_one_object,
- &info, NULL);
+ NULL, &info, NULL);
if (ACPI_FAILURE(status)) {
ACPI_EXCEPTION((AE_INFO, status, "During WalkNamespace"));
}
diff --git a/drivers/acpi/acpica/dsmthdat.c b/drivers/acpi/acpica/dsmthdat.c
index 7d077bb..0ba19f8 100644
--- a/drivers/acpi/acpica/dsmthdat.c
+++ b/drivers/acpi/acpica/dsmthdat.c
@@ -409,13 +409,11 @@
/* If slack enabled, init the local_x/arg_x to an Integer of value zero */
if (acpi_gbl_enable_interpreter_slack) {
- object =
- acpi_ut_create_internal_object(ACPI_TYPE_INTEGER);
+ object = acpi_ut_create_integer_object((u64) 0);
if (!object) {
return_ACPI_STATUS(AE_NO_MEMORY);
}
- object->integer.value = 0;
node->object = object;
}
diff --git a/drivers/acpi/acpica/dsobject.c b/drivers/acpi/acpica/dsobject.c
index 507e1f0..9bc1ba0 100644
--- a/drivers/acpi/acpica/dsobject.c
+++ b/drivers/acpi/acpica/dsobject.c
@@ -486,7 +486,7 @@
*
* Note: technically, this is an error, from ACPI spec: "It is an error
* for NumElements to be less than the number of elements in the
- * PackageList". However, we just print an error message and
+ * PackageList". However, we just print a message and
* no exception is returned. This provides Windows compatibility. Some
* BIOSs will alter the num_elements on the fly, creating this type
* of ill-formed package object.
@@ -510,9 +510,9 @@
arg = arg->common.next;
}
- ACPI_WARNING((AE_INFO,
- "Package List length (0x%X) larger than NumElements count (0x%X), truncated\n",
- i, element_count));
+ ACPI_INFO((AE_INFO,
+ "Actual Package length (0x%X) is larger than NumElements field (0x%X), truncated\n",
+ i, element_count));
} else if (i < element_count) {
/*
* Arg list (elements) was exhausted, but we did not reach num_elements count.
diff --git a/drivers/acpi/acpica/dswload.c b/drivers/acpi/acpica/dswload.c
index 6de3a99..10fc785 100644
--- a/drivers/acpi/acpica/dswload.c
+++ b/drivers/acpi/acpica/dswload.c
@@ -639,26 +639,42 @@
break;
case AML_SCOPE_OP:
- /*
- * The Path is an object reference to an existing object.
- * Don't enter the name into the namespace, but look it up
- * for use later.
- */
- status =
- acpi_ns_lookup(walk_state->scope_info, buffer_ptr,
- object_type, ACPI_IMODE_EXECUTE,
- ACPI_NS_SEARCH_PARENT, walk_state, &(node));
- if (ACPI_FAILURE(status)) {
-#ifdef ACPI_ASL_COMPILER
- if (status == AE_NOT_FOUND) {
- status = AE_OK;
- } else {
- ACPI_ERROR_NAMESPACE(buffer_ptr, status);
+
+ /* Special case for Scope(\) -> refers to the Root node */
+
+ if (op && (op->named.node == acpi_gbl_root_node)) {
+ node = op->named.node;
+
+ status =
+ acpi_ds_scope_stack_push(node, object_type,
+ walk_state);
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
}
+ } else {
+ /*
+ * The Path is an object reference to an existing object.
+ * Don't enter the name into the namespace, but look it up
+ * for use later.
+ */
+ status =
+ acpi_ns_lookup(walk_state->scope_info, buffer_ptr,
+ object_type, ACPI_IMODE_EXECUTE,
+ ACPI_NS_SEARCH_PARENT, walk_state,
+ &(node));
+ if (ACPI_FAILURE(status)) {
+#ifdef ACPI_ASL_COMPILER
+ if (status == AE_NOT_FOUND) {
+ status = AE_OK;
+ } else {
+ ACPI_ERROR_NAMESPACE(buffer_ptr,
+ status);
+ }
#else
- ACPI_ERROR_NAMESPACE(buffer_ptr, status);
+ ACPI_ERROR_NAMESPACE(buffer_ptr, status);
#endif
- return_ACPI_STATUS(status);
+ return_ACPI_STATUS(status);
+ }
}
/*
diff --git a/drivers/acpi/acpica/evgpeblk.c b/drivers/acpi/acpica/evgpeblk.c
index a60aaa7..2479209 100644
--- a/drivers/acpi/acpica/evgpeblk.c
+++ b/drivers/acpi/acpica/evgpeblk.c
@@ -945,8 +945,8 @@
status = acpi_ns_walk_namespace(ACPI_TYPE_METHOD, gpe_device,
ACPI_UINT32_MAX, ACPI_NS_WALK_NO_UNLOCK,
- acpi_ev_save_method_info, gpe_block,
- NULL);
+ acpi_ev_save_method_info, NULL,
+ gpe_block, NULL);
/* Return the new block */
@@ -1022,8 +1022,8 @@
status =
acpi_ns_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
ACPI_UINT32_MAX, ACPI_NS_WALK_UNLOCK,
- acpi_ev_match_prw_and_gpe, &gpe_info,
- NULL);
+ acpi_ev_match_prw_and_gpe, NULL,
+ &gpe_info, NULL);
}
/*
diff --git a/drivers/acpi/acpica/evregion.c b/drivers/acpi/acpica/evregion.c
index 98c7f9c..0bc807c 100644
--- a/drivers/acpi/acpica/evregion.c
+++ b/drivers/acpi/acpica/evregion.c
@@ -51,6 +51,10 @@
ACPI_MODULE_NAME("evregion")
/* Local prototypes */
+static u8
+acpi_ev_has_default_handler(struct acpi_namespace_node *node,
+ acpi_adr_space_type space_id);
+
static acpi_status
acpi_ev_reg_run(acpi_handle obj_handle,
u32 level, void *context, void **return_value);
@@ -142,6 +146,50 @@
/*******************************************************************************
*
+ * FUNCTION: acpi_ev_has_default_handler
+ *
+ * PARAMETERS: Node - Namespace node for the device
+ * space_id - The address space ID
+ *
+ * RETURN: TRUE if default handler is installed, FALSE otherwise
+ *
+ * DESCRIPTION: Check if the default handler is installed for the requested
+ * space ID.
+ *
+ ******************************************************************************/
+
+static u8
+acpi_ev_has_default_handler(struct acpi_namespace_node *node,
+ acpi_adr_space_type space_id)
+{
+ union acpi_operand_object *obj_desc;
+ union acpi_operand_object *handler_obj;
+
+ /* Must have an existing internal object */
+
+ obj_desc = acpi_ns_get_attached_object(node);
+ if (obj_desc) {
+ handler_obj = obj_desc->device.handler;
+
+ /* Walk the linked list of handlers for this object */
+
+ while (handler_obj) {
+ if (handler_obj->address_space.space_id == space_id) {
+ if (handler_obj->address_space.handler_flags &
+ ACPI_ADDR_HANDLER_DEFAULT_INSTALLED) {
+ return (TRUE);
+ }
+ }
+
+ handler_obj = handler_obj->address_space.next;
+ }
+ }
+
+ return (FALSE);
+}
+
+/*******************************************************************************
+ *
* FUNCTION: acpi_ev_initialize_op_regions
*
* PARAMETERS: None
@@ -169,12 +217,18 @@
for (i = 0; i < ACPI_NUM_DEFAULT_SPACES; i++) {
/*
- * TBD: Make sure handler is the DEFAULT handler, otherwise
- * _REG will have already been run.
+ * Make sure the installed handler is the DEFAULT handler. If not the
+ * default, the _REG methods will have already been run (when the
+ * handler was installed)
*/
- status = acpi_ev_execute_reg_methods(acpi_gbl_root_node,
- acpi_gbl_default_address_spaces
- [i]);
+ if (acpi_ev_has_default_handler(acpi_gbl_root_node,
+ acpi_gbl_default_address_spaces
+ [i])) {
+ status =
+ acpi_ev_execute_reg_methods(acpi_gbl_root_node,
+ acpi_gbl_default_address_spaces
+ [i]);
+ }
}
(void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
@@ -235,23 +289,20 @@
* connection status 1 for connecting the handler, 0 for disconnecting
* the handler (Passed as a parameter)
*/
- args[0] = acpi_ut_create_internal_object(ACPI_TYPE_INTEGER);
+ args[0] =
+ acpi_ut_create_integer_object((u64) region_obj->region.space_id);
if (!args[0]) {
status = AE_NO_MEMORY;
goto cleanup1;
}
- args[1] = acpi_ut_create_internal_object(ACPI_TYPE_INTEGER);
+ args[1] = acpi_ut_create_integer_object((u64) function);
if (!args[1]) {
status = AE_NO_MEMORY;
goto cleanup2;
}
- /* Setup the parameter objects */
-
- args[0]->integer.value = region_obj->region.space_id;
- args[1]->integer.value = function;
- args[2] = NULL;
+ args[2] = NULL; /* Terminate list */
/* Execute the method, no return value */
@@ -971,8 +1022,8 @@
*/
status = acpi_ns_walk_namespace(ACPI_TYPE_ANY, node, ACPI_UINT32_MAX,
ACPI_NS_WALK_UNLOCK,
- acpi_ev_install_handler, handler_obj,
- NULL);
+ acpi_ev_install_handler, NULL,
+ handler_obj, NULL);
unlock_and_exit:
return_ACPI_STATUS(status);
@@ -1008,7 +1059,7 @@
*/
status = acpi_ns_walk_namespace(ACPI_TYPE_ANY, node, ACPI_UINT32_MAX,
ACPI_NS_WALK_UNLOCK, acpi_ev_reg_run,
- &space_id, NULL);
+ NULL, &space_id, NULL);
return_ACPI_STATUS(status);
}
diff --git a/drivers/acpi/acpica/exconfig.c b/drivers/acpi/acpica/exconfig.c
index 24afef8..46adfa5 100644
--- a/drivers/acpi/acpica/exconfig.c
+++ b/drivers/acpi/acpica/exconfig.c
@@ -170,14 +170,12 @@
/* Table not found, return an Integer=0 and AE_OK */
- ddb_handle = acpi_ut_create_internal_object(ACPI_TYPE_INTEGER);
+ ddb_handle = acpi_ut_create_integer_object((u64) 0);
if (!ddb_handle) {
return_ACPI_STATUS(AE_NO_MEMORY);
}
- ddb_handle->integer.value = 0;
*return_desc = ddb_handle;
-
return_ACPI_STATUS(AE_OK);
}
diff --git a/drivers/acpi/acpica/exconvrt.c b/drivers/acpi/acpica/exconvrt.c
index 37d0d39..51d5f22 100644
--- a/drivers/acpi/acpica/exconvrt.c
+++ b/drivers/acpi/acpica/exconvrt.c
@@ -167,7 +167,7 @@
/* Create a new integer */
- return_desc = acpi_ut_create_internal_object(ACPI_TYPE_INTEGER);
+ return_desc = acpi_ut_create_integer_object(result);
if (!return_desc) {
return_ACPI_STATUS(AE_NO_MEMORY);
}
@@ -177,7 +177,6 @@
/* Save the Result */
- return_desc->integer.value = result;
acpi_ex_truncate_for32bit_table(return_desc);
*result_desc = return_desc;
return_ACPI_STATUS(AE_OK);
diff --git a/drivers/acpi/acpica/exfield.c b/drivers/acpi/acpica/exfield.c
index 0b33d6c..1588a2d 100644
--- a/drivers/acpi/acpica/exfield.c
+++ b/drivers/acpi/acpica/exfield.c
@@ -162,13 +162,12 @@
} else {
/* Field will fit within an Integer (normal case) */
- buffer_desc = acpi_ut_create_internal_object(ACPI_TYPE_INTEGER);
+ buffer_desc = acpi_ut_create_integer_object((u64) 0);
if (!buffer_desc) {
return_ACPI_STATUS(AE_NO_MEMORY);
}
length = acpi_gbl_integer_byte_width;
- buffer_desc->integer.value = 0;
buffer = &buffer_desc->integer.value;
}
diff --git a/drivers/acpi/acpica/exoparg1.c b/drivers/acpi/acpica/exoparg1.c
index 9635d21..752fe48 100644
--- a/drivers/acpi/acpica/exoparg1.c
+++ b/drivers/acpi/acpica/exoparg1.c
@@ -100,12 +100,12 @@
/* Create a return object of type Integer */
- return_desc = acpi_ut_create_internal_object(ACPI_TYPE_INTEGER);
+ return_desc =
+ acpi_ut_create_integer_object(acpi_os_get_timer());
if (!return_desc) {
status = AE_NO_MEMORY;
goto cleanup;
}
- return_desc->integer.value = acpi_os_get_timer();
break;
default: /* Unknown opcode */
@@ -599,7 +599,7 @@
switch (walk_state->opcode) {
case AML_LNOT_OP: /* LNot (Operand) */
- return_desc = acpi_ut_create_internal_object(ACPI_TYPE_INTEGER);
+ return_desc = acpi_ut_create_integer_object((u64) 0);
if (!return_desc) {
status = AE_NO_MEMORY;
goto cleanup;
@@ -702,13 +702,11 @@
/* Allocate a descriptor to hold the type. */
- return_desc = acpi_ut_create_internal_object(ACPI_TYPE_INTEGER);
+ return_desc = acpi_ut_create_integer_object((u64) type);
if (!return_desc) {
status = AE_NO_MEMORY;
goto cleanup;
}
-
- return_desc->integer.value = type;
break;
case AML_SIZE_OF_OP: /* size_of (source_object) */
@@ -777,13 +775,11 @@
* Now that we have the size of the object, create a result
* object to hold the value
*/
- return_desc = acpi_ut_create_internal_object(ACPI_TYPE_INTEGER);
+ return_desc = acpi_ut_create_integer_object(value);
if (!return_desc) {
status = AE_NO_MEMORY;
goto cleanup;
}
-
- return_desc->integer.value = value;
break;
case AML_REF_OF_OP: /* ref_of (source_object) */
@@ -946,24 +942,24 @@
* NOTE: index into a buffer is NOT a pointer to a
* sub-buffer of the main buffer, it is only a pointer to a
* single element (byte) of the buffer!
- */
- return_desc =
- acpi_ut_create_internal_object
- (ACPI_TYPE_INTEGER);
- if (!return_desc) {
- status = AE_NO_MEMORY;
- goto cleanup;
- }
-
- /*
+ *
* Since we are returning the value of the buffer at the
* indexed location, we don't need to add an additional
* reference to the buffer itself.
*/
- return_desc->integer.value =
- temp_desc->buffer.
- pointer[operand[0]->reference.
- value];
+ return_desc =
+ acpi_ut_create_integer_object((u64)
+ temp_desc->
+ buffer.
+ pointer
+ [operand
+ [0]->
+ reference.
+ value]);
+ if (!return_desc) {
+ status = AE_NO_MEMORY;
+ goto cleanup;
+ }
break;
case ACPI_TYPE_PACKAGE:
diff --git a/drivers/acpi/acpica/exoparg6.c b/drivers/acpi/acpica/exoparg6.c
index ae43f76..295542e 100644
--- a/drivers/acpi/acpica/exoparg6.c
+++ b/drivers/acpi/acpica/exoparg6.c
@@ -253,18 +253,15 @@
}
/* Create an integer for the return value */
+ /* Default return value is ACPI_INTEGER_MAX if no match found */
- return_desc = acpi_ut_create_internal_object(ACPI_TYPE_INTEGER);
+ return_desc = acpi_ut_create_integer_object(ACPI_INTEGER_MAX);
if (!return_desc) {
status = AE_NO_MEMORY;
goto cleanup;
}
- /* Default return value if no match found */
-
- return_desc->integer.value = ACPI_INTEGER_MAX;
-
/*
* Examine each element until a match is found. Both match conditions
* must be satisfied for a match to occur. Within the loop,
diff --git a/drivers/acpi/acpica/nsdump.c b/drivers/acpi/acpica/nsdump.c
index 2bad613..2deb986 100644
--- a/drivers/acpi/acpica/nsdump.c
+++ b/drivers/acpi/acpica/nsdump.c
@@ -634,8 +634,8 @@
(void)acpi_ns_walk_namespace(type, start_handle, max_depth,
ACPI_NS_WALK_NO_UNLOCK |
ACPI_NS_WALK_TEMP_NODES,
- acpi_ns_dump_one_object, (void *)&info,
- NULL);
+ acpi_ns_dump_one_object, NULL,
+ (void *)&info, NULL);
}
#endif /* ACPI_FUTURE_USAGE */
diff --git a/drivers/acpi/acpica/nsdumpdv.c b/drivers/acpi/acpica/nsdumpdv.c
index 0fe87f1..36be7f0 100644
--- a/drivers/acpi/acpica/nsdumpdv.c
+++ b/drivers/acpi/acpica/nsdumpdv.c
@@ -131,7 +131,8 @@
status = acpi_ns_walk_namespace(ACPI_TYPE_DEVICE, sys_bus_handle,
ACPI_UINT32_MAX, ACPI_NS_WALK_NO_UNLOCK,
- acpi_ns_dump_one_device, NULL, NULL);
+ acpi_ns_dump_one_device, NULL, NULL,
+ NULL);
}
#endif
diff --git a/drivers/acpi/acpica/nseval.c b/drivers/acpi/acpica/nseval.c
index 846d113..f771e97 100644
--- a/drivers/acpi/acpica/nseval.c
+++ b/drivers/acpi/acpica/nseval.c
@@ -366,33 +366,49 @@
acpi_ns_exec_module_code(union acpi_operand_object *method_obj,
struct acpi_evaluate_info *info)
{
- union acpi_operand_object *root_obj;
+ union acpi_operand_object *parent_obj;
+ struct acpi_namespace_node *parent_node;
+ acpi_object_type type;
acpi_status status;
ACPI_FUNCTION_TRACE(ns_exec_module_code);
+ /*
+ * Get the parent node. We cheat by using the next_object field
+ * of the method object descriptor.
+ */
+ parent_node = ACPI_CAST_PTR(struct acpi_namespace_node,
+ method_obj->method.next_object);
+ type = acpi_ns_get_type(parent_node);
+
+ /* Must clear next_object (acpi_ns_attach_object needs the field) */
+
+ method_obj->method.next_object = NULL;
+
/* Initialize the evaluation information block */
ACPI_MEMSET(info, 0, sizeof(struct acpi_evaluate_info));
- info->prefix_node = acpi_gbl_root_node;
+ info->prefix_node = parent_node;
/*
- * Get the currently attached root object. Add a reference, because the
+ * Get the currently attached parent object. Add a reference, because the
* ref count will be decreased when the method object is installed to
- * the root node.
+ * the parent node.
*/
- root_obj = acpi_ns_get_attached_object(acpi_gbl_root_node);
- acpi_ut_add_reference(root_obj);
+ parent_obj = acpi_ns_get_attached_object(parent_node);
+ if (parent_obj) {
+ acpi_ut_add_reference(parent_obj);
+ }
- /* Install the method (module-level code) in the root node */
+ /* Install the method (module-level code) in the parent node */
- status = acpi_ns_attach_object(acpi_gbl_root_node, method_obj,
+ status = acpi_ns_attach_object(parent_node, method_obj,
ACPI_TYPE_METHOD);
if (ACPI_FAILURE(status)) {
goto exit;
}
- /* Execute the root node as a control method */
+ /* Execute the parent node as a control method */
status = acpi_ns_evaluate(info);
@@ -401,15 +417,19 @@
/* Detach the temporary method object */
- acpi_ns_detach_object(acpi_gbl_root_node);
+ acpi_ns_detach_object(parent_node);
- /* Restore the original root object */
+ /* Restore the original parent object */
- status =
- acpi_ns_attach_object(acpi_gbl_root_node, root_obj,
- ACPI_TYPE_DEVICE);
+ if (parent_obj) {
+ status = acpi_ns_attach_object(parent_node, parent_obj, type);
+ } else {
+ parent_node->type = (u8)type;
+ }
exit:
- acpi_ut_remove_reference(root_obj);
+ if (parent_obj) {
+ acpi_ut_remove_reference(parent_obj);
+ }
return_VOID;
}
diff --git a/drivers/acpi/acpica/nsinit.c b/drivers/acpi/acpica/nsinit.c
index 1d5b360..4f8abac 100644
--- a/drivers/acpi/acpica/nsinit.c
+++ b/drivers/acpi/acpica/nsinit.c
@@ -96,7 +96,7 @@
/* Walk entire namespace from the supplied root */
status = acpi_walk_namespace(ACPI_TYPE_ANY, ACPI_ROOT_OBJECT,
- ACPI_UINT32_MAX, acpi_ns_init_one_object,
+ ACPI_UINT32_MAX, acpi_ns_init_one_object, NULL,
&info, NULL);
if (ACPI_FAILURE(status)) {
ACPI_EXCEPTION((AE_INFO, status, "During WalkNamespace"));
@@ -156,7 +156,8 @@
status = acpi_ns_walk_namespace(ACPI_TYPE_ANY, ACPI_ROOT_OBJECT,
ACPI_UINT32_MAX, FALSE,
- acpi_ns_find_ini_methods, &info, NULL);
+ acpi_ns_find_ini_methods, NULL, &info,
+ NULL);
if (ACPI_FAILURE(status)) {
goto error_exit;
}
@@ -189,7 +190,8 @@
status = acpi_ns_walk_namespace(ACPI_TYPE_ANY, ACPI_ROOT_OBJECT,
ACPI_UINT32_MAX, FALSE,
- acpi_ns_init_one_device, &info, NULL);
+ acpi_ns_init_one_device, NULL, &info,
+ NULL);
ACPI_FREE(info.evaluate_info);
if (ACPI_FAILURE(status)) {
diff --git a/drivers/acpi/acpica/nspredef.c b/drivers/acpi/acpica/nspredef.c
index f8427af..b05f429 100644
--- a/drivers/acpi/acpica/nspredef.c
+++ b/drivers/acpi/acpica/nspredef.c
@@ -232,6 +232,12 @@
status = acpi_ns_check_package(data, return_object_ptr);
}
+ /*
+ * Perform additional, more complicated repairs on a per-name
+ * basis.
+ */
+ status = acpi_ns_complex_repairs(data, node, status, return_object_ptr);
+
check_validation_status:
/*
* If the object validation failed or if we successfully repaired one
@@ -601,7 +607,8 @@
* there is only one entry). We may be able to repair this by
* wrapping the returned Package with a new outer Package.
*/
- if ((*elements)->common.type != ACPI_TYPE_PACKAGE) {
+ if (*elements
+ && ((*elements)->common.type != ACPI_TYPE_PACKAGE)) {
/* Create the new outer package and populate it */
@@ -673,6 +680,7 @@
union acpi_operand_object *sub_package;
union acpi_operand_object **sub_elements;
acpi_status status;
+ u8 non_trailing_null = FALSE;
u32 expected_count;
u32 i;
u32 j;
@@ -680,6 +688,45 @@
/* Validate each sub-Package in the parent Package */
for (i = 0; i < count; i++) {
+ /*
+ * Handling for NULL package elements. For now, we will simply allow
+ * a parent package with trailing NULL elements. This can happen if
+ * the package was defined to be longer than the initializer list.
+ * This is legal as per the ACPI specification. It is often used
+ * to allow for dynamic initialization of a Package.
+ *
+ * A future enhancement may be to simply truncate the package to
+ * remove the trailing NULL elements.
+ */
+ if (!(*elements)) {
+ if (!non_trailing_null) {
+
+ /* Ensure the remaining elements are all NULL */
+
+ for (j = 1; j < (count - i + 1); j++) {
+ if (elements[j]) {
+ non_trailing_null = TRUE;
+ }
+ }
+
+ if (!non_trailing_null) {
+
+ /* Ignore the trailing NULL elements */
+
+ return (AE_OK);
+ }
+ }
+
+ /* There are trailing non-null elements, issue warning */
+
+ ACPI_WARN_PREDEFINED((AE_INFO, data->pathname,
+ data->node_flags,
+ "Found NULL element at package index %u",
+ i));
+ elements++;
+ continue;
+ }
+
sub_package = *elements;
sub_elements = sub_package->package.elements;
diff --git a/drivers/acpi/acpica/nsrepair.c b/drivers/acpi/acpica/nsrepair.c
index db2b2a9..d563f1a 100644
--- a/drivers/acpi/acpica/nsrepair.c
+++ b/drivers/acpi/acpica/nsrepair.c
@@ -44,6 +44,7 @@
#include <acpi/acpi.h>
#include "accommon.h"
#include "acnamesp.h"
+#include "acinterp.h"
#include "acpredef.h"
#define _COMPONENT ACPI_NAMESPACE
@@ -76,7 +77,13 @@
union acpi_operand_object *return_object = *return_object_ptr;
union acpi_operand_object *new_object;
acpi_size length;
+ acpi_status status;
+ /*
+ * At this point, we know that the type of the returned object was not
+ * one of the expected types for this predefined name. Attempt to
+ * repair the object. Only a limited number of repairs are possible.
+ */
switch (return_object->common.type) {
case ACPI_TYPE_BUFFER:
@@ -111,43 +118,94 @@
*/
ACPI_MEMCPY(new_object->string.pointer,
return_object->buffer.pointer, length);
+ break;
- /*
- * If the original object is a package element, we need to:
- * 1. Set the reference count of the new object to match the
- * reference count of the old object.
- * 2. Decrement the reference count of the original object.
- */
- if (package_index != ACPI_NOT_PACKAGE_ELEMENT) {
- new_object->common.reference_count =
- return_object->common.reference_count;
+ case ACPI_TYPE_INTEGER:
- if (return_object->common.reference_count > 1) {
- return_object->common.reference_count--;
+ /* 1) Does the method/object legally return a buffer? */
+
+ if (expected_btypes & ACPI_RTYPE_BUFFER) {
+ /*
+ * Convert the Integer to a packed-byte buffer. _MAT needs
+ * this sometimes, if a read has been performed on a Field
+ * object that is less than or equal to the global integer
+ * size (32 or 64 bits).
+ */
+ status =
+ acpi_ex_convert_to_buffer(return_object,
+ &new_object);
+ if (ACPI_FAILURE(status)) {
+ return (status);
}
-
- ACPI_WARN_PREDEFINED((AE_INFO, data->pathname,
- data->node_flags,
- "Converted Buffer to expected String at index %u",
- package_index));
- } else {
- ACPI_WARN_PREDEFINED((AE_INFO, data->pathname,
- data->node_flags,
- "Converted Buffer to expected String"));
}
- /* Delete old object, install the new return object */
+ /* 2) Does the method/object legally return a string? */
- acpi_ut_remove_reference(return_object);
- *return_object_ptr = new_object;
- data->flags |= ACPI_OBJECT_REPAIRED;
- return (AE_OK);
+ else if (expected_btypes & ACPI_RTYPE_STRING) {
+ /*
+ * The only supported Integer-to-String conversion is to convert
+ * an integer of value 0 to a NULL string. The last element of
+ * _BIF and _BIX packages occasionally need this fix.
+ */
+ if (return_object->integer.value != 0) {
+ return (AE_AML_OPERAND_TYPE);
+ }
+
+ /* Allocate a new NULL string object */
+
+ new_object = acpi_ut_create_string_object(0);
+ if (!new_object) {
+ return (AE_NO_MEMORY);
+ }
+ } else {
+ return (AE_AML_OPERAND_TYPE);
+ }
+ break;
default:
- break;
+
+ /* We cannot repair this object */
+
+ return (AE_AML_OPERAND_TYPE);
}
- return (AE_AML_OPERAND_TYPE);
+ /* Object was successfully repaired */
+
+ /*
+ * If the original object is a package element, we need to:
+ * 1. Set the reference count of the new object to match the
+ * reference count of the old object.
+ * 2. Decrement the reference count of the original object.
+ */
+ if (package_index != ACPI_NOT_PACKAGE_ELEMENT) {
+ new_object->common.reference_count =
+ return_object->common.reference_count;
+
+ if (return_object->common.reference_count > 1) {
+ return_object->common.reference_count--;
+ }
+
+ ACPI_INFO_PREDEFINED((AE_INFO, data->pathname, data->node_flags,
+ "Converted %s to expected %s at index %u",
+ acpi_ut_get_object_type_name
+ (return_object),
+ acpi_ut_get_object_type_name(new_object),
+ package_index));
+ } else {
+ ACPI_INFO_PREDEFINED((AE_INFO, data->pathname, data->node_flags,
+ "Converted %s to expected %s",
+ acpi_ut_get_object_type_name
+ (return_object),
+ acpi_ut_get_object_type_name
+ (new_object)));
+ }
+
+ /* Delete old object, install the new return object */
+
+ acpi_ut_remove_reference(return_object);
+ *return_object_ptr = new_object;
+ data->flags |= ACPI_OBJECT_REPAIRED;
+ return (AE_OK);
}
/*******************************************************************************
@@ -196,8 +254,8 @@
*obj_desc_ptr = pkg_obj_desc;
data->flags |= ACPI_OBJECT_REPAIRED;
- ACPI_WARN_PREDEFINED((AE_INFO, data->pathname, data->node_flags,
- "Incorrectly formed Package, attempting repair"));
+ ACPI_INFO_PREDEFINED((AE_INFO, data->pathname, data->node_flags,
+ "Repaired Incorrectly formed Package"));
return (AE_OK);
}
diff --git a/drivers/acpi/acpica/nsrepair2.c b/drivers/acpi/acpica/nsrepair2.c
new file mode 100644
index 0000000..d07b686
--- /dev/null
+++ b/drivers/acpi/acpica/nsrepair2.c
@@ -0,0 +1,540 @@
+/******************************************************************************
+ *
+ * Module Name: nsrepair2 - Repair for objects returned by specific
+ * predefined methods
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2009, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * substantially similar to the "NO WARRANTY" disclaimer below
+ * ("Disclaimer") and any redistribution must be conditioned upon
+ * including a substantially similar Disclaimer requirement for further
+ * binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include <acpi/acpi.h>
+#include "accommon.h"
+#include "acnamesp.h"
+
+#define _COMPONENT ACPI_NAMESPACE
+ACPI_MODULE_NAME("nsrepair2")
+
+/*
+ * Information structure and handler for ACPI predefined names that can
+ * be repaired on a per-name basis.
+ */
+typedef
+acpi_status(*acpi_repair_function) (struct acpi_predefined_data *data,
+ union acpi_operand_object **return_object_ptr);
+
+typedef struct acpi_repair_info {
+ char name[ACPI_NAME_SIZE];
+ acpi_repair_function repair_function;
+
+} acpi_repair_info;
+
+/* Local prototypes */
+
+static const struct acpi_repair_info *acpi_ns_match_repairable_name(struct
+ acpi_namespace_node
+ *node);
+
+static acpi_status
+acpi_ns_repair_ALR(struct acpi_predefined_data *data,
+ union acpi_operand_object **return_object_ptr);
+
+static acpi_status
+acpi_ns_repair_PSS(struct acpi_predefined_data *data,
+ union acpi_operand_object **return_object_ptr);
+
+static acpi_status
+acpi_ns_repair_TSS(struct acpi_predefined_data *data,
+ union acpi_operand_object **return_object_ptr);
+
+static acpi_status
+acpi_ns_check_sorted_list(struct acpi_predefined_data *data,
+ union acpi_operand_object *return_object,
+ u32 expected_count,
+ u32 sort_index,
+ u8 sort_direction, char *sort_key_name);
+
+static acpi_status
+acpi_ns_remove_null_elements(union acpi_operand_object *package);
+
+static acpi_status
+acpi_ns_sort_list(union acpi_operand_object **elements,
+ u32 count, u32 index, u8 sort_direction);
+
+/* Values for sort_direction above */
+
+#define ACPI_SORT_ASCENDING 0
+#define ACPI_SORT_DESCENDING 1
+
+/*
+ * This table contains the names of the predefined methods for which we can
+ * perform more complex repairs.
+ *
+ * _ALR: Sort the list ascending by ambient_illuminance if necessary
+ * _PSS: Sort the list descending by Power if necessary
+ * _TSS: Sort the list descending by Power if necessary
+ */
+static const struct acpi_repair_info acpi_ns_repairable_names[] = {
+ {"_ALR", acpi_ns_repair_ALR},
+ {"_PSS", acpi_ns_repair_PSS},
+ {"_TSS", acpi_ns_repair_TSS},
+ {{0, 0, 0, 0}, NULL} /* Table terminator */
+};
+
+/******************************************************************************
+ *
+ * FUNCTION: acpi_ns_complex_repairs
+ *
+ * PARAMETERS: Data - Pointer to validation data structure
+ * Node - Namespace node for the method/object
+ * validate_status - Original status of earlier validation
+ * return_object_ptr - Pointer to the object returned from the
+ * evaluation of a method or object
+ *
+ * RETURN: Status. AE_OK if repair was successful. If name is not
+ * matched, validate_status is returned.
+ *
+ * DESCRIPTION: Attempt to repair/convert a return object of a type that was
+ * not expected.
+ *
+ *****************************************************************************/
+
+acpi_status
+acpi_ns_complex_repairs(struct acpi_predefined_data *data,
+ struct acpi_namespace_node *node,
+ acpi_status validate_status,
+ union acpi_operand_object **return_object_ptr)
+{
+ const struct acpi_repair_info *predefined;
+ acpi_status status;
+
+ /* Check if this name is in the list of repairable names */
+
+ predefined = acpi_ns_match_repairable_name(node);
+ if (!predefined) {
+ return (validate_status);
+ }
+
+ status = predefined->repair_function(data, return_object_ptr);
+ return (status);
+}
+
+/******************************************************************************
+ *
+ * FUNCTION: acpi_ns_match_repairable_name
+ *
+ * PARAMETERS: Node - Namespace node for the method/object
+ *
+ * RETURN: Pointer to entry in repair table. NULL indicates not found.
+ *
+ * DESCRIPTION: Check an object name against the repairable object list.
+ *
+ *****************************************************************************/
+
+static const struct acpi_repair_info *acpi_ns_match_repairable_name(struct
+ acpi_namespace_node
+ *node)
+{
+ const struct acpi_repair_info *this_name;
+
+ /* Search info table for a repairable predefined method/object name */
+
+ this_name = acpi_ns_repairable_names;
+ while (this_name->repair_function) {
+ if (ACPI_COMPARE_NAME(node->name.ascii, this_name->name)) {
+ return (this_name);
+ }
+ this_name++;
+ }
+
+ return (NULL); /* Not found */
+}
+
+/******************************************************************************
+ *
+ * FUNCTION: acpi_ns_repair_ALR
+ *
+ * PARAMETERS: Data - Pointer to validation data structure
+ * return_object_ptr - Pointer to the object returned from the
+ * evaluation of a method or object
+ *
+ * RETURN: Status. AE_OK if object is OK or was repaired successfully
+ *
+ * DESCRIPTION: Repair for the _ALR object. If necessary, sort the object list
+ * ascending by the ambient illuminance values.
+ *
+ *****************************************************************************/
+
+static acpi_status
+acpi_ns_repair_ALR(struct acpi_predefined_data *data,
+ union acpi_operand_object **return_object_ptr)
+{
+ union acpi_operand_object *return_object = *return_object_ptr;
+ acpi_status status;
+
+ status = acpi_ns_check_sorted_list(data, return_object, 2, 1,
+ ACPI_SORT_ASCENDING,
+ "AmbientIlluminance");
+
+ return (status);
+}
+
+/******************************************************************************
+ *
+ * FUNCTION: acpi_ns_repair_TSS
+ *
+ * PARAMETERS: Data - Pointer to validation data structure
+ * return_object_ptr - Pointer to the object returned from the
+ * evaluation of a method or object
+ *
+ * RETURN: Status. AE_OK if object is OK or was repaired successfully
+ *
+ * DESCRIPTION: Repair for the _TSS object. If necessary, sort the object list
+ * descending by the power dissipation values.
+ *
+ *****************************************************************************/
+
+static acpi_status
+acpi_ns_repair_TSS(struct acpi_predefined_data *data,
+ union acpi_operand_object **return_object_ptr)
+{
+ union acpi_operand_object *return_object = *return_object_ptr;
+ acpi_status status;
+
+ status = acpi_ns_check_sorted_list(data, return_object, 5, 1,
+ ACPI_SORT_DESCENDING,
+ "PowerDissipation");
+
+ return (status);
+}
+
+/******************************************************************************
+ *
+ * FUNCTION: acpi_ns_repair_PSS
+ *
+ * PARAMETERS: Data - Pointer to validation data structure
+ * return_object_ptr - Pointer to the object returned from the
+ * evaluation of a method or object
+ *
+ * RETURN: Status. AE_OK if object is OK or was repaired successfully
+ *
+ * DESCRIPTION: Repair for the _PSS object. If necessary, sort the object list
+ * by the CPU frequencies. Check that the power dissipation values
+ * are all proportional to CPU frequency (i.e., sorting by
+ * frequency should be the same as sorting by power.)
+ *
+ *****************************************************************************/
+
+static acpi_status
+acpi_ns_repair_PSS(struct acpi_predefined_data *data,
+ union acpi_operand_object **return_object_ptr)
+{
+ union acpi_operand_object *return_object = *return_object_ptr;
+ union acpi_operand_object **outer_elements;
+ u32 outer_element_count;
+ union acpi_operand_object **elements;
+ union acpi_operand_object *obj_desc;
+ u32 previous_value;
+ acpi_status status;
+ u32 i;
+
+ /*
+ * Entries (sub-packages) in the _PSS Package must be sorted by power
+ * dissipation, in descending order. If it appears that the list is
+ * incorrectly sorted, sort it. We sort by cpu_frequency, since this
+ * should be proportional to the power.
+ */
+ status = acpi_ns_check_sorted_list(data, return_object, 6, 0,
+ ACPI_SORT_DESCENDING,
+ "CpuFrequency");
+ if (ACPI_FAILURE(status)) {
+ return (status);
+ }
+
+ /*
+ * We now know the list is correctly sorted by CPU frequency. Check if
+ * the power dissipation values are proportional.
+ */
+ previous_value = ACPI_UINT32_MAX;
+ outer_elements = return_object->package.elements;
+ outer_element_count = return_object->package.count;
+
+ for (i = 0; i < outer_element_count; i++) {
+ elements = (*outer_elements)->package.elements;
+ obj_desc = elements[1]; /* Index1 = power_dissipation */
+
+ if ((u32) obj_desc->integer.value > previous_value) {
+ ACPI_WARN_PREDEFINED((AE_INFO, data->pathname,
+ data->node_flags,
+ "SubPackage[%u,%u] - suspicious power dissipation values",
+ i - 1, i));
+ }
+
+ previous_value = (u32) obj_desc->integer.value;
+ outer_elements++;
+ }
+
+ return (AE_OK);
+}
+
+/******************************************************************************
+ *
+ * FUNCTION: acpi_ns_check_sorted_list
+ *
+ * PARAMETERS: Data - Pointer to validation data structure
+ * return_object - Pointer to the top-level returned object
+ * expected_count - Minimum length of each sub-package
+ * sort_index - Sub-package entry to sort on
+ * sort_direction - Ascending or descending
+ * sort_key_name - Name of the sort_index field
+ *
+ * RETURN: Status. AE_OK if the list is valid and is sorted correctly or
+ * has been repaired by sorting the list.
+ *
+ * DESCRIPTION: Check if the package list is valid and sorted correctly by the
+ * sort_index. If not, then sort the list.
+ *
+ *****************************************************************************/
+
+static acpi_status
+acpi_ns_check_sorted_list(struct acpi_predefined_data *data,
+ union acpi_operand_object *return_object,
+ u32 expected_count,
+ u32 sort_index,
+ u8 sort_direction, char *sort_key_name)
+{
+ u32 outer_element_count;
+ union acpi_operand_object **outer_elements;
+ union acpi_operand_object **elements;
+ union acpi_operand_object *obj_desc;
+ u32 i;
+ u32 previous_value;
+ acpi_status status;
+
+ /* The top-level object must be a package */
+
+ if (return_object->common.type != ACPI_TYPE_PACKAGE) {
+ return (AE_AML_OPERAND_TYPE);
+ }
+
+ /*
+ * Detect any NULL package elements and remove them from the
+ * package.
+ *
+ * TBD: We may want to do this for all predefined names that
+ * return a variable-length package of packages.
+ */
+ status = acpi_ns_remove_null_elements(return_object);
+ if (status == AE_NULL_ENTRY) {
+ ACPI_INFO_PREDEFINED((AE_INFO, data->pathname, data->node_flags,
+ "NULL elements removed from package"));
+
+ /* Exit if package is now zero length */
+
+ if (!return_object->package.count) {
+ return (AE_NULL_ENTRY);
+ }
+ }
+
+ outer_elements = return_object->package.elements;
+ outer_element_count = return_object->package.count;
+ if (!outer_element_count) {
+ return (AE_AML_PACKAGE_LIMIT);
+ }
+
+ previous_value = 0;
+ if (sort_direction == ACPI_SORT_DESCENDING) {
+ previous_value = ACPI_UINT32_MAX;
+ }
+
+ /* Examine each subpackage */
+
+ for (i = 0; i < outer_element_count; i++) {
+
+ /* Each element of the top-level package must also be a package */
+
+ if ((*outer_elements)->common.type != ACPI_TYPE_PACKAGE) {
+ return (AE_AML_OPERAND_TYPE);
+ }
+
+ /* Each sub-package must have the minimum length */
+
+ if ((*outer_elements)->package.count < expected_count) {
+ return (AE_AML_PACKAGE_LIMIT);
+ }
+
+ elements = (*outer_elements)->package.elements;
+ obj_desc = elements[sort_index];
+
+ if (obj_desc->common.type != ACPI_TYPE_INTEGER) {
+ return (AE_AML_OPERAND_TYPE);
+ }
+
+ /*
+ * The list must be sorted in the specified order. If we detect a
+ * discrepancy, issue a warning and sort the entire list
+ */
+ if (((sort_direction == ACPI_SORT_ASCENDING) &&
+ (obj_desc->integer.value < previous_value)) ||
+ ((sort_direction == ACPI_SORT_DESCENDING) &&
+ (obj_desc->integer.value > previous_value))) {
+ status =
+ acpi_ns_sort_list(return_object->package.elements,
+ outer_element_count, sort_index,
+ sort_direction);
+ if (ACPI_FAILURE(status)) {
+ return (status);
+ }
+
+ data->flags |= ACPI_OBJECT_REPAIRED;
+
+ ACPI_INFO_PREDEFINED((AE_INFO, data->pathname,
+ data->node_flags,
+ "Repaired unsorted list - now sorted by %s",
+ sort_key_name));
+ return (AE_OK);
+ }
+
+ previous_value = (u32) obj_desc->integer.value;
+ outer_elements++;
+ }
+
+ return (AE_OK);
+}
+
+/******************************************************************************
+ *
+ * FUNCTION: acpi_ns_remove_null_elements
+ *
+ * PARAMETERS: obj_desc - A Package object
+ *
+ * RETURN: Status. AE_NULL_ENTRY means that one or more elements were
+ * removed.
+ *
+ * DESCRIPTION: Remove all NULL package elements and update the package count.
+ *
+ *****************************************************************************/
+
+static acpi_status
+acpi_ns_remove_null_elements(union acpi_operand_object *obj_desc)
+{
+ union acpi_operand_object **source;
+ union acpi_operand_object **dest;
+ acpi_status status = AE_OK;
+ u32 count;
+ u32 new_count;
+ u32 i;
+
+ count = obj_desc->package.count;
+ new_count = count;
+
+ source = obj_desc->package.elements;
+ dest = source;
+
+ /* Examine all elements of the package object */
+
+ for (i = 0; i < count; i++) {
+ if (!*source) {
+ status = AE_NULL_ENTRY;
+ new_count--;
+ } else {
+ *dest = *source;
+ dest++;
+ }
+ source++;
+ }
+
+ if (status == AE_NULL_ENTRY) {
+
+ /* NULL terminate list and update the package count */
+
+ *dest = NULL;
+ obj_desc->package.count = new_count;
+ }
+
+ return (status);
+}
+
+/******************************************************************************
+ *
+ * FUNCTION: acpi_ns_sort_list
+ *
+ * PARAMETERS: Elements - Package object element list
+ * Count - Element count for above
+ * Index - Sort by which package element
+ * sort_direction - Ascending or Descending sort
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Sort the objects that are in a package element list.
+ *
+ * NOTE: Assumes that all NULL elements have been removed from the package.
+ *
+ *****************************************************************************/
+
+static acpi_status
+acpi_ns_sort_list(union acpi_operand_object **elements,
+ u32 count, u32 index, u8 sort_direction)
+{
+ union acpi_operand_object *obj_desc1;
+ union acpi_operand_object *obj_desc2;
+ union acpi_operand_object *temp_obj;
+ u32 i;
+ u32 j;
+
+ /* Simple bubble sort */
+
+ for (i = 1; i < count; i++) {
+ for (j = (count - 1); j >= i; j--) {
+ obj_desc1 = elements[j - 1]->package.elements[index];
+ obj_desc2 = elements[j]->package.elements[index];
+
+ if (((sort_direction == ACPI_SORT_ASCENDING) &&
+ (obj_desc1->integer.value >
+ obj_desc2->integer.value))
+ || ((sort_direction == ACPI_SORT_DESCENDING)
+ && (obj_desc1->integer.value <
+ obj_desc2->integer.value))) {
+ temp_obj = elements[j - 1];
+ elements[j - 1] = elements[j];
+ elements[j] = temp_obj;
+ }
+ }
+ }
+
+ return (AE_OK);
+}
diff --git a/drivers/acpi/acpica/nswalk.c b/drivers/acpi/acpica/nswalk.c
index 35539df..d7e6b52 100644
--- a/drivers/acpi/acpica/nswalk.c
+++ b/drivers/acpi/acpica/nswalk.c
@@ -165,24 +165,27 @@
* max_depth - Depth to which search is to reach
* Flags - Whether to unlock the NS before invoking
* the callback routine
- * user_function - Called when an object of "Type" is found
- * Context - Passed to user function
- * return_value - from the user_function if terminated early.
- * Otherwise, returns NULL.
+ * pre_order_visit - Called during tree pre-order visit
+ * when an object of "Type" is found
+ * post_order_visit - Called during tree post-order visit
+ * when an object of "Type" is found
+ * Context - Passed to user function(s) above
+ * return_value - from the user_function if terminated
+ * early. Otherwise, returns NULL.
* RETURNS: Status
*
* DESCRIPTION: Performs a modified depth-first walk of the namespace tree,
* starting (and ending) at the node specified by start_handle.
- * The user_function is called whenever a node that matches
- * the type parameter is found. If the user function returns
+ * The callback function is called whenever a node that matches
+ * the type parameter is found. If the callback function returns
* a non-zero value, the search is terminated immediately and
* this value is returned to the caller.
*
* The point of this procedure is to provide a generic namespace
* walk routine that can be called from multiple places to
- * provide multiple services; the User Function can be tailored
- * to each task, whether it is a print function, a compare
- * function, etc.
+ * provide multiple services; the callback function(s) can be
+ * tailored to each task, whether it is a print function,
+ * a compare function, etc.
*
******************************************************************************/
@@ -191,7 +194,8 @@
acpi_handle start_node,
u32 max_depth,
u32 flags,
- acpi_walk_callback user_function,
+ acpi_walk_callback pre_order_visit,
+ acpi_walk_callback post_order_visit,
void *context, void **return_value)
{
acpi_status status;
@@ -200,6 +204,7 @@
struct acpi_namespace_node *parent_node;
acpi_object_type child_type;
u32 level;
+ u8 node_previously_visited = FALSE;
ACPI_FUNCTION_TRACE(ns_walk_namespace);
@@ -212,7 +217,7 @@
/* Null child means "get first node" */
parent_node = start_node;
- child_node = NULL;
+ child_node = acpi_ns_get_next_node(parent_node, NULL);
child_type = ACPI_TYPE_ANY;
level = 1;
@@ -221,102 +226,129 @@
* started. When Level is zero, the loop is done because we have
* bubbled up to (and passed) the original parent handle (start_entry)
*/
- while (level > 0) {
-
- /* Get the next node in this scope. Null if not found */
-
+ while (level > 0 && child_node) {
status = AE_OK;
+
+ /* Found next child, get the type if we are not searching for ANY */
+
+ if (type != ACPI_TYPE_ANY) {
+ child_type = child_node->type;
+ }
+
+ /*
+ * Ignore all temporary namespace nodes (created during control
+ * method execution) unless told otherwise. These temporary nodes
+ * can cause a race condition because they can be deleted during
+ * the execution of the user function (if the namespace is
+ * unlocked before invocation of the user function.) Only the
+ * debugger namespace dump will examine the temporary nodes.
+ */
+ if ((child_node->flags & ANOBJ_TEMPORARY) &&
+ !(flags & ACPI_NS_WALK_TEMP_NODES)) {
+ status = AE_CTRL_DEPTH;
+ }
+
+ /* Type must match requested type */
+
+ else if (child_type == type) {
+ /*
+ * Found a matching node, invoke the user callback function.
+ * Unlock the namespace if flag is set.
+ */
+ if (flags & ACPI_NS_WALK_UNLOCK) {
+ mutex_status =
+ acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
+ if (ACPI_FAILURE(mutex_status)) {
+ return_ACPI_STATUS(mutex_status);
+ }
+ }
+
+ /*
+ * Invoke the user function, either pre-order or post-order
+ * or both.
+ */
+ if (!node_previously_visited) {
+ if (pre_order_visit) {
+ status =
+ pre_order_visit(child_node, level,
+ context,
+ return_value);
+ }
+ } else {
+ if (post_order_visit) {
+ status =
+ post_order_visit(child_node, level,
+ context,
+ return_value);
+ }
+ }
+
+ if (flags & ACPI_NS_WALK_UNLOCK) {
+ mutex_status =
+ acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
+ if (ACPI_FAILURE(mutex_status)) {
+ return_ACPI_STATUS(mutex_status);
+ }
+ }
+
+ switch (status) {
+ case AE_OK:
+ case AE_CTRL_DEPTH:
+
+ /* Just keep going */
+ break;
+
+ case AE_CTRL_TERMINATE:
+
+ /* Exit now, with OK status */
+
+ return_ACPI_STATUS(AE_OK);
+
+ default:
+
+ /* All others are valid exceptions */
+
+ return_ACPI_STATUS(status);
+ }
+ }
+
+ /*
+ * Depth first search: Attempt to go down another level in the
+ * namespace if we are allowed to. Don't go any further if we have
+ * reached the caller specified maximum depth or if the user
+ * function has specified that the maximum depth has been reached.
+ */
+ if (!node_previously_visited &&
+ (level < max_depth) && (status != AE_CTRL_DEPTH)) {
+ if (child_node->child) {
+
+ /* There is at least one child of this node, visit it */
+
+ level++;
+ parent_node = child_node;
+ child_node =
+ acpi_ns_get_next_node(parent_node, NULL);
+ continue;
+ }
+ }
+
+ /* No more children, re-visit this node */
+
+ if (!node_previously_visited) {
+ node_previously_visited = TRUE;
+ continue;
+ }
+
+ /* No more children, visit peers */
+
child_node = acpi_ns_get_next_node(parent_node, child_node);
if (child_node) {
+ node_previously_visited = FALSE;
+ }
- /* Found next child, get the type if we are not searching for ANY */
+ /* No peers, re-visit parent */
- if (type != ACPI_TYPE_ANY) {
- child_type = child_node->type;
- }
-
- /*
- * Ignore all temporary namespace nodes (created during control
- * method execution) unless told otherwise. These temporary nodes
- * can cause a race condition because they can be deleted during
- * the execution of the user function (if the namespace is
- * unlocked before invocation of the user function.) Only the
- * debugger namespace dump will examine the temporary nodes.
- */
- if ((child_node->flags & ANOBJ_TEMPORARY) &&
- !(flags & ACPI_NS_WALK_TEMP_NODES)) {
- status = AE_CTRL_DEPTH;
- }
-
- /* Type must match requested type */
-
- else if (child_type == type) {
- /*
- * Found a matching node, invoke the user callback function.
- * Unlock the namespace if flag is set.
- */
- if (flags & ACPI_NS_WALK_UNLOCK) {
- mutex_status =
- acpi_ut_release_mutex
- (ACPI_MTX_NAMESPACE);
- if (ACPI_FAILURE(mutex_status)) {
- return_ACPI_STATUS
- (mutex_status);
- }
- }
-
- status =
- user_function(child_node, level, context,
- return_value);
-
- if (flags & ACPI_NS_WALK_UNLOCK) {
- mutex_status =
- acpi_ut_acquire_mutex
- (ACPI_MTX_NAMESPACE);
- if (ACPI_FAILURE(mutex_status)) {
- return_ACPI_STATUS
- (mutex_status);
- }
- }
-
- switch (status) {
- case AE_OK:
- case AE_CTRL_DEPTH:
-
- /* Just keep going */
- break;
-
- case AE_CTRL_TERMINATE:
-
- /* Exit now, with OK status */
-
- return_ACPI_STATUS(AE_OK);
-
- default:
-
- /* All others are valid exceptions */
-
- return_ACPI_STATUS(status);
- }
- }
-
- /*
- * Depth first search: Attempt to go down another level in the
- * namespace if we are allowed to. Don't go any further if we have
- * reached the caller specified maximum depth or if the user
- * function has specified that the maximum depth has been reached.
- */
- if ((level < max_depth) && (status != AE_CTRL_DEPTH)) {
- if (child_node->child) {
-
- /* There is at least one child of this node, visit it */
-
- level++;
- parent_node = child_node;
- child_node = NULL;
- }
- }
- } else {
+ else {
/*
* No more children of this node (acpi_ns_get_next_node failed), go
* back upwards in the namespace tree to the node's parent.
@@ -324,6 +356,8 @@
level--;
child_node = parent_node;
parent_node = acpi_ns_get_parent_node(parent_node);
+
+ node_previously_visited = TRUE;
}
}
diff --git a/drivers/acpi/acpica/nsxfeval.c b/drivers/acpi/acpica/nsxfeval.c
index 4929dbd..f2bd1da 100644
--- a/drivers/acpi/acpica/nsxfeval.c
+++ b/drivers/acpi/acpica/nsxfeval.c
@@ -433,8 +433,11 @@
* PARAMETERS: Type - acpi_object_type to search for
* start_object - Handle in namespace where search begins
* max_depth - Depth to which search is to reach
- * user_function - Called when an object of "Type" is found
- * Context - Passed to user function
+ * pre_order_visit - Called during tree pre-order visit
+ * when an object of "Type" is found
+ * post_order_visit - Called during tree post-order visit
+ * when an object of "Type" is found
+ * Context - Passed to user function(s) above
* return_value - Location where return value of
* user_function is put if terminated early
*
@@ -443,16 +446,16 @@
*
* DESCRIPTION: Performs a modified depth-first walk of the namespace tree,
* starting (and ending) at the object specified by start_handle.
- * The user_function is called whenever an object that matches
- * the type parameter is found. If the user function returns
+ * The callback function is called whenever an object that matches
+ * the type parameter is found. If the callback function returns
* a non-zero value, the search is terminated immediately and this
* value is returned to the caller.
*
* The point of this procedure is to provide a generic namespace
* walk routine that can be called from multiple places to
- * provide multiple services; the User Function can be tailored
- * to each task, whether it is a print function, a compare
- * function, etc.
+ * provide multiple services; the callback function(s) can be
+ * tailored to each task, whether it is a print function,
+ * a compare function, etc.
*
******************************************************************************/
@@ -460,7 +463,8 @@
acpi_walk_namespace(acpi_object_type type,
acpi_handle start_object,
u32 max_depth,
- acpi_walk_callback user_function,
+ acpi_walk_callback pre_order_visit,
+ acpi_walk_callback post_order_visit,
void *context, void **return_value)
{
acpi_status status;
@@ -469,7 +473,8 @@
/* Parameter validation */
- if ((type > ACPI_TYPE_LOCAL_MAX) || (!max_depth) || (!user_function)) {
+ if ((type > ACPI_TYPE_LOCAL_MAX) ||
+ (!max_depth) || (!pre_order_visit && !post_order_visit)) {
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
@@ -501,8 +506,9 @@
}
status = acpi_ns_walk_namespace(type, start_object, max_depth,
- ACPI_NS_WALK_UNLOCK, user_function,
- context, return_value);
+ ACPI_NS_WALK_UNLOCK, pre_order_visit,
+ post_order_visit, context,
+ return_value);
(void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
@@ -681,8 +687,8 @@
status = acpi_ns_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
ACPI_UINT32_MAX, ACPI_NS_WALK_UNLOCK,
- acpi_ns_get_device_callback, &info,
- return_value);
+ acpi_ns_get_device_callback, NULL,
+ &info, return_value);
(void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
return_ACPI_STATUS(status);
diff --git a/drivers/acpi/acpica/psloop.c b/drivers/acpi/acpica/psloop.c
index cd7995b..0988e4a 100644
--- a/drivers/acpi/acpica/psloop.c
+++ b/drivers/acpi/acpica/psloop.c
@@ -87,7 +87,8 @@
union acpi_parse_object *op, acpi_status status);
static void
-acpi_ps_link_module_code(u8 *aml_start, u32 aml_length, acpi_owner_id owner_id);
+acpi_ps_link_module_code(union acpi_parse_object *parent_op,
+ u8 *aml_start, u32 aml_length, acpi_owner_id owner_id);
/*******************************************************************************
*
@@ -479,11 +480,14 @@
*/
if (walk_state->pass_number ==
ACPI_IMODE_LOAD_PASS1) {
- acpi_ps_link_module_code(aml_op_start,
- walk_state->
+ acpi_ps_link_module_code(op->common.
+ parent,
+ aml_op_start,
+ (u32)
+ (walk_state->
parser_state.
pkg_end -
- aml_op_start,
+ aml_op_start),
walk_state->
owner_id);
}
@@ -598,7 +602,8 @@
*
* FUNCTION: acpi_ps_link_module_code
*
- * PARAMETERS: aml_start - Pointer to the AML
+ * PARAMETERS: parent_op - Parent parser op
+ * aml_start - Pointer to the AML
* aml_length - Length of executable AML
* owner_id - owner_id of module level code
*
@@ -611,11 +616,13 @@
******************************************************************************/
static void
-acpi_ps_link_module_code(u8 *aml_start, u32 aml_length, acpi_owner_id owner_id)
+acpi_ps_link_module_code(union acpi_parse_object *parent_op,
+ u8 *aml_start, u32 aml_length, acpi_owner_id owner_id)
{
union acpi_operand_object *prev;
union acpi_operand_object *next;
union acpi_operand_object *method_obj;
+ struct acpi_namespace_node *parent_node;
/* Get the tail of the list */
@@ -639,11 +646,24 @@
return;
}
+ if (parent_op->common.node) {
+ parent_node = parent_op->common.node;
+ } else {
+ parent_node = acpi_gbl_root_node;
+ }
+
method_obj->method.aml_start = aml_start;
method_obj->method.aml_length = aml_length;
method_obj->method.owner_id = owner_id;
method_obj->method.flags |= AOPOBJ_MODULE_LEVEL;
+ /*
+ * Save the parent node in next_object. This is cheating, but we
+ * don't want to expand the method object.
+ */
+ method_obj->method.next_object =
+ ACPI_CAST_PTR(union acpi_operand_object, parent_node);
+
if (!prev) {
acpi_gbl_module_code_list = method_obj;
} else {
diff --git a/drivers/acpi/acpica/psparse.c b/drivers/acpi/acpica/psparse.c
index 70838e9..4df8f13 100644
--- a/drivers/acpi/acpica/psparse.c
+++ b/drivers/acpi/acpica/psparse.c
@@ -610,17 +610,13 @@
implicit_return_obj) {
previous_walk_state->
implicit_return_obj =
- acpi_ut_create_internal_object
- (ACPI_TYPE_INTEGER);
+ acpi_ut_create_integer_object
+ ((u64) 0);
if (!previous_walk_state->
implicit_return_obj) {
return_ACPI_STATUS
(AE_NO_MEMORY);
}
-
- previous_walk_state->
- implicit_return_obj->
- integer.value = 0;
}
/* Restart the calling control method */
diff --git a/drivers/acpi/acpica/psxface.c b/drivers/acpi/acpica/psxface.c
index dd9731c..12934ad 100644
--- a/drivers/acpi/acpica/psxface.c
+++ b/drivers/acpi/acpica/psxface.c
@@ -306,14 +306,12 @@
*/
if (acpi_gbl_enable_interpreter_slack) {
walk_state->implicit_return_obj =
- acpi_ut_create_internal_object(ACPI_TYPE_INTEGER);
+ acpi_ut_create_integer_object((u64) 0);
if (!walk_state->implicit_return_obj) {
status = AE_NO_MEMORY;
acpi_ds_delete_walk_state(walk_state);
goto cleanup;
}
-
- walk_state->implicit_return_obj->integer.value = 0;
}
/* Parse the AML */
diff --git a/drivers/acpi/acpica/utmisc.c b/drivers/acpi/acpica/utmisc.c
index 61f6315..6c6a513 100644
--- a/drivers/acpi/acpica/utmisc.c
+++ b/drivers/acpi/acpica/utmisc.c
@@ -1161,3 +1161,45 @@
ACPI_COMMON_MSG_SUFFIX;
va_end(args);
}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_predefined_info
+ *
+ * PARAMETERS: module_name - Caller's module name (for error output)
+ * line_number - Caller's line number (for error output)
+ * Pathname - Full pathname to the node
+ * node_flags - From Namespace node for the method/object
+ * Format - Printf format string + additional args
+ *
+ * RETURN: None
+ *
+ * DESCRIPTION: Info messages for the predefined validation module. Messages
+ * are only emitted the first time a problem with a particular
+ * method/object is detected. This prevents a flood of
+ * messages for methods that are repeatedly evaluated.
+ *
+ ******************************************************************************/
+
+void ACPI_INTERNAL_VAR_XFACE
+acpi_ut_predefined_info(const char *module_name,
+ u32 line_number,
+ char *pathname, u8 node_flags, const char *format, ...)
+{
+ va_list args;
+
+ /*
+ * Warning messages for this method/object will be disabled after the
+ * first time a validation fails or an object is successfully repaired.
+ */
+ if (node_flags & ANOBJ_EVALUATED) {
+ return;
+ }
+
+ acpi_os_printf("ACPI Info for %s: ", pathname);
+
+ va_start(args, format);
+ acpi_os_vprintf(format, args);
+ ACPI_COMMON_MSG_SUFFIX;
+ va_end(args);
+}
diff --git a/drivers/acpi/acpica/utobject.c b/drivers/acpi/acpica/utobject.c
index 0207b62..42e658b 100644
--- a/drivers/acpi/acpica/utobject.c
+++ b/drivers/acpi/acpica/utobject.c
@@ -190,6 +190,35 @@
/*******************************************************************************
*
+ * FUNCTION: acpi_ut_create_integer_object
+ *
+ * PARAMETERS: initial_value - Initial value for the integer
+ *
+ * RETURN: Pointer to a new Integer object, null on failure
+ *
+ * DESCRIPTION: Create an initialized integer object
+ *
+ ******************************************************************************/
+
+union acpi_operand_object *acpi_ut_create_integer_object(u64 initial_value)
+{
+ union acpi_operand_object *integer_desc;
+
+ ACPI_FUNCTION_TRACE(ut_create_integer_object);
+
+ /* Create and initialize a new integer object */
+
+ integer_desc = acpi_ut_create_internal_object(ACPI_TYPE_INTEGER);
+ if (!integer_desc) {
+ return_PTR(NULL);
+ }
+
+ integer_desc->integer.value = initial_value;
+ return_PTR(integer_desc);
+}
+
+/*******************************************************************************
+ *
* FUNCTION: acpi_ut_create_buffer_object
*
* PARAMETERS: buffer_size - Size of buffer to be created
diff --git a/drivers/acpi/container.c b/drivers/acpi/container.c
index 642bb30..5faf6c2 100644
--- a/drivers/acpi/container.c
+++ b/drivers/acpi/container.c
@@ -258,7 +258,7 @@
acpi_walk_namespace(ACPI_TYPE_DEVICE,
ACPI_ROOT_OBJECT,
ACPI_UINT32_MAX,
- container_walk_namespace_cb, &action, NULL);
+ container_walk_namespace_cb, NULL, &action, NULL);
return (0);
}
@@ -271,7 +271,7 @@
acpi_walk_namespace(ACPI_TYPE_DEVICE,
ACPI_ROOT_OBJECT,
ACPI_UINT32_MAX,
- container_walk_namespace_cb, &action, NULL);
+ container_walk_namespace_cb, NULL, &action, NULL);
acpi_bus_unregister_driver(&acpi_container_driver);
diff --git a/drivers/acpi/dock.c b/drivers/acpi/dock.c
index 7338b6a..30be3c1 100644
--- a/drivers/acpi/dock.c
+++ b/drivers/acpi/dock.c
@@ -1030,8 +1030,8 @@
/* Find dependent devices */
acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
- ACPI_UINT32_MAX, find_dock_devices, dock_station,
- NULL);
+ ACPI_UINT32_MAX, find_dock_devices, NULL,
+ dock_station, NULL);
/* add the dock station as a device dependent on itself */
dd = alloc_dock_dependent_device(handle);
@@ -1127,11 +1127,11 @@
/* look for a dock station */
acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
- ACPI_UINT32_MAX, find_dock, NULL, NULL);
+ ACPI_UINT32_MAX, find_dock, NULL, NULL, NULL);
/* look for bay */
acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
- ACPI_UINT32_MAX, find_bay, NULL, NULL);
+ ACPI_UINT32_MAX, find_bay, NULL, NULL, NULL);
if (!dock_station_count) {
printk(KERN_INFO PREFIX "No dock devices found.\n");
return 0;
diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index baef28c..75b147f 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -820,7 +820,7 @@
/* Find and register all query methods */
acpi_walk_namespace(ACPI_TYPE_METHOD, ec->handle, 1,
- acpi_ec_register_query_methods, ec, NULL);
+ acpi_ec_register_query_methods, NULL, ec, NULL);
if (!first_ec)
first_ec = ec;
diff --git a/drivers/acpi/glue.c b/drivers/acpi/glue.c
index c6645f2..4c8fcff 100644
--- a/drivers/acpi/glue.c
+++ b/drivers/acpi/glue.c
@@ -113,7 +113,7 @@
if (!parent)
return NULL;
acpi_walk_namespace(ACPI_TYPE_DEVICE, parent,
- 1, do_acpi_find_child, &find, NULL);
+ 1, do_acpi_find_child, NULL, &find, NULL);
return find.handle;
}
diff --git a/drivers/acpi/pci_slot.c b/drivers/acpi/pci_slot.c
index 45da2ba..11f2197 100644
--- a/drivers/acpi/pci_slot.c
+++ b/drivers/acpi/pci_slot.c
@@ -219,12 +219,12 @@
dbg("p2p bridge walk, pci_bus = %x\n", dev->subordinate->number);
status = acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, (u32)1,
- user_function, &child_context, NULL);
+ user_function, NULL, &child_context, NULL);
if (ACPI_FAILURE(status))
goto out;
status = acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, (u32)1,
- walk_p2p_bridge, &child_context, NULL);
+ walk_p2p_bridge, NULL, &child_context, NULL);
out:
pci_dev_put(dev);
return AE_OK;
@@ -277,12 +277,12 @@
dbg("root bridge walk, pci_bus = %x\n", pci_bus->number);
status = acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, (u32)1,
- user_function, &context, NULL);
+ user_function, NULL, &context, NULL);
if (ACPI_FAILURE(status))
return status;
status = acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, (u32)1,
- walk_p2p_bridge, &context, NULL);
+ walk_p2p_bridge, NULL, &context, NULL);
if (ACPI_FAILURE(status))
err("%s: walk_p2p_bridge failure - %d\n", __func__, status);
diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c
index ec742a4..cb4283f 100644
--- a/drivers/acpi/processor_core.c
+++ b/drivers/acpi/processor_core.c
@@ -1102,7 +1102,7 @@
acpi_walk_namespace(ACPI_TYPE_PROCESSOR,
ACPI_ROOT_OBJECT,
ACPI_UINT32_MAX,
- processor_walk_namespace_cb, &action, NULL);
+ processor_walk_namespace_cb, NULL, &action, NULL);
#endif
register_hotcpu_notifier(&acpi_cpu_notifier);
}
@@ -1115,7 +1115,7 @@
acpi_walk_namespace(ACPI_TYPE_PROCESSOR,
ACPI_ROOT_OBJECT,
ACPI_UINT32_MAX,
- processor_walk_namespace_cb, &action, NULL);
+ processor_walk_namespace_cb, NULL, &action, NULL);
#endif
unregister_hotcpu_notifier(&acpi_cpu_notifier);
}
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index 14a7481..ff9f622 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -1332,7 +1332,7 @@
status = acpi_bus_check_add(handle, 0, ops, &device);
if (ACPI_SUCCESS(status))
acpi_walk_namespace(ACPI_TYPE_ANY, handle, ACPI_UINT32_MAX,
- acpi_bus_check_add, ops, &device);
+ acpi_bus_check_add, NULL, ops, &device);
if (child)
*child = device;
diff --git a/drivers/acpi/video_detect.c b/drivers/acpi/video_detect.c
index 575593a..fc2f26b 100644
--- a/drivers/acpi/video_detect.c
+++ b/drivers/acpi/video_detect.c
@@ -7,7 +7,7 @@
* video_detect.c:
* Provides acpi_is_video_device() for early scanning of ACPI devices in scan.c
* There a Linux specific (Spec does not provide a HID for video devices) is
- * assinged
+ * assigned
*
* After PCI devices are glued with ACPI devices
* acpi_get_pci_dev() can be called to identify ACPI graphics
@@ -83,16 +83,16 @@
if (!device)
return 0;
- /* Does this device able to support video switching ? */
+ /* Is this device able to support video switching ? */
if (ACPI_SUCCESS(acpi_get_handle(device->handle, "_DOD", &h_dummy)) ||
ACPI_SUCCESS(acpi_get_handle(device->handle, "_DOS", &h_dummy)))
video_caps |= ACPI_VIDEO_OUTPUT_SWITCHING;
- /* Does this device able to retrieve a video ROM ? */
+ /* Is this device able to retrieve a video ROM ? */
if (ACPI_SUCCESS(acpi_get_handle(device->handle, "_ROM", &h_dummy)))
video_caps |= ACPI_VIDEO_ROM_AVAILABLE;
- /* Does this device able to configure which video head to be POSTed ? */
+ /* Is this device able to configure which video head to be POSTed ? */
if (ACPI_SUCCESS(acpi_get_handle(device->handle, "_VPO", &h_dummy)) &&
ACPI_SUCCESS(acpi_get_handle(device->handle, "_GPD", &h_dummy)) &&
ACPI_SUCCESS(acpi_get_handle(device->handle, "_SPD", &h_dummy)))
@@ -101,7 +101,7 @@
/* Only check for backlight functionality if one of the above hit. */
if (video_caps)
acpi_walk_namespace(ACPI_TYPE_DEVICE, device->handle,
- ACPI_UINT32_MAX, acpi_backlight_cap_match,
+ ACPI_UINT32_MAX, acpi_backlight_cap_match, NULL,
&video_caps, NULL);
return video_caps;
@@ -137,7 +137,7 @@
*
* if NULL is passed as argument all ACPI devices are enumerated and
* all graphics capabilities of physically present devices are
- * summerized and returned. This is cached and done only once.
+ * summarized and returned. This is cached and done only once.
*/
long acpi_video_get_capabilities(acpi_handle graphics_handle)
{
@@ -151,7 +151,7 @@
if (!graphics_handle) {
/* Only do the global walk through all graphics devices once */
acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
- ACPI_UINT32_MAX, find_video,
+ ACPI_UINT32_MAX, find_video, NULL,
&caps, NULL);
/* There might be boot param flags set already... */
acpi_video_support |= caps;
@@ -173,7 +173,7 @@
return 0;
}
acpi_walk_namespace(ACPI_TYPE_DEVICE, graphics_handle,
- ACPI_UINT32_MAX, find_video,
+ ACPI_UINT32_MAX, find_video, NULL,
&caps, NULL);
}
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "We have 0x%lX video support %s %s\n",
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index 0c6155f..19136a7 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -599,7 +599,7 @@
{ 0x27DF, 0x1028, 0x02b0 }, /* ICH7 on unknown Dell */
{ 0x27DF, 0x1043, 0x1267 }, /* ICH7 on Asus W5F */
{ 0x27DF, 0x103C, 0x30A1 }, /* ICH7 on HP Compaq nc2400 */
- { 0x27DF, 0x103C, 0x361a }, /* ICH7 on unkown HP */
+ { 0x27DF, 0x103C, 0x361a }, /* ICH7 on unknown HP */
{ 0x27DF, 0x1071, 0xD221 }, /* ICH7 on Hercules EC-900 */
{ 0x27DF, 0x152D, 0x0778 }, /* ICH7 on unknown Intel */
{ 0x24CA, 0x1025, 0x0061 }, /* ICH4 on ACER Aspire 2023WLMi */
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 62e6b9e..1683ebd 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -1208,6 +1208,7 @@
* ata_scsi_change_queue_depth - SCSI callback for queue depth config
* @sdev: SCSI device to configure queue depth for
* @queue_depth: new queue depth
+ * @reason: calling context
*
* This is libata standard hostt->change_queue_depth callback.
* SCSI will call into this callback when user tries to set queue
@@ -1219,12 +1220,16 @@
* RETURNS:
* Newly configured queue depth.
*/
-int ata_scsi_change_queue_depth(struct scsi_device *sdev, int queue_depth)
+int ata_scsi_change_queue_depth(struct scsi_device *sdev, int queue_depth,
+ int reason)
{
struct ata_port *ap = ata_shost_to_port(sdev->host);
struct ata_device *dev;
unsigned long flags;
+ if (reason != SCSI_QDEPTH_DEFAULT)
+ return -EOPNOTSUPP;
+
if (queue_depth < 1 || queue_depth == sdev->queue_depth)
return sdev->queue_depth;
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 51eb1e2..efa8773 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -736,7 +736,7 @@
/*
* Use io*16_rep() accessors here as well to avoid pointlessly
- * swapping bytes to and fro on the big endian machines...
+ * swapping bytes to and from on the big endian machines...
*/
if (rw == READ) {
ioread16_rep(data_addr, pad, 1);
@@ -776,7 +776,7 @@
void __iomem *data_addr = ap->ioaddr.data_addr;
unsigned int words = buflen >> 2;
int slop = buflen & 3;
-
+
if (!(ap->pflags & ATA_PFLAG_PIO32))
return ata_sff_data_xfer(dev, buf, buflen, rw);
@@ -795,7 +795,7 @@
/*
* Use io*_rep() accessors here as well to avoid pointlessly
- * swapping bytes to and fro on the big endian machines...
+ * swapping bytes to and from on the big endian machines...
*/
if (rw == READ) {
if (slop < 3)
diff --git a/drivers/ata/pata_cs5535.c b/drivers/ata/pata_cs5535.c
index 403f561..71cef9a 100644
--- a/drivers/ata/pata_cs5535.c
+++ b/drivers/ata/pata_cs5535.c
@@ -4,7 +4,7 @@
* Alan Cox <alan@lxorguk.ukuu.org.uk>
*
* based upon cs5535.c from AMD <Jens.Altmann@amd.com> as cleaned up and
- * made readable and Linux style by Wolfgang Zuleger <wolfgang.zuleger@gmx.de
+ * made readable and Linux style by Wolfgang Zuleger <wolfgang.zuleger@gmx.de>
* and Alexander Kiausch <alex.kiausch@t-online.de>
*
* This program is free software; you can redistribute it and/or modify
diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c
index 8a5d35b..ce4136e 100644
--- a/drivers/ata/sata_fsl.c
+++ b/drivers/ata/sata_fsl.c
@@ -43,9 +43,9 @@
/*
* SATA-FSL host controller supports a max. of (15+1) direct PRDEs, and
* chained indirect PRDEs upto a max count of 63.
- * We are allocating an array of 63 PRDEs contigiously, but PRDE#15 will
+ * We are allocating an array of 63 PRDEs contiguously, but PRDE#15 will
* be setup as an indirect descriptor, pointing to it's next
- * (contigious) PRDE. Though chained indirect PRDE arrays are
+ * (contiguous) PRDE. Though chained indirect PRDE arrays are
* supported,it will be more efficient to use a direct PRDT and
* a single chain/link to indirect PRDE array/PRDT.
*/
@@ -314,7 +314,7 @@
u32 ttl_dwords = 0;
/*
- * NOTE : direct & indirect prdt's are contigiously allocated
+ * NOTE : direct & indirect prdt's are contiguously allocated
*/
struct prde *prd = (struct prde *)&((struct command_desc *)
cmd_desc)->prdt;
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index 1eb4e02..0c82d33 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -1975,7 +1975,7 @@
ata_id_c_string(dev->id, model_num, ATA_ID_PROD, sizeof(model_num));
if (strncmp(model_num, "Maxtor", 6) == 0) {
- ata_scsi_change_queue_depth(sdev, 1);
+ ata_scsi_change_queue_depth(sdev, 1, SCSI_QDEPTH_DEFAULT);
ata_dev_printk(dev, KERN_NOTICE,
"Disabling SWNCQ mode (depth %x)\n", sdev->queue_depth);
}
diff --git a/drivers/atm/iphase.c b/drivers/atm/iphase.c
index b2c1b37..f734b34 100644
--- a/drivers/atm/iphase.c
+++ b/drivers/atm/iphase.c
@@ -1132,7 +1132,7 @@
IF_ERR(printk(" cause: packet time out\n");)
}
else {
- IF_ERR(printk(" cause: buffer over flow\n");)
+ IF_ERR(printk(" cause: buffer overflow\n");)
}
goto out_free_desc;
}
diff --git a/drivers/base/dd.c b/drivers/base/dd.c
index 979d159..ee95c76 100644
--- a/drivers/base/dd.c
+++ b/drivers/base/dd.c
@@ -188,7 +188,7 @@
* @dev: device to try to bind to the driver
*
* This function returns -ENODEV if the device is not registered,
- * 1 if the device is bound sucessfully and 0 otherwise.
+ * 1 if the device is bound successfully and 0 otherwise.
*
* This function must be called with @dev->sem held. When called for a
* USB interface, @dev->parent->sem must be held as well.
diff --git a/drivers/block/ataflop.c b/drivers/block/ataflop.c
index 847a9e5..a5af1d6 100644
--- a/drivers/block/ataflop.c
+++ b/drivers/block/ataflop.c
@@ -1478,10 +1478,7 @@
stdma_lock(floppy_irq, NULL);
atari_disable_irq( IRQ_MFP_FDC );
- local_save_flags(flags); /* The request function is called with ints
- local_irq_disable(); * disabled... so must save the IPL for later */
redo_fd_request();
- local_irq_restore(flags);
atari_enable_irq( IRQ_MFP_FDC );
}
diff --git a/drivers/block/cciss_cmd.h b/drivers/block/cciss_cmd.h
index b50a9b2..6afa700 100644
--- a/drivers/block/cciss_cmd.h
+++ b/drivers/block/cciss_cmd.h
@@ -5,7 +5,7 @@
//###########################################################################
#define CISS_VERSION "1.00"
-//general boundary defintions
+//general boundary definitions
#define SENSEINFOBYTES 32//note that this value may vary between host implementations
#define MAXSGENTRIES 32
#define CCISS_SG_CHAIN 0x80000000
diff --git a/drivers/bluetooth/btmrvl_sdio.c b/drivers/bluetooth/btmrvl_sdio.c
index 1e6eb1a..f36defa 100644
--- a/drivers/bluetooth/btmrvl_sdio.c
+++ b/drivers/bluetooth/btmrvl_sdio.c
@@ -535,7 +535,7 @@
break;
default:
- BT_ERR("Unknow packet type:%d", type);
+ BT_ERR("Unknown packet type:%d", type);
print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, payload,
blksz * buf_block_len);
diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c
index 4895f0e..aa09193 100644
--- a/drivers/bluetooth/hci_ldisc.c
+++ b/drivers/bluetooth/hci_ldisc.c
@@ -214,7 +214,7 @@
struct hci_uart *hu;
if (!hdev) {
- BT_ERR("Frame for uknown device (hdev=NULL)");
+ BT_ERR("Frame for unknown device (hdev=NULL)");
return -ENODEV;
}
diff --git a/drivers/cdrom/gdrom.c b/drivers/cdrom/gdrom.c
index a762283..e789e6c 100644
--- a/drivers/cdrom/gdrom.c
+++ b/drivers/cdrom/gdrom.c
@@ -214,7 +214,7 @@
gdrom_getsense(NULL);
return;
}
- outsw(PHYSADDR(GDROM_DATA_REG), cmd, 6);
+ outsw(GDROM_DATA_REG, cmd, 6);
}
@@ -298,7 +298,7 @@
err = -EINVAL;
goto cleanup_readtoc;
}
- insw(PHYSADDR(GDROM_DATA_REG), toc, tocsize/2);
+ insw(GDROM_DATA_REG, toc, tocsize/2);
if (gd.status & 0x01)
err = -EINVAL;
@@ -449,7 +449,7 @@
GDROM_DEFAULT_TIMEOUT);
if (gd.pending)
goto cleanup_sense;
- insw(PHYSADDR(GDROM_DATA_REG), &sense, sense_command->buflen/2);
+ insw(GDROM_DATA_REG, &sense, sense_command->buflen/2);
if (sense[1] & 40) {
printk(KERN_INFO "GDROM: Drive not ready - command aborted\n");
goto cleanup_sense;
@@ -586,7 +586,7 @@
spin_unlock(&gdrom_lock);
block = blk_rq_pos(req)/GD_TO_BLK + GD_SESSION_OFFSET;
block_cnt = blk_rq_sectors(req)/GD_TO_BLK;
- ctrl_outl(PHYSADDR(req->buffer), GDROM_DMA_STARTADDR_REG);
+ ctrl_outl(virt_to_phys(req->buffer), GDROM_DMA_STARTADDR_REG);
ctrl_outl(block_cnt * GDROM_HARD_SECTOR, GDROM_DMA_LENGTH_REG);
ctrl_outl(1, GDROM_DMA_DIRECTION_REG);
ctrl_outl(1, GDROM_DMA_ENABLE_REG);
@@ -615,7 +615,7 @@
cpu_relax();
gd.pending = 1;
gd.transfer = 1;
- outsw(PHYSADDR(GDROM_DATA_REG), &read_command->cmd, 6);
+ outsw(GDROM_DATA_REG, &read_command->cmd, 6);
timeout = jiffies + HZ / 2;
/* Wait for any pending DMA to finish */
while (ctrl_inb(GDROM_DMA_STATUS_REG) &&
diff --git a/drivers/char/agp/frontend.c b/drivers/char/agp/frontend.c
index a96f319..43412c0 100644
--- a/drivers/char/agp/frontend.c
+++ b/drivers/char/agp/frontend.c
@@ -676,25 +676,25 @@
int minor = iminor(inode);
struct agp_file_private *priv;
struct agp_client *client;
- int rc = -ENXIO;
-
- lock_kernel();
- mutex_lock(&(agp_fe.agp_mutex));
if (minor != AGPGART_MINOR)
- goto err_out;
+ return -ENXIO;
+
+ mutex_lock(&(agp_fe.agp_mutex));
priv = kzalloc(sizeof(struct agp_file_private), GFP_KERNEL);
- if (priv == NULL)
- goto err_out_nomem;
+ if (priv == NULL) {
+ mutex_unlock(&(agp_fe.agp_mutex));
+ return -ENOMEM;
+ }
set_bit(AGP_FF_ALLOW_CLIENT, &priv->access_flags);
priv->my_pid = current->pid;
- if (capable(CAP_SYS_RAWIO)) {
+ if (capable(CAP_SYS_RAWIO))
/* Root priv, can be controller */
set_bit(AGP_FF_ALLOW_CONTROLLER, &priv->access_flags);
- }
+
client = agp_find_client_by_pid(current->pid);
if (client != NULL) {
@@ -704,16 +704,10 @@
file->private_data = (void *) priv;
agp_insert_file_private(priv);
DBG("private=%p, client=%p", priv, client);
- mutex_unlock(&(agp_fe.agp_mutex));
- unlock_kernel();
- return 0;
-err_out_nomem:
- rc = -ENOMEM;
-err_out:
mutex_unlock(&(agp_fe.agp_mutex));
- unlock_kernel();
- return rc;
+
+ return 0;
}
diff --git a/drivers/char/cs5535_gpio.c b/drivers/char/cs5535_gpio.c
index 04ba906..4d830dc 100644
--- a/drivers/char/cs5535_gpio.c
+++ b/drivers/char/cs5535_gpio.c
@@ -17,7 +17,7 @@
#include <linux/cdev.h>
#include <linux/ioport.h>
#include <linux/pci.h>
-#include <linux/smp_lock.h>
+
#include <asm/uaccess.h>
#include <asm/io.h>
@@ -158,7 +158,6 @@
{
u32 m = iminor(inode);
- cycle_kernel_lock();
/* the mask says which pins are usable by this driver */
if ((mask & (1 << m)) == 0)
return -EINVAL;
diff --git a/drivers/char/efirtc.c b/drivers/char/efirtc.c
index 34d15d5..26a47dc 100644
--- a/drivers/char/efirtc.c
+++ b/drivers/char/efirtc.c
@@ -27,8 +27,6 @@
* - Add module support
*/
-
-#include <linux/smp_lock.h>
#include <linux/types.h>
#include <linux/errno.h>
#include <linux/miscdevice.h>
@@ -174,13 +172,12 @@
return -EINVAL;
case RTC_RD_TIME:
- lock_kernel();
spin_lock_irqsave(&efi_rtc_lock, flags);
status = efi.get_time(&eft, &cap);
spin_unlock_irqrestore(&efi_rtc_lock,flags);
- unlock_kernel();
+
if (status != EFI_SUCCESS) {
/* should never happen */
printk(KERN_ERR "efitime: can't read time\n");
@@ -202,13 +199,11 @@
convert_to_efi_time(&wtime, &eft);
- lock_kernel();
spin_lock_irqsave(&efi_rtc_lock, flags);
status = efi.set_time(&eft);
spin_unlock_irqrestore(&efi_rtc_lock,flags);
- unlock_kernel();
return status == EFI_SUCCESS ? 0 : -EINVAL;
@@ -224,7 +219,6 @@
convert_to_efi_time(&wtime, &eft);
- lock_kernel();
spin_lock_irqsave(&efi_rtc_lock, flags);
/*
* XXX Fixme:
@@ -235,19 +229,16 @@
status = efi.set_wakeup_time((efi_bool_t)enabled, &eft);
spin_unlock_irqrestore(&efi_rtc_lock,flags);
- unlock_kernel();
return status == EFI_SUCCESS ? 0 : -EINVAL;
case RTC_WKALM_RD:
- lock_kernel();
spin_lock_irqsave(&efi_rtc_lock, flags);
status = efi.get_wakeup_time((efi_bool_t *)&enabled, (efi_bool_t *)&pending, &eft);
spin_unlock_irqrestore(&efi_rtc_lock,flags);
- unlock_kernel();
if (status != EFI_SUCCESS) return -EINVAL;
@@ -277,7 +268,6 @@
* We do accept multiple open files at the same time as we
* synchronize on the per call operation.
*/
- cycle_kernel_lock();
return 0;
}
diff --git a/drivers/char/generic_nvram.c b/drivers/char/generic_nvram.c
index ef31738..fda4181 100644
--- a/drivers/char/generic_nvram.c
+++ b/drivers/char/generic_nvram.c
@@ -19,7 +19,6 @@
#include <linux/miscdevice.h>
#include <linux/fcntl.h>
#include <linux/init.h>
-#include <linux/smp_lock.h>
#include <asm/uaccess.h>
#include <asm/nvram.h>
#ifdef CONFIG_PPC_PMAC
@@ -32,7 +31,6 @@
static loff_t nvram_llseek(struct file *file, loff_t offset, int origin)
{
- lock_kernel();
switch (origin) {
case 1:
offset += file->f_pos;
@@ -41,12 +39,11 @@
offset += nvram_len;
break;
}
- if (offset < 0) {
- unlock_kernel();
+ if (offset < 0)
return -EINVAL;
- }
+
file->f_pos = offset;
- unlock_kernel();
+
return file->f_pos;
}
diff --git a/drivers/char/hw_random/core.c b/drivers/char/hw_random/core.c
index 8b7d56a..e989f67 100644
--- a/drivers/char/hw_random/core.c
+++ b/drivers/char/hw_random/core.c
@@ -76,7 +76,6 @@
return -EINVAL;
if (filp->f_mode & FMODE_WRITE)
return -EINVAL;
- cycle_kernel_lock();
return 0;
}
diff --git a/drivers/char/keyboard.c b/drivers/char/keyboard.c
index 950837c..5619007 100644
--- a/drivers/char/keyboard.c
+++ b/drivers/char/keyboard.c
@@ -46,8 +46,6 @@
extern void ctrl_alt_del(void);
-#define to_handle_h(n) container_of(n, struct input_handle, h_node)
-
/*
* Exported functions/variables
*/
@@ -132,6 +130,7 @@
*/
static struct input_handler kbd_handler;
+static DEFINE_SPINLOCK(kbd_event_lock);
static unsigned long key_down[BITS_TO_LONGS(KEY_CNT)]; /* keyboard key bitmap */
static unsigned char shift_down[NR_SHIFT]; /* shift state counters.. */
static int dead_key_next;
@@ -190,78 +189,85 @@
* etc.). So this means that scancodes for the extra function keys won't
* be valid for the first event device, but will be for the second.
*/
+
+struct getset_keycode_data {
+ unsigned int scancode;
+ unsigned int keycode;
+ int error;
+};
+
+static int getkeycode_helper(struct input_handle *handle, void *data)
+{
+ struct getset_keycode_data *d = data;
+
+ d->error = input_get_keycode(handle->dev, d->scancode, &d->keycode);
+
+ return d->error == 0; /* stop as soon as we successfully get one */
+}
+
int getkeycode(unsigned int scancode)
{
- struct input_handle *handle;
- int keycode;
- int error = -ENODEV;
+ struct getset_keycode_data d = { scancode, 0, -ENODEV };
- list_for_each_entry(handle, &kbd_handler.h_list, h_node) {
- error = input_get_keycode(handle->dev, scancode, &keycode);
- if (!error)
- return keycode;
- }
+ input_handler_for_each_handle(&kbd_handler, &d, getkeycode_helper);
- return error;
+ return d.error ?: d.keycode;
+}
+
+static int setkeycode_helper(struct input_handle *handle, void *data)
+{
+ struct getset_keycode_data *d = data;
+
+ d->error = input_set_keycode(handle->dev, d->scancode, d->keycode);
+
+ return d->error == 0; /* stop as soon as we successfully set one */
}
int setkeycode(unsigned int scancode, unsigned int keycode)
{
- struct input_handle *handle;
- int error = -ENODEV;
+ struct getset_keycode_data d = { scancode, keycode, -ENODEV };
- list_for_each_entry(handle, &kbd_handler.h_list, h_node) {
- error = input_set_keycode(handle->dev, scancode, keycode);
- if (!error)
- break;
- }
+ input_handler_for_each_handle(&kbd_handler, &d, setkeycode_helper);
- return error;
+ return d.error;
}
/*
* Making beeps and bells.
*/
+
+static int kd_sound_helper(struct input_handle *handle, void *data)
+{
+ unsigned int *hz = data;
+ struct input_dev *dev = handle->dev;
+
+ if (test_bit(EV_SND, dev->evbit)) {
+ if (test_bit(SND_TONE, dev->sndbit))
+ input_inject_event(handle, EV_SND, SND_TONE, *hz);
+ if (test_bit(SND_BELL, handle->dev->sndbit))
+ input_inject_event(handle, EV_SND, SND_BELL, *hz ? 1 : 0);
+ }
+
+ return 0;
+}
+
static void kd_nosound(unsigned long ignored)
{
- struct input_handle *handle;
+ static unsigned int zero;
- list_for_each_entry(handle, &kbd_handler.h_list, h_node) {
- if (test_bit(EV_SND, handle->dev->evbit)) {
- if (test_bit(SND_TONE, handle->dev->sndbit))
- input_inject_event(handle, EV_SND, SND_TONE, 0);
- if (test_bit(SND_BELL, handle->dev->sndbit))
- input_inject_event(handle, EV_SND, SND_BELL, 0);
- }
- }
+ input_handler_for_each_handle(&kbd_handler, &zero, kd_sound_helper);
}
static DEFINE_TIMER(kd_mksound_timer, kd_nosound, 0, 0);
void kd_mksound(unsigned int hz, unsigned int ticks)
{
- struct list_head *node;
+ del_timer_sync(&kd_mksound_timer);
- del_timer(&kd_mksound_timer);
+ input_handler_for_each_handle(&kbd_handler, &hz, kd_sound_helper);
- if (hz) {
- list_for_each_prev(node, &kbd_handler.h_list) {
- struct input_handle *handle = to_handle_h(node);
- if (test_bit(EV_SND, handle->dev->evbit)) {
- if (test_bit(SND_TONE, handle->dev->sndbit)) {
- input_inject_event(handle, EV_SND, SND_TONE, hz);
- break;
- }
- if (test_bit(SND_BELL, handle->dev->sndbit)) {
- input_inject_event(handle, EV_SND, SND_BELL, 1);
- break;
- }
- }
- }
- if (ticks)
- mod_timer(&kd_mksound_timer, jiffies + ticks);
- } else
- kd_nosound(0);
+ if (hz && ticks)
+ mod_timer(&kd_mksound_timer, jiffies + ticks);
}
EXPORT_SYMBOL(kd_mksound);
@@ -269,27 +275,34 @@
* Setting the keyboard rate.
*/
+static int kbd_rate_helper(struct input_handle *handle, void *data)
+{
+ struct input_dev *dev = handle->dev;
+ struct kbd_repeat *rep = data;
+
+ if (test_bit(EV_REP, dev->evbit)) {
+
+ if (rep[0].delay > 0)
+ input_inject_event(handle,
+ EV_REP, REP_DELAY, rep[0].delay);
+ if (rep[0].period > 0)
+ input_inject_event(handle,
+ EV_REP, REP_PERIOD, rep[0].period);
+
+ rep[1].delay = dev->rep[REP_DELAY];
+ rep[1].period = dev->rep[REP_PERIOD];
+ }
+
+ return 0;
+}
+
int kbd_rate(struct kbd_repeat *rep)
{
- struct list_head *node;
- unsigned int d = 0;
- unsigned int p = 0;
+ struct kbd_repeat data[2] = { *rep };
- list_for_each(node, &kbd_handler.h_list) {
- struct input_handle *handle = to_handle_h(node);
- struct input_dev *dev = handle->dev;
+ input_handler_for_each_handle(&kbd_handler, data, kbd_rate_helper);
+ *rep = data[1]; /* Copy currently used settings */
- if (test_bit(EV_REP, dev->evbit)) {
- if (rep->delay > 0)
- input_inject_event(handle, EV_REP, REP_DELAY, rep->delay);
- if (rep->period > 0)
- input_inject_event(handle, EV_REP, REP_PERIOD, rep->period);
- d = dev->rep[REP_DELAY];
- p = dev->rep[REP_PERIOD];
- }
- }
- rep->delay = d;
- rep->period = p;
return 0;
}
@@ -997,36 +1010,36 @@
return leds;
}
-/*
- * This routine is the bottom half of the keyboard interrupt
- * routine, and runs with all interrupts enabled. It does
- * console changing, led setting and copy_to_cooked, which can
- * take a reasonably long time.
- *
- * Aside from timing (which isn't really that important for
- * keyboard interrupts as they happen often), using the software
- * interrupt routines for this thing allows us to easily mask
- * this when we don't want any of the above to happen.
- * This allows for easy and efficient race-condition prevention
- * for kbd_start => input_inject_event(dev, EV_LED, ...) => ...
- */
+static int kbd_update_leds_helper(struct input_handle *handle, void *data)
+{
+ unsigned char leds = *(unsigned char *)data;
+ if (test_bit(EV_LED, handle->dev->evbit)) {
+ input_inject_event(handle, EV_LED, LED_SCROLLL, !!(leds & 0x01));
+ input_inject_event(handle, EV_LED, LED_NUML, !!(leds & 0x02));
+ input_inject_event(handle, EV_LED, LED_CAPSL, !!(leds & 0x04));
+ input_inject_event(handle, EV_SYN, SYN_REPORT, 0);
+ }
+
+ return 0;
+}
+
+/*
+ * This is the tasklet that updates LED state on all keyboards
+ * attached to the box. The reason we use tasklet is that we
+ * need to handle the scenario when keyboard handler is not
+ * registered yet but we already getting updates form VT to
+ * update led state.
+ */
static void kbd_bh(unsigned long dummy)
{
- struct list_head *node;
unsigned char leds = getleds();
if (leds != ledstate) {
- list_for_each(node, &kbd_handler.h_list) {
- struct input_handle *handle = to_handle_h(node);
- input_inject_event(handle, EV_LED, LED_SCROLLL, !!(leds & 0x01));
- input_inject_event(handle, EV_LED, LED_NUML, !!(leds & 0x02));
- input_inject_event(handle, EV_LED, LED_CAPSL, !!(leds & 0x04));
- input_inject_event(handle, EV_SYN, SYN_REPORT, 0);
- }
+ input_handler_for_each_handle(&kbd_handler, &leds,
+ kbd_update_leds_helper);
+ ledstate = leds;
}
-
- ledstate = leds;
}
DECLARE_TASKLET_DISABLED(keyboard_tasklet, kbd_bh, 0);
@@ -1136,7 +1149,7 @@
static void kbd_rawcode(unsigned char data)
{
struct vc_data *vc = vc_cons[fg_console].d;
- kbd = kbd_table + fg_console;
+ kbd = kbd_table + vc->vc_num;
if (kbd->kbdmode == VC_RAW)
put_queue(vc, data);
}
@@ -1157,7 +1170,7 @@
tty->driver_data = vc;
}
- kbd = kbd_table + fg_console;
+ kbd = kbd_table + vc->vc_num;
if (keycode == KEY_LEFTALT || keycode == KEY_RIGHTALT)
sysrq_alt = down ? keycode : 0;
@@ -1296,10 +1309,16 @@
static void kbd_event(struct input_handle *handle, unsigned int event_type,
unsigned int event_code, int value)
{
+ /* We are called with interrupts disabled, just take the lock */
+ spin_lock(&kbd_event_lock);
+
if (event_type == EV_MSC && event_code == MSC_RAW && HW_RAW(handle->dev))
kbd_rawcode(value);
if (event_type == EV_KEY)
kbd_keycode(event_code, value, HW_RAW(handle->dev));
+
+ spin_unlock(&kbd_event_lock);
+
tasklet_schedule(&keyboard_tasklet);
do_poke_blanked_console = 1;
schedule_console_callback();
@@ -1363,15 +1382,11 @@
*/
static void kbd_start(struct input_handle *handle)
{
- unsigned char leds = ledstate;
-
tasklet_disable(&keyboard_tasklet);
- if (leds != 0xff) {
- input_inject_event(handle, EV_LED, LED_SCROLLL, !!(leds & 0x01));
- input_inject_event(handle, EV_LED, LED_NUML, !!(leds & 0x02));
- input_inject_event(handle, EV_LED, LED_CAPSL, !!(leds & 0x04));
- input_inject_event(handle, EV_SYN, SYN_REPORT, 0);
- }
+
+ if (ledstate != 0xff)
+ kbd_update_leds_helper(handle, &ledstate);
+
tasklet_enable(&keyboard_tasklet);
}
diff --git a/drivers/char/mem.c b/drivers/char/mem.c
index a074fce..30eff80 100644
--- a/drivers/char/mem.c
+++ b/drivers/char/mem.c
@@ -5,7 +5,7 @@
*
* Added devfs support.
* Jan-11-1998, C. Scott Ananian <cananian@alumni.princeton.edu>
- * Shared /dev/zero mmaping support, Feb 2000, Kanoj Sarcar <kanoj@sgi.com>
+ * Shared /dev/zero mmapping support, Feb 2000, Kanoj Sarcar <kanoj@sgi.com>
*/
#include <linux/mm.h>
@@ -26,7 +26,6 @@
#include <linux/bootmem.h>
#include <linux/splice.h>
#include <linux/pfn.h>
-#include <linux/smp_lock.h>
#include <asm/uaccess.h>
#include <asm/io.h>
@@ -892,29 +891,23 @@
{
int minor;
const struct memdev *dev;
- int ret = -ENXIO;
-
- lock_kernel();
minor = iminor(inode);
if (minor >= ARRAY_SIZE(devlist))
- goto out;
+ return -ENXIO;
dev = &devlist[minor];
if (!dev->fops)
- goto out;
+ return -ENXIO;
filp->f_op = dev->fops;
if (dev->dev_info)
filp->f_mapping->backing_dev_info = dev->dev_info;
if (dev->fops->open)
- ret = dev->fops->open(inode, filp);
- else
- ret = 0;
-out:
- unlock_kernel();
- return ret;
+ return dev->fops->open(inode, filp);
+
+ return 0;
}
static const struct file_operations memory_fops = {
diff --git a/drivers/char/misc.c b/drivers/char/misc.c
index 07fa612..96f1cd0 100644
--- a/drivers/char/misc.c
+++ b/drivers/char/misc.c
@@ -49,7 +49,6 @@
#include <linux/device.h>
#include <linux/tty.h>
#include <linux/kmod.h>
-#include <linux/smp_lock.h>
/*
* Head entry for the doubly linked miscdevice list
@@ -118,8 +117,7 @@
struct miscdevice *c;
int err = -ENODEV;
const struct file_operations *old_fops, *new_fops = NULL;
-
- lock_kernel();
+
mutex_lock(&misc_mtx);
list_for_each_entry(c, &misc_list, list) {
@@ -157,7 +155,6 @@
fops_put(old_fops);
fail:
mutex_unlock(&misc_mtx);
- unlock_kernel();
return err;
}
diff --git a/drivers/char/mspec.c b/drivers/char/mspec.c
index 1997270..ecb89d7 100644
--- a/drivers/char/mspec.c
+++ b/drivers/char/mspec.c
@@ -248,7 +248,7 @@
/*
* mspec_mmap
*
- * Called when mmaping the device. Initializes the vma with a fault handler
+ * Called when mmapping the device. Initializes the vma with a fault handler
* and private data structure necessary to allocate, track, and free the
* underlying pages.
*/
diff --git a/drivers/char/n_r3964.c b/drivers/char/n_r3964.c
index 6934025..c1d8b54 100644
--- a/drivers/char/n_r3964.c
+++ b/drivers/char/n_r3964.c
@@ -602,7 +602,7 @@
}
break;
case R3964_WAIT_FOR_RX_REPEAT:
- /* FALLTROUGH */
+ /* FALLTHROUGH */
case R3964_IDLE:
if (c == STX) {
/* Prevent rx_queue from overflow: */
diff --git a/drivers/char/nvram.c b/drivers/char/nvram.c
index 88cee40..4008e2c 100644
--- a/drivers/char/nvram.c
+++ b/drivers/char/nvram.c
@@ -38,7 +38,6 @@
#define NVRAM_VERSION "1.3"
#include <linux/module.h>
-#include <linux/smp_lock.h>
#include <linux/nvram.h>
#define PC 1
@@ -111,6 +110,7 @@
#include <linux/spinlock.h>
#include <linux/io.h>
#include <linux/uaccess.h>
+#include <linux/smp_lock.h>
#include <asm/system.h>
@@ -214,7 +214,6 @@
static loff_t nvram_llseek(struct file *file, loff_t offset, int origin)
{
- lock_kernel();
switch (origin) {
case 0:
/* nothing to do */
@@ -226,7 +225,7 @@
offset += NVRAM_BYTES;
break;
}
- unlock_kernel();
+
return (offset >= 0) ? (file->f_pos = offset) : -EINVAL;
}
diff --git a/drivers/char/pc8736x_gpio.c b/drivers/char/pc8736x_gpio.c
index 3f7da8c..8ecbcc1 100644
--- a/drivers/char/pc8736x_gpio.c
+++ b/drivers/char/pc8736x_gpio.c
@@ -20,7 +20,6 @@
#include <linux/mutex.h>
#include <linux/nsc_gpio.h>
#include <linux/platform_device.h>
-#include <linux/smp_lock.h>
#include <asm/uaccess.h>
#define DEVNAME "pc8736x_gpio"
@@ -223,7 +222,6 @@
unsigned m = iminor(inode);
file->private_data = &pc8736x_gpio_ops;
- cycle_kernel_lock();
dev_dbg(&pdev->dev, "open %d\n", m);
if (m >= PC8736X_GPIO_CT)
diff --git a/drivers/char/rio/route.h b/drivers/char/rio/route.h
index 20ed73f..46e9637 100644
--- a/drivers/char/rio/route.h
+++ b/drivers/char/rio/route.h
@@ -67,7 +67,7 @@
typedef struct COST_ROUTE COST_ROUTE;
struct COST_ROUTE {
unsigned char cost; /* Cost down this link */
- unsigned char route[NODE_BYTES]; /* Nodes thorough this route */
+ unsigned char route[NODE_BYTES]; /* Nodes through this route */
};
typedef struct ROUTE_STR ROUTE_STR;
diff --git a/drivers/char/scx200_gpio.c b/drivers/char/scx200_gpio.c
index 1d91005..99e5272 100644
--- a/drivers/char/scx200_gpio.c
+++ b/drivers/char/scx200_gpio.c
@@ -12,7 +12,6 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <linux/smp_lock.h>
#include <asm/uaccess.h>
#include <asm/io.h>
@@ -52,7 +51,6 @@
unsigned m = iminor(inode);
file->private_data = &scx200_gpio_ops;
- cycle_kernel_lock();
if (m >= MAX_PINS)
return -EINVAL;
return nonseekable_open(inode, file);
diff --git a/drivers/char/tb0219.c b/drivers/char/tb0219.c
index b3ec9b1..cad4eb6 100644
--- a/drivers/char/tb0219.c
+++ b/drivers/char/tb0219.c
@@ -21,7 +21,6 @@
#include <linux/fs.h>
#include <linux/init.h>
#include <linux/module.h>
-#include <linux/smp_lock.h>
#include <asm/io.h>
#include <asm/reboot.h>
@@ -38,7 +37,7 @@
static void (*old_machine_restart)(char *command);
static void __iomem *tb0219_base;
-static spinlock_t tb0219_lock;
+static DEFINE_SPINLOCK(tb0219_lock);
#define tb0219_read(offset) readw(tb0219_base + (offset))
#define tb0219_write(offset, value) writew((value), tb0219_base + (offset))
@@ -237,7 +236,6 @@
{
unsigned int minor;
- cycle_kernel_lock();
minor = iminor(inode);
switch (minor) {
case 0:
@@ -306,8 +304,6 @@
return retval;
}
- spin_lock_init(&tb0219_lock);
-
old_machine_restart = _machine_restart;
_machine_restart = tb0219_restart;
diff --git a/drivers/char/tty_ioctl.c b/drivers/char/tty_ioctl.c
index 8e67d5c..6bd5f88 100644
--- a/drivers/char/tty_ioctl.c
+++ b/drivers/char/tty_ioctl.c
@@ -315,7 +315,7 @@
* For maximal back compatibility with legacy SYS5/POSIX *nix behaviour
* we need to carefully set the bits when the user does not get the
* desired speed. We allow small margins and preserve as much of possible
- * of the input intent to keep compatiblity.
+ * of the input intent to keep compatibility.
*
* Locking: Caller should hold termios lock. This is already held
* when calling this function from the driver termios handler.
diff --git a/drivers/cpuidle/governor.c b/drivers/cpuidle/governor.c
index 70b5964..724c164 100644
--- a/drivers/cpuidle/governor.c
+++ b/drivers/cpuidle/governor.c
@@ -21,7 +21,7 @@
* __cpuidle_find_governor - finds a governor of the specified name
* @str: the name
*
- * Must be called with cpuidle_lock aquired.
+ * Must be called with cpuidle_lock acquired.
*/
static struct cpuidle_governor * __cpuidle_find_governor(const char *str)
{
@@ -39,7 +39,7 @@
* @gov: the new target governor
*
* NOTE: "gov" can be NULL to specify disabled
- * Must be called with cpuidle_lock aquired.
+ * Must be called with cpuidle_lock acquired.
*/
int cpuidle_switch_governor(struct cpuidle_governor *gov)
{
diff --git a/drivers/crypto/hifn_795x.c b/drivers/crypto/hifn_795x.c
index 5f753fc..09ad915 100644
--- a/drivers/crypto/hifn_795x.c
+++ b/drivers/crypto/hifn_795x.c
@@ -863,7 +863,7 @@
dev->dmareg |= HIFN_DMAIER_PUBDONE;
hifn_write_1(dev, HIFN_1_DMA_IER, dev->dmareg);
- dprintk("Chip %s: Public key engine has been sucessfully "
+ dprintk("Chip %s: Public key engine has been successfully "
"initialised.\n", dev->name);
}
diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c
index 7585c41..c52ac9e 100644
--- a/drivers/dma/at_hdmac.c
+++ b/drivers/dma/at_hdmac.c
@@ -99,7 +99,7 @@
}
/**
- * atc_desc_get - get a unsused descriptor from free_list
+ * atc_desc_get - get an unused descriptor from free_list
* @atchan: channel we want a new descriptor for
*/
static struct at_desc *atc_desc_get(struct at_dma_chan *atchan)
diff --git a/drivers/firewire/core-topology.c b/drivers/firewire/core-topology.c
index 9a5f38c..93ec64c 100644
--- a/drivers/firewire/core-topology.c
+++ b/drivers/firewire/core-topology.c
@@ -183,7 +183,7 @@
* This function builds the tree representation of the topology given
* by the self IDs from the latest bus reset. During the construction
* of the tree, the function checks that the self IDs are valid and
- * internally consistent. On succcess this function returns the
+ * internally consistent. On success this function returns the
* fw_node corresponding to the local card otherwise NULL.
*/
static struct fw_node *build_tree(struct fw_card *card,
diff --git a/drivers/firmware/dmi_scan.c b/drivers/firmware/dmi_scan.c
index 938100f..3a2ccb0 100644
--- a/drivers/firmware/dmi_scan.c
+++ b/drivers/firmware/dmi_scan.c
@@ -429,7 +429,7 @@
for (i = 0; i < ARRAY_SIZE(dmi->matches); i++) {
int s = dmi->matches[i].slot;
if (s == DMI_NONE)
- continue;
+ break;
if (dmi_ident[s]
&& strstr(dmi_ident[s], dmi->matches[i].substr))
continue;
@@ -440,6 +440,15 @@
}
/**
+ * dmi_is_end_of_table - check for end-of-table marker
+ * @dmi: pointer to the dmi_system_id structure to check
+ */
+static bool dmi_is_end_of_table(const struct dmi_system_id *dmi)
+{
+ return dmi->matches[0].slot == DMI_NONE;
+}
+
+/**
* dmi_check_system - check system DMI data
* @list: array of dmi_system_id structures to match against
* All non-null elements of the list must match
@@ -457,7 +466,7 @@
int count = 0;
const struct dmi_system_id *d;
- for (d = list; d->ident; d++)
+ for (d = list; !dmi_is_end_of_table(d); d++)
if (dmi_matches(d)) {
count++;
if (d->callback && d->callback(d))
@@ -484,7 +493,7 @@
{
const struct dmi_system_id *d;
- for (d = list; d->ident; d++)
+ for (d = list; !dmi_is_end_of_table(d); d++)
if (dmi_matches(d))
return d;
diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
index 5cae0b3..3f7c500 100644
--- a/drivers/gpu/drm/drm_crtc.c
+++ b/drivers/gpu/drm/drm_crtc.c
@@ -272,7 +272,7 @@
* functions & device file and adds it to the master fd list.
*
* RETURNS:
- * Zero on success, error code on falure.
+ * Zero on success, error code on failure.
*/
int drm_framebuffer_init(struct drm_device *dev, struct drm_framebuffer *fb,
const struct drm_framebuffer_funcs *funcs)
@@ -2328,7 +2328,7 @@
} else if (connector->funcs->set_property)
ret = connector->funcs->set_property(connector, property, out_resp->value);
- /* store the property value if succesful */
+ /* store the property value if successful */
if (!ret)
drm_connector_property_set_value(connector, property, out_resp->value);
out:
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index abfc27b..a2a3fa5 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -1309,7 +1309,7 @@
* i915_gem_release_mmap - remove physical page mappings
* @obj: obj in question
*
- * Preserve the reservation of the mmaping with the DRM core code, but
+ * Preserve the reservation of the mmapping with the DRM core code, but
* relinquish ownership of the pages back to the system.
*
* It is vital that we remove the page mapping if we have mapped a tiled
diff --git a/drivers/gpu/drm/i915/intel_fb.c b/drivers/gpu/drm/i915/intel_fb.c
index 2b0fe54..40fcf6f 100644
--- a/drivers/gpu/drm/i915/intel_fb.c
+++ b/drivers/gpu/drm/i915/intel_fb.c
@@ -70,7 +70,7 @@
/**
- * Curretly it is assumed that the old framebuffer is reused.
+ * Currently it is assumed that the old framebuffer is reused.
*
* LOCKING
* caller should hold the mode config lock.
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index 05598ae..eb36502 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -899,7 +899,7 @@
acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
ACPI_UINT32_MAX,
- check_lid_device, &lid_present, NULL);
+ check_lid_device, NULL, &lid_present, NULL);
return lid_present;
}
diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index 083bec2..e7fa327 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -2726,7 +2726,7 @@
/* Wrap with our custom algo which switches to DDC mode */
intel_output->ddc_bus->algo = &intel_sdvo_i2c_bit_algo;
- /* In defaut case sdvo lvds is false */
+ /* In default case sdvo lvds is false */
intel_sdvo_get_capabilities(intel_output, &sdvo_priv->caps);
if (intel_sdvo_output_setup(intel_output,
diff --git a/drivers/gpu/drm/radeon/atombios.h b/drivers/gpu/drm/radeon/atombios.h
index c11dddd..6643afc 100644
--- a/drivers/gpu/drm/radeon/atombios.h
+++ b/drivers/gpu/drm/radeon/atombios.h
@@ -1141,7 +1141,7 @@
/* ucTableFormatRevision=1,ucTableContentRevision=2 */
typedef struct _LVDS_ENCODER_CONTROL_PARAMETERS_V2 {
USHORT usPixelClock; /* in 10KHz; for bios convenient */
- UCHAR ucMisc; /* see PANEL_ENCODER_MISC_xx defintions below */
+ UCHAR ucMisc; /* see PANEL_ENCODER_MISC_xx definitions below */
UCHAR ucAction; /* 0: turn off encoder */
/* 1: setup and turn on encoder */
UCHAR ucTruncate; /* bit0=0: Disable truncate */
@@ -1424,7 +1424,7 @@
/* Structures used in FirmwareInfoTable */
/****************************************************************************/
-/* usBIOSCapability Defintion: */
+/* usBIOSCapability Definition: */
/* Bit 0 = 0: Bios image is not Posted, =1:Bios image is Posted; */
/* Bit 1 = 0: Dual CRTC is not supported, =1: Dual CRTC is supported; */
/* Bit 2 = 0: Extended Desktop is not supported, =1: Extended Desktop is supported; */
@@ -2386,7 +2386,7 @@
} ATOM_ANALOG_TV_INFO_V1_2;
/**************************************************************************/
-/* VRAM usage and their defintions */
+/* VRAM usage and their definitions */
/* One chunk of VRAM used by Bios are for HWICON surfaces,EDID data. */
/* Current Mode timing and Dail Timing and/or STD timing data EACH device. They can be broken down as below. */
@@ -3046,7 +3046,7 @@
#define ATOM_S0_SYSTEM_POWER_STATE_VALUE_DC 2
#define ATOM_S0_SYSTEM_POWER_STATE_VALUE_LITEAC 3
-/* Byte aligned defintion for BIOS usage */
+/* Byte aligned definition for BIOS usage */
#define ATOM_S0_CRT1_MONOb0 0x01
#define ATOM_S0_CRT1_COLORb0 0x02
#define ATOM_S0_CRT1_MASKb0 (ATOM_S0_CRT1_MONOb0+ATOM_S0_CRT1_COLORb0)
@@ -3131,7 +3131,7 @@
#define ATOM_S2_DISPLAY_ROTATION_DEGREE_SHIFT 30
#define ATOM_S2_DISPLAY_ROTATION_ANGLE_MASK 0xC0000000L
-/* Byte aligned defintion for BIOS usage */
+/* Byte aligned definition for BIOS usage */
#define ATOM_S2_TV1_STANDARD_MASKb0 0x0F
#define ATOM_S2_CURRENT_BL_LEVEL_MASKb1 0xFF
#define ATOM_S2_CRT1_DPMS_STATEb2 0x01
@@ -3190,7 +3190,7 @@
#define ATOM_S3_ALLOW_FAST_PWR_SWITCH 0x40000000L
#define ATOM_S3_RQST_GPU_USE_MIN_PWR 0x80000000L
-/* Byte aligned defintion for BIOS usage */
+/* Byte aligned definition for BIOS usage */
#define ATOM_S3_CRT1_ACTIVEb0 0x01
#define ATOM_S3_LCD1_ACTIVEb0 0x02
#define ATOM_S3_TV1_ACTIVEb0 0x04
@@ -3230,7 +3230,7 @@
#define ATOM_S4_LCD1_REFRESH_MASK 0x0000FF00L
#define ATOM_S4_LCD1_REFRESH_SHIFT 8
-/* Byte aligned defintion for BIOS usage */
+/* Byte aligned definition for BIOS usage */
#define ATOM_S4_LCD1_PANEL_ID_MASKb0 0x0FF
#define ATOM_S4_LCD1_REFRESH_MASKb1 ATOM_S4_LCD1_PANEL_ID_MASKb0
#define ATOM_S4_VRAM_INFO_MASKb2 ATOM_S4_LCD1_PANEL_ID_MASKb0
@@ -3310,7 +3310,7 @@
#define ATOM_S6_VRI_BRIGHTNESS_CHANGE 0x40000000L
#define ATOM_S6_CONFIG_DISPLAY_CHANGE_MASK 0x80000000L
-/* Byte aligned defintion for BIOS usage */
+/* Byte aligned definition for BIOS usage */
#define ATOM_S6_DEVICE_CHANGEb0 0x01
#define ATOM_S6_SCALER_CHANGEb0 0x02
#define ATOM_S6_LID_CHANGEb0 0x04
diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c
index 278f646..6740ed2 100644
--- a/drivers/gpu/drm/radeon/r600.c
+++ b/drivers/gpu/drm/radeon/r600.c
@@ -394,11 +394,11 @@
* AGP so that GPU can catch out of VRAM/AGP access
*/
if (rdev->mc.gtt_location > rdev->mc.mc_vram_size) {
- /* Enought place before */
+ /* Enough place before */
rdev->mc.vram_location = rdev->mc.gtt_location -
rdev->mc.mc_vram_size;
} else if (tmp > rdev->mc.mc_vram_size) {
- /* Enought place after */
+ /* Enough place after */
rdev->mc.vram_location = rdev->mc.gtt_location +
rdev->mc.gtt_size;
} else {
diff --git a/drivers/gpu/drm/radeon/radeon_fb.c b/drivers/gpu/drm/radeon/radeon_fb.c
index b38c4c8..d10eb43 100644
--- a/drivers/gpu/drm/radeon/radeon_fb.c
+++ b/drivers/gpu/drm/radeon/radeon_fb.c
@@ -59,7 +59,7 @@
};
/**
- * Curretly it is assumed that the old framebuffer is reused.
+ * Currently it is assumed that the old framebuffer is reused.
*
* LOCKING
* caller should hold the mode config lock.
diff --git a/drivers/gpu/drm/radeon/radeon_state.c b/drivers/gpu/drm/radeon/radeon_state.c
index 38537d9..067167c 100644
--- a/drivers/gpu/drm/radeon/radeon_state.c
+++ b/drivers/gpu/drm/radeon/radeon_state.c
@@ -1950,7 +1950,7 @@
* Note that refcount can be at most 2, since during a free refcount=3
* might mean we have to allocate a new surface which might not always
* be available.
- * For example : we allocate three contigous surfaces ABC. If B is
+ * For example : we allocate three contiguous surfaces ABC. If B is
* freed, we suddenly need two surfaces to store A and C, which might
* not always be available.
*/
diff --git a/drivers/gpu/drm/radeon/radeon_ttm.c b/drivers/gpu/drm/radeon/radeon_ttm.c
index 1381e06..eda4ade 100644
--- a/drivers/gpu/drm/radeon/radeon_ttm.c
+++ b/drivers/gpu/drm/radeon/radeon_ttm.c
@@ -378,7 +378,7 @@
new_mem->mem_type == TTM_PL_SYSTEM) ||
(old_mem->mem_type == TTM_PL_SYSTEM &&
new_mem->mem_type == TTM_PL_TT)) {
- /* bind is enought */
+ /* bind is enough */
radeon_move_null(bo, new_mem);
return 0;
}
diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c
index b0efd0d..5e06ee7 100644
--- a/drivers/gpu/drm/radeon/rv770.c
+++ b/drivers/gpu/drm/radeon/rv770.c
@@ -829,11 +829,11 @@
* AGP so that GPU can catch out of VRAM/AGP access
*/
if (rdev->mc.gtt_location > rdev->mc.mc_vram_size) {
- /* Enought place before */
+ /* Enough place before */
rdev->mc.vram_location = rdev->mc.gtt_location -
rdev->mc.mc_vram_size;
} else if (tmp > rdev->mc.mc_vram_size) {
- /* Enought place after */
+ /* Enough place after */
rdev->mc.vram_location = rdev->mc.gtt_location +
rdev->mc.gtt_size;
} else {
diff --git a/drivers/gpu/drm/ttm/ttm_bo_util.c b/drivers/gpu/drm/ttm/ttm_bo_util.c
index c70927e..61c5572 100644
--- a/drivers/gpu/drm/ttm/ttm_bo_util.c
+++ b/drivers/gpu/drm/ttm/ttm_bo_util.c
@@ -427,7 +427,7 @@
/*
* We need to use vmap to get the desired page protection
- * or to make the buffer object look contigous.
+ * or to make the buffer object look contiguous.
*/
prot = (mem->placement & TTM_PL_FLAG_CACHED) ?
PAGE_KERNEL :
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index 7d05c4b..80792d3 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -39,8 +39,6 @@
* Version Information
*/
-#define DRIVER_VERSION "v2.6"
-#define DRIVER_AUTHOR "Andreas Gal, Vojtech Pavlik, Jiri Kosina"
#define DRIVER_DESC "HID core driver"
#define DRIVER_LICENSE "GPL"
@@ -1294,6 +1292,7 @@
{ HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_TACTICAL_PAD) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_BARCODE_1) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_BARCODE_2) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_BARCODE_3) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_MOUSE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, 0x0006) },
{ HID_USB_DEVICE(USB_VENDOR_ID_EZKEY, USB_DEVICE_ID_BTC_8193) },
@@ -1326,6 +1325,8 @@
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_MOMO_WHEEL2) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_G25_WHEEL) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_RUMBLEPAD2) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_SPACETRAVELLER) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_SPACENAVIGATOR) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_SIDEWINDER_GV) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_NE4K) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_LK6K) },
@@ -1620,6 +1621,7 @@
{ HID_USB_DEVICE(USB_VENDOR_ID_KBGEAR, USB_DEVICE_ID_KBGEAR_JAMSTUDIO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_KWORLD, USB_DEVICE_ID_KWORLD_RADIO_FM700) },
{ HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_GPEN_560) },
+ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_KYE, 0x0058) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_CASSY) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_POCKETCASSY) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MOBILECASSY) },
@@ -1918,5 +1920,8 @@
module_init(hid_init);
module_exit(hid_exit);
+MODULE_AUTHOR("Andreas Gal");
+MODULE_AUTHOR("Vojtech Pavlik");
+MODULE_AUTHOR("Jiri Kosina");
MODULE_LICENSE(DRIVER_LICENSE);
diff --git a/drivers/hid/hid-cypress.c b/drivers/hid/hid-cypress.c
index 62e9cb1..998b6f4 100644
--- a/drivers/hid/hid-cypress.c
+++ b/drivers/hid/hid-cypress.c
@@ -126,6 +126,8 @@
.driver_data = CP_RDESC_SWAPPED_MIN_MAX },
{ HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_BARCODE_2),
.driver_data = CP_RDESC_SWAPPED_MIN_MAX },
+ { HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_BARCODE_3),
+ .driver_data = CP_RDESC_SWAPPED_MIN_MAX },
{ HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_MOUSE),
.driver_data = CP_2WHEEL_MOUSE_HACK },
{ }
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index adbef5d..3839340 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -117,6 +117,7 @@
#define USB_DEVICE_ID_CH_PRO_PEDALS 0x00f2
#define USB_DEVICE_ID_CH_COMBATSTICK 0x00f4
#define USB_DEVICE_ID_CH_FLIGHT_SIM_YOKE 0x00ff
+#define USB_DEVICE_ID_CH_3AXIS_5BUTTON_STICK 0x00d3
#define USB_VENDOR_ID_CHERRY 0x046a
#define USB_DEVICE_ID_CHERRY_CYMOTION 0x0023
@@ -145,6 +146,7 @@
#define USB_DEVICE_ID_CYPRESS_ULTRAMOUSE 0x7417
#define USB_DEVICE_ID_CYPRESS_BARCODE_1 0xde61
#define USB_DEVICE_ID_CYPRESS_BARCODE_2 0xde64
+#define USB_DEVICE_ID_CYPRESS_BARCODE_3 0xbca1
#define USB_VENDOR_ID_DEALEXTREAME 0x10c5
#define USB_DEVICE_ID_DEALEXTREAME_RADIO_SI4701 0x819a
@@ -304,6 +306,8 @@
#define USB_DEVICE_ID_S510_RECEIVER_2 0xc517
#define USB_DEVICE_ID_LOGITECH_CORDLESS_DESKTOP_LX500 0xc512
#define USB_DEVICE_ID_MX3000_RECEIVER 0xc513
+#define USB_DEVICE_ID_SPACETRAVELLER 0xc623
+#define USB_DEVICE_ID_SPACENAVIGATOR 0xc626
#define USB_DEVICE_ID_DINOVO_DESKTOP 0xc704
#define USB_DEVICE_ID_DINOVO_EDGE 0xc714
#define USB_DEVICE_ID_DINOVO_MINI 0xc71f
@@ -346,6 +350,9 @@
#define USB_VENDOR_ID_NEC 0x073e
#define USB_DEVICE_ID_NEC_USB_GAME_PAD 0x0301
+#define USB_VENDOR_ID_NEXTWINDOW 0x1926
+#define USB_DEVICE_ID_NEXTWINDOW_TOUCHSCREEN 0x0003
+
#define USB_VENDOR_ID_NTRIG 0x1b96
#define USB_DEVICE_ID_NTRIG_TOUCH_SCREEN 0x0001
diff --git a/drivers/hid/hid-lg.c b/drivers/hid/hid-lg.c
index 0f870a3..9fcd3d0 100644
--- a/drivers/hid/hid-lg.c
+++ b/drivers/hid/hid-lg.c
@@ -33,6 +33,7 @@
#define LG_NOGET 0x100
#define LG_FF 0x200
#define LG_FF2 0x400
+#define LG_RDESC_REL_ABS 0x800
/*
* Certain Logitech keyboards send in report #3 keys which are far
@@ -51,6 +52,13 @@
rdesc[84] = rdesc[89] = 0x4d;
rdesc[85] = rdesc[90] = 0x10;
}
+ if ((quirks & LG_RDESC_REL_ABS) && rsize >= 50 &&
+ rdesc[32] == 0x81 && rdesc[33] == 0x06 &&
+ rdesc[49] == 0x81 && rdesc[50] == 0x06) {
+ dev_info(&hdev->dev, "fixing up rel/abs in Logitech "
+ "report descriptor\n");
+ rdesc[33] = rdesc[50] = 0x02;
+ }
}
#define lg_map_key_clear(c) hid_map_usage_clear(hi, usage, bit, max, \
@@ -89,6 +97,22 @@
return 1;
}
+static int lg_dinovo_mapping(struct hid_input *hi, struct hid_usage *usage,
+ unsigned long **bit, int *max)
+{
+ if ((usage->hid & HID_USAGE_PAGE) != HID_UP_LOGIVENDOR)
+ return 0;
+
+ switch (usage->hid & HID_USAGE) {
+
+ case 0x00d: lg_map_key_clear(KEY_MEDIA); break;
+ default:
+ return 0;
+
+ }
+ return 1;
+}
+
static int lg_wireless_mapping(struct hid_input *hi, struct hid_usage *usage,
unsigned long **bit, int *max)
{
@@ -164,6 +188,10 @@
lg_ultrax_remote_mapping(hi, usage, bit, max))
return 1;
+ if (hdev->product == USB_DEVICE_ID_DINOVO_MINI &&
+ lg_dinovo_mapping(hi, usage, bit, max))
+ return 1;
+
if ((quirks & LG_WIRELESS) && lg_wireless_mapping(hi, usage, bit, max))
return 1;
@@ -303,8 +331,13 @@
.driver_data = LG_FF },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_RUMBLEPAD2),
.driver_data = LG_FF2 },
+ { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_SPACENAVIGATOR),
+ .driver_data = LG_RDESC_REL_ABS },
+ { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_SPACETRAVELLER),
+ .driver_data = LG_RDESC_REL_ABS },
{ }
};
+
MODULE_DEVICE_TABLE(hid, lg_devices);
static struct hid_driver lg_driver = {
diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c
index 03bd703..0258289 100644
--- a/drivers/hid/usbhid/hid-core.c
+++ b/drivers/hid/usbhid/hid-core.c
@@ -41,8 +41,6 @@
* Version Information
*/
-#define DRIVER_VERSION "v2.6"
-#define DRIVER_AUTHOR "Andreas Gal, Vojtech Pavlik, Jiri Kosina"
#define DRIVER_DESC "USB HID core driver"
#define DRIVER_LICENSE "GPL"
@@ -998,7 +996,8 @@
usbhid->urbctrl->transfer_dma = usbhid->ctrlbuf_dma;
usbhid->urbctrl->transfer_flags |= (URB_NO_TRANSFER_DMA_MAP | URB_NO_SETUP_DMA_MAP);
- usbhid_init_reports(hid);
+ if (!(hid->quirks & HID_QUIRK_NO_INIT_REPORTS))
+ usbhid_init_reports(hid);
set_bit(HID_STARTED, &usbhid->iofl);
@@ -1395,8 +1394,7 @@
retval = usb_register(&hid_driver);
if (retval)
goto usb_register_fail;
- printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
- DRIVER_DESC "\n");
+ printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_DESC "\n");
return 0;
usb_register_fail:
@@ -1423,6 +1421,8 @@
module_init(hid_init);
module_exit(hid_exit);
-MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_AUTHOR("Andreas Gal");
+MODULE_AUTHOR("Vojtech Pavlik");
+MODULE_AUTHOR("Jiri Kosina");
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE(DRIVER_LICENSE);
diff --git a/drivers/hid/usbhid/hid-pidff.c b/drivers/hid/usbhid/hid-pidff.c
index 484e3ee..e565dbe 100644
--- a/drivers/hid/usbhid/hid-pidff.c
+++ b/drivers/hid/usbhid/hid-pidff.c
@@ -1181,12 +1181,11 @@
usbhid_wait_io(hid);
if (pidff->pool[PID_SIMULTANEOUS_MAX].value) {
- int sim_effects = pidff->pool[PID_SIMULTANEOUS_MAX].value[0];
- while (sim_effects < 2) {
+ while (pidff->pool[PID_SIMULTANEOUS_MAX].value[0] < 2) {
if (i++ > 20) {
printk(KERN_WARNING "hid-pidff: device reports "
"%d simultaneous effects\n",
- sim_effects);
+ pidff->pool[PID_SIMULTANEOUS_MAX].value[0]);
break;
}
debug("pid_pool requested again");
diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c
index 0d9045a..38773dc 100644
--- a/drivers/hid/usbhid/hid-quirks.c
+++ b/drivers/hid/usbhid/hid-quirks.c
@@ -37,6 +37,7 @@
{ USB_VENDOR_ID_HAPP, USB_DEVICE_ID_UGCI_FIGHTING, HID_QUIRK_BADPAD | HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_NATSU, USB_DEVICE_ID_NATSU_GAMEPAD, HID_QUIRK_BADPAD },
{ USB_VENDOR_ID_NEC, USB_DEVICE_ID_NEC_USB_GAME_PAD, HID_QUIRK_BADPAD },
+ { USB_VENDOR_ID_NEXTWINDOW, USB_DEVICE_ID_NEXTWINDOW_TOUCHSCREEN, HID_QUIRK_MULTI_INPUT},
{ USB_VENDOR_ID_SAITEK, USB_DEVICE_ID_SAITEK_RUMBLEPAD, HID_QUIRK_BADPAD },
{ USB_VENDOR_ID_TOPMAX, USB_DEVICE_ID_TOPMAX_COBRAPAD, HID_QUIRK_BADPAD },
@@ -53,6 +54,7 @@
{ USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_COMBATSTICK, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_FLIGHT_SIM_YOKE, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_PRO_PEDALS, HID_QUIRK_NOGET },
+ { USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_3AXIS_5BUTTON_STICK, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_DMI, USB_DEVICE_ID_DMI_ENC, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_ELO, USB_DEVICE_ID_ELO_TS2700, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_SUN, USB_DEVICE_ID_RARITAN_KVM_DONGLE, HID_QUIRK_NOGET },
@@ -280,7 +282,7 @@
if (idVendor == USB_VENDOR_ID_NCR &&
idProduct >= USB_DEVICE_ID_NCR_FIRST &&
idProduct <= USB_DEVICE_ID_NCR_LAST)
- return HID_QUIRK_NOGET;
+ return HID_QUIRK_NO_INIT_REPORTS;
down_read(&dquirks_rwsem);
bl_entry = usbhid_exists_dquirk(idVendor, idProduct);
diff --git a/drivers/hid/usbhid/hiddev.c b/drivers/hid/usbhid/hiddev.c
index 8b6ee24..867e084 100644
--- a/drivers/hid/usbhid/hiddev.c
+++ b/drivers/hid/usbhid/hiddev.c
@@ -450,7 +450,6 @@
uref_multi = kmalloc(sizeof(struct hiddev_usage_ref_multi), GFP_KERNEL);
if (!uref_multi)
return -ENOMEM;
- lock_kernel();
uref = &uref_multi->uref;
if (cmd == HIDIOCGUSAGES || cmd == HIDIOCSUSAGES) {
if (copy_from_user(uref_multi, user_arg,
@@ -528,7 +527,6 @@
case HIDIOCGCOLLECTIONINDEX:
i = field->usage[uref->usage_index].collection_index;
- unlock_kernel();
kfree(uref_multi);
return i;
case HIDIOCGUSAGES:
@@ -547,15 +545,12 @@
}
goodreturn:
- unlock_kernel();
kfree(uref_multi);
return 0;
fault:
- unlock_kernel();
kfree(uref_multi);
return -EFAULT;
inval:
- unlock_kernel();
kfree(uref_multi);
return -EINVAL;
}
diff --git a/drivers/hid/usbhid/usbkbd.c b/drivers/hid/usbhid/usbkbd.c
index b342926..f843443 100644
--- a/drivers/hid/usbhid/usbkbd.c
+++ b/drivers/hid/usbhid/usbkbd.c
@@ -266,7 +266,7 @@
le16_to_cpu(dev->descriptor.idProduct));
usb_make_path(dev, kbd->phys, sizeof(kbd->phys));
- strlcpy(kbd->phys, "/input0", sizeof(kbd->phys));
+ strlcat(kbd->phys, "/input0", sizeof(kbd->phys));
input_dev->name = kbd->name;
input_dev->phys = kbd->phys;
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 700e93a..9e640c6 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -191,21 +191,27 @@
will be called adt7470.
config SENSORS_ADT7473
- tristate "Analog Devices ADT7473"
+ tristate "Analog Devices ADT7473 (DEPRECATED)"
depends on I2C && EXPERIMENTAL
+ select SENSORS_ADT7475
help
If you say yes here you get support for the Analog Devices
ADT7473 temperature monitoring chips.
+ This driver is deprecated, you should use the adt7475 driver
+ instead.
+
This driver can also be built as a module. If so, the module
will be called adt7473.
config SENSORS_ADT7475
- tristate "Analog Devices ADT7475"
+ tristate "Analog Devices ADT7473, ADT7475, ADT7476 and ADT7490"
depends on I2C && EXPERIMENTAL
+ select HWMON_VID
help
If you say yes here you get support for the Analog Devices
- ADT7475 hardware monitoring chips.
+ ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring
+ chips.
This driver can also be build as a module. If so, the module
will be called adt7475.
@@ -305,12 +311,12 @@
will be called f71805f.
config SENSORS_F71882FG
- tristate "Fintek F71858FG, F71862FG, F71882FG and F8000"
+ tristate "Fintek F71858FG, F71862FG, F71882FG, F71889FG and F8000"
depends on EXPERIMENTAL
help
If you say yes here you get support for hardware monitoring
- features of the Fintek F71858FG, F71862FG/71863FG, F71882FG/F71883FG
- and F8000 Super-I/O chips.
+ features of the Fintek F71858FG, F71862FG/71863FG, F71882FG/F71883FG,
+ F71889FG and F8000 Super-I/O chips.
This driver can also be built as a module. If so, the module
will be called f71882fg.
@@ -442,6 +448,15 @@
This driver can also be built as a module. If so, the module
will be called lm70.
+config SENSORS_LM73
+ tristate "National Semiconductor LM73"
+ depends on I2C
+ help
+ If you say yes here you get support for National Semiconductor LM73
+ sensor chips.
+ This driver can also be built as a module. If so, the module
+ will be called lm73.
+
config SENSORS_LM75
tristate "National Semiconductor LM75 and compatibles"
depends on I2C
@@ -841,7 +856,7 @@
config SENSORS_W83791D
tristate "Winbond W83791D"
- depends on I2C && EXPERIMENTAL
+ depends on I2C
select HWMON_VID
help
If you say yes here you get support for the Winbond W83791D chip.
@@ -1008,6 +1023,12 @@
Say Y here if you have an applicable laptop and want to experience
the awesome power of applesmc.
+config SENSORS_MC13783_ADC
+ tristate "Freescale MC13783 ADC"
+ depends on MFD_MC13783
+ help
+ Support for the A/D converter on MC13783 PMIC.
+
if ACPI
comment "ACPI drivers"
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 9f46cb0..33c2ee1 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -57,6 +57,7 @@
obj-$(CONFIG_SENSORS_LIS3_SPI) += lis3lv02d.o lis3lv02d_spi.o
obj-$(CONFIG_SENSORS_LM63) += lm63.o
obj-$(CONFIG_SENSORS_LM70) += lm70.o
+obj-$(CONFIG_SENSORS_LM73) += lm73.o
obj-$(CONFIG_SENSORS_LM75) += lm75.o
obj-$(CONFIG_SENSORS_LM77) += lm77.o
obj-$(CONFIG_SENSORS_LM78) += lm78.o
@@ -73,6 +74,7 @@
obj-$(CONFIG_SENSORS_MAX1111) += max1111.o
obj-$(CONFIG_SENSORS_MAX1619) += max1619.o
obj-$(CONFIG_SENSORS_MAX6650) += max6650.o
+obj-$(CONFIG_SENSORS_MC13783_ADC)+= mc13783-adc.o
obj-$(CONFIG_SENSORS_PC87360) += pc87360.o
obj-$(CONFIG_SENSORS_PC87427) += pc87427.o
obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o
diff --git a/drivers/hwmon/adm1021.c b/drivers/hwmon/adm1021.c
index afc5943..33acf29 100644
--- a/drivers/hwmon/adm1021.c
+++ b/drivers/hwmon/adm1021.c
@@ -288,9 +288,8 @@
struct i2c_board_info *info)
{
struct i2c_adapter *adapter = client->adapter;
- int i;
- const char *type_name = "";
- int conv_rate, status, config;
+ const char *type_name;
+ int conv_rate, status, config, man_id, dev_id;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
pr_debug("adm1021: detect failed, "
@@ -303,62 +302,37 @@
ADM1021_REG_CONV_RATE_R);
config = i2c_smbus_read_byte_data(client, ADM1021_REG_CONFIG_R);
- /* Now, we do the remaining detection. */
- if (kind < 0) {
- if ((status & 0x03) != 0x00 || (config & 0x3F) != 0x00
- || (conv_rate & 0xF8) != 0x00) {
- pr_debug("adm1021: detect failed, "
- "chip not detected!\n");
- return -ENODEV;
- }
+ /* Check unused bits */
+ if ((status & 0x03) || (config & 0x3F) || (conv_rate & 0xF8)) {
+ pr_debug("adm1021: detect failed, chip not detected!\n");
+ return -ENODEV;
}
/* Determine the chip type. */
- if (kind <= 0) {
- i = i2c_smbus_read_byte_data(client, ADM1021_REG_MAN_ID);
- if (i == 0x41)
- if ((i2c_smbus_read_byte_data(client,
- ADM1021_REG_DEV_ID) & 0xF0) == 0x30)
- kind = adm1023;
- else
- kind = adm1021;
- else if (i == 0x49)
- kind = thmc10;
- else if (i == 0x23)
- kind = gl523sm;
- else if ((i == 0x4d) &&
- (i2c_smbus_read_byte_data(client,
- ADM1021_REG_DEV_ID) == 0x01))
- kind = max1617a;
- else if (i == 0x54)
- kind = mc1066;
- /* LM84 Mfr ID in a different place, and it has more unused bits */
- else if (conv_rate == 0x00
- && (kind == 0 /* skip extra detection */
- || ((config & 0x7F) == 0x00
- && (status & 0xAB) == 0x00)))
- kind = lm84;
- else
- kind = max1617;
- }
+ man_id = i2c_smbus_read_byte_data(client, ADM1021_REG_MAN_ID);
+ dev_id = i2c_smbus_read_byte_data(client, ADM1021_REG_DEV_ID);
- if (kind == max1617) {
- type_name = "max1617";
- } else if (kind == max1617a) {
+ if (man_id == 0x4d && dev_id == 0x01)
type_name = "max1617a";
- } else if (kind == adm1021) {
- type_name = "adm1021";
- } else if (kind == adm1023) {
- type_name = "adm1023";
- } else if (kind == thmc10) {
+ else if (man_id == 0x41) {
+ if ((dev_id & 0xF0) == 0x30)
+ type_name = "adm1023";
+ else
+ type_name = "adm1021";
+ } else if (man_id == 0x49)
type_name = "thmc10";
- } else if (kind == lm84) {
- type_name = "lm84";
- } else if (kind == gl523sm) {
+ else if (man_id == 0x23)
type_name = "gl523sm";
- } else if (kind == mc1066) {
+ else if (man_id == 0x54)
type_name = "mc1066";
- }
+ /* LM84 Mfr ID in a different place, and it has more unused bits */
+ else if (conv_rate == 0x00
+ && (config & 0x7F) == 0x00
+ && (status & 0xAB) == 0x00)
+ type_name = "lm84";
+ else
+ type_name = "max1617";
+
pr_debug("adm1021: Detected chip %s at adapter %d, address 0x%02x.\n",
type_name, i2c_adapter_id(adapter), client->addr);
strlcpy(info->type, type_name, I2C_NAME_SIZE);
diff --git a/drivers/hwmon/adm1025.c b/drivers/hwmon/adm1025.c
index 4db04d6..db6ac2b 100644
--- a/drivers/hwmon/adm1025.c
+++ b/drivers/hwmon/adm1025.c
@@ -2,7 +2,7 @@
* adm1025.c
*
* Copyright (C) 2000 Chen-Yuan Wu <gwu@esoft.com>
- * Copyright (C) 2003-2008 Jean Delvare <khali@linux-fr.org>
+ * Copyright (C) 2003-2009 Jean Delvare <khali@linux-fr.org>
*
* The ADM1025 is a sensor chip made by Analog Devices. It reports up to 6
* voltages (including its own power source) and up to two temperatures
@@ -413,67 +413,34 @@
struct i2c_board_info *info)
{
struct i2c_adapter *adapter = client->adapter;
- const char *name = "";
- u8 config;
+ const char *name;
+ u8 man_id, chip_id;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -ENODEV;
- /*
- * Now we do the remaining detection. A negative kind means that
- * the driver was loaded with no force parameter (default), so we
- * must both detect and identify the chip. A zero kind means that
- * the driver was loaded with the force parameter, the detection
- * step shall be skipped. A positive kind means that the driver
- * was loaded with the force parameter and a given kind of chip is
- * requested, so both the detection and the identification steps
- * are skipped.
- */
- config = i2c_smbus_read_byte_data(client, ADM1025_REG_CONFIG);
- if (kind < 0) { /* detection */
- if ((config & 0x80) != 0x00
- || (i2c_smbus_read_byte_data(client,
- ADM1025_REG_STATUS1) & 0xC0) != 0x00
- || (i2c_smbus_read_byte_data(client,
- ADM1025_REG_STATUS2) & 0xBC) != 0x00) {
- dev_dbg(&adapter->dev,
- "ADM1025 detection failed at 0x%02x.\n",
- client->addr);
- return -ENODEV;
- }
+ /* Check for unused bits */
+ if ((i2c_smbus_read_byte_data(client, ADM1025_REG_CONFIG) & 0x80)
+ || (i2c_smbus_read_byte_data(client, ADM1025_REG_STATUS1) & 0xC0)
+ || (i2c_smbus_read_byte_data(client, ADM1025_REG_STATUS2) & 0xBC)) {
+ dev_dbg(&adapter->dev, "ADM1025 detection failed at 0x%02x\n",
+ client->addr);
+ return -ENODEV;
}
- if (kind <= 0) { /* identification */
- u8 man_id, chip_id;
+ /* Identification */
+ chip_id = i2c_smbus_read_byte_data(client, ADM1025_REG_CHIP_ID);
+ if ((chip_id & 0xF0) != 0x20)
+ return -ENODEV;
- man_id = i2c_smbus_read_byte_data(client, ADM1025_REG_MAN_ID);
- chip_id = i2c_smbus_read_byte_data(client, ADM1025_REG_CHIP_ID);
-
- if (man_id == 0x41) { /* Analog Devices */
- if ((chip_id & 0xF0) == 0x20) { /* ADM1025/ADM1025A */
- kind = adm1025;
- }
- } else
- if (man_id == 0xA1) { /* Philips */
- if (client->addr != 0x2E
- && (chip_id & 0xF0) == 0x20) { /* NE1619 */
- kind = ne1619;
- }
- }
-
- if (kind <= 0) { /* identification failed */
- dev_info(&adapter->dev,
- "Unsupported chip (man_id=0x%02X, "
- "chip_id=0x%02X).\n", man_id, chip_id);
- return -ENODEV;
- }
- }
-
- if (kind == adm1025) {
+ man_id = i2c_smbus_read_byte_data(client, ADM1025_REG_MAN_ID);
+ if (man_id == 0x41)
name = "adm1025";
- } else if (kind == ne1619) {
+ else if (man_id == 0xA1 && client->addr != 0x2E)
name = "ne1619";
- }
+ else
+ return -ENODEV;
+
strlcpy(info->type, name, I2C_NAME_SIZE);
return 0;
diff --git a/drivers/hwmon/adm1026.c b/drivers/hwmon/adm1026.c
index ff7de40..fb53639 100644
--- a/drivers/hwmon/adm1026.c
+++ b/drivers/hwmon/adm1026.c
@@ -1672,35 +1672,26 @@
i2c_adapter_id(client->adapter), client->addr,
company, verstep);
- /* If auto-detecting, Determine the chip type. */
- if (kind <= 0) {
- dev_dbg(&adapter->dev, "Autodetecting device at %d,0x%02x "
- "...\n", i2c_adapter_id(adapter), address);
- if (company == ADM1026_COMPANY_ANALOG_DEV
- && verstep == ADM1026_VERSTEP_ADM1026) {
- kind = adm1026;
- } else if (company == ADM1026_COMPANY_ANALOG_DEV
- && (verstep & 0xf0) == ADM1026_VERSTEP_GENERIC) {
- dev_err(&adapter->dev, "Unrecognized stepping "
- "0x%02x. Defaulting to ADM1026.\n", verstep);
- kind = adm1026;
- } else if ((verstep & 0xf0) == ADM1026_VERSTEP_GENERIC) {
- dev_err(&adapter->dev, "Found version/stepping "
- "0x%02x. Assuming generic ADM1026.\n",
- verstep);
- kind = any_chip;
- } else {
- dev_dbg(&adapter->dev, "Autodetection failed\n");
- /* Not an ADM1026 ... */
- if (kind == 0) { /* User used force=x,y */
- dev_err(&adapter->dev, "Generic ADM1026 not "
- "found at %d,0x%02x. Try "
- "force_adm1026.\n",
- i2c_adapter_id(adapter), address);
- }
- return -ENODEV;
- }
+ /* Determine the chip type. */
+ dev_dbg(&adapter->dev, "Autodetecting device at %d,0x%02x...\n",
+ i2c_adapter_id(adapter), address);
+ if (company == ADM1026_COMPANY_ANALOG_DEV
+ && verstep == ADM1026_VERSTEP_ADM1026) {
+ /* Analog Devices ADM1026 */
+ } else if (company == ADM1026_COMPANY_ANALOG_DEV
+ && (verstep & 0xf0) == ADM1026_VERSTEP_GENERIC) {
+ dev_err(&adapter->dev, "Unrecognized stepping "
+ "0x%02x. Defaulting to ADM1026.\n", verstep);
+ } else if ((verstep & 0xf0) == ADM1026_VERSTEP_GENERIC) {
+ dev_err(&adapter->dev, "Found version/stepping "
+ "0x%02x. Assuming generic ADM1026.\n",
+ verstep);
+ } else {
+ dev_dbg(&adapter->dev, "Autodetection failed\n");
+ /* Not an ADM1026... */
+ return -ENODEV;
}
+
strlcpy(info->type, "adm1026", I2C_NAME_SIZE);
return 0;
diff --git a/drivers/hwmon/adm1029.c b/drivers/hwmon/adm1029.c
index 3671815..ef91e2a4 100644
--- a/drivers/hwmon/adm1029.c
+++ b/drivers/hwmon/adm1029.c
@@ -301,59 +301,36 @@
struct i2c_board_info *info)
{
struct i2c_adapter *adapter = client->adapter;
+ u8 man_id, chip_id, temp_devices_installed, nb_fan_support;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -ENODEV;
- /* Now we do the detection and identification. A negative kind
- * means that the driver was loaded with no force parameter
- * (default), so we must both detect and identify the chip
- * (actually there is only one possible kind of chip for now, adm1029).
- * A zero kind means that the driver was loaded with the force
- * parameter, the detection step shall be skipped. A positive kind
- * means that the driver was loaded with the force parameter and a
- * given kind of chip is requested, so both the detection and the
- * identification steps are skipped. */
-
- /* Default to an adm1029 if forced */
- if (kind == 0)
- kind = adm1029;
-
/* ADM1029 doesn't have CHIP ID, check just MAN ID
* For better detection we check also ADM1029_TEMP_DEVICES_INSTALLED,
* ADM1029_REG_NB_FAN_SUPPORT and compare it with possible values
* documented
*/
- if (kind <= 0) { /* identification */
- u8 man_id, chip_id, temp_devices_installed, nb_fan_support;
-
- man_id = i2c_smbus_read_byte_data(client, ADM1029_REG_MAN_ID);
- chip_id = i2c_smbus_read_byte_data(client, ADM1029_REG_CHIP_ID);
- temp_devices_installed = i2c_smbus_read_byte_data(client,
+ man_id = i2c_smbus_read_byte_data(client, ADM1029_REG_MAN_ID);
+ chip_id = i2c_smbus_read_byte_data(client, ADM1029_REG_CHIP_ID);
+ temp_devices_installed = i2c_smbus_read_byte_data(client,
ADM1029_REG_TEMP_DEVICES_INSTALLED);
- nb_fan_support = i2c_smbus_read_byte_data(client,
+ nb_fan_support = i2c_smbus_read_byte_data(client,
ADM1029_REG_NB_FAN_SUPPORT);
- /* 0x41 is Analog Devices */
- if (man_id == 0x41 && (temp_devices_installed & 0xf9) == 0x01
- && nb_fan_support == 0x03) {
- if ((chip_id & 0xF0) == 0x00) {
- kind = adm1029;
- } else {
- /* There are no "official" CHIP ID, so actually
- * we use Major/Minor revision for that */
- printk(KERN_INFO
- "adm1029: Unknown major revision %x, "
- "please let us know\n", chip_id);
- }
- }
+ /* 0x41 is Analog Devices */
+ if (man_id != 0x41 || (temp_devices_installed & 0xf9) != 0x01
+ || nb_fan_support != 0x03)
+ return -ENODEV;
- if (kind <= 0) { /* identification failed */
- pr_debug("adm1029: Unsupported chip (man_id=0x%02X, "
- "chip_id=0x%02X)\n", man_id, chip_id);
- return -ENODEV;
- }
+ if ((chip_id & 0xF0) != 0x00) {
+ /* There are no "official" CHIP ID, so actually
+ * we use Major/Minor revision for that */
+ pr_info("adm1029: Unknown major revision %x, "
+ "please let us know\n", chip_id);
+ return -ENODEV;
}
+
strlcpy(info->type, "adm1029", I2C_NAME_SIZE);
return 0;
@@ -432,7 +409,7 @@
}
/*
-function that update the status of the chips (temperature for exemple)
+function that update the status of the chips (temperature for example)
*/
static struct adm1029_data *adm1029_update_device(struct device *dev)
{
diff --git a/drivers/hwmon/adm1031.c b/drivers/hwmon/adm1031.c
index 5690595..0e72217 100644
--- a/drivers/hwmon/adm1031.c
+++ b/drivers/hwmon/adm1031.c
@@ -817,31 +817,19 @@
struct i2c_board_info *info)
{
struct i2c_adapter *adapter = client->adapter;
- const char *name = "";
+ const char *name;
+ int id, co;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -ENODEV;
- if (kind < 0) {
- int id, co;
- id = i2c_smbus_read_byte_data(client, 0x3d);
- co = i2c_smbus_read_byte_data(client, 0x3e);
+ id = i2c_smbus_read_byte_data(client, 0x3d);
+ co = i2c_smbus_read_byte_data(client, 0x3e);
- if (!((id == 0x31 || id == 0x30) && co == 0x41))
- return -ENODEV;
- kind = (id == 0x30) ? adm1030 : adm1031;
- }
+ if (!((id == 0x31 || id == 0x30) && co == 0x41))
+ return -ENODEV;
+ name = (id == 0x30) ? "adm1030" : "adm1031";
- if (kind <= 0)
- kind = adm1031;
-
- /* Given the detected chip type, set the chip name and the
- * auto fan control helper table. */
- if (kind == adm1030) {
- name = "adm1030";
- } else if (kind == adm1031) {
- name = "adm1031";
- }
strlcpy(info->type, name, I2C_NAME_SIZE);
return 0;
diff --git a/drivers/hwmon/adm9240.c b/drivers/hwmon/adm9240.c
index 2444b15..20e0481 100644
--- a/drivers/hwmon/adm9240.c
+++ b/drivers/hwmon/adm9240.c
@@ -556,51 +556,34 @@
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -ENODEV;
- if (kind == 0) {
- kind = adm9240;
+ /* verify chip: reg address should match i2c address */
+ if (i2c_smbus_read_byte_data(new_client, ADM9240_REG_I2C_ADDR)
+ != address) {
+ dev_err(&adapter->dev, "detect fail: address match, 0x%02x\n",
+ address);
+ return -ENODEV;
}
- if (kind < 0) {
-
- /* verify chip: reg address should match i2c address */
- if (i2c_smbus_read_byte_data(new_client, ADM9240_REG_I2C_ADDR)
- != address) {
- dev_err(&adapter->dev, "detect fail: address match, "
- "0x%02x\n", address);
- return -ENODEV;
- }
-
- /* check known chip manufacturer */
- man_id = i2c_smbus_read_byte_data(new_client,
- ADM9240_REG_MAN_ID);
- if (man_id == 0x23) {
- kind = adm9240;
- } else if (man_id == 0xda) {
- kind = ds1780;
- } else if (man_id == 0x01) {
- kind = lm81;
- } else {
- dev_err(&adapter->dev, "detect fail: unknown manuf, "
- "0x%02x\n", man_id);
- return -ENODEV;
- }
-
- /* successful detect, print chip info */
- die_rev = i2c_smbus_read_byte_data(new_client,
- ADM9240_REG_DIE_REV);
- dev_info(&adapter->dev, "found %s revision %u\n",
- man_id == 0x23 ? "ADM9240" :
- man_id == 0xda ? "DS1780" : "LM81", die_rev);
- }
-
- /* either forced or detected chip kind */
- if (kind == adm9240) {
+ /* check known chip manufacturer */
+ man_id = i2c_smbus_read_byte_data(new_client, ADM9240_REG_MAN_ID);
+ if (man_id == 0x23) {
name = "adm9240";
- } else if (kind == ds1780) {
+ } else if (man_id == 0xda) {
name = "ds1780";
- } else if (kind == lm81) {
+ } else if (man_id == 0x01) {
name = "lm81";
+ } else {
+ dev_err(&adapter->dev, "detect fail: unknown manuf, 0x%02x\n",
+ man_id);
+ return -ENODEV;
}
+
+ /* successful detect, print chip info */
+ die_rev = i2c_smbus_read_byte_data(new_client, ADM9240_REG_DIE_REV);
+ dev_info(&adapter->dev, "found %s revision %u\n",
+ man_id == 0x23 ? "ADM9240" :
+ man_id == 0xda ? "DS1780" : "LM81", die_rev);
+
strlcpy(info->type, name, I2C_NAME_SIZE);
return 0;
diff --git a/drivers/hwmon/ads7828.c b/drivers/hwmon/ads7828.c
index 5c39b4a..451977b 100644
--- a/drivers/hwmon/ads7828.c
+++ b/drivers/hwmon/ads7828.c
@@ -191,6 +191,7 @@
struct i2c_board_info *info)
{
struct i2c_adapter *adapter = client->adapter;
+ int ch;
/* Check we have a valid client */
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_WORD_DATA))
@@ -202,20 +203,17 @@
- Read from the 8 channel addresses
- Check the top 4 bits of each result are not set (12 data bits)
*/
- if (kind < 0) {
- int ch;
- for (ch = 0; ch < ADS7828_NCH; ch++) {
- u16 in_data;
- u8 cmd = channel_cmd_byte(ch);
- in_data = ads7828_read_value(client, cmd);
- if (in_data & 0xF000) {
- printk(KERN_DEBUG
- "%s : Doesn't look like an ads7828 device\n",
- __func__);
- return -ENODEV;
- }
+ for (ch = 0; ch < ADS7828_NCH; ch++) {
+ u16 in_data;
+ u8 cmd = channel_cmd_byte(ch);
+ in_data = ads7828_read_value(client, cmd);
+ if (in_data & 0xF000) {
+ pr_debug("%s : Doesn't look like an ads7828 device\n",
+ __func__);
+ return -ENODEV;
}
}
+
strlcpy(info->type, "ads7828", I2C_NAME_SIZE);
return 0;
diff --git a/drivers/hwmon/adt7462.c b/drivers/hwmon/adt7462.c
index 1852f27..f9c9562 100644
--- a/drivers/hwmon/adt7462.c
+++ b/drivers/hwmon/adt7462.c
@@ -1906,27 +1906,22 @@
struct i2c_board_info *info)
{
struct i2c_adapter *adapter = client->adapter;
+ int vendor, device, revision;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -ENODEV;
- if (kind <= 0) {
- int vendor, device, revision;
+ vendor = i2c_smbus_read_byte_data(client, ADT7462_REG_VENDOR);
+ if (vendor != ADT7462_VENDOR)
+ return -ENODEV;
- vendor = i2c_smbus_read_byte_data(client, ADT7462_REG_VENDOR);
- if (vendor != ADT7462_VENDOR)
- return -ENODEV;
+ device = i2c_smbus_read_byte_data(client, ADT7462_REG_DEVICE);
+ if (device != ADT7462_DEVICE)
+ return -ENODEV;
- device = i2c_smbus_read_byte_data(client, ADT7462_REG_DEVICE);
- if (device != ADT7462_DEVICE)
- return -ENODEV;
-
- revision = i2c_smbus_read_byte_data(client,
- ADT7462_REG_REVISION);
- if (revision != ADT7462_REVISION)
- return -ENODEV;
- } else
- dev_dbg(&adapter->dev, "detection forced\n");
+ revision = i2c_smbus_read_byte_data(client, ADT7462_REG_REVISION);
+ if (revision != ADT7462_REVISION)
+ return -ENODEV;
strlcpy(info->type, "adt7462", I2C_NAME_SIZE);
diff --git a/drivers/hwmon/adt7470.c b/drivers/hwmon/adt7470.c
index 633e1a1..32b1750 100644
--- a/drivers/hwmon/adt7470.c
+++ b/drivers/hwmon/adt7470.c
@@ -1229,27 +1229,22 @@
struct i2c_board_info *info)
{
struct i2c_adapter *adapter = client->adapter;
+ int vendor, device, revision;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -ENODEV;
- if (kind <= 0) {
- int vendor, device, revision;
+ vendor = i2c_smbus_read_byte_data(client, ADT7470_REG_VENDOR);
+ if (vendor != ADT7470_VENDOR)
+ return -ENODEV;
- vendor = i2c_smbus_read_byte_data(client, ADT7470_REG_VENDOR);
- if (vendor != ADT7470_VENDOR)
- return -ENODEV;
+ device = i2c_smbus_read_byte_data(client, ADT7470_REG_DEVICE);
+ if (device != ADT7470_DEVICE)
+ return -ENODEV;
- device = i2c_smbus_read_byte_data(client, ADT7470_REG_DEVICE);
- if (device != ADT7470_DEVICE)
- return -ENODEV;
-
- revision = i2c_smbus_read_byte_data(client,
- ADT7470_REG_REVISION);
- if (revision != ADT7470_REVISION)
- return -ENODEV;
- } else
- dev_dbg(&adapter->dev, "detection forced\n");
+ revision = i2c_smbus_read_byte_data(client, ADT7470_REG_REVISION);
+ if (revision != ADT7470_REVISION)
+ return -ENODEV;
strlcpy(info->type, "adt7470", I2C_NAME_SIZE);
diff --git a/drivers/hwmon/adt7473.c b/drivers/hwmon/adt7473.c
index 0a6ce23..aea244d 100644
--- a/drivers/hwmon/adt7473.c
+++ b/drivers/hwmon/adt7473.c
@@ -174,7 +174,6 @@
{ "adt7473", adt7473 },
{ }
};
-MODULE_DEVICE_TABLE(i2c, adt7473_id);
static struct i2c_driver adt7473_driver = {
.class = I2C_CLASS_HWMON,
@@ -1090,27 +1089,22 @@
struct i2c_board_info *info)
{
struct i2c_adapter *adapter = client->adapter;
+ int vendor, device, revision;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -ENODEV;
- if (kind <= 0) {
- int vendor, device, revision;
+ vendor = i2c_smbus_read_byte_data(client, ADT7473_REG_VENDOR);
+ if (vendor != ADT7473_VENDOR)
+ return -ENODEV;
- vendor = i2c_smbus_read_byte_data(client, ADT7473_REG_VENDOR);
- if (vendor != ADT7473_VENDOR)
- return -ENODEV;
+ device = i2c_smbus_read_byte_data(client, ADT7473_REG_DEVICE);
+ if (device != ADT7473_DEVICE)
+ return -ENODEV;
- device = i2c_smbus_read_byte_data(client, ADT7473_REG_DEVICE);
- if (device != ADT7473_DEVICE)
- return -ENODEV;
-
- revision = i2c_smbus_read_byte_data(client,
- ADT7473_REG_REVISION);
- if (revision != ADT7473_REV_68 && revision != ADT7473_REV_69)
- return -ENODEV;
- } else
- dev_dbg(&adapter->dev, "detection forced\n");
+ revision = i2c_smbus_read_byte_data(client, ADT7473_REG_REVISION);
+ if (revision != ADT7473_REV_68 && revision != ADT7473_REV_69)
+ return -ENODEV;
strlcpy(info->type, "adt7473", I2C_NAME_SIZE);
@@ -1171,6 +1165,8 @@
static int __init adt7473_init(void)
{
+ pr_notice("The adt7473 driver is deprecated, please use the adt7475 "
+ "driver instead\n");
return i2c_add_driver(&adt7473_driver);
}
diff --git a/drivers/hwmon/adt7475.c b/drivers/hwmon/adt7475.c
index b5a9519..99abfdd 100644
--- a/drivers/hwmon/adt7475.c
+++ b/drivers/hwmon/adt7475.c
@@ -3,7 +3,8 @@
* Copyright (C) 2007-2008, Advanced Micro Devices, Inc.
* Copyright (C) 2008 Jordan Crouse <jordan@cosmicpenguin.net>
* Copyright (C) 2008 Hans de Goede <hdegoede@redhat.com>
-
+ * Copyright (C) 2009 Jean Delvare <khali@linux-fr.org>
+ *
* Derived from the lm83 driver by Jean Delvare
*
* This program is free software; you can redistribute it and/or modify
@@ -17,6 +18,7 @@
#include <linux/i2c.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
+#include <linux/hwmon-vid.h>
#include <linux/err.h>
/* Indexes for the sysfs hooks */
@@ -39,7 +41,12 @@
/* 7475 Common Registers */
-#define REG_VOLTAGE_BASE 0x21
+#define REG_DEVREV2 0x12 /* ADT7490 only */
+
+#define REG_VTT 0x1E /* ADT7490 only */
+#define REG_EXTEND3 0x1F /* ADT7490 only */
+
+#define REG_VOLTAGE_BASE 0x20
#define REG_TEMP_BASE 0x25
#define REG_TACH_BASE 0x28
#define REG_PWM_BASE 0x30
@@ -47,12 +54,15 @@
#define REG_DEVID 0x3D
#define REG_VENDID 0x3E
+#define REG_DEVID2 0x3F
#define REG_STATUS1 0x41
#define REG_STATUS2 0x42
-#define REG_VOLTAGE_MIN_BASE 0x46
-#define REG_VOLTAGE_MAX_BASE 0x47
+#define REG_VID 0x43 /* ADT7476 only */
+
+#define REG_VOLTAGE_MIN_BASE 0x44
+#define REG_VOLTAGE_MAX_BASE 0x45
#define REG_TEMP_MIN_BASE 0x4E
#define REG_TEMP_MAX_BASE 0x4F
@@ -73,16 +83,39 @@
#define REG_TEMP_OFFSET_BASE 0x70
+#define REG_CONFIG2 0x73
+
#define REG_EXTEND1 0x76
#define REG_EXTEND2 0x77
+
+#define REG_CONFIG3 0x78
#define REG_CONFIG5 0x7C
+#define REG_CONFIG4 0x7D
+
+#define REG_STATUS4 0x81 /* ADT7490 only */
+
+#define REG_VTT_MIN 0x84 /* ADT7490 only */
+#define REG_VTT_MAX 0x86 /* ADT7490 only */
+
+#define VID_VIDSEL 0x80 /* ADT7476 only */
+
+#define CONFIG2_ATTN 0x20
+
+#define CONFIG3_SMBALERT 0x01
+#define CONFIG3_THERM 0x02
+
+#define CONFIG4_PINFUNC 0x03
+#define CONFIG4_MAXDUTY 0x08
+#define CONFIG4_ATTN_IN10 0x30
+#define CONFIG4_ATTN_IN43 0xC0
#define CONFIG5_TWOSCOMP 0x01
#define CONFIG5_TEMPOFFSET 0x02
+#define CONFIG5_VIDGPIO 0x10 /* ADT7476 only */
/* ADT7475 Settings */
-#define ADT7475_VOLTAGE_COUNT 2
+#define ADT7475_VOLTAGE_COUNT 5 /* Not counting Vtt */
#define ADT7475_TEMP_COUNT 3
#define ADT7475_TACH_COUNT 4
#define ADT7475_PWM_COUNT 3
@@ -113,12 +146,15 @@
#define TEMP_OFFSET_REG(idx) (REG_TEMP_OFFSET_BASE + (idx))
#define TEMP_TRANGE_REG(idx) (REG_TEMP_TRANGE_BASE + (idx))
-static unsigned short normal_i2c[] = { 0x2e, I2C_CLIENT_END };
+static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
-I2C_CLIENT_INSMOD_1(adt7475);
+I2C_CLIENT_INSMOD_4(adt7473, adt7475, adt7476, adt7490);
static const struct i2c_device_id adt7475_id[] = {
+ { "adt7473", adt7473 },
{ "adt7475", adt7475 },
+ { "adt7476", adt7476 },
+ { "adt7490", adt7490 },
{ }
};
MODULE_DEVICE_TABLE(i2c, adt7475_id);
@@ -131,15 +167,24 @@
unsigned long limits_updated;
char valid;
+ u8 config4;
u8 config5;
- u16 alarms;
- u16 voltage[3][3];
+ u8 has_voltage;
+ u8 bypass_attn; /* Bypass voltage attenuator */
+ u8 has_pwm2:1;
+ u8 has_fan4:1;
+ u8 has_vid:1;
+ u32 alarms;
+ u16 voltage[3][6];
u16 temp[7][3];
u16 tach[2][4];
u8 pwm[4][3];
u8 range[3];
u8 pwmctl[3];
u8 pwmchan[3];
+
+ u8 vid;
+ u8 vrm;
};
static struct i2c_driver adt7475_driver;
@@ -196,26 +241,35 @@
return SENSORS_LIMIT((90000 * 60) / rpm, 1, 0xFFFF);
}
-static inline int reg2vcc(u16 reg)
+/* Scaling factors for voltage inputs, taken from the ADT7490 datasheet */
+static const int adt7473_in_scaling[ADT7475_VOLTAGE_COUNT + 1][2] = {
+ { 45, 94 }, /* +2.5V */
+ { 175, 525 }, /* Vccp */
+ { 68, 71 }, /* Vcc */
+ { 93, 47 }, /* +5V */
+ { 120, 20 }, /* +12V */
+ { 45, 45 }, /* Vtt */
+};
+
+static inline int reg2volt(int channel, u16 reg, u8 bypass_attn)
{
- return (4296 * reg) / 1000;
+ const int *r = adt7473_in_scaling[channel];
+
+ if (bypass_attn & (1 << channel))
+ return DIV_ROUND_CLOSEST(reg * 2250, 1024);
+ return DIV_ROUND_CLOSEST(reg * (r[0] + r[1]) * 2250, r[1] * 1024);
}
-static inline int reg2vccp(u16 reg)
+static inline u16 volt2reg(int channel, long volt, u8 bypass_attn)
{
- return (2929 * reg) / 1000;
-}
+ const int *r = adt7473_in_scaling[channel];
+ long reg;
-static inline u16 vcc2reg(long vcc)
-{
- vcc = SENSORS_LIMIT(vcc, 0, 4396);
- return (vcc * 1000) / 4296;
-}
-
-static inline u16 vccp2reg(long vcc)
-{
- vcc = SENSORS_LIMIT(vcc, 0, 2998);
- return (vcc * 1000) / 2929;
+ if (bypass_attn & (1 << channel))
+ reg = (volt * 1024) / 2250;
+ else
+ reg = (volt * r[1] * 1024) / ((r[0] + r[1]) * 2250);
+ return SENSORS_LIMIT(reg, 0, 1023) & (0xff << 2);
}
static u16 adt7475_read_word(struct i2c_client *client, int reg)
@@ -271,12 +325,11 @@
switch (sattr->nr) {
case ALARM:
return sprintf(buf, "%d\n",
- (data->alarms >> (sattr->index + 1)) & 1);
+ (data->alarms >> sattr->index) & 1);
default:
val = data->voltage[sattr->nr][sattr->index];
return sprintf(buf, "%d\n",
- sattr->index ==
- 0 ? reg2vccp(val) : reg2vcc(val));
+ reg2volt(sattr->index, val, data->bypass_attn));
}
}
@@ -296,12 +349,19 @@
mutex_lock(&data->lock);
data->voltage[sattr->nr][sattr->index] =
- sattr->index ? vcc2reg(val) : vccp2reg(val);
+ volt2reg(sattr->index, val, data->bypass_attn);
- if (sattr->nr == MIN)
- reg = VOLTAGE_MIN_REG(sattr->index);
- else
- reg = VOLTAGE_MAX_REG(sattr->index);
+ if (sattr->index < ADT7475_VOLTAGE_COUNT) {
+ if (sattr->nr == MIN)
+ reg = VOLTAGE_MIN_REG(sattr->index);
+ else
+ reg = VOLTAGE_MAX_REG(sattr->index);
+ } else {
+ if (sattr->nr == MIN)
+ reg = REG_VTT_MIN;
+ else
+ reg = REG_VTT_MAX;
+ }
i2c_smbus_write_byte_data(client, reg,
data->voltage[sattr->nr][sattr->index] >> 2);
@@ -778,18 +838,103 @@
return count;
}
-static SENSOR_DEVICE_ATTR_2(in1_input, S_IRUGO, show_voltage, NULL, INPUT, 0);
-static SENSOR_DEVICE_ATTR_2(in1_max, S_IRUGO | S_IWUSR, show_voltage,
+static ssize_t show_pwm_at_crit(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ struct adt7475_data *data = adt7475_update_device(dev);
+ return sprintf(buf, "%d\n", !!(data->config4 & CONFIG4_MAXDUTY));
+}
+
+static ssize_t set_pwm_at_crit(struct device *dev,
+ struct device_attribute *devattr,
+ const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct adt7475_data *data = i2c_get_clientdata(client);
+ long val;
+
+ if (strict_strtol(buf, 10, &val))
+ return -EINVAL;
+ if (val != 0 && val != 1)
+ return -EINVAL;
+
+ mutex_lock(&data->lock);
+ data->config4 = i2c_smbus_read_byte_data(client, REG_CONFIG4);
+ if (val)
+ data->config4 |= CONFIG4_MAXDUTY;
+ else
+ data->config4 &= ~CONFIG4_MAXDUTY;
+ i2c_smbus_write_byte_data(client, REG_CONFIG4, data->config4);
+ mutex_unlock(&data->lock);
+
+ return count;
+}
+
+static ssize_t show_vrm(struct device *dev, struct device_attribute *devattr,
+ char *buf)
+{
+ struct adt7475_data *data = dev_get_drvdata(dev);
+ return sprintf(buf, "%d\n", (int)data->vrm);
+}
+
+static ssize_t set_vrm(struct device *dev, struct device_attribute *devattr,
+ const char *buf, size_t count)
+{
+ struct adt7475_data *data = dev_get_drvdata(dev);
+ long val;
+
+ if (strict_strtol(buf, 10, &val))
+ return -EINVAL;
+ if (val < 0 || val > 255)
+ return -EINVAL;
+ data->vrm = val;
+
+ return count;
+}
+
+static ssize_t show_vid(struct device *dev, struct device_attribute *devattr,
+ char *buf)
+{
+ struct adt7475_data *data = adt7475_update_device(dev);
+ return sprintf(buf, "%d\n", vid_from_reg(data->vid, data->vrm));
+}
+
+static SENSOR_DEVICE_ATTR_2(in0_input, S_IRUGO, show_voltage, NULL, INPUT, 0);
+static SENSOR_DEVICE_ATTR_2(in0_max, S_IRUGO | S_IWUSR, show_voltage,
set_voltage, MAX, 0);
-static SENSOR_DEVICE_ATTR_2(in1_min, S_IRUGO | S_IWUSR, show_voltage,
+static SENSOR_DEVICE_ATTR_2(in0_min, S_IRUGO | S_IWUSR, show_voltage,
set_voltage, MIN, 0);
-static SENSOR_DEVICE_ATTR_2(in1_alarm, S_IRUGO, show_voltage, NULL, ALARM, 0);
-static SENSOR_DEVICE_ATTR_2(in2_input, S_IRUGO, show_voltage, NULL, INPUT, 1);
-static SENSOR_DEVICE_ATTR_2(in2_max, S_IRUGO | S_IWUSR, show_voltage,
+static SENSOR_DEVICE_ATTR_2(in0_alarm, S_IRUGO, show_voltage, NULL, ALARM, 0);
+static SENSOR_DEVICE_ATTR_2(in1_input, S_IRUGO, show_voltage, NULL, INPUT, 1);
+static SENSOR_DEVICE_ATTR_2(in1_max, S_IRUGO | S_IWUSR, show_voltage,
set_voltage, MAX, 1);
-static SENSOR_DEVICE_ATTR_2(in2_min, S_IRUGO | S_IWUSR, show_voltage,
+static SENSOR_DEVICE_ATTR_2(in1_min, S_IRUGO | S_IWUSR, show_voltage,
set_voltage, MIN, 1);
-static SENSOR_DEVICE_ATTR_2(in2_alarm, S_IRUGO, show_voltage, NULL, ALARM, 1);
+static SENSOR_DEVICE_ATTR_2(in1_alarm, S_IRUGO, show_voltage, NULL, ALARM, 1);
+static SENSOR_DEVICE_ATTR_2(in2_input, S_IRUGO, show_voltage, NULL, INPUT, 2);
+static SENSOR_DEVICE_ATTR_2(in2_max, S_IRUGO | S_IWUSR, show_voltage,
+ set_voltage, MAX, 2);
+static SENSOR_DEVICE_ATTR_2(in2_min, S_IRUGO | S_IWUSR, show_voltage,
+ set_voltage, MIN, 2);
+static SENSOR_DEVICE_ATTR_2(in2_alarm, S_IRUGO, show_voltage, NULL, ALARM, 2);
+static SENSOR_DEVICE_ATTR_2(in3_input, S_IRUGO, show_voltage, NULL, INPUT, 3);
+static SENSOR_DEVICE_ATTR_2(in3_max, S_IRUGO | S_IWUSR, show_voltage,
+ set_voltage, MAX, 3);
+static SENSOR_DEVICE_ATTR_2(in3_min, S_IRUGO | S_IWUSR, show_voltage,
+ set_voltage, MIN, 3);
+static SENSOR_DEVICE_ATTR_2(in3_alarm, S_IRUGO, show_voltage, NULL, ALARM, 3);
+static SENSOR_DEVICE_ATTR_2(in4_input, S_IRUGO, show_voltage, NULL, INPUT, 4);
+static SENSOR_DEVICE_ATTR_2(in4_max, S_IRUGO | S_IWUSR, show_voltage,
+ set_voltage, MAX, 4);
+static SENSOR_DEVICE_ATTR_2(in4_min, S_IRUGO | S_IWUSR, show_voltage,
+ set_voltage, MIN, 4);
+static SENSOR_DEVICE_ATTR_2(in4_alarm, S_IRUGO, show_voltage, NULL, ALARM, 8);
+static SENSOR_DEVICE_ATTR_2(in5_input, S_IRUGO, show_voltage, NULL, INPUT, 5);
+static SENSOR_DEVICE_ATTR_2(in5_max, S_IRUGO | S_IWUSR, show_voltage,
+ set_voltage, MAX, 5);
+static SENSOR_DEVICE_ATTR_2(in5_min, S_IRUGO | S_IWUSR, show_voltage,
+ set_voltage, MIN, 5);
+static SENSOR_DEVICE_ATTR_2(in5_alarm, S_IRUGO, show_voltage, NULL, ALARM, 31);
static SENSOR_DEVICE_ATTR_2(temp1_input, S_IRUGO, show_temp, NULL, INPUT, 0);
static SENSOR_DEVICE_ATTR_2(temp1_alarm, S_IRUGO, show_temp, NULL, ALARM, 0);
static SENSOR_DEVICE_ATTR_2(temp1_fault, S_IRUGO, show_temp, NULL, FAULT, 0);
@@ -893,6 +1038,13 @@
static SENSOR_DEVICE_ATTR_2(pwm3_auto_point2_pwm, S_IRUGO | S_IWUSR, show_pwm,
set_pwm, MAX, 2);
+/* Non-standard name, might need revisiting */
+static DEVICE_ATTR(pwm_use_point2_pwm_at_crit, S_IWUSR | S_IRUGO,
+ show_pwm_at_crit, set_pwm_at_crit);
+
+static DEVICE_ATTR(vrm, S_IWUSR | S_IRUGO, show_vrm, set_vrm);
+static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid, NULL);
+
static struct attribute *adt7475_attrs[] = {
&sensor_dev_attr_in1_input.dev_attr.attr,
&sensor_dev_attr_in1_max.dev_attr.attr,
@@ -940,60 +1092,156 @@
&sensor_dev_attr_fan3_input.dev_attr.attr,
&sensor_dev_attr_fan3_min.dev_attr.attr,
&sensor_dev_attr_fan3_alarm.dev_attr.attr,
- &sensor_dev_attr_fan4_input.dev_attr.attr,
- &sensor_dev_attr_fan4_min.dev_attr.attr,
- &sensor_dev_attr_fan4_alarm.dev_attr.attr,
&sensor_dev_attr_pwm1.dev_attr.attr,
&sensor_dev_attr_pwm1_freq.dev_attr.attr,
&sensor_dev_attr_pwm1_enable.dev_attr.attr,
&sensor_dev_attr_pwm1_auto_channels_temp.dev_attr.attr,
&sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr,
&sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr,
- &sensor_dev_attr_pwm2.dev_attr.attr,
- &sensor_dev_attr_pwm2_freq.dev_attr.attr,
- &sensor_dev_attr_pwm2_enable.dev_attr.attr,
- &sensor_dev_attr_pwm2_auto_channels_temp.dev_attr.attr,
- &sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr,
- &sensor_dev_attr_pwm2_auto_point2_pwm.dev_attr.attr,
&sensor_dev_attr_pwm3.dev_attr.attr,
&sensor_dev_attr_pwm3_freq.dev_attr.attr,
&sensor_dev_attr_pwm3_enable.dev_attr.attr,
&sensor_dev_attr_pwm3_auto_channels_temp.dev_attr.attr,
&sensor_dev_attr_pwm3_auto_point1_pwm.dev_attr.attr,
&sensor_dev_attr_pwm3_auto_point2_pwm.dev_attr.attr,
+ &dev_attr_pwm_use_point2_pwm_at_crit.attr,
NULL,
};
-struct attribute_group adt7475_attr_group = { .attrs = adt7475_attrs };
+static struct attribute *fan4_attrs[] = {
+ &sensor_dev_attr_fan4_input.dev_attr.attr,
+ &sensor_dev_attr_fan4_min.dev_attr.attr,
+ &sensor_dev_attr_fan4_alarm.dev_attr.attr,
+ NULL
+};
+
+static struct attribute *pwm2_attrs[] = {
+ &sensor_dev_attr_pwm2.dev_attr.attr,
+ &sensor_dev_attr_pwm2_freq.dev_attr.attr,
+ &sensor_dev_attr_pwm2_enable.dev_attr.attr,
+ &sensor_dev_attr_pwm2_auto_channels_temp.dev_attr.attr,
+ &sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr,
+ &sensor_dev_attr_pwm2_auto_point2_pwm.dev_attr.attr,
+ NULL
+};
+
+static struct attribute *in0_attrs[] = {
+ &sensor_dev_attr_in0_input.dev_attr.attr,
+ &sensor_dev_attr_in0_max.dev_attr.attr,
+ &sensor_dev_attr_in0_min.dev_attr.attr,
+ &sensor_dev_attr_in0_alarm.dev_attr.attr,
+ NULL
+};
+
+static struct attribute *in3_attrs[] = {
+ &sensor_dev_attr_in3_input.dev_attr.attr,
+ &sensor_dev_attr_in3_max.dev_attr.attr,
+ &sensor_dev_attr_in3_min.dev_attr.attr,
+ &sensor_dev_attr_in3_alarm.dev_attr.attr,
+ NULL
+};
+
+static struct attribute *in4_attrs[] = {
+ &sensor_dev_attr_in4_input.dev_attr.attr,
+ &sensor_dev_attr_in4_max.dev_attr.attr,
+ &sensor_dev_attr_in4_min.dev_attr.attr,
+ &sensor_dev_attr_in4_alarm.dev_attr.attr,
+ NULL
+};
+
+static struct attribute *in5_attrs[] = {
+ &sensor_dev_attr_in5_input.dev_attr.attr,
+ &sensor_dev_attr_in5_max.dev_attr.attr,
+ &sensor_dev_attr_in5_min.dev_attr.attr,
+ &sensor_dev_attr_in5_alarm.dev_attr.attr,
+ NULL
+};
+
+static struct attribute *vid_attrs[] = {
+ &dev_attr_cpu0_vid.attr,
+ &dev_attr_vrm.attr,
+ NULL
+};
+
+static struct attribute_group adt7475_attr_group = { .attrs = adt7475_attrs };
+static struct attribute_group fan4_attr_group = { .attrs = fan4_attrs };
+static struct attribute_group pwm2_attr_group = { .attrs = pwm2_attrs };
+static struct attribute_group in0_attr_group = { .attrs = in0_attrs };
+static struct attribute_group in3_attr_group = { .attrs = in3_attrs };
+static struct attribute_group in4_attr_group = { .attrs = in4_attrs };
+static struct attribute_group in5_attr_group = { .attrs = in5_attrs };
+static struct attribute_group vid_attr_group = { .attrs = vid_attrs };
static int adt7475_detect(struct i2c_client *client, int kind,
struct i2c_board_info *info)
{
struct i2c_adapter *adapter = client->adapter;
+ int vendid, devid, devid2;
+ const char *name;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -ENODEV;
- if (kind <= 0) {
- if (adt7475_read(REG_VENDID) != 0x41 ||
- adt7475_read(REG_DEVID) != 0x75) {
- dev_err(&adapter->dev,
- "Couldn't detect a adt7475 part at 0x%02x\n",
- (unsigned int)client->addr);
- return -ENODEV;
- }
+ vendid = adt7475_read(REG_VENDID);
+ devid2 = adt7475_read(REG_DEVID2);
+ if (vendid != 0x41 || /* Analog Devices */
+ (devid2 & 0xf8) != 0x68)
+ return -ENODEV;
+
+ devid = adt7475_read(REG_DEVID);
+ if (devid == 0x73)
+ name = "adt7473";
+ else if (devid == 0x75 && client->addr == 0x2e)
+ name = "adt7475";
+ else if (devid == 0x76)
+ name = "adt7476";
+ else if ((devid2 & 0xfc) == 0x6c)
+ name = "adt7490";
+ else {
+ dev_dbg(&adapter->dev,
+ "Couldn't detect an ADT7473/75/76/90 part at "
+ "0x%02x\n", (unsigned int)client->addr);
+ return -ENODEV;
}
- strlcpy(info->type, adt7475_id[0].name, I2C_NAME_SIZE);
+ strlcpy(info->type, name, I2C_NAME_SIZE);
return 0;
}
+static void adt7475_remove_files(struct i2c_client *client,
+ struct adt7475_data *data)
+{
+ sysfs_remove_group(&client->dev.kobj, &adt7475_attr_group);
+ if (data->has_fan4)
+ sysfs_remove_group(&client->dev.kobj, &fan4_attr_group);
+ if (data->has_pwm2)
+ sysfs_remove_group(&client->dev.kobj, &pwm2_attr_group);
+ if (data->has_voltage & (1 << 0))
+ sysfs_remove_group(&client->dev.kobj, &in0_attr_group);
+ if (data->has_voltage & (1 << 3))
+ sysfs_remove_group(&client->dev.kobj, &in3_attr_group);
+ if (data->has_voltage & (1 << 4))
+ sysfs_remove_group(&client->dev.kobj, &in4_attr_group);
+ if (data->has_voltage & (1 << 5))
+ sysfs_remove_group(&client->dev.kobj, &in5_attr_group);
+ if (data->has_vid)
+ sysfs_remove_group(&client->dev.kobj, &vid_attr_group);
+}
+
static int adt7475_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
+ static const char *names[] = {
+ [adt7473] = "ADT7473",
+ [adt7475] = "ADT7475",
+ [adt7476] = "ADT7476",
+ [adt7490] = "ADT7490",
+ };
+
struct adt7475_data *data;
- int i, ret = 0;
+ int i, ret = 0, revision;
+ u8 config2, config3;
data = kzalloc(sizeof(*data), GFP_KERNEL);
if (data == NULL)
@@ -1002,6 +1250,70 @@
mutex_init(&data->lock);
i2c_set_clientdata(client, data);
+ /* Initialize device-specific values */
+ switch (id->driver_data) {
+ case adt7476:
+ data->has_voltage = 0x0e; /* in1 to in3 */
+ revision = adt7475_read(REG_DEVID2) & 0x07;
+ break;
+ case adt7490:
+ data->has_voltage = 0x3e; /* in1 to in5 */
+ revision = adt7475_read(REG_DEVID2) & 0x03;
+ if (revision == 0x03)
+ revision += adt7475_read(REG_DEVREV2);
+ break;
+ default:
+ data->has_voltage = 0x06; /* in1, in2 */
+ revision = adt7475_read(REG_DEVID2) & 0x07;
+ }
+
+ config3 = adt7475_read(REG_CONFIG3);
+ /* Pin PWM2 may alternatively be used for ALERT output */
+ if (!(config3 & CONFIG3_SMBALERT))
+ data->has_pwm2 = 1;
+ /* Meaning of this bit is inverted for the ADT7473-1 */
+ if (id->driver_data == adt7473 && revision >= 1)
+ data->has_pwm2 = !data->has_pwm2;
+
+ data->config4 = adt7475_read(REG_CONFIG4);
+ /* Pin TACH4 may alternatively be used for THERM */
+ if ((data->config4 & CONFIG4_PINFUNC) == 0x0)
+ data->has_fan4 = 1;
+
+ /* THERM configuration is more complex on the ADT7476 and ADT7490,
+ because 2 different pins (TACH4 and +2.5 Vin) can be used for
+ this function */
+ if (id->driver_data == adt7490) {
+ if ((data->config4 & CONFIG4_PINFUNC) == 0x1 &&
+ !(config3 & CONFIG3_THERM))
+ data->has_fan4 = 1;
+ }
+ if (id->driver_data == adt7476 || id->driver_data == adt7490) {
+ if (!(config3 & CONFIG3_THERM) ||
+ (data->config4 & CONFIG4_PINFUNC) == 0x1)
+ data->has_voltage |= (1 << 0); /* in0 */
+ }
+
+ /* On the ADT7476, the +12V input pin may instead be used as VID5,
+ and VID pins may alternatively be used as GPIO */
+ if (id->driver_data == adt7476) {
+ u8 vid = adt7475_read(REG_VID);
+ if (!(vid & VID_VIDSEL))
+ data->has_voltage |= (1 << 4); /* in4 */
+
+ data->has_vid = !(adt7475_read(REG_CONFIG5) & CONFIG5_VIDGPIO);
+ }
+
+ /* Voltage attenuators can be bypassed, globally or individually */
+ config2 = adt7475_read(REG_CONFIG2);
+ if (config2 & CONFIG2_ATTN) {
+ data->bypass_attn = (0x3 << 3) | 0x3;
+ } else {
+ data->bypass_attn = ((data->config4 & CONFIG4_ATTN_IN10) >> 4) |
+ ((data->config4 & CONFIG4_ATTN_IN43) >> 3);
+ }
+ data->bypass_attn &= data->has_voltage;
+
/* Call adt7475_read_pwm for all pwm's as this will reprogram any
pwm's which are disabled to manual mode with 0% duty cycle */
for (i = 0; i < ADT7475_PWM_COUNT; i++)
@@ -1011,16 +1323,70 @@
if (ret)
goto efree;
+ /* Features that can be disabled individually */
+ if (data->has_fan4) {
+ ret = sysfs_create_group(&client->dev.kobj, &fan4_attr_group);
+ if (ret)
+ goto eremove;
+ }
+ if (data->has_pwm2) {
+ ret = sysfs_create_group(&client->dev.kobj, &pwm2_attr_group);
+ if (ret)
+ goto eremove;
+ }
+ if (data->has_voltage & (1 << 0)) {
+ ret = sysfs_create_group(&client->dev.kobj, &in0_attr_group);
+ if (ret)
+ goto eremove;
+ }
+ if (data->has_voltage & (1 << 3)) {
+ ret = sysfs_create_group(&client->dev.kobj, &in3_attr_group);
+ if (ret)
+ goto eremove;
+ }
+ if (data->has_voltage & (1 << 4)) {
+ ret = sysfs_create_group(&client->dev.kobj, &in4_attr_group);
+ if (ret)
+ goto eremove;
+ }
+ if (data->has_voltage & (1 << 5)) {
+ ret = sysfs_create_group(&client->dev.kobj, &in5_attr_group);
+ if (ret)
+ goto eremove;
+ }
+ if (data->has_vid) {
+ data->vrm = vid_which_vrm();
+ ret = sysfs_create_group(&client->dev.kobj, &vid_attr_group);
+ if (ret)
+ goto eremove;
+ }
+
data->hwmon_dev = hwmon_device_register(&client->dev);
if (IS_ERR(data->hwmon_dev)) {
ret = PTR_ERR(data->hwmon_dev);
goto eremove;
}
+ dev_info(&client->dev, "%s device, revision %d\n",
+ names[id->driver_data], revision);
+ if ((data->has_voltage & 0x11) || data->has_fan4 || data->has_pwm2)
+ dev_info(&client->dev, "Optional features:%s%s%s%s%s\n",
+ (data->has_voltage & (1 << 0)) ? " in0" : "",
+ (data->has_voltage & (1 << 4)) ? " in4" : "",
+ data->has_fan4 ? " fan4" : "",
+ data->has_pwm2 ? " pwm2" : "",
+ data->has_vid ? " vid" : "");
+ if (data->bypass_attn)
+ dev_info(&client->dev, "Bypassing attenuators on:%s%s%s%s\n",
+ (data->bypass_attn & (1 << 0)) ? " in0" : "",
+ (data->bypass_attn & (1 << 1)) ? " in1" : "",
+ (data->bypass_attn & (1 << 3)) ? " in3" : "",
+ (data->bypass_attn & (1 << 4)) ? " in4" : "");
+
return 0;
eremove:
- sysfs_remove_group(&client->dev.kobj, &adt7475_attr_group);
+ adt7475_remove_files(client, data);
efree:
kfree(data);
return ret;
@@ -1031,7 +1397,7 @@
struct adt7475_data *data = i2c_get_clientdata(client);
hwmon_device_unregister(data->hwmon_dev);
- sysfs_remove_group(&client->dev.kobj, &adt7475_attr_group);
+ adt7475_remove_files(client, data);
kfree(data);
return 0;
@@ -1116,7 +1482,7 @@
{
struct i2c_client *client = to_i2c_client(dev);
struct adt7475_data *data = i2c_get_clientdata(client);
- u8 ext;
+ u16 ext;
int i;
mutex_lock(&data->lock);
@@ -1127,25 +1493,44 @@
data->alarms = adt7475_read(REG_STATUS2) << 8;
data->alarms |= adt7475_read(REG_STATUS1);
- ext = adt7475_read(REG_EXTEND1);
- for (i = 0; i < ADT7475_VOLTAGE_COUNT; i++)
+ ext = (adt7475_read(REG_EXTEND2) << 8) |
+ adt7475_read(REG_EXTEND1);
+ for (i = 0; i < ADT7475_VOLTAGE_COUNT; i++) {
+ if (!(data->has_voltage & (1 << i)))
+ continue;
data->voltage[INPUT][i] =
(adt7475_read(VOLTAGE_REG(i)) << 2) |
- ((ext >> ((i + 1) * 2)) & 3);
+ ((ext >> (i * 2)) & 3);
+ }
- ext = adt7475_read(REG_EXTEND2);
for (i = 0; i < ADT7475_TEMP_COUNT; i++)
data->temp[INPUT][i] =
(adt7475_read(TEMP_REG(i)) << 2) |
- ((ext >> ((i + 1) * 2)) & 3);
+ ((ext >> ((i + 5) * 2)) & 3);
- for (i = 0; i < ADT7475_TACH_COUNT; i++)
+ if (data->has_voltage & (1 << 5)) {
+ data->alarms |= adt7475_read(REG_STATUS4) << 24;
+ ext = adt7475_read(REG_EXTEND3);
+ data->voltage[INPUT][5] = adt7475_read(REG_VTT) << 2 |
+ ((ext >> 4) & 3);
+ }
+
+ for (i = 0; i < ADT7475_TACH_COUNT; i++) {
+ if (i == 3 && !data->has_fan4)
+ continue;
data->tach[INPUT][i] =
adt7475_read_word(client, TACH_REG(i));
+ }
/* Updated by hw when in auto mode */
- for (i = 0; i < ADT7475_PWM_COUNT; i++)
+ for (i = 0; i < ADT7475_PWM_COUNT; i++) {
+ if (i == 1 && !data->has_pwm2)
+ continue;
data->pwm[INPUT][i] = adt7475_read(PWM_REG(i));
+ }
+
+ if (data->has_vid)
+ data->vid = adt7475_read(REG_VID) & 0x3f;
data->measure_updated = jiffies;
}
@@ -1153,9 +1538,12 @@
/* Limits and settings, should never change update every 60 seconds */
if (time_after(jiffies, data->limits_updated + HZ * 60) ||
!data->valid) {
+ data->config4 = adt7475_read(REG_CONFIG4);
data->config5 = adt7475_read(REG_CONFIG5);
for (i = 0; i < ADT7475_VOLTAGE_COUNT; i++) {
+ if (!(data->has_voltage & (1 << i)))
+ continue;
/* Adjust values so they match the input precision */
data->voltage[MIN][i] =
adt7475_read(VOLTAGE_MIN_REG(i)) << 2;
@@ -1163,6 +1551,11 @@
adt7475_read(VOLTAGE_MAX_REG(i)) << 2;
}
+ if (data->has_voltage & (1 << 5)) {
+ data->voltage[MIN][5] = adt7475_read(REG_VTT_MIN) << 2;
+ data->voltage[MAX][5] = adt7475_read(REG_VTT_MAX) << 2;
+ }
+
for (i = 0; i < ADT7475_TEMP_COUNT; i++) {
/* Adjust values so they match the input precision */
data->temp[MIN][i] =
@@ -1178,11 +1571,16 @@
}
adt7475_read_hystersis(client);
- for (i = 0; i < ADT7475_TACH_COUNT; i++)
+ for (i = 0; i < ADT7475_TACH_COUNT; i++) {
+ if (i == 3 && !data->has_fan4)
+ continue;
data->tach[MIN][i] =
adt7475_read_word(client, TACH_MIN_REG(i));
+ }
for (i = 0; i < ADT7475_PWM_COUNT; i++) {
+ if (i == 1 && !data->has_pwm2)
+ continue;
data->pwm[MAX][i] = adt7475_read(PWM_MAX_REG(i));
data->pwm[MIN][i] = adt7475_read(PWM_MIN_REG(i));
/* Set the channel and control information */
diff --git a/drivers/hwmon/asb100.c b/drivers/hwmon/asb100.c
index 8acf829..480f80e 100644
--- a/drivers/hwmon/asb100.c
+++ b/drivers/hwmon/asb100.c
@@ -701,6 +701,7 @@
struct i2c_board_info *info)
{
struct i2c_adapter *adapter = client->adapter;
+ int val1, val2;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
pr_debug("asb100.o: detect failed, "
@@ -708,50 +709,30 @@
return -ENODEV;
}
- /* The chip may be stuck in some other bank than bank 0. This may
- make reading other information impossible. Specify a force=... or
- force_*=... parameter, and the chip will be reset to the right
- bank. */
- if (kind < 0) {
+ val1 = i2c_smbus_read_byte_data(client, ASB100_REG_BANK);
+ val2 = i2c_smbus_read_byte_data(client, ASB100_REG_CHIPMAN);
- int val1 = i2c_smbus_read_byte_data(client, ASB100_REG_BANK);
- int val2 = i2c_smbus_read_byte_data(client, ASB100_REG_CHIPMAN);
+ /* If we're in bank 0 */
+ if ((!(val1 & 0x07)) &&
+ /* Check for ASB100 ID (low byte) */
+ (((!(val1 & 0x80)) && (val2 != 0x94)) ||
+ /* Check for ASB100 ID (high byte ) */
+ ((val1 & 0x80) && (val2 != 0x06)))) {
+ pr_debug("asb100: detect failed, bad chip id 0x%02x!\n", val2);
+ return -ENODEV;
+ }
- /* If we're in bank 0 */
- if ((!(val1 & 0x07)) &&
- /* Check for ASB100 ID (low byte) */
- (((!(val1 & 0x80)) && (val2 != 0x94)) ||
- /* Check for ASB100 ID (high byte ) */
- ((val1 & 0x80) && (val2 != 0x06)))) {
- pr_debug("asb100.o: detect failed, "
- "bad chip id 0x%02x!\n", val2);
- return -ENODEV;
- }
-
- } /* kind < 0 */
-
- /* We have either had a force parameter, or we have already detected
- Winbond. Put it now into bank 0 and Vendor ID High Byte */
+ /* Put it now into bank 0 and Vendor ID High Byte */
i2c_smbus_write_byte_data(client, ASB100_REG_BANK,
(i2c_smbus_read_byte_data(client, ASB100_REG_BANK) & 0x78)
| 0x80);
/* Determine the chip type. */
- if (kind <= 0) {
- int val1 = i2c_smbus_read_byte_data(client, ASB100_REG_WCHIPID);
- int val2 = i2c_smbus_read_byte_data(client, ASB100_REG_CHIPMAN);
+ val1 = i2c_smbus_read_byte_data(client, ASB100_REG_WCHIPID);
+ val2 = i2c_smbus_read_byte_data(client, ASB100_REG_CHIPMAN);
- if ((val1 == 0x31) && (val2 == 0x06))
- kind = asb100;
- else {
- if (kind == 0)
- dev_warn(&adapter->dev, "ignoring "
- "'force' parameter for unknown chip "
- "at adapter %d, address 0x%02x.\n",
- i2c_adapter_id(adapter), client->addr);
- return -ENODEV;
- }
- }
+ if (val1 != 0x31 || val2 != 0x06)
+ return -ENODEV;
strlcpy(info->type, "asb100", I2C_NAME_SIZE);
diff --git a/drivers/hwmon/dme1737.c b/drivers/hwmon/dme1737.c
index 27d6257..4377bb0 100644
--- a/drivers/hwmon/dme1737.c
+++ b/drivers/hwmon/dme1737.c
@@ -2220,33 +2220,23 @@
return -ENODEV;
}
- /* A negative kind means that the driver was loaded with no force
- * parameter (default), so we must identify the chip. */
- if (kind < 0) {
- company = i2c_smbus_read_byte_data(client, DME1737_REG_COMPANY);
- verstep = i2c_smbus_read_byte_data(client, DME1737_REG_VERSTEP);
+ company = i2c_smbus_read_byte_data(client, DME1737_REG_COMPANY);
+ verstep = i2c_smbus_read_byte_data(client, DME1737_REG_VERSTEP);
- if (company == DME1737_COMPANY_SMSC &&
- (verstep & DME1737_VERSTEP_MASK) == DME1737_VERSTEP) {
- kind = dme1737;
- } else if (company == DME1737_COMPANY_SMSC &&
- verstep == SCH5027_VERSTEP) {
- kind = sch5027;
- } else {
- return -ENODEV;
- }
- }
-
- if (kind == sch5027) {
+ if (company == DME1737_COMPANY_SMSC &&
+ verstep == SCH5027_VERSTEP) {
name = "sch5027";
- } else {
- kind = dme1737;
+
+ } else if (company == DME1737_COMPANY_SMSC &&
+ (verstep & DME1737_VERSTEP_MASK) == DME1737_VERSTEP) {
name = "dme1737";
+ } else {
+ return -ENODEV;
}
dev_info(dev, "Found a %s chip at 0x%02x (rev 0x%02x).\n",
- kind == sch5027 ? "SCH5027" : "DME1737", client->addr,
- verstep);
+ verstep == SCH5027_VERSTEP ? "SCH5027" : "DME1737",
+ client->addr, verstep);
strlcpy(info->type, name, I2C_NAME_SIZE);
return 0;
diff --git a/drivers/hwmon/ds1621.c b/drivers/hwmon/ds1621.c
index 53f88f5..2a4c6a0 100644
--- a/drivers/hwmon/ds1621.c
+++ b/drivers/hwmon/ds1621.c
@@ -237,20 +237,16 @@
return -ENODEV;
/* Now, we do the remaining detection. It is lousy. */
- if (kind < 0) {
- /* The NVB bit should be low if no EEPROM write has been
- requested during the latest 10ms, which is highly
- improbable in our case. */
- conf = i2c_smbus_read_byte_data(client, DS1621_REG_CONF);
- if (conf < 0 || conf & DS1621_REG_CONFIG_NVB)
+ /* The NVB bit should be low if no EEPROM write has been requested
+ during the latest 10ms, which is highly improbable in our case. */
+ conf = i2c_smbus_read_byte_data(client, DS1621_REG_CONF);
+ if (conf < 0 || conf & DS1621_REG_CONFIG_NVB)
+ return -ENODEV;
+ /* The 7 lowest bits of a temperature should always be 0. */
+ for (i = 0; i < ARRAY_SIZE(DS1621_REG_TEMP); i++) {
+ temp = i2c_smbus_read_word_data(client, DS1621_REG_TEMP[i]);
+ if (temp < 0 || (temp & 0x7f00))
return -ENODEV;
- /* The 7 lowest bits of a temperature should always be 0. */
- for (i = 0; i < ARRAY_SIZE(DS1621_REG_TEMP); i++) {
- temp = i2c_smbus_read_word_data(client,
- DS1621_REG_TEMP[i]);
- if (temp < 0 || (temp & 0x7f00))
- return -ENODEV;
- }
}
strlcpy(info->type, "ds1621", I2C_NAME_SIZE);
diff --git a/drivers/hwmon/f71882fg.c b/drivers/hwmon/f71882fg.c
index 4146105..a95fa42 100644
--- a/drivers/hwmon/f71882fg.c
+++ b/drivers/hwmon/f71882fg.c
@@ -48,6 +48,7 @@
#define SIO_F71858_ID 0x0507 /* Chipset ID */
#define SIO_F71862_ID 0x0601 /* Chipset ID */
#define SIO_F71882_ID 0x0541 /* Chipset ID */
+#define SIO_F71889_ID 0x0723 /* Chipset ID */
#define SIO_F8000_ID 0x0581 /* Chipset ID */
#define REGION_LENGTH 8
@@ -95,12 +96,13 @@
module_param(force_id, ushort, 0);
MODULE_PARM_DESC(force_id, "Override the detected device ID");
-enum chips { f71858fg, f71862fg, f71882fg, f8000 };
+enum chips { f71858fg, f71862fg, f71882fg, f71889fg, f8000 };
static const char *f71882fg_names[] = {
"f71858fg",
"f71862fg",
"f71882fg",
+ "f71889fg",
"f8000",
};
@@ -155,7 +157,7 @@
u8 pwm_auto_point_hyst[2];
u8 pwm_auto_point_mapping[4];
u8 pwm_auto_point_pwm[4][5];
- u8 pwm_auto_point_temp[4][4];
+ s8 pwm_auto_point_temp[4][4];
};
/* Sysfs in */
@@ -258,7 +260,9 @@
static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
-/* Temp and in attr for the f71858fg */
+/* Temp and in attr for the f71858fg, the f71858fg is special as it
+ has its temperature indexes start at 0 (the others start at 1) and
+ it only has 3 voltage inputs */
static struct sensor_device_attribute_2 f71858fg_in_temp_attr[] = {
SENSOR_ATTR_2(in0_input, S_IRUGO, show_in, NULL, 0, 0),
SENSOR_ATTR_2(in1_input, S_IRUGO, show_in, NULL, 0, 1),
@@ -302,8 +306,8 @@
SENSOR_ATTR_2(temp3_fault, S_IRUGO, show_temp_fault, NULL, 0, 2),
};
-/* Temp and in attr common to both the f71862fg and f71882fg */
-static struct sensor_device_attribute_2 f718x2fg_in_temp_attr[] = {
+/* Temp and in attr common to the f71862fg, f71882fg and f71889fg */
+static struct sensor_device_attribute_2 fxxxx_in_temp_attr[] = {
SENSOR_ATTR_2(in0_input, S_IRUGO, show_in, NULL, 0, 0),
SENSOR_ATTR_2(in1_input, S_IRUGO, show_in, NULL, 0, 1),
SENSOR_ATTR_2(in2_input, S_IRUGO, show_in, NULL, 0, 2),
@@ -371,8 +375,8 @@
SENSOR_ATTR_2(temp3_fault, S_IRUGO, show_temp_fault, NULL, 0, 3),
};
-/* Temp and in attr found only on the f71882fg */
-static struct sensor_device_attribute_2 f71882fg_in_temp_attr[] = {
+/* For models with in1 alarm capability */
+static struct sensor_device_attribute_2 fxxxx_in1_alarm_attr[] = {
SENSOR_ATTR_2(in1_max, S_IRUGO|S_IWUSR, show_in_max, store_in_max,
0, 1),
SENSOR_ATTR_2(in1_beep, S_IRUGO|S_IWUSR, show_in_beep, store_in_beep,
@@ -383,6 +387,7 @@
/* Temp and in attr for the f8000
Note on the f8000 temp_ovt (crit) is used as max, and temp_high (max)
is used as hysteresis value to clear alarms
+ Also like the f71858fg its temperature indexes start at 0
*/
static struct sensor_device_attribute_2 f8000_in_temp_attr[] = {
SENSOR_ATTR_2(in0_input, S_IRUGO, show_in, NULL, 0, 0),
@@ -413,61 +418,70 @@
};
/* Fan / PWM attr common to all models */
-static struct sensor_device_attribute_2 fxxxx_fan_attr[] = {
+static struct sensor_device_attribute_2 fxxxx_fan_attr[4][6] = { {
SENSOR_ATTR_2(fan1_input, S_IRUGO, show_fan, NULL, 0, 0),
SENSOR_ATTR_2(fan1_full_speed, S_IRUGO|S_IWUSR,
show_fan_full_speed,
store_fan_full_speed, 0, 0),
SENSOR_ATTR_2(fan1_alarm, S_IRUGO, show_fan_alarm, NULL, 0, 0),
- SENSOR_ATTR_2(fan2_input, S_IRUGO, show_fan, NULL, 0, 1),
- SENSOR_ATTR_2(fan2_full_speed, S_IRUGO|S_IWUSR,
- show_fan_full_speed,
- store_fan_full_speed, 0, 1),
- SENSOR_ATTR_2(fan2_alarm, S_IRUGO, show_fan_alarm, NULL, 0, 1),
- SENSOR_ATTR_2(fan3_input, S_IRUGO, show_fan, NULL, 0, 2),
- SENSOR_ATTR_2(fan3_full_speed, S_IRUGO|S_IWUSR,
- show_fan_full_speed,
- store_fan_full_speed, 0, 2),
- SENSOR_ATTR_2(fan3_alarm, S_IRUGO, show_fan_alarm, NULL, 0, 2),
-
SENSOR_ATTR_2(pwm1, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 0, 0),
SENSOR_ATTR_2(pwm1_enable, S_IRUGO|S_IWUSR, show_pwm_enable,
store_pwm_enable, 0, 0),
SENSOR_ATTR_2(pwm1_interpolate, S_IRUGO|S_IWUSR,
show_pwm_interpolate, store_pwm_interpolate, 0, 0),
- SENSOR_ATTR_2(pwm1_auto_channels_temp, S_IRUGO|S_IWUSR,
- show_pwm_auto_point_channel,
- store_pwm_auto_point_channel, 0, 0),
-
+}, {
+ SENSOR_ATTR_2(fan2_input, S_IRUGO, show_fan, NULL, 0, 1),
+ SENSOR_ATTR_2(fan2_full_speed, S_IRUGO|S_IWUSR,
+ show_fan_full_speed,
+ store_fan_full_speed, 0, 1),
+ SENSOR_ATTR_2(fan2_alarm, S_IRUGO, show_fan_alarm, NULL, 0, 1),
SENSOR_ATTR_2(pwm2, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 0, 1),
SENSOR_ATTR_2(pwm2_enable, S_IRUGO|S_IWUSR, show_pwm_enable,
store_pwm_enable, 0, 1),
SENSOR_ATTR_2(pwm2_interpolate, S_IRUGO|S_IWUSR,
show_pwm_interpolate, store_pwm_interpolate, 0, 1),
- SENSOR_ATTR_2(pwm2_auto_channels_temp, S_IRUGO|S_IWUSR,
- show_pwm_auto_point_channel,
- store_pwm_auto_point_channel, 0, 1),
-
+}, {
+ SENSOR_ATTR_2(fan3_input, S_IRUGO, show_fan, NULL, 0, 2),
+ SENSOR_ATTR_2(fan3_full_speed, S_IRUGO|S_IWUSR,
+ show_fan_full_speed,
+ store_fan_full_speed, 0, 2),
+ SENSOR_ATTR_2(fan3_alarm, S_IRUGO, show_fan_alarm, NULL, 0, 2),
SENSOR_ATTR_2(pwm3, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 0, 2),
SENSOR_ATTR_2(pwm3_enable, S_IRUGO|S_IWUSR, show_pwm_enable,
store_pwm_enable, 0, 2),
SENSOR_ATTR_2(pwm3_interpolate, S_IRUGO|S_IWUSR,
show_pwm_interpolate, store_pwm_interpolate, 0, 2),
- SENSOR_ATTR_2(pwm3_auto_channels_temp, S_IRUGO|S_IWUSR,
- show_pwm_auto_point_channel,
- store_pwm_auto_point_channel, 0, 2),
-};
+}, {
+ SENSOR_ATTR_2(fan4_input, S_IRUGO, show_fan, NULL, 0, 3),
+ SENSOR_ATTR_2(fan4_full_speed, S_IRUGO|S_IWUSR,
+ show_fan_full_speed,
+ store_fan_full_speed, 0, 3),
+ SENSOR_ATTR_2(fan4_alarm, S_IRUGO, show_fan_alarm, NULL, 0, 3),
+ SENSOR_ATTR_2(pwm4, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 0, 3),
+ SENSOR_ATTR_2(pwm4_enable, S_IRUGO|S_IWUSR, show_pwm_enable,
+ store_pwm_enable, 0, 3),
+ SENSOR_ATTR_2(pwm4_interpolate, S_IRUGO|S_IWUSR,
+ show_pwm_interpolate, store_pwm_interpolate, 0, 3),
+} };
-/* Fan / PWM attr for the f71862fg, less pwms and less zones per pwm than the
- f71882fg */
-static struct sensor_device_attribute_2 f71862fg_fan_attr[] = {
+/* Attr for models which can beep on Fan alarm */
+static struct sensor_device_attribute_2 fxxxx_fan_beep_attr[] = {
SENSOR_ATTR_2(fan1_beep, S_IRUGO|S_IWUSR, show_fan_beep,
store_fan_beep, 0, 0),
SENSOR_ATTR_2(fan2_beep, S_IRUGO|S_IWUSR, show_fan_beep,
store_fan_beep, 0, 1),
SENSOR_ATTR_2(fan3_beep, S_IRUGO|S_IWUSR, show_fan_beep,
store_fan_beep, 0, 2),
+ SENSOR_ATTR_2(fan4_beep, S_IRUGO|S_IWUSR, show_fan_beep,
+ store_fan_beep, 0, 3),
+};
+/* PWM attr for the f71862fg, fewer pwms and fewer zones per pwm than the
+ f71858fg / f71882fg / f71889fg */
+static struct sensor_device_attribute_2 f71862fg_auto_pwm_attr[] = {
+ SENSOR_ATTR_2(pwm1_auto_channels_temp, S_IRUGO|S_IWUSR,
+ show_pwm_auto_point_channel,
+ store_pwm_auto_point_channel, 0, 0),
SENSOR_ATTR_2(pwm1_auto_point1_pwm, S_IRUGO|S_IWUSR,
show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
1, 0),
@@ -487,6 +501,9 @@
SENSOR_ATTR_2(pwm1_auto_point2_temp_hyst, S_IRUGO,
show_pwm_auto_point_temp_hyst, NULL, 3, 0),
+ SENSOR_ATTR_2(pwm2_auto_channels_temp, S_IRUGO|S_IWUSR,
+ show_pwm_auto_point_channel,
+ store_pwm_auto_point_channel, 0, 1),
SENSOR_ATTR_2(pwm2_auto_point1_pwm, S_IRUGO|S_IWUSR,
show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
1, 1),
@@ -506,6 +523,9 @@
SENSOR_ATTR_2(pwm2_auto_point2_temp_hyst, S_IRUGO,
show_pwm_auto_point_temp_hyst, NULL, 3, 1),
+ SENSOR_ATTR_2(pwm3_auto_channels_temp, S_IRUGO|S_IWUSR,
+ show_pwm_auto_point_channel,
+ store_pwm_auto_point_channel, 0, 2),
SENSOR_ATTR_2(pwm3_auto_point1_pwm, S_IRUGO|S_IWUSR,
show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
1, 2),
@@ -526,8 +546,11 @@
show_pwm_auto_point_temp_hyst, NULL, 3, 2),
};
-/* Fan / PWM attr common to both the f71882fg and f71858fg */
-static struct sensor_device_attribute_2 f71882fg_f71858fg_fan_attr[] = {
+/* PWM attr common to the f71858fg, f71882fg and f71889fg */
+static struct sensor_device_attribute_2 fxxxx_auto_pwm_attr[4][14] = { {
+ SENSOR_ATTR_2(pwm1_auto_channels_temp, S_IRUGO|S_IWUSR,
+ show_pwm_auto_point_channel,
+ store_pwm_auto_point_channel, 0, 0),
SENSOR_ATTR_2(pwm1_auto_point1_pwm, S_IRUGO|S_IWUSR,
show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
0, 0),
@@ -565,7 +588,10 @@
show_pwm_auto_point_temp_hyst, NULL, 2, 0),
SENSOR_ATTR_2(pwm1_auto_point4_temp_hyst, S_IRUGO,
show_pwm_auto_point_temp_hyst, NULL, 3, 0),
-
+}, {
+ SENSOR_ATTR_2(pwm2_auto_channels_temp, S_IRUGO|S_IWUSR,
+ show_pwm_auto_point_channel,
+ store_pwm_auto_point_channel, 0, 1),
SENSOR_ATTR_2(pwm2_auto_point1_pwm, S_IRUGO|S_IWUSR,
show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
0, 1),
@@ -603,7 +629,10 @@
show_pwm_auto_point_temp_hyst, NULL, 2, 1),
SENSOR_ATTR_2(pwm2_auto_point4_temp_hyst, S_IRUGO,
show_pwm_auto_point_temp_hyst, NULL, 3, 1),
-
+}, {
+ SENSOR_ATTR_2(pwm3_auto_channels_temp, S_IRUGO|S_IWUSR,
+ show_pwm_auto_point_channel,
+ store_pwm_auto_point_channel, 0, 2),
SENSOR_ATTR_2(pwm3_auto_point1_pwm, S_IRUGO|S_IWUSR,
show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
0, 2),
@@ -641,30 +670,7 @@
show_pwm_auto_point_temp_hyst, NULL, 2, 2),
SENSOR_ATTR_2(pwm3_auto_point4_temp_hyst, S_IRUGO,
show_pwm_auto_point_temp_hyst, NULL, 3, 2),
-};
-
-/* Fan / PWM attr found on the f71882fg but not on the f71858fg */
-static struct sensor_device_attribute_2 f71882fg_fan_attr[] = {
- SENSOR_ATTR_2(fan1_beep, S_IRUGO|S_IWUSR, show_fan_beep,
- store_fan_beep, 0, 0),
- SENSOR_ATTR_2(fan2_beep, S_IRUGO|S_IWUSR, show_fan_beep,
- store_fan_beep, 0, 1),
- SENSOR_ATTR_2(fan3_beep, S_IRUGO|S_IWUSR, show_fan_beep,
- store_fan_beep, 0, 2),
-
- SENSOR_ATTR_2(fan4_input, S_IRUGO, show_fan, NULL, 0, 3),
- SENSOR_ATTR_2(fan4_full_speed, S_IRUGO|S_IWUSR,
- show_fan_full_speed,
- store_fan_full_speed, 0, 3),
- SENSOR_ATTR_2(fan4_beep, S_IRUGO|S_IWUSR, show_fan_beep,
- store_fan_beep, 0, 3),
- SENSOR_ATTR_2(fan4_alarm, S_IRUGO, show_fan_alarm, NULL, 0, 3),
-
- SENSOR_ATTR_2(pwm4, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 0, 3),
- SENSOR_ATTR_2(pwm4_enable, S_IRUGO|S_IWUSR, show_pwm_enable,
- store_pwm_enable, 0, 3),
- SENSOR_ATTR_2(pwm4_interpolate, S_IRUGO|S_IWUSR,
- show_pwm_interpolate, store_pwm_interpolate, 0, 3),
+}, {
SENSOR_ATTR_2(pwm4_auto_channels_temp, S_IRUGO|S_IWUSR,
show_pwm_auto_point_channel,
store_pwm_auto_point_channel, 0, 3),
@@ -705,14 +711,20 @@
show_pwm_auto_point_temp_hyst, NULL, 2, 3),
SENSOR_ATTR_2(pwm4_auto_point4_temp_hyst, S_IRUGO,
show_pwm_auto_point_temp_hyst, NULL, 3, 3),
-};
+} };
-/* Fan / PWM attr for the f8000, zones mapped to temp instead of to pwm!
- Also the register block at offset A0 maps to TEMP1 (so our temp2, as the
- F8000 starts counting temps at 0), B0 maps the TEMP2 and C0 maps to TEMP0 */
+/* Fan attr specific to the f8000 (4th fan input can only measure speed) */
static struct sensor_device_attribute_2 f8000_fan_attr[] = {
SENSOR_ATTR_2(fan4_input, S_IRUGO, show_fan, NULL, 0, 3),
+};
+/* PWM attr for the f8000, zones mapped to temp instead of to pwm!
+ Also the register block at offset A0 maps to TEMP1 (so our temp2, as the
+ F8000 starts counting temps at 0), B0 maps the TEMP2 and C0 maps to TEMP0 */
+static struct sensor_device_attribute_2 f8000_auto_pwm_attr[] = {
+ SENSOR_ATTR_2(pwm1_auto_channels_temp, S_IRUGO|S_IWUSR,
+ show_pwm_auto_point_channel,
+ store_pwm_auto_point_channel, 0, 0),
SENSOR_ATTR_2(temp1_auto_point1_pwm, S_IRUGO|S_IWUSR,
show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
0, 2),
@@ -751,6 +763,9 @@
SENSOR_ATTR_2(temp1_auto_point4_temp_hyst, S_IRUGO,
show_pwm_auto_point_temp_hyst, NULL, 3, 2),
+ SENSOR_ATTR_2(pwm2_auto_channels_temp, S_IRUGO|S_IWUSR,
+ show_pwm_auto_point_channel,
+ store_pwm_auto_point_channel, 0, 1),
SENSOR_ATTR_2(temp2_auto_point1_pwm, S_IRUGO|S_IWUSR,
show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
0, 0),
@@ -789,6 +804,9 @@
SENSOR_ATTR_2(temp2_auto_point4_temp_hyst, S_IRUGO,
show_pwm_auto_point_temp_hyst, NULL, 3, 0),
+ SENSOR_ATTR_2(pwm3_auto_channels_temp, S_IRUGO|S_IWUSR,
+ show_pwm_auto_point_channel,
+ store_pwm_auto_point_channel, 0, 2),
SENSOR_ATTR_2(temp3_auto_point1_pwm, S_IRUGO|S_IWUSR,
show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
0, 1),
@@ -929,7 +947,7 @@
/* Update once every 60 seconds */
if ( time_after(jiffies, data->last_limits + 60 * HZ ) ||
!data->valid) {
- if (data->type == f71882fg) {
+ if (data->type == f71882fg || data->type == f71889fg) {
data->in1_max =
f71882fg_read8(data, F71882FG_REG_IN1_HIGH);
data->in_beep =
@@ -951,7 +969,8 @@
F71882FG_REG_TEMP_HYST(1));
}
- if (data->type == f71862fg || data->type == f71882fg) {
+ if (data->type == f71862fg || data->type == f71882fg ||
+ data->type == f71889fg) {
data->fan_beep = f71882fg_read8(data,
F71882FG_REG_FAN_BEEP);
data->temp_beep = f71882fg_read8(data,
@@ -961,15 +980,33 @@
data->temp_type[2] = (reg & 0x04) ? 2 : 4;
data->temp_type[3] = (reg & 0x08) ? 2 : 4;
}
- reg2 = f71882fg_read8(data, F71882FG_REG_PECI);
- if ((reg2 & 0x03) == 0x01)
- data->temp_type[1] = 6 /* PECI */;
- else if ((reg2 & 0x03) == 0x02)
- data->temp_type[1] = 5 /* AMDSI */;
- else if (data->type == f71862fg || data->type == f71882fg)
- data->temp_type[1] = (reg & 0x02) ? 2 : 4;
- else
- data->temp_type[1] = 2; /* Only supports BJT */
+ /* Determine temp index 1 sensor type */
+ if (data->type == f71889fg) {
+ reg2 = f71882fg_read8(data, F71882FG_REG_START);
+ switch ((reg2 & 0x60) >> 5) {
+ case 0x00: /* BJT / Thermistor */
+ data->temp_type[1] = (reg & 0x02) ? 2 : 4;
+ break;
+ case 0x01: /* AMDSI */
+ data->temp_type[1] = 5;
+ break;
+ case 0x02: /* PECI */
+ case 0x03: /* Ibex Peak ?? Report as PECI for now */
+ data->temp_type[1] = 6;
+ break;
+ }
+ } else {
+ reg2 = f71882fg_read8(data, F71882FG_REG_PECI);
+ if ((reg2 & 0x03) == 0x01)
+ data->temp_type[1] = 6; /* PECI */
+ else if ((reg2 & 0x03) == 0x02)
+ data->temp_type[1] = 5; /* AMDSI */
+ else if (data->type == f71862fg ||
+ data->type == f71882fg)
+ data->temp_type[1] = (reg & 0x02) ? 2 : 4;
+ else /* f71858fg and f8000 only support BJT */
+ data->temp_type[1] = 2;
+ }
data->pwm_enable = f71882fg_read8(data,
F71882FG_REG_PWM_ENABLE);
@@ -1046,7 +1083,7 @@
if (data->type == f8000)
data->fan[3] = f71882fg_read16(data,
F71882FG_REG_FAN(3));
- if (data->type == f71882fg)
+ if (data->type == f71882fg || data->type == f71889fg)
data->in_status = f71882fg_read8(data,
F71882FG_REG_IN_STATUS);
for (nr = 0; nr < nr_ins; nr++)
@@ -1764,7 +1801,11 @@
int pwm = to_sensor_dev_attr_2(devattr)->index;
int point = to_sensor_dev_attr_2(devattr)->nr;
long val = simple_strtol(buf, NULL, 10) / 1000;
- val = SENSORS_LIMIT(val, 0, 255);
+
+ if (data->type == f71889fg)
+ val = SENSORS_LIMIT(val, -128, 127);
+ else
+ val = SENSORS_LIMIT(val, 0, 127);
mutex_lock(&data->update_lock);
f71882fg_write8(data, F71882FG_REG_POINT_TEMP(pwm, point), val);
@@ -1794,6 +1835,15 @@
return 0;
}
+static void f71882fg_remove_sysfs_files(struct platform_device *pdev,
+ struct sensor_device_attribute_2 *attr, int count)
+{
+ int i;
+
+ for (i = 0; i < count; i++)
+ device_remove_file(&pdev->dev, &attr[i].dev_attr);
+}
+
static int __devinit f71882fg_probe(struct platform_device *pdev)
{
struct f71882fg_data *data;
@@ -1846,16 +1896,17 @@
ARRAY_SIZE(f71858fg_in_temp_attr));
break;
case f71882fg:
+ case f71889fg:
err = f71882fg_create_sysfs_files(pdev,
- f71882fg_in_temp_attr,
- ARRAY_SIZE(f71882fg_in_temp_attr));
+ fxxxx_in1_alarm_attr,
+ ARRAY_SIZE(fxxxx_in1_alarm_attr));
if (err)
goto exit_unregister_sysfs;
/* fall through! */
case f71862fg:
err = f71882fg_create_sysfs_files(pdev,
- f718x2fg_in_temp_attr,
- ARRAY_SIZE(f718x2fg_in_temp_attr));
+ fxxxx_in_temp_attr,
+ ARRAY_SIZE(fxxxx_in_temp_attr));
break;
case f8000:
err = f71882fg_create_sysfs_files(pdev,
@@ -1883,6 +1934,7 @@
err = (data->pwm_enable & 0x15) != 0x15;
break;
case f71882fg:
+ case f71889fg:
err = 0;
break;
case f8000:
@@ -1897,34 +1949,55 @@
goto exit_unregister_sysfs;
}
- err = f71882fg_create_sysfs_files(pdev, fxxxx_fan_attr,
- ARRAY_SIZE(fxxxx_fan_attr));
+ err = f71882fg_create_sysfs_files(pdev, &fxxxx_fan_attr[0][0],
+ ARRAY_SIZE(fxxxx_fan_attr[0]) * nr_fans);
if (err)
goto exit_unregister_sysfs;
+ if (data->type == f71862fg || data->type == f71882fg ||
+ data->type == f71889fg) {
+ err = f71882fg_create_sysfs_files(pdev,
+ fxxxx_fan_beep_attr, nr_fans);
+ if (err)
+ goto exit_unregister_sysfs;
+ }
+
switch (data->type) {
case f71862fg:
err = f71882fg_create_sysfs_files(pdev,
- f71862fg_fan_attr,
- ARRAY_SIZE(f71862fg_fan_attr));
- break;
- case f71882fg:
- err = f71882fg_create_sysfs_files(pdev,
- f71882fg_fan_attr,
- ARRAY_SIZE(f71882fg_fan_attr));
- if (err)
- goto exit_unregister_sysfs;
- /* fall through! */
- case f71858fg:
- err = f71882fg_create_sysfs_files(pdev,
- f71882fg_f71858fg_fan_attr,
- ARRAY_SIZE(f71882fg_f71858fg_fan_attr));
+ f71862fg_auto_pwm_attr,
+ ARRAY_SIZE(f71862fg_auto_pwm_attr));
break;
case f8000:
err = f71882fg_create_sysfs_files(pdev,
f8000_fan_attr,
ARRAY_SIZE(f8000_fan_attr));
+ if (err)
+ goto exit_unregister_sysfs;
+ err = f71882fg_create_sysfs_files(pdev,
+ f8000_auto_pwm_attr,
+ ARRAY_SIZE(f8000_auto_pwm_attr));
break;
+ case f71889fg:
+ for (i = 0; i < nr_fans; i++) {
+ data->pwm_auto_point_mapping[i] =
+ f71882fg_read8(data,
+ F71882FG_REG_POINT_MAPPING(i));
+ if (data->pwm_auto_point_mapping[i] & 0x80)
+ break;
+ }
+ if (i != nr_fans) {
+ dev_warn(&pdev->dev,
+ "Auto pwm controlled by raw digital "
+ "data, disabling pwm auto_point "
+ "sysfs attributes\n");
+ break;
+ }
+ /* fall through */
+ default: /* f71858fg / f71882fg */
+ err = f71882fg_create_sysfs_files(pdev,
+ &fxxxx_auto_pwm_attr[0][0],
+ ARRAY_SIZE(fxxxx_auto_pwm_attr[0]) * nr_fans);
}
if (err)
goto exit_unregister_sysfs;
@@ -1954,33 +2027,76 @@
static int f71882fg_remove(struct platform_device *pdev)
{
- int i;
struct f71882fg_data *data = platform_get_drvdata(pdev);
+ int nr_fans = (data->type == f71882fg) ? 4 : 3;
+ u8 start_reg = f71882fg_read8(data, F71882FG_REG_START);
platform_set_drvdata(pdev, NULL);
if (data->hwmon_dev)
hwmon_device_unregister(data->hwmon_dev);
- /* Note we are not looping over all attr arrays we have as the ones
- below are supersets of the ones skipped. */
device_remove_file(&pdev->dev, &dev_attr_name);
- for (i = 0; i < ARRAY_SIZE(f718x2fg_in_temp_attr); i++)
- device_remove_file(&pdev->dev,
- &f718x2fg_in_temp_attr[i].dev_attr);
+ if (start_reg & 0x01) {
+ switch (data->type) {
+ case f71858fg:
+ if (data->temp_config & 0x10)
+ f71882fg_remove_sysfs_files(pdev,
+ f8000_in_temp_attr,
+ ARRAY_SIZE(f8000_in_temp_attr));
+ else
+ f71882fg_remove_sysfs_files(pdev,
+ f71858fg_in_temp_attr,
+ ARRAY_SIZE(f71858fg_in_temp_attr));
+ break;
+ case f71882fg:
+ case f71889fg:
+ f71882fg_remove_sysfs_files(pdev,
+ fxxxx_in1_alarm_attr,
+ ARRAY_SIZE(fxxxx_in1_alarm_attr));
+ /* fall through! */
+ case f71862fg:
+ f71882fg_remove_sysfs_files(pdev,
+ fxxxx_in_temp_attr,
+ ARRAY_SIZE(fxxxx_in_temp_attr));
+ break;
+ case f8000:
+ f71882fg_remove_sysfs_files(pdev,
+ f8000_in_temp_attr,
+ ARRAY_SIZE(f8000_in_temp_attr));
+ break;
+ }
+ }
- for (i = 0; i < ARRAY_SIZE(f71882fg_in_temp_attr); i++)
- device_remove_file(&pdev->dev,
- &f71882fg_in_temp_attr[i].dev_attr);
+ if (start_reg & 0x02) {
+ f71882fg_remove_sysfs_files(pdev, &fxxxx_fan_attr[0][0],
+ ARRAY_SIZE(fxxxx_fan_attr[0]) * nr_fans);
- for (i = 0; i < ARRAY_SIZE(fxxxx_fan_attr); i++)
- device_remove_file(&pdev->dev, &fxxxx_fan_attr[i].dev_attr);
+ if (data->type == f71862fg || data->type == f71882fg ||
+ data->type == f71889fg)
+ f71882fg_remove_sysfs_files(pdev,
+ fxxxx_fan_beep_attr, nr_fans);
- for (i = 0; i < ARRAY_SIZE(f71882fg_fan_attr); i++)
- device_remove_file(&pdev->dev, &f71882fg_fan_attr[i].dev_attr);
-
- for (i = 0; i < ARRAY_SIZE(f8000_fan_attr); i++)
- device_remove_file(&pdev->dev, &f8000_fan_attr[i].dev_attr);
+ switch (data->type) {
+ case f71862fg:
+ f71882fg_remove_sysfs_files(pdev,
+ f71862fg_auto_pwm_attr,
+ ARRAY_SIZE(f71862fg_auto_pwm_attr));
+ break;
+ case f8000:
+ f71882fg_remove_sysfs_files(pdev,
+ f8000_fan_attr,
+ ARRAY_SIZE(f8000_fan_attr));
+ f71882fg_remove_sysfs_files(pdev,
+ f8000_auto_pwm_attr,
+ ARRAY_SIZE(f8000_auto_pwm_attr));
+ break;
+ default: /* f71858fg / f71882fg / f71889fg */
+ f71882fg_remove_sysfs_files(pdev,
+ &fxxxx_auto_pwm_attr[0][0],
+ ARRAY_SIZE(fxxxx_auto_pwm_attr[0]) * nr_fans);
+ }
+ }
kfree(data);
@@ -2012,11 +2128,15 @@
case SIO_F71882_ID:
sio_data->type = f71882fg;
break;
+ case SIO_F71889_ID:
+ sio_data->type = f71889fg;
+ break;
case SIO_F8000_ID:
sio_data->type = f8000;
break;
default:
- printk(KERN_INFO DRVNAME ": Unsupported Fintek device\n");
+ printk(KERN_INFO DRVNAME ": Unsupported Fintek device: %04x\n",
+ (unsigned int)devid);
goto exit;
}
diff --git a/drivers/hwmon/f75375s.c b/drivers/hwmon/f75375s.c
index e2107e5..40dfbcd 100644
--- a/drivers/hwmon/f75375s.c
+++ b/drivers/hwmon/f75375s.c
@@ -681,30 +681,20 @@
struct i2c_board_info *info)
{
struct i2c_adapter *adapter = client->adapter;
- u8 version = 0;
- const char *name = "";
+ u16 vendid, chipid;
+ u8 version;
+ const char *name;
- if (kind < 0) {
- u16 vendid = f75375_read16(client, F75375_REG_VENDOR);
- u16 chipid = f75375_read16(client, F75375_CHIP_ID);
- version = f75375_read8(client, F75375_REG_VERSION);
- if (chipid == 0x0306 && vendid == 0x1934) {
- kind = f75375;
- } else if (chipid == 0x0204 && vendid == 0x1934) {
- kind = f75373;
- } else {
- dev_err(&adapter->dev,
- "failed,%02X,%02X,%02X\n",
- chipid, version, vendid);
- return -ENODEV;
- }
- }
-
- if (kind == f75375) {
+ vendid = f75375_read16(client, F75375_REG_VENDOR);
+ chipid = f75375_read16(client, F75375_CHIP_ID);
+ if (chipid == 0x0306 && vendid == 0x1934)
name = "f75375";
- } else if (kind == f75373) {
+ else if (chipid == 0x0204 && vendid == 0x1934)
name = "f75373";
- }
+ else
+ return -ENODEV;
+
+ version = f75375_read8(client, F75375_REG_VERSION);
dev_info(&adapter->dev, "found %s version: %02X\n", name, version);
strlcpy(info->type, name, I2C_NAME_SIZE);
diff --git a/drivers/hwmon/fschmd.c b/drivers/hwmon/fschmd.c
index da1b1f9..281829c 100644
--- a/drivers/hwmon/fschmd.c
+++ b/drivers/hwmon/fschmd.c
@@ -1000,43 +1000,38 @@
}
}
-static int fschmd_detect(struct i2c_client *client, int kind,
+static int fschmd_detect(struct i2c_client *client, int _kind,
struct i2c_board_info *info)
{
+ enum chips kind;
struct i2c_adapter *adapter = client->adapter;
+ char id[4];
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -ENODEV;
/* Detect & Identify the chip */
- if (kind <= 0) {
- char id[4];
+ id[0] = i2c_smbus_read_byte_data(client, FSCHMD_REG_IDENT_0);
+ id[1] = i2c_smbus_read_byte_data(client, FSCHMD_REG_IDENT_1);
+ id[2] = i2c_smbus_read_byte_data(client, FSCHMD_REG_IDENT_2);
+ id[3] = '\0';
- id[0] = i2c_smbus_read_byte_data(client,
- FSCHMD_REG_IDENT_0);
- id[1] = i2c_smbus_read_byte_data(client,
- FSCHMD_REG_IDENT_1);
- id[2] = i2c_smbus_read_byte_data(client,
- FSCHMD_REG_IDENT_2);
- id[3] = '\0';
-
- if (!strcmp(id, "PEG"))
- kind = fscpos;
- else if (!strcmp(id, "HER"))
- kind = fscher;
- else if (!strcmp(id, "SCY"))
- kind = fscscy;
- else if (!strcmp(id, "HRC"))
- kind = fschrc;
- else if (!strcmp(id, "HMD"))
- kind = fschmd;
- else if (!strcmp(id, "HDS"))
- kind = fschds;
- else if (!strcmp(id, "SYL"))
- kind = fscsyl;
- else
- return -ENODEV;
- }
+ if (!strcmp(id, "PEG"))
+ kind = fscpos;
+ else if (!strcmp(id, "HER"))
+ kind = fscher;
+ else if (!strcmp(id, "SCY"))
+ kind = fscscy;
+ else if (!strcmp(id, "HRC"))
+ kind = fschrc;
+ else if (!strcmp(id, "HMD"))
+ kind = fschmd;
+ else if (!strcmp(id, "HDS"))
+ kind = fschds;
+ else if (!strcmp(id, "SYL"))
+ kind = fscsyl;
+ else
+ return -ENODEV;
strlcpy(info->type, fschmd_id[kind - 1].name, I2C_NAME_SIZE);
diff --git a/drivers/hwmon/gl518sm.c b/drivers/hwmon/gl518sm.c
index 7820df4..1d69458a 100644
--- a/drivers/hwmon/gl518sm.c
+++ b/drivers/hwmon/gl518sm.c
@@ -488,36 +488,21 @@
struct i2c_board_info *info)
{
struct i2c_adapter *adapter = client->adapter;
- int i;
+ int rev;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
I2C_FUNC_SMBUS_WORD_DATA))
return -ENODEV;
/* Now, we do the remaining detection. */
-
- if (kind < 0) {
- if ((gl518_read_value(client, GL518_REG_CHIP_ID) != 0x80)
- || (gl518_read_value(client, GL518_REG_CONF) & 0x80))
- return -ENODEV;
- }
+ if ((gl518_read_value(client, GL518_REG_CHIP_ID) != 0x80)
+ || (gl518_read_value(client, GL518_REG_CONF) & 0x80))
+ return -ENODEV;
/* Determine the chip type. */
- if (kind <= 0) {
- i = gl518_read_value(client, GL518_REG_REVISION);
- if (i == 0x00) {
- kind = gl518sm_r00;
- } else if (i == 0x80) {
- kind = gl518sm_r80;
- } else {
- if (kind <= 0)
- dev_info(&adapter->dev,
- "Ignoring 'force' parameter for unknown "
- "chip at adapter %d, address 0x%02x\n",
- i2c_adapter_id(adapter), client->addr);
- return -ENODEV;
- }
- }
+ rev = gl518_read_value(client, GL518_REG_REVISION);
+ if (rev != 0x00 && rev != 0x80)
+ return -ENODEV;
strlcpy(info->type, "gl518sm", I2C_NAME_SIZE);
diff --git a/drivers/hwmon/gl520sm.c b/drivers/hwmon/gl520sm.c
index 19616f2..92b5720 100644
--- a/drivers/hwmon/gl520sm.c
+++ b/drivers/hwmon/gl520sm.c
@@ -691,13 +691,11 @@
return -ENODEV;
/* Determine the chip type. */
- if (kind < 0) {
- if ((gl520_read_value(client, GL520_REG_CHIP_ID) != 0x20) ||
- ((gl520_read_value(client, GL520_REG_REVISION) & 0x7f) != 0x00) ||
- ((gl520_read_value(client, GL520_REG_CONF) & 0x80) != 0x00)) {
- dev_dbg(&client->dev, "Unknown chip type, skipping\n");
- return -ENODEV;
- }
+ if ((gl520_read_value(client, GL520_REG_CHIP_ID) != 0x20) ||
+ ((gl520_read_value(client, GL520_REG_REVISION) & 0x7f) != 0x00) ||
+ ((gl520_read_value(client, GL520_REG_CONF) & 0x80) != 0x00)) {
+ dev_dbg(&client->dev, "Unknown chip type, skipping\n");
+ return -ENODEV;
}
strlcpy(info->type, "gl520sm", I2C_NAME_SIZE);
diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c
index a3749cb..0ffe84d 100644
--- a/drivers/hwmon/it87.c
+++ b/drivers/hwmon/it87.c
@@ -124,6 +124,8 @@
#define IT87_BASE_REG 0x60
/* Logical device 7 registers (IT8712F and later) */
+#define IT87_SIO_GPIO3_REG 0x27
+#define IT87_SIO_GPIO5_REG 0x29
#define IT87_SIO_PINX2_REG 0x2c /* Pin selection */
#define IT87_SIO_VID_REG 0xfc /* VID value */
@@ -244,7 +246,9 @@
/* Values read from Super-I/O config space */
u8 revision;
u8 vid_value;
- /* Values set based on DMI strings */
+ /* Features skipped based on config or DMI */
+ u8 skip_vid;
+ u8 skip_fan;
u8 skip_pwm;
};
@@ -1028,11 +1032,35 @@
chip_type, *address, sio_data->revision);
/* Read GPIO config and VID value from LDN 7 (GPIO) */
- if (sio_data->type != it87) {
+ if (sio_data->type == it87) {
+ /* The IT8705F doesn't have VID pins at all */
+ sio_data->skip_vid = 1;
+ } else {
int reg;
superio_select(GPIO);
- if (sio_data->type == it8718 || sio_data->type == it8720)
+ /* We need at least 4 VID pins */
+ reg = superio_inb(IT87_SIO_GPIO3_REG);
+ if (reg & 0x0f) {
+ pr_info("it87: VID is disabled (pins used for GPIO)\n");
+ sio_data->skip_vid = 1;
+ }
+
+ /* Check if fan3 is there or not */
+ if (reg & (1 << 6))
+ sio_data->skip_pwm |= (1 << 2);
+ if (reg & (1 << 7))
+ sio_data->skip_fan |= (1 << 2);
+
+ /* Check if fan2 is there or not */
+ reg = superio_inb(IT87_SIO_GPIO5_REG);
+ if (reg & (1 << 1))
+ sio_data->skip_pwm |= (1 << 1);
+ if (reg & (1 << 2))
+ sio_data->skip_fan |= (1 << 1);
+
+ if ((sio_data->type == it8718 || sio_data->type == it8720)
+ && !(sio_data->skip_vid))
sio_data->vid_value = superio_inb(IT87_SIO_VID_REG);
reg = superio_inb(IT87_SIO_PINX2_REG);
@@ -1236,8 +1264,7 @@
}
}
- if (data->type == it8712 || data->type == it8716
- || data->type == it8718 || data->type == it8720) {
+ if (!sio_data->skip_vid) {
data->vrm = vid_which_vrm();
/* VID reading from Super-I/O config space if available */
data->vid = sio_data->vid_value;
@@ -1355,8 +1382,10 @@
/* Called when we have found a new IT87. */
static void __devinit it87_init_device(struct platform_device *pdev)
{
+ struct it87_sio_data *sio_data = pdev->dev.platform_data;
struct it87_data *data = platform_get_drvdata(pdev);
int tmp, i;
+ u8 mask;
/* initialize to sane defaults:
* - if the chip is in manual pwm mode, this will be overwritten with
@@ -1402,10 +1431,11 @@
}
/* Check if tachometers are reset manually or by some reason */
+ mask = 0x70 & ~(sio_data->skip_fan << 4);
data->fan_main_ctrl = it87_read_value(data, IT87_REG_FAN_MAIN_CTRL);
- if ((data->fan_main_ctrl & 0x70) == 0) {
+ if ((data->fan_main_ctrl & mask) == 0) {
/* Enable all fan tachometers */
- data->fan_main_ctrl |= 0x70;
+ data->fan_main_ctrl |= mask;
it87_write_value(data, IT87_REG_FAN_MAIN_CTRL, data->fan_main_ctrl);
}
data->has_fan = (data->fan_main_ctrl >> 4) & 0x07;
@@ -1428,6 +1458,9 @@
}
}
+ /* Fan input pins may be used for alternative functions */
+ data->has_fan &= ~sio_data->skip_fan;
+
/* Set current fan mode registers and the default settings for the
* other mode registers */
for (i = 0; i < 3; i++) {
diff --git a/drivers/hwmon/lm63.c b/drivers/hwmon/lm63.c
index 3195a26..5da66ab 100644
--- a/drivers/hwmon/lm63.c
+++ b/drivers/hwmon/lm63.c
@@ -427,40 +427,34 @@
struct i2c_board_info *info)
{
struct i2c_adapter *adapter = new_client->adapter;
+ u8 man_id, chip_id, reg_config1, reg_config2;
+ u8 reg_alert_status, reg_alert_mask;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -ENODEV;
- if (kind < 0) { /* must identify */
- u8 man_id, chip_id, reg_config1, reg_config2;
- u8 reg_alert_status, reg_alert_mask;
+ man_id = i2c_smbus_read_byte_data(new_client, LM63_REG_MAN_ID);
+ chip_id = i2c_smbus_read_byte_data(new_client, LM63_REG_CHIP_ID);
- man_id = i2c_smbus_read_byte_data(new_client,
- LM63_REG_MAN_ID);
- chip_id = i2c_smbus_read_byte_data(new_client,
- LM63_REG_CHIP_ID);
- reg_config1 = i2c_smbus_read_byte_data(new_client,
- LM63_REG_CONFIG1);
- reg_config2 = i2c_smbus_read_byte_data(new_client,
- LM63_REG_CONFIG2);
- reg_alert_status = i2c_smbus_read_byte_data(new_client,
- LM63_REG_ALERT_STATUS);
- reg_alert_mask = i2c_smbus_read_byte_data(new_client,
- LM63_REG_ALERT_MASK);
+ reg_config1 = i2c_smbus_read_byte_data(new_client,
+ LM63_REG_CONFIG1);
+ reg_config2 = i2c_smbus_read_byte_data(new_client,
+ LM63_REG_CONFIG2);
+ reg_alert_status = i2c_smbus_read_byte_data(new_client,
+ LM63_REG_ALERT_STATUS);
+ reg_alert_mask = i2c_smbus_read_byte_data(new_client,
+ LM63_REG_ALERT_MASK);
- if (man_id == 0x01 /* National Semiconductor */
- && chip_id == 0x41 /* LM63 */
- && (reg_config1 & 0x18) == 0x00
- && (reg_config2 & 0xF8) == 0x00
- && (reg_alert_status & 0x20) == 0x00
- && (reg_alert_mask & 0xA4) == 0xA4) {
- kind = lm63;
- } else { /* failed */
- dev_dbg(&adapter->dev, "Unsupported chip "
- "(man_id=0x%02X, chip_id=0x%02X).\n",
- man_id, chip_id);
- return -ENODEV;
- }
+ if (man_id != 0x01 /* National Semiconductor */
+ || chip_id != 0x41 /* LM63 */
+ || (reg_config1 & 0x18) != 0x00
+ || (reg_config2 & 0xF8) != 0x00
+ || (reg_alert_status & 0x20) != 0x00
+ || (reg_alert_mask & 0xA4) != 0xA4) {
+ dev_dbg(&adapter->dev,
+ "Unsupported chip (man_id=0x%02X, chip_id=0x%02X)\n",
+ man_id, chip_id);
+ return -ENODEV;
}
strlcpy(info->type, "lm63", I2C_NAME_SIZE);
diff --git a/drivers/hwmon/lm73.c b/drivers/hwmon/lm73.c
new file mode 100644
index 0000000..0bf8b2a
--- /dev/null
+++ b/drivers/hwmon/lm73.c
@@ -0,0 +1,205 @@
+/*
+ * LM73 Sensor driver
+ * Based on LM75
+ *
+ * Copyright (C) 2007, CenoSYS (www.cenosys.com).
+ * Copyright (C) 2009, Bollore telecom (www.bolloretelecom.eu).
+ *
+ * Guillaume Ligneul <guillaume.ligneul@gmail.com>
+ * Adrien Demarez <adrien.demarez@bolloretelecom.eu>
+ * Jeremy Laine <jeremy.laine@bolloretelecom.eu>
+ *
+ * This software program is licensed subject to the GNU General Public License
+ * (GPL).Version 2,June 1991, available at
+ * http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/err.h>
+
+
+/* Addresses scanned */
+static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4c,
+ 0x4d, 0x4e, I2C_CLIENT_END };
+
+/* Insmod parameters */
+I2C_CLIENT_INSMOD_1(lm73);
+
+/* LM73 registers */
+#define LM73_REG_INPUT 0x00
+#define LM73_REG_CONF 0x01
+#define LM73_REG_MAX 0x02
+#define LM73_REG_MIN 0x03
+#define LM73_REG_CTRL 0x04
+#define LM73_REG_ID 0x07
+
+#define LM73_ID 0x9001 /* or 0x190 after a swab16() */
+#define DRVNAME "lm73"
+#define LM73_TEMP_MIN (-40)
+#define LM73_TEMP_MAX 150
+
+/*-----------------------------------------------------------------------*/
+
+
+static ssize_t set_temp(struct device *dev, struct device_attribute *da,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+ struct i2c_client *client = to_i2c_client(dev);
+ long temp;
+ short value;
+
+ int status = strict_strtol(buf, 10, &temp);
+ if (status < 0)
+ return status;
+
+ /* Write value */
+ value = (short) SENSORS_LIMIT(temp/250, (LM73_TEMP_MIN*4),
+ (LM73_TEMP_MAX*4)) << 5;
+ i2c_smbus_write_word_data(client, attr->index, swab16(value));
+ return count;
+}
+
+static ssize_t show_temp(struct device *dev, struct device_attribute *da,
+ char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+ struct i2c_client *client = to_i2c_client(dev);
+ /* use integer division instead of equivalent right shift to
+ guarantee arithmetic shift and preserve the sign */
+ int temp = ((s16) (swab16(i2c_smbus_read_word_data(client,
+ attr->index)))*250) / 32;
+ return sprintf(buf, "%d\n", temp);
+}
+
+
+/*-----------------------------------------------------------------------*/
+
+/* sysfs attributes for hwmon */
+
+static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO,
+ show_temp, set_temp, LM73_REG_MAX);
+static SENSOR_DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO,
+ show_temp, set_temp, LM73_REG_MIN);
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO,
+ show_temp, NULL, LM73_REG_INPUT);
+
+
+static struct attribute *lm73_attributes[] = {
+ &sensor_dev_attr_temp1_input.dev_attr.attr,
+ &sensor_dev_attr_temp1_max.dev_attr.attr,
+ &sensor_dev_attr_temp1_min.dev_attr.attr,
+
+ NULL
+};
+
+static const struct attribute_group lm73_group = {
+ .attrs = lm73_attributes,
+};
+
+/*-----------------------------------------------------------------------*/
+
+/* device probe and removal */
+
+static int
+lm73_probe(struct i2c_client *client, const struct i2c_device_id *id)
+{
+ struct device *hwmon_dev;
+ int status;
+
+ /* Register sysfs hooks */
+ status = sysfs_create_group(&client->dev.kobj, &lm73_group);
+ if (status)
+ return status;
+
+ hwmon_dev = hwmon_device_register(&client->dev);
+ if (IS_ERR(hwmon_dev)) {
+ status = PTR_ERR(hwmon_dev);
+ goto exit_remove;
+ }
+ i2c_set_clientdata(client, hwmon_dev);
+
+ dev_info(&client->dev, "%s: sensor '%s'\n",
+ dev_name(hwmon_dev), client->name);
+
+ return 0;
+
+exit_remove:
+ sysfs_remove_group(&client->dev.kobj, &lm73_group);
+ return status;
+}
+
+static int lm73_remove(struct i2c_client *client)
+{
+ struct device *hwmon_dev = i2c_get_clientdata(client);
+
+ hwmon_device_unregister(hwmon_dev);
+ sysfs_remove_group(&client->dev.kobj, &lm73_group);
+ i2c_set_clientdata(client, NULL);
+ return 0;
+}
+
+static const struct i2c_device_id lm73_ids[] = {
+ { "lm73", lm73 },
+ { /* LIST END */ }
+};
+MODULE_DEVICE_TABLE(i2c, lm73_ids);
+
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int lm73_detect(struct i2c_client *new_client, int kind,
+ struct i2c_board_info *info)
+{
+ struct i2c_adapter *adapter = new_client->adapter;
+ u16 id;
+ u8 ctrl;
+
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
+ I2C_FUNC_SMBUS_WORD_DATA))
+ return -ENODEV;
+
+ /* Check device ID */
+ id = i2c_smbus_read_word_data(new_client, LM73_REG_ID);
+ ctrl = i2c_smbus_read_byte_data(new_client, LM73_REG_CTRL);
+ if ((id != LM73_ID) || (ctrl & 0x10))
+ return -ENODEV;
+
+ strlcpy(info->type, "lm73", I2C_NAME_SIZE);
+
+ return 0;
+}
+
+static struct i2c_driver lm73_driver = {
+ .class = I2C_CLASS_HWMON,
+ .driver = {
+ .name = "lm73",
+ },
+ .probe = lm73_probe,
+ .remove = lm73_remove,
+ .id_table = lm73_ids,
+ .detect = lm73_detect,
+ .address_data = &addr_data,
+};
+
+/* module glue */
+
+static int __init sensors_lm73_init(void)
+{
+ return i2c_add_driver(&lm73_driver);
+}
+
+static void __exit sensors_lm73_exit(void)
+{
+ i2c_del_driver(&lm73_driver);
+}
+
+MODULE_AUTHOR("Guillaume Ligneul <guillaume.ligneul@gmail.com>");
+MODULE_DESCRIPTION("LM73 driver");
+MODULE_LICENSE("GPL");
+
+module_init(sensors_lm73_init);
+module_exit(sensors_lm73_exit);
diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c
index 55bd87c..e392548 100644
--- a/drivers/hwmon/lm75.c
+++ b/drivers/hwmon/lm75.c
@@ -239,6 +239,7 @@
{
struct i2c_adapter *adapter = new_client->adapter;
int i;
+ int cur, conf, hyst, os;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
I2C_FUNC_SMBUS_WORD_DATA))
@@ -251,40 +252,35 @@
The cycling+unused addresses combination is not tested,
since it would significantly slow the detection down and would
hardly add any value. */
- if (kind < 0) {
- int cur, conf, hyst, os;
- /* Unused addresses */
- cur = i2c_smbus_read_word_data(new_client, 0);
- conf = i2c_smbus_read_byte_data(new_client, 1);
- hyst = i2c_smbus_read_word_data(new_client, 2);
- if (i2c_smbus_read_word_data(new_client, 4) != hyst
- || i2c_smbus_read_word_data(new_client, 5) != hyst
- || i2c_smbus_read_word_data(new_client, 6) != hyst
- || i2c_smbus_read_word_data(new_client, 7) != hyst)
- return -ENODEV;
- os = i2c_smbus_read_word_data(new_client, 3);
- if (i2c_smbus_read_word_data(new_client, 4) != os
- || i2c_smbus_read_word_data(new_client, 5) != os
- || i2c_smbus_read_word_data(new_client, 6) != os
- || i2c_smbus_read_word_data(new_client, 7) != os)
- return -ENODEV;
+ /* Unused addresses */
+ cur = i2c_smbus_read_word_data(new_client, 0);
+ conf = i2c_smbus_read_byte_data(new_client, 1);
+ hyst = i2c_smbus_read_word_data(new_client, 2);
+ if (i2c_smbus_read_word_data(new_client, 4) != hyst
+ || i2c_smbus_read_word_data(new_client, 5) != hyst
+ || i2c_smbus_read_word_data(new_client, 6) != hyst
+ || i2c_smbus_read_word_data(new_client, 7) != hyst)
+ return -ENODEV;
+ os = i2c_smbus_read_word_data(new_client, 3);
+ if (i2c_smbus_read_word_data(new_client, 4) != os
+ || i2c_smbus_read_word_data(new_client, 5) != os
+ || i2c_smbus_read_word_data(new_client, 6) != os
+ || i2c_smbus_read_word_data(new_client, 7) != os)
+ return -ENODEV;
- /* Unused bits */
- if (conf & 0xe0)
- return -ENODEV;
+ /* Unused bits */
+ if (conf & 0xe0)
+ return -ENODEV;
- /* Addresses cycling */
- for (i = 8; i < 0xff; i += 8)
- if (i2c_smbus_read_byte_data(new_client, i + 1) != conf
- || i2c_smbus_read_word_data(new_client, i + 2) != hyst
- || i2c_smbus_read_word_data(new_client, i + 3) != os)
- return -ENODEV;
+ /* Addresses cycling */
+ for (i = 8; i < 0xff; i += 8) {
+ if (i2c_smbus_read_byte_data(new_client, i + 1) != conf
+ || i2c_smbus_read_word_data(new_client, i + 2) != hyst
+ || i2c_smbus_read_word_data(new_client, i + 3) != os)
+ return -ENODEV;
}
- /* NOTE: we treat "force=..." and "force_lm75=..." the same.
- * Only new-style driver binding distinguishes chip types.
- */
strlcpy(info->type, "lm75", I2C_NAME_SIZE);
return 0;
diff --git a/drivers/hwmon/lm77.c b/drivers/hwmon/lm77.c
index 866b401..ac067fd 100644
--- a/drivers/hwmon/lm77.c
+++ b/drivers/hwmon/lm77.c
@@ -249,6 +249,7 @@
struct i2c_board_info *info)
{
struct i2c_adapter *adapter = new_client->adapter;
+ int i, cur, conf, hyst, crit, min, max;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
I2C_FUNC_SMBUS_WORD_DATA))
@@ -265,52 +266,49 @@
4. registers cycling over 8-address boundaries
Word-sized registers are high-byte first. */
- if (kind < 0) {
- int i, cur, conf, hyst, crit, min, max;
- /* addresses cycling */
- cur = i2c_smbus_read_word_data(new_client, 0);
- conf = i2c_smbus_read_byte_data(new_client, 1);
- hyst = i2c_smbus_read_word_data(new_client, 2);
- crit = i2c_smbus_read_word_data(new_client, 3);
- min = i2c_smbus_read_word_data(new_client, 4);
- max = i2c_smbus_read_word_data(new_client, 5);
- for (i = 8; i <= 0xff; i += 8)
- if (i2c_smbus_read_byte_data(new_client, i + 1) != conf
- || i2c_smbus_read_word_data(new_client, i + 2) != hyst
- || i2c_smbus_read_word_data(new_client, i + 3) != crit
- || i2c_smbus_read_word_data(new_client, i + 4) != min
- || i2c_smbus_read_word_data(new_client, i + 5) != max)
- return -ENODEV;
-
- /* sign bits */
- if (((cur & 0x00f0) != 0xf0 && (cur & 0x00f0) != 0x0)
- || ((hyst & 0x00f0) != 0xf0 && (hyst & 0x00f0) != 0x0)
- || ((crit & 0x00f0) != 0xf0 && (crit & 0x00f0) != 0x0)
- || ((min & 0x00f0) != 0xf0 && (min & 0x00f0) != 0x0)
- || ((max & 0x00f0) != 0xf0 && (max & 0x00f0) != 0x0))
+ /* addresses cycling */
+ cur = i2c_smbus_read_word_data(new_client, 0);
+ conf = i2c_smbus_read_byte_data(new_client, 1);
+ hyst = i2c_smbus_read_word_data(new_client, 2);
+ crit = i2c_smbus_read_word_data(new_client, 3);
+ min = i2c_smbus_read_word_data(new_client, 4);
+ max = i2c_smbus_read_word_data(new_client, 5);
+ for (i = 8; i <= 0xff; i += 8) {
+ if (i2c_smbus_read_byte_data(new_client, i + 1) != conf
+ || i2c_smbus_read_word_data(new_client, i + 2) != hyst
+ || i2c_smbus_read_word_data(new_client, i + 3) != crit
+ || i2c_smbus_read_word_data(new_client, i + 4) != min
+ || i2c_smbus_read_word_data(new_client, i + 5) != max)
return -ENODEV;
-
- /* unused bits */
- if (conf & 0xe0)
- return -ENODEV;
-
- /* 0x06 and 0x07 return the last read value */
- cur = i2c_smbus_read_word_data(new_client, 0);
- if (i2c_smbus_read_word_data(new_client, 6) != cur
- || i2c_smbus_read_word_data(new_client, 7) != cur)
- return -ENODEV;
- hyst = i2c_smbus_read_word_data(new_client, 2);
- if (i2c_smbus_read_word_data(new_client, 6) != hyst
- || i2c_smbus_read_word_data(new_client, 7) != hyst)
- return -ENODEV;
- min = i2c_smbus_read_word_data(new_client, 4);
- if (i2c_smbus_read_word_data(new_client, 6) != min
- || i2c_smbus_read_word_data(new_client, 7) != min)
- return -ENODEV;
-
}
+ /* sign bits */
+ if (((cur & 0x00f0) != 0xf0 && (cur & 0x00f0) != 0x0)
+ || ((hyst & 0x00f0) != 0xf0 && (hyst & 0x00f0) != 0x0)
+ || ((crit & 0x00f0) != 0xf0 && (crit & 0x00f0) != 0x0)
+ || ((min & 0x00f0) != 0xf0 && (min & 0x00f0) != 0x0)
+ || ((max & 0x00f0) != 0xf0 && (max & 0x00f0) != 0x0))
+ return -ENODEV;
+
+ /* unused bits */
+ if (conf & 0xe0)
+ return -ENODEV;
+
+ /* 0x06 and 0x07 return the last read value */
+ cur = i2c_smbus_read_word_data(new_client, 0);
+ if (i2c_smbus_read_word_data(new_client, 6) != cur
+ || i2c_smbus_read_word_data(new_client, 7) != cur)
+ return -ENODEV;
+ hyst = i2c_smbus_read_word_data(new_client, 2);
+ if (i2c_smbus_read_word_data(new_client, 6) != hyst
+ || i2c_smbus_read_word_data(new_client, 7) != hyst)
+ return -ENODEV;
+ min = i2c_smbus_read_word_data(new_client, 4);
+ if (i2c_smbus_read_word_data(new_client, 6) != min
+ || i2c_smbus_read_word_data(new_client, 7) != min)
+ return -ENODEV;
+
strlcpy(info->type, "lm77", I2C_NAME_SIZE);
return 0;
diff --git a/drivers/hwmon/lm78.c b/drivers/hwmon/lm78.c
index f7e7016..5978291 100644
--- a/drivers/hwmon/lm78.c
+++ b/drivers/hwmon/lm78.c
@@ -576,52 +576,34 @@
if (isa)
mutex_lock(&isa->update_lock);
- if (kind < 0) {
- if ((i2c_smbus_read_byte_data(client, LM78_REG_CONFIG) & 0x80)
- || i2c_smbus_read_byte_data(client, LM78_REG_I2C_ADDR)
- != address)
- goto err_nodev;
+ if ((i2c_smbus_read_byte_data(client, LM78_REG_CONFIG) & 0x80)
+ || i2c_smbus_read_byte_data(client, LM78_REG_I2C_ADDR) != address)
+ goto err_nodev;
- /* Explicitly prevent the misdetection of Winbond chips */
- i = i2c_smbus_read_byte_data(client, 0x4f);
- if (i == 0xa3 || i == 0x5c)
- goto err_nodev;
- }
+ /* Explicitly prevent the misdetection of Winbond chips */
+ i = i2c_smbus_read_byte_data(client, 0x4f);
+ if (i == 0xa3 || i == 0x5c)
+ goto err_nodev;
/* Determine the chip type. */
- if (kind <= 0) {
- i = i2c_smbus_read_byte_data(client, LM78_REG_CHIPID);
- if (i == 0x00 || i == 0x20 /* LM78 */
- || i == 0x40) /* LM78-J */
- kind = lm78;
- else if ((i & 0xfe) == 0xc0)
- kind = lm79;
- else {
- if (kind == 0)
- dev_warn(&adapter->dev, "Ignoring 'force' "
- "parameter for unknown chip at "
- "adapter %d, address 0x%02x\n",
- i2c_adapter_id(adapter), address);
- goto err_nodev;
- }
+ i = i2c_smbus_read_byte_data(client, LM78_REG_CHIPID);
+ if (i == 0x00 || i == 0x20 /* LM78 */
+ || i == 0x40) /* LM78-J */
+ client_name = "lm78";
+ else if ((i & 0xfe) == 0xc0)
+ client_name = "lm79";
+ else
+ goto err_nodev;
- if (lm78_alias_detect(client, i)) {
- dev_dbg(&adapter->dev, "Device at 0x%02x appears to "
- "be the same as ISA device\n", address);
- goto err_nodev;
- }
+ if (lm78_alias_detect(client, i)) {
+ dev_dbg(&adapter->dev, "Device at 0x%02x appears to "
+ "be the same as ISA device\n", address);
+ goto err_nodev;
}
if (isa)
mutex_unlock(&isa->update_lock);
- switch (kind) {
- case lm79:
- client_name = "lm79";
- break;
- default:
- client_name = "lm78";
- }
strlcpy(info->type, client_name, I2C_NAME_SIZE);
return 0;
diff --git a/drivers/hwmon/lm83.c b/drivers/hwmon/lm83.c
index e59e2d1..08b03e6 100644
--- a/drivers/hwmon/lm83.c
+++ b/drivers/hwmon/lm83.c
@@ -1,7 +1,7 @@
/*
* lm83.c - Part of lm_sensors, Linux kernel modules for hardware
* monitoring
- * Copyright (C) 2003-2008 Jean Delvare <khali@linux-fr.org>
+ * Copyright (C) 2003-2009 Jean Delvare <khali@linux-fr.org>
*
* Heavily inspired from the lm78, lm75 and adm1021 drivers. The LM83 is
* a sensor chip made by National Semiconductor. It reports up to four
@@ -295,69 +295,40 @@
struct i2c_board_info *info)
{
struct i2c_adapter *adapter = new_client->adapter;
- const char *name = "";
+ const char *name;
+ u8 man_id, chip_id;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -ENODEV;
- /* Now we do the detection and identification. A negative kind
- * means that the driver was loaded with no force parameter
- * (default), so we must both detect and identify the chip
- * (actually there is only one possible kind of chip for now, LM83).
- * A zero kind means that the driver was loaded with the force
- * parameter, the detection step shall be skipped. A positive kind
- * means that the driver was loaded with the force parameter and a
- * given kind of chip is requested, so both the detection and the
- * identification steps are skipped. */
-
- /* Default to an LM83 if forced */
- if (kind == 0)
- kind = lm83;
-
- if (kind < 0) { /* detection */
- if (((i2c_smbus_read_byte_data(new_client, LM83_REG_R_STATUS1)
- & 0xA8) != 0x00) ||
- ((i2c_smbus_read_byte_data(new_client, LM83_REG_R_STATUS2)
- & 0x48) != 0x00) ||
- ((i2c_smbus_read_byte_data(new_client, LM83_REG_R_CONFIG)
- & 0x41) != 0x00)) {
- dev_dbg(&adapter->dev,
- "LM83 detection failed at 0x%02x.\n",
- new_client->addr);
- return -ENODEV;
- }
+ /* Detection */
+ if ((i2c_smbus_read_byte_data(new_client, LM83_REG_R_STATUS1) & 0xA8) ||
+ (i2c_smbus_read_byte_data(new_client, LM83_REG_R_STATUS2) & 0x48) ||
+ (i2c_smbus_read_byte_data(new_client, LM83_REG_R_CONFIG) & 0x41)) {
+ dev_dbg(&adapter->dev, "LM83 detection failed at 0x%02x\n",
+ new_client->addr);
+ return -ENODEV;
}
- if (kind <= 0) { /* identification */
- u8 man_id, chip_id;
+ /* Identification */
+ man_id = i2c_smbus_read_byte_data(new_client, LM83_REG_R_MAN_ID);
+ if (man_id != 0x01) /* National Semiconductor */
+ return -ENODEV;
- man_id = i2c_smbus_read_byte_data(new_client,
- LM83_REG_R_MAN_ID);
- chip_id = i2c_smbus_read_byte_data(new_client,
- LM83_REG_R_CHIP_ID);
-
- if (man_id == 0x01) { /* National Semiconductor */
- if (chip_id == 0x03) {
- kind = lm83;
- } else
- if (chip_id == 0x01) {
- kind = lm82;
- }
- }
-
- if (kind <= 0) { /* identification failed */
- dev_info(&adapter->dev,
- "Unsupported chip (man_id=0x%02X, "
- "chip_id=0x%02X).\n", man_id, chip_id);
- return -ENODEV;
- }
- }
-
- if (kind == lm83) {
+ chip_id = i2c_smbus_read_byte_data(new_client, LM83_REG_R_CHIP_ID);
+ switch (chip_id) {
+ case 0x03:
name = "lm83";
- } else
- if (kind == lm82) {
+ break;
+ case 0x01:
name = "lm82";
+ break;
+ default:
+ /* identification failed */
+ dev_info(&adapter->dev,
+ "Unsupported chip (man_id=0x%02X, chip_id=0x%02X)\n",
+ man_id, chip_id);
+ return -ENODEV;
}
strlcpy(info->type, name, I2C_NAME_SIZE);
diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c
index 6c53d98..d56da2e 100644
--- a/drivers/hwmon/lm85.c
+++ b/drivers/hwmon/lm85.c
@@ -5,7 +5,7 @@
Copyright (c) 2002, 2003 Philip Pokorny <ppokorny@penguincomputing.com>
Copyright (c) 2003 Margit Schubert-While <margitsw@t-online.de>
Copyright (c) 2004 Justin Thiessen <jthiessen@penguincomputing.com>
- Copyright (C) 2007, 2008 Jean Delvare <khali@linux-fr.org>
+ Copyright (C) 2007--2009 Jean Delvare <khali@linux-fr.org>
Chip details at <http://www.national.com/ds/LM/LM85.pdf>
@@ -1162,107 +1162,80 @@
struct i2c_adapter *adapter = client->adapter;
int address = client->addr;
const char *type_name;
+ int company, verstep;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
/* We need to be able to do byte I/O */
return -ENODEV;
}
- /* If auto-detecting, determine the chip type */
- if (kind < 0) {
- int company = lm85_read_value(client, LM85_REG_COMPANY);
- int verstep = lm85_read_value(client, LM85_REG_VERSTEP);
+ /* Determine the chip type */
+ company = lm85_read_value(client, LM85_REG_COMPANY);
+ verstep = lm85_read_value(client, LM85_REG_VERSTEP);
- dev_dbg(&adapter->dev, "Detecting device at 0x%02x with "
- "COMPANY: 0x%02x and VERSTEP: 0x%02x\n",
- address, company, verstep);
+ dev_dbg(&adapter->dev, "Detecting device at 0x%02x with "
+ "COMPANY: 0x%02x and VERSTEP: 0x%02x\n",
+ address, company, verstep);
- /* All supported chips have the version in common */
- if ((verstep & LM85_VERSTEP_VMASK) != LM85_VERSTEP_GENERIC &&
- (verstep & LM85_VERSTEP_VMASK) != LM85_VERSTEP_GENERIC2) {
- dev_dbg(&adapter->dev, "Autodetection failed: "
- "unsupported version\n");
- return -ENODEV;
+ /* All supported chips have the version in common */
+ if ((verstep & LM85_VERSTEP_VMASK) != LM85_VERSTEP_GENERIC &&
+ (verstep & LM85_VERSTEP_VMASK) != LM85_VERSTEP_GENERIC2) {
+ dev_dbg(&adapter->dev,
+ "Autodetection failed: unsupported version\n");
+ return -ENODEV;
+ }
+ type_name = "lm85";
+
+ /* Now, refine the detection */
+ if (company == LM85_COMPANY_NATIONAL) {
+ switch (verstep) {
+ case LM85_VERSTEP_LM85C:
+ type_name = "lm85c";
+ break;
+ case LM85_VERSTEP_LM85B:
+ type_name = "lm85b";
+ break;
+ case LM85_VERSTEP_LM96000_1:
+ case LM85_VERSTEP_LM96000_2:
+ /* Check for Winbond WPCD377I */
+ if (lm85_is_fake(client)) {
+ dev_dbg(&adapter->dev,
+ "Found Winbond WPCD377I, ignoring\n");
+ return -ENODEV;
+ }
+ break;
}
- kind = any_chip;
-
- /* Now, refine the detection */
- if (company == LM85_COMPANY_NATIONAL) {
- switch (verstep) {
- case LM85_VERSTEP_LM85C:
- kind = lm85c;
- break;
- case LM85_VERSTEP_LM85B:
- kind = lm85b;
- break;
- case LM85_VERSTEP_LM96000_1:
- case LM85_VERSTEP_LM96000_2:
- /* Check for Winbond WPCD377I */
- if (lm85_is_fake(client)) {
- dev_dbg(&adapter->dev,
- "Found Winbond WPCD377I, "
- "ignoring\n");
- return -ENODEV;
- }
- break;
- }
- } else if (company == LM85_COMPANY_ANALOG_DEV) {
- switch (verstep) {
- case LM85_VERSTEP_ADM1027:
- kind = adm1027;
- break;
- case LM85_VERSTEP_ADT7463:
- case LM85_VERSTEP_ADT7463C:
- kind = adt7463;
- break;
- case LM85_VERSTEP_ADT7468_1:
- case LM85_VERSTEP_ADT7468_2:
- kind = adt7468;
- break;
- }
- } else if (company == LM85_COMPANY_SMSC) {
- switch (verstep) {
- case LM85_VERSTEP_EMC6D100_A0:
- case LM85_VERSTEP_EMC6D100_A1:
- /* Note: we can't tell a '100 from a '101 */
- kind = emc6d100;
- break;
- case LM85_VERSTEP_EMC6D102:
- kind = emc6d102;
- break;
- }
- } else {
- dev_dbg(&adapter->dev, "Autodetection failed: "
- "unknown vendor\n");
- return -ENODEV;
+ } else if (company == LM85_COMPANY_ANALOG_DEV) {
+ switch (verstep) {
+ case LM85_VERSTEP_ADM1027:
+ type_name = "adm1027";
+ break;
+ case LM85_VERSTEP_ADT7463:
+ case LM85_VERSTEP_ADT7463C:
+ type_name = "adt7463";
+ break;
+ case LM85_VERSTEP_ADT7468_1:
+ case LM85_VERSTEP_ADT7468_2:
+ type_name = "adt7468";
+ break;
}
+ } else if (company == LM85_COMPANY_SMSC) {
+ switch (verstep) {
+ case LM85_VERSTEP_EMC6D100_A0:
+ case LM85_VERSTEP_EMC6D100_A1:
+ /* Note: we can't tell a '100 from a '101 */
+ type_name = "emc6d100";
+ break;
+ case LM85_VERSTEP_EMC6D102:
+ type_name = "emc6d102";
+ break;
+ }
+ } else {
+ dev_dbg(&adapter->dev,
+ "Autodetection failed: unknown vendor\n");
+ return -ENODEV;
}
- switch (kind) {
- case lm85b:
- type_name = "lm85b";
- break;
- case lm85c:
- type_name = "lm85c";
- break;
- case adm1027:
- type_name = "adm1027";
- break;
- case adt7463:
- type_name = "adt7463";
- break;
- case adt7468:
- type_name = "adt7468";
- break;
- case emc6d100:
- type_name = "emc6d100";
- break;
- case emc6d102:
- type_name = "emc6d102";
- break;
- default:
- type_name = "lm85";
- }
strlcpy(info->type, type_name, I2C_NAME_SIZE);
return 0;
diff --git a/drivers/hwmon/lm87.c b/drivers/hwmon/lm87.c
index 2e4a3ce..4929b18 100644
--- a/drivers/hwmon/lm87.c
+++ b/drivers/hwmon/lm87.c
@@ -666,37 +666,32 @@
struct i2c_board_info *info)
{
struct i2c_adapter *adapter = new_client->adapter;
- static const char *names[] = { "lm87", "adm1024" };
+ const char *name;
+ u8 cid, rev;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -ENODEV;
- /* Default to an LM87 if forced */
- if (kind == 0)
- kind = lm87;
+ if (lm87_read_value(new_client, LM87_REG_CONFIG) & 0x80)
+ return -ENODEV;
/* Now, we do the remaining detection. */
- if (kind < 0) {
- u8 cid = lm87_read_value(new_client, LM87_REG_COMPANY_ID);
- u8 rev = lm87_read_value(new_client, LM87_REG_REVISION);
+ cid = lm87_read_value(new_client, LM87_REG_COMPANY_ID);
+ rev = lm87_read_value(new_client, LM87_REG_REVISION);
- if (cid == 0x02 /* National Semiconductor */
- && (rev >= 0x01 && rev <= 0x08))
- kind = lm87;
- else if (cid == 0x41 /* Analog Devices */
- && (rev & 0xf0) == 0x10)
- kind = adm1024;
-
- if (kind < 0
- || (lm87_read_value(new_client, LM87_REG_CONFIG) & 0x80)) {
- dev_dbg(&adapter->dev,
- "LM87 detection failed at 0x%02x.\n",
- new_client->addr);
- return -ENODEV;
- }
+ if (cid == 0x02 /* National Semiconductor */
+ && (rev >= 0x01 && rev <= 0x08))
+ name = "lm87";
+ else if (cid == 0x41 /* Analog Devices */
+ && (rev & 0xf0) == 0x10)
+ name = "adm1024";
+ else {
+ dev_dbg(&adapter->dev, "LM87 detection failed at 0x%02x\n",
+ new_client->addr);
+ return -ENODEV;
}
- strlcpy(info->type, names[kind - 1], I2C_NAME_SIZE);
+ strlcpy(info->type, name, I2C_NAME_SIZE);
return 0;
}
diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c
index 1aff757..b7c905f 100644
--- a/drivers/hwmon/lm90.c
+++ b/drivers/hwmon/lm90.c
@@ -1,7 +1,7 @@
/*
* lm90.c - Part of lm_sensors, Linux kernel modules for hardware
* monitoring
- * Copyright (C) 2003-2008 Jean Delvare <khali@linux-fr.org>
+ * Copyright (C) 2003-2009 Jean Delvare <khali@linux-fr.org>
*
* Based on the lm83 driver. The LM90 is a sensor chip made by National
* Semiconductor. It reports up to two temperatures (its own plus up to
@@ -661,154 +661,118 @@
{
struct i2c_adapter *adapter = new_client->adapter;
int address = new_client->addr;
- const char *name = "";
+ const char *name = NULL;
+ int man_id, chip_id, reg_config1, reg_convrate;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -ENODEV;
- /*
- * Now we do the remaining detection. A negative kind means that
- * the driver was loaded with no force parameter (default), so we
- * must both detect and identify the chip. A zero kind means that
- * the driver was loaded with the force parameter, the detection
- * step shall be skipped. A positive kind means that the driver
- * was loaded with the force parameter and a given kind of chip is
- * requested, so both the detection and the identification steps
- * are skipped.
- */
-
- /* Default to an LM90 if forced */
- if (kind == 0)
- kind = lm90;
-
- if (kind < 0) { /* detection and identification */
- int man_id, chip_id, reg_config1, reg_convrate;
-
- if ((man_id = i2c_smbus_read_byte_data(new_client,
+ /* detection and identification */
+ if ((man_id = i2c_smbus_read_byte_data(new_client,
LM90_REG_R_MAN_ID)) < 0
- || (chip_id = i2c_smbus_read_byte_data(new_client,
+ || (chip_id = i2c_smbus_read_byte_data(new_client,
LM90_REG_R_CHIP_ID)) < 0
- || (reg_config1 = i2c_smbus_read_byte_data(new_client,
+ || (reg_config1 = i2c_smbus_read_byte_data(new_client,
LM90_REG_R_CONFIG1)) < 0
- || (reg_convrate = i2c_smbus_read_byte_data(new_client,
+ || (reg_convrate = i2c_smbus_read_byte_data(new_client,
LM90_REG_R_CONVRATE)) < 0)
+ return -ENODEV;
+
+ if ((address == 0x4C || address == 0x4D)
+ && man_id == 0x01) { /* National Semiconductor */
+ int reg_config2;
+
+ reg_config2 = i2c_smbus_read_byte_data(new_client,
+ LM90_REG_R_CONFIG2);
+ if (reg_config2 < 0)
return -ENODEV;
-
- if ((address == 0x4C || address == 0x4D)
- && man_id == 0x01) { /* National Semiconductor */
- int reg_config2;
- if ((reg_config2 = i2c_smbus_read_byte_data(new_client,
- LM90_REG_R_CONFIG2)) < 0)
- return -ENODEV;
-
- if ((reg_config1 & 0x2A) == 0x00
- && (reg_config2 & 0xF8) == 0x00
- && reg_convrate <= 0x09) {
- if (address == 0x4C
- && (chip_id & 0xF0) == 0x20) { /* LM90 */
- kind = lm90;
- } else
- if ((chip_id & 0xF0) == 0x30) { /* LM89/LM99 */
- kind = lm99;
- dev_info(&adapter->dev,
- "Assuming LM99 chip at "
- "0x%02x\n", address);
- dev_info(&adapter->dev,
- "If it is an LM89, pass "
- "force_lm86=%d,0x%02x when "
- "loading the lm90 driver\n",
- i2c_adapter_id(adapter),
- address);
- } else
- if (address == 0x4C
- && (chip_id & 0xF0) == 0x10) { /* LM86 */
- kind = lm86;
- }
- }
- } else
- if ((address == 0x4C || address == 0x4D)
- && man_id == 0x41) { /* Analog Devices */
- if ((chip_id & 0xF0) == 0x40 /* ADM1032 */
- && (reg_config1 & 0x3F) == 0x00
- && reg_convrate <= 0x0A) {
- kind = adm1032;
+ if ((reg_config1 & 0x2A) == 0x00
+ && (reg_config2 & 0xF8) == 0x00
+ && reg_convrate <= 0x09) {
+ if (address == 0x4C
+ && (chip_id & 0xF0) == 0x20) { /* LM90 */
+ name = "lm90";
} else
- if (chip_id == 0x51 /* ADT7461 */
- && (reg_config1 & 0x1B) == 0x00
- && reg_convrate <= 0x0A) {
- kind = adt7461;
- }
- } else
- if (man_id == 0x4D) { /* Maxim */
- /*
- * The MAX6657, MAX6658 and MAX6659 do NOT have a
- * chip_id register. Reading from that address will
- * return the last read value, which in our case is
- * those of the man_id register. Likewise, the config1
- * register seems to lack a low nibble, so the value
- * will be those of the previous read, so in our case
- * those of the man_id register.
- */
- if (chip_id == man_id
- && (address == 0x4C || address == 0x4D)
- && (reg_config1 & 0x1F) == (man_id & 0x0F)
- && reg_convrate <= 0x09) {
- kind = max6657;
+ if ((chip_id & 0xF0) == 0x30) { /* LM89/LM99 */
+ name = "lm99";
+ dev_info(&adapter->dev,
+ "Assuming LM99 chip at 0x%02x\n",
+ address);
+ dev_info(&adapter->dev,
+ "If it is an LM89, instantiate it "
+ "with the new_device sysfs "
+ "interface\n");
} else
- /* The chip_id register of the MAX6680 and MAX6681
- * holds the revision of the chip.
- * the lowest bit of the config1 register is unused
- * and should return zero when read, so should the
- * second to last bit of config1 (software reset)
- */
- if (chip_id == 0x01
- && (reg_config1 & 0x03) == 0x00
- && reg_convrate <= 0x07) {
- kind = max6680;
- } else
- /* The chip_id register of the MAX6646/6647/6649
- * holds the revision of the chip.
- * The lowest 6 bits of the config1 register are
- * unused and should return zero when read.
- */
- if (chip_id == 0x59
- && (reg_config1 & 0x3f) == 0x00
- && reg_convrate <= 0x07) {
- kind = max6646;
+ if (address == 0x4C
+ && (chip_id & 0xF0) == 0x10) { /* LM86 */
+ name = "lm86";
}
}
-
- if (kind <= 0) { /* identification failed */
- dev_dbg(&adapter->dev,
- "Unsupported chip at 0x%02x (man_id=0x%02X, "
- "chip_id=0x%02X)\n", address, man_id, chip_id);
- return -ENODEV;
+ } else
+ if ((address == 0x4C || address == 0x4D)
+ && man_id == 0x41) { /* Analog Devices */
+ if ((chip_id & 0xF0) == 0x40 /* ADM1032 */
+ && (reg_config1 & 0x3F) == 0x00
+ && reg_convrate <= 0x0A) {
+ name = "adm1032";
+ /* The ADM1032 supports PEC, but only if combined
+ transactions are not used. */
+ if (i2c_check_functionality(adapter,
+ I2C_FUNC_SMBUS_BYTE))
+ info->flags |= I2C_CLIENT_PEC;
+ } else
+ if (chip_id == 0x51 /* ADT7461 */
+ && (reg_config1 & 0x1B) == 0x00
+ && reg_convrate <= 0x0A) {
+ name = "adt7461";
+ }
+ } else
+ if (man_id == 0x4D) { /* Maxim */
+ /*
+ * The MAX6657, MAX6658 and MAX6659 do NOT have a chip_id
+ * register. Reading from that address will return the last
+ * read value, which in our case is those of the man_id
+ * register. Likewise, the config1 register seems to lack a
+ * low nibble, so the value will be those of the previous
+ * read, so in our case those of the man_id register.
+ */
+ if (chip_id == man_id
+ && (address == 0x4C || address == 0x4D)
+ && (reg_config1 & 0x1F) == (man_id & 0x0F)
+ && reg_convrate <= 0x09) {
+ name = "max6657";
+ } else
+ /*
+ * The chip_id register of the MAX6680 and MAX6681 holds the
+ * revision of the chip. The lowest bit of the config1 register
+ * is unused and should return zero when read, so should the
+ * second to last bit of config1 (software reset).
+ */
+ if (chip_id == 0x01
+ && (reg_config1 & 0x03) == 0x00
+ && reg_convrate <= 0x07) {
+ name = "max6680";
+ } else
+ /*
+ * The chip_id register of the MAX6646/6647/6649 holds the
+ * revision of the chip. The lowest 6 bits of the config1
+ * register are unused and should return zero when read.
+ */
+ if (chip_id == 0x59
+ && (reg_config1 & 0x3f) == 0x00
+ && reg_convrate <= 0x07) {
+ name = "max6646";
}
}
- /* Fill the i2c board info */
- if (kind == lm90) {
- name = "lm90";
- } else if (kind == adm1032) {
- name = "adm1032";
- /* The ADM1032 supports PEC, but only if combined
- transactions are not used. */
- if (i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE))
- info->flags |= I2C_CLIENT_PEC;
- } else if (kind == lm99) {
- name = "lm99";
- } else if (kind == lm86) {
- name = "lm86";
- } else if (kind == max6657) {
- name = "max6657";
- } else if (kind == max6680) {
- name = "max6680";
- } else if (kind == adt7461) {
- name = "adt7461";
- } else if (kind == max6646) {
- name = "max6646";
+ if (!name) { /* identification failed */
+ dev_dbg(&adapter->dev,
+ "Unsupported chip at 0x%02x (man_id=0x%02X, "
+ "chip_id=0x%02X)\n", address, man_id, chip_id);
+ return -ENODEV;
}
+
strlcpy(info->type, name, I2C_NAME_SIZE);
return 0;
diff --git a/drivers/hwmon/lm92.c b/drivers/hwmon/lm92.c
index b2e00c5..47ac698 100644
--- a/drivers/hwmon/lm92.c
+++ b/drivers/hwmon/lm92.c
@@ -323,31 +323,22 @@
struct i2c_board_info *info)
{
struct i2c_adapter *adapter = new_client->adapter;
+ u8 config;
+ u16 man_id;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA
| I2C_FUNC_SMBUS_WORD_DATA))
return -ENODEV;
- /* A negative kind means that the driver was loaded with no force
- parameter (default), so we must identify the chip. */
- if (kind < 0) {
- u8 config = i2c_smbus_read_byte_data(new_client,
- LM92_REG_CONFIG);
- u16 man_id = i2c_smbus_read_word_data(new_client,
- LM92_REG_MAN_ID);
+ config = i2c_smbus_read_byte_data(new_client, LM92_REG_CONFIG);
+ man_id = i2c_smbus_read_word_data(new_client, LM92_REG_MAN_ID);
- if ((config & 0xe0) == 0x00
- && man_id == 0x0180) {
- pr_info("lm92: Found National Semiconductor LM92 chip\n");
- kind = lm92;
- } else
- if (max6635_check(new_client)) {
- pr_info("lm92: Found Maxim MAX6635 chip\n");
- kind = lm92; /* No separate prefix */
- }
- else
- return -ENODEV;
- }
+ if ((config & 0xe0) == 0x00 && man_id == 0x0180)
+ pr_info("lm92: Found National Semiconductor LM92 chip\n");
+ else if (max6635_check(new_client))
+ pr_info("lm92: Found Maxim MAX6635 chip\n");
+ else
+ return -ENODEV;
strlcpy(info->type, "lm92", I2C_NAME_SIZE);
diff --git a/drivers/hwmon/lm93.c b/drivers/hwmon/lm93.c
index fc36cad..124dd7c 100644
--- a/drivers/hwmon/lm93.c
+++ b/drivers/hwmon/lm93.c
@@ -928,7 +928,7 @@
data->prochot_interval = lm93_read_byte(client,
LM93_REG_PROCHOT_INTERVAL);
- /* Fan Boost Termperature registers */
+ /* Fan Boost Temperature registers */
for (i = 0; i < 4; i++)
data->boost[i] = lm93_read_byte(client, LM93_REG_BOOST(i));
@@ -2505,34 +2505,24 @@
struct i2c_board_info *info)
{
struct i2c_adapter *adapter = client->adapter;
+ int mfr, ver;
if (!i2c_check_functionality(adapter, LM93_SMBUS_FUNC_MIN))
return -ENODEV;
/* detection */
- if (kind < 0) {
- int mfr = lm93_read_byte(client, LM93_REG_MFR_ID);
-
- if (mfr != 0x01) {
- dev_dbg(&adapter->dev,"detect failed, "
- "bad manufacturer id 0x%02x!\n", mfr);
- return -ENODEV;
- }
+ mfr = lm93_read_byte(client, LM93_REG_MFR_ID);
+ if (mfr != 0x01) {
+ dev_dbg(&adapter->dev,
+ "detect failed, bad manufacturer id 0x%02x!\n", mfr);
+ return -ENODEV;
}
- if (kind <= 0) {
- int ver = lm93_read_byte(client, LM93_REG_VER);
-
- if ((ver == LM93_MFR_ID) || (ver == LM93_MFR_ID_PROTOTYPE)) {
- kind = lm93;
- } else {
- dev_dbg(&adapter->dev,"detect failed, "
- "bad version id 0x%02x!\n", ver);
- if (kind == 0)
- dev_dbg(&adapter->dev,
- "(ignored 'force' parameter)\n");
- return -ENODEV;
- }
+ ver = lm93_read_byte(client, LM93_REG_VER);
+ if (ver != LM93_MFR_ID && ver != LM93_MFR_ID_PROTOTYPE) {
+ dev_dbg(&adapter->dev,
+ "detect failed, bad version id 0x%02x!\n", ver);
+ return -ENODEV;
}
strlcpy(info->type, "lm93", I2C_NAME_SIZE);
diff --git a/drivers/hwmon/lm95241.c b/drivers/hwmon/lm95241.c
index e34f9e4..906b896 100644
--- a/drivers/hwmon/lm95241.c
+++ b/drivers/hwmon/lm95241.c
@@ -315,51 +315,23 @@
{
struct i2c_adapter *adapter = new_client->adapter;
int address = new_client->addr;
- const char *name = "";
+ const char *name;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -ENODEV;
- /*
- * Now we do the remaining detection. A negative kind means that
- * the driver was loaded with no force parameter (default), so we
- * must both detect and identify the chip. A zero kind means that
- * the driver was loaded with the force parameter, the detection
- * step shall be skipped. A positive kind means that the driver
- * was loaded with the force parameter and a given kind of chip is
- * requested, so both the detection and the identification steps
- * are skipped.
- */
- if (kind < 0) { /* detection */
- if ((i2c_smbus_read_byte_data(new_client, LM95241_REG_R_MAN_ID)
- != MANUFACTURER_ID)
- || (i2c_smbus_read_byte_data(new_client, LM95241_REG_R_CHIP_ID)
- < DEFAULT_REVISION)) {
- dev_dbg(&adapter->dev,
- "LM95241 detection failed at 0x%02x.\n",
- address);
- return -ENODEV;
- }
- }
-
- if (kind <= 0) { /* identification */
- if ((i2c_smbus_read_byte_data(new_client, LM95241_REG_R_MAN_ID)
- == MANUFACTURER_ID)
- && (i2c_smbus_read_byte_data(new_client, LM95241_REG_R_CHIP_ID)
- >= DEFAULT_REVISION)) {
-
- kind = lm95241;
-
- if (kind <= 0) { /* identification failed */
- dev_info(&adapter->dev, "Unsupported chip\n");
- return -ENODEV;
- }
- }
+ if ((i2c_smbus_read_byte_data(new_client, LM95241_REG_R_MAN_ID)
+ == MANUFACTURER_ID)
+ && (i2c_smbus_read_byte_data(new_client, LM95241_REG_R_CHIP_ID)
+ >= DEFAULT_REVISION)) {
+ name = "lm95241";
+ } else {
+ dev_dbg(&adapter->dev, "LM95241 detection failed at 0x%02x\n",
+ address);
+ return -ENODEV;
}
/* Fill the i2c board info */
- if (kind == lm95241)
- name = "lm95241";
strlcpy(info->type, name, I2C_NAME_SIZE);
return 0;
}
diff --git a/drivers/hwmon/max1619.c b/drivers/hwmon/max1619.c
index 7897754..7fcf5ff 100644
--- a/drivers/hwmon/max1619.c
+++ b/drivers/hwmon/max1619.c
@@ -226,58 +226,34 @@
*/
/* Return 0 if detection is successful, -ENODEV otherwise */
-static int max1619_detect(struct i2c_client *new_client, int kind,
+static int max1619_detect(struct i2c_client *client, int kind,
struct i2c_board_info *info)
{
- struct i2c_adapter *adapter = new_client->adapter;
- u8 reg_config=0, reg_convrate=0, reg_status=0;
+ struct i2c_adapter *adapter = client->adapter;
+ u8 reg_config, reg_convrate, reg_status, man_id, chip_id;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -ENODEV;
- /*
- * Now we do the remaining detection. A negative kind means that
- * the driver was loaded with no force parameter (default), so we
- * must both detect and identify the chip. A zero kind means that
- * the driver was loaded with the force parameter, the detection
- * step shall be skipped. A positive kind means that the driver
- * was loaded with the force parameter and a given kind of chip is
- * requested, so both the detection and the identification steps
- * are skipped.
- */
- if (kind < 0) { /* detection */
- reg_config = i2c_smbus_read_byte_data(new_client,
- MAX1619_REG_R_CONFIG);
- reg_convrate = i2c_smbus_read_byte_data(new_client,
- MAX1619_REG_R_CONVRATE);
- reg_status = i2c_smbus_read_byte_data(new_client,
- MAX1619_REG_R_STATUS);
- if ((reg_config & 0x03) != 0x00
- || reg_convrate > 0x07 || (reg_status & 0x61 ) !=0x00) {
- dev_dbg(&adapter->dev,
- "MAX1619 detection failed at 0x%02x.\n",
- new_client->addr);
- return -ENODEV;
- }
+ /* detection */
+ reg_config = i2c_smbus_read_byte_data(client, MAX1619_REG_R_CONFIG);
+ reg_convrate = i2c_smbus_read_byte_data(client, MAX1619_REG_R_CONVRATE);
+ reg_status = i2c_smbus_read_byte_data(client, MAX1619_REG_R_STATUS);
+ if ((reg_config & 0x03) != 0x00
+ || reg_convrate > 0x07 || (reg_status & 0x61) != 0x00) {
+ dev_dbg(&adapter->dev, "MAX1619 detection failed at 0x%02x\n",
+ client->addr);
+ return -ENODEV;
}
- if (kind <= 0) { /* identification */
- u8 man_id, chip_id;
-
- man_id = i2c_smbus_read_byte_data(new_client,
- MAX1619_REG_R_MAN_ID);
- chip_id = i2c_smbus_read_byte_data(new_client,
- MAX1619_REG_R_CHIP_ID);
-
- if ((man_id == 0x4D) && (chip_id == 0x04))
- kind = max1619;
-
- if (kind <= 0) { /* identification failed */
- dev_info(&adapter->dev,
- "Unsupported chip (man_id=0x%02X, "
- "chip_id=0x%02X).\n", man_id, chip_id);
- return -ENODEV;
- }
+ /* identification */
+ man_id = i2c_smbus_read_byte_data(client, MAX1619_REG_R_MAN_ID);
+ chip_id = i2c_smbus_read_byte_data(client, MAX1619_REG_R_CHIP_ID);
+ if (man_id != 0x4D || chip_id != 0x04) {
+ dev_info(&adapter->dev,
+ "Unsupported chip (man_id=0x%02X, chip_id=0x%02X).\n",
+ man_id, chip_id);
+ return -ENODEV;
}
strlcpy(info->type, "max1619", I2C_NAME_SIZE);
diff --git a/drivers/hwmon/max6650.c b/drivers/hwmon/max6650.c
index 58f66be..1da561e 100644
--- a/drivers/hwmon/max6650.c
+++ b/drivers/hwmon/max6650.c
@@ -534,7 +534,7 @@
struct i2c_adapter *adapter = client->adapter;
int address = client->addr;
- dev_dbg(&adapter->dev, "max6650_detect called, kind = %d\n", kind);
+ dev_dbg(&adapter->dev, "max6650_detect called\n");
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
dev_dbg(&adapter->dev, "max6650: I2C bus doesn't support "
@@ -542,23 +542,7 @@
return -ENODEV;
}
- /*
- * Now we do the remaining detection. A negative kind means that
- * the driver was loaded with no force parameter (default), so we
- * must both detect and identify the chip (actually there is only
- * one possible kind of chip for now, max6650). A zero kind means that
- * the driver was loaded with the force parameter, the detection
- * step shall be skipped. A positive kind means that the driver
- * was loaded with the force parameter and a given kind of chip is
- * requested, so both the detection and the identification steps
- * are skipped.
- *
- * Currently I can find no way to distinguish between a MAX6650 and
- * a MAX6651. This driver has only been tried on the former.
- */
-
- if ((kind < 0) &&
- ( (i2c_smbus_read_byte_data(client, MAX6650_REG_CONFIG) & 0xC0)
+ if (((i2c_smbus_read_byte_data(client, MAX6650_REG_CONFIG) & 0xC0)
||(i2c_smbus_read_byte_data(client, MAX6650_REG_GPIO_STAT) & 0xE0)
||(i2c_smbus_read_byte_data(client, MAX6650_REG_ALARM_EN) & 0xE0)
||(i2c_smbus_read_byte_data(client, MAX6650_REG_ALARM) & 0xE0)
diff --git a/drivers/hwmon/mc13783-adc.c b/drivers/hwmon/mc13783-adc.c
new file mode 100644
index 0000000..883fa81
--- /dev/null
+++ b/drivers/hwmon/mc13783-adc.c
@@ -0,0 +1,236 @@
+/*
+ * Driver for the Freescale Semiconductor MC13783 adc.
+ *
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2009 Sascha Hauer, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 51
+ * Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/mfd/mc13783-private.h>
+#include <linux/platform_device.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/hwmon.h>
+#include <linux/init.h>
+#include <linux/err.h>
+
+#define MC13783_ADC_NAME "mc13783-adc"
+
+struct mc13783_adc_priv {
+ struct mc13783 *mc13783;
+ struct device *hwmon_dev;
+};
+
+static ssize_t mc13783_adc_show_name(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ return sprintf(buf, "mc13783_adc\n");
+}
+
+static int mc13783_adc_read(struct device *dev,
+ struct device_attribute *devattr, unsigned int *val)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct mc13783_adc_priv *priv = platform_get_drvdata(pdev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ unsigned int channel = attr->index;
+ unsigned int sample[4];
+ int ret;
+
+ ret = mc13783_adc_do_conversion(priv->mc13783,
+ MC13783_ADC_MODE_MULT_CHAN,
+ channel, sample);
+ if (ret)
+ return ret;
+
+ channel &= 0x7;
+
+ *val = (sample[channel % 4] >> (channel > 3 ? 14 : 2)) & 0x3ff;
+
+ return 0;
+}
+
+static ssize_t mc13783_adc_read_bp(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ unsigned val;
+ int ret = mc13783_adc_read(dev, devattr, &val);
+
+ if (ret)
+ return ret;
+
+ /*
+ * BP (channel 2) reports with offset 2.4V to the actual value to fit
+ * the input range of the ADC. unit = 2.25mV = 9/4 mV.
+ */
+ val = DIV_ROUND_CLOSEST(val * 9, 4) + 2400;
+
+ return sprintf(buf, "%u\n", val);
+}
+
+static ssize_t mc13783_adc_read_gp(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ unsigned val;
+ int ret = mc13783_adc_read(dev, devattr, &val);
+
+ if (ret)
+ return ret;
+
+ /*
+ * input range is [0, 2.3V], val has 10 bits, so each bit
+ * is worth 9/4 mV.
+ */
+ val = DIV_ROUND_CLOSEST(val * 9, 4);
+
+ return sprintf(buf, "%u\n", val);
+}
+
+static DEVICE_ATTR(name, S_IRUGO, mc13783_adc_show_name, NULL);
+static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, mc13783_adc_read_bp, NULL, 2);
+static SENSOR_DEVICE_ATTR(in5_input, S_IRUGO, mc13783_adc_read_gp, NULL, 5);
+static SENSOR_DEVICE_ATTR(in6_input, S_IRUGO, mc13783_adc_read_gp, NULL, 6);
+static SENSOR_DEVICE_ATTR(in7_input, S_IRUGO, mc13783_adc_read_gp, NULL, 7);
+static SENSOR_DEVICE_ATTR(in8_input, S_IRUGO, mc13783_adc_read_gp, NULL, 8);
+static SENSOR_DEVICE_ATTR(in9_input, S_IRUGO, mc13783_adc_read_gp, NULL, 9);
+static SENSOR_DEVICE_ATTR(in10_input, S_IRUGO, mc13783_adc_read_gp, NULL, 10);
+static SENSOR_DEVICE_ATTR(in11_input, S_IRUGO, mc13783_adc_read_gp, NULL, 11);
+static SENSOR_DEVICE_ATTR(in12_input, S_IRUGO, mc13783_adc_read_gp, NULL, 12);
+static SENSOR_DEVICE_ATTR(in13_input, S_IRUGO, mc13783_adc_read_gp, NULL, 13);
+static SENSOR_DEVICE_ATTR(in14_input, S_IRUGO, mc13783_adc_read_gp, NULL, 14);
+static SENSOR_DEVICE_ATTR(in15_input, S_IRUGO, mc13783_adc_read_gp, NULL, 15);
+
+static struct attribute *mc13783_attr[] = {
+ &dev_attr_name.attr,
+ &sensor_dev_attr_in2_input.dev_attr.attr,
+ &sensor_dev_attr_in5_input.dev_attr.attr,
+ &sensor_dev_attr_in6_input.dev_attr.attr,
+ &sensor_dev_attr_in7_input.dev_attr.attr,
+ &sensor_dev_attr_in8_input.dev_attr.attr,
+ &sensor_dev_attr_in9_input.dev_attr.attr,
+ &sensor_dev_attr_in10_input.dev_attr.attr,
+ &sensor_dev_attr_in11_input.dev_attr.attr,
+ NULL
+};
+
+static const struct attribute_group mc13783_group = {
+ .attrs = mc13783_attr,
+};
+
+/* last four channels may be occupied by the touchscreen */
+static struct attribute *mc13783_attr_ts[] = {
+ &sensor_dev_attr_in12_input.dev_attr.attr,
+ &sensor_dev_attr_in13_input.dev_attr.attr,
+ &sensor_dev_attr_in14_input.dev_attr.attr,
+ &sensor_dev_attr_in15_input.dev_attr.attr,
+ NULL
+};
+
+static const struct attribute_group mc13783_group_ts = {
+ .attrs = mc13783_attr_ts,
+};
+
+static int __init mc13783_adc_probe(struct platform_device *pdev)
+{
+ struct mc13783_adc_priv *priv;
+ int ret;
+
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->mc13783 = dev_get_drvdata(pdev->dev.parent);
+
+ platform_set_drvdata(pdev, priv);
+
+ /* Register sysfs hooks */
+ ret = sysfs_create_group(&pdev->dev.kobj, &mc13783_group);
+ if (ret)
+ goto out_err_create1;
+
+ if (!(priv->mc13783->flags & MC13783_USE_TOUCHSCREEN))
+ ret = sysfs_create_group(&pdev->dev.kobj, &mc13783_group_ts);
+ if (ret)
+ goto out_err_create2;
+
+ priv->hwmon_dev = hwmon_device_register(&pdev->dev);
+ if (IS_ERR(priv->hwmon_dev)) {
+ ret = PTR_ERR(priv->hwmon_dev);
+ dev_err(&pdev->dev,
+ "hwmon_device_register failed with %d.\n", ret);
+ goto out_err_register;
+ }
+
+
+ return 0;
+
+out_err_register:
+
+ if (!(priv->mc13783->flags & MC13783_USE_TOUCHSCREEN))
+ sysfs_remove_group(&pdev->dev.kobj, &mc13783_group_ts);
+out_err_create2:
+
+ sysfs_remove_group(&pdev->dev.kobj, &mc13783_group);
+out_err_create1:
+
+ platform_set_drvdata(pdev, NULL);
+ kfree(priv);
+
+ return ret;
+}
+
+static int __devexit mc13783_adc_remove(struct platform_device *pdev)
+{
+ struct mc13783_adc_priv *priv = platform_get_drvdata(pdev);
+
+ hwmon_device_unregister(priv->hwmon_dev);
+
+ if (!(priv->mc13783->flags & MC13783_USE_TOUCHSCREEN))
+ sysfs_remove_group(&pdev->dev.kobj, &mc13783_group_ts);
+
+ sysfs_remove_group(&pdev->dev.kobj, &mc13783_group);
+
+ platform_set_drvdata(pdev, NULL);
+ kfree(priv);
+
+ return 0;
+}
+
+static struct platform_driver mc13783_adc_driver = {
+ .remove = __devexit_p(mc13783_adc_remove),
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = MC13783_ADC_NAME,
+ },
+};
+
+static int __init mc13783_adc_init(void)
+{
+ return platform_driver_probe(&mc13783_adc_driver, mc13783_adc_probe);
+}
+
+static void __exit mc13783_adc_exit(void)
+{
+ platform_driver_unregister(&mc13783_adc_driver);
+}
+
+module_init(mc13783_adc_init);
+module_exit(mc13783_adc_exit);
+
+MODULE_DESCRIPTION("MC13783 ADC driver");
+MODULE_AUTHOR("Luotao Fu <l.fu@pengutronix.de>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" MC13783_ADC_NAME);
diff --git a/drivers/hwmon/s3c-hwmon.c b/drivers/hwmon/s3c-hwmon.c
index 7183541..3f3f9a4 100644
--- a/drivers/hwmon/s3c-hwmon.c
+++ b/drivers/hwmon/s3c-hwmon.c
@@ -323,7 +323,7 @@
}
for (i = 0; i < ARRAY_SIZE(pdata->in); i++) {
- struct s3c24xx_adc_hwmon_incfg *cfg = pdata->in[i];
+ struct s3c_hwmon_chcfg *cfg = pdata->in[i];
if (!cfg)
continue;
@@ -333,7 +333,7 @@
"channel %d multiplier too large\n",
i);
- if (cfg->divider == 0) {
+ if (cfg->div == 0) {
dev_err(&dev->dev, "channel %d divider zero\n", i);
continue;
}
diff --git a/drivers/hwmon/smsc47m192.c b/drivers/hwmon/smsc47m192.c
index 8bb5cb5..4d88c04 100644
--- a/drivers/hwmon/smsc47m192.c
+++ b/drivers/hwmon/smsc47m192.c
@@ -491,24 +491,22 @@
return -ENODEV;
/* Detection criteria from sensors_detect script */
- if (kind < 0) {
- if (i2c_smbus_read_byte_data(client,
+ version = i2c_smbus_read_byte_data(client, SMSC47M192_REG_VERSION);
+ if (i2c_smbus_read_byte_data(client,
SMSC47M192_REG_COMPANY_ID) == 0x55
- && ((version = i2c_smbus_read_byte_data(client,
- SMSC47M192_REG_VERSION)) & 0xf0) == 0x20
- && (i2c_smbus_read_byte_data(client,
+ && (version & 0xf0) == 0x20
+ && (i2c_smbus_read_byte_data(client,
SMSC47M192_REG_VID) & 0x70) == 0x00
- && (i2c_smbus_read_byte_data(client,
+ && (i2c_smbus_read_byte_data(client,
SMSC47M192_REG_VID4) & 0xfe) == 0x80) {
- dev_info(&adapter->dev,
- "found SMSC47M192 or compatible, "
- "version 2, stepping A%d\n", version & 0x0f);
- } else {
- dev_dbg(&adapter->dev,
- "SMSC47M192 detection failed at 0x%02x\n",
- client->addr);
- return -ENODEV;
- }
+ dev_info(&adapter->dev,
+ "found SMSC47M192 or compatible, "
+ "version 2, stepping A%d\n", version & 0x0f);
+ } else {
+ dev_dbg(&adapter->dev,
+ "SMSC47M192 detection failed at 0x%02x\n",
+ client->addr);
+ return -ENODEV;
}
strlcpy(info->type, "smsc47m192", I2C_NAME_SIZE);
diff --git a/drivers/hwmon/thmc50.c b/drivers/hwmon/thmc50.c
index 7d97431..4b79384 100644
--- a/drivers/hwmon/thmc50.c
+++ b/drivers/hwmon/thmc50.c
@@ -36,7 +36,11 @@
/* Insmod parameters */
I2C_CLIENT_INSMOD_2(thmc50, adm1022);
-I2C_CLIENT_MODULE_PARM(adm1022_temp3, "List of adapter,address pairs "
+
+static unsigned short adm1022_temp3[16];
+static unsigned int adm1022_temp3_num;
+module_param_array(adm1022_temp3, ushort, &adm1022_temp3_num, 0);
+MODULE_PARM_DESC(adm1022_temp3, "List of adapter,address pairs "
"to enable 3rd temperature (ADM1022 only)");
/* Many THMC50 constants specified below */
@@ -289,7 +293,6 @@
unsigned revision;
unsigned config;
struct i2c_adapter *adapter = client->adapter;
- int err = 0;
const char *type_name;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
@@ -301,31 +304,13 @@
pr_debug("thmc50: Probing for THMC50 at 0x%2X on bus %d\n",
client->addr, i2c_adapter_id(client->adapter));
- /* Now, we do the remaining detection. */
company = i2c_smbus_read_byte_data(client, THMC50_REG_COMPANY_ID);
revision = i2c_smbus_read_byte_data(client, THMC50_REG_DIE_CODE);
config = i2c_smbus_read_byte_data(client, THMC50_REG_CONF);
+ if (revision < 0xc0 || (config & 0x10))
+ return -ENODEV;
- if (kind == 0)
- kind = thmc50;
- else if (kind < 0) {
- err = -ENODEV;
- if (revision >= 0xc0 && ((config & 0x10) == 0)) {
- if (company == 0x49) {
- kind = thmc50;
- err = 0;
- } else if (company == 0x41) {
- kind = adm1022;
- err = 0;
- }
- }
- }
- if (err == -ENODEV) {
- pr_debug("thmc50: Detection of THMC50/ADM1022 failed\n");
- return err;
- }
-
- if (kind == adm1022) {
+ if (company == 0x41) {
int id = i2c_adapter_id(client->adapter);
int i;
@@ -340,9 +325,13 @@
config);
break;
}
- } else {
+ } else if (company == 0x49) {
type_name = "thmc50";
+ } else {
+ pr_debug("thmc50: Detection of THMC50/ADM1022 failed\n");
+ return -ENODEV;
}
+
pr_debug("thmc50: Detected %s (version %x, revision %x)\n",
type_name, (revision >> 4) - 0xc, revision & 0xf);
diff --git a/drivers/hwmon/tmp401.c b/drivers/hwmon/tmp401.c
index 7b34f2c..ee96734 100644
--- a/drivers/hwmon/tmp401.c
+++ b/drivers/hwmon/tmp401.c
@@ -488,46 +488,43 @@
i2c_smbus_write_byte_data(client, TMP401_CONFIG_WRITE, config);
}
-static int tmp401_detect(struct i2c_client *client, int kind,
+static int tmp401_detect(struct i2c_client *client, int _kind,
struct i2c_board_info *info)
{
+ enum chips kind;
struct i2c_adapter *adapter = client->adapter;
+ u8 reg;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -ENODEV;
/* Detect and identify the chip */
- if (kind <= 0) {
- u8 reg;
+ reg = i2c_smbus_read_byte_data(client, TMP401_MANUFACTURER_ID_REG);
+ if (reg != TMP401_MANUFACTURER_ID)
+ return -ENODEV;
- reg = i2c_smbus_read_byte_data(client,
- TMP401_MANUFACTURER_ID_REG);
- if (reg != TMP401_MANUFACTURER_ID)
- return -ENODEV;
+ reg = i2c_smbus_read_byte_data(client, TMP401_DEVICE_ID_REG);
- reg = i2c_smbus_read_byte_data(client, TMP401_DEVICE_ID_REG);
-
- switch (reg) {
- case TMP401_DEVICE_ID:
- kind = tmp401;
- break;
- case TMP411_DEVICE_ID:
- kind = tmp411;
- break;
- default:
- return -ENODEV;
- }
-
- reg = i2c_smbus_read_byte_data(client, TMP401_CONFIG_READ);
- if (reg & 0x1b)
- return -ENODEV;
-
- reg = i2c_smbus_read_byte_data(client,
- TMP401_CONVERSION_RATE_READ);
- /* Datasheet says: 0x1-0x6 */
- if (reg > 15)
- return -ENODEV;
+ switch (reg) {
+ case TMP401_DEVICE_ID:
+ kind = tmp401;
+ break;
+ case TMP411_DEVICE_ID:
+ kind = tmp411;
+ break;
+ default:
+ return -ENODEV;
}
+
+ reg = i2c_smbus_read_byte_data(client, TMP401_CONFIG_READ);
+ if (reg & 0x1b)
+ return -ENODEV;
+
+ reg = i2c_smbus_read_byte_data(client, TMP401_CONVERSION_RATE_READ);
+ /* Datasheet says: 0x1-0x6 */
+ if (reg > 15)
+ return -ENODEV;
+
strlcpy(info->type, tmp401_id[kind - 1].name, I2C_NAME_SIZE);
return 0;
diff --git a/drivers/hwmon/tmp421.c b/drivers/hwmon/tmp421.c
index 2092434..bb5464a 100644
--- a/drivers/hwmon/tmp421.c
+++ b/drivers/hwmon/tmp421.c
@@ -223,39 +223,36 @@
return 0;
}
-static int tmp421_detect(struct i2c_client *client, int kind,
+static int tmp421_detect(struct i2c_client *client, int _kind,
struct i2c_board_info *info)
{
+ enum chips kind;
struct i2c_adapter *adapter = client->adapter;
const char *names[] = { "TMP421", "TMP422", "TMP423" };
+ u8 reg;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -ENODEV;
- if (kind <= 0) {
- u8 reg;
+ reg = i2c_smbus_read_byte_data(client, TMP421_MANUFACTURER_ID_REG);
+ if (reg != TMP421_MANUFACTURER_ID)
+ return -ENODEV;
- reg = i2c_smbus_read_byte_data(client,
- TMP421_MANUFACTURER_ID_REG);
- if (reg != TMP421_MANUFACTURER_ID)
- return -ENODEV;
-
- reg = i2c_smbus_read_byte_data(client,
- TMP421_DEVICE_ID_REG);
- switch (reg) {
- case TMP421_DEVICE_ID:
- kind = tmp421;
- break;
- case TMP422_DEVICE_ID:
- kind = tmp422;
- break;
- case TMP423_DEVICE_ID:
- kind = tmp423;
- break;
- default:
- return -ENODEV;
- }
+ reg = i2c_smbus_read_byte_data(client, TMP421_DEVICE_ID_REG);
+ switch (reg) {
+ case TMP421_DEVICE_ID:
+ kind = tmp421;
+ break;
+ case TMP422_DEVICE_ID:
+ kind = tmp422;
+ break;
+ case TMP423_DEVICE_ID:
+ kind = tmp423;
+ break;
+ default:
+ return -ENODEV;
}
+
strlcpy(info->type, tmp421_id[kind - 1].name, I2C_NAME_SIZE);
dev_info(&adapter->dev, "Detected TI %s chip at 0x%02x\n",
names[kind - 1], client->addr);
diff --git a/drivers/hwmon/w83627hf.c b/drivers/hwmon/w83627hf.c
index 2be28ac..b257c72 100644
--- a/drivers/hwmon/w83627hf.c
+++ b/drivers/hwmon/w83627hf.c
@@ -59,10 +59,11 @@
#define DRVNAME "w83627hf"
enum chips { w83627hf, w83627thf, w83697hf, w83637hf, w83687thf };
-static u16 force_addr;
-module_param(force_addr, ushort, 0);
-MODULE_PARM_DESC(force_addr,
- "Initialize the base address of the sensors");
+struct w83627hf_sio_data {
+ enum chips type;
+ int sioaddr;
+};
+
static u8 force_i2c = 0x1f;
module_param(force_i2c, byte, 0);
MODULE_PARM_DESC(force_i2c,
@@ -77,9 +78,7 @@
MODULE_PARM_DESC(force_id, "Override the detected device ID");
/* modified from kernel/include/traps.c */
-static int REG; /* The register to read/write */
#define DEV 0x07 /* Register: Logical device select */
-static int VAL; /* The value to read/write */
/* logical device numbers for superio_select (below) */
#define W83627HF_LD_FDC 0x00
@@ -109,37 +108,37 @@
#define W83687THF_VID_DATA 0xF1 /* w83687thf only */
static inline void
-superio_outb(int reg, int val)
+superio_outb(struct w83627hf_sio_data *sio, int reg, int val)
{
- outb(reg, REG);
- outb(val, VAL);
+ outb(reg, sio->sioaddr);
+ outb(val, sio->sioaddr + 1);
}
static inline int
-superio_inb(int reg)
+superio_inb(struct w83627hf_sio_data *sio, int reg)
{
- outb(reg, REG);
- return inb(VAL);
+ outb(reg, sio->sioaddr);
+ return inb(sio->sioaddr + 1);
}
static inline void
-superio_select(int ld)
+superio_select(struct w83627hf_sio_data *sio, int ld)
{
- outb(DEV, REG);
- outb(ld, VAL);
+ outb(DEV, sio->sioaddr);
+ outb(ld, sio->sioaddr + 1);
}
static inline void
-superio_enter(void)
+superio_enter(struct w83627hf_sio_data *sio)
{
- outb(0x87, REG);
- outb(0x87, REG);
+ outb(0x87, sio->sioaddr);
+ outb(0x87, sio->sioaddr);
}
static inline void
-superio_exit(void)
+superio_exit(struct w83627hf_sio_data *sio)
{
- outb(0xAA, REG);
+ outb(0xAA, sio->sioaddr);
}
#define W627_DEVID 0x52
@@ -380,10 +379,6 @@
u8 vrm_ovt; /* Register value, 627THF/637HF/687THF only */
};
-struct w83627hf_sio_data {
- enum chips type;
-};
-
static int w83627hf_probe(struct platform_device *pdev);
static int __devexit w83627hf_remove(struct platform_device *pdev);
@@ -1140,11 +1135,8 @@
"W83687THF",
};
- REG = sioaddr;
- VAL = sioaddr + 1;
-
- superio_enter();
- val = force_id ? force_id : superio_inb(DEVID);
+ superio_enter(sio_data);
+ val = force_id ? force_id : superio_inb(sio_data, DEVID);
switch (val) {
case W627_DEVID:
sio_data->type = w83627hf;
@@ -1168,16 +1160,9 @@
goto exit;
}
- superio_select(W83627HF_LD_HWM);
- force_addr &= WINB_ALIGNMENT;
- if (force_addr) {
- printk(KERN_WARNING DRVNAME ": Forcing address 0x%x\n",
- force_addr);
- superio_outb(WINB_BASE_REG, force_addr >> 8);
- superio_outb(WINB_BASE_REG + 1, force_addr & 0xff);
- }
- val = (superio_inb(WINB_BASE_REG) << 8) |
- superio_inb(WINB_BASE_REG + 1);
+ superio_select(sio_data, W83627HF_LD_HWM);
+ val = (superio_inb(sio_data, WINB_BASE_REG) << 8) |
+ superio_inb(sio_data, WINB_BASE_REG + 1);
*addr = val & WINB_ALIGNMENT;
if (*addr == 0) {
printk(KERN_WARNING DRVNAME ": Base address not set, "
@@ -1185,18 +1170,19 @@
goto exit;
}
- val = superio_inb(WINB_ACT_REG);
+ val = superio_inb(sio_data, WINB_ACT_REG);
if (!(val & 0x01)) {
printk(KERN_WARNING DRVNAME ": Enabling HWM logical device\n");
- superio_outb(WINB_ACT_REG, val | 0x01);
+ superio_outb(sio_data, WINB_ACT_REG, val | 0x01);
}
err = 0;
+ sio_data->sioaddr = sioaddr;
pr_info(DRVNAME ": Found %s chip at %#x\n",
names[sio_data->type], *addr);
exit:
- superio_exit();
+ superio_exit(sio_data);
return err;
}
@@ -1511,20 +1497,21 @@
static int __devinit w83627thf_read_gpio5(struct platform_device *pdev)
{
+ struct w83627hf_sio_data *sio_data = pdev->dev.platform_data;
int res = 0xff, sel;
- superio_enter();
- superio_select(W83627HF_LD_GPIO5);
+ superio_enter(sio_data);
+ superio_select(sio_data, W83627HF_LD_GPIO5);
/* Make sure these GPIO pins are enabled */
- if (!(superio_inb(W83627THF_GPIO5_EN) & (1<<3))) {
+ if (!(superio_inb(sio_data, W83627THF_GPIO5_EN) & (1<<3))) {
dev_dbg(&pdev->dev, "GPIO5 disabled, no VID function\n");
goto exit;
}
/* Make sure the pins are configured for input
There must be at least five (VRM 9), and possibly 6 (VRM 10) */
- sel = superio_inb(W83627THF_GPIO5_IOSR) & 0x3f;
+ sel = superio_inb(sio_data, W83627THF_GPIO5_IOSR) & 0x3f;
if ((sel & 0x1f) != 0x1f) {
dev_dbg(&pdev->dev, "GPIO5 not configured for VID "
"function\n");
@@ -1532,37 +1519,38 @@
}
dev_info(&pdev->dev, "Reading VID from GPIO5\n");
- res = superio_inb(W83627THF_GPIO5_DR) & sel;
+ res = superio_inb(sio_data, W83627THF_GPIO5_DR) & sel;
exit:
- superio_exit();
+ superio_exit(sio_data);
return res;
}
static int __devinit w83687thf_read_vid(struct platform_device *pdev)
{
+ struct w83627hf_sio_data *sio_data = pdev->dev.platform_data;
int res = 0xff;
- superio_enter();
- superio_select(W83627HF_LD_HWM);
+ superio_enter(sio_data);
+ superio_select(sio_data, W83627HF_LD_HWM);
/* Make sure these GPIO pins are enabled */
- if (!(superio_inb(W83687THF_VID_EN) & (1 << 2))) {
+ if (!(superio_inb(sio_data, W83687THF_VID_EN) & (1 << 2))) {
dev_dbg(&pdev->dev, "VID disabled, no VID function\n");
goto exit;
}
/* Make sure the pins are configured for input */
- if (!(superio_inb(W83687THF_VID_CFG) & (1 << 4))) {
+ if (!(superio_inb(sio_data, W83687THF_VID_CFG) & (1 << 4))) {
dev_dbg(&pdev->dev, "VID configured as output, "
"no VID function\n");
goto exit;
}
- res = superio_inb(W83687THF_VID_DATA) & 0x3f;
+ res = superio_inb(sio_data, W83687THF_VID_DATA) & 0x3f;
exit:
- superio_exit();
+ superio_exit(sio_data);
return res;
}
diff --git a/drivers/hwmon/w83781d.c b/drivers/hwmon/w83781d.c
index d27ed1b..7ab7967 100644
--- a/drivers/hwmon/w83781d.c
+++ b/drivers/hwmon/w83781d.c
@@ -1054,11 +1054,11 @@
w83781d_detect(struct i2c_client *client, int kind,
struct i2c_board_info *info)
{
- int val1 = 0, val2;
+ int val1, val2;
struct w83781d_data *isa = w83781d_data_if_isa();
struct i2c_adapter *adapter = client->adapter;
int address = client->addr;
- const char *client_name = "";
+ const char *client_name;
enum vendor { winbond, asus } vendid;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
@@ -1070,98 +1070,73 @@
if (isa)
mutex_lock(&isa->update_lock);
- /* The w8378?d may be stuck in some other bank than bank 0. This may
- make reading other information impossible. Specify a force=... or
- force_*=... parameter, and the Winbond will be reset to the right
- bank. */
- if (kind < 0) {
- if (i2c_smbus_read_byte_data
- (client, W83781D_REG_CONFIG) & 0x80) {
- dev_dbg(&adapter->dev, "Detection of w83781d chip "
- "failed at step 3\n");
+ if (i2c_smbus_read_byte_data(client, W83781D_REG_CONFIG) & 0x80) {
+ dev_dbg(&adapter->dev,
+ "Detection of w83781d chip failed at step 3\n");
+ goto err_nodev;
+ }
+
+ val1 = i2c_smbus_read_byte_data(client, W83781D_REG_BANK);
+ val2 = i2c_smbus_read_byte_data(client, W83781D_REG_CHIPMAN);
+ /* Check for Winbond or Asus ID if in bank 0 */
+ if (!(val1 & 0x07) &&
+ ((!(val1 & 0x80) && val2 != 0xa3 && val2 != 0xc3) ||
+ ( (val1 & 0x80) && val2 != 0x5c && val2 != 0x12))) {
+ dev_dbg(&adapter->dev,
+ "Detection of w83781d chip failed at step 4\n");
+ goto err_nodev;
+ }
+ /* If Winbond SMBus, check address at 0x48.
+ Asus doesn't support, except for as99127f rev.2 */
+ if ((!(val1 & 0x80) && val2 == 0xa3) ||
+ ( (val1 & 0x80) && val2 == 0x5c)) {
+ if (i2c_smbus_read_byte_data(client, W83781D_REG_I2C_ADDR)
+ != address) {
+ dev_dbg(&adapter->dev,
+ "Detection of w83781d chip failed at step 5\n");
goto err_nodev;
}
- val1 = i2c_smbus_read_byte_data(client, W83781D_REG_BANK);
- val2 = i2c_smbus_read_byte_data(client, W83781D_REG_CHIPMAN);
- /* Check for Winbond or Asus ID if in bank 0 */
- if ((!(val1 & 0x07)) &&
- (((!(val1 & 0x80)) && (val2 != 0xa3) && (val2 != 0xc3))
- || ((val1 & 0x80) && (val2 != 0x5c) && (val2 != 0x12)))) {
- dev_dbg(&adapter->dev, "Detection of w83781d chip "
- "failed at step 4\n");
- goto err_nodev;
- }
- /* If Winbond SMBus, check address at 0x48.
- Asus doesn't support, except for as99127f rev.2 */
- if ((!(val1 & 0x80) && (val2 == 0xa3)) ||
- ((val1 & 0x80) && (val2 == 0x5c))) {
- if (i2c_smbus_read_byte_data
- (client, W83781D_REG_I2C_ADDR) != address) {
- dev_dbg(&adapter->dev, "Detection of w83781d "
- "chip failed at step 5\n");
- goto err_nodev;
- }
- }
}
- /* We have either had a force parameter, or we have already detected the
- Winbond. Put it now into bank 0 and Vendor ID High Byte */
+ /* Put it now into bank 0 and Vendor ID High Byte */
i2c_smbus_write_byte_data(client, W83781D_REG_BANK,
(i2c_smbus_read_byte_data(client, W83781D_REG_BANK)
& 0x78) | 0x80);
+ /* Get the vendor ID */
+ val2 = i2c_smbus_read_byte_data(client, W83781D_REG_CHIPMAN);
+ if (val2 == 0x5c)
+ vendid = winbond;
+ else if (val2 == 0x12)
+ vendid = asus;
+ else {
+ dev_dbg(&adapter->dev,
+ "w83781d chip vendor is neither Winbond nor Asus\n");
+ goto err_nodev;
+ }
+
/* Determine the chip type. */
- if (kind <= 0) {
- /* get vendor ID */
- val2 = i2c_smbus_read_byte_data(client, W83781D_REG_CHIPMAN);
- if (val2 == 0x5c)
- vendid = winbond;
- else if (val2 == 0x12)
- vendid = asus;
- else {
- dev_dbg(&adapter->dev, "w83781d chip vendor is "
- "neither Winbond nor Asus\n");
- goto err_nodev;
- }
+ val1 = i2c_smbus_read_byte_data(client, W83781D_REG_WCHIPID);
+ if ((val1 == 0x10 || val1 == 0x11) && vendid == winbond)
+ client_name = "w83781d";
+ else if (val1 == 0x30 && vendid == winbond)
+ client_name = "w83782d";
+ else if (val1 == 0x40 && vendid == winbond && address == 0x2d)
+ client_name = "w83783s";
+ else if (val1 == 0x31)
+ client_name = "as99127f";
+ else
+ goto err_nodev;
- val1 = i2c_smbus_read_byte_data(client, W83781D_REG_WCHIPID);
- if ((val1 == 0x10 || val1 == 0x11) && vendid == winbond)
- kind = w83781d;
- else if (val1 == 0x30 && vendid == winbond)
- kind = w83782d;
- else if (val1 == 0x40 && vendid == winbond && address == 0x2d)
- kind = w83783s;
- else if (val1 == 0x31)
- kind = as99127f;
- else {
- if (kind == 0)
- dev_warn(&adapter->dev, "Ignoring 'force' "
- "parameter for unknown chip at "
- "address 0x%02x\n", address);
- goto err_nodev;
- }
-
- if ((kind == w83781d || kind == w83782d)
- && w83781d_alias_detect(client, val1)) {
- dev_dbg(&adapter->dev, "Device at 0x%02x appears to "
- "be the same as ISA device\n", address);
- goto err_nodev;
- }
+ if (val1 <= 0x30 && w83781d_alias_detect(client, val1)) {
+ dev_dbg(&adapter->dev, "Device at 0x%02x appears to "
+ "be the same as ISA device\n", address);
+ goto err_nodev;
}
if (isa)
mutex_unlock(&isa->update_lock);
- if (kind == w83781d) {
- client_name = "w83781d";
- } else if (kind == w83782d) {
- client_name = "w83782d";
- } else if (kind == w83783s) {
- client_name = "w83783s";
- } else if (kind == as99127f) {
- client_name = "as99127f";
- }
-
strlcpy(info->type, client_name, I2C_NAME_SIZE);
return 0;
diff --git a/drivers/hwmon/w83791d.c b/drivers/hwmon/w83791d.c
index 97851c5..0410bf1 100644
--- a/drivers/hwmon/w83791d.c
+++ b/drivers/hwmon/w83791d.c
@@ -1270,56 +1270,32 @@
return -ENODEV;
}
- /* The w83791d may be stuck in some other bank than bank 0. This may
- make reading other information impossible. Specify a force=...
- parameter, and the Winbond will be reset to the right bank. */
- if (kind < 0) {
- if (w83791d_read(client, W83791D_REG_CONFIG) & 0x80) {
- return -ENODEV;
- }
- val1 = w83791d_read(client, W83791D_REG_BANK);
- val2 = w83791d_read(client, W83791D_REG_CHIPMAN);
- /* Check for Winbond ID if in bank 0 */
- if (!(val1 & 0x07)) {
- /* yes it is Bank0 */
- if (((!(val1 & 0x80)) && (val2 != 0xa3)) ||
- ((val1 & 0x80) && (val2 != 0x5c))) {
- return -ENODEV;
- }
- }
- /* If Winbond chip, address of chip and W83791D_REG_I2C_ADDR
- should match */
- if (w83791d_read(client, W83791D_REG_I2C_ADDR) != address) {
+ if (w83791d_read(client, W83791D_REG_CONFIG) & 0x80)
+ return -ENODEV;
+
+ val1 = w83791d_read(client, W83791D_REG_BANK);
+ val2 = w83791d_read(client, W83791D_REG_CHIPMAN);
+ /* Check for Winbond ID if in bank 0 */
+ if (!(val1 & 0x07)) {
+ if ((!(val1 & 0x80) && val2 != 0xa3) ||
+ ( (val1 & 0x80) && val2 != 0x5c)) {
return -ENODEV;
}
}
+ /* If Winbond chip, address of chip and W83791D_REG_I2C_ADDR
+ should match */
+ if (w83791d_read(client, W83791D_REG_I2C_ADDR) != address)
+ return -ENODEV;
- /* We either have a force parameter or we have reason to
- believe it is a Winbond chip. Either way, we want bank 0 and
- Vendor ID high byte */
+ /* We want bank 0 and Vendor ID high byte */
val1 = w83791d_read(client, W83791D_REG_BANK) & 0x78;
w83791d_write(client, W83791D_REG_BANK, val1 | 0x80);
/* Verify it is a Winbond w83791d */
- if (kind <= 0) {
- /* get vendor ID */
- val2 = w83791d_read(client, W83791D_REG_CHIPMAN);
- if (val2 != 0x5c) { /* the vendor is NOT Winbond */
- return -ENODEV;
- }
- val1 = w83791d_read(client, W83791D_REG_WCHIPID);
- if (val1 == 0x71) {
- kind = w83791d;
- } else {
- if (kind == 0)
- dev_warn(&adapter->dev,
- "w83791d: Ignoring 'force' parameter "
- "for unknown chip at adapter %d, "
- "address 0x%02x\n",
- i2c_adapter_id(adapter), address);
- return -ENODEV;
- }
- }
+ val1 = w83791d_read(client, W83791D_REG_WCHIPID);
+ val2 = w83791d_read(client, W83791D_REG_CHIPMAN);
+ if (val1 != 0x71 || val2 != 0x5c)
+ return -ENODEV;
strlcpy(info->type, "w83791d", I2C_NAME_SIZE);
diff --git a/drivers/hwmon/w83792d.c b/drivers/hwmon/w83792d.c
index 2be1619..3897885 100644
--- a/drivers/hwmon/w83792d.c
+++ b/drivers/hwmon/w83792d.c
@@ -1273,58 +1273,33 @@
return -ENODEV;
}
- /* The w83792d may be stuck in some other bank than bank 0. This may
- make reading other information impossible. Specify a force=... or
- force_*=... parameter, and the Winbond will be reset to the right
- bank. */
- if (kind < 0) {
- if (w83792d_read_value(client, W83792D_REG_CONFIG) & 0x80) {
- return -ENODEV;
- }
- val1 = w83792d_read_value(client, W83792D_REG_BANK);
- val2 = w83792d_read_value(client, W83792D_REG_CHIPMAN);
- /* Check for Winbond ID if in bank 0 */
- if (!(val1 & 0x07)) { /* is Bank0 */
- if (((!(val1 & 0x80)) && (val2 != 0xa3)) ||
- ((val1 & 0x80) && (val2 != 0x5c))) {
- return -ENODEV;
- }
- }
- /* If Winbond chip, address of chip and W83792D_REG_I2C_ADDR
- should match */
- if (w83792d_read_value(client,
- W83792D_REG_I2C_ADDR) != address) {
- return -ENODEV;
- }
- }
+ if (w83792d_read_value(client, W83792D_REG_CONFIG) & 0x80)
+ return -ENODEV;
- /* We have either had a force parameter, or we have already detected the
- Winbond. Put it now into bank 0 and Vendor ID High Byte */
+ val1 = w83792d_read_value(client, W83792D_REG_BANK);
+ val2 = w83792d_read_value(client, W83792D_REG_CHIPMAN);
+ /* Check for Winbond ID if in bank 0 */
+ if (!(val1 & 0x07)) { /* is Bank0 */
+ if ((!(val1 & 0x80) && val2 != 0xa3) ||
+ ( (val1 & 0x80) && val2 != 0x5c))
+ return -ENODEV;
+ }
+ /* If Winbond chip, address of chip and W83792D_REG_I2C_ADDR
+ should match */
+ if (w83792d_read_value(client, W83792D_REG_I2C_ADDR) != address)
+ return -ENODEV;
+
+ /* Put it now into bank 0 and Vendor ID High Byte */
w83792d_write_value(client,
W83792D_REG_BANK,
(w83792d_read_value(client,
W83792D_REG_BANK) & 0x78) | 0x80);
/* Determine the chip type. */
- if (kind <= 0) {
- /* get vendor ID */
- val2 = w83792d_read_value(client, W83792D_REG_CHIPMAN);
- if (val2 != 0x5c) { /* the vendor is NOT Winbond */
- return -ENODEV;
- }
- val1 = w83792d_read_value(client, W83792D_REG_WCHIPID);
- if (val1 == 0x7a) {
- kind = w83792d;
- } else {
- if (kind == 0)
- dev_warn(&adapter->dev,
- "w83792d: Ignoring 'force' parameter for"
- " unknown chip at adapter %d, address"
- " 0x%02x\n", i2c_adapter_id(adapter),
- address);
- return -ENODEV;
- }
- }
+ val1 = w83792d_read_value(client, W83792D_REG_WCHIPID);
+ val2 = w83792d_read_value(client, W83792D_REG_CHIPMAN);
+ if (val1 != 0x7a || val2 != 0x5c)
+ return -ENODEV;
strlcpy(info->type, "w83792d", I2C_NAME_SIZE);
diff --git a/drivers/hwmon/w83793.c b/drivers/hwmon/w83793.c
index 47dd398..80a2191 100644
--- a/drivers/hwmon/w83793.c
+++ b/drivers/hwmon/w83793.c
@@ -1164,7 +1164,7 @@
static int w83793_detect(struct i2c_client *client, int kind,
struct i2c_board_info *info)
{
- u8 tmp, bank;
+ u8 tmp, bank, chip_id;
struct i2c_adapter *adapter = client->adapter;
unsigned short address = client->addr;
@@ -1174,44 +1174,27 @@
bank = i2c_smbus_read_byte_data(client, W83793_REG_BANKSEL);
- if (kind < 0) {
- tmp = bank & 0x80 ? 0x5c : 0xa3;
- /* Check Winbond vendor ID */
- if (tmp != i2c_smbus_read_byte_data(client,
- W83793_REG_VENDORID)) {
- pr_debug("w83793: Detection failed at check "
- "vendor id\n");
- return -ENODEV;
- }
-
- /* If Winbond chip, address of chip and W83793_REG_I2C_ADDR
- should match */
- if ((bank & 0x07) == 0
- && i2c_smbus_read_byte_data(client, W83793_REG_I2C_ADDR) !=
- (address << 1)) {
- pr_debug("w83793: Detection failed at check "
- "i2c addr\n");
- return -ENODEV;
- }
-
+ tmp = bank & 0x80 ? 0x5c : 0xa3;
+ /* Check Winbond vendor ID */
+ if (tmp != i2c_smbus_read_byte_data(client, W83793_REG_VENDORID)) {
+ pr_debug("w83793: Detection failed at check vendor id\n");
+ return -ENODEV;
}
- /* We have either had a force parameter, or we have already detected the
- Winbond. Determine the chip type now */
-
- if (kind <= 0) {
- if (0x7b == i2c_smbus_read_byte_data(client,
- W83793_REG_CHIPID)) {
- kind = w83793;
- } else {
- if (kind == 0)
- dev_warn(&adapter->dev, "w83793: Ignoring "
- "'force' parameter for unknown chip "
- "at address 0x%02x\n", address);
- return -ENODEV;
- }
+ /* If Winbond chip, address of chip and W83793_REG_I2C_ADDR
+ should match */
+ if ((bank & 0x07) == 0
+ && i2c_smbus_read_byte_data(client, W83793_REG_I2C_ADDR) !=
+ (address << 1)) {
+ pr_debug("w83793: Detection failed at check i2c addr\n");
+ return -ENODEV;
}
+ /* Determine the chip type now */
+ chip_id = i2c_smbus_read_byte_data(client, W83793_REG_CHIPID);
+ if (chip_id != 0x7b)
+ return -ENODEV;
+
strlcpy(info->type, "w83793", I2C_NAME_SIZE);
return 0;
diff --git a/drivers/hwmon/w83l785ts.c b/drivers/hwmon/w83l785ts.c
index ea295b9..9b6c4c1 100644
--- a/drivers/hwmon/w83l785ts.c
+++ b/drivers/hwmon/w83l785ts.c
@@ -1,7 +1,7 @@
/*
* w83l785ts.c - Part of lm_sensors, Linux kernel modules for hardware
* monitoring
- * Copyright (C) 2003-2004 Jean Delvare <khali@linux-fr.org>
+ * Copyright (C) 2003-2009 Jean Delvare <khali@linux-fr.org>
*
* Inspired from the lm83 driver. The W83L785TS-S is a sensor chip made
* by Winbond. It reports a single external temperature with a 1 deg
@@ -146,60 +146,36 @@
*/
/* Return 0 if detection is successful, -ENODEV otherwise */
-static int w83l785ts_detect(struct i2c_client *new_client, int kind,
+static int w83l785ts_detect(struct i2c_client *client, int kind,
struct i2c_board_info *info)
{
- struct i2c_adapter *adapter = new_client->adapter;
+ struct i2c_adapter *adapter = client->adapter;
+ u16 man_id;
+ u8 chip_id;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -ENODEV;
- /*
- * Now we do the remaining detection. A negative kind means that
- * the driver was loaded with no force parameter (default), so we
- * must both detect and identify the chip (actually there is only
- * one possible kind of chip for now, W83L785TS-S). A zero kind means
- * that the driver was loaded with the force parameter, the detection
- * step shall be skipped. A positive kind means that the driver
- * was loaded with the force parameter and a given kind of chip is
- * requested, so both the detection and the identification steps
- * are skipped.
- */
- if (kind < 0) { /* detection */
- if (((w83l785ts_read_value(new_client,
- W83L785TS_REG_CONFIG, 0) & 0x80) != 0x00)
- || ((w83l785ts_read_value(new_client,
- W83L785TS_REG_TYPE, 0) & 0xFC) != 0x00)) {
- dev_dbg(&adapter->dev,
- "W83L785TS-S detection failed at 0x%02x.\n",
- new_client->addr);
- return -ENODEV;
- }
+ /* detection */
+ if ((w83l785ts_read_value(client, W83L785TS_REG_CONFIG, 0) & 0x80)
+ || (w83l785ts_read_value(client, W83L785TS_REG_TYPE, 0) & 0xFC)) {
+ dev_dbg(&adapter->dev,
+ "W83L785TS-S detection failed at 0x%02x\n",
+ client->addr);
+ return -ENODEV;
}
- if (kind <= 0) { /* identification */
- u16 man_id;
- u8 chip_id;
+ /* Identification */
+ man_id = (w83l785ts_read_value(client, W83L785TS_REG_MAN_ID1, 0) << 8)
+ + w83l785ts_read_value(client, W83L785TS_REG_MAN_ID2, 0);
+ chip_id = w83l785ts_read_value(client, W83L785TS_REG_CHIP_ID, 0);
- man_id = (w83l785ts_read_value(new_client,
- W83L785TS_REG_MAN_ID1, 0) << 8) +
- w83l785ts_read_value(new_client,
- W83L785TS_REG_MAN_ID2, 0);
- chip_id = w83l785ts_read_value(new_client,
- W83L785TS_REG_CHIP_ID, 0);
-
- if (man_id == 0x5CA3) { /* Winbond */
- if (chip_id == 0x70) { /* W83L785TS-S */
- kind = w83l785ts;
- }
- }
-
- if (kind <= 0) { /* identification failed */
- dev_info(&adapter->dev,
- "Unsupported chip (man_id=0x%04X, "
- "chip_id=0x%02X).\n", man_id, chip_id);
- return -ENODEV;
- }
+ if (man_id != 0x5CA3 /* Winbond */
+ || chip_id != 0x70) { /* W83L785TS-S */
+ dev_dbg(&adapter->dev,
+ "Unsupported chip (man_id=0x%04X, chip_id=0x%02X)\n",
+ man_id, chip_id);
+ return -ENODEV;
}
strlcpy(info->type, "w83l785ts", I2C_NAME_SIZE);
diff --git a/drivers/hwmon/w83l786ng.c b/drivers/hwmon/w83l786ng.c
index badca76..27da7d2 100644
--- a/drivers/hwmon/w83l786ng.c
+++ b/drivers/hwmon/w83l786ng.c
@@ -590,53 +590,31 @@
struct i2c_board_info *info)
{
struct i2c_adapter *adapter = client->adapter;
+ u16 man_id;
+ u8 chip_id;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
return -ENODEV;
}
- /*
- * Now we do the remaining detection. A negative kind means that
- * the driver was loaded with no force parameter (default), so we
- * must both detect and identify the chip (actually there is only
- * one possible kind of chip for now, W83L786NG). A zero kind means
- * that the driver was loaded with the force parameter, the detection
- * step shall be skipped. A positive kind means that the driver
- * was loaded with the force parameter and a given kind of chip is
- * requested, so both the detection and the identification steps
- * are skipped.
- */
- if (kind < 0) { /* detection */
- if (((w83l786ng_read_value(client,
- W83L786NG_REG_CONFIG) & 0x80) != 0x00)) {
- dev_dbg(&adapter->dev,
- "W83L786NG detection failed at 0x%02x.\n",
- client->addr);
- return -ENODEV;
- }
+ /* Detection */
+ if ((w83l786ng_read_value(client, W83L786NG_REG_CONFIG) & 0x80)) {
+ dev_dbg(&adapter->dev, "W83L786NG detection failed at 0x%02x\n",
+ client->addr);
+ return -ENODEV;
}
- if (kind <= 0) { /* identification */
- u16 man_id;
- u8 chip_id;
+ /* Identification */
+ man_id = (w83l786ng_read_value(client, W83L786NG_REG_MAN_ID1) << 8) +
+ w83l786ng_read_value(client, W83L786NG_REG_MAN_ID2);
+ chip_id = w83l786ng_read_value(client, W83L786NG_REG_CHIP_ID);
- man_id = (w83l786ng_read_value(client,
- W83L786NG_REG_MAN_ID1) << 8) +
- w83l786ng_read_value(client, W83L786NG_REG_MAN_ID2);
- chip_id = w83l786ng_read_value(client, W83L786NG_REG_CHIP_ID);
-
- if (man_id == 0x5CA3) { /* Winbond */
- if (chip_id == 0x80) { /* W83L786NG */
- kind = w83l786ng;
- }
- }
-
- if (kind <= 0) { /* identification failed */
- dev_info(&adapter->dev,
- "Unsupported chip (man_id=0x%04X, "
- "chip_id=0x%02X).\n", man_id, chip_id);
- return -ENODEV;
- }
+ if (man_id != 0x5CA3 || /* Winbond */
+ chip_id != 0x80) { /* W83L786NG */
+ dev_dbg(&adapter->dev,
+ "Unsupported chip (man_id=0x%04X, chip_id=0x%02X)\n",
+ man_id, chip_id);
+ return -ENODEV;
}
strlcpy(info->type, "w83l786ng", I2C_NAME_SIZE);
diff --git a/drivers/i2c/busses/i2c-designware.c b/drivers/i2c/busses/i2c-designware.c
index b444762..9e18ef9 100644
--- a/drivers/i2c/busses/i2c-designware.c
+++ b/drivers/i2c/busses/i2c-designware.c
@@ -1,5 +1,5 @@
/*
- * Synopsys Designware I2C adapter driver (master only).
+ * Synopsys DesignWare I2C adapter driver (master only).
*
* Based on the TI DAVINCI I2C adapter driver.
*
@@ -49,7 +49,20 @@
#define DW_IC_FS_SCL_LCNT 0x20
#define DW_IC_INTR_STAT 0x2c
#define DW_IC_INTR_MASK 0x30
+#define DW_IC_RAW_INTR_STAT 0x34
+#define DW_IC_RX_TL 0x38
+#define DW_IC_TX_TL 0x3c
#define DW_IC_CLR_INTR 0x40
+#define DW_IC_CLR_RX_UNDER 0x44
+#define DW_IC_CLR_RX_OVER 0x48
+#define DW_IC_CLR_TX_OVER 0x4c
+#define DW_IC_CLR_RD_REQ 0x50
+#define DW_IC_CLR_TX_ABRT 0x54
+#define DW_IC_CLR_RX_DONE 0x58
+#define DW_IC_CLR_ACTIVITY 0x5c
+#define DW_IC_CLR_STOP_DET 0x60
+#define DW_IC_CLR_START_DET 0x64
+#define DW_IC_CLR_GEN_CALL 0x68
#define DW_IC_ENABLE 0x6c
#define DW_IC_STATUS 0x70
#define DW_IC_TXFLR 0x74
@@ -64,9 +77,23 @@
#define DW_IC_CON_RESTART_EN 0x20
#define DW_IC_CON_SLAVE_DISABLE 0x40
-#define DW_IC_INTR_TX_EMPTY 0x10
-#define DW_IC_INTR_TX_ABRT 0x40
+#define DW_IC_INTR_RX_UNDER 0x001
+#define DW_IC_INTR_RX_OVER 0x002
+#define DW_IC_INTR_RX_FULL 0x004
+#define DW_IC_INTR_TX_OVER 0x008
+#define DW_IC_INTR_TX_EMPTY 0x010
+#define DW_IC_INTR_RD_REQ 0x020
+#define DW_IC_INTR_TX_ABRT 0x040
+#define DW_IC_INTR_RX_DONE 0x080
+#define DW_IC_INTR_ACTIVITY 0x100
#define DW_IC_INTR_STOP_DET 0x200
+#define DW_IC_INTR_START_DET 0x400
+#define DW_IC_INTR_GEN_CALL 0x800
+
+#define DW_IC_INTR_DEFAULT_MASK (DW_IC_INTR_RX_FULL | \
+ DW_IC_INTR_TX_EMPTY | \
+ DW_IC_INTR_TX_ABRT | \
+ DW_IC_INTR_STOP_DET)
#define DW_IC_STATUS_ACTIVITY 0x1
@@ -96,31 +123,49 @@
#define ABRT_SBYTE_ACKDET 7
#define ABRT_SBYTE_NORSTRT 9
#define ABRT_10B_RD_NORSTRT 10
-#define ARB_MASTER_DIS 11
+#define ABRT_MASTER_DIS 11
#define ARB_LOST 12
+#define DW_IC_TX_ABRT_7B_ADDR_NOACK (1UL << ABRT_7B_ADDR_NOACK)
+#define DW_IC_TX_ABRT_10ADDR1_NOACK (1UL << ABRT_10ADDR1_NOACK)
+#define DW_IC_TX_ABRT_10ADDR2_NOACK (1UL << ABRT_10ADDR2_NOACK)
+#define DW_IC_TX_ABRT_TXDATA_NOACK (1UL << ABRT_TXDATA_NOACK)
+#define DW_IC_TX_ABRT_GCALL_NOACK (1UL << ABRT_GCALL_NOACK)
+#define DW_IC_TX_ABRT_GCALL_READ (1UL << ABRT_GCALL_READ)
+#define DW_IC_TX_ABRT_SBYTE_ACKDET (1UL << ABRT_SBYTE_ACKDET)
+#define DW_IC_TX_ABRT_SBYTE_NORSTRT (1UL << ABRT_SBYTE_NORSTRT)
+#define DW_IC_TX_ABRT_10B_RD_NORSTRT (1UL << ABRT_10B_RD_NORSTRT)
+#define DW_IC_TX_ABRT_MASTER_DIS (1UL << ABRT_MASTER_DIS)
+#define DW_IC_TX_ARB_LOST (1UL << ARB_LOST)
+
+#define DW_IC_TX_ABRT_NOACK (DW_IC_TX_ABRT_7B_ADDR_NOACK | \
+ DW_IC_TX_ABRT_10ADDR1_NOACK | \
+ DW_IC_TX_ABRT_10ADDR2_NOACK | \
+ DW_IC_TX_ABRT_TXDATA_NOACK | \
+ DW_IC_TX_ABRT_GCALL_NOACK)
+
static char *abort_sources[] = {
- [ABRT_7B_ADDR_NOACK] =
+ [ABRT_7B_ADDR_NOACK] =
"slave address not acknowledged (7bit mode)",
- [ABRT_10ADDR1_NOACK] =
+ [ABRT_10ADDR1_NOACK] =
"first address byte not acknowledged (10bit mode)",
- [ABRT_10ADDR2_NOACK] =
+ [ABRT_10ADDR2_NOACK] =
"second address byte not acknowledged (10bit mode)",
- [ABRT_TXDATA_NOACK] =
+ [ABRT_TXDATA_NOACK] =
"data not acknowledged",
- [ABRT_GCALL_NOACK] =
+ [ABRT_GCALL_NOACK] =
"no acknowledgement for a general call",
- [ABRT_GCALL_READ] =
+ [ABRT_GCALL_READ] =
"read after general call",
- [ABRT_SBYTE_ACKDET] =
+ [ABRT_SBYTE_ACKDET] =
"start byte acknowledged",
- [ABRT_SBYTE_NORSTRT] =
+ [ABRT_SBYTE_NORSTRT] =
"trying to send start byte when restart is disabled",
- [ABRT_10B_RD_NORSTRT] =
+ [ABRT_10B_RD_NORSTRT] =
"trying to read when restart is disabled (10bit mode)",
- [ARB_MASTER_DIS] =
+ [ABRT_MASTER_DIS] =
"trying to use disabled adapter",
- [ARB_LOST] =
+ [ARB_LOST] =
"lost arbitration",
};
@@ -129,7 +174,6 @@
* @dev: driver model device node
* @base: IO registers pointer
* @cmd_complete: tx completion indicator
- * @pump_msg: continue in progress transfers
* @lock: protect this struct and IO registers
* @clk: input reference clock
* @cmd_err: run time hadware error code
@@ -155,27 +199,81 @@
struct device *dev;
void __iomem *base;
struct completion cmd_complete;
- struct tasklet_struct pump_msg;
struct mutex lock;
struct clk *clk;
int cmd_err;
struct i2c_msg *msgs;
int msgs_num;
int msg_write_idx;
- u16 tx_buf_len;
+ u32 tx_buf_len;
u8 *tx_buf;
int msg_read_idx;
- u16 rx_buf_len;
+ u32 rx_buf_len;
u8 *rx_buf;
int msg_err;
unsigned int status;
- u16 abort_source;
+ u32 abort_source;
int irq;
struct i2c_adapter adapter;
unsigned int tx_fifo_depth;
unsigned int rx_fifo_depth;
};
+static u32
+i2c_dw_scl_hcnt(u32 ic_clk, u32 tSYMBOL, u32 tf, int cond, int offset)
+{
+ /*
+ * DesignWare I2C core doesn't seem to have solid strategy to meet
+ * the tHD;STA timing spec. Configuring _HCNT based on tHIGH spec
+ * will result in violation of the tHD;STA spec.
+ */
+ if (cond)
+ /*
+ * Conditional expression:
+ *
+ * IC_[FS]S_SCL_HCNT + (1+4+3) >= IC_CLK * tHIGH
+ *
+ * This is based on the DW manuals, and represents an ideal
+ * configuration. The resulting I2C bus speed will be
+ * faster than any of the others.
+ *
+ * If your hardware is free from tHD;STA issue, try this one.
+ */
+ return (ic_clk * tSYMBOL + 5000) / 10000 - 8 + offset;
+ else
+ /*
+ * Conditional expression:
+ *
+ * IC_[FS]S_SCL_HCNT + 3 >= IC_CLK * (tHD;STA + tf)
+ *
+ * This is just experimental rule; the tHD;STA period turned
+ * out to be proportinal to (_HCNT + 3). With this setting,
+ * we could meet both tHIGH and tHD;STA timing specs.
+ *
+ * If unsure, you'd better to take this alternative.
+ *
+ * The reason why we need to take into account "tf" here,
+ * is the same as described in i2c_dw_scl_lcnt().
+ */
+ return (ic_clk * (tSYMBOL + tf) + 5000) / 10000 - 3 + offset;
+}
+
+static u32 i2c_dw_scl_lcnt(u32 ic_clk, u32 tLOW, u32 tf, int offset)
+{
+ /*
+ * Conditional expression:
+ *
+ * IC_[FS]S_SCL_LCNT + 1 >= IC_CLK * (tLOW + tf)
+ *
+ * DW I2C core starts counting the SCL CNTs for the LOW period
+ * of the SCL clock (tLOW) as soon as it pulls the SCL line.
+ * In order to meet the tLOW timing spec, we need to take into
+ * account the fall time of SCL signal (tf). Default tf value
+ * should be 0.3 us, for safety.
+ */
+ return ((ic_clk * (tLOW + tf) + 5000) / 10000) - 1 + offset;
+}
+
/**
* i2c_dw_init() - initialize the designware i2c master hardware
* @dev: device private data
@@ -187,25 +285,49 @@
static void i2c_dw_init(struct dw_i2c_dev *dev)
{
u32 input_clock_khz = clk_get_rate(dev->clk) / 1000;
- u16 ic_con;
+ u32 ic_con, hcnt, lcnt;
/* Disable the adapter */
- writeb(0, dev->base + DW_IC_ENABLE);
+ writel(0, dev->base + DW_IC_ENABLE);
/* set standard and fast speed deviders for high/low periods */
- writew((input_clock_khz * 40 / 10000)+1, /* std speed high, 4us */
- dev->base + DW_IC_SS_SCL_HCNT);
- writew((input_clock_khz * 47 / 10000)+1, /* std speed low, 4.7us */
- dev->base + DW_IC_SS_SCL_LCNT);
- writew((input_clock_khz * 6 / 10000)+1, /* fast speed high, 0.6us */
- dev->base + DW_IC_FS_SCL_HCNT);
- writew((input_clock_khz * 13 / 10000)+1, /* fast speed low, 1.3us */
- dev->base + DW_IC_FS_SCL_LCNT);
+
+ /* Standard-mode */
+ hcnt = i2c_dw_scl_hcnt(input_clock_khz,
+ 40, /* tHD;STA = tHIGH = 4.0 us */
+ 3, /* tf = 0.3 us */
+ 0, /* 0: DW default, 1: Ideal */
+ 0); /* No offset */
+ lcnt = i2c_dw_scl_lcnt(input_clock_khz,
+ 47, /* tLOW = 4.7 us */
+ 3, /* tf = 0.3 us */
+ 0); /* No offset */
+ writel(hcnt, dev->base + DW_IC_SS_SCL_HCNT);
+ writel(lcnt, dev->base + DW_IC_SS_SCL_LCNT);
+ dev_dbg(dev->dev, "Standard-mode HCNT:LCNT = %d:%d\n", hcnt, lcnt);
+
+ /* Fast-mode */
+ hcnt = i2c_dw_scl_hcnt(input_clock_khz,
+ 6, /* tHD;STA = tHIGH = 0.6 us */
+ 3, /* tf = 0.3 us */
+ 0, /* 0: DW default, 1: Ideal */
+ 0); /* No offset */
+ lcnt = i2c_dw_scl_lcnt(input_clock_khz,
+ 13, /* tLOW = 1.3 us */
+ 3, /* tf = 0.3 us */
+ 0); /* No offset */
+ writel(hcnt, dev->base + DW_IC_FS_SCL_HCNT);
+ writel(lcnt, dev->base + DW_IC_FS_SCL_LCNT);
+ dev_dbg(dev->dev, "Fast-mode HCNT:LCNT = %d:%d\n", hcnt, lcnt);
+
+ /* Configure Tx/Rx FIFO threshold levels */
+ writel(dev->tx_fifo_depth - 1, dev->base + DW_IC_TX_TL);
+ writel(0, dev->base + DW_IC_RX_TL);
/* configure the i2c master */
ic_con = DW_IC_CON_MASTER | DW_IC_CON_SLAVE_DISABLE |
DW_IC_CON_RESTART_EN | DW_IC_CON_SPEED_FAST;
- writew(ic_con, dev->base + DW_IC_CON);
+ writel(ic_con, dev->base + DW_IC_CON);
}
/*
@@ -215,7 +337,7 @@
{
int timeout = TIMEOUT;
- while (readb(dev->base + DW_IC_STATUS) & DW_IC_STATUS_ACTIVITY) {
+ while (readl(dev->base + DW_IC_STATUS) & DW_IC_STATUS_ACTIVITY) {
if (timeout <= 0) {
dev_warn(dev->dev, "timeout waiting for bus ready\n");
return -ETIMEDOUT;
@@ -227,106 +349,125 @@
return 0;
}
+static void i2c_dw_xfer_init(struct dw_i2c_dev *dev)
+{
+ struct i2c_msg *msgs = dev->msgs;
+ u32 ic_con;
+
+ /* Disable the adapter */
+ writel(0, dev->base + DW_IC_ENABLE);
+
+ /* set the slave (target) address */
+ writel(msgs[dev->msg_write_idx].addr, dev->base + DW_IC_TAR);
+
+ /* if the slave address is ten bit address, enable 10BITADDR */
+ ic_con = readl(dev->base + DW_IC_CON);
+ if (msgs[dev->msg_write_idx].flags & I2C_M_TEN)
+ ic_con |= DW_IC_CON_10BITADDR_MASTER;
+ else
+ ic_con &= ~DW_IC_CON_10BITADDR_MASTER;
+ writel(ic_con, dev->base + DW_IC_CON);
+
+ /* Enable the adapter */
+ writel(1, dev->base + DW_IC_ENABLE);
+
+ /* Enable interrupts */
+ writel(DW_IC_INTR_DEFAULT_MASK, dev->base + DW_IC_INTR_MASK);
+}
+
/*
- * Initiate low level master read/write transaction.
- * This function is called from i2c_dw_xfer when starting a transfer.
- * This function is also called from dw_i2c_pump_msg to continue a transfer
- * that is longer than the size of the TX FIFO.
+ * Initiate (and continue) low level master read/write transaction.
+ * This function is only called from i2c_dw_isr, and pumping i2c_msg
+ * messages into the tx buffer. Even if the size of i2c_msg data is
+ * longer than the size of the tx buffer, it handles everything.
*/
static void
-i2c_dw_xfer_msg(struct i2c_adapter *adap)
+i2c_dw_xfer_msg(struct dw_i2c_dev *dev)
{
- struct dw_i2c_dev *dev = i2c_get_adapdata(adap);
struct i2c_msg *msgs = dev->msgs;
- int num = dev->msgs_num;
- u16 ic_con, intr_mask;
- int tx_limit = dev->tx_fifo_depth - readb(dev->base + DW_IC_TXFLR);
- int rx_limit = dev->rx_fifo_depth - readb(dev->base + DW_IC_RXFLR);
- u16 addr = msgs[dev->msg_write_idx].addr;
- u16 buf_len = dev->tx_buf_len;
+ u32 intr_mask;
+ int tx_limit, rx_limit;
+ u32 addr = msgs[dev->msg_write_idx].addr;
+ u32 buf_len = dev->tx_buf_len;
+ u8 *buf = dev->tx_buf;;
- if (!(dev->status & STATUS_WRITE_IN_PROGRESS)) {
- /* Disable the adapter */
- writeb(0, dev->base + DW_IC_ENABLE);
+ intr_mask = DW_IC_INTR_DEFAULT_MASK;
- /* set the slave (target) address */
- writew(msgs[dev->msg_write_idx].addr, dev->base + DW_IC_TAR);
-
- /* if the slave address is ten bit address, enable 10BITADDR */
- ic_con = readw(dev->base + DW_IC_CON);
- if (msgs[dev->msg_write_idx].flags & I2C_M_TEN)
- ic_con |= DW_IC_CON_10BITADDR_MASTER;
- else
- ic_con &= ~DW_IC_CON_10BITADDR_MASTER;
- writew(ic_con, dev->base + DW_IC_CON);
-
- /* Enable the adapter */
- writeb(1, dev->base + DW_IC_ENABLE);
- }
-
- for (; dev->msg_write_idx < num; dev->msg_write_idx++) {
- /* if target address has changed, we need to
+ for (; dev->msg_write_idx < dev->msgs_num; dev->msg_write_idx++) {
+ /*
+ * if target address has changed, we need to
* reprogram the target address in the i2c
* adapter when we are done with this transfer
*/
- if (msgs[dev->msg_write_idx].addr != addr)
- return;
+ if (msgs[dev->msg_write_idx].addr != addr) {
+ dev_err(dev->dev,
+ "%s: invalid target address\n", __func__);
+ dev->msg_err = -EINVAL;
+ break;
+ }
if (msgs[dev->msg_write_idx].len == 0) {
dev_err(dev->dev,
"%s: invalid message length\n", __func__);
dev->msg_err = -EINVAL;
- return;
+ break;
}
if (!(dev->status & STATUS_WRITE_IN_PROGRESS)) {
/* new i2c_msg */
- dev->tx_buf = msgs[dev->msg_write_idx].buf;
+ buf = msgs[dev->msg_write_idx].buf;
buf_len = msgs[dev->msg_write_idx].len;
}
+ tx_limit = dev->tx_fifo_depth - readl(dev->base + DW_IC_TXFLR);
+ rx_limit = dev->rx_fifo_depth - readl(dev->base + DW_IC_RXFLR);
+
while (buf_len > 0 && tx_limit > 0 && rx_limit > 0) {
if (msgs[dev->msg_write_idx].flags & I2C_M_RD) {
- writew(0x100, dev->base + DW_IC_DATA_CMD);
+ writel(0x100, dev->base + DW_IC_DATA_CMD);
rx_limit--;
} else
- writew(*(dev->tx_buf++),
- dev->base + DW_IC_DATA_CMD);
+ writel(*buf++, dev->base + DW_IC_DATA_CMD);
tx_limit--; buf_len--;
}
+
+ dev->tx_buf = buf;
+ dev->tx_buf_len = buf_len;
+
+ if (buf_len > 0) {
+ /* more bytes to be written */
+ dev->status |= STATUS_WRITE_IN_PROGRESS;
+ break;
+ } else
+ dev->status &= ~STATUS_WRITE_IN_PROGRESS;
}
- intr_mask = DW_IC_INTR_STOP_DET | DW_IC_INTR_TX_ABRT;
- if (buf_len > 0) { /* more bytes to be written */
- intr_mask |= DW_IC_INTR_TX_EMPTY;
- dev->status |= STATUS_WRITE_IN_PROGRESS;
- } else
- dev->status &= ~STATUS_WRITE_IN_PROGRESS;
- writew(intr_mask, dev->base + DW_IC_INTR_MASK);
+ /*
+ * If i2c_msg index search is completed, we don't need TX_EMPTY
+ * interrupt any more.
+ */
+ if (dev->msg_write_idx == dev->msgs_num)
+ intr_mask &= ~DW_IC_INTR_TX_EMPTY;
- dev->tx_buf_len = buf_len;
+ if (dev->msg_err)
+ intr_mask = 0;
+
+ writel(intr_mask, dev->base + DW_IC_INTR_MASK);
}
static void
-i2c_dw_read(struct i2c_adapter *adap)
+i2c_dw_read(struct dw_i2c_dev *dev)
{
- struct dw_i2c_dev *dev = i2c_get_adapdata(adap);
struct i2c_msg *msgs = dev->msgs;
- int num = dev->msgs_num;
- u16 addr = msgs[dev->msg_read_idx].addr;
- int rx_valid = readw(dev->base + DW_IC_RXFLR);
+ int rx_valid;
- for (; dev->msg_read_idx < num; dev->msg_read_idx++) {
- u16 len;
+ for (; dev->msg_read_idx < dev->msgs_num; dev->msg_read_idx++) {
+ u32 len;
u8 *buf;
if (!(msgs[dev->msg_read_idx].flags & I2C_M_RD))
continue;
- /* different i2c client, reprogram the i2c adapter */
- if (msgs[dev->msg_read_idx].addr != addr)
- return;
-
if (!(dev->status & STATUS_READ_IN_PROGRESS)) {
len = msgs[dev->msg_read_idx].len;
buf = msgs[dev->msg_read_idx].buf;
@@ -335,8 +476,10 @@
buf = dev->rx_buf;
}
+ rx_valid = readl(dev->base + DW_IC_RXFLR);
+
for (; len > 0 && rx_valid > 0; len--, rx_valid--)
- *buf++ = readb(dev->base + DW_IC_DATA_CMD);
+ *buf++ = readl(dev->base + DW_IC_DATA_CMD);
if (len > 0) {
dev->status |= STATUS_READ_IN_PROGRESS;
@@ -348,6 +491,29 @@
}
}
+static int i2c_dw_handle_tx_abort(struct dw_i2c_dev *dev)
+{
+ unsigned long abort_source = dev->abort_source;
+ int i;
+
+ if (abort_source & DW_IC_TX_ABRT_NOACK) {
+ for_each_bit(i, &abort_source, ARRAY_SIZE(abort_sources))
+ dev_dbg(dev->dev,
+ "%s: %s\n", __func__, abort_sources[i]);
+ return -EREMOTEIO;
+ }
+
+ for_each_bit(i, &abort_source, ARRAY_SIZE(abort_sources))
+ dev_err(dev->dev, "%s: %s\n", __func__, abort_sources[i]);
+
+ if (abort_source & DW_IC_TX_ARB_LOST)
+ return -EAGAIN;
+ else if (abort_source & DW_IC_TX_ABRT_GCALL_READ)
+ return -EINVAL; /* wrong msgs[] data */
+ else
+ return -EIO;
+}
+
/*
* Prepare controller for a transaction and call i2c_dw_xfer_msg
*/
@@ -369,13 +535,14 @@
dev->msg_read_idx = 0;
dev->msg_err = 0;
dev->status = STATUS_IDLE;
+ dev->abort_source = 0;
ret = i2c_dw_wait_bus_not_busy(dev);
if (ret < 0)
goto done;
/* start the transfers */
- i2c_dw_xfer_msg(adap);
+ i2c_dw_xfer_init(dev);
/* wait for tx to complete */
ret = wait_for_completion_interruptible_timeout(&dev->cmd_complete, HZ);
@@ -394,23 +561,16 @@
/* no error */
if (likely(!dev->cmd_err)) {
- /* read rx fifo, and disable the adapter */
- do {
- i2c_dw_read(adap);
- } while (dev->status & STATUS_READ_IN_PROGRESS);
- writeb(0, dev->base + DW_IC_ENABLE);
+ /* Disable the adapter */
+ writel(0, dev->base + DW_IC_ENABLE);
ret = num;
goto done;
}
/* We have an error */
if (dev->cmd_err == DW_IC_ERR_TX_ABRT) {
- unsigned long abort_source = dev->abort_source;
- int i;
-
- for_each_bit(i, &abort_source, ARRAY_SIZE(abort_sources)) {
- dev_err(dev->dev, "%s: %s\n", __func__, abort_sources[i]);
- }
+ ret = i2c_dw_handle_tx_abort(dev);
+ goto done;
}
ret = -EIO;
@@ -422,21 +582,67 @@
static u32 i2c_dw_func(struct i2c_adapter *adap)
{
- return I2C_FUNC_I2C | I2C_FUNC_10BIT_ADDR;
+ return I2C_FUNC_I2C |
+ I2C_FUNC_10BIT_ADDR |
+ I2C_FUNC_SMBUS_BYTE |
+ I2C_FUNC_SMBUS_BYTE_DATA |
+ I2C_FUNC_SMBUS_WORD_DATA |
+ I2C_FUNC_SMBUS_I2C_BLOCK;
}
-static void dw_i2c_pump_msg(unsigned long data)
+static u32 i2c_dw_read_clear_intrbits(struct dw_i2c_dev *dev)
{
- struct dw_i2c_dev *dev = (struct dw_i2c_dev *) data;
- u16 intr_mask;
+ u32 stat;
- i2c_dw_read(&dev->adapter);
- i2c_dw_xfer_msg(&dev->adapter);
+ /*
+ * The IC_INTR_STAT register just indicates "enabled" interrupts.
+ * Ths unmasked raw version of interrupt status bits are available
+ * in the IC_RAW_INTR_STAT register.
+ *
+ * That is,
+ * stat = readl(IC_INTR_STAT);
+ * equals to,
+ * stat = readl(IC_RAW_INTR_STAT) & readl(IC_INTR_MASK);
+ *
+ * The raw version might be useful for debugging purposes.
+ */
+ stat = readl(dev->base + DW_IC_INTR_STAT);
- intr_mask = DW_IC_INTR_STOP_DET | DW_IC_INTR_TX_ABRT;
- if (dev->status & STATUS_WRITE_IN_PROGRESS)
- intr_mask |= DW_IC_INTR_TX_EMPTY;
- writew(intr_mask, dev->base + DW_IC_INTR_MASK);
+ /*
+ * Do not use the IC_CLR_INTR register to clear interrupts, or
+ * you'll miss some interrupts, triggered during the period from
+ * readl(IC_INTR_STAT) to readl(IC_CLR_INTR).
+ *
+ * Instead, use the separately-prepared IC_CLR_* registers.
+ */
+ if (stat & DW_IC_INTR_RX_UNDER)
+ readl(dev->base + DW_IC_CLR_RX_UNDER);
+ if (stat & DW_IC_INTR_RX_OVER)
+ readl(dev->base + DW_IC_CLR_RX_OVER);
+ if (stat & DW_IC_INTR_TX_OVER)
+ readl(dev->base + DW_IC_CLR_TX_OVER);
+ if (stat & DW_IC_INTR_RD_REQ)
+ readl(dev->base + DW_IC_CLR_RD_REQ);
+ if (stat & DW_IC_INTR_TX_ABRT) {
+ /*
+ * The IC_TX_ABRT_SOURCE register is cleared whenever
+ * the IC_CLR_TX_ABRT is read. Preserve it beforehand.
+ */
+ dev->abort_source = readl(dev->base + DW_IC_TX_ABRT_SOURCE);
+ readl(dev->base + DW_IC_CLR_TX_ABRT);
+ }
+ if (stat & DW_IC_INTR_RX_DONE)
+ readl(dev->base + DW_IC_CLR_RX_DONE);
+ if (stat & DW_IC_INTR_ACTIVITY)
+ readl(dev->base + DW_IC_CLR_ACTIVITY);
+ if (stat & DW_IC_INTR_STOP_DET)
+ readl(dev->base + DW_IC_CLR_STOP_DET);
+ if (stat & DW_IC_INTR_START_DET)
+ readl(dev->base + DW_IC_CLR_START_DET);
+ if (stat & DW_IC_INTR_GEN_CALL)
+ readl(dev->base + DW_IC_CLR_GEN_CALL);
+
+ return stat;
}
/*
@@ -446,20 +652,37 @@
static irqreturn_t i2c_dw_isr(int this_irq, void *dev_id)
{
struct dw_i2c_dev *dev = dev_id;
- u16 stat;
+ u32 stat;
- stat = readw(dev->base + DW_IC_INTR_STAT);
+ stat = i2c_dw_read_clear_intrbits(dev);
dev_dbg(dev->dev, "%s: stat=0x%x\n", __func__, stat);
+
if (stat & DW_IC_INTR_TX_ABRT) {
- dev->abort_source = readw(dev->base + DW_IC_TX_ABRT_SOURCE);
dev->cmd_err |= DW_IC_ERR_TX_ABRT;
dev->status = STATUS_IDLE;
- } else if (stat & DW_IC_INTR_TX_EMPTY)
- tasklet_schedule(&dev->pump_msg);
- readb(dev->base + DW_IC_CLR_INTR); /* clear interrupts */
- writew(0, dev->base + DW_IC_INTR_MASK); /* disable interrupts */
- if (stat & (DW_IC_INTR_TX_ABRT | DW_IC_INTR_STOP_DET))
+ /*
+ * Anytime TX_ABRT is set, the contents of the tx/rx
+ * buffers are flushed. Make sure to skip them.
+ */
+ writel(0, dev->base + DW_IC_INTR_MASK);
+ goto tx_aborted;
+ }
+
+ if (stat & DW_IC_INTR_RX_FULL)
+ i2c_dw_read(dev);
+
+ if (stat & DW_IC_INTR_TX_EMPTY)
+ i2c_dw_xfer_msg(dev);
+
+ /*
+ * No need to modify or disable the interrupt mask here.
+ * i2c_dw_xfer_msg() will take care of it according to
+ * the current transmit status.
+ */
+
+tx_aborted:
+ if ((stat & (DW_IC_INTR_TX_ABRT | DW_IC_INTR_STOP_DET)) || dev->msg_err)
complete(&dev->cmd_complete);
return IRQ_HANDLED;
@@ -474,8 +697,8 @@
{
struct dw_i2c_dev *dev;
struct i2c_adapter *adap;
- struct resource *mem, *irq, *ioarea;
- int r;
+ struct resource *mem, *ioarea;
+ int irq, r;
/* NOTE: driver uses the static register mapping */
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -484,10 +707,10 @@
return -EINVAL;
}
- irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
- if (!irq) {
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
dev_err(&pdev->dev, "no irq resource?\n");
- return -EINVAL;
+ return irq; /* -ENXIO */
}
ioarea = request_mem_region(mem->start, resource_size(mem),
@@ -504,10 +727,9 @@
}
init_completion(&dev->cmd_complete);
- tasklet_init(&dev->pump_msg, dw_i2c_pump_msg, (unsigned long) dev);
mutex_init(&dev->lock);
dev->dev = get_device(&pdev->dev);
- dev->irq = irq->start;
+ dev->irq = irq;
platform_set_drvdata(pdev, dev);
dev->clk = clk_get(&pdev->dev, NULL);
@@ -531,8 +753,8 @@
}
i2c_dw_init(dev);
- writew(0, dev->base + DW_IC_INTR_MASK); /* disable IRQ */
- r = request_irq(dev->irq, i2c_dw_isr, 0, pdev->name, dev);
+ writel(0, dev->base + DW_IC_INTR_MASK); /* disable IRQ */
+ r = request_irq(dev->irq, i2c_dw_isr, IRQF_DISABLED, pdev->name, dev);
if (r) {
dev_err(&pdev->dev, "failure requesting irq %i\n", dev->irq);
goto err_iounmap;
@@ -587,7 +809,7 @@
clk_put(dev->clk);
dev->clk = NULL;
- writeb(0, dev->base + DW_IC_ENABLE);
+ writel(0, dev->base + DW_IC_ENABLE);
free_irq(dev->irq, dev);
kfree(dev);
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 827da08..75bf3ad 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -178,6 +178,12 @@
unsigned b_hw:1; /* bad h/w fixes */
unsigned idle:1;
u16 iestate; /* Saved interrupt register */
+ u16 pscstate;
+ u16 scllstate;
+ u16 sclhstate;
+ u16 bufstate;
+ u16 syscstate;
+ u16 westate;
};
static inline void omap_i2c_write_reg(struct omap_i2c_dev *i2c_dev,
@@ -230,9 +236,18 @@
clk_enable(dev->iclk);
clk_enable(dev->fclk);
+ if (cpu_is_omap34xx()) {
+ omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
+ omap_i2c_write_reg(dev, OMAP_I2C_PSC_REG, dev->pscstate);
+ omap_i2c_write_reg(dev, OMAP_I2C_SCLL_REG, dev->scllstate);
+ omap_i2c_write_reg(dev, OMAP_I2C_SCLH_REG, dev->sclhstate);
+ omap_i2c_write_reg(dev, OMAP_I2C_BUF_REG, dev->bufstate);
+ omap_i2c_write_reg(dev, OMAP_I2C_SYSC_REG, dev->syscstate);
+ omap_i2c_write_reg(dev, OMAP_I2C_WE_REG, dev->westate);
+ omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN);
+ }
dev->idle = 0;
- if (dev->iestate)
- omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, dev->iestate);
+ omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, dev->iestate);
}
static void omap_i2c_idle(struct omap_i2c_dev *dev)
@@ -258,7 +273,7 @@
static int omap_i2c_init(struct omap_i2c_dev *dev)
{
- u16 psc = 0, scll = 0, sclh = 0;
+ u16 psc = 0, scll = 0, sclh = 0, buf = 0;
u16 fsscll = 0, fssclh = 0, hsscll = 0, hssclh = 0;
unsigned long fclk_rate = 12000000;
unsigned long timeout;
@@ -287,24 +302,22 @@
SYSC_AUTOIDLE_MASK);
} else if (dev->rev >= OMAP_I2C_REV_ON_3430) {
- u32 v;
-
- v = SYSC_AUTOIDLE_MASK;
- v |= SYSC_ENAWAKEUP_MASK;
- v |= (SYSC_IDLEMODE_SMART <<
+ dev->syscstate = SYSC_AUTOIDLE_MASK;
+ dev->syscstate |= SYSC_ENAWAKEUP_MASK;
+ dev->syscstate |= (SYSC_IDLEMODE_SMART <<
__ffs(SYSC_SIDLEMODE_MASK));
- v |= (SYSC_CLOCKACTIVITY_FCLK <<
+ dev->syscstate |= (SYSC_CLOCKACTIVITY_FCLK <<
__ffs(SYSC_CLOCKACTIVITY_MASK));
- omap_i2c_write_reg(dev, OMAP_I2C_SYSC_REG, v);
+ omap_i2c_write_reg(dev, OMAP_I2C_SYSC_REG,
+ dev->syscstate);
/*
* Enabling all wakup sources to stop I2C freezing on
* WFI instruction.
* REVISIT: Some wkup sources might not be needed.
*/
- omap_i2c_write_reg(dev, OMAP_I2C_WE_REG,
- OMAP_I2C_WE_ALL);
-
+ dev->westate = OMAP_I2C_WE_ALL;
+ omap_i2c_write_reg(dev, OMAP_I2C_WE_REG, dev->westate);
}
}
omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
@@ -394,23 +407,28 @@
omap_i2c_write_reg(dev, OMAP_I2C_SCLL_REG, scll);
omap_i2c_write_reg(dev, OMAP_I2C_SCLH_REG, sclh);
- if (dev->fifo_size)
- /* Note: setup required fifo size - 1 */
- omap_i2c_write_reg(dev, OMAP_I2C_BUF_REG,
- (dev->fifo_size - 1) << 8 | /* RTRSH */
- OMAP_I2C_BUF_RXFIF_CLR |
- (dev->fifo_size - 1) | /* XTRSH */
- OMAP_I2C_BUF_TXFIF_CLR);
+ if (dev->fifo_size) {
+ /* Note: setup required fifo size - 1. RTRSH and XTRSH */
+ buf = (dev->fifo_size - 1) << 8 | OMAP_I2C_BUF_RXFIF_CLR |
+ (dev->fifo_size - 1) | OMAP_I2C_BUF_TXFIF_CLR;
+ omap_i2c_write_reg(dev, OMAP_I2C_BUF_REG, buf);
+ }
/* Take the I2C module out of reset: */
omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN);
/* Enable interrupts */
- omap_i2c_write_reg(dev, OMAP_I2C_IE_REG,
- (OMAP_I2C_IE_XRDY | OMAP_I2C_IE_RRDY |
+ dev->iestate = (OMAP_I2C_IE_XRDY | OMAP_I2C_IE_RRDY |
OMAP_I2C_IE_ARDY | OMAP_I2C_IE_NACK |
OMAP_I2C_IE_AL) | ((dev->fifo_size) ?
- (OMAP_I2C_IE_RDR | OMAP_I2C_IE_XDR) : 0));
+ (OMAP_I2C_IE_RDR | OMAP_I2C_IE_XDR) : 0);
+ omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, dev->iestate);
+ if (cpu_is_omap34xx()) {
+ dev->pscstate = psc;
+ dev->scllstate = scll;
+ dev->sclhstate = sclh;
+ dev->bufstate = buf;
+ }
return 0;
}
diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c
index fbab684..5d1c260 100644
--- a/drivers/i2c/busses/i2c-pnx.c
+++ b/drivers/i2c/busses/i2c-pnx.c
@@ -638,7 +638,8 @@
/* Register this adapter with the I2C subsystem */
i2c_pnx->adapter->dev.parent = &pdev->dev;
- ret = i2c_add_adapter(i2c_pnx->adapter);
+ i2c_pnx->adapter->nr = pdev->id;
+ ret = i2c_add_numbered_adapter(i2c_pnx->adapter);
if (ret < 0) {
dev_err(&pdev->dev, "I2C: Failed to add bus\n");
goto out_irq;
diff --git a/drivers/i2c/busses/i2c-scmi.c b/drivers/i2c/busses/i2c-scmi.c
index b4a55d4..365e0be 100644
--- a/drivers/i2c/busses/i2c-scmi.c
+++ b/drivers/i2c/busses/i2c-scmi.c
@@ -363,7 +363,7 @@
smbus_cmi->cap_write = 0;
acpi_walk_namespace(ACPI_TYPE_METHOD, smbus_cmi->handle, 1,
- acpi_smbus_cmi_query_methods, smbus_cmi, NULL);
+ acpi_smbus_cmi_query_methods, NULL, smbus_cmi, NULL);
if (smbus_cmi->cap_info == 0)
goto err;
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index 9a5d0aa..98ccfeb 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -7,50 +7,25 @@
bool
menuconfig IDE
- tristate "ATA/ATAPI/MFM/RLL support"
+ tristate "ATA/ATAPI/MFM/RLL support (DEPRECATED)"
depends on HAVE_IDE
depends on BLOCK
---help---
- If you say Y here, your kernel will be able to manage low cost mass
- storage units such as ATA/(E)IDE and ATAPI units. The most common
- cases are IDE hard drives and ATAPI CD-ROM drives.
+ If you say Y here, your kernel will be able to manage ATA/(E)IDE and
+ ATAPI units. The most common cases are IDE hard drives and ATAPI
+ CD-ROM drives.
- If your system is pure SCSI and doesn't use these interfaces, you
- can say N here.
-
- Integrated Disk Electronics (IDE aka ATA-1) is a connecting standard
- for mass storage units such as hard disks. It was designed by
- Western Digital and Compaq Computer in 1984. It was then named
- ST506. Quite a number of disks use the IDE interface.
-
- AT Attachment (ATA) is the superset of the IDE specifications.
- ST506 was also called ATA-1.
-
- Fast-IDE is ATA-2 (also named Fast ATA), Enhanced IDE (EIDE) is
- ATA-3. It provides support for larger disks (up to 8.4GB by means of
- the LBA standard), more disks (4 instead of 2) and for other mass
- storage units such as tapes and cdrom. UDMA/33 (aka UltraDMA/33) is
- ATA-4 and provides faster (and more CPU friendly) transfer modes
- than previous PIO (Programmed processor Input/Output) from previous
- ATA/IDE standards by means of fast DMA controllers.
-
- ATA Packet Interface (ATAPI) is a protocol used by EIDE tape and
- CD-ROM drives, similar in many respects to the SCSI protocol.
-
- SMART IDE (Self Monitoring, Analysis and Reporting Technology) was
- designed in order to prevent data corruption and disk crash by
- detecting pre hardware failure conditions (heat, access time, and
- the like...). Disks built since June 1995 may follow this standard.
- The kernel itself doesn't manage this; however there are quite a
- number of user programs such as smart that can query the status of
- SMART parameters from disk drives.
+ This subsystem is currently in maintenance mode with only bug fix
+ changes applied. Users of ATA hardware are encouraged to migrate to
+ the newer ATA subsystem ("Serial ATA (prod) and Parallel ATA
+ (experimental) drivers") which is more actively maintained.
To compile this driver as a module, choose M here: the
module will be called ide-core.
For further information, please read <file:Documentation/ide/ide.txt>.
- If unsure, say Y.
+ If unsure, say N.
if IDE
diff --git a/drivers/ide/alim15x3.c b/drivers/ide/alim15x3.c
index e59b6de..0abc43f 100644
--- a/drivers/ide/alim15x3.c
+++ b/drivers/ide/alim15x3.c
@@ -40,16 +40,6 @@
#define DRV_NAME "alim15x3"
/*
- * Allow UDMA on M1543C-E chipset for WDC disks that ignore CRC checking
- * (this is DANGEROUS and could result in data corruption).
- */
-static int wdc_udma;
-
-module_param(wdc_udma, bool, 0);
-MODULE_PARM_DESC(wdc_udma,
- "allow UDMA on M1543C-E chipset for WDC disks (DANGEROUS)");
-
-/*
* ALi devices are not plug in. Otherwise these static values would
* need to go. They ought to go away anyway
*/
@@ -132,7 +122,7 @@
if (m5229_revision > 0x20 && m5229_revision < 0xC2) {
if (drive->media != ide_disk)
return 0;
- if (wdc_udma == 0 && chip_is_1543c_e &&
+ if (chip_is_1543c_e &&
strstr((char *)&drive->id[ATA_ID_PROD], "WDC "))
return 0;
}
diff --git a/drivers/ide/au1xxx-ide.c b/drivers/ide/au1xxx-ide.c
index 58121bd..87cef0c 100644
--- a/drivers/ide/au1xxx-ide.c
+++ b/drivers/ide/au1xxx-ide.c
@@ -532,14 +532,13 @@
goto out;
}
- if (!request_mem_region(res->start, res->end - res->start + 1,
- dev->name)) {
+ if (!request_mem_region(res->start, resource_size(res), dev->name)) {
pr_debug("%s: request_mem_region failed\n", DRV_NAME);
ret = -EBUSY;
goto out;
}
- ahwif->regbase = (u32)ioremap(res->start, res->end - res->start + 1);
+ ahwif->regbase = (u32)ioremap(res->start, resource_size(res));
if (ahwif->regbase == 0) {
ret = -ENOMEM;
goto out;
@@ -575,7 +574,7 @@
iounmap((void *)ahwif->regbase);
res = platform_get_resource(dev, IORESOURCE_MEM, 0);
- release_mem_region(res->start, res->end - res->start + 1);
+ release_mem_region(res->start, resource_size(res));
return 0;
}
diff --git a/drivers/ide/cmd64x.c b/drivers/ide/cmd64x.c
index ca0c46f..f2500c8 100644
--- a/drivers/ide/cmd64x.c
+++ b/drivers/ide/cmd64x.c
@@ -20,14 +20,6 @@
#define DRV_NAME "cmd64x"
-#define CMD_DEBUG 0
-
-#if CMD_DEBUG
-#define cmdprintk(x...) printk(x)
-#else
-#define cmdprintk(x...)
-#endif
-
/*
* CMD64x specific registers definition.
*/
@@ -76,9 +68,6 @@
{15, 15, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 0};
static const u8 drwtim_regs[4] = {DRWTIM0, DRWTIM1, DRWTIM2, DRWTIM3};
- cmdprintk("program_cycle_times parameters: total=%d, active=%d\n",
- cycle_time, active_time);
-
cycle_count = quantize_timing( cycle_time, clock_time);
active_count = quantize_timing(active_time, clock_time);
recovery_count = cycle_count - active_count;
@@ -94,9 +83,6 @@
if (active_count > 16) /* shouldn't actually happen... */
active_count = 16;
- cmdprintk("Final counts: total=%d, active=%d, recovery=%d\n",
- cycle_count, active_count, recovery_count);
-
/*
* Convert values to internal chipset representation
*/
@@ -106,7 +92,6 @@
/* Program the active/recovery counts into the DRWTIM register */
drwtim = (active_count << 4) | recovery_count;
(void) pci_write_config_byte(dev, drwtim_regs[drive->dn], drwtim);
- cmdprintk("Write 0x%02x to reg 0x%x\n", drwtim, drwtim_regs[drive->dn]);
}
/*
@@ -150,7 +135,6 @@
if (setup_count > 5) /* shouldn't actually happen... */
setup_count = 5;
- cmdprintk("Final address setup count: %d\n", setup_count);
/*
* Program the address setup clocks into the ARTTIM registers.
@@ -162,7 +146,6 @@
arttim &= ~0xc0;
arttim |= setup_values[setup_count];
(void) pci_write_config_byte(dev, arttim_regs[drive->dn], arttim);
- cmdprintk("Write 0x%02x to reg 0x%x\n", arttim, arttim_regs[drive->dn]);
}
/*
diff --git a/drivers/ide/cs5535.c b/drivers/ide/cs5535.c
index 983d957..b883838 100644
--- a/drivers/ide/cs5535.c
+++ b/drivers/ide/cs5535.c
@@ -187,6 +187,7 @@
static const struct pci_device_id cs5535_pci_tbl[] = {
{ PCI_VDEVICE(NS, PCI_DEVICE_ID_NS_CS5535_IDE), 0 },
+ { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_CS5535_IDE), },
{ 0, },
};
diff --git a/drivers/ide/cy82c693.c b/drivers/ide/cy82c693.c
index 74fc540..d6e2cbb 100644
--- a/drivers/ide/cy82c693.c
+++ b/drivers/ide/cy82c693.c
@@ -51,11 +51,6 @@
#define DRV_NAME "cy82c693"
/*
- * The following are used to debug the driver.
- */
-#define CY82C693_DEBUG_INFO 0
-
-/*
* NOTE: the value for busmaster timeout is tricky and I got it by
* trial and error! By using a to low value will cause DMA timeouts
* and drop IDE performance, and by using a to high value will cause
@@ -176,11 +171,6 @@
outb(index, CY82_INDEX_PORT);
outb(data, CY82_DATA_PORT);
-#if CY82C693_DEBUG_INFO
- printk(KERN_INFO "%s (ch=%d, dev=%d): set DMA mode to %d (single=%d)\n",
- drive->name, hwif->channel, drive->dn & 1, mode & 3, single);
-#endif /* CY82C693_DEBUG_INFO */
-
/*
* note: below we set the value for Bus Master IDE TimeOut Register
* I'm not absolutly sure what this does, but it solved my problem
@@ -194,11 +184,6 @@
data = BUSMASTER_TIMEOUT;
outb(CY82_INDEX_TIMEOUT, CY82_INDEX_PORT);
outb(data, CY82_DATA_PORT);
-
-#if CY82C693_DEBUG_INFO
- printk(KERN_INFO "%s: Set IDE Bus Master TimeOut Register to 0x%X\n",
- drive->name, data);
-#endif /* CY82C693_DEBUG_INFO */
}
static void cy82c693_set_pio_mode(ide_drive_t *drive, const u8 pio)
@@ -239,8 +224,6 @@
pci_write_config_byte(dev, CY82_IDE_MASTER_IOR, pclk.time_16r);
pci_write_config_byte(dev, CY82_IDE_MASTER_IOW, pclk.time_16w);
pci_write_config_byte(dev, CY82_IDE_MASTER_8BIT, pclk.time_8);
-
- addrCtrl &= 0xF;
} else {
/*
* set slave drive
@@ -257,17 +240,7 @@
pci_write_config_byte(dev, CY82_IDE_SLAVE_IOR, pclk.time_16r);
pci_write_config_byte(dev, CY82_IDE_SLAVE_IOW, pclk.time_16w);
pci_write_config_byte(dev, CY82_IDE_SLAVE_8BIT, pclk.time_8);
-
- addrCtrl >>= 4;
- addrCtrl &= 0xF;
}
-
-#if CY82C693_DEBUG_INFO
- printk(KERN_INFO "%s (ch=%d, dev=%d): set PIO timing to "
- "(addr=0x%X, ior=0x%X, iow=0x%X, 8bit=0x%X)\n",
- drive->name, hwif->channel, drive->dn & 1,
- addrCtrl, pclk.time_16r, pclk.time_16w, pclk.time_8);
-#endif /* CY82C693_DEBUG_INFO */
}
static void __devinit init_iops_cy82c693(ide_hwif_t *hwif)
diff --git a/drivers/ide/hpt366.c b/drivers/ide/hpt366.c
index 7ce68ef..4d90ac2 100644
--- a/drivers/ide/hpt366.c
+++ b/drivers/ide/hpt366.c
@@ -297,68 +297,6 @@
/* XFER_PIO_0 */ 0xc0d08585
};
-#if 0
-/* These are the timing tables from the HighPoint open source drivers... */
-static u32 thirty_three_base_hpt37x[] = {
- /* XFER_UDMA_6 */ 0x12446231, /* 0x12646231 ?? */
- /* XFER_UDMA_5 */ 0x12446231,
- /* XFER_UDMA_4 */ 0x12446231,
- /* XFER_UDMA_3 */ 0x126c6231,
- /* XFER_UDMA_2 */ 0x12486231,
- /* XFER_UDMA_1 */ 0x124c6233,
- /* XFER_UDMA_0 */ 0x12506297,
-
- /* XFER_MW_DMA_2 */ 0x22406c31,
- /* XFER_MW_DMA_1 */ 0x22406c33,
- /* XFER_MW_DMA_0 */ 0x22406c97,
-
- /* XFER_PIO_4 */ 0x06414e31,
- /* XFER_PIO_3 */ 0x06414e42,
- /* XFER_PIO_2 */ 0x06414e53,
- /* XFER_PIO_1 */ 0x06814e93,
- /* XFER_PIO_0 */ 0x06814ea7
-};
-
-static u32 fifty_base_hpt37x[] = {
- /* XFER_UDMA_6 */ 0x12848242,
- /* XFER_UDMA_5 */ 0x12848242,
- /* XFER_UDMA_4 */ 0x12ac8242,
- /* XFER_UDMA_3 */ 0x128c8242,
- /* XFER_UDMA_2 */ 0x120c8242,
- /* XFER_UDMA_1 */ 0x12148254,
- /* XFER_UDMA_0 */ 0x121882ea,
-
- /* XFER_MW_DMA_2 */ 0x22808242,
- /* XFER_MW_DMA_1 */ 0x22808254,
- /* XFER_MW_DMA_0 */ 0x228082ea,
-
- /* XFER_PIO_4 */ 0x0a81f442,
- /* XFER_PIO_3 */ 0x0a81f443,
- /* XFER_PIO_2 */ 0x0a81f454,
- /* XFER_PIO_1 */ 0x0ac1f465,
- /* XFER_PIO_0 */ 0x0ac1f48a
-};
-
-static u32 sixty_six_base_hpt37x[] = {
- /* XFER_UDMA_6 */ 0x1c869c62,
- /* XFER_UDMA_5 */ 0x1cae9c62, /* 0x1c8a9c62 */
- /* XFER_UDMA_4 */ 0x1c8a9c62,
- /* XFER_UDMA_3 */ 0x1c8e9c62,
- /* XFER_UDMA_2 */ 0x1c929c62,
- /* XFER_UDMA_1 */ 0x1c9a9c62,
- /* XFER_UDMA_0 */ 0x1c829c62,
-
- /* XFER_MW_DMA_2 */ 0x2c829c62,
- /* XFER_MW_DMA_1 */ 0x2c829c66,
- /* XFER_MW_DMA_0 */ 0x2c829d2e,
-
- /* XFER_PIO_4 */ 0x0c829c62,
- /* XFER_PIO_3 */ 0x0c829c84,
- /* XFER_PIO_2 */ 0x0c829ca6,
- /* XFER_PIO_1 */ 0x0d029d26,
- /* XFER_PIO_0 */ 0x0d029d5e
-};
-#else
/*
* The following are the new timing tables with PIO mode data/taskfile transfer
* overclocking fixed...
@@ -424,16 +362,13 @@
/* XFER_PIO_1 */ 0x0d02ff26,
/* XFER_PIO_0 */ 0x0d42ff7f
};
-#endif
-#define HPT366_DEBUG_DRIVE_INFO 0
#define HPT371_ALLOW_ATA133_6 1
#define HPT302_ALLOW_ATA133_6 1
#define HPT372_ALLOW_ATA133_6 1
#define HPT370_ALLOW_ATA100_5 0
#define HPT366_ALLOW_ATA66_4 1
#define HPT366_ALLOW_ATA66_3 1
-#define HPT366_MAX_DEVS 8
/* Supported ATA clock frequencies */
enum ata_clock {
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index 58fc920..6a0e625 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -221,6 +221,8 @@
static DEFINE_MUTEX(idetape_ref_mutex);
+static DEFINE_MUTEX(idetape_chrdev_mutex);
+
static struct class *idetape_sysfs_class;
static void ide_tape_release(struct device *);
@@ -1457,10 +1459,11 @@
if (i >= MAX_HWIFS * MAX_DRIVES)
return -ENXIO;
- lock_kernel();
+ mutex_lock(&idetape_chrdev_mutex);
+
tape = ide_tape_get(NULL, true, i);
if (!tape) {
- unlock_kernel();
+ mutex_unlock(&idetape_chrdev_mutex);
return -ENXIO;
}
@@ -1519,12 +1522,15 @@
tape->door_locked = DOOR_LOCKED;
}
}
- unlock_kernel();
+ mutex_unlock(&idetape_chrdev_mutex);
+
return 0;
out_put_tape:
ide_tape_put(tape);
- unlock_kernel();
+
+ mutex_unlock(&idetape_chrdev_mutex);
+
return retval;
}
@@ -1551,7 +1557,8 @@
ide_drive_t *drive = tape->drive;
unsigned int minor = iminor(inode);
- lock_kernel();
+ mutex_lock(&idetape_chrdev_mutex);
+
tape = drive->driver_data;
ide_debug_log(IDE_DBG_FUNC, "enter");
@@ -1575,7 +1582,9 @@
}
clear_bit(ilog2(IDE_AFLAG_BUSY), &drive->atapi_flags);
ide_tape_put(tape);
- unlock_kernel();
+
+ mutex_unlock(&idetape_chrdev_mutex);
+
return 0;
}
diff --git a/drivers/ide/ide_platform.c b/drivers/ide/ide_platform.c
index b579fbe..42965b3 100644
--- a/drivers/ide/ide_platform.c
+++ b/drivers/ide/ide_platform.c
@@ -81,14 +81,14 @@
if (mmio) {
base = devm_ioremap(&pdev->dev,
- res_base->start, res_base->end - res_base->start + 1);
+ res_base->start, resource_size(res_base));
alt_base = devm_ioremap(&pdev->dev,
- res_alt->start, res_alt->end - res_alt->start + 1);
+ res_alt->start, resource_size(res_alt));
} else {
base = devm_ioport_map(&pdev->dev,
- res_base->start, res_base->end - res_base->start + 1);
+ res_base->start, resource_size(res_base));
alt_base = devm_ioport_map(&pdev->dev,
- res_alt->start, res_alt->end - res_alt->start + 1);
+ res_alt->start, resource_size(res_alt));
}
memset(&hw, 0, sizeof(hw));
diff --git a/drivers/ide/pdc202xx_old.c b/drivers/ide/pdc202xx_old.c
index cb812f3..35161dd 100644
--- a/drivers/ide/pdc202xx_old.c
+++ b/drivers/ide/pdc202xx_old.c
@@ -21,8 +21,6 @@
#define DRV_NAME "pdc202xx_old"
-#define PDC202XX_DEBUG_DRIVE_INFO 0
-
static void pdc_old_disable_66MHz_clock(ide_hwif_t *);
static void pdc202xx_set_mode(ide_drive_t *drive, const u8 speed)
@@ -34,11 +32,6 @@
u8 AP = 0, BP = 0, CP = 0;
u8 TA = 0, TB = 0, TC = 0;
-#if PDC202XX_DEBUG_DRIVE_INFO
- u32 drive_conf = 0;
- pci_read_config_dword(dev, drive_pci, &drive_conf);
-#endif
-
/*
* TODO: do this once per channel
*/
@@ -89,14 +82,6 @@
pci_write_config_byte(dev, drive_pci + 1, BP | TB);
pci_write_config_byte(dev, drive_pci + 2, CP | TC);
}
-
-#if PDC202XX_DEBUG_DRIVE_INFO
- printk(KERN_DEBUG "%s: %s drive%d 0x%08x ",
- drive->name, ide_xfer_verbose(speed),
- drive->dn, drive_conf);
- pci_read_config_dword(dev, drive_pci, &drive_conf);
- printk("0x%08x\n", drive_conf);
-#endif
}
static void pdc202xx_set_pio_mode(ide_drive_t *drive, const u8 pio)
diff --git a/drivers/ide/sis5513.c b/drivers/ide/sis5513.c
index 3b88eba..4687060 100644
--- a/drivers/ide/sis5513.c
+++ b/drivers/ide/sis5513.c
@@ -632,12 +632,3 @@
MODULE_AUTHOR("Lionel Bouton, L C Chang, Andre Hedrick, Vojtech Pavlik");
MODULE_DESCRIPTION("PCI driver module for SIS IDE");
MODULE_LICENSE("GPL");
-
-/*
- * TODO:
- * - CLEANUP
- * - More checks in the config registers (force values instead of
- * relying on the BIOS setting them correctly).
- * - Further optimisations ?
- * . for example ATA66+ regs 0x48 & 0x4A
- */
diff --git a/drivers/ide/sl82c105.c b/drivers/ide/sl82c105.c
index d698da4..3c2bbf0 100644
--- a/drivers/ide/sl82c105.c
+++ b/drivers/ide/sl82c105.c
@@ -24,13 +24,6 @@
#define DRV_NAME "sl82c105"
-#undef DEBUG
-
-#ifdef DEBUG
-#define DBG(arg) printk arg
-#else
-#define DBG(fmt,...)
-#endif
/*
* SL82C105 PCI config register 0x40 bits.
*/
@@ -104,9 +97,6 @@
unsigned long timings = (unsigned long)ide_get_drivedata(drive);
u16 drv_ctrl;
- DBG(("sl82c105_tune_chipset(drive:%s, speed:%s)\n",
- drive->name, ide_xfer_verbose(speed)));
-
drv_ctrl = mwdma_timings[speed - XFER_MW_DMA_0];
/*
@@ -196,8 +186,6 @@
struct pci_dev *dev = to_pci_dev(hwif->dev);
int reg = 0x44 + drive->dn * 4;
- DBG(("%s(drive:%s)\n", __func__, drive->name));
-
pci_write_config_word(dev, reg,
(unsigned long)ide_get_drivedata(drive) >> 16);
@@ -209,8 +197,6 @@
{
struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
- DBG(("sl82c105_dma_clear(drive:%s)\n", drive->name));
-
sl82c105_reset_host(dev);
}
@@ -218,11 +204,7 @@
{
struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
int reg = 0x44 + drive->dn * 4;
- int ret;
-
- DBG(("%s(drive:%s)\n", __func__, drive->name));
-
- ret = ide_dma_end(drive);
+ int ret = ide_dma_end(drive);
pci_write_config_word(dev, reg,
(unsigned long)ide_get_drivedata(drive));
@@ -239,8 +221,6 @@
struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
u32 val;
- DBG(("sl82c105_resetproc(drive:%s)\n", drive->name));
-
pci_read_config_dword(dev, 0x40, &val);
val |= (CTRL_P1F16 | CTRL_P0F16);
pci_write_config_dword(dev, 0x40, val);
@@ -291,8 +271,6 @@
{
u32 val;
- DBG(("init_chipset_sl82c105()\n"));
-
pci_read_config_dword(dev, 0x40, &val);
val |= CTRL_P0EN | CTRL_P0F16 | CTRL_P1F16;
pci_write_config_dword(dev, 0x40, val);
diff --git a/drivers/ide/slc90e66.c b/drivers/ide/slc90e66.c
index 9aec78d..1ccfb40 100644
--- a/drivers/ide/slc90e66.c
+++ b/drivers/ide/slc90e66.c
@@ -91,8 +91,7 @@
if (!(reg48 & u_flag))
pci_write_config_word(dev, 0x48, reg48|u_flag);
- /* FIXME: (reg4a & a_speed) ? */
- if ((reg4a & u_speed) != u_speed) {
+ if ((reg4a & a_speed) != u_speed) {
pci_write_config_word(dev, 0x4a, reg4a & ~a_speed);
pci_read_config_word(dev, 0x4a, ®4a);
pci_write_config_word(dev, 0x4a, reg4a|u_speed);
diff --git a/drivers/ide/tx4938ide.c b/drivers/ide/tx4938ide.c
index ea89fdd..fd59c0d 100644
--- a/drivers/ide/tx4938ide.c
+++ b/drivers/ide/tx4938ide.c
@@ -146,7 +146,7 @@
return -ENODEV;
if (!devm_request_mem_region(&pdev->dev, res->start,
- res->end - res->start + 1, "tx4938ide"))
+ resource_size(res), "tx4938ide"))
return -EBUSY;
mapbase = (unsigned long)devm_ioremap(&pdev->dev, res->start,
8 << pdata->ioport_shift);
diff --git a/drivers/ieee1394/dv1394.c b/drivers/ieee1394/dv1394.c
index 2cd00b5..9fd4a0d 100644
--- a/drivers/ieee1394/dv1394.c
+++ b/drivers/ieee1394/dv1394.c
@@ -125,7 +125,7 @@
0 - no debugging messages
1 - some debugging messages, but none during DMA frame transmission
2 - lots of messages, including during DMA frame transmission
- (will cause undeflows if your machine is too slow!)
+ (will cause underflows if your machine is too slow!)
*/
#define DV1394_DEBUG_LEVEL 0
diff --git a/drivers/infiniband/hw/cxgb3/cxio_hal.c b/drivers/infiniband/hw/cxgb3/cxio_hal.c
index 72ed339..0677fc7 100644
--- a/drivers/infiniband/hw/cxgb3/cxio_hal.c
+++ b/drivers/infiniband/hw/cxgb3/cxio_hal.c
@@ -589,7 +589,7 @@
/* write len bytes of data into addr (32B aligned address)
* If data is NULL, clear len byte of memory to zero.
- * caller aquires the ctrl_qp lock before the call
+ * caller acquires the ctrl_qp lock before the call
*/
static int cxio_hal_ctrl_qp_write_mem(struct cxio_rdev *rdev_p, u32 addr,
u32 len, void *data)
diff --git a/drivers/infiniband/hw/ipath/ipath_file_ops.c b/drivers/infiniband/hw/ipath/ipath_file_ops.c
index 40dbe54..73933a4 100644
--- a/drivers/infiniband/hw/ipath/ipath_file_ops.c
+++ b/drivers/infiniband/hw/ipath/ipath_file_ops.c
@@ -1821,7 +1821,6 @@
static int ipath_open(struct inode *in, struct file *fp)
{
/* The real work is performed later in ipath_assign_port() */
- cycle_kernel_lock();
fp->private_data = kzalloc(sizeof(struct ipath_filedata), GFP_KERNEL);
return fp->private_data ? 0 : -ENOMEM;
}
diff --git a/drivers/infiniband/hw/ipath/ipath_iba6110.c b/drivers/infiniband/hw/ipath/ipath_iba6110.c
index 4bd39c8..37d12e5 100644
--- a/drivers/infiniband/hw/ipath/ipath_iba6110.c
+++ b/drivers/infiniband/hw/ipath/ipath_iba6110.c
@@ -381,7 +381,7 @@
#define IPATH_GPIO_SCL \
(1ULL << (_IPATH_GPIO_SCL_NUM+INFINIPATH_EXTC_GPIOOE_SHIFT))
-/* keep the code below somewhat more readonable; not used elsewhere */
+/* keep the code below somewhat more readable; not used elsewhere */
#define _IPATH_HTLINK0_CRCBITS (infinipath_hwe_htclnkabyte0crcerr | \
infinipath_hwe_htclnkabyte1crcerr)
#define _IPATH_HTLINK1_CRCBITS (infinipath_hwe_htclnkbbyte0crcerr | \
diff --git a/drivers/infiniband/hw/ipath/ipath_sd7220.c b/drivers/infiniband/hw/ipath/ipath_sd7220.c
index aa47eb5..2a68d9f 100644
--- a/drivers/infiniband/hw/ipath/ipath_sd7220.c
+++ b/drivers/infiniband/hw/ipath/ipath_sd7220.c
@@ -614,7 +614,7 @@
* @wd: Write Data - value to set in register
* @mask: ones where data should be spliced into reg.
*
- * Basic register read/modify/write, with un-needed acesses elided. That is,
+ * Basic register read/modify/write, with un-needed accesses elided. That is,
* a mask of zero will prevent write, while a mask of 0xFF will prevent read.
* returns current (presumed, if a write was done) contents of selected
* register, or <0 if errors.
@@ -989,7 +989,7 @@
/* Set DFELTHFDR/HDR thresholds */
RXEQ_VAL(7, 8, 0, 0, 0, 0), /* FDR */
RXEQ_VAL(7, 0x21, 0, 0, 0, 0), /* HDR */
- /* Set TLTHFDR/HDR theshold */
+ /* Set TLTHFDR/HDR threshold */
RXEQ_VAL(7, 9, 2, 2, 2, 2), /* FDR */
RXEQ_VAL(7, 0x23, 2, 2, 2, 2), /* HDR */
/* Set Preamp setting 2 (ZFR/ZCNT) */
diff --git a/drivers/infiniband/hw/mlx4/qp.c b/drivers/infiniband/hw/mlx4/qp.c
index 219b103..256a00c 100644
--- a/drivers/infiniband/hw/mlx4/qp.c
+++ b/drivers/infiniband/hw/mlx4/qp.c
@@ -352,7 +352,7 @@
* anymore, so we do this only if selective signaling is off.
*
* Further, on 32-bit platforms, we can't use vmap() to make
- * the QP buffer virtually contigious. Thus we have to use
+ * the QP buffer virtually contiguous. Thus we have to use
* constant-sized WRs to make sure a WR is always fully within
* a single page-sized chunk.
*
diff --git a/drivers/infiniband/ulp/iser/iscsi_iser.c b/drivers/infiniband/ulp/iser/iscsi_iser.c
index add9188..5f7a6fc 100644
--- a/drivers/infiniband/ulp/iser/iscsi_iser.c
+++ b/drivers/infiniband/ulp/iser/iscsi_iser.c
@@ -625,6 +625,7 @@
ISCSI_USERNAME | ISCSI_PASSWORD |
ISCSI_USERNAME_IN | ISCSI_PASSWORD_IN |
ISCSI_FAST_ABORT | ISCSI_ABORT_TMO |
+ ISCSI_LU_RESET_TMO | ISCSI_TGT_RESET_TMO |
ISCSI_PING_TMO | ISCSI_RECV_TMO |
ISCSI_IFACE_NAME | ISCSI_INITIATOR_NAME,
.host_param_mask = ISCSI_HOST_HWADDRESS |
diff --git a/drivers/infiniband/ulp/iser/iser_verbs.c b/drivers/infiniband/ulp/iser/iser_verbs.c
index ea9e155..8579f32 100644
--- a/drivers/infiniband/ulp/iser/iser_verbs.c
+++ b/drivers/infiniband/ulp/iser/iser_verbs.c
@@ -499,7 +499,7 @@
/**
* starts the process of connecting to the target
- * sleeps untill the connection is established or rejected
+ * sleeps until the connection is established or rejected
*/
int iser_connect(struct iser_conn *ib_conn,
struct sockaddr_in *src_addr,
diff --git a/drivers/input/Kconfig b/drivers/input/Kconfig
index cd50c00..07c2cd4 100644
--- a/drivers/input/Kconfig
+++ b/drivers/input/Kconfig
@@ -8,7 +8,7 @@
config INPUT
tristate "Generic input layer (needed for keyboard, mouse, ...)" if EMBEDDED
default y
- ---help---
+ help
Say Y here if you have any input device (mouse, keyboard, tablet,
joystick, steering wheel ...) connected to your system and want
it to be available to applications. This includes standard PS/2
@@ -27,8 +27,7 @@
config INPUT_FF_MEMLESS
tristate "Support for memoryless force-feedback devices"
- default n
- ---help---
+ help
Say Y here if you have memoryless force-feedback input device
such as Logitech WingMan Force 3D, ThrustMaster FireStorm Dual
Power 2, or similar. You will also need to enable hardware-specific
@@ -52,12 +51,25 @@
To compile this driver as a module, choose M here: the
module will be called input-polldev.
+config INPUT_SPARSEKMAP
+ tristate "Sparse keymap support library"
+ help
+ Say Y here if you are using a driver for an input
+ device that uses sparse keymap. This option is only
+ useful for out-of-tree drivers since in-tree drivers
+ select it automatically.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called sparse-keymap.
+
comment "Userland interfaces"
config INPUT_MOUSEDEV
tristate "Mouse interface" if EMBEDDED
default y
- ---help---
+ help
Say Y here if you want your mouse to be accessible as char devices
13:32+ - /dev/input/mouseX and 13:63 - /dev/input/mice as an
emulated IntelliMouse Explorer PS/2 mouse. That way, all user space
@@ -73,7 +85,7 @@
bool "Provide legacy /dev/psaux device"
default y
depends on INPUT_MOUSEDEV
- ---help---
+ help
Say Y here if you want your mouse also be accessible as char device
10:1 - /dev/psaux. The data available through /dev/psaux is exactly
the same as the data from /dev/input/mice.
@@ -103,7 +115,7 @@
config INPUT_JOYDEV
tristate "Joystick interface"
- ---help---
+ help
Say Y here if you want your joystick or gamepad to be
accessible as char device 13:0+ - /dev/input/jsX device.
@@ -125,7 +137,7 @@
config INPUT_EVBUG
tristate "Event debugging"
- ---help---
+ help
Say Y here if you have a problem with the input subsystem and
want all events (keypresses, mouse movements), to be output to
the system log. While this is useful for debugging, it's also
@@ -140,7 +152,7 @@
config INPUT_APMPOWER
tristate "Input Power Event -> APM Bridge" if EMBEDDED
depends on INPUT && APM_EMULATION
- ---help---
+ help
Say Y here if you want suspend key events to trigger a user
requested suspend through APM. This is useful on embedded
systems where such behaviour is desired without userspace
@@ -153,6 +165,7 @@
tristate "Xen virtual keyboard and mouse support"
depends on XEN_FBDEV_FRONTEND
default y
+ select XEN_XENBUS_FRONTEND
help
This driver implements the front-end of the Xen virtual
keyboard and mouse device driver. It communicates with a back-end
diff --git a/drivers/input/Makefile b/drivers/input/Makefile
index 4c9c745..7ad212d 100644
--- a/drivers/input/Makefile
+++ b/drivers/input/Makefile
@@ -9,6 +9,7 @@
obj-$(CONFIG_INPUT_FF_MEMLESS) += ff-memless.o
obj-$(CONFIG_INPUT_POLLDEV) += input-polldev.o
+obj-$(CONFIG_INPUT_SPARSEKMAP) += sparse-keymap.o
obj-$(CONFIG_INPUT_MOUSEDEV) += mousedev.o
obj-$(CONFIG_INPUT_JOYDEV) += joydev.o
diff --git a/drivers/input/ff-core.c b/drivers/input/ff-core.c
index 38df81f..b2f07aa 100644
--- a/drivers/input/ff-core.c
+++ b/drivers/input/ff-core.c
@@ -353,7 +353,7 @@
EXPORT_SYMBOL_GPL(input_ff_create);
/**
- * input_ff_free() - frees force feedback portion of input device
+ * input_ff_destroy() - frees force feedback portion of input device
* @dev: input device supporting force feedback
*
* This function is only needed in error path as input core will
@@ -369,6 +369,7 @@
if (ff->destroy)
ff->destroy(ff);
kfree(ff->private);
+ kfree(ff->effects);
kfree(ff);
dev->ff = NULL;
}
diff --git a/drivers/input/input-polldev.c b/drivers/input/input-polldev.c
index 0d3ce7a..aa6713b 100644
--- a/drivers/input/input-polldev.c
+++ b/drivers/input/input-polldev.c
@@ -56,14 +56,10 @@
mutex_unlock(&polldev_mutex);
}
-static void input_polled_device_work(struct work_struct *work)
+static void input_polldev_queue_work(struct input_polled_dev *dev)
{
- struct input_polled_dev *dev =
- container_of(work, struct input_polled_dev, work.work);
unsigned long delay;
- dev->poll(dev);
-
delay = msecs_to_jiffies(dev->poll_interval);
if (delay >= HZ)
delay = round_jiffies_relative(delay);
@@ -71,6 +67,15 @@
queue_delayed_work(polldev_wq, &dev->work, delay);
}
+static void input_polled_device_work(struct work_struct *work)
+{
+ struct input_polled_dev *dev =
+ container_of(work, struct input_polled_dev, work.work);
+
+ dev->poll(dev);
+ input_polldev_queue_work(dev);
+}
+
static int input_open_polled_device(struct input_dev *input)
{
struct input_polled_dev *dev = input_get_drvdata(input);
@@ -80,11 +85,12 @@
if (error)
return error;
- if (dev->flush)
- dev->flush(dev);
+ if (dev->open)
+ dev->open(dev);
- queue_delayed_work(polldev_wq, &dev->work,
- msecs_to_jiffies(dev->poll_interval));
+ /* Only start polling if polling is enabled */
+ if (dev->poll_interval > 0)
+ queue_delayed_work(polldev_wq, &dev->work, 0);
return 0;
}
@@ -95,8 +101,88 @@
cancel_delayed_work_sync(&dev->work);
input_polldev_stop_workqueue();
+
+ if (dev->close)
+ dev->close(dev);
}
+/* SYSFS interface */
+
+static ssize_t input_polldev_get_poll(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct input_polled_dev *polldev = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%d\n", polldev->poll_interval);
+}
+
+static ssize_t input_polldev_set_poll(struct device *dev,
+ struct device_attribute *attr, const char *buf,
+ size_t count)
+{
+ struct input_polled_dev *polldev = dev_get_drvdata(dev);
+ struct input_dev *input = polldev->input;
+ unsigned long interval;
+
+ if (strict_strtoul(buf, 0, &interval))
+ return -EINVAL;
+
+ if (interval < polldev->poll_interval_min)
+ return -EINVAL;
+
+ if (interval > polldev->poll_interval_max)
+ return -EINVAL;
+
+ mutex_lock(&input->mutex);
+
+ polldev->poll_interval = interval;
+
+ if (input->users) {
+ cancel_delayed_work_sync(&polldev->work);
+ if (polldev->poll_interval > 0)
+ input_polldev_queue_work(polldev);
+ }
+
+ mutex_unlock(&input->mutex);
+
+ return count;
+}
+
+static DEVICE_ATTR(poll, S_IRUGO | S_IWUSR, input_polldev_get_poll,
+ input_polldev_set_poll);
+
+
+static ssize_t input_polldev_get_max(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct input_polled_dev *polldev = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%d\n", polldev->poll_interval_max);
+}
+
+static DEVICE_ATTR(max, S_IRUGO, input_polldev_get_max, NULL);
+
+static ssize_t input_polldev_get_min(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct input_polled_dev *polldev = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%d\n", polldev->poll_interval_min);
+}
+
+static DEVICE_ATTR(min, S_IRUGO, input_polldev_get_min, NULL);
+
+static struct attribute *sysfs_attrs[] = {
+ &dev_attr_poll.attr,
+ &dev_attr_max.attr,
+ &dev_attr_min.attr,
+ NULL
+};
+
+static struct attribute_group input_polldev_attribute_group = {
+ .attrs = sysfs_attrs
+};
+
/**
* input_allocate_polled_device - allocated memory polled device
*
@@ -126,7 +212,7 @@
* @dev: device to free
*
* The function frees memory allocated for polling device and drops
- * reference to the associated input device (if present).
+ * reference to the associated input device.
*/
void input_free_polled_device(struct input_polled_dev *dev)
{
@@ -150,15 +236,38 @@
int input_register_polled_device(struct input_polled_dev *dev)
{
struct input_dev *input = dev->input;
+ int error;
input_set_drvdata(input, dev);
INIT_DELAYED_WORK(&dev->work, input_polled_device_work);
if (!dev->poll_interval)
dev->poll_interval = 500;
+ if (!dev->poll_interval_max)
+ dev->poll_interval_max = dev->poll_interval;
input->open = input_open_polled_device;
input->close = input_close_polled_device;
- return input_register_device(input);
+ error = input_register_device(input);
+ if (error)
+ return error;
+
+ error = sysfs_create_group(&input->dev.kobj,
+ &input_polldev_attribute_group);
+ if (error) {
+ input_unregister_device(input);
+ return error;
+ }
+
+ /*
+ * Take extra reference to the underlying input device so
+ * that it survives call to input_unregister_polled_device()
+ * and is deleted only after input_free_polled_device()
+ * has been invoked. This is needed to ease task of freeing
+ * sparse keymaps.
+ */
+ input_get_device(input);
+
+ return 0;
}
EXPORT_SYMBOL(input_register_polled_device);
@@ -169,13 +278,13 @@
* The function unregisters previously registered polled input
* device from input layer. Polling is stopped and device is
* ready to be freed with call to input_free_polled_device().
- * Callers should not attempt to access dev->input pointer
- * after calling this function.
*/
void input_unregister_polled_device(struct input_polled_dev *dev)
{
+ sysfs_remove_group(&dev->input->dev.kobj,
+ &input_polldev_attribute_group);
+
input_unregister_device(dev->input);
- dev->input = NULL;
}
EXPORT_SYMBOL(input_unregister_polled_device);
diff --git a/drivers/input/input.c b/drivers/input/input.c
index 2266ecb..5c16001 100644
--- a/drivers/input/input.c
+++ b/drivers/input/input.c
@@ -1658,6 +1658,38 @@
EXPORT_SYMBOL(input_unregister_handler);
/**
+ * input_handler_for_each_handle - handle iterator
+ * @handler: input handler to iterate
+ * @data: data for the callback
+ * @fn: function to be called for each handle
+ *
+ * Iterate over @bus's list of devices, and call @fn for each, passing
+ * it @data and stop when @fn returns a non-zero value. The function is
+ * using RCU to traverse the list and therefore may be usind in atonic
+ * contexts. The @fn callback is invoked from RCU critical section and
+ * thus must not sleep.
+ */
+int input_handler_for_each_handle(struct input_handler *handler, void *data,
+ int (*fn)(struct input_handle *, void *))
+{
+ struct input_handle *handle;
+ int retval = 0;
+
+ rcu_read_lock();
+
+ list_for_each_entry_rcu(handle, &handler->h_list, h_node) {
+ retval = fn(handle, data);
+ if (retval)
+ break;
+ }
+
+ rcu_read_unlock();
+
+ return retval;
+}
+EXPORT_SYMBOL(input_handler_for_each_handle);
+
+/**
* input_register_handle - register a new input handle
* @handle: handle to register
*
@@ -1690,7 +1722,7 @@
* we can't be racing with input_unregister_handle()
* and so separate lock is not needed here.
*/
- list_add_tail(&handle->h_node, &handler->h_list);
+ list_add_tail_rcu(&handle->h_node, &handler->h_list);
if (handler->start)
handler->start(handle);
@@ -1713,7 +1745,7 @@
{
struct input_dev *dev = handle->dev;
- list_del_init(&handle->h_node);
+ list_del_rcu(&handle->h_node);
/*
* Take dev->mutex to prevent race with input_release_device().
@@ -1721,6 +1753,7 @@
mutex_lock(&dev->mutex);
list_del_rcu(&handle->d_node);
mutex_unlock(&dev->mutex);
+
synchronize_rcu();
}
EXPORT_SYMBOL(input_unregister_handle);
diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c
index 79e3edc..482cb12 100644
--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -125,6 +125,7 @@
{ 0x0738, 0x4540, "Mad Catz Beat Pad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
{ 0x0738, 0x4556, "Mad Catz Lynx Wireless Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
{ 0x0738, 0x4716, "Mad Catz Wired Xbox 360 Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX360 },
+ { 0x0738, 0x4738, "Mad Catz Wired Xbox 360 Controller (SFIV)", MAP_DPAD_TO_AXES, XTYPE_XBOX360 },
{ 0x0738, 0x6040, "Mad Catz Beat Pad Pro", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
{ 0x0c12, 0x8802, "Zeroplus Xbox Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
{ 0x0c12, 0x880a, "Pelican Eclipse PL-2023", MAP_DPAD_TO_AXES, XTYPE_XBOX },
@@ -146,6 +147,7 @@
{ 0x146b, 0x0601, "BigBen Interactive XBOX 360 Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX360 },
{ 0x045e, 0x028e, "Microsoft X-Box 360 pad", MAP_DPAD_TO_AXES, XTYPE_XBOX360 },
{ 0x1bad, 0x0003, "Harmonix Rock Band Drumkit", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x0f0d, 0x0016, "Hori Real Arcade Pro.EX", MAP_DPAD_TO_AXES, XTYPE_XBOX360 },
{ 0xffff, 0xffff, "Chinese-made Xbox Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
{ 0x0000, 0x0000, "Generic X-Box pad", MAP_DPAD_UNKNOWN, XTYPE_UNKNOWN }
};
@@ -212,6 +214,7 @@
XPAD_XBOX360_VENDOR(0x1430), /* RedOctane X-Box 360 controllers */
XPAD_XBOX360_VENDOR(0x146b), /* BigBen Interactive Controllers */
XPAD_XBOX360_VENDOR(0x1bad), /* Rock Band Drums */
+ XPAD_XBOX360_VENDOR(0x0f0d), /* Hori Controllers */
{ }
};
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index ee98b1b..203b88a 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -361,6 +361,16 @@
To compile this driver as a module, choose M here: the
module will be called sh_keysc.
+config KEYBOARD_DAVINCI
+ tristate "TI DaVinci Key Scan"
+ depends on ARCH_DAVINCI_DM365
+ help
+ Say Y to enable keypad module support for the TI DaVinci
+ platforms (DM365).
+
+ To compile this driver as a module, choose M here: the
+ module will be called davinci_keyscan.
+
config KEYBOARD_OMAP
tristate "TI OMAP keypad support"
depends on (ARCH_OMAP1 || ARCH_OMAP2)
diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
index babad5e..68c0172 100644
--- a/drivers/input/keyboard/Makefile
+++ b/drivers/input/keyboard/Makefile
@@ -11,6 +11,7 @@
obj-$(CONFIG_KEYBOARD_ATKBD) += atkbd.o
obj-$(CONFIG_KEYBOARD_BFIN) += bf54x-keys.o
obj-$(CONFIG_KEYBOARD_CORGI) += corgikbd.o
+obj-$(CONFIG_KEYBOARD_DAVINCI) += davinci_keyscan.o
obj-$(CONFIG_KEYBOARD_EP93XX) += ep93xx_keypad.o
obj-$(CONFIG_KEYBOARD_GPIO) += gpio_keys.o
obj-$(CONFIG_KEYBOARD_HIL) += hil_kbd.o
diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c
index 28e6110..a357357 100644
--- a/drivers/input/keyboard/atkbd.c
+++ b/drivers/input/keyboard/atkbd.c
@@ -1567,9 +1567,8 @@
return 0;
}
-static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = {
+static const struct dmi_system_id atkbd_dmi_quirk_table[] __initconst = {
{
- .ident = "Dell Laptop",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
DMI_MATCH(DMI_CHASSIS_TYPE, "8"), /* Portable */
@@ -1578,7 +1577,6 @@
.driver_data = atkbd_dell_laptop_forced_release_keys,
},
{
- .ident = "Dell Laptop",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"),
DMI_MATCH(DMI_CHASSIS_TYPE, "8"), /* Portable */
@@ -1587,7 +1585,6 @@
.driver_data = atkbd_dell_laptop_forced_release_keys,
},
{
- .ident = "HP 2133",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
DMI_MATCH(DMI_PRODUCT_NAME, "HP 2133"),
@@ -1596,7 +1593,6 @@
.driver_data = atkbd_hp_forced_release_keys,
},
{
- .ident = "HP Pavilion ZV6100",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
DMI_MATCH(DMI_PRODUCT_NAME, "Pavilion ZV6100"),
@@ -1605,7 +1601,6 @@
.driver_data = atkbd_volume_forced_release_keys,
},
{
- .ident = "HP Presario R4000",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
DMI_MATCH(DMI_PRODUCT_NAME, "Presario R4000"),
@@ -1614,7 +1609,6 @@
.driver_data = atkbd_volume_forced_release_keys,
},
{
- .ident = "HP Presario R4100",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
DMI_MATCH(DMI_PRODUCT_NAME, "Presario R4100"),
@@ -1623,7 +1617,6 @@
.driver_data = atkbd_volume_forced_release_keys,
},
{
- .ident = "HP Presario R4200",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
DMI_MATCH(DMI_PRODUCT_NAME, "Presario R4200"),
@@ -1632,7 +1625,7 @@
.driver_data = atkbd_volume_forced_release_keys,
},
{
- .ident = "Inventec Symphony",
+ /* Inventec Symphony */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "INVENTEC"),
DMI_MATCH(DMI_PRODUCT_NAME, "SYMPHONY 6.0/7.0"),
@@ -1641,7 +1634,7 @@
.driver_data = atkbd_volume_forced_release_keys,
},
{
- .ident = "Samsung NC10",
+ /* Samsung NC10 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
DMI_MATCH(DMI_PRODUCT_NAME, "NC10"),
@@ -1650,7 +1643,7 @@
.driver_data = atkbd_samsung_forced_release_keys,
},
{
- .ident = "Samsung NC20",
+ /* Samsung NC20 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
DMI_MATCH(DMI_PRODUCT_NAME, "NC20"),
@@ -1659,7 +1652,7 @@
.driver_data = atkbd_samsung_forced_release_keys,
},
{
- .ident = "Samsung SQ45S70S",
+ /* Samsung SQ45S70S */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
DMI_MATCH(DMI_PRODUCT_NAME, "SQ45S70S"),
@@ -1668,7 +1661,7 @@
.driver_data = atkbd_samsung_forced_release_keys,
},
{
- .ident = "Fujitsu Amilo PA 1510",
+ /* Fujitsu Amilo PA 1510 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pa 1510"),
@@ -1677,7 +1670,7 @@
.driver_data = atkbd_volume_forced_release_keys,
},
{
- .ident = "Fujitsu Amilo Pi 3525",
+ /* Fujitsu Amilo Pi 3525 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pi 3525"),
@@ -1686,7 +1679,7 @@
.driver_data = atkbd_amilo_pi3525_forced_release_keys,
},
{
- .ident = "Fujitsu Amilo Xi 3650",
+ /* Fujitsu Amilo Xi 3650 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Xi 3650"),
@@ -1695,7 +1688,6 @@
.driver_data = atkbd_amilo_xi3650_forced_release_keys,
},
{
- .ident = "Soltech Corporation TA12",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Soltech Corporation"),
DMI_MATCH(DMI_PRODUCT_NAME, "TA12"),
@@ -1704,7 +1696,7 @@
.driver_data = atkdb_soltech_ta12_forced_release_keys,
},
{
- .ident = "OQO Model 01+",
+ /* OQO Model 01+ */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "OQO"),
DMI_MATCH(DMI_PRODUCT_NAME, "ZEPTO"),
diff --git a/drivers/input/keyboard/davinci_keyscan.c b/drivers/input/keyboard/davinci_keyscan.c
new file mode 100644
index 0000000..6e52d85
--- /dev/null
+++ b/drivers/input/keyboard/davinci_keyscan.c
@@ -0,0 +1,337 @@
+/*
+ * DaVinci Key Scan Driver for TI platforms
+ *
+ * Copyright (C) 2009 Texas Instruments, Inc
+ *
+ * Author: Miguel Aguilar <miguel.aguilar@ridgerun.com>
+ *
+ * Intial Code: Sandeep Paulraj <s-paulraj@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/types.h>
+#include <linux/input.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/errno.h>
+
+#include <asm/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <mach/keyscan.h>
+
+/* Key scan registers */
+#define DAVINCI_KEYSCAN_KEYCTRL 0x0000
+#define DAVINCI_KEYSCAN_INTENA 0x0004
+#define DAVINCI_KEYSCAN_INTFLAG 0x0008
+#define DAVINCI_KEYSCAN_INTCLR 0x000c
+#define DAVINCI_KEYSCAN_STRBWIDTH 0x0010
+#define DAVINCI_KEYSCAN_INTERVAL 0x0014
+#define DAVINCI_KEYSCAN_CONTTIME 0x0018
+#define DAVINCI_KEYSCAN_CURRENTST 0x001c
+#define DAVINCI_KEYSCAN_PREVSTATE 0x0020
+#define DAVINCI_KEYSCAN_EMUCTRL 0x0024
+#define DAVINCI_KEYSCAN_IODFTCTRL 0x002c
+
+/* Key Control Register (KEYCTRL) */
+#define DAVINCI_KEYSCAN_KEYEN 0x00000001
+#define DAVINCI_KEYSCAN_PREVMODE 0x00000002
+#define DAVINCI_KEYSCAN_CHATOFF 0x00000004
+#define DAVINCI_KEYSCAN_AUTODET 0x00000008
+#define DAVINCI_KEYSCAN_SCANMODE 0x00000010
+#define DAVINCI_KEYSCAN_OUTTYPE 0x00000020
+
+/* Masks for the interrupts */
+#define DAVINCI_KEYSCAN_INT_CONT 0x00000008
+#define DAVINCI_KEYSCAN_INT_OFF 0x00000004
+#define DAVINCI_KEYSCAN_INT_ON 0x00000002
+#define DAVINCI_KEYSCAN_INT_CHANGE 0x00000001
+#define DAVINCI_KEYSCAN_INT_ALL 0x0000000f
+
+struct davinci_ks {
+ struct input_dev *input;
+ struct davinci_ks_platform_data *pdata;
+ int irq;
+ void __iomem *base;
+ resource_size_t pbase;
+ size_t base_size;
+ unsigned short keymap[];
+};
+
+/* Initializing the kp Module */
+static int __init davinci_ks_initialize(struct davinci_ks *davinci_ks)
+{
+ struct device *dev = &davinci_ks->input->dev;
+ struct davinci_ks_platform_data *pdata = davinci_ks->pdata;
+ u32 matrix_ctrl;
+
+ /* Enable all interrupts */
+ __raw_writel(DAVINCI_KEYSCAN_INT_ALL,
+ davinci_ks->base + DAVINCI_KEYSCAN_INTENA);
+
+ /* Clear interrupts if any */
+ __raw_writel(DAVINCI_KEYSCAN_INT_ALL,
+ davinci_ks->base + DAVINCI_KEYSCAN_INTCLR);
+
+ /* Setup the scan period = strobe + interval */
+ __raw_writel(pdata->strobe,
+ davinci_ks->base + DAVINCI_KEYSCAN_STRBWIDTH);
+ __raw_writel(pdata->interval,
+ davinci_ks->base + DAVINCI_KEYSCAN_INTERVAL);
+ __raw_writel(0x01,
+ davinci_ks->base + DAVINCI_KEYSCAN_CONTTIME);
+
+ /* Define matrix type */
+ switch (pdata->matrix_type) {
+ case DAVINCI_KEYSCAN_MATRIX_4X4:
+ matrix_ctrl = 0;
+ break;
+ case DAVINCI_KEYSCAN_MATRIX_5X3:
+ matrix_ctrl = (1 << 6);
+ break;
+ default:
+ dev_err(dev->parent, "wrong matrix type\n");
+ return -EINVAL;
+ }
+
+ /* Enable key scan module and set matrix type */
+ __raw_writel(DAVINCI_KEYSCAN_AUTODET | DAVINCI_KEYSCAN_KEYEN |
+ matrix_ctrl, davinci_ks->base + DAVINCI_KEYSCAN_KEYCTRL);
+
+ return 0;
+}
+
+static irqreturn_t davinci_ks_interrupt(int irq, void *dev_id)
+{
+ struct davinci_ks *davinci_ks = dev_id;
+ struct device *dev = &davinci_ks->input->dev;
+ unsigned short *keymap = davinci_ks->keymap;
+ int keymapsize = davinci_ks->pdata->keymapsize;
+ u32 prev_status, new_status, changed;
+ bool release;
+ int keycode = KEY_UNKNOWN;
+ int i;
+
+ /* Disable interrupt */
+ __raw_writel(0x0, davinci_ks->base + DAVINCI_KEYSCAN_INTENA);
+
+ /* Reading previous and new status of the key scan */
+ prev_status = __raw_readl(davinci_ks->base + DAVINCI_KEYSCAN_PREVSTATE);
+ new_status = __raw_readl(davinci_ks->base + DAVINCI_KEYSCAN_CURRENTST);
+
+ changed = prev_status ^ new_status;
+
+ if (changed) {
+ /*
+ * It goes through all bits in 'changed' to ensure
+ * that no key changes are being missed
+ */
+ for (i = 0 ; i < keymapsize; i++) {
+ if ((changed>>i) & 0x1) {
+ keycode = keymap[i];
+ release = (new_status >> i) & 0x1;
+ dev_dbg(dev->parent, "key %d %s\n", keycode,
+ release ? "released" : "pressed");
+ input_report_key(davinci_ks->input, keycode,
+ !release);
+ input_sync(davinci_ks->input);
+ }
+ }
+ /* Clearing interrupt */
+ __raw_writel(DAVINCI_KEYSCAN_INT_ALL,
+ davinci_ks->base + DAVINCI_KEYSCAN_INTCLR);
+ }
+
+ /* Enable interrupts */
+ __raw_writel(0x1, davinci_ks->base + DAVINCI_KEYSCAN_INTENA);
+
+ return IRQ_HANDLED;
+}
+
+static int __init davinci_ks_probe(struct platform_device *pdev)
+{
+ struct davinci_ks *davinci_ks;
+ struct input_dev *key_dev;
+ struct resource *res, *mem;
+ struct device *dev = &pdev->dev;
+ struct davinci_ks_platform_data *pdata = pdev->dev.platform_data;
+ int error, i;
+
+ if (!pdata->keymap) {
+ dev_dbg(dev, "no keymap from pdata\n");
+ return -EINVAL;
+ }
+
+ davinci_ks = kzalloc(sizeof(struct davinci_ks) +
+ sizeof(unsigned short) * pdata->keymapsize, GFP_KERNEL);
+ if (!davinci_ks) {
+ dev_dbg(dev, "could not allocate memory for private data\n");
+ return -ENOMEM;
+ }
+
+ memcpy(davinci_ks->keymap, pdata->keymap,
+ sizeof(unsigned short) * pdata->keymapsize);
+
+ key_dev = input_allocate_device();
+ if (!key_dev) {
+ dev_dbg(dev, "could not allocate input device\n");
+ error = -ENOMEM;
+ goto fail1;
+ }
+
+ davinci_ks->input = key_dev;
+
+ davinci_ks->irq = platform_get_irq(pdev, 0);
+ if (davinci_ks->irq < 0) {
+ dev_err(dev, "no key scan irq\n");
+ error = davinci_ks->irq;
+ goto fail2;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(dev, "no mem resource\n");
+ error = -EINVAL;
+ goto fail2;
+ }
+
+ davinci_ks->pbase = res->start;
+ davinci_ks->base_size = resource_size(res);
+
+ mem = request_mem_region(davinci_ks->pbase, davinci_ks->base_size,
+ pdev->name);
+ if (!mem) {
+ dev_err(dev, "key scan registers at %08x are not free\n",
+ davinci_ks->pbase);
+ error = -EBUSY;
+ goto fail2;
+ }
+
+ davinci_ks->base = ioremap(davinci_ks->pbase, davinci_ks->base_size);
+ if (!davinci_ks->base) {
+ dev_err(dev, "can't ioremap MEM resource.\n");
+ error = -ENOMEM;
+ goto fail3;
+ }
+
+ /* Enable auto repeat feature of Linux input subsystem */
+ if (pdata->rep)
+ __set_bit(EV_REP, key_dev->evbit);
+
+ /* Setup input device */
+ __set_bit(EV_KEY, key_dev->evbit);
+
+ /* Setup the platform data */
+ davinci_ks->pdata = pdata;
+
+ for (i = 0; i < davinci_ks->pdata->keymapsize; i++)
+ __set_bit(davinci_ks->pdata->keymap[i], key_dev->keybit);
+
+ key_dev->name = "davinci_keyscan";
+ key_dev->phys = "davinci_keyscan/input0";
+ key_dev->dev.parent = &pdev->dev;
+ key_dev->id.bustype = BUS_HOST;
+ key_dev->id.vendor = 0x0001;
+ key_dev->id.product = 0x0001;
+ key_dev->id.version = 0x0001;
+ key_dev->keycode = davinci_ks->keymap;
+ key_dev->keycodesize = sizeof(davinci_ks->keymap[0]);
+ key_dev->keycodemax = davinci_ks->pdata->keymapsize;
+
+ error = input_register_device(davinci_ks->input);
+ if (error < 0) {
+ dev_err(dev, "unable to register davinci key scan device\n");
+ goto fail4;
+ }
+
+ error = request_irq(davinci_ks->irq, davinci_ks_interrupt,
+ IRQF_DISABLED, pdev->name, davinci_ks);
+ if (error < 0) {
+ dev_err(dev, "unable to register davinci key scan interrupt\n");
+ goto fail5;
+ }
+
+ error = davinci_ks_initialize(davinci_ks);
+ if (error < 0) {
+ dev_err(dev, "unable to initialize davinci key scan device\n");
+ goto fail6;
+ }
+
+ platform_set_drvdata(pdev, davinci_ks);
+ return 0;
+
+fail6:
+ free_irq(davinci_ks->irq, davinci_ks);
+fail5:
+ input_unregister_device(davinci_ks->input);
+ key_dev = NULL;
+fail4:
+ iounmap(davinci_ks->base);
+fail3:
+ release_mem_region(davinci_ks->pbase, davinci_ks->base_size);
+fail2:
+ input_free_device(key_dev);
+fail1:
+ kfree(davinci_ks);
+
+ return error;
+}
+
+static int __devexit davinci_ks_remove(struct platform_device *pdev)
+{
+ struct davinci_ks *davinci_ks = platform_get_drvdata(pdev);
+
+ free_irq(davinci_ks->irq, davinci_ks);
+
+ input_unregister_device(davinci_ks->input);
+
+ iounmap(davinci_ks->base);
+ release_mem_region(davinci_ks->pbase, davinci_ks->base_size);
+
+ platform_set_drvdata(pdev, NULL);
+
+ kfree(davinci_ks);
+
+ return 0;
+}
+
+static struct platform_driver davinci_ks_driver = {
+ .driver = {
+ .name = "davinci_keyscan",
+ .owner = THIS_MODULE,
+ },
+ .remove = __devexit_p(davinci_ks_remove),
+};
+
+static int __init davinci_ks_init(void)
+{
+ return platform_driver_probe(&davinci_ks_driver, davinci_ks_probe);
+}
+module_init(davinci_ks_init);
+
+static void __exit davinci_ks_exit(void)
+{
+ platform_driver_unregister(&davinci_ks_driver);
+}
+module_exit(davinci_ks_exit);
+
+MODULE_AUTHOR("Miguel Aguilar");
+MODULE_DESCRIPTION("Texas Instruments DaVinci Key Scan Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c
index 77d1309..1aff3b7 100644
--- a/drivers/input/keyboard/gpio_keys.c
+++ b/drivers/input/keyboard/gpio_keys.c
@@ -23,8 +23,7 @@
#include <linux/input.h>
#include <linux/gpio_keys.h>
#include <linux/workqueue.h>
-
-#include <asm/gpio.h>
+#include <linux/gpio.h>
struct gpio_button_data {
struct gpio_keys_button *button;
@@ -38,10 +37,8 @@
struct gpio_button_data data[0];
};
-static void gpio_keys_report_event(struct work_struct *work)
+static void gpio_keys_report_event(struct gpio_button_data *bdata)
{
- struct gpio_button_data *bdata =
- container_of(work, struct gpio_button_data, work);
struct gpio_keys_button *button = bdata->button;
struct input_dev *input = bdata->input;
unsigned int type = button->type ?: EV_KEY;
@@ -51,6 +48,14 @@
input_sync(input);
}
+static void gpio_keys_work_func(struct work_struct *work)
+{
+ struct gpio_button_data *bdata =
+ container_of(work, struct gpio_button_data, work);
+
+ gpio_keys_report_event(bdata);
+}
+
static void gpio_keys_timer(unsigned long _data)
{
struct gpio_button_data *data = (struct gpio_button_data *)_data;
@@ -74,10 +79,62 @@
return IRQ_HANDLED;
}
+static int __devinit gpio_keys_setup_key(struct device *dev,
+ struct gpio_button_data *bdata,
+ struct gpio_keys_button *button)
+{
+ char *desc = button->desc ? button->desc : "gpio_keys";
+ int irq, error;
+
+ setup_timer(&bdata->timer, gpio_keys_timer, (unsigned long)bdata);
+ INIT_WORK(&bdata->work, gpio_keys_work_func);
+
+ error = gpio_request(button->gpio, desc);
+ if (error < 0) {
+ dev_err(dev, "failed to request GPIO %d, error %d\n",
+ button->gpio, error);
+ goto fail2;
+ }
+
+ error = gpio_direction_input(button->gpio);
+ if (error < 0) {
+ dev_err(dev, "failed to configure"
+ " direction for GPIO %d, error %d\n",
+ button->gpio, error);
+ goto fail3;
+ }
+
+ irq = gpio_to_irq(button->gpio);
+ if (irq < 0) {
+ error = irq;
+ dev_err(dev, "Unable to get irq number for GPIO %d, error %d\n",
+ button->gpio, error);
+ goto fail3;
+ }
+
+ error = request_irq(irq, gpio_keys_isr,
+ IRQF_SHARED |
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ desc, bdata);
+ if (error) {
+ dev_err(dev, "Unable to claim irq %d; error %d\n",
+ irq, error);
+ goto fail3;
+ }
+
+ return 0;
+
+fail3:
+ gpio_free(button->gpio);
+fail2:
+ return error;
+}
+
static int __devinit gpio_keys_probe(struct platform_device *pdev)
{
struct gpio_keys_platform_data *pdata = pdev->dev.platform_data;
struct gpio_keys_drvdata *ddata;
+ struct device *dev = &pdev->dev;
struct input_dev *input;
int i, error;
int wakeup = 0;
@@ -87,6 +144,7 @@
GFP_KERNEL);
input = input_allocate_device();
if (!ddata || !input) {
+ dev_err(dev, "failed to allocate state\n");
error = -ENOMEM;
goto fail1;
}
@@ -111,52 +169,14 @@
for (i = 0; i < pdata->nbuttons; i++) {
struct gpio_keys_button *button = &pdata->buttons[i];
struct gpio_button_data *bdata = &ddata->data[i];
- int irq;
unsigned int type = button->type ?: EV_KEY;
bdata->input = input;
bdata->button = button;
- setup_timer(&bdata->timer,
- gpio_keys_timer, (unsigned long)bdata);
- INIT_WORK(&bdata->work, gpio_keys_report_event);
- error = gpio_request(button->gpio, button->desc ?: "gpio_keys");
- if (error < 0) {
- pr_err("gpio-keys: failed to request GPIO %d,"
- " error %d\n", button->gpio, error);
+ error = gpio_keys_setup_key(dev, bdata, button);
+ if (error)
goto fail2;
- }
-
- error = gpio_direction_input(button->gpio);
- if (error < 0) {
- pr_err("gpio-keys: failed to configure input"
- " direction for GPIO %d, error %d\n",
- button->gpio, error);
- gpio_free(button->gpio);
- goto fail2;
- }
-
- irq = gpio_to_irq(button->gpio);
- if (irq < 0) {
- error = irq;
- pr_err("gpio-keys: Unable to get irq number"
- " for GPIO %d, error %d\n",
- button->gpio, error);
- gpio_free(button->gpio);
- goto fail2;
- }
-
- error = request_irq(irq, gpio_keys_isr,
- IRQF_SHARED |
- IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
- button->desc ? button->desc : "gpio_keys",
- bdata);
- if (error) {
- pr_err("gpio-keys: Unable to claim irq %d; error %d\n",
- irq, error);
- gpio_free(button->gpio);
- goto fail2;
- }
if (button->wakeup)
wakeup = 1;
@@ -166,11 +186,16 @@
error = input_register_device(input);
if (error) {
- pr_err("gpio-keys: Unable to register input device, "
+ dev_err(dev, "Unable to register input device, "
"error: %d\n", error);
goto fail2;
}
+ /* get current state of buttons */
+ for (i = 0; i < pdata->nbuttons; i++)
+ gpio_keys_report_event(&ddata->data[i]);
+ input_sync(input);
+
device_init_wakeup(&pdev->dev, wakeup);
return 0;
@@ -239,18 +264,21 @@
static int gpio_keys_resume(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
+ struct gpio_keys_drvdata *ddata = platform_get_drvdata(pdev);
struct gpio_keys_platform_data *pdata = pdev->dev.platform_data;
int i;
- if (device_may_wakeup(&pdev->dev)) {
- for (i = 0; i < pdata->nbuttons; i++) {
- struct gpio_keys_button *button = &pdata->buttons[i];
- if (button->wakeup) {
- int irq = gpio_to_irq(button->gpio);
- disable_irq_wake(irq);
- }
+ for (i = 0; i < pdata->nbuttons; i++) {
+
+ struct gpio_keys_button *button = &pdata->buttons[i];
+ if (button->wakeup && device_may_wakeup(&pdev->dev)) {
+ int irq = gpio_to_irq(button->gpio);
+ disable_irq_wake(irq);
}
+
+ gpio_keys_report_event(&ddata->data[i]);
}
+ input_sync(ddata->input);
return 0;
}
diff --git a/drivers/input/keyboard/lkkbd.c b/drivers/input/keyboard/lkkbd.c
index f9847e0..fa9bb6d 100644
--- a/drivers/input/keyboard/lkkbd.c
+++ b/drivers/input/keyboard/lkkbd.c
@@ -72,9 +72,9 @@
#define DRIVER_DESC "LK keyboard driver"
-MODULE_AUTHOR ("Jan-Benedict Glaw <jbglaw@lug-owl.de>");
-MODULE_DESCRIPTION (DRIVER_DESC);
-MODULE_LICENSE ("GPL");
+MODULE_AUTHOR("Jan-Benedict Glaw <jbglaw@lug-owl.de>");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
/*
* Known parameters:
@@ -85,27 +85,27 @@
* Please notice that there's not yet an API to set these at runtime.
*/
static int bell_volume = 100; /* % */
-module_param (bell_volume, int, 0);
-MODULE_PARM_DESC (bell_volume, "Bell volume (in %). default is 100%");
+module_param(bell_volume, int, 0);
+MODULE_PARM_DESC(bell_volume, "Bell volume (in %). default is 100%");
static int keyclick_volume = 100; /* % */
-module_param (keyclick_volume, int, 0);
-MODULE_PARM_DESC (keyclick_volume, "Keyclick volume (in %), default is 100%");
+module_param(keyclick_volume, int, 0);
+MODULE_PARM_DESC(keyclick_volume, "Keyclick volume (in %), default is 100%");
static int ctrlclick_volume = 100; /* % */
-module_param (ctrlclick_volume, int, 0);
-MODULE_PARM_DESC (ctrlclick_volume, "Ctrlclick volume (in %), default is 100%");
+module_param(ctrlclick_volume, int, 0);
+MODULE_PARM_DESC(ctrlclick_volume, "Ctrlclick volume (in %), default is 100%");
static int lk201_compose_is_alt;
-module_param (lk201_compose_is_alt, int, 0);
-MODULE_PARM_DESC (lk201_compose_is_alt, "If set non-zero, LK201' Compose key "
- "will act as an Alt key");
+module_param(lk201_compose_is_alt, int, 0);
+MODULE_PARM_DESC(lk201_compose_is_alt,
+ "If set non-zero, LK201' Compose key will act as an Alt key");
#undef LKKBD_DEBUG
#ifdef LKKBD_DEBUG
-#define DBG(x...) printk (x)
+#define DBG(x...) printk(x)
#else
#define DBG(x...) do {} while (0)
#endif
@@ -122,7 +122,7 @@
#define LK_MODE_DOWN 0x80
#define LK_MODE_AUTODOWN 0x82
#define LK_MODE_UPDOWN 0x86
-#define LK_CMD_SET_MODE(mode,div) ((mode) | ((div) << 3))
+#define LK_CMD_SET_MODE(mode, div) ((mode) | ((div) << 3))
/* Misc commands */
#define LK_CMD_ENABLE_KEYCLICK 0x1b
@@ -152,11 +152,8 @@
#define LK_NUM_KEYCODES 256
#define LK_NUM_IGNORE_BYTES 6
-typedef u_int16_t lk_keycode_t;
-
-
-static lk_keycode_t lkkbd_keycode[LK_NUM_KEYCODES] = {
+static unsigned short lkkbd_keycode[LK_NUM_KEYCODES] = {
[0x56] = KEY_F1,
[0x57] = KEY_F2,
[0x58] = KEY_F3,
@@ -268,7 +265,7 @@
};
#define CHECK_LED(LK, VAR_ON, VAR_OFF, LED, BITS) do { \
- if (test_bit (LED, (LK)->dev->led)) \
+ if (test_bit(LED, (LK)->dev->led)) \
VAR_ON |= BITS; \
else \
VAR_OFF |= BITS; \
@@ -278,7 +275,7 @@
* Per-keyboard data
*/
struct lkkbd {
- lk_keycode_t keycode[LK_NUM_KEYCODES];
+ unsigned short keycode[LK_NUM_KEYCODES];
int ignore_bytes;
unsigned char id[LK_NUM_IGNORE_BYTES];
struct input_dev *dev;
@@ -301,26 +298,25 @@
unsigned char *name;
} lk_response[] = {
#define RESPONSE(x) { .value = (x), .name = #x, }
- RESPONSE (LK_STUCK_KEY),
- RESPONSE (LK_SELFTEST_FAILED),
- RESPONSE (LK_ALL_KEYS_UP),
- RESPONSE (LK_METRONOME),
- RESPONSE (LK_OUTPUT_ERROR),
- RESPONSE (LK_INPUT_ERROR),
- RESPONSE (LK_KBD_LOCKED),
- RESPONSE (LK_KBD_TEST_MODE_ACK),
- RESPONSE (LK_PREFIX_KEY_DOWN),
- RESPONSE (LK_MODE_CHANGE_ACK),
- RESPONSE (LK_RESPONSE_RESERVED),
+ RESPONSE(LK_STUCK_KEY),
+ RESPONSE(LK_SELFTEST_FAILED),
+ RESPONSE(LK_ALL_KEYS_UP),
+ RESPONSE(LK_METRONOME),
+ RESPONSE(LK_OUTPUT_ERROR),
+ RESPONSE(LK_INPUT_ERROR),
+ RESPONSE(LK_KBD_LOCKED),
+ RESPONSE(LK_KBD_TEST_MODE_ACK),
+ RESPONSE(LK_PREFIX_KEY_DOWN),
+ RESPONSE(LK_MODE_CHANGE_ACK),
+ RESPONSE(LK_RESPONSE_RESERVED),
#undef RESPONSE
};
-static unsigned char *
-response_name (unsigned char value)
+static unsigned char *response_name(unsigned char value)
{
int i;
- for (i = 0; i < ARRAY_SIZE (lk_response); i++)
+ for (i = 0; i < ARRAY_SIZE(lk_response); i++)
if (lk_response[i].value == value)
return lk_response[i].name;
@@ -331,8 +327,7 @@
/*
* Calculate volume parameter byte for a given volume.
*/
-static unsigned char
-volume_to_hw (int volume_percent)
+static unsigned char volume_to_hw(int volume_percent)
{
unsigned char ret = 0;
@@ -363,8 +358,7 @@
return ret;
}
-static void
-lkkbd_detection_done (struct lkkbd *lk)
+static void lkkbd_detection_done(struct lkkbd *lk)
{
int i;
@@ -377,190 +371,202 @@
* Print keyboard name and modify Compose=Alt on user's request.
*/
switch (lk->id[4]) {
- case 1:
- strlcpy (lk->name, "DEC LK201 keyboard",
- sizeof (lk->name));
+ case 1:
+ strlcpy(lk->name, "DEC LK201 keyboard", sizeof(lk->name));
- if (lk201_compose_is_alt)
- lk->keycode[0xb1] = KEY_LEFTALT;
- break;
+ if (lk201_compose_is_alt)
+ lk->keycode[0xb1] = KEY_LEFTALT;
+ break;
- case 2:
- strlcpy (lk->name, "DEC LK401 keyboard",
- sizeof (lk->name));
- break;
+ case 2:
+ strlcpy(lk->name, "DEC LK401 keyboard", sizeof(lk->name));
+ break;
- default:
- strlcpy (lk->name, "Unknown DEC keyboard",
- sizeof (lk->name));
- printk (KERN_ERR "lkkbd: keyboard on %s is unknown, "
- "please report to Jan-Benedict Glaw "
- "<jbglaw@lug-owl.de>\n", lk->phys);
- printk (KERN_ERR "lkkbd: keyboard ID'ed as:");
- for (i = 0; i < LK_NUM_IGNORE_BYTES; i++)
- printk (" 0x%02x", lk->id[i]);
- printk ("\n");
- break;
+ default:
+ strlcpy(lk->name, "Unknown DEC keyboard", sizeof(lk->name));
+ printk(KERN_ERR
+ "lkkbd: keyboard on %s is unknown, please report to "
+ "Jan-Benedict Glaw <jbglaw@lug-owl.de>\n", lk->phys);
+ printk(KERN_ERR "lkkbd: keyboard ID'ed as:");
+ for (i = 0; i < LK_NUM_IGNORE_BYTES; i++)
+ printk(" 0x%02x", lk->id[i]);
+ printk("\n");
+ break;
}
- printk (KERN_INFO "lkkbd: keyboard on %s identified as: %s\n",
- lk->phys, lk->name);
+
+ printk(KERN_INFO "lkkbd: keyboard on %s identified as: %s\n",
+ lk->phys, lk->name);
/*
* Report errors during keyboard boot-up.
*/
switch (lk->id[2]) {
- case 0x00:
- /* All okay */
- break;
+ case 0x00:
+ /* All okay */
+ break;
- case LK_STUCK_KEY:
- printk (KERN_ERR "lkkbd: Stuck key on keyboard at "
- "%s\n", lk->phys);
- break;
+ case LK_STUCK_KEY:
+ printk(KERN_ERR "lkkbd: Stuck key on keyboard at %s\n",
+ lk->phys);
+ break;
- case LK_SELFTEST_FAILED:
- printk (KERN_ERR "lkkbd: Selftest failed on keyboard "
- "at %s, keyboard may not work "
- "properly\n", lk->phys);
- break;
+ case LK_SELFTEST_FAILED:
+ printk(KERN_ERR
+ "lkkbd: Selftest failed on keyboard at %s, "
+ "keyboard may not work properly\n", lk->phys);
+ break;
- default:
- printk (KERN_ERR "lkkbd: Unknown error %02x on "
- "keyboard at %s\n", lk->id[2],
- lk->phys);
- break;
+ default:
+ printk(KERN_ERR
+ "lkkbd: Unknown error %02x on keyboard at %s\n",
+ lk->id[2], lk->phys);
+ break;
}
/*
* Try to hint user if there's a stuck key.
*/
if (lk->id[2] == LK_STUCK_KEY && lk->id[3] != 0)
- printk (KERN_ERR "Scancode of stuck key is 0x%02x, keycode "
- "is 0x%04x\n", lk->id[3],
- lk->keycode[lk->id[3]]);
-
- return;
+ printk(KERN_ERR
+ "Scancode of stuck key is 0x%02x, keycode is 0x%04x\n",
+ lk->id[3], lk->keycode[lk->id[3]]);
}
/*
* lkkbd_interrupt() is called by the low level driver when a character
* is received.
*/
-static irqreturn_t
-lkkbd_interrupt (struct serio *serio, unsigned char data, unsigned int flags)
+static irqreturn_t lkkbd_interrupt(struct serio *serio,
+ unsigned char data, unsigned int flags)
{
- struct lkkbd *lk = serio_get_drvdata (serio);
+ struct lkkbd *lk = serio_get_drvdata(serio);
+ struct input_dev *input_dev = lk->dev;
+ unsigned int keycode;
int i;
- DBG (KERN_INFO "Got byte 0x%02x\n", data);
+ DBG(KERN_INFO "Got byte 0x%02x\n", data);
if (lk->ignore_bytes > 0) {
- DBG (KERN_INFO "Ignoring a byte on %s\n", lk->name);
+ DBG(KERN_INFO "Ignoring a byte on %s\n", lk->name);
lk->id[LK_NUM_IGNORE_BYTES - lk->ignore_bytes--] = data;
if (lk->ignore_bytes == 0)
- lkkbd_detection_done (lk);
+ lkkbd_detection_done(lk);
return IRQ_HANDLED;
}
switch (data) {
- case LK_ALL_KEYS_UP:
- for (i = 0; i < ARRAY_SIZE (lkkbd_keycode); i++)
- if (lk->keycode[i] != KEY_RESERVED)
- input_report_key (lk->dev, lk->keycode[i], 0);
- input_sync (lk->dev);
- break;
+ case LK_ALL_KEYS_UP:
+ for (i = 0; i < ARRAY_SIZE(lkkbd_keycode); i++)
+ input_report_key(input_dev, lk->keycode[i], 0);
+ input_sync(input_dev);
+ break;
- case 0x01:
- DBG (KERN_INFO "Got 0x01, scheduling re-initialization\n");
- lk->ignore_bytes = LK_NUM_IGNORE_BYTES;
- lk->id[LK_NUM_IGNORE_BYTES - lk->ignore_bytes--] = data;
- schedule_work (&lk->tq);
- break;
+ case 0x01:
+ DBG(KERN_INFO "Got 0x01, scheduling re-initialization\n");
+ lk->ignore_bytes = LK_NUM_IGNORE_BYTES;
+ lk->id[LK_NUM_IGNORE_BYTES - lk->ignore_bytes--] = data;
+ schedule_work(&lk->tq);
+ break;
- case LK_METRONOME:
- case LK_OUTPUT_ERROR:
- case LK_INPUT_ERROR:
- case LK_KBD_LOCKED:
- case LK_KBD_TEST_MODE_ACK:
- case LK_PREFIX_KEY_DOWN:
- case LK_MODE_CHANGE_ACK:
- case LK_RESPONSE_RESERVED:
- DBG (KERN_INFO "Got %s and don't know how to handle...\n",
- response_name (data));
- break;
+ case LK_METRONOME:
+ case LK_OUTPUT_ERROR:
+ case LK_INPUT_ERROR:
+ case LK_KBD_LOCKED:
+ case LK_KBD_TEST_MODE_ACK:
+ case LK_PREFIX_KEY_DOWN:
+ case LK_MODE_CHANGE_ACK:
+ case LK_RESPONSE_RESERVED:
+ DBG(KERN_INFO "Got %s and don't know how to handle...\n",
+ response_name(data));
+ break;
- default:
- if (lk->keycode[data] != KEY_RESERVED) {
- if (!test_bit (lk->keycode[data], lk->dev->key))
- input_report_key (lk->dev, lk->keycode[data], 1);
- else
- input_report_key (lk->dev, lk->keycode[data], 0);
- input_sync (lk->dev);
- } else
- printk (KERN_WARNING "%s: Unknown key with "
- "scancode 0x%02x on %s.\n",
- __FILE__, data, lk->name);
+ default:
+ keycode = lk->keycode[data];
+ if (keycode != KEY_RESERVED) {
+ input_report_key(input_dev, keycode,
+ !test_bit(keycode, input_dev->key));
+ input_sync(input_dev);
+ } else {
+ printk(KERN_WARNING
+ "%s: Unknown key with scancode 0x%02x on %s.\n",
+ __FILE__, data, lk->name);
+ }
}
return IRQ_HANDLED;
}
-/*
- * lkkbd_event() handles events from the input module.
- */
-static int
-lkkbd_event (struct input_dev *dev, unsigned int type, unsigned int code,
- int value)
+static void lkkbd_toggle_leds(struct lkkbd *lk)
{
- struct lkkbd *lk = input_get_drvdata (dev);
+ struct serio *serio = lk->serio;
unsigned char leds_on = 0;
unsigned char leds_off = 0;
+ CHECK_LED(lk, leds_on, leds_off, LED_CAPSL, LK_LED_SHIFTLOCK);
+ CHECK_LED(lk, leds_on, leds_off, LED_COMPOSE, LK_LED_COMPOSE);
+ CHECK_LED(lk, leds_on, leds_off, LED_SCROLLL, LK_LED_SCROLLLOCK);
+ CHECK_LED(lk, leds_on, leds_off, LED_SLEEP, LK_LED_WAIT);
+ if (leds_on != 0) {
+ serio_write(serio, LK_CMD_LED_ON);
+ serio_write(serio, leds_on);
+ }
+ if (leds_off != 0) {
+ serio_write(serio, LK_CMD_LED_OFF);
+ serio_write(serio, leds_off);
+ }
+}
+
+static void lkkbd_toggle_keyclick(struct lkkbd *lk, bool on)
+{
+ struct serio *serio = lk->serio;
+
+ if (on) {
+ DBG("%s: Activating key clicks\n", __func__);
+ serio_write(serio, LK_CMD_ENABLE_KEYCLICK);
+ serio_write(serio, volume_to_hw(lk->keyclick_volume));
+ serio_write(serio, LK_CMD_ENABLE_CTRCLICK);
+ serio_write(serio, volume_to_hw(lk->ctrlclick_volume));
+ } else {
+ DBG("%s: Deactivating key clicks\n", __func__);
+ serio_write(serio, LK_CMD_DISABLE_KEYCLICK);
+ serio_write(serio, LK_CMD_DISABLE_CTRCLICK);
+ }
+
+}
+
+/*
+ * lkkbd_event() handles events from the input module.
+ */
+static int lkkbd_event(struct input_dev *dev,
+ unsigned int type, unsigned int code, int value)
+{
+ struct lkkbd *lk = input_get_drvdata(dev);
+
switch (type) {
- case EV_LED:
- CHECK_LED (lk, leds_on, leds_off, LED_CAPSL, LK_LED_SHIFTLOCK);
- CHECK_LED (lk, leds_on, leds_off, LED_COMPOSE, LK_LED_COMPOSE);
- CHECK_LED (lk, leds_on, leds_off, LED_SCROLLL, LK_LED_SCROLLLOCK);
- CHECK_LED (lk, leds_on, leds_off, LED_SLEEP, LK_LED_WAIT);
- if (leds_on != 0) {
- serio_write (lk->serio, LK_CMD_LED_ON);
- serio_write (lk->serio, leds_on);
- }
- if (leds_off != 0) {
- serio_write (lk->serio, LK_CMD_LED_OFF);
- serio_write (lk->serio, leds_off);
- }
+ case EV_LED:
+ lkkbd_toggle_leds(lk);
+ return 0;
+
+ case EV_SND:
+ switch (code) {
+ case SND_CLICK:
+ lkkbd_toggle_keyclick(lk, value);
return 0;
- case EV_SND:
- switch (code) {
- case SND_CLICK:
- if (value == 0) {
- DBG ("%s: Deactivating key clicks\n", __func__);
- serio_write (lk->serio, LK_CMD_DISABLE_KEYCLICK);
- serio_write (lk->serio, LK_CMD_DISABLE_CTRCLICK);
- } else {
- DBG ("%s: Activating key clicks\n", __func__);
- serio_write (lk->serio, LK_CMD_ENABLE_KEYCLICK);
- serio_write (lk->serio, volume_to_hw (lk->keyclick_volume));
- serio_write (lk->serio, LK_CMD_ENABLE_CTRCLICK);
- serio_write (lk->serio, volume_to_hw (lk->ctrlclick_volume));
- }
- return 0;
+ case SND_BELL:
+ if (value != 0)
+ serio_write(lk->serio, LK_CMD_SOUND_BELL);
- case SND_BELL:
- if (value != 0)
- serio_write (lk->serio, LK_CMD_SOUND_BELL);
+ return 0;
+ }
- return 0;
- }
- break;
+ break;
- default:
- printk (KERN_ERR "%s (): Got unknown type %d, code %d, value %d\n",
- __func__, type, code, value);
+ default:
+ printk(KERN_ERR "%s(): Got unknown type %d, code %d, value %d\n",
+ __func__, type, code, value);
}
return -1;
@@ -570,79 +576,56 @@
* lkkbd_reinit() sets leds and beeps to a state the computer remembers they
* were in.
*/
-static void
-lkkbd_reinit (struct work_struct *work)
+static void lkkbd_reinit(struct work_struct *work)
{
struct lkkbd *lk = container_of(work, struct lkkbd, tq);
int division;
- unsigned char leds_on = 0;
- unsigned char leds_off = 0;
/* Ask for ID */
- serio_write (lk->serio, LK_CMD_REQUEST_ID);
+ serio_write(lk->serio, LK_CMD_REQUEST_ID);
/* Reset parameters */
- serio_write (lk->serio, LK_CMD_SET_DEFAULTS);
+ serio_write(lk->serio, LK_CMD_SET_DEFAULTS);
/* Set LEDs */
- CHECK_LED (lk, leds_on, leds_off, LED_CAPSL, LK_LED_SHIFTLOCK);
- CHECK_LED (lk, leds_on, leds_off, LED_COMPOSE, LK_LED_COMPOSE);
- CHECK_LED (lk, leds_on, leds_off, LED_SCROLLL, LK_LED_SCROLLLOCK);
- CHECK_LED (lk, leds_on, leds_off, LED_SLEEP, LK_LED_WAIT);
- if (leds_on != 0) {
- serio_write (lk->serio, LK_CMD_LED_ON);
- serio_write (lk->serio, leds_on);
- }
- if (leds_off != 0) {
- serio_write (lk->serio, LK_CMD_LED_OFF);
- serio_write (lk->serio, leds_off);
- }
+ lkkbd_toggle_leds(lk);
/*
* Try to activate extended LK401 mode. This command will
* only work with a LK401 keyboard and grants access to
* LAlt, RAlt, RCompose and RShift.
*/
- serio_write (lk->serio, LK_CMD_ENABLE_LK401);
+ serio_write(lk->serio, LK_CMD_ENABLE_LK401);
/* Set all keys to UPDOWN mode */
for (division = 1; division <= 14; division++)
- serio_write (lk->serio, LK_CMD_SET_MODE (LK_MODE_UPDOWN,
- division));
+ serio_write(lk->serio,
+ LK_CMD_SET_MODE(LK_MODE_UPDOWN, division));
/* Enable bell and set volume */
- serio_write (lk->serio, LK_CMD_ENABLE_BELL);
- serio_write (lk->serio, volume_to_hw (lk->bell_volume));
+ serio_write(lk->serio, LK_CMD_ENABLE_BELL);
+ serio_write(lk->serio, volume_to_hw(lk->bell_volume));
/* Enable/disable keyclick (and possibly set volume) */
- if (test_bit (SND_CLICK, lk->dev->snd)) {
- serio_write (lk->serio, LK_CMD_ENABLE_KEYCLICK);
- serio_write (lk->serio, volume_to_hw (lk->keyclick_volume));
- serio_write (lk->serio, LK_CMD_ENABLE_CTRCLICK);
- serio_write (lk->serio, volume_to_hw (lk->ctrlclick_volume));
- } else {
- serio_write (lk->serio, LK_CMD_DISABLE_KEYCLICK);
- serio_write (lk->serio, LK_CMD_DISABLE_CTRCLICK);
- }
+ lkkbd_toggle_keyclick(lk, test_bit(SND_CLICK, lk->dev->snd));
/* Sound the bell if needed */
- if (test_bit (SND_BELL, lk->dev->snd))
- serio_write (lk->serio, LK_CMD_SOUND_BELL);
+ if (test_bit(SND_BELL, lk->dev->snd))
+ serio_write(lk->serio, LK_CMD_SOUND_BELL);
}
/*
* lkkbd_connect() probes for a LK keyboard and fills the necessary structures.
*/
-static int
-lkkbd_connect (struct serio *serio, struct serio_driver *drv)
+static int lkkbd_connect(struct serio *serio, struct serio_driver *drv)
{
struct lkkbd *lk;
struct input_dev *input_dev;
int i;
int err;
- lk = kzalloc (sizeof (struct lkkbd), GFP_KERNEL);
- input_dev = input_allocate_device ();
+ lk = kzalloc(sizeof(struct lkkbd), GFP_KERNEL);
+ input_dev = input_allocate_device();
if (!lk || !input_dev) {
err = -ENOMEM;
goto fail1;
@@ -650,14 +633,14 @@
lk->serio = serio;
lk->dev = input_dev;
- INIT_WORK (&lk->tq, lkkbd_reinit);
+ INIT_WORK(&lk->tq, lkkbd_reinit);
lk->bell_volume = bell_volume;
lk->keyclick_volume = keyclick_volume;
lk->ctrlclick_volume = ctrlclick_volume;
- memcpy (lk->keycode, lkkbd_keycode, sizeof (lk_keycode_t) * LK_NUM_KEYCODES);
+ memcpy(lk->keycode, lkkbd_keycode, sizeof(lk->keycode));
- strlcpy (lk->name, "DEC LK keyboard", sizeof(lk->name));
- snprintf (lk->phys, sizeof(lk->phys), "%s/input0", serio->phys);
+ strlcpy(lk->name, "DEC LK keyboard", sizeof(lk->name));
+ snprintf(lk->phys, sizeof(lk->phys), "%s/input0", serio->phys);
input_dev->name = lk->name;
input_dev->phys = lk->phys;
@@ -668,62 +651,61 @@
input_dev->dev.parent = &serio->dev;
input_dev->event = lkkbd_event;
- input_set_drvdata (input_dev, lk);
+ input_set_drvdata(input_dev, lk);
- set_bit (EV_KEY, input_dev->evbit);
- set_bit (EV_LED, input_dev->evbit);
- set_bit (EV_SND, input_dev->evbit);
- set_bit (EV_REP, input_dev->evbit);
- set_bit (LED_CAPSL, input_dev->ledbit);
- set_bit (LED_SLEEP, input_dev->ledbit);
- set_bit (LED_COMPOSE, input_dev->ledbit);
- set_bit (LED_SCROLLL, input_dev->ledbit);
- set_bit (SND_BELL, input_dev->sndbit);
- set_bit (SND_CLICK, input_dev->sndbit);
+ __set_bit(EV_KEY, input_dev->evbit);
+ __set_bit(EV_LED, input_dev->evbit);
+ __set_bit(EV_SND, input_dev->evbit);
+ __set_bit(EV_REP, input_dev->evbit);
+ __set_bit(LED_CAPSL, input_dev->ledbit);
+ __set_bit(LED_SLEEP, input_dev->ledbit);
+ __set_bit(LED_COMPOSE, input_dev->ledbit);
+ __set_bit(LED_SCROLLL, input_dev->ledbit);
+ __set_bit(SND_BELL, input_dev->sndbit);
+ __set_bit(SND_CLICK, input_dev->sndbit);
input_dev->keycode = lk->keycode;
- input_dev->keycodesize = sizeof (lk_keycode_t);
- input_dev->keycodemax = LK_NUM_KEYCODES;
+ input_dev->keycodesize = sizeof(lk->keycode[0]);
+ input_dev->keycodemax = ARRAY_SIZE(lk->keycode);
for (i = 0; i < LK_NUM_KEYCODES; i++)
- __set_bit (lk->keycode[i], input_dev->keybit);
+ __set_bit(lk->keycode[i], input_dev->keybit);
__clear_bit(KEY_RESERVED, input_dev->keybit);
- serio_set_drvdata (serio, lk);
+ serio_set_drvdata(serio, lk);
- err = serio_open (serio, drv);
+ err = serio_open(serio, drv);
if (err)
goto fail2;
- err = input_register_device (lk->dev);
+ err = input_register_device(lk->dev);
if (err)
goto fail3;
- serio_write (lk->serio, LK_CMD_POWERCYCLE_RESET);
+ serio_write(lk->serio, LK_CMD_POWERCYCLE_RESET);
return 0;
- fail3: serio_close (serio);
- fail2: serio_set_drvdata (serio, NULL);
- fail1: input_free_device (input_dev);
- kfree (lk);
+ fail3: serio_close(serio);
+ fail2: serio_set_drvdata(serio, NULL);
+ fail1: input_free_device(input_dev);
+ kfree(lk);
return err;
}
/*
* lkkbd_disconnect() unregisters and closes behind us.
*/
-static void
-lkkbd_disconnect (struct serio *serio)
+static void lkkbd_disconnect(struct serio *serio)
{
- struct lkkbd *lk = serio_get_drvdata (serio);
+ struct lkkbd *lk = serio_get_drvdata(serio);
- input_get_device (lk->dev);
- input_unregister_device (lk->dev);
- serio_close (serio);
- serio_set_drvdata (serio, NULL);
- input_put_device (lk->dev);
- kfree (lk);
+ input_get_device(lk->dev);
+ input_unregister_device(lk->dev);
+ serio_close(serio);
+ serio_set_drvdata(serio, NULL);
+ input_put_device(lk->dev);
+ kfree(lk);
}
static struct serio_device_id lkkbd_serio_ids[] = {
@@ -752,18 +734,16 @@
/*
* The functions for insering/removing us as a module.
*/
-static int __init
-lkkbd_init (void)
+static int __init lkkbd_init(void)
{
return serio_register_driver(&lkkbd_drv);
}
-static void __exit
-lkkbd_exit (void)
+static void __exit lkkbd_exit(void)
{
serio_unregister_driver(&lkkbd_drv);
}
-module_init (lkkbd_init);
-module_exit (lkkbd_exit);
+module_init(lkkbd_init);
+module_exit(lkkbd_exit);
diff --git a/drivers/input/keyboard/matrix_keypad.c b/drivers/input/keyboard/matrix_keypad.c
index 91cfe51..34f4a29 100644
--- a/drivers/input/keyboard/matrix_keypad.c
+++ b/drivers/input/keyboard/matrix_keypad.c
@@ -213,8 +213,9 @@
}
#ifdef CONFIG_PM
-static int matrix_keypad_suspend(struct platform_device *pdev, pm_message_t state)
+static int matrix_keypad_suspend(struct device *dev)
{
+ struct platform_device *pdev = to_platform_device(dev);
struct matrix_keypad *keypad = platform_get_drvdata(pdev);
const struct matrix_keypad_platform_data *pdata = keypad->pdata;
int i;
@@ -228,8 +229,9 @@
return 0;
}
-static int matrix_keypad_resume(struct platform_device *pdev)
+static int matrix_keypad_resume(struct device *dev)
{
+ struct platform_device *pdev = to_platform_device(dev);
struct matrix_keypad *keypad = platform_get_drvdata(pdev);
const struct matrix_keypad_platform_data *pdata = keypad->pdata;
int i;
@@ -242,9 +244,9 @@
return 0;
}
-#else
-#define matrix_keypad_suspend NULL
-#define matrix_keypad_resume NULL
+
+static const SIMPLE_DEV_PM_OPS(matrix_keypad_pm_ops,
+ matrix_keypad_suspend, matrix_keypad_resume);
#endif
static int __devinit init_matrix_gpio(struct platform_device *pdev,
@@ -417,11 +419,12 @@
static struct platform_driver matrix_keypad_driver = {
.probe = matrix_keypad_probe,
.remove = __devexit_p(matrix_keypad_remove),
- .suspend = matrix_keypad_suspend,
- .resume = matrix_keypad_resume,
.driver = {
.name = "matrix-keypad",
.owner = THIS_MODULE,
+#ifdef CONFIG_PM
+ .pm = &matrix_keypad_pm_ops,
+#endif
},
};
diff --git a/drivers/input/keyboard/sh_keysc.c b/drivers/input/keyboard/sh_keysc.c
index 887af79..076111f 100644
--- a/drivers/input/keyboard/sh_keysc.c
+++ b/drivers/input/keyboard/sh_keysc.c
@@ -18,9 +18,9 @@
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/input.h>
+#include <linux/input/sh_keysc.h>
#include <linux/clk.h>
#include <linux/io.h>
-#include <asm/sh_keysc.h>
#define KYCR1_OFFS 0x00
#define KYCR2_OFFS 0x04
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index a9bb254..16ec523 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -80,6 +80,7 @@
tristate "x86 Wistron laptop button interface"
depends on X86 && !X86_64
select INPUT_POLLDEV
+ select INPUT_SPARSEKMAP
select NEW_LEDS
select LEDS_CLASS
select CHECK_SIGNATURE
@@ -281,6 +282,7 @@
config INPUT_DM355EVM
tristate "TI DaVinci DM355 EVM Keypad and IR Remote"
depends on MFD_DM355EVM_MSP
+ select INPUT_SPARSEKMAP
help
Supports the pushbuttons and IR remote used with
the DM355 EVM board.
diff --git a/drivers/input/misc/ati_remote.c b/drivers/input/misc/ati_remote.c
index e290fde..614b65d 100644
--- a/drivers/input/misc/ati_remote.c
+++ b/drivers/input/misc/ati_remote.c
@@ -766,7 +766,7 @@
ati_remote->interface = interface;
usb_make_path(udev, ati_remote->phys, sizeof(ati_remote->phys));
- strlcpy(ati_remote->phys, "/input0", sizeof(ati_remote->phys));
+ strlcat(ati_remote->phys, "/input0", sizeof(ati_remote->phys));
if (udev->manufacturer)
strlcpy(ati_remote->name, udev->manufacturer, sizeof(ati_remote->name));
diff --git a/drivers/input/misc/dm355evm_keys.c b/drivers/input/misc/dm355evm_keys.c
index f2b67dc..766c069 100644
--- a/drivers/input/misc/dm355evm_keys.c
+++ b/drivers/input/misc/dm355evm_keys.c
@@ -11,6 +11,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/input.h>
+#include <linux/input/sparse-keymap.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
@@ -33,12 +34,8 @@
int irq;
};
-/* These initial keycodes can be remapped by dm355evm_setkeycode(). */
-static struct {
- u16 event;
- u16 keycode;
-} dm355evm_keys[] = {
-
+/* These initial keycodes can be remapped */
+static const struct key_entry dm355evm_keys[] = {
/*
* Pushbuttons on the EVM board ... note that the labels for these
* are SW10/SW11/etc on the PC board. The left/right orientation
@@ -47,11 +44,11 @@
* is to the right. (That is, rotate the board counter-clockwise
* by 90 degrees from the SW10/etc and "DM355 EVM" labels.)
*/
- { 0x00d8, KEY_OK, }, /* SW12 */
- { 0x00b8, KEY_UP, }, /* SW13 */
- { 0x00e8, KEY_DOWN, }, /* SW11 */
- { 0x0078, KEY_LEFT, }, /* SW14 */
- { 0x00f0, KEY_RIGHT, }, /* SW10 */
+ { KE_KEY, 0x00d8, { KEY_OK } }, /* SW12 */
+ { KE_KEY, 0x00b8, { KEY_UP } }, /* SW13 */
+ { KE_KEY, 0x00e8, { KEY_DOWN } }, /* SW11 */
+ { KE_KEY, 0x0078, { KEY_LEFT } }, /* SW14 */
+ { KE_KEY, 0x00f0, { KEY_RIGHT } }, /* SW10 */
/*
* IR buttons ... codes assigned to match the universal remote
@@ -65,35 +62,35 @@
* RC5 codes are 14 bits, with two start bits (0x3 prefix)
* and a toggle bit (masked out below).
*/
- { 0x300c, KEY_POWER, }, /* NOTE: docs omit this */
- { 0x3000, KEY_NUMERIC_0, },
- { 0x3001, KEY_NUMERIC_1, },
- { 0x3002, KEY_NUMERIC_2, },
- { 0x3003, KEY_NUMERIC_3, },
- { 0x3004, KEY_NUMERIC_4, },
- { 0x3005, KEY_NUMERIC_5, },
- { 0x3006, KEY_NUMERIC_6, },
- { 0x3007, KEY_NUMERIC_7, },
- { 0x3008, KEY_NUMERIC_8, },
- { 0x3009, KEY_NUMERIC_9, },
- { 0x3022, KEY_ENTER, },
- { 0x30ec, KEY_MODE, }, /* "tv/vcr/..." */
- { 0x300f, KEY_SELECT, }, /* "info" */
- { 0x3020, KEY_CHANNELUP, }, /* "up" */
- { 0x302e, KEY_MENU, }, /* "in/out" */
- { 0x3011, KEY_VOLUMEDOWN, }, /* "left" */
- { 0x300d, KEY_MUTE, }, /* "ok" */
- { 0x3010, KEY_VOLUMEUP, }, /* "right" */
- { 0x301e, KEY_SUBTITLE, }, /* "cc" */
- { 0x3021, KEY_CHANNELDOWN, }, /* "down" */
- { 0x3022, KEY_PREVIOUS, },
- { 0x3026, KEY_SLEEP, },
- { 0x3172, KEY_REWIND, }, /* NOTE: docs wrongly say 0x30ca */
- { 0x3175, KEY_PLAY, },
- { 0x3174, KEY_FASTFORWARD, },
- { 0x3177, KEY_RECORD, },
- { 0x3176, KEY_STOP, },
- { 0x3169, KEY_PAUSE, },
+ { KE_KEY, 0x300c, { KEY_POWER } }, /* NOTE: docs omit this */
+ { KE_KEY, 0x3000, { KEY_NUMERIC_0 } },
+ { KE_KEY, 0x3001, { KEY_NUMERIC_1 } },
+ { KE_KEY, 0x3002, { KEY_NUMERIC_2 } },
+ { KE_KEY, 0x3003, { KEY_NUMERIC_3 } },
+ { KE_KEY, 0x3004, { KEY_NUMERIC_4 } },
+ { KE_KEY, 0x3005, { KEY_NUMERIC_5 } },
+ { KE_KEY, 0x3006, { KEY_NUMERIC_6 } },
+ { KE_KEY, 0x3007, { KEY_NUMERIC_7 } },
+ { KE_KEY, 0x3008, { KEY_NUMERIC_8 } },
+ { KE_KEY, 0x3009, { KEY_NUMERIC_9 } },
+ { KE_KEY, 0x3022, { KEY_ENTER } },
+ { KE_KEY, 0x30ec, { KEY_MODE } }, /* "tv/vcr/..." */
+ { KE_KEY, 0x300f, { KEY_SELECT } }, /* "info" */
+ { KE_KEY, 0x3020, { KEY_CHANNELUP } }, /* "up" */
+ { KE_KEY, 0x302e, { KEY_MENU } }, /* "in/out" */
+ { KE_KEY, 0x3011, { KEY_VOLUMEDOWN } }, /* "left" */
+ { KE_KEY, 0x300d, { KEY_MUTE } }, /* "ok" */
+ { KE_KEY, 0x3010, { KEY_VOLUMEUP } }, /* "right" */
+ { KE_KEY, 0x301e, { KEY_SUBTITLE } }, /* "cc" */
+ { KE_KEY, 0x3021, { KEY_CHANNELDOWN } },/* "down" */
+ { KE_KEY, 0x3022, { KEY_PREVIOUS } },
+ { KE_KEY, 0x3026, { KEY_SLEEP } },
+ { KE_KEY, 0x3172, { KEY_REWIND } }, /* NOTE: docs wrongly say 0x30ca */
+ { KE_KEY, 0x3175, { KEY_PLAY } },
+ { KE_KEY, 0x3174, { KEY_FASTFORWARD } },
+ { KE_KEY, 0x3177, { KEY_RECORD } },
+ { KE_KEY, 0x3176, { KEY_STOP } },
+ { KE_KEY, 0x3169, { KEY_PAUSE } },
};
/*
@@ -105,19 +102,18 @@
*/
static irqreturn_t dm355evm_keys_irq(int irq, void *_keys)
{
- struct dm355evm_keys *keys = _keys;
- int status;
+ static u16 last_event;
+ struct dm355evm_keys *keys = _keys;
+ const struct key_entry *ke;
+ unsigned int keycode;
+ int status;
+ u16 event;
/* For simplicity we ignore INPUT_COUNT and just read
* events until we get the "queue empty" indicator.
* Reading INPUT_LOW decrements the count.
*/
for (;;) {
- static u16 last_event;
- u16 event;
- int keycode;
- int i;
-
status = dm355evm_msp_read(DM355EVM_MSP_INPUT_HIGH);
if (status < 0) {
dev_dbg(keys->dev, "input high err %d\n",
@@ -156,14 +152,9 @@
/* ignore the RC5 toggle bit */
event &= ~0x0800;
- /* find the key, or leave it as unknown */
- keycode = KEY_UNKNOWN;
- for (i = 0; i < ARRAY_SIZE(dm355evm_keys); i++) {
- if (dm355evm_keys[i].event != event)
- continue;
- keycode = dm355evm_keys[i].keycode;
- break;
- }
+ /* find the key, or report it as unknown */
+ ke = sparse_keymap_entry_from_scancode(keys->input, event);
+ keycode = ke ? ke->keycode : KEY_UNKNOWN;
dev_dbg(keys->dev,
"input event 0x%04x--> keycode %d\n",
event, keycode);
@@ -174,38 +165,10 @@
input_report_key(keys->input, keycode, 0);
input_sync(keys->input);
}
+
return IRQ_HANDLED;
}
-static int dm355evm_setkeycode(struct input_dev *dev, int index, int keycode)
-{
- u16 old_keycode;
- unsigned i;
-
- if (((unsigned)index) >= ARRAY_SIZE(dm355evm_keys))
- return -EINVAL;
-
- old_keycode = dm355evm_keys[index].keycode;
- dm355evm_keys[index].keycode = keycode;
- set_bit(keycode, dev->keybit);
-
- for (i = 0; i < ARRAY_SIZE(dm355evm_keys); i++) {
- if (dm355evm_keys[index].keycode == old_keycode)
- goto done;
- }
- clear_bit(old_keycode, dev->keybit);
-done:
- return 0;
-}
-
-static int dm355evm_getkeycode(struct input_dev *dev, int index, int *keycode)
-{
- if (((unsigned)index) >= ARRAY_SIZE(dm355evm_keys))
- return -EINVAL;
-
- return dm355evm_keys[index].keycode;
-}
-
/*----------------------------------------------------------------------*/
static int __devinit dm355evm_keys_probe(struct platform_device *pdev)
@@ -213,7 +176,6 @@
struct dm355evm_keys *keys;
struct input_dev *input;
int status;
- int i;
/* allocate instance struct and input dev */
keys = kzalloc(sizeof *keys, GFP_KERNEL);
@@ -242,31 +204,30 @@
input->id.product = 0x0355;
input->id.version = dm355evm_msp_read(DM355EVM_MSP_FIRMREV);
- input->evbit[0] = BIT(EV_KEY);
- for (i = 0; i < ARRAY_SIZE(dm355evm_keys); i++)
- __set_bit(dm355evm_keys[i].keycode, input->keybit);
-
- input->setkeycode = dm355evm_setkeycode;
- input->getkeycode = dm355evm_getkeycode;
+ status = sparse_keymap_setup(input, dm355evm_keys, NULL);
+ if (status)
+ goto fail1;
/* REVISIT: flush the event queue? */
status = request_threaded_irq(keys->irq, NULL, dm355evm_keys_irq,
IRQF_TRIGGER_FALLING, dev_name(&pdev->dev), keys);
if (status < 0)
- goto fail1;
+ goto fail2;
/* register */
status = input_register_device(input);
if (status < 0)
- goto fail2;
+ goto fail3;
platform_set_drvdata(pdev, keys);
return 0;
-fail2:
+fail3:
free_irq(keys->irq, keys);
+fail2:
+ sparse_keymap_free(input);
fail1:
input_free_device(input);
kfree(keys);
@@ -280,6 +241,7 @@
struct dm355evm_keys *keys = platform_get_drvdata(pdev);
free_irq(keys->irq, keys);
+ sparse_keymap_free(keys->input);
input_unregister_device(keys->input);
kfree(keys);
diff --git a/drivers/input/misc/hp_sdc_rtc.c b/drivers/input/misc/hp_sdc_rtc.c
index ea821b5..ad730e1 100644
--- a/drivers/input/misc/hp_sdc_rtc.c
+++ b/drivers/input/misc/hp_sdc_rtc.c
@@ -35,7 +35,6 @@
#include <linux/hp_sdc.h>
#include <linux/errno.h>
-#include <linux/smp_lock.h>
#include <linux/types.h>
#include <linux/init.h>
#include <linux/module.h>
@@ -409,7 +408,6 @@
static int hp_sdc_rtc_open(struct inode *inode, struct file *file)
{
- cycle_kernel_lock();
return 0;
}
diff --git a/drivers/input/misc/powermate.c b/drivers/input/misc/powermate.c
index a53c488..668913d 100644
--- a/drivers/input/misc/powermate.c
+++ b/drivers/input/misc/powermate.c
@@ -338,7 +338,7 @@
pm->input = input_dev;
usb_make_path(udev, pm->phys, sizeof(pm->phys));
- strlcpy(pm->phys, "/input0", sizeof(pm->phys));
+ strlcat(pm->phys, "/input0", sizeof(pm->phys));
spin_lock_init(&pm->lock);
diff --git a/drivers/input/misc/wistron_btns.c b/drivers/input/misc/wistron_btns.c
index a932179..38da6ab 100644
--- a/drivers/input/misc/wistron_btns.c
+++ b/drivers/input/misc/wistron_btns.c
@@ -21,6 +21,7 @@
#include <linux/dmi.h>
#include <linux/init.h>
#include <linux/input-polldev.h>
+#include <linux/input/sparse-keymap.h>
#include <linux/interrupt.h>
#include <linux/jiffies.h>
#include <linux/kernel.h>
@@ -224,19 +225,8 @@
/* Hardware database */
-struct key_entry {
- char type; /* See KE_* below */
- u8 code;
- union {
- u16 keycode; /* For KE_KEY */
- struct { /* For KE_SW */
- u8 code;
- u8 value;
- } sw;
- };
-};
-
-enum { KE_END, KE_KEY, KE_SW, KE_WIFI, KE_BLUETOOTH };
+#define KE_WIFI (KE_LAST + 1)
+#define KE_BLUETOOTH (KE_LAST + 2)
#define FE_MAIL_LED 0x01
#define FE_WIFI_LED 0x02
@@ -644,10 +634,10 @@
* a list of buttons and their key codes (reported when loading this module
* with force=1) and the output of dmidecode to $MODULE_AUTHOR.
*/
-static struct dmi_system_id dmi_ids[] __initdata = {
+static const struct dmi_system_id __initconst dmi_ids[] = {
{
+ /* Fujitsu-Siemens Amilo Pro V2000 */
.callback = dmi_matched,
- .ident = "Fujitsu-Siemens Amilo Pro V2000",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pro V2000"),
@@ -655,8 +645,8 @@
.driver_data = keymap_fs_amilo_pro_v2000
},
{
+ /* Fujitsu-Siemens Amilo Pro Edition V3505 */
.callback = dmi_matched,
- .ident = "Fujitsu-Siemens Amilo Pro Edition V3505",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pro Edition V3505"),
@@ -664,8 +654,8 @@
.driver_data = keymap_fs_amilo_pro_v3505
},
{
+ /* Fujitsu-Siemens Amilo M7400 */
.callback = dmi_matched,
- .ident = "Fujitsu-Siemens Amilo M7400",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
DMI_MATCH(DMI_PRODUCT_NAME, "AMILO M "),
@@ -673,8 +663,8 @@
.driver_data = keymap_fs_amilo_pro_v2000
},
{
+ /* Maxdata Pro 7000 DX */
.callback = dmi_matched,
- .ident = "Maxdata Pro 7000 DX",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "MAXDATA"),
DMI_MATCH(DMI_PRODUCT_NAME, "Pro 7000"),
@@ -682,8 +672,8 @@
.driver_data = keymap_fs_amilo_pro_v2000
},
{
+ /* Fujitsu N3510 */
.callback = dmi_matched,
- .ident = "Fujitsu N3510",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
DMI_MATCH(DMI_PRODUCT_NAME, "N3510"),
@@ -691,8 +681,8 @@
.driver_data = keymap_fujitsu_n3510
},
{
+ /* Acer Aspire 1500 */
.callback = dmi_matched,
- .ident = "Acer Aspire 1500",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 1500"),
@@ -700,8 +690,8 @@
.driver_data = keymap_acer_aspire_1500
},
{
+ /* Acer Aspire 1600 */
.callback = dmi_matched,
- .ident = "Acer Aspire 1600",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 1600"),
@@ -709,8 +699,8 @@
.driver_data = keymap_acer_aspire_1600
},
{
+ /* Acer Aspire 3020 */
.callback = dmi_matched,
- .ident = "Acer Aspire 3020",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 3020"),
@@ -718,8 +708,8 @@
.driver_data = keymap_acer_aspire_5020
},
{
+ /* Acer Aspire 5020 */
.callback = dmi_matched,
- .ident = "Acer Aspire 5020",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5020"),
@@ -727,8 +717,8 @@
.driver_data = keymap_acer_aspire_5020
},
{
+ /* Acer TravelMate 2100 */
.callback = dmi_matched,
- .ident = "Acer TravelMate 2100",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 2100"),
@@ -736,8 +726,8 @@
.driver_data = keymap_acer_aspire_5020
},
{
+ /* Acer TravelMate 2410 */
.callback = dmi_matched,
- .ident = "Acer TravelMate 2410",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 2410"),
@@ -745,8 +735,8 @@
.driver_data = keymap_acer_travelmate_2410
},
{
+ /* Acer TravelMate C300 */
.callback = dmi_matched,
- .ident = "Acer TravelMate C300",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate C300"),
@@ -754,8 +744,8 @@
.driver_data = keymap_acer_travelmate_300
},
{
+ /* Acer TravelMate C100 */
.callback = dmi_matched,
- .ident = "Acer TravelMate C100",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate C100"),
@@ -763,8 +753,8 @@
.driver_data = keymap_acer_travelmate_300
},
{
+ /* Acer TravelMate C110 */
.callback = dmi_matched,
- .ident = "Acer TravelMate C110",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate C110"),
@@ -772,8 +762,8 @@
.driver_data = keymap_acer_travelmate_110
},
{
+ /* Acer TravelMate 380 */
.callback = dmi_matched,
- .ident = "Acer TravelMate 380",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 380"),
@@ -781,8 +771,8 @@
.driver_data = keymap_acer_travelmate_380
},
{
+ /* Acer TravelMate 370 */
.callback = dmi_matched,
- .ident = "Acer TravelMate 370",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 370"),
@@ -790,8 +780,8 @@
.driver_data = keymap_acer_travelmate_380 /* keyboard minus 1 key */
},
{
+ /* Acer TravelMate 220 */
.callback = dmi_matched,
- .ident = "Acer TravelMate 220",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 220"),
@@ -799,8 +789,8 @@
.driver_data = keymap_acer_travelmate_220
},
{
+ /* Acer TravelMate 260 */
.callback = dmi_matched,
- .ident = "Acer TravelMate 260",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 260"),
@@ -808,8 +798,8 @@
.driver_data = keymap_acer_travelmate_220
},
{
+ /* Acer TravelMate 230 */
.callback = dmi_matched,
- .ident = "Acer TravelMate 230",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 230"),
@@ -818,8 +808,8 @@
.driver_data = keymap_acer_travelmate_230
},
{
+ /* Acer TravelMate 280 */
.callback = dmi_matched,
- .ident = "Acer TravelMate 280",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 280"),
@@ -827,8 +817,8 @@
.driver_data = keymap_acer_travelmate_230
},
{
+ /* Acer TravelMate 240 */
.callback = dmi_matched,
- .ident = "Acer TravelMate 240",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 240"),
@@ -836,8 +826,8 @@
.driver_data = keymap_acer_travelmate_240
},
{
+ /* Acer TravelMate 250 */
.callback = dmi_matched,
- .ident = "Acer TravelMate 250",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 250"),
@@ -845,8 +835,8 @@
.driver_data = keymap_acer_travelmate_240
},
{
+ /* Acer TravelMate 2424NWXCi */
.callback = dmi_matched,
- .ident = "Acer TravelMate 2424NWXCi",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 2420"),
@@ -854,8 +844,8 @@
.driver_data = keymap_acer_travelmate_240
},
{
+ /* Acer TravelMate 350 */
.callback = dmi_matched,
- .ident = "Acer TravelMate 350",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 350"),
@@ -863,8 +853,8 @@
.driver_data = keymap_acer_travelmate_350
},
{
+ /* Acer TravelMate 360 */
.callback = dmi_matched,
- .ident = "Acer TravelMate 360",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 360"),
@@ -872,8 +862,8 @@
.driver_data = keymap_acer_travelmate_360
},
{
+ /* Acer TravelMate 610 */
.callback = dmi_matched,
- .ident = "Acer TravelMate 610",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "ACER"),
DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 610"),
@@ -881,8 +871,8 @@
.driver_data = keymap_acer_travelmate_610
},
{
+ /* Acer TravelMate 620 */
.callback = dmi_matched,
- .ident = "Acer TravelMate 620",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 620"),
@@ -890,8 +880,8 @@
.driver_data = keymap_acer_travelmate_630
},
{
+ /* Acer TravelMate 630 */
.callback = dmi_matched,
- .ident = "Acer TravelMate 630",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 630"),
@@ -899,8 +889,8 @@
.driver_data = keymap_acer_travelmate_630
},
{
+ /* AOpen 1559AS */
.callback = dmi_matched,
- .ident = "AOpen 1559AS",
.matches = {
DMI_MATCH(DMI_PRODUCT_NAME, "E2U"),
DMI_MATCH(DMI_BOARD_NAME, "E2U"),
@@ -908,8 +898,8 @@
.driver_data = keymap_aopen_1559as
},
{
+ /* Medion MD 9783 */
.callback = dmi_matched,
- .ident = "Medion MD 9783",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "MEDIONNB"),
DMI_MATCH(DMI_PRODUCT_NAME, "MD 9783"),
@@ -917,8 +907,8 @@
.driver_data = keymap_wistron_ms2111
},
{
+ /* Medion MD 40100 */
.callback = dmi_matched,
- .ident = "Medion MD 40100",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "MEDIONNB"),
DMI_MATCH(DMI_PRODUCT_NAME, "WID2000"),
@@ -926,8 +916,8 @@
.driver_data = keymap_wistron_md40100
},
{
+ /* Medion MD 2900 */
.callback = dmi_matched,
- .ident = "Medion MD 2900",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "MEDIONNB"),
DMI_MATCH(DMI_PRODUCT_NAME, "WIM 2000"),
@@ -935,8 +925,8 @@
.driver_data = keymap_wistron_md2900
},
{
+ /* Medion MD 42200 */
.callback = dmi_matched,
- .ident = "Medion MD 42200",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Medion"),
DMI_MATCH(DMI_PRODUCT_NAME, "WIM 2030"),
@@ -944,8 +934,8 @@
.driver_data = keymap_fs_amilo_pro_v2000
},
{
+ /* Medion MD 96500 */
.callback = dmi_matched,
- .ident = "Medion MD 96500",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "MEDIONPC"),
DMI_MATCH(DMI_PRODUCT_NAME, "WIM 2040"),
@@ -953,8 +943,8 @@
.driver_data = keymap_wistron_md96500
},
{
+ /* Medion MD 95400 */
.callback = dmi_matched,
- .ident = "Medion MD 95400",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "MEDIONPC"),
DMI_MATCH(DMI_PRODUCT_NAME, "WIM 2050"),
@@ -962,8 +952,8 @@
.driver_data = keymap_wistron_md96500
},
{
+ /* Fujitsu Siemens Amilo D7820 */
.callback = dmi_matched,
- .ident = "Fujitsu Siemens Amilo D7820",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), /* not sure */
DMI_MATCH(DMI_PRODUCT_NAME, "Amilo D"),
@@ -971,8 +961,8 @@
.driver_data = keymap_fs_amilo_d88x0
},
{
+ /* Fujitsu Siemens Amilo D88x0 */
.callback = dmi_matched,
- .ident = "Fujitsu Siemens Amilo D88x0",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
DMI_MATCH(DMI_PRODUCT_NAME, "AMILO D"),
@@ -1037,21 +1027,6 @@
static bool wifi_enabled;
static bool bluetooth_enabled;
-static void report_key(struct input_dev *dev, unsigned int keycode)
-{
- input_report_key(dev, keycode, 1);
- input_sync(dev);
- input_report_key(dev, keycode, 0);
- input_sync(dev);
-}
-
-static void report_switch(struct input_dev *dev, unsigned int code, int value)
-{
- input_report_switch(dev, code, value);
- input_sync(dev);
-}
-
-
/* led management */
static void wistron_mail_led_set(struct led_classdev *led_cdev,
enum led_brightness value)
@@ -1128,43 +1103,13 @@
led_classdev_resume(&wistron_wifi_led);
}
-static struct key_entry *wistron_get_entry_by_scancode(int code)
-{
- struct key_entry *key;
-
- for (key = keymap; key->type != KE_END; key++)
- if (code == key->code)
- return key;
-
- return NULL;
-}
-
-static struct key_entry *wistron_get_entry_by_keycode(int keycode)
-{
- struct key_entry *key;
-
- for (key = keymap; key->type != KE_END; key++)
- if (key->type == KE_KEY && keycode == key->keycode)
- return key;
-
- return NULL;
-}
-
static void handle_key(u8 code)
{
- const struct key_entry *key = wistron_get_entry_by_scancode(code);
+ const struct key_entry *key =
+ sparse_keymap_entry_from_scancode(wistron_idev->input, code);
if (key) {
switch (key->type) {
- case KE_KEY:
- report_key(wistron_idev->input, key->keycode);
- break;
-
- case KE_SW:
- report_switch(wistron_idev->input,
- key->sw.code, key->sw.value);
- break;
-
case KE_WIFI:
if (have_wifi) {
wifi_enabled = !wifi_enabled;
@@ -1180,7 +1125,9 @@
break;
default:
- BUG();
+ sparse_keymap_report_entry(wistron_idev->input,
+ key, 1, true);
+ break;
}
jiffies_last_press = jiffies;
} else
@@ -1220,42 +1167,39 @@
dev->poll_interval = POLL_INTERVAL_DEFAULT;
}
-static int wistron_getkeycode(struct input_dev *dev, int scancode, int *keycode)
+static int __devinit wistron_setup_keymap(struct input_dev *dev,
+ struct key_entry *entry)
{
- const struct key_entry *key = wistron_get_entry_by_scancode(scancode);
+ switch (entry->type) {
- if (key && key->type == KE_KEY) {
- *keycode = key->keycode;
- return 0;
+ /* if wifi or bluetooth are not available, create normal keys */
+ case KE_WIFI:
+ if (!have_wifi) {
+ entry->type = KE_KEY;
+ entry->keycode = KEY_WLAN;
+ }
+ break;
+
+ case KE_BLUETOOTH:
+ if (!have_bluetooth) {
+ entry->type = KE_KEY;
+ entry->keycode = KEY_BLUETOOTH;
+ }
+ break;
+
+ case KE_END:
+ if (entry->code & FE_UNTESTED)
+ printk(KERN_WARNING "Untested laptop multimedia keys, "
+ "please report success or failure to "
+ "eric.piel@tremplin-utc.net\n");
+ break;
}
- return -EINVAL;
-}
-
-static int wistron_setkeycode(struct input_dev *dev, int scancode, int keycode)
-{
- struct key_entry *key;
- int old_keycode;
-
- if (keycode < 0 || keycode > KEY_MAX)
- return -EINVAL;
-
- key = wistron_get_entry_by_scancode(scancode);
- if (key && key->type == KE_KEY) {
- old_keycode = key->keycode;
- key->keycode = keycode;
- set_bit(keycode, dev->keybit);
- if (!wistron_get_entry_by_keycode(old_keycode))
- clear_bit(old_keycode, dev->keybit);
- return 0;
- }
-
- return -EINVAL;
+ return 0;
}
static int __devinit setup_input_dev(void)
{
- struct key_entry *key;
struct input_dev *input_dev;
int error;
@@ -1263,7 +1207,7 @@
if (!wistron_idev)
return -ENOMEM;
- wistron_idev->flush = wistron_flush;
+ wistron_idev->open = wistron_flush;
wistron_idev->poll = wistron_poll;
wistron_idev->poll_interval = POLL_INTERVAL_DEFAULT;
@@ -1273,56 +1217,21 @@
input_dev->id.bustype = BUS_HOST;
input_dev->dev.parent = &wistron_device->dev;
- input_dev->getkeycode = wistron_getkeycode;
- input_dev->setkeycode = wistron_setkeycode;
-
- for (key = keymap; key->type != KE_END; key++) {
- switch (key->type) {
- case KE_KEY:
- set_bit(EV_KEY, input_dev->evbit);
- set_bit(key->keycode, input_dev->keybit);
- break;
-
- case KE_SW:
- set_bit(EV_SW, input_dev->evbit);
- set_bit(key->sw.code, input_dev->swbit);
- break;
-
- /* if wifi or bluetooth are not available, create normal keys */
- case KE_WIFI:
- if (!have_wifi) {
- key->type = KE_KEY;
- key->keycode = KEY_WLAN;
- key--;
- }
- break;
-
- case KE_BLUETOOTH:
- if (!have_bluetooth) {
- key->type = KE_KEY;
- key->keycode = KEY_BLUETOOTH;
- key--;
- }
- break;
-
- default:
- break;
- }
- }
-
- /* reads information flags on KE_END */
- if (key->code & FE_UNTESTED)
- printk(KERN_WARNING "Untested laptop multimedia keys, "
- "please report success or failure to eric.piel"
- "@tremplin-utc.net\n");
+ error = sparse_keymap_setup(input_dev, keymap, wistron_setup_keymap);
+ if (error)
+ goto err_free_dev;
error = input_register_polled_device(wistron_idev);
- if (error) {
- input_free_polled_device(wistron_idev);
- return error;
- }
+ if (error)
+ goto err_free_keymap;
return 0;
+
+ err_free_keymap:
+ sparse_keymap_free(input_dev);
+ err_free_dev:
+ input_free_polled_device(wistron_idev);
+ return error;
}
/* Driver core */
@@ -1371,6 +1280,7 @@
{
wistron_led_remove();
input_unregister_polled_device(wistron_idev);
+ sparse_keymap_free(wistron_idev->input);
input_free_polled_device(wistron_idev);
bios_detach();
diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c
index f361106..a3f492a 100644
--- a/drivers/input/mouse/alps.c
+++ b/drivers/input/mouse/alps.c
@@ -28,13 +28,16 @@
#define dbg(format, arg...) do {} while (0)
#endif
-#define ALPS_DUALPOINT 0x01
-#define ALPS_WHEEL 0x02
-#define ALPS_FW_BK_1 0x04
-#define ALPS_4BTN 0x08
-#define ALPS_OLDPROTO 0x10
-#define ALPS_PASS 0x20
-#define ALPS_FW_BK_2 0x40
+
+#define ALPS_OLDPROTO 0x01 /* old style input */
+#define ALPS_DUALPOINT 0x02 /* touchpad has trackstick */
+#define ALPS_PASS 0x04 /* device has a pass-through port */
+
+#define ALPS_WHEEL 0x08 /* hardware wheel present */
+#define ALPS_FW_BK_1 0x10 /* front & back buttons present */
+#define ALPS_FW_BK_2 0x20 /* front & back buttons present */
+#define ALPS_FOUR_BUTTONS 0x40 /* 4 direction button present */
+
static const struct alps_model_info alps_model_data[] = {
{ { 0x32, 0x02, 0x14 }, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT }, /* Toshiba Salellite Pro M10 */
@@ -56,7 +59,7 @@
{ { 0x22, 0x02, 0x0a }, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT },
{ { 0x22, 0x02, 0x14 }, 0xff, 0xff, ALPS_PASS | ALPS_DUALPOINT }, /* Dell Latitude D600 */
{ { 0x62, 0x02, 0x14 }, 0xcf, 0xcf, ALPS_PASS | ALPS_DUALPOINT }, /* Dell Latitude E6500 */
- { { 0x73, 0x02, 0x50 }, 0xcf, 0xcf, ALPS_FW_BK_1 }, /* Dell Vostro 1400 */
+ { { 0x73, 0x02, 0x50 }, 0xcf, 0xcf, ALPS_FOUR_BUTTONS }, /* Dell Vostro 1400 */
};
/*
@@ -83,6 +86,7 @@
static void alps_process_packet(struct psmouse *psmouse)
{
struct alps_data *priv = psmouse->private;
+ const struct alps_model_info *model = priv->i;
unsigned char *packet = psmouse->packet;
struct input_dev *dev = psmouse->dev;
struct input_dev *dev2 = priv->dev2;
@@ -101,7 +105,7 @@
return;
}
- if (priv->i->flags & ALPS_OLDPROTO) {
+ if (model->flags & ALPS_OLDPROTO) {
left = packet[2] & 0x10;
right = packet[2] & 0x08;
middle = 0;
@@ -117,12 +121,12 @@
z = packet[5];
}
- if (priv->i->flags & ALPS_FW_BK_1) {
+ if (model->flags & ALPS_FW_BK_1) {
back = packet[0] & 0x10;
forward = packet[2] & 4;
}
- if (priv->i->flags & ALPS_FW_BK_2) {
+ if (model->flags & ALPS_FW_BK_2) {
back = packet[3] & 4;
forward = packet[2] & 4;
if ((middle = forward && back))
@@ -132,7 +136,7 @@
ges = packet[2] & 1;
fin = packet[2] & 2;
- if ((priv->i->flags & ALPS_DUALPOINT) && z == 127) {
+ if ((model->flags & ALPS_DUALPOINT) && z == 127) {
input_report_rel(dev2, REL_X, (x > 383 ? (x - 768) : x));
input_report_rel(dev2, REL_Y, -(y > 255 ? (y - 512) : y));
@@ -150,7 +154,8 @@
input_report_key(dev, BTN_MIDDLE, middle);
/* Convert hardware tap to a reasonable Z value */
- if (ges && !fin) z = 40;
+ if (ges && !fin)
+ z = 40;
/*
* A "tap and drag" operation is reported by the hardware as a transition
@@ -166,8 +171,10 @@
}
priv->prev_fin = fin;
- if (z > 30) input_report_key(dev, BTN_TOUCH, 1);
- if (z < 25) input_report_key(dev, BTN_TOUCH, 0);
+ if (z > 30)
+ input_report_key(dev, BTN_TOUCH, 1);
+ if (z < 25)
+ input_report_key(dev, BTN_TOUCH, 0);
if (z > 0) {
input_report_abs(dev, ABS_X, x);
@@ -177,14 +184,21 @@
input_report_abs(dev, ABS_PRESSURE, z);
input_report_key(dev, BTN_TOOL_FINGER, z > 0);
- if (priv->i->flags & ALPS_WHEEL)
+ if (model->flags & ALPS_WHEEL)
input_report_rel(dev, REL_WHEEL, ((packet[2] << 1) & 0x08) - ((packet[0] >> 4) & 0x07));
- if (priv->i->flags & (ALPS_FW_BK_1 | ALPS_FW_BK_2)) {
+ if (model->flags & (ALPS_FW_BK_1 | ALPS_FW_BK_2)) {
input_report_key(dev, BTN_FORWARD, forward);
input_report_key(dev, BTN_BACK, back);
}
+ if (model->flags & ALPS_FOUR_BUTTONS) {
+ input_report_key(dev, BTN_0, packet[2] & 4);
+ input_report_key(dev, BTN_1, packet[0] & 0x10);
+ input_report_key(dev, BTN_2, packet[3] & 4);
+ input_report_key(dev, BTN_3, packet[0] & 0x20);
+ }
+
input_sync(dev);
}
@@ -393,15 +407,12 @@
return 0;
}
-static int alps_hw_init(struct psmouse *psmouse, int *version)
+static int alps_hw_init(struct psmouse *psmouse)
{
struct alps_data *priv = psmouse->private;
+ const struct alps_model_info *model = priv->i;
- priv->i = alps_get_model(psmouse, version);
- if (!priv->i)
- return -1;
-
- if ((priv->i->flags & ALPS_PASS) &&
+ if ((model->flags & ALPS_PASS) &&
alps_passthrough_mode(psmouse, true)) {
return -1;
}
@@ -416,7 +427,7 @@
return -1;
}
- if ((priv->i->flags & ALPS_PASS) &&
+ if ((model->flags & ALPS_PASS) &&
alps_passthrough_mode(psmouse, false)) {
return -1;
}
@@ -432,12 +443,15 @@
static int alps_reconnect(struct psmouse *psmouse)
{
+ const struct alps_model_info *model;
+
psmouse_reset(psmouse);
- if (alps_hw_init(psmouse, NULL))
+ model = alps_get_model(psmouse, NULL);
+ if (!model)
return -1;
- return 0;
+ return alps_hw_init(psmouse);
}
static void alps_disconnect(struct psmouse *psmouse)
@@ -452,6 +466,7 @@
int alps_init(struct psmouse *psmouse)
{
struct alps_data *priv;
+ const struct alps_model_info *model;
struct input_dev *dev1 = psmouse->dev, *dev2;
int version;
@@ -463,33 +478,48 @@
priv->dev2 = dev2;
psmouse->private = priv;
- if (alps_hw_init(psmouse, &version))
+ model = alps_get_model(psmouse, &version);
+ if (!model)
+ goto init_fail;
+
+ priv->i = model;
+
+ if (alps_hw_init(psmouse))
goto init_fail;
dev1->evbit[BIT_WORD(EV_KEY)] |= BIT_MASK(EV_KEY);
dev1->keybit[BIT_WORD(BTN_TOUCH)] |= BIT_MASK(BTN_TOUCH);
dev1->keybit[BIT_WORD(BTN_TOOL_FINGER)] |= BIT_MASK(BTN_TOOL_FINGER);
- dev1->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_LEFT) |
- BIT_MASK(BTN_MIDDLE) | BIT_MASK(BTN_RIGHT);
+ dev1->keybit[BIT_WORD(BTN_LEFT)] |=
+ BIT_MASK(BTN_LEFT) | BIT_MASK(BTN_RIGHT);
dev1->evbit[BIT_WORD(EV_ABS)] |= BIT_MASK(EV_ABS);
input_set_abs_params(dev1, ABS_X, 0, 1023, 0, 0);
input_set_abs_params(dev1, ABS_Y, 0, 767, 0, 0);
input_set_abs_params(dev1, ABS_PRESSURE, 0, 127, 0, 0);
- if (priv->i->flags & ALPS_WHEEL) {
+ if (model->flags & ALPS_WHEEL) {
dev1->evbit[BIT_WORD(EV_REL)] |= BIT_MASK(EV_REL);
dev1->relbit[BIT_WORD(REL_WHEEL)] |= BIT_MASK(REL_WHEEL);
}
- if (priv->i->flags & (ALPS_FW_BK_1 | ALPS_FW_BK_2)) {
+ if (model->flags & (ALPS_FW_BK_1 | ALPS_FW_BK_2)) {
dev1->keybit[BIT_WORD(BTN_FORWARD)] |= BIT_MASK(BTN_FORWARD);
dev1->keybit[BIT_WORD(BTN_BACK)] |= BIT_MASK(BTN_BACK);
}
+ if (model->flags & ALPS_FOUR_BUTTONS) {
+ dev1->keybit[BIT_WORD(BTN_0)] |= BIT_MASK(BTN_0);
+ dev1->keybit[BIT_WORD(BTN_1)] |= BIT_MASK(BTN_1);
+ dev1->keybit[BIT_WORD(BTN_2)] |= BIT_MASK(BTN_2);
+ dev1->keybit[BIT_WORD(BTN_3)] |= BIT_MASK(BTN_3);
+ } else {
+ dev1->keybit[BIT_WORD(BTN_MIDDLE)] |= BIT_MASK(BTN_MIDDLE);
+ }
+
snprintf(priv->phys, sizeof(priv->phys), "%s/input1", psmouse->ps2dev.serio->phys);
dev2->phys = priv->phys;
- dev2->name = (priv->i->flags & ALPS_DUALPOINT) ? "DualPoint Stick" : "PS/2 Mouse";
+ dev2->name = (model->flags & ALPS_DUALPOINT) ? "DualPoint Stick" : "PS/2 Mouse";
dev2->id.bustype = BUS_I8042;
dev2->id.vendor = 0x0002;
dev2->id.product = PSMOUSE_ALPS;
@@ -497,9 +527,9 @@
dev2->dev.parent = &psmouse->ps2dev.serio->dev;
dev2->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REL);
- dev2->relbit[BIT_WORD(REL_X)] |= BIT_MASK(REL_X) | BIT_MASK(REL_Y);
- dev2->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_LEFT) |
- BIT_MASK(BTN_MIDDLE) | BIT_MASK(BTN_RIGHT);
+ dev2->relbit[BIT_WORD(REL_X)] = BIT_MASK(REL_X) | BIT_MASK(REL_Y);
+ dev2->keybit[BIT_WORD(BTN_LEFT)] =
+ BIT_MASK(BTN_LEFT) | BIT_MASK(BTN_MIDDLE) | BIT_MASK(BTN_RIGHT);
if (input_register_device(priv->dev2))
goto init_fail;
diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c
index fda35e6..b27684f 100644
--- a/drivers/input/mouse/elantech.c
+++ b/drivers/input/mouse/elantech.c
@@ -420,6 +420,7 @@
__set_bit(EV_KEY, dev->evbit);
__set_bit(EV_ABS, dev->evbit);
+ __clear_bit(EV_REL, dev->evbit);
__set_bit(BTN_LEFT, dev->keybit);
__set_bit(BTN_RIGHT, dev->keybit);
diff --git a/drivers/input/mouse/hgpk.c b/drivers/input/mouse/hgpk.c
index de1e553..b146237 100644
--- a/drivers/input/mouse/hgpk.c
+++ b/drivers/input/mouse/hgpk.c
@@ -430,19 +430,6 @@
struct input_dev *dev = psmouse->dev;
int err;
- /* unset the things that psmouse-base sets which we don't have */
- __clear_bit(BTN_MIDDLE, dev->keybit);
-
- /* set the things we do have */
- __set_bit(EV_KEY, dev->evbit);
- __set_bit(EV_REL, dev->evbit);
-
- __set_bit(REL_X, dev->relbit);
- __set_bit(REL_Y, dev->relbit);
-
- __set_bit(BTN_LEFT, dev->keybit);
- __set_bit(BTN_RIGHT, dev->keybit);
-
/* register handlers */
psmouse->protocol_handler = hgpk_process_byte;
psmouse->poll = hgpk_poll;
diff --git a/drivers/input/mouse/lifebook.c b/drivers/input/mouse/lifebook.c
index 8281155..2e6bdfe 100644
--- a/drivers/input/mouse/lifebook.c
+++ b/drivers/input/mouse/lifebook.c
@@ -25,11 +25,13 @@
char phys[32];
};
+static bool lifebook_present;
+
static const char *desired_serio_phys;
-static int lifebook_set_serio_phys(const struct dmi_system_id *d)
+static int lifebook_limit_serio3(const struct dmi_system_id *d)
{
- desired_serio_phys = d->driver_data;
+ desired_serio_phys = "isa0060/serio3";
return 0;
}
@@ -41,53 +43,53 @@
return 0;
}
-static const struct dmi_system_id lifebook_dmi_table[] = {
+static const struct dmi_system_id __initconst lifebook_dmi_table[] = {
+#if defined(CONFIG_DMI) && defined(CONFIG_X86)
{
- .ident = "FLORA-ie 55mi",
+ /* FLORA-ie 55mi */
.matches = {
DMI_MATCH(DMI_PRODUCT_NAME, "FLORA-ie 55mi"),
},
},
{
- .ident = "LifeBook B",
+ /* LifeBook B */
.matches = {
DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook B Series"),
},
},
{
- .ident = "Lifebook B",
+ /* Lifebook B */
.matches = {
DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK B Series"),
},
},
{
- .ident = "Lifebook B-2130",
+ /* Lifebook B-2130 */
.matches = {
DMI_MATCH(DMI_BOARD_NAME, "ZEPHYR"),
},
},
{
- .ident = "Lifebook B213x/B2150",
+ /* Lifebook B213x/B2150 */
.matches = {
DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook B2131/B2133/B2150"),
},
},
{
- .ident = "Zephyr",
+ /* Zephyr */
.matches = {
DMI_MATCH(DMI_PRODUCT_NAME, "ZEPHYR"),
},
},
{
- .ident = "CF-18",
+ /* Panasonic CF-18 */
.matches = {
DMI_MATCH(DMI_PRODUCT_NAME, "CF-18"),
},
- .callback = lifebook_set_serio_phys,
- .driver_data = "isa0060/serio3",
+ .callback = lifebook_limit_serio3,
},
{
- .ident = "Panasonic CF-28",
+ /* Panasonic CF-28 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Matsushita"),
DMI_MATCH(DMI_PRODUCT_NAME, "CF-28"),
@@ -95,7 +97,7 @@
.callback = lifebook_set_6byte_proto,
},
{
- .ident = "Panasonic CF-29",
+ /* Panasonic CF-29 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Matsushita"),
DMI_MATCH(DMI_PRODUCT_NAME, "CF-29"),
@@ -103,21 +105,27 @@
.callback = lifebook_set_6byte_proto,
},
{
- .ident = "CF-72",
+ /* Panasonic CF-72 */
.matches = {
DMI_MATCH(DMI_PRODUCT_NAME, "CF-72"),
},
.callback = lifebook_set_6byte_proto,
},
{
- .ident = "Lifebook B142",
+ /* Lifebook B142 */
.matches = {
DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook B142"),
},
},
{ }
+#endif
};
+void __init lifebook_module_init(void)
+{
+ lifebook_present = dmi_check_system(lifebook_dmi_table);
+}
+
static psmouse_ret_t lifebook_process_byte(struct psmouse *psmouse)
{
struct lifebook_data *priv = psmouse->private;
@@ -198,10 +206,10 @@
return -1;
/*
- Enable absolute output -- ps2_command fails always but if
- you leave this call out the touchsreen will never send
- absolute coordinates
- */
+ * Enable absolute output -- ps2_command fails always but if
+ * you leave this call out the touchsreen will never send
+ * absolute coordinates
+ */
param = lifebook_use_6byte_proto ? 0x08 : 0x07;
ps2_command(ps2dev, ¶m, PSMOUSE_CMD_SETRES);
@@ -243,7 +251,7 @@
int lifebook_detect(struct psmouse *psmouse, bool set_properties)
{
- if (!dmi_check_system(lifebook_dmi_table))
+ if (!lifebook_present)
return -1;
if (desired_serio_phys &&
@@ -283,8 +291,8 @@
dev2->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REL);
dev2->relbit[BIT_WORD(REL_X)] = BIT_MASK(REL_X) | BIT_MASK(REL_Y);
- dev2->keybit[BIT_WORD(BTN_LEFT)] = BIT_MASK(BTN_LEFT) |
- BIT_MASK(BTN_RIGHT);
+ dev2->keybit[BIT_WORD(BTN_LEFT)] =
+ BIT_MASK(BTN_LEFT) | BIT_MASK(BTN_RIGHT);
error = input_register_device(priv->dev2);
if (error)
@@ -309,6 +317,7 @@
dev1->evbit[0] = BIT_MASK(EV_ABS) | BIT_MASK(EV_KEY);
dev1->relbit[0] = 0;
+ dev1->keybit[BIT_WORD(BTN_MOUSE)] = 0;
dev1->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
input_set_abs_params(dev1, ABS_X, 0, max_coord, 0, 0);
input_set_abs_params(dev1, ABS_Y, 0, max_coord, 0, 0);
diff --git a/drivers/input/mouse/lifebook.h b/drivers/input/mouse/lifebook.h
index 407cb22..4c4326c 100644
--- a/drivers/input/mouse/lifebook.h
+++ b/drivers/input/mouse/lifebook.h
@@ -12,9 +12,13 @@
#define _LIFEBOOK_H
#ifdef CONFIG_MOUSE_PS2_LIFEBOOK
+void lifebook_module_init(void);
int lifebook_detect(struct psmouse *psmouse, bool set_properties);
int lifebook_init(struct psmouse *psmouse);
#else
+inline void lifebook_module_init(void)
+{
+}
inline int lifebook_detect(struct psmouse *psmouse, bool set_properties)
{
return -ENOSYS;
diff --git a/drivers/input/mouse/logips2pp.c b/drivers/input/mouse/logips2pp.c
index ab5dc5f..543c240 100644
--- a/drivers/input/mouse/logips2pp.c
+++ b/drivers/input/mouse/logips2pp.c
@@ -404,8 +404,8 @@
}
}
- if (buttons < 3)
- __clear_bit(BTN_MIDDLE, psmouse->dev->keybit);
+ if (buttons >= 3)
+ __set_bit(BTN_MIDDLE, psmouse->dev->keybit);
if (model_info)
ps2pp_set_model_properties(psmouse, model_info, use_ps2pp);
diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c
index 07c5379..fd0bc09 100644
--- a/drivers/input/mouse/psmouse-base.c
+++ b/drivers/input/mouse/psmouse-base.c
@@ -425,6 +425,7 @@
return -1;
if (set_properties) {
+ __set_bit(BTN_MIDDLE, psmouse->dev->keybit);
__set_bit(BTN_EXTRA, psmouse->dev->keybit);
__set_bit(BTN_SIDE, psmouse->dev->keybit);
__set_bit(REL_WHEEL, psmouse->dev->relbit);
@@ -460,8 +461,10 @@
__set_bit(BTN_MIDDLE, psmouse->dev->keybit);
__set_bit(REL_WHEEL, psmouse->dev->relbit);
- if (!psmouse->vendor) psmouse->vendor = "Generic";
- if (!psmouse->name) psmouse->name = "Wheel Mouse";
+ if (!psmouse->vendor)
+ psmouse->vendor = "Generic";
+ if (!psmouse->name)
+ psmouse->name = "Wheel Mouse";
psmouse->pktsize = 4;
}
@@ -504,8 +507,10 @@
__set_bit(BTN_SIDE, psmouse->dev->keybit);
__set_bit(BTN_EXTRA, psmouse->dev->keybit);
- if (!psmouse->vendor) psmouse->vendor = "Generic";
- if (!psmouse->name) psmouse->name = "Explorer Mouse";
+ if (!psmouse->vendor)
+ psmouse->vendor = "Generic";
+ if (!psmouse->name)
+ psmouse->name = "Explorer Mouse";
psmouse->pktsize = 4;
}
@@ -536,6 +541,7 @@
return -1;
if (set_properties) {
+ __set_bit(BTN_MIDDLE, psmouse->dev->keybit);
__set_bit(BTN_EXTRA, psmouse->dev->keybit);
psmouse->vendor = "Kensington";
@@ -551,8 +557,16 @@
static int ps2bare_detect(struct psmouse *psmouse, bool set_properties)
{
if (set_properties) {
- if (!psmouse->vendor) psmouse->vendor = "Generic";
- if (!psmouse->name) psmouse->name = "Mouse";
+ if (!psmouse->vendor)
+ psmouse->vendor = "Generic";
+ if (!psmouse->name)
+ psmouse->name = "Mouse";
+
+/*
+ * We have no way of figuring true number of buttons so let's
+ * assume that the device has 3.
+ */
+ __set_bit(BTN_MIDDLE, psmouse->dev->keybit);
}
return 0;
@@ -567,6 +581,8 @@
if (set_properties) {
psmouse->vendor = "Cortron";
psmouse->name = "PS/2 Trackball";
+
+ __set_bit(BTN_MIDDLE, psmouse->dev->keybit);
__set_bit(BTN_SIDE, psmouse->dev->keybit);
}
@@ -1184,15 +1200,16 @@
mutex_unlock(&psmouse_mutex);
}
-static int psmouse_switch_protocol(struct psmouse *psmouse, const struct psmouse_protocol *proto)
+static int psmouse_switch_protocol(struct psmouse *psmouse,
+ const struct psmouse_protocol *proto)
{
struct input_dev *input_dev = psmouse->dev;
input_dev->dev.parent = &psmouse->ps2dev.serio->dev;
input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REL);
- input_dev->keybit[BIT_WORD(BTN_MOUSE)] = BIT_MASK(BTN_LEFT) |
- BIT_MASK(BTN_MIDDLE) | BIT_MASK(BTN_RIGHT);
+ input_dev->keybit[BIT_WORD(BTN_MOUSE)] =
+ BIT_MASK(BTN_LEFT) | BIT_MASK(BTN_RIGHT);
input_dev->relbit[0] = BIT_MASK(REL_X) | BIT_MASK(REL_Y);
psmouse->set_rate = psmouse_set_rate;
@@ -1209,8 +1226,7 @@
return -1;
psmouse->type = proto->type;
- }
- else
+ } else
psmouse->type = psmouse_extensions(psmouse,
psmouse_max_proto, true);
@@ -1680,6 +1696,9 @@
{
int err;
+ lifebook_module_init();
+ synaptics_module_init();
+
kpsmoused_wq = create_singlethread_workqueue("kpsmoused");
if (!kpsmoused_wq) {
printk(KERN_ERR "psmouse: failed to create kpsmoused workqueue\n");
diff --git a/drivers/input/mouse/sentelic.c b/drivers/input/mouse/sentelic.c
index f84cbd9..77b9fd0 100644
--- a/drivers/input/mouse/sentelic.c
+++ b/drivers/input/mouse/sentelic.c
@@ -836,6 +836,7 @@
priv->flags |= FSPDRV_FLAG_EN_OPC;
/* Set up various supported input event bits */
+ __set_bit(BTN_MIDDLE, psmouse->dev->keybit);
__set_bit(BTN_BACK, psmouse->dev->keybit);
__set_bit(BTN_FORWARD, psmouse->dev->keybit);
__set_bit(REL_WHEEL, psmouse->dev->relbit);
diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
index f4a6125..05689e7 100644
--- a/drivers/input/mouse/synaptics.c
+++ b/drivers/input/mouse/synaptics.c
@@ -24,6 +24,7 @@
*/
#include <linux/module.h>
+#include <linux/dmi.h>
#include <linux/input.h>
#include <linux/serio.h>
#include <linux/libps2.h>
@@ -629,25 +630,26 @@
return 0;
}
-#if defined(__i386__)
-#include <linux/dmi.h>
-static const struct dmi_system_id toshiba_dmi_table[] = {
+static bool impaired_toshiba_kbc;
+
+static const struct dmi_system_id __initconst toshiba_dmi_table[] = {
+#if defined(CONFIG_DMI) && defined(CONFIG_X86)
{
- .ident = "Toshiba Satellite",
+ /* Toshiba Satellite */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
DMI_MATCH(DMI_PRODUCT_NAME, "Satellite"),
},
},
{
- .ident = "Toshiba Dynabook",
+ /* Toshiba Dynabook */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
DMI_MATCH(DMI_PRODUCT_NAME, "dynabook"),
},
},
{
- .ident = "Toshiba Portege M300",
+ /* Toshiba Portege M300 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
DMI_MATCH(DMI_PRODUCT_NAME, "PORTEGE M300"),
@@ -655,7 +657,7 @@
},
{
- .ident = "Toshiba Portege M300",
+ /* Toshiba Portege M300 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
DMI_MATCH(DMI_PRODUCT_NAME, "Portable PC"),
@@ -664,8 +666,13 @@
},
{ }
-};
#endif
+};
+
+void __init synaptics_module_init(void)
+{
+ impaired_toshiba_kbc = dmi_check_system(toshiba_dmi_table);
+}
int synaptics_init(struct psmouse *psmouse)
{
@@ -718,18 +725,16 @@
if (SYN_CAP_PASS_THROUGH(priv->capabilities))
synaptics_pt_create(psmouse);
-#if defined(__i386__)
/*
* Toshiba's KBC seems to have trouble handling data from
* Synaptics as full rate, switch to lower rate which is roughly
* thye same as rate of standard PS/2 mouse.
*/
- if (psmouse->rate >= 80 && dmi_check_system(toshiba_dmi_table)) {
+ if (psmouse->rate >= 80 && impaired_toshiba_kbc) {
printk(KERN_INFO "synaptics: Toshiba %s detected, limiting rate to 40pps.\n",
dmi_get_system_info(DMI_PRODUCT_NAME));
psmouse->rate = 40;
}
-#endif
return 0;
@@ -740,6 +745,10 @@
#else /* CONFIG_MOUSE_PS2_SYNAPTICS */
+void __init synaptics_module_init(void)
+{
+}
+
int synaptics_init(struct psmouse *psmouse)
{
return -ENOSYS;
diff --git a/drivers/input/mouse/synaptics.h b/drivers/input/mouse/synaptics.h
index 871f6fe..838e7f2 100644
--- a/drivers/input/mouse/synaptics.h
+++ b/drivers/input/mouse/synaptics.h
@@ -105,6 +105,7 @@
int scroll;
};
+void synaptics_module_init(void);
int synaptics_detect(struct psmouse *psmouse, bool set_properties);
int synaptics_init(struct psmouse *psmouse);
void synaptics_reset(struct psmouse *psmouse);
diff --git a/drivers/input/mouse/synaptics_i2c.c b/drivers/input/mouse/synaptics_i2c.c
index 7283c78..9867dfe 100644
--- a/drivers/input/mouse/synaptics_i2c.c
+++ b/drivers/input/mouse/synaptics_i2c.c
@@ -420,8 +420,8 @@
}
/* Control the Device polling rate / Work Handler sleep time */
-unsigned long synaptics_i2c_adjust_delay(struct synaptics_i2c *touch,
- bool have_data)
+static unsigned long synaptics_i2c_adjust_delay(struct synaptics_i2c *touch,
+ bool have_data)
{
unsigned long delay, nodata_count_thres;
@@ -520,7 +520,7 @@
__set_bit(BTN_LEFT, input->keybit);
}
-struct synaptics_i2c *synaptics_i2c_touch_create(struct i2c_client *client)
+static struct synaptics_i2c *synaptics_i2c_touch_create(struct i2c_client *client)
{
struct synaptics_i2c *touch;
diff --git a/drivers/input/mouse/touchkit_ps2.c b/drivers/input/mouse/touchkit_ps2.c
index 0308a0f..909431c 100644
--- a/drivers/input/mouse/touchkit_ps2.c
+++ b/drivers/input/mouse/touchkit_ps2.c
@@ -86,7 +86,8 @@
if (set_properties) {
dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
- __set_bit(BTN_TOUCH, dev->keybit);
+ dev->keybit[BIT_WORD(BTN_MOUSE)] = 0;
+ dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
input_set_abs_params(dev, ABS_X, 0, TOUCHKIT_MAX_XC, 0, 0);
input_set_abs_params(dev, ABS_Y, 0, TOUCHKIT_MAX_YC, 0, 0);
diff --git a/drivers/input/mouse/trackpoint.c b/drivers/input/mouse/trackpoint.c
index e354362..63d4a67 100644
--- a/drivers/input/mouse/trackpoint.c
+++ b/drivers/input/mouse/trackpoint.c
@@ -284,7 +284,6 @@
int trackpoint_detect(struct psmouse *psmouse, bool set_properties)
{
- struct trackpoint_data *priv;
struct ps2dev *ps2dev = &psmouse->ps2dev;
unsigned char firmware_id;
unsigned char button_info;
@@ -301,8 +300,8 @@
button_info = 0;
}
- psmouse->private = priv = kzalloc(sizeof(struct trackpoint_data), GFP_KERNEL);
- if (!priv)
+ psmouse->private = kzalloc(sizeof(struct trackpoint_data), GFP_KERNEL);
+ if (!psmouse->private)
return -1;
psmouse->vendor = "IBM";
@@ -311,7 +310,10 @@
psmouse->reconnect = trackpoint_reconnect;
psmouse->disconnect = trackpoint_disconnect;
- trackpoint_defaults(priv);
+ if ((button_info & 0x0f) >= 3)
+ __set_bit(BTN_MIDDLE, psmouse->dev->keybit);
+
+ trackpoint_defaults(psmouse->private);
trackpoint_sync(psmouse);
error = sysfs_create_group(&ps2dev->serio->dev.kobj, &trackpoint_attr_group);
@@ -319,7 +321,8 @@
printk(KERN_ERR
"trackpoint.c: failed to create sysfs attributes, error: %d\n",
error);
- kfree(priv);
+ kfree(psmouse->private);
+ psmouse->private = NULL;
return -1;
}
diff --git a/drivers/input/mouse/vsxxxaa.c b/drivers/input/mouse/vsxxxaa.c
index 7011144..bf2c0c8 100644
--- a/drivers/input/mouse/vsxxxaa.c
+++ b/drivers/input/mouse/vsxxxaa.c
@@ -86,27 +86,28 @@
#define DRIVER_DESC "Driver for DEC VSXXX-AA and -GA mice and VSXXX-AB tablet"
-MODULE_AUTHOR ("Jan-Benedict Glaw <jbglaw@lug-owl.de>");
-MODULE_DESCRIPTION (DRIVER_DESC);
-MODULE_LICENSE ("GPL");
+MODULE_AUTHOR("Jan-Benedict Glaw <jbglaw@lug-owl.de>");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
#undef VSXXXAA_DEBUG
#ifdef VSXXXAA_DEBUG
-#define DBG(x...) printk (x)
+#define DBG(x...) printk(x)
#else
#define DBG(x...) do {} while (0)
#endif
#define VSXXXAA_INTRO_MASK 0x80
#define VSXXXAA_INTRO_HEAD 0x80
-#define IS_HDR_BYTE(x) (((x) & VSXXXAA_INTRO_MASK) \
- == VSXXXAA_INTRO_HEAD)
+#define IS_HDR_BYTE(x) \
+ (((x) & VSXXXAA_INTRO_MASK) == VSXXXAA_INTRO_HEAD)
#define VSXXXAA_PACKET_MASK 0xe0
#define VSXXXAA_PACKET_REL 0x80
#define VSXXXAA_PACKET_ABS 0xc0
#define VSXXXAA_PACKET_POR 0xa0
-#define MATCH_PACKET_TYPE(data, type) (((data) & VSXXXAA_PACKET_MASK) == (type))
+#define MATCH_PACKET_TYPE(data, type) \
+ (((data) & VSXXXAA_PACKET_MASK) == (type))
@@ -123,52 +124,50 @@
char phys[32];
};
-static void
-vsxxxaa_drop_bytes (struct vsxxxaa *mouse, int num)
+static void vsxxxaa_drop_bytes(struct vsxxxaa *mouse, int num)
{
- if (num >= mouse->count)
+ if (num >= mouse->count) {
mouse->count = 0;
- else {
- memmove (mouse->buf, mouse->buf + num - 1, BUFLEN - num);
+ } else {
+ memmove(mouse->buf, mouse->buf + num - 1, BUFLEN - num);
mouse->count -= num;
}
}
-static void
-vsxxxaa_queue_byte (struct vsxxxaa *mouse, unsigned char byte)
+static void vsxxxaa_queue_byte(struct vsxxxaa *mouse, unsigned char byte)
{
if (mouse->count == BUFLEN) {
- printk (KERN_ERR "%s on %s: Dropping a byte of full buffer.\n",
- mouse->name, mouse->phys);
- vsxxxaa_drop_bytes (mouse, 1);
+ printk(KERN_ERR "%s on %s: Dropping a byte of full buffer.\n",
+ mouse->name, mouse->phys);
+ vsxxxaa_drop_bytes(mouse, 1);
}
- DBG (KERN_INFO "Queueing byte 0x%02x\n", byte);
+
+ DBG(KERN_INFO "Queueing byte 0x%02x\n", byte);
mouse->buf[mouse->count++] = byte;
}
-static void
-vsxxxaa_detection_done (struct vsxxxaa *mouse)
+static void vsxxxaa_detection_done(struct vsxxxaa *mouse)
{
switch (mouse->type) {
- case 0x02:
- strlcpy (mouse->name, "DEC VSXXX-AA/-GA mouse",
- sizeof (mouse->name));
- break;
+ case 0x02:
+ strlcpy(mouse->name, "DEC VSXXX-AA/-GA mouse",
+ sizeof(mouse->name));
+ break;
- case 0x04:
- strlcpy (mouse->name, "DEC VSXXX-AB digitizer",
- sizeof (mouse->name));
- break;
+ case 0x04:
+ strlcpy(mouse->name, "DEC VSXXX-AB digitizer",
+ sizeof(mouse->name));
+ break;
- default:
- snprintf (mouse->name, sizeof (mouse->name),
- "unknown DEC pointer device (type = 0x%02x)",
- mouse->type);
- break;
+ default:
+ snprintf(mouse->name, sizeof(mouse->name),
+ "unknown DEC pointer device (type = 0x%02x)",
+ mouse->type);
+ break;
}
- printk (KERN_INFO
+ printk(KERN_INFO
"Found %s version 0x%02x from country 0x%02x on port %s\n",
mouse->name, mouse->version, mouse->country, mouse->phys);
}
@@ -176,42 +175,38 @@
/*
* Returns number of bytes to be dropped, 0 if packet is okay.
*/
-static int
-vsxxxaa_check_packet (struct vsxxxaa *mouse, int packet_len)
+static int vsxxxaa_check_packet(struct vsxxxaa *mouse, int packet_len)
{
int i;
/* First byte must be a header byte */
- if (!IS_HDR_BYTE (mouse->buf[0])) {
- DBG ("vsck: len=%d, 1st=0x%02x\n", packet_len, mouse->buf[0]);
+ if (!IS_HDR_BYTE(mouse->buf[0])) {
+ DBG("vsck: len=%d, 1st=0x%02x\n", packet_len, mouse->buf[0]);
return 1;
}
/* Check all following bytes */
- if (packet_len > 1) {
- for (i = 1; i < packet_len; i++) {
- if (IS_HDR_BYTE (mouse->buf[i])) {
- printk (KERN_ERR "Need to drop %d bytes "
- "of a broken packet.\n",
- i - 1);
- DBG (KERN_INFO "check: len=%d, b[%d]=0x%02x\n",
- packet_len, i, mouse->buf[i]);
- return i - 1;
- }
+ for (i = 1; i < packet_len; i++) {
+ if (IS_HDR_BYTE(mouse->buf[i])) {
+ printk(KERN_ERR
+ "Need to drop %d bytes of a broken packet.\n",
+ i - 1);
+ DBG(KERN_INFO "check: len=%d, b[%d]=0x%02x\n",
+ packet_len, i, mouse->buf[i]);
+ return i - 1;
}
}
return 0;
}
-static __inline__ int
-vsxxxaa_smells_like_packet (struct vsxxxaa *mouse, unsigned char type, size_t len)
+static inline int vsxxxaa_smells_like_packet(struct vsxxxaa *mouse,
+ unsigned char type, size_t len)
{
- return (mouse->count >= len) && MATCH_PACKET_TYPE (mouse->buf[0], type);
+ return mouse->count >= len && MATCH_PACKET_TYPE(mouse->buf[0], type);
}
-static void
-vsxxxaa_handle_REL_packet (struct vsxxxaa *mouse)
+static void vsxxxaa_handle_REL_packet(struct vsxxxaa *mouse)
{
struct input_dev *dev = mouse->dev;
unsigned char *buf = mouse->buf;
@@ -232,43 +227,42 @@
* 0, bit 4 of byte 0 is direction.
*/
dx = buf[1] & 0x7f;
- dx *= ((buf[0] >> 4) & 0x01)? 1: -1;
+ dx *= ((buf[0] >> 4) & 0x01) ? 1 : -1;
/*
* Low 7 bit of byte 2 are abs(dy), bit 7 is
* 0, bit 3 of byte 0 is direction.
*/
dy = buf[2] & 0x7f;
- dy *= ((buf[0] >> 3) & 0x01)? -1: 1;
+ dy *= ((buf[0] >> 3) & 0x01) ? -1 : 1;
/*
* Get button state. It's the low three bits
* (for three buttons) of byte 0.
*/
- left = (buf[0] & 0x04)? 1: 0;
- middle = (buf[0] & 0x02)? 1: 0;
- right = (buf[0] & 0x01)? 1: 0;
+ left = buf[0] & 0x04;
+ middle = buf[0] & 0x02;
+ right = buf[0] & 0x01;
- vsxxxaa_drop_bytes (mouse, 3);
+ vsxxxaa_drop_bytes(mouse, 3);
- DBG (KERN_INFO "%s on %s: dx=%d, dy=%d, buttons=%s%s%s\n",
- mouse->name, mouse->phys, dx, dy,
- left? "L": "l", middle? "M": "m", right? "R": "r");
+ DBG(KERN_INFO "%s on %s: dx=%d, dy=%d, buttons=%s%s%s\n",
+ mouse->name, mouse->phys, dx, dy,
+ left ? "L" : "l", middle ? "M" : "m", right ? "R" : "r");
/*
* Report what we've found so far...
*/
- input_report_key (dev, BTN_LEFT, left);
- input_report_key (dev, BTN_MIDDLE, middle);
- input_report_key (dev, BTN_RIGHT, right);
- input_report_key (dev, BTN_TOUCH, 0);
- input_report_rel (dev, REL_X, dx);
- input_report_rel (dev, REL_Y, dy);
- input_sync (dev);
+ input_report_key(dev, BTN_LEFT, left);
+ input_report_key(dev, BTN_MIDDLE, middle);
+ input_report_key(dev, BTN_RIGHT, right);
+ input_report_key(dev, BTN_TOUCH, 0);
+ input_report_rel(dev, REL_X, dx);
+ input_report_rel(dev, REL_Y, dy);
+ input_sync(dev);
}
-static void
-vsxxxaa_handle_ABS_packet (struct vsxxxaa *mouse)
+static void vsxxxaa_handle_ABS_packet(struct vsxxxaa *mouse)
{
struct input_dev *dev = mouse->dev;
unsigned char *buf = mouse->buf;
@@ -296,32 +290,31 @@
/*
* Get button state. It's bits <4..1> of byte 0.
*/
- left = (buf[0] & 0x02)? 1: 0;
- middle = (buf[0] & 0x04)? 1: 0;
- right = (buf[0] & 0x08)? 1: 0;
- touch = (buf[0] & 0x10)? 1: 0;
+ left = buf[0] & 0x02;
+ middle = buf[0] & 0x04;
+ right = buf[0] & 0x08;
+ touch = buf[0] & 0x10;
- vsxxxaa_drop_bytes (mouse, 5);
+ vsxxxaa_drop_bytes(mouse, 5);
- DBG (KERN_INFO "%s on %s: x=%d, y=%d, buttons=%s%s%s%s\n",
- mouse->name, mouse->phys, x, y,
- left? "L": "l", middle? "M": "m",
- right? "R": "r", touch? "T": "t");
+ DBG(KERN_INFO "%s on %s: x=%d, y=%d, buttons=%s%s%s%s\n",
+ mouse->name, mouse->phys, x, y,
+ left ? "L" : "l", middle ? "M" : "m",
+ right ? "R" : "r", touch ? "T" : "t");
/*
* Report what we've found so far...
*/
- input_report_key (dev, BTN_LEFT, left);
- input_report_key (dev, BTN_MIDDLE, middle);
- input_report_key (dev, BTN_RIGHT, right);
- input_report_key (dev, BTN_TOUCH, touch);
- input_report_abs (dev, ABS_X, x);
- input_report_abs (dev, ABS_Y, y);
- input_sync (dev);
+ input_report_key(dev, BTN_LEFT, left);
+ input_report_key(dev, BTN_MIDDLE, middle);
+ input_report_key(dev, BTN_RIGHT, right);
+ input_report_key(dev, BTN_TOUCH, touch);
+ input_report_abs(dev, ABS_X, x);
+ input_report_abs(dev, ABS_Y, y);
+ input_sync(dev);
}
-static void
-vsxxxaa_handle_POR_packet (struct vsxxxaa *mouse)
+static void vsxxxaa_handle_POR_packet(struct vsxxxaa *mouse)
{
struct input_dev *dev = mouse->dev;
unsigned char *buf = mouse->buf;
@@ -356,24 +349,24 @@
* (for three buttons) of byte 0. Maybe even the bit <3>
* has some meaning if a tablet is attached.
*/
- left = (buf[0] & 0x04)? 1: 0;
- middle = (buf[0] & 0x02)? 1: 0;
- right = (buf[0] & 0x01)? 1: 0;
+ left = buf[0] & 0x04;
+ middle = buf[0] & 0x02;
+ right = buf[0] & 0x01;
- vsxxxaa_drop_bytes (mouse, 4);
- vsxxxaa_detection_done (mouse);
+ vsxxxaa_drop_bytes(mouse, 4);
+ vsxxxaa_detection_done(mouse);
if (error <= 0x1f) {
/* No (serious) error. Report buttons */
- input_report_key (dev, BTN_LEFT, left);
- input_report_key (dev, BTN_MIDDLE, middle);
- input_report_key (dev, BTN_RIGHT, right);
- input_report_key (dev, BTN_TOUCH, 0);
- input_sync (dev);
+ input_report_key(dev, BTN_LEFT, left);
+ input_report_key(dev, BTN_MIDDLE, middle);
+ input_report_key(dev, BTN_RIGHT, right);
+ input_report_key(dev, BTN_TOUCH, 0);
+ input_sync(dev);
if (error != 0)
- printk (KERN_INFO "Your %s on %s reports error=0x%02x\n",
- mouse->name, mouse->phys, error);
+ printk(KERN_INFO "Your %s on %s reports error=0x%02x\n",
+ mouse->name, mouse->phys, error);
}
@@ -381,18 +374,18 @@
* If the mouse was hot-plugged, we need to force differential mode
* now... However, give it a second to recover from it's reset.
*/
- printk (KERN_NOTICE "%s on %s: Forceing standard packet format, "
- "incremental streaming mode and 72 samples/sec\n",
- mouse->name, mouse->phys);
- serio_write (mouse->serio, 'S'); /* Standard format */
- mdelay (50);
- serio_write (mouse->serio, 'R'); /* Incremental */
- mdelay (50);
- serio_write (mouse->serio, 'L'); /* 72 samples/sec */
+ printk(KERN_NOTICE
+ "%s on %s: Forcing standard packet format, "
+ "incremental streaming mode and 72 samples/sec\n",
+ mouse->name, mouse->phys);
+ serio_write(mouse->serio, 'S'); /* Standard format */
+ mdelay(50);
+ serio_write(mouse->serio, 'R'); /* Incremental */
+ mdelay(50);
+ serio_write(mouse->serio, 'L'); /* 72 samples/sec */
}
-static void
-vsxxxaa_parse_buffer (struct vsxxxaa *mouse)
+static void vsxxxaa_parse_buffer(struct vsxxxaa *mouse)
{
unsigned char *buf = mouse->buf;
int stray_bytes;
@@ -409,122 +402,107 @@
* activity on the mouse.
*/
while (mouse->count > 0 && !IS_HDR_BYTE(buf[0])) {
- printk (KERN_ERR "%s on %s: Dropping a byte to regain "
- "sync with mouse data stream...\n",
- mouse->name, mouse->phys);
- vsxxxaa_drop_bytes (mouse, 1);
+ printk(KERN_ERR "%s on %s: Dropping a byte to regain "
+ "sync with mouse data stream...\n",
+ mouse->name, mouse->phys);
+ vsxxxaa_drop_bytes(mouse, 1);
}
/*
* Check for packets we know about.
*/
- if (vsxxxaa_smells_like_packet (mouse, VSXXXAA_PACKET_REL, 3)) {
+ if (vsxxxaa_smells_like_packet(mouse, VSXXXAA_PACKET_REL, 3)) {
/* Check for broken packet */
- stray_bytes = vsxxxaa_check_packet (mouse, 3);
- if (stray_bytes > 0) {
- printk (KERN_ERR "Dropping %d bytes now...\n",
- stray_bytes);
- vsxxxaa_drop_bytes (mouse, stray_bytes);
- continue;
- }
+ stray_bytes = vsxxxaa_check_packet(mouse, 3);
+ if (!stray_bytes)
+ vsxxxaa_handle_REL_packet(mouse);
- vsxxxaa_handle_REL_packet (mouse);
- continue; /* More to parse? */
+ } else if (vsxxxaa_smells_like_packet(mouse,
+ VSXXXAA_PACKET_ABS, 5)) {
+ /* Check for broken packet */
+ stray_bytes = vsxxxaa_check_packet(mouse, 5);
+ if (!stray_bytes)
+ vsxxxaa_handle_ABS_packet(mouse);
+
+ } else if (vsxxxaa_smells_like_packet(mouse,
+ VSXXXAA_PACKET_POR, 4)) {
+ /* Check for broken packet */
+ stray_bytes = vsxxxaa_check_packet(mouse, 4);
+ if (!stray_bytes)
+ vsxxxaa_handle_POR_packet(mouse);
+
+ } else {
+ break; /* No REL, ABS or POR packet found */
}
- if (vsxxxaa_smells_like_packet (mouse, VSXXXAA_PACKET_ABS, 5)) {
- /* Check for broken packet */
- stray_bytes = vsxxxaa_check_packet (mouse, 5);
- if (stray_bytes > 0) {
- printk (KERN_ERR "Dropping %d bytes now...\n",
- stray_bytes);
- vsxxxaa_drop_bytes (mouse, stray_bytes);
- continue;
- }
-
- vsxxxaa_handle_ABS_packet (mouse);
- continue; /* More to parse? */
+ if (stray_bytes > 0) {
+ printk(KERN_ERR "Dropping %d bytes now...\n",
+ stray_bytes);
+ vsxxxaa_drop_bytes(mouse, stray_bytes);
}
- if (vsxxxaa_smells_like_packet (mouse, VSXXXAA_PACKET_POR, 4)) {
- /* Check for broken packet */
- stray_bytes = vsxxxaa_check_packet (mouse, 4);
- if (stray_bytes > 0) {
- printk (KERN_ERR "Dropping %d bytes now...\n",
- stray_bytes);
- vsxxxaa_drop_bytes (mouse, stray_bytes);
- continue;
- }
-
- vsxxxaa_handle_POR_packet (mouse);
- continue; /* More to parse? */
- }
-
- break; /* No REL, ABS or POR packet found */
} while (1);
}
-static irqreturn_t
-vsxxxaa_interrupt (struct serio *serio, unsigned char data, unsigned int flags)
+static irqreturn_t vsxxxaa_interrupt(struct serio *serio,
+ unsigned char data, unsigned int flags)
{
- struct vsxxxaa *mouse = serio_get_drvdata (serio);
+ struct vsxxxaa *mouse = serio_get_drvdata(serio);
- vsxxxaa_queue_byte (mouse, data);
- vsxxxaa_parse_buffer (mouse);
+ vsxxxaa_queue_byte(mouse, data);
+ vsxxxaa_parse_buffer(mouse);
return IRQ_HANDLED;
}
-static void
-vsxxxaa_disconnect (struct serio *serio)
+static void vsxxxaa_disconnect(struct serio *serio)
{
- struct vsxxxaa *mouse = serio_get_drvdata (serio);
+ struct vsxxxaa *mouse = serio_get_drvdata(serio);
- serio_close (serio);
- serio_set_drvdata (serio, NULL);
- input_unregister_device (mouse->dev);
- kfree (mouse);
+ serio_close(serio);
+ serio_set_drvdata(serio, NULL);
+ input_unregister_device(mouse->dev);
+ kfree(mouse);
}
-static int
-vsxxxaa_connect (struct serio *serio, struct serio_driver *drv)
+static int vsxxxaa_connect(struct serio *serio, struct serio_driver *drv)
{
struct vsxxxaa *mouse;
struct input_dev *input_dev;
int err = -ENOMEM;
- mouse = kzalloc (sizeof (struct vsxxxaa), GFP_KERNEL);
- input_dev = input_allocate_device ();
+ mouse = kzalloc(sizeof(struct vsxxxaa), GFP_KERNEL);
+ input_dev = input_allocate_device();
if (!mouse || !input_dev)
goto fail1;
mouse->dev = input_dev;
mouse->serio = serio;
- strlcat (mouse->name, "DEC VSXXX-AA/-GA mouse or VSXXX-AB digitizer",
- sizeof (mouse->name));
- snprintf (mouse->phys, sizeof (mouse->phys), "%s/input0", serio->phys);
+ strlcat(mouse->name, "DEC VSXXX-AA/-GA mouse or VSXXX-AB digitizer",
+ sizeof(mouse->name));
+ snprintf(mouse->phys, sizeof(mouse->phys), "%s/input0", serio->phys);
input_dev->name = mouse->name;
input_dev->phys = mouse->phys;
input_dev->id.bustype = BUS_RS232;
input_dev->dev.parent = &serio->dev;
- set_bit (EV_KEY, input_dev->evbit); /* We have buttons */
- set_bit (EV_REL, input_dev->evbit);
- set_bit (EV_ABS, input_dev->evbit);
- set_bit (BTN_LEFT, input_dev->keybit); /* We have 3 buttons */
- set_bit (BTN_MIDDLE, input_dev->keybit);
- set_bit (BTN_RIGHT, input_dev->keybit);
- set_bit (BTN_TOUCH, input_dev->keybit); /* ...and Tablet */
- set_bit (REL_X, input_dev->relbit);
- set_bit (REL_Y, input_dev->relbit);
- input_set_abs_params (input_dev, ABS_X, 0, 1023, 0, 0);
- input_set_abs_params (input_dev, ABS_Y, 0, 1023, 0, 0);
+ __set_bit(EV_KEY, input_dev->evbit); /* We have buttons */
+ __set_bit(EV_REL, input_dev->evbit);
+ __set_bit(EV_ABS, input_dev->evbit);
+ __set_bit(BTN_LEFT, input_dev->keybit); /* We have 3 buttons */
+ __set_bit(BTN_MIDDLE, input_dev->keybit);
+ __set_bit(BTN_RIGHT, input_dev->keybit);
+ __set_bit(BTN_TOUCH, input_dev->keybit); /* ...and Tablet */
+ __set_bit(REL_X, input_dev->relbit);
+ __set_bit(REL_Y, input_dev->relbit);
+ input_set_abs_params(input_dev, ABS_X, 0, 1023, 0, 0);
+ input_set_abs_params(input_dev, ABS_Y, 0, 1023, 0, 0);
- serio_set_drvdata (serio, mouse);
+ serio_set_drvdata(serio, mouse);
- err = serio_open (serio, drv);
+ err = serio_open(serio, drv);
if (err)
goto fail2;
@@ -532,18 +510,18 @@
* Request selftest. Standard packet format and differential
* mode will be requested after the device ID'ed successfully.
*/
- serio_write (serio, 'T'); /* Test */
+ serio_write(serio, 'T'); /* Test */
- err = input_register_device (input_dev);
+ err = input_register_device(input_dev);
if (err)
goto fail3;
return 0;
- fail3: serio_close (serio);
- fail2: serio_set_drvdata (serio, NULL);
- fail1: input_free_device (input_dev);
- kfree (mouse);
+ fail3: serio_close(serio);
+ fail2: serio_set_drvdata(serio, NULL);
+ fail1: input_free_device(input_dev);
+ kfree(mouse);
return err;
}
@@ -570,18 +548,16 @@
.disconnect = vsxxxaa_disconnect,
};
-static int __init
-vsxxxaa_init (void)
+static int __init vsxxxaa_init(void)
{
return serio_register_driver(&vsxxxaa_drv);
}
-static void __exit
-vsxxxaa_exit (void)
+static void __exit vsxxxaa_exit(void)
{
serio_unregister_driver(&vsxxxaa_drv);
}
-module_init (vsxxxaa_init);
-module_exit (vsxxxaa_exit);
+module_init(vsxxxaa_init);
+module_exit(vsxxxaa_exit);
diff --git a/drivers/input/serio/Kconfig b/drivers/input/serio/Kconfig
index aa533ce..7e319d6 100644
--- a/drivers/input/serio/Kconfig
+++ b/drivers/input/serio/Kconfig
@@ -201,4 +201,12 @@
To compile this driver as a module, choose M here: the
module will be called xilinx_ps2.
+config SERIO_ALTERA_PS2
+ tristate "Altera UP PS/2 controller"
+ help
+ Say Y here if you have Altera University Program PS/2 ports.
+
+ To compile this driver as a module, choose M here: the
+ module will be called altera_ps2.
+
endif
diff --git a/drivers/input/serio/Makefile b/drivers/input/serio/Makefile
index 9b6c813..bf945f7 100644
--- a/drivers/input/serio/Makefile
+++ b/drivers/input/serio/Makefile
@@ -22,3 +22,4 @@
obj-$(CONFIG_SERIO_LIBPS2) += libps2.o
obj-$(CONFIG_SERIO_RAW) += serio_raw.o
obj-$(CONFIG_SERIO_XILINX_XPS_PS2) += xilinx_ps2.o
+obj-$(CONFIG_SERIO_ALTERA_PS2) += altera_ps2.o
diff --git a/drivers/input/serio/altera_ps2.c b/drivers/input/serio/altera_ps2.c
new file mode 100644
index 0000000..f479ea5
--- /dev/null
+++ b/drivers/input/serio/altera_ps2.c
@@ -0,0 +1,200 @@
+/*
+ * Altera University Program PS2 controller driver
+ *
+ * Copyright (C) 2008 Thomas Chou <thomas@wytron.com.tw>
+ *
+ * Based on sa1111ps2.c, which is:
+ * Copyright (C) 2002 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/serio.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#define DRV_NAME "altera_ps2"
+
+struct ps2if {
+ struct serio *io;
+ struct resource *iomem_res;
+ void __iomem *base;
+ unsigned irq;
+};
+
+/*
+ * Read all bytes waiting in the PS2 port. There should be
+ * at the most one, but we loop for safety.
+ */
+static irqreturn_t altera_ps2_rxint(int irq, void *dev_id)
+{
+ struct ps2if *ps2if = dev_id;
+ unsigned int status;
+ int handled = IRQ_NONE;
+
+ while ((status = readl(ps2if->base)) & 0xffff0000) {
+ serio_interrupt(ps2if->io, status & 0xff, 0);
+ handled = IRQ_HANDLED;
+ }
+
+ return handled;
+}
+
+/*
+ * Write a byte to the PS2 port.
+ */
+static int altera_ps2_write(struct serio *io, unsigned char val)
+{
+ struct ps2if *ps2if = io->port_data;
+
+ writel(val, ps2if->base);
+ return 0;
+}
+
+static int altera_ps2_open(struct serio *io)
+{
+ struct ps2if *ps2if = io->port_data;
+
+ /* clear fifo */
+ while (readl(ps2if->base) & 0xffff0000)
+ /* empty */;
+
+ writel(1, ps2if->base + 4); /* enable rx irq */
+ return 0;
+}
+
+static void altera_ps2_close(struct serio *io)
+{
+ struct ps2if *ps2if = io->port_data;
+
+ writel(0, ps2if->base); /* disable rx irq */
+}
+
+/*
+ * Add one device to this driver.
+ */
+static int altera_ps2_probe(struct platform_device *pdev)
+{
+ struct ps2if *ps2if;
+ struct serio *serio;
+ int error;
+
+ ps2if = kzalloc(sizeof(struct ps2if), GFP_KERNEL);
+ serio = kzalloc(sizeof(struct serio), GFP_KERNEL);
+ if (!ps2if || !serio) {
+ error = -ENOMEM;
+ goto err_free_mem;
+ }
+
+ serio->id.type = SERIO_8042;
+ serio->write = altera_ps2_write;
+ serio->open = altera_ps2_open;
+ serio->close = altera_ps2_close;
+ strlcpy(serio->name, dev_name(&pdev->dev), sizeof(serio->name));
+ strlcpy(serio->phys, dev_name(&pdev->dev), sizeof(serio->phys));
+ serio->port_data = ps2if;
+ serio->dev.parent = &pdev->dev;
+ ps2if->io = serio;
+
+ ps2if->iomem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (ps2if->iomem_res == NULL) {
+ error = -ENOENT;
+ goto err_free_mem;
+ }
+
+ ps2if->irq = platform_get_irq(pdev, 0);
+ if (ps2if->irq < 0) {
+ error = -ENXIO;
+ goto err_free_mem;
+ }
+
+ if (!request_mem_region(ps2if->iomem_res->start,
+ resource_size(ps2if->iomem_res), pdev->name)) {
+ error = -EBUSY;
+ goto err_free_mem;
+ }
+
+ ps2if->base = ioremap(ps2if->iomem_res->start,
+ resource_size(ps2if->iomem_res));
+ if (!ps2if->base) {
+ error = -ENOMEM;
+ goto err_free_res;
+ }
+
+ error = request_irq(ps2if->irq, altera_ps2_rxint, 0, pdev->name, ps2if);
+ if (error) {
+ dev_err(&pdev->dev, "could not allocate IRQ %d: %d\n",
+ ps2if->irq, error);
+ goto err_unmap;
+ }
+
+ dev_info(&pdev->dev, "base %p, irq %d\n", ps2if->base, ps2if->irq);
+
+ serio_register_port(ps2if->io);
+ platform_set_drvdata(pdev, ps2if);
+
+ return 0;
+
+ err_unmap:
+ iounmap(ps2if->base);
+ err_free_res:
+ release_mem_region(ps2if->iomem_res->start,
+ resource_size(ps2if->iomem_res));
+ err_free_mem:
+ kfree(ps2if);
+ kfree(serio);
+ return error;
+}
+
+/*
+ * Remove one device from this driver.
+ */
+static int altera_ps2_remove(struct platform_device *pdev)
+{
+ struct ps2if *ps2if = platform_get_drvdata(pdev);
+
+ platform_set_drvdata(pdev, NULL);
+ serio_unregister_port(ps2if->io);
+ free_irq(ps2if->irq, ps2if);
+ iounmap(ps2if->base);
+ release_mem_region(ps2if->iomem_res->start,
+ resource_size(ps2if->iomem_res));
+ kfree(ps2if);
+
+ return 0;
+}
+
+/*
+ * Our device driver structure
+ */
+static struct platform_driver altera_ps2_driver = {
+ .probe = altera_ps2_probe,
+ .remove = altera_ps2_remove,
+ .driver = {
+ .name = DRV_NAME,
+ },
+};
+
+static int __init altera_ps2_init(void)
+{
+ return platform_driver_register(&altera_ps2_driver);
+}
+
+static void __exit altera_ps2_exit(void)
+{
+ platform_driver_unregister(&altera_ps2_driver);
+}
+
+module_init(altera_ps2_init);
+module_exit(altera_ps2_exit);
+
+MODULE_DESCRIPTION("Altera University Program PS2 controller driver");
+MODULE_AUTHOR("Thomas Chou <thomas@wytron.com.tw>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRV_NAME);
diff --git a/drivers/input/serio/hp_sdc.c b/drivers/input/serio/hp_sdc.c
index 1c9410d..bcc2d30 100644
--- a/drivers/input/serio/hp_sdc.c
+++ b/drivers/input/serio/hp_sdc.c
@@ -955,7 +955,7 @@
INIT_DELAYED_WORK(&moduleloader_work, request_module_delayed);
ret = hp_sdc_init();
- /* after sucessfull initialization give SDC some time to settle
+ /* after successfull initialization give SDC some time to settle
* and then load the hp_sdc_mlc upper layer driver */
if (!ret)
schedule_delayed_work(&moduleloader_work,
diff --git a/drivers/input/serio/hp_sdc_mlc.c b/drivers/input/serio/hp_sdc_mlc.c
index 820e516..7d2b820 100644
--- a/drivers/input/serio/hp_sdc_mlc.c
+++ b/drivers/input/serio/hp_sdc_mlc.c
@@ -125,7 +125,7 @@
break;
default:
- printk(KERN_WARNING PREFIX "Unkown HIL Error status (%x)!\n", data);
+ printk(KERN_WARNING PREFIX "Unknown HIL Error status (%x)!\n", data);
break;
}
diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index 2bcf1ac..7fbffe4 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -67,10 +67,12 @@
#include <linux/dmi.h>
-static struct dmi_system_id __initdata i8042_dmi_noloop_table[] = {
+static const struct dmi_system_id __initconst i8042_dmi_noloop_table[] = {
{
- /* AUX LOOP command does not raise AUX IRQ */
- .ident = "Arima-Rioworks HDAMB",
+ /*
+ * Arima-Rioworks HDAMB -
+ * AUX LOOP command does not raise AUX IRQ
+ */
.matches = {
DMI_MATCH(DMI_BOARD_VENDOR, "RIOWORKS"),
DMI_MATCH(DMI_BOARD_NAME, "HDAMB"),
@@ -78,7 +80,7 @@
},
},
{
- .ident = "ASUS G1S",
+ /* ASUS G1S */
.matches = {
DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer Inc."),
DMI_MATCH(DMI_BOARD_NAME, "G1S"),
@@ -86,8 +88,7 @@
},
},
{
- /* AUX LOOP command does not raise AUX IRQ */
- .ident = "ASUS P65UP5",
+ /* ASUS P65UP5 - AUX LOOP command does not raise AUX IRQ */
.matches = {
DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
DMI_MATCH(DMI_BOARD_NAME, "P/I-P65UP5"),
@@ -95,7 +96,6 @@
},
},
{
- .ident = "Compaq Proliant 8500",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Compaq"),
DMI_MATCH(DMI_PRODUCT_NAME , "ProLiant"),
@@ -103,7 +103,6 @@
},
},
{
- .ident = "Compaq Proliant DL760",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Compaq"),
DMI_MATCH(DMI_PRODUCT_NAME , "ProLiant"),
@@ -111,7 +110,7 @@
},
},
{
- .ident = "OQO Model 01",
+ /* OQO Model 01 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "OQO"),
DMI_MATCH(DMI_PRODUCT_NAME, "ZEPTO"),
@@ -119,8 +118,7 @@
},
},
{
- /* AUX LOOP does not work properly */
- .ident = "ULI EV4873",
+ /* ULI EV4873 - AUX LOOP does not work properly */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "ULI"),
DMI_MATCH(DMI_PRODUCT_NAME, "EV4873"),
@@ -128,7 +126,7 @@
},
},
{
- .ident = "Microsoft Virtual Machine",
+ /* Microsoft Virtual Machine */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"),
DMI_MATCH(DMI_PRODUCT_NAME, "Virtual Machine"),
@@ -136,7 +134,7 @@
},
},
{
- .ident = "Medion MAM 2070",
+ /* Medion MAM 2070 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Notebook"),
DMI_MATCH(DMI_PRODUCT_NAME, "MAM 2070"),
@@ -144,7 +142,7 @@
},
},
{
- .ident = "Blue FB5601",
+ /* Blue FB5601 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "blue"),
DMI_MATCH(DMI_PRODUCT_NAME, "FB5601"),
@@ -152,7 +150,7 @@
},
},
{
- .ident = "Gigabyte M912",
+ /* Gigabyte M912 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "GIGABYTE"),
DMI_MATCH(DMI_PRODUCT_NAME, "M912"),
@@ -160,7 +158,6 @@
},
},
{
- .ident = "HP DV9700",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv9700"),
@@ -177,72 +174,72 @@
* ... apparently some Toshibas don't like MUX mode either and
* die horrible death on reboot.
*/
-static struct dmi_system_id __initdata i8042_dmi_nomux_table[] = {
+static const struct dmi_system_id __initconst i8042_dmi_nomux_table[] = {
{
- .ident = "Fujitsu Lifebook P7010/P7010D",
+ /* Fujitsu Lifebook P7010/P7010D */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
DMI_MATCH(DMI_PRODUCT_NAME, "P7010"),
},
},
{
- .ident = "Fujitsu Lifebook P7010",
+ /* Fujitsu Lifebook P7010 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
DMI_MATCH(DMI_PRODUCT_NAME, "0000000000"),
},
},
{
- .ident = "Fujitsu Lifebook P5020D",
+ /* Fujitsu Lifebook P5020D */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook P Series"),
},
},
{
- .ident = "Fujitsu Lifebook S2000",
+ /* Fujitsu Lifebook S2000 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook S Series"),
},
},
{
- .ident = "Fujitsu Lifebook S6230",
+ /* Fujitsu Lifebook S6230 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook S6230"),
},
},
{
- .ident = "Fujitsu T70H",
+ /* Fujitsu T70H */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
DMI_MATCH(DMI_PRODUCT_NAME, "FMVLT70H"),
},
},
{
- .ident = "Fujitsu-Siemens Lifebook T3010",
+ /* Fujitsu-Siemens Lifebook T3010 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK T3010"),
},
},
{
- .ident = "Fujitsu-Siemens Lifebook E4010",
+ /* Fujitsu-Siemens Lifebook E4010 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK E4010"),
},
},
{
- .ident = "Fujitsu-Siemens Amilo Pro 2010",
+ /* Fujitsu-Siemens Amilo Pro 2010 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pro V2010"),
},
},
{
- .ident = "Fujitsu-Siemens Amilo Pro 2030",
+ /* Fujitsu-Siemens Amilo Pro 2030 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
DMI_MATCH(DMI_PRODUCT_NAME, "AMILO PRO V2030"),
@@ -253,7 +250,7 @@
* No data is coming from the touchscreen unless KBC
* is in legacy mode.
*/
- .ident = "Panasonic CF-29",
+ /* Panasonic CF-29 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Matsushita"),
DMI_MATCH(DMI_PRODUCT_NAME, "CF-29"),
@@ -261,10 +258,10 @@
},
{
/*
- * Errors on MUX ports are reported without raising AUXDATA
+ * HP Pavilion DV4017EA -
+ * errors on MUX ports are reported without raising AUXDATA
* causing "spurious NAK" messages.
*/
- .ident = "HP Pavilion DV4017EA",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
DMI_MATCH(DMI_PRODUCT_NAME, "Pavilion dv4000 (EA032EA#ABF)"),
@@ -272,9 +269,9 @@
},
{
/*
- * Like DV4017EA does not raise AUXERR for errors on MUX ports.
+ * HP Pavilion ZT1000 -
+ * like DV4017EA does not raise AUXERR for errors on MUX ports.
*/
- .ident = "HP Pavilion ZT1000",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion Notebook PC"),
@@ -283,44 +280,41 @@
},
{
/*
- * Like DV4017EA does not raise AUXERR for errors on MUX ports.
+ * HP Pavilion DV4270ca -
+ * like DV4017EA does not raise AUXERR for errors on MUX ports.
*/
- .ident = "HP Pavilion DV4270ca",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
DMI_MATCH(DMI_PRODUCT_NAME, "Pavilion dv4000 (EH476UA#ABL)"),
},
},
{
- .ident = "Toshiba P10",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
DMI_MATCH(DMI_PRODUCT_NAME, "Satellite P10"),
},
},
{
- .ident = "Toshiba Equium A110",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
DMI_MATCH(DMI_PRODUCT_NAME, "EQUIUM A110"),
},
},
{
- .ident = "Alienware Sentia",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "ALIENWARE"),
DMI_MATCH(DMI_PRODUCT_NAME, "Sentia"),
},
},
{
- .ident = "Sharp Actius MM20",
+ /* Sharp Actius MM20 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "SHARP"),
DMI_MATCH(DMI_PRODUCT_NAME, "PC-MM20 Series"),
},
},
{
- .ident = "Sony Vaio FS-115b",
+ /* Sony Vaio FS-115b */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FS115B"),
@@ -328,73 +322,72 @@
},
{
/*
- * Reset and GET ID commands issued via KBD port are
+ * Sony Vaio FZ-240E -
+ * reset and GET ID commands issued via KBD port are
* sometimes being delivered to AUX3.
*/
- .ident = "Sony Vaio FZ-240E",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FZ240E"),
},
},
{
- .ident = "Amoi M636/A737",
+ /* Amoi M636/A737 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Amoi Electronics CO.,LTD."),
DMI_MATCH(DMI_PRODUCT_NAME, "M636/A737 platform"),
},
},
{
- .ident = "Lenovo 3000 n100",
+ /* Lenovo 3000 n100 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
DMI_MATCH(DMI_PRODUCT_NAME, "076804U"),
},
},
{
- .ident = "Acer Aspire 1360",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 1360"),
},
},
{
- .ident = "Gericom Bellagio",
+ /* Gericom Bellagio */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Gericom"),
DMI_MATCH(DMI_PRODUCT_NAME, "N34AS6"),
},
},
{
- .ident = "IBM 2656",
+ /* IBM 2656 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "IBM"),
DMI_MATCH(DMI_PRODUCT_NAME, "2656"),
},
},
{
- .ident = "Dell XPS M1530",
+ /* Dell XPS M1530 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
DMI_MATCH(DMI_PRODUCT_NAME, "XPS M1530"),
},
},
{
- .ident = "Compal HEL80I",
+ /* Compal HEL80I */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "COMPAL"),
DMI_MATCH(DMI_PRODUCT_NAME, "HEL80I"),
},
},
{
- .ident = "Dell Vostro 1510",
+ /* Dell Vostro 1510 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
DMI_MATCH(DMI_PRODUCT_NAME, "Vostro1510"),
},
},
{
- .ident = "Acer Aspire 5536",
+ /* Acer Aspire 5536 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5536"),
@@ -404,65 +397,65 @@
{ }
};
-static struct dmi_system_id __initdata i8042_dmi_reset_table[] = {
+static const struct dmi_system_id __initconst i8042_dmi_reset_table[] = {
{
- .ident = "MSI Wind U-100",
+ /* MSI Wind U-100 */
.matches = {
DMI_MATCH(DMI_BOARD_NAME, "U-100"),
DMI_MATCH(DMI_BOARD_VENDOR, "MICRO-STAR INTERNATIONAL CO., LTD"),
},
},
{
- .ident = "LG Electronics X110",
+ /* LG Electronics X110 */
.matches = {
DMI_MATCH(DMI_BOARD_NAME, "X110"),
DMI_MATCH(DMI_BOARD_VENDOR, "LG Electronics Inc."),
},
},
{
- .ident = "Acer Aspire One 150",
+ /* Acer Aspire One 150 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
DMI_MATCH(DMI_PRODUCT_NAME, "AOA150"),
},
},
{
- .ident = "Advent 4211",
+ /* Advent 4211 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "DIXONSXP"),
DMI_MATCH(DMI_PRODUCT_NAME, "Advent 4211"),
},
},
{
- .ident = "Medion Akoya Mini E1210",
+ /* Medion Akoya Mini E1210 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "MEDION"),
DMI_MATCH(DMI_PRODUCT_NAME, "E1210"),
},
},
{
- .ident = "Mivvy M310",
+ /* Mivvy M310 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "VIOOO"),
DMI_MATCH(DMI_PRODUCT_NAME, "N10"),
},
},
{
- .ident = "Dell Vostro 1320",
+ /* Dell Vostro 1320 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
DMI_MATCH(DMI_PRODUCT_NAME, "Vostro 1320"),
},
},
{
- .ident = "Dell Vostro 1520",
+ /* Dell Vostro 1520 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
DMI_MATCH(DMI_PRODUCT_NAME, "Vostro 1520"),
},
},
{
- .ident = "Dell Vostro 1720",
+ /* Dell Vostro 1720 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
DMI_MATCH(DMI_PRODUCT_NAME, "Vostro 1720"),
@@ -472,16 +465,16 @@
};
#ifdef CONFIG_PNP
-static struct dmi_system_id __initdata i8042_dmi_nopnp_table[] = {
+static const struct dmi_system_id __initconst i8042_dmi_nopnp_table[] = {
{
- .ident = "Intel MBO Desktop D845PESV",
+ /* Intel MBO Desktop D845PESV */
.matches = {
DMI_MATCH(DMI_BOARD_NAME, "D845PESV"),
DMI_MATCH(DMI_BOARD_VENDOR, "Intel Corporation"),
},
},
{
- .ident = "MSI Wind U-100",
+ /* MSI Wind U-100 */
.matches = {
DMI_MATCH(DMI_BOARD_NAME, "U-100"),
DMI_MATCH(DMI_BOARD_VENDOR, "MICRO-STAR INTERNATIONAL CO., LTD"),
@@ -490,27 +483,23 @@
{ }
};
-static struct dmi_system_id __initdata i8042_dmi_laptop_table[] = {
+static const struct dmi_system_id __initconst i8042_dmi_laptop_table[] = {
{
- .ident = "Portable",
.matches = {
DMI_MATCH(DMI_CHASSIS_TYPE, "8"), /* Portable */
},
},
{
- .ident = "Laptop",
.matches = {
DMI_MATCH(DMI_CHASSIS_TYPE, "9"), /* Laptop */
},
},
{
- .ident = "Notebook",
.matches = {
DMI_MATCH(DMI_CHASSIS_TYPE, "10"), /* Notebook */
},
},
{
- .ident = "Sub-Notebook",
.matches = {
DMI_MATCH(DMI_CHASSIS_TYPE, "14"), /* Sub-Notebook */
},
@@ -525,58 +514,58 @@
* Originally, this was just confined to older laptops, but a few Acer laptops
* have turned up in 2007 that also need this again.
*/
-static struct dmi_system_id __initdata i8042_dmi_dritek_table[] = {
+static const struct dmi_system_id __initconst i8042_dmi_dritek_table[] = {
{
- .ident = "Acer Aspire 5630",
+ /* Acer Aspire 5630 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5630"),
},
},
{
- .ident = "Acer Aspire 5650",
+ /* Acer Aspire 5650 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5650"),
},
},
{
- .ident = "Acer Aspire 5680",
+ /* Acer Aspire 5680 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5680"),
},
},
{
- .ident = "Acer Aspire 5720",
+ /* Acer Aspire 5720 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5720"),
},
},
{
- .ident = "Acer Aspire 9110",
+ /* Acer Aspire 9110 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 9110"),
},
},
{
- .ident = "Acer TravelMate 660",
+ /* Acer TravelMate 660 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 660"),
},
},
{
- .ident = "Acer TravelMate 2490",
+ /* Acer TravelMate 2490 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 2490"),
},
},
{
- .ident = "Acer TravelMate 4280",
+ /* Acer TravelMate 4280 */
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 4280"),
diff --git a/drivers/input/sparse-keymap.c b/drivers/input/sparse-keymap.c
new file mode 100644
index 0000000..fbd3987
--- /dev/null
+++ b/drivers/input/sparse-keymap.c
@@ -0,0 +1,250 @@
+/*
+ * Generic support for sparse keymaps
+ *
+ * Copyright (c) 2009 Dmitry Torokhov
+ *
+ * Derived from wistron button driver:
+ * Copyright (C) 2005 Miloslav Trmac <mitr@volny.cz>
+ * Copyright (C) 2005 Bernhard Rosenkraenzer <bero@arklinux.org>
+ * Copyright (C) 2005 Dmitry Torokhov <dtor@mail.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/input.h>
+#include <linux/input/sparse-keymap.h>
+
+MODULE_AUTHOR("Dmitry Torokhov <dtor@mail.ru>");
+MODULE_DESCRIPTION("Generic support for sparse keymaps");
+MODULE_LICENSE("GPL v2");
+MODULE_VERSION("0.1");
+
+/**
+ * sparse_keymap_entry_from_scancode - perform sparse keymap lookup
+ * @dev: Input device using sparse keymap
+ * @code: Scan code
+ *
+ * This function is used to perform &struct key_entry lookup in an
+ * input device using sparse keymap.
+ */
+struct key_entry *sparse_keymap_entry_from_scancode(struct input_dev *dev,
+ unsigned int code)
+{
+ struct key_entry *key;
+
+ for (key = dev->keycode; key->type != KE_END; key++)
+ if (code == key->code)
+ return key;
+
+ return NULL;
+}
+EXPORT_SYMBOL(sparse_keymap_entry_from_scancode);
+
+/**
+ * sparse_keymap_entry_from_keycode - perform sparse keymap lookup
+ * @dev: Input device using sparse keymap
+ * @keycode: Key code
+ *
+ * This function is used to perform &struct key_entry lookup in an
+ * input device using sparse keymap.
+ */
+struct key_entry *sparse_keymap_entry_from_keycode(struct input_dev *dev,
+ unsigned int keycode)
+{
+ struct key_entry *key;
+
+ for (key = dev->keycode; key->type != KE_END; key++)
+ if (key->type == KE_KEY && keycode == key->keycode)
+ return key;
+
+ return NULL;
+}
+EXPORT_SYMBOL(sparse_keymap_entry_from_keycode);
+
+static int sparse_keymap_getkeycode(struct input_dev *dev,
+ int scancode, int *keycode)
+{
+ const struct key_entry *key =
+ sparse_keymap_entry_from_scancode(dev, scancode);
+
+ if (key && key->type == KE_KEY) {
+ *keycode = key->keycode;
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static int sparse_keymap_setkeycode(struct input_dev *dev,
+ int scancode, int keycode)
+{
+ struct key_entry *key;
+ int old_keycode;
+
+ if (keycode < 0 || keycode > KEY_MAX)
+ return -EINVAL;
+
+ key = sparse_keymap_entry_from_scancode(dev, scancode);
+ if (key && key->type == KE_KEY) {
+ old_keycode = key->keycode;
+ key->keycode = keycode;
+ set_bit(keycode, dev->keybit);
+ if (!sparse_keymap_entry_from_keycode(dev, old_keycode))
+ clear_bit(old_keycode, dev->keybit);
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+/**
+ * sparse_keymap_setup - set up sparse keymap for an input device
+ * @dev: Input device
+ * @keymap: Keymap in form of array of &key_entry structures ending
+ * with %KE_END type entry
+ * @setup: Function that can be used to adjust keymap entries
+ * depending on device's deeds, may be %NULL
+ *
+ * The function calculates size and allocates copy of the original
+ * keymap after which sets up input device event bits appropriately.
+ * Before destroying input device allocated keymap should be freed
+ * with a call to sparse_keymap_free().
+ */
+int sparse_keymap_setup(struct input_dev *dev,
+ const struct key_entry *keymap,
+ int (*setup)(struct input_dev *, struct key_entry *))
+{
+ size_t map_size = 1; /* to account for the last KE_END entry */
+ const struct key_entry *e;
+ struct key_entry *map, *entry;
+ int i;
+ int error;
+
+ for (e = keymap; e->type != KE_END; e++)
+ map_size++;
+
+ map = kcalloc(map_size, sizeof (struct key_entry), GFP_KERNEL);
+ if (!map)
+ return -ENOMEM;
+
+ memcpy(map, keymap, map_size * sizeof (struct key_entry));
+
+ for (i = 0; i < map_size; i++) {
+ entry = &map[i];
+
+ if (setup) {
+ error = setup(dev, entry);
+ if (error)
+ goto err_out;
+ }
+
+ switch (entry->type) {
+ case KE_KEY:
+ __set_bit(EV_KEY, dev->evbit);
+ __set_bit(entry->keycode, dev->keybit);
+ break;
+
+ case KE_SW:
+ __set_bit(EV_SW, dev->evbit);
+ __set_bit(entry->sw.code, dev->swbit);
+ break;
+ }
+ }
+
+ dev->keycode = map;
+ dev->keycodemax = map_size;
+ dev->getkeycode = sparse_keymap_getkeycode;
+ dev->setkeycode = sparse_keymap_setkeycode;
+
+ return 0;
+
+ err_out:
+ kfree(keymap);
+ return error;
+
+}
+EXPORT_SYMBOL(sparse_keymap_setup);
+
+/**
+ * sparse_keymap_free - free memory allocated for sparse keymap
+ * @dev: Input device using sparse keymap
+ *
+ * This function is used to free memory allocated by sparse keymap
+ * in an input device that was set up by sparse_keymap_setup().
+ */
+void sparse_keymap_free(struct input_dev *dev)
+{
+ kfree(dev->keycode);
+ dev->keycode = NULL;
+ dev->keycodemax = 0;
+ dev->getkeycode = NULL;
+ dev->setkeycode = NULL;
+}
+EXPORT_SYMBOL(sparse_keymap_free);
+
+/**
+ * sparse_keymap_report_entry - report event corresponding to given key entry
+ * @dev: Input device for which event should be reported
+ * @ke: key entry describing event
+ * @value: Value that should be reported (ignored by %KE_SW entries)
+ * @autorelease: Signals whether release event should be emitted for %KE_KEY
+ * entries right after reporting press event, ignored by all other
+ * entries
+ *
+ * This function is used to report input event described by given
+ * &struct key_entry.
+ */
+void sparse_keymap_report_entry(struct input_dev *dev, const struct key_entry *ke,
+ unsigned int value, bool autorelease)
+{
+ switch (ke->type) {
+ case KE_KEY:
+ input_report_key(dev, ke->keycode, value);
+ input_sync(dev);
+ if (value && autorelease) {
+ input_report_key(dev, ke->keycode, 0);
+ input_sync(dev);
+ }
+ break;
+
+ case KE_SW:
+ value = ke->sw.value;
+ /* fall through */
+
+ case KE_VSW:
+ input_report_switch(dev, ke->sw.code, value);
+ break;
+ }
+}
+EXPORT_SYMBOL(sparse_keymap_report_entry);
+
+/**
+ * sparse_keymap_report_event - report event corresponding to given scancode
+ * @dev: Input device using sparse keymap
+ * @code: Scan code
+ * @value: Value that should be reported (ignored by %KE_SW entries)
+ * @autorelease: Signals whether release event should be emitted for %KE_KEY
+ * entries right after reporting press event, ignored by all other
+ * entries
+ *
+ * This function is used to perform lookup in an input device using sparse
+ * keymap and report corresponding event. Returns %true if lookup was
+ * successful and %false otherwise.
+ */
+bool sparse_keymap_report_event(struct input_dev *dev, unsigned int code,
+ unsigned int value, bool autorelease)
+{
+ const struct key_entry *ke =
+ sparse_keymap_entry_from_scancode(dev, code);
+
+ if (ke) {
+ sparse_keymap_report_entry(dev, ke, value, autorelease);
+ return true;
+ }
+
+ return false;
+}
+EXPORT_SYMBOL(sparse_keymap_report_event);
+
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 8cc453c..32fc8ba 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -111,6 +111,18 @@
Say Y here to enable the support for the touchscreen found
on Dialog Semiconductor DA9034 PMIC.
+config TOUCHSCREEN_DYNAPRO
+ tristate "Dynapro serial touchscreen"
+ select SERIO
+ help
+ Say Y here if you have a Dynapro serial touchscreen connected to
+ your system.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called dynapro.
+
config TOUCHSCREEN_EETI
tristate "EETI touchscreen panel support"
depends on I2C
@@ -133,6 +145,18 @@
To compile this driver as a module, choose M here: the
module will be called fujitsu-ts.
+config TOUCHSCREEN_S3C2410
+ tristate "Samsung S3C2410 touchscreen input driver"
+ depends on ARCH_S3C2410
+ select S3C24XX_ADC
+ help
+ Say Y here if you have the s3c2410 touchscreen.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called s3c2410_ts.
+
config TOUCHSCREEN_GUNZE
tristate "Gunze AHL-51S touchscreen"
select SERIO
@@ -297,7 +321,7 @@
config TOUCHSCREEN_ATMEL_TSADCC
tristate "Atmel Touchscreen Interface"
- depends on ARCH_AT91SAM9RL
+ depends on ARCH_AT91SAM9RL || ARCH_AT91SAM9G45
help
Say Y here if you have a 4-wire touchscreen connected to the
ADC Controller on your Atmel SoC (such as the AT91SAM9RL).
@@ -418,6 +442,7 @@
- IdealTEK URTC1000
- GoTop Super_Q2/GogoPen/PenPower tablets
- JASTEC USB Touch Controller/DigiTech DTR-02U
+ - Zytronic controllers
Have a look at <http://linux.chapter7.ch/touchkit/> for
a usage description and the required user-space stuff.
@@ -490,6 +515,16 @@
bool "e2i Touchscreen controller (e.g. from Mimo 740)"
depends on TOUCHSCREEN_USB_COMPOSITE
+config TOUCHSCREEN_USB_ZYTRONIC
+ default y
+ bool "Zytronic controller" if EMBEDDED
+ depends on TOUCHSCREEN_USB_COMPOSITE
+
+config TOUCHSCREEN_USB_ETT_TC5UH
+ default y
+ bool "ET&T TC5UH touchscreen controler support" if EMBEDDED
+ depends on TOUCHSCREEN_USB_COMPOSITE
+
config TOUCHSCREEN_TOUCHIT213
tristate "Sahara TouchIT-213 touchscreen"
select SERIO
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index 15fa62c..f1f59c9 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -12,6 +12,7 @@
obj-$(CONFIG_TOUCHSCREEN_ATMEL_TSADCC) += atmel_tsadcc.o
obj-$(CONFIG_TOUCHSCREEN_BITSY) += h3600_ts_input.o
obj-$(CONFIG_TOUCHSCREEN_CORGI) += corgi_ts.o
+obj-$(CONFIG_TOUCHSCREEN_DYNAPRO) += dynapro.o
obj-$(CONFIG_TOUCHSCREEN_GUNZE) += gunze.o
obj-$(CONFIG_TOUCHSCREEN_EETI) += eeti_ts.o
obj-$(CONFIG_TOUCHSCREEN_ELO) += elo.o
@@ -25,7 +26,9 @@
obj-$(CONFIG_TOUCHSCREEN_HP7XX) += jornada720_ts.o
obj-$(CONFIG_TOUCHSCREEN_HTCPEN) += htcpen.o
obj-$(CONFIG_TOUCHSCREEN_USB_COMPOSITE) += usbtouchscreen.o
+obj-$(CONFIG_TOUCHSCREEN_PCAP) += pcap_ts.o
obj-$(CONFIG_TOUCHSCREEN_PENMOUNT) += penmount.o
+obj-$(CONFIG_TOUCHSCREEN_S3C2410) += s3c2410_ts.o
obj-$(CONFIG_TOUCHSCREEN_TOUCHIT213) += touchit213.o
obj-$(CONFIG_TOUCHSCREEN_TOUCHRIGHT) += touchright.o
obj-$(CONFIG_TOUCHSCREEN_TOUCHWIN) += touchwin.o
@@ -41,4 +44,3 @@
obj-$(CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE) += mainstone-wm97xx.o
obj-$(CONFIG_TOUCHSCREEN_WM97XX_ZYLONITE) += zylonite-wm97xx.o
obj-$(CONFIG_TOUCHSCREEN_W90X900) += w90p910_ts.o
-obj-$(CONFIG_TOUCHSCREEN_PCAP) += pcap_ts.o
diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index 09c8109..52d2ca1 100644
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -29,10 +29,9 @@
#include <linux/spi/ads7846.h>
#include <asm/irq.h>
-
/*
* This code has been heavily tested on a Nokia 770, and lightly
- * tested on other ads7846 devices (OSK/Mistral, Lubbock).
+ * tested on other ads7846 devices (OSK/Mistral, Lubbock, Spitz).
* TSC2046 is just newer ads7846 silicon.
* Support for ads7843 tested on Atmel at91sam926x-EK.
* Support for ads7845 has only been stubbed in.
@@ -43,7 +42,7 @@
* have to maintain our own SW IRQ disabled status. This should be
* removed as soon as the affected platform's IRQ handling is fixed.
*
- * app note sbaa036 talks in more detail about accurate sampling...
+ * App note sbaa036 talks in more detail about accurate sampling...
* that ought to help in situations like LCDs inducing noise (which
* can also be helped by using synch signals) and more generally.
* This driver tries to utilize the measures described in the app
@@ -566,10 +565,8 @@
* once more the measurement
*/
if (packet->tc.ignore || Rt > ts->pressure_max) {
-#ifdef VERBOSE
- pr_debug("%s: ignored %d pressure %d\n",
- dev_name(&ts->spi->dev), packet->tc.ignore, Rt);
-#endif
+ dev_vdbg(&ts->spi->dev, "ignored %d pressure %d\n",
+ packet->tc.ignore, Rt);
hrtimer_start(&ts->timer, ktime_set(0, TS_POLL_PERIOD),
HRTIMER_MODE_REL);
return;
@@ -598,9 +595,7 @@
if (!ts->pendown) {
input_report_key(input, BTN_TOUCH, 1);
ts->pendown = 1;
-#ifdef VERBOSE
- dev_dbg(&ts->spi->dev, "DOWN\n");
-#endif
+ dev_vdbg(&ts->spi->dev, "DOWN\n");
}
if (ts->swap_xy)
@@ -608,12 +603,10 @@
input_report_abs(input, ABS_X, x);
input_report_abs(input, ABS_Y, y);
- input_report_abs(input, ABS_PRESSURE, Rt);
+ input_report_abs(input, ABS_PRESSURE, ts->pressure_max - Rt);
input_sync(input);
-#ifdef VERBOSE
- dev_dbg(&ts->spi->dev, "%4d/%4d/%4d\n", x, y, Rt);
-#endif
+ dev_vdbg(&ts->spi->dev, "%4d/%4d/%4d\n", x, y, Rt);
}
hrtimer_start(&ts->timer, ktime_set(0, TS_POLL_PERIOD),
@@ -723,9 +716,7 @@
input_sync(input);
ts->pendown = 0;
-#ifdef VERBOSE
- dev_dbg(&ts->spi->dev, "UP\n");
-#endif
+ dev_vdbg(&ts->spi->dev, "UP\n");
}
/* measurement cycle ended */
diff --git a/drivers/input/touchscreen/atmel-wm97xx.c b/drivers/input/touchscreen/atmel-wm97xx.c
index 35377f5..a12242f 100644
--- a/drivers/input/touchscreen/atmel-wm97xx.c
+++ b/drivers/input/touchscreen/atmel-wm97xx.c
@@ -59,7 +59,7 @@
#define ATMEL_WM97XX_AC97C_IRQ (29)
#define ATMEL_WM97XX_GPIO_DEFAULT (32+16) /* Pin 16 on port B. */
#else
-#error Unkown CPU, this driver only supports AT32AP700X CPUs.
+#error Unknown CPU, this driver only supports AT32AP700X CPUs.
#endif
struct continuous {
diff --git a/drivers/input/touchscreen/atmel_tsadcc.c b/drivers/input/touchscreen/atmel_tsadcc.c
index 9c7fce4..3d9b516 100644
--- a/drivers/input/touchscreen/atmel_tsadcc.c
+++ b/drivers/input/touchscreen/atmel_tsadcc.c
@@ -22,6 +22,8 @@
#include <linux/clk.h>
#include <linux/platform_device.h>
#include <linux/io.h>
+#include <mach/board.h>
+#include <mach/cpu.h>
/* Register definitions based on AT91SAM9RL64 preliminary draft datasheet */
@@ -36,7 +38,9 @@
#define ATMEL_TSADCC_LOWRES (1 << 4) /* Resolution selection */
#define ATMEL_TSADCC_SLEEP (1 << 5) /* Sleep mode */
#define ATMEL_TSADCC_PENDET (1 << 6) /* Pen Detect selection */
+#define ATMEL_TSADCC_PRES (1 << 7) /* Pressure Measurement Selection */
#define ATMEL_TSADCC_PRESCAL (0x3f << 8) /* Prescalar Rate Selection */
+#define ATMEL_TSADCC_EPRESCAL (0xff << 8) /* Prescalar Rate Selection (Extended) */
#define ATMEL_TSADCC_STARTUP (0x7f << 16) /* Start Up time */
#define ATMEL_TSADCC_SHTIM (0xf << 24) /* Sample & Hold time */
#define ATMEL_TSADCC_PENDBC (0xf << 28) /* Pen Detect debouncing time */
@@ -84,7 +88,13 @@
#define ATMEL_TSADCC_CDR4 0x40 /* Channel Data 4 */
#define ATMEL_TSADCC_CDR5 0x44 /* Channel Data 5 */
-#define ADC_CLOCK 1000000
+#define ATMEL_TSADCC_XPOS 0x50
+#define ATMEL_TSADCC_Z1DAT 0x54
+#define ATMEL_TSADCC_Z2DAT 0x58
+
+#define PRESCALER_VAL(x) ((x) >> 8)
+
+#define ADC_DEFAULT_CLOCK 100000
struct atmel_tsadcc {
struct input_dev *input;
@@ -172,6 +182,7 @@
struct atmel_tsadcc *ts_dev;
struct input_dev *input_dev;
struct resource *res;
+ struct at91_tsadcc_data *pdata = pdev->dev.platform_data;
int err = 0;
unsigned int prsc;
unsigned int reg;
@@ -242,31 +253,49 @@
input_dev->phys = ts_dev->phys;
input_dev->dev.parent = &pdev->dev;
- input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
- input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
-
+ __set_bit(EV_ABS, input_dev->evbit);
input_set_abs_params(input_dev, ABS_X, 0, 0x3FF, 0, 0);
input_set_abs_params(input_dev, ABS_Y, 0, 0x3FF, 0, 0);
+ input_set_capability(input_dev, EV_KEY, BTN_TOUCH);
+
/* clk_enable() always returns 0, no need to check it */
clk_enable(ts_dev->clk);
prsc = clk_get_rate(ts_dev->clk);
dev_info(&pdev->dev, "Master clock is set at: %d Hz\n", prsc);
- prsc = prsc / ADC_CLOCK / 2 - 1;
+ if (!pdata)
+ goto err_fail;
+
+ if (!pdata->adc_clock)
+ pdata->adc_clock = ADC_DEFAULT_CLOCK;
+
+ prsc = (prsc / (2 * pdata->adc_clock)) - 1;
+
+ /* saturate if this value is too high */
+ if (cpu_is_at91sam9rl()) {
+ if (prsc > PRESCALER_VAL(ATMEL_TSADCC_PRESCAL))
+ prsc = PRESCALER_VAL(ATMEL_TSADCC_PRESCAL);
+ } else {
+ if (prsc > PRESCALER_VAL(ATMEL_TSADCC_EPRESCAL))
+ prsc = PRESCALER_VAL(ATMEL_TSADCC_EPRESCAL);
+ }
+
+ dev_info(&pdev->dev, "Prescaler is set at: %d\n", prsc);
reg = ATMEL_TSADCC_TSAMOD_TS_ONLY_MODE |
((0x00 << 5) & ATMEL_TSADCC_SLEEP) | /* Normal Mode */
((0x01 << 6) & ATMEL_TSADCC_PENDET) | /* Enable Pen Detect */
- ((prsc << 8) & ATMEL_TSADCC_PRESCAL) | /* PRESCAL */
- ((0x13 << 16) & ATMEL_TSADCC_STARTUP) | /* STARTUP */
- ((0x0F << 28) & ATMEL_TSADCC_PENDBC); /* PENDBC */
+ (prsc << 8) |
+ ((0x26 << 16) & ATMEL_TSADCC_STARTUP) |
+ ((pdata->pendet_debounce << 28) & ATMEL_TSADCC_PENDBC);
atmel_tsadcc_write(ATMEL_TSADCC_CR, ATMEL_TSADCC_SWRST);
atmel_tsadcc_write(ATMEL_TSADCC_MR, reg);
atmel_tsadcc_write(ATMEL_TSADCC_TRGR, ATMEL_TSADCC_TRGMOD_NONE);
- atmel_tsadcc_write(ATMEL_TSADCC_TSR, (0x3 << 24) & ATMEL_TSADCC_TSSHTIM);
+ atmel_tsadcc_write(ATMEL_TSADCC_TSR,
+ (pdata->ts_sample_hold_time << 24) & ATMEL_TSADCC_TSSHTIM);
atmel_tsadcc_read(ATMEL_TSADCC_SR);
atmel_tsadcc_write(ATMEL_TSADCC_IER, ATMEL_TSADCC_PENCNT);
diff --git a/drivers/input/touchscreen/dynapro.c b/drivers/input/touchscreen/dynapro.c
new file mode 100644
index 0000000..4553539
--- /dev/null
+++ b/drivers/input/touchscreen/dynapro.c
@@ -0,0 +1,206 @@
+/*
+ * Dynapro serial touchscreen driver
+ *
+ * Copyright (c) 2009 Tias Guns
+ * Based on the inexio driver (c) Vojtech Pavlik and Dan Streetman and
+ * Richard Lemon
+ *
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+/*
+ * 2009/09/19 Tias Guns <tias@ulyssis.org>
+ * Copied inexio.c and edited for Dynapro protocol (from retired Xorg module)
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/serio.h>
+#include <linux/init.h>
+
+#define DRIVER_DESC "Dynapro serial touchscreen driver"
+
+MODULE_AUTHOR("Tias Guns <tias@ulyssis.org>");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+/*
+ * Definitions & global arrays.
+ */
+
+#define DYNAPRO_FORMAT_TOUCH_BIT 0x40
+#define DYNAPRO_FORMAT_LENGTH 3
+#define DYNAPRO_RESPONSE_BEGIN_BYTE 0x80
+
+#define DYNAPRO_MIN_XC 0
+#define DYNAPRO_MAX_XC 0x3ff
+#define DYNAPRO_MIN_YC 0
+#define DYNAPRO_MAX_YC 0x3ff
+
+#define DYNAPRO_GET_XC(data) (data[1] | ((data[0] & 0x38) << 4))
+#define DYNAPRO_GET_YC(data) (data[2] | ((data[0] & 0x07) << 7))
+#define DYNAPRO_GET_TOUCHED(data) (DYNAPRO_FORMAT_TOUCH_BIT & data[0])
+
+/*
+ * Per-touchscreen data.
+ */
+
+struct dynapro {
+ struct input_dev *dev;
+ struct serio *serio;
+ int idx;
+ unsigned char data[DYNAPRO_FORMAT_LENGTH];
+ char phys[32];
+};
+
+static void dynapro_process_data(struct dynapro *pdynapro)
+{
+ struct input_dev *dev = pdynapro->dev;
+
+ if (DYNAPRO_FORMAT_LENGTH == ++pdynapro->idx) {
+ input_report_abs(dev, ABS_X, DYNAPRO_GET_XC(pdynapro->data));
+ input_report_abs(dev, ABS_Y, DYNAPRO_GET_YC(pdynapro->data));
+ input_report_key(dev, BTN_TOUCH,
+ DYNAPRO_GET_TOUCHED(pdynapro->data));
+ input_sync(dev);
+
+ pdynapro->idx = 0;
+ }
+}
+
+static irqreturn_t dynapro_interrupt(struct serio *serio,
+ unsigned char data, unsigned int flags)
+{
+ struct dynapro *pdynapro = serio_get_drvdata(serio);
+
+ pdynapro->data[pdynapro->idx] = data;
+
+ if (DYNAPRO_RESPONSE_BEGIN_BYTE & pdynapro->data[0])
+ dynapro_process_data(pdynapro);
+ else
+ dev_dbg(&serio->dev, "unknown/unsynchronized data: %x\n",
+ pdynapro->data[0]);
+
+ return IRQ_HANDLED;
+}
+
+static void dynapro_disconnect(struct serio *serio)
+{
+ struct dynapro *pdynapro = serio_get_drvdata(serio);
+
+ input_get_device(pdynapro->dev);
+ input_unregister_device(pdynapro->dev);
+ serio_close(serio);
+ serio_set_drvdata(serio, NULL);
+ input_put_device(pdynapro->dev);
+ kfree(pdynapro);
+}
+
+/*
+ * dynapro_connect() is the routine that is called when someone adds a
+ * new serio device that supports dynapro protocol and registers it as
+ * an input device. This is usually accomplished using inputattach.
+ */
+
+static int dynapro_connect(struct serio *serio, struct serio_driver *drv)
+{
+ struct dynapro *pdynapro;
+ struct input_dev *input_dev;
+ int err;
+
+ pdynapro = kzalloc(sizeof(struct dynapro), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!pdynapro || !input_dev) {
+ err = -ENOMEM;
+ goto fail1;
+ }
+
+ pdynapro->serio = serio;
+ pdynapro->dev = input_dev;
+ snprintf(pdynapro->phys, sizeof(pdynapro->phys),
+ "%s/input0", serio->phys);
+
+ input_dev->name = "Dynapro Serial TouchScreen";
+ input_dev->phys = pdynapro->phys;
+ input_dev->id.bustype = BUS_RS232;
+ input_dev->id.vendor = SERIO_DYNAPRO;
+ input_dev->id.product = 0;
+ input_dev->id.version = 0x0001;
+ input_dev->dev.parent = &serio->dev;
+ input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+ input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+ input_set_abs_params(pdynapro->dev, ABS_X,
+ DYNAPRO_MIN_XC, DYNAPRO_MAX_XC, 0, 0);
+ input_set_abs_params(pdynapro->dev, ABS_Y,
+ DYNAPRO_MIN_YC, DYNAPRO_MAX_YC, 0, 0);
+
+ serio_set_drvdata(serio, pdynapro);
+
+ err = serio_open(serio, drv);
+ if (err)
+ goto fail2;
+
+ err = input_register_device(pdynapro->dev);
+ if (err)
+ goto fail3;
+
+ return 0;
+
+ fail3: serio_close(serio);
+ fail2: serio_set_drvdata(serio, NULL);
+ fail1: input_free_device(input_dev);
+ kfree(pdynapro);
+ return err;
+}
+
+/*
+ * The serio driver structure.
+ */
+
+static struct serio_device_id dynapro_serio_ids[] = {
+ {
+ .type = SERIO_RS232,
+ .proto = SERIO_DYNAPRO,
+ .id = SERIO_ANY,
+ .extra = SERIO_ANY,
+ },
+ { 0 }
+};
+
+MODULE_DEVICE_TABLE(serio, dynapro_serio_ids);
+
+static struct serio_driver dynapro_drv = {
+ .driver = {
+ .name = "dynapro",
+ },
+ .description = DRIVER_DESC,
+ .id_table = dynapro_serio_ids,
+ .interrupt = dynapro_interrupt,
+ .connect = dynapro_connect,
+ .disconnect = dynapro_disconnect,
+};
+
+/*
+ * The functions for inserting/removing us as a module.
+ */
+
+static int __init dynapro_init(void)
+{
+ return serio_register_driver(&dynapro_drv);
+}
+
+static void __exit dynapro_exit(void)
+{
+ serio_unregister_driver(&dynapro_drv);
+}
+
+module_init(dynapro_init);
+module_exit(dynapro_exit);
diff --git a/drivers/input/touchscreen/mainstone-wm97xx.c b/drivers/input/touchscreen/mainstone-wm97xx.c
index 8fc3b08..6cdcf2a 100644
--- a/drivers/input/touchscreen/mainstone-wm97xx.c
+++ b/drivers/input/touchscreen/mainstone-wm97xx.c
@@ -14,7 +14,7 @@
*
* Notes:
* This is a wm97xx extended touch driver to capture touch
- * data in a continuous manner on the Intel XScale archictecture
+ * data in a continuous manner on the Intel XScale architecture
*
* Features:
* - codecs supported:- WM9705, WM9712, WM9713
@@ -131,7 +131,7 @@
/* When the AC97 queue has been drained we need to allow time
* to buffer up samples otherwise we end up spinning polling
* for samples. The controller can't have a suitably low
- * threashold set to use the notifications it gives.
+ * threshold set to use the notifications it gives.
*/
schedule_timeout_uninterruptible(1);
diff --git a/drivers/input/touchscreen/s3c2410_ts.c b/drivers/input/touchscreen/s3c2410_ts.c
new file mode 100644
index 0000000..6386b44
--- /dev/null
+++ b/drivers/input/touchscreen/s3c2410_ts.c
@@ -0,0 +1,457 @@
+/*
+ * Samsung S3C24XX touchscreen driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the term of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Copyright 2004 Arnaud Patard <arnaud.patard@rtp-net.org>
+ * Copyright 2008 Ben Dooks <ben-linux@fluff.org>
+ * Copyright 2009 Simtec Electronics <linux@simtec.co.uk>
+ *
+ * Additional work by Herbert Pötzl <herbert@13thfloor.at> and
+ * Harald Welte <laforge@openmoko.org>
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/gpio.h>
+#include <linux/input.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <plat/adc.h>
+#include <plat/regs-adc.h>
+
+#include <mach/regs-gpio.h>
+#include <mach/ts.h>
+
+#define TSC_SLEEP (S3C2410_ADCTSC_PULL_UP_DISABLE | S3C2410_ADCTSC_XY_PST(0))
+
+#define INT_DOWN (0)
+#define INT_UP (1 << 8)
+
+#define WAIT4INT (S3C2410_ADCTSC_YM_SEN | \
+ S3C2410_ADCTSC_YP_SEN | \
+ S3C2410_ADCTSC_XP_SEN | \
+ S3C2410_ADCTSC_XY_PST(3))
+
+#define AUTOPST (S3C2410_ADCTSC_YM_SEN | \
+ S3C2410_ADCTSC_YP_SEN | \
+ S3C2410_ADCTSC_XP_SEN | \
+ S3C2410_ADCTSC_AUTO_PST | \
+ S3C2410_ADCTSC_XY_PST(0))
+
+/* Per-touchscreen data. */
+
+/**
+ * struct s3c2410ts - driver touchscreen state.
+ * @client: The ADC client we registered with the core driver.
+ * @dev: The device we are bound to.
+ * @input: The input device we registered with the input subsystem.
+ * @clock: The clock for the adc.
+ * @io: Pointer to the IO base.
+ * @xp: The accumulated X position data.
+ * @yp: The accumulated Y position data.
+ * @irq_tc: The interrupt number for pen up/down interrupt
+ * @count: The number of samples collected.
+ * @shift: The log2 of the maximum count to read in one go.
+ */
+struct s3c2410ts {
+ struct s3c_adc_client *client;
+ struct device *dev;
+ struct input_dev *input;
+ struct clk *clock;
+ void __iomem *io;
+ unsigned long xp;
+ unsigned long yp;
+ int irq_tc;
+ int count;
+ int shift;
+};
+
+static struct s3c2410ts ts;
+
+/**
+ * s3c2410_ts_connect - configure gpio for s3c2410 systems
+ *
+ * Configure the GPIO for the S3C2410 system, where we have external FETs
+ * connected to the device (later systems such as the S3C2440 integrate
+ * these into the device).
+*/
+static inline void s3c2410_ts_connect(void)
+{
+ s3c2410_gpio_cfgpin(S3C2410_GPG(12), S3C2410_GPG12_XMON);
+ s3c2410_gpio_cfgpin(S3C2410_GPG(13), S3C2410_GPG13_nXPON);
+ s3c2410_gpio_cfgpin(S3C2410_GPG(14), S3C2410_GPG14_YMON);
+ s3c2410_gpio_cfgpin(S3C2410_GPG(15), S3C2410_GPG15_nYPON);
+}
+
+/**
+ * get_down - return the down state of the pen
+ * @data0: The data read from ADCDAT0 register.
+ * @data1: The data read from ADCDAT1 register.
+ *
+ * Return non-zero if both readings show that the pen is down.
+ */
+static inline bool get_down(unsigned long data0, unsigned long data1)
+{
+ /* returns true if both data values show stylus down */
+ return (!(data0 & S3C2410_ADCDAT0_UPDOWN) &&
+ !(data1 & S3C2410_ADCDAT0_UPDOWN));
+}
+
+static void touch_timer_fire(unsigned long data)
+{
+ unsigned long data0;
+ unsigned long data1;
+ bool down;
+
+ data0 = readl(ts.io + S3C2410_ADCDAT0);
+ data1 = readl(ts.io + S3C2410_ADCDAT1);
+
+ down = get_down(data0, data1);
+
+ if (ts.count == (1 << ts.shift)) {
+ ts.xp >>= ts.shift;
+ ts.yp >>= ts.shift;
+
+ dev_dbg(ts.dev, "%s: X=%lu, Y=%lu, count=%d\n",
+ __func__, ts.xp, ts.yp, ts.count);
+
+ input_report_abs(ts.input, ABS_X, ts.xp);
+ input_report_abs(ts.input, ABS_Y, ts.yp);
+
+ input_report_key(ts.input, BTN_TOUCH, 1);
+ input_sync(ts.input);
+
+ ts.xp = 0;
+ ts.yp = 0;
+ ts.count = 0;
+ }
+
+ if (down) {
+ s3c_adc_start(ts.client, 0, 1 << ts.shift);
+ } else {
+ ts.count = 0;
+
+ input_report_key(ts.input, BTN_TOUCH, 0);
+ input_sync(ts.input);
+
+ writel(WAIT4INT | INT_DOWN, ts.io + S3C2410_ADCTSC);
+ }
+}
+
+static DEFINE_TIMER(touch_timer, touch_timer_fire, 0, 0);
+
+/**
+ * stylus_irq - touchscreen stylus event interrupt
+ * @irq: The interrupt number
+ * @dev_id: The device ID.
+ *
+ * Called when the IRQ_TC is fired for a pen up or down event.
+ */
+static irqreturn_t stylus_irq(int irq, void *dev_id)
+{
+ unsigned long data0;
+ unsigned long data1;
+ bool down;
+
+ data0 = readl(ts.io + S3C2410_ADCDAT0);
+ data1 = readl(ts.io + S3C2410_ADCDAT1);
+
+ down = get_down(data0, data1);
+
+ /* TODO we should never get an interrupt with down set while
+ * the timer is running, but maybe we ought to verify that the
+ * timer isn't running anyways. */
+
+ if (down)
+ s3c_adc_start(ts.client, 0, 1 << ts.shift);
+ else
+ dev_info(ts.dev, "%s: count=%d\n", __func__, ts.count);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * s3c24xx_ts_conversion - ADC conversion callback
+ * @client: The client that was registered with the ADC core.
+ * @data0: The reading from ADCDAT0.
+ * @data1: The reading from ADCDAT1.
+ * @left: The number of samples left.
+ *
+ * Called when a conversion has finished.
+ */
+static void s3c24xx_ts_conversion(struct s3c_adc_client *client,
+ unsigned data0, unsigned data1,
+ unsigned *left)
+{
+ dev_dbg(ts.dev, "%s: %d,%d\n", __func__, data0, data1);
+
+ ts.xp += data0;
+ ts.yp += data1;
+
+ ts.count++;
+
+ /* From tests, it seems that it is unlikely to get a pen-up
+ * event during the conversion process which means we can
+ * ignore any pen-up events with less than the requisite
+ * count done.
+ *
+ * In several thousand conversions, no pen-ups where detected
+ * before count completed.
+ */
+}
+
+/**
+ * s3c24xx_ts_select - ADC selection callback.
+ * @client: The client that was registered with the ADC core.
+ * @select: The reason for select.
+ *
+ * Called when the ADC core selects (or deslects) us as a client.
+ */
+static void s3c24xx_ts_select(struct s3c_adc_client *client, unsigned select)
+{
+ if (select) {
+ writel(S3C2410_ADCTSC_PULL_UP_DISABLE | AUTOPST,
+ ts.io + S3C2410_ADCTSC);
+ } else {
+ mod_timer(&touch_timer, jiffies+1);
+ writel(WAIT4INT | INT_UP, ts.io + S3C2410_ADCTSC);
+ }
+}
+
+/**
+ * s3c2410ts_probe - device core probe entry point
+ * @pdev: The device we are being bound to.
+ *
+ * Initialise, find and allocate any resources we need to run and then
+ * register with the ADC and input systems.
+ */
+static int __devinit s3c2410ts_probe(struct platform_device *pdev)
+{
+ struct s3c2410_ts_mach_info *info;
+ struct device *dev = &pdev->dev;
+ struct input_dev *input_dev;
+ struct resource *res;
+ int ret = -EINVAL;
+
+ /* Initialise input stuff */
+ memset(&ts, 0, sizeof(struct s3c2410ts));
+
+ ts.dev = dev;
+
+ info = pdev->dev.platform_data;
+ if (!info) {
+ dev_err(dev, "no platform data, cannot attach\n");
+ return -EINVAL;
+ }
+
+ dev_dbg(dev, "initialising touchscreen\n");
+
+ ts.clock = clk_get(dev, "adc");
+ if (IS_ERR(ts.clock)) {
+ dev_err(dev, "cannot get adc clock source\n");
+ return -ENOENT;
+ }
+
+ clk_enable(ts.clock);
+ dev_dbg(dev, "got and enabled clocks\n");
+
+ ts.irq_tc = ret = platform_get_irq(pdev, 0);
+ if (ret < 0) {
+ dev_err(dev, "no resource for interrupt\n");
+ goto err_clk;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(dev, "no resource for registers\n");
+ ret = -ENOENT;
+ goto err_clk;
+ }
+
+ ts.io = ioremap(res->start, resource_size(res));
+ if (ts.io == NULL) {
+ dev_err(dev, "cannot map registers\n");
+ ret = -ENOMEM;
+ goto err_clk;
+ }
+
+ /* Configure the touchscreen external FETs on the S3C2410 */
+ if (!platform_get_device_id(pdev)->driver_data)
+ s3c2410_ts_connect();
+
+ ts.client = s3c_adc_register(pdev, s3c24xx_ts_select,
+ s3c24xx_ts_conversion, 1);
+ if (IS_ERR(ts.client)) {
+ dev_err(dev, "failed to register adc client\n");
+ ret = PTR_ERR(ts.client);
+ goto err_iomap;
+ }
+
+ /* Initialise registers */
+ if ((info->delay & 0xffff) > 0)
+ writel(info->delay & 0xffff, ts.io + S3C2410_ADCDLY);
+
+ writel(WAIT4INT | INT_DOWN, ts.io + S3C2410_ADCTSC);
+
+ input_dev = input_allocate_device();
+ if (!input_dev) {
+ dev_err(dev, "Unable to allocate the input device !!\n");
+ ret = -ENOMEM;
+ goto err_iomap;
+ }
+
+ ts.input = input_dev;
+ ts.input->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+ ts.input->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+ input_set_abs_params(ts.input, ABS_X, 0, 0x3FF, 0, 0);
+ input_set_abs_params(ts.input, ABS_Y, 0, 0x3FF, 0, 0);
+
+ ts.input->name = "S3C24XX TouchScreen";
+ ts.input->id.bustype = BUS_HOST;
+ ts.input->id.vendor = 0xDEAD;
+ ts.input->id.product = 0xBEEF;
+ ts.input->id.version = 0x0102;
+
+ ts.shift = info->oversampling_shift;
+
+ ret = request_irq(ts.irq_tc, stylus_irq, IRQF_DISABLED,
+ "s3c2410_ts_pen", ts.input);
+ if (ret) {
+ dev_err(dev, "cannot get TC interrupt\n");
+ goto err_inputdev;
+ }
+
+ dev_info(dev, "driver attached, registering input device\n");
+
+ /* All went ok, so register to the input system */
+ ret = input_register_device(ts.input);
+ if (ret < 0) {
+ dev_err(dev, "failed to register input device\n");
+ ret = -EIO;
+ goto err_tcirq;
+ }
+
+ return 0;
+
+ err_tcirq:
+ free_irq(ts.irq_tc, ts.input);
+ err_inputdev:
+ input_unregister_device(ts.input);
+ err_iomap:
+ iounmap(ts.io);
+ err_clk:
+ del_timer_sync(&touch_timer);
+ clk_put(ts.clock);
+ return ret;
+}
+
+/**
+ * s3c2410ts_remove - device core removal entry point
+ * @pdev: The device we are being removed from.
+ *
+ * Free up our state ready to be removed.
+ */
+static int __devexit s3c2410ts_remove(struct platform_device *pdev)
+{
+ free_irq(ts.irq_tc, ts.input);
+ del_timer_sync(&touch_timer);
+
+ clk_disable(ts.clock);
+ clk_put(ts.clock);
+
+ input_unregister_device(ts.input);
+ iounmap(ts.io);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int s3c2410ts_suspend(struct device *dev)
+{
+ writel(TSC_SLEEP, ts.io + S3C2410_ADCTSC);
+ disable_irq(ts.irq_tc);
+ clk_disable(ts.clock);
+
+ return 0;
+}
+
+static int s3c2410ts_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct s3c2410_ts_mach_info *info = pdev->dev.platform_data;
+
+ clk_enable(ts.clock);
+
+ /* Initialise registers */
+ if ((info->delay & 0xffff) > 0)
+ writel(info->delay & 0xffff, ts.io + S3C2410_ADCDLY);
+
+ writel(WAIT4INT | INT_DOWN, ts.io + S3C2410_ADCTSC);
+
+ return 0;
+}
+
+static struct dev_pm_ops s3c_ts_pmops = {
+ .suspend = s3c2410ts_suspend,
+ .resume = s3c2410ts_resume,
+};
+#endif
+
+static struct platform_device_id s3cts_driver_ids[] = {
+ { "s3c2410-ts", 0 },
+ { "s3c2440-ts", 1 },
+ { }
+};
+MODULE_DEVICE_TABLE(platform, s3cts_driver_ids);
+
+static struct platform_driver s3c_ts_driver = {
+ .driver = {
+ .name = "s3c24xx-ts",
+ .owner = THIS_MODULE,
+#ifdef CONFIG_PM
+ .pm = &s3c_ts_pmops,
+#endif
+ },
+ .id_table = s3cts_driver_ids,
+ .probe = s3c2410ts_probe,
+ .remove = __devexit_p(s3c2410ts_remove),
+};
+
+static int __init s3c2410ts_init(void)
+{
+ return platform_driver_register(&s3c_ts_driver);
+}
+
+static void __exit s3c2410ts_exit(void)
+{
+ platform_driver_unregister(&s3c_ts_driver);
+}
+
+module_init(s3c2410ts_init);
+module_exit(s3c2410ts_exit);
+
+MODULE_AUTHOR("Arnaud Patard <arnaud.patard@rtp-net.org>, "
+ "Ben Dooks <ben@simtec.co.uk>, "
+ "Simtec Electronics <linux@simtec.co.uk>");
+MODULE_DESCRIPTION("S3C24XX Touchscreen driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/input/touchscreen/ucb1400_ts.c b/drivers/input/touchscreen/ucb1400_ts.c
index 095f84b..89dcbe7 100644
--- a/drivers/input/touchscreen/ucb1400_ts.c
+++ b/drivers/input/touchscreen/ucb1400_ts.c
@@ -355,10 +355,13 @@
goto err;
}
- error = ucb1400_ts_detect_irq(ucb);
- if (error) {
- printk(KERN_ERR "UCB1400: IRQ probe failed\n");
- goto err_free_devs;
+ /* Only in case the IRQ line wasn't supplied, try detecting it */
+ if (ucb->irq < 0) {
+ error = ucb1400_ts_detect_irq(ucb);
+ if (error) {
+ printk(KERN_ERR "UCB1400: IRQ probe failed\n");
+ goto err_free_devs;
+ }
}
init_waitqueue_head(&ucb->ts_wait);
diff --git a/drivers/input/touchscreen/usbtouchscreen.c b/drivers/input/touchscreen/usbtouchscreen.c
index 68ece58..09a5e73 100644
--- a/drivers/input/touchscreen/usbtouchscreen.c
+++ b/drivers/input/touchscreen/usbtouchscreen.c
@@ -14,6 +14,7 @@
* - General Touch
* - GoTop Super_Q2/GogoPen/PenPower tablets
* - JASTEC USB touch controller/DigiTech DTR-02U
+ * - Zytronic capacitive touchscreen
*
* Copyright (C) 2004-2007 by Daniel Ritz <daniel.ritz@gmx.ch>
* Copyright (C) by Todd E. Johnson (mtouchusb.c)
@@ -73,6 +74,15 @@
int min_press, max_press;
int rept_size;
+ /*
+ * Always service the USB devices irq not just when the input device is
+ * open. This is useful when devices have a watchdog which prevents us
+ * from periodically polling the device. Leave this unset unless your
+ * touchscreen device requires it, as it does consume more of the USB
+ * bandwidth.
+ */
+ bool irq_always;
+
void (*process_pkt) (struct usbtouch_usb *usbtouch, unsigned char *pkt, int len);
/*
@@ -121,6 +131,8 @@
DEVTYPE_GOTOP,
DEVTYPE_JASTEC,
DEVTYPE_E2I,
+ DEVTYPE_ZYTRONIC,
+ DEVTYPE_TC5UH,
};
#define USB_DEVICE_HID_CLASS(vend, prod) \
@@ -201,6 +213,15 @@
#ifdef CONFIG_TOUCHSCREEN_USB_E2I
{USB_DEVICE(0x1ac7, 0x0001), .driver_info = DEVTYPE_E2I},
#endif
+
+#ifdef CONFIG_TOUCHSCREEN_USB_ZYTRONIC
+ {USB_DEVICE(0x14c8, 0x0003), .driver_info = DEVTYPE_ZYTRONIC},
+#endif
+
+#ifdef CONFIG_TOUCHSCREEN_USB_ETT_TC5UH
+ {USB_DEVICE(0x0664, 0x0309), .driver_info = DEVTYPE_TC5UH},
+#endif
+
{}
};
@@ -538,6 +559,19 @@
}
#endif
+/*****************************************************************************
+ * ET&T TC5UH part
+ */
+#ifdef CONFIG_TOUCHSCREEN_USB_ETT_TC5UH
+static int tc5uh_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
+{
+ dev->x = ((pkt[2] & 0x0F) << 8) | pkt[1];
+ dev->y = ((pkt[4] & 0x0F) << 8) | pkt[3];
+ dev->touch = pkt[0] & 0x01;
+
+ return 1;
+}
+#endif
/*****************************************************************************
* IdealTEK URTC1000 Part
@@ -621,6 +655,39 @@
}
#endif
+/*****************************************************************************
+ * Zytronic Part
+ */
+#ifdef CONFIG_TOUCHSCREEN_USB_ZYTRONIC
+static int zytronic_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
+{
+ switch (pkt[0]) {
+ case 0x3A: /* command response */
+ dbg("%s: Command response %d", __func__, pkt[1]);
+ break;
+
+ case 0xC0: /* down */
+ dev->x = (pkt[1] & 0x7f) | ((pkt[2] & 0x07) << 7);
+ dev->y = (pkt[3] & 0x7f) | ((pkt[4] & 0x07) << 7);
+ dev->touch = 1;
+ dbg("%s: down %d,%d", __func__, dev->x, dev->y);
+ return 1;
+
+ case 0x80: /* up */
+ dev->x = (pkt[1] & 0x7f) | ((pkt[2] & 0x07) << 7);
+ dev->y = (pkt[3] & 0x7f) | ((pkt[4] & 0x07) << 7);
+ dev->touch = 0;
+ dbg("%s: up %d,%d", __func__, dev->x, dev->y);
+ return 1;
+
+ default:
+ dbg("%s: Unknown return %d", __func__, pkt[0]);
+ break;
+ }
+
+ return 0;
+}
+#endif
/*****************************************************************************
* the different device descriptors
@@ -783,6 +850,29 @@
.read_data = e2i_read_data,
},
#endif
+
+#ifdef CONFIG_TOUCHSCREEN_USB_ZYTRONIC
+ [DEVTYPE_ZYTRONIC] = {
+ .min_xc = 0x0,
+ .max_xc = 0x03ff,
+ .min_yc = 0x0,
+ .max_yc = 0x03ff,
+ .rept_size = 5,
+ .read_data = zytronic_read_data,
+ .irq_always = true,
+ },
+#endif
+
+#ifdef CONFIG_TOUCHSCREEN_USB_ETT_TC5UH
+ [DEVTYPE_TC5UH] = {
+ .min_xc = 0x0,
+ .max_xc = 0x0fff,
+ .min_yc = 0x0,
+ .max_yc = 0x0fff,
+ .rept_size = 5,
+ .read_data = tc5uh_read_data,
+ },
+#endif
};
@@ -933,8 +1023,10 @@
usbtouch->irq->dev = usbtouch->udev;
- if (usb_submit_urb(usbtouch->irq, GFP_KERNEL))
- return -EIO;
+ if (!usbtouch->type->irq_always) {
+ if (usb_submit_urb(usbtouch->irq, GFP_KERNEL))
+ return -EIO;
+ }
return 0;
}
@@ -943,7 +1035,8 @@
{
struct usbtouch_usb *usbtouch = input_get_drvdata(input);
- usb_kill_urb(usbtouch->irq);
+ if (!usbtouch->type->irq_always)
+ usb_kill_urb(usbtouch->irq);
}
@@ -1066,6 +1159,9 @@
usb_set_intfdata(intf, usbtouch);
+ if (usbtouch->type->irq_always)
+ usb_submit_urb(usbtouch->irq, GFP_KERNEL);
+
return 0;
out_free_buffers:
@@ -1087,7 +1183,7 @@
dbg("%s - usbtouch is initialized, cleaning up", __func__);
usb_set_intfdata(intf, NULL);
- usb_kill_urb(usbtouch->irq);
+ /* this will stop IO via close */
input_unregister_device(usbtouch->input);
usb_free_urb(usbtouch->irq);
usbtouch_free_buffers(interface_to_usbdev(intf), usbtouch);
diff --git a/drivers/input/touchscreen/zylonite-wm97xx.c b/drivers/input/touchscreen/zylonite-wm97xx.c
index 41e4359..eca54db 100644
--- a/drivers/input/touchscreen/zylonite-wm97xx.c
+++ b/drivers/input/touchscreen/zylonite-wm97xx.c
@@ -96,7 +96,7 @@
/* When the AC97 queue has been drained we need to allow time
* to buffer up samples otherwise we end up spinning polling
* for samples. The controller can't have a suitably low
- * threashold set to use the notifications it gives.
+ * threshold set to use the notifications it gives.
*/
msleep(1);
diff --git a/drivers/isdn/act2000/Kconfig b/drivers/isdn/act2000/Kconfig
index 3fc1a54..fa2673f 100644
--- a/drivers/isdn/act2000/Kconfig
+++ b/drivers/isdn/act2000/Kconfig
@@ -1,6 +1,3 @@
-#
-# Config.in for IBM Active 2000 ISDN driver
-#
config ISDN_DRV_ACT2000
tristate "IBM Active 2000 support"
depends on ISA
@@ -10,4 +7,3 @@
into the card using a utility which is part of the latest
isdn4k-utils package. Please read the file
<file:Documentation/isdn/README.act2000> for more information.
-
diff --git a/drivers/isdn/capi/Kconfig b/drivers/isdn/capi/Kconfig
index e1afd60..b2a0475 100644
--- a/drivers/isdn/capi/Kconfig
+++ b/drivers/isdn/capi/Kconfig
@@ -1,6 +1,3 @@
-#
-# Config.in for the CAPI subsystem
-#
config ISDN_DRV_AVMB1_VERBOSE_REASON
bool "Verbose reason code reporting"
default y
@@ -59,4 +56,3 @@
the legacy isdn4linux link layer. If you have a card which is
supported by a CAPI driver, but still want to use old features like
ippp interfaces or ttyI emulation, say Y/M here.
-
diff --git a/drivers/isdn/capi/capidrv.c b/drivers/isdn/capi/capidrv.c
index 3e6d17f..66b7d7a 100644
--- a/drivers/isdn/capi/capidrv.c
+++ b/drivers/isdn/capi/capidrv.c
@@ -830,7 +830,7 @@
case 0: break;
case 1: s = "unknown class"; break;
case 2: s = "unknown function"; break;
- default: s = "unkown error"; break;
+ default: s = "unknown error"; break;
}
if (s)
printk(KERN_INFO "capidrv-%d: %s from controller 0x%x function %d: %s\n",
diff --git a/drivers/isdn/hardware/eicon/di.c b/drivers/isdn/hardware/eicon/di.c
index b029d13..cb14ae3 100644
--- a/drivers/isdn/hardware/eicon/di.c
+++ b/drivers/isdn/hardware/eicon/di.c
@@ -806,7 +806,7 @@
DELIVERY - indication entered isdn_rc function
RNR=... - application had returned RNR=... after the
look ahead callback
- RNum=0 - aplication had not returned any buffer to copy
+ RNum=0 - application had not returned any buffer to copy
this indication and will copy it self
COMPLETE - XDI had copied the data to the buffers provided
bu the application and is about to issue the
diff --git a/drivers/isdn/hardware/eicon/maintidi.c b/drivers/isdn/hardware/eicon/maintidi.c
index 41c26e7..534978b 100644
--- a/drivers/isdn/hardware/eicon/maintidi.c
+++ b/drivers/isdn/hardware/eicon/maintidi.c
@@ -385,7 +385,7 @@
}
break;
default:
- diva_mnt_internal_dprintf (0, DLI_ERR, "Unknon IDI Ind (DMA mode): %02x", Ind);
+ diva_mnt_internal_dprintf (0, DLI_ERR, "Unknown IDI Ind (DMA mode): %02x", Ind);
}
p += (this_ind_length+1);
total_length -= (4 + this_ind_length);
@@ -420,7 +420,7 @@
}
break;
default:
- diva_mnt_internal_dprintf (0, DLI_ERR, "Unknon IDI Ind: %02x", Ind);
+ diva_mnt_internal_dprintf (0, DLI_ERR, "Unknown IDI Ind: %02x", Ind);
}
}
}
diff --git a/drivers/isdn/hardware/mISDN/hfcsusb.c b/drivers/isdn/hardware/mISDN/hfcsusb.c
index fc46a26..a64bb6c 100644
--- a/drivers/isdn/hardware/mISDN/hfcsusb.c
+++ b/drivers/isdn/hardware/mISDN/hfcsusb.c
@@ -721,7 +721,7 @@
switch (protocol) {
case (-1): /* used for init */
bch->state = -1;
- /* fall trough */
+ /* fall through */
case (ISDN_P_NONE):
if (bch->state == ISDN_P_NONE)
return 0; /* already in idle state */
diff --git a/drivers/isdn/hardware/mISDN/hfcsusb.h b/drivers/isdn/hardware/mISDN/hfcsusb.h
index 43efe73..369196a 100644
--- a/drivers/isdn/hardware/mISDN/hfcsusb.h
+++ b/drivers/isdn/hardware/mISDN/hfcsusb.h
@@ -150,7 +150,7 @@
for (i = 0; list[i].name != NULL; i++)
if (list[i].num == num)
return list[i].name;
- return "<unkown USB Error>";
+ return "<unknown USB Error>";
}
/* USB descriptor need to contain one of the following EndPoint combination: */
diff --git a/drivers/isdn/hardware/mISDN/mISDNisar.c b/drivers/isdn/hardware/mISDN/mISDNisar.c
index de352a1..09095c7 100644
--- a/drivers/isdn/hardware/mISDN/mISDNisar.c
+++ b/drivers/isdn/hardware/mISDN/mISDNisar.c
@@ -860,7 +860,7 @@
pr_debug("%s: pump stev GSTN CLEAR\n", ch->is->name);
break;
default:
- pr_info("u%s: nknown pump stev %x\n", ch->is->name, devt);
+ pr_info("u%s: unknown pump stev %x\n", ch->is->name, devt);
break;
}
}
diff --git a/drivers/isdn/hisax/hfc_usb.c b/drivers/isdn/hisax/hfc_usb.c
index a420b64..aaaeaaf 100644
--- a/drivers/isdn/hisax/hfc_usb.c
+++ b/drivers/isdn/hisax/hfc_usb.c
@@ -1086,7 +1086,7 @@
break;
default:
DBG(HFCUSB_DBG_STATES,
- "HFC_USB: hfc_usb_d_l2l1: unkown state : %#x", pr);
+ "HFC_USB: hfc_usb_d_l2l1: unknown state : %#x", pr);
break;
}
}
diff --git a/drivers/isdn/hysdn/Kconfig b/drivers/isdn/hysdn/Kconfig
index c9e4231..e86bc65 100644
--- a/drivers/isdn/hysdn/Kconfig
+++ b/drivers/isdn/hysdn/Kconfig
@@ -1,6 +1,3 @@
-#
-# Config.in for HYSDN ISDN driver
-#
config HYSDN
tristate "Hypercope HYSDN cards (Champ, Ergo, Metro) support (module only)"
depends on m && PROC_FS && PCI
@@ -15,4 +12,3 @@
depends on HYSDN && ISDN_CAPI
help
Say Y here if you like to use Hypercope's CAPI 2.0 interface.
-
diff --git a/drivers/isdn/i4l/isdn_net.c b/drivers/isdn/i4l/isdn_net.c
index 90b56ed..507e13d 100644
--- a/drivers/isdn/i4l/isdn_net.c
+++ b/drivers/isdn/i4l/isdn_net.c
@@ -1563,7 +1563,7 @@
*(__be32 *)(p + 4) = cpu_to_be32(CISCO_SLARP_KEEPALIVE);
*(__be32 *)(p + 8) = cpu_to_be32(lp->cisco_myseq);
*(__be32 *)(p + 12) = cpu_to_be32(lp->cisco_yourseq);
- *(__be16 *)(p + 16) = cpu_to_be16(0xffff); // reliablity, always 0xffff
+ *(__be16 *)(p + 16) = cpu_to_be16(0xffff); // reliability, always 0xffff
p += 18;
isdn_net_write_super(lp, skb);
diff --git a/drivers/isdn/i4l/isdn_ppp.c b/drivers/isdn/i4l/isdn_ppp.c
index 642d5aa..45df667 100644
--- a/drivers/isdn/i4l/isdn_ppp.c
+++ b/drivers/isdn/i4l/isdn_ppp.c
@@ -836,7 +836,7 @@
unsigned short hl;
struct sk_buff *skb;
/*
- * we need to reserve enought space in front of
+ * we need to reserve enough space in front of
* sk_buff. old call to dev_alloc_skb only reserved
* 16 bytes, now we are looking what the driver want
*/
@@ -1326,7 +1326,7 @@
struct sk_buff *new_skb;
unsigned short hl;
/*
- * we need to reserve enought space in front of
+ * we need to reserve enough space in front of
* sk_buff. old call to dev_alloc_skb only reserved
* 16 bytes, now we are looking what the driver want.
*/
@@ -1674,7 +1674,7 @@
* - insert new fragment into the proper sequence slot (once that's done
* newfrag will be set to NULL)
* - reassemble any complete fragment sequence (non-null 'start'
- * indicates there is a continguous sequence present)
+ * indicates there is a contiguous sequence present)
* - discard any incomplete sequences that are below minseq -- due
* to the fact that sender always increment sequence number, if there
* is an incomplete sequence below minseq, no new fragments would
diff --git a/drivers/isdn/i4l/isdn_ttyfax.c b/drivers/isdn/i4l/isdn_ttyfax.c
index 78f7660..4c41f19 100644
--- a/drivers/isdn/i4l/isdn_ttyfax.c
+++ b/drivers/isdn/i4l/isdn_ttyfax.c
@@ -470,7 +470,7 @@
}
return 0;
}
- /* BADMUL=value - dummy 0=disable errorchk disabled (treshold multiplier) */
+ /* BADMUL=value - dummy 0=disable errorchk disabled (threshold multiplier) */
if (!strncmp(p[0], "BADMUL", 6)) {
p[0] += 6;
switch (*p[0]) {
diff --git a/drivers/isdn/icn/Kconfig b/drivers/isdn/icn/Kconfig
index 89d15ee..4534f21 100644
--- a/drivers/isdn/icn/Kconfig
+++ b/drivers/isdn/icn/Kconfig
@@ -1,6 +1,3 @@
-#
-# Config.in for ICN ISDN driver
-#
config ISDN_DRV_ICN
tristate "ICN 2B and 4B support"
depends on ISA
@@ -13,4 +10,3 @@
separately. See <file:Documentation/isdn/README> and
<file:Documentation/isdn/README.icn> for more
information.
-
diff --git a/drivers/isdn/mISDN/dsp_core.c b/drivers/isdn/mISDN/dsp_core.c
index 77ee286..43ff4d3 100644
--- a/drivers/isdn/mISDN/dsp_core.c
+++ b/drivers/isdn/mISDN/dsp_core.c
@@ -110,7 +110,7 @@
* crossconnections and conferences via software if not possible through
* hardware. If hardware capability is available, hardware is used.
*
- * Echo: Is generated by CMX and is used to check performane of hard and
+ * Echo: Is generated by CMX and is used to check performance of hard and
* software CMX.
*
* The CMX has special functions for conferences with one, two and more
diff --git a/drivers/isdn/mISDN/tei.c b/drivers/isdn/mISDN/tei.c
index e04bad6..6d4da60 100644
--- a/drivers/isdn/mISDN/tei.c
+++ b/drivers/isdn/mISDN/tei.c
@@ -725,7 +725,7 @@
if (tm->rcnt == 1) {
if (*debug & DEBUG_L2_TEI)
tm->tei_m.printdebug(fi,
- "check req for tei %d sucessful\n", tm->l2->tei);
+ "check req for tei %d successful\n", tm->l2->tei);
mISDN_FsmChangeState(fi, ST_TEI_NOP);
} else if (tm->rcnt > 1) {
/* duplicate assignment; remove */
diff --git a/drivers/isdn/pcbit/Kconfig b/drivers/isdn/pcbit/Kconfig
index ffba6ec..e9b2dd8 100644
--- a/drivers/isdn/pcbit/Kconfig
+++ b/drivers/isdn/pcbit/Kconfig
@@ -1,6 +1,3 @@
-#
-# Config.in for PCBIT ISDN driver
-#
config ISDN_DRV_PCBIT
tristate "PCBIT-D support"
depends on ISA && (BROKEN || X86)
@@ -11,4 +8,3 @@
the card using a utility which is distributed separately. See
<file:Documentation/isdn/README> and
<file:Documentation/isdn/README.pcbit> for more information.
-
diff --git a/drivers/isdn/sc/Kconfig b/drivers/isdn/sc/Kconfig
index e6510ca..7469863 100644
--- a/drivers/isdn/sc/Kconfig
+++ b/drivers/isdn/sc/Kconfig
@@ -1,6 +1,3 @@
-#
-# Config.in for Spellcaster ISDN driver
-#
config ISDN_DRV_SC
tristate "Spellcaster support"
depends on ISA
@@ -9,4 +6,3 @@
driver currently builds only in a modularized version.
To build it, choose M here: the module will be called sc.
See <file:Documentation/isdn/README.sc> for more information.
-
diff --git a/drivers/macintosh/ans-lcd.c b/drivers/macintosh/ans-lcd.c
index 6a82218..a3d25da 100644
--- a/drivers/macintosh/ans-lcd.c
+++ b/drivers/macintosh/ans-lcd.c
@@ -3,7 +3,6 @@
*/
#include <linux/types.h>
-#include <linux/smp_lock.h>
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/miscdevice.h>
@@ -26,6 +25,7 @@
static unsigned long anslcd_short_delay = 80;
static unsigned long anslcd_long_delay = 3280;
static volatile unsigned char __iomem *anslcd_ptr;
+static DEFINE_MUTEX(anslcd_mutex);
#undef DEBUG
@@ -65,26 +65,31 @@
if (!access_ok(VERIFY_READ, buf, count))
return -EFAULT;
+
+ mutex_lock(&anslcd_mutex);
for ( i = *ppos; count > 0; ++i, ++p, --count )
{
char c;
__get_user(c, p);
anslcd_write_byte_data( c );
}
+ mutex_unlock(&anslcd_mutex);
*ppos = i;
return p - buf;
}
-static int
-anslcd_ioctl( struct inode * inode, struct file * file,
- unsigned int cmd, unsigned long arg )
+static long
+anslcd_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
char ch, __user *temp;
+ long ret = 0;
#ifdef DEBUG
printk(KERN_DEBUG "LCD: ioctl(%d,%d)\n",cmd,arg);
#endif
+ mutex_lock(&anslcd_mutex);
+
switch ( cmd )
{
case ANSLCD_CLEAR:
@@ -93,7 +98,7 @@
anslcd_write_byte_ctrl ( 0x06 );
anslcd_write_byte_ctrl ( 0x01 );
anslcd_write_byte_ctrl ( 0x02 );
- return 0;
+ break;
case ANSLCD_SENDCTRL:
temp = (char __user *) arg;
__get_user(ch, temp);
@@ -101,33 +106,37 @@
anslcd_write_byte_ctrl ( ch );
__get_user(ch, temp);
}
- return 0;
+ break;
case ANSLCD_SETSHORTDELAY:
if (!capable(CAP_SYS_ADMIN))
- return -EACCES;
- anslcd_short_delay=arg;
- return 0;
+ ret =-EACCES;
+ else
+ anslcd_short_delay=arg;
+ break;
case ANSLCD_SETLONGDELAY:
if (!capable(CAP_SYS_ADMIN))
- return -EACCES;
- anslcd_long_delay=arg;
- return 0;
+ ret = -EACCES;
+ else
+ anslcd_long_delay=arg;
+ break;
default:
- return -EINVAL;
+ ret = -EINVAL;
}
+
+ mutex_unlock(&anslcd_mutex);
+ return ret;
}
static int
anslcd_open( struct inode * inode, struct file * file )
{
- cycle_kernel_lock();
return 0;
}
const struct file_operations anslcd_fops = {
- .write = anslcd_write,
- .ioctl = anslcd_ioctl,
- .open = anslcd_open,
+ .write = anslcd_write,
+ .unlocked_ioctl = anslcd_ioctl,
+ .open = anslcd_open,
};
static struct miscdevice anslcd_dev = {
@@ -168,6 +177,7 @@
printk(KERN_DEBUG "LCD: init\n");
#endif
+ mutex_lock(&anslcd_mutex);
anslcd_write_byte_ctrl ( 0x38 );
anslcd_write_byte_ctrl ( 0x0c );
anslcd_write_byte_ctrl ( 0x06 );
@@ -176,6 +186,7 @@
for(a=0;a<80;a++) {
anslcd_write_byte_data(anslcd_logo[a]);
}
+ mutex_unlock(&anslcd_mutex);
return 0;
}
diff --git a/drivers/macintosh/therm_windtunnel.c b/drivers/macintosh/therm_windtunnel.c
index 8b93644..3fbe41b 100644
--- a/drivers/macintosh/therm_windtunnel.c
+++ b/drivers/macintosh/therm_windtunnel.c
@@ -15,7 +15,7 @@
*
* WARNING: This driver has only been testen on Apple's
* 1.25 MHz Dual G4 (March 03). It is tuned for a CPU
- * temperatur around 57 C.
+ * temperature around 57 C.
*
* Copyright (C) 2003, 2004 Samuel Rydh (samuel@ibrium.se)
*
diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c
index ed10381..e412980 100644
--- a/drivers/md/dm-crypt.c
+++ b/drivers/md/dm-crypt.c
@@ -988,7 +988,7 @@
goto bad_cipher;
}
- /* Compatiblity mode for old dm-crypt cipher strings */
+ /* Compatibility mode for old dm-crypt cipher strings */
if (!chainmode || (strcmp(chainmode, "plain") == 0 && !ivmode)) {
chainmode = "cbc";
ivmode = "plain";
diff --git a/drivers/md/dm-mpath.c b/drivers/md/dm-mpath.c
index 32d0b87..dce971d 100644
--- a/drivers/md/dm-mpath.c
+++ b/drivers/md/dm-mpath.c
@@ -1116,8 +1116,9 @@
return limit_reached;
}
-static void pg_init_done(struct dm_path *path, int errors)
+static void pg_init_done(void *data, int errors)
{
+ struct dm_path *path = data;
struct pgpath *pgpath = path_to_pgpath(path);
struct priority_group *pg = pgpath->pg;
struct multipath *m = pg->m;
@@ -1183,12 +1184,11 @@
static void activate_path(struct work_struct *work)
{
- int ret;
struct pgpath *pgpath =
container_of(work, struct pgpath, activate_path);
- ret = scsi_dh_activate(bdev_get_queue(pgpath->path.dev->bdev));
- pg_init_done(&pgpath->path, ret);
+ scsi_dh_activate(bdev_get_queue(pgpath->path.dev->bdev),
+ pg_init_done, &pgpath->path);
}
/*
diff --git a/drivers/media/common/Makefile b/drivers/media/common/Makefile
index 351b98b..169b337 100644
--- a/drivers/media/common/Makefile
+++ b/drivers/media/common/Makefile
@@ -1,6 +1,6 @@
saa7146-objs := saa7146_i2c.o saa7146_core.o
saa7146_vv-objs := saa7146_fops.o saa7146_video.o saa7146_hlp.o saa7146_vbi.o
-ir-common-objs := ir-functions.o ir-keymaps.o
+ir-common-objs := ir-functions.o ir-keymaps.o ir-keytable.o
obj-y += tuners/
obj-$(CONFIG_VIDEO_SAA7146) += saa7146.o
diff --git a/drivers/media/common/ir-functions.c b/drivers/media/common/ir-functions.c
index abd4791..e616f62 100644
--- a/drivers/media/common/ir-functions.c
+++ b/drivers/media/common/ir-functions.c
@@ -34,22 +34,19 @@
module_param(repeat, int, 0444);
MODULE_PARM_DESC(repeat,"auto-repeat for IR keys (default: on)");
-static int debug; /* debug level (0,1,2) */
-module_param(debug, int, 0644);
-
-#define dprintk(level, fmt, arg...) if (debug >= level) \
- printk(KERN_DEBUG fmt , ## arg)
+int media_ir_debug; /* media_ir_debug level (0,1,2) */
+module_param_named(debug, media_ir_debug, int, 0644);
/* -------------------------------------------------------------------------- */
static void ir_input_key_event(struct input_dev *dev, struct ir_input_state *ir)
{
if (KEY_RESERVED == ir->keycode) {
- printk(KERN_INFO "%s: unknown key: key=0x%02x raw=0x%02x down=%d\n",
- dev->name,ir->ir_key,ir->ir_raw,ir->keypressed);
+ printk(KERN_INFO "%s: unknown key: key=0x%02x down=%d\n",
+ dev->name, ir->ir_key, ir->keypressed);
return;
}
- dprintk(1,"%s: key event code=%d down=%d\n",
+ IR_dprintk(1,"%s: key event code=%d down=%d\n",
dev->name,ir->keycode,ir->keypressed);
input_report_key(dev,ir->keycode,ir->keypressed);
input_sync(dev);
@@ -57,39 +54,34 @@
/* -------------------------------------------------------------------------- */
-void ir_input_init(struct input_dev *dev, struct ir_input_state *ir,
+int ir_input_init(struct input_dev *dev, struct ir_input_state *ir,
int ir_type, struct ir_scancode_table *ir_codes)
{
- int i;
-
ir->ir_type = ir_type;
- memset(ir->ir_codes, 0, sizeof(ir->ir_codes));
+ ir->keytable.size = ir_roundup_tablesize(ir_codes->size);
+ ir->keytable.scan = kzalloc(ir->keytable.size *
+ sizeof(struct ir_scancode), GFP_KERNEL);
+ if (!ir->keytable.scan)
+ return -ENOMEM;
- /*
- * FIXME: This is a temporary workaround to use the new IR tables
- * with the old approach. Later patches will replace this to a
- * proper method
- */
+ IR_dprintk(1, "Allocated space for %d keycode entries (%zd bytes)\n",
+ ir->keytable.size,
+ ir->keytable.size * sizeof(ir->keytable.scan));
- if (ir_codes)
- for (i = 0; i < ir_codes->size; i++)
- if (ir_codes->scan[i].scancode < IR_KEYTAB_SIZE)
- ir->ir_codes[ir_codes->scan[i].scancode] = ir_codes->scan[i].keycode;
+ ir_copy_table(&ir->keytable, ir_codes);
+ ir_set_keycode_table(dev, &ir->keytable);
- dev->keycode = ir->ir_codes;
- dev->keycodesize = sizeof(IR_KEYTAB_TYPE);
- dev->keycodemax = IR_KEYTAB_SIZE;
- for (i = 0; i < IR_KEYTAB_SIZE; i++)
- set_bit(ir->ir_codes[i], dev->keybit);
clear_bit(0, dev->keybit);
-
set_bit(EV_KEY, dev->evbit);
if (repeat)
set_bit(EV_REP, dev->evbit);
+
+ return 0;
}
EXPORT_SYMBOL_GPL(ir_input_init);
+
void ir_input_nokey(struct input_dev *dev, struct ir_input_state *ir)
{
if (ir->keypressed) {
@@ -100,9 +92,9 @@
EXPORT_SYMBOL_GPL(ir_input_nokey);
void ir_input_keydown(struct input_dev *dev, struct ir_input_state *ir,
- u32 ir_key, u32 ir_raw)
+ u32 ir_key)
{
- u32 keycode = IR_KEYCODE(ir->ir_codes, ir_key);
+ u32 keycode = ir_g_keycode_from_table(dev, ir_key);
if (ir->keypressed && ir->keycode != keycode) {
ir->keypressed = 0;
@@ -110,7 +102,6 @@
}
if (!ir->keypressed) {
ir->ir_key = ir_key;
- ir->ir_raw = ir_raw;
ir->keycode = keycode;
ir->keypressed = 1;
ir_input_key_event(dev,ir);
@@ -275,7 +266,7 @@
* saa7134 */
/* decode raw bit pattern to RC5 code */
-static u32 ir_rc5_decode(unsigned int code)
+u32 ir_rc5_decode(unsigned int code)
{
unsigned int org_code = code;
unsigned int pair;
@@ -295,15 +286,16 @@
rc5 |= 1;
break;
case 3:
- dprintk(1, "ir-common: ir_rc5_decode(%x) bad code\n", org_code);
+ IR_dprintk(1, "ir-common: ir_rc5_decode(%x) bad code\n", org_code);
return 0;
}
}
- dprintk(1, "ir-common: code=%x, rc5=%x, start=%x, toggle=%x, address=%x, "
+ IR_dprintk(1, "ir-common: code=%x, rc5=%x, start=%x, toggle=%x, address=%x, "
"instr=%x\n", rc5, org_code, RC5_START(rc5),
RC5_TOGGLE(rc5), RC5_ADDR(rc5), RC5_INSTR(rc5));
return rc5;
}
+EXPORT_SYMBOL_GPL(ir_rc5_decode);
void ir_rc5_timer_end(unsigned long data)
{
@@ -330,20 +322,20 @@
/* Allow some timer jitter (RC5 is ~24ms anyway so this is ok) */
if (gap < 28000) {
- dprintk(1, "ir-common: spurious timer_end\n");
+ IR_dprintk(1, "ir-common: spurious timer_end\n");
return;
}
if (ir->last_bit < 20) {
/* ignore spurious codes (caused by light/other remotes) */
- dprintk(1, "ir-common: short code: %x\n", ir->code);
+ IR_dprintk(1, "ir-common: short code: %x\n", ir->code);
} else {
ir->code = (ir->code << ir->shift_by) | 1;
rc5 = ir_rc5_decode(ir->code);
/* two start bits? */
if (RC5_START(rc5) != ir->start) {
- dprintk(1, "ir-common: rc5 start bits invalid: %u\n", RC5_START(rc5));
+ IR_dprintk(1, "ir-common: rc5 start bits invalid: %u\n", RC5_START(rc5));
/* right address? */
} else if (RC5_ADDR(rc5) == ir->addr) {
@@ -353,11 +345,10 @@
/* Good code, decide if repeat/repress */
if (toggle != RC5_TOGGLE(ir->last_rc5) ||
instr != RC5_INSTR(ir->last_rc5)) {
- dprintk(1, "ir-common: instruction %x, toggle %x\n", instr,
+ IR_dprintk(1, "ir-common: instruction %x, toggle %x\n", instr,
toggle);
ir_input_nokey(ir->dev, &ir->ir);
- ir_input_keydown(ir->dev, &ir->ir, instr,
- instr);
+ ir_input_keydown(ir->dev, &ir->ir, instr);
}
/* Set/reset key-up timer */
@@ -376,7 +367,7 @@
{
struct card_ir *ir = (struct card_ir *)data;
- dprintk(1, "ir-common: key released\n");
+ IR_dprintk(1, "ir-common: key released\n");
ir_input_nokey(ir->dev, &ir->ir);
}
EXPORT_SYMBOL_GPL(ir_rc5_timer_keyup);
diff --git a/drivers/media/common/ir-keymaps.c b/drivers/media/common/ir-keymaps.c
index f679017..328c973 100644
--- a/drivers/media/common/ir-keymaps.c
+++ b/drivers/media/common/ir-keymaps.c
@@ -1705,6 +1705,7 @@
{ 0x37, KEY_RADIO }, /* FM */
{ 0x38, KEY_DVD },
+ { 0x1a, KEY_MODE}, /* change to MCE mode on Y04G0051 */
{ 0x3e, KEY_F21 }, /* MCE +VOL, on Y04G0033 */
{ 0x3a, KEY_F22 }, /* MCE -VOL, on Y04G0033 */
{ 0x3b, KEY_F23 }, /* MCE +CH, on Y04G0033 */
@@ -1846,6 +1847,76 @@
};
EXPORT_SYMBOL_GPL(ir_codes_hauppauge_new_table);
+/*
+ * Hauppauge:the newer, gray remotes (seems there are multiple
+ * slightly different versions), shipped with cx88+ivtv cards.
+ *
+ * This table contains the complete RC5 code, instead of just the data part
+ */
+static struct ir_scancode ir_codes_rc5_hauppauge_new[] = {
+ /* Keys 0 to 9 */
+ { 0x1e00, KEY_0 },
+ { 0x1e01, KEY_1 },
+ { 0x1e02, KEY_2 },
+ { 0x1e03, KEY_3 },
+ { 0x1e04, KEY_4 },
+ { 0x1e05, KEY_5 },
+ { 0x1e06, KEY_6 },
+ { 0x1e07, KEY_7 },
+ { 0x1e08, KEY_8 },
+ { 0x1e09, KEY_9 },
+
+ { 0x1e0a, KEY_TEXT }, /* keypad asterisk as well */
+ { 0x1e0b, KEY_RED }, /* red button */
+ { 0x1e0c, KEY_RADIO },
+ { 0x1e0d, KEY_MENU },
+ { 0x1e0e, KEY_SUBTITLE }, /* also the # key */
+ { 0x1e0f, KEY_MUTE },
+ { 0x1e10, KEY_VOLUMEUP },
+ { 0x1e11, KEY_VOLUMEDOWN },
+ { 0x1e12, KEY_PREVIOUS }, /* previous channel */
+ { 0x1e14, KEY_UP },
+ { 0x1e15, KEY_DOWN },
+ { 0x1e16, KEY_LEFT },
+ { 0x1e17, KEY_RIGHT },
+ { 0x1e18, KEY_VIDEO }, /* Videos */
+ { 0x1e19, KEY_AUDIO }, /* Music */
+ /* 0x1e1a: Pictures - presume this means
+ "Multimedia Home Platform" -
+ no "PICTURES" key in input.h
+ */
+ { 0x1e1a, KEY_MHP },
+
+ { 0x1e1b, KEY_EPG }, /* Guide */
+ { 0x1e1c, KEY_TV },
+ { 0x1e1e, KEY_NEXTSONG }, /* skip >| */
+ { 0x1e1f, KEY_EXIT }, /* back/exit */
+ { 0x1e20, KEY_CHANNELUP }, /* channel / program + */
+ { 0x1e21, KEY_CHANNELDOWN }, /* channel / program - */
+ { 0x1e22, KEY_CHANNEL }, /* source (old black remote) */
+ { 0x1e24, KEY_PREVIOUSSONG }, /* replay |< */
+ { 0x1e25, KEY_ENTER }, /* OK */
+ { 0x1e26, KEY_SLEEP }, /* minimize (old black remote) */
+ { 0x1e29, KEY_BLUE }, /* blue key */
+ { 0x1e2e, KEY_GREEN }, /* green button */
+ { 0x1e30, KEY_PAUSE }, /* pause */
+ { 0x1e32, KEY_REWIND }, /* backward << */
+ { 0x1e34, KEY_FASTFORWARD }, /* forward >> */
+ { 0x1e35, KEY_PLAY },
+ { 0x1e36, KEY_STOP },
+ { 0x1e37, KEY_RECORD }, /* recording */
+ { 0x1e38, KEY_YELLOW }, /* yellow key */
+ { 0x1e3b, KEY_SELECT }, /* top right button */
+ { 0x1e3c, KEY_ZOOM }, /* full */
+ { 0x1e3d, KEY_POWER }, /* system power (green button) */
+};
+
+struct ir_scancode_table ir_codes_rc5_hauppauge_new_table = {
+ .scan = ir_codes_rc5_hauppauge_new,
+ .size = ARRAY_SIZE(ir_codes_rc5_hauppauge_new),
+};
+EXPORT_SYMBOL_GPL(ir_codes_rc5_hauppauge_new_table);
+
static struct ir_scancode ir_codes_npgtech[] = {
{ 0x1d, KEY_SWITCHVIDEOMODE }, /* switch inputs */
{ 0x2a, KEY_FRONT },
@@ -2964,6 +3035,101 @@
};
EXPORT_SYMBOL_GPL(ir_codes_dm1105_nec_table);
+static struct ir_scancode ir_codes_tevii_nec[] = {
+ { 0x0a, KEY_POWER2},
+ { 0x0c, KEY_MUTE},
+ { 0x11, KEY_1},
+ { 0x12, KEY_2},
+ { 0x13, KEY_3},
+ { 0x14, KEY_4},
+ { 0x15, KEY_5},
+ { 0x16, KEY_6},
+ { 0x17, KEY_7},
+ { 0x18, KEY_8},
+ { 0x19, KEY_9},
+ { 0x10, KEY_0},
+ { 0x1c, KEY_MENU},
+ { 0x0f, KEY_VOLUMEDOWN},
+ { 0x1a, KEY_LAST},
+ { 0x0e, KEY_OPEN},
+ { 0x04, KEY_RECORD},
+ { 0x09, KEY_VOLUMEUP},
+ { 0x08, KEY_CHANNELUP},
+ { 0x07, KEY_PVR},
+ { 0x0b, KEY_TIME},
+ { 0x02, KEY_RIGHT},
+ { 0x03, KEY_LEFT},
+ { 0x00, KEY_UP},
+ { 0x1f, KEY_OK},
+ { 0x01, KEY_DOWN},
+ { 0x05, KEY_TUNER},
+ { 0x06, KEY_CHANNELDOWN},
+ { 0x40, KEY_PLAYPAUSE},
+ { 0x1e, KEY_REWIND},
+ { 0x1b, KEY_FAVORITES},
+ { 0x1d, KEY_BACK},
+ { 0x4d, KEY_FASTFORWARD},
+ { 0x44, KEY_EPG},
+ { 0x4c, KEY_INFO},
+ { 0x41, KEY_AB},
+ { 0x43, KEY_AUDIO},
+ { 0x45, KEY_SUBTITLE},
+ { 0x4a, KEY_LIST},
+ { 0x46, KEY_F1},
+ { 0x47, KEY_F2},
+ { 0x5e, KEY_F3},
+ { 0x5c, KEY_F4},
+ { 0x52, KEY_F5},
+ { 0x5a, KEY_F6},
+ { 0x56, KEY_MODE},
+ { 0x58, KEY_SWITCHVIDEOMODE},
+};
+struct ir_scancode_table ir_codes_tevii_nec_table = {
+ .scan = ir_codes_tevii_nec,
+ .size = ARRAY_SIZE(ir_codes_tevii_nec),
+};
+EXPORT_SYMBOL_GPL(ir_codes_tevii_nec_table);
+
+static struct ir_scancode ir_codes_tbs_nec[] = {
+ { 0x04, KEY_POWER2}, /*power*/
+ { 0x14, KEY_MUTE}, /*mute*/
+ { 0x07, KEY_1},
+ { 0x06, KEY_2},
+ { 0x05, KEY_3},
+ { 0x0b, KEY_4},
+ { 0x0a, KEY_5},
+ { 0x09, KEY_6},
+ { 0x0f, KEY_7},
+ { 0x0e, KEY_8},
+ { 0x0d, KEY_9},
+ { 0x12, KEY_0},
+ { 0x16, KEY_CHANNELUP}, /*ch+*/
+ { 0x11, KEY_CHANNELDOWN},/*ch-*/
+ { 0x13, KEY_VOLUMEUP}, /*vol+*/
+ { 0x0c, KEY_VOLUMEDOWN},/*vol-*/
+ { 0x03, KEY_RECORD}, /*rec*/
+ { 0x18, KEY_PAUSE}, /*pause*/
+ { 0x19, KEY_OK}, /*ok*/
+ { 0x1a, KEY_CAMERA}, /* snapshot */
+ { 0x01, KEY_UP},
+ { 0x10, KEY_LEFT},
+ { 0x02, KEY_RIGHT},
+ { 0x08, KEY_DOWN},
+ { 0x15, KEY_FAVORITES},
+ { 0x17, KEY_SUBTITLE},
+ { 0x1d, KEY_ZOOM},
+ { 0x1f, KEY_EXIT},
+ { 0x1e, KEY_MENU},
+ { 0x1c, KEY_EPG},
+ { 0x00, KEY_PREVIOUS},
+ { 0x1b, KEY_MODE},
+};
+struct ir_scancode_table ir_codes_tbs_nec_table = {
+ .scan = ir_codes_tbs_nec,
+ .size = ARRAY_SIZE(ir_codes_tbs_nec),
+};
+EXPORT_SYMBOL_GPL(ir_codes_tbs_nec_table);
+
/* Terratec Cinergy Hybrid T USB XS
Devin Heitmueller <dheitmueller@linuxtv.org>
*/
@@ -3147,3 +3313,4 @@
.size = ARRAY_SIZE(ir_codes_gadmei_rm008z),
};
EXPORT_SYMBOL_GPL(ir_codes_gadmei_rm008z_table);
+
diff --git a/drivers/media/common/ir-keytable.c b/drivers/media/common/ir-keytable.c
new file mode 100644
index 0000000..26ce5bc
--- /dev/null
+++ b/drivers/media/common/ir-keytable.c
@@ -0,0 +1,429 @@
+/* ir-register.c - handle IR scancode->keycode tables
+ *
+ * Copyright (C) 2009 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ */
+
+#include <linux/usb/input.h>
+
+#include <media/ir-common.h>
+
+#define IR_TAB_MIN_SIZE 32
+#define IR_TAB_MAX_SIZE 1024
+
+/**
+ * ir_seek_table() - returns the element order on the table
+ * @rc_tab: the ir_scancode_table with the keymap to be used
+ * @scancode: the scancode that we're seeking
+ *
+ * This routine is used by the input routines when a key is pressed at the
+ * IR. The scancode is received and needs to be converted into a keycode.
+ * If the key is not found, it returns KEY_UNKNOWN. Otherwise, returns the
+ * corresponding keycode from the table.
+ */
+static int ir_seek_table(struct ir_scancode_table *rc_tab, u32 scancode)
+{
+ int rc;
+ unsigned long flags;
+ struct ir_scancode *keymap = rc_tab->scan;
+
+ spin_lock_irqsave(&rc_tab->lock, flags);
+
+ /* FIXME: replace it by a binary search */
+
+ for (rc = 0; rc < rc_tab->size; rc++)
+ if (keymap[rc].scancode == scancode)
+ goto exit;
+
+ /* Not found */
+ rc = -EINVAL;
+
+exit:
+ spin_unlock_irqrestore(&rc_tab->lock, flags);
+ return rc;
+}
+
+/**
+ * ir_roundup_tablesize() - gets an optimum value for the table size
+ * @n_elems: minimum number of entries to store keycodes
+ *
+ * This routine is used to choose the keycode table size.
+ *
+ * In order to have some empty space for new keycodes,
+ * and knowing in advance that kmalloc allocates only power of two
+ * segments, it optimizes the allocated space to have some spare space
+ * for those new keycodes by using the maximum number of entries that
+ * will be effectively be allocated by kmalloc.
+ * In order to reduce the quantity of table resizes, it has a minimum
+ * table size of IR_TAB_MIN_SIZE.
+ */
+int ir_roundup_tablesize(int n_elems)
+{
+ size_t size;
+
+ if (n_elems < IR_TAB_MIN_SIZE)
+ n_elems = IR_TAB_MIN_SIZE;
+
+ /*
+ * As kmalloc only allocates sizes of power of two, get as
+ * much entries as possible for the allocated memory segment
+ */
+ size = roundup_pow_of_two(n_elems * sizeof(struct ir_scancode));
+ n_elems = size / sizeof(struct ir_scancode);
+
+ return n_elems;
+}
+
+/**
+ * ir_copy_table() - copies a keytable, discarding the unused entries
+ * @destin: destin table
+ * @origin: origin table
+ *
+ * Copies all entries where the keycode is not KEY_UNKNOWN/KEY_RESERVED
+ */
+
+int ir_copy_table(struct ir_scancode_table *destin,
+ const struct ir_scancode_table *origin)
+{
+ int i, j = 0;
+
+ for (i = 0; i < origin->size; i++) {
+ if (origin->scan[i].keycode == KEY_UNKNOWN ||
+ origin->scan[i].keycode == KEY_RESERVED)
+ continue;
+
+ memcpy(&destin->scan[j], &origin->scan[i], sizeof(struct ir_scancode));
+ j++;
+ }
+ destin->size = j;
+
+ IR_dprintk(1, "Copied %d scancodes to the new keycode table\n", destin->size);
+
+ return 0;
+}
+
+/**
+ * ir_getkeycode() - get a keycode at the evdev scancode ->keycode table
+ * @dev: the struct input_dev device descriptor
+ * @scancode: the desired scancode
+ * @keycode: the keycode to be retorned.
+ *
+ * This routine is used to handle evdev EVIOCGKEY ioctl.
+ * If the key is not found, returns -EINVAL, otherwise, returns 0.
+ */
+static int ir_getkeycode(struct input_dev *dev,
+ int scancode, int *keycode)
+{
+ int elem;
+ struct ir_scancode_table *rc_tab = input_get_drvdata(dev);
+
+ elem = ir_seek_table(rc_tab, scancode);
+ if (elem >= 0) {
+ *keycode = rc_tab->scan[elem].keycode;
+ return 0;
+ }
+
+ /*
+ * Scancode not found and table can't be expanded
+ */
+ if (elem < 0 && rc_tab->size == IR_TAB_MAX_SIZE)
+ return -EINVAL;
+
+ /*
+ * If is there extra space, returns KEY_RESERVED,
+ * otherwise, input core won't let ir_setkeycode to work
+ */
+ *keycode = KEY_RESERVED;
+ return 0;
+}
+
+
+/**
+ * ir_is_resize_needed() - Check if the table needs rezise
+ * @table: keycode table that may need to resize
+ * @n_elems: minimum number of entries to store keycodes
+ *
+ * Considering that kmalloc uses power of two storage areas, this
+ * routine detects if the real alloced size will change. If not, it
+ * just returns without doing nothing. Otherwise, it will extend or
+ * reduce the table size to meet the new needs.
+ *
+ * It returns 0 if no resize is needed, 1 otherwise.
+ */
+static int ir_is_resize_needed(struct ir_scancode_table *table, int n_elems)
+{
+ int cur_size = ir_roundup_tablesize(table->size);
+ int new_size = ir_roundup_tablesize(n_elems);
+
+ if (cur_size == new_size)
+ return 0;
+
+ /* Resize is needed */
+ return 1;
+}
+
+/**
+ * ir_delete_key() - remove a keycode from the table
+ * @rc_tab: keycode table
+ * @elem: element to be removed
+ *
+ */
+static void ir_delete_key(struct ir_scancode_table *rc_tab, int elem)
+{
+ unsigned long flags = 0;
+ int newsize = rc_tab->size - 1;
+ int resize = ir_is_resize_needed(rc_tab, newsize);
+ struct ir_scancode *oldkeymap = rc_tab->scan;
+ struct ir_scancode *newkeymap;
+
+ if (resize) {
+ newkeymap = kzalloc(ir_roundup_tablesize(newsize) *
+ sizeof(*newkeymap), GFP_ATOMIC);
+
+ /* There's no memory for resize. Keep the old table */
+ if (!newkeymap)
+ resize = 0;
+ }
+
+ if (!resize) {
+ newkeymap = oldkeymap;
+
+ /* We'll modify the live table. Lock it */
+ spin_lock_irqsave(&rc_tab->lock, flags);
+ }
+
+ /*
+ * Copy the elements before the one that will be deleted
+ * if (!resize), both oldkeymap and newkeymap points
+ * to the same place, so, there's no need to copy
+ */
+ if (resize && elem > 0)
+ memcpy(newkeymap, oldkeymap,
+ elem * sizeof(*newkeymap));
+
+ /*
+ * Copy the other elements overwriting the element to be removed
+ * This operation applies to both resize and non-resize case
+ */
+ if (elem < newsize)
+ memcpy(&newkeymap[elem], &oldkeymap[elem + 1],
+ (newsize - elem) * sizeof(*newkeymap));
+
+ if (resize) {
+ /*
+ * As the copy happened to a temporary table, only here
+ * it needs to lock while replacing the table pointers
+ * to use the new table
+ */
+ spin_lock_irqsave(&rc_tab->lock, flags);
+ rc_tab->size = newsize;
+ rc_tab->scan = newkeymap;
+ spin_unlock_irqrestore(&rc_tab->lock, flags);
+
+ /* Frees the old keytable */
+ kfree(oldkeymap);
+ } else {
+ rc_tab->size = newsize;
+ spin_unlock_irqrestore(&rc_tab->lock, flags);
+ }
+}
+
+/**
+ * ir_insert_key() - insert a keycode at the table
+ * @rc_tab: keycode table
+ * @scancode: the desired scancode
+ * @keycode: the keycode to be retorned.
+ *
+ */
+static int ir_insert_key(struct ir_scancode_table *rc_tab,
+ int scancode, int keycode)
+{
+ unsigned long flags;
+ int elem = rc_tab->size;
+ int newsize = rc_tab->size + 1;
+ int resize = ir_is_resize_needed(rc_tab, newsize);
+ struct ir_scancode *oldkeymap = rc_tab->scan;
+ struct ir_scancode *newkeymap;
+
+ if (resize) {
+ newkeymap = kzalloc(ir_roundup_tablesize(newsize) *
+ sizeof(*newkeymap), GFP_ATOMIC);
+ if (!newkeymap)
+ return -ENOMEM;
+
+ memcpy(newkeymap, oldkeymap,
+ rc_tab->size * sizeof(*newkeymap));
+ } else
+ newkeymap = oldkeymap;
+
+ /* Stores the new code at the table */
+ IR_dprintk(1, "#%d: New scan 0x%04x with key 0x%04x\n",
+ rc_tab->size, scancode, keycode);
+
+ spin_lock_irqsave(&rc_tab->lock, flags);
+ rc_tab->size = newsize;
+ if (resize) {
+ rc_tab->scan = newkeymap;
+ kfree(oldkeymap);
+ }
+ newkeymap[elem].scancode = scancode;
+ newkeymap[elem].keycode = keycode;
+ spin_unlock_irqrestore(&rc_tab->lock, flags);
+
+ return 0;
+}
+
+/**
+ * ir_setkeycode() - set a keycode at the evdev scancode ->keycode table
+ * @dev: the struct input_dev device descriptor
+ * @scancode: the desired scancode
+ * @keycode: the keycode to be retorned.
+ *
+ * This routine is used to handle evdev EVIOCSKEY ioctl.
+ * There's one caveat here: how can we increase the size of the table?
+ * If the key is not found, returns -EINVAL, otherwise, returns 0.
+ */
+static int ir_setkeycode(struct input_dev *dev,
+ int scancode, int keycode)
+{
+ int rc = 0;
+ struct ir_scancode_table *rc_tab = input_get_drvdata(dev);
+ struct ir_scancode *keymap = rc_tab->scan;
+ unsigned long flags;
+
+ /*
+ * Handle keycode table deletions
+ *
+ * If userspace is adding a KEY_UNKNOWN or KEY_RESERVED,
+ * deal as a trial to remove an existing scancode attribution
+ * if table become too big, reduce it to save space
+ */
+ if (keycode == KEY_UNKNOWN || keycode == KEY_RESERVED) {
+ rc = ir_seek_table(rc_tab, scancode);
+ if (rc < 0)
+ return 0;
+
+ IR_dprintk(1, "#%d: Deleting scan 0x%04x\n", rc, scancode);
+ clear_bit(keymap[rc].keycode, dev->keybit);
+ ir_delete_key(rc_tab, rc);
+
+ return 0;
+ }
+
+ /*
+ * Handle keycode replacements
+ *
+ * If the scancode exists, just replace by the new value
+ */
+ rc = ir_seek_table(rc_tab, scancode);
+ if (rc >= 0) {
+ IR_dprintk(1, "#%d: Replacing scan 0x%04x with key 0x%04x\n",
+ rc, scancode, keycode);
+
+ clear_bit(keymap[rc].keycode, dev->keybit);
+
+ spin_lock_irqsave(&rc_tab->lock, flags);
+ keymap[rc].keycode = keycode;
+ spin_unlock_irqrestore(&rc_tab->lock, flags);
+
+ set_bit(keycode, dev->keybit);
+
+ return 0;
+ }
+
+ /*
+ * Handle new scancode inserts
+ *
+ * reallocate table if needed and insert a new keycode
+ */
+
+ /* Avoid growing the table indefinitely */
+ if (rc_tab->size + 1 > IR_TAB_MAX_SIZE)
+ return -EINVAL;
+
+ rc = ir_insert_key(rc_tab, scancode, keycode);
+ if (rc < 0)
+ return rc;
+ set_bit(keycode, dev->keybit);
+
+ return 0;
+}
+
+/**
+ * ir_g_keycode_from_table() - gets the keycode that corresponds to a scancode
+ * @input_dev: the struct input_dev descriptor of the device
+ * @scancode: the scancode that we're seeking
+ *
+ * This routine is used by the input routines when a key is pressed at the
+ * IR. The scancode is received and needs to be converted into a keycode.
+ * If the key is not found, it returns KEY_UNKNOWN. Otherwise, returns the
+ * corresponding keycode from the table.
+ */
+u32 ir_g_keycode_from_table(struct input_dev *dev, u32 scancode)
+{
+ struct ir_scancode_table *rc_tab = input_get_drvdata(dev);
+ struct ir_scancode *keymap = rc_tab->scan;
+ int elem;
+
+ elem = ir_seek_table(rc_tab, scancode);
+ if (elem >= 0) {
+ IR_dprintk(1, "%s: scancode 0x%04x keycode 0x%02x\n",
+ dev->name, scancode, keymap[elem].keycode);
+
+ return rc_tab->scan[elem].keycode;
+ }
+
+ printk(KERN_INFO "%s: unknown key for scancode 0x%04x\n",
+ dev->name, scancode);
+
+ /* Reports userspace that an unknown keycode were got */
+ return KEY_RESERVED;
+}
+
+/**
+ * ir_set_keycode_table() - sets the IR keycode table and add the handlers
+ * for keymap table get/set
+ * @input_dev: the struct input_dev descriptor of the device
+ * @rc_tab: the struct ir_scancode_table table of scancode/keymap
+ *
+ * This routine is used to initialize the input infrastructure to work with
+ * an IR.
+ * It should be called before registering the IR device.
+ */
+int ir_set_keycode_table(struct input_dev *input_dev,
+ struct ir_scancode_table *rc_tab)
+{
+ struct ir_scancode *keymap = rc_tab->scan;
+ int i;
+
+ spin_lock_init(&rc_tab->lock);
+
+ if (rc_tab->scan == NULL || !rc_tab->size)
+ return -EINVAL;
+
+ /* set the bits for the keys */
+ IR_dprintk(1, "key map size: %d\n", rc_tab->size);
+ for (i = 0; i < rc_tab->size; i++) {
+ IR_dprintk(1, "#%d: setting bit for keycode 0x%04x\n",
+ i, keymap[i].keycode);
+ set_bit(keymap[i].keycode, input_dev->keybit);
+ }
+
+ input_dev->getkeycode = ir_getkeycode;
+ input_dev->setkeycode = ir_setkeycode;
+ input_set_drvdata(input_dev, rc_tab);
+
+ return 0;
+}
+
+void ir_input_free(struct input_dev *dev)
+{
+ struct ir_scancode_table *rc_tab = input_get_drvdata(dev);
+
+ IR_dprintk(1, "Freed keycode table\n");
+
+ rc_tab->size = 0;
+ kfree(rc_tab->scan);
+ rc_tab->scan = NULL;
+}
+EXPORT_SYMBOL_GPL(ir_input_free);
+
diff --git a/drivers/media/common/saa7146_i2c.c b/drivers/media/common/saa7146_i2c.c
index 7e8f568..48cb154 100644
--- a/drivers/media/common/saa7146_i2c.c
+++ b/drivers/media/common/saa7146_i2c.c
@@ -98,7 +98,7 @@
op_count++;
- /* loop throgh all bytes of message i */
+ /* loop through all bytes of message i */
for(j = 0; j < m[i].len; j++) {
/* write back all bytes that could have been read */
m[i].buf[j] = (le32_to_cpu(op[op_count/3]) >> ((3-(op_count%3))*8));
diff --git a/drivers/media/common/saa7146_video.c b/drivers/media/common/saa7146_video.c
index 552dab4..becbaad 100644
--- a/drivers/media/common/saa7146_video.c
+++ b/drivers/media/common/saa7146_video.c
@@ -1205,6 +1205,13 @@
return 0;
}
+static void release_all_pagetables(struct saa7146_dev *dev, struct saa7146_buf *buf)
+{
+ saa7146_pgtable_free(dev->pci, &buf->pt[0]);
+ saa7146_pgtable_free(dev->pci, &buf->pt[1]);
+ saa7146_pgtable_free(dev->pci, &buf->pt[2]);
+}
+
static int buffer_prepare(struct videobuf_queue *q,
struct videobuf_buffer *vb, enum v4l2_field field)
{
@@ -1257,16 +1264,12 @@
sfmt = format_by_fourcc(dev,buf->fmt->pixelformat);
+ release_all_pagetables(dev, buf);
if( 0 != IS_PLANAR(sfmt->trans)) {
- saa7146_pgtable_free(dev->pci, &buf->pt[0]);
- saa7146_pgtable_free(dev->pci, &buf->pt[1]);
- saa7146_pgtable_free(dev->pci, &buf->pt[2]);
-
saa7146_pgtable_alloc(dev->pci, &buf->pt[0]);
saa7146_pgtable_alloc(dev->pci, &buf->pt[1]);
saa7146_pgtable_alloc(dev->pci, &buf->pt[2]);
} else {
- saa7146_pgtable_free(dev->pci, &buf->pt[0]);
saa7146_pgtable_alloc(dev->pci, &buf->pt[0]);
}
@@ -1329,6 +1332,9 @@
struct saa7146_buf *buf = (struct saa7146_buf *)vb;
DEB_CAP(("vbuf:%p\n",vb));
+
+ release_all_pagetables(dev, buf);
+
saa7146_dma_free(dev,q,buf);
}
diff --git a/drivers/media/common/tuners/Kconfig b/drivers/media/common/tuners/Kconfig
index 607d319..409a426 100644
--- a/drivers/media/common/tuners/Kconfig
+++ b/drivers/media/common/tuners/Kconfig
@@ -172,4 +172,11 @@
help
Say Y here to support the Freescale MC44S803 based tuners
+config MEDIA_TUNER_MAX2165
+ tristate "Maxim MAX2165 silicon tuner"
+ depends on VIDEO_MEDIA && I2C
+ default m if MEDIA_TUNER_CUSTOMISE
+ help
+ A driver for the silicon tuner MAX2165 from Maxim.
+
endif # MEDIA_TUNER_CUSTOMISE
diff --git a/drivers/media/common/tuners/Makefile b/drivers/media/common/tuners/Makefile
index 4132b2b..a543852 100644
--- a/drivers/media/common/tuners/Makefile
+++ b/drivers/media/common/tuners/Makefile
@@ -23,6 +23,7 @@
obj-$(CONFIG_MEDIA_TUNER_MXL5005S) += mxl5005s.o
obj-$(CONFIG_MEDIA_TUNER_MXL5007T) += mxl5007t.o
obj-$(CONFIG_MEDIA_TUNER_MC44S803) += mc44s803.o
+obj-$(CONFIG_MEDIA_TUNER_MAX2165) += max2165.o
EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core
EXTRA_CFLAGS += -Idrivers/media/dvb/frontends
diff --git a/drivers/media/common/tuners/max2165.c b/drivers/media/common/tuners/max2165.c
new file mode 100644
index 0000000..3d03640
--- /dev/null
+++ b/drivers/media/common/tuners/max2165.c
@@ -0,0 +1,442 @@
+/*
+ * Driver for Maxim MAX2165 silicon tuner
+ *
+ * Copyright (c) 2009 David T. L. Wong <davidtlwong@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/videodev2.h>
+#include <linux/delay.h>
+#include <linux/dvb/frontend.h>
+#include <linux/i2c.h>
+
+#include "dvb_frontend.h"
+
+#include "max2165.h"
+#include "max2165_priv.h"
+#include "tuner-i2c.h"
+
+#define dprintk(args...) \
+ do { \
+ if (debug) \
+ printk(KERN_DEBUG "max2165: " args); \
+ } while (0)
+
+static int debug;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off).");
+
+static int max2165_write_reg(struct max2165_priv *priv, u8 reg, u8 data)
+{
+ int ret;
+ u8 buf[] = { reg, data };
+ struct i2c_msg msg = { .flags = 0, .buf = buf, .len = 2 };
+
+ msg.addr = priv->config->i2c_address;
+
+ if (debug >= 2)
+ printk(KERN_DEBUG "%s: reg=0x%02X, data=0x%02X\n",
+ __func__, reg, data);
+
+ ret = i2c_transfer(priv->i2c, &msg, 1);
+
+ if (ret != 1)
+ dprintk(KERN_DEBUG "%s: error reg=0x%x, data=0x%x, ret=%i\n",
+ __func__, reg, data, ret);
+
+ return (ret != 1) ? -EIO : 0;
+}
+
+static int max2165_read_reg(struct max2165_priv *priv, u8 reg, u8 *p_data)
+{
+ int ret;
+ u8 dev_addr = priv->config->i2c_address;
+
+ u8 b0[] = { reg };
+ u8 b1[] = { 0 };
+ struct i2c_msg msg[] = {
+ { .addr = dev_addr, .flags = 0, .buf = b0, .len = 1 },
+ { .addr = dev_addr, .flags = I2C_M_RD, .buf = b1, .len = 1 },
+ };
+
+ ret = i2c_transfer(priv->i2c, msg, 2);
+ if (ret != 2) {
+ dprintk(KERN_DEBUG "%s: error reg=0x%x, ret=%i\n",
+ __func__, reg, ret);
+ return -EIO;
+ }
+
+ *p_data = b1[0];
+ if (debug >= 2)
+ printk(KERN_DEBUG "%s: reg=0x%02X, data=0x%02X\n",
+ __func__, reg, b1[0]);
+ return 0;
+}
+
+static int max2165_mask_write_reg(struct max2165_priv *priv, u8 reg,
+ u8 mask, u8 data)
+{
+ int ret;
+ u8 v;
+
+ data &= mask;
+ ret = max2165_read_reg(priv, reg, &v);
+ if (ret != 0)
+ return ret;
+ v &= ~mask;
+ v |= data;
+ ret = max2165_write_reg(priv, reg, v);
+
+ return ret;
+}
+
+static int max2165_read_rom_table(struct max2165_priv *priv)
+{
+ u8 dat[3];
+ int i;
+
+ for (i = 0; i < 3; i++) {
+ max2165_write_reg(priv, REG_ROM_TABLE_ADDR, i + 1);
+ max2165_read_reg(priv, REG_ROM_TABLE_DATA, &dat[i]);
+ }
+
+ priv->tf_ntch_low_cfg = dat[0] >> 4;
+ priv->tf_ntch_hi_cfg = dat[0] & 0x0F;
+ priv->tf_balun_low_ref = dat[1] & 0x0F;
+ priv->tf_balun_hi_ref = dat[1] >> 4;
+ priv->bb_filter_7mhz_cfg = dat[2] & 0x0F;
+ priv->bb_filter_8mhz_cfg = dat[2] >> 4;
+
+ dprintk("tf_ntch_low_cfg = 0x%X\n", priv->tf_ntch_low_cfg);
+ dprintk("tf_ntch_hi_cfg = 0x%X\n", priv->tf_ntch_hi_cfg);
+ dprintk("tf_balun_low_ref = 0x%X\n", priv->tf_balun_low_ref);
+ dprintk("tf_balun_hi_ref = 0x%X\n", priv->tf_balun_hi_ref);
+ dprintk("bb_filter_7mhz_cfg = 0x%X\n", priv->bb_filter_7mhz_cfg);
+ dprintk("bb_filter_8mhz_cfg = 0x%X\n", priv->bb_filter_8mhz_cfg);
+
+ return 0;
+}
+
+static int max2165_set_osc(struct max2165_priv *priv, u8 osc /*MHz*/)
+{
+ u8 v;
+
+ v = (osc / 2);
+ if (v == 2)
+ v = 0x7;
+ else
+ v -= 8;
+
+ max2165_mask_write_reg(priv, REG_PLL_CFG, 0x07, v);
+
+ return 0;
+}
+
+static int max2165_set_bandwidth(struct max2165_priv *priv, u32 bw)
+{
+ u8 val;
+
+ if (bw == BANDWIDTH_8_MHZ)
+ val = priv->bb_filter_8mhz_cfg;
+ else
+ val = priv->bb_filter_7mhz_cfg;
+
+ max2165_mask_write_reg(priv, REG_BASEBAND_CTRL, 0xF0, val << 4);
+
+ return 0;
+}
+
+int fixpt_div32(u32 dividend, u32 divisor, u32 *quotient, u32 *fraction)
+{
+ u32 remainder;
+ u32 q, f = 0;
+ int i;
+
+ if (0 == divisor)
+ return -1;
+
+ q = dividend / divisor;
+ remainder = dividend - q * divisor;
+
+ for (i = 0; i < 31; i++) {
+ remainder <<= 1;
+ if (remainder >= divisor) {
+ f += 1;
+ remainder -= divisor;
+ }
+ f <<= 1;
+ }
+
+ *quotient = q;
+ *fraction = f;
+
+ return 0;
+}
+
+static int max2165_set_rf(struct max2165_priv *priv, u32 freq)
+{
+ u8 tf;
+ u8 tf_ntch;
+ u32 t;
+ u32 quotient, fraction;
+
+ /* Set PLL divider according to RF frequency */
+ fixpt_div32(freq / 1000, priv->config->osc_clk * 1000,
+ "ient, &fraction);
+
+ /* 20-bit fraction */
+ fraction >>= 12;
+
+ max2165_write_reg(priv, REG_NDIV_INT, quotient);
+ max2165_mask_write_reg(priv, REG_NDIV_FRAC2, 0x0F, fraction >> 16);
+ max2165_write_reg(priv, REG_NDIV_FRAC1, fraction >> 8);
+ max2165_write_reg(priv, REG_NDIV_FRAC0, fraction);
+
+ /* Norch Filter */
+ tf_ntch = (freq < 725000000) ?
+ priv->tf_ntch_low_cfg : priv->tf_ntch_hi_cfg;
+
+ /* Tracking filter balun */
+ t = priv->tf_balun_low_ref;
+ t += (priv->tf_balun_hi_ref - priv->tf_balun_low_ref)
+ * (freq / 1000 - 470000) / (780000 - 470000);
+
+ tf = t;
+ dprintk("tf = %X\n", tf);
+ tf |= tf_ntch << 4;
+
+ max2165_write_reg(priv, REG_TRACK_FILTER, tf);
+
+ return 0;
+}
+
+static void max2165_debug_status(struct max2165_priv *priv)
+{
+ u8 status, autotune;
+ u8 auto_vco_success, auto_vco_active;
+ u8 pll_locked;
+ u8 dc_offset_low, dc_offset_hi;
+ u8 signal_lv_over_threshold;
+ u8 vco, vco_sub_band, adc;
+
+ max2165_read_reg(priv, REG_STATUS, &status);
+ max2165_read_reg(priv, REG_AUTOTUNE, &autotune);
+
+ auto_vco_success = (status >> 6) & 0x01;
+ auto_vco_active = (status >> 5) & 0x01;
+ pll_locked = (status >> 4) & 0x01;
+ dc_offset_low = (status >> 3) & 0x01;
+ dc_offset_hi = (status >> 2) & 0x01;
+ signal_lv_over_threshold = status & 0x01;
+
+ vco = autotune >> 6;
+ vco_sub_band = (autotune >> 3) & 0x7;
+ adc = autotune & 0x7;
+
+ dprintk("auto VCO active: %d, auto VCO success: %d\n",
+ auto_vco_active, auto_vco_success);
+ dprintk("PLL locked: %d\n", pll_locked);
+ dprintk("DC offset low: %d, DC offset high: %d\n",
+ dc_offset_low, dc_offset_hi);
+ dprintk("Signal lvl over threshold: %d\n", signal_lv_over_threshold);
+ dprintk("VCO: %d, VCO Sub-band: %d, ADC: %d\n", vco, vco_sub_band, adc);
+}
+
+static int max2165_set_params(struct dvb_frontend *fe,
+ struct dvb_frontend_parameters *params)
+{
+ struct max2165_priv *priv = fe->tuner_priv;
+ int ret;
+
+ dprintk("%s() frequency=%d (Hz)\n", __func__, params->frequency);
+ if (fe->ops.info.type == FE_ATSC) {
+ return -EINVAL;
+ } else if (fe->ops.info.type == FE_OFDM) {
+ dprintk("%s() OFDM\n", __func__);
+ switch (params->u.ofdm.bandwidth) {
+ case BANDWIDTH_6_MHZ:
+ return -EINVAL;
+ case BANDWIDTH_7_MHZ:
+ case BANDWIDTH_8_MHZ:
+ priv->frequency = params->frequency;
+ priv->bandwidth = params->u.ofdm.bandwidth;
+ break;
+ default:
+ printk(KERN_ERR "MAX2165 bandwidth not set!\n");
+ return -EINVAL;
+ }
+ } else {
+ printk(KERN_ERR "MAX2165 modulation type not supported!\n");
+ return -EINVAL;
+ }
+
+ dprintk("%s() frequency=%d\n", __func__, priv->frequency);
+
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+ max2165_set_bandwidth(priv, priv->bandwidth);
+ ret = max2165_set_rf(priv, priv->frequency);
+ mdelay(50);
+ max2165_debug_status(priv);
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 0);
+
+ if (ret != 0)
+ return -EREMOTEIO;
+
+ return 0;
+}
+
+static int max2165_get_frequency(struct dvb_frontend *fe, u32 *freq)
+{
+ struct max2165_priv *priv = fe->tuner_priv;
+ dprintk("%s()\n", __func__);
+ *freq = priv->frequency;
+ return 0;
+}
+
+static int max2165_get_bandwidth(struct dvb_frontend *fe, u32 *bw)
+{
+ struct max2165_priv *priv = fe->tuner_priv;
+ dprintk("%s()\n", __func__);
+
+ *bw = priv->bandwidth;
+ return 0;
+}
+
+static int max2165_get_status(struct dvb_frontend *fe, u32 *status)
+{
+ struct max2165_priv *priv = fe->tuner_priv;
+ u16 lock_status = 0;
+
+ dprintk("%s()\n", __func__);
+
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+
+ max2165_debug_status(priv);
+ *status = lock_status;
+
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 0);
+
+ return 0;
+}
+
+static int max2165_sleep(struct dvb_frontend *fe)
+{
+ dprintk("%s()\n", __func__);
+ return 0;
+}
+
+static int max2165_init(struct dvb_frontend *fe)
+{
+ struct max2165_priv *priv = fe->tuner_priv;
+ dprintk("%s()\n", __func__);
+
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+
+ /* Setup initial values */
+ /* Fractional Mode on */
+ max2165_write_reg(priv, REG_NDIV_FRAC2, 0x18);
+ /* LNA on */
+ max2165_write_reg(priv, REG_LNA, 0x01);
+ max2165_write_reg(priv, REG_PLL_CFG, 0x7A);
+ max2165_write_reg(priv, REG_TEST, 0x08);
+ max2165_write_reg(priv, REG_SHUTDOWN, 0x40);
+ max2165_write_reg(priv, REG_VCO_CTRL, 0x84);
+ max2165_write_reg(priv, REG_BASEBAND_CTRL, 0xC3);
+ max2165_write_reg(priv, REG_DC_OFFSET_CTRL, 0x75);
+ max2165_write_reg(priv, REG_DC_OFFSET_DAC, 0x00);
+ max2165_write_reg(priv, REG_ROM_TABLE_ADDR, 0x00);
+
+ max2165_set_osc(priv, priv->config->osc_clk);
+
+ max2165_read_rom_table(priv);
+
+ max2165_set_bandwidth(priv, BANDWIDTH_8_MHZ);
+
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 0);
+
+ return 0;
+}
+
+static int max2165_release(struct dvb_frontend *fe)
+{
+ struct max2165_priv *priv = fe->tuner_priv;
+ dprintk("%s()\n", __func__);
+
+ kfree(priv);
+ fe->tuner_priv = NULL;
+
+ return 0;
+}
+
+static const struct dvb_tuner_ops max2165_tuner_ops = {
+ .info = {
+ .name = "Maxim MAX2165",
+ .frequency_min = 470000000,
+ .frequency_max = 780000000,
+ .frequency_step = 50000,
+ },
+
+ .release = max2165_release,
+ .init = max2165_init,
+ .sleep = max2165_sleep,
+
+ .set_params = max2165_set_params,
+ .set_analog_params = NULL,
+ .get_frequency = max2165_get_frequency,
+ .get_bandwidth = max2165_get_bandwidth,
+ .get_status = max2165_get_status
+};
+
+struct dvb_frontend *max2165_attach(struct dvb_frontend *fe,
+ struct i2c_adapter *i2c,
+ struct max2165_config *cfg)
+{
+ struct max2165_priv *priv = NULL;
+
+ dprintk("%s(%d-%04x)\n", __func__,
+ i2c ? i2c_adapter_id(i2c) : -1,
+ cfg ? cfg->i2c_address : -1);
+
+ priv = kzalloc(sizeof(struct max2165_priv), GFP_KERNEL);
+ if (priv == NULL)
+ return NULL;
+
+ memcpy(&fe->ops.tuner_ops, &max2165_tuner_ops,
+ sizeof(struct dvb_tuner_ops));
+
+ priv->config = cfg;
+ priv->i2c = i2c;
+ fe->tuner_priv = priv;
+
+ max2165_init(fe);
+ max2165_debug_status(priv);
+
+ return fe;
+}
+EXPORT_SYMBOL(max2165_attach);
+
+MODULE_AUTHOR("David T. L. Wong <davidtlwong@gmail.com>");
+MODULE_DESCRIPTION("Maxim MAX2165 silicon tuner driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/common/tuners/max2165.h b/drivers/media/common/tuners/max2165.h
new file mode 100644
index 0000000..c063c36
--- /dev/null
+++ b/drivers/media/common/tuners/max2165.h
@@ -0,0 +1,48 @@
+/*
+ * Driver for Maxim MAX2165 silicon tuner
+ *
+ * Copyright (c) 2009 David T. L. Wong <davidtlwong@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __MAX2165_H__
+#define __MAX2165_H__
+
+struct dvb_frontend;
+struct i2c_adapter;
+
+struct max2165_config {
+ u8 i2c_address;
+ u8 osc_clk; /* in MHz, selectable values: 4,16,18,20,22,24,26,28 */
+};
+
+#if defined(CONFIG_MEDIA_TUNER_MAX2165) || \
+ (defined(CONFIG_MEDIA_TUNER_MAX2165_MODULE) && defined(MODULE))
+extern struct dvb_frontend *max2165_attach(struct dvb_frontend *fe,
+ struct i2c_adapter *i2c,
+ struct max2165_config *cfg);
+#else
+static inline struct dvb_frontend *max2165_attach(struct dvb_frontend *fe,
+ struct i2c_adapter *i2c,
+ struct max2165_config *cfg)
+{
+ printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+ return NULL;
+}
+#endif
+
+#endif
diff --git a/drivers/media/common/tuners/max2165_priv.h b/drivers/media/common/tuners/max2165_priv.h
new file mode 100644
index 0000000..91bbe02
--- /dev/null
+++ b/drivers/media/common/tuners/max2165_priv.h
@@ -0,0 +1,60 @@
+/*
+ * Driver for Maxim MAX2165 silicon tuner
+ *
+ * Copyright (c) 2009 David T. L. Wong <davidtlwong@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __MAX2165_PRIV_H__
+#define __MAX2165_PRIV_H__
+
+#define REG_NDIV_INT 0x00
+#define REG_NDIV_FRAC2 0x01
+#define REG_NDIV_FRAC1 0x02
+#define REG_NDIV_FRAC0 0x03
+#define REG_TRACK_FILTER 0x04
+#define REG_LNA 0x05
+#define REG_PLL_CFG 0x06
+#define REG_TEST 0x07
+#define REG_SHUTDOWN 0x08
+#define REG_VCO_CTRL 0x09
+#define REG_BASEBAND_CTRL 0x0A
+#define REG_DC_OFFSET_CTRL 0x0B
+#define REG_DC_OFFSET_DAC 0x0C
+#define REG_ROM_TABLE_ADDR 0x0D
+
+/* Read Only Registers */
+#define REG_ROM_TABLE_DATA 0x10
+#define REG_STATUS 0x11
+#define REG_AUTOTUNE 0x12
+
+struct max2165_priv {
+ struct max2165_config *config;
+ struct i2c_adapter *i2c;
+
+ u32 frequency;
+ u32 bandwidth;
+
+ u8 tf_ntch_low_cfg;
+ u8 tf_ntch_hi_cfg;
+ u8 tf_balun_low_ref;
+ u8 tf_balun_hi_ref;
+ u8 bb_filter_7mhz_cfg;
+ u8 bb_filter_8mhz_cfg;
+};
+
+#endif
diff --git a/drivers/media/common/tuners/mxl5005s.c b/drivers/media/common/tuners/mxl5005s.c
index 0803dab..605e28b 100644
--- a/drivers/media/common/tuners/mxl5005s.c
+++ b/drivers/media/common/tuners/mxl5005s.c
@@ -2789,7 +2789,10 @@
/* add for 2.6.5 Special setting for QAM */
if (state->Mod_Type == MXL_QAM) {
- if (state->RF_IN < 680000000)
+ if (state->config->qam_gain != 0)
+ status += MXL_ControlWrite(fe, RFSYN_CHP_GAIN,
+ state->config->qam_gain);
+ else if (state->RF_IN < 680000000)
status += MXL_ControlWrite(fe, RFSYN_CHP_GAIN, 3);
else
status += MXL_ControlWrite(fe, RFSYN_CHP_GAIN, 2);
diff --git a/drivers/media/common/tuners/mxl5005s.h b/drivers/media/common/tuners/mxl5005s.h
index 7ac6815..fc8a1ff 100644
--- a/drivers/media/common/tuners/mxl5005s.h
+++ b/drivers/media/common/tuners/mxl5005s.h
@@ -108,6 +108,10 @@
#define MXL_LOW_IF 1
u8 if_mode;
+ /* Some boards need to override the built-in logic for determining
+ the gain when in QAM mode (the HVR-1600 is one such case) */
+ u8 qam_gain;
+
/* Stuff I don't know what to do with */
u8 AgcMasterByte;
};
diff --git a/drivers/media/common/tuners/mxl5007t.c b/drivers/media/common/tuners/mxl5007t.c
index 2d02698..7eb1bf7 100644
--- a/drivers/media/common/tuners/mxl5007t.c
+++ b/drivers/media/common/tuners/mxl5007t.c
@@ -196,7 +196,7 @@
i = j = 0;
while (reg_pair1[i].reg || reg_pair1[i].val) {
- while (reg_pair2[j].reg || reg_pair2[j].reg) {
+ while (reg_pair2[j].reg || reg_pair2[j].val) {
if (reg_pair1[i].reg != reg_pair2[j].reg) {
j++;
continue;
diff --git a/drivers/media/common/tuners/tda18271-common.c b/drivers/media/common/tuners/tda18271-common.c
index 155c93e..e1f6782 100644
--- a/drivers/media/common/tuners/tda18271-common.c
+++ b/drivers/media/common/tuners/tda18271-common.c
@@ -326,12 +326,24 @@
regs[R_EB22] = 0x48;
regs[R_EB23] = 0xb0;
- if (priv->small_i2c) {
+ switch (priv->small_i2c) {
+ case TDA18271_08_BYTE_CHUNK_INIT:
+ tda18271_write_regs(fe, 0x00, 0x08);
+ tda18271_write_regs(fe, 0x08, 0x08);
+ tda18271_write_regs(fe, 0x10, 0x08);
+ tda18271_write_regs(fe, 0x18, 0x08);
+ tda18271_write_regs(fe, 0x20, 0x07);
+ break;
+ case TDA18271_16_BYTE_CHUNK_INIT:
tda18271_write_regs(fe, 0x00, 0x10);
tda18271_write_regs(fe, 0x10, 0x10);
tda18271_write_regs(fe, 0x20, 0x07);
- } else
+ break;
+ case TDA18271_39_BYTE_CHUNK_INIT:
+ default:
tda18271_write_regs(fe, 0x00, TDA18271_NUM_REGS);
+ break;
+ }
/* setup agc1 gain */
regs[R_EB17] = 0x00;
diff --git a/drivers/media/common/tuners/tda18271-fe.c b/drivers/media/common/tuners/tda18271-fe.c
index 3a50ce9..b2e1545 100644
--- a/drivers/media/common/tuners/tda18271-fe.c
+++ b/drivers/media/common/tuners/tda18271-fe.c
@@ -256,8 +256,9 @@
struct tda18271_priv *priv = fe->tuner_priv;
struct tda18271_rf_tracking_filter_cal *map = priv->rf_cal_state;
unsigned char *regs = priv->tda18271_regs;
- int tm_current, rfcal_comp, approx, i, ret;
- u8 dc_over_dt, rf_tab;
+ int i, ret;
+ u8 tm_current, dc_over_dt, rf_tab;
+ s32 rfcal_comp, approx;
/* power up */
ret = tda18271_set_standby_mode(fe, 0, 0, 0);
@@ -277,11 +278,11 @@
return i;
if ((0 == map[i].rf3) || (freq / 1000 < map[i].rf2)) {
- approx = map[i].rf_a1 *
- (freq / 1000 - map[i].rf1) + map[i].rf_b1 + rf_tab;
+ approx = map[i].rf_a1 * (s32)(freq / 1000 - map[i].rf1) +
+ map[i].rf_b1 + rf_tab;
} else {
- approx = map[i].rf_a2 *
- (freq / 1000 - map[i].rf2) + map[i].rf_b2 + rf_tab;
+ approx = map[i].rf_a2 * (s32)(freq / 1000 - map[i].rf2) +
+ map[i].rf_b2 + rf_tab;
}
if (approx < 0)
@@ -292,9 +293,9 @@
tda18271_lookup_map(fe, RF_CAL_DC_OVER_DT, &freq, &dc_over_dt);
/* calculate temperature compensation */
- rfcal_comp = dc_over_dt * (tm_current - priv->tm_rfcal) / 1000;
+ rfcal_comp = dc_over_dt * (s32)(tm_current - priv->tm_rfcal) / 1000;
- regs[R_EB14] = approx + rfcal_comp;
+ regs[R_EB14] = (unsigned char)(approx + rfcal_comp);
ret = tda18271_write_regs(fe, R_EB14, 1);
fail:
return ret;
@@ -572,6 +573,7 @@
struct tda18271_rf_tracking_filter_cal *map = priv->rf_cal_state;
unsigned char *regs = priv->tda18271_regs;
int bcal, rf, i;
+ s32 divisor, dividend;
#define RF1 0
#define RF2 1
#define RF3 2
@@ -610,20 +612,22 @@
switch (rf) {
case RF1:
map[i].rf_a1 = 0;
- map[i].rf_b1 = prog_cal[RF1] - prog_tab[RF1];
+ map[i].rf_b1 = (s32)(prog_cal[RF1] - prog_tab[RF1]);
map[i].rf1 = rf_freq[RF1] / 1000;
break;
case RF2:
- map[i].rf_a1 = (prog_cal[RF2] - prog_tab[RF2] -
- prog_cal[RF1] + prog_tab[RF1]) /
- (s32)((rf_freq[RF2] - rf_freq[RF1]) / 1000);
+ dividend = (s32)(prog_cal[RF2] - prog_tab[RF2]) -
+ (s32)(prog_cal[RF1] + prog_tab[RF1]);
+ divisor = (s32)(rf_freq[RF2] - rf_freq[RF1]) / 1000;
+ map[i].rf_a1 = (dividend / divisor);
map[i].rf2 = rf_freq[RF2] / 1000;
break;
case RF3:
- map[i].rf_a2 = (prog_cal[RF3] - prog_tab[RF3] -
- prog_cal[RF2] + prog_tab[RF2]) /
- (s32)((rf_freq[RF3] - rf_freq[RF2]) / 1000);
- map[i].rf_b2 = prog_cal[RF2] - prog_tab[RF2];
+ dividend = (s32)(prog_cal[RF3] - prog_tab[RF3]) -
+ (s32)(prog_cal[RF2] + prog_tab[RF2]);
+ divisor = (s32)(rf_freq[RF3] - rf_freq[RF2]) / 1000;
+ map[i].rf_a2 = (dividend / divisor);
+ map[i].rf_b2 = (s32)(prog_cal[RF2] - prog_tab[RF2]);
map[i].rf3 = rf_freq[RF3] / 1000;
break;
default:
@@ -1181,6 +1185,48 @@
return ret;
}
+static int tda18271_setup_configuration(struct dvb_frontend *fe,
+ struct tda18271_config *cfg)
+{
+ struct tda18271_priv *priv = fe->tuner_priv;
+
+ priv->gate = (cfg) ? cfg->gate : TDA18271_GATE_AUTO;
+ priv->role = (cfg) ? cfg->role : TDA18271_MASTER;
+ priv->config = (cfg) ? cfg->config : 0;
+ priv->small_i2c = (cfg) ?
+ cfg->small_i2c : TDA18271_39_BYTE_CHUNK_INIT;
+ priv->output_opt = (cfg) ?
+ cfg->output_opt : TDA18271_OUTPUT_LT_XT_ON;
+
+ return 0;
+}
+
+static inline int tda18271_need_cal_on_startup(struct tda18271_config *cfg)
+{
+ /* tda18271_cal_on_startup == -1 when cal module option is unset */
+ return ((tda18271_cal_on_startup == -1) ?
+ /* honor configuration setting */
+ ((cfg) && (cfg->rf_cal_on_startup)) :
+ /* module option overrides configuration setting */
+ (tda18271_cal_on_startup)) ? 1 : 0;
+}
+
+static int tda18271_set_config(struct dvb_frontend *fe, void *priv_cfg)
+{
+ struct tda18271_config *cfg = (struct tda18271_config *) priv_cfg;
+
+ tda18271_setup_configuration(fe, cfg);
+
+ if (tda18271_need_cal_on_startup(cfg))
+ tda18271_init(fe);
+
+ /* override default std map with values in config struct */
+ if ((cfg) && (cfg->std_map))
+ tda18271_update_std_map(fe, cfg->std_map);
+
+ return 0;
+}
+
static struct dvb_tuner_ops tda18271_tuner_ops = {
.info = {
.name = "NXP TDA18271HD",
@@ -1193,6 +1239,7 @@
.set_params = tda18271_set_params,
.set_analog_params = tda18271_set_analog_params,
.release = tda18271_release,
+ .set_config = tda18271_set_config,
.get_frequency = tda18271_get_frequency,
.get_bandwidth = tda18271_get_bandwidth,
};
@@ -1213,33 +1260,14 @@
case 0:
goto fail;
case 1:
- {
/* new tuner instance */
- int rf_cal_on_startup;
+ fe->tuner_priv = priv;
- priv->gate = (cfg) ? cfg->gate : TDA18271_GATE_AUTO;
- priv->role = (cfg) ? cfg->role : TDA18271_MASTER;
- priv->config = (cfg) ? cfg->config : 0;
- priv->small_i2c = (cfg) ? cfg->small_i2c : 0;
- priv->output_opt = (cfg) ?
- cfg->output_opt : TDA18271_OUTPUT_LT_XT_ON;
-
- /* tda18271_cal_on_startup == -1 when cal
- * module option is unset */
- if (tda18271_cal_on_startup == -1) {
- /* honor attach-time configuration */
- rf_cal_on_startup =
- ((cfg) && (cfg->rf_cal_on_startup)) ? 1 : 0;
- } else {
- /* module option overrides attach configuration */
- rf_cal_on_startup = tda18271_cal_on_startup;
- }
+ tda18271_setup_configuration(fe, cfg);
priv->cal_initialized = false;
mutex_init(&priv->lock);
- fe->tuner_priv = priv;
-
if (tda_fail(tda18271_get_id(fe)))
goto fail;
@@ -1249,12 +1277,12 @@
mutex_lock(&priv->lock);
tda18271_init_regs(fe);
- if ((rf_cal_on_startup) && (priv->id == TDA18271HDC2))
+ if ((tda18271_need_cal_on_startup(cfg)) &&
+ (priv->id == TDA18271HDC2))
tda18271c2_rf_cal_init(fe);
mutex_unlock(&priv->lock);
break;
- }
default:
/* existing tuner instance */
fe->tuner_priv = priv;
@@ -1271,7 +1299,11 @@
priv->small_i2c = cfg->small_i2c;
if (cfg->output_opt)
priv->output_opt = cfg->output_opt;
+ if (cfg->std_map)
+ tda18271_update_std_map(fe, cfg->std_map);
}
+ if (tda18271_need_cal_on_startup(cfg))
+ tda18271_init(fe);
break;
}
@@ -1298,7 +1330,7 @@
MODULE_DESCRIPTION("NXP TDA18271HD analog / digital tuner driver");
MODULE_AUTHOR("Michael Krufky <mkrufky@linuxtv.org>");
MODULE_LICENSE("GPL");
-MODULE_VERSION("0.3");
+MODULE_VERSION("0.4");
/*
* Overrides for Emacs so that we follow Linus's tabbing style.
diff --git a/drivers/media/common/tuners/tda18271-maps.c b/drivers/media/common/tuners/tda18271-maps.c
index e21fdef..e7f84c7 100644
--- a/drivers/media/common/tuners/tda18271-maps.c
+++ b/drivers/media/common/tuners/tda18271-maps.c
@@ -978,6 +978,7 @@
int tda18271_lookup_cid_target(struct dvb_frontend *fe,
u32 *freq, u8 *cid_target, u16 *count_limit)
{
+ struct tda18271_priv *priv = fe->tuner_priv;
int i = 0;
while ((tda18271_cid_target[i].rfmax * 1000) < *freq) {
diff --git a/drivers/media/common/tuners/tda18271-priv.h b/drivers/media/common/tuners/tda18271-priv.h
index 2bee229..9589ab0 100644
--- a/drivers/media/common/tuners/tda18271-priv.h
+++ b/drivers/media/common/tuners/tda18271-priv.h
@@ -80,10 +80,10 @@
u32 rf1;
u32 rf2;
u32 rf3;
- int rf_a1;
- int rf_b1;
- int rf_a2;
- int rf_b2;
+ s32 rf_a1;
+ s32 rf_b1;
+ s32 rf_a2;
+ s32 rf_b2;
};
enum tda18271_pll {
@@ -109,11 +109,12 @@
enum tda18271_i2c_gate gate;
enum tda18271_ver id;
enum tda18271_output_options output_opt;
+ enum tda18271_small_i2c small_i2c;
unsigned int config; /* interface to saa713x / tda829x */
- unsigned int tm_rfcal;
unsigned int cal_initialized:1;
- unsigned int small_i2c:1;
+
+ u8 tm_rfcal;
struct tda18271_map_layout *maps;
struct tda18271_std_map std;
@@ -135,27 +136,37 @@
#define DBG_ADV 8
#define DBG_CAL 16
-#define tda_printk(kern, fmt, arg...) \
- printk(kern "%s: " fmt, __func__, ##arg)
+#define tda_printk(st, kern, fmt, arg...) do {\
+ if (st) { \
+ struct tda18271_priv *state = st; \
+ printk(kern "%s: [%d-%04x|%s] " fmt, __func__, \
+ i2c_adapter_id(state->i2c_props.adap), \
+ state->i2c_props.addr, \
+ (state->role == TDA18271_MASTER) \
+ ? "M" : "S", ##arg); \
+ } else \
+ printk(kern "%s: " fmt, __func__, ##arg); \
+} while (0)
-#define tda_dprintk(lvl, fmt, arg...) do {\
+#define tda_dprintk(st, lvl, fmt, arg...) do {\
if (tda18271_debug & lvl) \
- tda_printk(KERN_DEBUG, fmt, ##arg); } while (0)
+ tda_printk(st, KERN_DEBUG, fmt, ##arg); } while (0)
#define tda_info(fmt, arg...) printk(KERN_INFO fmt, ##arg)
-#define tda_warn(fmt, arg...) tda_printk(KERN_WARNING, fmt, ##arg)
-#define tda_err(fmt, arg...) tda_printk(KERN_ERR, fmt, ##arg)
-#define tda_dbg(fmt, arg...) tda_dprintk(DBG_INFO, fmt, ##arg)
-#define tda_map(fmt, arg...) tda_dprintk(DBG_MAP, fmt, ##arg)
-#define tda_reg(fmt, arg...) tda_dprintk(DBG_REG, fmt, ##arg)
-#define tda_cal(fmt, arg...) tda_dprintk(DBG_CAL, fmt, ##arg)
+#define tda_warn(fmt, arg...) tda_printk(priv, KERN_WARNING, fmt, ##arg)
+#define tda_err(fmt, arg...) tda_printk(priv, KERN_ERR, fmt, ##arg)
+#define tda_dbg(fmt, arg...) tda_dprintk(priv, DBG_INFO, fmt, ##arg)
+#define tda_map(fmt, arg...) tda_dprintk(priv, DBG_MAP, fmt, ##arg)
+#define tda_reg(fmt, arg...) tda_dprintk(priv, DBG_REG, fmt, ##arg)
+#define tda_cal(fmt, arg...) tda_dprintk(priv, DBG_CAL, fmt, ##arg)
#define tda_fail(ret) \
({ \
int __ret; \
__ret = (ret < 0); \
if (__ret) \
- tda_printk(KERN_ERR, "error %d on line %d\n", ret, __LINE__);\
+ tda_printk(priv, KERN_ERR, \
+ "error %d on line %d\n", ret, __LINE__); \
__ret; \
})
diff --git a/drivers/media/common/tuners/tda18271.h b/drivers/media/common/tuners/tda18271.h
index 323f291..d7fcc36 100644
--- a/drivers/media/common/tuners/tda18271.h
+++ b/drivers/media/common/tuners/tda18271.h
@@ -78,6 +78,12 @@
TDA18271_OUTPUT_XT_OFF = 2,
};
+enum tda18271_small_i2c {
+ TDA18271_39_BYTE_CHUNK_INIT = 0,
+ TDA18271_16_BYTE_CHUNK_INIT = 1,
+ TDA18271_08_BYTE_CHUNK_INIT = 2,
+};
+
struct tda18271_config {
/* override default if freq / std settings (optional) */
struct tda18271_std_map *std_map;
@@ -91,12 +97,12 @@
/* output options that can be disabled */
enum tda18271_output_options output_opt;
+ /* some i2c providers cant write all 39 registers at once */
+ enum tda18271_small_i2c small_i2c;
+
/* force rf tracking filter calibration on startup */
unsigned int rf_cal_on_startup:1;
- /* some i2c providers cant write all 39 registers at once */
- unsigned int small_i2c:1;
-
/* interface to saa713x / tda829x */
unsigned int config;
};
diff --git a/drivers/media/common/tuners/tda8290.c b/drivers/media/common/tuners/tda8290.c
index 064d14c..c190b0d 100644
--- a/drivers/media/common/tuners/tda8290.c
+++ b/drivers/media/common/tuners/tda8290.c
@@ -33,6 +33,7 @@
MODULE_PARM_DESC(debug, "enable verbose debug messages");
static int deemphasis_50;
+module_param(deemphasis_50, int, 0644);
MODULE_PARM_DESC(deemphasis_50, "0 - 75us deemphasis; 1 - 50us deemphasis");
/* ---------------------------------------------------------------------- */
diff --git a/drivers/media/common/tuners/tda9887.c b/drivers/media/common/tuners/tda9887.c
index 544cdbe..a71c100 100644
--- a/drivers/media/common/tuners/tda9887.c
+++ b/drivers/media/common/tuners/tda9887.c
@@ -463,7 +463,7 @@
buf[1] &= ~cQSS;
}
- if (adjust >= 0x00 && adjust < 0x20) {
+ if (adjust < 0x20) {
buf[2] &= ~cTopMask;
buf[2] |= adjust;
}
diff --git a/drivers/media/common/tuners/xc5000.c b/drivers/media/common/tuners/xc5000.c
index f4ffcdc..432003d 100644
--- a/drivers/media/common/tuners/xc5000.c
+++ b/drivers/media/common/tuners/xc5000.c
@@ -61,6 +61,7 @@
u32 bandwidth;
u8 video_standard;
u8 rf_mode;
+ u8 radio_input;
};
/* Misc Defines */
@@ -632,8 +633,12 @@
struct xc5000_priv *priv = fe->tuner_priv;
int ret;
- if (xc5000_is_firmware_loaded(fe) != XC_RESULT_SUCCESS)
- xc_load_fw_and_init_tuner(fe);
+ if (xc5000_is_firmware_loaded(fe) != XC_RESULT_SUCCESS) {
+ if (xc_load_fw_and_init_tuner(fe) != XC_RESULT_SUCCESS) {
+ dprintk(1, "Unable to load firmware and init tuner\n");
+ return -EINVAL;
+ }
+ }
dprintk(1, "%s() frequency=%d (Hz)\n", __func__, params->frequency);
@@ -739,15 +744,12 @@
return ret;
}
-static int xc5000_set_analog_params(struct dvb_frontend *fe,
+static int xc5000_set_tv_freq(struct dvb_frontend *fe,
struct analog_parameters *params)
{
struct xc5000_priv *priv = fe->tuner_priv;
int ret;
- if (xc5000_is_firmware_loaded(fe) != XC_RESULT_SUCCESS)
- xc_load_fw_and_init_tuner(fe);
-
dprintk(1, "%s() frequency=%d (in units of 62.5khz)\n",
__func__, params->frequency);
@@ -827,6 +829,86 @@
return 0;
}
+static int xc5000_set_radio_freq(struct dvb_frontend *fe,
+ struct analog_parameters *params)
+{
+ struct xc5000_priv *priv = fe->tuner_priv;
+ int ret = -EINVAL;
+ u8 radio_input;
+
+ dprintk(1, "%s() frequency=%d (in units of khz)\n",
+ __func__, params->frequency);
+
+ if (priv->radio_input == XC5000_RADIO_NOT_CONFIGURED) {
+ dprintk(1, "%s() radio input not configured\n", __func__);
+ return -EINVAL;
+ }
+
+ if (priv->radio_input == XC5000_RADIO_FM1)
+ radio_input = FM_Radio_INPUT1;
+ else if (priv->radio_input == XC5000_RADIO_FM2)
+ radio_input = FM_Radio_INPUT2;
+ else {
+ dprintk(1, "%s() unknown radio input %d\n", __func__,
+ priv->radio_input);
+ return -EINVAL;
+ }
+
+ priv->freq_hz = params->frequency * 125 / 2;
+
+ priv->rf_mode = XC_RF_MODE_AIR;
+
+ ret = xc_SetTVStandard(priv, XC5000_Standard[radio_input].VideoMode,
+ XC5000_Standard[radio_input].AudioMode);
+
+ if (ret != XC_RESULT_SUCCESS) {
+ printk(KERN_ERR "xc5000: xc_SetTVStandard failed\n");
+ return -EREMOTEIO;
+ }
+
+ ret = xc_SetSignalSource(priv, priv->rf_mode);
+ if (ret != XC_RESULT_SUCCESS) {
+ printk(KERN_ERR
+ "xc5000: xc_SetSignalSource(%d) failed\n",
+ priv->rf_mode);
+ return -EREMOTEIO;
+ }
+
+ xc_tune_channel(priv, priv->freq_hz, XC_TUNE_ANALOG);
+
+ return 0;
+}
+
+static int xc5000_set_analog_params(struct dvb_frontend *fe,
+ struct analog_parameters *params)
+{
+ struct xc5000_priv *priv = fe->tuner_priv;
+ int ret = -EINVAL;
+
+ if (priv->i2c_props.adap == NULL)
+ return -EINVAL;
+
+ if (xc5000_is_firmware_loaded(fe) != XC_RESULT_SUCCESS) {
+ if (xc_load_fw_and_init_tuner(fe) != XC_RESULT_SUCCESS) {
+ dprintk(1, "Unable to load firmware and init tuner\n");
+ return -EINVAL;
+ }
+ }
+
+ switch (params->mode) {
+ case V4L2_TUNER_RADIO:
+ ret = xc5000_set_radio_freq(fe, params);
+ break;
+ case V4L2_TUNER_ANALOG_TV:
+ case V4L2_TUNER_DIGITAL_TV:
+ ret = xc5000_set_tv_freq(fe, params);
+ break;
+ }
+
+ return ret;
+}
+
+
static int xc5000_get_frequency(struct dvb_frontend *fe, u32 *freq)
{
struct xc5000_priv *priv = fe->tuner_priv;
@@ -1000,6 +1082,9 @@
priv->if_khz = cfg->if_khz;
}
+ if (priv->radio_input == 0)
+ priv->radio_input = cfg->radio_input;
+
/* Check if firmware has been loaded. It is possible that another
instance of the driver has loaded the firmware.
*/
diff --git a/drivers/media/common/tuners/xc5000.h b/drivers/media/common/tuners/xc5000.h
index f4c1466..e6d7236 100644
--- a/drivers/media/common/tuners/xc5000.h
+++ b/drivers/media/common/tuners/xc5000.h
@@ -30,11 +30,17 @@
struct xc5000_config {
u8 i2c_address;
u32 if_khz;
+ u8 radio_input;
};
/* xc5000 callback command */
#define XC5000_TUNER_RESET 0
+/* Possible Radio inputs */
+#define XC5000_RADIO_NOT_CONFIGURED 0
+#define XC5000_RADIO_FM1 1
+#define XC5000_RADIO_FM2 2
+
/* For each bridge framework, when it attaches either analog or digital,
* it has to store a reference back to its _core equivalent structure,
* so that it can service the hardware by steering gpio's etc.
diff --git a/drivers/media/dvb/bt8xx/dvb-bt8xx.c b/drivers/media/dvb/bt8xx/dvb-bt8xx.c
index b1857c1..78fc469 100644
--- a/drivers/media/dvb/bt8xx/dvb-bt8xx.c
+++ b/drivers/media/dvb/bt8xx/dvb-bt8xx.c
@@ -215,7 +215,7 @@
freq = 2150000; /* satellite IF is 950..2150MHz */
/* decide which VCO to use for the input frequency */
- for(i = 1; (i < ARRAY_SIZE(osci)) && (osci[i] < freq); i++);
+ for(i = 1; (i < ARRAY_SIZE(osci) - 1) && (osci[i] < freq); i++);
printk("cx24108 debug: select vco #%d (f=%d)\n",i,freq);
band=bandsel[i];
/* the gain values must be set by SetSymbolrate */
diff --git a/drivers/media/dvb/dm1105/dm1105.c b/drivers/media/dvb/dm1105/dm1105.c
index 2d099e2..53e3f2a 100644
--- a/drivers/media/dvb/dm1105/dm1105.c
+++ b/drivers/media/dvb/dm1105/dm1105.c
@@ -510,7 +510,7 @@
data = (ircom >> 8) & 0x7f;
- ir_input_keydown(ir->input_dev, &ir->ir, data, data);
+ ir_input_keydown(ir->input_dev, &ir->ir, data);
ir_input_nokey(ir->input_dev, &ir->ir);
}
@@ -589,7 +589,12 @@
snprintf(dm1105->ir.input_phys, sizeof(dm1105->ir.input_phys),
"pci-%s/ir0", pci_name(dm1105->pdev));
- ir_input_init(input_dev, &dm1105->ir.ir, ir_type, ir_codes);
+ err = ir_input_init(input_dev, &dm1105->ir.ir, ir_type, ir_codes);
+ if (err < 0) {
+ input_free_device(input_dev);
+ return err;
+ }
+
input_dev->name = "DVB on-card IR receiver";
input_dev->phys = dm1105->ir.input_phys;
input_dev->id.bustype = BUS_PCI;
@@ -608,6 +613,7 @@
err = input_register_device(input_dev);
if (err) {
+ ir_input_free(input_dev);
input_free_device(input_dev);
return err;
}
@@ -617,8 +623,8 @@
void __devexit dm1105_ir_exit(struct dm1105dvb *dm1105)
{
+ ir_input_free(dm1105->ir.input_dev);
input_unregister_device(dm1105->ir.input_dev);
-
}
static int __devinit dm1105dvb_hw_init(struct dm1105dvb *dm1105dvb)
diff --git a/drivers/media/dvb/dvb-core/dvb_demux.c b/drivers/media/dvb/dvb-core/dvb_demux.c
index 91c537b..b78cfb7 100644
--- a/drivers/media/dvb/dvb-core/dvb_demux.c
+++ b/drivers/media/dvb/dvb-core/dvb_demux.c
@@ -30,6 +30,7 @@
#include <linux/string.h>
#include <linux/crc32.h>
#include <asm/uaccess.h>
+#include <asm/div64.h>
#include "dvb_demux.h"
@@ -44,6 +45,11 @@
MODULE_PARM_DESC(dvb_demux_tscheck,
"enable transport stream continuity and TEI check");
+static int dvb_demux_speedcheck;
+module_param(dvb_demux_speedcheck, int, 0644);
+MODULE_PARM_DESC(dvb_demux_speedcheck,
+ "enable transport stream speed check");
+
#define dprintk_tscheck(x...) do { \
if (dvb_demux_tscheck && printk_ratelimit()) \
printk(x); \
@@ -387,6 +393,39 @@
u16 pid = ts_pid(buf);
int dvr_done = 0;
+ if (dvb_demux_speedcheck) {
+ struct timespec cur_time, delta_time;
+ u64 speed_bytes, speed_timedelta;
+
+ demux->speed_pkts_cnt++;
+
+ /* show speed every SPEED_PKTS_INTERVAL packets */
+ if (!(demux->speed_pkts_cnt % SPEED_PKTS_INTERVAL)) {
+ cur_time = current_kernel_time();
+
+ if (demux->speed_last_time.tv_sec != 0 &&
+ demux->speed_last_time.tv_nsec != 0) {
+ delta_time = timespec_sub(cur_time,
+ demux->speed_last_time);
+ speed_bytes = (u64)demux->speed_pkts_cnt
+ * 188 * 8;
+ /* convert to 1024 basis */
+ speed_bytes = 1000 * div64_u64(speed_bytes,
+ 1024);
+ speed_timedelta =
+ (u64)timespec_to_ns(&delta_time);
+ speed_timedelta = div64_u64(speed_timedelta,
+ 1000000); /* nsec -> usec */
+ printk(KERN_INFO "TS speed %llu Kbits/sec \n",
+ div64_u64(speed_bytes,
+ speed_timedelta));
+ };
+
+ demux->speed_last_time = cur_time;
+ demux->speed_pkts_cnt = 0;
+ };
+ };
+
if (dvb_demux_tscheck) {
if (!demux->cnt_storage)
demux->cnt_storage = vmalloc(MAX_PID + 1);
diff --git a/drivers/media/dvb/dvb-core/dvb_demux.h b/drivers/media/dvb/dvb-core/dvb_demux.h
index 2fe05d0..a7d876f 100644
--- a/drivers/media/dvb/dvb-core/dvb_demux.h
+++ b/drivers/media/dvb/dvb-core/dvb_demux.h
@@ -44,6 +44,8 @@
#define MAX_PID 0x1fff
+#define SPEED_PKTS_INTERVAL 50000
+
struct dvb_demux_filter {
struct dmx_section_filter filter;
u8 maskandmode[DMX_MAX_FILTER_SIZE];
@@ -131,6 +133,9 @@
spinlock_t lock;
uint8_t *cnt_storage; /* for TS continuity check */
+
+ struct timespec speed_last_time; /* for TS speed check */
+ uint32_t speed_pkts_cnt; /* for TS speed check */
};
int dvb_dmx_init(struct dvb_demux *dvbdemux);
diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c
index 9808241..0746122 100644
--- a/drivers/media/dvb/dvb-core/dvb_frontend.c
+++ b/drivers/media/dvb/dvb-core/dvb_frontend.c
@@ -895,104 +895,27 @@
}
static struct dtv_cmds_h dtv_cmds[] = {
- [DTV_TUNE] = {
- .name = "DTV_TUNE",
- .cmd = DTV_TUNE,
- .set = 1,
- },
- [DTV_CLEAR] = {
- .name = "DTV_CLEAR",
- .cmd = DTV_CLEAR,
- .set = 1,
- },
+ _DTV_CMD(DTV_TUNE, 1, 0),
+ _DTV_CMD(DTV_CLEAR, 1, 0),
/* Set */
- [DTV_FREQUENCY] = {
- .name = "DTV_FREQUENCY",
- .cmd = DTV_FREQUENCY,
- .set = 1,
- },
- [DTV_BANDWIDTH_HZ] = {
- .name = "DTV_BANDWIDTH_HZ",
- .cmd = DTV_BANDWIDTH_HZ,
- .set = 1,
- },
- [DTV_MODULATION] = {
- .name = "DTV_MODULATION",
- .cmd = DTV_MODULATION,
- .set = 1,
- },
- [DTV_INVERSION] = {
- .name = "DTV_INVERSION",
- .cmd = DTV_INVERSION,
- .set = 1,
- },
- [DTV_DISEQC_MASTER] = {
- .name = "DTV_DISEQC_MASTER",
- .cmd = DTV_DISEQC_MASTER,
- .set = 1,
- .buffer = 1,
- },
- [DTV_SYMBOL_RATE] = {
- .name = "DTV_SYMBOL_RATE",
- .cmd = DTV_SYMBOL_RATE,
- .set = 1,
- },
- [DTV_INNER_FEC] = {
- .name = "DTV_INNER_FEC",
- .cmd = DTV_INNER_FEC,
- .set = 1,
- },
- [DTV_VOLTAGE] = {
- .name = "DTV_VOLTAGE",
- .cmd = DTV_VOLTAGE,
- .set = 1,
- },
- [DTV_TONE] = {
- .name = "DTV_TONE",
- .cmd = DTV_TONE,
- .set = 1,
- },
- [DTV_PILOT] = {
- .name = "DTV_PILOT",
- .cmd = DTV_PILOT,
- .set = 1,
- },
- [DTV_ROLLOFF] = {
- .name = "DTV_ROLLOFF",
- .cmd = DTV_ROLLOFF,
- .set = 1,
- },
- [DTV_DELIVERY_SYSTEM] = {
- .name = "DTV_DELIVERY_SYSTEM",
- .cmd = DTV_DELIVERY_SYSTEM,
- .set = 1,
- },
- [DTV_HIERARCHY] = {
- .name = "DTV_HIERARCHY",
- .cmd = DTV_HIERARCHY,
- .set = 1,
- },
- [DTV_CODE_RATE_HP] = {
- .name = "DTV_CODE_RATE_HP",
- .cmd = DTV_CODE_RATE_HP,
- .set = 1,
- },
- [DTV_CODE_RATE_LP] = {
- .name = "DTV_CODE_RATE_LP",
- .cmd = DTV_CODE_RATE_LP,
- .set = 1,
- },
- [DTV_GUARD_INTERVAL] = {
- .name = "DTV_GUARD_INTERVAL",
- .cmd = DTV_GUARD_INTERVAL,
- .set = 1,
- },
- [DTV_TRANSMISSION_MODE] = {
- .name = "DTV_TRANSMISSION_MODE",
- .cmd = DTV_TRANSMISSION_MODE,
- .set = 1,
- },
+ _DTV_CMD(DTV_FREQUENCY, 1, 0),
+ _DTV_CMD(DTV_BANDWIDTH_HZ, 1, 0),
+ _DTV_CMD(DTV_MODULATION, 1, 0),
+ _DTV_CMD(DTV_INVERSION, 1, 0),
+ _DTV_CMD(DTV_DISEQC_MASTER, 1, 1),
+ _DTV_CMD(DTV_SYMBOL_RATE, 1, 0),
+ _DTV_CMD(DTV_INNER_FEC, 1, 0),
+ _DTV_CMD(DTV_VOLTAGE, 1, 0),
+ _DTV_CMD(DTV_TONE, 1, 0),
+ _DTV_CMD(DTV_PILOT, 1, 0),
+ _DTV_CMD(DTV_ROLLOFF, 1, 0),
+ _DTV_CMD(DTV_DELIVERY_SYSTEM, 1, 0),
+ _DTV_CMD(DTV_HIERARCHY, 1, 0),
+ _DTV_CMD(DTV_CODE_RATE_HP, 1, 0),
+ _DTV_CMD(DTV_CODE_RATE_LP, 1, 0),
+ _DTV_CMD(DTV_GUARD_INTERVAL, 1, 0),
+ _DTV_CMD(DTV_TRANSMISSION_MODE, 1, 0),
_DTV_CMD(DTV_ISDBT_PARTIAL_RECEPTION, 1, 0),
_DTV_CMD(DTV_ISDBT_SOUND_BROADCASTING, 1, 0),
@@ -1035,43 +958,13 @@
_DTV_CMD(DTV_ISDBS_TS_ID, 1, 0),
/* Get */
- [DTV_DISEQC_SLAVE_REPLY] = {
- .name = "DTV_DISEQC_SLAVE_REPLY",
- .cmd = DTV_DISEQC_SLAVE_REPLY,
- .set = 0,
- .buffer = 1,
- },
-
- [DTV_API_VERSION] = {
- .name = "DTV_API_VERSION",
- .cmd = DTV_API_VERSION,
- .set = 0,
- },
- [DTV_CODE_RATE_HP] = {
- .name = "DTV_CODE_RATE_HP",
- .cmd = DTV_CODE_RATE_HP,
- .set = 0,
- },
- [DTV_CODE_RATE_LP] = {
- .name = "DTV_CODE_RATE_LP",
- .cmd = DTV_CODE_RATE_LP,
- .set = 0,
- },
- [DTV_GUARD_INTERVAL] = {
- .name = "DTV_GUARD_INTERVAL",
- .cmd = DTV_GUARD_INTERVAL,
- .set = 0,
- },
- [DTV_TRANSMISSION_MODE] = {
- .name = "DTV_TRANSMISSION_MODE",
- .cmd = DTV_TRANSMISSION_MODE,
- .set = 0,
- },
- [DTV_HIERARCHY] = {
- .name = "DTV_HIERARCHY",
- .cmd = DTV_HIERARCHY,
- .set = 0,
- },
+ _DTV_CMD(DTV_DISEQC_SLAVE_REPLY, 0, 1),
+ _DTV_CMD(DTV_API_VERSION, 0, 0),
+ _DTV_CMD(DTV_CODE_RATE_HP, 0, 0),
+ _DTV_CMD(DTV_CODE_RATE_LP, 0, 0),
+ _DTV_CMD(DTV_GUARD_INTERVAL, 0, 0),
+ _DTV_CMD(DTV_TRANSMISSION_MODE, 0, 0),
+ _DTV_CMD(DTV_HIERARCHY, 0, 0),
};
static void dtv_property_dump(struct dtv_property *tvp)
@@ -1712,7 +1605,18 @@
struct dvb_device *dvbdev = file->private_data;
struct dvb_frontend *fe = dvbdev->priv;
struct dvb_frontend_private *fepriv = fe->frontend_priv;
- int err = -EOPNOTSUPP;
+ int cb_err, err = -EOPNOTSUPP;
+
+ if (fe->dvb->fe_ioctl_override) {
+ cb_err = fe->dvb->fe_ioctl_override(fe, cmd, parg,
+ DVB_FE_IOCTL_PRE);
+ if (cb_err < 0)
+ return cb_err;
+ if (cb_err > 0)
+ return 0;
+ /* fe_ioctl_override returning 0 allows
+ * dvb-core to continue handling the ioctl */
+ }
switch (cmd) {
case FE_GET_INFO: {
@@ -1978,6 +1882,13 @@
break;
};
+ if (fe->dvb->fe_ioctl_override) {
+ cb_err = fe->dvb->fe_ioctl_override(fe, cmd, parg,
+ DVB_FE_IOCTL_POST);
+ if (cb_err < 0)
+ return cb_err;
+ }
+
return err;
}
diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.h b/drivers/media/dvb/dvb-core/dvb_frontend.h
index 810f07d..52e4ce4 100644
--- a/drivers/media/dvb/dvb-core/dvb_frontend.h
+++ b/drivers/media/dvb/dvb-core/dvb_frontend.h
@@ -160,7 +160,7 @@
* search callback possible return status
*
* DVBFE_ALGO_SEARCH_SUCCESS
- * The frontend search algorithm completed and returned succesfully
+ * The frontend search algorithm completed and returned successfully
*
* DVBFE_ALGO_SEARCH_ASLEEP
* The frontend search algorithm is sleeping
diff --git a/drivers/media/dvb/dvb-core/dvb_net.c b/drivers/media/dvb/dvb-core/dvb_net.c
index 0241a7c..8b8558f 100644
--- a/drivers/media/dvb/dvb-core/dvb_net.c
+++ b/drivers/media/dvb/dvb-core/dvb_net.c
@@ -1396,7 +1396,7 @@
return ret;
}
- /* binary compatiblity cruft */
+ /* binary compatibility cruft */
case __NET_ADD_IF_OLD:
{
struct __dvb_net_if_old *dvbnetif = parg;
diff --git a/drivers/media/dvb/dvb-core/dvbdev.h b/drivers/media/dvb/dvb-core/dvbdev.h
index 01fc704..f7b499d 100644
--- a/drivers/media/dvb/dvb-core/dvbdev.h
+++ b/drivers/media/dvb/dvb-core/dvbdev.h
@@ -54,6 +54,8 @@
module_param_array(adapter_nr, short, NULL, 0444); \
MODULE_PARM_DESC(adapter_nr, "DVB adapter numbers")
+struct dvb_frontend;
+
struct dvb_adapter {
int num;
struct list_head list_head;
@@ -69,6 +71,32 @@
int mfe_shared; /* indicates mutually exclusive frontends */
struct dvb_device *mfe_dvbdev; /* frontend device in use */
struct mutex mfe_lock; /* access lock for thread creation */
+
+ /* Allow the adapter/bridge driver to perform an action before and/or
+ * after the core handles an ioctl:
+ *
+ * DVB_FE_IOCTL_PRE indicates that the ioctl has not yet been handled.
+ * DVB_FE_IOCTL_POST indicates that the ioctl has been handled.
+ *
+ * When DVB_FE_IOCTL_PRE is passed to the callback as the stage arg:
+ *
+ * return 0 to allow dvb-core to handle the ioctl.
+ * return a positive int to prevent dvb-core from handling the ioctl,
+ * and exit without error.
+ * return a negative int to prevent dvb-core from handling the ioctl,
+ * and return that value as an error.
+ *
+ * When DVB_FE_IOCTL_POST is passed to the callback as the stage arg:
+ *
+ * return 0 to allow the dvb_frontend ioctl handler to exit normally.
+ * return a negative int to cause the dvb_frontend ioctl handler to
+ * return that value as an error.
+ */
+#define DVB_FE_IOCTL_PRE 0
+#define DVB_FE_IOCTL_POST 1
+ int (*fe_ioctl_override)(struct dvb_frontend *fe,
+ unsigned int cmd, void *parg,
+ unsigned int stage);
};
diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig
index 0e4b97f..2dee1bf 100644
--- a/drivers/media/dvb/dvb-usb/Kconfig
+++ b/drivers/media/dvb/dvb-usb/Kconfig
@@ -322,3 +322,11 @@
depends on DVB_USB
help
Say Y here to support the Japanese DTV receiver Friio.
+
+config DVB_USB_EC168
+ tristate "E3C EC168 DVB-T USB2.0 support"
+ depends on DVB_USB && EXPERIMENTAL
+ select DVB_EC100
+ select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMISE
+ help
+ Say Y here to support the E3C EC168 DVB-T USB2.0 receiver.
diff --git a/drivers/media/dvb/dvb-usb/Makefile b/drivers/media/dvb/dvb-usb/Makefile
index 85b83a4..72c92cb 100644
--- a/drivers/media/dvb/dvb-usb/Makefile
+++ b/drivers/media/dvb/dvb-usb/Makefile
@@ -82,6 +82,9 @@
dvb-usb-friio-objs = friio.o friio-fe.o
obj-$(CONFIG_DVB_USB_FRIIO) += dvb-usb-friio.o
+dvb-usb-ec168-objs = ec168.o
+obj-$(CONFIG_DVB_USB_EC168) += dvb-usb-ec168.o
+
EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/
# due to tuner-xc3028
EXTRA_CFLAGS += -Idrivers/media/common/tuners
diff --git a/drivers/media/dvb/dvb-usb/af9015.c b/drivers/media/dvb/dvb-usb/af9015.c
index cf042b3..8b60a60 100644
--- a/drivers/media/dvb/dvb-usb/af9015.c
+++ b/drivers/media/dvb/dvb-usb/af9015.c
@@ -730,7 +730,7 @@
goto error;
deb_info("%s: IR mode:%d\n", __func__, val);
for (i = 0; i < af9015_properties_count; i++) {
- if (val == AF9015_IR_MODE_DISABLED || val == 0x04) {
+ if (val == AF9015_IR_MODE_DISABLED) {
af9015_properties[i].rc_key_map = NULL;
af9015_properties[i].rc_key_map_size = 0;
} else if (dvb_usb_af9015_remote) {
@@ -868,6 +868,16 @@
af9015_config.ir_table_size =
ARRAY_SIZE(af9015_ir_table_avermedia);
break;
+ case USB_VID_MSI_2:
+ af9015_properties[i].rc_key_map =
+ af9015_rc_keys_msi_digivox_iii;
+ af9015_properties[i].rc_key_map_size =
+ ARRAY_SIZE(af9015_rc_keys_msi_digivox_iii);
+ af9015_config.ir_table =
+ af9015_ir_table_msi_digivox_iii;
+ af9015_config.ir_table_size =
+ ARRAY_SIZE(af9015_ir_table_msi_digivox_iii);
+ break;
}
}
}
@@ -1283,6 +1293,8 @@
{USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_MC810)},
{USB_DEVICE(USB_VID_KYE, USB_PID_GENIUS_TVGO_DVB_T03)},
/* 25 */{USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_399U_2)},
+ {USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_PC160_T)},
+ {USB_DEVICE(USB_VID_KWORLD_2, USB_PID_SVEON_STV20)},
{0},
};
MODULE_DEVICE_TABLE(usb, af9015_usb_table);
@@ -1296,7 +1308,7 @@
.firmware = "dvb-usb-af9015.fw",
.no_reconnect = 1,
- .size_of_priv = sizeof(struct af9015_state), \
+ .size_of_priv = sizeof(struct af9015_state),
.num_adapters = 2,
.adapter = {
@@ -1402,7 +1414,7 @@
.firmware = "dvb-usb-af9015.fw",
.no_reconnect = 1,
- .size_of_priv = sizeof(struct af9015_state), \
+ .size_of_priv = sizeof(struct af9015_state),
.num_adapters = 2,
.adapter = {
@@ -1508,7 +1520,7 @@
.firmware = "dvb-usb-af9015.fw",
.no_reconnect = 1,
- .size_of_priv = sizeof(struct af9015_state), \
+ .size_of_priv = sizeof(struct af9015_state),
.num_adapters = 2,
.adapter = {
@@ -1554,7 +1566,7 @@
.i2c_algo = &af9015_i2c_algo,
- .num_device_descs = 4, /* max 9 */
+ .num_device_descs = 6, /* max 9 */
.devices = {
{
.name = "AverMedia AVerTV Volar GPS 805 (A805)",
@@ -1577,6 +1589,17 @@
.cold_ids = {&af9015_usb_table[24], NULL},
.warm_ids = {NULL},
},
+ {
+ .name = "KWorld PlusTV DVB-T PCI Pro Card " \
+ "(DVB-T PC160-T)",
+ .cold_ids = {&af9015_usb_table[26], NULL},
+ .warm_ids = {NULL},
+ },
+ {
+ .name = "Sveon STV20 Tuner USB DVB-T HDTV",
+ .cold_ids = {&af9015_usb_table[27], NULL},
+ .warm_ids = {NULL},
+ },
}
},
};
diff --git a/drivers/media/dvb/dvb-usb/af9015.h b/drivers/media/dvb/dvb-usb/af9015.h
index c41f30e..931c851 100644
--- a/drivers/media/dvb/dvb-usb/af9015.h
+++ b/drivers/media/dvb/dvb-usb/af9015.h
@@ -95,6 +95,7 @@
AF9015_IR_MODE_HID,
AF9015_IR_MODE_RLC,
AF9015_IR_MODE_RC6,
+ AF9015_IR_MODE_POLLING, /* just guess */
};
struct af9015_state {
@@ -119,6 +120,7 @@
/* 5 */ AF9015_REMOTE_AVERMEDIA_KS,
};
+/* LeadTek - Y04G0051 */
/* Leadtek WinFast DTV Dongle Gold */
static struct dvb_usb_rc_key af9015_rc_keys_leadtek[] = {
{ 0x001e, KEY_1 },
@@ -131,64 +133,96 @@
{ 0x0025, KEY_8 },
{ 0x0026, KEY_9 },
{ 0x0027, KEY_0 },
- { 0x0028, KEY_ENTER },
- { 0x004f, KEY_VOLUMEUP },
- { 0x0050, KEY_VOLUMEDOWN },
- { 0x0051, KEY_CHANNELDOWN },
- { 0x0052, KEY_CHANNELUP },
+ { 0x0028, KEY_OK },
+ { 0x004f, KEY_RIGHT },
+ { 0x0050, KEY_LEFT },
+ { 0x0051, KEY_DOWN },
+ { 0x0052, KEY_UP },
+ { 0x011a, KEY_POWER2 },
+ { 0x04b4, KEY_TV },
+ { 0x04b3, KEY_RED },
+ { 0x04b2, KEY_GREEN },
+ { 0x04b1, KEY_YELLOW },
+ { 0x04b0, KEY_BLUE },
+ { 0x003d, KEY_TEXT },
+ { 0x0113, KEY_SLEEP },
+ { 0x0010, KEY_MUTE },
+ { 0x0105, KEY_ESC },
+ { 0x0009, KEY_SCREEN },
+ { 0x010f, KEY_MENU },
+ { 0x003f, KEY_CHANNEL },
+ { 0x0013, KEY_REWIND },
+ { 0x0012, KEY_PLAY },
+ { 0x0011, KEY_FASTFORWARD },
+ { 0x0005, KEY_PREVIOUS },
+ { 0x0029, KEY_STOP },
+ { 0x002b, KEY_NEXT },
+ { 0x0041, KEY_EPG },
+ { 0x0019, KEY_VIDEO },
+ { 0x0016, KEY_AUDIO },
+ { 0x0037, KEY_DOT },
+ { 0x002a, KEY_AGAIN },
+ { 0x002c, KEY_CAMERA },
+ { 0x003c, KEY_NEW },
+ { 0x0115, KEY_RECORD },
+ { 0x010b, KEY_TIME },
+ { 0x0043, KEY_VOLUMEUP },
+ { 0x0042, KEY_VOLUMEDOWN },
+ { 0x004b, KEY_CHANNELUP },
+ { 0x004e, KEY_CHANNELDOWN },
};
static u8 af9015_ir_table_leadtek[] = {
- 0x03, 0xfc, 0x00, 0xff, 0x1a, 0x01, 0x00,
- 0x03, 0xfc, 0x56, 0xa9, 0x00, 0x00, 0x00,
- 0x03, 0xfc, 0x4b, 0xb4, 0x00, 0x00, 0x00,
- 0x03, 0xfc, 0x4c, 0xb3, 0xb2, 0x04, 0x00,
- 0x03, 0xfc, 0x4d, 0xb2, 0x00, 0x00, 0x00,
- 0x03, 0xfc, 0x4e, 0xb1, 0x00, 0x00, 0x00,
- 0x03, 0xfc, 0x1f, 0xe0, 0x3d, 0x00, 0x00,
- 0x03, 0xfc, 0x40, 0xbf, 0x13, 0x01, 0x00,
- 0x03, 0xfc, 0x14, 0xeb, 0x10, 0x00, 0x00,
- 0x03, 0xfc, 0x49, 0xb6, 0x05, 0x01, 0x00,
- 0x03, 0xfc, 0x50, 0xaf, 0x29, 0x00, 0x00,
- 0x03, 0xfc, 0x0c, 0xf3, 0x52, 0x00, 0x00,
- 0x03, 0xfc, 0x03, 0xfc, 0x09, 0x00, 0x00,
- 0x03, 0xfc, 0x08, 0xf7, 0x50, 0x00, 0x00,
- 0x03, 0xfc, 0x13, 0xec, 0x28, 0x00, 0x00,
- 0x03, 0xfc, 0x04, 0xfb, 0x4f, 0x00, 0x00,
- 0x03, 0xfc, 0x4f, 0xb0, 0x0f, 0x01, 0x00,
- 0x03, 0xfc, 0x10, 0xef, 0x51, 0x00, 0x00,
- 0x03, 0xfc, 0x51, 0xae, 0x3f, 0x00, 0x00,
- 0x03, 0xfc, 0x42, 0xbd, 0x13, 0x00, 0x00,
- 0x03, 0xfc, 0x43, 0xbc, 0x00, 0x00, 0x00,
- 0x03, 0xfc, 0x44, 0xbb, 0x11, 0x00, 0x00,
- 0x03, 0xfc, 0x52, 0xad, 0x19, 0x00, 0x00,
- 0x03, 0xfc, 0x54, 0xab, 0x05, 0x00, 0x00,
- 0x03, 0xfc, 0x46, 0xb9, 0x29, 0x00, 0x00,
- 0x03, 0xfc, 0x55, 0xaa, 0x2b, 0x00, 0x00,
- 0x03, 0xfc, 0x53, 0xac, 0x41, 0x00, 0x00,
- 0x03, 0xfc, 0x05, 0xfa, 0x1e, 0x00, 0x00,
- 0x03, 0xfc, 0x06, 0xf9, 0x1f, 0x00, 0x00,
- 0x03, 0xfc, 0x07, 0xf8, 0x20, 0x00, 0x00,
- 0x03, 0xfc, 0x1e, 0xe1, 0x19, 0x00, 0x00,
- 0x03, 0xfc, 0x09, 0xf6, 0x21, 0x00, 0x00,
- 0x03, 0xfc, 0x0a, 0xf5, 0x22, 0x00, 0x00,
- 0x03, 0xfc, 0x0b, 0xf4, 0x23, 0x00, 0x00,
- 0x03, 0xfc, 0x1b, 0xe4, 0x16, 0x00, 0x00,
- 0x03, 0xfc, 0x0d, 0xf2, 0x24, 0x00, 0x00,
- 0x03, 0xfc, 0x0e, 0xf1, 0x25, 0x00, 0x00,
- 0x03, 0xfc, 0x0f, 0xf0, 0x26, 0x00, 0x00,
- 0x03, 0xfc, 0x16, 0xe9, 0x28, 0x00, 0x00,
- 0x03, 0xfc, 0x41, 0xbe, 0x37, 0x00, 0x00,
- 0x03, 0xfc, 0x12, 0xed, 0x27, 0x00, 0x00,
- 0x03, 0xfc, 0x11, 0xee, 0x2a, 0x00, 0x00,
- 0x03, 0xfc, 0x48, 0xb7, 0x2c, 0x00, 0x00,
- 0x03, 0xfc, 0x4a, 0xb5, 0x3c, 0x00, 0x00,
- 0x03, 0xfc, 0x47, 0xb8, 0x15, 0x01, 0x00,
- 0x03, 0xfc, 0x45, 0xba, 0x0b, 0x01, 0x00,
- 0x03, 0xfc, 0x5e, 0xa1, 0x43, 0x00, 0x00,
- 0x03, 0xfc, 0x5a, 0xa5, 0x42, 0x00, 0x00,
- 0x03, 0xfc, 0x5b, 0xa4, 0x4b, 0x00, 0x00,
- 0x03, 0xfc, 0x5f, 0xa0, 0x4e, 0x00, 0x00,
+ 0x03, 0xfc, 0x00, 0xff, 0x1a, 0x01, 0x00, /* KEY_POWER2 */
+ 0x03, 0xfc, 0x56, 0xa9, 0xb4, 0x04, 0x00, /* KEY_TV */
+ 0x03, 0xfc, 0x4b, 0xb4, 0xb3, 0x04, 0x00, /* KEY_RED */
+ 0x03, 0xfc, 0x4c, 0xb3, 0xb2, 0x04, 0x00, /* KEY_GREEN */
+ 0x03, 0xfc, 0x4d, 0xb2, 0xb1, 0x04, 0x00, /* KEY_YELLOW */
+ 0x03, 0xfc, 0x4e, 0xb1, 0xb0, 0x04, 0x00, /* KEY_BLUE */
+ 0x03, 0xfc, 0x1f, 0xe0, 0x3d, 0x00, 0x00, /* KEY_TEXT */
+ 0x03, 0xfc, 0x40, 0xbf, 0x13, 0x01, 0x00, /* KEY_SLEEP */
+ 0x03, 0xfc, 0x14, 0xeb, 0x10, 0x00, 0x00, /* KEY_MUTE */
+ 0x03, 0xfc, 0x49, 0xb6, 0x05, 0x01, 0x00, /* KEY_ESC */
+ 0x03, 0xfc, 0x50, 0xaf, 0x29, 0x00, 0x00, /* KEY_STOP (1)*/
+ 0x03, 0xfc, 0x0c, 0xf3, 0x52, 0x00, 0x00, /* KEY_UP */
+ 0x03, 0xfc, 0x03, 0xfc, 0x09, 0x00, 0x00, /* KEY_SCREEN */
+ 0x03, 0xfc, 0x08, 0xf7, 0x50, 0x00, 0x00, /* KEY_LEFT */
+ 0x03, 0xfc, 0x13, 0xec, 0x28, 0x00, 0x00, /* KEY_OK (1) */
+ 0x03, 0xfc, 0x04, 0xfb, 0x4f, 0x00, 0x00, /* KEY_RIGHT */
+ 0x03, 0xfc, 0x4f, 0xb0, 0x0f, 0x01, 0x00, /* KEY_MENU */
+ 0x03, 0xfc, 0x10, 0xef, 0x51, 0x00, 0x00, /* KEY_DOWN */
+ 0x03, 0xfc, 0x51, 0xae, 0x3f, 0x00, 0x00, /* KEY_CHANNEL */
+ 0x03, 0xfc, 0x42, 0xbd, 0x13, 0x00, 0x00, /* KEY_REWIND */
+ 0x03, 0xfc, 0x43, 0xbc, 0x12, 0x00, 0x00, /* KEY_PLAY */
+ 0x03, 0xfc, 0x44, 0xbb, 0x11, 0x00, 0x00, /* KEY_FASTFORWARD */
+ 0x03, 0xfc, 0x52, 0xad, 0x19, 0x00, 0x00, /* KEY_VIDEO (1) */
+ 0x03, 0xfc, 0x54, 0xab, 0x05, 0x00, 0x00, /* KEY_PREVIOUS */
+ 0x03, 0xfc, 0x46, 0xb9, 0x29, 0x00, 0x00, /* KEY_STOP (2) */
+ 0x03, 0xfc, 0x55, 0xaa, 0x2b, 0x00, 0x00, /* KEY_NEXT */
+ 0x03, 0xfc, 0x53, 0xac, 0x41, 0x00, 0x00, /* KEY_EPG */
+ 0x03, 0xfc, 0x05, 0xfa, 0x1e, 0x00, 0x00, /* KEY_1 */
+ 0x03, 0xfc, 0x06, 0xf9, 0x1f, 0x00, 0x00, /* KEY_2 */
+ 0x03, 0xfc, 0x07, 0xf8, 0x20, 0x00, 0x00, /* KEY_3 */
+ 0x03, 0xfc, 0x1e, 0xe1, 0x19, 0x00, 0x00, /* KEY_VIDEO (2) */
+ 0x03, 0xfc, 0x09, 0xf6, 0x21, 0x00, 0x00, /* KEY_4 */
+ 0x03, 0xfc, 0x0a, 0xf5, 0x22, 0x00, 0x00, /* KEY_5 */
+ 0x03, 0xfc, 0x0b, 0xf4, 0x23, 0x00, 0x00, /* KEY_6 */
+ 0x03, 0xfc, 0x1b, 0xe4, 0x16, 0x00, 0x00, /* KEY_AUDIO */
+ 0x03, 0xfc, 0x0d, 0xf2, 0x24, 0x00, 0x00, /* KEY_7 */
+ 0x03, 0xfc, 0x0e, 0xf1, 0x25, 0x00, 0x00, /* KEY_8 */
+ 0x03, 0xfc, 0x0f, 0xf0, 0x26, 0x00, 0x00, /* KEY_9 */
+ 0x03, 0xfc, 0x16, 0xe9, 0x28, 0x00, 0x00, /* KEY_OK (2) */
+ 0x03, 0xfc, 0x41, 0xbe, 0x37, 0x00, 0x00, /* KEY_DOT */
+ 0x03, 0xfc, 0x12, 0xed, 0x27, 0x00, 0x00, /* KEY_0 */
+ 0x03, 0xfc, 0x11, 0xee, 0x2a, 0x00, 0x00, /* KEY_AGAIN */
+ 0x03, 0xfc, 0x48, 0xb7, 0x2c, 0x00, 0x00, /* KEY_CAMERA */
+ 0x03, 0xfc, 0x4a, 0xb5, 0x3c, 0x00, 0x00, /* KEY_NEW */
+ 0x03, 0xfc, 0x47, 0xb8, 0x15, 0x01, 0x00, /* KEY_RECORD */
+ 0x03, 0xfc, 0x45, 0xba, 0x0b, 0x01, 0x00, /* KEY_TIME */
+ 0x03, 0xfc, 0x5e, 0xa1, 0x43, 0x00, 0x00, /* KEY_VOLUMEUP */
+ 0x03, 0xfc, 0x5a, 0xa5, 0x42, 0x00, 0x00, /* KEY_VOLUMEDOWN */
+ 0x03, 0xfc, 0x5b, 0xa4, 0x4b, 0x00, 0x00, /* KEY_CHANNELUP */
+ 0x03, 0xfc, 0x5f, 0xa0, 0x4e, 0x00, 0x00, /* KEY_CHANNELDOWN */
};
/* TwinHan AzureWave AD-TU700(704J) */
@@ -746,4 +780,75 @@
0x00, 0xff, 0x84, 0x7b, 0x27, 0x07, 0x00,
};
+/* MSI DIGIVOX mini III */
+static struct dvb_usb_rc_key af9015_rc_keys_msi_digivox_iii[] = {
+ { 0x0713, KEY_POWER }, /* [red power button] */
+ { 0x073b, KEY_VIDEO }, /* Source */
+ { 0x073e, KEY_ZOOM }, /* Zoom */
+ { 0x070b, KEY_POWER2 }, /* ShutDown */
+ { 0x071e, KEY_1 },
+ { 0x071f, KEY_2 },
+ { 0x0720, KEY_3 },
+ { 0x0721, KEY_4 },
+ { 0x0722, KEY_5 },
+ { 0x0723, KEY_6 },
+ { 0x0724, KEY_7 },
+ { 0x0725, KEY_8 },
+ { 0x0726, KEY_9 },
+ { 0x0727, KEY_0 },
+ { 0x0752, KEY_CHANNELUP }, /* CH+ */
+ { 0x0751, KEY_CHANNELDOWN }, /* CH- */
+ { 0x0750, KEY_VOLUMEUP }, /* Vol+ */
+ { 0x074f, KEY_VOLUMEDOWN }, /* Vol- */
+ { 0x0705, KEY_ESC }, /* [back up arrow] */
+ { 0x0708, KEY_OK }, /* [enter arrow] */
+ { 0x073f, KEY_RECORD }, /* Rec */
+ { 0x0716, KEY_STOP }, /* Stop */
+ { 0x072a, KEY_PLAY }, /* Play */
+ { 0x073c, KEY_MUTE }, /* Mute */
+ { 0x0718, KEY_UP },
+ { 0x0707, KEY_DOWN },
+ { 0x070f, KEY_LEFT },
+ { 0x0715, KEY_RIGHT },
+ { 0x0736, KEY_RED },
+ { 0x0737, KEY_GREEN },
+ { 0x072d, KEY_YELLOW },
+ { 0x072e, KEY_BLUE },
+};
+
+static u8 af9015_ir_table_msi_digivox_iii[] = {
+ 0x61, 0xd6, 0x43, 0xbc, 0x13, 0x07, 0x00, /* KEY_POWER */
+ 0x61, 0xd6, 0x01, 0xfe, 0x3b, 0x07, 0x00, /* KEY_VIDEO */
+ 0x61, 0xd6, 0x0b, 0xf4, 0x3e, 0x07, 0x00, /* KEY_ZOOM */
+ 0x61, 0xd6, 0x03, 0xfc, 0x0b, 0x07, 0x00, /* KEY_POWER2 */
+ 0x61, 0xd6, 0x04, 0xfb, 0x1e, 0x07, 0x00, /* KEY_1 */
+ 0x61, 0xd6, 0x08, 0xf7, 0x1f, 0x07, 0x00, /* KEY_2 */
+ 0x61, 0xd6, 0x02, 0xfd, 0x20, 0x07, 0x00, /* KEY_3 */
+ 0x61, 0xd6, 0x0f, 0xf0, 0x21, 0x07, 0x00, /* KEY_4 */
+ 0x61, 0xd6, 0x05, 0xfa, 0x22, 0x07, 0x00, /* KEY_5 */
+ 0x61, 0xd6, 0x06, 0xf9, 0x23, 0x07, 0x00, /* KEY_6 */
+ 0x61, 0xd6, 0x0c, 0xf3, 0x24, 0x07, 0x00, /* KEY_7 */
+ 0x61, 0xd6, 0x0d, 0xf2, 0x25, 0x07, 0x00, /* KEY_8 */
+ 0x61, 0xd6, 0x0a, 0xf5, 0x26, 0x07, 0x00, /* KEY_9 */
+ 0x61, 0xd6, 0x11, 0xee, 0x27, 0x07, 0x00, /* KEY_0 */
+ 0x61, 0xd6, 0x09, 0xf6, 0x52, 0x07, 0x00, /* KEY_CHANNELUP */
+ 0x61, 0xd6, 0x07, 0xf8, 0x51, 0x07, 0x00, /* KEY_CHANNELDOWN */
+ 0x61, 0xd6, 0x0e, 0xf1, 0x50, 0x07, 0x00, /* KEY_VOLUMEUP */
+ 0x61, 0xd6, 0x13, 0xec, 0x4f, 0x07, 0x00, /* KEY_VOLUMEDOWN */
+ 0x61, 0xd6, 0x10, 0xef, 0x05, 0x07, 0x00, /* KEY_ESC */
+ 0x61, 0xd6, 0x12, 0xed, 0x08, 0x07, 0x00, /* KEY_OK */
+ 0x61, 0xd6, 0x14, 0xeb, 0x3f, 0x07, 0x00, /* KEY_RECORD */
+ 0x61, 0xd6, 0x15, 0xea, 0x16, 0x07, 0x00, /* KEY_STOP */
+ 0x61, 0xd6, 0x16, 0xe9, 0x2a, 0x07, 0x00, /* KEY_PLAY */
+ 0x61, 0xd6, 0x17, 0xe8, 0x3c, 0x07, 0x00, /* KEY_MUTE */
+ 0x61, 0xd6, 0x18, 0xe7, 0x18, 0x07, 0x00, /* KEY_UP */
+ 0x61, 0xd6, 0x19, 0xe6, 0x07, 0x07, 0x00, /* KEY_DOWN */
+ 0x61, 0xd6, 0x1a, 0xe5, 0x0f, 0x07, 0x00, /* KEY_LEFT */
+ 0x61, 0xd6, 0x1b, 0xe4, 0x15, 0x07, 0x00, /* KEY_RIGHT */
+ 0x61, 0xd6, 0x1c, 0xe3, 0x36, 0x07, 0x00, /* KEY_RED */
+ 0x61, 0xd6, 0x1d, 0xe2, 0x37, 0x07, 0x00, /* KEY_GREEN */
+ 0x61, 0xd6, 0x1e, 0xe1, 0x2d, 0x07, 0x00, /* KEY_YELLOW */
+ 0x61, 0xd6, 0x1f, 0xe0, 0x2e, 0x07, 0x00, /* KEY_BLUE */
+};
+
#endif
diff --git a/drivers/media/dvb/dvb-usb/anysee.c b/drivers/media/dvb/dvb-usb/anysee.c
index 2ae7f64..bb69f37 100644
--- a/drivers/media/dvb/dvb-usb/anysee.c
+++ b/drivers/media/dvb/dvb-usb/anysee.c
@@ -344,7 +344,7 @@
if (ret)
return ret;
- err("Unkown Anysee version: %02x %02x %02x. "\
+ err("Unknown Anysee version: %02x %02x %02x. "\
"Please report the <linux-dvb@linuxtv.org>.",
hw_info[0], hw_info[1], hw_info[2]);
diff --git a/drivers/media/dvb/dvb-usb/cxusb.c b/drivers/media/dvb/dvb-usb/cxusb.c
index 2a53dd0..05fb28e9 100644
--- a/drivers/media/dvb/dvb-usb/cxusb.c
+++ b/drivers/media/dvb/dvb-usb/cxusb.c
@@ -36,9 +36,11 @@
#include "tuner-xc2028.h"
#include "tuner-simple.h"
#include "mxl5005s.h"
+#include "max2165.h"
#include "dib7000p.h"
#include "dib0070.h"
#include "lgs8gxx.h"
+#include "atbm8830.h"
/* debug */
static int dvb_usb_cxusb_debug;
@@ -714,6 +716,11 @@
.AgcMasterByte = 0x00,
};
+static struct max2165_config mygica_d689_max2165_cfg = {
+ .i2c_address = 0x60,
+ .osc_clk = 20
+};
+
/* Callbacks for DVB USB */
static int cxusb_fmd1216me_tuner_attach(struct dvb_usb_adapter *adap)
{
@@ -813,6 +820,14 @@
return (fe == NULL) ? -EIO : 0;
}
+static int cxusb_mygica_d689_tuner_attach(struct dvb_usb_adapter *adap)
+{
+ struct dvb_frontend *fe;
+ fe = dvb_attach(max2165_attach, adap->fe,
+ &adap->dev->i2c_adap, &mygica_d689_max2165_cfg);
+ return (fe == NULL) ? -EIO : 0;
+}
+
static int cxusb_cx22702_frontend_attach(struct dvb_usb_adapter *adap)
{
u8 b;
@@ -1160,6 +1175,55 @@
return 0;
}
+static struct atbm8830_config mygica_d689_atbm8830_cfg = {
+ .prod = ATBM8830_PROD_8830,
+ .demod_address = 0x40,
+ .serial_ts = 0,
+ .ts_sampling_edge = 1,
+ .ts_clk_gated = 0,
+ .osc_clk_freq = 30400, /* in kHz */
+ .if_freq = 0, /* zero IF */
+ .zif_swap_iq = 1,
+};
+
+static int cxusb_mygica_d689_frontend_attach(struct dvb_usb_adapter *adap)
+{
+ struct dvb_usb_device *d = adap->dev;
+
+ /* Select required USB configuration */
+ if (usb_set_interface(d->udev, 0, 0) < 0)
+ err("set interface failed");
+
+ /* Unblock all USB pipes */
+ usb_clear_halt(d->udev,
+ usb_sndbulkpipe(d->udev, d->props.generic_bulk_ctrl_endpoint));
+ usb_clear_halt(d->udev,
+ usb_rcvbulkpipe(d->udev, d->props.generic_bulk_ctrl_endpoint));
+ usb_clear_halt(d->udev,
+ usb_rcvbulkpipe(d->udev, d->props.adapter[0].stream.endpoint));
+
+
+ /* Reset the tuner */
+ if (cxusb_d680_dmb_gpio_tuner(d, 0x07, 0) < 0) {
+ err("clear tuner gpio failed");
+ return -EIO;
+ }
+ msleep(100);
+ if (cxusb_d680_dmb_gpio_tuner(d, 0x07, 1) < 0) {
+ err("set tuner gpio failed");
+ return -EIO;
+ }
+ msleep(100);
+
+ /* Attach frontend */
+ adap->fe = dvb_attach(atbm8830_attach, &mygica_d689_atbm8830_cfg,
+ &d->i2c_adap);
+ if (adap->fe == NULL)
+ return -EIO;
+
+ return 0;
+}
+
/*
* DViCO has shipped two devices with the same USB ID, but only one of them
* needs a firmware download. Check the device class details to see if they
@@ -1240,6 +1304,7 @@
static struct dvb_usb_device_properties cxusb_bluebird_nano2_needsfirmware_properties;
static struct dvb_usb_device_properties cxusb_aver_a868r_properties;
static struct dvb_usb_device_properties cxusb_d680_dmb_properties;
+static struct dvb_usb_device_properties cxusb_mygica_d689_properties;
static int cxusb_probe(struct usb_interface *intf,
const struct usb_device_id *id)
@@ -1268,6 +1333,8 @@
THIS_MODULE, NULL, adapter_nr) ||
0 == dvb_usb_device_init(intf, &cxusb_d680_dmb_properties,
THIS_MODULE, NULL, adapter_nr) ||
+ 0 == dvb_usb_device_init(intf, &cxusb_mygica_d689_properties,
+ THIS_MODULE, NULL, adapter_nr) ||
0)
return 0;
@@ -1294,6 +1361,7 @@
{ USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR_A868R) },
{ USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DUAL_4_REV_2) },
{ USB_DEVICE(USB_VID_CONEXANT, USB_PID_CONEXANT_D680_DMB) },
+ { USB_DEVICE(USB_VID_CONEXANT, USB_PID_MYGICA_D689) },
{} /* Terminating entry */
};
MODULE_DEVICE_TABLE (usb, cxusb_table);
@@ -1837,6 +1905,55 @@
}
};
+static struct dvb_usb_device_properties cxusb_mygica_d689_properties = {
+ .caps = DVB_USB_IS_AN_I2C_ADAPTER,
+
+ .usb_ctrl = CYPRESS_FX2,
+
+ .size_of_priv = sizeof(struct cxusb_state),
+
+ .num_adapters = 1,
+ .adapter = {
+ {
+ .streaming_ctrl = cxusb_d680_dmb_streaming_ctrl,
+ .frontend_attach = cxusb_mygica_d689_frontend_attach,
+ .tuner_attach = cxusb_mygica_d689_tuner_attach,
+
+ /* parameter for the MPEG2-data transfer */
+ .stream = {
+ .type = USB_BULK,
+ .count = 5,
+ .endpoint = 0x02,
+ .u = {
+ .bulk = {
+ .buffersize = 8192,
+ }
+ }
+ },
+ },
+ },
+
+ .power_ctrl = cxusb_d680_dmb_power_ctrl,
+
+ .i2c_algo = &cxusb_i2c_algo,
+
+ .generic_bulk_ctrl_endpoint = 0x01,
+
+ .rc_interval = 100,
+ .rc_key_map = d680_dmb_rc_keys,
+ .rc_key_map_size = ARRAY_SIZE(d680_dmb_rc_keys),
+ .rc_query = cxusb_d680_dmb_rc_query,
+
+ .num_device_descs = 1,
+ .devices = {
+ {
+ "Mygica D689 DMB-TH",
+ { NULL },
+ { &cxusb_table[19], NULL },
+ },
+ }
+};
+
static struct usb_driver cxusb_driver = {
.name = "dvb_usb_cxusb",
.probe = cxusb_probe,
diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c
index 6bd8951..684146f 100644
--- a/drivers/media/dvb/dvb-usb/dib0700_devices.c
+++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c
@@ -558,8 +558,7 @@
struct dib0700_rc_response {
u8 report_id;
u8 data_state;
- u8 system_msb;
- u8 system_lsb;
+ u16 system;
u8 data;
u8 not_data;
};
@@ -589,37 +588,50 @@
return 0;
}
- if (actlen != sizeof(buf)) {
- /* We didn't get back the 6 byte message we expected */
- err("Unexpected RC response size [%d]", actlen);
- return -1;
+
+ switch (dvb_usb_dib0700_ir_proto) {
+ case 0:
+ poll_reply.report_id = 0;
+ poll_reply.data_state = 1;
+ poll_reply.system = buf[2];
+ poll_reply.data = buf[4];
+ poll_reply.not_data = buf[5];
+
+ /* NEC protocol sends repeat code as 0 0 0 FF */
+ if ((poll_reply.system == 0x00) && (poll_reply.data == 0x00)
+ && (poll_reply.not_data == 0xff)) {
+ poll_reply.data_state = 2;
+ break;
+ }
+ break;
+ default:
+ if (actlen != sizeof(buf)) {
+ /* We didn't get back the 6 byte message we expected */
+ err("Unexpected RC response size [%d]", actlen);
+ return -1;
+ }
+
+ poll_reply.report_id = buf[0];
+ poll_reply.data_state = buf[1];
+ poll_reply.system = (buf[2] << 8) | buf[3];
+ poll_reply.data = buf[4];
+ poll_reply.not_data = buf[5];
+
+ break;
}
- poll_reply.report_id = buf[0];
- poll_reply.data_state = buf[1];
- poll_reply.system_msb = buf[2];
- poll_reply.system_lsb = buf[3];
- poll_reply.data = buf[4];
- poll_reply.not_data = buf[5];
-
- /*
- info("rid=%02x ds=%02x sm=%02x sl=%02x d=%02x nd=%02x\n",
- poll_reply.report_id, poll_reply.data_state,
- poll_reply.system_msb, poll_reply.system_lsb,
- poll_reply.data, poll_reply.not_data);
- */
-
if ((poll_reply.data + poll_reply.not_data) != 0xff) {
/* Key failed integrity check */
- err("key failed integrity check: %02x %02x %02x %02x",
- poll_reply.system_msb, poll_reply.system_lsb,
+ err("key failed integrity check: %04x %02x %02x",
+ poll_reply.system,
poll_reply.data, poll_reply.not_data);
return -1;
}
+
/* Find the key in the map */
for (i = 0; i < d->props.rc_key_map_size; i++) {
- if (rc5_custom(&keymap[i]) == poll_reply.system_lsb &&
+ if (rc5_custom(&keymap[i]) == (poll_reply.system & 0xff) &&
rc5_data(&keymap[i]) == poll_reply.data) {
*event = keymap[i].event;
found = 1;
@@ -628,8 +640,8 @@
}
if (found == 0) {
- err("Unknown remote controller key: %02x %02x %02x %02x",
- poll_reply.system_msb, poll_reply.system_lsb,
+ err("Unknown remote controller key: %04x %02x %02x",
+ poll_reply.system,
poll_reply.data, poll_reply.not_data);
d->last_event = 0;
return 0;
@@ -874,6 +886,49 @@
{ 0x1d37, KEY_RECORD },
{ 0x1d3b, KEY_GOTO },
{ 0x1d3d, KEY_POWER },
+
+ /* Key codes for the Pixelview SBTVD remote (proto NEC) */
+ { 0x8613, KEY_MUTE },
+ { 0x8612, KEY_POWER },
+ { 0x8601, KEY_1 },
+ { 0x8602, KEY_2 },
+ { 0x8603, KEY_3 },
+ { 0x8604, KEY_4 },
+ { 0x8605, KEY_5 },
+ { 0x8606, KEY_6 },
+ { 0x8607, KEY_7 },
+ { 0x8608, KEY_8 },
+ { 0x8609, KEY_9 },
+ { 0x8600, KEY_0 },
+ { 0x860d, KEY_CHANNELUP },
+ { 0x8619, KEY_CHANNELDOWN },
+ { 0x8610, KEY_VOLUMEUP },
+ { 0x860c, KEY_VOLUMEDOWN },
+
+ { 0x860a, KEY_CAMERA },
+ { 0x860b, KEY_ZOOM },
+ { 0x861b, KEY_BACKSPACE },
+ { 0x8615, KEY_ENTER },
+
+ { 0x861d, KEY_UP },
+ { 0x861e, KEY_DOWN },
+ { 0x860e, KEY_LEFT },
+ { 0x860f, KEY_RIGHT },
+
+ { 0x8618, KEY_RECORD },
+ { 0x861a, KEY_STOP },
+
+ /* Key codes for the EvolutePC TVWay+ remote (proto NEC) */
+ { 0x7a00, KEY_MENU },
+ { 0x7a01, KEY_RECORD },
+ { 0x7a02, KEY_PLAY },
+ { 0x7a03, KEY_STOP },
+ { 0x7a10, KEY_CHANNELUP },
+ { 0x7a11, KEY_CHANNELDOWN },
+ { 0x7a12, KEY_VOLUMEUP },
+ { 0x7a13, KEY_VOLUMEDOWN },
+ { 0x7a40, KEY_POWER },
+ { 0x7a41, KEY_MUTE },
};
/* STK7700P: Hauppauge Nova-T Stick, AVerMedia Volar */
@@ -1133,6 +1188,7 @@
.clock_khz = 12000,
.clock_pad_drive = 0,
.flip_chip = 1,
+ .charge_pump = 2,
};
static int dib7070_set_param_override(struct dvb_frontend *fe, struct dvb_frontend_parameters *fep)
@@ -1209,6 +1265,16 @@
return 0;
}
+static int stk70x0p_pid_filter(struct dvb_usb_adapter *adapter, int index, u16 pid, int onoff)
+{
+ return dib7000p_pid_filter(adapter->fe, index, pid, onoff);
+}
+
+static int stk70x0p_pid_filter_ctrl(struct dvb_usb_adapter *adapter, int onoff)
+{
+ return dib7000p_pid_filter_ctrl(adapter->fe, onoff);
+}
+
static struct dibx000_bandwidth_config dib7070_bw_config_12_mhz = {
60000, 15000, // internal, sampling
1, 20, 3, 1, 0, // pll_cfg: prediv, ratio, range, reset, bypass
@@ -1500,6 +1566,15 @@
return 0;
}
+static int stk807x_pid_filter(struct dvb_usb_adapter *adapter, int index, u16 pid, int onoff)
+{
+ return dib8000_pid_filter(adapter->fe, index, pid, onoff);
+}
+
+static int stk807x_pid_filter_ctrl(struct dvb_usb_adapter *adapter, int onoff)
+{
+ return dib8000_pid_filter_ctrl(adapter->fe, onoff);
+}
/* STK807x */
static int stk807x_frontend_attach(struct dvb_usb_adapter *adap)
@@ -1861,6 +1936,7 @@
{ USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK807XPVR) },
{ USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK807XP) },
{ USB_DEVICE(USB_VID_PIXELVIEW, USB_PID_PIXELVIEW_SBTVD) },
+ { USB_DEVICE(USB_VID_EVOLUTEPC, USB_PID_TVWAY_PLUS) },
{ 0 } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table);
@@ -1895,6 +1971,10 @@
.num_adapters = 1,
.adapter = {
{
+ .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+ .pid_filter_count = 32,
+ .pid_filter = stk70x0p_pid_filter,
+ .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
.frontend_attach = stk7700p_frontend_attach,
.tuner_attach = stk7700p_tuner_attach,
@@ -1976,11 +2056,19 @@
.num_adapters = 2,
.adapter = {
{
+ .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+ .pid_filter_count = 32,
+ .pid_filter = stk70x0p_pid_filter,
+ .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
.frontend_attach = stk7700d_frontend_attach,
.tuner_attach = stk7700d_tuner_attach,
DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
}, {
+ .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+ .pid_filter_count = 32,
+ .pid_filter = stk70x0p_pid_filter,
+ .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
.frontend_attach = stk7700d_frontend_attach,
.tuner_attach = stk7700d_tuner_attach,
@@ -2023,6 +2111,10 @@
.num_adapters = 1,
.adapter = {
{
+ .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+ .pid_filter_count = 32,
+ .pid_filter = stk70x0p_pid_filter,
+ .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
.frontend_attach = stk7700P2_frontend_attach,
.tuner_attach = stk7700d_tuner_attach,
@@ -2055,6 +2147,10 @@
.num_adapters = 1,
.adapter = {
{
+ .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+ .pid_filter_count = 32,
+ .pid_filter = stk70x0p_pid_filter,
+ .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
.frontend_attach = stk7070p_frontend_attach,
.tuner_attach = dib7070p_tuner_attach,
@@ -2122,6 +2218,10 @@
.num_adapters = 1,
.adapter = {
{
+ .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+ .pid_filter_count = 32,
+ .pid_filter = stk70x0p_pid_filter,
+ .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
.frontend_attach = stk7070p_frontend_attach,
.tuner_attach = dib7070p_tuner_attach,
@@ -2157,6 +2257,10 @@
.num_adapters = 2,
.adapter = {
{
+ .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+ .pid_filter_count = 32,
+ .pid_filter = stk70x0p_pid_filter,
+ .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
.frontend_attach = stk7070pd_frontend_attach0,
.tuner_attach = dib7070p_tuner_attach,
@@ -2164,6 +2268,10 @@
.size_of_priv = sizeof(struct dib0700_adapter_state),
}, {
+ .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+ .pid_filter_count = 32,
+ .pid_filter = stk70x0p_pid_filter,
+ .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
.frontend_attach = stk7070pd_frontend_attach1,
.tuner_attach = dib7070p_tuner_attach,
@@ -2210,6 +2318,10 @@
.num_adapters = 1,
.adapter = {
{
+ .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+ .pid_filter_count = 32,
+ .pid_filter = stk70x0p_pid_filter,
+ .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
.frontend_attach = stk7700ph_frontend_attach,
.tuner_attach = stk7700ph_tuner_attach,
@@ -2322,6 +2434,10 @@
.num_adapters = 1,
.adapter = {
{
+ .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+ .pid_filter_count = 32,
+ .pid_filter = stk70x0p_pid_filter,
+ .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
.frontend_attach = stk7070p_frontend_attach,
.tuner_attach = dib7770p_tuner_attach,
@@ -2353,6 +2469,10 @@
.num_adapters = 1,
.adapter = {
{
+ .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+ .pid_filter_count = 32,
+ .pid_filter = stk807x_pid_filter,
+ .pid_filter_ctrl = stk807x_pid_filter_ctrl,
.frontend_attach = stk807x_frontend_attach,
.tuner_attach = dib807x_tuner_attach,
@@ -2363,7 +2483,7 @@
},
},
- .num_device_descs = 2,
+ .num_device_descs = 3,
.devices = {
{ "DiBcom STK807xP reference design",
{ &dib0700_usb_id_table[62], NULL },
@@ -2373,6 +2493,10 @@
{ &dib0700_usb_id_table[63], NULL },
{ NULL },
},
+ { "EvolutePC TVWay+",
+ { &dib0700_usb_id_table[64], NULL },
+ { NULL },
+ },
},
.rc_interval = DEFAULT_RC_INTERVAL,
@@ -2384,6 +2508,10 @@
.num_adapters = 2,
.adapter = {
{
+ .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+ .pid_filter_count = 32,
+ .pid_filter = stk807x_pid_filter,
+ .pid_filter_ctrl = stk807x_pid_filter_ctrl,
.frontend_attach = stk807xpvr_frontend_attach0,
.tuner_attach = dib807x_tuner_attach,
@@ -2393,6 +2521,10 @@
sizeof(struct dib0700_adapter_state),
},
{
+ .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+ .pid_filter_count = 32,
+ .pid_filter = stk807x_pid_filter,
+ .pid_filter_ctrl = stk807x_pid_filter_ctrl,
.frontend_attach = stk807xpvr_frontend_attach1,
.tuner_attach = dib807x_tuner_attach,
diff --git a/drivers/media/dvb/dvb-usb/dibusb-mb.c b/drivers/media/dvb/dvb-usb/dibusb-mb.c
index eeef50bf..5c0126d 100644
--- a/drivers/media/dvb/dvb-usb/dibusb-mb.c
+++ b/drivers/media/dvb/dvb-usb/dibusb-mb.c
@@ -242,7 +242,7 @@
{ &dibusb_dib3000mb_table[9], &dibusb_dib3000mb_table[11], NULL },
{ &dibusb_dib3000mb_table[10], &dibusb_dib3000mb_table[12], NULL },
},
- { "Unkown USB1.1 DVB-T device ???? please report the name to the author",
+ { "Unknown USB1.1 DVB-T device ???? please report the name to the author",
{ &dibusb_dib3000mb_table[13], NULL },
{ &dibusb_dib3000mb_table[14], NULL },
},
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-dvb.c b/drivers/media/dvb/dvb-usb/dvb-usb-dvb.c
index 8a7d87b..df1ec3e 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb-dvb.c
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-dvb.c
@@ -88,6 +88,7 @@
goto err;
}
adap->dvb_adap.priv = adap;
+ adap->dvb_adap.fe_ioctl_override = adap->props.fe_ioctl_override;
if (adap->dev->props.read_mac_address) {
if (adap->dev->props.read_mac_address(adap->dev,adap->dvb_adap.proposed_mac) == 0)
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
index a548c14..f1602d4 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
@@ -27,6 +27,7 @@
#define USB_VID_DIBCOM 0x10b8
#define USB_VID_DPOSH 0x1498
#define USB_VID_DVICO 0x0fe9
+#define USB_VID_E3C 0x18b4
#define USB_VID_ELGATO 0x0fd9
#define USB_VID_EMPIA 0xeb1a
#define USB_VID_GENPIX 0x09c0
@@ -61,6 +62,7 @@
#define USB_VID_XTENSIONS 0x1ae7
#define USB_VID_HUMAX_COEX 0x10b9
#define USB_VID_774 0x7a69
+#define USB_VID_EVOLUTEPC 0x1e59
/* Product IDs */
#define USB_PID_ADSTECH_USB2_COLD 0xa333
@@ -103,6 +105,11 @@
#define USB_PID_DIBCOM_STK7770P 0x1e80
#define USB_PID_DPOSH_M9206_COLD 0x9206
#define USB_PID_DPOSH_M9206_WARM 0xa090
+#define USB_PID_E3C_EC168 0x1689
+#define USB_PID_E3C_EC168_2 0xfffa
+#define USB_PID_E3C_EC168_3 0xfffb
+#define USB_PID_E3C_EC168_4 0x1001
+#define USB_PID_E3C_EC168_5 0x1002
#define USB_PID_UNIWILL_STK7700P 0x6003
#define USB_PID_GENIUS_TVGO_DVB_T03 0x4012
#define USB_PID_GRANDTEC_DVBT_USB_COLD 0x0fa0
@@ -115,6 +122,7 @@
#define USB_PID_KWORLD_395U_3 0xe395
#define USB_PID_KWORLD_MC810 0xc810
#define USB_PID_KWORLD_PC160_2T 0xc160
+#define USB_PID_KWORLD_PC160_T 0xc161
#define USB_PID_KWORLD_VSTREAM_COLD 0x17de
#define USB_PID_KWORLD_VSTREAM_WARM 0x17df
#define USB_PID_TERRATEC_CINERGY_T_USB_XE 0x0055
@@ -271,10 +279,13 @@
#define USB_PID_TELESTAR_STARSTICK_2 0x8000
#define USB_PID_MSI_DIGI_VOX_MINI_III 0x8807
#define USB_PID_SONY_PLAYTV 0x0003
+#define USB_PID_MYGICA_D689 0xd811
#define USB_PID_ELGATO_EYETV_DTT 0x0021
#define USB_PID_ELGATO_EYETV_DTT_Dlx 0x0020
#define USB_PID_DVB_T_USB_STICK_HIGH_SPEED_COLD 0x5000
#define USB_PID_DVB_T_USB_STICK_HIGH_SPEED_WARM 0x5001
#define USB_PID_FRIIO_WHITE 0x0001
+#define USB_PID_TVWAY_PLUS 0x0002
+#define USB_PID_SVEON_STV20 0xe39d
#endif
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-remote.c b/drivers/media/dvb/dvb-usb/dvb-usb-remote.c
index edde87c..6b5ded9 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb-remote.c
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-remote.c
@@ -259,7 +259,7 @@
*state = REMOTE_KEY_REPEAT;
break;
default:
- deb_err("unkown type of remote status: %d\n",keybuf[0]);
+ deb_err("unknown type of remote status: %d\n",keybuf[0]);
break;
}
return 0;
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb.h b/drivers/media/dvb/dvb-usb/dvb-usb.h
index fe2b87e..0143aef 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb.h
+++ b/drivers/media/dvb/dvb-usb/dvb-usb.h
@@ -162,6 +162,9 @@
struct usb_data_stream_properties stream;
int size_of_priv;
+
+ int (*fe_ioctl_override) (struct dvb_frontend *,
+ unsigned int, void *, unsigned int);
};
/**
diff --git a/drivers/media/dvb/dvb-usb/ec168.c b/drivers/media/dvb/dvb-usb/ec168.c
new file mode 100644
index 0000000..52f5d4f
--- /dev/null
+++ b/drivers/media/dvb/dvb-usb/ec168.c
@@ -0,0 +1,440 @@
+/*
+ * E3C EC168 DVB USB driver
+ *
+ * Copyright (C) 2009 Antti Palosaari <crope@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include "ec168.h"
+#include "ec100.h"
+#include "mxl5005s.h"
+
+/* debug */
+static int dvb_usb_ec168_debug;
+module_param_named(debug, dvb_usb_ec168_debug, int, 0644);
+MODULE_PARM_DESC(debug, "set debugging level" DVB_USB_DEBUG_STATUS);
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
+static struct ec100_config ec168_ec100_config;
+
+static int ec168_rw_udev(struct usb_device *udev, struct ec168_req *req)
+{
+ int ret;
+ unsigned int pipe;
+ u8 request, requesttype;
+ u8 buf[req->size];
+
+ switch (req->cmd) {
+ case DOWNLOAD_FIRMWARE:
+ case GPIO:
+ case WRITE_I2C:
+ case STREAMING_CTRL:
+ requesttype = (USB_TYPE_VENDOR | USB_DIR_OUT);
+ request = req->cmd;
+ break;
+ case READ_I2C:
+ requesttype = (USB_TYPE_VENDOR | USB_DIR_IN);
+ request = req->cmd;
+ break;
+ case GET_CONFIG:
+ requesttype = (USB_TYPE_VENDOR | USB_DIR_IN);
+ request = CONFIG;
+ break;
+ case SET_CONFIG:
+ requesttype = (USB_TYPE_VENDOR | USB_DIR_OUT);
+ request = CONFIG;
+ break;
+ case WRITE_DEMOD:
+ requesttype = (USB_TYPE_VENDOR | USB_DIR_OUT);
+ request = DEMOD_RW;
+ break;
+ case READ_DEMOD:
+ requesttype = (USB_TYPE_VENDOR | USB_DIR_IN);
+ request = DEMOD_RW;
+ break;
+ default:
+ err("unknown command:%02x", req->cmd);
+ ret = -EPERM;
+ goto error;
+ }
+
+ if (requesttype == (USB_TYPE_VENDOR | USB_DIR_OUT)) {
+ /* write */
+ memcpy(buf, req->data, req->size);
+ pipe = usb_sndctrlpipe(udev, 0);
+ } else {
+ /* read */
+ pipe = usb_rcvctrlpipe(udev, 0);
+ }
+
+ msleep(1); /* avoid I2C errors */
+
+ ret = usb_control_msg(udev, pipe, request, requesttype, req->value,
+ req->index, buf, sizeof(buf), EC168_USB_TIMEOUT);
+
+ ec168_debug_dump(request, requesttype, req->value, req->index, buf,
+ req->size, deb_xfer);
+
+ if (ret < 0)
+ goto error;
+ else
+ ret = 0;
+
+ /* read request, copy returned data to return buf */
+ if (!ret && requesttype == (USB_TYPE_VENDOR | USB_DIR_IN))
+ memcpy(req->data, buf, req->size);
+
+ return ret;
+error:
+ deb_info("%s: failed:%d\n", __func__, ret);
+ return ret;
+}
+
+static int ec168_ctrl_msg(struct dvb_usb_device *d, struct ec168_req *req)
+{
+ return ec168_rw_udev(d->udev, req);
+}
+
+/* I2C */
+static int ec168_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
+ int num)
+{
+ struct dvb_usb_device *d = i2c_get_adapdata(adap);
+ struct ec168_req req;
+ int i = 0;
+ int ret;
+
+ if (num > 2)
+ return -EINVAL;
+
+ if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
+ return -EAGAIN;
+
+ while (i < num) {
+ if (num > i + 1 && (msg[i+1].flags & I2C_M_RD)) {
+ if (msg[i].addr == ec168_ec100_config.demod_address) {
+ req.cmd = READ_DEMOD;
+ req.value = 0;
+ req.index = 0xff00 + msg[i].buf[0]; /* reg */
+ req.size = msg[i+1].len; /* bytes to read */
+ req.data = &msg[i+1].buf[0];
+ ret = ec168_ctrl_msg(d, &req);
+ i += 2;
+ } else {
+ err("I2C read not implemented");
+ ret = -ENOSYS;
+ i += 2;
+ }
+ } else {
+ if (msg[i].addr == ec168_ec100_config.demod_address) {
+ req.cmd = WRITE_DEMOD;
+ req.value = msg[i].buf[1]; /* val */
+ req.index = 0xff00 + msg[i].buf[0]; /* reg */
+ req.size = 0;
+ req.data = NULL;
+ ret = ec168_ctrl_msg(d, &req);
+ i += 1;
+ } else {
+ req.cmd = WRITE_I2C;
+ req.value = msg[i].buf[0]; /* val */
+ req.index = 0x0100 + msg[i].addr; /* I2C addr */
+ req.size = msg[i].len-1;
+ req.data = &msg[i].buf[1];
+ ret = ec168_ctrl_msg(d, &req);
+ i += 1;
+ }
+ }
+ if (ret)
+ goto error;
+
+ }
+ ret = i;
+
+error:
+ mutex_unlock(&d->i2c_mutex);
+ return i;
+}
+
+
+static u32 ec168_i2c_func(struct i2c_adapter *adapter)
+{
+ return I2C_FUNC_I2C;
+}
+
+static struct i2c_algorithm ec168_i2c_algo = {
+ .master_xfer = ec168_i2c_xfer,
+ .functionality = ec168_i2c_func,
+};
+
+/* Callbacks for DVB USB */
+static struct ec100_config ec168_ec100_config = {
+ .demod_address = 0xff, /* not real address, demod is integrated */
+};
+
+static int ec168_ec100_frontend_attach(struct dvb_usb_adapter *adap)
+{
+ deb_info("%s:\n", __func__);
+ adap->fe = dvb_attach(ec100_attach, &ec168_ec100_config,
+ &adap->dev->i2c_adap);
+ if (adap->fe == NULL)
+ return -ENODEV;
+
+ return 0;
+}
+
+static struct mxl5005s_config ec168_mxl5003s_config = {
+ .i2c_address = 0xc6,
+ .if_freq = IF_FREQ_4570000HZ,
+ .xtal_freq = CRYSTAL_FREQ_16000000HZ,
+ .agc_mode = MXL_SINGLE_AGC,
+ .tracking_filter = MXL_TF_OFF,
+ .rssi_enable = MXL_RSSI_ENABLE,
+ .cap_select = MXL_CAP_SEL_ENABLE,
+ .div_out = MXL_DIV_OUT_4,
+ .clock_out = MXL_CLOCK_OUT_DISABLE,
+ .output_load = MXL5005S_IF_OUTPUT_LOAD_200_OHM,
+ .top = MXL5005S_TOP_25P2,
+ .mod_mode = MXL_DIGITAL_MODE,
+ .if_mode = MXL_ZERO_IF,
+ .AgcMasterByte = 0x00,
+};
+
+static int ec168_mxl5003s_tuner_attach(struct dvb_usb_adapter *adap)
+{
+ deb_info("%s:\n", __func__);
+ return dvb_attach(mxl5005s_attach, adap->fe, &adap->dev->i2c_adap,
+ &ec168_mxl5003s_config) == NULL ? -ENODEV : 0;
+}
+
+static int ec168_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
+{
+ struct ec168_req req = {STREAMING_CTRL, 0x7f01, 0x0202, 0, NULL};
+ deb_info("%s: onoff:%d\n", __func__, onoff);
+ if (onoff)
+ req.index = 0x0102;
+ return ec168_ctrl_msg(adap->dev, &req);
+}
+
+static int ec168_download_firmware(struct usb_device *udev,
+ const struct firmware *fw)
+{
+ int i, len, packets, remainder, ret;
+ u16 addr = 0x0000; /* firmware start address */
+ struct ec168_req req = {DOWNLOAD_FIRMWARE, 0, 0, 0, NULL};
+ deb_info("%s:\n", __func__);
+
+ #define FW_PACKET_MAX_DATA 2048
+ packets = fw->size / FW_PACKET_MAX_DATA;
+ remainder = fw->size % FW_PACKET_MAX_DATA;
+ len = FW_PACKET_MAX_DATA;
+ for (i = 0; i <= packets; i++) {
+ if (i == packets) /* set size of the last packet */
+ len = remainder;
+
+ req.size = len;
+ req.data = (u8 *)(fw->data + i * FW_PACKET_MAX_DATA);
+ req.index = addr;
+ addr += FW_PACKET_MAX_DATA;
+
+ ret = ec168_rw_udev(udev, &req);
+ if (ret) {
+ err("firmware download failed:%d packet:%d", ret, i);
+ goto error;
+ }
+ }
+ req.size = 0;
+
+ /* set "warm"? */
+ req.cmd = SET_CONFIG;
+ req.value = 0;
+ req.index = 0x0001;
+ ret = ec168_rw_udev(udev, &req);
+ if (ret)
+ goto error;
+
+ /* really needed - no idea what does */
+ req.cmd = GPIO;
+ req.value = 0;
+ req.index = 0x0206;
+ ret = ec168_rw_udev(udev, &req);
+ if (ret)
+ goto error;
+
+ /* activate tuner I2C? */
+ req.cmd = WRITE_I2C;
+ req.value = 0;
+ req.index = 0x00c6;
+ ret = ec168_rw_udev(udev, &req);
+ if (ret)
+ goto error;
+
+ return ret;
+error:
+ deb_info("%s: failed:%d\n", __func__, ret);
+ return ret;
+}
+
+static int ec168_identify_state(struct usb_device *udev,
+ struct dvb_usb_device_properties *props,
+ struct dvb_usb_device_description **desc, int *cold)
+{
+ int ret;
+ u8 reply;
+ struct ec168_req req = {GET_CONFIG, 0, 1, sizeof(reply), &reply};
+ deb_info("%s:\n", __func__);
+
+ ret = ec168_rw_udev(udev, &req);
+ if (ret)
+ goto error;
+
+ deb_info("%s: reply:%02x\n", __func__, reply);
+
+ if (reply == 0x01)
+ *cold = 0;
+ else
+ *cold = 1;
+
+ return ret;
+error:
+ deb_info("%s: failed:%d\n", __func__, ret);
+ return ret;
+}
+
+/* DVB USB Driver stuff */
+static struct dvb_usb_device_properties ec168_properties;
+
+static int ec168_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ int ret;
+ deb_info("%s: interface:%d\n", __func__,
+ intf->cur_altsetting->desc.bInterfaceNumber);
+
+ ret = dvb_usb_device_init(intf, &ec168_properties, THIS_MODULE, NULL,
+ adapter_nr);
+ if (ret)
+ goto error;
+
+ return ret;
+error:
+ deb_info("%s: failed:%d\n", __func__, ret);
+ return ret;
+}
+
+#define E3C_EC168_1689 0
+#define E3C_EC168_FFFA 1
+#define E3C_EC168_FFFB 2
+#define E3C_EC168_1001 3
+#define E3C_EC168_1002 4
+
+static struct usb_device_id ec168_id[] = {
+ [E3C_EC168_1689] =
+ {USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168)},
+ [E3C_EC168_FFFA] =
+ {USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168_2)},
+ [E3C_EC168_FFFB] =
+ {USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168_3)},
+ [E3C_EC168_1001] =
+ {USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168_4)},
+ [E3C_EC168_1002] =
+ {USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168_5)},
+ {} /* terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, ec168_id);
+
+static struct dvb_usb_device_properties ec168_properties = {
+ .caps = DVB_USB_IS_AN_I2C_ADAPTER,
+
+ .usb_ctrl = DEVICE_SPECIFIC,
+ .download_firmware = ec168_download_firmware,
+ .firmware = "dvb-usb-ec168.fw",
+ .no_reconnect = 1,
+
+ .size_of_priv = 0,
+
+ .num_adapters = 1,
+ .adapter = {
+ {
+ .streaming_ctrl = ec168_streaming_ctrl,
+ .frontend_attach = ec168_ec100_frontend_attach,
+ .tuner_attach = ec168_mxl5003s_tuner_attach,
+ .stream = {
+ .type = USB_BULK,
+ .count = 6,
+ .endpoint = 0x82,
+ .u = {
+ .bulk = {
+ .buffersize = (32*512),
+ }
+ }
+ },
+ }
+ },
+
+ .identify_state = ec168_identify_state,
+
+ .i2c_algo = &ec168_i2c_algo,
+
+ .num_device_descs = 1,
+ .devices = {
+ {
+ .name = "E3C EC168 DVB-T USB2.0 reference design",
+ .cold_ids = {
+ &ec168_id[E3C_EC168_1689],
+ &ec168_id[E3C_EC168_FFFA],
+ &ec168_id[E3C_EC168_FFFB],
+ &ec168_id[E3C_EC168_1001],
+ &ec168_id[E3C_EC168_1002],
+ NULL},
+ .warm_ids = {NULL},
+ },
+ }
+};
+
+static struct usb_driver ec168_driver = {
+ .name = "dvb_usb_ec168",
+ .probe = ec168_probe,
+ .disconnect = dvb_usb_device_exit,
+ .id_table = ec168_id,
+};
+
+/* module stuff */
+static int __init ec168_module_init(void)
+{
+ int ret;
+ deb_info("%s:\n", __func__);
+ ret = usb_register(&ec168_driver);
+ if (ret)
+ err("module init failed:%d", ret);
+
+ return ret;
+}
+
+static void __exit ec168_module_exit(void)
+{
+ deb_info("%s:\n", __func__);
+ /* deregister this driver from the USB subsystem */
+ usb_deregister(&ec168_driver);
+}
+
+module_init(ec168_module_init);
+module_exit(ec168_module_exit);
+
+MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
+MODULE_DESCRIPTION("E3C EC168 DVB-T USB2.0 driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/dvb-usb/ec168.h b/drivers/media/dvb/dvb-usb/ec168.h
new file mode 100644
index 0000000..e7e0b83
--- /dev/null
+++ b/drivers/media/dvb/dvb-usb/ec168.h
@@ -0,0 +1,73 @@
+/*
+ * E3C EC168 DVB USB driver
+ *
+ * Copyright (C) 2009 Antti Palosaari <crope@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#ifndef EC168_H
+#define EC168_H
+
+#define DVB_USB_LOG_PREFIX "ec168"
+#include "dvb-usb.h"
+
+#define deb_info(args...) dprintk(dvb_usb_ec168_debug, 0x01, args)
+#define deb_rc(args...) dprintk(dvb_usb_ec168_debug, 0x02, args)
+#define deb_xfer(args...) dprintk(dvb_usb_ec168_debug, 0x04, args)
+#define deb_reg(args...) dprintk(dvb_usb_ec168_debug, 0x08, args)
+#define deb_i2c(args...) dprintk(dvb_usb_ec168_debug, 0x10, args)
+#define deb_fw(args...) dprintk(dvb_usb_ec168_debug, 0x20, args)
+
+#define ec168_debug_dump(r, t, v, i, b, l, func) { \
+ int loop_; \
+ func("%02x %02x %02x %02x %02x %02x %02x %02x", \
+ t, r, v & 0xff, v >> 8, i & 0xff, i >> 8, l & 0xff, l >> 8); \
+ if (t == (USB_TYPE_VENDOR | USB_DIR_OUT)) \
+ func(" >>> "); \
+ else \
+ func(" <<< "); \
+ for (loop_ = 0; loop_ < l; loop_++) \
+ func("%02x ", b[loop_]); \
+ func("\n");\
+}
+
+#define EC168_USB_TIMEOUT 1000
+
+struct ec168_req {
+ u8 cmd; /* [1] */
+ u16 value; /* [2|3] */
+ u16 index; /* [4|5] */
+ u16 size; /* [6|7] */
+ u8 *data;
+};
+
+enum ec168_cmd {
+ DOWNLOAD_FIRMWARE = 0x00,
+ CONFIG = 0x01,
+ DEMOD_RW = 0x03,
+ GPIO = 0x04,
+ STREAMING_CTRL = 0x10,
+ READ_I2C = 0x20,
+ WRITE_I2C = 0x21,
+ HID_DOWNLOAD = 0x30,
+ GET_CONFIG,
+ SET_CONFIG,
+ READ_DEMOD,
+ WRITE_DEMOD,
+};
+
+#endif
diff --git a/drivers/media/dvb/dvb-usb/friio-fe.c b/drivers/media/dvb/dvb-usb/friio-fe.c
index c4dfe25..9cbbe42 100644
--- a/drivers/media/dvb/dvb-usb/friio-fe.c
+++ b/drivers/media/dvb/dvb-usb/friio-fe.c
@@ -232,12 +232,6 @@
return 0;
}
-static int jdvbt90502_read_ber(struct dvb_frontend *fe, u32 *ber)
-{
- *ber = 0;
- return 0;
-}
-
static int jdvbt90502_read_signal_strength(struct dvb_frontend *fe,
u16 *strength)
{
@@ -264,26 +258,26 @@
return 0;
}
-static int jdvbt90502_read_snr(struct dvb_frontend *fe, u16 *snr)
-{
- *snr = 0x0101;
- return 0;
-}
-static int jdvbt90502_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
+/* filter out un-supported properties to notify users */
+static int jdvbt90502_set_property(struct dvb_frontend *fe,
+ struct dtv_property *tvp)
{
- *ucblocks = 0;
- return 0;
-}
+ int r = 0;
-static int jdvbt90502_get_tune_settings(struct dvb_frontend *fe,
- struct dvb_frontend_tune_settings *fs)
-{
- fs->min_delay_ms = 500;
- fs->step_size = 0;
- fs->max_drift = 0;
-
- return 0;
+ switch (tvp->cmd) {
+ case DTV_DELIVERY_SYSTEM:
+ if (tvp->u.data != SYS_ISDBT)
+ r = -EINVAL;
+ break;
+ case DTV_CLEAR:
+ case DTV_TUNE:
+ case DTV_FREQUENCY:
+ break;
+ default:
+ r = -EINVAL;
+ }
+ return r;
}
static int jdvbt90502_get_frontend(struct dvb_frontend *fe,
@@ -314,6 +308,9 @@
deb_fe("%s: Freq:%d\n", __func__, p->frequency);
+ /* for recovery from DTV_CLEAN */
+ fe->dtv_property_cache.delivery_system = SYS_ISDBT;
+
ret = jdvbt90502_pll_set_freq(state, p->frequency);
if (ret) {
deb_fe("%s:ret == %d\n", __func__, ret);
@@ -323,12 +320,6 @@
return 0;
}
-static int jdvbt90502_sleep(struct dvb_frontend *fe)
-{
- deb_fe("%s called.\n", __func__);
- return 0;
-}
-
/**
* (reg, val) commad list to initialize this module.
@@ -394,6 +385,7 @@
if (ret != 1)
goto error;
}
+ fe->dtv_property_cache.delivery_system = SYS_ISDBT;
msleep(100);
return 0;
@@ -468,16 +460,13 @@
.release = jdvbt90502_release,
.init = jdvbt90502_init,
- .sleep = jdvbt90502_sleep,
.write = _jdvbt90502_write,
+ .set_property = jdvbt90502_set_property,
+
.set_frontend = jdvbt90502_set_frontend,
.get_frontend = jdvbt90502_get_frontend,
- .get_tune_settings = jdvbt90502_get_tune_settings,
.read_status = jdvbt90502_read_status,
- .read_ber = jdvbt90502_read_ber,
.read_signal_strength = jdvbt90502_read_signal_strength,
- .read_snr = jdvbt90502_read_snr,
- .read_ucblocks = jdvbt90502_read_ucblocks,
};
diff --git a/drivers/media/dvb/dvb-usb/usb-urb.c b/drivers/media/dvb/dvb-usb/usb-urb.c
index 9da2cc9..f9702e3 100644
--- a/drivers/media/dvb/dvb-usb/usb-urb.c
+++ b/drivers/media/dvb/dvb-usb/usb-urb.c
@@ -56,7 +56,7 @@
stream->complete(stream, b, urb->actual_length);
break;
default:
- err("unkown endpoint type in completition handler.");
+ err("unknown endpoint type in completition handler.");
return;
}
usb_submit_urb(urb,GFP_ATOMIC);
@@ -228,7 +228,7 @@
case USB_ISOC:
return usb_isoc_urb_init(stream);
default:
- err("unkown URB-type for data transfer.");
+ err("unknown URB-type for data transfer.");
return -EINVAL;
}
}
diff --git a/drivers/media/dvb/firewire/Kconfig b/drivers/media/dvb/firewire/Kconfig
index 6902825..4afa292 100644
--- a/drivers/media/dvb/firewire/Kconfig
+++ b/drivers/media/dvb/firewire/Kconfig
@@ -1,6 +1,6 @@
config DVB_FIREDTV
tristate "FireDTV and FloppyDTV"
- depends on DVB_CORE && IEEE1394
+ depends on DVB_CORE && (FIREWIRE || IEEE1394)
help
Support for DVB receivers from Digital Everywhere
which are connected via IEEE 1394 (FireWire).
@@ -13,8 +13,11 @@
if DVB_FIREDTV
+config DVB_FIREDTV_FIREWIRE
+ def_bool FIREWIRE = y || (FIREWIRE = m && DVB_FIREDTV = m)
+
config DVB_FIREDTV_IEEE1394
- def_bool IEEE1394
+ def_bool IEEE1394 = y || (IEEE1394 = m && DVB_FIREDTV = m)
config DVB_FIREDTV_INPUT
def_bool INPUT = y || (INPUT = m && DVB_FIREDTV = m)
diff --git a/drivers/media/dvb/firewire/Makefile b/drivers/media/dvb/firewire/Makefile
index 2034695..da84203 100644
--- a/drivers/media/dvb/firewire/Makefile
+++ b/drivers/media/dvb/firewire/Makefile
@@ -1,6 +1,7 @@
obj-$(CONFIG_DVB_FIREDTV) += firedtv.o
firedtv-y := firedtv-avc.o firedtv-ci.o firedtv-dvb.o firedtv-fe.o
+firedtv-$(CONFIG_DVB_FIREDTV_FIREWIRE) += firedtv-fw.o
firedtv-$(CONFIG_DVB_FIREDTV_IEEE1394) += firedtv-1394.o
firedtv-$(CONFIG_DVB_FIREDTV_INPUT) += firedtv-rc.o
diff --git a/drivers/media/dvb/firewire/firedtv-1394.c b/drivers/media/dvb/firewire/firedtv-1394.c
index 2b6eeea..7c5459c2 100644
--- a/drivers/media/dvb/firewire/firedtv-1394.c
+++ b/drivers/media/dvb/firewire/firedtv-1394.c
@@ -1,5 +1,5 @@
/*
- * FireDTV driver (formerly known as FireSAT)
+ * FireDTV driver -- ieee1394 I/O backend
*
* Copyright (C) 2004 Andreas Monitzer <andy@monitzer.com>
* Copyright (C) 2007-2008 Ben Backx <ben@bbackx.com>
@@ -26,13 +26,16 @@
#include <iso.h>
#include <nodemgr.h>
+#include <dvb_demux.h>
+
#include "firedtv.h"
static LIST_HEAD(node_list);
static DEFINE_SPINLOCK(node_list_lock);
-#define FIREWIRE_HEADER_SIZE 4
-#define CIP_HEADER_SIZE 8
+#define CIP_HEADER_SIZE 8
+#define MPEG2_TS_HEADER_SIZE 4
+#define MPEG2_TS_SOURCE_PACKET_SIZE (4 + 188)
static void rawiso_activity_cb(struct hpsb_iso *iso)
{
@@ -62,20 +65,20 @@
buf = dma_region_i(&iso->data_buf, unsigned char,
iso->infos[packet].offset + CIP_HEADER_SIZE);
count = (iso->infos[packet].len - CIP_HEADER_SIZE) /
- (188 + FIREWIRE_HEADER_SIZE);
+ MPEG2_TS_SOURCE_PACKET_SIZE;
/* ignore empty packet */
if (iso->infos[packet].len <= CIP_HEADER_SIZE)
continue;
while (count--) {
- if (buf[FIREWIRE_HEADER_SIZE] == 0x47)
+ if (buf[MPEG2_TS_HEADER_SIZE] == 0x47)
dvb_dmx_swfilter_packets(&fdtv->demux,
- &buf[FIREWIRE_HEADER_SIZE], 1);
+ &buf[MPEG2_TS_HEADER_SIZE], 1);
else
dev_err(fdtv->device,
"skipping invalid packet\n");
- buf += 188 + FIREWIRE_HEADER_SIZE;
+ buf += MPEG2_TS_SOURCE_PACKET_SIZE;
}
}
out:
@@ -87,15 +90,20 @@
return container_of(fdtv->device, struct unit_directory, device)->ne;
}
-static int node_lock(struct firedtv *fdtv, u64 addr, void *data, __be32 arg)
+static int node_lock(struct firedtv *fdtv, u64 addr, __be32 data[])
{
- return hpsb_node_lock(node_of(fdtv), addr, EXTCODE_COMPARE_SWAP, data,
- (__force quadlet_t)arg);
+ int ret;
+
+ ret = hpsb_node_lock(node_of(fdtv), addr, EXTCODE_COMPARE_SWAP,
+ (__force quadlet_t *)&data[1], (__force quadlet_t)data[0]);
+ data[0] = data[1];
+
+ return ret;
}
-static int node_read(struct firedtv *fdtv, u64 addr, void *data, size_t len)
+static int node_read(struct firedtv *fdtv, u64 addr, void *data)
{
- return hpsb_node_read(node_of(fdtv), addr, data, len);
+ return hpsb_node_read(node_of(fdtv), addr, data, 4);
}
static int node_write(struct firedtv *fdtv, u64 addr, void *data, size_t len)
@@ -212,6 +220,7 @@
goto fail;
avc_register_remote_control(fdtv);
+
return 0;
fail:
spin_lock_irq(&node_list_lock);
@@ -220,6 +229,7 @@
fdtv_unregister_rc(fdtv);
fail_free:
kfree(fdtv);
+
return err;
}
@@ -233,10 +243,9 @@
list_del(&fdtv->list);
spin_unlock_irq(&node_list_lock);
- cancel_work_sync(&fdtv->remote_ctrl_work);
fdtv_unregister_rc(fdtv);
-
kfree(fdtv);
+
return 0;
}
@@ -252,6 +261,7 @@
static struct hpsb_protocol_driver fdtv_driver = {
.name = "firedtv",
+ .id_table = fdtv_id_table,
.update = node_update,
.driver = {
.probe = node_probe,
@@ -264,12 +274,11 @@
.fcp_request = fcp_request,
};
-int __init fdtv_1394_init(struct ieee1394_device_id id_table[])
+int __init fdtv_1394_init(void)
{
int ret;
hpsb_register_highlevel(&fdtv_highlevel);
- fdtv_driver.id_table = id_table;
ret = hpsb_register_protocol(&fdtv_driver);
if (ret) {
printk(KERN_ERR "firedtv: failed to register protocol\n");
diff --git a/drivers/media/dvb/firewire/firedtv-avc.c b/drivers/media/dvb/firewire/firedtv-avc.c
index 485d061..50c42a4 100644
--- a/drivers/media/dvb/firewire/firedtv-avc.c
+++ b/drivers/media/dvb/firewire/firedtv-avc.c
@@ -1236,14 +1236,14 @@
#define CMP_OUTPUT_PLUG_CONTROL_REG_0 0xfffff0000904ULL
-static int cmp_read(struct firedtv *fdtv, void *buf, u64 addr, size_t len)
+static int cmp_read(struct firedtv *fdtv, u64 addr, __be32 *data)
{
int ret;
if (mutex_lock_interruptible(&fdtv->avc_mutex))
return -EINTR;
- ret = fdtv->backend->read(fdtv, addr, buf, len);
+ ret = fdtv->backend->read(fdtv, addr, data);
if (ret < 0)
dev_err(fdtv->device, "CMP: read I/O error\n");
@@ -1251,14 +1251,14 @@
return ret;
}
-static int cmp_lock(struct firedtv *fdtv, void *data, u64 addr, __be32 arg)
+static int cmp_lock(struct firedtv *fdtv, u64 addr, __be32 data[])
{
int ret;
if (mutex_lock_interruptible(&fdtv->avc_mutex))
return -EINTR;
- ret = fdtv->backend->lock(fdtv, addr, data, arg);
+ ret = fdtv->backend->lock(fdtv, addr, data);
if (ret < 0)
dev_err(fdtv->device, "CMP: lock I/O error\n");
@@ -1288,25 +1288,25 @@
int cmp_establish_pp_connection(struct firedtv *fdtv, int plug, int channel)
{
- __be32 old_opcr, opcr;
+ __be32 old_opcr, opcr[2];
u64 opcr_address = CMP_OUTPUT_PLUG_CONTROL_REG_0 + (plug << 2);
int attempts = 0;
int ret;
- ret = cmp_read(fdtv, &opcr, opcr_address, 4);
+ ret = cmp_read(fdtv, opcr_address, opcr);
if (ret < 0)
return ret;
repeat:
- if (!get_opcr_online(opcr)) {
+ if (!get_opcr_online(*opcr)) {
dev_err(fdtv->device, "CMP: output offline\n");
return -EBUSY;
}
- old_opcr = opcr;
+ old_opcr = *opcr;
- if (get_opcr_p2p_connections(opcr)) {
- if (get_opcr_channel(opcr) != channel) {
+ if (get_opcr_p2p_connections(*opcr)) {
+ if (get_opcr_channel(*opcr) != channel) {
dev_err(fdtv->device, "CMP: cannot change channel\n");
return -EBUSY;
}
@@ -1314,11 +1314,11 @@
/* We don't allocate isochronous resources. */
} else {
- set_opcr_channel(&opcr, channel);
- set_opcr_data_rate(&opcr, 2); /* S400 */
+ set_opcr_channel(opcr, channel);
+ set_opcr_data_rate(opcr, 2); /* S400 */
/* FIXME: this is for the worst case - optimize */
- set_opcr_overhead_id(&opcr, 0);
+ set_opcr_overhead_id(opcr, 0);
/*
* FIXME: allocate isochronous channel and bandwidth at IRM
@@ -1326,13 +1326,16 @@
*/
}
- set_opcr_p2p_connections(&opcr, get_opcr_p2p_connections(opcr) + 1);
+ set_opcr_p2p_connections(opcr, get_opcr_p2p_connections(*opcr) + 1);
- ret = cmp_lock(fdtv, &opcr, opcr_address, old_opcr);
+ opcr[1] = *opcr;
+ opcr[0] = old_opcr;
+
+ ret = cmp_lock(fdtv, opcr_address, opcr);
if (ret < 0)
return ret;
- if (old_opcr != opcr) {
+ if (old_opcr != *opcr) {
/*
* FIXME: if old_opcr.P2P_Connections > 0,
* deallocate isochronous channel and bandwidth at IRM
@@ -1350,27 +1353,30 @@
void cmp_break_pp_connection(struct firedtv *fdtv, int plug, int channel)
{
- __be32 old_opcr, opcr;
+ __be32 old_opcr, opcr[2];
u64 opcr_address = CMP_OUTPUT_PLUG_CONTROL_REG_0 + (plug << 2);
int attempts = 0;
- if (cmp_read(fdtv, &opcr, opcr_address, 4) < 0)
+ if (cmp_read(fdtv, opcr_address, opcr) < 0)
return;
repeat:
- if (!get_opcr_online(opcr) || !get_opcr_p2p_connections(opcr) ||
- get_opcr_channel(opcr) != channel) {
+ if (!get_opcr_online(*opcr) || !get_opcr_p2p_connections(*opcr) ||
+ get_opcr_channel(*opcr) != channel) {
dev_err(fdtv->device, "CMP: no connection to break\n");
return;
}
- old_opcr = opcr;
- set_opcr_p2p_connections(&opcr, get_opcr_p2p_connections(opcr) - 1);
+ old_opcr = *opcr;
+ set_opcr_p2p_connections(opcr, get_opcr_p2p_connections(*opcr) - 1);
- if (cmp_lock(fdtv, &opcr, opcr_address, old_opcr) < 0)
+ opcr[1] = *opcr;
+ opcr[0] = old_opcr;
+
+ if (cmp_lock(fdtv, opcr_address, opcr) < 0)
return;
- if (old_opcr != opcr) {
+ if (old_opcr != *opcr) {
/*
* FIXME: if old_opcr.P2P_Connections == 1, i.e. we were last
* owner, deallocate isochronous channel and bandwidth at IRM
diff --git a/drivers/media/dvb/firewire/firedtv-dvb.c b/drivers/media/dvb/firewire/firedtv-dvb.c
index 5742fde..fc9996c 100644
--- a/drivers/media/dvb/firewire/firedtv-dvb.c
+++ b/drivers/media/dvb/firewire/firedtv-dvb.c
@@ -297,7 +297,7 @@
#define AVC_UNIT_SPEC_ID_ENTRY 0x00a02d
#define AVC_SW_VERSION_ENTRY 0x010001
-static struct ieee1394_device_id fdtv_id_table[] = {
+const struct ieee1394_device_id fdtv_id_table[] = {
{
/* FloppyDTV S/CI and FloppyDTV S2 */
.match_flags = MATCH_FLAGS,
@@ -346,12 +346,23 @@
static int __init fdtv_init(void)
{
- return fdtv_1394_init(fdtv_id_table);
+ int ret;
+
+ ret = fdtv_fw_init();
+ if (ret < 0)
+ return ret;
+
+ ret = fdtv_1394_init();
+ if (ret < 0)
+ fdtv_fw_exit();
+
+ return ret;
}
static void __exit fdtv_exit(void)
{
fdtv_1394_exit();
+ fdtv_fw_exit();
}
module_init(fdtv_init);
diff --git a/drivers/media/dvb/firewire/firedtv-fw.c b/drivers/media/dvb/firewire/firedtv-fw.c
new file mode 100644
index 0000000..fe44789
--- /dev/null
+++ b/drivers/media/dvb/firewire/firedtv-fw.c
@@ -0,0 +1,376 @@
+/*
+ * FireDTV driver -- firewire I/O backend
+ */
+
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/firewire.h>
+#include <linux/firewire-constants.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+
+#include <asm/page.h>
+
+#include <dvb_demux.h>
+
+#include "firedtv.h"
+
+static LIST_HEAD(node_list);
+static DEFINE_SPINLOCK(node_list_lock);
+
+static inline struct fw_device *device_of(struct firedtv *fdtv)
+{
+ return fw_device(fdtv->device->parent);
+}
+
+static int node_req(struct firedtv *fdtv, u64 addr, void *data, size_t len,
+ int tcode)
+{
+ struct fw_device *device = device_of(fdtv);
+ int rcode, generation = device->generation;
+
+ smp_rmb(); /* node_id vs. generation */
+
+ rcode = fw_run_transaction(device->card, tcode, device->node_id,
+ generation, device->max_speed, addr, data, len);
+
+ return rcode != RCODE_COMPLETE ? -EIO : 0;
+}
+
+static int node_lock(struct firedtv *fdtv, u64 addr, __be32 data[])
+{
+ return node_req(fdtv, addr, data, 8, TCODE_LOCK_COMPARE_SWAP);
+}
+
+static int node_read(struct firedtv *fdtv, u64 addr, void *data)
+{
+ return node_req(fdtv, addr, data, 4, TCODE_READ_QUADLET_REQUEST);
+}
+
+static int node_write(struct firedtv *fdtv, u64 addr, void *data, size_t len)
+{
+ return node_req(fdtv, addr, data, len, TCODE_WRITE_BLOCK_REQUEST);
+}
+
+#define ISO_HEADER_SIZE 4
+#define CIP_HEADER_SIZE 8
+#define MPEG2_TS_HEADER_SIZE 4
+#define MPEG2_TS_SOURCE_PACKET_SIZE (4 + 188)
+
+#define MAX_PACKET_SIZE 1024 /* 776, rounded up to 2^n */
+#define PACKETS_PER_PAGE (PAGE_SIZE / MAX_PACKET_SIZE)
+#define N_PACKETS 64 /* buffer size */
+#define N_PAGES DIV_ROUND_UP(N_PACKETS, PACKETS_PER_PAGE)
+#define IRQ_INTERVAL 16
+
+struct firedtv_receive_context {
+ struct fw_iso_context *context;
+ struct fw_iso_buffer buffer;
+ int interrupt_packet;
+ int current_packet;
+ char *pages[N_PAGES];
+};
+
+static int queue_iso(struct firedtv_receive_context *ctx, int index)
+{
+ struct fw_iso_packet p;
+
+ p.payload_length = MAX_PACKET_SIZE;
+ p.interrupt = !(++ctx->interrupt_packet & (IRQ_INTERVAL - 1));
+ p.skip = 0;
+ p.header_length = ISO_HEADER_SIZE;
+
+ return fw_iso_context_queue(ctx->context, &p, &ctx->buffer,
+ index * MAX_PACKET_SIZE);
+}
+
+static void handle_iso(struct fw_iso_context *context, u32 cycle,
+ size_t header_length, void *header, void *data)
+{
+ struct firedtv *fdtv = data;
+ struct firedtv_receive_context *ctx = fdtv->backend_data;
+ __be32 *h, *h_end;
+ int length, err, i = ctx->current_packet;
+ char *p, *p_end;
+
+ for (h = header, h_end = h + header_length / 4; h < h_end; h++) {
+ length = be32_to_cpup(h) >> 16;
+ if (unlikely(length > MAX_PACKET_SIZE)) {
+ dev_err(fdtv->device, "length = %d\n", length);
+ length = MAX_PACKET_SIZE;
+ }
+
+ p = ctx->pages[i / PACKETS_PER_PAGE]
+ + (i % PACKETS_PER_PAGE) * MAX_PACKET_SIZE;
+ p_end = p + length;
+
+ for (p += CIP_HEADER_SIZE + MPEG2_TS_HEADER_SIZE; p < p_end;
+ p += MPEG2_TS_SOURCE_PACKET_SIZE)
+ dvb_dmx_swfilter_packets(&fdtv->demux, p, 1);
+
+ err = queue_iso(ctx, i);
+ if (unlikely(err))
+ dev_err(fdtv->device, "requeue failed\n");
+
+ i = (i + 1) & (N_PACKETS - 1);
+ }
+ ctx->current_packet = i;
+}
+
+static int start_iso(struct firedtv *fdtv)
+{
+ struct firedtv_receive_context *ctx;
+ struct fw_device *device = device_of(fdtv);
+ int i, err;
+
+ ctx = kmalloc(sizeof(*ctx), GFP_KERNEL);
+ if (!ctx)
+ return -ENOMEM;
+
+ ctx->context = fw_iso_context_create(device->card,
+ FW_ISO_CONTEXT_RECEIVE, fdtv->isochannel,
+ device->max_speed, ISO_HEADER_SIZE, handle_iso, fdtv);
+ if (IS_ERR(ctx->context)) {
+ err = PTR_ERR(ctx->context);
+ goto fail_free;
+ }
+
+ err = fw_iso_buffer_init(&ctx->buffer, device->card,
+ N_PAGES, DMA_FROM_DEVICE);
+ if (err)
+ goto fail_context_destroy;
+
+ ctx->interrupt_packet = 0;
+ ctx->current_packet = 0;
+
+ for (i = 0; i < N_PAGES; i++)
+ ctx->pages[i] = page_address(ctx->buffer.pages[i]);
+
+ for (i = 0; i < N_PACKETS; i++) {
+ err = queue_iso(ctx, i);
+ if (err)
+ goto fail;
+ }
+
+ err = fw_iso_context_start(ctx->context, -1, 0,
+ FW_ISO_CONTEXT_MATCH_ALL_TAGS);
+ if (err)
+ goto fail;
+
+ fdtv->backend_data = ctx;
+
+ return 0;
+fail:
+ fw_iso_buffer_destroy(&ctx->buffer, device->card);
+fail_context_destroy:
+ fw_iso_context_destroy(ctx->context);
+fail_free:
+ kfree(ctx);
+
+ return err;
+}
+
+static void stop_iso(struct firedtv *fdtv)
+{
+ struct firedtv_receive_context *ctx = fdtv->backend_data;
+
+ fw_iso_context_stop(ctx->context);
+ fw_iso_buffer_destroy(&ctx->buffer, device_of(fdtv)->card);
+ fw_iso_context_destroy(ctx->context);
+ kfree(ctx);
+}
+
+static const struct firedtv_backend backend = {
+ .lock = node_lock,
+ .read = node_read,
+ .write = node_write,
+ .start_iso = start_iso,
+ .stop_iso = stop_iso,
+};
+
+static void handle_fcp(struct fw_card *card, struct fw_request *request,
+ int tcode, int destination, int source, int generation,
+ int speed, unsigned long long offset,
+ void *payload, size_t length, void *callback_data)
+{
+ struct firedtv *f, *fdtv = NULL;
+ struct fw_device *device;
+ unsigned long flags;
+ int su;
+
+ if ((tcode != TCODE_WRITE_QUADLET_REQUEST &&
+ tcode != TCODE_WRITE_BLOCK_REQUEST) ||
+ offset != CSR_REGISTER_BASE + CSR_FCP_RESPONSE ||
+ length == 0 ||
+ (((u8 *)payload)[0] & 0xf0) != 0) {
+ fw_send_response(card, request, RCODE_TYPE_ERROR);
+ return;
+ }
+
+ su = ((u8 *)payload)[1] & 0x7;
+
+ spin_lock_irqsave(&node_list_lock, flags);
+ list_for_each_entry(f, &node_list, list) {
+ device = device_of(f);
+ if (device->generation != generation)
+ continue;
+
+ smp_rmb(); /* node_id vs. generation */
+
+ if (device->card == card &&
+ device->node_id == source &&
+ (f->subunit == su || (f->subunit == 0 && su == 0x7))) {
+ fdtv = f;
+ break;
+ }
+ }
+ spin_unlock_irqrestore(&node_list_lock, flags);
+
+ if (fdtv) {
+ avc_recv(fdtv, payload, length);
+ fw_send_response(card, request, RCODE_COMPLETE);
+ }
+}
+
+static struct fw_address_handler fcp_handler = {
+ .length = CSR_FCP_END - CSR_FCP_RESPONSE,
+ .address_callback = handle_fcp,
+};
+
+static const struct fw_address_region fcp_region = {
+ .start = CSR_REGISTER_BASE + CSR_FCP_RESPONSE,
+ .end = CSR_REGISTER_BASE + CSR_FCP_END,
+};
+
+/* Adjust the template string if models with longer names appear. */
+#define MAX_MODEL_NAME_LEN ((int)DIV_ROUND_UP(sizeof("FireDTV ????"), 4))
+
+static size_t model_name(u32 *directory, __be32 *buffer)
+{
+ struct fw_csr_iterator ci;
+ int i, length, key, value, last_key = 0;
+ u32 *block = NULL;
+
+ fw_csr_iterator_init(&ci, directory);
+ while (fw_csr_iterator_next(&ci, &key, &value)) {
+ if (last_key == CSR_MODEL &&
+ key == (CSR_DESCRIPTOR | CSR_LEAF))
+ block = ci.p - 1 + value;
+ last_key = key;
+ }
+
+ if (block == NULL)
+ return 0;
+
+ length = min((int)(block[0] >> 16) - 2, MAX_MODEL_NAME_LEN);
+ if (length <= 0)
+ return 0;
+
+ /* fast-forward to text string */
+ block += 3;
+
+ for (i = 0; i < length; i++)
+ buffer[i] = cpu_to_be32(block[i]);
+
+ return length * 4;
+}
+
+static int node_probe(struct device *dev)
+{
+ struct firedtv *fdtv;
+ __be32 name[MAX_MODEL_NAME_LEN];
+ int name_len, err;
+
+ name_len = model_name(fw_unit(dev)->directory, name);
+
+ fdtv = fdtv_alloc(dev, &backend, (char *)name, name_len);
+ if (!fdtv)
+ return -ENOMEM;
+
+ err = fdtv_register_rc(fdtv, dev);
+ if (err)
+ goto fail_free;
+
+ spin_lock_irq(&node_list_lock);
+ list_add_tail(&fdtv->list, &node_list);
+ spin_unlock_irq(&node_list_lock);
+
+ err = avc_identify_subunit(fdtv);
+ if (err)
+ goto fail;
+
+ err = fdtv_dvb_register(fdtv);
+ if (err)
+ goto fail;
+
+ avc_register_remote_control(fdtv);
+
+ return 0;
+fail:
+ spin_lock_irq(&node_list_lock);
+ list_del(&fdtv->list);
+ spin_unlock_irq(&node_list_lock);
+ fdtv_unregister_rc(fdtv);
+fail_free:
+ kfree(fdtv);
+
+ return err;
+}
+
+static int node_remove(struct device *dev)
+{
+ struct firedtv *fdtv = dev_get_drvdata(dev);
+
+ fdtv_dvb_unregister(fdtv);
+
+ spin_lock_irq(&node_list_lock);
+ list_del(&fdtv->list);
+ spin_unlock_irq(&node_list_lock);
+
+ fdtv_unregister_rc(fdtv);
+
+ kfree(fdtv);
+ return 0;
+}
+
+static void node_update(struct fw_unit *unit)
+{
+ struct firedtv *fdtv = dev_get_drvdata(&unit->device);
+
+ if (fdtv->isochannel >= 0)
+ cmp_establish_pp_connection(fdtv, fdtv->subunit,
+ fdtv->isochannel);
+}
+
+static struct fw_driver fdtv_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "firedtv",
+ .bus = &fw_bus_type,
+ .probe = node_probe,
+ .remove = node_remove,
+ },
+ .update = node_update,
+ .id_table = fdtv_id_table,
+};
+
+int __init fdtv_fw_init(void)
+{
+ int ret;
+
+ ret = fw_core_add_address_handler(&fcp_handler, &fcp_region);
+ if (ret < 0)
+ return ret;
+
+ return driver_register(&fdtv_driver.driver);
+}
+
+void fdtv_fw_exit(void)
+{
+ driver_unregister(&fdtv_driver.driver);
+ fw_core_remove_address_handler(&fcp_handler);
+}
diff --git a/drivers/media/dvb/firewire/firedtv-rc.c b/drivers/media/dvb/firewire/firedtv-rc.c
index 27bca2e..599d66e 100644
--- a/drivers/media/dvb/firewire/firedtv-rc.c
+++ b/drivers/media/dvb/firewire/firedtv-rc.c
@@ -14,6 +14,7 @@
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/types.h>
+#include <linux/workqueue.h>
#include "firedtv.h"
@@ -163,6 +164,7 @@
void fdtv_unregister_rc(struct firedtv *fdtv)
{
+ cancel_work_sync(&fdtv->remote_ctrl_work);
kfree(fdtv->remote_ctrl_dev->keycode);
input_unregister_device(fdtv->remote_ctrl_dev);
}
diff --git a/drivers/media/dvb/firewire/firedtv.h b/drivers/media/dvb/firewire/firedtv.h
index d48530b..35080db 100644
--- a/drivers/media/dvb/firewire/firedtv.h
+++ b/drivers/media/dvb/firewire/firedtv.h
@@ -16,6 +16,7 @@
#include <linux/dvb/dmx.h>
#include <linux/dvb/frontend.h>
#include <linux/list.h>
+#include <linux/mod_devicetable.h>
#include <linux/mutex.h>
#include <linux/spinlock_types.h>
#include <linux/types.h>
@@ -72,8 +73,8 @@
struct firedtv;
struct firedtv_backend {
- int (*lock)(struct firedtv *fdtv, u64 addr, void *data, __be32 arg);
- int (*read)(struct firedtv *fdtv, u64 addr, void *data, size_t len);
+ int (*lock)(struct firedtv *fdtv, u64 addr, __be32 data[]);
+ int (*read)(struct firedtv *fdtv, u64 addr, void *data);
int (*write)(struct firedtv *fdtv, u64 addr, void *data, size_t len);
int (*start_iso)(struct firedtv *fdtv);
void (*stop_iso)(struct firedtv *fdtv);
@@ -119,10 +120,10 @@
/* firedtv-1394.c */
#ifdef CONFIG_DVB_FIREDTV_IEEE1394
-int fdtv_1394_init(struct ieee1394_device_id id_table[]);
+int fdtv_1394_init(void);
void fdtv_1394_exit(void);
#else
-static inline int fdtv_1394_init(struct ieee1394_device_id it[]) { return 0; }
+static inline int fdtv_1394_init(void) { return 0; }
static inline void fdtv_1394_exit(void) {}
#endif
@@ -163,10 +164,20 @@
const struct firedtv_backend *backend,
const char *name, size_t name_len);
extern const char *fdtv_model_names[];
+extern const struct ieee1394_device_id fdtv_id_table[];
/* firedtv-fe.c */
void fdtv_frontend_init(struct firedtv *fdtv);
+/* firedtv-fw.c */
+#ifdef CONFIG_DVB_FIREDTV_FIREWIRE
+int fdtv_fw_init(void);
+void fdtv_fw_exit(void);
+#else
+static inline int fdtv_fw_init(void) { return 0; }
+static inline void fdtv_fw_exit(void) {}
+#endif
+
/* firedtv-rc.c */
#ifdef CONFIG_DVB_FIREDTV_INPUT
int fdtv_register_rc(struct firedtv *fdtv, struct device *dev);
diff --git a/drivers/media/dvb/frontends/Kconfig b/drivers/media/dvb/frontends/Kconfig
index d7c4837..58aac01 100644
--- a/drivers/media/dvb/frontends/Kconfig
+++ b/drivers/media/dvb/frontends/Kconfig
@@ -201,6 +201,13 @@
help
A DVB-S tuner module. Say Y when you want to support this frontend.
+config DVB_DS3000
+ tristate "Montage Tehnology DS3000 based"
+ depends on DVB_CORE && I2C
+ default m if DVB_FE_CUSTOMISE
+ help
+ A DVB-S/S2 tuner module. Say Y when you want to support this frontend.
+
comment "DVB-T (terrestrial) frontends"
depends on DVB_CORE
@@ -342,6 +349,13 @@
help
Say Y when you want to support this frontend.
+config DVB_EC100
+ tristate "E3C EC100"
+ depends on DVB_CORE && I2C
+ default m if DVB_FE_CUSTOMISE
+ help
+ Say Y when you want to support this frontend.
+
comment "DVB-C (cable) frontends"
depends on DVB_CORE
@@ -557,6 +571,13 @@
help
A DMB-TH tuner module. Say Y when you want to support this frontend.
+config DVB_ATBM8830
+ tristate "AltoBeam ATBM8830/8831 DMB-TH demodulator"
+ depends on DVB_CORE && I2C
+ default m if DVB_FE_CUSTOMISE
+ help
+ A DMB-TH tuner module. Say Y when you want to support this frontend.
+
comment "Tools to develop new frontends"
config DVB_DUMMY_FE
diff --git a/drivers/media/dvb/frontends/Makefile b/drivers/media/dvb/frontends/Makefile
index 3523767..8234825 100644
--- a/drivers/media/dvb/frontends/Makefile
+++ b/drivers/media/dvb/frontends/Makefile
@@ -64,6 +64,7 @@
obj-$(CONFIG_DVB_S5H1411) += s5h1411.o
obj-$(CONFIG_DVB_LGS8GL5) += lgs8gl5.o
obj-$(CONFIG_DVB_LGS8GXX) += lgs8gxx.o
+obj-$(CONFIG_DVB_ATBM8830) += atbm8830.o
obj-$(CONFIG_DVB_DUMMY_FE) += dvb_dummy_fe.o
obj-$(CONFIG_DVB_AF9013) += af9013.o
obj-$(CONFIG_DVB_CX24116) += cx24116.o
@@ -76,3 +77,5 @@
obj-$(CONFIG_DVB_STV090x) += stv090x.o
obj-$(CONFIG_DVB_STV6110x) += stv6110x.o
obj-$(CONFIG_DVB_ISL6423) += isl6423.o
+obj-$(CONFIG_DVB_EC100) += ec100.o
+obj-$(CONFIG_DVB_DS3000) += ds3000.o
diff --git a/drivers/media/dvb/frontends/atbm8830.c b/drivers/media/dvb/frontends/atbm8830.c
new file mode 100644
index 0000000..59881a5
--- /dev/null
+++ b/drivers/media/dvb/frontends/atbm8830.c
@@ -0,0 +1,495 @@
+/*
+ * Support for AltoBeam GB20600 (a.k.a DMB-TH) demodulator
+ * ATBM8830, ATBM8831
+ *
+ * Copyright (C) 2009 David T.L. Wong <davidtlwong@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <asm/div64.h>
+#include "dvb_frontend.h"
+
+#include "atbm8830.h"
+#include "atbm8830_priv.h"
+
+#define dprintk(args...) \
+ do { \
+ if (debug) \
+ printk(KERN_DEBUG "atbm8830: " args); \
+ } while (0)
+
+static int debug;
+
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
+
+static int atbm8830_write_reg(struct atbm_state *priv, u16 reg, u8 data)
+{
+ int ret = 0;
+ u8 dev_addr;
+ u8 buf1[] = { reg >> 8, reg & 0xFF };
+ u8 buf2[] = { data };
+ struct i2c_msg msg1 = { .flags = 0, .buf = buf1, .len = 2 };
+ struct i2c_msg msg2 = { .flags = 0, .buf = buf2, .len = 1 };
+
+ dev_addr = priv->config->demod_address;
+ msg1.addr = dev_addr;
+ msg2.addr = dev_addr;
+
+ if (debug >= 2)
+ printk(KERN_DEBUG "%s: reg=0x%04X, data=0x%02X\n",
+ __func__, reg, data);
+
+ ret = i2c_transfer(priv->i2c, &msg1, 1);
+ if (ret != 1)
+ return -EIO;
+
+ ret = i2c_transfer(priv->i2c, &msg2, 1);
+ return (ret != 1) ? -EIO : 0;
+}
+
+static int atbm8830_read_reg(struct atbm_state *priv, u16 reg, u8 *p_data)
+{
+ int ret;
+ u8 dev_addr;
+
+ u8 buf1[] = { reg >> 8, reg & 0xFF };
+ u8 buf2[] = { 0 };
+ struct i2c_msg msg1 = { .flags = 0, .buf = buf1, .len = 2 };
+ struct i2c_msg msg2 = { .flags = I2C_M_RD, .buf = buf2, .len = 1 };
+
+ dev_addr = priv->config->demod_address;
+ msg1.addr = dev_addr;
+ msg2.addr = dev_addr;
+
+ ret = i2c_transfer(priv->i2c, &msg1, 1);
+ if (ret != 1) {
+ dprintk(KERN_DEBUG "%s: error reg=0x%04x, ret=%i\n",
+ __func__, reg, ret);
+ return -EIO;
+ }
+
+ ret = i2c_transfer(priv->i2c, &msg2, 1);
+ if (ret != 1)
+ return -EIO;
+
+ *p_data = buf2[0];
+ if (debug >= 2)
+ printk(KERN_DEBUG "%s: reg=0x%04X, data=0x%02X\n",
+ __func__, reg, buf2[0]);
+
+ return 0;
+}
+
+/* Lock register latch so that multi-register read is atomic */
+static inline int atbm8830_reglatch_lock(struct atbm_state *priv, int lock)
+{
+ return atbm8830_write_reg(priv, REG_READ_LATCH, lock ? 1 : 0);
+}
+
+static int set_osc_freq(struct atbm_state *priv, u32 freq /*in kHz*/)
+{
+ u32 val;
+ u64 t;
+
+ /* 0x100000 * freq / 30.4MHz */
+ t = (u64)0x100000 * freq;
+ do_div(t, 30400);
+ val = t;
+
+ atbm8830_write_reg(priv, REG_OSC_CLK, val);
+ atbm8830_write_reg(priv, REG_OSC_CLK + 1, val >> 8);
+ atbm8830_write_reg(priv, REG_OSC_CLK + 2, val >> 16);
+
+ return 0;
+}
+
+static int set_if_freq(struct atbm_state *priv, u32 freq /*in kHz*/)
+{
+
+ u32 fs = priv->config->osc_clk_freq;
+ u64 t;
+ u32 val;
+ u8 dat;
+
+ if (freq != 0) {
+ /* 2 * PI * (freq - fs) / fs * (2 ^ 22) */
+ t = (u64) 2 * 31416 * (freq - fs);
+ t <<= 22;
+ do_div(t, fs);
+ do_div(t, 1000);
+ val = t;
+
+ atbm8830_write_reg(priv, REG_TUNER_BASEBAND, 1);
+ atbm8830_write_reg(priv, REG_IF_FREQ, val);
+ atbm8830_write_reg(priv, REG_IF_FREQ+1, val >> 8);
+ atbm8830_write_reg(priv, REG_IF_FREQ+2, val >> 16);
+
+ atbm8830_read_reg(priv, REG_ADC_CONFIG, &dat);
+ dat &= 0xFC;
+ atbm8830_write_reg(priv, REG_ADC_CONFIG, dat);
+ } else {
+ /* Zero IF */
+ atbm8830_write_reg(priv, REG_TUNER_BASEBAND, 0);
+
+ atbm8830_read_reg(priv, REG_ADC_CONFIG, &dat);
+ dat &= 0xFC;
+ dat |= 0x02;
+ atbm8830_write_reg(priv, REG_ADC_CONFIG, dat);
+
+ if (priv->config->zif_swap_iq)
+ atbm8830_write_reg(priv, REG_SWAP_I_Q, 0x03);
+ else
+ atbm8830_write_reg(priv, REG_SWAP_I_Q, 0x01);
+ }
+
+ return 0;
+}
+
+static int is_locked(struct atbm_state *priv, u8 *locked)
+{
+ u8 status;
+
+ atbm8830_read_reg(priv, REG_LOCK_STATUS, &status);
+
+ if (locked != NULL)
+ *locked = (status == 1);
+ return 0;
+}
+
+
+static int set_static_channel_mode(struct atbm_state *priv)
+{
+ int i;
+
+ for (i = 0; i < 5; i++)
+ atbm8830_write_reg(priv, 0x099B + i, 0x08);
+
+ atbm8830_write_reg(priv, 0x095B, 0x7F);
+ atbm8830_write_reg(priv, 0x09CB, 0x01);
+ atbm8830_write_reg(priv, 0x09CC, 0x7F);
+ atbm8830_write_reg(priv, 0x09CD, 0x7F);
+ atbm8830_write_reg(priv, 0x0E01, 0x20);
+
+ /* For single carrier */
+ atbm8830_write_reg(priv, 0x0B03, 0x0A);
+ atbm8830_write_reg(priv, 0x0935, 0x10);
+ atbm8830_write_reg(priv, 0x0936, 0x08);
+ atbm8830_write_reg(priv, 0x093E, 0x08);
+ atbm8830_write_reg(priv, 0x096E, 0x06);
+
+ /* frame_count_max0 */
+ atbm8830_write_reg(priv, 0x0B09, 0x00);
+ /* frame_count_max1 */
+ atbm8830_write_reg(priv, 0x0B0A, 0x08);
+
+ return 0;
+}
+
+static int set_ts_config(struct atbm_state *priv)
+{
+ const struct atbm8830_config *cfg = priv->config;
+
+ /*Set parallel/serial ts mode*/
+ atbm8830_write_reg(priv, REG_TS_SERIAL, cfg->serial_ts ? 1 : 0);
+ atbm8830_write_reg(priv, REG_TS_CLK_MODE, cfg->serial_ts ? 1 : 0);
+ /*Set ts sampling edge*/
+ atbm8830_write_reg(priv, REG_TS_SAMPLE_EDGE,
+ cfg->ts_sampling_edge ? 1 : 0);
+ /*Set ts clock freerun*/
+ atbm8830_write_reg(priv, REG_TS_CLK_FREERUN,
+ cfg->ts_clk_gated ? 0 : 1);
+
+ return 0;
+}
+
+static int atbm8830_init(struct dvb_frontend *fe)
+{
+ struct atbm_state *priv = fe->demodulator_priv;
+ const struct atbm8830_config *cfg = priv->config;
+
+ /*Set oscillator frequency*/
+ set_osc_freq(priv, cfg->osc_clk_freq);
+
+ /*Set IF frequency*/
+ set_if_freq(priv, cfg->if_freq);
+
+
+ /*Set static channel mode*/
+ set_static_channel_mode(priv);
+
+ set_ts_config(priv);
+ /*Turn off DSP reset*/
+ atbm8830_write_reg(priv, 0x000A, 0);
+
+ /*SW version test*/
+ atbm8830_write_reg(priv, 0x020C, 11);
+
+ /* Run */
+ atbm8830_write_reg(priv, REG_DEMOD_RUN, 1);
+
+ return 0;
+}
+
+
+static void atbm8830_release(struct dvb_frontend *fe)
+{
+ struct atbm_state *state = fe->demodulator_priv;
+ dprintk("%s\n", __func__);
+
+ kfree(state);
+}
+
+static int atbm8830_set_fe(struct dvb_frontend *fe,
+ struct dvb_frontend_parameters *fe_params)
+{
+ struct atbm_state *priv = fe->demodulator_priv;
+ int i;
+ u8 locked = 0;
+ dprintk("%s\n", __func__);
+
+ /* set frequency */
+ if (fe->ops.tuner_ops.set_params) {
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+ fe->ops.tuner_ops.set_params(fe, fe_params);
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 0);
+ }
+
+ /* start auto lock */
+ for (i = 0; i < 10; i++) {
+ mdelay(100);
+ dprintk("Try %d\n", i);
+ is_locked(priv, &locked);
+ if (locked != 0) {
+ dprintk("ATBM8830 locked!\n");
+ break;
+ }
+ }
+
+ return 0;
+}
+
+static int atbm8830_get_fe(struct dvb_frontend *fe,
+ struct dvb_frontend_parameters *fe_params)
+{
+ dprintk("%s\n", __func__);
+
+ /* TODO: get real readings from device */
+ /* inversion status */
+ fe_params->inversion = INVERSION_OFF;
+
+ /* bandwidth */
+ fe_params->u.ofdm.bandwidth = BANDWIDTH_8_MHZ;
+
+ fe_params->u.ofdm.code_rate_HP = FEC_AUTO;
+ fe_params->u.ofdm.code_rate_LP = FEC_AUTO;
+
+ fe_params->u.ofdm.constellation = QAM_AUTO;
+
+ /* transmission mode */
+ fe_params->u.ofdm.transmission_mode = TRANSMISSION_MODE_AUTO;
+
+ /* guard interval */
+ fe_params->u.ofdm.guard_interval = GUARD_INTERVAL_AUTO;
+
+ /* hierarchy */
+ fe_params->u.ofdm.hierarchy_information = HIERARCHY_NONE;
+
+ return 0;
+}
+
+static int atbm8830_get_tune_settings(struct dvb_frontend *fe,
+ struct dvb_frontend_tune_settings *fesettings)
+{
+ fesettings->min_delay_ms = 0;
+ fesettings->step_size = 0;
+ fesettings->max_drift = 0;
+ return 0;
+}
+
+static int atbm8830_read_status(struct dvb_frontend *fe, fe_status_t *fe_status)
+{
+ struct atbm_state *priv = fe->demodulator_priv;
+ u8 locked = 0;
+ u8 agc_locked = 0;
+
+ dprintk("%s\n", __func__);
+ *fe_status = 0;
+
+ is_locked(priv, &locked);
+ if (locked) {
+ *fe_status |= FE_HAS_SIGNAL | FE_HAS_CARRIER |
+ FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK;
+ }
+ dprintk("%s: fe_status=0x%x\n", __func__, *fe_status);
+
+ atbm8830_read_reg(priv, REG_AGC_LOCK, &agc_locked);
+ dprintk("AGC Lock: %d\n", agc_locked);
+
+ return 0;
+}
+
+static int atbm8830_read_ber(struct dvb_frontend *fe, u32 *ber)
+{
+ struct atbm_state *priv = fe->demodulator_priv;
+ u32 frame_err;
+ u8 t;
+
+ dprintk("%s\n", __func__);
+
+ atbm8830_reglatch_lock(priv, 1);
+
+ atbm8830_read_reg(priv, REG_FRAME_ERR_CNT + 1, &t);
+ frame_err = t & 0x7F;
+ frame_err <<= 8;
+ atbm8830_read_reg(priv, REG_FRAME_ERR_CNT, &t);
+ frame_err |= t;
+
+ atbm8830_reglatch_lock(priv, 0);
+
+ *ber = frame_err * 100 / 32767;
+
+ dprintk("%s: ber=0x%x\n", __func__, *ber);
+ return 0;
+}
+
+static int atbm8830_read_signal_strength(struct dvb_frontend *fe, u16 *signal)
+{
+ struct atbm_state *priv = fe->demodulator_priv;
+ u32 pwm;
+ u8 t;
+
+ dprintk("%s\n", __func__);
+ atbm8830_reglatch_lock(priv, 1);
+
+ atbm8830_read_reg(priv, REG_AGC_PWM_VAL + 1, &t);
+ pwm = t & 0x03;
+ pwm <<= 8;
+ atbm8830_read_reg(priv, REG_AGC_PWM_VAL, &t);
+ pwm |= t;
+
+ atbm8830_reglatch_lock(priv, 0);
+
+ dprintk("AGC PWM = 0x%02X\n", pwm);
+ pwm = 0x400 - pwm;
+
+ *signal = pwm * 0x10000 / 0x400;
+
+ return 0;
+}
+
+static int atbm8830_read_snr(struct dvb_frontend *fe, u16 *snr)
+{
+ dprintk("%s\n", __func__);
+ *snr = 0;
+ return 0;
+}
+
+static int atbm8830_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
+{
+ dprintk("%s\n", __func__);
+ *ucblocks = 0;
+ return 0;
+}
+
+static int atbm8830_i2c_gate_ctrl(struct dvb_frontend *fe, int enable)
+{
+ struct atbm_state *priv = fe->demodulator_priv;
+
+ return atbm8830_write_reg(priv, REG_I2C_GATE, enable ? 1 : 0);
+}
+
+static struct dvb_frontend_ops atbm8830_ops = {
+ .info = {
+ .name = "AltoBeam ATBM8830/8831 DMB-TH",
+ .type = FE_OFDM,
+ .frequency_min = 474000000,
+ .frequency_max = 858000000,
+ .frequency_stepsize = 10000,
+ .caps =
+ FE_CAN_FEC_AUTO |
+ FE_CAN_QAM_AUTO |
+ FE_CAN_TRANSMISSION_MODE_AUTO |
+ FE_CAN_GUARD_INTERVAL_AUTO
+ },
+
+ .release = atbm8830_release,
+
+ .init = atbm8830_init,
+ .sleep = NULL,
+ .write = NULL,
+ .i2c_gate_ctrl = atbm8830_i2c_gate_ctrl,
+
+ .set_frontend = atbm8830_set_fe,
+ .get_frontend = atbm8830_get_fe,
+ .get_tune_settings = atbm8830_get_tune_settings,
+
+ .read_status = atbm8830_read_status,
+ .read_ber = atbm8830_read_ber,
+ .read_signal_strength = atbm8830_read_signal_strength,
+ .read_snr = atbm8830_read_snr,
+ .read_ucblocks = atbm8830_read_ucblocks,
+};
+
+struct dvb_frontend *atbm8830_attach(const struct atbm8830_config *config,
+ struct i2c_adapter *i2c)
+{
+ struct atbm_state *priv = NULL;
+ u8 data = 0;
+
+ dprintk("%s()\n", __func__);
+
+ if (config == NULL || i2c == NULL)
+ return NULL;
+
+ priv = kzalloc(sizeof(struct atbm_state), GFP_KERNEL);
+ if (priv == NULL)
+ goto error_out;
+
+ priv->config = config;
+ priv->i2c = i2c;
+
+ /* check if the demod is there */
+ if (atbm8830_read_reg(priv, REG_CHIP_ID, &data) != 0) {
+ dprintk("%s atbm8830/8831 not found at i2c addr 0x%02X\n",
+ __func__, priv->config->demod_address);
+ goto error_out;
+ }
+ dprintk("atbm8830 chip id: 0x%02X\n", data);
+
+ memcpy(&priv->frontend.ops, &atbm8830_ops,
+ sizeof(struct dvb_frontend_ops));
+ priv->frontend.demodulator_priv = priv;
+
+ atbm8830_init(&priv->frontend);
+
+ atbm8830_i2c_gate_ctrl(&priv->frontend, 1);
+
+ return &priv->frontend;
+
+error_out:
+ dprintk("%s() error_out\n", __func__);
+ kfree(priv);
+ return NULL;
+
+}
+EXPORT_SYMBOL(atbm8830_attach);
+
+MODULE_DESCRIPTION("AltoBeam ATBM8830/8831 GB20600 demodulator driver");
+MODULE_AUTHOR("David T. L. Wong <davidtlwong@gmail.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/atbm8830.h b/drivers/media/dvb/frontends/atbm8830.h
new file mode 100644
index 0000000..e8149f3
--- /dev/null
+++ b/drivers/media/dvb/frontends/atbm8830.h
@@ -0,0 +1,76 @@
+/*
+ * Support for AltoBeam GB20600 (a.k.a DMB-TH) demodulator
+ * ATBM8830, ATBM8831
+ *
+ * Copyright (C) 2009 David T.L. Wong <davidtlwong@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ATBM8830_H__
+#define __ATBM8830_H__
+
+#include <linux/dvb/frontend.h>
+#include <linux/i2c.h>
+
+#define ATBM8830_PROD_8830 0
+#define ATBM8830_PROD_8831 1
+
+struct atbm8830_config {
+
+ /* product type */
+ u8 prod;
+
+ /* the demodulator's i2c address */
+ u8 demod_address;
+
+ /* parallel or serial transport stream */
+ u8 serial_ts;
+
+ /* transport stream clock output only when receving valid stream */
+ u8 ts_clk_gated;
+
+ /* Decoder sample TS data at rising edge of clock */
+ u8 ts_sampling_edge;
+
+ /* Oscillator clock frequency */
+ u32 osc_clk_freq; /* in kHz */
+
+ /* IF frequency */
+ u32 if_freq; /* in kHz */
+
+ /* Swap I/Q for zero IF */
+ u8 zif_swap_iq;
+
+ /* Tuner AGC settings */
+ u8 agc_min;
+ u8 agc_max;
+ u8 agc_hold_loop;
+};
+
+#if defined(CONFIG_DVB_ATBM8830) || \
+ (defined(CONFIG_DVB_ATBM8830_MODULE) && defined(MODULE))
+extern struct dvb_frontend *atbm8830_attach(const struct atbm8830_config *config,
+ struct i2c_adapter *i2c);
+#else
+static inline
+struct dvb_frontend *atbm8830_attach(const struct atbm8830_config *config,
+ struct i2c_adapter *i2c) {
+ printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+ return NULL;
+}
+#endif /* CONFIG_DVB_ATBM8830 */
+
+#endif /* __ATBM8830_H__ */
diff --git a/drivers/media/dvb/frontends/atbm8830_priv.h b/drivers/media/dvb/frontends/atbm8830_priv.h
new file mode 100644
index 0000000..ce960f7
--- /dev/null
+++ b/drivers/media/dvb/frontends/atbm8830_priv.h
@@ -0,0 +1,75 @@
+/*
+ * Support for AltoBeam GB20600 (a.k.a DMB-TH) demodulator
+ * ATBM8830, ATBM8831
+ *
+ * Copyright (C) 2009 David T.L. Wong <davidtlwong@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ATBM8830_PRIV_H
+#define __ATBM8830_PRIV_H
+
+struct atbm_state {
+ struct i2c_adapter *i2c;
+ /* configuration settings */
+ const struct atbm8830_config *config;
+ struct dvb_frontend frontend;
+};
+
+#define REG_CHIP_ID 0x0000
+#define REG_TUNER_BASEBAND 0x0001
+#define REG_DEMOD_RUN 0x0004
+#define REG_DSP_RESET 0x0005
+#define REG_RAM_RESET 0x0006
+#define REG_ADC_RESET 0x0007
+#define REG_TSPORT_RESET 0x0008
+#define REG_BLKERR_POL 0x000C
+#define REG_I2C_GATE 0x0103
+#define REG_TS_SAMPLE_EDGE 0x0301
+#define REG_TS_PKT_LEN_204 0x0302
+#define REG_TS_PKT_LEN_AUTO 0x0303
+#define REG_TS_SERIAL 0x0305
+#define REG_TS_CLK_FREERUN 0x0306
+#define REG_TS_VALID_MODE 0x0307
+#define REG_TS_CLK_MODE 0x030B /* 1 for serial, 0 for parallel */
+
+#define REG_TS_ERRBIT_USE 0x030C
+#define REG_LOCK_STATUS 0x030D
+#define REG_ADC_CONFIG 0x0602
+#define REG_CARRIER_OFFSET 0x0827 /* 0x0827-0x0829 little endian */
+#define REG_DETECTED_PN_MODE 0x082D
+#define REG_READ_LATCH 0x084D
+#define REG_IF_FREQ 0x0A00 /* 0x0A00-0x0A02 little endian */
+#define REG_OSC_CLK 0x0A03 /* 0x0A03-0x0A05 little endian */
+#define REG_BYPASS_CCI 0x0A06
+#define REG_ANALOG_LUMA_DETECTED 0x0A25
+#define REG_ANALOG_AUDIO_DETECTED 0x0A26
+#define REG_ANALOG_CHROMA_DETECTED 0x0A39
+#define REG_FRAME_ERR_CNT 0x0B04
+#define REG_USE_EXT_ADC 0x0C00
+#define REG_SWAP_I_Q 0x0C01
+#define REG_TPS_MANUAL 0x0D01
+#define REG_TPS_CONFIG 0x0D02
+#define REG_BYPASS_DEINTERLEAVER 0x0E00
+#define REG_AGC_TARGET 0x1003 /* 0x1003-0x1005 little endian */
+#define REG_AGC_MIN 0x1020
+#define REG_AGC_MAX 0x1023
+#define REG_AGC_LOCK 0x1027
+#define REG_AGC_PWM_VAL 0x1028 /* 0x1028-0x1029 little endian */
+#define REG_AGC_HOLD_LOOP 0x1031
+
+#endif
+
diff --git a/drivers/media/dvb/frontends/au8522_decoder.c b/drivers/media/dvb/frontends/au8522_decoder.c
index 74981ee..2dc2723 100644
--- a/drivers/media/dvb/frontends/au8522_decoder.c
+++ b/drivers/media/dvb/frontends/au8522_decoder.c
@@ -23,7 +23,6 @@
/* Developer notes:
*
* VBI support is not yet working
- * Saturation and hue setting are not yet working
* Enough is implemented here for CVBS and S-Video inputs, but the actual
* analog demodulator code isn't implemented (not needed for xc5000 since it
* has its own demodulator and outputs CVBS)
@@ -236,8 +235,10 @@
state->contrast = 0x79;
au8522_writereg(state, AU8522_TVDEC_SATURATION_CB_REG00CH, 0x80);
au8522_writereg(state, AU8522_TVDEC_SATURATION_CR_REG00DH, 0x80);
+ state->saturation = 0x80;
au8522_writereg(state, AU8522_TVDEC_HUE_H_REG00EH, 0x00);
au8522_writereg(state, AU8522_TVDEC_HUE_L_REG00FH, 0x00);
+ state->hue = 0x00;
/* Other decoder registers */
au8522_writereg(state, AU8522_TVDEC_INT_MASK_REG010H, 0x00);
@@ -315,7 +316,7 @@
if (input_mode == AU8522_INPUT_CONTROL_REG081H_SVIDEO_CH13 ||
input_mode == AU8522_INPUT_CONTROL_REG081H_SVIDEO_CH24) {
/* Despite what the table says, for the HVR-950q we still need
- to be in CVBS mode for the S-Video input (reason uknown). */
+ to be in CVBS mode for the S-Video input (reason unknown). */
/* filter_coef_type = 3; */
filter_coef_type = 5;
} else {
@@ -504,7 +505,19 @@
ctrl->value);
break;
case V4L2_CID_SATURATION:
+ state->saturation = ctrl->value;
+ au8522_writereg(state, AU8522_TVDEC_SATURATION_CB_REG00CH,
+ ctrl->value);
+ au8522_writereg(state, AU8522_TVDEC_SATURATION_CR_REG00DH,
+ ctrl->value);
+ break;
case V4L2_CID_HUE:
+ state->hue = ctrl->value;
+ au8522_writereg(state, AU8522_TVDEC_HUE_H_REG00EH,
+ ctrl->value >> 8);
+ au8522_writereg(state, AU8522_TVDEC_HUE_L_REG00FH,
+ ctrl->value & 0xFF);
+ break;
case V4L2_CID_AUDIO_VOLUME:
case V4L2_CID_AUDIO_BASS:
case V4L2_CID_AUDIO_TREBLE:
@@ -534,7 +547,11 @@
ctrl->value = state->contrast;
break;
case V4L2_CID_SATURATION:
+ ctrl->value = state->saturation;
+ break;
case V4L2_CID_HUE:
+ ctrl->value = state->hue;
+ break;
case V4L2_CID_AUDIO_VOLUME:
case V4L2_CID_AUDIO_BASS:
case V4L2_CID_AUDIO_TREBLE:
@@ -632,8 +649,9 @@
case V4L2_CID_BRIGHTNESS:
return v4l2_ctrl_query_fill(qc, 0, 255, 1, 128);
case V4L2_CID_SATURATION:
+ return v4l2_ctrl_query_fill(qc, 0, 255, 1, 128);
case V4L2_CID_HUE:
- /* Not yet implemented */
+ return v4l2_ctrl_query_fill(qc, -32768, 32768, 1, 0);
default:
break;
}
diff --git a/drivers/media/dvb/frontends/au8522_priv.h b/drivers/media/dvb/frontends/au8522_priv.h
index f328f2b..c74c4e7 100644
--- a/drivers/media/dvb/frontends/au8522_priv.h
+++ b/drivers/media/dvb/frontends/au8522_priv.h
@@ -62,6 +62,8 @@
u32 rev;
u8 brightness;
u8 contrast;
+ u8 saturation;
+ s16 hue;
};
/* These are routines shared by both the VSB/QAM demodulator and the analog
diff --git a/drivers/media/dvb/frontends/cx24110.c b/drivers/media/dvb/frontends/cx24110.c
index ffbcfab..00a4e8f 100644
--- a/drivers/media/dvb/frontends/cx24110.c
+++ b/drivers/media/dvb/frontends/cx24110.c
@@ -1,4 +1,4 @@
- /*
+/*
cx24110 - Single Chip Satellite Channel Receiver driver module
Copyright (C) 2002 Peter Hettkamp <peter.hettkamp@htp-tel.de> based on
@@ -96,7 +96,7 @@
{0x42,0x00}, /* @ middle bytes " */
{0x43,0x00}, /* @ LSB " */
/* leave the carrier tracking loop parameters on default */
- /* leave the bit timing loop parameters at gefault */
+ /* leave the bit timing loop parameters at default */
{0x56,0x4d}, /* set the filtune voltage to 2.7V, as recommended by */
/* the cx24108 data sheet for symbol rates above 15MS/s */
{0x57,0x00}, /* @ Filter sigma delta enabled, positive */
diff --git a/drivers/media/dvb/frontends/cx24113.c b/drivers/media/dvb/frontends/cx24113.c
index 075b2b5..e9ee555 100644
--- a/drivers/media/dvb/frontends/cx24113.c
+++ b/drivers/media/dvb/frontends/cx24113.c
@@ -589,7 +589,7 @@
info("detected CX24113 variant\n");
break;
case REV_CX24113:
- info("sucessfully detected\n");
+ info("successfully detected\n");
break;
default:
err("unsupported device id: %x\n", state->rev);
diff --git a/drivers/media/dvb/frontends/dib3000mb.c b/drivers/media/dvb/frontends/dib3000mb.c
index 136b9d2..ad4c8cf 100644
--- a/drivers/media/dvb/frontends/dib3000mb.c
+++ b/drivers/media/dvb/frontends/dib3000mb.c
@@ -154,7 +154,7 @@
case BANDWIDTH_AUTO:
return -EOPNOTSUPP;
default:
- err("unkown bandwidth value.");
+ err("unknown bandwidth value.");
return -EINVAL;
}
}
diff --git a/drivers/media/dvb/frontends/dib7000p.c b/drivers/media/dvb/frontends/dib7000p.c
index 0781f94..750ae61 100644
--- a/drivers/media/dvb/frontends/dib7000p.c
+++ b/drivers/media/dvb/frontends/dib7000p.c
@@ -108,7 +108,7 @@
outreg = 0;
fifo_threshold = 1792;
- smo_mode = (dib7000p_read_word(state, 235) & 0x0010) | (1 << 1);
+ smo_mode = (dib7000p_read_word(state, 235) & 0x0050) | (1 << 1);
dprintk( "setting output mode for demod %p to %d",
&state->demod, mode);
@@ -162,18 +162,19 @@
if (state->div_force_off) {
dprintk( "diversity combination deactivated - forced by COFDM parameters");
onoff = 0;
- }
+ dib7000p_write_word(state, 207, 0);
+ } else
+ dib7000p_write_word(state, 207, (state->div_sync_wait << 4) | (1 << 2) | (2 << 0));
+
state->div_state = (u8)onoff;
if (onoff) {
dib7000p_write_word(state, 204, 6);
dib7000p_write_word(state, 205, 16);
/* P_dvsy_sync_mode = 0, P_dvsy_sync_enable=1, P_dvcb_comb_mode=2 */
- dib7000p_write_word(state, 207, (state->div_sync_wait << 4) | (1 << 2) | (2 << 0));
} else {
dib7000p_write_word(state, 204, 1);
dib7000p_write_word(state, 205, 0);
- dib7000p_write_word(state, 207, 0);
}
return 0;
@@ -1188,7 +1189,7 @@
*stat |= FE_HAS_VITERBI;
if (lock & 0x0010)
*stat |= FE_HAS_SYNC;
- if (lock & 0x0008)
+ if ((lock & 0x0038) == 0x38)
*stat |= FE_HAS_LOCK;
return 0;
@@ -1302,6 +1303,24 @@
}
EXPORT_SYMBOL(dib7000p_get_i2c_master);
+int dib7000p_pid_filter_ctrl(struct dvb_frontend *fe, u8 onoff)
+{
+ struct dib7000p_state *state = fe->demodulator_priv;
+ u16 val = dib7000p_read_word(state, 235) & 0xffef;
+ val |= (onoff & 0x1) << 4;
+ dprintk("PID filter enabled %d", onoff);
+ return dib7000p_write_word(state, 235, val);
+}
+EXPORT_SYMBOL(dib7000p_pid_filter_ctrl);
+
+int dib7000p_pid_filter(struct dvb_frontend *fe, u8 id, u16 pid, u8 onoff)
+{
+ struct dib7000p_state *state = fe->demodulator_priv;
+ dprintk("PID filter: index %x, PID %d, OnOff %d", id, pid, onoff);
+ return dib7000p_write_word(state, 241 + id, onoff ? (1 << 13) | pid : 0);
+}
+EXPORT_SYMBOL(dib7000p_pid_filter);
+
int dib7000p_i2c_enumeration(struct i2c_adapter *i2c, int no_of_demods, u8 default_addr, struct dib7000p_config cfg[])
{
struct dib7000p_state st = { .i2c_adap = i2c };
@@ -1314,8 +1333,10 @@
/* designated i2c address */
new_addr = (0x40 + k) << 1;
st.i2c_addr = new_addr;
+ dib7000p_write_word(&st, 1287, 0x0003); /* sram lead in, rdy */
if (dib7000p_identify(&st) != 0) {
st.i2c_addr = default_addr;
+ dib7000p_write_word(&st, 1287, 0x0003); /* sram lead in, rdy */
if (dib7000p_identify(&st) != 0) {
dprintk("DiB7000P #%d: not identified\n", k);
return -EIO;
@@ -1372,6 +1393,8 @@
demod->demodulator_priv = st;
memcpy(&st->demod.ops, &dib7000p_ops, sizeof(struct dvb_frontend_ops));
+ dib7000p_write_word(st, 1287, 0x0003); /* sram lead in, rdy */
+
if (dib7000p_identify(st) != 0)
goto error;
diff --git a/drivers/media/dvb/frontends/dib7000p.h b/drivers/media/dvb/frontends/dib7000p.h
index 02a4c82..805dd13 100644
--- a/drivers/media/dvb/frontends/dib7000p.h
+++ b/drivers/media/dvb/frontends/dib7000p.h
@@ -51,6 +51,8 @@
extern int dib7000p_set_gpio(struct dvb_frontend *, u8 num, u8 dir, u8 val);
extern int dib7000p_set_wbd_ref(struct dvb_frontend *, u16 value);
extern int dib7000pc_detection(struct i2c_adapter *i2c_adap);
+extern int dib7000p_pid_filter(struct dvb_frontend *, u8 id, u16 pid, u8 onoff);
+extern int dib7000p_pid_filter_ctrl(struct dvb_frontend *fe, u8 onoff);
#else
static inline
struct dvb_frontend *dib7000p_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr,
@@ -95,6 +97,17 @@
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
return -ENODEV;
}
+static inline int dib7000p_pid_filter(struct dvb_frontend *fe, u8 id, u16 pid, u8 onoff)
+{
+ printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+ return -ENODEV;
+}
+
+static inline int dib7000p_pid_filter_ctrl(struct dvb_frontend *fe, uint8_t onoff)
+{
+ printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+ return -ENODEV;
+}
#endif
#endif
diff --git a/drivers/media/dvb/frontends/dib8000.c b/drivers/media/dvb/frontends/dib8000.c
index 852c790..898400d 100644
--- a/drivers/media/dvb/frontends/dib8000.c
+++ b/drivers/media/dvb/frontends/dib8000.c
@@ -954,7 +954,7 @@
u8 guard, crate, constellation, timeI;
u8 permu_seg[] = { 6, 5, 7, 4, 8, 3, 9, 2, 10, 1, 11, 0, 12 };
u16 i, coeff[4], P_cfr_left_edge = 0, P_cfr_right_edge = 0, seg_mask13 = 0x1fff; // All 13 segments enabled
- const s16 *ncoeff, *ana_fe;
+ const s16 *ncoeff = NULL, *ana_fe;
u16 tmcc_pow = 0;
u16 coff_pow = 0x2800;
u16 init_prbs = 0xfff;
@@ -2121,7 +2121,7 @@
else
result -= intlog10(2) * 10 * noise_exp - 100;
- *snr = result / (1 << 24);
+ *snr = result / ((1 << 24) / 10);
return 0;
}
@@ -2195,6 +2195,25 @@
EXPORT_SYMBOL(dib8000_get_i2c_master);
+int dib8000_pid_filter_ctrl(struct dvb_frontend *fe, u8 onoff)
+{
+ struct dib8000_state *st = fe->demodulator_priv;
+ u16 val = dib8000_read_word(st, 299) & 0xffef;
+ val |= (onoff & 0x1) << 4;
+
+ dprintk("pid filter enabled %d", onoff);
+ return dib8000_write_word(st, 299, val);
+}
+EXPORT_SYMBOL(dib8000_pid_filter_ctrl);
+
+int dib8000_pid_filter(struct dvb_frontend *fe, u8 id, u16 pid, u8 onoff)
+{
+ struct dib8000_state *st = fe->demodulator_priv;
+ dprintk("Index %x, PID %d, OnOff %d", id, pid, onoff);
+ return dib8000_write_word(st, 305 + id, onoff ? (1 << 13) | pid : 0);
+}
+EXPORT_SYMBOL(dib8000_pid_filter);
+
static const struct dvb_frontend_ops dib8000_ops = {
.info = {
.name = "DiBcom 8000 ISDB-T",
diff --git a/drivers/media/dvb/frontends/dib8000.h b/drivers/media/dvb/frontends/dib8000.h
index a86de34..8c89482 100644
--- a/drivers/media/dvb/frontends/dib8000.h
+++ b/drivers/media/dvb/frontends/dib8000.h
@@ -44,6 +44,8 @@
extern int dib8000_set_gpio(struct dvb_frontend *, u8 num, u8 dir, u8 val);
extern int dib8000_set_wbd_ref(struct dvb_frontend *, u16 value);
+extern int dib8000_pid_filter_ctrl(struct dvb_frontend *, u8 onoff);
+extern int dib8000_pid_filter(struct dvb_frontend *, u8 id, u16 pid, u8 onoff);
#else
static inline struct dvb_frontend *dib8000_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, struct dib8000_config *cfg)
{
@@ -74,6 +76,18 @@
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
return -ENODEV;
}
+
+int dib8000_pid_filter_ctrl(struct dvb_frontend *fe, u8 onoff)
+{
+ printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+ return -ENODEV;
+}
+
+int dib8000_pid_filter(struct dvb_frontend *fe, u8 id, u16 pid, u8 onoff)
+{
+ printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+ return -ENODEV;
+}
#endif
#endif
diff --git a/drivers/media/dvb/frontends/drx397xD.c b/drivers/media/dvb/frontends/drx397xD.c
index 0100755..868b78b 100644
--- a/drivers/media/dvb/frontends/drx397xD.c
+++ b/drivers/media/dvb/frontends/drx397xD.c
@@ -81,7 +81,7 @@
#include "drx397xD_fw.h"
};
-/* use only with writer lock aquired */
+/* use only with writer lock acquired */
static void _drx_release_fw(struct drx397xD_state *s, enum fw_ix ix)
{
memset(&fw[ix].data[0], 0, sizeof(fw[0].data));
diff --git a/drivers/media/dvb/frontends/ds3000.c b/drivers/media/dvb/frontends/ds3000.c
new file mode 100644
index 0000000..cff3535
--- /dev/null
+++ b/drivers/media/dvb/frontends/ds3000.c
@@ -0,0 +1,1367 @@
+/*
+ Montage Technology DS3000/TS2020 - DVBS/S2 Demodulator/Tuner driver
+ Copyright (C) 2009 Konstantin Dimitrov <kosio.dimitrov@gmail.com>
+
+ Copyright (C) 2009 TurboSight.com
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/slab.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/firmware.h>
+
+#include "dvb_frontend.h"
+#include "ds3000.h"
+
+static int debug;
+
+#define dprintk(args...) \
+ do { \
+ if (debug) \
+ printk(args); \
+ } while (0)
+
+/* as of March 2009 current DS3000 firmware version is 1.78 */
+/* DS3000 FW v1.78 MD5: a32d17910c4f370073f9346e71d34b80 */
+#define DS3000_DEFAULT_FIRMWARE "dvb-fe-ds3000.fw"
+
+#define DS3000_SAMPLE_RATE 96000 /* in kHz */
+#define DS3000_XTAL_FREQ 27000 /* in kHz */
+
+/* Register values to initialise the demod in DVB-S mode */
+static u8 ds3000_dvbs_init_tab[] = {
+ 0x23, 0x05,
+ 0x08, 0x03,
+ 0x0c, 0x00,
+ 0x21, 0x54,
+ 0x25, 0x82,
+ 0x27, 0x31,
+ 0x30, 0x08,
+ 0x31, 0x40,
+ 0x32, 0x32,
+ 0x33, 0x35,
+ 0x35, 0xff,
+ 0x3a, 0x00,
+ 0x37, 0x10,
+ 0x38, 0x10,
+ 0x39, 0x02,
+ 0x42, 0x60,
+ 0x4a, 0x40,
+ 0x4b, 0x04,
+ 0x4d, 0x91,
+ 0x5d, 0xc8,
+ 0x50, 0x77,
+ 0x51, 0x77,
+ 0x52, 0x36,
+ 0x53, 0x36,
+ 0x56, 0x01,
+ 0x63, 0x43,
+ 0x64, 0x30,
+ 0x65, 0x40,
+ 0x68, 0x26,
+ 0x69, 0x4c,
+ 0x70, 0x20,
+ 0x71, 0x70,
+ 0x72, 0x04,
+ 0x73, 0x00,
+ 0x70, 0x40,
+ 0x71, 0x70,
+ 0x72, 0x04,
+ 0x73, 0x00,
+ 0x70, 0x60,
+ 0x71, 0x70,
+ 0x72, 0x04,
+ 0x73, 0x00,
+ 0x70, 0x80,
+ 0x71, 0x70,
+ 0x72, 0x04,
+ 0x73, 0x00,
+ 0x70, 0xa0,
+ 0x71, 0x70,
+ 0x72, 0x04,
+ 0x73, 0x00,
+ 0x70, 0x1f,
+ 0x76, 0x00,
+ 0x77, 0xd1,
+ 0x78, 0x0c,
+ 0x79, 0x80,
+ 0x7f, 0x04,
+ 0x7c, 0x00,
+ 0x80, 0x86,
+ 0x81, 0xa6,
+ 0x85, 0x04,
+ 0xcd, 0xf4,
+ 0x90, 0x33,
+ 0xa0, 0x44,
+ 0xc0, 0x18,
+ 0xc3, 0x10,
+ 0xc4, 0x08,
+ 0xc5, 0x80,
+ 0xc6, 0x80,
+ 0xc7, 0x0a,
+ 0xc8, 0x1a,
+ 0xc9, 0x80,
+ 0xfe, 0x92,
+ 0xe0, 0xf8,
+ 0xe6, 0x8b,
+ 0xd0, 0x40,
+ 0xf8, 0x20,
+ 0xfa, 0x0f,
+ 0xfd, 0x20,
+ 0xad, 0x20,
+ 0xae, 0x07,
+ 0xb8, 0x00,
+};
+
+/* Register values to initialise the demod in DVB-S2 mode */
+static u8 ds3000_dvbs2_init_tab[] = {
+ 0x23, 0x0f,
+ 0x08, 0x07,
+ 0x0c, 0x00,
+ 0x21, 0x54,
+ 0x25, 0x82,
+ 0x27, 0x31,
+ 0x30, 0x08,
+ 0x31, 0x32,
+ 0x32, 0x32,
+ 0x33, 0x35,
+ 0x35, 0xff,
+ 0x3a, 0x00,
+ 0x37, 0x10,
+ 0x38, 0x10,
+ 0x39, 0x02,
+ 0x42, 0x60,
+ 0x4a, 0x80,
+ 0x4b, 0x04,
+ 0x4d, 0x81,
+ 0x5d, 0x88,
+ 0x50, 0x36,
+ 0x51, 0x36,
+ 0x52, 0x36,
+ 0x53, 0x36,
+ 0x63, 0x60,
+ 0x64, 0x10,
+ 0x65, 0x10,
+ 0x68, 0x04,
+ 0x69, 0x29,
+ 0x70, 0x20,
+ 0x71, 0x70,
+ 0x72, 0x04,
+ 0x73, 0x00,
+ 0x70, 0x40,
+ 0x71, 0x70,
+ 0x72, 0x04,
+ 0x73, 0x00,
+ 0x70, 0x60,
+ 0x71, 0x70,
+ 0x72, 0x04,
+ 0x73, 0x00,
+ 0x70, 0x80,
+ 0x71, 0x70,
+ 0x72, 0x04,
+ 0x73, 0x00,
+ 0x70, 0xa0,
+ 0x71, 0x70,
+ 0x72, 0x04,
+ 0x73, 0x00,
+ 0x70, 0x1f,
+ 0xa0, 0x44,
+ 0xc0, 0x08,
+ 0xc1, 0x10,
+ 0xc2, 0x08,
+ 0xc3, 0x10,
+ 0xc4, 0x08,
+ 0xc5, 0xf0,
+ 0xc6, 0xf0,
+ 0xc7, 0x0a,
+ 0xc8, 0x1a,
+ 0xc9, 0x80,
+ 0xca, 0x23,
+ 0xcb, 0x24,
+ 0xce, 0x74,
+ 0x90, 0x03,
+ 0x76, 0x80,
+ 0x77, 0x42,
+ 0x78, 0x0a,
+ 0x79, 0x80,
+ 0xad, 0x40,
+ 0xae, 0x07,
+ 0x7f, 0xd4,
+ 0x7c, 0x00,
+ 0x80, 0xa8,
+ 0x81, 0xda,
+ 0x7c, 0x01,
+ 0x80, 0xda,
+ 0x81, 0xec,
+ 0x7c, 0x02,
+ 0x80, 0xca,
+ 0x81, 0xeb,
+ 0x7c, 0x03,
+ 0x80, 0xba,
+ 0x81, 0xdb,
+ 0x85, 0x08,
+ 0x86, 0x00,
+ 0x87, 0x02,
+ 0x89, 0x80,
+ 0x8b, 0x44,
+ 0x8c, 0xaa,
+ 0x8a, 0x10,
+ 0xba, 0x00,
+ 0xf5, 0x04,
+ 0xfe, 0x44,
+ 0xd2, 0x32,
+ 0xb8, 0x00,
+};
+
+/* DS3000 doesn't need some parameters as input and auto-detects them */
+/* save input from the application of those parameters */
+struct ds3000_tuning {
+ u32 frequency;
+ u32 symbol_rate;
+ fe_spectral_inversion_t inversion;
+ enum fe_code_rate fec;
+
+ /* input values */
+ u8 inversion_val;
+ fe_modulation_t delivery;
+ u8 rolloff;
+};
+
+struct ds3000_state {
+ struct i2c_adapter *i2c;
+ const struct ds3000_config *config;
+
+ struct dvb_frontend frontend;
+
+ struct ds3000_tuning dcur;
+ struct ds3000_tuning dnxt;
+
+ u8 skip_fw_load;
+
+ /* previous uncorrected block counter for DVB-S2 */
+ u16 prevUCBS2;
+};
+
+static int ds3000_writereg(struct ds3000_state *state, int reg, int data)
+{
+ u8 buf[] = { reg, data };
+ struct i2c_msg msg = { .addr = state->config->demod_address,
+ .flags = 0, .buf = buf, .len = 2 };
+ int err;
+
+ dprintk("%s: write reg 0x%02x, value 0x%02x\n", __func__, reg, data);
+
+ err = i2c_transfer(state->i2c, &msg, 1);
+ if (err != 1) {
+ printk(KERN_ERR "%s: writereg error(err == %i, reg == 0x%02x,"
+ " value == 0x%02x)\n", __func__, err, reg, data);
+ return -EREMOTEIO;
+ }
+
+ return 0;
+}
+
+static int ds3000_tuner_writereg(struct ds3000_state *state, int reg, int data)
+{
+ u8 buf[] = { reg, data };
+ struct i2c_msg msg = { .addr = 0x60,
+ .flags = 0, .buf = buf, .len = 2 };
+ int err;
+
+ dprintk("%s: write reg 0x%02x, value 0x%02x\n", __func__, reg, data);
+
+ ds3000_writereg(state, 0x03, 0x11);
+ err = i2c_transfer(state->i2c, &msg, 1);
+ if (err != 1) {
+ printk("%s: writereg error(err == %i, reg == 0x%02x,"
+ " value == 0x%02x)\n", __func__, err, reg, data);
+ return -EREMOTEIO;
+ }
+
+ return 0;
+}
+
+/* I2C write for 8k firmware load */
+static int ds3000_writeFW(struct ds3000_state *state, int reg,
+ const u8 *data, u16 len)
+{
+ int i, ret = -EREMOTEIO;
+ struct i2c_msg msg;
+ u8 *buf;
+
+ buf = kmalloc(3, GFP_KERNEL);
+ if (buf == NULL) {
+ printk(KERN_ERR "Unable to kmalloc\n");
+ ret = -ENOMEM;
+ goto error;
+ }
+
+ *(buf) = reg;
+
+ msg.addr = state->config->demod_address;
+ msg.flags = 0;
+ msg.buf = buf;
+ msg.len = 3;
+
+ for (i = 0; i < len; i += 2) {
+ memcpy(buf + 1, data + i, 2);
+
+ dprintk("%s: write reg 0x%02x, len = %d\n", __func__, reg, len);
+
+ ret = i2c_transfer(state->i2c, &msg, 1);
+ if (ret != 1) {
+ printk(KERN_ERR "%s: write error(err == %i, "
+ "reg == 0x%02x\n", __func__, ret, reg);
+ ret = -EREMOTEIO;
+ }
+ }
+
+error:
+ kfree(buf);
+
+ return ret;
+}
+
+static int ds3000_readreg(struct ds3000_state *state, u8 reg)
+{
+ int ret;
+ u8 b0[] = { reg };
+ u8 b1[] = { 0 };
+ struct i2c_msg msg[] = {
+ {
+ .addr = state->config->demod_address,
+ .flags = 0,
+ .buf = b0,
+ .len = 1
+ }, {
+ .addr = state->config->demod_address,
+ .flags = I2C_M_RD,
+ .buf = b1,
+ .len = 1
+ }
+ };
+
+ ret = i2c_transfer(state->i2c, msg, 2);
+
+ if (ret != 2) {
+ printk(KERN_ERR "%s: reg=0x%x(error=%d)\n", __func__, reg, ret);
+ return ret;
+ }
+
+ dprintk("%s: read reg 0x%02x, value 0x%02x\n", __func__, reg, b1[0]);
+
+ return b1[0];
+}
+
+static int ds3000_tuner_readreg(struct ds3000_state *state, u8 reg)
+{
+ int ret;
+ u8 b0[] = { reg };
+ u8 b1[] = { 0 };
+ struct i2c_msg msg[] = {
+ {
+ .addr = 0x60,
+ .flags = 0,
+ .buf = b0,
+ .len = 1
+ }, {
+ .addr = 0x60,
+ .flags = I2C_M_RD,
+ .buf = b1,
+ .len = 1
+ }
+ };
+
+ ds3000_writereg(state, 0x03, 0x12);
+ ret = i2c_transfer(state->i2c, msg, 2);
+
+ if (ret != 2) {
+ printk(KERN_ERR "%s: reg=0x%x(error=%d)\n", __func__, reg, ret);
+ return ret;
+ }
+
+ dprintk("%s: read reg 0x%02x, value 0x%02x\n", __func__, reg, b1[0]);
+
+ return b1[0];
+}
+
+static int ds3000_set_inversion(struct ds3000_state *state,
+ fe_spectral_inversion_t inversion)
+{
+ dprintk("%s(%d)\n", __func__, inversion);
+
+ switch (inversion) {
+ case INVERSION_OFF:
+ case INVERSION_ON:
+ case INVERSION_AUTO:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ state->dnxt.inversion = inversion;
+
+ return 0;
+}
+
+static int ds3000_set_symbolrate(struct ds3000_state *state, u32 rate)
+{
+ int ret = 0;
+
+ dprintk("%s()\n", __func__);
+
+ dprintk("%s() symbol_rate = %d\n", __func__, state->dnxt.symbol_rate);
+
+ /* check if symbol rate is within limits */
+ if ((state->dnxt.symbol_rate >
+ state->frontend.ops.info.symbol_rate_max) ||
+ (state->dnxt.symbol_rate <
+ state->frontend.ops.info.symbol_rate_min))
+ ret = -EOPNOTSUPP;
+
+ state->dnxt.symbol_rate = rate;
+
+ return ret;
+}
+
+static int ds3000_load_firmware(struct dvb_frontend *fe,
+ const struct firmware *fw);
+
+static int ds3000_firmware_ondemand(struct dvb_frontend *fe)
+{
+ struct ds3000_state *state = fe->demodulator_priv;
+ const struct firmware *fw;
+ int ret = 0;
+
+ dprintk("%s()\n", __func__);
+
+ if (ds3000_readreg(state, 0xb2) <= 0)
+ return ret;
+
+ if (state->skip_fw_load)
+ return 0;
+ /* Load firmware */
+ /* request the firmware, this will block until someone uploads it */
+ printk(KERN_INFO "%s: Waiting for firmware upload (%s)...\n", __func__,
+ DS3000_DEFAULT_FIRMWARE);
+ ret = request_firmware(&fw, DS3000_DEFAULT_FIRMWARE,
+ state->i2c->dev.parent);
+ printk(KERN_INFO "%s: Waiting for firmware upload(2)...\n", __func__);
+ if (ret) {
+ printk(KERN_ERR "%s: No firmware uploaded (timeout or file not "
+ "found?)\n", __func__);
+ return ret;
+ }
+
+ /* Make sure we don't recurse back through here during loading */
+ state->skip_fw_load = 1;
+
+ ret = ds3000_load_firmware(fe, fw);
+ if (ret)
+ printk("%s: Writing firmware to device failed\n", __func__);
+
+ release_firmware(fw);
+
+ dprintk("%s: Firmware upload %s\n", __func__,
+ ret == 0 ? "complete" : "failed");
+
+ /* Ensure firmware is always loaded if required */
+ state->skip_fw_load = 0;
+
+ return ret;
+}
+
+static int ds3000_load_firmware(struct dvb_frontend *fe,
+ const struct firmware *fw)
+{
+ struct ds3000_state *state = fe->demodulator_priv;
+
+ dprintk("%s\n", __func__);
+ dprintk("Firmware is %zu bytes (%02x %02x .. %02x %02x)\n",
+ fw->size,
+ fw->data[0],
+ fw->data[1],
+ fw->data[fw->size - 2],
+ fw->data[fw->size - 1]);
+
+ /* Begin the firmware load process */
+ ds3000_writereg(state, 0xb2, 0x01);
+ /* write the entire firmware */
+ ds3000_writeFW(state, 0xb0, fw->data, fw->size);
+ ds3000_writereg(state, 0xb2, 0x00);
+
+ return 0;
+}
+
+static void ds3000_dump_registers(struct dvb_frontend *fe)
+{
+ struct ds3000_state *state = fe->demodulator_priv;
+ int x, y, reg = 0, val;
+
+ for (y = 0; y < 16; y++) {
+ dprintk("%s: %02x: ", __func__, y);
+ for (x = 0; x < 16; x++) {
+ reg = (y << 4) + x;
+ val = ds3000_readreg(state, reg);
+ if (x != 15)
+ dprintk("%02x ", val);
+ else
+ dprintk("%02x\n", val);
+ }
+ }
+ dprintk("%s: -- DS3000 DUMP DONE --\n", __func__);
+}
+
+static int ds3000_read_status(struct dvb_frontend *fe, fe_status_t* status)
+{
+ struct ds3000_state *state = fe->demodulator_priv;
+ struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+ int lock;
+
+ *status = 0;
+
+ switch (c->delivery_system) {
+ case SYS_DVBS:
+ lock = ds3000_readreg(state, 0xd1);
+ if ((lock & 0x07) == 0x07)
+ *status = FE_HAS_SIGNAL | FE_HAS_CARRIER |
+ FE_HAS_VITERBI | FE_HAS_SYNC |
+ FE_HAS_LOCK;
+
+ break;
+ case SYS_DVBS2:
+ lock = ds3000_readreg(state, 0x0d);
+ if ((lock & 0x8f) == 0x8f)
+ *status = FE_HAS_SIGNAL | FE_HAS_CARRIER |
+ FE_HAS_VITERBI | FE_HAS_SYNC |
+ FE_HAS_LOCK;
+
+ break;
+ default:
+ return 1;
+ }
+
+ dprintk("%s: status = 0x%02x\n", __func__, lock);
+
+ return 0;
+}
+
+#define FE_IS_TUNED (FE_HAS_SIGNAL + FE_HAS_LOCK)
+static int ds3000_is_tuned(struct dvb_frontend *fe)
+{
+ fe_status_t tunerstat;
+
+ ds3000_read_status(fe, &tunerstat);
+
+ return ((tunerstat & FE_IS_TUNED) == FE_IS_TUNED);
+}
+
+/* read DS3000 BER value */
+static int ds3000_read_ber(struct dvb_frontend *fe, u32* ber)
+{
+ struct ds3000_state *state = fe->demodulator_priv;
+ struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+ u8 data;
+ u32 ber_reading, lpdc_frames;
+
+ dprintk("%s()\n", __func__);
+
+ switch (c->delivery_system) {
+ case SYS_DVBS:
+ /* set the number of bytes checked during
+ BER estimation */
+ ds3000_writereg(state, 0xf9, 0x04);
+ /* read BER estimation status */
+ data = ds3000_readreg(state, 0xf8);
+ /* check if BER estimation is ready */
+ if ((data & 0x10) == 0) {
+ /* this is the number of error bits,
+ to calculate the bit error rate
+ divide to 8388608 */
+ *ber = (ds3000_readreg(state, 0xf7) << 8) |
+ ds3000_readreg(state, 0xf6);
+ /* start counting error bits */
+ /* need to be set twice
+ otherwise it fails sometimes */
+ data |= 0x10;
+ ds3000_writereg(state, 0xf8, data);
+ ds3000_writereg(state, 0xf8, data);
+ } else
+ /* used to indicate that BER estimation
+ is not ready, i.e. BER is unknown */
+ *ber = 0xffffffff;
+ break;
+ case SYS_DVBS2:
+ /* read the number of LPDC decoded frames */
+ lpdc_frames = (ds3000_readreg(state, 0xd7) << 16) |
+ (ds3000_readreg(state, 0xd6) << 8) |
+ ds3000_readreg(state, 0xd5);
+ /* read the number of packets with bad CRC */
+ ber_reading = (ds3000_readreg(state, 0xf8) << 8) |
+ ds3000_readreg(state, 0xf7);
+ if (lpdc_frames > 750) {
+ /* clear LPDC frame counters */
+ ds3000_writereg(state, 0xd1, 0x01);
+ /* clear bad packets counter */
+ ds3000_writereg(state, 0xf9, 0x01);
+ /* enable bad packets counter */
+ ds3000_writereg(state, 0xf9, 0x00);
+ /* enable LPDC frame counters */
+ ds3000_writereg(state, 0xd1, 0x00);
+ *ber = ber_reading;
+ } else
+ /* used to indicate that BER estimation is not ready,
+ i.e. BER is unknown */
+ *ber = 0xffffffff;
+ break;
+ default:
+ return 1;
+ }
+
+ return 0;
+}
+
+/* read TS2020 signal strength */
+static int ds3000_read_signal_strength(struct dvb_frontend *fe,
+ u16 *signal_strength)
+{
+ struct ds3000_state *state = fe->demodulator_priv;
+ u16 sig_reading, sig_strength;
+ u8 rfgain, bbgain;
+
+ dprintk("%s()\n", __func__);
+
+ rfgain = ds3000_tuner_readreg(state, 0x3d) & 0x1f;
+ bbgain = ds3000_tuner_readreg(state, 0x21) & 0x1f;
+
+ if (rfgain > 15)
+ rfgain = 15;
+ if (bbgain > 13)
+ bbgain = 13;
+
+ sig_reading = rfgain * 2 + bbgain * 3;
+
+ sig_strength = 40 + (64 - sig_reading) * 50 / 64 ;
+
+ /* cook the value to be suitable for szap-s2 human readable output */
+ *signal_strength = sig_strength * 1000;
+
+ dprintk("%s: raw / cooked = 0x%04x / 0x%04x\n", __func__,
+ sig_reading, *signal_strength);
+
+ return 0;
+}
+
+/* calculate DS3000 snr value in dB */
+static int ds3000_read_snr(struct dvb_frontend *fe, u16 *snr)
+{
+ struct ds3000_state *state = fe->demodulator_priv;
+ struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+ u8 snr_reading, snr_value;
+ u32 dvbs2_signal_reading, dvbs2_noise_reading, tmp;
+ static const u16 dvbs_snr_tab[] = { /* 20 x Table (rounded up) */
+ 0x0000, 0x1b13, 0x2aea, 0x3627, 0x3ede, 0x45fe, 0x4c03,
+ 0x513a, 0x55d4, 0x59f2, 0x5dab, 0x6111, 0x6431, 0x6717,
+ 0x69c9, 0x6c4e, 0x6eac, 0x70e8, 0x7304, 0x7505
+ };
+ static const u16 dvbs2_snr_tab[] = { /* 80 x Table (rounded up) */
+ 0x0000, 0x0bc2, 0x12a3, 0x1785, 0x1b4e, 0x1e65, 0x2103,
+ 0x2347, 0x2546, 0x2710, 0x28ae, 0x2a28, 0x2b83, 0x2cc5,
+ 0x2df1, 0x2f09, 0x3010, 0x3109, 0x31f4, 0x32d2, 0x33a6,
+ 0x3470, 0x3531, 0x35ea, 0x369b, 0x3746, 0x37ea, 0x3888,
+ 0x3920, 0x39b3, 0x3a42, 0x3acc, 0x3b51, 0x3bd3, 0x3c51,
+ 0x3ccb, 0x3d42, 0x3db6, 0x3e27, 0x3e95, 0x3f00, 0x3f68,
+ 0x3fcf, 0x4033, 0x4094, 0x40f4, 0x4151, 0x41ac, 0x4206,
+ 0x425e, 0x42b4, 0x4308, 0x435b, 0x43ac, 0x43fc, 0x444a,
+ 0x4497, 0x44e2, 0x452d, 0x4576, 0x45bd, 0x4604, 0x4649,
+ 0x468e, 0x46d1, 0x4713, 0x4755, 0x4795, 0x47d4, 0x4813,
+ 0x4851, 0x488d, 0x48c9, 0x4904, 0x493f, 0x4978, 0x49b1,
+ 0x49e9, 0x4a20, 0x4a57
+ };
+
+ dprintk("%s()\n", __func__);
+
+ switch (c->delivery_system) {
+ case SYS_DVBS:
+ snr_reading = ds3000_readreg(state, 0xff);
+ snr_reading /= 8;
+ if (snr_reading == 0)
+ *snr = 0x0000;
+ else {
+ if (snr_reading > 20)
+ snr_reading = 20;
+ snr_value = dvbs_snr_tab[snr_reading - 1] * 10 / 23026;
+ /* cook the value to be suitable for szap-s2
+ human readable output */
+ *snr = snr_value * 8 * 655;
+ }
+ dprintk("%s: raw / cooked = 0x%02x / 0x%04x\n", __func__,
+ snr_reading, *snr);
+ break;
+ case SYS_DVBS2:
+ dvbs2_noise_reading = (ds3000_readreg(state, 0x8c) & 0x3f) +
+ (ds3000_readreg(state, 0x8d) << 4);
+ dvbs2_signal_reading = ds3000_readreg(state, 0x8e);
+ tmp = dvbs2_signal_reading * dvbs2_signal_reading >> 1;
+ if (dvbs2_signal_reading == 0) {
+ *snr = 0x0000;
+ return 0;
+ }
+ if (dvbs2_noise_reading == 0) {
+ snr_value = 0x0013;
+ /* cook the value to be suitable for szap-s2
+ human readable output */
+ *snr = 0xffff;
+ return 0;
+ }
+ if (tmp > dvbs2_noise_reading) {
+ snr_reading = tmp / dvbs2_noise_reading;
+ if (snr_reading > 80)
+ snr_reading = 80;
+ snr_value = dvbs2_snr_tab[snr_reading - 1] / 1000;
+ /* cook the value to be suitable for szap-s2
+ human readable output */
+ *snr = snr_value * 5 * 655;
+ } else {
+ snr_reading = dvbs2_noise_reading / tmp;
+ if (snr_reading > 80)
+ snr_reading = 80;
+ *snr = -(dvbs2_snr_tab[snr_reading] / 1000);
+ }
+ dprintk("%s: raw / cooked = 0x%02x / 0x%04x\n", __func__,
+ snr_reading, *snr);
+ break;
+ default:
+ return 1;
+ }
+
+ return 0;
+}
+
+/* read DS3000 uncorrected blocks */
+static int ds3000_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
+{
+ struct ds3000_state *state = fe->demodulator_priv;
+ struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+ u8 data;
+ u16 _ucblocks;
+
+ dprintk("%s()\n", __func__);
+
+ switch (c->delivery_system) {
+ case SYS_DVBS:
+ *ucblocks = (ds3000_readreg(state, 0xf5) << 8) |
+ ds3000_readreg(state, 0xf4);
+ data = ds3000_readreg(state, 0xf8);
+ /* clear packet counters */
+ data &= ~0x20;
+ ds3000_writereg(state, 0xf8, data);
+ /* enable packet counters */
+ data |= 0x20;
+ ds3000_writereg(state, 0xf8, data);
+ break;
+ case SYS_DVBS2:
+ _ucblocks = (ds3000_readreg(state, 0xe2) << 8) |
+ ds3000_readreg(state, 0xe1);
+ if (_ucblocks > state->prevUCBS2)
+ *ucblocks = _ucblocks - state->prevUCBS2;
+ else
+ *ucblocks = state->prevUCBS2 - _ucblocks;
+ state->prevUCBS2 = _ucblocks;
+ break;
+ default:
+ return 1;
+ }
+
+ return 0;
+}
+
+/* Overwrite the current tuning params, we are about to tune */
+static void ds3000_clone_params(struct dvb_frontend *fe)
+{
+ struct ds3000_state *state = fe->demodulator_priv;
+ memcpy(&state->dcur, &state->dnxt, sizeof(state->dcur));
+}
+
+static int ds3000_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone)
+{
+ struct ds3000_state *state = fe->demodulator_priv;
+ u8 data;
+
+ dprintk("%s(%d)\n", __func__, tone);
+ if ((tone != SEC_TONE_ON) && (tone != SEC_TONE_OFF)) {
+ printk(KERN_ERR "%s: Invalid, tone=%d\n", __func__, tone);
+ return -EINVAL;
+ }
+
+ data = ds3000_readreg(state, 0xa2);
+ data &= ~0xc0;
+ ds3000_writereg(state, 0xa2, data);
+
+ switch (tone) {
+ case SEC_TONE_ON:
+ dprintk("%s: setting tone on\n", __func__);
+ data = ds3000_readreg(state, 0xa1);
+ data &= ~0x43;
+ data |= 0x04;
+ ds3000_writereg(state, 0xa1, data);
+ break;
+ case SEC_TONE_OFF:
+ dprintk("%s: setting tone off\n", __func__);
+ data = ds3000_readreg(state, 0xa2);
+ data |= 0x80;
+ ds3000_writereg(state, 0xa2, data);
+ break;
+ }
+
+ return 0;
+}
+
+static int ds3000_send_diseqc_msg(struct dvb_frontend *fe,
+ struct dvb_diseqc_master_cmd *d)
+{
+ struct ds3000_state *state = fe->demodulator_priv;
+ int i;
+ u8 data;
+
+ /* Dump DiSEqC message */
+ dprintk("%s(", __func__);
+ for (i = 0 ; i < d->msg_len;) {
+ dprintk("0x%02x", d->msg[i]);
+ if (++i < d->msg_len)
+ dprintk(", ");
+ }
+
+ /* enable DiSEqC message send pin */
+ data = ds3000_readreg(state, 0xa2);
+ data &= ~0xc0;
+ ds3000_writereg(state, 0xa2, data);
+
+ /* DiSEqC message */
+ for (i = 0; i < d->msg_len; i++)
+ ds3000_writereg(state, 0xa3 + i, d->msg[i]);
+
+ data = ds3000_readreg(state, 0xa1);
+ /* clear DiSEqC message length and status,
+ enable DiSEqC message send */
+ data &= ~0xf8;
+ /* set DiSEqC mode, modulation active during 33 pulses,
+ set DiSEqC message length */
+ data |= ((d->msg_len - 1) << 3) | 0x07;
+ ds3000_writereg(state, 0xa1, data);
+
+ /* wait up to 150ms for DiSEqC transmission to complete */
+ for (i = 0; i < 15; i++) {
+ data = ds3000_readreg(state, 0xa1);
+ if ((data & 0x40) == 0)
+ break;
+ msleep(10);
+ }
+
+ /* DiSEqC timeout after 150ms */
+ if (i == 15) {
+ data = ds3000_readreg(state, 0xa1);
+ data &= ~0x80;
+ data |= 0x40;
+ ds3000_writereg(state, 0xa1, data);
+
+ data = ds3000_readreg(state, 0xa2);
+ data &= ~0xc0;
+ data |= 0x80;
+ ds3000_writereg(state, 0xa2, data);
+
+ return 1;
+ }
+
+ data = ds3000_readreg(state, 0xa2);
+ data &= ~0xc0;
+ data |= 0x80;
+ ds3000_writereg(state, 0xa2, data);
+
+ return 0;
+}
+
+/* Send DiSEqC burst */
+static int ds3000_diseqc_send_burst(struct dvb_frontend *fe,
+ fe_sec_mini_cmd_t burst)
+{
+ struct ds3000_state *state = fe->demodulator_priv;
+ int i;
+ u8 data;
+
+ dprintk("%s()\n", __func__);
+
+ data = ds3000_readreg(state, 0xa2);
+ data &= ~0xc0;
+ ds3000_writereg(state, 0xa2, data);
+
+ /* DiSEqC burst */
+ if (burst == SEC_MINI_A)
+ /* Unmodulated tone burst */
+ ds3000_writereg(state, 0xa1, 0x02);
+ else if (burst == SEC_MINI_B)
+ /* Modulated tone burst */
+ ds3000_writereg(state, 0xa1, 0x01);
+ else
+ return -EINVAL;
+
+ msleep(13);
+ for (i = 0; i < 5; i++) {
+ data = ds3000_readreg(state, 0xa1);
+ if ((data & 0x40) == 0)
+ break;
+ msleep(1);
+ }
+
+ if (i == 5) {
+ data = ds3000_readreg(state, 0xa1);
+ data &= ~0x80;
+ data |= 0x40;
+ ds3000_writereg(state, 0xa1, data);
+
+ data = ds3000_readreg(state, 0xa2);
+ data &= ~0xc0;
+ data |= 0x80;
+ ds3000_writereg(state, 0xa2, data);
+
+ return 1;
+ }
+
+ data = ds3000_readreg(state, 0xa2);
+ data &= ~0xc0;
+ data |= 0x80;
+ ds3000_writereg(state, 0xa2, data);
+
+ return 0;
+}
+
+static void ds3000_release(struct dvb_frontend *fe)
+{
+ struct ds3000_state *state = fe->demodulator_priv;
+ dprintk("%s\n", __func__);
+ kfree(state);
+}
+
+static struct dvb_frontend_ops ds3000_ops;
+
+struct dvb_frontend *ds3000_attach(const struct ds3000_config *config,
+ struct i2c_adapter *i2c)
+{
+ struct ds3000_state *state = NULL;
+ int ret;
+
+ dprintk("%s\n", __func__);
+
+ /* allocate memory for the internal state */
+ state = kmalloc(sizeof(struct ds3000_state), GFP_KERNEL);
+ if (state == NULL) {
+ printk(KERN_ERR "Unable to kmalloc\n");
+ goto error2;
+ }
+
+ /* setup the state */
+ memset(state, 0, sizeof(struct ds3000_state));
+
+ state->config = config;
+ state->i2c = i2c;
+ state->prevUCBS2 = 0;
+
+ /* check if the demod is present */
+ ret = ds3000_readreg(state, 0x00) & 0xfe;
+ if (ret != 0xe0) {
+ printk(KERN_ERR "Invalid probe, probably not a DS3000\n");
+ goto error3;
+ }
+
+ printk(KERN_INFO "DS3000 chip version: %d.%d attached.\n",
+ ds3000_readreg(state, 0x02),
+ ds3000_readreg(state, 0x01));
+
+ memcpy(&state->frontend.ops, &ds3000_ops,
+ sizeof(struct dvb_frontend_ops));
+ state->frontend.demodulator_priv = state;
+ return &state->frontend;
+
+error3:
+ kfree(state);
+error2:
+ return NULL;
+}
+EXPORT_SYMBOL(ds3000_attach);
+
+static int ds3000_set_property(struct dvb_frontend *fe,
+ struct dtv_property *tvp)
+{
+ dprintk("%s(..)\n", __func__);
+ return 0;
+}
+
+static int ds3000_get_property(struct dvb_frontend *fe,
+ struct dtv_property *tvp)
+{
+ dprintk("%s(..)\n", __func__);
+ return 0;
+}
+
+static int ds3000_tune(struct dvb_frontend *fe,
+ struct dvb_frontend_parameters *p)
+{
+ struct ds3000_state *state = fe->demodulator_priv;
+ struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+
+ int ret = 0, retune, i;
+ u8 status, mlpf, mlpf_new, mlpf_max, mlpf_min, nlpf;
+ u16 value, ndiv;
+ u32 f3db;
+
+ dprintk("%s() ", __func__);
+
+ /* Load the firmware if required */
+ ret = ds3000_firmware_ondemand(fe);
+ if (ret != 0) {
+ printk(KERN_ERR "%s: Unable initialise the firmware\n",
+ __func__);
+ return ret;
+ }
+
+ state->dnxt.delivery = c->modulation;
+ state->dnxt.frequency = c->frequency;
+ state->dnxt.rolloff = 2; /* fixme */
+ state->dnxt.fec = c->fec_inner;
+
+ ret = ds3000_set_inversion(state, p->inversion);
+ if (ret != 0)
+ return ret;
+
+ ret = ds3000_set_symbolrate(state, c->symbol_rate);
+ if (ret != 0)
+ return ret;
+
+ /* discard the 'current' tuning parameters and prepare to tune */
+ ds3000_clone_params(fe);
+
+ retune = 1; /* try 1 times */
+ dprintk("%s: retune = %d\n", __func__, retune);
+ dprintk("%s: frequency = %d\n", __func__, state->dcur.frequency);
+ dprintk("%s: symbol_rate = %d\n", __func__, state->dcur.symbol_rate);
+ dprintk("%s: FEC = %d \n", __func__,
+ state->dcur.fec);
+ dprintk("%s: Inversion = %d\n", __func__, state->dcur.inversion);
+
+ do {
+ /* Reset status register */
+ status = 0;
+ /* Tune */
+ /* TS2020 init */
+ ds3000_tuner_writereg(state, 0x42, 0x73);
+ ds3000_tuner_writereg(state, 0x05, 0x01);
+ ds3000_tuner_writereg(state, 0x62, 0xf5);
+ /* unknown */
+ ds3000_tuner_writereg(state, 0x07, 0x02);
+ ds3000_tuner_writereg(state, 0x10, 0x00);
+ ds3000_tuner_writereg(state, 0x60, 0x79);
+ ds3000_tuner_writereg(state, 0x08, 0x01);
+ ds3000_tuner_writereg(state, 0x00, 0x01);
+ /* calculate and set freq divider */
+ if (state->dcur.frequency < 1146000) {
+ ds3000_tuner_writereg(state, 0x10, 0x11);
+ ndiv = ((state->dcur.frequency * (6 + 8) * 4) +
+ (DS3000_XTAL_FREQ / 2)) /
+ DS3000_XTAL_FREQ - 1024;
+ } else {
+ ds3000_tuner_writereg(state, 0x10, 0x01);
+ ndiv = ((state->dcur.frequency * (6 + 8) * 2) +
+ (DS3000_XTAL_FREQ / 2)) /
+ DS3000_XTAL_FREQ - 1024;
+ }
+
+ ds3000_tuner_writereg(state, 0x01, (ndiv & 0x0f00) >> 8);
+ ds3000_tuner_writereg(state, 0x02, ndiv & 0x00ff);
+
+ /* set pll */
+ ds3000_tuner_writereg(state, 0x03, 0x06);
+ ds3000_tuner_writereg(state, 0x51, 0x0f);
+ ds3000_tuner_writereg(state, 0x51, 0x1f);
+ ds3000_tuner_writereg(state, 0x50, 0x10);
+ ds3000_tuner_writereg(state, 0x50, 0x00);
+ msleep(5);
+
+ /* unknown */
+ ds3000_tuner_writereg(state, 0x51, 0x17);
+ ds3000_tuner_writereg(state, 0x51, 0x1f);
+ ds3000_tuner_writereg(state, 0x50, 0x08);
+ ds3000_tuner_writereg(state, 0x50, 0x00);
+ msleep(5);
+
+ value = ds3000_tuner_readreg(state, 0x3d);
+ value &= 0x0f;
+ if ((value > 4) && (value < 15)) {
+ value -= 3;
+ if (value < 4)
+ value = 4;
+ value = ((value << 3) | 0x01) & 0x79;
+ }
+
+ ds3000_tuner_writereg(state, 0x60, value);
+ ds3000_tuner_writereg(state, 0x51, 0x17);
+ ds3000_tuner_writereg(state, 0x51, 0x1f);
+ ds3000_tuner_writereg(state, 0x50, 0x08);
+ ds3000_tuner_writereg(state, 0x50, 0x00);
+
+ /* set low-pass filter period */
+ ds3000_tuner_writereg(state, 0x04, 0x2e);
+ ds3000_tuner_writereg(state, 0x51, 0x1b);
+ ds3000_tuner_writereg(state, 0x51, 0x1f);
+ ds3000_tuner_writereg(state, 0x50, 0x04);
+ ds3000_tuner_writereg(state, 0x50, 0x00);
+ msleep(5);
+
+ f3db = ((state->dcur.symbol_rate / 1000) << 2) / 5 + 2000;
+ if ((state->dcur.symbol_rate / 1000) < 5000)
+ f3db += 3000;
+ if (f3db < 7000)
+ f3db = 7000;
+ if (f3db > 40000)
+ f3db = 40000;
+
+ /* set low-pass filter baseband */
+ value = ds3000_tuner_readreg(state, 0x26);
+ mlpf = 0x2e * 207 / ((value << 1) + 151);
+ mlpf_max = mlpf * 135 / 100;
+ mlpf_min = mlpf * 78 / 100;
+ if (mlpf_max > 63)
+ mlpf_max = 63;
+
+ /* rounded to the closest integer */
+ nlpf = ((mlpf * f3db * 1000) + (2766 * DS3000_XTAL_FREQ / 2))
+ / (2766 * DS3000_XTAL_FREQ);
+ if (nlpf > 23)
+ nlpf = 23;
+ if (nlpf < 1)
+ nlpf = 1;
+
+ /* rounded to the closest integer */
+ mlpf_new = ((DS3000_XTAL_FREQ * nlpf * 2766) +
+ (1000 * f3db / 2)) / (1000 * f3db);
+
+ if (mlpf_new < mlpf_min) {
+ nlpf++;
+ mlpf_new = ((DS3000_XTAL_FREQ * nlpf * 2766) +
+ (1000 * f3db / 2)) / (1000 * f3db);
+ }
+
+ if (mlpf_new > mlpf_max)
+ mlpf_new = mlpf_max;
+
+ ds3000_tuner_writereg(state, 0x04, mlpf_new);
+ ds3000_tuner_writereg(state, 0x06, nlpf);
+ ds3000_tuner_writereg(state, 0x51, 0x1b);
+ ds3000_tuner_writereg(state, 0x51, 0x1f);
+ ds3000_tuner_writereg(state, 0x50, 0x04);
+ ds3000_tuner_writereg(state, 0x50, 0x00);
+ msleep(5);
+
+ /* unknown */
+ ds3000_tuner_writereg(state, 0x51, 0x1e);
+ ds3000_tuner_writereg(state, 0x51, 0x1f);
+ ds3000_tuner_writereg(state, 0x50, 0x01);
+ ds3000_tuner_writereg(state, 0x50, 0x00);
+ msleep(60);
+
+ /* ds3000 global reset */
+ ds3000_writereg(state, 0x07, 0x80);
+ ds3000_writereg(state, 0x07, 0x00);
+ /* ds3000 build-in uC reset */
+ ds3000_writereg(state, 0xb2, 0x01);
+ /* ds3000 software reset */
+ ds3000_writereg(state, 0x00, 0x01);
+
+ switch (c->delivery_system) {
+ case SYS_DVBS:
+ /* initialise the demod in DVB-S mode */
+ for (i = 0; i < sizeof(ds3000_dvbs_init_tab); i += 2)
+ ds3000_writereg(state,
+ ds3000_dvbs_init_tab[i],
+ ds3000_dvbs_init_tab[i + 1]);
+ value = ds3000_readreg(state, 0xfe);
+ value &= 0xc0;
+ value |= 0x1b;
+ ds3000_writereg(state, 0xfe, value);
+ break;
+ case SYS_DVBS2:
+ /* initialise the demod in DVB-S2 mode */
+ for (i = 0; i < sizeof(ds3000_dvbs2_init_tab); i += 2)
+ ds3000_writereg(state,
+ ds3000_dvbs2_init_tab[i],
+ ds3000_dvbs2_init_tab[i + 1]);
+ ds3000_writereg(state, 0xfe, 0x54);
+ break;
+ default:
+ return 1;
+ }
+
+ /* enable 27MHz clock output */
+ ds3000_writereg(state, 0x29, 0x80);
+ /* enable ac coupling */
+ ds3000_writereg(state, 0x25, 0x8a);
+
+ /* enhance symbol rate performance */
+ if ((state->dcur.symbol_rate / 1000) <= 5000) {
+ value = 29777 / (state->dcur.symbol_rate / 1000) + 1;
+ if (value % 2 != 0)
+ value++;
+ ds3000_writereg(state, 0xc3, 0x0d);
+ ds3000_writereg(state, 0xc8, value);
+ ds3000_writereg(state, 0xc4, 0x10);
+ ds3000_writereg(state, 0xc7, 0x0e);
+ } else if ((state->dcur.symbol_rate / 1000) <= 10000) {
+ value = 92166 / (state->dcur.symbol_rate / 1000) + 1;
+ if (value % 2 != 0)
+ value++;
+ ds3000_writereg(state, 0xc3, 0x07);
+ ds3000_writereg(state, 0xc8, value);
+ ds3000_writereg(state, 0xc4, 0x09);
+ ds3000_writereg(state, 0xc7, 0x12);
+ } else if ((state->dcur.symbol_rate / 1000) <= 20000) {
+ value = 64516 / (state->dcur.symbol_rate / 1000) + 1;
+ ds3000_writereg(state, 0xc3, value);
+ ds3000_writereg(state, 0xc8, 0x0e);
+ ds3000_writereg(state, 0xc4, 0x07);
+ ds3000_writereg(state, 0xc7, 0x18);
+ } else {
+ value = 129032 / (state->dcur.symbol_rate / 1000) + 1;
+ ds3000_writereg(state, 0xc3, value);
+ ds3000_writereg(state, 0xc8, 0x0a);
+ ds3000_writereg(state, 0xc4, 0x05);
+ ds3000_writereg(state, 0xc7, 0x24);
+ }
+
+ /* normalized symbol rate rounded to the closest integer */
+ value = (((state->dcur.symbol_rate / 1000) << 16) +
+ (DS3000_SAMPLE_RATE / 2)) / DS3000_SAMPLE_RATE;
+ ds3000_writereg(state, 0x61, value & 0x00ff);
+ ds3000_writereg(state, 0x62, (value & 0xff00) >> 8);
+
+ /* co-channel interference cancellation disabled */
+ ds3000_writereg(state, 0x56, 0x00);
+
+ /* equalizer disabled */
+ ds3000_writereg(state, 0x76, 0x00);
+
+ /*ds3000_writereg(state, 0x08, 0x03);
+ ds3000_writereg(state, 0xfd, 0x22);
+ ds3000_writereg(state, 0x08, 0x07);
+ ds3000_writereg(state, 0xfd, 0x42);
+ ds3000_writereg(state, 0x08, 0x07);*/
+
+ /* ds3000 out of software reset */
+ ds3000_writereg(state, 0x00, 0x00);
+ /* start ds3000 build-in uC */
+ ds3000_writereg(state, 0xb2, 0x00);
+
+ /* TODO: calculate and set carrier offset */
+
+ /* wait before retrying */
+ for (i = 0; i < 30 ; i++) {
+ if (ds3000_is_tuned(fe)) {
+ dprintk("%s: Tuned\n", __func__);
+ ds3000_dump_registers(fe);
+ goto tuned;
+ }
+ msleep(1);
+ }
+
+ dprintk("%s: Not tuned\n", __func__);
+ ds3000_dump_registers(fe);
+
+ } while (--retune);
+
+tuned:
+ return ret;
+}
+
+static enum dvbfe_algo ds3000_get_algo(struct dvb_frontend *fe)
+{
+ dprintk("%s()\n", __func__);
+ return DVBFE_ALGO_SW;
+}
+
+/*
+ * Initialise or wake up device
+ *
+ * Power config will reset and load initial firmware if required
+ */
+static int ds3000_initfe(struct dvb_frontend *fe)
+{
+ dprintk("%s()\n", __func__);
+ return 0;
+}
+
+/* Put device to sleep */
+static int ds3000_sleep(struct dvb_frontend *fe)
+{
+ dprintk("%s()\n", __func__);
+ return 0;
+}
+
+static struct dvb_frontend_ops ds3000_ops = {
+
+ .info = {
+ .name = "Montage Technology DS3000/TS2020",
+ .type = FE_QPSK,
+ .frequency_min = 950000,
+ .frequency_max = 2150000,
+ .frequency_stepsize = 1011, /* kHz for QPSK frontends */
+ .frequency_tolerance = 5000,
+ .symbol_rate_min = 1000000,
+ .symbol_rate_max = 45000000,
+ .caps = FE_CAN_INVERSION_AUTO |
+ FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
+ FE_CAN_FEC_4_5 | FE_CAN_FEC_5_6 | FE_CAN_FEC_6_7 |
+ FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
+ FE_CAN_2G_MODULATION |
+ FE_CAN_QPSK | FE_CAN_RECOVER
+ },
+
+ .release = ds3000_release,
+
+ .init = ds3000_initfe,
+ .sleep = ds3000_sleep,
+ .read_status = ds3000_read_status,
+ .read_ber = ds3000_read_ber,
+ .read_signal_strength = ds3000_read_signal_strength,
+ .read_snr = ds3000_read_snr,
+ .read_ucblocks = ds3000_read_ucblocks,
+ .set_tone = ds3000_set_tone,
+ .diseqc_send_master_cmd = ds3000_send_diseqc_msg,
+ .diseqc_send_burst = ds3000_diseqc_send_burst,
+ .get_frontend_algo = ds3000_get_algo,
+
+ .set_property = ds3000_set_property,
+ .get_property = ds3000_get_property,
+ .set_frontend = ds3000_tune,
+};
+
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Activates frontend debugging (default:0)");
+
+MODULE_DESCRIPTION("DVB Frontend module for Montage Technology "
+ "DS3000/TS2020 hardware");
+MODULE_AUTHOR("Konstantin Dimitrov");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/ds3000.h b/drivers/media/dvb/frontends/ds3000.h
new file mode 100644
index 0000000..67f6703
--- /dev/null
+++ b/drivers/media/dvb/frontends/ds3000.h
@@ -0,0 +1,45 @@
+/*
+ Montage Technology DS3000/TS2020 - DVBS/S2 Satellite demod/tuner driver
+ Copyright (C) 2009 Konstantin Dimitrov <kosio.dimitrov@gmail.com>
+
+ Copyright (C) 2009 TurboSight.com
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef DS3000_H
+#define DS3000_H
+
+#include <linux/dvb/frontend.h>
+
+struct ds3000_config {
+ /* the demodulator's i2c address */
+ u8 demod_address;
+};
+
+#if defined(CONFIG_DVB_DS3000) || \
+ (defined(CONFIG_DVB_DS3000_MODULE) && defined(MODULE))
+extern struct dvb_frontend *ds3000_attach(const struct ds3000_config *config,
+ struct i2c_adapter *i2c);
+#else
+static inline
+struct dvb_frontend *ds3000_attach(const struct ds3000_config *config,
+ struct i2c_adapter *i2c)
+{
+ printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+ return NULL;
+}
+#endif /* CONFIG_DVB_DS3000 */
+#endif /* DS3000_H */
diff --git a/drivers/media/dvb/frontends/ec100.c b/drivers/media/dvb/frontends/ec100.c
new file mode 100644
index 0000000..2414dc6
--- /dev/null
+++ b/drivers/media/dvb/frontends/ec100.c
@@ -0,0 +1,335 @@
+/*
+ * E3C EC100 demodulator driver
+ *
+ * Copyright (C) 2009 Antti Palosaari <crope@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include "dvb_frontend.h"
+#include "ec100_priv.h"
+#include "ec100.h"
+
+int ec100_debug;
+module_param_named(debug, ec100_debug, int, 0644);
+MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
+
+struct ec100_state {
+ struct i2c_adapter *i2c;
+ struct dvb_frontend frontend;
+ struct ec100_config config;
+
+ u16 ber;
+};
+
+/* write single register */
+static int ec100_write_reg(struct ec100_state *state, u8 reg, u8 val)
+{
+ u8 buf[2] = {reg, val};
+ struct i2c_msg msg = {
+ .addr = state->config.demod_address,
+ .flags = 0,
+ .len = 2,
+ .buf = buf};
+
+ if (i2c_transfer(state->i2c, &msg, 1) != 1) {
+ warn("I2C write failed reg:%02x", reg);
+ return -EREMOTEIO;
+ }
+ return 0;
+}
+
+/* read single register */
+static int ec100_read_reg(struct ec100_state *state, u8 reg, u8 *val)
+{
+ struct i2c_msg msg[2] = {
+ {
+ .addr = state->config.demod_address,
+ .flags = 0,
+ .len = 1,
+ .buf = ®
+ }, {
+ .addr = state->config.demod_address,
+ .flags = I2C_M_RD,
+ .len = 1,
+ .buf = val
+ }
+ };
+
+ if (i2c_transfer(state->i2c, msg, 2) != 2) {
+ warn("I2C read failed reg:%02x", reg);
+ return -EREMOTEIO;
+ }
+ return 0;
+}
+
+static int ec100_set_frontend(struct dvb_frontend *fe,
+ struct dvb_frontend_parameters *params)
+{
+ struct ec100_state *state = fe->demodulator_priv;
+ int ret;
+ u8 tmp, tmp2;
+
+ deb_info("%s: freq:%d bw:%d\n", __func__, params->frequency,
+ params->u.ofdm.bandwidth);
+
+ /* program tuner */
+ if (fe->ops.tuner_ops.set_params)
+ fe->ops.tuner_ops.set_params(fe, params);
+
+ ret = ec100_write_reg(state, 0x04, 0x06);
+ if (ret)
+ goto error;
+ ret = ec100_write_reg(state, 0x67, 0x58);
+ if (ret)
+ goto error;
+ ret = ec100_write_reg(state, 0x05, 0x18);
+ if (ret)
+ goto error;
+
+ /* reg/bw | 6 | 7 | 8
+ -------+------+------+------
+ A 0x1b | 0xa1 | 0xe7 | 0x2c
+ A 0x1c | 0x55 | 0x63 | 0x72
+ -------+------+------+------
+ B 0x1b | 0xb7 | 0x00 | 0x49
+ B 0x1c | 0x55 | 0x64 | 0x72 */
+
+ switch (params->u.ofdm.bandwidth) {
+ case BANDWIDTH_6_MHZ:
+ tmp = 0xb7;
+ tmp2 = 0x55;
+ break;
+ case BANDWIDTH_7_MHZ:
+ tmp = 0x00;
+ tmp2 = 0x64;
+ break;
+ case BANDWIDTH_8_MHZ:
+ default:
+ tmp = 0x49;
+ tmp2 = 0x72;
+ }
+
+ ret = ec100_write_reg(state, 0x1b, tmp);
+ if (ret)
+ goto error;
+ ret = ec100_write_reg(state, 0x1c, tmp2);
+ if (ret)
+ goto error;
+
+ ret = ec100_write_reg(state, 0x0c, 0xbb); /* if freq */
+ if (ret)
+ goto error;
+ ret = ec100_write_reg(state, 0x0d, 0x31); /* if freq */
+ if (ret)
+ goto error;
+
+ ret = ec100_write_reg(state, 0x08, 0x24);
+ if (ret)
+ goto error;
+
+ ret = ec100_write_reg(state, 0x00, 0x00); /* go */
+ if (ret)
+ goto error;
+ ret = ec100_write_reg(state, 0x00, 0x20); /* go */
+ if (ret)
+ goto error;
+
+ return ret;
+error:
+ deb_info("%s: failed:%d\n", __func__, ret);
+ return ret;
+}
+
+static int ec100_get_tune_settings(struct dvb_frontend *fe,
+ struct dvb_frontend_tune_settings *fesettings)
+{
+ fesettings->min_delay_ms = 300;
+ fesettings->step_size = 0;
+ fesettings->max_drift = 0;
+
+ return 0;
+}
+
+static int ec100_read_status(struct dvb_frontend *fe, fe_status_t *status)
+{
+ struct ec100_state *state = fe->demodulator_priv;
+ int ret;
+ u8 tmp;
+ *status = 0;
+
+ ret = ec100_read_reg(state, 0x42, &tmp);
+ if (ret)
+ goto error;
+
+ if (tmp & 0x80) {
+ /* bit7 set - have lock */
+ *status |= FE_HAS_SIGNAL | FE_HAS_CARRIER | FE_HAS_VITERBI |
+ FE_HAS_SYNC | FE_HAS_LOCK;
+ } else {
+ ret = ec100_read_reg(state, 0x01, &tmp);
+ if (ret)
+ goto error;
+
+ if (tmp & 0x10) {
+ /* bit4 set - have signal */
+ *status |= FE_HAS_SIGNAL;
+ if (!(tmp & 0x01)) {
+ /* bit0 clear - have ~valid signal */
+ *status |= FE_HAS_CARRIER | FE_HAS_VITERBI;
+ }
+ }
+ }
+
+ return ret;
+error:
+ deb_info("%s: failed:%d\n", __func__, ret);
+ return ret;
+}
+
+static int ec100_read_ber(struct dvb_frontend *fe, u32 *ber)
+{
+ struct ec100_state *state = fe->demodulator_priv;
+ int ret;
+ u8 tmp, tmp2;
+ u16 ber2;
+
+ *ber = 0;
+
+ ret = ec100_read_reg(state, 0x65, &tmp);
+ if (ret)
+ goto error;
+ ret = ec100_read_reg(state, 0x66, &tmp2);
+ if (ret)
+ goto error;
+
+ ber2 = (tmp2 << 8) | tmp;
+
+ /* if counter overflow or clear */
+ if (ber2 < state->ber)
+ *ber = ber2;
+ else
+ *ber = ber2 - state->ber;
+
+ state->ber = ber2;
+
+ return ret;
+error:
+ deb_info("%s: failed:%d\n", __func__, ret);
+ return ret;
+}
+
+static int ec100_read_signal_strength(struct dvb_frontend *fe, u16 *strength)
+{
+ struct ec100_state *state = fe->demodulator_priv;
+ int ret;
+ u8 tmp;
+
+ ret = ec100_read_reg(state, 0x24, &tmp);
+ if (ret) {
+ *strength = 0;
+ goto error;
+ }
+
+ *strength = ((tmp << 8) | tmp);
+
+ return ret;
+error:
+ deb_info("%s: failed:%d\n", __func__, ret);
+ return ret;
+}
+
+static int ec100_read_snr(struct dvb_frontend *fe, u16 *snr)
+{
+ *snr = 0;
+ return 0;
+}
+
+static int ec100_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
+{
+ *ucblocks = 0;
+ return 0;
+}
+
+static void ec100_release(struct dvb_frontend *fe)
+{
+ struct ec100_state *state = fe->demodulator_priv;
+ kfree(state);
+}
+
+static struct dvb_frontend_ops ec100_ops;
+
+struct dvb_frontend *ec100_attach(const struct ec100_config *config,
+ struct i2c_adapter *i2c)
+{
+ int ret;
+ struct ec100_state *state = NULL;
+ u8 tmp;
+
+ /* allocate memory for the internal state */
+ state = kzalloc(sizeof(struct ec100_state), GFP_KERNEL);
+ if (state == NULL)
+ goto error;
+
+ /* setup the state */
+ state->i2c = i2c;
+ memcpy(&state->config, config, sizeof(struct ec100_config));
+
+ /* check if the demod is there */
+ ret = ec100_read_reg(state, 0x33, &tmp);
+ if (ret || tmp != 0x0b)
+ goto error;
+
+ /* create dvb_frontend */
+ memcpy(&state->frontend.ops, &ec100_ops,
+ sizeof(struct dvb_frontend_ops));
+ state->frontend.demodulator_priv = state;
+
+ return &state->frontend;
+error:
+ kfree(state);
+ return NULL;
+}
+EXPORT_SYMBOL(ec100_attach);
+
+static struct dvb_frontend_ops ec100_ops = {
+ .info = {
+ .name = "E3C EC100 DVB-T",
+ .type = FE_OFDM,
+ .caps =
+ FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
+ FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
+ FE_CAN_QPSK | FE_CAN_QAM_16 |
+ FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
+ FE_CAN_TRANSMISSION_MODE_AUTO |
+ FE_CAN_GUARD_INTERVAL_AUTO |
+ FE_CAN_HIERARCHY_AUTO |
+ FE_CAN_MUTE_TS
+ },
+
+ .release = ec100_release,
+ .set_frontend = ec100_set_frontend,
+ .get_tune_settings = ec100_get_tune_settings,
+ .read_status = ec100_read_status,
+ .read_ber = ec100_read_ber,
+ .read_signal_strength = ec100_read_signal_strength,
+ .read_snr = ec100_read_snr,
+ .read_ucblocks = ec100_read_ucblocks,
+};
+
+MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
+MODULE_DESCRIPTION("E3C EC100 DVB-T demodulator driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/ec100.h b/drivers/media/dvb/frontends/ec100.h
new file mode 100644
index 0000000..ee8e524
--- /dev/null
+++ b/drivers/media/dvb/frontends/ec100.h
@@ -0,0 +1,46 @@
+/*
+ * E3C EC100 demodulator driver
+ *
+ * Copyright (C) 2009 Antti Palosaari <crope@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#ifndef EC100_H
+#define EC100_H
+
+#include <linux/dvb/frontend.h>
+
+struct ec100_config {
+ /* demodulator's I2C address */
+ u8 demod_address;
+};
+
+
+#if defined(CONFIG_DVB_EC100) || \
+ (defined(CONFIG_DVB_EC100_MODULE) && defined(MODULE))
+extern struct dvb_frontend *ec100_attach(const struct ec100_config *config,
+ struct i2c_adapter *i2c);
+#else
+static inline struct dvb_frontend *ec100_attach(
+ const struct ec100_config *config, struct i2c_adapter *i2c)
+{
+ printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+ return NULL;
+}
+#endif
+
+#endif /* EC100_H */
diff --git a/drivers/media/dvb/frontends/ec100_priv.h b/drivers/media/dvb/frontends/ec100_priv.h
new file mode 100644
index 0000000..5c99014
--- /dev/null
+++ b/drivers/media/dvb/frontends/ec100_priv.h
@@ -0,0 +1,39 @@
+/*
+ * E3C EC100 demodulator driver
+ *
+ * Copyright (C) 2009 Antti Palosaari <crope@iki.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#ifndef EC100_PRIV
+#define EC100_PRIV
+
+#define LOG_PREFIX "ec100"
+
+#define dprintk(var, level, args...) \
+ do { if ((var & level)) printk(args); } while (0)
+
+#define deb_info(args...) dprintk(ec100_debug, 0x01, args)
+
+#undef err
+#define err(f, arg...) printk(KERN_ERR LOG_PREFIX": " f "\n" , ## arg)
+#undef info
+#define info(f, arg...) printk(KERN_INFO LOG_PREFIX": " f "\n" , ## arg)
+#undef warn
+#define warn(f, arg...) printk(KERN_WARNING LOG_PREFIX": " f "\n" , ## arg)
+
+#endif /* EC100_PRIV */
diff --git a/drivers/media/dvb/frontends/lgdt330x.c b/drivers/media/dvb/frontends/lgdt330x.c
index 056387b..43971e6 100644
--- a/drivers/media/dvb/frontends/lgdt330x.c
+++ b/drivers/media/dvb/frontends/lgdt330x.c
@@ -479,7 +479,7 @@
switch (state->current_modulation) {
case QAM_256:
case QAM_64:
- /* Need to undestand why there are 3 lock levels here */
+ /* Need to understand why there are 3 lock levels here */
if ((buf[0] & 0x07) == 0x07)
*status |= FE_HAS_CARRIER;
break;
@@ -520,7 +520,7 @@
switch (state->current_modulation) {
case QAM_256:
case QAM_64:
- /* Need to undestand why there are 3 lock levels here */
+ /* Need to understand why there are 3 lock levels here */
if ((buf[0] & 0x07) == 0x07)
*status |= FE_HAS_CARRIER;
else
diff --git a/drivers/media/dvb/frontends/s5h1409.c b/drivers/media/dvb/frontends/s5h1409.c
index fb30115..0e2f61a 100644
--- a/drivers/media/dvb/frontends/s5h1409.c
+++ b/drivers/media/dvb/frontends/s5h1409.c
@@ -44,7 +44,15 @@
int if_freq;
u32 is_qam_locked;
- u32 qam_state;
+
+ /* QAM tuning state goes through the following state transitions */
+#define QAM_STATE_UNTUNED 0
+#define QAM_STATE_TUNING_STARTED 1
+#define QAM_STATE_INTERLEAVE_SET 2
+#define QAM_STATE_QAM_OPTIMIZED_L1 3
+#define QAM_STATE_QAM_OPTIMIZED_L2 4
+#define QAM_STATE_QAM_OPTIMIZED_L3 5
+ u8 qam_state;
};
static int debug;
@@ -347,7 +355,7 @@
s5h1409_writereg(state, 0xf5, 0);
s5h1409_writereg(state, 0xf5, 1);
state->is_qam_locked = 0;
- state->qam_state = 0;
+ state->qam_state = QAM_STATE_UNTUNED;
return 0;
}
@@ -474,6 +482,59 @@
struct s5h1409_state *state = fe->demodulator_priv;
u16 reg;
+ if (state->qam_state < QAM_STATE_INTERLEAVE_SET) {
+ /* We should not perform amhum optimization until
+ the interleave mode has been configured */
+ return;
+ }
+
+ if (state->qam_state == QAM_STATE_QAM_OPTIMIZED_L3) {
+ /* We've already reached the maximum optimization level, so
+ dont bother banging on the status registers */
+ return;
+ }
+
+ /* QAM EQ lock check */
+ reg = s5h1409_readreg(state, 0xf0);
+
+ if ((reg >> 13) & 0x1) {
+ reg &= 0xff;
+
+ s5h1409_writereg(state, 0x96, 0x000c);
+ if (reg < 0x68) {
+ if (state->qam_state < QAM_STATE_QAM_OPTIMIZED_L3) {
+ dprintk("%s() setting QAM state to OPT_L3\n",
+ __func__);
+ s5h1409_writereg(state, 0x93, 0x3130);
+ s5h1409_writereg(state, 0x9e, 0x2836);
+ state->qam_state = QAM_STATE_QAM_OPTIMIZED_L3;
+ }
+ } else {
+ if (state->qam_state < QAM_STATE_QAM_OPTIMIZED_L2) {
+ dprintk("%s() setting QAM state to OPT_L2\n",
+ __func__);
+ s5h1409_writereg(state, 0x93, 0x3332);
+ s5h1409_writereg(state, 0x9e, 0x2c37);
+ state->qam_state = QAM_STATE_QAM_OPTIMIZED_L2;
+ }
+ }
+
+ } else {
+ if (state->qam_state < QAM_STATE_QAM_OPTIMIZED_L1) {
+ dprintk("%s() setting QAM state to OPT_L1\n", __func__);
+ s5h1409_writereg(state, 0x96, 0x0008);
+ s5h1409_writereg(state, 0x93, 0x3332);
+ s5h1409_writereg(state, 0x9e, 0x2c37);
+ state->qam_state = QAM_STATE_QAM_OPTIMIZED_L1;
+ }
+ }
+}
+
+static void s5h1409_set_qam_amhum_mode_legacy(struct dvb_frontend *fe)
+{
+ struct s5h1409_state *state = fe->demodulator_priv;
+ u16 reg;
+
if (state->is_qam_locked)
return;
@@ -506,6 +567,44 @@
struct s5h1409_state *state = fe->demodulator_priv;
u16 reg, reg1, reg2;
+ if (state->qam_state >= QAM_STATE_INTERLEAVE_SET) {
+ /* We've done the optimization already */
+ return;
+ }
+
+ reg = s5h1409_readreg(state, 0xf1);
+
+ /* Master lock */
+ if ((reg >> 15) & 0x1) {
+ if (state->qam_state == QAM_STATE_UNTUNED ||
+ state->qam_state == QAM_STATE_TUNING_STARTED) {
+ dprintk("%s() setting QAM state to INTERLEAVE_SET\n",
+ __func__);
+ reg1 = s5h1409_readreg(state, 0xb2);
+ reg2 = s5h1409_readreg(state, 0xad);
+
+ s5h1409_writereg(state, 0x96, 0x0020);
+ s5h1409_writereg(state, 0xad,
+ (((reg1 & 0xf000) >> 4) | (reg2 & 0xf0ff)));
+ state->qam_state = QAM_STATE_INTERLEAVE_SET;
+ }
+ } else {
+ if (state->qam_state == QAM_STATE_UNTUNED) {
+ dprintk("%s() setting QAM state to TUNING_STARTED\n",
+ __func__);
+ s5h1409_writereg(state, 0x96, 0x08);
+ s5h1409_writereg(state, 0xab,
+ s5h1409_readreg(state, 0xab) | 0x1001);
+ state->qam_state = QAM_STATE_TUNING_STARTED;
+ }
+ }
+}
+
+static void s5h1409_set_qam_interleave_mode_legacy(struct dvb_frontend *fe)
+{
+ struct s5h1409_state *state = fe->demodulator_priv;
+ u16 reg, reg1, reg2;
+
reg = s5h1409_readreg(state, 0xf1);
/* Master lock */
@@ -553,16 +652,24 @@
fe->ops.i2c_gate_ctrl(fe, 0);
}
- /* Optimize the demod for QAM */
- if (p->u.vsb.modulation != VSB_8) {
- s5h1409_set_qam_amhum_mode(fe);
- s5h1409_set_qam_interleave_mode(fe);
- }
-
/* Issue a reset to the demod so it knows to resync against the
newly tuned frequency */
s5h1409_softreset(fe);
+ /* Optimize the demod for QAM */
+ if (state->current_modulation != VSB_8) {
+ /* This almost certainly applies to all boards, but for now
+ only do it for the HVR-1600. Once the other boards are
+ tested, the "legacy" versions can just go away */
+ if (state->config->hvr1600_opt == S5H1409_HVR1600_OPTIMIZE) {
+ s5h1409_set_qam_interleave_mode(fe);
+ s5h1409_set_qam_amhum_mode(fe);
+ } else {
+ s5h1409_set_qam_amhum_mode_legacy(fe);
+ s5h1409_set_qam_interleave_mode_legacy(fe);
+ }
+ }
+
return 0;
}
@@ -614,6 +721,21 @@
/* The datasheet says that after initialisation, VSB is default */
state->current_modulation = VSB_8;
+ /* Optimize for the HVR-1600 if appropriate. Note that some of these
+ may get folded into the generic case after testing with other
+ devices */
+ if (state->config->hvr1600_opt == S5H1409_HVR1600_OPTIMIZE) {
+ /* VSB AGC REF */
+ s5h1409_writereg(state, 0x09, 0x0050);
+
+ /* Unknown but Windows driver does it... */
+ s5h1409_writereg(state, 0x21, 0x0001);
+ s5h1409_writereg(state, 0x50, 0x030e);
+
+ /* QAM AGC REF */
+ s5h1409_writereg(state, 0x82, 0x0800);
+ }
+
if (state->config->output_mode == S5H1409_SERIAL_OUTPUT)
s5h1409_writereg(state, 0xab,
s5h1409_readreg(state, 0xab) | 0x100); /* Serial */
@@ -641,6 +763,17 @@
*status = 0;
+ /* Optimize the demod for QAM */
+ if (state->current_modulation != VSB_8) {
+ /* This almost certainly applies to all boards, but for now
+ only do it for the HVR-1600. Once the other boards are
+ tested, the "legacy" versions can just go away */
+ if (state->config->hvr1600_opt == S5H1409_HVR1600_OPTIMIZE) {
+ s5h1409_set_qam_interleave_mode(fe);
+ s5h1409_set_qam_amhum_mode(fe);
+ }
+ }
+
/* Get the demodulator status */
reg = s5h1409_readreg(state, 0xf1);
if (reg & 0x1000)
diff --git a/drivers/media/dvb/frontends/s5h1409.h b/drivers/media/dvb/frontends/s5h1409.h
index 070d974..91f2ebd 100644
--- a/drivers/media/dvb/frontends/s5h1409.h
+++ b/drivers/media/dvb/frontends/s5h1409.h
@@ -57,6 +57,13 @@
#define S5H1409_MPEGTIMING_NONCONTINOUS_INVERTING_CLOCK 2
#define S5H1409_MPEGTIMING_NONCONTINOUS_NONINVERTING_CLOCK 3
u16 mpeg_timing;
+
+ /* HVR-1600 optimizations (to better work with MXL5005s)
+ Note: some of these are likely to be folded into the generic driver
+ after being regression tested with other boards */
+#define S5H1409_HVR1600_NOOPTIMIZE 0
+#define S5H1409_HVR1600_OPTIMIZE 1
+ u8 hvr1600_opt;
};
#if defined(CONFIG_DVB_S5H1409) || (defined(CONFIG_DVB_S5H1409_MODULE) \
diff --git a/drivers/media/dvb/frontends/stb0899_drv.c b/drivers/media/dvb/frontends/stb0899_drv.c
index a04c782..1570669 100644
--- a/drivers/media/dvb/frontends/stb0899_drv.c
+++ b/drivers/media/dvb/frontends/stb0899_drv.c
@@ -1571,7 +1571,7 @@
* stb0899_track
* periodically check the signal level against a specified
* threshold level and perform derotator centering.
- * called once we have a lock from a succesful search
+ * called once we have a lock from a successful search
* event.
*
* Will be called periodically called to maintain the
diff --git a/drivers/media/dvb/frontends/stb6100_proc.h b/drivers/media/dvb/frontends/stb6100_proc.h
new file mode 100644
index 0000000..112163a
--- /dev/null
+++ b/drivers/media/dvb/frontends/stb6100_proc.h
@@ -0,0 +1,138 @@
+/*
+ STB6100 Silicon Tuner wrapper
+ Copyright (C)2009 Igor M. Liplianin (liplianin@me.by)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+static int stb6100_get_freq(struct dvb_frontend *fe, u32 *frequency)
+{
+ struct dvb_frontend_ops *frontend_ops = NULL;
+ struct dvb_tuner_ops *tuner_ops = NULL;
+ struct tuner_state state;
+ int err = 0;
+
+ if (&fe->ops)
+ frontend_ops = &fe->ops;
+ if (&frontend_ops->tuner_ops)
+ tuner_ops = &frontend_ops->tuner_ops;
+ if (tuner_ops->get_state) {
+ if (frontend_ops->i2c_gate_ctrl)
+ frontend_ops->i2c_gate_ctrl(fe, 1);
+
+ err = tuner_ops->get_state(fe, DVBFE_TUNER_FREQUENCY, &state);
+ if (err < 0) {
+ printk(KERN_ERR "%s: Invalid parameter\n", __func__);
+ return err;
+ }
+
+ if (frontend_ops->i2c_gate_ctrl)
+ frontend_ops->i2c_gate_ctrl(fe, 0);
+
+ *frequency = state.frequency;
+ }
+
+ return 0;
+}
+
+static int stb6100_set_freq(struct dvb_frontend *fe, u32 frequency)
+{
+ struct dvb_frontend_ops *frontend_ops = NULL;
+ struct dvb_tuner_ops *tuner_ops = NULL;
+ struct tuner_state state;
+ int err = 0;
+
+ state.frequency = frequency;
+ if (&fe->ops)
+ frontend_ops = &fe->ops;
+ if (&frontend_ops->tuner_ops)
+ tuner_ops = &frontend_ops->tuner_ops;
+ if (tuner_ops->set_state) {
+ if (frontend_ops->i2c_gate_ctrl)
+ frontend_ops->i2c_gate_ctrl(fe, 1);
+
+ err = tuner_ops->set_state(fe, DVBFE_TUNER_FREQUENCY, &state);
+ if (err < 0) {
+ printk(KERN_ERR "%s: Invalid parameter\n", __func__);
+ return err;
+ }
+
+ if (frontend_ops->i2c_gate_ctrl)
+ frontend_ops->i2c_gate_ctrl(fe, 0);
+
+ }
+
+ return 0;
+}
+
+static int stb6100_get_bandw(struct dvb_frontend *fe, u32 *bandwidth)
+{
+ struct dvb_frontend_ops *frontend_ops = NULL;
+ struct dvb_tuner_ops *tuner_ops = NULL;
+ struct tuner_state state;
+ int err = 0;
+
+ if (&fe->ops)
+ frontend_ops = &fe->ops;
+ if (&frontend_ops->tuner_ops)
+ tuner_ops = &frontend_ops->tuner_ops;
+ if (tuner_ops->get_state) {
+ if (frontend_ops->i2c_gate_ctrl)
+ frontend_ops->i2c_gate_ctrl(fe, 1);
+
+ err = tuner_ops->get_state(fe, DVBFE_TUNER_BANDWIDTH, &state);
+ if (err < 0) {
+ printk(KERN_ERR "%s: Invalid parameter\n", __func__);
+ return err;
+ }
+
+ if (frontend_ops->i2c_gate_ctrl)
+ frontend_ops->i2c_gate_ctrl(fe, 0);
+
+ *bandwidth = state.bandwidth;
+ }
+
+ return 0;
+}
+
+static int stb6100_set_bandw(struct dvb_frontend *fe, u32 bandwidth)
+{
+ struct dvb_frontend_ops *frontend_ops = NULL;
+ struct dvb_tuner_ops *tuner_ops = NULL;
+ struct tuner_state state;
+ int err = 0;
+
+ state.bandwidth = bandwidth;
+ if (&fe->ops)
+ frontend_ops = &fe->ops;
+ if (&frontend_ops->tuner_ops)
+ tuner_ops = &frontend_ops->tuner_ops;
+ if (tuner_ops->set_state) {
+ if (frontend_ops->i2c_gate_ctrl)
+ frontend_ops->i2c_gate_ctrl(fe, 1);
+
+ err = tuner_ops->set_state(fe, DVBFE_TUNER_BANDWIDTH, &state);
+ if (err < 0) {
+ printk(KERN_ERR "%s: Invalid parameter\n", __func__);
+ return err;
+ }
+
+ if (frontend_ops->i2c_gate_ctrl)
+ frontend_ops->i2c_gate_ctrl(fe, 0);
+
+ }
+
+ return 0;
+}
diff --git a/drivers/media/dvb/frontends/stv0900.h b/drivers/media/dvb/frontends/stv0900.h
index bf4e9b6..29c3fa8 100644
--- a/drivers/media/dvb/frontends/stv0900.h
+++ b/drivers/media/dvb/frontends/stv0900.h
@@ -36,6 +36,7 @@
struct stv0900_config {
u8 demod_address;
+ u8 demod_mode;
u32 xtal;
u8 clkmode;/* 0 for CLKI, 2 for XTALI */
@@ -48,6 +49,8 @@
u8 tun2_maddress;
u8 tun1_adc;/* 1 for stv6110, 2 for stb6100 */
u8 tun2_adc;
+ /* Set device param to start dma */
+ int (*set_ts_params)(struct dvb_frontend *fe, int is_punctured);
};
#if defined(CONFIG_DVB_STV0900) || (defined(CONFIG_DVB_STV0900_MODULE) \
diff --git a/drivers/media/dvb/frontends/stv0900_core.c b/drivers/media/dvb/frontends/stv0900_core.c
index 3bde332..df49ea0 100644
--- a/drivers/media/dvb/frontends/stv0900_core.c
+++ b/drivers/media/dvb/frontends/stv0900_core.c
@@ -34,7 +34,7 @@
#include "stv0900_priv.h"
#include "stv0900_init.h"
-static int stvdebug = 1;
+int stvdebug = 1;
module_param_named(debug, stvdebug, int, 0644);
/* internal params node */
@@ -105,7 +105,8 @@
while (new_node->next_inode != NULL)
new_node = new_node->next_inode;
- new_node->next_inode = kmalloc(sizeof(struct stv0900_inode), GFP_KERNEL);
+ new_node->next_inode = kmalloc(sizeof(struct stv0900_inode),
+ GFP_KERNEL);
if (new_node->next_inode != NULL)
new_node = new_node->next_inode;
else
@@ -128,13 +129,13 @@
return (a >= (1 << (width - 1))) ? (a - (1 << width)) : a;
}
-void stv0900_write_reg(struct stv0900_internal *i_params, u16 reg_addr,
+void stv0900_write_reg(struct stv0900_internal *intp, u16 reg_addr,
u8 reg_data)
{
u8 data[3];
int ret;
struct i2c_msg i2cmsg = {
- .addr = i_params->i2c_addr,
+ .addr = intp->i2c_addr,
.flags = 0,
.len = 3,
.buf = data,
@@ -144,33 +145,33 @@
data[1] = LSB(reg_addr);
data[2] = reg_data;
- ret = i2c_transfer(i_params->i2c_adap, &i2cmsg, 1);
+ ret = i2c_transfer(intp->i2c_adap, &i2cmsg, 1);
if (ret != 1)
- dprintk(KERN_ERR "%s: i2c error %d\n", __func__, ret);
+ dprintk("%s: i2c error %d\n", __func__, ret);
}
-u8 stv0900_read_reg(struct stv0900_internal *i_params, u16 reg)
+u8 stv0900_read_reg(struct stv0900_internal *intp, u16 reg)
{
int ret;
u8 b0[] = { MSB(reg), LSB(reg) };
u8 buf = 0;
struct i2c_msg msg[] = {
{
- .addr = i_params->i2c_addr,
+ .addr = intp->i2c_addr,
.flags = 0,
.buf = b0,
.len = 2,
}, {
- .addr = i_params->i2c_addr,
+ .addr = intp->i2c_addr,
.flags = I2C_M_RD,
.buf = &buf,
.len = 1,
},
};
- ret = i2c_transfer(i_params->i2c_adap, msg, 2);
+ ret = i2c_transfer(intp->i2c_adap, msg, 2);
if (ret != 2)
- dprintk(KERN_ERR "%s: i2c error %d, reg[0x%02x]\n",
+ dprintk("%s: i2c error %d, reg[0x%02x]\n",
__func__, ret, reg);
return buf;
@@ -190,169 +191,165 @@
(*pos) = (i - 1);
}
-void stv0900_write_bits(struct stv0900_internal *i_params, u32 label, u8 val)
+void stv0900_write_bits(struct stv0900_internal *intp, u32 label, u8 val)
{
u8 reg, mask, pos;
- reg = stv0900_read_reg(i_params, (label >> 16) & 0xffff);
+ reg = stv0900_read_reg(intp, (label >> 16) & 0xffff);
extract_mask_pos(label, &mask, &pos);
val = mask & (val << pos);
reg = (reg & (~mask)) | val;
- stv0900_write_reg(i_params, (label >> 16) & 0xffff, reg);
+ stv0900_write_reg(intp, (label >> 16) & 0xffff, reg);
}
-u8 stv0900_get_bits(struct stv0900_internal *i_params, u32 label)
+u8 stv0900_get_bits(struct stv0900_internal *intp, u32 label)
{
u8 val = 0xff;
u8 mask, pos;
extract_mask_pos(label, &mask, &pos);
- val = stv0900_read_reg(i_params, label >> 16);
+ val = stv0900_read_reg(intp, label >> 16);
val = (val & mask) >> pos;
return val;
}
-enum fe_stv0900_error stv0900_initialize(struct stv0900_internal *i_params)
+enum fe_stv0900_error stv0900_initialize(struct stv0900_internal *intp)
{
s32 i;
- enum fe_stv0900_error error;
- if (i_params != NULL) {
- i_params->chip_id = stv0900_read_reg(i_params, R0900_MID);
- if (i_params->errs == STV0900_NO_ERROR) {
- /*Startup sequence*/
- stv0900_write_reg(i_params, R0900_P1_DMDISTATE, 0x5c);
- stv0900_write_reg(i_params, R0900_P2_DMDISTATE, 0x5c);
- stv0900_write_reg(i_params, R0900_P1_TNRCFG, 0x6c);
- stv0900_write_reg(i_params, R0900_P2_TNRCFG, 0x6f);
- stv0900_write_reg(i_params, R0900_P1_I2CRPT, 0x20);
- stv0900_write_reg(i_params, R0900_P2_I2CRPT, 0x20);
- stv0900_write_reg(i_params, R0900_NCOARSE, 0x13);
- msleep(3);
- stv0900_write_reg(i_params, R0900_I2CCFG, 0x08);
+ if (intp == NULL)
+ return STV0900_INVALID_HANDLE;
- switch (i_params->clkmode) {
- case 0:
- case 2:
- stv0900_write_reg(i_params, R0900_SYNTCTRL, 0x20
- | i_params->clkmode);
- break;
- default:
- /* preserve SELOSCI bit */
- i = 0x02 & stv0900_read_reg(i_params, R0900_SYNTCTRL);
- stv0900_write_reg(i_params, R0900_SYNTCTRL, 0x20 | i);
- break;
- }
+ intp->chip_id = stv0900_read_reg(intp, R0900_MID);
- msleep(3);
- for (i = 0; i < 182; i++)
- stv0900_write_reg(i_params, STV0900_InitVal[i][0], STV0900_InitVal[i][1]);
+ if (intp->errs != STV0900_NO_ERROR)
+ return intp->errs;
- if (stv0900_read_reg(i_params, R0900_MID) >= 0x20) {
- stv0900_write_reg(i_params, R0900_TSGENERAL, 0x0c);
- for (i = 0; i < 32; i++)
- stv0900_write_reg(i_params, STV0900_Cut20_AddOnVal[i][0], STV0900_Cut20_AddOnVal[i][1]);
- }
+ /*Startup sequence*/
+ stv0900_write_reg(intp, R0900_P1_DMDISTATE, 0x5c);
+ stv0900_write_reg(intp, R0900_P2_DMDISTATE, 0x5c);
+ msleep(3);
+ stv0900_write_reg(intp, R0900_P1_TNRCFG, 0x6c);
+ stv0900_write_reg(intp, R0900_P2_TNRCFG, 0x6f);
+ stv0900_write_reg(intp, R0900_P1_I2CRPT, 0x20);
+ stv0900_write_reg(intp, R0900_P2_I2CRPT, 0x20);
+ stv0900_write_reg(intp, R0900_NCOARSE, 0x13);
+ msleep(3);
+ stv0900_write_reg(intp, R0900_I2CCFG, 0x08);
- stv0900_write_reg(i_params, R0900_P1_FSPYCFG, 0x6c);
- stv0900_write_reg(i_params, R0900_P2_FSPYCFG, 0x6c);
- stv0900_write_reg(i_params, R0900_TSTRES0, 0x80);
- stv0900_write_reg(i_params, R0900_TSTRES0, 0x00);
- }
- error = i_params->errs;
- } else
- error = STV0900_INVALID_HANDLE;
+ switch (intp->clkmode) {
+ case 0:
+ case 2:
+ stv0900_write_reg(intp, R0900_SYNTCTRL, 0x20
+ | intp->clkmode);
+ break;
+ default:
+ /* preserve SELOSCI bit */
+ i = 0x02 & stv0900_read_reg(intp, R0900_SYNTCTRL);
+ stv0900_write_reg(intp, R0900_SYNTCTRL, 0x20 | i);
+ break;
+ }
- return error;
+ msleep(3);
+ for (i = 0; i < 181; i++)
+ stv0900_write_reg(intp, STV0900_InitVal[i][0],
+ STV0900_InitVal[i][1]);
+ if (stv0900_read_reg(intp, R0900_MID) >= 0x20) {
+ stv0900_write_reg(intp, R0900_TSGENERAL, 0x0c);
+ for (i = 0; i < 32; i++)
+ stv0900_write_reg(intp, STV0900_Cut20_AddOnVal[i][0],
+ STV0900_Cut20_AddOnVal[i][1]);
+ }
+
+ stv0900_write_reg(intp, R0900_P1_FSPYCFG, 0x6c);
+ stv0900_write_reg(intp, R0900_P2_FSPYCFG, 0x6c);
+
+ stv0900_write_reg(intp, R0900_P1_PDELCTRL2, 0x01);
+ stv0900_write_reg(intp, R0900_P2_PDELCTRL2, 0x21);
+
+ stv0900_write_reg(intp, R0900_P1_PDELCTRL3, 0x20);
+ stv0900_write_reg(intp, R0900_P2_PDELCTRL3, 0x20);
+
+ stv0900_write_reg(intp, R0900_TSTRES0, 0x80);
+ stv0900_write_reg(intp, R0900_TSTRES0, 0x00);
+
+ return STV0900_NO_ERROR;
}
-u32 stv0900_get_mclk_freq(struct stv0900_internal *i_params, u32 ext_clk)
+u32 stv0900_get_mclk_freq(struct stv0900_internal *intp, u32 ext_clk)
{
u32 mclk = 90000000, div = 0, ad_div = 0;
- div = stv0900_get_bits(i_params, F0900_M_DIV);
- ad_div = ((stv0900_get_bits(i_params, F0900_SELX1RATIO) == 1) ? 4 : 6);
+ div = stv0900_get_bits(intp, F0900_M_DIV);
+ ad_div = ((stv0900_get_bits(intp, F0900_SELX1RATIO) == 1) ? 4 : 6);
mclk = (div + 1) * ext_clk / ad_div;
- dprintk(KERN_INFO "%s: Calculated Mclk = %d\n", __func__, mclk);
+ dprintk("%s: Calculated Mclk = %d\n", __func__, mclk);
return mclk;
}
-enum fe_stv0900_error stv0900_set_mclk(struct stv0900_internal *i_params, u32 mclk)
+enum fe_stv0900_error stv0900_set_mclk(struct stv0900_internal *intp, u32 mclk)
{
- enum fe_stv0900_error error = STV0900_NO_ERROR;
u32 m_div, clk_sel;
- dprintk(KERN_INFO "%s: Mclk set to %d, Quartz = %d\n", __func__, mclk,
- i_params->quartz);
+ dprintk("%s: Mclk set to %d, Quartz = %d\n", __func__, mclk,
+ intp->quartz);
- if (i_params == NULL)
- error = STV0900_INVALID_HANDLE;
- else {
- if (i_params->errs)
- error = STV0900_I2C_ERROR;
- else {
- clk_sel = ((stv0900_get_bits(i_params, F0900_SELX1RATIO) == 1) ? 4 : 6);
- m_div = ((clk_sel * mclk) / i_params->quartz) - 1;
- stv0900_write_bits(i_params, F0900_M_DIV, m_div);
- i_params->mclk = stv0900_get_mclk_freq(i_params,
- i_params->quartz);
+ if (intp == NULL)
+ return STV0900_INVALID_HANDLE;
- /*Set the DiseqC frequency to 22KHz */
- /*
- Formula:
- DiseqC_TX_Freq= MasterClock/(32*F22TX_Reg)
- DiseqC_RX_Freq= MasterClock/(32*F22RX_Reg)
- */
- m_div = i_params->mclk / 704000;
- stv0900_write_reg(i_params, R0900_P1_F22TX, m_div);
- stv0900_write_reg(i_params, R0900_P1_F22RX, m_div);
+ if (intp->errs)
+ return STV0900_I2C_ERROR;
- stv0900_write_reg(i_params, R0900_P2_F22TX, m_div);
- stv0900_write_reg(i_params, R0900_P2_F22RX, m_div);
+ clk_sel = ((stv0900_get_bits(intp, F0900_SELX1RATIO) == 1) ? 4 : 6);
+ m_div = ((clk_sel * mclk) / intp->quartz) - 1;
+ stv0900_write_bits(intp, F0900_M_DIV, m_div);
+ intp->mclk = stv0900_get_mclk_freq(intp,
+ intp->quartz);
- if ((i_params->errs))
- error = STV0900_I2C_ERROR;
- }
- }
+ /*Set the DiseqC frequency to 22KHz */
+ /*
+ Formula:
+ DiseqC_TX_Freq= MasterClock/(32*F22TX_Reg)
+ DiseqC_RX_Freq= MasterClock/(32*F22RX_Reg)
+ */
+ m_div = intp->mclk / 704000;
+ stv0900_write_reg(intp, R0900_P1_F22TX, m_div);
+ stv0900_write_reg(intp, R0900_P1_F22RX, m_div);
- return error;
+ stv0900_write_reg(intp, R0900_P2_F22TX, m_div);
+ stv0900_write_reg(intp, R0900_P2_F22RX, m_div);
+
+ if ((intp->errs))
+ return STV0900_I2C_ERROR;
+
+ return STV0900_NO_ERROR;
}
-u32 stv0900_get_err_count(struct stv0900_internal *i_params, int cntr,
+u32 stv0900_get_err_count(struct stv0900_internal *intp, int cntr,
enum fe_stv0900_demod_num demod)
{
u32 lsb, msb, hsb, err_val;
- s32 err1field_hsb, err1field_msb, err1field_lsb;
- s32 err2field_hsb, err2field_msb, err2field_lsb;
-
- dmd_reg(err1field_hsb, F0900_P1_ERR_CNT12, F0900_P2_ERR_CNT12);
- dmd_reg(err1field_msb, F0900_P1_ERR_CNT11, F0900_P2_ERR_CNT11);
- dmd_reg(err1field_lsb, F0900_P1_ERR_CNT10, F0900_P2_ERR_CNT10);
-
- dmd_reg(err2field_hsb, F0900_P1_ERR_CNT22, F0900_P2_ERR_CNT22);
- dmd_reg(err2field_msb, F0900_P1_ERR_CNT21, F0900_P2_ERR_CNT21);
- dmd_reg(err2field_lsb, F0900_P1_ERR_CNT20, F0900_P2_ERR_CNT20);
switch (cntr) {
case 0:
default:
- hsb = stv0900_get_bits(i_params, err1field_hsb);
- msb = stv0900_get_bits(i_params, err1field_msb);
- lsb = stv0900_get_bits(i_params, err1field_lsb);
+ hsb = stv0900_get_bits(intp, ERR_CNT12);
+ msb = stv0900_get_bits(intp, ERR_CNT11);
+ lsb = stv0900_get_bits(intp, ERR_CNT10);
break;
case 1:
- hsb = stv0900_get_bits(i_params, err2field_hsb);
- msb = stv0900_get_bits(i_params, err2field_msb);
- lsb = stv0900_get_bits(i_params, err2field_lsb);
+ hsb = stv0900_get_bits(intp, ERR_CNT22);
+ msb = stv0900_get_bits(intp, ERR_CNT21);
+ lsb = stv0900_get_bits(intp, ERR_CNT20);
break;
}
@@ -364,26 +361,22 @@
static int stv0900_i2c_gate_ctrl(struct dvb_frontend *fe, int enable)
{
struct stv0900_state *state = fe->demodulator_priv;
- struct stv0900_internal *i_params = state->internal;
+ struct stv0900_internal *intp = state->internal;
enum fe_stv0900_demod_num demod = state->demod;
- u32 fi2c;
-
- dmd_reg(fi2c, F0900_P1_I2CT_ON, F0900_P2_I2CT_ON);
-
- stv0900_write_bits(i_params, fi2c, enable);
+ stv0900_write_bits(intp, I2CT_ON, enable);
return 0;
}
-static void stv0900_set_ts_parallel_serial(struct stv0900_internal *i_params,
+static void stv0900_set_ts_parallel_serial(struct stv0900_internal *intp,
enum fe_stv0900_clock_type path1_ts,
enum fe_stv0900_clock_type path2_ts)
{
- dprintk(KERN_INFO "%s\n", __func__);
+ dprintk("%s\n", __func__);
- if (i_params->chip_id >= 0x20) {
+ if (intp->chip_id >= 0x20) {
switch (path1_ts) {
case STV0900_PARALLEL_PUNCT_CLOCK:
case STV0900_DVBCI_CLOCK:
@@ -391,20 +384,20 @@
case STV0900_SERIAL_PUNCT_CLOCK:
case STV0900_SERIAL_CONT_CLOCK:
default:
- stv0900_write_reg(i_params, R0900_TSGENERAL,
+ stv0900_write_reg(intp, R0900_TSGENERAL,
0x00);
break;
case STV0900_PARALLEL_PUNCT_CLOCK:
case STV0900_DVBCI_CLOCK:
- stv0900_write_reg(i_params, R0900_TSGENERAL,
+ stv0900_write_reg(intp, R0900_TSGENERAL,
0x06);
- stv0900_write_bits(i_params,
+ stv0900_write_bits(intp,
F0900_P1_TSFIFO_MANSPEED, 3);
- stv0900_write_bits(i_params,
+ stv0900_write_bits(intp,
F0900_P2_TSFIFO_MANSPEED, 0);
- stv0900_write_reg(i_params,
+ stv0900_write_reg(intp,
R0900_P1_TSSPEED, 0x14);
- stv0900_write_reg(i_params,
+ stv0900_write_reg(intp,
R0900_P2_TSSPEED, 0x28);
break;
}
@@ -416,14 +409,14 @@
case STV0900_SERIAL_PUNCT_CLOCK:
case STV0900_SERIAL_CONT_CLOCK:
default:
- stv0900_write_reg(i_params,
+ stv0900_write_reg(intp,
R0900_TSGENERAL, 0x0C);
break;
case STV0900_PARALLEL_PUNCT_CLOCK:
case STV0900_DVBCI_CLOCK:
- stv0900_write_reg(i_params,
+ stv0900_write_reg(intp,
R0900_TSGENERAL, 0x0A);
- dprintk(KERN_INFO "%s: 0x0a\n", __func__);
+ dprintk("%s: 0x0a\n", __func__);
break;
}
break;
@@ -436,20 +429,20 @@
case STV0900_SERIAL_PUNCT_CLOCK:
case STV0900_SERIAL_CONT_CLOCK:
default:
- stv0900_write_reg(i_params, R0900_TSGENERAL1X,
+ stv0900_write_reg(intp, R0900_TSGENERAL1X,
0x10);
break;
case STV0900_PARALLEL_PUNCT_CLOCK:
case STV0900_DVBCI_CLOCK:
- stv0900_write_reg(i_params, R0900_TSGENERAL1X,
+ stv0900_write_reg(intp, R0900_TSGENERAL1X,
0x16);
- stv0900_write_bits(i_params,
+ stv0900_write_bits(intp,
F0900_P1_TSFIFO_MANSPEED, 3);
- stv0900_write_bits(i_params,
+ stv0900_write_bits(intp,
F0900_P2_TSFIFO_MANSPEED, 0);
- stv0900_write_reg(i_params, R0900_P1_TSSPEED,
+ stv0900_write_reg(intp, R0900_P1_TSSPEED,
0x14);
- stv0900_write_reg(i_params, R0900_P2_TSSPEED,
+ stv0900_write_reg(intp, R0900_P2_TSSPEED,
0x28);
break;
}
@@ -462,14 +455,14 @@
case STV0900_SERIAL_PUNCT_CLOCK:
case STV0900_SERIAL_CONT_CLOCK:
default:
- stv0900_write_reg(i_params, R0900_TSGENERAL1X,
+ stv0900_write_reg(intp, R0900_TSGENERAL1X,
0x14);
break;
case STV0900_PARALLEL_PUNCT_CLOCK:
case STV0900_DVBCI_CLOCK:
- stv0900_write_reg(i_params, R0900_TSGENERAL1X,
+ stv0900_write_reg(intp, R0900_TSGENERAL1X,
0x12);
- dprintk(KERN_INFO "%s: 0x12\n", __func__);
+ dprintk("%s: 0x12\n", __func__);
break;
}
@@ -479,20 +472,20 @@
switch (path1_ts) {
case STV0900_PARALLEL_PUNCT_CLOCK:
- stv0900_write_bits(i_params, F0900_P1_TSFIFO_SERIAL, 0x00);
- stv0900_write_bits(i_params, F0900_P1_TSFIFO_DVBCI, 0x00);
+ stv0900_write_bits(intp, F0900_P1_TSFIFO_SERIAL, 0x00);
+ stv0900_write_bits(intp, F0900_P1_TSFIFO_DVBCI, 0x00);
break;
case STV0900_DVBCI_CLOCK:
- stv0900_write_bits(i_params, F0900_P1_TSFIFO_SERIAL, 0x00);
- stv0900_write_bits(i_params, F0900_P1_TSFIFO_DVBCI, 0x01);
+ stv0900_write_bits(intp, F0900_P1_TSFIFO_SERIAL, 0x00);
+ stv0900_write_bits(intp, F0900_P1_TSFIFO_DVBCI, 0x01);
break;
case STV0900_SERIAL_PUNCT_CLOCK:
- stv0900_write_bits(i_params, F0900_P1_TSFIFO_SERIAL, 0x01);
- stv0900_write_bits(i_params, F0900_P1_TSFIFO_DVBCI, 0x00);
+ stv0900_write_bits(intp, F0900_P1_TSFIFO_SERIAL, 0x01);
+ stv0900_write_bits(intp, F0900_P1_TSFIFO_DVBCI, 0x00);
break;
case STV0900_SERIAL_CONT_CLOCK:
- stv0900_write_bits(i_params, F0900_P1_TSFIFO_SERIAL, 0x01);
- stv0900_write_bits(i_params, F0900_P1_TSFIFO_DVBCI, 0x01);
+ stv0900_write_bits(intp, F0900_P1_TSFIFO_SERIAL, 0x01);
+ stv0900_write_bits(intp, F0900_P1_TSFIFO_DVBCI, 0x01);
break;
default:
break;
@@ -500,29 +493,29 @@
switch (path2_ts) {
case STV0900_PARALLEL_PUNCT_CLOCK:
- stv0900_write_bits(i_params, F0900_P2_TSFIFO_SERIAL, 0x00);
- stv0900_write_bits(i_params, F0900_P2_TSFIFO_DVBCI, 0x00);
+ stv0900_write_bits(intp, F0900_P2_TSFIFO_SERIAL, 0x00);
+ stv0900_write_bits(intp, F0900_P2_TSFIFO_DVBCI, 0x00);
break;
case STV0900_DVBCI_CLOCK:
- stv0900_write_bits(i_params, F0900_P2_TSFIFO_SERIAL, 0x00);
- stv0900_write_bits(i_params, F0900_P2_TSFIFO_DVBCI, 0x01);
+ stv0900_write_bits(intp, F0900_P2_TSFIFO_SERIAL, 0x00);
+ stv0900_write_bits(intp, F0900_P2_TSFIFO_DVBCI, 0x01);
break;
case STV0900_SERIAL_PUNCT_CLOCK:
- stv0900_write_bits(i_params, F0900_P2_TSFIFO_SERIAL, 0x01);
- stv0900_write_bits(i_params, F0900_P2_TSFIFO_DVBCI, 0x00);
+ stv0900_write_bits(intp, F0900_P2_TSFIFO_SERIAL, 0x01);
+ stv0900_write_bits(intp, F0900_P2_TSFIFO_DVBCI, 0x00);
break;
case STV0900_SERIAL_CONT_CLOCK:
- stv0900_write_bits(i_params, F0900_P2_TSFIFO_SERIAL, 0x01);
- stv0900_write_bits(i_params, F0900_P2_TSFIFO_DVBCI, 0x01);
+ stv0900_write_bits(intp, F0900_P2_TSFIFO_SERIAL, 0x01);
+ stv0900_write_bits(intp, F0900_P2_TSFIFO_DVBCI, 0x01);
break;
default:
break;
}
- stv0900_write_bits(i_params, F0900_P2_RST_HWARE, 1);
- stv0900_write_bits(i_params, F0900_P2_RST_HWARE, 0);
- stv0900_write_bits(i_params, F0900_P1_RST_HWARE, 1);
- stv0900_write_bits(i_params, F0900_P1_RST_HWARE, 0);
+ stv0900_write_bits(intp, F0900_P2_RST_HWARE, 1);
+ stv0900_write_bits(intp, F0900_P2_RST_HWARE, 0);
+ stv0900_write_bits(intp, F0900_P1_RST_HWARE, 1);
+ stv0900_write_bits(intp, F0900_P1_RST_HWARE, 0);
}
void stv0900_set_tuner(struct dvb_frontend *fe, u32 frequency,
@@ -574,7 +567,7 @@
}
}
-static s32 stv0900_get_rf_level(struct stv0900_internal *i_params,
+static s32 stv0900_get_rf_level(struct stv0900_internal *intp,
const struct stv0900_table *lookup,
enum fe_stv0900_demod_num demod)
{
@@ -584,45 +577,41 @@
i,
rf_lvl = 0;
- dprintk(KERN_INFO "%s\n", __func__);
+ dprintk("%s\n", __func__);
- if ((lookup != NULL) && lookup->size) {
- switch (demod) {
- case STV0900_DEMOD_1:
- default:
- agc_gain = MAKEWORD(stv0900_get_bits(i_params, F0900_P1_AGCIQ_VALUE1),
- stv0900_get_bits(i_params, F0900_P1_AGCIQ_VALUE0));
- break;
- case STV0900_DEMOD_2:
- agc_gain = MAKEWORD(stv0900_get_bits(i_params, F0900_P2_AGCIQ_VALUE1),
- stv0900_get_bits(i_params, F0900_P2_AGCIQ_VALUE0));
- break;
+ if ((lookup == NULL) || (lookup->size <= 0))
+ return 0;
+
+ agc_gain = MAKEWORD(stv0900_get_bits(intp, AGCIQ_VALUE1),
+ stv0900_get_bits(intp, AGCIQ_VALUE0));
+
+ imin = 0;
+ imax = lookup->size - 1;
+ if (INRANGE(lookup->table[imin].regval, agc_gain,
+ lookup->table[imax].regval)) {
+ while ((imax - imin) > 1) {
+ i = (imax + imin) >> 1;
+
+ if (INRANGE(lookup->table[imin].regval,
+ agc_gain,
+ lookup->table[i].regval))
+ imax = i;
+ else
+ imin = i;
}
- imin = 0;
- imax = lookup->size - 1;
- if (INRANGE(lookup->table[imin].regval, agc_gain, lookup->table[imax].regval)) {
- while ((imax - imin) > 1) {
- i = (imax + imin) >> 1;
+ rf_lvl = (s32)agc_gain - lookup->table[imin].regval;
+ rf_lvl *= (lookup->table[imax].realval -
+ lookup->table[imin].realval);
+ rf_lvl /= (lookup->table[imax].regval -
+ lookup->table[imin].regval);
+ rf_lvl += lookup->table[imin].realval;
+ } else if (agc_gain > lookup->table[0].regval)
+ rf_lvl = 5;
+ else if (agc_gain < lookup->table[lookup->size-1].regval)
+ rf_lvl = -100;
- if (INRANGE(lookup->table[imin].regval, agc_gain, lookup->table[i].regval))
- imax = i;
- else
- imin = i;
- }
-
- rf_lvl = (((s32)agc_gain - lookup->table[imin].regval)
- * (lookup->table[imax].realval - lookup->table[imin].realval)
- / (lookup->table[imax].regval - lookup->table[imin].regval))
- + lookup->table[imin].realval;
- } else if (agc_gain > lookup->table[0].regval)
- rf_lvl = 5;
- else if (agc_gain < lookup->table[lookup->size-1].regval)
- rf_lvl = -100;
-
- }
-
- dprintk(KERN_INFO "%s: RFLevel = %d\n", __func__, rf_lvl);
+ dprintk("%s: RFLevel = %d\n", __func__, rf_lvl);
return rf_lvl;
}
@@ -634,50 +623,51 @@
s32 rflevel = stv0900_get_rf_level(internal, &stv0900_rf,
state->demod);
- *strength = (rflevel + 100) * (16383 / 105);
+ rflevel = (rflevel + 100) * (65535 / 70);
+ if (rflevel < 0)
+ rflevel = 0;
+
+ if (rflevel > 65535)
+ rflevel = 65535;
+
+ *strength = rflevel;
return 0;
}
-
static s32 stv0900_carr_get_quality(struct dvb_frontend *fe,
const struct stv0900_table *lookup)
{
struct stv0900_state *state = fe->demodulator_priv;
- struct stv0900_internal *i_params = state->internal;
+ struct stv0900_internal *intp = state->internal;
enum fe_stv0900_demod_num demod = state->demod;
- s32 c_n = -100,
- regval, imin, imax,
+ s32 c_n = -100,
+ regval,
+ imin,
+ imax,
i,
- lock_flag_field,
noise_field1,
noise_field0;
- dprintk(KERN_INFO "%s\n", __func__);
+ dprintk("%s\n", __func__);
- dmd_reg(lock_flag_field, F0900_P1_LOCK_DEFINITIF,
- F0900_P2_LOCK_DEFINITIF);
if (stv0900_get_standard(fe, demod) == STV0900_DVBS2_STANDARD) {
- dmd_reg(noise_field1, F0900_P1_NOSPLHT_NORMED1,
- F0900_P2_NOSPLHT_NORMED1);
- dmd_reg(noise_field0, F0900_P1_NOSPLHT_NORMED0,
- F0900_P2_NOSPLHT_NORMED0);
+ noise_field1 = NOSPLHT_NORMED1;
+ noise_field0 = NOSPLHT_NORMED0;
} else {
- dmd_reg(noise_field1, F0900_P1_NOSDATAT_NORMED1,
- F0900_P2_NOSDATAT_NORMED1);
- dmd_reg(noise_field0, F0900_P1_NOSDATAT_NORMED0,
- F0900_P2_NOSDATAT_NORMED0);
+ noise_field1 = NOSDATAT_NORMED1;
+ noise_field0 = NOSDATAT_NORMED0;
}
- if (stv0900_get_bits(i_params, lock_flag_field)) {
+ if (stv0900_get_bits(intp, LOCK_DEFINITIF)) {
if ((lookup != NULL) && lookup->size) {
regval = 0;
msleep(5);
for (i = 0; i < 16; i++) {
- regval += MAKEWORD(stv0900_get_bits(i_params,
+ regval += MAKEWORD(stv0900_get_bits(intp,
noise_field1),
- stv0900_get_bits(i_params,
+ stv0900_get_bits(intp,
noise_field0));
msleep(1);
}
@@ -715,10 +705,9 @@
static int stv0900_read_ucblocks(struct dvb_frontend *fe, u32 * ucblocks)
{
struct stv0900_state *state = fe->demodulator_priv;
- struct stv0900_internal *i_params = state->internal;
+ struct stv0900_internal *intp = state->internal;
enum fe_stv0900_demod_num demod = state->demod;
u8 err_val1, err_val0;
- s32 err_field1, err_field0;
u32 header_err_val = 0;
*ucblocks = 0x0;
@@ -726,24 +715,14 @@
/* DVB-S2 delineator errors count */
/* retreiving number for errnous headers */
- dmd_reg(err_field0, R0900_P1_BBFCRCKO0,
- R0900_P2_BBFCRCKO0);
- dmd_reg(err_field1, R0900_P1_BBFCRCKO1,
- R0900_P2_BBFCRCKO1);
-
- err_val1 = stv0900_read_reg(i_params, err_field1);
- err_val0 = stv0900_read_reg(i_params, err_field0);
- header_err_val = (err_val1<<8) | err_val0;
+ err_val1 = stv0900_read_reg(intp, BBFCRCKO1);
+ err_val0 = stv0900_read_reg(intp, BBFCRCKO0);
+ header_err_val = (err_val1 << 8) | err_val0;
/* retreiving number for errnous packets */
- dmd_reg(err_field0, R0900_P1_UPCRCKO0,
- R0900_P2_UPCRCKO0);
- dmd_reg(err_field1, R0900_P1_UPCRCKO1,
- R0900_P2_UPCRCKO1);
-
- err_val1 = stv0900_read_reg(i_params, err_field1);
- err_val0 = stv0900_read_reg(i_params, err_field0);
- *ucblocks = (err_val1<<8) | err_val0;
+ err_val1 = stv0900_read_reg(intp, UPCRCKO1);
+ err_val0 = stv0900_read_reg(intp, UPCRCKO0);
+ *ucblocks = (err_val1 << 8) | err_val0;
*ucblocks += header_err_val;
}
@@ -752,33 +731,27 @@
static int stv0900_read_snr(struct dvb_frontend *fe, u16 *snr)
{
- *snr = stv0900_carr_get_quality(fe,
+ s32 snrlcl = stv0900_carr_get_quality(fe,
(const struct stv0900_table *)&stv0900_s2_cn);
- *snr += 30;
- *snr *= (16383 / 1030);
+ snrlcl = (snrlcl + 30) * 384;
+ if (snrlcl < 0)
+ snrlcl = 0;
+
+ if (snrlcl > 65535)
+ snrlcl = 65535;
+
+ *snr = snrlcl;
return 0;
}
-static u32 stv0900_get_ber(struct stv0900_internal *i_params,
+static u32 stv0900_get_ber(struct stv0900_internal *intp,
enum fe_stv0900_demod_num demod)
{
u32 ber = 10000000, i;
- s32 dmd_state_reg;
s32 demod_state;
- s32 vstatus_reg;
- s32 prvit_field;
- s32 pdel_status_reg;
- s32 pdel_lock_field;
- dmd_reg(dmd_state_reg, F0900_P1_HEADER_MODE, F0900_P2_HEADER_MODE);
- dmd_reg(vstatus_reg, R0900_P1_VSTATUSVIT, R0900_P2_VSTATUSVIT);
- dmd_reg(prvit_field, F0900_P1_PRFVIT, F0900_P2_PRFVIT);
- dmd_reg(pdel_status_reg, R0900_P1_PDELSTATUS1, R0900_P2_PDELSTATUS1);
- dmd_reg(pdel_lock_field, F0900_P1_PKTDELIN_LOCK,
- F0900_P2_PKTDELIN_LOCK);
-
- demod_state = stv0900_get_bits(i_params, dmd_state_reg);
+ demod_state = stv0900_get_bits(intp, HEADER_MODE);
switch (demod_state) {
case STV0900_SEARCH:
@@ -790,11 +763,11 @@
ber = 0;
for (i = 0; i < 5; i++) {
msleep(5);
- ber += stv0900_get_err_count(i_params, 0, demod);
+ ber += stv0900_get_err_count(intp, 0, demod);
}
ber /= 5;
- if (stv0900_get_bits(i_params, prvit_field)) {
+ if (stv0900_get_bits(intp, PRFVIT)) {
ber *= 9766;
ber = ber >> 13;
}
@@ -804,11 +777,11 @@
ber = 0;
for (i = 0; i < 5; i++) {
msleep(5);
- ber += stv0900_get_err_count(i_params, 0, demod);
+ ber += stv0900_get_err_count(intp, 0, demod);
}
ber /= 5;
- if (stv0900_get_bits(i_params, pdel_lock_field)) {
+ if (stv0900_get_bits(intp, PKTDELIN_LOCK)) {
ber *= 9766;
ber = ber >> 13;
}
@@ -829,20 +802,16 @@
return 0;
}
-int stv0900_get_demod_lock(struct stv0900_internal *i_params,
+int stv0900_get_demod_lock(struct stv0900_internal *intp,
enum fe_stv0900_demod_num demod, s32 time_out)
{
s32 timer = 0,
- lock = 0,
- header_field,
- lock_field;
+ lock = 0;
enum fe_stv0900_search_state dmd_state;
- dmd_reg(header_field, F0900_P1_HEADER_MODE, F0900_P2_HEADER_MODE);
- dmd_reg(lock_field, F0900_P1_LOCK_DEFINITIF, F0900_P2_LOCK_DEFINITIF);
while ((timer < time_out) && (lock == 0)) {
- dmd_state = stv0900_get_bits(i_params, header_field);
+ dmd_state = stv0900_get_bits(intp, HEADER_MODE);
dprintk("Demod State = %d\n", dmd_state);
switch (dmd_state) {
case STV0900_SEARCH:
@@ -852,7 +821,7 @@
break;
case STV0900_DVBS2_FOUND:
case STV0900_DVBS_FOUND:
- lock = stv0900_get_bits(i_params, lock_field);
+ lock = stv0900_get_bits(intp, LOCK_DEFINITIF);
break;
}
@@ -870,56 +839,40 @@
return lock;
}
-void stv0900_stop_all_s2_modcod(struct stv0900_internal *i_params,
+void stv0900_stop_all_s2_modcod(struct stv0900_internal *intp,
enum fe_stv0900_demod_num demod)
{
s32 regflist,
i;
- dprintk(KERN_INFO "%s\n", __func__);
+ dprintk("%s\n", __func__);
- dmd_reg(regflist, R0900_P1_MODCODLST0, R0900_P2_MODCODLST0);
+ regflist = MODCODLST0;
for (i = 0; i < 16; i++)
- stv0900_write_reg(i_params, regflist + i, 0xff);
+ stv0900_write_reg(intp, regflist + i, 0xff);
}
-void stv0900_activate_s2_modcode(struct stv0900_internal *i_params,
+void stv0900_activate_s2_modcod(struct stv0900_internal *intp,
enum fe_stv0900_demod_num demod)
{
u32 matype,
- mod_code,
- fmod,
- reg_index,
- field_index;
+ mod_code,
+ fmod,
+ reg_index,
+ field_index;
- dprintk(KERN_INFO "%s\n", __func__);
+ dprintk("%s\n", __func__);
- if (i_params->chip_id <= 0x11) {
+ if (intp->chip_id <= 0x11) {
msleep(5);
- switch (demod) {
- case STV0900_DEMOD_1:
- default:
- mod_code = stv0900_read_reg(i_params,
- R0900_P1_PLHMODCOD);
- matype = mod_code & 0x3;
- mod_code = (mod_code & 0x7f) >> 2;
+ mod_code = stv0900_read_reg(intp, PLHMODCOD);
+ matype = mod_code & 0x3;
+ mod_code = (mod_code & 0x7f) >> 2;
- reg_index = R0900_P1_MODCODLSTF - mod_code / 2;
- field_index = mod_code % 2;
- break;
- case STV0900_DEMOD_2:
- mod_code = stv0900_read_reg(i_params,
- R0900_P2_PLHMODCOD);
- matype = mod_code & 0x3;
- mod_code = (mod_code & 0x7f) >> 2;
-
- reg_index = R0900_P2_MODCODLSTF - mod_code / 2;
- field_index = mod_code % 2;
- break;
- }
-
+ reg_index = MODCODLSTF - mod_code / 2;
+ field_index = mod_code % 2;
switch (matype) {
case 0:
@@ -938,70 +891,41 @@
}
if ((INRANGE(STV0900_QPSK_12, mod_code, STV0900_8PSK_910))
- && (matype <= 1)) {
+ && (matype <= 1)) {
if (field_index == 0)
- stv0900_write_reg(i_params, reg_index,
+ stv0900_write_reg(intp, reg_index,
0xf0 | fmod);
else
- stv0900_write_reg(i_params, reg_index,
+ stv0900_write_reg(intp, reg_index,
(fmod << 4) | 0xf);
}
- } else if (i_params->chip_id >= 0x12) {
- switch (demod) {
- case STV0900_DEMOD_1:
- default:
- for (reg_index = 0; reg_index < 7; reg_index++)
- stv0900_write_reg(i_params, R0900_P1_MODCODLST0 + reg_index, 0xff);
- stv0900_write_reg(i_params, R0900_P1_MODCODLSTE, 0xff);
- stv0900_write_reg(i_params, R0900_P1_MODCODLSTF, 0xcf);
- for (reg_index = 0; reg_index < 8; reg_index++)
- stv0900_write_reg(i_params, R0900_P1_MODCODLST7 + reg_index, 0xcc);
+ } else if (intp->chip_id >= 0x12) {
+ for (reg_index = 0; reg_index < 7; reg_index++)
+ stv0900_write_reg(intp, MODCODLST0 + reg_index, 0xff);
- break;
- case STV0900_DEMOD_2:
- for (reg_index = 0; reg_index < 7; reg_index++)
- stv0900_write_reg(i_params, R0900_P2_MODCODLST0 + reg_index, 0xff);
+ stv0900_write_reg(intp, MODCODLSTE, 0xff);
+ stv0900_write_reg(intp, MODCODLSTF, 0xcf);
+ for (reg_index = 0; reg_index < 8; reg_index++)
+ stv0900_write_reg(intp, MODCODLST7 + reg_index, 0xcc);
- stv0900_write_reg(i_params, R0900_P2_MODCODLSTE, 0xff);
- stv0900_write_reg(i_params, R0900_P2_MODCODLSTF, 0xcf);
- for (reg_index = 0; reg_index < 8; reg_index++)
- stv0900_write_reg(i_params, R0900_P2_MODCODLST7 + reg_index, 0xcc);
-
- break;
- }
}
}
-void stv0900_activate_s2_modcode_single(struct stv0900_internal *i_params,
+void stv0900_activate_s2_modcod_single(struct stv0900_internal *intp,
enum fe_stv0900_demod_num demod)
{
u32 reg_index;
- dprintk(KERN_INFO "%s\n", __func__);
+ dprintk("%s\n", __func__);
- switch (demod) {
- case STV0900_DEMOD_1:
- default:
- stv0900_write_reg(i_params, R0900_P1_MODCODLST0, 0xff);
- stv0900_write_reg(i_params, R0900_P1_MODCODLST1, 0xf0);
- stv0900_write_reg(i_params, R0900_P1_MODCODLSTF, 0x0f);
- for (reg_index = 0; reg_index < 13; reg_index++)
- stv0900_write_reg(i_params,
- R0900_P1_MODCODLST2 + reg_index, 0);
+ stv0900_write_reg(intp, MODCODLST0, 0xff);
+ stv0900_write_reg(intp, MODCODLST1, 0xf0);
+ stv0900_write_reg(intp, MODCODLSTF, 0x0f);
+ for (reg_index = 0; reg_index < 13; reg_index++)
+ stv0900_write_reg(intp, MODCODLST2 + reg_index, 0);
- break;
- case STV0900_DEMOD_2:
- stv0900_write_reg(i_params, R0900_P2_MODCODLST0, 0xff);
- stv0900_write_reg(i_params, R0900_P2_MODCODLST1, 0xf0);
- stv0900_write_reg(i_params, R0900_P2_MODCODLSTF, 0x0f);
- for (reg_index = 0; reg_index < 13; reg_index++)
- stv0900_write_reg(i_params,
- R0900_P2_MODCODLST2 + reg_index, 0);
-
- break;
- }
}
static enum dvbfe_algo stv0900_frontend_algo(struct dvb_frontend *fe)
@@ -1012,7 +936,7 @@
static int stb0900_set_property(struct dvb_frontend *fe,
struct dtv_property *tvp)
{
- dprintk(KERN_INFO "%s(..)\n", __func__);
+ dprintk("%s(..)\n", __func__);
return 0;
}
@@ -1020,166 +944,123 @@
static int stb0900_get_property(struct dvb_frontend *fe,
struct dtv_property *tvp)
{
- dprintk(KERN_INFO "%s(..)\n", __func__);
+ dprintk("%s(..)\n", __func__);
return 0;
}
-void stv0900_start_search(struct stv0900_internal *i_params,
+void stv0900_start_search(struct stv0900_internal *intp,
enum fe_stv0900_demod_num demod)
{
+ u32 freq;
+ s16 freq_s16 ;
- switch (demod) {
- case STV0900_DEMOD_1:
- default:
- stv0900_write_bits(i_params, F0900_P1_I2C_DEMOD_MODE, 0x1f);
+ stv0900_write_bits(intp, DEMOD_MODE, 0x1f);
+ if (intp->chip_id == 0x10)
+ stv0900_write_reg(intp, CORRELEXP, 0xaa);
- if (i_params->chip_id == 0x10)
- stv0900_write_reg(i_params, R0900_P1_CORRELEXP, 0xaa);
+ if (intp->chip_id < 0x20)
+ stv0900_write_reg(intp, CARHDR, 0x55);
- if (i_params->chip_id < 0x20)
- stv0900_write_reg(i_params, R0900_P1_CARHDR, 0x55);
-
- if (i_params->dmd1_symbol_rate <= 5000000) {
- stv0900_write_reg(i_params, R0900_P1_CARCFG, 0x44);
- stv0900_write_reg(i_params, R0900_P1_CFRUP1, 0x0f);
- stv0900_write_reg(i_params, R0900_P1_CFRUP0, 0xff);
- stv0900_write_reg(i_params, R0900_P1_CFRLOW1, 0xf0);
- stv0900_write_reg(i_params, R0900_P1_CFRLOW0, 0x00);
- stv0900_write_reg(i_params, R0900_P1_RTCS2, 0x68);
+ if (intp->chip_id <= 0x20) {
+ if (intp->symbol_rate[0] <= 5000000) {
+ stv0900_write_reg(intp, CARCFG, 0x44);
+ stv0900_write_reg(intp, CFRUP1, 0x0f);
+ stv0900_write_reg(intp, CFRUP0, 0xff);
+ stv0900_write_reg(intp, CFRLOW1, 0xf0);
+ stv0900_write_reg(intp, CFRLOW0, 0x00);
+ stv0900_write_reg(intp, RTCS2, 0x68);
} else {
- stv0900_write_reg(i_params, R0900_P1_CARCFG, 0xc4);
- stv0900_write_reg(i_params, R0900_P1_RTCS2, 0x44);
+ stv0900_write_reg(intp, CARCFG, 0xc4);
+ stv0900_write_reg(intp, RTCS2, 0x44);
}
- stv0900_write_reg(i_params, R0900_P1_CFRINIT1, 0);
- stv0900_write_reg(i_params, R0900_P1_CFRINIT0, 0);
+ } else { /*cut 3.0 above*/
+ if (intp->symbol_rate[demod] <= 5000000)
+ stv0900_write_reg(intp, RTCS2, 0x68);
+ else
+ stv0900_write_reg(intp, RTCS2, 0x44);
- if (i_params->chip_id >= 0x20) {
- stv0900_write_reg(i_params, R0900_P1_EQUALCFG, 0x41);
- stv0900_write_reg(i_params, R0900_P1_FFECFG, 0x41);
-
- if ((i_params->dmd1_srch_standard == STV0900_SEARCH_DVBS1) || (i_params->dmd1_srch_standard == STV0900_SEARCH_DSS) || (i_params->dmd1_srch_standard == STV0900_AUTO_SEARCH)) {
- stv0900_write_reg(i_params, R0900_P1_VITSCALE, 0x82);
- stv0900_write_reg(i_params, R0900_P1_VAVSRVIT, 0x0);
- }
- }
-
- stv0900_write_reg(i_params, R0900_P1_SFRSTEP, 0x00);
- stv0900_write_reg(i_params, R0900_P1_TMGTHRISE, 0xe0);
- stv0900_write_reg(i_params, R0900_P1_TMGTHFALL, 0xc0);
- stv0900_write_bits(i_params, F0900_P1_SCAN_ENABLE, 0);
- stv0900_write_bits(i_params, F0900_P1_CFR_AUTOSCAN, 0);
- stv0900_write_bits(i_params, F0900_P1_S1S2_SEQUENTIAL, 0);
- stv0900_write_reg(i_params, R0900_P1_RTC, 0x88);
- if (i_params->chip_id >= 0x20) {
- if (i_params->dmd1_symbol_rate < 2000000) {
- stv0900_write_reg(i_params, R0900_P1_CARFREQ, 0x39);
- stv0900_write_reg(i_params, R0900_P1_CARHDR, 0x40);
- }
-
- if (i_params->dmd1_symbol_rate < 10000000) {
- stv0900_write_reg(i_params, R0900_P1_CARFREQ, 0x4c);
- stv0900_write_reg(i_params, R0900_P1_CARHDR, 0x20);
- } else {
- stv0900_write_reg(i_params, R0900_P1_CARFREQ, 0x4b);
- stv0900_write_reg(i_params, R0900_P1_CARHDR, 0x20);
- }
-
+ stv0900_write_reg(intp, CARCFG, 0x46);
+ if (intp->srch_algo[demod] == STV0900_WARM_START) {
+ freq = 1000 << 16;
+ freq /= (intp->mclk / 1000);
+ freq_s16 = (s16)freq;
} else {
- if (i_params->dmd1_symbol_rate < 10000000)
- stv0900_write_reg(i_params, R0900_P1_CARFREQ, 0xef);
+ freq = (intp->srch_range[demod] / 2000);
+ if (intp->symbol_rate[demod] <= 5000000)
+ freq += 80;
else
- stv0900_write_reg(i_params, R0900_P1_CARFREQ, 0xed);
+ freq += 600;
+
+ freq = freq << 16;
+ freq /= (intp->mclk / 1000);
+ freq_s16 = (s16)freq;
}
- switch (i_params->dmd1_srch_algo) {
- case STV0900_WARM_START:
- stv0900_write_reg(i_params, R0900_P1_DMDISTATE, 0x1f);
- stv0900_write_reg(i_params, R0900_P1_DMDISTATE, 0x18);
- break;
- case STV0900_COLD_START:
- stv0900_write_reg(i_params, R0900_P1_DMDISTATE, 0x1f);
- stv0900_write_reg(i_params, R0900_P1_DMDISTATE, 0x15);
- break;
- default:
- break;
+ stv0900_write_bits(intp, CFR_UP1, MSB(freq_s16));
+ stv0900_write_bits(intp, CFR_UP0, LSB(freq_s16));
+ freq_s16 *= (-1);
+ stv0900_write_bits(intp, CFR_LOW1, MSB(freq_s16));
+ stv0900_write_bits(intp, CFR_LOW0, LSB(freq_s16));
+ }
+
+ stv0900_write_reg(intp, CFRINIT1, 0);
+ stv0900_write_reg(intp, CFRINIT0, 0);
+
+ if (intp->chip_id >= 0x20) {
+ stv0900_write_reg(intp, EQUALCFG, 0x41);
+ stv0900_write_reg(intp, FFECFG, 0x41);
+
+ if ((intp->srch_standard[demod] == STV0900_SEARCH_DVBS1) ||
+ (intp->srch_standard[demod] == STV0900_SEARCH_DSS) ||
+ (intp->srch_standard[demod] == STV0900_AUTO_SEARCH)) {
+ stv0900_write_reg(intp, VITSCALE,
+ 0x82);
+ stv0900_write_reg(intp, VAVSRVIT, 0x0);
+ }
+ }
+
+ stv0900_write_reg(intp, SFRSTEP, 0x00);
+ stv0900_write_reg(intp, TMGTHRISE, 0xe0);
+ stv0900_write_reg(intp, TMGTHFALL, 0xc0);
+ stv0900_write_bits(intp, SCAN_ENABLE, 0);
+ stv0900_write_bits(intp, CFR_AUTOSCAN, 0);
+ stv0900_write_bits(intp, S1S2_SEQUENTIAL, 0);
+ stv0900_write_reg(intp, RTC, 0x88);
+ if (intp->chip_id >= 0x20) {
+ if (intp->symbol_rate[demod] < 2000000) {
+ if (intp->chip_id <= 0x20)
+ stv0900_write_reg(intp, CARFREQ, 0x39);
+ else /*cut 3.0*/
+ stv0900_write_reg(intp, CARFREQ, 0x89);
+
+ stv0900_write_reg(intp, CARHDR, 0x40);
+ } else if (intp->symbol_rate[demod] < 10000000) {
+ stv0900_write_reg(intp, CARFREQ, 0x4c);
+ stv0900_write_reg(intp, CARHDR, 0x20);
+ } else {
+ stv0900_write_reg(intp, CARFREQ, 0x4b);
+ stv0900_write_reg(intp, CARHDR, 0x20);
}
+ } else {
+ if (intp->symbol_rate[demod] < 10000000)
+ stv0900_write_reg(intp, CARFREQ, 0xef);
+ else
+ stv0900_write_reg(intp, CARFREQ, 0xed);
+ }
+
+ switch (intp->srch_algo[demod]) {
+ case STV0900_WARM_START:
+ stv0900_write_reg(intp, DMDISTATE, 0x1f);
+ stv0900_write_reg(intp, DMDISTATE, 0x18);
break;
- case STV0900_DEMOD_2:
- stv0900_write_bits(i_params, F0900_P2_I2C_DEMOD_MODE, 0x1f);
- if (i_params->chip_id == 0x10)
- stv0900_write_reg(i_params, R0900_P2_CORRELEXP, 0xaa);
-
- if (i_params->chip_id < 0x20)
- stv0900_write_reg(i_params, R0900_P2_CARHDR, 0x55);
-
- if (i_params->dmd2_symbol_rate <= 5000000) {
- stv0900_write_reg(i_params, R0900_P2_CARCFG, 0x44);
- stv0900_write_reg(i_params, R0900_P2_CFRUP1, 0x0f);
- stv0900_write_reg(i_params, R0900_P2_CFRUP0, 0xff);
- stv0900_write_reg(i_params, R0900_P2_CFRLOW1, 0xf0);
- stv0900_write_reg(i_params, R0900_P2_CFRLOW0, 0x00);
- stv0900_write_reg(i_params, R0900_P2_RTCS2, 0x68);
- } else {
- stv0900_write_reg(i_params, R0900_P2_CARCFG, 0xc4);
- stv0900_write_reg(i_params, R0900_P2_RTCS2, 0x44);
- }
-
- stv0900_write_reg(i_params, R0900_P2_CFRINIT1, 0);
- stv0900_write_reg(i_params, R0900_P2_CFRINIT0, 0);
-
- if (i_params->chip_id >= 0x20) {
- stv0900_write_reg(i_params, R0900_P2_EQUALCFG, 0x41);
- stv0900_write_reg(i_params, R0900_P2_FFECFG, 0x41);
- if ((i_params->dmd2_srch_stndrd == STV0900_SEARCH_DVBS1) || (i_params->dmd2_srch_stndrd == STV0900_SEARCH_DSS) || (i_params->dmd2_srch_stndrd == STV0900_AUTO_SEARCH)) {
- stv0900_write_reg(i_params, R0900_P2_VITSCALE, 0x82);
- stv0900_write_reg(i_params, R0900_P2_VAVSRVIT, 0x0);
- }
- }
-
- stv0900_write_reg(i_params, R0900_P2_SFRSTEP, 0x00);
- stv0900_write_reg(i_params, R0900_P2_TMGTHRISE, 0xe0);
- stv0900_write_reg(i_params, R0900_P2_TMGTHFALL, 0xc0);
- stv0900_write_bits(i_params, F0900_P2_SCAN_ENABLE, 0);
- stv0900_write_bits(i_params, F0900_P2_CFR_AUTOSCAN, 0);
- stv0900_write_bits(i_params, F0900_P2_S1S2_SEQUENTIAL, 0);
- stv0900_write_reg(i_params, R0900_P2_RTC, 0x88);
- if (i_params->chip_id >= 0x20) {
- if (i_params->dmd2_symbol_rate < 2000000) {
- stv0900_write_reg(i_params, R0900_P2_CARFREQ, 0x39);
- stv0900_write_reg(i_params, R0900_P2_CARHDR, 0x40);
- }
-
- if (i_params->dmd2_symbol_rate < 10000000) {
- stv0900_write_reg(i_params, R0900_P2_CARFREQ, 0x4c);
- stv0900_write_reg(i_params, R0900_P2_CARHDR, 0x20);
- } else {
- stv0900_write_reg(i_params, R0900_P2_CARFREQ, 0x4b);
- stv0900_write_reg(i_params, R0900_P2_CARHDR, 0x20);
- }
-
- } else {
- if (i_params->dmd2_symbol_rate < 10000000)
- stv0900_write_reg(i_params, R0900_P2_CARFREQ, 0xef);
- else
- stv0900_write_reg(i_params, R0900_P2_CARFREQ, 0xed);
- }
-
- switch (i_params->dmd2_srch_algo) {
- case STV0900_WARM_START:
- stv0900_write_reg(i_params, R0900_P2_DMDISTATE, 0x1f);
- stv0900_write_reg(i_params, R0900_P2_DMDISTATE, 0x18);
- break;
- case STV0900_COLD_START:
- stv0900_write_reg(i_params, R0900_P2_DMDISTATE, 0x1f);
- stv0900_write_reg(i_params, R0900_P2_DMDISTATE, 0x15);
- break;
- default:
- break;
- }
-
+ case STV0900_COLD_START:
+ stv0900_write_reg(intp, DMDISTATE, 0x1f);
+ stv0900_write_reg(intp, DMDISTATE, 0x15);
+ break;
+ default:
break;
}
}
@@ -1188,33 +1069,40 @@
s32 pilot, u8 chip_id)
{
u8 aclc_value = 0x29;
- s32 i;
- const struct stv0900_car_loop_optim *car_loop_s2;
+ s32 i;
+ const struct stv0900_car_loop_optim *cls2, *cllqs2, *cllas2;
- dprintk(KERN_INFO "%s\n", __func__);
+ dprintk("%s\n", __func__);
- if (chip_id <= 0x12)
- car_loop_s2 = FE_STV0900_S2CarLoop;
- else if (chip_id == 0x20)
- car_loop_s2 = FE_STV0900_S2CarLoopCut20;
- else
- car_loop_s2 = FE_STV0900_S2CarLoop;
+ if (chip_id <= 0x12) {
+ cls2 = FE_STV0900_S2CarLoop;
+ cllqs2 = FE_STV0900_S2LowQPCarLoopCut30;
+ cllas2 = FE_STV0900_S2APSKCarLoopCut30;
+ } else if (chip_id == 0x20) {
+ cls2 = FE_STV0900_S2CarLoopCut20;
+ cllqs2 = FE_STV0900_S2LowQPCarLoopCut20;
+ cllas2 = FE_STV0900_S2APSKCarLoopCut20;
+ } else {
+ cls2 = FE_STV0900_S2CarLoopCut30;
+ cllqs2 = FE_STV0900_S2LowQPCarLoopCut30;
+ cllas2 = FE_STV0900_S2APSKCarLoopCut30;
+ }
if (modcode < STV0900_QPSK_12) {
i = 0;
- while ((i < 3) && (modcode != FE_STV0900_S2LowQPCarLoopCut20[i].modcode))
+ while ((i < 3) && (modcode != cllqs2[i].modcode))
i++;
if (i >= 3)
i = 2;
} else {
i = 0;
- while ((i < 14) && (modcode != car_loop_s2[i].modcode))
+ while ((i < 14) && (modcode != cls2[i].modcode))
i++;
if (i >= 14) {
i = 0;
- while ((i < 11) && (modcode != FE_STV0900_S2APSKCarLoopCut20[i].modcode))
+ while ((i < 11) && (modcode != cllas2[i].modcode))
i++;
if (i >= 11)
@@ -1225,76 +1113,82 @@
if (modcode <= STV0900_QPSK_25) {
if (pilot) {
if (srate <= 3000000)
- aclc_value = FE_STV0900_S2LowQPCarLoopCut20[i].car_loop_pilots_on_2;
+ aclc_value = cllqs2[i].car_loop_pilots_on_2;
else if (srate <= 7000000)
- aclc_value = FE_STV0900_S2LowQPCarLoopCut20[i].car_loop_pilots_on_5;
+ aclc_value = cllqs2[i].car_loop_pilots_on_5;
else if (srate <= 15000000)
- aclc_value = FE_STV0900_S2LowQPCarLoopCut20[i].car_loop_pilots_on_10;
+ aclc_value = cllqs2[i].car_loop_pilots_on_10;
else if (srate <= 25000000)
- aclc_value = FE_STV0900_S2LowQPCarLoopCut20[i].car_loop_pilots_on_20;
+ aclc_value = cllqs2[i].car_loop_pilots_on_20;
else
- aclc_value = FE_STV0900_S2LowQPCarLoopCut20[i].car_loop_pilots_on_30;
+ aclc_value = cllqs2[i].car_loop_pilots_on_30;
} else {
if (srate <= 3000000)
- aclc_value = FE_STV0900_S2LowQPCarLoopCut20[i].car_loop_pilots_off_2;
+ aclc_value = cllqs2[i].car_loop_pilots_off_2;
else if (srate <= 7000000)
- aclc_value = FE_STV0900_S2LowQPCarLoopCut20[i].car_loop_pilots_off_5;
+ aclc_value = cllqs2[i].car_loop_pilots_off_5;
else if (srate <= 15000000)
- aclc_value = FE_STV0900_S2LowQPCarLoopCut20[i].car_loop_pilots_off_10;
+ aclc_value = cllqs2[i].car_loop_pilots_off_10;
else if (srate <= 25000000)
- aclc_value = FE_STV0900_S2LowQPCarLoopCut20[i].car_loop_pilots_off_20;
+ aclc_value = cllqs2[i].car_loop_pilots_off_20;
else
- aclc_value = FE_STV0900_S2LowQPCarLoopCut20[i].car_loop_pilots_off_30;
+ aclc_value = cllqs2[i].car_loop_pilots_off_30;
}
} else if (modcode <= STV0900_8PSK_910) {
if (pilot) {
if (srate <= 3000000)
- aclc_value = car_loop_s2[i].car_loop_pilots_on_2;
+ aclc_value = cls2[i].car_loop_pilots_on_2;
else if (srate <= 7000000)
- aclc_value = car_loop_s2[i].car_loop_pilots_on_5;
+ aclc_value = cls2[i].car_loop_pilots_on_5;
else if (srate <= 15000000)
- aclc_value = car_loop_s2[i].car_loop_pilots_on_10;
+ aclc_value = cls2[i].car_loop_pilots_on_10;
else if (srate <= 25000000)
- aclc_value = car_loop_s2[i].car_loop_pilots_on_20;
+ aclc_value = cls2[i].car_loop_pilots_on_20;
else
- aclc_value = car_loop_s2[i].car_loop_pilots_on_30;
+ aclc_value = cls2[i].car_loop_pilots_on_30;
} else {
if (srate <= 3000000)
- aclc_value = car_loop_s2[i].car_loop_pilots_off_2;
+ aclc_value = cls2[i].car_loop_pilots_off_2;
else if (srate <= 7000000)
- aclc_value = car_loop_s2[i].car_loop_pilots_off_5;
+ aclc_value = cls2[i].car_loop_pilots_off_5;
else if (srate <= 15000000)
- aclc_value = car_loop_s2[i].car_loop_pilots_off_10;
+ aclc_value = cls2[i].car_loop_pilots_off_10;
else if (srate <= 25000000)
- aclc_value = car_loop_s2[i].car_loop_pilots_off_20;
+ aclc_value = cls2[i].car_loop_pilots_off_20;
else
- aclc_value = car_loop_s2[i].car_loop_pilots_off_30;
+ aclc_value = cls2[i].car_loop_pilots_off_30;
}
} else {
if (srate <= 3000000)
- aclc_value = FE_STV0900_S2APSKCarLoopCut20[i].car_loop_pilots_on_2;
+ aclc_value = cllas2[i].car_loop_pilots_on_2;
else if (srate <= 7000000)
- aclc_value = FE_STV0900_S2APSKCarLoopCut20[i].car_loop_pilots_on_5;
+ aclc_value = cllas2[i].car_loop_pilots_on_5;
else if (srate <= 15000000)
- aclc_value = FE_STV0900_S2APSKCarLoopCut20[i].car_loop_pilots_on_10;
+ aclc_value = cllas2[i].car_loop_pilots_on_10;
else if (srate <= 25000000)
- aclc_value = FE_STV0900_S2APSKCarLoopCut20[i].car_loop_pilots_on_20;
+ aclc_value = cllas2[i].car_loop_pilots_on_20;
else
- aclc_value = FE_STV0900_S2APSKCarLoopCut20[i].car_loop_pilots_on_30;
+ aclc_value = cllas2[i].car_loop_pilots_on_30;
}
return aclc_value;
}
-u8 stv0900_get_optim_short_carr_loop(s32 srate, enum fe_stv0900_modulation modulation, u8 chip_id)
+u8 stv0900_get_optim_short_carr_loop(s32 srate,
+ enum fe_stv0900_modulation modulation,
+ u8 chip_id)
{
+ const struct stv0900_short_frames_car_loop_optim *s2scl;
+ const struct stv0900_short_frames_car_loop_optim_vs_mod *s2sclc30;
s32 mod_index = 0;
-
u8 aclc_value = 0x0b;
- dprintk(KERN_INFO "%s\n", __func__);
+ dprintk("%s\n", __func__);
+
+ s2scl = FE_STV0900_S2ShortCarLoop;
+ s2sclc30 = FE_STV0900_S2ShortCarLoopCut30;
switch (modulation) {
case STV0900_QPSK:
@@ -1312,75 +1206,116 @@
break;
}
- switch (chip_id) {
- case 0x20:
+ if (chip_id >= 0x30) {
if (srate <= 3000000)
- aclc_value = FE_STV0900_S2ShortCarLoop[mod_index].car_loop_cut20_2;
+ aclc_value = s2sclc30[mod_index].car_loop_2;
else if (srate <= 7000000)
- aclc_value = FE_STV0900_S2ShortCarLoop[mod_index].car_loop_cut20_5;
+ aclc_value = s2sclc30[mod_index].car_loop_5;
else if (srate <= 15000000)
- aclc_value = FE_STV0900_S2ShortCarLoop[mod_index].car_loop_cut20_10;
+ aclc_value = s2sclc30[mod_index].car_loop_10;
else if (srate <= 25000000)
- aclc_value = FE_STV0900_S2ShortCarLoop[mod_index].car_loop_cut20_20;
+ aclc_value = s2sclc30[mod_index].car_loop_20;
else
- aclc_value = FE_STV0900_S2ShortCarLoop[mod_index].car_loop_cut20_30;
+ aclc_value = s2sclc30[mod_index].car_loop_30;
- break;
- case 0x12:
- default:
+ } else if (chip_id >= 0x20) {
if (srate <= 3000000)
- aclc_value = FE_STV0900_S2ShortCarLoop[mod_index].car_loop_cut12_2;
+ aclc_value = s2scl[mod_index].car_loop_cut20_2;
else if (srate <= 7000000)
- aclc_value = FE_STV0900_S2ShortCarLoop[mod_index].car_loop_cut12_5;
+ aclc_value = s2scl[mod_index].car_loop_cut20_5;
else if (srate <= 15000000)
- aclc_value = FE_STV0900_S2ShortCarLoop[mod_index].car_loop_cut12_10;
+ aclc_value = s2scl[mod_index].car_loop_cut20_10;
else if (srate <= 25000000)
- aclc_value = FE_STV0900_S2ShortCarLoop[mod_index].car_loop_cut12_20;
+ aclc_value = s2scl[mod_index].car_loop_cut20_20;
else
- aclc_value = FE_STV0900_S2ShortCarLoop[mod_index].car_loop_cut12_30;
+ aclc_value = s2scl[mod_index].car_loop_cut20_30;
- break;
+ } else {
+ if (srate <= 3000000)
+ aclc_value = s2scl[mod_index].car_loop_cut12_2;
+ else if (srate <= 7000000)
+ aclc_value = s2scl[mod_index].car_loop_cut12_5;
+ else if (srate <= 15000000)
+ aclc_value = s2scl[mod_index].car_loop_cut12_10;
+ else if (srate <= 25000000)
+ aclc_value = s2scl[mod_index].car_loop_cut12_20;
+ else
+ aclc_value = s2scl[mod_index].car_loop_cut12_30;
+
}
return aclc_value;
}
-static enum fe_stv0900_error stv0900_st_dvbs2_single(struct stv0900_internal *i_params,
+static
+enum fe_stv0900_error stv0900_st_dvbs2_single(struct stv0900_internal *intp,
enum fe_stv0900_demod_mode LDPC_Mode,
enum fe_stv0900_demod_num demod)
{
enum fe_stv0900_error error = STV0900_NO_ERROR;
+ s32 reg_ind;
- dprintk(KERN_INFO "%s\n", __func__);
+ dprintk("%s\n", __func__);
switch (LDPC_Mode) {
case STV0900_DUAL:
default:
- if ((i_params->demod_mode != STV0900_DUAL)
- || (stv0900_get_bits(i_params, F0900_DDEMOD) != 1)) {
- stv0900_write_reg(i_params, R0900_GENCFG, 0x1d);
+ if ((intp->demod_mode != STV0900_DUAL)
+ || (stv0900_get_bits(intp, F0900_DDEMOD) != 1)) {
+ stv0900_write_reg(intp, R0900_GENCFG, 0x1d);
- i_params->demod_mode = STV0900_DUAL;
+ intp->demod_mode = STV0900_DUAL;
- stv0900_write_bits(i_params, F0900_FRESFEC, 1);
- stv0900_write_bits(i_params, F0900_FRESFEC, 0);
+ stv0900_write_bits(intp, F0900_FRESFEC, 1);
+ stv0900_write_bits(intp, F0900_FRESFEC, 0);
+
+ for (reg_ind = 0; reg_ind < 7; reg_ind++)
+ stv0900_write_reg(intp,
+ R0900_P1_MODCODLST0 + reg_ind,
+ 0xff);
+ for (reg_ind = 0; reg_ind < 8; reg_ind++)
+ stv0900_write_reg(intp,
+ R0900_P1_MODCODLST7 + reg_ind,
+ 0xcc);
+
+ stv0900_write_reg(intp, R0900_P1_MODCODLSTE, 0xff);
+ stv0900_write_reg(intp, R0900_P1_MODCODLSTF, 0xcf);
+
+ for (reg_ind = 0; reg_ind < 7; reg_ind++)
+ stv0900_write_reg(intp,
+ R0900_P2_MODCODLST0 + reg_ind,
+ 0xff);
+ for (reg_ind = 0; reg_ind < 8; reg_ind++)
+ stv0900_write_reg(intp,
+ R0900_P2_MODCODLST7 + reg_ind,
+ 0xcc);
+
+ stv0900_write_reg(intp, R0900_P2_MODCODLSTE, 0xff);
+ stv0900_write_reg(intp, R0900_P2_MODCODLSTF, 0xcf);
}
break;
case STV0900_SINGLE:
- if (demod == STV0900_DEMOD_2)
- stv0900_write_reg(i_params, R0900_GENCFG, 0x06);
- else
- stv0900_write_reg(i_params, R0900_GENCFG, 0x04);
+ if (demod == STV0900_DEMOD_2) {
+ stv0900_stop_all_s2_modcod(intp, STV0900_DEMOD_1);
+ stv0900_activate_s2_modcod_single(intp,
+ STV0900_DEMOD_2);
+ stv0900_write_reg(intp, R0900_GENCFG, 0x06);
+ } else {
+ stv0900_stop_all_s2_modcod(intp, STV0900_DEMOD_2);
+ stv0900_activate_s2_modcod_single(intp,
+ STV0900_DEMOD_1);
+ stv0900_write_reg(intp, R0900_GENCFG, 0x04);
+ }
- i_params->demod_mode = STV0900_SINGLE;
+ intp->demod_mode = STV0900_SINGLE;
- stv0900_write_bits(i_params, F0900_FRESFEC, 1);
- stv0900_write_bits(i_params, F0900_FRESFEC, 0);
- stv0900_write_bits(i_params, F0900_P1_ALGOSWRST, 1);
- stv0900_write_bits(i_params, F0900_P1_ALGOSWRST, 0);
- stv0900_write_bits(i_params, F0900_P2_ALGOSWRST, 1);
- stv0900_write_bits(i_params, F0900_P2_ALGOSWRST, 0);
+ stv0900_write_bits(intp, F0900_FRESFEC, 1);
+ stv0900_write_bits(intp, F0900_FRESFEC, 0);
+ stv0900_write_bits(intp, F0900_P1_ALGOSWRST, 1);
+ stv0900_write_bits(intp, F0900_P1_ALGOSWRST, 0);
+ stv0900_write_bits(intp, F0900_P2_ALGOSWRST, 1);
+ stv0900_write_bits(intp, F0900_P2_ALGOSWRST, 0);
break;
}
@@ -1393,131 +1328,131 @@
struct stv0900_state *state = fe->demodulator_priv;
enum fe_stv0900_error error = STV0900_NO_ERROR;
enum fe_stv0900_error demodError = STV0900_NO_ERROR;
+ struct stv0900_internal *intp = NULL;
+
int selosci, i;
struct stv0900_inode *temp_int = find_inode(state->i2c_adap,
state->config->demod_address);
- dprintk(KERN_INFO "%s\n", __func__);
+ dprintk("%s\n", __func__);
- if (temp_int != NULL) {
+ if ((temp_int != NULL) && (p_init->demod_mode == STV0900_DUAL)) {
state->internal = temp_int->internal;
(state->internal->dmds_used)++;
- dprintk(KERN_INFO "%s: Find Internal Structure!\n", __func__);
+ dprintk("%s: Find Internal Structure!\n", __func__);
return STV0900_NO_ERROR;
} else {
- state->internal = kmalloc(sizeof(struct stv0900_internal), GFP_KERNEL);
+ state->internal = kmalloc(sizeof(struct stv0900_internal),
+ GFP_KERNEL);
temp_int = append_internal(state->internal);
state->internal->dmds_used = 1;
state->internal->i2c_adap = state->i2c_adap;
state->internal->i2c_addr = state->config->demod_address;
state->internal->clkmode = state->config->clkmode;
state->internal->errs = STV0900_NO_ERROR;
- dprintk(KERN_INFO "%s: Create New Internal Structure!\n", __func__);
+ dprintk("%s: Create New Internal Structure!\n", __func__);
}
- if (state->internal != NULL) {
- demodError = stv0900_initialize(state->internal);
- if (demodError == STV0900_NO_ERROR) {
- error = STV0900_NO_ERROR;
- } else {
- if (demodError == STV0900_INVALID_HANDLE)
- error = STV0900_INVALID_HANDLE;
- else
- error = STV0900_I2C_ERROR;
- }
+ if (state->internal == NULL) {
+ error = STV0900_INVALID_HANDLE;
+ return error;
+ }
- if (state->internal != NULL) {
- if (error == STV0900_NO_ERROR) {
- state->internal->demod_mode = p_init->demod_mode;
-
- stv0900_st_dvbs2_single(state->internal, state->internal->demod_mode, STV0900_DEMOD_1);
-
- state->internal->chip_id = stv0900_read_reg(state->internal, R0900_MID);
- state->internal->rolloff = p_init->rolloff;
- state->internal->quartz = p_init->dmd_ref_clk;
-
- stv0900_write_bits(state->internal, F0900_P1_ROLLOFF_CONTROL, p_init->rolloff);
- stv0900_write_bits(state->internal, F0900_P2_ROLLOFF_CONTROL, p_init->rolloff);
-
- state->internal->ts_config = p_init->ts_config;
- if (state->internal->ts_config == NULL)
- stv0900_set_ts_parallel_serial(state->internal,
- p_init->path1_ts_clock,
- p_init->path2_ts_clock);
- else {
- for (i = 0; state->internal->ts_config[i].addr != 0xffff; i++)
- stv0900_write_reg(state->internal,
- state->internal->ts_config[i].addr,
- state->internal->ts_config[i].val);
-
- stv0900_write_bits(state->internal, F0900_P2_RST_HWARE, 1);
- stv0900_write_bits(state->internal, F0900_P2_RST_HWARE, 0);
- stv0900_write_bits(state->internal, F0900_P1_RST_HWARE, 1);
- stv0900_write_bits(state->internal, F0900_P1_RST_HWARE, 0);
- }
-
- stv0900_write_bits(state->internal, F0900_P1_TUN_MADDRESS, p_init->tun1_maddress);
- switch (p_init->tuner1_adc) {
- case 1:
- stv0900_write_reg(state->internal, R0900_TSTTNR1, 0x26);
- break;
- default:
- break;
- }
-
- stv0900_write_bits(state->internal, F0900_P2_TUN_MADDRESS, p_init->tun2_maddress);
- switch (p_init->tuner2_adc) {
- case 1:
- stv0900_write_reg(state->internal, R0900_TSTTNR3, 0x26);
- break;
- default:
- break;
- }
-
- stv0900_write_bits(state->internal, F0900_P1_TUN_IQSWAP, p_init->tun1_iq_inversion);
- stv0900_write_bits(state->internal, F0900_P2_TUN_IQSWAP, p_init->tun2_iq_inversion);
- stv0900_set_mclk(state->internal, 135000000);
- msleep(3);
-
- switch (state->internal->clkmode) {
- case 0:
- case 2:
- stv0900_write_reg(state->internal, R0900_SYNTCTRL, 0x20 | state->internal->clkmode);
- break;
- default:
- selosci = 0x02 & stv0900_read_reg(state->internal, R0900_SYNTCTRL);
- stv0900_write_reg(state->internal, R0900_SYNTCTRL, 0x20 | selosci);
- break;
- }
- msleep(3);
-
- state->internal->mclk = stv0900_get_mclk_freq(state->internal, state->internal->quartz);
- if (state->internal->errs)
- error = STV0900_I2C_ERROR;
- }
- } else {
+ demodError = stv0900_initialize(state->internal);
+ if (demodError == STV0900_NO_ERROR) {
+ error = STV0900_NO_ERROR;
+ } else {
+ if (demodError == STV0900_INVALID_HANDLE)
error = STV0900_INVALID_HANDLE;
- }
+ else
+ error = STV0900_I2C_ERROR;
+
+ return error;
}
+ if (state->internal == NULL) {
+ error = STV0900_INVALID_HANDLE;
+ return error;
+ }
+
+ intp = state->internal;
+
+ intp->demod_mode = p_init->demod_mode;
+ stv0900_st_dvbs2_single(intp, intp->demod_mode, STV0900_DEMOD_1);
+ intp->chip_id = stv0900_read_reg(intp, R0900_MID);
+ intp->rolloff = p_init->rolloff;
+ intp->quartz = p_init->dmd_ref_clk;
+
+ stv0900_write_bits(intp, F0900_P1_ROLLOFF_CONTROL, p_init->rolloff);
+ stv0900_write_bits(intp, F0900_P2_ROLLOFF_CONTROL, p_init->rolloff);
+
+ intp->ts_config = p_init->ts_config;
+ if (intp->ts_config == NULL)
+ stv0900_set_ts_parallel_serial(intp,
+ p_init->path1_ts_clock,
+ p_init->path2_ts_clock);
+ else {
+ for (i = 0; intp->ts_config[i].addr != 0xffff; i++)
+ stv0900_write_reg(intp,
+ intp->ts_config[i].addr,
+ intp->ts_config[i].val);
+
+ stv0900_write_bits(intp, F0900_P2_RST_HWARE, 1);
+ stv0900_write_bits(intp, F0900_P2_RST_HWARE, 0);
+ stv0900_write_bits(intp, F0900_P1_RST_HWARE, 1);
+ stv0900_write_bits(intp, F0900_P1_RST_HWARE, 0);
+ }
+
+ stv0900_write_bits(intp, F0900_P1_TUN_MADDRESS, p_init->tun1_maddress);
+ switch (p_init->tuner1_adc) {
+ case 1:
+ stv0900_write_reg(intp, R0900_TSTTNR1, 0x26);
+ break;
+ default:
+ break;
+ }
+
+ stv0900_write_bits(intp, F0900_P2_TUN_MADDRESS, p_init->tun2_maddress);
+ switch (p_init->tuner2_adc) {
+ case 1:
+ stv0900_write_reg(intp, R0900_TSTTNR3, 0x26);
+ break;
+ default:
+ break;
+ }
+
+ stv0900_write_bits(intp, F0900_P1_TUN_IQSWAP, p_init->tun1_iq_inv);
+ stv0900_write_bits(intp, F0900_P2_TUN_IQSWAP, p_init->tun2_iq_inv);
+ stv0900_set_mclk(intp, 135000000);
+ msleep(3);
+
+ switch (intp->clkmode) {
+ case 0:
+ case 2:
+ stv0900_write_reg(intp, R0900_SYNTCTRL, 0x20 | intp->clkmode);
+ break;
+ default:
+ selosci = 0x02 & stv0900_read_reg(intp, R0900_SYNTCTRL);
+ stv0900_write_reg(intp, R0900_SYNTCTRL, 0x20 | selosci);
+ break;
+ }
+ msleep(3);
+
+ intp->mclk = stv0900_get_mclk_freq(intp, intp->quartz);
+ if (intp->errs)
+ error = STV0900_I2C_ERROR;
+
return error;
}
-static int stv0900_status(struct stv0900_internal *i_params,
+static int stv0900_status(struct stv0900_internal *intp,
enum fe_stv0900_demod_num demod)
{
enum fe_stv0900_search_state demod_state;
- s32 mode_field, delin_field, lock_field, fifo_field, lockedvit_field;
int locked = FALSE;
- dmd_reg(mode_field, F0900_P1_HEADER_MODE, F0900_P2_HEADER_MODE);
- dmd_reg(lock_field, F0900_P1_LOCK_DEFINITIF, F0900_P2_LOCK_DEFINITIF);
- dmd_reg(delin_field, F0900_P1_PKTDELIN_LOCK, F0900_P2_PKTDELIN_LOCK);
- dmd_reg(fifo_field, F0900_P1_TSFIFO_LINEOK, F0900_P2_TSFIFO_LINEOK);
- dmd_reg(lockedvit_field, F0900_P1_LOCKEDVIT, F0900_P2_LOCKEDVIT);
-
- demod_state = stv0900_get_bits(i_params, mode_field);
+ demod_state = stv0900_get_bits(intp, HEADER_MODE);
switch (demod_state) {
case STV0900_SEARCH:
case STV0900_PLH_DETECTED:
@@ -1525,17 +1460,19 @@
locked = FALSE;
break;
case STV0900_DVBS2_FOUND:
- locked = stv0900_get_bits(i_params, lock_field) &&
- stv0900_get_bits(i_params, delin_field) &&
- stv0900_get_bits(i_params, fifo_field);
+ locked = stv0900_get_bits(intp, LOCK_DEFINITIF) &&
+ stv0900_get_bits(intp, PKTDELIN_LOCK) &&
+ stv0900_get_bits(intp, TSFIFO_LINEOK);
break;
case STV0900_DVBS_FOUND:
- locked = stv0900_get_bits(i_params, lock_field) &&
- stv0900_get_bits(i_params, lockedvit_field) &&
- stv0900_get_bits(i_params, fifo_field);
+ locked = stv0900_get_bits(intp, LOCK_DEFINITIF) &&
+ stv0900_get_bits(intp, LOCKEDVIT) &&
+ stv0900_get_bits(intp, TSFIFO_LINEOK);
break;
}
+ dprintk("%s: locked = %d\n", __func__, locked);
+
return locked;
}
@@ -1543,7 +1480,8 @@
struct dvb_frontend_parameters *params)
{
struct stv0900_state *state = fe->demodulator_priv;
- struct stv0900_internal *i_params = state->internal;
+ struct stv0900_internal *intp = state->internal;
+ enum fe_stv0900_demod_num demod = state->demod;
struct dtv_frontend_properties *c = &fe->dtv_property_cache;
struct stv0900_search_params p_search;
@@ -1551,10 +1489,16 @@
enum fe_stv0900_error error = STV0900_NO_ERROR;
- dprintk(KERN_INFO "%s: ", __func__);
+ dprintk("%s: ", __func__);
+
+ if (!(INRANGE(100000, c->symbol_rate, 70000000)))
+ return DVBFE_ALGO_SEARCH_FAILED;
+
+ if (state->config->set_ts_params)
+ state->config->set_ts_params(fe, 0);
p_result.locked = FALSE;
- p_search.path = state->demod;
+ p_search.path = demod;
p_search.frequency = c->frequency;
p_search.symbol_rate = c->symbol_rate;
p_search.search_range = 10000000;
@@ -1563,103 +1507,47 @@
p_search.iq_inversion = STV0900_IQ_AUTO;
p_search.search_algo = STV0900_BLIND_SEARCH;
- if ((INRANGE(100000, p_search.symbol_rate, 70000000)) &&
- (INRANGE(100000, p_search.search_range, 50000000))) {
- switch (p_search.path) {
- case STV0900_DEMOD_1:
+ intp->srch_standard[demod] = p_search.standard;
+ intp->symbol_rate[demod] = p_search.symbol_rate;
+ intp->srch_range[demod] = p_search.search_range;
+ intp->freq[demod] = p_search.frequency;
+ intp->srch_algo[demod] = p_search.search_algo;
+ intp->srch_iq_inv[demod] = p_search.iq_inversion;
+ intp->fec[demod] = p_search.fec;
+ if ((stv0900_algo(fe) == STV0900_RANGEOK) &&
+ (intp->errs == STV0900_NO_ERROR)) {
+ p_result.locked = intp->result[demod].locked;
+ p_result.standard = intp->result[demod].standard;
+ p_result.frequency = intp->result[demod].frequency;
+ p_result.symbol_rate = intp->result[demod].symbol_rate;
+ p_result.fec = intp->result[demod].fec;
+ p_result.modcode = intp->result[demod].modcode;
+ p_result.pilot = intp->result[demod].pilot;
+ p_result.frame_len = intp->result[demod].frame_len;
+ p_result.spectrum = intp->result[demod].spectrum;
+ p_result.rolloff = intp->result[demod].rolloff;
+ p_result.modulation = intp->result[demod].modulation;
+ } else {
+ p_result.locked = FALSE;
+ switch (intp->err[demod]) {
+ case STV0900_I2C_ERROR:
+ error = STV0900_I2C_ERROR;
+ break;
+ case STV0900_NO_ERROR:
default:
- i_params->dmd1_srch_standard = p_search.standard;
- i_params->dmd1_symbol_rate = p_search.symbol_rate;
- i_params->dmd1_srch_range = p_search.search_range;
- i_params->tuner1_freq = p_search.frequency;
- i_params->dmd1_srch_algo = p_search.search_algo;
- i_params->dmd1_srch_iq_inv = p_search.iq_inversion;
- i_params->dmd1_fec = p_search.fec;
- break;
-
- case STV0900_DEMOD_2:
- i_params->dmd2_srch_stndrd = p_search.standard;
- i_params->dmd2_symbol_rate = p_search.symbol_rate;
- i_params->dmd2_srch_range = p_search.search_range;
- i_params->tuner2_freq = p_search.frequency;
- i_params->dmd2_srch_algo = p_search.search_algo;
- i_params->dmd2_srch_iq_inv = p_search.iq_inversion;
- i_params->dmd2_fec = p_search.fec;
+ error = STV0900_SEARCH_FAILED;
break;
}
-
- if ((stv0900_algo(fe) == STV0900_RANGEOK) &&
- (i_params->errs == STV0900_NO_ERROR)) {
- switch (p_search.path) {
- case STV0900_DEMOD_1:
- default:
- p_result.locked = i_params->dmd1_rslts.locked;
- p_result.standard = i_params->dmd1_rslts.standard;
- p_result.frequency = i_params->dmd1_rslts.frequency;
- p_result.symbol_rate = i_params->dmd1_rslts.symbol_rate;
- p_result.fec = i_params->dmd1_rslts.fec;
- p_result.modcode = i_params->dmd1_rslts.modcode;
- p_result.pilot = i_params->dmd1_rslts.pilot;
- p_result.frame_length = i_params->dmd1_rslts.frame_length;
- p_result.spectrum = i_params->dmd1_rslts.spectrum;
- p_result.rolloff = i_params->dmd1_rslts.rolloff;
- p_result.modulation = i_params->dmd1_rslts.modulation;
- break;
- case STV0900_DEMOD_2:
- p_result.locked = i_params->dmd2_rslts.locked;
- p_result.standard = i_params->dmd2_rslts.standard;
- p_result.frequency = i_params->dmd2_rslts.frequency;
- p_result.symbol_rate = i_params->dmd2_rslts.symbol_rate;
- p_result.fec = i_params->dmd2_rslts.fec;
- p_result.modcode = i_params->dmd2_rslts.modcode;
- p_result.pilot = i_params->dmd2_rslts.pilot;
- p_result.frame_length = i_params->dmd2_rslts.frame_length;
- p_result.spectrum = i_params->dmd2_rslts.spectrum;
- p_result.rolloff = i_params->dmd2_rslts.rolloff;
- p_result.modulation = i_params->dmd2_rslts.modulation;
- break;
- }
-
- } else {
- p_result.locked = FALSE;
- switch (p_search.path) {
- case STV0900_DEMOD_1:
- switch (i_params->dmd1_err) {
- case STV0900_I2C_ERROR:
- error = STV0900_I2C_ERROR;
- break;
- case STV0900_NO_ERROR:
- default:
- error = STV0900_SEARCH_FAILED;
- break;
- }
- break;
- case STV0900_DEMOD_2:
- switch (i_params->dmd2_err) {
- case STV0900_I2C_ERROR:
- error = STV0900_I2C_ERROR;
- break;
- case STV0900_NO_ERROR:
- default:
- error = STV0900_SEARCH_FAILED;
- break;
- }
- break;
- }
- }
-
- } else
- error = STV0900_BAD_PARAMETER;
+ }
if ((p_result.locked == TRUE) && (error == STV0900_NO_ERROR)) {
- dprintk(KERN_INFO "Search Success\n");
+ dprintk("Search Success\n");
return DVBFE_ALGO_SEARCH_SUCCESS;
} else {
- dprintk(KERN_INFO "Search Fail\n");
+ dprintk("Search Fail\n");
return DVBFE_ALGO_SEARCH_FAILED;
}
- return DVBFE_ALGO_SEARCH_ERROR;
}
static int stv0900_read_status(struct dvb_frontend *fe, enum fe_status *status)
@@ -1690,16 +1578,13 @@
{
struct stv0900_state *state = fe->demodulator_priv;
- struct stv0900_internal *i_params = state->internal;
+ struct stv0900_internal *intp = state->internal;
enum fe_stv0900_demod_num demod = state->demod;
- s32 rst_field;
-
- dmd_reg(rst_field, F0900_P1_RST_HWARE, F0900_P2_RST_HWARE);
if (stop_ts == TRUE)
- stv0900_write_bits(i_params, rst_field, 1);
+ stv0900_write_bits(intp, RST_HWARE, 1);
else
- stv0900_write_bits(i_params, rst_field, 0);
+ stv0900_write_bits(intp, RST_HWARE, 0);
return 0;
}
@@ -1707,23 +1592,19 @@
static int stv0900_diseqc_init(struct dvb_frontend *fe)
{
struct stv0900_state *state = fe->demodulator_priv;
- struct stv0900_internal *i_params = state->internal;
+ struct stv0900_internal *intp = state->internal;
enum fe_stv0900_demod_num demod = state->demod;
- s32 mode_field, reset_field;
- dmd_reg(mode_field, F0900_P1_DISTX_MODE, F0900_P2_DISTX_MODE);
- dmd_reg(reset_field, F0900_P1_DISEQC_RESET, F0900_P2_DISEQC_RESET);
-
- stv0900_write_bits(i_params, mode_field, state->config->diseqc_mode);
- stv0900_write_bits(i_params, reset_field, 1);
- stv0900_write_bits(i_params, reset_field, 0);
+ stv0900_write_bits(intp, DISTX_MODE, state->config->diseqc_mode);
+ stv0900_write_bits(intp, DISEQC_RESET, 1);
+ stv0900_write_bits(intp, DISEQC_RESET, 0);
return 0;
}
static int stv0900_init(struct dvb_frontend *fe)
{
- dprintk(KERN_INFO "%s\n", __func__);
+ dprintk("%s\n", __func__);
stv0900_stop_ts(fe, 1);
stv0900_diseqc_init(fe);
@@ -1731,48 +1612,24 @@
return 0;
}
-static int stv0900_diseqc_send(struct stv0900_internal *i_params , u8 *Data,
+static int stv0900_diseqc_send(struct stv0900_internal *intp , u8 *data,
u32 NbData, enum fe_stv0900_demod_num demod)
{
s32 i = 0;
- switch (demod) {
- case STV0900_DEMOD_1:
- default:
- stv0900_write_bits(i_params, F0900_P1_DIS_PRECHARGE, 1);
- while (i < NbData) {
- while (stv0900_get_bits(i_params, F0900_P1_FIFO_FULL))
- ;/* checkpatch complains */
- stv0900_write_reg(i_params, R0900_P1_DISTXDATA, Data[i]);
- i++;
- }
+ stv0900_write_bits(intp, DIS_PRECHARGE, 1);
+ while (i < NbData) {
+ while (stv0900_get_bits(intp, FIFO_FULL))
+ ;/* checkpatch complains */
+ stv0900_write_reg(intp, DISTXDATA, data[i]);
+ i++;
+ }
- stv0900_write_bits(i_params, F0900_P1_DIS_PRECHARGE, 0);
- i = 0;
- while ((stv0900_get_bits(i_params, F0900_P1_TX_IDLE) != 1) && (i < 10)) {
- msleep(10);
- i++;
- }
-
- break;
- case STV0900_DEMOD_2:
- stv0900_write_bits(i_params, F0900_P2_DIS_PRECHARGE, 1);
-
- while (i < NbData) {
- while (stv0900_get_bits(i_params, F0900_P2_FIFO_FULL))
- ;/* checkpatch complains */
- stv0900_write_reg(i_params, R0900_P2_DISTXDATA, Data[i]);
- i++;
- }
-
- stv0900_write_bits(i_params, F0900_P2_DIS_PRECHARGE, 0);
- i = 0;
- while ((stv0900_get_bits(i_params, F0900_P2_TX_IDLE) != 1) && (i < 10)) {
- msleep(10);
- i++;
- }
-
- break;
+ stv0900_write_bits(intp, DIS_PRECHARGE, 0);
+ i = 0;
+ while ((stv0900_get_bits(intp, TX_IDLE) != 1) && (i < 10)) {
+ msleep(10);
+ i++;
}
return 0;
@@ -1792,22 +1649,21 @@
static int stv0900_send_burst(struct dvb_frontend *fe, fe_sec_mini_cmd_t burst)
{
struct stv0900_state *state = fe->demodulator_priv;
- struct stv0900_internal *i_params = state->internal;
+ struct stv0900_internal *intp = state->internal;
enum fe_stv0900_demod_num demod = state->demod;
- s32 mode_field;
- u32 diseqc_fifo;
+ u8 data;
- dmd_reg(mode_field, F0900_P1_DISTX_MODE, F0900_P2_DISTX_MODE);
- dmd_reg(diseqc_fifo, R0900_P1_DISTXDATA, R0900_P2_DISTXDATA);
switch (burst) {
case SEC_MINI_A:
- stv0900_write_bits(i_params, mode_field, 3);/* Unmodulated */
- stv0900_write_reg(i_params, diseqc_fifo, 0x00);
+ stv0900_write_bits(intp, DISTX_MODE, 3);/* Unmodulated */
+ data = 0x00;
+ stv0900_diseqc_send(intp, &data, 1, state->demod);
break;
case SEC_MINI_B:
- stv0900_write_bits(i_params, mode_field, 2);/* Modulated */
- stv0900_write_reg(i_params, diseqc_fifo, 0xff);
+ stv0900_write_bits(intp, DISTX_MODE, 2);/* Modulated */
+ data = 0xff;
+ stv0900_diseqc_send(intp, &data, 1, state->demod);
break;
}
@@ -1818,68 +1674,54 @@
struct dvb_diseqc_slave_reply *reply)
{
struct stv0900_state *state = fe->demodulator_priv;
- struct stv0900_internal *i_params = state->internal;
+ struct stv0900_internal *intp = state->internal;
+ enum fe_stv0900_demod_num demod = state->demod;
s32 i = 0;
- switch (state->demod) {
- case STV0900_DEMOD_1:
- default:
- reply->msg_len = 0;
+ reply->msg_len = 0;
- while ((stv0900_get_bits(i_params, F0900_P1_RX_END) != 1) && (i < 10)) {
- msleep(10);
- i++;
- }
+ while ((stv0900_get_bits(intp, RX_END) != 1) && (i < 10)) {
+ msleep(10);
+ i++;
+ }
- if (stv0900_get_bits(i_params, F0900_P1_RX_END)) {
- reply->msg_len = stv0900_get_bits(i_params, F0900_P1_FIFO_BYTENBR);
+ if (stv0900_get_bits(intp, RX_END)) {
+ reply->msg_len = stv0900_get_bits(intp, FIFO_BYTENBR);
- for (i = 0; i < reply->msg_len; i++)
- reply->msg[i] = stv0900_read_reg(i_params, R0900_P1_DISRXDATA);
- }
- break;
- case STV0900_DEMOD_2:
- reply->msg_len = 0;
-
- while ((stv0900_get_bits(i_params, F0900_P2_RX_END) != 1) && (i < 10)) {
- msleep(10);
- i++;
- }
-
- if (stv0900_get_bits(i_params, F0900_P2_RX_END)) {
- reply->msg_len = stv0900_get_bits(i_params, F0900_P2_FIFO_BYTENBR);
-
- for (i = 0; i < reply->msg_len; i++)
- reply->msg[i] = stv0900_read_reg(i_params, R0900_P2_DISRXDATA);
- }
- break;
+ for (i = 0; i < reply->msg_len; i++)
+ reply->msg[i] = stv0900_read_reg(intp, DISRXDATA);
}
return 0;
}
-static int stv0900_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone)
+static int stv0900_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t toneoff)
{
struct stv0900_state *state = fe->demodulator_priv;
- struct stv0900_internal *i_params = state->internal;
+ struct stv0900_internal *intp = state->internal;
enum fe_stv0900_demod_num demod = state->demod;
- s32 mode_field, reset_field;
- dprintk(KERN_INFO "%s: %s\n", __func__, ((tone == 0) ? "Off" : "On"));
+ dprintk("%s: %s\n", __func__, ((toneoff == 0) ? "On" : "Off"));
- dmd_reg(mode_field, F0900_P1_DISTX_MODE, F0900_P2_DISTX_MODE);
- dmd_reg(reset_field, F0900_P1_DISEQC_RESET, F0900_P2_DISEQC_RESET);
-
- if (tone) {
- /*Set the DiseqC mode to 22Khz continues tone*/
- stv0900_write_bits(i_params, mode_field, 0);
- stv0900_write_bits(i_params, reset_field, 1);
+ switch (toneoff) {
+ case SEC_TONE_ON:
+ /*Set the DiseqC mode to 22Khz _continues_ tone*/
+ stv0900_write_bits(intp, DISTX_MODE, 0);
+ stv0900_write_bits(intp, DISEQC_RESET, 1);
/*release DiseqC reset to enable the 22KHz tone*/
- stv0900_write_bits(i_params, reset_field, 0);
- } else {
- stv0900_write_bits(i_params, mode_field, 0);
+ stv0900_write_bits(intp, DISEQC_RESET, 0);
+ break;
+ case SEC_TONE_OFF:
+ /*return diseqc mode to config->diseqc_mode.
+ Usually it's without _continues_ tone */
+ stv0900_write_bits(intp, DISTX_MODE,
+ state->config->diseqc_mode);
/*maintain the DiseqC reset to disable the 22KHz tone*/
- stv0900_write_bits(i_params, reset_field, 1);
+ stv0900_write_bits(intp, DISEQC_RESET, 1);
+ stv0900_write_bits(intp, DISEQC_RESET, 0);
+ break;
+ default:
+ return -EINVAL;
}
return 0;
@@ -1889,11 +1731,11 @@
{
struct stv0900_state *state = fe->demodulator_priv;
- dprintk(KERN_INFO "%s\n", __func__);
+ dprintk("%s\n", __func__);
if ((--(state->internal->dmds_used)) <= 0) {
- dprintk(KERN_INFO "%s: Actually removing\n", __func__);
+ dprintk("%s: Actually removing\n", __func__);
remove_inode(state->internal);
kfree(state->internal);
@@ -1963,17 +1805,17 @@
case 0:
case 1:
init_params.dmd_ref_clk = config->xtal;
- init_params.demod_mode = STV0900_DUAL;
+ init_params.demod_mode = config->demod_mode;
init_params.rolloff = STV0900_35;
init_params.path1_ts_clock = config->path1_mode;
init_params.tun1_maddress = config->tun1_maddress;
- init_params.tun1_iq_inversion = STV0900_IQ_NORMAL;
+ init_params.tun1_iq_inv = STV0900_IQ_NORMAL;
init_params.tuner1_adc = config->tun1_adc;
init_params.path2_ts_clock = config->path2_mode;
init_params.ts_config = config->ts_config_regs;
init_params.tun2_maddress = config->tun2_maddress;
init_params.tuner2_adc = config->tun2_adc;
- init_params.tun2_iq_inversion = STV0900_IQ_SWAPPED;
+ init_params.tun2_iq_inv = STV0900_IQ_SWAPPED;
err_stv0900 = stv0900_init_internal(&state->frontend,
&init_params);
diff --git a/drivers/media/dvb/frontends/stv0900_init.h b/drivers/media/dvb/frontends/stv0900_init.h
index ff388b4..b684df9 100644
--- a/drivers/media/dvb/frontends/stv0900_init.h
+++ b/drivers/media/dvb/frontends/stv0900_init.h
@@ -141,85 +141,228 @@
};
+struct stv0900_short_frames_car_loop_optim_vs_mod {
+ enum fe_stv0900_modulation modulation;
+ u8 car_loop_2; /* SR<3msps */
+ u8 car_loop_5; /* 3<SR<=7msps */
+ u8 car_loop_10; /* 7<SR<=15msps */
+ u8 car_loop_20; /* 10<SR<=25msps */
+ u8 car_loop_30; /* 10<SR<=45msps */
+};
+
/* Cut 1.x Tracking carrier loop carrier QPSK 1/2 to 8PSK 9/10 long Frame */
-static const struct stv0900_car_loop_optim FE_STV0900_S2CarLoop[14] = {
- /*Modcod 2MPon 2MPoff 5MPon 5MPoff 10MPon 10MPoff 20MPon 20MPoff 30MPon 30MPoff */
- { STV0900_QPSK_12, 0x1C, 0x0D, 0x1B, 0x2C, 0x3A, 0x1C, 0x2A, 0x3B, 0x2A, 0x1B },
- { STV0900_QPSK_35, 0x2C, 0x0D, 0x2B, 0x2C, 0x3A, 0x0C, 0x3A, 0x2B, 0x2A, 0x0B },
- { STV0900_QPSK_23, 0x2C, 0x0D, 0x2B, 0x2C, 0x0B, 0x0C, 0x3A, 0x1B, 0x2A, 0x3A },
- { STV0900_QPSK_34, 0x3C, 0x0D, 0x3B, 0x1C, 0x0B, 0x3B, 0x3A, 0x0B, 0x2A, 0x3A },
- { STV0900_QPSK_45, 0x3C, 0x0D, 0x3B, 0x1C, 0x0B, 0x3B, 0x3A, 0x0B, 0x2A, 0x3A },
- { STV0900_QPSK_56, 0x0D, 0x0D, 0x3B, 0x1C, 0x0B, 0x3B, 0x3A, 0x0B, 0x2A, 0x3A },
- { STV0900_QPSK_89, 0x0D, 0x0D, 0x3B, 0x1C, 0x1B, 0x3B, 0x3A, 0x0B, 0x2A, 0x3A },
- { STV0900_QPSK_910, 0x1D, 0x0D, 0x3B, 0x1C, 0x1B, 0x3B, 0x3A, 0x0B, 0x2A, 0x3A },
- { STV0900_8PSK_35, 0x29, 0x3B, 0x09, 0x2B, 0x38, 0x0B, 0x18, 0x1A, 0x08, 0x0A },
- { STV0900_8PSK_23, 0x0A, 0x3B, 0x29, 0x2B, 0x19, 0x0B, 0x38, 0x1A, 0x18, 0x0A },
- { STV0900_8PSK_34, 0x3A, 0x3B, 0x2A, 0x2B, 0x39, 0x0B, 0x19, 0x1A, 0x38, 0x0A },
- { STV0900_8PSK_56, 0x1B, 0x3B, 0x0B, 0x2B, 0x1A, 0x0B, 0x39, 0x1A, 0x19, 0x0A },
- { STV0900_8PSK_89, 0x3B, 0x3B, 0x0B, 0x2B, 0x2A, 0x0B, 0x39, 0x1A, 0x29, 0x39 },
- { STV0900_8PSK_910, 0x3B, 0x3B, 0x0B, 0x2B, 0x2A, 0x0B, 0x39, 0x1A, 0x29, 0x39 }
+static const struct stv0900_car_loop_optim FE_STV0900_S2CarLoop[14] = {
+ /*Modcod 2MPon 2MPoff 5MPon 5MPoff 10MPon
+ 10MPoff 20MPon 20MPoff 30MPon 30MPoff */
+ { STV0900_QPSK_12, 0x1C, 0x0D, 0x1B, 0x2C, 0x3A,
+ 0x1C, 0x2A, 0x3B, 0x2A, 0x1B },
+ { STV0900_QPSK_35, 0x2C, 0x0D, 0x2B, 0x2C, 0x3A,
+ 0x0C, 0x3A, 0x2B, 0x2A, 0x0B },
+ { STV0900_QPSK_23, 0x2C, 0x0D, 0x2B, 0x2C, 0x0B,
+ 0x0C, 0x3A, 0x1B, 0x2A, 0x3A },
+ { STV0900_QPSK_34, 0x3C, 0x0D, 0x3B, 0x1C, 0x0B,
+ 0x3B, 0x3A, 0x0B, 0x2A, 0x3A },
+ { STV0900_QPSK_45, 0x3C, 0x0D, 0x3B, 0x1C, 0x0B,
+ 0x3B, 0x3A, 0x0B, 0x2A, 0x3A },
+ { STV0900_QPSK_56, 0x0D, 0x0D, 0x3B, 0x1C, 0x0B,
+ 0x3B, 0x3A, 0x0B, 0x2A, 0x3A },
+ { STV0900_QPSK_89, 0x0D, 0x0D, 0x3B, 0x1C, 0x1B,
+ 0x3B, 0x3A, 0x0B, 0x2A, 0x3A },
+ { STV0900_QPSK_910, 0x1D, 0x0D, 0x3B, 0x1C, 0x1B,
+ 0x3B, 0x3A, 0x0B, 0x2A, 0x3A },
+ { STV0900_8PSK_35, 0x29, 0x3B, 0x09, 0x2B, 0x38,
+ 0x0B, 0x18, 0x1A, 0x08, 0x0A },
+ { STV0900_8PSK_23, 0x0A, 0x3B, 0x29, 0x2B, 0x19,
+ 0x0B, 0x38, 0x1A, 0x18, 0x0A },
+ { STV0900_8PSK_34, 0x3A, 0x3B, 0x2A, 0x2B, 0x39,
+ 0x0B, 0x19, 0x1A, 0x38, 0x0A },
+ { STV0900_8PSK_56, 0x1B, 0x3B, 0x0B, 0x2B, 0x1A,
+ 0x0B, 0x39, 0x1A, 0x19, 0x0A },
+ { STV0900_8PSK_89, 0x3B, 0x3B, 0x0B, 0x2B, 0x2A,
+ 0x0B, 0x39, 0x1A, 0x29, 0x39 },
+ { STV0900_8PSK_910, 0x3B, 0x3B, 0x0B, 0x2B, 0x2A,
+ 0x0B, 0x39, 0x1A, 0x29, 0x39 }
};
/* Cut 2.0 Tracking carrier loop carrier QPSK 1/2 to 8PSK 9/10 long Frame */
-static const struct stv0900_car_loop_optim FE_STV0900_S2CarLoopCut20[14] = {
- /* Modcod 2MPon 2MPoff 5MPon 5MPoff 10MPon 10MPoff 20MPon 20MPoff 30MPon 30MPoff */
- { STV0900_QPSK_12, 0x1F, 0x3F, 0x1E, 0x3F, 0x3D, 0x1F, 0x3D, 0x3E, 0x3D, 0x1E },
- { STV0900_QPSK_35, 0x2F, 0x3F, 0x2E, 0x2F, 0x3D, 0x0F, 0x0E, 0x2E, 0x3D, 0x0E },
- { STV0900_QPSK_23, 0x2F, 0x3F, 0x2E, 0x2F, 0x0E, 0x0F, 0x0E, 0x1E, 0x3D, 0x3D },
- { STV0900_QPSK_34, 0x3F, 0x3F, 0x3E, 0x1F, 0x0E, 0x3E, 0x0E, 0x1E, 0x3D, 0x3D },
- { STV0900_QPSK_45, 0x3F, 0x3F, 0x3E, 0x1F, 0x0E, 0x3E, 0x0E, 0x1E, 0x3D, 0x3D },
- { STV0900_QPSK_56, 0x3F, 0x3F, 0x3E, 0x1F, 0x0E, 0x3E, 0x0E, 0x1E, 0x3D, 0x3D },
- { STV0900_QPSK_89, 0x3F, 0x3F, 0x3E, 0x1F, 0x1E, 0x3E, 0x0E, 0x1E, 0x3D, 0x3D },
- { STV0900_QPSK_910, 0x3F, 0x3F, 0x3E, 0x1F, 0x1E, 0x3E, 0x0E, 0x1E, 0x3D, 0x3D },
- { STV0900_8PSK_35, 0x3c, 0x0c, 0x1c, 0x3b, 0x0c, 0x3b, 0x2b, 0x2b, 0x1b, 0x2b },
- { STV0900_8PSK_23, 0x1d, 0x0c, 0x3c, 0x0c, 0x2c, 0x3b, 0x0c, 0x2b, 0x2b, 0x2b },
- { STV0900_8PSK_34, 0x0e, 0x1c, 0x3d, 0x0c, 0x0d, 0x3b, 0x2c, 0x3b, 0x0c, 0x2b },
- { STV0900_8PSK_56, 0x2e, 0x3e, 0x1e, 0x2e, 0x2d, 0x1e, 0x3c, 0x2d, 0x2c, 0x1d },
- { STV0900_8PSK_89, 0x3e, 0x3e, 0x1e, 0x2e, 0x3d, 0x1e, 0x0d, 0x2d, 0x3c, 0x1d },
- { STV0900_8PSK_910, 0x3e, 0x3e, 0x1e, 0x2e, 0x3d, 0x1e, 0x1d, 0x2d, 0x0d, 0x1d }
+static const struct stv0900_car_loop_optim FE_STV0900_S2CarLoopCut20[14] = {
+ /* Modcod 2MPon 2MPoff 5MPon 5MPoff 10MPon
+ 10MPoff 20MPon 20MPoff 30MPon 30MPoff */
+ { STV0900_QPSK_12, 0x1F, 0x3F, 0x1E, 0x3F, 0x3D,
+ 0x1F, 0x3D, 0x3E, 0x3D, 0x1E },
+ { STV0900_QPSK_35, 0x2F, 0x3F, 0x2E, 0x2F, 0x3D,
+ 0x0F, 0x0E, 0x2E, 0x3D, 0x0E },
+ { STV0900_QPSK_23, 0x2F, 0x3F, 0x2E, 0x2F, 0x0E,
+ 0x0F, 0x0E, 0x1E, 0x3D, 0x3D },
+ { STV0900_QPSK_34, 0x3F, 0x3F, 0x3E, 0x1F, 0x0E,
+ 0x3E, 0x0E, 0x1E, 0x3D, 0x3D },
+ { STV0900_QPSK_45, 0x3F, 0x3F, 0x3E, 0x1F, 0x0E,
+ 0x3E, 0x0E, 0x1E, 0x3D, 0x3D },
+ { STV0900_QPSK_56, 0x3F, 0x3F, 0x3E, 0x1F, 0x0E,
+ 0x3E, 0x0E, 0x1E, 0x3D, 0x3D },
+ { STV0900_QPSK_89, 0x3F, 0x3F, 0x3E, 0x1F, 0x1E,
+ 0x3E, 0x0E, 0x1E, 0x3D, 0x3D },
+ { STV0900_QPSK_910, 0x3F, 0x3F, 0x3E, 0x1F, 0x1E,
+ 0x3E, 0x0E, 0x1E, 0x3D, 0x3D },
+ { STV0900_8PSK_35, 0x3c, 0x0c, 0x1c, 0x3b, 0x0c,
+ 0x3b, 0x2b, 0x2b, 0x1b, 0x2b },
+ { STV0900_8PSK_23, 0x1d, 0x0c, 0x3c, 0x0c, 0x2c,
+ 0x3b, 0x0c, 0x2b, 0x2b, 0x2b },
+ { STV0900_8PSK_34, 0x0e, 0x1c, 0x3d, 0x0c, 0x0d,
+ 0x3b, 0x2c, 0x3b, 0x0c, 0x2b },
+ { STV0900_8PSK_56, 0x2e, 0x3e, 0x1e, 0x2e, 0x2d,
+ 0x1e, 0x3c, 0x2d, 0x2c, 0x1d },
+ { STV0900_8PSK_89, 0x3e, 0x3e, 0x1e, 0x2e, 0x3d,
+ 0x1e, 0x0d, 0x2d, 0x3c, 0x1d },
+ { STV0900_8PSK_910, 0x3e, 0x3e, 0x1e, 0x2e, 0x3d,
+ 0x1e, 0x1d, 0x2d, 0x0d, 0x1d },
};
/* Cut 2.0 Tracking carrier loop carrier 16APSK 2/3 to 32APSK 9/10 long Frame */
static const struct stv0900_car_loop_optim FE_STV0900_S2APSKCarLoopCut20[11] = {
- /* Modcod 2MPon 2MPoff 5MPon 5MPoff 10MPon 10MPoff 20MPon 20MPoff 30MPon 30MPoff */
- { STV0900_16APSK_23, 0x0C, 0x0C, 0x0C, 0x0C, 0x1D, 0x0C, 0x3C, 0x0C, 0x2C, 0x0C },
- { STV0900_16APSK_34, 0x0C, 0x0C, 0x0C, 0x0C, 0x0E, 0x0C, 0x2D, 0x0C, 0x1D, 0x0C },
- { STV0900_16APSK_45, 0x0C, 0x0C, 0x0C, 0x0C, 0x1E, 0x0C, 0x3D, 0x0C, 0x2D, 0x0C },
- { STV0900_16APSK_56, 0x0C, 0x0C, 0x0C, 0x0C, 0x1E, 0x0C, 0x3D, 0x0C, 0x2D, 0x0C },
- { STV0900_16APSK_89, 0x0C, 0x0C, 0x0C, 0x0C, 0x2E, 0x0C, 0x0E, 0x0C, 0x3D, 0x0C },
- { STV0900_16APSK_910, 0x0C, 0x0C, 0x0C, 0x0C, 0x2E, 0x0C, 0x0E, 0x0C, 0x3D, 0x0C },
- { STV0900_32APSK_34, 0x0C, 0x0C, 0x0C, 0x0C, 0x0C, 0x0C, 0x0C, 0x0C, 0x0C, 0x0C },
- { STV0900_32APSK_45, 0x0C, 0x0C, 0x0C, 0x0C, 0x0C, 0x0C, 0x0C, 0x0C, 0x0C, 0x0C },
- { STV0900_32APSK_56, 0x0C, 0x0C, 0x0C, 0x0C, 0x0C, 0x0C, 0x0C, 0x0C, 0x0C, 0x0C },
- { STV0900_32APSK_89, 0x0C, 0x0C, 0x0C, 0x0C, 0x0C, 0x0C, 0x0C, 0x0C, 0x0C, 0x0C },
- { STV0900_32APSK_910, 0x0C, 0x0C, 0x0C, 0x0C, 0x0C, 0x0C, 0x0C, 0x0C, 0x0C, 0x0C }
+ /* Modcod 2MPon 2MPoff 5MPon 5MPoff 10MPon
+ 10MPoff 20MPon 20MPoff 30MPon 30MPoff */
+ { STV0900_16APSK_23, 0x0C, 0x0C, 0x0C, 0x0C, 0x1D,
+ 0x0C, 0x3C, 0x0C, 0x2C, 0x0C },
+ { STV0900_16APSK_34, 0x0C, 0x0C, 0x0C, 0x0C, 0x0E,
+ 0x0C, 0x2D, 0x0C, 0x1D, 0x0C },
+ { STV0900_16APSK_45, 0x0C, 0x0C, 0x0C, 0x0C, 0x1E,
+ 0x0C, 0x3D, 0x0C, 0x2D, 0x0C },
+ { STV0900_16APSK_56, 0x0C, 0x0C, 0x0C, 0x0C, 0x1E,
+ 0x0C, 0x3D, 0x0C, 0x2D, 0x0C },
+ { STV0900_16APSK_89, 0x0C, 0x0C, 0x0C, 0x0C, 0x2E,
+ 0x0C, 0x0E, 0x0C, 0x3D, 0x0C },
+ { STV0900_16APSK_910, 0x0C, 0x0C, 0x0C, 0x0C, 0x2E,
+ 0x0C, 0x0E, 0x0C, 0x3D, 0x0C },
+ { STV0900_32APSK_34, 0x0C, 0x0C, 0x0C, 0x0C, 0x0C,
+ 0x0C, 0x0C, 0x0C, 0x0C, 0x0C },
+ { STV0900_32APSK_45, 0x0C, 0x0C, 0x0C, 0x0C, 0x0C,
+ 0x0C, 0x0C, 0x0C, 0x0C, 0x0C },
+ { STV0900_32APSK_56, 0x0C, 0x0C, 0x0C, 0x0C, 0x0C,
+ 0x0C, 0x0C, 0x0C, 0x0C, 0x0C },
+ { STV0900_32APSK_89, 0x0C, 0x0C, 0x0C, 0x0C, 0x0C,
+ 0x0C, 0x0C, 0x0C, 0x0C, 0x0C },
+ { STV0900_32APSK_910, 0x0C, 0x0C, 0x0C, 0x0C, 0x0C,
+ 0x0C, 0x0C, 0x0C, 0x0C, 0x0C },
};
/* Cut 2.0 Tracking carrier loop carrier QPSK 1/4 to QPSK 2/5 long Frame */
static const struct stv0900_car_loop_optim FE_STV0900_S2LowQPCarLoopCut20[3] = {
- /* Modcod 2MPon 2MPoff 5MPon 5MPoff 10MPon 10MPoff 20MPon 20MPoff 30MPon 30MPoff */
- { STV0900_QPSK_14, 0x0F, 0x3F, 0x0E, 0x3F, 0x2D, 0x2F, 0x2D, 0x1F, 0x3D, 0x3E },
- { STV0900_QPSK_13, 0x0F, 0x3F, 0x0E, 0x3F, 0x2D, 0x2F, 0x3D, 0x0F, 0x3D, 0x2E },
- { STV0900_QPSK_25, 0x1F, 0x3F, 0x1E, 0x3F, 0x3D, 0x1F, 0x3D, 0x3E, 0x3D, 0x2E }
+ /* Modcod 2MPon 2MPoff 5MPon 5MPoff 10MPon
+ 10MPoff 20MPon 20MPoff 30MPon 30MPoff */
+ { STV0900_QPSK_14, 0x0F, 0x3F, 0x0E, 0x3F, 0x2D,
+ 0x2F, 0x2D, 0x1F, 0x3D, 0x3E },
+ { STV0900_QPSK_13, 0x0F, 0x3F, 0x0E, 0x3F, 0x2D,
+ 0x2F, 0x3D, 0x0F, 0x3D, 0x2E },
+ { STV0900_QPSK_25, 0x1F, 0x3F, 0x1E, 0x3F, 0x3D,
+ 0x1F, 0x3D, 0x3E, 0x3D, 0x2E }
};
/* Cut 2.0 Tracking carrier loop carrier short Frame, cut 1.2 and 2.0 */
-static const struct stv0900_short_frames_car_loop_optim FE_STV0900_S2ShortCarLoop[4] = {
- /*Mod 2M_cut1.2 2M_cut2.0 5M_cut1.2 5M_cut2.0 10M_cut1.2 10M_cut2.0 20M_cut1.2 20M_cut2.0 30M_cut1.2 30M_cut2.0 */
- { STV0900_QPSK, 0x3C, 0x2F, 0x2B, 0x2E, 0x0B, 0x0E, 0x3A, 0x0E, 0x2A, 0x3D },
- { STV0900_8PSK, 0x0B, 0x3E, 0x2A, 0x0E, 0x0A, 0x2D, 0x19, 0x0D, 0x09, 0x3C },
- { STV0900_16APSK, 0x1B, 0x1E, 0x1B, 0x1E, 0x1B, 0x1E, 0x3A, 0x3D, 0x2A, 0x2D },
- { STV0900_32APSK, 0x1B, 0x1E, 0x1B, 0x1E, 0x1B, 0x1E, 0x3A, 0x3D, 0x2A, 0x2D }
+static const
+struct stv0900_short_frames_car_loop_optim FE_STV0900_S2ShortCarLoop[4] = {
+ /*Mod 2Mcut1.2 2Mcut2.0 5Mcut1.2 5Mcut2.0 10Mcut1.2
+ 10Mcut2.0 20Mcut1.2 20M_cut2.0 30Mcut1.2 30Mcut2.0*/
+ { STV0900_QPSK, 0x3C, 0x2F, 0x2B, 0x2E, 0x0B,
+ 0x0E, 0x3A, 0x0E, 0x2A, 0x3D },
+ { STV0900_8PSK, 0x0B, 0x3E, 0x2A, 0x0E, 0x0A,
+ 0x2D, 0x19, 0x0D, 0x09, 0x3C },
+ { STV0900_16APSK, 0x1B, 0x1E, 0x1B, 0x1E, 0x1B,
+ 0x1E, 0x3A, 0x3D, 0x2A, 0x2D },
+ { STV0900_32APSK, 0x1B, 0x1E, 0x1B, 0x1E, 0x1B,
+ 0x1E, 0x3A, 0x3D, 0x2A, 0x2D }
};
-static const u16 STV0900_InitVal[182][2] = {
+static const struct stv0900_car_loop_optim FE_STV0900_S2CarLoopCut30[14] = {
+ /*Modcod 2MPon 2MPoff 5MPon 5MPoff 10MPon
+ 10MPoff 20MPon 20MPoff 30MPon 30MPoff */
+ { STV0900_QPSK_12, 0x3C, 0x2C, 0x0C, 0x2C, 0x1B,
+ 0x2C, 0x1B, 0x1C, 0x0B, 0x3B },
+ { STV0900_QPSK_35, 0x0D, 0x0D, 0x0C, 0x0D, 0x1B,
+ 0x3C, 0x1B, 0x1C, 0x0B, 0x3B },
+ { STV0900_QPSK_23, 0x1D, 0x0D, 0x0C, 0x1D, 0x2B,
+ 0x3C, 0x1B, 0x1C, 0x0B, 0x3B },
+ { STV0900_QPSK_34, 0x1D, 0x1D, 0x0C, 0x1D, 0x2B,
+ 0x3C, 0x1B, 0x1C, 0x0B, 0x3B },
+ { STV0900_QPSK_45, 0x2D, 0x1D, 0x1C, 0x1D, 0x2B,
+ 0x3C, 0x2B, 0x0C, 0x1B, 0x3B },
+ { STV0900_QPSK_56, 0x2D, 0x1D, 0x1C, 0x1D, 0x2B,
+ 0x3C, 0x2B, 0x0C, 0x1B, 0x3B },
+ { STV0900_QPSK_89, 0x3D, 0x2D, 0x1C, 0x1D, 0x3B,
+ 0x3C, 0x2B, 0x0C, 0x1B, 0x3B },
+ { STV0900_QPSK_910, 0x3D, 0x2D, 0x1C, 0x1D, 0x3B,
+ 0x3C, 0x2B, 0x0C, 0x1B, 0x3B },
+ { STV0900_8PSK_35, 0x39, 0x19, 0x39, 0x19, 0x19,
+ 0x19, 0x19, 0x19, 0x09, 0x19 },
+ { STV0900_8PSK_23, 0x2A, 0x39, 0x1A, 0x0A, 0x39,
+ 0x0A, 0x29, 0x39, 0x29, 0x0A },
+ { STV0900_8PSK_34, 0x0B, 0x3A, 0x0B, 0x0B, 0x3A,
+ 0x1B, 0x1A, 0x0B, 0x1A, 0x3A },
+ { STV0900_8PSK_56, 0x0C, 0x1B, 0x3B, 0x2B, 0x1B,
+ 0x3B, 0x3A, 0x3B, 0x3A, 0x1B },
+ { STV0900_8PSK_89, 0x2C, 0x2C, 0x2C, 0x1C, 0x2B,
+ 0x0C, 0x0B, 0x3B, 0x0B, 0x1B },
+ { STV0900_8PSK_910, 0x2C, 0x3C, 0x2C, 0x1C, 0x3B,
+ 0x1C, 0x0B, 0x3B, 0x0B, 0x1B }
+};
+
+static const
+struct stv0900_car_loop_optim FE_STV0900_S2APSKCarLoopCut30[11] = {
+ /*Modcod 2MPon 2MPoff 5MPon 5MPoff 10MPon
+ 10MPoff 20MPon 20MPoff 30MPon 30MPoff */
+ { STV0900_16APSK_23, 0x0A, 0x0A, 0x0A, 0x0A, 0x1A,
+ 0x0A, 0x3A, 0x0A, 0x2A, 0x0A },
+ { STV0900_16APSK_34, 0x0A, 0x0A, 0x0A, 0x0A, 0x0B,
+ 0x0A, 0x3B, 0x0A, 0x1B, 0x0A },
+ { STV0900_16APSK_45, 0x0A, 0x0A, 0x0A, 0x0A, 0x1B,
+ 0x0A, 0x3B, 0x0A, 0x2B, 0x0A },
+ { STV0900_16APSK_56, 0x0A, 0x0A, 0x0A, 0x0A, 0x1B,
+ 0x0A, 0x3B, 0x0A, 0x2B, 0x0A },
+ { STV0900_16APSK_89, 0x0A, 0x0A, 0x0A, 0x0A, 0x2B,
+ 0x0A, 0x0C, 0x0A, 0x3B, 0x0A },
+ { STV0900_16APSK_910, 0x0A, 0x0A, 0x0A, 0x0A, 0x2B,
+ 0x0A, 0x0C, 0x0A, 0x3B, 0x0A },
+ { STV0900_32APSK_34, 0x0A, 0x0A, 0x0A, 0x0A, 0x0A,
+ 0x0A, 0x0A, 0x0A, 0x0A, 0x0A },
+ { STV0900_32APSK_45, 0x0A, 0x0A, 0x0A, 0x0A, 0x0A,
+ 0x0A, 0x0A, 0x0A, 0x0A, 0x0A },
+ { STV0900_32APSK_56, 0x0A, 0x0A, 0x0A, 0x0A, 0x0A,
+ 0x0A, 0x0A, 0x0A, 0x0A, 0x0A },
+ { STV0900_32APSK_89, 0x0A, 0x0A, 0x0A, 0x0A, 0x0A,
+ 0x0A, 0x0A, 0x0A, 0x0A, 0x0A },
+ { STV0900_32APSK_910, 0x0A, 0x0A, 0x0A, 0x0A, 0x0A,
+ 0x0A, 0x0A, 0x0A, 0x0A, 0x0A }
+};
+
+static const
+struct stv0900_car_loop_optim FE_STV0900_S2LowQPCarLoopCut30[3] = {
+ /*Modcod 2MPon 2MPoff 5MPon 5MPoff 10MPon
+ 10MPoff 20MPon 20MPoff 30MPon 30MPoff*/
+ { STV0900_QPSK_14, 0x0C, 0x3C, 0x0B, 0x3C, 0x2A,
+ 0x2C, 0x2A, 0x1C, 0x3A, 0x3B },
+ { STV0900_QPSK_13, 0x0C, 0x3C, 0x0B, 0x3C, 0x2A,
+ 0x2C, 0x3A, 0x0C, 0x3A, 0x2B },
+ { STV0900_QPSK_25, 0x1C, 0x3C, 0x1B, 0x3C, 0x3A,
+ 0x1C, 0x3A, 0x3B, 0x3A, 0x2B }
+};
+
+static const struct stv0900_short_frames_car_loop_optim_vs_mod
+FE_STV0900_S2ShortCarLoopCut30[4] = {
+ /*Mod 2Mcut3.0 5Mcut3.0 10Mcut3.0 20Mcut3.0 30Mcut3.0*/
+ { STV0900_QPSK, 0x2C, 0x2B, 0x0B, 0x0B, 0x3A },
+ { STV0900_8PSK, 0x3B, 0x0B, 0x2A, 0x0A, 0x39 },
+ { STV0900_16APSK, 0x1B, 0x1B, 0x1B, 0x3A, 0x2A },
+ { STV0900_32APSK, 0x1B, 0x1B, 0x1B, 0x3A, 0x2A },
+
+};
+
+static const u16 STV0900_InitVal[181][2] = {
{ R0900_OUTCFG , 0x00 },
- { R0900_MODECFG , 0xff },
{ R0900_AGCRF1CFG , 0x11 },
{ R0900_AGCRF2CFG , 0x13 },
{ R0900_TSGENERAL1X , 0x14 },
@@ -381,7 +524,7 @@
{ R0900_GAINLLR_NF15 , 0x1A },
{ R0900_GAINLLR_NF16 , 0x1F },
{ R0900_GAINLLR_NF17 , 0x21 },
- { R0900_RCCFGH , 0x20 },
+ { R0900_RCCFG2 , 0x20 },
{ R0900_P1_FECM , 0x01 }, /*disable DSS modes*/
{ R0900_P2_FECM , 0x01 }, /*disable DSS modes*/
{ R0900_P1_PRVIT , 0x2F }, /*disable puncture rate 6/7*/
diff --git a/drivers/media/dvb/frontends/stv0900_priv.h b/drivers/media/dvb/frontends/stv0900_priv.h
index 5ed7a14..d8ba8a9 100644
--- a/drivers/media/dvb/frontends/stv0900_priv.h
+++ b/drivers/media/dvb/frontends/stv0900_priv.h
@@ -46,22 +46,6 @@
#define FALSE (!TRUE)
#endif
-#define dmd_reg(a, b, c) \
- do { \
- a = 0; \
- switch (demod) { \
- case STV0900_DEMOD_1: \
- default: \
- a = b; \
- break; \
- case STV0900_DEMOD_2: \
- a = c; \
- break; \
- } \
- } while (0)
-
-static int stvdebug;
-
#define dprintk(args...) \
do { \
if (stvdebug) \
@@ -70,6 +54,8 @@
#define STV0900_MAXLOOKUPSIZE 500
#define STV0900_BLIND_SEARCH_AGC2_TH 700
+#define STV0900_BLIND_SEARCH_AGC2_TH_CUT30 1400
+#define IQPOWER_THRESHOLD 30
/* One point of the lookup table */
struct stv000_lookpoint {
@@ -263,14 +249,14 @@
int tuner1_adc;
/* IQ from the tuner1 to the demod */
- enum stv0900_iq_inversion tun1_iq_inversion;
+ enum stv0900_iq_inversion tun1_iq_inv;
enum fe_stv0900_clock_type path2_ts_clock;
u8 tun2_maddress;
int tuner2_adc;
/* IQ from the tuner2 to the demod */
- enum stv0900_iq_inversion tun2_iq_inversion;
+ enum stv0900_iq_inversion tun2_iq_inv;
struct stv0900_reg *ts_config;
};
@@ -300,7 +286,7 @@
enum fe_stv0900_modcode modcode;
enum fe_stv0900_modulation modulation;
enum fe_stv0900_pilot pilot;
- enum fe_stv0900_frame_length frame_length;
+ enum fe_stv0900_frame_length frame_len;
enum stv0900_iq_inversion spectrum;
enum fe_stv0900_rolloff rolloff;
@@ -318,47 +304,25 @@
/* Demodulator use for single demod or for dual demod) */
enum fe_stv0900_demod_mode demod_mode;
- /*Demod 1*/
- s32 tuner1_freq;
- s32 tuner1_bw;
- s32 dmd1_symbol_rate;
- s32 dmd1_srch_range;
+ /*Demods */
+ s32 freq[2];
+ s32 bw[2];
+ s32 symbol_rate[2];
+ s32 srch_range[2];
/* algorithm for search Blind, Cold or Warm*/
- enum fe_stv0900_search_algo dmd1_srch_algo;
+ enum fe_stv0900_search_algo srch_algo[2];
/* search standard: Auto, DVBS1/DSS only or DVBS2 only*/
- enum fe_stv0900_search_standard dmd1_srch_standard;
+ enum fe_stv0900_search_standard srch_standard[2];
/* inversion search : auto, auto norma first, normal or inverted */
- enum fe_stv0900_search_iq dmd1_srch_iq_inv;
- enum fe_stv0900_modcode dmd1_modcode;
- enum fe_stv0900_modulation dmd1_modulation;
- enum fe_stv0900_fec dmd1_fec;
+ enum fe_stv0900_search_iq srch_iq_inv[2];
+ enum fe_stv0900_modcode modcode[2];
+ enum fe_stv0900_modulation modulation[2];
+ enum fe_stv0900_fec fec[2];
- struct stv0900_signal_info dmd1_rslts;
- enum fe_stv0900_signal_type dmd1_state;
+ struct stv0900_signal_info result[2];
+ enum fe_stv0900_error err[2];
- enum fe_stv0900_error dmd1_err;
-
- /*Demod 2*/
- s32 tuner2_freq;
- s32 tuner2_bw;
- s32 dmd2_symbol_rate;
- s32 dmd2_srch_range;
-
- enum fe_stv0900_search_algo dmd2_srch_algo;
- enum fe_stv0900_search_standard dmd2_srch_stndrd;
- /* inversion search : auto, auto normal first, normal or inverted */
- enum fe_stv0900_search_iq dmd2_srch_iq_inv;
- enum fe_stv0900_modcode dmd2_modcode;
- enum fe_stv0900_modulation dmd2_modulation;
- enum fe_stv0900_fec dmd2_fec;
-
- /* results of the search*/
- struct stv0900_signal_info dmd2_rslts;
- /* current state of the search algorithm */
- enum fe_stv0900_signal_type dmd2_state;
-
- enum fe_stv0900_error dmd2_err;
struct i2c_adapter *i2c_adap;
u8 i2c_addr;
@@ -379,6 +343,8 @@
int demod;
};
+extern int stvdebug;
+
extern s32 ge2comp(s32 a, s32 width);
extern void stv0900_write_reg(struct stv0900_internal *i_params,
@@ -418,13 +384,14 @@
extern void stv0900_stop_all_s2_modcod(struct stv0900_internal *i_params,
enum fe_stv0900_demod_num demod);
-extern void stv0900_activate_s2_modcode(struct stv0900_internal *i_params,
+extern void stv0900_activate_s2_modcod(struct stv0900_internal *i_params,
enum fe_stv0900_demod_num demod);
-extern void stv0900_activate_s2_modcode_single(struct stv0900_internal *i_params,
+extern void stv0900_activate_s2_modcod_single(struct stv0900_internal *i_params,
enum fe_stv0900_demod_num demod);
-extern enum fe_stv0900_tracking_standard stv0900_get_standard(struct dvb_frontend *fe,
+extern enum
+fe_stv0900_tracking_standard stv0900_get_standard(struct dvb_frontend *fe,
enum fe_stv0900_demod_num demod);
#endif
diff --git a/drivers/media/dvb/frontends/stv0900_reg.h b/drivers/media/dvb/frontends/stv0900_reg.h
index 264f9cf..7b8edf1 100644
--- a/drivers/media/dvb/frontends/stv0900_reg.h
+++ b/drivers/media/dvb/frontends/stv0900_reg.h
@@ -14,7 +14,7 @@
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
*
* GNU General Public License for more details.
*
@@ -26,3762 +26,3950 @@
#ifndef STV0900_REG_H
#define STV0900_REG_H
+extern s32 shiftx(s32 x, int demod, s32 shift);
+
+#define REGx(x) shiftx(x, demod, 0x200)
+#define FLDx(x) shiftx(x, demod, 0x2000000)
+
/*MID*/
-#define R0900_MID 0xf100
-#define F0900_MCHIP_IDENT 0xf10000f0
-#define F0900_MRELEASE 0xf100000f
+#define R0900_MID 0xf100
+#define F0900_MCHIP_IDENT 0xf10000f0
+#define F0900_MRELEASE 0xf100000f
/*DACR1*/
-#define R0900_DACR1 0xf113
-#define F0900_DAC_MODE 0xf11300e0
-#define F0900_DAC_VALUE1 0xf113000f
+#define R0900_DACR1 0xf113
+#define F0900_DAC_MODE 0xf11300e0
+#define F0900_DAC_VALUE1 0xf113000f
/*DACR2*/
-#define R0900_DACR2 0xf114
-#define F0900_DAC_VALUE0 0xf11400ff
+#define R0900_DACR2 0xf114
+#define F0900_DAC_VALUE0 0xf11400ff
/*OUTCFG*/
-#define R0900_OUTCFG 0xf11c
-#define F0900_INV_DATA6 0xf11c0080
-#define F0900_OUTSERRS1_HZ 0xf11c0040
-#define F0900_OUTSERRS2_HZ 0xf11c0020
-#define F0900_OUTSERRS3_HZ 0xf11c0010
-#define F0900_OUTPARRS3_HZ 0xf11c0008
-#define F0900_OUTHZ3_CONTROL 0xf11c0007
-
-/*MODECFG*/
-#define R0900_MODECFG 0xf11d
-#define F0900_FECSPY_SEL_2 0xf11d0020
-#define F0900_HWARE_SEL_2 0xf11d0010
-#define F0900_PKTDEL_SEL_2 0xf11d0008
-#define F0900_DISEQC_SEL_2 0xf11d0004
-#define F0900_VIT_SEL_2 0xf11d0002
-#define F0900_DEMOD_SEL_2 0xf11d0001
+#define R0900_OUTCFG 0xf11c
+#define F0900_OUTSERRS1_HZ 0xf11c0040
+#define F0900_OUTSERRS2_HZ 0xf11c0020
+#define F0900_OUTSERRS3_HZ 0xf11c0010
+#define F0900_OUTPARRS3_HZ 0xf11c0008
/*IRQSTATUS3*/
-#define R0900_IRQSTATUS3 0xf120
-#define F0900_SPLL_LOCK 0xf1200020
-#define F0900_SSTREAM_LCK_3 0xf1200010
-#define F0900_SSTREAM_LCK_2 0xf1200008
-#define F0900_SSTREAM_LCK_1 0xf1200004
-#define F0900_SDVBS1_PRF_2 0xf1200002
-#define F0900_SDVBS1_PRF_1 0xf1200001
+#define R0900_IRQSTATUS3 0xf120
+#define F0900_SPLL_LOCK 0xf1200020
+#define F0900_SSTREAM_LCK_3 0xf1200010
+#define F0900_SSTREAM_LCK_2 0xf1200008
+#define F0900_SSTREAM_LCK_1 0xf1200004
+#define F0900_SDVBS1_PRF_2 0xf1200002
+#define F0900_SDVBS1_PRF_1 0xf1200001
/*IRQSTATUS2*/
-#define R0900_IRQSTATUS2 0xf121
-#define F0900_SSPY_ENDSIM_3 0xf1210080
-#define F0900_SSPY_ENDSIM_2 0xf1210040
-#define F0900_SSPY_ENDSIM_1 0xf1210020
-#define F0900_SPKTDEL_ERROR_2 0xf1210010
-#define F0900_SPKTDEL_LOCKB_2 0xf1210008
-#define F0900_SPKTDEL_LOCK_2 0xf1210004
-#define F0900_SPKTDEL_ERROR_1 0xf1210002
-#define F0900_SPKTDEL_LOCKB_1 0xf1210001
+#define R0900_IRQSTATUS2 0xf121
+#define F0900_SSPY_ENDSIM_3 0xf1210080
+#define F0900_SSPY_ENDSIM_2 0xf1210040
+#define F0900_SSPY_ENDSIM_1 0xf1210020
+#define F0900_SPKTDEL_ERROR_2 0xf1210010
+#define F0900_SPKTDEL_LOCKB_2 0xf1210008
+#define F0900_SPKTDEL_LOCK_2 0xf1210004
+#define F0900_SPKTDEL_ERROR_1 0xf1210002
+#define F0900_SPKTDEL_LOCKB_1 0xf1210001
/*IRQSTATUS1*/
-#define R0900_IRQSTATUS1 0xf122
-#define F0900_SPKTDEL_LOCK_1 0xf1220080
-#define F0900_SEXTPINB2 0xf1220040
-#define F0900_SEXTPIN2 0xf1220020
-#define F0900_SEXTPINB1 0xf1220010
-#define F0900_SEXTPIN1 0xf1220008
-#define F0900_SDEMOD_LOCKB_2 0xf1220004
-#define F0900_SDEMOD_LOCK_2 0xf1220002
-#define F0900_SDEMOD_IRQ_2 0xf1220001
+#define R0900_IRQSTATUS1 0xf122
+#define F0900_SPKTDEL_LOCK_1 0xf1220080
+#define F0900_SDEMOD_LOCKB_2 0xf1220004
+#define F0900_SDEMOD_LOCK_2 0xf1220002
+#define F0900_SDEMOD_IRQ_2 0xf1220001
/*IRQSTATUS0*/
-#define R0900_IRQSTATUS0 0xf123
-#define F0900_SDEMOD_LOCKB_1 0xf1230080
-#define F0900_SDEMOD_LOCK_1 0xf1230040
-#define F0900_SDEMOD_IRQ_1 0xf1230020
-#define F0900_SBCH_ERRFLAG 0xf1230010
-#define F0900_SDISEQC2RX_IRQ 0xf1230008
-#define F0900_SDISEQC2TX_IRQ 0xf1230004
-#define F0900_SDISEQC1RX_IRQ 0xf1230002
-#define F0900_SDISEQC1TX_IRQ 0xf1230001
+#define R0900_IRQSTATUS0 0xf123
+#define F0900_SDEMOD_LOCKB_1 0xf1230080
+#define F0900_SDEMOD_LOCK_1 0xf1230040
+#define F0900_SDEMOD_IRQ_1 0xf1230020
+#define F0900_SBCH_ERRFLAG 0xf1230010
+#define F0900_SDISEQC2RX_IRQ 0xf1230008
+#define F0900_SDISEQC2TX_IRQ 0xf1230004
+#define F0900_SDISEQC1RX_IRQ 0xf1230002
+#define F0900_SDISEQC1TX_IRQ 0xf1230001
/*IRQMASK3*/
-#define R0900_IRQMASK3 0xf124
-#define F0900_MPLL_LOCK 0xf1240020
-#define F0900_MSTREAM_LCK_3 0xf1240010
-#define F0900_MSTREAM_LCK_2 0xf1240008
-#define F0900_MSTREAM_LCK_1 0xf1240004
-#define F0900_MDVBS1_PRF_2 0xf1240002
-#define F0900_MDVBS1_PRF_1 0xf1240001
+#define R0900_IRQMASK3 0xf124
+#define F0900_MPLL_LOCK 0xf1240020
+#define F0900_MSTREAM_LCK_3 0xf1240010
+#define F0900_MSTREAM_LCK_2 0xf1240008
+#define F0900_MSTREAM_LCK_1 0xf1240004
+#define F0900_MDVBS1_PRF_2 0xf1240002
+#define F0900_MDVBS1_PRF_1 0xf1240001
/*IRQMASK2*/
-#define R0900_IRQMASK2 0xf125
-#define F0900_MSPY_ENDSIM_3 0xf1250080
-#define F0900_MSPY_ENDSIM_2 0xf1250040
-#define F0900_MSPY_ENDSIM_1 0xf1250020
-#define F0900_MPKTDEL_ERROR_2 0xf1250010
-#define F0900_MPKTDEL_LOCKB_2 0xf1250008
-#define F0900_MPKTDEL_LOCK_2 0xf1250004
-#define F0900_MPKTDEL_ERROR_1 0xf1250002
-#define F0900_MPKTDEL_LOCKB_1 0xf1250001
+#define R0900_IRQMASK2 0xf125
+#define F0900_MSPY_ENDSIM_3 0xf1250080
+#define F0900_MSPY_ENDSIM_2 0xf1250040
+#define F0900_MSPY_ENDSIM_1 0xf1250020
+#define F0900_MPKTDEL_ERROR_2 0xf1250010
+#define F0900_MPKTDEL_LOCKB_2 0xf1250008
+#define F0900_MPKTDEL_LOCK_2 0xf1250004
+#define F0900_MPKTDEL_ERROR_1 0xf1250002
+#define F0900_MPKTDEL_LOCKB_1 0xf1250001
/*IRQMASK1*/
-#define R0900_IRQMASK1 0xf126
-#define F0900_MPKTDEL_LOCK_1 0xf1260080
-#define F0900_MEXTPINB2 0xf1260040
-#define F0900_MEXTPIN2 0xf1260020
-#define F0900_MEXTPINB1 0xf1260010
-#define F0900_MEXTPIN1 0xf1260008
-#define F0900_MDEMOD_LOCKB_2 0xf1260004
-#define F0900_MDEMOD_LOCK_2 0xf1260002
-#define F0900_MDEMOD_IRQ_2 0xf1260001
+#define R0900_IRQMASK1 0xf126
+#define F0900_MPKTDEL_LOCK_1 0xf1260080
+#define F0900_MEXTPINB2 0xf1260040
+#define F0900_MEXTPIN2 0xf1260020
+#define F0900_MEXTPINB1 0xf1260010
+#define F0900_MEXTPIN1 0xf1260008
+#define F0900_MDEMOD_LOCKB_2 0xf1260004
+#define F0900_MDEMOD_LOCK_2 0xf1260002
+#define F0900_MDEMOD_IRQ_2 0xf1260001
/*IRQMASK0*/
-#define R0900_IRQMASK0 0xf127
-#define F0900_MDEMOD_LOCKB_1 0xf1270080
-#define F0900_MDEMOD_LOCK_1 0xf1270040
-#define F0900_MDEMOD_IRQ_1 0xf1270020
-#define F0900_MBCH_ERRFLAG 0xf1270010
-#define F0900_MDISEQC2RX_IRQ 0xf1270008
-#define F0900_MDISEQC2TX_IRQ 0xf1270004
-#define F0900_MDISEQC1RX_IRQ 0xf1270002
-#define F0900_MDISEQC1TX_IRQ 0xf1270001
+#define R0900_IRQMASK0 0xf127
+#define F0900_MDEMOD_LOCKB_1 0xf1270080
+#define F0900_MDEMOD_LOCK_1 0xf1270040
+#define F0900_MDEMOD_IRQ_1 0xf1270020
+#define F0900_MBCH_ERRFLAG 0xf1270010
+#define F0900_MDISEQC2RX_IRQ 0xf1270008
+#define F0900_MDISEQC2TX_IRQ 0xf1270004
+#define F0900_MDISEQC1RX_IRQ 0xf1270002
+#define F0900_MDISEQC1TX_IRQ 0xf1270001
/*I2CCFG*/
-#define R0900_I2CCFG 0xf129
-#define F0900_I2C2_FASTMODE 0xf1290080
-#define F0900_STATUS_WR2 0xf1290040
-#define F0900_I2C2ADDR_INC 0xf1290030
-#define F0900_I2C_FASTMODE 0xf1290008
-#define F0900_STATUS_WR 0xf1290004
-#define F0900_I2CADDR_INC 0xf1290003
+#define R0900_I2CCFG 0xf129
+#define F0900_I2C_FASTMODE 0xf1290008
+#define F0900_I2CADDR_INC 0xf1290003
/*P1_I2CRPT*/
-#define R0900_P1_I2CRPT 0xf12a
-#define F0900_P1_I2CT_ON 0xf12a0080
-#define F0900_P1_ENARPT_LEVEL 0xf12a0070
-#define F0900_P1_SCLT_DELAY 0xf12a0008
-#define F0900_P1_STOP_ENABLE 0xf12a0004
-#define F0900_P1_STOP_SDAT2SDA 0xf12a0002
+#define R0900_P1_I2CRPT 0xf12a
+#define I2CRPT shiftx(R0900_P1_I2CRPT, demod, -1)
+#define F0900_P1_I2CT_ON 0xf12a0080
+#define I2CT_ON shiftx(F0900_P1_I2CT_ON, demod, -0x10000)
+#define F0900_P1_ENARPT_LEVEL 0xf12a0070
+#define F0900_P1_SCLT_DELAY 0xf12a0008
+#define F0900_P1_STOP_ENABLE 0xf12a0004
+#define F0900_P1_STOP_SDAT2SDA 0xf12a0002
/*P2_I2CRPT*/
-#define R0900_P2_I2CRPT 0xf12b
-#define F0900_P2_I2CT_ON 0xf12b0080
-#define F0900_P2_ENARPT_LEVEL 0xf12b0070
-#define F0900_P2_SCLT_DELAY 0xf12b0008
-#define F0900_P2_STOP_ENABLE 0xf12b0004
-#define F0900_P2_STOP_SDAT2SDA 0xf12b0002
+#define R0900_P2_I2CRPT 0xf12b
+#define F0900_P2_I2CT_ON 0xf12b0080
+#define F0900_P2_ENARPT_LEVEL 0xf12b0070
+#define F0900_P2_SCLT_DELAY 0xf12b0008
+#define F0900_P2_STOP_ENABLE 0xf12b0004
+#define F0900_P2_STOP_SDAT2SDA 0xf12b0002
+
+/*IOPVALUE6*/
+#define R0900_IOPVALUE6 0xf138
+#define F0900_VSCL 0xf1380004
+#define F0900_VSDA 0xf1380002
+#define F0900_VDATA3_0 0xf1380001
+
+/*IOPVALUE5*/
+#define R0900_IOPVALUE5 0xf139
+#define F0900_VDATA3_1 0xf1390080
+#define F0900_VDATA3_2 0xf1390040
+#define F0900_VDATA3_3 0xf1390020
+#define F0900_VDATA3_4 0xf1390010
+#define F0900_VDATA3_5 0xf1390008
+#define F0900_VDATA3_6 0xf1390004
+#define F0900_VDATA3_7 0xf1390002
+#define F0900_VCLKOUT3 0xf1390001
+
+/*IOPVALUE4*/
+#define R0900_IOPVALUE4 0xf13a
+#define F0900_VSTROUT3 0xf13a0080
+#define F0900_VDPN3 0xf13a0040
+#define F0900_VERROR3 0xf13a0020
+#define F0900_VDATA2_7 0xf13a0010
+#define F0900_VCLKOUT2 0xf13a0008
+#define F0900_VSTROUT2 0xf13a0004
+#define F0900_VDPN2 0xf13a0002
+#define F0900_VERROR2 0xf13a0001
+
+/*IOPVALUE3*/
+#define R0900_IOPVALUE3 0xf13b
+#define F0900_VDATA1_7 0xf13b0080
+#define F0900_VCLKOUT1 0xf13b0040
+#define F0900_VSTROUT1 0xf13b0020
+#define F0900_VDPN1 0xf13b0010
+#define F0900_VERROR1 0xf13b0008
+#define F0900_VCLKOUT27 0xf13b0004
+#define F0900_VDISEQCOUT2 0xf13b0002
+#define F0900_VSCLT2 0xf13b0001
+
+/*IOPVALUE2*/
+#define R0900_IOPVALUE2 0xf13c
+#define F0900_VSDAT2 0xf13c0080
+#define F0900_VAGCRF2 0xf13c0040
+#define F0900_VDISEQCOUT1 0xf13c0020
+#define F0900_VSCLT1 0xf13c0010
+#define F0900_VSDAT1 0xf13c0008
+#define F0900_VAGCRF1 0xf13c0004
+#define F0900_VDIRCLK 0xf13c0002
+#define F0900_VSTDBY 0xf13c0001
+
+/*IOPVALUE1*/
+#define R0900_IOPVALUE1 0xf13d
+#define F0900_VCS1 0xf13d0080
+#define F0900_VCS0 0xf13d0040
+#define F0900_VGPIO13 0xf13d0020
+#define F0900_VGPIO12 0xf13d0010
+#define F0900_VGPIO11 0xf13d0008
+#define F0900_VGPIO10 0xf13d0004
+#define F0900_VGPIO9 0xf13d0002
+#define F0900_VGPIO8 0xf13d0001
+
+/*IOPVALUE0*/
+#define R0900_IOPVALUE0 0xf13e
+#define F0900_VGPIO7 0xf13e0080
+#define F0900_VGPIO6 0xf13e0040
+#define F0900_VGPIO5 0xf13e0020
+#define F0900_VGPIO4 0xf13e0010
+#define F0900_VGPIO3 0xf13e0008
+#define F0900_VGPIO2 0xf13e0004
+#define F0900_VGPIO1 0xf13e0002
+#define F0900_VCLKI2 0xf13e0001
/*CLKI2CFG*/
-#define R0900_CLKI2CFG 0xf140
-#define F0900_CLKI2_OPD 0xf1400080
-#define F0900_CLKI2_CONFIG 0xf140007e
-#define F0900_CLKI2_XOR 0xf1400001
+#define R0900_CLKI2CFG 0xf140
+#define F0900_CLKI2_OPD 0xf1400080
+#define F0900_CLKI2_CONFIG 0xf140007e
+#define F0900_CLKI2_XOR 0xf1400001
/*GPIO1CFG*/
-#define R0900_GPIO1CFG 0xf141
-#define F0900_GPIO1_OPD 0xf1410080
-#define F0900_GPIO1_CONFIG 0xf141007e
-#define F0900_GPIO1_XOR 0xf1410001
+#define R0900_GPIO1CFG 0xf141
+#define F0900_GPIO1_OPD 0xf1410080
+#define F0900_GPIO1_CONFIG 0xf141007e
+#define F0900_GPIO1_XOR 0xf1410001
/*GPIO2CFG*/
-#define R0900_GPIO2CFG 0xf142
-#define F0900_GPIO2_OPD 0xf1420080
-#define F0900_GPIO2_CONFIG 0xf142007e
-#define F0900_GPIO2_XOR 0xf1420001
+#define R0900_GPIO2CFG 0xf142
+#define F0900_GPIO2_OPD 0xf1420080
+#define F0900_GPIO2_CONFIG 0xf142007e
+#define F0900_GPIO2_XOR 0xf1420001
/*GPIO3CFG*/
-#define R0900_GPIO3CFG 0xf143
-#define F0900_GPIO3_OPD 0xf1430080
-#define F0900_GPIO3_CONFIG 0xf143007e
-#define F0900_GPIO3_XOR 0xf1430001
+#define R0900_GPIO3CFG 0xf143
+#define F0900_GPIO3_OPD 0xf1430080
+#define F0900_GPIO3_CONFIG 0xf143007e
+#define F0900_GPIO3_XOR 0xf1430001
/*GPIO4CFG*/
-#define R0900_GPIO4CFG 0xf144
-#define F0900_GPIO4_OPD 0xf1440080
-#define F0900_GPIO4_CONFIG 0xf144007e
-#define F0900_GPIO4_XOR 0xf1440001
+#define R0900_GPIO4CFG 0xf144
+#define F0900_GPIO4_OPD 0xf1440080
+#define F0900_GPIO4_CONFIG 0xf144007e
+#define F0900_GPIO4_XOR 0xf1440001
/*GPIO5CFG*/
-#define R0900_GPIO5CFG 0xf145
-#define F0900_GPIO5_OPD 0xf1450080
-#define F0900_GPIO5_CONFIG 0xf145007e
-#define F0900_GPIO5_XOR 0xf1450001
+#define R0900_GPIO5CFG 0xf145
+#define F0900_GPIO5_OPD 0xf1450080
+#define F0900_GPIO5_CONFIG 0xf145007e
+#define F0900_GPIO5_XOR 0xf1450001
/*GPIO6CFG*/
-#define R0900_GPIO6CFG 0xf146
-#define F0900_GPIO6_OPD 0xf1460080
-#define F0900_GPIO6_CONFIG 0xf146007e
-#define F0900_GPIO6_XOR 0xf1460001
+#define R0900_GPIO6CFG 0xf146
+#define F0900_GPIO6_OPD 0xf1460080
+#define F0900_GPIO6_CONFIG 0xf146007e
+#define F0900_GPIO6_XOR 0xf1460001
/*GPIO7CFG*/
-#define R0900_GPIO7CFG 0xf147
-#define F0900_GPIO7_OPD 0xf1470080
-#define F0900_GPIO7_CONFIG 0xf147007e
-#define F0900_GPIO7_XOR 0xf1470001
+#define R0900_GPIO7CFG 0xf147
+#define F0900_GPIO7_OPD 0xf1470080
+#define F0900_GPIO7_CONFIG 0xf147007e
+#define F0900_GPIO7_XOR 0xf1470001
/*GPIO8CFG*/
-#define R0900_GPIO8CFG 0xf148
-#define F0900_GPIO8_OPD 0xf1480080
-#define F0900_GPIO8_CONFIG 0xf148007e
-#define F0900_GPIO8_XOR 0xf1480001
+#define R0900_GPIO8CFG 0xf148
+#define F0900_GPIO8_OPD 0xf1480080
+#define F0900_GPIO8_CONFIG 0xf148007e
+#define F0900_GPIO8_XOR 0xf1480001
/*GPIO9CFG*/
-#define R0900_GPIO9CFG 0xf149
-#define F0900_GPIO9_OPD 0xf1490080
-#define F0900_GPIO9_CONFIG 0xf149007e
-#define F0900_GPIO9_XOR 0xf1490001
+#define R0900_GPIO9CFG 0xf149
+#define F0900_GPIO9_OPD 0xf1490080
+#define F0900_GPIO9_CONFIG 0xf149007e
+#define F0900_GPIO9_XOR 0xf1490001
/*GPIO10CFG*/
-#define R0900_GPIO10CFG 0xf14a
-#define F0900_GPIO10_OPD 0xf14a0080
-#define F0900_GPIO10_CONFIG 0xf14a007e
-#define F0900_GPIO10_XOR 0xf14a0001
+#define R0900_GPIO10CFG 0xf14a
+#define F0900_GPIO10_OPD 0xf14a0080
+#define F0900_GPIO10_CONFIG 0xf14a007e
+#define F0900_GPIO10_XOR 0xf14a0001
/*GPIO11CFG*/
-#define R0900_GPIO11CFG 0xf14b
-#define F0900_GPIO11_OPD 0xf14b0080
-#define F0900_GPIO11_CONFIG 0xf14b007e
-#define F0900_GPIO11_XOR 0xf14b0001
+#define R0900_GPIO11CFG 0xf14b
+#define F0900_GPIO11_OPD 0xf14b0080
+#define F0900_GPIO11_CONFIG 0xf14b007e
+#define F0900_GPIO11_XOR 0xf14b0001
/*GPIO12CFG*/
-#define R0900_GPIO12CFG 0xf14c
-#define F0900_GPIO12_OPD 0xf14c0080
-#define F0900_GPIO12_CONFIG 0xf14c007e
-#define F0900_GPIO12_XOR 0xf14c0001
+#define R0900_GPIO12CFG 0xf14c
+#define F0900_GPIO12_OPD 0xf14c0080
+#define F0900_GPIO12_CONFIG 0xf14c007e
+#define F0900_GPIO12_XOR 0xf14c0001
/*GPIO13CFG*/
-#define R0900_GPIO13CFG 0xf14d
-#define F0900_GPIO13_OPD 0xf14d0080
-#define F0900_GPIO13_CONFIG 0xf14d007e
-#define F0900_GPIO13_XOR 0xf14d0001
+#define R0900_GPIO13CFG 0xf14d
+#define F0900_GPIO13_OPD 0xf14d0080
+#define F0900_GPIO13_CONFIG 0xf14d007e
+#define F0900_GPIO13_XOR 0xf14d0001
/*CS0CFG*/
-#define R0900_CS0CFG 0xf14e
-#define F0900_CS0_OPD 0xf14e0080
-#define F0900_CS0_CONFIG 0xf14e007e
-#define F0900_CS0_XOR 0xf14e0001
+#define R0900_CS0CFG 0xf14e
+#define F0900_CS0_OPD 0xf14e0080
+#define F0900_CS0_CONFIG 0xf14e007e
+#define F0900_CS0_XOR 0xf14e0001
/*CS1CFG*/
-#define R0900_CS1CFG 0xf14f
-#define F0900_CS1_OPD 0xf14f0080
-#define F0900_CS1_CONFIG 0xf14f007e
-#define F0900_CS1_XOR 0xf14f0001
+#define R0900_CS1CFG 0xf14f
+#define F0900_CS1_OPD 0xf14f0080
+#define F0900_CS1_CONFIG 0xf14f007e
+#define F0900_CS1_XOR 0xf14f0001
/*STDBYCFG*/
-#define R0900_STDBYCFG 0xf150
-#define F0900_STDBY_OPD 0xf1500080
-#define F0900_STDBY_CONFIG 0xf150007e
-#define F0900_STBDY_XOR 0xf1500001
+#define R0900_STDBYCFG 0xf150
+#define F0900_STDBY_OPD 0xf1500080
+#define F0900_STDBY_CONFIG 0xf150007e
+#define F0900_STBDY_XOR 0xf1500001
/*DIRCLKCFG*/
-#define R0900_DIRCLKCFG 0xf151
-#define F0900_DIRCLK_OPD 0xf1510080
-#define F0900_DIRCLK_CONFIG 0xf151007e
-#define F0900_DIRCLK_XOR 0xf1510001
+#define R0900_DIRCLKCFG 0xf151
+#define F0900_DIRCLK_OPD 0xf1510080
+#define F0900_DIRCLK_CONFIG 0xf151007e
+#define F0900_DIRCLK_XOR 0xf1510001
/*AGCRF1CFG*/
-#define R0900_AGCRF1CFG 0xf152
-#define F0900_AGCRF1_OPD 0xf1520080
-#define F0900_AGCRF1_CONFIG 0xf152007e
-#define F0900_AGCRF1_XOR 0xf1520001
+#define R0900_AGCRF1CFG 0xf152
+#define F0900_AGCRF1_OPD 0xf1520080
+#define F0900_AGCRF1_CONFIG 0xf152007e
+#define F0900_AGCRF1_XOR 0xf1520001
/*SDAT1CFG*/
-#define R0900_SDAT1CFG 0xf153
-#define F0900_SDAT1_OPD 0xf1530080
-#define F0900_SDAT1_CONFIG 0xf153007e
-#define F0900_SDAT1_XOR 0xf1530001
+#define R0900_SDAT1CFG 0xf153
+#define F0900_SDAT1_OPD 0xf1530080
+#define F0900_SDAT1_CONFIG 0xf153007e
+#define F0900_SDAT1_XOR 0xf1530001
/*SCLT1CFG*/
-#define R0900_SCLT1CFG 0xf154
-#define F0900_SCLT1_OPD 0xf1540080
-#define F0900_SCLT1_CONFIG 0xf154007e
-#define F0900_SCLT1_XOR 0xf1540001
+#define R0900_SCLT1CFG 0xf154
+#define F0900_SCLT1_OPD 0xf1540080
+#define F0900_SCLT1_CONFIG 0xf154007e
+#define F0900_SCLT1_XOR 0xf1540001
/*DISEQCO1CFG*/
-#define R0900_DISEQCO1CFG 0xf155
-#define F0900_DISEQCO1_OPD 0xf1550080
-#define F0900_DISEQCO1_CONFIG 0xf155007e
-#define F0900_DISEQC1_XOR 0xf1550001
+#define R0900_DISEQCO1CFG 0xf155
+#define F0900_DISEQCO1_OPD 0xf1550080
+#define F0900_DISEQCO1_CONFIG 0xf155007e
+#define F0900_DISEQC1_XOR 0xf1550001
/*AGCRF2CFG*/
-#define R0900_AGCRF2CFG 0xf156
-#define F0900_AGCRF2_OPD 0xf1560080
-#define F0900_AGCRF2_CONFIG 0xf156007e
-#define F0900_AGCRF2_XOR 0xf1560001
+#define R0900_AGCRF2CFG 0xf156
+#define F0900_AGCRF2_OPD 0xf1560080
+#define F0900_AGCRF2_CONFIG 0xf156007e
+#define F0900_AGCRF2_XOR 0xf1560001
/*SDAT2CFG*/
-#define R0900_SDAT2CFG 0xf157
-#define F0900_SDAT2_OPD 0xf1570080
-#define F0900_SDAT2_CONFIG 0xf157007e
-#define F0900_SDAT2_XOR 0xf1570001
+#define R0900_SDAT2CFG 0xf157
+#define F0900_SDAT2_OPD 0xf1570080
+#define F0900_SDAT2_CONFIG 0xf157007e
+#define F0900_SDAT2_XOR 0xf1570001
/*SCLT2CFG*/
-#define R0900_SCLT2CFG 0xf158
-#define F0900_SCLT2_OPD 0xf1580080
-#define F0900_SCLT2_CONFIG 0xf158007e
-#define F0900_SCLT2_XOR 0xf1580001
+#define R0900_SCLT2CFG 0xf158
+#define F0900_SCLT2_OPD 0xf1580080
+#define F0900_SCLT2_CONFIG 0xf158007e
+#define F0900_SCLT2_XOR 0xf1580001
/*DISEQCO2CFG*/
-#define R0900_DISEQCO2CFG 0xf159
-#define F0900_DISEQCO2_OPD 0xf1590080
-#define F0900_DISEQCO2_CONFIG 0xf159007e
-#define F0900_DISEQC2_XOR 0xf1590001
+#define R0900_DISEQCO2CFG 0xf159
+#define F0900_DISEQCO2_OPD 0xf1590080
+#define F0900_DISEQCO2_CONFIG 0xf159007e
+#define F0900_DISEQC2_XOR 0xf1590001
/*CLKOUT27CFG*/
-#define R0900_CLKOUT27CFG 0xf15a
-#define F0900_CLKOUT27_OPD 0xf15a0080
-#define F0900_CLKOUT27_CONFIG 0xf15a007e
-#define F0900_CLKOUT27_XOR 0xf15a0001
+#define R0900_CLKOUT27CFG 0xf15a
+#define F0900_CLKOUT27_OPD 0xf15a0080
+#define F0900_CLKOUT27_CONFIG 0xf15a007e
+#define F0900_CLKOUT27_XOR 0xf15a0001
/*ERROR1CFG*/
-#define R0900_ERROR1CFG 0xf15b
-#define F0900_ERROR1_OPD 0xf15b0080
-#define F0900_ERROR1_CONFIG 0xf15b007e
-#define F0900_ERROR1_XOR 0xf15b0001
+#define R0900_ERROR1CFG 0xf15b
+#define F0900_ERROR1_OPD 0xf15b0080
+#define F0900_ERROR1_CONFIG 0xf15b007e
+#define F0900_ERROR1_XOR 0xf15b0001
/*DPN1CFG*/
-#define R0900_DPN1CFG 0xf15c
-#define F0900_DPN1_OPD 0xf15c0080
-#define F0900_DPN1_CONFIG 0xf15c007e
-#define F0900_DPN1_XOR 0xf15c0001
+#define R0900_DPN1CFG 0xf15c
+#define F0900_DPN1_OPD 0xf15c0080
+#define F0900_DPN1_CONFIG 0xf15c007e
+#define F0900_DPN1_XOR 0xf15c0001
/*STROUT1CFG*/
-#define R0900_STROUT1CFG 0xf15d
-#define F0900_STROUT1_OPD 0xf15d0080
-#define F0900_STROUT1_CONFIG 0xf15d007e
-#define F0900_STROUT1_XOR 0xf15d0001
+#define R0900_STROUT1CFG 0xf15d
+#define F0900_STROUT1_OPD 0xf15d0080
+#define F0900_STROUT1_CONFIG 0xf15d007e
+#define F0900_STROUT1_XOR 0xf15d0001
/*CLKOUT1CFG*/
-#define R0900_CLKOUT1CFG 0xf15e
-#define F0900_CLKOUT1_OPD 0xf15e0080
-#define F0900_CLKOUT1_CONFIG 0xf15e007e
-#define F0900_CLKOUT1_XOR 0xf15e0001
+#define R0900_CLKOUT1CFG 0xf15e
+#define F0900_CLKOUT1_OPD 0xf15e0080
+#define F0900_CLKOUT1_CONFIG 0xf15e007e
+#define F0900_CLKOUT1_XOR 0xf15e0001
/*DATA71CFG*/
-#define R0900_DATA71CFG 0xf15f
-#define F0900_DATA71_OPD 0xf15f0080
-#define F0900_DATA71_CONFIG 0xf15f007e
-#define F0900_DATA71_XOR 0xf15f0001
+#define R0900_DATA71CFG 0xf15f
+#define F0900_DATA71_OPD 0xf15f0080
+#define F0900_DATA71_CONFIG 0xf15f007e
+#define F0900_DATA71_XOR 0xf15f0001
/*ERROR2CFG*/
-#define R0900_ERROR2CFG 0xf160
-#define F0900_ERROR2_OPD 0xf1600080
-#define F0900_ERROR2_CONFIG 0xf160007e
-#define F0900_ERROR2_XOR 0xf1600001
+#define R0900_ERROR2CFG 0xf160
+#define F0900_ERROR2_OPD 0xf1600080
+#define F0900_ERROR2_CONFIG 0xf160007e
+#define F0900_ERROR2_XOR 0xf1600001
/*DPN2CFG*/
-#define R0900_DPN2CFG 0xf161
-#define F0900_DPN2_OPD 0xf1610080
-#define F0900_DPN2_CONFIG 0xf161007e
-#define F0900_DPN2_XOR 0xf1610001
+#define R0900_DPN2CFG 0xf161
+#define F0900_DPN2_OPD 0xf1610080
+#define F0900_DPN2_CONFIG 0xf161007e
+#define F0900_DPN2_XOR 0xf1610001
/*STROUT2CFG*/
-#define R0900_STROUT2CFG 0xf162
-#define F0900_STROUT2_OPD 0xf1620080
-#define F0900_STROUT2_CONFIG 0xf162007e
-#define F0900_STROUT2_XOR 0xf1620001
+#define R0900_STROUT2CFG 0xf162
+#define F0900_STROUT2_OPD 0xf1620080
+#define F0900_STROUT2_CONFIG 0xf162007e
+#define F0900_STROUT2_XOR 0xf1620001
/*CLKOUT2CFG*/
-#define R0900_CLKOUT2CFG 0xf163
-#define F0900_CLKOUT2_OPD 0xf1630080
-#define F0900_CLKOUT2_CONFIG 0xf163007e
-#define F0900_CLKOUT2_XOR 0xf1630001
+#define R0900_CLKOUT2CFG 0xf163
+#define F0900_CLKOUT2_OPD 0xf1630080
+#define F0900_CLKOUT2_CONFIG 0xf163007e
+#define F0900_CLKOUT2_XOR 0xf1630001
/*DATA72CFG*/
-#define R0900_DATA72CFG 0xf164
-#define F0900_DATA72_OPD 0xf1640080
-#define F0900_DATA72_CONFIG 0xf164007e
-#define F0900_DATA72_XOR 0xf1640001
+#define R0900_DATA72CFG 0xf164
+#define F0900_DATA72_OPD 0xf1640080
+#define F0900_DATA72_CONFIG 0xf164007e
+#define F0900_DATA72_XOR 0xf1640001
/*ERROR3CFG*/
-#define R0900_ERROR3CFG 0xf165
-#define F0900_ERROR3_OPD 0xf1650080
-#define F0900_ERROR3_CONFIG 0xf165007e
-#define F0900_ERROR3_XOR 0xf1650001
+#define R0900_ERROR3CFG 0xf165
+#define F0900_ERROR3_OPD 0xf1650080
+#define F0900_ERROR3_CONFIG 0xf165007e
+#define F0900_ERROR3_XOR 0xf1650001
/*DPN3CFG*/
-#define R0900_DPN3CFG 0xf166
-#define F0900_DPN3_OPD 0xf1660080
-#define F0900_DPN3_CONFIG 0xf166007e
-#define F0900_DPN3_XOR 0xf1660001
+#define R0900_DPN3CFG 0xf166
+#define F0900_DPN3_OPD 0xf1660080
+#define F0900_DPN3_CONFIG 0xf166007e
+#define F0900_DPN3_XOR 0xf1660001
/*STROUT3CFG*/
-#define R0900_STROUT3CFG 0xf167
-#define F0900_STROUT3_OPD 0xf1670080
-#define F0900_STROUT3_CONFIG 0xf167007e
-#define F0900_STROUT3_XOR 0xf1670001
+#define R0900_STROUT3CFG 0xf167
+#define F0900_STROUT3_OPD 0xf1670080
+#define F0900_STROUT3_CONFIG 0xf167007e
+#define F0900_STROUT3_XOR 0xf1670001
/*CLKOUT3CFG*/
-#define R0900_CLKOUT3CFG 0xf168
-#define F0900_CLKOUT3_OPD 0xf1680080
-#define F0900_CLKOUT3_CONFIG 0xf168007e
-#define F0900_CLKOUT3_XOR 0xf1680001
+#define R0900_CLKOUT3CFG 0xf168
+#define F0900_CLKOUT3_OPD 0xf1680080
+#define F0900_CLKOUT3_CONFIG 0xf168007e
+#define F0900_CLKOUT3_XOR 0xf1680001
/*DATA73CFG*/
-#define R0900_DATA73CFG 0xf169
-#define F0900_DATA73_OPD 0xf1690080
-#define F0900_DATA73_CONFIG 0xf169007e
-#define F0900_DATA73_XOR 0xf1690001
+#define R0900_DATA73CFG 0xf169
+#define F0900_DATA73_OPD 0xf1690080
+#define F0900_DATA73_CONFIG 0xf169007e
+#define F0900_DATA73_XOR 0xf1690001
+
+/*STRSTATUS1*/
+#define R0900_STRSTATUS1 0xf16a
+#define F0900_STRSTATUS_SEL2 0xf16a00f0
+#define F0900_STRSTATUS_SEL1 0xf16a000f
+
+/*STRSTATUS2*/
+#define R0900_STRSTATUS2 0xf16b
+#define F0900_STRSTATUS_SEL4 0xf16b00f0
+#define F0900_STRSTATUS_SEL3 0xf16b000f
+
+/*STRSTATUS3*/
+#define R0900_STRSTATUS3 0xf16c
+#define F0900_STRSTATUS_SEL6 0xf16c00f0
+#define F0900_STRSTATUS_SEL5 0xf16c000f
/*FSKTFC2*/
-#define R0900_FSKTFC2 0xf170
-#define F0900_FSKT_KMOD 0xf17000fc
-#define F0900_FSKT_CAR2 0xf1700003
+#define R0900_FSKTFC2 0xf170
+#define F0900_FSKT_KMOD 0xf17000fc
+#define F0900_FSKT_CAR2 0xf1700003
/*FSKTFC1*/
-#define R0900_FSKTFC1 0xf171
-#define F0900_FSKT_CAR1 0xf17100ff
+#define R0900_FSKTFC1 0xf171
+#define F0900_FSKT_CAR1 0xf17100ff
/*FSKTFC0*/
-#define R0900_FSKTFC0 0xf172
-#define F0900_FSKT_CAR0 0xf17200ff
+#define R0900_FSKTFC0 0xf172
+#define F0900_FSKT_CAR0 0xf17200ff
/*FSKTDELTAF1*/
-#define R0900_FSKTDELTAF1 0xf173
-#define F0900_FSKT_DELTAF1 0xf173000f
+#define R0900_FSKTDELTAF1 0xf173
+#define F0900_FSKT_DELTAF1 0xf173000f
/*FSKTDELTAF0*/
-#define R0900_FSKTDELTAF0 0xf174
-#define F0900_FSKT_DELTAF0 0xf17400ff
+#define R0900_FSKTDELTAF0 0xf174
+#define F0900_FSKT_DELTAF0 0xf17400ff
/*FSKTCTRL*/
-#define R0900_FSKTCTRL 0xf175
-#define F0900_FSKT_EN_SGN 0xf1750040
-#define F0900_FSKT_MOD_SGN 0xf1750020
-#define F0900_FSKT_MOD_EN 0xf175001c
-#define F0900_FSKT_DACMODE 0xf1750003
+#define R0900_FSKTCTRL 0xf175
+#define F0900_FSKT_EN_SGN 0xf1750040
+#define F0900_FSKT_MOD_SGN 0xf1750020
+#define F0900_FSKT_MOD_EN 0xf175001c
+#define F0900_FSKT_DACMODE 0xf1750003
/*FSKRFC2*/
-#define R0900_FSKRFC2 0xf176
-#define F0900_FSKR_DETSGN 0xf1760040
-#define F0900_FSKR_OUTSGN 0xf1760020
-#define F0900_FSKR_KAGC 0xf176001c
-#define F0900_FSKR_CAR2 0xf1760003
+#define R0900_FSKRFC2 0xf176
+#define F0900_FSKR_DETSGN 0xf1760040
+#define F0900_FSKR_OUTSGN 0xf1760020
+#define F0900_FSKR_KAGC 0xf176001c
+#define F0900_FSKR_CAR2 0xf1760003
/*FSKRFC1*/
-#define R0900_FSKRFC1 0xf177
-#define F0900_FSKR_CAR1 0xf17700ff
+#define R0900_FSKRFC1 0xf177
+#define F0900_FSKR_CAR1 0xf17700ff
/*FSKRFC0*/
-#define R0900_FSKRFC0 0xf178
-#define F0900_FSKR_CAR0 0xf17800ff
+#define R0900_FSKRFC0 0xf178
+#define F0900_FSKR_CAR0 0xf17800ff
/*FSKRK1*/
-#define R0900_FSKRK1 0xf179
-#define F0900_FSKR_K1_EXP 0xf17900e0
-#define F0900_FSKR_K1_MANT 0xf179001f
+#define R0900_FSKRK1 0xf179
+#define F0900_FSKR_K1_EXP 0xf17900e0
+#define F0900_FSKR_K1_MANT 0xf179001f
/*FSKRK2*/
-#define R0900_FSKRK2 0xf17a
-#define F0900_FSKR_K2_EXP 0xf17a00e0
-#define F0900_FSKR_K2_MANT 0xf17a001f
+#define R0900_FSKRK2 0xf17a
+#define F0900_FSKR_K2_EXP 0xf17a00e0
+#define F0900_FSKR_K2_MANT 0xf17a001f
/*FSKRAGCR*/
-#define R0900_FSKRAGCR 0xf17b
-#define F0900_FSKR_OUTCTL 0xf17b00c0
-#define F0900_FSKR_AGC_REF 0xf17b003f
+#define R0900_FSKRAGCR 0xf17b
+#define F0900_FSKR_OUTCTL 0xf17b00c0
+#define F0900_FSKR_AGC_REF 0xf17b003f
/*FSKRAGC*/
-#define R0900_FSKRAGC 0xf17c
-#define F0900_FSKR_AGC_ACCU 0xf17c00ff
+#define R0900_FSKRAGC 0xf17c
+#define F0900_FSKR_AGC_ACCU 0xf17c00ff
/*FSKRALPHA*/
-#define R0900_FSKRALPHA 0xf17d
-#define F0900_FSKR_ALPHA_EXP 0xf17d001c
-#define F0900_FSKR_ALPHA_M 0xf17d0003
+#define R0900_FSKRALPHA 0xf17d
+#define F0900_FSKR_ALPHA_EXP 0xf17d001c
+#define F0900_FSKR_ALPHA_M 0xf17d0003
/*FSKRPLTH1*/
-#define R0900_FSKRPLTH1 0xf17e
-#define F0900_FSKR_BETA 0xf17e00f0
-#define F0900_FSKR_PLL_TRESH1 0xf17e000f
+#define R0900_FSKRPLTH1 0xf17e
+#define F0900_FSKR_BETA 0xf17e00f0
+#define F0900_FSKR_PLL_TRESH1 0xf17e000f
/*FSKRPLTH0*/
-#define R0900_FSKRPLTH0 0xf17f
-#define F0900_FSKR_PLL_TRESH0 0xf17f00ff
+#define R0900_FSKRPLTH0 0xf17f
+#define F0900_FSKR_PLL_TRESH0 0xf17f00ff
/*FSKRDF1*/
-#define R0900_FSKRDF1 0xf180
-#define F0900_FSKR_OUT 0xf1800080
-#define F0900_FSKR_DELTAF1 0xf180001f
+#define R0900_FSKRDF1 0xf180
+#define F0900_FSKR_OUT 0xf1800080
+#define F0900_FSKR_DELTAF1 0xf180001f
/*FSKRDF0*/
-#define R0900_FSKRDF0 0xf181
-#define F0900_FSKR_DELTAF0 0xf18100ff
+#define R0900_FSKRDF0 0xf181
+#define F0900_FSKR_DELTAF0 0xf18100ff
/*FSKRSTEPP*/
-#define R0900_FSKRSTEPP 0xf182
-#define F0900_FSKR_STEP_PLUS 0xf18200ff
+#define R0900_FSKRSTEPP 0xf182
+#define F0900_FSKR_STEP_PLUS 0xf18200ff
/*FSKRSTEPM*/
-#define R0900_FSKRSTEPM 0xf183
-#define F0900_FSKR_STEP_MINUS 0xf18300ff
+#define R0900_FSKRSTEPM 0xf183
+#define F0900_FSKR_STEP_MINUS 0xf18300ff
/*FSKRDET1*/
-#define R0900_FSKRDET1 0xf184
-#define F0900_FSKR_DETECT 0xf1840080
-#define F0900_FSKR_CARDET_ACCU1 0xf184000f
+#define R0900_FSKRDET1 0xf184
+#define F0900_FSKR_DETECT 0xf1840080
+#define F0900_FSKR_CARDET_ACCU1 0xf184000f
/*FSKRDET0*/
-#define R0900_FSKRDET0 0xf185
-#define F0900_FSKR_CARDET_ACCU0 0xf18500ff
+#define R0900_FSKRDET0 0xf185
+#define F0900_FSKR_CARDET_ACCU0 0xf18500ff
/*FSKRDTH1*/
-#define R0900_FSKRDTH1 0xf186
-#define F0900_FSKR_CARLOSS_THRESH1 0xf18600f0
-#define F0900_FSKR_CARDET_THRESH1 0xf186000f
+#define R0900_FSKRDTH1 0xf186
+#define F0900_FSKR_CARLOSS_THRESH1 0xf18600f0
+#define F0900_FSKR_CARDET_THRESH1 0xf186000f
/*FSKRDTH0*/
-#define R0900_FSKRDTH0 0xf187
-#define F0900_FSKR_CARDET_THRESH0 0xf18700ff
+#define R0900_FSKRDTH0 0xf187
+#define F0900_FSKR_CARDET_THRESH0 0xf18700ff
/*FSKRLOSS*/
-#define R0900_FSKRLOSS 0xf188
-#define F0900_FSKR_CARLOSS_THRESH0 0xf18800ff
+#define R0900_FSKRLOSS 0xf188
+#define F0900_FSKR_CARLOSS_THRESH0 0xf18800ff
/*P2_DISTXCTL*/
-#define R0900_P2_DISTXCTL 0xf190
-#define F0900_P2_TIM_OFF 0xf1900080
-#define F0900_P2_DISEQC_RESET 0xf1900040
-#define F0900_P2_TIM_CMD 0xf1900030
-#define F0900_P2_DIS_PRECHARGE 0xf1900008
-#define F0900_P2_DISTX_MODE 0xf1900007
+#define R0900_P2_DISTXCTL 0xf190
+#define F0900_P2_TIM_OFF 0xf1900080
+#define F0900_P2_DISEQC_RESET 0xf1900040
+#define F0900_P2_TIM_CMD 0xf1900030
+#define F0900_P2_DIS_PRECHARGE 0xf1900008
+#define F0900_P2_DISTX_MODE 0xf1900007
/*P2_DISRXCTL*/
-#define R0900_P2_DISRXCTL 0xf191
-#define F0900_P2_RECEIVER_ON 0xf1910080
-#define F0900_P2_IGNO_SHORT22K 0xf1910040
-#define F0900_P2_ONECHIP_TRX 0xf1910020
-#define F0900_P2_EXT_ENVELOP 0xf1910010
-#define F0900_P2_PIN_SELECT 0xf191000c
-#define F0900_P2_IRQ_RXEND 0xf1910002
-#define F0900_P2_IRQ_4NBYTES 0xf1910001
+#define R0900_P2_DISRXCTL 0xf191
+#define F0900_P2_RECEIVER_ON 0xf1910080
+#define F0900_P2_IGNO_SHORT22K 0xf1910040
+#define F0900_P2_ONECHIP_TRX 0xf1910020
+#define F0900_P2_EXT_ENVELOP 0xf1910010
+#define F0900_P2_PIN_SELECT0 0xf191000c
+#define F0900_P2_IRQ_RXEND 0xf1910002
+#define F0900_P2_IRQ_4NBYTES 0xf1910001
/*P2_DISRX_ST0*/
-#define R0900_P2_DISRX_ST0 0xf194
-#define F0900_P2_RX_END 0xf1940080
-#define F0900_P2_RX_ACTIVE 0xf1940040
-#define F0900_P2_SHORT_22KHZ 0xf1940020
-#define F0900_P2_CONT_TONE 0xf1940010
-#define F0900_P2_FIFO_4BREADY 0xf1940008
-#define F0900_P2_FIFO_EMPTY 0xf1940004
-#define F0900_P2_ABORT_DISRX 0xf1940001
+#define R0900_P2_DISRX_ST0 0xf194
+#define F0900_P2_RX_END 0xf1940080
+#define F0900_P2_RX_ACTIVE 0xf1940040
+#define F0900_P2_SHORT_22KHZ 0xf1940020
+#define F0900_P2_CONT_TONE 0xf1940010
+#define F0900_P2_FIFO_4BREADY 0xf1940008
+#define F0900_P2_FIFO_EMPTY 0xf1940004
+#define F0900_P2_ABORT_DISRX 0xf1940001
/*P2_DISRX_ST1*/
-#define R0900_P2_DISRX_ST1 0xf195
-#define F0900_P2_RX_FAIL 0xf1950080
-#define F0900_P2_FIFO_PARITYFAIL 0xf1950040
-#define F0900_P2_RX_NONBYTE 0xf1950020
-#define F0900_P2_FIFO_OVERFLOW 0xf1950010
-#define F0900_P2_FIFO_BYTENBR 0xf195000f
+#define R0900_P2_DISRX_ST1 0xf195
+#define F0900_P2_RX_FAIL 0xf1950080
+#define F0900_P2_FIFO_PARITYFAIL 0xf1950040
+#define F0900_P2_RX_NONBYTE 0xf1950020
+#define F0900_P2_FIFO_OVERFLOW 0xf1950010
+#define F0900_P2_FIFO_BYTENBR 0xf195000f
/*P2_DISRXDATA*/
-#define R0900_P2_DISRXDATA 0xf196
-#define F0900_P2_DISRX_DATA 0xf19600ff
+#define R0900_P2_DISRXDATA 0xf196
+#define F0900_P2_DISRX_DATA 0xf19600ff
/*P2_DISTXDATA*/
-#define R0900_P2_DISTXDATA 0xf197
-#define F0900_P2_DISEQC_FIFO 0xf19700ff
+#define R0900_P2_DISTXDATA 0xf197
+#define F0900_P2_DISEQC_FIFO 0xf19700ff
/*P2_DISTXSTATUS*/
-#define R0900_P2_DISTXSTATUS 0xf198
-#define F0900_P2_TX_FAIL 0xf1980080
-#define F0900_P2_FIFO_FULL 0xf1980040
-#define F0900_P2_TX_IDLE 0xf1980020
-#define F0900_P2_GAP_BURST 0xf1980010
-#define F0900_P2_TXFIFO_BYTES 0xf198000f
+#define R0900_P2_DISTXSTATUS 0xf198
+#define F0900_P2_TX_FAIL 0xf1980080
+#define F0900_P2_FIFO_FULL 0xf1980040
+#define F0900_P2_TX_IDLE 0xf1980020
+#define F0900_P2_GAP_BURST 0xf1980010
+#define F0900_P2_TXFIFO_BYTES 0xf198000f
/*P2_F22TX*/
-#define R0900_P2_F22TX 0xf199
-#define F0900_P2_F22_REG 0xf19900ff
+#define R0900_P2_F22TX 0xf199
+#define F0900_P2_F22_REG 0xf19900ff
/*P2_F22RX*/
-#define R0900_P2_F22RX 0xf19a
-#define F0900_P2_F22RX_REG 0xf19a00ff
+#define R0900_P2_F22RX 0xf19a
+#define F0900_P2_F22RX_REG 0xf19a00ff
/*P2_ACRPRESC*/
-#define R0900_P2_ACRPRESC 0xf19c
-#define F0900_P2_ACR_CODFRDY 0xf19c0008
-#define F0900_P2_ACR_PRESC 0xf19c0007
+#define R0900_P2_ACRPRESC 0xf19c
+#define F0900_P2_ACR_PRESC 0xf19c0007
/*P2_ACRDIV*/
-#define R0900_P2_ACRDIV 0xf19d
-#define F0900_P2_ACR_DIV 0xf19d00ff
+#define R0900_P2_ACRDIV 0xf19d
+#define F0900_P2_ACR_DIV 0xf19d00ff
/*P1_DISTXCTL*/
-#define R0900_P1_DISTXCTL 0xf1a0
-#define F0900_P1_TIM_OFF 0xf1a00080
-#define F0900_P1_DISEQC_RESET 0xf1a00040
-#define F0900_P1_TIM_CMD 0xf1a00030
-#define F0900_P1_DIS_PRECHARGE 0xf1a00008
-#define F0900_P1_DISTX_MODE 0xf1a00007
+#define R0900_P1_DISTXCTL 0xf1a0
+#define DISTXCTL shiftx(R0900_P1_DISTXCTL, demod, 0x10)
+#define F0900_P1_TIM_OFF 0xf1a00080
+#define F0900_P1_DISEQC_RESET 0xf1a00040
+#define DISEQC_RESET shiftx(F0900_P1_DISEQC_RESET, demod, 0x100000)
+#define F0900_P1_TIM_CMD 0xf1a00030
+#define F0900_P1_DIS_PRECHARGE 0xf1a00008
+#define DIS_PRECHARGE shiftx(F0900_P1_DIS_PRECHARGE, demod, 0x100000)
+#define F0900_P1_DISTX_MODE 0xf1a00007
+#define DISTX_MODE shiftx(F0900_P1_DISTX_MODE, demod, 0x100000)
/*P1_DISRXCTL*/
-#define R0900_P1_DISRXCTL 0xf1a1
-#define F0900_P1_RECEIVER_ON 0xf1a10080
-#define F0900_P1_IGNO_SHORT22K 0xf1a10040
-#define F0900_P1_ONECHIP_TRX 0xf1a10020
-#define F0900_P1_EXT_ENVELOP 0xf1a10010
-#define F0900_P1_PIN_SELECT 0xf1a1000c
-#define F0900_P1_IRQ_RXEND 0xf1a10002
-#define F0900_P1_IRQ_4NBYTES 0xf1a10001
+#define R0900_P1_DISRXCTL 0xf1a1
+#define DISRXCTL shiftx(R0900_P1_DISRXCTL, demod, 0x10)
+#define F0900_P1_RECEIVER_ON 0xf1a10080
+#define F0900_P1_IGNO_SHORT22K 0xf1a10040
+#define F0900_P1_ONECHIP_TRX 0xf1a10020
+#define F0900_P1_EXT_ENVELOP 0xf1a10010
+#define F0900_P1_PIN_SELECT0 0xf1a1000c
+#define F0900_P1_IRQ_RXEND 0xf1a10002
+#define F0900_P1_IRQ_4NBYTES 0xf1a10001
/*P1_DISRX_ST0*/
-#define R0900_P1_DISRX_ST0 0xf1a4
-#define F0900_P1_RX_END 0xf1a40080
-#define F0900_P1_RX_ACTIVE 0xf1a40040
-#define F0900_P1_SHORT_22KHZ 0xf1a40020
-#define F0900_P1_CONT_TONE 0xf1a40010
-#define F0900_P1_FIFO_4BREADY 0xf1a40008
-#define F0900_P1_FIFO_EMPTY 0xf1a40004
-#define F0900_P1_ABORT_DISRX 0xf1a40001
+#define R0900_P1_DISRX_ST0 0xf1a4
+#define DISRX_ST0 shiftx(R0900_P1_DISRX_ST0, demod, 0x10)
+#define F0900_P1_RX_END 0xf1a40080
+#define RX_END shiftx(F0900_P1_RX_END, demod, 0x100000)
+#define F0900_P1_RX_ACTIVE 0xf1a40040
+#define F0900_P1_SHORT_22KHZ 0xf1a40020
+#define F0900_P1_CONT_TONE 0xf1a40010
+#define F0900_P1_FIFO_4BREADY 0xf1a40008
+#define F0900_P1_FIFO_EMPTY 0xf1a40004
+#define F0900_P1_ABORT_DISRX 0xf1a40001
/*P1_DISRX_ST1*/
-#define R0900_P1_DISRX_ST1 0xf1a5
-#define F0900_P1_RX_FAIL 0xf1a50080
-#define F0900_P1_FIFO_PARITYFAIL 0xf1a50040
-#define F0900_P1_RX_NONBYTE 0xf1a50020
-#define F0900_P1_FIFO_OVERFLOW 0xf1a50010
-#define F0900_P1_FIFO_BYTENBR 0xf1a5000f
+#define R0900_P1_DISRX_ST1 0xf1a5
+#define DISRX_ST1 shiftx(R0900_P1_DISRX_ST1, demod, 0x10)
+#define F0900_P1_RX_FAIL 0xf1a50080
+#define F0900_P1_FIFO_PARITYFAIL 0xf1a50040
+#define F0900_P1_RX_NONBYTE 0xf1a50020
+#define F0900_P1_FIFO_OVERFLOW 0xf1a50010
+#define F0900_P1_FIFO_BYTENBR 0xf1a5000f
+#define FIFO_BYTENBR shiftx(F0900_P1_FIFO_BYTENBR, demod, 0x100000)
/*P1_DISRXDATA*/
-#define R0900_P1_DISRXDATA 0xf1a6
-#define F0900_P1_DISRX_DATA 0xf1a600ff
+#define R0900_P1_DISRXDATA 0xf1a6
+#define DISRXDATA shiftx(R0900_P1_DISRXDATA, demod, 0x10)
+#define F0900_P1_DISRX_DATA 0xf1a600ff
/*P1_DISTXDATA*/
-#define R0900_P1_DISTXDATA 0xf1a7
-#define F0900_P1_DISEQC_FIFO 0xf1a700ff
+#define R0900_P1_DISTXDATA 0xf1a7
+#define DISTXDATA shiftx(R0900_P1_DISTXDATA, demod, 0x10)
+#define F0900_P1_DISEQC_FIFO 0xf1a700ff
/*P1_DISTXSTATUS*/
-#define R0900_P1_DISTXSTATUS 0xf1a8
-#define F0900_P1_TX_FAIL 0xf1a80080
-#define F0900_P1_FIFO_FULL 0xf1a80040
-#define F0900_P1_TX_IDLE 0xf1a80020
-#define F0900_P1_GAP_BURST 0xf1a80010
-#define F0900_P1_TXFIFO_BYTES 0xf1a8000f
+#define R0900_P1_DISTXSTATUS 0xf1a8
+#define F0900_P1_TX_FAIL 0xf1a80080
+#define F0900_P1_FIFO_FULL 0xf1a80040
+#define FIFO_FULL shiftx(F0900_P1_FIFO_FULL, demod, 0x100000)
+#define F0900_P1_TX_IDLE 0xf1a80020
+#define TX_IDLE shiftx(F0900_P1_TX_IDLE, demod, 0x100000)
+#define F0900_P1_GAP_BURST 0xf1a80010
+#define F0900_P1_TXFIFO_BYTES 0xf1a8000f
/*P1_F22TX*/
-#define R0900_P1_F22TX 0xf1a9
-#define F0900_P1_F22_REG 0xf1a900ff
+#define R0900_P1_F22TX 0xf1a9
+#define F22TX shiftx(R0900_P1_F22TX, demod, 0x10)
+#define F0900_P1_F22_REG 0xf1a900ff
/*P1_F22RX*/
-#define R0900_P1_F22RX 0xf1aa
-#define F0900_P1_F22RX_REG 0xf1aa00ff
+#define R0900_P1_F22RX 0xf1aa
+#define F22RX shiftx(R0900_P1_F22RX, demod, 0x10)
+#define F0900_P1_F22RX_REG 0xf1aa00ff
/*P1_ACRPRESC*/
-#define R0900_P1_ACRPRESC 0xf1ac
-#define F0900_P1_ACR_CODFRDY 0xf1ac0008
-#define F0900_P1_ACR_PRESC 0xf1ac0007
+#define R0900_P1_ACRPRESC 0xf1ac
+#define ACRPRESC shiftx(R0900_P1_ACRPRESC, demod, 0x10)
+#define F0900_P1_ACR_PRESC 0xf1ac0007
/*P1_ACRDIV*/
-#define R0900_P1_ACRDIV 0xf1ad
-#define F0900_P1_ACR_DIV 0xf1ad00ff
+#define R0900_P1_ACRDIV 0xf1ad
+#define ACRDIV shiftx(R0900_P1_ACRDIV, demod, 0x10)
+#define F0900_P1_ACR_DIV 0xf1ad00ff
/*NCOARSE*/
-#define R0900_NCOARSE 0xf1b3
-#define F0900_M_DIV 0xf1b300ff
+#define R0900_NCOARSE 0xf1b3
+#define F0900_M_DIV 0xf1b300ff
/*SYNTCTRL*/
-#define R0900_SYNTCTRL 0xf1b6
-#define F0900_STANDBY 0xf1b60080
-#define F0900_BYPASSPLLCORE 0xf1b60040
-#define F0900_SELX1RATIO 0xf1b60020
-#define F0900_I2C_TUD 0xf1b60010
-#define F0900_STOP_PLL 0xf1b60008
-#define F0900_BYPASSPLLFSK 0xf1b60004
-#define F0900_SELOSCI 0xf1b60002
-#define F0900_BYPASSPLLADC 0xf1b60001
+#define R0900_SYNTCTRL 0xf1b6
+#define F0900_STANDBY 0xf1b60080
+#define F0900_BYPASSPLLCORE 0xf1b60040
+#define F0900_SELX1RATIO 0xf1b60020
+#define F0900_STOP_PLL 0xf1b60008
+#define F0900_BYPASSPLLFSK 0xf1b60004
+#define F0900_SELOSCI 0xf1b60002
+#define F0900_BYPASSPLLADC 0xf1b60001
/*FILTCTRL*/
-#define R0900_FILTCTRL 0xf1b7
-#define F0900_INV_CLK135 0xf1b70080
-#define F0900_PERM_BYPDIS 0xf1b70040
-#define F0900_SEL_FSKCKDIV 0xf1b70004
-#define F0900_INV_CLKFSK 0xf1b70002
-#define F0900_BYPASS_APPLI 0xf1b70001
+#define R0900_FILTCTRL 0xf1b7
+#define F0900_INV_CLK135 0xf1b70080
+#define F0900_SEL_FSKCKDIV 0xf1b70004
+#define F0900_INV_CLKFSK 0xf1b70002
+#define F0900_BYPASS_APPLI 0xf1b70001
/*PLLSTAT*/
-#define R0900_PLLSTAT 0xf1b8
-#define F0900_ACM_SEL 0xf1b80080
-#define F0900_DTV_SEL 0xf1b80040
-#define F0900_PLLLOCK 0xf1b80001
+#define R0900_PLLSTAT 0xf1b8
+#define F0900_PLLLOCK 0xf1b80001
/*STOPCLK1*/
-#define R0900_STOPCLK1 0xf1c2
-#define F0900_STOP_CLKPKDT2 0xf1c20040
-#define F0900_STOP_CLKPKDT1 0xf1c20020
-#define F0900_STOP_CLKFEC 0xf1c20010
-#define F0900_STOP_CLKADCI2 0xf1c20008
-#define F0900_INV_CLKADCI2 0xf1c20004
-#define F0900_STOP_CLKADCI1 0xf1c20002
-#define F0900_INV_CLKADCI1 0xf1c20001
+#define R0900_STOPCLK1 0xf1c2
+#define F0900_STOP_CLKPKDT2 0xf1c20040
+#define F0900_STOP_CLKPKDT1 0xf1c20020
+#define F0900_STOP_CLKFEC 0xf1c20010
+#define F0900_STOP_CLKADCI2 0xf1c20008
+#define F0900_INV_CLKADCI2 0xf1c20004
+#define F0900_STOP_CLKADCI1 0xf1c20002
+#define F0900_INV_CLKADCI1 0xf1c20001
/*STOPCLK2*/
-#define R0900_STOPCLK2 0xf1c3
-#define F0900_STOP_CLKSAMP2 0xf1c30010
-#define F0900_STOP_CLKSAMP1 0xf1c30008
-#define F0900_STOP_CLKVIT2 0xf1c30004
-#define F0900_STOP_CLKVIT1 0xf1c30002
-#define F0900_STOP_CLKTS 0xf1c30001
+#define R0900_STOPCLK2 0xf1c3
+#define F0900_STOP_CLKSAMP2 0xf1c30010
+#define F0900_STOP_CLKSAMP1 0xf1c30008
+#define F0900_STOP_CLKVIT2 0xf1c30004
+#define F0900_STOP_CLKVIT1 0xf1c30002
+#define STOP_CLKVIT shiftx(F0900_STOP_CLKVIT1, demod, -2)
+#define F0900_STOP_CLKTS 0xf1c30001
/*TSTTNR0*/
-#define R0900_TSTTNR0 0xf1df
-#define F0900_SEL_FSK 0xf1df0080
-#define F0900_FSK_PON 0xf1df0004
-#define F0900_FSK_OPENLOOP 0xf1df0002
+#define R0900_TSTTNR0 0xf1df
+#define F0900_SEL_FSK 0xf1df0080
+#define F0900_FSK_PON 0xf1df0004
/*TSTTNR1*/
-#define R0900_TSTTNR1 0xf1e0
-#define F0900_BYPASS_ADC1 0xf1e00080
-#define F0900_INVADC1_CKOUT 0xf1e00040
-#define F0900_SELIQSRC1 0xf1e00030
-#define F0900_ADC1_PON 0xf1e00002
-#define F0900_ADC1_INMODE 0xf1e00001
+#define R0900_TSTTNR1 0xf1e0
+#define F0900_ADC1_PON 0xf1e00002
+#define F0900_ADC1_INMODE 0xf1e00001
/*TSTTNR2*/
-#define R0900_TSTTNR2 0xf1e1
-#define F0900_DISEQC1_PON 0xf1e10020
-#define F0900_DISEQC1_TEST 0xf1e1001f
+#define R0900_TSTTNR2 0xf1e1
+#define F0900_DISEQC1_PON 0xf1e10020
/*TSTTNR3*/
-#define R0900_TSTTNR3 0xf1e2
-#define F0900_BYPASS_ADC2 0xf1e20080
-#define F0900_INVADC2_CKOUT 0xf1e20040
-#define F0900_SELIQSRC2 0xf1e20030
-#define F0900_ADC2_PON 0xf1e20002
-#define F0900_ADC2_INMODE 0xf1e20001
+#define R0900_TSTTNR3 0xf1e2
+#define F0900_ADC2_PON 0xf1e20002
+#define F0900_ADC2_INMODE 0xf1e20001
/*TSTTNR4*/
-#define R0900_TSTTNR4 0xf1e3
-#define F0900_DISEQC2_PON 0xf1e30020
-#define F0900_DISEQC2_TEST 0xf1e3001f
+#define R0900_TSTTNR4 0xf1e3
+#define F0900_DISEQC2_PON 0xf1e30020
/*P2_IQCONST*/
-#define R0900_P2_IQCONST 0xf200
-#define F0900_P2_CONSTEL_SELECT 0xf2000060
-#define F0900_P2_IQSYMB_SEL 0xf200001f
+#define R0900_P2_IQCONST 0xf200
+#define F0900_P2_CONSTEL_SELECT 0xf2000060
+#define F0900_P2_IQSYMB_SEL 0xf200001f
/*P2_NOSCFG*/
-#define R0900_P2_NOSCFG 0xf201
-#define F0900_P2_DUMMYPL_NOSDATA 0xf2010020
-#define F0900_P2_NOSPLH_BETA 0xf2010018
-#define F0900_P2_NOSDATA_BETA 0xf2010007
+#define R0900_P2_NOSCFG 0xf201
+#define F0900_P2_DUMMYPL_NOSDATA 0xf2010020
+#define F0900_P2_NOSPLH_BETA 0xf2010018
+#define F0900_P2_NOSDATA_BETA 0xf2010007
/*P2_ISYMB*/
-#define R0900_P2_ISYMB 0xf202
-#define F0900_P2_I_SYMBOL 0xf20201ff
+#define R0900_P2_ISYMB 0xf202
+#define F0900_P2_I_SYMBOL 0xf20201ff
/*P2_QSYMB*/
-#define R0900_P2_QSYMB 0xf203
-#define F0900_P2_Q_SYMBOL 0xf20301ff
+#define R0900_P2_QSYMB 0xf203
+#define F0900_P2_Q_SYMBOL 0xf20301ff
/*P2_AGC1CFG*/
-#define R0900_P2_AGC1CFG 0xf204
-#define F0900_P2_DC_FROZEN 0xf2040080
-#define F0900_P2_DC_CORRECT 0xf2040040
-#define F0900_P2_AMM_FROZEN 0xf2040020
-#define F0900_P2_AMM_CORRECT 0xf2040010
-#define F0900_P2_QUAD_FROZEN 0xf2040008
-#define F0900_P2_QUAD_CORRECT 0xf2040004
-#define F0900_P2_DCCOMP_SLOW 0xf2040002
-#define F0900_P2_IQMISM_SLOW 0xf2040001
+#define R0900_P2_AGC1CFG 0xf204
+#define F0900_P2_DC_FROZEN 0xf2040080
+#define F0900_P2_DC_CORRECT 0xf2040040
+#define F0900_P2_AMM_FROZEN 0xf2040020
+#define F0900_P2_AMM_CORRECT 0xf2040010
+#define F0900_P2_QUAD_FROZEN 0xf2040008
+#define F0900_P2_QUAD_CORRECT 0xf2040004
/*P2_AGC1CN*/
-#define R0900_P2_AGC1CN 0xf206
-#define F0900_P2_AGC1_LOCKED 0xf2060080
-#define F0900_P2_AGC1_OVERFLOW 0xf2060040
-#define F0900_P2_AGC1_NOSLOWLK 0xf2060020
-#define F0900_P2_AGC1_MINPOWER 0xf2060010
-#define F0900_P2_AGCOUT_FAST 0xf2060008
-#define F0900_P2_AGCIQ_BETA 0xf2060007
+#define R0900_P2_AGC1CN 0xf206
+#define F0900_P2_AGC1_LOCKED 0xf2060080
+#define F0900_P2_AGC1_MINPOWER 0xf2060010
+#define F0900_P2_AGCOUT_FAST 0xf2060008
+#define F0900_P2_AGCIQ_BETA 0xf2060007
/*P2_AGC1REF*/
-#define R0900_P2_AGC1REF 0xf207
-#define F0900_P2_AGCIQ_REF 0xf20700ff
+#define R0900_P2_AGC1REF 0xf207
+#define F0900_P2_AGCIQ_REF 0xf20700ff
/*P2_IDCCOMP*/
-#define R0900_P2_IDCCOMP 0xf208
-#define F0900_P2_IAVERAGE_ADJ 0xf20801ff
+#define R0900_P2_IDCCOMP 0xf208
+#define F0900_P2_IAVERAGE_ADJ 0xf20801ff
/*P2_QDCCOMP*/
-#define R0900_P2_QDCCOMP 0xf209
-#define F0900_P2_QAVERAGE_ADJ 0xf20901ff
+#define R0900_P2_QDCCOMP 0xf209
+#define F0900_P2_QAVERAGE_ADJ 0xf20901ff
/*P2_POWERI*/
-#define R0900_P2_POWERI 0xf20a
-#define F0900_P2_POWER_I 0xf20a00ff
+#define R0900_P2_POWERI 0xf20a
+#define F0900_P2_POWER_I 0xf20a00ff
/*P2_POWERQ*/
-#define R0900_P2_POWERQ 0xf20b
-#define F0900_P2_POWER_Q 0xf20b00ff
+#define R0900_P2_POWERQ 0xf20b
+#define F0900_P2_POWER_Q 0xf20b00ff
/*P2_AGC1AMM*/
-#define R0900_P2_AGC1AMM 0xf20c
-#define F0900_P2_AMM_VALUE 0xf20c00ff
+#define R0900_P2_AGC1AMM 0xf20c
+#define F0900_P2_AMM_VALUE 0xf20c00ff
/*P2_AGC1QUAD*/
-#define R0900_P2_AGC1QUAD 0xf20d
-#define F0900_P2_QUAD_VALUE 0xf20d01ff
+#define R0900_P2_AGC1QUAD 0xf20d
+#define F0900_P2_QUAD_VALUE 0xf20d01ff
/*P2_AGCIQIN1*/
-#define R0900_P2_AGCIQIN1 0xf20e
-#define F0900_P2_AGCIQ_VALUE1 0xf20e00ff
+#define R0900_P2_AGCIQIN1 0xf20e
+#define F0900_P2_AGCIQ_VALUE1 0xf20e00ff
/*P2_AGCIQIN0*/
-#define R0900_P2_AGCIQIN0 0xf20f
-#define F0900_P2_AGCIQ_VALUE0 0xf20f00ff
+#define R0900_P2_AGCIQIN0 0xf20f
+#define F0900_P2_AGCIQ_VALUE0 0xf20f00ff
/*P2_DEMOD*/
-#define R0900_P2_DEMOD 0xf210
-#define F0900_P2_DEMOD_STOP 0xf2100040
-#define F0900_P2_SPECINV_CONTROL 0xf2100030
-#define F0900_P2_FORCE_ENASAMP 0xf2100008
-#define F0900_P2_MANUAL_ROLLOFF 0xf2100004
-#define F0900_P2_ROLLOFF_CONTROL 0xf2100003
+#define R0900_P2_DEMOD 0xf210
+#define F0900_P2_MANUALS2_ROLLOFF 0xf2100080
+#define F0900_P2_SPECINV_CONTROL 0xf2100030
+#define F0900_P2_FORCE_ENASAMP 0xf2100008
+#define F0900_P2_MANUALSX_ROLLOFF 0xf2100004
+#define F0900_P2_ROLLOFF_CONTROL 0xf2100003
/*P2_DMDMODCOD*/
-#define R0900_P2_DMDMODCOD 0xf211
-#define F0900_P2_MANUAL_MODCOD 0xf2110080
-#define F0900_P2_DEMOD_MODCOD 0xf211007c
-#define F0900_P2_DEMOD_TYPE 0xf2110003
+#define R0900_P2_DMDMODCOD 0xf211
+#define F0900_P2_MANUAL_MODCOD 0xf2110080
+#define F0900_P2_DEMOD_MODCOD 0xf211007c
+#define F0900_P2_DEMOD_TYPE 0xf2110003
/*P2_DSTATUS*/
-#define R0900_P2_DSTATUS 0xf212
-#define F0900_P2_CAR_LOCK 0xf2120080
-#define F0900_P2_TMGLOCK_QUALITY 0xf2120060
-#define F0900_P2_SDVBS1_ENABLE 0xf2120010
-#define F0900_P2_LOCK_DEFINITIF 0xf2120008
-#define F0900_P2_TIMING_IS_LOCKED 0xf2120004
-#define F0900_P2_COARSE_TMGLOCK 0xf2120002
-#define F0900_P2_COARSE_CARLOCK 0xf2120001
+#define R0900_P2_DSTATUS 0xf212
+#define F0900_P2_CAR_LOCK 0xf2120080
+#define F0900_P2_TMGLOCK_QUALITY 0xf2120060
+#define F0900_P2_LOCK_DEFINITIF 0xf2120008
+#define F0900_P2_OVADC_DETECT 0xf2120001
/*P2_DSTATUS2*/
-#define R0900_P2_DSTATUS2 0xf213
-#define F0900_P2_DEMOD_DELOCK 0xf2130080
-#define F0900_P2_DEMOD_TIMEOUT 0xf2130040
-#define F0900_P2_MODCODRQ_SYNCTAG 0xf2130020
-#define F0900_P2_POLYPH_SATEVENT 0xf2130010
-#define F0900_P2_AGC1_NOSIGNALACK 0xf2130008
-#define F0900_P2_AGC2_OVERFLOW 0xf2130004
-#define F0900_P2_CFR_OVERFLOW 0xf2130002
-#define F0900_P2_GAMMA_OVERUNDER 0xf2130001
+#define R0900_P2_DSTATUS2 0xf213
+#define F0900_P2_DEMOD_DELOCK 0xf2130080
+#define F0900_P2_AGC1_NOSIGNALACK 0xf2130008
+#define F0900_P2_AGC2_OVERFLOW 0xf2130004
+#define F0900_P2_CFR_OVERFLOW 0xf2130002
+#define F0900_P2_GAMMA_OVERUNDER 0xf2130001
/*P2_DMDCFGMD*/
-#define R0900_P2_DMDCFGMD 0xf214
-#define F0900_P2_DVBS2_ENABLE 0xf2140080
-#define F0900_P2_DVBS1_ENABLE 0xf2140040
-#define F0900_P2_CFR_AUTOSCAN 0xf2140020
-#define F0900_P2_SCAN_ENABLE 0xf2140010
-#define F0900_P2_TUN_AUTOSCAN 0xf2140008
-#define F0900_P2_NOFORCE_RELOCK 0xf2140004
-#define F0900_P2_TUN_RNG 0xf2140003
+#define R0900_P2_DMDCFGMD 0xf214
+#define F0900_P2_DVBS2_ENABLE 0xf2140080
+#define F0900_P2_DVBS1_ENABLE 0xf2140040
+#define F0900_P2_SCAN_ENABLE 0xf2140010
+#define F0900_P2_CFR_AUTOSCAN 0xf2140008
+#define F0900_P2_TUN_RNG 0xf2140003
/*P2_DMDCFG2*/
-#define R0900_P2_DMDCFG2 0xf215
-#define F0900_P2_AGC1_WAITLOCK 0xf2150080
-#define F0900_P2_S1S2_SEQUENTIAL 0xf2150040
-#define F0900_P2_OVERFLOW_TIMEOUT 0xf2150020
-#define F0900_P2_SCANFAIL_TIMEOUT 0xf2150010
-#define F0900_P2_DMDTOUT_BACK 0xf2150008
-#define F0900_P2_CARLOCK_S1ENABLE 0xf2150004
-#define F0900_P2_COARSE_LK3MODE 0xf2150002
-#define F0900_P2_COARSE_LK2MODE 0xf2150001
+#define R0900_P2_DMDCFG2 0xf215
+#define F0900_P2_S1S2_SEQUENTIAL 0xf2150040
+#define F0900_P2_INFINITE_RELOCK 0xf2150010
/*P2_DMDISTATE*/
-#define R0900_P2_DMDISTATE 0xf216
-#define F0900_P2_I2C_NORESETDMODE 0xf2160080
-#define F0900_P2_FORCE_ETAPED 0xf2160040
-#define F0900_P2_SDMDRST_DIRCLK 0xf2160020
-#define F0900_P2_I2C_DEMOD_MODE 0xf216001f
+#define R0900_P2_DMDISTATE 0xf216
+#define F0900_P2_I2C_DEMOD_MODE 0xf216001f
/*P2_DMDT0M*/
-#define R0900_P2_DMDT0M 0xf217
-#define F0900_P2_DMDT0_MIN 0xf21700ff
+#define R0900_P2_DMDT0M 0xf217
+#define F0900_P2_DMDT0_MIN 0xf21700ff
/*P2_DMDSTATE*/
-#define R0900_P2_DMDSTATE 0xf21b
-#define F0900_P2_DEMOD_LOCKED 0xf21b0080
-#define F0900_P2_HEADER_MODE 0xf21b0060
-#define F0900_P2_DEMOD_MODE 0xf21b001f
+#define R0900_P2_DMDSTATE 0xf21b
+#define F0900_P2_HEADER_MODE 0xf21b0060
/*P2_DMDFLYW*/
-#define R0900_P2_DMDFLYW 0xf21c
-#define F0900_P2_I2C_IRQVAL 0xf21c00f0
-#define F0900_P2_FLYWHEEL_CPT 0xf21c000f
+#define R0900_P2_DMDFLYW 0xf21c
+#define F0900_P2_I2C_IRQVAL 0xf21c00f0
+#define F0900_P2_FLYWHEEL_CPT 0xf21c000f
/*P2_DSTATUS3*/
-#define R0900_P2_DSTATUS3 0xf21d
-#define F0900_P2_CFR_ZIGZAG 0xf21d0080
-#define F0900_P2_DEMOD_CFGMODE 0xf21d0060
-#define F0900_P2_GAMMA_LOWBAUDRATE 0xf21d0010
-#define F0900_P2_RELOCK_MODE 0xf21d0008
-#define F0900_P2_DEMOD_FAIL 0xf21d0004
-#define F0900_P2_ETAPE1A_DVBXMEM 0xf21d0003
+#define R0900_P2_DSTATUS3 0xf21d
+#define F0900_P2_DEMOD_CFGMODE 0xf21d0060
/*P2_DMDCFG3*/
-#define R0900_P2_DMDCFG3 0xf21e
-#define F0900_P2_DVBS1_TMGWAIT 0xf21e0080
-#define F0900_P2_NO_BWCENTERING 0xf21e0040
-#define F0900_P2_INV_SEQSRCH 0xf21e0020
-#define F0900_P2_DIS_SFRUPLOW_TRK 0xf21e0010
-#define F0900_P2_NOSTOP_FIFOFULL 0xf21e0008
-#define F0900_P2_LOCKTIME_MODE 0xf21e0007
+#define R0900_P2_DMDCFG3 0xf21e
+#define F0900_P2_NOSTOP_FIFOFULL 0xf21e0008
/*P2_DMDCFG4*/
-#define R0900_P2_DMDCFG4 0xf21f
-#define F0900_P2_TUNER_NRELAUNCH 0xf21f0008
-#define F0900_P2_DIS_CLKENABLE 0xf21f0004
-#define F0900_P2_DIS_HDRDIVLOCK 0xf21f0002
-#define F0900_P2_NO_TNRWBINIT 0xf21f0001
+#define R0900_P2_DMDCFG4 0xf21f
+#define F0900_P2_TUNER_NRELAUNCH 0xf21f0008
/*P2_CORRELMANT*/
-#define R0900_P2_CORRELMANT 0xf220
-#define F0900_P2_CORREL_MANT 0xf22000ff
+#define R0900_P2_CORRELMANT 0xf220
+#define F0900_P2_CORREL_MANT 0xf22000ff
/*P2_CORRELABS*/
-#define R0900_P2_CORRELABS 0xf221
-#define F0900_P2_CORREL_ABS 0xf22100ff
+#define R0900_P2_CORRELABS 0xf221
+#define F0900_P2_CORREL_ABS 0xf22100ff
/*P2_CORRELEXP*/
-#define R0900_P2_CORRELEXP 0xf222
-#define F0900_P2_CORREL_ABSEXP 0xf22200f0
-#define F0900_P2_CORREL_EXP 0xf222000f
+#define R0900_P2_CORRELEXP 0xf222
+#define F0900_P2_CORREL_ABSEXP 0xf22200f0
+#define F0900_P2_CORREL_EXP 0xf222000f
/*P2_PLHMODCOD*/
-#define R0900_P2_PLHMODCOD 0xf224
-#define F0900_P2_SPECINV_DEMOD 0xf2240080
-#define F0900_P2_PLH_MODCOD 0xf224007c
-#define F0900_P2_PLH_TYPE 0xf2240003
+#define R0900_P2_PLHMODCOD 0xf224
+#define F0900_P2_SPECINV_DEMOD 0xf2240080
+#define F0900_P2_PLH_MODCOD 0xf224007c
+#define F0900_P2_PLH_TYPE 0xf2240003
-/*P2_AGCK32*/
-#define R0900_P2_AGCK32 0xf22b
-#define F0900_P2_R3ADJOFF_32APSK 0xf22b0080
-#define F0900_P2_R2ADJOFF_32APSK 0xf22b0040
-#define F0900_P2_R1ADJOFF_32APSK 0xf22b0020
-#define F0900_P2_RADJ_32APSK 0xf22b001f
+/*P2_DMDREG*/
+#define R0900_P2_DMDREG 0xf225
+#define F0900_P2_DECIM_PLFRAMES 0xf2250001
/*P2_AGC2O*/
-#define R0900_P2_AGC2O 0xf22c
-#define F0900_P2_AGC2REF_ADJUSTING 0xf22c0080
-#define F0900_P2_AGC2_COARSEFAST 0xf22c0040
-#define F0900_P2_AGC2_LKSQRT 0xf22c0020
-#define F0900_P2_AGC2_LKMODE 0xf22c0010
-#define F0900_P2_AGC2_LKEQUA 0xf22c0008
-#define F0900_P2_AGC2_COEF 0xf22c0007
+#define R0900_P2_AGC2O 0xf22c
+#define F0900_P2_AGC2_COEF 0xf22c0007
/*P2_AGC2REF*/
-#define R0900_P2_AGC2REF 0xf22d
-#define F0900_P2_AGC2_REF 0xf22d00ff
+#define R0900_P2_AGC2REF 0xf22d
+#define F0900_P2_AGC2_REF 0xf22d00ff
/*P2_AGC1ADJ*/
-#define R0900_P2_AGC1ADJ 0xf22e
-#define F0900_P2_AGC1ADJ_MANUAL 0xf22e0080
-#define F0900_P2_AGC1_ADJUSTED 0xf22e017f
+#define R0900_P2_AGC1ADJ 0xf22e
+#define F0900_P2_AGC1_ADJUSTED 0xf22e007f
/*P2_AGC2I1*/
-#define R0900_P2_AGC2I1 0xf236
-#define F0900_P2_AGC2_INTEGRATOR1 0xf23600ff
+#define R0900_P2_AGC2I1 0xf236
+#define F0900_P2_AGC2_INTEGRATOR1 0xf23600ff
/*P2_AGC2I0*/
-#define R0900_P2_AGC2I0 0xf237
-#define F0900_P2_AGC2_INTEGRATOR0 0xf23700ff
+#define R0900_P2_AGC2I0 0xf237
+#define F0900_P2_AGC2_INTEGRATOR0 0xf23700ff
/*P2_CARCFG*/
-#define R0900_P2_CARCFG 0xf238
-#define F0900_P2_CFRUPLOW_AUTO 0xf2380080
-#define F0900_P2_CFRUPLOW_TEST 0xf2380040
-#define F0900_P2_EN_CAR2CENTER 0xf2380020
-#define F0900_P2_CARHDR_NODIV8 0xf2380010
-#define F0900_P2_I2C_ROTA 0xf2380008
-#define F0900_P2_ROTAON 0xf2380004
-#define F0900_P2_PH_DET_ALGO 0xf2380003
+#define R0900_P2_CARCFG 0xf238
+#define F0900_P2_CFRUPLOW_AUTO 0xf2380080
+#define F0900_P2_CFRUPLOW_TEST 0xf2380040
+#define F0900_P2_ROTAON 0xf2380004
+#define F0900_P2_PH_DET_ALGO 0xf2380003
/*P2_ACLC*/
-#define R0900_P2_ACLC 0xf239
-#define F0900_P2_STOP_S2ALPHA 0xf23900c0
-#define F0900_P2_CAR_ALPHA_MANT 0xf2390030
-#define F0900_P2_CAR_ALPHA_EXP 0xf239000f
+#define R0900_P2_ACLC 0xf239
+#define F0900_P2_CAR_ALPHA_MANT 0xf2390030
+#define F0900_P2_CAR_ALPHA_EXP 0xf239000f
/*P2_BCLC*/
-#define R0900_P2_BCLC 0xf23a
-#define F0900_P2_STOP_S2BETA 0xf23a00c0
-#define F0900_P2_CAR_BETA_MANT 0xf23a0030
-#define F0900_P2_CAR_BETA_EXP 0xf23a000f
+#define R0900_P2_BCLC 0xf23a
+#define F0900_P2_CAR_BETA_MANT 0xf23a0030
+#define F0900_P2_CAR_BETA_EXP 0xf23a000f
/*P2_CARFREQ*/
-#define R0900_P2_CARFREQ 0xf23d
-#define F0900_P2_KC_COARSE_EXP 0xf23d00f0
-#define F0900_P2_BETA_FREQ 0xf23d000f
+#define R0900_P2_CARFREQ 0xf23d
+#define F0900_P2_KC_COARSE_EXP 0xf23d00f0
+#define F0900_P2_BETA_FREQ 0xf23d000f
/*P2_CARHDR*/
-#define R0900_P2_CARHDR 0xf23e
-#define F0900_P2_K_FREQ_HDR 0xf23e00ff
+#define R0900_P2_CARHDR 0xf23e
+#define F0900_P2_K_FREQ_HDR 0xf23e00ff
/*P2_LDT*/
-#define R0900_P2_LDT 0xf23f
-#define F0900_P2_CARLOCK_THRES 0xf23f01ff
+#define R0900_P2_LDT 0xf23f
+#define F0900_P2_CARLOCK_THRES 0xf23f01ff
/*P2_LDT2*/
-#define R0900_P2_LDT2 0xf240
-#define F0900_P2_CARLOCK_THRES2 0xf24001ff
+#define R0900_P2_LDT2 0xf240
+#define F0900_P2_CARLOCK_THRES2 0xf24001ff
/*P2_CFRICFG*/
-#define R0900_P2_CFRICFG 0xf241
-#define F0900_P2_CFRINIT_UNVALRNG 0xf2410080
-#define F0900_P2_CFRINIT_LUNVALCPT 0xf2410040
-#define F0900_P2_CFRINIT_ABORTDBL 0xf2410020
-#define F0900_P2_CFRINIT_ABORTPRED 0xf2410010
-#define F0900_P2_CFRINIT_UNVALSKIP 0xf2410008
-#define F0900_P2_CFRINIT_CSTINC 0xf2410004
-#define F0900_P2_NEG_CFRSTEP 0xf2410001
+#define R0900_P2_CFRICFG 0xf241
+#define F0900_P2_NEG_CFRSTEP 0xf2410001
/*P2_CFRUP1*/
-#define R0900_P2_CFRUP1 0xf242
-#define F0900_P2_CFR_UP1 0xf24201ff
+#define R0900_P2_CFRUP1 0xf242
+#define F0900_P2_CFR_UP1 0xf24201ff
/*P2_CFRUP0*/
-#define R0900_P2_CFRUP0 0xf243
-#define F0900_P2_CFR_UP0 0xf24300ff
+#define R0900_P2_CFRUP0 0xf243
+#define F0900_P2_CFR_UP0 0xf24300ff
/*P2_CFRLOW1*/
-#define R0900_P2_CFRLOW1 0xf246
-#define F0900_P2_CFR_LOW1 0xf24601ff
+#define R0900_P2_CFRLOW1 0xf246
+#define F0900_P2_CFR_LOW1 0xf24601ff
/*P2_CFRLOW0*/
-#define R0900_P2_CFRLOW0 0xf247
-#define F0900_P2_CFR_LOW0 0xf24700ff
+#define R0900_P2_CFRLOW0 0xf247
+#define F0900_P2_CFR_LOW0 0xf24700ff
/*P2_CFRINIT1*/
-#define R0900_P2_CFRINIT1 0xf248
-#define F0900_P2_CFR_INIT1 0xf24801ff
+#define R0900_P2_CFRINIT1 0xf248
+#define F0900_P2_CFR_INIT1 0xf24801ff
/*P2_CFRINIT0*/
-#define R0900_P2_CFRINIT0 0xf249
-#define F0900_P2_CFR_INIT0 0xf24900ff
+#define R0900_P2_CFRINIT0 0xf249
+#define F0900_P2_CFR_INIT0 0xf24900ff
/*P2_CFRINC1*/
-#define R0900_P2_CFRINC1 0xf24a
-#define F0900_P2_MANUAL_CFRINC 0xf24a0080
-#define F0900_P2_CFR_INC1 0xf24a017f
+#define R0900_P2_CFRINC1 0xf24a
+#define F0900_P2_MANUAL_CFRINC 0xf24a0080
+#define F0900_P2_CFR_INC1 0xf24a003f
/*P2_CFRINC0*/
-#define R0900_P2_CFRINC0 0xf24b
-#define F0900_P2_CFR_INC0 0xf24b00f0
+#define R0900_P2_CFRINC0 0xf24b
+#define F0900_P2_CFR_INC0 0xf24b00f8
/*P2_CFR2*/
-#define R0900_P2_CFR2 0xf24c
-#define F0900_P2_CAR_FREQ2 0xf24c01ff
+#define R0900_P2_CFR2 0xf24c
+#define F0900_P2_CAR_FREQ2 0xf24c01ff
/*P2_CFR1*/
-#define R0900_P2_CFR1 0xf24d
-#define F0900_P2_CAR_FREQ1 0xf24d00ff
+#define R0900_P2_CFR1 0xf24d
+#define F0900_P2_CAR_FREQ1 0xf24d00ff
/*P2_CFR0*/
-#define R0900_P2_CFR0 0xf24e
-#define F0900_P2_CAR_FREQ0 0xf24e00ff
+#define R0900_P2_CFR0 0xf24e
+#define F0900_P2_CAR_FREQ0 0xf24e00ff
/*P2_LDI*/
-#define R0900_P2_LDI 0xf24f
-#define F0900_P2_LOCK_DET_INTEGR 0xf24f01ff
+#define R0900_P2_LDI 0xf24f
+#define F0900_P2_LOCK_DET_INTEGR 0xf24f01ff
/*P2_TMGCFG*/
-#define R0900_P2_TMGCFG 0xf250
-#define F0900_P2_TMGLOCK_BETA 0xf25000c0
-#define F0900_P2_NOTMG_GROUPDELAY 0xf2500020
-#define F0900_P2_DO_TIMING_CORR 0xf2500010
-#define F0900_P2_MANUAL_SCAN 0xf250000c
-#define F0900_P2_TMG_MINFREQ 0xf2500003
+#define R0900_P2_TMGCFG 0xf250
+#define F0900_P2_TMGLOCK_BETA 0xf25000c0
+#define F0900_P2_DO_TIMING_CORR 0xf2500010
+#define F0900_P2_TMG_MINFREQ 0xf2500003
/*P2_RTC*/
-#define R0900_P2_RTC 0xf251
-#define F0900_P2_TMGALPHA_EXP 0xf25100f0
-#define F0900_P2_TMGBETA_EXP 0xf251000f
+#define R0900_P2_RTC 0xf251
+#define F0900_P2_TMGALPHA_EXP 0xf25100f0
+#define F0900_P2_TMGBETA_EXP 0xf251000f
/*P2_RTCS2*/
-#define R0900_P2_RTCS2 0xf252
-#define F0900_P2_TMGALPHAS2_EXP 0xf25200f0
-#define F0900_P2_TMGBETAS2_EXP 0xf252000f
+#define R0900_P2_RTCS2 0xf252
+#define F0900_P2_TMGALPHAS2_EXP 0xf25200f0
+#define F0900_P2_TMGBETAS2_EXP 0xf252000f
/*P2_TMGTHRISE*/
-#define R0900_P2_TMGTHRISE 0xf253
-#define F0900_P2_TMGLOCK_THRISE 0xf25300ff
+#define R0900_P2_TMGTHRISE 0xf253
+#define F0900_P2_TMGLOCK_THRISE 0xf25300ff
/*P2_TMGTHFALL*/
-#define R0900_P2_TMGTHFALL 0xf254
-#define F0900_P2_TMGLOCK_THFALL 0xf25400ff
+#define R0900_P2_TMGTHFALL 0xf254
+#define F0900_P2_TMGLOCK_THFALL 0xf25400ff
/*P2_SFRUPRATIO*/
-#define R0900_P2_SFRUPRATIO 0xf255
-#define F0900_P2_SFR_UPRATIO 0xf25500ff
+#define R0900_P2_SFRUPRATIO 0xf255
+#define F0900_P2_SFR_UPRATIO 0xf25500ff
/*P2_SFRLOWRATIO*/
-#define R0900_P2_SFRLOWRATIO 0xf256
-#define F0900_P2_SFR_LOWRATIO 0xf25600ff
+#define R0900_P2_SFRLOWRATIO 0xf256
+#define F0900_P2_SFR_LOWRATIO 0xf25600ff
/*P2_KREFTMG*/
-#define R0900_P2_KREFTMG 0xf258
-#define F0900_P2_KREF_TMG 0xf25800ff
+#define R0900_P2_KREFTMG 0xf258
+#define F0900_P2_KREF_TMG 0xf25800ff
/*P2_SFRSTEP*/
-#define R0900_P2_SFRSTEP 0xf259
-#define F0900_P2_SFR_SCANSTEP 0xf25900f0
-#define F0900_P2_SFR_CENTERSTEP 0xf259000f
+#define R0900_P2_SFRSTEP 0xf259
+#define F0900_P2_SFR_SCANSTEP 0xf25900f0
+#define F0900_P2_SFR_CENTERSTEP 0xf259000f
/*P2_TMGCFG2*/
-#define R0900_P2_TMGCFG2 0xf25a
-#define F0900_P2_DIS_AUTOSAMP 0xf25a0008
-#define F0900_P2_SCANINIT_QUART 0xf25a0004
-#define F0900_P2_NOTMG_DVBS1DERAT 0xf25a0002
-#define F0900_P2_SFRRATIO_FINE 0xf25a0001
+#define R0900_P2_TMGCFG2 0xf25a
+#define F0900_P2_SFRRATIO_FINE 0xf25a0001
+
+/*P2_KREFTMG2*/
+#define R0900_P2_KREFTMG2 0xf25b
+#define F0900_P2_KREF_TMG2 0xf25b00ff
/*P2_SFRINIT1*/
-#define R0900_P2_SFRINIT1 0xf25e
-#define F0900_P2_SFR_INIT1 0xf25e00ff
+#define R0900_P2_SFRINIT1 0xf25e
+#define F0900_P2_SFR_INIT1 0xf25e007f
/*P2_SFRINIT0*/
-#define R0900_P2_SFRINIT0 0xf25f
-#define F0900_P2_SFR_INIT0 0xf25f00ff
+#define R0900_P2_SFRINIT0 0xf25f
+#define F0900_P2_SFR_INIT0 0xf25f00ff
/*P2_SFRUP1*/
-#define R0900_P2_SFRUP1 0xf260
-#define F0900_P2_AUTO_GUP 0xf2600080
-#define F0900_P2_SYMB_FREQ_UP1 0xf260007f
+#define R0900_P2_SFRUP1 0xf260
+#define F0900_P2_AUTO_GUP 0xf2600080
+#define F0900_P2_SYMB_FREQ_UP1 0xf260007f
/*P2_SFRUP0*/
-#define R0900_P2_SFRUP0 0xf261
-#define F0900_P2_SYMB_FREQ_UP0 0xf26100ff
+#define R0900_P2_SFRUP0 0xf261
+#define F0900_P2_SYMB_FREQ_UP0 0xf26100ff
/*P2_SFRLOW1*/
-#define R0900_P2_SFRLOW1 0xf262
-#define F0900_P2_AUTO_GLOW 0xf2620080
-#define F0900_P2_SYMB_FREQ_LOW1 0xf262007f
+#define R0900_P2_SFRLOW1 0xf262
+#define F0900_P2_AUTO_GLOW 0xf2620080
+#define F0900_P2_SYMB_FREQ_LOW1 0xf262007f
/*P2_SFRLOW0*/
-#define R0900_P2_SFRLOW0 0xf263
-#define F0900_P2_SYMB_FREQ_LOW0 0xf26300ff
+#define R0900_P2_SFRLOW0 0xf263
+#define F0900_P2_SYMB_FREQ_LOW0 0xf26300ff
/*P2_SFR3*/
-#define R0900_P2_SFR3 0xf264
-#define F0900_P2_SYMB_FREQ3 0xf26400ff
+#define R0900_P2_SFR3 0xf264
+#define F0900_P2_SYMB_FREQ3 0xf26400ff
/*P2_SFR2*/
-#define R0900_P2_SFR2 0xf265
-#define F0900_P2_SYMB_FREQ2 0xf26500ff
+#define R0900_P2_SFR2 0xf265
+#define F0900_P2_SYMB_FREQ2 0xf26500ff
/*P2_SFR1*/
-#define R0900_P2_SFR1 0xf266
-#define F0900_P2_SYMB_FREQ1 0xf26600ff
+#define R0900_P2_SFR1 0xf266
+#define F0900_P2_SYMB_FREQ1 0xf26600ff
/*P2_SFR0*/
-#define R0900_P2_SFR0 0xf267
-#define F0900_P2_SYMB_FREQ0 0xf26700ff
+#define R0900_P2_SFR0 0xf267
+#define F0900_P2_SYMB_FREQ0 0xf26700ff
/*P2_TMGREG2*/
-#define R0900_P2_TMGREG2 0xf268
-#define F0900_P2_TMGREG2 0xf26800ff
+#define R0900_P2_TMGREG2 0xf268
+#define F0900_P2_TMGREG2 0xf26800ff
/*P2_TMGREG1*/
-#define R0900_P2_TMGREG1 0xf269
-#define F0900_P2_TMGREG1 0xf26900ff
+#define R0900_P2_TMGREG1 0xf269
+#define F0900_P2_TMGREG1 0xf26900ff
/*P2_TMGREG0*/
-#define R0900_P2_TMGREG0 0xf26a
-#define F0900_P2_TMGREG0 0xf26a00ff
+#define R0900_P2_TMGREG0 0xf26a
+#define F0900_P2_TMGREG0 0xf26a00ff
/*P2_TMGLOCK1*/
-#define R0900_P2_TMGLOCK1 0xf26b
-#define F0900_P2_TMGLOCK_LEVEL1 0xf26b01ff
+#define R0900_P2_TMGLOCK1 0xf26b
+#define F0900_P2_TMGLOCK_LEVEL1 0xf26b01ff
/*P2_TMGLOCK0*/
-#define R0900_P2_TMGLOCK0 0xf26c
-#define F0900_P2_TMGLOCK_LEVEL0 0xf26c00ff
+#define R0900_P2_TMGLOCK0 0xf26c
+#define F0900_P2_TMGLOCK_LEVEL0 0xf26c00ff
/*P2_TMGOBS*/
-#define R0900_P2_TMGOBS 0xf26d
-#define F0900_P2_ROLLOFF_STATUS 0xf26d00c0
-#define F0900_P2_SCAN_SIGN 0xf26d0030
-#define F0900_P2_TMG_SCANNING 0xf26d0008
-#define F0900_P2_CHCENTERING_MODE 0xf26d0004
-#define F0900_P2_TMG_SCANFAIL 0xf26d0002
+#define R0900_P2_TMGOBS 0xf26d
+#define F0900_P2_ROLLOFF_STATUS 0xf26d00c0
/*P2_EQUALCFG*/
-#define R0900_P2_EQUALCFG 0xf26f
-#define F0900_P2_NOTMG_NEGALWAIT 0xf26f0080
-#define F0900_P2_EQUAL_ON 0xf26f0040
-#define F0900_P2_SEL_EQUALCOR 0xf26f0038
-#define F0900_P2_MU_EQUALDFE 0xf26f0007
+#define R0900_P2_EQUALCFG 0xf26f
+#define F0900_P2_EQUAL_ON 0xf26f0040
+#define F0900_P2_MU_EQUALDFE 0xf26f0007
/*P2_EQUAI1*/
-#define R0900_P2_EQUAI1 0xf270
-#define F0900_P2_EQUA_ACCI1 0xf27001ff
+#define R0900_P2_EQUAI1 0xf270
+#define F0900_P2_EQUA_ACCI1 0xf27001ff
/*P2_EQUAQ1*/
-#define R0900_P2_EQUAQ1 0xf271
-#define F0900_P2_EQUA_ACCQ1 0xf27101ff
+#define R0900_P2_EQUAQ1 0xf271
+#define F0900_P2_EQUA_ACCQ1 0xf27101ff
/*P2_EQUAI2*/
-#define R0900_P2_EQUAI2 0xf272
-#define F0900_P2_EQUA_ACCI2 0xf27201ff
+#define R0900_P2_EQUAI2 0xf272
+#define F0900_P2_EQUA_ACCI2 0xf27201ff
/*P2_EQUAQ2*/
-#define R0900_P2_EQUAQ2 0xf273
-#define F0900_P2_EQUA_ACCQ2 0xf27301ff
+#define R0900_P2_EQUAQ2 0xf273
+#define F0900_P2_EQUA_ACCQ2 0xf27301ff
/*P2_EQUAI3*/
-#define R0900_P2_EQUAI3 0xf274
-#define F0900_P2_EQUA_ACCI3 0xf27401ff
+#define R0900_P2_EQUAI3 0xf274
+#define F0900_P2_EQUA_ACCI3 0xf27401ff
/*P2_EQUAQ3*/
-#define R0900_P2_EQUAQ3 0xf275
-#define F0900_P2_EQUA_ACCQ3 0xf27501ff
+#define R0900_P2_EQUAQ3 0xf275
+#define F0900_P2_EQUA_ACCQ3 0xf27501ff
/*P2_EQUAI4*/
-#define R0900_P2_EQUAI4 0xf276
-#define F0900_P2_EQUA_ACCI4 0xf27601ff
+#define R0900_P2_EQUAI4 0xf276
+#define F0900_P2_EQUA_ACCI4 0xf27601ff
/*P2_EQUAQ4*/
-#define R0900_P2_EQUAQ4 0xf277
-#define F0900_P2_EQUA_ACCQ4 0xf27701ff
+#define R0900_P2_EQUAQ4 0xf277
+#define F0900_P2_EQUA_ACCQ4 0xf27701ff
/*P2_EQUAI5*/
-#define R0900_P2_EQUAI5 0xf278
-#define F0900_P2_EQUA_ACCI5 0xf27801ff
+#define R0900_P2_EQUAI5 0xf278
+#define F0900_P2_EQUA_ACCI5 0xf27801ff
/*P2_EQUAQ5*/
-#define R0900_P2_EQUAQ5 0xf279
-#define F0900_P2_EQUA_ACCQ5 0xf27901ff
+#define R0900_P2_EQUAQ5 0xf279
+#define F0900_P2_EQUA_ACCQ5 0xf27901ff
/*P2_EQUAI6*/
-#define R0900_P2_EQUAI6 0xf27a
-#define F0900_P2_EQUA_ACCI6 0xf27a01ff
+#define R0900_P2_EQUAI6 0xf27a
+#define F0900_P2_EQUA_ACCI6 0xf27a01ff
/*P2_EQUAQ6*/
-#define R0900_P2_EQUAQ6 0xf27b
-#define F0900_P2_EQUA_ACCQ6 0xf27b01ff
+#define R0900_P2_EQUAQ6 0xf27b
+#define F0900_P2_EQUA_ACCQ6 0xf27b01ff
/*P2_EQUAI7*/
-#define R0900_P2_EQUAI7 0xf27c
-#define F0900_P2_EQUA_ACCI7 0xf27c01ff
+#define R0900_P2_EQUAI7 0xf27c
+#define F0900_P2_EQUA_ACCI7 0xf27c01ff
/*P2_EQUAQ7*/
-#define R0900_P2_EQUAQ7 0xf27d
-#define F0900_P2_EQUA_ACCQ7 0xf27d01ff
+#define R0900_P2_EQUAQ7 0xf27d
+#define F0900_P2_EQUA_ACCQ7 0xf27d01ff
/*P2_EQUAI8*/
-#define R0900_P2_EQUAI8 0xf27e
-#define F0900_P2_EQUA_ACCI8 0xf27e01ff
+#define R0900_P2_EQUAI8 0xf27e
+#define F0900_P2_EQUA_ACCI8 0xf27e01ff
/*P2_EQUAQ8*/
-#define R0900_P2_EQUAQ8 0xf27f
-#define F0900_P2_EQUA_ACCQ8 0xf27f01ff
+#define R0900_P2_EQUAQ8 0xf27f
+#define F0900_P2_EQUA_ACCQ8 0xf27f01ff
/*P2_NNOSDATAT1*/
-#define R0900_P2_NNOSDATAT1 0xf280
-#define F0900_P2_NOSDATAT_NORMED1 0xf28000ff
+#define R0900_P2_NNOSDATAT1 0xf280
+#define F0900_P2_NOSDATAT_NORMED1 0xf28000ff
/*P2_NNOSDATAT0*/
-#define R0900_P2_NNOSDATAT0 0xf281
-#define F0900_P2_NOSDATAT_NORMED0 0xf28100ff
+#define R0900_P2_NNOSDATAT0 0xf281
+#define F0900_P2_NOSDATAT_NORMED0 0xf28100ff
/*P2_NNOSDATA1*/
-#define R0900_P2_NNOSDATA1 0xf282
-#define F0900_P2_NOSDATA_NORMED1 0xf28200ff
+#define R0900_P2_NNOSDATA1 0xf282
+#define F0900_P2_NOSDATA_NORMED1 0xf28200ff
/*P2_NNOSDATA0*/
-#define R0900_P2_NNOSDATA0 0xf283
-#define F0900_P2_NOSDATA_NORMED0 0xf28300ff
+#define R0900_P2_NNOSDATA0 0xf283
+#define F0900_P2_NOSDATA_NORMED0 0xf28300ff
/*P2_NNOSPLHT1*/
-#define R0900_P2_NNOSPLHT1 0xf284
-#define F0900_P2_NOSPLHT_NORMED1 0xf28400ff
+#define R0900_P2_NNOSPLHT1 0xf284
+#define F0900_P2_NOSPLHT_NORMED1 0xf28400ff
/*P2_NNOSPLHT0*/
-#define R0900_P2_NNOSPLHT0 0xf285
-#define F0900_P2_NOSPLHT_NORMED0 0xf28500ff
+#define R0900_P2_NNOSPLHT0 0xf285
+#define F0900_P2_NOSPLHT_NORMED0 0xf28500ff
/*P2_NNOSPLH1*/
-#define R0900_P2_NNOSPLH1 0xf286
-#define F0900_P2_NOSPLH_NORMED1 0xf28600ff
+#define R0900_P2_NNOSPLH1 0xf286
+#define F0900_P2_NOSPLH_NORMED1 0xf28600ff
/*P2_NNOSPLH0*/
-#define R0900_P2_NNOSPLH0 0xf287
-#define F0900_P2_NOSPLH_NORMED0 0xf28700ff
+#define R0900_P2_NNOSPLH0 0xf287
+#define F0900_P2_NOSPLH_NORMED0 0xf28700ff
/*P2_NOSDATAT1*/
-#define R0900_P2_NOSDATAT1 0xf288
-#define F0900_P2_NOSDATAT_UNNORMED1 0xf28800ff
+#define R0900_P2_NOSDATAT1 0xf288
+#define F0900_P2_NOSDATAT_UNNORMED1 0xf28800ff
/*P2_NOSDATAT0*/
-#define R0900_P2_NOSDATAT0 0xf289
-#define F0900_P2_NOSDATAT_UNNORMED0 0xf28900ff
+#define R0900_P2_NOSDATAT0 0xf289
+#define F0900_P2_NOSDATAT_UNNORMED0 0xf28900ff
/*P2_NOSDATA1*/
-#define R0900_P2_NOSDATA1 0xf28a
-#define F0900_P2_NOSDATA_UNNORMED1 0xf28a00ff
+#define R0900_P2_NOSDATA1 0xf28a
+#define F0900_P2_NOSDATA_UNNORMED1 0xf28a00ff
/*P2_NOSDATA0*/
-#define R0900_P2_NOSDATA0 0xf28b
-#define F0900_P2_NOSDATA_UNNORMED0 0xf28b00ff
+#define R0900_P2_NOSDATA0 0xf28b
+#define F0900_P2_NOSDATA_UNNORMED0 0xf28b00ff
/*P2_NOSPLHT1*/
-#define R0900_P2_NOSPLHT1 0xf28c
-#define F0900_P2_NOSPLHT_UNNORMED1 0xf28c00ff
+#define R0900_P2_NOSPLHT1 0xf28c
+#define F0900_P2_NOSPLHT_UNNORMED1 0xf28c00ff
/*P2_NOSPLHT0*/
-#define R0900_P2_NOSPLHT0 0xf28d
-#define F0900_P2_NOSPLHT_UNNORMED0 0xf28d00ff
+#define R0900_P2_NOSPLHT0 0xf28d
+#define F0900_P2_NOSPLHT_UNNORMED0 0xf28d00ff
/*P2_NOSPLH1*/
-#define R0900_P2_NOSPLH1 0xf28e
-#define F0900_P2_NOSPLH_UNNORMED1 0xf28e00ff
+#define R0900_P2_NOSPLH1 0xf28e
+#define F0900_P2_NOSPLH_UNNORMED1 0xf28e00ff
/*P2_NOSPLH0*/
-#define R0900_P2_NOSPLH0 0xf28f
-#define F0900_P2_NOSPLH_UNNORMED0 0xf28f00ff
+#define R0900_P2_NOSPLH0 0xf28f
+#define F0900_P2_NOSPLH_UNNORMED0 0xf28f00ff
/*P2_CAR2CFG*/
-#define R0900_P2_CAR2CFG 0xf290
-#define F0900_P2_DESCRAMB_OFF 0xf2900080
-#define F0900_P2_PN4_SELECT 0xf2900040
-#define F0900_P2_CFR2_STOPDVBS1 0xf2900020
-#define F0900_P2_STOP_CFR2UPDATE 0xf2900010
-#define F0900_P2_STOP_NCO2UPDATE 0xf2900008
-#define F0900_P2_ROTA2ON 0xf2900004
-#define F0900_P2_PH_DET_ALGO2 0xf2900003
+#define R0900_P2_CAR2CFG 0xf290
+#define F0900_P2_CARRIER3_DISABLE 0xf2900040
+#define F0900_P2_ROTA2ON 0xf2900004
+#define F0900_P2_PH_DET_ALGO2 0xf2900003
-/*P2_ACLC2*/
-#define R0900_P2_ACLC2 0xf291
-#define F0900_P2_CAR2_PUNCT_ADERAT 0xf2910040
-#define F0900_P2_CAR2_ALPHA_MANT 0xf2910030
-#define F0900_P2_CAR2_ALPHA_EXP 0xf291000f
-
-/*P2_BCLC2*/
-#define R0900_P2_BCLC2 0xf292
-#define F0900_P2_DVBS2_NIP 0xf2920080
-#define F0900_P2_CAR2_PUNCT_BDERAT 0xf2920040
-#define F0900_P2_CAR2_BETA_MANT 0xf2920030
-#define F0900_P2_CAR2_BETA_EXP 0xf292000f
+/*P2_CFR2CFR1*/
+#define R0900_P2_CFR2CFR1 0xf291
+#define F0900_P2_CFR2TOCFR1_DVBS1 0xf29100c0
+#define F0900_P2_EN_S2CAR2CENTER 0xf2910020
+#define F0900_P2_DIS_BCHERRCFR2 0xf2910010
+#define F0900_P2_CFR2TOCFR1_BETA 0xf2910007
/*P2_CFR22*/
-#define R0900_P2_CFR22 0xf293
-#define F0900_P2_CAR2_FREQ2 0xf29301ff
+#define R0900_P2_CFR22 0xf293
+#define F0900_P2_CAR2_FREQ2 0xf29301ff
/*P2_CFR21*/
-#define R0900_P2_CFR21 0xf294
-#define F0900_P2_CAR2_FREQ1 0xf29400ff
+#define R0900_P2_CFR21 0xf294
+#define F0900_P2_CAR2_FREQ1 0xf29400ff
/*P2_CFR20*/
-#define R0900_P2_CFR20 0xf295
-#define F0900_P2_CAR2_FREQ0 0xf29500ff
+#define R0900_P2_CFR20 0xf295
+#define F0900_P2_CAR2_FREQ0 0xf29500ff
/*P2_ACLC2S2Q*/
-#define R0900_P2_ACLC2S2Q 0xf297
-#define F0900_P2_ENAB_SPSKSYMB 0xf2970080
-#define F0900_P2_CAR2S2_QADERAT 0xf2970040
-#define F0900_P2_CAR2S2_Q_ALPH_M 0xf2970030
-#define F0900_P2_CAR2S2_Q_ALPH_E 0xf297000f
+#define R0900_P2_ACLC2S2Q 0xf297
+#define F0900_P2_ENAB_SPSKSYMB 0xf2970080
+#define F0900_P2_CAR2S2_Q_ALPH_M 0xf2970030
+#define F0900_P2_CAR2S2_Q_ALPH_E 0xf297000f
/*P2_ACLC2S28*/
-#define R0900_P2_ACLC2S28 0xf298
-#define F0900_P2_OLDI3Q_MODE 0xf2980080
-#define F0900_P2_CAR2S2_8ADERAT 0xf2980040
-#define F0900_P2_CAR2S2_8_ALPH_M 0xf2980030
-#define F0900_P2_CAR2S2_8_ALPH_E 0xf298000f
+#define R0900_P2_ACLC2S28 0xf298
+#define F0900_P2_OLDI3Q_MODE 0xf2980080
+#define F0900_P2_CAR2S2_8_ALPH_M 0xf2980030
+#define F0900_P2_CAR2S2_8_ALPH_E 0xf298000f
/*P2_ACLC2S216A*/
-#define R0900_P2_ACLC2S216A 0xf299
-#define F0900_P2_CAR2S2_16ADERAT 0xf2990040
-#define F0900_P2_CAR2S2_16A_ALPH_M 0xf2990030
-#define F0900_P2_CAR2S2_16A_ALPH_E 0xf299000f
+#define R0900_P2_ACLC2S216A 0xf299
+#define F0900_P2_DIS_C3STOPA2 0xf2990080
+#define F0900_P2_CAR2S2_16ADERAT 0xf2990040
+#define F0900_P2_CAR2S2_16A_ALPH_M 0xf2990030
+#define F0900_P2_CAR2S2_16A_ALPH_E 0xf299000f
/*P2_ACLC2S232A*/
-#define R0900_P2_ACLC2S232A 0xf29a
-#define F0900_P2_CAR2S2_32ADERAT 0xf29a0040
-#define F0900_P2_CAR2S2_32A_ALPH_M 0xf29a0030
-#define F0900_P2_CAR2S2_32A_ALPH_E 0xf29a000f
+#define R0900_P2_ACLC2S232A 0xf29a
+#define F0900_P2_CAR2S2_32ADERAT 0xf29a0040
+#define F0900_P2_CAR2S2_32A_ALPH_M 0xf29a0030
+#define F0900_P2_CAR2S2_32A_ALPH_E 0xf29a000f
/*P2_BCLC2S2Q*/
-#define R0900_P2_BCLC2S2Q 0xf29c
-#define F0900_P2_DVBS2S2Q_NIP 0xf29c0080
-#define F0900_P2_CAR2S2_QBDERAT 0xf29c0040
-#define F0900_P2_CAR2S2_Q_BETA_M 0xf29c0030
-#define F0900_P2_CAR2S2_Q_BETA_E 0xf29c000f
+#define R0900_P2_BCLC2S2Q 0xf29c
+#define F0900_P2_CAR2S2_Q_BETA_M 0xf29c0030
+#define F0900_P2_CAR2S2_Q_BETA_E 0xf29c000f
/*P2_BCLC2S28*/
-#define R0900_P2_BCLC2S28 0xf29d
-#define F0900_P2_DVBS2S28_NIP 0xf29d0080
-#define F0900_P2_CAR2S2_8BDERAT 0xf29d0040
-#define F0900_P2_CAR2S2_8_BETA_M 0xf29d0030
-#define F0900_P2_CAR2S2_8_BETA_E 0xf29d000f
+#define R0900_P2_BCLC2S28 0xf29d
+#define F0900_P2_CAR2S2_8_BETA_M 0xf29d0030
+#define F0900_P2_CAR2S2_8_BETA_E 0xf29d000f
/*P2_BCLC2S216A*/
-#define R0900_P2_BCLC2S216A 0xf29e
-#define F0900_P2_DVBS2S216A_NIP 0xf29e0080
-#define F0900_P2_CAR2S2_16BDERAT 0xf29e0040
-#define F0900_P2_CAR2S2_16A_BETA_M 0xf29e0030
-#define F0900_P2_CAR2S2_16A_BETA_E 0xf29e000f
+#define R0900_P2_BCLC2S216A 0xf29e
/*P2_BCLC2S232A*/
-#define R0900_P2_BCLC2S232A 0xf29f
-#define F0900_P2_DVBS2S232A_NIP 0xf29f0080
-#define F0900_P2_CAR2S2_32BDERAT 0xf29f0040
-#define F0900_P2_CAR2S2_32A_BETA_M 0xf29f0030
-#define F0900_P2_CAR2S2_32A_BETA_E 0xf29f000f
+#define R0900_P2_BCLC2S232A 0xf29f
/*P2_PLROOT2*/
-#define R0900_P2_PLROOT2 0xf2ac
-#define F0900_P2_SHORTFR_DISABLE 0xf2ac0080
-#define F0900_P2_LONGFR_DISABLE 0xf2ac0040
-#define F0900_P2_DUMMYPL_DISABLE 0xf2ac0020
-#define F0900_P2_SHORTFR_AVOID 0xf2ac0010
-#define F0900_P2_PLSCRAMB_MODE 0xf2ac000c
-#define F0900_P2_PLSCRAMB_ROOT2 0xf2ac0003
+#define R0900_P2_PLROOT2 0xf2ac
+#define F0900_P2_PLSCRAMB_MODE 0xf2ac000c
+#define F0900_P2_PLSCRAMB_ROOT2 0xf2ac0003
/*P2_PLROOT1*/
-#define R0900_P2_PLROOT1 0xf2ad
-#define F0900_P2_PLSCRAMB_ROOT1 0xf2ad00ff
+#define R0900_P2_PLROOT1 0xf2ad
+#define F0900_P2_PLSCRAMB_ROOT1 0xf2ad00ff
/*P2_PLROOT0*/
-#define R0900_P2_PLROOT0 0xf2ae
-#define F0900_P2_PLSCRAMB_ROOT0 0xf2ae00ff
+#define R0900_P2_PLROOT0 0xf2ae
+#define F0900_P2_PLSCRAMB_ROOT0 0xf2ae00ff
/*P2_MODCODLST0*/
-#define R0900_P2_MODCODLST0 0xf2b0
-#define F0900_P2_EN_TOKEN31 0xf2b00080
-#define F0900_P2_SYNCTAG_SELECT 0xf2b00040
-#define F0900_P2_MODCODRQ_MODE 0xf2b00030
+#define R0900_P2_MODCODLST0 0xf2b0
/*P2_MODCODLST1*/
-#define R0900_P2_MODCODLST1 0xf2b1
-#define F0900_P2_DIS_MODCOD29 0xf2b100f0
-#define F0900_P2_DIS_32PSK_9_10 0xf2b1000f
+#define R0900_P2_MODCODLST1 0xf2b1
+#define F0900_P2_DIS_MODCOD29 0xf2b100f0
+#define F0900_P2_DIS_32PSK_9_10 0xf2b1000f
/*P2_MODCODLST2*/
-#define R0900_P2_MODCODLST2 0xf2b2
-#define F0900_P2_DIS_32PSK_8_9 0xf2b200f0
-#define F0900_P2_DIS_32PSK_5_6 0xf2b2000f
+#define R0900_P2_MODCODLST2 0xf2b2
+#define F0900_P2_DIS_32PSK_8_9 0xf2b200f0
+#define F0900_P2_DIS_32PSK_5_6 0xf2b2000f
/*P2_MODCODLST3*/
-#define R0900_P2_MODCODLST3 0xf2b3
-#define F0900_P2_DIS_32PSK_4_5 0xf2b300f0
-#define F0900_P2_DIS_32PSK_3_4 0xf2b3000f
+#define R0900_P2_MODCODLST3 0xf2b3
+#define F0900_P2_DIS_32PSK_4_5 0xf2b300f0
+#define F0900_P2_DIS_32PSK_3_4 0xf2b3000f
/*P2_MODCODLST4*/
-#define R0900_P2_MODCODLST4 0xf2b4
-#define F0900_P2_DIS_16PSK_9_10 0xf2b400f0
-#define F0900_P2_DIS_16PSK_8_9 0xf2b4000f
+#define R0900_P2_MODCODLST4 0xf2b4
+#define F0900_P2_DIS_16PSK_9_10 0xf2b400f0
+#define F0900_P2_DIS_16PSK_8_9 0xf2b4000f
/*P2_MODCODLST5*/
-#define R0900_P2_MODCODLST5 0xf2b5
-#define F0900_P2_DIS_16PSK_5_6 0xf2b500f0
-#define F0900_P2_DIS_16PSK_4_5 0xf2b5000f
+#define R0900_P2_MODCODLST5 0xf2b5
+#define F0900_P2_DIS_16PSK_5_6 0xf2b500f0
+#define F0900_P2_DIS_16PSK_4_5 0xf2b5000f
/*P2_MODCODLST6*/
-#define R0900_P2_MODCODLST6 0xf2b6
-#define F0900_P2_DIS_16PSK_3_4 0xf2b600f0
-#define F0900_P2_DIS_16PSK_2_3 0xf2b6000f
+#define R0900_P2_MODCODLST6 0xf2b6
+#define F0900_P2_DIS_16PSK_3_4 0xf2b600f0
+#define F0900_P2_DIS_16PSK_2_3 0xf2b6000f
/*P2_MODCODLST7*/
-#define R0900_P2_MODCODLST7 0xf2b7
-#define F0900_P2_DIS_8P_9_10 0xf2b700f0
-#define F0900_P2_DIS_8P_8_9 0xf2b7000f
+#define R0900_P2_MODCODLST7 0xf2b7
+#define F0900_P2_DIS_8P_9_10 0xf2b700f0
+#define F0900_P2_DIS_8P_8_9 0xf2b7000f
/*P2_MODCODLST8*/
-#define R0900_P2_MODCODLST8 0xf2b8
-#define F0900_P2_DIS_8P_5_6 0xf2b800f0
-#define F0900_P2_DIS_8P_3_4 0xf2b8000f
+#define R0900_P2_MODCODLST8 0xf2b8
+#define F0900_P2_DIS_8P_5_6 0xf2b800f0
+#define F0900_P2_DIS_8P_3_4 0xf2b8000f
/*P2_MODCODLST9*/
-#define R0900_P2_MODCODLST9 0xf2b9
-#define F0900_P2_DIS_8P_2_3 0xf2b900f0
-#define F0900_P2_DIS_8P_3_5 0xf2b9000f
+#define R0900_P2_MODCODLST9 0xf2b9
+#define F0900_P2_DIS_8P_2_3 0xf2b900f0
+#define F0900_P2_DIS_8P_3_5 0xf2b9000f
/*P2_MODCODLSTA*/
-#define R0900_P2_MODCODLSTA 0xf2ba
-#define F0900_P2_DIS_QP_9_10 0xf2ba00f0
-#define F0900_P2_DIS_QP_8_9 0xf2ba000f
+#define R0900_P2_MODCODLSTA 0xf2ba
+#define F0900_P2_DIS_QP_9_10 0xf2ba00f0
+#define F0900_P2_DIS_QP_8_9 0xf2ba000f
/*P2_MODCODLSTB*/
-#define R0900_P2_MODCODLSTB 0xf2bb
-#define F0900_P2_DIS_QP_5_6 0xf2bb00f0
-#define F0900_P2_DIS_QP_4_5 0xf2bb000f
+#define R0900_P2_MODCODLSTB 0xf2bb
+#define F0900_P2_DIS_QP_5_6 0xf2bb00f0
+#define F0900_P2_DIS_QP_4_5 0xf2bb000f
/*P2_MODCODLSTC*/
-#define R0900_P2_MODCODLSTC 0xf2bc
-#define F0900_P2_DIS_QP_3_4 0xf2bc00f0
-#define F0900_P2_DIS_QP_2_3 0xf2bc000f
+#define R0900_P2_MODCODLSTC 0xf2bc
+#define F0900_P2_DIS_QP_3_4 0xf2bc00f0
+#define F0900_P2_DIS_QP_2_3 0xf2bc000f
/*P2_MODCODLSTD*/
-#define R0900_P2_MODCODLSTD 0xf2bd
-#define F0900_P2_DIS_QP_3_5 0xf2bd00f0
-#define F0900_P2_DIS_QP_1_2 0xf2bd000f
+#define R0900_P2_MODCODLSTD 0xf2bd
+#define F0900_P2_DIS_QP_3_5 0xf2bd00f0
+#define F0900_P2_DIS_QP_1_2 0xf2bd000f
/*P2_MODCODLSTE*/
-#define R0900_P2_MODCODLSTE 0xf2be
-#define F0900_P2_DIS_QP_2_5 0xf2be00f0
-#define F0900_P2_DIS_QP_1_3 0xf2be000f
+#define R0900_P2_MODCODLSTE 0xf2be
+#define F0900_P2_DIS_QP_2_5 0xf2be00f0
+#define F0900_P2_DIS_QP_1_3 0xf2be000f
/*P2_MODCODLSTF*/
-#define R0900_P2_MODCODLSTF 0xf2bf
-#define F0900_P2_DIS_QP_1_4 0xf2bf00f0
-#define F0900_P2_DDEMOD_SET 0xf2bf0002
-#define F0900_P2_DDEMOD_MASK 0xf2bf0001
+#define R0900_P2_MODCODLSTF 0xf2bf
+#define F0900_P2_DIS_QP_1_4 0xf2bf00f0
+
+/*P2_GAUSSR0*/
+#define R0900_P2_GAUSSR0 0xf2c0
+#define F0900_P2_EN_CCIMODE 0xf2c00080
+#define F0900_P2_R0_GAUSSIEN 0xf2c0007f
+
+/*P2_CCIR0*/
+#define R0900_P2_CCIR0 0xf2c1
+#define F0900_P2_CCIDETECT_PLHONLY 0xf2c10080
+#define F0900_P2_R0_CCI 0xf2c1007f
+
+/*P2_CCIQUANT*/
+#define R0900_P2_CCIQUANT 0xf2c2
+#define F0900_P2_CCI_BETA 0xf2c200e0
+#define F0900_P2_CCI_QUANT 0xf2c2001f
+
+/*P2_CCITHRES*/
+#define R0900_P2_CCITHRES 0xf2c3
+#define F0900_P2_CCI_THRESHOLD 0xf2c300ff
+
+/*P2_CCIACC*/
+#define R0900_P2_CCIACC 0xf2c4
+#define F0900_P2_CCI_VALUE 0xf2c400ff
/*P2_DMDRESCFG*/
-#define R0900_P2_DMDRESCFG 0xf2c6
-#define F0900_P2_DMDRES_RESET 0xf2c60080
-#define F0900_P2_DMDRES_NOISESQR 0xf2c60010
-#define F0900_P2_DMDRES_STRALL 0xf2c60008
-#define F0900_P2_DMDRES_NEWONLY 0xf2c60004
-#define F0900_P2_DMDRES_NOSTORE 0xf2c60002
-#define F0900_P2_DMDRES_AGC2MEM 0xf2c60001
+#define R0900_P2_DMDRESCFG 0xf2c6
+#define F0900_P2_DMDRES_RESET 0xf2c60080
+#define F0900_P2_DMDRES_STRALL 0xf2c60008
+#define F0900_P2_DMDRES_NEWONLY 0xf2c60004
+#define F0900_P2_DMDRES_NOSTORE 0xf2c60002
/*P2_DMDRESADR*/
-#define R0900_P2_DMDRESADR 0xf2c7
-#define F0900_P2_SUSP_PREDCANAL 0xf2c70080
-#define F0900_P2_DMDRES_VALIDCFR 0xf2c70040
-#define F0900_P2_DMDRES_MEMFULL 0xf2c70030
-#define F0900_P2_DMDRES_RESNBR 0xf2c7000f
+#define R0900_P2_DMDRESADR 0xf2c7
+#define F0900_P2_DMDRES_VALIDCFR 0xf2c70040
+#define F0900_P2_DMDRES_MEMFULL 0xf2c70030
+#define F0900_P2_DMDRES_RESNBR 0xf2c7000f
/*P2_DMDRESDATA7*/
-#define R0900_P2_DMDRESDATA7 0xf2c8
-#define F0900_P2_DMDRES_DATA7 0xf2c800ff
+#define R0900_P2_DMDRESDATA7 0xf2c8
+#define F0900_P2_DMDRES_DATA7 0xf2c800ff
/*P2_DMDRESDATA6*/
-#define R0900_P2_DMDRESDATA6 0xf2c9
-#define F0900_P2_DMDRES_DATA6 0xf2c900ff
+#define R0900_P2_DMDRESDATA6 0xf2c9
+#define F0900_P2_DMDRES_DATA6 0xf2c900ff
/*P2_DMDRESDATA5*/
-#define R0900_P2_DMDRESDATA5 0xf2ca
-#define F0900_P2_DMDRES_DATA5 0xf2ca00ff
+#define R0900_P2_DMDRESDATA5 0xf2ca
+#define F0900_P2_DMDRES_DATA5 0xf2ca00ff
/*P2_DMDRESDATA4*/
-#define R0900_P2_DMDRESDATA4 0xf2cb
-#define F0900_P2_DMDRES_DATA4 0xf2cb00ff
+#define R0900_P2_DMDRESDATA4 0xf2cb
+#define F0900_P2_DMDRES_DATA4 0xf2cb00ff
/*P2_DMDRESDATA3*/
-#define R0900_P2_DMDRESDATA3 0xf2cc
-#define F0900_P2_DMDRES_DATA3 0xf2cc00ff
+#define R0900_P2_DMDRESDATA3 0xf2cc
+#define F0900_P2_DMDRES_DATA3 0xf2cc00ff
/*P2_DMDRESDATA2*/
-#define R0900_P2_DMDRESDATA2 0xf2cd
-#define F0900_P2_DMDRES_DATA2 0xf2cd00ff
+#define R0900_P2_DMDRESDATA2 0xf2cd
+#define F0900_P2_DMDRES_DATA2 0xf2cd00ff
/*P2_DMDRESDATA1*/
-#define R0900_P2_DMDRESDATA1 0xf2ce
-#define F0900_P2_DMDRES_DATA1 0xf2ce00ff
+#define R0900_P2_DMDRESDATA1 0xf2ce
+#define F0900_P2_DMDRES_DATA1 0xf2ce00ff
/*P2_DMDRESDATA0*/
-#define R0900_P2_DMDRESDATA0 0xf2cf
-#define F0900_P2_DMDRES_DATA0 0xf2cf00ff
+#define R0900_P2_DMDRESDATA0 0xf2cf
+#define F0900_P2_DMDRES_DATA0 0xf2cf00ff
/*P2_FFEI1*/
-#define R0900_P2_FFEI1 0xf2d0
-#define F0900_P2_FFE_ACCI1 0xf2d001ff
+#define R0900_P2_FFEI1 0xf2d0
+#define F0900_P2_FFE_ACCI1 0xf2d001ff
/*P2_FFEQ1*/
-#define R0900_P2_FFEQ1 0xf2d1
-#define F0900_P2_FFE_ACCQ1 0xf2d101ff
+#define R0900_P2_FFEQ1 0xf2d1
+#define F0900_P2_FFE_ACCQ1 0xf2d101ff
/*P2_FFEI2*/
-#define R0900_P2_FFEI2 0xf2d2
-#define F0900_P2_FFE_ACCI2 0xf2d201ff
+#define R0900_P2_FFEI2 0xf2d2
+#define F0900_P2_FFE_ACCI2 0xf2d201ff
/*P2_FFEQ2*/
-#define R0900_P2_FFEQ2 0xf2d3
-#define F0900_P2_FFE_ACCQ2 0xf2d301ff
+#define R0900_P2_FFEQ2 0xf2d3
+#define F0900_P2_FFE_ACCQ2 0xf2d301ff
/*P2_FFEI3*/
-#define R0900_P2_FFEI3 0xf2d4
-#define F0900_P2_FFE_ACCI3 0xf2d401ff
+#define R0900_P2_FFEI3 0xf2d4
+#define F0900_P2_FFE_ACCI3 0xf2d401ff
/*P2_FFEQ3*/
-#define R0900_P2_FFEQ3 0xf2d5
-#define F0900_P2_FFE_ACCQ3 0xf2d501ff
+#define R0900_P2_FFEQ3 0xf2d5
+#define F0900_P2_FFE_ACCQ3 0xf2d501ff
/*P2_FFEI4*/
-#define R0900_P2_FFEI4 0xf2d6
-#define F0900_P2_FFE_ACCI4 0xf2d601ff
+#define R0900_P2_FFEI4 0xf2d6
+#define F0900_P2_FFE_ACCI4 0xf2d601ff
/*P2_FFEQ4*/
-#define R0900_P2_FFEQ4 0xf2d7
-#define F0900_P2_FFE_ACCQ4 0xf2d701ff
+#define R0900_P2_FFEQ4 0xf2d7
+#define F0900_P2_FFE_ACCQ4 0xf2d701ff
/*P2_FFECFG*/
-#define R0900_P2_FFECFG 0xf2d8
-#define F0900_P2_EQUALFFE_ON 0xf2d80040
-#define F0900_P2_EQUAL_USEDSYMB 0xf2d80030
-#define F0900_P2_MU_EQUALFFE 0xf2d80007
+#define R0900_P2_FFECFG 0xf2d8
+#define F0900_P2_EQUALFFE_ON 0xf2d80040
+#define F0900_P2_MU_EQUALFFE 0xf2d80007
/*P2_TNRCFG*/
-#define R0900_P2_TNRCFG 0xf2e0
-#define F0900_P2_TUN_ACKFAIL 0xf2e00080
-#define F0900_P2_TUN_TYPE 0xf2e00070
-#define F0900_P2_TUN_SECSTOP 0xf2e00008
-#define F0900_P2_TUN_VCOSRCH 0xf2e00004
-#define F0900_P2_TUN_MADDRESS 0xf2e00003
+#define R0900_P2_TNRCFG 0xf2e0
+#define F0900_P2_TUN_ACKFAIL 0xf2e00080
+#define F0900_P2_TUN_TYPE 0xf2e00070
+#define F0900_P2_TUN_SECSTOP 0xf2e00008
+#define F0900_P2_TUN_VCOSRCH 0xf2e00004
+#define F0900_P2_TUN_MADDRESS 0xf2e00003
/*P2_TNRCFG2*/
-#define R0900_P2_TNRCFG2 0xf2e1
-#define F0900_P2_TUN_IQSWAP 0xf2e10080
-#define F0900_P2_STB6110_STEP2MHZ 0xf2e10040
-#define F0900_P2_STB6120_DBLI2C 0xf2e10020
-#define F0900_P2_DIS_FCCK 0xf2e10010
-#define F0900_P2_DIS_LPEN 0xf2e10008
-#define F0900_P2_DIS_BWCALC 0xf2e10004
-#define F0900_P2_SHORT_WAITSTATES 0xf2e10002
-#define F0900_P2_DIS_2BWAGC1 0xf2e10001
+#define R0900_P2_TNRCFG2 0xf2e1
+#define F0900_P2_TUN_IQSWAP 0xf2e10080
+#define F0900_P2_DIS_BWCALC 0xf2e10004
+#define F0900_P2_SHORT_WAITSTATES 0xf2e10002
/*P2_TNRXTAL*/
-#define R0900_P2_TNRXTAL 0xf2e4
-#define F0900_P2_TUN_MCLKDECIMAL 0xf2e400e0
-#define F0900_P2_TUN_XTALFREQ 0xf2e4001f
+#define R0900_P2_TNRXTAL 0xf2e4
+#define F0900_P2_TUN_XTALFREQ 0xf2e4001f
/*P2_TNRSTEPS*/
-#define R0900_P2_TNRSTEPS 0xf2e7
-#define F0900_P2_TUNER_BW1P6 0xf2e70080
-#define F0900_P2_BWINC_OFFSET 0xf2e70070
-#define F0900_P2_SOFTSTEP_RNG 0xf2e70008
-#define F0900_P2_TUN_BWOFFSET 0xf2e70107
+#define R0900_P2_TNRSTEPS 0xf2e7
+#define F0900_P2_TUNER_BW0P125 0xf2e70080
+#define F0900_P2_BWINC_OFFSET 0xf2e70170
+#define F0900_P2_SOFTSTEP_RNG 0xf2e70008
+#define F0900_P2_TUN_BWOFFSET 0xf2e70007
/*P2_TNRGAIN*/
-#define R0900_P2_TNRGAIN 0xf2e8
-#define F0900_P2_TUN_KDIVEN 0xf2e800c0
-#define F0900_P2_STB6X00_OCK 0xf2e80030
-#define F0900_P2_TUN_GAIN 0xf2e8000f
+#define R0900_P2_TNRGAIN 0xf2e8
+#define F0900_P2_TUN_KDIVEN 0xf2e800c0
+#define F0900_P2_STB6X00_OCK 0xf2e80030
+#define F0900_P2_TUN_GAIN 0xf2e8000f
/*P2_TNRRF1*/
-#define R0900_P2_TNRRF1 0xf2e9
-#define F0900_P2_TUN_RFFREQ2 0xf2e900ff
+#define R0900_P2_TNRRF1 0xf2e9
+#define F0900_P2_TUN_RFFREQ2 0xf2e900ff
/*P2_TNRRF0*/
-#define R0900_P2_TNRRF0 0xf2ea
-#define F0900_P2_TUN_RFFREQ1 0xf2ea00ff
+#define R0900_P2_TNRRF0 0xf2ea
+#define F0900_P2_TUN_RFFREQ1 0xf2ea00ff
/*P2_TNRBW*/
-#define R0900_P2_TNRBW 0xf2eb
-#define F0900_P2_TUN_RFFREQ0 0xf2eb00c0
-#define F0900_P2_TUN_BW 0xf2eb003f
+#define R0900_P2_TNRBW 0xf2eb
+#define F0900_P2_TUN_RFFREQ0 0xf2eb00c0
+#define F0900_P2_TUN_BW 0xf2eb003f
/*P2_TNRADJ*/
-#define R0900_P2_TNRADJ 0xf2ec
-#define F0900_P2_STB61X0_RCLK 0xf2ec0080
-#define F0900_P2_STB61X0_CALTIME 0xf2ec0040
-#define F0900_P2_STB6X00_DLB 0xf2ec0038
-#define F0900_P2_STB6000_FCL 0xf2ec0007
+#define R0900_P2_TNRADJ 0xf2ec
+#define F0900_P2_STB61X0_CALTIME 0xf2ec0040
/*P2_TNRCTL2*/
-#define R0900_P2_TNRCTL2 0xf2ed
-#define F0900_P2_STB61X0_LCP1_RCCKOFF 0xf2ed0080
-#define F0900_P2_STB61X0_LCP0 0xf2ed0040
-#define F0900_P2_STB61X0_XTOUT_RFOUTS 0xf2ed0020
-#define F0900_P2_STB61X0_XTON_MCKDV 0xf2ed0010
-#define F0900_P2_STB61X0_CALOFF_DCOFF 0xf2ed0008
-#define F0900_P2_STB6110_LPT 0xf2ed0004
-#define F0900_P2_STB6110_RX 0xf2ed0002
-#define F0900_P2_STB6110_SYN 0xf2ed0001
+#define R0900_P2_TNRCTL2 0xf2ed
+#define F0900_P2_STB61X0_RCCKOFF 0xf2ed0080
+#define F0900_P2_STB61X0_ICP_SDOFF 0xf2ed0040
+#define F0900_P2_STB61X0_DCLOOPOFF 0xf2ed0020
+#define F0900_P2_STB61X0_REFOUTSEL 0xf2ed0010
+#define F0900_P2_STB61X0_CALOFF 0xf2ed0008
+#define F0900_P2_STB6XX0_LPT_BEN 0xf2ed0004
+#define F0900_P2_STB6XX0_RX_OSCP 0xf2ed0002
+#define F0900_P2_STB6XX0_SYN 0xf2ed0001
/*P2_TNRCFG3*/
-#define R0900_P2_TNRCFG3 0xf2ee
-#define F0900_P2_STB6120_DISCTRL1 0xf2ee0080
-#define F0900_P2_STB6120_INVORDER 0xf2ee0040
-#define F0900_P2_STB6120_ENCTRL6 0xf2ee0020
-#define F0900_P2_TUN_PLLFREQ 0xf2ee001c
-#define F0900_P2_TUN_I2CFREQ_MODE 0xf2ee0003
+#define R0900_P2_TNRCFG3 0xf2ee
+#define F0900_P2_TUN_PLLFREQ 0xf2ee001c
+#define F0900_P2_TUN_I2CFREQ_MODE 0xf2ee0003
/*P2_TNRLAUNCH*/
-#define R0900_P2_TNRLAUNCH 0xf2f0
+#define R0900_P2_TNRLAUNCH 0xf2f0
/*P2_TNRLD*/
-#define R0900_P2_TNRLD 0xf2f0
-#define F0900_P2_TUNLD_VCOING 0xf2f00080
-#define F0900_P2_TUN_REG1FAIL 0xf2f00040
-#define F0900_P2_TUN_REG2FAIL 0xf2f00020
-#define F0900_P2_TUN_REG3FAIL 0xf2f00010
-#define F0900_P2_TUN_REG4FAIL 0xf2f00008
-#define F0900_P2_TUN_REG5FAIL 0xf2f00004
-#define F0900_P2_TUN_BWING 0xf2f00002
-#define F0900_P2_TUN_LOCKED 0xf2f00001
+#define R0900_P2_TNRLD 0xf2f0
+#define F0900_P2_TUNLD_VCOING 0xf2f00080
+#define F0900_P2_TUN_REG1FAIL 0xf2f00040
+#define F0900_P2_TUN_REG2FAIL 0xf2f00020
+#define F0900_P2_TUN_REG3FAIL 0xf2f00010
+#define F0900_P2_TUN_REG4FAIL 0xf2f00008
+#define F0900_P2_TUN_REG5FAIL 0xf2f00004
+#define F0900_P2_TUN_BWING 0xf2f00002
+#define F0900_P2_TUN_LOCKED 0xf2f00001
/*P2_TNROBSL*/
-#define R0900_P2_TNROBSL 0xf2f6
-#define F0900_P2_TUN_I2CABORTED 0xf2f60080
-#define F0900_P2_TUN_LPEN 0xf2f60040
-#define F0900_P2_TUN_FCCK 0xf2f60020
-#define F0900_P2_TUN_I2CLOCKED 0xf2f60010
-#define F0900_P2_TUN_PROGDONE 0xf2f6000c
-#define F0900_P2_TUN_RFRESTE1 0xf2f60003
+#define R0900_P2_TNROBSL 0xf2f6
+#define F0900_P2_TUN_I2CABORTED 0xf2f60080
+#define F0900_P2_TUN_LPEN 0xf2f60040
+#define F0900_P2_TUN_FCCK 0xf2f60020
+#define F0900_P2_TUN_I2CLOCKED 0xf2f60010
+#define F0900_P2_TUN_PROGDONE 0xf2f6000c
+#define F0900_P2_TUN_RFRESTE1 0xf2f60003
/*P2_TNRRESTE*/
-#define R0900_P2_TNRRESTE 0xf2f7
-#define F0900_P2_TUN_RFRESTE0 0xf2f700ff
+#define R0900_P2_TNRRESTE 0xf2f7
+#define F0900_P2_TUN_RFRESTE0 0xf2f700ff
/*P2_SMAPCOEF7*/
-#define R0900_P2_SMAPCOEF7 0xf300
-#define F0900_P2_DIS_QSCALE 0xf3000080
-#define F0900_P2_SMAPCOEF_Q_LLR12 0xf300017f
+#define R0900_P2_SMAPCOEF7 0xf300
+#define F0900_P2_DIS_QSCALE 0xf3000080
+#define F0900_P2_SMAPCOEF_Q_LLR12 0xf300017f
/*P2_SMAPCOEF6*/
-#define R0900_P2_SMAPCOEF6 0xf301
-#define F0900_P2_DIS_NEWSCALE 0xf3010008
-#define F0900_P2_ADJ_8PSKLLR1 0xf3010004
-#define F0900_P2_OLD_8PSKLLR1 0xf3010002
-#define F0900_P2_DIS_AB8PSK 0xf3010001
+#define R0900_P2_SMAPCOEF6 0xf301
+#define F0900_P2_ADJ_8PSKLLR1 0xf3010004
+#define F0900_P2_OLD_8PSKLLR1 0xf3010002
+#define F0900_P2_DIS_AB8PSK 0xf3010001
/*P2_SMAPCOEF5*/
-#define R0900_P2_SMAPCOEF5 0xf302
-#define F0900_P2_DIS_8SCALE 0xf3020080
-#define F0900_P2_SMAPCOEF_8P_LLR23 0xf302017f
+#define R0900_P2_SMAPCOEF5 0xf302
+#define F0900_P2_DIS_8SCALE 0xf3020080
+#define F0900_P2_SMAPCOEF_8P_LLR23 0xf302017f
+
+/*P2_NCO2MAX1*/
+#define R0900_P2_NCO2MAX1 0xf314
+#define F0900_P2_TETA2_MAXVABS1 0xf31400ff
+
+/*P2_NCO2MAX0*/
+#define R0900_P2_NCO2MAX0 0xf315
+#define F0900_P2_TETA2_MAXVABS0 0xf31500ff
+
+/*P2_NCO2FR1*/
+#define R0900_P2_NCO2FR1 0xf316
+#define F0900_P2_NCO2FINAL_ANGLE1 0xf31600ff
+
+/*P2_NCO2FR0*/
+#define R0900_P2_NCO2FR0 0xf317
+#define F0900_P2_NCO2FINAL_ANGLE0 0xf31700ff
+
+/*P2_CFR2AVRGE1*/
+#define R0900_P2_CFR2AVRGE1 0xf318
+#define F0900_P2_I2C_CFR2AVERAGE1 0xf31800ff
+
+/*P2_CFR2AVRGE0*/
+#define R0900_P2_CFR2AVRGE0 0xf319
+#define F0900_P2_I2C_CFR2AVERAGE0 0xf31900ff
/*P2_DMDPLHSTAT*/
-#define R0900_P2_DMDPLHSTAT 0xf320
-#define F0900_P2_PLH_STATISTIC 0xf32000ff
+#define R0900_P2_DMDPLHSTAT 0xf320
+#define F0900_P2_PLH_STATISTIC 0xf32000ff
/*P2_LOCKTIME3*/
-#define R0900_P2_LOCKTIME3 0xf322
-#define F0900_P2_DEMOD_LOCKTIME3 0xf32200ff
+#define R0900_P2_LOCKTIME3 0xf322
+#define F0900_P2_DEMOD_LOCKTIME3 0xf32200ff
/*P2_LOCKTIME2*/
-#define R0900_P2_LOCKTIME2 0xf323
-#define F0900_P2_DEMOD_LOCKTIME2 0xf32300ff
+#define R0900_P2_LOCKTIME2 0xf323
+#define F0900_P2_DEMOD_LOCKTIME2 0xf32300ff
/*P2_LOCKTIME1*/
-#define R0900_P2_LOCKTIME1 0xf324
-#define F0900_P2_DEMOD_LOCKTIME1 0xf32400ff
+#define R0900_P2_LOCKTIME1 0xf324
+#define F0900_P2_DEMOD_LOCKTIME1 0xf32400ff
/*P2_LOCKTIME0*/
-#define R0900_P2_LOCKTIME0 0xf325
-#define F0900_P2_DEMOD_LOCKTIME0 0xf32500ff
+#define R0900_P2_LOCKTIME0 0xf325
+#define F0900_P2_DEMOD_LOCKTIME0 0xf32500ff
/*P2_VITSCALE*/
-#define R0900_P2_VITSCALE 0xf332
-#define F0900_P2_NVTH_NOSRANGE 0xf3320080
-#define F0900_P2_VERROR_MAXMODE 0xf3320040
-#define F0900_P2_KDIV_MODE 0xf3320030
-#define F0900_P2_NSLOWSN_LOCKED 0xf3320008
-#define F0900_P2_DELOCK_PRFLOSS 0xf3320004
-#define F0900_P2_DIS_RSFLOCK 0xf3320002
+#define R0900_P2_VITSCALE 0xf332
+#define F0900_P2_NVTH_NOSRANGE 0xf3320080
+#define F0900_P2_VERROR_MAXMODE 0xf3320040
+#define F0900_P2_NSLOWSN_LOCKED 0xf3320008
+#define F0900_P2_DIS_RSFLOCK 0xf3320002
/*P2_FECM*/
-#define R0900_P2_FECM 0xf333
-#define F0900_P2_DSS_DVB 0xf3330080
-#define F0900_P2_DEMOD_BYPASS 0xf3330040
-#define F0900_P2_CMP_SLOWMODE 0xf3330020
-#define F0900_P2_DSS_SRCH 0xf3330010
-#define F0900_P2_DIFF_MODEVIT 0xf3330004
-#define F0900_P2_SYNCVIT 0xf3330002
-#define F0900_P2_IQINV 0xf3330001
+#define R0900_P2_FECM 0xf333
+#define F0900_P2_DSS_DVB 0xf3330080
+#define F0900_P2_DSS_SRCH 0xf3330010
+#define F0900_P2_SYNCVIT 0xf3330002
+#define F0900_P2_IQINV 0xf3330001
/*P2_VTH12*/
-#define R0900_P2_VTH12 0xf334
-#define F0900_P2_VTH12 0xf33400ff
+#define R0900_P2_VTH12 0xf334
+#define F0900_P2_VTH12 0xf33400ff
/*P2_VTH23*/
-#define R0900_P2_VTH23 0xf335
-#define F0900_P2_VTH23 0xf33500ff
+#define R0900_P2_VTH23 0xf335
+#define F0900_P2_VTH23 0xf33500ff
/*P2_VTH34*/
-#define R0900_P2_VTH34 0xf336
-#define F0900_P2_VTH34 0xf33600ff
+#define R0900_P2_VTH34 0xf336
+#define F0900_P2_VTH34 0xf33600ff
/*P2_VTH56*/
-#define R0900_P2_VTH56 0xf337
-#define F0900_P2_VTH56 0xf33700ff
+#define R0900_P2_VTH56 0xf337
+#define F0900_P2_VTH56 0xf33700ff
/*P2_VTH67*/
-#define R0900_P2_VTH67 0xf338
-#define F0900_P2_VTH67 0xf33800ff
+#define R0900_P2_VTH67 0xf338
+#define F0900_P2_VTH67 0xf33800ff
/*P2_VTH78*/
-#define R0900_P2_VTH78 0xf339
-#define F0900_P2_VTH78 0xf33900ff
+#define R0900_P2_VTH78 0xf339
+#define F0900_P2_VTH78 0xf33900ff
/*P2_VITCURPUN*/
-#define R0900_P2_VITCURPUN 0xf33a
-#define F0900_P2_VIT_MAPPING 0xf33a00e0
-#define F0900_P2_VIT_CURPUN 0xf33a001f
+#define R0900_P2_VITCURPUN 0xf33a
+#define F0900_P2_VIT_CURPUN 0xf33a001f
/*P2_VERROR*/
-#define R0900_P2_VERROR 0xf33b
-#define F0900_P2_REGERR_VIT 0xf33b00ff
+#define R0900_P2_VERROR 0xf33b
+#define F0900_P2_REGERR_VIT 0xf33b00ff
/*P2_PRVIT*/
-#define R0900_P2_PRVIT 0xf33c
-#define F0900_P2_DIS_VTHLOCK 0xf33c0040
-#define F0900_P2_E7_8VIT 0xf33c0020
-#define F0900_P2_E6_7VIT 0xf33c0010
-#define F0900_P2_E5_6VIT 0xf33c0008
-#define F0900_P2_E3_4VIT 0xf33c0004
-#define F0900_P2_E2_3VIT 0xf33c0002
-#define F0900_P2_E1_2VIT 0xf33c0001
+#define R0900_P2_PRVIT 0xf33c
+#define F0900_P2_DIS_VTHLOCK 0xf33c0040
+#define F0900_P2_E7_8VIT 0xf33c0020
+#define F0900_P2_E6_7VIT 0xf33c0010
+#define F0900_P2_E5_6VIT 0xf33c0008
+#define F0900_P2_E3_4VIT 0xf33c0004
+#define F0900_P2_E2_3VIT 0xf33c0002
+#define F0900_P2_E1_2VIT 0xf33c0001
/*P2_VAVSRVIT*/
-#define R0900_P2_VAVSRVIT 0xf33d
-#define F0900_P2_AMVIT 0xf33d0080
-#define F0900_P2_FROZENVIT 0xf33d0040
-#define F0900_P2_SNVIT 0xf33d0030
-#define F0900_P2_TOVVIT 0xf33d000c
-#define F0900_P2_HYPVIT 0xf33d0003
+#define R0900_P2_VAVSRVIT 0xf33d
+#define F0900_P2_AMVIT 0xf33d0080
+#define F0900_P2_FROZENVIT 0xf33d0040
+#define F0900_P2_SNVIT 0xf33d0030
+#define F0900_P2_TOVVIT 0xf33d000c
+#define F0900_P2_HYPVIT 0xf33d0003
/*P2_VSTATUSVIT*/
-#define R0900_P2_VSTATUSVIT 0xf33e
-#define F0900_P2_VITERBI_ON 0xf33e0080
-#define F0900_P2_END_LOOPVIT 0xf33e0040
-#define F0900_P2_VITERBI_DEPRF 0xf33e0020
-#define F0900_P2_PRFVIT 0xf33e0010
-#define F0900_P2_LOCKEDVIT 0xf33e0008
-#define F0900_P2_VITERBI_DELOCK 0xf33e0004
-#define F0900_P2_VIT_DEMODSEL 0xf33e0002
-#define F0900_P2_VITERBI_COMPOUT 0xf33e0001
+#define R0900_P2_VSTATUSVIT 0xf33e
+#define F0900_P2_PRFVIT 0xf33e0010
+#define F0900_P2_LOCKEDVIT 0xf33e0008
/*P2_VTHINUSE*/
-#define R0900_P2_VTHINUSE 0xf33f
-#define F0900_P2_VIT_INUSE 0xf33f00ff
+#define R0900_P2_VTHINUSE 0xf33f
+#define F0900_P2_VIT_INUSE 0xf33f00ff
/*P2_KDIV12*/
-#define R0900_P2_KDIV12 0xf340
-#define F0900_P2_KDIV12_MANUAL 0xf3400080
-#define F0900_P2_K_DIVIDER_12 0xf340007f
+#define R0900_P2_KDIV12 0xf340
+#define F0900_P2_K_DIVIDER_12 0xf340007f
/*P2_KDIV23*/
-#define R0900_P2_KDIV23 0xf341
-#define F0900_P2_KDIV23_MANUAL 0xf3410080
-#define F0900_P2_K_DIVIDER_23 0xf341007f
+#define R0900_P2_KDIV23 0xf341
+#define F0900_P2_K_DIVIDER_23 0xf341007f
/*P2_KDIV34*/
-#define R0900_P2_KDIV34 0xf342
-#define F0900_P2_KDIV34_MANUAL 0xf3420080
-#define F0900_P2_K_DIVIDER_34 0xf342007f
+#define R0900_P2_KDIV34 0xf342
+#define F0900_P2_K_DIVIDER_34 0xf342007f
/*P2_KDIV56*/
-#define R0900_P2_KDIV56 0xf343
-#define F0900_P2_KDIV56_MANUAL 0xf3430080
-#define F0900_P2_K_DIVIDER_56 0xf343007f
+#define R0900_P2_KDIV56 0xf343
+#define F0900_P2_K_DIVIDER_56 0xf343007f
/*P2_KDIV67*/
-#define R0900_P2_KDIV67 0xf344
-#define F0900_P2_KDIV67_MANUAL 0xf3440080
-#define F0900_P2_K_DIVIDER_67 0xf344007f
+#define R0900_P2_KDIV67 0xf344
+#define F0900_P2_K_DIVIDER_67 0xf344007f
/*P2_KDIV78*/
-#define R0900_P2_KDIV78 0xf345
-#define F0900_P2_KDIV78_MANUAL 0xf3450080
-#define F0900_P2_K_DIVIDER_78 0xf345007f
+#define R0900_P2_KDIV78 0xf345
+#define F0900_P2_K_DIVIDER_78 0xf345007f
/*P2_PDELCTRL1*/
-#define R0900_P2_PDELCTRL1 0xf350
-#define F0900_P2_INV_MISMASK 0xf3500080
-#define F0900_P2_FORCE_ACCEPTED 0xf3500040
-#define F0900_P2_FILTER_EN 0xf3500020
-#define F0900_P2_FORCE_PKTDELINUSE 0xf3500010
-#define F0900_P2_HYSTEN 0xf3500008
-#define F0900_P2_HYSTSWRST 0xf3500004
-#define F0900_P2_EN_MIS00 0xf3500002
-#define F0900_P2_ALGOSWRST 0xf3500001
+#define R0900_P2_PDELCTRL1 0xf350
+#define F0900_P2_INV_MISMASK 0xf3500080
+#define F0900_P2_FILTER_EN 0xf3500020
+#define F0900_P2_EN_MIS00 0xf3500002
+#define F0900_P2_ALGOSWRST 0xf3500001
/*P2_PDELCTRL2*/
-#define R0900_P2_PDELCTRL2 0xf351
-#define F0900_P2_FORCE_CONTINUOUS 0xf3510080
-#define F0900_P2_RESET_UPKO_COUNT 0xf3510040
-#define F0900_P2_USER_PKTDELIN_NB 0xf3510020
-#define F0900_P2_FORCE_LOCKED 0xf3510010
-#define F0900_P2_DATA_UNBBSCRAM 0xf3510008
-#define F0900_P2_FORCE_LONGPKT 0xf3510004
-#define F0900_P2_FRAME_MODE 0xf3510002
+#define R0900_P2_PDELCTRL2 0xf351
+#define F0900_P2_RESET_UPKO_COUNT 0xf3510040
+#define F0900_P2_FRAME_MODE 0xf3510002
+#define F0900_P2_NOBCHERRFLG_USE 0xf3510001
/*P2_HYSTTHRESH*/
-#define R0900_P2_HYSTTHRESH 0xf354
-#define F0900_P2_UNLCK_THRESH 0xf35400f0
-#define F0900_P2_DELIN_LCK_THRESH 0xf354000f
+#define R0900_P2_HYSTTHRESH 0xf354
+#define F0900_P2_UNLCK_THRESH 0xf35400f0
+#define F0900_P2_DELIN_LCK_THRESH 0xf354000f
/*P2_ISIENTRY*/
-#define R0900_P2_ISIENTRY 0xf35e
-#define F0900_P2_ISI_ENTRY 0xf35e00ff
+#define R0900_P2_ISIENTRY 0xf35e
+#define F0900_P2_ISI_ENTRY 0xf35e00ff
/*P2_ISIBITENA*/
-#define R0900_P2_ISIBITENA 0xf35f
-#define F0900_P2_ISI_BIT_EN 0xf35f00ff
+#define R0900_P2_ISIBITENA 0xf35f
+#define F0900_P2_ISI_BIT_EN 0xf35f00ff
/*P2_MATSTR1*/
-#define R0900_P2_MATSTR1 0xf360
-#define F0900_P2_MATYPE_CURRENT1 0xf36000ff
+#define R0900_P2_MATSTR1 0xf360
+#define F0900_P2_MATYPE_CURRENT1 0xf36000ff
/*P2_MATSTR0*/
-#define R0900_P2_MATSTR0 0xf361
-#define F0900_P2_MATYPE_CURRENT0 0xf36100ff
+#define R0900_P2_MATSTR0 0xf361
+#define F0900_P2_MATYPE_CURRENT0 0xf36100ff
/*P2_UPLSTR1*/
-#define R0900_P2_UPLSTR1 0xf362
-#define F0900_P2_UPL_CURRENT1 0xf36200ff
+#define R0900_P2_UPLSTR1 0xf362
+#define F0900_P2_UPL_CURRENT1 0xf36200ff
/*P2_UPLSTR0*/
-#define R0900_P2_UPLSTR0 0xf363
-#define F0900_P2_UPL_CURRENT0 0xf36300ff
+#define R0900_P2_UPLSTR0 0xf363
+#define F0900_P2_UPL_CURRENT0 0xf36300ff
/*P2_DFLSTR1*/
-#define R0900_P2_DFLSTR1 0xf364
-#define F0900_P2_DFL_CURRENT1 0xf36400ff
+#define R0900_P2_DFLSTR1 0xf364
+#define F0900_P2_DFL_CURRENT1 0xf36400ff
/*P2_DFLSTR0*/
-#define R0900_P2_DFLSTR0 0xf365
-#define F0900_P2_DFL_CURRENT0 0xf36500ff
+#define R0900_P2_DFLSTR0 0xf365
+#define F0900_P2_DFL_CURRENT0 0xf36500ff
/*P2_SYNCSTR*/
-#define R0900_P2_SYNCSTR 0xf366
-#define F0900_P2_SYNC_CURRENT 0xf36600ff
+#define R0900_P2_SYNCSTR 0xf366
+#define F0900_P2_SYNC_CURRENT 0xf36600ff
/*P2_SYNCDSTR1*/
-#define R0900_P2_SYNCDSTR1 0xf367
-#define F0900_P2_SYNCD_CURRENT1 0xf36700ff
+#define R0900_P2_SYNCDSTR1 0xf367
+#define F0900_P2_SYNCD_CURRENT1 0xf36700ff
/*P2_SYNCDSTR0*/
-#define R0900_P2_SYNCDSTR0 0xf368
-#define F0900_P2_SYNCD_CURRENT0 0xf36800ff
+#define R0900_P2_SYNCDSTR0 0xf368
+#define F0900_P2_SYNCD_CURRENT0 0xf36800ff
/*P2_PDELSTATUS1*/
-#define R0900_P2_PDELSTATUS1 0xf369
-#define F0900_P2_PKTDELIN_DELOCK 0xf3690080
-#define F0900_P2_SYNCDUPDFL_BADDFL 0xf3690040
-#define F0900_P2_CONTINUOUS_STREAM 0xf3690020
-#define F0900_P2_UNACCEPTED_STREAM 0xf3690010
-#define F0900_P2_BCH_ERROR_FLAG 0xf3690008
-#define F0900_P2_BBHCRCKO 0xf3690004
-#define F0900_P2_PKTDELIN_LOCK 0xf3690002
-#define F0900_P2_FIRST_LOCK 0xf3690001
+#define R0900_P2_PDELSTATUS1 0xf369
+#define F0900_P2_PKTDELIN_DELOCK 0xf3690080
+#define F0900_P2_SYNCDUPDFL_BADDFL 0xf3690040
+#define F0900_P2_CONTINUOUS_STREAM 0xf3690020
+#define F0900_P2_UNACCEPTED_STREAM 0xf3690010
+#define F0900_P2_BCH_ERROR_FLAG 0xf3690008
+#define F0900_P2_PKTDELIN_LOCK 0xf3690002
+#define F0900_P2_FIRST_LOCK 0xf3690001
/*P2_PDELSTATUS2*/
-#define R0900_P2_PDELSTATUS2 0xf36a
-#define F0900_P2_PKTDEL_DEMODSEL 0xf36a0080
-#define F0900_P2_FRAME_MODCOD 0xf36a007c
-#define F0900_P2_FRAME_TYPE 0xf36a0003
+#define R0900_P2_PDELSTATUS2 0xf36a
+#define F0900_P2_FRAME_MODCOD 0xf36a007c
+#define F0900_P2_FRAME_TYPE 0xf36a0003
/*P2_BBFCRCKO1*/
-#define R0900_P2_BBFCRCKO1 0xf36b
-#define F0900_P2_BBHCRC_KOCNT1 0xf36b00ff
+#define R0900_P2_BBFCRCKO1 0xf36b
+#define F0900_P2_BBHCRC_KOCNT1 0xf36b00ff
/*P2_BBFCRCKO0*/
-#define R0900_P2_BBFCRCKO0 0xf36c
-#define F0900_P2_BBHCRC_KOCNT0 0xf36c00ff
+#define R0900_P2_BBFCRCKO0 0xf36c
+#define F0900_P2_BBHCRC_KOCNT0 0xf36c00ff
/*P2_UPCRCKO1*/
-#define R0900_P2_UPCRCKO1 0xf36d
-#define F0900_P2_PKTCRC_KOCNT1 0xf36d00ff
+#define R0900_P2_UPCRCKO1 0xf36d
+#define F0900_P2_PKTCRC_KOCNT1 0xf36d00ff
/*P2_UPCRCKO0*/
-#define R0900_P2_UPCRCKO0 0xf36e
-#define F0900_P2_PKTCRC_KOCNT0 0xf36e00ff
+#define R0900_P2_UPCRCKO0 0xf36e
+#define F0900_P2_PKTCRC_KOCNT0 0xf36e00ff
+
+/*P2_PDELCTRL3*/
+#define R0900_P2_PDELCTRL3 0xf36f
+#define F0900_P2_PKTDEL_CONTFAIL 0xf36f0080
+#define F0900_P2_NOFIFO_BCHERR 0xf36f0020
/*P2_TSSTATEM*/
-#define R0900_P2_TSSTATEM 0xf370
-#define F0900_P2_TSDIL_ON 0xf3700080
-#define F0900_P2_TSSKIPRS_ON 0xf3700040
-#define F0900_P2_TSRS_ON 0xf3700020
-#define F0900_P2_TSDESCRAMB_ON 0xf3700010
-#define F0900_P2_TSFRAME_MODE 0xf3700008
-#define F0900_P2_TS_DISABLE 0xf3700004
-#define F0900_P2_TSACM_MODE 0xf3700002
-#define F0900_P2_TSOUT_NOSYNC 0xf3700001
+#define R0900_P2_TSSTATEM 0xf370
+#define F0900_P2_TSDIL_ON 0xf3700080
+#define F0900_P2_TSRS_ON 0xf3700020
+#define F0900_P2_TSDESCRAMB_ON 0xf3700010
+#define F0900_P2_TSFRAME_MODE 0xf3700008
+#define F0900_P2_TS_DISABLE 0xf3700004
+#define F0900_P2_TSOUT_NOSYNC 0xf3700001
/*P2_TSCFGH*/
-#define R0900_P2_TSCFGH 0xf372
-#define F0900_P2_TSFIFO_DVBCI 0xf3720080
-#define F0900_P2_TSFIFO_SERIAL 0xf3720040
-#define F0900_P2_TSFIFO_TEIUPDATE 0xf3720020
-#define F0900_P2_TSFIFO_DUTY50 0xf3720010
-#define F0900_P2_TSFIFO_HSGNLOUT 0xf3720008
-#define F0900_P2_TSFIFO_ERRMODE 0xf3720006
-#define F0900_P2_RST_HWARE 0xf3720001
+#define R0900_P2_TSCFGH 0xf372
+#define F0900_P2_TSFIFO_DVBCI 0xf3720080
+#define F0900_P2_TSFIFO_SERIAL 0xf3720040
+#define F0900_P2_TSFIFO_TEIUPDATE 0xf3720020
+#define F0900_P2_TSFIFO_DUTY50 0xf3720010
+#define F0900_P2_TSFIFO_HSGNLOUT 0xf3720008
+#define F0900_P2_TSFIFO_ERRMODE 0xf3720006
+#define F0900_P2_RST_HWARE 0xf3720001
/*P2_TSCFGM*/
-#define R0900_P2_TSCFGM 0xf373
-#define F0900_P2_TSFIFO_MANSPEED 0xf37300c0
-#define F0900_P2_TSFIFO_PERMDATA 0xf3730020
-#define F0900_P2_TSFIFO_NONEWSGNL 0xf3730010
-#define F0900_P2_TSFIFO_BITSPEED 0xf3730008
-#define F0900_P2_NPD_SPECDVBS2 0xf3730004
-#define F0900_P2_TSFIFO_STOPCKDIS 0xf3730002
-#define F0900_P2_TSFIFO_INVDATA 0xf3730001
+#define R0900_P2_TSCFGM 0xf373
+#define F0900_P2_TSFIFO_MANSPEED 0xf37300c0
+#define F0900_P2_TSFIFO_PERMDATA 0xf3730020
+#define F0900_P2_TSFIFO_DPUNACT 0xf3730002
+#define F0900_P2_TSFIFO_INVDATA 0xf3730001
/*P2_TSCFGL*/
-#define R0900_P2_TSCFGL 0xf374
-#define F0900_P2_TSFIFO_BCLKDEL1CK 0xf37400c0
-#define F0900_P2_BCHERROR_MODE 0xf3740030
-#define F0900_P2_TSFIFO_NSGNL2DATA 0xf3740008
-#define F0900_P2_TSFIFO_EMBINDVB 0xf3740004
-#define F0900_P2_TSFIFO_DPUNACT 0xf3740002
-#define F0900_P2_TSFIFO_NPDOFF 0xf3740001
+#define R0900_P2_TSCFGL 0xf374
+#define F0900_P2_TSFIFO_BCLKDEL1CK 0xf37400c0
+#define F0900_P2_BCHERROR_MODE 0xf3740030
+#define F0900_P2_TSFIFO_NSGNL2DATA 0xf3740008
+#define F0900_P2_TSFIFO_EMBINDVB 0xf3740004
+#define F0900_P2_TSFIFO_BITSPEED 0xf3740003
/*P2_TSINSDELH*/
-#define R0900_P2_TSINSDELH 0xf376
-#define F0900_P2_TSDEL_SYNCBYTE 0xf3760080
-#define F0900_P2_TSDEL_XXHEADER 0xf3760040
-#define F0900_P2_TSDEL_BBHEADER 0xf3760020
-#define F0900_P2_TSDEL_DATAFIELD 0xf3760010
-#define F0900_P2_TSINSDEL_ISCR 0xf3760008
-#define F0900_P2_TSINSDEL_NPD 0xf3760004
-#define F0900_P2_TSINSDEL_RSPARITY 0xf3760002
-#define F0900_P2_TSINSDEL_CRC8 0xf3760001
+#define R0900_P2_TSINSDELH 0xf376
+#define F0900_P2_TSDEL_SYNCBYTE 0xf3760080
+#define F0900_P2_TSDEL_XXHEADER 0xf3760040
+#define F0900_P2_TSDEL_BBHEADER 0xf3760020
+#define F0900_P2_TSDEL_DATAFIELD 0xf3760010
+#define F0900_P2_TSINSDEL_ISCR 0xf3760008
+#define F0900_P2_TSINSDEL_NPD 0xf3760004
+#define F0900_P2_TSINSDEL_RSPARITY 0xf3760002
+#define F0900_P2_TSINSDEL_CRC8 0xf3760001
+
+/*P2_TSDIVN*/
+#define R0900_P2_TSDIVN 0xf379
+#define F0900_P2_TSFIFO_SPEEDMODE 0xf37900c0
+
+/*P2_TSCFG4*/
+#define R0900_P2_TSCFG4 0xf37a
+#define F0900_P2_TSFIFO_TSSPEEDMODE 0xf37a00c0
/*P2_TSSPEED*/
-#define R0900_P2_TSSPEED 0xf380
-#define F0900_P2_TSFIFO_OUTSPEED 0xf38000ff
+#define R0900_P2_TSSPEED 0xf380
+#define F0900_P2_TSFIFO_OUTSPEED 0xf38000ff
/*P2_TSSTATUS*/
-#define R0900_P2_TSSTATUS 0xf381
-#define F0900_P2_TSFIFO_LINEOK 0xf3810080
-#define F0900_P2_TSFIFO_ERROR 0xf3810040
-#define F0900_P2_TSFIFO_DATA7 0xf3810020
-#define F0900_P2_TSFIFO_NOSYNC 0xf3810010
-#define F0900_P2_ISCR_INITIALIZED 0xf3810008
-#define F0900_P2_ISCR_UPDATED 0xf3810004
-#define F0900_P2_SOFFIFO_UNREGUL 0xf3810002
-#define F0900_P2_DIL_READY 0xf3810001
+#define R0900_P2_TSSTATUS 0xf381
+#define F0900_P2_TSFIFO_LINEOK 0xf3810080
+#define F0900_P2_TSFIFO_ERROR 0xf3810040
+#define F0900_P2_DIL_READY 0xf3810001
/*P2_TSSTATUS2*/
-#define R0900_P2_TSSTATUS2 0xf382
-#define F0900_P2_TSFIFO_DEMODSEL 0xf3820080
-#define F0900_P2_TSFIFOSPEED_STORE 0xf3820040
-#define F0900_P2_DILXX_RESET 0xf3820020
-#define F0900_P2_TSSERIAL_IMPOS 0xf3820010
-#define F0900_P2_TSFIFO_LINENOK 0xf3820008
-#define F0900_P2_BITSPEED_EVENT 0xf3820004
-#define F0900_P2_SCRAMBDETECT 0xf3820002
-#define F0900_P2_ULDTV67_FALSELOCK 0xf3820001
+#define R0900_P2_TSSTATUS2 0xf382
+#define F0900_P2_TSFIFO_DEMODSEL 0xf3820080
+#define F0900_P2_TSFIFOSPEED_STORE 0xf3820040
+#define F0900_P2_DILXX_RESET 0xf3820020
+#define F0900_P2_TSSERIAL_IMPOS 0xf3820010
+#define F0900_P2_SCRAMBDETECT 0xf3820002
/*P2_TSBITRATE1*/
-#define R0900_P2_TSBITRATE1 0xf383
-#define F0900_P2_TSFIFO_BITRATE1 0xf38300ff
+#define R0900_P2_TSBITRATE1 0xf383
+#define F0900_P2_TSFIFO_BITRATE1 0xf38300ff
/*P2_TSBITRATE0*/
-#define R0900_P2_TSBITRATE0 0xf384
-#define F0900_P2_TSFIFO_BITRATE0 0xf38400ff
+#define R0900_P2_TSBITRATE0 0xf384
+#define F0900_P2_TSFIFO_BITRATE0 0xf38400ff
/*P2_ERRCTRL1*/
-#define R0900_P2_ERRCTRL1 0xf398
-#define F0900_P2_ERR_SOURCE1 0xf39800f0
-#define F0900_P2_NUM_EVENT1 0xf3980007
+#define R0900_P2_ERRCTRL1 0xf398
+#define F0900_P2_ERR_SOURCE1 0xf39800f0
+#define F0900_P2_NUM_EVENT1 0xf3980007
/*P2_ERRCNT12*/
-#define R0900_P2_ERRCNT12 0xf399
-#define F0900_P2_ERRCNT1_OLDVALUE 0xf3990080
-#define F0900_P2_ERR_CNT12 0xf399007f
+#define R0900_P2_ERRCNT12 0xf399
+#define F0900_P2_ERRCNT1_OLDVALUE 0xf3990080
+#define F0900_P2_ERR_CNT12 0xf399007f
/*P2_ERRCNT11*/
-#define R0900_P2_ERRCNT11 0xf39a
-#define F0900_P2_ERR_CNT11 0xf39a00ff
+#define R0900_P2_ERRCNT11 0xf39a
+#define F0900_P2_ERR_CNT11 0xf39a00ff
/*P2_ERRCNT10*/
-#define R0900_P2_ERRCNT10 0xf39b
-#define F0900_P2_ERR_CNT10 0xf39b00ff
+#define R0900_P2_ERRCNT10 0xf39b
+#define F0900_P2_ERR_CNT10 0xf39b00ff
/*P2_ERRCTRL2*/
-#define R0900_P2_ERRCTRL2 0xf39c
-#define F0900_P2_ERR_SOURCE2 0xf39c00f0
-#define F0900_P2_NUM_EVENT2 0xf39c0007
+#define R0900_P2_ERRCTRL2 0xf39c
+#define F0900_P2_ERR_SOURCE2 0xf39c00f0
+#define F0900_P2_NUM_EVENT2 0xf39c0007
/*P2_ERRCNT22*/
-#define R0900_P2_ERRCNT22 0xf39d
-#define F0900_P2_ERRCNT2_OLDVALUE 0xf39d0080
-#define F0900_P2_ERR_CNT22 0xf39d007f
+#define R0900_P2_ERRCNT22 0xf39d
+#define F0900_P2_ERRCNT2_OLDVALUE 0xf39d0080
+#define F0900_P2_ERR_CNT22 0xf39d007f
/*P2_ERRCNT21*/
-#define R0900_P2_ERRCNT21 0xf39e
-#define F0900_P2_ERR_CNT21 0xf39e00ff
+#define R0900_P2_ERRCNT21 0xf39e
+#define F0900_P2_ERR_CNT21 0xf39e00ff
/*P2_ERRCNT20*/
-#define R0900_P2_ERRCNT20 0xf39f
-#define F0900_P2_ERR_CNT20 0xf39f00ff
+#define R0900_P2_ERRCNT20 0xf39f
+#define F0900_P2_ERR_CNT20 0xf39f00ff
/*P2_FECSPY*/
-#define R0900_P2_FECSPY 0xf3a0
-#define F0900_P2_SPY_ENABLE 0xf3a00080
-#define F0900_P2_NO_SYNCBYTE 0xf3a00040
-#define F0900_P2_SERIAL_MODE 0xf3a00020
-#define F0900_P2_UNUSUAL_PACKET 0xf3a00010
-#define F0900_P2_BER_PACKMODE 0xf3a00008
-#define F0900_P2_BERMETER_LMODE 0xf3a00002
-#define F0900_P2_BERMETER_RESET 0xf3a00001
+#define R0900_P2_FECSPY 0xf3a0
+#define F0900_P2_SPY_ENABLE 0xf3a00080
+#define F0900_P2_NO_SYNCBYTE 0xf3a00040
+#define F0900_P2_SERIAL_MODE 0xf3a00020
+#define F0900_P2_UNUSUAL_PACKET 0xf3a00010
+#define F0900_P2_BERMETER_DATAMODE 0xf3a00008
+#define F0900_P2_BERMETER_LMODE 0xf3a00002
+#define F0900_P2_BERMETER_RESET 0xf3a00001
/*P2_FSPYCFG*/
-#define R0900_P2_FSPYCFG 0xf3a1
-#define F0900_P2_FECSPY_INPUT 0xf3a100c0
-#define F0900_P2_RST_ON_ERROR 0xf3a10020
-#define F0900_P2_ONE_SHOT 0xf3a10010
-#define F0900_P2_I2C_MODE 0xf3a1000c
-#define F0900_P2_SPY_HYSTERESIS 0xf3a10003
+#define R0900_P2_FSPYCFG 0xf3a1
+#define F0900_P2_FECSPY_INPUT 0xf3a100c0
+#define F0900_P2_RST_ON_ERROR 0xf3a10020
+#define F0900_P2_ONE_SHOT 0xf3a10010
+#define F0900_P2_I2C_MODE 0xf3a1000c
+#define F0900_P2_SPY_HYSTERESIS 0xf3a10003
/*P2_FSPYDATA*/
-#define R0900_P2_FSPYDATA 0xf3a2
-#define F0900_P2_SPY_STUFFING 0xf3a20080
-#define F0900_P2_NOERROR_PKTJITTER 0xf3a20040
-#define F0900_P2_SPY_CNULLPKT 0xf3a20020
-#define F0900_P2_SPY_OUTDATA_MODE 0xf3a2001f
+#define R0900_P2_FSPYDATA 0xf3a2
+#define F0900_P2_SPY_STUFFING 0xf3a20080
+#define F0900_P2_SPY_CNULLPKT 0xf3a20020
+#define F0900_P2_SPY_OUTDATA_MODE 0xf3a2001f
/*P2_FSPYOUT*/
-#define R0900_P2_FSPYOUT 0xf3a3
-#define F0900_P2_FSPY_DIRECT 0xf3a30080
-#define F0900_P2_SPY_OUTDATA_BUS 0xf3a30038
-#define F0900_P2_STUFF_MODE 0xf3a30007
+#define R0900_P2_FSPYOUT 0xf3a3
+#define F0900_P2_FSPY_DIRECT 0xf3a30080
+#define F0900_P2_STUFF_MODE 0xf3a30007
/*P2_FSTATUS*/
-#define R0900_P2_FSTATUS 0xf3a4
-#define F0900_P2_SPY_ENDSIM 0xf3a40080
-#define F0900_P2_VALID_SIM 0xf3a40040
-#define F0900_P2_FOUND_SIGNAL 0xf3a40020
-#define F0900_P2_DSS_SYNCBYTE 0xf3a40010
-#define F0900_P2_RESULT_STATE 0xf3a4000f
+#define R0900_P2_FSTATUS 0xf3a4
+#define F0900_P2_SPY_ENDSIM 0xf3a40080
+#define F0900_P2_VALID_SIM 0xf3a40040
+#define F0900_P2_FOUND_SIGNAL 0xf3a40020
+#define F0900_P2_DSS_SYNCBYTE 0xf3a40010
+#define F0900_P2_RESULT_STATE 0xf3a4000f
/*P2_FBERCPT4*/
-#define R0900_P2_FBERCPT4 0xf3a8
-#define F0900_P2_FBERMETER_CPT4 0xf3a800ff
+#define R0900_P2_FBERCPT4 0xf3a8
+#define F0900_P2_FBERMETER_CPT4 0xf3a800ff
/*P2_FBERCPT3*/
-#define R0900_P2_FBERCPT3 0xf3a9
-#define F0900_P2_FBERMETER_CPT3 0xf3a900ff
+#define R0900_P2_FBERCPT3 0xf3a9
+#define F0900_P2_FBERMETER_CPT3 0xf3a900ff
/*P2_FBERCPT2*/
-#define R0900_P2_FBERCPT2 0xf3aa
-#define F0900_P2_FBERMETER_CPT2 0xf3aa00ff
+#define R0900_P2_FBERCPT2 0xf3aa
+#define F0900_P2_FBERMETER_CPT2 0xf3aa00ff
/*P2_FBERCPT1*/
-#define R0900_P2_FBERCPT1 0xf3ab
-#define F0900_P2_FBERMETER_CPT1 0xf3ab00ff
+#define R0900_P2_FBERCPT1 0xf3ab
+#define F0900_P2_FBERMETER_CPT1 0xf3ab00ff
/*P2_FBERCPT0*/
-#define R0900_P2_FBERCPT0 0xf3ac
-#define F0900_P2_FBERMETER_CPT0 0xf3ac00ff
+#define R0900_P2_FBERCPT0 0xf3ac
+#define F0900_P2_FBERMETER_CPT0 0xf3ac00ff
/*P2_FBERERR2*/
-#define R0900_P2_FBERERR2 0xf3ad
-#define F0900_P2_FBERMETER_ERR2 0xf3ad00ff
+#define R0900_P2_FBERERR2 0xf3ad
+#define F0900_P2_FBERMETER_ERR2 0xf3ad00ff
/*P2_FBERERR1*/
-#define R0900_P2_FBERERR1 0xf3ae
-#define F0900_P2_FBERMETER_ERR1 0xf3ae00ff
+#define R0900_P2_FBERERR1 0xf3ae
+#define F0900_P2_FBERMETER_ERR1 0xf3ae00ff
/*P2_FBERERR0*/
-#define R0900_P2_FBERERR0 0xf3af
-#define F0900_P2_FBERMETER_ERR0 0xf3af00ff
+#define R0900_P2_FBERERR0 0xf3af
+#define F0900_P2_FBERMETER_ERR0 0xf3af00ff
/*P2_FSPYBER*/
-#define R0900_P2_FSPYBER 0xf3b2
-#define F0900_P2_FSPYOBS_XORREAD 0xf3b20040
-#define F0900_P2_FSPYBER_OBSMODE 0xf3b20020
-#define F0900_P2_FSPYBER_SYNCBYTE 0xf3b20010
-#define F0900_P2_FSPYBER_UNSYNC 0xf3b20008
-#define F0900_P2_FSPYBER_CTIME 0xf3b20007
+#define R0900_P2_FSPYBER 0xf3b2
+#define F0900_P2_FSPYBER_SYNCBYTE 0xf3b20010
+#define F0900_P2_FSPYBER_UNSYNC 0xf3b20008
+#define F0900_P2_FSPYBER_CTIME 0xf3b20007
/*P1_IQCONST*/
-#define R0900_P1_IQCONST 0xf400
-#define F0900_P1_CONSTEL_SELECT 0xf4000060
-#define F0900_P1_IQSYMB_SEL 0xf400001f
+#define R0900_P1_IQCONST 0xf400
+#define IQCONST REGx(R0900_P1_IQCONST)
+#define F0900_P1_CONSTEL_SELECT 0xf4000060
+#define F0900_P1_IQSYMB_SEL 0xf400001f
/*P1_NOSCFG*/
-#define R0900_P1_NOSCFG 0xf401
-#define F0900_P1_DUMMYPL_NOSDATA 0xf4010020
-#define F0900_P1_NOSPLH_BETA 0xf4010018
-#define F0900_P1_NOSDATA_BETA 0xf4010007
+#define R0900_P1_NOSCFG 0xf401
+#define NOSCFG REGx(R0900_P1_NOSCFG)
+#define F0900_P1_DUMMYPL_NOSDATA 0xf4010020
+#define F0900_P1_NOSPLH_BETA 0xf4010018
+#define F0900_P1_NOSDATA_BETA 0xf4010007
/*P1_ISYMB*/
-#define R0900_P1_ISYMB 0xf402
-#define F0900_P1_I_SYMBOL 0xf40201ff
+#define R0900_P1_ISYMB 0xf402
+#define ISYMB REGx(R0900_P1_ISYMB)
+#define F0900_P1_I_SYMBOL 0xf40201ff
/*P1_QSYMB*/
-#define R0900_P1_QSYMB 0xf403
-#define F0900_P1_Q_SYMBOL 0xf40301ff
+#define R0900_P1_QSYMB 0xf403
+#define QSYMB REGx(R0900_P1_QSYMB)
+#define F0900_P1_Q_SYMBOL 0xf40301ff
/*P1_AGC1CFG*/
-#define R0900_P1_AGC1CFG 0xf404
-#define F0900_P1_DC_FROZEN 0xf4040080
-#define F0900_P1_DC_CORRECT 0xf4040040
-#define F0900_P1_AMM_FROZEN 0xf4040020
-#define F0900_P1_AMM_CORRECT 0xf4040010
-#define F0900_P1_QUAD_FROZEN 0xf4040008
-#define F0900_P1_QUAD_CORRECT 0xf4040004
-#define F0900_P1_DCCOMP_SLOW 0xf4040002
-#define F0900_P1_IQMISM_SLOW 0xf4040001
+#define R0900_P1_AGC1CFG 0xf404
+#define AGC1CFG REGx(R0900_P1_AGC1CFG)
+#define F0900_P1_DC_FROZEN 0xf4040080
+#define F0900_P1_DC_CORRECT 0xf4040040
+#define F0900_P1_AMM_FROZEN 0xf4040020
+#define F0900_P1_AMM_CORRECT 0xf4040010
+#define F0900_P1_QUAD_FROZEN 0xf4040008
+#define F0900_P1_QUAD_CORRECT 0xf4040004
/*P1_AGC1CN*/
-#define R0900_P1_AGC1CN 0xf406
-#define F0900_P1_AGC1_LOCKED 0xf4060080
-#define F0900_P1_AGC1_OVERFLOW 0xf4060040
-#define F0900_P1_AGC1_NOSLOWLK 0xf4060020
-#define F0900_P1_AGC1_MINPOWER 0xf4060010
-#define F0900_P1_AGCOUT_FAST 0xf4060008
-#define F0900_P1_AGCIQ_BETA 0xf4060007
+#define R0900_P1_AGC1CN 0xf406
+#define AGC1CN REGx(R0900_P1_AGC1CN)
+#define F0900_P1_AGC1_LOCKED 0xf4060080
+#define F0900_P1_AGC1_MINPOWER 0xf4060010
+#define F0900_P1_AGCOUT_FAST 0xf4060008
+#define F0900_P1_AGCIQ_BETA 0xf4060007
/*P1_AGC1REF*/
-#define R0900_P1_AGC1REF 0xf407
-#define F0900_P1_AGCIQ_REF 0xf40700ff
+#define R0900_P1_AGC1REF 0xf407
+#define AGC1REF REGx(R0900_P1_AGC1REF)
+#define F0900_P1_AGCIQ_REF 0xf40700ff
/*P1_IDCCOMP*/
-#define R0900_P1_IDCCOMP 0xf408
-#define F0900_P1_IAVERAGE_ADJ 0xf40801ff
+#define R0900_P1_IDCCOMP 0xf408
+#define IDCCOMP REGx(R0900_P1_IDCCOMP)
+#define F0900_P1_IAVERAGE_ADJ 0xf40801ff
/*P1_QDCCOMP*/
-#define R0900_P1_QDCCOMP 0xf409
-#define F0900_P1_QAVERAGE_ADJ 0xf40901ff
+#define R0900_P1_QDCCOMP 0xf409
+#define QDCCOMP REGx(R0900_P1_QDCCOMP)
+#define F0900_P1_QAVERAGE_ADJ 0xf40901ff
/*P1_POWERI*/
-#define R0900_P1_POWERI 0xf40a
-#define F0900_P1_POWER_I 0xf40a00ff
+#define R0900_P1_POWERI 0xf40a
+#define POWERI REGx(R0900_P1_POWERI)
+#define F0900_P1_POWER_I 0xf40a00ff
+#define POWER_I FLDx(F0900_P1_POWER_I)
/*P1_POWERQ*/
-#define R0900_P1_POWERQ 0xf40b
-#define F0900_P1_POWER_Q 0xf40b00ff
+#define R0900_P1_POWERQ 0xf40b
+#define POWERQ REGx(R0900_P1_POWERQ)
+#define F0900_P1_POWER_Q 0xf40b00ff
+#define POWER_Q FLDx(F0900_P1_POWER_Q)
/*P1_AGC1AMM*/
-#define R0900_P1_AGC1AMM 0xf40c
-#define F0900_P1_AMM_VALUE 0xf40c00ff
+#define R0900_P1_AGC1AMM 0xf40c
+#define AGC1AMM REGx(R0900_P1_AGC1AMM)
+#define F0900_P1_AMM_VALUE 0xf40c00ff
/*P1_AGC1QUAD*/
-#define R0900_P1_AGC1QUAD 0xf40d
-#define F0900_P1_QUAD_VALUE 0xf40d01ff
+#define R0900_P1_AGC1QUAD 0xf40d
+#define AGC1QUAD REGx(R0900_P1_AGC1QUAD)
+#define F0900_P1_QUAD_VALUE 0xf40d01ff
/*P1_AGCIQIN1*/
-#define R0900_P1_AGCIQIN1 0xf40e
-#define F0900_P1_AGCIQ_VALUE1 0xf40e00ff
+#define R0900_P1_AGCIQIN1 0xf40e
+#define AGCIQIN1 REGx(R0900_P1_AGCIQIN1)
+#define F0900_P1_AGCIQ_VALUE1 0xf40e00ff
+#define AGCIQ_VALUE1 FLDx(F0900_P1_AGCIQ_VALUE1)
/*P1_AGCIQIN0*/
-#define R0900_P1_AGCIQIN0 0xf40f
-#define F0900_P1_AGCIQ_VALUE0 0xf40f00ff
+#define R0900_P1_AGCIQIN0 0xf40f
+#define AGCIQIN0 REGx(R0900_P1_AGCIQIN0)
+#define F0900_P1_AGCIQ_VALUE0 0xf40f00ff
+#define AGCIQ_VALUE0 FLDx(F0900_P1_AGCIQ_VALUE0)
/*P1_DEMOD*/
-#define R0900_P1_DEMOD 0xf410
-#define F0900_P1_DEMOD_STOP 0xf4100040
-#define F0900_P1_SPECINV_CONTROL 0xf4100030
-#define F0900_P1_FORCE_ENASAMP 0xf4100008
-#define F0900_P1_MANUAL_ROLLOFF 0xf4100004
-#define F0900_P1_ROLLOFF_CONTROL 0xf4100003
+#define R0900_P1_DEMOD 0xf410
+#define DEMOD REGx(R0900_P1_DEMOD)
+#define F0900_P1_MANUALS2_ROLLOFF 0xf4100080
+#define MANUALS2_ROLLOFF FLDx(F0900_P1_MANUALS2_ROLLOFF)
+
+#define F0900_P1_SPECINV_CONTROL 0xf4100030
+#define SPECINV_CONTROL FLDx(F0900_P1_SPECINV_CONTROL)
+#define F0900_P1_FORCE_ENASAMP 0xf4100008
+#define F0900_P1_MANUALSX_ROLLOFF 0xf4100004
+#define MANUALSX_ROLLOFF FLDx(F0900_P1_MANUALSX_ROLLOFF)
+#define F0900_P1_ROLLOFF_CONTROL 0xf4100003
+#define ROLLOFF_CONTROL FLDx(F0900_P1_ROLLOFF_CONTROL)
/*P1_DMDMODCOD*/
-#define R0900_P1_DMDMODCOD 0xf411
-#define F0900_P1_MANUAL_MODCOD 0xf4110080
-#define F0900_P1_DEMOD_MODCOD 0xf411007c
-#define F0900_P1_DEMOD_TYPE 0xf4110003
+#define R0900_P1_DMDMODCOD 0xf411
+#define DMDMODCOD REGx(R0900_P1_DMDMODCOD)
+#define F0900_P1_MANUAL_MODCOD 0xf4110080
+#define F0900_P1_DEMOD_MODCOD 0xf411007c
+#define DEMOD_MODCOD FLDx(F0900_P1_DEMOD_MODCOD)
+#define F0900_P1_DEMOD_TYPE 0xf4110003
+#define DEMOD_TYPE FLDx(F0900_P1_DEMOD_TYPE)
/*P1_DSTATUS*/
-#define R0900_P1_DSTATUS 0xf412
-#define F0900_P1_CAR_LOCK 0xf4120080
-#define F0900_P1_TMGLOCK_QUALITY 0xf4120060
-#define F0900_P1_SDVBS1_ENABLE 0xf4120010
-#define F0900_P1_LOCK_DEFINITIF 0xf4120008
-#define F0900_P1_TIMING_IS_LOCKED 0xf4120004
-#define F0900_P1_COARSE_TMGLOCK 0xf4120002
-#define F0900_P1_COARSE_CARLOCK 0xf4120001
+#define R0900_P1_DSTATUS 0xf412
+#define DSTATUS REGx(R0900_P1_DSTATUS)
+#define F0900_P1_CAR_LOCK 0xf4120080
+#define F0900_P1_TMGLOCK_QUALITY 0xf4120060
+#define TMGLOCK_QUALITY FLDx(F0900_P1_TMGLOCK_QUALITY)
+#define F0900_P1_LOCK_DEFINITIF 0xf4120008
+#define LOCK_DEFINITIF FLDx(F0900_P1_LOCK_DEFINITIF)
+#define F0900_P1_OVADC_DETECT 0xf4120001
/*P1_DSTATUS2*/
-#define R0900_P1_DSTATUS2 0xf413
-#define F0900_P1_DEMOD_DELOCK 0xf4130080
-#define F0900_P1_DEMOD_TIMEOUT 0xf4130040
-#define F0900_P1_MODCODRQ_SYNCTAG 0xf4130020
-#define F0900_P1_POLYPH_SATEVENT 0xf4130010
-#define F0900_P1_AGC1_NOSIGNALACK 0xf4130008
-#define F0900_P1_AGC2_OVERFLOW 0xf4130004
-#define F0900_P1_CFR_OVERFLOW 0xf4130002
-#define F0900_P1_GAMMA_OVERUNDER 0xf4130001
+#define R0900_P1_DSTATUS2 0xf413
+#define DSTATUS2 REGx(R0900_P1_DSTATUS2)
+#define F0900_P1_DEMOD_DELOCK 0xf4130080
+#define F0900_P1_AGC1_NOSIGNALACK 0xf4130008
+#define F0900_P1_AGC2_OVERFLOW 0xf4130004
+#define F0900_P1_CFR_OVERFLOW 0xf4130002
+#define F0900_P1_GAMMA_OVERUNDER 0xf4130001
/*P1_DMDCFGMD*/
-#define R0900_P1_DMDCFGMD 0xf414
-#define F0900_P1_DVBS2_ENABLE 0xf4140080
-#define F0900_P1_DVBS1_ENABLE 0xf4140040
-#define F0900_P1_CFR_AUTOSCAN 0xf4140020
-#define F0900_P1_SCAN_ENABLE 0xf4140010
-#define F0900_P1_TUN_AUTOSCAN 0xf4140008
-#define F0900_P1_NOFORCE_RELOCK 0xf4140004
-#define F0900_P1_TUN_RNG 0xf4140003
+#define R0900_P1_DMDCFGMD 0xf414
+#define DMDCFGMD REGx(R0900_P1_DMDCFGMD)
+#define F0900_P1_DVBS2_ENABLE 0xf4140080
+#define DVBS2_ENABLE FLDx(F0900_P1_DVBS2_ENABLE)
+#define F0900_P1_DVBS1_ENABLE 0xf4140040
+#define DVBS1_ENABLE FLDx(F0900_P1_DVBS1_ENABLE)
+#define F0900_P1_SCAN_ENABLE 0xf4140010
+#define SCAN_ENABLE FLDx(F0900_P1_SCAN_ENABLE)
+#define F0900_P1_CFR_AUTOSCAN 0xf4140008
+#define CFR_AUTOSCAN FLDx(F0900_P1_CFR_AUTOSCAN)
+#define F0900_P1_TUN_RNG 0xf4140003
/*P1_DMDCFG2*/
-#define R0900_P1_DMDCFG2 0xf415
-#define F0900_P1_AGC1_WAITLOCK 0xf4150080
-#define F0900_P1_S1S2_SEQUENTIAL 0xf4150040
-#define F0900_P1_OVERFLOW_TIMEOUT 0xf4150020
-#define F0900_P1_SCANFAIL_TIMEOUT 0xf4150010
-#define F0900_P1_DMDTOUT_BACK 0xf4150008
-#define F0900_P1_CARLOCK_S1ENABLE 0xf4150004
-#define F0900_P1_COARSE_LK3MODE 0xf4150002
-#define F0900_P1_COARSE_LK2MODE 0xf4150001
+#define R0900_P1_DMDCFG2 0xf415
+#define DMDCFG2 REGx(R0900_P1_DMDCFG2)
+#define F0900_P1_S1S2_SEQUENTIAL 0xf4150040
+#define S1S2_SEQUENTIAL FLDx(F0900_P1_S1S2_SEQUENTIAL)
+#define F0900_P1_INFINITE_RELOCK 0xf4150010
/*P1_DMDISTATE*/
-#define R0900_P1_DMDISTATE 0xf416
-#define F0900_P1_I2C_NORESETDMODE 0xf4160080
-#define F0900_P1_FORCE_ETAPED 0xf4160040
-#define F0900_P1_SDMDRST_DIRCLK 0xf4160020
-#define F0900_P1_I2C_DEMOD_MODE 0xf416001f
+#define R0900_P1_DMDISTATE 0xf416
+#define DMDISTATE REGx(R0900_P1_DMDISTATE)
+#define F0900_P1_I2C_DEMOD_MODE 0xf416001f
+#define DEMOD_MODE FLDx(F0900_P1_I2C_DEMOD_MODE)
/*P1_DMDT0M*/
-#define R0900_P1_DMDT0M 0xf417
-#define F0900_P1_DMDT0_MIN 0xf41700ff
+#define R0900_P1_DMDT0M 0xf417
+#define DMDT0M REGx(R0900_P1_DMDT0M)
+#define F0900_P1_DMDT0_MIN 0xf41700ff
/*P1_DMDSTATE*/
-#define R0900_P1_DMDSTATE 0xf41b
-#define F0900_P1_DEMOD_LOCKED 0xf41b0080
-#define F0900_P1_HEADER_MODE 0xf41b0060
-#define F0900_P1_DEMOD_MODE 0xf41b001f
+#define R0900_P1_DMDSTATE 0xf41b
+#define DMDSTATE REGx(R0900_P1_DMDSTATE)
+#define F0900_P1_HEADER_MODE 0xf41b0060
+#define HEADER_MODE FLDx(F0900_P1_HEADER_MODE)
/*P1_DMDFLYW*/
-#define R0900_P1_DMDFLYW 0xf41c
-#define F0900_P1_I2C_IRQVAL 0xf41c00f0
-#define F0900_P1_FLYWHEEL_CPT 0xf41c000f
+#define R0900_P1_DMDFLYW 0xf41c
+#define DMDFLYW REGx(R0900_P1_DMDFLYW)
+#define F0900_P1_I2C_IRQVAL 0xf41c00f0
+#define F0900_P1_FLYWHEEL_CPT 0xf41c000f
+#define FLYWHEEL_CPT FLDx(F0900_P1_FLYWHEEL_CPT)
/*P1_DSTATUS3*/
-#define R0900_P1_DSTATUS3 0xf41d
-#define F0900_P1_CFR_ZIGZAG 0xf41d0080
-#define F0900_P1_DEMOD_CFGMODE 0xf41d0060
-#define F0900_P1_GAMMA_LOWBAUDRATE 0xf41d0010
-#define F0900_P1_RELOCK_MODE 0xf41d0008
-#define F0900_P1_DEMOD_FAIL 0xf41d0004
-#define F0900_P1_ETAPE1A_DVBXMEM 0xf41d0003
+#define R0900_P1_DSTATUS3 0xf41d
+#define DSTATUS3 REGx(R0900_P1_DSTATUS3)
+#define F0900_P1_DEMOD_CFGMODE 0xf41d0060
/*P1_DMDCFG3*/
-#define R0900_P1_DMDCFG3 0xf41e
-#define F0900_P1_DVBS1_TMGWAIT 0xf41e0080
-#define F0900_P1_NO_BWCENTERING 0xf41e0040
-#define F0900_P1_INV_SEQSRCH 0xf41e0020
-#define F0900_P1_DIS_SFRUPLOW_TRK 0xf41e0010
-#define F0900_P1_NOSTOP_FIFOFULL 0xf41e0008
-#define F0900_P1_LOCKTIME_MODE 0xf41e0007
+#define R0900_P1_DMDCFG3 0xf41e
+#define DMDCFG3 REGx(R0900_P1_DMDCFG3)
+#define F0900_P1_NOSTOP_FIFOFULL 0xf41e0008
/*P1_DMDCFG4*/
-#define R0900_P1_DMDCFG4 0xf41f
-#define F0900_P1_TUNER_NRELAUNCH 0xf41f0008
-#define F0900_P1_DIS_CLKENABLE 0xf41f0004
-#define F0900_P1_DIS_HDRDIVLOCK 0xf41f0002
-#define F0900_P1_NO_TNRWBINIT 0xf41f0001
+#define R0900_P1_DMDCFG4 0xf41f
+#define DMDCFG4 REGx(R0900_P1_DMDCFG4)
+#define F0900_P1_TUNER_NRELAUNCH 0xf41f0008
/*P1_CORRELMANT*/
-#define R0900_P1_CORRELMANT 0xf420
-#define F0900_P1_CORREL_MANT 0xf42000ff
+#define R0900_P1_CORRELMANT 0xf420
+#define CORRELMANT REGx(R0900_P1_CORRELMANT)
+#define F0900_P1_CORREL_MANT 0xf42000ff
/*P1_CORRELABS*/
-#define R0900_P1_CORRELABS 0xf421
-#define F0900_P1_CORREL_ABS 0xf42100ff
+#define R0900_P1_CORRELABS 0xf421
+#define CORRELABS REGx(R0900_P1_CORRELABS)
+#define F0900_P1_CORREL_ABS 0xf42100ff
/*P1_CORRELEXP*/
-#define R0900_P1_CORRELEXP 0xf422
-#define F0900_P1_CORREL_ABSEXP 0xf42200f0
-#define F0900_P1_CORREL_EXP 0xf422000f
+#define R0900_P1_CORRELEXP 0xf422
+#define CORRELEXP REGx(R0900_P1_CORRELEXP)
+#define F0900_P1_CORREL_ABSEXP 0xf42200f0
+#define F0900_P1_CORREL_EXP 0xf422000f
/*P1_PLHMODCOD*/
-#define R0900_P1_PLHMODCOD 0xf424
-#define F0900_P1_SPECINV_DEMOD 0xf4240080
-#define F0900_P1_PLH_MODCOD 0xf424007c
-#define F0900_P1_PLH_TYPE 0xf4240003
+#define R0900_P1_PLHMODCOD 0xf424
+#define PLHMODCOD REGx(R0900_P1_PLHMODCOD)
+#define F0900_P1_SPECINV_DEMOD 0xf4240080
+#define SPECINV_DEMOD FLDx(F0900_P1_SPECINV_DEMOD)
+#define F0900_P1_PLH_MODCOD 0xf424007c
+#define F0900_P1_PLH_TYPE 0xf4240003
-/*P1_AGCK32*/
-#define R0900_P1_AGCK32 0xf42b
-#define F0900_P1_R3ADJOFF_32APSK 0xf42b0080
-#define F0900_P1_R2ADJOFF_32APSK 0xf42b0040
-#define F0900_P1_R1ADJOFF_32APSK 0xf42b0020
-#define F0900_P1_RADJ_32APSK 0xf42b001f
+/*P1_DMDREG*/
+#define R0900_P1_DMDREG 0xf425
+#define DMDREG REGx(R0900_P1_DMDREG)
+#define F0900_P1_DECIM_PLFRAMES 0xf4250001
/*P1_AGC2O*/
-#define R0900_P1_AGC2O 0xf42c
-#define F0900_P1_AGC2REF_ADJUSTING 0xf42c0080
-#define F0900_P1_AGC2_COARSEFAST 0xf42c0040
-#define F0900_P1_AGC2_LKSQRT 0xf42c0020
-#define F0900_P1_AGC2_LKMODE 0xf42c0010
-#define F0900_P1_AGC2_LKEQUA 0xf42c0008
-#define F0900_P1_AGC2_COEF 0xf42c0007
+#define R0900_P1_AGC2O 0xf42c
+#define AGC2O REGx(R0900_P1_AGC2O)
+#define F0900_P1_AGC2_COEF 0xf42c0007
/*P1_AGC2REF*/
-#define R0900_P1_AGC2REF 0xf42d
-#define F0900_P1_AGC2_REF 0xf42d00ff
+#define R0900_P1_AGC2REF 0xf42d
+#define AGC2REF REGx(R0900_P1_AGC2REF)
+#define F0900_P1_AGC2_REF 0xf42d00ff
/*P1_AGC1ADJ*/
-#define R0900_P1_AGC1ADJ 0xf42e
-#define F0900_P1_AGC1ADJ_MANUAL 0xf42e0080
-#define F0900_P1_AGC1_ADJUSTED 0xf42e017f
+#define R0900_P1_AGC1ADJ 0xf42e
+#define AGC1ADJ REGx(R0900_P1_AGC1ADJ)
+#define F0900_P1_AGC1_ADJUSTED 0xf42e007f
/*P1_AGC2I1*/
-#define R0900_P1_AGC2I1 0xf436
-#define F0900_P1_AGC2_INTEGRATOR1 0xf43600ff
+#define R0900_P1_AGC2I1 0xf436
+#define AGC2I1 REGx(R0900_P1_AGC2I1)
+#define F0900_P1_AGC2_INTEGRATOR1 0xf43600ff
/*P1_AGC2I0*/
-#define R0900_P1_AGC2I0 0xf437
-#define F0900_P1_AGC2_INTEGRATOR0 0xf43700ff
+#define R0900_P1_AGC2I0 0xf437
+#define AGC2I0 REGx(R0900_P1_AGC2I0)
+#define F0900_P1_AGC2_INTEGRATOR0 0xf43700ff
/*P1_CARCFG*/
-#define R0900_P1_CARCFG 0xf438
-#define F0900_P1_CFRUPLOW_AUTO 0xf4380080
-#define F0900_P1_CFRUPLOW_TEST 0xf4380040
-#define F0900_P1_EN_CAR2CENTER 0xf4380020
-#define F0900_P1_CARHDR_NODIV8 0xf4380010
-#define F0900_P1_I2C_ROTA 0xf4380008
-#define F0900_P1_ROTAON 0xf4380004
-#define F0900_P1_PH_DET_ALGO 0xf4380003
+#define R0900_P1_CARCFG 0xf438
+#define CARCFG REGx(R0900_P1_CARCFG)
+#define F0900_P1_CFRUPLOW_AUTO 0xf4380080
+#define F0900_P1_CFRUPLOW_TEST 0xf4380040
+#define F0900_P1_ROTAON 0xf4380004
+#define F0900_P1_PH_DET_ALGO 0xf4380003
/*P1_ACLC*/
-#define R0900_P1_ACLC 0xf439
-#define F0900_P1_STOP_S2ALPHA 0xf43900c0
-#define F0900_P1_CAR_ALPHA_MANT 0xf4390030
-#define F0900_P1_CAR_ALPHA_EXP 0xf439000f
+#define R0900_P1_ACLC 0xf439
+#define ACLC REGx(R0900_P1_ACLC)
+#define F0900_P1_CAR_ALPHA_MANT 0xf4390030
+#define F0900_P1_CAR_ALPHA_EXP 0xf439000f
/*P1_BCLC*/
-#define R0900_P1_BCLC 0xf43a
-#define F0900_P1_STOP_S2BETA 0xf43a00c0
-#define F0900_P1_CAR_BETA_MANT 0xf43a0030
-#define F0900_P1_CAR_BETA_EXP 0xf43a000f
+#define R0900_P1_BCLC 0xf43a
+#define BCLC REGx(R0900_P1_BCLC)
+#define F0900_P1_CAR_BETA_MANT 0xf43a0030
+#define F0900_P1_CAR_BETA_EXP 0xf43a000f
/*P1_CARFREQ*/
-#define R0900_P1_CARFREQ 0xf43d
-#define F0900_P1_KC_COARSE_EXP 0xf43d00f0
-#define F0900_P1_BETA_FREQ 0xf43d000f
+#define R0900_P1_CARFREQ 0xf43d
+#define CARFREQ REGx(R0900_P1_CARFREQ)
+#define F0900_P1_KC_COARSE_EXP 0xf43d00f0
+#define F0900_P1_BETA_FREQ 0xf43d000f
/*P1_CARHDR*/
-#define R0900_P1_CARHDR 0xf43e
-#define F0900_P1_K_FREQ_HDR 0xf43e00ff
+#define R0900_P1_CARHDR 0xf43e
+#define CARHDR REGx(R0900_P1_CARHDR)
+#define F0900_P1_K_FREQ_HDR 0xf43e00ff
/*P1_LDT*/
-#define R0900_P1_LDT 0xf43f
-#define F0900_P1_CARLOCK_THRES 0xf43f01ff
+#define R0900_P1_LDT 0xf43f
+#define LDT REGx(R0900_P1_LDT)
+#define F0900_P1_CARLOCK_THRES 0xf43f01ff
/*P1_LDT2*/
-#define R0900_P1_LDT2 0xf440
-#define F0900_P1_CARLOCK_THRES2 0xf44001ff
+#define R0900_P1_LDT2 0xf440
+#define LDT2 REGx(R0900_P1_LDT2)
+#define F0900_P1_CARLOCK_THRES2 0xf44001ff
/*P1_CFRICFG*/
-#define R0900_P1_CFRICFG 0xf441
-#define F0900_P1_CFRINIT_UNVALRNG 0xf4410080
-#define F0900_P1_CFRINIT_LUNVALCPT 0xf4410040
-#define F0900_P1_CFRINIT_ABORTDBL 0xf4410020
-#define F0900_P1_CFRINIT_ABORTPRED 0xf4410010
-#define F0900_P1_CFRINIT_UNVALSKIP 0xf4410008
-#define F0900_P1_CFRINIT_CSTINC 0xf4410004
-#define F0900_P1_NEG_CFRSTEP 0xf4410001
+#define R0900_P1_CFRICFG 0xf441
+#define CFRICFG REGx(R0900_P1_CFRICFG)
+#define F0900_P1_NEG_CFRSTEP 0xf4410001
/*P1_CFRUP1*/
-#define R0900_P1_CFRUP1 0xf442
-#define F0900_P1_CFR_UP1 0xf44201ff
+#define R0900_P1_CFRUP1 0xf442
+#define CFRUP1 REGx(R0900_P1_CFRUP1)
+#define F0900_P1_CFR_UP1 0xf44201ff
+#define CFR_UP1 FLDx(F0900_P1_CFR_UP1)
/*P1_CFRUP0*/
-#define R0900_P1_CFRUP0 0xf443
-#define F0900_P1_CFR_UP0 0xf44300ff
+#define R0900_P1_CFRUP0 0xf443
+#define CFRUP0 REGx(R0900_P1_CFRUP0)
+#define F0900_P1_CFR_UP0 0xf44300ff
+#define CFR_UP0 FLDx(F0900_P1_CFR_UP0)
/*P1_CFRLOW1*/
-#define R0900_P1_CFRLOW1 0xf446
-#define F0900_P1_CFR_LOW1 0xf44601ff
+#define R0900_P1_CFRLOW1 0xf446
+#define CFRLOW1 REGx(R0900_P1_CFRLOW1)
+#define F0900_P1_CFR_LOW1 0xf44601ff
+#define CFR_LOW1 FLDx(F0900_P1_CFR_LOW1)
/*P1_CFRLOW0*/
-#define R0900_P1_CFRLOW0 0xf447
-#define F0900_P1_CFR_LOW0 0xf44700ff
+#define R0900_P1_CFRLOW0 0xf447
+#define CFRLOW0 REGx(R0900_P1_CFRLOW0)
+#define F0900_P1_CFR_LOW0 0xf44700ff
+#define CFR_LOW0 FLDx(F0900_P1_CFR_LOW0)
/*P1_CFRINIT1*/
-#define R0900_P1_CFRINIT1 0xf448
-#define F0900_P1_CFR_INIT1 0xf44801ff
+#define R0900_P1_CFRINIT1 0xf448
+#define CFRINIT1 REGx(R0900_P1_CFRINIT1)
+#define F0900_P1_CFR_INIT1 0xf44801ff
+#define CFR_INIT1 FLDx(F0900_P1_CFR_INIT1)
/*P1_CFRINIT0*/
-#define R0900_P1_CFRINIT0 0xf449
-#define F0900_P1_CFR_INIT0 0xf44900ff
+#define R0900_P1_CFRINIT0 0xf449
+#define CFRINIT0 REGx(R0900_P1_CFRINIT0)
+#define F0900_P1_CFR_INIT0 0xf44900ff
+#define CFR_INIT0 FLDx(F0900_P1_CFR_INIT0)
/*P1_CFRINC1*/
-#define R0900_P1_CFRINC1 0xf44a
-#define F0900_P1_MANUAL_CFRINC 0xf44a0080
-#define F0900_P1_CFR_INC1 0xf44a017f
+#define R0900_P1_CFRINC1 0xf44a
+#define CFRINC1 REGx(R0900_P1_CFRINC1)
+#define F0900_P1_MANUAL_CFRINC 0xf44a0080
+#define F0900_P1_CFR_INC1 0xf44a003f
/*P1_CFRINC0*/
-#define R0900_P1_CFRINC0 0xf44b
-#define F0900_P1_CFR_INC0 0xf44b00f0
+#define R0900_P1_CFRINC0 0xf44b
+#define CFRINC0 REGx(R0900_P1_CFRINC0)
+#define F0900_P1_CFR_INC0 0xf44b00f8
/*P1_CFR2*/
-#define R0900_P1_CFR2 0xf44c
-#define F0900_P1_CAR_FREQ2 0xf44c01ff
+#define R0900_P1_CFR2 0xf44c
+#define CFR2 REGx(R0900_P1_CFR2)
+#define F0900_P1_CAR_FREQ2 0xf44c01ff
+#define CAR_FREQ2 FLDx(F0900_P1_CAR_FREQ2)
/*P1_CFR1*/
-#define R0900_P1_CFR1 0xf44d
-#define F0900_P1_CAR_FREQ1 0xf44d00ff
+#define R0900_P1_CFR1 0xf44d
+#define CFR1 REGx(R0900_P1_CFR1)
+#define F0900_P1_CAR_FREQ1 0xf44d00ff
+#define CAR_FREQ1 FLDx(F0900_P1_CAR_FREQ1)
/*P1_CFR0*/
-#define R0900_P1_CFR0 0xf44e
-#define F0900_P1_CAR_FREQ0 0xf44e00ff
+#define R0900_P1_CFR0 0xf44e
+#define CFR0 REGx(R0900_P1_CFR0)
+#define F0900_P1_CAR_FREQ0 0xf44e00ff
+#define CAR_FREQ0 FLDx(F0900_P1_CAR_FREQ0)
/*P1_LDI*/
-#define R0900_P1_LDI 0xf44f
-#define F0900_P1_LOCK_DET_INTEGR 0xf44f01ff
+#define R0900_P1_LDI 0xf44f
+#define LDI REGx(R0900_P1_LDI)
+#define F0900_P1_LOCK_DET_INTEGR 0xf44f01ff
/*P1_TMGCFG*/
-#define R0900_P1_TMGCFG 0xf450
-#define F0900_P1_TMGLOCK_BETA 0xf45000c0
-#define F0900_P1_NOTMG_GROUPDELAY 0xf4500020
-#define F0900_P1_DO_TIMING_CORR 0xf4500010
-#define F0900_P1_MANUAL_SCAN 0xf450000c
-#define F0900_P1_TMG_MINFREQ 0xf4500003
+#define R0900_P1_TMGCFG 0xf450
+#define TMGCFG REGx(R0900_P1_TMGCFG)
+#define F0900_P1_TMGLOCK_BETA 0xf45000c0
+#define F0900_P1_DO_TIMING_CORR 0xf4500010
+#define F0900_P1_TMG_MINFREQ 0xf4500003
/*P1_RTC*/
-#define R0900_P1_RTC 0xf451
-#define F0900_P1_TMGALPHA_EXP 0xf45100f0
-#define F0900_P1_TMGBETA_EXP 0xf451000f
+#define R0900_P1_RTC 0xf451
+#define RTC REGx(R0900_P1_RTC)
+#define F0900_P1_TMGALPHA_EXP 0xf45100f0
+#define F0900_P1_TMGBETA_EXP 0xf451000f
/*P1_RTCS2*/
-#define R0900_P1_RTCS2 0xf452
-#define F0900_P1_TMGALPHAS2_EXP 0xf45200f0
-#define F0900_P1_TMGBETAS2_EXP 0xf452000f
+#define R0900_P1_RTCS2 0xf452
+#define RTCS2 REGx(R0900_P1_RTCS2)
+#define F0900_P1_TMGALPHAS2_EXP 0xf45200f0
+#define F0900_P1_TMGBETAS2_EXP 0xf452000f
/*P1_TMGTHRISE*/
-#define R0900_P1_TMGTHRISE 0xf453
-#define F0900_P1_TMGLOCK_THRISE 0xf45300ff
+#define R0900_P1_TMGTHRISE 0xf453
+#define TMGTHRISE REGx(R0900_P1_TMGTHRISE)
+#define F0900_P1_TMGLOCK_THRISE 0xf45300ff
/*P1_TMGTHFALL*/
-#define R0900_P1_TMGTHFALL 0xf454
-#define F0900_P1_TMGLOCK_THFALL 0xf45400ff
+#define R0900_P1_TMGTHFALL 0xf454
+#define TMGTHFALL REGx(R0900_P1_TMGTHFALL)
+#define F0900_P1_TMGLOCK_THFALL 0xf45400ff
/*P1_SFRUPRATIO*/
-#define R0900_P1_SFRUPRATIO 0xf455
-#define F0900_P1_SFR_UPRATIO 0xf45500ff
+#define R0900_P1_SFRUPRATIO 0xf455
+#define SFRUPRATIO REGx(R0900_P1_SFRUPRATIO)
+#define F0900_P1_SFR_UPRATIO 0xf45500ff
/*P1_SFRLOWRATIO*/
-#define R0900_P1_SFRLOWRATIO 0xf456
-#define F0900_P1_SFR_LOWRATIO 0xf45600ff
+#define R0900_P1_SFRLOWRATIO 0xf456
+#define F0900_P1_SFR_LOWRATIO 0xf45600ff
/*P1_KREFTMG*/
-#define R0900_P1_KREFTMG 0xf458
-#define F0900_P1_KREF_TMG 0xf45800ff
+#define R0900_P1_KREFTMG 0xf458
+#define KREFTMG REGx(R0900_P1_KREFTMG)
+#define F0900_P1_KREF_TMG 0xf45800ff
/*P1_SFRSTEP*/
-#define R0900_P1_SFRSTEP 0xf459
-#define F0900_P1_SFR_SCANSTEP 0xf45900f0
-#define F0900_P1_SFR_CENTERSTEP 0xf459000f
+#define R0900_P1_SFRSTEP 0xf459
+#define SFRSTEP REGx(R0900_P1_SFRSTEP)
+#define F0900_P1_SFR_SCANSTEP 0xf45900f0
+#define F0900_P1_SFR_CENTERSTEP 0xf459000f
/*P1_TMGCFG2*/
-#define R0900_P1_TMGCFG2 0xf45a
-#define F0900_P1_DIS_AUTOSAMP 0xf45a0008
-#define F0900_P1_SCANINIT_QUART 0xf45a0004
-#define F0900_P1_NOTMG_DVBS1DERAT 0xf45a0002
-#define F0900_P1_SFRRATIO_FINE 0xf45a0001
+#define R0900_P1_TMGCFG2 0xf45a
+#define TMGCFG2 REGx(R0900_P1_TMGCFG2)
+#define F0900_P1_SFRRATIO_FINE 0xf45a0001
+
+/*P1_KREFTMG2*/
+#define R0900_P1_KREFTMG2 0xf45b
+#define KREFTMG2 REGx(R0900_P1_KREFTMG2)
+#define F0900_P1_KREF_TMG2 0xf45b00ff
/*P1_SFRINIT1*/
-#define R0900_P1_SFRINIT1 0xf45e
-#define F0900_P1_SFR_INIT1 0xf45e00ff
+#define R0900_P1_SFRINIT1 0xf45e
+#define SFRINIT1 REGx(R0900_P1_SFRINIT1)
+#define F0900_P1_SFR_INIT1 0xf45e007f
/*P1_SFRINIT0*/
-#define R0900_P1_SFRINIT0 0xf45f
-#define F0900_P1_SFR_INIT0 0xf45f00ff
+#define R0900_P1_SFRINIT0 0xf45f
+#define SFRINIT0 REGx(R0900_P1_SFRINIT0)
+#define F0900_P1_SFR_INIT0 0xf45f00ff
/*P1_SFRUP1*/
-#define R0900_P1_SFRUP1 0xf460
-#define F0900_P1_AUTO_GUP 0xf4600080
-#define F0900_P1_SYMB_FREQ_UP1 0xf460007f
+#define R0900_P1_SFRUP1 0xf460
+#define SFRUP1 REGx(R0900_P1_SFRUP1)
+#define F0900_P1_AUTO_GUP 0xf4600080
+#define AUTO_GUP FLDx(F0900_P1_AUTO_GUP)
+#define F0900_P1_SYMB_FREQ_UP1 0xf460007f
/*P1_SFRUP0*/
-#define R0900_P1_SFRUP0 0xf461
-#define F0900_P1_SYMB_FREQ_UP0 0xf46100ff
+#define R0900_P1_SFRUP0 0xf461
+#define SFRUP0 REGx(R0900_P1_SFRUP0)
+#define F0900_P1_SYMB_FREQ_UP0 0xf46100ff
/*P1_SFRLOW1*/
-#define R0900_P1_SFRLOW1 0xf462
-#define F0900_P1_AUTO_GLOW 0xf4620080
-#define F0900_P1_SYMB_FREQ_LOW1 0xf462007f
+#define R0900_P1_SFRLOW1 0xf462
+#define SFRLOW1 REGx(R0900_P1_SFRLOW1)
+#define F0900_P1_AUTO_GLOW 0xf4620080
+#define AUTO_GLOW FLDx(F0900_P1_AUTO_GLOW)
+#define F0900_P1_SYMB_FREQ_LOW1 0xf462007f
/*P1_SFRLOW0*/
-#define R0900_P1_SFRLOW0 0xf463
-#define F0900_P1_SYMB_FREQ_LOW0 0xf46300ff
+#define R0900_P1_SFRLOW0 0xf463
+#define SFRLOW0 REGx(R0900_P1_SFRLOW0)
+#define F0900_P1_SYMB_FREQ_LOW0 0xf46300ff
/*P1_SFR3*/
-#define R0900_P1_SFR3 0xf464
-#define F0900_P1_SYMB_FREQ3 0xf46400ff
+#define R0900_P1_SFR3 0xf464
+#define SFR3 REGx(R0900_P1_SFR3)
+#define F0900_P1_SYMB_FREQ3 0xf46400ff
+#define SYMB_FREQ3 FLDx(F0900_P1_SYMB_FREQ3)
/*P1_SFR2*/
-#define R0900_P1_SFR2 0xf465
-#define F0900_P1_SYMB_FREQ2 0xf46500ff
+#define R0900_P1_SFR2 0xf465
+#define SFR2 REGx(R0900_P1_SFR2)
+#define F0900_P1_SYMB_FREQ2 0xf46500ff
+#define SYMB_FREQ2 FLDx(F0900_P1_SYMB_FREQ2)
/*P1_SFR1*/
-#define R0900_P1_SFR1 0xf466
-#define F0900_P1_SYMB_FREQ1 0xf46600ff
+#define R0900_P1_SFR1 0xf466
+#define SFR1 REGx(R0900_P1_SFR1)
+#define F0900_P1_SYMB_FREQ1 0xf46600ff
+#define SYMB_FREQ1 FLDx(F0900_P1_SYMB_FREQ1)
/*P1_SFR0*/
-#define R0900_P1_SFR0 0xf467
-#define F0900_P1_SYMB_FREQ0 0xf46700ff
+#define R0900_P1_SFR0 0xf467
+#define SFR0 REGx(R0900_P1_SFR0)
+#define F0900_P1_SYMB_FREQ0 0xf46700ff
+#define SYMB_FREQ0 FLDx(F0900_P1_SYMB_FREQ0)
/*P1_TMGREG2*/
-#define R0900_P1_TMGREG2 0xf468
-#define F0900_P1_TMGREG2 0xf46800ff
+#define R0900_P1_TMGREG2 0xf468
+#define TMGREG2 REGx(R0900_P1_TMGREG2)
+#define F0900_P1_TMGREG2 0xf46800ff
/*P1_TMGREG1*/
-#define R0900_P1_TMGREG1 0xf469
-#define F0900_P1_TMGREG1 0xf46900ff
+#define R0900_P1_TMGREG1 0xf469
+#define TMGREG1 REGx(R0900_P1_TMGREG1)
+#define F0900_P1_TMGREG1 0xf46900ff
/*P1_TMGREG0*/
-#define R0900_P1_TMGREG0 0xf46a
-#define F0900_P1_TMGREG0 0xf46a00ff
+#define R0900_P1_TMGREG0 0xf46a
+#define TMGREG0 REGx(R0900_P1_TMGREG0)
+#define F0900_P1_TMGREG0 0xf46a00ff
/*P1_TMGLOCK1*/
-#define R0900_P1_TMGLOCK1 0xf46b
-#define F0900_P1_TMGLOCK_LEVEL1 0xf46b01ff
+#define R0900_P1_TMGLOCK1 0xf46b
+#define TMGLOCK1 REGx(R0900_P1_TMGLOCK1)
+#define F0900_P1_TMGLOCK_LEVEL1 0xf46b01ff
/*P1_TMGLOCK0*/
-#define R0900_P1_TMGLOCK0 0xf46c
-#define F0900_P1_TMGLOCK_LEVEL0 0xf46c00ff
+#define R0900_P1_TMGLOCK0 0xf46c
+#define TMGLOCK0 REGx(R0900_P1_TMGLOCK0)
+#define F0900_P1_TMGLOCK_LEVEL0 0xf46c00ff
/*P1_TMGOBS*/
-#define R0900_P1_TMGOBS 0xf46d
-#define F0900_P1_ROLLOFF_STATUS 0xf46d00c0
-#define F0900_P1_SCAN_SIGN 0xf46d0030
-#define F0900_P1_TMG_SCANNING 0xf46d0008
-#define F0900_P1_CHCENTERING_MODE 0xf46d0004
-#define F0900_P1_TMG_SCANFAIL 0xf46d0002
+#define R0900_P1_TMGOBS 0xf46d
+#define TMGOBS REGx(R0900_P1_TMGOBS)
+#define F0900_P1_ROLLOFF_STATUS 0xf46d00c0
+#define ROLLOFF_STATUS FLDx(F0900_P1_ROLLOFF_STATUS)
/*P1_EQUALCFG*/
-#define R0900_P1_EQUALCFG 0xf46f
-#define F0900_P1_NOTMG_NEGALWAIT 0xf46f0080
-#define F0900_P1_EQUAL_ON 0xf46f0040
-#define F0900_P1_SEL_EQUALCOR 0xf46f0038
-#define F0900_P1_MU_EQUALDFE 0xf46f0007
+#define R0900_P1_EQUALCFG 0xf46f
+#define EQUALCFG REGx(R0900_P1_EQUALCFG)
+#define F0900_P1_EQUAL_ON 0xf46f0040
+#define F0900_P1_MU_EQUALDFE 0xf46f0007
/*P1_EQUAI1*/
-#define R0900_P1_EQUAI1 0xf470
-#define F0900_P1_EQUA_ACCI1 0xf47001ff
+#define R0900_P1_EQUAI1 0xf470
+#define EQUAI1 REGx(R0900_P1_EQUAI1)
+#define F0900_P1_EQUA_ACCI1 0xf47001ff
/*P1_EQUAQ1*/
-#define R0900_P1_EQUAQ1 0xf471
-#define F0900_P1_EQUA_ACCQ1 0xf47101ff
+#define R0900_P1_EQUAQ1 0xf471
+#define EQUAQ1 REGx(R0900_P1_EQUAQ1)
+#define F0900_P1_EQUA_ACCQ1 0xf47101ff
/*P1_EQUAI2*/
-#define R0900_P1_EQUAI2 0xf472
-#define F0900_P1_EQUA_ACCI2 0xf47201ff
+#define R0900_P1_EQUAI2 0xf472
+#define EQUAI2 REGx(R0900_P1_EQUAI2)
+#define F0900_P1_EQUA_ACCI2 0xf47201ff
/*P1_EQUAQ2*/
-#define R0900_P1_EQUAQ2 0xf473
-#define F0900_P1_EQUA_ACCQ2 0xf47301ff
+#define R0900_P1_EQUAQ2 0xf473
+#define EQUAQ2 REGx(R0900_P1_EQUAQ2)
+#define F0900_P1_EQUA_ACCQ2 0xf47301ff
/*P1_EQUAI3*/
-#define R0900_P1_EQUAI3 0xf474
-#define F0900_P1_EQUA_ACCI3 0xf47401ff
+#define R0900_P1_EQUAI3 0xf474
+#define EQUAI3 REGx(R0900_P1_EQUAI3)
+#define F0900_P1_EQUA_ACCI3 0xf47401ff
/*P1_EQUAQ3*/
-#define R0900_P1_EQUAQ3 0xf475
-#define F0900_P1_EQUA_ACCQ3 0xf47501ff
+#define R0900_P1_EQUAQ3 0xf475
+#define EQUAQ3 REGx(R0900_P1_EQUAQ3)
+#define F0900_P1_EQUA_ACCQ3 0xf47501ff
/*P1_EQUAI4*/
-#define R0900_P1_EQUAI4 0xf476
-#define F0900_P1_EQUA_ACCI4 0xf47601ff
+#define R0900_P1_EQUAI4 0xf476
+#define EQUAI4 REGx(R0900_P1_EQUAI4)
+#define F0900_P1_EQUA_ACCI4 0xf47601ff
/*P1_EQUAQ4*/
-#define R0900_P1_EQUAQ4 0xf477
-#define F0900_P1_EQUA_ACCQ4 0xf47701ff
+#define R0900_P1_EQUAQ4 0xf477
+#define EQUAQ4 REGx(R0900_P1_EQUAQ4)
+#define F0900_P1_EQUA_ACCQ4 0xf47701ff
/*P1_EQUAI5*/
-#define R0900_P1_EQUAI5 0xf478
-#define F0900_P1_EQUA_ACCI5 0xf47801ff
+#define R0900_P1_EQUAI5 0xf478
+#define EQUAI5 REGx(R0900_P1_EQUAI5)
+#define F0900_P1_EQUA_ACCI5 0xf47801ff
/*P1_EQUAQ5*/
-#define R0900_P1_EQUAQ5 0xf479
-#define F0900_P1_EQUA_ACCQ5 0xf47901ff
+#define R0900_P1_EQUAQ5 0xf479
+#define EQUAQ5 REGx(R0900_P1_EQUAQ5)
+#define F0900_P1_EQUA_ACCQ5 0xf47901ff
/*P1_EQUAI6*/
-#define R0900_P1_EQUAI6 0xf47a
-#define F0900_P1_EQUA_ACCI6 0xf47a01ff
+#define R0900_P1_EQUAI6 0xf47a
+#define EQUAI6 REGx(R0900_P1_EQUAI6)
+#define F0900_P1_EQUA_ACCI6 0xf47a01ff
/*P1_EQUAQ6*/
-#define R0900_P1_EQUAQ6 0xf47b
-#define F0900_P1_EQUA_ACCQ6 0xf47b01ff
+#define R0900_P1_EQUAQ6 0xf47b
+#define EQUAQ6 REGx(R0900_P1_EQUAQ6)
+#define F0900_P1_EQUA_ACCQ6 0xf47b01ff
/*P1_EQUAI7*/
-#define R0900_P1_EQUAI7 0xf47c
-#define F0900_P1_EQUA_ACCI7 0xf47c01ff
+#define R0900_P1_EQUAI7 0xf47c
+#define EQUAI7 REGx(R0900_P1_EQUAI7)
+#define F0900_P1_EQUA_ACCI7 0xf47c01ff
/*P1_EQUAQ7*/
-#define R0900_P1_EQUAQ7 0xf47d
-#define F0900_P1_EQUA_ACCQ7 0xf47d01ff
+#define R0900_P1_EQUAQ7 0xf47d
+#define EQUAQ7 REGx(R0900_P1_EQUAQ7)
+#define F0900_P1_EQUA_ACCQ7 0xf47d01ff
/*P1_EQUAI8*/
-#define R0900_P1_EQUAI8 0xf47e
-#define F0900_P1_EQUA_ACCI8 0xf47e01ff
+#define R0900_P1_EQUAI8 0xf47e
+#define EQUAI8 REGx(R0900_P1_EQUAI8)
+#define F0900_P1_EQUA_ACCI8 0xf47e01ff
/*P1_EQUAQ8*/
-#define R0900_P1_EQUAQ8 0xf47f
-#define F0900_P1_EQUA_ACCQ8 0xf47f01ff
+#define R0900_P1_EQUAQ8 0xf47f
+#define EQUAQ8 REGx(R0900_P1_EQUAQ8)
+#define F0900_P1_EQUA_ACCQ8 0xf47f01ff
/*P1_NNOSDATAT1*/
-#define R0900_P1_NNOSDATAT1 0xf480
-#define F0900_P1_NOSDATAT_NORMED1 0xf48000ff
+#define R0900_P1_NNOSDATAT1 0xf480
+#define NNOSDATAT1 REGx(R0900_P1_NNOSDATAT1)
+#define F0900_P1_NOSDATAT_NORMED1 0xf48000ff
+#define NOSDATAT_NORMED1 FLDx(F0900_P1_NOSDATAT_NORMED1)
/*P1_NNOSDATAT0*/
-#define R0900_P1_NNOSDATAT0 0xf481
-#define F0900_P1_NOSDATAT_NORMED0 0xf48100ff
+#define R0900_P1_NNOSDATAT0 0xf481
+#define NNOSDATAT0 REGx(R0900_P1_NNOSDATAT0)
+#define F0900_P1_NOSDATAT_NORMED0 0xf48100ff
+#define NOSDATAT_NORMED0 FLDx(F0900_P1_NOSDATAT_NORMED0)
/*P1_NNOSDATA1*/
-#define R0900_P1_NNOSDATA1 0xf482
-#define F0900_P1_NOSDATA_NORMED1 0xf48200ff
+#define R0900_P1_NNOSDATA1 0xf482
+#define NNOSDATA1 REGx(R0900_P1_NNOSDATA1)
+#define F0900_P1_NOSDATA_NORMED1 0xf48200ff
/*P1_NNOSDATA0*/
-#define R0900_P1_NNOSDATA0 0xf483
-#define F0900_P1_NOSDATA_NORMED0 0xf48300ff
+#define R0900_P1_NNOSDATA0 0xf483
+#define NNOSDATA0 REGx(R0900_P1_NNOSDATA0)
+#define F0900_P1_NOSDATA_NORMED0 0xf48300ff
/*P1_NNOSPLHT1*/
-#define R0900_P1_NNOSPLHT1 0xf484
-#define F0900_P1_NOSPLHT_NORMED1 0xf48400ff
+#define R0900_P1_NNOSPLHT1 0xf484
+#define NNOSPLHT1 REGx(R0900_P1_NNOSPLHT1)
+#define F0900_P1_NOSPLHT_NORMED1 0xf48400ff
+#define NOSPLHT_NORMED1 FLDx(F0900_P1_NOSPLHT_NORMED1)
/*P1_NNOSPLHT0*/
-#define R0900_P1_NNOSPLHT0 0xf485
-#define F0900_P1_NOSPLHT_NORMED0 0xf48500ff
+#define R0900_P1_NNOSPLHT0 0xf485
+#define NNOSPLHT0 REGx(R0900_P1_NNOSPLHT0)
+#define F0900_P1_NOSPLHT_NORMED0 0xf48500ff
+#define NOSPLHT_NORMED0 FLDx(F0900_P1_NOSPLHT_NORMED0)
/*P1_NNOSPLH1*/
-#define R0900_P1_NNOSPLH1 0xf486
-#define F0900_P1_NOSPLH_NORMED1 0xf48600ff
+#define R0900_P1_NNOSPLH1 0xf486
+#define NNOSPLH1 REGx(R0900_P1_NNOSPLH1)
+#define F0900_P1_NOSPLH_NORMED1 0xf48600ff
/*P1_NNOSPLH0*/
-#define R0900_P1_NNOSPLH0 0xf487
-#define F0900_P1_NOSPLH_NORMED0 0xf48700ff
+#define R0900_P1_NNOSPLH0 0xf487
+#define NNOSPLH0 REGx(R0900_P1_NNOSPLH0)
+#define F0900_P1_NOSPLH_NORMED0 0xf48700ff
/*P1_NOSDATAT1*/
-#define R0900_P1_NOSDATAT1 0xf488
-#define F0900_P1_NOSDATAT_UNNORMED1 0xf48800ff
+#define R0900_P1_NOSDATAT1 0xf488
+#define NOSDATAT1 REGx(R0900_P1_NOSDATAT1)
+#define F0900_P1_NOSDATAT_UNNORMED1 0xf48800ff
/*P1_NOSDATAT0*/
-#define R0900_P1_NOSDATAT0 0xf489
-#define F0900_P1_NOSDATAT_UNNORMED0 0xf48900ff
+#define R0900_P1_NOSDATAT0 0xf489
+#define NOSDATAT0 REGx(R0900_P1_NOSDATAT0)
+#define F0900_P1_NOSDATAT_UNNORMED0 0xf48900ff
/*P1_NOSDATA1*/
-#define R0900_P1_NOSDATA1 0xf48a
-#define F0900_P1_NOSDATA_UNNORMED1 0xf48a00ff
+#define R0900_P1_NOSDATA1 0xf48a
+#define NOSDATA1 REGx(R0900_P1_NOSDATA1)
+#define F0900_P1_NOSDATA_UNNORMED1 0xf48a00ff
/*P1_NOSDATA0*/
-#define R0900_P1_NOSDATA0 0xf48b
-#define F0900_P1_NOSDATA_UNNORMED0 0xf48b00ff
+#define R0900_P1_NOSDATA0 0xf48b
+#define NOSDATA0 REGx(R0900_P1_NOSDATA0)
+#define F0900_P1_NOSDATA_UNNORMED0 0xf48b00ff
/*P1_NOSPLHT1*/
-#define R0900_P1_NOSPLHT1 0xf48c
-#define F0900_P1_NOSPLHT_UNNORMED1 0xf48c00ff
+#define R0900_P1_NOSPLHT1 0xf48c
+#define NOSPLHT1 REGx(R0900_P1_NOSPLHT1)
+#define F0900_P1_NOSPLHT_UNNORMED1 0xf48c00ff
/*P1_NOSPLHT0*/
-#define R0900_P1_NOSPLHT0 0xf48d
-#define F0900_P1_NOSPLHT_UNNORMED0 0xf48d00ff
+#define R0900_P1_NOSPLHT0 0xf48d
+#define NOSPLHT0 REGx(R0900_P1_NOSPLHT0)
+#define F0900_P1_NOSPLHT_UNNORMED0 0xf48d00ff
/*P1_NOSPLH1*/
-#define R0900_P1_NOSPLH1 0xf48e
-#define F0900_P1_NOSPLH_UNNORMED1 0xf48e00ff
+#define R0900_P1_NOSPLH1 0xf48e
+#define NOSPLH1 REGx(R0900_P1_NOSPLH1)
+#define F0900_P1_NOSPLH_UNNORMED1 0xf48e00ff
/*P1_NOSPLH0*/
-#define R0900_P1_NOSPLH0 0xf48f
-#define F0900_P1_NOSPLH_UNNORMED0 0xf48f00ff
+#define R0900_P1_NOSPLH0 0xf48f
+#define NOSPLH0 REGx(R0900_P1_NOSPLH0)
+#define F0900_P1_NOSPLH_UNNORMED0 0xf48f00ff
/*P1_CAR2CFG*/
-#define R0900_P1_CAR2CFG 0xf490
-#define F0900_P1_DESCRAMB_OFF 0xf4900080
-#define F0900_P1_PN4_SELECT 0xf4900040
-#define F0900_P1_CFR2_STOPDVBS1 0xf4900020
-#define F0900_P1_STOP_CFR2UPDATE 0xf4900010
-#define F0900_P1_STOP_NCO2UPDATE 0xf4900008
-#define F0900_P1_ROTA2ON 0xf4900004
-#define F0900_P1_PH_DET_ALGO2 0xf4900003
+#define R0900_P1_CAR2CFG 0xf490
+#define CAR2CFG REGx(R0900_P1_CAR2CFG)
+#define F0900_P1_CARRIER3_DISABLE 0xf4900040
+#define F0900_P1_ROTA2ON 0xf4900004
+#define F0900_P1_PH_DET_ALGO2 0xf4900003
-/*P1_ACLC2*/
-#define R0900_P1_ACLC2 0xf491
-#define F0900_P1_CAR2_PUNCT_ADERAT 0xf4910040
-#define F0900_P1_CAR2_ALPHA_MANT 0xf4910030
-#define F0900_P1_CAR2_ALPHA_EXP 0xf491000f
-
-/*P1_BCLC2*/
-#define R0900_P1_BCLC2 0xf492
-#define F0900_P1_DVBS2_NIP 0xf4920080
-#define F0900_P1_CAR2_PUNCT_BDERAT 0xf4920040
-#define F0900_P1_CAR2_BETA_MANT 0xf4920030
-#define F0900_P1_CAR2_BETA_EXP 0xf492000f
+/*P1_CFR2CFR1*/
+#define R0900_P1_CFR2CFR1 0xf491
+#define CFR2CFR1 REGx(R0900_P1_CFR2CFR1)
+#define F0900_P1_CFR2TOCFR1_DVBS1 0xf49100c0
+#define F0900_P1_EN_S2CAR2CENTER 0xf4910020
+#define F0900_P1_DIS_BCHERRCFR2 0xf4910010
+#define F0900_P1_CFR2TOCFR1_BETA 0xf4910007
/*P1_CFR22*/
-#define R0900_P1_CFR22 0xf493
-#define F0900_P1_CAR2_FREQ2 0xf49301ff
+#define R0900_P1_CFR22 0xf493
+#define CFR22 REGx(R0900_P1_CFR22)
+#define F0900_P1_CAR2_FREQ2 0xf49301ff
/*P1_CFR21*/
-#define R0900_P1_CFR21 0xf494
-#define F0900_P1_CAR2_FREQ1 0xf49400ff
+#define R0900_P1_CFR21 0xf494
+#define CFR21 REGx(R0900_P1_CFR21)
+#define F0900_P1_CAR2_FREQ1 0xf49400ff
/*P1_CFR20*/
-#define R0900_P1_CFR20 0xf495
-#define F0900_P1_CAR2_FREQ0 0xf49500ff
+#define R0900_P1_CFR20 0xf495
+#define CFR20 REGx(R0900_P1_CFR20)
+#define F0900_P1_CAR2_FREQ0 0xf49500ff
/*P1_ACLC2S2Q*/
-#define R0900_P1_ACLC2S2Q 0xf497
-#define F0900_P1_ENAB_SPSKSYMB 0xf4970080
-#define F0900_P1_CAR2S2_QADERAT 0xf4970040
-#define F0900_P1_CAR2S2_Q_ALPH_M 0xf4970030
-#define F0900_P1_CAR2S2_Q_ALPH_E 0xf497000f
+#define R0900_P1_ACLC2S2Q 0xf497
+#define ACLC2S2Q REGx(R0900_P1_ACLC2S2Q)
+#define F0900_P1_ENAB_SPSKSYMB 0xf4970080
+#define F0900_P1_CAR2S2_Q_ALPH_M 0xf4970030
+#define F0900_P1_CAR2S2_Q_ALPH_E 0xf497000f
/*P1_ACLC2S28*/
-#define R0900_P1_ACLC2S28 0xf498
-#define F0900_P1_OLDI3Q_MODE 0xf4980080
-#define F0900_P1_CAR2S2_8ADERAT 0xf4980040
-#define F0900_P1_CAR2S2_8_ALPH_M 0xf4980030
-#define F0900_P1_CAR2S2_8_ALPH_E 0xf498000f
+#define R0900_P1_ACLC2S28 0xf498
+#define ACLC2S28 REGx(R0900_P1_ACLC2S28)
+#define F0900_P1_OLDI3Q_MODE 0xf4980080
+#define F0900_P1_CAR2S2_8_ALPH_M 0xf4980030
+#define F0900_P1_CAR2S2_8_ALPH_E 0xf498000f
/*P1_ACLC2S216A*/
-#define R0900_P1_ACLC2S216A 0xf499
-#define F0900_P1_CAR2S2_16ADERAT 0xf4990040
-#define F0900_P1_CAR2S2_16A_ALPH_M 0xf4990030
-#define F0900_P1_CAR2S2_16A_ALPH_E 0xf499000f
+#define R0900_P1_ACLC2S216A 0xf499
+#define ACLC2S216A REGx(R0900_P1_ACLC2S216A)
+#define F0900_P1_DIS_C3STOPA2 0xf4990080
+#define F0900_P1_CAR2S2_16ADERAT 0xf4990040
+#define F0900_P1_CAR2S2_16A_ALPH_M 0xf4990030
+#define F0900_P1_CAR2S2_16A_ALPH_E 0xf499000f
/*P1_ACLC2S232A*/
-#define R0900_P1_ACLC2S232A 0xf49a
-#define F0900_P1_CAR2S2_32ADERAT 0xf49a0040
-#define F0900_P1_CAR2S2_32A_ALPH_M 0xf49a0030
-#define F0900_P1_CAR2S2_32A_ALPH_E 0xf49a000f
+#define R0900_P1_ACLC2S232A 0xf49a
+#define ACLC2S232A REGx(R0900_P1_ACLC2S232A)
+#define F0900_P1_CAR2S2_32ADERAT 0xf49a0040
+#define F0900_P1_CAR2S2_32A_ALPH_M 0xf49a0030
+#define F0900_P1_CAR2S2_32A_ALPH_E 0xf49a000f
/*P1_BCLC2S2Q*/
-#define R0900_P1_BCLC2S2Q 0xf49c
-#define F0900_P1_DVBS2S2Q_NIP 0xf49c0080
-#define F0900_P1_CAR2S2_QBDERAT 0xf49c0040
-#define F0900_P1_CAR2S2_Q_BETA_M 0xf49c0030
-#define F0900_P1_CAR2S2_Q_BETA_E 0xf49c000f
+#define R0900_P1_BCLC2S2Q 0xf49c
+#define BCLC2S2Q REGx(R0900_P1_BCLC2S2Q)
+#define F0900_P1_CAR2S2_Q_BETA_M 0xf49c0030
+#define F0900_P1_CAR2S2_Q_BETA_E 0xf49c000f
/*P1_BCLC2S28*/
-#define R0900_P1_BCLC2S28 0xf49d
-#define F0900_P1_DVBS2S28_NIP 0xf49d0080
-#define F0900_P1_CAR2S2_8BDERAT 0xf49d0040
-#define F0900_P1_CAR2S2_8_BETA_M 0xf49d0030
-#define F0900_P1_CAR2S2_8_BETA_E 0xf49d000f
+#define R0900_P1_BCLC2S28 0xf49d
+#define BCLC2S28 REGx(R0900_P1_BCLC2S28)
+#define F0900_P1_CAR2S2_8_BETA_M 0xf49d0030
+#define F0900_P1_CAR2S2_8_BETA_E 0xf49d000f
/*P1_BCLC2S216A*/
-#define R0900_P1_BCLC2S216A 0xf49e
-#define F0900_P1_DVBS2S216A_NIP 0xf49e0080
-#define F0900_P1_CAR2S2_16BDERAT 0xf49e0040
-#define F0900_P1_CAR2S2_16A_BETA_M 0xf49e0030
-#define F0900_P1_CAR2S2_16A_BETA_E 0xf49e000f
+#define R0900_P1_BCLC2S216A 0xf49e
+#define BCLC2S216A REGx(R0900_P1_BCLC2S216A)
/*P1_BCLC2S232A*/
-#define R0900_P1_BCLC2S232A 0xf49f
-#define F0900_P1_DVBS2S232A_NIP 0xf49f0080
-#define F0900_P1_CAR2S2_32BDERAT 0xf49f0040
-#define F0900_P1_CAR2S2_32A_BETA_M 0xf49f0030
-#define F0900_P1_CAR2S2_32A_BETA_E 0xf49f000f
+#define R0900_P1_BCLC2S232A 0xf49f
+#define BCLC2S232A REGx(R0900_P1_BCLC2S232A)
/*P1_PLROOT2*/
-#define R0900_P1_PLROOT2 0xf4ac
-#define F0900_P1_SHORTFR_DISABLE 0xf4ac0080
-#define F0900_P1_LONGFR_DISABLE 0xf4ac0040
-#define F0900_P1_DUMMYPL_DISABLE 0xf4ac0020
-#define F0900_P1_SHORTFR_AVOID 0xf4ac0010
-#define F0900_P1_PLSCRAMB_MODE 0xf4ac000c
-#define F0900_P1_PLSCRAMB_ROOT2 0xf4ac0003
+#define R0900_P1_PLROOT2 0xf4ac
+#define PLROOT2 REGx(R0900_P1_PLROOT2)
+#define F0900_P1_PLSCRAMB_MODE 0xf4ac000c
+#define F0900_P1_PLSCRAMB_ROOT2 0xf4ac0003
/*P1_PLROOT1*/
-#define R0900_P1_PLROOT1 0xf4ad
-#define F0900_P1_PLSCRAMB_ROOT1 0xf4ad00ff
+#define R0900_P1_PLROOT1 0xf4ad
+#define PLROOT1 REGx(R0900_P1_PLROOT1)
+#define F0900_P1_PLSCRAMB_ROOT1 0xf4ad00ff
/*P1_PLROOT0*/
-#define R0900_P1_PLROOT0 0xf4ae
-#define F0900_P1_PLSCRAMB_ROOT0 0xf4ae00ff
+#define R0900_P1_PLROOT0 0xf4ae
+#define PLROOT0 REGx(R0900_P1_PLROOT0)
+#define F0900_P1_PLSCRAMB_ROOT0 0xf4ae00ff
/*P1_MODCODLST0*/
-#define R0900_P1_MODCODLST0 0xf4b0
-#define F0900_P1_EN_TOKEN31 0xf4b00080
-#define F0900_P1_SYNCTAG_SELECT 0xf4b00040
-#define F0900_P1_MODCODRQ_MODE 0xf4b00030
+#define R0900_P1_MODCODLST0 0xf4b0
+#define MODCODLST0 REGx(R0900_P1_MODCODLST0)
/*P1_MODCODLST1*/
-#define R0900_P1_MODCODLST1 0xf4b1
-#define F0900_P1_DIS_MODCOD29 0xf4b100f0
-#define F0900_P1_DIS_32PSK_9_10 0xf4b1000f
+#define R0900_P1_MODCODLST1 0xf4b1
+#define MODCODLST1 REGx(R0900_P1_MODCODLST1)
+#define F0900_P1_DIS_MODCOD29 0xf4b100f0
+#define F0900_P1_DIS_32PSK_9_10 0xf4b1000f
/*P1_MODCODLST2*/
-#define R0900_P1_MODCODLST2 0xf4b2
-#define F0900_P1_DIS_32PSK_8_9 0xf4b200f0
-#define F0900_P1_DIS_32PSK_5_6 0xf4b2000f
+#define R0900_P1_MODCODLST2 0xf4b2
+#define MODCODLST2 REGx(R0900_P1_MODCODLST2)
+#define F0900_P1_DIS_32PSK_8_9 0xf4b200f0
+#define F0900_P1_DIS_32PSK_5_6 0xf4b2000f
/*P1_MODCODLST3*/
-#define R0900_P1_MODCODLST3 0xf4b3
-#define F0900_P1_DIS_32PSK_4_5 0xf4b300f0
-#define F0900_P1_DIS_32PSK_3_4 0xf4b3000f
+#define R0900_P1_MODCODLST3 0xf4b3
+#define MODCODLST3 REGx(R0900_P1_MODCODLST3)
+#define F0900_P1_DIS_32PSK_4_5 0xf4b300f0
+#define F0900_P1_DIS_32PSK_3_4 0xf4b3000f
/*P1_MODCODLST4*/
-#define R0900_P1_MODCODLST4 0xf4b4
-#define F0900_P1_DIS_16PSK_9_10 0xf4b400f0
-#define F0900_P1_DIS_16PSK_8_9 0xf4b4000f
+#define R0900_P1_MODCODLST4 0xf4b4
+#define MODCODLST4 REGx(R0900_P1_MODCODLST4)
+#define F0900_P1_DIS_16PSK_9_10 0xf4b400f0
+#define F0900_P1_DIS_16PSK_8_9 0xf4b4000f
/*P1_MODCODLST5*/
-#define R0900_P1_MODCODLST5 0xf4b5
-#define F0900_P1_DIS_16PSK_5_6 0xf4b500f0
-#define F0900_P1_DIS_16PSK_4_5 0xf4b5000f
+#define R0900_P1_MODCODLST5 0xf4b5
+#define MODCODLST5 REGx(R0900_P1_MODCODLST5)
+#define F0900_P1_DIS_16PSK_5_6 0xf4b500f0
+#define F0900_P1_DIS_16PSK_4_5 0xf4b5000f
/*P1_MODCODLST6*/
-#define R0900_P1_MODCODLST6 0xf4b6
-#define F0900_P1_DIS_16PSK_3_4 0xf4b600f0
-#define F0900_P1_DIS_16PSK_2_3 0xf4b6000f
+#define R0900_P1_MODCODLST6 0xf4b6
+#define MODCODLST6 REGx(R0900_P1_MODCODLST6)
+#define F0900_P1_DIS_16PSK_3_4 0xf4b600f0
+#define F0900_P1_DIS_16PSK_2_3 0xf4b6000f
/*P1_MODCODLST7*/
-#define R0900_P1_MODCODLST7 0xf4b7
-#define F0900_P1_DIS_8P_9_10 0xf4b700f0
-#define F0900_P1_DIS_8P_8_9 0xf4b7000f
+#define R0900_P1_MODCODLST7 0xf4b7
+#define MODCODLST7 REGx(R0900_P1_MODCODLST7)
+#define F0900_P1_DIS_8P_9_10 0xf4b700f0
+#define F0900_P1_DIS_8P_8_9 0xf4b7000f
/*P1_MODCODLST8*/
-#define R0900_P1_MODCODLST8 0xf4b8
-#define F0900_P1_DIS_8P_5_6 0xf4b800f0
-#define F0900_P1_DIS_8P_3_4 0xf4b8000f
+#define R0900_P1_MODCODLST8 0xf4b8
+#define MODCODLST8 REGx(R0900_P1_MODCODLST8)
+#define F0900_P1_DIS_8P_5_6 0xf4b800f0
+#define F0900_P1_DIS_8P_3_4 0xf4b8000f
/*P1_MODCODLST9*/
-#define R0900_P1_MODCODLST9 0xf4b9
-#define F0900_P1_DIS_8P_2_3 0xf4b900f0
-#define F0900_P1_DIS_8P_3_5 0xf4b9000f
+#define R0900_P1_MODCODLST9 0xf4b9
+#define MODCODLST9 REGx(R0900_P1_MODCODLST9)
+#define F0900_P1_DIS_8P_2_3 0xf4b900f0
+#define F0900_P1_DIS_8P_3_5 0xf4b9000f
/*P1_MODCODLSTA*/
-#define R0900_P1_MODCODLSTA 0xf4ba
-#define F0900_P1_DIS_QP_9_10 0xf4ba00f0
-#define F0900_P1_DIS_QP_8_9 0xf4ba000f
+#define R0900_P1_MODCODLSTA 0xf4ba
+#define MODCODLSTA REGx(R0900_P1_MODCODLSTA)
+#define F0900_P1_DIS_QP_9_10 0xf4ba00f0
+#define F0900_P1_DIS_QP_8_9 0xf4ba000f
/*P1_MODCODLSTB*/
-#define R0900_P1_MODCODLSTB 0xf4bb
-#define F0900_P1_DIS_QP_5_6 0xf4bb00f0
-#define F0900_P1_DIS_QP_4_5 0xf4bb000f
+#define R0900_P1_MODCODLSTB 0xf4bb
+#define MODCODLSTB REGx(R0900_P1_MODCODLSTB)
+#define F0900_P1_DIS_QP_5_6 0xf4bb00f0
+#define F0900_P1_DIS_QP_4_5 0xf4bb000f
/*P1_MODCODLSTC*/
-#define R0900_P1_MODCODLSTC 0xf4bc
-#define F0900_P1_DIS_QP_3_4 0xf4bc00f0
-#define F0900_P1_DIS_QP_2_3 0xf4bc000f
+#define R0900_P1_MODCODLSTC 0xf4bc
+#define MODCODLSTC REGx(R0900_P1_MODCODLSTC)
+#define F0900_P1_DIS_QP_3_4 0xf4bc00f0
+#define F0900_P1_DIS_QP_2_3 0xf4bc000f
/*P1_MODCODLSTD*/
-#define R0900_P1_MODCODLSTD 0xf4bd
-#define F0900_P1_DIS_QP_3_5 0xf4bd00f0
-#define F0900_P1_DIS_QP_1_2 0xf4bd000f
+#define R0900_P1_MODCODLSTD 0xf4bd
+#define MODCODLSTD REGx(R0900_P1_MODCODLSTD)
+#define F0900_P1_DIS_QP_3_5 0xf4bd00f0
+#define F0900_P1_DIS_QP_1_2 0xf4bd000f
/*P1_MODCODLSTE*/
-#define R0900_P1_MODCODLSTE 0xf4be
-#define F0900_P1_DIS_QP_2_5 0xf4be00f0
-#define F0900_P1_DIS_QP_1_3 0xf4be000f
+#define R0900_P1_MODCODLSTE 0xf4be
+#define MODCODLSTE REGx(R0900_P1_MODCODLSTE)
+#define F0900_P1_DIS_QP_2_5 0xf4be00f0
+#define F0900_P1_DIS_QP_1_3 0xf4be000f
/*P1_MODCODLSTF*/
-#define R0900_P1_MODCODLSTF 0xf4bf
-#define F0900_P1_DIS_QP_1_4 0xf4bf00f0
-#define F0900_P1_DDEMOD_SET 0xf4bf0002
-#define F0900_P1_DDEMOD_MASK 0xf4bf0001
+#define R0900_P1_MODCODLSTF 0xf4bf
+#define MODCODLSTF REGx(R0900_P1_MODCODLSTF)
+#define F0900_P1_DIS_QP_1_4 0xf4bf00f0
+
+/*P1_GAUSSR0*/
+#define R0900_P1_GAUSSR0 0xf4c0
+#define GAUSSR0 REGx(R0900_P1_GAUSSR0)
+#define F0900_P1_EN_CCIMODE 0xf4c00080
+#define F0900_P1_R0_GAUSSIEN 0xf4c0007f
+
+/*P1_CCIR0*/
+#define R0900_P1_CCIR0 0xf4c1
+#define CCIR0 REGx(R0900_P1_CCIR0)
+#define F0900_P1_CCIDETECT_PLHONLY 0xf4c10080
+#define F0900_P1_R0_CCI 0xf4c1007f
+
+/*P1_CCIQUANT*/
+#define R0900_P1_CCIQUANT 0xf4c2
+#define CCIQUANT REGx(R0900_P1_CCIQUANT)
+#define F0900_P1_CCI_BETA 0xf4c200e0
+#define F0900_P1_CCI_QUANT 0xf4c2001f
+
+/*P1_CCITHRES*/
+#define R0900_P1_CCITHRES 0xf4c3
+#define CCITHRES REGx(R0900_P1_CCITHRES)
+#define F0900_P1_CCI_THRESHOLD 0xf4c300ff
+
+/*P1_CCIACC*/
+#define R0900_P1_CCIACC 0xf4c4
+#define CCIACC REGx(R0900_P1_CCIACC)
+#define F0900_P1_CCI_VALUE 0xf4c400ff
/*P1_DMDRESCFG*/
-#define R0900_P1_DMDRESCFG 0xf4c6
-#define F0900_P1_DMDRES_RESET 0xf4c60080
-#define F0900_P1_DMDRES_NOISESQR 0xf4c60010
-#define F0900_P1_DMDRES_STRALL 0xf4c60008
-#define F0900_P1_DMDRES_NEWONLY 0xf4c60004
-#define F0900_P1_DMDRES_NOSTORE 0xf4c60002
-#define F0900_P1_DMDRES_AGC2MEM 0xf4c60001
+#define R0900_P1_DMDRESCFG 0xf4c6
+#define DMDRESCFG REGx(R0900_P1_DMDRESCFG)
+#define F0900_P1_DMDRES_RESET 0xf4c60080
+#define F0900_P1_DMDRES_STRALL 0xf4c60008
+#define F0900_P1_DMDRES_NEWONLY 0xf4c60004
+#define F0900_P1_DMDRES_NOSTORE 0xf4c60002
/*P1_DMDRESADR*/
-#define R0900_P1_DMDRESADR 0xf4c7
-#define F0900_P1_SUSP_PREDCANAL 0xf4c70080
-#define F0900_P1_DMDRES_VALIDCFR 0xf4c70040
-#define F0900_P1_DMDRES_MEMFULL 0xf4c70030
-#define F0900_P1_DMDRES_RESNBR 0xf4c7000f
+#define R0900_P1_DMDRESADR 0xf4c7
+#define DMDRESADR REGx(R0900_P1_DMDRESADR)
+#define F0900_P1_DMDRES_VALIDCFR 0xf4c70040
+#define F0900_P1_DMDRES_MEMFULL 0xf4c70030
+#define F0900_P1_DMDRES_RESNBR 0xf4c7000f
/*P1_DMDRESDATA7*/
-#define R0900_P1_DMDRESDATA7 0xf4c8
-#define F0900_P1_DMDRES_DATA7 0xf4c800ff
+#define R0900_P1_DMDRESDATA7 0xf4c8
+#define F0900_P1_DMDRES_DATA7 0xf4c800ff
/*P1_DMDRESDATA6*/
-#define R0900_P1_DMDRESDATA6 0xf4c9
-#define F0900_P1_DMDRES_DATA6 0xf4c900ff
+#define R0900_P1_DMDRESDATA6 0xf4c9
+#define F0900_P1_DMDRES_DATA6 0xf4c900ff
/*P1_DMDRESDATA5*/
-#define R0900_P1_DMDRESDATA5 0xf4ca
-#define F0900_P1_DMDRES_DATA5 0xf4ca00ff
+#define R0900_P1_DMDRESDATA5 0xf4ca
+#define F0900_P1_DMDRES_DATA5 0xf4ca00ff
/*P1_DMDRESDATA4*/
-#define R0900_P1_DMDRESDATA4 0xf4cb
-#define F0900_P1_DMDRES_DATA4 0xf4cb00ff
+#define R0900_P1_DMDRESDATA4 0xf4cb
+#define F0900_P1_DMDRES_DATA4 0xf4cb00ff
/*P1_DMDRESDATA3*/
-#define R0900_P1_DMDRESDATA3 0xf4cc
-#define F0900_P1_DMDRES_DATA3 0xf4cc00ff
+#define R0900_P1_DMDRESDATA3 0xf4cc
+#define F0900_P1_DMDRES_DATA3 0xf4cc00ff
/*P1_DMDRESDATA2*/
-#define R0900_P1_DMDRESDATA2 0xf4cd
-#define F0900_P1_DMDRES_DATA2 0xf4cd00ff
+#define R0900_P1_DMDRESDATA2 0xf4cd
+#define F0900_P1_DMDRES_DATA2 0xf4cd00ff
/*P1_DMDRESDATA1*/
-#define R0900_P1_DMDRESDATA1 0xf4ce
-#define F0900_P1_DMDRES_DATA1 0xf4ce00ff
+#define R0900_P1_DMDRESDATA1 0xf4ce
+#define F0900_P1_DMDRES_DATA1 0xf4ce00ff
/*P1_DMDRESDATA0*/
-#define R0900_P1_DMDRESDATA0 0xf4cf
-#define F0900_P1_DMDRES_DATA0 0xf4cf00ff
+#define R0900_P1_DMDRESDATA0 0xf4cf
+#define F0900_P1_DMDRES_DATA0 0xf4cf00ff
/*P1_FFEI1*/
-#define R0900_P1_FFEI1 0xf4d0
-#define F0900_P1_FFE_ACCI1 0xf4d001ff
+#define R0900_P1_FFEI1 0xf4d0
+#define FFEI1 REGx(R0900_P1_FFEI1)
+#define F0900_P1_FFE_ACCI1 0xf4d001ff
/*P1_FFEQ1*/
-#define R0900_P1_FFEQ1 0xf4d1
-#define F0900_P1_FFE_ACCQ1 0xf4d101ff
+#define R0900_P1_FFEQ1 0xf4d1
+#define FFEQ1 REGx(R0900_P1_FFEQ1)
+#define F0900_P1_FFE_ACCQ1 0xf4d101ff
/*P1_FFEI2*/
-#define R0900_P1_FFEI2 0xf4d2
-#define F0900_P1_FFE_ACCI2 0xf4d201ff
+#define R0900_P1_FFEI2 0xf4d2
+#define FFEI2 REGx(R0900_P1_FFEI2)
+#define F0900_P1_FFE_ACCI2 0xf4d201ff
/*P1_FFEQ2*/
-#define R0900_P1_FFEQ2 0xf4d3
-#define F0900_P1_FFE_ACCQ2 0xf4d301ff
+#define R0900_P1_FFEQ2 0xf4d3
+#define FFEQ2 REGx(R0900_P1_FFEQ2)
+#define F0900_P1_FFE_ACCQ2 0xf4d301ff
/*P1_FFEI3*/
-#define R0900_P1_FFEI3 0xf4d4
-#define F0900_P1_FFE_ACCI3 0xf4d401ff
+#define R0900_P1_FFEI3 0xf4d4
+#define FFEI3 REGx(R0900_P1_FFEI3)
+#define F0900_P1_FFE_ACCI3 0xf4d401ff
/*P1_FFEQ3*/
-#define R0900_P1_FFEQ3 0xf4d5
-#define F0900_P1_FFE_ACCQ3 0xf4d501ff
+#define R0900_P1_FFEQ3 0xf4d5
+#define FFEQ3 REGx(R0900_P1_FFEQ3)
+#define F0900_P1_FFE_ACCQ3 0xf4d501ff
/*P1_FFEI4*/
-#define R0900_P1_FFEI4 0xf4d6
-#define F0900_P1_FFE_ACCI4 0xf4d601ff
+#define R0900_P1_FFEI4 0xf4d6
+#define FFEI4 REGx(R0900_P1_FFEI4)
+#define F0900_P1_FFE_ACCI4 0xf4d601ff
/*P1_FFEQ4*/
-#define R0900_P1_FFEQ4 0xf4d7
-#define F0900_P1_FFE_ACCQ4 0xf4d701ff
+#define R0900_P1_FFEQ4 0xf4d7
+#define FFEQ4 REGx(R0900_P1_FFEQ4)
+#define F0900_P1_FFE_ACCQ4 0xf4d701ff
/*P1_FFECFG*/
-#define R0900_P1_FFECFG 0xf4d8
-#define F0900_P1_EQUALFFE_ON 0xf4d80040
-#define F0900_P1_EQUAL_USEDSYMB 0xf4d80030
-#define F0900_P1_MU_EQUALFFE 0xf4d80007
+#define R0900_P1_FFECFG 0xf4d8
+#define FFECFG REGx(R0900_P1_FFECFG)
+#define F0900_P1_EQUALFFE_ON 0xf4d80040
+#define F0900_P1_MU_EQUALFFE 0xf4d80007
/*P1_TNRCFG*/
-#define R0900_P1_TNRCFG 0xf4e0
-#define F0900_P1_TUN_ACKFAIL 0xf4e00080
-#define F0900_P1_TUN_TYPE 0xf4e00070
-#define F0900_P1_TUN_SECSTOP 0xf4e00008
-#define F0900_P1_TUN_VCOSRCH 0xf4e00004
-#define F0900_P1_TUN_MADDRESS 0xf4e00003
+#define R0900_P1_TNRCFG 0xf4e0
+#define TNRCFG REGx(R0900_P1_TNRCFG)
+#define F0900_P1_TUN_ACKFAIL 0xf4e00080
+#define F0900_P1_TUN_TYPE 0xf4e00070
+#define F0900_P1_TUN_SECSTOP 0xf4e00008
+#define F0900_P1_TUN_VCOSRCH 0xf4e00004
+#define F0900_P1_TUN_MADDRESS 0xf4e00003
/*P1_TNRCFG2*/
-#define R0900_P1_TNRCFG2 0xf4e1
-#define F0900_P1_TUN_IQSWAP 0xf4e10080
-#define F0900_P1_STB6110_STEP2MHZ 0xf4e10040
-#define F0900_P1_STB6120_DBLI2C 0xf4e10020
-#define F0900_P1_DIS_FCCK 0xf4e10010
-#define F0900_P1_DIS_LPEN 0xf4e10008
-#define F0900_P1_DIS_BWCALC 0xf4e10004
-#define F0900_P1_SHORT_WAITSTATES 0xf4e10002
-#define F0900_P1_DIS_2BWAGC1 0xf4e10001
+#define R0900_P1_TNRCFG2 0xf4e1
+#define TNRCFG2 REGx(R0900_P1_TNRCFG2)
+#define F0900_P1_TUN_IQSWAP 0xf4e10080
+#define F0900_P1_DIS_BWCALC 0xf4e10004
+#define F0900_P1_SHORT_WAITSTATES 0xf4e10002
/*P1_TNRXTAL*/
-#define R0900_P1_TNRXTAL 0xf4e4
-#define F0900_P1_TUN_MCLKDECIMAL 0xf4e400e0
-#define F0900_P1_TUN_XTALFREQ 0xf4e4001f
+#define R0900_P1_TNRXTAL 0xf4e4
+#define TNRXTAL REGx(R0900_P1_TNRXTAL)
+#define F0900_P1_TUN_XTALFREQ 0xf4e4001f
/*P1_TNRSTEPS*/
-#define R0900_P1_TNRSTEPS 0xf4e7
-#define F0900_P1_TUNER_BW1P6 0xf4e70080
-#define F0900_P1_BWINC_OFFSET 0xf4e70070
-#define F0900_P1_SOFTSTEP_RNG 0xf4e70008
-#define F0900_P1_TUN_BWOFFSET 0xf4e70107
+#define R0900_P1_TNRSTEPS 0xf4e7
+#define TNRSTEPS REGx(R0900_P1_TNRSTEPS)
+#define F0900_P1_TUNER_BW0P125 0xf4e70080
+#define F0900_P1_BWINC_OFFSET 0xf4e70170
+#define F0900_P1_SOFTSTEP_RNG 0xf4e70008
+#define F0900_P1_TUN_BWOFFSET 0xf4e70007
/*P1_TNRGAIN*/
-#define R0900_P1_TNRGAIN 0xf4e8
-#define F0900_P1_TUN_KDIVEN 0xf4e800c0
-#define F0900_P1_STB6X00_OCK 0xf4e80030
-#define F0900_P1_TUN_GAIN 0xf4e8000f
+#define R0900_P1_TNRGAIN 0xf4e8
+#define TNRGAIN REGx(R0900_P1_TNRGAIN)
+#define F0900_P1_TUN_KDIVEN 0xf4e800c0
+#define F0900_P1_STB6X00_OCK 0xf4e80030
+#define F0900_P1_TUN_GAIN 0xf4e8000f
/*P1_TNRRF1*/
-#define R0900_P1_TNRRF1 0xf4e9
-#define F0900_P1_TUN_RFFREQ2 0xf4e900ff
+#define R0900_P1_TNRRF1 0xf4e9
+#define TNRRF1 REGx(R0900_P1_TNRRF1)
+#define F0900_P1_TUN_RFFREQ2 0xf4e900ff
/*P1_TNRRF0*/
-#define R0900_P1_TNRRF0 0xf4ea
-#define F0900_P1_TUN_RFFREQ1 0xf4ea00ff
+#define R0900_P1_TNRRF0 0xf4ea
+#define TNRRF0 REGx(R0900_P1_TNRRF0)
+#define F0900_P1_TUN_RFFREQ1 0xf4ea00ff
/*P1_TNRBW*/
-#define R0900_P1_TNRBW 0xf4eb
-#define F0900_P1_TUN_RFFREQ0 0xf4eb00c0
-#define F0900_P1_TUN_BW 0xf4eb003f
+#define R0900_P1_TNRBW 0xf4eb
+#define TNRBW REGx(R0900_P1_TNRBW)
+#define F0900_P1_TUN_RFFREQ0 0xf4eb00c0
+#define F0900_P1_TUN_BW 0xf4eb003f
/*P1_TNRADJ*/
-#define R0900_P1_TNRADJ 0xf4ec
-#define F0900_P1_STB61X0_RCLK 0xf4ec0080
-#define F0900_P1_STB61X0_CALTIME 0xf4ec0040
-#define F0900_P1_STB6X00_DLB 0xf4ec0038
-#define F0900_P1_STB6000_FCL 0xf4ec0007
+#define R0900_P1_TNRADJ 0xf4ec
+#define TNRADJ REGx(R0900_P1_TNRADJ)
+#define F0900_P1_STB61X0_CALTIME 0xf4ec0040
/*P1_TNRCTL2*/
-#define R0900_P1_TNRCTL2 0xf4ed
-#define F0900_P1_STB61X0_LCP1_RCCKOFF 0xf4ed0080
-#define F0900_P1_STB61X0_LCP0 0xf4ed0040
-#define F0900_P1_STB61X0_XTOUT_RFOUTS 0xf4ed0020
-#define F0900_P1_STB61X0_XTON_MCKDV 0xf4ed0010
-#define F0900_P1_STB61X0_CALOFF_DCOFF 0xf4ed0008
-#define F0900_P1_STB6110_LPT 0xf4ed0004
-#define F0900_P1_STB6110_RX 0xf4ed0002
-#define F0900_P1_STB6110_SYN 0xf4ed0001
+#define R0900_P1_TNRCTL2 0xf4ed
+#define TNRCTL2 REGx(R0900_P1_TNRCTL2)
+#define F0900_P1_STB61X0_RCCKOFF 0xf4ed0080
+#define F0900_P1_STB61X0_ICP_SDOFF 0xf4ed0040
+#define F0900_P1_STB61X0_DCLOOPOFF 0xf4ed0020
+#define F0900_P1_STB61X0_REFOUTSEL 0xf4ed0010
+#define F0900_P1_STB61X0_CALOFF 0xf4ed0008
+#define F0900_P1_STB6XX0_LPT_BEN 0xf4ed0004
+#define F0900_P1_STB6XX0_RX_OSCP 0xf4ed0002
+#define F0900_P1_STB6XX0_SYN 0xf4ed0001
/*P1_TNRCFG3*/
-#define R0900_P1_TNRCFG3 0xf4ee
-#define F0900_P1_STB6120_DISCTRL1 0xf4ee0080
-#define F0900_P1_STB6120_INVORDER 0xf4ee0040
-#define F0900_P1_STB6120_ENCTRL6 0xf4ee0020
-#define F0900_P1_TUN_PLLFREQ 0xf4ee001c
-#define F0900_P1_TUN_I2CFREQ_MODE 0xf4ee0003
+#define R0900_P1_TNRCFG3 0xf4ee
+#define TNRCFG3 REGx(R0900_P1_TNRCFG3)
+#define F0900_P1_TUN_PLLFREQ 0xf4ee001c
+#define F0900_P1_TUN_I2CFREQ_MODE 0xf4ee0003
/*P1_TNRLAUNCH*/
-#define R0900_P1_TNRLAUNCH 0xf4f0
+#define R0900_P1_TNRLAUNCH 0xf4f0
+#define TNRLAUNCH REGx(R0900_P1_TNRLAUNCH)
/*P1_TNRLD*/
-#define R0900_P1_TNRLD 0xf4f0
-#define F0900_P1_TUNLD_VCOING 0xf4f00080
-#define F0900_P1_TUN_REG1FAIL 0xf4f00040
-#define F0900_P1_TUN_REG2FAIL 0xf4f00020
-#define F0900_P1_TUN_REG3FAIL 0xf4f00010
-#define F0900_P1_TUN_REG4FAIL 0xf4f00008
-#define F0900_P1_TUN_REG5FAIL 0xf4f00004
-#define F0900_P1_TUN_BWING 0xf4f00002
-#define F0900_P1_TUN_LOCKED 0xf4f00001
+#define R0900_P1_TNRLD 0xf4f0
+#define TNRLD REGx(R0900_P1_TNRLD)
+#define F0900_P1_TUNLD_VCOING 0xf4f00080
+#define F0900_P1_TUN_REG1FAIL 0xf4f00040
+#define F0900_P1_TUN_REG2FAIL 0xf4f00020
+#define F0900_P1_TUN_REG3FAIL 0xf4f00010
+#define F0900_P1_TUN_REG4FAIL 0xf4f00008
+#define F0900_P1_TUN_REG5FAIL 0xf4f00004
+#define F0900_P1_TUN_BWING 0xf4f00002
+#define F0900_P1_TUN_LOCKED 0xf4f00001
/*P1_TNROBSL*/
-#define R0900_P1_TNROBSL 0xf4f6
-#define F0900_P1_TUN_I2CABORTED 0xf4f60080
-#define F0900_P1_TUN_LPEN 0xf4f60040
-#define F0900_P1_TUN_FCCK 0xf4f60020
-#define F0900_P1_TUN_I2CLOCKED 0xf4f60010
-#define F0900_P1_TUN_PROGDONE 0xf4f6000c
-#define F0900_P1_TUN_RFRESTE1 0xf4f60003
+#define R0900_P1_TNROBSL 0xf4f6
+#define TNROBSL REGx(R0900_P1_TNROBSL)
+#define F0900_P1_TUN_I2CABORTED 0xf4f60080
+#define F0900_P1_TUN_LPEN 0xf4f60040
+#define F0900_P1_TUN_FCCK 0xf4f60020
+#define F0900_P1_TUN_I2CLOCKED 0xf4f60010
+#define F0900_P1_TUN_PROGDONE 0xf4f6000c
+#define F0900_P1_TUN_RFRESTE1 0xf4f60003
/*P1_TNRRESTE*/
-#define R0900_P1_TNRRESTE 0xf4f7
-#define F0900_P1_TUN_RFRESTE0 0xf4f700ff
+#define R0900_P1_TNRRESTE 0xf4f7
+#define TNRRESTE REGx(R0900_P1_TNRRESTE)
+#define F0900_P1_TUN_RFRESTE0 0xf4f700ff
/*P1_SMAPCOEF7*/
-#define R0900_P1_SMAPCOEF7 0xf500
-#define F0900_P1_DIS_QSCALE 0xf5000080
-#define F0900_P1_SMAPCOEF_Q_LLR12 0xf500017f
+#define R0900_P1_SMAPCOEF7 0xf500
+#define SMAPCOEF7 REGx(R0900_P1_SMAPCOEF7)
+#define F0900_P1_DIS_QSCALE 0xf5000080
+#define F0900_P1_SMAPCOEF_Q_LLR12 0xf500017f
/*P1_SMAPCOEF6*/
-#define R0900_P1_SMAPCOEF6 0xf501
-#define F0900_P1_DIS_NEWSCALE 0xf5010008
-#define F0900_P1_ADJ_8PSKLLR1 0xf5010004
-#define F0900_P1_OLD_8PSKLLR1 0xf5010002
-#define F0900_P1_DIS_AB8PSK 0xf5010001
+#define R0900_P1_SMAPCOEF6 0xf501
+#define SMAPCOEF6 REGx(R0900_P1_SMAPCOEF6)
+#define F0900_P1_ADJ_8PSKLLR1 0xf5010004
+#define F0900_P1_OLD_8PSKLLR1 0xf5010002
+#define F0900_P1_DIS_AB8PSK 0xf5010001
/*P1_SMAPCOEF5*/
-#define R0900_P1_SMAPCOEF5 0xf502
-#define F0900_P1_DIS_8SCALE 0xf5020080
-#define F0900_P1_SMAPCOEF_8P_LLR23 0xf502017f
+#define R0900_P1_SMAPCOEF5 0xf502
+#define SMAPCOEF5 REGx(R0900_P1_SMAPCOEF5)
+#define F0900_P1_DIS_8SCALE 0xf5020080
+#define F0900_P1_SMAPCOEF_8P_LLR23 0xf502017f
+
+/*P1_NCO2MAX1*/
+#define R0900_P1_NCO2MAX1 0xf514
+#define NCO2MAX1 REGx(R0900_P1_NCO2MAX1)
+#define F0900_P1_TETA2_MAXVABS1 0xf51400ff
+
+/*P1_NCO2MAX0*/
+#define R0900_P1_NCO2MAX0 0xf515
+#define NCO2MAX0 REGx(R0900_P1_NCO2MAX0)
+#define F0900_P1_TETA2_MAXVABS0 0xf51500ff
+
+/*P1_NCO2FR1*/
+#define R0900_P1_NCO2FR1 0xf516
+#define NCO2FR1 REGx(R0900_P1_NCO2FR1)
+#define F0900_P1_NCO2FINAL_ANGLE1 0xf51600ff
+
+/*P1_NCO2FR0*/
+#define R0900_P1_NCO2FR0 0xf517
+#define NCO2FR0 REGx(R0900_P1_NCO2FR0)
+#define F0900_P1_NCO2FINAL_ANGLE0 0xf51700ff
+
+/*P1_CFR2AVRGE1*/
+#define R0900_P1_CFR2AVRGE1 0xf518
+#define CFR2AVRGE1 REGx(R0900_P1_CFR2AVRGE1)
+#define F0900_P1_I2C_CFR2AVERAGE1 0xf51800ff
+
+/*P1_CFR2AVRGE0*/
+#define R0900_P1_CFR2AVRGE0 0xf519
+#define CFR2AVRGE0 REGx(R0900_P1_CFR2AVRGE0)
+#define F0900_P1_I2C_CFR2AVERAGE0 0xf51900ff
/*P1_DMDPLHSTAT*/
-#define R0900_P1_DMDPLHSTAT 0xf520
-#define F0900_P1_PLH_STATISTIC 0xf52000ff
+#define R0900_P1_DMDPLHSTAT 0xf520
+#define DMDPLHSTAT REGx(R0900_P1_DMDPLHSTAT)
+#define F0900_P1_PLH_STATISTIC 0xf52000ff
/*P1_LOCKTIME3*/
-#define R0900_P1_LOCKTIME3 0xf522
-#define F0900_P1_DEMOD_LOCKTIME3 0xf52200ff
+#define R0900_P1_LOCKTIME3 0xf522
+#define LOCKTIME3 REGx(R0900_P1_LOCKTIME3)
+#define F0900_P1_DEMOD_LOCKTIME3 0xf52200ff
/*P1_LOCKTIME2*/
-#define R0900_P1_LOCKTIME2 0xf523
-#define F0900_P1_DEMOD_LOCKTIME2 0xf52300ff
+#define R0900_P1_LOCKTIME2 0xf523
+#define LOCKTIME2 REGx(R0900_P1_LOCKTIME2)
+#define F0900_P1_DEMOD_LOCKTIME2 0xf52300ff
/*P1_LOCKTIME1*/
-#define R0900_P1_LOCKTIME1 0xf524
-#define F0900_P1_DEMOD_LOCKTIME1 0xf52400ff
+#define R0900_P1_LOCKTIME1 0xf524
+#define LOCKTIME1 REGx(R0900_P1_LOCKTIME1)
+#define F0900_P1_DEMOD_LOCKTIME1 0xf52400ff
/*P1_LOCKTIME0*/
-#define R0900_P1_LOCKTIME0 0xf525
-#define F0900_P1_DEMOD_LOCKTIME0 0xf52500ff
+#define R0900_P1_LOCKTIME0 0xf525
+#define LOCKTIME0 REGx(R0900_P1_LOCKTIME0)
+#define F0900_P1_DEMOD_LOCKTIME0 0xf52500ff
/*P1_VITSCALE*/
-#define R0900_P1_VITSCALE 0xf532
-#define F0900_P1_NVTH_NOSRANGE 0xf5320080
-#define F0900_P1_VERROR_MAXMODE 0xf5320040
-#define F0900_P1_KDIV_MODE 0xf5320030
-#define F0900_P1_NSLOWSN_LOCKED 0xf5320008
-#define F0900_P1_DELOCK_PRFLOSS 0xf5320004
-#define F0900_P1_DIS_RSFLOCK 0xf5320002
+#define R0900_P1_VITSCALE 0xf532
+#define VITSCALE REGx(R0900_P1_VITSCALE)
+#define F0900_P1_NVTH_NOSRANGE 0xf5320080
+#define F0900_P1_VERROR_MAXMODE 0xf5320040
+#define F0900_P1_NSLOWSN_LOCKED 0xf5320008
+#define F0900_P1_DIS_RSFLOCK 0xf5320002
/*P1_FECM*/
-#define R0900_P1_FECM 0xf533
-#define F0900_P1_DSS_DVB 0xf5330080
-#define F0900_P1_DEMOD_BYPASS 0xf5330040
-#define F0900_P1_CMP_SLOWMODE 0xf5330020
-#define F0900_P1_DSS_SRCH 0xf5330010
-#define F0900_P1_DIFF_MODEVIT 0xf5330004
-#define F0900_P1_SYNCVIT 0xf5330002
-#define F0900_P1_IQINV 0xf5330001
+#define R0900_P1_FECM 0xf533
+#define FECM REGx(R0900_P1_FECM)
+#define F0900_P1_DSS_DVB 0xf5330080
+#define DSS_DVB FLDx(F0900_P1_DSS_DVB)
+#define F0900_P1_DSS_SRCH 0xf5330010
+#define F0900_P1_SYNCVIT 0xf5330002
+#define F0900_P1_IQINV 0xf5330001
+#define IQINV FLDx(F0900_P1_IQINV)
/*P1_VTH12*/
-#define R0900_P1_VTH12 0xf534
-#define F0900_P1_VTH12 0xf53400ff
+#define R0900_P1_VTH12 0xf534
+#define VTH12 REGx(R0900_P1_VTH12)
+#define F0900_P1_VTH12 0xf53400ff
/*P1_VTH23*/
-#define R0900_P1_VTH23 0xf535
-#define F0900_P1_VTH23 0xf53500ff
+#define R0900_P1_VTH23 0xf535
+#define VTH23 REGx(R0900_P1_VTH23)
+#define F0900_P1_VTH23 0xf53500ff
/*P1_VTH34*/
-#define R0900_P1_VTH34 0xf536
-#define F0900_P1_VTH34 0xf53600ff
+#define R0900_P1_VTH34 0xf536
+#define VTH34 REGx(R0900_P1_VTH34)
+#define F0900_P1_VTH34 0xf53600ff
/*P1_VTH56*/
-#define R0900_P1_VTH56 0xf537
-#define F0900_P1_VTH56 0xf53700ff
+#define R0900_P1_VTH56 0xf537
+#define VTH56 REGx(R0900_P1_VTH56)
+#define F0900_P1_VTH56 0xf53700ff
/*P1_VTH67*/
-#define R0900_P1_VTH67 0xf538
-#define F0900_P1_VTH67 0xf53800ff
+#define R0900_P1_VTH67 0xf538
+#define VTH67 REGx(R0900_P1_VTH67)
+#define F0900_P1_VTH67 0xf53800ff
/*P1_VTH78*/
-#define R0900_P1_VTH78 0xf539
-#define F0900_P1_VTH78 0xf53900ff
+#define R0900_P1_VTH78 0xf539
+#define VTH78 REGx(R0900_P1_VTH78)
+#define F0900_P1_VTH78 0xf53900ff
/*P1_VITCURPUN*/
-#define R0900_P1_VITCURPUN 0xf53a
-#define F0900_P1_VIT_MAPPING 0xf53a00e0
-#define F0900_P1_VIT_CURPUN 0xf53a001f
+#define R0900_P1_VITCURPUN 0xf53a
+#define VITCURPUN REGx(R0900_P1_VITCURPUN)
+#define F0900_P1_VIT_CURPUN 0xf53a001f
+#define VIT_CURPUN FLDx(F0900_P1_VIT_CURPUN)
/*P1_VERROR*/
-#define R0900_P1_VERROR 0xf53b
-#define F0900_P1_REGERR_VIT 0xf53b00ff
+#define R0900_P1_VERROR 0xf53b
+#define VERROR REGx(R0900_P1_VERROR)
+#define F0900_P1_REGERR_VIT 0xf53b00ff
/*P1_PRVIT*/
-#define R0900_P1_PRVIT 0xf53c
-#define F0900_P1_DIS_VTHLOCK 0xf53c0040
-#define F0900_P1_E7_8VIT 0xf53c0020
-#define F0900_P1_E6_7VIT 0xf53c0010
-#define F0900_P1_E5_6VIT 0xf53c0008
-#define F0900_P1_E3_4VIT 0xf53c0004
-#define F0900_P1_E2_3VIT 0xf53c0002
-#define F0900_P1_E1_2VIT 0xf53c0001
+#define R0900_P1_PRVIT 0xf53c
+#define PRVIT REGx(R0900_P1_PRVIT)
+#define F0900_P1_DIS_VTHLOCK 0xf53c0040
+#define F0900_P1_E7_8VIT 0xf53c0020
+#define F0900_P1_E6_7VIT 0xf53c0010
+#define F0900_P1_E5_6VIT 0xf53c0008
+#define F0900_P1_E3_4VIT 0xf53c0004
+#define F0900_P1_E2_3VIT 0xf53c0002
+#define F0900_P1_E1_2VIT 0xf53c0001
/*P1_VAVSRVIT*/
-#define R0900_P1_VAVSRVIT 0xf53d
-#define F0900_P1_AMVIT 0xf53d0080
-#define F0900_P1_FROZENVIT 0xf53d0040
-#define F0900_P1_SNVIT 0xf53d0030
-#define F0900_P1_TOVVIT 0xf53d000c
-#define F0900_P1_HYPVIT 0xf53d0003
+#define R0900_P1_VAVSRVIT 0xf53d
+#define VAVSRVIT REGx(R0900_P1_VAVSRVIT)
+#define F0900_P1_AMVIT 0xf53d0080
+#define F0900_P1_FROZENVIT 0xf53d0040
+#define F0900_P1_SNVIT 0xf53d0030
+#define F0900_P1_TOVVIT 0xf53d000c
+#define F0900_P1_HYPVIT 0xf53d0003
/*P1_VSTATUSVIT*/
-#define R0900_P1_VSTATUSVIT 0xf53e
-#define F0900_P1_VITERBI_ON 0xf53e0080
-#define F0900_P1_END_LOOPVIT 0xf53e0040
-#define F0900_P1_VITERBI_DEPRF 0xf53e0020
-#define F0900_P1_PRFVIT 0xf53e0010
-#define F0900_P1_LOCKEDVIT 0xf53e0008
-#define F0900_P1_VITERBI_DELOCK 0xf53e0004
-#define F0900_P1_VIT_DEMODSEL 0xf53e0002
-#define F0900_P1_VITERBI_COMPOUT 0xf53e0001
+#define R0900_P1_VSTATUSVIT 0xf53e
+#define VSTATUSVIT REGx(R0900_P1_VSTATUSVIT)
+#define F0900_P1_PRFVIT 0xf53e0010
+#define PRFVIT FLDx(F0900_P1_PRFVIT)
+#define F0900_P1_LOCKEDVIT 0xf53e0008
+#define LOCKEDVIT FLDx(F0900_P1_LOCKEDVIT)
/*P1_VTHINUSE*/
-#define R0900_P1_VTHINUSE 0xf53f
-#define F0900_P1_VIT_INUSE 0xf53f00ff
+#define R0900_P1_VTHINUSE 0xf53f
+#define VTHINUSE REGx(R0900_P1_VTHINUSE)
+#define F0900_P1_VIT_INUSE 0xf53f00ff
/*P1_KDIV12*/
-#define R0900_P1_KDIV12 0xf540
-#define F0900_P1_KDIV12_MANUAL 0xf5400080
-#define F0900_P1_K_DIVIDER_12 0xf540007f
+#define R0900_P1_KDIV12 0xf540
+#define KDIV12 REGx(R0900_P1_KDIV12)
+#define F0900_P1_K_DIVIDER_12 0xf540007f
/*P1_KDIV23*/
-#define R0900_P1_KDIV23 0xf541
-#define F0900_P1_KDIV23_MANUAL 0xf5410080
-#define F0900_P1_K_DIVIDER_23 0xf541007f
+#define R0900_P1_KDIV23 0xf541
+#define KDIV23 REGx(R0900_P1_KDIV23)
+#define F0900_P1_K_DIVIDER_23 0xf541007f
/*P1_KDIV34*/
-#define R0900_P1_KDIV34 0xf542
-#define F0900_P1_KDIV34_MANUAL 0xf5420080
-#define F0900_P1_K_DIVIDER_34 0xf542007f
+#define R0900_P1_KDIV34 0xf542
+#define KDIV34 REGx(R0900_P1_KDIV34)
+#define F0900_P1_K_DIVIDER_34 0xf542007f
/*P1_KDIV56*/
-#define R0900_P1_KDIV56 0xf543
-#define F0900_P1_KDIV56_MANUAL 0xf5430080
-#define F0900_P1_K_DIVIDER_56 0xf543007f
+#define R0900_P1_KDIV56 0xf543
+#define KDIV56 REGx(R0900_P1_KDIV56)
+#define F0900_P1_K_DIVIDER_56 0xf543007f
/*P1_KDIV67*/
-#define R0900_P1_KDIV67 0xf544
-#define F0900_P1_KDIV67_MANUAL 0xf5440080
-#define F0900_P1_K_DIVIDER_67 0xf544007f
+#define R0900_P1_KDIV67 0xf544
+#define KDIV67 REGx(R0900_P1_KDIV67)
+#define F0900_P1_K_DIVIDER_67 0xf544007f
/*P1_KDIV78*/
-#define R0900_P1_KDIV78 0xf545
-#define F0900_P1_KDIV78_MANUAL 0xf5450080
-#define F0900_P1_K_DIVIDER_78 0xf545007f
+#define R0900_P1_KDIV78 0xf545
+#define KDIV78 REGx(R0900_P1_KDIV78)
+#define F0900_P1_K_DIVIDER_78 0xf545007f
/*P1_PDELCTRL1*/
-#define R0900_P1_PDELCTRL1 0xf550
-#define F0900_P1_INV_MISMASK 0xf5500080
-#define F0900_P1_FORCE_ACCEPTED 0xf5500040
-#define F0900_P1_FILTER_EN 0xf5500020
-#define F0900_P1_FORCE_PKTDELINUSE 0xf5500010
-#define F0900_P1_HYSTEN 0xf5500008
-#define F0900_P1_HYSTSWRST 0xf5500004
-#define F0900_P1_EN_MIS00 0xf5500002
-#define F0900_P1_ALGOSWRST 0xf5500001
+#define R0900_P1_PDELCTRL1 0xf550
+#define PDELCTRL1 REGx(R0900_P1_PDELCTRL1)
+#define F0900_P1_INV_MISMASK 0xf5500080
+#define F0900_P1_FILTER_EN 0xf5500020
+#define F0900_P1_EN_MIS00 0xf5500002
+#define F0900_P1_ALGOSWRST 0xf5500001
+#define ALGOSWRST FLDx(F0900_P1_ALGOSWRST)
/*P1_PDELCTRL2*/
-#define R0900_P1_PDELCTRL2 0xf551
-#define F0900_P1_FORCE_CONTINUOUS 0xf5510080
-#define F0900_P1_RESET_UPKO_COUNT 0xf5510040
-#define F0900_P1_USER_PKTDELIN_NB 0xf5510020
-#define F0900_P1_FORCE_LOCKED 0xf5510010
-#define F0900_P1_DATA_UNBBSCRAM 0xf5510008
-#define F0900_P1_FORCE_LONGPKT 0xf5510004
-#define F0900_P1_FRAME_MODE 0xf5510002
+#define R0900_P1_PDELCTRL2 0xf551
+#define PDELCTRL2 REGx(R0900_P1_PDELCTRL2)
+#define F0900_P1_RESET_UPKO_COUNT 0xf5510040
+#define RESET_UPKO_COUNT FLDx(F0900_P1_RESET_UPKO_COUNT)
+#define F0900_P1_FRAME_MODE 0xf5510002
+#define F0900_P1_NOBCHERRFLG_USE 0xf5510001
/*P1_HYSTTHRESH*/
-#define R0900_P1_HYSTTHRESH 0xf554
-#define F0900_P1_UNLCK_THRESH 0xf55400f0
-#define F0900_P1_DELIN_LCK_THRESH 0xf554000f
+#define R0900_P1_HYSTTHRESH 0xf554
+#define HYSTTHRESH REGx(R0900_P1_HYSTTHRESH)
+#define F0900_P1_UNLCK_THRESH 0xf55400f0
+#define F0900_P1_DELIN_LCK_THRESH 0xf554000f
/*P1_ISIENTRY*/
-#define R0900_P1_ISIENTRY 0xf55e
-#define F0900_P1_ISI_ENTRY 0xf55e00ff
+#define R0900_P1_ISIENTRY 0xf55e
+#define ISIENTRY REGx(R0900_P1_ISIENTRY)
+#define F0900_P1_ISI_ENTRY 0xf55e00ff
/*P1_ISIBITENA*/
-#define R0900_P1_ISIBITENA 0xf55f
-#define F0900_P1_ISI_BIT_EN 0xf55f00ff
+#define R0900_P1_ISIBITENA 0xf55f
+#define ISIBITENA REGx(R0900_P1_ISIBITENA)
+#define F0900_P1_ISI_BIT_EN 0xf55f00ff
/*P1_MATSTR1*/
-#define R0900_P1_MATSTR1 0xf560
-#define F0900_P1_MATYPE_CURRENT1 0xf56000ff
+#define R0900_P1_MATSTR1 0xf560
+#define MATSTR1 REGx(R0900_P1_MATSTR1)
+#define F0900_P1_MATYPE_CURRENT1 0xf56000ff
/*P1_MATSTR0*/
-#define R0900_P1_MATSTR0 0xf561
-#define F0900_P1_MATYPE_CURRENT0 0xf56100ff
+#define R0900_P1_MATSTR0 0xf561
+#define MATSTR0 REGx(R0900_P1_MATSTR0)
+#define F0900_P1_MATYPE_CURRENT0 0xf56100ff
/*P1_UPLSTR1*/
-#define R0900_P1_UPLSTR1 0xf562
-#define F0900_P1_UPL_CURRENT1 0xf56200ff
+#define R0900_P1_UPLSTR1 0xf562
+#define UPLSTR1 REGx(R0900_P1_UPLSTR1)
+#define F0900_P1_UPL_CURRENT1 0xf56200ff
/*P1_UPLSTR0*/
-#define R0900_P1_UPLSTR0 0xf563
-#define F0900_P1_UPL_CURRENT0 0xf56300ff
+#define R0900_P1_UPLSTR0 0xf563
+#define UPLSTR0 REGx(R0900_P1_UPLSTR0)
+#define F0900_P1_UPL_CURRENT0 0xf56300ff
/*P1_DFLSTR1*/
-#define R0900_P1_DFLSTR1 0xf564
-#define F0900_P1_DFL_CURRENT1 0xf56400ff
+#define R0900_P1_DFLSTR1 0xf564
+#define DFLSTR1 REGx(R0900_P1_DFLSTR1)
+#define F0900_P1_DFL_CURRENT1 0xf56400ff
/*P1_DFLSTR0*/
-#define R0900_P1_DFLSTR0 0xf565
-#define F0900_P1_DFL_CURRENT0 0xf56500ff
+#define R0900_P1_DFLSTR0 0xf565
+#define DFLSTR0 REGx(R0900_P1_DFLSTR0)
+#define F0900_P1_DFL_CURRENT0 0xf56500ff
/*P1_SYNCSTR*/
-#define R0900_P1_SYNCSTR 0xf566
-#define F0900_P1_SYNC_CURRENT 0xf56600ff
+#define R0900_P1_SYNCSTR 0xf566
+#define SYNCSTR REGx(R0900_P1_SYNCSTR)
+#define F0900_P1_SYNC_CURRENT 0xf56600ff
/*P1_SYNCDSTR1*/
-#define R0900_P1_SYNCDSTR1 0xf567
-#define F0900_P1_SYNCD_CURRENT1 0xf56700ff
+#define R0900_P1_SYNCDSTR1 0xf567
+#define SYNCDSTR1 REGx(R0900_P1_SYNCDSTR1)
+#define F0900_P1_SYNCD_CURRENT1 0xf56700ff
/*P1_SYNCDSTR0*/
-#define R0900_P1_SYNCDSTR0 0xf568
-#define F0900_P1_SYNCD_CURRENT0 0xf56800ff
+#define R0900_P1_SYNCDSTR0 0xf568
+#define SYNCDSTR0 REGx(R0900_P1_SYNCDSTR0)
+#define F0900_P1_SYNCD_CURRENT0 0xf56800ff
/*P1_PDELSTATUS1*/
-#define R0900_P1_PDELSTATUS1 0xf569
-#define F0900_P1_PKTDELIN_DELOCK 0xf5690080
-#define F0900_P1_SYNCDUPDFL_BADDFL 0xf5690040
-#define F0900_P1_CONTINUOUS_STREAM 0xf5690020
-#define F0900_P1_UNACCEPTED_STREAM 0xf5690010
-#define F0900_P1_BCH_ERROR_FLAG 0xf5690008
-#define F0900_P1_BBHCRCKO 0xf5690004
-#define F0900_P1_PKTDELIN_LOCK 0xf5690002
-#define F0900_P1_FIRST_LOCK 0xf5690001
+#define R0900_P1_PDELSTATUS1 0xf569
+#define F0900_P1_PKTDELIN_DELOCK 0xf5690080
+#define F0900_P1_SYNCDUPDFL_BADDFL 0xf5690040
+#define F0900_P1_CONTINUOUS_STREAM 0xf5690020
+#define F0900_P1_UNACCEPTED_STREAM 0xf5690010
+#define F0900_P1_BCH_ERROR_FLAG 0xf5690008
+#define F0900_P1_PKTDELIN_LOCK 0xf5690002
+#define PKTDELIN_LOCK FLDx(F0900_P1_PKTDELIN_LOCK)
+#define F0900_P1_FIRST_LOCK 0xf5690001
/*P1_PDELSTATUS2*/
-#define R0900_P1_PDELSTATUS2 0xf56a
-#define F0900_P1_PKTDEL_DEMODSEL 0xf56a0080
-#define F0900_P1_FRAME_MODCOD 0xf56a007c
-#define F0900_P1_FRAME_TYPE 0xf56a0003
+#define R0900_P1_PDELSTATUS2 0xf56a
+#define F0900_P1_FRAME_MODCOD 0xf56a007c
+#define F0900_P1_FRAME_TYPE 0xf56a0003
/*P1_BBFCRCKO1*/
-#define R0900_P1_BBFCRCKO1 0xf56b
-#define F0900_P1_BBHCRC_KOCNT1 0xf56b00ff
+#define R0900_P1_BBFCRCKO1 0xf56b
+#define BBFCRCKO1 REGx(R0900_P1_BBFCRCKO1)
+#define F0900_P1_BBHCRC_KOCNT1 0xf56b00ff
/*P1_BBFCRCKO0*/
-#define R0900_P1_BBFCRCKO0 0xf56c
-#define F0900_P1_BBHCRC_KOCNT0 0xf56c00ff
+#define R0900_P1_BBFCRCKO0 0xf56c
+#define BBFCRCKO0 REGx(R0900_P1_BBFCRCKO0)
+#define F0900_P1_BBHCRC_KOCNT0 0xf56c00ff
/*P1_UPCRCKO1*/
-#define R0900_P1_UPCRCKO1 0xf56d
-#define F0900_P1_PKTCRC_KOCNT1 0xf56d00ff
+#define R0900_P1_UPCRCKO1 0xf56d
+#define UPCRCKO1 REGx(R0900_P1_UPCRCKO1)
+#define F0900_P1_PKTCRC_KOCNT1 0xf56d00ff
/*P1_UPCRCKO0*/
-#define R0900_P1_UPCRCKO0 0xf56e
-#define F0900_P1_PKTCRC_KOCNT0 0xf56e00ff
+#define R0900_P1_UPCRCKO0 0xf56e
+#define UPCRCKO0 REGx(R0900_P1_UPCRCKO0)
+#define F0900_P1_PKTCRC_KOCNT0 0xf56e00ff
+
+/*P1_PDELCTRL3*/
+#define R0900_P1_PDELCTRL3 0xf56f
+#define PDELCTRL3 REGx(R0900_P1_PDELCTRL3)
+#define F0900_P1_PKTDEL_CONTFAIL 0xf56f0080
+#define F0900_P1_NOFIFO_BCHERR 0xf56f0020
/*P1_TSSTATEM*/
-#define R0900_P1_TSSTATEM 0xf570
-#define F0900_P1_TSDIL_ON 0xf5700080
-#define F0900_P1_TSSKIPRS_ON 0xf5700040
-#define F0900_P1_TSRS_ON 0xf5700020
-#define F0900_P1_TSDESCRAMB_ON 0xf5700010
-#define F0900_P1_TSFRAME_MODE 0xf5700008
-#define F0900_P1_TS_DISABLE 0xf5700004
-#define F0900_P1_TSACM_MODE 0xf5700002
-#define F0900_P1_TSOUT_NOSYNC 0xf5700001
+#define R0900_P1_TSSTATEM 0xf570
+#define TSSTATEM REGx(R0900_P1_TSSTATEM)
+#define F0900_P1_TSDIL_ON 0xf5700080
+#define F0900_P1_TSRS_ON 0xf5700020
+#define F0900_P1_TSDESCRAMB_ON 0xf5700010
+#define F0900_P1_TSFRAME_MODE 0xf5700008
+#define F0900_P1_TS_DISABLE 0xf5700004
+#define F0900_P1_TSOUT_NOSYNC 0xf5700001
/*P1_TSCFGH*/
-#define R0900_P1_TSCFGH 0xf572
-#define F0900_P1_TSFIFO_DVBCI 0xf5720080
-#define F0900_P1_TSFIFO_SERIAL 0xf5720040
-#define F0900_P1_TSFIFO_TEIUPDATE 0xf5720020
-#define F0900_P1_TSFIFO_DUTY50 0xf5720010
-#define F0900_P1_TSFIFO_HSGNLOUT 0xf5720008
-#define F0900_P1_TSFIFO_ERRMODE 0xf5720006
-#define F0900_P1_RST_HWARE 0xf5720001
+#define R0900_P1_TSCFGH 0xf572
+#define TSCFGH REGx(R0900_P1_TSCFGH)
+#define F0900_P1_TSFIFO_DVBCI 0xf5720080
+#define F0900_P1_TSFIFO_SERIAL 0xf5720040
+#define F0900_P1_TSFIFO_TEIUPDATE 0xf5720020
+#define F0900_P1_TSFIFO_DUTY50 0xf5720010
+#define F0900_P1_TSFIFO_HSGNLOUT 0xf5720008
+#define F0900_P1_TSFIFO_ERRMODE 0xf5720006
+#define F0900_P1_RST_HWARE 0xf5720001
+#define RST_HWARE FLDx(F0900_P1_RST_HWARE)
/*P1_TSCFGM*/
-#define R0900_P1_TSCFGM 0xf573
-#define F0900_P1_TSFIFO_MANSPEED 0xf57300c0
-#define F0900_P1_TSFIFO_PERMDATA 0xf5730020
-#define F0900_P1_TSFIFO_NONEWSGNL 0xf5730010
-#define F0900_P1_TSFIFO_BITSPEED 0xf5730008
-#define F0900_P1_NPD_SPECDVBS2 0xf5730004
-#define F0900_P1_TSFIFO_STOPCKDIS 0xf5730002
-#define F0900_P1_TSFIFO_INVDATA 0xf5730001
+#define R0900_P1_TSCFGM 0xf573
+#define TSCFGM REGx(R0900_P1_TSCFGM)
+#define F0900_P1_TSFIFO_MANSPEED 0xf57300c0
+#define F0900_P1_TSFIFO_PERMDATA 0xf5730020
+#define F0900_P1_TSFIFO_DPUNACT 0xf5730002
+#define F0900_P1_TSFIFO_INVDATA 0xf5730001
/*P1_TSCFGL*/
-#define R0900_P1_TSCFGL 0xf574
-#define F0900_P1_TSFIFO_BCLKDEL1CK 0xf57400c0
-#define F0900_P1_BCHERROR_MODE 0xf5740030
-#define F0900_P1_TSFIFO_NSGNL2DATA 0xf5740008
-#define F0900_P1_TSFIFO_EMBINDVB 0xf5740004
-#define F0900_P1_TSFIFO_DPUNACT 0xf5740002
-#define F0900_P1_TSFIFO_NPDOFF 0xf5740001
+#define R0900_P1_TSCFGL 0xf574
+#define TSCFGL REGx(R0900_P1_TSCFGL)
+#define F0900_P1_TSFIFO_BCLKDEL1CK 0xf57400c0
+#define F0900_P1_BCHERROR_MODE 0xf5740030
+#define F0900_P1_TSFIFO_NSGNL2DATA 0xf5740008
+#define F0900_P1_TSFIFO_EMBINDVB 0xf5740004
+#define F0900_P1_TSFIFO_BITSPEED 0xf5740003
/*P1_TSINSDELH*/
-#define R0900_P1_TSINSDELH 0xf576
-#define F0900_P1_TSDEL_SYNCBYTE 0xf5760080
-#define F0900_P1_TSDEL_XXHEADER 0xf5760040
-#define F0900_P1_TSDEL_BBHEADER 0xf5760020
-#define F0900_P1_TSDEL_DATAFIELD 0xf5760010
-#define F0900_P1_TSINSDEL_ISCR 0xf5760008
-#define F0900_P1_TSINSDEL_NPD 0xf5760004
-#define F0900_P1_TSINSDEL_RSPARITY 0xf5760002
-#define F0900_P1_TSINSDEL_CRC8 0xf5760001
+#define R0900_P1_TSINSDELH 0xf576
+#define TSINSDELH REGx(R0900_P1_TSINSDELH)
+#define F0900_P1_TSDEL_SYNCBYTE 0xf5760080
+#define F0900_P1_TSDEL_XXHEADER 0xf5760040
+#define F0900_P1_TSDEL_BBHEADER 0xf5760020
+#define F0900_P1_TSDEL_DATAFIELD 0xf5760010
+#define F0900_P1_TSINSDEL_ISCR 0xf5760008
+#define F0900_P1_TSINSDEL_NPD 0xf5760004
+#define F0900_P1_TSINSDEL_RSPARITY 0xf5760002
+#define F0900_P1_TSINSDEL_CRC8 0xf5760001
+
+/*P1_TSDIVN*/
+#define R0900_P1_TSDIVN 0xf579
+#define TSDIVN REGx(R0900_P1_TSDIVN)
+#define F0900_P1_TSFIFO_SPEEDMODE 0xf57900c0
+
+/*P1_TSCFG4*/
+#define R0900_P1_TSCFG4 0xf57a
+#define TSCFG4 REGx(R0900_P1_TSCFG4)
+#define F0900_P1_TSFIFO_TSSPEEDMODE 0xf57a00c0
/*P1_TSSPEED*/
-#define R0900_P1_TSSPEED 0xf580
-#define F0900_P1_TSFIFO_OUTSPEED 0xf58000ff
+#define R0900_P1_TSSPEED 0xf580
+#define TSSPEED REGx(R0900_P1_TSSPEED)
+#define F0900_P1_TSFIFO_OUTSPEED 0xf58000ff
/*P1_TSSTATUS*/
-#define R0900_P1_TSSTATUS 0xf581
-#define F0900_P1_TSFIFO_LINEOK 0xf5810080
-#define F0900_P1_TSFIFO_ERROR 0xf5810040
-#define F0900_P1_TSFIFO_DATA7 0xf5810020
-#define F0900_P1_TSFIFO_NOSYNC 0xf5810010
-#define F0900_P1_ISCR_INITIALIZED 0xf5810008
-#define F0900_P1_ISCR_UPDATED 0xf5810004
-#define F0900_P1_SOFFIFO_UNREGUL 0xf5810002
-#define F0900_P1_DIL_READY 0xf5810001
+#define R0900_P1_TSSTATUS 0xf581
+#define TSSTATUS REGx(R0900_P1_TSSTATUS)
+#define F0900_P1_TSFIFO_LINEOK 0xf5810080
+#define TSFIFO_LINEOK FLDx(F0900_P1_TSFIFO_LINEOK)
+#define F0900_P1_TSFIFO_ERROR 0xf5810040
+#define F0900_P1_DIL_READY 0xf5810001
/*P1_TSSTATUS2*/
-#define R0900_P1_TSSTATUS2 0xf582
-#define F0900_P1_TSFIFO_DEMODSEL 0xf5820080
-#define F0900_P1_TSFIFOSPEED_STORE 0xf5820040
-#define F0900_P1_DILXX_RESET 0xf5820020
-#define F0900_P1_TSSERIAL_IMPOS 0xf5820010
-#define F0900_P1_TSFIFO_LINENOK 0xf5820008
-#define F0900_P1_BITSPEED_EVENT 0xf5820004
-#define F0900_P1_SCRAMBDETECT 0xf5820002
-#define F0900_P1_ULDTV67_FALSELOCK 0xf5820001
+#define R0900_P1_TSSTATUS2 0xf582
+#define TSSTATUS2 REGx(R0900_P1_TSSTATUS2)
+#define F0900_P1_TSFIFO_DEMODSEL 0xf5820080
+#define F0900_P1_TSFIFOSPEED_STORE 0xf5820040
+#define F0900_P1_DILXX_RESET 0xf5820020
+#define F0900_P1_TSSERIAL_IMPOS 0xf5820010
+#define F0900_P1_SCRAMBDETECT 0xf5820002
/*P1_TSBITRATE1*/
-#define R0900_P1_TSBITRATE1 0xf583
-#define F0900_P1_TSFIFO_BITRATE1 0xf58300ff
+#define R0900_P1_TSBITRATE1 0xf583
+#define TSBITRATE1 REGx(R0900_P1_TSBITRATE1)
+#define F0900_P1_TSFIFO_BITRATE1 0xf58300ff
/*P1_TSBITRATE0*/
-#define R0900_P1_TSBITRATE0 0xf584
-#define F0900_P1_TSFIFO_BITRATE0 0xf58400ff
+#define R0900_P1_TSBITRATE0 0xf584
+#define TSBITRATE0 REGx(R0900_P1_TSBITRATE0)
+#define F0900_P1_TSFIFO_BITRATE0 0xf58400ff
/*P1_ERRCTRL1*/
-#define R0900_P1_ERRCTRL1 0xf598
-#define F0900_P1_ERR_SOURCE1 0xf59800f0
-#define F0900_P1_NUM_EVENT1 0xf5980007
+#define R0900_P1_ERRCTRL1 0xf598
+#define ERRCTRL1 REGx(R0900_P1_ERRCTRL1)
+#define F0900_P1_ERR_SOURCE1 0xf59800f0
+#define F0900_P1_NUM_EVENT1 0xf5980007
/*P1_ERRCNT12*/
-#define R0900_P1_ERRCNT12 0xf599
-#define F0900_P1_ERRCNT1_OLDVALUE 0xf5990080
-#define F0900_P1_ERR_CNT12 0xf599007f
+#define R0900_P1_ERRCNT12 0xf599
+#define ERRCNT12 REGx(R0900_P1_ERRCNT12)
+#define F0900_P1_ERRCNT1_OLDVALUE 0xf5990080
+#define F0900_P1_ERR_CNT12 0xf599007f
+#define ERR_CNT12 FLDx(F0900_P1_ERR_CNT12)
/*P1_ERRCNT11*/
-#define R0900_P1_ERRCNT11 0xf59a
-#define F0900_P1_ERR_CNT11 0xf59a00ff
+#define R0900_P1_ERRCNT11 0xf59a
+#define ERRCNT11 REGx(R0900_P1_ERRCNT11)
+#define F0900_P1_ERR_CNT11 0xf59a00ff
+#define ERR_CNT11 FLDx(F0900_P1_ERR_CNT11)
/*P1_ERRCNT10*/
-#define R0900_P1_ERRCNT10 0xf59b
-#define F0900_P1_ERR_CNT10 0xf59b00ff
+#define R0900_P1_ERRCNT10 0xf59b
+#define ERRCNT10 REGx(R0900_P1_ERRCNT10)
+#define F0900_P1_ERR_CNT10 0xf59b00ff
+#define ERR_CNT10 FLDx(F0900_P1_ERR_CNT10)
/*P1_ERRCTRL2*/
-#define R0900_P1_ERRCTRL2 0xf59c
-#define F0900_P1_ERR_SOURCE2 0xf59c00f0
-#define F0900_P1_NUM_EVENT2 0xf59c0007
+#define R0900_P1_ERRCTRL2 0xf59c
+#define ERRCTRL2 REGx(R0900_P1_ERRCTRL2)
+#define F0900_P1_ERR_SOURCE2 0xf59c00f0
+#define F0900_P1_NUM_EVENT2 0xf59c0007
/*P1_ERRCNT22*/
-#define R0900_P1_ERRCNT22 0xf59d
-#define F0900_P1_ERRCNT2_OLDVALUE 0xf59d0080
-#define F0900_P1_ERR_CNT22 0xf59d007f
+#define R0900_P1_ERRCNT22 0xf59d
+#define ERRCNT22 REGx(R0900_P1_ERRCNT22)
+#define F0900_P1_ERRCNT2_OLDVALUE 0xf59d0080
+#define F0900_P1_ERR_CNT22 0xf59d007f
+#define ERR_CNT22 FLDx(F0900_P1_ERR_CNT22)
/*P1_ERRCNT21*/
-#define R0900_P1_ERRCNT21 0xf59e
-#define F0900_P1_ERR_CNT21 0xf59e00ff
+#define R0900_P1_ERRCNT21 0xf59e
+#define ERRCNT21 REGx(R0900_P1_ERRCNT21)
+#define F0900_P1_ERR_CNT21 0xf59e00ff
+#define ERR_CNT21 FLDx(F0900_P1_ERR_CNT21)
/*P1_ERRCNT20*/
-#define R0900_P1_ERRCNT20 0xf59f
-#define F0900_P1_ERR_CNT20 0xf59f00ff
+#define R0900_P1_ERRCNT20 0xf59f
+#define ERRCNT20 REGx(R0900_P1_ERRCNT20)
+#define F0900_P1_ERR_CNT20 0xf59f00ff
+#define ERR_CNT20 FLDx(F0900_P1_ERR_CNT20)
/*P1_FECSPY*/
-#define R0900_P1_FECSPY 0xf5a0
-#define F0900_P1_SPY_ENABLE 0xf5a00080
-#define F0900_P1_NO_SYNCBYTE 0xf5a00040
-#define F0900_P1_SERIAL_MODE 0xf5a00020
-#define F0900_P1_UNUSUAL_PACKET 0xf5a00010
-#define F0900_P1_BER_PACKMODE 0xf5a00008
-#define F0900_P1_BERMETER_LMODE 0xf5a00002
-#define F0900_P1_BERMETER_RESET 0xf5a00001
+#define R0900_P1_FECSPY 0xf5a0
+#define FECSPY REGx(R0900_P1_FECSPY)
+#define F0900_P1_SPY_ENABLE 0xf5a00080
+#define F0900_P1_NO_SYNCBYTE 0xf5a00040
+#define F0900_P1_SERIAL_MODE 0xf5a00020
+#define F0900_P1_UNUSUAL_PACKET 0xf5a00010
+#define F0900_P1_BERMETER_DATAMODE 0xf5a00008
+#define F0900_P1_BERMETER_LMODE 0xf5a00002
+#define F0900_P1_BERMETER_RESET 0xf5a00001
/*P1_FSPYCFG*/
-#define R0900_P1_FSPYCFG 0xf5a1
-#define F0900_P1_FECSPY_INPUT 0xf5a100c0
-#define F0900_P1_RST_ON_ERROR 0xf5a10020
-#define F0900_P1_ONE_SHOT 0xf5a10010
-#define F0900_P1_I2C_MODE 0xf5a1000c
-#define F0900_P1_SPY_HYSTERESIS 0xf5a10003
+#define R0900_P1_FSPYCFG 0xf5a1
+#define FSPYCFG REGx(R0900_P1_FSPYCFG)
+#define F0900_P1_FECSPY_INPUT 0xf5a100c0
+#define F0900_P1_RST_ON_ERROR 0xf5a10020
+#define F0900_P1_ONE_SHOT 0xf5a10010
+#define F0900_P1_I2C_MODE 0xf5a1000c
+#define F0900_P1_SPY_HYSTERESIS 0xf5a10003
/*P1_FSPYDATA*/
-#define R0900_P1_FSPYDATA 0xf5a2
-#define F0900_P1_SPY_STUFFING 0xf5a20080
-#define F0900_P1_NOERROR_PKTJITTER 0xf5a20040
-#define F0900_P1_SPY_CNULLPKT 0xf5a20020
-#define F0900_P1_SPY_OUTDATA_MODE 0xf5a2001f
+#define R0900_P1_FSPYDATA 0xf5a2
+#define FSPYDATA REGx(R0900_P1_FSPYDATA)
+#define F0900_P1_SPY_STUFFING 0xf5a20080
+#define F0900_P1_SPY_CNULLPKT 0xf5a20020
+#define F0900_P1_SPY_OUTDATA_MODE 0xf5a2001f
/*P1_FSPYOUT*/
-#define R0900_P1_FSPYOUT 0xf5a3
-#define F0900_P1_FSPY_DIRECT 0xf5a30080
-#define F0900_P1_SPY_OUTDATA_BUS 0xf5a30038
-#define F0900_P1_STUFF_MODE 0xf5a30007
+#define R0900_P1_FSPYOUT 0xf5a3
+#define FSPYOUT REGx(R0900_P1_FSPYOUT)
+#define F0900_P1_FSPY_DIRECT 0xf5a30080
+#define F0900_P1_STUFF_MODE 0xf5a30007
/*P1_FSTATUS*/
-#define R0900_P1_FSTATUS 0xf5a4
-#define F0900_P1_SPY_ENDSIM 0xf5a40080
-#define F0900_P1_VALID_SIM 0xf5a40040
-#define F0900_P1_FOUND_SIGNAL 0xf5a40020
-#define F0900_P1_DSS_SYNCBYTE 0xf5a40010
-#define F0900_P1_RESULT_STATE 0xf5a4000f
+#define R0900_P1_FSTATUS 0xf5a4
+#define FSTATUS REGx(R0900_P1_FSTATUS)
+#define F0900_P1_SPY_ENDSIM 0xf5a40080
+#define F0900_P1_VALID_SIM 0xf5a40040
+#define F0900_P1_FOUND_SIGNAL 0xf5a40020
+#define F0900_P1_DSS_SYNCBYTE 0xf5a40010
+#define F0900_P1_RESULT_STATE 0xf5a4000f
/*P1_FBERCPT4*/
-#define R0900_P1_FBERCPT4 0xf5a8
-#define F0900_P1_FBERMETER_CPT4 0xf5a800ff
+#define R0900_P1_FBERCPT4 0xf5a8
+#define FBERCPT4 REGx(R0900_P1_FBERCPT4)
+#define F0900_P1_FBERMETER_CPT4 0xf5a800ff
/*P1_FBERCPT3*/
-#define R0900_P1_FBERCPT3 0xf5a9
-#define F0900_P1_FBERMETER_CPT3 0xf5a900ff
+#define R0900_P1_FBERCPT3 0xf5a9
+#define FBERCPT3 REGx(R0900_P1_FBERCPT3)
+#define F0900_P1_FBERMETER_CPT3 0xf5a900ff
/*P1_FBERCPT2*/
-#define R0900_P1_FBERCPT2 0xf5aa
-#define F0900_P1_FBERMETER_CPT2 0xf5aa00ff
+#define R0900_P1_FBERCPT2 0xf5aa
+#define FBERCPT2 REGx(R0900_P1_FBERCPT2)
+#define F0900_P1_FBERMETER_CPT2 0xf5aa00ff
/*P1_FBERCPT1*/
-#define R0900_P1_FBERCPT1 0xf5ab
-#define F0900_P1_FBERMETER_CPT1 0xf5ab00ff
+#define R0900_P1_FBERCPT1 0xf5ab
+#define FBERCPT1 REGx(R0900_P1_FBERCPT1)
+#define F0900_P1_FBERMETER_CPT1 0xf5ab00ff
/*P1_FBERCPT0*/
-#define R0900_P1_FBERCPT0 0xf5ac
-#define F0900_P1_FBERMETER_CPT0 0xf5ac00ff
+#define R0900_P1_FBERCPT0 0xf5ac
+#define FBERCPT0 REGx(R0900_P1_FBERCPT0)
+#define F0900_P1_FBERMETER_CPT0 0xf5ac00ff
/*P1_FBERERR2*/
-#define R0900_P1_FBERERR2 0xf5ad
-#define F0900_P1_FBERMETER_ERR2 0xf5ad00ff
+#define R0900_P1_FBERERR2 0xf5ad
+#define FBERERR2 REGx(R0900_P1_FBERERR2)
+#define F0900_P1_FBERMETER_ERR2 0xf5ad00ff
/*P1_FBERERR1*/
-#define R0900_P1_FBERERR1 0xf5ae
-#define F0900_P1_FBERMETER_ERR1 0xf5ae00ff
+#define R0900_P1_FBERERR1 0xf5ae
+#define FBERERR1 REGx(R0900_P1_FBERERR1)
+#define F0900_P1_FBERMETER_ERR1 0xf5ae00ff
/*P1_FBERERR0*/
-#define R0900_P1_FBERERR0 0xf5af
-#define F0900_P1_FBERMETER_ERR0 0xf5af00ff
+#define R0900_P1_FBERERR0 0xf5af
+#define FBERERR0 REGx(R0900_P1_FBERERR0)
+#define F0900_P1_FBERMETER_ERR0 0xf5af00ff
/*P1_FSPYBER*/
-#define R0900_P1_FSPYBER 0xf5b2
-#define F0900_P1_FSPYOBS_XORREAD 0xf5b20040
-#define F0900_P1_FSPYBER_OBSMODE 0xf5b20020
-#define F0900_P1_FSPYBER_SYNCBYTE 0xf5b20010
-#define F0900_P1_FSPYBER_UNSYNC 0xf5b20008
-#define F0900_P1_FSPYBER_CTIME 0xf5b20007
+#define R0900_P1_FSPYBER 0xf5b2
+#define FSPYBER REGx(R0900_P1_FSPYBER)
+#define F0900_P1_FSPYBER_SYNCBYTE 0xf5b20010
+#define F0900_P1_FSPYBER_UNSYNC 0xf5b20008
+#define F0900_P1_FSPYBER_CTIME 0xf5b20007
-/*RCCFGH*/
-#define R0900_RCCFGH 0xf600
-#define F0900_TSRCFIFO_DVBCI 0xf6000080
-#define F0900_TSRCFIFO_SERIAL 0xf6000040
-#define F0900_TSRCFIFO_DISABLE 0xf6000020
-#define F0900_TSFIFO_2TORC 0xf6000010
-#define F0900_TSRCFIFO_HSGNLOUT 0xf6000008
-#define F0900_TSRCFIFO_ERRMODE 0xf6000006
+/*RCCFG2*/
+#define R0900_RCCFG2 0xf600
/*TSGENERAL*/
-#define R0900_TSGENERAL 0xf630
-#define F0900_TSFIFO_BCLK1ALL 0xf6300020
-#define F0900_MUXSTREAM_OUTMODE 0xf6300008
-#define F0900_TSFIFO_PERMPARAL 0xf6300006
-#define F0900_RST_REEDSOLO 0xf6300001
+#define R0900_TSGENERAL 0xf630
+#define F0900_TSFIFO_DISTS2PAR 0xf6300040
+#define F0900_MUXSTREAM_OUTMODE 0xf6300008
+#define F0900_TSFIFO_PERMPARAL 0xf6300006
/*TSGENERAL1X*/
-#define R0900_TSGENERAL1X 0xf670
-#define F0900_TSFIFO1X_BCLK1ALL 0xf6700020
-#define F0900_MUXSTREAM1X_OUTMODE 0xf6700008
-#define F0900_TSFIFO1X_PERMPARAL 0xf6700006
-#define F0900_RST1X_REEDSOLO 0xf6700001
+#define R0900_TSGENERAL1X 0xf670
/*NBITER_NF4*/
-#define R0900_NBITER_NF4 0xfa03
-#define F0900_NBITER_NF_QP_1_2 0xfa0300ff
+#define R0900_NBITER_NF4 0xfa03
+#define F0900_NBITER_NF_QP_1_2 0xfa0300ff
/*NBITER_NF5*/
-#define R0900_NBITER_NF5 0xfa04
-#define F0900_NBITER_NF_QP_3_5 0xfa0400ff
+#define R0900_NBITER_NF5 0xfa04
+#define F0900_NBITER_NF_QP_3_5 0xfa0400ff
/*NBITER_NF6*/
-#define R0900_NBITER_NF6 0xfa05
-#define F0900_NBITER_NF_QP_2_3 0xfa0500ff
+#define R0900_NBITER_NF6 0xfa05
+#define F0900_NBITER_NF_QP_2_3 0xfa0500ff
/*NBITER_NF7*/
-#define R0900_NBITER_NF7 0xfa06
-#define F0900_NBITER_NF_QP_3_4 0xfa0600ff
+#define R0900_NBITER_NF7 0xfa06
+#define F0900_NBITER_NF_QP_3_4 0xfa0600ff
/*NBITER_NF8*/
-#define R0900_NBITER_NF8 0xfa07
-#define F0900_NBITER_NF_QP_4_5 0xfa0700ff
+#define R0900_NBITER_NF8 0xfa07
+#define F0900_NBITER_NF_QP_4_5 0xfa0700ff
/*NBITER_NF9*/
-#define R0900_NBITER_NF9 0xfa08
-#define F0900_NBITER_NF_QP_5_6 0xfa0800ff
+#define R0900_NBITER_NF9 0xfa08
+#define F0900_NBITER_NF_QP_5_6 0xfa0800ff
/*NBITER_NF10*/
-#define R0900_NBITER_NF10 0xfa09
-#define F0900_NBITER_NF_QP_8_9 0xfa0900ff
+#define R0900_NBITER_NF10 0xfa09
+#define F0900_NBITER_NF_QP_8_9 0xfa0900ff
/*NBITER_NF11*/
-#define R0900_NBITER_NF11 0xfa0a
-#define F0900_NBITER_NF_QP_9_10 0xfa0a00ff
+#define R0900_NBITER_NF11 0xfa0a
+#define F0900_NBITER_NF_QP_9_10 0xfa0a00ff
/*NBITER_NF12*/
-#define R0900_NBITER_NF12 0xfa0b
-#define F0900_NBITER_NF_8P_3_5 0xfa0b00ff
+#define R0900_NBITER_NF12 0xfa0b
+#define F0900_NBITER_NF_8P_3_5 0xfa0b00ff
/*NBITER_NF13*/
-#define R0900_NBITER_NF13 0xfa0c
-#define F0900_NBITER_NF_8P_2_3 0xfa0c00ff
+#define R0900_NBITER_NF13 0xfa0c
+#define F0900_NBITER_NF_8P_2_3 0xfa0c00ff
/*NBITER_NF14*/
-#define R0900_NBITER_NF14 0xfa0d
-#define F0900_NBITER_NF_8P_3_4 0xfa0d00ff
+#define R0900_NBITER_NF14 0xfa0d
+#define F0900_NBITER_NF_8P_3_4 0xfa0d00ff
/*NBITER_NF15*/
-#define R0900_NBITER_NF15 0xfa0e
-#define F0900_NBITER_NF_8P_5_6 0xfa0e00ff
+#define R0900_NBITER_NF15 0xfa0e
+#define F0900_NBITER_NF_8P_5_6 0xfa0e00ff
/*NBITER_NF16*/
-#define R0900_NBITER_NF16 0xfa0f
-#define F0900_NBITER_NF_8P_8_9 0xfa0f00ff
+#define R0900_NBITER_NF16 0xfa0f
+#define F0900_NBITER_NF_8P_8_9 0xfa0f00ff
/*NBITER_NF17*/
-#define R0900_NBITER_NF17 0xfa10
-#define F0900_NBITER_NF_8P_9_10 0xfa1000ff
+#define R0900_NBITER_NF17 0xfa10
+#define F0900_NBITER_NF_8P_9_10 0xfa1000ff
/*NBITERNOERR*/
-#define R0900_NBITERNOERR 0xfa3f
-#define F0900_NBITER_STOP_CRIT 0xfa3f000f
+#define R0900_NBITERNOERR 0xfa3f
+#define F0900_NBITER_STOP_CRIT 0xfa3f000f
/*GAINLLR_NF4*/
-#define R0900_GAINLLR_NF4 0xfa43
-#define F0900_GAINLLR_NF_QP_1_2 0xfa43007f
+#define R0900_GAINLLR_NF4 0xfa43
+#define F0900_GAINLLR_NF_QP_1_2 0xfa43007f
/*GAINLLR_NF5*/
-#define R0900_GAINLLR_NF5 0xfa44
-#define F0900_GAINLLR_NF_QP_3_5 0xfa44007f
+#define R0900_GAINLLR_NF5 0xfa44
+#define F0900_GAINLLR_NF_QP_3_5 0xfa44007f
/*GAINLLR_NF6*/
-#define R0900_GAINLLR_NF6 0xfa45
-#define F0900_GAINLLR_NF_QP_2_3 0xfa45007f
+#define R0900_GAINLLR_NF6 0xfa45
+#define F0900_GAINLLR_NF_QP_2_3 0xfa45007f
/*GAINLLR_NF7*/
-#define R0900_GAINLLR_NF7 0xfa46
-#define F0900_GAINLLR_NF_QP_3_4 0xfa46007f
+#define R0900_GAINLLR_NF7 0xfa46
+#define F0900_GAINLLR_NF_QP_3_4 0xfa46007f
/*GAINLLR_NF8*/
-#define R0900_GAINLLR_NF8 0xfa47
-#define F0900_GAINLLR_NF_QP_4_5 0xfa47007f
+#define R0900_GAINLLR_NF8 0xfa47
+#define F0900_GAINLLR_NF_QP_4_5 0xfa47007f
/*GAINLLR_NF9*/
-#define R0900_GAINLLR_NF9 0xfa48
-#define F0900_GAINLLR_NF_QP_5_6 0xfa48007f
+#define R0900_GAINLLR_NF9 0xfa48
+#define F0900_GAINLLR_NF_QP_5_6 0xfa48007f
/*GAINLLR_NF10*/
-#define R0900_GAINLLR_NF10 0xfa49
-#define F0900_GAINLLR_NF_QP_8_9 0xfa49007f
+#define R0900_GAINLLR_NF10 0xfa49
+#define F0900_GAINLLR_NF_QP_8_9 0xfa49007f
/*GAINLLR_NF11*/
-#define R0900_GAINLLR_NF11 0xfa4a
-#define F0900_GAINLLR_NF_QP_9_10 0xfa4a007f
+#define R0900_GAINLLR_NF11 0xfa4a
+#define F0900_GAINLLR_NF_QP_9_10 0xfa4a007f
/*GAINLLR_NF12*/
-#define R0900_GAINLLR_NF12 0xfa4b
-#define F0900_GAINLLR_NF_8P_3_5 0xfa4b007f
+#define R0900_GAINLLR_NF12 0xfa4b
+#define F0900_GAINLLR_NF_8P_3_5 0xfa4b007f
/*GAINLLR_NF13*/
-#define R0900_GAINLLR_NF13 0xfa4c
-#define F0900_GAINLLR_NF_8P_2_3 0xfa4c007f
+#define R0900_GAINLLR_NF13 0xfa4c
+#define F0900_GAINLLR_NF_8P_2_3 0xfa4c007f
/*GAINLLR_NF14*/
-#define R0900_GAINLLR_NF14 0xfa4d
-#define F0900_GAINLLR_NF_8P_3_4 0xfa4d007f
+#define R0900_GAINLLR_NF14 0xfa4d
+#define F0900_GAINLLR_NF_8P_3_4 0xfa4d007f
/*GAINLLR_NF15*/
-#define R0900_GAINLLR_NF15 0xfa4e
-#define F0900_GAINLLR_NF_8P_5_6 0xfa4e007f
+#define R0900_GAINLLR_NF15 0xfa4e
+#define F0900_GAINLLR_NF_8P_5_6 0xfa4e007f
/*GAINLLR_NF16*/
-#define R0900_GAINLLR_NF16 0xfa4f
-#define F0900_GAINLLR_NF_8P_8_9 0xfa4f007f
+#define R0900_GAINLLR_NF16 0xfa4f
+#define F0900_GAINLLR_NF_8P_8_9 0xfa4f007f
/*GAINLLR_NF17*/
-#define R0900_GAINLLR_NF17 0xfa50
-#define F0900_GAINLLR_NF_8P_9_10 0xfa50007f
+#define R0900_GAINLLR_NF17 0xfa50
+#define F0900_GAINLLR_NF_8P_9_10 0xfa50007f
/*CFGEXT*/
-#define R0900_CFGEXT 0xfa80
-#define F0900_STAGMODE 0xfa800080
-#define F0900_BYPBCH 0xfa800040
-#define F0900_BYPLDPC 0xfa800020
-#define F0900_LDPCMODE 0xfa800010
-#define F0900_INVLLRSIGN 0xfa800008
-#define F0900_SHORTMULT 0xfa800004
-#define F0900_EXTERNTX 0xfa800001
+#define R0900_CFGEXT 0xfa80
+#define F0900_STAGMODE 0xfa800080
+#define F0900_BYPBCH 0xfa800040
+#define F0900_BYPLDPC 0xfa800020
+#define F0900_LDPCMODE 0xfa800010
+#define F0900_INVLLRSIGN 0xfa800008
+#define F0900_SHORTMULT 0xfa800004
+#define F0900_EXTERNTX 0xfa800001
/*GENCFG*/
-#define R0900_GENCFG 0xfa86
-#define F0900_BROADCAST 0xfa860010
-#define F0900_NOSHFRD2 0xfa860008
-#define F0900_BCHERRFLAG 0xfa860004
-#define F0900_PRIORITY 0xfa860002
-#define F0900_DDEMOD 0xfa860001
+#define R0900_GENCFG 0xfa86
+#define F0900_BROADCAST 0xfa860010
+#define F0900_PRIORITY 0xfa860002
+#define F0900_DDEMOD 0xfa860001
/*LDPCERR1*/
-#define R0900_LDPCERR1 0xfa96
-#define F0900_LDPC_ERRORS_COUNTER1 0xfa9600ff
+#define R0900_LDPCERR1 0xfa96
+#define F0900_LDPC_ERRORS_COUNTER1 0xfa9600ff
/*LDPCERR0*/
-#define R0900_LDPCERR0 0xfa97
-#define F0900_LDPC_ERRORS_COUNTER0 0xfa9700ff
+#define R0900_LDPCERR0 0xfa97
+#define F0900_LDPC_ERRORS_COUNTER0 0xfa9700ff
/*BCHERR*/
-#define R0900_BCHERR 0xfa98
-#define F0900_ERRORFLAG 0xfa980010
-#define F0900_BCH_ERRORS_COUNTER 0xfa98000f
+#define R0900_BCHERR 0xfa98
+#define F0900_ERRORFLAG 0xfa980010
+#define F0900_BCH_ERRORS_COUNTER 0xfa98000f
/*TSTRES0*/
-#define R0900_TSTRES0 0xff11
-#define F0900_FRESFEC 0xff110080
-#define F0900_FRESTS 0xff110040
-#define F0900_FRESVIT1 0xff110020
-#define F0900_FRESVIT2 0xff110010
-#define F0900_FRESSYM1 0xff110008
-#define F0900_FRESSYM2 0xff110004
-#define F0900_FRESMAS 0xff110002
-#define F0900_FRESINT 0xff110001
+#define R0900_TSTRES0 0xff11
+#define F0900_FRESFEC 0xff110080
+
+/*P2_TCTL4*/
+#define R0900_P2_TCTL4 0xff28
+#define F0900_P2_PN4_SELECT 0xff280020
+
+/*P1_TCTL4*/
+#define R0900_P1_TCTL4 0xff48
+#define TCTL4 shiftx(R0900_P1_TCTL4, demod, 0x20)
+#define F0900_P1_PN4_SELECT 0xff480020
/*P2_TSTDISRX*/
-#define R0900_P2_TSTDISRX 0xff65
-#define F0900_P2_EN_DISRX 0xff650080
-#define F0900_P2_TST_CURRSRC 0xff650040
-#define F0900_P2_IN_DIGSIGNAL 0xff650020
-#define F0900_P2_HIZ_CURRENTSRC 0xff650010
-#define F0900_TST_P2_PIN_SELECT 0xff650008
-#define F0900_P2_TST_DISRX 0xff650007
+#define R0900_P2_TSTDISRX 0xff65
+#define F0900_P2_PIN_SELECT1 0xff650008
/*P1_TSTDISRX*/
-#define R0900_P1_TSTDISRX 0xff67
-#define F0900_P1_EN_DISRX 0xff670080
-#define F0900_P1_TST_CURRSRC 0xff670040
-#define F0900_P1_IN_DIGSIGNAL 0xff670020
-#define F0900_P1_HIZ_CURRENTSRC 0xff670010
-#define F0900_TST_P1_PIN_SELECT 0xff670008
-#define F0900_P1_TST_DISRX 0xff670007
+#define R0900_P1_TSTDISRX 0xff67
+#define TSTDISRX shiftx(R0900_P1_TSTDISRX, demod, 2)
+#define F0900_P1_PIN_SELECT1 0xff670008
+#define PIN_SELECT1 shiftx(F0900_P1_PIN_SELECT1, demod, 0x20000)
-#define STV0900_NBREGS 684
-#define STV0900_NBFIELDS 1702
+#define STV0900_NBREGS 723
+#define STV0900_NBFIELDS 1420
#endif
diff --git a/drivers/media/dvb/frontends/stv0900_sw.c b/drivers/media/dvb/frontends/stv0900_sw.c
index 962fde1..b8da87f 100644
--- a/drivers/media/dvb/frontends/stv0900_sw.c
+++ b/drivers/media/dvb/frontends/stv0900_sw.c
@@ -27,56 +27,45 @@
#include "stv0900_reg.h"
#include "stv0900_priv.h"
-int stv0900_check_signal_presence(struct stv0900_internal *i_params,
+s32 shiftx(s32 x, int demod, s32 shift)
+{
+ if (demod == 1)
+ return x - shift;
+
+ return x;
+}
+
+int stv0900_check_signal_presence(struct stv0900_internal *intp,
enum fe_stv0900_demod_num demod)
{
- s32 carr_offset,
- agc2_integr,
- max_carrier;
+ s32 carr_offset,
+ agc2_integr,
+ max_carrier;
- int no_signal;
+ int no_signal = FALSE;
- switch (demod) {
- case STV0900_DEMOD_1:
- default:
- carr_offset = (stv0900_read_reg(i_params, R0900_P1_CFR2) << 8)
- | stv0900_read_reg(i_params,
- R0900_P1_CFR1);
- carr_offset = ge2comp(carr_offset, 16);
- agc2_integr = (stv0900_read_reg(i_params, R0900_P1_AGC2I1) << 8)
- | stv0900_read_reg(i_params,
- R0900_P1_AGC2I0);
- max_carrier = i_params->dmd1_srch_range / 1000;
- break;
- case STV0900_DEMOD_2:
- carr_offset = (stv0900_read_reg(i_params, R0900_P2_CFR2) << 8)
- | stv0900_read_reg(i_params,
- R0900_P2_CFR1);
- carr_offset = ge2comp(carr_offset, 16);
- agc2_integr = (stv0900_read_reg(i_params, R0900_P2_AGC2I1) << 8)
- | stv0900_read_reg(i_params,
- R0900_P2_AGC2I0);
- max_carrier = i_params->dmd2_srch_range / 1000;
- break;
- }
+ carr_offset = (stv0900_read_reg(intp, CFR2) << 8)
+ | stv0900_read_reg(intp, CFR1);
+ carr_offset = ge2comp(carr_offset, 16);
+ agc2_integr = (stv0900_read_reg(intp, AGC2I1) << 8)
+ | stv0900_read_reg(intp, AGC2I0);
+ max_carrier = intp->srch_range[demod] / 1000;
max_carrier += (max_carrier / 10);
max_carrier = 65536 * (max_carrier / 2);
- max_carrier /= i_params->mclk / 1000;
+ max_carrier /= intp->mclk / 1000;
if (max_carrier > 0x4000)
max_carrier = 0x4000;
if ((agc2_integr > 0x2000)
- || (carr_offset > + 2*max_carrier)
- || (carr_offset < -2*max_carrier))
+ || (carr_offset > (2 * max_carrier))
+ || (carr_offset < (-2 * max_carrier)))
no_signal = TRUE;
- else
- no_signal = FALSE;
return no_signal;
}
-static void stv0900_get_sw_loop_params(struct stv0900_internal *i_params,
+static void stv0900_get_sw_loop_params(struct stv0900_internal *intp,
s32 *frequency_inc, s32 *sw_timeout,
s32 *steps,
enum fe_stv0900_demod_num demod)
@@ -85,30 +74,19 @@
enum fe_stv0900_search_standard standard;
- switch (demod) {
- case STV0900_DEMOD_1:
- default:
- srate = i_params->dmd1_symbol_rate;
- max_carrier = i_params->dmd1_srch_range / 1000;
- max_carrier += max_carrier / 10;
- standard = i_params->dmd1_srch_standard;
- break;
- case STV0900_DEMOD_2:
- srate = i_params->dmd2_symbol_rate;
- max_carrier = i_params->dmd2_srch_range / 1000;
- max_carrier += max_carrier / 10;
- standard = i_params->dmd2_srch_stndrd;
- break;
- }
+ srate = intp->symbol_rate[demod];
+ max_carrier = intp->srch_range[demod] / 1000;
+ max_carrier += max_carrier / 10;
+ standard = intp->srch_standard[demod];
max_carrier = 65536 * (max_carrier / 2);
- max_carrier /= i_params->mclk / 1000;
+ max_carrier /= intp->mclk / 1000;
if (max_carrier > 0x4000)
max_carrier = 0x4000;
freq_inc = srate;
- freq_inc /= i_params->mclk >> 10;
+ freq_inc /= intp->mclk >> 10;
freq_inc = freq_inc << 6;
switch (standard) {
@@ -154,7 +132,7 @@
}
-static int stv0900_search_carr_sw_loop(struct stv0900_internal *i_params,
+static int stv0900_search_carr_sw_loop(struct stv0900_internal *intp,
s32 FreqIncr, s32 Timeout, int zigzag,
s32 MaxStep, enum fe_stv0900_demod_num demod)
{
@@ -164,20 +142,11 @@
freqOffset,
max_carrier;
- switch (demod) {
- case STV0900_DEMOD_1:
- default:
- max_carrier = i_params->dmd1_srch_range / 1000;
- max_carrier += (max_carrier / 10);
- break;
- case STV0900_DEMOD_2:
- max_carrier = i_params->dmd2_srch_range / 1000;
- max_carrier += (max_carrier / 10);
- break;
- }
+ max_carrier = intp->srch_range[demod] / 1000;
+ max_carrier += (max_carrier / 10);
max_carrier = 65536 * (max_carrier / 2);
- max_carrier /= i_params->mclk / 1000;
+ max_carrier /= intp->mclk / 1000;
if (max_carrier > 0x4000)
max_carrier = 0x4000;
@@ -190,40 +159,15 @@
stepCpt = 0;
do {
- switch (demod) {
- case STV0900_DEMOD_1:
- default:
- stv0900_write_reg(i_params, R0900_P1_DMDISTATE, 0x1C);
- stv0900_write_reg(i_params, R0900_P1_CFRINIT1,
- (freqOffset / 256) & 0xFF);
- stv0900_write_reg(i_params, R0900_P1_CFRINIT0,
- freqOffset & 0xFF);
- stv0900_write_reg(i_params, R0900_P1_DMDISTATE, 0x18);
- stv0900_write_bits(i_params, F0900_P1_ALGOSWRST, 1);
+ stv0900_write_reg(intp, DMDISTATE, 0x1c);
+ stv0900_write_reg(intp, CFRINIT1, (freqOffset / 256) & 0xff);
+ stv0900_write_reg(intp, CFRINIT0, freqOffset & 0xff);
+ stv0900_write_reg(intp, DMDISTATE, 0x18);
+ stv0900_write_bits(intp, ALGOSWRST, 1);
- if (i_params->chip_id == 0x12) {
- stv0900_write_bits(i_params,
- F0900_P1_RST_HWARE, 1);
- stv0900_write_bits(i_params,
- F0900_P1_RST_HWARE, 0);
- }
- break;
- case STV0900_DEMOD_2:
- stv0900_write_reg(i_params, R0900_P2_DMDISTATE, 0x1C);
- stv0900_write_reg(i_params, R0900_P2_CFRINIT1,
- (freqOffset / 256) & 0xFF);
- stv0900_write_reg(i_params, R0900_P2_CFRINIT0,
- freqOffset & 0xFF);
- stv0900_write_reg(i_params, R0900_P2_DMDISTATE, 0x18);
- stv0900_write_bits(i_params, F0900_P2_ALGOSWRST, 1);
-
- if (i_params->chip_id == 0x12) {
- stv0900_write_bits(i_params,
- F0900_P2_RST_HWARE, 1);
- stv0900_write_bits(i_params,
- F0900_P2_RST_HWARE, 0);
- }
- break;
+ if (intp->chip_id == 0x12) {
+ stv0900_write_bits(intp, RST_HWARE, 1);
+ stv0900_write_bits(intp, RST_HWARE, 0);
}
if (zigzag == TRUE) {
@@ -235,8 +179,8 @@
freqOffset += + 2 * FreqIncr;
stepCpt++;
- lock = stv0900_get_demod_lock(i_params, demod, Timeout);
- no_signal = stv0900_check_signal_presence(i_params, demod);
+ lock = stv0900_get_demod_lock(intp, demod, Timeout);
+ no_signal = stv0900_check_signal_presence(intp, demod);
} while ((lock == FALSE)
&& (no_signal == FALSE)
@@ -244,269 +188,138 @@
&& ((freqOffset + FreqIncr) > -max_carrier)
&& (stepCpt < MaxStep));
- switch (demod) {
- case STV0900_DEMOD_1:
- default:
- stv0900_write_bits(i_params, F0900_P1_ALGOSWRST, 0);
- break;
- case STV0900_DEMOD_2:
- stv0900_write_bits(i_params, F0900_P2_ALGOSWRST, 0);
- break;
- }
+ stv0900_write_bits(intp, ALGOSWRST, 0);
return lock;
}
-int stv0900_sw_algo(struct stv0900_internal *i_params,
+int stv0900_sw_algo(struct stv0900_internal *intp,
enum fe_stv0900_demod_num demod)
{
- int lock = FALSE;
+ int lock = FALSE,
+ no_signal,
+ zigzag;
+ s32 s2fw,
+ fqc_inc,
+ sft_stp_tout,
+ trial_cntr,
+ max_steps;
- int no_signal,
- zigzag;
- s32 dvbs2_fly_wheel;
-
- s32 freqIncrement, softStepTimeout, trialCounter, max_steps;
-
- stv0900_get_sw_loop_params(i_params, &freqIncrement, &softStepTimeout,
+ stv0900_get_sw_loop_params(intp, &fqc_inc, &sft_stp_tout,
&max_steps, demod);
- switch (demod) {
- case STV0900_DEMOD_1:
- default:
- switch (i_params->dmd1_srch_standard) {
- case STV0900_SEARCH_DVBS1:
- case STV0900_SEARCH_DSS:
- if (i_params->chip_id >= 0x20)
- stv0900_write_reg(i_params, R0900_P1_CARFREQ,
- 0x3B);
- else
- stv0900_write_reg(i_params, R0900_P1_CARFREQ,
- 0xef);
+ switch (intp->srch_standard[demod]) {
+ case STV0900_SEARCH_DVBS1:
+ case STV0900_SEARCH_DSS:
+ if (intp->chip_id >= 0x20)
+ stv0900_write_reg(intp, CARFREQ, 0x3b);
+ else
+ stv0900_write_reg(intp, CARFREQ, 0xef);
- stv0900_write_reg(i_params, R0900_P1_DMDCFGMD, 0x49);
- zigzag = FALSE;
- break;
- case STV0900_SEARCH_DVBS2:
- if (i_params->chip_id >= 0x20)
- stv0900_write_reg(i_params, R0900_P1_CORRELABS,
- 0x79);
- else
- stv0900_write_reg(i_params, R0900_P1_CORRELABS,
- 0x68);
-
- stv0900_write_reg(i_params, R0900_P1_DMDCFGMD,
- 0x89);
-
- zigzag = TRUE;
- break;
- case STV0900_AUTO_SEARCH:
- default:
- if (i_params->chip_id >= 0x20) {
- stv0900_write_reg(i_params, R0900_P1_CARFREQ,
- 0x3B);
- stv0900_write_reg(i_params, R0900_P1_CORRELABS,
- 0x79);
- } else {
- stv0900_write_reg(i_params, R0900_P1_CARFREQ,
- 0xef);
- stv0900_write_reg(i_params, R0900_P1_CORRELABS,
- 0x68);
- }
-
- stv0900_write_reg(i_params, R0900_P1_DMDCFGMD,
- 0xc9);
- zigzag = FALSE;
- break;
- }
-
- trialCounter = 0;
- do {
- lock = stv0900_search_carr_sw_loop(i_params,
- freqIncrement,
- softStepTimeout,
- zigzag,
- max_steps,
- demod);
- no_signal = stv0900_check_signal_presence(i_params,
- demod);
- trialCounter++;
- if ((lock == TRUE)
- || (no_signal == TRUE)
- || (trialCounter == 2)) {
-
- if (i_params->chip_id >= 0x20) {
- stv0900_write_reg(i_params,
- R0900_P1_CARFREQ,
- 0x49);
- stv0900_write_reg(i_params,
- R0900_P1_CORRELABS,
- 0x9e);
- } else {
- stv0900_write_reg(i_params,
- R0900_P1_CARFREQ,
- 0xed);
- stv0900_write_reg(i_params,
- R0900_P1_CORRELABS,
- 0x88);
- }
-
- if ((lock == TRUE) && (stv0900_get_bits(i_params, F0900_P1_HEADER_MODE) == STV0900_DVBS2_FOUND)) {
- msleep(softStepTimeout);
- dvbs2_fly_wheel = stv0900_get_bits(i_params, F0900_P1_FLYWHEEL_CPT);
-
- if (dvbs2_fly_wheel < 0xd) {
- msleep(softStepTimeout);
- dvbs2_fly_wheel = stv0900_get_bits(i_params, F0900_P1_FLYWHEEL_CPT);
- }
-
- if (dvbs2_fly_wheel < 0xd) {
- lock = FALSE;
-
- if (trialCounter < 2) {
- if (i_params->chip_id >= 0x20)
- stv0900_write_reg(i_params, R0900_P1_CORRELABS, 0x79);
- else
- stv0900_write_reg(i_params, R0900_P1_CORRELABS, 0x68);
-
- stv0900_write_reg(i_params, R0900_P1_DMDCFGMD, 0x89);
- }
- }
- }
- }
-
- } while ((lock == FALSE)
- && (trialCounter < 2)
- && (no_signal == FALSE));
-
+ stv0900_write_reg(intp, DMDCFGMD, 0x49);
+ zigzag = FALSE;
break;
- case STV0900_DEMOD_2:
- switch (i_params->dmd2_srch_stndrd) {
- case STV0900_SEARCH_DVBS1:
- case STV0900_SEARCH_DSS:
- if (i_params->chip_id >= 0x20)
- stv0900_write_reg(i_params, R0900_P2_CARFREQ,
- 0x3b);
- else
- stv0900_write_reg(i_params, R0900_P2_CARFREQ,
- 0xef);
+ case STV0900_SEARCH_DVBS2:
+ if (intp->chip_id >= 0x20)
+ stv0900_write_reg(intp, CORRELABS, 0x79);
+ else
+ stv0900_write_reg(intp, CORRELABS, 0x68);
- stv0900_write_reg(i_params, R0900_P2_DMDCFGMD,
- 0x49);
- zigzag = FALSE;
- break;
- case STV0900_SEARCH_DVBS2:
- if (i_params->chip_id >= 0x20)
- stv0900_write_reg(i_params, R0900_P2_CORRELABS,
- 0x79);
- else
- stv0900_write_reg(i_params, R0900_P2_CORRELABS,
- 0x68);
+ stv0900_write_reg(intp, DMDCFGMD, 0x89);
- stv0900_write_reg(i_params, R0900_P2_DMDCFGMD, 0x89);
- zigzag = TRUE;
- break;
- case STV0900_AUTO_SEARCH:
- default:
- if (i_params->chip_id >= 0x20) {
- stv0900_write_reg(i_params, R0900_P2_CARFREQ,
- 0x3b);
- stv0900_write_reg(i_params, R0900_P2_CORRELABS,
- 0x79);
- } else {
- stv0900_write_reg(i_params, R0900_P2_CARFREQ,
- 0xef);
- stv0900_write_reg(i_params, R0900_P2_CORRELABS,
- 0x68);
- }
-
- stv0900_write_reg(i_params, R0900_P2_DMDCFGMD, 0xc9);
-
- zigzag = FALSE;
- break;
+ zigzag = TRUE;
+ break;
+ case STV0900_AUTO_SEARCH:
+ default:
+ if (intp->chip_id >= 0x20) {
+ stv0900_write_reg(intp, CARFREQ, 0x3b);
+ stv0900_write_reg(intp, CORRELABS, 0x79);
+ } else {
+ stv0900_write_reg(intp, CARFREQ, 0xef);
+ stv0900_write_reg(intp, CORRELABS, 0x68);
}
- trialCounter = 0;
-
- do {
- lock = stv0900_search_carr_sw_loop(i_params,
- freqIncrement,
- softStepTimeout,
- zigzag,
- max_steps,
- demod);
- no_signal = stv0900_check_signal_presence(i_params,
- demod);
- trialCounter++;
- if ((lock == TRUE)
- || (no_signal == TRUE)
- || (trialCounter == 2)) {
- if (i_params->chip_id >= 0x20) {
- stv0900_write_reg(i_params,
- R0900_P2_CARFREQ,
- 0x49);
- stv0900_write_reg(i_params,
- R0900_P2_CORRELABS,
- 0x9e);
- } else {
- stv0900_write_reg(i_params,
- R0900_P2_CARFREQ,
- 0xed);
- stv0900_write_reg(i_params,
- R0900_P2_CORRELABS,
- 0x88);
- }
-
- if ((lock == TRUE) && (stv0900_get_bits(i_params, F0900_P2_HEADER_MODE) == STV0900_DVBS2_FOUND)) {
- msleep(softStepTimeout);
- dvbs2_fly_wheel = stv0900_get_bits(i_params, F0900_P2_FLYWHEEL_CPT);
- if (dvbs2_fly_wheel < 0xd) {
- msleep(softStepTimeout);
- dvbs2_fly_wheel = stv0900_get_bits(i_params, F0900_P2_FLYWHEEL_CPT);
- }
-
- if (dvbs2_fly_wheel < 0xd) {
- lock = FALSE;
- if (trialCounter < 2) {
- if (i_params->chip_id >= 0x20)
- stv0900_write_reg(i_params, R0900_P2_CORRELABS, 0x79);
- else
- stv0900_write_reg(i_params, R0900_P2_CORRELABS, 0x68);
-
- stv0900_write_reg(i_params, R0900_P2_DMDCFGMD, 0x89);
- }
- }
- }
- }
-
- } while ((lock == FALSE) && (trialCounter < 2) && (no_signal == FALSE));
-
+ stv0900_write_reg(intp, DMDCFGMD, 0xc9);
+ zigzag = FALSE;
break;
}
+ trial_cntr = 0;
+ do {
+ lock = stv0900_search_carr_sw_loop(intp,
+ fqc_inc,
+ sft_stp_tout,
+ zigzag,
+ max_steps,
+ demod);
+ no_signal = stv0900_check_signal_presence(intp, demod);
+ trial_cntr++;
+ if ((lock == TRUE)
+ || (no_signal == TRUE)
+ || (trial_cntr == 2)) {
+
+ if (intp->chip_id >= 0x20) {
+ stv0900_write_reg(intp, CARFREQ, 0x49);
+ stv0900_write_reg(intp, CORRELABS, 0x9e);
+ } else {
+ stv0900_write_reg(intp, CARFREQ, 0xed);
+ stv0900_write_reg(intp, CORRELABS, 0x88);
+ }
+
+ if ((stv0900_get_bits(intp, HEADER_MODE) ==
+ STV0900_DVBS2_FOUND) &&
+ (lock == TRUE)) {
+ msleep(sft_stp_tout);
+ s2fw = stv0900_get_bits(intp, FLYWHEEL_CPT);
+
+ if (s2fw < 0xd) {
+ msleep(sft_stp_tout);
+ s2fw = stv0900_get_bits(intp,
+ FLYWHEEL_CPT);
+ }
+
+ if (s2fw < 0xd) {
+ lock = FALSE;
+
+ if (trial_cntr < 2) {
+ if (intp->chip_id >= 0x20)
+ stv0900_write_reg(intp,
+ CORRELABS,
+ 0x79);
+ else
+ stv0900_write_reg(intp,
+ CORRELABS,
+ 0x68);
+
+ stv0900_write_reg(intp,
+ DMDCFGMD,
+ 0x89);
+ }
+ }
+ }
+ }
+
+ } while ((lock == FALSE)
+ && (trial_cntr < 2)
+ && (no_signal == FALSE));
+
return lock;
}
-static u32 stv0900_get_symbol_rate(struct stv0900_internal *i_params,
+static u32 stv0900_get_symbol_rate(struct stv0900_internal *intp,
u32 mclk,
enum fe_stv0900_demod_num demod)
{
- s32 sfr_field3, sfr_field2, sfr_field1, sfr_field0,
- rem1, rem2, intval1, intval2, srate;
+ s32 rem1, rem2, intval1, intval2, srate;
- dmd_reg(sfr_field3, F0900_P1_SYMB_FREQ3, F0900_P2_SYMB_FREQ3);
- dmd_reg(sfr_field2, F0900_P1_SYMB_FREQ2, F0900_P2_SYMB_FREQ2);
- dmd_reg(sfr_field1, F0900_P1_SYMB_FREQ1, F0900_P2_SYMB_FREQ1);
- dmd_reg(sfr_field0, F0900_P1_SYMB_FREQ0, F0900_P2_SYMB_FREQ0);
-
- srate = (stv0900_get_bits(i_params, sfr_field3) << 24) +
- (stv0900_get_bits(i_params, sfr_field2) << 16) +
- (stv0900_get_bits(i_params, sfr_field1) << 8) +
- (stv0900_get_bits(i_params, sfr_field0));
+ srate = (stv0900_get_bits(intp, SYMB_FREQ3) << 24) +
+ (stv0900_get_bits(intp, SYMB_FREQ2) << 16) +
+ (stv0900_get_bits(intp, SYMB_FREQ1) << 8) +
+ (stv0900_get_bits(intp, SYMB_FREQ0));
dprintk("lock: srate=%d r0=0x%x r1=0x%x r2=0x%x r3=0x%x \n",
- srate, stv0900_get_bits(i_params, sfr_field0),
- stv0900_get_bits(i_params, sfr_field1),
- stv0900_get_bits(i_params, sfr_field2),
- stv0900_get_bits(i_params, sfr_field3));
+ srate, stv0900_get_bits(intp, SYMB_FREQ0),
+ stv0900_get_bits(intp, SYMB_FREQ1),
+ stv0900_get_bits(intp, SYMB_FREQ2),
+ stv0900_get_bits(intp, SYMB_FREQ3));
intval1 = (mclk) >> 16;
intval2 = (srate) >> 16;
@@ -520,18 +333,15 @@
return srate;
}
-static void stv0900_set_symbol_rate(struct stv0900_internal *i_params,
+static void stv0900_set_symbol_rate(struct stv0900_internal *intp,
u32 mclk, u32 srate,
enum fe_stv0900_demod_num demod)
{
- s32 sfr_init_reg;
u32 symb;
- dprintk(KERN_INFO "%s: Mclk %d, SR %d, Dmd %d\n", __func__, mclk,
+ dprintk("%s: Mclk %d, SR %d, Dmd %d\n", __func__, mclk,
srate, demod);
- dmd_reg(sfr_init_reg, R0900_P1_SFRINIT1, R0900_P2_SFRINIT1);
-
if (srate > 60000000) {
symb = srate << 4;
symb /= (mclk >> 12);
@@ -543,19 +353,16 @@
symb /= (mclk >> 7);
}
- stv0900_write_reg(i_params, sfr_init_reg, (symb >> 8) & 0x7F);
- stv0900_write_reg(i_params, sfr_init_reg + 1, (symb & 0xFF));
+ stv0900_write_reg(intp, SFRINIT1, (symb >> 8) & 0x7f);
+ stv0900_write_reg(intp, SFRINIT1 + 1, (symb & 0xff));
}
-static void stv0900_set_max_symbol_rate(struct stv0900_internal *i_params,
+static void stv0900_set_max_symbol_rate(struct stv0900_internal *intp,
u32 mclk, u32 srate,
enum fe_stv0900_demod_num demod)
{
- s32 sfr_max_reg;
u32 symb;
- dmd_reg(sfr_max_reg, R0900_P1_SFRUP1, R0900_P2_SFRUP1);
-
srate = 105 * (srate / 100);
if (srate > 60000000) {
@@ -570,23 +377,20 @@
}
if (symb < 0x7fff) {
- stv0900_write_reg(i_params, sfr_max_reg, (symb >> 8) & 0x7F);
- stv0900_write_reg(i_params, sfr_max_reg + 1, (symb & 0xFF));
+ stv0900_write_reg(intp, SFRUP1, (symb >> 8) & 0x7f);
+ stv0900_write_reg(intp, SFRUP1 + 1, (symb & 0xff));
} else {
- stv0900_write_reg(i_params, sfr_max_reg, 0x7F);
- stv0900_write_reg(i_params, sfr_max_reg + 1, 0xFF);
+ stv0900_write_reg(intp, SFRUP1, 0x7f);
+ stv0900_write_reg(intp, SFRUP1 + 1, 0xff);
}
}
-static void stv0900_set_min_symbol_rate(struct stv0900_internal *i_params,
+static void stv0900_set_min_symbol_rate(struct stv0900_internal *intp,
u32 mclk, u32 srate,
enum fe_stv0900_demod_num demod)
{
- s32 sfr_min_reg;
u32 symb;
- dmd_reg(sfr_min_reg, R0900_P1_SFRLOW1, R0900_P2_SFRLOW1);
-
srate = 95 * (srate / 100);
if (srate > 60000000) {
symb = srate << 4;
@@ -601,22 +405,20 @@
symb /= (mclk >> 7);
}
- stv0900_write_reg(i_params, sfr_min_reg, (symb >> 8) & 0xFF);
- stv0900_write_reg(i_params, sfr_min_reg + 1, (symb & 0xFF));
+ stv0900_write_reg(intp, SFRLOW1, (symb >> 8) & 0xff);
+ stv0900_write_reg(intp, SFRLOW1 + 1, (symb & 0xff));
}
-static s32 stv0900_get_timing_offst(struct stv0900_internal *i_params,
+static s32 stv0900_get_timing_offst(struct stv0900_internal *intp,
u32 srate,
enum fe_stv0900_demod_num demod)
{
- s32 tmgreg,
- timingoffset;
+ s32 timingoffset;
- dmd_reg(tmgreg, R0900_P1_TMGREG2, R0900_P2_TMGREG2);
- timingoffset = (stv0900_read_reg(i_params, tmgreg) << 16) +
- (stv0900_read_reg(i_params, tmgreg + 1) << 8) +
- (stv0900_read_reg(i_params, tmgreg + 2));
+ timingoffset = (stv0900_read_reg(intp, TMGREG2) << 16) +
+ (stv0900_read_reg(intp, TMGREG2 + 1) << 8) +
+ (stv0900_read_reg(intp, TMGREG2 + 2));
timingoffset = ge2comp(timingoffset, 24);
@@ -630,22 +432,19 @@
return timingoffset;
}
-static void stv0900_set_dvbs2_rolloff(struct stv0900_internal *i_params,
+static void stv0900_set_dvbs2_rolloff(struct stv0900_internal *intp,
enum fe_stv0900_demod_num demod)
{
- s32 rolloff, man_fld, matstr_reg, rolloff_ctl_fld;
+ s32 rolloff;
- dmd_reg(man_fld, F0900_P1_MANUAL_ROLLOFF, F0900_P2_MANUAL_ROLLOFF);
- dmd_reg(matstr_reg, R0900_P1_MATSTR1, R0900_P2_MATSTR1);
- dmd_reg(rolloff_ctl_fld, F0900_P1_ROLLOFF_CONTROL,
- F0900_P2_ROLLOFF_CONTROL);
-
- if (i_params->chip_id == 0x10) {
- stv0900_write_bits(i_params, man_fld, 1);
- rolloff = stv0900_read_reg(i_params, matstr_reg) & 0x03;
- stv0900_write_bits(i_params, rolloff_ctl_fld, rolloff);
- } else
- stv0900_write_bits(i_params, man_fld, 0);
+ if (intp->chip_id == 0x10) {
+ stv0900_write_bits(intp, MANUALSX_ROLLOFF, 1);
+ rolloff = stv0900_read_reg(intp, MATSTR1) & 0x03;
+ stv0900_write_bits(intp, ROLLOFF_CONTROL, rolloff);
+ } else if (intp->chip_id <= 0x20)
+ stv0900_write_bits(intp, MANUALSX_ROLLOFF, 0);
+ else /* cut 3.0 */
+ stv0900_write_bits(intp, MANUALS2_ROLLOFF, 0);
}
static u32 stv0900_carrier_width(u32 srate, enum fe_stv0900_rolloff ro)
@@ -668,85 +467,48 @@
return srate + (srate * rolloff) / 100;
}
-static int stv0900_check_timing_lock(struct stv0900_internal *i_params,
+static int stv0900_check_timing_lock(struct stv0900_internal *intp,
enum fe_stv0900_demod_num demod)
{
int timingLock = FALSE;
- s32 i,
- timingcpt = 0;
- u8 carFreq,
- tmgTHhigh,
- tmgTHLow;
+ s32 i,
+ timingcpt = 0;
+ u8 car_freq,
+ tmg_th_high,
+ tmg_th_low;
- switch (demod) {
- case STV0900_DEMOD_1:
- default:
- carFreq = stv0900_read_reg(i_params, R0900_P1_CARFREQ);
- tmgTHhigh = stv0900_read_reg(i_params, R0900_P1_TMGTHRISE);
- tmgTHLow = stv0900_read_reg(i_params, R0900_P1_TMGTHFALL);
- stv0900_write_reg(i_params, R0900_P1_TMGTHRISE, 0x20);
- stv0900_write_reg(i_params, R0900_P1_TMGTHFALL, 0x0);
- stv0900_write_bits(i_params, F0900_P1_CFR_AUTOSCAN, 0);
- stv0900_write_reg(i_params, R0900_P1_RTC, 0x80);
- stv0900_write_reg(i_params, R0900_P1_RTCS2, 0x40);
- stv0900_write_reg(i_params, R0900_P1_CARFREQ, 0x0);
- stv0900_write_reg(i_params, R0900_P1_CFRINIT1, 0x0);
- stv0900_write_reg(i_params, R0900_P1_CFRINIT0, 0x0);
- stv0900_write_reg(i_params, R0900_P1_AGC2REF, 0x65);
- stv0900_write_reg(i_params, R0900_P1_DMDISTATE, 0x18);
- msleep(7);
+ car_freq = stv0900_read_reg(intp, CARFREQ);
+ tmg_th_high = stv0900_read_reg(intp, TMGTHRISE);
+ tmg_th_low = stv0900_read_reg(intp, TMGTHFALL);
+ stv0900_write_reg(intp, TMGTHRISE, 0x20);
+ stv0900_write_reg(intp, TMGTHFALL, 0x0);
+ stv0900_write_bits(intp, CFR_AUTOSCAN, 0);
+ stv0900_write_reg(intp, RTC, 0x80);
+ stv0900_write_reg(intp, RTCS2, 0x40);
+ stv0900_write_reg(intp, CARFREQ, 0x0);
+ stv0900_write_reg(intp, CFRINIT1, 0x0);
+ stv0900_write_reg(intp, CFRINIT0, 0x0);
+ stv0900_write_reg(intp, AGC2REF, 0x65);
+ stv0900_write_reg(intp, DMDISTATE, 0x18);
+ msleep(7);
- for (i = 0; i < 10; i++) {
- if (stv0900_get_bits(i_params, F0900_P1_TMGLOCK_QUALITY) >= 2)
- timingcpt++;
+ for (i = 0; i < 10; i++) {
+ if (stv0900_get_bits(intp, TMGLOCK_QUALITY) >= 2)
+ timingcpt++;
- msleep(1);
- }
-
- if (timingcpt >= 3)
- timingLock = TRUE;
-
- stv0900_write_reg(i_params, R0900_P1_AGC2REF, 0x38);
- stv0900_write_reg(i_params, R0900_P1_RTC, 0x88);
- stv0900_write_reg(i_params, R0900_P1_RTCS2, 0x68);
- stv0900_write_reg(i_params, R0900_P1_CARFREQ, carFreq);
- stv0900_write_reg(i_params, R0900_P1_TMGTHRISE, tmgTHhigh);
- stv0900_write_reg(i_params, R0900_P1_TMGTHFALL, tmgTHLow);
- break;
- case STV0900_DEMOD_2:
- carFreq = stv0900_read_reg(i_params, R0900_P2_CARFREQ);
- tmgTHhigh = stv0900_read_reg(i_params, R0900_P2_TMGTHRISE);
- tmgTHLow = stv0900_read_reg(i_params, R0900_P2_TMGTHFALL);
- stv0900_write_reg(i_params, R0900_P2_TMGTHRISE, 0x20);
- stv0900_write_reg(i_params, R0900_P2_TMGTHFALL, 0);
- stv0900_write_bits(i_params, F0900_P2_CFR_AUTOSCAN, 0);
- stv0900_write_reg(i_params, R0900_P2_RTC, 0x80);
- stv0900_write_reg(i_params, R0900_P2_RTCS2, 0x40);
- stv0900_write_reg(i_params, R0900_P2_CARFREQ, 0x0);
- stv0900_write_reg(i_params, R0900_P2_CFRINIT1, 0x0);
- stv0900_write_reg(i_params, R0900_P2_CFRINIT0, 0x0);
- stv0900_write_reg(i_params, R0900_P2_AGC2REF, 0x65);
- stv0900_write_reg(i_params, R0900_P2_DMDISTATE, 0x18);
- msleep(5);
- for (i = 0; i < 10; i++) {
- if (stv0900_get_bits(i_params, F0900_P2_TMGLOCK_QUALITY) >= 2)
- timingcpt++;
-
- msleep(1);
- }
-
- if (timingcpt >= 3)
- timingLock = TRUE;
-
- stv0900_write_reg(i_params, R0900_P2_AGC2REF, 0x38);
- stv0900_write_reg(i_params, R0900_P2_RTC, 0x88);
- stv0900_write_reg(i_params, R0900_P2_RTCS2, 0x68);
- stv0900_write_reg(i_params, R0900_P2_CARFREQ, carFreq);
- stv0900_write_reg(i_params, R0900_P2_TMGTHRISE, tmgTHhigh);
- stv0900_write_reg(i_params, R0900_P2_TMGTHFALL, tmgTHLow);
- break;
+ msleep(1);
}
+ if (timingcpt >= 3)
+ timingLock = TRUE;
+
+ stv0900_write_reg(intp, AGC2REF, 0x38);
+ stv0900_write_reg(intp, RTC, 0x88);
+ stv0900_write_reg(intp, RTCS2, 0x68);
+ stv0900_write_reg(intp, CARFREQ, car_freq);
+ stv0900_write_reg(intp, TMGTHRISE, tmg_th_high);
+ stv0900_write_reg(intp, TMGTHFALL, tmg_th_low);
+
return timingLock;
}
@@ -754,142 +516,114 @@
s32 demod_timeout)
{
struct stv0900_state *state = fe->demodulator_priv;
- struct stv0900_internal *i_params = state->internal;
+ struct stv0900_internal *intp = state->internal;
enum fe_stv0900_demod_num demod = state->demod;
+ int lock = FALSE,
+ d = demod;
+ s32 srate,
+ search_range,
+ locktimeout,
+ currier_step,
+ nb_steps,
+ current_step,
+ direction,
+ tuner_freq,
+ timeout,
+ freq;
- int lock = FALSE;
- s32 srate, search_range, locktimeout,
- currier_step, nb_steps, current_step,
- direction, tuner_freq, timeout;
-
- switch (demod) {
- case STV0900_DEMOD_1:
- default:
- srate = i_params->dmd1_symbol_rate;
- search_range = i_params->dmd1_srch_range;
- break;
-
- case STV0900_DEMOD_2:
- srate = i_params->dmd2_symbol_rate;
- search_range = i_params->dmd2_srch_range;
- break;
- }
+ srate = intp->symbol_rate[d];
+ search_range = intp->srch_range[d];
if (srate >= 10000000)
locktimeout = demod_timeout / 3;
else
locktimeout = demod_timeout / 2;
- lock = stv0900_get_demod_lock(i_params, demod, locktimeout);
+ lock = stv0900_get_demod_lock(intp, d, locktimeout);
- if (lock == FALSE) {
- if (srate >= 10000000) {
- if (stv0900_check_timing_lock(i_params, demod) == TRUE) {
- switch (demod) {
- case STV0900_DEMOD_1:
- default:
- stv0900_write_reg(i_params, R0900_P1_DMDISTATE, 0x1f);
- stv0900_write_reg(i_params, R0900_P1_DMDISTATE, 0x15);
- break;
- case STV0900_DEMOD_2:
- stv0900_write_reg(i_params, R0900_P2_DMDISTATE, 0x1f);
- stv0900_write_reg(i_params, R0900_P2_DMDISTATE, 0x15);
- break;
- }
+ if (lock != FALSE)
+ return lock;
- lock = stv0900_get_demod_lock(i_params, demod, demod_timeout);
- } else
- lock = FALSE;
- } else {
- if (srate <= 4000000)
- currier_step = 1000;
- else if (srate <= 7000000)
- currier_step = 2000;
- else if (srate <= 10000000)
- currier_step = 3000;
- else
- currier_step = 5000;
+ if (srate >= 10000000) {
+ if (stv0900_check_timing_lock(intp, d) == TRUE) {
+ stv0900_write_reg(intp, DMDISTATE, 0x1f);
+ stv0900_write_reg(intp, DMDISTATE, 0x15);
+ lock = stv0900_get_demod_lock(intp, d, demod_timeout);
+ } else
+ lock = FALSE;
- nb_steps = ((search_range / 1000) / currier_step);
- nb_steps /= 2;
- nb_steps = (2 * (nb_steps + 1));
- if (nb_steps < 0)
- nb_steps = 2;
- else if (nb_steps > 12)
- nb_steps = 12;
+ return lock;
+ }
- current_step = 1;
- direction = 1;
+ if (intp->chip_id <= 0x20) {
+ if (srate <= 1000000)
+ currier_step = 500;
+ else if (srate <= 4000000)
+ currier_step = 1000;
+ else if (srate <= 7000000)
+ currier_step = 2000;
+ else if (srate <= 10000000)
+ currier_step = 3000;
+ else
+ currier_step = 5000;
+
+ if (srate >= 2000000) {
timeout = (demod_timeout / 3);
if (timeout > 1000)
timeout = 1000;
+ } else
+ timeout = (demod_timeout / 2);
+ } else {
+ /*cut 3.0 */
+ currier_step = srate / 4000;
+ timeout = (demod_timeout * 3) / 4;
+ }
- switch (demod) {
- case STV0900_DEMOD_1:
- default:
- if (lock == FALSE) {
- tuner_freq = i_params->tuner1_freq;
- i_params->tuner1_bw = stv0900_carrier_width(i_params->dmd1_symbol_rate, i_params->rolloff) + i_params->dmd1_symbol_rate;
+ nb_steps = ((search_range / 1000) / currier_step);
- while ((current_step <= nb_steps) && (lock == FALSE)) {
+ if ((nb_steps % 2) != 0)
+ nb_steps += 1;
- if (direction > 0)
- tuner_freq += (current_step * currier_step);
- else
- tuner_freq -= (current_step * currier_step);
+ if (nb_steps <= 0)
+ nb_steps = 2;
+ else if (nb_steps > 12)
+ nb_steps = 12;
- stv0900_set_tuner(fe, tuner_freq, i_params->tuner1_bw);
- stv0900_write_reg(i_params, R0900_P1_DMDISTATE, 0x1C);
- if (i_params->dmd1_srch_standard == STV0900_SEARCH_DVBS2) {
- stv0900_write_bits(i_params, F0900_P1_DVBS1_ENABLE, 0);
- stv0900_write_bits(i_params, F0900_P1_DVBS2_ENABLE, 0);
- stv0900_write_bits(i_params, F0900_P1_DVBS1_ENABLE, 1);
- stv0900_write_bits(i_params, F0900_P1_DVBS2_ENABLE, 1);
- }
+ current_step = 1;
+ direction = 1;
- stv0900_write_reg(i_params, R0900_P1_CFRINIT1, 0);
- stv0900_write_reg(i_params, R0900_P1_CFRINIT0, 0);
- stv0900_write_reg(i_params, R0900_P1_DMDISTATE, 0x1F);
- stv0900_write_reg(i_params, R0900_P1_DMDISTATE, 0x15);
- lock = stv0900_get_demod_lock(i_params, demod, timeout);
- direction *= -1;
- current_step++;
- }
- }
- break;
- case STV0900_DEMOD_2:
- if (lock == FALSE) {
- tuner_freq = i_params->tuner2_freq;
- i_params->tuner2_bw = stv0900_carrier_width(srate, i_params->rolloff) + srate;
+ if (intp->chip_id <= 0x20) {
+ tuner_freq = intp->freq[d];
+ intp->bw[d] = stv0900_carrier_width(intp->symbol_rate[d],
+ intp->rolloff) + intp->symbol_rate[d];
+ } else
+ tuner_freq = 0;
- while ((current_step <= nb_steps) && (lock == FALSE)) {
+ while ((current_step <= nb_steps) && (lock == FALSE)) {
+ if (direction > 0)
+ tuner_freq += (current_step * currier_step);
+ else
+ tuner_freq -= (current_step * currier_step);
- if (direction > 0)
- tuner_freq += (current_step * currier_step);
- else
- tuner_freq -= (current_step * currier_step);
-
- stv0900_set_tuner(fe, tuner_freq, i_params->tuner2_bw);
- stv0900_write_reg(i_params, R0900_P2_DMDISTATE, 0x1C);
- if (i_params->dmd2_srch_stndrd == STV0900_SEARCH_DVBS2) {
- stv0900_write_bits(i_params, F0900_P2_DVBS1_ENABLE, 0);
- stv0900_write_bits(i_params, F0900_P2_DVBS2_ENABLE, 0);
- stv0900_write_bits(i_params, F0900_P2_DVBS1_ENABLE, 1);
- stv0900_write_bits(i_params, F0900_P2_DVBS2_ENABLE, 1);
- }
-
- stv0900_write_reg(i_params, R0900_P2_CFRINIT1, 0);
- stv0900_write_reg(i_params, R0900_P2_CFRINIT0, 0);
- stv0900_write_reg(i_params, R0900_P2_DMDISTATE, 0x1F);
- stv0900_write_reg(i_params, R0900_P2_DMDISTATE, 0x15);
- lock = stv0900_get_demod_lock(i_params, demod, timeout);
- direction *= -1;
- current_step++;
- }
- }
- break;
- }
+ if (intp->chip_id <= 0x20) {
+ stv0900_set_tuner(fe, tuner_freq, intp->bw[d]);
+ stv0900_write_reg(intp, DMDISTATE, 0x1c);
+ stv0900_write_reg(intp, CFRINIT1, 0);
+ stv0900_write_reg(intp, CFRINIT0, 0);
+ stv0900_write_reg(intp, DMDISTATE, 0x1f);
+ stv0900_write_reg(intp, DMDISTATE, 0x15);
+ } else {
+ stv0900_write_reg(intp, DMDISTATE, 0x1c);
+ freq = (tuner_freq * 65536) / (intp->mclk / 1000);
+ stv0900_write_bits(intp, CFR_INIT1, MSB(freq));
+ stv0900_write_bits(intp, CFR_INIT0, LSB(freq));
+ stv0900_write_reg(intp, DMDISTATE, 0x1f);
+ stv0900_write_reg(intp, DMDISTATE, 0x05);
}
+
+ lock = stv0900_get_demod_lock(intp, d, timeout);
+ direction *= -1;
+ current_step++;
}
return lock;
@@ -931,9 +665,7 @@
} else if (srate <= 20000000) {
(*demod_timeout) = 400;
(*fec_timeout) = 130;
- }
-
- else {
+ } else {
(*demod_timeout) = 300;
(*fec_timeout) = 100;
}
@@ -946,95 +678,77 @@
(*demod_timeout) /= 2;
}
-static void stv0900_set_viterbi_tracq(struct stv0900_internal *i_params,
+static void stv0900_set_viterbi_tracq(struct stv0900_internal *intp,
enum fe_stv0900_demod_num demod)
{
- s32 vth_reg;
+ s32 vth_reg = VTH12;
- dprintk(KERN_INFO "%s\n", __func__);
+ dprintk("%s\n", __func__);
- dmd_reg(vth_reg, R0900_P1_VTH12, R0900_P2_VTH12);
-
- stv0900_write_reg(i_params, vth_reg++, 0xd0);
- stv0900_write_reg(i_params, vth_reg++, 0x7d);
- stv0900_write_reg(i_params, vth_reg++, 0x53);
- stv0900_write_reg(i_params, vth_reg++, 0x2F);
- stv0900_write_reg(i_params, vth_reg++, 0x24);
- stv0900_write_reg(i_params, vth_reg++, 0x1F);
+ stv0900_write_reg(intp, vth_reg++, 0xd0);
+ stv0900_write_reg(intp, vth_reg++, 0x7d);
+ stv0900_write_reg(intp, vth_reg++, 0x53);
+ stv0900_write_reg(intp, vth_reg++, 0x2f);
+ stv0900_write_reg(intp, vth_reg++, 0x24);
+ stv0900_write_reg(intp, vth_reg++, 0x1f);
}
-static void stv0900_set_viterbi_standard(struct stv0900_internal *i_params,
- enum fe_stv0900_search_standard Standard,
- enum fe_stv0900_fec PunctureRate,
+static void stv0900_set_viterbi_standard(struct stv0900_internal *intp,
+ enum fe_stv0900_search_standard standard,
+ enum fe_stv0900_fec fec,
enum fe_stv0900_demod_num demod)
{
+ dprintk("%s: ViterbiStandard = ", __func__);
- s32 fecmReg,
- prvitReg;
-
- dprintk(KERN_INFO "%s: ViterbiStandard = ", __func__);
-
- switch (demod) {
- case STV0900_DEMOD_1:
- default:
- fecmReg = R0900_P1_FECM;
- prvitReg = R0900_P1_PRVIT;
- break;
- case STV0900_DEMOD_2:
- fecmReg = R0900_P2_FECM;
- prvitReg = R0900_P2_PRVIT;
- break;
- }
-
- switch (Standard) {
+ switch (standard) {
case STV0900_AUTO_SEARCH:
dprintk("Auto\n");
- stv0900_write_reg(i_params, fecmReg, 0x10);
- stv0900_write_reg(i_params, prvitReg, 0x3F);
+ stv0900_write_reg(intp, FECM, 0x10);
+ stv0900_write_reg(intp, PRVIT, 0x3f);
break;
case STV0900_SEARCH_DVBS1:
dprintk("DVBS1\n");
- stv0900_write_reg(i_params, fecmReg, 0x00);
- switch (PunctureRate) {
+ stv0900_write_reg(intp, FECM, 0x00);
+ switch (fec) {
case STV0900_FEC_UNKNOWN:
default:
- stv0900_write_reg(i_params, prvitReg, 0x2F);
+ stv0900_write_reg(intp, PRVIT, 0x2f);
break;
case STV0900_FEC_1_2:
- stv0900_write_reg(i_params, prvitReg, 0x01);
+ stv0900_write_reg(intp, PRVIT, 0x01);
break;
case STV0900_FEC_2_3:
- stv0900_write_reg(i_params, prvitReg, 0x02);
+ stv0900_write_reg(intp, PRVIT, 0x02);
break;
case STV0900_FEC_3_4:
- stv0900_write_reg(i_params, prvitReg, 0x04);
+ stv0900_write_reg(intp, PRVIT, 0x04);
break;
case STV0900_FEC_5_6:
- stv0900_write_reg(i_params, prvitReg, 0x08);
+ stv0900_write_reg(intp, PRVIT, 0x08);
break;
case STV0900_FEC_7_8:
- stv0900_write_reg(i_params, prvitReg, 0x20);
+ stv0900_write_reg(intp, PRVIT, 0x20);
break;
}
break;
case STV0900_SEARCH_DSS:
dprintk("DSS\n");
- stv0900_write_reg(i_params, fecmReg, 0x80);
- switch (PunctureRate) {
+ stv0900_write_reg(intp, FECM, 0x80);
+ switch (fec) {
case STV0900_FEC_UNKNOWN:
default:
- stv0900_write_reg(i_params, prvitReg, 0x13);
+ stv0900_write_reg(intp, PRVIT, 0x13);
break;
case STV0900_FEC_1_2:
- stv0900_write_reg(i_params, prvitReg, 0x01);
+ stv0900_write_reg(intp, PRVIT, 0x01);
break;
case STV0900_FEC_2_3:
- stv0900_write_reg(i_params, prvitReg, 0x02);
+ stv0900_write_reg(intp, PRVIT, 0x02);
break;
case STV0900_FEC_6_7:
- stv0900_write_reg(i_params, prvitReg, 0x10);
+ stv0900_write_reg(intp, PRVIT, 0x10);
break;
}
break;
@@ -1043,495 +757,11 @@
}
}
-static void stv0900_track_optimization(struct dvb_frontend *fe)
-{
- struct stv0900_state *state = fe->demodulator_priv;
- struct stv0900_internal *i_params = state->internal;
- enum fe_stv0900_demod_num demod = state->demod;
-
- s32 srate, pilots, aclc, freq1, freq0,
- i = 0, timed, timef, blindTunSw = 0;
-
- enum fe_stv0900_rolloff rolloff;
- enum fe_stv0900_modcode foundModcod;
-
- dprintk(KERN_INFO "%s\n", __func__);
-
- srate = stv0900_get_symbol_rate(i_params, i_params->mclk, demod);
- srate += stv0900_get_timing_offst(i_params, srate, demod);
-
- switch (demod) {
- case STV0900_DEMOD_1:
- default:
- switch (i_params->dmd1_rslts.standard) {
- case STV0900_DVBS1_STANDARD:
- if (i_params->dmd1_srch_standard == STV0900_AUTO_SEARCH) {
- stv0900_write_bits(i_params, F0900_P1_DVBS1_ENABLE, 1);
- stv0900_write_bits(i_params, F0900_P1_DVBS2_ENABLE, 0);
- }
-
- stv0900_write_bits(i_params, F0900_P1_ROLLOFF_CONTROL, i_params->rolloff);
- stv0900_write_bits(i_params, F0900_P1_MANUAL_ROLLOFF, 1);
- stv0900_write_reg(i_params, R0900_P1_ERRCTRL1, 0x75);
- break;
- case STV0900_DSS_STANDARD:
- if (i_params->dmd1_srch_standard == STV0900_AUTO_SEARCH) {
- stv0900_write_bits(i_params, F0900_P1_DVBS1_ENABLE, 1);
- stv0900_write_bits(i_params, F0900_P1_DVBS2_ENABLE, 0);
- }
-
- stv0900_write_bits(i_params, F0900_P1_ROLLOFF_CONTROL, i_params->rolloff);
- stv0900_write_bits(i_params, F0900_P1_MANUAL_ROLLOFF, 1);
- stv0900_write_reg(i_params, R0900_P1_ERRCTRL1, 0x75);
- break;
- case STV0900_DVBS2_STANDARD:
- stv0900_write_bits(i_params, F0900_P1_DVBS1_ENABLE, 0);
- stv0900_write_bits(i_params, F0900_P1_DVBS2_ENABLE, 1);
- stv0900_write_reg(i_params, R0900_P1_ACLC, 0);
- stv0900_write_reg(i_params, R0900_P1_BCLC, 0);
- if (i_params->dmd1_rslts.frame_length == STV0900_LONG_FRAME) {
- foundModcod = stv0900_get_bits(i_params, F0900_P1_DEMOD_MODCOD);
- pilots = stv0900_get_bits(i_params, F0900_P1_DEMOD_TYPE) & 0x01;
- aclc = stv0900_get_optim_carr_loop(srate, foundModcod, pilots, i_params->chip_id);
- if (foundModcod <= STV0900_QPSK_910)
- stv0900_write_reg(i_params, R0900_P1_ACLC2S2Q, aclc);
- else if (foundModcod <= STV0900_8PSK_910) {
- stv0900_write_reg(i_params, R0900_P1_ACLC2S2Q, 0x2a);
- stv0900_write_reg(i_params, R0900_P1_ACLC2S28, aclc);
- }
-
- if ((i_params->demod_mode == STV0900_SINGLE) && (foundModcod > STV0900_8PSK_910)) {
- if (foundModcod <= STV0900_16APSK_910) {
- stv0900_write_reg(i_params, R0900_P1_ACLC2S2Q, 0x2a);
- stv0900_write_reg(i_params, R0900_P1_ACLC2S216A, aclc);
- } else if (foundModcod <= STV0900_32APSK_910) {
- stv0900_write_reg(i_params, R0900_P1_ACLC2S2Q, 0x2a);
- stv0900_write_reg(i_params, R0900_P1_ACLC2S232A, aclc);
- }
- }
-
- } else {
- aclc = stv0900_get_optim_short_carr_loop(srate, i_params->dmd1_rslts.modulation, i_params->chip_id);
- if (i_params->dmd1_rslts.modulation == STV0900_QPSK)
- stv0900_write_reg(i_params, R0900_P1_ACLC2S2Q, aclc);
-
- else if (i_params->dmd1_rslts.modulation == STV0900_8PSK) {
- stv0900_write_reg(i_params, R0900_P1_ACLC2S2Q, 0x2a);
- stv0900_write_reg(i_params, R0900_P1_ACLC2S28, aclc);
- } else if (i_params->dmd1_rslts.modulation == STV0900_16APSK) {
- stv0900_write_reg(i_params, R0900_P1_ACLC2S2Q, 0x2a);
- stv0900_write_reg(i_params, R0900_P1_ACLC2S216A, aclc);
- } else if (i_params->dmd1_rslts.modulation == STV0900_32APSK) {
- stv0900_write_reg(i_params, R0900_P1_ACLC2S2Q, 0x2a);
- stv0900_write_reg(i_params, R0900_P1_ACLC2S232A, aclc);
- }
-
- }
-
- if (i_params->chip_id <= 0x11) {
- if (i_params->demod_mode != STV0900_SINGLE)
- stv0900_activate_s2_modcode(i_params, demod);
-
- }
-
- stv0900_write_reg(i_params, R0900_P1_ERRCTRL1, 0x67);
- break;
- case STV0900_UNKNOWN_STANDARD:
- default:
- stv0900_write_bits(i_params, F0900_P1_DVBS1_ENABLE, 1);
- stv0900_write_bits(i_params, F0900_P1_DVBS2_ENABLE, 1);
- break;
- }
-
- freq1 = stv0900_read_reg(i_params, R0900_P1_CFR2);
- freq0 = stv0900_read_reg(i_params, R0900_P1_CFR1);
- rolloff = stv0900_get_bits(i_params, F0900_P1_ROLLOFF_STATUS);
- if (i_params->dmd1_srch_algo == STV0900_BLIND_SEARCH) {
- stv0900_write_reg(i_params, R0900_P1_SFRSTEP, 0x00);
- stv0900_write_bits(i_params, F0900_P1_SCAN_ENABLE, 0);
- stv0900_write_bits(i_params, F0900_P1_CFR_AUTOSCAN, 0);
- stv0900_write_reg(i_params, R0900_P1_TMGCFG2, 0x01);
- stv0900_set_symbol_rate(i_params, i_params->mclk, srate, demod);
- stv0900_set_max_symbol_rate(i_params, i_params->mclk, srate, demod);
- stv0900_set_min_symbol_rate(i_params, i_params->mclk, srate, demod);
- blindTunSw = 1;
- }
-
- if (i_params->chip_id >= 0x20) {
- if ((i_params->dmd1_srch_standard == STV0900_SEARCH_DVBS1) || (i_params->dmd1_srch_standard == STV0900_SEARCH_DSS) || (i_params->dmd1_srch_standard == STV0900_AUTO_SEARCH)) {
- stv0900_write_reg(i_params, R0900_P1_VAVSRVIT, 0x0a);
- stv0900_write_reg(i_params, R0900_P1_VITSCALE, 0x0);
- }
- }
-
- if (i_params->chip_id < 0x20)
- stv0900_write_reg(i_params, R0900_P1_CARHDR, 0x08);
-
- if (i_params->chip_id == 0x10)
- stv0900_write_reg(i_params, R0900_P1_CORRELEXP, 0x0A);
-
- stv0900_write_reg(i_params, R0900_P1_AGC2REF, 0x38);
-
- if ((i_params->chip_id >= 0x20) || (blindTunSw == 1) || (i_params->dmd1_symbol_rate < 10000000)) {
- stv0900_write_reg(i_params, R0900_P1_CFRINIT1, freq1);
- stv0900_write_reg(i_params, R0900_P1_CFRINIT0, freq0);
- i_params->tuner1_bw = stv0900_carrier_width(srate, i_params->rolloff) + 10000000;
-
- if ((i_params->chip_id >= 0x20) || (blindTunSw == 1)) {
- if (i_params->dmd1_srch_algo != STV0900_WARM_START)
- stv0900_set_bandwidth(fe, i_params->tuner1_bw);
- }
-
- if ((i_params->dmd1_srch_algo == STV0900_BLIND_SEARCH) || (i_params->dmd1_symbol_rate < 10000000))
- msleep(50);
- else
- msleep(5);
-
- stv0900_get_lock_timeout(&timed, &timef, srate, STV0900_WARM_START);
-
- if (stv0900_get_demod_lock(i_params, demod, timed / 2) == FALSE) {
- stv0900_write_reg(i_params, R0900_P1_DMDISTATE, 0x1F);
- stv0900_write_reg(i_params, R0900_P1_CFRINIT1, freq1);
- stv0900_write_reg(i_params, R0900_P1_CFRINIT0, freq0);
- stv0900_write_reg(i_params, R0900_P1_DMDISTATE, 0x18);
- i = 0;
- while ((stv0900_get_demod_lock(i_params, demod, timed / 2) == FALSE) && (i <= 2)) {
- stv0900_write_reg(i_params, R0900_P1_DMDISTATE, 0x1F);
- stv0900_write_reg(i_params, R0900_P1_CFRINIT1, freq1);
- stv0900_write_reg(i_params, R0900_P1_CFRINIT0, freq0);
- stv0900_write_reg(i_params, R0900_P1_DMDISTATE, 0x18);
- i++;
- }
- }
-
- }
-
- if (i_params->chip_id >= 0x20)
- stv0900_write_reg(i_params, R0900_P1_CARFREQ, 0x49);
-
- if ((i_params->dmd1_rslts.standard == STV0900_DVBS1_STANDARD) || (i_params->dmd1_rslts.standard == STV0900_DSS_STANDARD))
- stv0900_set_viterbi_tracq(i_params, demod);
-
- break;
-
- case STV0900_DEMOD_2:
- switch (i_params->dmd2_rslts.standard) {
- case STV0900_DVBS1_STANDARD:
-
- if (i_params->dmd2_srch_stndrd == STV0900_AUTO_SEARCH) {
- stv0900_write_bits(i_params, F0900_P2_DVBS1_ENABLE, 1);
- stv0900_write_bits(i_params, F0900_P2_DVBS2_ENABLE, 0);
- }
-
- stv0900_write_bits(i_params, F0900_P2_ROLLOFF_CONTROL, i_params->rolloff);
- stv0900_write_bits(i_params, F0900_P2_MANUAL_ROLLOFF, 1);
- stv0900_write_reg(i_params, R0900_P2_ERRCTRL1, 0x75);
- break;
- case STV0900_DSS_STANDARD:
- if (i_params->dmd2_srch_stndrd == STV0900_AUTO_SEARCH) {
- stv0900_write_bits(i_params, F0900_P2_DVBS1_ENABLE, 1);
- stv0900_write_bits(i_params, F0900_P2_DVBS2_ENABLE, 0);
- }
-
- stv0900_write_bits(i_params, F0900_P2_ROLLOFF_CONTROL, i_params->rolloff);
- stv0900_write_bits(i_params, F0900_P2_MANUAL_ROLLOFF, 1);
- stv0900_write_reg(i_params, R0900_P2_ERRCTRL1, 0x75);
- break;
- case STV0900_DVBS2_STANDARD:
- stv0900_write_bits(i_params, F0900_P2_DVBS1_ENABLE, 0);
- stv0900_write_bits(i_params, F0900_P2_DVBS2_ENABLE, 1);
- stv0900_write_reg(i_params, R0900_P2_ACLC, 0);
- stv0900_write_reg(i_params, R0900_P2_BCLC, 0);
- if (i_params->dmd2_rslts.frame_length == STV0900_LONG_FRAME) {
- foundModcod = stv0900_get_bits(i_params, F0900_P2_DEMOD_MODCOD);
- pilots = stv0900_get_bits(i_params, F0900_P2_DEMOD_TYPE) & 0x01;
- aclc = stv0900_get_optim_carr_loop(srate, foundModcod, pilots, i_params->chip_id);
- if (foundModcod <= STV0900_QPSK_910)
- stv0900_write_reg(i_params, R0900_P2_ACLC2S2Q, aclc);
- else if (foundModcod <= STV0900_8PSK_910) {
- stv0900_write_reg(i_params, R0900_P2_ACLC2S2Q, 0x2a);
- stv0900_write_reg(i_params, R0900_P2_ACLC2S28, aclc);
- }
-
- if ((i_params->demod_mode == STV0900_SINGLE) && (foundModcod > STV0900_8PSK_910)) {
- if (foundModcod <= STV0900_16APSK_910) {
- stv0900_write_reg(i_params, R0900_P2_ACLC2S2Q, 0x2a);
- stv0900_write_reg(i_params, R0900_P2_ACLC2S216A, aclc);
- } else if (foundModcod <= STV0900_32APSK_910) {
- stv0900_write_reg(i_params, R0900_P2_ACLC2S2Q, 0x2a);
- stv0900_write_reg(i_params, R0900_P2_ACLC2S232A, aclc);
- }
-
- }
-
- } else {
- aclc = stv0900_get_optim_short_carr_loop(srate,
- i_params->dmd2_rslts.modulation,
- i_params->chip_id);
-
- if (i_params->dmd2_rslts.modulation == STV0900_QPSK)
- stv0900_write_reg(i_params, R0900_P2_ACLC2S2Q, aclc);
-
- else if (i_params->dmd2_rslts.modulation == STV0900_8PSK) {
- stv0900_write_reg(i_params, R0900_P2_ACLC2S2Q, 0x2a);
- stv0900_write_reg(i_params, R0900_P2_ACLC2S28, aclc);
- } else if (i_params->dmd2_rslts.modulation == STV0900_16APSK) {
- stv0900_write_reg(i_params, R0900_P2_ACLC2S2Q, 0x2a);
- stv0900_write_reg(i_params, R0900_P2_ACLC2S216A, aclc);
- } else if (i_params->dmd2_rslts.modulation == STV0900_32APSK) {
- stv0900_write_reg(i_params, R0900_P2_ACLC2S2Q, 0x2a);
- stv0900_write_reg(i_params, R0900_P2_ACLC2S232A, aclc);
- }
- }
-
- stv0900_write_reg(i_params, R0900_P2_ERRCTRL1, 0x67);
-
- break;
- case STV0900_UNKNOWN_STANDARD:
- default:
- stv0900_write_bits(i_params, F0900_P2_DVBS1_ENABLE, 1);
- stv0900_write_bits(i_params, F0900_P2_DVBS2_ENABLE, 1);
- break;
- }
-
- freq1 = stv0900_read_reg(i_params, R0900_P2_CFR2);
- freq0 = stv0900_read_reg(i_params, R0900_P2_CFR1);
- rolloff = stv0900_get_bits(i_params, F0900_P2_ROLLOFF_STATUS);
- if (i_params->dmd2_srch_algo == STV0900_BLIND_SEARCH) {
- stv0900_write_reg(i_params, R0900_P2_SFRSTEP, 0x00);
- stv0900_write_bits(i_params, F0900_P2_SCAN_ENABLE, 0);
- stv0900_write_bits(i_params, F0900_P2_CFR_AUTOSCAN, 0);
- stv0900_write_reg(i_params, R0900_P2_TMGCFG2, 0x01);
- stv0900_set_symbol_rate(i_params, i_params->mclk, srate, demod);
- stv0900_set_max_symbol_rate(i_params, i_params->mclk, srate, demod);
- stv0900_set_min_symbol_rate(i_params, i_params->mclk, srate, demod);
- blindTunSw = 1;
- }
-
- if (i_params->chip_id >= 0x20) {
- if ((i_params->dmd2_srch_stndrd == STV0900_SEARCH_DVBS1) || (i_params->dmd2_srch_stndrd == STV0900_SEARCH_DSS) || (i_params->dmd2_srch_stndrd == STV0900_AUTO_SEARCH)) {
- stv0900_write_reg(i_params, R0900_P2_VAVSRVIT, 0x0a);
- stv0900_write_reg(i_params, R0900_P2_VITSCALE, 0x0);
- }
- }
-
- if (i_params->chip_id < 0x20)
- stv0900_write_reg(i_params, R0900_P2_CARHDR, 0x08);
-
- if (i_params->chip_id == 0x10)
- stv0900_write_reg(i_params, R0900_P2_CORRELEXP, 0x0a);
-
- stv0900_write_reg(i_params, R0900_P2_AGC2REF, 0x38);
- if ((i_params->chip_id >= 0x20) || (blindTunSw == 1) || (i_params->dmd2_symbol_rate < 10000000)) {
- stv0900_write_reg(i_params, R0900_P2_CFRINIT1, freq1);
- stv0900_write_reg(i_params, R0900_P2_CFRINIT0, freq0);
- i_params->tuner2_bw = stv0900_carrier_width(srate, i_params->rolloff) + 10000000;
-
- if ((i_params->chip_id >= 0x20) || (blindTunSw == 1)) {
- if (i_params->dmd2_srch_algo != STV0900_WARM_START)
- stv0900_set_bandwidth(fe, i_params->tuner2_bw);
- }
-
- if ((i_params->dmd2_srch_algo == STV0900_BLIND_SEARCH) || (i_params->dmd2_symbol_rate < 10000000))
- msleep(50);
- else
- msleep(5);
-
- stv0900_get_lock_timeout(&timed, &timef, srate, STV0900_WARM_START);
- if (stv0900_get_demod_lock(i_params, demod, timed / 2) == FALSE) {
- stv0900_write_reg(i_params, R0900_P2_DMDISTATE, 0x1F);
- stv0900_write_reg(i_params, R0900_P2_CFRINIT1, freq1);
- stv0900_write_reg(i_params, R0900_P2_CFRINIT0, freq0);
- stv0900_write_reg(i_params, R0900_P2_DMDISTATE, 0x18);
- i = 0;
- while ((stv0900_get_demod_lock(i_params, demod, timed / 2) == FALSE) && (i <= 2)) {
- stv0900_write_reg(i_params, R0900_P2_DMDISTATE, 0x1F);
- stv0900_write_reg(i_params, R0900_P2_CFRINIT1, freq1);
- stv0900_write_reg(i_params, R0900_P2_CFRINIT0, freq0);
- stv0900_write_reg(i_params, R0900_P2_DMDISTATE, 0x18);
- i++;
- }
- }
- }
-
- if (i_params->chip_id >= 0x20)
- stv0900_write_reg(i_params, R0900_P2_CARFREQ, 0x49);
-
- if ((i_params->dmd2_rslts.standard == STV0900_DVBS1_STANDARD) || (i_params->dmd2_rslts.standard == STV0900_DSS_STANDARD))
- stv0900_set_viterbi_tracq(i_params, demod);
-
- break;
- }
-}
-
-static int stv0900_get_fec_lock(struct stv0900_internal *i_params, enum fe_stv0900_demod_num demod, s32 time_out)
-{
- s32 timer = 0, lock = 0, header_field, pktdelin_field, lock_vit_field;
-
- enum fe_stv0900_search_state dmd_state;
-
- dprintk(KERN_INFO "%s\n", __func__);
-
- dmd_reg(header_field, F0900_P1_HEADER_MODE, F0900_P2_HEADER_MODE);
- dmd_reg(pktdelin_field, F0900_P1_PKTDELIN_LOCK, F0900_P2_PKTDELIN_LOCK);
- dmd_reg(lock_vit_field, F0900_P1_LOCKEDVIT, F0900_P2_LOCKEDVIT);
-
- dmd_state = stv0900_get_bits(i_params, header_field);
-
- while ((timer < time_out) && (lock == 0)) {
- switch (dmd_state) {
- case STV0900_SEARCH:
- case STV0900_PLH_DETECTED:
- default:
- lock = 0;
- break;
- case STV0900_DVBS2_FOUND:
- lock = stv0900_get_bits(i_params, pktdelin_field);
- break;
- case STV0900_DVBS_FOUND:
- lock = stv0900_get_bits(i_params, lock_vit_field);
- break;
- }
-
- if (lock == 0) {
- msleep(10);
- timer += 10;
- }
- }
-
- if (lock)
- dprintk("DEMOD FEC LOCK OK\n");
- else
- dprintk("DEMOD FEC LOCK FAIL\n");
-
- return lock;
-}
-
-static int stv0900_wait_for_lock(struct stv0900_internal *i_params,
- enum fe_stv0900_demod_num demod,
- s32 dmd_timeout, s32 fec_timeout)
-{
-
- s32 timer = 0, lock = 0, str_merg_rst_fld, str_merg_lock_fld;
-
- dprintk(KERN_INFO "%s\n", __func__);
-
- dmd_reg(str_merg_rst_fld, F0900_P1_RST_HWARE, F0900_P2_RST_HWARE);
- dmd_reg(str_merg_lock_fld, F0900_P1_TSFIFO_LINEOK, F0900_P2_TSFIFO_LINEOK);
-
- lock = stv0900_get_demod_lock(i_params, demod, dmd_timeout);
-
- if (lock)
- lock = lock && stv0900_get_fec_lock(i_params, demod, fec_timeout);
-
- if (lock) {
- lock = 0;
-
- dprintk(KERN_INFO "%s: Timer = %d, time_out = %d\n", __func__, timer, fec_timeout);
-
- while ((timer < fec_timeout) && (lock == 0)) {
- lock = stv0900_get_bits(i_params, str_merg_lock_fld);
- msleep(1);
- timer++;
- }
- }
-
- if (lock)
- dprintk(KERN_INFO "%s: DEMOD LOCK OK\n", __func__);
- else
- dprintk(KERN_INFO "%s: DEMOD LOCK FAIL\n", __func__);
-
- if (lock)
- return TRUE;
- else
- return FALSE;
-}
-
-enum fe_stv0900_tracking_standard stv0900_get_standard(struct dvb_frontend *fe,
+static enum fe_stv0900_fec stv0900_get_vit_fec(struct stv0900_internal *intp,
enum fe_stv0900_demod_num demod)
{
- struct stv0900_state *state = fe->demodulator_priv;
- struct stv0900_internal *i_params = state->internal;
- enum fe_stv0900_tracking_standard fnd_standard;
- s32 state_field,
- dss_dvb_field;
-
- dprintk(KERN_INFO "%s\n", __func__);
-
- dmd_reg(state_field, F0900_P1_HEADER_MODE, F0900_P2_HEADER_MODE);
- dmd_reg(dss_dvb_field, F0900_P1_DSS_DVB, F0900_P2_DSS_DVB);
-
- if (stv0900_get_bits(i_params, state_field) == 2)
- fnd_standard = STV0900_DVBS2_STANDARD;
-
- else if (stv0900_get_bits(i_params, state_field) == 3) {
- if (stv0900_get_bits(i_params, dss_dvb_field) == 1)
- fnd_standard = STV0900_DSS_STANDARD;
- else
- fnd_standard = STV0900_DVBS1_STANDARD;
- } else
- fnd_standard = STV0900_UNKNOWN_STANDARD;
-
- return fnd_standard;
-}
-
-static s32 stv0900_get_carr_freq(struct stv0900_internal *i_params, u32 mclk,
- enum fe_stv0900_demod_num demod)
-{
- s32 cfr_field2, cfr_field1, cfr_field0,
- derot, rem1, rem2, intval1, intval2;
-
- dmd_reg(cfr_field2, F0900_P1_CAR_FREQ2, F0900_P2_CAR_FREQ2);
- dmd_reg(cfr_field1, F0900_P1_CAR_FREQ1, F0900_P2_CAR_FREQ1);
- dmd_reg(cfr_field0, F0900_P1_CAR_FREQ0, F0900_P2_CAR_FREQ0);
-
- derot = (stv0900_get_bits(i_params, cfr_field2) << 16) +
- (stv0900_get_bits(i_params, cfr_field1) << 8) +
- (stv0900_get_bits(i_params, cfr_field0));
-
- derot = ge2comp(derot, 24);
- intval1 = mclk >> 12;
- intval2 = derot >> 12;
- rem1 = mclk % 0x1000;
- rem2 = derot % 0x1000;
- derot = (intval1 * intval2) +
- ((intval1 * rem2) >> 12) +
- ((intval2 * rem1) >> 12);
-
- return derot;
-}
-
-static u32 stv0900_get_tuner_freq(struct dvb_frontend *fe)
-{
- struct dvb_frontend_ops *frontend_ops = NULL;
- struct dvb_tuner_ops *tuner_ops = NULL;
- u32 frequency = 0;
-
- if (&fe->ops)
- frontend_ops = &fe->ops;
-
- if (&frontend_ops->tuner_ops)
- tuner_ops = &frontend_ops->tuner_ops;
-
- if (tuner_ops->get_frequency) {
- if ((tuner_ops->get_frequency(fe, &frequency)) < 0)
- dprintk("%s: Invalid parameter\n", __func__);
- else
- dprintk("%s: Frequency=%d\n", __func__, frequency);
-
- }
-
- return frequency;
-}
-
-static enum fe_stv0900_fec stv0900_get_vit_fec(struct stv0900_internal *i_params,
- enum fe_stv0900_demod_num demod)
-{
- s32 rate_fld, vit_curpun_fld;
enum fe_stv0900_fec prate;
-
- dmd_reg(vit_curpun_fld, F0900_P1_VIT_CURPUN, F0900_P2_VIT_CURPUN);
- rate_fld = stv0900_get_bits(i_params, vit_curpun_fld);
+ s32 rate_fld = stv0900_get_bits(intp, VIT_CURPUN);
switch (rate_fld) {
case 13:
@@ -1560,258 +790,532 @@
return prate;
}
-static enum fe_stv0900_signal_type stv0900_get_signal_params(struct dvb_frontend *fe)
+void stv0900_set_dvbs1_track_car_loop(struct stv0900_internal *intp,
+ enum fe_stv0900_demod_num demod,
+ u32 srate)
+{
+ if (intp->chip_id >= 0x30) {
+ if (srate >= 15000000) {
+ stv0900_write_reg(intp, ACLC, 0x2b);
+ stv0900_write_reg(intp, BCLC, 0x1a);
+ } else if ((srate >= 7000000) && (15000000 > srate)) {
+ stv0900_write_reg(intp, ACLC, 0x0c);
+ stv0900_write_reg(intp, BCLC, 0x1b);
+ } else if (srate < 7000000) {
+ stv0900_write_reg(intp, ACLC, 0x2c);
+ stv0900_write_reg(intp, BCLC, 0x1c);
+ }
+
+ } else { /*cut 2.0 and 1.x*/
+ stv0900_write_reg(intp, ACLC, 0x1a);
+ stv0900_write_reg(intp, BCLC, 0x09);
+ }
+
+}
+
+static void stv0900_track_optimization(struct dvb_frontend *fe)
{
struct stv0900_state *state = fe->demodulator_priv;
- struct stv0900_internal *i_params = state->internal;
+ struct stv0900_internal *intp = state->internal;
+ enum fe_stv0900_demod_num demod = state->demod;
+
+ s32 srate,
+ pilots,
+ aclc,
+ freq1,
+ freq0,
+ i = 0,
+ timed,
+ timef,
+ blind_tun_sw = 0,
+ modulation;
+
+ enum fe_stv0900_rolloff rolloff;
+ enum fe_stv0900_modcode foundModcod;
+
+ dprintk("%s\n", __func__);
+
+ srate = stv0900_get_symbol_rate(intp, intp->mclk, demod);
+ srate += stv0900_get_timing_offst(intp, srate, demod);
+
+ switch (intp->result[demod].standard) {
+ case STV0900_DVBS1_STANDARD:
+ case STV0900_DSS_STANDARD:
+ dprintk("%s: found DVB-S or DSS\n", __func__);
+ if (intp->srch_standard[demod] == STV0900_AUTO_SEARCH) {
+ stv0900_write_bits(intp, DVBS1_ENABLE, 1);
+ stv0900_write_bits(intp, DVBS2_ENABLE, 0);
+ }
+
+ stv0900_write_bits(intp, ROLLOFF_CONTROL, intp->rolloff);
+ stv0900_write_bits(intp, MANUALSX_ROLLOFF, 1);
+
+ if (intp->chip_id < 0x30) {
+ stv0900_write_reg(intp, ERRCTRL1, 0x75);
+ break;
+ }
+
+ if (stv0900_get_vit_fec(intp, demod) == STV0900_FEC_1_2) {
+ stv0900_write_reg(intp, GAUSSR0, 0x98);
+ stv0900_write_reg(intp, CCIR0, 0x18);
+ } else {
+ stv0900_write_reg(intp, GAUSSR0, 0x18);
+ stv0900_write_reg(intp, CCIR0, 0x18);
+ }
+
+ stv0900_write_reg(intp, ERRCTRL1, 0x75);
+ break;
+ case STV0900_DVBS2_STANDARD:
+ dprintk("%s: found DVB-S2\n", __func__);
+ stv0900_write_bits(intp, DVBS1_ENABLE, 0);
+ stv0900_write_bits(intp, DVBS2_ENABLE, 1);
+ stv0900_write_reg(intp, ACLC, 0);
+ stv0900_write_reg(intp, BCLC, 0);
+ if (intp->result[demod].frame_len == STV0900_LONG_FRAME) {
+ foundModcod = stv0900_get_bits(intp, DEMOD_MODCOD);
+ pilots = stv0900_get_bits(intp, DEMOD_TYPE) & 0x01;
+ aclc = stv0900_get_optim_carr_loop(srate,
+ foundModcod,
+ pilots,
+ intp->chip_id);
+ if (foundModcod <= STV0900_QPSK_910)
+ stv0900_write_reg(intp, ACLC2S2Q, aclc);
+ else if (foundModcod <= STV0900_8PSK_910) {
+ stv0900_write_reg(intp, ACLC2S2Q, 0x2a);
+ stv0900_write_reg(intp, ACLC2S28, aclc);
+ }
+
+ if ((intp->demod_mode == STV0900_SINGLE) &&
+ (foundModcod > STV0900_8PSK_910)) {
+ if (foundModcod <= STV0900_16APSK_910) {
+ stv0900_write_reg(intp, ACLC2S2Q, 0x2a);
+ stv0900_write_reg(intp, ACLC2S216A,
+ aclc);
+ } else if (foundModcod <= STV0900_32APSK_910) {
+ stv0900_write_reg(intp, ACLC2S2Q, 0x2a);
+ stv0900_write_reg(intp, ACLC2S232A,
+ aclc);
+ }
+ }
+
+ } else {
+ modulation = intp->result[demod].modulation;
+ aclc = stv0900_get_optim_short_carr_loop(srate,
+ modulation, intp->chip_id);
+ if (modulation == STV0900_QPSK)
+ stv0900_write_reg(intp, ACLC2S2Q, aclc);
+ else if (modulation == STV0900_8PSK) {
+ stv0900_write_reg(intp, ACLC2S2Q, 0x2a);
+ stv0900_write_reg(intp, ACLC2S28, aclc);
+ } else if (modulation == STV0900_16APSK) {
+ stv0900_write_reg(intp, ACLC2S2Q, 0x2a);
+ stv0900_write_reg(intp, ACLC2S216A, aclc);
+ } else if (modulation == STV0900_32APSK) {
+ stv0900_write_reg(intp, ACLC2S2Q, 0x2a);
+ stv0900_write_reg(intp, ACLC2S232A, aclc);
+ }
+
+ }
+
+ if (intp->chip_id <= 0x11) {
+ if (intp->demod_mode != STV0900_SINGLE)
+ stv0900_activate_s2_modcod(intp, demod);
+
+ }
+
+ stv0900_write_reg(intp, ERRCTRL1, 0x67);
+ break;
+ case STV0900_UNKNOWN_STANDARD:
+ default:
+ dprintk("%s: found unknown standard\n", __func__);
+ stv0900_write_bits(intp, DVBS1_ENABLE, 1);
+ stv0900_write_bits(intp, DVBS2_ENABLE, 1);
+ break;
+ }
+
+ freq1 = stv0900_read_reg(intp, CFR2);
+ freq0 = stv0900_read_reg(intp, CFR1);
+ rolloff = stv0900_get_bits(intp, ROLLOFF_STATUS);
+ if (intp->srch_algo[demod] == STV0900_BLIND_SEARCH) {
+ stv0900_write_reg(intp, SFRSTEP, 0x00);
+ stv0900_write_bits(intp, SCAN_ENABLE, 0);
+ stv0900_write_bits(intp, CFR_AUTOSCAN, 0);
+ stv0900_write_reg(intp, TMGCFG2, 0xc1);
+ stv0900_set_symbol_rate(intp, intp->mclk, srate, demod);
+ blind_tun_sw = 1;
+ if (intp->result[demod].standard != STV0900_DVBS2_STANDARD)
+ stv0900_set_dvbs1_track_car_loop(intp, demod, srate);
+
+ }
+
+ if (intp->chip_id >= 0x20) {
+ if ((intp->srch_standard[demod] == STV0900_SEARCH_DVBS1) ||
+ (intp->srch_standard[demod] ==
+ STV0900_SEARCH_DSS) ||
+ (intp->srch_standard[demod] ==
+ STV0900_AUTO_SEARCH)) {
+ stv0900_write_reg(intp, VAVSRVIT, 0x0a);
+ stv0900_write_reg(intp, VITSCALE, 0x0);
+ }
+ }
+
+ if (intp->chip_id < 0x20)
+ stv0900_write_reg(intp, CARHDR, 0x08);
+
+ if (intp->chip_id == 0x10)
+ stv0900_write_reg(intp, CORRELEXP, 0x0a);
+
+ stv0900_write_reg(intp, AGC2REF, 0x38);
+
+ if ((intp->chip_id >= 0x20) ||
+ (blind_tun_sw == 1) ||
+ (intp->symbol_rate[demod] < 10000000)) {
+ stv0900_write_reg(intp, CFRINIT1, freq1);
+ stv0900_write_reg(intp, CFRINIT0, freq0);
+ intp->bw[demod] = stv0900_carrier_width(srate,
+ intp->rolloff) + 10000000;
+
+ if ((intp->chip_id >= 0x20) || (blind_tun_sw == 1)) {
+ if (intp->srch_algo[demod] != STV0900_WARM_START)
+ stv0900_set_bandwidth(fe, intp->bw[demod]);
+ }
+
+ if ((intp->srch_algo[demod] == STV0900_BLIND_SEARCH) ||
+ (intp->symbol_rate[demod] < 10000000))
+ msleep(50);
+ else
+ msleep(5);
+
+ stv0900_get_lock_timeout(&timed, &timef, srate,
+ STV0900_WARM_START);
+
+ if (stv0900_get_demod_lock(intp, demod, timed / 2) == FALSE) {
+ stv0900_write_reg(intp, DMDISTATE, 0x1f);
+ stv0900_write_reg(intp, CFRINIT1, freq1);
+ stv0900_write_reg(intp, CFRINIT0, freq0);
+ stv0900_write_reg(intp, DMDISTATE, 0x18);
+ i = 0;
+ while ((stv0900_get_demod_lock(intp,
+ demod,
+ timed / 2) == FALSE) &&
+ (i <= 2)) {
+ stv0900_write_reg(intp, DMDISTATE, 0x1f);
+ stv0900_write_reg(intp, CFRINIT1, freq1);
+ stv0900_write_reg(intp, CFRINIT0, freq0);
+ stv0900_write_reg(intp, DMDISTATE, 0x18);
+ i++;
+ }
+ }
+
+ }
+
+ if (intp->chip_id >= 0x20)
+ stv0900_write_reg(intp, CARFREQ, 0x49);
+
+ if ((intp->result[demod].standard == STV0900_DVBS1_STANDARD) ||
+ (intp->result[demod].standard == STV0900_DSS_STANDARD))
+ stv0900_set_viterbi_tracq(intp, demod);
+
+}
+
+static int stv0900_get_fec_lock(struct stv0900_internal *intp,
+ enum fe_stv0900_demod_num demod, s32 time_out)
+{
+ s32 timer = 0, lock = 0;
+
+ enum fe_stv0900_search_state dmd_state;
+
+ dprintk("%s\n", __func__);
+
+ dmd_state = stv0900_get_bits(intp, HEADER_MODE);
+
+ while ((timer < time_out) && (lock == 0)) {
+ switch (dmd_state) {
+ case STV0900_SEARCH:
+ case STV0900_PLH_DETECTED:
+ default:
+ lock = 0;
+ break;
+ case STV0900_DVBS2_FOUND:
+ lock = stv0900_get_bits(intp, PKTDELIN_LOCK);
+ break;
+ case STV0900_DVBS_FOUND:
+ lock = stv0900_get_bits(intp, LOCKEDVIT);
+ break;
+ }
+
+ if (lock == 0) {
+ msleep(10);
+ timer += 10;
+ }
+ }
+
+ if (lock)
+ dprintk("%s: DEMOD FEC LOCK OK\n", __func__);
+ else
+ dprintk("%s: DEMOD FEC LOCK FAIL\n", __func__);
+
+ return lock;
+}
+
+static int stv0900_wait_for_lock(struct stv0900_internal *intp,
+ enum fe_stv0900_demod_num demod,
+ s32 dmd_timeout, s32 fec_timeout)
+{
+
+ s32 timer = 0, lock = 0;
+
+ dprintk("%s\n", __func__);
+
+ lock = stv0900_get_demod_lock(intp, demod, dmd_timeout);
+
+ if (lock)
+ lock = lock && stv0900_get_fec_lock(intp, demod, fec_timeout);
+
+ if (lock) {
+ lock = 0;
+
+ dprintk("%s: Timer = %d, time_out = %d\n",
+ __func__, timer, fec_timeout);
+
+ while ((timer < fec_timeout) && (lock == 0)) {
+ lock = stv0900_get_bits(intp, TSFIFO_LINEOK);
+ msleep(1);
+ timer++;
+ }
+ }
+
+ if (lock)
+ dprintk("%s: DEMOD LOCK OK\n", __func__);
+ else
+ dprintk("%s: DEMOD LOCK FAIL\n", __func__);
+
+ if (lock)
+ return TRUE;
+ else
+ return FALSE;
+}
+
+enum fe_stv0900_tracking_standard stv0900_get_standard(struct dvb_frontend *fe,
+ enum fe_stv0900_demod_num demod)
+{
+ struct stv0900_state *state = fe->demodulator_priv;
+ struct stv0900_internal *intp = state->internal;
+ enum fe_stv0900_tracking_standard fnd_standard;
+
+ int hdr_mode = stv0900_get_bits(intp, HEADER_MODE);
+
+ switch (hdr_mode) {
+ case 2:
+ fnd_standard = STV0900_DVBS2_STANDARD;
+ break;
+ case 3:
+ if (stv0900_get_bits(intp, DSS_DVB) == 1)
+ fnd_standard = STV0900_DSS_STANDARD;
+ else
+ fnd_standard = STV0900_DVBS1_STANDARD;
+
+ break;
+ default:
+ fnd_standard = STV0900_UNKNOWN_STANDARD;
+ }
+
+ dprintk("%s: standard %d\n", __func__, fnd_standard);
+
+ return fnd_standard;
+}
+
+static s32 stv0900_get_carr_freq(struct stv0900_internal *intp, u32 mclk,
+ enum fe_stv0900_demod_num demod)
+{
+ s32 derot,
+ rem1,
+ rem2,
+ intval1,
+ intval2;
+
+ derot = (stv0900_get_bits(intp, CAR_FREQ2) << 16) +
+ (stv0900_get_bits(intp, CAR_FREQ1) << 8) +
+ (stv0900_get_bits(intp, CAR_FREQ0));
+
+ derot = ge2comp(derot, 24);
+ intval1 = mclk >> 12;
+ intval2 = derot >> 12;
+ rem1 = mclk % 0x1000;
+ rem2 = derot % 0x1000;
+ derot = (intval1 * intval2) +
+ ((intval1 * rem2) >> 12) +
+ ((intval2 * rem1) >> 12);
+
+ return derot;
+}
+
+static u32 stv0900_get_tuner_freq(struct dvb_frontend *fe)
+{
+ struct dvb_frontend_ops *frontend_ops = NULL;
+ struct dvb_tuner_ops *tuner_ops = NULL;
+ u32 freq = 0;
+
+ if (&fe->ops)
+ frontend_ops = &fe->ops;
+
+ if (&frontend_ops->tuner_ops)
+ tuner_ops = &frontend_ops->tuner_ops;
+
+ if (tuner_ops->get_frequency) {
+ if ((tuner_ops->get_frequency(fe, &freq)) < 0)
+ dprintk("%s: Invalid parameter\n", __func__);
+ else
+ dprintk("%s: Frequency=%d\n", __func__, freq);
+
+ }
+
+ return freq;
+}
+
+static enum
+fe_stv0900_signal_type stv0900_get_signal_params(struct dvb_frontend *fe)
+{
+ struct stv0900_state *state = fe->demodulator_priv;
+ struct stv0900_internal *intp = state->internal;
enum fe_stv0900_demod_num demod = state->demod;
enum fe_stv0900_signal_type range = STV0900_OUTOFRANGE;
- s32 offsetFreq,
- srate_offset,
- i = 0;
+ struct stv0900_signal_info *result = &intp->result[demod];
+ s32 offsetFreq,
+ srate_offset;
+ int i = 0,
+ d = demod;
u8 timing;
msleep(5);
- switch (demod) {
- case STV0900_DEMOD_1:
- default:
- if (i_params->dmd1_srch_algo == STV0900_BLIND_SEARCH) {
- timing = stv0900_read_reg(i_params, R0900_P1_TMGREG2);
- i = 0;
- stv0900_write_reg(i_params, R0900_P1_SFRSTEP, 0x5c);
+ if (intp->srch_algo[d] == STV0900_BLIND_SEARCH) {
+ timing = stv0900_read_reg(intp, TMGREG2);
+ i = 0;
+ stv0900_write_reg(intp, SFRSTEP, 0x5c);
- while ((i <= 50) && (timing != 0) && (timing != 0xFF)) {
- timing = stv0900_read_reg(i_params, R0900_P1_TMGREG2);
- msleep(5);
- i += 5;
- }
+ while ((i <= 50) && (timing != 0) && (timing != 0xff)) {
+ timing = stv0900_read_reg(intp, TMGREG2);
+ msleep(5);
+ i += 5;
}
+ }
- i_params->dmd1_rslts.standard = stv0900_get_standard(fe, demod);
- i_params->dmd1_rslts.frequency = stv0900_get_tuner_freq(fe);
- offsetFreq = stv0900_get_carr_freq(i_params, i_params->mclk, demod) / 1000;
- i_params->dmd1_rslts.frequency += offsetFreq;
- i_params->dmd1_rslts.symbol_rate = stv0900_get_symbol_rate(i_params, i_params->mclk, demod);
- srate_offset = stv0900_get_timing_offst(i_params, i_params->dmd1_rslts.symbol_rate, demod);
- i_params->dmd1_rslts.symbol_rate += srate_offset;
- i_params->dmd1_rslts.fec = stv0900_get_vit_fec(i_params, demod);
- i_params->dmd1_rslts.modcode = stv0900_get_bits(i_params, F0900_P1_DEMOD_MODCOD);
- i_params->dmd1_rslts.pilot = stv0900_get_bits(i_params, F0900_P1_DEMOD_TYPE) & 0x01;
- i_params->dmd1_rslts.frame_length = ((u32)stv0900_get_bits(i_params, F0900_P1_DEMOD_TYPE)) >> 1;
- i_params->dmd1_rslts.rolloff = stv0900_get_bits(i_params, F0900_P1_ROLLOFF_STATUS);
- switch (i_params->dmd1_rslts.standard) {
- case STV0900_DVBS2_STANDARD:
- i_params->dmd1_rslts.spectrum = stv0900_get_bits(i_params, F0900_P1_SPECINV_DEMOD);
- if (i_params->dmd1_rslts.modcode <= STV0900_QPSK_910)
- i_params->dmd1_rslts.modulation = STV0900_QPSK;
- else if (i_params->dmd1_rslts.modcode <= STV0900_8PSK_910)
- i_params->dmd1_rslts.modulation = STV0900_8PSK;
- else if (i_params->dmd1_rslts.modcode <= STV0900_16APSK_910)
- i_params->dmd1_rslts.modulation = STV0900_16APSK;
- else if (i_params->dmd1_rslts.modcode <= STV0900_32APSK_910)
- i_params->dmd1_rslts.modulation = STV0900_32APSK;
- else
- i_params->dmd1_rslts.modulation = STV0900_UNKNOWN;
- break;
- case STV0900_DVBS1_STANDARD:
- case STV0900_DSS_STANDARD:
- i_params->dmd1_rslts.spectrum = stv0900_get_bits(i_params, F0900_P1_IQINV);
- i_params->dmd1_rslts.modulation = STV0900_QPSK;
- break;
- default:
- break;
- }
-
- if ((i_params->dmd1_srch_algo == STV0900_BLIND_SEARCH) || (i_params->dmd1_symbol_rate < 10000000)) {
- offsetFreq = i_params->dmd1_rslts.frequency - i_params->tuner1_freq;
- i_params->tuner1_freq = stv0900_get_tuner_freq(fe);
- if (ABS(offsetFreq) <= ((i_params->dmd1_srch_range / 2000) + 500))
- range = STV0900_RANGEOK;
- else
- if (ABS(offsetFreq) <= (stv0900_carrier_width(i_params->dmd1_rslts.symbol_rate, i_params->dmd1_rslts.rolloff) / 2000))
- range = STV0900_RANGEOK;
- else
- range = STV0900_OUTOFRANGE;
-
- } else {
- if (ABS(offsetFreq) <= ((i_params->dmd1_srch_range / 2000) + 500))
- range = STV0900_RANGEOK;
- else
- range = STV0900_OUTOFRANGE;
- }
+ result->standard = stv0900_get_standard(fe, d);
+ result->frequency = stv0900_get_tuner_freq(fe);
+ offsetFreq = stv0900_get_carr_freq(intp, intp->mclk, d) / 1000;
+ result->frequency += offsetFreq;
+ result->symbol_rate = stv0900_get_symbol_rate(intp, intp->mclk, d);
+ srate_offset = stv0900_get_timing_offst(intp, result->symbol_rate, d);
+ result->symbol_rate += srate_offset;
+ result->fec = stv0900_get_vit_fec(intp, d);
+ result->modcode = stv0900_get_bits(intp, DEMOD_MODCOD);
+ result->pilot = stv0900_get_bits(intp, DEMOD_TYPE) & 0x01;
+ result->frame_len = ((u32)stv0900_get_bits(intp, DEMOD_TYPE)) >> 1;
+ result->rolloff = stv0900_get_bits(intp, ROLLOFF_STATUS);
+ switch (result->standard) {
+ case STV0900_DVBS2_STANDARD:
+ result->spectrum = stv0900_get_bits(intp, SPECINV_DEMOD);
+ if (result->modcode <= STV0900_QPSK_910)
+ result->modulation = STV0900_QPSK;
+ else if (result->modcode <= STV0900_8PSK_910)
+ result->modulation = STV0900_8PSK;
+ else if (result->modcode <= STV0900_16APSK_910)
+ result->modulation = STV0900_16APSK;
+ else if (result->modcode <= STV0900_32APSK_910)
+ result->modulation = STV0900_32APSK;
+ else
+ result->modulation = STV0900_UNKNOWN;
break;
- case STV0900_DEMOD_2:
- if (i_params->dmd2_srch_algo == STV0900_BLIND_SEARCH) {
- timing = stv0900_read_reg(i_params, R0900_P2_TMGREG2);
- i = 0;
- stv0900_write_reg(i_params, R0900_P2_SFRSTEP, 0x5c);
-
- while ((i <= 50) && (timing != 0) && (timing != 0xff)) {
- timing = stv0900_read_reg(i_params, R0900_P2_TMGREG2);
- msleep(5);
- i += 5;
- }
- }
-
- i_params->dmd2_rslts.standard = stv0900_get_standard(fe, demod);
- i_params->dmd2_rslts.frequency = stv0900_get_tuner_freq(fe);
- offsetFreq = stv0900_get_carr_freq(i_params, i_params->mclk, demod) / 1000;
- i_params->dmd2_rslts.frequency += offsetFreq;
- i_params->dmd2_rslts.symbol_rate = stv0900_get_symbol_rate(i_params, i_params->mclk, demod);
- srate_offset = stv0900_get_timing_offst(i_params, i_params->dmd2_rslts.symbol_rate, demod);
- i_params->dmd2_rslts.symbol_rate += srate_offset;
- i_params->dmd2_rslts.fec = stv0900_get_vit_fec(i_params, demod);
- i_params->dmd2_rslts.modcode = stv0900_get_bits(i_params, F0900_P2_DEMOD_MODCOD);
- i_params->dmd2_rslts.pilot = stv0900_get_bits(i_params, F0900_P2_DEMOD_TYPE) & 0x01;
- i_params->dmd2_rslts.frame_length = ((u32)stv0900_get_bits(i_params, F0900_P2_DEMOD_TYPE)) >> 1;
- i_params->dmd2_rslts.rolloff = stv0900_get_bits(i_params, F0900_P2_ROLLOFF_STATUS);
- switch (i_params->dmd2_rslts.standard) {
- case STV0900_DVBS2_STANDARD:
- i_params->dmd2_rslts.spectrum = stv0900_get_bits(i_params, F0900_P2_SPECINV_DEMOD);
- if (i_params->dmd2_rslts.modcode <= STV0900_QPSK_910)
- i_params->dmd2_rslts.modulation = STV0900_QPSK;
- else if (i_params->dmd2_rslts.modcode <= STV0900_8PSK_910)
- i_params->dmd2_rslts.modulation = STV0900_8PSK;
- else if (i_params->dmd2_rslts.modcode <= STV0900_16APSK_910)
- i_params->dmd2_rslts.modulation = STV0900_16APSK;
- else if (i_params->dmd2_rslts.modcode <= STV0900_32APSK_910)
- i_params->dmd2_rslts.modulation = STV0900_32APSK;
- else
- i_params->dmd2_rslts.modulation = STV0900_UNKNOWN;
- break;
- case STV0900_DVBS1_STANDARD:
- case STV0900_DSS_STANDARD:
- i_params->dmd2_rslts.spectrum = stv0900_get_bits(i_params, F0900_P2_IQINV);
- i_params->dmd2_rslts.modulation = STV0900_QPSK;
- break;
- default:
- break;
- }
-
- if ((i_params->dmd2_srch_algo == STV0900_BLIND_SEARCH) || (i_params->dmd2_symbol_rate < 10000000)) {
- offsetFreq = i_params->dmd2_rslts.frequency - i_params->tuner2_freq;
- i_params->tuner2_freq = stv0900_get_tuner_freq(fe);
-
- if (ABS(offsetFreq) <= ((i_params->dmd2_srch_range / 2000) + 500))
- range = STV0900_RANGEOK;
- else
- if (ABS(offsetFreq) <= (stv0900_carrier_width(i_params->dmd2_rslts.symbol_rate, i_params->dmd2_rslts.rolloff) / 2000))
- range = STV0900_RANGEOK;
- else
- range = STV0900_OUTOFRANGE;
- } else {
- if (ABS(offsetFreq) <= ((i_params->dmd2_srch_range / 2000) + 500))
- range = STV0900_RANGEOK;
- else
- range = STV0900_OUTOFRANGE;
- }
-
+ case STV0900_DVBS1_STANDARD:
+ case STV0900_DSS_STANDARD:
+ result->spectrum = stv0900_get_bits(intp, IQINV);
+ result->modulation = STV0900_QPSK;
+ break;
+ default:
break;
}
+ if ((intp->srch_algo[d] == STV0900_BLIND_SEARCH) ||
+ (intp->symbol_rate[d] < 10000000)) {
+ offsetFreq = result->frequency - intp->freq[d];
+ intp->freq[d] = stv0900_get_tuner_freq(fe);
+ if (ABS(offsetFreq) <= ((intp->srch_range[d] / 2000) + 500))
+ range = STV0900_RANGEOK;
+ else if (ABS(offsetFreq) <=
+ (stv0900_carrier_width(result->symbol_rate,
+ result->rolloff) / 2000))
+ range = STV0900_RANGEOK;
+
+ } else if (ABS(offsetFreq) <= ((intp->srch_range[d] / 2000) + 500))
+ range = STV0900_RANGEOK;
+
+ dprintk("%s: range %d\n", __func__, range);
+
return range;
}
-static enum fe_stv0900_signal_type stv0900_dvbs1_acq_workaround(struct dvb_frontend *fe)
+static enum
+fe_stv0900_signal_type stv0900_dvbs1_acq_workaround(struct dvb_frontend *fe)
{
struct stv0900_state *state = fe->demodulator_priv;
- struct stv0900_internal *i_params = state->internal;
+ struct stv0900_internal *intp = state->internal;
enum fe_stv0900_demod_num demod = state->demod;
-
- s32 srate, demod_timeout,
- fec_timeout, freq1, freq0;
enum fe_stv0900_signal_type signal_type = STV0900_NODATA;
- switch (demod) {
- case STV0900_DEMOD_1:
- default:
- i_params->dmd1_rslts.locked = FALSE;
- if (stv0900_get_bits(i_params, F0900_P1_HEADER_MODE) == STV0900_DVBS_FOUND) {
- srate = stv0900_get_symbol_rate(i_params, i_params->mclk, demod);
- srate += stv0900_get_timing_offst(i_params, srate, demod);
- if (i_params->dmd1_srch_algo == STV0900_BLIND_SEARCH)
- stv0900_set_symbol_rate(i_params, i_params->mclk, srate, demod);
+ s32 srate,
+ demod_timeout,
+ fec_timeout,
+ freq1,
+ freq0;
- stv0900_get_lock_timeout(&demod_timeout, &fec_timeout, srate, STV0900_WARM_START);
- freq1 = stv0900_read_reg(i_params, R0900_P1_CFR2);
- freq0 = stv0900_read_reg(i_params, R0900_P1_CFR1);
- stv0900_write_bits(i_params, F0900_P1_CFR_AUTOSCAN, 0);
- stv0900_write_bits(i_params, F0900_P1_SPECINV_CONTROL, STV0900_IQ_FORCE_SWAPPED);
- stv0900_write_reg(i_params, R0900_P1_DMDISTATE, 0x1C);
- stv0900_write_reg(i_params, R0900_P1_CFRINIT1, freq1);
- stv0900_write_reg(i_params, R0900_P1_CFRINIT0, freq0);
- stv0900_write_reg(i_params, R0900_P1_DMDISTATE, 0x18);
- if (stv0900_wait_for_lock(i_params, demod, demod_timeout, fec_timeout) == TRUE) {
- i_params->dmd1_rslts.locked = TRUE;
+ intp->result[demod].locked = FALSE;
+
+ if (stv0900_get_bits(intp, HEADER_MODE) == STV0900_DVBS_FOUND) {
+ srate = stv0900_get_symbol_rate(intp, intp->mclk, demod);
+ srate += stv0900_get_timing_offst(intp, srate, demod);
+ if (intp->srch_algo[demod] == STV0900_BLIND_SEARCH)
+ stv0900_set_symbol_rate(intp, intp->mclk, srate, demod);
+
+ stv0900_get_lock_timeout(&demod_timeout, &fec_timeout,
+ srate, STV0900_WARM_START);
+ freq1 = stv0900_read_reg(intp, CFR2);
+ freq0 = stv0900_read_reg(intp, CFR1);
+ stv0900_write_bits(intp, CFR_AUTOSCAN, 0);
+ stv0900_write_bits(intp, SPECINV_CONTROL,
+ STV0900_IQ_FORCE_SWAPPED);
+ stv0900_write_reg(intp, DMDISTATE, 0x1c);
+ stv0900_write_reg(intp, CFRINIT1, freq1);
+ stv0900_write_reg(intp, CFRINIT0, freq0);
+ stv0900_write_reg(intp, DMDISTATE, 0x18);
+ if (stv0900_wait_for_lock(intp, demod,
+ demod_timeout, fec_timeout) == TRUE) {
+ intp->result[demod].locked = TRUE;
+ signal_type = stv0900_get_signal_params(fe);
+ stv0900_track_optimization(fe);
+ } else {
+ stv0900_write_bits(intp, SPECINV_CONTROL,
+ STV0900_IQ_FORCE_NORMAL);
+ stv0900_write_reg(intp, DMDISTATE, 0x1c);
+ stv0900_write_reg(intp, CFRINIT1, freq1);
+ stv0900_write_reg(intp, CFRINIT0, freq0);
+ stv0900_write_reg(intp, DMDISTATE, 0x18);
+ if (stv0900_wait_for_lock(intp, demod,
+ demod_timeout, fec_timeout) == TRUE) {
+ intp->result[demod].locked = TRUE;
signal_type = stv0900_get_signal_params(fe);
stv0900_track_optimization(fe);
- } else {
- stv0900_write_bits(i_params, F0900_P1_SPECINV_CONTROL, STV0900_IQ_FORCE_NORMAL);
- stv0900_write_reg(i_params, R0900_P1_DMDISTATE, 0x1c);
- stv0900_write_reg(i_params, R0900_P1_CFRINIT1, freq1);
- stv0900_write_reg(i_params, R0900_P1_CFRINIT0, freq0);
- stv0900_write_reg(i_params, R0900_P1_DMDISTATE, 0x18);
- if (stv0900_wait_for_lock(i_params, demod, demod_timeout, fec_timeout) == TRUE) {
- i_params->dmd1_rslts.locked = TRUE;
- signal_type = stv0900_get_signal_params(fe);
- stv0900_track_optimization(fe);
- }
-
}
- } else
- i_params->dmd1_rslts.locked = FALSE;
+ }
- break;
- case STV0900_DEMOD_2:
- i_params->dmd2_rslts.locked = FALSE;
- if (stv0900_get_bits(i_params, F0900_P2_HEADER_MODE) == STV0900_DVBS_FOUND) {
- srate = stv0900_get_symbol_rate(i_params, i_params->mclk, demod);
- srate += stv0900_get_timing_offst(i_params, srate, demod);
-
- if (i_params->dmd2_srch_algo == STV0900_BLIND_SEARCH)
- stv0900_set_symbol_rate(i_params, i_params->mclk, srate, demod);
-
- stv0900_get_lock_timeout(&demod_timeout, &fec_timeout, srate, STV0900_WARM_START);
- freq1 = stv0900_read_reg(i_params, R0900_P2_CFR2);
- freq0 = stv0900_read_reg(i_params, R0900_P2_CFR1);
- stv0900_write_bits(i_params, F0900_P2_CFR_AUTOSCAN, 0);
- stv0900_write_bits(i_params, F0900_P2_SPECINV_CONTROL, STV0900_IQ_FORCE_SWAPPED);
- stv0900_write_reg(i_params, R0900_P2_DMDISTATE, 0x1C);
- stv0900_write_reg(i_params, R0900_P2_CFRINIT1, freq1);
- stv0900_write_reg(i_params, R0900_P2_CFRINIT0, freq0);
- stv0900_write_reg(i_params, R0900_P2_DMDISTATE, 0x18);
-
- if (stv0900_wait_for_lock(i_params, demod, demod_timeout, fec_timeout) == TRUE) {
- i_params->dmd2_rslts.locked = TRUE;
- signal_type = stv0900_get_signal_params(fe);
- stv0900_track_optimization(fe);
- } else {
- stv0900_write_bits(i_params, F0900_P2_SPECINV_CONTROL, STV0900_IQ_FORCE_NORMAL);
- stv0900_write_reg(i_params, R0900_P2_DMDISTATE, 0x1c);
- stv0900_write_reg(i_params, R0900_P2_CFRINIT1, freq1);
- stv0900_write_reg(i_params, R0900_P2_CFRINIT0, freq0);
- stv0900_write_reg(i_params, R0900_P2_DMDISTATE, 0x18);
-
- if (stv0900_wait_for_lock(i_params, demod, demod_timeout, fec_timeout) == TRUE) {
- i_params->dmd2_rslts.locked = TRUE;
- signal_type = stv0900_get_signal_params(fe);
- stv0900_track_optimization(fe);
- }
-
- }
-
- } else
- i_params->dmd1_rslts.locked = FALSE;
-
- break;
- }
+ } else
+ intp->result[demod].locked = FALSE;
return signal_type;
}
-static u16 stv0900_blind_check_agc2_min_level(struct stv0900_internal *i_params,
+static u16 stv0900_blind_check_agc2_min_level(struct stv0900_internal *intp,
enum fe_stv0900_demod_num demod)
{
u32 minagc2level = 0xffff,
@@ -1820,105 +1324,54 @@
s32 i, j, nb_steps, direction;
- dprintk(KERN_INFO "%s\n", __func__);
+ dprintk("%s\n", __func__);
- switch (demod) {
- case STV0900_DEMOD_1:
- default:
- stv0900_write_reg(i_params, R0900_P1_AGC2REF, 0x38);
- stv0900_write_bits(i_params, F0900_P1_SCAN_ENABLE, 1);
- stv0900_write_bits(i_params, F0900_P1_CFR_AUTOSCAN, 1);
+ stv0900_write_reg(intp, AGC2REF, 0x38);
+ stv0900_write_bits(intp, SCAN_ENABLE, 0);
+ stv0900_write_bits(intp, CFR_AUTOSCAN, 0);
- stv0900_write_reg(i_params, R0900_P1_SFRUP1, 0x83);
- stv0900_write_reg(i_params, R0900_P1_SFRUP0, 0xc0);
+ stv0900_write_bits(intp, AUTO_GUP, 1);
+ stv0900_write_bits(intp, AUTO_GLOW, 1);
- stv0900_write_reg(i_params, R0900_P1_SFRLOW1, 0x82);
- stv0900_write_reg(i_params, R0900_P1_SFRLOW0, 0xa0);
- stv0900_write_reg(i_params, R0900_P1_DMDT0M, 0x0);
+ stv0900_write_reg(intp, DMDT0M, 0x0);
- stv0900_set_symbol_rate(i_params, i_params->mclk, 1000000, demod);
- nb_steps = -1 + (i_params->dmd1_srch_range / 1000000);
- nb_steps /= 2;
- nb_steps = (2 * nb_steps) + 1;
+ stv0900_set_symbol_rate(intp, intp->mclk, 1000000, demod);
+ nb_steps = -1 + (intp->srch_range[demod] / 1000000);
+ nb_steps /= 2;
+ nb_steps = (2 * nb_steps) + 1;
- if (nb_steps < 0)
- nb_steps = 1;
+ if (nb_steps < 0)
+ nb_steps = 1;
- direction = 1;
+ direction = 1;
- freq_step = (1000000 << 8) / (i_params->mclk >> 8);
+ freq_step = (1000000 << 8) / (intp->mclk >> 8);
- init_freq = 0;
+ init_freq = 0;
- for (i = 0; i < nb_steps; i++) {
- if (direction > 0)
- init_freq = init_freq + (freq_step * i);
- else
- init_freq = init_freq - (freq_step * i);
+ for (i = 0; i < nb_steps; i++) {
+ if (direction > 0)
+ init_freq = init_freq + (freq_step * i);
+ else
+ init_freq = init_freq - (freq_step * i);
- direction *= -1;
- stv0900_write_reg(i_params, R0900_P1_DMDISTATE, 0x5C);
- stv0900_write_reg(i_params, R0900_P1_CFRINIT1, (init_freq >> 8) & 0xff);
- stv0900_write_reg(i_params, R0900_P1_CFRINIT0, init_freq & 0xff);
- stv0900_write_reg(i_params, R0900_P1_DMDISTATE, 0x58);
- msleep(10);
- agc2level = 0;
+ direction *= -1;
+ stv0900_write_reg(intp, DMDISTATE, 0x5C);
+ stv0900_write_reg(intp, CFRINIT1, (init_freq >> 8) & 0xff);
+ stv0900_write_reg(intp, CFRINIT0, init_freq & 0xff);
+ stv0900_write_reg(intp, DMDISTATE, 0x58);
+ msleep(10);
+ agc2level = 0;
- for (j = 0; j < 10; j++)
- agc2level += (stv0900_read_reg(i_params, R0900_P1_AGC2I1) << 8)
- | stv0900_read_reg(i_params, R0900_P1_AGC2I0);
+ for (j = 0; j < 10; j++)
+ agc2level += (stv0900_read_reg(intp, AGC2I1) << 8)
+ | stv0900_read_reg(intp, AGC2I0);
- agc2level /= 10;
+ agc2level /= 10;
- if (agc2level < minagc2level)
- minagc2level = agc2level;
- }
- break;
- case STV0900_DEMOD_2:
- stv0900_write_reg(i_params, R0900_P2_AGC2REF, 0x38);
- stv0900_write_bits(i_params, F0900_P2_SCAN_ENABLE, 1);
- stv0900_write_bits(i_params, F0900_P2_CFR_AUTOSCAN, 1);
- stv0900_write_reg(i_params, R0900_P2_SFRUP1, 0x83);
- stv0900_write_reg(i_params, R0900_P2_SFRUP0, 0xc0);
- stv0900_write_reg(i_params, R0900_P2_SFRLOW1, 0x82);
- stv0900_write_reg(i_params, R0900_P2_SFRLOW0, 0xa0);
- stv0900_write_reg(i_params, R0900_P2_DMDT0M, 0x0);
- stv0900_set_symbol_rate(i_params, i_params->mclk, 1000000, demod);
- nb_steps = -1 + (i_params->dmd2_srch_range / 1000000);
- nb_steps /= 2;
- nb_steps = (2 * nb_steps) + 1;
+ if (agc2level < minagc2level)
+ minagc2level = agc2level;
- if (nb_steps < 0)
- nb_steps = 1;
-
- direction = 1;
- freq_step = (1000000 << 8) / (i_params->mclk >> 8);
- init_freq = 0;
- for (i = 0; i < nb_steps; i++) {
- if (direction > 0)
- init_freq = init_freq + (freq_step * i);
- else
- init_freq = init_freq - (freq_step * i);
-
- direction *= -1;
-
- stv0900_write_reg(i_params, R0900_P2_DMDISTATE, 0x5C);
- stv0900_write_reg(i_params, R0900_P2_CFRINIT1, (init_freq >> 8) & 0xff);
- stv0900_write_reg(i_params, R0900_P2_CFRINIT0, init_freq & 0xff);
- stv0900_write_reg(i_params, R0900_P2_DMDISTATE, 0x58);
-
- msleep(10);
- agc2level = 0;
- for (j = 0; j < 10; j++)
- agc2level += (stv0900_read_reg(i_params, R0900_P2_AGC2I1) << 8)
- | stv0900_read_reg(i_params, R0900_P2_AGC2I0);
-
- agc2level /= 10;
-
- if (agc2level < minagc2level)
- minagc2level = agc2level;
- }
- break;
}
return (u16)minagc2level;
@@ -1927,336 +1380,192 @@
static u32 stv0900_search_srate_coarse(struct dvb_frontend *fe)
{
struct stv0900_state *state = fe->demodulator_priv;
- struct stv0900_internal *i_params = state->internal;
+ struct stv0900_internal *intp = state->internal;
enum fe_stv0900_demod_num demod = state->demod;
- int timingLock = FALSE;
+ int timing_lck = FALSE;
s32 i, timingcpt = 0,
direction = 1,
nb_steps,
current_step = 0,
tuner_freq;
+ u32 agc2_th,
+ coarse_srate = 0,
+ agc2_integr = 0,
+ currier_step = 1200;
- u32 coarse_srate = 0, agc2_integr = 0, currier_step = 1200;
+ if (intp->chip_id >= 0x30)
+ agc2_th = 0x2e00;
+ else
+ agc2_th = 0x1f00;
- switch (demod) {
- case STV0900_DEMOD_1:
- default:
- stv0900_write_bits(i_params, F0900_P1_I2C_DEMOD_MODE, 0x1F);
- stv0900_write_reg(i_params, R0900_P1_TMGCFG, 0x12);
- stv0900_write_reg(i_params, R0900_P1_TMGTHRISE, 0xf0);
- stv0900_write_reg(i_params, R0900_P1_TMGTHFALL, 0xe0);
- stv0900_write_bits(i_params, F0900_P1_SCAN_ENABLE, 1);
- stv0900_write_bits(i_params, F0900_P1_CFR_AUTOSCAN, 1);
- stv0900_write_reg(i_params, R0900_P1_SFRUP1, 0x83);
- stv0900_write_reg(i_params, R0900_P1_SFRUP0, 0xc0);
- stv0900_write_reg(i_params, R0900_P1_SFRLOW1, 0x82);
- stv0900_write_reg(i_params, R0900_P1_SFRLOW0, 0xa0);
- stv0900_write_reg(i_params, R0900_P1_DMDT0M, 0x0);
- stv0900_write_reg(i_params, R0900_P1_AGC2REF, 0x50);
+ stv0900_write_bits(intp, DEMOD_MODE, 0x1f);
+ stv0900_write_reg(intp, TMGCFG, 0x12);
+ stv0900_write_reg(intp, TMGTHRISE, 0xf0);
+ stv0900_write_reg(intp, TMGTHFALL, 0xe0);
+ stv0900_write_bits(intp, SCAN_ENABLE, 1);
+ stv0900_write_bits(intp, CFR_AUTOSCAN, 1);
+ stv0900_write_reg(intp, SFRUP1, 0x83);
+ stv0900_write_reg(intp, SFRUP0, 0xc0);
+ stv0900_write_reg(intp, SFRLOW1, 0x82);
+ stv0900_write_reg(intp, SFRLOW0, 0xa0);
+ stv0900_write_reg(intp, DMDT0M, 0x0);
+ stv0900_write_reg(intp, AGC2REF, 0x50);
- if (i_params->chip_id >= 0x20) {
- stv0900_write_reg(i_params, R0900_P1_CARFREQ, 0x6a);
- stv0900_write_reg(i_params, R0900_P1_SFRSTEP, 0x95);
- } else {
- stv0900_write_reg(i_params, R0900_P1_CARFREQ, 0xed);
- stv0900_write_reg(i_params, R0900_P1_SFRSTEP, 0x73);
- }
-
- if (i_params->dmd1_symbol_rate <= 2000000)
- currier_step = 1000;
- else if (i_params->dmd1_symbol_rate <= 5000000)
- currier_step = 2000;
- else if (i_params->dmd1_symbol_rate <= 12000000)
- currier_step = 3000;
- else
- currier_step = 5000;
-
- nb_steps = -1 + ((i_params->dmd1_srch_range / 1000) / currier_step);
- nb_steps /= 2;
- nb_steps = (2 * nb_steps) + 1;
-
- if (nb_steps < 0)
- nb_steps = 1;
-
- else if (nb_steps > 10) {
- nb_steps = 11;
- currier_step = (i_params->dmd1_srch_range / 1000) / 10;
- }
-
- current_step = 0;
-
- direction = 1;
- tuner_freq = i_params->tuner1_freq;
-
- while ((timingLock == FALSE) && (current_step < nb_steps)) {
- stv0900_write_reg(i_params, R0900_P1_DMDISTATE, 0x5F);
- stv0900_write_bits(i_params, F0900_P1_I2C_DEMOD_MODE, 0x0);
-
- msleep(50);
-
- for (i = 0; i < 10; i++) {
- if (stv0900_get_bits(i_params, F0900_P1_TMGLOCK_QUALITY) >= 2)
- timingcpt++;
-
- agc2_integr += (stv0900_read_reg(i_params, R0900_P1_AGC2I1) << 8) | stv0900_read_reg(i_params, R0900_P1_AGC2I0);
-
- }
-
- agc2_integr /= 10;
- coarse_srate = stv0900_get_symbol_rate(i_params, i_params->mclk, demod);
- current_step++;
- direction *= -1;
-
- dprintk("lock: I2C_DEMOD_MODE_FIELD =0. Search started. tuner freq=%d agc2=0x%x srate_coarse=%d tmg_cpt=%d\n", tuner_freq, agc2_integr, coarse_srate, timingcpt);
-
- if ((timingcpt >= 5) && (agc2_integr < 0x1F00) && (coarse_srate < 55000000) && (coarse_srate > 850000)) {
- timingLock = TRUE;
- }
-
- else if (current_step < nb_steps) {
- if (direction > 0)
- tuner_freq += (current_step * currier_step);
- else
- tuner_freq -= (current_step * currier_step);
-
- stv0900_set_tuner(fe, tuner_freq, i_params->tuner1_bw);
- }
- }
-
- if (timingLock == FALSE)
- coarse_srate = 0;
- else
- coarse_srate = stv0900_get_symbol_rate(i_params, i_params->mclk, demod);
- break;
- case STV0900_DEMOD_2:
- stv0900_write_bits(i_params, F0900_P2_I2C_DEMOD_MODE, 0x1F);
- stv0900_write_reg(i_params, R0900_P2_TMGCFG, 0x12);
- stv0900_write_reg(i_params, R0900_P2_TMGTHRISE, 0xf0);
- stv0900_write_reg(i_params, R0900_P2_TMGTHFALL, 0xe0);
- stv0900_write_bits(i_params, F0900_P2_SCAN_ENABLE, 1);
- stv0900_write_bits(i_params, F0900_P2_CFR_AUTOSCAN, 1);
- stv0900_write_reg(i_params, R0900_P2_SFRUP1, 0x83);
- stv0900_write_reg(i_params, R0900_P2_SFRUP0, 0xc0);
- stv0900_write_reg(i_params, R0900_P2_SFRLOW1, 0x82);
- stv0900_write_reg(i_params, R0900_P2_SFRLOW0, 0xa0);
- stv0900_write_reg(i_params, R0900_P2_DMDT0M, 0x0);
- stv0900_write_reg(i_params, R0900_P2_AGC2REF, 0x50);
-
- if (i_params->chip_id >= 0x20) {
- stv0900_write_reg(i_params, R0900_P2_CARFREQ, 0x6a);
- stv0900_write_reg(i_params, R0900_P2_SFRSTEP, 0x95);
- } else {
- stv0900_write_reg(i_params, R0900_P2_CARFREQ, 0xed);
- stv0900_write_reg(i_params, R0900_P2_SFRSTEP, 0x73);
- }
-
- if (i_params->dmd2_symbol_rate <= 2000000)
- currier_step = 1000;
- else if (i_params->dmd2_symbol_rate <= 5000000)
- currier_step = 2000;
- else if (i_params->dmd2_symbol_rate <= 12000000)
- currier_step = 3000;
- else
- currier_step = 5000;
-
-
- nb_steps = -1 + ((i_params->dmd2_srch_range / 1000) / currier_step);
- nb_steps /= 2;
- nb_steps = (2 * nb_steps) + 1;
-
- if (nb_steps < 0)
- nb_steps = 1;
- else if (nb_steps > 10) {
- nb_steps = 11;
- currier_step = (i_params->dmd2_srch_range / 1000) / 10;
- }
-
- current_step = 0;
- direction = 1;
- tuner_freq = i_params->tuner2_freq;
-
- while ((timingLock == FALSE) && (current_step < nb_steps)) {
- stv0900_write_reg(i_params, R0900_P2_DMDISTATE, 0x5F);
- stv0900_write_bits(i_params, F0900_P2_I2C_DEMOD_MODE, 0x0);
-
- msleep(50);
- timingcpt = 0;
-
- for (i = 0; i < 20; i++) {
- if (stv0900_get_bits(i_params, F0900_P2_TMGLOCK_QUALITY) >= 2)
- timingcpt++;
- agc2_integr += (stv0900_read_reg(i_params, R0900_P2_AGC2I1) << 8)
- | stv0900_read_reg(i_params, R0900_P2_AGC2I0);
- }
-
- agc2_integr /= 20;
- coarse_srate = stv0900_get_symbol_rate(i_params, i_params->mclk, demod);
- if ((timingcpt >= 10) && (agc2_integr < 0x1F00) && (coarse_srate < 55000000) && (coarse_srate > 850000))
- timingLock = TRUE;
- else {
- current_step++;
- direction *= -1;
-
- if (direction > 0)
- tuner_freq += (current_step * currier_step);
- else
- tuner_freq -= (current_step * currier_step);
-
- stv0900_set_tuner(fe, tuner_freq, i_params->tuner2_bw);
- }
- }
-
- if (timingLock == FALSE)
- coarse_srate = 0;
- else
- coarse_srate = stv0900_get_symbol_rate(i_params, i_params->mclk, demod);
- break;
+ if (intp->chip_id >= 0x30) {
+ stv0900_write_reg(intp, CARFREQ, 0x99);
+ stv0900_write_reg(intp, SFRSTEP, 0x98);
+ } else if (intp->chip_id >= 0x20) {
+ stv0900_write_reg(intp, CARFREQ, 0x6a);
+ stv0900_write_reg(intp, SFRSTEP, 0x95);
+ } else {
+ stv0900_write_reg(intp, CARFREQ, 0xed);
+ stv0900_write_reg(intp, SFRSTEP, 0x73);
}
+ if (intp->symbol_rate[demod] <= 2000000)
+ currier_step = 1000;
+ else if (intp->symbol_rate[demod] <= 5000000)
+ currier_step = 2000;
+ else if (intp->symbol_rate[demod] <= 12000000)
+ currier_step = 3000;
+ else
+ currier_step = 5000;
+
+ nb_steps = -1 + ((intp->srch_range[demod] / 1000) / currier_step);
+ nb_steps /= 2;
+ nb_steps = (2 * nb_steps) + 1;
+
+ if (nb_steps < 0)
+ nb_steps = 1;
+ else if (nb_steps > 10) {
+ nb_steps = 11;
+ currier_step = (intp->srch_range[demod] / 1000) / 10;
+ }
+
+ current_step = 0;
+ direction = 1;
+
+ tuner_freq = intp->freq[demod];
+
+ while ((timing_lck == FALSE) && (current_step < nb_steps)) {
+ stv0900_write_reg(intp, DMDISTATE, 0x5f);
+ stv0900_write_bits(intp, DEMOD_MODE, 0);
+
+ msleep(50);
+
+ for (i = 0; i < 10; i++) {
+ if (stv0900_get_bits(intp, TMGLOCK_QUALITY) >= 2)
+ timingcpt++;
+
+ agc2_integr += (stv0900_read_reg(intp, AGC2I1) << 8) |
+ stv0900_read_reg(intp, AGC2I0);
+ }
+
+ agc2_integr /= 10;
+ coarse_srate = stv0900_get_symbol_rate(intp, intp->mclk, demod);
+ current_step++;
+ direction *= -1;
+
+ dprintk("lock: I2C_DEMOD_MODE_FIELD =0. Search started."
+ " tuner freq=%d agc2=0x%x srate_coarse=%d tmg_cpt=%d\n",
+ tuner_freq, agc2_integr, coarse_srate, timingcpt);
+
+ if ((timingcpt >= 5) &&
+ (agc2_integr < agc2_th) &&
+ (coarse_srate < 55000000) &&
+ (coarse_srate > 850000))
+ timing_lck = TRUE;
+ else if (current_step < nb_steps) {
+ if (direction > 0)
+ tuner_freq += (current_step * currier_step);
+ else
+ tuner_freq -= (current_step * currier_step);
+
+ stv0900_set_tuner(fe, tuner_freq, intp->bw[demod]);
+ }
+ }
+
+ if (timing_lck == FALSE)
+ coarse_srate = 0;
+ else
+ coarse_srate = stv0900_get_symbol_rate(intp, intp->mclk, demod);
+
return coarse_srate;
}
static u32 stv0900_search_srate_fine(struct dvb_frontend *fe)
{
struct stv0900_state *state = fe->demodulator_priv;
- struct stv0900_internal *i_params = state->internal;
+ struct stv0900_internal *intp = state->internal;
enum fe_stv0900_demod_num demod = state->demod;
- u32 coarse_srate,
- coarse_freq,
- symb;
+ u32 coarse_srate,
+ coarse_freq,
+ symb,
+ symbmax,
+ symbmin,
+ symbcomp;
- coarse_srate = stv0900_get_symbol_rate(i_params, i_params->mclk, demod);
+ coarse_srate = stv0900_get_symbol_rate(intp, intp->mclk, demod);
- switch (demod) {
- case STV0900_DEMOD_1:
- default:
- coarse_freq = (stv0900_read_reg(i_params, R0900_P1_CFR2) << 8)
- | stv0900_read_reg(i_params, R0900_P1_CFR1);
- symb = 13 * (coarse_srate / 10);
+ if (coarse_srate > 3000000) {
+ symbmax = 13 * (coarse_srate / 10);
+ symbmax = (symbmax / 1000) * 65536;
+ symbmax /= (intp->mclk / 1000);
- if (symb < i_params->dmd1_symbol_rate)
- coarse_srate = 0;
- else {
- stv0900_write_reg(i_params, R0900_P1_DMDISTATE, 0x1F);
- stv0900_write_reg(i_params, R0900_P1_TMGCFG2, 0x01);
- stv0900_write_reg(i_params, R0900_P1_TMGTHRISE, 0x20);
- stv0900_write_reg(i_params, R0900_P1_TMGTHFALL, 0x00);
- stv0900_write_reg(i_params, R0900_P1_TMGCFG, 0xd2);
- stv0900_write_bits(i_params, F0900_P1_CFR_AUTOSCAN, 0);
+ symbmin = 10 * (coarse_srate / 13);
+ symbmin = (symbmin / 1000)*65536;
+ symbmin /= (intp->mclk / 1000);
- if (i_params->chip_id >= 0x20)
- stv0900_write_reg(i_params, R0900_P1_CARFREQ, 0x49);
- else
- stv0900_write_reg(i_params, R0900_P1_CARFREQ, 0xed);
+ symb = (coarse_srate / 1000) * 65536;
+ symb /= (intp->mclk / 1000);
+ } else {
+ symbmax = 13 * (coarse_srate / 10);
+ symbmax = (symbmax / 100) * 65536;
+ symbmax /= (intp->mclk / 100);
- if (coarse_srate > 3000000) {
- symb = 13 * (coarse_srate / 10);
- symb = (symb / 1000) * 65536;
- symb /= (i_params->mclk / 1000);
- stv0900_write_reg(i_params, R0900_P1_SFRUP1, (symb >> 8) & 0x7F);
- stv0900_write_reg(i_params, R0900_P1_SFRUP0, (symb & 0xFF));
+ symbmin = 10 * (coarse_srate / 14);
+ symbmin = (symbmin / 100) * 65536;
+ symbmin /= (intp->mclk / 100);
- symb = 10 * (coarse_srate / 13);
- symb = (symb / 1000) * 65536;
- symb /= (i_params->mclk / 1000);
+ symb = (coarse_srate / 100) * 65536;
+ symb /= (intp->mclk / 100);
+ }
- stv0900_write_reg(i_params, R0900_P1_SFRLOW1, (symb >> 8) & 0x7F);
- stv0900_write_reg(i_params, R0900_P1_SFRLOW0, (symb & 0xFF));
+ symbcomp = 13 * (coarse_srate / 10);
+ coarse_freq = (stv0900_read_reg(intp, CFR2) << 8)
+ | stv0900_read_reg(intp, CFR1);
- symb = (coarse_srate / 1000) * 65536;
- symb /= (i_params->mclk / 1000);
- stv0900_write_reg(i_params, R0900_P1_SFRINIT1, (symb >> 8) & 0xFF);
- stv0900_write_reg(i_params, R0900_P1_SFRINIT0, (symb & 0xFF));
- } else {
- symb = 13 * (coarse_srate / 10);
- symb = (symb / 100) * 65536;
- symb /= (i_params->mclk / 100);
- stv0900_write_reg(i_params, R0900_P1_SFRUP1, (symb >> 8) & 0x7F);
- stv0900_write_reg(i_params, R0900_P1_SFRUP0, (symb & 0xFF));
+ if (symbcomp < intp->symbol_rate[demod])
+ coarse_srate = 0;
+ else {
+ stv0900_write_reg(intp, DMDISTATE, 0x1f);
+ stv0900_write_reg(intp, TMGCFG2, 0xc1);
+ stv0900_write_reg(intp, TMGTHRISE, 0x20);
+ stv0900_write_reg(intp, TMGTHFALL, 0x00);
+ stv0900_write_reg(intp, TMGCFG, 0xd2);
+ stv0900_write_bits(intp, CFR_AUTOSCAN, 0);
+ stv0900_write_reg(intp, AGC2REF, 0x38);
- symb = 10 * (coarse_srate / 14);
- symb = (symb / 100) * 65536;
- symb /= (i_params->mclk / 100);
- stv0900_write_reg(i_params, R0900_P1_SFRLOW1, (symb >> 8) & 0x7F);
- stv0900_write_reg(i_params, R0900_P1_SFRLOW0, (symb & 0xFF));
+ if (intp->chip_id >= 0x30)
+ stv0900_write_reg(intp, CARFREQ, 0x79);
+ else if (intp->chip_id >= 0x20)
+ stv0900_write_reg(intp, CARFREQ, 0x49);
+ else
+ stv0900_write_reg(intp, CARFREQ, 0xed);
- symb = (coarse_srate / 100) * 65536;
- symb /= (i_params->mclk / 100);
- stv0900_write_reg(i_params, R0900_P1_SFRINIT1, (symb >> 8) & 0xFF);
- stv0900_write_reg(i_params, R0900_P1_SFRINIT0, (symb & 0xFF));
- }
+ stv0900_write_reg(intp, SFRUP1, (symbmax >> 8) & 0x7f);
+ stv0900_write_reg(intp, SFRUP0, (symbmax & 0xff));
- stv0900_write_reg(i_params, R0900_P1_DMDT0M, 0x20);
- stv0900_write_reg(i_params, R0900_P1_CFRINIT1, (coarse_freq >> 8) & 0xff);
- stv0900_write_reg(i_params, R0900_P1_CFRINIT0, coarse_freq & 0xff);
- stv0900_write_reg(i_params, R0900_P1_DMDISTATE, 0x15);
- }
- break;
- case STV0900_DEMOD_2:
- coarse_freq = (stv0900_read_reg(i_params, R0900_P2_CFR2) << 8)
- | stv0900_read_reg(i_params, R0900_P2_CFR1);
+ stv0900_write_reg(intp, SFRLOW1, (symbmin >> 8) & 0x7f);
+ stv0900_write_reg(intp, SFRLOW0, (symbmin & 0xff));
- symb = 13 * (coarse_srate / 10);
+ stv0900_write_reg(intp, SFRINIT1, (symb >> 8) & 0xff);
+ stv0900_write_reg(intp, SFRINIT0, (symb & 0xff));
- if (symb < i_params->dmd2_symbol_rate)
- coarse_srate = 0;
- else {
- stv0900_write_reg(i_params, R0900_P2_DMDISTATE, 0x1F);
- stv0900_write_reg(i_params, R0900_P2_TMGCFG2, 0x01);
- stv0900_write_reg(i_params, R0900_P2_TMGTHRISE, 0x20);
- stv0900_write_reg(i_params, R0900_P2_TMGTHFALL, 0x00);
- stv0900_write_reg(i_params, R0900_P2_TMGCFG, 0xd2);
- stv0900_write_bits(i_params, F0900_P2_CFR_AUTOSCAN, 0);
-
- if (i_params->chip_id >= 0x20)
- stv0900_write_reg(i_params, R0900_P2_CARFREQ, 0x49);
- else
- stv0900_write_reg(i_params, R0900_P2_CARFREQ, 0xed);
-
- if (coarse_srate > 3000000) {
- symb = 13 * (coarse_srate / 10);
- symb = (symb / 1000) * 65536;
- symb /= (i_params->mclk / 1000);
- stv0900_write_reg(i_params, R0900_P2_SFRUP1, (symb >> 8) & 0x7F);
- stv0900_write_reg(i_params, R0900_P2_SFRUP0, (symb & 0xFF));
-
- symb = 10 * (coarse_srate / 13);
- symb = (symb / 1000) * 65536;
- symb /= (i_params->mclk / 1000);
-
- stv0900_write_reg(i_params, R0900_P2_SFRLOW1, (symb >> 8) & 0x7F);
- stv0900_write_reg(i_params, R0900_P2_SFRLOW0, (symb & 0xFF));
-
- symb = (coarse_srate / 1000) * 65536;
- symb /= (i_params->mclk / 1000);
- stv0900_write_reg(i_params, R0900_P2_SFRINIT1, (symb >> 8) & 0xFF);
- stv0900_write_reg(i_params, R0900_P2_SFRINIT0, (symb & 0xFF));
- } else {
- symb = 13 * (coarse_srate / 10);
- symb = (symb / 100) * 65536;
- symb /= (i_params->mclk / 100);
- stv0900_write_reg(i_params, R0900_P2_SFRUP1, (symb >> 8) & 0x7F);
- stv0900_write_reg(i_params, R0900_P2_SFRUP0, (symb & 0xFF));
-
- symb = 10 * (coarse_srate / 14);
- symb = (symb / 100) * 65536;
- symb /= (i_params->mclk / 100);
- stv0900_write_reg(i_params, R0900_P2_SFRLOW1, (symb >> 8) & 0x7F);
- stv0900_write_reg(i_params, R0900_P2_SFRLOW0, (symb & 0xFF));
-
- symb = (coarse_srate / 100) * 65536;
- symb /= (i_params->mclk / 100);
- stv0900_write_reg(i_params, R0900_P2_SFRINIT1, (symb >> 8) & 0xFF);
- stv0900_write_reg(i_params, R0900_P2_SFRINIT0, (symb & 0xFF));
- }
-
- stv0900_write_reg(i_params, R0900_P2_DMDT0M, 0x20);
- stv0900_write_reg(i_params, R0900_P2_CFRINIT1, (coarse_freq >> 8) & 0xff);
- stv0900_write_reg(i_params, R0900_P2_CFRINIT0, coarse_freq & 0xff);
- stv0900_write_reg(i_params, R0900_P2_DMDISTATE, 0x15);
- }
-
- break;
+ stv0900_write_reg(intp, DMDT0M, 0x20);
+ stv0900_write_reg(intp, CFRINIT1, (coarse_freq >> 8) & 0xff);
+ stv0900_write_reg(intp, CFRINIT0, coarse_freq & 0xff);
+ stv0900_write_reg(intp, DMDISTATE, 0x15);
}
return coarse_srate;
@@ -2265,163 +1574,135 @@
static int stv0900_blind_search_algo(struct dvb_frontend *fe)
{
struct stv0900_state *state = fe->demodulator_priv;
- struct stv0900_internal *i_params = state->internal;
+ struct stv0900_internal *intp = state->internal;
enum fe_stv0900_demod_num demod = state->demod;
- u8 k_ref_tmg, k_ref_tmg_max, k_ref_tmg_min;
- u32 coarse_srate;
- int lock = FALSE, coarse_fail = FALSE;
- s32 demod_timeout = 500, fec_timeout = 50, kref_tmg_reg, fail_cpt, i, agc2_overflow;
- u16 agc2_integr;
- u8 dstatus2;
+ u8 k_ref_tmg,
+ k_ref_tmg_max,
+ k_ref_tmg_min;
+ u32 coarse_srate,
+ agc2_th;
+ int lock = FALSE,
+ coarse_fail = FALSE;
+ s32 demod_timeout = 500,
+ fec_timeout = 50,
+ fail_cpt,
+ i,
+ agc2_overflow;
+ u16 agc2_int;
+ u8 dstatus2;
- dprintk(KERN_INFO "%s\n", __func__);
+ dprintk("%s\n", __func__);
- if (i_params->chip_id < 0x20) {
+ if (intp->chip_id < 0x20) {
k_ref_tmg_max = 233;
k_ref_tmg_min = 143;
} else {
- k_ref_tmg_max = 120;
- k_ref_tmg_min = 30;
+ k_ref_tmg_max = 110;
+ k_ref_tmg_min = 10;
}
- agc2_integr = stv0900_blind_check_agc2_min_level(i_params, demod);
+ if (intp->chip_id <= 0x20)
+ agc2_th = STV0900_BLIND_SEARCH_AGC2_TH;
+ else
+ agc2_th = STV0900_BLIND_SEARCH_AGC2_TH_CUT30;
- if (agc2_integr > STV0900_BLIND_SEARCH_AGC2_TH) {
- lock = FALSE;
+ agc2_int = stv0900_blind_check_agc2_min_level(intp, demod);
- } else {
- switch (demod) {
- case STV0900_DEMOD_1:
- default:
- if (i_params->chip_id == 0x10)
- stv0900_write_reg(i_params, R0900_P1_CORRELEXP, 0xAA);
+ if (agc2_int > STV0900_BLIND_SEARCH_AGC2_TH)
+ return FALSE;
- if (i_params->chip_id < 0x20)
- stv0900_write_reg(i_params, R0900_P1_CARHDR, 0x55);
+ if (intp->chip_id == 0x10)
+ stv0900_write_reg(intp, CORRELEXP, 0xaa);
- stv0900_write_reg(i_params, R0900_P1_CARCFG, 0xC4);
- stv0900_write_reg(i_params, R0900_P1_RTCS2, 0x44);
+ if (intp->chip_id < 0x20)
+ stv0900_write_reg(intp, CARHDR, 0x55);
+ else
+ stv0900_write_reg(intp, CARHDR, 0x20);
- if (i_params->chip_id >= 0x20) {
- stv0900_write_reg(i_params, R0900_P1_EQUALCFG, 0x41);
- stv0900_write_reg(i_params, R0900_P1_FFECFG, 0x41);
- stv0900_write_reg(i_params, R0900_P1_VITSCALE, 0x82);
- stv0900_write_reg(i_params, R0900_P1_VAVSRVIT, 0x0);
- }
+ if (intp->chip_id <= 0x20)
+ stv0900_write_reg(intp, CARCFG, 0xc4);
+ else
+ stv0900_write_reg(intp, CARCFG, 0x6);
- kref_tmg_reg = R0900_P1_KREFTMG;
- break;
- case STV0900_DEMOD_2:
- if (i_params->chip_id == 0x10)
- stv0900_write_reg(i_params, R0900_P2_CORRELEXP, 0xAA);
+ stv0900_write_reg(intp, RTCS2, 0x44);
- if (i_params->chip_id < 0x20)
- stv0900_write_reg(i_params, R0900_P2_CARHDR, 0x55);
+ if (intp->chip_id >= 0x20) {
+ stv0900_write_reg(intp, EQUALCFG, 0x41);
+ stv0900_write_reg(intp, FFECFG, 0x41);
+ stv0900_write_reg(intp, VITSCALE, 0x82);
+ stv0900_write_reg(intp, VAVSRVIT, 0x0);
+ }
- stv0900_write_reg(i_params, R0900_P2_CARCFG, 0xC4);
- stv0900_write_reg(i_params, R0900_P2_RTCS2, 0x44);
+ k_ref_tmg = k_ref_tmg_max;
- if (i_params->chip_id >= 0x20) {
- stv0900_write_reg(i_params, R0900_P2_EQUALCFG, 0x41);
- stv0900_write_reg(i_params, R0900_P2_FFECFG, 0x41);
- stv0900_write_reg(i_params, R0900_P2_VITSCALE, 0x82);
- stv0900_write_reg(i_params, R0900_P2_VAVSRVIT, 0x0);
- }
+ do {
+ stv0900_write_reg(intp, KREFTMG, k_ref_tmg);
+ if (stv0900_search_srate_coarse(fe) != 0) {
+ coarse_srate = stv0900_search_srate_fine(fe);
- kref_tmg_reg = R0900_P2_KREFTMG;
- break;
- }
-
- k_ref_tmg = k_ref_tmg_max;
-
- do {
- stv0900_write_reg(i_params, kref_tmg_reg, k_ref_tmg);
- if (stv0900_search_srate_coarse(fe) != 0) {
- coarse_srate = stv0900_search_srate_fine(fe);
-
- if (coarse_srate != 0) {
- stv0900_get_lock_timeout(&demod_timeout, &fec_timeout, coarse_srate, STV0900_BLIND_SEARCH);
- lock = stv0900_get_demod_lock(i_params, demod, demod_timeout);
- } else
- lock = FALSE;
- } else {
- fail_cpt = 0;
- agc2_overflow = 0;
-
- switch (demod) {
- case STV0900_DEMOD_1:
- default:
- for (i = 0; i < 10; i++) {
- agc2_integr = (stv0900_read_reg(i_params, R0900_P1_AGC2I1) << 8)
- | stv0900_read_reg(i_params, R0900_P1_AGC2I0);
-
- if (agc2_integr >= 0xff00)
- agc2_overflow++;
-
- dstatus2 = stv0900_read_reg(i_params, R0900_P1_DSTATUS2);
-
- if (((dstatus2 & 0x1) == 0x1) && ((dstatus2 >> 7) == 1))
- fail_cpt++;
- }
- break;
- case STV0900_DEMOD_2:
- for (i = 0; i < 10; i++) {
- agc2_integr = (stv0900_read_reg(i_params, R0900_P2_AGC2I1) << 8)
- | stv0900_read_reg(i_params, R0900_P2_AGC2I0);
-
- if (agc2_integr >= 0xff00)
- agc2_overflow++;
-
- dstatus2 = stv0900_read_reg(i_params, R0900_P2_DSTATUS2);
-
- if (((dstatus2 & 0x1) == 0x1) && ((dstatus2 >> 7) == 1))
- fail_cpt++;
- }
- break;
- }
-
- if ((fail_cpt > 7) || (agc2_overflow > 7))
- coarse_fail = TRUE;
-
+ if (coarse_srate != 0) {
+ stv0900_get_lock_timeout(&demod_timeout,
+ &fec_timeout,
+ coarse_srate,
+ STV0900_BLIND_SEARCH);
+ lock = stv0900_get_demod_lock(intp,
+ demod,
+ demod_timeout);
+ } else
lock = FALSE;
+ } else {
+ fail_cpt = 0;
+ agc2_overflow = 0;
+
+ for (i = 0; i < 10; i++) {
+ agc2_int = (stv0900_read_reg(intp, AGC2I1) << 8)
+ | stv0900_read_reg(intp, AGC2I0);
+
+ if (agc2_int >= 0xff00)
+ agc2_overflow++;
+
+ dstatus2 = stv0900_read_reg(intp, DSTATUS2);
+
+ if (((dstatus2 & 0x1) == 0x1) &&
+ ((dstatus2 >> 7) == 1))
+ fail_cpt++;
}
- k_ref_tmg -= 30;
- } while ((k_ref_tmg >= k_ref_tmg_min) && (lock == FALSE) && (coarse_fail == FALSE));
- }
+
+ if ((fail_cpt > 7) || (agc2_overflow > 7))
+ coarse_fail = TRUE;
+
+ lock = FALSE;
+ }
+ k_ref_tmg -= 30;
+ } while ((k_ref_tmg >= k_ref_tmg_min) &&
+ (lock == FALSE) &&
+ (coarse_fail == FALSE));
return lock;
}
-static void stv0900_set_viterbi_acq(struct stv0900_internal *i_params,
+static void stv0900_set_viterbi_acq(struct stv0900_internal *intp,
enum fe_stv0900_demod_num demod)
{
- s32 vth_reg;
+ s32 vth_reg = VTH12;
- dprintk(KERN_INFO "%s\n", __func__);
+ dprintk("%s\n", __func__);
- dmd_reg(vth_reg, R0900_P1_VTH12, R0900_P2_VTH12);
-
- stv0900_write_reg(i_params, vth_reg++, 0x96);
- stv0900_write_reg(i_params, vth_reg++, 0x64);
- stv0900_write_reg(i_params, vth_reg++, 0x36);
- stv0900_write_reg(i_params, vth_reg++, 0x23);
- stv0900_write_reg(i_params, vth_reg++, 0x1E);
- stv0900_write_reg(i_params, vth_reg++, 0x19);
+ stv0900_write_reg(intp, vth_reg++, 0x96);
+ stv0900_write_reg(intp, vth_reg++, 0x64);
+ stv0900_write_reg(intp, vth_reg++, 0x36);
+ stv0900_write_reg(intp, vth_reg++, 0x23);
+ stv0900_write_reg(intp, vth_reg++, 0x1e);
+ stv0900_write_reg(intp, vth_reg++, 0x19);
}
-static void stv0900_set_search_standard(struct stv0900_internal *i_params,
+static void stv0900_set_search_standard(struct stv0900_internal *intp,
enum fe_stv0900_demod_num demod)
{
- int sstndrd;
+ dprintk("%s\n", __func__);
- dprintk(KERN_INFO "%s\n", __func__);
-
- sstndrd = i_params->dmd1_srch_standard;
- if (demod == 1)
- sstndrd = i_params->dmd2_srch_stndrd;
-
- switch (sstndrd) {
+ switch (intp->srch_standard[demod]) {
case STV0900_SEARCH_DVBS1:
dprintk("Search Standard = DVBS1\n");
break;
@@ -2436,129 +1717,74 @@
break;
}
- switch (demod) {
- case STV0900_DEMOD_1:
- default:
- switch (i_params->dmd1_srch_standard) {
- case STV0900_SEARCH_DVBS1:
- case STV0900_SEARCH_DSS:
- stv0900_write_bits(i_params, F0900_P1_DVBS1_ENABLE, 1);
- stv0900_write_bits(i_params, F0900_P1_DVBS2_ENABLE, 0);
+ switch (intp->srch_standard[demod]) {
+ case STV0900_SEARCH_DVBS1:
+ case STV0900_SEARCH_DSS:
+ stv0900_write_bits(intp, DVBS1_ENABLE, 1);
+ stv0900_write_bits(intp, DVBS2_ENABLE, 0);
+ stv0900_write_bits(intp, STOP_CLKVIT, 0);
+ stv0900_set_dvbs1_track_car_loop(intp,
+ demod,
+ intp->symbol_rate[demod]);
+ stv0900_write_reg(intp, CAR2CFG, 0x22);
- stv0900_write_bits(i_params, F0900_STOP_CLKVIT1, 0);
- stv0900_write_reg(i_params, R0900_P1_ACLC, 0x1a);
- stv0900_write_reg(i_params, R0900_P1_BCLC, 0x09);
- stv0900_write_reg(i_params, R0900_P1_CAR2CFG, 0x22);
+ stv0900_set_viterbi_acq(intp, demod);
+ stv0900_set_viterbi_standard(intp,
+ intp->srch_standard[demod],
+ intp->fec[demod], demod);
- stv0900_set_viterbi_acq(i_params, demod);
- stv0900_set_viterbi_standard(i_params,
- i_params->dmd1_srch_standard,
- i_params->dmd1_fec, demod);
-
- break;
- case STV0900_SEARCH_DVBS2:
- stv0900_write_bits(i_params, F0900_P1_DVBS1_ENABLE, 0);
- stv0900_write_bits(i_params, F0900_P1_DVBS2_ENABLE, 0);
- stv0900_write_bits(i_params, F0900_P1_DVBS1_ENABLE, 1);
- stv0900_write_bits(i_params, F0900_P1_DVBS2_ENABLE, 1);
- stv0900_write_bits(i_params, F0900_STOP_CLKVIT1, 1);
- stv0900_write_reg(i_params, R0900_P1_ACLC, 0x1a);
- stv0900_write_reg(i_params, R0900_P1_BCLC, 0x09);
- stv0900_write_reg(i_params, R0900_P1_CAR2CFG, 0x26);
- if (i_params->demod_mode != STV0900_SINGLE) {
- if (i_params->chip_id <= 0x11)
- stv0900_stop_all_s2_modcod(i_params, demod);
- else
- stv0900_activate_s2_modcode(i_params, demod);
-
- } else
- stv0900_activate_s2_modcode_single(i_params, demod);
-
- stv0900_set_viterbi_tracq(i_params, demod);
-
- break;
- case STV0900_AUTO_SEARCH:
- default:
- stv0900_write_bits(i_params, F0900_P1_DVBS1_ENABLE, 0);
- stv0900_write_bits(i_params, F0900_P1_DVBS2_ENABLE, 0);
- stv0900_write_bits(i_params, F0900_P1_DVBS1_ENABLE, 1);
- stv0900_write_bits(i_params, F0900_P1_DVBS2_ENABLE, 1);
- stv0900_write_bits(i_params, F0900_STOP_CLKVIT1, 0);
- stv0900_write_reg(i_params, R0900_P1_ACLC, 0x1a);
- stv0900_write_reg(i_params, R0900_P1_BCLC, 0x09);
- stv0900_write_reg(i_params, R0900_P1_CAR2CFG, 0x26);
- if (i_params->demod_mode != STV0900_SINGLE) {
- if (i_params->chip_id <= 0x11)
- stv0900_stop_all_s2_modcod(i_params, demod);
- else
- stv0900_activate_s2_modcode(i_params, demod);
-
- } else
- stv0900_activate_s2_modcode_single(i_params, demod);
-
- if (i_params->dmd1_symbol_rate >= 2000000)
- stv0900_set_viterbi_acq(i_params, demod);
- else
- stv0900_set_viterbi_tracq(i_params, demod);
-
- stv0900_set_viterbi_standard(i_params, i_params->dmd1_srch_standard, i_params->dmd1_fec, demod);
-
- break;
- }
break;
- case STV0900_DEMOD_2:
- switch (i_params->dmd2_srch_stndrd) {
- case STV0900_SEARCH_DVBS1:
- case STV0900_SEARCH_DSS:
- stv0900_write_bits(i_params, F0900_P2_DVBS1_ENABLE, 1);
- stv0900_write_bits(i_params, F0900_P2_DVBS2_ENABLE, 0);
- stv0900_write_bits(i_params, F0900_STOP_CLKVIT2, 0);
- stv0900_write_reg(i_params, R0900_P2_ACLC, 0x1a);
- stv0900_write_reg(i_params, R0900_P2_BCLC, 0x09);
- stv0900_write_reg(i_params, R0900_P2_CAR2CFG, 0x22);
- stv0900_set_viterbi_acq(i_params, demod);
- stv0900_set_viterbi_standard(i_params, i_params->dmd2_srch_stndrd, i_params->dmd2_fec, demod);
- break;
- case STV0900_SEARCH_DVBS2:
- stv0900_write_bits(i_params, F0900_P2_DVBS1_ENABLE, 0);
- stv0900_write_bits(i_params, F0900_P2_DVBS2_ENABLE, 0);
- stv0900_write_bits(i_params, F0900_P2_DVBS1_ENABLE, 1);
- stv0900_write_bits(i_params, F0900_P2_DVBS2_ENABLE, 1);
- stv0900_write_bits(i_params, F0900_STOP_CLKVIT2, 1);
- stv0900_write_reg(i_params, R0900_P2_ACLC, 0x1a);
- stv0900_write_reg(i_params, R0900_P2_BCLC, 0x09);
- stv0900_write_reg(i_params, R0900_P2_CAR2CFG, 0x26);
- if (i_params->demod_mode != STV0900_SINGLE)
- stv0900_activate_s2_modcode(i_params, demod);
+ case STV0900_SEARCH_DVBS2:
+ stv0900_write_bits(intp, DVBS1_ENABLE, 0);
+ stv0900_write_bits(intp, DVBS2_ENABLE, 1);
+ stv0900_write_bits(intp, STOP_CLKVIT, 1);
+ stv0900_write_reg(intp, ACLC, 0x1a);
+ stv0900_write_reg(intp, BCLC, 0x09);
+ if (intp->chip_id <= 0x20) /*cut 1.x and 2.0*/
+ stv0900_write_reg(intp, CAR2CFG, 0x26);
+ else
+ stv0900_write_reg(intp, CAR2CFG, 0x66);
+
+ if (intp->demod_mode != STV0900_SINGLE) {
+ if (intp->chip_id <= 0x11)
+ stv0900_stop_all_s2_modcod(intp, demod);
else
- stv0900_activate_s2_modcode_single(i_params, demod);
+ stv0900_activate_s2_modcod(intp, demod);
- stv0900_set_viterbi_tracq(i_params, demod);
- break;
- case STV0900_AUTO_SEARCH:
- default:
- stv0900_write_bits(i_params, F0900_P2_DVBS1_ENABLE, 0);
- stv0900_write_bits(i_params, F0900_P2_DVBS2_ENABLE, 0);
- stv0900_write_bits(i_params, F0900_P2_DVBS1_ENABLE, 1);
- stv0900_write_bits(i_params, F0900_P2_DVBS2_ENABLE, 1);
- stv0900_write_bits(i_params, F0900_STOP_CLKVIT2, 0);
- stv0900_write_reg(i_params, R0900_P2_ACLC, 0x1a);
- stv0900_write_reg(i_params, R0900_P2_BCLC, 0x09);
- stv0900_write_reg(i_params, R0900_P2_CAR2CFG, 0x26);
- if (i_params->demod_mode != STV0900_SINGLE)
- stv0900_activate_s2_modcode(i_params, demod);
+ } else
+ stv0900_activate_s2_modcod_single(intp, demod);
+
+ stv0900_set_viterbi_tracq(intp, demod);
+
+ break;
+ case STV0900_AUTO_SEARCH:
+ default:
+ stv0900_write_bits(intp, DVBS1_ENABLE, 1);
+ stv0900_write_bits(intp, DVBS2_ENABLE, 1);
+ stv0900_write_bits(intp, STOP_CLKVIT, 0);
+ stv0900_write_reg(intp, ACLC, 0x1a);
+ stv0900_write_reg(intp, BCLC, 0x09);
+ stv0900_set_dvbs1_track_car_loop(intp,
+ demod,
+ intp->symbol_rate[demod]);
+ if (intp->chip_id <= 0x20) /*cut 1.x and 2.0*/
+ stv0900_write_reg(intp, CAR2CFG, 0x26);
+ else
+ stv0900_write_reg(intp, CAR2CFG, 0x66);
+
+ if (intp->demod_mode != STV0900_SINGLE) {
+ if (intp->chip_id <= 0x11)
+ stv0900_stop_all_s2_modcod(intp, demod);
else
- stv0900_activate_s2_modcode_single(i_params, demod);
+ stv0900_activate_s2_modcod(intp, demod);
- if (i_params->dmd2_symbol_rate >= 2000000)
- stv0900_set_viterbi_acq(i_params, demod);
- else
- stv0900_set_viterbi_tracq(i_params, demod);
+ } else
+ stv0900_activate_s2_modcod_single(intp, demod);
- stv0900_set_viterbi_standard(i_params, i_params->dmd2_srch_stndrd, i_params->dmd2_fec, demod);
-
- break;
- }
+ stv0900_set_viterbi_tracq(intp, demod);
+ stv0900_set_viterbi_standard(intp,
+ intp->srch_standard[demod],
+ intp->fec[demod], demod);
break;
}
@@ -2567,10 +1793,11 @@
enum fe_stv0900_signal_type stv0900_algo(struct dvb_frontend *fe)
{
struct stv0900_state *state = fe->demodulator_priv;
- struct stv0900_internal *i_params = state->internal;
+ struct stv0900_internal *intp = state->internal;
enum fe_stv0900_demod_num demod = state->demod;
- s32 demod_timeout = 500, fec_timeout = 50, stream_merger_field;
+ s32 demod_timeout = 500, fec_timeout = 50;
+ s32 aq_power, agc1_power, i;
int lock = FALSE, low_sr = FALSE;
@@ -2578,157 +1805,117 @@
enum fe_stv0900_search_algo algo;
int no_signal = FALSE;
- dprintk(KERN_INFO "%s\n", __func__);
+ dprintk("%s\n", __func__);
- switch (demod) {
- case STV0900_DEMOD_1:
- default:
- algo = i_params->dmd1_srch_algo;
-
- stv0900_write_bits(i_params, F0900_P1_RST_HWARE, 1);
- stream_merger_field = F0900_P1_RST_HWARE;
-
- stv0900_write_reg(i_params, R0900_P1_DMDISTATE, 0x5C);
-
- if (i_params->chip_id >= 0x20)
- stv0900_write_reg(i_params, R0900_P1_CORRELABS, 0x9e);
+ algo = intp->srch_algo[demod];
+ stv0900_write_bits(intp, RST_HWARE, 1);
+ stv0900_write_reg(intp, DMDISTATE, 0x5c);
+ if (intp->chip_id >= 0x20) {
+ if (intp->symbol_rate[demod] > 5000000)
+ stv0900_write_reg(intp, CORRELABS, 0x9e);
else
- stv0900_write_reg(i_params, R0900_P1_CORRELABS, 0x88);
+ stv0900_write_reg(intp, CORRELABS, 0x82);
+ } else
+ stv0900_write_reg(intp, CORRELABS, 0x88);
- stv0900_get_lock_timeout(&demod_timeout, &fec_timeout, i_params->dmd1_symbol_rate, i_params->dmd1_srch_algo);
+ stv0900_get_lock_timeout(&demod_timeout, &fec_timeout,
+ intp->symbol_rate[demod],
+ intp->srch_algo[demod]);
- if (i_params->dmd1_srch_algo == STV0900_BLIND_SEARCH) {
- i_params->tuner1_bw = 2 * 36000000;
+ if (intp->srch_algo[demod] == STV0900_BLIND_SEARCH) {
+ intp->bw[demod] = 2 * 36000000;
- stv0900_write_reg(i_params, R0900_P1_TMGCFG2, 0x00);
- stv0900_write_reg(i_params, R0900_P1_CORRELMANT, 0x70);
+ stv0900_write_reg(intp, TMGCFG2, 0xc0);
+ stv0900_write_reg(intp, CORRELMANT, 0x70);
- stv0900_set_symbol_rate(i_params, i_params->mclk, 1000000, demod);
+ stv0900_set_symbol_rate(intp, intp->mclk, 1000000, demod);
+ } else {
+ stv0900_write_reg(intp, DMDT0M, 0x20);
+ stv0900_write_reg(intp, TMGCFG, 0xd2);
+
+ if (intp->symbol_rate[demod] < 2000000)
+ stv0900_write_reg(intp, CORRELMANT, 0x63);
+ else
+ stv0900_write_reg(intp, CORRELMANT, 0x70);
+
+ stv0900_write_reg(intp, AGC2REF, 0x38);
+
+ intp->bw[demod] =
+ stv0900_carrier_width(intp->symbol_rate[demod],
+ intp->rolloff);
+ if (intp->chip_id >= 0x20) {
+ stv0900_write_reg(intp, KREFTMG, 0x5a);
+
+ if (intp->srch_algo[demod] == STV0900_COLD_START) {
+ intp->bw[demod] += 10000000;
+ intp->bw[demod] *= 15;
+ intp->bw[demod] /= 10;
+ } else if (intp->srch_algo[demod] == STV0900_WARM_START)
+ intp->bw[demod] += 10000000;
+
} else {
- stv0900_write_reg(i_params, R0900_P1_DMDT0M, 0x20);
- stv0900_write_reg(i_params, R0900_P1_TMGCFG, 0xd2);
-
- if (i_params->dmd1_symbol_rate < 2000000)
- stv0900_write_reg(i_params, R0900_P1_CORRELMANT, 0x63);
- else
- stv0900_write_reg(i_params, R0900_P1_CORRELMANT, 0x70);
-
- stv0900_write_reg(i_params, R0900_P1_AGC2REF, 0x38);
- if (i_params->chip_id >= 0x20) {
- stv0900_write_reg(i_params, R0900_P1_KREFTMG, 0x5a);
-
- if (i_params->dmd1_srch_algo == STV0900_COLD_START)
- i_params->tuner1_bw = (15 * (stv0900_carrier_width(i_params->dmd1_symbol_rate, i_params->rolloff) + 10000000)) / 10;
- else if (i_params->dmd1_srch_algo == STV0900_WARM_START)
- i_params->tuner1_bw = stv0900_carrier_width(i_params->dmd1_symbol_rate, i_params->rolloff) + 10000000;
- } else {
- stv0900_write_reg(i_params, R0900_P1_KREFTMG, 0xc1);
- i_params->tuner1_bw = (15 * (stv0900_carrier_width(i_params->dmd1_symbol_rate, i_params->rolloff) + 10000000)) / 10;
- }
-
- stv0900_write_reg(i_params, R0900_P1_TMGCFG2, 0x01);
-
- stv0900_set_symbol_rate(i_params, i_params->mclk, i_params->dmd1_symbol_rate, demod);
- stv0900_set_max_symbol_rate(i_params, i_params->mclk, i_params->dmd1_symbol_rate, demod);
- stv0900_set_min_symbol_rate(i_params, i_params->mclk, i_params->dmd1_symbol_rate, demod);
- if (i_params->dmd1_symbol_rate >= 10000000)
- low_sr = FALSE;
- else
- low_sr = TRUE;
-
+ stv0900_write_reg(intp, KREFTMG, 0xc1);
+ intp->bw[demod] += 10000000;
+ intp->bw[demod] *= 15;
+ intp->bw[demod] /= 10;
}
- stv0900_set_tuner(fe, i_params->tuner1_freq, i_params->tuner1_bw);
+ stv0900_write_reg(intp, TMGCFG2, 0xc1);
- stv0900_write_bits(i_params, F0900_P1_SPECINV_CONTROL, i_params->dmd1_srch_iq_inv);
- stv0900_write_bits(i_params, F0900_P1_MANUAL_ROLLOFF, 1);
-
- stv0900_set_search_standard(i_params, demod);
-
- if (i_params->dmd1_srch_algo != STV0900_BLIND_SEARCH)
- stv0900_start_search(i_params, demod);
- break;
- case STV0900_DEMOD_2:
- algo = i_params->dmd2_srch_algo;
-
- stv0900_write_bits(i_params, F0900_P2_RST_HWARE, 1);
-
- stream_merger_field = F0900_P2_RST_HWARE;
-
- stv0900_write_reg(i_params, R0900_P2_DMDISTATE, 0x5C);
-
- if (i_params->chip_id >= 0x20)
- stv0900_write_reg(i_params, R0900_P2_CORRELABS, 0x9e);
+ stv0900_set_symbol_rate(intp, intp->mclk,
+ intp->symbol_rate[demod], demod);
+ stv0900_set_max_symbol_rate(intp, intp->mclk,
+ intp->symbol_rate[demod], demod);
+ stv0900_set_min_symbol_rate(intp, intp->mclk,
+ intp->symbol_rate[demod], demod);
+ if (intp->symbol_rate[demod] >= 10000000)
+ low_sr = FALSE;
else
- stv0900_write_reg(i_params, R0900_P2_CORRELABS, 0x88);
+ low_sr = TRUE;
- stv0900_get_lock_timeout(&demod_timeout, &fec_timeout, i_params->dmd2_symbol_rate, i_params->dmd2_srch_algo);
-
- if (i_params->dmd2_srch_algo == STV0900_BLIND_SEARCH) {
- i_params->tuner2_bw = 2 * 36000000;
-
- stv0900_write_reg(i_params, R0900_P2_TMGCFG2, 0x00);
- stv0900_write_reg(i_params, R0900_P2_CORRELMANT, 0x70);
-
- stv0900_set_symbol_rate(i_params, i_params->mclk, 1000000, demod);
- } else {
- stv0900_write_reg(i_params, R0900_P2_DMDT0M, 0x20);
- stv0900_write_reg(i_params, R0900_P2_TMGCFG, 0xd2);
-
- if (i_params->dmd2_symbol_rate < 2000000)
- stv0900_write_reg(i_params, R0900_P2_CORRELMANT, 0x63);
- else
- stv0900_write_reg(i_params, R0900_P2_CORRELMANT, 0x70);
-
- if (i_params->dmd2_symbol_rate >= 10000000)
- stv0900_write_reg(i_params, R0900_P2_AGC2REF, 0x38);
- else
- stv0900_write_reg(i_params, R0900_P2_AGC2REF, 0x60);
-
- if (i_params->chip_id >= 0x20) {
- stv0900_write_reg(i_params, R0900_P2_KREFTMG, 0x5a);
-
- if (i_params->dmd2_srch_algo == STV0900_COLD_START)
- i_params->tuner2_bw = (15 * (stv0900_carrier_width(i_params->dmd2_symbol_rate,
- i_params->rolloff) + 10000000)) / 10;
- else if (i_params->dmd2_srch_algo == STV0900_WARM_START)
- i_params->tuner2_bw = stv0900_carrier_width(i_params->dmd2_symbol_rate,
- i_params->rolloff) + 10000000;
- } else {
- stv0900_write_reg(i_params, R0900_P2_KREFTMG, 0xc1);
- i_params->tuner2_bw = (15 * (stv0900_carrier_width(i_params->dmd2_symbol_rate,
- i_params->rolloff) + 10000000)) / 10;
- }
-
- stv0900_write_reg(i_params, R0900_P2_TMGCFG2, 0x01);
-
- stv0900_set_symbol_rate(i_params, i_params->mclk, i_params->dmd2_symbol_rate, demod);
- stv0900_set_max_symbol_rate(i_params, i_params->mclk, i_params->dmd2_symbol_rate, demod);
- stv0900_set_min_symbol_rate(i_params, i_params->mclk, i_params->dmd2_symbol_rate, demod);
- if (i_params->dmd2_symbol_rate >= 10000000)
- low_sr = FALSE;
- else
- low_sr = TRUE;
-
- }
-
- stv0900_set_tuner(fe, i_params->tuner2_freq, i_params->tuner2_bw);
-
- stv0900_write_bits(i_params, F0900_P2_SPECINV_CONTROL, i_params->dmd2_srch_iq_inv);
- stv0900_write_bits(i_params, F0900_P2_MANUAL_ROLLOFF, 1);
-
- stv0900_set_search_standard(i_params, demod);
-
- if (i_params->dmd2_srch_algo != STV0900_BLIND_SEARCH)
- stv0900_start_search(i_params, demod);
- break;
}
- if (i_params->chip_id == 0x12) {
- stv0900_write_bits(i_params, stream_merger_field, 0);
+ stv0900_set_tuner(fe, intp->freq[demod], intp->bw[demod]);
+
+ agc1_power = MAKEWORD(stv0900_get_bits(intp, AGCIQ_VALUE1),
+ stv0900_get_bits(intp, AGCIQ_VALUE0));
+
+ aq_power = 0;
+
+ if (agc1_power == 0) {
+ for (i = 0; i < 5; i++)
+ aq_power += (stv0900_get_bits(intp, POWER_I) +
+ stv0900_get_bits(intp, POWER_Q)) / 2;
+
+ aq_power /= 5;
+ }
+
+ if ((agc1_power == 0) && (aq_power < IQPOWER_THRESHOLD)) {
+ intp->result[demod].locked = FALSE;
+ signal_type = STV0900_NOAGC1;
+ dprintk("%s: NO AGC1, POWERI, POWERQ\n", __func__);
+ } else {
+ stv0900_write_bits(intp, SPECINV_CONTROL,
+ intp->srch_iq_inv[demod]);
+ if (intp->chip_id <= 0x20) /*cut 2.0*/
+ stv0900_write_bits(intp, MANUALSX_ROLLOFF, 1);
+ else /*cut 3.0*/
+ stv0900_write_bits(intp, MANUALS2_ROLLOFF, 1);
+
+ stv0900_set_search_standard(intp, demod);
+
+ if (intp->srch_algo[demod] != STV0900_BLIND_SEARCH)
+ stv0900_start_search(intp, demod);
+ }
+
+ if (signal_type == STV0900_NOAGC1)
+ return signal_type;
+
+ if (intp->chip_id == 0x12) {
+ stv0900_write_bits(intp, RST_HWARE, 0);
msleep(3);
- stv0900_write_bits(i_params, stream_merger_field, 1);
- stv0900_write_bits(i_params, stream_merger_field, 0);
+ stv0900_write_bits(intp, RST_HWARE, 1);
+ stv0900_write_bits(intp, RST_HWARE, 0);
}
if (algo == STV0900_BLIND_SEARCH)
@@ -2736,12 +1923,12 @@
else if (algo == STV0900_COLD_START)
lock = stv0900_get_demod_cold_lock(fe, demod_timeout);
else if (algo == STV0900_WARM_START)
- lock = stv0900_get_demod_lock(i_params, demod, demod_timeout);
+ lock = stv0900_get_demod_lock(intp, demod, demod_timeout);
if ((lock == FALSE) && (algo == STV0900_COLD_START)) {
if (low_sr == FALSE) {
- if (stv0900_check_timing_lock(i_params, demod) == TRUE)
- lock = stv0900_sw_algo(i_params, demod);
+ if (stv0900_check_timing_lock(intp, demod) == TRUE)
+ lock = stv0900_sw_algo(intp, demod);
}
}
@@ -2750,98 +1937,64 @@
if ((lock == TRUE) && (signal_type == STV0900_RANGEOK)) {
stv0900_track_optimization(fe);
- if (i_params->chip_id <= 0x11) {
- if ((stv0900_get_standard(fe, STV0900_DEMOD_1) == STV0900_DVBS1_STANDARD) && (stv0900_get_standard(fe, STV0900_DEMOD_2) == STV0900_DVBS1_STANDARD)) {
+ if (intp->chip_id <= 0x11) {
+ if ((stv0900_get_standard(fe, 0) ==
+ STV0900_DVBS1_STANDARD) &&
+ (stv0900_get_standard(fe, 1) ==
+ STV0900_DVBS1_STANDARD)) {
msleep(20);
- stv0900_write_bits(i_params, stream_merger_field, 0);
+ stv0900_write_bits(intp, RST_HWARE, 0);
} else {
- stv0900_write_bits(i_params, stream_merger_field, 0);
+ stv0900_write_bits(intp, RST_HWARE, 0);
msleep(3);
- stv0900_write_bits(i_params, stream_merger_field, 1);
- stv0900_write_bits(i_params, stream_merger_field, 0);
+ stv0900_write_bits(intp, RST_HWARE, 1);
+ stv0900_write_bits(intp, RST_HWARE, 0);
}
- } else if (i_params->chip_id == 0x20) {
- stv0900_write_bits(i_params, stream_merger_field, 0);
+
+ } else if (intp->chip_id >= 0x20) {
+ stv0900_write_bits(intp, RST_HWARE, 0);
msleep(3);
- stv0900_write_bits(i_params, stream_merger_field, 1);
- stv0900_write_bits(i_params, stream_merger_field, 0);
+ stv0900_write_bits(intp, RST_HWARE, 1);
+ stv0900_write_bits(intp, RST_HWARE, 0);
}
- if (stv0900_wait_for_lock(i_params, demod, fec_timeout, fec_timeout) == TRUE) {
+ if (stv0900_wait_for_lock(intp, demod,
+ fec_timeout, fec_timeout) == TRUE) {
lock = TRUE;
- switch (demod) {
- case STV0900_DEMOD_1:
- default:
- i_params->dmd1_rslts.locked = TRUE;
- if (i_params->dmd1_rslts.standard == STV0900_DVBS2_STANDARD) {
- stv0900_set_dvbs2_rolloff(i_params, demod);
- stv0900_write_reg(i_params, R0900_P1_PDELCTRL2, 0x40);
- stv0900_write_reg(i_params, R0900_P1_PDELCTRL2, 0);
- stv0900_write_reg(i_params, R0900_P1_ERRCTRL1, 0x67);
- } else {
- stv0900_write_reg(i_params, R0900_P1_ERRCTRL1, 0x75);
- }
-
- stv0900_write_reg(i_params, R0900_P1_FBERCPT4, 0);
- stv0900_write_reg(i_params, R0900_P1_ERRCTRL2, 0xc1);
- break;
- case STV0900_DEMOD_2:
- i_params->dmd2_rslts.locked = TRUE;
-
- if (i_params->dmd2_rslts.standard == STV0900_DVBS2_STANDARD) {
- stv0900_set_dvbs2_rolloff(i_params, demod);
- stv0900_write_reg(i_params, R0900_P2_PDELCTRL2, 0x60);
- stv0900_write_reg(i_params, R0900_P2_PDELCTRL2, 0x20);
- stv0900_write_reg(i_params, R0900_P2_ERRCTRL1, 0x67);
- } else {
- stv0900_write_reg(i_params, R0900_P2_ERRCTRL1, 0x75);
- }
-
- stv0900_write_reg(i_params, R0900_P2_FBERCPT4, 0);
-
- stv0900_write_reg(i_params, R0900_P2_ERRCTRL2, 0xc1);
- break;
+ intp->result[demod].locked = TRUE;
+ if (intp->result[demod].standard ==
+ STV0900_DVBS2_STANDARD) {
+ stv0900_set_dvbs2_rolloff(intp, demod);
+ stv0900_write_bits(intp, RESET_UPKO_COUNT, 1);
+ stv0900_write_bits(intp, RESET_UPKO_COUNT, 0);
+ stv0900_write_reg(intp, ERRCTRL1, 0x67);
+ } else {
+ stv0900_write_reg(intp, ERRCTRL1, 0x75);
}
+
+ stv0900_write_reg(intp, FBERCPT4, 0);
+ stv0900_write_reg(intp, ERRCTRL2, 0xc1);
} else {
lock = FALSE;
signal_type = STV0900_NODATA;
- no_signal = stv0900_check_signal_presence(i_params, demod);
+ no_signal = stv0900_check_signal_presence(intp, demod);
- switch (demod) {
- case STV0900_DEMOD_1:
- default:
- i_params->dmd1_rslts.locked = FALSE;
- break;
- case STV0900_DEMOD_2:
- i_params->dmd2_rslts.locked = FALSE;
- break;
- }
+ intp->result[demod].locked = FALSE;
}
}
- if ((signal_type == STV0900_NODATA) && (no_signal == FALSE)) {
- switch (demod) {
- case STV0900_DEMOD_1:
- default:
- if (i_params->chip_id <= 0x11) {
- if ((stv0900_get_bits(i_params, F0900_P1_HEADER_MODE) == STV0900_DVBS_FOUND) &&
- (i_params->dmd1_srch_iq_inv <= STV0900_IQ_AUTO_NORMAL_FIRST))
- signal_type = stv0900_dvbs1_acq_workaround(fe);
- } else
- i_params->dmd1_rslts.locked = FALSE;
+ if ((signal_type != STV0900_NODATA) || (no_signal != FALSE))
+ return signal_type;
- break;
- case STV0900_DEMOD_2:
- if (i_params->chip_id <= 0x11) {
- if ((stv0900_get_bits(i_params, F0900_P2_HEADER_MODE) == STV0900_DVBS_FOUND) &&
- (i_params->dmd2_srch_iq_inv <= STV0900_IQ_AUTO_NORMAL_FIRST))
- signal_type = stv0900_dvbs1_acq_workaround(fe);
- } else
- i_params->dmd2_rslts.locked = FALSE;
- break;
- }
+ if (intp->chip_id > 0x11) {
+ intp->result[demod].locked = FALSE;
+ return signal_type;
}
+ if ((stv0900_get_bits(intp, HEADER_MODE) == STV0900_DVBS_FOUND) &&
+ (intp->srch_iq_inv[demod] <= STV0900_IQ_AUTO_NORMAL_FIRST))
+ signal_type = stv0900_dvbs1_acq_workaround(fe);
+
return signal_type;
}
diff --git a/drivers/media/dvb/frontends/stv090x.c b/drivers/media/dvb/frontends/stv090x.c
index 488bdfb..48edd54 100644
--- a/drivers/media/dvb/frontends/stv090x.c
+++ b/drivers/media/dvb/frontends/stv090x.c
@@ -825,7 +825,7 @@
sym /= (state->mclk >> 7);
}
- if (STV090x_WRITE_DEMOD(state, SFRLOW1, ((sym >> 8) & 0xff)) < 0) /* MSB */
+ if (STV090x_WRITE_DEMOD(state, SFRLOW1, ((sym >> 8) & 0x7f)) < 0) /* MSB */
goto err;
if (STV090x_WRITE_DEMOD(state, SFRLOW0, (sym & 0xff)) < 0) /* LSB */
goto err;
@@ -1238,6 +1238,8 @@
goto err;
}
+ if (stv090x_set_vit_thtracq(state) < 0)
+ goto err;
break;
case STV090x_SEARCH_AUTO:
@@ -1278,17 +1280,8 @@
goto err;
}
- if (state->srate >= 2000000) {
- /* Srate >= 2MSPS, Viterbi threshold to acquire */
- if (stv090x_set_vit_thacq(state) < 0)
- goto err;
- } else {
- /* Srate < 2MSPS, Reset Viterbi thresholdto track
- * and then re-acquire
- */
- if (stv090x_set_vit_thtracq(state) < 0)
- goto err;
- }
+ if (stv090x_set_vit_thacq(state) < 0)
+ goto err;
if (stv090x_set_viterbi(state) < 0)
goto err;
@@ -1317,7 +1310,7 @@
goto err;
if (STV090x_WRITE_DEMOD(state, CFRUP1, 0x0f) < 0)
goto err;
- if (STV090x_WRITE_DEMOD(state, CFRUP1, 0xff) < 0)
+ if (STV090x_WRITE_DEMOD(state, CFRUP0, 0xff) < 0)
goto err;
if (STV090x_WRITE_DEMOD(state, CFRLOW1, 0xf0) < 0)
goto err;
@@ -1371,7 +1364,7 @@
if (STV090x_WRITE_DEMOD(state, CFRUP1, MSB(freq)) < 0)
goto err;
- if (STV090x_WRITE_DEMOD(state, CFRUP1, LSB(freq)) < 0)
+ if (STV090x_WRITE_DEMOD(state, CFRUP0, LSB(freq)) < 0)
goto err;
freq *= -1;
@@ -1422,6 +1415,9 @@
if (STV090x_WRITE_DEMOD(state, DMDCFG2, reg) < 0)
goto err;
+ if (STV090x_WRITE_DEMOD(state, RTC, 0x88) < 0)
+ goto err;
+
if (state->dev_ver >= 0x20) {
/*Frequency offset detector setting*/
if (state->srate < 2000000) {
@@ -1430,20 +1426,22 @@
if (STV090x_WRITE_DEMOD(state, CARFREQ, 0x39) < 0)
goto err;
} else {
- /* Cut 2 */
+ /* Cut 3 */
if (STV090x_WRITE_DEMOD(state, CARFREQ, 0x89) < 0)
goto err;
}
if (STV090x_WRITE_DEMOD(state, CARHDR, 0x40) < 0)
goto err;
- }
-
- if (state->srate < 10000000) {
+ } else if (state->srate < 10000000) {
if (STV090x_WRITE_DEMOD(state, CARFREQ, 0x4c) < 0)
goto err;
+ if (STV090x_WRITE_DEMOD(state, CARHDR, 0x20) < 0)
+ goto err;
} else {
if (STV090x_WRITE_DEMOD(state, CARFREQ, 0x4b) < 0)
goto err;
+ if (STV090x_WRITE_DEMOD(state, CARHDR, 0x20) < 0)
+ goto err;
}
} else {
if (state->srate < 10000000) {
@@ -1485,14 +1483,14 @@
static int stv090x_get_agc2_min_level(struct stv090x_state *state)
{
- u32 agc2_min = 0, agc2 = 0, freq_init, freq_step, reg;
+ u32 agc2_min = 0xffff, agc2 = 0, freq_init, freq_step, reg;
s32 i, j, steps, dir;
if (STV090x_WRITE_DEMOD(state, AGC2REF, 0x38) < 0)
goto err;
reg = STV090x_READ_DEMOD(state, DMDCFGMD);
- STV090x_SETFIELD_Px(reg, SCAN_ENABLE_FIELD, 1);
- STV090x_SETFIELD_Px(reg, CFR_AUTOSCAN_FIELD, 1);
+ STV090x_SETFIELD_Px(reg, SCAN_ENABLE_FIELD, 0);
+ STV090x_SETFIELD_Px(reg, CFR_AUTOSCAN_FIELD, 0);
if (STV090x_WRITE_DEMOD(state, DMDCFGMD, reg) < 0)
goto err;
@@ -1509,10 +1507,8 @@
if (stv090x_set_srate(state, 1000000) < 0)
goto err;
- steps = -1 + state->search_range / 1000000;
- steps /= 2;
- steps = (2 * steps) + 1;
- if (steps < 0)
+ steps = state->search_range / 1000000;
+ if (steps <= 0)
steps = 1;
dir = 1;
@@ -1525,7 +1521,7 @@
else
freq_init = freq_init - (freq_step * i);
- dir = -1;
+ dir *= -1;
if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x5c) < 0) /* Demod RESET */
goto err;
@@ -1536,13 +1532,14 @@
if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x58) < 0) /* Demod RESET */
goto err;
msleep(10);
+
+ agc2 = 0;
for (j = 0; j < 10; j++) {
- agc2 += STV090x_READ_DEMOD(state, AGC2I1) << 8;
- agc2 |= STV090x_READ_DEMOD(state, AGC2I0);
+ agc2 += (STV090x_READ_DEMOD(state, AGC2I1) << 8) |
+ STV090x_READ_DEMOD(state, AGC2I0);
}
agc2 /= 10;
- agc2_min = 0xffff;
- if (agc2 < 0xffff)
+ if (agc2 < agc2_min)
agc2_min = agc2;
}
@@ -1584,6 +1581,12 @@
int tmg_lock = 0, i;
s32 tmg_cpt = 0, dir = 1, steps, cur_step = 0, freq;
u32 srate_coarse = 0, agc2 = 0, car_step = 1200, reg;
+ u32 agc2th;
+
+ if (state->dev_ver >= 0x30)
+ agc2th = 0x2e00;
+ else
+ agc2th = 0x1f00;
reg = STV090x_READ_DEMOD(state, DMDISTATE);
STV090x_SETFIELD_Px(reg, I2C_DEMOD_MODE_FIELD, 0x1f); /* Demod RESET */
@@ -1591,13 +1594,15 @@
goto err;
if (STV090x_WRITE_DEMOD(state, TMGCFG, 0x12) < 0)
goto err;
+ if (STV090x_WRITE_DEMOD(state, TMGCFG2, 0xc0) < 0)
+ goto err;
if (STV090x_WRITE_DEMOD(state, TMGTHRISE, 0xf0) < 0)
goto err;
if (STV090x_WRITE_DEMOD(state, TMGTHFALL, 0xe0) < 0)
goto err;
reg = STV090x_READ_DEMOD(state, DMDCFGMD);
STV090x_SETFIELD_Px(reg, SCAN_ENABLE_FIELD, 1);
- STV090x_SETFIELD_Px(reg, CFR_AUTOSCAN_FIELD, 1);
+ STV090x_SETFIELD_Px(reg, CFR_AUTOSCAN_FIELD, 0);
if (STV090x_WRITE_DEMOD(state, DMDCFGMD, reg) < 0)
goto err;
@@ -1611,13 +1616,13 @@
goto err;
if (STV090x_WRITE_DEMOD(state, DMDTOM, 0x00) < 0)
goto err;
- if (STV090x_WRITE_DEMOD(state, AGC2REF, 0x60) < 0)
+ if (STV090x_WRITE_DEMOD(state, AGC2REF, 0x50) < 0)
goto err;
if (state->dev_ver >= 0x30) {
if (STV090x_WRITE_DEMOD(state, CARFREQ, 0x99) < 0)
goto err;
- if (STV090x_WRITE_DEMOD(state, SFRSTEP, 0x95) < 0)
+ if (STV090x_WRITE_DEMOD(state, SFRSTEP, 0x98) < 0)
goto err;
} else if (state->dev_ver >= 0x20) {
@@ -1652,23 +1657,31 @@
while ((!tmg_lock) && (cur_step < steps)) {
if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x5f) < 0) /* Demod RESET */
goto err;
- reg = STV090x_READ_DEMOD(state, DMDISTATE);
- STV090x_SETFIELD_Px(reg, I2C_DEMOD_MODE_FIELD, 0x00); /* trigger acquisition */
- if (STV090x_WRITE_DEMOD(state, DMDISTATE, reg) < 0)
+ if (STV090x_WRITE_DEMOD(state, CFRINIT1, 0x00) < 0)
+ goto err;
+ if (STV090x_WRITE_DEMOD(state, CFRINIT0, 0x00) < 0)
+ goto err;
+ if (STV090x_WRITE_DEMOD(state, SFRINIT1, 0x00) < 0)
+ goto err;
+ if (STV090x_WRITE_DEMOD(state, SFRINIT0, 0x00) < 0)
+ goto err;
+ /* trigger acquisition */
+ if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x40) < 0)
goto err;
msleep(50);
for (i = 0; i < 10; i++) {
reg = STV090x_READ_DEMOD(state, DSTATUS);
if (STV090x_GETFIELD_Px(reg, TMGLOCK_QUALITY_FIELD) >= 2)
tmg_cpt++;
- agc2 += STV090x_READ_DEMOD(state, AGC2I1) << 8;
- agc2 |= STV090x_READ_DEMOD(state, AGC2I0);
+ agc2 += (STV090x_READ_DEMOD(state, AGC2I1) << 8) |
+ STV090x_READ_DEMOD(state, AGC2I0);
}
agc2 /= 10;
srate_coarse = stv090x_get_srate(state, state->mclk);
cur_step++;
dir *= -1;
- if ((tmg_cpt >= 5) && (agc2 < 0x1f00) && (srate_coarse < 55000000) && (srate_coarse > 850000))
+ if ((tmg_cpt >= 5) && (agc2 < agc2th) &&
+ (srate_coarse < 50000000) && (srate_coarse > 850000))
tmg_lock = 1;
else if (cur_step < steps) {
if (dir > 0)
@@ -1681,7 +1694,7 @@
goto err;
if (state->config->tuner_set_frequency) {
- if (state->config->tuner_set_frequency(fe, state->frequency) < 0)
+ if (state->config->tuner_set_frequency(fe, freq) < 0)
goto err;
}
@@ -1738,7 +1751,7 @@
else {
if (STV090x_WRITE_DEMOD(state, DMDISTATE, 0x1f) < 0) /* Demod RESET */
goto err;
- if (STV090x_WRITE_DEMOD(state, TMGCFG2, 0x01) < 0)
+ if (STV090x_WRITE_DEMOD(state, TMGCFG2, 0xc1) < 0)
goto err;
if (STV090x_WRITE_DEMOD(state, TMGTHRISE, 0x20) < 0)
goto err;
@@ -1751,6 +1764,9 @@
if (STV090x_WRITE_DEMOD(state, DMDCFGMD, reg) < 0)
goto err;
+ if (STV090x_WRITE_DEMOD(state, AGC2REF, 0x38) < 0)
+ goto err;
+
if (state->dev_ver >= 0x30) {
if (STV090x_WRITE_DEMOD(state, CARFREQ, 0x79) < 0)
goto err;
@@ -1856,12 +1872,12 @@
static int stv090x_blind_search(struct stv090x_state *state)
{
u32 agc2, reg, srate_coarse;
- s32 timeout_dmd = 500, cpt_fail, agc2_ovflw, i;
+ s32 cpt_fail, agc2_ovflw, i;
u8 k_ref, k_max, k_min;
int coarse_fail, lock;
- k_max = 120;
- k_min = 30;
+ k_max = 110;
+ k_min = 10;
agc2 = stv090x_get_agc2_min_level(state);
@@ -1900,7 +1916,8 @@
srate_coarse = stv090x_srate_srch_fine(state);
if (srate_coarse != 0) {
stv090x_get_lock_tmg(state);
- lock = stv090x_get_dmdlock(state, timeout_dmd);
+ lock = stv090x_get_dmdlock(state,
+ state->DemodTimeout);
} else {
lock = 0;
}
@@ -1908,8 +1925,8 @@
cpt_fail = 0;
agc2_ovflw = 0;
for (i = 0; i < 10; i++) {
- agc2 = STV090x_READ_DEMOD(state, AGC2I1) << 8;
- agc2 |= STV090x_READ_DEMOD(state, AGC2I0);
+ agc2 += (STV090x_READ_DEMOD(state, AGC2I1) << 8) |
+ STV090x_READ_DEMOD(state, AGC2I0);
if (agc2 >= 0xff00)
agc2_ovflw++;
reg = STV090x_READ_DEMOD(state, DSTATUS2);
@@ -1923,7 +1940,7 @@
lock = 0;
}
- k_ref -= 30;
+ k_ref -= 20;
} while ((k_ref >= k_min) && (!lock) && (!coarse_fail));
}
@@ -2062,7 +2079,7 @@
goto err;
if (state->config->tuner_set_frequency) {
- if (state->config->tuner_set_frequency(fe, state->frequency) < 0)
+ if (state->config->tuner_set_frequency(fe, freq) < 0)
goto err;
}
@@ -2093,17 +2110,6 @@
goto err;
STV090x_WRITE_DEMOD(state, DMDISTATE, 0x1c);
- if (state->delsys == STV090x_DVBS2) {
- reg = STV090x_READ_DEMOD(state, DMDCFGMD);
- STV090x_SETFIELD_Px(reg, DVBS1_ENABLE_FIELD, 0);
- STV090x_SETFIELD_Px(reg, DVBS2_ENABLE_FIELD, 0);
- if (STV090x_WRITE_DEMOD(state, DMDCFGMD, reg) < 0)
- goto err;
- STV090x_SETFIELD_Px(reg, DVBS1_ENABLE_FIELD, 1);
- STV090x_SETFIELD_Px(reg, DVBS2_ENABLE_FIELD, 1);
- if (STV090x_WRITE_DEMOD(state, DMDCFGMD, reg) < 0)
- goto err;
- }
if (STV090x_WRITE_DEMOD(state, CFRINIT1, 0x00) < 0)
goto err;
if (STV090x_WRITE_DEMOD(state, CFRINIT0, 0x00) < 0)
@@ -2425,7 +2431,7 @@
derot = (int_1 * int_2) +
((int_1 * tmp_2) >> 12) +
- ((int_1 * tmp_1) >> 12);
+ ((int_2 * tmp_1) >> 12);
return derot;
}
@@ -2732,7 +2738,7 @@
switch (state->delsys) {
case STV090x_DVBS1:
case STV090x_DSS:
- if (state->algo == STV090x_SEARCH_AUTO) {
+ if (state->search_mode == STV090x_SEARCH_AUTO) {
reg = STV090x_READ_DEMOD(state, DMDCFGMD);
STV090x_SETFIELD_Px(reg, DVBS1_ENABLE_FIELD, 1);
STV090x_SETFIELD_Px(reg, DVBS2_ENABLE_FIELD, 0);
@@ -2857,6 +2863,9 @@
if (stv090x_set_srate(state, srate) < 0)
goto err;
blind_tune = 1;
+
+ if (stv090x_dvbs_track_crl(state) < 0)
+ goto err;
}
if (state->dev_ver >= 0x20) {
@@ -3042,7 +3051,7 @@
struct dvb_frontend *fe = &state->frontend;
enum stv090x_signal_state signal_state = STV090x_NOCARRIER;
u32 reg;
- s32 timeout_dmd = 500, timeout_fec = 50, agc1_power, power_iq = 0, i;
+ s32 agc1_power, power_iq = 0, i;
int lock = 0, low_sr = 0, no_signal = 0;
reg = STV090x_READ_DEMOD(state, TSCFGH);
@@ -3054,8 +3063,13 @@
goto err;
if (state->dev_ver >= 0x20) {
- if (STV090x_WRITE_DEMOD(state, CORRELABS, 0x9e) < 0) /* cut 2.0 */
- goto err;
+ if (state->srate > 5000000) {
+ if (STV090x_WRITE_DEMOD(state, CORRELABS, 0x9e) < 0)
+ goto err;
+ } else {
+ if (STV090x_WRITE_DEMOD(state, CORRELABS, 0x82) < 0)
+ goto err;
+ }
}
stv090x_get_lock_tmg(state);
@@ -3175,7 +3189,7 @@
if ((agc1_power == 0) && (power_iq < STV090x_IQPOWER_THRESHOLD)) {
dprintk(FE_ERROR, 1, "No Signal: POWER_IQ=0x%02x", power_iq);
lock = 0;
-
+ signal_state = STV090x_NOAGC1;
} else {
reg = STV090x_READ_DEMOD(state, DEMOD);
STV090x_SETFIELD_Px(reg, SPECINV_CONTROL_FIELD, state->inversion);
@@ -3199,18 +3213,17 @@
}
}
- /* need to check for AGC1 state */
-
-
+ if (signal_state == STV090x_NOAGC1)
+ return signal_state;
if (state->algo == STV090x_BLIND_SEARCH)
lock = stv090x_blind_search(state);
else if (state->algo == STV090x_COLD_SEARCH)
- lock = stv090x_get_coldlock(state, timeout_dmd);
+ lock = stv090x_get_coldlock(state, state->DemodTimeout);
else if (state->algo == STV090x_WARM_SEARCH)
- lock = stv090x_get_dmdlock(state, timeout_dmd);
+ lock = stv090x_get_dmdlock(state, state->DemodTimeout);
if ((!lock) && (state->algo == STV090x_COLD_SEARCH)) {
if (!low_sr) {
@@ -3245,8 +3258,9 @@
goto err;
}
- if (stv090x_get_lock(state, timeout_fec, timeout_fec)) {
- lock = 1;
+ lock = stv090x_get_lock(state, state->FecTimeout,
+ state->FecTimeout);
+ if (lock) {
if (state->delsys == STV090x_DVBS2) {
stv090x_set_s2rolloff(state);
@@ -3273,7 +3287,6 @@
if (STV090x_WRITE_DEMOD(state, ERRCTRL2, 0xc1) < 0)
goto err;
} else {
- lock = 0;
signal_state = STV090x_NODATA;
no_signal = stv090x_chk_signal(state);
}
@@ -3296,7 +3309,13 @@
state->search_mode = STV090x_SEARCH_AUTO;
state->algo = STV090x_COLD_SEARCH;
state->fec = STV090x_PRERR;
- state->search_range = 2000000;
+ if (state->srate > 10000000) {
+ dprintk(FE_DEBUG, 1, "Search range: 10 MHz");
+ state->search_range = 10000000;
+ } else {
+ dprintk(FE_DEBUG, 1, "Search range: 5 MHz");
+ state->search_range = 5000000;
+ }
if (stv090x_algo(state) == STV090x_RANGEOK) {
dprintk(FE_DEBUG, 1, "Search success!");
@@ -3309,7 +3328,6 @@
return DVBFE_ALGO_SEARCH_ERROR;
}
-/* FIXME! */
static int stv090x_read_status(struct dvb_frontend *fe, enum fe_status *status)
{
struct stv090x_state *state = fe->demodulator_priv;
@@ -3331,9 +3349,15 @@
dprintk(FE_DEBUG, 1, "Delivery system: DVB-S2");
reg = STV090x_READ_DEMOD(state, DSTATUS);
if (STV090x_GETFIELD_Px(reg, LOCK_DEFINITIF_FIELD)) {
- reg = STV090x_READ_DEMOD(state, TSSTATUS);
- if (STV090x_GETFIELD_Px(reg, TSFIFO_LINEOK_FIELD)) {
- *status = FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK;
+ reg = STV090x_READ_DEMOD(state, PDELSTATUS1);
+ if (STV090x_GETFIELD_Px(reg, PKTDELIN_LOCK_FIELD)) {
+ reg = STV090x_READ_DEMOD(state, TSSTATUS);
+ if (STV090x_GETFIELD_Px(reg, TSFIFO_LINEOK_FIELD)) {
+ *status = FE_HAS_CARRIER |
+ FE_HAS_VITERBI |
+ FE_HAS_SYNC |
+ FE_HAS_LOCK;
+ }
}
}
break;
@@ -3412,14 +3436,12 @@
int res = 0;
int min = 0, med;
- if (val < tab[min].read)
- res = tab[min].real;
- else if (val >= tab[max].read)
- res = tab[max].real;
- else {
+ if ((val >= tab[min].read && val < tab[max].read) ||
+ (val >= tab[max].read && val < tab[min].read)) {
while ((max - min) > 1) {
med = (max + min) / 2;
- if (val >= tab[min].read && val < tab[med].read)
+ if ((val >= tab[min].read && val < tab[med].read) ||
+ (val >= tab[med].read && val < tab[min].read))
max = med;
else
min = med;
@@ -3428,6 +3450,18 @@
(tab[max].real - tab[min].real) /
(tab[max].read - tab[min].read)) +
tab[min].real;
+ } else {
+ if (tab[min].read < tab[max].read) {
+ if (val < tab[min].read)
+ res = tab[min].real;
+ else if (val >= tab[max].read)
+ res = tab[max].real;
+ } else {
+ if (val >= tab[min].read)
+ res = tab[min].real;
+ else if (val < tab[max].read)
+ res = tab[max].real;
+ }
}
return res;
@@ -3437,16 +3471,22 @@
{
struct stv090x_state *state = fe->demodulator_priv;
u32 reg;
- s32 agc;
+ s32 agc_0, agc_1, agc;
+ s32 str;
reg = STV090x_READ_DEMOD(state, AGCIQIN1);
- agc = STV090x_GETFIELD_Px(reg, AGCIQ_VALUE_FIELD);
+ agc_1 = STV090x_GETFIELD_Px(reg, AGCIQ_VALUE_FIELD);
+ reg = STV090x_READ_DEMOD(state, AGCIQIN0);
+ agc_0 = STV090x_GETFIELD_Px(reg, AGCIQ_VALUE_FIELD);
+ agc = MAKEWORD16(agc_1, agc_0);
- *strength = stv090x_table_lookup(stv090x_rf_tab, ARRAY_SIZE(stv090x_rf_tab) - 1, agc);
+ str = stv090x_table_lookup(stv090x_rf_tab,
+ ARRAY_SIZE(stv090x_rf_tab) - 1, agc);
if (agc > stv090x_rf_tab[0].read)
- *strength = 5;
+ str = 0;
else if (agc < stv090x_rf_tab[ARRAY_SIZE(stv090x_rf_tab) - 1].read)
- *strength = -100;
+ str = -100;
+ *strength = (str + 100) * 0xFFFF / 100;
return 0;
}
@@ -3457,6 +3497,8 @@
u32 reg_0, reg_1, reg, i;
s32 val_0, val_1, val = 0;
u8 lock_f;
+ s32 div;
+ u32 last;
switch (state->delsys) {
case STV090x_DVBS2:
@@ -3468,14 +3510,15 @@
reg_1 = STV090x_READ_DEMOD(state, NNOSPLHT1);
val_1 = STV090x_GETFIELD_Px(reg_1, NOSPLHT_NORMED_FIELD);
reg_0 = STV090x_READ_DEMOD(state, NNOSPLHT0);
- val_0 = STV090x_GETFIELD_Px(reg_1, NOSPLHT_NORMED_FIELD);
+ val_0 = STV090x_GETFIELD_Px(reg_0, NOSPLHT_NORMED_FIELD);
val += MAKEWORD16(val_1, val_0);
msleep(1);
}
val /= 16;
- *cnr = stv090x_table_lookup(stv090x_s2cn_tab, ARRAY_SIZE(stv090x_s2cn_tab) - 1, val);
- if (val < stv090x_s2cn_tab[ARRAY_SIZE(stv090x_s2cn_tab) - 1].read)
- *cnr = 1000;
+ last = ARRAY_SIZE(stv090x_s2cn_tab) - 1;
+ div = stv090x_s2cn_tab[0].read -
+ stv090x_s2cn_tab[last].read;
+ *cnr = 0xFFFF - ((val * 0xFFFF) / div);
}
break;
@@ -3489,14 +3532,15 @@
reg_1 = STV090x_READ_DEMOD(state, NOSDATAT1);
val_1 = STV090x_GETFIELD_Px(reg_1, NOSDATAT_UNNORMED_FIELD);
reg_0 = STV090x_READ_DEMOD(state, NOSDATAT0);
- val_0 = STV090x_GETFIELD_Px(reg_1, NOSDATAT_UNNORMED_FIELD);
+ val_0 = STV090x_GETFIELD_Px(reg_0, NOSDATAT_UNNORMED_FIELD);
val += MAKEWORD16(val_1, val_0);
msleep(1);
}
val /= 16;
- *cnr = stv090x_table_lookup(stv090x_s1cn_tab, ARRAY_SIZE(stv090x_s1cn_tab) - 1, val);
- if (val < stv090x_s2cn_tab[ARRAY_SIZE(stv090x_s1cn_tab) - 1].read)
- *cnr = 1000;
+ last = ARRAY_SIZE(stv090x_s1cn_tab) - 1;
+ div = stv090x_s1cn_tab[0].read -
+ stv090x_s1cn_tab[last].read;
+ *cnr = 0xFFFF - ((val * 0xFFFF) / div);
}
break;
default:
@@ -3732,6 +3776,8 @@
{
u32 reg = 0;
+ reg = stv090x_read_reg(state, STV090x_GENCFG);
+
switch (ldpc_mode) {
case STV090x_DUAL:
default:
diff --git a/drivers/media/dvb/frontends/stv090x_priv.h b/drivers/media/dvb/frontends/stv090x_priv.h
index 5a4a017..5921a8d 100644
--- a/drivers/media/dvb/frontends/stv090x_priv.h
+++ b/drivers/media/dvb/frontends/stv090x_priv.h
@@ -83,7 +83,7 @@
#define STV090x_IQPOWER_THRESHOLD 30
#define STV090x_SEARCH_AGC2_TH_CUT20 700
-#define STV090x_SEARCH_AGC2_TH_CUT30 1200
+#define STV090x_SEARCH_AGC2_TH_CUT30 1400
#define STV090x_SEARCH_AGC2_TH(__ver) \
((__ver <= 0x20) ? \
@@ -91,6 +91,7 @@
STV090x_SEARCH_AGC2_TH_CUT30)
enum stv090x_signal_state {
+ STV090x_NOAGC1,
STV090x_NOCARRIER,
STV090x_NODATA,
STV090x_DATAOK,
diff --git a/drivers/media/dvb/frontends/stv090x_reg.h b/drivers/media/dvb/frontends/stv090x_reg.h
index 57b6abb..2502855 100644
--- a/drivers/media/dvb/frontends/stv090x_reg.h
+++ b/drivers/media/dvb/frontends/stv090x_reg.h
@@ -44,7 +44,7 @@
#define STV090x_OFFST_OUTSERRS2_HZ_FIELD 5
#define STV090x_WIDTH_OUTSERRS2_HZ_FIELD 1
#define STV090x_OFFST_OUTSERRS3_HZ_FIELD 4
-#define STV090x_WIDTH_OUTPARRS3_HZ_FIELD 1
+#define STV090x_WIDTH_OUTSERRS3_HZ_FIELD 1
#define STV090x_OFFST_OUTPARRS3_HZ_FIELD 3
#define STV090x_WIDTH_OUTPARRS3_HZ_FIELD 1
@@ -113,24 +113,24 @@
#define STV090x_IRQMASK3 0xf124
#define STV090x_OFFST_MPLL_LOCK_FIELD 5
#define STV090x_WIDTH_MPLL_LOCK_FIELD 1
-#define STV090x_OFFST_MSTREAM_LCK_3_FIELD 2
-#define STV090x_WIDTH_MSTREAM_LCK_3_FIELD 3
-#define STV090x_OFFST_MSTREAM_LCK_2_FIELD 2
-#define STV090x_WIDTH_MSTREAM_LCK_2_FIELD 3
+#define STV090x_OFFST_MSTREAM_LCK_3_FIELD 4
+#define STV090x_WIDTH_MSTREAM_LCK_3_FIELD 1
+#define STV090x_OFFST_MSTREAM_LCK_2_FIELD 3
+#define STV090x_WIDTH_MSTREAM_LCK_2_FIELD 1
#define STV090x_OFFST_MSTREAM_LCK_1_FIELD 2
-#define STV090x_WIDTH_MSTREAM_LCK_1_FIELD 3
+#define STV090x_WIDTH_MSTREAM_LCK_1_FIELD 1
#define STV090x_OFFST_MDVBS1_PRF_2_FIELD 1
#define STV090x_WIDTH_MDVBS1_PRF_2_FIELD 1
#define STV090x_OFFST_MDVBS1_PRF_1_FIELD 0
#define STV090x_WIDTH_MDVBS1_PRF_1_FIELD 1
#define STV090x_IRQMASK2 0xf125
-#define STV090x_OFFST_MSPY_ENDSIM_3_FIELD 5
-#define STV090x_WIDTH_MSPY_ENDSIM_3_FIELD 3
-#define STV090x_OFFST_MSPY_ENDSIM_2_FIELD 5
-#define STV090x_WIDTH_MSPY_ENDSIM_2_FIELD 3
+#define STV090x_OFFST_MSPY_ENDSIM_3_FIELD 7
+#define STV090x_WIDTH_MSPY_ENDSIM_3_FIELD 1
+#define STV090x_OFFST_MSPY_ENDSIM_2_FIELD 6
+#define STV090x_WIDTH_MSPY_ENDSIM_2_FIELD 1
#define STV090x_OFFST_MSPY_ENDSIM_1_FIELD 5
-#define STV090x_WIDTH_MSPY_ENDSIM_1_FIELD 3
+#define STV090x_WIDTH_MSPY_ENDSIM_1_FIELD 1
#define STV090x_OFFST_MPKTDEL_ERROR_2_FIELD 4
#define STV090x_WIDTH_MPKTDEL_ERROR_2_FIELD 1
#define STV090x_OFFST_MPKTDEL_LOCKB_2_FIELD 3
@@ -370,7 +370,7 @@
#define STV090x_OFFST_SELX1RATIO_FIELD 5
#define STV090x_WIDTH_SELX1RATIO_FIELD 1
#define STV090x_OFFST_STOP_PLL_FIELD 3
-#define STV090x_WIDTH_SELX1RATIO_FIELD 1
+#define STV090x_WIDTH_STOP_PLL_FIELD 1
#define STV090x_OFFST_BYPASSPLLFSK_FIELD 2
#define STV090x_WIDTH_BYPASSPLLFSK_FIELD 1
#define STV090x_OFFST_SELOSCI_FIELD 1
@@ -616,7 +616,7 @@
#define STV090x_OFFST_Px_CONT_TONE_FIELD 4
#define STV090x_WIDTH_Px_CONT_TONE_FIELD 1
#define STV090x_OFFST_Px_FIFO_4BREADY_FIELD 3
-#define STV090x_WIDTH_Px_FIFO_4BREADY_FIELD 2
+#define STV090x_WIDTH_Px_FIFO_4BREADY_FIELD 1
#define STV090x_OFFST_Px_FIFO_EMPTY_FIELD 2
#define STV090x_WIDTH_Px_FIFO_EMPTY_FIELD 1
#define STV090x_OFFST_Px_ABORT_DISRX_FIELD 0
@@ -847,12 +847,10 @@
#define STV090x_WIDTH_Px_DVBS2_ENABLE_FIELD 1
#define STV090x_OFFST_Px_DVBS1_ENABLE_FIELD 6
#define STV090x_WIDTH_Px_DVBS1_ENABLE_FIELD 1
-#define STV090x_OFFST_Px_CFR_AUTOSCAN_FIELD 5 /* check */
-#define STV090x_WIDTH_Px_CFR_AUTOSCAN_FIELD 1
-#define STV090x_OFFST_Px_SCAN_ENABLE_FIELD 4 /* check */
+#define STV090x_OFFST_Px_SCAN_ENABLE_FIELD 4
#define STV090x_WIDTH_Px_SCAN_ENABLE_FIELD 1
-#define STV090x_OFFST_Px_TUN_AUTOSCAN_FIELD 3
-#define STV090x_WIDTH_Px_TUN_AUTOSCAN_FIELD 1
+#define STV090x_OFFST_Px_CFR_AUTOSCAN_FIELD 3
+#define STV090x_WIDTH_Px_CFR_AUTOSCAN_FIELD 1
#define STV090x_OFFST_Px_NOFORCE_RELOCK_FIELD 2
#define STV090x_WIDTH_Px_NOFORCE_RELOCK_FIELD 1
#define STV090x_OFFST_Px_TUN_RNG_FIELD 0
@@ -885,7 +883,7 @@
#define STV090x_P2_DMDFLYW STV090x_Px_DMDFLYW(2)
#define STV090x_OFFST_Px_I2C_IRQVAL_FIELD 4
#define STV090x_WIDTH_Px_I2C_IRQVAL_FIELD 4
-#define STV090x_OFFST_Px_FLYWHEEL_CPT_FIELD 0 /* check */
+#define STV090x_OFFST_Px_FLYWHEEL_CPT_FIELD 0
#define STV090x_WIDTH_Px_FLYWHEEL_CPT_FIELD 4
#define STV090x_Px_DSTATUS3(__x) (0xF41D - (__x - 1) * 0x200)
@@ -1048,12 +1046,12 @@
#define STV090x_P1_CFRINC1 STV090x_Px_CFRINC1(1)
#define STV090x_P2_CFRINC1 STV090x_Px_CFRINC1(2)
#define STV090x_OFFST_Px_CFR_INC1_FIELD 0
-#define STV090x_WIDTH_Px_CFR_INC1_FIELD 7
+#define STV090x_WIDTH_Px_CFR_INC1_FIELD 7 /* check */
#define STV090x_Px_CFRINC0(__x) (0xF44B - (__x - 1) * 0x200)
#define STV090x_P1_CFRINC0 STV090x_Px_CFRINC0(1)
#define STV090x_P2_CFRINC0 STV090x_Px_CFRINC0(2)
-#define STV090x_OFFST_Px_CFR_INC0_FIELD 4
+#define STV090x_OFFST_Px_CFR_INC0_FIELD 4 /* check */
#define STV090x_WIDTH_Px_CFR_INC0_FIELD 4
#define STV090x_Pn_CFRy(__x, __y) (0xF44E - (__x - 1) * 0x200 - __y * 0x1)
@@ -1145,14 +1143,14 @@
#define STV090x_Px_SFRINIT1(__x) (0xF45E - (__x - 1) * 0x200)
#define STV090x_P1_SFRINIT1 STV090x_Px_SFRINIT1(1)
#define STV090x_P2_SFRINIT1 STV090x_Px_SFRINIT1(2)
-#define STV090x_OFFST_Px_SFR_INIT_FIELD 0
-#define STV090x_WIDTH_Px_SFR_INIT_FIELD 8
+#define STV090x_OFFST_Px_SFR_INIT1_FIELD 0
+#define STV090x_WIDTH_Px_SFR_INIT1_FIELD 7
#define STV090x_Px_SFRINIT0(__x) (0xF45F - (__x - 1) * 0x200)
#define STV090x_P1_SFRINIT0 STV090x_Px_SFRINIT0(1)
#define STV090x_P2_SFRINIT0 STV090x_Px_SFRINIT0(2)
-#define STV090x_OFFST_Px_SFR_INIT_FIELD 0
-#define STV090x_WIDTH_Px_SFR_INIT_FIELD 8
+#define STV090x_OFFST_Px_SFR_INIT0_FIELD 0
+#define STV090x_WIDTH_Px_SFR_INIT0_FIELD 8
#define STV090x_Px_SFRUP1(__x) (0xF460 - (__x - 1) * 0x200)
#define STV090x_P1_SFRUP1 STV090x_Px_SFRUP1(1)
@@ -1178,7 +1176,7 @@
#define STV090x_OFFST_Px_SYMB_FREQ_LOW0_FIELD 0
#define STV090x_WIDTH_Px_SYMB_FREQ_LOW0_FIELD 8
-#define STV090x_Px_SFRy(__x, __y) (0xF464 - (__x-1) * 0x200 + (3 - __y))
+#define STV090x_Px_SFRy(__x, __y) (0xF467 - (__x-1) * 0x200 - __y)
#define STV090x_P1_SFR0 STV090x_Px_SFRy(1, 0)
#define STV090x_P1_SFR1 STV090x_Px_SFRy(1, 1)
#define STV090x_P1_SFR2 STV090x_Px_SFRy(1, 2)
@@ -1188,7 +1186,7 @@
#define STV090x_P2_SFR2 STV090x_Px_SFRy(2, 2)
#define STV090x_P2_SFR3 STV090x_Px_SFRy(2, 3)
#define STV090x_OFFST_Px_SYMB_FREQ_FIELD 0
-#define STV090x_WIDTH_Px_SYMB_FREQ_FIELD 32
+#define STV090x_WIDTH_Px_SYMB_FREQ_FIELD 8
#define STV090x_Px_TMGREG2(__x) (0xF468 - (__x - 1) * 0x200)
#define STV090x_P1_TMGREG2 STV090x_Px_TMGREG2(1)
@@ -1198,7 +1196,7 @@
#define STV090x_Px_TMGREG1(__x) (0xF469 - (__x - 1) * 0x200)
#define STV090x_P1_TMGREG1 STV090x_Px_TMGREG1(1)
-#define STV090x_P2_TMGREG1 STV090x_Px_TMGREG1(2)
+#define STV090x_P2_TMGREG1 STV090x_Px_TMGREG1(2)
#define STV090x_OFFST_Px_TMGREG_FIELD 0
#define STV090x_WIDTH_Px_TMGREG_FIELD 8
@@ -1230,7 +1228,7 @@
#define STV090x_OFFST_Px_MU_EQUALDFE_FIELD 0
#define STV090x_WIDTH_Px_MU_EQUALDFE_FIELD 3
-#define STV090x_Px_EQUAIy(__x, __y) (0xf470 - (__x - 1) * 0x200 + (__y - 1))
+#define STV090x_Px_EQUAIy(__x, __y) (0xf470 - (__x-1) * 0x200 + 2 * (__y-1))
#define STV090x_P1_EQUAI1 STV090x_Px_EQUAIy(1, 1)
#define STV090x_P1_EQUAI2 STV090x_Px_EQUAIy(1, 2)
#define STV090x_P1_EQUAI3 STV090x_Px_EQUAIy(1, 3)
@@ -1251,7 +1249,7 @@
#define STV090x_OFFST_Px_EQUA_ACCIy_FIELD 0
#define STV090x_WIDTH_Px_EQUA_ACCIy_FIELD 8
-#define STV090x_Px_EQUAQy(__x, __y) (0xf471 - (__x - 1) * 0x200 + (__y - 1))
+#define STV090x_Px_EQUAQy(__x, __y) (0xf471 - (__x-1) * 0x200 + 2 * (__y-1))
#define STV090x_P1_EQUAQ1 STV090x_Px_EQUAQy(1, 1)
#define STV090x_P1_EQUAQ2 STV090x_Px_EQUAQy(1, 2)
#define STV090x_P1_EQUAQ3 STV090x_Px_EQUAQy(1, 3)
@@ -1390,7 +1388,7 @@
#define STV090x_OFFST_Px_CAR2S2_16A_ALPH_E_FIELD 0
#define STV090x_WIDTH_Px_CAR2S2_16A_ALPH_E_FIELD 4
-#define STV090x_Px_ACLC2S232A(__x) (0xf499 - (__x - 1) * 0x200)
+#define STV090x_Px_ACLC2S232A(__x) (0xf49A - (__x - 1) * 0x200)
#define STV090x_P1_ACLC2S232A STV090x_Px_ACLC2S232A(1)
#define STV090x_P2_ACLC2S232A STV090x_Px_ACLC2S232A(2)
#define STV090x_OFFST_Px_CAR2S2_32A_ALPH_M_FIELD 4
@@ -1414,7 +1412,7 @@
#define STV090x_OFFST_Px_CAR2S2_8_BETA_E_FIELD 0
#define STV090x_WIDTH_Px_CAR2S2_8_BETA_E_FIELD 4
-#define STV090x_Px_BCLC2S216A(__x) (0xf49d - (__x - 1) * 0x200)
+#define STV090x_Px_BCLC2S216A(__x) (0xf49e - (__x - 1) * 0x200)
#define STV090x_P1_BCLC2S216A STV090x_Px_BCLC2S216A(1)
#define STV090x_P2_BCLC2S216A STV090x_Px_BCLC2S216A(1)
#define STV090x_OFFST_Px_CAR2S2_16A_BETA_M_FIELD 4
@@ -1422,7 +1420,7 @@
#define STV090x_OFFST_Px_CAR2S2_16A_BETA_E_FIELD 0
#define STV090x_WIDTH_Px_CAR2S2_16A_BETA_E_FIELD 4
-#define STV090x_Px_BCLC2S232A(__x) (0xf49d - (__x - 1) * 0x200)
+#define STV090x_Px_BCLC2S232A(__x) (0xf49f - (__x - 1) * 0x200)
#define STV090x_P1_BCLC2S232A STV090x_Px_BCLC2S232A(1)
#define STV090x_P2_BCLC2S232A STV090x_Px_BCLC2S232A(1)
#define STV090x_OFFST_Px_CAR2S2_32A_BETA_M_FIELD 4
@@ -1458,7 +1456,7 @@
#define STV090x_P1_MODCODLST1 STV090x_Px_MODCODLST1(1)
#define STV090x_P2_MODCODLST1 STV090x_Px_MODCODLST1(2)
#define STV090x_OFFST_Px_DIS_MODCOD29_FIELD 4
-#define STV090x_WIDTH_Px_DIS_MODCOD29T_FIELD 4
+#define STV090x_WIDTH_Px_DIS_MODCOD29_FIELD 4
#define STV090x_OFFST_Px_DIS_32PSK_9_10_FIELD 0
#define STV090x_WIDTH_Px_DIS_32PSK_9_10_FIELD 4
@@ -2180,7 +2178,7 @@
#define STV090x_WIDTH_Px_TSFIFOSPEED_STORE_FIELD 1
#define STV090x_OFFST_Px_DILXX_RESET_FIELD 5
#define STV090x_WIDTH_Px_DILXX_RESET_FIELD 1
-#define STV090x_OFFST_Px_TSSERIAL_IMPOS_FIELD 5
+#define STV090x_OFFST_Px_TSSERIAL_IMPOS_FIELD 4
#define STV090x_WIDTH_Px_TSSERIAL_IMPOS_FIELD 1
#define STV090x_OFFST_Px_SCRAMBDETECT_FIELD 1
#define STV090x_WIDTH_Px_SCRAMBDETECT_FIELD 1
@@ -2190,7 +2188,7 @@
#define STV090x_P1_TSBITRATE1 STV090x_Px_TSBITRATEy(1, 1)
#define STV090x_P2_TSBITRATE0 STV090x_Px_TSBITRATEy(2, 0)
#define STV090x_P2_TSBITRATE1 STV090x_Px_TSBITRATEy(2, 1)
-#define STV090x_OFFST_Px_TSFIFO_BITRATE_FIELD 7
+#define STV090x_OFFST_Px_TSFIFO_BITRATE_FIELD 0
#define STV090x_WIDTH_Px_TSFIFO_BITRATE_FIELD 8
#define STV090x_Px_ERRCTRL1(__x) (0xF598 - (__x - 1) * 0x200)
diff --git a/drivers/media/dvb/frontends/stv6110.c b/drivers/media/dvb/frontends/stv6110.c
index dcf1b21..bef0cc8 100644
--- a/drivers/media/dvb/frontends/stv6110.c
+++ b/drivers/media/dvb/frontends/stv6110.c
@@ -37,6 +37,7 @@
u32 mclk;
u8 clk_div;
+ u8 gain;
u8 regs[8];
};
@@ -255,7 +256,7 @@
u8 ret = 0x04;
u32 divider, ref, p, presc, i, result_freq, vco_freq;
s32 p_calc, p_calc_opt = 1000, r_div, r_div_opt = 0, p_val;
- s32 srate; u8 gain;
+ s32 srate;
dprintk("%s, freq=%d kHz, mclk=%d Hz\n", __func__,
frequency, priv->mclk);
@@ -273,15 +274,8 @@
} else
srate = 15000000;
- if (srate >= 15000000)
- gain = 3; /* +6 dB */
- else if (srate >= 5000000)
- gain = 3; /* +6 dB */
- else
- gain = 3; /* +6 dB */
-
priv->regs[RSTV6110_CTRL2] &= ~0x0f;
- priv->regs[RSTV6110_CTRL2] |= (gain & 0x0f);
+ priv->regs[RSTV6110_CTRL2] |= (priv->gain & 0x0f);
if (frequency <= 1023000) {
p = 1;
@@ -436,6 +430,7 @@
priv->i2c = i2c;
priv->mclk = config->mclk;
priv->clk_div = config->clk_div;
+ priv->gain = config->gain;
memcpy(&priv->regs, ®0[1], 8);
diff --git a/drivers/media/dvb/frontends/stv6110.h b/drivers/media/dvb/frontends/stv6110.h
index 9db2402..fe71bba 100644
--- a/drivers/media/dvb/frontends/stv6110.h
+++ b/drivers/media/dvb/frontends/stv6110.h
@@ -41,6 +41,7 @@
struct stv6110_config {
u8 i2c_address;
u32 mclk;
+ u8 gain;
u8 clk_div; /* divisor value for the output clock */
};
diff --git a/drivers/media/dvb/frontends/stv6110x.c b/drivers/media/dvb/frontends/stv6110x.c
index 3d8a2e0..bcfcb65 100644
--- a/drivers/media/dvb/frontends/stv6110x.c
+++ b/drivers/media/dvb/frontends/stv6110x.c
@@ -95,7 +95,7 @@
{
struct stv6110x_state *stv6110x = fe->tuner_priv;
u32 rDiv, divider;
- s32 pVal, pCalc, rDivOpt = 0;
+ s32 pVal, pCalc, rDivOpt = 0, pCalcOpt = 1000;
u8 i;
STV6110x_SETFIELD(stv6110x_regs[STV6110x_CTRL1], CTRL1_K, (REFCLOCK_MHz - 16));
@@ -121,8 +121,10 @@
for (rDiv = 0; rDiv <= 3; rDiv++) {
pCalc = (REFCLOCK_kHz / 100) / R_DIV(rDiv);
- if ((abs((s32)(pCalc - pVal))) < (abs((s32)(1000 - pVal))))
+ if ((abs((s32)(pCalc - pVal))) < (abs((s32)(pCalcOpt - pVal))))
rDivOpt = rDiv;
+
+ pCalcOpt = (REFCLOCK_kHz / 100) / R_DIV(rDivOpt);
}
divider = (frequency * R_DIV(rDivOpt) * pVal) / REFCLOCK_kHz;
diff --git a/drivers/media/dvb/pt1/pt1.c b/drivers/media/dvb/pt1/pt1.c
index 1fd8306..81e623a 100644
--- a/drivers/media/dvb/pt1/pt1.c
+++ b/drivers/media/dvb/pt1/pt1.c
@@ -27,7 +27,6 @@
#include <linux/pci.h>
#include <linux/kthread.h>
#include <linux/freezer.h>
-#include <linux/vmalloc.h>
#include "dvbdev.h"
#include "dvb_demux.h"
diff --git a/drivers/media/dvb/pt1/va1j5jf8007s.c b/drivers/media/dvb/pt1/va1j5jf8007s.c
index 2db940f..fc65949 100644
--- a/drivers/media/dvb/pt1/va1j5jf8007s.c
+++ b/drivers/media/dvb/pt1/va1j5jf8007s.c
@@ -48,6 +48,60 @@
enum va1j5jf8007s_tune_state tune_state;
};
+static int va1j5jf8007s_read_snr(struct dvb_frontend *fe, u16 *snr)
+{
+ struct va1j5jf8007s_state *state;
+ u8 addr;
+ int i;
+ u8 write_buf[1], read_buf[1];
+ struct i2c_msg msgs[2];
+ s32 word, x1, x2, x3, x4, x5, y;
+
+ state = fe->demodulator_priv;
+ addr = state->config->demod_address;
+
+ word = 0;
+ for (i = 0; i < 2; i++) {
+ write_buf[0] = 0xbc + i;
+
+ msgs[0].addr = addr;
+ msgs[0].flags = 0;
+ msgs[0].len = sizeof(write_buf);
+ msgs[0].buf = write_buf;
+
+ msgs[1].addr = addr;
+ msgs[1].flags = I2C_M_RD;
+ msgs[1].len = sizeof(read_buf);
+ msgs[1].buf = read_buf;
+
+ if (i2c_transfer(state->adap, msgs, 2) != 2)
+ return -EREMOTEIO;
+
+ word <<= 8;
+ word |= read_buf[0];
+ }
+
+ word -= 3000;
+ if (word < 0)
+ word = 0;
+
+ x1 = int_sqrt(word << 16) * ((15625ll << 21) / 1000000);
+ x2 = (s64)x1 * x1 >> 31;
+ x3 = (s64)x2 * x1 >> 31;
+ x4 = (s64)x2 * x2 >> 31;
+ x5 = (s64)x4 * x1 >> 31;
+
+ y = (58857ll << 23) / 1000;
+ y -= (s64)x1 * ((89565ll << 24) / 1000) >> 30;
+ y += (s64)x2 * ((88977ll << 24) / 1000) >> 28;
+ y -= (s64)x3 * ((50259ll << 25) / 1000) >> 27;
+ y += (s64)x4 * ((14341ll << 27) / 1000) >> 27;
+ y -= (s64)x5 * ((16346ll << 30) / 10000) >> 28;
+
+ *snr = y < 0 ? 0 : y >> 15;
+ return 0;
+}
+
static int va1j5jf8007s_get_frontend_algo(struct dvb_frontend *fe)
{
return DVBFE_ALGO_HW;
@@ -337,7 +391,7 @@
{
struct va1j5jf8007s_state *state;
int ret;
- int lock;
+ int lock = 0;
state = fe->demodulator_priv;
@@ -536,6 +590,7 @@
FE_CAN_GUARD_INTERVAL_AUTO | FE_CAN_HIERARCHY_AUTO,
},
+ .read_snr = va1j5jf8007s_read_snr,
.get_frontend_algo = va1j5jf8007s_get_frontend_algo,
.read_status = va1j5jf8007s_read_status,
.tune = va1j5jf8007s_tune,
diff --git a/drivers/media/dvb/pt1/va1j5jf8007t.c b/drivers/media/dvb/pt1/va1j5jf8007t.c
index 71117f4..3db4f3e3 100644
--- a/drivers/media/dvb/pt1/va1j5jf8007t.c
+++ b/drivers/media/dvb/pt1/va1j5jf8007t.c
@@ -46,6 +46,52 @@
enum va1j5jf8007t_tune_state tune_state;
};
+static int va1j5jf8007t_read_snr(struct dvb_frontend *fe, u16 *snr)
+{
+ struct va1j5jf8007t_state *state;
+ u8 addr;
+ int i;
+ u8 write_buf[1], read_buf[1];
+ struct i2c_msg msgs[2];
+ s32 word, x, y;
+
+ state = fe->demodulator_priv;
+ addr = state->config->demod_address;
+
+ word = 0;
+ for (i = 0; i < 3; i++) {
+ write_buf[0] = 0x8b + i;
+
+ msgs[0].addr = addr;
+ msgs[0].flags = 0;
+ msgs[0].len = sizeof(write_buf);
+ msgs[0].buf = write_buf;
+
+ msgs[1].addr = addr;
+ msgs[1].flags = I2C_M_RD;
+ msgs[1].len = sizeof(read_buf);
+ msgs[1].buf = read_buf;
+
+ if (i2c_transfer(state->adap, msgs, 2) != 2)
+ return -EREMOTEIO;
+
+ word <<= 8;
+ word |= read_buf[0];
+ }
+
+ if (!word)
+ return -EIO;
+
+ x = 10 * (intlog10(0x540000 * 100 / word) - (2 << 24));
+ y = (24ll << 46) / 1000000;
+ y = ((s64)y * x >> 30) - (16ll << 40) / 10000;
+ y = ((s64)y * x >> 29) + (398ll << 35) / 10000;
+ y = ((s64)y * x >> 30) + (5491ll << 29) / 10000;
+ y = ((s64)y * x >> 30) + (30965ll << 23) / 10000;
+ *snr = y >> 15;
+ return 0;
+}
+
static int va1j5jf8007t_get_frontend_algo(struct dvb_frontend *fe)
{
return DVBFE_ALGO_HW;
@@ -224,7 +270,7 @@
{
struct va1j5jf8007t_state *state;
int ret;
- int lock, retry;
+ int lock = 0, retry = 0;
state = fe->demodulator_priv;
@@ -393,6 +439,7 @@
FE_CAN_GUARD_INTERVAL_AUTO | FE_CAN_HIERARCHY_AUTO,
},
+ .read_snr = va1j5jf8007t_read_snr,
.get_frontend_algo = va1j5jf8007t_get_frontend_algo,
.read_status = va1j5jf8007t_read_status,
.tune = va1j5jf8007t_tune,
diff --git a/drivers/media/dvb/siano/sms-cards.c b/drivers/media/dvb/siano/sms-cards.c
index 0420e28..1067b22 100644
--- a/drivers/media/dvb/siano/sms-cards.c
+++ b/drivers/media/dvb/siano/sms-cards.c
@@ -97,7 +97,7 @@
},
};
-struct sms_board *sms_get_board(int id)
+struct sms_board *sms_get_board(unsigned id)
{
BUG_ON(id >= ARRAY_SIZE(sms_boards));
@@ -294,6 +294,8 @@
case SMS1XXX_BOARD_HAUPPAUGE_OKEMO_A:
case SMS1XXX_BOARD_HAUPPAUGE_OKEMO_B:
case SMS1XXX_BOARD_HAUPPAUGE_WINDHAM:
+ case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD:
+ case SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD_R2:
request_module("smsdvb");
break;
default:
diff --git a/drivers/media/dvb/siano/sms-cards.h b/drivers/media/dvb/siano/sms-cards.h
index 38f062f..8f19fc0 100644
--- a/drivers/media/dvb/siano/sms-cards.h
+++ b/drivers/media/dvb/siano/sms-cards.h
@@ -81,7 +81,7 @@
int led_power, led_hi, led_lo, lna_ctrl, rf_switch;
};
-struct sms_board *sms_get_board(int id);
+struct sms_board *sms_get_board(unsigned id);
extern struct smscore_device_t *coredev;
diff --git a/drivers/media/dvb/siano/smscoreapi.c b/drivers/media/dvb/siano/smscoreapi.c
index fa6a623..ca758bc 100644
--- a/drivers/media/dvb/siano/smscoreapi.c
+++ b/drivers/media/dvb/siano/smscoreapi.c
@@ -1373,7 +1373,7 @@
*pGroupCfg = 1;
- if (PinNum >= 0 && PinNum <= 1) {
+ if (PinNum <= 1) {
*pTranslatedPinNum = 0;
*pGroupNum = 9;
*pGroupCfg = 2;
diff --git a/drivers/media/dvb/siano/smssdio.c b/drivers/media/dvb/siano/smssdio.c
index d1d652e..24206cb 100644
--- a/drivers/media/dvb/siano/smssdio.c
+++ b/drivers/media/dvb/siano/smssdio.c
@@ -78,7 +78,7 @@
static int smssdio_sendrequest(void *context, void *buffer, size_t size)
{
- int ret;
+ int ret = 0;
struct smssdio_device *smsdev;
smsdev = context;
diff --git a/drivers/media/dvb/ttpci/av7110.c b/drivers/media/dvb/ttpci/av7110.c
index 8d65c65..baf3159 100644
--- a/drivers/media/dvb/ttpci/av7110.c
+++ b/drivers/media/dvb/ttpci/av7110.c
@@ -2425,7 +2425,7 @@
* use 0x15 to track VPE interrupts - increase by 1 every vpeirq() is called
*/
saa7146_write(dev, EC1SSR, (0x03<<2) | 3 );
- /* set event counter 1 treshold to maximum allowed value (rEC p55) */
+ /* set event counter 1 threshold to maximum allowed value (rEC p55) */
saa7146_write(dev, ECT1R, 0x3fff );
#endif
/* Set RPS1 Address register to point to RPS code (r108 p42) */
@@ -2559,7 +2559,7 @@
* use 0x15 to track VPE interrupts - increase by 1 every vpeirq() is called
*/
saa7146_write(dev, EC1SSR, (0x03<<2) | 3 );
- /* set event counter 1 treshold to maximum allowed value (rEC p55) */
+ /* set event counter 1 threshold to maximum allowed value (rEC p55) */
saa7146_write(dev, ECT1R, 0x3fff );
#endif
/* Setup BUDGETPATCH MAIN RPS1 "program" (p35) */
diff --git a/drivers/media/dvb/ttpci/budget-av.c b/drivers/media/dvb/ttpci/budget-av.c
index 8ea9152..983672a 100644
--- a/drivers/media/dvb/ttpci/budget-av.c
+++ b/drivers/media/dvb/ttpci/budget-av.c
@@ -1055,7 +1055,7 @@
{ STB0899_TSCFGH , 0x0c },
{ STB0899_TSCFGM , 0x00 },
{ STB0899_TSCFGL , 0x0c },
- { STB0899_TSOUT , 0x0d }, /* 0x0d for CAM */
+ { STB0899_TSOUT , 0x4d }, /* 0x0d for CAM */
{ STB0899_RSSYNCDEL , 0x00 },
{ STB0899_TSINHDELH , 0x02 },
{ STB0899_TSINHDELM , 0x00 },
diff --git a/drivers/media/dvb/ttpci/budget-ci.c b/drivers/media/dvb/ttpci/budget-ci.c
index b5c6813..7d193eb 100644
--- a/drivers/media/dvb/ttpci/budget-ci.c
+++ b/drivers/media/dvb/ttpci/budget-ci.c
@@ -178,7 +178,7 @@
if (budget_ci->ir.last_raw != raw || !timer_pending(&budget_ci->ir.timer_keyup)) {
ir_input_nokey(dev, &budget_ci->ir.state);
ir_input_keydown(dev, &budget_ci->ir.state,
- budget_ci->ir.ir_key, raw);
+ budget_ci->ir.ir_key);
budget_ci->ir.last_raw = raw;
}
@@ -224,8 +224,10 @@
case 0x1011:
case 0x1012:
/* The hauppauge keymap is a superset of these remotes */
- ir_input_init(input_dev, &budget_ci->ir.state,
+ error = ir_input_init(input_dev, &budget_ci->ir.state,
IR_TYPE_RC5, &ir_codes_hauppauge_new_table);
+ if (error < 0)
+ goto out2;
if (rc5_device < 0)
budget_ci->ir.rc5_device = 0x1f;
@@ -236,8 +238,10 @@
case 0x1017:
case 0x101a:
/* for the Technotrend 1500 bundled remote */
- ir_input_init(input_dev, &budget_ci->ir.state,
+ error = ir_input_init(input_dev, &budget_ci->ir.state,
IR_TYPE_RC5, &ir_codes_tt_1500_table);
+ if (error < 0)
+ goto out2;
if (rc5_device < 0)
budget_ci->ir.rc5_device = IR_DEVICE_ANY;
@@ -246,8 +250,10 @@
break;
default:
/* unknown remote */
- ir_input_init(input_dev, &budget_ci->ir.state,
+ error = ir_input_init(input_dev, &budget_ci->ir.state,
IR_TYPE_RC5, &ir_codes_budget_ci_old_table);
+ if (error < 0)
+ goto out2;
if (rc5_device < 0)
budget_ci->ir.rc5_device = IR_DEVICE_ANY;
@@ -280,6 +286,7 @@
return 0;
out2:
+ ir_input_free(input_dev);
input_free_device(input_dev);
out1:
return error;
@@ -297,6 +304,7 @@
del_timer_sync(&dev->timer);
ir_input_nokey(dev, &budget_ci->ir.state);
+ ir_input_free(dev);
input_unregister_device(dev);
}
@@ -1248,7 +1256,7 @@
{ STB0899_TSCFGH , 0x0c },
{ STB0899_TSCFGM , 0x00 },
{ STB0899_TSCFGL , 0x0c },
- { STB0899_TSOUT , 0x0d }, /* 0x0d for CAM */
+ { STB0899_TSOUT , 0x4d }, /* 0x0d for CAM */
{ STB0899_RSSYNCDEL , 0x00 },
{ STB0899_TSINHDELH , 0x02 },
{ STB0899_TSINHDELM , 0x00 },
diff --git a/drivers/media/dvb/ttpci/budget-patch.c b/drivers/media/dvb/ttpci/budget-patch.c
index 60136688..9c92f9d 100644
--- a/drivers/media/dvb/ttpci/budget-patch.c
+++ b/drivers/media/dvb/ttpci/budget-patch.c
@@ -456,7 +456,7 @@
// use 0x03 to track RPS1 interrupts - increase by 1 every gpio3 is toggled
// use 0x15 to track VPE interrupts - increase by 1 every vpeirq() is called
saa7146_write(dev, EC1SSR, (0x03<<2) | 3 );
- // set event counter 1 treshold to maximum allowed value (rEC p55)
+ // set event counter 1 threshold to maximum allowed value (rEC p55)
saa7146_write(dev, ECT1R, 0x3fff );
#endif
// Fix VSYNC level
diff --git a/drivers/media/dvb/ttusb-dec/ttusb_dec.c b/drivers/media/dvb/ttusb-dec/ttusb_dec.c
index d91e063..53baccb 100644
--- a/drivers/media/dvb/ttusb-dec/ttusb_dec.c
+++ b/drivers/media/dvb/ttusb-dec/ttusb_dec.c
@@ -1198,7 +1198,7 @@
int err;
usb_make_path(dec->udev, dec->rc_phys, sizeof(dec->rc_phys));
- strlcpy(dec->rc_phys, "/input0", sizeof(dec->rc_phys));
+ strlcat(dec->rc_phys, "/input0", sizeof(dec->rc_phys));
input_dev = input_allocate_device();
if (!input_dev)
diff --git a/drivers/media/radio/Kconfig b/drivers/media/radio/Kconfig
index b134553..4c2b8a2 100644
--- a/drivers/media/radio/Kconfig
+++ b/drivers/media/radio/Kconfig
@@ -197,7 +197,8 @@
config RADIO_MIROPCM20
tristate "miroSOUND PCM20 radio"
- depends on ISA && VIDEO_V4L2
+ depends on ISA && VIDEO_V4L2 && SND
+ select SND_ISA
select SND_MIRO
---help---
Choose Y here if you have this FM radio card. You also need to enable
@@ -419,4 +420,16 @@
Say Y here if TEA5764 have a 32768 Hz crystal in circuit, say N
here if TEA5764 reference frequency is connected in FREQIN.
+config RADIO_TEF6862
+ tristate "TEF6862 Car Radio Enhanced Selectivity Tuner"
+ depends on I2C && VIDEO_V4L2
+ ---help---
+ Say Y here if you want to use the TEF6862 Car Radio Enhanced
+ Selectivity Tuner, found for instance on the Russellville development
+ board. On the russellville the device is connected to internal
+ timberdale I2C bus.
+
+ To compile this driver as a module, choose M here: the
+ module will be called TEF6862.
+
endif # RADIO_ADAPTERS
diff --git a/drivers/media/radio/Makefile b/drivers/media/radio/Makefile
index 8a63d54..01922ad 100644
--- a/drivers/media/radio/Makefile
+++ b/drivers/media/radio/Makefile
@@ -23,5 +23,6 @@
obj-$(CONFIG_RADIO_SI470X) += si470x/
obj-$(CONFIG_USB_MR800) += radio-mr800.o
obj-$(CONFIG_RADIO_TEA5764) += radio-tea5764.o
+obj-$(CONFIG_RADIO_TEF6862) += tef6862.o
EXTRA_CFLAGS += -Isound
diff --git a/drivers/media/radio/radio-mr800.c b/drivers/media/radio/radio-mr800.c
index a123908..949f605 100644
--- a/drivers/media/radio/radio-mr800.c
+++ b/drivers/media/radio/radio-mr800.c
@@ -28,7 +28,7 @@
* http://av-usbradio.sourceforge.net/index.php
* http://sourceforge.net/projects/av-usbradio/
* Latest release of theirs project was in 2005.
- * Probably, this driver could be improved trough using their
+ * Probably, this driver could be improved through using their
* achievements (specifications given).
* Also, Faidon Liambotis <paravoid@debian.org> wrote nice driver for this radio
* in 2007. He allowed to use his driver to improve current mr800 radio driver.
@@ -85,6 +85,9 @@
#define amradio_dev_warn(dev, fmt, arg...) \
dev_warn(dev, MR800_DRIVER_NAME " - " fmt, ##arg)
+#define amradio_dev_err(dev, fmt, arg...) \
+ dev_err(dev, MR800_DRIVER_NAME " - " fmt, ##arg)
+
/* Probably USB_TIMEOUT should be modified in module parameter */
#define BUFFER_LENGTH 8
#define USB_TIMEOUT 500
@@ -129,18 +132,20 @@
struct amradio_device {
/* reference to USB and video device */
struct usb_device *usbdev;
- struct video_device *videodev;
+ struct usb_interface *intf;
+ struct video_device videodev;
struct v4l2_device v4l2_dev;
unsigned char *buffer;
struct mutex lock; /* buffer locking */
int curfreq;
int stereo;
- int users;
- int removed;
int muted;
+ int initialized;
};
+#define vdev_to_amradio(r) container_of(r, struct amradio_device, videodev)
+
/* USB Device ID List */
static struct usb_device_id usb_amradio_device_table[] = {
{USB_DEVICE_AND_INTERFACE_INFO(USB_AMRADIO_VENDOR, USB_AMRADIO_PRODUCT,
@@ -159,7 +164,7 @@
.resume = usb_amradio_resume,
.reset_resume = usb_amradio_resume,
.id_table = usb_amradio_device_table,
- .supports_autosuspend = 0,
+ .supports_autosuspend = 1,
};
/* switch on/off the radio. Send 8 bytes to device */
@@ -168,11 +173,7 @@
int retval;
int size;
- /* safety check */
- if (radio->removed)
- return -EIO;
-
- mutex_lock(&radio->lock);
+ BUG_ON(!mutex_is_locked(&radio->lock));
radio->buffer[0] = 0x00;
radio->buffer[1] = 0x55;
@@ -187,14 +188,12 @@
(void *) (radio->buffer), BUFFER_LENGTH, &size, USB_TIMEOUT);
if (retval < 0 || size != BUFFER_LENGTH) {
- mutex_unlock(&radio->lock);
+ amradio_dev_warn(&radio->videodev.dev, "set mute failed\n");
return retval;
}
radio->muted = argument;
- mutex_unlock(&radio->lock);
-
return retval;
}
@@ -205,11 +204,7 @@
int size;
unsigned short freq_send = 0x10 + (freq >> 3) / 25;
- /* safety check */
- if (radio->removed)
- return -EIO;
-
- mutex_lock(&radio->lock);
+ BUG_ON(!mutex_is_locked(&radio->lock));
radio->buffer[0] = 0x00;
radio->buffer[1] = 0x55;
@@ -223,10 +218,8 @@
retval = usb_bulk_msg(radio->usbdev, usb_sndintpipe(radio->usbdev, 2),
(void *) (radio->buffer), BUFFER_LENGTH, &size, USB_TIMEOUT);
- if (retval < 0 || size != BUFFER_LENGTH) {
- mutex_unlock(&radio->lock);
- return retval;
- }
+ if (retval < 0 || size != BUFFER_LENGTH)
+ goto out_err;
/* frequency is calculated from freq_send and placed in first 2 bytes */
radio->buffer[0] = (freq_send >> 8) & 0xff;
@@ -240,13 +233,15 @@
retval = usb_bulk_msg(radio->usbdev, usb_sndintpipe(radio->usbdev, 2),
(void *) (radio->buffer), BUFFER_LENGTH, &size, USB_TIMEOUT);
- if (retval < 0 || size != BUFFER_LENGTH) {
- mutex_unlock(&radio->lock);
- return retval;
- }
+ if (retval < 0 || size != BUFFER_LENGTH)
+ goto out_err;
- mutex_unlock(&radio->lock);
+ radio->curfreq = freq;
+ goto out;
+out_err:
+ amradio_dev_warn(&radio->videodev.dev, "set frequency failed\n");
+out:
return retval;
}
@@ -255,11 +250,7 @@
int retval;
int size;
- /* safety check */
- if (radio->removed)
- return -EIO;
-
- mutex_lock(&radio->lock);
+ BUG_ON(!mutex_is_locked(&radio->lock));
radio->buffer[0] = 0x00;
radio->buffer[1] = 0x55;
@@ -274,14 +265,14 @@
(void *) (radio->buffer), BUFFER_LENGTH, &size, USB_TIMEOUT);
if (retval < 0 || size != BUFFER_LENGTH) {
- radio->stereo = -1;
- mutex_unlock(&radio->lock);
+ amradio_dev_warn(&radio->videodev.dev, "set stereo failed\n");
return retval;
}
- radio->stereo = 1;
-
- mutex_unlock(&radio->lock);
+ if (argument == WANT_STEREO)
+ radio->stereo = 1;
+ else
+ radio->stereo = 0;
return retval;
}
@@ -296,19 +287,19 @@
struct amradio_device *radio = usb_get_intfdata(intf);
mutex_lock(&radio->lock);
- radio->removed = 1;
+ radio->usbdev = NULL;
mutex_unlock(&radio->lock);
usb_set_intfdata(intf, NULL);
- video_unregister_device(radio->videodev);
v4l2_device_disconnect(&radio->v4l2_dev);
+ video_unregister_device(&radio->videodev);
}
/* vidioc_querycap - query device capabilities */
static int vidioc_querycap(struct file *file, void *priv,
struct v4l2_capability *v)
{
- struct amradio_device *radio = video_drvdata(file);
+ struct amradio_device *radio = file->private_data;
strlcpy(v->driver, "radio-mr800", sizeof(v->driver));
strlcpy(v->card, "AverMedia MR 800 USB FM Radio", sizeof(v->card));
@@ -322,13 +313,9 @@
static int vidioc_g_tuner(struct file *file, void *priv,
struct v4l2_tuner *v)
{
- struct amradio_device *radio = video_get_drvdata(video_devdata(file));
+ struct amradio_device *radio = file->private_data;
int retval;
- /* safety check */
- if (radio->removed)
- return -EIO;
-
if (v->index > 0)
return -EINVAL;
@@ -341,9 +328,6 @@
* amradio_set_stereo shouldn't be here
*/
retval = amradio_set_stereo(radio, WANT_STEREO);
- if (retval < 0)
- amradio_dev_warn(&radio->videodev->dev,
- "set stereo failed\n");
strcpy(v->name, "FM");
v->type = V4L2_TUNER_RADIO;
@@ -357,19 +341,16 @@
v->audmode = V4L2_TUNER_MODE_MONO;
v->signal = 0xffff; /* Can't get the signal strength, sad.. */
v->afc = 0; /* Don't know what is this */
- return 0;
+
+ return retval;
}
/* vidioc_s_tuner - set tuner attributes */
static int vidioc_s_tuner(struct file *file, void *priv,
struct v4l2_tuner *v)
{
- struct amradio_device *radio = video_get_drvdata(video_devdata(file));
- int retval;
-
- /* safety check */
- if (radio->removed)
- return -EIO;
+ struct amradio_device *radio = file->private_data;
+ int retval = -EINVAL;
if (v->index > 0)
return -EINVAL;
@@ -378,57 +359,33 @@
switch (v->audmode) {
case V4L2_TUNER_MODE_MONO:
retval = amradio_set_stereo(radio, WANT_MONO);
- if (retval < 0)
- amradio_dev_warn(&radio->videodev->dev,
- "set mono failed\n");
break;
case V4L2_TUNER_MODE_STEREO:
retval = amradio_set_stereo(radio, WANT_STEREO);
- if (retval < 0)
- amradio_dev_warn(&radio->videodev->dev,
- "set stereo failed\n");
break;
- default:
- return -EINVAL;
}
- return 0;
+ return retval;
}
/* vidioc_s_frequency - set tuner radio frequency */
static int vidioc_s_frequency(struct file *file, void *priv,
struct v4l2_frequency *f)
{
- struct amradio_device *radio = video_get_drvdata(video_devdata(file));
- int retval;
+ struct amradio_device *radio = file->private_data;
- /* safety check */
- if (radio->removed)
- return -EIO;
-
- mutex_lock(&radio->lock);
- radio->curfreq = f->frequency;
- mutex_unlock(&radio->lock);
-
- retval = amradio_setfreq(radio, radio->curfreq);
- if (retval < 0)
- amradio_dev_warn(&radio->videodev->dev,
- "set frequency failed\n");
- return 0;
+ return amradio_setfreq(radio, f->frequency);
}
/* vidioc_g_frequency - get tuner radio frequency */
static int vidioc_g_frequency(struct file *file, void *priv,
struct v4l2_frequency *f)
{
- struct amradio_device *radio = video_get_drvdata(video_devdata(file));
-
- /* safety check */
- if (radio->removed)
- return -EIO;
+ struct amradio_device *radio = file->private_data;
f->type = V4L2_TUNER_RADIO;
f->frequency = radio->curfreq;
+
return 0;
}
@@ -448,17 +405,14 @@
static int vidioc_g_ctrl(struct file *file, void *priv,
struct v4l2_control *ctrl)
{
- struct amradio_device *radio = video_get_drvdata(video_devdata(file));
-
- /* safety check */
- if (radio->removed)
- return -EIO;
+ struct amradio_device *radio = file->private_data;
switch (ctrl->id) {
case V4L2_CID_AUDIO_MUTE:
ctrl->value = radio->muted;
return 0;
}
+
return -EINVAL;
}
@@ -466,33 +420,20 @@
static int vidioc_s_ctrl(struct file *file, void *priv,
struct v4l2_control *ctrl)
{
- struct amradio_device *radio = video_get_drvdata(video_devdata(file));
- int retval;
-
- /* safety check */
- if (radio->removed)
- return -EIO;
+ struct amradio_device *radio = file->private_data;
+ int retval = -EINVAL;
switch (ctrl->id) {
case V4L2_CID_AUDIO_MUTE:
- if (ctrl->value) {
+ if (ctrl->value)
retval = amradio_set_mute(radio, AMRADIO_STOP);
- if (retval < 0) {
- amradio_dev_warn(&radio->videodev->dev,
- "amradio_stop failed\n");
- return -1;
- }
- } else {
+ else
retval = amradio_set_mute(radio, AMRADIO_START);
- if (retval < 0) {
- amradio_dev_warn(&radio->videodev->dev,
- "amradio_start failed\n");
- return -1;
- }
- }
- return 0;
+
+ break;
}
- return -EINVAL;
+
+ return retval;
}
/* vidioc_g_audio - get audio attributes */
@@ -531,75 +472,108 @@
return 0;
}
+static int usb_amradio_init(struct amradio_device *radio)
+{
+ int retval;
+
+ retval = amradio_set_mute(radio, AMRADIO_STOP);
+ if (retval)
+ goto out_err;
+
+ retval = amradio_set_stereo(radio, WANT_STEREO);
+ if (retval)
+ goto out_err;
+
+ radio->initialized = 1;
+ goto out;
+
+out_err:
+ amradio_dev_err(&radio->videodev.dev, "initialization failed\n");
+out:
+ return retval;
+}
+
/* open device - amradio_start() and amradio_setfreq() */
static int usb_amradio_open(struct file *file)
{
- struct amradio_device *radio = video_get_drvdata(video_devdata(file));
- int retval;
+ struct amradio_device *radio = vdev_to_amradio(video_devdata(file));
+ int retval = 0;
- lock_kernel();
+ mutex_lock(&radio->lock);
- radio->users = 1;
- radio->muted = 1;
-
- retval = amradio_set_mute(radio, AMRADIO_START);
- if (retval < 0) {
- amradio_dev_warn(&radio->videodev->dev,
- "radio did not start up properly\n");
- radio->users = 0;
- unlock_kernel();
- return -EIO;
+ if (!radio->usbdev) {
+ retval = -EIO;
+ goto unlock;
}
- retval = amradio_set_stereo(radio, WANT_STEREO);
- if (retval < 0)
- amradio_dev_warn(&radio->videodev->dev,
- "set stereo failed\n");
+ file->private_data = radio;
+ retval = usb_autopm_get_interface(radio->intf);
+ if (retval)
+ goto unlock;
- retval = amradio_setfreq(radio, radio->curfreq);
- if (retval < 0)
- amradio_dev_warn(&radio->videodev->dev,
- "set frequency failed\n");
+ if (unlikely(!radio->initialized)) {
+ retval = usb_amradio_init(radio);
+ if (retval)
+ usb_autopm_put_interface(radio->intf);
+ }
- unlock_kernel();
- return 0;
+unlock:
+ mutex_unlock(&radio->lock);
+ return retval;
}
/*close device */
static int usb_amradio_close(struct file *file)
{
- struct amradio_device *radio = video_get_drvdata(video_devdata(file));
- int retval;
-
- if (!radio)
- return -ENODEV;
+ struct amradio_device *radio = file->private_data;
+ int retval = 0;
mutex_lock(&radio->lock);
- radio->users = 0;
- mutex_unlock(&radio->lock);
- if (!radio->removed) {
- retval = amradio_set_mute(radio, AMRADIO_STOP);
- if (retval < 0)
- amradio_dev_warn(&radio->videodev->dev,
- "amradio_stop failed\n");
+ if (!radio->usbdev)
+ retval = -EIO;
+ else
+ usb_autopm_put_interface(radio->intf);
+
+ mutex_unlock(&radio->lock);
+ return retval;
+}
+
+static long usb_amradio_ioctl(struct file *file, unsigned int cmd,
+ unsigned long arg)
+{
+ struct amradio_device *radio = file->private_data;
+ long retval = 0;
+
+ mutex_lock(&radio->lock);
+
+ if (!radio->usbdev) {
+ retval = -EIO;
+ goto unlock;
}
- return 0;
+ retval = video_ioctl2(file, cmd, arg);
+
+unlock:
+ mutex_unlock(&radio->lock);
+ return retval;
}
/* Suspend device - stop device. Need to be checked and fixed */
static int usb_amradio_suspend(struct usb_interface *intf, pm_message_t message)
{
struct amradio_device *radio = usb_get_intfdata(intf);
- int retval;
- retval = amradio_set_mute(radio, AMRADIO_STOP);
- if (retval < 0)
- dev_warn(&intf->dev, "amradio_stop failed\n");
+ mutex_lock(&radio->lock);
+
+ if (!radio->muted && radio->initialized) {
+ amradio_set_mute(radio, AMRADIO_STOP);
+ radio->muted = 0;
+ }
dev_info(&intf->dev, "going into suspend..\n");
+ mutex_unlock(&radio->lock);
return 0;
}
@@ -607,14 +581,26 @@
static int usb_amradio_resume(struct usb_interface *intf)
{
struct amradio_device *radio = usb_get_intfdata(intf);
- int retval;
- retval = amradio_set_mute(radio, AMRADIO_START);
- if (retval < 0)
- dev_warn(&intf->dev, "amradio_start failed\n");
+ mutex_lock(&radio->lock);
+ if (unlikely(!radio->initialized))
+ goto unlock;
+
+ if (radio->stereo)
+ amradio_set_stereo(radio, WANT_STEREO);
+ else
+ amradio_set_stereo(radio, WANT_MONO);
+
+ amradio_setfreq(radio, radio->curfreq);
+
+ if (!radio->muted)
+ amradio_set_mute(radio, AMRADIO_START);
+
+unlock:
dev_info(&intf->dev, "coming out of suspend..\n");
+ mutex_unlock(&radio->lock);
return 0;
}
@@ -623,7 +609,7 @@
.owner = THIS_MODULE,
.open = usb_amradio_open,
.release = usb_amradio_close,
- .ioctl = video_ioctl2,
+ .ioctl = usb_amradio_ioctl,
};
static const struct v4l2_ioctl_ops usb_amradio_ioctl_ops = {
@@ -643,10 +629,7 @@
static void usb_amradio_video_device_release(struct video_device *videodev)
{
- struct amradio_device *radio = video_get_drvdata(videodev);
-
- /* we call v4l to free radio->videodev */
- video_device_release(videodev);
+ struct amradio_device *radio = vdev_to_amradio(videodev);
v4l2_device_unregister(&radio->v4l2_dev);
@@ -660,70 +643,63 @@
const struct usb_device_id *id)
{
struct amradio_device *radio;
- struct v4l2_device *v4l2_dev;
- int retval;
+ int retval = 0;
radio = kzalloc(sizeof(struct amradio_device), GFP_KERNEL);
if (!radio) {
dev_err(&intf->dev, "kmalloc for amradio_device failed\n");
- return -ENOMEM;
+ retval = -ENOMEM;
+ goto err;
}
radio->buffer = kmalloc(BUFFER_LENGTH, GFP_KERNEL);
if (!radio->buffer) {
dev_err(&intf->dev, "kmalloc for radio->buffer failed\n");
- kfree(radio);
- return -ENOMEM;
+ retval = -ENOMEM;
+ goto err_nobuf;
}
- v4l2_dev = &radio->v4l2_dev;
- retval = v4l2_device_register(&intf->dev, v4l2_dev);
+ retval = v4l2_device_register(&intf->dev, &radio->v4l2_dev);
if (retval < 0) {
dev_err(&intf->dev, "couldn't register v4l2_device\n");
- kfree(radio->buffer);
- kfree(radio);
- return retval;
+ goto err_v4l2;
}
- radio->videodev = video_device_alloc();
+ strlcpy(radio->videodev.name, radio->v4l2_dev.name,
+ sizeof(radio->videodev.name));
+ radio->videodev.v4l2_dev = &radio->v4l2_dev;
+ radio->videodev.fops = &usb_amradio_fops;
+ radio->videodev.ioctl_ops = &usb_amradio_ioctl_ops;
+ radio->videodev.release = usb_amradio_video_device_release;
- if (!radio->videodev) {
- dev_err(&intf->dev, "video_device_alloc failed\n");
- kfree(radio->buffer);
- kfree(radio);
- return -ENOMEM;
- }
-
- strlcpy(radio->videodev->name, v4l2_dev->name, sizeof(radio->videodev->name));
- radio->videodev->v4l2_dev = v4l2_dev;
- radio->videodev->fops = &usb_amradio_fops;
- radio->videodev->ioctl_ops = &usb_amradio_ioctl_ops;
- radio->videodev->release = usb_amradio_video_device_release;
-
- radio->removed = 0;
- radio->users = 0;
radio->usbdev = interface_to_usbdev(intf);
+ radio->intf = intf;
radio->curfreq = 95.16 * FREQ_MUL;
- radio->stereo = -1;
mutex_init(&radio->lock);
- video_set_drvdata(radio->videodev, radio);
+ video_set_drvdata(&radio->videodev, radio);
- retval = video_register_device(radio->videodev, VFL_TYPE_RADIO, radio_nr);
+ retval = video_register_device(&radio->videodev, VFL_TYPE_RADIO,
+ radio_nr);
if (retval < 0) {
dev_err(&intf->dev, "could not register video device\n");
- video_device_release(radio->videodev);
- v4l2_device_unregister(v4l2_dev);
- kfree(radio->buffer);
- kfree(radio);
- return -EIO;
+ goto err_vdev;
}
usb_set_intfdata(intf, radio);
return 0;
+
+err_vdev:
+ v4l2_device_unregister(&radio->v4l2_dev);
+err_v4l2:
+ kfree(radio->buffer);
+err_nobuf:
+ kfree(radio);
+err:
+ return retval;
}
static int __init amradio_init(void)
diff --git a/drivers/media/radio/tef6862.c b/drivers/media/radio/tef6862.c
new file mode 100644
index 0000000..6e607ff
--- /dev/null
+++ b/drivers/media/radio/tef6862.c
@@ -0,0 +1,232 @@
+/*
+ * tef6862.c Philips TEF6862 Car Radio Enhanced Selectivity Tuner
+ * Copyright (c) 2009 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/i2c-id.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-chip-ident.h>
+
+#define DRIVER_NAME "tef6862"
+
+#define FREQ_MUL 16000
+
+#define TEF6862_LO_FREQ (875 * FREQ_MUL / 10)
+#define TEF6862_HI_FREQ (108 * FREQ_MUL)
+
+/* Write mode sub addresses */
+#define WM_SUB_BANDWIDTH 0x0
+#define WM_SUB_PLLM 0x1
+#define WM_SUB_PLLL 0x2
+#define WM_SUB_DAA 0x3
+#define WM_SUB_AGC 0x4
+#define WM_SUB_BAND 0x5
+#define WM_SUB_CONTROL 0x6
+#define WM_SUB_LEVEL 0x7
+#define WM_SUB_IFCF 0x8
+#define WM_SUB_IFCAP 0x9
+#define WM_SUB_ACD 0xA
+#define WM_SUB_TEST 0xF
+
+/* Different modes of the MSA register */
+#define MODE_BUFFER 0x0
+#define MODE_PRESET 0x1
+#define MODE_SEARCH 0x2
+#define MODE_AF_UPDATE 0x3
+#define MODE_JUMP 0x4
+#define MODE_CHECK 0x5
+#define MODE_LOAD 0x6
+#define MODE_END 0x7
+#define MODE_SHIFT 5
+
+struct tef6862_state {
+ struct v4l2_subdev sd;
+ unsigned long freq;
+};
+
+static inline struct tef6862_state *to_state(struct v4l2_subdev *sd)
+{
+ return container_of(sd, struct tef6862_state, sd);
+}
+
+static u16 tef6862_sigstr(struct i2c_client *client)
+{
+ u8 buf[4];
+ int err = i2c_master_recv(client, buf, sizeof(buf));
+ if (err == sizeof(buf))
+ return buf[3] << 8;
+ return 0;
+}
+
+static int tef6862_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *v)
+{
+ if (v->index > 0)
+ return -EINVAL;
+
+ /* only support FM for now */
+ strlcpy(v->name, "FM", sizeof(v->name));
+ v->type = V4L2_TUNER_RADIO;
+ v->rangelow = TEF6862_LO_FREQ;
+ v->rangehigh = TEF6862_HI_FREQ;
+ v->rxsubchans = V4L2_TUNER_SUB_MONO;
+ v->capability = V4L2_TUNER_CAP_LOW;
+ v->audmode = V4L2_TUNER_MODE_STEREO;
+ v->signal = tef6862_sigstr(v4l2_get_subdevdata(sd));
+
+ return 0;
+}
+
+static int tef6862_s_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *v)
+{
+ return v->index ? -EINVAL : 0;
+}
+
+static int tef6862_s_frequency(struct v4l2_subdev *sd, struct v4l2_frequency *f)
+{
+ struct tef6862_state *state = to_state(sd);
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+ u16 pll;
+ u8 i2cmsg[3];
+ int err;
+
+ if (f->tuner != 0)
+ return -EINVAL;
+
+ pll = 1964 + ((f->frequency - TEF6862_LO_FREQ) * 20) / FREQ_MUL;
+ i2cmsg[0] = (MODE_PRESET << MODE_SHIFT) | WM_SUB_PLLM;
+ i2cmsg[1] = (pll >> 8) & 0xff;
+ i2cmsg[2] = pll & 0xff;
+
+ err = i2c_master_send(client, i2cmsg, sizeof(i2cmsg));
+ if (!err)
+ state->freq = f->frequency;
+ return err;
+}
+
+static int tef6862_g_frequency(struct v4l2_subdev *sd, struct v4l2_frequency *f)
+{
+ struct tef6862_state *state = to_state(sd);
+
+ if (f->tuner != 0)
+ return -EINVAL;
+ f->type = V4L2_TUNER_RADIO;
+ f->frequency = state->freq;
+ return 0;
+}
+
+static int tef6862_g_chip_ident(struct v4l2_subdev *sd,
+ struct v4l2_dbg_chip_ident *chip)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+ return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_TEF6862, 0);
+}
+
+static const struct v4l2_subdev_tuner_ops tef6862_tuner_ops = {
+ .g_tuner = tef6862_g_tuner,
+ .s_tuner = tef6862_s_tuner,
+ .s_frequency = tef6862_s_frequency,
+ .g_frequency = tef6862_g_frequency,
+};
+
+static const struct v4l2_subdev_core_ops tef6862_core_ops = {
+ .g_chip_ident = tef6862_g_chip_ident,
+};
+
+static const struct v4l2_subdev_ops tef6862_ops = {
+ .core = &tef6862_core_ops,
+ .tuner = &tef6862_tuner_ops,
+};
+
+/*
+ * Generic i2c probe
+ * concerning the addresses: i2c wants 7 bit (without the r/w bit), so '>>1'
+ */
+
+static int __devinit tef6862_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct tef6862_state *state;
+ struct v4l2_subdev *sd;
+
+ /* Check if the adapter supports the needed features */
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+ return -EIO;
+
+ v4l_info(client, "chip found @ 0x%02x (%s)\n",
+ client->addr << 1, client->adapter->name);
+
+ state = kmalloc(sizeof(struct tef6862_state), GFP_KERNEL);
+ if (state == NULL)
+ return -ENOMEM;
+ state->freq = TEF6862_LO_FREQ;
+
+ sd = &state->sd;
+ v4l2_i2c_subdev_init(sd, client, &tef6862_ops);
+
+ return 0;
+}
+
+static int __devexit tef6862_remove(struct i2c_client *client)
+{
+ struct v4l2_subdev *sd = i2c_get_clientdata(client);
+
+ v4l2_device_unregister_subdev(sd);
+ kfree(to_state(sd));
+ return 0;
+}
+
+static const struct i2c_device_id tef6862_id[] = {
+ {DRIVER_NAME, 0},
+ {},
+};
+
+MODULE_DEVICE_TABLE(i2c, tef6862_id);
+
+static struct i2c_driver tef6862_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = DRIVER_NAME,
+ },
+ .probe = tef6862_probe,
+ .remove = tef6862_remove,
+ .id_table = tef6862_id,
+};
+
+static __init int tef6862_init(void)
+{
+ return i2c_add_driver(&tef6862_driver);
+}
+
+static __exit void tef6862_exit(void)
+{
+ i2c_del_driver(&tef6862_driver);
+}
+
+module_init(tef6862_init);
+module_exit(tef6862_exit);
+
+MODULE_DESCRIPTION("TEF6862 Car Radio Enhanced Selectivity Tuner");
+MODULE_AUTHOR("Mocean Laboratories");
+MODULE_LICENSE("GPL v2");
+
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index e6186b3..9dc74c9 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -600,7 +600,7 @@
config VIDEO_PMS
tristate "Mediavision Pro Movie Studio Video For Linux"
- depends on ISA && VIDEO_V4L1
+ depends on ISA && VIDEO_V4L2
help
Say Y if you have such a thing.
@@ -847,6 +847,12 @@
help
This driver supports MT9V022 cameras from Micron
+config SOC_CAMERA_RJ54N1
+ tristate "rj54n1cb0c support"
+ depends on SOC_CAMERA && I2C
+ help
+ This is a rj54n1cb0c video driver
+
config SOC_CAMERA_TW9910
tristate "tw9910 support"
depends on SOC_CAMERA && I2C
@@ -865,6 +871,12 @@
help
This is a ov772x camera driver
+config SOC_CAMERA_OV9640
+ tristate "ov9640 camera support"
+ depends on SOC_CAMERA && I2C
+ help
+ This is a ov9640 camera driver
+
config MX1_VIDEO
bool
@@ -939,9 +951,14 @@
source "drivers/media/video/et61x251/Kconfig"
config VIDEO_OVCAMCHIP
- tristate "OmniVision Camera Chip support"
+ tristate "OmniVision Camera Chip support (DEPRECATED)"
depends on I2C && VIDEO_V4L1
---help---
+ This driver is DEPRECATED please use the gspca ov519 module
+ instead. Note that for the ov511 / ov518 support of the gspca module
+ you need atleast version 0.6.0 of libv4l and for the w9968cf
+ atleast version 0.6.3 of libv4l.
+
Support for the OmniVision OV6xxx and OV7xxx series of camera chips.
This driver is intended to be used with the ov511 and w9968cf USB
camera drivers.
@@ -950,9 +967,13 @@
module will be called ovcamchip.
config USB_W9968CF
- tristate "USB W996[87]CF JPEG Dual Mode Camera support"
+ tristate "USB W996[87]CF JPEG Dual Mode Camera support (DEPRECATED)"
depends on VIDEO_V4L1 && I2C && VIDEO_OVCAMCHIP
---help---
+ This driver is DEPRECATED please use the gspca ov519 module
+ instead. Note that for the w9968cf support of the gspca module
+ you need atleast version 0.6.3 of libv4l.
+
Say Y here if you want support for cameras based on OV681 or
Winbond W9967CF/W9968CF JPEG USB Dual Mode Camera Chips.
@@ -995,9 +1016,13 @@
source "drivers/media/video/sn9c102/Kconfig"
config USB_STV680
- tristate "USB STV680 (Pencam) Camera support"
+ tristate "USB STV680 (Pencam) Camera support (DEPRECATED)"
depends on VIDEO_V4L1
---help---
+ This driver is DEPRECATED please use the gspca stv0680 module
+ instead. Note that for the gspca stv0680 module you need
+ atleast version 0.6.3 of libv4l.
+
Say Y here if you want to connect this type of camera to your
computer's USB port. This includes the Pencam line of cameras.
See <file:Documentation/video4linux/stv680.txt> for more information
diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
index e541932..7a2dcc3 100644
--- a/drivers/media/video/Makefile
+++ b/drivers/media/video/Makefile
@@ -77,6 +77,8 @@
obj-$(CONFIG_SOC_CAMERA_MT9T031) += mt9t031.o
obj-$(CONFIG_SOC_CAMERA_MT9V022) += mt9v022.o
obj-$(CONFIG_SOC_CAMERA_OV772X) += ov772x.o
+obj-$(CONFIG_SOC_CAMERA_OV9640) += ov9640.o
+obj-$(CONFIG_SOC_CAMERA_RJ54N1) += rj54n1cb0c.o
obj-$(CONFIG_SOC_CAMERA_TW9910) += tw9910.o
# And now the v4l2 drivers:
diff --git a/drivers/media/video/adv7180.c b/drivers/media/video/adv7180.c
index 1b3cbd0..0826f0d 100644
--- a/drivers/media/video/adv7180.c
+++ b/drivers/media/video/adv7180.c
@@ -27,17 +27,40 @@
#include <linux/videodev2.h>
#include <media/v4l2-device.h>
#include <media/v4l2-chip-ident.h>
+#include <linux/mutex.h>
#define DRIVER_NAME "adv7180"
-#define ADV7180_INPUT_CONTROL_REG 0x00
-#define ADV7180_INPUT_CONTROL_PAL_BG_NTSC_J_SECAM 0x00
-#define ADV7180_AUTODETECT_ENABLE_REG 0x07
-#define ADV7180_AUTODETECT_DEFAULT 0x7f
+#define ADV7180_INPUT_CONTROL_REG 0x00
+#define ADV7180_INPUT_CONTROL_AD_PAL_BG_NTSC_J_SECAM 0x00
+#define ADV7180_INPUT_CONTROL_AD_PAL_BG_NTSC_J_SECAM_PED 0x10
+#define ADV7180_INPUT_CONTROL_AD_PAL_N_NTSC_J_SECAM 0x20
+#define ADV7180_INPUT_CONTROL_AD_PAL_N_NTSC_M_SECAM 0x30
+#define ADV7180_INPUT_CONTROL_NTSC_J 0x40
+#define ADV7180_INPUT_CONTROL_NTSC_M 0x50
+#define ADV7180_INPUT_CONTROL_PAL60 0x60
+#define ADV7180_INPUT_CONTROL_NTSC_443 0x70
+#define ADV7180_INPUT_CONTROL_PAL_BG 0x80
+#define ADV7180_INPUT_CONTROL_PAL_N 0x90
+#define ADV7180_INPUT_CONTROL_PAL_M 0xa0
+#define ADV7180_INPUT_CONTROL_PAL_M_PED 0xb0
+#define ADV7180_INPUT_CONTROL_PAL_COMB_N 0xc0
+#define ADV7180_INPUT_CONTROL_PAL_COMB_N_PED 0xd0
+#define ADV7180_INPUT_CONTROL_PAL_SECAM 0xe0
+#define ADV7180_INPUT_CONTROL_PAL_SECAM_PED 0xf0
+#define ADV7180_EXTENDED_OUTPUT_CONTROL_REG 0x04
+#define ADV7180_EXTENDED_OUTPUT_CONTROL_NTSCDIS 0xC5
-#define ADV7180_STATUS1_REG 0x10
-#define ADV7180_STATUS1_AUTOD_MASK 0x70
+#define ADV7180_AUTODETECT_ENABLE_REG 0x07
+#define ADV7180_AUTODETECT_DEFAULT 0x7f
+
+#define ADV7180_ADI_CTRL_REG 0x0e
+#define ADV7180_ADI_CTRL_IRQ_SPACE 0x20
+
+#define ADV7180_STATUS1_REG 0x10
+#define ADV7180_STATUS1_IN_LOCK 0x01
+#define ADV7180_STATUS1_AUTOD_MASK 0x70
#define ADV7180_STATUS1_AUTOD_NTSM_M_J 0x00
#define ADV7180_STATUS1_AUTOD_NTSC_4_43 0x10
#define ADV7180_STATUS1_AUTOD_PAL_M 0x20
@@ -50,18 +73,37 @@
#define ADV7180_IDENT_REG 0x11
#define ADV7180_ID_7180 0x18
+#define ADV7180_ICONF1_ADI 0x40
+#define ADV7180_ICONF1_ACTIVE_LOW 0x01
+#define ADV7180_ICONF1_PSYNC_ONLY 0x10
+#define ADV7180_ICONF1_ACTIVE_TO_CLR 0xC0
+
+#define ADV7180_IRQ1_LOCK 0x01
+#define ADV7180_IRQ1_UNLOCK 0x02
+#define ADV7180_ISR1_ADI 0x42
+#define ADV7180_ICR1_ADI 0x43
+#define ADV7180_IMR1_ADI 0x44
+#define ADV7180_IMR2_ADI 0x48
+#define ADV7180_IRQ3_AD_CHANGE 0x08
+#define ADV7180_ISR3_ADI 0x4A
+#define ADV7180_ICR3_ADI 0x4B
+#define ADV7180_IMR3_ADI 0x4C
+#define ADV7180_IMR4_ADI 0x50
struct adv7180_state {
- struct v4l2_subdev sd;
+ struct v4l2_subdev sd;
+ struct work_struct work;
+ struct mutex mutex; /* mutual excl. when accessing chip */
+ int irq;
+ v4l2_std_id curr_norm;
+ bool autodetect;
};
-static v4l2_std_id determine_norm(struct i2c_client *client)
+static v4l2_std_id adv7180_std_to_v4l2(u8 status1)
{
- u8 status1 = i2c_smbus_read_byte_data(client, ADV7180_STATUS1_REG);
-
switch (status1 & ADV7180_STATUS1_AUTOD_MASK) {
case ADV7180_STATUS1_AUTOD_NTSM_M_J:
- return V4L2_STD_NTSC_M_JP;
+ return V4L2_STD_NTSC;
case ADV7180_STATUS1_AUTOD_NTSC_4_43:
return V4L2_STD_NTSC_443;
case ADV7180_STATUS1_AUTOD_PAL_M:
@@ -81,6 +123,53 @@
}
}
+static int v4l2_std_to_adv7180(v4l2_std_id std)
+{
+ if (std == V4L2_STD_PAL_60)
+ return ADV7180_INPUT_CONTROL_PAL60;
+ if (std == V4L2_STD_NTSC_443)
+ return ADV7180_INPUT_CONTROL_NTSC_443;
+ if (std == V4L2_STD_PAL_N)
+ return ADV7180_INPUT_CONTROL_PAL_N;
+ if (std == V4L2_STD_PAL_M)
+ return ADV7180_INPUT_CONTROL_PAL_M;
+ if (std == V4L2_STD_PAL_Nc)
+ return ADV7180_INPUT_CONTROL_PAL_COMB_N;
+
+ if (std & V4L2_STD_PAL)
+ return ADV7180_INPUT_CONTROL_PAL_BG;
+ if (std & V4L2_STD_NTSC)
+ return ADV7180_INPUT_CONTROL_NTSC_M;
+ if (std & V4L2_STD_SECAM)
+ return ADV7180_INPUT_CONTROL_PAL_SECAM;
+
+ return -EINVAL;
+}
+
+static u32 adv7180_status_to_v4l2(u8 status1)
+{
+ if (!(status1 & ADV7180_STATUS1_IN_LOCK))
+ return V4L2_IN_ST_NO_SIGNAL;
+
+ return 0;
+}
+
+static int __adv7180_status(struct i2c_client *client, u32 *status,
+ v4l2_std_id *std)
+{
+ int status1 = i2c_smbus_read_byte_data(client, ADV7180_STATUS1_REG);
+
+ if (status1 < 0)
+ return status1;
+
+ if (status)
+ *status = adv7180_status_to_v4l2(status1);
+ if (std)
+ *std = adv7180_std_to_v4l2(status1);
+
+ return 0;
+}
+
static inline struct adv7180_state *to_state(struct v4l2_subdev *sd)
{
return container_of(sd, struct adv7180_state, sd);
@@ -88,10 +177,31 @@
static int adv7180_querystd(struct v4l2_subdev *sd, v4l2_std_id *std)
{
- struct i2c_client *client = v4l2_get_subdevdata(sd);
+ struct adv7180_state *state = to_state(sd);
+ int err = mutex_lock_interruptible(&state->mutex);
+ if (err)
+ return err;
- *std = determine_norm(client);
- return 0;
+ /* when we are interrupt driven we know the state */
+ if (!state->autodetect || state->irq > 0)
+ *std = state->curr_norm;
+ else
+ err = __adv7180_status(v4l2_get_subdevdata(sd), NULL, std);
+
+ mutex_unlock(&state->mutex);
+ return err;
+}
+
+static int adv7180_g_input_status(struct v4l2_subdev *sd, u32 *status)
+{
+ struct adv7180_state *state = to_state(sd);
+ int ret = mutex_lock_interruptible(&state->mutex);
+ if (ret)
+ return ret;
+
+ ret = __adv7180_status(v4l2_get_subdevdata(sd), status, NULL);
+ mutex_unlock(&state->mutex);
+ return ret;
}
static int adv7180_g_chip_ident(struct v4l2_subdev *sd,
@@ -102,12 +212,51 @@
return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_ADV7180, 0);
}
+static int adv7180_s_std(struct v4l2_subdev *sd, v4l2_std_id std)
+{
+ struct adv7180_state *state = to_state(sd);
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+ int ret = mutex_lock_interruptible(&state->mutex);
+ if (ret)
+ return ret;
+
+ /* all standards -> autodetect */
+ if (std == V4L2_STD_ALL) {
+ ret = i2c_smbus_write_byte_data(client,
+ ADV7180_INPUT_CONTROL_REG,
+ ADV7180_INPUT_CONTROL_AD_PAL_BG_NTSC_J_SECAM);
+ if (ret < 0)
+ goto out;
+
+ __adv7180_status(client, NULL, &state->curr_norm);
+ state->autodetect = true;
+ } else {
+ ret = v4l2_std_to_adv7180(std);
+ if (ret < 0)
+ goto out;
+
+ ret = i2c_smbus_write_byte_data(client,
+ ADV7180_INPUT_CONTROL_REG, ret);
+ if (ret < 0)
+ goto out;
+
+ state->curr_norm = std;
+ state->autodetect = false;
+ }
+ ret = 0;
+out:
+ mutex_unlock(&state->mutex);
+ return ret;
+}
+
static const struct v4l2_subdev_video_ops adv7180_video_ops = {
.querystd = adv7180_querystd,
+ .g_input_status = adv7180_g_input_status,
};
static const struct v4l2_subdev_core_ops adv7180_core_ops = {
.g_chip_ident = adv7180_g_chip_ident,
+ .s_std = adv7180_s_std,
};
static const struct v4l2_subdev_ops adv7180_ops = {
@@ -115,12 +264,45 @@
.video = &adv7180_video_ops,
};
+static void adv7180_work(struct work_struct *work)
+{
+ struct adv7180_state *state = container_of(work, struct adv7180_state,
+ work);
+ struct i2c_client *client = v4l2_get_subdevdata(&state->sd);
+ u8 isr3;
+
+ mutex_lock(&state->mutex);
+ i2c_smbus_write_byte_data(client, ADV7180_ADI_CTRL_REG,
+ ADV7180_ADI_CTRL_IRQ_SPACE);
+ isr3 = i2c_smbus_read_byte_data(client, ADV7180_ISR3_ADI);
+ /* clear */
+ i2c_smbus_write_byte_data(client, ADV7180_ICR3_ADI, isr3);
+ i2c_smbus_write_byte_data(client, ADV7180_ADI_CTRL_REG, 0);
+
+ if (isr3 & ADV7180_IRQ3_AD_CHANGE && state->autodetect)
+ __adv7180_status(client, NULL, &state->curr_norm);
+ mutex_unlock(&state->mutex);
+
+ enable_irq(state->irq);
+}
+
+static irqreturn_t adv7180_irq(int irq, void *devid)
+{
+ struct adv7180_state *state = devid;
+
+ schedule_work(&state->work);
+
+ disable_irq_nosync(state->irq);
+
+ return IRQ_HANDLED;
+}
+
/*
* Generic i2c probe
* concerning the addresses: i2c wants 7 bit (without the r/w bit), so '>>1'
*/
-static int adv7180_probe(struct i2c_client *client,
+static __devinit int adv7180_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct adv7180_state *state;
@@ -135,32 +317,111 @@
client->addr << 1, client->adapter->name);
state = kzalloc(sizeof(struct adv7180_state), GFP_KERNEL);
- if (state == NULL)
- return -ENOMEM;
+ if (state == NULL) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ state->irq = client->irq;
+ INIT_WORK(&state->work, adv7180_work);
+ mutex_init(&state->mutex);
+ state->autodetect = true;
sd = &state->sd;
v4l2_i2c_subdev_init(sd, client, &adv7180_ops);
/* Initialize adv7180 */
- /* enable autodetection */
+ /* Enable autodetection */
ret = i2c_smbus_write_byte_data(client, ADV7180_INPUT_CONTROL_REG,
- ADV7180_INPUT_CONTROL_PAL_BG_NTSC_J_SECAM);
- if (ret > 0)
- ret = i2c_smbus_write_byte_data(client,
- ADV7180_AUTODETECT_ENABLE_REG,
- ADV7180_AUTODETECT_DEFAULT);
- if (ret < 0) {
- printk(KERN_ERR DRIVER_NAME
- ": Failed to communicate to chip: %d\n", ret);
- return ret;
+ ADV7180_INPUT_CONTROL_AD_PAL_BG_NTSC_J_SECAM);
+ if (ret < 0)
+ goto err_unreg_subdev;
+
+ ret = i2c_smbus_write_byte_data(client, ADV7180_AUTODETECT_ENABLE_REG,
+ ADV7180_AUTODETECT_DEFAULT);
+ if (ret < 0)
+ goto err_unreg_subdev;
+
+ /* ITU-R BT.656-4 compatible */
+ ret = i2c_smbus_write_byte_data(client,
+ ADV7180_EXTENDED_OUTPUT_CONTROL_REG,
+ ADV7180_EXTENDED_OUTPUT_CONTROL_NTSCDIS);
+ if (ret < 0)
+ goto err_unreg_subdev;
+
+ /* read current norm */
+ __adv7180_status(client, NULL, &state->curr_norm);
+
+ /* register for interrupts */
+ if (state->irq > 0) {
+ ret = request_irq(state->irq, adv7180_irq, 0, DRIVER_NAME,
+ state);
+ if (ret)
+ goto err_unreg_subdev;
+
+ ret = i2c_smbus_write_byte_data(client, ADV7180_ADI_CTRL_REG,
+ ADV7180_ADI_CTRL_IRQ_SPACE);
+ if (ret < 0)
+ goto err_unreg_subdev;
+
+ /* config the Interrupt pin to be active low */
+ ret = i2c_smbus_write_byte_data(client, ADV7180_ICONF1_ADI,
+ ADV7180_ICONF1_ACTIVE_LOW | ADV7180_ICONF1_PSYNC_ONLY);
+ if (ret < 0)
+ goto err_unreg_subdev;
+
+ ret = i2c_smbus_write_byte_data(client, ADV7180_IMR1_ADI, 0);
+ if (ret < 0)
+ goto err_unreg_subdev;
+
+ ret = i2c_smbus_write_byte_data(client, ADV7180_IMR2_ADI, 0);
+ if (ret < 0)
+ goto err_unreg_subdev;
+
+ /* enable AD change interrupts interrupts */
+ ret = i2c_smbus_write_byte_data(client, ADV7180_IMR3_ADI,
+ ADV7180_IRQ3_AD_CHANGE);
+ if (ret < 0)
+ goto err_unreg_subdev;
+
+ ret = i2c_smbus_write_byte_data(client, ADV7180_IMR4_ADI, 0);
+ if (ret < 0)
+ goto err_unreg_subdev;
+
+ ret = i2c_smbus_write_byte_data(client, ADV7180_ADI_CTRL_REG,
+ 0);
+ if (ret < 0)
+ goto err_unreg_subdev;
}
return 0;
+
+err_unreg_subdev:
+ mutex_destroy(&state->mutex);
+ v4l2_device_unregister_subdev(sd);
+ kfree(state);
+err:
+ printk(KERN_ERR DRIVER_NAME ": Failed to probe: %d\n", ret);
+ return ret;
}
-static int adv7180_remove(struct i2c_client *client)
+static __devexit int adv7180_remove(struct i2c_client *client)
{
struct v4l2_subdev *sd = i2c_get_clientdata(client);
+ struct adv7180_state *state = to_state(sd);
+ if (state->irq > 0) {
+ free_irq(client->irq, state);
+ if (cancel_work_sync(&state->work)) {
+ /*
+ * Work was pending, therefore we need to enable
+ * IRQ here to balance the disable_irq() done in the
+ * interrupt handler.
+ */
+ enable_irq(state->irq);
+ }
+ }
+
+ mutex_destroy(&state->mutex);
v4l2_device_unregister_subdev(sd);
kfree(to_state(sd));
return 0;
@@ -179,7 +440,7 @@
.name = DRIVER_NAME,
},
.probe = adv7180_probe,
- .remove = adv7180_remove,
+ .remove = __devexit_p(adv7180_remove),
.id_table = adv7180_id,
};
diff --git a/drivers/media/video/au0828/au0828-video.c b/drivers/media/video/au0828/au0828-video.c
index 51527d7..1485aee 100644
--- a/drivers/media/video/au0828/au0828-video.c
+++ b/drivers/media/video/au0828/au0828-video.c
@@ -830,7 +830,7 @@
au0828_uninit_isoc(dev);
/* Save some power by putting tuner to sleep */
- v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_standby);
+ v4l2_device_call_all(&dev->v4l2_dev, 0, core, s_power, 0);
/* When close the device, set the usb intf0 into alt0 to free
USB bandwidth */
diff --git a/drivers/media/video/bt819.c b/drivers/media/video/bt819.c
index f9330e3..5bb0f9e 100644
--- a/drivers/media/video/bt819.c
+++ b/drivers/media/video/bt819.c
@@ -299,7 +299,7 @@
v4l2_dbg(1, debug, sd, "set input %x\n", input);
- if (input < 0 || input > 7)
+ if (input > 7)
return -EINVAL;
if (sd->v4l2_dev == NULL || sd->v4l2_dev->notify == NULL)
diff --git a/drivers/media/video/bt8xx/bttv-input.c b/drivers/media/video/bt8xx/bttv-input.c
index ebd51af..84a957e 100644
--- a/drivers/media/video/bt8xx/bttv-input.c
+++ b/drivers/media/video/bt8xx/bttv-input.c
@@ -73,12 +73,12 @@
if ((ir->mask_keydown && (0 != (gpio & ir->mask_keydown))) ||
(ir->mask_keyup && (0 == (gpio & ir->mask_keyup)))) {
- ir_input_keydown(ir->dev,&ir->ir,data,data);
+ ir_input_keydown(ir->dev, &ir->ir, data);
} else {
/* HACK: Probably, ir->mask_keydown is missing
for this board */
if (btv->c.type == BTTV_BOARD_WINFAST2000)
- ir_input_keydown(ir->dev, &ir->ir, data, data);
+ ir_input_keydown(ir->dev, &ir->ir, data);
ir_input_nokey(ir->dev,&ir->ir);
}
@@ -104,7 +104,7 @@
gpio, data,
(gpio & ir->mask_keyup) ? " up" : "up/down");
- ir_input_keydown(ir->dev, &ir->ir, data, data);
+ ir_input_keydown(ir->dev, &ir->ir, data);
if (keyup)
ir_input_nokey(ir->dev, &ir->ir);
} else {
@@ -118,7 +118,7 @@
if (keyup)
ir_input_nokey(ir->dev, &ir->ir);
else
- ir_input_keydown(ir->dev, &ir->ir, data, data);
+ ir_input_keydown(ir->dev, &ir->ir, data);
}
ir->last_gpio = data | keyup;
@@ -368,7 +368,10 @@
snprintf(ir->phys, sizeof(ir->phys), "pci-%s/ir0",
pci_name(btv->c.pci));
- ir_input_init(input_dev, &ir->ir, ir_type, ir_codes);
+ err = ir_input_init(input_dev, &ir->ir, ir_type, ir_codes);
+ if (err < 0)
+ goto err_out_free;
+
input_dev->name = ir->name;
input_dev->phys = ir->phys;
input_dev->id.bustype = BUS_PCI;
@@ -400,6 +403,7 @@
bttv_ir_stop(btv);
btv->remote = NULL;
err_out_free:
+ ir_input_free(input_dev);
input_free_device(input_dev);
kfree(ir);
return err;
@@ -411,6 +415,7 @@
return;
bttv_ir_stop(btv);
+ ir_input_free(btv->remote->dev);
input_unregister_device(btv->remote->dev);
kfree(btv->remote);
btv->remote = NULL;
diff --git a/drivers/media/video/cx18/cx18-av-core.c b/drivers/media/video/cx18/cx18-av-core.c
index 536dedb..4392c76 100644
--- a/drivers/media/video/cx18/cx18-av-core.c
+++ b/drivers/media/video/cx18/cx18-av-core.c
@@ -99,10 +99,8 @@
or_value);
}
-static int cx18_av_init(struct v4l2_subdev *sd, u32 val)
+static void cx18_av_init(struct cx18 *cx)
{
- struct cx18 *cx = v4l2_get_subdevdata(sd);
-
/*
* The crystal freq used in calculations in this driver will be
* 28.636360 MHz.
@@ -125,7 +123,6 @@
/* SA_MCLK_SEL=1, SA_MCLK_DIV=0x16 */
cx18_av_write(cx, CXADEC_I2S_MCLK, 0x56);
- return 0;
}
static void cx18_av_initialize(struct v4l2_subdev *sd)
@@ -198,7 +195,7 @@
cx18_av_and_or4(cx, CXADEC_CHIP_CTRL, 0xFFFBFFFF, 0x00120000);
/* Setup the Video and and Aux/Audio PLLs */
- cx18_av_init(sd, 0);
+ cx18_av_init(cx);
/* set video to auto-detect */
/* Clear bits 11-12 to enable slow locking mode. Set autodetect mode */
@@ -1355,7 +1352,6 @@
static const struct v4l2_subdev_core_ops cx18_av_general_ops = {
.g_chip_ident = cx18_av_g_chip_ident,
.log_status = cx18_av_log_status,
- .init = cx18_av_init,
.load_fw = cx18_av_load_fw,
.reset = cx18_av_reset,
.queryctrl = cx18_av_queryctrl,
@@ -1399,6 +1395,7 @@
{
struct cx18_av_state *state = &cx->av_state;
struct v4l2_subdev *sd;
+ int err;
state->rev = cx18_av_read4(cx, CXADEC_CHIP_CTRL) & 0xffff;
state->id = ((state->rev >> 4) == CXADEC_CHIP_TYPE_MAKO)
@@ -1417,5 +1414,8 @@
snprintf(sd->name, sizeof(sd->name),
"%s %03x", cx->v4l2_dev.name, (state->rev >> 4));
sd->grp_id = CX18_HW_418_AV;
- return v4l2_device_register_subdev(&cx->v4l2_dev, sd);
+ err = v4l2_device_register_subdev(&cx->v4l2_dev, sd);
+ if (!err)
+ cx18_av_init(cx);
+ return err;
}
diff --git a/drivers/media/video/cx18/cx18-av-core.h b/drivers/media/video/cx18/cx18-av-core.h
index 9b84a0c..cafb7e9 100644
--- a/drivers/media/video/cx18/cx18-av-core.h
+++ b/drivers/media/video/cx18/cx18-av-core.h
@@ -294,7 +294,7 @@
#define CXADEC_QAM_CONST_DEC 0x924
#define CXADEC_QAM_ROTATOR_FREQ 0x948
-/* Bit defintions / settings used in Mako Audio */
+/* Bit definitions / settings used in Mako Audio */
#define CXADEC_PREF_MODE_MONO_LANGA 0
#define CXADEC_PREF_MODE_MONO_LANGB 1
#define CXADEC_PREF_MODE_MONO_LANGC 2
diff --git a/drivers/media/video/cx18/cx18-cards.h b/drivers/media/video/cx18/cx18-cards.h
index 444e3c7..af3d716 100644
--- a/drivers/media/video/cx18/cx18-cards.h
+++ b/drivers/media/video/cx18/cx18-cards.h
@@ -34,6 +34,9 @@
#define CX18_HW_Z8F0811_IR_HAUP (CX18_HW_Z8F0811_IR_RX_HAUP | \
CX18_HW_Z8F0811_IR_TX_HAUP)
+#define CX18_HW_IR_ANY (CX18_HW_Z8F0811_IR_RX_HAUP | \
+ CX18_HW_Z8F0811_IR_TX_HAUP)
+
/* video inputs */
#define CX18_CARD_INPUT_VID_TUNER 1
#define CX18_CARD_INPUT_SVIDEO1 2
diff --git a/drivers/media/video/cx18/cx18-driver.c b/drivers/media/video/cx18/cx18-driver.c
index 6dd51e2..7f65a47 100644
--- a/drivers/media/video/cx18/cx18-driver.c
+++ b/drivers/media/video/cx18/cx18-driver.c
@@ -87,7 +87,6 @@
static int enc_mpg_bufsize = CX18_DEFAULT_ENC_MPG_BUFSIZE;
static int enc_idx_bufsize = CX18_DEFAULT_ENC_IDX_BUFSIZE;
static int enc_yuv_bufsize = CX18_DEFAULT_ENC_YUV_BUFSIZE;
-/* VBI bufsize based on standards supported by card tuner for now */
static int enc_pcm_bufsize = CX18_DEFAULT_ENC_PCM_BUFSIZE;
static int enc_ts_bufs = -1;
@@ -128,7 +127,6 @@
module_param(enc_mpg_bufsize, int, 0644);
module_param(enc_idx_bufsize, int, 0644);
module_param(enc_yuv_bufsize, int, 0644);
-/* VBI bufsize based on standards supported by card tuner for now */
module_param(enc_pcm_bufsize, int, 0644);
module_param(enc_ts_bufs, int, 0644);
@@ -211,7 +209,9 @@
"\t\t\tDefault: " __stringify(CX18_DEFAULT_ENC_YUV_BUFFERS));
MODULE_PARM_DESC(enc_yuv_bufsize,
"Size of an encoder YUV buffer (kB)\n"
- "\t\t\tDefault: " __stringify(CX18_DEFAULT_ENC_YUV_BUFSIZE));
+ "\t\t\tAllowed values are multiples of 33.75 kB rounded up\n"
+ "\t\t\t(multiples of size required for 32 screen lines)\n"
+ "\t\t\tDefault: 102");
MODULE_PARM_DESC(enc_yuv_bufs,
"Number of encoder YUV buffers\n"
"\t\t\tDefault is computed from other enc_yuv_* parameters");
@@ -220,7 +220,7 @@
"\t\t\tDefault: " __stringify(CX18_DEFAULT_ENC_VBI_BUFFERS));
MODULE_PARM_DESC(enc_vbi_bufs,
"Number of encoder VBI buffers\n"
- "\t\t\tDefault is computed from enc_vbi_buffers & tuner std");
+ "\t\t\tDefault is computed from enc_vbi_buffers");
MODULE_PARM_DESC(enc_pcm_buffers,
"Encoder PCM buffer memory (MB). (enc_pcm_bufs can override)\n"
"\t\t\tDefault: " __stringify(CX18_DEFAULT_ENC_PCM_BUFFERS));
@@ -499,10 +499,27 @@
continue;
}
/*
+ * YUV is a special case where the stream_buf_size needs to be
+ * an integral multiple of 33.75 kB (storage for 32 screens
+ * lines to maintain alignment in case of lost buffers
+ */
+ if (i == CX18_ENC_STREAM_TYPE_YUV) {
+ cx->stream_buf_size[i] *= 1024;
+ cx->stream_buf_size[i] -=
+ (cx->stream_buf_size[i] % CX18_UNIT_ENC_YUV_BUFSIZE);
+
+ if (cx->stream_buf_size[i] < CX18_UNIT_ENC_YUV_BUFSIZE)
+ cx->stream_buf_size[i] =
+ CX18_UNIT_ENC_YUV_BUFSIZE;
+ }
+ /*
+ * YUV is a special case where the stream_buf_size is
+ * now in bytes.
* VBI is a special case where the stream_buf_size is fixed
* and already in bytes
*/
- if (i == CX18_ENC_STREAM_TYPE_VBI) {
+ if (i == CX18_ENC_STREAM_TYPE_VBI ||
+ i == CX18_ENC_STREAM_TYPE_YUV) {
if (cx->stream_buffers[i] < 0) {
cx->stream_buffers[i] =
cx->options.megabytes[i] * 1024 * 1024
@@ -513,18 +530,24 @@
cx->stream_buffers[i]
* cx->stream_buf_size[i]/(1024 * 1024);
}
- continue;
- }
- /* All other streams have stream_buf_size in kB at this point */
- if (cx->stream_buffers[i] < 0) {
- cx->stream_buffers[i] = cx->options.megabytes[i] * 1024
- / cx->stream_buf_size[i];
} else {
- /* N.B. This might round down to 0 */
- cx->options.megabytes[i] =
- cx->stream_buffers[i] * cx->stream_buf_size[i] / 1024;
+ /* All other streams have stream_buf_size in kB here */
+ if (cx->stream_buffers[i] < 0) {
+ cx->stream_buffers[i] =
+ cx->options.megabytes[i] * 1024
+ / cx->stream_buf_size[i];
+ } else {
+ /* N.B. This might round down to 0 */
+ cx->options.megabytes[i] =
+ cx->stream_buffers[i]
+ * cx->stream_buf_size[i] / 1024;
+ }
+ /* convert from kB to bytes */
+ cx->stream_buf_size[i] *= 1024;
}
- cx->stream_buf_size[i] *= 1024; /* convert from kB to bytes */
+ CX18_DEBUG_INFO("Stream type %d options: %d MB, %d buffers, "
+ "%d bytes\n", i, cx->options.megabytes[i],
+ cx->stream_buffers[i], cx->stream_buf_size[i]);
}
cx->options.cardtype = cardtype[cx->instance];
@@ -669,6 +692,12 @@
cx->vbi.in.type = V4L2_BUF_TYPE_VBI_CAPTURE;
cx->vbi.sliced_in = &cx->vbi.in.fmt.sliced;
+ /* IVTV style VBI insertion into MPEG streams */
+ INIT_LIST_HEAD(&cx->vbi.sliced_mpeg_buf.list);
+ INIT_LIST_HEAD(&cx->vbi.sliced_mpeg_mdl.list);
+ INIT_LIST_HEAD(&cx->vbi.sliced_mpeg_mdl.buf_list);
+ list_add(&cx->vbi.sliced_mpeg_buf.list,
+ &cx->vbi.sliced_mpeg_mdl.buf_list);
return 0;
}
@@ -883,7 +912,6 @@
CX18_ERR("Could not register A/V decoder subdevice\n");
goto free_map;
}
- cx18_call_hw(cx, CX18_HW_418_AV, core, init, 0);
/* Initialize GPIO Reset Controller to do chip resets during i2c init */
if (cx->card->hw_all & CX18_HW_GPIO_RESET_CTRL) {
@@ -1200,7 +1228,7 @@
.remove = cx18_remove,
};
-static int module_start(void)
+static int __init module_start(void)
{
printk(KERN_INFO "cx18: Start initialization, version %s\n", CX18_VERSION);
@@ -1224,7 +1252,7 @@
return 0;
}
-static void module_cleanup(void)
+static void __exit module_cleanup(void)
{
pci_unregister_driver(&cx18_pci_driver);
}
diff --git a/drivers/media/video/cx18/cx18-driver.h b/drivers/media/video/cx18/cx18-driver.h
index c6a1e90..e3f7911 100644
--- a/drivers/media/video/cx18/cx18-driver.h
+++ b/drivers/media/video/cx18/cx18-driver.h
@@ -50,6 +50,7 @@
#include <media/v4l2-ioctl.h>
#include <media/v4l2-device.h>
#include <media/tuner.h>
+#include <media/ir-kbd-i2c.h>
#include "cx18-mailbox.h"
#include "cx18-av-core.h"
#include "cx23418.h"
@@ -120,12 +121,16 @@
/* Maximum firmware DMA buffers per stream */
#define CX18_MAX_FW_MDLS_PER_STREAM 63
+/* YUV buffer sizes in bytes to ensure integer # of frames per buffer */
+#define CX18_UNIT_ENC_YUV_BUFSIZE (720 * 32 * 3 / 2) /* bytes */
+#define CX18_625_LINE_ENC_YUV_BUFSIZE (CX18_UNIT_ENC_YUV_BUFSIZE * 576/32)
+#define CX18_525_LINE_ENC_YUV_BUFSIZE (CX18_UNIT_ENC_YUV_BUFSIZE * 480/32)
+
/* DMA buffer, default size in kB allocated */
#define CX18_DEFAULT_ENC_TS_BUFSIZE 32
#define CX18_DEFAULT_ENC_MPG_BUFSIZE 32
#define CX18_DEFAULT_ENC_IDX_BUFSIZE 32
-#define CX18_DEFAULT_ENC_YUV_BUFSIZE 128
-/* Default VBI bufsize based on standards supported by card tuner for now */
+#define CX18_DEFAULT_ENC_YUV_BUFSIZE (CX18_UNIT_ENC_YUV_BUFSIZE * 3 / 1024 + 1)
#define CX18_DEFAULT_ENC_PCM_BUFSIZE 4
/* i2c stuff */
@@ -246,8 +251,8 @@
int radio; /* enable/disable radio */
};
-/* per-buffer bit flags */
-#define CX18_F_B_NEED_BUF_SWAP 0 /* this buffer should be byte swapped */
+/* per-mdl bit flags */
+#define CX18_F_M_NEED_SWAP 0 /* mdl buffer data must be endianess swapped */
/* per-stream, s_flags */
#define CX18_F_S_CLAIMED 3 /* this stream is claimed */
@@ -274,18 +279,29 @@
struct cx18_buffer {
struct list_head list;
dma_addr_t dma_handle;
- u32 id;
- unsigned long b_flags;
- unsigned skipped;
char *buf;
u32 bytesused;
u32 readpos;
};
+struct cx18_mdl {
+ struct list_head list;
+ u32 id; /* index into cx->scb->cpu_mdl[] of 1st cx18_mdl_ent */
+
+ unsigned int skipped;
+ unsigned long m_flags;
+
+ struct list_head buf_list;
+ struct cx18_buffer *curr_buf; /* current buffer in list for reading */
+
+ u32 bytesused;
+ u32 readpos;
+};
+
struct cx18_queue {
struct list_head list;
- atomic_t buffers;
+ atomic_t depth;
u32 bytesused;
spinlock_t lock;
};
@@ -337,7 +353,7 @@
const char *name; /* name of the stream */
int type; /* stream type */
u32 handle; /* task handle */
- unsigned mdl_offset;
+ unsigned int mdl_base_idx;
u32 id;
unsigned long s_flags; /* status flags, see above */
@@ -346,14 +362,20 @@
PCI_DMA_NONE */
wait_queue_head_t waitq;
- /* Buffer Stats */
- u32 buffers;
- u32 buf_size;
+ /* Buffers */
+ struct list_head buf_pool; /* buffers not attached to an MDL */
+ u32 buffers; /* total buffers owned by this stream */
+ u32 buf_size; /* size in bytes of a single buffer */
- /* Buffer Queues */
- struct cx18_queue q_free; /* free buffers */
- struct cx18_queue q_busy; /* busy buffers - in use by firmware */
- struct cx18_queue q_full; /* full buffers - data for user apps */
+ /* MDL sizes - all stream MDLs are the same size */
+ u32 bufs_per_mdl;
+ u32 mdl_size; /* total bytes in all buffers in a mdl */
+
+ /* MDL Queues */
+ struct cx18_queue q_free; /* free - in rotation, not committed */
+ struct cx18_queue q_busy; /* busy - in use by firmware */
+ struct cx18_queue q_full; /* full - data for user apps */
+ struct cx18_queue q_idle; /* idle - not in rotation */
struct work_struct out_work_order;
@@ -481,10 +503,11 @@
u32 inserted_frame;
/*
- * A dummy driver stream transfer buffer with a copy of the next
+ * A dummy driver stream transfer mdl & buffer with a copy of the next
* sliced_mpeg_data[] buffer for output to userland apps.
* Only used in cx18-fileops.c, but its state needs to persist at times.
*/
+ struct cx18_mdl sliced_mpeg_mdl;
struct cx18_buffer sliced_mpeg_buf;
};
@@ -511,10 +534,9 @@
u8 is_60hz;
u8 nof_inputs; /* number of video inputs */
u8 nof_audio_inputs; /* number of audio inputs */
- u16 buffer_id; /* buffer ID counter */
u32 v4l2_cap; /* V4L2 capabilities of card */
u32 hw_flags; /* Hardware description of the board */
- unsigned mdl_offset;
+ unsigned int free_mdl_idx;
struct cx18_scb __iomem *scb; /* pointer to SCB */
struct mutex epu2apu_mb_lock; /* protect driver to chip mailbox in SCB*/
struct mutex epu2cpu_mb_lock; /* protect driver to chip mailbox in SCB*/
@@ -585,6 +607,8 @@
struct i2c_algo_bit_data i2c_algo[2];
struct cx18_i2c_algo_callback_data i2c_algo_cb_data[2];
+ struct IR_i2c_init_data ir_i2c_init_data;
+
/* gpio */
u32 gpio_dir;
u32 gpio_val;
diff --git a/drivers/media/video/cx18/cx18-dvb.c b/drivers/media/video/cx18/cx18-dvb.c
index 51a0c33..71ad2d1 100644
--- a/drivers/media/video/cx18/cx18-dvb.c
+++ b/drivers/media/video/cx18/cx18-dvb.c
@@ -61,6 +61,7 @@
.top = MXL5005S_TOP_25P2,
.mod_mode = MXL_DIGITAL_MODE,
.if_mode = MXL_ZERO_IF,
+ .qam_gain = 0x02,
.AgcMasterByte = 0x00,
};
@@ -71,7 +72,8 @@
.qam_if = 44000,
.inversion = S5H1409_INVERSION_OFF,
.status_mode = S5H1409_DEMODLOCKING,
- .mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK
+ .mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
+ .hvr1600_opt = S5H1409_HVR1600_OPTIMIZE
};
/*
@@ -360,9 +362,10 @@
dvb_net_init(dvb_adapter, &dvb->dvbnet, dmx);
CX18_INFO("DVB Frontend registered\n");
- CX18_INFO("Registered DVB adapter%d for %s (%d x %d kB)\n",
+ CX18_INFO("Registered DVB adapter%d for %s (%d x %d.%02d kB)\n",
stream->dvb.dvb_adapter.num, stream->name,
- stream->buffers, stream->buf_size/1024);
+ stream->buffers, stream->buf_size/1024,
+ (stream->buf_size * 100 / 1024) % 100);
mutex_init(&dvb->feedlock);
dvb->enabled = 1;
diff --git a/drivers/media/video/cx18/cx18-fileops.c b/drivers/media/video/cx18/cx18-fileops.c
index 04d9c25..4e278db 100644
--- a/drivers/media/video/cx18/cx18-fileops.c
+++ b/drivers/media/video/cx18/cx18-fileops.c
@@ -166,11 +166,12 @@
}
-static struct cx18_buffer *cx18_get_buffer(struct cx18_stream *s, int non_block, int *err)
+static struct cx18_mdl *cx18_get_mdl(struct cx18_stream *s, int non_block,
+ int *err)
{
struct cx18 *cx = s->cx;
struct cx18_stream *s_vbi = &cx->streams[CX18_ENC_STREAM_TYPE_VBI];
- struct cx18_buffer *buf;
+ struct cx18_mdl *mdl;
DEFINE_WAIT(wait);
*err = 0;
@@ -185,32 +186,33 @@
}
if (test_bit(CX18_F_S_INTERNAL_USE, &s_vbi->s_flags) &&
!test_bit(CX18_F_S_APPL_IO, &s_vbi->s_flags)) {
- while ((buf = cx18_dequeue(s_vbi, &s_vbi->q_full))) {
+ while ((mdl = cx18_dequeue(s_vbi,
+ &s_vbi->q_full))) {
/* byteswap and process VBI data */
- cx18_process_vbi_data(cx, buf,
+ cx18_process_vbi_data(cx, mdl,
s_vbi->type);
- cx18_stream_put_buf_fw(s_vbi, buf);
+ cx18_stream_put_mdl_fw(s_vbi, mdl);
}
}
- buf = &cx->vbi.sliced_mpeg_buf;
- if (buf->readpos != buf->bytesused)
- return buf;
+ mdl = &cx->vbi.sliced_mpeg_mdl;
+ if (mdl->readpos != mdl->bytesused)
+ return mdl;
}
/* do we have new data? */
- buf = cx18_dequeue(s, &s->q_full);
- if (buf) {
- if (!test_and_clear_bit(CX18_F_B_NEED_BUF_SWAP,
- &buf->b_flags))
- return buf;
+ mdl = cx18_dequeue(s, &s->q_full);
+ if (mdl) {
+ if (!test_and_clear_bit(CX18_F_M_NEED_SWAP,
+ &mdl->m_flags))
+ return mdl;
if (s->type == CX18_ENC_STREAM_TYPE_MPG)
/* byteswap MPG data */
- cx18_buf_swap(buf);
+ cx18_mdl_swap(mdl);
else {
/* byteswap and process VBI data */
- cx18_process_vbi_data(cx, buf, s->type);
+ cx18_process_vbi_data(cx, mdl, s->type);
}
- return buf;
+ return mdl;
}
/* return if end of stream */
@@ -229,7 +231,7 @@
prepare_to_wait(&s->waitq, &wait, TASK_INTERRUPTIBLE);
/* New buffers might have become available before we were added
to the waitqueue */
- if (!atomic_read(&s->q_full.buffers))
+ if (!atomic_read(&s->q_full.depth))
schedule();
finish_wait(&s->waitq, &wait);
if (signal_pending(current)) {
@@ -241,21 +243,28 @@
}
}
-static void cx18_setup_sliced_vbi_buf(struct cx18 *cx)
+static void cx18_setup_sliced_vbi_mdl(struct cx18 *cx)
{
+ struct cx18_mdl *mdl = &cx->vbi.sliced_mpeg_mdl;
+ struct cx18_buffer *buf = &cx->vbi.sliced_mpeg_buf;
int idx = cx->vbi.inserted_frame % CX18_VBI_FRAMES;
- cx->vbi.sliced_mpeg_buf.buf = cx->vbi.sliced_mpeg_data[idx];
- cx->vbi.sliced_mpeg_buf.bytesused = cx->vbi.sliced_mpeg_size[idx];
- cx->vbi.sliced_mpeg_buf.readpos = 0;
+ buf->buf = cx->vbi.sliced_mpeg_data[idx];
+ buf->bytesused = cx->vbi.sliced_mpeg_size[idx];
+ buf->readpos = 0;
+
+ mdl->curr_buf = NULL;
+ mdl->bytesused = cx->vbi.sliced_mpeg_size[idx];
+ mdl->readpos = 0;
}
static size_t cx18_copy_buf_to_user(struct cx18_stream *s,
- struct cx18_buffer *buf, char __user *ubuf, size_t ucount)
+ struct cx18_buffer *buf, char __user *ubuf, size_t ucount, bool *stop)
{
struct cx18 *cx = s->cx;
size_t len = buf->bytesused - buf->readpos;
+ *stop = false;
if (len > ucount)
len = ucount;
if (cx->vbi.insert_mpeg && s->type == CX18_ENC_STREAM_TYPE_MPG &&
@@ -335,7 +344,8 @@
/* We declare we actually found a Program Pack*/
cx->search_pack_header = 0; /* expect vid PES */
len = (char *)q - start;
- cx18_setup_sliced_vbi_buf(cx);
+ cx18_setup_sliced_vbi_mdl(cx);
+ *stop = true;
break;
}
}
@@ -352,6 +362,60 @@
return len;
}
+/**
+ * list_entry_is_past_end - check if a previous loop cursor is off list end
+ * @pos: the type * previously used as a loop cursor.
+ * @head: the head for your list.
+ * @member: the name of the list_struct within the struct.
+ *
+ * Check if the entry's list_head is the head of the list, thus it's not a
+ * real entry but was the loop cursor that walked past the end
+ */
+#define list_entry_is_past_end(pos, head, member) \
+ (&pos->member == (head))
+
+static size_t cx18_copy_mdl_to_user(struct cx18_stream *s,
+ struct cx18_mdl *mdl, char __user *ubuf, size_t ucount)
+{
+ size_t tot_written = 0;
+ int rc;
+ bool stop = false;
+
+ if (mdl->curr_buf == NULL)
+ mdl->curr_buf = list_first_entry(&mdl->buf_list,
+ struct cx18_buffer, list);
+
+ if (list_entry_is_past_end(mdl->curr_buf, &mdl->buf_list, list)) {
+ /*
+ * For some reason we've exhausted the buffers, but the MDL
+ * object still said some data was unread.
+ * Fix that and bail out.
+ */
+ mdl->readpos = mdl->bytesused;
+ return 0;
+ }
+
+ list_for_each_entry_from(mdl->curr_buf, &mdl->buf_list, list) {
+
+ if (mdl->curr_buf->readpos >= mdl->curr_buf->bytesused)
+ continue;
+
+ rc = cx18_copy_buf_to_user(s, mdl->curr_buf, ubuf + tot_written,
+ ucount - tot_written, &stop);
+ if (rc < 0)
+ return rc;
+ mdl->readpos += rc;
+ tot_written += rc;
+
+ if (stop || /* Forced stopping point for VBI insertion */
+ tot_written >= ucount || /* Reader request statisfied */
+ mdl->curr_buf->readpos < mdl->curr_buf->bytesused ||
+ mdl->readpos >= mdl->bytesused) /* MDL buffers drained */
+ break;
+ }
+ return tot_written;
+}
+
static ssize_t cx18_read(struct cx18_stream *s, char __user *ubuf,
size_t tot_count, int non_block)
{
@@ -373,12 +437,12 @@
single_frame = 1;
for (;;) {
- struct cx18_buffer *buf;
+ struct cx18_mdl *mdl;
int rc;
- buf = cx18_get_buffer(s, non_block, &rc);
+ mdl = cx18_get_mdl(s, non_block, &rc);
/* if there is no data available... */
- if (buf == NULL) {
+ if (mdl == NULL) {
/* if we got data, then return that regardless */
if (tot_written)
break;
@@ -392,20 +456,20 @@
return rc;
}
- rc = cx18_copy_buf_to_user(s, buf, ubuf + tot_written,
+ rc = cx18_copy_mdl_to_user(s, mdl, ubuf + tot_written,
tot_count - tot_written);
- if (buf != &cx->vbi.sliced_mpeg_buf) {
- if (buf->readpos == buf->bytesused)
- cx18_stream_put_buf_fw(s, buf);
+ if (mdl != &cx->vbi.sliced_mpeg_mdl) {
+ if (mdl->readpos == mdl->bytesused)
+ cx18_stream_put_mdl_fw(s, mdl);
else
- cx18_push(s, buf, &s->q_full);
- } else if (buf->readpos == buf->bytesused) {
+ cx18_push(s, mdl, &s->q_full);
+ } else if (mdl->readpos == mdl->bytesused) {
int idx = cx->vbi.inserted_frame % CX18_VBI_FRAMES;
cx->vbi.sliced_mpeg_size[idx] = 0;
cx->vbi.inserted_frame++;
- cx->vbi_data_inserted += buf->bytesused;
+ cx->vbi_data_inserted += mdl->bytesused;
}
if (rc < 0)
return rc;
@@ -543,7 +607,7 @@
CX18_DEBUG_HI_FILE("Encoder poll\n");
poll_wait(filp, &s->waitq, wait);
- if (atomic_read(&s->q_full.buffers))
+ if (atomic_read(&s->q_full.depth))
return POLLIN | POLLRDNORM;
if (eof)
return POLLHUP;
diff --git a/drivers/media/video/cx18/cx18-i2c.c b/drivers/media/video/cx18/cx18-i2c.c
index 2477461..eecf29a 100644
--- a/drivers/media/video/cx18/cx18-i2c.c
+++ b/drivers/media/video/cx18/cx18-i2c.c
@@ -28,7 +28,6 @@
#include "cx18-gpio.h"
#include "cx18-i2c.h"
#include "cx18-irq.h"
-#include <media/ir-kbd-i2c.h>
#define CX18_REG_I2C_1_WR 0xf15000
#define CX18_REG_I2C_1_RD 0xf15008
@@ -97,17 +96,11 @@
"ir_rx_z8f0811_haup",
};
-static const struct IR_i2c_init_data z8f0811_ir_init_data = {
- .ir_codes = &ir_codes_hauppauge_new_table,
- .internal_get_key_func = IR_KBD_GET_KEY_HAUP_XVR,
- .type = IR_TYPE_RC5,
- .name = "CX23418 Z8F0811 Hauppauge",
-};
-
-static int cx18_i2c_new_ir(struct i2c_adapter *adap, u32 hw, const char *type,
- u8 addr)
+static int cx18_i2c_new_ir(struct cx18 *cx, struct i2c_adapter *adap, u32 hw,
+ const char *type, u8 addr)
{
struct i2c_board_info info;
+ struct IR_i2c_init_data *init_data = &cx->ir_i2c_init_data;
unsigned short addr_list[2] = { addr, I2C_CLIENT_END };
memset(&info, 0, sizeof(struct i2c_board_info));
@@ -116,9 +109,11 @@
/* Our default information for ir-kbd-i2c.c to use */
switch (hw) {
case CX18_HW_Z8F0811_IR_RX_HAUP:
- info.platform_data = (void *) &z8f0811_ir_init_data;
- break;
- default:
+ init_data->ir_codes = &ir_codes_hauppauge_new_table;
+ init_data->internal_get_key_func = IR_KBD_GET_KEY_HAUP_XVR;
+ init_data->type = IR_TYPE_RC5;
+ init_data->name = cx->card_name;
+ info.platform_data = init_data;
break;
}
@@ -154,8 +149,8 @@
return sd != NULL ? 0 : -1;
}
- if (hw & CX18_HW_Z8F0811_IR_HAUP)
- return cx18_i2c_new_ir(adap, hw, type, hw_addrs[idx]);
+ if (hw & CX18_HW_IR_ANY)
+ return cx18_i2c_new_ir(cx, adap, hw, type, hw_addrs[idx]);
/* Is it not an I2C device or one we do not wish to register? */
if (!hw_addrs[idx])
diff --git a/drivers/media/video/cx18/cx18-ioctl.c b/drivers/media/video/cx18/cx18-ioctl.c
index fc76e4d..3e4fc19 100644
--- a/drivers/media/video/cx18/cx18-ioctl.c
+++ b/drivers/media/video/cx18/cx18-ioctl.c
@@ -910,7 +910,8 @@
continue;
CX18_INFO("Stream %s: status 0x%04lx, %d%% of %d KiB (%d buffers) in use\n",
s->name, s->s_flags,
- atomic_read(&s->q_full.buffers) * 100 / s->buffers,
+ atomic_read(&s->q_full.depth) * s->bufs_per_mdl * 100
+ / s->buffers,
(s->buffers * s->buf_size) / 1024, s->buffers);
}
CX18_INFO("Read MPEG/VBI: %lld/%lld bytes\n",
diff --git a/drivers/media/video/cx18/cx18-mailbox.c b/drivers/media/video/cx18/cx18-mailbox.c
index afe46c3..f231dd0 100644
--- a/drivers/media/video/cx18/cx18-mailbox.c
+++ b/drivers/media/video/cx18/cx18-mailbox.c
@@ -131,13 +131,39 @@
* Functions that run in a work_queue work handling context
*/
+static void cx18_mdl_send_to_dvb(struct cx18_stream *s, struct cx18_mdl *mdl)
+{
+ struct cx18_buffer *buf;
+
+ if (!s->dvb.enabled || mdl->bytesused == 0)
+ return;
+
+ /* We ignore mdl and buf readpos accounting here - it doesn't matter */
+
+ /* The likely case */
+ if (list_is_singular(&mdl->buf_list)) {
+ buf = list_first_entry(&mdl->buf_list, struct cx18_buffer,
+ list);
+ if (buf->bytesused)
+ dvb_dmx_swfilter(&s->dvb.demux,
+ buf->buf, buf->bytesused);
+ return;
+ }
+
+ list_for_each_entry(buf, &mdl->buf_list, list) {
+ if (buf->bytesused == 0)
+ break;
+ dvb_dmx_swfilter(&s->dvb.demux, buf->buf, buf->bytesused);
+ }
+}
+
static void epu_dma_done(struct cx18 *cx, struct cx18_in_work_order *order)
{
u32 handle, mdl_ack_count, id;
struct cx18_mailbox *mb;
struct cx18_mdl_ack *mdl_ack;
struct cx18_stream *s;
- struct cx18_buffer *buf;
+ struct cx18_mdl *mdl;
int i;
mb = &order->mb;
@@ -158,7 +184,7 @@
id = mdl_ack->id;
/*
* Simple integrity check for processing a stale (and possibly
- * inconsistent mailbox): make sure the buffer id is in the
+ * inconsistent mailbox): make sure the MDL id is in the
* valid range for the stream.
*
* We go through the trouble of dealing with stale mailboxes
@@ -169,44 +195,42 @@
* There are occasions when we get a half changed mailbox,
* which this check catches for a handle & id mismatch. If the
* handle and id do correspond, the worst case is that we
- * completely lost the old buffer, but pick up the new buffer
+ * completely lost the old MDL, but pick up the new MDL
* early (but the new mdl_ack is guaranteed to be good in this
* case as the firmware wouldn't point us to a new mdl_ack until
* it's filled in).
*
- * cx18_queue_get buf() will detect the lost buffers
+ * cx18_queue_get_mdl() will detect the lost MDLs
* and send them back to q_free for fw rotation eventually.
*/
if ((order->flags & CX18_F_EWO_MB_STALE_UPON_RECEIPT) &&
- !(id >= s->mdl_offset &&
- id < (s->mdl_offset + s->buffers))) {
+ !(id >= s->mdl_base_idx &&
+ id < (s->mdl_base_idx + s->buffers))) {
CX18_WARN("Fell behind! Ignoring stale mailbox with "
- " inconsistent data. Lost buffer for mailbox "
+ " inconsistent data. Lost MDL for mailbox "
"seq no %d\n", mb->request);
break;
}
- buf = cx18_queue_get_buf(s, id, mdl_ack->data_used);
+ mdl = cx18_queue_get_mdl(s, id, mdl_ack->data_used);
- CX18_DEBUG_HI_DMA("DMA DONE for %s (buffer %d)\n", s->name, id);
- if (buf == NULL) {
- CX18_WARN("Could not find buf %d for stream %s\n",
+ CX18_DEBUG_HI_DMA("DMA DONE for %s (MDL %d)\n", s->name, id);
+ if (mdl == NULL) {
+ CX18_WARN("Could not find MDL %d for stream %s\n",
id, s->name);
continue;
}
CX18_DEBUG_HI_DMA("%s recv bytesused = %d\n",
- s->name, buf->bytesused);
+ s->name, mdl->bytesused);
if (s->type != CX18_ENC_STREAM_TYPE_TS)
- cx18_enqueue(s, buf, &s->q_full);
+ cx18_enqueue(s, mdl, &s->q_full);
else {
- if (s->dvb.enabled)
- dvb_dmx_swfilter(&s->dvb.demux, buf->buf,
- buf->bytesused);
- cx18_enqueue(s, buf, &s->q_free);
+ cx18_mdl_send_to_dvb(s, mdl);
+ cx18_enqueue(s, mdl, &s->q_free);
}
}
- /* Put as many buffers as possible back into fw use */
+ /* Put as many MDLs as possible back into fw use */
cx18_stream_load_fw_queue(s);
wake_up(&cx->dma_waitq);
@@ -616,7 +640,7 @@
/*
* Wait for XPU to perform extra actions for the caller in some cases.
- * e.g. CX18_CPU_DE_RELEASE_MDL will cause the CPU to send all buffers
+ * e.g. CX18_CPU_DE_RELEASE_MDL will cause the CPU to send all MDLs
* back in a burst shortly thereafter
*/
if (info->flags & API_SLOW)
diff --git a/drivers/media/video/cx18/cx18-mailbox.h b/drivers/media/video/cx18/cx18-mailbox.h
index e23aaac..33a3491 100644
--- a/drivers/media/video/cx18/cx18-mailbox.h
+++ b/drivers/media/video/cx18/cx18-mailbox.h
@@ -39,14 +39,14 @@
struct cx18;
/*
- * This structure is used by CPU to provide completed buffers information
- * Its structure is dictrated by the layout of the SCB, required by the
- * firmware, but its defintion needs to be here, instead of in cx18-scb.h,
+ * This structure is used by CPU to provide completed MDL & buffers information.
+ * Its structure is dictated by the layout of the SCB, required by the
+ * firmware, but its definition needs to be here, instead of in cx18-scb.h,
* for mailbox work order scheduling
*/
struct cx18_mdl_ack {
u32 id; /* ID of a completed MDL */
- u32 data_used; /* Total data filled in the MDL for buffer 'id' */
+ u32 data_used; /* Total data filled in the MDL with 'id' */
};
/* The cx18_mailbox struct is the mailbox structure which is used for passing
diff --git a/drivers/media/video/cx18/cx18-queue.c b/drivers/media/video/cx18/cx18-queue.c
index fa1ed78..6330482 100644
--- a/drivers/media/video/cx18/cx18-queue.c
+++ b/drivers/media/video/cx18/cx18-queue.c
@@ -26,6 +26,7 @@
#include "cx18-queue.h"
#include "cx18-streams.h"
#include "cx18-scb.h"
+#include "cx18-io.h"
void cx18_buf_swap(struct cx18_buffer *buf)
{
@@ -35,151 +36,312 @@
swab32s((u32 *)(buf->buf + i));
}
+void _cx18_mdl_swap(struct cx18_mdl *mdl)
+{
+ struct cx18_buffer *buf;
+
+ list_for_each_entry(buf, &mdl->buf_list, list) {
+ if (buf->bytesused == 0)
+ break;
+ cx18_buf_swap(buf);
+ }
+}
+
void cx18_queue_init(struct cx18_queue *q)
{
INIT_LIST_HEAD(&q->list);
- atomic_set(&q->buffers, 0);
+ atomic_set(&q->depth, 0);
q->bytesused = 0;
}
-struct cx18_queue *_cx18_enqueue(struct cx18_stream *s, struct cx18_buffer *buf,
+struct cx18_queue *_cx18_enqueue(struct cx18_stream *s, struct cx18_mdl *mdl,
struct cx18_queue *q, int to_front)
{
- /* clear the buffer if it is not to be enqueued to the full queue */
+ /* clear the mdl if it is not to be enqueued to the full queue */
if (q != &s->q_full) {
- buf->bytesused = 0;
- buf->readpos = 0;
- buf->b_flags = 0;
- buf->skipped = 0;
+ mdl->bytesused = 0;
+ mdl->readpos = 0;
+ mdl->m_flags = 0;
+ mdl->skipped = 0;
+ mdl->curr_buf = NULL;
}
/* q_busy is restricted to a max buffer count imposed by firmware */
if (q == &s->q_busy &&
- atomic_read(&q->buffers) >= CX18_MAX_FW_MDLS_PER_STREAM)
+ atomic_read(&q->depth) >= CX18_MAX_FW_MDLS_PER_STREAM)
q = &s->q_free;
spin_lock(&q->lock);
if (to_front)
- list_add(&buf->list, &q->list); /* LIFO */
+ list_add(&mdl->list, &q->list); /* LIFO */
else
- list_add_tail(&buf->list, &q->list); /* FIFO */
- q->bytesused += buf->bytesused - buf->readpos;
- atomic_inc(&q->buffers);
+ list_add_tail(&mdl->list, &q->list); /* FIFO */
+ q->bytesused += mdl->bytesused - mdl->readpos;
+ atomic_inc(&q->depth);
spin_unlock(&q->lock);
return q;
}
-struct cx18_buffer *cx18_dequeue(struct cx18_stream *s, struct cx18_queue *q)
+struct cx18_mdl *cx18_dequeue(struct cx18_stream *s, struct cx18_queue *q)
{
- struct cx18_buffer *buf = NULL;
+ struct cx18_mdl *mdl = NULL;
spin_lock(&q->lock);
if (!list_empty(&q->list)) {
- buf = list_first_entry(&q->list, struct cx18_buffer, list);
- list_del_init(&buf->list);
- q->bytesused -= buf->bytesused - buf->readpos;
- buf->skipped = 0;
- atomic_dec(&q->buffers);
+ mdl = list_first_entry(&q->list, struct cx18_mdl, list);
+ list_del_init(&mdl->list);
+ q->bytesused -= mdl->bytesused - mdl->readpos;
+ mdl->skipped = 0;
+ atomic_dec(&q->depth);
}
spin_unlock(&q->lock);
- return buf;
+ return mdl;
}
-struct cx18_buffer *cx18_queue_get_buf(struct cx18_stream *s, u32 id,
+static void _cx18_mdl_update_bufs_for_cpu(struct cx18_stream *s,
+ struct cx18_mdl *mdl)
+{
+ struct cx18_buffer *buf;
+ u32 buf_size = s->buf_size;
+ u32 bytesused = mdl->bytesused;
+
+ list_for_each_entry(buf, &mdl->buf_list, list) {
+ buf->readpos = 0;
+ if (bytesused >= buf_size) {
+ buf->bytesused = buf_size;
+ bytesused -= buf_size;
+ } else {
+ buf->bytesused = bytesused;
+ bytesused = 0;
+ }
+ cx18_buf_sync_for_cpu(s, buf);
+ }
+}
+
+static inline void cx18_mdl_update_bufs_for_cpu(struct cx18_stream *s,
+ struct cx18_mdl *mdl)
+{
+ struct cx18_buffer *buf;
+
+ if (list_is_singular(&mdl->buf_list)) {
+ buf = list_first_entry(&mdl->buf_list, struct cx18_buffer,
+ list);
+ buf->bytesused = mdl->bytesused;
+ buf->readpos = 0;
+ cx18_buf_sync_for_cpu(s, buf);
+ } else {
+ _cx18_mdl_update_bufs_for_cpu(s, mdl);
+ }
+}
+
+struct cx18_mdl *cx18_queue_get_mdl(struct cx18_stream *s, u32 id,
u32 bytesused)
{
struct cx18 *cx = s->cx;
- struct cx18_buffer *buf;
- struct cx18_buffer *tmp;
- struct cx18_buffer *ret = NULL;
+ struct cx18_mdl *mdl;
+ struct cx18_mdl *tmp;
+ struct cx18_mdl *ret = NULL;
LIST_HEAD(sweep_up);
/*
* We don't have to acquire multiple q locks here, because we are
* serialized by the single threaded work handler.
- * Buffers from the firmware will thus remain in order as
+ * MDLs from the firmware will thus remain in order as
* they are moved from q_busy to q_full or to the dvb ring buffer.
*/
spin_lock(&s->q_busy.lock);
- list_for_each_entry_safe(buf, tmp, &s->q_busy.list, list) {
+ list_for_each_entry_safe(mdl, tmp, &s->q_busy.list, list) {
/*
* We should find what the firmware told us is done,
* right at the front of the queue. If we don't, we likely have
- * missed a buffer done message from the firmware.
- * Once we skip a buffer repeatedly, relative to the size of
+ * missed an mdl done message from the firmware.
+ * Once we skip an mdl repeatedly, relative to the size of
* q_busy, we have high confidence we've missed it.
*/
- if (buf->id != id) {
- buf->skipped++;
- if (buf->skipped >= atomic_read(&s->q_busy.buffers)-1) {
- /* buffer must have fallen out of rotation */
- CX18_WARN("Skipped %s, buffer %d, %d "
+ if (mdl->id != id) {
+ mdl->skipped++;
+ if (mdl->skipped >= atomic_read(&s->q_busy.depth)-1) {
+ /* mdl must have fallen out of rotation */
+ CX18_WARN("Skipped %s, MDL %d, %d "
"times - it must have dropped out of "
- "rotation\n", s->name, buf->id,
- buf->skipped);
+ "rotation\n", s->name, mdl->id,
+ mdl->skipped);
/* Sweep it up to put it back into rotation */
- list_move_tail(&buf->list, &sweep_up);
- atomic_dec(&s->q_busy.buffers);
+ list_move_tail(&mdl->list, &sweep_up);
+ atomic_dec(&s->q_busy.depth);
}
continue;
}
/*
- * We pull the desired buffer off of the queue here. Something
+ * We pull the desired mdl off of the queue here. Something
* will have to put it back on a queue later.
*/
- list_del_init(&buf->list);
- atomic_dec(&s->q_busy.buffers);
- ret = buf;
+ list_del_init(&mdl->list);
+ atomic_dec(&s->q_busy.depth);
+ ret = mdl;
break;
}
spin_unlock(&s->q_busy.lock);
/*
- * We found the buffer for which we were looking. Get it ready for
+ * We found the mdl for which we were looking. Get it ready for
* the caller to put on q_full or in the dvb ring buffer.
*/
if (ret != NULL) {
ret->bytesused = bytesused;
ret->skipped = 0;
- /* readpos and b_flags were 0'ed when the buf went on q_busy */
- cx18_buf_sync_for_cpu(s, ret);
+ /* 0'ed readpos, m_flags & curr_buf when mdl went on q_busy */
+ cx18_mdl_update_bufs_for_cpu(s, ret);
if (s->type != CX18_ENC_STREAM_TYPE_TS)
- set_bit(CX18_F_B_NEED_BUF_SWAP, &ret->b_flags);
+ set_bit(CX18_F_M_NEED_SWAP, &ret->m_flags);
}
- /* Put any buffers the firmware is ignoring back into normal rotation */
- list_for_each_entry_safe(buf, tmp, &sweep_up, list) {
- list_del_init(&buf->list);
- cx18_enqueue(s, buf, &s->q_free);
+ /* Put any mdls the firmware is ignoring back into normal rotation */
+ list_for_each_entry_safe(mdl, tmp, &sweep_up, list) {
+ list_del_init(&mdl->list);
+ cx18_enqueue(s, mdl, &s->q_free);
}
return ret;
}
-/* Move all buffers of a queue to q_free, while flushing the buffers */
-static void cx18_queue_flush(struct cx18_stream *s, struct cx18_queue *q)
+/* Move all mdls of a queue, while flushing the mdl */
+static void cx18_queue_flush(struct cx18_stream *s,
+ struct cx18_queue *q_src, struct cx18_queue *q_dst)
{
- struct cx18_buffer *buf;
+ struct cx18_mdl *mdl;
- if (q == &s->q_free)
+ /* It only makes sense to flush to q_free or q_idle */
+ if (q_src == q_dst || q_dst == &s->q_full || q_dst == &s->q_busy)
return;
- spin_lock(&q->lock);
- while (!list_empty(&q->list)) {
- buf = list_first_entry(&q->list, struct cx18_buffer, list);
- list_move_tail(&buf->list, &s->q_free.list);
- buf->bytesused = buf->readpos = buf->b_flags = buf->skipped = 0;
- atomic_inc(&s->q_free.buffers);
+ spin_lock(&q_src->lock);
+ spin_lock(&q_dst->lock);
+ while (!list_empty(&q_src->list)) {
+ mdl = list_first_entry(&q_src->list, struct cx18_mdl, list);
+ list_move_tail(&mdl->list, &q_dst->list);
+ mdl->bytesused = 0;
+ mdl->readpos = 0;
+ mdl->m_flags = 0;
+ mdl->skipped = 0;
+ mdl->curr_buf = NULL;
+ atomic_inc(&q_dst->depth);
}
- cx18_queue_init(q);
- spin_unlock(&q->lock);
+ cx18_queue_init(q_src);
+ spin_unlock(&q_src->lock);
+ spin_unlock(&q_dst->lock);
}
void cx18_flush_queues(struct cx18_stream *s)
{
- cx18_queue_flush(s, &s->q_busy);
- cx18_queue_flush(s, &s->q_full);
+ cx18_queue_flush(s, &s->q_busy, &s->q_free);
+ cx18_queue_flush(s, &s->q_full, &s->q_free);
+}
+
+/*
+ * Note, s->buf_pool is not protected by a lock,
+ * the stream better not have *anything* going on when calling this
+ */
+void cx18_unload_queues(struct cx18_stream *s)
+{
+ struct cx18_queue *q_idle = &s->q_idle;
+ struct cx18_mdl *mdl;
+ struct cx18_buffer *buf;
+
+ /* Move all MDLS to q_idle */
+ cx18_queue_flush(s, &s->q_busy, q_idle);
+ cx18_queue_flush(s, &s->q_full, q_idle);
+ cx18_queue_flush(s, &s->q_free, q_idle);
+
+ /* Reset MDL id's and move all buffers back to the stream's buf_pool */
+ spin_lock(&q_idle->lock);
+ list_for_each_entry(mdl, &q_idle->list, list) {
+ while (!list_empty(&mdl->buf_list)) {
+ buf = list_first_entry(&mdl->buf_list,
+ struct cx18_buffer, list);
+ list_move_tail(&buf->list, &s->buf_pool);
+ buf->bytesused = 0;
+ buf->readpos = 0;
+ }
+ mdl->id = s->mdl_base_idx; /* reset id to a "safe" value */
+ /* all other mdl fields were cleared by cx18_queue_flush() */
+ }
+ spin_unlock(&q_idle->lock);
+}
+
+/*
+ * Note, s->buf_pool is not protected by a lock,
+ * the stream better not have *anything* going on when calling this
+ */
+void cx18_load_queues(struct cx18_stream *s)
+{
+ struct cx18 *cx = s->cx;
+ struct cx18_mdl *mdl;
+ struct cx18_buffer *buf;
+ int mdl_id;
+ int i;
+ u32 partial_buf_size;
+
+ /*
+ * Attach buffers to MDLs, give the MDLs ids, and add MDLs to q_free
+ * Excess MDLs are left on q_idle
+ * Excess buffers are left in buf_pool and/or on an MDL in q_idle
+ */
+ mdl_id = s->mdl_base_idx;
+ for (mdl = cx18_dequeue(s, &s->q_idle), i = s->bufs_per_mdl;
+ mdl != NULL && i == s->bufs_per_mdl;
+ mdl = cx18_dequeue(s, &s->q_idle)) {
+
+ mdl->id = mdl_id;
+
+ for (i = 0; i < s->bufs_per_mdl; i++) {
+ if (list_empty(&s->buf_pool))
+ break;
+
+ buf = list_first_entry(&s->buf_pool, struct cx18_buffer,
+ list);
+ list_move_tail(&buf->list, &mdl->buf_list);
+
+ /* update the firmware's MDL array with this buffer */
+ cx18_writel(cx, buf->dma_handle,
+ &cx->scb->cpu_mdl[mdl_id + i].paddr);
+ cx18_writel(cx, s->buf_size,
+ &cx->scb->cpu_mdl[mdl_id + i].length);
+ }
+
+ if (i == s->bufs_per_mdl) {
+ /*
+ * The encoder doesn't honor s->mdl_size. So in the
+ * case of a non-integral number of buffers to meet
+ * mdl_size, we lie about the size of the last buffer
+ * in the MDL to get the encoder to really only send
+ * us mdl_size bytes per MDL transfer.
+ */
+ partial_buf_size = s->mdl_size % s->buf_size;
+ if (partial_buf_size) {
+ cx18_writel(cx, partial_buf_size,
+ &cx->scb->cpu_mdl[mdl_id + i - 1].length);
+ }
+ cx18_enqueue(s, mdl, &s->q_free);
+ } else {
+ /* Not enough buffers for this MDL; we won't use it */
+ cx18_push(s, mdl, &s->q_idle);
+ }
+ mdl_id += i;
+ }
+}
+
+void _cx18_mdl_sync_for_device(struct cx18_stream *s, struct cx18_mdl *mdl)
+{
+ int dma = s->dma;
+ u32 buf_size = s->buf_size;
+ struct pci_dev *pci_dev = s->cx->pci_dev;
+ struct cx18_buffer *buf;
+
+ list_for_each_entry(buf, &mdl->buf_list, list)
+ pci_dma_sync_single_for_device(pci_dev, buf->dma_handle,
+ buf_size, dma);
}
int cx18_stream_alloc(struct cx18_stream *s)
@@ -190,44 +352,62 @@
if (s->buffers == 0)
return 0;
- CX18_DEBUG_INFO("Allocate %s stream: %d x %d buffers (%dkB total)\n",
+ CX18_DEBUG_INFO("Allocate %s stream: %d x %d buffers "
+ "(%d.%02d kB total)\n",
s->name, s->buffers, s->buf_size,
- s->buffers * s->buf_size / 1024);
+ s->buffers * s->buf_size / 1024,
+ (s->buffers * s->buf_size * 100 / 1024) % 100);
- if (((char __iomem *)&cx->scb->cpu_mdl[cx->mdl_offset + s->buffers] -
+ if (((char __iomem *)&cx->scb->cpu_mdl[cx->free_mdl_idx + s->buffers] -
(char __iomem *)cx->scb) > SCB_RESERVED_SIZE) {
unsigned bufsz = (((char __iomem *)cx->scb) + SCB_RESERVED_SIZE -
((char __iomem *)cx->scb->cpu_mdl));
CX18_ERR("Too many buffers, cannot fit in SCB area\n");
CX18_ERR("Max buffers = %zd\n",
- bufsz / sizeof(struct cx18_mdl));
+ bufsz / sizeof(struct cx18_mdl_ent));
return -ENOMEM;
}
- s->mdl_offset = cx->mdl_offset;
+ s->mdl_base_idx = cx->free_mdl_idx;
- /* allocate stream buffers. Initially all buffers are in q_free. */
+ /* allocate stream buffers and MDLs */
for (i = 0; i < s->buffers; i++) {
- struct cx18_buffer *buf = kzalloc(sizeof(struct cx18_buffer),
- GFP_KERNEL|__GFP_NOWARN);
+ struct cx18_mdl *mdl;
+ struct cx18_buffer *buf;
- if (buf == NULL)
+ /* 1 MDL per buffer to handle the worst & also default case */
+ mdl = kzalloc(sizeof(struct cx18_mdl), GFP_KERNEL|__GFP_NOWARN);
+ if (mdl == NULL)
break;
+
+ buf = kzalloc(sizeof(struct cx18_buffer),
+ GFP_KERNEL|__GFP_NOWARN);
+ if (buf == NULL) {
+ kfree(mdl);
+ break;
+ }
+
buf->buf = kmalloc(s->buf_size, GFP_KERNEL|__GFP_NOWARN);
if (buf->buf == NULL) {
+ kfree(mdl);
kfree(buf);
break;
}
- buf->id = cx->buffer_id++;
+
+ INIT_LIST_HEAD(&mdl->list);
+ INIT_LIST_HEAD(&mdl->buf_list);
+ mdl->id = s->mdl_base_idx; /* a somewhat safe value */
+ cx18_enqueue(s, mdl, &s->q_idle);
+
INIT_LIST_HEAD(&buf->list);
buf->dma_handle = pci_map_single(s->cx->pci_dev,
buf->buf, s->buf_size, s->dma);
cx18_buf_sync_for_cpu(s, buf);
- cx18_enqueue(s, buf, &s->q_free);
+ list_add_tail(&buf->list, &s->buf_pool);
}
if (i == s->buffers) {
- cx->mdl_offset += s->buffers;
+ cx->free_mdl_idx += s->buffers;
return 0;
}
CX18_ERR("Couldn't allocate buffers for %s stream\n", s->name);
@@ -237,13 +417,21 @@
void cx18_stream_free(struct cx18_stream *s)
{
+ struct cx18_mdl *mdl;
struct cx18_buffer *buf;
- /* move all buffers to q_free */
- cx18_flush_queues(s);
+ /* move all buffers to buf_pool and all MDLs to q_idle */
+ cx18_unload_queues(s);
- /* empty q_free */
- while ((buf = cx18_dequeue(s, &s->q_free))) {
+ /* empty q_idle */
+ while ((mdl = cx18_dequeue(s, &s->q_idle)))
+ kfree(mdl);
+
+ /* empty buf_pool */
+ while (!list_empty(&s->buf_pool)) {
+ buf = list_first_entry(&s->buf_pool, struct cx18_buffer, list);
+ list_del_init(&buf->list);
+
pci_unmap_single(s->cx->pci_dev, buf->dma_handle,
s->buf_size, s->dma);
kfree(buf->buf);
diff --git a/drivers/media/video/cx18/cx18-queue.h b/drivers/media/video/cx18/cx18-queue.h
index 4de0626..88a6d34 100644
--- a/drivers/media/video/cx18/cx18-queue.h
+++ b/drivers/media/video/cx18/cx18-queue.h
@@ -40,32 +40,59 @@
s->buf_size, s->dma);
}
+void _cx18_mdl_sync_for_device(struct cx18_stream *s, struct cx18_mdl *mdl);
+
+static inline void cx18_mdl_sync_for_device(struct cx18_stream *s,
+ struct cx18_mdl *mdl)
+{
+ if (list_is_singular(&mdl->buf_list))
+ cx18_buf_sync_for_device(s, list_first_entry(&mdl->buf_list,
+ struct cx18_buffer,
+ list));
+ else
+ _cx18_mdl_sync_for_device(s, mdl);
+}
+
void cx18_buf_swap(struct cx18_buffer *buf);
+void _cx18_mdl_swap(struct cx18_mdl *mdl);
+
+static inline void cx18_mdl_swap(struct cx18_mdl *mdl)
+{
+ if (list_is_singular(&mdl->buf_list))
+ cx18_buf_swap(list_first_entry(&mdl->buf_list,
+ struct cx18_buffer, list));
+ else
+ _cx18_mdl_swap(mdl);
+}
/* cx18_queue utility functions */
-struct cx18_queue *_cx18_enqueue(struct cx18_stream *s, struct cx18_buffer *buf,
+struct cx18_queue *_cx18_enqueue(struct cx18_stream *s, struct cx18_mdl *mdl,
struct cx18_queue *q, int to_front);
static inline
-struct cx18_queue *cx18_enqueue(struct cx18_stream *s, struct cx18_buffer *buf,
+struct cx18_queue *cx18_enqueue(struct cx18_stream *s, struct cx18_mdl *mdl,
struct cx18_queue *q)
{
- return _cx18_enqueue(s, buf, q, 0); /* FIFO */
+ return _cx18_enqueue(s, mdl, q, 0); /* FIFO */
}
static inline
-struct cx18_queue *cx18_push(struct cx18_stream *s, struct cx18_buffer *buf,
+struct cx18_queue *cx18_push(struct cx18_stream *s, struct cx18_mdl *mdl,
struct cx18_queue *q)
{
- return _cx18_enqueue(s, buf, q, 1); /* LIFO */
+ return _cx18_enqueue(s, mdl, q, 1); /* LIFO */
}
void cx18_queue_init(struct cx18_queue *q);
-struct cx18_buffer *cx18_dequeue(struct cx18_stream *s, struct cx18_queue *q);
-struct cx18_buffer *cx18_queue_get_buf(struct cx18_stream *s, u32 id,
+struct cx18_mdl *cx18_dequeue(struct cx18_stream *s, struct cx18_queue *q);
+struct cx18_mdl *cx18_queue_get_mdl(struct cx18_stream *s, u32 id,
u32 bytesused);
void cx18_flush_queues(struct cx18_stream *s);
+/* queue MDL reconfiguration helpers */
+void cx18_unload_queues(struct cx18_stream *s);
+void cx18_load_queues(struct cx18_stream *s);
+
/* cx18_stream utility functions */
int cx18_stream_alloc(struct cx18_stream *s);
void cx18_stream_free(struct cx18_stream *s);
diff --git a/drivers/media/video/cx18/cx18-scb.h b/drivers/media/video/cx18/cx18-scb.h
index 1dc1c43..368f23d 100644
--- a/drivers/media/video/cx18/cx18-scb.h
+++ b/drivers/media/video/cx18/cx18-scb.h
@@ -81,7 +81,7 @@
/* This structure is used by EPU to provide memory descriptors in its memory */
-struct cx18_mdl {
+struct cx18_mdl_ent {
u32 paddr; /* Physical address of a buffer segment */
u32 length; /* Length of the buffer segment */
};
@@ -272,7 +272,7 @@
struct cx18_mailbox ppu2epu_mb;
struct cx18_mdl_ack cpu_mdl_ack[CX18_MAX_STREAMS][CX18_MAX_MDL_ACKS];
- struct cx18_mdl cpu_mdl[1];
+ struct cx18_mdl_ent cpu_mdl[1];
};
void cx18_init_scb(struct cx18 *cx);
diff --git a/drivers/media/video/cx18/cx18-streams.c b/drivers/media/video/cx18/cx18-streams.c
index 7df513a2..c398651 100644
--- a/drivers/media/video/cx18/cx18-streams.c
+++ b/drivers/media/video/cx18/cx18-streams.c
@@ -115,6 +115,9 @@
s->dma = cx18_stream_info[type].dma;
s->buffers = cx->stream_buffers[type];
s->buf_size = cx->stream_buf_size[type];
+ INIT_LIST_HEAD(&s->buf_pool);
+ s->bufs_per_mdl = 1;
+ s->mdl_size = s->buf_size * s->bufs_per_mdl;
init_waitqueue_head(&s->waitq);
s->id = -1;
@@ -124,6 +127,8 @@
cx18_queue_init(&s->q_busy);
spin_lock_init(&s->q_full.lock);
cx18_queue_init(&s->q_full);
+ spin_lock_init(&s->q_idle.lock);
+ cx18_queue_init(&s->q_idle);
INIT_WORK(&s->out_work_order, cx18_out_work_handler);
}
@@ -257,9 +262,11 @@
switch (vfl_type) {
case VFL_TYPE_GRABBER:
- CX18_INFO("Registered device video%d for %s (%d x %d kB)\n",
+ CX18_INFO("Registered device video%d for %s "
+ "(%d x %d.%02d kB)\n",
num, s->name, cx->stream_buffers[type],
- cx->stream_buf_size[type]/1024);
+ cx->stream_buf_size[type] / 1024,
+ (cx->stream_buf_size[type] * 100 / 1024) % 100);
break;
case VFL_TYPE_RADIO:
@@ -441,8 +448,8 @@
}
static
-struct cx18_queue *_cx18_stream_put_buf_fw(struct cx18_stream *s,
- struct cx18_buffer *buf)
+struct cx18_queue *_cx18_stream_put_mdl_fw(struct cx18_stream *s,
+ struct cx18_mdl *mdl)
{
struct cx18 *cx = s->cx;
struct cx18_queue *q;
@@ -451,16 +458,16 @@
if (s->handle == CX18_INVALID_TASK_HANDLE ||
test_bit(CX18_F_S_STOPPING, &s->s_flags) ||
!test_bit(CX18_F_S_STREAMING, &s->s_flags))
- return cx18_enqueue(s, buf, &s->q_free);
+ return cx18_enqueue(s, mdl, &s->q_free);
- q = cx18_enqueue(s, buf, &s->q_busy);
+ q = cx18_enqueue(s, mdl, &s->q_busy);
if (q != &s->q_busy)
- return q; /* The firmware has the max buffers it can handle */
+ return q; /* The firmware has the max MDLs it can handle */
- cx18_buf_sync_for_device(s, buf);
+ cx18_mdl_sync_for_device(s, mdl);
cx18_vapi(cx, CX18_CPU_DE_SET_MDL, 5, s->handle,
- (void __iomem *) &cx->scb->cpu_mdl[buf->id] - cx->enc_mem,
- 1, buf->id, s->buf_size);
+ (void __iomem *) &cx->scb->cpu_mdl[mdl->id] - cx->enc_mem,
+ s->bufs_per_mdl, mdl->id, s->mdl_size);
return q;
}
@@ -468,19 +475,19 @@
void _cx18_stream_load_fw_queue(struct cx18_stream *s)
{
struct cx18_queue *q;
- struct cx18_buffer *buf;
+ struct cx18_mdl *mdl;
- if (atomic_read(&s->q_free.buffers) == 0 ||
- atomic_read(&s->q_busy.buffers) >= CX18_MAX_FW_MDLS_PER_STREAM)
+ if (atomic_read(&s->q_free.depth) == 0 ||
+ atomic_read(&s->q_busy.depth) >= CX18_MAX_FW_MDLS_PER_STREAM)
return;
/* Move from q_free to q_busy notifying the firmware, until the limit */
do {
- buf = cx18_dequeue(s, &s->q_free);
- if (buf == NULL)
+ mdl = cx18_dequeue(s, &s->q_free);
+ if (mdl == NULL)
break;
- q = _cx18_stream_put_buf_fw(s, buf);
- } while (atomic_read(&s->q_busy.buffers) < CX18_MAX_FW_MDLS_PER_STREAM
+ q = _cx18_stream_put_mdl_fw(s, mdl);
+ } while (atomic_read(&s->q_busy.depth) < CX18_MAX_FW_MDLS_PER_STREAM
&& q == &s->q_busy);
}
@@ -492,11 +499,51 @@
_cx18_stream_load_fw_queue(s);
}
+static void cx18_stream_configure_mdls(struct cx18_stream *s)
+{
+ cx18_unload_queues(s);
+
+ switch (s->type) {
+ case CX18_ENC_STREAM_TYPE_YUV:
+ /*
+ * Height should be a multiple of 32 lines.
+ * Set the MDL size to the exact size needed for one frame.
+ * Use enough buffers per MDL to cover the MDL size
+ */
+ s->mdl_size = 720 * s->cx->params.height * 3 / 2;
+ s->bufs_per_mdl = s->mdl_size / s->buf_size;
+ if (s->mdl_size % s->buf_size)
+ s->bufs_per_mdl++;
+ break;
+ case CX18_ENC_STREAM_TYPE_VBI:
+ s->bufs_per_mdl = 1;
+ if (cx18_raw_vbi(s->cx)) {
+ s->mdl_size = (s->cx->is_60hz ? 12 : 18)
+ * 2 * vbi_active_samples;
+ } else {
+ /*
+ * See comment in cx18_vbi_setup() below about the
+ * extra lines we capture in sliced VBI mode due to
+ * the lines on which EAV RP codes toggle.
+ */
+ s->mdl_size = s->cx->is_60hz
+ ? (21 - 4 + 1) * 2 * vbi_hblank_samples_60Hz
+ : (23 - 2 + 1) * 2 * vbi_hblank_samples_50Hz;
+ }
+ break;
+ default:
+ s->bufs_per_mdl = 1;
+ s->mdl_size = s->buf_size * s->bufs_per_mdl;
+ break;
+ }
+
+ cx18_load_queues(s);
+}
+
int cx18_start_v4l2_encode_stream(struct cx18_stream *s)
{
u32 data[MAX_MB_ARGUMENTS];
struct cx18 *cx = s->cx;
- struct cx18_buffer *buf;
int captype = 0;
struct cx18_api_func_private priv;
@@ -619,14 +666,7 @@
(void __iomem *)&cx->scb->cpu_mdl_ack[s->type][1] - cx->enc_mem);
/* Init all the cpu_mdls for this stream */
- cx18_flush_queues(s);
- spin_lock(&s->q_free.lock);
- list_for_each_entry(buf, &s->q_free.list, list) {
- cx18_writel(cx, buf->dma_handle,
- &cx->scb->cpu_mdl[buf->id].paddr);
- cx18_writel(cx, s->buf_size, &cx->scb->cpu_mdl[buf->id].length);
- }
- spin_unlock(&s->q_free.lock);
+ cx18_stream_configure_mdls(s);
_cx18_stream_load_fw_queue(s);
/* begin_capture */
diff --git a/drivers/media/video/cx18/cx18-streams.h b/drivers/media/video/cx18/cx18-streams.h
index 1afc3fd..4a01db5 100644
--- a/drivers/media/video/cx18/cx18-streams.h
+++ b/drivers/media/video/cx18/cx18-streams.h
@@ -28,18 +28,18 @@
int cx18_streams_register(struct cx18 *cx);
void cx18_streams_cleanup(struct cx18 *cx, int unregister);
-/* Related to submission of buffers to firmware */
+/* Related to submission of mdls to firmware */
static inline void cx18_stream_load_fw_queue(struct cx18_stream *s)
{
struct cx18 *cx = s->cx;
queue_work(cx->out_work_queue, &s->out_work_order);
}
-static inline void cx18_stream_put_buf_fw(struct cx18_stream *s,
- struct cx18_buffer *buf)
+static inline void cx18_stream_put_mdl_fw(struct cx18_stream *s,
+ struct cx18_mdl *mdl)
{
- /* Put buf on q_free; the out work handler will move buf(s) to q_busy */
- cx18_enqueue(s, buf, &s->q_free);
+ /* Put mdl on q_free; the out work handler will move mdl(s) to q_busy */
+ cx18_enqueue(s, mdl, &s->q_free);
cx18_stream_load_fw_queue(s);
}
diff --git a/drivers/media/video/cx18/cx18-vbi.c b/drivers/media/video/cx18/cx18-vbi.c
index c2aef4a..574c1c6 100644
--- a/drivers/media/video/cx18/cx18-vbi.c
+++ b/drivers/media/video/cx18/cx18-vbi.c
@@ -105,6 +105,7 @@
/* Compress raw VBI format, removes leading SAV codes and surplus space
after the frame. Returns new compressed size. */
+/* FIXME - this function ignores the input size. */
static u32 compress_raw_buf(struct cx18 *cx, u8 *buf, u32 size, u32 hdr_size)
{
u32 line_size = vbi_active_samples;
@@ -185,8 +186,7 @@
return line;
}
-void cx18_process_vbi_data(struct cx18 *cx, struct cx18_buffer *buf,
- int streamtype)
+static void _cx18_process_vbi_data(struct cx18 *cx, struct cx18_buffer *buf)
{
/*
* The CX23418 provides a 12 byte header in its raw VBI buffers to us:
@@ -203,9 +203,6 @@
u32 pts;
int lines;
- if (streamtype != CX18_ENC_STREAM_TYPE_VBI)
- return;
-
/*
* The CX23418 sends us data that is 32 bit little-endian swapped,
* but we want the raw VBI bytes in the order they were in the raster
@@ -250,3 +247,31 @@
copy_vbi_data(cx, lines, pts);
cx->vbi.frame++;
}
+
+void cx18_process_vbi_data(struct cx18 *cx, struct cx18_mdl *mdl,
+ int streamtype)
+{
+ struct cx18_buffer *buf;
+ u32 orig_used;
+
+ if (streamtype != CX18_ENC_STREAM_TYPE_VBI)
+ return;
+
+ /*
+ * Big assumption here:
+ * Every buffer hooked to the MDL's buf_list is a complete VBI frame
+ * that ends at the end of the buffer.
+ *
+ * To assume anything else would make the code in this file
+ * more complex, or require extra memcpy()'s to make the
+ * buffers satisfy the above assumption. It's just simpler to set
+ * up the encoder buffer transfers to make the assumption true.
+ */
+ list_for_each_entry(buf, &mdl->buf_list, list) {
+ orig_used = buf->bytesused;
+ if (orig_used == 0)
+ break;
+ _cx18_process_vbi_data(cx, buf);
+ mdl->bytesused -= (orig_used - buf->bytesused);
+ }
+}
diff --git a/drivers/media/video/cx18/cx18-vbi.h b/drivers/media/video/cx18/cx18-vbi.h
index e7e1ae4..b365cf4 100644
--- a/drivers/media/video/cx18/cx18-vbi.h
+++ b/drivers/media/video/cx18/cx18-vbi.h
@@ -21,6 +21,6 @@
* 02111-1307 USA
*/
-void cx18_process_vbi_data(struct cx18 *cx, struct cx18_buffer *buf,
+void cx18_process_vbi_data(struct cx18 *cx, struct cx18_mdl *mdl,
int streamtype);
int cx18_used_line(struct cx18 *cx, int line, int field);
diff --git a/drivers/media/video/cx18/cx18-version.h b/drivers/media/video/cx18/cx18-version.h
index 45494b0..9c0b5bb 100644
--- a/drivers/media/video/cx18/cx18-version.h
+++ b/drivers/media/video/cx18/cx18-version.h
@@ -24,7 +24,7 @@
#define CX18_DRIVER_NAME "cx18"
#define CX18_DRIVER_VERSION_MAJOR 1
-#define CX18_DRIVER_VERSION_MINOR 2
+#define CX18_DRIVER_VERSION_MINOR 3
#define CX18_DRIVER_VERSION_PATCHLEVEL 0
#define CX18_VERSION __stringify(CX18_DRIVER_VERSION_MAJOR) "." __stringify(CX18_DRIVER_VERSION_MINOR) "." __stringify(CX18_DRIVER_VERSION_PATCHLEVEL)
diff --git a/drivers/media/video/cx18/cx23418.h b/drivers/media/video/cx18/cx23418.h
index 9956abf..868806e 100644
--- a/drivers/media/video/cx18/cx23418.h
+++ b/drivers/media/video/cx18/cx23418.h
@@ -363,7 +363,7 @@
/* Description: This command provides the offset to a Memory Descriptor List
IN[0] - Task handle. Handle of the task to start
IN[1] - Offset of the MDL from the beginning of the local DDR.
- IN[2] - Number of cx18_mdl structures in the array pointed to by IN[1]
+ IN[2] - Number of cx18_mdl_ent structures in the array pointed to by IN[1]
IN[3] - Buffer ID
IN[4] - Total buffer length
ReturnCode - One of the ERR_DE_... */
diff --git a/drivers/media/video/cx231xx/cx231xx-avcore.c b/drivers/media/video/cx231xx/cx231xx-avcore.c
index 28f48f4..c217441 100644
--- a/drivers/media/video/cx231xx/cx231xx-avcore.c
+++ b/drivers/media/video/cx231xx/cx231xx-avcore.c
@@ -2414,9 +2414,11 @@
cx231xx_info("No ACK after %d msec -GPIO I2C failed!",
nInit * 10);
- /* readAck
- throuth clock stretch ,slave has given a SCL signal,
- so the SDA data can be directly read. */
+ /*
+ * readAck
+ * through clock stretch, slave has given a SCL signal,
+ * so the SDA data can be directly read.
+ */
status = cx231xx_get_gpio_bit(dev, dev->gpio_dir, (u8 *)&dev->gpio_val);
if ((dev->gpio_val & 1 << dev->board.tuner_sda_gpio) == 0) {
diff --git a/drivers/media/video/cx231xx/cx231xx-input.c b/drivers/media/video/cx231xx/cx231xx-input.c
index 48f22fa..cd135f0 100644
--- a/drivers/media/video/cx231xx/cx231xx-input.c
+++ b/drivers/media/video/cx231xx/cx231xx-input.c
@@ -126,8 +126,7 @@
if (do_sendkey) {
dprintk("sending keypress\n");
- ir_input_keydown(ir->input, &ir->ir, poll_result.rc_data[0],
- poll_result.rc_data[0]);
+ ir_input_keydown(ir->input, &ir->ir, poll_result.rc_data[0]);
ir_input_nokey(ir->input, &ir->ir);
}
@@ -198,7 +197,11 @@
usb_make_path(dev->udev, ir->phys, sizeof(ir->phys));
strlcat(ir->phys, "/input0", sizeof(ir->phys));
- ir_input_init(input_dev, &ir->ir, IR_TYPE_OTHER, dev->board.ir_codes);
+ err = ir_input_init(input_dev, &ir->ir, IR_TYPE_OTHER,
+ dev->board.ir_codes);
+ if (err < 0)
+ goto err_out_free;
+
input_dev->name = ir->name;
input_dev->phys = ir->phys;
input_dev->id.bustype = BUS_USB;
@@ -223,6 +226,7 @@
cx231xx_ir_stop(ir);
dev->ir = NULL;
err_out_free:
+ ir_input_free(input_dev);
input_free_device(input_dev);
kfree(ir);
return err;
@@ -237,6 +241,7 @@
return 0;
cx231xx_ir_stop(ir);
+ ir_input_free(ir->input);
input_unregister_device(ir->input);
kfree(ir);
diff --git a/drivers/media/video/cx231xx/cx231xx-video.c b/drivers/media/video/cx231xx/cx231xx-video.c
index 3650372..d095aa0 100644
--- a/drivers/media/video/cx231xx/cx231xx-video.c
+++ b/drivers/media/video/cx231xx/cx231xx-video.c
@@ -2106,7 +2106,7 @@
}
/* Save some power by putting tuner to sleep */
- call_all(dev, tuner, s_standby);
+ call_all(dev, core, s_power, 0);
/* do this before setting alternate! */
cx231xx_uninit_isoc(dev);
diff --git a/drivers/media/video/cx23885/Kconfig b/drivers/media/video/cx23885/Kconfig
index fd3fc3e..bcdda9a 100644
--- a/drivers/media/video/cx23885/Kconfig
+++ b/drivers/media/video/cx23885/Kconfig
@@ -18,7 +18,9 @@
select DVB_TDA10048 if !DVB_FE_CUSTOMISE
select DVB_LNBP21 if !DVB_FE_CUSTOMISE
select DVB_STV6110 if !DVB_FE_CUSTOMISE
+ select DVB_CX24116 if !DVB_FE_CUSTOMISE
select DVB_STV0900 if !DVB_FE_CUSTOMISE
+ select DVB_DS3000 if !DVB_FE_CUSTOMISE
select MEDIA_TUNER_MT2131 if !MEDIA_TUNER_CUSTOMISE
select MEDIA_TUNER_XC2028 if !MEDIA_TUNER_CUSTOMISE
select MEDIA_TUNER_TDA8290 if !MEDIA_TUNER_CUSTOMISE
diff --git a/drivers/media/video/cx23885/Makefile b/drivers/media/video/cx23885/Makefile
index ab8ea35..5787ae2 100644
--- a/drivers/media/video/cx23885/Makefile
+++ b/drivers/media/video/cx23885/Makefile
@@ -1,6 +1,7 @@
cx23885-objs := cx23885-cards.o cx23885-video.o cx23885-vbi.o \
cx23885-core.o cx23885-i2c.o cx23885-dvb.o cx23885-417.o \
- netup-init.o cimax2.o netup-eeprom.o
+ cx23885-ioctl.o cx23885-ir.o cx23885-input.o cx23888-ir.o \
+ netup-init.o cimax2.o netup-eeprom.o cx23885-f300.o
obj-$(CONFIG_VIDEO_CX23885) += cx23885.o
diff --git a/drivers/media/video/cx23885/cx23885-417.c b/drivers/media/video/cx23885/cx23885-417.c
index 6c3b51c..0eed852 100644
--- a/drivers/media/video/cx23885/cx23885-417.c
+++ b/drivers/media/video/cx23885/cx23885-417.c
@@ -37,6 +37,7 @@
#include <media/cx2341x.h>
#include "cx23885.h"
+#include "cx23885-ioctl.h"
#define CX23885_FIRM_IMAGE_SIZE 376836
#define CX23885_FIRM_IMAGE_NAME "v4l-cx23885-enc.fw"
@@ -318,7 +319,7 @@
}
}
-static int mc417_register_write(struct cx23885_dev *dev, u16 address, u32 value)
+int mc417_register_write(struct cx23885_dev *dev, u16 address, u32 value)
{
u32 regval;
@@ -382,7 +383,7 @@
return mc417_wait_ready(dev);
}
-static int mc417_register_read(struct cx23885_dev *dev, u16 address, u32 *value)
+int mc417_register_read(struct cx23885_dev *dev, u16 address, u32 *value)
{
int retval;
u32 regval;
@@ -1724,6 +1725,11 @@
.vidioc_log_status = vidioc_log_status,
.vidioc_querymenu = vidioc_querymenu,
.vidioc_queryctrl = vidioc_queryctrl,
+ .vidioc_g_chip_ident = cx23885_g_chip_ident,
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+ .vidioc_g_register = cx23885_g_register,
+ .vidioc_s_register = cx23885_s_register,
+#endif
};
static struct video_device cx23885_mpeg_template = {
diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c
index bfdf79f..1ec4816 100644
--- a/drivers/media/video/cx23885/cx23885-cards.c
+++ b/drivers/media/video/cx23885/cx23885-cards.c
@@ -28,6 +28,7 @@
#include "cx23885.h"
#include "tuner-xc2028.h"
#include "netup-init.h"
+#include "cx23888-ir.h"
/* ------------------------------------------------------------------ */
/* board config info */
@@ -199,11 +200,61 @@
},
[CX23885_BOARD_MYGICA_X8506] = {
.name = "Mygica X8506 DMB-TH",
+ .tuner_type = TUNER_XC5000,
+ .tuner_addr = 0x61,
+ .porta = CX23885_ANALOG_VIDEO,
.portb = CX23885_MPEG_DVB,
+ .input = {
+ {
+ .type = CX23885_VMUX_TELEVISION,
+ .vmux = CX25840_COMPOSITE2,
+ },
+ {
+ .type = CX23885_VMUX_COMPOSITE1,
+ .vmux = CX25840_COMPOSITE8,
+ },
+ {
+ .type = CX23885_VMUX_SVIDEO,
+ .vmux = CX25840_SVIDEO_LUMA3 |
+ CX25840_SVIDEO_CHROMA4,
+ },
+ {
+ .type = CX23885_VMUX_COMPONENT,
+ .vmux = CX25840_COMPONENT_ON |
+ CX25840_VIN1_CH1 |
+ CX25840_VIN6_CH2 |
+ CX25840_VIN7_CH3,
+ },
+ },
},
[CX23885_BOARD_MAGICPRO_PROHDTVE2] = {
.name = "Magic-Pro ProHDTV Extreme 2",
+ .tuner_type = TUNER_XC5000,
+ .tuner_addr = 0x61,
+ .porta = CX23885_ANALOG_VIDEO,
.portb = CX23885_MPEG_DVB,
+ .input = {
+ {
+ .type = CX23885_VMUX_TELEVISION,
+ .vmux = CX25840_COMPOSITE2,
+ },
+ {
+ .type = CX23885_VMUX_COMPOSITE1,
+ .vmux = CX25840_COMPOSITE8,
+ },
+ {
+ .type = CX23885_VMUX_SVIDEO,
+ .vmux = CX25840_SVIDEO_LUMA3 |
+ CX25840_SVIDEO_CHROMA4,
+ },
+ {
+ .type = CX23885_VMUX_COMPONENT,
+ .vmux = CX25840_COMPONENT_ON |
+ CX25840_VIN1_CH1 |
+ CX25840_VIN6_CH2 |
+ CX25840_VIN7_CH3,
+ },
+ },
},
[CX23885_BOARD_HAUPPAUGE_HVR1850] = {
.name = "Hauppauge WinTV-HVR1850",
@@ -214,6 +265,15 @@
.name = "Compro VideoMate E800",
.portc = CX23885_MPEG_DVB,
},
+ [CX23885_BOARD_HAUPPAUGE_HVR1290] = {
+ .name = "Hauppauge WinTV-HVR1290",
+ .portc = CX23885_MPEG_DVB,
+ },
+ [CX23885_BOARD_MYGICA_X8558PRO] = {
+ .name = "Mygica X8558 PRO DMB-TH",
+ .portb = CX23885_MPEG_DVB,
+ .portc = CX23885_MPEG_DVB,
+ },
};
const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards);
@@ -349,6 +409,14 @@
.subvendor = 0x1858,
.subdevice = 0xe800,
.card = CX23885_BOARD_COMPRO_VIDEOMATE_E800,
+ }, {
+ .subvendor = 0x0070,
+ .subdevice = 0x8551,
+ .card = CX23885_BOARD_HAUPPAUGE_HVR1290,
+ }, {
+ .subvendor = 0x14f1,
+ .subdevice = 0x8578,
+ .card = CX23885_BOARD_MYGICA_X8558PRO,
},
};
const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids);
@@ -509,9 +577,13 @@
* DVB-T and MPEG2 HW Encoder */
break;
case 85021:
- /* WinTV-HVR1850 (PCIe, OEM, RCA in, IR, FM,
+ /* WinTV-HVR1850 (PCIe, Retail, 3.5mm in, IR, FM,
Dual channel ATSC and MPEG2 HW Encoder */
break;
+ case 85721:
+ /* WinTV-HVR1290 (PCIe, OEM, RCA in, IR,
+ Dual channel ATSC and Basic analog */
+ break;
default:
printk(KERN_WARNING "%s: warning: "
"unknown hauppauge model #%d\n",
@@ -710,10 +782,14 @@
cx_set(GP0_IO, 0x00040004);
break;
case CX23885_BOARD_TBS_6920:
- case CX23885_BOARD_TEVII_S470:
cx_write(MC417_CTL, 0x00000036);
cx_write(MC417_OEN, 0x00001000);
- cx_write(MC417_RWD, 0x00001800);
+ cx_set(MC417_RWD, 0x00000002);
+ mdelay(200);
+ cx_clear(MC417_RWD, 0x00000800);
+ mdelay(200);
+ cx_set(MC417_RWD, 0x00000800);
+ mdelay(200);
break;
case CX23885_BOARD_NETUP_DUAL_DVBS2_CI:
/* GPIO-0 INTA from CiMax1
@@ -758,15 +834,26 @@
break;
case CX23885_BOARD_MYGICA_X8506:
case CX23885_BOARD_MAGICPRO_PROHDTVE2:
+ /* GPIO-0 (0)Analog / (1)Digital TV */
/* GPIO-1 reset XC5000 */
/* GPIO-2 reset LGS8GL5 / LGS8G75 */
- cx_set(GP0_IO, 0x00060000);
- cx_clear(GP0_IO, 0x00000006);
+ cx23885_gpio_enable(dev, GPIO_0 | GPIO_1 | GPIO_2, 1);
+ cx23885_gpio_clear(dev, GPIO_1 | GPIO_2);
mdelay(100);
- cx_set(GP0_IO, 0x00060006);
+ cx23885_gpio_set(dev, GPIO_0 | GPIO_1 | GPIO_2);
+ mdelay(100);
+ break;
+ case CX23885_BOARD_MYGICA_X8558PRO:
+ /* GPIO-0 reset first ATBM8830 */
+ /* GPIO-1 reset second ATBM8830 */
+ cx23885_gpio_enable(dev, GPIO_0 | GPIO_1, 1);
+ cx23885_gpio_clear(dev, GPIO_0 | GPIO_1);
+ mdelay(100);
+ cx23885_gpio_set(dev, GPIO_0 | GPIO_1);
mdelay(100);
break;
case CX23885_BOARD_HAUPPAUGE_HVR1850:
+ case CX23885_BOARD_HAUPPAUGE_HVR1290:
/* GPIO-0 656_CLK */
/* GPIO-1 656_D0 */
/* GPIO-2 Wake# */
@@ -801,6 +888,7 @@
int cx23885_ir_init(struct cx23885_dev *dev)
{
+ int ret = 0;
switch (dev->board) {
case CX23885_BOARD_HAUPPAUGE_HVR1250:
case CX23885_BOARD_HAUPPAUGE_HVR1500:
@@ -812,15 +900,46 @@
case CX23885_BOARD_HAUPPAUGE_HVR1275:
case CX23885_BOARD_HAUPPAUGE_HVR1255:
case CX23885_BOARD_HAUPPAUGE_HVR1210:
- case CX23885_BOARD_HAUPPAUGE_HVR1850:
/* FIXME: Implement me */
break;
+ case CX23885_BOARD_HAUPPAUGE_HVR1850:
+ case CX23885_BOARD_HAUPPAUGE_HVR1290:
+ ret = cx23888_ir_probe(dev);
+ if (ret)
+ break;
+ dev->sd_ir = cx23885_find_hw(dev, CX23885_HW_888_IR);
+ dev->pci_irqmask |= PCI_MSK_IR;
+ break;
case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP:
request_module("ir-kbd-i2c");
break;
}
- return 0;
+ return ret;
+}
+
+void cx23885_ir_fini(struct cx23885_dev *dev)
+{
+ switch (dev->board) {
+ case CX23885_BOARD_HAUPPAUGE_HVR1850:
+ case CX23885_BOARD_HAUPPAUGE_HVR1290:
+ dev->pci_irqmask &= ~PCI_MSK_IR;
+ cx_clear(PCI_INT_MSK, PCI_MSK_IR);
+ cx23888_ir_remove(dev);
+ dev->sd_ir = NULL;
+ break;
+ }
+}
+
+void cx23885_ir_pci_int_enable(struct cx23885_dev *dev)
+{
+ switch (dev->board) {
+ case CX23885_BOARD_HAUPPAUGE_HVR1850:
+ case CX23885_BOARD_HAUPPAUGE_HVR1290:
+ if (dev->sd_ir && (dev->pci_irqmask & PCI_MSK_IR))
+ cx_set(PCI_INT_MSK, PCI_MSK_IR);
+ break;
+ }
}
void cx23885_card_setup(struct cx23885_dev *dev)
@@ -853,6 +972,7 @@
case CX23885_BOARD_HAUPPAUGE_HVR1255:
case CX23885_BOARD_HAUPPAUGE_HVR1210:
case CX23885_BOARD_HAUPPAUGE_HVR1850:
+ case CX23885_BOARD_HAUPPAUGE_HVR1290:
if (dev->i2c_bus[0].i2c_rc == 0)
hauppauge_eeprom(dev, eeprom+0xc0);
break;
@@ -886,8 +1006,12 @@
ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
break;
- case CX23885_BOARD_TEVII_S470:
case CX23885_BOARD_TBS_6920:
+ ts1->gen_ctrl_val = 0x4; /* Parallel */
+ ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
+ ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
+ break;
+ case CX23885_BOARD_TEVII_S470:
case CX23885_BOARD_DVBWORLD_2005:
ts1->gen_ctrl_val = 0x5; /* Parallel */
ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
@@ -907,6 +1031,14 @@
ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
break;
+ case CX23885_BOARD_MYGICA_X8558PRO:
+ ts1->gen_ctrl_val = 0x5; /* Parallel */
+ ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
+ ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
+ ts2->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */
+ ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
+ ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
+ break;
case CX23885_BOARD_HAUPPAUGE_HVR1250:
case CX23885_BOARD_HAUPPAUGE_HVR1500:
case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
@@ -922,6 +1054,7 @@
case CX23885_BOARD_HAUPPAUGE_HVR1210:
case CX23885_BOARD_HAUPPAUGE_HVR1850:
case CX23885_BOARD_COMPRO_VIDEOMATE_E800:
+ case CX23885_BOARD_HAUPPAUGE_HVR1290:
default:
ts2->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */
ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
@@ -939,6 +1072,10 @@
case CX23885_BOARD_COMPRO_VIDEOMATE_E650F:
case CX23885_BOARD_NETUP_DUAL_DVBS2_CI:
case CX23885_BOARD_COMPRO_VIDEOMATE_E800:
+ case CX23885_BOARD_HAUPPAUGE_HVR1850:
+ case CX23885_BOARD_MYGICA_X8506:
+ case CX23885_BOARD_MAGICPRO_PROHDTVE2:
+ case CX23885_BOARD_HAUPPAUGE_HVR1290:
dev->sd_cx25840 = v4l2_i2c_new_subdev(&dev->v4l2_dev,
&dev->i2c_bus[2].i2c_adap,
"cx25840", "cx25840", 0x88 >> 1, NULL);
diff --git a/drivers/media/video/cx23885/cx23885-core.c b/drivers/media/video/cx23885/cx23885-core.c
index c31284b..04b12d2 100644
--- a/drivers/media/video/cx23885/cx23885-core.c
+++ b/drivers/media/video/cx23885/cx23885-core.c
@@ -32,6 +32,9 @@
#include "cx23885.h"
#include "cimax2.h"
+#include "cx23888-ir.h"
+#include "cx23885-ir.h"
+#include "cx23885-input.h"
MODULE_DESCRIPTION("Driver for cx23885 based TV cards");
MODULE_AUTHOR("Steven Toth <stoth@linuxtv.org>");
@@ -753,6 +756,23 @@
__func__, dev->hwrevision);
}
+/* Find the first v4l2_subdev member of the group id in hw */
+struct v4l2_subdev *cx23885_find_hw(struct cx23885_dev *dev, u32 hw)
+{
+ struct v4l2_subdev *result = NULL;
+ struct v4l2_subdev *sd;
+
+ spin_lock(&dev->v4l2_dev.lock);
+ v4l2_device_for_each_subdev(sd, &dev->v4l2_dev) {
+ if (sd->grp_id == hw) {
+ result = sd;
+ break;
+ }
+ }
+ spin_unlock(&dev->v4l2_dev.lock);
+ return result;
+}
+
static int cx23885_dev_setup(struct cx23885_dev *dev)
{
int i;
@@ -899,7 +919,7 @@
cx23885_i2c_register(&dev->i2c_bus[1]);
cx23885_i2c_register(&dev->i2c_bus[2]);
cx23885_card_setup(dev);
- call_all(dev, tuner, s_standby);
+ call_all(dev, core, s_power, 0);
cx23885_ir_init(dev);
if (cx23885_boards[dev->board].porta == CX23885_ANALOG_VIDEO) {
@@ -1637,6 +1657,7 @@
u32 ts1_status, ts1_mask;
u32 ts2_status, ts2_mask;
int vida_count = 0, ts1_count = 0, ts2_count = 0, handled = 0;
+ bool ir_handled = false;
pci_status = cx_read(PCI_INT_STAT);
pci_mask = cx_read(PCI_INT_MSK);
@@ -1662,18 +1683,12 @@
dprintk(7, "ts2_status: 0x%08x ts2_mask: 0x%08x count: 0x%x\n",
ts2_status, ts2_mask, ts2_count);
- if ((pci_status & PCI_MSK_RISC_RD) ||
- (pci_status & PCI_MSK_RISC_WR) ||
- (pci_status & PCI_MSK_AL_RD) ||
- (pci_status & PCI_MSK_AL_WR) ||
- (pci_status & PCI_MSK_APB_DMA) ||
- (pci_status & PCI_MSK_VID_C) ||
- (pci_status & PCI_MSK_VID_B) ||
- (pci_status & PCI_MSK_VID_A) ||
- (pci_status & PCI_MSK_AUD_INT) ||
- (pci_status & PCI_MSK_AUD_EXT) ||
- (pci_status & PCI_MSK_GPIO0) ||
- (pci_status & PCI_MSK_GPIO1)) {
+ if (pci_status & (PCI_MSK_RISC_RD | PCI_MSK_RISC_WR |
+ PCI_MSK_AL_RD | PCI_MSK_AL_WR | PCI_MSK_APB_DMA |
+ PCI_MSK_VID_C | PCI_MSK_VID_B | PCI_MSK_VID_A |
+ PCI_MSK_AUD_INT | PCI_MSK_AUD_EXT |
+ PCI_MSK_GPIO0 | PCI_MSK_GPIO1 |
+ PCI_MSK_IR)) {
if (pci_status & PCI_MSK_RISC_RD)
dprintk(7, " (PCI_MSK_RISC_RD 0x%08x)\n",
@@ -1722,6 +1737,10 @@
if (pci_status & PCI_MSK_GPIO1)
dprintk(7, " (PCI_MSK_GPIO1 0x%08x)\n",
PCI_MSK_GPIO1);
+
+ if (pci_status & PCI_MSK_IR)
+ dprintk(7, " (PCI_MSK_IR 0x%08x)\n",
+ PCI_MSK_IR);
}
if (cx23885_boards[dev->board].cimax > 0 &&
@@ -1752,12 +1771,48 @@
if (vida_status)
handled += cx23885_video_irq(dev, vida_status);
+ if (pci_status & PCI_MSK_IR) {
+ v4l2_subdev_call(dev->sd_ir, ir, interrupt_service_routine,
+ pci_status, &ir_handled);
+ if (ir_handled)
+ handled++;
+ }
+
if (handled)
cx_write(PCI_INT_STAT, pci_status);
out:
return IRQ_RETVAL(handled);
}
+static void cx23885_v4l2_dev_notify(struct v4l2_subdev *sd,
+ unsigned int notification, void *arg)
+{
+ struct cx23885_dev *dev;
+
+ if (sd == NULL)
+ return;
+
+ dev = to_cx23885(sd->v4l2_dev);
+
+ switch (notification) {
+ case V4L2_SUBDEV_IR_RX_NOTIFY: /* Called in an IRQ context */
+ if (sd == dev->sd_ir)
+ cx23885_ir_rx_v4l2_dev_notify(sd, *(u32 *)arg);
+ break;
+ case V4L2_SUBDEV_IR_TX_NOTIFY: /* Called in an IRQ context */
+ if (sd == dev->sd_ir)
+ cx23885_ir_tx_v4l2_dev_notify(sd, *(u32 *)arg);
+ break;
+ }
+}
+
+static void cx23885_v4l2_dev_notify_init(struct cx23885_dev *dev)
+{
+ INIT_WORK(&dev->ir_rx_work, cx23885_ir_rx_work_handler);
+ INIT_WORK(&dev->ir_tx_work, cx23885_ir_tx_work_handler);
+ dev->v4l2_dev.notify = cx23885_v4l2_dev_notify;
+}
+
static inline int encoder_on_portb(struct cx23885_dev *dev)
{
return cx23885_boards[dev->board].portb == CX23885_MPEG_ENCODER;
@@ -1816,6 +1871,26 @@
printk(KERN_INFO "%s: Unsupported\n", dev->name);
}
+u32 cx23885_gpio_get(struct cx23885_dev *dev, u32 mask)
+{
+ if (mask & 0x00000007)
+ return (cx_read(GP0_IO) >> 8) & mask & 0x7;
+
+ if (mask & 0x0007fff8) {
+ if (encoder_on_portb(dev) || encoder_on_portc(dev))
+ printk(KERN_ERR
+ "%s: Reading GPIO moving on encoder ports\n",
+ dev->name);
+ return (cx_read(MC417_RWD) & ((mask & 0x7fff8) >> 3)) << 3;
+ }
+
+ /* TODO: 23-19 */
+ if (mask & 0x00f80000)
+ printk(KERN_INFO "%s: Unsupported\n", dev->name);
+
+ return 0;
+}
+
void cx23885_gpio_enable(struct cx23885_dev *dev, u32 mask, int asoutput)
{
if ((mask & 0x00000007) && asoutput)
@@ -1854,6 +1929,9 @@
if (err < 0)
goto fail_free;
+ /* Prepare to handle notifications from subdevices */
+ cx23885_v4l2_dev_notify_init(dev);
+
/* pci init */
dev->pci = pci_dev;
if (pci_enable_device(pci_dev)) {
@@ -1896,6 +1974,14 @@
break;
}
+ /*
+ * The CX2388[58] IR controller can start firing interrupts when
+ * enabled, so these have to take place after the cx23885_irq() handler
+ * is hooked up by the call to request_irq() above.
+ */
+ cx23885_ir_pci_int_enable(dev);
+ cx23885_input_init(dev);
+
return 0;
fail_irq:
@@ -1912,6 +1998,9 @@
struct v4l2_device *v4l2_dev = pci_get_drvdata(pci_dev);
struct cx23885_dev *dev = to_cx23885(v4l2_dev);
+ cx23885_input_fini(dev);
+ cx23885_ir_fini(dev);
+
cx23885_shutdown(dev);
pci_disable_device(pci_dev);
@@ -1957,7 +2046,7 @@
.resume = NULL,
};
-static int cx23885_init(void)
+static int __init cx23885_init(void)
{
printk(KERN_INFO "cx23885 driver version %d.%d.%d loaded\n",
(CX23885_VERSION_CODE >> 16) & 0xff,
@@ -1970,7 +2059,7 @@
return pci_register_driver(&cx23885_pci_driver);
}
-static void cx23885_fini(void)
+static void __exit cx23885_fini(void)
{
pci_unregister_driver(&cx23885_pci_driver);
}
diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c
index 45e13ee..e45d2df 100644
--- a/drivers/media/video/cx23885/cx23885-dvb.c
+++ b/drivers/media/video/cx23885/cx23885-dvb.c
@@ -38,6 +38,7 @@
#include "tda18271.h"
#include "lgdt330x.h"
#include "xc5000.h"
+#include "max2165.h"
#include "tda10048.h"
#include "tuner-xc2028.h"
#include "tuner-simple.h"
@@ -54,6 +55,9 @@
#include "netup-eeprom.h"
#include "netup-init.h"
#include "lgdt3305.h"
+#include "atbm8830.h"
+#include "ds3000.h"
+#include "cx23885-f300.h"
static unsigned int debug;
@@ -400,6 +404,7 @@
static struct stv0900_config netup_stv0900_config = {
.demod_address = 0x68,
+ .demod_mode = 1, /* dual */
.xtal = 8000000,
.clkmode = 3,/* 0-CLKI, 2-XTALI, else AUTO */
.diseqc_mode = 2,/* 2/3 PWM */
@@ -414,34 +419,22 @@
.i2c_address = 0x60,
.mclk = 16000000,
.clk_div = 1,
+ .gain = 8, /* +16 dB - maximum gain */
};
static struct stv6110_config netup_stv6110_tunerconfig_b = {
.i2c_address = 0x63,
.mclk = 16000000,
.clk_div = 1,
+ .gain = 8, /* +16 dB - maximum gain */
};
-static int tbs_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
-{
- struct cx23885_tsport *port = fe->dvb->priv;
- struct cx23885_dev *dev = port->dev;
-
- if (voltage == SEC_VOLTAGE_18)
- cx_write(MC417_RWD, 0x00001e00);/* GPIO-13 high */
- else if (voltage == SEC_VOLTAGE_13)
- cx_write(MC417_RWD, 0x00001a00);/* GPIO-13 low */
- else
- cx_write(MC417_RWD, 0x00001800);/* GPIO-12 low */
- return 0;
-}
-
static struct cx24116_config tbs_cx24116_config = {
- .demod_address = 0x05,
+ .demod_address = 0x55,
};
-static struct cx24116_config tevii_cx24116_config = {
- .demod_address = 0x55,
+static struct ds3000_config tevii_ds3000_config = {
+ .demod_address = 0x68,
};
static struct cx24116_config dvbworld_cx24116_config = {
@@ -486,11 +479,40 @@
break;
}
break;
+ case CX23885_BOARD_MYGICA_X8506:
+ case CX23885_BOARD_MAGICPRO_PROHDTVE2:
+ /* Select Digital TV */
+ cx23885_gpio_set(dev, GPIO_0);
+ break;
}
- return (port->set_frontend_save) ?
- port->set_frontend_save(fe, param) : -ENODEV;
+ return 0;
}
+static int cx23885_dvb_fe_ioctl_override(struct dvb_frontend *fe,
+ unsigned int cmd, void *parg,
+ unsigned int stage)
+{
+ int err = 0;
+
+ switch (stage) {
+ case DVB_FE_IOCTL_PRE:
+
+ switch (cmd) {
+ case FE_SET_FRONTEND:
+ err = cx23885_dvb_set_frontend(fe,
+ (struct dvb_frontend_parameters *) parg);
+ break;
+ }
+ break;
+
+ case DVB_FE_IOCTL_POST:
+ /* no post-ioctl handling required */
+ break;
+ }
+ return err;
+};
+
+
static struct lgs8gxx_config magicpro_prohdtve2_lgs8g75_config = {
.prod = LGS8GXX_PROD_LGS8G75,
.demod_address = 0x19,
@@ -511,6 +533,38 @@
.if_khz = 6500,
};
+static struct atbm8830_config mygica_x8558pro_atbm8830_cfg1 = {
+ .prod = ATBM8830_PROD_8830,
+ .demod_address = 0x44,
+ .serial_ts = 0,
+ .ts_sampling_edge = 1,
+ .ts_clk_gated = 0,
+ .osc_clk_freq = 30400, /* in kHz */
+ .if_freq = 0, /* zero IF */
+ .zif_swap_iq = 1,
+};
+
+static struct max2165_config mygic_x8558pro_max2165_cfg1 = {
+ .i2c_address = 0x60,
+ .osc_clk = 20
+};
+
+static struct atbm8830_config mygica_x8558pro_atbm8830_cfg2 = {
+ .prod = ATBM8830_PROD_8830,
+ .demod_address = 0x44,
+ .serial_ts = 1,
+ .ts_sampling_edge = 1,
+ .ts_clk_gated = 0,
+ .osc_clk_freq = 30400, /* in kHz */
+ .if_freq = 0, /* zero IF */
+ .zif_swap_iq = 1,
+};
+
+static struct max2165_config mygic_x8558pro_max2165_cfg2 = {
+ .i2c_address = 0x60,
+ .osc_clk = 20
+};
+
static int dvb_register(struct cx23885_tsport *port)
{
struct cx23885_dev *dev = port->dev;
@@ -550,12 +604,6 @@
0x60, &dev->i2c_bus[1].i2c_adap,
&hauppauge_hvr127x_config);
}
-
- /* FIXME: temporary hack */
- /* define bridge override to set_frontend */
- port->set_frontend_save = fe0->dvb.frontend->ops.set_frontend;
- fe0->dvb.frontend->ops.set_frontend = cx23885_dvb_set_frontend;
-
break;
case CX23885_BOARD_HAUPPAUGE_HVR1255:
i2c_bus = &dev->i2c_bus[0];
@@ -772,23 +820,23 @@
}
break;
case CX23885_BOARD_TBS_6920:
- i2c_bus = &dev->i2c_bus[0];
+ i2c_bus = &dev->i2c_bus[1];
fe0->dvb.frontend = dvb_attach(cx24116_attach,
- &tbs_cx24116_config,
- &i2c_bus->i2c_adap);
+ &tbs_cx24116_config,
+ &i2c_bus->i2c_adap);
if (fe0->dvb.frontend != NULL)
- fe0->dvb.frontend->ops.set_voltage = tbs_set_voltage;
+ fe0->dvb.frontend->ops.set_voltage = f300_set_voltage;
break;
case CX23885_BOARD_TEVII_S470:
i2c_bus = &dev->i2c_bus[1];
- fe0->dvb.frontend = dvb_attach(cx24116_attach,
- &tevii_cx24116_config,
- &i2c_bus->i2c_adap);
+ fe0->dvb.frontend = dvb_attach(ds3000_attach,
+ &tevii_ds3000_config,
+ &i2c_bus->i2c_adap);
if (fe0->dvb.frontend != NULL)
- fe0->dvb.frontend->ops.set_voltage = tbs_set_voltage;
+ fe0->dvb.frontend->ops.set_voltage = f300_set_voltage;
break;
case CX23885_BOARD_DVBWORLD_2005:
@@ -814,8 +862,8 @@
if (!dvb_attach(lnbh24_attach,
fe0->dvb.frontend,
&i2c_bus->i2c_adap,
- LNBH24_PCL,
- LNBH24_TTX, 0x09))
+ LNBH24_PCL | LNBH24_TTX,
+ LNBH24_TEN, 0x09))
printk(KERN_ERR
"No LNBH24 found!\n");
@@ -835,8 +883,8 @@
if (!dvb_attach(lnbh24_attach,
fe0->dvb.frontend,
&i2c_bus->i2c_adap,
- LNBH24_PCL,
- LNBH24_TTX, 0x0a))
+ LNBH24_PCL | LNBH24_TTX,
+ LNBH24_TEN, 0x0a))
printk(KERN_ERR
"No LNBH24 found!\n");
@@ -872,6 +920,7 @@
}
break;
case CX23885_BOARD_HAUPPAUGE_HVR1850:
+ case CX23885_BOARD_HAUPPAUGE_HVR1290:
i2c_bus = &dev->i2c_bus[0];
fe0->dvb.frontend = dvb_attach(s5h1411_attach,
&hcw_s5h1411_config,
@@ -881,6 +930,36 @@
0x60, &dev->i2c_bus[0].i2c_adap,
&hauppauge_tda18271_config);
break;
+ case CX23885_BOARD_MYGICA_X8558PRO:
+ switch (port->nr) {
+ /* port B */
+ case 1:
+ i2c_bus = &dev->i2c_bus[0];
+ fe0->dvb.frontend = dvb_attach(atbm8830_attach,
+ &mygica_x8558pro_atbm8830_cfg1,
+ &i2c_bus->i2c_adap);
+ if (fe0->dvb.frontend != NULL) {
+ dvb_attach(max2165_attach,
+ fe0->dvb.frontend,
+ &i2c_bus->i2c_adap,
+ &mygic_x8558pro_max2165_cfg1);
+ }
+ break;
+ /* port C */
+ case 2:
+ i2c_bus = &dev->i2c_bus[1];
+ fe0->dvb.frontend = dvb_attach(atbm8830_attach,
+ &mygica_x8558pro_atbm8830_cfg2,
+ &i2c_bus->i2c_adap);
+ if (fe0->dvb.frontend != NULL) {
+ dvb_attach(max2165_attach,
+ fe0->dvb.frontend,
+ &i2c_bus->i2c_adap,
+ &mygic_x8558pro_max2165_cfg2);
+ }
+ break;
+ }
+ break;
default:
printk(KERN_INFO "%s: The frontend of your DVB/ATSC card "
@@ -897,14 +976,15 @@
fe0->dvb.frontend->callback = cx23885_tuner_callback;
/* Put the analog decoder in standby to keep it quiet */
- call_all(dev, tuner, s_standby);
+ call_all(dev, core, s_power, 0);
if (fe0->dvb.frontend->ops.analog_ops.standby)
fe0->dvb.frontend->ops.analog_ops.standby(fe0->dvb.frontend);
/* register everything */
ret = videobuf_dvb_register_bus(&port->frontends, THIS_MODULE, port,
- &dev->pci->dev, adapter_nr, 0);
+ &dev->pci->dev, adapter_nr, 0,
+ cx23885_dvb_fe_ioctl_override);
/* init CI & MAC */
switch (dev->board) {
@@ -940,7 +1020,7 @@
int err, i;
/* Here we need to allocate the correct number of frontends,
- * as reflected in the cards struct. The reality is that currrently
+ * as reflected in the cards struct. The reality is that currently
* no cx23885 boards support this - yet. But, if we don't modify this
* code then the second frontend would never be allocated (later)
* and fail with error before the attach in dvb_register().
diff --git a/drivers/media/video/cx23885/cx23885-f300.c b/drivers/media/video/cx23885/cx23885-f300.c
new file mode 100644
index 0000000..93998f2
--- /dev/null
+++ b/drivers/media/video/cx23885/cx23885-f300.c
@@ -0,0 +1,177 @@
+/*
+ * Driver for Silicon Labs C8051F300 microcontroller.
+ *
+ * It is used for LNB power control in TeVii S470,
+ * TBS 6920 PCIe DVB-S2 cards.
+ *
+ * Microcontroller connected to cx23885 GPIO pins:
+ * GPIO0 - data - P0.3 F300
+ * GPIO1 - reset - P0.2 F300
+ * GPIO2 - clk - P0.1 F300
+ * GPIO3 - busy - P0.0 F300
+ *
+ * Copyright (C) 2009 Igor M. Liplianin <liplianin@me.by>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include "cx23885.h"
+
+#define F300_DATA GPIO_0
+#define F300_RESET GPIO_1
+#define F300_CLK GPIO_2
+#define F300_BUSY GPIO_3
+
+static void f300_set_line(struct cx23885_dev *dev, u32 line, u8 lvl)
+{
+ cx23885_gpio_enable(dev, line, 1);
+ if (lvl == 1)
+ cx23885_gpio_set(dev, line);
+ else
+ cx23885_gpio_clear(dev, line);
+}
+
+static u8 f300_get_line(struct cx23885_dev *dev, u32 line)
+{
+ cx23885_gpio_enable(dev, line, 0);
+
+ return cx23885_gpio_get(dev, line);
+}
+
+static void f300_send_byte(struct cx23885_dev *dev, u8 dta)
+{
+ u8 i;
+
+ for (i = 0; i < 8; i++) {
+ f300_set_line(dev, F300_CLK, 0);
+ udelay(30);
+ f300_set_line(dev, F300_DATA, (dta & 0x80) >> 7);/* msb first */
+ udelay(30);
+ dta <<= 1;
+ f300_set_line(dev, F300_CLK, 1);
+ udelay(30);
+ }
+}
+
+static u8 f300_get_byte(struct cx23885_dev *dev)
+{
+ u8 i, dta = 0;
+
+ for (i = 0; i < 8; i++) {
+ f300_set_line(dev, F300_CLK, 0);
+ udelay(30);
+ dta <<= 1;
+ f300_set_line(dev, F300_CLK, 1);
+ udelay(30);
+ dta |= f300_get_line(dev, F300_DATA);/* msb first */
+
+ }
+
+ return dta;
+}
+
+static u8 f300_xfer(struct dvb_frontend *fe, u8 *buf)
+{
+ struct cx23885_tsport *port = fe->dvb->priv;
+ struct cx23885_dev *dev = port->dev;
+ u8 i, temp, ret = 0;
+
+ temp = buf[0];
+ for (i = 0; i < buf[0]; i++)
+ temp += buf[i + 1];
+ temp = (~temp + 1);/* get check sum */
+ buf[1 + buf[0]] = temp;
+
+ f300_set_line(dev, F300_RESET, 1);
+ f300_set_line(dev, F300_CLK, 1);
+ udelay(30);
+ f300_set_line(dev, F300_DATA, 1);
+ msleep(1);
+
+ /* question: */
+ f300_set_line(dev, F300_RESET, 0);/* begin to send data */
+ msleep(1);
+
+ f300_send_byte(dev, 0xe0);/* the slave address is 0xe0, write */
+ msleep(1);
+
+ temp = buf[0];
+ temp += 2;
+ for (i = 0; i < temp; i++)
+ f300_send_byte(dev, buf[i]);
+
+ f300_set_line(dev, F300_RESET, 1);/* sent data over */
+ f300_set_line(dev, F300_DATA, 1);
+
+ /* answer: */
+ temp = 0;
+ for (i = 0; ((i < 8) & (temp == 0)); i++) {
+ msleep(1);
+ if (f300_get_line(dev, F300_BUSY) == 0)
+ temp = 1;
+ }
+
+ if (i > 7) {
+ printk(KERN_ERR "%s: timeout, the slave no response\n",
+ __func__);
+ ret = 1; /* timeout, the slave no response */
+ } else { /* the slave not busy, prepare for getting data */
+ f300_set_line(dev, F300_RESET, 0);/*ready...*/
+ msleep(1);
+ f300_send_byte(dev, 0xe1);/* 0xe1 is Read */
+ msleep(1);
+ temp = f300_get_byte(dev);/*get the data length */
+ if (temp > 14)
+ temp = 14;
+
+ for (i = 0; i < (temp + 1); i++)
+ f300_get_byte(dev);/* get data to empty buffer */
+
+ f300_set_line(dev, F300_RESET, 1);/* received data over */
+ f300_set_line(dev, F300_DATA, 1);
+ }
+
+ return ret;
+}
+
+int f300_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
+{
+ u8 buf[16];
+
+ buf[0] = 0x05;
+ buf[1] = 0x38;/* write port */
+ buf[2] = 0x01;/* A port, lnb power */
+
+ switch (voltage) {
+ case SEC_VOLTAGE_13:
+ buf[3] = 0x01;/* power on */
+ buf[4] = 0x02;/* B port, H/V */
+ buf[5] = 0x00;/*13V v*/
+ break;
+ case SEC_VOLTAGE_18:
+ buf[3] = 0x01;
+ buf[4] = 0x02;
+ buf[5] = 0x01;/* 18V h*/
+ break;
+ case SEC_VOLTAGE_OFF:
+ buf[3] = 0x00;/* power off */
+ buf[4] = 0x00;
+ buf[5] = 0x00;
+ break;
+ }
+
+ return f300_xfer(fe, buf);
+}
diff --git a/drivers/media/video/cx23885/cx23885-f300.h b/drivers/media/video/cx23885/cx23885-f300.h
new file mode 100644
index 0000000..e73344c
--- /dev/null
+++ b/drivers/media/video/cx23885/cx23885-f300.h
@@ -0,0 +1,2 @@
+extern int f300_set_voltage(struct dvb_frontend *fe,
+ fe_sec_voltage_t voltage);
diff --git a/drivers/media/video/cx23885/cx23885-input.c b/drivers/media/video/cx23885/cx23885-input.c
new file mode 100644
index 0000000..469e083
--- /dev/null
+++ b/drivers/media/video/cx23885/cx23885-input.c
@@ -0,0 +1,427 @@
+/*
+ * Driver for the Conexant CX23885/7/8 PCIe bridge
+ *
+ * Infrared remote control input device
+ *
+ * Most of this file is
+ *
+ * Copyright (C) 2009 Andy Walls <awalls@radix.net>
+ *
+ * However, the cx23885_input_{init,fini} functions contained herein are
+ * derived from Linux kernel files linux/media/video/.../...-input.c marked as:
+ *
+ * Copyright (C) 2008 <srinivasa.deevi at conexant dot com>
+ * Copyright (C) 2005 Ludovico Cavedon <cavedon@sssup.it>
+ * Markus Rechberger <mrechberger@gmail.com>
+ * Mauro Carvalho Chehab <mchehab@infradead.org>
+ * Sascha Sommer <saschasommer@freenet.de>
+ * Copyright (C) 2004, 2005 Chris Pascoe
+ * Copyright (C) 2003, 2004 Gerd Knorr
+ * Copyright (C) 2003 Pavel Machek
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/input.h>
+#include <media/ir-common.h>
+#include <media/v4l2-subdev.h>
+
+#include "cx23885.h"
+
+#define RC5_BITS 14
+#define RC5_HALF_BITS (2*RC5_BITS)
+#define RC5_HALF_BITS_MASK ((1 << RC5_HALF_BITS) - 1)
+
+#define RC5_START_BITS_NORMAL 0x3 /* Command range 0 - 63 */
+#define RC5_START_BITS_EXTENDED 0x2 /* Command range 64 - 127 */
+
+#define RC5_EXTENDED_COMMAND_OFFSET 64
+
+static inline unsigned int rc5_command(u32 rc5_baseband)
+{
+ return RC5_INSTR(rc5_baseband) +
+ ((RC5_START(rc5_baseband) == RC5_START_BITS_EXTENDED)
+ ? RC5_EXTENDED_COMMAND_OFFSET : 0);
+}
+
+static void cx23885_input_process_raw_rc5(struct cx23885_dev *dev)
+{
+ struct card_ir *ir_input = dev->ir_input;
+ unsigned int code, command;
+ u32 rc5;
+
+ /* Ignore codes that are too short to be valid RC-5 */
+ if (ir_input->last_bit < (RC5_HALF_BITS - 1))
+ return;
+
+ /* The library has the manchester coding backwards; XOR to adapt. */
+ code = (ir_input->code & RC5_HALF_BITS_MASK) ^ RC5_HALF_BITS_MASK;
+ rc5 = ir_rc5_decode(code);
+
+ switch (RC5_START(rc5)) {
+ case RC5_START_BITS_NORMAL:
+ break;
+ case RC5_START_BITS_EXTENDED:
+ /* Don't allow if the remote only emits standard commands */
+ if (ir_input->start == RC5_START_BITS_NORMAL)
+ return;
+ break;
+ default:
+ return;
+ }
+
+ if (ir_input->addr != RC5_ADDR(rc5))
+ return;
+
+ /* Don't generate a keypress for RC-5 auto-repeated keypresses */
+ command = rc5_command(rc5);
+ if (RC5_TOGGLE(rc5) != RC5_TOGGLE(ir_input->last_rc5) ||
+ command != rc5_command(ir_input->last_rc5) ||
+ /* Catch T == 0, CMD == 0 (e.g. '0') as first keypress after init */
+ RC5_START(ir_input->last_rc5) == 0) {
+ /* This keypress is differnet: not an auto repeat */
+ ir_input_nokey(ir_input->dev, &ir_input->ir);
+ ir_input_keydown(ir_input->dev, &ir_input->ir, command);
+ }
+ ir_input->last_rc5 = rc5;
+
+ /* Schedule when we should do the key up event: ir_input_nokey() */
+ mod_timer(&ir_input->timer_keyup,
+ jiffies + msecs_to_jiffies(ir_input->rc5_key_timeout));
+}
+
+static void cx23885_input_next_pulse_width_rc5(struct cx23885_dev *dev,
+ u32 ns_pulse)
+{
+ const int rc5_quarterbit_ns = 444444; /* 32 cycles/36 kHz/2 = 444 us */
+ struct card_ir *ir_input = dev->ir_input;
+ int i, level, quarterbits, halfbits;
+
+ if (!ir_input->active) {
+ ir_input->active = 1;
+ /* assume an initial space that we may not detect or measure */
+ ir_input->code = 0;
+ ir_input->last_bit = 0;
+ }
+
+ if (ns_pulse == V4L2_SUBDEV_IR_PULSE_RX_SEQ_END) {
+ ir_input->last_bit++; /* Account for the final space */
+ ir_input->active = 0;
+ cx23885_input_process_raw_rc5(dev);
+ return;
+ }
+
+ level = (ns_pulse & V4L2_SUBDEV_IR_PULSE_LEVEL_MASK) ? 1 : 0;
+
+ /* Skip any leading space to sync to the start bit */
+ if (ir_input->last_bit == 0 && level == 0)
+ return;
+
+ /*
+ * With valid RC-5 we can get up to two consecutive half-bits in a
+ * single pulse measurment. Experiments have shown that the duration
+ * of a half-bit can vary. Make sure we always end up with an even
+ * number of quarter bits at the same level (mark or space).
+ */
+ ns_pulse &= V4L2_SUBDEV_IR_PULSE_MAX_WIDTH_NS;
+ quarterbits = ns_pulse / rc5_quarterbit_ns;
+ if (quarterbits & 1)
+ quarterbits++;
+ halfbits = quarterbits / 2;
+
+ for (i = 0; i < halfbits; i++) {
+ ir_input->last_bit++;
+ ir_input->code |= (level << ir_input->last_bit);
+
+ if (ir_input->last_bit >= RC5_HALF_BITS-1) {
+ ir_input->active = 0;
+ cx23885_input_process_raw_rc5(dev);
+ /*
+ * If level is 1, a leading mark is invalid for RC5.
+ * If level is 0, we scan past extra intial space.
+ * Either way we don't want to reactivate collecting
+ * marks or spaces here with any left over half-bits.
+ */
+ break;
+ }
+ }
+}
+
+static void cx23885_input_process_pulse_widths_rc5(struct cx23885_dev *dev,
+ bool add_eom)
+{
+ struct card_ir *ir_input = dev->ir_input;
+ struct ir_input_state *ir_input_state = &ir_input->ir;
+
+ u32 ns_pulse[RC5_HALF_BITS+1];
+ ssize_t num = 0;
+ int count, i;
+
+ do {
+ v4l2_subdev_call(dev->sd_ir, ir, rx_read, (u8 *) ns_pulse,
+ sizeof(ns_pulse), &num);
+
+ count = num / sizeof(u32);
+
+ /* Append an end of Rx seq, if the caller requested */
+ if (add_eom && count < ARRAY_SIZE(ns_pulse)) {
+ ns_pulse[count] = V4L2_SUBDEV_IR_PULSE_RX_SEQ_END;
+ count++;
+ }
+
+ /* Just drain the Rx FIFO, if we're called, but not RC-5 */
+ if (ir_input_state->ir_type != IR_TYPE_RC5)
+ continue;
+
+ for (i = 0; i < count; i++)
+ cx23885_input_next_pulse_width_rc5(dev, ns_pulse[i]);
+ } while (num != 0);
+}
+
+void cx23885_input_rx_work_handler(struct cx23885_dev *dev, u32 events)
+{
+ struct v4l2_subdev_ir_parameters params;
+ int overrun, data_available;
+
+ if (dev->sd_ir == NULL || events == 0)
+ return;
+
+ switch (dev->board) {
+ case CX23885_BOARD_HAUPPAUGE_HVR1850:
+ case CX23885_BOARD_HAUPPAUGE_HVR1290:
+ /*
+ * The only board we handle right now. However other boards
+ * using the CX2388x integrated IR controller should be similar
+ */
+ break;
+ default:
+ return;
+ }
+
+ overrun = events & (V4L2_SUBDEV_IR_RX_SW_FIFO_OVERRUN |
+ V4L2_SUBDEV_IR_RX_HW_FIFO_OVERRUN);
+
+ data_available = events & (V4L2_SUBDEV_IR_RX_END_OF_RX_DETECTED |
+ V4L2_SUBDEV_IR_RX_FIFO_SERVICE_REQ);
+
+ if (overrun) {
+ /* If there was a FIFO overrun, stop the device */
+ v4l2_subdev_call(dev->sd_ir, ir, rx_g_parameters, ¶ms);
+ params.enable = false;
+ /* Mitigate race with cx23885_input_ir_stop() */
+ params.shutdown = atomic_read(&dev->ir_input_stopping);
+ v4l2_subdev_call(dev->sd_ir, ir, rx_s_parameters, ¶ms);
+ }
+
+ if (data_available)
+ cx23885_input_process_pulse_widths_rc5(dev, overrun);
+
+ if (overrun) {
+ /* If there was a FIFO overrun, clear & restart the device */
+ params.enable = true;
+ /* Mitigate race with cx23885_input_ir_stop() */
+ params.shutdown = atomic_read(&dev->ir_input_stopping);
+ v4l2_subdev_call(dev->sd_ir, ir, rx_s_parameters, ¶ms);
+ }
+}
+
+static void cx23885_input_ir_start(struct cx23885_dev *dev)
+{
+ struct card_ir *ir_input = dev->ir_input;
+ struct ir_input_state *ir_input_state = &ir_input->ir;
+ struct v4l2_subdev_ir_parameters params;
+
+ if (dev->sd_ir == NULL)
+ return;
+
+ atomic_set(&dev->ir_input_stopping, 0);
+
+ /* keyup timer set up, if needed */
+ switch (dev->board) {
+ case CX23885_BOARD_HAUPPAUGE_HVR1850:
+ case CX23885_BOARD_HAUPPAUGE_HVR1290:
+ setup_timer(&ir_input->timer_keyup,
+ ir_rc5_timer_keyup, /* Not actually RC-5 specific */
+ (unsigned long) ir_input);
+ if (ir_input_state->ir_type == IR_TYPE_RC5) {
+ /*
+ * RC-5 repeats a held key every
+ * 64 bits * (2 * 32/36000) sec/bit = 113.778 ms
+ */
+ ir_input->rc5_key_timeout = 115;
+ }
+ break;
+ }
+
+ v4l2_subdev_call(dev->sd_ir, ir, rx_g_parameters, ¶ms);
+ switch (dev->board) {
+ case CX23885_BOARD_HAUPPAUGE_HVR1850:
+ case CX23885_BOARD_HAUPPAUGE_HVR1290:
+ /*
+ * The IR controller on this board only returns pulse widths.
+ * Any other mode setting will fail to set up the device.
+ */
+ params.mode = V4L2_SUBDEV_IR_MODE_PULSE_WIDTH;
+ params.enable = true;
+ params.interrupt_enable = true;
+ params.shutdown = false;
+
+ /* Setup for baseband compatible with both RC-5 and RC-6A */
+ params.modulation = false;
+ /* RC-5: 2,222,222 ns = 1/36 kHz * 32 cycles * 2 marks * 1.25*/
+ /* RC-6A: 3,333,333 ns = 1/36 kHz * 16 cycles * 6 marks * 1.25*/
+ params.max_pulse_width = 3333333; /* ns */
+ /* RC-5: 666,667 ns = 1/36 kHz * 32 cycles * 1 mark * 0.75 */
+ /* RC-6A: 333,333 ns = 1/36 kHz * 16 cycles * 1 mark * 0.75 */
+ params.noise_filter_min_width = 333333; /* ns */
+ /*
+ * This board has inverted receive sense:
+ * mark is received as low logic level;
+ * falling edges are detected as rising edges; etc.
+ */
+ params.invert = true;
+ break;
+ }
+ v4l2_subdev_call(dev->sd_ir, ir, rx_s_parameters, ¶ms);
+}
+
+static void cx23885_input_ir_stop(struct cx23885_dev *dev)
+{
+ struct card_ir *ir_input = dev->ir_input;
+ struct v4l2_subdev_ir_parameters params;
+
+ if (dev->sd_ir == NULL)
+ return;
+
+ /*
+ * Stop the sd_ir subdevice from generating notifications and
+ * scheduling work.
+ * It is shutdown this way in order to mitigate a race with
+ * cx23885_input_rx_work_handler() in the overrun case, which could
+ * re-enable the subdevice.
+ */
+ atomic_set(&dev->ir_input_stopping, 1);
+ v4l2_subdev_call(dev->sd_ir, ir, rx_g_parameters, ¶ms);
+ while (params.shutdown == false) {
+ params.enable = false;
+ params.interrupt_enable = false;
+ params.shutdown = true;
+ v4l2_subdev_call(dev->sd_ir, ir, rx_s_parameters, ¶ms);
+ v4l2_subdev_call(dev->sd_ir, ir, rx_g_parameters, ¶ms);
+ }
+
+ flush_scheduled_work();
+
+ switch (dev->board) {
+ case CX23885_BOARD_HAUPPAUGE_HVR1850:
+ case CX23885_BOARD_HAUPPAUGE_HVR1290:
+ del_timer_sync(&ir_input->timer_keyup);
+ break;
+ }
+}
+
+int cx23885_input_init(struct cx23885_dev *dev)
+{
+ struct card_ir *ir;
+ struct input_dev *input_dev;
+ struct ir_scancode_table *ir_codes = NULL;
+ int ir_type, ir_addr, ir_start;
+ int ret;
+
+ /*
+ * If the IR device (hardware registers, chip, GPIO lines, etc.) isn't
+ * encapsulated in a v4l2_subdev, then I'm not going to deal with it.
+ */
+ if (dev->sd_ir == NULL)
+ return -ENODEV;
+
+ switch (dev->board) {
+ case CX23885_BOARD_HAUPPAUGE_HVR1850:
+ case CX23885_BOARD_HAUPPAUGE_HVR1290:
+ /* Parameters for the grey Hauppauge remote for the HVR-1850 */
+ ir_codes = &ir_codes_hauppauge_new_table;
+ ir_type = IR_TYPE_RC5;
+ ir_addr = 0x1e; /* RC-5 system bits emitted by the remote */
+ ir_start = RC5_START_BITS_NORMAL; /* A basic RC-5 remote */
+ break;
+ }
+ if (ir_codes == NULL)
+ return -ENODEV;
+
+ ir = kzalloc(sizeof(*ir), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!ir || !input_dev) {
+ ret = -ENOMEM;
+ goto err_out_free;
+ }
+
+ ir->dev = input_dev;
+ ir->addr = ir_addr;
+ ir->start = ir_start;
+
+ /* init input device */
+ snprintf(ir->name, sizeof(ir->name), "cx23885 IR (%s)",
+ cx23885_boards[dev->board].name);
+ snprintf(ir->phys, sizeof(ir->phys), "pci-%s/ir0", pci_name(dev->pci));
+
+ ret = ir_input_init(input_dev, &ir->ir, ir_type, ir_codes);
+ if (ret < 0)
+ goto err_out_free;
+
+ input_dev->name = ir->name;
+ input_dev->phys = ir->phys;
+ input_dev->id.bustype = BUS_PCI;
+ input_dev->id.version = 1;
+ if (dev->pci->subsystem_vendor) {
+ input_dev->id.vendor = dev->pci->subsystem_vendor;
+ input_dev->id.product = dev->pci->subsystem_device;
+ } else {
+ input_dev->id.vendor = dev->pci->vendor;
+ input_dev->id.product = dev->pci->device;
+ }
+ input_dev->dev.parent = &dev->pci->dev;
+
+ dev->ir_input = ir;
+ cx23885_input_ir_start(dev);
+
+ ret = input_register_device(ir->dev);
+ if (ret)
+ goto err_out_stop;
+
+ return 0;
+
+err_out_stop:
+ cx23885_input_ir_stop(dev);
+ dev->ir_input = NULL;
+err_out_free:
+ ir_input_free(input_dev);
+ input_free_device(input_dev);
+ kfree(ir);
+ return ret;
+}
+
+void cx23885_input_fini(struct cx23885_dev *dev)
+{
+ /* Always stop the IR hardware from generating interrupts */
+ cx23885_input_ir_stop(dev);
+
+ if (dev->ir_input == NULL)
+ return;
+ ir_input_free(dev->ir_input->dev);
+ input_unregister_device(dev->ir_input->dev);
+ kfree(dev->ir_input);
+ dev->ir_input = NULL;
+}
diff --git a/drivers/media/video/cx23885/cx23885-input.h b/drivers/media/video/cx23885/cx23885-input.h
new file mode 100644
index 0000000..3572cb1
--- /dev/null
+++ b/drivers/media/video/cx23885/cx23885-input.h
@@ -0,0 +1,30 @@
+/*
+ * Driver for the Conexant CX23885/7/8 PCIe bridge
+ *
+ * Infrared remote control input device
+ *
+ * Copyright (C) 2009 Andy Walls <awalls@radix.net>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#ifndef _CX23885_INPUT_H_
+#define _CX23885_INPUT_H_
+int cx23885_input_rx_work_handler(struct cx23885_dev *dev, u32 events);
+
+int cx23885_input_init(struct cx23885_dev *dev);
+void cx23885_input_fini(struct cx23885_dev *dev);
+#endif
diff --git a/drivers/media/video/cx23885/cx23885-ioctl.c b/drivers/media/video/cx23885/cx23885-ioctl.c
new file mode 100644
index 0000000..dfb4627
--- /dev/null
+++ b/drivers/media/video/cx23885/cx23885-ioctl.c
@@ -0,0 +1,208 @@
+/*
+ * Driver for the Conexant CX23885/7/8 PCIe bridge
+ *
+ * Various common ioctl() support functions
+ *
+ * Copyright (c) 2009 Andy Walls <awalls@radix.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include "cx23885.h"
+#include <media/v4l2-chip-ident.h>
+
+int cx23885_g_chip_ident(struct file *file, void *fh,
+ struct v4l2_dbg_chip_ident *chip)
+{
+ struct cx23885_dev *dev = ((struct cx23885_fh *)fh)->dev;
+ int err = 0;
+ u8 rev;
+
+ chip->ident = V4L2_IDENT_NONE;
+ chip->revision = 0;
+ switch (chip->match.type) {
+ case V4L2_CHIP_MATCH_HOST:
+ switch (chip->match.addr) {
+ case 0:
+ rev = cx_read(RDR_CFG2) & 0xff;
+ switch (dev->pci->device) {
+ case 0x8852:
+ /* rev 0x04 could be '885 or '888. Pick '888. */
+ if (rev == 0x04)
+ chip->ident = V4L2_IDENT_CX23888;
+ else
+ chip->ident = V4L2_IDENT_CX23885;
+ break;
+ case 0x8880:
+ if (rev == 0x0e || rev == 0x0f)
+ chip->ident = V4L2_IDENT_CX23887;
+ else
+ chip->ident = V4L2_IDENT_CX23888;
+ break;
+ default:
+ chip->ident = V4L2_IDENT_UNKNOWN;
+ break;
+ }
+ chip->revision = (dev->pci->device << 16) | (rev << 8) |
+ (dev->hwrevision & 0xff);
+ break;
+ case 1:
+ if (dev->v4l_device != NULL) {
+ chip->ident = V4L2_IDENT_CX23417;
+ chip->revision = 0;
+ }
+ break;
+ case 2:
+ /*
+ * The integrated IR controller on the CX23888 is
+ * host chip 2. It may not be used/initialized or sd_ir
+ * may be pointing at the cx25840 subdevice for the
+ * IR controller on the CX23885. Thus we find it
+ * without using the dev->sd_ir pointer.
+ */
+ call_hw(dev, CX23885_HW_888_IR, core, g_chip_ident,
+ chip);
+ break;
+ default:
+ err = -EINVAL; /* per V4L2 spec */
+ break;
+ }
+ break;
+ case V4L2_CHIP_MATCH_I2C_DRIVER:
+ /* If needed, returns V4L2_IDENT_AMBIGUOUS without extra work */
+ call_all(dev, core, g_chip_ident, chip);
+ break;
+ case V4L2_CHIP_MATCH_I2C_ADDR:
+ /*
+ * We could return V4L2_IDENT_UNKNOWN, but we don't do the work
+ * to look if a chip is at the address with no driver. That's a
+ * dangerous thing to do with EEPROMs anyway.
+ */
+ call_all(dev, core, g_chip_ident, chip);
+ break;
+ default:
+ err = -EINVAL;
+ break;
+ }
+ return err;
+}
+
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+static int cx23885_g_host_register(struct cx23885_dev *dev,
+ struct v4l2_dbg_register *reg)
+{
+ if ((reg->reg & 0x3) != 0 || reg->reg >= pci_resource_len(dev->pci, 0))
+ return -EINVAL;
+
+ reg->size = 4;
+ reg->val = cx_read(reg->reg);
+ return 0;
+}
+
+static int cx23417_g_register(struct cx23885_dev *dev,
+ struct v4l2_dbg_register *reg)
+{
+ u32 value;
+
+ if (dev->v4l_device == NULL)
+ return -EINVAL;
+
+ if ((reg->reg & 0x3) != 0 || reg->reg >= 0x10000)
+ return -EINVAL;
+
+ if (mc417_register_read(dev, (u16) reg->reg, &value))
+ return -EINVAL; /* V4L2 spec, but -EREMOTEIO really */
+
+ reg->size = 4;
+ reg->val = value;
+ return 0;
+}
+
+int cx23885_g_register(struct file *file, void *fh,
+ struct v4l2_dbg_register *reg)
+{
+ struct cx23885_dev *dev = ((struct cx23885_fh *)fh)->dev;
+
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+
+ if (reg->match.type == V4L2_CHIP_MATCH_HOST) {
+ switch (reg->match.addr) {
+ case 0:
+ return cx23885_g_host_register(dev, reg);
+ case 1:
+ return cx23417_g_register(dev, reg);
+ default:
+ break;
+ }
+ }
+
+ /* FIXME - any error returns should not be ignored */
+ call_all(dev, core, g_register, reg);
+ return 0;
+}
+
+static int cx23885_s_host_register(struct cx23885_dev *dev,
+ struct v4l2_dbg_register *reg)
+{
+ if ((reg->reg & 0x3) != 0 || reg->reg >= pci_resource_len(dev->pci, 0))
+ return -EINVAL;
+
+ reg->size = 4;
+ cx_write(reg->reg, reg->val);
+ return 0;
+}
+
+static int cx23417_s_register(struct cx23885_dev *dev,
+ struct v4l2_dbg_register *reg)
+{
+ if (dev->v4l_device == NULL)
+ return -EINVAL;
+
+ if ((reg->reg & 0x3) != 0 || reg->reg >= 0x10000)
+ return -EINVAL;
+
+ if (mc417_register_write(dev, (u16) reg->reg, (u32) reg->val))
+ return -EINVAL; /* V4L2 spec, but -EREMOTEIO really */
+
+ reg->size = 4;
+ return 0;
+}
+
+int cx23885_s_register(struct file *file, void *fh,
+ struct v4l2_dbg_register *reg)
+{
+ struct cx23885_dev *dev = ((struct cx23885_fh *)fh)->dev;
+
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+
+ if (reg->match.type == V4L2_CHIP_MATCH_HOST) {
+ switch (reg->match.addr) {
+ case 0:
+ return cx23885_s_host_register(dev, reg);
+ case 1:
+ return cx23417_s_register(dev, reg);
+ default:
+ break;
+ }
+ }
+
+ /* FIXME - any error returns should not be ignored */
+ call_all(dev, core, s_register, reg);
+ return 0;
+}
+#endif
diff --git a/drivers/media/video/cx23885/cx23885-ioctl.h b/drivers/media/video/cx23885/cx23885-ioctl.h
new file mode 100644
index 0000000..80b0f49
--- /dev/null
+++ b/drivers/media/video/cx23885/cx23885-ioctl.h
@@ -0,0 +1,39 @@
+/*
+ * Driver for the Conexant CX23885/7/8 PCIe bridge
+ *
+ * Various common ioctl() support functions
+ *
+ * Copyright (c) 2009 Andy Walls <awalls@radix.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _CX23885_IOCTL_H_
+#define _CX23885_IOCTL_H_
+
+int cx23885_g_chip_ident(struct file *file, void *fh,
+ struct v4l2_dbg_chip_ident *chip);
+
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+int cx23885_g_register(struct file *file, void *fh,
+ struct v4l2_dbg_register *reg);
+
+
+int cx23885_s_register(struct file *file, void *fh,
+ struct v4l2_dbg_register *reg);
+
+#endif
+#endif
diff --git a/drivers/media/video/cx23885/cx23885-ir.c b/drivers/media/video/cx23885/cx23885-ir.c
new file mode 100644
index 0000000..6ae982c
--- /dev/null
+++ b/drivers/media/video/cx23885/cx23885-ir.c
@@ -0,0 +1,101 @@
+/*
+ * Driver for the Conexant CX23885/7/8 PCIe bridge
+ *
+ * Infrared device support routines - non-input, non-vl42_subdev routines
+ *
+ * Copyright (C) 2009 Andy Walls <awalls@radix.net>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <media/v4l2-device.h>
+
+#include "cx23885.h"
+#include "cx23885-input.h"
+
+#define CX23885_IR_RX_FIFO_SERVICE_REQ 0
+#define CX23885_IR_RX_END_OF_RX_DETECTED 1
+#define CX23885_IR_RX_HW_FIFO_OVERRUN 2
+#define CX23885_IR_RX_SW_FIFO_OVERRUN 3
+
+#define CX23885_IR_TX_FIFO_SERVICE_REQ 0
+
+
+void cx23885_ir_rx_work_handler(struct work_struct *work)
+{
+ struct cx23885_dev *dev =
+ container_of(work, struct cx23885_dev, ir_rx_work);
+ u32 events = 0;
+ unsigned long *notifications = &dev->ir_rx_notifications;
+
+ if (test_and_clear_bit(CX23885_IR_RX_SW_FIFO_OVERRUN, notifications))
+ events |= V4L2_SUBDEV_IR_RX_SW_FIFO_OVERRUN;
+ if (test_and_clear_bit(CX23885_IR_RX_HW_FIFO_OVERRUN, notifications))
+ events |= V4L2_SUBDEV_IR_RX_HW_FIFO_OVERRUN;
+ if (test_and_clear_bit(CX23885_IR_RX_END_OF_RX_DETECTED, notifications))
+ events |= V4L2_SUBDEV_IR_RX_END_OF_RX_DETECTED;
+ if (test_and_clear_bit(CX23885_IR_RX_FIFO_SERVICE_REQ, notifications))
+ events |= V4L2_SUBDEV_IR_RX_FIFO_SERVICE_REQ;
+
+ if (events == 0)
+ return;
+
+ if (dev->ir_input)
+ cx23885_input_rx_work_handler(dev, events);
+}
+
+void cx23885_ir_tx_work_handler(struct work_struct *work)
+{
+ struct cx23885_dev *dev =
+ container_of(work, struct cx23885_dev, ir_tx_work);
+ u32 events = 0;
+ unsigned long *notifications = &dev->ir_tx_notifications;
+
+ if (test_and_clear_bit(CX23885_IR_TX_FIFO_SERVICE_REQ, notifications))
+ events |= V4L2_SUBDEV_IR_TX_FIFO_SERVICE_REQ;
+
+ if (events == 0)
+ return;
+
+}
+
+/* Called in an IRQ context */
+void cx23885_ir_rx_v4l2_dev_notify(struct v4l2_subdev *sd, u32 events)
+{
+ struct cx23885_dev *dev = to_cx23885(sd->v4l2_dev);
+ unsigned long *notifications = &dev->ir_rx_notifications;
+
+ if (events & V4L2_SUBDEV_IR_RX_FIFO_SERVICE_REQ)
+ set_bit(CX23885_IR_RX_FIFO_SERVICE_REQ, notifications);
+ if (events & V4L2_SUBDEV_IR_RX_END_OF_RX_DETECTED)
+ set_bit(CX23885_IR_RX_END_OF_RX_DETECTED, notifications);
+ if (events & V4L2_SUBDEV_IR_RX_HW_FIFO_OVERRUN)
+ set_bit(CX23885_IR_RX_HW_FIFO_OVERRUN, notifications);
+ if (events & V4L2_SUBDEV_IR_RX_SW_FIFO_OVERRUN)
+ set_bit(CX23885_IR_RX_SW_FIFO_OVERRUN, notifications);
+ schedule_work(&dev->ir_rx_work);
+}
+
+/* Called in an IRQ context */
+void cx23885_ir_tx_v4l2_dev_notify(struct v4l2_subdev *sd, u32 events)
+{
+ struct cx23885_dev *dev = to_cx23885(sd->v4l2_dev);
+ unsigned long *notifications = &dev->ir_tx_notifications;
+
+ if (events & V4L2_SUBDEV_IR_TX_FIFO_SERVICE_REQ)
+ set_bit(CX23885_IR_TX_FIFO_SERVICE_REQ, notifications);
+ schedule_work(&dev->ir_tx_work);
+}
diff --git a/drivers/media/video/cx23885/cx23885-ir.h b/drivers/media/video/cx23885/cx23885-ir.h
new file mode 100644
index 0000000..9b8a6d5
--- /dev/null
+++ b/drivers/media/video/cx23885/cx23885-ir.h
@@ -0,0 +1,31 @@
+/*
+ * Driver for the Conexant CX23885/7/8 PCIe bridge
+ *
+ * Infrared device support routines - non-input, non-vl42_subdev routines
+ *
+ * Copyright (C) 2009 Andy Walls <awalls@radix.net>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#ifndef _CX23885_IR_H_
+#define _CX23885_IR_H_
+void cx23885_ir_rx_v4l2_dev_notify(struct v4l2_subdev *sd, u32 events);
+void cx23885_ir_tx_v4l2_dev_notify(struct v4l2_subdev *sd, u32 events);
+
+void cx23885_ir_rx_work_handler(struct work_struct *work);
+void cx23885_ir_tx_work_handler(struct work_struct *work);
+#endif
diff --git a/drivers/media/video/cx23885/cx23885-reg.h b/drivers/media/video/cx23885/cx23885-reg.h
index eafbe52..c0bc9a0 100644
--- a/drivers/media/video/cx23885/cx23885-reg.h
+++ b/drivers/media/video/cx23885/cx23885-reg.h
@@ -212,8 +212,9 @@
#define DEV_CNTRL2 0x00040000
-#define PCI_MSK_GPIO1 (1 << 24)
-#define PCI_MSK_GPIO0 (1 << 23)
+#define PCI_MSK_IR (1 << 28)
+#define PCI_MSK_GPIO1 (1 << 24)
+#define PCI_MSK_GPIO0 (1 << 23)
#define PCI_MSK_APB_DMA (1 << 12)
#define PCI_MSK_AL_WR (1 << 11)
#define PCI_MSK_AL_RD (1 << 10)
diff --git a/drivers/media/video/cx23885/cx23885-video.c b/drivers/media/video/cx23885/cx23885-video.c
index 654cc25..8b372b4 100644
--- a/drivers/media/video/cx23885/cx23885-video.c
+++ b/drivers/media/video/cx23885/cx23885-video.c
@@ -35,6 +35,7 @@
#include "cx23885.h"
#include <media/v4l2-common.h>
#include <media/v4l2-ioctl.h>
+#include "cx23885-ioctl.h"
MODULE_DESCRIPTION("v4l2 driver module for cx23885 based TV cards");
MODULE_AUTHOR("Steven Toth <stoth@linuxtv.org>");
@@ -401,6 +402,13 @@
INPUT(input)->gpio2, INPUT(input)->gpio3);
dev->input = input;
+ if (dev->board == CX23885_BOARD_MYGICA_X8506 ||
+ dev->board == CX23885_BOARD_MAGICPRO_PROHDTVE2) {
+ /* Select Analog TV */
+ if (INPUT(input)->type == CX23885_VMUX_TELEVISION)
+ cx23885_gpio_clear(dev, GPIO_0);
+ }
+
/* Tell the internal A/V decoder */
v4l2_subdev_call(dev->sd_cx25840, video, s_routing,
INPUT(input)->vmux, 0, 0);
@@ -1144,6 +1152,7 @@
[CX23885_VMUX_COMPOSITE3] = "Composite3",
[CX23885_VMUX_COMPOSITE4] = "Composite4",
[CX23885_VMUX_SVIDEO] = "S-Video",
+ [CX23885_VMUX_COMPONENT] = "Component",
[CX23885_VMUX_TELEVISION] = "Television",
[CX23885_VMUX_CABLE] = "Cable TV",
[CX23885_VMUX_DVB] = "DVB",
@@ -1312,34 +1321,6 @@
cx23885_set_freq(dev, f);
}
-#ifdef CONFIG_VIDEO_ADV_DEBUG
-static int vidioc_g_register(struct file *file, void *fh,
- struct v4l2_dbg_register *reg)
-{
- struct cx23885_dev *dev = ((struct cx23885_fh *)fh)->dev;
-
- if (!v4l2_chip_match_host(®->match))
- return -EINVAL;
-
- call_all(dev, core, g_register, reg);
-
- return 0;
-}
-
-static int vidioc_s_register(struct file *file, void *fh,
- struct v4l2_dbg_register *reg)
-{
- struct cx23885_dev *dev = ((struct cx23885_fh *)fh)->dev;
-
- if (!v4l2_chip_match_host(®->match))
- return -EINVAL;
-
- call_all(dev, core, s_register, reg);
-
- return 0;
-}
-#endif
-
/* ----------------------------------------------------------- */
static void cx23885_vid_timeout(unsigned long data)
@@ -1449,9 +1430,10 @@
.vidioc_s_tuner = vidioc_s_tuner,
.vidioc_g_frequency = vidioc_g_frequency,
.vidioc_s_frequency = vidioc_s_frequency,
+ .vidioc_g_chip_ident = cx23885_g_chip_ident,
#ifdef CONFIG_VIDEO_ADV_DEBUG
- .vidioc_g_register = vidioc_g_register,
- .vidioc_s_register = vidioc_s_register,
+ .vidioc_g_register = cx23885_g_register,
+ .vidioc_s_register = cx23885_s_register,
#endif
};
@@ -1529,9 +1511,11 @@
if (sd) {
struct tuner_setup tun_setup;
+ memset(&tun_setup, 0, sizeof(tun_setup));
tun_setup.mode_mask = T_ANALOG_TV;
tun_setup.type = dev->tuner_type;
tun_setup.addr = v4l2_i2c_subdev_addr(sd);
+ tun_setup.tuner_callback = cx23885_tuner_callback;
v4l2_subdev_call(sd, tuner, s_type_addr, &tun_setup);
}
diff --git a/drivers/media/video/cx23885/cx23885.h b/drivers/media/video/cx23885/cx23885.h
index cc7a165..fa74476 100644
--- a/drivers/media/video/cx23885/cx23885.h
+++ b/drivers/media/video/cx23885/cx23885.h
@@ -79,6 +79,8 @@
#define CX23885_BOARD_MAGICPRO_PROHDTVE2 23
#define CX23885_BOARD_HAUPPAUGE_HVR1850 24
#define CX23885_BOARD_COMPRO_VIDEOMATE_E800 25
+#define CX23885_BOARD_HAUPPAUGE_HVR1290 26
+#define CX23885_BOARD_MYGICA_X8558PRO 27
#define GPIO_0 0x00000001
#define GPIO_1 0x00000002
@@ -157,6 +159,7 @@
CX23885_VMUX_COMPOSITE3,
CX23885_VMUX_COMPOSITE4,
CX23885_VMUX_SVIDEO,
+ CX23885_VMUX_COMPONENT,
CX23885_VMUX_TELEVISION,
CX23885_VMUX_CABLE,
CX23885_VMUX_DVB,
@@ -297,10 +300,6 @@
/* Allow a single tsport to have multiple frontends */
u32 num_frontends;
void *port_priv;
-
- /* FIXME: temporary hack */
- int (*set_frontend_save) (struct dvb_frontend *,
- struct dvb_frontend_parameters *);
};
struct cx23885_dev {
@@ -356,6 +355,16 @@
unsigned int has_radio;
struct v4l2_subdev *sd_cx25840;
+ /* Infrared */
+ struct v4l2_subdev *sd_ir;
+ struct work_struct ir_rx_work;
+ unsigned long ir_rx_notifications;
+ struct work_struct ir_tx_work;
+ unsigned long ir_tx_notifications;
+
+ struct card_ir *ir_input;
+ atomic_t ir_input_stopping;
+
/* V4l */
u32 freq;
struct video_device *video_dev;
@@ -383,6 +392,13 @@
#define call_all(dev, o, f, args...) \
v4l2_device_call_all(&dev->v4l2_dev, 0, o, f, ##args)
+#define CX23885_HW_888_IR (1 << 0)
+
+#define call_hw(dev, grpid, o, f, args...) \
+ v4l2_device_call_all(&dev->v4l2_dev, grpid, o, f, ##args)
+
+extern struct v4l2_subdev *cx23885_find_hw(struct cx23885_dev *dev, u32 hw);
+
extern struct list_head cx23885_devlist;
#define SRAM_CH01 0 /* Video A */
@@ -455,6 +471,7 @@
extern void cx23885_gpio_set(struct cx23885_dev *dev, u32 mask);
extern void cx23885_gpio_clear(struct cx23885_dev *dev, u32 mask);
+extern u32 cx23885_gpio_get(struct cx23885_dev *dev, u32 mask);
extern void cx23885_gpio_enable(struct cx23885_dev *dev, u32 mask,
int asoutput);
@@ -471,6 +488,8 @@
int command, int arg);
extern void cx23885_card_list(struct cx23885_dev *dev);
extern int cx23885_ir_init(struct cx23885_dev *dev);
+extern void cx23885_ir_pci_int_enable(struct cx23885_dev *dev);
+extern void cx23885_ir_fini(struct cx23885_dev *dev);
extern void cx23885_gpio_setup(struct cx23885_dev *dev);
extern void cx23885_card_setup(struct cx23885_dev *dev);
extern void cx23885_card_setup_pre_i2c(struct cx23885_dev *dev);
@@ -515,6 +534,10 @@
extern void cx23885_mc417_init(struct cx23885_dev *dev);
extern int mc417_memory_read(struct cx23885_dev *dev, u32 address, u32 *value);
extern int mc417_memory_write(struct cx23885_dev *dev, u32 address, u32 value);
+extern int mc417_register_read(struct cx23885_dev *dev,
+ u16 address, u32 *value);
+extern int mc417_register_write(struct cx23885_dev *dev,
+ u16 address, u32 value);
extern void mc417_gpio_set(struct cx23885_dev *dev, u32 mask);
extern void mc417_gpio_clear(struct cx23885_dev *dev, u32 mask);
extern void mc417_gpio_enable(struct cx23885_dev *dev, u32 mask, int asoutput);
diff --git a/drivers/media/video/cx23885/cx23888-ir.c b/drivers/media/video/cx23885/cx23888-ir.c
new file mode 100644
index 0000000..3ccc8af
--- /dev/null
+++ b/drivers/media/video/cx23885/cx23888-ir.c
@@ -0,0 +1,1239 @@
+/*
+ * Driver for the Conexant CX23885/7/8 PCIe bridge
+ *
+ * CX23888 Integrated Consumer Infrared Controller
+ *
+ * Copyright (C) 2009 Andy Walls <awalls@radix.net>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/kfifo.h>
+
+#include <media/v4l2-device.h>
+#include <media/v4l2-chip-ident.h>
+
+#include "cx23885.h"
+
+static unsigned int ir_888_debug;
+module_param(ir_888_debug, int, 0644);
+MODULE_PARM_DESC(ir_888_debug, "enable debug messages [CX23888 IR controller]");
+
+#define CX23888_IR_REG_BASE 0x170000
+/*
+ * These CX23888 register offsets have a straightforward one to one mapping
+ * to the CX23885 register offsets of 0x200 through 0x218
+ */
+#define CX23888_IR_CNTRL_REG 0x170000
+#define CNTRL_WIN_3_3 0x00000000
+#define CNTRL_WIN_4_3 0x00000001
+#define CNTRL_WIN_3_4 0x00000002
+#define CNTRL_WIN_4_4 0x00000003
+#define CNTRL_WIN 0x00000003
+#define CNTRL_EDG_NONE 0x00000000
+#define CNTRL_EDG_FALL 0x00000004
+#define CNTRL_EDG_RISE 0x00000008
+#define CNTRL_EDG_BOTH 0x0000000C
+#define CNTRL_EDG 0x0000000C
+#define CNTRL_DMD 0x00000010
+#define CNTRL_MOD 0x00000020
+#define CNTRL_RFE 0x00000040
+#define CNTRL_TFE 0x00000080
+#define CNTRL_RXE 0x00000100
+#define CNTRL_TXE 0x00000200
+#define CNTRL_RIC 0x00000400
+#define CNTRL_TIC 0x00000800
+#define CNTRL_CPL 0x00001000
+#define CNTRL_LBM 0x00002000
+#define CNTRL_R 0x00004000
+
+#define CX23888_IR_TXCLK_REG 0x170004
+#define TXCLK_TCD 0x0000FFFF
+
+#define CX23888_IR_RXCLK_REG 0x170008
+#define RXCLK_RCD 0x0000FFFF
+
+#define CX23888_IR_CDUTY_REG 0x17000C
+#define CDUTY_CDC 0x0000000F
+
+#define CX23888_IR_STATS_REG 0x170010
+#define STATS_RTO 0x00000001
+#define STATS_ROR 0x00000002
+#define STATS_RBY 0x00000004
+#define STATS_TBY 0x00000008
+#define STATS_RSR 0x00000010
+#define STATS_TSR 0x00000020
+
+#define CX23888_IR_IRQEN_REG 0x170014
+#define IRQEN_RTE 0x00000001
+#define IRQEN_ROE 0x00000002
+#define IRQEN_RSE 0x00000010
+#define IRQEN_TSE 0x00000020
+
+#define CX23888_IR_FILTR_REG 0x170018
+#define FILTR_LPF 0x0000FFFF
+
+/* This register doesn't follow the pattern; it's 0x23C on a CX23885 */
+#define CX23888_IR_FIFO_REG 0x170040
+#define FIFO_RXTX 0x0000FFFF
+#define FIFO_RXTX_LVL 0x00010000
+#define FIFO_RXTX_RTO 0x0001FFFF
+#define FIFO_RX_NDV 0x00020000
+#define FIFO_RX_DEPTH 8
+#define FIFO_TX_DEPTH 8
+
+/* CX23888 unique registers */
+#define CX23888_IR_SEEDP_REG 0x17001C
+#define CX23888_IR_TIMOL_REG 0x170020
+#define CX23888_IR_WAKE0_REG 0x170024
+#define CX23888_IR_WAKE1_REG 0x170028
+#define CX23888_IR_WAKE2_REG 0x17002C
+#define CX23888_IR_MASK0_REG 0x170030
+#define CX23888_IR_MASK1_REG 0x170034
+#define CX23888_IR_MAKS2_REG 0x170038
+#define CX23888_IR_DPIPG_REG 0x17003C
+#define CX23888_IR_LEARN_REG 0x170044
+
+#define CX23888_VIDCLK_FREQ 108000000 /* 108 MHz, BT.656 */
+#define CX23888_IR_REFCLK_FREQ (CX23888_VIDCLK_FREQ / 2)
+
+#define CX23888_IR_RX_KFIFO_SIZE (512 * sizeof(u32))
+#define CX23888_IR_TX_KFIFO_SIZE (512 * sizeof(u32))
+
+struct cx23888_ir_state {
+ struct v4l2_subdev sd;
+ struct cx23885_dev *dev;
+ u32 id;
+ u32 rev;
+
+ struct v4l2_subdev_ir_parameters rx_params;
+ struct mutex rx_params_lock;
+ atomic_t rxclk_divider;
+ atomic_t rx_invert;
+
+ struct kfifo *rx_kfifo;
+ spinlock_t rx_kfifo_lock;
+
+ struct v4l2_subdev_ir_parameters tx_params;
+ struct mutex tx_params_lock;
+ atomic_t txclk_divider;
+
+ struct kfifo *tx_kfifo;
+ spinlock_t tx_kfifo_lock;
+};
+
+static inline struct cx23888_ir_state *to_state(struct v4l2_subdev *sd)
+{
+ return v4l2_get_subdevdata(sd);
+}
+
+/*
+ * IR register block read and write functions
+ */
+static
+inline int cx23888_ir_write4(struct cx23885_dev *dev, u32 addr, u32 value)
+{
+ cx_write(addr, value);
+ return 0;
+}
+
+static inline u32 cx23888_ir_read4(struct cx23885_dev *dev, u32 addr)
+{
+ return cx_read(addr);
+}
+
+static inline int cx23888_ir_and_or4(struct cx23885_dev *dev, u32 addr,
+ u32 and_mask, u32 or_value)
+{
+ cx_andor(addr, ~and_mask, or_value);
+ return 0;
+}
+
+/*
+ * Rx and Tx Clock Divider register computations
+ *
+ * Note the largest clock divider value of 0xffff corresponds to:
+ * (0xffff + 1) * 1000 / 108/2 MHz = 1,213,629.629... ns
+ * which fits in 21 bits, so we'll use unsigned int for time arguments.
+ */
+static inline u16 count_to_clock_divider(unsigned int d)
+{
+ if (d > RXCLK_RCD + 1)
+ d = RXCLK_RCD;
+ else if (d < 2)
+ d = 1;
+ else
+ d--;
+ return (u16) d;
+}
+
+static inline u16 ns_to_clock_divider(unsigned int ns)
+{
+ return count_to_clock_divider(
+ DIV_ROUND_CLOSEST(CX23888_IR_REFCLK_FREQ / 1000000 * ns, 1000));
+}
+
+static inline unsigned int clock_divider_to_ns(unsigned int divider)
+{
+ /* Period of the Rx or Tx clock in ns */
+ return DIV_ROUND_CLOSEST((divider + 1) * 1000,
+ CX23888_IR_REFCLK_FREQ / 1000000);
+}
+
+static inline u16 carrier_freq_to_clock_divider(unsigned int freq)
+{
+ return count_to_clock_divider(
+ DIV_ROUND_CLOSEST(CX23888_IR_REFCLK_FREQ, freq * 16));
+}
+
+static inline unsigned int clock_divider_to_carrier_freq(unsigned int divider)
+{
+ return DIV_ROUND_CLOSEST(CX23888_IR_REFCLK_FREQ, (divider + 1) * 16);
+}
+
+static inline u16 freq_to_clock_divider(unsigned int freq,
+ unsigned int rollovers)
+{
+ return count_to_clock_divider(
+ DIV_ROUND_CLOSEST(CX23888_IR_REFCLK_FREQ, freq * rollovers));
+}
+
+static inline unsigned int clock_divider_to_freq(unsigned int divider,
+ unsigned int rollovers)
+{
+ return DIV_ROUND_CLOSEST(CX23888_IR_REFCLK_FREQ,
+ (divider + 1) * rollovers);
+}
+
+/*
+ * Low Pass Filter register calculations
+ *
+ * Note the largest count value of 0xffff corresponds to:
+ * 0xffff * 1000 / 108/2 MHz = 1,213,611.11... ns
+ * which fits in 21 bits, so we'll use unsigned int for time arguments.
+ */
+static inline u16 count_to_lpf_count(unsigned int d)
+{
+ if (d > FILTR_LPF)
+ d = FILTR_LPF;
+ else if (d < 4)
+ d = 0;
+ return (u16) d;
+}
+
+static inline u16 ns_to_lpf_count(unsigned int ns)
+{
+ return count_to_lpf_count(
+ DIV_ROUND_CLOSEST(CX23888_IR_REFCLK_FREQ / 1000000 * ns, 1000));
+}
+
+static inline unsigned int lpf_count_to_ns(unsigned int count)
+{
+ /* Duration of the Low Pass Filter rejection window in ns */
+ return DIV_ROUND_CLOSEST(count * 1000,
+ CX23888_IR_REFCLK_FREQ / 1000000);
+}
+
+static inline unsigned int lpf_count_to_us(unsigned int count)
+{
+ /* Duration of the Low Pass Filter rejection window in us */
+ return DIV_ROUND_CLOSEST(count, CX23888_IR_REFCLK_FREQ / 1000000);
+}
+
+/*
+ * FIFO register pulse width count compuations
+ */
+static u32 clock_divider_to_resolution(u16 divider)
+{
+ /*
+ * Resolution is the duration of 1 tick of the readable portion of
+ * of the pulse width counter as read from the FIFO. The two lsb's are
+ * not readable, hence the << 2. This function returns ns.
+ */
+ return DIV_ROUND_CLOSEST((1 << 2) * ((u32) divider + 1) * 1000,
+ CX23888_IR_REFCLK_FREQ / 1000000);
+}
+
+static u64 pulse_width_count_to_ns(u16 count, u16 divider)
+{
+ u64 n;
+ u32 rem;
+
+ /*
+ * The 2 lsb's of the pulse width timer count are not readable, hence
+ * the (count << 2) | 0x3
+ */
+ n = (((u64) count << 2) | 0x3) * (divider + 1) * 1000; /* millicycles */
+ rem = do_div(n, CX23888_IR_REFCLK_FREQ / 1000000); /* / MHz => ns */
+ if (rem >= CX23888_IR_REFCLK_FREQ / 1000000 / 2)
+ n++;
+ return n;
+}
+
+static unsigned int pulse_width_count_to_us(u16 count, u16 divider)
+{
+ u64 n;
+ u32 rem;
+
+ /*
+ * The 2 lsb's of the pulse width timer count are not readable, hence
+ * the (count << 2) | 0x3
+ */
+ n = (((u64) count << 2) | 0x3) * (divider + 1); /* cycles */
+ rem = do_div(n, CX23888_IR_REFCLK_FREQ / 1000000); /* / MHz => us */
+ if (rem >= CX23888_IR_REFCLK_FREQ / 1000000 / 2)
+ n++;
+ return (unsigned int) n;
+}
+
+/*
+ * Pulse Clocks computations: Combined Pulse Width Count & Rx Clock Counts
+ *
+ * The total pulse clock count is an 18 bit pulse width timer count as the most
+ * significant part and (up to) 16 bit clock divider count as a modulus.
+ * When the Rx clock divider ticks down to 0, it increments the 18 bit pulse
+ * width timer count's least significant bit.
+ */
+static u64 ns_to_pulse_clocks(u32 ns)
+{
+ u64 clocks;
+ u32 rem;
+ clocks = CX23888_IR_REFCLK_FREQ / 1000000 * (u64) ns; /* millicycles */
+ rem = do_div(clocks, 1000); /* /1000 = cycles */
+ if (rem >= 1000 / 2)
+ clocks++;
+ return clocks;
+}
+
+static u16 pulse_clocks_to_clock_divider(u64 count)
+{
+ u32 rem;
+
+ rem = do_div(count, (FIFO_RXTX << 2) | 0x3);
+
+ /* net result needs to be rounded down and decremented by 1 */
+ if (count > RXCLK_RCD + 1)
+ count = RXCLK_RCD;
+ else if (count < 2)
+ count = 1;
+ else
+ count--;
+ return (u16) count;
+}
+
+/*
+ * IR Control Register helpers
+ */
+enum tx_fifo_watermark {
+ TX_FIFO_HALF_EMPTY = 0,
+ TX_FIFO_EMPTY = CNTRL_TIC,
+};
+
+enum rx_fifo_watermark {
+ RX_FIFO_HALF_FULL = 0,
+ RX_FIFO_NOT_EMPTY = CNTRL_RIC,
+};
+
+static inline void control_tx_irq_watermark(struct cx23885_dev *dev,
+ enum tx_fifo_watermark level)
+{
+ cx23888_ir_and_or4(dev, CX23888_IR_CNTRL_REG, ~CNTRL_TIC, level);
+}
+
+static inline void control_rx_irq_watermark(struct cx23885_dev *dev,
+ enum rx_fifo_watermark level)
+{
+ cx23888_ir_and_or4(dev, CX23888_IR_CNTRL_REG, ~CNTRL_RIC, level);
+}
+
+static inline void control_tx_enable(struct cx23885_dev *dev, bool enable)
+{
+ cx23888_ir_and_or4(dev, CX23888_IR_CNTRL_REG, ~(CNTRL_TXE | CNTRL_TFE),
+ enable ? (CNTRL_TXE | CNTRL_TFE) : 0);
+}
+
+static inline void control_rx_enable(struct cx23885_dev *dev, bool enable)
+{
+ cx23888_ir_and_or4(dev, CX23888_IR_CNTRL_REG, ~(CNTRL_RXE | CNTRL_RFE),
+ enable ? (CNTRL_RXE | CNTRL_RFE) : 0);
+}
+
+static inline void control_tx_modulation_enable(struct cx23885_dev *dev,
+ bool enable)
+{
+ cx23888_ir_and_or4(dev, CX23888_IR_CNTRL_REG, ~CNTRL_MOD,
+ enable ? CNTRL_MOD : 0);
+}
+
+static inline void control_rx_demodulation_enable(struct cx23885_dev *dev,
+ bool enable)
+{
+ cx23888_ir_and_or4(dev, CX23888_IR_CNTRL_REG, ~CNTRL_DMD,
+ enable ? CNTRL_DMD : 0);
+}
+
+static inline void control_rx_s_edge_detection(struct cx23885_dev *dev,
+ u32 edge_types)
+{
+ cx23888_ir_and_or4(dev, CX23888_IR_CNTRL_REG, ~CNTRL_EDG_BOTH,
+ edge_types & CNTRL_EDG_BOTH);
+}
+
+static void control_rx_s_carrier_window(struct cx23885_dev *dev,
+ unsigned int carrier,
+ unsigned int *carrier_range_low,
+ unsigned int *carrier_range_high)
+{
+ u32 v;
+ unsigned int c16 = carrier * 16;
+
+ if (*carrier_range_low < DIV_ROUND_CLOSEST(c16, 16 + 3)) {
+ v = CNTRL_WIN_3_4;
+ *carrier_range_low = DIV_ROUND_CLOSEST(c16, 16 + 4);
+ } else {
+ v = CNTRL_WIN_3_3;
+ *carrier_range_low = DIV_ROUND_CLOSEST(c16, 16 + 3);
+ }
+
+ if (*carrier_range_high > DIV_ROUND_CLOSEST(c16, 16 - 3)) {
+ v |= CNTRL_WIN_4_3;
+ *carrier_range_high = DIV_ROUND_CLOSEST(c16, 16 - 4);
+ } else {
+ v |= CNTRL_WIN_3_3;
+ *carrier_range_high = DIV_ROUND_CLOSEST(c16, 16 - 3);
+ }
+ cx23888_ir_and_or4(dev, CX23888_IR_CNTRL_REG, ~CNTRL_WIN, v);
+}
+
+static inline void control_tx_polarity_invert(struct cx23885_dev *dev,
+ bool invert)
+{
+ cx23888_ir_and_or4(dev, CX23888_IR_CNTRL_REG, ~CNTRL_CPL,
+ invert ? CNTRL_CPL : 0);
+}
+
+/*
+ * IR Rx & Tx Clock Register helpers
+ */
+static unsigned int txclk_tx_s_carrier(struct cx23885_dev *dev,
+ unsigned int freq,
+ u16 *divider)
+{
+ *divider = carrier_freq_to_clock_divider(freq);
+ cx23888_ir_write4(dev, CX23888_IR_TXCLK_REG, *divider);
+ return clock_divider_to_carrier_freq(*divider);
+}
+
+static unsigned int rxclk_rx_s_carrier(struct cx23885_dev *dev,
+ unsigned int freq,
+ u16 *divider)
+{
+ *divider = carrier_freq_to_clock_divider(freq);
+ cx23888_ir_write4(dev, CX23888_IR_RXCLK_REG, *divider);
+ return clock_divider_to_carrier_freq(*divider);
+}
+
+static u32 txclk_tx_s_max_pulse_width(struct cx23885_dev *dev, u32 ns,
+ u16 *divider)
+{
+ u64 pulse_clocks;
+
+ if (ns > V4L2_SUBDEV_IR_PULSE_MAX_WIDTH_NS)
+ ns = V4L2_SUBDEV_IR_PULSE_MAX_WIDTH_NS;
+ pulse_clocks = ns_to_pulse_clocks(ns);
+ *divider = pulse_clocks_to_clock_divider(pulse_clocks);
+ cx23888_ir_write4(dev, CX23888_IR_TXCLK_REG, *divider);
+ return (u32) pulse_width_count_to_ns(FIFO_RXTX, *divider);
+}
+
+static u32 rxclk_rx_s_max_pulse_width(struct cx23885_dev *dev, u32 ns,
+ u16 *divider)
+{
+ u64 pulse_clocks;
+
+ if (ns > V4L2_SUBDEV_IR_PULSE_MAX_WIDTH_NS)
+ ns = V4L2_SUBDEV_IR_PULSE_MAX_WIDTH_NS;
+ pulse_clocks = ns_to_pulse_clocks(ns);
+ *divider = pulse_clocks_to_clock_divider(pulse_clocks);
+ cx23888_ir_write4(dev, CX23888_IR_RXCLK_REG, *divider);
+ return (u32) pulse_width_count_to_ns(FIFO_RXTX, *divider);
+}
+
+/*
+ * IR Tx Carrier Duty Cycle register helpers
+ */
+static unsigned int cduty_tx_s_duty_cycle(struct cx23885_dev *dev,
+ unsigned int duty_cycle)
+{
+ u32 n;
+ n = DIV_ROUND_CLOSEST(duty_cycle * 100, 625); /* 16ths of 100% */
+ if (n != 0)
+ n--;
+ if (n > 15)
+ n = 15;
+ cx23888_ir_write4(dev, CX23888_IR_CDUTY_REG, n);
+ return DIV_ROUND_CLOSEST((n + 1) * 100, 16);
+}
+
+/*
+ * IR Filter Register helpers
+ */
+static u32 filter_rx_s_min_width(struct cx23885_dev *dev, u32 min_width_ns)
+{
+ u32 count = ns_to_lpf_count(min_width_ns);
+ cx23888_ir_write4(dev, CX23888_IR_FILTR_REG, count);
+ return lpf_count_to_ns(count);
+}
+
+/*
+ * IR IRQ Enable Register helpers
+ */
+static inline void irqenable_rx(struct cx23885_dev *dev, u32 mask)
+{
+ mask &= (IRQEN_RTE | IRQEN_ROE | IRQEN_RSE);
+ cx23888_ir_and_or4(dev, CX23888_IR_IRQEN_REG,
+ ~(IRQEN_RTE | IRQEN_ROE | IRQEN_RSE), mask);
+}
+
+static inline void irqenable_tx(struct cx23885_dev *dev, u32 mask)
+{
+ mask &= IRQEN_TSE;
+ cx23888_ir_and_or4(dev, CX23888_IR_IRQEN_REG, ~IRQEN_TSE, mask);
+}
+
+/*
+ * V4L2 Subdevice IR Ops
+ */
+static int cx23888_ir_irq_handler(struct v4l2_subdev *sd, u32 status,
+ bool *handled)
+{
+ struct cx23888_ir_state *state = to_state(sd);
+ struct cx23885_dev *dev = state->dev;
+
+ u32 cntrl = cx23888_ir_read4(dev, CX23888_IR_CNTRL_REG);
+ u32 irqen = cx23888_ir_read4(dev, CX23888_IR_IRQEN_REG);
+ u32 stats = cx23888_ir_read4(dev, CX23888_IR_STATS_REG);
+
+ u32 rx_data[FIFO_RX_DEPTH];
+ int i, j, k;
+ u32 events, v;
+ int tsr, rsr, rto, ror, tse, rse, rte, roe, kror;
+
+ tsr = stats & STATS_TSR; /* Tx FIFO Service Request */
+ rsr = stats & STATS_RSR; /* Rx FIFO Service Request */
+ rto = stats & STATS_RTO; /* Rx Pulse Width Timer Time Out */
+ ror = stats & STATS_ROR; /* Rx FIFO Over Run */
+
+ tse = irqen & IRQEN_TSE; /* Tx FIFO Service Request IRQ Enable */
+ rse = irqen & IRQEN_RSE; /* Rx FIFO Service Reuqest IRQ Enable */
+ rte = irqen & IRQEN_RTE; /* Rx Pulse Width Timer Time Out IRQ Enable */
+ roe = irqen & IRQEN_ROE; /* Rx FIFO Over Run IRQ Enable */
+
+ *handled = false;
+ v4l2_dbg(2, ir_888_debug, sd, "IRQ Status: %s %s %s %s %s %s\n",
+ tsr ? "tsr" : " ", rsr ? "rsr" : " ",
+ rto ? "rto" : " ", ror ? "ror" : " ",
+ stats & STATS_TBY ? "tby" : " ",
+ stats & STATS_RBY ? "rby" : " ");
+
+ v4l2_dbg(2, ir_888_debug, sd, "IRQ Enables: %s %s %s %s\n",
+ tse ? "tse" : " ", rse ? "rse" : " ",
+ rte ? "rte" : " ", roe ? "roe" : " ");
+
+ /*
+ * Transmitter interrupt service
+ */
+ if (tse && tsr) {
+ /*
+ * TODO:
+ * Check the watermark threshold setting
+ * Pull FIFO_TX_DEPTH or FIFO_TX_DEPTH/2 entries from tx_kfifo
+ * Push the data to the hardware FIFO.
+ * If there was nothing more to send in the tx_kfifo, disable
+ * the TSR IRQ and notify the v4l2_device.
+ * If there was something in the tx_kfifo, check the tx_kfifo
+ * level and notify the v4l2_device, if it is low.
+ */
+ /* For now, inhibit TSR interrupt until Tx is implemented */
+ irqenable_tx(dev, 0);
+ events = V4L2_SUBDEV_IR_TX_FIFO_SERVICE_REQ;
+ v4l2_subdev_notify(sd, V4L2_SUBDEV_IR_TX_NOTIFY, &events);
+ *handled = true;
+ }
+
+ /*
+ * Receiver interrupt service
+ */
+ kror = 0;
+ if ((rse && rsr) || (rte && rto)) {
+ /*
+ * Receive data on RSR to clear the STATS_RSR.
+ * Receive data on RTO, since we may not have yet hit the RSR
+ * watermark when we receive the RTO.
+ */
+ for (i = 0, v = FIFO_RX_NDV;
+ (v & FIFO_RX_NDV) && !kror; i = 0) {
+ for (j = 0;
+ (v & FIFO_RX_NDV) && j < FIFO_RX_DEPTH; j++) {
+ v = cx23888_ir_read4(dev, CX23888_IR_FIFO_REG);
+ rx_data[i++] = v & ~FIFO_RX_NDV;
+ }
+ if (i == 0)
+ break;
+ j = i * sizeof(u32);
+ k = kfifo_put(state->rx_kfifo,
+ (unsigned char *) rx_data, j);
+ if (k != j)
+ kror++; /* rx_kfifo over run */
+ }
+ *handled = true;
+ }
+
+ events = 0;
+ v = 0;
+ if (kror) {
+ events |= V4L2_SUBDEV_IR_RX_SW_FIFO_OVERRUN;
+ v4l2_err(sd, "IR receiver software FIFO overrun\n");
+ }
+ if (roe && ror) {
+ /*
+ * The RX FIFO Enable (CNTRL_RFE) must be toggled to clear
+ * the Rx FIFO Over Run status (STATS_ROR)
+ */
+ v |= CNTRL_RFE;
+ events |= V4L2_SUBDEV_IR_RX_HW_FIFO_OVERRUN;
+ v4l2_err(sd, "IR receiver hardware FIFO overrun\n");
+ }
+ if (rte && rto) {
+ /*
+ * The IR Receiver Enable (CNTRL_RXE) must be toggled to clear
+ * the Rx Pulse Width Timer Time Out (STATS_RTO)
+ */
+ v |= CNTRL_RXE;
+ events |= V4L2_SUBDEV_IR_RX_END_OF_RX_DETECTED;
+ }
+ if (v) {
+ /* Clear STATS_ROR & STATS_RTO as needed by reseting hardware */
+ cx23888_ir_write4(dev, CX23888_IR_CNTRL_REG, cntrl & ~v);
+ cx23888_ir_write4(dev, CX23888_IR_CNTRL_REG, cntrl);
+ *handled = true;
+ }
+ if (kfifo_len(state->rx_kfifo) >= CX23888_IR_RX_KFIFO_SIZE / 2)
+ events |= V4L2_SUBDEV_IR_RX_FIFO_SERVICE_REQ;
+
+ if (events)
+ v4l2_subdev_notify(sd, V4L2_SUBDEV_IR_RX_NOTIFY, &events);
+ return 0;
+}
+
+/* Receiver */
+static int cx23888_ir_rx_read(struct v4l2_subdev *sd, u8 *buf, size_t count,
+ ssize_t *num)
+{
+ struct cx23888_ir_state *state = to_state(sd);
+ bool invert = (bool) atomic_read(&state->rx_invert);
+ u16 divider = (u16) atomic_read(&state->rxclk_divider);
+
+ unsigned int i, n;
+ u32 *p;
+ u32 u, v;
+
+ n = count / sizeof(u32) * sizeof(u32);
+ if (n == 0) {
+ *num = 0;
+ return 0;
+ }
+
+ n = kfifo_get(state->rx_kfifo, buf, n);
+
+ n /= sizeof(u32);
+ *num = n * sizeof(u32);
+
+ for (p = (u32 *) buf, i = 0; i < n; p++, i++) {
+ if ((*p & FIFO_RXTX_RTO) == FIFO_RXTX_RTO) {
+ *p = V4L2_SUBDEV_IR_PULSE_RX_SEQ_END;
+ v4l2_dbg(2, ir_888_debug, sd, "rx read: end of rx\n");
+ continue;
+ }
+
+ u = (*p & FIFO_RXTX_LVL) ? V4L2_SUBDEV_IR_PULSE_LEVEL_MASK : 0;
+ if (invert)
+ u = u ? 0 : V4L2_SUBDEV_IR_PULSE_LEVEL_MASK;
+
+ v = (u32) pulse_width_count_to_ns((u16) (*p & FIFO_RXTX),
+ divider);
+ if (v >= V4L2_SUBDEV_IR_PULSE_MAX_WIDTH_NS)
+ v = V4L2_SUBDEV_IR_PULSE_MAX_WIDTH_NS - 1;
+
+ *p = u | v;
+
+ v4l2_dbg(2, ir_888_debug, sd, "rx read: %10u ns %s\n",
+ v, u ? "mark" : "space");
+ }
+ return 0;
+}
+
+static int cx23888_ir_rx_g_parameters(struct v4l2_subdev *sd,
+ struct v4l2_subdev_ir_parameters *p)
+{
+ struct cx23888_ir_state *state = to_state(sd);
+ mutex_lock(&state->rx_params_lock);
+ memcpy(p, &state->rx_params, sizeof(struct v4l2_subdev_ir_parameters));
+ mutex_unlock(&state->rx_params_lock);
+ return 0;
+}
+
+static int cx23888_ir_rx_shutdown(struct v4l2_subdev *sd)
+{
+ struct cx23888_ir_state *state = to_state(sd);
+ struct cx23885_dev *dev = state->dev;
+
+ mutex_lock(&state->rx_params_lock);
+
+ /* Disable or slow down all IR Rx circuits and counters */
+ irqenable_rx(dev, 0);
+ control_rx_enable(dev, false);
+ control_rx_demodulation_enable(dev, false);
+ control_rx_s_edge_detection(dev, CNTRL_EDG_NONE);
+ filter_rx_s_min_width(dev, 0);
+ cx23888_ir_write4(dev, CX23888_IR_RXCLK_REG, RXCLK_RCD);
+
+ state->rx_params.shutdown = true;
+
+ mutex_unlock(&state->rx_params_lock);
+ return 0;
+}
+
+static int cx23888_ir_rx_s_parameters(struct v4l2_subdev *sd,
+ struct v4l2_subdev_ir_parameters *p)
+{
+ struct cx23888_ir_state *state = to_state(sd);
+ struct cx23885_dev *dev = state->dev;
+ struct v4l2_subdev_ir_parameters *o = &state->rx_params;
+ u16 rxclk_divider;
+
+ if (p->shutdown)
+ return cx23888_ir_rx_shutdown(sd);
+
+ if (p->mode != V4L2_SUBDEV_IR_MODE_PULSE_WIDTH)
+ return -ENOSYS;
+
+ mutex_lock(&state->rx_params_lock);
+
+ o->shutdown = p->shutdown;
+
+ o->mode = p->mode = V4L2_SUBDEV_IR_MODE_PULSE_WIDTH;
+
+ o->bytes_per_data_element = p->bytes_per_data_element = sizeof(u32);
+
+ /* Before we tweak the hardware, we have to disable the receiver */
+ irqenable_rx(dev, 0);
+ control_rx_enable(dev, false);
+
+ control_rx_demodulation_enable(dev, p->modulation);
+ o->modulation = p->modulation;
+
+ if (p->modulation) {
+ p->carrier_freq = rxclk_rx_s_carrier(dev, p->carrier_freq,
+ &rxclk_divider);
+
+ o->carrier_freq = p->carrier_freq;
+
+ o->duty_cycle = p->duty_cycle = 50;
+
+ control_rx_s_carrier_window(dev, p->carrier_freq,
+ &p->carrier_range_lower,
+ &p->carrier_range_upper);
+ o->carrier_range_lower = p->carrier_range_lower;
+ o->carrier_range_upper = p->carrier_range_upper;
+ } else {
+ p->max_pulse_width =
+ rxclk_rx_s_max_pulse_width(dev, p->max_pulse_width,
+ &rxclk_divider);
+ o->max_pulse_width = p->max_pulse_width;
+ }
+ atomic_set(&state->rxclk_divider, rxclk_divider);
+
+ p->noise_filter_min_width =
+ filter_rx_s_min_width(dev, p->noise_filter_min_width);
+ o->noise_filter_min_width = p->noise_filter_min_width;
+
+ p->resolution = clock_divider_to_resolution(rxclk_divider);
+ o->resolution = p->resolution;
+
+ /* FIXME - make this dependent on resolution for better performance */
+ control_rx_irq_watermark(dev, RX_FIFO_HALF_FULL);
+
+ control_rx_s_edge_detection(dev, CNTRL_EDG_BOTH);
+
+ o->invert = p->invert;
+ atomic_set(&state->rx_invert, p->invert);
+
+ o->interrupt_enable = p->interrupt_enable;
+ o->enable = p->enable;
+ if (p->enable) {
+ kfifo_reset(state->rx_kfifo);
+ if (p->interrupt_enable)
+ irqenable_rx(dev, IRQEN_RSE | IRQEN_RTE | IRQEN_ROE);
+ control_rx_enable(dev, p->enable);
+ }
+
+ mutex_unlock(&state->rx_params_lock);
+ return 0;
+}
+
+/* Transmitter */
+static int cx23888_ir_tx_write(struct v4l2_subdev *sd, u8 *buf, size_t count,
+ ssize_t *num)
+{
+ struct cx23888_ir_state *state = to_state(sd);
+ struct cx23885_dev *dev = state->dev;
+ /* For now enable the Tx FIFO Service interrupt & pretend we did work */
+ irqenable_tx(dev, IRQEN_TSE);
+ *num = count;
+ return 0;
+}
+
+static int cx23888_ir_tx_g_parameters(struct v4l2_subdev *sd,
+ struct v4l2_subdev_ir_parameters *p)
+{
+ struct cx23888_ir_state *state = to_state(sd);
+ mutex_lock(&state->tx_params_lock);
+ memcpy(p, &state->tx_params, sizeof(struct v4l2_subdev_ir_parameters));
+ mutex_unlock(&state->tx_params_lock);
+ return 0;
+}
+
+static int cx23888_ir_tx_shutdown(struct v4l2_subdev *sd)
+{
+ struct cx23888_ir_state *state = to_state(sd);
+ struct cx23885_dev *dev = state->dev;
+
+ mutex_lock(&state->tx_params_lock);
+
+ /* Disable or slow down all IR Tx circuits and counters */
+ irqenable_tx(dev, 0);
+ control_tx_enable(dev, false);
+ control_tx_modulation_enable(dev, false);
+ cx23888_ir_write4(dev, CX23888_IR_TXCLK_REG, TXCLK_TCD);
+
+ state->tx_params.shutdown = true;
+
+ mutex_unlock(&state->tx_params_lock);
+ return 0;
+}
+
+static int cx23888_ir_tx_s_parameters(struct v4l2_subdev *sd,
+ struct v4l2_subdev_ir_parameters *p)
+{
+ struct cx23888_ir_state *state = to_state(sd);
+ struct cx23885_dev *dev = state->dev;
+ struct v4l2_subdev_ir_parameters *o = &state->tx_params;
+ u16 txclk_divider;
+
+ if (p->shutdown)
+ return cx23888_ir_tx_shutdown(sd);
+
+ if (p->mode != V4L2_SUBDEV_IR_MODE_PULSE_WIDTH)
+ return -ENOSYS;
+
+ mutex_lock(&state->tx_params_lock);
+
+ o->shutdown = p->shutdown;
+
+ o->mode = p->mode = V4L2_SUBDEV_IR_MODE_PULSE_WIDTH;
+
+ o->bytes_per_data_element = p->bytes_per_data_element = sizeof(u32);
+
+ /* Before we tweak the hardware, we have to disable the transmitter */
+ irqenable_tx(dev, 0);
+ control_tx_enable(dev, false);
+
+ control_tx_modulation_enable(dev, p->modulation);
+ o->modulation = p->modulation;
+
+ if (p->modulation) {
+ p->carrier_freq = txclk_tx_s_carrier(dev, p->carrier_freq,
+ &txclk_divider);
+ o->carrier_freq = p->carrier_freq;
+
+ p->duty_cycle = cduty_tx_s_duty_cycle(dev, p->duty_cycle);
+ o->duty_cycle = p->duty_cycle;
+ } else {
+ p->max_pulse_width =
+ txclk_tx_s_max_pulse_width(dev, p->max_pulse_width,
+ &txclk_divider);
+ o->max_pulse_width = p->max_pulse_width;
+ }
+ atomic_set(&state->txclk_divider, txclk_divider);
+
+ p->resolution = clock_divider_to_resolution(txclk_divider);
+ o->resolution = p->resolution;
+
+ /* FIXME - make this dependent on resolution for better performance */
+ control_tx_irq_watermark(dev, TX_FIFO_HALF_EMPTY);
+
+ control_tx_polarity_invert(dev, p->invert);
+ o->invert = p->invert;
+
+ o->interrupt_enable = p->interrupt_enable;
+ o->enable = p->enable;
+ if (p->enable) {
+ kfifo_reset(state->tx_kfifo);
+ if (p->interrupt_enable)
+ irqenable_tx(dev, IRQEN_TSE);
+ control_tx_enable(dev, p->enable);
+ }
+
+ mutex_unlock(&state->tx_params_lock);
+ return 0;
+}
+
+
+/*
+ * V4L2 Subdevice Core Ops
+ */
+static int cx23888_ir_log_status(struct v4l2_subdev *sd)
+{
+ struct cx23888_ir_state *state = to_state(sd);
+ struct cx23885_dev *dev = state->dev;
+ char *s;
+ int i, j;
+
+ u32 cntrl = cx23888_ir_read4(dev, CX23888_IR_CNTRL_REG);
+ u32 txclk = cx23888_ir_read4(dev, CX23888_IR_TXCLK_REG) & TXCLK_TCD;
+ u32 rxclk = cx23888_ir_read4(dev, CX23888_IR_RXCLK_REG) & RXCLK_RCD;
+ u32 cduty = cx23888_ir_read4(dev, CX23888_IR_CDUTY_REG) & CDUTY_CDC;
+ u32 stats = cx23888_ir_read4(dev, CX23888_IR_STATS_REG);
+ u32 irqen = cx23888_ir_read4(dev, CX23888_IR_IRQEN_REG);
+ u32 filtr = cx23888_ir_read4(dev, CX23888_IR_FILTR_REG) & FILTR_LPF;
+
+ v4l2_info(sd, "IR Receiver:\n");
+ v4l2_info(sd, "\tEnabled: %s\n",
+ cntrl & CNTRL_RXE ? "yes" : "no");
+ v4l2_info(sd, "\tDemodulation from a carrier: %s\n",
+ cntrl & CNTRL_DMD ? "enabled" : "disabled");
+ v4l2_info(sd, "\tFIFO: %s\n",
+ cntrl & CNTRL_RFE ? "enabled" : "disabled");
+ switch (cntrl & CNTRL_EDG) {
+ case CNTRL_EDG_NONE:
+ s = "disabled";
+ break;
+ case CNTRL_EDG_FALL:
+ s = "falling edge";
+ break;
+ case CNTRL_EDG_RISE:
+ s = "rising edge";
+ break;
+ case CNTRL_EDG_BOTH:
+ s = "rising & falling edges";
+ break;
+ default:
+ s = "??? edge";
+ break;
+ }
+ v4l2_info(sd, "\tPulse timers' start/stop trigger: %s\n", s);
+ v4l2_info(sd, "\tFIFO data on pulse timer overflow: %s\n",
+ cntrl & CNTRL_R ? "not loaded" : "overflow marker");
+ v4l2_info(sd, "\tFIFO interrupt watermark: %s\n",
+ cntrl & CNTRL_RIC ? "not empty" : "half full or greater");
+ v4l2_info(sd, "\tLoopback mode: %s\n",
+ cntrl & CNTRL_LBM ? "loopback active" : "normal receive");
+ if (cntrl & CNTRL_DMD) {
+ v4l2_info(sd, "\tExpected carrier (16 clocks): %u Hz\n",
+ clock_divider_to_carrier_freq(rxclk));
+ switch (cntrl & CNTRL_WIN) {
+ case CNTRL_WIN_3_3:
+ i = 3;
+ j = 3;
+ break;
+ case CNTRL_WIN_4_3:
+ i = 4;
+ j = 3;
+ break;
+ case CNTRL_WIN_3_4:
+ i = 3;
+ j = 4;
+ break;
+ case CNTRL_WIN_4_4:
+ i = 4;
+ j = 4;
+ break;
+ default:
+ i = 0;
+ j = 0;
+ break;
+ }
+ v4l2_info(sd, "\tNext carrier edge window: 16 clocks "
+ "-%1d/+%1d, %u to %u Hz\n", i, j,
+ clock_divider_to_freq(rxclk, 16 + j),
+ clock_divider_to_freq(rxclk, 16 - i));
+ } else {
+ v4l2_info(sd, "\tMax measurable pulse width: %u us, "
+ "%llu ns\n",
+ pulse_width_count_to_us(FIFO_RXTX, rxclk),
+ pulse_width_count_to_ns(FIFO_RXTX, rxclk));
+ }
+ v4l2_info(sd, "\tLow pass filter: %s\n",
+ filtr ? "enabled" : "disabled");
+ if (filtr)
+ v4l2_info(sd, "\tMin acceptable pulse width (LPF): %u us, "
+ "%u ns\n",
+ lpf_count_to_us(filtr),
+ lpf_count_to_ns(filtr));
+ v4l2_info(sd, "\tPulse width timer timed-out: %s\n",
+ stats & STATS_RTO ? "yes" : "no");
+ v4l2_info(sd, "\tPulse width timer time-out intr: %s\n",
+ irqen & IRQEN_RTE ? "enabled" : "disabled");
+ v4l2_info(sd, "\tFIFO overrun: %s\n",
+ stats & STATS_ROR ? "yes" : "no");
+ v4l2_info(sd, "\tFIFO overrun interrupt: %s\n",
+ irqen & IRQEN_ROE ? "enabled" : "disabled");
+ v4l2_info(sd, "\tBusy: %s\n",
+ stats & STATS_RBY ? "yes" : "no");
+ v4l2_info(sd, "\tFIFO service requested: %s\n",
+ stats & STATS_RSR ? "yes" : "no");
+ v4l2_info(sd, "\tFIFO service request interrupt: %s\n",
+ irqen & IRQEN_RSE ? "enabled" : "disabled");
+
+ v4l2_info(sd, "IR Transmitter:\n");
+ v4l2_info(sd, "\tEnabled: %s\n",
+ cntrl & CNTRL_TXE ? "yes" : "no");
+ v4l2_info(sd, "\tModulation onto a carrier: %s\n",
+ cntrl & CNTRL_MOD ? "enabled" : "disabled");
+ v4l2_info(sd, "\tFIFO: %s\n",
+ cntrl & CNTRL_TFE ? "enabled" : "disabled");
+ v4l2_info(sd, "\tFIFO interrupt watermark: %s\n",
+ cntrl & CNTRL_TIC ? "not empty" : "half full or less");
+ v4l2_info(sd, "\tSignal polarity: %s\n",
+ cntrl & CNTRL_CPL ? "0:mark 1:space" : "0:space 1:mark");
+ if (cntrl & CNTRL_MOD) {
+ v4l2_info(sd, "\tCarrier (16 clocks): %u Hz\n",
+ clock_divider_to_carrier_freq(txclk));
+ v4l2_info(sd, "\tCarrier duty cycle: %2u/16\n",
+ cduty + 1);
+ } else {
+ v4l2_info(sd, "\tMax pulse width: %u us, "
+ "%llu ns\n",
+ pulse_width_count_to_us(FIFO_RXTX, txclk),
+ pulse_width_count_to_ns(FIFO_RXTX, txclk));
+ }
+ v4l2_info(sd, "\tBusy: %s\n",
+ stats & STATS_TBY ? "yes" : "no");
+ v4l2_info(sd, "\tFIFO service requested: %s\n",
+ stats & STATS_TSR ? "yes" : "no");
+ v4l2_info(sd, "\tFIFO service request interrupt: %s\n",
+ irqen & IRQEN_TSE ? "enabled" : "disabled");
+
+ return 0;
+}
+
+static inline int cx23888_ir_dbg_match(const struct v4l2_dbg_match *match)
+{
+ return match->type == V4L2_CHIP_MATCH_HOST && match->addr == 2;
+}
+
+static int cx23888_ir_g_chip_ident(struct v4l2_subdev *sd,
+ struct v4l2_dbg_chip_ident *chip)
+{
+ struct cx23888_ir_state *state = to_state(sd);
+
+ if (cx23888_ir_dbg_match(&chip->match)) {
+ chip->ident = state->id;
+ chip->revision = state->rev;
+ }
+ return 0;
+}
+
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+static int cx23888_ir_g_register(struct v4l2_subdev *sd,
+ struct v4l2_dbg_register *reg)
+{
+ struct cx23888_ir_state *state = to_state(sd);
+ u32 addr = CX23888_IR_REG_BASE + (u32) reg->reg;
+
+ if (!cx23888_ir_dbg_match(®->match))
+ return -EINVAL;
+ if ((addr & 0x3) != 0)
+ return -EINVAL;
+ if (addr < CX23888_IR_CNTRL_REG || addr > CX23888_IR_LEARN_REG)
+ return -EINVAL;
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+ reg->size = 4;
+ reg->val = cx23888_ir_read4(state->dev, addr);
+ return 0;
+}
+
+static int cx23888_ir_s_register(struct v4l2_subdev *sd,
+ struct v4l2_dbg_register *reg)
+{
+ struct cx23888_ir_state *state = to_state(sd);
+ u32 addr = CX23888_IR_REG_BASE + (u32) reg->reg;
+
+ if (!cx23888_ir_dbg_match(®->match))
+ return -EINVAL;
+ if ((addr & 0x3) != 0)
+ return -EINVAL;
+ if (addr < CX23888_IR_CNTRL_REG || addr > CX23888_IR_LEARN_REG)
+ return -EINVAL;
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+ cx23888_ir_write4(state->dev, addr, reg->val);
+ return 0;
+}
+#endif
+
+static const struct v4l2_subdev_core_ops cx23888_ir_core_ops = {
+ .g_chip_ident = cx23888_ir_g_chip_ident,
+ .log_status = cx23888_ir_log_status,
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+ .g_register = cx23888_ir_g_register,
+ .s_register = cx23888_ir_s_register,
+#endif
+};
+
+static const struct v4l2_subdev_ir_ops cx23888_ir_ir_ops = {
+ .interrupt_service_routine = cx23888_ir_irq_handler,
+
+ .rx_read = cx23888_ir_rx_read,
+ .rx_g_parameters = cx23888_ir_rx_g_parameters,
+ .rx_s_parameters = cx23888_ir_rx_s_parameters,
+
+ .tx_write = cx23888_ir_tx_write,
+ .tx_g_parameters = cx23888_ir_tx_g_parameters,
+ .tx_s_parameters = cx23888_ir_tx_s_parameters,
+};
+
+static const struct v4l2_subdev_ops cx23888_ir_controller_ops = {
+ .core = &cx23888_ir_core_ops,
+ .ir = &cx23888_ir_ir_ops,
+};
+
+static const struct v4l2_subdev_ir_parameters default_rx_params = {
+ .bytes_per_data_element = sizeof(u32),
+ .mode = V4L2_SUBDEV_IR_MODE_PULSE_WIDTH,
+
+ .enable = false,
+ .interrupt_enable = false,
+ .shutdown = true,
+
+ .modulation = true,
+ .carrier_freq = 36000, /* 36 kHz - RC-5, RC-6, and RC-6A carrier */
+
+ /* RC-5: 666,667 ns = 1/36 kHz * 32 cycles * 1 mark * 0.75 */
+ /* RC-6A: 333,333 ns = 1/36 kHz * 16 cycles * 1 mark * 0.75 */
+ .noise_filter_min_width = 333333, /* ns */
+ .carrier_range_lower = 35000,
+ .carrier_range_upper = 37000,
+ .invert = false,
+};
+
+static const struct v4l2_subdev_ir_parameters default_tx_params = {
+ .bytes_per_data_element = sizeof(u32),
+ .mode = V4L2_SUBDEV_IR_MODE_PULSE_WIDTH,
+
+ .enable = false,
+ .interrupt_enable = false,
+ .shutdown = true,
+
+ .modulation = true,
+ .carrier_freq = 36000, /* 36 kHz - RC-5 carrier */
+ .duty_cycle = 25, /* 25 % - RC-5 carrier */
+ .invert = false,
+};
+
+int cx23888_ir_probe(struct cx23885_dev *dev)
+{
+ struct cx23888_ir_state *state;
+ struct v4l2_subdev *sd;
+ struct v4l2_subdev_ir_parameters default_params;
+ int ret;
+
+ state = kzalloc(sizeof(struct cx23888_ir_state), GFP_KERNEL);
+ if (state == NULL)
+ return -ENOMEM;
+
+ spin_lock_init(&state->rx_kfifo_lock);
+ state->rx_kfifo = kfifo_alloc(CX23888_IR_RX_KFIFO_SIZE, GFP_KERNEL,
+ &state->rx_kfifo_lock);
+ if (state->rx_kfifo == NULL)
+ return -ENOMEM;
+
+ spin_lock_init(&state->tx_kfifo_lock);
+ state->tx_kfifo = kfifo_alloc(CX23888_IR_TX_KFIFO_SIZE, GFP_KERNEL,
+ &state->tx_kfifo_lock);
+ if (state->tx_kfifo == NULL) {
+ kfifo_free(state->rx_kfifo);
+ return -ENOMEM;
+ }
+
+ state->dev = dev;
+ state->id = V4L2_IDENT_CX23888_IR;
+ state->rev = 0;
+ sd = &state->sd;
+
+ v4l2_subdev_init(sd, &cx23888_ir_controller_ops);
+ v4l2_set_subdevdata(sd, state);
+ /* FIXME - fix the formatting of dev->v4l2_dev.name and use it */
+ snprintf(sd->name, sizeof(sd->name), "%s/888-ir", dev->name);
+ sd->grp_id = CX23885_HW_888_IR;
+
+ ret = v4l2_device_register_subdev(&dev->v4l2_dev, sd);
+ if (ret == 0) {
+ /*
+ * Ensure no interrupts arrive from '888 specific conditions,
+ * since we ignore them in this driver to have commonality with
+ * similar IR controller cores.
+ */
+ cx23888_ir_write4(dev, CX23888_IR_IRQEN_REG, 0);
+
+ mutex_init(&state->rx_params_lock);
+ memcpy(&default_params, &default_rx_params,
+ sizeof(struct v4l2_subdev_ir_parameters));
+ v4l2_subdev_call(sd, ir, rx_s_parameters, &default_params);
+
+ mutex_init(&state->tx_params_lock);
+ memcpy(&default_params, &default_tx_params,
+ sizeof(struct v4l2_subdev_ir_parameters));
+ v4l2_subdev_call(sd, ir, tx_s_parameters, &default_params);
+ } else {
+ kfifo_free(state->rx_kfifo);
+ kfifo_free(state->tx_kfifo);
+ }
+ return ret;
+}
+
+int cx23888_ir_remove(struct cx23885_dev *dev)
+{
+ struct v4l2_subdev *sd;
+ struct cx23888_ir_state *state;
+
+ sd = cx23885_find_hw(dev, CX23885_HW_888_IR);
+ if (sd == NULL)
+ return -ENODEV;
+
+ cx23888_ir_rx_shutdown(sd);
+ cx23888_ir_tx_shutdown(sd);
+
+ state = to_state(sd);
+ v4l2_device_unregister_subdev(sd);
+ kfifo_free(state->rx_kfifo);
+ kfifo_free(state->tx_kfifo);
+ kfree(state);
+ /* Nothing more to free() as state held the actual v4l2_subdev object */
+ return 0;
+}
diff --git a/drivers/media/video/cx23885/cx23888-ir.h b/drivers/media/video/cx23885/cx23888-ir.h
new file mode 100644
index 0000000..3d446f9
--- /dev/null
+++ b/drivers/media/video/cx23885/cx23888-ir.h
@@ -0,0 +1,28 @@
+/*
+ * Driver for the Conexant CX23885/7/8 PCIe bridge
+ *
+ * CX23888 Integrated Consumer Infrared Controller
+ *
+ * Copyright (C) 2009 Andy Walls <awalls@radix.net>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#ifndef _CX23888_IR_H_
+#define _CX23888_IR_H_
+int cx23888_ir_probe(struct cx23885_dev *dev);
+int cx23888_ir_remove(struct cx23885_dev *dev);
+#endif
diff --git a/drivers/media/video/cx25840/cx25840-audio.c b/drivers/media/video/cx25840/cx25840-audio.c
index 2f846f5e..45608d5 100644
--- a/drivers/media/video/cx25840/cx25840-audio.c
+++ b/drivers/media/video/cx25840/cx25840-audio.c
@@ -23,87 +23,137 @@
#include "cx25840-core.h"
-static int set_audclk_freq(struct i2c_client *client, u32 freq)
+/*
+ * Note: The PLL and SRC parameters are based on a reference frequency that
+ * would ideally be:
+ *
+ * NTSC Color subcarrier freq * 8 = 4.5 MHz/286 * 455/2 * 8 = 28.63636363... MHz
+ *
+ * However, it's not the exact reference frequency that matters, only that the
+ * firmware and modules that comprise the driver for a particular board all
+ * use the same value (close to the ideal value).
+ *
+ * Comments below will note which reference frequency is assumed for various
+ * parameters. They will usually be one of
+ *
+ * ref_freq = 28.636360 MHz
+ * or
+ * ref_freq = 28.636363 MHz
+ */
+
+static int cx25840_set_audclk_freq(struct i2c_client *client, u32 freq)
{
struct cx25840_state *state = to_state(i2c_get_clientdata(client));
- if (freq != 32000 && freq != 44100 && freq != 48000)
- return -EINVAL;
-
- /* common for all inputs and rates */
- /* SA_MCLK_SEL=1, SA_MCLK_DIV=0x10 */
- if (!state->is_cx23885 && !state->is_cx231xx)
- cx25840_write(client, 0x127, 0x50);
-
if (state->aud_input != CX25840_AUDIO_SERIAL) {
switch (freq) {
case 32000:
- if (state->is_cx23885) {
- /* We don't have register values
- * so avoid destroying registers. */
- break;
- }
+ /*
+ * VID_PLL Integer = 0x0f, VID_PLL Post Divider = 0x04
+ * AUX_PLL Integer = 0x06, AUX PLL Post Divider = 0x10
+ */
+ cx25840_write4(client, 0x108, 0x1006040f);
- if (!state->is_cx231xx) {
- /* VID_PLL and AUX_PLL */
- cx25840_write4(client, 0x108, 0x1006040f);
+ /*
+ * VID_PLL Fraction (register 0x10c) = 0x2be2fe
+ * 28636360 * 0xf.15f17f0/4 = 108 MHz
+ * 432 MHz pre-postdivide
+ */
- /* AUX_PLL_FRAC */
- cx25840_write4(client, 0x110, 0x01bb39ee);
- }
+ /*
+ * AUX_PLL Fraction = 0x1bb39ee
+ * 28636363 * 0x6.dd9cf70/0x10 = 32000 * 384
+ * 196.6 MHz pre-postdivide
+ * FIXME < 200 MHz is out of specified valid range
+ * FIXME 28636363 ref_freq doesn't match VID PLL ref
+ */
+ cx25840_write4(client, 0x110, 0x01bb39ee);
- if (state->is_cx25836)
+ /*
+ * SA_MCLK_SEL = 1
+ * SA_MCLK_DIV = 0x10 = 384/384 * AUX_PLL post dvivider
+ */
+ cx25840_write(client, 0x127, 0x50);
+
+ if (is_cx2583x(state))
break;
- /* src3/4/6_ctl = 0x0801f77f */
+ /* src3/4/6_ctl */
+ /* 0x1.f77f = (4 * 28636360/8 * 2/455) / 32000 */
cx25840_write4(client, 0x900, 0x0801f77f);
cx25840_write4(client, 0x904, 0x0801f77f);
cx25840_write4(client, 0x90c, 0x0801f77f);
break;
case 44100:
- if (state->is_cx23885) {
- /* We don't have register values
- * so avoid destroying registers. */
- break;
- }
+ /*
+ * VID_PLL Integer = 0x0f, VID_PLL Post Divider = 0x04
+ * AUX_PLL Integer = 0x09, AUX PLL Post Divider = 0x10
+ */
+ cx25840_write4(client, 0x108, 0x1009040f);
- if (!state->is_cx231xx) {
- /* VID_PLL and AUX_PLL */
- cx25840_write4(client, 0x108, 0x1009040f);
+ /*
+ * VID_PLL Fraction (register 0x10c) = 0x2be2fe
+ * 28636360 * 0xf.15f17f0/4 = 108 MHz
+ * 432 MHz pre-postdivide
+ */
- /* AUX_PLL_FRAC */
- cx25840_write4(client, 0x110, 0x00ec6bd6);
- }
+ /*
+ * AUX_PLL Fraction = 0x0ec6bd6
+ * 28636363 * 0x9.7635eb0/0x10 = 44100 * 384
+ * 271 MHz pre-postdivide
+ * FIXME 28636363 ref_freq doesn't match VID PLL ref
+ */
+ cx25840_write4(client, 0x110, 0x00ec6bd6);
- if (state->is_cx25836)
+ /*
+ * SA_MCLK_SEL = 1
+ * SA_MCLK_DIV = 0x10 = 384/384 * AUX_PLL post dvivider
+ */
+ cx25840_write(client, 0x127, 0x50);
+
+ if (is_cx2583x(state))
break;
- /* src3/4/6_ctl = 0x08016d59 */
+ /* src3/4/6_ctl */
+ /* 0x1.6d59 = (4 * 28636360/8 * 2/455) / 44100 */
cx25840_write4(client, 0x900, 0x08016d59);
cx25840_write4(client, 0x904, 0x08016d59);
cx25840_write4(client, 0x90c, 0x08016d59);
break;
case 48000:
- if (state->is_cx23885) {
- /* We don't have register values
- * so avoid destroying registers. */
- break;
- }
+ /*
+ * VID_PLL Integer = 0x0f, VID_PLL Post Divider = 0x04
+ * AUX_PLL Integer = 0x0a, AUX PLL Post Divider = 0x10
+ */
+ cx25840_write4(client, 0x108, 0x100a040f);
- if (!state->is_cx231xx) {
- /* VID_PLL and AUX_PLL */
- cx25840_write4(client, 0x108, 0x100a040f);
+ /*
+ * VID_PLL Fraction (register 0x10c) = 0x2be2fe
+ * 28636360 * 0xf.15f17f0/4 = 108 MHz
+ * 432 MHz pre-postdivide
+ */
- /* AUX_PLL_FRAC */
- cx25840_write4(client, 0x110, 0x0098d6e5);
- }
+ /*
+ * AUX_PLL Fraction = 0x098d6e5
+ * 28636363 * 0xa.4c6b728/0x10 = 48000 * 384
+ * 295 MHz pre-postdivide
+ * FIXME 28636363 ref_freq doesn't match VID PLL ref
+ */
+ cx25840_write4(client, 0x110, 0x0098d6e5);
- if (state->is_cx25836)
+ /*
+ * SA_MCLK_SEL = 1
+ * SA_MCLK_DIV = 0x10 = 384/384 * AUX_PLL post dvivider
+ */
+ cx25840_write(client, 0x127, 0x50);
+
+ if (is_cx2583x(state))
break;
- /* src3/4/6_ctl = 0x08014faa */
+ /* src3/4/6_ctl */
+ /* 0x1.4faa = (4 * 28636360/8 * 2/455) / 48000 */
cx25840_write4(client, 0x900, 0x08014faa);
cx25840_write4(client, 0x904, 0x08014faa);
cx25840_write4(client, 0x90c, 0x08014faa);
@@ -112,91 +162,126 @@
} else {
switch (freq) {
case 32000:
- if (state->is_cx23885) {
- /* We don't have register values
- * so avoid destroying registers. */
- break;
- }
+ /*
+ * VID_PLL Integer = 0x0f, VID_PLL Post Divider = 0x04
+ * AUX_PLL Integer = 0x08, AUX PLL Post Divider = 0x1e
+ */
+ cx25840_write4(client, 0x108, 0x1e08040f);
- if (!state->is_cx231xx) {
- /* VID_PLL and AUX_PLL */
- cx25840_write4(client, 0x108, 0x1e08040f);
+ /*
+ * VID_PLL Fraction (register 0x10c) = 0x2be2fe
+ * 28636360 * 0xf.15f17f0/4 = 108 MHz
+ * 432 MHz pre-postdivide
+ */
- /* AUX_PLL_FRAC */
- cx25840_write4(client, 0x110, 0x012a0869);
- }
+ /*
+ * AUX_PLL Fraction = 0x12a0869
+ * 28636363 * 0x8.9504348/0x1e = 32000 * 256
+ * 246 MHz pre-postdivide
+ * FIXME 28636363 ref_freq doesn't match VID PLL ref
+ */
+ cx25840_write4(client, 0x110, 0x012a0869);
- if (state->is_cx25836)
+ /*
+ * SA_MCLK_SEL = 1
+ * SA_MCLK_DIV = 0x14 = 256/384 * AUX_PLL post dvivider
+ */
+ cx25840_write(client, 0x127, 0x54);
+
+ if (is_cx2583x(state))
break;
- /* src1_ctl = 0x08010000 */
+ /* src1_ctl */
+ /* 0x1.0000 = 32000/32000 */
cx25840_write4(client, 0x8f8, 0x08010000);
- /* src3/4/6_ctl = 0x08020000 */
+ /* src3/4/6_ctl */
+ /* 0x2.0000 = 2 * (32000/32000) */
cx25840_write4(client, 0x900, 0x08020000);
cx25840_write4(client, 0x904, 0x08020000);
cx25840_write4(client, 0x90c, 0x08020000);
-
- /* SA_MCLK_SEL=1, SA_MCLK_DIV=0x14 */
- cx25840_write(client, 0x127, 0x54);
break;
case 44100:
- if (state->is_cx23885) {
- /* We don't have register values
- * so avoid destroying registers. */
- break;
- }
+ /*
+ * VID_PLL Integer = 0x0f, VID_PLL Post Divider = 0x04
+ * AUX_PLL Integer = 0x09, AUX PLL Post Divider = 0x18
+ */
+ cx25840_write4(client, 0x108, 0x1809040f);
+ /*
+ * VID_PLL Fraction (register 0x10c) = 0x2be2fe
+ * 28636360 * 0xf.15f17f0/4 = 108 MHz
+ * 432 MHz pre-postdivide
+ */
- if (!state->is_cx231xx) {
- /* VID_PLL and AUX_PLL */
- cx25840_write4(client, 0x108, 0x1809040f);
+ /*
+ * AUX_PLL Fraction = 0x0ec6bd6
+ * 28636363 * 0x9.7635eb0/0x18 = 44100 * 256
+ * 271 MHz pre-postdivide
+ * FIXME 28636363 ref_freq doesn't match VID PLL ref
+ */
+ cx25840_write4(client, 0x110, 0x00ec6bd6);
- /* AUX_PLL_FRAC */
- cx25840_write4(client, 0x110, 0x00ec6bd6);
- }
+ /*
+ * SA_MCLK_SEL = 1
+ * SA_MCLK_DIV = 0x10 = 256/384 * AUX_PLL post dvivider
+ */
+ cx25840_write(client, 0x127, 0x50);
- if (state->is_cx25836)
+ if (is_cx2583x(state))
break;
- /* src1_ctl = 0x08010000 */
+ /* src1_ctl */
+ /* 0x1.60cd = 44100/32000 */
cx25840_write4(client, 0x8f8, 0x080160cd);
- /* src3/4/6_ctl = 0x08020000 */
+ /* src3/4/6_ctl */
+ /* 0x1.7385 = 2 * (32000/44100) */
cx25840_write4(client, 0x900, 0x08017385);
cx25840_write4(client, 0x904, 0x08017385);
cx25840_write4(client, 0x90c, 0x08017385);
break;
case 48000:
- if (!state->is_cx23885 && !state->is_cx231xx) {
- /* VID_PLL and AUX_PLL */
- cx25840_write4(client, 0x108, 0x180a040f);
+ /*
+ * VID_PLL Integer = 0x0f, VID_PLL Post Divider = 0x04
+ * AUX_PLL Integer = 0x0a, AUX PLL Post Divider = 0x18
+ */
+ cx25840_write4(client, 0x108, 0x180a040f);
- /* AUX_PLL_FRAC */
- cx25840_write4(client, 0x110, 0x0098d6e5);
- }
+ /*
+ * VID_PLL Fraction (register 0x10c) = 0x2be2fe
+ * 28636360 * 0xf.15f17f0/4 = 108 MHz
+ * 432 MHz pre-postdivide
+ */
- if (state->is_cx25836)
+ /*
+ * AUX_PLL Fraction = 0x098d6e5
+ * 28636363 * 0xa.4c6b728/0x18 = 48000 * 256
+ * 295 MHz pre-postdivide
+ * FIXME 28636363 ref_freq doesn't match VID PLL ref
+ */
+ cx25840_write4(client, 0x110, 0x0098d6e5);
+
+ /*
+ * SA_MCLK_SEL = 1
+ * SA_MCLK_DIV = 0x10 = 256/384 * AUX_PLL post dvivider
+ */
+ cx25840_write(client, 0x127, 0x50);
+
+ if (is_cx2583x(state))
break;
- if (!state->is_cx23885 && !state->is_cx231xx) {
- /* src1_ctl */
- cx25840_write4(client, 0x8f8, 0x08018000);
+ /* src1_ctl */
+ /* 0x1.8000 = 48000/32000 */
+ cx25840_write4(client, 0x8f8, 0x08018000);
- /* src3/4/6_ctl */
- cx25840_write4(client, 0x900, 0x08015555);
- cx25840_write4(client, 0x904, 0x08015555);
- cx25840_write4(client, 0x90c, 0x08015555);
- } else {
-
- cx25840_write4(client, 0x8f8, 0x0801867c);
-
- cx25840_write4(client, 0x900, 0x08014faa);
- cx25840_write4(client, 0x904, 0x08014faa);
- cx25840_write4(client, 0x90c, 0x08014faa);
- }
+ /* src3/4/6_ctl */
+ /* 0x1.5555 = 2 * (32000/48000) */
+ cx25840_write4(client, 0x900, 0x08015555);
+ cx25840_write4(client, 0x904, 0x08015555);
+ cx25840_write4(client, 0x90c, 0x08015555);
break;
}
}
@@ -206,6 +291,148 @@
return 0;
}
+static inline int cx25836_set_audclk_freq(struct i2c_client *client, u32 freq)
+{
+ return cx25840_set_audclk_freq(client, freq);
+}
+
+static int cx23885_set_audclk_freq(struct i2c_client *client, u32 freq)
+{
+ struct cx25840_state *state = to_state(i2c_get_clientdata(client));
+
+ if (state->aud_input != CX25840_AUDIO_SERIAL) {
+ switch (freq) {
+ case 32000:
+ case 44100:
+ case 48000:
+ /* We don't have register values
+ * so avoid destroying registers. */
+ /* FIXME return -EINVAL; */
+ break;
+ }
+ } else {
+ switch (freq) {
+ case 32000:
+ case 44100:
+ /* We don't have register values
+ * so avoid destroying registers. */
+ /* FIXME return -EINVAL; */
+ break;
+
+ case 48000:
+ /* src1_ctl */
+ /* 0x1.867c = 48000 / (2 * 28636360/8 * 2/455) */
+ cx25840_write4(client, 0x8f8, 0x0801867c);
+
+ /* src3/4/6_ctl */
+ /* 0x1.4faa = (4 * 28636360/8 * 2/455) / 48000 */
+ cx25840_write4(client, 0x900, 0x08014faa);
+ cx25840_write4(client, 0x904, 0x08014faa);
+ cx25840_write4(client, 0x90c, 0x08014faa);
+ break;
+ }
+ }
+
+ state->audclk_freq = freq;
+
+ return 0;
+}
+
+static int cx231xx_set_audclk_freq(struct i2c_client *client, u32 freq)
+{
+ struct cx25840_state *state = to_state(i2c_get_clientdata(client));
+
+ if (state->aud_input != CX25840_AUDIO_SERIAL) {
+ switch (freq) {
+ case 32000:
+ /* src3/4/6_ctl */
+ /* 0x1.f77f = (4 * 28636360/8 * 2/455) / 32000 */
+ cx25840_write4(client, 0x900, 0x0801f77f);
+ cx25840_write4(client, 0x904, 0x0801f77f);
+ cx25840_write4(client, 0x90c, 0x0801f77f);
+ break;
+
+ case 44100:
+ /* src3/4/6_ctl */
+ /* 0x1.6d59 = (4 * 28636360/8 * 2/455) / 44100 */
+ cx25840_write4(client, 0x900, 0x08016d59);
+ cx25840_write4(client, 0x904, 0x08016d59);
+ cx25840_write4(client, 0x90c, 0x08016d59);
+ break;
+
+ case 48000:
+ /* src3/4/6_ctl */
+ /* 0x1.4faa = (4 * 28636360/8 * 2/455) / 48000 */
+ cx25840_write4(client, 0x900, 0x08014faa);
+ cx25840_write4(client, 0x904, 0x08014faa);
+ cx25840_write4(client, 0x90c, 0x08014faa);
+ break;
+ }
+ } else {
+ switch (freq) {
+ /* FIXME These cases make different assumptions about audclk */
+ case 32000:
+ /* src1_ctl */
+ /* 0x1.0000 = 32000/32000 */
+ cx25840_write4(client, 0x8f8, 0x08010000);
+
+ /* src3/4/6_ctl */
+ /* 0x2.0000 = 2 * (32000/32000) */
+ cx25840_write4(client, 0x900, 0x08020000);
+ cx25840_write4(client, 0x904, 0x08020000);
+ cx25840_write4(client, 0x90c, 0x08020000);
+ break;
+
+ case 44100:
+ /* src1_ctl */
+ /* 0x1.60cd = 44100/32000 */
+ cx25840_write4(client, 0x8f8, 0x080160cd);
+
+ /* src3/4/6_ctl */
+ /* 0x1.7385 = 2 * (32000/44100) */
+ cx25840_write4(client, 0x900, 0x08017385);
+ cx25840_write4(client, 0x904, 0x08017385);
+ cx25840_write4(client, 0x90c, 0x08017385);
+ break;
+
+ case 48000:
+ /* src1_ctl */
+ /* 0x1.867c = 48000 / (2 * 28636360/8 * 2/455) */
+ cx25840_write4(client, 0x8f8, 0x0801867c);
+
+ /* src3/4/6_ctl */
+ /* 0x1.4faa = (4 * 28636360/8 * 2/455) / 48000 */
+ cx25840_write4(client, 0x900, 0x08014faa);
+ cx25840_write4(client, 0x904, 0x08014faa);
+ cx25840_write4(client, 0x90c, 0x08014faa);
+ break;
+ }
+ }
+
+ state->audclk_freq = freq;
+
+ return 0;
+}
+
+static int set_audclk_freq(struct i2c_client *client, u32 freq)
+{
+ struct cx25840_state *state = to_state(i2c_get_clientdata(client));
+
+ if (freq != 32000 && freq != 44100 && freq != 48000)
+ return -EINVAL;
+
+ if (is_cx231xx(state))
+ return cx231xx_set_audclk_freq(client, freq);
+
+ if (is_cx2388x(state))
+ return cx23885_set_audclk_freq(client, freq);
+
+ if (is_cx2583x(state))
+ return cx25836_set_audclk_freq(client, freq);
+
+ return cx25840_set_audclk_freq(client, freq);
+}
+
void cx25840_audio_set_path(struct i2c_client *client)
{
struct cx25840_state *state = to_state(i2c_get_clientdata(client));
@@ -243,7 +470,7 @@
cx25840_and_or(client, 0x810, ~0x1, 0x00);
/* Ensure the controller is running when we exit */
- if (state->is_cx23885 || state->is_cx231xx)
+ if (is_cx2388x(state) || is_cx231xx(state))
cx25840_and_or(client, 0x803, ~0x10, 0x10);
}
@@ -383,7 +610,7 @@
struct cx25840_state *state = to_state(sd);
int retval;
- if (!state->is_cx25836)
+ if (!is_cx2583x(state))
cx25840_and_or(client, 0x810, ~0x1, 1);
if (state->aud_input != CX25840_AUDIO_SERIAL) {
cx25840_and_or(client, 0x803, ~0x10, 0);
@@ -392,7 +619,7 @@
retval = set_audclk_freq(client, freq);
if (state->aud_input != CX25840_AUDIO_SERIAL)
cx25840_and_or(client, 0x803, ~0x10, 0x10);
- if (!state->is_cx25836)
+ if (!is_cx2583x(state))
cx25840_and_or(client, 0x810, ~0x1, 0);
return retval;
}
diff --git a/drivers/media/video/cx25840/cx25840-core.c b/drivers/media/video/cx25840/cx25840-core.c
index 1aeaf18..385ecd5 100644
--- a/drivers/media/video/cx25840/cx25840-core.c
+++ b/drivers/media/video/cx25840/cx25840-core.c
@@ -259,6 +259,13 @@
struct cx25840_state *state = to_state(i2c_get_clientdata(client));
struct workqueue_struct *q;
+ /*
+ * Come out of digital power down
+ * The CX23888, at least, needs this, otherwise registers aside from
+ * 0x0-0x2 can't be read or written.
+ */
+ cx25840_write(client, 0x000, 0);
+
/* Internal Reset */
cx25840_and_or(client, 0x102, ~0x01, 0x01);
cx25840_and_or(client, 0x102, ~0x01, 0x00);
@@ -269,18 +276,45 @@
/* DIF in reset? */
cx25840_write(client, 0x398, 0);
- /* Trust the default xtal, no division */
- /* This changes for the cx23888 products */
+ /*
+ * Trust the default xtal, no division
+ * '885: 28.636363... MHz
+ * '887: 25.000000 MHz
+ * '888: 50.000000 MHz
+ */
cx25840_write(client, 0x2, 0x76);
- /* Bring down the regulator for AUX clk */
+ /* Power up all the PLL's and DLL */
cx25840_write(client, 0x1, 0x40);
- /* Sys PLL frac */
- cx25840_write4(client, 0x11c, 0x01d1744c);
-
- /* Sys PLL int */
- cx25840_write4(client, 0x118, 0x00000416);
+ /* Sys PLL */
+ switch (state->id) {
+ case V4L2_IDENT_CX23888_AV:
+ /*
+ * 50.0 MHz * (0xb + 0xe8ba26/0x2000000)/4 = 5 * 28.636363 MHz
+ * 572.73 MHz before post divide
+ */
+ cx25840_write4(client, 0x11c, 0x00e8ba26);
+ cx25840_write4(client, 0x118, 0x0000040b);
+ break;
+ case V4L2_IDENT_CX23887_AV:
+ /*
+ * 25.0 MHz * (0x16 + 0x1d1744c/0x2000000)/4 = 5 * 28.636363 MHz
+ * 572.73 MHz before post divide
+ */
+ cx25840_write4(client, 0x11c, 0x01d1744c);
+ cx25840_write4(client, 0x118, 0x00000416);
+ break;
+ case V4L2_IDENT_CX23885_AV:
+ default:
+ /*
+ * 28.636363 MHz * (0x14 + 0x0/0x2000000)/4 = 5 * 28.636363 MHz
+ * 572.73 MHz before post divide
+ */
+ cx25840_write4(client, 0x11c, 0x00000000);
+ cx25840_write4(client, 0x118, 0x00000414);
+ break;
+ }
/* Disable DIF bypass */
cx25840_write4(client, 0x33c, 0x00000001);
@@ -288,11 +322,15 @@
/* DIF Src phase inc */
cx25840_write4(client, 0x340, 0x0df7df83);
- /* Vid PLL frac */
- cx25840_write4(client, 0x10c, 0x01b6db7b);
-
- /* Vid PLL int */
- cx25840_write4(client, 0x108, 0x00000512);
+ /*
+ * Vid PLL
+ * Setup for a BT.656 pixel clock of 13.5 Mpixels/second
+ *
+ * 28.636363 MHz * (0xf + 0x02be2c9/0x2000000)/4 = 8 * 13.5 MHz
+ * 432.0 MHz before post divide
+ */
+ cx25840_write4(client, 0x10c, 0x002be2c9);
+ cx25840_write4(client, 0x108, 0x0000040f);
/* Luma */
cx25840_write4(client, 0x414, 0x00107d12);
@@ -300,11 +338,43 @@
/* Chroma */
cx25840_write4(client, 0x420, 0x3d008282);
- /* Aux PLL frac */
- cx25840_write4(client, 0x114, 0x017dbf48);
-
- /* Aux PLL int */
- cx25840_write4(client, 0x110, 0x000a030e);
+ /*
+ * Aux PLL
+ * Initial setup for audio sample clock:
+ * 48 ksps, 16 bits/sample, x160 multiplier = 122.88 MHz
+ * Intial I2S output/master clock(?):
+ * 48 ksps, 16 bits/sample, x16 multiplier = 12.288 MHz
+ */
+ switch (state->id) {
+ case V4L2_IDENT_CX23888_AV:
+ /*
+ * 50.0 MHz * (0x7 + 0x0bedfa4/0x2000000)/3 = 122.88 MHz
+ * 368.64 MHz before post divide
+ * 122.88 MHz / 0xa = 12.288 MHz
+ */
+ cx25840_write4(client, 0x114, 0x00bedfa4);
+ cx25840_write4(client, 0x110, 0x000a0307);
+ break;
+ case V4L2_IDENT_CX23887_AV:
+ /*
+ * 25.0 MHz * (0xe + 0x17dbf48/0x2000000)/3 = 122.88 MHz
+ * 368.64 MHz before post divide
+ * 122.88 MHz / 0xa = 12.288 MHz
+ */
+ cx25840_write4(client, 0x114, 0x017dbf48);
+ cx25840_write4(client, 0x110, 0x000a030e);
+ break;
+ case V4L2_IDENT_CX23885_AV:
+ default:
+ /*
+ * 28.636363 MHz * (0xc + 0x1bf0c9e/0x2000000)/3 = 122.88 MHz
+ * 368.64 MHz before post divide
+ * 122.88 MHz / 0xa = 12.288 MHz
+ */
+ cx25840_write4(client, 0x114, 0x01bf0c9e);
+ cx25840_write4(client, 0x110, 0x000a030c);
+ break;
+ };
/* ADC2 input select */
cx25840_write(client, 0x102, 0x10);
@@ -494,7 +564,7 @@
}
/* DEBUG: Displays configured PLL frequency */
- if (!state->is_cx231xx) {
+ if (!is_cx231xx(state)) {
pll_int = cx25840_read(client, 0x108);
pll_frac = cx25840_read4(client, 0x10c) & 0x1ffffff;
pll_post = cx25840_read(client, 0x109);
@@ -615,13 +685,30 @@
}
cx25840_write(client, 0x80b, 0x00);
} else if (std & V4L2_STD_PAL) {
- /* Follow tuner change procedure for PAL */
+ /* Autodetect audio standard and audio system */
cx25840_write(client, 0x808, 0xff);
- cx25840_write(client, 0x80b, 0x10);
+ /* Since system PAL-L is pretty much non-existant and
+ not used by any public broadcast network, force
+ 6.5 MHz carrier to be interpreted as System DK,
+ this avoids DK audio detection instability */
+ cx25840_write(client, 0x80b, 0x00);
} else if (std & V4L2_STD_SECAM) {
- /* Select autodetect for SECAM */
+ /* Autodetect audio standard and audio system */
cx25840_write(client, 0x808, 0xff);
- cx25840_write(client, 0x80b, 0x10);
+ /* If only one of SECAM-DK / SECAM-L is required, then force
+ 6.5MHz carrier, else autodetect it */
+ if ((std & V4L2_STD_SECAM_DK) &&
+ !(std & (V4L2_STD_SECAM_L | V4L2_STD_SECAM_LC))) {
+ /* 6.5 MHz carrier to be interpreted as System DK */
+ cx25840_write(client, 0x80b, 0x00);
+ } else if (!(std & V4L2_STD_SECAM_DK) &&
+ (std & (V4L2_STD_SECAM_L | V4L2_STD_SECAM_LC))) {
+ /* 6.5 MHz carrier to be interpreted as System L */
+ cx25840_write(client, 0x80b, 0x08);
+ } else {
+ /* 6.5 MHz carrier to be autodetected */
+ cx25840_write(client, 0x80b, 0x10);
+ }
}
cx25840_and_or(client, 0x810, ~0x01, 0);
@@ -633,6 +720,10 @@
struct cx25840_state *state = to_state(i2c_get_clientdata(client));
u8 is_composite = (vid_input >= CX25840_COMPOSITE1 &&
vid_input <= CX25840_COMPOSITE8);
+ u8 is_component = (vid_input & CX25840_COMPONENT_ON) ==
+ CX25840_COMPONENT_ON;
+ int luma = vid_input & 0xf0;
+ int chroma = vid_input & 0xf00;
u8 reg;
v4l_dbg(1, cx25840_debug, client,
@@ -645,18 +736,14 @@
reg = vid_input & 0xff;
if ((vid_input & CX25840_SVIDEO_ON) == CX25840_SVIDEO_ON)
is_composite = 0;
- else
+ else if ((vid_input & CX25840_COMPONENT_ON) == 0)
is_composite = 1;
v4l_dbg(1, cx25840_debug, client, "mux cfg 0x%x comp=%d\n",
reg, is_composite);
- } else
- if (is_composite) {
+ } else if (is_composite) {
reg = 0xf0 + (vid_input - CX25840_COMPOSITE1);
} else {
- int luma = vid_input & 0xf0;
- int chroma = vid_input & 0xf00;
-
if ((vid_input & ~0xff0) ||
luma < CX25840_SVIDEO_LUMA1 || luma > CX25840_SVIDEO_LUMA8 ||
chroma < CX25840_SVIDEO_CHROMA4 || chroma > CX25840_SVIDEO_CHROMA8) {
@@ -678,7 +765,7 @@
* configuration in reg (for the cx23885) so we have no
* need to attempt to flip bits for earlier av decoders.
*/
- if (!state->is_cx23885 && !state->is_cx231xx) {
+ if (!is_cx2388x(state) && !is_cx231xx(state)) {
switch (aud_input) {
case CX25840_AUDIO_SERIAL:
/* do nothing, use serial audio input */
@@ -698,10 +785,13 @@
cx25840_write(client, 0x103, reg);
- /* Set INPUT_MODE to Composite (0) or S-Video (1) */
- cx25840_and_or(client, 0x401, ~0x6, is_composite ? 0 : 0x02);
+ /* Set INPUT_MODE to Composite, S-Video or Component */
+ if (is_component)
+ cx25840_and_or(client, 0x401, ~0x6, 0x6);
+ else
+ cx25840_and_or(client, 0x401, ~0x6, is_composite ? 0 : 0x02);
- if (!state->is_cx23885 && !state->is_cx231xx) {
+ if (!is_cx2388x(state) && !is_cx231xx(state)) {
/* Set CH_SEL_ADC2 to 1 if input comes from CH3 */
cx25840_and_or(client, 0x102, ~0x2, (reg & 0x80) == 0 ? 2 : 0);
/* Set DUAL_MODE_ADC2 to 1 if input comes from both CH2&CH3 */
@@ -710,22 +800,31 @@
else
cx25840_and_or(client, 0x102, ~0x4, 0);
} else {
- if (is_composite)
+ /* Set DUAL_MODE_ADC2 to 1 if component*/
+ cx25840_and_or(client, 0x102, ~0x4, is_component ? 0x4 : 0x0);
+ if (is_composite) {
/* ADC2 input select channel 2 */
cx25840_and_or(client, 0x102, ~0x2, 0);
- else
- /* ADC2 input select channel 3 */
- cx25840_and_or(client, 0x102, ~0x2, 2);
+ } else if (!is_component) {
+ /* S-Video */
+ if (chroma >= CX25840_SVIDEO_CHROMA7) {
+ /* ADC2 input select channel 3 */
+ cx25840_and_or(client, 0x102, ~0x2, 2);
+ } else {
+ /* ADC2 input select channel 2 */
+ cx25840_and_or(client, 0x102, ~0x2, 0);
+ }
+ }
}
state->vid_input = vid_input;
state->aud_input = aud_input;
- if (!state->is_cx25836) {
+ if (!is_cx2583x(state)) {
cx25840_audio_set_path(client);
input_change(client);
}
- if (state->is_cx23885) {
+ if (is_cx2388x(state)) {
/* Audio channel 1 src : Parallel 1 */
cx25840_write(client, 0x124, 0x03);
@@ -741,7 +840,7 @@
*/
cx25840_write(client, 0x918, 0xa0);
cx25840_write(client, 0x919, 0x01);
- } else if (state->is_cx231xx) {
+ } else if (is_cx231xx(state)) {
/* Audio channel 1 src : Parallel 1 */
cx25840_write(client, 0x124, 0x03);
@@ -805,7 +904,7 @@
cx25840_and_or(client, 0x400, ~0xf, fmt);
cx25840_and_or(client, 0x403, ~0x3, pal_m);
cx25840_std_setup(client);
- if (!state->is_cx25836)
+ if (!is_cx2583x(state))
input_change(client);
return 0;
}
@@ -868,7 +967,7 @@
case V4L2_CID_AUDIO_TREBLE:
case V4L2_CID_AUDIO_BALANCE:
case V4L2_CID_AUDIO_MUTE:
- if (state->is_cx25836)
+ if (is_cx2583x(state))
return -EINVAL;
return cx25840_audio_s_ctrl(sd, ctrl);
@@ -905,7 +1004,7 @@
case V4L2_CID_AUDIO_TREBLE:
case V4L2_CID_AUDIO_BALANCE:
case V4L2_CID_AUDIO_MUTE:
- if (state->is_cx25836)
+ if (is_cx2583x(state))
return -EINVAL;
return cx25840_audio_g_ctrl(sd, ctrl);
default:
@@ -1209,11 +1308,11 @@
if (!state->is_initialized) {
/* initialize and load firmware */
state->is_initialized = 1;
- if (state->is_cx25836)
+ if (is_cx2583x(state))
cx25836_initialize(client);
- else if (state->is_cx23885)
+ else if (is_cx2388x(state))
cx23885_initialize(client);
- else if (state->is_cx231xx)
+ else if (is_cx231xx(state))
cx231xx_initialize(client);
else
cx25840_initialize(client);
@@ -1256,17 +1355,17 @@
v4l_dbg(1, cx25840_debug, client, "%s output\n",
enable ? "enable" : "disable");
if (enable) {
- if (state->is_cx23885 || state->is_cx231xx) {
+ if (is_cx2388x(state) || is_cx231xx(state)) {
u8 v = (cx25840_read(client, 0x421) | 0x0b);
cx25840_write(client, 0x421, v);
} else {
cx25840_write(client, 0x115,
- state->is_cx25836 ? 0x0c : 0x8c);
+ is_cx2583x(state) ? 0x0c : 0x8c);
cx25840_write(client, 0x116,
- state->is_cx25836 ? 0x04 : 0x07);
+ is_cx2583x(state) ? 0x04 : 0x07);
}
} else {
- if (state->is_cx23885 || state->is_cx231xx) {
+ if (is_cx2388x(state) || is_cx231xx(state)) {
u8 v = cx25840_read(client, 0x421) & ~(0x0b);
cx25840_write(client, 0x421, v);
} else {
@@ -1292,7 +1391,7 @@
default:
break;
}
- if (state->is_cx25836)
+ if (is_cx2583x(state))
return -EINVAL;
switch (qc->id) {
@@ -1346,7 +1445,7 @@
struct cx25840_state *state = to_state(sd);
struct i2c_client *client = v4l2_get_subdevdata(sd);
- if (state->is_cx25836)
+ if (is_cx2583x(state))
return -EINVAL;
return set_input(client, state->vid_input, input);
}
@@ -1356,7 +1455,7 @@
struct cx25840_state *state = to_state(sd);
struct i2c_client *client = v4l2_get_subdevdata(sd);
- if (!state->is_cx25836)
+ if (!is_cx2583x(state))
input_change(client);
return 0;
}
@@ -1373,7 +1472,7 @@
return 0;
vt->signal = vpres ? 0xffff : 0x0;
- if (state->is_cx25836)
+ if (is_cx2583x(state))
return 0;
vt->capability |=
@@ -1404,7 +1503,7 @@
struct cx25840_state *state = to_state(sd);
struct i2c_client *client = v4l2_get_subdevdata(sd);
- if (state->radio || state->is_cx25836)
+ if (state->radio || is_cx2583x(state))
return 0;
switch (vt->audmode) {
@@ -1445,11 +1544,11 @@
struct cx25840_state *state = to_state(sd);
struct i2c_client *client = v4l2_get_subdevdata(sd);
- if (state->is_cx25836)
+ if (is_cx2583x(state))
cx25836_initialize(client);
- else if (state->is_cx23885)
+ else if (is_cx2388x(state))
cx23885_initialize(client);
- else if (state->is_cx231xx)
+ else if (is_cx231xx(state))
cx231xx_initialize(client);
else
cx25840_initialize(client);
@@ -1470,7 +1569,7 @@
struct i2c_client *client = v4l2_get_subdevdata(sd);
log_video_status(client);
- if (!state->is_cx25836)
+ if (!is_cx2583x(state))
log_audio_status(client);
return 0;
}
@@ -1521,12 +1620,50 @@
/* ----------------------------------------------------------------------- */
+static u32 get_cx2388x_ident(struct i2c_client *client)
+{
+ u32 ret;
+
+ /* Come out of digital power down */
+ cx25840_write(client, 0x000, 0);
+
+ /* Detecting whether the part is cx23885/7/8 is more
+ * difficult than it needs to be. No ID register. Instead we
+ * probe certain registers indicated in the datasheets to look
+ * for specific defaults that differ between the silicon designs. */
+
+ /* It's either 885/7 if the IR Tx Clk Divider register exists */
+ if (cx25840_read4(client, 0x204) & 0xffff) {
+ /* CX23885 returns bogus repetitive byte values for the DIF,
+ * which doesn't exist for it. (Ex. 8a8a8a8a or 31313131) */
+ ret = cx25840_read4(client, 0x300);
+ if (((ret & 0xffff0000) >> 16) == (ret & 0xffff)) {
+ /* No DIF */
+ ret = V4L2_IDENT_CX23885_AV;
+ } else {
+ /* CX23887 has a broken DIF, but the registers
+ * appear valid (but unsed), good enough to detect. */
+ ret = V4L2_IDENT_CX23887_AV;
+ }
+ } else if (cx25840_read4(client, 0x300) & 0x0fffffff) {
+ /* DIF PLL Freq Word reg exists; chip must be a CX23888 */
+ ret = V4L2_IDENT_CX23888_AV;
+ } else {
+ v4l_err(client, "Unable to detect h/w, assuming cx23887\n");
+ ret = V4L2_IDENT_CX23887_AV;
+ }
+
+ /* Back into digital power down */
+ cx25840_write(client, 0x000, 2);
+ return ret;
+}
+
static int cx25840_probe(struct i2c_client *client,
const struct i2c_device_id *did)
{
struct cx25840_state *state;
struct v4l2_subdev *sd;
- u32 id;
+ u32 id = V4L2_IDENT_NONE;
u16 device_id;
/* Check if the adapter supports the needed features */
@@ -1543,17 +1680,22 @@
* 0x83 for the cx2583x and 0x84 for the cx2584x */
if ((device_id & 0xff00) == 0x8300) {
id = V4L2_IDENT_CX25836 + ((device_id >> 4) & 0xf) - 6;
- }
- else if ((device_id & 0xff00) == 0x8400) {
+ } else if ((device_id & 0xff00) == 0x8400) {
id = V4L2_IDENT_CX25840 + ((device_id >> 4) & 0xf);
} else if (device_id == 0x0000) {
- id = V4L2_IDENT_CX25836 + ((device_id >> 4) & 0xf) - 6;
- } else if (device_id == 0x1313) {
- id = V4L2_IDENT_CX25836 + ((device_id >> 4) & 0xf) - 6;
+ id = get_cx2388x_ident(client);
} else if ((device_id & 0xfff0) == 0x5A30) {
- id = V4L2_IDENT_CX25840 + ((device_id >> 4) & 0xf);
- }
- else {
+ /* The CX23100 (0x5A3C = 23100) doesn't have an A/V decoder */
+ id = V4L2_IDENT_CX2310X_AV;
+ } else if ((device_id & 0xff) == (device_id >> 8)) {
+ v4l_err(client,
+ "likely a confused/unresponsive cx2388[578] A/V decoder"
+ " found @ 0x%x (%s)\n",
+ client->addr << 1, client->adapter->name);
+ v4l_err(client, "A method to reset it from the cx25840 driver"
+ " software is not known at this time\n");
+ return -ENODEV;
+ } else {
v4l_dbg(1, cx25840_debug, client, "cx25840 not found\n");
return -ENODEV;
}
@@ -1564,17 +1706,45 @@
sd = &state->sd;
v4l2_i2c_subdev_init(sd, client, &cx25840_ops);
- /* Note: revision '(device_id & 0x0f) == 2' was never built. The
- marking skips from 0x1 == 22 to 0x3 == 23. */
- v4l_info(client, "cx25%3x-2%x found @ 0x%x (%s)\n",
- (device_id & 0xfff0) >> 4,
- (device_id & 0x0f) < 3 ? (device_id & 0x0f) + 1 : (device_id & 0x0f),
- client->addr << 1, client->adapter->name);
+ switch (id) {
+ case V4L2_IDENT_CX23885_AV:
+ v4l_info(client, "cx23885 A/V decoder found @ 0x%x (%s)\n",
+ client->addr << 1, client->adapter->name);
+ break;
+ case V4L2_IDENT_CX23887_AV:
+ v4l_info(client, "cx23887 A/V decoder found @ 0x%x (%s)\n",
+ client->addr << 1, client->adapter->name);
+ break;
+ case V4L2_IDENT_CX23888_AV:
+ v4l_info(client, "cx23888 A/V decoder found @ 0x%x (%s)\n",
+ client->addr << 1, client->adapter->name);
+ break;
+ case V4L2_IDENT_CX2310X_AV:
+ v4l_info(client, "cx%d A/V decoder found @ 0x%x (%s)\n",
+ device_id, client->addr << 1, client->adapter->name);
+ break;
+ case V4L2_IDENT_CX25840:
+ case V4L2_IDENT_CX25841:
+ case V4L2_IDENT_CX25842:
+ case V4L2_IDENT_CX25843:
+ /* Note: revision '(device_id & 0x0f) == 2' was never built. The
+ marking skips from 0x1 == 22 to 0x3 == 23. */
+ v4l_info(client, "cx25%3x-2%x found @ 0x%x (%s)\n",
+ (device_id & 0xfff0) >> 4,
+ (device_id & 0x0f) < 3 ? (device_id & 0x0f) + 1
+ : (device_id & 0x0f),
+ client->addr << 1, client->adapter->name);
+ break;
+ case V4L2_IDENT_CX25836:
+ case V4L2_IDENT_CX25837:
+ default:
+ v4l_info(client, "cx25%3x-%x found @ 0x%x (%s)\n",
+ (device_id & 0xfff0) >> 4, device_id & 0x0f,
+ client->addr << 1, client->adapter->name);
+ break;
+ }
state->c = client;
- state->is_cx25836 = ((device_id & 0xff00) == 0x8300);
- state->is_cx23885 = (device_id == 0x0000) || (device_id == 0x1313);
- state->is_cx231xx = (device_id == 0x5a3e);
state->vid_input = CX25840_COMPOSITE7;
state->aud_input = CX25840_AUDIO8;
state->audclk_freq = 48000;
diff --git a/drivers/media/video/cx25840/cx25840-core.h b/drivers/media/video/cx25840/cx25840-core.h
index 814b565..5534544 100644
--- a/drivers/media/video/cx25840/cx25840-core.h
+++ b/drivers/media/video/cx25840/cx25840-core.h
@@ -23,6 +23,7 @@
#include <linux/videodev2.h>
#include <media/v4l2-device.h>
+#include <media/v4l2-chip-ident.h>
#include <linux/i2c.h>
/* ENABLE_PVR150_WORKAROUND activates a workaround for a hardware bug that is
@@ -48,9 +49,6 @@
int vbi_line_offset;
u32 id;
u32 rev;
- int is_cx25836;
- int is_cx23885;
- int is_cx231xx;
int is_initialized;
wait_queue_head_t fw_wait; /* wake up when the fw load is finished */
struct work_struct fw_work; /* work entry for fw load */
@@ -61,6 +59,24 @@
return container_of(sd, struct cx25840_state, sd);
}
+static inline bool is_cx2583x(struct cx25840_state *state)
+{
+ return state->id == V4L2_IDENT_CX25836 ||
+ state->id == V4L2_IDENT_CX25837;
+}
+
+static inline bool is_cx231xx(struct cx25840_state *state)
+{
+ return state->id == V4L2_IDENT_CX2310X_AV;
+}
+
+static inline bool is_cx2388x(struct cx25840_state *state)
+{
+ return state->id == V4L2_IDENT_CX23885_AV ||
+ state->id == V4L2_IDENT_CX23887_AV ||
+ state->id == V4L2_IDENT_CX23888_AV;
+}
+
/* ----------------------------------------------------------------------- */
/* cx25850-core.c */
int cx25840_write(struct i2c_client *client, u16 addr, u8 value);
diff --git a/drivers/media/video/cx25840/cx25840-firmware.c b/drivers/media/video/cx25840/cx25840-firmware.c
index 1f483c1..8150200 100644
--- a/drivers/media/video/cx25840/cx25840-firmware.c
+++ b/drivers/media/video/cx25840/cx25840-firmware.c
@@ -67,9 +67,9 @@
if (firmware[0])
return firmware;
- if (state->is_cx23885)
+ if (is_cx2388x(state))
return "v4l-cx23885-avcore-01.fw";
- if (state->is_cx231xx)
+ if (is_cx231xx(state))
return "v4l-cx231xx-avcore-01.fw";
return "v4l-cx25840.fw";
}
@@ -112,13 +112,13 @@
int MAX_BUF_SIZE = FWSEND;
u32 gpio_oe = 0, gpio_da = 0;
- if (state->is_cx23885) {
+ if (is_cx2388x(state)) {
/* Preserve the GPIO OE and output bits */
gpio_oe = cx25840_read(client, 0x160);
gpio_da = cx25840_read(client, 0x164);
}
- if ((state->is_cx231xx) && MAX_BUF_SIZE > 16) {
+ if (is_cx231xx(state) && MAX_BUF_SIZE > 16) {
v4l_err(client, " Firmware download size changed to 16 bytes max length\n");
MAX_BUF_SIZE = 16; /* cx231xx cannot accept more than 16 bytes at a time */
}
@@ -156,7 +156,7 @@
size = fw->size;
release_firmware(fw);
- if (state->is_cx23885) {
+ if (is_cx2388x(state)) {
/* Restore GPIO configuration after f/w load */
cx25840_write(client, 0x160, gpio_oe);
cx25840_write(client, 0x164, gpio_da);
diff --git a/drivers/media/video/cx88/Kconfig b/drivers/media/video/cx88/Kconfig
index 4995298..c7e5851 100644
--- a/drivers/media/video/cx88/Kconfig
+++ b/drivers/media/video/cx88/Kconfig
@@ -61,6 +61,8 @@
select DVB_STV0299 if !DVB_FE_CUSTOMISE
select DVB_STV0288 if !DVB_FE_CUSTOMISE
select DVB_STB6000 if !DVB_FE_CUSTOMISE
+ select DVB_STV0900 if !DVB_FE_CUSTOMISE
+ select DVB_STB6100 if !DVB_FE_CUSTOMISE
select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMISE
---help---
This adds support for DVB/ATSC cards based on the
diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c
index 33be636..d844f2a 100644
--- a/drivers/media/video/cx88/cx88-cards.c
+++ b/drivers/media/video/cx88/cx88-cards.c
@@ -2075,6 +2075,18 @@
},
.mpeg = CX88_MPEG_DVB,
},
+ [CX88_BOARD_PROF_7301] = {
+ .name = "Prof 7301 DVB-S/S2",
+ .tuner_type = UNSET,
+ .radio_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .radio_addr = ADDR_UNSET,
+ .input = { {
+ .type = CX88_VMUX_DVB,
+ .vmux = 0,
+ } },
+ .mpeg = CX88_MPEG_DVB,
+ },
};
/* ------------------------------------------------------------------ */
@@ -2535,6 +2547,10 @@
.subvendor = 0x107d,
.subdevice = 0x6618,
.card = CX88_BOARD_WINFAST_TV2000_XP_GLOBAL,
+ }, {
+ .subvendor = 0xb034,
+ .subdevice = 0x3034,
+ .card = CX88_BOARD_PROF_7301,
},
};
@@ -3211,6 +3227,7 @@
case CX88_BOARD_TBS_8920:
case CX88_BOARD_PROF_6200:
case CX88_BOARD_PROF_7300:
+ case CX88_BOARD_PROF_7301:
case CX88_BOARD_SATTRADE_ST4200:
cx_write(MO_GP0_IO, 0x8000);
msleep(100);
@@ -3267,7 +3284,7 @@
ctl.fname);
call_all(core, tuner, s_config, &xc2028_cfg);
}
- call_all(core, tuner, s_standby);
+ call_all(core, core, s_power, 0);
}
/* ------------------------------------------------------------------ */
diff --git a/drivers/media/video/cx88/cx88-core.c b/drivers/media/video/cx88/cx88-core.c
index cf63460..b354111 100644
--- a/drivers/media/video/cx88/cx88-core.c
+++ b/drivers/media/video/cx88/cx88-core.c
@@ -624,7 +624,7 @@
/* setup image format */
cx_andor(MO_COLOR_CTRL, 0x4000, 0x4000);
- /* setup FIFO Threshholds */
+ /* setup FIFO Thresholds */
cx_write(MO_PDMA_STHRSH, 0x0807);
cx_write(MO_PDMA_DTHRSH, 0x0807);
diff --git a/drivers/media/video/cx88/cx88-dvb.c b/drivers/media/video/cx88/cx88-dvb.c
index 518bcfe..b142969 100644
--- a/drivers/media/video/cx88/cx88-dvb.c
+++ b/drivers/media/video/cx88/cx88-dvb.c
@@ -53,6 +53,9 @@
#include "stv0288.h"
#include "stb6000.h"
#include "cx24116.h"
+#include "stv0900.h"
+#include "stb6100.h"
+#include "stb6100_proc.h"
MODULE_DESCRIPTION("driver for cx2388x based DVB cards");
MODULE_AUTHOR("Chris Pascoe <c.pascoe@itee.uq.edu.au>");
@@ -573,6 +576,15 @@
return 0;
}
+static int stv0900_set_ts_param(struct dvb_frontend *fe,
+ int is_punctured)
+{
+ struct cx8802_dev *dev = fe->dvb->priv;
+ dev->ts_gen_cntrl = 0;
+
+ return 0;
+}
+
static int cx24116_reset_device(struct dvb_frontend *fe)
{
struct cx8802_dev *dev = fe->dvb->priv;
@@ -601,6 +613,23 @@
.reset_device = cx24116_reset_device,
};
+static struct stv0900_config prof_7301_stv0900_config = {
+ .demod_address = 0x6a,
+/* demod_mode = 0,*/
+ .xtal = 27000000,
+ .clkmode = 3,/* 0-CLKI, 2-XTALI, else AUTO */
+ .diseqc_mode = 2,/* 2/3 PWM */
+ .tun1_maddress = 0,/* 0x60 */
+ .tun1_adc = 0,/* 2 Vpp */
+ .path1_mode = 3,
+ .set_ts_params = stv0900_set_ts_param,
+};
+
+static struct stb6100_config prof_7301_stb6100_config = {
+ .tuner_address = 0x60,
+ .refclock = 27000000,
+};
+
static struct stv0299_config tevii_tuner_sharp_config = {
.demod_address = 0x68,
.inittab = sharp_z0194a_inittab,
@@ -1149,6 +1178,31 @@
goto frontend_detach;
}
break;
+ case CX88_BOARD_PROF_7301:{
+ struct dvb_tuner_ops *tuner_ops = NULL;
+
+ fe0->dvb.frontend = dvb_attach(stv0900_attach,
+ &prof_7301_stv0900_config,
+ &core->i2c_adap, 0);
+ if (fe0->dvb.frontend != NULL) {
+ if (!dvb_attach(stb6100_attach, fe0->dvb.frontend,
+ &prof_7301_stb6100_config,
+ &core->i2c_adap))
+ goto frontend_detach;
+
+ tuner_ops = &fe0->dvb.frontend->ops.tuner_ops;
+ tuner_ops->set_frequency = stb6100_set_freq;
+ tuner_ops->get_frequency = stb6100_get_freq;
+ tuner_ops->set_bandwidth = stb6100_set_bandw;
+ tuner_ops->get_bandwidth = stb6100_get_bandw;
+
+ core->prev_set_voltage =
+ fe0->dvb.frontend->ops.set_voltage;
+ fe0->dvb.frontend->ops.set_voltage =
+ tevii_dvbs_set_voltage;
+ }
+ break;
+ }
default:
printk(KERN_ERR "%s/2: The frontend of your DVB/ATSC card isn't supported yet\n",
core->name);
@@ -1170,11 +1224,11 @@
fe1->dvb.frontend->ops.ts_bus_ctrl = cx88_dvb_bus_ctrl;
/* Put the analog decoder in standby to keep it quiet */
- call_all(core, tuner, s_standby);
+ call_all(core, core, s_power, 0);
/* register everything */
return videobuf_dvb_register_bus(&dev->frontends, THIS_MODULE, dev,
- &dev->pci->dev, adapter_nr, mfe_shared);
+ &dev->pci->dev, adapter_nr, mfe_shared, NULL);
frontend_detach:
core->gate_ctrl = NULL;
diff --git a/drivers/media/video/cx88/cx88-input.c b/drivers/media/video/cx88/cx88-input.c
index 78b3635..92b8cdf 100644
--- a/drivers/media/video/cx88/cx88-input.c
+++ b/drivers/media/video/cx88/cx88-input.c
@@ -118,13 +118,13 @@
data = (data << 4) | ((gpio_key & 0xf0) >> 4);
- ir_input_keydown(ir->input, &ir->ir, data, data);
+ ir_input_keydown(ir->input, &ir->ir, data);
ir_input_nokey(ir->input, &ir->ir);
} else if (ir->mask_keydown) {
/* bit set on keydown */
if (gpio & ir->mask_keydown) {
- ir_input_keydown(ir->input, &ir->ir, data, data);
+ ir_input_keydown(ir->input, &ir->ir, data);
} else {
ir_input_nokey(ir->input, &ir->ir);
}
@@ -132,14 +132,14 @@
} else if (ir->mask_keyup) {
/* bit cleared on keydown */
if (0 == (gpio & ir->mask_keyup)) {
- ir_input_keydown(ir->input, &ir->ir, data, data);
+ ir_input_keydown(ir->input, &ir->ir, data);
} else {
ir_input_nokey(ir->input, &ir->ir);
}
} else {
/* can't distinguish keydown/up :-/ */
- ir_input_keydown(ir->input, &ir->ir, data, data);
+ ir_input_keydown(ir->input, &ir->ir, data);
ir_input_nokey(ir->input, &ir->ir);
}
}
@@ -303,6 +303,23 @@
ir->mask_keydown = 0x02;
ir->polling = 50; /* ms */
break;
+ case CX88_BOARD_OMICOM_SS4_PCI:
+ case CX88_BOARD_SATTRADE_ST4200:
+ case CX88_BOARD_TBS_8920:
+ case CX88_BOARD_TBS_8910:
+ case CX88_BOARD_PROF_7300:
+ case CX88_BOARD_PROF_7301:
+ case CX88_BOARD_PROF_6200:
+ ir_codes = &ir_codes_tbs_nec_table;
+ ir_type = IR_TYPE_PD;
+ ir->sampling = 0xff00; /* address */
+ break;
+ case CX88_BOARD_TEVII_S460:
+ case CX88_BOARD_TEVII_S420:
+ ir_codes = &ir_codes_tevii_nec_table;
+ ir_type = IR_TYPE_PD;
+ ir->sampling = 0xff00; /* address */
+ break;
case CX88_BOARD_DNTV_LIVE_DVB_T_PRO:
ir_codes = &ir_codes_dntv_live_dvbt_pro_table;
ir_type = IR_TYPE_PD;
@@ -343,7 +360,10 @@
snprintf(ir->name, sizeof(ir->name), "cx88 IR (%s)", core->board.name);
snprintf(ir->phys, sizeof(ir->phys), "pci-%s/ir0", pci_name(pci));
- ir_input_init(input_dev, &ir->ir, ir_type, ir_codes);
+ err = ir_input_init(input_dev, &ir->ir, ir_type, ir_codes);
+ if (err < 0)
+ goto err_out_free;
+
input_dev->name = ir->name;
input_dev->phys = ir->phys;
input_dev->id.bustype = BUS_PCI;
@@ -373,6 +393,7 @@
cx88_ir_stop(core, ir);
core->ir = NULL;
err_out_free:
+ ir_input_free(input_dev);
input_free_device(input_dev);
kfree(ir);
return err;
@@ -387,6 +408,7 @@
return 0;
cx88_ir_stop(core, ir);
+ ir_input_free(ir->input);
input_unregister_device(ir->input);
kfree(ir);
@@ -432,8 +454,17 @@
/* decode it */
switch (core->boardnr) {
+ case CX88_BOARD_TEVII_S460:
+ case CX88_BOARD_TEVII_S420:
case CX88_BOARD_TERRATEC_CINERGY_1400_DVB_T1:
case CX88_BOARD_DNTV_LIVE_DVB_T_PRO:
+ case CX88_BOARD_OMICOM_SS4_PCI:
+ case CX88_BOARD_SATTRADE_ST4200:
+ case CX88_BOARD_TBS_8920:
+ case CX88_BOARD_TBS_8910:
+ case CX88_BOARD_PROF_7300:
+ case CX88_BOARD_PROF_7301:
+ case CX88_BOARD_PROF_6200:
ircode = ir_decode_pulsedistance(ir->samples, ir->scount, 1, 4);
if (ircode == 0xffffffff) { /* decoding error */
@@ -461,7 +492,7 @@
ir_dprintk("Key Code: %x\n", (ircode >> 16) & 0x7f);
- ir_input_keydown(ir->input, &ir->ir, (ircode >> 16) & 0x7f, (ircode >> 16) & 0xff);
+ ir_input_keydown(ir->input, &ir->ir, (ircode >> 16) & 0x7f);
ir->release = jiffies + msecs_to_jiffies(120);
break;
case CX88_BOARD_HAUPPAUGE:
@@ -498,7 +529,7 @@
if ( dev != 0x1e && dev != 0x1f )
/* not a hauppauge remote */
break;
- ir_input_keydown(ir->input, &ir->ir, code, ircode);
+ ir_input_keydown(ir->input, &ir->ir, code);
ir->release = jiffies + msecs_to_jiffies(120);
break;
case CX88_BOARD_PINNACLE_PCTV_HD_800i:
@@ -506,7 +537,7 @@
ir_dprintk("biphase decoded: %x\n", ircode);
if ((ircode & 0xfffff000) != 0x3000)
break;
- ir_input_keydown(ir->input, &ir->ir, ircode & 0x3f, ircode);
+ ir_input_keydown(ir->input, &ir->ir, ircode & 0x3f);
ir->release = jiffies + msecs_to_jiffies(120);
break;
}
diff --git a/drivers/media/video/cx88/cx88-video.c b/drivers/media/video/cx88/cx88-video.c
index 57e6b12..d7e8fce 100644
--- a/drivers/media/video/cx88/cx88-video.c
+++ b/drivers/media/video/cx88/cx88-video.c
@@ -935,7 +935,7 @@
mutex_lock(&dev->core->lock);
if(atomic_dec_and_test(&dev->core->users))
- call_all(dev->core, tuner, s_standby);
+ call_all(dev->core, core, s_power, 0);
mutex_unlock(&dev->core->lock);
return 0;
diff --git a/drivers/media/video/cx88/cx88.h b/drivers/media/video/cx88/cx88.h
index d5cea41..e1c5217 100644
--- a/drivers/media/video/cx88/cx88.h
+++ b/drivers/media/video/cx88/cx88.h
@@ -238,6 +238,7 @@
#define CX88_BOARD_HAUPPAUGE_IRONLY 80
#define CX88_BOARD_WINFAST_DTV1800H 81
#define CX88_BOARD_WINFAST_DTV2000H_J 82
+#define CX88_BOARD_PROF_7301 83
enum cx88_itype {
CX88_VMUX_COMPOSITE1 = 1,
diff --git a/drivers/media/video/davinci/dm355_ccdc.c b/drivers/media/video/davinci/dm355_ccdc.c
index 4629cab..3143900 100644
--- a/drivers/media/video/davinci/dm355_ccdc.c
+++ b/drivers/media/video/davinci/dm355_ccdc.c
@@ -285,7 +285,7 @@
if ((ccdcparam->med_filt_thres < 0) ||
(ccdcparam->med_filt_thres > CCDC_MED_FILT_THRESH)) {
- dev_dbg(dev, "Invalid value of median filter thresold\n");
+ dev_dbg(dev, "Invalid value of median filter threshold\n");
return -EINVAL;
}
@@ -959,7 +959,7 @@
},
};
-static int dm355_ccdc_init(void)
+static int __init dm355_ccdc_init(void)
{
printk(KERN_NOTICE "dm355_ccdc_init\n");
if (vpfe_register_ccdc_device(&ccdc_hw_dev) < 0)
@@ -969,7 +969,7 @@
return 0;
}
-static void dm355_ccdc_exit(void)
+static void __exit dm355_ccdc_exit(void)
{
vpfe_unregister_ccdc_device(&ccdc_hw_dev);
}
diff --git a/drivers/media/video/davinci/dm644x_ccdc.c b/drivers/media/video/davinci/dm644x_ccdc.c
index 2f19a91..d5fa193 100644
--- a/drivers/media/video/davinci/dm644x_ccdc.c
+++ b/drivers/media/video/davinci/dm644x_ccdc.c
@@ -859,7 +859,7 @@
},
};
-static int dm644x_ccdc_init(void)
+static int __init dm644x_ccdc_init(void)
{
printk(KERN_NOTICE "dm644x_ccdc_init\n");
if (vpfe_register_ccdc_device(&ccdc_hw_dev) < 0)
@@ -869,7 +869,7 @@
return 0;
}
-static void dm644x_ccdc_exit(void)
+static void __exit dm644x_ccdc_exit(void)
{
vpfe_unregister_ccdc_device(&ccdc_hw_dev);
}
diff --git a/drivers/media/video/davinci/vpfe_capture.c b/drivers/media/video/davinci/vpfe_capture.c
index 402ce43..12a1b3d 100644
--- a/drivers/media/video/davinci/vpfe_capture.c
+++ b/drivers/media/video/davinci/vpfe_capture.c
@@ -660,7 +660,7 @@
frame_format = ccdc_dev->hw_ops.get_frame_format();
if (frame_format == CCDC_FRMFMT_PROGRESSIVE)
- free_irq(IRQ_VDINT1, vpfe_dev);
+ free_irq(vpfe_dev->ccdc_irq1, vpfe_dev);
}
static int vpfe_attach_irq(struct vpfe_device *vpfe_dev)
@@ -1338,7 +1338,7 @@
vpfe_dev->memory = req_buf->memory;
videobuf_queue_dma_contig_init(&vpfe_dev->buffer_queue,
&vpfe_videobuf_qops,
- NULL,
+ vpfe_dev->pdev,
&vpfe_dev->irqlock,
req_buf->type,
vpfe_dev->fmt.fmt.pix.field,
@@ -1413,6 +1413,41 @@
buf, file->f_flags & O_NONBLOCK);
}
+static int vpfe_queryctrl(struct file *file, void *priv,
+ struct v4l2_queryctrl *qctrl)
+{
+ struct vpfe_device *vpfe_dev = video_drvdata(file);
+ struct vpfe_subdev_info *sdinfo;
+
+ sdinfo = vpfe_dev->current_subdev;
+
+ return v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, sdinfo->grp_id,
+ core, queryctrl, qctrl);
+
+}
+
+static int vpfe_g_ctrl(struct file *file, void *priv, struct v4l2_control *ctrl)
+{
+ struct vpfe_device *vpfe_dev = video_drvdata(file);
+ struct vpfe_subdev_info *sdinfo;
+
+ sdinfo = vpfe_dev->current_subdev;
+
+ return v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, sdinfo->grp_id,
+ core, g_ctrl, ctrl);
+}
+
+static int vpfe_s_ctrl(struct file *file, void *priv, struct v4l2_control *ctrl)
+{
+ struct vpfe_device *vpfe_dev = video_drvdata(file);
+ struct vpfe_subdev_info *sdinfo;
+
+ sdinfo = vpfe_dev->current_subdev;
+
+ return v4l2_device_call_until_err(&vpfe_dev->v4l2_dev, sdinfo->grp_id,
+ core, s_ctrl, ctrl);
+}
+
/*
* vpfe_calculate_offsets : This function calculates buffers offset
* for top and bottom field
@@ -1577,7 +1612,7 @@
v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_cropcap\n");
- if (vpfe_dev->std_index > ARRAY_SIZE(vpfe_standards))
+ if (vpfe_dev->std_index >= ARRAY_SIZE(vpfe_standards))
return -EINVAL;
memset(crop, 0, sizeof(struct v4l2_cropcap));
@@ -1710,6 +1745,9 @@
.vidioc_querystd = vpfe_querystd,
.vidioc_s_std = vpfe_s_std,
.vidioc_g_std = vpfe_g_std,
+ .vidioc_queryctrl = vpfe_queryctrl,
+ .vidioc_g_ctrl = vpfe_g_ctrl,
+ .vidioc_s_ctrl = vpfe_s_ctrl,
.vidioc_reqbufs = vpfe_reqbufs,
.vidioc_querybuf = vpfe_querybuf,
.vidioc_qbuf = vpfe_qbuf,
@@ -1978,8 +2016,7 @@
platform_set_drvdata(pdev, vpfe_dev);
/* set driver private data */
video_set_drvdata(vpfe_dev->video_dev, vpfe_dev);
- i2c_adap = i2c_get_adapter(1);
- vpfe_cfg = pdev->dev.platform_data;
+ i2c_adap = i2c_get_adapter(vpfe_cfg->i2c_adapter_id);
num_subdevs = vpfe_cfg->num_subdevs;
vpfe_dev->sd = kmalloc(sizeof(struct v4l2_subdev *) * num_subdevs,
GFP_KERNEL);
diff --git a/drivers/media/video/davinci/vpss.c b/drivers/media/video/davinci/vpss.c
index 6d709ca..453236b 100644
--- a/drivers/media/video/davinci/vpss.c
+++ b/drivers/media/video/davinci/vpss.c
@@ -53,7 +53,7 @@
int (*enable_clock)(enum vpss_clock_sel clock_sel, int en);
/* select input to ccdc */
void (*select_ccdc_source)(enum vpss_ccdc_source_sel src_sel);
- /* clear wbl overlflow bit */
+ /* clear wbl overflow bit */
int (*clear_wbl_overflow)(enum vpss_wbl_sel wbl_sel);
};
diff --git a/drivers/media/video/em28xx/em28xx-audio.c b/drivers/media/video/em28xx/em28xx-audio.c
index ac947ae..bd78338 100644
--- a/drivers/media/video/em28xx/em28xx-audio.c
+++ b/drivers/media/video/em28xx/em28xx-audio.c
@@ -293,7 +293,7 @@
dprintk("opening device and trying to acquire exclusive lock\n");
if (!dev) {
- printk(KERN_ERR "BUG: em28xx can't find device struct."
+ em28xx_err("BUG: em28xx can't find device struct."
" Can't proceed with open\n");
return -ENODEV;
}
@@ -325,7 +325,7 @@
return 0;
err:
- printk(KERN_ERR "Error while configuring em28xx mixer\n");
+ em28xx_err("Error while configuring em28xx mixer\n");
return ret;
}
diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c
index c0fd5c6..82da205 100644
--- a/drivers/media/video/em28xx/em28xx-cards.c
+++ b/drivers/media/video/em28xx/em28xx-cards.c
@@ -225,6 +225,14 @@
{ -1, -1, -1, -1},
};
+static struct em28xx_reg_seq vc211a_enable[] = {
+ {EM28XX_R08_GPIO, 0xff, 0x07, 10},
+ {EM28XX_R08_GPIO, 0xff, 0x0f, 10},
+ {EM28XX_R08_GPIO, 0xff, 0x0b, 10},
+ { -1, -1, -1, -1},
+};
+
+
/*
* Board definitions
*/
@@ -829,7 +837,7 @@
.mts_firmware = 1,
.has_dvb = 1,
.dvb_gpio = hauppauge_wintv_hvr_900_digital,
- .ir_codes = &ir_codes_hauppauge_new_table,
+ .ir_codes = &ir_codes_rc5_hauppauge_new_table,
.decoder = EM28XX_TVP5150,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
@@ -1009,6 +1017,23 @@
.amux = EM28XX_AMUX_LINE_IN,
} },
},
+ [EM2800_BOARD_VC211A] = {
+ .name = "Actionmaster/LinXcel/Digitus VC211A",
+ .is_em2800 = 1,
+ .tuner_type = TUNER_ABSENT, /* Capture-only board */
+ .decoder = EM28XX_SAA711X,
+ .input = { {
+ .type = EM28XX_VMUX_COMPOSITE1,
+ .vmux = SAA7115_COMPOSITE0,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = vc211a_enable,
+ }, {
+ .type = EM28XX_VMUX_SVIDEO,
+ .vmux = SAA7115_SVIDEO3,
+ .amux = EM28XX_AMUX_LINE_IN,
+ .gpio = vc211a_enable,
+ } },
+ },
[EM2800_BOARD_LEADTEK_WINFAST_USBII] = {
.name = "Leadtek Winfast USB II",
.is_em2800 = 1,
@@ -1381,10 +1406,14 @@
},
[EM2882_BOARD_TERRATEC_HYBRID_XS] = {
.name = "Terratec Hybrid XS (em2882)",
- .valid = EM28XX_BOARD_NOT_VALIDATED,
.tuner_type = TUNER_XC2028,
.tuner_gpio = default_tuner_gpio,
+ .mts_firmware = 1,
.decoder = EM28XX_TVP5150,
+ .has_dvb = 1,
+ .dvb_gpio = hauppauge_wintv_hvr_900_digital,
+ .ir_codes = &ir_codes_terratec_cinergy_xs_table,
+ .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
.vmux = TVP5150_COMPOSITE0,
@@ -1608,6 +1637,8 @@
.driver_info = EM2820_BOARD_UNKNOWN },
{ USB_DEVICE(0xeb1a, 0x2861),
.driver_info = EM2820_BOARD_UNKNOWN },
+ { USB_DEVICE(0xeb1a, 0x2862),
+ .driver_info = EM2820_BOARD_UNKNOWN },
{ USB_DEVICE(0xeb1a, 0x2870),
.driver_info = EM2820_BOARD_UNKNOWN },
{ USB_DEVICE(0xeb1a, 0x2881),
@@ -2050,6 +2081,7 @@
switch (dev->model) {
case EM2880_BOARD_EMPIRE_DUAL_TV:
case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
+ case EM2882_BOARD_TERRATEC_HYBRID_XS:
ctl->demod = XC3028_FE_ZARLINK456;
break;
case EM2880_BOARD_TERRATEC_HYBRID_XS:
@@ -2227,6 +2259,7 @@
/* ----------------------------------------------------------------------- */
void em28xx_register_i2c_ir(struct em28xx *dev)
{
+ struct i2c_board_info info;
const unsigned short addr_list[] = {
0x30, 0x47, I2C_CLIENT_END
};
@@ -2234,9 +2267,9 @@
if (disable_ir)
return;
- memset(&dev->info, 0, sizeof(&dev->info));
+ memset(&info, 0, sizeof(struct i2c_board_info));
memset(&dev->init_data, 0, sizeof(dev->init_data));
- strlcpy(dev->info.type, "ir_video", I2C_NAME_SIZE);
+ strlcpy(info.type, "ir_video", I2C_NAME_SIZE);
/* detect & configure */
switch (dev->model) {
@@ -2259,8 +2292,8 @@
}
if (dev->init_data.name)
- dev->info.platform_data = &dev->init_data;
- i2c_new_probed_device(&dev->i2c_adap, &dev->info, addr_list);
+ info.platform_data = &dev->init_data;
+ i2c_new_probed_device(&dev->i2c_adap, &info, addr_list);
}
void em28xx_card_setup(struct em28xx *dev)
@@ -2524,6 +2557,9 @@
dev->chip_id = retval;
switch (dev->chip_id) {
+ case CHIP_ID_EM2800:
+ em28xx_info("chip ID is em2800\n");
+ break;
case CHIP_ID_EM2710:
em28xx_info("chip ID is em2710\n");
break;
@@ -2650,7 +2686,7 @@
em28xx_init_extension(dev);
/* Save some power by putting tuner to sleep */
- v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_standby);
+ v4l2_device_call_all(&dev->v4l2_dev, 0, core, s_power, 0);
return 0;
diff --git a/drivers/media/video/em28xx/em28xx-core.c b/drivers/media/video/em28xx/em28xx-core.c
index a88257a..3f86d36 100644
--- a/drivers/media/video/em28xx/em28xx-core.c
+++ b/drivers/media/video/em28xx/em28xx-core.c
@@ -50,7 +50,7 @@
printk(KERN_INFO "%s %s :"fmt, \
dev->name, __func__ , ##arg); } while (0)
-static int alt = EM28XX_PINOUT;
+static int alt;
module_param(alt, int, 0644);
MODULE_PARM_DESC(alt, "alternate setting to use for video endpoint");
@@ -533,8 +533,15 @@
vid1 = em28xx_read_ac97(dev, AC97_VENDOR_ID1);
if (vid1 < 0) {
- /* Device likely doesn't support AC97 */
+ /*
+ * Device likely doesn't support AC97
+ * Note: (some) em2800 devices without eeprom reports 0x91 on
+ * CHIPCFG register, even not having an AC97 chip
+ */
em28xx_warn("AC97 chip type couldn't be determined\n");
+ dev->audio_mode.ac97 = EM28XX_NO_AC97;
+ dev->has_alsa_audio = 0;
+ dev->audio_mode.has_audio = 0;
goto init_audio;
}
@@ -778,6 +785,16 @@
int i;
unsigned int min_pkt_size = dev->width * 2 + 4;
+ /*
+ * alt = 0 is used only for control messages, so, only values
+ * greater than 0 can be used for streaming.
+ */
+ if (alt && alt < dev->num_alt) {
+ em28xx_coredbg("alternate forced to %d\n", dev->alt);
+ dev->alt = alt;
+ goto set_alt;
+ }
+
/* When image size is bigger than a certain value,
the frame size should be increased, otherwise, only
green screen will be received.
@@ -798,6 +815,7 @@
dev->alt = i;
}
+set_alt:
if (dev->alt != prev_alt) {
em28xx_coredbg("minimum isoc packet size: %u (alt=%d)\n",
min_pkt_size, dev->alt);
diff --git a/drivers/media/video/em28xx/em28xx-dvb.c b/drivers/media/video/em28xx/em28xx-dvb.c
index db74946..cc0505e 100644
--- a/drivers/media/video/em28xx/em28xx-dvb.c
+++ b/drivers/media/video/em28xx/em28xx-dvb.c
@@ -313,22 +313,20 @@
cfg.i2c_addr = addr;
if (!dev->dvb->frontend) {
- printk(KERN_ERR "%s/2: dvb frontend not attached. "
- "Can't attach xc3028\n",
- dev->name);
+ em28xx_errdev("/2: dvb frontend not attached. "
+ "Can't attach xc3028\n");
return -EINVAL;
}
fe = dvb_attach(xc2028_attach, dev->dvb->frontend, &cfg);
if (!fe) {
- printk(KERN_ERR "%s/2: xc3028 attach failed\n",
- dev->name);
+ em28xx_errdev("/2: xc3028 attach failed\n");
dvb_frontend_detach(dev->dvb->frontend);
dev->dvb->frontend = NULL;
return -EINVAL;
}
- printk(KERN_INFO "%s/2: xc3028 attached\n", dev->name);
+ em28xx_info("%s/2: xc3028 attached\n", dev->name);
return 0;
}
@@ -463,7 +461,7 @@
dvb = kzalloc(sizeof(struct em28xx_dvb), GFP_KERNEL);
if (dvb == NULL) {
- printk(KERN_INFO "em28xx_dvb: memory allocation failed\n");
+ em28xx_info("em28xx_dvb: memory allocation failed\n");
return -ENOMEM;
}
dev->dvb = dvb;
@@ -493,6 +491,7 @@
}
break;
case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
+ case EM2882_BOARD_TERRATEC_HYBRID_XS:
case EM2880_BOARD_EMPIRE_DUAL_TV:
dvb->frontend = dvb_attach(zl10353_attach,
&em28xx_zl10353_xc3028_no_i2c_gate,
@@ -569,15 +568,12 @@
}
break;
default:
- printk(KERN_ERR "%s/2: The frontend of your DVB/ATSC card"
- " isn't supported yet\n",
- dev->name);
+ em28xx_errdev("/2: The frontend of your DVB/ATSC card"
+ " isn't supported yet\n");
break;
}
if (NULL == dvb->frontend) {
- printk(KERN_ERR
- "%s/2: frontend initialization failed\n",
- dev->name);
+ em28xx_errdev("/2: frontend initialization failed\n");
result = -EINVAL;
goto out_free;
}
@@ -591,7 +587,7 @@
goto out_free;
em28xx_set_mode(dev, EM28XX_SUSPEND);
- printk(KERN_INFO "Successfully loaded em28xx-dvb\n");
+ em28xx_info("Successfully loaded em28xx-dvb\n");
return 0;
out_free:
diff --git a/drivers/media/video/em28xx/em28xx-input.c b/drivers/media/video/em28xx/em28xx-input.c
index 7a0fe38..d96ec7c 100644
--- a/drivers/media/video/em28xx/em28xx-input.c
+++ b/drivers/media/video/em28xx/em28xx-input.c
@@ -70,6 +70,7 @@
int polling;
struct delayed_work work;
unsigned int last_toggle:1;
+ unsigned int full_code:1;
unsigned int last_readcount;
unsigned int repeat_interval;
@@ -246,9 +247,10 @@
return;
}
- dprintk("ir->get_key result tb=%02x rc=%02x lr=%02x data=%02x\n",
+ dprintk("ir->get_key result tb=%02x rc=%02x lr=%02x data=%02x%02x\n",
poll_result.toggle_bit, poll_result.read_count,
- ir->last_readcount, poll_result.rc_data[0]);
+ ir->last_readcount, poll_result.rc_address,
+ poll_result.rc_data[0]);
if (ir->dev->chip_id == CHIP_ID_EM2874) {
/* The em2874 clears the readcount field every time the
@@ -282,8 +284,15 @@
if (do_sendkey) {
dprintk("sending keypress\n");
- ir_input_keydown(ir->input, &ir->ir, poll_result.rc_data[0],
- poll_result.rc_data[0]);
+
+ if (ir->full_code)
+ ir_input_keydown(ir->input, &ir->ir,
+ poll_result.rc_address << 8 |
+ poll_result.rc_data[0]);
+ else
+ ir_input_keydown(ir->input, &ir->ir,
+ poll_result.rc_data[0]);
+
ir_input_nokey(ir->input, &ir->ir);
}
@@ -333,6 +342,8 @@
switch (dev->chip_id) {
case CHIP_ID_EM2860:
case CHIP_ID_EM2883:
+ if (dev->model == EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950)
+ ir->full_code = 1;
ir->get_key = default_polling_getkey;
break;
case CHIP_ID_EM2874:
@@ -356,7 +367,11 @@
usb_make_path(dev->udev, ir->phys, sizeof(ir->phys));
strlcat(ir->phys, "/input0", sizeof(ir->phys));
- ir_input_init(input_dev, &ir->ir, IR_TYPE_OTHER, dev->board.ir_codes);
+ err = ir_input_init(input_dev, &ir->ir, IR_TYPE_OTHER,
+ dev->board.ir_codes);
+ if (err < 0)
+ goto err_out_free;
+
input_dev->name = ir->name;
input_dev->phys = ir->phys;
input_dev->id.bustype = BUS_USB;
@@ -381,6 +396,7 @@
em28xx_ir_stop(ir);
dev->ir = NULL;
err_out_free:
+ ir_input_free(input_dev);
input_free_device(input_dev);
kfree(ir);
return err;
@@ -395,6 +411,7 @@
return 0;
em28xx_ir_stop(ir);
+ ir_input_free(ir->input);
input_unregister_device(ir->input);
kfree(ir);
diff --git a/drivers/media/video/em28xx/em28xx-reg.h b/drivers/media/video/em28xx/em28xx-reg.h
index ed12e7f..058ac87 100644
--- a/drivers/media/video/em28xx/em28xx-reg.h
+++ b/drivers/media/video/em28xx/em28xx-reg.h
@@ -192,6 +192,7 @@
/* FIXME: Need to be populated with the other chip ID's */
enum em28xx_chip_id {
+ CHIP_ID_EM2800 = 7,
CHIP_ID_EM2710 = 17,
CHIP_ID_EM2820 = 18, /* Also used by some em2710 */
CHIP_ID_EM2840 = 20,
diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c
index 3a1dfb7..7ad6537 100644
--- a/drivers/media/video/em28xx/em28xx-video.c
+++ b/drivers/media/video/em28xx/em28xx-video.c
@@ -1060,12 +1060,6 @@
/* the em2800 can only scale down to 50% */
height = height > (3 * maxh / 4) ? maxh : maxh / 2;
width = width > (3 * maxw / 4) ? maxw : maxw / 2;
- /* According to empiatech support the MaxPacketSize is too small
- * to support framesizes larger than 640x480 @ 30 fps or 640x576
- * @ 25 fps. As this would cut of a part of the image we prefer
- * 360x576 or 360x480 for now */
- if (width == maxw && height == maxh)
- width /= 2;
} else {
/* width must even because of the YUYV format
height must be even because of interlacing */
@@ -2225,7 +2219,7 @@
}
/* Save some power by putting tuner to sleep */
- v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_standby);
+ v4l2_device_call_all(&dev->v4l2_dev, 0, core, s_power, 0);
/* do this before setting alternate! */
em28xx_uninit_isoc(dev);
diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h
index 0a73e8b..441df64 100644
--- a/drivers/media/video/em28xx/em28xx.h
+++ b/drivers/media/video/em28xx/em28xx.h
@@ -110,6 +110,7 @@
#define EM2820_BOARD_SILVERCREST_WEBCAM 71
#define EM2861_BOARD_GADMEI_UTV330PLUS 72
#define EM2870_BOARD_REDDO_DVB_C_USB_BOX 73
+#define EM2800_BOARD_VC211A 74
/* Limits minimum and default number of buffers */
#define EM28XX_MIN_BUF 4
@@ -143,9 +144,6 @@
*/
#define EM28XX_NUM_PACKETS 40
-/* default alternate; 0 means choose the best */
-#define EM28XX_PINOUT 0
-
#define EM28XX_INTERLACED_DEFAULT 1
/*
@@ -615,7 +613,6 @@
struct em28xx_dvb *dvb;
/* I2C keyboard data */
- struct i2c_board_info info;
struct IR_i2c_init_data init_data;
};
@@ -800,7 +797,7 @@
if (dev->board.is_webcam)
return dev->sensor_xres;
- if (dev->board.max_range_640_480)
+ if (dev->board.max_range_640_480 || dev->board.is_em2800)
return 640;
return 720;
diff --git a/drivers/media/video/gspca/Kconfig b/drivers/media/video/gspca/Kconfig
index fe2e490..609d65b 100644
--- a/drivers/media/video/gspca/Kconfig
+++ b/drivers/media/video/gspca/Kconfig
@@ -76,10 +76,11 @@
module will be called gspca_mr97310a.
config USB_GSPCA_OV519
- tristate "OV519 USB Camera Driver"
+ tristate "OV51x / OVFX2 / W996xCF USB Camera Driver"
depends on VIDEO_V4L2 && USB_GSPCA
help
- Say Y here if you want support for cameras based on the OV519 chip.
+ Say Y here if you want support for cameras based on one of these:
+ OV511(+), OV518(+), OV519, OVFX2, W9967CF, W9968CF
To compile this driver as a module, choose M here: the
module will be called gspca_ov519.
@@ -103,6 +104,15 @@
To compile this driver as a module, choose M here: the
module will be called gspca_pac207.
+config USB_GSPCA_PAC7302
+ tristate "Pixart PAC7302 USB Camera Driver"
+ depends on VIDEO_V4L2 && USB_GSPCA
+ help
+ Say Y here if you want support for cameras based on the PAC7302 chip.
+
+ To compile this driver as a module, choose M here: the
+ module will be called gspca_pac7302.
+
config USB_GSPCA_PAC7311
tristate "Pixart PAC7311 USB Camera Driver"
depends on VIDEO_V4L2 && USB_GSPCA
@@ -229,6 +239,15 @@
To compile this driver as a module, choose M here: the
module will be called gspca_stk014.
+config USB_GSPCA_STV0680
+ tristate "STV0680 USB Camera Driver"
+ depends on VIDEO_V4L2 && USB_GSPCA
+ help
+ Say Y here if you want support for cameras based on the STV0680 chip.
+
+ To compile this driver as a module, choose M here: the
+ module will be called gspca_stv0680.
+
config USB_GSPCA_SUNPLUS
tristate "SUNPLUS USB Camera Driver"
depends on VIDEO_V4L2 && USB_GSPCA
diff --git a/drivers/media/video/gspca/Makefile b/drivers/media/video/gspca/Makefile
index b742081..ff2c727 100644
--- a/drivers/media/video/gspca/Makefile
+++ b/drivers/media/video/gspca/Makefile
@@ -8,6 +8,7 @@
obj-$(CONFIG_USB_GSPCA_OV519) += gspca_ov519.o
obj-$(CONFIG_USB_GSPCA_OV534) += gspca_ov534.o
obj-$(CONFIG_USB_GSPCA_PAC207) += gspca_pac207.o
+obj-$(CONFIG_USB_GSPCA_PAC7302) += gspca_pac7302.o
obj-$(CONFIG_USB_GSPCA_PAC7311) += gspca_pac7311.o
obj-$(CONFIG_USB_GSPCA_SN9C20X) += gspca_sn9c20x.o
obj-$(CONFIG_USB_GSPCA_SONIXB) += gspca_sonixb.o
@@ -22,6 +23,7 @@
obj-$(CONFIG_USB_GSPCA_SQ905C) += gspca_sq905c.o
obj-$(CONFIG_USB_GSPCA_SUNPLUS) += gspca_sunplus.o
obj-$(CONFIG_USB_GSPCA_STK014) += gspca_stk014.o
+obj-$(CONFIG_USB_GSPCA_STV0680) += gspca_stv0680.o
obj-$(CONFIG_USB_GSPCA_T613) += gspca_t613.o
obj-$(CONFIG_USB_GSPCA_TV8532) += gspca_tv8532.o
obj-$(CONFIG_USB_GSPCA_VC032X) += gspca_vc032x.o
@@ -37,6 +39,7 @@
gspca_ov519-objs := ov519.o
gspca_ov534-objs := ov534.o
gspca_pac207-objs := pac207.o
+gspca_pac7302-objs := pac7302.o
gspca_pac7311-objs := pac7311.o
gspca_sn9c20x-objs := sn9c20x.o
gspca_sonixb-objs := sonixb.o
@@ -50,6 +53,7 @@
gspca_sq905-objs := sq905.o
gspca_sq905c-objs := sq905c.o
gspca_stk014-objs := stk014.o
+gspca_stv0680-objs := stv0680.o
gspca_sunplus-objs := sunplus.o
gspca_t613-objs := t613.o
gspca_tv8532-objs := tv8532.o
diff --git a/drivers/media/video/gspca/conex.c b/drivers/media/video/gspca/conex.c
index eca0035..2f0b8d6 100644
--- a/drivers/media/video/gspca/conex.c
+++ b/drivers/media/video/gspca/conex.c
@@ -888,8 +888,7 @@
}
static void sd_pkt_scan(struct gspca_dev *gspca_dev,
- struct gspca_frame *frame, /* target */
- __u8 *data, /* isoc packet */
+ u8 *data, /* isoc packet */
int len) /* iso packet length */
{
struct sd *sd = (struct sd *) gspca_dev;
@@ -897,16 +896,15 @@
if (data[0] == 0xff && data[1] == 0xd8) {
/* start of frame */
- frame = gspca_frame_add(gspca_dev, LAST_PACKET, frame,
- data, 0);
+ gspca_frame_add(gspca_dev, LAST_PACKET, NULL, 0);
/* put the JPEG header in the new frame */
- gspca_frame_add(gspca_dev, FIRST_PACKET, frame,
- sd->jpeg_hdr, JPEG_HDR_SZ);
+ gspca_frame_add(gspca_dev, FIRST_PACKET,
+ sd->jpeg_hdr, JPEG_HDR_SZ);
data += 2;
len -= 2;
}
- gspca_frame_add(gspca_dev, INTER_PACKET, frame, data, len);
+ gspca_frame_add(gspca_dev, INTER_PACKET, data, len);
}
static void setbrightness(struct gspca_dev*gspca_dev)
diff --git a/drivers/media/video/gspca/etoms.c b/drivers/media/video/gspca/etoms.c
index c1461e6..9de8641 100644
--- a/drivers/media/video/gspca/etoms.c
+++ b/drivers/media/video/gspca/etoms.c
@@ -752,8 +752,7 @@
#undef LIMIT
static void sd_pkt_scan(struct gspca_dev *gspca_dev,
- struct gspca_frame *frame, /* target */
- __u8 *data, /* isoc packet */
+ u8 *data, /* isoc packet */
int len) /* iso packet length */
{
int seqframe;
@@ -767,14 +766,13 @@
data[2], data[3], data[4], data[5]);
data += 30;
/* don't change datalength as the chips provided it */
- frame = gspca_frame_add(gspca_dev, LAST_PACKET, frame,
- data, 0);
- gspca_frame_add(gspca_dev, FIRST_PACKET, frame, data, len);
+ gspca_frame_add(gspca_dev, LAST_PACKET, NULL, 0);
+ gspca_frame_add(gspca_dev, FIRST_PACKET, data, len);
return;
}
if (len) {
data += 8;
- gspca_frame_add(gspca_dev, INTER_PACKET, frame, data, len);
+ gspca_frame_add(gspca_dev, INTER_PACKET, data, len);
} else { /* Drop Packet */
gspca_dev->last_packet_type = DISCARD_PACKET;
}
diff --git a/drivers/media/video/gspca/finepix.c b/drivers/media/video/gspca/finepix.c
index 480ec5c..5d90e74 100644
--- a/drivers/media/video/gspca/finepix.c
+++ b/drivers/media/video/gspca/finepix.c
@@ -82,7 +82,6 @@
struct gspca_dev *gspca_dev = &dev->gspca_dev;
struct urb *urb = gspca_dev->urb[0];
u8 *data = urb->transfer_buffer;
- struct gspca_frame *frame;
int ret = 0;
int len;
@@ -118,10 +117,6 @@
}
if (!gspca_dev->present || !gspca_dev->streaming)
goto out;
- frame = gspca_get_i_frame(&dev->gspca_dev);
- if (frame == NULL)
- gspca_dev->last_packet_type = DISCARD_PACKET;
-
if (len < FPIX_MAX_TRANSFER ||
(data[len - 2] == 0xff &&
data[len - 1] == 0xd9)) {
@@ -132,21 +127,17 @@
* but there's nothing we can do. We also end
* here if the the jpeg ends right at the end
* of the frame. */
- if (frame)
- frame = gspca_frame_add(gspca_dev,
- LAST_PACKET,
- frame,
- data, len);
+ gspca_frame_add(gspca_dev, LAST_PACKET,
+ data, len);
break;
}
/* got a partial image */
- if (frame)
- gspca_frame_add(gspca_dev,
- gspca_dev->last_packet_type
- == LAST_PACKET
- ? FIRST_PACKET : INTER_PACKET,
- frame, data, len);
+ gspca_frame_add(gspca_dev,
+ gspca_dev->last_packet_type
+ == LAST_PACKET
+ ? FIRST_PACKET : INTER_PACKET,
+ data, len);
}
/* We must wait before trying reading the next
diff --git a/drivers/media/video/gspca/gl860/gl860-mi1320.c b/drivers/media/video/gspca/gl860/gl860-mi1320.c
index 39f6261..1355e52 100644
--- a/drivers/media/video/gspca/gl860/gl860-mi1320.c
+++ b/drivers/media/video/gspca/gl860/gl860-mi1320.c
@@ -1,6 +1,5 @@
-/* @file gl860-mi1320.c
- * @author Olivier LORIN from my logs
- * @date 2009-08-27
+/* Subdriver for the GL860 chip with the MI1320 sensor
+ * Author Olivier LORIN from own logs
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -127,49 +126,49 @@
static u8 dat_hvflip1[] = {0xf0, 0x00, 0xf1, 0x00};
-static u8 s000[] =
+static u8 dat_common00[] =
"\x00\x01\x07\x6a\x06\x63\x0d\x6a" "\xc0\x00\x10\x10\xc1\x03\xc2\x42"
"\xd8\x04\x58\x00\x04\x02";
-static u8 s001[] =
+static u8 dat_common01[] =
"\x0d\x00\xf1\x0b\x0d\x00\xf1\x08" "\x35\x00\xf1\x22\x68\x00\xf1\x5d"
"\xf0\x00\xf1\x01\x06\x70\xf1\x0e" "\xf0\x00\xf1\x02\xdd\x18\xf1\xe0";
-static u8 s002[] =
+static u8 dat_common02[] =
"\x05\x01\xf1\x84\x06\x00\xf1\x44" "\x07\x00\xf1\xbe\x08\x00\xf1\x1e"
"\x20\x01\xf1\x03\x21\x84\xf1\x00" "\x22\x0d\xf1\x0f\x24\x80\xf1\x00"
"\x34\x18\xf1\x2d\x35\x00\xf1\x22" "\x43\x83\xf1\x83\x59\x00\xf1\xff";
-static u8 s003[] =
+static u8 dat_common03[] =
"\xf0\x00\xf1\x02\x39\x06\xf1\x8c" "\x3a\x06\xf1\x8c\x3b\x03\xf1\xda"
"\x3c\x05\xf1\x30\x57\x01\xf1\x0c" "\x58\x01\xf1\x42\x59\x01\xf1\x0c"
"\x5a\x01\xf1\x42\x5c\x13\xf1\x0e" "\x5d\x17\xf1\x12\x64\x1e\xf1\x1c";
-static u8 s004[] =
+static u8 dat_common04[] =
"\xf0\x00\xf1\x02\x24\x5f\xf1\x20" "\x28\xea\xf1\x02\x5f\x41\xf1\x43";
-static u8 s005[] =
+static u8 dat_common05[] =
"\x02\x00\xf1\xee\x03\x29\xf1\x1a" "\x04\x02\xf1\xa4\x09\x00\xf1\x68"
"\x0a\x00\xf1\x2a\x0b\x00\xf1\x04" "\x0c\x00\xf1\x93\x0d\x00\xf1\x82"
"\x0e\x00\xf1\x40\x0f\x00\xf1\x5f" "\x10\x00\xf1\x4e\x11\x00\xf1\x5b";
-static u8 s006[] =
+static u8 dat_common06[] =
"\x15\x00\xf1\xc9\x16\x00\xf1\x5e" "\x17\x00\xf1\x9d\x18\x00\xf1\x06"
"\x19\x00\xf1\x89\x1a\x00\xf1\x12" "\x1b\x00\xf1\xa1\x1c\x00\xf1\xe4"
"\x1d\x00\xf1\x7a\x1e\x00\xf1\x64" "\xf6\x00\xf1\x5f";
-static u8 s007[] =
+static u8 dat_common07[] =
"\xf0\x00\xf1\x01\x53\x09\xf1\x03" "\x54\x3d\xf1\x1c\x55\x99\xf1\x72"
"\x56\xc1\xf1\xb1\x57\xd8\xf1\xce" "\x58\xe0\xf1\x00\xdc\x0a\xf1\x03"
"\xdd\x45\xf1\x20\xde\xae\xf1\x82" "\xdf\xdc\xf1\xc9\xe0\xf6\xf1\xea"
"\xe1\xff\xf1\x00";
-static u8 s008[] =
+static u8 dat_common08[] =
"\xf0\x00\xf1\x01\x80\x00\xf1\x06" "\x81\xf6\xf1\x08\x82\xfb\xf1\xf7"
"\x83\x00\xf1\xfe\xb6\x07\xf1\x03" "\xb7\x18\xf1\x0c\x84\xfb\xf1\x06"
"\x85\xfb\xf1\xf9\x86\x00\xf1\xff" "\xb8\x07\xf1\x04\xb9\x16\xf1\x0a";
-static u8 s009[] =
+static u8 dat_common09[] =
"\x87\xfa\xf1\x05\x88\xfc\xf1\xf9" "\x89\x00\xf1\xff\xba\x06\xf1\x03"
"\xbb\x17\xf1\x09\x8a\xe8\xf1\x14" "\x8b\xf7\xf1\xf0\x8c\xfd\xf1\xfa"
"\x8d\x00\xf1\x00\xbc\x05\xf1\x01" "\xbd\x0c\xf1\x08\xbe\x00\xf1\x14";
-static u8 s010[] =
+static u8 dat_common10[] =
"\x8e\xea\xf1\x13\x8f\xf7\xf1\xf2" "\x90\xfd\xf1\xfa\x91\x00\xf1\x00"
"\xbf\x05\xf1\x01\xc0\x0a\xf1\x08" "\xc1\x00\xf1\x0c\x92\xed\xf1\x0f"
"\x93\xf9\xf1\xf4\x94\xfe\xf1\xfb" "\x95\x00\xf1\x00\xc2\x04\xf1\x01"
"\xc3\x0a\xf1\x07\xc4\x00\xf1\x10";
-static u8 s011[] =
+static u8 dat_common11[] =
"\xf0\x00\xf1\x01\x05\x00\xf1\x06" "\x25\x00\xf1\x55\x34\x10\xf1\x10"
"\x35\xf0\xf1\x10\x3a\x02\xf1\x03" "\x3b\x04\xf1\x2a\x9b\x43\xf1\x00"
"\xa4\x03\xf1\xc0\xa7\x02\xf1\x81";
@@ -222,26 +221,26 @@
static void common(struct gspca_dev *gspca_dev)
{
- s32 n; /* reserved for FETCH macros */
+ s32 n; /* reserved for FETCH functions */
- ctrl_out(gspca_dev, 0x40, 3, 0x0000, 0x0200, 22, s000);
+ ctrl_out(gspca_dev, 0x40, 3, 0x0000, 0x0200, 22, dat_common00);
ctrl_out(gspca_dev, 0x40, 1, 0x0041, 0x0000, 0, NULL);
- ctrl_out(gspca_dev, 0x40, 3, 0xba00, 0x0200, 32, s001);
+ ctrl_out(gspca_dev, 0x40, 3, 0xba00, 0x0200, 32, dat_common01);
n = fetch_validx(gspca_dev, tbl_common, ARRAY_SIZE(tbl_common));
- ctrl_out(gspca_dev, 0x40, 3, 0xba00, 0x0200, 48, s002);
- ctrl_out(gspca_dev, 0x40, 3, 0xba00, 0x0200, 48, s003);
- ctrl_out(gspca_dev, 0x40, 3, 0xba00, 0x0200, 16, s004);
- ctrl_out(gspca_dev, 0x40, 3, 0xba00, 0x0200, 48, s005);
- ctrl_out(gspca_dev, 0x40, 3, 0xba00, 0x0200, 44, s006);
+ ctrl_out(gspca_dev, 0x40, 3, 0xba00, 0x0200, 48, dat_common02);
+ ctrl_out(gspca_dev, 0x40, 3, 0xba00, 0x0200, 48, dat_common03);
+ ctrl_out(gspca_dev, 0x40, 3, 0xba00, 0x0200, 16, dat_common04);
+ ctrl_out(gspca_dev, 0x40, 3, 0xba00, 0x0200, 48, dat_common05);
+ ctrl_out(gspca_dev, 0x40, 3, 0xba00, 0x0200, 44, dat_common06);
keep_on_fetching_validx(gspca_dev, tbl_common,
ARRAY_SIZE(tbl_common), n);
- ctrl_out(gspca_dev, 0x40, 3, 0xba00, 0x0200, 52, s007);
- ctrl_out(gspca_dev, 0x40, 3, 0xba00, 0x0200, 48, s008);
- ctrl_out(gspca_dev, 0x40, 3, 0xba00, 0x0200, 48, s009);
- ctrl_out(gspca_dev, 0x40, 3, 0xba00, 0x0200, 56, s010);
+ ctrl_out(gspca_dev, 0x40, 3, 0xba00, 0x0200, 52, dat_common07);
+ ctrl_out(gspca_dev, 0x40, 3, 0xba00, 0x0200, 48, dat_common08);
+ ctrl_out(gspca_dev, 0x40, 3, 0xba00, 0x0200, 48, dat_common09);
+ ctrl_out(gspca_dev, 0x40, 3, 0xba00, 0x0200, 56, dat_common10);
keep_on_fetching_validx(gspca_dev, tbl_common,
ARRAY_SIZE(tbl_common), n);
- ctrl_out(gspca_dev, 0x40, 3, 0xba00, 0x0200, 40, s011);
+ ctrl_out(gspca_dev, 0x40, 3, 0xba00, 0x0200, 40, dat_common11);
keep_on_fetching_validx(gspca_dev, tbl_common,
ARRAY_SIZE(tbl_common), n);
}
diff --git a/drivers/media/video/gspca/gl860/gl860-mi2020.c b/drivers/media/video/gspca/gl860/gl860-mi2020.c
index ffb09fe..80cb3f1 100644
--- a/drivers/media/video/gspca/gl860/gl860-mi2020.c
+++ b/drivers/media/video/gspca/gl860/gl860-mi2020.c
@@ -1,7 +1,6 @@
-/* @file gl860-mi2020.c
- * @author Olivier LORIN, from Ice/Soro2005's logs(A), Fret_saw/Hulkie's
+/* Subdriver for the GL860 chip with the MI2020 sensor
+ * Author Olivier LORIN, from Ice/Soro2005's logs(A), Fret_saw/Hulkie's
* logs(B) and Tricid"s logs(C). With the help of Kytrix/BUGabundo/Blazercist.
- * @date 2009-08-27
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -41,7 +40,7 @@
static u8 dat_multi5[] = { 0x8c, 0xa1, 0x03 };
static u8 dat_multi6[] = { 0x90, 0x00, 0x05 };
-static struct validx tbl_common_a[] = {
+static struct validx tbl_common1[] = {
{0x0000, 0x0000},
{1, 0xffff}, /* msleep(35); */
{0x006a, 0x0007}, {0x0063, 0x0006}, {0x006a, 0x000d}, {0x0000, 0x00c0},
@@ -49,7 +48,7 @@
{0x0000, 0x0058}, {0x0002, 0x0004}, {0x0041, 0x0000},
};
-static struct validx tbl_common_b[] = {
+static struct validx tbl_common2[] = {
{0x006a, 0x0007},
{35, 0xffff},
{0x00ef, 0x0006},
@@ -60,7 +59,7 @@
{0x0004, 0x00d8}, {0x0000, 0x0058}, {0x0041, 0x0000},
};
-static struct idxdata tbl_common_c[] = {
+static struct idxdata tbl_common3[] = {
{0x32, "\x02\x00\x08"}, {0x33, "\xf4\x03\x1d"},
{6, "\xff\xff\xff"}, /* 12 */
{0x34, "\x1e\x8f\x09"}, {0x34, "\x1c\x01\x28"}, {0x34, "\x1e\x8f\x09"},
@@ -109,7 +108,7 @@
{0x33, "\x8c\xa2\x03"}, {0x33, "\x90\x00\xbb"},
};
-static struct idxdata tbl_common_d[] = {
+static struct idxdata tbl_common4[] = {
{0x33, "\x8c\x22\x2e"}, {0x33, "\x90\x00\xa0"}, {0x33, "\x8c\xa4\x08"},
{0x33, "\x90\x00\x1f"}, {0x33, "\x8c\xa4\x09"}, {0x33, "\x90\x00\x21"},
{0x33, "\x8c\xa4\x0a"}, {0x33, "\x90\x00\x25"}, {0x33, "\x8c\xa4\x0b"},
@@ -118,7 +117,7 @@
{0x33, "\x90\x00\xa0"}, {0x33, "\x8c\x24\x17"}, {0x33, "\x90\x00\xc0"},
};
-static struct idxdata tbl_common_e[] = {
+static struct idxdata tbl_common5[] = {
{0x33, "\x8c\xa4\x04"}, {0x33, "\x90\x00\x80"}, {0x33, "\x8c\xa7\x9d"},
{0x33, "\x90\x00\x00"}, {0x33, "\x8c\xa7\x9e"}, {0x33, "\x90\x00\x00"},
{0x33, "\x8c\xa2\x0c"}, {0x33, "\x90\x00\x17"}, {0x33, "\x8c\xa2\x15"},
@@ -180,7 +179,7 @@
{53, 0xffff},
};
-static struct idxdata tbl_init_post_alt_low_a[] = {
+static struct idxdata tbl_init_post_alt_low1[] = {
{0x33, "\x8c\x27\x15"}, {0x33, "\x90\x00\x25"}, {0x33, "\x8c\x22\x2e"},
{0x33, "\x90\x00\x81"}, {0x33, "\x8c\xa4\x08"}, {0x33, "\x90\x00\x17"},
{0x33, "\x8c\xa4\x09"}, {0x33, "\x90\x00\x1a"}, {0x33, "\x8c\xa4\x0a"},
@@ -189,7 +188,7 @@
{0x33, "\x90\x00\x9b"},
};
-static struct idxdata tbl_init_post_alt_low_b[] = {
+static struct idxdata tbl_init_post_alt_low2[] = {
{0x33, "\x8c\x27\x03"}, {0x33, "\x90\x03\x24"}, {0x33, "\x8c\x27\x05"},
{0x33, "\x90\x02\x58"}, {0x33, "\x8c\xa1\x03"}, {0x33, "\x90\x00\x05"},
{2, "\xff\xff\xff"},
@@ -197,7 +196,7 @@
{2, "\xff\xff\xff"},
};
-static struct idxdata tbl_init_post_alt_low_c[] = {
+static struct idxdata tbl_init_post_alt_low3[] = {
{0x34, "\x1e\x8f\x09"}, {0x34, "\x1c\x01\x28"}, {0x34, "\x1e\x8f\x09"},
{2, "\xff\xff\xff"},
{0x34, "\x1e\x8f\x09"}, {0x32, "\x14\x06\xe6"}, {0x33, "\x8c\xa1\x20"},
@@ -221,7 +220,7 @@
{1, "\xff\xff\xff"},
};
-static struct idxdata tbl_init_post_alt_low_d[] = {
+static struct idxdata tbl_init_post_alt_low4[] = {
{0x32, "\x10\x01\xf8"}, {0x34, "\xce\x01\xa8"}, {0x34, "\xd0\x66\x33"},
{0x34, "\xd2\x31\x9a"}, {0x34, "\xd4\x94\x63"}, {0x34, "\xd6\x4b\x25"},
{0x34, "\xd8\x26\x70"}, {0x34, "\xda\x72\x4c"}, {0x34, "\xdc\xff\x04"},
@@ -267,7 +266,7 @@
{0x32, "\x6c\x14\x08"},
};
-static struct idxdata tbl_init_post_alt_big_a[] = {
+static struct idxdata tbl_init_post_alt_big1[] = {
{0x33, "\x8c\xa1\x03"}, {0x33, "\x90\x00\x05"},
{2, "\xff\xff\xff"},
{0x33, "\x8c\xa1\x03"}, {0x33, "\x90\x00\x06"},
@@ -288,7 +287,7 @@
{0x34, "\x04\x00\x2a"}, {0x33, "\x8c\xa7\x02"}, {0x33, "\x90\x00\x01"},
};
-static struct idxdata tbl_init_post_alt_big_b[] = {
+static struct idxdata tbl_init_post_alt_big2[] = {
{0x32, "\x10\x01\xf8"}, {0x34, "\xce\x01\xa8"}, {0x34, "\xd0\x66\x33"},
{0x34, "\xd2\x31\x9a"}, {0x34, "\xd4\x94\x63"}, {0x34, "\xd6\x4b\x25"},
{0x34, "\xd8\x26\x70"}, {0x34, "\xda\x72\x4c"}, {0x34, "\xdc\xff\x04"},
@@ -317,7 +316,7 @@
{0x32, "\x10\x01\xfc"}, {0x33, "\x8c\xa1\x18"}, {0x33, "\x90\x00\x3c"},
};
-static struct idxdata tbl_init_post_alt_big_c[] = {
+static struct idxdata tbl_init_post_alt_big3[] = {
{0x33, "\x8c\xa1\x02"},
{0x33, "\x90\x00\x1f"},
{0x33, "\x8c\xa1\x02"},
@@ -388,14 +387,14 @@
s32 reso = gspca_dev->cam.cam_mode[(s32) gspca_dev->curr_mode].priv;
if (_MI2020b_) {
- fetch_validx(gspca_dev, tbl_common_a, ARRAY_SIZE(tbl_common_a));
+ fetch_validx(gspca_dev, tbl_common1, ARRAY_SIZE(tbl_common1));
} else {
if (_MI2020_)
ctrl_out(gspca_dev, 0x40, 1, 0x0008, 0x0004, 0, NULL);
else
ctrl_out(gspca_dev, 0x40, 1, 0x0002, 0x0004, 0, NULL);
msleep(35);
- fetch_validx(gspca_dev, tbl_common_b, ARRAY_SIZE(tbl_common_b));
+ fetch_validx(gspca_dev, tbl_common2, ARRAY_SIZE(tbl_common2));
}
ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x86\x25\x01");
ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x86\x25\x00");
@@ -403,13 +402,13 @@
ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0030, 3, "\x1a\x0a\xcc");
if (reso == IMAGE_1600)
msleep(2); /* 1600 */
- fetch_idxdata(gspca_dev, tbl_common_c, ARRAY_SIZE(tbl_common_c));
+ fetch_idxdata(gspca_dev, tbl_common3, ARRAY_SIZE(tbl_common3));
if (_MI2020b_ || _MI2020_)
- fetch_idxdata(gspca_dev, tbl_common_d,
- ARRAY_SIZE(tbl_common_d));
+ fetch_idxdata(gspca_dev, tbl_common4,
+ ARRAY_SIZE(tbl_common4));
- fetch_idxdata(gspca_dev, tbl_common_e, ARRAY_SIZE(tbl_common_e));
+ fetch_idxdata(gspca_dev, tbl_common5, ARRAY_SIZE(tbl_common5));
if (_MI2020b_ || _MI2020_) {
/* Different from fret */
ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, "\x90\x00\x78");
@@ -525,15 +524,15 @@
12, dat_800);
if (_MI2020c_)
- fetch_idxdata(gspca_dev, tbl_init_post_alt_low_a,
- ARRAY_SIZE(tbl_init_post_alt_low_a));
+ fetch_idxdata(gspca_dev, tbl_init_post_alt_low1,
+ ARRAY_SIZE(tbl_init_post_alt_low1));
if (reso == IMAGE_800)
- fetch_idxdata(gspca_dev, tbl_init_post_alt_low_b,
- ARRAY_SIZE(tbl_init_post_alt_low_b));
+ fetch_idxdata(gspca_dev, tbl_init_post_alt_low2,
+ ARRAY_SIZE(tbl_init_post_alt_low2));
- fetch_idxdata(gspca_dev, tbl_init_post_alt_low_c,
- ARRAY_SIZE(tbl_init_post_alt_low_c));
+ fetch_idxdata(gspca_dev, tbl_init_post_alt_low3,
+ ARRAY_SIZE(tbl_init_post_alt_low3));
if (_MI2020b_) {
ctrl_out(gspca_dev, 0x40, 1, 0x0001, 0x0010, 0, NULL);
@@ -574,8 +573,8 @@
msleep(5);/* " */
if (_MI2020c_) {
- fetch_idxdata(gspca_dev, tbl_init_post_alt_low_d,
- ARRAY_SIZE(tbl_init_post_alt_low_d));
+ fetch_idxdata(gspca_dev, tbl_init_post_alt_low4,
+ ARRAY_SIZE(tbl_init_post_alt_low4));
} else {
ctrl_in(gspca_dev, 0xc0, 2, 0x0000, 0x0000, 1, &c);
msleep(14); /* 0xd8 */
@@ -644,8 +643,8 @@
3, "\x90\x04\xb0");
}
- fetch_idxdata(gspca_dev, tbl_init_post_alt_big_a,
- ARRAY_SIZE(tbl_init_post_alt_big_a));
+ fetch_idxdata(gspca_dev, tbl_init_post_alt_big1,
+ ARRAY_SIZE(tbl_init_post_alt_big1));
if (reso == IMAGE_1600)
msleep(13); /* 1600 */
@@ -708,8 +707,8 @@
msleep(14);
if (_MI2020c_)
- fetch_idxdata(gspca_dev, tbl_init_post_alt_big_b,
- ARRAY_SIZE(tbl_init_post_alt_big_b));
+ fetch_idxdata(gspca_dev, tbl_init_post_alt_big2,
+ ARRAY_SIZE(tbl_init_post_alt_big2));
/* flip/mirror */
ctrl_out(gspca_dev, 0x40, 3, 0x7a00, 0x0033, 3, dat_hvflip1);
@@ -738,8 +737,8 @@
sd->nbIm = 0;
if (_MI2020c_)
- fetch_idxdata(gspca_dev, tbl_init_post_alt_big_c,
- ARRAY_SIZE(tbl_init_post_alt_big_c));
+ fetch_idxdata(gspca_dev, tbl_init_post_alt_big3,
+ ARRAY_SIZE(tbl_init_post_alt_big3));
}
sd->vold.mirror = mirror;
diff --git a/drivers/media/video/gspca/gl860/gl860-ov2640.c b/drivers/media/video/gspca/gl860/gl860-ov2640.c
index 14b9c37..768cac5 100644
--- a/drivers/media/video/gspca/gl860/gl860-ov2640.c
+++ b/drivers/media/video/gspca/gl860/gl860-ov2640.c
@@ -1,6 +1,5 @@
-/* @file gl860-ov2640.c
- * @author Olivier LORIN, from Malmostoso's logs
- * @date 2009-08-27
+/* Subdriver for the GL860 chip with the OV2640 sensor
+ * Author Olivier LORIN, from Malmostoso's logs
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -21,8 +20,12 @@
#include "gl860.h"
static u8 dat_init1[] = "\x00\x41\x07\x6a\x06\x61\x0d\x6a" "\x10\x10\xc1\x01";
-static u8 dat_init2[] = {0x61}; /* expected */
-static u8 dat_init3[] = {0x51}; /* expected */
+
+static u8 c61[] = {0x61}; /* expected */
+static u8 c51[] = {0x51}; /* expected */
+static u8 c50[] = {0x50}; /* expected */
+static u8 c28[] = {0x28}; /* expected */
+static u8 ca8[] = {0xa8}; /* expected */
static u8 dat_post[] =
"\x00\x41\x07\x6a\x06\xef\x0d\x6a" "\x10\x10\xc1\x01";
@@ -32,10 +35,6 @@
static u8 dat_1280[] = "\xd0\x01\xd1\x18\xd2\xc0\xd3\x02\xd4\x28\xd5\x01";
static u8 dat_1600[] = "\xd0\x01\xd1\x20\xd2\xb0\xd3\x02\xd4\x30\xd5\x41";
-static u8 c50[] = {0x50}; /* expected */
-static u8 c28[] = {0x28}; /* expected */
-static u8 ca8[] = {0xa8}; /* expected */
-
static struct validx tbl_init_at_startup[] = {
{0x0000, 0x0000}, {0x0010, 0x0010}, {0x0008, 0x00c0}, {0x0001, 0x00c1},
{0x0001, 0x00c2}, {0x0020, 0x0006}, {0x006a, 0x000d},
@@ -92,7 +91,7 @@
{0x6000, 0x0010},
};
-static struct validx tbl_sensor_settings_common_a[] = {
+static struct validx tbl_sensor_settings_common1[] = {
{0x0041, 0x0000}, {0x006a, 0x0007}, {0x00ef, 0x0006}, {0x006a, 0x000d},
{0x0000, 0x00c0}, {0x0010, 0x0010}, {0x0001, 0x00c1}, {0x0041, 0x00c2},
{0x0004, 0x00d8}, {0x0012, 0x0004}, {0x0000, 0x0058}, {0x0041, 0x0000},
@@ -104,40 +103,10 @@
{0x0040, 0x0000},
};
-static struct validx tbl_sensor_settings_common_b[] = {
+static struct validx tbl_sensor_settings_common2[] = {
{0x6001, 0x00ff}, {0x6038, 0x000c},
{10, 0xffff},
{0x6000, 0x0011},
- /* backlight=31/64 */
- {0x6001, 0x00ff}, {0x603e, 0x0024}, {0x6034, 0x0025},
- /* bright=0/256 */
- {0x6000, 0x00ff}, {0x6009, 0x007c}, {0x6000, 0x007d},
- /* wbal=64/128 */
- {0x6000, 0x00ff}, {0x6003, 0x007c}, {0x6040, 0x007d},
- /* cntr=0/256 */
- {0x6000, 0x00ff}, {0x6007, 0x007c}, {0x6000, 0x007d},
- /* sat=128/256 */
- {0x6000, 0x00ff}, {0x6001, 0x007c}, {0x6080, 0x007d},
- /* sharpness=0/32 */
- {0x6000, 0x00ff}, {0x6001, 0x0092}, {0x60c0, 0x0093},
- /* hue=0/256 */
- {0x6000, 0x00ff}, {0x6002, 0x007c}, {0x6000, 0x007d},
- /* gam=32/64 */
- {0x6000, 0x00ff}, {0x6008, 0x007c}, {0x6020, 0x007d},
- /* image right up */
- {0xffff, 0xffff},
- {15, 0xffff},
- {0x6001, 0x00ff}, {0x6000, 0x8004},
- {0xffff, 0xffff},
- {0x60a8, 0x0004},
- {15, 0xffff},
- {0x6001, 0x00ff}, {0x6000, 0x8004},
- {0xffff, 0xffff},
- {0x60f8, 0x0004},
- /* image right up */
- {0xffff, 0xffff},
- /* backlight=31/64 */
- {0x6001, 0x00ff}, {0x603e, 0x0024}, {0x6034, 0x0025},
};
static struct validx tbl_640[] = {
@@ -166,7 +135,7 @@
{0x60ff, 0x00dd}, {0x6020, 0x008c}, {0x6001, 0x00ff}, {0x6044, 0x0018},
};
-static struct validx tbl_big_a[] = {
+static struct validx tbl_big1[] = {
{0x0002, 0x00c1}, {0x6000, 0x00ff}, {0x60f1, 0x00dd}, {0x6004, 0x00e0},
{0x6001, 0x00ff}, {0x6000, 0x0012}, {0x6000, 0x0000}, {0x6000, 0x0045},
{0x6000, 0x0010}, {0x6000, 0x0011}, {0x6011, 0x0017}, {0x6075, 0x0018},
@@ -176,14 +145,14 @@
{0x60c8, 0x00c0}, {0x6096, 0x00c1}, {0x6000, 0x008c},
};
-static struct validx tbl_big_b[] = {
+static struct validx tbl_big2[] = {
{0x603d, 0x0086}, {0x6000, 0x0050}, {0x6090, 0x0051}, {0x602c, 0x0052},
{0x6000, 0x0053}, {0x6000, 0x0054}, {0x6088, 0x0055}, {0x6000, 0x0057},
{0x6040, 0x005a}, {0x60f0, 0x005b}, {0x6001, 0x005c}, {0x6082, 0x00d3},
{0x6000, 0x008e},
};
-static struct validx tbl_big_c[] = {
+static struct validx tbl_big3[] = {
{0x6004, 0x00da}, {0x6000, 0x00e0}, {0x6067, 0x00e1}, {0x60ff, 0x00dd},
{0x6001, 0x00ff}, {0x6000, 0x00ff}, {0x60f1, 0x00dd}, {0x6004, 0x00e0},
{0x6001, 0x00ff}, {0x6000, 0x0011}, {0x6000, 0x00ff}, {0x6010, 0x00c7},
@@ -223,17 +192,19 @@
sd->vcur.hue = 0;
sd->vcur.saturation = 128;
sd->vcur.whitebal = 64;
+ sd->vcur.mirror = 0;
+ sd->vcur.flip = 0;
sd->vmax.backlight = 64;
sd->vmax.brightness = 255;
sd->vmax.sharpness = 31;
sd->vmax.contrast = 255;
sd->vmax.gamma = 64;
- sd->vmax.hue = 255 + 1;
+ sd->vmax.hue = 254 + 2;
sd->vmax.saturation = 255;
sd->vmax.whitebal = 128;
- sd->vmax.mirror = 0;
- sd->vmax.flip = 0;
+ sd->vmax.mirror = 1;
+ sd->vmax.flip = 1;
sd->vmax.AC50Hz = 0;
sd->dev_camera_settings = ov2640_camera_settings;
@@ -259,11 +230,11 @@
common(gspca_dev);
- ctrl_in(gspca_dev, 0xc0, 2, 0x0000, 0x0006, 1, dat_init2);
+ ctrl_in(gspca_dev, 0xc0, 2, 0x0000, 0x0006, 1, c61);
ctrl_out(gspca_dev, 0x40, 1, 0x00ef, 0x0006, 0, NULL);
- ctrl_in(gspca_dev, 0xc0, 2, 0x0000, 0x0000, 1, dat_init3);
+ ctrl_in(gspca_dev, 0xc0, 2, 0x0000, 0x0000, 1, c51);
ctrl_out(gspca_dev, 0x40, 1, 0x0051, 0x0000, 0, NULL);
/* ctrl_out(gspca_dev, 0x40, 11, 0x0000, 0x0000, 0, NULL); */
@@ -275,6 +246,8 @@
{
struct sd *sd = (struct sd *) gspca_dev;
+ sd->mirrorMask = 0;
+
sd->vold.backlight = -1;
sd->vold.brightness = -1;
sd->vold.sharpness = -1;
@@ -283,6 +256,8 @@
sd->vold.gamma = -1;
sd->vold.hue = -1;
sd->vold.whitebal = -1;
+ sd->vold.mirror = -1;
+ sd->vold.flip = -1;
ov2640_init_post_alt(gspca_dev);
@@ -292,16 +267,16 @@
static int ov2640_init_post_alt(struct gspca_dev *gspca_dev)
{
s32 reso = gspca_dev->cam.cam_mode[(s32) gspca_dev->curr_mode].priv;
- s32 n; /* reserved for FETCH macros */
+ s32 n; /* reserved for FETCH functions */
ctrl_out(gspca_dev, 0x40, 5, 0x0001, 0x0000, 0, NULL);
- n = fetch_validx(gspca_dev, tbl_sensor_settings_common_a,
- ARRAY_SIZE(tbl_sensor_settings_common_a));
+ n = fetch_validx(gspca_dev, tbl_sensor_settings_common1,
+ ARRAY_SIZE(tbl_sensor_settings_common1));
ctrl_out(gspca_dev, 0x40, 3, 0x0000, 0x0200, 12, dat_post);
common(gspca_dev);
- keep_on_fetching_validx(gspca_dev, tbl_sensor_settings_common_a,
- ARRAY_SIZE(tbl_sensor_settings_common_a), n);
+ keep_on_fetching_validx(gspca_dev, tbl_sensor_settings_common1,
+ ARRAY_SIZE(tbl_sensor_settings_common1), n);
switch (reso) {
case IMAGE_640:
@@ -316,18 +291,18 @@
case IMAGE_1600:
case IMAGE_1280:
- n = fetch_validx(gspca_dev, tbl_big_a, ARRAY_SIZE(tbl_big_a));
+ n = fetch_validx(gspca_dev, tbl_big1, ARRAY_SIZE(tbl_big1));
if (reso == IMAGE_1280) {
- n = fetch_validx(gspca_dev, tbl_big_b,
- ARRAY_SIZE(tbl_big_b));
+ n = fetch_validx(gspca_dev, tbl_big2,
+ ARRAY_SIZE(tbl_big2));
} else {
ctrl_out(gspca_dev, 0x40, 1, 0x601d, 0x0086, 0, NULL);
ctrl_out(gspca_dev, 0x40, 1, 0x6001, 0x00d7, 0, NULL);
ctrl_out(gspca_dev, 0x40, 1, 0x6082, 0x00d3, 0, NULL);
}
- n = fetch_validx(gspca_dev, tbl_big_c, ARRAY_SIZE(tbl_big_c));
+ n = fetch_validx(gspca_dev, tbl_big3, ARRAY_SIZE(tbl_big3));
if (reso == IMAGE_1280) {
ctrl_out(gspca_dev, 0x40, 1, 0x6001, 0x00ff, 0, NULL);
@@ -343,20 +318,8 @@
break;
}
- n = fetch_validx(gspca_dev, tbl_sensor_settings_common_b,
- ARRAY_SIZE(tbl_sensor_settings_common_b));
- ctrl_in(gspca_dev, 0xc0, 2, 0x0000, 0x0000, 1, c50);
- keep_on_fetching_validx(gspca_dev, tbl_sensor_settings_common_b,
- ARRAY_SIZE(tbl_sensor_settings_common_b), n);
- ctrl_in(gspca_dev, 0xc0, 2, 0x6000, 0x8004, 1, c28);
- keep_on_fetching_validx(gspca_dev, tbl_sensor_settings_common_b,
- ARRAY_SIZE(tbl_sensor_settings_common_b), n);
- ctrl_in(gspca_dev, 0xc0, 2, 0x6000, 0x8004, 1, ca8);
- keep_on_fetching_validx(gspca_dev, tbl_sensor_settings_common_b,
- ARRAY_SIZE(tbl_sensor_settings_common_b), n);
- ctrl_in(gspca_dev, 0xc0, 2, 0x0000, 0x0000, 1, c50);
- keep_on_fetching_validx(gspca_dev, tbl_sensor_settings_common_b,
- ARRAY_SIZE(tbl_sensor_settings_common_b), n);
+ n = fetch_validx(gspca_dev, tbl_sensor_settings_common2,
+ ARRAY_SIZE(tbl_sensor_settings_common2));
ov2640_camera_settings(gspca_dev);
@@ -393,18 +356,20 @@
s32 sat = sd->vcur.saturation;
s32 hue = sd->vcur.hue;
s32 wbal = sd->vcur.whitebal;
+ s32 mirror = (((sd->vcur.mirror > 0) ^ sd->mirrorMask) == 0);
+ s32 flip = (((sd->vcur.flip > 0) ^ sd->mirrorMask) == 0);
if (backlight != sd->vold.backlight) {
+ /* No sd->vold.backlight=backlight; (to be done again later) */
if (backlight < 0 || backlight > sd->vmax.backlight)
backlight = 0;
ctrl_out(gspca_dev, 0x40, 1, 0x6001 , 0x00ff,
0, NULL);
- ctrl_out(gspca_dev, 0x40, 1, 0x601f + backlight , 0x0024,
+ ctrl_out(gspca_dev, 0x40, 1, 0x601e + backlight , 0x0024,
0, NULL);
- ctrl_out(gspca_dev, 0x40, 1, 0x601f + backlight - 10, 0x0025,
+ ctrl_out(gspca_dev, 0x40, 1, 0x601e + backlight - 10, 0x0025,
0, NULL);
- /* No sd->vold.backlight=backlight; (to be done again later) */
}
if (bright != sd->vold.brightness) {
@@ -466,7 +431,7 @@
ctrl_out(gspca_dev, 0x40, 1, 0x6002 , 0x007c, 0, NULL);
ctrl_out(gspca_dev, 0x40, 1, 0x6000 + hue * (hue < 255), 0x007d,
0, NULL);
- if (hue >= sd->vmax.hue)
+ if (hue >= 255)
sd->swapRB = 1;
else
sd->swapRB = 0;
@@ -482,14 +447,33 @@
ctrl_out(gspca_dev, 0x40, 1, 0x6000 + gam, 0x007d, 0, NULL);
}
+ if (mirror != sd->vold.mirror || flip != sd->vold.flip) {
+ sd->vold.mirror = mirror;
+ sd->vold.flip = flip;
+
+ mirror = 0x80 * mirror;
+ ctrl_out(gspca_dev, 0x40, 1, 0x6001, 0x00ff, 0, NULL);
+ ctrl_out(gspca_dev, 0x40, 1, 0x6000, 0x8004, 0, NULL);
+ ctrl_in(gspca_dev, 0xc0, 2, 0x6000, 0x8004, 1, c28);
+ ctrl_out(gspca_dev, 0x40, 1, 0x6028 + mirror, 0x0004, 0, NULL);
+
+ flip = 0x50 * flip + mirror;
+ ctrl_out(gspca_dev, 0x40, 1, 0x6001, 0x00ff, 0, NULL);
+ ctrl_out(gspca_dev, 0x40, 1, 0x6000, 0x8004, 0, NULL);
+ ctrl_in(gspca_dev, 0xc0, 2, 0x6000, 0x8004, 1, ca8);
+ ctrl_out(gspca_dev, 0x40, 1, 0x6028 + flip, 0x0004, 0, NULL);
+
+ ctrl_in(gspca_dev, 0xc0, 2, 0x0000, 0x0000, 1, c50);
+ }
+
if (backlight != sd->vold.backlight) {
sd->vold.backlight = backlight;
ctrl_out(gspca_dev, 0x40, 1, 0x6001 , 0x00ff,
0, NULL);
- ctrl_out(gspca_dev, 0x40, 1, 0x601f + backlight , 0x0024,
+ ctrl_out(gspca_dev, 0x40, 1, 0x601e + backlight , 0x0024,
0, NULL);
- ctrl_out(gspca_dev, 0x40, 1, 0x601f + backlight - 10, 0x0025,
+ ctrl_out(gspca_dev, 0x40, 1, 0x601e + backlight - 10, 0x0025,
0, NULL);
}
diff --git a/drivers/media/video/gspca/gl860/gl860-ov9655.c b/drivers/media/video/gspca/gl860/gl860-ov9655.c
index eda3346..d412694 100644
--- a/drivers/media/video/gspca/gl860/gl860-ov9655.c
+++ b/drivers/media/video/gspca/gl860/gl860-ov9655.c
@@ -1,7 +1,6 @@
-/* @file gl860-ov9655.c
- * @author Olivier LORIN, from logs done by Simon (Sur3) and Almighurt
+/* Subdriver for the GL860 chip with the OV9655 sensor
+ * Author Olivier LORIN, from logs done by Simon (Sur3) and Almighurt
* on dsd's weblog
- * @date 2009-08-27
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -104,14 +103,14 @@
};
static u8 c04[] = {0x04};
-static u8 dat_post_1[] = "\x04\x00\x10\x20\xa1\x00\x00\x02";
-static u8 dat_post_2[] = "\x10\x10\xc1\x02";
-static u8 dat_post_3[] = "\x04\x00\x10\x7c\xa1\x00\x00\x04";
-static u8 dat_post_4[] = "\x10\x02\xc1\x06";
-static u8 dat_post_5[] = "\x04\x00\x10\x7b\xa1\x00\x00\x08";
-static u8 dat_post_6[] = "\x10\x10\xc1\x05";
-static u8 dat_post_7[] = "\x04\x00\x10\x7c\xa1\x00\x00\x08";
-static u8 dat_post_8[] = "\x04\x00\x10\x7c\xa1\x00\x00\x09";
+static u8 dat_post1[] = "\x04\x00\x10\x20\xa1\x00\x00\x02";
+static u8 dat_post2[] = "\x10\x10\xc1\x02";
+static u8 dat_post3[] = "\x04\x00\x10\x7c\xa1\x00\x00\x04";
+static u8 dat_post4[] = "\x10\x02\xc1\x06";
+static u8 dat_post5[] = "\x04\x00\x10\x7b\xa1\x00\x00\x08";
+static u8 dat_post6[] = "\x10\x10\xc1\x05";
+static u8 dat_post7[] = "\x04\x00\x10\x7c\xa1\x00\x00\x08";
+static u8 dat_post8[] = "\x04\x00\x10\x7c\xa1\x00\x00\x09";
static struct validx tbl_init_post_alt[] = {
{0x6032, 0x00ff}, {0x6032, 0x00ff}, {0x6032, 0x00ff}, {0x603c, 0x00ff},
@@ -212,7 +211,7 @@
static int ov9655_init_post_alt(struct gspca_dev *gspca_dev)
{
s32 reso = gspca_dev->cam.cam_mode[(s32) gspca_dev->curr_mode].priv;
- s32 n; /* reserved for FETCH macros */
+ s32 n; /* reserved for FETCH functions */
s32 i;
u8 **tbl;
@@ -243,7 +242,7 @@
ctrl_in(gspca_dev, 0xc0, 2, 0x6000, 0x801e, 1, c04);
keep_on_fetching_validx(gspca_dev, tbl_init_post_alt,
ARRAY_SIZE(tbl_init_post_alt), n);
- ctrl_out(gspca_dev, 0x40, 3, 0x6000, 0x0200, 8, dat_post_1);
+ ctrl_out(gspca_dev, 0x40, 3, 0x6000, 0x0200, 8, dat_post1);
keep_on_fetching_validx(gspca_dev, tbl_init_post_alt,
ARRAY_SIZE(tbl_init_post_alt), n);
@@ -259,7 +258,7 @@
ctrl_in(gspca_dev, 0xc0, 2, 0x6000, 0x801e, 1, c04);
keep_on_fetching_validx(gspca_dev, tbl_init_post_alt,
ARRAY_SIZE(tbl_init_post_alt), n);
- ctrl_out(gspca_dev, 0x40, 3, 0x6000, 0x0200, 8, dat_post_1);
+ ctrl_out(gspca_dev, 0x40, 3, 0x6000, 0x0200, 8, dat_post1);
keep_on_fetching_validx(gspca_dev, tbl_init_post_alt,
ARRAY_SIZE(tbl_init_post_alt), n);
@@ -270,18 +269,18 @@
keep_on_fetching_validx(gspca_dev, tbl_init_post_alt,
ARRAY_SIZE(tbl_init_post_alt), n);
- ctrl_out(gspca_dev, 0x40, 3, 0x6000, 0x0200, 8, dat_post_1);
+ ctrl_out(gspca_dev, 0x40, 3, 0x6000, 0x0200, 8, dat_post1);
- ctrl_out(gspca_dev, 0x40, 3, 0x0000, 0x0200, 4, dat_post_2);
- ctrl_out(gspca_dev, 0x40, 3, 0x6000, 0x0200, 8, dat_post_3);
+ ctrl_out(gspca_dev, 0x40, 3, 0x0000, 0x0200, 4, dat_post2);
+ ctrl_out(gspca_dev, 0x40, 3, 0x6000, 0x0200, 8, dat_post3);
- ctrl_out(gspca_dev, 0x40, 3, 0x0000, 0x0200, 4, dat_post_4);
- ctrl_out(gspca_dev, 0x40, 3, 0x6000, 0x0200, 8, dat_post_5);
+ ctrl_out(gspca_dev, 0x40, 3, 0x0000, 0x0200, 4, dat_post4);
+ ctrl_out(gspca_dev, 0x40, 3, 0x6000, 0x0200, 8, dat_post5);
- ctrl_out(gspca_dev, 0x40, 3, 0x0000, 0x0200, 4, dat_post_6);
- ctrl_out(gspca_dev, 0x40, 3, 0x6000, 0x0200, 8, dat_post_7);
+ ctrl_out(gspca_dev, 0x40, 3, 0x0000, 0x0200, 4, dat_post6);
+ ctrl_out(gspca_dev, 0x40, 3, 0x6000, 0x0200, 8, dat_post7);
- ctrl_out(gspca_dev, 0x40, 3, 0x6000, 0x0200, 8, dat_post_8);
+ ctrl_out(gspca_dev, 0x40, 3, 0x6000, 0x0200, 8, dat_post8);
ov9655_camera_settings(gspca_dev);
diff --git a/drivers/media/video/gspca/gl860/gl860.c b/drivers/media/video/gspca/gl860/gl860.c
index 6ef59ac..a695e0a 100644
--- a/drivers/media/video/gspca/gl860/gl860.c
+++ b/drivers/media/video/gspca/gl860/gl860.c
@@ -1,9 +1,7 @@
-/* @file gl860.c
- * @date 2009-08-27
+/* GSPCA subdrivers for Genesys Logic webcams with the GL860 chip
+ * Subdriver core
*
- * Genesys Logic webcam with gl860 subdrivers
- *
- * Driver by Olivier Lorin <o.lorin@laposte.net>
+ * 2009/09/24 Olivier Lorin <o.lorin@laposte.net>
* GSPCA by Jean-Francois Moine <http://moinejf.free.fr>
* Thanks BUGabundo and Malmostoso for your amazing help!
*
@@ -23,8 +21,8 @@
#include "gspca.h"
#include "gl860.h"
-MODULE_AUTHOR("Olivier Lorin <lorin@laposte.net>");
-MODULE_DESCRIPTION("GSPCA/Genesys Logic GL860 USB Camera Driver");
+MODULE_AUTHOR("Olivier Lorin <o.lorin@laposte.net>");
+MODULE_DESCRIPTION("Genesys Logic USB PC Camera Driver");
MODULE_LICENSE("GPL");
/*======================== static function declarations ====================*/
@@ -38,7 +36,7 @@
static int sd_start(struct gspca_dev *gspca_dev);
static void sd_stop0(struct gspca_dev *gspca_dev);
static void sd_pkt_scan(struct gspca_dev *gspca_dev,
- struct gspca_frame *frame, u8 *data, s32 len);
+ u8 *data, int len);
static void sd_callback(struct gspca_dev *gspca_dev);
static int gl860_guess_sensor(struct gspca_dev *gspca_dev,
@@ -53,7 +51,7 @@
static char sensor[7];
module_param_string(sensor, sensor, sizeof(sensor), 0644);
MODULE_PARM_DESC(sensor,
- " Driver sensor ('MI1320'/'MI2020'/'OV9655'/'OV2640'/'')");
+ " Driver sensor ('MI1320'/'MI2020'/'OV9655'/'OV2640')");
/*============================ webcam controls =============================*/
@@ -156,7 +154,7 @@
SET_MY_CTRL(V4L2_CID_VFLIP,
V4L2_CTRL_TYPE_BOOLEAN, "Flip", flip)
SET_MY_CTRL(V4L2_CID_POWER_LINE_FREQUENCY,
- V4L2_CTRL_TYPE_BOOLEAN, "50Hz", AC50Hz)
+ V4L2_CTRL_TYPE_BOOLEAN, "AC power 50Hz", AC50Hz)
return nCtrls;
}
@@ -435,7 +433,7 @@
/* This function is called when an image is being received */
static void sd_pkt_scan(struct gspca_dev *gspca_dev,
- struct gspca_frame *frame, u8 *data, s32 len)
+ u8 *data, int len)
{
struct sd *sd = (struct sd *) gspca_dev;
static s32 nSkipped;
@@ -447,11 +445,11 @@
/* Test only against 0202h, so endianess does not matter */
switch (*(s16 *) data) {
case 0x0202: /* End of frame, start a new one */
- frame = gspca_frame_add(gspca_dev, LAST_PACKET, frame, data, 0);
+ gspca_frame_add(gspca_dev, LAST_PACKET, NULL, 0);
nSkipped = 0;
if (sd->nbIm >= 0 && sd->nbIm < 10)
sd->nbIm++;
- gspca_frame_add(gspca_dev, FIRST_PACKET, frame, data, 0);
+ gspca_frame_add(gspca_dev, FIRST_PACKET, NULL, 0);
break;
default:
@@ -466,7 +464,7 @@
nSkipped = nToSkip + 1;
}
gspca_frame_add(gspca_dev,
- INTER_PACKET, frame, data, len);
+ INTER_PACKET, data, len);
}
break;
}
@@ -702,6 +700,7 @@
ctrl_out(gspca_dev, 0x40, 1, 0x006a, 0x000d, 0, NULL);
msleep(56);
+ PDEBUG(D_PROBE, "probing for sensor MI2020 or OVXXXX");
nOV = 0;
for (ntry = 0; ntry < 4; ntry++) {
ctrl_out(gspca_dev, 0x40, 1, 0x0040, 0x0000, 0, NULL);
@@ -711,14 +710,14 @@
ctrl_out(gspca_dev, 0x40, 1, 0x7a00, 0x8030, 0, NULL);
msleep(10);
ctrl_in(gspca_dev, 0xc0, 2, 0x7a00, 0x8030, 1, &probe);
- PDEBUG(D_PROBE, "1st probe=%02x", probe);
+ PDEBUG(D_PROBE, "probe=0x%02x", probe);
if (probe == 0xff)
nOV++;
}
if (nOV) {
- PDEBUG(D_PROBE, "0xff -> sensor OVXXXX");
- PDEBUG(D_PROBE, "Probing for sensor OV2640 or OV9655");
+ PDEBUG(D_PROBE, "0xff -> OVXXXX");
+ PDEBUG(D_PROBE, "probing for sensor OV2640 or OV9655");
nb26 = nb96 = 0;
for (ntry = 0; ntry < 4; ntry++) {
@@ -728,40 +727,38 @@
ctrl_out(gspca_dev, 0x40, 1, 0x6000, 0x800a,
0, NULL);
msleep(10);
+
/* Wait for 26(OV2640) or 96(OV9655) */
ctrl_in(gspca_dev, 0xc0, 2, 0x6000, 0x800a,
1, &probe);
- PDEBUG(D_PROBE, "2nd probe=%02x", probe);
- if (probe == 0x00)
- nb26++;
if (probe == 0x26 || probe == 0x40) {
+ PDEBUG(D_PROBE,
+ "probe=0x%02x -> OV2640",
+ probe);
sd->sensor = ID_OV2640;
nb26 += 4;
break;
}
if (probe == 0x96 || probe == 0x55) {
+ PDEBUG(D_PROBE,
+ "probe=0x%02x -> OV9655",
+ probe);
sd->sensor = ID_OV9655;
nb96 += 4;
break;
}
+ PDEBUG(D_PROBE, "probe=0x%02x", probe);
+ if (probe == 0x00)
+ nb26++;
if (probe == 0xff)
nb96++;
msleep(3);
}
- if (nb26 < 4 && nb96 < 4) {
- PDEBUG(D_PROBE, "No relevant answer ");
- PDEBUG(D_PROBE, "* 1.3Mpixels -> use OV9655");
- PDEBUG(D_PROBE, "* 2.0Mpixels -> use OV2640");
- PDEBUG(D_PROBE,
- "To force a sensor, add that line to "
- "/etc/modprobe.d/options.conf:");
- PDEBUG(D_PROBE, "options gspca_gl860 "
- "sensor=\"OV2640\" or \"OV9655\"");
+ if (nb26 < 4 && nb96 < 4)
return -1;
- }
- } else { /* probe = 0 */
- PDEBUG(D_PROBE, "No 0xff -> sensor MI2020");
+ } else {
+ PDEBUG(D_PROBE, "Not any 0xff -> MI2020");
sd->sensor = ID_MI2020;
}
}
diff --git a/drivers/media/video/gspca/gl860/gl860.h b/drivers/media/video/gspca/gl860/gl860.h
index cef4e24..305061f 100644
--- a/drivers/media/video/gspca/gl860/gl860.h
+++ b/drivers/media/video/gspca/gl860/gl860.h
@@ -1,6 +1,7 @@
-/* @file gl860.h
- * @author Olivier LORIN, tiré du pilote Syntek par Nicolas VIVIEN
- * @date 2009-08-27
+/* GSPCA subdrivers for Genesys Logic webcams with the GL860 chip
+ * Subdriver declarations
+ *
+ * 2009/10/14 Olivier LORIN <o.lorin@laposte.net>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c
index 23d3fb7..4076f8e 100644
--- a/drivers/media/video/gspca/gspca.c
+++ b/drivers/media/video/gspca/gspca.c
@@ -47,7 +47,7 @@
MODULE_DESCRIPTION("GSPCA USB Camera Driver");
MODULE_LICENSE("GPL");
-#define DRIVER_VERSION_NUMBER KERNEL_VERSION(2, 7, 0)
+#define DRIVER_VERSION_NUMBER KERNEL_VERSION(2, 8, 0)
#ifdef GSPCA_DEBUG
int gspca_debug = D_ERR | D_PROBE;
@@ -74,7 +74,7 @@
#define PDEBUG_MODE(txt, pixfmt, w, h)
#endif
-/* specific memory types - !! should different from V4L2_MEMORY_xxx */
+/* specific memory types - !! should be different from V4L2_MEMORY_xxx */
#define GSPCA_MEMORY_NO 0 /* V4L2_MEMORY_xxx starts from 1 */
#define GSPCA_MEMORY_READ 7
@@ -126,7 +126,6 @@
static void fill_frame(struct gspca_dev *gspca_dev,
struct urb *urb)
{
- struct gspca_frame *frame;
u8 *data; /* address of data in the iso message */
int i, len, st;
cam_pkt_op pkt_scan;
@@ -135,21 +134,16 @@
if (urb->status == -ESHUTDOWN)
return; /* disconnection */
#ifdef CONFIG_PM
- if (!gspca_dev->frozen)
+ if (gspca_dev->frozen)
+ return;
#endif
- PDEBUG(D_ERR|D_PACK, "urb status: %d", urb->status);
- return;
+ PDEBUG(D_ERR|D_PACK, "urb status: %d", urb->status);
+ urb->status = 0;
+ goto resubmit;
}
pkt_scan = gspca_dev->sd_desc->pkt_scan;
for (i = 0; i < urb->number_of_packets; i++) {
- /* check the availability of the frame buffer */
- frame = gspca_get_i_frame(gspca_dev);
- if (!frame) {
- gspca_dev->last_packet_type = DISCARD_PACKET;
- break;
- }
-
/* check the packet status and length */
len = urb->iso_frame_desc[i].actual_length;
if (len == 0) {
@@ -171,9 +165,10 @@
i, urb->iso_frame_desc[i].offset, len);
data = (u8 *) urb->transfer_buffer
+ urb->iso_frame_desc[i].offset;
- pkt_scan(gspca_dev, frame, data, len);
+ pkt_scan(gspca_dev, data, len);
}
+resubmit:
/* resubmit the URB */
st = usb_submit_urb(urb, GFP_ATOMIC);
if (st < 0)
@@ -201,7 +196,6 @@
static void bulk_irq(struct urb *urb)
{
struct gspca_dev *gspca_dev = (struct gspca_dev *) urb->context;
- struct gspca_frame *frame;
int st;
PDEBUG(D_PACK, "bulk irq");
@@ -212,29 +206,22 @@
break;
case -ESHUTDOWN:
return; /* disconnection */
- case -ECONNRESET:
- urb->status = 0;
- break;
default:
#ifdef CONFIG_PM
- if (!gspca_dev->frozen)
+ if (gspca_dev->frozen)
+ return;
#endif
- PDEBUG(D_ERR|D_PACK, "urb status: %d", urb->status);
- return;
+ PDEBUG(D_ERR|D_PACK, "urb status: %d", urb->status);
+ urb->status = 0;
+ goto resubmit;
}
- /* check the availability of the frame buffer */
- frame = gspca_get_i_frame(gspca_dev);
- if (!frame) {
- gspca_dev->last_packet_type = DISCARD_PACKET;
- } else {
- PDEBUG(D_PACK, "packet l:%d", urb->actual_length);
- gspca_dev->sd_desc->pkt_scan(gspca_dev,
- frame,
- urb->transfer_buffer,
- urb->actual_length);
- }
+ PDEBUG(D_PACK, "packet l:%d", urb->actual_length);
+ gspca_dev->sd_desc->pkt_scan(gspca_dev,
+ urb->transfer_buffer,
+ urb->actual_length);
+resubmit:
/* resubmit the URB */
if (gspca_dev->cam.bulk_nurbs != 0) {
st = usb_submit_urb(urb, GFP_ATOMIC);
@@ -255,24 +242,27 @@
* DISCARD_PACKET invalidates the whole frame.
* On LAST_PACKET, a new frame is returned.
*/
-struct gspca_frame *gspca_frame_add(struct gspca_dev *gspca_dev,
- enum gspca_packet_type packet_type,
- struct gspca_frame *frame,
- const __u8 *data,
- int len)
+void gspca_frame_add(struct gspca_dev *gspca_dev,
+ enum gspca_packet_type packet_type,
+ const u8 *data,
+ int len)
{
+ struct gspca_frame *frame;
int i, j;
PDEBUG(D_PACK, "add t:%d l:%d", packet_type, len);
+ /* check the availability of the frame buffer */
+ frame = gspca_dev->cur_frame;
+ if ((frame->v4l2_buf.flags & BUF_ALL_FLAGS)
+ != V4L2_BUF_FLAG_QUEUED) {
+ gspca_dev->last_packet_type = DISCARD_PACKET;
+ return;
+ }
+
/* when start of a new frame, if the current frame buffer
* is not queued, discard the whole frame */
if (packet_type == FIRST_PACKET) {
- if ((frame->v4l2_buf.flags & BUF_ALL_FLAGS)
- != V4L2_BUF_FLAG_QUEUED) {
- gspca_dev->last_packet_type = DISCARD_PACKET;
- return frame;
- }
frame->data_end = frame->data;
jiffies_to_timeval(get_jiffies_64(),
&frame->v4l2_buf.timestamp);
@@ -280,7 +270,7 @@
} else if (gspca_dev->last_packet_type == DISCARD_PACKET) {
if (packet_type == LAST_PACKET)
gspca_dev->last_packet_type = packet_type;
- return frame;
+ return;
}
/* append the packet to the frame buffer */
@@ -312,9 +302,9 @@
i,
gspca_dev->fr_o);
j = gspca_dev->fr_queue[i];
- frame = &gspca_dev->frame[j];
+ gspca_dev->cur_frame = &gspca_dev->frame[j];
}
- return frame;
+ return;
}
EXPORT_SYMBOL(gspca_frame_add);
@@ -395,6 +385,7 @@
frame->v4l2_buf.m.offset = i * frsz;
}
gspca_dev->fr_i = gspca_dev->fr_o = gspca_dev->fr_q = 0;
+ gspca_dev->cur_frame = &gspca_dev->frame[0];
gspca_dev->last_packet_type = DISCARD_PACKET;
gspca_dev->sequence = 0;
return 0;
@@ -475,10 +466,18 @@
xfer = gspca_dev->cam.bulk ? USB_ENDPOINT_XFER_BULK
: USB_ENDPOINT_XFER_ISOC;
i = gspca_dev->alt; /* previous alt setting */
- while (--i >= 0) {
- ep = alt_xfer(&intf->altsetting[i], xfer);
- if (ep)
- break;
+ if (gspca_dev->cam.reverse_alts) {
+ while (++i < gspca_dev->nbalt) {
+ ep = alt_xfer(&intf->altsetting[i], xfer);
+ if (ep)
+ break;
+ }
+ } else {
+ while (--i >= 0) {
+ ep = alt_xfer(&intf->altsetting[i], xfer);
+ if (ep)
+ break;
+ }
}
if (ep == NULL) {
err("no transfer endpoint found");
@@ -599,7 +598,11 @@
/* set the higher alternate setting and
* loop until urb submit succeeds */
- gspca_dev->alt = gspca_dev->nbalt;
+ if (gspca_dev->cam.reverse_alts)
+ gspca_dev->alt = 0;
+ else
+ gspca_dev->alt = gspca_dev->nbalt;
+
if (gspca_dev->sd_desc->isoc_init) {
ret = gspca_dev->sd_desc->isoc_init(gspca_dev);
if (ret < 0)
@@ -641,15 +644,19 @@
}
if (ret >= 0)
break;
- PDEBUG(D_ERR|D_STREAM,
- "usb_submit_urb alt %d err %d", gspca_dev->alt, ret);
gspca_dev->streaming = 0;
destroy_urbs(gspca_dev);
- if (ret != -ENOSPC)
+ if (ret != -ENOSPC) {
+ PDEBUG(D_ERR|D_STREAM,
+ "usb_submit_urb alt %d err %d",
+ gspca_dev->alt, ret);
goto out;
+ }
/* the bandwidth is not wide enough
* negociate or try a lower alternate setting */
+ PDEBUG(D_ERR|D_STREAM,
+ "bandwidth not wide enough - trying again");
msleep(20); /* wait for kill complete */
if (gspca_dev->sd_desc->isoc_nego) {
ret = gspca_dev->sd_desc->isoc_nego(gspca_dev);
@@ -980,7 +987,7 @@
{
struct gspca_dev *gspca_dev = container_of(vfd, struct gspca_dev, vdev);
- PDEBUG(D_STREAM, "device released");
+ PDEBUG(D_PROBE, "/dev/video%d released", gspca_dev->vdev.num);
kfree(gspca_dev->usb_buf);
kfree(gspca_dev);
@@ -991,7 +998,7 @@
struct gspca_dev *gspca_dev;
int ret;
- PDEBUG(D_STREAM, "%s open", current->comm);
+ PDEBUG(D_STREAM, "[%s] open", current->comm);
gspca_dev = (struct gspca_dev *) video_devdata(file);
if (mutex_lock_interruptible(&gspca_dev->queue_lock))
return -ERESTARTSYS;
@@ -1037,7 +1044,7 @@
{
struct gspca_dev *gspca_dev = file->private_data;
- PDEBUG(D_STREAM, "%s close", current->comm);
+ PDEBUG(D_STREAM, "[%s] close", current->comm);
if (mutex_lock_interruptible(&gspca_dev->queue_lock))
return -ERESTARTSYS;
gspca_dev->users--;
@@ -1138,10 +1145,13 @@
}
} else {
ctrls = get_ctrl(gspca_dev, id);
+ i = ctrls - gspca_dev->sd_desc->ctrls;
}
if (ctrls == NULL)
return -EINVAL;
memcpy(q_ctrl, ctrls, sizeof *q_ctrl);
+ if (gspca_dev->ctrl_inac & (1 << i))
+ q_ctrl->flags |= V4L2_CTRL_FLAG_INACTIVE;
return 0;
}
@@ -1603,7 +1613,7 @@
size -= PAGE_SIZE;
}
- vma->vm_ops = &gspca_vm_ops;
+ vma->vm_ops = (struct vm_operations_struct *) &gspca_vm_ops;
vma->vm_private_data = frame;
gspca_vm_open(vma);
ret = 0;
@@ -2001,11 +2011,15 @@
PDEBUG(D_PROBE, "probing %04x:%04x", id->idVendor, id->idProduct);
/* we don't handle multi-config cameras */
- if (dev->descriptor.bNumConfigurations != 1)
+ if (dev->descriptor.bNumConfigurations != 1) {
+ PDEBUG(D_ERR, "Too many config");
return -ENODEV;
+ }
interface = &intf->cur_altsetting->desc;
- if (interface->bInterfaceNumber > 0)
+ if (interface->bInterfaceNumber > 0) {
+ PDEBUG(D_ERR, "intf != 0");
return -ENODEV;
+ }
/* create the device */
if (dev_size < sizeof *gspca_dev)
@@ -2059,7 +2073,7 @@
}
usb_set_intfdata(intf, gspca_dev);
- PDEBUG(D_PROBE, "probe ok");
+ PDEBUG(D_PROBE, "/dev/video%d created", gspca_dev->vdev.num);
return 0;
out:
kfree(gspca_dev->usb_buf);
@@ -2078,6 +2092,7 @@
{
struct gspca_dev *gspca_dev = usb_get_intfdata(intf);
+ PDEBUG(D_PROBE, "/dev/video%d disconnect", gspca_dev->vdev.num);
mutex_lock(&gspca_dev->usb_lock);
gspca_dev->present = 0;
@@ -2096,7 +2111,7 @@
/* (this will call gspca_release() immediatly or on last close) */
video_unregister_device(&gspca_dev->vdev);
- PDEBUG(D_PROBE, "disconnect complete");
+/* PDEBUG(D_PROBE, "disconnect complete"); */
}
EXPORT_SYMBOL(gspca_disconnect);
diff --git a/drivers/media/video/gspca/gspca.h b/drivers/media/video/gspca/gspca.h
index 70b1fd8..1816173 100644
--- a/drivers/media/video/gspca/gspca.h
+++ b/drivers/media/video/gspca/gspca.h
@@ -58,6 +58,7 @@
u8 npkt; /* number of packets in an ISOC message
* 0 is the default value: 32 packets */
u32 input_flags; /* value for ENUM_INPUT status flags */
+ char reverse_alts; /* Alt settings are in high to low order */
};
struct gspca_dev;
@@ -78,8 +79,7 @@
typedef int (*cam_qmnu_op) (struct gspca_dev *,
struct v4l2_querymenu *);
typedef void (*cam_pkt_op) (struct gspca_dev *gspca_dev,
- struct gspca_frame *frame,
- __u8 *data,
+ u8 *data,
int len);
struct ctrl {
@@ -142,6 +142,7 @@
struct cam cam; /* device information */
const struct sd_desc *sd_desc; /* subdriver description */
unsigned ctrl_dis; /* disabled controls (bit map) */
+ unsigned ctrl_inac; /* inactive controls (bit map) */
#define USB_BUF_SZ 64
__u8 *usb_buf; /* buffer for USB exchanges */
@@ -149,6 +150,7 @@
__u8 *frbuf; /* buffer for nframes */
struct gspca_frame frame[GSPCA_MAX_FRAMES];
+ struct gspca_frame *cur_frame; /* frame beeing filled */
__u32 frsz; /* frame size */
char nframes; /* number of frames */
char fr_i; /* frame being filled */
@@ -189,11 +191,10 @@
int dev_size,
struct module *module);
void gspca_disconnect(struct usb_interface *intf);
-struct gspca_frame *gspca_frame_add(struct gspca_dev *gspca_dev,
- enum gspca_packet_type packet_type,
- struct gspca_frame *frame,
- const __u8 *data,
- int len);
+void gspca_frame_add(struct gspca_dev *gspca_dev,
+ enum gspca_packet_type packet_type,
+ const u8 *data,
+ int len);
struct gspca_frame *gspca_get_i_frame(struct gspca_dev *gspca_dev);
#ifdef CONFIG_PM
int gspca_suspend(struct usb_interface *intf, pm_message_t message);
diff --git a/drivers/media/video/gspca/jeilinj.c b/drivers/media/video/gspca/jeilinj.c
index a11c97e..2019b04 100644
--- a/drivers/media/video/gspca/jeilinj.c
+++ b/drivers/media/video/gspca/jeilinj.c
@@ -181,11 +181,9 @@
{
struct sd *dev = container_of(work, struct sd, work_struct);
struct gspca_dev *gspca_dev = &dev->gspca_dev;
- struct gspca_frame *frame;
int blocks_left; /* 0x200-sized blocks remaining in current frame. */
int size_in_blocks;
int act_len;
- int discarding = 0; /* true if we failed to get space for frame. */
int packet_type;
int ret;
u8 *buffer;
@@ -196,15 +194,6 @@
goto quit_stream;
}
while (gspca_dev->present && gspca_dev->streaming) {
- if (!gspca_dev->present)
- goto quit_stream;
- /* Start a new frame, and add the JPEG header, first thing */
- frame = gspca_get_i_frame(gspca_dev);
- if (frame && !discarding)
- gspca_frame_add(gspca_dev, FIRST_PACKET, frame,
- dev->jpeg_hdr, JPEG_HDR_SZ);
- else
- discarding = 1;
/*
* Now request data block 0. Line 0 reports the size
* to download, in blocks of size 0x200, and also tells the
@@ -222,14 +211,15 @@
size_in_blocks = buffer[0x0a];
blocks_left = buffer[0x0a] - 1;
PDEBUG(D_STREAM, "blocks_left = 0x%x", blocks_left);
- packet_type = INTER_PACKET;
- if (frame && !discarding)
- /* Toss line 0 of data block 0, keep the rest. */
- gspca_frame_add(gspca_dev, packet_type,
- frame, buffer + FRAME_HEADER_LEN,
+
+ /* Start a new frame, and add the JPEG header, first thing */
+ gspca_frame_add(gspca_dev, FIRST_PACKET,
+ dev->jpeg_hdr, JPEG_HDR_SZ);
+ /* Toss line 0 of data block 0, keep the rest. */
+ gspca_frame_add(gspca_dev, INTER_PACKET,
+ buffer + FRAME_HEADER_LEN,
JEILINJ_MAX_TRANSFER - FRAME_HEADER_LEN);
- else
- discarding = 1;
+
while (blocks_left > 0) {
if (!gspca_dev->present)
goto quit_stream;
@@ -246,12 +236,8 @@
packet_type = LAST_PACKET;
else
packet_type = INTER_PACKET;
- if (frame && !discarding)
- gspca_frame_add(gspca_dev, packet_type,
- frame, buffer,
- JEILINJ_MAX_TRANSFER);
- else
- discarding = 1;
+ gspca_frame_add(gspca_dev, packet_type,
+ buffer, JEILINJ_MAX_TRANSFER);
}
}
quit_stream:
diff --git a/drivers/media/video/gspca/m5602/m5602_core.c b/drivers/media/video/gspca/m5602/m5602_core.c
index 7f1e541..844fc1d 100644
--- a/drivers/media/video/gspca/m5602/m5602_core.c
+++ b/drivers/media/video/gspca/m5602/m5602_core.c
@@ -274,8 +274,7 @@
}
static void m5602_urb_complete(struct gspca_dev *gspca_dev,
- struct gspca_frame *frame,
- __u8 *data, int len)
+ u8 *data, int len)
{
struct sd *sd = (struct sd *) gspca_dev;
@@ -295,19 +294,27 @@
len -= 6;
/* Complete the last frame (if any) */
- frame = gspca_frame_add(gspca_dev, LAST_PACKET,
- frame, data, 0);
+ gspca_frame_add(gspca_dev, LAST_PACKET,
+ NULL, 0);
sd->frame_count++;
/* Create a new frame */
- gspca_frame_add(gspca_dev, FIRST_PACKET, frame, data, len);
+ gspca_frame_add(gspca_dev, FIRST_PACKET, data, len);
PDEBUG(D_FRAM, "Starting new frame %d",
sd->frame_count);
} else {
- int cur_frame_len = frame->data_end - frame->data;
+ struct gspca_frame *frame;
+ int cur_frame_len;
+ frame = gspca_get_i_frame(gspca_dev);
+ if (frame == NULL) {
+ gspca_dev->last_packet_type = DISCARD_PACKET;
+ return;
+ }
+
+ cur_frame_len = frame->data_end - frame->data;
/* Remove urb header */
data += 4;
len -= 4;
@@ -316,12 +323,12 @@
PDEBUG(D_FRAM, "Continuing frame %d copying %d bytes",
sd->frame_count, len);
- gspca_frame_add(gspca_dev, INTER_PACKET, frame,
+ gspca_frame_add(gspca_dev, INTER_PACKET,
data, len);
} else if (frame->v4l2_buf.length - cur_frame_len > 0) {
/* Add the remaining data up to frame size */
- gspca_frame_add(gspca_dev, INTER_PACKET, frame, data,
- frame->v4l2_buf.length - cur_frame_len);
+ gspca_frame_add(gspca_dev, INTER_PACKET, data,
+ frame->v4l2_buf.length - cur_frame_len);
}
}
}
diff --git a/drivers/media/video/gspca/mars.c b/drivers/media/video/gspca/mars.c
index de769ca..9cf8d68 100644
--- a/drivers/media/video/gspca/mars.c
+++ b/drivers/media/video/gspca/mars.c
@@ -325,8 +325,7 @@
}
static void sd_pkt_scan(struct gspca_dev *gspca_dev,
- struct gspca_frame *frame, /* target */
- __u8 *data, /* isoc packet */
+ u8 *data, /* isoc packet */
int len) /* iso packet length */
{
struct sd *sd = (struct sd *) gspca_dev;
@@ -348,11 +347,11 @@
|| data[5 + p] == 0x67) {
PDEBUG(D_PACK, "sof offset: %d len: %d",
p, len);
- frame = gspca_frame_add(gspca_dev, LAST_PACKET,
- frame, data, p);
+ gspca_frame_add(gspca_dev, LAST_PACKET,
+ data, p);
/* put the JPEG header */
- gspca_frame_add(gspca_dev, FIRST_PACKET, frame,
+ gspca_frame_add(gspca_dev, FIRST_PACKET,
sd->jpeg_hdr, JPEG_HDR_SZ);
data += p + 16;
len -= p + 16;
@@ -360,7 +359,7 @@
}
}
}
- gspca_frame_add(gspca_dev, INTER_PACKET, frame, data, len);
+ gspca_frame_add(gspca_dev, INTER_PACKET, data, len);
}
static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val)
diff --git a/drivers/media/video/gspca/mr97310a.c b/drivers/media/video/gspca/mr97310a.c
index f8328b9..126d968 100644
--- a/drivers/media/video/gspca/mr97310a.c
+++ b/drivers/media/video/gspca/mr97310a.c
@@ -1,23 +1,30 @@
/*
* Mars MR97310A library
*
+ * The original mr97310a driver, which supported the Aiptek Pencam VGA+, is
* Copyright (C) 2009 Kyle Guinn <elyk03@gmail.com>
*
* Support for the MR97310A cameras in addition to the Aiptek Pencam VGA+
* and for the routines for detecting and classifying these various cameras,
+ * is Copyright (C) 2009 Theodore Kilgore <kilgota@auburn.edu>
*
+ * Support for the control settings for the CIF cameras is
+ * Copyright (C) 2009 Hans de Goede <hdgoede@redhat.com> and
+ * Thomas Kaiser <thomas@kaiser-linux.li>
+ *
+ * Support for the control settings for the VGA cameras is
* Copyright (C) 2009 Theodore Kilgore <kilgota@auburn.edu>
*
- * Acknowledgements:
+ * Several previously unsupported cameras are owned and have been tested by
+ * Hans de Goede <hdgoede@redhat.com> and
+ * Thomas Kaiser <thomas@kaiser-linux.li> and
+ * Theodore Kilgore <kilgota@auburn.edu> and
+ * Edmond Rodriguez <erodrig_97@yahoo.com> and
+ * Aurelien Jacobs <aurel@gnuage.org>
*
* The MR97311A support in gspca/mars.c has been helpful in understanding some
* of the registers in these cameras.
*
- * Hans de Goede <hdgoede@redhat.com> and
- * Thomas Kaiser <thomas@kaiser-linux.li>
- * have assisted with their experience. Each of them has also helped by
- * testing a previously unsupported camera.
- *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
@@ -40,11 +47,9 @@
#define CAM_TYPE_CIF 0
#define CAM_TYPE_VGA 1
-#define MR97310A_BRIGHTNESS_MIN -254
-#define MR97310A_BRIGHTNESS_MAX 255
#define MR97310A_BRIGHTNESS_DEFAULT 0
-#define MR97310A_EXPOSURE_MIN 300
+#define MR97310A_EXPOSURE_MIN 0
#define MR97310A_EXPOSURE_MAX 4095
#define MR97310A_EXPOSURE_DEFAULT 1000
@@ -52,6 +57,10 @@
#define MR97310A_GAIN_MAX 31
#define MR97310A_GAIN_DEFAULT 25
+#define MR97310A_MIN_CLOCKDIV_MIN 3
+#define MR97310A_MIN_CLOCKDIV_MAX 8
+#define MR97310A_MIN_CLOCKDIV_DEFAULT 3
+
MODULE_AUTHOR("Kyle Guinn <elyk03@gmail.com>,"
"Theodore Kilgore <kilgota@auburn.edu>");
MODULE_DESCRIPTION("GSPCA/Mars-Semi MR97310A USB Camera Driver");
@@ -69,10 +78,12 @@
u8 cam_type; /* 0 is CIF and 1 is VGA */
u8 sensor_type; /* We use 0 and 1 here, too. */
u8 do_lcd_stop;
+ u8 adj_colors;
int brightness;
u16 exposure;
u8 gain;
+ u8 min_clockdiv;
};
struct sensor_w_data {
@@ -82,26 +93,31 @@
int len;
};
+static void sd_stopN(struct gspca_dev *gspca_dev);
static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val);
static int sd_getbrightness(struct gspca_dev *gspca_dev, __s32 *val);
static int sd_setexposure(struct gspca_dev *gspca_dev, __s32 val);
static int sd_getexposure(struct gspca_dev *gspca_dev, __s32 *val);
static int sd_setgain(struct gspca_dev *gspca_dev, __s32 val);
static int sd_getgain(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_setmin_clockdiv(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_getmin_clockdiv(struct gspca_dev *gspca_dev, __s32 *val);
static void setbrightness(struct gspca_dev *gspca_dev);
static void setexposure(struct gspca_dev *gspca_dev);
static void setgain(struct gspca_dev *gspca_dev);
/* V4L2 controls supported by the driver */
static struct ctrl sd_ctrls[] = {
+/* Separate brightness control description for Argus QuickClix as it has
+ different limits from the other mr97310a cameras */
{
-#define BRIGHTNESS_IDX 0
+#define NORM_BRIGHTNESS_IDX 0
{
.id = V4L2_CID_BRIGHTNESS,
.type = V4L2_CTRL_TYPE_INTEGER,
.name = "Brightness",
- .minimum = MR97310A_BRIGHTNESS_MIN,
- .maximum = MR97310A_BRIGHTNESS_MAX,
+ .minimum = -254,
+ .maximum = 255,
.step = 1,
.default_value = MR97310A_BRIGHTNESS_DEFAULT,
.flags = 0,
@@ -110,7 +126,22 @@
.get = sd_getbrightness,
},
{
-#define EXPOSURE_IDX 1
+#define ARGUS_QC_BRIGHTNESS_IDX 1
+ {
+ .id = V4L2_CID_BRIGHTNESS,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Brightness",
+ .minimum = 0,
+ .maximum = 15,
+ .step = 1,
+ .default_value = MR97310A_BRIGHTNESS_DEFAULT,
+ .flags = 0,
+ },
+ .set = sd_setbrightness,
+ .get = sd_getbrightness,
+ },
+ {
+#define EXPOSURE_IDX 2
{
.id = V4L2_CID_EXPOSURE,
.type = V4L2_CTRL_TYPE_INTEGER,
@@ -125,7 +156,7 @@
.get = sd_getexposure,
},
{
-#define GAIN_IDX 2
+#define GAIN_IDX 3
{
.id = V4L2_CID_GAIN,
.type = V4L2_CTRL_TYPE_INTEGER,
@@ -139,6 +170,21 @@
.set = sd_setgain,
.get = sd_getgain,
},
+ {
+#define MIN_CLOCKDIV_IDX 4
+ {
+ .id = V4L2_CID_PRIVATE_BASE,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Minimum Clock Divider",
+ .minimum = MR97310A_MIN_CLOCKDIV_MIN,
+ .maximum = MR97310A_MIN_CLOCKDIV_MAX,
+ .step = 1,
+ .default_value = MR97310A_MIN_CLOCKDIV_DEFAULT,
+ .flags = 0,
+ },
+ .set = sd_setmin_clockdiv,
+ .get = sd_getmin_clockdiv,
+ },
};
static const struct v4l2_pix_format vga_mode[] = {
@@ -230,12 +276,17 @@
int rc;
buf = data;
- rc = sensor_write_reg(gspca_dev, reg, 0x01, &buf, 1);
+ if (sd->cam_type == CAM_TYPE_CIF) {
+ rc = sensor_write_reg(gspca_dev, reg, 0x01, &buf, 1);
+ confirm_reg = sd->sensor_type ? 0x13 : 0x11;
+ } else {
+ rc = sensor_write_reg(gspca_dev, reg, 0x00, &buf, 1);
+ confirm_reg = 0x11;
+ }
if (rc < 0)
return rc;
buf = 0x01;
- confirm_reg = sd->sensor_type ? 0x13 : 0x11;
rc = sensor_write_reg(gspca_dev, confirm_reg, 0x00, &buf, 1);
if (rc < 0)
return rc;
@@ -243,18 +294,26 @@
return 0;
}
-static int cam_get_response16(struct gspca_dev *gspca_dev)
+static int cam_get_response16(struct gspca_dev *gspca_dev, u8 reg, int verbose)
{
- __u8 *data = gspca_dev->usb_buf;
int err_code;
- data[0] = 0x21;
+ gspca_dev->usb_buf[0] = reg;
err_code = mr_write(gspca_dev, 1);
if (err_code < 0)
return err_code;
err_code = mr_read(gspca_dev, 16);
- return err_code;
+ if (err_code < 0)
+ return err_code;
+
+ if (verbose)
+ PDEBUG(D_PROBE, "Register: %02x reads %02x%02x%02x", reg,
+ gspca_dev->usb_buf[0],
+ gspca_dev->usb_buf[1],
+ gspca_dev->usb_buf[2]);
+
+ return 0;
}
static int zero_the_pointer(struct gspca_dev *gspca_dev)
@@ -264,7 +323,7 @@
u8 status = 0;
int tries = 0;
- err_code = cam_get_response16(gspca_dev);
+ err_code = cam_get_response16(gspca_dev, 0x21, 0);
if (err_code < 0)
return err_code;
@@ -275,7 +334,7 @@
if (err_code < 0)
return err_code;
- err_code = cam_get_response16(gspca_dev);
+ err_code = cam_get_response16(gspca_dev, 0x21, 0);
if (err_code < 0)
return err_code;
@@ -285,7 +344,7 @@
if (err_code < 0)
return err_code;
- err_code = cam_get_response16(gspca_dev);
+ err_code = cam_get_response16(gspca_dev, 0x21, 0);
if (err_code < 0)
return err_code;
@@ -295,7 +354,7 @@
if (err_code < 0)
return err_code;
- err_code = cam_get_response16(gspca_dev);
+ err_code = cam_get_response16(gspca_dev, 0x21, 0);
if (err_code < 0)
return err_code;
@@ -306,7 +365,7 @@
return err_code;
while (status != 0x0a && tries < 256) {
- err_code = cam_get_response16(gspca_dev);
+ err_code = cam_get_response16(gspca_dev, 0x21, 0);
status = data[0];
tries++;
if (err_code < 0)
@@ -323,7 +382,7 @@
if (err_code < 0)
return err_code;
- err_code = cam_get_response16(gspca_dev);
+ err_code = cam_get_response16(gspca_dev, 0x21, 0);
status = data[0];
tries++;
if (err_code < 0)
@@ -342,89 +401,202 @@
return 0;
}
-static u8 get_sensor_id(struct gspca_dev *gspca_dev)
+static int stream_start(struct gspca_dev *gspca_dev)
{
- int err_code;
-
- gspca_dev->usb_buf[0] = 0x1e;
- err_code = mr_write(gspca_dev, 1);
- if (err_code < 0)
- return err_code;
-
- err_code = mr_read(gspca_dev, 16);
- if (err_code < 0)
- return err_code;
-
- PDEBUG(D_PROBE, "Byte zero reported is %01x", gspca_dev->usb_buf[0]);
-
- return gspca_dev->usb_buf[0];
+ gspca_dev->usb_buf[0] = 0x01;
+ gspca_dev->usb_buf[1] = 0x01;
+ return mr_write(gspca_dev, 2);
}
-/* this function is called at probe time */
+static void stream_stop(struct gspca_dev *gspca_dev)
+{
+ gspca_dev->usb_buf[0] = 0x01;
+ gspca_dev->usb_buf[1] = 0x00;
+ if (mr_write(gspca_dev, 2) < 0)
+ PDEBUG(D_ERR, "Stream Stop failed");
+}
+
+static void lcd_stop(struct gspca_dev *gspca_dev)
+{
+ gspca_dev->usb_buf[0] = 0x19;
+ gspca_dev->usb_buf[1] = 0x54;
+ if (mr_write(gspca_dev, 2) < 0)
+ PDEBUG(D_ERR, "LCD Stop failed");
+}
+
+static int isoc_enable(struct gspca_dev *gspca_dev)
+{
+ gspca_dev->usb_buf[0] = 0x00;
+ gspca_dev->usb_buf[1] = 0x4d; /* ISOC transfering enable... */
+ return mr_write(gspca_dev, 2);
+}
+
+/* This function is called at probe time */
static int sd_config(struct gspca_dev *gspca_dev,
const struct usb_device_id *id)
{
struct sd *sd = (struct sd *) gspca_dev;
struct cam *cam;
- __u8 *data = gspca_dev->usb_buf;
int err_code;
cam = &gspca_dev->cam;
cam->cam_mode = vga_mode;
cam->nmodes = ARRAY_SIZE(vga_mode);
+ sd->do_lcd_stop = 0;
- if (id->idProduct == 0x010e) {
+ /* Several of the supported CIF cameras share the same USB ID but
+ * require different initializations and different control settings.
+ * The same is true of the VGA cameras. Therefore, we are forced
+ * to start the initialization process in order to determine which
+ * camera is present. Some of the supported cameras require the
+ * memory pointer to be set to 0 as the very first item of business
+ * or else they will not stream. So we do that immediately.
+ */
+ err_code = zero_the_pointer(gspca_dev);
+ if (err_code < 0)
+ return err_code;
+
+ err_code = stream_start(gspca_dev);
+ if (err_code < 0)
+ return err_code;
+
+ if (id->idProduct == 0x0110 || id->idProduct == 0x010e) {
sd->cam_type = CAM_TYPE_CIF;
cam->nmodes--;
+ err_code = cam_get_response16(gspca_dev, 0x06, 1);
+ if (err_code < 0)
+ return err_code;
+ /*
+ * All but one of the known CIF cameras share the same USB ID,
+ * but two different init routines are in use, and the control
+ * settings are different, too. We need to detect which camera
+ * of the two known varieties is connected!
+ *
+ * A list of known CIF cameras follows. They all report either
+ * 0002 for type 0 or 0003 for type 1.
+ * If you have another to report, please do
+ *
+ * Name sd->sensor_type reported by
+ *
+ * Sakar Spy-shot 0 T. Kilgore
+ * Innovage 0 T. Kilgore
+ * Vivitar Mini 0 H. De Goede
+ * Vivitar Mini 0 E. Rodriguez
+ * Vivitar Mini 1 T. Kilgore
+ * Elta-Media 8212dc 1 T. Kaiser
+ * Philips dig. keych. 1 T. Kilgore
+ * Trust Spyc@m 100 1 A. Jacobs
+ */
+ switch (gspca_dev->usb_buf[1]) {
+ case 2:
+ sd->sensor_type = 0;
+ break;
+ case 3:
+ sd->sensor_type = 1;
+ break;
+ default:
+ PDEBUG(D_ERR, "Unknown CIF Sensor id : %02x",
+ gspca_dev->usb_buf[1]);
+ return -ENODEV;
+ }
+ PDEBUG(D_PROBE, "MR97310A CIF camera detected, sensor: %d",
+ sd->sensor_type);
+ } else {
+ sd->cam_type = CAM_TYPE_VGA;
- data[0] = 0x01;
- data[1] = 0x01;
- err_code = mr_write(gspca_dev, 2);
+ err_code = cam_get_response16(gspca_dev, 0x07, 1);
if (err_code < 0)
return err_code;
- msleep(200);
- data[0] = get_sensor_id(gspca_dev);
/*
- * Known CIF cameras. If you have another to report, please do
+ * Here is a table of the responses to the previous command
+ * from the known MR97310A VGA cameras.
*
- * Name byte just read sd->sensor_type
- * reported by
- * Sakar Spy-shot 0x28 T. Kilgore 0
- * Innovage 0xf5 (unstable) T. Kilgore 0
- * Vivitar Mini 0x53 H. De Goede 0
- * Vivitar Mini 0x04 / 0x24 E. Rodriguez 0
- * Vivitar Mini 0x08 T. Kilgore 1
- * Elta-Media 8212dc 0x23 T. Kaiser 1
- * Philips dig. keych. 0x37 T. Kilgore 1
+ * Name gspca_dev->usb_buf[] sd->sensor_type
+ * sd->do_lcd_stop
+ * Aiptek Pencam VGA+ 0300 0 1
+ * ION digital 0350 0 1
+ * Argus DC-1620 0450 1 0
+ * Argus QuickClix 0420 1 1
+ *
+ * Based upon these results, we assume default settings
+ * and then correct as necessary, as follows.
+ *
*/
- if ((data[0] & 0x78) == 8 ||
- ((data[0] & 0x2) == 0x2 && data[0] != 0x53))
- sd->sensor_type = 1;
- else
- sd->sensor_type = 0;
- PDEBUG(D_PROBE, "MR97310A CIF camera detected, sensor: %d",
- sd->sensor_type);
-
- if (force_sensor_type != -1) {
- sd->sensor_type = !! force_sensor_type;
- PDEBUG(D_PROBE, "Forcing sensor type to: %d",
- sd->sensor_type);
+ sd->sensor_type = 1;
+ sd->do_lcd_stop = 0;
+ sd->adj_colors = 0;
+ if ((gspca_dev->usb_buf[0] != 0x03) &&
+ (gspca_dev->usb_buf[0] != 0x04)) {
+ PDEBUG(D_ERR, "Unknown VGA Sensor id Byte 0: %02x",
+ gspca_dev->usb_buf[1]);
+ PDEBUG(D_ERR, "Defaults assumed, may not work");
+ PDEBUG(D_ERR, "Please report this");
}
+ /* Sakar Digital color needs to be adjusted. */
+ if ((gspca_dev->usb_buf[0] == 0x03) &&
+ (gspca_dev->usb_buf[1] == 0x50))
+ sd->adj_colors = 1;
+ if (gspca_dev->usb_buf[0] == 0x04) {
+ sd->do_lcd_stop = 1;
+ switch (gspca_dev->usb_buf[1]) {
+ case 0x50:
+ sd->sensor_type = 0;
+ PDEBUG(D_PROBE, "sensor_type corrected to 0");
+ break;
+ case 0x20:
+ /* Nothing to do here. */
+ break;
+ default:
+ PDEBUG(D_ERR,
+ "Unknown VGA Sensor id Byte 1: %02x",
+ gspca_dev->usb_buf[1]);
+ PDEBUG(D_ERR,
+ "Defaults assumed, may not work");
+ PDEBUG(D_ERR, "Please report this");
+ }
+ }
+ PDEBUG(D_PROBE, "MR97310A VGA camera detected, sensor: %d",
+ sd->sensor_type);
+ }
+ /* Stop streaming as we've started it to probe the sensor type. */
+ sd_stopN(gspca_dev);
+ if (force_sensor_type != -1) {
+ sd->sensor_type = !!force_sensor_type;
+ PDEBUG(D_PROBE, "Forcing sensor type to: %d",
+ sd->sensor_type);
+ }
+
+ /* Setup controls depending on camera type */
+ if (sd->cam_type == CAM_TYPE_CIF) {
+ /* No brightness for sensor_type 0 */
if (sd->sensor_type == 0)
- gspca_dev->ctrl_dis = (1 << BRIGHTNESS_IDX);
+ gspca_dev->ctrl_dis = (1 << NORM_BRIGHTNESS_IDX) |
+ (1 << ARGUS_QC_BRIGHTNESS_IDX);
+ else
+ gspca_dev->ctrl_dis = (1 << ARGUS_QC_BRIGHTNESS_IDX) |
+ (1 << MIN_CLOCKDIV_IDX);
} else {
- sd->cam_type = CAM_TYPE_VGA;
- PDEBUG(D_PROBE, "MR97310A VGA camera detected");
- gspca_dev->ctrl_dis = (1 << BRIGHTNESS_IDX) |
- (1 << EXPOSURE_IDX) | (1 << GAIN_IDX);
+ /* All controls need to be disabled if VGA sensor_type is 0 */
+ if (sd->sensor_type == 0)
+ gspca_dev->ctrl_dis = (1 << NORM_BRIGHTNESS_IDX) |
+ (1 << ARGUS_QC_BRIGHTNESS_IDX) |
+ (1 << EXPOSURE_IDX) |
+ (1 << GAIN_IDX) |
+ (1 << MIN_CLOCKDIV_IDX);
+ else if (sd->do_lcd_stop)
+ /* Argus QuickClix has different brightness limits */
+ gspca_dev->ctrl_dis = (1 << NORM_BRIGHTNESS_IDX);
+ else
+ gspca_dev->ctrl_dis = (1 << ARGUS_QC_BRIGHTNESS_IDX);
}
sd->brightness = MR97310A_BRIGHTNESS_DEFAULT;
sd->exposure = MR97310A_EXPOSURE_DEFAULT;
sd->gain = MR97310A_GAIN_DEFAULT;
+ sd->min_clockdiv = MR97310A_MIN_CLOCKDIV_DEFAULT;
return 0;
}
@@ -455,11 +627,6 @@
};
/* Note: Some of the above descriptions guessed from MR97113A driver */
- data[0] = 0x01;
- data[1] = 0x01;
- err_code = mr_write(gspca_dev, 2);
- if (err_code < 0)
- return err_code;
memcpy(data, startup_string, 11);
if (sd->sensor_type)
@@ -533,22 +700,7 @@
err_code = sensor_write_regs(gspca_dev, cif_sensor1_init_data,
ARRAY_SIZE(cif_sensor1_init_data));
}
- if (err_code < 0)
- return err_code;
-
- setbrightness(gspca_dev);
- setexposure(gspca_dev);
- setgain(gspca_dev);
-
- msleep(200);
-
- data[0] = 0x00;
- data[1] = 0x4d; /* ISOC transfering enable... */
- err_code = mr_write(gspca_dev, 2);
- if (err_code < 0)
- return err_code;
-
- return 0;
+ return err_code;
}
static int start_vga_cam(struct gspca_dev *gspca_dev)
@@ -558,84 +710,8 @@
int err_code;
const __u8 startup_string[] = {0x00, 0x0d, 0x01, 0x00, 0x00, 0x2b,
0x00, 0x00, 0x00, 0x50, 0xc0};
-
/* What some of these mean is explained in start_cif_cam(), above */
- sd->sof_read = 0;
- /*
- * We have to know which camera we have, because the register writes
- * depend upon the camera. This test, run before we actually enter
- * the initialization routine, distinguishes most of the cameras, If
- * needed, another routine is done later, too.
- */
- memset(data, 0, 16);
- data[0] = 0x20;
- err_code = mr_write(gspca_dev, 1);
- if (err_code < 0)
- return err_code;
-
- err_code = mr_read(gspca_dev, 16);
- if (err_code < 0)
- return err_code;
-
- PDEBUG(D_PROBE, "Byte reported is %02x", data[0]);
-
- msleep(200);
- /*
- * Known VGA cameras. If you have another to report, please do
- *
- * Name byte just read sd->sensor_type
- * sd->do_lcd_stop
- * Aiptek Pencam VGA+ 0x31 0 1
- * ION digital 0x31 0 1
- * Argus DC-1620 0x30 1 0
- * Argus QuickClix 0x30 1 1 (not caught here)
- */
- sd->sensor_type = data[0] & 1;
- sd->do_lcd_stop = (~data[0]) & 1;
-
-
-
- /* Streaming setup begins here. */
-
-
- data[0] = 0x01;
- data[1] = 0x01;
- err_code = mr_write(gspca_dev, 2);
- if (err_code < 0)
- return err_code;
-
- /*
- * A second test can now resolve any remaining ambiguity in the
- * identification of the camera type,
- */
- if (!sd->sensor_type) {
- data[0] = get_sensor_id(gspca_dev);
- if (data[0] == 0x7f) {
- sd->sensor_type = 1;
- PDEBUG(D_PROBE, "sensor_type corrected to 1");
- }
- msleep(200);
- }
-
- if (force_sensor_type != -1) {
- sd->sensor_type = !! force_sensor_type;
- PDEBUG(D_PROBE, "Forcing sensor type to: %d",
- sd->sensor_type);
- }
-
- /*
- * Known VGA cameras.
- * This test is only run if the previous test returned 0x30, but
- * here is the information for all others, too, just for reference.
- *
- * Name byte just read sd->sensor_type
- *
- * Aiptek Pencam VGA+ 0xfb (this test not run) 1
- * ION digital 0xbd (this test not run) 1
- * Argus DC-1620 0xe5 (no change) 0
- * Argus QuickClix 0x7f (reclassified) 1
- */
memcpy(data, startup_string, 11);
if (!sd->sensor_type) {
data[5] = 0x00;
@@ -689,29 +765,44 @@
err_code = sensor_write_regs(gspca_dev, vga_sensor0_init_data,
ARRAY_SIZE(vga_sensor0_init_data));
} else { /* sd->sensor_type = 1 */
- const struct sensor_w_data vga_sensor1_init_data[] = {
+ const struct sensor_w_data color_adj[] = {
{0x02, 0x00, {0x06, 0x59, 0x0c, 0x16, 0x00,
- 0x07, 0x00, 0x01}, 8},
+ /* adjusted blue, green, red gain correct
+ too much blue from the Sakar Digital */
+ 0x05, 0x01, 0x04}, 8}
+ };
+
+ const struct sensor_w_data color_no_adj[] = {
+ {0x02, 0x00, {0x06, 0x59, 0x0c, 0x16, 0x00,
+ /* default blue, green, red gain settings */
+ 0x07, 0x00, 0x01}, 8}
+ };
+
+ const struct sensor_w_data vga_sensor1_init_data[] = {
{0x11, 0x04, {0x01}, 1},
- /*{0x0a, 0x00, {0x00, 0x01, 0x00, 0x00, 0x01, */
- {0x0a, 0x00, {0x01, 0x06, 0x00, 0x00, 0x01,
+ {0x0a, 0x00, {0x00, 0x01, 0x00, 0x00, 0x01,
+ /* These settings may be better for some cameras */
+ /* {0x0a, 0x00, {0x01, 0x06, 0x00, 0x00, 0x01, */
0x00, 0x0a}, 7},
{0x11, 0x04, {0x01}, 1},
{0x12, 0x00, {0x00, 0x63, 0x00, 0x70, 0x00, 0x00}, 6},
{0x11, 0x04, {0x01}, 1},
{0, 0, {0}, 0}
};
+
+ if (sd->adj_colors)
+ err_code = sensor_write_regs(gspca_dev, color_adj,
+ ARRAY_SIZE(color_adj));
+ else
+ err_code = sensor_write_regs(gspca_dev, color_no_adj,
+ ARRAY_SIZE(color_no_adj));
+
+ if (err_code < 0)
+ return err_code;
+
err_code = sensor_write_regs(gspca_dev, vga_sensor1_init_data,
ARRAY_SIZE(vga_sensor1_init_data));
}
- if (err_code < 0)
- return err_code;
-
- msleep(200);
- data[0] = 0x00;
- data[1] = 0x4d; /* ISOC transfering enable... */
- err_code = mr_write(gspca_dev, 2);
-
return err_code;
}
@@ -719,97 +810,120 @@
{
struct sd *sd = (struct sd *) gspca_dev;
int err_code;
- struct cam *cam;
- cam = &gspca_dev->cam;
sd->sof_read = 0;
- /*
- * Some of the supported cameras require the memory pointer to be
- * set to 0, or else they will not stream.
- */
- zero_the_pointer(gspca_dev);
- msleep(200);
+
+ /* Some of the VGA cameras require the memory pointer
+ * to be set to 0 again. We have been forced to start the
+ * stream in sd_config() to detect the hardware, and closed it.
+ * Thus, we need here to do a completely fresh and clean start. */
+ err_code = zero_the_pointer(gspca_dev);
+ if (err_code < 0)
+ return err_code;
+
+ err_code = stream_start(gspca_dev);
+ if (err_code < 0)
+ return err_code;
+
if (sd->cam_type == CAM_TYPE_CIF) {
err_code = start_cif_cam(gspca_dev);
} else {
err_code = start_vga_cam(gspca_dev);
}
- return err_code;
+ if (err_code < 0)
+ return err_code;
+
+ setbrightness(gspca_dev);
+ setexposure(gspca_dev);
+ setgain(gspca_dev);
+
+ return isoc_enable(gspca_dev);
}
static void sd_stopN(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
- int result;
- gspca_dev->usb_buf[0] = 1;
- gspca_dev->usb_buf[1] = 0;
- result = mr_write(gspca_dev, 2);
- if (result < 0)
- PDEBUG(D_ERR, "Camera Stop failed");
-
+ stream_stop(gspca_dev);
/* Not all the cams need this, but even if not, probably a good idea */
zero_the_pointer(gspca_dev);
- if (sd->do_lcd_stop) {
- gspca_dev->usb_buf[0] = 0x19;
- gspca_dev->usb_buf[1] = 0x54;
- result = mr_write(gspca_dev, 2);
- if (result < 0)
- PDEBUG(D_ERR, "Camera Stop failed");
- }
+ if (sd->do_lcd_stop)
+ lcd_stop(gspca_dev);
}
static void setbrightness(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
u8 val;
-
- if (gspca_dev->ctrl_dis & (1 << BRIGHTNESS_IDX))
+ u8 sign_reg = 7; /* This reg and the next one used on CIF cams. */
+ u8 value_reg = 8; /* VGA cams seem to use regs 0x0b and 0x0c */
+ const u8 quick_clix_table[] =
+ /* 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 */
+ { 0, 4, 8, 12, 1, 2, 3, 5, 6, 9, 7, 10, 13, 11, 14, 15};
+ /*
+ * This control is disabled for CIF type 1 and VGA type 0 cameras.
+ * It does not quite act linearly for the Argus QuickClix camera,
+ * but it does control brightness. The values are 0 - 15 only, and
+ * the table above makes them act consecutively.
+ */
+ if ((gspca_dev->ctrl_dis & (1 << NORM_BRIGHTNESS_IDX)) &&
+ (gspca_dev->ctrl_dis & (1 << ARGUS_QC_BRIGHTNESS_IDX)))
return;
- /* Note register 7 is also seen as 0x8x or 0xCx in dumps */
+ if (sd->cam_type == CAM_TYPE_VGA) {
+ sign_reg += 4;
+ value_reg += 4;
+ }
+
+ /* Note register 7 is also seen as 0x8x or 0xCx in some dumps */
if (sd->brightness > 0) {
- sensor_write1(gspca_dev, 7, 0x00);
+ sensor_write1(gspca_dev, sign_reg, 0x00);
val = sd->brightness;
} else {
- sensor_write1(gspca_dev, 7, 0x01);
- val = 257 - sd->brightness;
+ sensor_write1(gspca_dev, sign_reg, 0x01);
+ val = (257 - sd->brightness);
}
- sensor_write1(gspca_dev, 8, val);
+ /* Use lookup table for funky Argus QuickClix brightness */
+ if (sd->do_lcd_stop)
+ val = quick_clix_table[val];
+
+ sensor_write1(gspca_dev, value_reg, val);
}
static void setexposure(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
- u8 val;
+ int exposure;
+ u8 buf[2];
if (gspca_dev->ctrl_dis & (1 << EXPOSURE_IDX))
return;
- if (sd->sensor_type) {
- val = sd->exposure >> 4;
- sensor_write1(gspca_dev, 3, val);
- val = sd->exposure & 0xf;
- sensor_write1(gspca_dev, 4, val);
+ if (sd->cam_type == CAM_TYPE_CIF && sd->sensor_type == 1) {
+ /* This cam does not like exposure settings < 300,
+ so scale 0 - 4095 to 300 - 4095 */
+ exposure = (sd->exposure * 9267) / 10000 + 300;
+ sensor_write1(gspca_dev, 3, exposure >> 4);
+ sensor_write1(gspca_dev, 4, exposure & 0x0f);
} else {
- u8 clockdiv;
- int exposure;
-
/* We have both a clock divider and an exposure register.
We first calculate the clock divider, as that determines
- the maximum exposure and then we calculayte the exposure
+ the maximum exposure and then we calculate the exposure
register setting (which goes from 0 - 511).
Note our 0 - 4095 exposure is mapped to 0 - 511
milliseconds exposure time */
- clockdiv = (60 * sd->exposure + 7999) / 8000;
+ u8 clockdiv = (60 * sd->exposure + 7999) / 8000;
/* Limit framerate to not exceed usb bandwidth */
- if (clockdiv < 3 && gspca_dev->width >= 320)
- clockdiv = 3;
+ if (clockdiv < sd->min_clockdiv && gspca_dev->width >= 320)
+ clockdiv = sd->min_clockdiv;
else if (clockdiv < 2)
clockdiv = 2;
+ if (sd->cam_type == CAM_TYPE_VGA && clockdiv < 4)
+ clockdiv = 4;
+
/* Frame exposure time in ms = 1000 * clockdiv / 60 ->
exposure = (sd->exposure / 8) * 511 / (1000 * clockdiv / 60) */
exposure = (60 * 511 * sd->exposure) / (8000 * clockdiv);
@@ -819,9 +933,10 @@
/* exposure register value is reversed! */
exposure = 511 - exposure;
+ buf[0] = exposure & 0xff;
+ buf[1] = exposure >> 8;
+ sensor_write_reg(gspca_dev, 0x0e, 0, buf, 2);
sensor_write1(gspca_dev, 0x02, clockdiv);
- sensor_write1(gspca_dev, 0x0e, exposure & 0xff);
- sensor_write1(gspca_dev, 0x0f, exposure >> 8);
}
}
@@ -832,7 +947,7 @@
if (gspca_dev->ctrl_dis & (1 << GAIN_IDX))
return;
- if (sd->sensor_type) {
+ if (sd->cam_type == CAM_TYPE_CIF && sd->sensor_type == 1) {
sensor_write1(gspca_dev, 0x0e, sd->gain);
} else {
sensor_write1(gspca_dev, 0x10, sd->gain);
@@ -893,17 +1008,35 @@
return 0;
}
+static int sd_setmin_clockdiv(struct gspca_dev *gspca_dev, __s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sd->min_clockdiv = val;
+ if (gspca_dev->streaming)
+ setexposure(gspca_dev);
+ return 0;
+}
+
+static int sd_getmin_clockdiv(struct gspca_dev *gspca_dev, __s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ *val = sd->min_clockdiv;
+ return 0;
+}
+
/* Include pac common sof detection functions */
#include "pac_common.h"
static void sd_pkt_scan(struct gspca_dev *gspca_dev,
- struct gspca_frame *frame, /* target */
- __u8 *data, /* isoc packet */
- int len) /* iso packet length */
+ u8 *data, /* isoc packet */
+ int len) /* iso packet length */
{
+ struct sd *sd = (struct sd *) gspca_dev;
unsigned char *sof;
- sof = pac_find_sof(gspca_dev, data, len);
+ sof = pac_find_sof(&sd->sof_read, data, len);
if (sof) {
int n;
@@ -913,15 +1046,15 @@
n -= sizeof pac_sof_marker;
else
n = 0;
- frame = gspca_frame_add(gspca_dev, LAST_PACKET, frame,
+ gspca_frame_add(gspca_dev, LAST_PACKET,
data, n);
/* Start next frame. */
- gspca_frame_add(gspca_dev, FIRST_PACKET, frame,
+ gspca_frame_add(gspca_dev, FIRST_PACKET,
pac_sof_marker, sizeof pac_sof_marker);
len -= sof - data;
data = sof;
}
- gspca_frame_add(gspca_dev, INTER_PACKET, frame, data, len);
+ gspca_frame_add(gspca_dev, INTER_PACKET, data, len);
}
/* sub-driver description */
@@ -938,6 +1071,7 @@
/* -- module initialisation -- */
static const __devinitdata struct usb_device_id device_table[] = {
+ {USB_DEVICE(0x08ca, 0x0110)}, /* Trust Spyc@m 100 */
{USB_DEVICE(0x08ca, 0x0111)}, /* Aiptek Pencam VGA+ */
{USB_DEVICE(0x093a, 0x010f)}, /* All other known MR97310A VGA cams */
{USB_DEVICE(0x093a, 0x010e)}, /* All known MR97310A CIF cams */
diff --git a/drivers/media/video/gspca/ov519.c b/drivers/media/video/gspca/ov519.c
index a5c190e..ad9ec33 100644
--- a/drivers/media/video/gspca/ov519.c
+++ b/drivers/media/video/gspca/ov519.c
@@ -2,14 +2,19 @@
* OV519 driver
*
* Copyright (C) 2008 Jean-Francois Moine (http://moinejf.free.fr)
+ * Copyright (C) 2009 Hans de Goede <hdegoede@redhat.com>
*
* This module is adapted from the ov51x-jpeg package, which itself
* was adapted from the ov511 driver.
*
* Original copyright for the ov511 driver is:
*
- * Copyright (c) 1999-2004 Mark W. McClelland
+ * Copyright (c) 1999-2006 Mark W. McClelland
* Support for OV519, OV8610 Copyright (c) 2003 Joerg Heckenbach
+ * Many improvements by Bret Wallach <bwallac1@san.rr.com>
+ * Color fixes by by Orion Sky Lawlor <olawlor@acm.org> (2/26/2000)
+ * OV7620 fixes by Charl P. Botha <cpbotha@ieee.org>
+ * Changes by Claudio Matsuoka <claudio@conectiva.com>
*
* ov51x-jpeg original copyright is:
*
@@ -58,6 +63,8 @@
#define BRIDGE_OV518 2
#define BRIDGE_OV518PLUS 3
#define BRIDGE_OV519 4
+#define BRIDGE_OVFX2 5
+#define BRIDGE_W9968CF 6
#define BRIDGE_MASK 7
char invert_led;
@@ -73,6 +80,10 @@
__u8 vflip;
__u8 autobrightness;
__u8 freq;
+ __u8 quality;
+#define QUALITY_MIN 50
+#define QUALITY_MAX 70
+#define QUALITY_DEF 50
__u8 stopped; /* Streaming is temporarily paused */
@@ -81,17 +92,31 @@
char sensor; /* Type of image sensor chip (SEN_*) */
#define SEN_UNKNOWN 0
-#define SEN_OV6620 1
-#define SEN_OV6630 2
-#define SEN_OV66308AF 3
-#define SEN_OV7610 4
-#define SEN_OV7620 5
-#define SEN_OV7640 6
-#define SEN_OV7670 7
-#define SEN_OV76BE 8
-#define SEN_OV8610 9
+#define SEN_OV2610 1
+#define SEN_OV3610 2
+#define SEN_OV6620 3
+#define SEN_OV6630 4
+#define SEN_OV66308AF 5
+#define SEN_OV7610 6
+#define SEN_OV7620 7
+#define SEN_OV7640 8
+#define SEN_OV7670 9
+#define SEN_OV76BE 10
+#define SEN_OV8610 11
+
+ u8 sensor_addr;
+ int sensor_width;
+ int sensor_height;
+ int sensor_reg_cache[256];
+
+ u8 *jpeg_hdr;
};
+/* Note this is a bit of a hack, but the w9968cf driver needs the code for all
+ the ov sensors which is already present here. When we have the time we
+ really should move the sensor drivers to v4l2 sub drivers. */
+#include "w996Xcf.c"
+
/* V4L2 controls supported by the driver */
static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val);
static int sd_getbrightness(struct gspca_dev *gspca_dev, __s32 *val);
@@ -345,6 +370,75 @@
.priv = 0},
};
+static const struct v4l2_pix_format ovfx2_vga_mode[] = {
+ {320, 240, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
+ .bytesperline = 320,
+ .sizeimage = 320 * 240,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .priv = 1},
+ {640, 480, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
+ .bytesperline = 640,
+ .sizeimage = 640 * 480,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .priv = 0},
+};
+static const struct v4l2_pix_format ovfx2_cif_mode[] = {
+ {160, 120, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
+ .bytesperline = 160,
+ .sizeimage = 160 * 120,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .priv = 3},
+ {176, 144, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
+ .bytesperline = 176,
+ .sizeimage = 176 * 144,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .priv = 1},
+ {320, 240, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
+ .bytesperline = 320,
+ .sizeimage = 320 * 240,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .priv = 2},
+ {352, 288, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
+ .bytesperline = 352,
+ .sizeimage = 352 * 288,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .priv = 0},
+};
+static const struct v4l2_pix_format ovfx2_ov2610_mode[] = {
+ {1600, 1200, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
+ .bytesperline = 1600,
+ .sizeimage = 1600 * 1200,
+ .colorspace = V4L2_COLORSPACE_SRGB},
+};
+static const struct v4l2_pix_format ovfx2_ov3610_mode[] = {
+ {640, 480, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
+ .bytesperline = 640,
+ .sizeimage = 640 * 480,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .priv = 1},
+ {800, 600, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
+ .bytesperline = 800,
+ .sizeimage = 800 * 600,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .priv = 1},
+ {1024, 768, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
+ .bytesperline = 1024,
+ .sizeimage = 1024 * 768,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .priv = 1},
+ {1600, 1200, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
+ .bytesperline = 1600,
+ .sizeimage = 1600 * 1200,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .priv = 0},
+ {2048, 1536, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
+ .bytesperline = 2048,
+ .sizeimage = 2048 * 1536,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .priv = 0},
+};
+
+
/* Registers common to OV511 / OV518 */
#define R51x_FIFO_PSIZE 0x30 /* 2 bytes wide w/ OV518(+) */
#define R51x_SYS_RESET 0x50
@@ -406,6 +500,30 @@
#define OV511_ENDPOINT_ADDRESS 1 /* Isoc endpoint number */
+/*
+ * The FX2 chip does not give us a zero length read at end of frame.
+ * It does, however, give a short read at the end of a frame, if
+ * neccessary, rather than run two frames together.
+ *
+ * By choosing the right bulk transfer size, we are guaranteed to always
+ * get a short read for the last read of each frame. Frame sizes are
+ * always a composite number (width * height, or a multiple) so if we
+ * choose a prime number, we are guaranteed that the last read of a
+ * frame will be short.
+ *
+ * But it isn't that easy: the 2.6 kernel requires a multiple of 4KB,
+ * otherwise EOVERFLOW "babbling" errors occur. I have not been able
+ * to figure out why. [PMiller]
+ *
+ * The constant (13 * 4096) is the largest "prime enough" number less than 64KB.
+ *
+ * It isn't enough to know the number of bytes per frame, in case we
+ * have data dropouts or buffer overruns (even though the FX2 double
+ * buffers, there are some pretty strict real time constraints for
+ * isochronous transfer for larger frame sizes).
+ */
+#define OVFX2_BULK_SIZE (13 * 4096)
+
/* I2C registers */
#define R51x_I2C_W_SID 0x41
#define R51x_I2C_SADDR_3 0x42
@@ -413,9 +531,11 @@
#define R51x_I2C_R_SID 0x44
#define R51x_I2C_DATA 0x45
#define R518_I2C_CTL 0x47 /* OV518(+) only */
+#define OVFX2_I2C_ADDR 0x00
/* I2C ADDRESSES */
#define OV7xx0_SID 0x42
+#define OV_HIRES_SID 0x60 /* OV9xxx / OV2xxx / OV3xxx */
#define OV8xx0_SID 0xa0
#define OV6xx0_SID 0xc0
@@ -508,6 +628,696 @@
__u8 val;
};
+/* Settings for OV2610 camera chip */
+static const struct ov_i2c_regvals norm_2610[] =
+{
+ { 0x12, 0x80 }, /* reset */
+};
+
+static const struct ov_i2c_regvals norm_3620b[] =
+{
+ /*
+ * From the datasheet: "Note that after writing to register COMH
+ * (0x12) to change the sensor mode, registers related to the
+ * sensor’s cropping window will be reset back to their default
+ * values."
+ *
+ * "wait 4096 external clock ... to make sure the sensor is
+ * stable and ready to access registers" i.e. 160us at 24MHz
+ */
+
+ { 0x12, 0x80 }, /* COMH reset */
+ { 0x12, 0x00 }, /* QXGA, master */
+
+ /*
+ * 11 CLKRC "Clock Rate Control"
+ * [7] internal frequency doublers: on
+ * [6] video port mode: master
+ * [5:0] clock divider: 1
+ */
+ { 0x11, 0x80 },
+
+ /*
+ * 13 COMI "Common Control I"
+ * = 192 (0xC0) 11000000
+ * COMI[7] "AEC speed selection"
+ * = 1 (0x01) 1....... "Faster AEC correction"
+ * COMI[6] "AEC speed step selection"
+ * = 1 (0x01) .1...... "Big steps, fast"
+ * COMI[5] "Banding filter on off"
+ * = 0 (0x00) ..0..... "Off"
+ * COMI[4] "Banding filter option"
+ * = 0 (0x00) ...0.... "Main clock is 48 MHz and
+ * the PLL is ON"
+ * COMI[3] "Reserved"
+ * = 0 (0x00) ....0...
+ * COMI[2] "AGC auto manual control selection"
+ * = 0 (0x00) .....0.. "Manual"
+ * COMI[1] "AWB auto manual control selection"
+ * = 0 (0x00) ......0. "Manual"
+ * COMI[0] "Exposure control"
+ * = 0 (0x00) .......0 "Manual"
+ */
+ { 0x13, 0xC0 },
+
+ /*
+ * 09 COMC "Common Control C"
+ * = 8 (0x08) 00001000
+ * COMC[7:5] "Reserved"
+ * = 0 (0x00) 000.....
+ * COMC[4] "Sleep Mode Enable"
+ * = 0 (0x00) ...0.... "Normal mode"
+ * COMC[3:2] "Sensor sampling reset timing selection"
+ * = 2 (0x02) ....10.. "Longer reset time"
+ * COMC[1:0] "Output drive current select"
+ * = 0 (0x00) ......00 "Weakest"
+ */
+ { 0x09, 0x08 },
+
+ /*
+ * 0C COMD "Common Control D"
+ * = 8 (0x08) 00001000
+ * COMD[7] "Reserved"
+ * = 0 (0x00) 0.......
+ * COMD[6] "Swap MSB and LSB at the output port"
+ * = 0 (0x00) .0...... "False"
+ * COMD[5:3] "Reserved"
+ * = 1 (0x01) ..001...
+ * COMD[2] "Output Average On Off"
+ * = 0 (0x00) .....0.. "Output Normal"
+ * COMD[1] "Sensor precharge voltage selection"
+ * = 0 (0x00) ......0. "Selects internal
+ * reference precharge
+ * voltage"
+ * COMD[0] "Snapshot option"
+ * = 0 (0x00) .......0 "Enable live video output
+ * after snapshot sequence"
+ */
+ { 0x0c, 0x08 },
+
+ /*
+ * 0D COME "Common Control E"
+ * = 161 (0xA1) 10100001
+ * COME[7] "Output average option"
+ * = 1 (0x01) 1....... "Output average of 4 pixels"
+ * COME[6] "Anti-blooming control"
+ * = 0 (0x00) .0...... "Off"
+ * COME[5:3] "Reserved"
+ * = 4 (0x04) ..100...
+ * COME[2] "Clock output power down pin status"
+ * = 0 (0x00) .....0.. "Tri-state data output pin
+ * on power down"
+ * COME[1] "Data output pin status selection at power down"
+ * = 0 (0x00) ......0. "Tri-state VSYNC, PCLK,
+ * HREF, and CHSYNC pins on
+ * power down"
+ * COME[0] "Auto zero circuit select"
+ * = 1 (0x01) .......1 "On"
+ */
+ { 0x0d, 0xA1 },
+
+ /*
+ * 0E COMF "Common Control F"
+ * = 112 (0x70) 01110000
+ * COMF[7] "System clock selection"
+ * = 0 (0x00) 0....... "Use 24 MHz system clock"
+ * COMF[6:4] "Reserved"
+ * = 7 (0x07) .111....
+ * COMF[3] "Manual auto negative offset canceling selection"
+ * = 0 (0x00) ....0... "Auto detect negative
+ * offset and cancel it"
+ * COMF[2:0] "Reserved"
+ * = 0 (0x00) .....000
+ */
+ { 0x0e, 0x70 },
+
+ /*
+ * 0F COMG "Common Control G"
+ * = 66 (0x42) 01000010
+ * COMG[7] "Optical black output selection"
+ * = 0 (0x00) 0....... "Disable"
+ * COMG[6] "Black level calibrate selection"
+ * = 1 (0x01) .1...... "Use optical black pixels
+ * to calibrate"
+ * COMG[5:4] "Reserved"
+ * = 0 (0x00) ..00....
+ * COMG[3] "Channel offset adjustment"
+ * = 0 (0x00) ....0... "Disable offset adjustment"
+ * COMG[2] "ADC black level calibration option"
+ * = 0 (0x00) .....0.. "Use B/G line and G/R
+ * line to calibrate each
+ * channel's black level"
+ * COMG[1] "Reserved"
+ * = 1 (0x01) ......1.
+ * COMG[0] "ADC black level calibration enable"
+ * = 0 (0x00) .......0 "Disable"
+ */
+ { 0x0f, 0x42 },
+
+ /*
+ * 14 COMJ "Common Control J"
+ * = 198 (0xC6) 11000110
+ * COMJ[7:6] "AGC gain ceiling"
+ * = 3 (0x03) 11...... "8x"
+ * COMJ[5:4] "Reserved"
+ * = 0 (0x00) ..00....
+ * COMJ[3] "Auto banding filter"
+ * = 0 (0x00) ....0... "Banding filter is always
+ * on off depending on
+ * COMI[5] setting"
+ * COMJ[2] "VSYNC drop option"
+ * = 1 (0x01) .....1.. "SYNC is dropped if frame
+ * data is dropped"
+ * COMJ[1] "Frame data drop"
+ * = 1 (0x01) ......1. "Drop frame data if
+ * exposure is not within
+ * tolerance. In AEC mode,
+ * data is normally dropped
+ * when data is out of
+ * range."
+ * COMJ[0] "Reserved"
+ * = 0 (0x00) .......0
+ */
+ { 0x14, 0xC6 },
+
+ /*
+ * 15 COMK "Common Control K"
+ * = 2 (0x02) 00000010
+ * COMK[7] "CHSYNC pin output swap"
+ * = 0 (0x00) 0....... "CHSYNC"
+ * COMK[6] "HREF pin output swap"
+ * = 0 (0x00) .0...... "HREF"
+ * COMK[5] "PCLK output selection"
+ * = 0 (0x00) ..0..... "PCLK always output"
+ * COMK[4] "PCLK edge selection"
+ * = 0 (0x00) ...0.... "Data valid on falling edge"
+ * COMK[3] "HREF output polarity"
+ * = 0 (0x00) ....0... "positive"
+ * COMK[2] "Reserved"
+ * = 0 (0x00) .....0..
+ * COMK[1] "VSYNC polarity"
+ * = 1 (0x01) ......1. "negative"
+ * COMK[0] "HSYNC polarity"
+ * = 0 (0x00) .......0 "positive"
+ */
+ { 0x15, 0x02 },
+
+ /*
+ * 33 CHLF "Current Control"
+ * = 9 (0x09) 00001001
+ * CHLF[7:6] "Sensor current control"
+ * = 0 (0x00) 00......
+ * CHLF[5] "Sensor current range control"
+ * = 0 (0x00) ..0..... "normal range"
+ * CHLF[4] "Sensor current"
+ * = 0 (0x00) ...0.... "normal current"
+ * CHLF[3] "Sensor buffer current control"
+ * = 1 (0x01) ....1... "half current"
+ * CHLF[2] "Column buffer current control"
+ * = 0 (0x00) .....0.. "normal current"
+ * CHLF[1] "Analog DSP current control"
+ * = 0 (0x00) ......0. "normal current"
+ * CHLF[1] "ADC current control"
+ * = 0 (0x00) ......0. "normal current"
+ */
+ { 0x33, 0x09 },
+
+ /*
+ * 34 VBLM "Blooming Control"
+ * = 80 (0x50) 01010000
+ * VBLM[7] "Hard soft reset switch"
+ * = 0 (0x00) 0....... "Hard reset"
+ * VBLM[6:4] "Blooming voltage selection"
+ * = 5 (0x05) .101....
+ * VBLM[3:0] "Sensor current control"
+ * = 0 (0x00) ....0000
+ */
+ { 0x34, 0x50 },
+
+ /*
+ * 36 VCHG "Sensor Precharge Voltage Control"
+ * = 0 (0x00) 00000000
+ * VCHG[7] "Reserved"
+ * = 0 (0x00) 0.......
+ * VCHG[6:4] "Sensor precharge voltage control"
+ * = 0 (0x00) .000....
+ * VCHG[3:0] "Sensor array common reference"
+ * = 0 (0x00) ....0000
+ */
+ { 0x36, 0x00 },
+
+ /*
+ * 37 ADC "ADC Reference Control"
+ * = 4 (0x04) 00000100
+ * ADC[7:4] "Reserved"
+ * = 0 (0x00) 0000....
+ * ADC[3] "ADC input signal range"
+ * = 0 (0x00) ....0... "Input signal 1.0x"
+ * ADC[2:0] "ADC range control"
+ * = 4 (0x04) .....100
+ */
+ { 0x37, 0x04 },
+
+ /*
+ * 38 ACOM "Analog Common Ground"
+ * = 82 (0x52) 01010010
+ * ACOM[7] "Analog gain control"
+ * = 0 (0x00) 0....... "Gain 1x"
+ * ACOM[6] "Analog black level calibration"
+ * = 1 (0x01) .1...... "On"
+ * ACOM[5:0] "Reserved"
+ * = 18 (0x12) ..010010
+ */
+ { 0x38, 0x52 },
+
+ /*
+ * 3A FREFA "Internal Reference Adjustment"
+ * = 0 (0x00) 00000000
+ * FREFA[7:0] "Range"
+ * = 0 (0x00) 00000000
+ */
+ { 0x3a, 0x00 },
+
+ /*
+ * 3C FVOPT "Internal Reference Adjustment"
+ * = 31 (0x1F) 00011111
+ * FVOPT[7:0] "Range"
+ * = 31 (0x1F) 00011111
+ */
+ { 0x3c, 0x1F },
+
+ /*
+ * 44 Undocumented = 0 (0x00) 00000000
+ * 44[7:0] "It's a secret"
+ * = 0 (0x00) 00000000
+ */
+ { 0x44, 0x00 },
+
+ /*
+ * 40 Undocumented = 0 (0x00) 00000000
+ * 40[7:0] "It's a secret"
+ * = 0 (0x00) 00000000
+ */
+ { 0x40, 0x00 },
+
+ /*
+ * 41 Undocumented = 0 (0x00) 00000000
+ * 41[7:0] "It's a secret"
+ * = 0 (0x00) 00000000
+ */
+ { 0x41, 0x00 },
+
+ /*
+ * 42 Undocumented = 0 (0x00) 00000000
+ * 42[7:0] "It's a secret"
+ * = 0 (0x00) 00000000
+ */
+ { 0x42, 0x00 },
+
+ /*
+ * 43 Undocumented = 0 (0x00) 00000000
+ * 43[7:0] "It's a secret"
+ * = 0 (0x00) 00000000
+ */
+ { 0x43, 0x00 },
+
+ /*
+ * 45 Undocumented = 128 (0x80) 10000000
+ * 45[7:0] "It's a secret"
+ * = 128 (0x80) 10000000
+ */
+ { 0x45, 0x80 },
+
+ /*
+ * 48 Undocumented = 192 (0xC0) 11000000
+ * 48[7:0] "It's a secret"
+ * = 192 (0xC0) 11000000
+ */
+ { 0x48, 0xC0 },
+
+ /*
+ * 49 Undocumented = 25 (0x19) 00011001
+ * 49[7:0] "It's a secret"
+ * = 25 (0x19) 00011001
+ */
+ { 0x49, 0x19 },
+
+ /*
+ * 4B Undocumented = 128 (0x80) 10000000
+ * 4B[7:0] "It's a secret"
+ * = 128 (0x80) 10000000
+ */
+ { 0x4B, 0x80 },
+
+ /*
+ * 4D Undocumented = 196 (0xC4) 11000100
+ * 4D[7:0] "It's a secret"
+ * = 196 (0xC4) 11000100
+ */
+ { 0x4D, 0xC4 },
+
+ /*
+ * 35 VREF "Reference Voltage Control"
+ * = 76 (0x4C) 01001100
+ * VREF[7:5] "Column high reference control"
+ * = 2 (0x02) 010..... "higher voltage"
+ * VREF[4:2] "Column low reference control"
+ * = 3 (0x03) ...011.. "Highest voltage"
+ * VREF[1:0] "Reserved"
+ * = 0 (0x00) ......00
+ */
+ { 0x35, 0x4C },
+
+ /*
+ * 3D Undocumented = 0 (0x00) 00000000
+ * 3D[7:0] "It's a secret"
+ * = 0 (0x00) 00000000
+ */
+ { 0x3D, 0x00 },
+
+ /*
+ * 3E Undocumented = 0 (0x00) 00000000
+ * 3E[7:0] "It's a secret"
+ * = 0 (0x00) 00000000
+ */
+ { 0x3E, 0x00 },
+
+ /*
+ * 3B FREFB "Internal Reference Adjustment"
+ * = 24 (0x18) 00011000
+ * FREFB[7:0] "Range"
+ * = 24 (0x18) 00011000
+ */
+ { 0x3b, 0x18 },
+
+ /*
+ * 33 CHLF "Current Control"
+ * = 25 (0x19) 00011001
+ * CHLF[7:6] "Sensor current control"
+ * = 0 (0x00) 00......
+ * CHLF[5] "Sensor current range control"
+ * = 0 (0x00) ..0..... "normal range"
+ * CHLF[4] "Sensor current"
+ * = 1 (0x01) ...1.... "double current"
+ * CHLF[3] "Sensor buffer current control"
+ * = 1 (0x01) ....1... "half current"
+ * CHLF[2] "Column buffer current control"
+ * = 0 (0x00) .....0.. "normal current"
+ * CHLF[1] "Analog DSP current control"
+ * = 0 (0x00) ......0. "normal current"
+ * CHLF[1] "ADC current control"
+ * = 0 (0x00) ......0. "normal current"
+ */
+ { 0x33, 0x19 },
+
+ /*
+ * 34 VBLM "Blooming Control"
+ * = 90 (0x5A) 01011010
+ * VBLM[7] "Hard soft reset switch"
+ * = 0 (0x00) 0....... "Hard reset"
+ * VBLM[6:4] "Blooming voltage selection"
+ * = 5 (0x05) .101....
+ * VBLM[3:0] "Sensor current control"
+ * = 10 (0x0A) ....1010
+ */
+ { 0x34, 0x5A },
+
+ /*
+ * 3B FREFB "Internal Reference Adjustment"
+ * = 0 (0x00) 00000000
+ * FREFB[7:0] "Range"
+ * = 0 (0x00) 00000000
+ */
+ { 0x3b, 0x00 },
+
+ /*
+ * 33 CHLF "Current Control"
+ * = 9 (0x09) 00001001
+ * CHLF[7:6] "Sensor current control"
+ * = 0 (0x00) 00......
+ * CHLF[5] "Sensor current range control"
+ * = 0 (0x00) ..0..... "normal range"
+ * CHLF[4] "Sensor current"
+ * = 0 (0x00) ...0.... "normal current"
+ * CHLF[3] "Sensor buffer current control"
+ * = 1 (0x01) ....1... "half current"
+ * CHLF[2] "Column buffer current control"
+ * = 0 (0x00) .....0.. "normal current"
+ * CHLF[1] "Analog DSP current control"
+ * = 0 (0x00) ......0. "normal current"
+ * CHLF[1] "ADC current control"
+ * = 0 (0x00) ......0. "normal current"
+ */
+ { 0x33, 0x09 },
+
+ /*
+ * 34 VBLM "Blooming Control"
+ * = 80 (0x50) 01010000
+ * VBLM[7] "Hard soft reset switch"
+ * = 0 (0x00) 0....... "Hard reset"
+ * VBLM[6:4] "Blooming voltage selection"
+ * = 5 (0x05) .101....
+ * VBLM[3:0] "Sensor current control"
+ * = 0 (0x00) ....0000
+ */
+ { 0x34, 0x50 },
+
+ /*
+ * 12 COMH "Common Control H"
+ * = 64 (0x40) 01000000
+ * COMH[7] "SRST"
+ * = 0 (0x00) 0....... "No-op"
+ * COMH[6:4] "Resolution selection"
+ * = 4 (0x04) .100.... "XGA"
+ * COMH[3] "Master slave selection"
+ * = 0 (0x00) ....0... "Master mode"
+ * COMH[2] "Internal B/R channel option"
+ * = 0 (0x00) .....0.. "B/R use same channel"
+ * COMH[1] "Color bar test pattern"
+ * = 0 (0x00) ......0. "Off"
+ * COMH[0] "Reserved"
+ * = 0 (0x00) .......0
+ */
+ { 0x12, 0x40 },
+
+ /*
+ * 17 HREFST "Horizontal window start"
+ * = 31 (0x1F) 00011111
+ * HREFST[7:0] "Horizontal window start, 8 MSBs"
+ * = 31 (0x1F) 00011111
+ */
+ { 0x17, 0x1F },
+
+ /*
+ * 18 HREFEND "Horizontal window end"
+ * = 95 (0x5F) 01011111
+ * HREFEND[7:0] "Horizontal Window End, 8 MSBs"
+ * = 95 (0x5F) 01011111
+ */
+ { 0x18, 0x5F },
+
+ /*
+ * 19 VSTRT "Vertical window start"
+ * = 0 (0x00) 00000000
+ * VSTRT[7:0] "Vertical Window Start, 8 MSBs"
+ * = 0 (0x00) 00000000
+ */
+ { 0x19, 0x00 },
+
+ /*
+ * 1A VEND "Vertical window end"
+ * = 96 (0x60) 01100000
+ * VEND[7:0] "Vertical Window End, 8 MSBs"
+ * = 96 (0x60) 01100000
+ */
+ { 0x1a, 0x60 },
+
+ /*
+ * 32 COMM "Common Control M"
+ * = 18 (0x12) 00010010
+ * COMM[7:6] "Pixel clock divide option"
+ * = 0 (0x00) 00...... "/1"
+ * COMM[5:3] "Horizontal window end position, 3 LSBs"
+ * = 2 (0x02) ..010...
+ * COMM[2:0] "Horizontal window start position, 3 LSBs"
+ * = 2 (0x02) .....010
+ */
+ { 0x32, 0x12 },
+
+ /*
+ * 03 COMA "Common Control A"
+ * = 74 (0x4A) 01001010
+ * COMA[7:4] "AWB Update Threshold"
+ * = 4 (0x04) 0100....
+ * COMA[3:2] "Vertical window end line control 2 LSBs"
+ * = 2 (0x02) ....10..
+ * COMA[1:0] "Vertical window start line control 2 LSBs"
+ * = 2 (0x02) ......10
+ */
+ { 0x03, 0x4A },
+
+ /*
+ * 11 CLKRC "Clock Rate Control"
+ * = 128 (0x80) 10000000
+ * CLKRC[7] "Internal frequency doublers on off seclection"
+ * = 1 (0x01) 1....... "On"
+ * CLKRC[6] "Digital video master slave selection"
+ * = 0 (0x00) .0...... "Master mode, sensor
+ * provides PCLK"
+ * CLKRC[5:0] "Clock divider { CLK = PCLK/(1+CLKRC[5:0]) }"
+ * = 0 (0x00) ..000000
+ */
+ { 0x11, 0x80 },
+
+ /*
+ * 12 COMH "Common Control H"
+ * = 0 (0x00) 00000000
+ * COMH[7] "SRST"
+ * = 0 (0x00) 0....... "No-op"
+ * COMH[6:4] "Resolution selection"
+ * = 0 (0x00) .000.... "QXGA"
+ * COMH[3] "Master slave selection"
+ * = 0 (0x00) ....0... "Master mode"
+ * COMH[2] "Internal B/R channel option"
+ * = 0 (0x00) .....0.. "B/R use same channel"
+ * COMH[1] "Color bar test pattern"
+ * = 0 (0x00) ......0. "Off"
+ * COMH[0] "Reserved"
+ * = 0 (0x00) .......0
+ */
+ { 0x12, 0x00 },
+
+ /*
+ * 12 COMH "Common Control H"
+ * = 64 (0x40) 01000000
+ * COMH[7] "SRST"
+ * = 0 (0x00) 0....... "No-op"
+ * COMH[6:4] "Resolution selection"
+ * = 4 (0x04) .100.... "XGA"
+ * COMH[3] "Master slave selection"
+ * = 0 (0x00) ....0... "Master mode"
+ * COMH[2] "Internal B/R channel option"
+ * = 0 (0x00) .....0.. "B/R use same channel"
+ * COMH[1] "Color bar test pattern"
+ * = 0 (0x00) ......0. "Off"
+ * COMH[0] "Reserved"
+ * = 0 (0x00) .......0
+ */
+ { 0x12, 0x40 },
+
+ /*
+ * 17 HREFST "Horizontal window start"
+ * = 31 (0x1F) 00011111
+ * HREFST[7:0] "Horizontal window start, 8 MSBs"
+ * = 31 (0x1F) 00011111
+ */
+ { 0x17, 0x1F },
+
+ /*
+ * 18 HREFEND "Horizontal window end"
+ * = 95 (0x5F) 01011111
+ * HREFEND[7:0] "Horizontal Window End, 8 MSBs"
+ * = 95 (0x5F) 01011111
+ */
+ { 0x18, 0x5F },
+
+ /*
+ * 19 VSTRT "Vertical window start"
+ * = 0 (0x00) 00000000
+ * VSTRT[7:0] "Vertical Window Start, 8 MSBs"
+ * = 0 (0x00) 00000000
+ */
+ { 0x19, 0x00 },
+
+ /*
+ * 1A VEND "Vertical window end"
+ * = 96 (0x60) 01100000
+ * VEND[7:0] "Vertical Window End, 8 MSBs"
+ * = 96 (0x60) 01100000
+ */
+ { 0x1a, 0x60 },
+
+ /*
+ * 32 COMM "Common Control M"
+ * = 18 (0x12) 00010010
+ * COMM[7:6] "Pixel clock divide option"
+ * = 0 (0x00) 00...... "/1"
+ * COMM[5:3] "Horizontal window end position, 3 LSBs"
+ * = 2 (0x02) ..010...
+ * COMM[2:0] "Horizontal window start position, 3 LSBs"
+ * = 2 (0x02) .....010
+ */
+ { 0x32, 0x12 },
+
+ /*
+ * 03 COMA "Common Control A"
+ * = 74 (0x4A) 01001010
+ * COMA[7:4] "AWB Update Threshold"
+ * = 4 (0x04) 0100....
+ * COMA[3:2] "Vertical window end line control 2 LSBs"
+ * = 2 (0x02) ....10..
+ * COMA[1:0] "Vertical window start line control 2 LSBs"
+ * = 2 (0x02) ......10
+ */
+ { 0x03, 0x4A },
+
+ /*
+ * 02 RED "Red Gain Control"
+ * = 175 (0xAF) 10101111
+ * RED[7] "Action"
+ * = 1 (0x01) 1....... "gain = 1/(1+bitrev([6:0]))"
+ * RED[6:0] "Value"
+ * = 47 (0x2F) .0101111
+ */
+ { 0x02, 0xAF },
+
+ /*
+ * 2D ADDVSL "VSYNC Pulse Width"
+ * = 210 (0xD2) 11010010
+ * ADDVSL[7:0] "VSYNC pulse width, LSB"
+ * = 210 (0xD2) 11010010
+ */
+ { 0x2d, 0xD2 },
+
+ /*
+ * 00 GAIN = 24 (0x18) 00011000
+ * GAIN[7:6] "Reserved"
+ * = 0 (0x00) 00......
+ * GAIN[5] "Double"
+ * = 0 (0x00) ..0..... "False"
+ * GAIN[4] "Double"
+ * = 1 (0x01) ...1.... "True"
+ * GAIN[3:0] "Range"
+ * = 8 (0x08) ....1000
+ */
+ { 0x00, 0x18 },
+
+ /*
+ * 01 BLUE "Blue Gain Control"
+ * = 240 (0xF0) 11110000
+ * BLUE[7] "Action"
+ * = 1 (0x01) 1....... "gain = 1/(1+bitrev([6:0]))"
+ * BLUE[6:0] "Value"
+ * = 112 (0x70) .1110000
+ */
+ { 0x01, 0xF0 },
+
+ /*
+ * 10 AEC "Automatic Exposure Control"
+ * = 10 (0x0A) 00001010
+ * AEC[7:0] "Automatic Exposure Control, 8 MSBs"
+ * = 10 (0x0A) 00001010
+ */
+ { 0x10, 0x0A },
+
+ { 0xE1, 0x67 },
+ { 0xE3, 0x03 },
+ { 0xE4, 0x26 },
+ { 0xE5, 0x3E },
+ { 0xF8, 0x01 },
+ { 0xFF, 0x01 },
+};
+
static const struct ov_i2c_regvals norm_6x20[] = {
{ 0x12, 0x80 }, /* reset */
{ 0x11, 0x01 },
@@ -678,6 +1488,7 @@
};
static const struct ov_i2c_regvals norm_7620[] = {
+ { 0x12, 0x80 }, /* reset */
{ 0x00, 0x00 }, /* gain */
{ 0x01, 0x80 }, /* blue gain */
{ 0x02, 0x80 }, /* red gain */
@@ -1042,10 +1853,28 @@
}
/* Write a OV519 register */
-static int reg_w(struct sd *sd, __u16 index, __u8 value)
+static int reg_w(struct sd *sd, __u16 index, __u16 value)
{
- int ret;
- int req = (sd->bridge <= BRIDGE_OV511PLUS) ? 2 : 1;
+ int ret, req = 0;
+
+ switch (sd->bridge) {
+ case BRIDGE_OV511:
+ case BRIDGE_OV511PLUS:
+ req = 2;
+ break;
+ case BRIDGE_OVFX2:
+ req = 0x0a;
+ /* fall through */
+ case BRIDGE_W9968CF:
+ ret = usb_control_msg(sd->gspca_dev.dev,
+ usb_sndctrlpipe(sd->gspca_dev.dev, 0),
+ req,
+ USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ value, index, NULL, 0, 500);
+ goto leave;
+ default:
+ req = 1;
+ }
sd->gspca_dev.usb_buf[0] = value;
ret = usb_control_msg(sd->gspca_dev.dev,
@@ -1054,17 +1883,35 @@
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
0, index,
sd->gspca_dev.usb_buf, 1, 500);
- if (ret < 0)
- PDEBUG(D_ERR, "Write reg [%02x] %02x failed", index, value);
- return ret;
+leave:
+ if (ret < 0) {
+ PDEBUG(D_ERR, "Write reg 0x%04x -> [0x%02x] failed",
+ value, index);
+ return ret;
+ }
+
+ PDEBUG(D_USBO, "Write reg 0x%04x -> [0x%02x]", value, index);
+ return 0;
}
-/* Read from a OV519 register */
+/* Read from a OV519 register, note not valid for the w9968cf!! */
/* returns: negative is error, pos or zero is data */
static int reg_r(struct sd *sd, __u16 index)
{
int ret;
- int req = (sd->bridge <= BRIDGE_OV511PLUS) ? 3 : 1;
+ int req;
+
+ switch (sd->bridge) {
+ case BRIDGE_OV511:
+ case BRIDGE_OV511PLUS:
+ req = 3;
+ break;
+ case BRIDGE_OVFX2:
+ req = 0x0b;
+ break;
+ default:
+ req = 1;
+ }
ret = usb_control_msg(sd->gspca_dev.dev,
usb_rcvctrlpipe(sd->gspca_dev.dev, 0),
@@ -1072,10 +1919,12 @@
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
0, index, sd->gspca_dev.usb_buf, 1, 500);
- if (ret >= 0)
+ if (ret >= 0) {
ret = sd->gspca_dev.usb_buf[0];
- else
+ PDEBUG(D_USBI, "Read reg [0x%02X] -> 0x%04X", index, ret);
+ } else
PDEBUG(D_ERR, "Read reg [0x%02x] failed", index);
+
return ret;
}
@@ -1095,6 +1944,7 @@
ret = sd->gspca_dev.usb_buf[0];
else
PDEBUG(D_ERR, "Read reg 8 [0x%02x] failed", index);
+
return ret;
}
@@ -1140,9 +1990,12 @@
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
0, index,
sd->gspca_dev.usb_buf, n, 500);
- if (ret < 0)
+ if (ret < 0) {
PDEBUG(D_ERR, "Write reg32 [%02x] %08x failed", index, value);
- return ret;
+ return ret;
+ }
+
+ return 0;
}
static int ov511_i2c_w(struct sd *sd, __u8 reg, __u8 value)
@@ -1324,32 +2177,110 @@
return value;
}
+static int ovfx2_i2c_w(struct sd *sd, __u8 reg, __u8 value)
+{
+ int ret;
+
+ ret = usb_control_msg(sd->gspca_dev.dev,
+ usb_sndctrlpipe(sd->gspca_dev.dev, 0),
+ 0x02,
+ USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ (__u16)value, (__u16)reg, NULL, 0, 500);
+
+ if (ret < 0) {
+ PDEBUG(D_ERR, "i2c 0x%02x -> [0x%02x] failed", value, reg);
+ return ret;
+ }
+
+ PDEBUG(D_USBO, "i2c 0x%02x -> [0x%02x]", value, reg);
+ return 0;
+}
+
+static int ovfx2_i2c_r(struct sd *sd, __u8 reg)
+{
+ int ret;
+
+ ret = usb_control_msg(sd->gspca_dev.dev,
+ usb_rcvctrlpipe(sd->gspca_dev.dev, 0),
+ 0x03,
+ USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ 0, (__u16)reg, sd->gspca_dev.usb_buf, 1, 500);
+
+ if (ret >= 0) {
+ ret = sd->gspca_dev.usb_buf[0];
+ PDEBUG(D_USBI, "i2c [0x%02X] -> 0x%02X", reg, ret);
+ } else
+ PDEBUG(D_ERR, "i2c read [0x%02x] failed", reg);
+
+ return ret;
+}
+
static int i2c_w(struct sd *sd, __u8 reg, __u8 value)
{
+ int ret = -1;
+
+ if (sd->sensor_reg_cache[reg] == value)
+ return 0;
+
switch (sd->bridge) {
case BRIDGE_OV511:
case BRIDGE_OV511PLUS:
- return ov511_i2c_w(sd, reg, value);
+ ret = ov511_i2c_w(sd, reg, value);
+ break;
case BRIDGE_OV518:
case BRIDGE_OV518PLUS:
case BRIDGE_OV519:
- return ov518_i2c_w(sd, reg, value);
+ ret = ov518_i2c_w(sd, reg, value);
+ break;
+ case BRIDGE_OVFX2:
+ ret = ovfx2_i2c_w(sd, reg, value);
+ break;
+ case BRIDGE_W9968CF:
+ ret = w9968cf_i2c_w(sd, reg, value);
+ break;
}
- return -1; /* Should never happen */
+
+ if (ret >= 0) {
+ /* Up on sensor reset empty the register cache */
+ if (reg == 0x12 && (value & 0x80))
+ memset(sd->sensor_reg_cache, -1,
+ sizeof(sd->sensor_reg_cache));
+ else
+ sd->sensor_reg_cache[reg] = value;
+ }
+
+ return ret;
}
static int i2c_r(struct sd *sd, __u8 reg)
{
+ int ret = -1;
+
+ if (sd->sensor_reg_cache[reg] != -1)
+ return sd->sensor_reg_cache[reg];
+
switch (sd->bridge) {
case BRIDGE_OV511:
case BRIDGE_OV511PLUS:
- return ov511_i2c_r(sd, reg);
+ ret = ov511_i2c_r(sd, reg);
+ break;
case BRIDGE_OV518:
case BRIDGE_OV518PLUS:
case BRIDGE_OV519:
- return ov518_i2c_r(sd, reg);
+ ret = ov518_i2c_r(sd, reg);
+ break;
+ case BRIDGE_OVFX2:
+ ret = ovfx2_i2c_r(sd, reg);
+ break;
+ case BRIDGE_W9968CF:
+ ret = w9968cf_i2c_r(sd, reg);
+ break;
}
- return -1; /* Should never happen */
+
+ if (ret >= 0)
+ sd->sensor_reg_cache[reg] = ret;
+
+ return ret;
}
/* Writes bits at positions specified by mask to an I2C reg. Bits that are in
@@ -1389,6 +2320,10 @@
return reg_w_mask(sd, R51x_SYS_RESET, 0x3a, 0x3a);
case BRIDGE_OV519:
return reg_w(sd, OV519_SYS_RESET1, 0x0f);
+ case BRIDGE_OVFX2:
+ return reg_w_mask(sd, 0x0f, 0x00, 0x02);
+ case BRIDGE_W9968CF:
+ return reg_w(sd, 0x3c, 0x0a05); /* stop USB transfer */
}
return 0;
@@ -1418,18 +2353,27 @@
return reg_w(sd, R51x_SYS_RESET, 0x00);
case BRIDGE_OV519:
return reg_w(sd, OV519_SYS_RESET1, 0x00);
+ case BRIDGE_OVFX2:
+ return reg_w_mask(sd, 0x0f, 0x02, 0x02);
+ case BRIDGE_W9968CF:
+ return reg_w(sd, 0x3c, 0x8a05); /* USB FIFO enable */
}
return 0;
}
+static int ov51x_set_slave_ids(struct sd *sd, __u8 slave);
+
/* This does an initial reset of an OmniVision sensor and ensures that I2C
* is synchronized. Returns <0 on failure.
*/
-static int init_ov_sensor(struct sd *sd)
+static int init_ov_sensor(struct sd *sd, __u8 slave)
{
int i;
+ if (ov51x_set_slave_ids(sd, slave) < 0)
+ return -EIO;
+
/* Reset the sensor */
if (i2c_w(sd, 0x12, 0x80) < 0)
return -EIO;
@@ -1466,6 +2410,14 @@
{
int rc;
+ switch (sd->bridge) {
+ case BRIDGE_OVFX2:
+ return reg_w(sd, OVFX2_I2C_ADDR, slave);
+ case BRIDGE_W9968CF:
+ sd->sensor_addr = slave;
+ return 0;
+ }
+
rc = reg_w(sd, R51x_I2C_W_SID, slave);
if (rc < 0)
return rc;
@@ -1508,6 +2460,39 @@
*
***************************************************************************/
+/* This initializes the OV2x10 / OV3610 / OV3620 */
+static int ov_hires_configure(struct sd *sd)
+{
+ int high, low;
+
+ if (sd->bridge != BRIDGE_OVFX2) {
+ PDEBUG(D_ERR, "error hires sensors only supported with ovfx2");
+ return -1;
+ }
+
+ PDEBUG(D_PROBE, "starting ov hires configuration");
+
+ /* Detect sensor (sub)type */
+ high = i2c_r(sd, 0x0a);
+ low = i2c_r(sd, 0x0b);
+ /* info("%x, %x", high, low); */
+ if (high == 0x96 && low == 0x40) {
+ PDEBUG(D_PROBE, "Sensor is an OV2610");
+ sd->sensor = SEN_OV2610;
+ } else if (high == 0x36 && (low & 0x0f) == 0x00) {
+ PDEBUG(D_PROBE, "Sensor is an OV3610");
+ sd->sensor = SEN_OV3610;
+ } else {
+ PDEBUG(D_ERR, "Error unknown sensor type: 0x%02x%02x",
+ high, low);
+ return -1;
+ }
+
+ /* Set sensor-specific vars */
+ return 0;
+}
+
+
/* This initializes the OV8110, OV8610 sensor. The OV8110 uses
* the same register settings as the OV8610, since they are very similar.
*/
@@ -1966,12 +2951,29 @@
return write_regvals(sd, init_519, ARRAY_SIZE(init_519));
}
+static int ovfx2_configure(struct sd *sd)
+{
+ static const struct ov_regvals init_fx2[] = {
+ { 0x00, 0x60 },
+ { 0x02, 0x01 },
+ { 0x0f, 0x1d },
+ { 0xe9, 0x82 },
+ { 0xea, 0xc7 },
+ { 0xeb, 0x10 },
+ { 0xec, 0xf6 },
+ };
+
+ sd->stopped = 1;
+
+ return write_regvals(sd, init_fx2, ARRAY_SIZE(init_fx2));
+}
+
/* this function is called at probe time */
static int sd_config(struct gspca_dev *gspca_dev,
const struct usb_device_id *id)
{
struct sd *sd = (struct sd *) gspca_dev;
- struct cam *cam;
+ struct cam *cam = &gspca_dev->cam;
int ret = 0;
sd->bridge = id->driver_info & BRIDGE_MASK;
@@ -1989,6 +2991,16 @@
case BRIDGE_OV519:
ret = ov519_configure(sd);
break;
+ case BRIDGE_OVFX2:
+ ret = ovfx2_configure(sd);
+ cam->bulk_size = OVFX2_BULK_SIZE;
+ cam->bulk_nurbs = MAX_NURBS;
+ cam->bulk = 1;
+ break;
+ case BRIDGE_W9968CF:
+ ret = w9968cf_configure(sd);
+ cam->reverse_alts = 1;
+ break;
}
if (ret)
@@ -1996,49 +3008,39 @@
ov51x_led_control(sd, 0); /* turn LED off */
- /* Test for 76xx */
- if (ov51x_set_slave_ids(sd, OV7xx0_SID) < 0)
- goto error;
-
/* The OV519 must be more aggressive about sensor detection since
* I2C write will never fail if the sensor is not present. We have
* to try to initialize the sensor to detect its presence */
- if (init_ov_sensor(sd) >= 0) {
+
+ /* Test for 76xx */
+ if (init_ov_sensor(sd, OV7xx0_SID) >= 0) {
if (ov7xx0_configure(sd) < 0) {
PDEBUG(D_ERR, "Failed to configure OV7xx0");
goto error;
}
- } else {
-
- /* Test for 6xx0 */
- if (ov51x_set_slave_ids(sd, OV6xx0_SID) < 0)
+ /* Test for 6xx0 */
+ } else if (init_ov_sensor(sd, OV6xx0_SID) >= 0) {
+ if (ov6xx0_configure(sd) < 0) {
+ PDEBUG(D_ERR, "Failed to configure OV6xx0");
goto error;
-
- if (init_ov_sensor(sd) >= 0) {
- if (ov6xx0_configure(sd) < 0) {
- PDEBUG(D_ERR, "Failed to configure OV6xx0");
- goto error;
- }
- } else {
-
- /* Test for 8xx0 */
- if (ov51x_set_slave_ids(sd, OV8xx0_SID) < 0)
- goto error;
-
- if (init_ov_sensor(sd) < 0) {
- PDEBUG(D_ERR,
- "Can't determine sensor slave IDs");
- goto error;
- }
- if (ov8xx0_configure(sd) < 0) {
- PDEBUG(D_ERR,
- "Failed to configure OV8xx0 sensor");
- goto error;
- }
}
+ /* Test for 8xx0 */
+ } else if (init_ov_sensor(sd, OV8xx0_SID) >= 0) {
+ if (ov8xx0_configure(sd) < 0) {
+ PDEBUG(D_ERR, "Failed to configure OV8xx0");
+ goto error;
+ }
+ /* Test for 3xxx / 2xxx */
+ } else if (init_ov_sensor(sd, OV_HIRES_SID) >= 0) {
+ if (ov_hires_configure(sd) < 0) {
+ PDEBUG(D_ERR, "Failed to configure high res OV");
+ goto error;
+ }
+ } else {
+ PDEBUG(D_ERR, "Can't determine sensor slave IDs");
+ goto error;
}
- cam = &gspca_dev->cam;
switch (sd->bridge) {
case BRIDGE_OV511:
case BRIDGE_OV511PLUS:
@@ -2069,6 +3071,31 @@
cam->nmodes = ARRAY_SIZE(ov519_sif_mode);
}
break;
+ case BRIDGE_OVFX2:
+ if (sd->sensor == SEN_OV2610) {
+ cam->cam_mode = ovfx2_ov2610_mode;
+ cam->nmodes = ARRAY_SIZE(ovfx2_ov2610_mode);
+ } else if (sd->sensor == SEN_OV3610) {
+ cam->cam_mode = ovfx2_ov3610_mode;
+ cam->nmodes = ARRAY_SIZE(ovfx2_ov3610_mode);
+ } else if (!sd->sif) {
+ cam->cam_mode = ov519_vga_mode;
+ cam->nmodes = ARRAY_SIZE(ov519_vga_mode);
+ } else {
+ cam->cam_mode = ov519_sif_mode;
+ cam->nmodes = ARRAY_SIZE(ov519_sif_mode);
+ }
+ break;
+ case BRIDGE_W9968CF:
+ cam->cam_mode = w9968cf_vga_mode;
+ cam->nmodes = ARRAY_SIZE(w9968cf_vga_mode);
+ if (sd->sif)
+ cam->nmodes--;
+
+ /* w9968cf needs initialisation once the sensor is known */
+ if (w9968cf_init(sd) < 0)
+ goto error;
+ break;
}
sd->brightness = BRIGHTNESS_DEF;
if (sd->sensor == SEN_OV6630 || sd->sensor == SEN_OV66308AF)
@@ -2087,11 +3114,15 @@
gspca_dev->ctrl_dis = (1 << HFLIP_IDX) | (1 << VFLIP_IDX) |
(1 << OV7670_FREQ_IDX);
}
+ sd->quality = QUALITY_DEF;
if (sd->sensor == SEN_OV7640 || sd->sensor == SEN_OV7670)
gspca_dev->ctrl_dis |= 1 << AUTOBRIGHT_IDX;
/* OV8610 Frequency filter control should work but needs testing */
if (sd->sensor == SEN_OV8610)
gspca_dev->ctrl_dis |= 1 << FREQ_IDX;
+ /* No controls for the OV2610/OV3610 */
+ if (sd->sensor == SEN_OV2610 || sd->sensor == SEN_OV3610)
+ gspca_dev->ctrl_dis |= 0xFF;
return 0;
error:
@@ -2106,6 +3137,20 @@
/* initialize the sensor */
switch (sd->sensor) {
+ case SEN_OV2610:
+ if (write_i2c_regvals(sd, norm_2610, ARRAY_SIZE(norm_2610)))
+ return -EIO;
+ /* Enable autogain, autoexpo, awb, bandfilter */
+ if (i2c_w_mask(sd, 0x13, 0x27, 0x27) < 0)
+ return -EIO;
+ break;
+ case SEN_OV3610:
+ if (write_i2c_regvals(sd, norm_3620b, ARRAY_SIZE(norm_3620b)))
+ return -EIO;
+ /* Enable autogain, autoexpo, awb, bandfilter */
+ if (i2c_w_mask(sd, 0x13, 0x27, 0x27) < 0)
+ return -EIO;
+ break;
case SEN_OV6620:
if (write_i2c_regvals(sd, norm_6x20, ARRAY_SIZE(norm_6x20)))
return -EIO;
@@ -2548,19 +3593,60 @@
static int mode_init_ov_sensor_regs(struct sd *sd)
{
struct gspca_dev *gspca_dev;
- int qvga;
+ int qvga, xstart, xend, ystart, yend;
+ __u8 v;
gspca_dev = &sd->gspca_dev;
qvga = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv & 1;
/******** Mode (VGA/QVGA) and sensor specific regs ********/
switch (sd->sensor) {
+ case SEN_OV2610:
+ i2c_w_mask(sd, 0x14, qvga ? 0x20 : 0x00, 0x20);
+ i2c_w_mask(sd, 0x28, qvga ? 0x00 : 0x20, 0x20);
+ i2c_w(sd, 0x24, qvga ? 0x20 : 0x3a);
+ i2c_w(sd, 0x25, qvga ? 0x30 : 0x60);
+ i2c_w_mask(sd, 0x2d, qvga ? 0x40 : 0x00, 0x40);
+ i2c_w_mask(sd, 0x67, qvga ? 0xf0 : 0x90, 0xf0);
+ i2c_w_mask(sd, 0x74, qvga ? 0x20 : 0x00, 0x20);
+ return 0;
+ case SEN_OV3610:
+ if (qvga) {
+ xstart = (1040 - gspca_dev->width) / 2 + (0x1f << 4);
+ ystart = (776 - gspca_dev->height) / 2;
+ } else {
+ xstart = (2076 - gspca_dev->width) / 2 + (0x10 << 4);
+ ystart = (1544 - gspca_dev->height) / 2;
+ }
+ xend = xstart + gspca_dev->width;
+ yend = ystart + gspca_dev->height;
+ /* Writing to the COMH register resets the other windowing regs
+ to their default values, so we must do this first. */
+ i2c_w_mask(sd, 0x12, qvga ? 0x40 : 0x00, 0xf0);
+ i2c_w_mask(sd, 0x32,
+ (((xend >> 1) & 7) << 3) | ((xstart >> 1) & 7),
+ 0x3f);
+ i2c_w_mask(sd, 0x03,
+ (((yend >> 1) & 3) << 2) | ((ystart >> 1) & 3),
+ 0x0f);
+ i2c_w(sd, 0x17, xstart >> 4);
+ i2c_w(sd, 0x18, xend >> 4);
+ i2c_w(sd, 0x19, ystart >> 3);
+ i2c_w(sd, 0x1a, yend >> 3);
+ return 0;
case SEN_OV8610:
/* For OV8610 qvga means qsvga */
i2c_w_mask(sd, OV7610_REG_COM_C, qvga ? (1 << 5) : 0, 1 << 5);
+ i2c_w_mask(sd, 0x13, 0x00, 0x20); /* Select 16 bit data bus */
+ i2c_w_mask(sd, 0x12, 0x04, 0x06); /* AWB: 1 Test pattern: 0 */
+ i2c_w_mask(sd, 0x2d, 0x00, 0x40); /* from windrv 090403 */
+ i2c_w_mask(sd, 0x28, 0x20, 0x20); /* progressive mode on */
break;
case SEN_OV7610:
i2c_w_mask(sd, 0x14, qvga ? 0x20 : 0x00, 0x20);
+ i2c_w(sd, 0x35, qvga?0x1e:0x9e);
+ i2c_w_mask(sd, 0x13, 0x00, 0x20); /* Select 16 bit data bus */
+ i2c_w_mask(sd, 0x12, 0x04, 0x06); /* AWB: 1 Test pattern: 0 */
break;
case SEN_OV7620:
case SEN_OV76BE:
@@ -2571,6 +3657,10 @@
i2c_w_mask(sd, 0x2d, qvga ? 0x40 : 0x00, 0x40);
i2c_w_mask(sd, 0x67, qvga ? 0xb0 : 0x90, 0xf0);
i2c_w_mask(sd, 0x74, qvga ? 0x20 : 0x00, 0x20);
+ i2c_w_mask(sd, 0x13, 0x00, 0x20); /* Select 16 bit data bus */
+ i2c_w_mask(sd, 0x12, 0x04, 0x06); /* AWB: 1 Test pattern: 0 */
+ if (sd->sensor == SEN_OV76BE)
+ i2c_w(sd, 0x35, qvga ? 0x1e : 0x9e);
break;
case SEN_OV7640:
i2c_w_mask(sd, 0x14, qvga ? 0x20 : 0x00, 0x20);
@@ -2580,6 +3670,7 @@
/* i2c_w_mask(sd, 0x2d, qvga ? 0x40 : 0x00, 0x40); */
/* i2c_w_mask(sd, 0x67, qvga ? 0xf0 : 0x90, 0xf0); */
/* i2c_w_mask(sd, 0x74, qvga ? 0x20 : 0x00, 0x20); */
+ i2c_w_mask(sd, 0x12, 0x04, 0x04); /* AWB: 1 */
break;
case SEN_OV7670:
/* set COM7_FMT_VGA or COM7_FMT_QVGA
@@ -2588,55 +3679,56 @@
i2c_w_mask(sd, OV7670_REG_COM7,
qvga ? OV7670_COM7_FMT_QVGA : OV7670_COM7_FMT_VGA,
OV7670_COM7_FMT_MASK);
+ i2c_w_mask(sd, 0x13, 0x00, 0x20); /* Select 16 bit data bus */
+ i2c_w_mask(sd, OV7670_REG_COM8, OV7670_COM8_AWB,
+ OV7670_COM8_AWB);
+ if (qvga) { /* QVGA from ov7670.c by
+ * Jonathan Corbet */
+ xstart = 164;
+ xend = 28;
+ ystart = 14;
+ yend = 494;
+ } else { /* VGA */
+ xstart = 158;
+ xend = 14;
+ ystart = 10;
+ yend = 490;
+ }
+ /* OV7670 hardware window registers are split across
+ * multiple locations */
+ i2c_w(sd, OV7670_REG_HSTART, xstart >> 3);
+ i2c_w(sd, OV7670_REG_HSTOP, xend >> 3);
+ v = i2c_r(sd, OV7670_REG_HREF);
+ v = (v & 0xc0) | ((xend & 0x7) << 3) | (xstart & 0x07);
+ msleep(10); /* need to sleep between read and write to
+ * same reg! */
+ i2c_w(sd, OV7670_REG_HREF, v);
+
+ i2c_w(sd, OV7670_REG_VSTART, ystart >> 2);
+ i2c_w(sd, OV7670_REG_VSTOP, yend >> 2);
+ v = i2c_r(sd, OV7670_REG_VREF);
+ v = (v & 0xc0) | ((yend & 0x3) << 2) | (ystart & 0x03);
+ msleep(10); /* need to sleep between read and write to
+ * same reg! */
+ i2c_w(sd, OV7670_REG_VREF, v);
break;
case SEN_OV6620:
+ i2c_w_mask(sd, 0x14, qvga ? 0x20 : 0x00, 0x20);
+ i2c_w_mask(sd, 0x13, 0x00, 0x20); /* Select 16 bit data bus */
+ i2c_w_mask(sd, 0x12, 0x04, 0x06); /* AWB: 1 Test pattern: 0 */
+ break;
case SEN_OV6630:
case SEN_OV66308AF:
i2c_w_mask(sd, 0x14, qvga ? 0x20 : 0x00, 0x20);
+ i2c_w_mask(sd, 0x12, 0x04, 0x06); /* AWB: 1 Test pattern: 0 */
break;
default:
return -EINVAL;
}
- /******** Palette-specific regs ********/
-
- /* The OV518 needs special treatment. Although both the OV518
- * and the OV6630 support a 16-bit video bus, only the 8 bit Y
- * bus is actually used. The UV bus is tied to ground.
- * Therefore, the OV6630 needs to be in 8-bit multiplexed
- * output mode */
-
- /* OV7640 is 8-bit only */
-
- if (sd->sensor != SEN_OV6630 && sd->sensor != SEN_OV66308AF &&
- sd->sensor != SEN_OV7640)
- i2c_w_mask(sd, 0x13, 0x00, 0x20);
-
/******** Clock programming ********/
i2c_w(sd, 0x11, sd->clockdiv);
- /******** Special Features ********/
-/* no evidence this is possible with OV7670, either */
- /* Test Pattern */
- if (sd->sensor != SEN_OV7640 && sd->sensor != SEN_OV7670)
- i2c_w_mask(sd, 0x12, 0x00, 0x02);
-
- /* Enable auto white balance */
- if (sd->sensor == SEN_OV7670)
- i2c_w_mask(sd, OV7670_REG_COM8, OV7670_COM8_AWB,
- OV7670_COM8_AWB);
- else
- i2c_w_mask(sd, 0x12, 0x04, 0x04);
-
- /* This will go away as soon as ov51x_mode_init_sensor_regs() */
- /* is fully tested. */
- /* 7620/6620/6630? don't have register 0x35, so play it safe */
- if (sd->sensor == SEN_OV7610 || sd->sensor == SEN_OV76BE) {
- if (!qvga)
- i2c_w(sd, 0x35, 0x9e);
- else
- i2c_w(sd, 0x35, 0x1e);
- }
return 0;
}
@@ -2659,8 +3751,12 @@
struct gspca_dev *gspca_dev;
int qvga, crop;
int hwsbase, hwebase, vwsbase, vwebase, hwscale, vwscale;
- int ret, hstart, hstop, vstop, vstart;
- __u8 v;
+ int ret;
+
+ /* mode setup is fully handled in mode_init_ov_sensor_regs for these */
+ if (sd->sensor == SEN_OV2610 || sd->sensor == SEN_OV3610 ||
+ sd->sensor == SEN_OV7670)
+ return mode_init_ov_sensor_regs(sd);
gspca_dev = &sd->gspca_dev;
qvga = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv & 1;
@@ -2708,11 +3804,6 @@
hwebase = 0x1a;
vwsbase = vwebase = 0x03;
break;
- case SEN_OV7670:
- /*handling of OV7670 hardware sensor start and stop values
- * is very odd, compared to the other OV sensors */
- vwsbase = vwebase = hwebase = hwsbase = 0x00;
- break;
default:
return -EINVAL;
}
@@ -2753,58 +3844,11 @@
if (ret < 0)
return ret;
- if (sd->sensor == SEN_OV8610) {
- i2c_w_mask(sd, 0x2d, 0x05, 0x40);
- /* old 0x95, new 0x05 from windrv 090403 */
- /* bits 5-7: reserved */
- i2c_w_mask(sd, 0x28, 0x20, 0x20);
- /* bit 5: progressive mode on */
- }
+ i2c_w(sd, 0x17, hwsbase);
+ i2c_w(sd, 0x18, hwebase + (sd->sensor_width >> hwscale));
+ i2c_w(sd, 0x19, vwsbase);
+ i2c_w(sd, 0x1a, vwebase + (sd->sensor_height >> vwscale));
- /* The below is wrong for OV7670s because their window registers
- * only store the high bits in 0x17 to 0x1a */
-
- /* SRH Use sd->max values instead of requested win values */
- /* SCS Since we're sticking with only the max hardware widths
- * for a given mode */
- /* I can hard code this for OV7670s */
- /* Yes, these numbers do look odd, but they're tested and work! */
- if (sd->sensor == SEN_OV7670) {
- if (qvga) { /* QVGA from ov7670.c by
- * Jonathan Corbet */
- hstart = 164;
- hstop = 28;
- vstart = 14;
- vstop = 494;
- } else { /* VGA */
- hstart = 158;
- hstop = 14;
- vstart = 10;
- vstop = 490;
- }
- /* OV7670 hardware window registers are split across
- * multiple locations */
- i2c_w(sd, OV7670_REG_HSTART, hstart >> 3);
- i2c_w(sd, OV7670_REG_HSTOP, hstop >> 3);
- v = i2c_r(sd, OV7670_REG_HREF);
- v = (v & 0xc0) | ((hstop & 0x7) << 3) | (hstart & 0x07);
- msleep(10); /* need to sleep between read and write to
- * same reg! */
- i2c_w(sd, OV7670_REG_HREF, v);
-
- i2c_w(sd, OV7670_REG_VSTART, vstart >> 2);
- i2c_w(sd, OV7670_REG_VSTOP, vstop >> 2);
- v = i2c_r(sd, OV7670_REG_VREF);
- v = (v & 0xc0) | ((vstop & 0x3) << 2) | (vstart & 0x03);
- msleep(10); /* need to sleep between read and write to
- * same reg! */
- i2c_w(sd, OV7670_REG_VREF, v);
- } else {
- i2c_w(sd, 0x17, hwsbase);
- i2c_w(sd, 0x18, hwebase + (sd->gspca_dev.width >> hwscale));
- i2c_w(sd, 0x19, vwsbase);
- i2c_w(sd, 0x1a, vwebase + (sd->gspca_dev.height >> vwscale));
- }
return 0;
}
@@ -2814,6 +3858,10 @@
struct sd *sd = (struct sd *) gspca_dev;
int ret = 0;
+ /* Default for most bridges, allow bridge_mode_init_regs to override */
+ sd->sensor_width = sd->gspca_dev.width;
+ sd->sensor_height = sd->gspca_dev.height;
+
switch (sd->bridge) {
case BRIDGE_OV511:
case BRIDGE_OV511PLUS:
@@ -2826,6 +3874,10 @@
case BRIDGE_OV519:
ret = ov519_mode_init_regs(sd);
break;
+ /* case BRIDGE_OVFX2: nothing to do */
+ case BRIDGE_W9968CF:
+ ret = w9968cf_mode_init_regs(sd);
+ break;
}
if (ret < 0)
goto out;
@@ -2859,10 +3911,17 @@
ov51x_led_control(sd, 0);
}
+static void sd_stop0(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ if (sd->bridge == BRIDGE_W9968CF)
+ w9968cf_stop0(sd);
+}
+
static void ov511_pkt_scan(struct gspca_dev *gspca_dev,
- struct gspca_frame *frame, /* target */
- __u8 *in, /* isoc packet */
- int len) /* iso packet length */
+ u8 *in, /* isoc packet */
+ int len) /* iso packet length */
{
struct sd *sd = (struct sd *) gspca_dev;
@@ -2893,11 +3952,11 @@
return;
}
/* Add 11 byte footer to frame, might be usefull */
- gspca_frame_add(gspca_dev, LAST_PACKET, frame, in, 11);
+ gspca_frame_add(gspca_dev, LAST_PACKET, in, 11);
return;
} else {
/* Frame start */
- gspca_frame_add(gspca_dev, FIRST_PACKET, frame, in, 0);
+ gspca_frame_add(gspca_dev, FIRST_PACKET, in, 0);
sd->packet_nr = 0;
}
}
@@ -2906,12 +3965,11 @@
len--;
/* intermediate packet */
- gspca_frame_add(gspca_dev, INTER_PACKET, frame, in, len);
+ gspca_frame_add(gspca_dev, INTER_PACKET, in, len);
}
static void ov518_pkt_scan(struct gspca_dev *gspca_dev,
- struct gspca_frame *frame, /* target */
- __u8 *data, /* isoc packet */
+ u8 *data, /* isoc packet */
int len) /* iso packet length */
{
struct sd *sd = (struct sd *) gspca_dev;
@@ -2919,8 +3977,8 @@
/* A false positive here is likely, until OVT gives me
* the definitive SOF/EOF format */
if ((!(data[0] | data[1] | data[2] | data[3] | data[5])) && data[6]) {
- frame = gspca_frame_add(gspca_dev, LAST_PACKET, frame, data, 0);
- gspca_frame_add(gspca_dev, FIRST_PACKET, frame, data, 0);
+ gspca_frame_add(gspca_dev, LAST_PACKET, NULL, 0);
+ gspca_frame_add(gspca_dev, FIRST_PACKET, NULL, 0);
sd->packet_nr = 0;
}
@@ -2944,12 +4002,11 @@
}
/* intermediate packet */
- gspca_frame_add(gspca_dev, INTER_PACKET, frame, data, len);
+ gspca_frame_add(gspca_dev, INTER_PACKET, data, len);
}
static void ov519_pkt_scan(struct gspca_dev *gspca_dev,
- struct gspca_frame *frame, /* target */
- __u8 *data, /* isoc packet */
+ u8 *data, /* isoc packet */
int len) /* iso packet length */
{
/* Header of ov519 is 16 bytes:
@@ -2972,7 +4029,7 @@
len -= HDRSZ;
#undef HDRSZ
if (data[0] == 0xff || data[1] == 0xd8)
- gspca_frame_add(gspca_dev, FIRST_PACKET, frame,
+ gspca_frame_add(gspca_dev, FIRST_PACKET,
data, len);
else
gspca_dev->last_packet_type = DISCARD_PACKET;
@@ -2980,20 +4037,31 @@
case 0x51: /* end of frame */
if (data[9] != 0)
gspca_dev->last_packet_type = DISCARD_PACKET;
- gspca_frame_add(gspca_dev, LAST_PACKET, frame,
- data, 0);
+ gspca_frame_add(gspca_dev, LAST_PACKET,
+ NULL, 0);
return;
}
}
/* intermediate packet */
- gspca_frame_add(gspca_dev, INTER_PACKET, frame,
- data, len);
+ gspca_frame_add(gspca_dev, INTER_PACKET, data, len);
+}
+
+static void ovfx2_pkt_scan(struct gspca_dev *gspca_dev,
+ u8 *data, /* isoc packet */
+ int len) /* iso packet length */
+{
+ /* A short read signals EOF */
+ if (len < OVFX2_BULK_SIZE) {
+ gspca_frame_add(gspca_dev, LAST_PACKET, data, len);
+ gspca_frame_add(gspca_dev, FIRST_PACKET, NULL, 0);
+ return;
+ }
+ gspca_frame_add(gspca_dev, INTER_PACKET, data, len);
}
static void sd_pkt_scan(struct gspca_dev *gspca_dev,
- struct gspca_frame *frame, /* target */
- __u8 *data, /* isoc packet */
+ u8 *data, /* isoc packet */
int len) /* iso packet length */
{
struct sd *sd = (struct sd *) gspca_dev;
@@ -3001,14 +4069,20 @@
switch (sd->bridge) {
case BRIDGE_OV511:
case BRIDGE_OV511PLUS:
- ov511_pkt_scan(gspca_dev, frame, data, len);
+ ov511_pkt_scan(gspca_dev, data, len);
break;
case BRIDGE_OV518:
case BRIDGE_OV518PLUS:
- ov518_pkt_scan(gspca_dev, frame, data, len);
+ ov518_pkt_scan(gspca_dev, data, len);
break;
case BRIDGE_OV519:
- ov519_pkt_scan(gspca_dev, frame, data, len);
+ ov519_pkt_scan(gspca_dev, data, len);
+ break;
+ case BRIDGE_OVFX2:
+ ovfx2_pkt_scan(gspca_dev, data, len);
+ break;
+ case BRIDGE_W9968CF:
+ w9968cf_pkt_scan(gspca_dev, data, len);
break;
}
}
@@ -3124,7 +4198,8 @@
static void setautobrightness(struct sd *sd)
{
- if (sd->sensor == SEN_OV7640 || sd->sensor == SEN_OV7670)
+ if (sd->sensor == SEN_OV7640 || sd->sensor == SEN_OV7670 ||
+ sd->sensor == SEN_OV2610 || sd->sensor == SEN_OV3610)
return;
i2c_w_mask(sd, 0x2d, sd->autobrightness ? 0x10 : 0x00, 0x10);
@@ -3132,6 +4207,9 @@
static void setfreq(struct sd *sd)
{
+ if (sd->sensor == SEN_OV2610 || sd->sensor == SEN_OV3610)
+ return;
+
if (sd->sensor == SEN_OV7670) {
switch (sd->freq) {
case 0: /* Banding filter disabled */
@@ -3301,8 +4379,12 @@
struct sd *sd = (struct sd *) gspca_dev;
sd->freq = val;
- if (gspca_dev->streaming)
+ if (gspca_dev->streaming) {
setfreq(sd);
+ /* Ugly but necessary */
+ if (sd->bridge == BRIDGE_W9968CF)
+ w9968cf_set_crop_window(sd);
+ }
return 0;
}
@@ -3343,6 +4425,45 @@
return -EINVAL;
}
+static int sd_get_jcomp(struct gspca_dev *gspca_dev,
+ struct v4l2_jpegcompression *jcomp)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ if (sd->bridge != BRIDGE_W9968CF)
+ return -EINVAL;
+
+ memset(jcomp, 0, sizeof *jcomp);
+ jcomp->quality = sd->quality;
+ jcomp->jpeg_markers = V4L2_JPEG_MARKER_DHT | V4L2_JPEG_MARKER_DQT |
+ V4L2_JPEG_MARKER_DRI;
+ return 0;
+}
+
+static int sd_set_jcomp(struct gspca_dev *gspca_dev,
+ struct v4l2_jpegcompression *jcomp)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ if (sd->bridge != BRIDGE_W9968CF)
+ return -EINVAL;
+
+ if (gspca_dev->streaming)
+ return -EBUSY;
+
+ if (jcomp->quality < QUALITY_MIN)
+ sd->quality = QUALITY_MIN;
+ else if (jcomp->quality > QUALITY_MAX)
+ sd->quality = QUALITY_MAX;
+ else
+ sd->quality = jcomp->quality;
+
+ /* Return resulting jcomp params to app */
+ sd_get_jcomp(gspca_dev, jcomp);
+
+ return 0;
+}
+
/* sub-driver description */
static const struct sd_desc sd_desc = {
.name = MODULE_NAME,
@@ -3352,18 +4473,23 @@
.init = sd_init,
.start = sd_start,
.stopN = sd_stopN,
+ .stop0 = sd_stop0,
.pkt_scan = sd_pkt_scan,
.querymenu = sd_querymenu,
+ .get_jcomp = sd_get_jcomp,
+ .set_jcomp = sd_set_jcomp,
};
/* -- module initialisation -- */
static const __devinitdata struct usb_device_id device_table[] = {
+ {USB_DEVICE(0x041e, 0x4003), .driver_info = BRIDGE_W9968CF },
{USB_DEVICE(0x041e, 0x4052), .driver_info = BRIDGE_OV519 },
{USB_DEVICE(0x041e, 0x405f), .driver_info = BRIDGE_OV519 },
{USB_DEVICE(0x041e, 0x4060), .driver_info = BRIDGE_OV519 },
{USB_DEVICE(0x041e, 0x4061), .driver_info = BRIDGE_OV519 },
{USB_DEVICE(0x041e, 0x4064),
.driver_info = BRIDGE_OV519 | BRIDGE_INVERT_LED },
+ {USB_DEVICE(0x041e, 0x4067), .driver_info = BRIDGE_OV519 },
{USB_DEVICE(0x041e, 0x4068),
.driver_info = BRIDGE_OV519 | BRIDGE_INVERT_LED },
{USB_DEVICE(0x045e, 0x028c), .driver_info = BRIDGE_OV519 },
@@ -3373,11 +4499,16 @@
{USB_DEVICE(0x05a9, 0x0518), .driver_info = BRIDGE_OV518 },
{USB_DEVICE(0x05a9, 0x0519), .driver_info = BRIDGE_OV519 },
{USB_DEVICE(0x05a9, 0x0530), .driver_info = BRIDGE_OV519 },
+ {USB_DEVICE(0x05a9, 0x2800), .driver_info = BRIDGE_OVFX2 },
{USB_DEVICE(0x05a9, 0x4519), .driver_info = BRIDGE_OV519 },
{USB_DEVICE(0x05a9, 0x8519), .driver_info = BRIDGE_OV519 },
{USB_DEVICE(0x05a9, 0xa511), .driver_info = BRIDGE_OV511PLUS },
{USB_DEVICE(0x05a9, 0xa518), .driver_info = BRIDGE_OV518PLUS },
{USB_DEVICE(0x0813, 0x0002), .driver_info = BRIDGE_OV511PLUS },
+ {USB_DEVICE(0x0b62, 0x0059), .driver_info = BRIDGE_OVFX2 },
+ {USB_DEVICE(0x0e96, 0xc001), .driver_info = BRIDGE_OVFX2 },
+ {USB_DEVICE(0x1046, 0x9967), .driver_info = BRIDGE_W9968CF },
+ {USB_DEVICE(0x8020, 0xEF04), .driver_info = BRIDGE_OVFX2 },
{}
};
diff --git a/drivers/media/video/gspca/ov534.c b/drivers/media/video/gspca/ov534.c
index 4b528b3..4dbb882 100644
--- a/drivers/media/video/gspca/ov534.c
+++ b/drivers/media/video/gspca/ov534.c
@@ -1,5 +1,6 @@
/*
* ov534 gspca driver
+ *
* Copyright (C) 2008 Antonio Ospite <ospite@studenti.unina.it>
* Copyright (C) 2008 Jim Paris <jim@jtan.com>
* Copyright (C) 2009 Jean-Francois Moine http://moinejf.free.fr
@@ -8,6 +9,10 @@
* USB protocol reverse engineered by Jim Paris <jim@jtan.com>
* https://jim.sh/svn/jim/devl/playstation/ps3/eye/test/
*
+ * PS3 Eye camera enhanced by Richard Kaswy http://kaswy.free.fr
+ * PS3 Eye camera, brightness, contrast, hue, AWB control added
+ * by Max Thrun <bear24rw@gmail.com>
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
@@ -51,16 +56,335 @@
u16 last_fid;
u8 frame_rate;
+ u8 brightness;
+ u8 contrast;
+ u8 gain;
+ u8 exposure;
+ u8 redblc;
+ u8 blueblc;
+ u8 hue;
+ u8 autogain;
+ u8 awb;
+ s8 sharpness;
+ u8 hflip;
+ u8 vflip;
+ u8 satur;
+ u8 lightfreq;
+
u8 sensor;
#define SENSOR_OV772X 0
#define SENSOR_OV965X 1
};
/* V4L2 controls supported by the driver */
-static struct ctrl sd_ctrls[] = {
+static int sd_setgain(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_getgain(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_setexposure(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_getexposure(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_setredblc(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_getredblc(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_setblueblc(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_getblueblc(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_getautogain(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_setsharpness(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_getsharpness(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_sethflip(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_gethflip(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_setvflip(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_getvflip(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_sethue(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_gethue(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_setawb(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_getawb(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_getbrightness(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_setcontrast(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_getcontrast(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_setsatur(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_getsatur(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_setfreq(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_getfreq(struct gspca_dev *gspca_dev, __s32 *val);
+
+static struct ctrl sd_ctrls_ov772x[] = {
+ { /* 0 */
+ {
+ .id = V4L2_CID_BRIGHTNESS,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Brightness",
+ .minimum = 0,
+ .maximum = 255,
+ .step = 1,
+#define BRIGHTNESS_77_DEF 20
+ .default_value = BRIGHTNESS_77_DEF,
+ },
+ .set = sd_setbrightness,
+ .get = sd_getbrightness,
+ },
+ { /* 1 */
+ {
+ .id = V4L2_CID_CONTRAST,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Contrast",
+ .minimum = 0,
+ .maximum = 255,
+ .step = 1,
+#define CONTRAST_77_DEF 37
+ .default_value = CONTRAST_77_DEF,
+ },
+ .set = sd_setcontrast,
+ .get = sd_getcontrast,
+ },
+ { /* 2 */
+ {
+ .id = V4L2_CID_GAIN,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Main Gain",
+ .minimum = 0,
+ .maximum = 63,
+ .step = 1,
+#define GAIN_DEF 20
+ .default_value = GAIN_DEF,
+ },
+ .set = sd_setgain,
+ .get = sd_getgain,
+ },
+ { /* 3 */
+ {
+ .id = V4L2_CID_EXPOSURE,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Exposure",
+ .minimum = 0,
+ .maximum = 255,
+ .step = 1,
+#define EXPO_77_DEF 120
+ .default_value = EXPO_77_DEF,
+ },
+ .set = sd_setexposure,
+ .get = sd_getexposure,
+ },
+ { /* 4 */
+ {
+ .id = V4L2_CID_RED_BALANCE,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Red Balance",
+ .minimum = 0,
+ .maximum = 255,
+ .step = 1,
+#define RED_BALANCE_DEF 128
+ .default_value = RED_BALANCE_DEF,
+ },
+ .set = sd_setredblc,
+ .get = sd_getredblc,
+ },
+ { /* 5 */
+ {
+ .id = V4L2_CID_BLUE_BALANCE,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Blue Balance",
+ .minimum = 0,
+ .maximum = 255,
+ .step = 1,
+#define BLUE_BALANCE_DEF 128
+ .default_value = BLUE_BALANCE_DEF,
+ },
+ .set = sd_setblueblc,
+ .get = sd_getblueblc,
+ },
+ { /* 6 */
+ {
+ .id = V4L2_CID_HUE,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Hue",
+ .minimum = 0,
+ .maximum = 255,
+ .step = 1,
+#define HUE_DEF 143
+ .default_value = HUE_DEF,
+ },
+ .set = sd_sethue,
+ .get = sd_gethue,
+ },
+ { /* 7 */
+ {
+ .id = V4L2_CID_AUTOGAIN,
+ .type = V4L2_CTRL_TYPE_BOOLEAN,
+ .name = "Autogain",
+ .minimum = 0,
+ .maximum = 1,
+ .step = 1,
+#define AUTOGAIN_77_DEF 0
+ .default_value = AUTOGAIN_77_DEF,
+ },
+ .set = sd_setautogain,
+ .get = sd_getautogain,
+ },
+#define AWB_77_IDX 8
+ { /* 8 */
+ {
+ .id = V4L2_CID_AUTO_WHITE_BALANCE,
+ .type = V4L2_CTRL_TYPE_BOOLEAN,
+ .name = "Auto White Balance",
+ .minimum = 0,
+ .maximum = 1,
+ .step = 1,
+#define AWB_DEF 0
+ .default_value = AWB_DEF,
+ },
+ .set = sd_setawb,
+ .get = sd_getawb,
+ },
+ { /* 9 */
+ {
+ .id = V4L2_CID_SHARPNESS,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Sharpness",
+ .minimum = 0,
+ .maximum = 63,
+ .step = 1,
+#define SHARPNESS_77_DEF 0
+ .default_value = SHARPNESS_77_DEF,
+ },
+ .set = sd_setsharpness,
+ .get = sd_getsharpness,
+ },
+ { /* 10 */
+ {
+ .id = V4L2_CID_HFLIP,
+ .type = V4L2_CTRL_TYPE_BOOLEAN,
+ .name = "HFlip",
+ .minimum = 0,
+ .maximum = 1,
+ .step = 1,
+#define HFLIP_DEF 0
+ .default_value = HFLIP_DEF,
+ },
+ .set = sd_sethflip,
+ .get = sd_gethflip,
+ },
+ { /* 11 */
+ {
+ .id = V4L2_CID_VFLIP,
+ .type = V4L2_CTRL_TYPE_BOOLEAN,
+ .name = "VFlip",
+ .minimum = 0,
+ .maximum = 1,
+ .step = 1,
+#define VFLIP_DEF 0
+ .default_value = VFLIP_DEF,
+ },
+ .set = sd_setvflip,
+ .get = sd_getvflip,
+ },
+};
+static struct ctrl sd_ctrls_ov965x[] = {
+ { /* 0 */
+ {
+ .id = V4L2_CID_BRIGHTNESS,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Brightness",
+ .minimum = 0,
+ .maximum = 15,
+ .step = 1,
+#define BRIGHTNESS_96_DEF 7
+ .default_value = BRIGHTNESS_96_DEF,
+ },
+ .set = sd_setbrightness,
+ .get = sd_getbrightness,
+ },
+ { /* 1 */
+ {
+ .id = V4L2_CID_CONTRAST,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Contrast",
+ .minimum = 0,
+ .maximum = 15,
+ .step = 1,
+#define CONTRAST_96_DEF 3
+ .default_value = CONTRAST_96_DEF,
+ },
+ .set = sd_setcontrast,
+ .get = sd_getcontrast,
+ },
+ { /* 2 */
+ {
+ .id = V4L2_CID_AUTOGAIN,
+ .type = V4L2_CTRL_TYPE_BOOLEAN,
+ .name = "Autogain",
+ .minimum = 0,
+ .maximum = 1,
+ .step = 1,
+#define AUTOGAIN_96_DEF 1
+ .default_value = AUTOGAIN_96_DEF,
+ },
+ .set = sd_setautogain,
+ .get = sd_getautogain,
+ },
+#define EXPO_96_IDX 3
+ { /* 3 */
+ {
+ .id = V4L2_CID_EXPOSURE,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Exposure",
+ .minimum = 0,
+ .maximum = 3,
+ .step = 1,
+#define EXPO_96_DEF 0
+ .default_value = EXPO_96_DEF,
+ },
+ .set = sd_setexposure,
+ .get = sd_getexposure,
+ },
+ { /* 4 */
+ {
+ .id = V4L2_CID_SHARPNESS,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Sharpness",
+ .minimum = -1, /* -1 = auto */
+ .maximum = 4,
+ .step = 1,
+#define SHARPNESS_96_DEF -1
+ .default_value = SHARPNESS_96_DEF,
+ },
+ .set = sd_setsharpness,
+ .get = sd_getsharpness,
+ },
+ { /* 5 */
+ {
+ .id = V4L2_CID_SATURATION,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Saturation",
+ .minimum = 0,
+ .maximum = 4,
+ .step = 1,
+#define SATUR_DEF 2
+ .default_value = SATUR_DEF,
+ },
+ .set = sd_setsatur,
+ .get = sd_getsatur,
+ },
+ {
+ {
+ .id = V4L2_CID_POWER_LINE_FREQUENCY,
+ .type = V4L2_CTRL_TYPE_MENU,
+ .name = "Light frequency filter",
+ .minimum = 0,
+ .maximum = 2, /* 0: 0, 1: 50Hz, 2:60Hz */
+ .step = 1,
+#define FREQ_DEF 0
+ .default_value = FREQ_DEF,
+ },
+ .set = sd_setfreq,
+ .get = sd_getfreq,
+ },
};
-static const struct v4l2_pix_format vga_yuyv_mode[] = {
+static const struct v4l2_pix_format ov772x_mode[] = {
+ {320, 240, V4L2_PIX_FMT_YUYV, V4L2_FIELD_NONE,
+ .bytesperline = 320 * 2,
+ .sizeimage = 320 * 240 * 2,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .priv = 1},
{640, 480, V4L2_PIX_FMT_YUYV, V4L2_FIELD_NONE,
.bytesperline = 640 * 2,
.sizeimage = 640 * 480 * 2,
@@ -68,20 +392,35 @@
.priv = 0},
};
-static const struct v4l2_pix_format vga_jpeg_mode[] = {
+static const struct v4l2_pix_format ov965x_mode[] = {
{320, 240, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
.bytesperline = 320,
.sizeimage = 320 * 240 * 3 / 8 + 590,
.colorspace = V4L2_COLORSPACE_JPEG,
- .priv = 1},
+ .priv = 4},
{640, 480, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
.bytesperline = 640,
.sizeimage = 640 * 480 * 3 / 8 + 590,
.colorspace = V4L2_COLORSPACE_JPEG,
+ .priv = 3},
+ {800, 600, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
+ .bytesperline = 800,
+ .sizeimage = 800 * 600 * 3 / 8 + 590,
+ .colorspace = V4L2_COLORSPACE_JPEG,
+ .priv = 2},
+ {1024, 768, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
+ .bytesperline = 1024,
+ .sizeimage = 1024 * 768 * 3 / 8 + 590,
+ .colorspace = V4L2_COLORSPACE_JPEG,
+ .priv = 1},
+ {1280, 1024, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
+ .bytesperline = 1280,
+ .sizeimage = 1280 * 1024 * 3 / 8 + 590,
+ .colorspace = V4L2_COLORSPACE_JPEG,
.priv = 0},
};
-static const u8 bridge_init_ov722x[][2] = {
+static const u8 bridge_init_ov772x[][2] = {
{ 0xc2, 0x0c },
{ 0x88, 0xf8 },
{ 0xc3, 0x69 },
@@ -122,6 +461,7 @@
{ 0x1d, 0x40 },
{ 0x1d, 0x02 }, /* payload size 0x0200 * 4 = 2048 bytes */
{ 0x1d, 0x00 }, /* payload size */
+
{ 0x1d, 0x02 }, /* frame size 0x025800 * 4 = 614400 */
{ 0x1d, 0x58 }, /* frame size */
{ 0x1d, 0x00 }, /* frame size */
@@ -138,10 +478,20 @@
{ 0xc1, 0x3c },
{ 0xc2, 0x0c },
};
-
-static const u8 sensor_init_ov722x[][2] = {
+static const u8 sensor_init_ov772x[][2] = {
{ 0x12, 0x80 },
{ 0x11, 0x01 },
+/*fixme: better have a delay?*/
+ { 0x11, 0x01 },
+ { 0x11, 0x01 },
+ { 0x11, 0x01 },
+ { 0x11, 0x01 },
+ { 0x11, 0x01 },
+ { 0x11, 0x01 },
+ { 0x11, 0x01 },
+ { 0x11, 0x01 },
+ { 0x11, 0x01 },
+ { 0x11, 0x01 },
{ 0x3d, 0x03 },
{ 0x17, 0x26 },
@@ -154,10 +504,10 @@
{ 0x65, 0x20 },
{ 0x11, 0x01 },
{ 0x42, 0x7f },
- { 0x63, 0xe0 },
+ { 0x63, 0xaa }, /* AWB - was e0 */
{ 0x64, 0xff },
{ 0x66, 0x00 },
- { 0x13, 0xf0 },
+ { 0x13, 0xf0 }, /* com8 */
{ 0x0d, 0x41 },
{ 0x0f, 0xc5 },
{ 0x14, 0x11 },
@@ -170,7 +520,7 @@
{ 0x2a, 0x00 },
{ 0x2b, 0x00 },
{ 0x6b, 0xaa },
- { 0x13, 0xff },
+ { 0x13, 0xff }, /* AWB */
{ 0x90, 0x05 },
{ 0x91, 0x01 },
@@ -218,9 +568,51 @@
{ 0x14, 0x41 },
{ 0x0e, 0xcd },
{ 0xac, 0xbf },
- { 0x8e, 0x00 },
+ { 0x8e, 0x00 }, /* De-noise threshold */
{ 0x0c, 0xd0 }
};
+static const u8 bridge_start_ov772x_vga[][2] = {
+ {0x1c, 0x00},
+ {0x1d, 0x40},
+ {0x1d, 0x02},
+ {0x1d, 0x00},
+ {0x1d, 0x02},
+ {0x1d, 0x58},
+ {0x1d, 0x00},
+ {0xc0, 0x50},
+ {0xc1, 0x3c},
+};
+static const u8 sensor_start_ov772x_vga[][2] = {
+ {0x12, 0x00},
+ {0x17, 0x26},
+ {0x18, 0xa0},
+ {0x19, 0x07},
+ {0x1a, 0xf0},
+ {0x29, 0xa0},
+ {0x2c, 0xf0},
+ {0x65, 0x20},
+};
+static const u8 bridge_start_ov772x_qvga[][2] = {
+ {0x1c, 0x00},
+ {0x1d, 0x40},
+ {0x1d, 0x02},
+ {0x1d, 0x00},
+ {0x1d, 0x01},
+ {0x1d, 0x4b},
+ {0x1d, 0x00},
+ {0xc0, 0x28},
+ {0xc1, 0x1e},
+};
+static const u8 sensor_start_ov772x_qvga[][2] = {
+ {0x12, 0x40},
+ {0x17, 0x3f},
+ {0x18, 0x50},
+ {0x19, 0x03},
+ {0x1a, 0x78},
+ {0x29, 0x50},
+ {0x2c, 0x78},
+ {0x65, 0x2f},
+};
static const u8 bridge_init_ov965x[][2] = {
{0x88, 0xf8},
@@ -403,7 +795,7 @@
{0xcb, 0xf0},
{0xcc, 0xd8},
{0xcd, 0xf1},
- {0x4f, 0x98},
+ {0x4f, 0x98}, /* matrix */
{0x50, 0x98},
{0x51, 0x00},
{0x52, 0x28},
@@ -412,6 +804,7 @@
{0x58, 0x1a},
{0xff, 0x41}, /* read 41, write ff 00 */
{0x41, 0x40}, /* com16 */
+
{0xc5, 0x03}, /* 60 Hz banding filter */
{0x6a, 0x02}, /* 50 Hz banding filter */
@@ -455,8 +848,8 @@
{0x52, 0x3c},
{0x53, 0x00},
{0x54, 0x00},
- {0x55, 0x00}, /* brightness */
- {0x57, 0x00}, /* contrast 2 */
+ {0x55, 0x00},
+ {0x57, 0x00},
{0x5c, 0x00},
{0x5a, 0xa0},
{0x5b, 0x78},
@@ -479,14 +872,16 @@
{0xa3, 0x3e},
{0x2d, 0x00},
{0xff, 0x42}, /* read 42, write ff 00 */
- {0x42, 0xc0},
+ {0x42, 0xc0}, /* com17 */
{0x2d, 0x00},
{0xff, 0x42}, /* read 42, write ff 00 */
- {0x42, 0xc1},
+ {0x42, 0xc1}, /* com17 */
+/* sharpness */
{0x3f, 0x01},
{0xff, 0x42}, /* read 42, write ff 00 */
- {0x42, 0xc1},
- {0x4f, 0x98},
+ {0x42, 0xc1}, /* com17 */
+/* saturation */
+ {0x4f, 0x98}, /* matrix */
{0x50, 0x98},
{0x51, 0x00},
{0x52, 0x28},
@@ -495,14 +890,17 @@
{0x58, 0x1a},
{0xff, 0x41}, /* read 41, write ff 00 */
{0x41, 0x40}, /* com16 */
+/* contrast */
{0x56, 0x40},
+/* brightness */
{0x55, 0x8f},
+/* expo */
{0x10, 0x25}, /* aech - exposure high bits */
{0xff, 0x13}, /* read 13, write ff 00 */
{0x13, 0xe7}, /* com8 - everything (AGC, AWB and AEC) */
};
-static const u8 sensor_start_ov965x[][2] = {
+static const u8 sensor_start_ov965x_1_vga[][2] = { /* same for qvga */
{0x12, 0x62}, /* com7 - 30fps VGA YUV */
{0x36, 0xfa}, /* aref3 */
{0x69, 0x0a}, /* hv */
@@ -523,10 +921,77 @@
{0x1a, 0x3d}, /* vstop */
{0x32, 0xff}, /* href */
{0xc0, 0xaa},
- {}
};
-static const u8 bridge_start_ov965x[][2] = {
+static const u8 sensor_start_ov965x_1_svga[][2] = {
+ {0x12, 0x02}, /* com7 - YUYV - VGA 15 full resolution */
+ {0x36, 0xf8}, /* aref3 */
+ {0x69, 0x02}, /* hv */
+ {0x8c, 0x0d}, /* com22 */
+ {0x3e, 0x0c}, /* com14 */
+ {0x41, 0x40}, /* com16 */
+ {0x72, 0x00},
+ {0x73, 0x01},
+ {0x74, 0x3a},
+ {0x75, 0x35},
+ {0x76, 0x01},
+ {0xc7, 0x80}, /* com24 */
+ {0x03, 0x1b}, /* vref */
+ {0x17, 0x1d}, /* hstart */
+ {0x18, 0xbd}, /* hstop */
+ {0x19, 0x01}, /* vstrt */
+ {0x1a, 0x81}, /* vstop */
+ {0x32, 0xff}, /* href */
+ {0xc0, 0xe2},
+};
+
+static const u8 sensor_start_ov965x_1_xga[][2] = {
+ {0x12, 0x02}, /* com7 */
+ {0x36, 0xf8}, /* aref3 */
+ {0x69, 0x02}, /* hv */
+ {0x8c, 0x89}, /* com22 */
+ {0x14, 0x28}, /* com9 */
+ {0x3e, 0x0c}, /* com14 */
+ {0x41, 0x40}, /* com16 */
+ {0x72, 0x00},
+ {0x73, 0x01},
+ {0x74, 0x3a},
+ {0x75, 0x35},
+ {0x76, 0x01},
+ {0xc7, 0x80}, /* com24 */
+ {0x03, 0x1b}, /* vref */
+ {0x17, 0x1d}, /* hstart */
+ {0x18, 0xbd}, /* hstop */
+ {0x19, 0x01}, /* vstrt */
+ {0x1a, 0x81}, /* vstop */
+ {0x32, 0xff}, /* href */
+ {0xc0, 0xe2},
+};
+
+static const u8 sensor_start_ov965x_1_sxga[][2] = {
+ {0x12, 0x02}, /* com7 */
+ {0x36, 0xf8}, /* aref3 */
+ {0x69, 0x02}, /* hv */
+ {0x8c, 0x89}, /* com22 */
+ {0x14, 0x28}, /* com9 */
+ {0x3e, 0x0c}, /* com14 */
+ {0x41, 0x40}, /* com16 */
+ {0x72, 0x00},
+ {0x73, 0x01},
+ {0x74, 0x3a},
+ {0x75, 0x35},
+ {0x76, 0x01},
+ {0xc7, 0x80}, /* com24 */
+ {0x03, 0x1b}, /* vref */
+ {0x17, 0x1d}, /* hstart */
+ {0x18, 0x02}, /* hstop */
+ {0x19, 0x01}, /* vstrt */
+ {0x1a, 0x81}, /* vstop */
+ {0x32, 0xff}, /* href */
+ {0xc0, 0xe2},
+};
+
+static const u8 bridge_start_ov965x_qvga[][2] = {
{0x94, 0xaa},
{0xf1, 0x60},
{0xe5, 0x04},
@@ -535,30 +1000,7 @@
{0x8c, 0x00},
{0x8d, 0x1c},
{0x34, 0x05},
- {}
-};
-static const u8 bridge_start_ov965x_vga[][2] = {
- {0xc2, 0x0c},
- {0xc3, 0xf9},
- {0xda, 0x01},
- {0x50, 0x00},
- {0x51, 0xa0},
- {0x52, 0x3c},
- {0x53, 0x00},
- {0x54, 0x00},
- {0x55, 0x00},
- {0x57, 0x00},
- {0x5c, 0x00},
- {0x5a, 0xa0},
- {0x5b, 0x78},
- {0x35, 0x02},
- {0xd9, 0x10},
- {0x94, 0x11},
- {}
-};
-
-static const u8 bridge_start_ov965x_cif[][2] = {
{0xc2, 0x4c},
{0xc3, 0xf9},
{0xda, 0x00},
@@ -575,27 +1017,107 @@
{0x35, 0x02},
{0xd9, 0x10},
{0x94, 0x11},
- {}
};
-static const u8 sensor_start_ov965x_vga[][2] = {
- {0x3b, 0xc4}, /* com11 - night mode 1/4 frame rate */
- {0x1e, 0x04}, /* mvfp */
- {0x13, 0xe0}, /* com8 */
- {0x00, 0x00},
- {0x13, 0xe7}, /* com8 - everything (AGC, AWB and AEC) */
- {0x11, 0x03}, /* clkrc */
- {0x6b, 0x5a}, /* dblv */
- {0x6a, 0x05}, /* 50 Hz banding filter */
- {0xc5, 0x07}, /* 60 Hz banding filter */
- {0xa2, 0x4b}, /* bd50 */
- {0xa3, 0x3e}, /* bd60 */
-
- {0x2d, 0x00}, /* advfl */
- {}
+static const u8 bridge_start_ov965x_vga[][2] = {
+ {0x94, 0xaa},
+ {0xf1, 0x60},
+ {0xe5, 0x04},
+ {0xc0, 0x50},
+ {0xc1, 0x3c},
+ {0x8c, 0x00},
+ {0x8d, 0x1c},
+ {0x34, 0x05},
+ {0xc2, 0x0c},
+ {0xc3, 0xf9},
+ {0xda, 0x01},
+ {0x50, 0x00},
+ {0x51, 0xa0},
+ {0x52, 0x3c},
+ {0x53, 0x00},
+ {0x54, 0x00},
+ {0x55, 0x00},
+ {0x57, 0x00},
+ {0x5c, 0x00},
+ {0x5a, 0xa0},
+ {0x5b, 0x78},
+ {0x35, 0x02},
+ {0xd9, 0x10},
+ {0x94, 0x11},
};
-static const u8 sensor_start_ov965x_cif[][2] = {
+static const u8 bridge_start_ov965x_svga[][2] = {
+ {0x94, 0xaa},
+ {0xf1, 0x60},
+ {0xe5, 0x04},
+ {0xc0, 0xa0},
+ {0xc1, 0x80},
+ {0x8c, 0x00},
+ {0x8d, 0x1c},
+ {0x34, 0x05},
+ {0xc2, 0x4c},
+ {0xc3, 0xf9},
+ {0x50, 0x00},
+ {0x51, 0x40},
+ {0x52, 0x00},
+ {0x53, 0x00},
+ {0x54, 0x00},
+ {0x55, 0x88},
+ {0x57, 0x00},
+ {0x5c, 0x00},
+ {0x5a, 0xc8},
+ {0x5b, 0x96},
+ {0x35, 0x02},
+ {0xd9, 0x10},
+ {0xda, 0x00},
+ {0x94, 0x11},
+};
+
+static const u8 bridge_start_ov965x_xga[][2] = {
+ {0x94, 0xaa},
+ {0xf1, 0x60},
+ {0xe5, 0x04},
+ {0xc0, 0xa0},
+ {0xc1, 0x80},
+ {0x8c, 0x00},
+ {0x8d, 0x1c},
+ {0x34, 0x05},
+ {0xc2, 0x4c},
+ {0xc3, 0xf9},
+ {0x50, 0x00},
+ {0x51, 0x40},
+ {0x52, 0x00},
+ {0x53, 0x00},
+ {0x54, 0x00},
+ {0x55, 0x88},
+ {0x57, 0x00},
+ {0x5c, 0x01},
+ {0x5a, 0x00},
+ {0x5b, 0xc0},
+ {0x35, 0x02},
+ {0xd9, 0x10},
+ {0xda, 0x01},
+ {0x94, 0x11},
+};
+
+static const u8 bridge_start_ov965x_sxga[][2] = {
+ {0x94, 0xaa},
+ {0xf1, 0x60},
+ {0xe5, 0x04},
+ {0xc0, 0xa0},
+ {0xc1, 0x80},
+ {0x8c, 0x00},
+ {0x8d, 0x1c},
+ {0x34, 0x05},
+ {0xc2, 0x0c},
+ {0xc3, 0xf9},
+ {0xda, 0x00},
+ {0x35, 0x02},
+ {0xd9, 0x10},
+ {0x94, 0x11},
+};
+
+static const u8 sensor_start_ov965x_2_qvga[][2] = {
{0x3b, 0xe4}, /* com11 - night mode 1/4 frame rate */
{0x1e, 0x04}, /* mvfp */
{0x13, 0xe0}, /* com8 */
@@ -611,15 +1133,51 @@
{0xff, 0x13}, /* read 13, write ff 00 */
{0x13, 0xe7},
{0x3a, 0x80}, /* tslb - yuyv */
- {}
};
-static const u8 sensor_start_ov965x_2[][2] = {
- {0xff, 0x42}, /* read 42, write ff 00 */
- {0x42, 0xc1}, /* com17 - 50 Hz filter */
- {}
+static const u8 sensor_start_ov965x_2_vga[][2] = {
+ {0x3b, 0xc4}, /* com11 - night mode 1/4 frame rate */
+ {0x1e, 0x04}, /* mvfp */
+ {0x13, 0xe0}, /* com8 */
+ {0x00, 0x00},
+ {0x13, 0xe7}, /* com8 - everything (AGC, AWB and AEC) */
+ {0x11, 0x03}, /* clkrc */
+ {0x6b, 0x5a}, /* dblv */
+ {0x6a, 0x05}, /* 50 Hz banding filter */
+ {0xc5, 0x07}, /* 60 Hz banding filter */
+ {0xa2, 0x4b}, /* bd50 */
+ {0xa3, 0x3e}, /* bd60 */
+
+ {0x2d, 0x00}, /* advfl */
};
+static const u8 sensor_start_ov965x_2_svga[][2] = { /* same for xga */
+ {0x3b, 0xc4}, /* com11 - night mode 1/4 frame rate */
+ {0x1e, 0x04}, /* mvfp */
+ {0x13, 0xe0}, /* com8 */
+ {0x00, 0x00},
+ {0x13, 0xe7}, /* com8 - everything (AGC, AWB and AEC) */
+ {0x11, 0x01}, /* clkrc */
+ {0x6b, 0x5a}, /* dblv */
+ {0x6a, 0x0c}, /* 50 Hz banding filter */
+ {0xc5, 0x0f}, /* 60 Hz banding filter */
+ {0xa2, 0x4e}, /* bd50 */
+ {0xa3, 0x41}, /* bd60 */
+};
+
+static const u8 sensor_start_ov965x_2_sxga[][2] = {
+ {0x13, 0xe0}, /* com8 */
+ {0x00, 0x00},
+ {0x13, 0xe7}, /* com8 - everything (AGC, AWB and AEC) */
+ {0x3b, 0xc4}, /* com11 - night mode 1/4 frame rate */
+ {0x1e, 0x04}, /* mvfp */
+ {0x11, 0x01}, /* clkrc */
+ {0x6b, 0x5a}, /* dblv */
+ {0x6a, 0x0c}, /* 50 Hz banding filter */
+ {0xc5, 0x0f}, /* 60 Hz banding filter */
+ {0xa2, 0x4e}, /* bd50 */
+ {0xa3, 0x41}, /* bd60 */
+};
static void ov534_reg_write(struct gspca_dev *gspca_dev, u16 reg, u8 val)
{
@@ -753,39 +1311,310 @@
}
}
-/* set framerate */
-static void ov534_set_frame_rate(struct gspca_dev *gspca_dev)
+/* ov772x specific controls */
+static void set_frame_rate(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
- int fr = sd->frame_rate;
+ int i;
+ struct rate_s {
+ u8 fps;
+ u8 r11;
+ u8 r0d;
+ u8 re5;
+ };
+ const struct rate_s *r;
+ static const struct rate_s rate_0[] = { /* 640x480 */
+ {60, 0x01, 0xc1, 0x04},
+ {50, 0x01, 0x41, 0x02},
+ {40, 0x02, 0xc1, 0x04},
+ {30, 0x04, 0x81, 0x02},
+ {15, 0x03, 0x41, 0x04},
+ };
+ static const struct rate_s rate_1[] = { /* 320x240 */
+ {125, 0x02, 0x81, 0x02},
+ {100, 0x02, 0xc1, 0x04},
+ {75, 0x03, 0xc1, 0x04},
+ {60, 0x04, 0xc1, 0x04},
+ {50, 0x02, 0x41, 0x04},
+ {40, 0x03, 0x41, 0x04},
+ {30, 0x04, 0x41, 0x04},
+ };
- switch (fr) {
- case 50:
- sccb_reg_write(gspca_dev, 0x11, 0x01);
- sccb_reg_write(gspca_dev, 0x0d, 0x41);
- ov534_reg_write(gspca_dev, 0xe5, 0x02);
- break;
- case 40:
- sccb_reg_write(gspca_dev, 0x11, 0x02);
- sccb_reg_write(gspca_dev, 0x0d, 0xc1);
- ov534_reg_write(gspca_dev, 0xe5, 0x04);
- break;
-/* case 30: */
- default:
- fr = 30;
- sccb_reg_write(gspca_dev, 0x11, 0x04);
- sccb_reg_write(gspca_dev, 0x0d, 0x81);
- ov534_reg_write(gspca_dev, 0xe5, 0x02);
- break;
- case 15:
- sccb_reg_write(gspca_dev, 0x11, 0x03);
- sccb_reg_write(gspca_dev, 0x0d, 0x41);
- ov534_reg_write(gspca_dev, 0xe5, 0x04);
- break;
+ if (gspca_dev->cam.cam_mode[gspca_dev->curr_mode].priv == 0) {
+ r = rate_0;
+ i = ARRAY_SIZE(rate_0);
+ } else {
+ r = rate_1;
+ i = ARRAY_SIZE(rate_1);
+ }
+ while (--i > 0) {
+ if (sd->frame_rate >= r->fps)
+ break;
+ r++;
}
- sd->frame_rate = fr;
- PDEBUG(D_PROBE, "frame_rate: %d", fr);
+ sccb_reg_write(gspca_dev, 0x11, r->r11);
+ sccb_reg_write(gspca_dev, 0x0d, r->r0d);
+ ov534_reg_write(gspca_dev, 0xe5, r->re5);
+
+ PDEBUG(D_PROBE, "frame_rate: %d", r->fps);
+}
+
+static void setbrightness_77(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sccb_reg_write(gspca_dev, 0x9B, sd->brightness);
+}
+
+static void setcontrast_77(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sccb_reg_write(gspca_dev, 0x9C, sd->contrast);
+}
+
+static void setgain(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ u8 val;
+
+ val = sd->gain;
+ switch (val & 0x30) {
+ case 0x00:
+ val &= 0x0f;
+ break;
+ case 0x10:
+ val &= 0x0f;
+ val |= 0x30;
+ break;
+ case 0x20:
+ val &= 0x0f;
+ val |= 0x70;
+ break;
+ default:
+/* case 0x30: */
+ val &= 0x0f;
+ val |= 0xf0;
+ break;
+ }
+ sccb_reg_write(gspca_dev, 0x00, val);
+}
+
+static void setexposure_77(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ u8 val;
+
+ val = sd->exposure;
+ sccb_reg_write(gspca_dev, 0x08, val >> 7);
+ sccb_reg_write(gspca_dev, 0x10, val << 1);
+}
+
+static void setredblc(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sccb_reg_write(gspca_dev, 0x43, sd->redblc);
+}
+
+static void setblueblc(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sccb_reg_write(gspca_dev, 0x42, sd->blueblc);
+}
+
+static void sethue(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sccb_reg_write(gspca_dev, 0x01, sd->hue);
+}
+
+static void setautogain_77(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ if (sd->autogain) {
+ sccb_reg_write(gspca_dev, 0x13, 0xf7); /* AGC,AEC,AWB ON */
+ sccb_reg_write(gspca_dev, 0x64,
+ sccb_reg_read(gspca_dev, 0x64) | 0x03);
+ } else {
+ sccb_reg_write(gspca_dev, 0x13, 0xf0); /* AGC,AEC,AWB OFF */
+ sccb_reg_write(gspca_dev, 0x64,
+ sccb_reg_read(gspca_dev, 0x64) & 0xfc);
+ }
+}
+
+static void setawb(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ if (sd->awb)
+ sccb_reg_write(gspca_dev, 0x63, 0xe0); /* AWB on */
+ else
+ sccb_reg_write(gspca_dev, 0x63, 0xaa); /* AWB off */
+}
+
+static void setsharpness_77(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ u8 val;
+
+ val = sd->sharpness;
+ sccb_reg_write(gspca_dev, 0x91, val); /* vga noise */
+ sccb_reg_write(gspca_dev, 0x8e, val); /* qvga noise */
+}
+
+static void sethflip(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ if (sd->hflip == 0)
+ sccb_reg_write(gspca_dev, 0x0c,
+ sccb_reg_read(gspca_dev, 0x0c) | 0x40);
+ else
+ sccb_reg_write(gspca_dev, 0x0c,
+ sccb_reg_read(gspca_dev, 0x0c) & 0xbf);
+}
+
+static void setvflip(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ if (sd->vflip == 0)
+ sccb_reg_write(gspca_dev, 0x0c,
+ sccb_reg_read(gspca_dev, 0x0c) | 0x80);
+ else
+ sccb_reg_write(gspca_dev, 0x0c,
+ sccb_reg_read(gspca_dev, 0x0c) & 0x7f);
+}
+
+/* ov965x specific controls */
+static void setbrightness_96(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ u8 val;
+
+ val = sd->brightness;
+ if (val < 8)
+ val = 15 - val; /* f .. 8 */
+ else
+ val = val - 8; /* 0 .. 7 */
+ sccb_reg_write(gspca_dev, 0x55, /* brtn - brightness adjustment */
+ 0x0f | (val << 4));
+}
+
+static void setcontrast_96(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sccb_reg_write(gspca_dev, 0x56, /* cnst1 - contrast 1 ctrl coeff */
+ sd->contrast << 4);
+}
+
+static void setexposure_96(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ u8 val;
+ static const u8 expo[4] = {0x00, 0x25, 0x38, 0x5e};
+
+ sccb_reg_write(gspca_dev, 0x10, /* aec[9:2] */
+ expo[sd->exposure]);
+ val = sccb_reg_read(gspca_dev, 0x13); /* com8 */
+ sccb_reg_write(gspca_dev, 0xff, 0x00);
+ sccb_reg_write(gspca_dev, 0x13, val);
+ val = sccb_reg_read(gspca_dev, 0xa1); /* aech */
+ sccb_reg_write(gspca_dev, 0xff, 0x00);
+ sccb_reg_write(gspca_dev, 0xa1, val & 0xe0); /* aec[15:10] = 0 */
+}
+
+static void setsharpness_96(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ u8 val;
+
+ val = sd->sharpness;
+ if (val < 0) { /* auto */
+ val = sccb_reg_read(gspca_dev, 0x42); /* com17 */
+ sccb_reg_write(gspca_dev, 0xff, 0x00);
+ sccb_reg_write(gspca_dev, 0x42, val | 0x40);
+ /* Edge enhancement strength auto adjust */
+ return;
+ }
+ if (val != 0)
+ val = 1 << (val - 1);
+ sccb_reg_write(gspca_dev, 0x3f, /* edge - edge enhance. factor */
+ val);
+ val = sccb_reg_read(gspca_dev, 0x42); /* com17 */
+ sccb_reg_write(gspca_dev, 0xff, 0x00);
+ sccb_reg_write(gspca_dev, 0x42, val & 0xbf);
+}
+
+static void setautogain_96(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ u8 val;
+
+/*fixme: should adjust agc/awb/aec by different controls */
+ val = sd->autogain;
+ val = sccb_reg_read(gspca_dev, 0x13); /* com8 */
+ sccb_reg_write(gspca_dev, 0xff, 0x00);
+ if (sd->autogain)
+ val |= 0x05; /* agc & aec */
+ else
+ val &= 0xfa;
+ sccb_reg_write(gspca_dev, 0x13, val);
+}
+
+static void setsatur(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ u8 val1, val2, val3;
+ static const u8 matrix[5][2] = {
+ {0x14, 0x38},
+ {0x1e, 0x54},
+ {0x28, 0x70},
+ {0x32, 0x8c},
+ {0x48, 0x90}
+ };
+
+ val1 = matrix[sd->satur][0];
+ val2 = matrix[sd->satur][1];
+ val3 = val1 + val2;
+ sccb_reg_write(gspca_dev, 0x4f, val3); /* matrix coeff */
+ sccb_reg_write(gspca_dev, 0x50, val3);
+ sccb_reg_write(gspca_dev, 0x51, 0x00);
+ sccb_reg_write(gspca_dev, 0x52, val1);
+ sccb_reg_write(gspca_dev, 0x53, val2);
+ sccb_reg_write(gspca_dev, 0x54, val3);
+ sccb_reg_write(gspca_dev, 0x58, 0x1a); /* mtxs - coeff signs */
+ val1 = sccb_reg_read(gspca_dev, 0x41); /* com16 */
+ sccb_reg_write(gspca_dev, 0xff, 0x00);
+ sccb_reg_write(gspca_dev, 0x41, val1);
+}
+
+static void setfreq(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ u8 val;
+
+ val = sccb_reg_read(gspca_dev, 0x13); /* com8 */
+ sccb_reg_write(gspca_dev, 0xff, 0x00);
+ if (sd->lightfreq == 0) {
+ sccb_reg_write(gspca_dev, 0x13, val & 0xdf);
+ return;
+ }
+ sccb_reg_write(gspca_dev, 0x13, val | 0x20);
+
+ val = sccb_reg_read(gspca_dev, 0x42); /* com17 */
+ sccb_reg_write(gspca_dev, 0xff, 0x00);
+ if (sd->lightfreq == 1)
+ val |= 0x01;
+ else
+ val &= 0xfe;
+ sccb_reg_write(gspca_dev, 0x42, val);
}
/* this function is called at probe time */
@@ -800,17 +1629,60 @@
cam = &gspca_dev->cam;
if (sd->sensor == SENSOR_OV772X) {
- cam->cam_mode = vga_yuyv_mode;
- cam->nmodes = ARRAY_SIZE(vga_yuyv_mode);
+ cam->cam_mode = ov772x_mode;
+ cam->nmodes = ARRAY_SIZE(ov772x_mode);
cam->bulk = 1;
cam->bulk_size = 16384;
cam->bulk_nurbs = 2;
} else { /* ov965x */
- cam->cam_mode = vga_jpeg_mode;
- cam->nmodes = ARRAY_SIZE(vga_jpeg_mode);
+ cam->cam_mode = ov965x_mode;
+ cam->nmodes = ARRAY_SIZE(ov965x_mode);
}
+ sd->frame_rate = 30;
+
+ if (sd->sensor == SENSOR_OV772X) {
+ sd->brightness = BRIGHTNESS_77_DEF;
+ sd->contrast = CONTRAST_77_DEF;
+ sd->gain = GAIN_DEF;
+ sd->exposure = EXPO_77_DEF;
+ sd->redblc = RED_BALANCE_DEF;
+ sd->blueblc = BLUE_BALANCE_DEF;
+ sd->hue = HUE_DEF;
+#if AUTOGAIN_77_DEF != 0
+ sd->autogain = AUTOGAIN_77_DEF;
+#else
+ gspca_dev->ctrl_inac |= (1 << AWB_77_IDX);
+#endif
+#if AWB_DEF != 0
+ sd->awb = AWB_DEF
+#endif
+#if SHARPNESS_77_DEF != 0
+ sd->sharpness = SHARPNESS_77_DEF;
+#endif
+#if HFLIP_DEF != 0
+ sd->hflip = HFLIP_DEF;
+#endif
+#if VFLIP_DEF != 0
+ sd->vflip = VFLIP_DEF;
+#endif
+ } else {
+ sd->brightness = BRIGHTNESS_96_DEF;
+ sd->contrast = CONTRAST_96_DEF;
+#if AUTOGAIN_96_DEF != 0
+ sd->autogain = AUTOGAIN_96_DEF;
+ gspca_dev->ctrl_inac |= (1 << EXPO_96_IDX);
+#endif
+#if EXPO_96_DEF != 0
+ sd->exposure = EXPO_96_DEF;
+#endif
+#if SHARPNESS_96_DEF != 0
+ sd->sharpness = SHARPNESS_96_DEF;
+#endif
+ sd->satur = SATUR_DEF;
+ sd->lightfreq = FREQ_DEF;
+ }
return 0;
}
@@ -847,14 +1719,14 @@
/* initialize */
switch (sd->sensor) {
case SENSOR_OV772X:
- reg_w_array(gspca_dev, bridge_init_ov722x,
- ARRAY_SIZE(bridge_init_ov722x));
+ reg_w_array(gspca_dev, bridge_init_ov772x,
+ ARRAY_SIZE(bridge_init_ov772x));
ov534_set_led(gspca_dev, 1);
- sccb_w_array(gspca_dev, sensor_init_ov722x,
- ARRAY_SIZE(sensor_init_ov722x));
+ sccb_w_array(gspca_dev, sensor_init_ov772x,
+ ARRAY_SIZE(sensor_init_ov772x));
ov534_reg_write(gspca_dev, 0xe0, 0x09);
ov534_set_led(gspca_dev, 0);
- ov534_set_frame_rate(gspca_dev);
+ set_frame_rate(gspca_dev);
break;
default:
/* case SENSOR_OV965X: */
@@ -875,60 +1747,115 @@
return 0;
}
-static int sd_start(struct gspca_dev *gspca_dev)
+static int sd_start_ov772x(struct gspca_dev *gspca_dev)
{
- struct sd *sd = (struct sd *) gspca_dev;
int mode;
- switch (sd->sensor) {
- case SENSOR_OV772X:
- ov534_set_led(gspca_dev, 1);
- ov534_reg_write(gspca_dev, 0xe0, 0x00);
- break;
- default:
-/* case SENSOR_OV965X: */
-
- sccb_w_array(gspca_dev, sensor_start_ov965x,
- ARRAY_SIZE(sensor_start_ov965x));
- reg_w_array(gspca_dev, bridge_start_ov965x,
- ARRAY_SIZE(bridge_start_ov965x));
- mode = gspca_dev->cam.cam_mode[gspca_dev->curr_mode].priv;
- if (mode != 0) { /* 320x240 */
- reg_w_array(gspca_dev, bridge_start_ov965x_cif,
- ARRAY_SIZE(bridge_start_ov965x_cif));
- sccb_w_array(gspca_dev, sensor_start_ov965x_cif,
- ARRAY_SIZE(sensor_start_ov965x_cif));
- } else { /* 640x480 */
- reg_w_array(gspca_dev, bridge_start_ov965x_vga,
- ARRAY_SIZE(bridge_start_ov965x_vga));
- sccb_w_array(gspca_dev, sensor_start_ov965x_vga,
- ARRAY_SIZE(sensor_start_ov965x_vga));
- }
- sccb_w_array(gspca_dev, sensor_start_ov965x_2,
- ARRAY_SIZE(sensor_start_ov965x_2));
- ov534_reg_write(gspca_dev, 0xe0, 0x00);
- ov534_reg_write(gspca_dev, 0xe0, 0x00);
- ov534_set_led(gspca_dev, 1);
+ mode = gspca_dev->cam.cam_mode[gspca_dev->curr_mode].priv;
+ if (mode != 0) { /* 320x240 */
+ reg_w_array(gspca_dev, bridge_start_ov772x_qvga,
+ ARRAY_SIZE(bridge_start_ov772x_qvga));
+ sccb_w_array(gspca_dev, sensor_start_ov772x_qvga,
+ ARRAY_SIZE(sensor_start_ov772x_qvga));
+ } else { /* 640x480 */
+ reg_w_array(gspca_dev, bridge_start_ov772x_vga,
+ ARRAY_SIZE(bridge_start_ov772x_vga));
+ sccb_w_array(gspca_dev, sensor_start_ov772x_vga,
+ ARRAY_SIZE(sensor_start_ov772x_vga));
}
+ set_frame_rate(gspca_dev);
+
+ setautogain_77(gspca_dev);
+ setawb(gspca_dev);
+ setgain(gspca_dev);
+ setredblc(gspca_dev);
+ setblueblc(gspca_dev);
+ sethue(gspca_dev);
+ setexposure_77(gspca_dev);
+ setbrightness_77(gspca_dev);
+ setcontrast_77(gspca_dev);
+ setsharpness_77(gspca_dev);
+ setvflip(gspca_dev);
+ sethflip(gspca_dev);
+
+ ov534_set_led(gspca_dev, 1);
+ ov534_reg_write(gspca_dev, 0xe0, 0x00);
return 0;
}
-static void sd_stopN(struct gspca_dev *gspca_dev)
+static int sd_start_ov965x(struct gspca_dev *gspca_dev)
{
- struct sd *sd = (struct sd *) gspca_dev;
+ int mode;
- switch (sd->sensor) {
- case SENSOR_OV772X:
- ov534_reg_write(gspca_dev, 0xe0, 0x09);
- ov534_set_led(gspca_dev, 0);
- break;
+ mode = gspca_dev->cam.cam_mode[gspca_dev->curr_mode].priv;
+ switch (mode) {
default:
-/* case SENSOR_OV965X: */
- ov534_reg_write(gspca_dev, 0xe0, 0x01);
- ov534_set_led(gspca_dev, 0);
- ov534_reg_write(gspca_dev, 0xe0, 0x00);
+/* case 4: * 320x240 */
+ sccb_w_array(gspca_dev, sensor_start_ov965x_1_vga,
+ ARRAY_SIZE(sensor_start_ov965x_1_vga));
+ reg_w_array(gspca_dev, bridge_start_ov965x_qvga,
+ ARRAY_SIZE(bridge_start_ov965x_qvga));
+ sccb_w_array(gspca_dev, sensor_start_ov965x_2_qvga,
+ ARRAY_SIZE(sensor_start_ov965x_2_qvga));
+ break;
+ case 3: /* 640x480 */
+ sccb_w_array(gspca_dev, sensor_start_ov965x_1_vga,
+ ARRAY_SIZE(sensor_start_ov965x_1_vga));
+ reg_w_array(gspca_dev, bridge_start_ov965x_vga,
+ ARRAY_SIZE(bridge_start_ov965x_vga));
+ sccb_w_array(gspca_dev, sensor_start_ov965x_2_vga,
+ ARRAY_SIZE(sensor_start_ov965x_2_vga));
+ break;
+ case 2: /* 800x600 */
+ sccb_w_array(gspca_dev, sensor_start_ov965x_1_svga,
+ ARRAY_SIZE(sensor_start_ov965x_1_svga));
+ reg_w_array(gspca_dev, bridge_start_ov965x_svga,
+ ARRAY_SIZE(bridge_start_ov965x_svga));
+ sccb_w_array(gspca_dev, sensor_start_ov965x_2_svga,
+ ARRAY_SIZE(sensor_start_ov965x_2_svga));
+ break;
+ case 1: /* 1024x768 */
+ sccb_w_array(gspca_dev, sensor_start_ov965x_1_xga,
+ ARRAY_SIZE(sensor_start_ov965x_1_xga));
+ reg_w_array(gspca_dev, bridge_start_ov965x_xga,
+ ARRAY_SIZE(bridge_start_ov965x_xga));
+ sccb_w_array(gspca_dev, sensor_start_ov965x_2_svga,
+ ARRAY_SIZE(sensor_start_ov965x_2_svga));
+ break;
+ case 0: /* 1280x1024 */
+ sccb_w_array(gspca_dev, sensor_start_ov965x_1_sxga,
+ ARRAY_SIZE(sensor_start_ov965x_1_sxga));
+ reg_w_array(gspca_dev, bridge_start_ov965x_sxga,
+ ARRAY_SIZE(bridge_start_ov965x_sxga));
+ sccb_w_array(gspca_dev, sensor_start_ov965x_2_sxga,
+ ARRAY_SIZE(sensor_start_ov965x_2_sxga));
break;
}
+ setfreq(gspca_dev);
+ setautogain_96(gspca_dev);
+ setbrightness_96(gspca_dev);
+ setcontrast_96(gspca_dev);
+ setexposure_96(gspca_dev);
+ setsharpness_96(gspca_dev);
+ setsatur(gspca_dev);
+
+ ov534_reg_write(gspca_dev, 0xe0, 0x00);
+ ov534_reg_write(gspca_dev, 0xe0, 0x00);
+ ov534_set_led(gspca_dev, 1);
+ return 0;
+}
+
+static void sd_stopN_ov772x(struct gspca_dev *gspca_dev)
+{
+ ov534_reg_write(gspca_dev, 0xe0, 0x09);
+ ov534_set_led(gspca_dev, 0);
+}
+
+static void sd_stopN_ov965x(struct gspca_dev *gspca_dev)
+{
+ ov534_reg_write(gspca_dev, 0xe0, 0x01);
+ ov534_set_led(gspca_dev, 0);
+ ov534_reg_write(gspca_dev, 0xe0, 0x00);
}
/* Values for bmHeaderInfo (Video and Still Image Payload Headers, 2.4.3.3) */
@@ -941,8 +1868,8 @@
#define UVC_STREAM_EOF (1 << 1)
#define UVC_STREAM_FID (1 << 0)
-static void sd_pkt_scan(struct gspca_dev *gspca_dev, struct gspca_frame *frame,
- __u8 *data, int len)
+static void sd_pkt_scan(struct gspca_dev *gspca_dev,
+ u8 *data, int len)
{
struct sd *sd = (struct sd *) gspca_dev;
__u32 this_pts;
@@ -983,32 +1910,30 @@
/* If PTS or FID has changed, start a new frame. */
if (this_pts != sd->last_pts || this_fid != sd->last_fid) {
if (gspca_dev->last_packet_type == INTER_PACKET)
- frame = gspca_frame_add(gspca_dev,
- LAST_PACKET, frame,
- NULL, 0);
+ gspca_frame_add(gspca_dev, LAST_PACKET,
+ NULL, 0);
sd->last_pts = this_pts;
sd->last_fid = this_fid;
- gspca_frame_add(gspca_dev, FIRST_PACKET, frame,
+ gspca_frame_add(gspca_dev, FIRST_PACKET,
data + 12, len - 12);
/* If this packet is marked as EOF, end the frame */
} else if (data[1] & UVC_STREAM_EOF) {
sd->last_pts = 0;
- frame = gspca_frame_add(gspca_dev, LAST_PACKET, frame,
- data + 12, len - 12);
+ gspca_frame_add(gspca_dev, LAST_PACKET,
+ data + 12, len - 12);
} else {
/* Add the data from this payload */
- gspca_frame_add(gspca_dev, INTER_PACKET, frame,
- data + 12, len - 12);
+ gspca_frame_add(gspca_dev, INTER_PACKET,
+ data + 12, len - 12);
}
-
/* Done this payload */
goto scan_next;
discard:
/* Discard data until a new frame starts. */
- gspca_frame_add(gspca_dev, DISCARD_PACKET, frame, NULL, 0);
+ gspca_dev->last_packet_type = DISCARD_PACKET;
scan_next:
remaining_len -= len;
@@ -1016,6 +1941,291 @@
} while (remaining_len > 0);
}
+/* controls */
+static int sd_setgain(struct gspca_dev *gspca_dev, __s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sd->gain = val;
+ if (gspca_dev->streaming)
+ setgain(gspca_dev);
+ return 0;
+}
+
+static int sd_getgain(struct gspca_dev *gspca_dev, __s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ *val = sd->gain;
+ return 0;
+}
+
+static int sd_setexposure(struct gspca_dev *gspca_dev, __s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sd->exposure = val;
+ if (gspca_dev->streaming) {
+ if (sd->sensor == SENSOR_OV772X)
+ setexposure_77(gspca_dev);
+ else
+ setexposure_96(gspca_dev);
+ }
+ return 0;
+}
+
+static int sd_getexposure(struct gspca_dev *gspca_dev, __s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ *val = sd->exposure;
+ return 0;
+}
+
+static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sd->brightness = val;
+ if (gspca_dev->streaming) {
+ if (sd->sensor == SENSOR_OV772X)
+ setbrightness_77(gspca_dev);
+ else
+ setbrightness_96(gspca_dev);
+ }
+ return 0;
+}
+
+static int sd_getbrightness(struct gspca_dev *gspca_dev, __s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ *val = sd->brightness;
+ return 0;
+}
+
+static int sd_setcontrast(struct gspca_dev *gspca_dev, __s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sd->contrast = val;
+ if (gspca_dev->streaming) {
+ if (sd->sensor == SENSOR_OV772X)
+ setcontrast_77(gspca_dev);
+ else
+ setcontrast_96(gspca_dev);
+ }
+ return 0;
+}
+
+static int sd_getcontrast(struct gspca_dev *gspca_dev, __s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ *val = sd->contrast;
+ return 0;
+}
+
+static int sd_setsatur(struct gspca_dev *gspca_dev, __s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sd->satur = val;
+ if (gspca_dev->streaming)
+ setsatur(gspca_dev);
+ return 0;
+}
+
+static int sd_getsatur(struct gspca_dev *gspca_dev, __s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ *val = sd->satur;
+ return 0;
+}
+static int sd_setfreq(struct gspca_dev *gspca_dev, __s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sd->lightfreq = val;
+ if (gspca_dev->streaming)
+ setfreq(gspca_dev);
+ return 0;
+}
+
+static int sd_getfreq(struct gspca_dev *gspca_dev, __s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ *val = sd->lightfreq;
+ return 0;
+}
+
+static int sd_setredblc(struct gspca_dev *gspca_dev, __s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sd->redblc = val;
+ if (gspca_dev->streaming)
+ setredblc(gspca_dev);
+ return 0;
+}
+
+static int sd_getredblc(struct gspca_dev *gspca_dev, __s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ *val = sd->redblc;
+ return 0;
+}
+
+static int sd_setblueblc(struct gspca_dev *gspca_dev, __s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sd->blueblc = val;
+ if (gspca_dev->streaming)
+ setblueblc(gspca_dev);
+ return 0;
+}
+
+static int sd_getblueblc(struct gspca_dev *gspca_dev, __s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ *val = sd->blueblc;
+ return 0;
+}
+
+static int sd_sethue(struct gspca_dev *gspca_dev, __s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sd->hue = val;
+ if (gspca_dev->streaming)
+ sethue(gspca_dev);
+ return 0;
+}
+
+static int sd_gethue(struct gspca_dev *gspca_dev, __s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ *val = sd->hue;
+ return 0;
+}
+
+static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sd->autogain = val;
+
+ if (gspca_dev->streaming) {
+ if (sd->sensor == SENSOR_OV772X) {
+
+ /* the auto white balance control works only
+ * when auto gain is set */
+ if (val)
+ gspca_dev->ctrl_inac &= ~(1 << AWB_77_IDX);
+ else
+ gspca_dev->ctrl_inac |= (1 << AWB_77_IDX);
+ setautogain_77(gspca_dev);
+ } else {
+ if (val)
+ gspca_dev->ctrl_inac |= (1 << EXPO_96_IDX);
+ else
+ gspca_dev->ctrl_inac &= ~(1 << EXPO_96_IDX);
+ setautogain_96(gspca_dev);
+ }
+ }
+ return 0;
+}
+
+static int sd_getautogain(struct gspca_dev *gspca_dev, __s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ *val = sd->autogain;
+ return 0;
+}
+
+static int sd_setawb(struct gspca_dev *gspca_dev, __s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sd->awb = val;
+ if (gspca_dev->streaming)
+ setawb(gspca_dev);
+ return 0;
+}
+
+static int sd_getawb(struct gspca_dev *gspca_dev, __s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ *val = sd->awb;
+ return 0;
+}
+
+static int sd_setsharpness(struct gspca_dev *gspca_dev, __s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sd->sharpness = val;
+ if (gspca_dev->streaming) {
+ if (sd->sensor == SENSOR_OV772X)
+ setsharpness_77(gspca_dev);
+ else
+ setsharpness_96(gspca_dev);
+ }
+ return 0;
+}
+
+static int sd_getsharpness(struct gspca_dev *gspca_dev, __s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ *val = sd->sharpness;
+ return 0;
+}
+
+static int sd_sethflip(struct gspca_dev *gspca_dev, __s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sd->hflip = val;
+ if (gspca_dev->streaming)
+ sethflip(gspca_dev);
+ return 0;
+}
+
+static int sd_gethflip(struct gspca_dev *gspca_dev, __s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ *val = sd->hflip;
+ return 0;
+}
+
+static int sd_setvflip(struct gspca_dev *gspca_dev, __s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sd->vflip = val;
+ if (gspca_dev->streaming)
+ setvflip(gspca_dev);
+ return 0;
+}
+
+static int sd_getvflip(struct gspca_dev *gspca_dev, __s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ *val = sd->vflip;
+ return 0;
+}
+
/* get stream parameters (framerate) */
static int sd_get_streamparm(struct gspca_dev *gspca_dev,
struct v4l2_streamparm *parm)
@@ -1047,7 +2257,8 @@
/* Set requested framerate */
sd->frame_rate = tpf->denominator / tpf->numerator;
- ov534_set_frame_rate(gspca_dev);
+ if (gspca_dev->streaming && sd->sensor == SENSOR_OV772X)
+ set_frame_rate(gspca_dev);
/* Return the actual framerate */
tpf->numerator = 1;
@@ -1056,20 +2267,53 @@
return 0;
}
+static int sd_querymenu(struct gspca_dev *gspca_dev,
+ struct v4l2_querymenu *menu)
+{
+ switch (menu->id) {
+ case V4L2_CID_POWER_LINE_FREQUENCY:
+ switch (menu->index) {
+ case 0: /* V4L2_CID_POWER_LINE_FREQUENCY_DISABLED */
+ strcpy((char *) menu->name, "NoFliker");
+ return 0;
+ case 1: /* V4L2_CID_POWER_LINE_FREQUENCY_50HZ */
+ strcpy((char *) menu->name, "50 Hz");
+ return 0;
+ case 2: /* V4L2_CID_POWER_LINE_FREQUENCY_60HZ */
+ strcpy((char *) menu->name, "60 Hz");
+ return 0;
+ }
+ break;
+ }
+ return -EINVAL;
+}
+
/* sub-driver description */
-static const struct sd_desc sd_desc = {
+static const struct sd_desc sd_desc_ov772x = {
.name = MODULE_NAME,
- .ctrls = sd_ctrls,
- .nctrls = ARRAY_SIZE(sd_ctrls),
+ .ctrls = sd_ctrls_ov772x,
+ .nctrls = ARRAY_SIZE(sd_ctrls_ov772x),
.config = sd_config,
.init = sd_init,
- .start = sd_start,
- .stopN = sd_stopN,
+ .start = sd_start_ov772x,
+ .stopN = sd_stopN_ov772x,
.pkt_scan = sd_pkt_scan,
.get_streamparm = sd_get_streamparm,
.set_streamparm = sd_set_streamparm,
};
+static const struct sd_desc sd_desc_ov965x = {
+ .name = MODULE_NAME,
+ .ctrls = sd_ctrls_ov965x,
+ .nctrls = ARRAY_SIZE(sd_ctrls_ov965x),
+ .config = sd_config,
+ .init = sd_init,
+ .start = sd_start_ov965x,
+ .stopN = sd_stopN_ov965x,
+ .pkt_scan = sd_pkt_scan,
+ .querymenu = sd_querymenu,
+};
+
/* -- module initialisation -- */
static const __devinitdata struct usb_device_id device_table[] = {
{USB_DEVICE(0x06f8, 0x3003), .driver_info = SENSOR_OV965X},
@@ -1082,8 +2326,12 @@
/* -- device connect -- */
static int sd_probe(struct usb_interface *intf, const struct usb_device_id *id)
{
- return gspca_dev_probe(intf, id, &sd_desc, sizeof(struct sd),
- THIS_MODULE);
+ return gspca_dev_probe(intf, id,
+ id->driver_info == SENSOR_OV772X
+ ? &sd_desc_ov772x
+ : &sd_desc_ov965x,
+ sizeof(struct sd),
+ THIS_MODULE);
}
static struct usb_driver sd_driver = {
@@ -1101,6 +2349,7 @@
static int __init sd_mod_init(void)
{
int ret;
+
ret = usb_register(&sd_driver);
if (ret < 0)
return ret;
diff --git a/drivers/media/video/gspca/pac207.c b/drivers/media/video/gspca/pac207.c
index 9665943..4706a82 100644
--- a/drivers/media/video/gspca/pac207.c
+++ b/drivers/media/video/gspca/pac207.c
@@ -337,14 +337,13 @@
}
static void sd_pkt_scan(struct gspca_dev *gspca_dev,
- struct gspca_frame *frame,
- __u8 *data,
+ u8 *data,
int len)
{
struct sd *sd = (struct sd *) gspca_dev;
unsigned char *sof;
- sof = pac_find_sof(gspca_dev, data, len);
+ sof = pac_find_sof(&sd->sof_read, data, len);
if (sof) {
int n;
@@ -354,10 +353,10 @@
n -= sizeof pac_sof_marker;
else
n = 0;
- frame = gspca_frame_add(gspca_dev, LAST_PACKET, frame,
- data, n);
+ gspca_frame_add(gspca_dev, LAST_PACKET,
+ data, n);
sd->header_read = 0;
- gspca_frame_add(gspca_dev, FIRST_PACKET, frame, NULL, 0);
+ gspca_frame_add(gspca_dev, FIRST_PACKET, NULL, 0);
len -= sof - data;
data = sof;
}
@@ -381,7 +380,7 @@
sd->header_read = 11;
}
- gspca_frame_add(gspca_dev, INTER_PACKET, frame, data, len);
+ gspca_frame_add(gspca_dev, INTER_PACKET, data, len);
}
static void setbrightness(struct gspca_dev *gspca_dev)
diff --git a/drivers/media/video/gspca/pac7302.c b/drivers/media/video/gspca/pac7302.c
new file mode 100644
index 0000000..74accee
--- /dev/null
+++ b/drivers/media/video/gspca/pac7302.c
@@ -0,0 +1,1272 @@
+/*
+ * Pixart PAC7302 library
+ * Copyright (C) 2005 Thomas Kaiser thomas@kaiser-linux.li
+ *
+ * V4L2 by Jean-Francois Moine <http://moinejf.free.fr>
+ *
+ * Separated from Pixart PAC7311 library by Márton Németh <nm127@freemail.hu>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+/* Some documentation about various registers as determined by trial and error.
+ When the register addresses differ between the 7202 and the 7311 the 2
+ different addresses are written as 7302addr/7311addr, when one of the 2
+ addresses is a - sign that register description is not valid for the
+ matching IC.
+
+ Register page 1:
+
+ Address Description
+ -/0x08 Unknown compressor related, must always be 8 except when not
+ in 640x480 resolution and page 4 reg 2 <= 3 then set it to 9 !
+ -/0x1b Auto white balance related, bit 0 is AWB enable (inverted)
+ bits 345 seem to toggle per color gains on/off (inverted)
+ 0x78 Global control, bit 6 controls the LED (inverted)
+ -/0x80 JPEG compression ratio ? Best not touched
+
+ Register page 3/4:
+
+ Address Description
+ 0x02 Clock divider 2-63, fps =~ 60 / val. Must be a multiple of 3 on
+ the 7302, so one of 3, 6, 9, ..., except when between 6 and 12?
+ -/0x0f Master gain 1-245, low value = high gain
+ 0x10/- Master gain 0-31
+ -/0x10 Another gain 0-15, limited influence (1-2x gain I guess)
+ 0x21 Bitfield: 0-1 unused, 2-3 vflip/hflip, 4-5 unknown, 6-7 unused
+ -/0x27 Seems to toggle various gains on / off, Setting bit 7 seems to
+ completely disable the analog amplification block. Set to 0x68
+ for max gain, 0x14 for minimal gain.
+
+ The registers are accessed in the following functions:
+
+ Page | Register | Function
+ -----+------------+---------------------------------------------------
+ 0 | 0x0f..0x20 | setcolors()
+ 0 | 0xa2..0xab | setbrightcont()
+ 0 | 0xc5 | setredbalance()
+ 0 | 0xc6 | setwhitebalance()
+ 0 | 0xc7 | setbluebalance()
+ 0 | 0xdc | setbrightcont(), setcolors()
+ 3 | 0x02 | setexposure()
+ 3 | 0x10 | setgain()
+ 3 | 0x11 | setcolors(), setgain(), setexposure(), sethvflip()
+ 3 | 0x21 | sethvflip()
+*/
+
+#define MODULE_NAME "pac7302"
+
+#include <media/v4l2-chip-ident.h>
+#include "gspca.h"
+
+MODULE_AUTHOR("Thomas Kaiser thomas@kaiser-linux.li");
+MODULE_DESCRIPTION("Pixart PAC7302");
+MODULE_LICENSE("GPL");
+
+/* specific webcam descriptor for pac7302 */
+struct sd {
+ struct gspca_dev gspca_dev; /* !! must be the first item */
+
+ unsigned char brightness;
+ unsigned char contrast;
+ unsigned char colors;
+ unsigned char white_balance;
+ unsigned char red_balance;
+ unsigned char blue_balance;
+ unsigned char gain;
+ unsigned char exposure;
+ unsigned char autogain;
+ __u8 hflip;
+ __u8 vflip;
+
+ u8 sof_read;
+ u8 autogain_ignore_frames;
+
+ atomic_t avg_lum;
+};
+
+/* V4L2 controls supported by the driver */
+static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_getbrightness(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_setcontrast(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_getcontrast(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_setcolors(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_getcolors(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_setwhitebalance(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_getwhitebalance(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_setredbalance(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_getredbalance(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_setbluebalance(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_getbluebalance(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_getautogain(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_sethflip(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_gethflip(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_setvflip(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_getvflip(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_setgain(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_getgain(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_setexposure(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_getexposure(struct gspca_dev *gspca_dev, __s32 *val);
+
+static struct ctrl sd_ctrls[] = {
+/* This control is pac7302 only */
+ {
+ {
+ .id = V4L2_CID_BRIGHTNESS,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Brightness",
+ .minimum = 0,
+#define BRIGHTNESS_MAX 0x20
+ .maximum = BRIGHTNESS_MAX,
+ .step = 1,
+#define BRIGHTNESS_DEF 0x10
+ .default_value = BRIGHTNESS_DEF,
+ },
+ .set = sd_setbrightness,
+ .get = sd_getbrightness,
+ },
+/* This control is for both the 7302 and the 7311 */
+ {
+ {
+ .id = V4L2_CID_CONTRAST,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Contrast",
+ .minimum = 0,
+#define CONTRAST_MAX 255
+ .maximum = CONTRAST_MAX,
+ .step = 1,
+#define CONTRAST_DEF 127
+ .default_value = CONTRAST_DEF,
+ },
+ .set = sd_setcontrast,
+ .get = sd_getcontrast,
+ },
+/* This control is pac7302 only */
+ {
+ {
+ .id = V4L2_CID_SATURATION,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Saturation",
+ .minimum = 0,
+#define COLOR_MAX 255
+ .maximum = COLOR_MAX,
+ .step = 1,
+#define COLOR_DEF 127
+ .default_value = COLOR_DEF,
+ },
+ .set = sd_setcolors,
+ .get = sd_getcolors,
+ },
+ {
+ {
+ .id = V4L2_CID_WHITE_BALANCE_TEMPERATURE,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "White Balance",
+ .minimum = 0,
+ .maximum = 255,
+ .step = 1,
+#define WHITEBALANCE_DEF 4
+ .default_value = WHITEBALANCE_DEF,
+ },
+ .set = sd_setwhitebalance,
+ .get = sd_getwhitebalance,
+ },
+ {
+ {
+ .id = V4L2_CID_RED_BALANCE,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Red",
+ .minimum = 0,
+ .maximum = 3,
+ .step = 1,
+#define REDBALANCE_DEF 1
+ .default_value = REDBALANCE_DEF,
+ },
+ .set = sd_setredbalance,
+ .get = sd_getredbalance,
+ },
+ {
+ {
+ .id = V4L2_CID_BLUE_BALANCE,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Blue",
+ .minimum = 0,
+ .maximum = 3,
+ .step = 1,
+#define BLUEBALANCE_DEF 1
+ .default_value = BLUEBALANCE_DEF,
+ },
+ .set = sd_setbluebalance,
+ .get = sd_getbluebalance,
+ },
+/* All controls below are for both the 7302 and the 7311 */
+ {
+ {
+ .id = V4L2_CID_GAIN,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Gain",
+ .minimum = 0,
+#define GAIN_MAX 255
+ .maximum = GAIN_MAX,
+ .step = 1,
+#define GAIN_DEF 127
+#define GAIN_KNEE 255 /* Gain seems to cause little noise on the pac73xx */
+ .default_value = GAIN_DEF,
+ },
+ .set = sd_setgain,
+ .get = sd_getgain,
+ },
+ {
+ {
+ .id = V4L2_CID_EXPOSURE,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Exposure",
+ .minimum = 0,
+#define EXPOSURE_MAX 255
+ .maximum = EXPOSURE_MAX,
+ .step = 1,
+#define EXPOSURE_DEF 16 /* 32 ms / 30 fps */
+#define EXPOSURE_KNEE 50 /* 100 ms / 10 fps */
+ .default_value = EXPOSURE_DEF,
+ },
+ .set = sd_setexposure,
+ .get = sd_getexposure,
+ },
+ {
+ {
+ .id = V4L2_CID_AUTOGAIN,
+ .type = V4L2_CTRL_TYPE_BOOLEAN,
+ .name = "Auto Gain",
+ .minimum = 0,
+ .maximum = 1,
+ .step = 1,
+#define AUTOGAIN_DEF 1
+ .default_value = AUTOGAIN_DEF,
+ },
+ .set = sd_setautogain,
+ .get = sd_getautogain,
+ },
+ {
+ {
+ .id = V4L2_CID_HFLIP,
+ .type = V4L2_CTRL_TYPE_BOOLEAN,
+ .name = "Mirror",
+ .minimum = 0,
+ .maximum = 1,
+ .step = 1,
+#define HFLIP_DEF 0
+ .default_value = HFLIP_DEF,
+ },
+ .set = sd_sethflip,
+ .get = sd_gethflip,
+ },
+ {
+ {
+ .id = V4L2_CID_VFLIP,
+ .type = V4L2_CTRL_TYPE_BOOLEAN,
+ .name = "Vflip",
+ .minimum = 0,
+ .maximum = 1,
+ .step = 1,
+#define VFLIP_DEF 0
+ .default_value = VFLIP_DEF,
+ },
+ .set = sd_setvflip,
+ .get = sd_getvflip,
+ },
+};
+
+static const struct v4l2_pix_format vga_mode[] = {
+ {640, 480, V4L2_PIX_FMT_PJPG, V4L2_FIELD_NONE,
+ .bytesperline = 640,
+ .sizeimage = 640 * 480 * 3 / 8 + 590,
+ .colorspace = V4L2_COLORSPACE_JPEG,
+ .priv = 0},
+};
+
+#define LOAD_PAGE3 255
+#define LOAD_PAGE4 254
+#define END_OF_SEQUENCE 0
+
+/* pac 7302 */
+static const __u8 init_7302[] = {
+/* index,value */
+ 0xff, 0x01, /* page 1 */
+ 0x78, 0x00, /* deactivate */
+ 0xff, 0x01,
+ 0x78, 0x40, /* led off */
+};
+static const __u8 start_7302[] = {
+/* index, len, [value]* */
+ 0xff, 1, 0x00, /* page 0 */
+ 0x00, 12, 0x01, 0x40, 0x40, 0x40, 0x01, 0xe0, 0x02, 0x80,
+ 0x00, 0x00, 0x00, 0x00,
+ 0x0d, 24, 0x03, 0x01, 0x00, 0xb5, 0x07, 0xcb, 0x00, 0x00,
+ 0x07, 0xc8, 0x00, 0xea, 0x07, 0xcf, 0x07, 0xf7,
+ 0x07, 0x7e, 0x01, 0x0b, 0x00, 0x00, 0x00, 0x11,
+ 0x26, 2, 0xaa, 0xaa,
+ 0x2e, 1, 0x31,
+ 0x38, 1, 0x01,
+ 0x3a, 3, 0x14, 0xff, 0x5a,
+ 0x43, 11, 0x00, 0x0a, 0x18, 0x11, 0x01, 0x2c, 0x88, 0x11,
+ 0x00, 0x54, 0x11,
+ 0x55, 1, 0x00,
+ 0x62, 4, 0x10, 0x1e, 0x1e, 0x18,
+ 0x6b, 1, 0x00,
+ 0x6e, 3, 0x08, 0x06, 0x00,
+ 0x72, 3, 0x00, 0xff, 0x00,
+ 0x7d, 23, 0x01, 0x01, 0x58, 0x46, 0x50, 0x3c, 0x50, 0x3c,
+ 0x54, 0x46, 0x54, 0x56, 0x52, 0x50, 0x52, 0x50,
+ 0x56, 0x64, 0xa4, 0x00, 0xda, 0x00, 0x00,
+ 0xa2, 10, 0x22, 0x2c, 0x3c, 0x54, 0x69, 0x7c, 0x9c, 0xb9,
+ 0xd2, 0xeb,
+ 0xaf, 1, 0x02,
+ 0xb5, 2, 0x08, 0x08,
+ 0xb8, 2, 0x08, 0x88,
+ 0xc4, 4, 0xae, 0x01, 0x04, 0x01,
+ 0xcc, 1, 0x00,
+ 0xd1, 11, 0x01, 0x30, 0x49, 0x5e, 0x6f, 0x7f, 0x8e, 0xa9,
+ 0xc1, 0xd7, 0xec,
+ 0xdc, 1, 0x01,
+ 0xff, 1, 0x01, /* page 1 */
+ 0x12, 3, 0x02, 0x00, 0x01,
+ 0x3e, 2, 0x00, 0x00,
+ 0x76, 5, 0x01, 0x20, 0x40, 0x00, 0xf2,
+ 0x7c, 1, 0x00,
+ 0x7f, 10, 0x4b, 0x0f, 0x01, 0x2c, 0x02, 0x58, 0x03, 0x20,
+ 0x02, 0x00,
+ 0x96, 5, 0x01, 0x10, 0x04, 0x01, 0x04,
+ 0xc8, 14, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00,
+ 0x07, 0x00, 0x01, 0x07, 0x04, 0x01,
+ 0xd8, 1, 0x01,
+ 0xdb, 2, 0x00, 0x01,
+ 0xde, 7, 0x00, 0x01, 0x04, 0x04, 0x00, 0x00, 0x00,
+ 0xe6, 4, 0x00, 0x00, 0x00, 0x01,
+ 0xeb, 1, 0x00,
+ 0xff, 1, 0x02, /* page 2 */
+ 0x22, 1, 0x00,
+ 0xff, 1, 0x03, /* page 3 */
+ 0, LOAD_PAGE3, /* load the page 3 */
+ 0x11, 1, 0x01,
+ 0xff, 1, 0x02, /* page 2 */
+ 0x13, 1, 0x00,
+ 0x22, 4, 0x1f, 0xa4, 0xf0, 0x96,
+ 0x27, 2, 0x14, 0x0c,
+ 0x2a, 5, 0xc8, 0x00, 0x18, 0x12, 0x22,
+ 0x64, 8, 0x00, 0x00, 0xf0, 0x01, 0x14, 0x44, 0x44, 0x44,
+ 0x6e, 1, 0x08,
+ 0xff, 1, 0x01, /* page 1 */
+ 0x78, 1, 0x00,
+ 0, END_OF_SEQUENCE /* end of sequence */
+};
+
+#define SKIP 0xaa
+/* page 3 - the value SKIP says skip the index - see reg_w_page() */
+static const __u8 page3_7302[] = {
+ 0x90, 0x40, 0x03, 0x50, 0xc2, 0x01, 0x14, 0x16,
+ 0x14, 0x12, 0x00, 0x00, 0x00, 0x02, 0x33, 0x00,
+ 0x0f, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x47, 0x01, 0xb3, 0x01, 0x00,
+ 0x00, 0x08, 0x00, 0x00, 0x0d, 0x00, 0x00, 0x21,
+ 0x00, 0x00, 0x00, 0x54, 0xf4, 0x02, 0x52, 0x54,
+ 0xa4, 0xb8, 0xe0, 0x2a, 0xf6, 0x00, 0x00, 0x00,
+ 0x00, 0x1e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0xfc, 0x00, 0xf2, 0x1f, 0x04, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0xc0, 0xc0, 0x10, 0x00, 0x00,
+ 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x40, 0xff, 0x03, 0x19, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0xc8, 0xc8, 0xc8,
+ 0xc8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x50,
+ 0x08, 0x10, 0x24, 0x40, 0x00, 0x00, 0x00, 0x00,
+ 0x01, 0x00, 0x02, 0x47, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x02, 0xfa, 0x00, 0x64, 0x5a, 0x28, 0x00,
+ 0x00
+};
+
+static int reg_w_buf(struct gspca_dev *gspca_dev,
+ __u8 index,
+ const char *buffer, int len)
+{
+ int ret;
+
+ memcpy(gspca_dev->usb_buf, buffer, len);
+ ret = usb_control_msg(gspca_dev->dev,
+ usb_sndctrlpipe(gspca_dev->dev, 0),
+ 1, /* request */
+ USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ 0, /* value */
+ index, gspca_dev->usb_buf, len,
+ 500);
+ if (ret < 0)
+ PDEBUG(D_ERR, "reg_w_buf(): "
+ "Failed to write registers to index 0x%x, error %i",
+ index, ret);
+ return ret;
+}
+
+
+static int reg_w(struct gspca_dev *gspca_dev,
+ __u8 index,
+ __u8 value)
+{
+ int ret;
+
+ gspca_dev->usb_buf[0] = value;
+ ret = usb_control_msg(gspca_dev->dev,
+ usb_sndctrlpipe(gspca_dev->dev, 0),
+ 0, /* request */
+ USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ 0, index, gspca_dev->usb_buf, 1,
+ 500);
+ if (ret < 0)
+ PDEBUG(D_ERR, "reg_w(): "
+ "Failed to write register to index 0x%x, value 0x%x, error %i",
+ index, value, ret);
+ return ret;
+}
+
+static int reg_w_seq(struct gspca_dev *gspca_dev,
+ const __u8 *seq, int len)
+{
+ int ret = 0;
+ while (--len >= 0) {
+ if (0 <= ret)
+ ret = reg_w(gspca_dev, seq[0], seq[1]);
+ seq += 2;
+ }
+ return ret;
+}
+
+/* load the beginning of a page */
+static int reg_w_page(struct gspca_dev *gspca_dev,
+ const __u8 *page, int len)
+{
+ int index;
+ int ret = 0;
+
+ for (index = 0; index < len; index++) {
+ if (page[index] == SKIP) /* skip this index */
+ continue;
+ gspca_dev->usb_buf[0] = page[index];
+ ret = usb_control_msg(gspca_dev->dev,
+ usb_sndctrlpipe(gspca_dev->dev, 0),
+ 0, /* request */
+ USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ 0, index, gspca_dev->usb_buf, 1,
+ 500);
+ if (ret < 0) {
+ PDEBUG(D_ERR, "reg_w_page(): "
+ "Failed to write register to index 0x%x, "
+ "value 0x%x, error %i",
+ index, page[index], ret);
+ break;
+ }
+ }
+ return ret;
+}
+
+/* output a variable sequence */
+static int reg_w_var(struct gspca_dev *gspca_dev,
+ const __u8 *seq,
+ const __u8 *page3, unsigned int page3_len,
+ const __u8 *page4, unsigned int page4_len)
+{
+ int index, len;
+ int ret = 0;
+
+ for (;;) {
+ index = *seq++;
+ len = *seq++;
+ switch (len) {
+ case END_OF_SEQUENCE:
+ return ret;
+ case LOAD_PAGE4:
+ ret = reg_w_page(gspca_dev, page4, page4_len);
+ break;
+ case LOAD_PAGE3:
+ ret = reg_w_page(gspca_dev, page3, page3_len);
+ break;
+ default:
+ if (len > USB_BUF_SZ) {
+ PDEBUG(D_ERR|D_STREAM,
+ "Incorrect variable sequence");
+ return -EINVAL;
+ }
+ while (len > 0) {
+ if (len < 8) {
+ ret = reg_w_buf(gspca_dev,
+ index, seq, len);
+ if (ret < 0)
+ return ret;
+ seq += len;
+ break;
+ }
+ ret = reg_w_buf(gspca_dev, index, seq, 8);
+ seq += 8;
+ index += 8;
+ len -= 8;
+ }
+ }
+ if (ret < 0)
+ return ret;
+ }
+ /* not reached */
+}
+
+/* this function is called at probe time for pac7302 */
+static int sd_config(struct gspca_dev *gspca_dev,
+ const struct usb_device_id *id)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ struct cam *cam;
+
+ cam = &gspca_dev->cam;
+
+ PDEBUG(D_CONF, "Find Sensor PAC7302");
+ cam->cam_mode = vga_mode; /* only 640x480 */
+ cam->nmodes = ARRAY_SIZE(vga_mode);
+
+ sd->brightness = BRIGHTNESS_DEF;
+ sd->contrast = CONTRAST_DEF;
+ sd->colors = COLOR_DEF;
+ sd->white_balance = WHITEBALANCE_DEF;
+ sd->red_balance = REDBALANCE_DEF;
+ sd->blue_balance = BLUEBALANCE_DEF;
+ sd->gain = GAIN_DEF;
+ sd->exposure = EXPOSURE_DEF;
+ sd->autogain = AUTOGAIN_DEF;
+ sd->hflip = HFLIP_DEF;
+ sd->vflip = VFLIP_DEF;
+ return 0;
+}
+
+/* This function is used by pac7302 only */
+static int setbrightcont(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ int i, v;
+ int ret;
+ static const __u8 max[10] =
+ {0x29, 0x33, 0x42, 0x5a, 0x6e, 0x80, 0x9f, 0xbb,
+ 0xd4, 0xec};
+ static const __u8 delta[10] =
+ {0x35, 0x33, 0x33, 0x2f, 0x2a, 0x25, 0x1e, 0x17,
+ 0x11, 0x0b};
+
+ ret = reg_w(gspca_dev, 0xff, 0x00); /* page 0 */
+ for (i = 0; i < 10; i++) {
+ v = max[i];
+ v += (sd->brightness - BRIGHTNESS_MAX)
+ * 150 / BRIGHTNESS_MAX; /* 200 ? */
+ v -= delta[i] * sd->contrast / CONTRAST_MAX;
+ if (v < 0)
+ v = 0;
+ else if (v > 0xff)
+ v = 0xff;
+ if (0 <= ret)
+ ret = reg_w(gspca_dev, 0xa2 + i, v);
+ }
+ if (0 <= ret)
+ ret = reg_w(gspca_dev, 0xdc, 0x01);
+ return ret;
+}
+
+/* This function is used by pac7302 only */
+static int setcolors(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ int i, v;
+ int ret;
+ static const int a[9] =
+ {217, -212, 0, -101, 170, -67, -38, -315, 355};
+ static const int b[9] =
+ {19, 106, 0, 19, 106, 1, 19, 106, 1};
+
+ ret = reg_w(gspca_dev, 0xff, 0x03); /* page 3 */
+ if (0 <= ret)
+ ret = reg_w(gspca_dev, 0x11, 0x01);
+ if (0 <= ret)
+ ret = reg_w(gspca_dev, 0xff, 0x00); /* page 0 */
+ for (i = 0; i < 9; i++) {
+ v = a[i] * sd->colors / COLOR_MAX + b[i];
+ if (0 <= ret)
+ ret = reg_w(gspca_dev, 0x0f + 2 * i, (v >> 8) & 0x07);
+ if (0 <= ret)
+ ret = reg_w(gspca_dev, 0x0f + 2 * i + 1, v);
+ }
+ if (0 <= ret)
+ ret = reg_w(gspca_dev, 0xdc, 0x01);
+ PDEBUG(D_CONF|D_STREAM, "color: %i", sd->colors);
+ return ret;
+}
+
+static int setwhitebalance(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ int ret;
+
+ ret = reg_w(gspca_dev, 0xff, 0x00); /* page 0 */
+ if (0 <= ret)
+ ret = reg_w(gspca_dev, 0xc6, sd->white_balance);
+
+ if (0 <= ret)
+ ret = reg_w(gspca_dev, 0xdc, 0x01);
+ PDEBUG(D_CONF|D_STREAM, "white_balance: %i", sd->white_balance);
+ return ret;
+}
+
+static int setredbalance(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ int ret;
+
+ ret = reg_w(gspca_dev, 0xff, 0x00); /* page 0 */
+ if (0 <= ret)
+ ret = reg_w(gspca_dev, 0xc5, sd->red_balance);
+
+ if (0 <= ret)
+ ret = reg_w(gspca_dev, 0xdc, 0x01);
+ PDEBUG(D_CONF|D_STREAM, "red_balance: %i", sd->red_balance);
+ return ret;
+}
+
+static int setbluebalance(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ int ret;
+
+ ret = reg_w(gspca_dev, 0xff, 0x00); /* page 0 */
+ if (0 <= ret)
+ ret = reg_w(gspca_dev, 0xc7, sd->blue_balance);
+
+ if (0 <= ret)
+ ret = reg_w(gspca_dev, 0xdc, 0x01);
+ PDEBUG(D_CONF|D_STREAM, "blue_balance: %i", sd->blue_balance);
+ return ret;
+}
+
+static int setgain(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ int ret;
+
+ ret = reg_w(gspca_dev, 0xff, 0x03); /* page 3 */
+ if (0 <= ret)
+ ret = reg_w(gspca_dev, 0x10, sd->gain >> 3);
+
+ /* load registers to sensor (Bit 0, auto clear) */
+ if (0 <= ret)
+ ret = reg_w(gspca_dev, 0x11, 0x01);
+ return ret;
+}
+
+static int setexposure(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ int ret;
+ __u8 reg;
+
+ /* register 2 of frame 3/4 contains the clock divider configuring the
+ no fps according to the formula: 60 / reg. sd->exposure is the
+ desired exposure time in ms. */
+ reg = 120 * sd->exposure / 1000;
+ if (reg < 2)
+ reg = 2;
+ else if (reg > 63)
+ reg = 63;
+
+ /* On the pac7302 reg2 MUST be a multiple of 3, so round it to
+ the nearest multiple of 3, except when between 6 and 12? */
+ if (reg < 6 || reg > 12)
+ reg = ((reg + 1) / 3) * 3;
+ ret = reg_w(gspca_dev, 0xff, 0x03); /* page 3 */
+ if (0 <= ret)
+ ret = reg_w(gspca_dev, 0x02, reg);
+
+ /* load registers to sensor (Bit 0, auto clear) */
+ if (0 <= ret)
+ ret = reg_w(gspca_dev, 0x11, 0x01);
+ return ret;
+}
+
+static int sethvflip(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ int ret;
+ __u8 data;
+
+ ret = reg_w(gspca_dev, 0xff, 0x03); /* page 3 */
+ data = (sd->hflip ? 0x08 : 0x00) | (sd->vflip ? 0x04 : 0x00);
+ if (0 <= ret)
+ ret = reg_w(gspca_dev, 0x21, data);
+ /* load registers to sensor (Bit 0, auto clear) */
+ if (0 <= ret)
+ ret = reg_w(gspca_dev, 0x11, 0x01);
+ return ret;
+}
+
+/* this function is called at probe and resume time for pac7302 */
+static int sd_init(struct gspca_dev *gspca_dev)
+{
+ return reg_w_seq(gspca_dev, init_7302, sizeof(init_7302)/2);
+}
+
+static int sd_start(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ int ret = 0;
+
+ sd->sof_read = 0;
+
+ ret = reg_w_var(gspca_dev, start_7302,
+ page3_7302, sizeof(page3_7302),
+ NULL, 0);
+ if (0 <= ret)
+ ret = setbrightcont(gspca_dev);
+ if (0 <= ret)
+ ret = setcolors(gspca_dev);
+ if (0 <= ret)
+ ret = setwhitebalance(gspca_dev);
+ if (0 <= ret)
+ ret = setredbalance(gspca_dev);
+ if (0 <= ret)
+ ret = setbluebalance(gspca_dev);
+ if (0 <= ret)
+ ret = setgain(gspca_dev);
+ if (0 <= ret)
+ ret = setexposure(gspca_dev);
+ if (0 <= ret)
+ ret = sethvflip(gspca_dev);
+
+ /* only resolution 640x480 is supported for pac7302 */
+
+ sd->sof_read = 0;
+ sd->autogain_ignore_frames = 0;
+ atomic_set(&sd->avg_lum, -1);
+
+ /* start stream */
+ if (0 <= ret)
+ ret = reg_w(gspca_dev, 0xff, 0x01);
+ if (0 <= ret)
+ ret = reg_w(gspca_dev, 0x78, 0x01);
+
+ return ret;
+}
+
+static void sd_stopN(struct gspca_dev *gspca_dev)
+{
+ int ret;
+
+ /* stop stream */
+ ret = reg_w(gspca_dev, 0xff, 0x01);
+ if (0 <= ret)
+ ret = reg_w(gspca_dev, 0x78, 0x00);
+}
+
+/* called on streamoff with alt 0 and on disconnect for pac7302 */
+static void sd_stop0(struct gspca_dev *gspca_dev)
+{
+ int ret;
+
+ if (!gspca_dev->present)
+ return;
+ ret = reg_w(gspca_dev, 0xff, 0x01);
+ if (0 <= ret)
+ ret = reg_w(gspca_dev, 0x78, 0x40);
+}
+
+/* Include pac common sof detection functions */
+#include "pac_common.h"
+
+static void do_autogain(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ int avg_lum = atomic_read(&sd->avg_lum);
+ int desired_lum, deadzone;
+
+ if (avg_lum == -1)
+ return;
+
+ desired_lum = 270 + sd->brightness * 4;
+ /* Hack hack, with the 7202 the first exposure step is
+ pretty large, so if we're about to make the first
+ exposure increase make the deadzone large to avoid
+ oscilating */
+ if (desired_lum > avg_lum && sd->gain == GAIN_DEF &&
+ sd->exposure > EXPOSURE_DEF &&
+ sd->exposure < 42)
+ deadzone = 90;
+ else
+ deadzone = 30;
+
+ if (sd->autogain_ignore_frames > 0)
+ sd->autogain_ignore_frames--;
+ else if (gspca_auto_gain_n_exposure(gspca_dev, avg_lum, desired_lum,
+ deadzone, GAIN_KNEE, EXPOSURE_KNEE))
+ sd->autogain_ignore_frames = PAC_AUTOGAIN_IGNORE_FRAMES;
+}
+
+/* JPEG header, part 1 */
+static const unsigned char pac_jpeg_header1[] = {
+ 0xff, 0xd8, /* SOI: Start of Image */
+
+ 0xff, 0xc0, /* SOF0: Start of Frame (Baseline DCT) */
+ 0x00, 0x11, /* length = 17 bytes (including this length field) */
+ 0x08 /* Precision: 8 */
+ /* 2 bytes is placed here: number of image lines */
+ /* 2 bytes is placed here: samples per line */
+};
+
+/* JPEG header, continued */
+static const unsigned char pac_jpeg_header2[] = {
+ 0x03, /* Number of image components: 3 */
+ 0x01, 0x21, 0x00, /* ID=1, Subsampling 1x1, Quantization table: 0 */
+ 0x02, 0x11, 0x01, /* ID=2, Subsampling 2x1, Quantization table: 1 */
+ 0x03, 0x11, 0x01, /* ID=3, Subsampling 2x1, Quantization table: 1 */
+
+ 0xff, 0xda, /* SOS: Start Of Scan */
+ 0x00, 0x0c, /* length = 12 bytes (including this length field) */
+ 0x03, /* number of components: 3 */
+ 0x01, 0x00, /* selector 1, table 0x00 */
+ 0x02, 0x11, /* selector 2, table 0x11 */
+ 0x03, 0x11, /* selector 3, table 0x11 */
+ 0x00, 0x3f, /* Spectral selection: 0 .. 63 */
+ 0x00 /* Successive approximation: 0 */
+};
+
+static void pac_start_frame(struct gspca_dev *gspca_dev,
+ struct gspca_frame *frame,
+ __u16 lines, __u16 samples_per_line)
+{
+ unsigned char tmpbuf[4];
+
+ gspca_frame_add(gspca_dev, FIRST_PACKET,
+ pac_jpeg_header1, sizeof(pac_jpeg_header1));
+
+ tmpbuf[0] = lines >> 8;
+ tmpbuf[1] = lines & 0xff;
+ tmpbuf[2] = samples_per_line >> 8;
+ tmpbuf[3] = samples_per_line & 0xff;
+
+ gspca_frame_add(gspca_dev, INTER_PACKET,
+ tmpbuf, sizeof(tmpbuf));
+ gspca_frame_add(gspca_dev, INTER_PACKET,
+ pac_jpeg_header2, sizeof(pac_jpeg_header2));
+}
+
+/* this function is run at interrupt level */
+static void sd_pkt_scan(struct gspca_dev *gspca_dev,
+ u8 *data, /* isoc packet */
+ int len) /* iso packet length */
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ struct gspca_frame *frame;
+ unsigned char *sof;
+
+ sof = pac_find_sof(&sd->sof_read, data, len);
+ if (sof) {
+ int n, lum_offset, footer_length;
+
+ frame = gspca_get_i_frame(gspca_dev);
+ if (frame == NULL) {
+ gspca_dev->last_packet_type = DISCARD_PACKET;
+ return;
+ }
+
+ /* 6 bytes after the FF D9 EOF marker a number of lumination
+ bytes are send corresponding to different parts of the
+ image, the 14th and 15th byte after the EOF seem to
+ correspond to the center of the image */
+ lum_offset = 61 + sizeof pac_sof_marker;
+ footer_length = 74;
+
+ /* Finish decoding current frame */
+ n = (sof - data) - (footer_length + sizeof pac_sof_marker);
+ if (n < 0) {
+ frame->data_end += n;
+ n = 0;
+ }
+ gspca_frame_add(gspca_dev, INTER_PACKET,
+ data, n);
+ if (gspca_dev->last_packet_type != DISCARD_PACKET &&
+ frame->data_end[-2] == 0xff &&
+ frame->data_end[-1] == 0xd9)
+ gspca_frame_add(gspca_dev, LAST_PACKET,
+ NULL, 0);
+
+ n = sof - data;
+ len -= n;
+ data = sof;
+
+ /* Get average lumination */
+ if (gspca_dev->last_packet_type == LAST_PACKET &&
+ n >= lum_offset)
+ atomic_set(&sd->avg_lum, data[-lum_offset] +
+ data[-lum_offset + 1]);
+ else
+ atomic_set(&sd->avg_lum, -1);
+
+ /* Start the new frame with the jpeg header */
+ /* The PAC7302 has the image rotated 90 degrees */
+ pac_start_frame(gspca_dev, frame,
+ gspca_dev->width, gspca_dev->height);
+ }
+ gspca_frame_add(gspca_dev, INTER_PACKET, data, len);
+}
+
+static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sd->brightness = val;
+ if (gspca_dev->streaming)
+ setbrightcont(gspca_dev);
+ return 0;
+}
+
+static int sd_getbrightness(struct gspca_dev *gspca_dev, __s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ *val = sd->brightness;
+ return 0;
+}
+
+static int sd_setcontrast(struct gspca_dev *gspca_dev, __s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sd->contrast = val;
+ if (gspca_dev->streaming) {
+ setbrightcont(gspca_dev);
+ }
+ return 0;
+}
+
+static int sd_getcontrast(struct gspca_dev *gspca_dev, __s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ *val = sd->contrast;
+ return 0;
+}
+
+static int sd_setcolors(struct gspca_dev *gspca_dev, __s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sd->colors = val;
+ if (gspca_dev->streaming)
+ setcolors(gspca_dev);
+ return 0;
+}
+
+static int sd_getcolors(struct gspca_dev *gspca_dev, __s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ *val = sd->colors;
+ return 0;
+}
+
+static int sd_setwhitebalance(struct gspca_dev *gspca_dev, __s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ int ret = 0;
+
+ sd->white_balance = val;
+ if (gspca_dev->streaming)
+ ret = setwhitebalance(gspca_dev);
+ if (0 <= ret)
+ ret = 0;
+ return ret;
+}
+
+static int sd_getwhitebalance(struct gspca_dev *gspca_dev, __s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ *val = sd->white_balance;
+ return 0;
+}
+
+static int sd_setredbalance(struct gspca_dev *gspca_dev, __s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ int ret = 0;
+
+ sd->red_balance = val;
+ if (gspca_dev->streaming)
+ ret = setredbalance(gspca_dev);
+ if (0 <= ret)
+ ret = 0;
+ return ret;
+}
+
+static int sd_getredbalance(struct gspca_dev *gspca_dev, __s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ *val = sd->red_balance;
+ return 0;
+}
+
+static int sd_setbluebalance(struct gspca_dev *gspca_dev, __s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+ int ret = 0;
+
+ sd->blue_balance = val;
+ if (gspca_dev->streaming)
+ ret = setbluebalance(gspca_dev);
+ if (0 <= ret)
+ ret = 0;
+ return ret;
+}
+
+static int sd_getbluebalance(struct gspca_dev *gspca_dev, __s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ *val = sd->blue_balance;
+ return 0;
+}
+
+static int sd_setgain(struct gspca_dev *gspca_dev, __s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sd->gain = val;
+ if (gspca_dev->streaming)
+ setgain(gspca_dev);
+ return 0;
+}
+
+static int sd_getgain(struct gspca_dev *gspca_dev, __s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ *val = sd->gain;
+ return 0;
+}
+
+static int sd_setexposure(struct gspca_dev *gspca_dev, __s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sd->exposure = val;
+ if (gspca_dev->streaming)
+ setexposure(gspca_dev);
+ return 0;
+}
+
+static int sd_getexposure(struct gspca_dev *gspca_dev, __s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ *val = sd->exposure;
+ return 0;
+}
+
+static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sd->autogain = val;
+ /* when switching to autogain set defaults to make sure
+ we are on a valid point of the autogain gain /
+ exposure knee graph, and give this change time to
+ take effect before doing autogain. */
+ if (sd->autogain) {
+ sd->exposure = EXPOSURE_DEF;
+ sd->gain = GAIN_DEF;
+ if (gspca_dev->streaming) {
+ sd->autogain_ignore_frames =
+ PAC_AUTOGAIN_IGNORE_FRAMES;
+ setexposure(gspca_dev);
+ setgain(gspca_dev);
+ }
+ }
+
+ return 0;
+}
+
+static int sd_getautogain(struct gspca_dev *gspca_dev, __s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ *val = sd->autogain;
+ return 0;
+}
+
+static int sd_sethflip(struct gspca_dev *gspca_dev, __s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sd->hflip = val;
+ if (gspca_dev->streaming)
+ sethvflip(gspca_dev);
+ return 0;
+}
+
+static int sd_gethflip(struct gspca_dev *gspca_dev, __s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ *val = sd->hflip;
+ return 0;
+}
+
+static int sd_setvflip(struct gspca_dev *gspca_dev, __s32 val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ sd->vflip = val;
+ if (gspca_dev->streaming)
+ sethvflip(gspca_dev);
+ return 0;
+}
+
+static int sd_getvflip(struct gspca_dev *gspca_dev, __s32 *val)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ *val = sd->vflip;
+ return 0;
+}
+
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+static int sd_dbg_s_register(struct gspca_dev *gspca_dev,
+ struct v4l2_dbg_register *reg)
+{
+ int ret = -EINVAL;
+ __u8 index;
+ __u8 value;
+
+ /* reg->reg: bit0..15: reserved for register index (wIndex is 16bit
+ long on the USB bus)
+ */
+ if (reg->match.type == V4L2_CHIP_MATCH_HOST &&
+ reg->match.addr == 0 &&
+ (reg->reg < 0x000000ff) &&
+ (reg->val <= 0x000000ff)
+ ) {
+ /* Currently writing to page 0 is only supported. */
+ /* reg_w() only supports 8bit index */
+ index = reg->reg & 0x000000ff;
+ value = reg->val & 0x000000ff;
+
+ /* Note that there shall be no access to other page
+ by any other function between the page swith and
+ the actual register write */
+ ret = reg_w(gspca_dev, 0xff, 0x00); /* page 0 */
+ if (0 <= ret)
+ ret = reg_w(gspca_dev, index, value);
+
+ if (0 <= ret)
+ ret = reg_w(gspca_dev, 0xdc, 0x01);
+ }
+ return ret;
+}
+
+static int sd_chip_ident(struct gspca_dev *gspca_dev,
+ struct v4l2_dbg_chip_ident *chip)
+{
+ int ret = -EINVAL;
+
+ if (chip->match.type == V4L2_CHIP_MATCH_HOST &&
+ chip->match.addr == 0) {
+ chip->revision = 0;
+ chip->ident = V4L2_IDENT_UNKNOWN;
+ ret = 0;
+ }
+ return ret;
+}
+#endif
+
+/* sub-driver description for pac7302 */
+static struct sd_desc sd_desc = {
+ .name = MODULE_NAME,
+ .ctrls = sd_ctrls,
+ .nctrls = ARRAY_SIZE(sd_ctrls),
+ .config = sd_config,
+ .init = sd_init,
+ .start = sd_start,
+ .stopN = sd_stopN,
+ .stop0 = sd_stop0,
+ .pkt_scan = sd_pkt_scan,
+ .dq_callback = do_autogain,
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+ .set_register = sd_dbg_s_register,
+ .get_chip_ident = sd_chip_ident,
+#endif
+};
+
+/* -- module initialisation -- */
+static __devinitdata struct usb_device_id device_table[] = {
+ {USB_DEVICE(0x06f8, 0x3009)},
+ {USB_DEVICE(0x093a, 0x2620)},
+ {USB_DEVICE(0x093a, 0x2621)},
+ {USB_DEVICE(0x093a, 0x2622)},
+ {USB_DEVICE(0x093a, 0x2624)},
+ {USB_DEVICE(0x093a, 0x2626)},
+ {USB_DEVICE(0x093a, 0x2628)},
+ {USB_DEVICE(0x093a, 0x2629)},
+ {USB_DEVICE(0x093a, 0x262a)},
+ {USB_DEVICE(0x093a, 0x262c)},
+ {}
+};
+MODULE_DEVICE_TABLE(usb, device_table);
+
+/* -- device connect -- */
+static int sd_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ return gspca_dev_probe(intf, id, &sd_desc, sizeof(struct sd),
+ THIS_MODULE);
+}
+
+static struct usb_driver sd_driver = {
+ .name = MODULE_NAME,
+ .id_table = device_table,
+ .probe = sd_probe,
+ .disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+ .suspend = gspca_suspend,
+ .resume = gspca_resume,
+#endif
+};
+
+/* -- module insert / remove -- */
+static int __init sd_mod_init(void)
+{
+ int ret;
+ ret = usb_register(&sd_driver);
+ if (ret < 0)
+ return ret;
+ PDEBUG(D_PROBE, "registered");
+ return 0;
+}
+static void __exit sd_mod_exit(void)
+{
+ usb_deregister(&sd_driver);
+ PDEBUG(D_PROBE, "deregistered");
+}
+
+module_init(sd_mod_init);
+module_exit(sd_mod_exit);
diff --git a/drivers/media/video/gspca/pac7311.c b/drivers/media/video/gspca/pac7311.c
index 0527144..e5697a6 100644
--- a/drivers/media/video/gspca/pac7311.c
+++ b/drivers/media/video/gspca/pac7311.c
@@ -57,23 +57,17 @@
MODULE_DESCRIPTION("Pixart PAC7311");
MODULE_LICENSE("GPL");
-/* specific webcam descriptor */
+/* specific webcam descriptor for pac7311 */
struct sd {
struct gspca_dev gspca_dev; /* !! must be the first item */
- unsigned char brightness;
unsigned char contrast;
- unsigned char colors;
unsigned char gain;
unsigned char exposure;
unsigned char autogain;
__u8 hflip;
__u8 vflip;
- __u8 sensor;
-#define SENSOR_PAC7302 0
-#define SENSOR_PAC7311 1
-
u8 sof_read;
u8 autogain_ignore_frames;
@@ -81,12 +75,8 @@
};
/* V4L2 controls supported by the driver */
-static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val);
-static int sd_getbrightness(struct gspca_dev *gspca_dev, __s32 *val);
static int sd_setcontrast(struct gspca_dev *gspca_dev, __s32 val);
static int sd_getcontrast(struct gspca_dev *gspca_dev, __s32 *val);
-static int sd_setcolors(struct gspca_dev *gspca_dev, __s32 val);
-static int sd_getcolors(struct gspca_dev *gspca_dev, __s32 *val);
static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val);
static int sd_getautogain(struct gspca_dev *gspca_dev, __s32 *val);
static int sd_sethflip(struct gspca_dev *gspca_dev, __s32 val);
@@ -99,23 +89,6 @@
static int sd_getexposure(struct gspca_dev *gspca_dev, __s32 *val);
static struct ctrl sd_ctrls[] = {
-/* This control is pac7302 only */
-#define BRIGHTNESS_IDX 0
- {
- {
- .id = V4L2_CID_BRIGHTNESS,
- .type = V4L2_CTRL_TYPE_INTEGER,
- .name = "Brightness",
- .minimum = 0,
-#define BRIGHTNESS_MAX 0x20
- .maximum = BRIGHTNESS_MAX,
- .step = 1,
-#define BRIGHTNESS_DEF 0x10
- .default_value = BRIGHTNESS_DEF,
- },
- .set = sd_setbrightness,
- .get = sd_getbrightness,
- },
/* This control is for both the 7302 and the 7311 */
{
{
@@ -132,23 +105,6 @@
.set = sd_setcontrast,
.get = sd_getcontrast,
},
-/* This control is pac7302 only */
-#define SATURATION_IDX 2
- {
- {
- .id = V4L2_CID_SATURATION,
- .type = V4L2_CTRL_TYPE_INTEGER,
- .name = "Saturation",
- .minimum = 0,
-#define COLOR_MAX 255
- .maximum = COLOR_MAX,
- .step = 1,
-#define COLOR_DEF 127
- .default_value = COLOR_DEF,
- },
- .set = sd_setcolors,
- .get = sd_getcolors,
- },
/* All controls below are for both the 7302 and the 7311 */
{
{
@@ -244,101 +200,9 @@
.priv = 0},
};
-/* pac 7302 */
-static const __u8 init_7302[] = {
-/* index,value */
- 0xff, 0x01, /* page 1 */
- 0x78, 0x00, /* deactivate */
- 0xff, 0x01,
- 0x78, 0x40, /* led off */
-};
-static const __u8 start_7302[] = {
-/* index, len, [value]* */
- 0xff, 1, 0x00, /* page 0 */
- 0x00, 12, 0x01, 0x40, 0x40, 0x40, 0x01, 0xe0, 0x02, 0x80,
- 0x00, 0x00, 0x00, 0x00,
- 0x0d, 24, 0x03, 0x01, 0x00, 0xb5, 0x07, 0xcb, 0x00, 0x00,
- 0x07, 0xc8, 0x00, 0xea, 0x07, 0xcf, 0x07, 0xf7,
- 0x07, 0x7e, 0x01, 0x0b, 0x00, 0x00, 0x00, 0x11,
- 0x26, 2, 0xaa, 0xaa,
- 0x2e, 1, 0x31,
- 0x38, 1, 0x01,
- 0x3a, 3, 0x14, 0xff, 0x5a,
- 0x43, 11, 0x00, 0x0a, 0x18, 0x11, 0x01, 0x2c, 0x88, 0x11,
- 0x00, 0x54, 0x11,
- 0x55, 1, 0x00,
- 0x62, 4, 0x10, 0x1e, 0x1e, 0x18,
- 0x6b, 1, 0x00,
- 0x6e, 3, 0x08, 0x06, 0x00,
- 0x72, 3, 0x00, 0xff, 0x00,
- 0x7d, 23, 0x01, 0x01, 0x58, 0x46, 0x50, 0x3c, 0x50, 0x3c,
- 0x54, 0x46, 0x54, 0x56, 0x52, 0x50, 0x52, 0x50,
- 0x56, 0x64, 0xa4, 0x00, 0xda, 0x00, 0x00,
- 0xa2, 10, 0x22, 0x2c, 0x3c, 0x54, 0x69, 0x7c, 0x9c, 0xb9,
- 0xd2, 0xeb,
- 0xaf, 1, 0x02,
- 0xb5, 2, 0x08, 0x08,
- 0xb8, 2, 0x08, 0x88,
- 0xc4, 4, 0xae, 0x01, 0x04, 0x01,
- 0xcc, 1, 0x00,
- 0xd1, 11, 0x01, 0x30, 0x49, 0x5e, 0x6f, 0x7f, 0x8e, 0xa9,
- 0xc1, 0xd7, 0xec,
- 0xdc, 1, 0x01,
- 0xff, 1, 0x01, /* page 1 */
- 0x12, 3, 0x02, 0x00, 0x01,
- 0x3e, 2, 0x00, 0x00,
- 0x76, 5, 0x01, 0x20, 0x40, 0x00, 0xf2,
- 0x7c, 1, 0x00,
- 0x7f, 10, 0x4b, 0x0f, 0x01, 0x2c, 0x02, 0x58, 0x03, 0x20,
- 0x02, 0x00,
- 0x96, 5, 0x01, 0x10, 0x04, 0x01, 0x04,
- 0xc8, 14, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00,
- 0x07, 0x00, 0x01, 0x07, 0x04, 0x01,
- 0xd8, 1, 0x01,
- 0xdb, 2, 0x00, 0x01,
- 0xde, 7, 0x00, 0x01, 0x04, 0x04, 0x00, 0x00, 0x00,
- 0xe6, 4, 0x00, 0x00, 0x00, 0x01,
- 0xeb, 1, 0x00,
- 0xff, 1, 0x02, /* page 2 */
- 0x22, 1, 0x00,
- 0xff, 1, 0x03, /* page 3 */
- 0x00, 255, /* load the page 3 */
- 0x11, 1, 0x01,
- 0xff, 1, 0x02, /* page 2 */
- 0x13, 1, 0x00,
- 0x22, 4, 0x1f, 0xa4, 0xf0, 0x96,
- 0x27, 2, 0x14, 0x0c,
- 0x2a, 5, 0xc8, 0x00, 0x18, 0x12, 0x22,
- 0x64, 8, 0x00, 0x00, 0xf0, 0x01, 0x14, 0x44, 0x44, 0x44,
- 0x6e, 1, 0x08,
- 0xff, 1, 0x01, /* page 1 */
- 0x78, 1, 0x00,
- 0, 0 /* end of sequence */
-};
-
-/* page 3 - the value 0xaa says skip the index - see reg_w_page() */
-static const __u8 page3_7302[] = {
- 0x90, 0x40, 0x03, 0x50, 0xc2, 0x01, 0x14, 0x16,
- 0x14, 0x12, 0x00, 0x00, 0x00, 0x02, 0x33, 0x00,
- 0x0f, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x47, 0x01, 0xb3, 0x01, 0x00,
- 0x00, 0x08, 0x00, 0x00, 0x0d, 0x00, 0x00, 0x21,
- 0x00, 0x00, 0x00, 0x54, 0xf4, 0x02, 0x52, 0x54,
- 0xa4, 0xb8, 0xe0, 0x2a, 0xf6, 0x00, 0x00, 0x00,
- 0x00, 0x1e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0xfc, 0x00, 0xf2, 0x1f, 0x04, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0xc0, 0xc0, 0x10, 0x00, 0x00,
- 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x40, 0xff, 0x03, 0x19, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0xc8, 0xc8, 0xc8,
- 0xc8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x50,
- 0x08, 0x10, 0x24, 0x40, 0x00, 0x00, 0x00, 0x00,
- 0x01, 0x00, 0x02, 0x47, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x02, 0xfa, 0x00, 0x64, 0x5a, 0x28, 0x00,
- 0x00
-};
+#define LOAD_PAGE3 255
+#define LOAD_PAGE4 254
+#define END_OF_SEQUENCE 0
/* pac 7311 */
static const __u8 init_7311[] = {
@@ -378,119 +242,154 @@
0xf0, 13, 0x01, 0x00, 0x00, 0x00, 0x22, 0x00, 0x20, 0x00,
0x3f, 0x00, 0x0a, 0x01, 0x00,
0xff, 1, 0x04, /* page 4 */
- 0x00, 254, /* load the page 4 */
+ 0, LOAD_PAGE4, /* load the page 4 */
0x11, 1, 0x01,
- 0, 0 /* end of sequence */
+ 0, END_OF_SEQUENCE /* end of sequence */
};
-/* page 4 - the value 0xaa says skip the index - see reg_w_page() */
+#define SKIP 0xaa
+/* page 4 - the value SKIP says skip the index - see reg_w_page() */
static const __u8 page4_7311[] = {
- 0xaa, 0xaa, 0x04, 0x54, 0x07, 0x2b, 0x09, 0x0f,
- 0x09, 0x00, 0xaa, 0xaa, 0x07, 0x00, 0x00, 0x62,
- 0x08, 0xaa, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x03, 0xa0, 0x01, 0xf4, 0xaa,
- 0xaa, 0x00, 0x08, 0xaa, 0x03, 0xaa, 0x00, 0x68,
+ SKIP, SKIP, 0x04, 0x54, 0x07, 0x2b, 0x09, 0x0f,
+ 0x09, 0x00, SKIP, SKIP, 0x07, 0x00, 0x00, 0x62,
+ 0x08, SKIP, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x03, 0xa0, 0x01, 0xf4, SKIP,
+ SKIP, 0x00, 0x08, SKIP, 0x03, SKIP, 0x00, 0x68,
0xca, 0x10, 0x06, 0x78, 0x00, 0x00, 0x00, 0x00,
0x23, 0x28, 0x04, 0x11, 0x00, 0x00
};
-static void reg_w_buf(struct gspca_dev *gspca_dev,
+static int reg_w_buf(struct gspca_dev *gspca_dev,
__u8 index,
const char *buffer, int len)
{
+ int ret;
+
memcpy(gspca_dev->usb_buf, buffer, len);
- usb_control_msg(gspca_dev->dev,
+ ret = usb_control_msg(gspca_dev->dev,
usb_sndctrlpipe(gspca_dev->dev, 0),
1, /* request */
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
0, /* value */
index, gspca_dev->usb_buf, len,
500);
+ if (ret < 0)
+ PDEBUG(D_ERR, "reg_w_buf(): "
+ "Failed to write registers to index 0x%x, error %i",
+ index, ret);
+ return ret;
}
-static void reg_w(struct gspca_dev *gspca_dev,
+static int reg_w(struct gspca_dev *gspca_dev,
__u8 index,
__u8 value)
{
+ int ret;
+
gspca_dev->usb_buf[0] = value;
- usb_control_msg(gspca_dev->dev,
+ ret = usb_control_msg(gspca_dev->dev,
usb_sndctrlpipe(gspca_dev->dev, 0),
0, /* request */
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
0, index, gspca_dev->usb_buf, 1,
500);
+ if (ret < 0)
+ PDEBUG(D_ERR, "reg_w(): "
+ "Failed to write register to index 0x%x, value 0x%x, error %i",
+ index, value, ret);
+ return ret;
}
-static void reg_w_seq(struct gspca_dev *gspca_dev,
+static int reg_w_seq(struct gspca_dev *gspca_dev,
const __u8 *seq, int len)
{
+ int ret = 0;
while (--len >= 0) {
- reg_w(gspca_dev, seq[0], seq[1]);
+ if (0 <= ret)
+ ret = reg_w(gspca_dev, seq[0], seq[1]);
seq += 2;
}
+ return ret;
}
/* load the beginning of a page */
-static void reg_w_page(struct gspca_dev *gspca_dev,
+static int reg_w_page(struct gspca_dev *gspca_dev,
const __u8 *page, int len)
{
int index;
+ int ret = 0;
for (index = 0; index < len; index++) {
- if (page[index] == 0xaa) /* skip this index */
+ if (page[index] == SKIP) /* skip this index */
continue;
gspca_dev->usb_buf[0] = page[index];
- usb_control_msg(gspca_dev->dev,
+ ret = usb_control_msg(gspca_dev->dev,
usb_sndctrlpipe(gspca_dev->dev, 0),
0, /* request */
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
0, index, gspca_dev->usb_buf, 1,
500);
+ if (ret < 0) {
+ PDEBUG(D_ERR, "reg_w_page(): "
+ "Failed to write register to index 0x%x, "
+ "value 0x%x, error %i",
+ index, page[index], ret);
+ break;
+ }
}
+ return ret;
}
/* output a variable sequence */
-static void reg_w_var(struct gspca_dev *gspca_dev,
- const __u8 *seq)
+static int reg_w_var(struct gspca_dev *gspca_dev,
+ const __u8 *seq,
+ const __u8 *page3, unsigned int page3_len,
+ const __u8 *page4, unsigned int page4_len)
{
int index, len;
+ int ret = 0;
for (;;) {
index = *seq++;
len = *seq++;
switch (len) {
- case 0:
- return;
- case 254:
- reg_w_page(gspca_dev, page4_7311, sizeof page4_7311);
+ case END_OF_SEQUENCE:
+ return ret;
+ case LOAD_PAGE4:
+ ret = reg_w_page(gspca_dev, page4, page4_len);
break;
- case 255:
- reg_w_page(gspca_dev, page3_7302, sizeof page3_7302);
+ case LOAD_PAGE3:
+ ret = reg_w_page(gspca_dev, page3, page3_len);
break;
default:
- if (len > 64) {
+ if (len > USB_BUF_SZ) {
PDEBUG(D_ERR|D_STREAM,
"Incorrect variable sequence");
- return;
+ return -EINVAL;
}
while (len > 0) {
if (len < 8) {
- reg_w_buf(gspca_dev, index, seq, len);
+ ret = reg_w_buf(gspca_dev,
+ index, seq, len);
+ if (ret < 0)
+ return ret;
seq += len;
break;
}
- reg_w_buf(gspca_dev, index, seq, 8);
+ ret = reg_w_buf(gspca_dev, index, seq, 8);
seq += 8;
index += 8;
len -= 8;
}
}
+ if (ret < 0)
+ return ret;
}
/* not reached */
}
-/* this function is called at probe time */
+/* this function is called at probe time for pac7311 */
static int sd_config(struct gspca_dev *gspca_dev,
const struct usb_device_id *id)
{
@@ -499,22 +398,11 @@
cam = &gspca_dev->cam;
- sd->sensor = id->driver_info;
- if (sd->sensor == SENSOR_PAC7302) {
- PDEBUG(D_CONF, "Find Sensor PAC7302");
- cam->cam_mode = &vga_mode[2]; /* only 640x480 */
- cam->nmodes = 1;
- } else {
- PDEBUG(D_CONF, "Find Sensor PAC7311");
- cam->cam_mode = vga_mode;
- cam->nmodes = ARRAY_SIZE(vga_mode);
- gspca_dev->ctrl_dis = (1 << BRIGHTNESS_IDX)
- | (1 << SATURATION_IDX);
- }
+ PDEBUG(D_CONF, "Find Sensor PAC7311");
+ cam->cam_mode = vga_mode;
+ cam->nmodes = ARRAY_SIZE(vga_mode);
- sd->brightness = BRIGHTNESS_DEF;
sd->contrast = CONTRAST_DEF;
- sd->colors = COLOR_DEF;
sd->gain = GAIN_DEF;
sd->exposure = EXPOSURE_DEF;
sd->autogain = AUTOGAIN_DEF;
@@ -523,91 +411,47 @@
return 0;
}
-/* This function is used by pac7302 only */
-static void setbrightcont(struct gspca_dev *gspca_dev)
-{
- struct sd *sd = (struct sd *) gspca_dev;
- int i, v;
- static const __u8 max[10] =
- {0x29, 0x33, 0x42, 0x5a, 0x6e, 0x80, 0x9f, 0xbb,
- 0xd4, 0xec};
- static const __u8 delta[10] =
- {0x35, 0x33, 0x33, 0x2f, 0x2a, 0x25, 0x1e, 0x17,
- 0x11, 0x0b};
-
- reg_w(gspca_dev, 0xff, 0x00); /* page 0 */
- for (i = 0; i < 10; i++) {
- v = max[i];
- v += (sd->brightness - BRIGHTNESS_MAX)
- * 150 / BRIGHTNESS_MAX; /* 200 ? */
- v -= delta[i] * sd->contrast / CONTRAST_MAX;
- if (v < 0)
- v = 0;
- else if (v > 0xff)
- v = 0xff;
- reg_w(gspca_dev, 0xa2 + i, v);
- }
- reg_w(gspca_dev, 0xdc, 0x01);
-}
-
/* This function is used by pac7311 only */
-static void setcontrast(struct gspca_dev *gspca_dev)
+static int setcontrast(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
+ int ret;
- reg_w(gspca_dev, 0xff, 0x04);
- reg_w(gspca_dev, 0x10, sd->contrast >> 4);
+ ret = reg_w(gspca_dev, 0xff, 0x04);
+ if (0 <= ret)
+ ret = reg_w(gspca_dev, 0x10, sd->contrast >> 4);
/* load registers to sensor (Bit 0, auto clear) */
- reg_w(gspca_dev, 0x11, 0x01);
+ if (0 <= ret)
+ ret = reg_w(gspca_dev, 0x11, 0x01);
+ return ret;
}
-/* This function is used by pac7302 only */
-static void setcolors(struct gspca_dev *gspca_dev)
+static int setgain(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
- int i, v;
- static const int a[9] =
- {217, -212, 0, -101, 170, -67, -38, -315, 355};
- static const int b[9] =
- {19, 106, 0, 19, 106, 1, 19, 106, 1};
+ int gain = GAIN_MAX - sd->gain;
+ int ret;
- reg_w(gspca_dev, 0xff, 0x03); /* page 3 */
- reg_w(gspca_dev, 0x11, 0x01);
- reg_w(gspca_dev, 0xff, 0x00); /* page 0 */
- reg_w(gspca_dev, 0xff, 0x00); /* page 0 */
- for (i = 0; i < 9; i++) {
- v = a[i] * sd->colors / COLOR_MAX + b[i];
- reg_w(gspca_dev, 0x0f + 2 * i, (v >> 8) & 0x07);
- reg_w(gspca_dev, 0x0f + 2 * i + 1, v);
- }
- reg_w(gspca_dev, 0xdc, 0x01);
- PDEBUG(D_CONF|D_STREAM, "color: %i", sd->colors);
-}
+ if (gain < 1)
+ gain = 1;
+ else if (gain > 245)
+ gain = 245;
+ ret = reg_w(gspca_dev, 0xff, 0x04); /* page 4 */
+ if (0 <= ret)
+ ret = reg_w(gspca_dev, 0x0e, 0x00);
+ if (0 <= ret)
+ ret = reg_w(gspca_dev, 0x0f, gain);
-static void setgain(struct gspca_dev *gspca_dev)
-{
- struct sd *sd = (struct sd *) gspca_dev;
-
- if (sd->sensor == SENSOR_PAC7302) {
- reg_w(gspca_dev, 0xff, 0x03); /* page 3 */
- reg_w(gspca_dev, 0x10, sd->gain >> 3);
- } else {
- int gain = GAIN_MAX - sd->gain;
- if (gain < 1)
- gain = 1;
- else if (gain > 245)
- gain = 245;
- reg_w(gspca_dev, 0xff, 0x04); /* page 4 */
- reg_w(gspca_dev, 0x0e, 0x00);
- reg_w(gspca_dev, 0x0f, gain);
- }
/* load registers to sensor (Bit 0, auto clear) */
- reg_w(gspca_dev, 0x11, 0x01);
+ if (0 <= ret)
+ ret = reg_w(gspca_dev, 0x11, 0x01);
+ return ret;
}
-static void setexposure(struct gspca_dev *gspca_dev)
+static int setexposure(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
+ int ret;
__u8 reg;
/* register 2 of frame 3/4 contains the clock divider configuring the
@@ -619,97 +463,94 @@
else if (reg > 63)
reg = 63;
- if (sd->sensor == SENSOR_PAC7302) {
- /* On the pac7302 reg2 MUST be a multiple of 3, so round it to
- the nearest multiple of 3, except when between 6 and 12? */
- if (reg < 6 || reg > 12)
- reg = ((reg + 1) / 3) * 3;
- reg_w(gspca_dev, 0xff, 0x03); /* page 3 */
- reg_w(gspca_dev, 0x02, reg);
+ ret = reg_w(gspca_dev, 0xff, 0x04); /* page 4 */
+ if (0 <= ret)
+ ret = reg_w(gspca_dev, 0x02, reg);
+ /* Page 1 register 8 must always be 0x08 except when not in
+ 640x480 mode and Page3/4 reg 2 <= 3 then it must be 9 */
+ if (0 <= ret)
+ ret = reg_w(gspca_dev, 0xff, 0x01);
+ if (gspca_dev->cam.cam_mode[(int)gspca_dev->curr_mode].priv &&
+ reg <= 3) {
+ if (0 <= ret)
+ ret = reg_w(gspca_dev, 0x08, 0x09);
} else {
- reg_w(gspca_dev, 0xff, 0x04); /* page 4 */
- reg_w(gspca_dev, 0x02, reg);
- /* Page 1 register 8 must always be 0x08 except when not in
- 640x480 mode and Page3/4 reg 2 <= 3 then it must be 9 */
- reg_w(gspca_dev, 0xff, 0x01);
- if (gspca_dev->cam.cam_mode[(int)gspca_dev->curr_mode].priv &&
- reg <= 3)
- reg_w(gspca_dev, 0x08, 0x09);
- else
- reg_w(gspca_dev, 0x08, 0x08);
+ if (0 <= ret)
+ ret = reg_w(gspca_dev, 0x08, 0x08);
}
+
/* load registers to sensor (Bit 0, auto clear) */
- reg_w(gspca_dev, 0x11, 0x01);
+ if (0 <= ret)
+ ret = reg_w(gspca_dev, 0x11, 0x01);
+ return ret;
}
-static void sethvflip(struct gspca_dev *gspca_dev)
+static int sethvflip(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
+ int ret;
__u8 data;
- if (sd->sensor == SENSOR_PAC7302) {
- reg_w(gspca_dev, 0xff, 0x03); /* page 3 */
- data = (sd->hflip ? 0x08 : 0x00)
- | (sd->vflip ? 0x04 : 0x00);
- } else {
- reg_w(gspca_dev, 0xff, 0x04); /* page 4 */
- data = (sd->hflip ? 0x04 : 0x00)
- | (sd->vflip ? 0x08 : 0x00);
- }
- reg_w(gspca_dev, 0x21, data);
+ ret = reg_w(gspca_dev, 0xff, 0x04); /* page 4 */
+ data = (sd->hflip ? 0x04 : 0x00) | (sd->vflip ? 0x08 : 0x00);
+ if (0 <= ret)
+ ret = reg_w(gspca_dev, 0x21, data);
/* load registers to sensor (Bit 0, auto clear) */
- reg_w(gspca_dev, 0x11, 0x01);
+ if (0 <= ret)
+ ret = reg_w(gspca_dev, 0x11, 0x01);
+ return ret;
}
-/* this function is called at probe and resume time */
+/* this function is called at probe and resume time for pac7311 */
static int sd_init(struct gspca_dev *gspca_dev)
{
- struct sd *sd = (struct sd *) gspca_dev;
-
- if (sd->sensor == SENSOR_PAC7302)
- reg_w_seq(gspca_dev, init_7302, sizeof init_7302);
- else
- reg_w_seq(gspca_dev, init_7311, sizeof init_7311);
-
- return 0;
+ return reg_w_seq(gspca_dev, init_7311, sizeof(init_7311)/2);
}
static int sd_start(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
+ int ret;
sd->sof_read = 0;
- if (sd->sensor == SENSOR_PAC7302) {
- reg_w_var(gspca_dev, start_7302);
- setbrightcont(gspca_dev);
- setcolors(gspca_dev);
- } else {
- reg_w_var(gspca_dev, start_7311);
- setcontrast(gspca_dev);
- }
- setgain(gspca_dev);
- setexposure(gspca_dev);
- sethvflip(gspca_dev);
+ ret = reg_w_var(gspca_dev, start_7311,
+ NULL, 0,
+ page4_7311, sizeof(page4_7311));
+ if (0 <= ret)
+ ret = setcontrast(gspca_dev);
+ if (0 <= ret)
+ ret = setgain(gspca_dev);
+ if (0 <= ret)
+ ret = setexposure(gspca_dev);
+ if (0 <= ret)
+ ret = sethvflip(gspca_dev);
/* set correct resolution */
switch (gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv) {
case 2: /* 160x120 pac7311 */
- reg_w(gspca_dev, 0xff, 0x01);
- reg_w(gspca_dev, 0x17, 0x20);
- reg_w(gspca_dev, 0x87, 0x10);
+ if (0 <= ret)
+ ret = reg_w(gspca_dev, 0xff, 0x01);
+ if (0 <= ret)
+ ret = reg_w(gspca_dev, 0x17, 0x20);
+ if (0 <= ret)
+ ret = reg_w(gspca_dev, 0x87, 0x10);
break;
case 1: /* 320x240 pac7311 */
- reg_w(gspca_dev, 0xff, 0x01);
- reg_w(gspca_dev, 0x17, 0x30);
- reg_w(gspca_dev, 0x87, 0x11);
+ if (0 <= ret)
+ ret = reg_w(gspca_dev, 0xff, 0x01);
+ if (0 <= ret)
+ ret = reg_w(gspca_dev, 0x17, 0x30);
+ if (0 <= ret)
+ ret = reg_w(gspca_dev, 0x87, 0x11);
break;
case 0: /* 640x480 */
- if (sd->sensor == SENSOR_PAC7302)
- break;
- reg_w(gspca_dev, 0xff, 0x01);
- reg_w(gspca_dev, 0x17, 0x00);
- reg_w(gspca_dev, 0x87, 0x12);
+ if (0 <= ret)
+ ret = reg_w(gspca_dev, 0xff, 0x01);
+ if (0 <= ret)
+ ret = reg_w(gspca_dev, 0x17, 0x00);
+ if (0 <= ret)
+ ret = reg_w(gspca_dev, 0x87, 0x12);
break;
}
@@ -718,47 +559,42 @@
atomic_set(&sd->avg_lum, -1);
/* start stream */
- reg_w(gspca_dev, 0xff, 0x01);
- if (sd->sensor == SENSOR_PAC7302)
- reg_w(gspca_dev, 0x78, 0x01);
- else
- reg_w(gspca_dev, 0x78, 0x05);
- return 0;
+ if (0 <= ret)
+ ret = reg_w(gspca_dev, 0xff, 0x01);
+ if (0 <= ret)
+ ret = reg_w(gspca_dev, 0x78, 0x05);
+
+ return ret;
}
static void sd_stopN(struct gspca_dev *gspca_dev)
{
- struct sd *sd = (struct sd *) gspca_dev;
+ int ret;
- if (sd->sensor == SENSOR_PAC7302) {
- reg_w(gspca_dev, 0xff, 0x01);
- reg_w(gspca_dev, 0x78, 0x00);
- reg_w(gspca_dev, 0x78, 0x00);
- return;
- }
- reg_w(gspca_dev, 0xff, 0x04);
- reg_w(gspca_dev, 0x27, 0x80);
- reg_w(gspca_dev, 0x28, 0xca);
- reg_w(gspca_dev, 0x29, 0x53);
- reg_w(gspca_dev, 0x2a, 0x0e);
- reg_w(gspca_dev, 0xff, 0x01);
- reg_w(gspca_dev, 0x3e, 0x20);
- reg_w(gspca_dev, 0x78, 0x44); /* Bit_0=start stream, Bit_6=LED */
- reg_w(gspca_dev, 0x78, 0x44); /* Bit_0=start stream, Bit_6=LED */
- reg_w(gspca_dev, 0x78, 0x44); /* Bit_0=start stream, Bit_6=LED */
+ ret = reg_w(gspca_dev, 0xff, 0x04);
+ if (0 <= ret)
+ ret = reg_w(gspca_dev, 0x27, 0x80);
+ if (0 <= ret)
+ ret = reg_w(gspca_dev, 0x28, 0xca);
+ if (0 <= ret)
+ ret = reg_w(gspca_dev, 0x29, 0x53);
+ if (0 <= ret)
+ ret = reg_w(gspca_dev, 0x2a, 0x0e);
+ if (0 <= ret)
+ ret = reg_w(gspca_dev, 0xff, 0x01);
+ if (0 <= ret)
+ ret = reg_w(gspca_dev, 0x3e, 0x20);
+ if (0 <= ret)
+ ret = reg_w(gspca_dev, 0x78, 0x44); /* Bit_0=start stream, Bit_6=LED */
+ if (0 <= ret)
+ ret = reg_w(gspca_dev, 0x78, 0x44); /* Bit_0=start stream, Bit_6=LED */
+ if (0 <= ret)
+ ret = reg_w(gspca_dev, 0x78, 0x44); /* Bit_0=start stream, Bit_6=LED */
}
-/* called on streamoff with alt 0 and on disconnect */
+/* called on streamoff with alt 0 and on disconnect for 7311 */
static void sd_stop0(struct gspca_dev *gspca_dev)
{
- struct sd *sd = (struct sd *) gspca_dev;
-
- if (!gspca_dev->present)
- return;
- if (sd->sensor == SENSOR_PAC7302) {
- reg_w(gspca_dev, 0xff, 0x01);
- reg_w(gspca_dev, 0x78, 0x40);
- }
}
/* Include pac common sof detection functions */
@@ -773,22 +609,8 @@
if (avg_lum == -1)
return;
- if (sd->sensor == SENSOR_PAC7302) {
- desired_lum = 270 + sd->brightness * 4;
- /* Hack hack, with the 7202 the first exposure step is
- pretty large, so if we're about to make the first
- exposure increase make the deadzone large to avoid
- oscilating */
- if (desired_lum > avg_lum && sd->gain == GAIN_DEF &&
- sd->exposure > EXPOSURE_DEF &&
- sd->exposure < 42)
- deadzone = 90;
- else
- deadzone = 30;
- } else {
- desired_lum = 200;
- deadzone = 20;
- }
+ desired_lum = 200;
+ deadzone = 20;
if (sd->autogain_ignore_frames > 0)
sd->autogain_ignore_frames--;
@@ -797,53 +619,92 @@
sd->autogain_ignore_frames = PAC_AUTOGAIN_IGNORE_FRAMES;
}
-static const unsigned char pac7311_jpeg_header1[] = {
- 0xff, 0xd8, 0xff, 0xc0, 0x00, 0x11, 0x08
+/* JPEG header, part 1 */
+static const unsigned char pac_jpeg_header1[] = {
+ 0xff, 0xd8, /* SOI: Start of Image */
+
+ 0xff, 0xc0, /* SOF0: Start of Frame (Baseline DCT) */
+ 0x00, 0x11, /* length = 17 bytes (including this length field) */
+ 0x08 /* Precision: 8 */
+ /* 2 bytes is placed here: number of image lines */
+ /* 2 bytes is placed here: samples per line */
};
-static const unsigned char pac7311_jpeg_header2[] = {
- 0x03, 0x01, 0x21, 0x00, 0x02, 0x11, 0x01, 0x03, 0x11, 0x01, 0xff, 0xda,
- 0x00, 0x0c, 0x03, 0x01, 0x00, 0x02, 0x11, 0x03, 0x11, 0x00, 0x3f, 0x00
+/* JPEG header, continued */
+static const unsigned char pac_jpeg_header2[] = {
+ 0x03, /* Number of image components: 3 */
+ 0x01, 0x21, 0x00, /* ID=1, Subsampling 1x1, Quantization table: 0 */
+ 0x02, 0x11, 0x01, /* ID=2, Subsampling 2x1, Quantization table: 1 */
+ 0x03, 0x11, 0x01, /* ID=3, Subsampling 2x1, Quantization table: 1 */
+
+ 0xff, 0xda, /* SOS: Start Of Scan */
+ 0x00, 0x0c, /* length = 12 bytes (including this length field) */
+ 0x03, /* number of components: 3 */
+ 0x01, 0x00, /* selector 1, table 0x00 */
+ 0x02, 0x11, /* selector 2, table 0x11 */
+ 0x03, 0x11, /* selector 3, table 0x11 */
+ 0x00, 0x3f, /* Spectral selection: 0 .. 63 */
+ 0x00 /* Successive approximation: 0 */
};
+static void pac_start_frame(struct gspca_dev *gspca_dev,
+ struct gspca_frame *frame,
+ __u16 lines, __u16 samples_per_line)
+{
+ unsigned char tmpbuf[4];
+
+ gspca_frame_add(gspca_dev, FIRST_PACKET,
+ pac_jpeg_header1, sizeof(pac_jpeg_header1));
+
+ tmpbuf[0] = lines >> 8;
+ tmpbuf[1] = lines & 0xff;
+ tmpbuf[2] = samples_per_line >> 8;
+ tmpbuf[3] = samples_per_line & 0xff;
+
+ gspca_frame_add(gspca_dev, INTER_PACKET,
+ tmpbuf, sizeof(tmpbuf));
+ gspca_frame_add(gspca_dev, INTER_PACKET,
+ pac_jpeg_header2, sizeof(pac_jpeg_header2));
+}
+
/* this function is run at interrupt level */
static void sd_pkt_scan(struct gspca_dev *gspca_dev,
- struct gspca_frame *frame, /* target */
- __u8 *data, /* isoc packet */
+ u8 *data, /* isoc packet */
int len) /* iso packet length */
{
struct sd *sd = (struct sd *) gspca_dev;
unsigned char *sof;
+ struct gspca_frame *frame;
- sof = pac_find_sof(gspca_dev, data, len);
+ sof = pac_find_sof(&sd->sof_read, data, len);
if (sof) {
- unsigned char tmpbuf[4];
int n, lum_offset, footer_length;
- if (sd->sensor == SENSOR_PAC7302) {
- /* 6 bytes after the FF D9 EOF marker a number of lumination
- bytes are send corresponding to different parts of the
- image, the 14th and 15th byte after the EOF seem to
- correspond to the center of the image */
- lum_offset = 61 + sizeof pac_sof_marker;
- footer_length = 74;
- } else {
- lum_offset = 24 + sizeof pac_sof_marker;
- footer_length = 26;
+ frame = gspca_get_i_frame(gspca_dev);
+ if (frame == NULL) {
+ gspca_dev->last_packet_type = DISCARD_PACKET;
+ return;
}
+ /* 6 bytes after the FF D9 EOF marker a number of lumination
+ bytes are send corresponding to different parts of the
+ image, the 14th and 15th byte after the EOF seem to
+ correspond to the center of the image */
+ lum_offset = 24 + sizeof pac_sof_marker;
+ footer_length = 26;
+
/* Finish decoding current frame */
n = (sof - data) - (footer_length + sizeof pac_sof_marker);
if (n < 0) {
frame->data_end += n;
n = 0;
}
- frame = gspca_frame_add(gspca_dev, INTER_PACKET, frame,
+ gspca_frame_add(gspca_dev, INTER_PACKET,
data, n);
if (gspca_dev->last_packet_type != DISCARD_PACKET &&
frame->data_end[-2] == 0xff &&
frame->data_end[-1] == 0xd9)
- frame = gspca_frame_add(gspca_dev, LAST_PACKET, frame,
+ gspca_frame_add(gspca_dev, LAST_PACKET,
NULL, 0);
n = sof - data;
@@ -859,43 +720,10 @@
atomic_set(&sd->avg_lum, -1);
/* Start the new frame with the jpeg header */
- gspca_frame_add(gspca_dev, FIRST_PACKET, frame,
- pac7311_jpeg_header1, sizeof(pac7311_jpeg_header1));
- if (sd->sensor == SENSOR_PAC7302) {
- /* The PAC7302 has the image rotated 90 degrees */
- tmpbuf[0] = gspca_dev->width >> 8;
- tmpbuf[1] = gspca_dev->width & 0xff;
- tmpbuf[2] = gspca_dev->height >> 8;
- tmpbuf[3] = gspca_dev->height & 0xff;
- } else {
- tmpbuf[0] = gspca_dev->height >> 8;
- tmpbuf[1] = gspca_dev->height & 0xff;
- tmpbuf[2] = gspca_dev->width >> 8;
- tmpbuf[3] = gspca_dev->width & 0xff;
- }
- gspca_frame_add(gspca_dev, INTER_PACKET, frame, tmpbuf, 4);
- gspca_frame_add(gspca_dev, INTER_PACKET, frame,
- pac7311_jpeg_header2, sizeof(pac7311_jpeg_header2));
+ pac_start_frame(gspca_dev, frame,
+ gspca_dev->height, gspca_dev->width);
}
- gspca_frame_add(gspca_dev, INTER_PACKET, frame, data, len);
-}
-
-static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val)
-{
- struct sd *sd = (struct sd *) gspca_dev;
-
- sd->brightness = val;
- if (gspca_dev->streaming)
- setbrightcont(gspca_dev);
- return 0;
-}
-
-static int sd_getbrightness(struct gspca_dev *gspca_dev, __s32 *val)
-{
- struct sd *sd = (struct sd *) gspca_dev;
-
- *val = sd->brightness;
- return 0;
+ gspca_frame_add(gspca_dev, INTER_PACKET, data, len);
}
static int sd_setcontrast(struct gspca_dev *gspca_dev, __s32 val)
@@ -904,10 +732,7 @@
sd->contrast = val;
if (gspca_dev->streaming) {
- if (sd->sensor == SENSOR_PAC7302)
- setbrightcont(gspca_dev);
- else
- setcontrast(gspca_dev);
+ setcontrast(gspca_dev);
}
return 0;
}
@@ -920,24 +745,6 @@
return 0;
}
-static int sd_setcolors(struct gspca_dev *gspca_dev, __s32 val)
-{
- struct sd *sd = (struct sd *) gspca_dev;
-
- sd->colors = val;
- if (gspca_dev->streaming)
- setcolors(gspca_dev);
- return 0;
-}
-
-static int sd_getcolors(struct gspca_dev *gspca_dev, __s32 *val)
-{
- struct sd *sd = (struct sd *) gspca_dev;
-
- *val = sd->colors;
- return 0;
-}
-
static int sd_setgain(struct gspca_dev *gspca_dev, __s32 val)
{
struct sd *sd = (struct sd *) gspca_dev;
@@ -1041,7 +848,7 @@
return 0;
}
-/* sub-driver description */
+/* sub-driver description for pac7311 */
static struct sd_desc sd_desc = {
.name = MODULE_NAME,
.ctrls = sd_ctrls,
@@ -1057,21 +864,12 @@
/* -- module initialisation -- */
static __devinitdata struct usb_device_id device_table[] = {
- {USB_DEVICE(0x06f8, 0x3009), .driver_info = SENSOR_PAC7302},
- {USB_DEVICE(0x093a, 0x2600), .driver_info = SENSOR_PAC7311},
- {USB_DEVICE(0x093a, 0x2601), .driver_info = SENSOR_PAC7311},
- {USB_DEVICE(0x093a, 0x2603), .driver_info = SENSOR_PAC7311},
- {USB_DEVICE(0x093a, 0x2608), .driver_info = SENSOR_PAC7311},
- {USB_DEVICE(0x093a, 0x260e), .driver_info = SENSOR_PAC7311},
- {USB_DEVICE(0x093a, 0x260f), .driver_info = SENSOR_PAC7311},
- {USB_DEVICE(0x093a, 0x2620), .driver_info = SENSOR_PAC7302},
- {USB_DEVICE(0x093a, 0x2621), .driver_info = SENSOR_PAC7302},
- {USB_DEVICE(0x093a, 0x2622), .driver_info = SENSOR_PAC7302},
- {USB_DEVICE(0x093a, 0x2624), .driver_info = SENSOR_PAC7302},
- {USB_DEVICE(0x093a, 0x2626), .driver_info = SENSOR_PAC7302},
- {USB_DEVICE(0x093a, 0x2629), .driver_info = SENSOR_PAC7302},
- {USB_DEVICE(0x093a, 0x262a), .driver_info = SENSOR_PAC7302},
- {USB_DEVICE(0x093a, 0x262c), .driver_info = SENSOR_PAC7302},
+ {USB_DEVICE(0x093a, 0x2600)},
+ {USB_DEVICE(0x093a, 0x2601)},
+ {USB_DEVICE(0x093a, 0x2603)},
+ {USB_DEVICE(0x093a, 0x2608)},
+ {USB_DEVICE(0x093a, 0x260e)},
+ {USB_DEVICE(0x093a, 0x260f)},
{}
};
MODULE_DEVICE_TABLE(usb, device_table);
diff --git a/drivers/media/video/gspca/pac_common.h b/drivers/media/video/gspca/pac_common.h
index 34d4b14..20f67d9 100644
--- a/drivers/media/video/gspca/pac_common.h
+++ b/drivers/media/video/gspca/pac_common.h
@@ -33,26 +33,101 @@
static const unsigned char pac_sof_marker[5] =
{ 0xff, 0xff, 0x00, 0xff, 0x96 };
-static unsigned char *pac_find_sof(struct gspca_dev *gspca_dev,
+/*
+ The following state machine finds the SOF marker sequence
+ 0xff, 0xff, 0x00, 0xff, 0x96 in a byte stream.
+
+ +----------+
+ | 0: START |<---------------\
+ +----------+<-\ |
+ | \---/otherwise |
+ v 0xff |
+ +----------+ otherwise |
+ | 1 |--------------->*
+ | | ^
+ +----------+ |
+ | |
+ v 0xff |
+ +----------+<-\0xff |
+ /->| |--/ |
+ | | 2 |--------------->*
+ | | | otherwise ^
+ | +----------+ |
+ | | |
+ | v 0x00 |
+ | +----------+ |
+ | | 3 | |
+ | | |--------------->*
+ | +----------+ otherwise ^
+ | | |
+ 0xff | v 0xff |
+ | +----------+ |
+ \--| 4 | |
+ | |----------------/
+ +----------+ otherwise
+ |
+ v 0x96
+ +----------+
+ | FOUND |
+ +----------+
+*/
+
+static unsigned char *pac_find_sof(u8 *sof_read,
unsigned char *m, int len)
{
- struct sd *sd = (struct sd *) gspca_dev;
int i;
/* Search for the SOF marker (fixed part) in the header */
for (i = 0; i < len; i++) {
- if (m[i] == pac_sof_marker[sd->sof_read]) {
- sd->sof_read++;
- if (sd->sof_read == sizeof(pac_sof_marker)) {
+ switch (*sof_read) {
+ case 0:
+ if (m[i] == 0xff)
+ *sof_read = 1;
+ break;
+ case 1:
+ if (m[i] == 0xff)
+ *sof_read = 2;
+ else
+ *sof_read = 0;
+ break;
+ case 2:
+ switch (m[i]) {
+ case 0x00:
+ *sof_read = 3;
+ break;
+ case 0xff:
+ /* stay in this state */
+ break;
+ default:
+ *sof_read = 0;
+ }
+ break;
+ case 3:
+ if (m[i] == 0xff)
+ *sof_read = 4;
+ else
+ *sof_read = 0;
+ break;
+ case 4:
+ switch (m[i]) {
+ case 0x96:
+ /* Pattern found */
PDEBUG(D_FRAM,
"SOF found, bytes to analyze: %u."
" Frame starts at byte #%u",
len, i + 1);
- sd->sof_read = 0;
+ *sof_read = 0;
return m + i + 1;
+ break;
+ case 0xff:
+ *sof_read = 2;
+ break;
+ default:
+ *sof_read = 0;
}
- } else {
- sd->sof_read = 0;
+ break;
+ default:
+ *sof_read = 0;
}
}
diff --git a/drivers/media/video/gspca/sn9c20x.c b/drivers/media/video/gspca/sn9c20x.c
index cdad3db..b1944a7 100644
--- a/drivers/media/video/gspca/sn9c20x.c
+++ b/drivers/media/video/gspca/sn9c20x.c
@@ -2342,7 +2342,6 @@
}
static void sd_pkt_scan(struct gspca_dev *gspca_dev,
- struct gspca_frame *frame, /* target */
u8 *data, /* isoc packet */
int len) /* iso packet length */
{
@@ -2378,22 +2377,22 @@
avg_lum >>= 9;
atomic_set(&sd->avg_lum, avg_lum);
gspca_frame_add(gspca_dev, LAST_PACKET,
- frame, data, len);
+ data, len);
return;
}
if (gspca_dev->last_packet_type == LAST_PACKET) {
if (gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv
& MODE_JPEG) {
- gspca_frame_add(gspca_dev, FIRST_PACKET, frame,
+ gspca_frame_add(gspca_dev, FIRST_PACKET,
sd->jpeg_hdr, JPEG_HDR_SZ);
- gspca_frame_add(gspca_dev, INTER_PACKET, frame,
+ gspca_frame_add(gspca_dev, INTER_PACKET,
data, len);
} else {
- gspca_frame_add(gspca_dev, FIRST_PACKET, frame,
+ gspca_frame_add(gspca_dev, FIRST_PACKET,
data, len);
}
} else {
- gspca_frame_add(gspca_dev, INTER_PACKET, frame, data, len);
+ gspca_frame_add(gspca_dev, INTER_PACKET, data, len);
}
}
diff --git a/drivers/media/video/gspca/sonixb.c b/drivers/media/video/gspca/sonixb.c
index cf3af8d..5be95bc 100644
--- a/drivers/media/video/gspca/sonixb.c
+++ b/drivers/media/video/gspca/sonixb.c
@@ -304,7 +304,7 @@
};
static const __u8 ov6650_sensor_init[][8] =
{
- /* Bright, contrast, etc are set througth SCBB interface.
+ /* Bright, contrast, etc are set through SCBB interface.
* AVCAP on win2 do not send any data on this controls. */
/* Anyway, some registers appears to alter bright and constrat */
@@ -995,8 +995,7 @@
}
static void sd_pkt_scan(struct gspca_dev *gspca_dev,
- struct gspca_frame *frame, /* target */
- unsigned char *data, /* isoc packet */
+ u8 *data, /* isoc packet */
int len) /* iso packet length */
{
int i;
@@ -1054,12 +1053,12 @@
pkt_type = DISCARD_PACKET;
}
- frame = gspca_frame_add(gspca_dev, pkt_type,
- frame, data, 0);
+ gspca_frame_add(gspca_dev, pkt_type,
+ NULL, 0);
data += i + fr_h_sz;
len -= i + fr_h_sz;
gspca_frame_add(gspca_dev, FIRST_PACKET,
- frame, data, len);
+ data, len);
return;
}
}
@@ -1068,15 +1067,21 @@
if (cam->cam_mode[gspca_dev->curr_mode].priv & MODE_RAW) {
/* In raw mode we sometimes get some garbage after the frame
ignore this */
- int used = frame->data_end - frame->data;
+ struct gspca_frame *frame;
+ int used;
int size = cam->cam_mode[gspca_dev->curr_mode].sizeimage;
+ frame = gspca_get_i_frame(gspca_dev);
+ if (frame == NULL) {
+ gspca_dev->last_packet_type = DISCARD_PACKET;
+ return;
+ }
+ used = frame->data_end - frame->data;
if (used + len > size)
len = size - used;
}
- gspca_frame_add(gspca_dev, INTER_PACKET,
- frame, data, len);
+ gspca_frame_add(gspca_dev, INTER_PACKET, data, len);
}
static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val)
diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c
index 33f4d0a..0bd36a0 100644
--- a/drivers/media/video/gspca/sonixj.c
+++ b/drivers/media/video/gspca/sonixj.c
@@ -1,8 +1,8 @@
/*
- * Sonix sn9c102p sn9c105 sn9c120 (jpeg) library
- * Copyright (C) 2005 Michel Xhaard mxhaard@magic.fr
+ * Sonix sn9c102p sn9c105 sn9c120 (jpeg) subdriver
*
- * V4L2 by Jean-Francois Moine <http://moinejf.free.fr>
+ * Copyright (C) 2009 Jean-Francois Moine <http://moinejf.free.fr>
+ * Copyright (C) 2005 Michel Xhaard mxhaard@magic.fr
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -72,8 +72,9 @@
#define SENSOR_OV7630 5
#define SENSOR_OV7648 6
#define SENSOR_OV7660 7
-#define SENSOR_SP80708 8
- u8 i2c_base;
+#define SENSOR_PO1030 8
+#define SENSOR_SP80708 9
+ u8 i2c_addr;
u8 *jpeg_hdr;
};
@@ -250,7 +251,7 @@
.minimum = 0,
.maximum = 2, /* 0: 0, 1: 50Hz, 2:60Hz */
.step = 1,
-#define FREQ_DEF 2
+#define FREQ_DEF 1
.default_value = FREQ_DEF,
},
.set = sd_setfreq,
@@ -277,7 +278,9 @@
(1 << AUTOGAIN_IDX) | (1 << INFRARED_IDX) | (1 << VFLIP_IDX),
/* SENSOR_OV7660 7 */
(1 << AUTOGAIN_IDX) | (1 << INFRARED_IDX) | (1 << VFLIP_IDX) |
- (1 << FREQ_IDX), /* SENSOR_SP80708 8 */
+ (1 << FREQ_IDX), /* SENSOR_PO1030 8 */
+ (1 << AUTOGAIN_IDX) | (1 << INFRARED_IDX) | (1 << VFLIP_IDX) |
+ (1 << FREQ_IDX), /* SENSOR_SP80708 9 */
};
static const struct v4l2_pix_format vga_mode[] = {
@@ -304,7 +307,7 @@
/* reg0 reg1 reg2 reg3 reg4 reg5 reg6 reg7 */
0x00, 0x03, 0x64, 0x00, 0x1a, 0x20, 0x20, 0x20,
/* reg8 reg9 rega regb regc regd rege regf */
- 0xa1, 0x11, 0x02, 0x09, 0x00, 0x00, 0x00, 0x10,
+ 0x81, 0x11, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
/* reg10 reg11 reg12 reg13 reg14 reg15 reg16 reg17 */
0x03, 0x00, 0x00, 0x01, 0x03, 0x28, 0x1e, 0x41,
/* reg18 reg19 reg1a reg1b */
@@ -315,7 +318,7 @@
/* reg0 reg1 reg2 reg3 reg4 reg5 reg6 reg7 */
0x00, 0x61, 0x44, 0x00, 0x1a, 0x20, 0x20, 0x20,
/* reg8 reg9 rega regb regc regd rege regf */
- 0xb1, 0x5d, 0x07, 0x00, 0x00, 0x00, 0x00, 0x10,
+ 0x81, 0x5d, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
/* reg10 reg11 reg12 reg13 reg14 reg15 reg16 reg17 */
0x03, 0x00, 0x00, 0x02, 0x0a, 0x28, 0x1e, 0x61,
/* reg18 reg19 reg1a reg1b */
@@ -337,7 +340,7 @@
/* reg0 reg1 reg2 reg3 reg4 reg5 reg6 reg7 */
0x00, 0x61, 0x40, 0x00, 0x1a, 0x20, 0x20, 0x20,
/* reg8 reg9 rega regb regc regd rege regf */
- 0x81, 0x5c, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x81, 0x5c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
/* reg10 reg11 reg12 reg13 reg14 reg15 reg16 reg17 */
0x03, 0x00, 0x00, 0x02, 0x1c, 0x28, 0x1e, 0x40,
/* reg18 reg19 reg1a reg1b */
@@ -346,7 +349,7 @@
static const u8 sn_om6802[0x1c] = {
/* reg0 reg1 reg2 reg3 reg4 reg5 reg6 reg7 */
- 0x00, 0x23, 0x72, 0x00, 0x1a, 0x34, 0x27, 0x20,
+ 0x00, 0x23, 0x72, 0x00, 0x1a, 0x20, 0x20, 0x19,
/* reg8 reg9 rega regb regc regd rege regf */
0x80, 0x34, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
/* reg10 reg11 reg12 reg13 reg14 reg15 reg16 reg17 */
@@ -359,7 +362,7 @@
/* reg0 reg1 reg2 reg3 reg4 reg5 reg6 reg7 */
0x00, 0x21, 0x40, 0x00, 0x1a, 0x20, 0x1f, 0x20,
/* reg8 reg9 rega regb regc regd rege regf */
- 0xa1, 0x21, 0x76, 0x21, 0x00, 0x00, 0x00, 0x10,
+ 0x81, 0x21, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
/* reg10 reg11 reg12 reg13 reg14 reg15 reg16 reg17 */
0x03, 0x00, 0x04, 0x01, 0x0a, 0x28, 0x1e, 0xc2,
/* reg18 reg19 reg1a reg1b */
@@ -370,7 +373,7 @@
/* reg0 reg1 reg2 reg3 reg4 reg5 reg6 reg7 */
0x00, 0x63, 0x40, 0x00, 0x1a, 0x20, 0x20, 0x20,
/* reg8 reg9 rega regb regc regd rege regf */
- 0x81, 0x21, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10,
+ 0x81, 0x21, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
/* reg10 reg11 reg12 reg13 reg14 reg15 reg16 reg17 */
0x03, 0x00, 0x00, 0x01, 0x00, 0x28, 0x1e, 0x00,
/* reg18 reg19 reg1a reg1b */
@@ -388,11 +391,22 @@
0x07, 0x00, 0x00, 0x00
};
+static const u8 sn_po1030[0x1c] = {
+/* reg0 reg1 reg2 reg3 reg4 reg5 reg6 reg7 */
+ 0x00, 0x21, 0x62, 0x00, 0x1a, 0x20, 0x20, 0x20,
+/* reg8 reg9 rega regb regc regd rege regf */
+ 0x81, 0x6e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+/* reg10 reg11 reg12 reg13 reg14 reg15 reg16 reg17 */
+ 0x03, 0x00, 0x00, 0x06, 0x06, 0x28, 0x1e, 0x00,
+/* reg18 reg19 reg1a reg1b */
+ 0x07, 0x00, 0x00, 0x00
+};
+
static const u8 sn_sp80708[0x1c] = {
/* reg0 reg1 reg2 reg3 reg4 reg5 reg6 reg7 */
0x00, 0x63, 0x60, 0x00, 0x1a, 0x20, 0x20, 0x20,
/* reg8 reg9 rega regb regc regd rege regf */
- 0x81, 0x18, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x81, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
/* reg10 reg11 reg12 reg13 reg14 reg15 reg16 reg17 */
0x03, 0x00, 0x00, 0x03, 0x04, 0x28, 0x1e, 0x00,
/* reg18 reg19 reg1a reg1b */
@@ -409,6 +423,7 @@
sn_ov7630,
sn_ov7648,
sn_ov7660,
+ sn_po1030,
sn_sp80708
};
@@ -455,7 +470,7 @@
{0xa1, 0x11, 0x01, 0x08, 0x00, 0x00, 0x00, 0x10},
{0xa1, 0x11, 0x20, 0x00, 0x00, 0x00, 0x00, 0x10},
- {0xa1, 0x11, 0x21, 0xD0, 0x00, 0x00, 0x00, 0x10},
+ {0xa1, 0x11, 0x21, 0xd0, 0x00, 0x00, 0x00, 0x10},
{0xa1, 0x11, 0x22, 0x00, 0x00, 0x00, 0x00, 0x10},
{0xa1, 0x11, 0x23, 0x09, 0x00, 0x00, 0x00, 0x10},
@@ -464,6 +479,8 @@
{0xa1, 0x11, 0x21, 0xd0, 0x00, 0x00, 0x00, 0x10},
{0xa1, 0x11, 0x22, 0x00, 0x00, 0x00, 0x00, 0x10},
{0xa1, 0x11, 0x23, 0x10, 0x00, 0x00, 0x00, 0x10},
+ {0xa1, 0x11, 0x01, 0x18, 0x00, 0x00, 0x00, 0x10},
+ /* set sensor clock */
{}
};
static const u8 mi0360_sensor_init[][8] = {
@@ -545,7 +562,7 @@
};
static const u8 mt9v111_sensor_init[][8] = {
{0xb1, 0x5c, 0x0d, 0x00, 0x01, 0x00, 0x00, 0x10}, /* reset? */
- /* delay 20 ms */
+ {0xdd, 0x14, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, /* delay 20ms */
{0xb1, 0x5c, 0x0d, 0x00, 0x00, 0x00, 0x00, 0x10},
{0xb1, 0x5c, 0x01, 0x00, 0x01, 0x00, 0x00, 0x10}, /* IFP select */
{0xb1, 0x5c, 0x08, 0x04, 0x80, 0x00, 0x00, 0x10}, /* output fmt ctrl */
@@ -572,7 +589,9 @@
{0xb1, 0x5c, 0x1e, 0x00, 0x00, 0x00, 0x00, 0x10}, /* digital zoom */
{0xb1, 0x5c, 0x20, 0x00, 0x00, 0x00, 0x00, 0x10}, /* read mode */
{0xb1, 0x5c, 0x20, 0x00, 0x00, 0x00, 0x00, 0x10},
- /*******/
+ {}
+};
+static const u8 mt9v111_sensor_param1[][8] = {
{0xb1, 0x5c, 0x20, 0x00, 0x00, 0x00, 0x00, 0x10},
{0xb1, 0x5c, 0x20, 0x00, 0x00, 0x00, 0x00, 0x10},
{0xb1, 0x5c, 0x09, 0x01, 0x2c, 0x00, 0x00, 0x10},
@@ -585,14 +604,20 @@
{0xb1, 0x5c, 0x35, 0x01, 0xc0, 0x00, 0x00, 0x10}, /* global gain */
{}
};
+static const u8 om6802_init0[2][8] = {
+/*fixme: variable*/
+ {0xa0, 0x34, 0x29, 0x0e, 0x00, 0x00, 0x00, 0x10},
+ {0xa0, 0x34, 0x23, 0xb0, 0x00, 0x00, 0x00, 0x10},
+};
static const u8 om6802_sensor_init[][8] = {
- {0xa0, 0x34, 0x90, 0x05, 0x00, 0x00, 0x00, 0x10},
- {0xa0, 0x34, 0x49, 0x85, 0x00, 0x00, 0x00, 0x10},
- {0xa0, 0x34, 0x5a, 0xc0, 0x00, 0x00, 0x00, 0x10},
+ {0xa0, 0x34, 0xdf, 0x6d, 0x00, 0x00, 0x00, 0x10},
+ /* factory mode */
{0xa0, 0x34, 0xdd, 0x18, 0x00, 0x00, 0x00, 0x10},
+ /* output raw RGB */
+ {0xa0, 0x34, 0x5a, 0xc0, 0x00, 0x00, 0x00, 0x10},
/* {0xa0, 0x34, 0xfb, 0x11, 0x00, 0x00, 0x00, 0x10}, */
{0xa0, 0x34, 0xf0, 0x04, 0x00, 0x00, 0x00, 0x10},
- /* white balance & auto-exposure */
+ /* auto-exposure speed (0) / white balance mode (auto RGB) */
/* {0xa0, 0x34, 0xf1, 0x02, 0x00, 0x00, 0x00, 0x10},
* set color mode */
/* {0xa0, 0x34, 0xfe, 0x5b, 0x00, 0x00, 0x00, 0x10},
@@ -606,26 +631,29 @@
/* {0xa0, 0x34, 0xe8, 0x31, 0x00, 0x00, 0x00, 0x10},
* preset gamma */
{0xa0, 0x34, 0xe9, 0x0f, 0x00, 0x00, 0x00, 0x10},
- /* luminance mode (0x4f = AE) */
+ /* luminance mode (0x4f -> AutoExpo on) */
{0xa0, 0x34, 0xe4, 0xff, 0x00, 0x00, 0x00, 0x10},
/* preset shutter */
/* {0xa0, 0x34, 0xef, 0x00, 0x00, 0x00, 0x00, 0x10},
* auto frame rate */
/* {0xa0, 0x34, 0xfb, 0xee, 0x00, 0x00, 0x00, 0x10}, */
-
-/* {0xa0, 0x34, 0x71, 0x84, 0x00, 0x00, 0x00, 0x10}, */
-/* {0xa0, 0x34, 0x72, 0x05, 0x00, 0x00, 0x00, 0x10}, */
-/* {0xa0, 0x34, 0x68, 0x80, 0x00, 0x00, 0x00, 0x10}, */
-/* {0xa0, 0x34, 0x69, 0x01, 0x00, 0x00, 0x00, 0x10}, */
+ {0xa0, 0x34, 0x5d, 0x80, 0x00, 0x00, 0x00, 0x10},
+ {}
+};
+static const u8 om6802_sensor_param1[][8] = {
+ {0xa0, 0x34, 0x71, 0x84, 0x00, 0x00, 0x00, 0x10},
+ {0xa0, 0x34, 0x72, 0x05, 0x00, 0x00, 0x00, 0x10},
+ {0xa0, 0x34, 0x68, 0x80, 0x00, 0x00, 0x00, 0x10},
+ {0xa0, 0x34, 0x69, 0x01, 0x00, 0x00, 0x00, 0x10},
{}
};
static const u8 ov7630_sensor_init[][8] = {
{0xa1, 0x21, 0x76, 0x01, 0x00, 0x00, 0x00, 0x10},
{0xa1, 0x21, 0x12, 0xc8, 0x00, 0x00, 0x00, 0x10},
-/* win: delay 20ms */
+ {0xdd, 0x14, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, /* delay 20ms */
{0xa1, 0x21, 0x12, 0x48, 0x00, 0x00, 0x00, 0x10},
{0xa1, 0x21, 0x12, 0xc8, 0x00, 0x00, 0x00, 0x10},
-/* win: delay 20ms */
+ {0xdd, 0x14, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, /* delay 20ms */
{0xa1, 0x21, 0x12, 0x48, 0x00, 0x00, 0x00, 0x10},
/* win: i2c_r from 00 to 80 */
{0xd1, 0x21, 0x03, 0x80, 0x10, 0x20, 0x80, 0x10},
@@ -677,6 +705,7 @@
static const u8 ov7648_sensor_init[][8] = {
{0xa1, 0x21, 0x76, 0x00, 0x00, 0x00, 0x00, 0x10},
{0xa1, 0x21, 0x12, 0x80, 0x00, 0x00, 0x00, 0x10}, /* reset */
+ {0xdd, 0x14, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, /* delay 20ms */
{0xa1, 0x21, 0x12, 0x00, 0x00, 0x00, 0x00, 0x10},
{0xd1, 0x21, 0x03, 0xa4, 0x30, 0x88, 0x00, 0x10},
{0xb1, 0x21, 0x11, 0x80, 0x08, 0x00, 0x00, 0x10},
@@ -701,7 +730,9 @@
/* {0xd1, 0x21, 0x25, 0x80, 0x32, 0xfe, 0xa0, 0x10}, jfm done */
/* {0xd1, 0x21, 0x29, 0x00, 0x91, 0x00, 0x88, 0x10}, jfm done */
/* {0xb1, 0x21, 0x2d, 0x85, 0x00, 0x00, 0x00, 0x10}, set by setfreq */
-/*...*/
+ {}
+};
+static const u8 ov7648_sensor_param1[][8] = {
/* {0xa1, 0x21, 0x12, 0x08, 0x00, 0x00, 0x00, 0x10}, jfm done */
/* {0xa1, 0x21, 0x75, 0x06, 0x00, 0x00, 0x00, 0x10}, * COMN
* set by setvflip */
@@ -723,7 +754,7 @@
static const u8 ov7660_sensor_init[][8] = {
{0xa1, 0x21, 0x12, 0x80, 0x00, 0x00, 0x00, 0x10}, /* reset SCCB */
-/* (delay 20ms) */
+ {0xdd, 0x14, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, /* delay 20ms */
{0xa1, 0x21, 0x12, 0x05, 0x00, 0x00, 0x00, 0x10},
/* Outformat = rawRGB */
{0xa1, 0x21, 0x13, 0xb8, 0x00, 0x00, 0x00, 0x10}, /* init COM8 */
@@ -783,8 +814,11 @@
{0xc1, 0x21, 0x88, 0xaf, 0xc7, 0xdf, 0x00, 0x10}, /* gamma curve */
{0xc1, 0x21, 0x8b, 0x99, 0x99, 0xcf, 0x00, 0x10}, /* reserved */
{0xb1, 0x21, 0x92, 0x00, 0x00, 0x00, 0x00, 0x10}, /* DM_LNL/H */
+/* not in all ms-win traces*/
{0xa1, 0x21, 0xa1, 0x00, 0x00, 0x00, 0x00, 0x10},
-/****** (some exchanges in the win trace) ******/
+ {}
+};
+static const u8 ov7660_sensor_param1[][8] = {
{0xa1, 0x21, 0x1e, 0x01, 0x00, 0x00, 0x00, 0x10}, /* MVFP */
/* bits[3..0]reserved */
{0xa1, 0x21, 0x1e, 0x01, 0x00, 0x00, 0x00, 0x10},
@@ -797,6 +831,7 @@
{0xa1, 0x21, 0x00, 0x1f, 0x00, 0x00, 0x00, 0x10}, /* GAIN */
/* {0xb1, 0x21, 0x01, 0x78, 0x78, 0x00, 0x00, 0x10}, * BLUE */
/****** (some exchanges in the win trace) ******/
+/*fixme:param2*/
{0xa1, 0x21, 0x93, 0x00, 0x00, 0x00, 0x00, 0x10},/* dummy line hight */
{0xa1, 0x21, 0x92, 0x25, 0x00, 0x00, 0x00, 0x10}, /* dummy line low */
{0xa1, 0x21, 0x2a, 0x00, 0x00, 0x00, 0x00, 0x10}, /* EXHCH */
@@ -804,6 +839,7 @@
/* {0xa1, 0x21, 0x02, 0x90, 0x00, 0x00, 0x00, 0x10}, * RED */
/****** (some exchanges in the win trace) ******/
/******!! startsensor KO if changed !!****/
+/*fixme: param3*/
{0xa1, 0x21, 0x93, 0x01, 0x00, 0x00, 0x00, 0x10},
{0xa1, 0x21, 0x92, 0xff, 0x00, 0x00, 0x00, 0x10},
{0xa1, 0x21, 0x2a, 0x00, 0x00, 0x00, 0x00, 0x10},
@@ -811,6 +847,60 @@
{}
};
+static const u8 po1030_sensor_init[][8] = {
+/* the sensor registers are described in m5602/m5602_po1030.h */
+ {0xa1, 0x6e, 0x3f, 0x20, 0x00, 0x00, 0x00, 0x10}, /* sensor reset */
+ {0xdd, 0x14, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, /* delay 20ms */
+ {0xa1, 0x6e, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x10},
+ {0xa1, 0x6e, 0x3e, 0x00, 0x00, 0x00, 0x00, 0x10},
+ {0xd1, 0x6e, 0x04, 0x02, 0xb1, 0x02, 0x39, 0x10},
+ {0xd1, 0x6e, 0x08, 0x00, 0x01, 0x00, 0x00, 0x10},
+ {0xd1, 0x6e, 0x0c, 0x02, 0x7f, 0x01, 0xe0, 0x10},
+ {0xd1, 0x6e, 0x12, 0x03, 0x02, 0x00, 0x03, 0x10},
+ {0xd1, 0x6e, 0x16, 0x85, 0x40, 0x4a, 0x40, 0x10}, /* r/g1/b/g2 gains */
+ {0xc1, 0x6e, 0x1a, 0x00, 0x80, 0x00, 0x00, 0x10},
+ {0xd1, 0x6e, 0x1d, 0x08, 0x03, 0x00, 0x00, 0x10},
+ {0xd1, 0x6e, 0x23, 0x00, 0xb0, 0x00, 0x94, 0x10},
+ {0xd1, 0x6e, 0x27, 0x58, 0x00, 0x00, 0x00, 0x10},
+ {0xb1, 0x6e, 0x2b, 0x00, 0x00, 0x00, 0x00, 0x10},
+ {0xd1, 0x6e, 0x2d, 0x14, 0x35, 0x61, 0x84, 0x10}, /* gamma corr */
+ {0xd1, 0x6e, 0x31, 0xa2, 0xbd, 0xd8, 0xff, 0x10},
+ {0xd1, 0x6e, 0x35, 0x06, 0x1e, 0x12, 0x02, 0x10}, /* color matrix */
+ {0xd1, 0x6e, 0x39, 0xaa, 0x53, 0x37, 0xd5, 0x10},
+ {0xa1, 0x6e, 0x3d, 0xf2, 0x00, 0x00, 0x00, 0x10},
+ {0xd1, 0x6e, 0x3e, 0x00, 0x00, 0x80, 0x03, 0x10},
+ {0xd1, 0x6e, 0x42, 0x03, 0x00, 0x00, 0x00, 0x10},
+ {0xc1, 0x6e, 0x46, 0x00, 0x80, 0x80, 0x00, 0x10},
+ {0xd1, 0x6e, 0x4b, 0x02, 0xef, 0x08, 0xcd, 0x10},
+ {0xd1, 0x6e, 0x4f, 0x00, 0xd0, 0x00, 0xa0, 0x10},
+ {0xd1, 0x6e, 0x53, 0x01, 0xaa, 0x01, 0x40, 0x10},
+ {0xd1, 0x6e, 0x5a, 0x50, 0x04, 0x30, 0x03, 0x10}, /* raw rgb bayer */
+ {0xa1, 0x6e, 0x5e, 0x00, 0x00, 0x00, 0x00, 0x10},
+ {0xd1, 0x6e, 0x5f, 0x10, 0x40, 0xff, 0x00, 0x10},
+
+ {0xd1, 0x6e, 0x63, 0x40, 0x40, 0x00, 0x00, 0x10},
+ {0xd1, 0x6e, 0x67, 0x00, 0x00, 0x00, 0x00, 0x10},
+ {0xd1, 0x6e, 0x6b, 0x00, 0x00, 0x00, 0x00, 0x10},
+ {0xd1, 0x6e, 0x6f, 0x00, 0x00, 0x00, 0x00, 0x10},
+ {0xc1, 0x6e, 0x73, 0x10, 0x80, 0xeb, 0x00, 0x10},
+ {}
+};
+static const u8 po1030_sensor_param1[][8] = {
+/* from ms-win traces - these values change with auto gain/expo/wb.. */
+ {0xa1, 0x6e, 0x1e, 0x03, 0x00, 0x00, 0x00, 0x10},
+ {0xa1, 0x6e, 0x1e, 0x03, 0x00, 0x00, 0x00, 0x10},
+/* mean values */
+ {0xc1, 0x6e, 0x1a, 0x02, 0xd4, 0xa4, 0x00, 0x10}, /* integlines */
+ {0xa1, 0x6e, 0x15, 0x04, 0x00, 0x00, 0x00, 0x10}, /* global gain */
+ {0xc1, 0x6e, 0x16, 0x40, 0x40, 0x40, 0x00, 0x10}, /* r/g1/b gains */
+
+ {0xa1, 0x6e, 0x1d, 0x08, 0x00, 0x00, 0x00, 0x10}, /* control1 */
+ {0xa1, 0x6e, 0x06, 0x02, 0x00, 0x00, 0x00, 0x10}, /* frameheight */
+ {0xa1, 0x6e, 0x07, 0xd5, 0x00, 0x00, 0x00, 0x10},
+/* {0xc1, 0x6e, 0x16, 0x49, 0x40, 0x45, 0x00, 0x10}, */
+ {}
+};
+
static const u8 sp80708_sensor_init[][8] = {
{0xa1, 0x18, 0x06, 0xf9, 0x00, 0x00, 0x00, 0x10},
{0xa1, 0x18, 0x09, 0x1f, 0x00, 0x00, 0x00, 0x10},
@@ -883,7 +973,9 @@
{0xa1, 0x18, 0x67, 0x24, 0x00, 0x00, 0x00, 0x10},
{0xa1, 0x18, 0x68, 0x08, 0x00, 0x00, 0x00, 0x10},
{0xa1, 0x18, 0x2f, 0xc9, 0x00, 0x00, 0x00, 0x10},
- /********/
+ {}
+};
+static const u8 sp80708_sensor_param1[][8] = {
{0xa1, 0x18, 0x0c, 0x04, 0x00, 0x00, 0x00, 0x10},
{0xa1, 0x18, 0x0c, 0x04, 0x00, 0x00, 0x00, 0x10},
{0xa1, 0x18, 0x03, 0x01, 0x00, 0x00, 0x00, 0x10},
@@ -894,6 +986,19 @@
{}
};
+static const u8 (*sensor_init[10])[8] = {
+ hv7131r_sensor_init, /* HV7131R 0 */
+ mi0360_sensor_init, /* MI0360 1 */
+ mo4000_sensor_init, /* MO4000 2 */
+ mt9v111_sensor_init, /* MT9V111 3 */
+ om6802_sensor_init, /* OM6802 4 */
+ ov7630_sensor_init, /* OV7630 5 */
+ ov7648_sensor_init, /* OV7648 6 */
+ ov7660_sensor_init, /* OV7660 7 */
+ po1030_sensor_init, /* PO1030 8 */
+ sp80708_sensor_init, /* SP80708 9 */
+};
+
/* read <len> bytes to gspca_dev->usb_buf */
static void reg_r(struct gspca_dev *gspca_dev,
u16 value, int len)
@@ -958,8 +1063,15 @@
struct sd *sd = (struct sd *) gspca_dev;
PDEBUG(D_USBO, "i2c_w2 [%02x] = %02x", reg, val);
- gspca_dev->usb_buf[0] = 0x81 | (2 << 4); /* = a1 */
- gspca_dev->usb_buf[1] = sd->i2c_base;
+ switch (sd->sensor) {
+ case SENSOR_OM6802: /* i2c command = a0 (100 kHz) */
+ gspca_dev->usb_buf[0] = 0x80 | (2 << 4);
+ break;
+ default: /* i2c command = a1 (400 kHz) */
+ gspca_dev->usb_buf[0] = 0x81 | (2 << 4);
+ break;
+ }
+ gspca_dev->usb_buf[1] = sd->i2c_addr;
gspca_dev->usb_buf[2] = reg;
gspca_dev->usb_buf[3] = val;
gspca_dev->usb_buf[4] = 0;
@@ -991,14 +1103,21 @@
msleep(2);
}
-/* read 5 bytes in gspca_dev->usb_buf */
-static void i2c_r5(struct gspca_dev *gspca_dev, u8 reg)
+/* sensor read 'len' (1..5) bytes in gspca_dev->usb_buf */
+static void i2c_r(struct gspca_dev *gspca_dev, u8 reg, int len)
{
struct sd *sd = (struct sd *) gspca_dev;
u8 mode[8];
- mode[0] = 0x81 | 0x10;
- mode[1] = sd->i2c_base;
+ switch (sd->sensor) {
+ case SENSOR_OM6802: /* i2c command = 90 (100 kHz) */
+ mode[0] = 0x80 | 0x10;
+ break;
+ default: /* i2c command = 91 (400 kHz) */
+ mode[0] = 0x81 | 0x10;
+ break;
+ }
+ mode[1] = sd->i2c_addr;
mode[2] = reg;
mode[3] = 0;
mode[4] = 0;
@@ -1007,33 +1126,43 @@
mode[7] = 0x10;
i2c_w8(gspca_dev, mode);
msleep(2);
- mode[0] = 0x81 | (5 << 4) | 0x02;
+ mode[0] = (mode[0] & 0x81) | (len << 4) | 0x02;
mode[2] = 0;
i2c_w8(gspca_dev, mode);
msleep(2);
reg_r(gspca_dev, 0x0a, 5);
}
-static int hv7131r_probe(struct gspca_dev *gspca_dev)
+static void i2c_w_seq(struct gspca_dev *gspca_dev,
+ const u8 (*data)[8])
+{
+ while ((*data)[0] != 0) {
+ if ((*data)[0] != 0xdd)
+ i2c_w8(gspca_dev, *data);
+ else
+ msleep((*data)[1]);
+ data++;
+ }
+}
+
+static void hv7131r_probe(struct gspca_dev *gspca_dev)
{
i2c_w1(gspca_dev, 0x02, 0); /* sensor wakeup */
msleep(10);
reg_w1(gspca_dev, 0x02, 0x66); /* Gpio on */
msleep(10);
- i2c_r5(gspca_dev, 0); /* read sensor id */
+ i2c_r(gspca_dev, 0, 5); /* read sensor id */
if (gspca_dev->usb_buf[0] == 0x02
&& gspca_dev->usb_buf[1] == 0x09
&& gspca_dev->usb_buf[2] == 0x01
&& gspca_dev->usb_buf[3] == 0x00
&& gspca_dev->usb_buf[4] == 0x00) {
- PDEBUG(D_PROBE, "Find Sensor sn9c102P HV7131R");
- return 0;
+ PDEBUG(D_PROBE, "Sensor sn9c102P HV7131R found");
+ return;
}
- PDEBUG(D_PROBE, "Find Sensor 0x%02x 0x%02x 0x%02x",
+ PDEBUG(D_PROBE, "Sensor 0x%02x 0x%02x 0x%02x - sn9c102P not found",
gspca_dev->usb_buf[0], gspca_dev->usb_buf[1],
gspca_dev->usb_buf[2]);
- PDEBUG(D_PROBE, "Sensor sn9c102P Not found");
- return -ENODEV;
}
static void mi0360_probe(struct gspca_dev *gspca_dev)
@@ -1075,7 +1204,6 @@
case 0x823a:
PDEBUG(D_PROBE, "Sensor mt9v111");
sd->sensor = SENSOR_MT9V111;
- sd->i2c_base = 0x5c;
break;
case 0x8243:
PDEBUG(D_PROBE, "Sensor mi0360");
@@ -1086,7 +1214,42 @@
}
}
-static int configure_gpio(struct gspca_dev *gspca_dev,
+static void ov7648_probe(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ /* check ov76xx */
+ reg_w1(gspca_dev, 0x17, 0x62);
+ reg_w1(gspca_dev, 0x01, 0x08);
+ sd->i2c_addr = 0x21;
+ i2c_r(gspca_dev, 0x0a, 2);
+ if (gspca_dev->usb_buf[3] == 0x76) { /* ov76xx */
+ PDEBUG(D_PROBE, "Sensor ov%02x%02x",
+ gspca_dev->usb_buf[3], gspca_dev->usb_buf[4]);
+ return;
+ }
+
+ /* reset */
+ reg_w1(gspca_dev, 0x01, 0x29);
+ reg_w1(gspca_dev, 0x17, 0x42);
+
+ /* check po1030 */
+ reg_w1(gspca_dev, 0x17, 0x62);
+ reg_w1(gspca_dev, 0x01, 0x08);
+ sd->i2c_addr = 0x6e;
+ i2c_r(gspca_dev, 0x00, 2);
+ if (gspca_dev->usb_buf[3] == 0x10 /* po1030 */
+ && gspca_dev->usb_buf[4] == 0x30) {
+ PDEBUG(D_PROBE, "Sensor po1030");
+ sd->sensor = SENSOR_PO1030;
+ return;
+ }
+
+ PDEBUG(D_PROBE, "Unknown sensor %02x%02x",
+ gspca_dev->usb_buf[3], gspca_dev->usb_buf[4]);
+}
+
+static void bridge_init(struct gspca_dev *gspca_dev,
const u8 *sn9c1xx)
{
struct sd *sd = (struct sd *) gspca_dev;
@@ -1103,9 +1266,10 @@
/* configure gpio */
reg_w(gspca_dev, 0x01, &sn9c1xx[1], 2);
reg_w(gspca_dev, 0x08, &sn9c1xx[8], 2);
- reg_w(gspca_dev, 0x17, &sn9c1xx[0x17], 5); /* jfm len was 3 */
+ reg_w(gspca_dev, 0x17, &sn9c1xx[0x17], 5);
switch (sd->sensor) {
case SENSOR_OV7660:
+ case SENSOR_PO1030:
case SENSOR_SP80708:
reg9a = reg9a_spec;
break;
@@ -1115,7 +1279,7 @@
}
reg_w(gspca_dev, 0x9a, reg9a, 6);
- reg_w(gspca_dev, 0xd4, regd4, sizeof regd4); /*fixme:jfm was 60 only*/
+ reg_w(gspca_dev, 0xd4, regd4, sizeof regd4);
reg_w(gspca_dev, 0x03, &sn9c1xx[3], 0x0f);
@@ -1127,10 +1291,22 @@
reg_w1(gspca_dev, 0x01, 0x40);
break;
case SENSOR_OM6802:
- reg_w1(gspca_dev, 0x02, 0x71);
- reg_w1(gspca_dev, 0x01, 0x42);
+ msleep(10);
+ reg_w1(gspca_dev, 0x02, 0x73);
+ reg_w1(gspca_dev, 0x17, 0x60);
+ reg_w1(gspca_dev, 0x01, 0x22);
+ msleep(100);
+ reg_w1(gspca_dev, 0x01, 0x62);
+ reg_w1(gspca_dev, 0x17, 0x64);
reg_w1(gspca_dev, 0x17, 0x64);
reg_w1(gspca_dev, 0x01, 0x42);
+ msleep(10);
+ reg_w1(gspca_dev, 0x01, 0x42);
+ i2c_w8(gspca_dev, om6802_init0[0]);
+ i2c_w8(gspca_dev, om6802_init0[1]);
+ msleep(15);
+ reg_w1(gspca_dev, 0x02, 0x71);
+ msleep(150);
break;
case SENSOR_OV7630:
reg_w1(gspca_dev, 0x01, 0x61);
@@ -1144,7 +1320,14 @@
reg_w1(gspca_dev, 0x01, 0x62);
reg_w1(gspca_dev, 0x01, 0x42);
break;
+ case SENSOR_PO1030:
+ reg_w1(gspca_dev, 0x01, 0x61);
+ reg_w1(gspca_dev, 0x17, 0x20);
+ reg_w1(gspca_dev, 0x01, 0x60);
+ reg_w1(gspca_dev, 0x01, 0x40);
+ break;
case SENSOR_OV7660:
+ /* fall thru */
case SENSOR_SP80708:
reg_w1(gspca_dev, 0x01, 0x63);
reg_w1(gspca_dev, 0x17, 0x20);
@@ -1153,143 +1336,18 @@
msleep(100);
reg_w1(gspca_dev, 0x02, 0x62);
break;
+ default:
/* case SENSOR_HV7131R: */
/* case SENSOR_MI0360: */
/* case SENSOR_MO4000: */
- default:
reg_w1(gspca_dev, 0x01, 0x43);
reg_w1(gspca_dev, 0x17, 0x61);
reg_w1(gspca_dev, 0x01, 0x42);
- if (sd->sensor == SENSOR_HV7131R) {
- if (hv7131r_probe(gspca_dev) < 0)
- return -ENODEV;
- }
+ if (sd->sensor == SENSOR_HV7131R
+ && sd->bridge == BRIDGE_SN9C102P)
+ hv7131r_probe(gspca_dev);
break;
}
- return 0;
-}
-
-static void hv7131R_InitSensor(struct gspca_dev *gspca_dev)
-{
- int i = 0;
- static const u8 SetSensorClk[] = /* 0x08 Mclk */
- { 0xa1, 0x11, 0x01, 0x18, 0x00, 0x00, 0x00, 0x10 };
-
- while (hv7131r_sensor_init[i][0]) {
- i2c_w8(gspca_dev, hv7131r_sensor_init[i]);
- i++;
- }
- i2c_w8(gspca_dev, SetSensorClk);
-}
-
-static void mi0360_InitSensor(struct gspca_dev *gspca_dev)
-{
- int i = 0;
-
- while (mi0360_sensor_init[i][0]) {
- i2c_w8(gspca_dev, mi0360_sensor_init[i]);
- i++;
- }
-}
-
-static void mo4000_InitSensor(struct gspca_dev *gspca_dev)
-{
- int i = 0;
-
- while (mo4000_sensor_init[i][0]) {
- i2c_w8(gspca_dev, mo4000_sensor_init[i]);
- i++;
- }
-}
-
-static void mt9v111_InitSensor(struct gspca_dev *gspca_dev)
-{
- int i = 0;
-
- i2c_w8(gspca_dev, mt9v111_sensor_init[i]);
- i++;
- msleep(20);
- while (mt9v111_sensor_init[i][0]) {
- i2c_w8(gspca_dev, mt9v111_sensor_init[i]);
- i++;
- }
-}
-
-static void om6802_InitSensor(struct gspca_dev *gspca_dev)
-{
- int i = 0;
-
- while (om6802_sensor_init[i][0]) {
- i2c_w8(gspca_dev, om6802_sensor_init[i]);
- i++;
- }
-}
-
-static void ov7630_InitSensor(struct gspca_dev *gspca_dev)
-{
- int i = 0;
-
- i2c_w8(gspca_dev, ov7630_sensor_init[i]); /* 76 01 */
- i++;
- i2c_w8(gspca_dev, ov7630_sensor_init[i]); /* 12 c8 (RGB+SRST) */
- i++;
- msleep(20);
- i2c_w8(gspca_dev, ov7630_sensor_init[i]); /* 12 48 */
- i++;
- i2c_w8(gspca_dev, ov7630_sensor_init[i]); /* 12 c8 */
- i++;
- msleep(20);
- i2c_w8(gspca_dev, ov7630_sensor_init[i]); /* 12 48 */
- i++;
-/*jfm:win i2c_r from 00 to 80*/
-
- while (ov7630_sensor_init[i][0]) {
- i2c_w8(gspca_dev, ov7630_sensor_init[i]);
- i++;
- }
-}
-
-static void ov7648_InitSensor(struct gspca_dev *gspca_dev)
-{
- int i = 0;
-
- i2c_w8(gspca_dev, ov7648_sensor_init[i]);
- i++;
-/* win: dble reset */
- i2c_w8(gspca_dev, ov7648_sensor_init[i]); /* reset */
- i++;
- msleep(20);
-/* win: i2c reg read 00..7f */
- while (ov7648_sensor_init[i][0]) {
- i2c_w8(gspca_dev, ov7648_sensor_init[i]);
- i++;
- }
-}
-
-static void ov7660_InitSensor(struct gspca_dev *gspca_dev)
-{
- int i = 0;
-
- i2c_w8(gspca_dev, ov7660_sensor_init[i]); /* reset SCCB */
- i++;
- msleep(20);
- while (ov7660_sensor_init[i][0]) {
- i2c_w8(gspca_dev, ov7660_sensor_init[i]);
- i++;
- }
-}
-
-static void sp80708_InitSensor(struct gspca_dev *gspca_dev)
-{
- int i = 0;
-
- i2c_w8(gspca_dev, sp80708_sensor_init[i]); /* reset SCCB */
- i++;
- msleep(20);
- while (sp80708_sensor_init[i][0]) {
- i2c_w8(gspca_dev, sp80708_sensor_init[i]);
- i++;
- }
}
/* this function is called at probe time */
@@ -1305,8 +1363,7 @@
cam->npkt = 24; /* 24 packets per ISOC message */
sd->bridge = id->driver_info >> 16;
- sd->sensor = id->driver_info >> 8;
- sd->i2c_base = id->driver_info;
+ sd->sensor = id->driver_info;
sd->brightness = BRIGHTNESS_DEF;
sd->contrast = CONTRAST_DEF;
@@ -1322,7 +1379,6 @@
sd->quality = QUALITY_DEF;
sd->jpegqual = 80;
- gspca_dev->ctrl_dis = ctrl_dis[sd->sensor];
return 0;
}
@@ -1330,6 +1386,7 @@
static int sd_init(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
+ const u8 *sn9c1xx;
u8 regGpio[] = { 0x29, 0x74 };
u8 regF1;
@@ -1356,8 +1413,14 @@
case BRIDGE_SN9C120:
if (regF1 != 0x12)
return -ENODEV;
- if (sd->sensor == SENSOR_MI0360)
+ switch (sd->sensor) {
+ case SENSOR_MI0360:
mi0360_probe(gspca_dev);
+ break;
+ case SENSOR_OV7648:
+ ov7648_probe(gspca_dev);
+ break;
+ }
regGpio[1] = 0x70;
reg_w(gspca_dev, 0x01, regGpio, 2);
break;
@@ -1372,6 +1435,12 @@
reg_w1(gspca_dev, 0xf1, 0x01);
+ /* set the i2c address */
+ sn9c1xx = sn_tb[sd->sensor];
+ sd->i2c_addr = sn9c1xx[9];
+
+ gspca_dev->ctrl_dis = ctrl_dis[sd->sensor];
+
return 0;
}
@@ -1383,7 +1452,7 @@
switch (sd->sensor) {
case SENSOR_HV7131R: {
u8 Expodoit[] =
- { 0xc1, 0x11, 0x25, 0x07, 0x27, 0xc0, 0x00, 0x16 };
+ { 0xc1, 0x11, 0x25, 0x00, 0x00, 0x00, 0x00, 0x16 };
Expodoit[3] = expo >> 16;
Expodoit[4] = expo >> 8;
@@ -1393,7 +1462,7 @@
}
case SENSOR_MI0360: {
u8 expoMi[] = /* exposure 0x0635 -> 4 fp/s 0x10 */
- { 0xb1, 0x5d, 0x09, 0x06, 0x35, 0x00, 0x00, 0x16 };
+ { 0xb1, 0x5d, 0x09, 0x00, 0x00, 0x00, 0x00, 0x16 };
static const u8 doit[] = /* update sensor */
{ 0xb1, 0x5d, 0x07, 0x00, 0x03, 0x00, 0x00, 0x10 };
static const u8 sensorgo[] = /* sensor on */
@@ -1412,9 +1481,9 @@
}
case SENSOR_MO4000: {
u8 expoMof[] =
- { 0xa1, 0x21, 0x0f, 0x20, 0x00, 0x00, 0x00, 0x10 };
+ { 0xa1, 0x21, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x10 };
u8 expoMo10[] =
- { 0xa1, 0x21, 0x10, 0x20, 0x00, 0x00, 0x00, 0x10 };
+ { 0xa1, 0x21, 0x10, 0x00, 0x00, 0x00, 0x00, 0x10 };
static const u8 gainMo[] =
{ 0xa1, 0x21, 0x00, 0x10, 0x00, 0x00, 0x00, 0x1d };
@@ -1450,6 +1519,7 @@
case SENSOR_OM6802: {
u8 gainOm[] =
{ 0xa0, 0x34, 0xe5, 0x00, 0x00, 0x00, 0x00, 0x10 };
+ /* preset AGC - works when AutoExpo = off */
if (expo > 0x03ff)
expo = 0x03ff;
@@ -1457,7 +1527,7 @@
expo = 0x0001;
gainOm[3] = expo >> 2;
i2c_w8(gspca_dev, gainOm);
- reg_w1(gspca_dev, 0x96, (expo >> 5) & 0x1f);
+ reg_w1(gspca_dev, 0x96, expo >> 5);
PDEBUG(D_FRAM, "set exposure %d", gainOm[3]);
break;
}
@@ -1489,7 +1559,7 @@
case SENSOR_MT9V111:
expo = sd->brightness >> 8;
sd->exposure = setexposure(gspca_dev, expo);
- break;
+ return; /* don't set the Y offset */
case SENSOR_OM6802:
expo = sd->brightness >> 6;
sd->exposure = setexposure(gspca_dev, expo);
@@ -1497,8 +1567,7 @@
break;
}
- if (sd->sensor != SENSOR_MT9V111)
- reg_w1(gspca_dev, 0x96, k2); /* color matrix Y offset */
+ reg_w1(gspca_dev, 0x96, k2); /* color matrix Y offset */
}
static void setcontrast(struct gspca_dev *gspca_dev)
@@ -1526,6 +1595,7 @@
-24, -38, 64, /* UR UG UB */
62, -51, -9 /* VR VG VB */
};
+
for (i = 0; i < 6; i++) {
v = uv[i] * sd->colors / COLOR_DEF;
reg8a[i * 2] = v;
@@ -1605,6 +1675,8 @@
{
u8 comn;
+ if (sd->gspca_dev.ctrl_dis & (1 << VFLIP_IDX))
+ return;
if (sd->sensor == SENSOR_OV7630) {
comn = 0x02;
if (!sd->vflip)
@@ -1726,8 +1798,9 @@
{
struct sd *sd = (struct sd *) gspca_dev;
int i;
- u8 reg1, reg17;
+ u8 reg1, reg2, reg17;
const u8 *sn9c1xx;
+ const u8 (*init)[8];
int mode;
static const u8 C0[] = { 0x2d, 0x2d, 0x3a, 0x05, 0x04, 0x3f };
static const u8 CA[] = { 0x28, 0xd8, 0x14, 0xec };
@@ -1743,8 +1816,26 @@
0x21); /* JPEG 422 */
jpeg_set_qual(sd->jpeg_hdr, sd->quality);
- sn9c1xx = sn_tb[(int) sd->sensor];
- configure_gpio(gspca_dev, sn9c1xx);
+ /* initialize the bridge */
+ sn9c1xx = sn_tb[sd->sensor];
+ bridge_init(gspca_dev, sn9c1xx);
+
+ /* initialize the sensor */
+ i2c_w_seq(gspca_dev, sensor_init[sd->sensor]);
+
+ switch (sd->sensor) {
+ case SENSOR_OM6802:
+ reg2 = 0x71;
+ break;
+ case SENSOR_SP80708:
+ reg2 = 0x62;
+ break;
+ default:
+ reg2 = 0x40;
+ break;
+ }
+ reg_w1(gspca_dev, 0x02, reg2);
+ reg_w1(gspca_dev, 0x02, reg2);
reg_w1(gspca_dev, 0x15, sn9c1xx[0x15]);
reg_w1(gspca_dev, 0x16, sn9c1xx[0x16]);
@@ -1771,6 +1862,9 @@
case SENSOR_OV7660:
reg17 = 0xa0;
break;
+ case SENSOR_PO1030:
+ reg17 = 0xa0;
+ break;
default:
reg17 = 0x60;
break;
@@ -1791,6 +1885,10 @@
reg_w1(gspca_dev, 0x9a, 0x07);
reg_w1(gspca_dev, 0x99, 0x59);
break;
+ case SENSOR_OM6802:
+ reg_w1(gspca_dev, 0x9a, 0x08);
+ reg_w1(gspca_dev, 0x99, 0x10);
+ break;
case SENSOR_OV7648:
reg_w1(gspca_dev, 0x9a, 0x0a);
reg_w1(gspca_dev, 0x99, 0x60);
@@ -1806,21 +1904,20 @@
break;
}
- mode = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv;
+ reg_w(gspca_dev, 0x84, reg84, sizeof reg84);
+ reg_w1(gspca_dev, 0x05, sn9c1xx[5]); /* red */
+ reg_w1(gspca_dev, 0x07, sn9c1xx[7]); /* green */
+ reg_w1(gspca_dev, 0x06, sn9c1xx[6]); /* blue */
+
+ init = NULL;
+ mode = gspca_dev->cam.cam_mode[gspca_dev->curr_mode].priv;
if (mode)
reg1 = 0x46; /* 320x240: clk 48Mhz, video trf enable */
else
reg1 = 0x06; /* 640x480: clk 24Mhz, video trf enable */
reg17 = 0x61; /* 0x:20: enable sensor clock */
switch (sd->sensor) {
- case SENSOR_HV7131R:
- hv7131R_InitSensor(gspca_dev);
- break;
- case SENSOR_MI0360:
- mi0360_InitSensor(gspca_dev);
- break;
case SENSOR_MO4000:
- mo4000_InitSensor(gspca_dev);
if (mode) {
/* reg1 = 0x46; * 320 clk 48Mhz 60fp/s */
reg1 = 0x06; /* clk 24Mz */
@@ -1830,7 +1927,7 @@
}
break;
case SENSOR_MT9V111:
- mt9v111_InitSensor(gspca_dev);
+ init = mt9v111_sensor_param1;
if (mode) {
reg1 = 0x04; /* 320 clk 48Mhz */
} else {
@@ -1839,22 +1936,21 @@
}
break;
case SENSOR_OM6802:
- om6802_InitSensor(gspca_dev);
+ init = om6802_sensor_param1;
reg17 = 0x64; /* 640 MCKSIZE */
break;
case SENSOR_OV7630:
- ov7630_InitSensor(gspca_dev);
setvflip(sd);
reg17 = 0xe2;
reg1 = 0x44;
break;
case SENSOR_OV7648:
- ov7648_InitSensor(gspca_dev);
+ init = ov7648_sensor_param1;
reg17 = 0x21;
/* reg1 = 0x42; * 42 - 46? */
break;
case SENSOR_OV7660:
- ov7660_InitSensor(gspca_dev);
+ init = ov7660_sensor_param1;
if (sd->bridge == BRIDGE_SN9C120) {
if (mode) { /* 320x240 - 160x120 */
reg17 = 0xa2;
@@ -1866,9 +1962,14 @@
* inverse power down */
}
break;
+ case SENSOR_PO1030:
+ init = po1030_sensor_param1;
+ reg17 = 0xa2;
+ reg1 = 0x44;
+ break;
default:
/* case SENSOR_SP80708: */
- sp80708_InitSensor(gspca_dev);
+ init = sp80708_sensor_param1;
if (mode) {
/*?? reg1 = 0x04; * 320 clk 48Mhz */
} else {
@@ -1877,6 +1978,13 @@
}
break;
}
+
+ /* more sensor initialization - param1 */
+ if (init != NULL) {
+ i2c_w_seq(gspca_dev, init);
+/* init = NULL; */
+ }
+
reg_w(gspca_dev, 0xc0, C0, 6);
reg_w(gspca_dev, 0xca, CA, 4);
switch (sd->sensor) {
@@ -1891,6 +1999,7 @@
break;
}
+
/* here change size mode 0 -> VGA; 1 -> CIF */
sd->reg18 = sn9c1xx[0x18] | (mode << 4) | 0x40;
reg_w1(gspca_dev, 0x18, sd->reg18);
@@ -1898,6 +2007,7 @@
reg_w1(gspca_dev, 0x17, reg17);
reg_w1(gspca_dev, 0x01, reg1);
+
switch (sd->sensor) {
case SENSOR_OV7630:
setvflip(sd);
@@ -1937,14 +2047,11 @@
/* fall thru */
case SENSOR_MT9V111:
case SENSOR_OV7630:
+ case SENSOR_PO1030:
data = 0x29;
break;
- default:
-/* case SENSOR_MO4000: */
-/* case SENSOR_OV7660: */
- break;
}
- sn9c1xx = sn_tb[(int) sd->sensor];
+ sn9c1xx = sn_tb[sd->sensor];
reg_w1(gspca_dev, 0x01, sn9c1xx[1]);
reg_w1(gspca_dev, 0x17, sn9c1xx[0x17]);
reg_w1(gspca_dev, 0x01, sn9c1xx[1]);
@@ -1987,11 +2094,19 @@
sd->exposure = setexposure(gspca_dev,
(unsigned int) (expotimes << 8));
break;
+ case SENSOR_OM6802:
+ expotimes = sd->exposure;
+ expotimes += (luma_mean - delta) >> 2;
+ if (expotimes < 0)
+ expotimes = 0;
+ sd->exposure = setexposure(gspca_dev,
+ (unsigned int) expotimes);
+ setredblue(gspca_dev);
+ break;
default:
/* case SENSOR_MO4000: */
/* case SENSOR_MI0360: */
/* case SENSOR_MT9V111: */
-/* case SENSOR_OM6802: */
expotimes = sd->exposure;
expotimes += (luma_mean - delta) >> 6;
if (expotimes < 0)
@@ -2007,7 +2122,6 @@
/* scan the URB packets */
/* This function is run at interrupt level. */
static void sd_pkt_scan(struct gspca_dev *gspca_dev,
- struct gspca_frame *frame, /* target */
u8 *data, /* isoc packet */
int len) /* iso packet length */
{
@@ -2019,7 +2133,7 @@
/* end of frame */
gspca_frame_add(gspca_dev, LAST_PACKET,
- frame, data, sof + 2);
+ data, sof + 2);
if (sd->ag_cnt < 0)
return;
/* w1 w2 w3 */
@@ -2042,10 +2156,10 @@
if (gspca_dev->last_packet_type == LAST_PACKET) {
/* put the JPEG 422 header */
- gspca_frame_add(gspca_dev, FIRST_PACKET, frame,
+ gspca_frame_add(gspca_dev, FIRST_PACKET,
sd->jpeg_hdr, JPEG_HDR_SZ);
}
- gspca_frame_add(gspca_dev, INTER_PACKET, frame, data, len);
+ gspca_frame_add(gspca_dev, INTER_PACKET, data, len);
}
static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val)
@@ -2295,69 +2409,69 @@
};
/* -- module initialisation -- */
-#define BSI(bridge, sensor, i2c_addr) \
+#define BS(bridge, sensor) \
.driver_info = (BRIDGE_ ## bridge << 16) \
- | (SENSOR_ ## sensor << 8) \
- | (i2c_addr)
+ | SENSOR_ ## sensor
static const __devinitdata struct usb_device_id device_table[] = {
#if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE
- {USB_DEVICE(0x0458, 0x7025), BSI(SN9C120, MI0360, 0x5d)},
- {USB_DEVICE(0x0458, 0x702e), BSI(SN9C120, OV7660, 0x21)},
+ {USB_DEVICE(0x0458, 0x7025), BS(SN9C120, MI0360)},
+ {USB_DEVICE(0x0458, 0x702e), BS(SN9C120, OV7660)},
#endif
- {USB_DEVICE(0x045e, 0x00f5), BSI(SN9C105, OV7660, 0x21)},
- {USB_DEVICE(0x045e, 0x00f7), BSI(SN9C105, OV7660, 0x21)},
- {USB_DEVICE(0x0471, 0x0327), BSI(SN9C105, MI0360, 0x5d)},
- {USB_DEVICE(0x0471, 0x0328), BSI(SN9C105, MI0360, 0x5d)},
- {USB_DEVICE(0x0471, 0x0330), BSI(SN9C105, MI0360, 0x5d)},
- {USB_DEVICE(0x06f8, 0x3004), BSI(SN9C105, OV7660, 0x21)},
- {USB_DEVICE(0x06f8, 0x3008), BSI(SN9C105, OV7660, 0x21)},
- {USB_DEVICE(0x0c45, 0x6040), BSI(SN9C102P, HV7131R, 0x11)},
-/* bw600.inf:
- {USB_DEVICE(0x0c45, 0x6040), BSI(SN9C102P, MI0360, 0x5d)}, */
-/* {USB_DEVICE(0x0c45, 0x603a), BSI(SN9C102P, OV7648, 0x??)}, */
-/* {USB_DEVICE(0x0c45, 0x607a), BSI(SN9C102P, OV7648, 0x??)}, */
- {USB_DEVICE(0x0c45, 0x607c), BSI(SN9C102P, HV7131R, 0x11)},
-/* {USB_DEVICE(0x0c45, 0x607e), BSI(SN9C102P, OV7630, 0x??)}, */
- {USB_DEVICE(0x0c45, 0x60c0), BSI(SN9C105, MI0360, 0x5d)},
-/* {USB_DEVICE(0x0c45, 0x60c8), BSI(SN9C105, OM6802, 0x??)}, */
-/* {USB_DEVICE(0x0c45, 0x60cc), BSI(SN9C105, HV7131GP, 0x??)}, */
- {USB_DEVICE(0x0c45, 0x60ec), BSI(SN9C105, MO4000, 0x21)},
-/* {USB_DEVICE(0x0c45, 0x60ef), BSI(SN9C105, ICM105C, 0x??)}, */
-/* {USB_DEVICE(0x0c45, 0x60fa), BSI(SN9C105, OV7648, 0x??)}, */
- {USB_DEVICE(0x0c45, 0x60fb), BSI(SN9C105, OV7660, 0x21)},
+ {USB_DEVICE(0x045e, 0x00f5), BS(SN9C105, OV7660)},
+ {USB_DEVICE(0x045e, 0x00f7), BS(SN9C105, OV7660)},
+ {USB_DEVICE(0x0471, 0x0327), BS(SN9C105, MI0360)},
+ {USB_DEVICE(0x0471, 0x0328), BS(SN9C105, MI0360)},
+ {USB_DEVICE(0x0471, 0x0330), BS(SN9C105, MI0360)},
+ {USB_DEVICE(0x06f8, 0x3004), BS(SN9C105, OV7660)},
+ {USB_DEVICE(0x06f8, 0x3008), BS(SN9C105, OV7660)},
+/* {USB_DEVICE(0x0c45, 0x603a), BS(SN9C102P, OV7648)}, */
+ {USB_DEVICE(0x0c45, 0x6040), BS(SN9C102P, HV7131R)},
+/* {USB_DEVICE(0x0c45, 0x607a), BS(SN9C102P, OV7648)}, */
+/* {USB_DEVICE(0x0c45, 0x607b), BS(SN9C102P, OV7660)}, */
+ {USB_DEVICE(0x0c45, 0x607c), BS(SN9C102P, HV7131R)},
+/* {USB_DEVICE(0x0c45, 0x607e), BS(SN9C102P, OV7630)}, */
+ {USB_DEVICE(0x0c45, 0x60c0), BS(SN9C105, MI0360)},
+/* {USB_DEVICE(0x0c45, 0x60c2), BS(SN9C105, P1030xC)}, */
+/* {USB_DEVICE(0x0c45, 0x60c8), BS(SN9C105, OM6802)}, */
+/* {USB_DEVICE(0x0c45, 0x60cc), BS(SN9C105, HV7131GP)}, */
+ {USB_DEVICE(0x0c45, 0x60ec), BS(SN9C105, MO4000)},
+/* {USB_DEVICE(0x0c45, 0x60ef), BS(SN9C105, ICM105C)}, */
+/* {USB_DEVICE(0x0c45, 0x60fa), BS(SN9C105, OV7648)}, */
+ {USB_DEVICE(0x0c45, 0x60fb), BS(SN9C105, OV7660)},
#if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE
- {USB_DEVICE(0x0c45, 0x60fc), BSI(SN9C105, HV7131R, 0x11)},
- {USB_DEVICE(0x0c45, 0x60fe), BSI(SN9C105, OV7630, 0x21)},
+ {USB_DEVICE(0x0c45, 0x60fc), BS(SN9C105, HV7131R)},
+ {USB_DEVICE(0x0c45, 0x60fe), BS(SN9C105, OV7630)},
#endif
- {USB_DEVICE(0x0c45, 0x6100), BSI(SN9C120, MI0360, 0x5d)}, /*sn9c128*/
-/* {USB_DEVICE(0x0c45, 0x6102), BSI(SN9C120, PO2030N, ??)}, */
-/* {USB_DEVICE(0x0c45, 0x6108), BSI(SN9C120, OM6802, 0x21)}, */
- {USB_DEVICE(0x0c45, 0x610a), BSI(SN9C120, OV7648, 0x21)}, /*sn9c128*/
- {USB_DEVICE(0x0c45, 0x610b), BSI(SN9C120, OV7660, 0x21)}, /*sn9c128*/
- {USB_DEVICE(0x0c45, 0x610c), BSI(SN9C120, HV7131R, 0x11)}, /*sn9c128*/
- {USB_DEVICE(0x0c45, 0x610e), BSI(SN9C120, OV7630, 0x21)}, /*sn9c128*/
-/* {USB_DEVICE(0x0c45, 0x6122), BSI(SN9C110, ICM105C, 0x??)}, */
-/* {USB_DEVICE(0x0c45, 0x6123), BSI(SN9C110, SanyoCCD, 0x??)}, */
- {USB_DEVICE(0x0c45, 0x6128), BSI(SN9C110, OM6802, 0x21)}, /*sn9c325?*/
+ {USB_DEVICE(0x0c45, 0x6100), BS(SN9C120, MI0360)}, /*sn9c128*/
+/* {USB_DEVICE(0x0c45, 0x6102), BS(SN9C120, P1030xC)}, */
+/* {USB_DEVICE(0x0c45, 0x6108), BS(SN9C120, OM6802)}, */
+ {USB_DEVICE(0x0c45, 0x610a), BS(SN9C120, OV7648)}, /*sn9c128*/
+ {USB_DEVICE(0x0c45, 0x610b), BS(SN9C120, OV7660)}, /*sn9c128*/
+ {USB_DEVICE(0x0c45, 0x610c), BS(SN9C120, HV7131R)}, /*sn9c128*/
+ {USB_DEVICE(0x0c45, 0x610e), BS(SN9C120, OV7630)}, /*sn9c128*/
+/* {USB_DEVICE(0x0c45, 0x610f), BS(SN9C120, S5K53BEB)}, */
+/* {USB_DEVICE(0x0c45, 0x6122), BS(SN9C110, ICM105C)}, */
+/* {USB_DEVICE(0x0c45, 0x6123), BS(SN9C110, SanyoCCD)}, */
+ {USB_DEVICE(0x0c45, 0x6128), BS(SN9C120, OM6802)}, /*sn9c325?*/
/*bw600.inf:*/
- {USB_DEVICE(0x0c45, 0x612a), BSI(SN9C120, OV7648, 0x21)}, /*sn9c110?*/
- {USB_DEVICE(0x0c45, 0x612c), BSI(SN9C110, MO4000, 0x21)},
- {USB_DEVICE(0x0c45, 0x612e), BSI(SN9C110, OV7630, 0x21)},
-/* {USB_DEVICE(0x0c45, 0x612f), BSI(SN9C110, ICM105C, 0x??)}, */
+ {USB_DEVICE(0x0c45, 0x612a), BS(SN9C120, OV7648)}, /*sn9c325?*/
+ {USB_DEVICE(0x0c45, 0x612c), BS(SN9C110, MO4000)},
+ {USB_DEVICE(0x0c45, 0x612e), BS(SN9C110, OV7630)},
+/* {USB_DEVICE(0x0c45, 0x612f), BS(SN9C110, ICM105C)}, */
#if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE
- {USB_DEVICE(0x0c45, 0x6130), BSI(SN9C120, MI0360, 0x5d)},
+ {USB_DEVICE(0x0c45, 0x6130), BS(SN9C120, MI0360)},
#endif
-/* {USB_DEVICE(0x0c45, 0x6132), BSI(SN9C120, OV7670, 0x21)}, */
- {USB_DEVICE(0x0c45, 0x6138), BSI(SN9C120, MO4000, 0x21)},
- {USB_DEVICE(0x0c45, 0x613a), BSI(SN9C120, OV7648, 0x21)},
+/* {USB_DEVICE(0x0c45, 0x6132), BS(SN9C120, OV7670)}, */
+ {USB_DEVICE(0x0c45, 0x6138), BS(SN9C120, MO4000)},
+ {USB_DEVICE(0x0c45, 0x613a), BS(SN9C120, OV7648)},
#if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE
- {USB_DEVICE(0x0c45, 0x613b), BSI(SN9C120, OV7660, 0x21)},
+ {USB_DEVICE(0x0c45, 0x613b), BS(SN9C120, OV7660)},
#endif
- {USB_DEVICE(0x0c45, 0x613c), BSI(SN9C120, HV7131R, 0x11)},
- {USB_DEVICE(0x0c45, 0x613e), BSI(SN9C120, OV7630, 0x21)},
-/* {USB_DEVICE(0x0c45, 0x6142), BSI(SN9C120, PO2030N, ??)}, *sn9c120b*/
- {USB_DEVICE(0x0c45, 0x6143), BSI(SN9C120, SP80708, 0x18)}, /*sn9c120b*/
- {USB_DEVICE(0x0c45, 0x6148), BSI(SN9C120, OM6802, 0x21)}, /*sn9c120b*/
+ {USB_DEVICE(0x0c45, 0x613c), BS(SN9C120, HV7131R)},
+ {USB_DEVICE(0x0c45, 0x613e), BS(SN9C120, OV7630)},
+/* {USB_DEVICE(0x0c45, 0x6142), BS(SN9C120, PO2030N)}, *sn9c120b*/
+ {USB_DEVICE(0x0c45, 0x6143), BS(SN9C120, SP80708)}, /*sn9c120b*/
+ {USB_DEVICE(0x0c45, 0x6148), BS(SN9C120, OM6802)}, /*sn9c120b*/
{}
};
MODULE_DEVICE_TABLE(usb, device_table);
diff --git a/drivers/media/video/gspca/spca500.c b/drivers/media/video/gspca/spca500.c
index fab7ef8..fe46868 100644
--- a/drivers/media/video/gspca/spca500.c
+++ b/drivers/media/video/gspca/spca500.c
@@ -589,7 +589,7 @@
int err;
__u8 Data;
- /* some unknow command from Aiptek pocket dv and family300 */
+ /* some unknown command from Aiptek pocket dv and family300 */
reg_w(gspca_dev, 0x00, 0x0d01, 0x01);
reg_w(gspca_dev, 0x00, 0x0d03, 0x00);
@@ -899,8 +899,7 @@
}
static void sd_pkt_scan(struct gspca_dev *gspca_dev,
- struct gspca_frame *frame, /* target */
- __u8 *data, /* isoc packet */
+ u8 *data, /* isoc packet */
int len) /* iso packet length */
{
struct sd *sd = (struct sd *) gspca_dev;
@@ -913,11 +912,11 @@
/* gspca_dev->last_packet_type = DISCARD_PACKET; */
return;
}
- frame = gspca_frame_add(gspca_dev, LAST_PACKET, frame,
+ gspca_frame_add(gspca_dev, LAST_PACKET,
ffd9, 2);
/* put the JPEG header in the new frame */
- gspca_frame_add(gspca_dev, FIRST_PACKET, frame,
+ gspca_frame_add(gspca_dev, FIRST_PACKET,
sd->jpeg_hdr, JPEG_HDR_SZ);
data += SPCA500_OFFSET_DATA;
@@ -931,7 +930,7 @@
i = 0;
do {
if (data[i] == 0xff) {
- gspca_frame_add(gspca_dev, INTER_PACKET, frame,
+ gspca_frame_add(gspca_dev, INTER_PACKET,
data, i + 1);
len -= i;
data += i;
@@ -940,7 +939,7 @@
}
i++;
} while (i < len);
- gspca_frame_add(gspca_dev, INTER_PACKET, frame, data, len);
+ gspca_frame_add(gspca_dev, INTER_PACKET, data, len);
}
static void setbrightness(struct gspca_dev *gspca_dev)
diff --git a/drivers/media/video/gspca/spca501.c b/drivers/media/video/gspca/spca501.c
index b74a342..6761a30 100644
--- a/drivers/media/video/gspca/spca501.c
+++ b/drivers/media/video/gspca/spca501.c
@@ -1636,7 +1636,7 @@
{}
};
-/* Unknow camera from Ori Usbid 0x0000:0x0000 */
+/* Unknown camera from Ori Usbid 0x0000:0x0000 */
/* Based on snoops from Ori Cohen */
static const __u16 spca501c_mysterious_open_data[][3] = {
{0x02, 0x000f, 0x0005},
@@ -1945,7 +1945,7 @@
goto error;
break;
case MystFromOriUnknownCamera:
- /* UnKnow Ori CMOS Camera data */
+ /* Unknown Ori CMOS Camera data */
if (write_vector(gspca_dev, spca501c_mysterious_open_data))
goto error;
break;
@@ -1978,7 +1978,7 @@
write_vector(gspca_dev, spca501c_arowana_open_data);
break;
case MystFromOriUnknownCamera:
- /* UnKnow CMOS Camera data */
+ /* Unknown CMOS Camera data */
write_vector(gspca_dev, spca501c_mysterious_init_data);
break;
default:
@@ -2032,20 +2032,15 @@
}
static void sd_pkt_scan(struct gspca_dev *gspca_dev,
- struct gspca_frame *frame, /* target */
- __u8 *data, /* isoc packet */
+ u8 *data, /* isoc packet */
int len) /* iso packet length */
{
switch (data[0]) {
case 0: /* start of frame */
- frame = gspca_frame_add(gspca_dev,
- LAST_PACKET,
- frame,
- data, 0);
+ gspca_frame_add(gspca_dev, LAST_PACKET, NULL, 0);
data += SPCA501_OFFSET_DATA;
len -= SPCA501_OFFSET_DATA;
- gspca_frame_add(gspca_dev, FIRST_PACKET, frame,
- data, len);
+ gspca_frame_add(gspca_dev, FIRST_PACKET, data, len);
return;
case 0xff: /* drop */
/* gspca_dev->last_packet_type = DISCARD_PACKET; */
@@ -2053,8 +2048,7 @@
}
data++;
len--;
- gspca_frame_add(gspca_dev, INTER_PACKET, frame,
- data, len);
+ gspca_frame_add(gspca_dev, INTER_PACKET, data, len);
}
static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val)
diff --git a/drivers/media/video/gspca/spca505.c b/drivers/media/video/gspca/spca505.c
index ea8c9fe..0f9232f 100644
--- a/drivers/media/video/gspca/spca505.c
+++ b/drivers/media/video/gspca/spca505.c
@@ -739,26 +739,22 @@
}
static void sd_pkt_scan(struct gspca_dev *gspca_dev,
- struct gspca_frame *frame, /* target */
u8 *data, /* isoc packet */
int len) /* iso packet length */
{
switch (data[0]) {
case 0: /* start of frame */
- frame = gspca_frame_add(gspca_dev, LAST_PACKET, frame,
- data, 0);
+ gspca_frame_add(gspca_dev, LAST_PACKET, NULL, 0);
data += SPCA50X_OFFSET_DATA;
len -= SPCA50X_OFFSET_DATA;
- gspca_frame_add(gspca_dev, FIRST_PACKET, frame,
- data, len);
+ gspca_frame_add(gspca_dev, FIRST_PACKET, data, len);
break;
case 0xff: /* drop */
break;
default:
data += 1;
len -= 1;
- gspca_frame_add(gspca_dev, INTER_PACKET, frame,
- data, len);
+ gspca_frame_add(gspca_dev, INTER_PACKET, data, len);
break;
}
}
diff --git a/drivers/media/video/gspca/spca506.c b/drivers/media/video/gspca/spca506.c
index a199298..ab28cc2 100644
--- a/drivers/media/video/gspca/spca506.c
+++ b/drivers/media/video/gspca/spca506.c
@@ -543,18 +543,15 @@
}
static void sd_pkt_scan(struct gspca_dev *gspca_dev,
- struct gspca_frame *frame, /* target */
- __u8 *data, /* isoc packet */
+ u8 *data, /* isoc packet */
int len) /* iso packet length */
{
switch (data[0]) {
case 0: /* start of frame */
- frame = gspca_frame_add(gspca_dev, LAST_PACKET, frame,
- data, 0);
+ gspca_frame_add(gspca_dev, LAST_PACKET, NULL, 0);
data += SPCA50X_OFFSET_DATA;
len -= SPCA50X_OFFSET_DATA;
- gspca_frame_add(gspca_dev, FIRST_PACKET, frame,
- data, len);
+ gspca_frame_add(gspca_dev, FIRST_PACKET, data, len);
break;
case 0xff: /* drop */
/* gspca_dev->last_packet_type = DISCARD_PACKET; */
@@ -562,8 +559,7 @@
default:
data += 1;
len -= 1;
- gspca_frame_add(gspca_dev, INTER_PACKET, frame,
- data, len);
+ gspca_frame_add(gspca_dev, INTER_PACKET, data, len);
break;
}
}
diff --git a/drivers/media/video/gspca/spca508.c b/drivers/media/video/gspca/spca508.c
index 9696c4c..4d8e6cf 100644
--- a/drivers/media/video/gspca/spca508.c
+++ b/drivers/media/video/gspca/spca508.c
@@ -1447,26 +1447,22 @@
}
static void sd_pkt_scan(struct gspca_dev *gspca_dev,
- struct gspca_frame *frame, /* target */
u8 *data, /* isoc packet */
int len) /* iso packet length */
{
switch (data[0]) {
case 0: /* start of frame */
- frame = gspca_frame_add(gspca_dev, LAST_PACKET, frame,
- data, 0);
+ gspca_frame_add(gspca_dev, LAST_PACKET, NULL, 0);
data += SPCA508_OFFSET_DATA;
len -= SPCA508_OFFSET_DATA;
- gspca_frame_add(gspca_dev, FIRST_PACKET, frame,
- data, len);
+ gspca_frame_add(gspca_dev, FIRST_PACKET, data, len);
break;
case 0xff: /* drop */
break;
default:
data += 1;
len -= 1;
- gspca_frame_add(gspca_dev, INTER_PACKET, frame,
- data, len);
+ gspca_frame_add(gspca_dev, INTER_PACKET, data, len);
break;
}
}
diff --git a/drivers/media/video/gspca/spca561.c b/drivers/media/video/gspca/spca561.c
index 27e82b3..58c2f00 100644
--- a/drivers/media/video/gspca/spca561.c
+++ b/drivers/media/video/gspca/spca561.c
@@ -779,8 +779,7 @@
}
static void sd_pkt_scan(struct gspca_dev *gspca_dev,
- struct gspca_frame *frame, /* target */
- __u8 *data, /* isoc packet */
+ u8 *data, /* isoc packet */
int len) /* iso packet length */
{
struct sd *sd = (struct sd *) gspca_dev;
@@ -788,12 +787,10 @@
len--;
switch (*data++) { /* sequence number */
case 0: /* start of frame */
- frame = gspca_frame_add(gspca_dev, LAST_PACKET, frame,
- data, 0);
+ gspca_frame_add(gspca_dev, LAST_PACKET, NULL, 0);
if (data[1] & 0x10) {
/* compressed bayer */
- gspca_frame_add(gspca_dev, FIRST_PACKET,
- frame, data, len);
+ gspca_frame_add(gspca_dev, FIRST_PACKET, data, len);
} else {
/* raw bayer (with a header, which we skip) */
if (sd->chip_revision == Rev012A) {
@@ -803,14 +800,13 @@
data += 16;
len -= 16;
}
- gspca_frame_add(gspca_dev, FIRST_PACKET,
- frame, data, len);
+ gspca_frame_add(gspca_dev, FIRST_PACKET, data, len);
}
return;
case 0xff: /* drop (empty mpackets) */
return;
}
- gspca_frame_add(gspca_dev, INTER_PACKET, frame, data, len);
+ gspca_frame_add(gspca_dev, INTER_PACKET, data, len);
}
/* rev 72a only */
diff --git a/drivers/media/video/gspca/sq905.c b/drivers/media/video/gspca/sq905.c
index 715a68f..1fcaca6 100644
--- a/drivers/media/video/gspca/sq905.c
+++ b/drivers/media/video/gspca/sq905.c
@@ -168,18 +168,22 @@
* request and read a block of data - see warning on sq905_command.
*/
static int
-sq905_read_data(struct gspca_dev *gspca_dev, u8 *data, int size)
+sq905_read_data(struct gspca_dev *gspca_dev, u8 *data, int size, int need_lock)
{
int ret;
int act_len;
gspca_dev->usb_buf[0] = '\0';
+ if (need_lock)
+ mutex_lock(&gspca_dev->usb_lock);
ret = usb_control_msg(gspca_dev->dev,
usb_sndctrlpipe(gspca_dev->dev, 0),
USB_REQ_SYNCH_FRAME, /* request */
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
SQ905_BULK_READ, size, gspca_dev->usb_buf,
1, SQ905_CMD_TIMEOUT);
+ if (need_lock)
+ mutex_unlock(&gspca_dev->usb_lock);
if (ret < 0) {
PDEBUG(D_ERR, "%s: usb_control_msg failed (%d)", __func__, ret);
return ret;
@@ -210,11 +214,9 @@
{
struct sd *dev = container_of(work, struct sd, work_struct);
struct gspca_dev *gspca_dev = &dev->gspca_dev;
- struct gspca_frame *frame;
int bytes_left; /* bytes remaining in current frame. */
int data_len; /* size to use for the next read. */
int header_read; /* true if we have already read the frame header. */
- int discarding; /* true if we failed to get space for frame. */
int packet_type;
int frame_sz;
int ret;
@@ -222,7 +224,6 @@
u8 *buffer;
buffer = kmalloc(SQ905_MAX_TRANSFER, GFP_KERNEL | GFP_DMA);
- mutex_lock(&gspca_dev->usb_lock);
if (!buffer) {
PDEBUG(D_ERR, "Couldn't allocate USB buffer");
goto quit_stream;
@@ -232,28 +233,22 @@
+ FRAME_HEADER_LEN;
while (gspca_dev->present && gspca_dev->streaming) {
- /* Need a short delay to ensure streaming flag was set by
- * gspca and to make sure gspca can grab the mutex. */
- mutex_unlock(&gspca_dev->usb_lock);
- msleep(1);
-
/* request some data and then read it until we have
* a complete frame. */
bytes_left = frame_sz;
header_read = 0;
- discarding = 0;
- while (bytes_left > 0) {
+ /* Note we do not check for gspca_dev->streaming here, as
+ we must finish reading an entire frame, otherwise the
+ next time we stream we start reading in the middle of a
+ frame. */
+ while (bytes_left > 0 && gspca_dev->present) {
data_len = bytes_left > SQ905_MAX_TRANSFER ?
SQ905_MAX_TRANSFER : bytes_left;
- mutex_lock(&gspca_dev->usb_lock);
- if (!gspca_dev->present)
- goto quit_stream;
- ret = sq905_read_data(gspca_dev, buffer, data_len);
+ ret = sq905_read_data(gspca_dev, buffer, data_len, 1);
if (ret < 0)
goto quit_stream;
- mutex_unlock(&gspca_dev->usb_lock);
- PDEBUG(D_STREAM,
+ PDEBUG(D_PACK,
"Got %d bytes out of %d for frame",
data_len, bytes_left);
bytes_left -= data_len;
@@ -270,34 +265,30 @@
} else {
packet_type = INTER_PACKET;
}
- frame = gspca_get_i_frame(gspca_dev);
- if (frame && !discarding) {
- frame = gspca_frame_add(gspca_dev, packet_type,
- frame, data, data_len);
- /* If entire frame fits in one packet we still
- need to add a LAST_PACKET */
- if (packet_type == FIRST_PACKET &&
- bytes_left == 0)
- frame = gspca_frame_add(gspca_dev,
- LAST_PACKET,
- frame, data, 0);
- } else {
- discarding = 1;
- }
+ gspca_frame_add(gspca_dev, packet_type,
+ data, data_len);
+ /* If entire frame fits in one packet we still
+ need to add a LAST_PACKET */
+ if (packet_type == FIRST_PACKET &&
+ bytes_left == 0)
+ gspca_frame_add(gspca_dev, LAST_PACKET,
+ NULL, 0);
}
- /* acknowledge the frame */
- mutex_lock(&gspca_dev->usb_lock);
- if (!gspca_dev->present)
- goto quit_stream;
- ret = sq905_ack_frame(gspca_dev);
- if (ret < 0)
- goto quit_stream;
+ if (gspca_dev->present) {
+ /* acknowledge the frame */
+ mutex_lock(&gspca_dev->usb_lock);
+ ret = sq905_ack_frame(gspca_dev);
+ mutex_unlock(&gspca_dev->usb_lock);
+ if (ret < 0)
+ goto quit_stream;
+ }
}
quit_stream:
- /* the usb_lock is already acquired */
- if (gspca_dev->present)
+ if (gspca_dev->present) {
+ mutex_lock(&gspca_dev->usb_lock);
sq905_command(gspca_dev, SQ905_CLEAR);
- mutex_unlock(&gspca_dev->usb_lock);
+ mutex_unlock(&gspca_dev->usb_lock);
+ }
kfree(buffer);
}
@@ -346,7 +337,7 @@
ret = sq905_command(gspca_dev, SQ905_ID);
if (ret < 0)
return ret;
- ret = sq905_read_data(gspca_dev, gspca_dev->usb_buf, 4);
+ ret = sq905_read_data(gspca_dev, gspca_dev->usb_buf, 4, 0);
if (ret < 0)
return ret;
/* usb_buf is allocated with kmalloc so is aligned.
diff --git a/drivers/media/video/gspca/sq905c.c b/drivers/media/video/gspca/sq905c.c
index 9168925..d70b156 100644
--- a/drivers/media/video/gspca/sq905c.c
+++ b/drivers/media/video/gspca/sq905c.c
@@ -115,11 +115,9 @@
{
struct sd *dev = container_of(work, struct sd, work_struct);
struct gspca_dev *gspca_dev = &dev->gspca_dev;
- struct gspca_frame *frame;
int bytes_left; /* bytes remaining in current frame. */
int data_len; /* size to use for the next read. */
int act_len;
- int discarding = 0; /* true if we failed to get space for frame. */
int packet_type;
int ret;
u8 *buffer;
@@ -131,8 +129,6 @@
}
while (gspca_dev->present && gspca_dev->streaming) {
- if (!gspca_dev->present)
- goto quit_stream;
/* Request the header, which tells the size to download */
ret = usb_bulk_msg(gspca_dev->dev,
usb_rcvbulkpipe(gspca_dev->dev, 0x81),
@@ -149,17 +145,11 @@
PDEBUG(D_STREAM, "bytes_left = 0x%x", bytes_left);
/* We keep the header. It has other information, too. */
packet_type = FIRST_PACKET;
- frame = gspca_get_i_frame(gspca_dev);
- if (frame && !discarding) {
- gspca_frame_add(gspca_dev, packet_type,
- frame, buffer, FRAME_HEADER_LEN);
- } else
- discarding = 1;
- while (bytes_left > 0) {
+ gspca_frame_add(gspca_dev, packet_type,
+ buffer, FRAME_HEADER_LEN);
+ while (bytes_left > 0 && gspca_dev->present) {
data_len = bytes_left > SQ905C_MAX_TRANSFER ?
SQ905C_MAX_TRANSFER : bytes_left;
- if (!gspca_dev->present)
- goto quit_stream;
ret = usb_bulk_msg(gspca_dev->dev,
usb_rcvbulkpipe(gspca_dev->dev, 0x81),
buffer, data_len, &act_len,
@@ -174,19 +164,16 @@
packet_type = LAST_PACKET;
else
packet_type = INTER_PACKET;
- frame = gspca_get_i_frame(gspca_dev);
- if (frame && !discarding)
- gspca_frame_add(gspca_dev, packet_type,
- frame, buffer, data_len);
- else
- discarding = 1;
+ gspca_frame_add(gspca_dev, packet_type,
+ buffer, data_len);
}
}
quit_stream:
- mutex_lock(&gspca_dev->usb_lock);
- if (gspca_dev->present)
+ if (gspca_dev->present) {
+ mutex_lock(&gspca_dev->usb_lock);
sq905c_command(gspca_dev, SQ905C_CLEAR, 0);
- mutex_unlock(&gspca_dev->usb_lock);
+ mutex_unlock(&gspca_dev->usb_lock);
+ }
kfree(buffer);
}
diff --git a/drivers/media/video/gspca/stk014.c b/drivers/media/video/gspca/stk014.c
index 4762896..8e23320 100644
--- a/drivers/media/video/gspca/stk014.c
+++ b/drivers/media/video/gspca/stk014.c
@@ -418,8 +418,7 @@
}
static void sd_pkt_scan(struct gspca_dev *gspca_dev,
- struct gspca_frame *frame, /* target */
- __u8 *data, /* isoc packet */
+ u8 *data, /* isoc packet */
int len) /* iso packet length */
{
struct sd *sd = (struct sd *) gspca_dev;
@@ -435,11 +434,11 @@
* (without ending - ff d9)
*/
if (data[0] == 0xff && data[1] == 0xfe) {
- frame = gspca_frame_add(gspca_dev, LAST_PACKET, frame,
- ffd9, 2);
+ gspca_frame_add(gspca_dev, LAST_PACKET,
+ ffd9, 2);
/* put the JPEG 411 header */
- gspca_frame_add(gspca_dev, FIRST_PACKET, frame,
+ gspca_frame_add(gspca_dev, FIRST_PACKET,
sd->jpeg_hdr, JPEG_HDR_SZ);
/* beginning of the frame */
@@ -447,7 +446,7 @@
data += STKHDRSZ;
len -= STKHDRSZ;
}
- gspca_frame_add(gspca_dev, INTER_PACKET, frame, data, len);
+ gspca_frame_add(gspca_dev, INTER_PACKET, data, len);
}
static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val)
diff --git a/drivers/media/video/gspca/stv0680.c b/drivers/media/video/gspca/stv0680.c
new file mode 100644
index 0000000..2a69d7c
--- /dev/null
+++ b/drivers/media/video/gspca/stv0680.c
@@ -0,0 +1,364 @@
+/*
+ * STV0680 USB Camera Driver
+ *
+ * Copyright (C) 2009 Hans de Goede <hdgoede@redhat.com>
+ *
+ * This module is adapted from the in kernel v4l1 stv680 driver:
+ *
+ * STV0680 USB Camera Driver, by Kevin Sisson (kjsisson@bellsouth.net)
+ *
+ * Thanks to STMicroelectronics for information on the usb commands, and
+ * to Steve Miller at STM for his help and encouragement while I was
+ * writing this driver.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#define MODULE_NAME "stv0680"
+
+#include "gspca.h"
+
+MODULE_AUTHOR("Hans de Goede <hdgoede@redhat.com>");
+MODULE_DESCRIPTION("STV0680 USB Camera Driver");
+MODULE_LICENSE("GPL");
+
+/* specific webcam descriptor */
+struct sd {
+ struct gspca_dev gspca_dev; /* !! must be the first item */
+ struct v4l2_pix_format mode;
+ u8 orig_mode;
+ u8 video_mode;
+ u8 current_mode;
+};
+
+/* V4L2 controls supported by the driver */
+static struct ctrl sd_ctrls[] = {
+};
+
+static int stv_sndctrl(struct gspca_dev *gspca_dev, int set, u8 req, u16 val,
+ int size)
+{
+ int ret = -1;
+ u8 req_type = 0;
+
+ switch (set) {
+ case 0: /* 0xc1 */
+ req_type = USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT;
+ break;
+ case 1: /* 0x41 */
+ req_type = USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT;
+ break;
+ case 2: /* 0x80 */
+ req_type = USB_DIR_IN | USB_RECIP_DEVICE;
+ break;
+ case 3: /* 0x40 */
+ req_type = USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE;
+ break;
+ }
+
+ ret = usb_control_msg(gspca_dev->dev,
+ usb_rcvctrlpipe(gspca_dev->dev, 0),
+ req, req_type,
+ val, 0, gspca_dev->usb_buf, size, 500);
+
+ if ((ret < 0) && (req != 0x0a))
+ PDEBUG(D_ERR,
+ "usb_control_msg error %i, request = 0x%x, error = %i",
+ set, req, ret);
+
+ return ret;
+}
+
+static int stv0680_handle_error(struct gspca_dev *gspca_dev, int ret)
+{
+ stv_sndctrl(gspca_dev, 0, 0x80, 0, 0x02); /* Get Last Error */
+ PDEBUG(D_ERR, "last error: %i, command = 0x%x",
+ gspca_dev->usb_buf[0], gspca_dev->usb_buf[1]);
+ return ret;
+}
+
+static int stv0680_get_video_mode(struct gspca_dev *gspca_dev)
+{
+ /* Note not sure if this init of usb_buf is really necessary */
+ memset(gspca_dev->usb_buf, 0, 8);
+ gspca_dev->usb_buf[0] = 0x0f;
+
+ if (stv_sndctrl(gspca_dev, 0, 0x87, 0, 0x08) != 0x08) {
+ PDEBUG(D_ERR, "Get_Camera_Mode failed");
+ return stv0680_handle_error(gspca_dev, -EIO);
+ }
+
+ return gspca_dev->usb_buf[0]; /* 01 = VGA, 03 = QVGA, 00 = CIF */
+}
+
+static int stv0680_set_video_mode(struct gspca_dev *gspca_dev, u8 mode)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ if (sd->current_mode == mode)
+ return 0;
+
+ memset(gspca_dev->usb_buf, 0, 8);
+ gspca_dev->usb_buf[0] = mode;
+
+ if (stv_sndctrl(gspca_dev, 3, 0x07, 0x0100, 0x08) != 0x08) {
+ PDEBUG(D_ERR, "Set_Camera_Mode failed");
+ return stv0680_handle_error(gspca_dev, -EIO);
+ }
+
+ /* Verify we got what we've asked for */
+ if (stv0680_get_video_mode(gspca_dev) != mode) {
+ PDEBUG(D_ERR, "Error setting camera video mode!");
+ return -EIO;
+ }
+
+ sd->current_mode = mode;
+
+ return 0;
+}
+
+/* this function is called at probe time */
+static int sd_config(struct gspca_dev *gspca_dev,
+ const struct usb_device_id *id)
+{
+ int ret;
+ struct sd *sd = (struct sd *) gspca_dev;
+ struct cam *cam = &gspca_dev->cam;
+
+ /* ping camera to be sure STV0680 is present */
+ if (stv_sndctrl(gspca_dev, 0, 0x88, 0x5678, 0x02) != 0x02 ||
+ gspca_dev->usb_buf[0] != 0x56 || gspca_dev->usb_buf[1] != 0x78) {
+ PDEBUG(D_ERR, "STV(e): camera ping failed!!");
+ return stv0680_handle_error(gspca_dev, -ENODEV);
+ }
+
+ /* get camera descriptor */
+ if (stv_sndctrl(gspca_dev, 2, 0x06, 0x0200, 0x09) != 0x09)
+ return stv0680_handle_error(gspca_dev, -ENODEV);
+
+ if (stv_sndctrl(gspca_dev, 2, 0x06, 0x0200, 0x22) != 0x22 ||
+ gspca_dev->usb_buf[7] != 0xa0 || gspca_dev->usb_buf[8] != 0x23) {
+ PDEBUG(D_ERR, "Could not get descriptor 0200.");
+ return stv0680_handle_error(gspca_dev, -ENODEV);
+ }
+ if (stv_sndctrl(gspca_dev, 0, 0x8a, 0, 0x02) != 0x02)
+ return stv0680_handle_error(gspca_dev, -ENODEV);
+ if (stv_sndctrl(gspca_dev, 0, 0x8b, 0, 0x24) != 0x24)
+ return stv0680_handle_error(gspca_dev, -ENODEV);
+ if (stv_sndctrl(gspca_dev, 0, 0x85, 0, 0x10) != 0x10)
+ return stv0680_handle_error(gspca_dev, -ENODEV);
+
+ if (!(gspca_dev->usb_buf[7] & 0x09)) {
+ PDEBUG(D_ERR, "Camera supports neither CIF nor QVGA mode");
+ return -ENODEV;
+ }
+ if (gspca_dev->usb_buf[7] & 0x01)
+ PDEBUG(D_PROBE, "Camera supports CIF mode");
+ if (gspca_dev->usb_buf[7] & 0x02)
+ PDEBUG(D_PROBE, "Camera supports VGA mode");
+ if (gspca_dev->usb_buf[7] & 0x08)
+ PDEBUG(D_PROBE, "Camera supports QVGA mode");
+
+ if (gspca_dev->usb_buf[7] & 0x01)
+ sd->video_mode = 0x00; /* CIF */
+ else
+ sd->video_mode = 0x03; /* QVGA */
+
+ /* FW rev, ASIC rev, sensor ID */
+ PDEBUG(D_PROBE, "Firmware rev is %i.%i",
+ gspca_dev->usb_buf[0], gspca_dev->usb_buf[1]);
+ PDEBUG(D_PROBE, "ASIC rev is %i.%i",
+ gspca_dev->usb_buf[2], gspca_dev->usb_buf[3]);
+ PDEBUG(D_PROBE, "Sensor ID is %i",
+ (gspca_dev->usb_buf[4]*16) + (gspca_dev->usb_buf[5]>>4));
+
+
+ ret = stv0680_get_video_mode(gspca_dev);
+ if (ret < 0)
+ return ret;
+ sd->current_mode = sd->orig_mode = ret;
+
+ ret = stv0680_set_video_mode(gspca_dev, sd->video_mode);
+ if (ret < 0)
+ return ret;
+
+ /* Get mode details */
+ if (stv_sndctrl(gspca_dev, 0, 0x8f, 0, 0x10) != 0x10)
+ return stv0680_handle_error(gspca_dev, -EIO);
+
+ cam->bulk = 1;
+ cam->bulk_nurbs = 1; /* The cam cannot handle more */
+ cam->bulk_size = (gspca_dev->usb_buf[0] << 24) |
+ (gspca_dev->usb_buf[1] << 16) |
+ (gspca_dev->usb_buf[2] << 8) |
+ (gspca_dev->usb_buf[3]);
+ sd->mode.width = (gspca_dev->usb_buf[4] << 8) |
+ (gspca_dev->usb_buf[5]); /* 322, 356, 644 */
+ sd->mode.height = (gspca_dev->usb_buf[6] << 8) |
+ (gspca_dev->usb_buf[7]); /* 242, 292, 484 */
+ sd->mode.pixelformat = V4L2_PIX_FMT_STV0680;
+ sd->mode.field = V4L2_FIELD_NONE;
+ sd->mode.bytesperline = sd->mode.width;
+ sd->mode.sizeimage = cam->bulk_size;
+ sd->mode.colorspace = V4L2_COLORSPACE_SRGB;
+
+ /* origGain = gspca_dev->usb_buf[12]; */
+
+ cam->cam_mode = &sd->mode;
+ cam->nmodes = 1;
+
+
+ ret = stv0680_set_video_mode(gspca_dev, sd->orig_mode);
+ if (ret < 0)
+ return ret;
+
+ if (stv_sndctrl(gspca_dev, 2, 0x06, 0x0100, 0x12) != 0x12 ||
+ gspca_dev->usb_buf[8] != 0x53 || gspca_dev->usb_buf[9] != 0x05) {
+ PDEBUG(D_ERR, "Could not get descriptor 0100.");
+ return stv0680_handle_error(gspca_dev, -EIO);
+ }
+
+ return 0;
+}
+
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
+{
+ return 0;
+}
+
+/* -- start the camera -- */
+static int sd_start(struct gspca_dev *gspca_dev)
+{
+ int ret;
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ ret = stv0680_set_video_mode(gspca_dev, sd->video_mode);
+ if (ret < 0)
+ return ret;
+
+ if (stv_sndctrl(gspca_dev, 0, 0x85, 0, 0x10) != 0x10)
+ return stv0680_handle_error(gspca_dev, -EIO);
+
+ /* Start stream at:
+ 0x0000 = CIF (352x288)
+ 0x0100 = VGA (640x480)
+ 0x0300 = QVGA (320x240) */
+ if (stv_sndctrl(gspca_dev, 1, 0x09, sd->video_mode << 8, 0x0) != 0x0)
+ return stv0680_handle_error(gspca_dev, -EIO);
+
+ return 0;
+}
+
+static void sd_stopN(struct gspca_dev *gspca_dev)
+{
+ /* This is a high priority command; it stops all lower order cmds */
+ if (stv_sndctrl(gspca_dev, 1, 0x04, 0x0000, 0x0) != 0x0)
+ stv0680_handle_error(gspca_dev, -EIO);
+}
+
+static void sd_stop0(struct gspca_dev *gspca_dev)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ if (!sd->gspca_dev.present)
+ return;
+
+ stv0680_set_video_mode(gspca_dev, sd->orig_mode);
+}
+
+static void sd_pkt_scan(struct gspca_dev *gspca_dev,
+ u8 *data,
+ int len)
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ /* Every now and then the camera sends a 16 byte packet, no idea
+ what it contains, but it is not image data, when this
+ happens the frame received before this packet is corrupt,
+ so discard it. */
+ if (len != sd->mode.sizeimage) {
+ gspca_dev->last_packet_type = DISCARD_PACKET;
+ return;
+ }
+
+ /* Finish the previous frame, we do this upon reception of the next
+ packet, even though it is already complete so that the strange 16
+ byte packets send after a corrupt frame can discard it. */
+ gspca_frame_add(gspca_dev, LAST_PACKET, NULL, 0);
+
+ /* Store the just received frame */
+ gspca_frame_add(gspca_dev, FIRST_PACKET, data, len);
+}
+
+/* sub-driver description */
+static const struct sd_desc sd_desc = {
+ .name = MODULE_NAME,
+ .ctrls = sd_ctrls,
+ .nctrls = ARRAY_SIZE(sd_ctrls),
+ .config = sd_config,
+ .init = sd_init,
+ .start = sd_start,
+ .stopN = sd_stopN,
+ .stop0 = sd_stop0,
+ .pkt_scan = sd_pkt_scan,
+};
+
+/* -- module initialisation -- */
+static const __devinitdata struct usb_device_id device_table[] = {
+ {USB_DEVICE(0x0553, 0x0202)},
+ {USB_DEVICE(0x041e, 0x4007)},
+ {}
+};
+MODULE_DEVICE_TABLE(usb, device_table);
+
+/* -- device connect -- */
+static int sd_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ return gspca_dev_probe(intf, id, &sd_desc, sizeof(struct sd),
+ THIS_MODULE);
+}
+
+static struct usb_driver sd_driver = {
+ .name = MODULE_NAME,
+ .id_table = device_table,
+ .probe = sd_probe,
+ .disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+ .suspend = gspca_suspend,
+ .resume = gspca_resume,
+#endif
+};
+
+/* -- module insert / remove -- */
+static int __init sd_mod_init(void)
+{
+ int ret;
+ ret = usb_register(&sd_driver);
+ if (ret < 0)
+ return ret;
+ PDEBUG(D_PROBE, "registered");
+ return 0;
+}
+static void __exit sd_mod_exit(void)
+{
+ usb_deregister(&sd_driver);
+ PDEBUG(D_PROBE, "deregistered");
+}
+
+module_init(sd_mod_init);
+module_exit(sd_mod_exit);
diff --git a/drivers/media/video/gspca/stv06xx/stv06xx.c b/drivers/media/video/gspca/stv06xx/stv06xx.c
index bfae63f..5d0241b 100644
--- a/drivers/media/video/gspca/stv06xx/stv06xx.c
+++ b/drivers/media/video/gspca/stv06xx/stv06xx.c
@@ -312,8 +312,7 @@
* The 0005 and 0100 chunks seem to appear only in compressed stream.
*/
static void stv06xx_pkt_scan(struct gspca_dev *gspca_dev,
- struct gspca_frame *frame, /* target */
- __u8 *data, /* isoc packet */
+ u8 *data, /* isoc packet */
int len) /* iso packet length */
{
struct sd *sd = (struct sd *) gspca_dev;
@@ -366,7 +365,7 @@
sd->to_skip -= skip;
}
- gspca_frame_add(gspca_dev, INTER_PACKET, frame,
+ gspca_frame_add(gspca_dev, INTER_PACKET,
data, chunk_len);
break;
@@ -378,7 +377,7 @@
/* Create a new frame, chunk length should be zero */
gspca_frame_add(gspca_dev, FIRST_PACKET,
- frame, data, 0);
+ NULL, 0);
if (sd->bridge == BRIDGE_ST6422)
sd->to_skip = gspca_dev->width * 4;
@@ -394,8 +393,8 @@
PDEBUG(D_PACK, "End of frame detected");
/* Complete the last frame (if any) */
- frame = gspca_frame_add(gspca_dev, LAST_PACKET,
- frame, data, 0);
+ gspca_frame_add(gspca_dev, LAST_PACKET,
+ NULL, 0);
if (chunk_len)
PDEBUG(D_ERR, "Chunk length is "
diff --git a/drivers/media/video/gspca/sunplus.c b/drivers/media/video/gspca/sunplus.c
index aa8f995..72bf3b4 100644
--- a/drivers/media/video/gspca/sunplus.c
+++ b/drivers/media/video/gspca/sunplus.c
@@ -631,7 +631,7 @@
count = 200;
while (--count > 0) {
msleep(10);
- /* gsmart mini2 write a each wait setting 1 ms is enought */
+ /* gsmart mini2 write a each wait setting 1 ms is enough */
/* reg_w_riv(dev, req, idx, val); */
status = reg_r_12(gspca_dev, 0x01, 0x0001, 1);
if (status == endcode) {
@@ -1116,7 +1116,6 @@
}
static void sd_pkt_scan(struct gspca_dev *gspca_dev,
- struct gspca_frame *frame, /* target */
u8 *data, /* isoc packet */
int len) /* iso packet length */
{
@@ -1186,11 +1185,11 @@
break;
}
if (sof) { /* start of frame */
- frame = gspca_frame_add(gspca_dev, LAST_PACKET, frame,
- ffd9, 2);
+ gspca_frame_add(gspca_dev, LAST_PACKET,
+ ffd9, 2);
/* put the JPEG header in the new frame */
- gspca_frame_add(gspca_dev, FIRST_PACKET, frame,
+ gspca_frame_add(gspca_dev, FIRST_PACKET,
sd->jpeg_hdr, JPEG_HDR_SZ);
}
@@ -1198,7 +1197,7 @@
i = 0;
do {
if (data[i] == 0xff) {
- gspca_frame_add(gspca_dev, INTER_PACKET, frame,
+ gspca_frame_add(gspca_dev, INTER_PACKET,
data, i + 1);
len -= i;
data += i;
@@ -1207,7 +1206,7 @@
}
i++;
} while (i < len);
- gspca_frame_add(gspca_dev, INTER_PACKET, frame, data, len);
+ gspca_frame_add(gspca_dev, INTER_PACKET, data, len);
}
static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val)
diff --git a/drivers/media/video/gspca/t613.c b/drivers/media/video/gspca/t613.c
index 1d321c3..55ef6a7 100644
--- a/drivers/media/video/gspca/t613.c
+++ b/drivers/media/video/gspca/t613.c
@@ -938,7 +938,6 @@
}
static void sd_pkt_scan(struct gspca_dev *gspca_dev,
- struct gspca_frame *frame, /* target */
u8 *data, /* isoc packet */
int len) /* iso packet length */
{
@@ -956,9 +955,9 @@
/* extra bytes....., could be processed too but would be
* a waste of time, right now leave the application and
* libjpeg do it for ourserlves.. */
- frame = gspca_frame_add(gspca_dev, LAST_PACKET, frame,
+ gspca_frame_add(gspca_dev, LAST_PACKET,
ffd9, 2);
- gspca_frame_add(gspca_dev, FIRST_PACKET, frame, data, len);
+ gspca_frame_add(gspca_dev, FIRST_PACKET, data, len);
return;
}
@@ -967,7 +966,7 @@
* other's do not include it... */
len -= 2;
}
- gspca_frame_add(gspca_dev, INTER_PACKET, frame, data, len);
+ gspca_frame_add(gspca_dev, INTER_PACKET, data, len);
}
static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val)
diff --git a/drivers/media/video/gspca/tv8532.c b/drivers/media/video/gspca/tv8532.c
index 4b44dde..b74a3b6 100644
--- a/drivers/media/video/gspca/tv8532.c
+++ b/drivers/media/video/gspca/tv8532.c
@@ -398,8 +398,7 @@
}
static void sd_pkt_scan(struct gspca_dev *gspca_dev,
- struct gspca_frame *frame, /* target */
- __u8 *data, /* isoc packet */
+ u8 *data, /* isoc packet */
int len) /* iso packet length */
{
struct sd *sd = (struct sd *) gspca_dev;
@@ -424,9 +423,9 @@
* - 4 bytes
*/
gspca_frame_add(gspca_dev, packet_type0,
- frame, data + 2, gspca_dev->width);
+ data + 2, gspca_dev->width);
gspca_frame_add(gspca_dev, packet_type1,
- frame, data + gspca_dev->width + 5, gspca_dev->width);
+ data + gspca_dev->width + 5, gspca_dev->width);
}
static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val)
diff --git a/drivers/media/video/gspca/vc032x.c b/drivers/media/video/gspca/vc032x.c
index 589042f..c090efc 100644
--- a/drivers/media/video/gspca/vc032x.c
+++ b/drivers/media/video/gspca/vc032x.c
@@ -2987,7 +2987,6 @@
}
static void sd_pkt_scan(struct gspca_dev *gspca_dev,
- struct gspca_frame *frame, /* target */
u8 *data, /* isoc packet */
int len) /* iso pkt length */
{
@@ -2996,21 +2995,25 @@
if (data[0] == 0xff && data[1] == 0xd8) {
PDEBUG(D_PACK,
"vc032x header packet found len %d", len);
- frame = gspca_frame_add(gspca_dev, LAST_PACKET, frame,
- data, 0);
+ gspca_frame_add(gspca_dev, LAST_PACKET, NULL, 0);
data += sd->image_offset;
len -= sd->image_offset;
- gspca_frame_add(gspca_dev, FIRST_PACKET, frame,
- data, len);
+ gspca_frame_add(gspca_dev, FIRST_PACKET, data, len);
return;
}
/* The vc0321 sends some additional data after sending the complete
* frame, we ignore this. */
- if (sd->bridge == BRIDGE_VC0321
- && len > frame->v4l2_buf.length - (frame->data_end - frame->data))
- len = frame->v4l2_buf.length - (frame->data_end - frame->data);
- gspca_frame_add(gspca_dev, INTER_PACKET, frame, data, len);
+ if (sd->bridge == BRIDGE_VC0321) {
+ struct gspca_frame *frame;
+ int l;
+
+ frame = gspca_get_i_frame(gspca_dev);
+ l = frame->data_end - frame->data;
+ if (len > frame->v4l2_buf.length - l)
+ len = frame->v4l2_buf.length - l;
+ }
+ gspca_frame_add(gspca_dev, INTER_PACKET, data, len);
}
static int sd_sethflip(struct gspca_dev *gspca_dev, __s32 val)
@@ -3092,6 +3095,8 @@
switch (menu->id) {
case V4L2_CID_POWER_LINE_FREQUENCY:
+ if (menu->index >= ARRAY_SIZE(freq_nm))
+ break;
strcpy((char *) menu->name, freq_nm[menu->index]);
return 0;
}
diff --git a/drivers/media/video/gspca/w996Xcf.c b/drivers/media/video/gspca/w996Xcf.c
new file mode 100644
index 0000000..2fffe20
--- /dev/null
+++ b/drivers/media/video/gspca/w996Xcf.c
@@ -0,0 +1,609 @@
+/**
+ *
+ * GSPCA sub driver for W996[78]CF JPEG USB Dual Mode Camera Chip.
+ *
+ * Copyright (C) 2009 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This module is adapted from the in kernel v4l1 w9968cf driver:
+ *
+ * Copyright (C) 2002-2004 by Luca Risolia <luca.risolia@studio.unibo.it>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+/* Note this is not a stand alone driver, it gets included in ov519.c, this
+ is a bit of a hack, but it needs the driver code for a lot of different
+ ov sensors which is already present in ov519.c (the old v4l1 driver used
+ the ovchipcam framework). When we have the time we really should move
+ the sensor drivers to v4l2 sub drivers, and properly split of this
+ driver from ov519.c */
+
+/* The CONEX_CAM define for jpeg.h needs renaming, now its used here too */
+#define CONEX_CAM
+#include "jpeg.h"
+
+#define W9968CF_I2C_BUS_DELAY 4 /* delay in us for I2C bit r/w operations */
+
+#define Y_QUANTABLE (sd->jpeg_hdr + JPEG_QT0_OFFSET)
+#define UV_QUANTABLE (sd->jpeg_hdr + JPEG_QT1_OFFSET)
+
+static const struct v4l2_pix_format w9968cf_vga_mode[] = {
+ {160, 120, V4L2_PIX_FMT_UYVY, V4L2_FIELD_NONE,
+ .bytesperline = 160 * 2,
+ .sizeimage = 160 * 120 * 2,
+ .colorspace = V4L2_COLORSPACE_JPEG},
+ {176, 144, V4L2_PIX_FMT_UYVY, V4L2_FIELD_NONE,
+ .bytesperline = 176 * 2,
+ .sizeimage = 176 * 144 * 2,
+ .colorspace = V4L2_COLORSPACE_JPEG},
+ {320, 240, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
+ .bytesperline = 320 * 2,
+ .sizeimage = 320 * 240 * 2,
+ .colorspace = V4L2_COLORSPACE_JPEG},
+ {352, 288, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
+ .bytesperline = 352 * 2,
+ .sizeimage = 352 * 288 * 2,
+ .colorspace = V4L2_COLORSPACE_JPEG},
+ {640, 480, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
+ .bytesperline = 640 * 2,
+ .sizeimage = 640 * 480 * 2,
+ .colorspace = V4L2_COLORSPACE_JPEG},
+};
+
+static int reg_w(struct sd *sd, __u16 index, __u16 value);
+
+/*--------------------------------------------------------------------------
+ Write 64-bit data to the fast serial bus registers.
+ Return 0 on success, -1 otherwise.
+ --------------------------------------------------------------------------*/
+static int w9968cf_write_fsb(struct sd *sd, u16* data)
+{
+ struct usb_device* udev = sd->gspca_dev.dev;
+ u16 value;
+ int ret;
+
+ value = *data++;
+ memcpy(sd->gspca_dev.usb_buf, data, 6);
+
+ ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0,
+ USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE,
+ value, 0x06, sd->gspca_dev.usb_buf, 6, 500);
+ if (ret < 0) {
+ PDEBUG(D_ERR, "Write FSB registers failed (%d)", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+/*--------------------------------------------------------------------------
+ Write data to the serial bus control register.
+ Return 0 on success, a negative number otherwise.
+ --------------------------------------------------------------------------*/
+static int w9968cf_write_sb(struct sd *sd, u16 value)
+{
+ int ret;
+
+ /* We don't use reg_w here, as that would cause all writes when
+ bitbanging i2c to be logged, making the logs impossible to read */
+ ret = usb_control_msg(sd->gspca_dev.dev,
+ usb_sndctrlpipe(sd->gspca_dev.dev, 0),
+ 0,
+ USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ value, 0x01, NULL, 0, 500);
+
+ udelay(W9968CF_I2C_BUS_DELAY);
+
+ if (ret < 0) {
+ PDEBUG(D_ERR, "Write SB reg [01] %04x failed", value);
+ return ret;
+ }
+
+ return 0;
+}
+
+/*--------------------------------------------------------------------------
+ Read data from the serial bus control register.
+ Return 0 on success, a negative number otherwise.
+ --------------------------------------------------------------------------*/
+static int w9968cf_read_sb(struct sd *sd)
+{
+ int ret;
+
+ /* We don't use reg_r here, as the w9968cf is special and has 16
+ bit registers instead of 8 bit */
+ ret = usb_control_msg(sd->gspca_dev.dev,
+ usb_rcvctrlpipe(sd->gspca_dev.dev, 0),
+ 1,
+ USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ 0, 0x01, sd->gspca_dev.usb_buf, 2, 500);
+ if (ret >= 0)
+ ret = sd->gspca_dev.usb_buf[0] |
+ (sd->gspca_dev.usb_buf[1] << 8);
+ else
+ PDEBUG(D_ERR, "Read SB reg [01] failed");
+
+ udelay(W9968CF_I2C_BUS_DELAY);
+
+ return ret;
+}
+
+/*--------------------------------------------------------------------------
+ Upload quantization tables for the JPEG compression.
+ This function is called by w9968cf_start_transfer().
+ Return 0 on success, a negative number otherwise.
+ --------------------------------------------------------------------------*/
+static int w9968cf_upload_quantizationtables(struct sd *sd)
+{
+ u16 a, b;
+ int ret = 0, i, j;
+
+ ret += reg_w(sd, 0x39, 0x0010); /* JPEG clock enable */
+
+ for (i = 0, j = 0; i < 32; i++, j += 2) {
+ a = Y_QUANTABLE[j] | ((unsigned)(Y_QUANTABLE[j+1]) << 8);
+ b = UV_QUANTABLE[j] | ((unsigned)(UV_QUANTABLE[j+1]) << 8);
+ ret += reg_w(sd, 0x40+i, a);
+ ret += reg_w(sd, 0x60+i, b);
+ }
+ ret += reg_w(sd, 0x39, 0x0012); /* JPEG encoder enable */
+
+ return ret;
+}
+
+/****************************************************************************
+ * Low-level I2C I/O functions. *
+ * The adapter supports the following I2C transfer functions: *
+ * i2c_adap_fastwrite_byte_data() (at 400 kHz bit frequency only) *
+ * i2c_adap_read_byte_data() *
+ * i2c_adap_read_byte() *
+ ****************************************************************************/
+
+static int w9968cf_smbus_start(struct sd *sd)
+{
+ int ret = 0;
+
+ ret += w9968cf_write_sb(sd, 0x0011); /* SDE=1, SDA=0, SCL=1 */
+ ret += w9968cf_write_sb(sd, 0x0010); /* SDE=1, SDA=0, SCL=0 */
+
+ return ret;
+}
+
+static int w9968cf_smbus_stop(struct sd *sd)
+{
+ int ret = 0;
+
+ ret += w9968cf_write_sb(sd, 0x0010); /* SDE=1, SDA=0, SCL=0 */
+ ret += w9968cf_write_sb(sd, 0x0011); /* SDE=1, SDA=0, SCL=1 */
+ ret += w9968cf_write_sb(sd, 0x0013); /* SDE=1, SDA=1, SCL=1 */
+
+ return ret;
+}
+
+static int w9968cf_smbus_write_byte(struct sd *sd, u8 v)
+{
+ u8 bit;
+ int ret = 0, sda;
+
+ for (bit = 0 ; bit < 8 ; bit++) {
+ sda = (v & 0x80) ? 2 : 0;
+ v <<= 1;
+ /* SDE=1, SDA=sda, SCL=0 */
+ ret += w9968cf_write_sb(sd, 0x10 | sda);
+ /* SDE=1, SDA=sda, SCL=1 */
+ ret += w9968cf_write_sb(sd, 0x11 | sda);
+ /* SDE=1, SDA=sda, SCL=0 */
+ ret += w9968cf_write_sb(sd, 0x10 | sda);
+ }
+
+ return ret;
+}
+
+static int w9968cf_smbus_read_byte(struct sd *sd, u8* v)
+{
+ u8 bit;
+ int ret = 0;
+
+ /* No need to ensure SDA is high as we are always called after
+ read_ack which ends with SDA high */
+ *v = 0;
+ for (bit = 0 ; bit < 8 ; bit++) {
+ *v <<= 1;
+ /* SDE=1, SDA=1, SCL=1 */
+ ret += w9968cf_write_sb(sd, 0x0013);
+ *v |= (w9968cf_read_sb(sd) & 0x0008) ? 1 : 0;
+ /* SDE=1, SDA=1, SCL=0 */
+ ret += w9968cf_write_sb(sd, 0x0012);
+ }
+
+ return ret;
+}
+
+static int w9968cf_smbus_write_nack(struct sd *sd)
+{
+ int ret = 0;
+
+ /* No need to ensure SDA is high as we are always called after
+ read_byte which ends with SDA high */
+ ret += w9968cf_write_sb(sd, 0x0013); /* SDE=1, SDA=1, SCL=1 */
+ ret += w9968cf_write_sb(sd, 0x0012); /* SDE=1, SDA=1, SCL=0 */
+
+ return ret;
+}
+
+static int w9968cf_smbus_read_ack(struct sd *sd)
+{
+ int ret = 0, sda;
+
+ /* Ensure SDA is high before raising clock to avoid a spurious stop */
+ ret += w9968cf_write_sb(sd, 0x0012); /* SDE=1, SDA=1, SCL=0 */
+ ret += w9968cf_write_sb(sd, 0x0013); /* SDE=1, SDA=1, SCL=1 */
+ sda = w9968cf_read_sb(sd);
+ ret += w9968cf_write_sb(sd, 0x0012); /* SDE=1, SDA=1, SCL=0 */
+ if (sda < 0)
+ ret += sda;
+ else if (sda & 0x08) {
+ PDEBUG(D_USBI, "Did not receive i2c ACK");
+ ret += -1;
+ }
+
+ return ret;
+}
+
+/* SMBus protocol: S Addr Wr [A] Subaddr [A] Value [A] P */
+static int w9968cf_i2c_w(struct sd *sd, u8 reg, u8 value)
+{
+ u16* data = (u16 *)sd->gspca_dev.usb_buf;
+ int ret = 0;
+
+ data[0] = 0x082f | ((sd->sensor_addr & 0x80) ? 0x1500 : 0x0);
+ data[0] |= (sd->sensor_addr & 0x40) ? 0x4000 : 0x0;
+ data[1] = 0x2082 | ((sd->sensor_addr & 0x40) ? 0x0005 : 0x0);
+ data[1] |= (sd->sensor_addr & 0x20) ? 0x0150 : 0x0;
+ data[1] |= (sd->sensor_addr & 0x10) ? 0x5400 : 0x0;
+ data[2] = 0x8208 | ((sd->sensor_addr & 0x08) ? 0x0015 : 0x0);
+ data[2] |= (sd->sensor_addr & 0x04) ? 0x0540 : 0x0;
+ data[2] |= (sd->sensor_addr & 0x02) ? 0x5000 : 0x0;
+ data[3] = 0x1d20 | ((sd->sensor_addr & 0x02) ? 0x0001 : 0x0);
+ data[3] |= (sd->sensor_addr & 0x01) ? 0x0054 : 0x0;
+
+ ret += w9968cf_write_fsb(sd, data);
+
+ data[0] = 0x8208 | ((reg & 0x80) ? 0x0015 : 0x0);
+ data[0] |= (reg & 0x40) ? 0x0540 : 0x0;
+ data[0] |= (reg & 0x20) ? 0x5000 : 0x0;
+ data[1] = 0x0820 | ((reg & 0x20) ? 0x0001 : 0x0);
+ data[1] |= (reg & 0x10) ? 0x0054 : 0x0;
+ data[1] |= (reg & 0x08) ? 0x1500 : 0x0;
+ data[1] |= (reg & 0x04) ? 0x4000 : 0x0;
+ data[2] = 0x2082 | ((reg & 0x04) ? 0x0005 : 0x0);
+ data[2] |= (reg & 0x02) ? 0x0150 : 0x0;
+ data[2] |= (reg & 0x01) ? 0x5400 : 0x0;
+ data[3] = 0x001d;
+
+ ret += w9968cf_write_fsb(sd, data);
+
+ data[0] = 0x8208 | ((value & 0x80) ? 0x0015 : 0x0);
+ data[0] |= (value & 0x40) ? 0x0540 : 0x0;
+ data[0] |= (value & 0x20) ? 0x5000 : 0x0;
+ data[1] = 0x0820 | ((value & 0x20) ? 0x0001 : 0x0);
+ data[1] |= (value & 0x10) ? 0x0054 : 0x0;
+ data[1] |= (value & 0x08) ? 0x1500 : 0x0;
+ data[1] |= (value & 0x04) ? 0x4000 : 0x0;
+ data[2] = 0x2082 | ((value & 0x04) ? 0x0005 : 0x0);
+ data[2] |= (value & 0x02) ? 0x0150 : 0x0;
+ data[2] |= (value & 0x01) ? 0x5400 : 0x0;
+ data[3] = 0xfe1d;
+
+ ret += w9968cf_write_fsb(sd, data);
+
+ if (!ret)
+ PDEBUG(D_USBO, "i2c 0x%02x -> [0x%02x]", value, reg);
+ else
+ PDEBUG(D_ERR, "i2c 0x%02x -> [0x%02x] failed", value, reg);
+
+ return ret;
+}
+
+/* SMBus protocol: S Addr Wr [A] Subaddr [A] P S Addr+1 Rd [A] [Value] NA P */
+static int w9968cf_i2c_r(struct sd *sd, u8 reg)
+{
+ int ret = 0;
+ u8 value;
+
+ /* Fast serial bus data control disable */
+ ret += w9968cf_write_sb(sd, 0x0013); /* don't change ! */
+
+ ret += w9968cf_smbus_start(sd);
+ ret += w9968cf_smbus_write_byte(sd, sd->sensor_addr);
+ ret += w9968cf_smbus_read_ack(sd);
+ ret += w9968cf_smbus_write_byte(sd, reg);
+ ret += w9968cf_smbus_read_ack(sd);
+ ret += w9968cf_smbus_stop(sd);
+ ret += w9968cf_smbus_start(sd);
+ ret += w9968cf_smbus_write_byte(sd, sd->sensor_addr + 1);
+ ret += w9968cf_smbus_read_ack(sd);
+ ret += w9968cf_smbus_read_byte(sd, &value);
+ /* signal we don't want to read anymore, the v4l1 driver used to
+ send an ack here which is very wrong! (and then fixed
+ the issues this gave by retrying reads) */
+ ret += w9968cf_smbus_write_nack(sd);
+ ret += w9968cf_smbus_stop(sd);
+
+ /* Fast serial bus data control re-enable */
+ ret += w9968cf_write_sb(sd, 0x0030);
+
+ if (!ret) {
+ ret = value;
+ PDEBUG(D_USBI, "i2c [0x%02X] -> 0x%02X", reg, value);
+ } else
+ PDEBUG(D_ERR, "i2c read [0x%02x] failed", reg);
+
+ return ret;
+}
+
+
+/*--------------------------------------------------------------------------
+ Turn on the LED on some webcams. A beep should be heard too.
+ Return 0 on success, a negative number otherwise.
+ --------------------------------------------------------------------------*/
+static int w9968cf_configure(struct sd *sd)
+{
+ int ret = 0;
+
+ ret += reg_w(sd, 0x00, 0xff00); /* power-down */
+ ret += reg_w(sd, 0x00, 0xbf17); /* reset everything */
+ ret += reg_w(sd, 0x00, 0xbf10); /* normal operation */
+ ret += reg_w(sd, 0x01, 0x0010); /* serial bus, SDS high */
+ ret += reg_w(sd, 0x01, 0x0000); /* serial bus, SDS low */
+ ret += reg_w(sd, 0x01, 0x0010); /* ..high 'beep-beep' */
+ ret += reg_w(sd, 0x01, 0x0030); /* Set sda scl to FSB mode */
+
+ if (ret)
+ PDEBUG(D_ERR, "Couldn't turn on the LED");
+
+ sd->stopped = 1;
+
+ return ret;
+}
+
+static int w9968cf_init(struct sd *sd)
+{
+ int ret = 0;
+ unsigned long hw_bufsize = sd->sif ? (352 * 288 * 2) : (640 * 480 * 2),
+ y0 = 0x0000,
+ u0 = y0 + hw_bufsize/2,
+ v0 = u0 + hw_bufsize/4,
+ y1 = v0 + hw_bufsize/4,
+ u1 = y1 + hw_bufsize/2,
+ v1 = u1 + hw_bufsize/4;
+
+ ret += reg_w(sd, 0x00, 0xff00); /* power off */
+ ret += reg_w(sd, 0x00, 0xbf10); /* power on */
+
+ ret += reg_w(sd, 0x03, 0x405d); /* DRAM timings */
+ ret += reg_w(sd, 0x04, 0x0030); /* SDRAM timings */
+
+ ret += reg_w(sd, 0x20, y0 & 0xffff); /* Y buf.0, low */
+ ret += reg_w(sd, 0x21, y0 >> 16); /* Y buf.0, high */
+ ret += reg_w(sd, 0x24, u0 & 0xffff); /* U buf.0, low */
+ ret += reg_w(sd, 0x25, u0 >> 16); /* U buf.0, high */
+ ret += reg_w(sd, 0x28, v0 & 0xffff); /* V buf.0, low */
+ ret += reg_w(sd, 0x29, v0 >> 16); /* V buf.0, high */
+
+ ret += reg_w(sd, 0x22, y1 & 0xffff); /* Y buf.1, low */
+ ret += reg_w(sd, 0x23, y1 >> 16); /* Y buf.1, high */
+ ret += reg_w(sd, 0x26, u1 & 0xffff); /* U buf.1, low */
+ ret += reg_w(sd, 0x27, u1 >> 16); /* U buf.1, high */
+ ret += reg_w(sd, 0x2a, v1 & 0xffff); /* V buf.1, low */
+ ret += reg_w(sd, 0x2b, v1 >> 16); /* V buf.1, high */
+
+ ret += reg_w(sd, 0x32, y1 & 0xffff); /* JPEG buf 0 low */
+ ret += reg_w(sd, 0x33, y1 >> 16); /* JPEG buf 0 high */
+
+ ret += reg_w(sd, 0x34, y1 & 0xffff); /* JPEG buf 1 low */
+ ret += reg_w(sd, 0x35, y1 >> 16); /* JPEG bug 1 high */
+
+ ret += reg_w(sd, 0x36, 0x0000);/* JPEG restart interval */
+ ret += reg_w(sd, 0x37, 0x0804);/*JPEG VLE FIFO threshold*/
+ ret += reg_w(sd, 0x38, 0x0000);/* disable hw up-scaling */
+ ret += reg_w(sd, 0x3f, 0x0000); /* JPEG/MCTL test data */
+
+ return ret;
+}
+
+static int w9968cf_set_crop_window(struct sd *sd)
+{
+ int ret = 0, start_cropx, start_cropy, x, y, fw, fh, cw, ch,
+ max_width, max_height;
+
+ if (sd->sif) {
+ max_width = 352;
+ max_height = 288;
+ } else {
+ max_width = 640;
+ max_height = 480;
+ }
+
+ if (sd->sensor == SEN_OV7620) {
+ /* Sigh, this is dependend on the clock / framerate changes
+ made by the frequency control, sick. */
+ if (sd->freq == 1) {
+ start_cropx = 277;
+ start_cropy = 37;
+ } else {
+ start_cropx = 105;
+ start_cropy = 37;
+ }
+ } else {
+ start_cropx = 320;
+ start_cropy = 35;
+ }
+
+ /* Work around to avoid FP arithmetics */
+ #define SC(x) ((x) << 10)
+
+ /* Scaling factors */
+ fw = SC(sd->gspca_dev.width) / max_width;
+ fh = SC(sd->gspca_dev.height) / max_height;
+
+ cw = (fw >= fh) ? max_width : SC(sd->gspca_dev.width)/fh;
+ ch = (fw >= fh) ? SC(sd->gspca_dev.height)/fw : max_height;
+
+ sd->sensor_width = max_width;
+ sd->sensor_height = max_height;
+
+ x = (max_width - cw) / 2;
+ y = (max_height - ch) / 2;
+
+ ret += reg_w(sd, 0x10, start_cropx + x);
+ ret += reg_w(sd, 0x11, start_cropy + y);
+ ret += reg_w(sd, 0x12, start_cropx + x + cw);
+ ret += reg_w(sd, 0x13, start_cropy + y + ch);
+
+ return ret;
+}
+
+static int w9968cf_mode_init_regs(struct sd *sd)
+{
+ int ret = 0, val, vs_polarity, hs_polarity;
+
+ ret += w9968cf_set_crop_window(sd);
+
+ ret += reg_w(sd, 0x14, sd->gspca_dev.width);
+ ret += reg_w(sd, 0x15, sd->gspca_dev.height);
+
+ /* JPEG width & height */
+ ret += reg_w(sd, 0x30, sd->gspca_dev.width);
+ ret += reg_w(sd, 0x31, sd->gspca_dev.height);
+
+ /* Y & UV frame buffer strides (in WORD) */
+ if (w9968cf_vga_mode[sd->gspca_dev.curr_mode].pixelformat ==
+ V4L2_PIX_FMT_JPEG) {
+ ret += reg_w(sd, 0x2c, sd->gspca_dev.width/2);
+ ret += reg_w(sd, 0x2d, sd->gspca_dev.width/4);
+ } else
+ ret += reg_w(sd, 0x2c, sd->gspca_dev.width);
+
+ ret += reg_w(sd, 0x00, 0xbf17); /* reset everything */
+ ret += reg_w(sd, 0x00, 0xbf10); /* normal operation */
+
+ /* Transfer size in WORDS (for UYVY format only) */
+ val = sd->gspca_dev.width * sd->gspca_dev.height;
+ ret += reg_w(sd, 0x3d, val & 0xffff); /* low bits */
+ ret += reg_w(sd, 0x3e, val >> 16); /* high bits */
+
+ if (w9968cf_vga_mode[sd->gspca_dev.curr_mode].pixelformat ==
+ V4L2_PIX_FMT_JPEG) {
+ /* We may get called multiple times (usb isoc bw negotiat.) */
+ if (!sd->jpeg_hdr)
+ sd->jpeg_hdr = kmalloc(JPEG_HDR_SZ, GFP_KERNEL);
+ if (!sd->jpeg_hdr)
+ return -ENOMEM;
+
+ jpeg_define(sd->jpeg_hdr, sd->gspca_dev.height,
+ sd->gspca_dev.width, 0x22); /* JPEG 420 */
+ jpeg_set_qual(sd->jpeg_hdr, sd->quality);
+ ret += w9968cf_upload_quantizationtables(sd);
+ }
+
+ /* Video Capture Control Register */
+ if (sd->sensor == SEN_OV7620) {
+ /* Seems to work around a bug in the image sensor */
+ vs_polarity = 1;
+ hs_polarity = 1;
+ } else {
+ vs_polarity = 1;
+ hs_polarity = 0;
+ }
+
+ val = (vs_polarity << 12) | (hs_polarity << 11);
+
+ /* NOTE: We may not have enough memory to do double buffering while
+ doing compression (amount of memory differs per model cam).
+ So we use the second image buffer also as jpeg stream buffer
+ (see w9968cf_init), and disable double buffering. */
+ if (w9968cf_vga_mode[sd->gspca_dev.curr_mode].pixelformat ==
+ V4L2_PIX_FMT_JPEG) {
+ /* val |= 0x0002; YUV422P */
+ val |= 0x0003; /* YUV420P */
+ } else
+ val |= 0x0080; /* Enable HW double buffering */
+
+ /* val |= 0x0020; enable clamping */
+ /* val |= 0x0008; enable (1-2-1) filter */
+ /* val |= 0x000c; enable (2-3-6-3-2) filter */
+
+ val |= 0x8000; /* capt. enable */
+
+ ret += reg_w(sd, 0x16, val);
+
+ sd->gspca_dev.empty_packet = 0;
+
+ return ret;
+}
+
+static void w9968cf_stop0(struct sd *sd)
+{
+ if (sd->gspca_dev.present) {
+ reg_w(sd, 0x39, 0x0000); /* disable JPEG encoder */
+ reg_w(sd, 0x16, 0x0000); /* stop video capture */
+ }
+
+ kfree(sd->jpeg_hdr);
+ sd->jpeg_hdr = NULL;
+}
+
+/* The w9968cf docs say that a 0 sized packet means EOF (and also SOF
+ for the next frame). This seems to simply not be true when operating
+ in JPEG mode, in this case there may be empty packets within the
+ frame. So in JPEG mode use the JPEG SOI marker to detect SOF.
+
+ Note to make things even more interesting the w9968cf sends *PLANAR* jpeg,
+ to be precise it sends: SOI, SOF, DRI, SOS, Y-data, SOS, U-data, SOS,
+ V-data, EOI. */
+static void w9968cf_pkt_scan(struct gspca_dev *gspca_dev,
+ u8 *data, /* isoc packet */
+ int len) /* iso packet length */
+{
+ struct sd *sd = (struct sd *) gspca_dev;
+
+ if (w9968cf_vga_mode[gspca_dev->curr_mode].pixelformat ==
+ V4L2_PIX_FMT_JPEG) {
+ if (len >= 2 &&
+ data[0] == 0xff &&
+ data[1] == 0xd8) {
+ gspca_frame_add(gspca_dev, LAST_PACKET,
+ NULL, 0);
+ gspca_frame_add(gspca_dev, FIRST_PACKET,
+ sd->jpeg_hdr, JPEG_HDR_SZ);
+ /* Strip the ff d8, our own header (which adds
+ huffman and quantization tables) already has this */
+ len -= 2;
+ data += 2;
+ }
+ } else {
+ /* In UYVY mode an empty packet signals EOF */
+ if (gspca_dev->empty_packet) {
+ gspca_frame_add(gspca_dev, LAST_PACKET,
+ NULL, 0);
+ gspca_frame_add(gspca_dev, FIRST_PACKET,
+ NULL, 0);
+ gspca_dev->empty_packet = 0;
+ }
+ }
+ gspca_frame_add(gspca_dev, INTER_PACKET, data, len);
+}
diff --git a/drivers/media/video/gspca/zc3xx.c b/drivers/media/video/gspca/zc3xx.c
index cdf3357..69e5dc4 100644
--- a/drivers/media/video/gspca/zc3xx.c
+++ b/drivers/media/video/gspca/zc3xx.c
@@ -61,17 +61,18 @@
#define SENSOR_HV7131C 6
#define SENSOR_ICM105A 7
#define SENSOR_MC501CB 8
-#define SENSOR_OV7620 9
-/*#define SENSOR_OV7648 9 - same values */
-#define SENSOR_OV7630C 10
-#define SENSOR_PAS106 11
-#define SENSOR_PAS202B 12
-#define SENSOR_PB0330 13
-#define SENSOR_PO2030 14
-#define SENSOR_TAS5130CK 15
-#define SENSOR_TAS5130CXX 16
-#define SENSOR_TAS5130C_VF0250 17
-#define SENSOR_MAX 18
+#define SENSOR_MI0360SOC 9
+#define SENSOR_OV7620 10
+/*#define SENSOR_OV7648 10 - same values */
+#define SENSOR_OV7630C 11
+#define SENSOR_PAS106 12
+#define SENSOR_PAS202B 13
+#define SENSOR_PB0330 14 /* (MI0360) */
+#define SENSOR_PO2030 15
+#define SENSOR_TAS5130CK 16
+#define SENSOR_TAS5130CXX 17
+#define SENSOR_TAS5130C_VF0250 18
+#define SENSOR_MAX 19
unsigned short chip_revision;
u8 *jpeg_hdr;
@@ -420,9 +421,7 @@
{0xaa, 0xfe, 0x0010}, /* 00,fe,10,aa */
{}
};
-static const struct usb_action cs2102_Initial[] = {
- {0xa1, 0x01, 0x0008},
- {0xa1, 0x01, 0x0008},
+static const struct usb_action cs2102_Initial[] = { /* 320x240 */
{0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL},
{0xa0, 0x10, ZC3XX_R002_CLOCKSELECT},
{0xa0, 0x00, ZC3XX_R010_CMOSSENSORSELECT},
@@ -471,88 +470,10 @@
{0xa0, 0x08, ZC3XX_R301_EEPROMACCESS},
{0xa0, 0x68, ZC3XX_R18D_YTARGET},
{0xa0, 0x00, 0x01ad},
- {0xa1, 0x01, 0x0002},
- {0xa1, 0x01, 0x0008},
- {0xa0, 0x03, ZC3XX_R008_CLOCKSETTING}, /* 00 */
- {0xa0, 0x08, ZC3XX_R1C6_SHARPNESS00}, /* sharpness+ */
- {0xa1, 0x01, 0x01c8},
- {0xa1, 0x01, 0x01c9},
- {0xa1, 0x01, 0x01ca},
- {0xa0, 0x0f, ZC3XX_R1CB_SHARPNESS05}, /* sharpness- */
- {0xa0, 0x24, ZC3XX_R120_GAMMA00}, /* gamma 5 */
- {0xa0, 0x44, ZC3XX_R121_GAMMA01},
- {0xa0, 0x64, ZC3XX_R122_GAMMA02},
- {0xa0, 0x84, ZC3XX_R123_GAMMA03},
- {0xa0, 0x9d, ZC3XX_R124_GAMMA04},
- {0xa0, 0xb2, ZC3XX_R125_GAMMA05},
- {0xa0, 0xc4, ZC3XX_R126_GAMMA06},
- {0xa0, 0xd3, ZC3XX_R127_GAMMA07},
- {0xa0, 0xe0, ZC3XX_R128_GAMMA08},
- {0xa0, 0xeb, ZC3XX_R129_GAMMA09},
- {0xa0, 0xf4, ZC3XX_R12A_GAMMA0A},
- {0xa0, 0xfb, ZC3XX_R12B_GAMMA0B},
- {0xa0, 0xff, ZC3XX_R12C_GAMMA0C},
- {0xa0, 0xff, ZC3XX_R12D_GAMMA0D},
- {0xa0, 0xff, ZC3XX_R12E_GAMMA0E},
- {0xa0, 0xff, ZC3XX_R12F_GAMMA0F},
- {0xa0, 0x18, ZC3XX_R130_GAMMA10},
- {0xa0, 0x20, ZC3XX_R131_GAMMA11},
- {0xa0, 0x20, ZC3XX_R132_GAMMA12},
- {0xa0, 0x1c, ZC3XX_R133_GAMMA13},
- {0xa0, 0x16, ZC3XX_R134_GAMMA14},
- {0xa0, 0x13, ZC3XX_R135_GAMMA15},
- {0xa0, 0x10, ZC3XX_R136_GAMMA16},
- {0xa0, 0x0e, ZC3XX_R137_GAMMA17},
- {0xa0, 0x0b, ZC3XX_R138_GAMMA18},
- {0xa0, 0x09, ZC3XX_R139_GAMMA19},
- {0xa0, 0x07, ZC3XX_R13A_GAMMA1A},
- {0xa0, 0x06, ZC3XX_R13B_GAMMA1B},
- {0xa0, 0x00, ZC3XX_R13C_GAMMA1C},
- {0xa0, 0x00, ZC3XX_R13D_GAMMA1D},
- {0xa0, 0x00, ZC3XX_R13E_GAMMA1E},
- {0xa0, 0x01, ZC3XX_R13F_GAMMA1F},
- {0xa0, 0x58, ZC3XX_R10A_RGB00}, /* matrix */
- {0xa0, 0xf4, ZC3XX_R10B_RGB01},
- {0xa0, 0xf4, ZC3XX_R10C_RGB02},
- {0xa0, 0xf4, ZC3XX_R10D_RGB10},
- {0xa0, 0x58, ZC3XX_R10E_RGB11},
- {0xa0, 0xf4, ZC3XX_R10F_RGB12},
- {0xa0, 0xf4, ZC3XX_R110_RGB20},
- {0xa0, 0xf4, ZC3XX_R111_RGB21},
- {0xa0, 0x58, ZC3XX_R112_RGB22},
- {0xa1, 0x01, 0x0180},
- {0xa0, 0x00, ZC3XX_R180_AUTOCORRECTENABLE},
- {0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
- {0xaa, 0x23, 0x0001},
- {0xaa, 0x24, 0x0055},
- {0xaa, 0x25, 0x00cc},
- {0xaa, 0x21, 0x003f},
- {0xa0, 0x02, ZC3XX_R190_EXPOSURELIMITHIGH},
- {0xa0, 0xab, ZC3XX_R191_EXPOSURELIMITMID},
- {0xa0, 0x98, ZC3XX_R192_EXPOSURELIMITLOW},
- {0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH},
- {0xa0, 0x30, ZC3XX_R196_ANTIFLICKERMID},
- {0xa0, 0xd4, ZC3XX_R197_ANTIFLICKERLOW},
- {0xa0, 0x10, ZC3XX_R18C_AEFREEZE},
- {0xa0, 0x20, ZC3XX_R18F_AEUNFREEZE},
- {0xa0, 0x10, ZC3XX_R1A9_DIGITALLIMITDIFF},
- {0xa0, 0x24, ZC3XX_R1AA_DIGITALGAINSTEP},
- {0xa0, 0x39, ZC3XX_R01D_HSYNC_0},
- {0xa0, 0x70, ZC3XX_R01E_HSYNC_1},
- {0xa0, 0xb0, ZC3XX_R01F_HSYNC_2},
- {0xa0, 0xff, ZC3XX_R020_HSYNC_3},
- {0xa0, 0x40, ZC3XX_R180_AUTOCORRECTENABLE},
- {0xa1, 0x01, 0x0180},
- {0xa0, 0x42, ZC3XX_R180_AUTOCORRECTENABLE},
- {0xa0, 0x40, ZC3XX_R116_RGAIN},
- {0xa0, 0x40, ZC3XX_R117_GGAIN},
- {0xa0, 0x40, ZC3XX_R118_BGAIN},
{}
};
-static const struct usb_action cs2102_InitialScale[] = {
- {0xa1, 0x01, 0x0008},
- {0xa1, 0x01, 0x0008},
+static const struct usb_action cs2102_InitialScale[] = { /* 640x480 */
{0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL},
{0xa0, 0x00, ZC3XX_R002_CLOCKSELECT},
{0xa0, 0x00, ZC3XX_R010_CMOSSENSORSELECT},
@@ -601,57 +522,75 @@
{0xa0, 0x08, ZC3XX_R301_EEPROMACCESS},
{0xa0, 0x68, ZC3XX_R18D_YTARGET},
{0xa0, 0x00, 0x01ad},
- {0xa1, 0x01, 0x0002},
- {0xa1, 0x01, 0x0008},
- {0xa0, 0x03, ZC3XX_R008_CLOCKSETTING}, /* 00 */
- {0xa0, 0x08, ZC3XX_R1C6_SHARPNESS00}, /* sharpness+ */
- {0xa1, 0x01, 0x01c8},
- {0xa1, 0x01, 0x01c9},
- {0xa1, 0x01, 0x01ca},
- {0xa0, 0x0f, ZC3XX_R1CB_SHARPNESS05}, /* sharpness- */
- {0xa0, 0x24, ZC3XX_R120_GAMMA00}, /* gamma 5 */
- {0xa0, 0x44, ZC3XX_R121_GAMMA01},
- {0xa0, 0x64, ZC3XX_R122_GAMMA02},
- {0xa0, 0x84, ZC3XX_R123_GAMMA03},
- {0xa0, 0x9d, ZC3XX_R124_GAMMA04},
- {0xa0, 0xb2, ZC3XX_R125_GAMMA05},
- {0xa0, 0xc4, ZC3XX_R126_GAMMA06},
- {0xa0, 0xd3, ZC3XX_R127_GAMMA07},
- {0xa0, 0xe0, ZC3XX_R128_GAMMA08},
- {0xa0, 0xeb, ZC3XX_R129_GAMMA09},
- {0xa0, 0xf4, ZC3XX_R12A_GAMMA0A},
- {0xa0, 0xfb, ZC3XX_R12B_GAMMA0B},
- {0xa0, 0xff, ZC3XX_R12C_GAMMA0C},
- {0xa0, 0xff, ZC3XX_R12D_GAMMA0D},
- {0xa0, 0xff, ZC3XX_R12E_GAMMA0E},
- {0xa0, 0xff, ZC3XX_R12F_GAMMA0F},
- {0xa0, 0x18, ZC3XX_R130_GAMMA10},
- {0xa0, 0x20, ZC3XX_R131_GAMMA11},
- {0xa0, 0x20, ZC3XX_R132_GAMMA12},
- {0xa0, 0x1c, ZC3XX_R133_GAMMA13},
- {0xa0, 0x16, ZC3XX_R134_GAMMA14},
- {0xa0, 0x13, ZC3XX_R135_GAMMA15},
- {0xa0, 0x10, ZC3XX_R136_GAMMA16},
- {0xa0, 0x0e, ZC3XX_R137_GAMMA17},
- {0xa0, 0x0b, ZC3XX_R138_GAMMA18},
- {0xa0, 0x09, ZC3XX_R139_GAMMA19},
- {0xa0, 0x07, ZC3XX_R13A_GAMMA1A},
- {0xa0, 0x06, ZC3XX_R13B_GAMMA1B},
- {0xa0, 0x00, ZC3XX_R13C_GAMMA1C},
- {0xa0, 0x00, ZC3XX_R13D_GAMMA1D},
- {0xa0, 0x00, ZC3XX_R13E_GAMMA1E},
- {0xa0, 0x01, ZC3XX_R13F_GAMMA1F},
- {0xa0, 0x58, ZC3XX_R10A_RGB00}, /* matrix */
- {0xa0, 0xf4, ZC3XX_R10B_RGB01},
- {0xa0, 0xf4, ZC3XX_R10C_RGB02},
- {0xa0, 0xf4, ZC3XX_R10D_RGB10},
- {0xa0, 0x58, ZC3XX_R10E_RGB11},
- {0xa0, 0xf4, ZC3XX_R10F_RGB12},
- {0xa0, 0xf4, ZC3XX_R110_RGB20},
- {0xa0, 0xf4, ZC3XX_R111_RGB21},
- {0xa0, 0x58, ZC3XX_R112_RGB22},
- {0xa1, 0x01, 0x0180},
- {0xa0, 0x00, ZC3XX_R180_AUTOCORRECTENABLE},
+ {}
+};
+static const struct usb_action cs2102_50HZ[] = {
+ {0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
+ {0xaa, 0x23, 0x0001},
+ {0xaa, 0x24, 0x005f},
+ {0xaa, 0x25, 0x0090},
+ {0xaa, 0x21, 0x00dd},
+ {0xa0, 0x02, ZC3XX_R190_EXPOSURELIMITHIGH},
+ {0xa0, 0xbf, ZC3XX_R191_EXPOSURELIMITMID},
+ {0xa0, 0x20, ZC3XX_R192_EXPOSURELIMITLOW},
+ {0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH},
+ {0xa0, 0x3a, ZC3XX_R196_ANTIFLICKERMID},
+ {0xa0, 0x98, ZC3XX_R197_ANTIFLICKERLOW},
+ {0xa0, 0x10, ZC3XX_R18C_AEFREEZE},
+ {0xa0, 0x20, ZC3XX_R18F_AEUNFREEZE},
+ {0xa0, 0x10, ZC3XX_R1A9_DIGITALLIMITDIFF},
+ {0xa0, 0x24, ZC3XX_R1AA_DIGITALGAINSTEP},
+ {0xa0, 0xdd, ZC3XX_R01D_HSYNC_0},
+ {0xa0, 0xe4, ZC3XX_R01E_HSYNC_1},
+ {0xa0, 0xf0, ZC3XX_R01F_HSYNC_2},
+ {0xa0, 0xff, ZC3XX_R020_HSYNC_3},
+ {}
+};
+static const struct usb_action cs2102_50HZScale[] = {
+ {0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
+ {0xaa, 0x23, 0x0000},
+ {0xaa, 0x24, 0x00af},
+ {0xaa, 0x25, 0x00c8},
+ {0xaa, 0x21, 0x0068},
+ {0xa0, 0x01, ZC3XX_R190_EXPOSURELIMITHIGH},
+ {0xa0, 0x5f, ZC3XX_R191_EXPOSURELIMITMID},
+ {0xa0, 0x90, ZC3XX_R192_EXPOSURELIMITLOW},
+ {0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH},
+ {0xa0, 0x1d, ZC3XX_R196_ANTIFLICKERMID},
+ {0xa0, 0x4c, ZC3XX_R197_ANTIFLICKERLOW},
+ {0xa0, 0x10, ZC3XX_R18C_AEFREEZE},
+ {0xa0, 0x20, ZC3XX_R18F_AEUNFREEZE},
+ {0xa0, 0x10, ZC3XX_R1A9_DIGITALLIMITDIFF},
+ {0xa0, 0x24, ZC3XX_R1AA_DIGITALGAINSTEP},
+ {0xa0, 0x68, ZC3XX_R01D_HSYNC_0},
+ {0xa0, 0xe3, ZC3XX_R01E_HSYNC_1},
+ {0xa0, 0xf0, ZC3XX_R01F_HSYNC_2},
+ {0xa0, 0xff, ZC3XX_R020_HSYNC_3},
+ {}
+};
+static const struct usb_action cs2102_60HZ[] = {
+ {0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
+ {0xaa, 0x23, 0x0001},
+ {0xaa, 0x24, 0x0055},
+ {0xaa, 0x25, 0x00cc},
+ {0xaa, 0x21, 0x003f},
+ {0xa0, 0x02, ZC3XX_R190_EXPOSURELIMITHIGH},
+ {0xa0, 0xab, ZC3XX_R191_EXPOSURELIMITMID},
+ {0xa0, 0x98, ZC3XX_R192_EXPOSURELIMITLOW},
+ {0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH},
+ {0xa0, 0x30, ZC3XX_R196_ANTIFLICKERMID},
+ {0xa0, 0xd4, ZC3XX_R197_ANTIFLICKERLOW},
+ {0xa0, 0x10, ZC3XX_R18C_AEFREEZE},
+ {0xa0, 0x20, ZC3XX_R18F_AEUNFREEZE},
+ {0xa0, 0x10, ZC3XX_R1A9_DIGITALLIMITDIFF},
+ {0xa0, 0x24, ZC3XX_R1AA_DIGITALGAINSTEP},
+ {0xa0, 0x39, ZC3XX_R01D_HSYNC_0},
+ {0xa0, 0x70, ZC3XX_R01E_HSYNC_1},
+ {0xa0, 0xb0, ZC3XX_R01F_HSYNC_2},
+ {0xa0, 0xff, ZC3XX_R020_HSYNC_3},
+ {}
+};
+static const struct usb_action cs2102_60HZScale[] = {
{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
{0xaa, 0x23, 0x0000},
{0xaa, 0x24, 0x00aa},
@@ -671,162 +610,50 @@
{0xa0, 0xa5, ZC3XX_R01E_HSYNC_1},
{0xa0, 0xf0, ZC3XX_R01F_HSYNC_2},
{0xa0, 0xff, ZC3XX_R020_HSYNC_3},
- {0xa0, 0x40, ZC3XX_R180_AUTOCORRECTENABLE},
- {0xa1, 0x01, 0x0180},
- {0xa0, 0x42, ZC3XX_R180_AUTOCORRECTENABLE},
- {0xa0, 0x40, ZC3XX_R116_RGAIN},
- {0xa0, 0x40, ZC3XX_R117_GGAIN},
- {0xa0, 0x40, ZC3XX_R118_BGAIN},
- {}
-};
-static const struct usb_action cs2102_50HZ[] = {
- {0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS}, /* 00,19,00,cc */
- {0xaa, 0x0f, 0x008c}, /* 00,0f,8c,aa */
- {0xaa, 0x03, 0x0005}, /* 00,03,05,aa */
- {0xaa, 0x04, 0x00ac}, /* 00,04,ac,aa */
- {0xaa, 0x10, 0x0005}, /* 00,10,05,aa */
- {0xaa, 0x11, 0x00ac}, /* 00,11,ac,aa */
- {0xaa, 0x1b, 0x0000}, /* 00,1b,00,aa */
- {0xaa, 0x1c, 0x0005}, /* 00,1c,05,aa */
- {0xaa, 0x1d, 0x00ac}, /* 00,1d,ac,aa */
- {0xa0, 0x00, ZC3XX_R190_EXPOSURELIMITHIGH}, /* 01,90,00,cc */
- {0xa0, 0x3f, ZC3XX_R191_EXPOSURELIMITMID}, /* 01,91,3f,cc */
- {0xa0, 0xf0, ZC3XX_R192_EXPOSURELIMITLOW}, /* 01,92,f0,cc */
- {0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH}, /* 01,95,00,cc */
- {0xa0, 0x00, ZC3XX_R196_ANTIFLICKERMID}, /* 01,96,00,cc */
- {0xa0, 0x42, ZC3XX_R197_ANTIFLICKERLOW}, /* 01,97,42,cc */
- {0xa0, 0x10, ZC3XX_R18C_AEFREEZE}, /* 01,8c,10,cc */
- {0xa0, 0x20, ZC3XX_R18F_AEUNFREEZE}, /* 01,8f,20,cc */
- {0xa0, 0x10, ZC3XX_R1A9_DIGITALLIMITDIFF}, /* 01,a9,10,cc */
- {0xa0, 0x24, ZC3XX_R1AA_DIGITALGAINSTEP}, /* 01,aa,24,cc */
- {0xa0, 0x8c, ZC3XX_R01D_HSYNC_0}, /* 00,1d,8c,cc */
- {0xa0, 0xb0, ZC3XX_R01E_HSYNC_1}, /* 00,1e,b0,cc */
- {0xa0, 0xd0, ZC3XX_R01F_HSYNC_2}, /* 00,1f,d0,cc */
- {}
-};
-static const struct usb_action cs2102_50HZScale[] = {
- {0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS}, /* 00,19,00,cc */
- {0xaa, 0x0f, 0x0093}, /* 00,0f,93,aa */
- {0xaa, 0x03, 0x0005}, /* 00,03,05,aa */
- {0xaa, 0x04, 0x00a1}, /* 00,04,a1,aa */
- {0xaa, 0x10, 0x0005}, /* 00,10,05,aa */
- {0xaa, 0x11, 0x00a1}, /* 00,11,a1,aa */
- {0xaa, 0x1b, 0x0000}, /* 00,1b,00,aa */
- {0xaa, 0x1c, 0x0005}, /* 00,1c,05,aa */
- {0xaa, 0x1d, 0x00a1}, /* 00,1d,a1,aa */
- {0xa0, 0x00, ZC3XX_R190_EXPOSURELIMITHIGH}, /* 01,90,00,cc */
- {0xa0, 0x3f, ZC3XX_R191_EXPOSURELIMITMID}, /* 01,91,3f,cc */
- {0xa0, 0xf7, ZC3XX_R192_EXPOSURELIMITLOW}, /* 01,92,f7,cc */
- {0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH}, /* 01,95,00,cc */
- {0xa0, 0x00, ZC3XX_R196_ANTIFLICKERMID}, /* 01,96,00,cc */
- {0xa0, 0x83, ZC3XX_R197_ANTIFLICKERLOW}, /* 01,97,83,cc */
- {0xa0, 0x10, ZC3XX_R18C_AEFREEZE}, /* 01,8c,10,cc */
- {0xa0, 0x20, ZC3XX_R18F_AEUNFREEZE}, /* 01,8f,20,cc */
- {0xa0, 0x10, ZC3XX_R1A9_DIGITALLIMITDIFF}, /* 01,a9,10,cc */
- {0xa0, 0x24, ZC3XX_R1AA_DIGITALGAINSTEP}, /* 01,aa,24,cc */
- {0xa0, 0x93, ZC3XX_R01D_HSYNC_0}, /* 00,1d,93,cc */
- {0xa0, 0xb0, ZC3XX_R01E_HSYNC_1}, /* 00,1e,b0,cc */
- {0xa0, 0xd0, ZC3XX_R01F_HSYNC_2}, /* 00,1f,d0,cc */
- {}
-};
-static const struct usb_action cs2102_60HZ[] = {
- {0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS}, /* 00,19,00,cc */
- {0xaa, 0x0f, 0x005d}, /* 00,0f,5d,aa */
- {0xaa, 0x03, 0x0005}, /* 00,03,05,aa */
- {0xaa, 0x04, 0x00aa}, /* 00,04,aa,aa */
- {0xaa, 0x10, 0x0005}, /* 00,10,05,aa */
- {0xaa, 0x11, 0x00aa}, /* 00,11,aa,aa */
- {0xaa, 0x1b, 0x0000}, /* 00,1b,00,aa */
- {0xaa, 0x1c, 0x0005}, /* 00,1c,05,aa */
- {0xaa, 0x1d, 0x00aa}, /* 00,1d,aa,aa */
- {0xa0, 0x00, ZC3XX_R190_EXPOSURELIMITHIGH}, /* 01,90,00,cc */
- {0xa0, 0x3f, ZC3XX_R191_EXPOSURELIMITMID}, /* 01,91,3f,cc */
- {0xa0, 0xe4, ZC3XX_R192_EXPOSURELIMITLOW}, /* 01,92,e4,cc */
- {0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH}, /* 01,95,00,cc */
- {0xa0, 0x00, ZC3XX_R196_ANTIFLICKERMID}, /* 01,96,00,cc */
- {0xa0, 0x3a, ZC3XX_R197_ANTIFLICKERLOW}, /* 01,97,3a,cc */
- {0xa0, 0x10, ZC3XX_R18C_AEFREEZE}, /* 01,8c,10,cc */
- {0xa0, 0x20, ZC3XX_R18F_AEUNFREEZE}, /* 01,8f,20,cc */
- {0xa0, 0x10, ZC3XX_R1A9_DIGITALLIMITDIFF}, /* 01,a9,10,cc */
- {0xa0, 0x24, ZC3XX_R1AA_DIGITALGAINSTEP}, /* 01,aa,24,cc */
- {0xa0, 0x5d, ZC3XX_R01D_HSYNC_0}, /* 00,1d,5d,cc */
- {0xa0, 0x90, ZC3XX_R01E_HSYNC_1}, /* 00,1e,90,cc */
- {0xa0, 0xd0, 0x00c8}, /* 00,c8,d0,cc */
- {}
-};
-static const struct usb_action cs2102_60HZScale[] = {
- {0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS}, /* 00,19,00,cc */
- {0xaa, 0x0f, 0x00b7}, /* 00,0f,b7,aa */
- {0xaa, 0x03, 0x0005}, /* 00,03,05,aa */
- {0xaa, 0x04, 0x00be}, /* 00,04,be,aa */
- {0xaa, 0x10, 0x0005}, /* 00,10,05,aa */
- {0xaa, 0x11, 0x00be}, /* 00,11,be,aa */
- {0xaa, 0x1b, 0x0000}, /* 00,1b,00,aa */
- {0xaa, 0x1c, 0x0005}, /* 00,1c,05,aa */
- {0xaa, 0x1d, 0x00be}, /* 00,1d,be,aa */
- {0xa0, 0x00, ZC3XX_R190_EXPOSURELIMITHIGH}, /* 01,90,00,cc */
- {0xa0, 0x3f, ZC3XX_R191_EXPOSURELIMITMID}, /* 01,91,3f,cc */
- {0xa0, 0xfc, ZC3XX_R192_EXPOSURELIMITLOW}, /* 01,92,fc,cc */
- {0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH}, /* 01,95,00,cc */
- {0xa0, 0x00, ZC3XX_R196_ANTIFLICKERMID}, /* 01,96,00,cc */
- {0xa0, 0x69, ZC3XX_R197_ANTIFLICKERLOW}, /* 01,97,69,cc */
- {0xa0, 0x10, ZC3XX_R18C_AEFREEZE}, /* 01,8c,10,cc */
- {0xa0, 0x20, ZC3XX_R18F_AEUNFREEZE}, /* 01,8f,20,cc */
- {0xa0, 0x10, ZC3XX_R1A9_DIGITALLIMITDIFF}, /* 01,a9,10,cc */
- {0xa0, 0x24, ZC3XX_R1AA_DIGITALGAINSTEP}, /* 01,aa,24,cc */
- {0xa0, 0xb7, ZC3XX_R01D_HSYNC_0}, /* 00,1d,b7,cc */
- {0xa0, 0xd0, ZC3XX_R01E_HSYNC_1}, /* 00,1e,d0,cc */
- {0xa0, 0xe8, ZC3XX_R01F_HSYNC_2}, /* 00,1f,e8,cc */
{}
};
static const struct usb_action cs2102_NoFliker[] = {
- {0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS}, /* 00,19,00,cc */
- {0xaa, 0x0f, 0x0059}, /* 00,0f,59,aa */
- {0xaa, 0x03, 0x0005}, /* 00,03,05,aa */
- {0xaa, 0x04, 0x0080}, /* 00,04,80,aa */
- {0xaa, 0x10, 0x0005}, /* 00,10,05,aa */
- {0xaa, 0x11, 0x0080}, /* 00,11,80,aa */
- {0xaa, 0x1b, 0x0000}, /* 00,1b,00,aa */
- {0xaa, 0x1c, 0x0005}, /* 00,1c,05,aa */
- {0xaa, 0x1d, 0x0080}, /* 00,1d,80,aa */
- {0xa0, 0x00, ZC3XX_R190_EXPOSURELIMITHIGH}, /* 01,90,00,cc */
- {0xa0, 0x3f, ZC3XX_R191_EXPOSURELIMITMID}, /* 01,91,3f,cc */
- {0xa0, 0xf0, ZC3XX_R192_EXPOSURELIMITLOW}, /* 01,92,f0,cc */
- {0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH}, /* 01,95,00,cc */
- {0xa0, 0x00, ZC3XX_R196_ANTIFLICKERMID}, /* 01,96,00,cc */
- {0xa0, 0x10, ZC3XX_R197_ANTIFLICKERLOW}, /* 01,97,10,cc */
- {0xa0, 0x10, ZC3XX_R18C_AEFREEZE}, /* 01,8c,10,cc */
- {0xa0, 0x20, ZC3XX_R18F_AEUNFREEZE}, /* 01,8f,20,cc */
- {0xa0, 0x00, ZC3XX_R1A9_DIGITALLIMITDIFF}, /* 01,a9,00,cc */
- {0xa0, 0x00, ZC3XX_R1AA_DIGITALGAINSTEP}, /* 01,aa,00,cc */
- {0xa0, 0x59, ZC3XX_R01D_HSYNC_0}, /* 00,1d,59,cc */
- {0xa0, 0x90, ZC3XX_R01E_HSYNC_1}, /* 00,1e,90,cc */
- {0xa0, 0xc8, ZC3XX_R01F_HSYNC_2}, /* 00,1f,c8,cc */
+ {0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
+ {0xaa, 0x23, 0x0001},
+ {0xaa, 0x24, 0x005f},
+ {0xaa, 0x25, 0x0000},
+ {0xaa, 0x21, 0x0001},
+ {0xa0, 0x02, ZC3XX_R190_EXPOSURELIMITHIGH},
+ {0xa0, 0xbf, ZC3XX_R191_EXPOSURELIMITMID},
+ {0xa0, 0x00, ZC3XX_R192_EXPOSURELIMITLOW},
+ {0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH},
+ {0xa0, 0x00, ZC3XX_R196_ANTIFLICKERMID},
+ {0xa0, 0x80, ZC3XX_R197_ANTIFLICKERLOW},
+ {0xa0, 0x10, ZC3XX_R18C_AEFREEZE},
+ {0xa0, 0x20, ZC3XX_R18F_AEUNFREEZE},
+ {0xa0, 0x00, ZC3XX_R1A9_DIGITALLIMITDIFF},
+ {0xa0, 0x00, ZC3XX_R1AA_DIGITALGAINSTEP},
+ {0xa0, 0x01, ZC3XX_R01D_HSYNC_0},
+ {0xa0, 0x40, ZC3XX_R01E_HSYNC_1},
+ {0xa0, 0xa0, ZC3XX_R01F_HSYNC_2},
+ {0xa0, 0xff, ZC3XX_R020_HSYNC_3},
{}
};
static const struct usb_action cs2102_NoFlikerScale[] = {
- {0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS}, /* 00,19,00,cc */
- {0xaa, 0x0f, 0x0059}, /* 00,0f,59,aa */
- {0xaa, 0x03, 0x0005}, /* 00,03,05,aa */
- {0xaa, 0x04, 0x0080}, /* 00,04,80,aa */
- {0xaa, 0x10, 0x0005}, /* 00,10,05,aa */
- {0xaa, 0x11, 0x0080}, /* 00,11,80,aa */
- {0xaa, 0x1b, 0x0000}, /* 00,1b,00,aa */
- {0xaa, 0x1c, 0x0005}, /* 00,1c,05,aa */
- {0xaa, 0x1d, 0x0080}, /* 00,1d,80,aa */
- {0xa0, 0x00, ZC3XX_R190_EXPOSURELIMITHIGH}, /* 01,90,00,cc */
- {0xa0, 0x3f, ZC3XX_R191_EXPOSURELIMITMID}, /* 01,91,3f,cc */
- {0xa0, 0xf0, ZC3XX_R192_EXPOSURELIMITLOW}, /* 01,92,f0,cc */
- {0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH}, /* 01,95,00,cc */
- {0xa0, 0x00, ZC3XX_R196_ANTIFLICKERMID}, /* 01,96,00,cc */
- {0xa0, 0x10, ZC3XX_R197_ANTIFLICKERLOW}, /* 01,97,10,cc */
- {0xa0, 0x10, ZC3XX_R18C_AEFREEZE}, /* 01,8c,10,cc */
- {0xa0, 0x20, ZC3XX_R18F_AEUNFREEZE}, /* 01,8f,20,cc */
- {0xa0, 0x00, ZC3XX_R1A9_DIGITALLIMITDIFF}, /* 01,a9,00,cc */
- {0xa0, 0x00, ZC3XX_R1AA_DIGITALGAINSTEP}, /* 01,aa,00,cc */
- {0xa0, 0x59, ZC3XX_R01D_HSYNC_0}, /* 00,1d,59,cc */
- {0xa0, 0x90, ZC3XX_R01E_HSYNC_1}, /* 00,1e,90,cc */
- {0xa0, 0xc8, ZC3XX_R01F_HSYNC_2}, /* 00,1f,c8,cc */
+ {0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
+ {0xaa, 0x23, 0x0000},
+ {0xaa, 0x24, 0x00af},
+ {0xaa, 0x25, 0x0080},
+ {0xaa, 0x21, 0x0001},
+ {0xa0, 0x01, ZC3XX_R190_EXPOSURELIMITHIGH},
+ {0xa0, 0x5f, ZC3XX_R191_EXPOSURELIMITMID},
+ {0xa0, 0x80, ZC3XX_R192_EXPOSURELIMITLOW},
+ {0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH},
+ {0xa0, 0x00, ZC3XX_R196_ANTIFLICKERMID},
+ {0xa0, 0x80, ZC3XX_R197_ANTIFLICKERLOW},
+ {0xa0, 0x10, ZC3XX_R18C_AEFREEZE},
+ {0xa0, 0x20, ZC3XX_R18F_AEUNFREEZE},
+ {0xa0, 0x00, ZC3XX_R1A9_DIGITALLIMITDIFF},
+ {0xa0, 0x00, ZC3XX_R1AA_DIGITALGAINSTEP},
+ {0xa0, 0x01, ZC3XX_R01D_HSYNC_0},
+ {0xa0, 0x40, ZC3XX_R01E_HSYNC_1},
+ {0xa0, 0xa0, ZC3XX_R01F_HSYNC_2},
+ {0xa0, 0xff, ZC3XX_R020_HSYNC_3},
{}
};
@@ -4409,153 +4236,8 @@
{}
};
-static const struct usb_action pb03303x_Initial[] = {
- {0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL},
- {0xa0, 0x03, ZC3XX_R008_CLOCKSETTING},
- {0xa0, 0x0a, ZC3XX_R010_CMOSSENSORSELECT},
- {0xa0, 0x10, ZC3XX_R002_CLOCKSELECT},
- {0xa0, 0x02, ZC3XX_R003_FRAMEWIDTHHIGH},
- {0xa0, 0x80, ZC3XX_R004_FRAMEWIDTHLOW},
- {0xa0, 0x01, ZC3XX_R005_FRAMEHEIGHTHIGH},
- {0xa0, 0xe0, ZC3XX_R006_FRAMEHEIGHTLOW},
- {0xa0, 0xdc, ZC3XX_R08B_I2CDEVICEADDR}, /* 8b -> dc */
- {0xa0, 0x01, ZC3XX_R001_SYSTEMOPERATING},
- {0xa0, 0x03, ZC3XX_R012_VIDEOCONTROLFUNC},
- {0xa0, 0x01, ZC3XX_R012_VIDEOCONTROLFUNC},
- {0xa0, 0x00, ZC3XX_R098_WINYSTARTLOW},
- {0xa0, 0x00, ZC3XX_R09A_WINXSTARTLOW},
- {0xa0, 0x00, ZC3XX_R11A_FIRSTYLOW},
- {0xa0, 0x00, ZC3XX_R11C_FIRSTXLOW},
- {0xa0, 0xdc, ZC3XX_R08B_I2CDEVICEADDR},
- {0xaa, 0x01, 0x0001},
- {0xaa, 0x06, 0x0000},
- {0xaa, 0x08, 0x0483},
- {0xaa, 0x01, 0x0004},
- {0xaa, 0x08, 0x0006},
- {0xaa, 0x02, 0x0011},
- {0xaa, 0x03, 0x01e7},
- {0xaa, 0x04, 0x0287},
- {0xaa, 0x07, 0x3002},
- {0xaa, 0x20, 0x1100},
- {0xaa, 0x35, 0x0050},
- {0xaa, 0x30, 0x0005},
- {0xaa, 0x31, 0x0000},
- {0xaa, 0x58, 0x0078},
- {0xaa, 0x62, 0x0411},
- {0xaa, 0x2b, 0x0028},
- {0xaa, 0x2c, 0x0030},
- {0xaa, 0x2d, 0x0030},
- {0xaa, 0x2e, 0x0028},
- {0xa0, 0x10, ZC3XX_R087_EXPTIMEMID},
- {0xa0, 0x37, ZC3XX_R101_SENSORCORRECTION},
- {0xa0, 0x05, ZC3XX_R012_VIDEOCONTROLFUNC},
- {0xa0, 0x0d, ZC3XX_R100_OPERATIONMODE},
- {0xa0, 0x06, ZC3XX_R189_AWBSTATUS},
- {0xa0, 0x00, 0x01ad},
- {0xa0, 0x03, ZC3XX_R1C5_SHARPNESSMODE},
- {0xa0, 0x13, ZC3XX_R1CB_SHARPNESS05},
- {0xa0, 0x08, ZC3XX_R250_DEADPIXELSMODE},
- {0xa0, 0x08, ZC3XX_R301_EEPROMACCESS},
- {0xa0, 0x60, ZC3XX_R1A8_DIGITALGAIN},
- {0xa0, 0x78, ZC3XX_R18D_YTARGET},
- {0xa0, 0x61, ZC3XX_R116_RGAIN},
- {0xa0, 0x65, ZC3XX_R118_BGAIN},
-
- {0xa1, 0x01, 0x0002},
- {0xa0, 0x09, 0x01ad},
- {0xa0, 0x15, 0x01ae},
- {0xa0, 0x0d, 0x003a},
- {0xa0, 0x02, 0x003b},
- {0xa0, 0x00, 0x0038},
- {0xa0, 0x50, ZC3XX_R10A_RGB00}, /* matrix */
- {0xa0, 0xf8, ZC3XX_R10B_RGB01},
- {0xa0, 0xf8, ZC3XX_R10C_RGB02},
- {0xa0, 0xf8, ZC3XX_R10D_RGB10},
- {0xa0, 0x50, ZC3XX_R10E_RGB11},
- {0xa0, 0xf8, ZC3XX_R10F_RGB12},
- {0xa0, 0xf8, ZC3XX_R110_RGB20},
- {0xa0, 0xf8, ZC3XX_R111_RGB21},
- {0xa0, 0x50, ZC3XX_R112_RGB22},
-
- {0xa1, 0x01, 0x0008},
- {0xa0, 0x03, ZC3XX_R008_CLOCKSETTING},
- {0xa0, 0x08, ZC3XX_R1C6_SHARPNESS00},
- {0xa1, 0x01, 0x01c8},
- {0xa1, 0x01, 0x01c9},
- {0xa1, 0x01, 0x01ca},
- {0xa0, 0x0f, ZC3XX_R1CB_SHARPNESS05}, /* sharpness- */
- {0xa0, 0x13, ZC3XX_R120_GAMMA00}, /* gamma 4 */
- {0xa0, 0x38, ZC3XX_R121_GAMMA01},
- {0xa0, 0x59, ZC3XX_R122_GAMMA02},
- {0xa0, 0x79, ZC3XX_R123_GAMMA03},
- {0xa0, 0x92, ZC3XX_R124_GAMMA04},
- {0xa0, 0xa7, ZC3XX_R125_GAMMA05},
- {0xa0, 0xb9, ZC3XX_R126_GAMMA06},
- {0xa0, 0xc8, ZC3XX_R127_GAMMA07},
- {0xa0, 0xd4, ZC3XX_R128_GAMMA08},
- {0xa0, 0xdf, ZC3XX_R129_GAMMA09},
- {0xa0, 0xe7, ZC3XX_R12A_GAMMA0A},
- {0xa0, 0xee, ZC3XX_R12B_GAMMA0B},
- {0xa0, 0xf4, ZC3XX_R12C_GAMMA0C},
- {0xa0, 0xf9, ZC3XX_R12D_GAMMA0D},
- {0xa0, 0xfc, ZC3XX_R12E_GAMMA0E},
- {0xa0, 0xff, ZC3XX_R12F_GAMMA0F},
- {0xa0, 0x26, ZC3XX_R130_GAMMA10},
- {0xa0, 0x22, ZC3XX_R131_GAMMA11},
- {0xa0, 0x20, ZC3XX_R132_GAMMA12},
- {0xa0, 0x1c, ZC3XX_R133_GAMMA13},
- {0xa0, 0x16, ZC3XX_R134_GAMMA14},
- {0xa0, 0x13, ZC3XX_R135_GAMMA15},
- {0xa0, 0x10, ZC3XX_R136_GAMMA16},
- {0xa0, 0x0d, ZC3XX_R137_GAMMA17},
- {0xa0, 0x0b, ZC3XX_R138_GAMMA18},
- {0xa0, 0x09, ZC3XX_R139_GAMMA19},
- {0xa0, 0x07, ZC3XX_R13A_GAMMA1A},
- {0xa0, 0x06, ZC3XX_R13B_GAMMA1B},
- {0xa0, 0x05, ZC3XX_R13C_GAMMA1C},
- {0xa0, 0x04, ZC3XX_R13D_GAMMA1D},
- {0xa0, 0x03, ZC3XX_R13E_GAMMA1E},
- {0xa0, 0x02, ZC3XX_R13F_GAMMA1F},
- {0xa0, 0x50, ZC3XX_R10A_RGB00}, /* matrix */
- {0xa0, 0xf8, ZC3XX_R10B_RGB01},
- {0xa0, 0xf8, ZC3XX_R10C_RGB02},
- {0xa0, 0xf8, ZC3XX_R10D_RGB10},
- {0xa0, 0x50, ZC3XX_R10E_RGB11},
- {0xa0, 0xf8, ZC3XX_R10F_RGB12},
- {0xa0, 0xf8, ZC3XX_R110_RGB20},
- {0xa0, 0xf8, ZC3XX_R111_RGB21},
- {0xa0, 0x50, ZC3XX_R112_RGB22},
-
- {0xa1, 0x01, 0x0180},
- {0xa0, 0x00, ZC3XX_R180_AUTOCORRECTENABLE},
- {0xa0, 0x00, ZC3XX_R180_AUTOCORRECTENABLE},
- {0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
- {0xaa, 0x05, 0x0009},
- {0xaa, 0x09, 0x0134},
- {0xa0, 0x00, ZC3XX_R190_EXPOSURELIMITHIGH},
- {0xa0, 0x07, ZC3XX_R191_EXPOSURELIMITMID},
- {0xa0, 0xec, ZC3XX_R192_EXPOSURELIMITLOW},
- {0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH},
- {0xa0, 0x00, ZC3XX_R196_ANTIFLICKERMID},
- {0xa0, 0x9c, ZC3XX_R197_ANTIFLICKERLOW},
- {0xa0, 0x0e, ZC3XX_R18C_AEFREEZE},
- {0xa0, 0x1c, ZC3XX_R18F_AEUNFREEZE},
- {0xa0, 0x14, ZC3XX_R1A9_DIGITALLIMITDIFF},
- {0xa0, 0x24, ZC3XX_R1AA_DIGITALGAINSTEP},
- {0xa0, 0xd7, ZC3XX_R01D_HSYNC_0},
- {0xa0, 0xf4, ZC3XX_R01E_HSYNC_1},
- {0xa0, 0xf9, ZC3XX_R01F_HSYNC_2},
- {0xa0, 0xff, ZC3XX_R020_HSYNC_3},
- {0xa0, 0x42, ZC3XX_R180_AUTOCORRECTENABLE},
- {0xa0, 0x09, 0x01ad},
- {0xa0, 0x15, 0x01ae},
- {0xa0, 0x40, ZC3XX_R180_AUTOCORRECTENABLE},
- {0xa1, 0x01, 0x0180},
- {0xa0, 0x42, ZC3XX_R180_AUTOCORRECTENABLE},
- {}
-};
-
-static const struct usb_action pb03303x_InitialScale[] = {
+/* mi0360soc and pb0330 from vm30x.inf for 0ac8:301b and 0ac8:303b 07/02/13 */
+static const struct usb_action mi0360soc_Initial[] = { /* 640x480 */
{0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL},
{0xa0, 0x03, ZC3XX_R008_CLOCKSETTING},
{0xa0, 0x0a, ZC3XX_R010_CMOSSENSORSELECT},
@@ -4564,15 +4246,70 @@
{0xa0, 0x80, ZC3XX_R004_FRAMEWIDTHLOW},
{0xa0, 0x01, ZC3XX_R005_FRAMEHEIGHTHIGH},
{0xa0, 0xe0, ZC3XX_R006_FRAMEHEIGHTLOW},
- {0xa0, 0xdc, ZC3XX_R08B_I2CDEVICEADDR}, /* 8b -> dc */
+ {0xa0, 0xdc, ZC3XX_R08B_I2CDEVICEADDR},
{0xa0, 0x01, ZC3XX_R001_SYSTEMOPERATING},
- {0xa0, 0x03, ZC3XX_R012_VIDEOCONTROLFUNC},
- {0xa0, 0x01, ZC3XX_R012_VIDEOCONTROLFUNC},
+ {0xa0, 0x07, ZC3XX_R012_VIDEOCONTROLFUNC}, /*jfm: was 03*/
+/* {0xa0, 0x01, ZC3XX_R012_VIDEOCONTROLFUNC}, */
{0xa0, 0x00, ZC3XX_R098_WINYSTARTLOW},
{0xa0, 0x00, ZC3XX_R09A_WINXSTARTLOW},
{0xa0, 0x00, ZC3XX_R11A_FIRSTYLOW},
{0xa0, 0x00, ZC3XX_R11C_FIRSTXLOW},
{0xa0, 0xdc, ZC3XX_R08B_I2CDEVICEADDR},
+ {0xdd, 0x00, 0x0200},
+ {0xaa, 0x01, 0x0001},
+ {0xaa, 0x06, 0x0000},
+ {0xaa, 0x08, 0x0483},
+ {0xaa, 0x01, 0x0004},
+ {0xaa, 0x08, 0x0006},
+ {0xaa, 0x02, 0x0011},
+ {0xaa, 0x03, 0x01e5}, /*jfm: was 01e7*/
+ {0xaa, 0x04, 0x0285}, /*jfm: was 0287*/
+ {0xaa, 0x07, 0x3002},
+ {0xaa, 0x20, 0x5100}, /*jfm: was 1100*/
+ {0xaa, 0x35, 0x507f}, /*jfm: was 0050*/
+ {0xaa, 0x30, 0x0005},
+ {0xaa, 0x31, 0x0000},
+ {0xaa, 0x58, 0x0078},
+ {0xaa, 0x62, 0x0411},
+ {0xaa, 0x2b, 0x0028},
+ {0xaa, 0x2c, 0x007f}, /*jfm: was 0030*/
+ {0xaa, 0x2d, 0x007f}, /*jfm: was 0030*/
+ {0xaa, 0x2e, 0x007f}, /*jfm: was 0030*/
+ {0xa0, 0x10, ZC3XX_R087_EXPTIMEMID},
+ {0xa0, 0xb7, ZC3XX_R101_SENSORCORRECTION}, /*jfm: was 37*/
+ {0xa0, 0x05, ZC3XX_R012_VIDEOCONTROLFUNC},
+ {0xa0, 0x0d, ZC3XX_R100_OPERATIONMODE},
+ {0xa0, 0x06, ZC3XX_R189_AWBSTATUS},
+ {0xa0, 0x09, 0x01ad}, /*jfm: was 00*/
+ {0xa0, 0x03, ZC3XX_R1C5_SHARPNESSMODE},
+ {0xa0, 0x13, ZC3XX_R1CB_SHARPNESS05},
+ {0xa0, 0x08, ZC3XX_R250_DEADPIXELSMODE},
+ {0xa0, 0x08, ZC3XX_R301_EEPROMACCESS},
+ {0xa0, 0x60, ZC3XX_R1A8_DIGITALGAIN},
+ {0xa0, 0x6c, ZC3XX_R18D_YTARGET}, /* jfm: was 78 */
+ {0xa0, 0x61, ZC3XX_R116_RGAIN},
+ {0xa0, 0x65, ZC3XX_R118_BGAIN},
+ {}
+};
+static const struct usb_action mi0360soc_InitialScale[] = { /* 320x240 */
+ {0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL},
+ {0xa0, 0x03, ZC3XX_R008_CLOCKSETTING},
+ {0xa0, 0x0a, ZC3XX_R010_CMOSSENSORSELECT},
+ {0xa0, 0x10, ZC3XX_R002_CLOCKSELECT},
+ {0xa0, 0x02, ZC3XX_R003_FRAMEWIDTHHIGH},
+ {0xa0, 0x80, ZC3XX_R004_FRAMEWIDTHLOW},
+ {0xa0, 0x01, ZC3XX_R005_FRAMEHEIGHTHIGH},
+ {0xa0, 0xe0, ZC3XX_R006_FRAMEHEIGHTLOW},
+ {0xa0, 0xdc, ZC3XX_R08B_I2CDEVICEADDR},
+ {0xa0, 0x01, ZC3XX_R001_SYSTEMOPERATING},
+ {0xa0, 0x07, ZC3XX_R012_VIDEOCONTROLFUNC}, /*jfm: was 03*/
+/* {0xa0, 0x01, ZC3XX_R012_VIDEOCONTROLFUNC}, */
+ {0xa0, 0x00, ZC3XX_R098_WINYSTARTLOW},
+ {0xa0, 0x00, ZC3XX_R09A_WINXSTARTLOW},
+ {0xa0, 0x00, ZC3XX_R11A_FIRSTYLOW},
+ {0xa0, 0x00, ZC3XX_R11C_FIRSTXLOW},
+ {0xa0, 0xdc, ZC3XX_R08B_I2CDEVICEADDR},
+ {0xdd, 0x00, 0x0200},
{0xaa, 0x01, 0x0001},
{0xaa, 0x06, 0x0000},
{0xaa, 0x08, 0x0483},
@@ -4582,111 +4319,111 @@
{0xaa, 0x03, 0x01e7},
{0xaa, 0x04, 0x0287},
{0xaa, 0x07, 0x3002},
- {0xaa, 0x20, 0x1100},
- {0xaa, 0x35, 0x0050},
+ {0xaa, 0x20, 0x5100}, /*jfm: was 1100*/
+ {0xaa, 0x35, 0x007f}, /*jfm: was 0050*/
{0xaa, 0x30, 0x0005},
{0xaa, 0x31, 0x0000},
{0xaa, 0x58, 0x0078},
{0xaa, 0x62, 0x0411},
- {0xaa, 0x2b, 0x0028},
- {0xaa, 0x2c, 0x0030},
- {0xaa, 0x2d, 0x0030},
- {0xaa, 0x2e, 0x0028},
+ {0xaa, 0x2b, 0x007f}, /*jfm: was 28*/
+ {0xaa, 0x2c, 0x007f}, /*jfm: was 30*/
+ {0xaa, 0x2d, 0x007f}, /*jfm: was 30*/
+ {0xaa, 0x2e, 0x007f}, /*jfm: was 28*/
{0xa0, 0x10, ZC3XX_R087_EXPTIMEMID},
- {0xa0, 0x37, ZC3XX_R101_SENSORCORRECTION},
+ {0xa0, 0xb7, ZC3XX_R101_SENSORCORRECTION}, /*jfm: was 37*/
{0xa0, 0x05, ZC3XX_R012_VIDEOCONTROLFUNC},
{0xa0, 0x0d, ZC3XX_R100_OPERATIONMODE},
{0xa0, 0x06, ZC3XX_R189_AWBSTATUS},
- {0xa0, 0x00, 0x01ad},
+ {0xa0, 0x09, 0x01ad}, /*jfm: was 00*/
{0xa0, 0x03, ZC3XX_R1C5_SHARPNESSMODE},
{0xa0, 0x13, ZC3XX_R1CB_SHARPNESS05},
{0xa0, 0x08, ZC3XX_R250_DEADPIXELSMODE},
{0xa0, 0x08, ZC3XX_R301_EEPROMACCESS},
{0xa0, 0x60, ZC3XX_R1A8_DIGITALGAIN},
- {0xa0, 0x78, ZC3XX_R18D_YTARGET},
+ {0xa0, 0x6c, ZC3XX_R18D_YTARGET}, /*jfm: was 78*/
{0xa0, 0x61, ZC3XX_R116_RGAIN},
{0xa0, 0x65, ZC3XX_R118_BGAIN},
-
- {0xa1, 0x01, 0x0002},
-
- {0xa0, 0x09, 0x01ad},
- {0xa0, 0x15, 0x01ae},
-
- {0xa0, 0x0d, 0x003a},
- {0xa0, 0x02, 0x003b},
- {0xa0, 0x00, 0x0038},
- {0xa0, 0x50, ZC3XX_R10A_RGB00}, /* matrix */
- {0xa0, 0xf8, ZC3XX_R10B_RGB01},
- {0xa0, 0xf8, ZC3XX_R10C_RGB02},
- {0xa0, 0xf8, ZC3XX_R10D_RGB10},
- {0xa0, 0x50, ZC3XX_R10E_RGB11},
- {0xa0, 0xf8, ZC3XX_R10F_RGB12},
- {0xa0, 0xf8, ZC3XX_R110_RGB20},
- {0xa0, 0xf8, ZC3XX_R111_RGB21},
- {0xa0, 0x50, ZC3XX_R112_RGB22},
-
- {0xa1, 0x01, 0x0008},
- {0xa0, 0x03, ZC3XX_R008_CLOCKSETTING}, /* clock ? */
- {0xa0, 0x08, ZC3XX_R1C6_SHARPNESS00}, /* sharpness+ */
- {0xa1, 0x01, 0x01c8},
- {0xa1, 0x01, 0x01c9},
- {0xa1, 0x01, 0x01ca},
- {0xa0, 0x0f, ZC3XX_R1CB_SHARPNESS05}, /* sharpness- */
-
- {0xa0, 0x13, ZC3XX_R120_GAMMA00}, /* gamma 4 */
- {0xa0, 0x38, ZC3XX_R121_GAMMA01},
- {0xa0, 0x59, ZC3XX_R122_GAMMA02},
- {0xa0, 0x79, ZC3XX_R123_GAMMA03},
- {0xa0, 0x92, ZC3XX_R124_GAMMA04},
- {0xa0, 0xa7, ZC3XX_R125_GAMMA05},
- {0xa0, 0xb9, ZC3XX_R126_GAMMA06},
- {0xa0, 0xc8, ZC3XX_R127_GAMMA07},
- {0xa0, 0xd4, ZC3XX_R128_GAMMA08},
- {0xa0, 0xdf, ZC3XX_R129_GAMMA09},
- {0xa0, 0xe7, ZC3XX_R12A_GAMMA0A},
- {0xa0, 0xee, ZC3XX_R12B_GAMMA0B},
- {0xa0, 0xf4, ZC3XX_R12C_GAMMA0C},
- {0xa0, 0xf9, ZC3XX_R12D_GAMMA0D},
- {0xa0, 0xfc, ZC3XX_R12E_GAMMA0E},
- {0xa0, 0xff, ZC3XX_R12F_GAMMA0F},
- {0xa0, 0x26, ZC3XX_R130_GAMMA10},
- {0xa0, 0x22, ZC3XX_R131_GAMMA11},
- {0xa0, 0x20, ZC3XX_R132_GAMMA12},
- {0xa0, 0x1c, ZC3XX_R133_GAMMA13},
- {0xa0, 0x16, ZC3XX_R134_GAMMA14},
- {0xa0, 0x13, ZC3XX_R135_GAMMA15},
- {0xa0, 0x10, ZC3XX_R136_GAMMA16},
- {0xa0, 0x0d, ZC3XX_R137_GAMMA17},
- {0xa0, 0x0b, ZC3XX_R138_GAMMA18},
- {0xa0, 0x09, ZC3XX_R139_GAMMA19},
- {0xa0, 0x07, ZC3XX_R13A_GAMMA1A},
- {0xa0, 0x06, ZC3XX_R13B_GAMMA1B},
- {0xa0, 0x05, ZC3XX_R13C_GAMMA1C},
- {0xa0, 0x04, ZC3XX_R13D_GAMMA1D},
- {0xa0, 0x03, ZC3XX_R13E_GAMMA1E},
- {0xa0, 0x02, ZC3XX_R13F_GAMMA1F},
- {0xa0, 0x50, ZC3XX_R10A_RGB00}, /* matrix */
- {0xa0, 0xf8, ZC3XX_R10B_RGB01},
- {0xa0, 0xf8, ZC3XX_R10C_RGB02},
- {0xa0, 0xf8, ZC3XX_R10D_RGB10},
- {0xa0, 0x50, ZC3XX_R10E_RGB11},
- {0xa0, 0xf8, ZC3XX_R10F_RGB12},
- {0xa0, 0xf8, ZC3XX_R110_RGB20},
- {0xa0, 0xf8, ZC3XX_R111_RGB21},
- {0xa0, 0x50, ZC3XX_R112_RGB22},
-
- {0xa1, 0x01, 0x0180},
- {0xa0, 0x00, ZC3XX_R180_AUTOCORRECTENABLE},
+ {}
+};
+static const struct usb_action mi360soc_AE50HZ[] = {
{0xa0, 0x00, ZC3XX_R180_AUTOCORRECTENABLE},
{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
- {0xaa, 0x05, 0x0009},
- {0xaa, 0x09, 0x0134},
+ {0xbb, 0x00, 0x0562},
+ {0xbb, 0x01, 0x09aa},
{0xa0, 0x00, ZC3XX_R190_EXPOSURELIMITHIGH},
- {0xa0, 0x07, ZC3XX_R191_EXPOSURELIMITMID},
- {0xa0, 0xec, ZC3XX_R192_EXPOSURELIMITLOW},
+ {0xa0, 0x03, ZC3XX_R191_EXPOSURELIMITMID},
+ {0xa0, 0x9b, ZC3XX_R192_EXPOSURELIMITLOW},
{0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH},
{0xa0, 0x00, ZC3XX_R196_ANTIFLICKERMID},
- {0xa0, 0x9c, ZC3XX_R197_ANTIFLICKERLOW},
+ {0xa0, 0x47, ZC3XX_R197_ANTIFLICKERLOW},
+ {0xa0, 0x0e, ZC3XX_R18C_AEFREEZE},
+ {0xa0, 0x1c, ZC3XX_R18F_AEUNFREEZE},
+ {0xa0, 0x14, ZC3XX_R1A9_DIGITALLIMITDIFF},
+ {0xa0, 0x66, ZC3XX_R1AA_DIGITALGAINSTEP},
+ {0xa0, 0x62, ZC3XX_R01D_HSYNC_0},
+ {0xa0, 0x90, ZC3XX_R01E_HSYNC_1},
+ {0xa0, 0xc8, ZC3XX_R01F_HSYNC_2},
+ {0xa0, 0xff, ZC3XX_R020_HSYNC_3},
+ {0xa0, 0x60, ZC3XX_R11D_GLOBALGAIN},
+ {0xa0, 0x42, ZC3XX_R180_AUTOCORRECTENABLE},
+ {}
+};
+static const struct usb_action mi360soc_AE50HZScale[] = {
+ {0xa0, 0x00, ZC3XX_R180_AUTOCORRECTENABLE},
+ {0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
+ {0xbb, 0x00, 0x0509},
+ {0xbb, 0x01, 0x0934},
+ {0xa0, 0x00, ZC3XX_R190_EXPOSURELIMITHIGH},
+ {0xa0, 0x07, ZC3XX_R191_EXPOSURELIMITMID},
+ {0xa0, 0xd2, ZC3XX_R192_EXPOSURELIMITLOW},
+ {0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH},
+ {0xa0, 0x00, ZC3XX_R196_ANTIFLICKERMID},
+ {0xa0, 0x9a, ZC3XX_R197_ANTIFLICKERLOW},
+ {0xa0, 0x0e, ZC3XX_R18C_AEFREEZE},
+ {0xa0, 0x1c, ZC3XX_R18F_AEUNFREEZE},
+ {0xa0, 0x14, ZC3XX_R1A9_DIGITALLIMITDIFF},
+ {0xa0, 0x66, ZC3XX_R1AA_DIGITALGAINSTEP},
+ {0xa0, 0xd7, ZC3XX_R01D_HSYNC_0},
+ {0xa0, 0xf4, ZC3XX_R01E_HSYNC_1},
+ {0xa0, 0xf9, ZC3XX_R01F_HSYNC_2},
+ {0xa0, 0xff, ZC3XX_R020_HSYNC_3},
+ {0xa0, 0x42, ZC3XX_R180_AUTOCORRECTENABLE},
+ {}
+};
+static const struct usb_action mi360soc_AE60HZ[] = {
+ {0xa0, 0x00, ZC3XX_R180_AUTOCORRECTENABLE},
+ {0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
+ {0xbb, 0x00, 0x053d},
+ {0xbb, 0x01, 0x096e},
+ {0xa0, 0x00, ZC3XX_R190_EXPOSURELIMITHIGH},
+ {0xa0, 0x07, ZC3XX_R191_EXPOSURELIMITMID},
+ {0xa0, 0xdd, ZC3XX_R192_EXPOSURELIMITLOW},
+ {0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH},
+ {0xa0, 0x00, ZC3XX_R196_ANTIFLICKERMID},
+ {0xa0, 0x3d, ZC3XX_R197_ANTIFLICKERLOW},
+ {0xa0, 0x0e, ZC3XX_R18C_AEFREEZE},
+ {0xa0, 0x1c, ZC3XX_R18F_AEUNFREEZE},
+ {0xa0, 0x14, ZC3XX_R1A9_DIGITALLIMITDIFF},
+ {0xa0, 0x24, ZC3XX_R1AA_DIGITALGAINSTEP},
+ {0xa0, 0x62, ZC3XX_R01D_HSYNC_0},
+ {0xa0, 0x90, ZC3XX_R01E_HSYNC_1},
+ {0xa0, 0xc8, ZC3XX_R01F_HSYNC_2},
+ {0xa0, 0xff, ZC3XX_R020_HSYNC_3},
+ {0xa0, 0x60, ZC3XX_R11D_GLOBALGAIN},
+ {0xa0, 0x42, ZC3XX_R180_AUTOCORRECTENABLE},
+ {}
+};
+static const struct usb_action mi360soc_AE60HZScale[] = {
+ {0xa0, 0x00, ZC3XX_R180_AUTOCORRECTENABLE},
+ {0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
+ {0xbb, 0x00, 0x0509},
+ {0xbb, 0x01, 0x0983},
+ {0xa0, 0x00, ZC3XX_R190_EXPOSURELIMITHIGH},
+ {0xa0, 0x07, ZC3XX_R191_EXPOSURELIMITMID},
+ {0xa0, 0x8f, ZC3XX_R192_EXPOSURELIMITLOW},
+ {0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH},
+ {0xa0, 0x00, ZC3XX_R196_ANTIFLICKERMID},
+ {0xa0, 0x81, ZC3XX_R197_ANTIFLICKERLOW},
{0xa0, 0x0e, ZC3XX_R18C_AEFREEZE},
{0xa0, 0x1c, ZC3XX_R18F_AEUNFREEZE},
{0xa0, 0x14, ZC3XX_R1A9_DIGITALLIMITDIFF},
@@ -4696,16 +4433,105 @@
{0xa0, 0xf9, ZC3XX_R01F_HSYNC_2},
{0xa0, 0xff, ZC3XX_R020_HSYNC_3},
{0xa0, 0x42, ZC3XX_R180_AUTOCORRECTENABLE},
- {0xa0, 0x09, 0x01ad},
- {0xa0, 0x15, 0x01ae},
- {0xa0, 0x40, ZC3XX_R180_AUTOCORRECTENABLE},
- {0xa1, 0x01, 0x0180},
+ {}
+};
+static const struct usb_action mi360soc_AENoFliker[] = {
+ {0xa0, 0x00, ZC3XX_R180_AUTOCORRECTENABLE},
+ {0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
+ {0xbb, 0x00, 0x0509},
+ {0xbb, 0x01, 0x0960},
+ {0xa0, 0x00, ZC3XX_R190_EXPOSURELIMITHIGH},
+ {0xa0, 0x07, ZC3XX_R191_EXPOSURELIMITMID},
+ {0xa0, 0xf0, ZC3XX_R192_EXPOSURELIMITLOW},
+ {0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH},
+ {0xa0, 0x00, ZC3XX_R196_ANTIFLICKERMID},
+ {0xa0, 0x04, ZC3XX_R197_ANTIFLICKERLOW},
+ {0xa0, 0x0e, ZC3XX_R18C_AEFREEZE},
+ {0xa0, 0x1c, ZC3XX_R18F_AEUNFREEZE},
+ {0xa0, 0x00, ZC3XX_R1A9_DIGITALLIMITDIFF},
+ {0xa0, 0x00, ZC3XX_R1AA_DIGITALGAINSTEP},
+ {0xa0, 0x09, ZC3XX_R01D_HSYNC_0},
+ {0xa0, 0x40, ZC3XX_R01E_HSYNC_1},
+ {0xa0, 0x90, ZC3XX_R01F_HSYNC_2},
+ {0xa0, 0xe0, ZC3XX_R020_HSYNC_3},
+ {0xa0, 0x60, ZC3XX_R11D_GLOBALGAIN},
{0xa0, 0x42, ZC3XX_R180_AUTOCORRECTENABLE},
{}
};
-static const struct usb_action pb0330xx_Initial[] = {
- {0xa1, 0x01, 0x0008},
- {0xa1, 0x01, 0x0008},
+static const struct usb_action mi360soc_AENoFlikerScale[] = {
+ {0xa0, 0x00, ZC3XX_R180_AUTOCORRECTENABLE},
+ {0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
+ {0xbb, 0x00, 0x0534},
+ {0xbb, 0x02, 0x0960},
+ {0xa0, 0x00, ZC3XX_R190_EXPOSURELIMITHIGH},
+ {0xa0, 0x07, ZC3XX_R191_EXPOSURELIMITMID},
+ {0xa0, 0xf0, ZC3XX_R192_EXPOSURELIMITLOW},
+ {0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH},
+ {0xa0, 0x00, ZC3XX_R196_ANTIFLICKERMID},
+ {0xa0, 0x04, ZC3XX_R197_ANTIFLICKERLOW},
+ {0xa0, 0x0e, ZC3XX_R18C_AEFREEZE},
+ {0xa0, 0x1c, ZC3XX_R18F_AEUNFREEZE},
+ {0xa0, 0x00, ZC3XX_R1A9_DIGITALLIMITDIFF},
+ {0xa0, 0x00, ZC3XX_R1AA_DIGITALGAINSTEP},
+ {0xa0, 0x34, ZC3XX_R01D_HSYNC_0},
+ {0xa0, 0x60, ZC3XX_R01E_HSYNC_1},
+ {0xa0, 0x90, ZC3XX_R01F_HSYNC_2},
+ {0xa0, 0xe0, ZC3XX_R020_HSYNC_3},
+ {0xa0, 0x60, ZC3XX_R11D_GLOBALGAIN},
+ {0xa0, 0x42, ZC3XX_R180_AUTOCORRECTENABLE},
+ {}
+};
+
+static const struct usb_action pb0330_Initial[] = { /* 640x480 */
+ {0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL},
+ {0xa0, 0x03, ZC3XX_R008_CLOCKSETTING}, /* 00 */
+ {0xa0, 0x0a, ZC3XX_R010_CMOSSENSORSELECT},
+ {0xa0, 0x00, ZC3XX_R002_CLOCKSELECT},
+ {0xa0, 0x02, ZC3XX_R003_FRAMEWIDTHHIGH},
+ {0xa0, 0x80, ZC3XX_R004_FRAMEWIDTHLOW},
+ {0xa0, 0x01, ZC3XX_R005_FRAMEHEIGHTHIGH},
+ {0xa0, 0xe0, ZC3XX_R006_FRAMEHEIGHTLOW},
+ {0xa0, 0x01, ZC3XX_R001_SYSTEMOPERATING},
+ {0xa0, 0x05, ZC3XX_R012_VIDEOCONTROLFUNC},
+ {0xa0, 0x07, ZC3XX_R012_VIDEOCONTROLFUNC},
+ {0xa0, 0x00, ZC3XX_R098_WINYSTARTLOW},
+ {0xa0, 0x00, ZC3XX_R09A_WINXSTARTLOW},
+ {0xa0, 0x00, ZC3XX_R11A_FIRSTYLOW},
+ {0xa0, 0x00, ZC3XX_R11C_FIRSTXLOW},
+ {0xdd, 0x00, 0x0200},
+ {0xa0, 0x05, ZC3XX_R012_VIDEOCONTROLFUNC},
+ {0xaa, 0x01, 0x0006},
+ {0xaa, 0x02, 0x0011},
+ {0xaa, 0x03, 0x01e5}, /*jfm: was 1e7*/
+ {0xaa, 0x04, 0x0285}, /*jfm: was 0287*/
+ {0xaa, 0x06, 0x0003},
+ {0xaa, 0x07, 0x3002},
+ {0xaa, 0x20, 0x1100},
+ {0xaa, 0x2f, 0xf7b0},
+ {0xaa, 0x30, 0x0005},
+ {0xaa, 0x31, 0x0000},
+ {0xaa, 0x34, 0x0100},
+ {0xaa, 0x35, 0x0060},
+ {0xaa, 0x3d, 0x068f},
+ {0xaa, 0x40, 0x01e0},
+ {0xaa, 0x58, 0x0078},
+ {0xaa, 0x62, 0x0411},
+ {0xa0, 0x10, ZC3XX_R087_EXPTIMEMID},
+ {0xa0, 0x37, ZC3XX_R101_SENSORCORRECTION},
+ {0xa0, 0x05, ZC3XX_R012_VIDEOCONTROLFUNC},
+ {0xa0, 0x0d, ZC3XX_R100_OPERATIONMODE},
+ {0xa0, 0x06, ZC3XX_R189_AWBSTATUS},
+ {0xa0, 0x09, 0x01ad}, /*jfm: was 00 */
+ {0xa0, 0x15, 0x01ae},
+ {0xa0, 0x03, ZC3XX_R1C5_SHARPNESSMODE},
+ {0xa0, 0x13, ZC3XX_R1CB_SHARPNESS05},
+ {0xa0, 0x08, ZC3XX_R250_DEADPIXELSMODE},
+ {0xa0, 0x08, ZC3XX_R301_EEPROMACCESS},
+ {0xa0, 0x60, ZC3XX_R1A8_DIGITALGAIN},
+ {0xa0, 0x78, ZC3XX_R18D_YTARGET}, /*jfm: was 6c*/
+ {}
+};
+static const struct usb_action pb0330_InitialScale[] = { /* 320x240 */
{0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL},
{0xa0, 0x03, ZC3XX_R008_CLOCKSETTING}, /* 00 */
{0xa0, 0x0a, ZC3XX_R010_CMOSSENSORSELECT},
@@ -4721,6 +4547,7 @@
{0xa0, 0x00, ZC3XX_R09A_WINXSTARTLOW},
{0xa0, 0x00, ZC3XX_R11A_FIRSTYLOW},
{0xa0, 0x00, ZC3XX_R11C_FIRSTXLOW},
+ {0xdd, 0x00, 0x0200},
{0xa0, 0x05, ZC3XX_R012_VIDEOCONTROLFUNC},
{0xaa, 0x01, 0x0006},
{0xaa, 0x02, 0x0011},
@@ -4743,293 +4570,146 @@
{0xa0, 0x05, ZC3XX_R012_VIDEOCONTROLFUNC},
{0xa0, 0x0d, ZC3XX_R100_OPERATIONMODE},
{0xa0, 0x06, ZC3XX_R189_AWBSTATUS},
- {0xa0, 0x00, 0x01ad},
+ {0xa0, 0x09, 0x01ad},
+ {0xa0, 0x15, 0x01ae},
{0xa0, 0x03, ZC3XX_R1C5_SHARPNESSMODE},
{0xa0, 0x13, ZC3XX_R1CB_SHARPNESS05},
{0xa0, 0x08, ZC3XX_R250_DEADPIXELSMODE},
{0xa0, 0x08, ZC3XX_R301_EEPROMACCESS},
{0xa0, 0x60, ZC3XX_R1A8_DIGITALGAIN},
- {0xa0, 0x6c, ZC3XX_R18D_YTARGET},
- {0xa1, 0x01, 0x0002},
- {0xa0, 0x09, 0x01ad},
- {0xa0, 0x15, 0x01ae},
- {0xa0, 0x00, ZC3XX_R092_I2CADDRESSSELECT},
- {0xa0, 0x02, ZC3XX_R090_I2CCOMMAND},
- {0xa1, 0x01, 0x0091},
- {0xa1, 0x01, 0x0095},
- {0xa1, 0x01, 0x0096},
- {0xa0, 0x50, ZC3XX_R10A_RGB00}, /* matrix */
- {0xa0, 0xf8, ZC3XX_R10B_RGB01},
- {0xa0, 0xf8, ZC3XX_R10C_RGB02},
- {0xa0, 0xf8, ZC3XX_R10D_RGB10},
- {0xa0, 0x50, ZC3XX_R10E_RGB11},
- {0xa0, 0xf8, ZC3XX_R10F_RGB12},
- {0xa0, 0xf8, ZC3XX_R110_RGB20},
- {0xa0, 0xf8, ZC3XX_R111_RGB21},
- {0xa0, 0x50, ZC3XX_R112_RGB22},
- {0xa1, 0x01, 0x0008},
- {0xa0, 0x03, ZC3XX_R008_CLOCKSETTING}, /* clock ? */
- {0xa0, 0x08, ZC3XX_R1C6_SHARPNESS00}, /* sharpness+ */
- {0xa1, 0x01, 0x01c8},
- {0xa1, 0x01, 0x01c9},
- {0xa1, 0x01, 0x01ca},
- {0xa0, 0x0f, ZC3XX_R1CB_SHARPNESS05}, /* sharpness- */
-
- {0xa0, 0x50, ZC3XX_R10A_RGB00}, /* matrix */
- {0xa0, 0xf8, ZC3XX_R10B_RGB01},
- {0xa0, 0xf8, ZC3XX_R10C_RGB02},
- {0xa0, 0xf8, ZC3XX_R10D_RGB10},
- {0xa0, 0x50, ZC3XX_R10E_RGB11},
- {0xa0, 0xf8, ZC3XX_R10F_RGB12},
- {0xa0, 0xf8, ZC3XX_R110_RGB20},
- {0xa0, 0xf8, ZC3XX_R111_RGB21},
- {0xa0, 0x50, ZC3XX_R112_RGB22},
- {0xa1, 0x01, 0x0180},
- {0xa0, 0x00, ZC3XX_R180_AUTOCORRECTENABLE},
- {0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
- {0xaa, 0x05, 0x0066},
- {0xaa, 0x09, 0x02b2},
- {0xaa, 0x10, 0x0002},
-
- {0xa0, 0x60, ZC3XX_R11D_GLOBALGAIN},
- {0xa0, 0x00, ZC3XX_R190_EXPOSURELIMITHIGH},
- {0xa0, 0x07, ZC3XX_R191_EXPOSURELIMITMID},
- {0xa0, 0x8c, ZC3XX_R192_EXPOSURELIMITLOW},
- {0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH},
- {0xa0, 0x00, ZC3XX_R196_ANTIFLICKERMID},
- {0xa0, 0x8a, ZC3XX_R197_ANTIFLICKERLOW},
- {0xa0, 0x10, ZC3XX_R18C_AEFREEZE},
- {0xa0, 0x20, ZC3XX_R18F_AEUNFREEZE},
- {0xa0, 0x14, ZC3XX_R1A9_DIGITALLIMITDIFF},
- {0xa0, 0x24, ZC3XX_R1AA_DIGITALGAINSTEP},
- {0xa0, 0xd7, ZC3XX_R01D_HSYNC_0},
- {0xa0, 0xf0, ZC3XX_R01E_HSYNC_1},
- {0xa0, 0xf8, ZC3XX_R01F_HSYNC_2},
- {0xa0, 0xff, ZC3XX_R020_HSYNC_3},
- {0xa0, 0x09, 0x01ad},
- {0xa0, 0x15, 0x01ae},
- {0xa0, 0x40, ZC3XX_R180_AUTOCORRECTENABLE},
- {0xa1, 0x01, 0x0180},
- {0xa0, 0x42, ZC3XX_R180_AUTOCORRECTENABLE},
- {0xa1, 0x01, 0x0008},
- {0xa1, 0x01, 0x0007},
-/* {0xa0, 0x30, 0x0007}, */
-/* {0xa0, 0x00, 0x0007}, */
- {}
-};
-
-static const struct usb_action pb0330xx_InitialScale[] = {
- {0xa1, 0x01, 0x0008},
- {0xa1, 0x01, 0x0008},
- {0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL},
- {0xa0, 0x03, ZC3XX_R008_CLOCKSETTING}, /* 00 */
- {0xa0, 0x0a, ZC3XX_R010_CMOSSENSORSELECT},
- {0xa0, 0x00, ZC3XX_R002_CLOCKSELECT}, /* 10 */
- {0xa0, 0x02, ZC3XX_R003_FRAMEWIDTHHIGH},
- {0xa0, 0x80, ZC3XX_R004_FRAMEWIDTHLOW},
- {0xa0, 0x01, ZC3XX_R005_FRAMEHEIGHTHIGH},
- {0xa0, 0xe0, ZC3XX_R006_FRAMEHEIGHTLOW},
- {0xa0, 0x01, ZC3XX_R001_SYSTEMOPERATING},
- {0xa0, 0x05, ZC3XX_R012_VIDEOCONTROLFUNC},
- {0xa0, 0x07, ZC3XX_R012_VIDEOCONTROLFUNC},
- {0xa0, 0x00, ZC3XX_R098_WINYSTARTLOW},
- {0xa0, 0x00, ZC3XX_R09A_WINXSTARTLOW},
- {0xa0, 0x00, ZC3XX_R11A_FIRSTYLOW},
- {0xa0, 0x00, ZC3XX_R11C_FIRSTXLOW},
- {0xa0, 0x05, ZC3XX_R012_VIDEOCONTROLFUNC},
- {0xaa, 0x01, 0x0006},
- {0xaa, 0x02, 0x0011},
- {0xaa, 0x03, 0x01e7},
- {0xaa, 0x04, 0x0287},
- {0xaa, 0x06, 0x0003},
- {0xaa, 0x07, 0x3002},
- {0xaa, 0x20, 0x1100},
- {0xaa, 0x2f, 0xf7b0},
- {0xaa, 0x30, 0x0005},
- {0xaa, 0x31, 0x0000},
- {0xaa, 0x34, 0x0100},
- {0xaa, 0x35, 0x0060},
- {0xaa, 0x3d, 0x068f},
- {0xaa, 0x40, 0x01e0},
- {0xaa, 0x58, 0x0078},
- {0xaa, 0x62, 0x0411},
- {0xa0, 0x10, ZC3XX_R087_EXPTIMEMID},
- {0xa0, 0x37, ZC3XX_R101_SENSORCORRECTION},
- {0xa0, 0x05, ZC3XX_R012_VIDEOCONTROLFUNC},
- {0xa0, 0x0d, ZC3XX_R100_OPERATIONMODE},
- {0xa0, 0x06, ZC3XX_R189_AWBSTATUS},
- {0xa0, 0x00, 0x01ad},
- {0xa0, 0x03, ZC3XX_R1C5_SHARPNESSMODE},
- {0xa0, 0x13, ZC3XX_R1CB_SHARPNESS05},
- {0xa0, 0x08, ZC3XX_R250_DEADPIXELSMODE},
- {0xa0, 0x08, ZC3XX_R301_EEPROMACCESS},
- {0xa0, 0x60, ZC3XX_R1A8_DIGITALGAIN},
- {0xa0, 0x6c, ZC3XX_R18D_YTARGET},
- {0xa1, 0x01, 0x0002},
- {0xa0, 0x09, 0x01ad},
- {0xa0, 0x15, 0x01ae},
- {0xa0, 0x00, ZC3XX_R092_I2CADDRESSSELECT},
- {0xa0, 0x02, ZC3XX_R090_I2CCOMMAND},
- {0xa1, 0x01, 0x0091},
- {0xa1, 0x01, 0x0095},
- {0xa1, 0x01, 0x0096},
- {0xa0, 0x50, ZC3XX_R10A_RGB00}, /* matrix */
- {0xa0, 0xf8, ZC3XX_R10B_RGB01},
- {0xa0, 0xf8, ZC3XX_R10C_RGB02},
- {0xa0, 0xf8, ZC3XX_R10D_RGB10},
- {0xa0, 0x50, ZC3XX_R10E_RGB11},
- {0xa0, 0xf8, ZC3XX_R10F_RGB12},
- {0xa0, 0xf8, ZC3XX_R110_RGB20},
- {0xa0, 0xf8, ZC3XX_R111_RGB21},
- {0xa0, 0x50, ZC3XX_R112_RGB22},
- {0xa1, 0x01, 0x0008},
- {0xa0, 0x03, ZC3XX_R008_CLOCKSETTING}, /* clock ? */
- {0xa0, 0x08, ZC3XX_R1C6_SHARPNESS00}, /* sharpness+ */
- {0xa1, 0x01, 0x01c8},
- {0xa1, 0x01, 0x01c9},
- {0xa1, 0x01, 0x01ca},
- {0xa0, 0x0f, ZC3XX_R1CB_SHARPNESS05}, /* sharpness- */
-
- {0xa0, 0x50, ZC3XX_R10A_RGB00}, /* matrix */
- {0xa0, 0xf8, ZC3XX_R10B_RGB01},
- {0xa0, 0xf8, ZC3XX_R10C_RGB02},
- {0xa0, 0xf8, ZC3XX_R10D_RGB10},
- {0xa0, 0x50, ZC3XX_R10E_RGB11},
- {0xa0, 0xf8, ZC3XX_R10F_RGB12},
- {0xa0, 0xf8, ZC3XX_R110_RGB20},
- {0xa0, 0xf8, ZC3XX_R111_RGB21},
- {0xa0, 0x50, ZC3XX_R112_RGB22},
- {0xa1, 0x01, 0x0180},
- {0xa0, 0x00, ZC3XX_R180_AUTOCORRECTENABLE},
- {0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
- {0xaa, 0x05, 0x0066},
- {0xaa, 0x09, 0x02b2},
- {0xaa, 0x10, 0x0002},
- {0xa0, 0x60, ZC3XX_R11D_GLOBALGAIN},
- {0xa0, 0x00, ZC3XX_R190_EXPOSURELIMITHIGH},
- {0xa0, 0x07, ZC3XX_R191_EXPOSURELIMITMID},
- {0xa0, 0x8c, ZC3XX_R192_EXPOSURELIMITLOW},
- {0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH},
- {0xa0, 0x00, ZC3XX_R196_ANTIFLICKERMID},
- {0xa0, 0x8a, ZC3XX_R197_ANTIFLICKERLOW},
- {0xa0, 0x10, ZC3XX_R18C_AEFREEZE},
- {0xa0, 0x20, ZC3XX_R18F_AEUNFREEZE},
- {0xa0, 0x14, ZC3XX_R1A9_DIGITALLIMITDIFF},
- {0xa0, 0x24, ZC3XX_R1AA_DIGITALGAINSTEP},
- {0xa0, 0xd7, ZC3XX_R01D_HSYNC_0},
- {0xa0, 0xf0, ZC3XX_R01E_HSYNC_1},
- {0xa0, 0xf8, ZC3XX_R01F_HSYNC_2},
- {0xa0, 0xff, ZC3XX_R020_HSYNC_3},
- {0xa0, 0x09, 0x01ad},
- {0xa0, 0x15, 0x01ae},
- {0xa0, 0x40, ZC3XX_R180_AUTOCORRECTENABLE},
- {0xa1, 0x01, 0x0180},
- {0xa0, 0x42, ZC3XX_R180_AUTOCORRECTENABLE},
- {0xa1, 0x01, 0x0008},
- {0xa1, 0x01, 0x0007},
-/* {0xa0, 0x30, 0x0007}, */
-/* {0xa0, 0x00, 0x0007}, */
+ {0xa0, 0x78, ZC3XX_R18D_YTARGET}, /*jfm: was 6c*/
{}
};
static const struct usb_action pb0330_50HZ[] = {
- {0xa0, 0x00, ZC3XX_R190_EXPOSURELIMITHIGH}, /* 01,90,00,cc */
- {0xa0, 0x07, ZC3XX_R191_EXPOSURELIMITMID}, /* 01,91,07,cc */
- {0xa0, 0xee, ZC3XX_R192_EXPOSURELIMITLOW}, /* 01,92,ee,cc */
- {0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH}, /* 01,95,00,cc */
- {0xa0, 0x00, ZC3XX_R196_ANTIFLICKERMID}, /* 01,96,00,cc */
- {0xa0, 0x46, ZC3XX_R197_ANTIFLICKERLOW}, /* 01,97,46,cc */
- {0xa0, 0x10, ZC3XX_R18C_AEFREEZE}, /* 01,8c,10,cc */
- {0xa0, 0x20, ZC3XX_R18F_AEUNFREEZE}, /* 01,8f,20,cc */
- {0xa0, 0x0c, ZC3XX_R1A9_DIGITALLIMITDIFF}, /* 01,a9,0c,cc */
- {0xa0, 0x26, ZC3XX_R1AA_DIGITALGAINSTEP}, /* 01,aa,26,cc */
- {0xa0, 0x68, ZC3XX_R01D_HSYNC_0}, /* 00,1d,68,cc */
- {0xa0, 0x90, ZC3XX_R01E_HSYNC_1}, /* 00,1e,90,cc */
- {0xa0, 0xc8, ZC3XX_R01F_HSYNC_2}, /* 00,1f,c8,cc */
+ {0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
+ {0xbb, 0x00, 0x055c},
+ {0xbb, 0x01, 0x09aa},
+ {0xbb, 0x00, 0x1001},
+ {0xa0, 0x60, ZC3XX_R11D_GLOBALGAIN},
+ {0xa0, 0x00, ZC3XX_R190_EXPOSURELIMITHIGH},
+ {0xa0, 0x07, ZC3XX_R191_EXPOSURELIMITMID},
+ {0xa0, 0xc4, ZC3XX_R192_EXPOSURELIMITLOW},
+ {0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH},
+ {0xa0, 0x00, ZC3XX_R196_ANTIFLICKERMID},
+ {0xa0, 0x47, ZC3XX_R197_ANTIFLICKERLOW},
+ {0xa0, 0x0e, ZC3XX_R18C_AEFREEZE},
+ {0xa0, 0x1a, ZC3XX_R18F_AEUNFREEZE},
+ {0xa0, 0x14, ZC3XX_R1A9_DIGITALLIMITDIFF},
+ {0xa0, 0x66, ZC3XX_R1AA_DIGITALGAINSTEP},
+ {0xa0, 0x5c, ZC3XX_R01D_HSYNC_0},
+ {0xa0, 0x90, ZC3XX_R01E_HSYNC_1},
+ {0xa0, 0xc8, ZC3XX_R01F_HSYNC_2},
+ {0xa0, 0xff, ZC3XX_R020_HSYNC_3},
{}
};
static const struct usb_action pb0330_50HZScale[] = {
- {0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS}, /* 00,19,00,cc */
- {0xa0, 0x00, ZC3XX_R190_EXPOSURELIMITHIGH}, /* 01,90,00,cc */
- {0xa0, 0x07, ZC3XX_R191_EXPOSURELIMITMID}, /* 01,91,07,cc */
- {0xa0, 0xa0, ZC3XX_R192_EXPOSURELIMITLOW}, /* 01,92,a0,cc */
- {0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH}, /* 01,95,00,cc */
- {0xa0, 0x00, ZC3XX_R196_ANTIFLICKERMID}, /* 01,96,00,cc */
- {0xa0, 0x7a, ZC3XX_R197_ANTIFLICKERLOW}, /* 01,97,7a,cc */
- {0xa0, 0x10, ZC3XX_R18C_AEFREEZE}, /* 01,8c,10,cc */
- {0xa0, 0x20, ZC3XX_R18F_AEUNFREEZE}, /* 01,8f,20,cc */
- {0xa0, 0x0c, ZC3XX_R1A9_DIGITALLIMITDIFF}, /* 01,a9,0c,cc */
- {0xa0, 0x26, ZC3XX_R1AA_DIGITALGAINSTEP}, /* 01,aa,26,cc */
- {0xa0, 0xe5, ZC3XX_R01D_HSYNC_0}, /* 00,1d,e5,cc */
- {0xa0, 0xf0, ZC3XX_R01E_HSYNC_1}, /* 00,1e,f0,cc */
- {0xa0, 0xf8, ZC3XX_R01F_HSYNC_2}, /* 00,1f,f8,cc */
+ {0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
+ {0xbb, 0x00, 0x0566},
+ {0xbb, 0x02, 0x09b2},
+ {0xbb, 0x00, 0x1002},
+ {0xa0, 0x60, ZC3XX_R11D_GLOBALGAIN},
+ {0xa0, 0x00, ZC3XX_R190_EXPOSURELIMITHIGH},
+ {0xa0, 0x07, ZC3XX_R191_EXPOSURELIMITMID},
+ {0xa0, 0x8c, ZC3XX_R192_EXPOSURELIMITLOW},
+ {0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH},
+ {0xa0, 0x00, ZC3XX_R196_ANTIFLICKERMID},
+ {0xa0, 0x8a, ZC3XX_R197_ANTIFLICKERLOW},
+ {0xa0, 0x0e, ZC3XX_R18C_AEFREEZE},
+ {0xa0, 0x1a, ZC3XX_R18F_AEUNFREEZE},
+ {0xa0, 0x14, ZC3XX_R1A9_DIGITALLIMITDIFF},
+ {0xa0, 0x66, ZC3XX_R1AA_DIGITALGAINSTEP},
+ {0xa0, 0xd7, ZC3XX_R01D_HSYNC_0},
+ {0xa0, 0xf0, ZC3XX_R01E_HSYNC_1},
+ {0xa0, 0xf8, ZC3XX_R01F_HSYNC_2},
+ {0xa0, 0xff, ZC3XX_R020_HSYNC_3},
{}
};
static const struct usb_action pb0330_60HZ[] = {
- {0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS}, /* 00,19,00,cc */
- {0xa0, 0x00, ZC3XX_R190_EXPOSURELIMITHIGH}, /* 01,90,00,cc */
- {0xa0, 0x07, ZC3XX_R191_EXPOSURELIMITMID}, /* 01,91,07,cc */
- {0xa0, 0xdd, ZC3XX_R192_EXPOSURELIMITLOW}, /* 01,92,dd,cc */
- {0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH}, /* 01,95,00,cc */
- {0xa0, 0x00, ZC3XX_R196_ANTIFLICKERMID}, /* 01,96,00,cc */
- {0xa0, 0x3d, ZC3XX_R197_ANTIFLICKERLOW}, /* 01,97,3d,cc */
- {0xa0, 0x10, ZC3XX_R18C_AEFREEZE}, /* 01,8c,10,cc */
- {0xa0, 0x20, ZC3XX_R18F_AEUNFREEZE}, /* 01,8f,20,cc */
- {0xa0, 0x0c, ZC3XX_R1A9_DIGITALLIMITDIFF}, /* 01,a9,0c,cc */
- {0xa0, 0x26, ZC3XX_R1AA_DIGITALGAINSTEP}, /* 01,aa,26,cc */
- {0xa0, 0x43, ZC3XX_R01D_HSYNC_0}, /* 00,1d,43,cc */
- {0xa0, 0x50, ZC3XX_R01E_HSYNC_1}, /* 00,1e,50,cc */
- {0xa0, 0x90, ZC3XX_R01F_HSYNC_2}, /* 00,1f,90,cc */
+ {0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
+ {0xbb, 0x00, 0x0535},
+ {0xbb, 0x01, 0x0974},
+ {0xbb, 0x00, 0x1001},
+ {0xa0, 0x60, ZC3XX_R11D_GLOBALGAIN},
+ {0xa0, 0x00, ZC3XX_R190_EXPOSURELIMITHIGH},
+ {0xa0, 0x07, ZC3XX_R191_EXPOSURELIMITMID},
+ {0xa0, 0xfe, ZC3XX_R192_EXPOSURELIMITLOW},
+ {0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH},
+ {0xa0, 0x00, ZC3XX_R196_ANTIFLICKERMID},
+ {0xa0, 0x3e, ZC3XX_R197_ANTIFLICKERLOW},
+ {0xa0, 0x0e, ZC3XX_R18C_AEFREEZE},
+ {0xa0, 0x1a, ZC3XX_R18F_AEUNFREEZE},
+ {0xa0, 0x14, ZC3XX_R1A9_DIGITALLIMITDIFF},
+ {0xa0, 0x66, ZC3XX_R1AA_DIGITALGAINSTEP},
+ {0xa0, 0x35, ZC3XX_R01D_HSYNC_0},
+ {0xa0, 0x50, ZC3XX_R01E_HSYNC_1},
+ {0xa0, 0x90, ZC3XX_R01F_HSYNC_2},
+ {0xa0, 0xd0, ZC3XX_R020_HSYNC_3},
{}
};
static const struct usb_action pb0330_60HZScale[] = {
- {0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS}, /* 00,19,00,cc */
- {0xa0, 0x00, ZC3XX_R190_EXPOSURELIMITHIGH}, /* 01,90,00,cc */
- {0xa0, 0x07, ZC3XX_R191_EXPOSURELIMITMID}, /* 01,91,07,cc */
- {0xa0, 0xa0, ZC3XX_R192_EXPOSURELIMITLOW}, /* 01,92,a0,cc */
- {0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH}, /* 01,95,00,cc */
- {0xa0, 0x00, ZC3XX_R196_ANTIFLICKERMID}, /* 01,96,00,cc */
- {0xa0, 0x7a, ZC3XX_R197_ANTIFLICKERLOW}, /* 01,97,7a,cc */
- {0xa0, 0x10, ZC3XX_R18C_AEFREEZE}, /* 01,8c,10,cc */
- {0xa0, 0x20, ZC3XX_R18F_AEUNFREEZE}, /* 01,8f,20,cc */
- {0xa0, 0x0c, ZC3XX_R1A9_DIGITALLIMITDIFF}, /* 01,a9,0c,cc */
- {0xa0, 0x26, ZC3XX_R1AA_DIGITALGAINSTEP}, /* 01,aa,26,cc */
- {0xa0, 0x41, ZC3XX_R01D_HSYNC_0}, /* 00,1d,41,cc */
- {0xa0, 0x50, ZC3XX_R01E_HSYNC_1}, /* 00,1e,50,cc */
- {0xa0, 0x90, ZC3XX_R01F_HSYNC_2}, /* 00,1f,90,cc */
+ {0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
+ {0xbb, 0x00, 0x0535},
+ {0xbb, 0x02, 0x096c},
+ {0xbb, 0x00, 0x1002},
+ {0xa0, 0x60, ZC3XX_R11D_GLOBALGAIN},
+ {0xa0, 0x00, ZC3XX_R190_EXPOSURELIMITHIGH},
+ {0xa0, 0x07, ZC3XX_R191_EXPOSURELIMITMID},
+ {0xa0, 0xc0, ZC3XX_R192_EXPOSURELIMITLOW},
+ {0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH},
+ {0xa0, 0x00, ZC3XX_R196_ANTIFLICKERMID},
+ {0xa0, 0x7c, ZC3XX_R197_ANTIFLICKERLOW},
+ {0xa0, 0x0e, ZC3XX_R18C_AEFREEZE},
+ {0xa0, 0x1a, ZC3XX_R18F_AEUNFREEZE},
+ {0xa0, 0x14, ZC3XX_R1A9_DIGITALLIMITDIFF},
+ {0xa0, 0x66, ZC3XX_R1AA_DIGITALGAINSTEP},
+ {0xa0, 0x35, ZC3XX_R01D_HSYNC_0},
+ {0xa0, 0x50, ZC3XX_R01E_HSYNC_1},
+ {0xa0, 0x90, ZC3XX_R01F_HSYNC_2},
+ {0xa0, 0xd0, ZC3XX_R020_HSYNC_3},
{}
};
static const struct usb_action pb0330_NoFliker[] = {
- {0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS}, /* 00,19,00,cc */
- {0xa0, 0x00, ZC3XX_R190_EXPOSURELIMITHIGH}, /* 01,90,00,cc */
- {0xa0, 0x07, ZC3XX_R191_EXPOSURELIMITMID}, /* 01,91,07,cc */
- {0xa0, 0xf0, ZC3XX_R192_EXPOSURELIMITLOW}, /* 01,92,f0,cc */
- {0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH}, /* 01,95,00,cc */
- {0xa0, 0x00, ZC3XX_R196_ANTIFLICKERMID}, /* 01,96,00,cc */
- {0xa0, 0x10, ZC3XX_R197_ANTIFLICKERLOW}, /* 01,97,10,cc */
- {0xa0, 0x10, ZC3XX_R18C_AEFREEZE}, /* 01,8c,10,cc */
- {0xa0, 0x20, ZC3XX_R18F_AEUNFREEZE}, /* 01,8f,20,cc */
- {0xa0, 0x00, ZC3XX_R1A9_DIGITALLIMITDIFF}, /* 01,a9,00,cc */
- {0xa0, 0x00, ZC3XX_R1AA_DIGITALGAINSTEP}, /* 01,aa,00,cc */
- {0xa0, 0x09, ZC3XX_R01D_HSYNC_0}, /* 00,1d,09,cc */
- {0xa0, 0x40, ZC3XX_R01E_HSYNC_1}, /* 00,1e,40,cc */
- {0xa0, 0x90, ZC3XX_R01F_HSYNC_2}, /* 00,1f,90,cc */
+ {0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
+ {0xbb, 0x00, 0x0509},
+ {0xbb, 0x02, 0x0940},
+ {0xbb, 0x00, 0x1002},
+ {0xa0, 0x60, ZC3XX_R11D_GLOBALGAIN},
+ {0xa0, 0x00, ZC3XX_R190_EXPOSURELIMITHIGH},
+ {0xa0, 0x07, ZC3XX_R191_EXPOSURELIMITMID},
+ {0xa0, 0xf0, ZC3XX_R192_EXPOSURELIMITLOW},
+ {0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH},
+ {0xa0, 0x00, ZC3XX_R196_ANTIFLICKERMID},
+ {0xa0, 0x01, ZC3XX_R197_ANTIFLICKERLOW},
+ {0xa0, 0x10, ZC3XX_R18C_AEFREEZE},
+ {0xa0, 0x20, ZC3XX_R18F_AEUNFREEZE},
+ {0xa0, 0x00, ZC3XX_R1A9_DIGITALLIMITDIFF},
+ {0xa0, 0x00, ZC3XX_R1AA_DIGITALGAINSTEP},
+ {0xa0, 0x09, ZC3XX_R01D_HSYNC_0},
+ {0xa0, 0x40, ZC3XX_R01E_HSYNC_1},
+ {0xa0, 0x90, ZC3XX_R01F_HSYNC_2},
+ {0xa0, 0xe0, ZC3XX_R020_HSYNC_3},
{}
};
static const struct usb_action pb0330_NoFlikerScale[] = {
- {0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS}, /* 00,19,00,cc */
- {0xa0, 0x00, ZC3XX_R190_EXPOSURELIMITHIGH}, /* 01,90,00,cc */
- {0xa0, 0x07, ZC3XX_R191_EXPOSURELIMITMID}, /* 01,91,07,cc */
- {0xa0, 0xf0, ZC3XX_R192_EXPOSURELIMITLOW}, /* 01,92,f0,cc */
- {0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH}, /* 01,95,00,cc */
- {0xa0, 0x00, ZC3XX_R196_ANTIFLICKERMID}, /* 01,96,00,cc */
- {0xa0, 0x10, ZC3XX_R197_ANTIFLICKERLOW}, /* 01,97,10,cc */
- {0xa0, 0x10, ZC3XX_R18C_AEFREEZE}, /* 01,8c,10,cc */
- {0xa0, 0x20, ZC3XX_R18F_AEUNFREEZE}, /* 01,8f,20,cc */
- {0xa0, 0x00, ZC3XX_R1A9_DIGITALLIMITDIFF}, /* 01,a9,00,cc */
- {0xa0, 0x00, ZC3XX_R1AA_DIGITALGAINSTEP}, /* 01,aa,00,cc */
- {0xa0, 0x09, ZC3XX_R01D_HSYNC_0}, /* 00,1d,09,cc */
- {0xa0, 0x40, ZC3XX_R01E_HSYNC_1}, /* 00,1e,40,cc */
- {0xa0, 0x90, ZC3XX_R01F_HSYNC_2}, /* 00,1f,90,cc */
+ {0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
+ {0xbb, 0x00, 0x0535},
+ {0xbb, 0x01, 0x0980},
+ {0xbb, 0x00, 0x1001},
+ {0xa0, 0x60, ZC3XX_R11D_GLOBALGAIN},
+ {0xa0, 0x00, ZC3XX_R190_EXPOSURELIMITHIGH},
+ {0xa0, 0x07, ZC3XX_R191_EXPOSURELIMITMID},
+ {0xa0, 0xf0, ZC3XX_R192_EXPOSURELIMITLOW},
+ {0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH},
+ {0xa0, 0x00, ZC3XX_R196_ANTIFLICKERMID},
+ {0xa0, 0x01, ZC3XX_R197_ANTIFLICKERLOW},
+ {0xa0, 0x10, ZC3XX_R18C_AEFREEZE},
+ {0xa0, 0x20, ZC3XX_R18F_AEUNFREEZE},
+ {0xa0, 0x00, ZC3XX_R1A9_DIGITALLIMITDIFF},
+ {0xa0, 0x00, ZC3XX_R1AA_DIGITALGAINSTEP},
+ {0xa0, 0x35, ZC3XX_R01D_HSYNC_0},
+ {0xa0, 0x60, ZC3XX_R01E_HSYNC_1},
+ {0xa0, 0x90, ZC3XX_R01F_HSYNC_2},
+ {0xa0, 0xe0, ZC3XX_R020_HSYNC_3},
{}
};
@@ -5655,7 +5335,7 @@
{}
};
-static const struct usb_action tas5130cxx_Initial[] = {
+static const struct usb_action tas5130cxx_InitialScale[] = { /* 320x240 */
{0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL},
{0xa0, 0x50, ZC3XX_R002_CLOCKSELECT},
{0xa0, 0x03, ZC3XX_R008_CLOCKSETTING},
@@ -5684,74 +5364,19 @@
{0xa0, 0xf7, ZC3XX_R101_SENSORCORRECTION},
{0xa0, 0x0d, ZC3XX_R100_OPERATIONMODE},
{0xa0, 0x06, ZC3XX_R189_AWBSTATUS},
- {0xa0, 0x68, ZC3XX_R18D_YTARGET},
- {0xa0, 0x60, ZC3XX_R1A8_DIGITALGAIN},
+ {0xa0, 0x95, ZC3XX_R18D_YTARGET},
+ {0xa0, 0x50, ZC3XX_R1A8_DIGITALGAIN},
{0xa0, 0x00, 0x01ad},
{0xa0, 0x03, ZC3XX_R1C5_SHARPNESSMODE},
{0xa0, 0x13, ZC3XX_R1CB_SHARPNESS05},
{0xa0, 0x08, ZC3XX_R250_DEADPIXELSMODE},
{0xa0, 0x08, ZC3XX_R301_EEPROMACCESS},
- {0xa1, 0x01, 0x0002},
- {0xa1, 0x01, 0x0008},
- {0xa0, 0x03, ZC3XX_R008_CLOCKSETTING}, /* clock ? */
- {0xa0, 0x08, ZC3XX_R1C6_SHARPNESS00}, /* sharpness+ */
- {0xa1, 0x01, 0x01c8},
- {0xa1, 0x01, 0x01c9},
- {0xa1, 0x01, 0x01ca},
- {0xa0, 0x0f, ZC3XX_R1CB_SHARPNESS05}, /* sharpness- */
-
- {0xa0, 0x68, ZC3XX_R10A_RGB00}, /* matrix */
- {0xa0, 0xec, ZC3XX_R10B_RGB01},
- {0xa0, 0xec, ZC3XX_R10C_RGB02},
- {0xa0, 0xec, ZC3XX_R10D_RGB10},
- {0xa0, 0x68, ZC3XX_R10E_RGB11},
- {0xa0, 0xec, ZC3XX_R10F_RGB12},
- {0xa0, 0xec, ZC3XX_R110_RGB20},
- {0xa0, 0xec, ZC3XX_R111_RGB21},
- {0xa0, 0x68, ZC3XX_R112_RGB22},
-
- {0xa1, 0x01, 0x018d},
- {0xa0, 0x90, ZC3XX_R18D_YTARGET}, /* 90 */
- {0xa1, 0x01, 0x0180},
- {0xa0, 0x00, ZC3XX_R180_AUTOCORRECTENABLE},
- {0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
-
- {0xaa, 0xa3, 0x0001},
- {0xaa, 0xa4, 0x0077},
- {0xa0, 0x01, ZC3XX_R0A3_EXPOSURETIMEHIGH},
- {0xa0, 0x77, ZC3XX_R0A4_EXPOSURETIMELOW},
-
- {0xa0, 0x00, ZC3XX_R190_EXPOSURELIMITHIGH}, /* 00 */
- {0xa0, 0x03, ZC3XX_R191_EXPOSURELIMITMID}, /* 03 */
- {0xa0, 0xe8, ZC3XX_R192_EXPOSURELIMITLOW}, /* e8 */
- {0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH}, /* 0 */
- {0xa0, 0x00, ZC3XX_R196_ANTIFLICKERMID}, /* 0 */
- {0xa0, 0x7d, ZC3XX_R197_ANTIFLICKERLOW}, /* 7d */
-
- {0xa0, 0x0c, ZC3XX_R18C_AEFREEZE},
- {0xa0, 0x18, ZC3XX_R18F_AEUNFREEZE},
- {0xa0, 0x08, ZC3XX_R1A9_DIGITALLIMITDIFF}, /* 08 */
- {0xa0, 0x24, ZC3XX_R1AA_DIGITALGAINSTEP}, /* 24 */
- {0xa0, 0xf0, ZC3XX_R01D_HSYNC_0},
- {0xa0, 0xf4, ZC3XX_R01E_HSYNC_1},
- {0xa0, 0xf8, ZC3XX_R01F_HSYNC_2},
- {0xa0, 0xff, ZC3XX_R020_HSYNC_3},
- {0xa0, 0x03, ZC3XX_R09F_MAXXHIGH},
- {0xa0, 0xc0, ZC3XX_R0A0_MAXXLOW},
- {0xa0, 0x50, ZC3XX_R11D_GLOBALGAIN}, /* 50 */
- {0xa0, 0x40, ZC3XX_R180_AUTOCORRECTENABLE},
- {0xa1, 0x01, 0x0180},
- {0xa0, 0x42, ZC3XX_R180_AUTOCORRECTENABLE},
{}
};
-static const struct usb_action tas5130cxx_InitialScale[] = {
-/*?? {0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL}, */
+static const struct usb_action tas5130cxx_Initial[] = { /* 640x480 */
{0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL},
{0xa0, 0x40, ZC3XX_R002_CLOCKSELECT},
-
{0xa0, 0x03, ZC3XX_R008_CLOCKSETTING},
- {0xa1, 0x01, 0x0008},
-
{0xa0, 0x02, ZC3XX_R010_CMOSSENSORSELECT},
{0xa0, 0x01, ZC3XX_R001_SYSTEMOPERATING},
{0xa0, 0x00, ZC3XX_R001_SYSTEMOPERATING},
@@ -5775,63 +5400,13 @@
{0xa0, 0x37, ZC3XX_R101_SENSORCORRECTION},
{0xa0, 0x0d, ZC3XX_R100_OPERATIONMODE},
{0xa0, 0x06, ZC3XX_R189_AWBSTATUS},
- {0xa0, 0x68, ZC3XX_R18D_YTARGET},
- {0xa0, 0x60, ZC3XX_R1A8_DIGITALGAIN},
+ {0xa0, 0x95, ZC3XX_R18D_YTARGET},
+ {0xa0, 0x50, ZC3XX_R1A8_DIGITALGAIN},
{0xa0, 0x00, 0x01ad},
{0xa0, 0x03, ZC3XX_R1C5_SHARPNESSMODE},
{0xa0, 0x13, ZC3XX_R1CB_SHARPNESS05},
{0xa0, 0x08, ZC3XX_R250_DEADPIXELSMODE},
{0xa0, 0x08, ZC3XX_R301_EEPROMACCESS},
- {0xa1, 0x01, 0x0002},
- {0xa1, 0x01, 0x0008},
-
- {0xa0, 0x03, ZC3XX_R008_CLOCKSETTING},
- {0xa1, 0x01, 0x0008}, /* clock ? */
- {0xa0, 0x08, ZC3XX_R1C6_SHARPNESS00}, /* sharpness+ */
- {0xa1, 0x01, 0x01c8},
- {0xa1, 0x01, 0x01c9},
- {0xa1, 0x01, 0x01ca},
- {0xa0, 0x0f, ZC3XX_R1CB_SHARPNESS05}, /* sharpness- */
-
- {0xa0, 0x68, ZC3XX_R10A_RGB00}, /* matrix */
- {0xa0, 0xec, ZC3XX_R10B_RGB01},
- {0xa0, 0xec, ZC3XX_R10C_RGB02},
- {0xa0, 0xec, ZC3XX_R10D_RGB10},
- {0xa0, 0x68, ZC3XX_R10E_RGB11},
- {0xa0, 0xec, ZC3XX_R10F_RGB12},
- {0xa0, 0xec, ZC3XX_R110_RGB20},
- {0xa0, 0xec, ZC3XX_R111_RGB21},
- {0xa0, 0x68, ZC3XX_R112_RGB22},
-
- {0xa1, 0x01, 0x018d},
- {0xa0, 0x90, ZC3XX_R18D_YTARGET},
- {0xa1, 0x01, 0x0180},
- {0xa0, 0x00, ZC3XX_R180_AUTOCORRECTENABLE},
- {0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
- {0xaa, 0xa3, 0x0001},
- {0xaa, 0xa4, 0x0063},
- {0xa0, 0x01, ZC3XX_R0A3_EXPOSURETIMEHIGH},
- {0xa0, 0x63, ZC3XX_R0A4_EXPOSURETIMELOW},
- {0xa0, 0x00, ZC3XX_R190_EXPOSURELIMITHIGH},
- {0xa0, 0x02, ZC3XX_R191_EXPOSURELIMITMID},
- {0xa0, 0x38, ZC3XX_R192_EXPOSURELIMITLOW},
- {0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH},
- {0xa0, 0x00, ZC3XX_R196_ANTIFLICKERMID},
- {0xa0, 0x47, ZC3XX_R197_ANTIFLICKERLOW},
- {0xa0, 0x0c, ZC3XX_R18C_AEFREEZE},
- {0xa0, 0x18, ZC3XX_R18F_AEUNFREEZE},
- {0xa0, 0x08, ZC3XX_R1A9_DIGITALLIMITDIFF},
- {0xa0, 0x24, ZC3XX_R1AA_DIGITALGAINSTEP},
- {0xa0, 0xd3, ZC3XX_R01D_HSYNC_0},
- {0xa0, 0xda, ZC3XX_R01E_HSYNC_1},
- {0xa0, 0xea, ZC3XX_R01F_HSYNC_2},
- {0xa0, 0xff, ZC3XX_R020_HSYNC_3},
- {0xa0, 0x03, ZC3XX_R09F_MAXXHIGH},
- {0xa0, 0x4c, ZC3XX_R0A0_MAXXLOW},
- {0xa0, 0x50, ZC3XX_R11D_GLOBALGAIN},
- {0xa0, 0x40, ZC3XX_R180_AUTOCORRECTENABLE},
- {0xa1, 0x01, 0x0180},
- {0xa0, 0x42, ZC3XX_R180_AUTOCORRECTENABLE},
{}
};
static const struct usb_action tas5130cxx_50HZ[] = {
@@ -5841,20 +5416,22 @@
{0xa0, 0x01, ZC3XX_R0A3_EXPOSURETIMEHIGH}, /* 00,a3,01,cc */
{0xa0, 0x63, ZC3XX_R0A4_EXPOSURETIMELOW}, /* 00,a4,63,cc */
{0xa0, 0x00, ZC3XX_R190_EXPOSURELIMITHIGH}, /* 01,90,00,cc */
- {0xa0, 0x02, ZC3XX_R191_EXPOSURELIMITMID}, /* 01,91,02,cc */
- {0xa0, 0x38, ZC3XX_R192_EXPOSURELIMITLOW}, /* 01,92,38,cc */
+ {0xa0, 0x04, ZC3XX_R191_EXPOSURELIMITMID},
+ {0xa0, 0xfe, ZC3XX_R192_EXPOSURELIMITLOW},
{0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH}, /* 01,95,00,cc */
{0xa0, 0x00, ZC3XX_R196_ANTIFLICKERMID}, /* 01,96,00,cc */
{0xa0, 0x47, ZC3XX_R197_ANTIFLICKERLOW}, /* 01,97,47,cc */
- {0xa0, 0x10, ZC3XX_R18C_AEFREEZE}, /* 01,8c,10,cc */
- {0xa0, 0x20, ZC3XX_R18F_AEUNFREEZE}, /* 01,8f,20,cc */
- {0xa0, 0x0c, ZC3XX_R1A9_DIGITALLIMITDIFF}, /* 01,a9,0c,cc */
- {0xa0, 0x26, ZC3XX_R1AA_DIGITALGAINSTEP}, /* 01,aa,26,cc */
+ {0xa0, 0x0c, ZC3XX_R18C_AEFREEZE},
+ {0xa0, 0x18, ZC3XX_R18F_AEUNFREEZE},
+ {0xa0, 0x08, ZC3XX_R1A9_DIGITALLIMITDIFF},
+ {0xa0, 0x24, ZC3XX_R1AA_DIGITALGAINSTEP},
{0xa0, 0xd3, ZC3XX_R01D_HSYNC_0}, /* 00,1d,d3,cc */
{0xa0, 0xda, ZC3XX_R01E_HSYNC_1}, /* 00,1e,da,cc */
{0xa0, 0xea, ZC3XX_R01F_HSYNC_2}, /* 00,1f,ea,cc */
{0xa0, 0xff, ZC3XX_R020_HSYNC_3}, /* 00,20,ff,cc */
{0xa0, 0x03, ZC3XX_R09F_MAXXHIGH}, /* 00,9f,03,cc */
+ {0xa0, 0x4c, ZC3XX_R0A0_MAXXLOW},
+ {0xa0, 0x50, ZC3XX_R11D_GLOBALGAIN},
{}
};
static const struct usb_action tas5130cxx_50HZScale[] = {
@@ -5864,20 +5441,22 @@
{0xa0, 0x01, ZC3XX_R0A3_EXPOSURETIMEHIGH}, /* 00,a3,01,cc */
{0xa0, 0x77, ZC3XX_R0A4_EXPOSURETIMELOW}, /* 00,a4,77,cc */
{0xa0, 0x00, ZC3XX_R190_EXPOSURELIMITHIGH}, /* 01,90,00,cc */
- {0xa0, 0x03, ZC3XX_R191_EXPOSURELIMITMID}, /* 01,91,03,cc */
- {0xa0, 0xe8, ZC3XX_R192_EXPOSURELIMITLOW}, /* 01,92,e8,cc */
+ {0xa0, 0x07, ZC3XX_R191_EXPOSURELIMITMID},
+ {0xa0, 0xd0, ZC3XX_R192_EXPOSURELIMITLOW},
{0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH}, /* 01,95,00,cc */
{0xa0, 0x00, ZC3XX_R196_ANTIFLICKERMID}, /* 01,96,00,cc */
{0xa0, 0x7d, ZC3XX_R197_ANTIFLICKERLOW}, /* 01,97,7d,cc */
- {0xa0, 0x14, ZC3XX_R18C_AEFREEZE}, /* 01,8c,14,cc */
- {0xa0, 0x20, ZC3XX_R18F_AEUNFREEZE}, /* 01,8f,20,cc */
- {0xa0, 0x0c, ZC3XX_R1A9_DIGITALLIMITDIFF}, /* 01,a9,0c,cc */
- {0xa0, 0x26, ZC3XX_R1AA_DIGITALGAINSTEP}, /* 01,aa,26,cc */
+ {0xa0, 0x0c, ZC3XX_R18C_AEFREEZE},
+ {0xa0, 0x18, ZC3XX_R18F_AEUNFREEZE},
+ {0xa0, 0x08, ZC3XX_R1A9_DIGITALLIMITDIFF},
+ {0xa0, 0x24, ZC3XX_R1AA_DIGITALGAINSTEP},
{0xa0, 0xf0, ZC3XX_R01D_HSYNC_0}, /* 00,1d,f0,cc */
{0xa0, 0xf4, ZC3XX_R01E_HSYNC_1}, /* 00,1e,f4,cc */
{0xa0, 0xf8, ZC3XX_R01F_HSYNC_2}, /* 00,1f,f8,cc */
{0xa0, 0xff, ZC3XX_R020_HSYNC_3}, /* 00,20,ff,cc */
{0xa0, 0x03, ZC3XX_R09F_MAXXHIGH}, /* 00,9f,03,cc */
+ {0xa0, 0xc0, ZC3XX_R0A0_MAXXLOW},
+ {0xa0, 0x50, ZC3XX_R11D_GLOBALGAIN},
{}
};
static const struct usb_action tas5130cxx_60HZ[] = {
@@ -5887,20 +5466,22 @@
{0xa0, 0x01, ZC3XX_R0A3_EXPOSURETIMEHIGH}, /* 00,a3,01,cc */
{0xa0, 0x36, ZC3XX_R0A4_EXPOSURETIMELOW}, /* 00,a4,36,cc */
{0xa0, 0x00, ZC3XX_R190_EXPOSURELIMITHIGH}, /* 01,90,00,cc */
- {0xa0, 0x01, ZC3XX_R191_EXPOSURELIMITMID}, /* 01,91,01,cc */
- {0xa0, 0xf0, ZC3XX_R192_EXPOSURELIMITLOW}, /* 01,92,f0,cc */
+ {0xa0, 0x05, ZC3XX_R191_EXPOSURELIMITMID},
+ {0xa0, 0x54, ZC3XX_R192_EXPOSURELIMITLOW},
{0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH}, /* 01,95,00,cc */
{0xa0, 0x00, ZC3XX_R196_ANTIFLICKERMID}, /* 01,96,00,cc */
{0xa0, 0x3e, ZC3XX_R197_ANTIFLICKERLOW}, /* 01,97,3e,cc */
- {0xa0, 0x10, ZC3XX_R18C_AEFREEZE}, /* 01,8c,10,cc */
- {0xa0, 0x20, ZC3XX_R18F_AEUNFREEZE}, /* 01,8f,20,cc */
- {0xa0, 0x0c, ZC3XX_R1A9_DIGITALLIMITDIFF}, /* 01,a9,0c,cc */
- {0xa0, 0x26, ZC3XX_R1AA_DIGITALGAINSTEP}, /* 01,aa,26,cc */
+ {0xa0, 0x0c, ZC3XX_R18C_AEFREEZE},
+ {0xa0, 0x18, ZC3XX_R18F_AEUNFREEZE},
+ {0xa0, 0x08, ZC3XX_R1A9_DIGITALLIMITDIFF},
+ {0xa0, 0x24, ZC3XX_R1AA_DIGITALGAINSTEP},
{0xa0, 0xca, ZC3XX_R01D_HSYNC_0}, /* 00,1d,ca,cc */
{0xa0, 0xd0, ZC3XX_R01E_HSYNC_1}, /* 00,1e,d0,cc */
{0xa0, 0xe0, ZC3XX_R01F_HSYNC_2}, /* 00,1f,e0,cc */
{0xa0, 0xff, ZC3XX_R020_HSYNC_3}, /* 00,20,ff,cc */
{0xa0, 0x03, ZC3XX_R09F_MAXXHIGH}, /* 00,9f,03,cc */
+ {0xa0, 0x28, ZC3XX_R0A0_MAXXLOW},
+ {0xa0, 0x50, ZC3XX_R11D_GLOBALGAIN},
{}
};
static const struct usb_action tas5130cxx_60HZScale[] = {
@@ -5910,20 +5491,22 @@
{0xa0, 0x01, ZC3XX_R0A3_EXPOSURETIMEHIGH}, /* 00,a3,01,cc */
{0xa0, 0x77, ZC3XX_R0A4_EXPOSURETIMELOW}, /* 00,a4,77,cc */
{0xa0, 0x00, ZC3XX_R190_EXPOSURELIMITHIGH}, /* 01,90,00,cc */
- {0xa0, 0x03, ZC3XX_R191_EXPOSURELIMITMID}, /* 01,91,03,cc */
- {0xa0, 0xe8, ZC3XX_R192_EXPOSURELIMITLOW}, /* 01,92,e8,cc */
+ {0xa0, 0x09, ZC3XX_R191_EXPOSURELIMITMID},
+ {0xa0, 0x47, ZC3XX_R192_EXPOSURELIMITLOW},
{0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH}, /* 01,95,00,cc */
{0xa0, 0x00, ZC3XX_R196_ANTIFLICKERMID}, /* 01,96,00,cc */
{0xa0, 0x7d, ZC3XX_R197_ANTIFLICKERLOW}, /* 01,97,7d,cc */
- {0xa0, 0x14, ZC3XX_R18C_AEFREEZE}, /* 01,8c,14,cc */
- {0xa0, 0x20, ZC3XX_R18F_AEUNFREEZE}, /* 01,8f,20,cc */
- {0xa0, 0x0c, ZC3XX_R1A9_DIGITALLIMITDIFF}, /* 01,a9,0c,cc */
- {0xa0, 0x26, ZC3XX_R1AA_DIGITALGAINSTEP}, /* 01,aa,26,cc */
+ {0xa0, 0x0c, ZC3XX_R18C_AEFREEZE},
+ {0xa0, 0x18, ZC3XX_R18F_AEUNFREEZE},
+ {0xa0, 0x08, ZC3XX_R1A9_DIGITALLIMITDIFF},
+ {0xa0, 0x24, ZC3XX_R1AA_DIGITALGAINSTEP},
{0xa0, 0xc8, ZC3XX_R01D_HSYNC_0}, /* 00,1d,c8,cc */
{0xa0, 0xd0, ZC3XX_R01E_HSYNC_1}, /* 00,1e,d0,cc */
{0xa0, 0xe0, ZC3XX_R01F_HSYNC_2}, /* 00,1f,e0,cc */
{0xa0, 0xff, ZC3XX_R020_HSYNC_3}, /* 00,20,ff,cc */
{0xa0, 0x03, ZC3XX_R09F_MAXXHIGH}, /* 00,9f,03,cc */
+ {0xa0, 0x20, ZC3XX_R0A0_MAXXLOW},
+ {0xa0, 0x50, ZC3XX_R11D_GLOBALGAIN},
{}
};
static const struct usb_action tas5130cxx_NoFliker[] = {
@@ -5933,13 +5516,13 @@
{0xa0, 0x01, ZC3XX_R0A3_EXPOSURETIMEHIGH}, /* 00,a3,01,cc */
{0xa0, 0x40, ZC3XX_R0A4_EXPOSURETIMELOW}, /* 00,a4,40,cc */
{0xa0, 0x00, ZC3XX_R190_EXPOSURELIMITHIGH}, /* 01,90,00,cc */
- {0xa0, 0x01, ZC3XX_R191_EXPOSURELIMITMID}, /* 01,91,01,cc */
- {0xa0, 0xf0, ZC3XX_R192_EXPOSURELIMITLOW}, /* 01,92,f0,cc */
- {0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH}, /* 01,95,00,cc */
- {0xa0, 0x00, ZC3XX_R196_ANTIFLICKERMID}, /* 01,96,00,cc */
- {0xa0, 0x10, ZC3XX_R197_ANTIFLICKERLOW}, /* 01,97,10,cc */
- {0xa0, 0x10, ZC3XX_R18C_AEFREEZE}, /* 01,8c,10,cc */
- {0xa0, 0x20, ZC3XX_R18F_AEUNFREEZE}, /* 01,8f,20,cc */
+ {0xa0, 0x05, ZC3XX_R191_EXPOSURELIMITMID},
+ {0xa0, 0xa0, ZC3XX_R192_EXPOSURELIMITLOW},
+ {0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH},
+ {0xa0, 0x00, ZC3XX_R196_ANTIFLICKERMID},
+ {0xa0, 0x04, ZC3XX_R197_ANTIFLICKERLOW},
+ {0xa0, 0x0c, ZC3XX_R18C_AEFREEZE},
+ {0xa0, 0x18, ZC3XX_R18F_AEUNFREEZE},
{0xa0, 0x00, ZC3XX_R1A9_DIGITALLIMITDIFF}, /* 01,a9,00,cc */
{0xa0, 0x00, ZC3XX_R1AA_DIGITALGAINSTEP}, /* 01,aa,00,cc */
{0xa0, 0xbc, ZC3XX_R01D_HSYNC_0}, /* 00,1d,bc,cc */
@@ -5947,6 +5530,8 @@
{0xa0, 0xe0, ZC3XX_R01F_HSYNC_2}, /* 00,1f,e0,cc */
{0xa0, 0xff, ZC3XX_R020_HSYNC_3}, /* 00,20,ff,cc */
{0xa0, 0x02, ZC3XX_R09F_MAXXHIGH}, /* 00,9f,02,cc */
+ {0xa0, 0xf0, ZC3XX_R0A0_MAXXLOW},
+ {0xa0, 0x50, ZC3XX_R11D_GLOBALGAIN},
{}
};
@@ -5957,13 +5542,13 @@
{0xa0, 0x01, ZC3XX_R0A3_EXPOSURETIMEHIGH}, /* 00,a3,01,cc */
{0xa0, 0x90, ZC3XX_R0A4_EXPOSURETIMELOW}, /* 00,a4,90,cc */
{0xa0, 0x00, ZC3XX_R190_EXPOSURELIMITHIGH}, /* 01,90,00,cc */
- {0xa0, 0x03, ZC3XX_R191_EXPOSURELIMITMID}, /* 01,91,03,cc */
- {0xa0, 0xf0, ZC3XX_R192_EXPOSURELIMITLOW}, /* 01,92,f0,cc */
- {0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH}, /* 01,95,00,cc */
- {0xa0, 0x00, ZC3XX_R196_ANTIFLICKERMID}, /* 01,96,00,cc */
- {0xa0, 0x10, ZC3XX_R197_ANTIFLICKERLOW}, /* 01,97,10,cc */
- {0xa0, 0x10, ZC3XX_R18C_AEFREEZE}, /* 01,8c,10,cc */
- {0xa0, 0x20, ZC3XX_R18F_AEUNFREEZE}, /* 01,8f,20,cc */
+ {0xa0, 0x0a, ZC3XX_R191_EXPOSURELIMITMID},
+ {0xa0, 0x00, ZC3XX_R192_EXPOSURELIMITLOW},
+ {0xa0, 0x00, ZC3XX_R195_ANTIFLICKERHIGH},
+ {0xa0, 0x00, ZC3XX_R196_ANTIFLICKERMID},
+ {0xa0, 0x04, ZC3XX_R197_ANTIFLICKERLOW},
+ {0xa0, 0x0c, ZC3XX_R18C_AEFREEZE},
+ {0xa0, 0x18, ZC3XX_R18F_AEUNFREEZE},
{0xa0, 0x00, ZC3XX_R1A9_DIGITALLIMITDIFF}, /* 01,a9,00,cc */
{0xa0, 0x00, ZC3XX_R1AA_DIGITALGAINSTEP}, /* 01,aa,00,cc */
{0xa0, 0xbc, ZC3XX_R01D_HSYNC_0}, /* 00,1d,bc,cc */
@@ -5971,6 +5556,8 @@
{0xa0, 0xe0, ZC3XX_R01F_HSYNC_2}, /* 00,1f,e0,cc */
{0xa0, 0xff, ZC3XX_R020_HSYNC_3}, /* 00,20,ff,cc */
{0xa0, 0x02, ZC3XX_R09F_MAXXHIGH}, /* 00,9f,02,cc */
+ {0xa0, 0xf0, ZC3XX_R0A0_MAXXLOW},
+ {0xa0, 0x50, ZC3XX_R11D_GLOBALGAIN},
{}
};
@@ -6303,8 +5890,10 @@
reg_w_i(gspca_dev->dev, reg, 0x0092);
reg_w_i(gspca_dev->dev, 0x02, 0x0090); /* <- read command */
- msleep(25);
+ msleep(20);
retbyte = reg_r_i(gspca_dev, 0x0091); /* read status */
+ if (retbyte != 0x00)
+ err("i2c_r status error %02x", retbyte);
retval = reg_r_i(gspca_dev, 0x0095); /* read Lowbyte */
retval |= reg_r_i(gspca_dev, 0x0096) << 8; /* read Hightbyte */
PDEBUG(D_USBI, "i2c r [%02x] -> %04x (%02x)",
@@ -6323,8 +5912,10 @@
reg_w_i(gspca_dev->dev, valL, 0x93);
reg_w_i(gspca_dev->dev, valH, 0x94);
reg_w_i(gspca_dev->dev, 0x01, 0x90); /* <- write command */
- msleep(15);
+ msleep(1);
retbyte = reg_r_i(gspca_dev, 0x0091); /* read status */
+ if (retbyte != 0x00)
+ err("i2c_w status error %02x", retbyte);
PDEBUG(D_USBO, "i2c w [%02x] = %02x%02x (%02x)",
reg, valH, valL, retbyte);
return retbyte;
@@ -6359,7 +5950,7 @@
break;
}
action++;
-/* msleep(1); */
+ msleep(1);
}
}
@@ -6380,11 +5971,13 @@
{0x4c, 0xf5, 0xff, 0xf9, 0x51, 0xf5, 0xfb, 0xed, 0x5f};
static const __u8 po2030_matrix[9] =
{0x60, 0xf0, 0xf0, 0xf0, 0x60, 0xf0, 0xf0, 0xf0, 0x60};
+ static const u8 tas5130c_matrix[9] =
+ {0x68, 0xec, 0xec, 0xec, 0x68, 0xec, 0xec, 0xec, 0x68};
static const __u8 vf0250_matrix[9] =
{0x7b, 0xea, 0xea, 0xea, 0x7b, 0xea, 0xea, 0xea, 0x7b};
static const __u8 *matrix_tb[SENSOR_MAX] = {
adcm2700_matrix, /* SENSOR_ADCM2700 0 */
- NULL, /* SENSOR_CS2102 1 */
+ ov7620_matrix, /* SENSOR_CS2102 1 */
NULL, /* SENSOR_CS2102K 2 */
gc0305_matrix, /* SENSOR_GC0305 3 */
NULL, /* SENSOR_HDCS2020b 4 */
@@ -6392,15 +5985,16 @@
NULL, /* SENSOR_HV7131C 6 */
NULL, /* SENSOR_ICM105A 7 */
NULL, /* SENSOR_MC501CB 8 */
- ov7620_matrix, /* SENSOR_OV7620 9 */
- NULL, /* SENSOR_OV7630C 10 */
- NULL, /* SENSOR_PAS106 11 */
- pas202b_matrix, /* SENSOR_PAS202B 12 */
- NULL, /* SENSOR_PB0330 13 */
- po2030_matrix, /* SENSOR_PO2030 14 */
- NULL, /* SENSOR_TAS5130CK 15 */
- NULL, /* SENSOR_TAS5130CXX 16 */
- vf0250_matrix, /* SENSOR_TAS5130C_VF0250 17 */
+ gc0305_matrix, /* SENSOR_MI0360SOC 9 */
+ ov7620_matrix, /* SENSOR_OV7620 10 */
+ NULL, /* SENSOR_OV7630C 11 */
+ NULL, /* SENSOR_PAS106 12 */
+ pas202b_matrix, /* SENSOR_PAS202B 13 */
+ gc0305_matrix, /* SENSOR_PB0330 14 */
+ po2030_matrix, /* SENSOR_PO2030 15 */
+ NULL, /* SENSOR_TAS5130CK 16 */
+ tas5130c_matrix, /* SENSOR_TAS5130CXX 17 */
+ vf0250_matrix, /* SENSOR_TAS5130C_VF0250 18 */
};
matrix = matrix_tb[sd->sensor];
@@ -6640,39 +6234,43 @@
{MC501CB_NoFliker, MC501CB_NoFlikerScale,
MC501CB_50HZ, MC501CB_50HZScale,
MC501CB_60HZ, MC501CB_60HZScale},
-/* SENSOR_OV7620 9 */
+/* SENSOR_MI0360SOC 9 */
+ {mi360soc_AENoFlikerScale, mi360soc_AENoFliker,
+ mi360soc_AE50HZScale, mi360soc_AE50HZ,
+ mi360soc_AE60HZScale, mi360soc_AE60HZ},
+/* SENSOR_OV7620 10 */
{OV7620_NoFliker, OV7620_NoFliker,
OV7620_50HZ, OV7620_50HZ,
OV7620_60HZ, OV7620_60HZ},
-/* SENSOR_OV7630C 10 */
+/* SENSOR_OV7630C 11 */
{NULL, NULL,
NULL, NULL,
NULL, NULL},
-/* SENSOR_PAS106 11 */
+/* SENSOR_PAS106 12 */
{pas106b_NoFliker, pas106b_NoFliker,
pas106b_50HZ, pas106b_50HZ,
pas106b_60HZ, pas106b_60HZ},
-/* SENSOR_PAS202B 12 */
+/* SENSOR_PAS202B 13 */
{pas202b_NoFlikerScale, pas202b_NoFliker,
pas202b_50HZScale, pas202b_50HZ,
pas202b_60HZScale, pas202b_60HZ},
-/* SENSOR_PB0330 13 */
- {pb0330_NoFliker, pb0330_NoFlikerScale,
- pb0330_50HZ, pb0330_50HZScale,
- pb0330_60HZ, pb0330_60HZScale},
-/* SENSOR_PO2030 14 */
+/* SENSOR_PB0330 14 */
+ {pb0330_NoFlikerScale, pb0330_NoFliker,
+ pb0330_50HZScale, pb0330_50HZ,
+ pb0330_60HZScale, pb0330_60HZ},
+/* SENSOR_PO2030 15 */
{PO2030_NoFliker, PO2030_NoFliker,
PO2030_50HZ, PO2030_50HZ,
PO2030_60HZ, PO2030_60HZ},
-/* SENSOR_TAS5130CK 15 */
- {tas5130cxx_NoFliker, tas5130cxx_NoFlikerScale,
- tas5130cxx_50HZ, tas5130cxx_50HZScale,
- tas5130cxx_60HZ, tas5130cxx_60HZScale},
-/* SENSOR_TAS5130CXX 16 */
- {tas5130cxx_NoFliker, tas5130cxx_NoFlikerScale,
- tas5130cxx_50HZ, tas5130cxx_50HZScale,
- tas5130cxx_60HZ, tas5130cxx_60HZScale},
-/* SENSOR_TAS5130C_VF0250 17 */
+/* SENSOR_TAS5130CK 16 */
+ {tas5130cxx_NoFlikerScale, tas5130cxx_NoFliker,
+ tas5130cxx_50HZScale, tas5130cxx_50HZ,
+ tas5130cxx_60HZScale, tas5130cxx_60HZ},
+/* SENSOR_TAS5130CXX 17 */
+ {tas5130cxx_NoFlikerScale, tas5130cxx_NoFliker,
+ tas5130cxx_50HZScale, tas5130cxx_50HZ,
+ tas5130cxx_60HZScale, tas5130cxx_60HZ},
+/* SENSOR_TAS5130C_VF0250 18 */
{tas5130c_vf0250_NoFliker, tas5130c_vf0250_NoFlikerScale,
tas5130c_vf0250_50HZ, tas5130c_vf0250_50HZScale,
tas5130c_vf0250_60HZ, tas5130c_vf0250_60HZScale},
@@ -6729,6 +6327,7 @@
case SENSOR_ADCM2700:
case SENSOR_GC0305:
case SENSOR_OV7620:
+ case SENSOR_MI0360SOC:
case SENSOR_PB0330:
case SENSOR_PO2030:
reg_w(dev, 0x0d, 0x003a);
@@ -6820,7 +6419,7 @@
start_2wr_probe(dev, 0x0e); /* PAS202BCB */
reg_w(dev, 0x08, 0x008d);
i2c_write(gspca_dev, 0x03, 0xaa, 0x00);
- msleep(500);
+ msleep(50);
retword = i2c_read(gspca_dev, 0x03);
if (retword != 0)
return 0x0e; /* PAS202BCB */
@@ -6863,7 +6462,8 @@
__u8 internal_sensor_id;
};
static const struct sensor_by_chipset_revision chipset_revision_sensor[] = {
- {0xc001, 0x13}, /* MI0360 */
+ {0xc000, 0x12}, /* TAS5130C */
+ {0xc001, 0x13}, /* MI0360SOC */
{0xe001, 0x13},
{0x8001, 0x13},
{0x8000, 0x14}, /* CS2102K */
@@ -6963,7 +6563,6 @@
reg_w(dev, 0x01, 0x0001);
reg_w(dev, 0xee, 0x008b);
reg_w(dev, 0x03, 0x0012);
-/* msleep(150); */
reg_w(dev, 0x01, 0x0012);
reg_w(dev, 0x05, 0x0012);
retword = i2c_read(gspca_dev, 0x00) << 8; /* ID 0 */
@@ -7025,7 +6624,7 @@
int vga = 1; /* 1: vga, 0: sif */
static const __u8 gamma[SENSOR_MAX] = {
4, /* SENSOR_ADCM2700 0 */
- 5, /* SENSOR_CS2102 1 */
+ 4, /* SENSOR_CS2102 1 */
5, /* SENSOR_CS2102K 2 */
4, /* SENSOR_GC0305 3 */
4, /* SENSOR_HDCS2020b 4 */
@@ -7033,15 +6632,16 @@
4, /* SENSOR_HV7131C 6 */
4, /* SENSOR_ICM105A 7 */
4, /* SENSOR_MC501CB 8 */
- 3, /* SENSOR_OV7620 9 */
- 4, /* SENSOR_OV7630C 10 */
- 4, /* SENSOR_PAS106 11 */
- 4, /* SENSOR_PAS202B 12 */
- 4, /* SENSOR_PB0330 13 */
- 4, /* SENSOR_PO2030 14 */
- 4, /* SENSOR_TAS5130CK 15 */
- 4, /* SENSOR_TAS5130CXX 16 */
- 3, /* SENSOR_TAS5130C_VF0250 17 */
+ 4, /* SENSOR_MI0360SOC 9 */
+ 3, /* SENSOR_OV7620 10 */
+ 4, /* SENSOR_OV7630C 11 */
+ 4, /* SENSOR_PAS106 12 */
+ 4, /* SENSOR_PAS202B 13 */
+ 4, /* SENSOR_PB0330 14 */
+ 4, /* SENSOR_PO2030 15 */
+ 4, /* SENSOR_TAS5130CK 16 */
+ 3, /* SENSOR_TAS5130CXX 17 */
+ 3, /* SENSOR_TAS5130C_VF0250 18 */
};
/* define some sensors from the vendor/product */
@@ -7065,7 +6665,7 @@
break;
default:
PDEBUG(D_PROBE,
- "Sensor UNKNOW_0 force Tas5130");
+ "Sensor UNKNOWN_0 force Tas5130");
sd->sensor = SENSOR_TAS5130CXX;
}
break;
@@ -7103,7 +6703,7 @@
break;
case 0x10:
case 0x12:
- PDEBUG(D_PROBE, "Find Sensor TAS5130");
+ PDEBUG(D_PROBE, "Find Sensor TAS5130C");
sd->sensor = SENSOR_TAS5130CXX;
break;
case 0x11:
@@ -7112,9 +6712,9 @@
break;
case 0x13:
PDEBUG(D_PROBE,
- "Find Sensor MI0360. Chip revision %x",
+ "Find Sensor MI0360SOC. Chip revision %x",
sd->chip_revision);
- sd->sensor = SENSOR_PB0330;
+ sd->sensor = SENSOR_MI0360SOC;
break;
case 0x14:
PDEBUG(D_PROBE,
@@ -7228,17 +6828,17 @@
{hv7131cxx_InitialScale, hv7131cxx_Initial}, /* 6 */
{icm105axx_InitialScale, icm105axx_Initial}, /* 7 */
{MC501CB_InitialScale, MC501CB_Initial}, /* 8 */
- {OV7620_mode0, OV7620_mode1}, /* 9 */
- {ov7630c_InitialScale, ov7630c_Initial}, /* 10 */
- {pas106b_InitialScale, pas106b_Initial}, /* 11 */
- {pas202b_Initial, pas202b_InitialScale}, /* 12 */
- {pb0330xx_InitialScale, pb0330xx_Initial}, /* 13 */
-/* or {pb03303x_InitialScale, pb03303x_Initial}, */
- {PO2030_mode0, PO2030_mode1}, /* 14 */
- {tas5130CK_InitialScale, tas5130CK_Initial}, /* 15 */
- {tas5130cxx_InitialScale, tas5130cxx_Initial}, /* 16 */
+ {mi0360soc_Initial, mi0360soc_InitialScale}, /* 9 */
+ {OV7620_mode0, OV7620_mode1}, /* 10 */
+ {ov7630c_InitialScale, ov7630c_Initial}, /* 11 */
+ {pas106b_InitialScale, pas106b_Initial}, /* 12 */
+ {pas202b_Initial, pas202b_InitialScale}, /* 13 */
+ {pb0330_Initial, pb0330_InitialScale}, /* 14 */
+ {PO2030_mode0, PO2030_mode1}, /* 15 */
+ {tas5130CK_InitialScale, tas5130CK_Initial}, /* 16 */
+ {tas5130cxx_Initial, tas5130cxx_InitialScale}, /* 17 */
{tas5130c_vf0250_InitialScale, tas5130c_vf0250_Initial},
- /* 17 */
+ /* 18 */
};
/* create the JPEG header */
@@ -7258,19 +6858,6 @@
case SENSOR_PAS106:
usb_exchange(gspca_dev, pas106b_Initial_com);
break;
- case SENSOR_PB0330:
- if (mode) {
- if (sd->chip_revision == 0xc001
- || sd->chip_revision == 0xe001
- || sd->chip_revision == 0x8001)
- zc3_init = pb03303x_Initial;
- } else {
- if (sd->chip_revision == 0xc001
- || sd->chip_revision == 0xe001
- || sd->chip_revision == 0x8001)
- zc3_init = pb03303x_InitialScale;
- }
- break;
}
usb_exchange(gspca_dev, zc3_init);
@@ -7310,10 +6897,8 @@
/* set the gamma tables when not set */
switch (sd->sensor) {
- case SENSOR_CS2102: /* gamma set in xxx_Initial */
- case SENSOR_CS2102K:
+ case SENSOR_CS2102K: /* gamma set in xxx_Initial */
case SENSOR_HDCS2020b:
- case SENSOR_PB0330: /* pb with chip_revision - see above */
case SENSOR_OV7630C:
case SENSOR_TAS5130CK:
break;
@@ -7365,7 +6950,7 @@
setautogain(gspca_dev);
switch (sd->sensor) {
case SENSOR_PO2030:
- msleep(500);
+ msleep(50);
reg_r(gspca_dev, 0x0008);
reg_r(gspca_dev, 0x0007);
/*fall thru*/
@@ -7389,17 +6974,16 @@
}
static void sd_pkt_scan(struct gspca_dev *gspca_dev,
- struct gspca_frame *frame,
- __u8 *data,
+ u8 *data,
int len)
{
struct sd *sd = (struct sd *) gspca_dev;
if (data[0] == 0xff && data[1] == 0xd8) { /* start of frame */
- frame = gspca_frame_add(gspca_dev, LAST_PACKET, frame,
- data, 0);
+ gspca_frame_add(gspca_dev, LAST_PACKET,
+ NULL, 0);
/* put the JPEG header in the new frame */
- gspca_frame_add(gspca_dev, FIRST_PACKET, frame,
+ gspca_frame_add(gspca_dev, FIRST_PACKET,
sd->jpeg_hdr, JPEG_HDR_SZ);
/* remove the webcam's header:
@@ -7411,7 +6995,7 @@
data += 18;
len -= 18;
}
- gspca_frame_add(gspca_dev, INTER_PACKET, frame, data, len);
+ gspca_frame_add(gspca_dev, INTER_PACKET, data, len);
}
static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val)
diff --git a/drivers/media/video/hdpvr/hdpvr-video.c b/drivers/media/video/hdpvr/hdpvr-video.c
index 2eb9dc2..b5439ca 100644
--- a/drivers/media/video/hdpvr/hdpvr-video.c
+++ b/drivers/media/video/hdpvr/hdpvr-video.c
@@ -139,7 +139,7 @@
urb = usb_alloc_urb(0, GFP_KERNEL);
if (!urb) {
v4l2_err(&dev->v4l2_dev, "cannot allocate urb\n");
- goto exit;
+ goto exit_urb;
}
buf->urb = urb;
@@ -148,7 +148,7 @@
if (!mem) {
v4l2_err(&dev->v4l2_dev,
"cannot allocate usb transfer buffer\n");
- goto exit;
+ goto exit_urb_buffer;
}
usb_fill_bulk_urb(buf->urb, dev->udev,
@@ -161,6 +161,10 @@
list_add_tail(&buf->buff_list, &dev->free_buff_list);
}
return 0;
+exit_urb_buffer:
+ usb_free_urb(urb);
+exit_urb:
+ kfree(buf);
exit:
hdpvr_free_buffers(dev);
return retval;
diff --git a/drivers/media/video/hexium_gemini.c b/drivers/media/video/hexium_gemini.c
index 71c2114..60d992e 100644
--- a/drivers/media/video/hexium_gemini.c
+++ b/drivers/media/video/hexium_gemini.c
@@ -251,7 +251,7 @@
DEB_EE(("VIDIOC_S_INPUT %d.\n", input));
- if (input < 0 || input >= HEXIUM_INPUTS)
+ if (input >= HEXIUM_INPUTS)
return -EINVAL;
hexium->cur_input = input;
diff --git a/drivers/media/video/hexium_orion.c b/drivers/media/video/hexium_orion.c
index 39d65ca..938a1f8 100644
--- a/drivers/media/video/hexium_orion.c
+++ b/drivers/media/video/hexium_orion.c
@@ -350,7 +350,7 @@
struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
struct hexium *hexium = (struct hexium *) dev->ext_priv;
- if (input < 0 || input >= HEXIUM_INPUTS)
+ if (input >= HEXIUM_INPUTS)
return -EINVAL;
hexium->cur_input = input;
diff --git a/drivers/media/video/ir-kbd-i2c.c b/drivers/media/video/ir-kbd-i2c.c
index 247d311..64360d2 100644
--- a/drivers/media/video/ir-kbd-i2c.c
+++ b/drivers/media/video/ir-kbd-i2c.c
@@ -275,7 +275,7 @@
if (0 == rc) {
ir_input_nokey(ir->input, &ir->ir);
} else {
- ir_input_keydown(ir->input, &ir->ir, ir_key, ir_raw);
+ ir_input_keydown(ir->input, &ir->ir, ir_key);
}
}
@@ -299,7 +299,7 @@
{
struct ir_scancode_table *ir_codes = NULL;
const char *name = NULL;
- int ir_type;
+ int ir_type = 0;
struct IR_i2c *ir;
struct input_dev *input_dev;
struct i2c_adapter *adap = client->adapter;
@@ -353,10 +353,8 @@
ir_type = IR_TYPE_RC5;
ir_codes = &ir_codes_fusionhdtv_mce_table;
break;
- case 0x7a:
case 0x47:
case 0x71:
- case 0x2d:
if (adap->id == I2C_HW_B_CX2388x ||
adap->id == I2C_HW_B_CX2341X) {
/* Handled by cx88-input */
@@ -381,10 +379,6 @@
ir_type = IR_TYPE_OTHER;
ir_codes = &ir_codes_avermedia_cardbus_table;
break;
- default:
- dprintk(1, DEVNAME ": Unsupported i2c address 0x%02x\n", addr);
- err = -ENODEV;
- goto err_out_free;
}
/* Let the caller override settings */
@@ -427,7 +421,7 @@
}
/* Make sure we are all setup before going on */
- if (!name || !ir->get_key || !ir_codes) {
+ if (!name || !ir->get_key || !ir_type || !ir_codes) {
dprintk(1, DEVNAME ": Unsupported device at address 0x%02x\n",
addr);
err = -ENODEV;
@@ -443,7 +437,10 @@
dev_name(&client->dev));
/* init + register input device */
- ir_input_init(input_dev, &ir->ir, ir_type, ir->ir_codes);
+ err = ir_input_init(input_dev, &ir->ir, ir_type, ir->ir_codes);
+ if (err < 0)
+ goto err_out_free;
+
input_dev->id.bustype = BUS_I2C;
input_dev->name = ir->name;
input_dev->phys = ir->phys;
@@ -462,6 +459,7 @@
return 0;
err_out_free:
+ ir_input_free(input_dev);
input_free_device(input_dev);
kfree(ir);
return err;
@@ -475,6 +473,7 @@
cancel_delayed_work_sync(&ir->work);
/* unregister device */
+ ir_input_free(ir->input);
input_unregister_device(ir->input);
/* free memory */
diff --git a/drivers/media/video/ivtv/ivtv-cards.c b/drivers/media/video/ivtv/ivtv-cards.c
index 4873b6c..79d0fe4 100644
--- a/drivers/media/video/ivtv/ivtv-cards.c
+++ b/drivers/media/video/ivtv/ivtv-cards.c
@@ -136,7 +136,8 @@
.hw_audio = IVTV_HW_MSP34XX,
.hw_audio_ctrl = IVTV_HW_MSP34XX,
.hw_all = IVTV_HW_MSP34XX | IVTV_HW_SAA7115 |
- IVTV_HW_SAA7127 | IVTV_HW_TVEEPROM | IVTV_HW_TUNER,
+ IVTV_HW_SAA7127 | IVTV_HW_TVEEPROM | IVTV_HW_TUNER |
+ IVTV_HW_I2C_IR_RX_HAUP_EXT | IVTV_HW_I2C_IR_RX_HAUP_INT,
.video_inputs = {
{ IVTV_CARD_INPUT_VID_TUNER, 0, IVTV_SAA71XX_COMPOSITE4 },
{ IVTV_CARD_INPUT_SVIDEO1, 1, IVTV_SAA71XX_SVIDEO0 },
@@ -199,7 +200,9 @@
.hw_audio_ctrl = IVTV_HW_CX25840,
.hw_muxer = IVTV_HW_WM8775,
.hw_all = IVTV_HW_WM8775 | IVTV_HW_CX25840 |
- IVTV_HW_TVEEPROM | IVTV_HW_TUNER,
+ IVTV_HW_TVEEPROM | IVTV_HW_TUNER |
+ IVTV_HW_I2C_IR_RX_HAUP_EXT | IVTV_HW_I2C_IR_RX_HAUP_INT |
+ IVTV_HW_Z8F0811_IR_HAUP,
.video_inputs = {
{ IVTV_CARD_INPUT_VID_TUNER, 0, CX25840_COMPOSITE7 },
{ IVTV_CARD_INPUT_SVIDEO1, 1, CX25840_SVIDEO1 },
@@ -955,7 +958,8 @@
.hw_video = IVTV_HW_CX25840,
.hw_audio = IVTV_HW_CX25840,
.hw_audio_ctrl = IVTV_HW_CX25840,
- .hw_all = IVTV_HW_CX25840 | IVTV_HW_TUNER | IVTV_HW_WM8739,
+ .hw_all = IVTV_HW_CX25840 | IVTV_HW_TUNER | IVTV_HW_WM8739 |
+ IVTV_HW_I2C_IR_RX_AVER,
.video_inputs = {
{ IVTV_CARD_INPUT_VID_TUNER, 0, CX25840_COMPOSITE2 },
{ IVTV_CARD_INPUT_SVIDEO1, 1, CX25840_SVIDEO3 },
@@ -965,6 +969,7 @@
{ IVTV_CARD_INPUT_AUD_TUNER, CX25840_AUDIO5 },
{ IVTV_CARD_INPUT_LINE_IN1, CX25840_AUDIO_SERIAL, 1 },
},
+ .radio_input = { IVTV_CARD_INPUT_AUD_TUNER, CX25840_AUDIO5 },
/* enable line-in */
.gpio_init = { .direction = 0xe000, .initial_value = 0x4000 },
.xceive_pin = 10,
@@ -1025,13 +1030,15 @@
/* AVerMedia UltraTV 1500 MCE (newer non-cx88 version, M113 variant) card */
static const struct ivtv_card_pci_info ivtv_pci_aver_ultra1500mce[] = {
- { PCI_DEVICE_ID_IVTV16, IVTV_PCI_ID_AVERMEDIA, 0xc019 },
+ { PCI_DEVICE_ID_IVTV16, IVTV_PCI_ID_AVERMEDIA, 0xc019 }, /* NTSC */
+ { PCI_DEVICE_ID_IVTV16, IVTV_PCI_ID_AVERMEDIA, 0xc01b }, /* PAL/SECAM */
{ 0, 0, 0 }
};
static const struct ivtv_card ivtv_card_aver_ultra1500mce = {
.type = IVTV_CARD_AVER_ULTRA1500MCE,
.name = "AVerMedia UltraTV 1500 MCE / AVerTV M113 Philips Tuner",
+ .comment = "For non-NTSC tuners, use the pal= or secam= module options",
.v4l2_capabilities = IVTV_CAP_ENCODER,
.hw_video = IVTV_HW_CX25840,
.hw_audio = IVTV_HW_CX25840,
@@ -1058,6 +1065,7 @@
.tuners = {
/* The UltraTV 1500 MCE has a Philips FM1236 MK5 TV/FM tuner */
{ .std = V4L2_STD_MN, .tuner = TUNER_PHILIPS_FM1236_MK3 },
+ { .std = V4L2_STD_PAL_SECAM, .tuner = TUNER_PHILIPS_FM1216MK5 },
},
.pci_list = ivtv_pci_aver_ultra1500mce,
.i2c = &ivtv_i2c_std,
diff --git a/drivers/media/video/ivtv/ivtv-cards.h b/drivers/media/video/ivtv/ivtv-cards.h
index e99a0a2..6148827 100644
--- a/drivers/media/video/ivtv/ivtv-cards.h
+++ b/drivers/media/video/ivtv/ivtv-cards.h
@@ -87,26 +87,43 @@
#define IVTV_PCI_ID_GOTVIEW1 0xffac
#define IVTV_PCI_ID_GOTVIEW2 0xffad
-/* hardware flags, no gaps allowed, IVTV_HW_GPIO must always be last */
-#define IVTV_HW_CX25840 (1 << 0)
-#define IVTV_HW_SAA7115 (1 << 1)
-#define IVTV_HW_SAA7127 (1 << 2)
-#define IVTV_HW_MSP34XX (1 << 3)
-#define IVTV_HW_TUNER (1 << 4)
-#define IVTV_HW_WM8775 (1 << 5)
-#define IVTV_HW_CS53L32A (1 << 6)
-#define IVTV_HW_TVEEPROM (1 << 7)
-#define IVTV_HW_SAA7114 (1 << 8)
-#define IVTV_HW_UPD64031A (1 << 9)
-#define IVTV_HW_UPD6408X (1 << 10)
-#define IVTV_HW_SAA717X (1 << 11)
-#define IVTV_HW_WM8739 (1 << 12)
-#define IVTV_HW_VP27SMPX (1 << 13)
-#define IVTV_HW_M52790 (1 << 14)
-#define IVTV_HW_GPIO (1 << 15)
+/* hardware flags, no gaps allowed */
+#define IVTV_HW_CX25840 (1 << 0)
+#define IVTV_HW_SAA7115 (1 << 1)
+#define IVTV_HW_SAA7127 (1 << 2)
+#define IVTV_HW_MSP34XX (1 << 3)
+#define IVTV_HW_TUNER (1 << 4)
+#define IVTV_HW_WM8775 (1 << 5)
+#define IVTV_HW_CS53L32A (1 << 6)
+#define IVTV_HW_TVEEPROM (1 << 7)
+#define IVTV_HW_SAA7114 (1 << 8)
+#define IVTV_HW_UPD64031A (1 << 9)
+#define IVTV_HW_UPD6408X (1 << 10)
+#define IVTV_HW_SAA717X (1 << 11)
+#define IVTV_HW_WM8739 (1 << 12)
+#define IVTV_HW_VP27SMPX (1 << 13)
+#define IVTV_HW_M52790 (1 << 14)
+#define IVTV_HW_GPIO (1 << 15)
+#define IVTV_HW_I2C_IR_RX_AVER (1 << 16)
+#define IVTV_HW_I2C_IR_RX_HAUP_EXT (1 << 17) /* External before internal */
+#define IVTV_HW_I2C_IR_RX_HAUP_INT (1 << 18)
+#define IVTV_HW_Z8F0811_IR_TX_HAUP (1 << 19)
+#define IVTV_HW_Z8F0811_IR_RX_HAUP (1 << 20)
+
+#define IVTV_HW_Z8F0811_IR_HAUP (IVTV_HW_Z8F0811_IR_RX_HAUP | \
+ IVTV_HW_Z8F0811_IR_TX_HAUP)
#define IVTV_HW_SAA711X (IVTV_HW_SAA7115 | IVTV_HW_SAA7114)
+#define IVTV_HW_IR_RX_ANY (IVTV_HW_I2C_IR_RX_AVER | \
+ IVTV_HW_I2C_IR_RX_HAUP_EXT | \
+ IVTV_HW_I2C_IR_RX_HAUP_INT | \
+ IVTV_HW_Z8F0811_IR_RX_HAUP)
+
+#define IVTV_HW_IR_TX_ANY (IVTV_HW_Z8F0811_IR_TX_HAUP)
+
+#define IVTV_HW_IR_ANY (IVTV_HW_IR_RX_ANY | IVTV_HW_IR_TX_ANY)
+
/* video inputs */
#define IVTV_CARD_INPUT_VID_TUNER 1
#define IVTV_CARD_INPUT_SVIDEO1 2
diff --git a/drivers/media/video/ivtv/ivtv-driver.c b/drivers/media/video/ivtv/ivtv-driver.c
index 463ec34..347c334 100644
--- a/drivers/media/video/ivtv/ivtv-driver.c
+++ b/drivers/media/video/ivtv/ivtv-driver.c
@@ -91,10 +91,15 @@
-1, -1, -1, -1, -1, -1, -1, -1,
-1, -1, -1, -1, -1, -1, -1, -1,
-1, -1, -1, -1, -1, -1, -1, -1 };
+static int i2c_clock_period[IVTV_MAX_CARDS] = { -1, -1, -1, -1, -1, -1, -1, -1,
+ -1, -1, -1, -1, -1, -1, -1, -1,
+ -1, -1, -1, -1, -1, -1, -1, -1,
+ -1, -1, -1, -1, -1, -1, -1, -1 };
static unsigned int cardtype_c = 1;
static unsigned int tuner_c = 1;
static unsigned int radio_c = 1;
+static unsigned int i2c_clock_period_c = 1;
static char pal[] = "---";
static char secam[] = "--";
static char ntsc[] = "-";
@@ -151,6 +156,7 @@
module_param(tunertype, int, 0644);
module_param(newi2c, int, 0644);
+module_param_array(i2c_clock_period, int, &i2c_clock_period_c, 0644);
MODULE_PARM_DESC(tuner, "Tuner type selection,\n"
"\t\t\tsee tuner.h for values");
@@ -245,6 +251,10 @@
"Use new I2C implementation\n"
"\t\t\t-1 is autodetect, 0 is off, 1 is on\n"
"\t\t\tDefault is autodetect");
+MODULE_PARM_DESC(i2c_clock_period,
+ "Period of SCL for the I2C bus controlled by the CX23415/6\n"
+ "\t\t\tMin: 10 usec (100 kHz), Max: 4500 usec (222 Hz)\n"
+ "\t\t\tDefault: " __stringify(IVTV_DEFAULT_I2C_CLOCK_PERIOD));
MODULE_PARM_DESC(ivtv_first_minor, "Set device node number assigned to first card");
@@ -600,6 +610,15 @@
itv->options.cardtype = cardtype[itv->instance];
itv->options.tuner = tuner[itv->instance];
itv->options.radio = radio[itv->instance];
+
+ itv->options.i2c_clock_period = i2c_clock_period[itv->instance];
+ if (itv->options.i2c_clock_period == -1)
+ itv->options.i2c_clock_period = IVTV_DEFAULT_I2C_CLOCK_PERIOD;
+ else if (itv->options.i2c_clock_period < 10)
+ itv->options.i2c_clock_period = 10;
+ else if (itv->options.i2c_clock_period > 4500)
+ itv->options.i2c_clock_period = 4500;
+
itv->options.newi2c = newi2c;
if (tunertype < -1 || tunertype > 1) {
IVTV_WARN("Invalid tunertype argument, will autodetect instead\n");
@@ -865,6 +884,10 @@
itv->hw_flags |= device;
}
+ /* probe for legacy IR controllers that aren't in card definitions */
+ if ((itv->hw_flags & IVTV_HW_IR_ANY) == 0)
+ ivtv_i2c_new_ir_legacy(itv);
+
if (itv->card->hw_all & IVTV_HW_CX25840)
itv->sd_video = ivtv_find_hw(itv, IVTV_HW_CX25840);
else if (itv->card->hw_all & IVTV_HW_SAA717X)
@@ -1361,7 +1384,7 @@
.remove = ivtv_remove,
};
-static int module_start(void)
+static int __init module_start(void)
{
printk(KERN_INFO "ivtv: Start initialization, version %s\n", IVTV_VERSION);
@@ -1385,7 +1408,7 @@
return 0;
}
-static void module_cleanup(void)
+static void __exit module_cleanup(void)
{
pci_unregister_driver(&ivtv_pci_driver);
}
diff --git a/drivers/media/video/ivtv/ivtv-driver.h b/drivers/media/video/ivtv/ivtv-driver.h
index 440f732..e4816da 100644
--- a/drivers/media/video/ivtv/ivtv-driver.h
+++ b/drivers/media/video/ivtv/ivtv-driver.h
@@ -64,6 +64,7 @@
#include <media/v4l2-device.h>
#include <media/tuner.h>
#include <media/cx2341x.h>
+#include <media/ir-kbd-i2c.h>
#include <linux/ivtv.h>
@@ -176,12 +177,16 @@
#define IVTV_MAX_PGM_INDEX (400)
+/* Default I2C SCL period in microseconds */
+#define IVTV_DEFAULT_I2C_CLOCK_PERIOD 20
+
struct ivtv_options {
int kilobytes[IVTV_MAX_STREAMS]; /* size in kilobytes of each stream */
int cardtype; /* force card type on load */
int tuner; /* set tuner on load */
int radio; /* enable/disable radio */
int newi2c; /* new I2C algorithm */
+ int i2c_clock_period; /* period of SCL for I2C bus */
};
/* ivtv-specific mailbox template */
@@ -677,6 +682,7 @@
int i2c_state; /* i2c bit state */
struct mutex i2c_bus_lock; /* lock i2c bus */
+ struct IR_i2c_init_data ir_i2c_init_data;
/* Program Index information */
u32 pgm_info_offset; /* start of pgm info in encoder memory */
diff --git a/drivers/media/video/ivtv/ivtv-i2c.c b/drivers/media/video/ivtv/ivtv-i2c.c
index b9c71e6..2ee03c2 100644
--- a/drivers/media/video/ivtv/ivtv-i2c.c
+++ b/drivers/media/video/ivtv/ivtv-i2c.c
@@ -88,6 +88,11 @@
#define IVTV_UPD64083_I2C_ADDR 0x5c
#define IVTV_VP27SMPX_I2C_ADDR 0x5b
#define IVTV_M52790_I2C_ADDR 0x48
+#define IVTV_AVERMEDIA_IR_RX_I2C_ADDR 0x40
+#define IVTV_HAUP_EXT_IR_RX_I2C_ADDR 0x1a
+#define IVTV_HAUP_INT_IR_RX_I2C_ADDR 0x18
+#define IVTV_Z8F0811_IR_TX_I2C_ADDR 0x70
+#define IVTV_Z8F0811_IR_RX_I2C_ADDR 0x71
/* This array should match the IVTV_HW_ defines */
static const u8 hw_addrs[] = {
@@ -106,7 +111,12 @@
IVTV_WM8739_I2C_ADDR,
IVTV_VP27SMPX_I2C_ADDR,
IVTV_M52790_I2C_ADDR,
- 0 /* IVTV_HW_GPIO dummy driver ID */
+ 0, /* IVTV_HW_GPIO dummy driver ID */
+ IVTV_AVERMEDIA_IR_RX_I2C_ADDR, /* IVTV_HW_I2C_IR_RX_AVER */
+ IVTV_HAUP_EXT_IR_RX_I2C_ADDR, /* IVTV_HW_I2C_IR_RX_HAUP_EXT */
+ IVTV_HAUP_INT_IR_RX_I2C_ADDR, /* IVTV_HW_I2C_IR_RX_HAUP_INT */
+ IVTV_Z8F0811_IR_TX_I2C_ADDR, /* IVTV_HW_Z8F0811_IR_TX_HAUP */
+ IVTV_Z8F0811_IR_RX_I2C_ADDR, /* IVTV_HW_Z8F0811_IR_RX_HAUP */
};
/* This array should match the IVTV_HW_ defines */
@@ -126,7 +136,12 @@
"wm8739",
"vp27smpx",
"m52790",
- NULL
+ NULL,
+ NULL, /* IVTV_HW_I2C_IR_RX_AVER */
+ NULL, /* IVTV_HW_I2C_IR_RX_HAUP_EXT */
+ NULL, /* IVTV_HW_I2C_IR_RX_HAUP_INT */
+ NULL, /* IVTV_HW_Z8F0811_IR_TX_HAUP */
+ NULL, /* IVTV_HW_Z8F0811_IR_RX_HAUP */
};
/* This array should match the IVTV_HW_ defines */
@@ -147,8 +162,95 @@
"vp27smpx",
"m52790",
"gpio",
+ "ir_video", /* IVTV_HW_I2C_IR_RX_AVER */
+ "ir_video", /* IVTV_HW_I2C_IR_RX_HAUP_EXT */
+ "ir_video", /* IVTV_HW_I2C_IR_RX_HAUP_INT */
+ "ir_tx_z8f0811_haup", /* IVTV_HW_Z8F0811_IR_TX_HAUP */
+ "ir_rx_z8f0811_haup", /* IVTV_HW_Z8F0811_IR_RX_HAUP */
};
+static int ivtv_i2c_new_ir(struct ivtv *itv, u32 hw, const char *type, u8 addr)
+{
+ struct i2c_board_info info;
+ struct i2c_adapter *adap = &itv->i2c_adap;
+ struct IR_i2c_init_data *init_data = &itv->ir_i2c_init_data;
+ unsigned short addr_list[2] = { addr, I2C_CLIENT_END };
+
+ /* Only allow one IR transmitter to be registered per board */
+ if (hw & IVTV_HW_IR_TX_ANY) {
+ if (itv->hw_flags & IVTV_HW_IR_TX_ANY)
+ return -1;
+ memset(&info, 0, sizeof(struct i2c_board_info));
+ strlcpy(info.type, type, I2C_NAME_SIZE);
+ return i2c_new_probed_device(adap, &info, addr_list) == NULL
+ ? -1 : 0;
+ }
+
+ /* Only allow one IR receiver to be registered per board */
+ if (itv->hw_flags & IVTV_HW_IR_RX_ANY)
+ return -1;
+
+ /* Our default information for ir-kbd-i2c.c to use */
+ switch (hw) {
+ case IVTV_HW_I2C_IR_RX_AVER:
+ init_data->ir_codes = &ir_codes_avermedia_cardbus_table;
+ init_data->internal_get_key_func =
+ IR_KBD_GET_KEY_AVERMEDIA_CARDBUS;
+ init_data->type = IR_TYPE_OTHER;
+ init_data->name = "AVerMedia AVerTV card";
+ break;
+ case IVTV_HW_I2C_IR_RX_HAUP_EXT:
+ case IVTV_HW_I2C_IR_RX_HAUP_INT:
+ /* Default to old black remote */
+ init_data->ir_codes = &ir_codes_rc5_tv_table;
+ init_data->internal_get_key_func = IR_KBD_GET_KEY_HAUP;
+ init_data->type = IR_TYPE_RC5;
+ init_data->name = itv->card_name;
+ break;
+ case IVTV_HW_Z8F0811_IR_RX_HAUP:
+ /* Default to grey remote */
+ init_data->ir_codes = &ir_codes_hauppauge_new_table;
+ init_data->internal_get_key_func = IR_KBD_GET_KEY_HAUP_XVR;
+ init_data->type = IR_TYPE_RC5;
+ init_data->name = itv->card_name;
+ break;
+ }
+
+ memset(&info, 0, sizeof(struct i2c_board_info));
+ info.platform_data = init_data;
+ strlcpy(info.type, type, I2C_NAME_SIZE);
+
+ return i2c_new_probed_device(adap, &info, addr_list) == NULL ? -1 : 0;
+}
+
+/* Instantiate the IR receiver device using probing -- undesirable */
+struct i2c_client *ivtv_i2c_new_ir_legacy(struct ivtv *itv)
+{
+ struct i2c_board_info info;
+ /*
+ * The external IR receiver is at i2c address 0x34.
+ * The internal IR receiver is at i2c address 0x30.
+ *
+ * In theory, both can be fitted, and Hauppauge suggests an external
+ * overrides an internal. That's why we probe 0x1a (~0x34) first. CB
+ *
+ * Some of these addresses we probe may collide with other i2c address
+ * allocations, so this function must be called after all other i2c
+ * devices we care about are registered.
+ */
+ const unsigned short addr_list[] = {
+ 0x1a, /* Hauppauge IR external - collides with WM8739 */
+ 0x18, /* Hauppauge IR internal */
+ 0x71, /* Hauppauge IR (PVR150) */
+ 0x6b, /* Adaptec IR */
+ I2C_CLIENT_END
+ };
+
+ memset(&info, 0, sizeof(struct i2c_board_info));
+ strlcpy(info.type, "ir_video", I2C_NAME_SIZE);
+ return i2c_new_probed_device(&itv->i2c_adap, &info, addr_list);
+}
+
int ivtv_i2c_register(struct ivtv *itv, unsigned idx)
{
struct v4l2_subdev *sd;
@@ -178,8 +280,15 @@
sd->grp_id = 1 << idx;
return sd ? 0 : -1;
}
+
+ if (hw & IVTV_HW_IR_ANY)
+ return ivtv_i2c_new_ir(itv, hw, type, hw_addrs[idx]);
+
+ /* Is it not an I2C device or one we do not wish to register? */
if (!hw_addrs[idx])
return -1;
+
+ /* It's an I2C device other than an analog tuner or IR chip */
if (hw == IVTV_HW_UPD64031A || hw == IVTV_HW_UPD6408X) {
sd = v4l2_i2c_new_subdev(&itv->v4l2_dev,
adap, mod, type, 0, I2C_ADDRS(hw_addrs[idx]));
@@ -564,20 +673,22 @@
.owner = THIS_MODULE,
};
+#define IVTV_ALGO_BIT_TIMEOUT (2) /* seconds */
+
static const struct i2c_algo_bit_data ivtv_i2c_algo_template = {
.setsda = ivtv_setsda_old,
.setscl = ivtv_setscl_old,
.getsda = ivtv_getsda_old,
.getscl = ivtv_getscl_old,
- .udelay = 10,
- .timeout = 200,
+ .udelay = IVTV_DEFAULT_I2C_CLOCK_PERIOD / 2, /* microseconds */
+ .timeout = IVTV_ALGO_BIT_TIMEOUT * HZ, /* jiffies */
};
static struct i2c_client ivtv_i2c_client_template = {
.name = "ivtv internal",
};
-/* init + register i2c adapter + instantiate IR receiver */
+/* init + register i2c adapter */
int init_ivtv_i2c(struct ivtv *itv)
{
int retval;
@@ -585,11 +696,10 @@
IVTV_DEBUG_I2C("i2c init\n");
/* Sanity checks for the I2C hardware arrays. They must be the
- * same size and GPIO must be the last entry.
+ * same size.
*/
if (ARRAY_SIZE(hw_devicenames) != ARRAY_SIZE(hw_addrs) ||
- ARRAY_SIZE(hw_devicenames) != ARRAY_SIZE(hw_modules) ||
- IVTV_HW_GPIO != (1 << (ARRAY_SIZE(hw_addrs) - 1))) {
+ ARRAY_SIZE(hw_devicenames) != ARRAY_SIZE(hw_modules)) {
IVTV_ERR("Mismatched I2C hardware arrays\n");
return -ENODEV;
}
@@ -602,6 +712,7 @@
memcpy(&itv->i2c_algo, &ivtv_i2c_algo_template,
sizeof(struct i2c_algo_bit_data));
}
+ itv->i2c_algo.udelay = itv->options.i2c_clock_period / 2;
itv->i2c_algo.data = itv;
itv->i2c_adap.algo_data = &itv->i2c_algo;
@@ -623,32 +734,6 @@
else
retval = i2c_bit_add_bus(&itv->i2c_adap);
- /* Instantiate the IR receiver device, if present */
- if (retval == 0) {
- struct i2c_board_info info;
- /* The external IR receiver is at i2c address 0x34 (0x35 for
- reads). Future Hauppauge cards will have an internal
- receiver at 0x30 (0x31 for reads). In theory, both can be
- fitted, and Hauppauge suggest an external overrides an
- internal.
-
- That's why we probe 0x1a (~0x34) first. CB
- */
- const unsigned short addr_list[] = {
- 0x1a, /* Hauppauge IR external */
- 0x18, /* Hauppauge IR internal */
- 0x71, /* Hauppauge IR (PVR150) */
- 0x64, /* Pixelview IR */
- 0x30, /* KNC ONE IR */
- 0x6b, /* Adaptec IR */
- I2C_CLIENT_END
- };
-
- memset(&info, 0, sizeof(struct i2c_board_info));
- strlcpy(info.type, "ir_video", I2C_NAME_SIZE);
- i2c_new_probed_device(&itv->i2c_adap, &info, addr_list);
- }
-
return retval;
}
diff --git a/drivers/media/video/ivtv/ivtv-i2c.h b/drivers/media/video/ivtv/ivtv-i2c.h
index 396928a..9332920 100644
--- a/drivers/media/video/ivtv/ivtv-i2c.h
+++ b/drivers/media/video/ivtv/ivtv-i2c.h
@@ -21,6 +21,7 @@
#ifndef IVTV_I2C_H
#define IVTV_I2C_H
+struct i2c_client *ivtv_i2c_new_ir_legacy(struct ivtv *itv);
int ivtv_i2c_register(struct ivtv *itv, unsigned idx);
struct v4l2_subdev *ivtv_find_hw(struct ivtv *itv, u32 hw);
diff --git a/drivers/media/video/mxb.c b/drivers/media/video/mxb.c
index 3454070..c1fc6dc 100644
--- a/drivers/media/video/mxb.c
+++ b/drivers/media/video/mxb.c
@@ -478,7 +478,7 @@
DEB_EE(("VIDIOC_S_INPUT %d.\n", input));
- if (input < 0 || input >= MXB_INPUTS)
+ if (input >= MXB_INPUTS)
return -EINVAL;
mxb->cur_input = input;
diff --git a/drivers/media/video/ov772x.c b/drivers/media/video/ov772x.c
index eccb40a..2052293 100644
--- a/drivers/media/video/ov772x.c
+++ b/drivers/media/video/ov772x.c
@@ -247,7 +247,7 @@
/* COM5 */
#define AFR_ON_OFF 0x80 /* Auto frame rate control ON/OFF selection */
-#define AFR_SPPED 0x40 /* Auto frame rate control speed slection */
+#define AFR_SPPED 0x40 /* Auto frame rate control speed selection */
/* Auto frame rate max rate control */
#define AFR_NO_RATE 0x00 /* No reduction of frame rate */
#define AFR_1p2 0x10 /* Max reduction to 1/2 frame rate */
diff --git a/drivers/media/video/ov9640.c b/drivers/media/video/ov9640.c
new file mode 100644
index 0000000..c81ae219
--- /dev/null
+++ b/drivers/media/video/ov9640.c
@@ -0,0 +1,801 @@
+/*
+ * OmniVision OV96xx Camera Driver
+ *
+ * Copyright (C) 2009 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * Based on ov772x camera driver:
+ *
+ * Copyright (C) 2008 Renesas Solutions Corp.
+ * Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ *
+ * Based on ov7670 and soc_camera_platform driver,
+ *
+ * Copyright 2006-7 Jonathan Corbet <corbet@lwn.net>
+ * Copyright (C) 2008 Magnus Damm
+ * Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/videodev2.h>
+#include <media/v4l2-chip-ident.h>
+#include <media/v4l2-common.h>
+#include <media/soc_camera.h>
+
+#include "ov9640.h"
+
+/* default register setup */
+static const struct ov9640_reg ov9640_regs_dflt[] = {
+ { OV9640_COM5, OV9640_COM5_SYSCLK | OV9640_COM5_LONGEXP },
+ { OV9640_COM6, OV9640_COM6_OPT_BLC | OV9640_COM6_ADBLC_BIAS |
+ OV9640_COM6_FMT_RST | OV9640_COM6_ADBLC_OPTEN },
+ { OV9640_PSHFT, OV9640_PSHFT_VAL(0x01) },
+ { OV9640_ACOM, OV9640_ACOM_2X_ANALOG | OV9640_ACOM_RSVD },
+ { OV9640_TSLB, OV9640_TSLB_YUYV_UYVY },
+ { OV9640_COM16, OV9640_COM16_RB_AVG },
+
+ /* Gamma curve P */
+ { 0x6c, 0x40 }, { 0x6d, 0x30 }, { 0x6e, 0x4b }, { 0x6f, 0x60 },
+ { 0x70, 0x70 }, { 0x71, 0x70 }, { 0x72, 0x70 }, { 0x73, 0x70 },
+ { 0x74, 0x60 }, { 0x75, 0x60 }, { 0x76, 0x50 }, { 0x77, 0x48 },
+ { 0x78, 0x3a }, { 0x79, 0x2e }, { 0x7a, 0x28 }, { 0x7b, 0x22 },
+
+ /* Gamma curve T */
+ { 0x7c, 0x04 }, { 0x7d, 0x07 }, { 0x7e, 0x10 }, { 0x7f, 0x28 },
+ { 0x80, 0x36 }, { 0x81, 0x44 }, { 0x82, 0x52 }, { 0x83, 0x60 },
+ { 0x84, 0x6c }, { 0x85, 0x78 }, { 0x86, 0x8c }, { 0x87, 0x9e },
+ { 0x88, 0xbb }, { 0x89, 0xd2 }, { 0x8a, 0xe6 },
+};
+
+/* Configurations
+ * NOTE: for YUV, alter the following registers:
+ * COM12 |= OV9640_COM12_YUV_AVG
+ *
+ * for RGB, alter the following registers:
+ * COM7 |= OV9640_COM7_RGB
+ * COM13 |= OV9640_COM13_RGB_AVG
+ * COM15 |= proper RGB color encoding mode
+ */
+static const struct ov9640_reg ov9640_regs_qqcif[] = {
+ { OV9640_CLKRC, OV9640_CLKRC_DPLL_EN | OV9640_CLKRC_DIV(0x0f) },
+ { OV9640_COM1, OV9640_COM1_QQFMT | OV9640_COM1_HREF_2SKIP },
+ { OV9640_COM4, OV9640_COM4_QQ_VP | OV9640_COM4_RSVD },
+ { OV9640_COM7, OV9640_COM7_QCIF },
+ { OV9640_COM12, OV9640_COM12_RSVD },
+ { OV9640_COM13, OV9640_COM13_GAMMA_RAW | OV9640_COM13_MATRIX_EN },
+ { OV9640_COM15, OV9640_COM15_OR_10F0 },
+};
+
+static const struct ov9640_reg ov9640_regs_qqvga[] = {
+ { OV9640_CLKRC, OV9640_CLKRC_DPLL_EN | OV9640_CLKRC_DIV(0x07) },
+ { OV9640_COM1, OV9640_COM1_QQFMT | OV9640_COM1_HREF_2SKIP },
+ { OV9640_COM4, OV9640_COM4_QQ_VP | OV9640_COM4_RSVD },
+ { OV9640_COM7, OV9640_COM7_QVGA },
+ { OV9640_COM12, OV9640_COM12_RSVD },
+ { OV9640_COM13, OV9640_COM13_GAMMA_RAW | OV9640_COM13_MATRIX_EN },
+ { OV9640_COM15, OV9640_COM15_OR_10F0 },
+};
+
+static const struct ov9640_reg ov9640_regs_qcif[] = {
+ { OV9640_CLKRC, OV9640_CLKRC_DPLL_EN | OV9640_CLKRC_DIV(0x07) },
+ { OV9640_COM4, OV9640_COM4_QQ_VP | OV9640_COM4_RSVD },
+ { OV9640_COM7, OV9640_COM7_QCIF },
+ { OV9640_COM12, OV9640_COM12_RSVD },
+ { OV9640_COM13, OV9640_COM13_GAMMA_RAW | OV9640_COM13_MATRIX_EN },
+ { OV9640_COM15, OV9640_COM15_OR_10F0 },
+};
+
+static const struct ov9640_reg ov9640_regs_qvga[] = {
+ { OV9640_CLKRC, OV9640_CLKRC_DPLL_EN | OV9640_CLKRC_DIV(0x03) },
+ { OV9640_COM4, OV9640_COM4_QQ_VP | OV9640_COM4_RSVD },
+ { OV9640_COM7, OV9640_COM7_QVGA },
+ { OV9640_COM12, OV9640_COM12_RSVD },
+ { OV9640_COM13, OV9640_COM13_GAMMA_RAW | OV9640_COM13_MATRIX_EN },
+ { OV9640_COM15, OV9640_COM15_OR_10F0 },
+};
+
+static const struct ov9640_reg ov9640_regs_cif[] = {
+ { OV9640_CLKRC, OV9640_CLKRC_DPLL_EN | OV9640_CLKRC_DIV(0x03) },
+ { OV9640_COM3, OV9640_COM3_VP },
+ { OV9640_COM7, OV9640_COM7_CIF },
+ { OV9640_COM12, OV9640_COM12_RSVD },
+ { OV9640_COM13, OV9640_COM13_GAMMA_RAW | OV9640_COM13_MATRIX_EN },
+ { OV9640_COM15, OV9640_COM15_OR_10F0 },
+};
+
+static const struct ov9640_reg ov9640_regs_vga[] = {
+ { OV9640_CLKRC, OV9640_CLKRC_DPLL_EN | OV9640_CLKRC_DIV(0x01) },
+ { OV9640_COM3, OV9640_COM3_VP },
+ { OV9640_COM7, OV9640_COM7_VGA },
+ { OV9640_COM12, OV9640_COM12_RSVD },
+ { OV9640_COM13, OV9640_COM13_GAMMA_RAW | OV9640_COM13_MATRIX_EN },
+ { OV9640_COM15, OV9640_COM15_OR_10F0 },
+};
+
+static const struct ov9640_reg ov9640_regs_sxga[] = {
+ { OV9640_CLKRC, OV9640_CLKRC_DPLL_EN | OV9640_CLKRC_DIV(0x01) },
+ { OV9640_COM3, OV9640_COM3_VP },
+ { OV9640_COM7, 0 },
+ { OV9640_COM12, OV9640_COM12_RSVD },
+ { OV9640_COM13, OV9640_COM13_GAMMA_RAW | OV9640_COM13_MATRIX_EN },
+ { OV9640_COM15, OV9640_COM15_OR_10F0 },
+};
+
+static const struct ov9640_reg ov9640_regs_yuv[] = {
+ { OV9640_MTX1, 0x58 },
+ { OV9640_MTX2, 0x48 },
+ { OV9640_MTX3, 0x10 },
+ { OV9640_MTX4, 0x28 },
+ { OV9640_MTX5, 0x48 },
+ { OV9640_MTX6, 0x70 },
+ { OV9640_MTX7, 0x40 },
+ { OV9640_MTX8, 0x40 },
+ { OV9640_MTX9, 0x40 },
+ { OV9640_MTXS, 0x0f },
+};
+
+static const struct ov9640_reg ov9640_regs_rgb[] = {
+ { OV9640_MTX1, 0x71 },
+ { OV9640_MTX2, 0x3e },
+ { OV9640_MTX3, 0x0c },
+ { OV9640_MTX4, 0x33 },
+ { OV9640_MTX5, 0x72 },
+ { OV9640_MTX6, 0x00 },
+ { OV9640_MTX7, 0x2b },
+ { OV9640_MTX8, 0x66 },
+ { OV9640_MTX9, 0xd2 },
+ { OV9640_MTXS, 0x65 },
+};
+
+/*
+ * TODO: this sensor also supports RGB555 and RGB565 formats, but support for
+ * them has not yet been sufficiently tested and so it is not included with
+ * this version of the driver. To test and debug these formats add two entries
+ * to the below array, see ov722x.c for an example.
+ */
+static const struct soc_camera_data_format ov9640_fmt_lists[] = {
+ {
+ .name = "UYVY",
+ .fourcc = V4L2_PIX_FMT_UYVY,
+ .depth = 16,
+ .colorspace = V4L2_COLORSPACE_JPEG,
+ },
+};
+
+static const struct v4l2_queryctrl ov9640_controls[] = {
+ {
+ .id = V4L2_CID_VFLIP,
+ .type = V4L2_CTRL_TYPE_BOOLEAN,
+ .name = "Flip Vertically",
+ .minimum = 0,
+ .maximum = 1,
+ .step = 1,
+ .default_value = 0,
+ },
+ {
+ .id = V4L2_CID_HFLIP,
+ .type = V4L2_CTRL_TYPE_BOOLEAN,
+ .name = "Flip Horizontally",
+ .minimum = 0,
+ .maximum = 1,
+ .step = 1,
+ .default_value = 0,
+ },
+};
+
+/* read a register */
+static int ov9640_reg_read(struct i2c_client *client, u8 reg, u8 *val)
+{
+ int ret;
+ u8 data = reg;
+ struct i2c_msg msg = {
+ .addr = client->addr,
+ .flags = 0,
+ .len = 1,
+ .buf = &data,
+ };
+
+ ret = i2c_transfer(client->adapter, &msg, 1);
+ if (ret < 0)
+ goto err;
+
+ msg.flags = I2C_M_RD;
+ ret = i2c_transfer(client->adapter, &msg, 1);
+ if (ret < 0)
+ goto err;
+
+ *val = data;
+ return 0;
+
+err:
+ dev_err(&client->dev, "Failed reading register 0x%02x!\n", reg);
+ return ret;
+}
+
+/* write a register */
+static int ov9640_reg_write(struct i2c_client *client, u8 reg, u8 val)
+{
+ int ret;
+ u8 _val;
+ unsigned char data[2] = { reg, val };
+ struct i2c_msg msg = {
+ .addr = client->addr,
+ .flags = 0,
+ .len = 2,
+ .buf = data,
+ };
+
+ ret = i2c_transfer(client->adapter, &msg, 1);
+ if (ret < 0) {
+ dev_err(&client->dev, "Failed writing register 0x%02x!\n", reg);
+ return ret;
+ }
+
+ /* we have to read the register back ... no idea why, maybe HW bug */
+ ret = ov9640_reg_read(client, reg, &_val);
+ if (ret)
+ dev_err(&client->dev,
+ "Failed reading back register 0x%02x!\n", reg);
+
+ return 0;
+}
+
+
+/* Read a register, alter its bits, write it back */
+static int ov9640_reg_rmw(struct i2c_client *client, u8 reg, u8 set, u8 unset)
+{
+ u8 val;
+ int ret;
+
+ ret = ov9640_reg_read(client, reg, &val);
+ if (ret) {
+ dev_err(&client->dev,
+ "[Read]-Modify-Write of register %02x failed!\n", reg);
+ return val;
+ }
+
+ val |= set;
+ val &= ~unset;
+
+ ret = ov9640_reg_write(client, reg, val);
+ if (ret)
+ dev_err(&client->dev,
+ "Read-Modify-[Write] of register %02x failed!\n", reg);
+
+ return ret;
+}
+
+/* Soft reset the camera. This has nothing to do with the RESET pin! */
+static int ov9640_reset(struct i2c_client *client)
+{
+ int ret;
+
+ ret = ov9640_reg_write(client, OV9640_COM7, OV9640_COM7_SCCB_RESET);
+ if (ret)
+ dev_err(&client->dev,
+ "An error occured while entering soft reset!\n");
+
+ return ret;
+}
+
+/* Start/Stop streaming from the device */
+static int ov9640_s_stream(struct v4l2_subdev *sd, int enable)
+{
+ return 0;
+}
+
+/* Alter bus settings on camera side */
+static int ov9640_set_bus_param(struct soc_camera_device *icd,
+ unsigned long flags)
+{
+ return 0;
+}
+
+/* Request bus settings on camera side */
+static unsigned long ov9640_query_bus_param(struct soc_camera_device *icd)
+{
+ struct soc_camera_link *icl = to_soc_camera_link(icd);
+
+ /*
+ * REVISIT: the camera probably can do 10 bit transfers, but I don't
+ * have those pins connected on my hardware.
+ */
+ unsigned long flags = SOCAM_PCLK_SAMPLE_RISING | SOCAM_MASTER |
+ SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_HSYNC_ACTIVE_HIGH |
+ SOCAM_DATA_ACTIVE_HIGH | SOCAM_DATAWIDTH_8;
+
+ return soc_camera_apply_sensor_flags(icl, flags);
+}
+
+/* Get status of additional camera capabilities */
+static int ov9640_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+{
+ struct i2c_client *client = sd->priv;
+ struct ov9640_priv *priv = container_of(i2c_get_clientdata(client),
+ struct ov9640_priv, subdev);
+
+ switch (ctrl->id) {
+ case V4L2_CID_VFLIP:
+ ctrl->value = priv->flag_vflip;
+ break;
+ case V4L2_CID_HFLIP:
+ ctrl->value = priv->flag_hflip;
+ break;
+ }
+ return 0;
+}
+
+/* Set status of additional camera capabilities */
+static int ov9640_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+{
+ struct i2c_client *client = sd->priv;
+ struct ov9640_priv *priv = container_of(i2c_get_clientdata(client),
+ struct ov9640_priv, subdev);
+
+ int ret = 0;
+
+ switch (ctrl->id) {
+ case V4L2_CID_VFLIP:
+ priv->flag_vflip = ctrl->value;
+ if (ctrl->value)
+ ret = ov9640_reg_rmw(client, OV9640_MVFP,
+ OV9640_MVFP_V, 0);
+ else
+ ret = ov9640_reg_rmw(client, OV9640_MVFP,
+ 0, OV9640_MVFP_V);
+ break;
+ case V4L2_CID_HFLIP:
+ priv->flag_hflip = ctrl->value;
+ if (ctrl->value)
+ ret = ov9640_reg_rmw(client, OV9640_MVFP,
+ OV9640_MVFP_H, 0);
+ else
+ ret = ov9640_reg_rmw(client, OV9640_MVFP,
+ 0, OV9640_MVFP_H);
+ break;
+ }
+
+ return ret;
+}
+
+/* Get chip identification */
+static int ov9640_g_chip_ident(struct v4l2_subdev *sd,
+ struct v4l2_dbg_chip_ident *id)
+{
+ struct i2c_client *client = sd->priv;
+ struct ov9640_priv *priv = container_of(i2c_get_clientdata(client),
+ struct ov9640_priv, subdev);
+
+ id->ident = priv->model;
+ id->revision = priv->revision;
+
+ return 0;
+}
+
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+static int ov9640_get_register(struct v4l2_subdev *sd,
+ struct v4l2_dbg_register *reg)
+{
+ struct i2c_client *client = sd->priv;
+ int ret;
+ u8 val;
+
+ if (reg->reg & ~0xff)
+ return -EINVAL;
+
+ reg->size = 1;
+
+ ret = ov9640_reg_read(client, reg->reg, &val);
+ if (ret)
+ return ret;
+
+ reg->val = (__u64)val;
+
+ return 0;
+}
+
+static int ov9640_set_register(struct v4l2_subdev *sd,
+ struct v4l2_dbg_register *reg)
+{
+ struct i2c_client *client = sd->priv;
+
+ if (reg->reg & ~0xff || reg->val & ~0xff)
+ return -EINVAL;
+
+ return ov9640_reg_write(client, reg->reg, reg->val);
+}
+#endif
+
+/* select nearest higher resolution for capture */
+static void ov9640_res_roundup(u32 *width, u32 *height)
+{
+ int i;
+ enum { QQCIF, QQVGA, QCIF, QVGA, CIF, VGA, SXGA };
+ int res_x[] = { 88, 160, 176, 320, 352, 640, 1280 };
+ int res_y[] = { 72, 120, 144, 240, 288, 480, 960 };
+
+ for (i = 0; i < ARRAY_SIZE(res_x); i++) {
+ if (res_x[i] >= *width && res_y[i] >= *height) {
+ *width = res_x[i];
+ *height = res_y[i];
+ return;
+ }
+ }
+
+ *width = res_x[SXGA];
+ *height = res_y[SXGA];
+}
+
+/* Prepare necessary register changes depending on color encoding */
+static void ov9640_alter_regs(u32 pixfmt, struct ov9640_reg_alt *alt)
+{
+ switch (pixfmt) {
+ case V4L2_PIX_FMT_UYVY:
+ alt->com12 = OV9640_COM12_YUV_AVG;
+ alt->com13 = OV9640_COM13_Y_DELAY_EN |
+ OV9640_COM13_YUV_DLY(0x01);
+ break;
+ case V4L2_PIX_FMT_RGB555:
+ alt->com7 = OV9640_COM7_RGB;
+ alt->com13 = OV9640_COM13_RGB_AVG;
+ alt->com15 = OV9640_COM15_RGB_555;
+ break;
+ case V4L2_PIX_FMT_RGB565:
+ alt->com7 = OV9640_COM7_RGB;
+ alt->com13 = OV9640_COM13_RGB_AVG;
+ alt->com15 = OV9640_COM15_RGB_565;
+ break;
+ };
+}
+
+/* Setup registers according to resolution and color encoding */
+static int ov9640_write_regs(struct i2c_client *client,
+ u32 width, u32 pixfmt, struct ov9640_reg_alt *alts)
+{
+ const struct ov9640_reg *ov9640_regs, *matrix_regs;
+ int ov9640_regs_len, matrix_regs_len;
+ int i, ret;
+ u8 val;
+
+ /* select register configuration for given resolution */
+ switch (width) {
+ case W_QQCIF:
+ ov9640_regs = ov9640_regs_qqcif;
+ ov9640_regs_len = ARRAY_SIZE(ov9640_regs_qqcif);
+ break;
+ case W_QQVGA:
+ ov9640_regs = ov9640_regs_qqvga;
+ ov9640_regs_len = ARRAY_SIZE(ov9640_regs_qqvga);
+ break;
+ case W_QCIF:
+ ov9640_regs = ov9640_regs_qcif;
+ ov9640_regs_len = ARRAY_SIZE(ov9640_regs_qcif);
+ break;
+ case W_QVGA:
+ ov9640_regs = ov9640_regs_qvga;
+ ov9640_regs_len = ARRAY_SIZE(ov9640_regs_qvga);
+ break;
+ case W_CIF:
+ ov9640_regs = ov9640_regs_cif;
+ ov9640_regs_len = ARRAY_SIZE(ov9640_regs_cif);
+ break;
+ case W_VGA:
+ ov9640_regs = ov9640_regs_vga;
+ ov9640_regs_len = ARRAY_SIZE(ov9640_regs_vga);
+ break;
+ case W_SXGA:
+ ov9640_regs = ov9640_regs_sxga;
+ ov9640_regs_len = ARRAY_SIZE(ov9640_regs_sxga);
+ break;
+ default:
+ dev_err(&client->dev, "Failed to select resolution!\n");
+ return -EINVAL;
+ }
+
+ /* select color matrix configuration for given color encoding */
+ if (pixfmt == V4L2_PIX_FMT_UYVY) {
+ matrix_regs = ov9640_regs_yuv;
+ matrix_regs_len = ARRAY_SIZE(ov9640_regs_yuv);
+ } else {
+ matrix_regs = ov9640_regs_rgb;
+ matrix_regs_len = ARRAY_SIZE(ov9640_regs_rgb);
+ }
+
+ /* write register settings into the module */
+ for (i = 0; i < ov9640_regs_len; i++) {
+ val = ov9640_regs[i].val;
+
+ switch (ov9640_regs[i].reg) {
+ case OV9640_COM7:
+ val |= alts->com7;
+ break;
+ case OV9640_COM12:
+ val |= alts->com12;
+ break;
+ case OV9640_COM13:
+ val |= alts->com13;
+ break;
+ case OV9640_COM15:
+ val |= alts->com15;
+ break;
+ }
+
+ ret = ov9640_reg_write(client, ov9640_regs[i].reg, val);
+ if (ret)
+ return ret;
+ }
+
+ /* write color matrix configuration into the module */
+ for (i = 0; i < matrix_regs_len; i++) {
+ ret = ov9640_reg_write(client, matrix_regs[i].reg,
+ matrix_regs[i].val);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+/* program default register values */
+static int ov9640_prog_dflt(struct i2c_client *client)
+{
+ int i, ret;
+
+ for (i = 0; i < ARRAY_SIZE(ov9640_regs_dflt); i++) {
+ ret = ov9640_reg_write(client, ov9640_regs_dflt[i].reg,
+ ov9640_regs_dflt[i].val);
+ if (ret)
+ return ret;
+ }
+
+ /* wait for the changes to actually happen, 140ms are not enough yet */
+ mdelay(150);
+
+ return 0;
+}
+
+/* set the format we will capture in */
+static int ov9640_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *f)
+{
+ struct i2c_client *client = sd->priv;
+ struct v4l2_pix_format *pix = &f->fmt.pix;
+ struct ov9640_reg_alt alts = {0};
+ int ret;
+
+ ov9640_res_roundup(&pix->width, &pix->height);
+ ov9640_alter_regs(pix->pixelformat, &alts);
+
+ ov9640_reset(client);
+
+ ret = ov9640_prog_dflt(client);
+ if (ret)
+ return ret;
+
+ return ov9640_write_regs(client, pix->width, pix->pixelformat, &alts);
+}
+
+static int ov9640_try_fmt(struct v4l2_subdev *sd, struct v4l2_format *f)
+{
+ struct v4l2_pix_format *pix = &f->fmt.pix;
+
+ ov9640_res_roundup(&pix->width, &pix->height);
+ pix->field = V4L2_FIELD_NONE;
+
+ return 0;
+}
+
+static int ov9640_g_crop(struct v4l2_subdev *sd, struct v4l2_crop *a)
+{
+ a->c.left = 0;
+ a->c.top = 0;
+ a->c.width = W_SXGA;
+ a->c.height = H_SXGA;
+ a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+
+ return 0;
+}
+
+static int ov9640_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a)
+{
+ a->bounds.left = 0;
+ a->bounds.top = 0;
+ a->bounds.width = W_SXGA;
+ a->bounds.height = H_SXGA;
+ a->defrect = a->bounds;
+ a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+ a->pixelaspect.numerator = 1;
+ a->pixelaspect.denominator = 1;
+
+ return 0;
+}
+
+
+
+static int ov9640_video_probe(struct soc_camera_device *icd,
+ struct i2c_client *client)
+{
+ struct ov9640_priv *priv = i2c_get_clientdata(client);
+ u8 pid, ver, midh, midl;
+ const char *devname;
+ int ret = 0;
+
+ /*
+ * We must have a parent by now. And it cannot be a wrong one.
+ * So this entire test is completely redundant.
+ */
+ if (!icd->dev.parent ||
+ to_soc_camera_host(icd->dev.parent)->nr != icd->iface) {
+ dev_err(&client->dev, "Parent missing or invalid!\n");
+ ret = -ENODEV;
+ goto err;
+ }
+
+ icd->formats = ov9640_fmt_lists;
+ icd->num_formats = ARRAY_SIZE(ov9640_fmt_lists);
+
+ /*
+ * check and show product ID and manufacturer ID
+ */
+
+ ret = ov9640_reg_read(client, OV9640_PID, &pid);
+ if (ret)
+ goto err;
+
+ ret = ov9640_reg_read(client, OV9640_VER, &ver);
+ if (ret)
+ goto err;
+
+ ret = ov9640_reg_read(client, OV9640_MIDH, &midh);
+ if (ret)
+ goto err;
+
+ ret = ov9640_reg_read(client, OV9640_MIDL, &midl);
+ if (ret)
+ goto err;
+
+ switch (VERSION(pid, ver)) {
+ case OV9640_V2:
+ devname = "ov9640";
+ priv->model = V4L2_IDENT_OV9640;
+ priv->revision = 2;
+ case OV9640_V3:
+ devname = "ov9640";
+ priv->model = V4L2_IDENT_OV9640;
+ priv->revision = 3;
+ break;
+ default:
+ dev_err(&client->dev, "Product ID error %x:%x\n", pid, ver);
+ ret = -ENODEV;
+ goto err;
+ }
+
+ dev_info(&client->dev, "%s Product ID %0x:%0x Manufacturer ID %x:%x\n",
+ devname, pid, ver, midh, midl);
+
+err:
+ return ret;
+}
+
+static struct soc_camera_ops ov9640_ops = {
+ .set_bus_param = ov9640_set_bus_param,
+ .query_bus_param = ov9640_query_bus_param,
+ .controls = ov9640_controls,
+ .num_controls = ARRAY_SIZE(ov9640_controls),
+};
+
+static struct v4l2_subdev_core_ops ov9640_core_ops = {
+ .g_ctrl = ov9640_g_ctrl,
+ .s_ctrl = ov9640_s_ctrl,
+ .g_chip_ident = ov9640_g_chip_ident,
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+ .g_register = ov9640_get_register,
+ .s_register = ov9640_set_register,
+#endif
+
+};
+
+static struct v4l2_subdev_video_ops ov9640_video_ops = {
+ .s_stream = ov9640_s_stream,
+ .s_fmt = ov9640_s_fmt,
+ .try_fmt = ov9640_try_fmt,
+ .cropcap = ov9640_cropcap,
+ .g_crop = ov9640_g_crop,
+
+};
+
+static struct v4l2_subdev_ops ov9640_subdev_ops = {
+ .core = &ov9640_core_ops,
+ .video = &ov9640_video_ops,
+};
+
+/*
+ * i2c_driver function
+ */
+static int ov9640_probe(struct i2c_client *client,
+ const struct i2c_device_id *did)
+{
+ struct ov9640_priv *priv;
+ struct soc_camera_device *icd = client->dev.platform_data;
+ struct soc_camera_link *icl;
+ int ret;
+
+ if (!icd) {
+ dev_err(&client->dev, "Missing soc-camera data!\n");
+ return -EINVAL;
+ }
+
+ icl = to_soc_camera_link(icd);
+ if (!icl) {
+ dev_err(&client->dev, "Missing platform_data for driver\n");
+ return -EINVAL;
+ }
+
+ priv = kzalloc(sizeof(struct ov9640_priv), GFP_KERNEL);
+ if (!priv) {
+ dev_err(&client->dev,
+ "Failed to allocate memory for private data!\n");
+ return -ENOMEM;
+ }
+
+ v4l2_i2c_subdev_init(&priv->subdev, client, &ov9640_subdev_ops);
+
+ icd->ops = &ov9640_ops;
+
+ ret = ov9640_video_probe(icd, client);
+
+ if (ret) {
+ icd->ops = NULL;
+ i2c_set_clientdata(client, NULL);
+ kfree(priv);
+ }
+
+ return ret;
+}
+
+static int ov9640_remove(struct i2c_client *client)
+{
+ struct ov9640_priv *priv = i2c_get_clientdata(client);
+
+ i2c_set_clientdata(client, NULL);
+ kfree(priv);
+ return 0;
+}
+
+static const struct i2c_device_id ov9640_id[] = {
+ { "ov9640", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, ov9640_id);
+
+static struct i2c_driver ov9640_i2c_driver = {
+ .driver = {
+ .name = "ov9640",
+ },
+ .probe = ov9640_probe,
+ .remove = ov9640_remove,
+ .id_table = ov9640_id,
+};
+
+static int __init ov9640_module_init(void)
+{
+ return i2c_add_driver(&ov9640_i2c_driver);
+}
+
+static void __exit ov9640_module_exit(void)
+{
+ i2c_del_driver(&ov9640_i2c_driver);
+}
+
+module_init(ov9640_module_init);
+module_exit(ov9640_module_exit);
+
+MODULE_DESCRIPTION("SoC Camera driver for OmniVision OV96xx");
+MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/media/video/ov9640.h b/drivers/media/video/ov9640.h
new file mode 100644
index 0000000..f8a51b7
--- /dev/null
+++ b/drivers/media/video/ov9640.h
@@ -0,0 +1,209 @@
+/*
+ * OmniVision OV96xx Camera Header File
+ *
+ * Copyright (C) 2009 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __DRIVERS_MEDIA_VIDEO_OV9640_H__
+#define __DRIVERS_MEDIA_VIDEO_OV9640_H__
+
+/* Register definitions */
+#define OV9640_GAIN 0x00
+#define OV9640_BLUE 0x01
+#define OV9640_RED 0x02
+#define OV9640_VFER 0x03
+#define OV9640_COM1 0x04
+#define OV9640_BAVE 0x05
+#define OV9640_GEAVE 0x06
+#define OV9640_RSID 0x07
+#define OV9640_RAVE 0x08
+#define OV9640_COM2 0x09
+#define OV9640_PID 0x0a
+#define OV9640_VER 0x0b
+#define OV9640_COM3 0x0c
+#define OV9640_COM4 0x0d
+#define OV9640_COM5 0x0e
+#define OV9640_COM6 0x0f
+#define OV9640_AECH 0x10
+#define OV9640_CLKRC 0x11
+#define OV9640_COM7 0x12
+#define OV9640_COM8 0x13
+#define OV9640_COM9 0x14
+#define OV9640_COM10 0x15
+/* 0x16 - RESERVED */
+#define OV9640_HSTART 0x17
+#define OV9640_HSTOP 0x18
+#define OV9640_VSTART 0x19
+#define OV9640_VSTOP 0x1a
+#define OV9640_PSHFT 0x1b
+#define OV9640_MIDH 0x1c
+#define OV9640_MIDL 0x1d
+#define OV9640_MVFP 0x1e
+#define OV9640_LAEC 0x1f
+#define OV9640_BOS 0x20
+#define OV9640_GBOS 0x21
+#define OV9640_GROS 0x22
+#define OV9640_ROS 0x23
+#define OV9640_AEW 0x24
+#define OV9640_AEB 0x25
+#define OV9640_VPT 0x26
+#define OV9640_BBIAS 0x27
+#define OV9640_GBBIAS 0x28
+/* 0x29 - RESERVED */
+#define OV9640_EXHCH 0x2a
+#define OV9640_EXHCL 0x2b
+#define OV9640_RBIAS 0x2c
+#define OV9640_ADVFL 0x2d
+#define OV9640_ADVFH 0x2e
+#define OV9640_YAVE 0x2f
+#define OV9640_HSYST 0x30
+#define OV9640_HSYEN 0x31
+#define OV9640_HREF 0x32
+#define OV9640_CHLF 0x33
+#define OV9640_ARBLM 0x34
+/* 0x35..0x36 - RESERVED */
+#define OV9640_ADC 0x37
+#define OV9640_ACOM 0x38
+#define OV9640_OFON 0x39
+#define OV9640_TSLB 0x3a
+#define OV9640_COM11 0x3b
+#define OV9640_COM12 0x3c
+#define OV9640_COM13 0x3d
+#define OV9640_COM14 0x3e
+#define OV9640_EDGE 0x3f
+#define OV9640_COM15 0x40
+#define OV9640_COM16 0x41
+#define OV9640_COM17 0x42
+/* 0x43..0x4e - RESERVED */
+#define OV9640_MTX1 0x4f
+#define OV9640_MTX2 0x50
+#define OV9640_MTX3 0x51
+#define OV9640_MTX4 0x52
+#define OV9640_MTX5 0x53
+#define OV9640_MTX6 0x54
+#define OV9640_MTX7 0x55
+#define OV9640_MTX8 0x56
+#define OV9640_MTX9 0x57
+#define OV9640_MTXS 0x58
+/* 0x59..0x61 - RESERVED */
+#define OV9640_LCC1 0x62
+#define OV9640_LCC2 0x63
+#define OV9640_LCC3 0x64
+#define OV9640_LCC4 0x65
+#define OV9640_LCC5 0x66
+#define OV9640_MANU 0x67
+#define OV9640_MANV 0x68
+#define OV9640_HV 0x69
+#define OV9640_MBD 0x6a
+#define OV9640_DBLV 0x6b
+#define OV9640_GSP 0x6c /* ... till 0x7b */
+#define OV9640_GST 0x7c /* ... till 0x8a */
+
+#define OV9640_CLKRC_DPLL_EN 0x80
+#define OV9640_CLKRC_DIRECT 0x40
+#define OV9640_CLKRC_DIV(x) ((x) & 0x3f)
+
+#define OV9640_PSHFT_VAL(x) ((x) & 0xff)
+
+#define OV9640_ACOM_2X_ANALOG 0x80
+#define OV9640_ACOM_RSVD 0x12
+
+#define OV9640_MVFP_V 0x10
+#define OV9640_MVFP_H 0x20
+
+#define OV9640_COM1_HREF_NOSKIP 0x00
+#define OV9640_COM1_HREF_2SKIP 0x04
+#define OV9640_COM1_HREF_3SKIP 0x08
+#define OV9640_COM1_QQFMT 0x20
+
+#define OV9640_COM2_SSM 0x10
+
+#define OV9640_COM3_VP 0x04
+
+#define OV9640_COM4_QQ_VP 0x80
+#define OV9640_COM4_RSVD 0x40
+
+#define OV9640_COM5_SYSCLK 0x80
+#define OV9640_COM5_LONGEXP 0x01
+
+#define OV9640_COM6_OPT_BLC 0x40
+#define OV9640_COM6_ADBLC_BIAS 0x08
+#define OV9640_COM6_FMT_RST 0x82
+#define OV9640_COM6_ADBLC_OPTEN 0x01
+
+#define OV9640_COM7_RAW_RGB 0x01
+#define OV9640_COM7_RGB 0x04
+#define OV9640_COM7_QCIF 0x08
+#define OV9640_COM7_QVGA 0x10
+#define OV9640_COM7_CIF 0x20
+#define OV9640_COM7_VGA 0x40
+#define OV9640_COM7_SCCB_RESET 0x80
+
+#define OV9640_TSLB_YVYU_YUYV 0x04
+#define OV9640_TSLB_YUYV_UYVY 0x08
+
+#define OV9640_COM12_YUV_AVG 0x04
+#define OV9640_COM12_RSVD 0x40
+
+#define OV9640_COM13_GAMMA_NONE 0x00
+#define OV9640_COM13_GAMMA_Y 0x40
+#define OV9640_COM13_GAMMA_RAW 0x80
+#define OV9640_COM13_RGB_AVG 0x20
+#define OV9640_COM13_MATRIX_EN 0x10
+#define OV9640_COM13_Y_DELAY_EN 0x08
+#define OV9640_COM13_YUV_DLY(x) ((x) & 0x07)
+
+#define OV9640_COM15_OR_00FF 0x00
+#define OV9640_COM15_OR_01FE 0x40
+#define OV9640_COM15_OR_10F0 0xc0
+#define OV9640_COM15_RGB_NORM 0x00
+#define OV9640_COM15_RGB_565 0x10
+#define OV9640_COM15_RGB_555 0x30
+
+#define OV9640_COM16_RB_AVG 0x01
+
+/* IDs */
+#define OV9640_V2 0x9648
+#define OV9640_V3 0x9649
+#define VERSION(pid, ver) (((pid) << 8) | ((ver) & 0xFF))
+
+/* supported resolutions */
+enum {
+ W_QQCIF = 88,
+ W_QQVGA = 160,
+ W_QCIF = 176,
+ W_QVGA = 320,
+ W_CIF = 352,
+ W_VGA = 640,
+ W_SXGA = 1280
+};
+#define H_SXGA 960
+
+/* Misc. structures */
+struct ov9640_reg_alt {
+ u8 com7;
+ u8 com12;
+ u8 com13;
+ u8 com15;
+};
+
+struct ov9640_reg {
+ u8 reg;
+ u8 val;
+};
+
+struct ov9640_priv {
+ struct v4l2_subdev subdev;
+
+ int model;
+ int revision;
+
+ bool flag_vflip;
+ bool flag_hflip;
+};
+
+#endif /* __DRIVERS_MEDIA_VIDEO_OV9640_H__ */
diff --git a/drivers/media/video/pms.c b/drivers/media/video/pms.c
index a1ad38f..73ec970 100644
--- a/drivers/media/video/pms.c
+++ b/drivers/media/video/pms.c
@@ -14,8 +14,10 @@
* unless the userspace driver also doesn't work for you...
*
* Changes:
- * 08/07/2003 Daniele Bellucci <bellucda@tiscali.it>
- * - pms_capture: report back -EFAULT
+ * 25-11-2009 Hans Verkuil <hverkuil@xs4all.nl>
+ * - converted to version 2 of the V4L API.
+ * 08/07/2003 Daniele Bellucci <bellucda@tiscali.it>
+ * - pms_capture: report back -EFAULT
*/
#include <linux/module.h>
@@ -27,175 +29,183 @@
#include <linux/mm.h>
#include <linux/ioport.h>
#include <linux/init.h>
+#include <linux/version.h>
+#include <linux/mutex.h>
+#include <asm/uaccess.h>
#include <asm/io.h>
-#include <linux/videodev.h>
+
+#include <linux/videodev2.h>
#include <media/v4l2-common.h>
#include <media/v4l2-ioctl.h>
-#include <linux/mutex.h>
+#include <media/v4l2-device.h>
-#include <asm/uaccess.h>
+MODULE_LICENSE("GPL");
#define MOTOROLA 1
-#define PHILIPS2 2
+#define PHILIPS2 2 /* SAA7191 */
#define PHILIPS1 3
#define MVVMEMORYWIDTH 0x40 /* 512 bytes */
-struct pms_device
-{
- struct video_device v;
- struct video_picture picture;
- int height;
- int width;
- unsigned long in_use;
- struct mutex lock;
-};
-
-struct i2c_info
-{
+struct i2c_info {
u8 slave;
u8 sub;
u8 data;
u8 hits;
};
-static int i2c_count;
-static struct i2c_info i2cinfo[64];
+struct pms {
+ struct v4l2_device v4l2_dev;
+ struct video_device vdev;
+ int height;
+ int width;
+ int depth;
+ int input;
+ s32 brightness, saturation, hue, contrast;
+ unsigned long in_use;
+ struct mutex lock;
+ int i2c_count;
+ struct i2c_info i2cinfo[64];
-static int decoder = PHILIPS2;
-static int standard; /* 0 - auto 1 - ntsc 2 - pal 3 - secam */
+ int decoder;
+ int standard; /* 0 - auto 1 - ntsc 2 - pal 3 - secam */
+ v4l2_std_id std;
+ int io;
+ int data;
+ void __iomem *mem;
+};
+
+static struct pms pms_card;
/*
* I/O ports and Shared Memory
*/
-static int io_port = 0x250;
-static int data_port = 0x251;
-static int mem_base = 0xC8000;
-static void __iomem *mem;
-static int video_nr = -1;
+static int io_port = 0x250;
+module_param(io_port, int, 0);
+
+static int mem_base = 0xc8000;
+module_param(mem_base, int, 0);
+
+static int video_nr = -1;
+module_param(video_nr, int, 0);
-
-static inline void mvv_write(u8 index, u8 value)
+static inline void mvv_write(struct pms *dev, u8 index, u8 value)
{
- outw(index|(value<<8), io_port);
+ outw(index | (value << 8), dev->io);
}
-static inline u8 mvv_read(u8 index)
+static inline u8 mvv_read(struct pms *dev, u8 index)
{
- outb(index, io_port);
- return inb(data_port);
+ outb(index, dev->io);
+ return inb(dev->data);
}
-static int pms_i2c_stat(u8 slave)
+static int pms_i2c_stat(struct pms *dev, u8 slave)
{
- int counter;
+ int counter = 0;
int i;
- outb(0x28, io_port);
+ outb(0x28, dev->io);
- counter=0;
- while((inb(data_port)&0x01)==0)
- if(counter++==256)
+ while ((inb(dev->data) & 0x01) == 0)
+ if (counter++ == 256)
break;
- while((inb(data_port)&0x01)!=0)
- if(counter++==256)
+ while ((inb(dev->data) & 0x01) != 0)
+ if (counter++ == 256)
break;
- outb(slave, io_port);
+ outb(slave, dev->io);
- counter=0;
- while((inb(data_port)&0x01)==0)
- if(counter++==256)
+ counter = 0;
+ while ((inb(dev->data) & 0x01) == 0)
+ if (counter++ == 256)
break;
- while((inb(data_port)&0x01)!=0)
- if(counter++==256)
+ while ((inb(dev->data) & 0x01) != 0)
+ if (counter++ == 256)
break;
- for(i=0;i<12;i++)
- {
- char st=inb(data_port);
- if((st&2)!=0)
+ for (i = 0; i < 12; i++) {
+ char st = inb(dev->data);
+
+ if ((st & 2) != 0)
return -1;
- if((st&1)==0)
+ if ((st & 1) == 0)
break;
}
- outb(0x29, io_port);
- return inb(data_port);
+ outb(0x29, dev->io);
+ return inb(dev->data);
}
-static int pms_i2c_write(u16 slave, u16 sub, u16 data)
+static int pms_i2c_write(struct pms *dev, u16 slave, u16 sub, u16 data)
{
- int skip=0;
+ int skip = 0;
int count;
int i;
- for(i=0;i<i2c_count;i++)
- {
- if((i2cinfo[i].slave==slave) &&
- (i2cinfo[i].sub == sub))
- {
- if(i2cinfo[i].data==data)
- skip=1;
- i2cinfo[i].data=data;
- i=i2c_count+1;
+ for (i = 0; i < dev->i2c_count; i++) {
+ if ((dev->i2cinfo[i].slave == slave) &&
+ (dev->i2cinfo[i].sub == sub)) {
+ if (dev->i2cinfo[i].data == data)
+ skip = 1;
+ dev->i2cinfo[i].data = data;
+ i = dev->i2c_count + 1;
}
}
- if(i==i2c_count && i2c_count<64)
- {
- i2cinfo[i2c_count].slave=slave;
- i2cinfo[i2c_count].sub=sub;
- i2cinfo[i2c_count].data=data;
- i2c_count++;
+ if (i == dev->i2c_count && dev->i2c_count < 64) {
+ dev->i2cinfo[dev->i2c_count].slave = slave;
+ dev->i2cinfo[dev->i2c_count].sub = sub;
+ dev->i2cinfo[dev->i2c_count].data = data;
+ dev->i2c_count++;
}
- if(skip)
+ if (skip)
return 0;
- mvv_write(0x29, sub);
- mvv_write(0x2A, data);
- mvv_write(0x28, slave);
+ mvv_write(dev, 0x29, sub);
+ mvv_write(dev, 0x2A, data);
+ mvv_write(dev, 0x28, slave);
- outb(0x28, io_port);
+ outb(0x28, dev->io);
- count=0;
- while((inb(data_port)&1)==0)
- if(count>255)
+ count = 0;
+ while ((inb(dev->data) & 1) == 0)
+ if (count > 255)
break;
- while((inb(data_port)&1)!=0)
- if(count>255)
+ while ((inb(dev->data) & 1) != 0)
+ if (count > 255)
break;
- count=inb(data_port);
+ count = inb(dev->data);
- if(count&2)
+ if (count & 2)
return -1;
return count;
}
-static int pms_i2c_read(int slave, int sub)
+static int pms_i2c_read(struct pms *dev, int slave, int sub)
{
- int i=0;
- for(i=0;i<i2c_count;i++)
- {
- if(i2cinfo[i].slave==slave && i2cinfo[i].sub==sub)
- return i2cinfo[i].data;
+ int i;
+
+ for (i = 0; i < dev->i2c_count; i++) {
+ if (dev->i2cinfo[i].slave == slave && dev->i2cinfo[i].sub == sub)
+ return dev->i2cinfo[i].data;
}
return 0;
}
-static void pms_i2c_andor(int slave, int sub, int and, int or)
+static void pms_i2c_andor(struct pms *dev, int slave, int sub, int and, int or)
{
u8 tmp;
- tmp=pms_i2c_read(slave, sub);
- tmp = (tmp&and)|or;
- pms_i2c_write(slave, sub, tmp);
+ tmp = pms_i2c_read(dev, slave, sub);
+ tmp = (tmp & and) | or;
+ pms_i2c_write(dev, slave, sub, tmp);
}
/*
@@ -203,100 +213,108 @@
*/
-static void pms_videosource(short source)
+static void pms_videosource(struct pms *dev, short source)
{
- mvv_write(0x2E, source?0x31:0x30);
+ switch (dev->decoder) {
+ case MOTOROLA:
+ break;
+ case PHILIPS2:
+ pms_i2c_andor(dev, 0x8a, 0x06, 0x7f, source ? 0x80 : 0);
+ break;
+ case PHILIPS1:
+ break;
+ }
+ mvv_write(dev, 0x2E, 0x31);
+ /* Was: mvv_write(dev, 0x2E, source ? 0x31 : 0x30);
+ But could not make this work correctly. Only Composite input
+ worked for me. */
}
-static void pms_hue(short hue)
+static void pms_hue(struct pms *dev, short hue)
{
- switch(decoder)
- {
- case MOTOROLA:
- pms_i2c_write(0x8A, 0x00, hue);
- break;
- case PHILIPS2:
- pms_i2c_write(0x8A, 0x07, hue);
- break;
- case PHILIPS1:
- pms_i2c_write(0x42, 0x07, hue);
- break;
+ switch (dev->decoder) {
+ case MOTOROLA:
+ pms_i2c_write(dev, 0x8a, 0x00, hue);
+ break;
+ case PHILIPS2:
+ pms_i2c_write(dev, 0x8a, 0x07, hue);
+ break;
+ case PHILIPS1:
+ pms_i2c_write(dev, 0x42, 0x07, hue);
+ break;
}
}
-static void pms_colour(short colour)
+static void pms_saturation(struct pms *dev, short sat)
{
- switch(decoder)
- {
- case MOTOROLA:
- pms_i2c_write(0x8A, 0x00, colour);
- break;
- case PHILIPS1:
- pms_i2c_write(0x42, 0x12, colour);
- break;
+ switch (dev->decoder) {
+ case MOTOROLA:
+ pms_i2c_write(dev, 0x8a, 0x00, sat);
+ break;
+ case PHILIPS1:
+ pms_i2c_write(dev, 0x42, 0x12, sat);
+ break;
}
}
-static void pms_contrast(short contrast)
+static void pms_contrast(struct pms *dev, short contrast)
{
- switch(decoder)
- {
- case MOTOROLA:
- pms_i2c_write(0x8A, 0x00, contrast);
- break;
- case PHILIPS1:
- pms_i2c_write(0x42, 0x13, contrast);
- break;
+ switch (dev->decoder) {
+ case MOTOROLA:
+ pms_i2c_write(dev, 0x8a, 0x00, contrast);
+ break;
+ case PHILIPS1:
+ pms_i2c_write(dev, 0x42, 0x13, contrast);
+ break;
}
}
-static void pms_brightness(short brightness)
+static void pms_brightness(struct pms *dev, short brightness)
{
- switch(decoder)
- {
- case MOTOROLA:
- pms_i2c_write(0x8A, 0x00, brightness);
- pms_i2c_write(0x8A, 0x00, brightness);
- pms_i2c_write(0x8A, 0x00, brightness);
- break;
- case PHILIPS1:
- pms_i2c_write(0x42, 0x19, brightness);
- break;
+ switch (dev->decoder) {
+ case MOTOROLA:
+ pms_i2c_write(dev, 0x8a, 0x00, brightness);
+ pms_i2c_write(dev, 0x8a, 0x00, brightness);
+ pms_i2c_write(dev, 0x8a, 0x00, brightness);
+ break;
+ case PHILIPS1:
+ pms_i2c_write(dev, 0x42, 0x19, brightness);
+ break;
}
}
-static void pms_format(short format)
+static void pms_format(struct pms *dev, short format)
{
int target;
- standard = format;
- if(decoder==PHILIPS1)
- target=0x42;
- else if(decoder==PHILIPS2)
- target=0x8A;
+ dev->standard = format;
+
+ if (dev->decoder == PHILIPS1)
+ target = 0x42;
+ else if (dev->decoder == PHILIPS2)
+ target = 0x8a;
else
return;
- switch(format)
- {
- case 0: /* Auto */
- pms_i2c_andor(target, 0x0D, 0xFE,0x00);
- pms_i2c_andor(target, 0x0F, 0x3F,0x80);
- break;
- case 1: /* NTSC */
- pms_i2c_andor(target, 0x0D, 0xFE, 0x00);
- pms_i2c_andor(target, 0x0F, 0x3F, 0x40);
- break;
- case 2: /* PAL */
- pms_i2c_andor(target, 0x0D, 0xFE, 0x00);
- pms_i2c_andor(target, 0x0F, 0x3F, 0x00);
- break;
- case 3: /* SECAM */
- pms_i2c_andor(target, 0x0D, 0xFE, 0x01);
- pms_i2c_andor(target, 0x0F, 0x3F, 0x00);
- break;
+ switch (format) {
+ case 0: /* Auto */
+ pms_i2c_andor(dev, target, 0x0d, 0xfe, 0x00);
+ pms_i2c_andor(dev, target, 0x0f, 0x3f, 0x80);
+ break;
+ case 1: /* NTSC */
+ pms_i2c_andor(dev, target, 0x0d, 0xfe, 0x00);
+ pms_i2c_andor(dev, target, 0x0f, 0x3f, 0x40);
+ break;
+ case 2: /* PAL */
+ pms_i2c_andor(dev, target, 0x0d, 0xfe, 0x00);
+ pms_i2c_andor(dev, target, 0x0f, 0x3f, 0x00);
+ break;
+ case 3: /* SECAM */
+ pms_i2c_andor(dev, target, 0x0d, 0xfe, 0x01);
+ pms_i2c_andor(dev, target, 0x0f, 0x3f, 0x00);
+ break;
}
}
@@ -308,18 +326,17 @@
* people need it. We also don't yet use the PMS interrupt.
*/
-static void pms_hstart(short start)
+static void pms_hstart(struct pms *dev, short start)
{
- switch(decoder)
- {
- case PHILIPS1:
- pms_i2c_write(0x8A, 0x05, start);
- pms_i2c_write(0x8A, 0x18, start);
- break;
- case PHILIPS2:
- pms_i2c_write(0x42, 0x05, start);
- pms_i2c_write(0x42, 0x18, start);
- break;
+ switch (dev->decoder) {
+ case PHILIPS1:
+ pms_i2c_write(dev, 0x8a, 0x05, start);
+ pms_i2c_write(dev, 0x8a, 0x18, start);
+ break;
+ case PHILIPS2:
+ pms_i2c_write(dev, 0x42, 0x05, start);
+ pms_i2c_write(dev, 0x42, 0x18, start);
+ break;
}
}
@@ -327,293 +344,271 @@
* Bandpass filters
*/
-static void pms_bandpass(short pass)
+static void pms_bandpass(struct pms *dev, short pass)
{
- if(decoder==PHILIPS2)
- pms_i2c_andor(0x8A, 0x06, 0xCF, (pass&0x03)<<4);
- else if(decoder==PHILIPS1)
- pms_i2c_andor(0x42, 0x06, 0xCF, (pass&0x03)<<4);
+ if (dev->decoder == PHILIPS2)
+ pms_i2c_andor(dev, 0x8a, 0x06, 0xcf, (pass & 0x03) << 4);
+ else if (dev->decoder == PHILIPS1)
+ pms_i2c_andor(dev, 0x42, 0x06, 0xcf, (pass & 0x03) << 4);
}
-static void pms_antisnow(short snow)
+static void pms_antisnow(struct pms *dev, short snow)
{
- if(decoder==PHILIPS2)
- pms_i2c_andor(0x8A, 0x06, 0xF3, (snow&0x03)<<2);
- else if(decoder==PHILIPS1)
- pms_i2c_andor(0x42, 0x06, 0xF3, (snow&0x03)<<2);
+ if (dev->decoder == PHILIPS2)
+ pms_i2c_andor(dev, 0x8a, 0x06, 0xf3, (snow & 0x03) << 2);
+ else if (dev->decoder == PHILIPS1)
+ pms_i2c_andor(dev, 0x42, 0x06, 0xf3, (snow & 0x03) << 2);
}
-static void pms_sharpness(short sharp)
+static void pms_sharpness(struct pms *dev, short sharp)
{
- if(decoder==PHILIPS2)
- pms_i2c_andor(0x8A, 0x06, 0xFC, sharp&0x03);
- else if(decoder==PHILIPS1)
- pms_i2c_andor(0x42, 0x06, 0xFC, sharp&0x03);
+ if (dev->decoder == PHILIPS2)
+ pms_i2c_andor(dev, 0x8a, 0x06, 0xfc, sharp & 0x03);
+ else if (dev->decoder == PHILIPS1)
+ pms_i2c_andor(dev, 0x42, 0x06, 0xfc, sharp & 0x03);
}
-static void pms_chromaagc(short agc)
+static void pms_chromaagc(struct pms *dev, short agc)
{
- if(decoder==PHILIPS2)
- pms_i2c_andor(0x8A, 0x0C, 0x9F, (agc&0x03)<<5);
- else if(decoder==PHILIPS1)
- pms_i2c_andor(0x42, 0x0C, 0x9F, (agc&0x03)<<5);
+ if (dev->decoder == PHILIPS2)
+ pms_i2c_andor(dev, 0x8a, 0x0c, 0x9f, (agc & 0x03) << 5);
+ else if (dev->decoder == PHILIPS1)
+ pms_i2c_andor(dev, 0x42, 0x0c, 0x9f, (agc & 0x03) << 5);
}
-static void pms_vertnoise(short noise)
+static void pms_vertnoise(struct pms *dev, short noise)
{
- if(decoder==PHILIPS2)
- pms_i2c_andor(0x8A, 0x10, 0xFC, noise&3);
- else if(decoder==PHILIPS1)
- pms_i2c_andor(0x42, 0x10, 0xFC, noise&3);
+ if (dev->decoder == PHILIPS2)
+ pms_i2c_andor(dev, 0x8a, 0x10, 0xfc, noise & 3);
+ else if (dev->decoder == PHILIPS1)
+ pms_i2c_andor(dev, 0x42, 0x10, 0xfc, noise & 3);
}
-static void pms_forcecolour(short colour)
+static void pms_forcecolour(struct pms *dev, short colour)
{
- if(decoder==PHILIPS2)
- pms_i2c_andor(0x8A, 0x0C, 0x7F, (colour&1)<<7);
- else if(decoder==PHILIPS1)
- pms_i2c_andor(0x42, 0x0C, 0x7, (colour&1)<<7);
+ if (dev->decoder == PHILIPS2)
+ pms_i2c_andor(dev, 0x8a, 0x0c, 0x7f, (colour & 1) << 7);
+ else if (dev->decoder == PHILIPS1)
+ pms_i2c_andor(dev, 0x42, 0x0c, 0x7, (colour & 1) << 7);
}
-static void pms_antigamma(short gamma)
+static void pms_antigamma(struct pms *dev, short gamma)
{
- if(decoder==PHILIPS2)
- pms_i2c_andor(0xB8, 0x00, 0x7F, (gamma&1)<<7);
- else if(decoder==PHILIPS1)
- pms_i2c_andor(0x42, 0x20, 0x7, (gamma&1)<<7);
+ if (dev->decoder == PHILIPS2)
+ pms_i2c_andor(dev, 0xb8, 0x00, 0x7f, (gamma & 1) << 7);
+ else if (dev->decoder == PHILIPS1)
+ pms_i2c_andor(dev, 0x42, 0x20, 0x7, (gamma & 1) << 7);
}
-static void pms_prefilter(short filter)
+static void pms_prefilter(struct pms *dev, short filter)
{
- if(decoder==PHILIPS2)
- pms_i2c_andor(0x8A, 0x06, 0xBF, (filter&1)<<6);
- else if(decoder==PHILIPS1)
- pms_i2c_andor(0x42, 0x06, 0xBF, (filter&1)<<6);
+ if (dev->decoder == PHILIPS2)
+ pms_i2c_andor(dev, 0x8a, 0x06, 0xbf, (filter & 1) << 6);
+ else if (dev->decoder == PHILIPS1)
+ pms_i2c_andor(dev, 0x42, 0x06, 0xbf, (filter & 1) << 6);
}
-static void pms_hfilter(short filter)
+static void pms_hfilter(struct pms *dev, short filter)
{
- if(decoder==PHILIPS2)
- pms_i2c_andor(0xB8, 0x04, 0x1F, (filter&7)<<5);
- else if(decoder==PHILIPS1)
- pms_i2c_andor(0x42, 0x24, 0x1F, (filter&7)<<5);
+ if (dev->decoder == PHILIPS2)
+ pms_i2c_andor(dev, 0xb8, 0x04, 0x1f, (filter & 7) << 5);
+ else if (dev->decoder == PHILIPS1)
+ pms_i2c_andor(dev, 0x42, 0x24, 0x1f, (filter & 7) << 5);
}
-static void pms_vfilter(short filter)
+static void pms_vfilter(struct pms *dev, short filter)
{
- if(decoder==PHILIPS2)
- pms_i2c_andor(0xB8, 0x08, 0x9F, (filter&3)<<5);
- else if(decoder==PHILIPS1)
- pms_i2c_andor(0x42, 0x28, 0x9F, (filter&3)<<5);
+ if (dev->decoder == PHILIPS2)
+ pms_i2c_andor(dev, 0xb8, 0x08, 0x9f, (filter & 3) << 5);
+ else if (dev->decoder == PHILIPS1)
+ pms_i2c_andor(dev, 0x42, 0x28, 0x9f, (filter & 3) << 5);
}
-static void pms_killcolour(short colour)
+static void pms_killcolour(struct pms *dev, short colour)
{
- if(decoder==PHILIPS2)
- {
- pms_i2c_andor(0x8A, 0x08, 0x07, (colour&0x1F)<<3);
- pms_i2c_andor(0x8A, 0x09, 0x07, (colour&0x1F)<<3);
- }
- else if(decoder==PHILIPS1)
- {
- pms_i2c_andor(0x42, 0x08, 0x07, (colour&0x1F)<<3);
- pms_i2c_andor(0x42, 0x09, 0x07, (colour&0x1F)<<3);
+ if (dev->decoder == PHILIPS2) {
+ pms_i2c_andor(dev, 0x8a, 0x08, 0x07, (colour & 0x1f) << 3);
+ pms_i2c_andor(dev, 0x8a, 0x09, 0x07, (colour & 0x1f) << 3);
+ } else if (dev->decoder == PHILIPS1) {
+ pms_i2c_andor(dev, 0x42, 0x08, 0x07, (colour & 0x1f) << 3);
+ pms_i2c_andor(dev, 0x42, 0x09, 0x07, (colour & 0x1f) << 3);
}
}
-static void pms_chromagain(short chroma)
+static void pms_chromagain(struct pms *dev, short chroma)
{
- if(decoder==PHILIPS2)
- {
- pms_i2c_write(0x8A, 0x11, chroma);
- }
- else if(decoder==PHILIPS1)
- {
- pms_i2c_write(0x42, 0x11, chroma);
- }
+ if (dev->decoder == PHILIPS2)
+ pms_i2c_write(dev, 0x8a, 0x11, chroma);
+ else if (dev->decoder == PHILIPS1)
+ pms_i2c_write(dev, 0x42, 0x11, chroma);
}
-static void pms_spacialcompl(short data)
+static void pms_spacialcompl(struct pms *dev, short data)
{
- mvv_write(0x3B, data);
+ mvv_write(dev, 0x3b, data);
}
-static void pms_spacialcomph(short data)
+static void pms_spacialcomph(struct pms *dev, short data)
{
- mvv_write(0x3A, data);
+ mvv_write(dev, 0x3a, data);
}
-static void pms_vstart(short start)
+static void pms_vstart(struct pms *dev, short start)
{
- mvv_write(0x16, start);
- mvv_write(0x17, (start>>8)&0x01);
+ mvv_write(dev, 0x16, start);
+ mvv_write(dev, 0x17, (start >> 8) & 0x01);
}
#endif
-static void pms_secamcross(short cross)
+static void pms_secamcross(struct pms *dev, short cross)
{
- if(decoder==PHILIPS2)
- pms_i2c_andor(0x8A, 0x0F, 0xDF, (cross&1)<<5);
- else if(decoder==PHILIPS1)
- pms_i2c_andor(0x42, 0x0F, 0xDF, (cross&1)<<5);
+ if (dev->decoder == PHILIPS2)
+ pms_i2c_andor(dev, 0x8a, 0x0f, 0xdf, (cross & 1) << 5);
+ else if (dev->decoder == PHILIPS1)
+ pms_i2c_andor(dev, 0x42, 0x0f, 0xdf, (cross & 1) << 5);
}
-static void pms_swsense(short sense)
+static void pms_swsense(struct pms *dev, short sense)
{
- if(decoder==PHILIPS2)
- {
- pms_i2c_write(0x8A, 0x0A, sense);
- pms_i2c_write(0x8A, 0x0B, sense);
- }
- else if(decoder==PHILIPS1)
- {
- pms_i2c_write(0x42, 0x0A, sense);
- pms_i2c_write(0x42, 0x0B, sense);
+ if (dev->decoder == PHILIPS2) {
+ pms_i2c_write(dev, 0x8a, 0x0a, sense);
+ pms_i2c_write(dev, 0x8a, 0x0b, sense);
+ } else if (dev->decoder == PHILIPS1) {
+ pms_i2c_write(dev, 0x42, 0x0a, sense);
+ pms_i2c_write(dev, 0x42, 0x0b, sense);
}
}
-static void pms_framerate(short frr)
+static void pms_framerate(struct pms *dev, short frr)
{
- int fps=(standard==1)?30:25;
- if(frr==0)
+ int fps = (dev->std & V4L2_STD_525_60) ? 30 : 25;
+
+ if (frr == 0)
return;
- fps=fps/frr;
- mvv_write(0x14,0x80|fps);
- mvv_write(0x15,1);
+ fps = fps/frr;
+ mvv_write(dev, 0x14, 0x80 | fps);
+ mvv_write(dev, 0x15, 1);
}
-static void pms_vert(u8 deciden, u8 decinum)
+static void pms_vert(struct pms *dev, u8 deciden, u8 decinum)
{
- mvv_write(0x1C, deciden); /* Denominator */
- mvv_write(0x1D, decinum); /* Numerator */
+ mvv_write(dev, 0x1c, deciden); /* Denominator */
+ mvv_write(dev, 0x1d, decinum); /* Numerator */
}
/*
* Turn 16bit ratios into best small ratio the chipset can grok
*/
-static void pms_vertdeci(unsigned short decinum, unsigned short deciden)
+static void pms_vertdeci(struct pms *dev, unsigned short decinum, unsigned short deciden)
{
- /* Knock it down by /5 once */
- if(decinum%5==0)
- {
- deciden/=5;
- decinum/=5;
+ /* Knock it down by / 5 once */
+ if (decinum % 5 == 0) {
+ deciden /= 5;
+ decinum /= 5;
}
/*
* 3's
*/
- while(decinum%3==0 && deciden%3==0)
- {
- deciden/=3;
- decinum/=3;
+ while (decinum % 3 == 0 && deciden % 3 == 0) {
+ deciden /= 3;
+ decinum /= 3;
}
/*
* 2's
*/
- while(decinum%2==0 && deciden%2==0)
- {
- decinum/=2;
- deciden/=2;
+ while (decinum % 2 == 0 && deciden % 2 == 0) {
+ decinum /= 2;
+ deciden /= 2;
}
/*
* Fudgyify
*/
- while(deciden>32)
- {
- deciden/=2;
- decinum=(decinum+1)/2;
+ while (deciden > 32) {
+ deciden /= 2;
+ decinum = (decinum + 1) / 2;
}
- if(deciden==32)
+ if (deciden == 32)
deciden--;
- pms_vert(deciden,decinum);
+ pms_vert(dev, deciden, decinum);
}
-static void pms_horzdeci(short decinum, short deciden)
+static void pms_horzdeci(struct pms *dev, short decinum, short deciden)
{
- if(decinum<=512)
- {
- if(decinum%5==0)
- {
- decinum/=5;
- deciden/=5;
+ if (decinum <= 512) {
+ if (decinum % 5 == 0) {
+ decinum /= 5;
+ deciden /= 5;
}
- }
- else
- {
- decinum=512;
- deciden=640; /* 768 would be ideal */
+ } else {
+ decinum = 512;
+ deciden = 640; /* 768 would be ideal */
}
- while(((decinum|deciden)&1)==0)
- {
- decinum>>=1;
- deciden>>=1;
+ while (((decinum | deciden) & 1) == 0) {
+ decinum >>= 1;
+ deciden >>= 1;
}
- while(deciden>32)
- {
- deciden>>=1;
- decinum=(decinum+1)>>1;
+ while (deciden > 32) {
+ deciden >>= 1;
+ decinum = (decinum + 1) >> 1;
}
- if(deciden==32)
+ if (deciden == 32)
deciden--;
- mvv_write(0x24, 0x80|deciden);
- mvv_write(0x25, decinum);
+ mvv_write(dev, 0x24, 0x80 | deciden);
+ mvv_write(dev, 0x25, decinum);
}
-static void pms_resolution(short width, short height)
+static void pms_resolution(struct pms *dev, short width, short height)
{
int fg_height;
- fg_height=height;
- if(fg_height>280)
- fg_height=280;
+ fg_height = height;
+ if (fg_height > 280)
+ fg_height = 280;
- mvv_write(0x18, fg_height);
- mvv_write(0x19, fg_height>>8);
+ mvv_write(dev, 0x18, fg_height);
+ mvv_write(dev, 0x19, fg_height >> 8);
- if(standard==1)
- {
- mvv_write(0x1A, 0xFC);
- mvv_write(0x1B, 0x00);
- if(height>fg_height)
- pms_vertdeci(240,240);
+ if (dev->std & V4L2_STD_525_60) {
+ mvv_write(dev, 0x1a, 0xfc);
+ mvv_write(dev, 0x1b, 0x00);
+ if (height > fg_height)
+ pms_vertdeci(dev, 240, 240);
else
- pms_vertdeci(fg_height,240);
- }
- else
- {
- mvv_write(0x1A, 0x1A);
- mvv_write(0x1B, 0x01);
- if(fg_height>256)
- pms_vertdeci(270,270);
+ pms_vertdeci(dev, fg_height, 240);
+ } else {
+ mvv_write(dev, 0x1a, 0x1a);
+ mvv_write(dev, 0x1b, 0x01);
+ if (fg_height > 256)
+ pms_vertdeci(dev, 270, 270);
else
- pms_vertdeci(fg_height, 270);
+ pms_vertdeci(dev, fg_height, 270);
}
- mvv_write(0x12,0);
- mvv_write(0x13, MVVMEMORYWIDTH);
- mvv_write(0x42, 0x00);
- mvv_write(0x43, 0x00);
- mvv_write(0x44, MVVMEMORYWIDTH);
+ mvv_write(dev, 0x12, 0);
+ mvv_write(dev, 0x13, MVVMEMORYWIDTH);
+ mvv_write(dev, 0x42, 0x00);
+ mvv_write(dev, 0x43, 0x00);
+ mvv_write(dev, 0x44, MVVMEMORYWIDTH);
- mvv_write(0x22, width+8);
- mvv_write(0x23, (width+8)>> 8);
+ mvv_write(dev, 0x22, width + 8);
+ mvv_write(dev, 0x23, (width + 8) >> 8);
- if(standard==1)
- pms_horzdeci(width,640);
+ if (dev->std & V4L2_STD_525_60)
+ pms_horzdeci(dev, width, 640);
else
- pms_horzdeci(width+8, 768);
+ pms_horzdeci(dev, width + 8, 768);
- mvv_write(0x30, mvv_read(0x30)&0xFE);
- mvv_write(0x08, mvv_read(0x08)|0x01);
- mvv_write(0x01, mvv_read(0x01)&0xFD);
- mvv_write(0x32, 0x00);
- mvv_write(0x33, MVVMEMORYWIDTH);
+ mvv_write(dev, 0x30, mvv_read(dev, 0x30) & 0xfe);
+ mvv_write(dev, 0x08, mvv_read(dev, 0x08) | 0x01);
+ mvv_write(dev, 0x01, mvv_read(dev, 0x01) & 0xfd);
+ mvv_write(dev, 0x32, 0x00);
+ mvv_write(dev, 0x33, MVVMEMORYWIDTH);
}
@@ -621,52 +616,49 @@
* Set Input
*/
-static void pms_vcrinput(short input)
+static void pms_vcrinput(struct pms *dev, short input)
{
- if(decoder==PHILIPS2)
- pms_i2c_andor(0x8A,0x0D,0x7F,(input&1)<<7);
- else if(decoder==PHILIPS1)
- pms_i2c_andor(0x42,0x0D,0x7F,(input&1)<<7);
+ if (dev->decoder == PHILIPS2)
+ pms_i2c_andor(dev, 0x8a, 0x0d, 0x7f, (input & 1) << 7);
+ else if (dev->decoder == PHILIPS1)
+ pms_i2c_andor(dev, 0x42, 0x0d, 0x7f, (input & 1) << 7);
}
-static int pms_capture(struct pms_device *dev, char __user *buf, int rgb555, int count)
+static int pms_capture(struct pms *dev, char __user *buf, int rgb555, int count)
{
int y;
- int dw = 2*dev->width;
-
- char tmp[dw+32]; /* using a temp buffer is faster than direct */
+ int dw = 2 * dev->width;
+ char tmp[dw + 32]; /* using a temp buffer is faster than direct */
int cnt = 0;
- int len=0;
+ int len = 0;
unsigned char r8 = 0x5; /* value for reg8 */
if (rgb555)
r8 |= 0x20; /* else use untranslated rgb = 565 */
- mvv_write(0x08,r8); /* capture rgb555/565, init DRAM, PC enable */
+ mvv_write(dev, 0x08, r8); /* capture rgb555/565, init DRAM, PC enable */
/* printf("%d %d %d %d %d %x %x\n",width,height,voff,nom,den,mvv_buf); */
- for (y = 0; y < dev->height; y++ )
- {
- writeb(0, mem); /* synchronisiert neue Zeile */
+ for (y = 0; y < dev->height; y++) {
+ writeb(0, dev->mem); /* synchronisiert neue Zeile */
/*
* This is in truth a fifo, be very careful as if you
* forgot this odd things will occur 8)
*/
- memcpy_fromio(tmp, mem, dw+32); /* discard 16 word */
+ memcpy_fromio(tmp, dev->mem, dw + 32); /* discard 16 word */
cnt -= dev->height;
- while (cnt <= 0)
- {
+ while (cnt <= 0) {
/*
* Don't copy too far
*/
- int dt=dw;
- if(dt+len>count)
- dt=count-len;
+ int dt = dw;
+ if (dt + len > count)
+ dt = count - len;
cnt += dev->height;
- if (copy_to_user(buf, tmp+32, dt))
+ if (copy_to_user(buf, tmp + 32, dt))
return len ? len : -EFAULT;
buf += dt;
len += dt;
@@ -680,221 +672,278 @@
* Video4linux interfacing
*/
-static long pms_do_ioctl(struct file *file, unsigned int cmd, void *arg)
+static int pms_querycap(struct file *file, void *priv,
+ struct v4l2_capability *vcap)
{
- struct video_device *dev = video_devdata(file);
- struct pms_device *pd=(struct pms_device *)dev;
+ struct pms *dev = video_drvdata(file);
- switch(cmd)
- {
- case VIDIOCGCAP:
- {
- struct video_capability *b = arg;
- strcpy(b->name, "Mediavision PMS");
- b->type = VID_TYPE_CAPTURE|VID_TYPE_SCALES;
- b->channels = 4;
- b->audios = 0;
- b->maxwidth = 640;
- b->maxheight = 480;
- b->minwidth = 16;
- b->minheight = 16;
- return 0;
- }
- case VIDIOCGCHAN:
- {
- struct video_channel *v = arg;
- if(v->channel<0 || v->channel>3)
- return -EINVAL;
- v->flags=0;
- v->tuners=1;
- /* Good question.. its composite or SVHS so.. */
- v->type = VIDEO_TYPE_CAMERA;
- switch(v->channel)
- {
- case 0:
- strcpy(v->name, "Composite");break;
- case 1:
- strcpy(v->name, "SVideo");break;
- case 2:
- strcpy(v->name, "Composite(VCR)");break;
- case 3:
- strcpy(v->name, "SVideo(VCR)");break;
- }
- return 0;
- }
- case VIDIOCSCHAN:
- {
- struct video_channel *v = arg;
- if(v->channel<0 || v->channel>3)
- return -EINVAL;
- mutex_lock(&pd->lock);
- pms_videosource(v->channel&1);
- pms_vcrinput(v->channel>>1);
- mutex_unlock(&pd->lock);
- return 0;
- }
- case VIDIOCGTUNER:
- {
- struct video_tuner *v = arg;
- if(v->tuner)
- return -EINVAL;
- strcpy(v->name, "Format");
- v->rangelow=0;
- v->rangehigh=0;
- v->flags= VIDEO_TUNER_PAL|VIDEO_TUNER_NTSC|VIDEO_TUNER_SECAM;
- switch(standard)
- {
- case 0:
- v->mode = VIDEO_MODE_AUTO;
- break;
- case 1:
- v->mode = VIDEO_MODE_NTSC;
- break;
- case 2:
- v->mode = VIDEO_MODE_PAL;
- break;
- case 3:
- v->mode = VIDEO_MODE_SECAM;
- break;
- }
- return 0;
- }
- case VIDIOCSTUNER:
- {
- struct video_tuner *v = arg;
- if(v->tuner)
- return -EINVAL;
- mutex_lock(&pd->lock);
- switch(v->mode)
- {
- case VIDEO_MODE_AUTO:
- pms_framerate(25);
- pms_secamcross(0);
- pms_format(0);
- break;
- case VIDEO_MODE_NTSC:
- pms_framerate(30);
- pms_secamcross(0);
- pms_format(1);
- break;
- case VIDEO_MODE_PAL:
- pms_framerate(25);
- pms_secamcross(0);
- pms_format(2);
- break;
- case VIDEO_MODE_SECAM:
- pms_framerate(25);
- pms_secamcross(1);
- pms_format(2);
- break;
- default:
- mutex_unlock(&pd->lock);
- return -EINVAL;
- }
- mutex_unlock(&pd->lock);
- return 0;
- }
- case VIDIOCGPICT:
- {
- struct video_picture *p = arg;
- *p = pd->picture;
- return 0;
- }
- case VIDIOCSPICT:
- {
- struct video_picture *p = arg;
- if(!((p->palette==VIDEO_PALETTE_RGB565 && p->depth==16)
- ||(p->palette==VIDEO_PALETTE_RGB555 && p->depth==15)))
- return -EINVAL;
- pd->picture= *p;
-
- /*
- * Now load the card.
- */
-
- mutex_lock(&pd->lock);
- pms_brightness(p->brightness>>8);
- pms_hue(p->hue>>8);
- pms_colour(p->colour>>8);
- pms_contrast(p->contrast>>8);
- mutex_unlock(&pd->lock);
- return 0;
- }
- case VIDIOCSWIN:
- {
- struct video_window *vw = arg;
- if(vw->flags)
- return -EINVAL;
- if(vw->clipcount)
- return -EINVAL;
- if(vw->height<16||vw->height>480)
- return -EINVAL;
- if(vw->width<16||vw->width>640)
- return -EINVAL;
- pd->width=vw->width;
- pd->height=vw->height;
- mutex_lock(&pd->lock);
- pms_resolution(pd->width, pd->height);
- mutex_unlock(&pd->lock); /* Ok we figured out what to use from our wide choice */
- return 0;
- }
- case VIDIOCGWIN:
- {
- struct video_window *vw = arg;
- memset(vw,0,sizeof(*vw));
- vw->width=pd->width;
- vw->height=pd->height;
- return 0;
- }
- case VIDIOCKEY:
- return 0;
- case VIDIOCCAPTURE:
- case VIDIOCGFBUF:
- case VIDIOCSFBUF:
- case VIDIOCGFREQ:
- case VIDIOCSFREQ:
- case VIDIOCGAUDIO:
- case VIDIOCSAUDIO:
- return -EINVAL;
- default:
- return -ENOIOCTLCMD;
- }
+ strlcpy(vcap->driver, dev->v4l2_dev.name, sizeof(vcap->driver));
+ strlcpy(vcap->card, "Mediavision PMS", sizeof(vcap->card));
+ strlcpy(vcap->bus_info, "ISA", sizeof(vcap->bus_info));
+ vcap->version = KERNEL_VERSION(0, 0, 3);
+ vcap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE;
return 0;
}
-static long pms_ioctl(struct file *file,
- unsigned int cmd, unsigned long arg)
+static int pms_enum_input(struct file *file, void *fh, struct v4l2_input *vin)
{
- return video_usercopy(file, cmd, arg, pms_do_ioctl);
+ static const char *inputs[4] = {
+ "Composite",
+ "S-Video",
+ "Composite (VCR)",
+ "S-Video (VCR)"
+ };
+
+ if (vin->index > 3)
+ return -EINVAL;
+ strlcpy(vin->name, inputs[vin->index], sizeof(vin->name));
+ vin->type = V4L2_INPUT_TYPE_CAMERA;
+ vin->audioset = 0;
+ vin->tuner = 0;
+ vin->std = V4L2_STD_ALL;
+ vin->status = 0;
+ return 0;
+}
+
+static int pms_g_input(struct file *file, void *fh, unsigned int *inp)
+{
+ struct pms *dev = video_drvdata(file);
+
+ *inp = dev->input;
+ return 0;
+}
+
+static int pms_s_input(struct file *file, void *fh, unsigned int inp)
+{
+ struct pms *dev = video_drvdata(file);
+
+ if (inp > 3)
+ return -EINVAL;
+
+ mutex_lock(&dev->lock);
+ dev->input = inp;
+ pms_videosource(dev, inp & 1);
+ pms_vcrinput(dev, inp >> 1);
+ mutex_unlock(&dev->lock);
+ return 0;
+}
+
+static int pms_g_std(struct file *file, void *fh, v4l2_std_id *std)
+{
+ struct pms *dev = video_drvdata(file);
+
+ *std = dev->std;
+ return 0;
+}
+
+static int pms_s_std(struct file *file, void *fh, v4l2_std_id *std)
+{
+ struct pms *dev = video_drvdata(file);
+ int ret = 0;
+
+ dev->std = *std;
+ mutex_lock(&dev->lock);
+ if (dev->std & V4L2_STD_NTSC) {
+ pms_framerate(dev, 30);
+ pms_secamcross(dev, 0);
+ pms_format(dev, 1);
+ } else if (dev->std & V4L2_STD_PAL) {
+ pms_framerate(dev, 25);
+ pms_secamcross(dev, 0);
+ pms_format(dev, 2);
+ } else if (dev->std & V4L2_STD_SECAM) {
+ pms_framerate(dev, 25);
+ pms_secamcross(dev, 1);
+ pms_format(dev, 2);
+ } else {
+ ret = -EINVAL;
+ }
+ /*
+ switch (v->mode) {
+ case VIDEO_MODE_AUTO:
+ pms_framerate(dev, 25);
+ pms_secamcross(dev, 0);
+ pms_format(dev, 0);
+ break;
+ }*/
+ mutex_unlock(&dev->lock);
+ return 0;
+}
+
+static int pms_queryctrl(struct file *file, void *priv,
+ struct v4l2_queryctrl *qc)
+{
+ switch (qc->id) {
+ case V4L2_CID_BRIGHTNESS:
+ return v4l2_ctrl_query_fill(qc, 0, 255, 1, 139);
+ case V4L2_CID_CONTRAST:
+ return v4l2_ctrl_query_fill(qc, 0, 255, 1, 70);
+ case V4L2_CID_SATURATION:
+ return v4l2_ctrl_query_fill(qc, 0, 255, 1, 64);
+ case V4L2_CID_HUE:
+ return v4l2_ctrl_query_fill(qc, 0, 255, 1, 0);
+ }
+ return -EINVAL;
+}
+
+static int pms_g_ctrl(struct file *file, void *priv,
+ struct v4l2_control *ctrl)
+{
+ struct pms *dev = video_drvdata(file);
+ int ret = 0;
+
+ switch (ctrl->id) {
+ case V4L2_CID_BRIGHTNESS:
+ ctrl->value = dev->brightness;
+ break;
+ case V4L2_CID_CONTRAST:
+ ctrl->value = dev->contrast;
+ break;
+ case V4L2_CID_SATURATION:
+ ctrl->value = dev->saturation;
+ break;
+ case V4L2_CID_HUE:
+ ctrl->value = dev->hue;
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+ return ret;
+}
+
+static int pms_s_ctrl(struct file *file, void *priv,
+ struct v4l2_control *ctrl)
+{
+ struct pms *dev = video_drvdata(file);
+ int ret = 0;
+
+ mutex_lock(&dev->lock);
+ switch (ctrl->id) {
+ case V4L2_CID_BRIGHTNESS:
+ dev->brightness = ctrl->value;
+ pms_brightness(dev, dev->brightness);
+ break;
+ case V4L2_CID_CONTRAST:
+ dev->contrast = ctrl->value;
+ pms_contrast(dev, dev->contrast);
+ break;
+ case V4L2_CID_SATURATION:
+ dev->saturation = ctrl->value;
+ pms_saturation(dev, dev->saturation);
+ break;
+ case V4L2_CID_HUE:
+ dev->hue = ctrl->value;
+ pms_hue(dev, dev->hue);
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+ mutex_unlock(&dev->lock);
+ return ret;
+}
+
+static int pms_g_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *fmt)
+{
+ struct pms *dev = video_drvdata(file);
+ struct v4l2_pix_format *pix = &fmt->fmt.pix;
+
+ pix->width = dev->width;
+ pix->height = dev->height;
+ pix->pixelformat = dev->width == 15 ?
+ V4L2_PIX_FMT_RGB555 : V4L2_PIX_FMT_RGB565;
+ pix->field = V4L2_FIELD_NONE;
+ pix->bytesperline = 2 * dev->width;
+ pix->sizeimage = 2 * dev->width * dev->height;
+ /* Just a guess */
+ pix->colorspace = V4L2_COLORSPACE_SRGB;
+ return 0;
+}
+
+static int pms_try_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *fmt)
+{
+ struct v4l2_pix_format *pix = &fmt->fmt.pix;
+
+ if (pix->height < 16 || pix->height > 480)
+ return -EINVAL;
+ if (pix->width < 16 || pix->width > 640)
+ return -EINVAL;
+ if (pix->pixelformat != V4L2_PIX_FMT_RGB555 &&
+ pix->pixelformat != V4L2_PIX_FMT_RGB565)
+ return -EINVAL;
+ pix->field = V4L2_FIELD_NONE;
+ pix->bytesperline = 2 * pix->width;
+ pix->sizeimage = 2 * pix->width * pix->height;
+ /* Just a guess */
+ pix->colorspace = V4L2_COLORSPACE_SRGB;
+ return 0;
+}
+
+static int pms_s_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *fmt)
+{
+ struct pms *dev = video_drvdata(file);
+ struct v4l2_pix_format *pix = &fmt->fmt.pix;
+ int ret = pms_try_fmt_vid_cap(file, fh, fmt);
+
+ if (ret)
+ return ret;
+ mutex_lock(&dev->lock);
+ dev->width = pix->width;
+ dev->height = pix->height;
+ dev->depth = (pix->pixelformat == V4L2_PIX_FMT_RGB555) ? 15 : 16;
+ pms_resolution(dev, dev->width, dev->height);
+ /* Ok we figured out what to use from our wide choice */
+ mutex_unlock(&dev->lock);
+ return 0;
+}
+
+static int pms_enum_fmt_vid_cap(struct file *file, void *fh, struct v4l2_fmtdesc *fmt)
+{
+ static struct v4l2_fmtdesc formats[] = {
+ { 0, 0, 0,
+ "RGB 5:5:5", V4L2_PIX_FMT_RGB555,
+ { 0, 0, 0, 0 }
+ },
+ { 0, 0, 0,
+ "RGB 5:6:5", V4L2_PIX_FMT_RGB565,
+ { 0, 0, 0, 0 }
+ },
+ };
+ enum v4l2_buf_type type = fmt->type;
+
+ if (fmt->index > 1)
+ return -EINVAL;
+
+ *fmt = formats[fmt->index];
+ fmt->type = type;
+ return 0;
}
static ssize_t pms_read(struct file *file, char __user *buf,
size_t count, loff_t *ppos)
{
- struct video_device *v = video_devdata(file);
- struct pms_device *pd=(struct pms_device *)v;
+ struct pms *dev = video_drvdata(file);
int len;
- mutex_lock(&pd->lock);
- len=pms_capture(pd, buf, (pd->picture.depth==16)?0:1,count);
- mutex_unlock(&pd->lock);
+ mutex_lock(&dev->lock);
+ len = pms_capture(dev, buf, (dev->depth == 15), count);
+ mutex_unlock(&dev->lock);
return len;
}
static int pms_exclusive_open(struct file *file)
{
- struct video_device *v = video_devdata(file);
- struct pms_device *pd = (struct pms_device *)v;
+ struct pms *dev = video_drvdata(file);
- return test_and_set_bit(0, &pd->in_use) ? -EBUSY : 0;
+ return test_and_set_bit(0, &dev->in_use) ? -EBUSY : 0;
}
static int pms_exclusive_release(struct file *file)
{
- struct video_device *v = video_devdata(file);
- struct pms_device *pd = (struct pms_device *)v;
+ struct pms *dev = video_drvdata(file);
- clear_bit(0, &pd->in_use);
+ clear_bit(0, &dev->in_use);
return 0;
}
@@ -902,78 +951,81 @@
.owner = THIS_MODULE,
.open = pms_exclusive_open,
.release = pms_exclusive_release,
- .ioctl = pms_ioctl,
+ .ioctl = video_ioctl2,
.read = pms_read,
};
-static struct video_device pms_template=
-{
- .name = "Mediavision PMS",
- .fops = &pms_fops,
- .release = video_device_release_empty,
+static const struct v4l2_ioctl_ops pms_ioctl_ops = {
+ .vidioc_querycap = pms_querycap,
+ .vidioc_g_input = pms_g_input,
+ .vidioc_s_input = pms_s_input,
+ .vidioc_enum_input = pms_enum_input,
+ .vidioc_g_std = pms_g_std,
+ .vidioc_s_std = pms_s_std,
+ .vidioc_queryctrl = pms_queryctrl,
+ .vidioc_g_ctrl = pms_g_ctrl,
+ .vidioc_s_ctrl = pms_s_ctrl,
+ .vidioc_enum_fmt_vid_cap = pms_enum_fmt_vid_cap,
+ .vidioc_g_fmt_vid_cap = pms_g_fmt_vid_cap,
+ .vidioc_s_fmt_vid_cap = pms_s_fmt_vid_cap,
+ .vidioc_try_fmt_vid_cap = pms_try_fmt_vid_cap,
};
-static struct pms_device pms_device;
-
-
/*
* Probe for and initialise the Mediavision PMS
*/
-static int init_mediavision(void)
+static int init_mediavision(struct pms *dev)
{
int id;
int idec, decst;
int i;
-
- unsigned char i2c_defs[]={
- 0x4C,0x30,0x00,0xE8,
- 0xB6,0xE2,0x00,0x00,
- 0xFF,0xFF,0x00,0x00,
- 0x00,0x00,0x78,0x98,
- 0x00,0x00,0x00,0x00,
- 0x34,0x0A,0xF4,0xCE,
- 0xE4
+ static const unsigned char i2c_defs[] = {
+ 0x4c, 0x30, 0x00, 0xe8,
+ 0xb6, 0xe2, 0x00, 0x00,
+ 0xff, 0xff, 0x00, 0x00,
+ 0x00, 0x00, 0x78, 0x98,
+ 0x00, 0x00, 0x00, 0x00,
+ 0x34, 0x0a, 0xf4, 0xce,
+ 0xe4
};
- mem = ioremap(mem_base, 0x800);
- if (!mem)
+ dev->mem = ioremap(mem_base, 0x800);
+ if (!dev->mem)
return -ENOMEM;
- if (!request_region(0x9A01, 1, "Mediavision PMS config"))
- {
- printk(KERN_WARNING "mediavision: unable to detect: 0x9A01 in use.\n");
- iounmap(mem);
+ if (!request_region(0x9a01, 1, "Mediavision PMS config")) {
+ printk(KERN_WARNING "mediavision: unable to detect: 0x9a01 in use.\n");
+ iounmap(dev->mem);
return -EBUSY;
}
- if (!request_region(io_port, 3, "Mediavision PMS"))
- {
- printk(KERN_WARNING "mediavision: I/O port %d in use.\n", io_port);
- release_region(0x9A01, 1);
- iounmap(mem);
+ if (!request_region(dev->io, 3, "Mediavision PMS")) {
+ printk(KERN_WARNING "mediavision: I/O port %d in use.\n", dev->io);
+ release_region(0x9a01, 1);
+ iounmap(dev->mem);
return -EBUSY;
}
- outb(0xB8, 0x9A01); /* Unlock */
- outb(io_port>>4, 0x9A01); /* Set IO port */
+ outb(0xb8, 0x9a01); /* Unlock */
+ outb(dev->io >> 4, 0x9a01); /* Set IO port */
- id=mvv_read(3);
- decst=pms_i2c_stat(0x43);
+ id = mvv_read(dev, 3);
+ decst = pms_i2c_stat(dev, 0x43);
- if(decst!=-1)
- idec=2;
- else if(pms_i2c_stat(0xb9)!=-1)
- idec=3;
- else if(pms_i2c_stat(0x8b)!=-1)
- idec=1;
+ if (decst != -1)
+ idec = 2;
+ else if (pms_i2c_stat(dev, 0xb9) != -1)
+ idec = 3;
+ else if (pms_i2c_stat(dev, 0x8b) != -1)
+ idec = 1;
else
- idec=0;
+ idec = 0;
printk(KERN_INFO "PMS type is %d\n", idec);
- if(idec == 0) {
- release_region(io_port, 3);
- release_region(0x9A01, 1);
- iounmap(mem);
+ if (idec == 0) {
+ release_region(dev->io, 3);
+ release_region(0x9a01, 1);
+ iounmap(dev->mem);
return -ENODEV;
}
@@ -981,51 +1033,50 @@
* Ok we have a PMS of some sort
*/
- mvv_write(0x04, mem_base>>12); /* Set the memory area */
+ mvv_write(dev, 0x04, mem_base >> 12); /* Set the memory area */
/* Ok now load the defaults */
- for(i=0;i<0x19;i++)
- {
- if(i2c_defs[i]==0xFF)
- pms_i2c_andor(0x8A, i, 0x07,0x00);
+ for (i = 0; i < 0x19; i++) {
+ if (i2c_defs[i] == 0xff)
+ pms_i2c_andor(dev, 0x8a, i, 0x07, 0x00);
else
- pms_i2c_write(0x8A, i, i2c_defs[i]);
+ pms_i2c_write(dev, 0x8a, i, i2c_defs[i]);
}
- pms_i2c_write(0xB8,0x00,0x12);
- pms_i2c_write(0xB8,0x04,0x00);
- pms_i2c_write(0xB8,0x07,0x00);
- pms_i2c_write(0xB8,0x08,0x00);
- pms_i2c_write(0xB8,0x09,0xFF);
- pms_i2c_write(0xB8,0x0A,0x00);
- pms_i2c_write(0xB8,0x0B,0x10);
- pms_i2c_write(0xB8,0x10,0x03);
+ pms_i2c_write(dev, 0xb8, 0x00, 0x12);
+ pms_i2c_write(dev, 0xb8, 0x04, 0x00);
+ pms_i2c_write(dev, 0xb8, 0x07, 0x00);
+ pms_i2c_write(dev, 0xb8, 0x08, 0x00);
+ pms_i2c_write(dev, 0xb8, 0x09, 0xff);
+ pms_i2c_write(dev, 0xb8, 0x0a, 0x00);
+ pms_i2c_write(dev, 0xb8, 0x0b, 0x10);
+ pms_i2c_write(dev, 0xb8, 0x10, 0x03);
- mvv_write(0x01, 0x00);
- mvv_write(0x05, 0xA0);
- mvv_write(0x08, 0x25);
- mvv_write(0x09, 0x00);
- mvv_write(0x0A, 0x20|MVVMEMORYWIDTH);
+ mvv_write(dev, 0x01, 0x00);
+ mvv_write(dev, 0x05, 0xa0);
+ mvv_write(dev, 0x08, 0x25);
+ mvv_write(dev, 0x09, 0x00);
+ mvv_write(dev, 0x0a, 0x20 | MVVMEMORYWIDTH);
- mvv_write(0x10, 0x02);
- mvv_write(0x1E, 0x0C);
- mvv_write(0x1F, 0x03);
- mvv_write(0x26, 0x06);
+ mvv_write(dev, 0x10, 0x02);
+ mvv_write(dev, 0x1e, 0x0c);
+ mvv_write(dev, 0x1f, 0x03);
+ mvv_write(dev, 0x26, 0x06);
- mvv_write(0x2B, 0x00);
- mvv_write(0x2C, 0x20);
- mvv_write(0x2D, 0x00);
- mvv_write(0x2F, 0x70);
- mvv_write(0x32, 0x00);
- mvv_write(0x33, MVVMEMORYWIDTH);
- mvv_write(0x34, 0x00);
- mvv_write(0x35, 0x00);
- mvv_write(0x3A, 0x80);
- mvv_write(0x3B, 0x10);
- mvv_write(0x20, 0x00);
- mvv_write(0x21, 0x00);
- mvv_write(0x30, 0x22);
+ mvv_write(dev, 0x2b, 0x00);
+ mvv_write(dev, 0x2c, 0x20);
+ mvv_write(dev, 0x2d, 0x00);
+ mvv_write(dev, 0x2f, 0x70);
+ mvv_write(dev, 0x32, 0x00);
+ mvv_write(dev, 0x33, MVVMEMORYWIDTH);
+ mvv_write(dev, 0x34, 0x00);
+ mvv_write(dev, 0x35, 0x00);
+ mvv_write(dev, 0x3a, 0x80);
+ mvv_write(dev, 0x3b, 0x10);
+ mvv_write(dev, 0x20, 0x00);
+ mvv_write(dev, 0x21, 0x00);
+ mvv_write(dev, 0x30, 0x22);
return 0;
}
@@ -1038,53 +1089,77 @@
module_param(enable, int, 0);
#endif
-static int __init init_pms_cards(void)
+static int __init pms_init(void)
{
- printk(KERN_INFO "Mediavision Pro Movie Studio driver 0.02\n");
+ struct pms *dev = &pms_card;
+ struct v4l2_device *v4l2_dev = &dev->v4l2_dev;
+ int res;
+
+ strlcpy(v4l2_dev->name, "pms", sizeof(v4l2_dev->name));
+
+ v4l2_info(v4l2_dev, "Mediavision Pro Movie Studio driver 0.03\n");
#ifndef MODULE
if (!enable) {
- printk(KERN_INFO "PMS: not enabled, use pms.enable=1 to "
- "probe\n");
+ v4l2_err(v4l2_dev,
+ "PMS: not enabled, use pms.enable=1 to probe\n");
return -ENODEV;
}
#endif
- data_port = io_port +1;
+ dev->decoder = PHILIPS2;
+ dev->io = io_port;
+ dev->data = io_port + 1;
- if(init_mediavision())
- {
- printk(KERN_INFO "Board not found.\n");
+ if (init_mediavision(dev)) {
+ v4l2_err(v4l2_dev, "Board not found.\n");
return -ENODEV;
}
- memcpy(&pms_device, &pms_template, sizeof(pms_template));
- mutex_init(&pms_device.lock);
- pms_device.height=240;
- pms_device.width=320;
- pms_swsense(75);
- pms_resolution(320,240);
- return video_register_device((struct video_device *)&pms_device, VFL_TYPE_GRABBER, video_nr);
+
+ res = v4l2_device_register(NULL, v4l2_dev);
+ if (res < 0) {
+ v4l2_err(v4l2_dev, "Could not register v4l2_device\n");
+ return res;
+ }
+
+ strlcpy(dev->vdev.name, v4l2_dev->name, sizeof(dev->vdev.name));
+ dev->vdev.v4l2_dev = v4l2_dev;
+ dev->vdev.fops = &pms_fops;
+ dev->vdev.ioctl_ops = &pms_ioctl_ops;
+ dev->vdev.release = video_device_release_empty;
+ video_set_drvdata(&dev->vdev, dev);
+ mutex_init(&dev->lock);
+ dev->std = V4L2_STD_NTSC_M;
+ dev->height = 240;
+ dev->width = 320;
+ dev->depth = 15;
+ dev->brightness = 139;
+ dev->contrast = 70;
+ dev->hue = 0;
+ dev->saturation = 64;
+ pms_swsense(dev, 75);
+ pms_resolution(dev, 320, 240);
+ pms_videosource(dev, 0);
+ pms_vcrinput(dev, 0);
+ if (video_register_device(&dev->vdev, VFL_TYPE_GRABBER, video_nr) < 0) {
+ v4l2_device_unregister(&dev->v4l2_dev);
+ release_region(dev->io, 3);
+ release_region(0x9a01, 1);
+ iounmap(dev->mem);
+ return -EINVAL;
+ }
+ return 0;
}
-module_param(io_port, int, 0);
-module_param(mem_base, int, 0);
-module_param(video_nr, int, 0);
-MODULE_LICENSE("GPL");
-
-
-static void __exit shutdown_mediavision(void)
+static void __exit pms_exit(void)
{
- release_region(io_port,3);
- release_region(0x9A01, 1);
+ struct pms *dev = &pms_card;
+
+ video_unregister_device(&dev->vdev);
+ release_region(dev->io, 3);
+ release_region(0x9a01, 1);
+ iounmap(dev->mem);
}
-static void __exit cleanup_pms_module(void)
-{
- shutdown_mediavision();
- video_unregister_device((struct video_device *)&pms_device);
- iounmap(mem);
-}
-
-module_init(init_pms_cards);
-module_exit(cleanup_pms_module);
-
+module_init(pms_init);
+module_exit(pms_exit);
diff --git a/drivers/media/video/pvrusb2/pvrusb2-debugifc.c b/drivers/media/video/pvrusb2/pvrusb2-debugifc.c
index fbe3856..ae97766 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-debugifc.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-debugifc.c
@@ -142,6 +142,9 @@
{
int bcnt = 0;
int ccnt;
+ ccnt = scnprintf(buf, acnt, "Driver hardware description: %s\n",
+ pvr2_hdw_get_desc(hdw));
+ bcnt += ccnt; acnt -= ccnt; buf += ccnt;
ccnt = scnprintf(buf,acnt,"Driver state info:\n");
bcnt += ccnt; acnt -= ccnt; buf += ccnt;
ccnt = pvr2_hdw_state_report(hdw,buf,acnt);
@@ -249,11 +252,15 @@
scnt = debugifc_isolate_word(buf,count,&wptr,&wlen);
if (scnt && wptr) {
count -= scnt; buf += scnt;
- if (debugifc_match_keyword(wptr,wlen,"prom")) {
- pvr2_hdw_cpufw_set_enabled(hdw,!0,!0);
- } else if (debugifc_match_keyword(wptr,wlen,
- "ram")) {
- pvr2_hdw_cpufw_set_enabled(hdw,0,!0);
+ if (debugifc_match_keyword(wptr, wlen,
+ "prom")) {
+ pvr2_hdw_cpufw_set_enabled(hdw, 2, !0);
+ } else if (debugifc_match_keyword(wptr, wlen,
+ "ram8k")) {
+ pvr2_hdw_cpufw_set_enabled(hdw, 0, !0);
+ } else if (debugifc_match_keyword(wptr, wlen,
+ "ram16k")) {
+ pvr2_hdw_cpufw_set_enabled(hdw, 1, !0);
} else {
return -EINVAL;
}
diff --git a/drivers/media/video/pvrusb2/pvrusb2-devattr.c b/drivers/media/video/pvrusb2/pvrusb2-devattr.c
index e4d7c13..6bc16c1 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-devattr.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-devattr.c
@@ -58,7 +58,7 @@
};
static const struct pvr2_device_desc pvr2_device_29xxx = {
- .description = "WinTV PVR USB2 Model Category 29xxx",
+ .description = "WinTV PVR USB2 Model 29xxx",
.shortname = "29xxx",
.client_table.lst = pvr2_cli_29xxx,
.client_table.cnt = ARRAY_SIZE(pvr2_cli_29xxx),
@@ -91,7 +91,7 @@
};
static const struct pvr2_device_desc pvr2_device_24xxx = {
- .description = "WinTV PVR USB2 Model Category 24xxx",
+ .description = "WinTV PVR USB2 Model 24xxx",
.shortname = "24xxx",
.client_table.lst = pvr2_cli_24xxx,
.client_table.cnt = ARRAY_SIZE(pvr2_cli_24xxx),
@@ -340,7 +340,7 @@
};
static const struct pvr2_device_desc pvr2_device_73xxx = {
- .description = "WinTV HVR-1900 Model Category 73xxx",
+ .description = "WinTV HVR-1900 Model 73xxx",
.shortname = "73xxx",
.client_table.lst = pvr2_cli_73xxx,
.client_table.cnt = ARRAY_SIZE(pvr2_cli_73xxx),
@@ -351,6 +351,7 @@
.flag_has_analogtuner = !0,
.flag_has_composite = !0,
.flag_has_svideo = !0,
+ .flag_fx2_16kb = !0,
.signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE,
.digital_control_scheme = PVR2_DIGITAL_SCHEME_HAUPPAUGE,
.led_scheme = PVR2_LED_SCHEME_HAUPPAUGE,
@@ -445,7 +446,7 @@
};
static const struct pvr2_device_desc pvr2_device_750xx = {
- .description = "WinTV HVR-1950 Model Category 750xx",
+ .description = "WinTV HVR-1950 Model 750xx",
.shortname = "750xx",
.client_table.lst = pvr2_cli_73xxx,
.client_table.cnt = ARRAY_SIZE(pvr2_cli_73xxx),
@@ -456,6 +457,7 @@
.flag_has_analogtuner = !0,
.flag_has_composite = !0,
.flag_has_svideo = !0,
+ .flag_fx2_16kb = !0,
.signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE,
.digital_control_scheme = PVR2_DIGITAL_SCHEME_HAUPPAUGE,
.default_std_mask = V4L2_STD_NTSC_M,
@@ -467,7 +469,7 @@
};
static const struct pvr2_device_desc pvr2_device_751xx = {
- .description = "WinTV HVR-1950 Model Category 751xx",
+ .description = "WinTV HVR-1950 Model 751xx",
.shortname = "751xx",
.client_table.lst = pvr2_cli_73xxx,
.client_table.cnt = ARRAY_SIZE(pvr2_cli_73xxx),
@@ -478,6 +480,7 @@
.flag_has_analogtuner = !0,
.flag_has_composite = !0,
.flag_has_svideo = !0,
+ .flag_fx2_16kb = !0,
.signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE,
.digital_control_scheme = PVR2_DIGITAL_SCHEME_HAUPPAUGE,
.default_std_mask = V4L2_STD_NTSC_M,
diff --git a/drivers/media/video/pvrusb2/pvrusb2-devattr.h b/drivers/media/video/pvrusb2/pvrusb2-devattr.h
index ea04ecf..e5b9594 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-devattr.h
+++ b/drivers/media/video/pvrusb2/pvrusb2-devattr.h
@@ -176,6 +176,7 @@
unsigned int flag_has_analogtuner:1; /* Has analog tuner */
unsigned int flag_has_composite:1; /* Has composite input */
unsigned int flag_has_svideo:1; /* Has s-video input */
+ unsigned int flag_fx2_16kb:1; /* 16KB FX2 firmware OK here */
};
extern struct usb_device_id pvr2_device_table[];
diff --git a/drivers/media/video/pvrusb2/pvrusb2-encoder.c b/drivers/media/video/pvrusb2/pvrusb2-encoder.c
index 54ac534..e046fda 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-encoder.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-encoder.c
@@ -294,7 +294,10 @@
pvr2_trace(
PVR2_TRACE_ERROR_LEGS,
"Giving up on command."
- " This is normally recovered by the driver.");
+ " This is normally recovered via a firmware"
+ " reload and re-initialization; concern"
+ " is only warranted if this happens repeatedly"
+ " and rapidly.");
break;
}
wrData[0] = 0x7;
diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h b/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h
index 5b152ff..de5485f 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h
+++ b/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h
@@ -270,6 +270,7 @@
int force_dirty; /* consider all controls dirty if true */
int flag_ok; /* device in known good state */
+ int flag_modulefail; /* true if at least one module failed to load */
int flag_disconnected; /* flag_ok == 0 due to disconnect */
int flag_init_ok; /* true if structure is fully initialized */
int fw1_state; /* current situation with fw1 */
@@ -332,7 +333,7 @@
/* Bit mask of PVR2_CVAL_INPUT choices which are valid for the hardware */
unsigned int input_avail_mask;
- /* Bit mask of PVR2_CVAL_INPUT choices which are currenly allowed */
+ /* Bit mask of PVR2_CVAL_INPUT choices which are currently allowed */
unsigned int input_allowed_mask;
/* Location of eeprom or a negative number if none */
diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw.c b/drivers/media/video/pvrusb2/pvrusb2-hdw.c
index 13639b3..1bbdab0 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-hdw.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-hdw.c
@@ -1447,6 +1447,7 @@
const struct firmware *fw_entry = NULL;
void *fw_ptr;
unsigned int pipe;
+ unsigned int fwsize;
int ret;
u16 address;
@@ -1473,9 +1474,21 @@
usb_clear_halt(hdw->usb_dev, usb_sndbulkpipe(hdw->usb_dev, 0 & 0x7f));
pipe = usb_sndctrlpipe(hdw->usb_dev, 0);
+ fwsize = fw_entry->size;
- if (fw_entry->size != 0x2000){
- pvr2_trace(PVR2_TRACE_ERROR_LEGS,"wrong fx2 firmware size");
+ if ((fwsize != 0x2000) &&
+ (!(hdw->hdw_desc->flag_fx2_16kb && (fwsize == 0x4000)))) {
+ if (hdw->hdw_desc->flag_fx2_16kb) {
+ pvr2_trace(PVR2_TRACE_ERROR_LEGS,
+ "Wrong fx2 firmware size"
+ " (expected 8192 or 16384, got %u)",
+ fwsize);
+ } else {
+ pvr2_trace(PVR2_TRACE_ERROR_LEGS,
+ "Wrong fx2 firmware size"
+ " (expected 8192, got %u)",
+ fwsize);
+ }
release_firmware(fw_entry);
return -ENOMEM;
}
@@ -1493,7 +1506,7 @@
chunk. */
ret = 0;
- for(address = 0; address < fw_entry->size; address += 0x800) {
+ for (address = 0; address < fwsize; address += 0x800) {
memcpy(fw_ptr, fw_entry->data + address, 0x800);
ret += usb_control_msg(hdw->usb_dev, pipe, 0xa0, 0x40, address,
0, fw_ptr, 0x800, HZ);
@@ -1509,8 +1522,8 @@
trace_firmware("Upload done (%d bytes sent)",ret);
- /* We should have written 8192 bytes */
- if (ret == 8192) {
+ /* We should have written fwsize bytes */
+ if (ret == fwsize) {
hdw->fw1_state = FW1_STATE_RELOAD;
return 0;
}
@@ -2030,7 +2043,8 @@
fname = (mid < ARRAY_SIZE(module_names)) ? module_names[mid] : NULL;
if (!fname) {
pvr2_trace(PVR2_TRACE_ERROR_LEGS,
- "Module ID %u for device %s has no name",
+ "Module ID %u for device %s has no name?"
+ " The driver might have a configuration problem.",
mid,
hdw->hdw_desc->description);
return -EINVAL;
@@ -2058,7 +2072,8 @@
if (!i2ccnt) {
pvr2_trace(PVR2_TRACE_ERROR_LEGS,
"Module ID %u (%s) for device %s:"
- " No i2c addresses",
+ " No i2c addresses."
+ " The driver might have a configuration problem.",
mid, fname, hdw->hdw_desc->description);
return -EINVAL;
}
@@ -2090,7 +2105,9 @@
if (!sd) {
pvr2_trace(PVR2_TRACE_ERROR_LEGS,
- "Module ID %u (%s) for device %s failed to load",
+ "Module ID %u (%s) for device %s failed to load."
+ " Possible missing sub-device kernel module or"
+ " initialization failure within module.",
mid, fname, hdw->hdw_desc->description);
return -EIO;
}
@@ -2132,7 +2149,10 @@
for (idx = 0; idx < ct->cnt; idx++) {
if (pvr2_hdw_load_subdev(hdw, &ct->lst[idx]) < 0) okFl = 0;
}
- if (!okFl) pvr2_hdw_render_useless(hdw);
+ if (!okFl) {
+ hdw->flag_modulefail = !0;
+ pvr2_hdw_render_useless(hdw);
+ }
}
@@ -2334,6 +2354,20 @@
break;
}
}
+ if (hdw->flag_modulefail) {
+ pvr2_trace(
+ PVR2_TRACE_ERROR_LEGS,
+ "***WARNING*** pvrusb2 driver initialization"
+ " failed due to the failure of one or more"
+ " sub-device kernel modules.");
+ pvr2_trace(
+ PVR2_TRACE_ERROR_LEGS,
+ "You need to resolve the failing condition"
+ " before this driver can function. There"
+ " should be some earlier messages giving more"
+ " information about the problem.");
+ break;
+ }
if (procreload) {
pvr2_trace(
PVR2_TRACE_ERROR_LEGS,
@@ -2419,6 +2453,8 @@
hdw = kzalloc(sizeof(*hdw),GFP_KERNEL);
pvr2_trace(PVR2_TRACE_INIT,"pvr2_hdw_create: hdw=%p, type \"%s\"",
hdw,hdw_desc->description);
+ pvr2_trace(PVR2_TRACE_INFO, "Hardware description: %s",
+ hdw_desc->description);
if (!hdw) goto fail;
init_timer(&hdw->quiescent_timer);
@@ -3480,7 +3516,7 @@
void pvr2_hdw_cpufw_set_enabled(struct pvr2_hdw *hdw,
- int prom_flag,
+ int mode,
int enable_flag)
{
int ret;
@@ -3503,11 +3539,12 @@
break;
}
- hdw->fw_cpu_flag = (prom_flag == 0);
+ hdw->fw_cpu_flag = (mode != 2);
if (hdw->fw_cpu_flag) {
+ hdw->fw_size = (mode == 1) ? 0x4000 : 0x2000;
pvr2_trace(PVR2_TRACE_FIRMWARE,
- "Preparing to suck out CPU firmware");
- hdw->fw_size = 0x2000;
+ "Preparing to suck out CPU firmware"
+ " (size=%u)", hdw->fw_size);
hdw->fw_buffer = kzalloc(hdw->fw_size,GFP_KERNEL);
if (!hdw->fw_buffer) {
hdw->fw_size = 0;
diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw.h b/drivers/media/video/pvrusb2/pvrusb2-hdw.h
index 7b69405..56e70ea 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-hdw.h
+++ b/drivers/media/video/pvrusb2/pvrusb2-hdw.h
@@ -219,7 +219,7 @@
this may prevent the device from running (and leaving this mode may
imply a device reset). */
void pvr2_hdw_cpufw_set_enabled(struct pvr2_hdw *,
- int prom_flag,
+ int mode, /* 0=8KB FX2, 1=16KB FX2, 2=PROM */
int enable_flag);
/* Return true if we're in a mode for retrieval CPU firmware */
diff --git a/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c b/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c
index a334b1a..7cbe18c 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-i2c-core.c
@@ -50,6 +50,7 @@
/* Mapping of IR schemes to known I2C addresses - if any */
static const unsigned char ir_video_addresses[] = {
+ [PVR2_IR_SCHEME_ZILOG] = 0x71,
[PVR2_IR_SCHEME_29XXX] = 0x18,
[PVR2_IR_SCHEME_24XXX] = 0x18,
};
diff --git a/drivers/media/video/pvrusb2/pvrusb2-v4l2.c b/drivers/media/video/pvrusb2/pvrusb2-v4l2.c
index 2d8825e..6aa48e0 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-v4l2.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-v4l2.c
@@ -913,6 +913,15 @@
}
+static void pvr2_v4l2_dev_disassociate_parent(struct pvr2_v4l2_dev *dip)
+{
+ if (!dip) return;
+ if (!dip->devbase.parent) return;
+ dip->devbase.parent = NULL;
+ device_move(&dip->devbase.dev, NULL, DPM_ORDER_NONE);
+}
+
+
static void pvr2_v4l2_destroy_no_lock(struct pvr2_v4l2 *vp)
{
if (vp->dev_video) {
@@ -943,6 +952,8 @@
struct pvr2_v4l2 *vp;
vp = container_of(chp,struct pvr2_v4l2,channel);
if (!vp->channel.mc_head->disconnect_flag) return;
+ pvr2_v4l2_dev_disassociate_parent(vp->dev_video);
+ pvr2_v4l2_dev_disassociate_parent(vp->dev_radio);
if (vp->vfirst) return;
pvr2_v4l2_destroy_no_lock(vp);
}
@@ -1250,12 +1261,13 @@
struct pvr2_v4l2 *vp,
int v4l_type)
{
+ struct usb_device *usbdev;
int mindevnum;
int unit_number;
int *nr_ptr = NULL;
dip->v4lp = vp;
-
+ usbdev = pvr2_hdw_get_dev(vp->channel.mc_head->hdw);
dip->v4l_type = v4l_type;
switch (v4l_type) {
case VFL_TYPE_GRABBER:
@@ -1296,6 +1308,7 @@
if (nr_ptr && (unit_number >= 0) && (unit_number < PVR_NUM)) {
mindevnum = nr_ptr[unit_number];
}
+ dip->devbase.parent = &usbdev->dev;
if ((video_register_device(&dip->devbase,
dip->v4l_type, mindevnum) < 0) &&
(video_register_device(&dip->devbase,
diff --git a/drivers/media/video/pwc/pwc-if.c b/drivers/media/video/pwc/pwc-if.c
index f976df4..89b620f 100644
--- a/drivers/media/video/pwc/pwc-if.c
+++ b/drivers/media/video/pwc/pwc-if.c
@@ -68,6 +68,7 @@
#endif
#include <linux/vmalloc.h>
#include <asm/io.h>
+#include <linux/kernel.h> /* simple_strtol() */
#include "pwc.h"
#include "pwc-kiara.h"
@@ -1916,19 +1917,6 @@
unlock_kernel();
}
-/* *grunt* We have to do atoi ourselves :-( */
-static int pwc_atoi(const char *s)
-{
- int k = 0;
-
- k = 0;
- while (*s != '\0' && *s >= '0' && *s <= '9') {
- k = 10 * k + (*s - '0');
- s++;
- }
- return k;
-}
-
/*
* Initialization code & module stuff
@@ -2078,13 +2066,16 @@
}
else {
/* No type or serial number specified, just a number. */
- device_hint[i].device_node = pwc_atoi(s);
+ device_hint[i].device_node =
+ simple_strtol(s, NULL, 10);
}
}
else {
/* There's a colon, so we have at least a type and a device node */
- device_hint[i].type = pwc_atoi(s);
- device_hint[i].device_node = pwc_atoi(colon + 1);
+ device_hint[i].type =
+ simple_strtol(s, NULL, 10);
+ device_hint[i].device_node =
+ simple_strtol(colon + 1, NULL, 10);
if (*dot != '\0') {
/* There's a serial number as well */
int k;
diff --git a/drivers/media/video/rj54n1cb0c.c b/drivers/media/video/rj54n1cb0c.c
new file mode 100644
index 0000000..373f2a3
--- /dev/null
+++ b/drivers/media/video/rj54n1cb0c.c
@@ -0,0 +1,1219 @@
+/*
+ * Driver for RJ54N1CB0C CMOS Image Sensor from Micron
+ *
+ * Copyright (C) 2009, Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/videodev2.h>
+
+#include <media/v4l2-subdev.h>
+#include <media/v4l2-chip-ident.h>
+#include <media/soc_camera.h>
+
+#define RJ54N1_DEV_CODE 0x0400
+#define RJ54N1_DEV_CODE2 0x0401
+#define RJ54N1_OUT_SEL 0x0403
+#define RJ54N1_XY_OUTPUT_SIZE_S_H 0x0404
+#define RJ54N1_X_OUTPUT_SIZE_S_L 0x0405
+#define RJ54N1_Y_OUTPUT_SIZE_S_L 0x0406
+#define RJ54N1_XY_OUTPUT_SIZE_P_H 0x0407
+#define RJ54N1_X_OUTPUT_SIZE_P_L 0x0408
+#define RJ54N1_Y_OUTPUT_SIZE_P_L 0x0409
+#define RJ54N1_LINE_LENGTH_PCK_S_H 0x040a
+#define RJ54N1_LINE_LENGTH_PCK_S_L 0x040b
+#define RJ54N1_LINE_LENGTH_PCK_P_H 0x040c
+#define RJ54N1_LINE_LENGTH_PCK_P_L 0x040d
+#define RJ54N1_RESIZE_N 0x040e
+#define RJ54N1_RESIZE_N_STEP 0x040f
+#define RJ54N1_RESIZE_STEP 0x0410
+#define RJ54N1_RESIZE_HOLD_H 0x0411
+#define RJ54N1_RESIZE_HOLD_L 0x0412
+#define RJ54N1_H_OBEN_OFS 0x0413
+#define RJ54N1_V_OBEN_OFS 0x0414
+#define RJ54N1_RESIZE_CONTROL 0x0415
+#define RJ54N1_INC_USE_SEL_H 0x0425
+#define RJ54N1_INC_USE_SEL_L 0x0426
+#define RJ54N1_MIRROR_STILL_MODE 0x0427
+#define RJ54N1_INIT_START 0x0428
+#define RJ54N1_SCALE_1_2_LEV 0x0429
+#define RJ54N1_SCALE_4_LEV 0x042a
+#define RJ54N1_Y_GAIN 0x04d8
+#define RJ54N1_APT_GAIN_UP 0x04fa
+#define RJ54N1_RA_SEL_UL 0x0530
+#define RJ54N1_BYTE_SWAP 0x0531
+#define RJ54N1_OUT_SIGPO 0x053b
+#define RJ54N1_FRAME_LENGTH_S_H 0x0595
+#define RJ54N1_FRAME_LENGTH_S_L 0x0596
+#define RJ54N1_FRAME_LENGTH_P_H 0x0597
+#define RJ54N1_FRAME_LENGTH_P_L 0x0598
+#define RJ54N1_IOC 0x05ef
+#define RJ54N1_TG_BYPASS 0x0700
+#define RJ54N1_PLL_L 0x0701
+#define RJ54N1_PLL_N 0x0702
+#define RJ54N1_PLL_EN 0x0704
+#define RJ54N1_RATIO_TG 0x0706
+#define RJ54N1_RATIO_T 0x0707
+#define RJ54N1_RATIO_R 0x0708
+#define RJ54N1_RAMP_TGCLK_EN 0x0709
+#define RJ54N1_OCLK_DSP 0x0710
+#define RJ54N1_RATIO_OP 0x0711
+#define RJ54N1_RATIO_O 0x0712
+#define RJ54N1_OCLK_SEL_EN 0x0713
+#define RJ54N1_CLK_RST 0x0717
+#define RJ54N1_RESET_STANDBY 0x0718
+
+#define E_EXCLK (1 << 7)
+#define SOFT_STDBY (1 << 4)
+#define SEN_RSTX (1 << 2)
+#define TG_RSTX (1 << 1)
+#define DSP_RSTX (1 << 0)
+
+#define RESIZE_HOLD_SEL (1 << 2)
+#define RESIZE_GO (1 << 1)
+
+#define RJ54N1_COLUMN_SKIP 0
+#define RJ54N1_ROW_SKIP 0
+#define RJ54N1_MAX_WIDTH 1600
+#define RJ54N1_MAX_HEIGHT 1200
+
+/* I2C addresses: 0x50, 0x51, 0x60, 0x61 */
+
+static const struct soc_camera_data_format rj54n1_colour_formats[] = {
+ {
+ .name = "YUYV",
+ .depth = 16,
+ .fourcc = V4L2_PIX_FMT_YUYV,
+ .colorspace = V4L2_COLORSPACE_JPEG,
+ }, {
+ .name = "RGB565",
+ .depth = 16,
+ .fourcc = V4L2_PIX_FMT_RGB565,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ }
+};
+
+struct rj54n1_clock_div {
+ u8 ratio_tg;
+ u8 ratio_t;
+ u8 ratio_r;
+ u8 ratio_op;
+ u8 ratio_o;
+};
+
+struct rj54n1 {
+ struct v4l2_subdev subdev;
+ struct v4l2_rect rect; /* Sensor window */
+ unsigned short width; /* Output window */
+ unsigned short height;
+ unsigned short resize; /* Sensor * 1024 / resize = Output */
+ struct rj54n1_clock_div clk_div;
+ u32 fourcc;
+ unsigned short scale;
+ u8 bank;
+};
+
+struct rj54n1_reg_val {
+ u16 reg;
+ u8 val;
+};
+
+const static struct rj54n1_reg_val bank_4[] = {
+ {0x417, 0},
+ {0x42c, 0},
+ {0x42d, 0xf0},
+ {0x42e, 0},
+ {0x42f, 0x50},
+ {0x430, 0xf5},
+ {0x431, 0x16},
+ {0x432, 0x20},
+ {0x433, 0},
+ {0x434, 0xc8},
+ {0x43c, 8},
+ {0x43e, 0x90},
+ {0x445, 0x83},
+ {0x4ba, 0x58},
+ {0x4bb, 4},
+ {0x4bc, 0x20},
+ {0x4db, 4},
+ {0x4fe, 2},
+};
+
+const static struct rj54n1_reg_val bank_5[] = {
+ {0x514, 0},
+ {0x516, 0},
+ {0x518, 0},
+ {0x51a, 0},
+ {0x51d, 0xff},
+ {0x56f, 0x28},
+ {0x575, 0x40},
+ {0x5bc, 0x48},
+ {0x5c1, 6},
+ {0x5e5, 0x11},
+ {0x5e6, 0x43},
+ {0x5e7, 0x33},
+ {0x5e8, 0x21},
+ {0x5e9, 0x30},
+ {0x5ea, 0x0},
+ {0x5eb, 0xa5},
+ {0x5ec, 0xff},
+ {0x5fe, 2},
+};
+
+const static struct rj54n1_reg_val bank_7[] = {
+ {0x70a, 0},
+ {0x714, 0xff},
+ {0x715, 0xff},
+ {0x716, 0x1f},
+ {0x7FE, 0x02},
+};
+
+const static struct rj54n1_reg_val bank_8[] = {
+ {0x800, 0x00},
+ {0x801, 0x01},
+ {0x802, 0x61},
+ {0x805, 0x00},
+ {0x806, 0x00},
+ {0x807, 0x00},
+ {0x808, 0x00},
+ {0x809, 0x01},
+ {0x80A, 0x61},
+ {0x80B, 0x00},
+ {0x80C, 0x01},
+ {0x80D, 0x00},
+ {0x80E, 0x00},
+ {0x80F, 0x00},
+ {0x810, 0x00},
+ {0x811, 0x01},
+ {0x812, 0x61},
+ {0x813, 0x00},
+ {0x814, 0x11},
+ {0x815, 0x00},
+ {0x816, 0x41},
+ {0x817, 0x00},
+ {0x818, 0x51},
+ {0x819, 0x01},
+ {0x81A, 0x1F},
+ {0x81B, 0x00},
+ {0x81C, 0x01},
+ {0x81D, 0x00},
+ {0x81E, 0x11},
+ {0x81F, 0x00},
+ {0x820, 0x41},
+ {0x821, 0x00},
+ {0x822, 0x51},
+ {0x823, 0x00},
+ {0x824, 0x00},
+ {0x825, 0x00},
+ {0x826, 0x47},
+ {0x827, 0x01},
+ {0x828, 0x4F},
+ {0x829, 0x00},
+ {0x82A, 0x00},
+ {0x82B, 0x00},
+ {0x82C, 0x30},
+ {0x82D, 0x00},
+ {0x82E, 0x40},
+ {0x82F, 0x00},
+ {0x830, 0xB3},
+ {0x831, 0x00},
+ {0x832, 0xE3},
+ {0x833, 0x00},
+ {0x834, 0x00},
+ {0x835, 0x00},
+ {0x836, 0x00},
+ {0x837, 0x00},
+ {0x838, 0x00},
+ {0x839, 0x01},
+ {0x83A, 0x61},
+ {0x83B, 0x00},
+ {0x83C, 0x01},
+ {0x83D, 0x00},
+ {0x83E, 0x00},
+ {0x83F, 0x00},
+ {0x840, 0x00},
+ {0x841, 0x01},
+ {0x842, 0x61},
+ {0x843, 0x00},
+ {0x844, 0x1D},
+ {0x845, 0x00},
+ {0x846, 0x00},
+ {0x847, 0x00},
+ {0x848, 0x00},
+ {0x849, 0x01},
+ {0x84A, 0x1F},
+ {0x84B, 0x00},
+ {0x84C, 0x05},
+ {0x84D, 0x00},
+ {0x84E, 0x19},
+ {0x84F, 0x01},
+ {0x850, 0x21},
+ {0x851, 0x01},
+ {0x852, 0x5D},
+ {0x853, 0x00},
+ {0x854, 0x00},
+ {0x855, 0x00},
+ {0x856, 0x19},
+ {0x857, 0x01},
+ {0x858, 0x21},
+ {0x859, 0x00},
+ {0x85A, 0x00},
+ {0x85B, 0x00},
+ {0x85C, 0x00},
+ {0x85D, 0x00},
+ {0x85E, 0x00},
+ {0x85F, 0x00},
+ {0x860, 0xB3},
+ {0x861, 0x00},
+ {0x862, 0xE3},
+ {0x863, 0x00},
+ {0x864, 0x00},
+ {0x865, 0x00},
+ {0x866, 0x00},
+ {0x867, 0x00},
+ {0x868, 0x00},
+ {0x869, 0xE2},
+ {0x86A, 0x00},
+ {0x86B, 0x01},
+ {0x86C, 0x06},
+ {0x86D, 0x00},
+ {0x86E, 0x00},
+ {0x86F, 0x00},
+ {0x870, 0x60},
+ {0x871, 0x8C},
+ {0x872, 0x10},
+ {0x873, 0x00},
+ {0x874, 0xE0},
+ {0x875, 0x00},
+ {0x876, 0x27},
+ {0x877, 0x01},
+ {0x878, 0x00},
+ {0x879, 0x00},
+ {0x87A, 0x00},
+ {0x87B, 0x03},
+ {0x87C, 0x00},
+ {0x87D, 0x00},
+ {0x87E, 0x00},
+ {0x87F, 0x00},
+ {0x880, 0x00},
+ {0x881, 0x00},
+ {0x882, 0x00},
+ {0x883, 0x00},
+ {0x884, 0x00},
+ {0x885, 0x00},
+ {0x886, 0xF8},
+ {0x887, 0x00},
+ {0x888, 0x03},
+ {0x889, 0x00},
+ {0x88A, 0x64},
+ {0x88B, 0x00},
+ {0x88C, 0x03},
+ {0x88D, 0x00},
+ {0x88E, 0xB1},
+ {0x88F, 0x00},
+ {0x890, 0x03},
+ {0x891, 0x01},
+ {0x892, 0x1D},
+ {0x893, 0x00},
+ {0x894, 0x03},
+ {0x895, 0x01},
+ {0x896, 0x4B},
+ {0x897, 0x00},
+ {0x898, 0xE5},
+ {0x899, 0x00},
+ {0x89A, 0x01},
+ {0x89B, 0x00},
+ {0x89C, 0x01},
+ {0x89D, 0x04},
+ {0x89E, 0xC8},
+ {0x89F, 0x00},
+ {0x8A0, 0x01},
+ {0x8A1, 0x01},
+ {0x8A2, 0x61},
+ {0x8A3, 0x00},
+ {0x8A4, 0x01},
+ {0x8A5, 0x00},
+ {0x8A6, 0x00},
+ {0x8A7, 0x00},
+ {0x8A8, 0x00},
+ {0x8A9, 0x00},
+ {0x8AA, 0x7F},
+ {0x8AB, 0x03},
+ {0x8AC, 0x00},
+ {0x8AD, 0x00},
+ {0x8AE, 0x00},
+ {0x8AF, 0x00},
+ {0x8B0, 0x00},
+ {0x8B1, 0x00},
+ {0x8B6, 0x00},
+ {0x8B7, 0x01},
+ {0x8B8, 0x00},
+ {0x8B9, 0x00},
+ {0x8BA, 0x02},
+ {0x8BB, 0x00},
+ {0x8BC, 0xFF},
+ {0x8BD, 0x00},
+ {0x8FE, 0x02},
+};
+
+const static struct rj54n1_reg_val bank_10[] = {
+ {0x10bf, 0x69}
+};
+
+/* Clock dividers - these are default register values, divider = register + 1 */
+const static struct rj54n1_clock_div clk_div = {
+ .ratio_tg = 3 /* default: 5 */,
+ .ratio_t = 4 /* default: 1 */,
+ .ratio_r = 4 /* default: 0 */,
+ .ratio_op = 1 /* default: 5 */,
+ .ratio_o = 9 /* default: 0 */,
+};
+
+static struct rj54n1 *to_rj54n1(const struct i2c_client *client)
+{
+ return container_of(i2c_get_clientdata(client), struct rj54n1, subdev);
+}
+
+static int reg_read(struct i2c_client *client, const u16 reg)
+{
+ struct rj54n1 *rj54n1 = to_rj54n1(client);
+ int ret;
+
+ /* set bank */
+ if (rj54n1->bank != reg >> 8) {
+ dev_dbg(&client->dev, "[0x%x] = 0x%x\n", 0xff, reg >> 8);
+ ret = i2c_smbus_write_byte_data(client, 0xff, reg >> 8);
+ if (ret < 0)
+ return ret;
+ rj54n1->bank = reg >> 8;
+ }
+ return i2c_smbus_read_byte_data(client, reg & 0xff);
+}
+
+static int reg_write(struct i2c_client *client, const u16 reg,
+ const u8 data)
+{
+ struct rj54n1 *rj54n1 = to_rj54n1(client);
+ int ret;
+
+ /* set bank */
+ if (rj54n1->bank != reg >> 8) {
+ dev_dbg(&client->dev, "[0x%x] = 0x%x\n", 0xff, reg >> 8);
+ ret = i2c_smbus_write_byte_data(client, 0xff, reg >> 8);
+ if (ret < 0)
+ return ret;
+ rj54n1->bank = reg >> 8;
+ }
+ dev_dbg(&client->dev, "[0x%x] = 0x%x\n", reg & 0xff, data);
+ return i2c_smbus_write_byte_data(client, reg & 0xff, data);
+}
+
+static int reg_set(struct i2c_client *client, const u16 reg,
+ const u8 data, const u8 mask)
+{
+ int ret;
+
+ ret = reg_read(client, reg);
+ if (ret < 0)
+ return ret;
+ return reg_write(client, reg, (ret & ~mask) | (data & mask));
+}
+
+static int reg_write_multiple(struct i2c_client *client,
+ const struct rj54n1_reg_val *rv, const int n)
+{
+ int i, ret;
+
+ for (i = 0; i < n; i++) {
+ ret = reg_write(client, rv->reg, rv->val);
+ if (ret < 0)
+ return ret;
+ rv++;
+ }
+
+ return 0;
+}
+
+static int rj54n1_s_stream(struct v4l2_subdev *sd, int enable)
+{
+ /* TODO: start / stop streaming */
+ return 0;
+}
+
+static int rj54n1_set_bus_param(struct soc_camera_device *icd,
+ unsigned long flags)
+{
+ struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
+ struct i2c_client *client = sd->priv;
+ /* Figures 2.5-1 to 2.5-3 - default falling pixclk edge */
+
+ if (flags & SOCAM_PCLK_SAMPLE_RISING)
+ return reg_write(client, RJ54N1_OUT_SIGPO, 1 << 4);
+ else
+ return reg_write(client, RJ54N1_OUT_SIGPO, 0);
+}
+
+static unsigned long rj54n1_query_bus_param(struct soc_camera_device *icd)
+{
+ struct soc_camera_link *icl = to_soc_camera_link(icd);
+ const unsigned long flags =
+ SOCAM_PCLK_SAMPLE_RISING | SOCAM_PCLK_SAMPLE_FALLING |
+ SOCAM_MASTER | SOCAM_DATAWIDTH_8 |
+ SOCAM_HSYNC_ACTIVE_HIGH | SOCAM_VSYNC_ACTIVE_HIGH |
+ SOCAM_DATA_ACTIVE_HIGH;
+
+ return soc_camera_apply_sensor_flags(icl, flags);
+}
+
+static int rj54n1_set_rect(struct i2c_client *client,
+ u16 reg_x, u16 reg_y, u16 reg_xy,
+ u32 width, u32 height)
+{
+ int ret;
+
+ ret = reg_write(client, reg_xy,
+ ((width >> 4) & 0x70) |
+ ((height >> 8) & 7));
+
+ if (!ret)
+ ret = reg_write(client, reg_x, width & 0xff);
+ if (!ret)
+ ret = reg_write(client, reg_y, height & 0xff);
+
+ return ret;
+}
+
+/*
+ * Some commands, specifically certain initialisation sequences, require
+ * a commit operation.
+ */
+static int rj54n1_commit(struct i2c_client *client)
+{
+ int ret = reg_write(client, RJ54N1_INIT_START, 1);
+ msleep(10);
+ if (!ret)
+ ret = reg_write(client, RJ54N1_INIT_START, 0);
+ return ret;
+}
+
+static int rj54n1_g_crop(struct v4l2_subdev *sd, struct v4l2_crop *a)
+{
+ struct i2c_client *client = sd->priv;
+ struct rj54n1 *rj54n1 = to_rj54n1(client);
+
+ a->c = rj54n1->rect;
+ a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+
+ return 0;
+}
+
+static int rj54n1_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a)
+{
+ a->bounds.left = RJ54N1_COLUMN_SKIP;
+ a->bounds.top = RJ54N1_ROW_SKIP;
+ a->bounds.width = RJ54N1_MAX_WIDTH;
+ a->bounds.height = RJ54N1_MAX_HEIGHT;
+ a->defrect = a->bounds;
+ a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+ a->pixelaspect.numerator = 1;
+ a->pixelaspect.denominator = 1;
+
+ return 0;
+}
+
+static int rj54n1_g_fmt(struct v4l2_subdev *sd, struct v4l2_format *f)
+{
+ struct i2c_client *client = sd->priv;
+ struct rj54n1 *rj54n1 = to_rj54n1(client);
+ struct v4l2_pix_format *pix = &f->fmt.pix;
+
+ pix->pixelformat = rj54n1->fourcc;
+ pix->field = V4L2_FIELD_NONE;
+ pix->width = rj54n1->width;
+ pix->height = rj54n1->height;
+
+ return 0;
+}
+
+/*
+ * The actual geometry configuration routine. It scales the input window into
+ * the output one, updates the window sizes and returns an error or the resize
+ * coefficient on success. Note: we only use the "Fixed Scaling" on this camera.
+ */
+static int rj54n1_sensor_scale(struct v4l2_subdev *sd, u32 *in_w, u32 *in_h,
+ u32 *out_w, u32 *out_h)
+{
+ struct i2c_client *client = sd->priv;
+ unsigned int skip, resize, input_w = *in_w, input_h = *in_h,
+ output_w = *out_w, output_h = *out_h;
+ u16 inc_sel;
+ int ret;
+
+ ret = rj54n1_set_rect(client, RJ54N1_X_OUTPUT_SIZE_S_L,
+ RJ54N1_Y_OUTPUT_SIZE_S_L,
+ RJ54N1_XY_OUTPUT_SIZE_S_H, output_w, output_h);
+ if (!ret)
+ ret = rj54n1_set_rect(client, RJ54N1_X_OUTPUT_SIZE_P_L,
+ RJ54N1_Y_OUTPUT_SIZE_P_L,
+ RJ54N1_XY_OUTPUT_SIZE_P_H, output_w, output_h);
+
+ if (ret < 0)
+ return ret;
+
+ if (output_w > input_w || output_h > input_h) {
+ input_w = output_w;
+ input_h = output_h;
+
+ resize = 1024;
+ } else {
+ unsigned int resize_x, resize_y;
+ resize_x = input_w * 1024 / output_w;
+ resize_y = input_h * 1024 / output_h;
+
+ resize = min(resize_x, resize_y);
+
+ /* Prohibited value ranges */
+ switch (resize) {
+ case 2040 ... 2047:
+ resize = 2039;
+ break;
+ case 4080 ... 4095:
+ resize = 4079;
+ break;
+ case 8160 ... 8191:
+ resize = 8159;
+ break;
+ case 16320 ... 16383:
+ resize = 16319;
+ }
+
+ input_w = output_w * resize / 1024;
+ input_h = output_h * resize / 1024;
+ }
+
+ /* Set scaling */
+ ret = reg_write(client, RJ54N1_RESIZE_HOLD_L, resize & 0xff);
+ if (!ret)
+ ret = reg_write(client, RJ54N1_RESIZE_HOLD_H, resize >> 8);
+
+ if (ret < 0)
+ return ret;
+
+ /*
+ * Configure a skipping bitmask. The sensor will select a skipping value
+ * among set bits automatically.
+ */
+ skip = min(resize / 1024, (unsigned)15);
+ inc_sel = 1 << skip;
+
+ if (inc_sel <= 2)
+ inc_sel = 0xc;
+ else if (resize & 1023 && skip < 15)
+ inc_sel |= 1 << (skip + 1);
+
+ ret = reg_write(client, RJ54N1_INC_USE_SEL_L, inc_sel & 0xfc);
+ if (!ret)
+ ret = reg_write(client, RJ54N1_INC_USE_SEL_H, inc_sel >> 8);
+
+ /* Start resizing */
+ if (!ret)
+ ret = reg_write(client, RJ54N1_RESIZE_CONTROL,
+ RESIZE_HOLD_SEL | RESIZE_GO | 1);
+
+ if (ret < 0)
+ return ret;
+
+ dev_dbg(&client->dev, "resize %u, skip %u\n", resize, skip);
+
+ /* Constant taken from manufacturer's example */
+ msleep(230);
+
+ ret = reg_write(client, RJ54N1_RESIZE_CONTROL, RESIZE_HOLD_SEL | 1);
+ if (ret < 0)
+ return ret;
+
+ *in_w = input_w;
+ *in_h = input_h;
+ *out_w = output_w;
+ *out_h = output_h;
+
+ return resize;
+}
+
+static int rj54n1_set_clock(struct i2c_client *client)
+{
+ struct rj54n1 *rj54n1 = to_rj54n1(client);
+ int ret;
+
+ /* Enable external clock */
+ ret = reg_write(client, RJ54N1_RESET_STANDBY, E_EXCLK | SOFT_STDBY);
+ /* Leave stand-by */
+ if (!ret)
+ ret = reg_write(client, RJ54N1_RESET_STANDBY, E_EXCLK);
+
+ if (!ret)
+ ret = reg_write(client, RJ54N1_PLL_L, 2);
+ if (!ret)
+ ret = reg_write(client, RJ54N1_PLL_N, 0x31);
+
+ /* TGCLK dividers */
+ if (!ret)
+ ret = reg_write(client, RJ54N1_RATIO_TG,
+ rj54n1->clk_div.ratio_tg);
+ if (!ret)
+ ret = reg_write(client, RJ54N1_RATIO_T,
+ rj54n1->clk_div.ratio_t);
+ if (!ret)
+ ret = reg_write(client, RJ54N1_RATIO_R,
+ rj54n1->clk_div.ratio_r);
+
+ /* Enable TGCLK & RAMP */
+ if (!ret)
+ ret = reg_write(client, RJ54N1_RAMP_TGCLK_EN, 3);
+
+ /* Disable clock output */
+ if (!ret)
+ ret = reg_write(client, RJ54N1_OCLK_DSP, 0);
+
+ /* Set divisors */
+ if (!ret)
+ ret = reg_write(client, RJ54N1_RATIO_OP,
+ rj54n1->clk_div.ratio_op);
+ if (!ret)
+ ret = reg_write(client, RJ54N1_RATIO_O,
+ rj54n1->clk_div.ratio_o);
+
+ /* Enable OCLK */
+ if (!ret)
+ ret = reg_write(client, RJ54N1_OCLK_SEL_EN, 1);
+
+ /* Use PLL for Timing Generator, write 2 to reserved bits */
+ if (!ret)
+ ret = reg_write(client, RJ54N1_TG_BYPASS, 2);
+
+ /* Take sensor out of reset */
+ if (!ret)
+ ret = reg_write(client, RJ54N1_RESET_STANDBY,
+ E_EXCLK | SEN_RSTX);
+ /* Enable PLL */
+ if (!ret)
+ ret = reg_write(client, RJ54N1_PLL_EN, 1);
+
+ /* Wait for PLL to stabilise */
+ msleep(10);
+
+ /* Enable clock to frequency divider */
+ if (!ret)
+ ret = reg_write(client, RJ54N1_CLK_RST, 1);
+
+ if (!ret)
+ ret = reg_read(client, RJ54N1_CLK_RST);
+ if (ret != 1) {
+ dev_err(&client->dev,
+ "Resetting RJ54N1CB0C clock failed: %d!\n", ret);
+ return -EIO;
+ }
+ /* Start the PLL */
+ ret = reg_set(client, RJ54N1_OCLK_DSP, 1, 1);
+
+ /* Enable OCLK */
+ if (!ret)
+ ret = reg_write(client, RJ54N1_OCLK_SEL_EN, 1);
+
+ return ret;
+}
+
+static int rj54n1_reg_init(struct i2c_client *client)
+{
+ int ret = rj54n1_set_clock(client);
+
+ if (!ret)
+ ret = reg_write_multiple(client, bank_7, ARRAY_SIZE(bank_7));
+ if (!ret)
+ ret = reg_write_multiple(client, bank_10, ARRAY_SIZE(bank_10));
+
+ /* Set binning divisors */
+ if (!ret)
+ ret = reg_write(client, RJ54N1_SCALE_1_2_LEV, 3 | (7 << 4));
+ if (!ret)
+ ret = reg_write(client, RJ54N1_SCALE_4_LEV, 0xf);
+
+ /* Switch to fixed resize mode */
+ if (!ret)
+ ret = reg_write(client, RJ54N1_RESIZE_CONTROL,
+ RESIZE_HOLD_SEL | 1);
+
+ /* Set gain */
+ if (!ret)
+ ret = reg_write(client, RJ54N1_Y_GAIN, 0x84);
+
+ /* Mirror the image back: default is upside down and left-to-right... */
+ if (!ret)
+ ret = reg_set(client, RJ54N1_MIRROR_STILL_MODE, 3, 3);
+
+ if (!ret)
+ ret = reg_write_multiple(client, bank_4, ARRAY_SIZE(bank_4));
+ if (!ret)
+ ret = reg_write_multiple(client, bank_5, ARRAY_SIZE(bank_5));
+ if (!ret)
+ ret = reg_write_multiple(client, bank_8, ARRAY_SIZE(bank_8));
+
+ if (!ret)
+ ret = reg_write(client, RJ54N1_RESET_STANDBY,
+ E_EXCLK | DSP_RSTX | SEN_RSTX);
+
+ /* Commit init */
+ if (!ret)
+ ret = rj54n1_commit(client);
+
+ /* Take DSP, TG, sensor out of reset */
+ if (!ret)
+ ret = reg_write(client, RJ54N1_RESET_STANDBY,
+ E_EXCLK | DSP_RSTX | TG_RSTX | SEN_RSTX);
+
+ if (!ret)
+ ret = reg_write(client, 0x7fe, 2);
+
+ /* Constant taken from manufacturer's example */
+ msleep(700);
+
+ return ret;
+}
+
+/* FIXME: streaming output only up to 800x600 is functional */
+static int rj54n1_try_fmt(struct v4l2_subdev *sd, struct v4l2_format *f)
+{
+ struct v4l2_pix_format *pix = &f->fmt.pix;
+
+ pix->field = V4L2_FIELD_NONE;
+
+ if (pix->width > 800)
+ pix->width = 800;
+ if (pix->height > 600)
+ pix->height = 600;
+
+ return 0;
+}
+
+static int rj54n1_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *f)
+{
+ struct i2c_client *client = sd->priv;
+ struct rj54n1 *rj54n1 = to_rj54n1(client);
+ struct v4l2_pix_format *pix = &f->fmt.pix;
+ unsigned int output_w, output_h,
+ input_w = rj54n1->rect.width, input_h = rj54n1->rect.height;
+ int ret;
+
+ /*
+ * The host driver can call us without .try_fmt(), so, we have to take
+ * care ourseleves
+ */
+ ret = rj54n1_try_fmt(sd, f);
+
+ /*
+ * Verify if the sensor has just been powered on. TODO: replace this
+ * with proper PM, when a suitable API is available.
+ */
+ if (!ret)
+ ret = reg_read(client, RJ54N1_RESET_STANDBY);
+ if (ret < 0)
+ return ret;
+
+ if (!(ret & E_EXCLK)) {
+ ret = rj54n1_reg_init(client);
+ if (ret < 0)
+ return ret;
+ }
+
+ /* RA_SEL_UL is only relevant for raw modes, ignored otherwise. */
+ switch (pix->pixelformat) {
+ case V4L2_PIX_FMT_YUYV:
+ ret = reg_write(client, RJ54N1_OUT_SEL, 0);
+ if (!ret)
+ ret = reg_set(client, RJ54N1_BYTE_SWAP, 8, 8);
+ break;
+ case V4L2_PIX_FMT_RGB565:
+ ret = reg_write(client, RJ54N1_OUT_SEL, 0x11);
+ if (!ret)
+ ret = reg_set(client, RJ54N1_BYTE_SWAP, 8, 8);
+ break;
+ default:
+ ret = -EINVAL;
+ }
+
+ if (ret < 0)
+ return ret;
+
+ /* Supported scales 1:1 - 1:16 */
+ if (pix->width < input_w / 16)
+ pix->width = input_w / 16;
+ if (pix->height < input_h / 16)
+ pix->height = input_h / 16;
+
+ output_w = pix->width;
+ output_h = pix->height;
+
+ ret = rj54n1_sensor_scale(sd, &input_w, &input_h, &output_w, &output_h);
+ if (ret < 0)
+ return ret;
+
+ rj54n1->fourcc = pix->pixelformat;
+ rj54n1->resize = ret;
+ rj54n1->rect.width = input_w;
+ rj54n1->rect.height = input_h;
+ rj54n1->width = output_w;
+ rj54n1->height = output_h;
+
+ pix->width = output_w;
+ pix->height = output_h;
+ pix->field = V4L2_FIELD_NONE;
+
+ return ret;
+}
+
+static int rj54n1_g_chip_ident(struct v4l2_subdev *sd,
+ struct v4l2_dbg_chip_ident *id)
+{
+ struct i2c_client *client = sd->priv;
+
+ if (id->match.type != V4L2_CHIP_MATCH_I2C_ADDR)
+ return -EINVAL;
+
+ if (id->match.addr != client->addr)
+ return -ENODEV;
+
+ id->ident = V4L2_IDENT_RJ54N1CB0C;
+ id->revision = 0;
+
+ return 0;
+}
+
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+static int rj54n1_g_register(struct v4l2_subdev *sd,
+ struct v4l2_dbg_register *reg)
+{
+ struct i2c_client *client = sd->priv;
+
+ if (reg->match.type != V4L2_CHIP_MATCH_I2C_ADDR ||
+ reg->reg < 0x400 || reg->reg > 0x1fff)
+ /* Registers > 0x0800 are only available from Sharp support */
+ return -EINVAL;
+
+ if (reg->match.addr != client->addr)
+ return -ENODEV;
+
+ reg->size = 1;
+ reg->val = reg_read(client, reg->reg);
+
+ if (reg->val > 0xff)
+ return -EIO;
+
+ return 0;
+}
+
+static int rj54n1_s_register(struct v4l2_subdev *sd,
+ struct v4l2_dbg_register *reg)
+{
+ struct i2c_client *client = sd->priv;
+
+ if (reg->match.type != V4L2_CHIP_MATCH_I2C_ADDR ||
+ reg->reg < 0x400 || reg->reg > 0x1fff)
+ /* Registers >= 0x0800 are only available from Sharp support */
+ return -EINVAL;
+
+ if (reg->match.addr != client->addr)
+ return -ENODEV;
+
+ if (reg_write(client, reg->reg, reg->val) < 0)
+ return -EIO;
+
+ return 0;
+}
+#endif
+
+static const struct v4l2_queryctrl rj54n1_controls[] = {
+ {
+ .id = V4L2_CID_VFLIP,
+ .type = V4L2_CTRL_TYPE_BOOLEAN,
+ .name = "Flip Vertically",
+ .minimum = 0,
+ .maximum = 1,
+ .step = 1,
+ .default_value = 0,
+ }, {
+ .id = V4L2_CID_HFLIP,
+ .type = V4L2_CTRL_TYPE_BOOLEAN,
+ .name = "Flip Horizontally",
+ .minimum = 0,
+ .maximum = 1,
+ .step = 1,
+ .default_value = 0,
+ }, {
+ .id = V4L2_CID_GAIN,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Gain",
+ .minimum = 0,
+ .maximum = 127,
+ .step = 1,
+ .default_value = 66,
+ .flags = V4L2_CTRL_FLAG_SLIDER,
+ },
+};
+
+static struct soc_camera_ops rj54n1_ops = {
+ .set_bus_param = rj54n1_set_bus_param,
+ .query_bus_param = rj54n1_query_bus_param,
+ .controls = rj54n1_controls,
+ .num_controls = ARRAY_SIZE(rj54n1_controls),
+};
+
+static int rj54n1_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+{
+ struct i2c_client *client = sd->priv;
+ int data;
+
+ switch (ctrl->id) {
+ case V4L2_CID_VFLIP:
+ data = reg_read(client, RJ54N1_MIRROR_STILL_MODE);
+ if (data < 0)
+ return -EIO;
+ ctrl->value = !(data & 1);
+ break;
+ case V4L2_CID_HFLIP:
+ data = reg_read(client, RJ54N1_MIRROR_STILL_MODE);
+ if (data < 0)
+ return -EIO;
+ ctrl->value = !(data & 2);
+ break;
+ case V4L2_CID_GAIN:
+ data = reg_read(client, RJ54N1_Y_GAIN);
+ if (data < 0)
+ return -EIO;
+
+ ctrl->value = data / 2;
+ break;
+ }
+
+ return 0;
+}
+
+static int rj54n1_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+{
+ int data;
+ struct i2c_client *client = sd->priv;
+ const struct v4l2_queryctrl *qctrl;
+
+ qctrl = soc_camera_find_qctrl(&rj54n1_ops, ctrl->id);
+ if (!qctrl)
+ return -EINVAL;
+
+ switch (ctrl->id) {
+ case V4L2_CID_VFLIP:
+ if (ctrl->value)
+ data = reg_set(client, RJ54N1_MIRROR_STILL_MODE, 0, 1);
+ else
+ data = reg_set(client, RJ54N1_MIRROR_STILL_MODE, 1, 1);
+ if (data < 0)
+ return -EIO;
+ break;
+ case V4L2_CID_HFLIP:
+ if (ctrl->value)
+ data = reg_set(client, RJ54N1_MIRROR_STILL_MODE, 0, 2);
+ else
+ data = reg_set(client, RJ54N1_MIRROR_STILL_MODE, 2, 2);
+ if (data < 0)
+ return -EIO;
+ break;
+ case V4L2_CID_GAIN:
+ if (ctrl->value > qctrl->maximum ||
+ ctrl->value < qctrl->minimum)
+ return -EINVAL;
+ else if (reg_write(client, RJ54N1_Y_GAIN, ctrl->value * 2) < 0)
+ return -EIO;
+ break;
+ }
+
+ return 0;
+}
+
+static struct v4l2_subdev_core_ops rj54n1_subdev_core_ops = {
+ .g_ctrl = rj54n1_g_ctrl,
+ .s_ctrl = rj54n1_s_ctrl,
+ .g_chip_ident = rj54n1_g_chip_ident,
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+ .g_register = rj54n1_g_register,
+ .s_register = rj54n1_s_register,
+#endif
+};
+
+static struct v4l2_subdev_video_ops rj54n1_subdev_video_ops = {
+ .s_stream = rj54n1_s_stream,
+ .s_fmt = rj54n1_s_fmt,
+ .g_fmt = rj54n1_g_fmt,
+ .try_fmt = rj54n1_try_fmt,
+ .g_crop = rj54n1_g_crop,
+ .cropcap = rj54n1_cropcap,
+};
+
+static struct v4l2_subdev_ops rj54n1_subdev_ops = {
+ .core = &rj54n1_subdev_core_ops,
+ .video = &rj54n1_subdev_video_ops,
+};
+
+static int rj54n1_pin_config(struct i2c_client *client)
+{
+ /*
+ * Experimentally found out IOCTRL wired to 0. TODO: add to platform
+ * data: 0 or 1 << 7.
+ */
+ return reg_write(client, RJ54N1_IOC, 0);
+}
+
+/*
+ * Interface active, can use i2c. If it fails, it can indeed mean, that
+ * this wasn't our capture interface, so, we wait for the right one
+ */
+static int rj54n1_video_probe(struct soc_camera_device *icd,
+ struct i2c_client *client)
+{
+ int data1, data2;
+ int ret;
+
+ /* This could be a BUG_ON() or a WARN_ON(), or remove it completely */
+ if (!icd->dev.parent ||
+ to_soc_camera_host(icd->dev.parent)->nr != icd->iface)
+ return -ENODEV;
+
+ /* Read out the chip version register */
+ data1 = reg_read(client, RJ54N1_DEV_CODE);
+ data2 = reg_read(client, RJ54N1_DEV_CODE2);
+
+ if (data1 != 0x51 || data2 != 0x10) {
+ ret = -ENODEV;
+ dev_info(&client->dev, "No RJ54N1CB0C found, read 0x%x:0x%x\n",
+ data1, data2);
+ goto ei2c;
+ }
+
+ ret = rj54n1_pin_config(client);
+ if (ret < 0)
+ goto ei2c;
+
+ dev_info(&client->dev, "Detected a RJ54N1CB0C chip ID 0x%x:0x%x\n",
+ data1, data2);
+
+ei2c:
+ return ret;
+}
+
+static int rj54n1_probe(struct i2c_client *client,
+ const struct i2c_device_id *did)
+{
+ struct rj54n1 *rj54n1;
+ struct soc_camera_device *icd = client->dev.platform_data;
+ struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
+ struct soc_camera_link *icl;
+ int ret;
+
+ if (!icd) {
+ dev_err(&client->dev, "RJ54N1CB0C: missing soc-camera data!\n");
+ return -EINVAL;
+ }
+
+ icl = to_soc_camera_link(icd);
+ if (!icl) {
+ dev_err(&client->dev, "RJ54N1CB0C: missing platform data!\n");
+ return -EINVAL;
+ }
+
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
+ dev_warn(&adapter->dev,
+ "I2C-Adapter doesn't support I2C_FUNC_SMBUS_BYTE\n");
+ return -EIO;
+ }
+
+ rj54n1 = kzalloc(sizeof(struct rj54n1), GFP_KERNEL);
+ if (!rj54n1)
+ return -ENOMEM;
+
+ v4l2_i2c_subdev_init(&rj54n1->subdev, client, &rj54n1_subdev_ops);
+
+ icd->ops = &rj54n1_ops;
+
+ rj54n1->clk_div = clk_div;
+ rj54n1->rect.left = RJ54N1_COLUMN_SKIP;
+ rj54n1->rect.top = RJ54N1_ROW_SKIP;
+ rj54n1->rect.width = RJ54N1_MAX_WIDTH;
+ rj54n1->rect.height = RJ54N1_MAX_HEIGHT;
+ rj54n1->width = RJ54N1_MAX_WIDTH;
+ rj54n1->height = RJ54N1_MAX_HEIGHT;
+ rj54n1->fourcc = V4L2_PIX_FMT_YUYV;
+ rj54n1->resize = 1024;
+
+ ret = rj54n1_video_probe(icd, client);
+ if (ret < 0) {
+ icd->ops = NULL;
+ i2c_set_clientdata(client, NULL);
+ kfree(rj54n1);
+ return ret;
+ }
+
+ icd->formats = rj54n1_colour_formats;
+ icd->num_formats = ARRAY_SIZE(rj54n1_colour_formats);
+
+ return ret;
+}
+
+static int rj54n1_remove(struct i2c_client *client)
+{
+ struct rj54n1 *rj54n1 = to_rj54n1(client);
+ struct soc_camera_device *icd = client->dev.platform_data;
+ struct soc_camera_link *icl = to_soc_camera_link(icd);
+
+ icd->ops = NULL;
+ if (icl->free_bus)
+ icl->free_bus(icl);
+ i2c_set_clientdata(client, NULL);
+ client->driver = NULL;
+ kfree(rj54n1);
+
+ return 0;
+}
+
+static const struct i2c_device_id rj54n1_id[] = {
+ { "rj54n1cb0c", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, rj54n1_id);
+
+static struct i2c_driver rj54n1_i2c_driver = {
+ .driver = {
+ .name = "rj54n1cb0c",
+ },
+ .probe = rj54n1_probe,
+ .remove = rj54n1_remove,
+ .id_table = rj54n1_id,
+};
+
+static int __init rj54n1_mod_init(void)
+{
+ return i2c_add_driver(&rj54n1_i2c_driver);
+}
+
+static void __exit rj54n1_mod_exit(void)
+{
+ i2c_del_driver(&rj54n1_i2c_driver);
+}
+
+module_init(rj54n1_mod_init);
+module_exit(rj54n1_mod_exit);
+
+MODULE_DESCRIPTION("Sharp RJ54N1CB0C Camera driver");
+MODULE_AUTHOR("Guennadi Liakhovetski <g.liakhovetski@gmx.de>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/media/video/s2255drv.c b/drivers/media/video/s2255drv.c
index 2c0bb06..41765f3 100644
--- a/drivers/media/video/s2255drv.c
+++ b/drivers/media/video/s2255drv.c
@@ -1958,7 +1958,7 @@
if (pdword[1] >= MAX_CHANNELS)
break;
cc = G_chnmap[pdword[1]];
- if (!(cc >= 0 && cc < MAX_CHANNELS))
+ if (cc >= MAX_CHANNELS)
break;
switch (pdword[2]) {
case S2255_RESPONSE_SETMODE:
@@ -1980,7 +1980,7 @@
wake_up(&dev->fw_data->wait_fw);
break;
default:
- printk(KERN_INFO "s2255 unknwn resp\n");
+ printk(KERN_INFO "s2255 unknown resp\n");
}
default:
pdata++;
diff --git a/drivers/media/video/saa7110.c b/drivers/media/video/saa7110.c
index 5c24c99..3bca744 100644
--- a/drivers/media/video/saa7110.c
+++ b/drivers/media/video/saa7110.c
@@ -304,7 +304,7 @@
{
struct saa7110 *decoder = to_saa7110(sd);
- if (input < 0 || input >= SAA7110_MAX_INPUT) {
+ if (input >= SAA7110_MAX_INPUT) {
v4l2_dbg(1, debug, sd, "input=%d not available\n", input);
return -EINVAL;
}
diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c
index 0901322..7e40d6d 100644
--- a/drivers/media/video/saa7134/saa7134-cards.c
+++ b/drivers/media/video/saa7134/saa7134-cards.c
@@ -5239,6 +5239,7 @@
.radio_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
+ .mpeg = SAA7134_MPEG_DVB,
.inputs = { {
.name = name_tv,
.vmux = 2,
@@ -5279,6 +5280,46 @@
.amux = TV,
},
},
+ [SAA7134_BOARD_ASUS_EUROPA_HYBRID] = {
+ .name = "Asus Europa Hybrid OEM",
+ .audio_clock = 0x00187de7,
+ .tuner_type = TUNER_PHILIPS_TD1316,
+ .radio_type = UNSET,
+ .tuner_addr = 0x61,
+ .radio_addr = ADDR_UNSET,
+ .tda9887_conf = TDA9887_PRESENT | TDA9887_PORT1_ACTIVE,
+ .mpeg = SAA7134_MPEG_DVB,
+ .inputs = { {
+ .name = name_tv,
+ .vmux = 3,
+ .amux = TV,
+ .tv = 1,
+ }, {
+ .name = name_comp1,
+ .vmux = 4,
+ .amux = LINE2,
+ }, {
+ .name = name_svideo,
+ .vmux = 8,
+ .amux = LINE2,
+ } },
+ },
+ [SAA7134_BOARD_LEADTEK_WINFAST_DTV1000S] = {
+ .name = "Leadtek Winfast DTV1000S",
+ .audio_clock = 0x00187de7,
+ .tuner_type = TUNER_PHILIPS_TDA8290,
+ .radio_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .radio_addr = ADDR_UNSET,
+ .mpeg = SAA7134_MPEG_DVB,
+ .inputs = { {
+ .name = name_comp1,
+ .vmux = 3,
+ }, {
+ .name = name_svideo,
+ .vmux = 8,
+ } },
+ },
};
@@ -6418,6 +6459,18 @@
.subdevice = 0x2004,
.driver_data = SAA7134_BOARD_ZOLID_HYBRID_PCI,
}, {
+ .vendor = PCI_VENDOR_ID_PHILIPS,
+ .device = PCI_DEVICE_ID_PHILIPS_SAA7134,
+ .subvendor = 0x1043,
+ .subdevice = 0x4847,
+ .driver_data = SAA7134_BOARD_ASUS_EUROPA_HYBRID,
+ }, {
+ .vendor = PCI_VENDOR_ID_PHILIPS,
+ .device = PCI_DEVICE_ID_PHILIPS_SAA7130,
+ .subvendor = 0x107d,
+ .subdevice = 0x6655,
+ .driver_data = SAA7134_BOARD_LEADTEK_WINFAST_DTV1000S,
+ }, {
/* --- boards without eeprom + subsystem ID --- */
.vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7134,
@@ -6748,6 +6801,7 @@
case SAA7134_BOARD_KWORLD_PLUS_TV_ANALOG:
case SAA7134_BOARD_AVERMEDIA_GO_007_FM_PLUS:
case SAA7134_BOARD_ROVERMEDIA_LINK_PRO_FM:
+ case SAA7134_BOARD_LEADTEK_WINFAST_DTV1000S:
dev->has_remote = SAA7134_REMOTE_GPIO;
break;
case SAA7134_BOARD_FLYDVBS_LR300:
@@ -7079,6 +7133,7 @@
/* break intentionally omitted */
case SAA7134_BOARD_VIDEOMATE_DVBT_300:
case SAA7134_BOARD_ASUS_EUROPA2_HYBRID:
+ case SAA7134_BOARD_ASUS_EUROPA_HYBRID:
{
/* The Philips EUROPA based hybrid boards have the tuner
diff --git a/drivers/media/video/saa7134/saa7134-core.c b/drivers/media/video/saa7134/saa7134-core.c
index f87757f..0ba7f5a 100644
--- a/drivers/media/video/saa7134/saa7134-core.c
+++ b/drivers/media/video/saa7134/saa7134-core.c
@@ -1032,7 +1032,7 @@
saa7134_irq_video_signalchange(dev);
if (TUNER_ABSENT != dev->tuner_type)
- saa_call_all(dev, tuner, s_standby);
+ saa_call_all(dev, core, s_power, 0);
/* register v4l devices */
if (saa7134_no_overlay > 0)
@@ -1319,7 +1319,7 @@
#endif
};
-static int saa7134_init(void)
+static int __init saa7134_init(void)
{
INIT_LIST_HEAD(&saa7134_devlist);
printk(KERN_INFO "saa7130/34: v4l2 driver version %d.%d.%d loaded\n",
@@ -1333,7 +1333,7 @@
return pci_register_driver(&saa7134_pci_driver);
}
-static void saa7134_fini(void)
+static void __exit saa7134_fini(void)
{
pci_unregister_driver(&saa7134_pci_driver);
}
diff --git a/drivers/media/video/saa7134/saa7134-dvb.c b/drivers/media/video/saa7134/saa7134-dvb.c
index a26e997..73739d2 100644
--- a/drivers/media/video/saa7134/saa7134-dvb.c
+++ b/drivers/media/video/saa7134/saa7134-dvb.c
@@ -40,6 +40,7 @@
#include "tda1004x.h"
#include "nxt200x.h"
#include "tuner-xc2028.h"
+#include "xc5000.h"
#include "tda10086.h"
#include "tda826x.h"
@@ -871,6 +872,20 @@
.disable_i2c_gate_ctrl = 1,
};
+static struct xc5000_config behold_x7_tunerconfig = {
+ .i2c_address = 0xc2>>1,
+ .if_khz = 4560,
+ .radio_input = XC5000_RADIO_FM1,
+};
+
+static struct zl10353_config behold_x7_config = {
+ .demod_address = 0x1e>>1,
+ .if2 = 45600,
+ .no_tuner = 1,
+ .parallel_ts = 1,
+ .disable_i2c_gate_ctrl = 1,
+};
+
/* ==================================================================
* tda10086 based DVB-S cards, helper functions
*/
@@ -1030,6 +1045,32 @@
.gate = TDA18271_GATE_ANALOG,
};
+static struct tda10048_config dtv1000s_tda10048_config = {
+ .demod_address = 0x10 >> 1,
+ .output_mode = TDA10048_PARALLEL_OUTPUT,
+ .fwbulkwritelen = TDA10048_BULKWRITE_200,
+ .inversion = TDA10048_INVERSION_ON,
+ .dtv6_if_freq_khz = TDA10048_IF_3300,
+ .dtv7_if_freq_khz = TDA10048_IF_3800,
+ .dtv8_if_freq_khz = TDA10048_IF_4300,
+ .clk_freq_khz = TDA10048_CLK_16000,
+ .disable_gate_access = 1,
+};
+
+static struct tda18271_std_map dtv1000s_tda18271_std_map = {
+ .dvbt_6 = { .if_freq = 3300, .agc_mode = 3, .std = 4,
+ .if_lvl = 1, .rfagc_top = 0x37, },
+ .dvbt_7 = { .if_freq = 3800, .agc_mode = 3, .std = 5,
+ .if_lvl = 1, .rfagc_top = 0x37, },
+ .dvbt_8 = { .if_freq = 4300, .agc_mode = 3, .std = 6,
+ .if_lvl = 1, .rfagc_top = 0x37, },
+};
+
+static struct tda18271_config dtv1000s_tda18271_config = {
+ .std_map = &dtv1000s_tda18271_std_map,
+ .gate = TDA18271_GATE_ANALOG,
+};
+
/* ==================================================================
* Core code
*/
@@ -1116,6 +1157,7 @@
break;
case SAA7134_BOARD_PHILIPS_EUROPA:
case SAA7134_BOARD_VIDEOMATE_DVBT_300:
+ case SAA7134_BOARD_ASUS_EUROPA_HYBRID:
fe0->dvb.frontend = dvb_attach(tda10046_attach,
&philips_europa_config,
&dev->i2c_adap);
@@ -1482,6 +1524,15 @@
TUNER_PHILIPS_FMD1216MEX_MK3);
}
break;
+ case SAA7134_BOARD_BEHOLD_X7:
+ fe0->dvb.frontend = dvb_attach(zl10353_attach,
+ &behold_x7_config,
+ &dev->i2c_adap);
+ if (fe0->dvb.frontend) {
+ dvb_attach(xc5000_attach, fe0->dvb.frontend,
+ &dev->i2c_adap, &behold_x7_tunerconfig);
+ }
+ break;
case SAA7134_BOARD_AVERMEDIA_A700_PRO:
case SAA7134_BOARD_AVERMEDIA_A700_HYBRID:
/* Zarlink ZL10313 */
@@ -1518,6 +1569,19 @@
&zolid_tda18271_config);
}
break;
+ case SAA7134_BOARD_LEADTEK_WINFAST_DTV1000S:
+ fe0->dvb.frontend = dvb_attach(tda10048_attach,
+ &dtv1000s_tda10048_config,
+ &dev->i2c_adap);
+ if (fe0->dvb.frontend != NULL) {
+ dvb_attach(tda829x_attach, fe0->dvb.frontend,
+ &dev->i2c_adap, 0x4b,
+ &tda829x_no_probe);
+ dvb_attach(tda18271_attach, fe0->dvb.frontend,
+ 0x60, &dev->i2c_adap,
+ &dtv1000s_tda18271_config);
+ }
+ break;
default:
wprintk("Huh? unknown DVB card?\n");
break;
@@ -1550,7 +1614,7 @@
/* register everything else */
ret = videobuf_dvb_register_bus(&dev->frontends, THIS_MODULE, dev,
- &dev->pci->dev, adapter_nr, 0);
+ &dev->pci->dev, adapter_nr, 0, NULL);
/* this sequence is necessary to make the tda1004x load its firmware
* and to enter analog mode of hybrid boards
diff --git a/drivers/media/video/saa7134/saa7134-input.c b/drivers/media/video/saa7134/saa7134-input.c
index a0e8c62..744918b 100644
--- a/drivers/media/video/saa7134/saa7134-input.c
+++ b/drivers/media/video/saa7134/saa7134-input.c
@@ -102,14 +102,14 @@
if (data == ir->mask_keycode)
ir_input_nokey(ir->dev, &ir->ir);
else
- ir_input_keydown(ir->dev, &ir->ir, data, data);
+ ir_input_keydown(ir->dev, &ir->ir, data);
return 0;
}
if (ir->polling) {
if ((ir->mask_keydown && (0 != (gpio & ir->mask_keydown))) ||
(ir->mask_keyup && (0 == (gpio & ir->mask_keyup)))) {
- ir_input_keydown(ir->dev, &ir->ir, data, data);
+ ir_input_keydown(ir->dev, &ir->ir, data);
} else {
ir_input_nokey(ir->dev, &ir->ir);
}
@@ -117,7 +117,7 @@
else { /* IRQ driven mode - handle key press and release in one go */
if ((ir->mask_keydown && (0 != (gpio & ir->mask_keydown))) ||
(ir->mask_keyup && (0 == (gpio & ir->mask_keyup)))) {
- ir_input_keydown(ir->dev, &ir->ir, data, data);
+ ir_input_keydown(ir->dev, &ir->ir, data);
ir_input_nokey(ir->dev, &ir->ir);
}
}
@@ -616,6 +616,12 @@
mask_keycode = 0x003f00;
mask_keydown = 0x040000;
break;
+ case SAA7134_BOARD_LEADTEK_WINFAST_DTV1000S:
+ ir_codes = &ir_codes_winfast_table;
+ mask_keycode = 0x5f00;
+ mask_keyup = 0x020000;
+ polling = 50; /* ms */
+ break;
}
if (NULL == ir_codes) {
printk("%s: Oops: IR config error [card=%d]\n",
@@ -646,7 +652,10 @@
snprintf(ir->phys, sizeof(ir->phys), "pci-%s/ir0",
pci_name(dev->pci));
- ir_input_init(input_dev, &ir->ir, ir_type, ir_codes);
+ err = ir_input_init(input_dev, &ir->ir, ir_type, ir_codes);
+ if (err < 0)
+ goto err_out_free;
+
input_dev->name = ir->name;
input_dev->phys = ir->phys;
input_dev->id.bustype = BUS_PCI;
@@ -677,6 +686,7 @@
saa7134_ir_stop(dev);
dev->remote = NULL;
err_out_free:
+ ir_input_free(input_dev);
input_free_device(input_dev);
kfree(ir);
return err;
@@ -688,6 +698,7 @@
return;
saa7134_ir_stop(dev);
+ ir_input_free(dev->remote->dev);
input_unregister_device(dev->remote->dev);
kfree(dev->remote);
dev->remote = NULL;
@@ -695,10 +706,7 @@
void saa7134_probe_i2c_ir(struct saa7134_dev *dev)
{
- const unsigned short addr_list[] = {
- 0x7a, 0x47, 0x71, 0x2d,
- I2C_CLIENT_END
- };
+ struct i2c_board_info info;
struct i2c_msg msg_msi = {
.addr = 0x50,
@@ -714,9 +722,9 @@
return;
}
- memset(&dev->info, 0, sizeof(dev->info));
+ memset(&info, 0, sizeof(struct i2c_board_info));
memset(&dev->init_data, 0, sizeof(dev->init_data));
- strlcpy(dev->info.type, "ir_video", I2C_NAME_SIZE);
+ strlcpy(info.type, "ir_video", I2C_NAME_SIZE);
switch (dev->board) {
case SAA7134_BOARD_PINNACLE_PCTV_110i:
@@ -725,23 +733,24 @@
if (pinnacle_remote == 0) {
dev->init_data.get_key = get_key_pinnacle_color;
dev->init_data.ir_codes = &ir_codes_pinnacle_color_table;
- dev->info.addr = 0x47;
+ info.addr = 0x47;
} else {
dev->init_data.get_key = get_key_pinnacle_grey;
dev->init_data.ir_codes = &ir_codes_pinnacle_grey_table;
- dev->info.addr = 0x47;
+ info.addr = 0x47;
}
break;
case SAA7134_BOARD_UPMOST_PURPLE_TV:
dev->init_data.name = "Purple TV";
dev->init_data.get_key = get_key_purpletv;
dev->init_data.ir_codes = &ir_codes_purpletv_table;
+ info.addr = 0x7a;
break;
case SAA7134_BOARD_MSI_TVATANYWHERE_PLUS:
dev->init_data.name = "MSI TV@nywhere Plus";
dev->init_data.get_key = get_key_msi_tvanywhere_plus;
dev->init_data.ir_codes = &ir_codes_msi_tvanywhere_plus_table;
- dev->info.addr = 0x30;
+ info.addr = 0x30;
/* MSI TV@nywhere Plus controller doesn't seem to
respond to probes unless we read something from
an existing device. Weird...
@@ -755,6 +764,7 @@
dev->init_data.name = "HVR 1110";
dev->init_data.get_key = get_key_hvr1110;
dev->init_data.ir_codes = &ir_codes_hauppauge_new_table;
+ info.addr = 0x71;
break;
case SAA7134_BOARD_BEHOLD_607FM_MK3:
case SAA7134_BOARD_BEHOLD_607FM_MK5:
@@ -772,23 +782,20 @@
dev->init_data.name = "BeholdTV";
dev->init_data.get_key = get_key_beholdm6xx;
dev->init_data.ir_codes = &ir_codes_behold_table;
+ info.addr = 0x2d;
break;
case SAA7134_BOARD_AVERMEDIA_CARDBUS_501:
case SAA7134_BOARD_AVERMEDIA_CARDBUS_506:
- dev->info.addr = 0x40;
+ info.addr = 0x40;
break;
- }
-
- if (dev->init_data.name)
- dev->info.platform_data = &dev->init_data;
- /* No need to probe if address is known */
- if (dev->info.addr) {
- i2c_new_device(&dev->i2c_adap, &dev->info);
+ default:
+ dprintk("No I2C IR support for board %x\n", dev->board);
return;
}
- /* Address not known, fallback to probing */
- i2c_new_probed_device(&dev->i2c_adap, &dev->info, addr_list);
+ if (dev->init_data.name)
+ info.platform_data = &dev->init_data;
+ i2c_new_device(&dev->i2c_adap, &info);
}
static int saa7134_rc5_irq(struct saa7134_dev *dev)
@@ -936,7 +943,7 @@
dprintk("scancode = 0x%02x (code = 0x%02x, notcode= 0x%02x)\n",
ir->code, ircode, not_code);
- ir_input_keydown(ir->dev, &ir->ir, ir->code, ir->code);
+ ir_input_keydown(ir->dev, &ir->ir, ir->code);
} else
dprintk("Repeat last key\n");
diff --git a/drivers/media/video/saa7134/saa7134-video.c b/drivers/media/video/saa7134/saa7134-video.c
index da26f47..35f8daa 100644
--- a/drivers/media/video/saa7134/saa7134-video.c
+++ b/drivers/media/video/saa7134/saa7134-video.c
@@ -1499,7 +1499,7 @@
saa_andorb(SAA7134_OFMT_DATA_A, 0x1f, 0);
saa_andorb(SAA7134_OFMT_DATA_B, 0x1f, 0);
- saa_call_all(dev, tuner, s_standby);
+ saa_call_all(dev, core, s_power, 0);
if (fh->radio)
saa_call_all(dev, core, ioctl, RDS_CMD_CLOSE, &cmd);
diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h
index f8697d4..53b7e0b 100644
--- a/drivers/media/video/saa7134/saa7134.h
+++ b/drivers/media/video/saa7134/saa7134.h
@@ -297,6 +297,8 @@
#define SAA7134_BOARD_BEHOLD_X7 171
#define SAA7134_BOARD_ROVERMEDIA_LINK_PRO_FM 172
#define SAA7134_BOARD_ZOLID_HYBRID_PCI 173
+#define SAA7134_BOARD_ASUS_EUROPA_HYBRID 174
+#define SAA7134_BOARD_LEADTEK_WINFAST_DTV1000S 175
#define SAA7134_MAXBOARDS 32
#define SAA7134_INPUT_MAX 8
@@ -592,7 +594,6 @@
unsigned int insuspend;
/* I2C keyboard data */
- struct i2c_board_info info;
struct IR_i2c_init_data init_data;
/* SAA7134_MPEG_* */
diff --git a/drivers/media/video/saa7164/saa7164-core.c b/drivers/media/video/saa7164/saa7164-core.c
index 709affc..e6aa0fb 100644
--- a/drivers/media/video/saa7164/saa7164-core.c
+++ b/drivers/media/video/saa7164/saa7164-core.c
@@ -724,13 +724,13 @@
.resume = NULL,
};
-static int saa7164_init(void)
+static int __init saa7164_init(void)
{
printk(KERN_INFO "saa7164 driver loaded\n");
return pci_register_driver(&saa7164_pci_driver);
}
-static void saa7164_fini(void)
+static void __exit saa7164_fini(void)
{
pci_unregister_driver(&saa7164_pci_driver);
}
diff --git a/drivers/media/video/saa7164/saa7164-dvb.c b/drivers/media/video/saa7164/saa7164-dvb.c
index 6a2d847..cf099c5 100644
--- a/drivers/media/video/saa7164/saa7164-dvb.c
+++ b/drivers/media/video/saa7164/saa7164-dvb.c
@@ -68,6 +68,7 @@
.std_map = &hauppauge_tda18271_std_map,
.gate = TDA18271_GATE_ANALOG,
.role = TDA18271_SLAVE,
+ .output_opt = TDA18271_OUTPUT_LT_OFF,
.rf_cal_on_startup = 1
};
diff --git a/drivers/media/video/saa717x.c b/drivers/media/video/saa717x.c
index b15c409..6818df5 100644
--- a/drivers/media/video/saa717x.c
+++ b/drivers/media/video/saa717x.c
@@ -1115,7 +1115,7 @@
v4l2_dbg(1, debug, sd, "decoder set input (%d)\n", input);
/* inputs from 0-9 are available*/
/* saa717x have mode0-mode9 but mode5 is reserved. */
- if (input < 0 || input > 9 || input == 5)
+ if (input > 9 || input == 5)
return -EINVAL;
if (decoder->input != input) {
@@ -1312,7 +1312,7 @@
"MONO", "STEREO", "LANG1", "LANG2/SAP"
};
- audio_mode = V4L2_TUNER_MODE_STEREO;
+ audio_mode = TUNER_AUDIO_STEREO;
switch (vt->audmode) {
case V4L2_TUNER_MODE_MONO:
diff --git a/drivers/media/video/sh_mobile_ceu_camera.c b/drivers/media/video/sh_mobile_ceu_camera.c
index 9c8b7c7..a4f3472 100644
--- a/drivers/media/video/sh_mobile_ceu_camera.c
+++ b/drivers/media/video/sh_mobile_ceu_camera.c
@@ -153,6 +153,40 @@
return ioread32(priv->base + reg_offs);
}
+static int sh_mobile_ceu_soft_reset(struct sh_mobile_ceu_dev *pcdev)
+{
+ int i, success = 0;
+ struct soc_camera_device *icd = pcdev->icd;
+
+ ceu_write(pcdev, CAPSR, 1 << 16); /* reset */
+
+ /* wait CSTSR.CPTON bit */
+ for (i = 0; i < 1000; i++) {
+ if (!(ceu_read(pcdev, CSTSR) & 1)) {
+ success++;
+ break;
+ }
+ udelay(1);
+ }
+
+ /* wait CAPSR.CPKIL bit */
+ for (i = 0; i < 1000; i++) {
+ if (!(ceu_read(pcdev, CAPSR) & (1 << 16))) {
+ success++;
+ break;
+ }
+ udelay(1);
+ }
+
+
+ if (2 != success) {
+ dev_warn(&icd->dev, "soft reset time out\n");
+ return -EIO;
+ }
+
+ return 0;
+}
+
/*
* Videobuf operations
*/
@@ -202,26 +236,45 @@
#define CEU_CETCR_MAGIC 0x0317f313 /* acknowledge magical interrupt sources */
#define CEU_CETCR_IGRW (1 << 4) /* prohibited register access interrupt bit */
#define CEU_CEIER_CPEIE (1 << 0) /* one-frame capture end interrupt */
+#define CEU_CEIER_VBP (1 << 20) /* vbp error */
#define CEU_CAPCR_CTNCP (1 << 16) /* continuous capture mode (if set) */
+#define CEU_CEIER_MASK (CEU_CEIER_CPEIE | CEU_CEIER_VBP)
-static void sh_mobile_ceu_capture(struct sh_mobile_ceu_dev *pcdev)
+/*
+ * return value doesn't reflex the success/failure to queue the new buffer,
+ * but rather the status of the previous buffer.
+ */
+static int sh_mobile_ceu_capture(struct sh_mobile_ceu_dev *pcdev)
{
struct soc_camera_device *icd = pcdev->icd;
dma_addr_t phys_addr_top, phys_addr_bottom;
+ u32 status;
+ int ret = 0;
/* The hardware is _very_ picky about this sequence. Especially
* the CEU_CETCR_MAGIC value. It seems like we need to acknowledge
* several not-so-well documented interrupt sources in CETCR.
*/
- ceu_write(pcdev, CEIER, ceu_read(pcdev, CEIER) & ~CEU_CEIER_CPEIE);
- ceu_write(pcdev, CETCR, ~ceu_read(pcdev, CETCR) & CEU_CETCR_MAGIC);
- ceu_write(pcdev, CEIER, ceu_read(pcdev, CEIER) | CEU_CEIER_CPEIE);
+ ceu_write(pcdev, CEIER, ceu_read(pcdev, CEIER) & ~CEU_CEIER_MASK);
+ status = ceu_read(pcdev, CETCR);
+ ceu_write(pcdev, CETCR, ~status & CEU_CETCR_MAGIC);
+ ceu_write(pcdev, CEIER, ceu_read(pcdev, CEIER) | CEU_CEIER_MASK);
ceu_write(pcdev, CAPCR, ceu_read(pcdev, CAPCR) & ~CEU_CAPCR_CTNCP);
ceu_write(pcdev, CETCR, CEU_CETCR_MAGIC ^ CEU_CETCR_IGRW);
+ /*
+ * When a VBP interrupt occurs, a capture end interrupt does not occur
+ * and the image of that frame is not captured correctly. So, soft reset
+ * is needed here.
+ */
+ if (status & CEU_CEIER_VBP) {
+ sh_mobile_ceu_soft_reset(pcdev);
+ ret = -EIO;
+ }
+
if (!pcdev->active)
- return;
+ return ret;
phys_addr_top = videobuf_to_dma_contig(pcdev->active);
ceu_write(pcdev, CDAYR, phys_addr_top);
@@ -247,6 +300,8 @@
pcdev->active->state = VIDEOBUF_ACTIVE;
ceu_write(pcdev, CAPSR, 0x1); /* start capture */
+
+ return ret;
}
static int sh_mobile_ceu_videobuf_prepare(struct videobuf_queue *vq,
@@ -319,6 +374,11 @@
list_add_tail(&vb->queue, &pcdev->capture);
if (!pcdev->active) {
+ /*
+ * Because there were no active buffer at this moment,
+ * we are not interested in the return value of
+ * sh_mobile_ceu_capture here.
+ */
pcdev->active = vb;
sh_mobile_ceu_capture(pcdev);
}
@@ -379,9 +439,8 @@
else
pcdev->active = NULL;
- sh_mobile_ceu_capture(pcdev);
-
- vb->state = VIDEOBUF_DONE;
+ vb->state = (sh_mobile_ceu_capture(pcdev) < 0) ?
+ VIDEOBUF_ERROR : VIDEOBUF_DONE;
do_gettimeofday(&vb->ts);
vb->field_count++;
wake_up(&vb->done);
@@ -407,13 +466,9 @@
pm_runtime_get_sync(ici->v4l2_dev.dev);
- ceu_write(pcdev, CAPSR, 1 << 16); /* reset */
- while (ceu_read(pcdev, CSTSR) & 1)
- msleep(1);
-
pcdev->icd = icd;
- return 0;
+ return sh_mobile_ceu_soft_reset(pcdev);
}
/* Called with .video_lock held */
@@ -427,7 +482,7 @@
/* disable capture, disable interrupts */
ceu_write(pcdev, CEIER, 0);
- ceu_write(pcdev, CAPSR, 1 << 16); /* reset */
+ sh_mobile_ceu_soft_reset(pcdev);
/* make sure active buffer is canceled */
spin_lock_irqsave(&pcdev->lock, flags);
diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c
index aba92e2..5b3eaa1 100644
--- a/drivers/media/video/tuner-core.c
+++ b/drivers/media/video/tuner-core.c
@@ -320,6 +320,7 @@
struct dvb_tuner_ops *fe_tuner_ops = &t->fe.ops.tuner_ops;
struct analog_demod_ops *analog_ops = &t->fe.ops.analog_ops;
unsigned char buffer[4];
+ int tune_now = 1;
if (type == UNSET || type == TUNER_ABSENT) {
tuner_dbg ("tuner 0x%02x: Tuner type absent\n",c->addr);
@@ -328,7 +329,7 @@
t->type = type;
/* prevent invalid config values */
- t->config = ((new_config >= 0) && (new_config < 256)) ? new_config : 0;
+ t->config = new_config < 256 ? new_config : 0;
if (tuner_callback != NULL) {
tuner_dbg("defining GPIO callback\n");
t->fe.callback = tuner_callback;
@@ -404,6 +405,7 @@
};
if (!dvb_attach(xc2028_attach, &t->fe, &cfg))
goto attach_failed;
+ tune_now = 0;
break;
}
case TUNER_TDA9887:
@@ -419,6 +421,7 @@
if (!dvb_attach(xc5000_attach,
&t->fe, t->i2c->adapter, &xc5000_cfg))
goto attach_failed;
+ tune_now = 0;
break;
}
case TUNER_NXP_TDA18271:
@@ -430,6 +433,7 @@
if (!dvb_attach(tda18271_attach, &t->fe, t->i2c->addr,
t->i2c->adapter, &cfg))
goto attach_failed;
+ tune_now = 0;
break;
}
default:
@@ -458,12 +462,13 @@
if (t->mode_mask == T_UNINITIALIZED)
t->mode_mask = new_mode_mask;
- /* xc2028/3028 and xc5000 requires a firmware to be set-up later
+ /* Some tuners require more initialization setup before use,
+ such as firmware download or device calibration.
trying to set a frequency here will just fail
FIXME: better to move set_freq to the tuner code. This is needed
on analog tuners for PLL to properly work
*/
- if (t->type != TUNER_XC2028 && t->type != TUNER_XC5000)
+ if (tune_now)
set_freq(c, (V4L2_TUNER_RADIO == t->mode) ?
t->radio_freq : t->tv_freq);
@@ -752,14 +757,17 @@
return 0;
}
-static int tuner_s_standby(struct v4l2_subdev *sd)
+static int tuner_s_power(struct v4l2_subdev *sd, int on)
{
struct tuner *t = to_tuner(sd);
struct analog_demod_ops *analog_ops = &t->fe.ops.analog_ops;
+ if (on)
+ return 0;
+
tuner_dbg("Putting tuner to sleep\n");
- if (check_mode(t, "s_standby") == -EINVAL)
+ if (check_mode(t, "s_power") == -EINVAL)
return 0;
t->mode = T_STANDBY;
if (analog_ops->standby)
@@ -961,6 +969,7 @@
static const struct v4l2_subdev_core_ops tuner_core_ops = {
.log_status = tuner_log_status,
.s_std = tuner_s_std,
+ .s_power = tuner_s_power,
};
static const struct v4l2_subdev_tuner_ops tuner_tuner_ops = {
@@ -971,7 +980,6 @@
.g_frequency = tuner_g_frequency,
.s_type_addr = tuner_s_type_addr,
.s_config = tuner_s_config,
- .s_standby = tuner_s_standby,
};
static const struct v4l2_subdev_ops tuner_ops = {
diff --git a/drivers/media/video/tvaudio.c b/drivers/media/video/tvaudio.c
index 0869baf..800fc1b 100644
--- a/drivers/media/video/tvaudio.c
+++ b/drivers/media/video/tvaudio.c
@@ -1919,7 +1919,7 @@
.s_radio = tvaudio_s_radio,
.s_frequency = tvaudio_s_frequency,
.s_tuner = tvaudio_s_tuner,
- .s_tuner = tvaudio_g_tuner,
+ .g_tuner = tvaudio_g_tuner,
};
static const struct v4l2_subdev_audio_ops tvaudio_audio_ops = {
diff --git a/drivers/media/video/tvp514x.c b/drivers/media/video/tvp514x.c
index 2443726..26b4e71 100644
--- a/drivers/media/video/tvp514x.c
+++ b/drivers/media/video/tvp514x.c
@@ -272,7 +272,7 @@
read_again:
err = i2c_smbus_read_byte_data(client, reg);
- if (err == -1) {
+ if (err < 0) {
if (retry <= I2C_RETRY_COUNT) {
v4l2_warn(sd, "Read: retry ... %d\n", retry);
retry++;
diff --git a/drivers/media/video/usbvideo/konicawc.c b/drivers/media/video/usbvideo/konicawc.c
index 31d57f2..a0addcb 100644
--- a/drivers/media/video/usbvideo/konicawc.c
+++ b/drivers/media/video/usbvideo/konicawc.c
@@ -225,7 +225,7 @@
int error;
usb_make_path(dev, cam->input_physname, sizeof(cam->input_physname));
- strncat(cam->input_physname, "/input0", sizeof(cam->input_physname));
+ strlcat(cam->input_physname, "/input0", sizeof(cam->input_physname));
cam->input = input_dev = input_allocate_device();
if (!input_dev) {
diff --git a/drivers/media/video/usbvideo/quickcam_messenger.c b/drivers/media/video/usbvideo/quickcam_messenger.c
index 803d3e4..c4d1b96 100644
--- a/drivers/media/video/usbvideo/quickcam_messenger.c
+++ b/drivers/media/video/usbvideo/quickcam_messenger.c
@@ -89,7 +89,7 @@
int error;
usb_make_path(dev, cam->input_physname, sizeof(cam->input_physname));
- strncat(cam->input_physname, "/input0", sizeof(cam->input_physname));
+ strlcat(cam->input_physname, "/input0", sizeof(cam->input_physname));
cam->input = input_dev = input_allocate_device();
if (!input_dev) {
diff --git a/drivers/media/video/usbvision/usbvision-video.c b/drivers/media/video/usbvision/usbvision-video.c
index a2a50d6..c07b0ac 100644
--- a/drivers/media/video/usbvision/usbvision-video.c
+++ b/drivers/media/video/usbvision/usbvision-video.c
@@ -601,7 +601,7 @@
{
struct usb_usbvision *usbvision = video_drvdata(file);
- if ((input >= usbvision->video_inputs) || (input < 0) )
+ if (input >= usbvision->video_inputs)
return -EINVAL;
mutex_lock(&usbvision->lock);
diff --git a/drivers/media/video/uvc/uvc_ctrl.c b/drivers/media/video/uvc/uvc_ctrl.c
index 1b89735..0469d7a 100644
--- a/drivers/media/video/uvc/uvc_ctrl.c
+++ b/drivers/media/video/uvc/uvc_ctrl.c
@@ -742,17 +742,7 @@
v4l2_id &= V4L2_CTRL_ID_MASK;
/* Find the control. */
- __uvc_find_control(chain->processing, v4l2_id, mapping, &ctrl, next);
- if (ctrl && !next)
- return ctrl;
-
- list_for_each_entry(entity, &chain->iterms, chain) {
- __uvc_find_control(entity, v4l2_id, mapping, &ctrl, next);
- if (ctrl && !next)
- return ctrl;
- }
-
- list_for_each_entry(entity, &chain->extensions, chain) {
+ list_for_each_entry(entity, &chain->entities, chain) {
__uvc_find_control(entity, v4l2_id, mapping, &ctrl, next);
if (ctrl && !next)
return ctrl;
@@ -826,6 +816,13 @@
ret = 0;
goto out;
+ case V4L2_CTRL_TYPE_BUTTON:
+ v4l2_ctrl->minimum = 0;
+ v4l2_ctrl->maximum = 0;
+ v4l2_ctrl->step = 0;
+ ret = 0;
+ goto out;
+
default:
break;
}
@@ -944,17 +941,7 @@
int ret = 0;
/* Find the control. */
- ret = uvc_ctrl_commit_entity(chain->dev, chain->processing, rollback);
- if (ret < 0)
- goto done;
-
- list_for_each_entry(entity, &chain->iterms, chain) {
- ret = uvc_ctrl_commit_entity(chain->dev, entity, rollback);
- if (ret < 0)
- goto done;
- }
-
- list_for_each_entry(entity, &chain->extensions, chain) {
+ list_for_each_entry(entity, &chain->entities, chain) {
ret = uvc_ctrl_commit_entity(chain->dev, entity, rollback);
if (ret < 0)
goto done;
@@ -1068,8 +1055,9 @@
int ret;
/* Find the extension unit. */
- list_for_each_entry(entity, &chain->extensions, chain) {
- if (entity->id == xctrl->unit)
+ list_for_each_entry(entity, &chain->entities, chain) {
+ if (UVC_ENTITY_TYPE(entity) == UVC_VC_EXTENSION_UNIT &&
+ entity->id == xctrl->unit)
break;
}
diff --git a/drivers/media/video/uvc/uvc_driver.c b/drivers/media/video/uvc/uvc_driver.c
index 8756be5..c31bc50 100644
--- a/drivers/media/video/uvc/uvc_driver.c
+++ b/drivers/media/video/uvc/uvc_driver.c
@@ -46,6 +46,7 @@
unsigned int uvc_no_drop_param;
static unsigned int uvc_quirks_param;
unsigned int uvc_trace_param;
+unsigned int uvc_timeout_param = UVC_CTRL_STREAMING_TIMEOUT;
/* ------------------------------------------------------------------------
* Video formats
@@ -248,29 +249,9 @@
entity = list_entry(&dev->entities, struct uvc_entity, list);
list_for_each_entry_continue(entity, &dev->entities, list) {
- switch (UVC_ENTITY_TYPE(entity)) {
- case UVC_TT_STREAMING:
- if (entity->output.bSourceID == id)
+ for (i = 0; i < entity->bNrInPins; ++i)
+ if (entity->baSourceID[i] == id)
return entity;
- break;
-
- case UVC_VC_PROCESSING_UNIT:
- if (entity->processing.bSourceID == id)
- return entity;
- break;
-
- case UVC_VC_SELECTOR_UNIT:
- for (i = 0; i < entity->selector.bNrInPins; ++i)
- if (entity->selector.baSourceID[i] == id)
- return entity;
- break;
-
- case UVC_VC_EXTENSION_UNIT:
- for (i = 0; i < entity->extension.bNrInPins; ++i)
- if (entity->extension.baSourceID[i] == id)
- return entity;
- break;
- }
}
return NULL;
@@ -426,7 +407,8 @@
/* Parse the frame descriptors. Only uncompressed, MJPEG and frame
* based formats have frame descriptors.
*/
- while (buflen > 2 && buffer[2] == ftype) {
+ while (buflen > 2 && buffer[1] == USB_DT_CS_INTERFACE &&
+ buffer[2] == ftype) {
frame = &format->frame[format->nframes];
if (ftype != UVC_VS_FRAME_FRAME_BASED)
n = buflen > 25 ? buffer[25] : 0;
@@ -503,12 +485,14 @@
buffer += buffer[0];
}
- if (buflen > 2 && buffer[2] == UVC_VS_STILL_IMAGE_FRAME) {
+ if (buflen > 2 && buffer[1] == USB_DT_CS_INTERFACE &&
+ buffer[2] == UVC_VS_STILL_IMAGE_FRAME) {
buflen -= buffer[0];
buffer += buffer[0];
}
- if (buflen > 2 && buffer[2] == UVC_VS_COLORFORMAT) {
+ if (buflen > 2 && buffer[1] == USB_DT_CS_INTERFACE &&
+ buffer[2] == UVC_VS_COLORFORMAT) {
if (buflen < 6) {
uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming "
"interface %d COLORFORMAT error\n",
@@ -749,6 +733,11 @@
buffer += buffer[0];
}
+ if (buflen)
+ uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming interface "
+ "%d has %u bytes of trailing descriptor garbage.\n",
+ dev->udev->devnum, alts->desc.bInterfaceNumber, buflen);
+
/* Parse the alternate settings to find the maximum bandwidth. */
for (i = 0; i < intf->num_altsetting; ++i) {
struct usb_host_endpoint *ep;
@@ -776,6 +765,28 @@
return ret;
}
+static struct uvc_entity *uvc_alloc_entity(u16 type, u8 id,
+ unsigned int num_pads, unsigned int extra_size)
+{
+ struct uvc_entity *entity;
+ unsigned int num_inputs;
+ unsigned int size;
+
+ num_inputs = (type & UVC_TERM_OUTPUT) ? num_pads : num_pads - 1;
+ size = sizeof(*entity) + extra_size + num_inputs;
+ entity = kzalloc(size, GFP_KERNEL);
+ if (entity == NULL)
+ return NULL;
+
+ entity->id = id;
+ entity->type = type;
+
+ entity->bNrInPins = num_inputs;
+ entity->baSourceID = ((__u8 *)entity) + sizeof(*entity) + extra_size;
+
+ return entity;
+}
+
/* Parse vendor-specific extensions. */
static int uvc_parse_vendor_control(struct uvc_device *dev,
const unsigned char *buffer, int buflen)
@@ -827,21 +838,18 @@
break;
}
- unit = kzalloc(sizeof *unit + p + 2*n, GFP_KERNEL);
+ unit = uvc_alloc_entity(UVC_VC_EXTENSION_UNIT, buffer[3],
+ p + 1, 2*n);
if (unit == NULL)
return -ENOMEM;
- unit->id = buffer[3];
- unit->type = UVC_VC_EXTENSION_UNIT;
memcpy(unit->extension.guidExtensionCode, &buffer[4], 16);
unit->extension.bNumControls = buffer[20];
- unit->extension.bNrInPins = get_unaligned_le16(&buffer[21]);
- unit->extension.baSourceID = (__u8 *)unit + sizeof *unit;
- memcpy(unit->extension.baSourceID, &buffer[22], p);
+ memcpy(unit->baSourceID, &buffer[22], p);
unit->extension.bControlSize = buffer[22+p];
- unit->extension.bmControls = (__u8 *)unit + sizeof *unit + p;
- unit->extension.bmControlsType = (__u8 *)unit + sizeof *unit
- + p + n;
+ unit->extension.bmControls = (__u8 *)unit + sizeof(*unit);
+ unit->extension.bmControlsType = (__u8 *)unit + sizeof(*unit)
+ + n;
memcpy(unit->extension.bmControls, &buffer[23+p], 2*n);
if (buffer[24+p+2*n] != 0)
@@ -938,13 +946,11 @@
return -EINVAL;
}
- term = kzalloc(sizeof *term + n + p, GFP_KERNEL);
+ term = uvc_alloc_entity(type | UVC_TERM_INPUT, buffer[3],
+ 1, n + p);
if (term == NULL)
return -ENOMEM;
- term->id = buffer[3];
- term->type = type | UVC_TERM_INPUT;
-
if (UVC_ENTITY_TYPE(term) == UVC_ITT_CAMERA) {
term->camera.bControlSize = n;
term->camera.bmControls = (__u8 *)term + sizeof *term;
@@ -999,13 +1005,12 @@
return 0;
}
- term = kzalloc(sizeof *term, GFP_KERNEL);
+ term = uvc_alloc_entity(type | UVC_TERM_OUTPUT, buffer[3],
+ 1, 0);
if (term == NULL)
return -ENOMEM;
- term->id = buffer[3];
- term->type = type | UVC_TERM_OUTPUT;
- term->output.bSourceID = buffer[7];
+ memcpy(term->baSourceID, &buffer[7], 1);
if (buffer[8] != 0)
usb_string(udev, buffer[8], term->name,
@@ -1026,15 +1031,11 @@
return -EINVAL;
}
- unit = kzalloc(sizeof *unit + p, GFP_KERNEL);
+ unit = uvc_alloc_entity(buffer[2], buffer[3], p + 1, 0);
if (unit == NULL)
return -ENOMEM;
- unit->id = buffer[3];
- unit->type = buffer[2];
- unit->selector.bNrInPins = buffer[4];
- unit->selector.baSourceID = (__u8 *)unit + sizeof *unit;
- memcpy(unit->selector.baSourceID, &buffer[5], p);
+ memcpy(unit->baSourceID, &buffer[5], p);
if (buffer[5+p] != 0)
usb_string(udev, buffer[5+p], unit->name,
@@ -1056,13 +1057,11 @@
return -EINVAL;
}
- unit = kzalloc(sizeof *unit + n, GFP_KERNEL);
+ unit = uvc_alloc_entity(buffer[2], buffer[3], 2, n);
if (unit == NULL)
return -ENOMEM;
- unit->id = buffer[3];
- unit->type = buffer[2];
- unit->processing.bSourceID = buffer[4];
+ memcpy(unit->baSourceID, &buffer[4], 1);
unit->processing.wMaxMultiplier =
get_unaligned_le16(&buffer[5]);
unit->processing.bControlSize = buffer[7];
@@ -1091,19 +1090,15 @@
return -EINVAL;
}
- unit = kzalloc(sizeof *unit + p + n, GFP_KERNEL);
+ unit = uvc_alloc_entity(buffer[2], buffer[3], p + 1, n);
if (unit == NULL)
return -ENOMEM;
- unit->id = buffer[3];
- unit->type = buffer[2];
memcpy(unit->extension.guidExtensionCode, &buffer[4], 16);
unit->extension.bNumControls = buffer[20];
- unit->extension.bNrInPins = get_unaligned_le16(&buffer[21]);
- unit->extension.baSourceID = (__u8 *)unit + sizeof *unit;
- memcpy(unit->extension.baSourceID, &buffer[22], p);
+ memcpy(unit->baSourceID, &buffer[22], p);
unit->extension.bControlSize = buffer[22+p];
- unit->extension.bmControls = (__u8 *)unit + sizeof *unit + p;
+ unit->extension.bmControls = (__u8 *)unit + sizeof *unit;
memcpy(unit->extension.bmControls, &buffer[23+p], n);
if (buffer[23+p+n] != 0)
@@ -1209,13 +1204,12 @@
if (uvc_trace_param & UVC_TRACE_PROBE)
printk(" <- XU %d", entity->id);
- if (entity->extension.bNrInPins != 1) {
+ if (entity->bNrInPins != 1) {
uvc_trace(UVC_TRACE_DESCR, "Extension unit %d has more "
"than 1 input pin.\n", entity->id);
return -1;
}
- list_add_tail(&entity->chain, &chain->extensions);
break;
case UVC_VC_PROCESSING_UNIT:
@@ -1236,7 +1230,7 @@
printk(" <- SU %d", entity->id);
/* Single-input selector units are ignored. */
- if (entity->selector.bNrInPins == 1)
+ if (entity->bNrInPins == 1)
break;
if (chain->selector != NULL) {
@@ -1254,20 +1248,17 @@
if (uvc_trace_param & UVC_TRACE_PROBE)
printk(" <- IT %d\n", entity->id);
- list_add_tail(&entity->chain, &chain->iterms);
break;
case UVC_TT_STREAMING:
- if (uvc_trace_param & UVC_TRACE_PROBE)
- printk(" <- IT %d\n", entity->id);
-
- if (!UVC_ENTITY_IS_ITERM(entity)) {
- uvc_trace(UVC_TRACE_DESCR, "Unsupported input "
- "terminal %u.\n", entity->id);
- return -1;
+ if (UVC_ENTITY_IS_ITERM(entity)) {
+ if (uvc_trace_param & UVC_TRACE_PROBE)
+ printk(" <- IT %d\n", entity->id);
+ } else {
+ if (uvc_trace_param & UVC_TRACE_PROBE)
+ printk(" OT %d", entity->id);
}
- list_add_tail(&entity->chain, &chain->iterms);
break;
default:
@@ -1276,6 +1267,7 @@
return -1;
}
+ list_add_tail(&entity->chain, &chain->entities);
return 0;
}
@@ -1299,14 +1291,14 @@
switch (UVC_ENTITY_TYPE(forward)) {
case UVC_VC_EXTENSION_UNIT:
- if (forward->extension.bNrInPins != 1) {
+ if (forward->bNrInPins != 1) {
uvc_trace(UVC_TRACE_DESCR, "Extension unit %d "
"has more than 1 input pin.\n",
entity->id);
return -EINVAL;
}
- list_add_tail(&forward->chain, &chain->extensions);
+ list_add_tail(&forward->chain, &chain->entities);
if (uvc_trace_param & UVC_TRACE_PROBE) {
if (!found)
printk(" (->");
@@ -1326,7 +1318,7 @@
return -EINVAL;
}
- list_add_tail(&forward->chain, &chain->oterms);
+ list_add_tail(&forward->chain, &chain->entities);
if (uvc_trace_param & UVC_TRACE_PROBE) {
if (!found)
printk(" (->");
@@ -1344,24 +1336,22 @@
}
static int uvc_scan_chain_backward(struct uvc_video_chain *chain,
- struct uvc_entity *entity)
+ struct uvc_entity **_entity)
{
+ struct uvc_entity *entity = *_entity;
struct uvc_entity *term;
- int id = -1, i;
+ int id = -EINVAL, i;
switch (UVC_ENTITY_TYPE(entity)) {
case UVC_VC_EXTENSION_UNIT:
- id = entity->extension.baSourceID[0];
- break;
-
case UVC_VC_PROCESSING_UNIT:
- id = entity->processing.bSourceID;
+ id = entity->baSourceID[0];
break;
case UVC_VC_SELECTOR_UNIT:
/* Single-input selector units are ignored. */
- if (entity->selector.bNrInPins == 1) {
- id = entity->selector.baSourceID[0];
+ if (entity->bNrInPins == 1) {
+ id = entity->baSourceID[0];
break;
}
@@ -1369,8 +1359,8 @@
printk(" <- IT");
chain->selector = entity;
- for (i = 0; i < entity->selector.bNrInPins; ++i) {
- id = entity->selector.baSourceID[i];
+ for (i = 0; i < entity->bNrInPins; ++i) {
+ id = entity->baSourceID[i];
term = uvc_entity_by_id(chain->dev, id);
if (term == NULL || !UVC_ENTITY_IS_ITERM(term)) {
uvc_trace(UVC_TRACE_DESCR, "Selector unit %d "
@@ -1382,7 +1372,7 @@
if (uvc_trace_param & UVC_TRACE_PROBE)
printk(" %d", term->id);
- list_add_tail(&term->chain, &chain->iterms);
+ list_add_tail(&term->chain, &chain->entities);
uvc_scan_chain_forward(chain, term, entity);
}
@@ -1391,34 +1381,49 @@
id = 0;
break;
+
+ case UVC_ITT_VENDOR_SPECIFIC:
+ case UVC_ITT_CAMERA:
+ case UVC_ITT_MEDIA_TRANSPORT_INPUT:
+ case UVC_OTT_VENDOR_SPECIFIC:
+ case UVC_OTT_DISPLAY:
+ case UVC_OTT_MEDIA_TRANSPORT_OUTPUT:
+ case UVC_TT_STREAMING:
+ id = UVC_ENTITY_IS_OTERM(entity) ? entity->baSourceID[0] : 0;
+ break;
}
- return id;
+ if (id <= 0) {
+ *_entity = NULL;
+ return id;
+ }
+
+ entity = uvc_entity_by_id(chain->dev, id);
+ if (entity == NULL) {
+ uvc_trace(UVC_TRACE_DESCR, "Found reference to "
+ "unknown entity %d.\n", id);
+ return -EINVAL;
+ }
+
+ *_entity = entity;
+ return 0;
}
static int uvc_scan_chain(struct uvc_video_chain *chain,
- struct uvc_entity *oterm)
+ struct uvc_entity *term)
{
struct uvc_entity *entity, *prev;
- int id;
- entity = oterm;
- list_add_tail(&entity->chain, &chain->oterms);
- uvc_trace(UVC_TRACE_PROBE, "Scanning UVC chain: OT %d", entity->id);
+ uvc_trace(UVC_TRACE_PROBE, "Scanning UVC chain:");
- id = entity->output.bSourceID;
- while (id != 0) {
- prev = entity;
- entity = uvc_entity_by_id(chain->dev, id);
- if (entity == NULL) {
- uvc_trace(UVC_TRACE_DESCR, "Found reference to "
- "unknown entity %d.\n", id);
- return -EINVAL;
- }
+ entity = term;
+ prev = NULL;
+ while (entity != NULL) {
+ /* Entity must not be part of an existing chain */
if (entity->chain.next || entity->chain.prev) {
uvc_trace(UVC_TRACE_DESCR, "Found reference to "
- "entity %d already in chain.\n", id);
+ "entity %d already in chain.\n", entity->id);
return -EINVAL;
}
@@ -1430,34 +1435,34 @@
if (uvc_scan_chain_forward(chain, entity, prev) < 0)
return -EINVAL;
- /* Stop when a terminal is found. */
- if (UVC_ENTITY_IS_TERM(entity))
- break;
-
/* Backward scan */
- id = uvc_scan_chain_backward(chain, entity);
- if (id < 0)
- return id;
+ prev = entity;
+ if (uvc_scan_chain_backward(chain, &entity) < 0)
+ return -EINVAL;
}
return 0;
}
-static unsigned int uvc_print_terms(struct list_head *terms, char *buffer)
+static unsigned int uvc_print_terms(struct list_head *terms, u16 dir,
+ char *buffer)
{
struct uvc_entity *term;
unsigned int nterms = 0;
char *p = buffer;
list_for_each_entry(term, terms, chain) {
- p += sprintf(p, "%u", term->id);
- if (term->chain.next != terms) {
+ if (!UVC_ENTITY_IS_TERM(term) ||
+ UVC_TERM_DIRECTION(term) != dir)
+ continue;
+
+ if (nterms)
p += sprintf(p, ",");
- if (++nterms >= 4) {
- p += sprintf(p, "...");
- break;
- }
+ if (++nterms >= 4) {
+ p += sprintf(p, "...");
+ break;
}
+ p += sprintf(p, "%u", term->id);
}
return p - buffer;
@@ -1468,9 +1473,9 @@
static char buffer[43];
char *p = buffer;
- p += uvc_print_terms(&chain->iterms, p);
+ p += uvc_print_terms(&chain->entities, UVC_TERM_INPUT, p);
p += sprintf(p, " -> ");
- uvc_print_terms(&chain->oterms, p);
+ uvc_print_terms(&chain->entities, UVC_TERM_OUTPUT, p);
return buffer;
}
@@ -1501,9 +1506,7 @@
if (chain == NULL)
return -ENOMEM;
- INIT_LIST_HEAD(&chain->iterms);
- INIT_LIST_HEAD(&chain->oterms);
- INIT_LIST_HEAD(&chain->extensions);
+ INIT_LIST_HEAD(&chain->entities);
mutex_init(&chain->ctrl_mutex);
chain->dev = dev;
@@ -1531,22 +1534,92 @@
*/
/*
+ * Delete the UVC device.
+ *
+ * Called by the kernel when the last reference to the uvc_device structure
+ * is released.
+ *
+ * As this function is called after or during disconnect(), all URBs have
+ * already been canceled by the USB core. There is no need to kill the
+ * interrupt URB manually.
+ */
+static void uvc_delete(struct uvc_device *dev)
+{
+ struct list_head *p, *n;
+
+ usb_put_intf(dev->intf);
+ usb_put_dev(dev->udev);
+
+ uvc_status_cleanup(dev);
+ uvc_ctrl_cleanup_device(dev);
+
+ list_for_each_safe(p, n, &dev->chains) {
+ struct uvc_video_chain *chain;
+ chain = list_entry(p, struct uvc_video_chain, list);
+ kfree(chain);
+ }
+
+ list_for_each_safe(p, n, &dev->entities) {
+ struct uvc_entity *entity;
+ entity = list_entry(p, struct uvc_entity, list);
+ kfree(entity);
+ }
+
+ list_for_each_safe(p, n, &dev->streams) {
+ struct uvc_streaming *streaming;
+ streaming = list_entry(p, struct uvc_streaming, list);
+ usb_driver_release_interface(&uvc_driver.driver,
+ streaming->intf);
+ usb_put_intf(streaming->intf);
+ kfree(streaming->format);
+ kfree(streaming->header.bmaControls);
+ kfree(streaming);
+ }
+
+ kfree(dev);
+}
+
+static void uvc_release(struct video_device *vdev)
+{
+ struct uvc_streaming *stream = video_get_drvdata(vdev);
+ struct uvc_device *dev = stream->dev;
+
+ video_device_release(vdev);
+
+ /* Decrement the registered streams count and delete the device when it
+ * reaches zero.
+ */
+ if (atomic_dec_and_test(&dev->nstreams))
+ uvc_delete(dev);
+}
+
+/*
* Unregister the video devices.
*/
static void uvc_unregister_video(struct uvc_device *dev)
{
struct uvc_streaming *stream;
+ /* Unregistering all video devices might result in uvc_delete() being
+ * called from inside the loop if there's no open file handle. To avoid
+ * that, increment the stream count before iterating over the streams
+ * and decrement it when done.
+ */
+ atomic_inc(&dev->nstreams);
+
list_for_each_entry(stream, &dev->streams, list) {
if (stream->vdev == NULL)
continue;
- if (stream->vdev->minor == -1)
- video_device_release(stream->vdev);
- else
- video_unregister_device(stream->vdev);
+ video_unregister_device(stream->vdev);
stream->vdev = NULL;
}
+
+ /* Decrement the stream count and call uvc_delete explicitly if there
+ * are no stream left.
+ */
+ if (atomic_dec_and_test(&dev->nstreams))
+ uvc_delete(dev);
}
static int uvc_register_video(struct uvc_device *dev,
@@ -1580,7 +1653,7 @@
vdev->parent = &dev->intf->dev;
vdev->minor = -1;
vdev->fops = &uvc_fops;
- vdev->release = video_device_release;
+ vdev->release = uvc_release;
strlcpy(vdev->name, dev->name, sizeof vdev->name);
/* Set the driver data before calling video_register_device, otherwise
@@ -1598,6 +1671,7 @@
return ret;
}
+ atomic_inc(&dev->nstreams);
return 0;
}
@@ -1605,13 +1679,13 @@
* Register all video devices in all chains.
*/
static int uvc_register_terms(struct uvc_device *dev,
- struct uvc_video_chain *chain, struct list_head *terms)
+ struct uvc_video_chain *chain)
{
struct uvc_streaming *stream;
struct uvc_entity *term;
int ret;
- list_for_each_entry(term, terms, chain) {
+ list_for_each_entry(term, &chain->entities, chain) {
if (UVC_ENTITY_TYPE(term) != UVC_TT_STREAMING)
continue;
@@ -1637,11 +1711,7 @@
int ret;
list_for_each_entry(chain, &dev->chains, list) {
- ret = uvc_register_terms(dev, chain, &chain->iterms);
- if (ret < 0)
- return ret;
-
- ret = uvc_register_terms(dev, chain, &chain->oterms);
+ ret = uvc_register_terms(dev, chain);
if (ret < 0)
return ret;
}
@@ -1653,61 +1723,6 @@
* USB probe, disconnect, suspend and resume
*/
-/*
- * Delete the UVC device.
- *
- * Called by the kernel when the last reference to the uvc_device structure
- * is released.
- *
- * Unregistering the video devices is done here because every opened instance
- * must be closed before the device can be unregistered. An alternative would
- * have been to use another reference count for uvc_v4l2_open/uvc_release, and
- * unregister the video devices on disconnect when that reference count drops
- * to zero.
- *
- * As this function is called after or during disconnect(), all URBs have
- * already been canceled by the USB core. There is no need to kill the
- * interrupt URB manually.
- */
-void uvc_delete(struct kref *kref)
-{
- struct uvc_device *dev = container_of(kref, struct uvc_device, kref);
- struct list_head *p, *n;
-
- /* Unregister the video devices. */
- uvc_unregister_video(dev);
- usb_put_intf(dev->intf);
- usb_put_dev(dev->udev);
-
- uvc_status_cleanup(dev);
- uvc_ctrl_cleanup_device(dev);
-
- list_for_each_safe(p, n, &dev->chains) {
- struct uvc_video_chain *chain;
- chain = list_entry(p, struct uvc_video_chain, list);
- kfree(chain);
- }
-
- list_for_each_safe(p, n, &dev->entities) {
- struct uvc_entity *entity;
- entity = list_entry(p, struct uvc_entity, list);
- kfree(entity);
- }
-
- list_for_each_safe(p, n, &dev->streams) {
- struct uvc_streaming *streaming;
- streaming = list_entry(p, struct uvc_streaming, list);
- usb_driver_release_interface(&uvc_driver.driver,
- streaming->intf);
- usb_put_intf(streaming->intf);
- kfree(streaming->format);
- kfree(streaming->header.bmaControls);
- kfree(streaming);
- }
-
- kfree(dev);
-}
-
static int uvc_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
@@ -1730,7 +1745,7 @@
INIT_LIST_HEAD(&dev->entities);
INIT_LIST_HEAD(&dev->chains);
INIT_LIST_HEAD(&dev->streams);
- kref_init(&dev->kref);
+ atomic_set(&dev->nstreams, 0);
atomic_set(&dev->users, 0);
dev->udev = usb_get_dev(udev);
@@ -1792,7 +1807,7 @@
return 0;
error:
- kref_put(&dev->kref, uvc_delete);
+ uvc_unregister_video(dev);
return -ENODEV;
}
@@ -1809,21 +1824,9 @@
UVC_SC_VIDEOSTREAMING)
return;
- /* uvc_v4l2_open() might race uvc_disconnect(). A static driver-wide
- * lock is needed to prevent uvc_disconnect from releasing its
- * reference to the uvc_device instance after uvc_v4l2_open() received
- * the pointer to the device (video_devdata) but before it got the
- * chance to increase the reference count (kref_get).
- *
- * Note that the reference can't be released with the lock held,
- * otherwise a AB-BA deadlock can occur with videodev_lock that
- * videodev acquires in videodev_open() and video_unregister_device().
- */
- mutex_lock(&uvc_driver.open_mutex);
dev->state |= UVC_DEV_DISCONNECTED;
- mutex_unlock(&uvc_driver.open_mutex);
- kref_put(&dev->kref, uvc_delete);
+ uvc_unregister_video(dev);
}
static int uvc_suspend(struct usb_interface *intf, pm_message_t message)
@@ -1899,6 +1902,15 @@
* though they are compliant.
*/
static struct usb_device_id uvc_ids[] = {
+ /* Genius eFace 2025 */
+ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE
+ | USB_DEVICE_ID_MATCH_INT_INFO,
+ .idVendor = 0x0458,
+ .idProduct = 0x706e,
+ .bInterfaceClass = USB_CLASS_VIDEO,
+ .bInterfaceSubClass = 1,
+ .bInterfaceProtocol = 0,
+ .driver_info = UVC_QUIRK_PROBE_MINMAX },
/* Microsoft Lifecam NX-6000 */
{ .match_flags = USB_DEVICE_ID_MATCH_DEVICE
| USB_DEVICE_ID_MATCH_INT_INFO,
@@ -2123,6 +2135,15 @@
.bInterfaceSubClass = 1,
.bInterfaceProtocol = 0,
.driver_info = UVC_QUIRK_STATUS_INTERVAL },
+ /* MSI StarCam 370i */
+ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE
+ | USB_DEVICE_ID_MATCH_INT_INFO,
+ .idVendor = 0x1b3b,
+ .idProduct = 0x2951,
+ .bInterfaceClass = USB_CLASS_VIDEO,
+ .bInterfaceSubClass = 1,
+ .bInterfaceProtocol = 0,
+ .driver_info = UVC_QUIRK_PROBE_MINMAX },
/* SiGma Micro USB Web Camera */
{ .match_flags = USB_DEVICE_ID_MATCH_DEVICE
| USB_DEVICE_ID_MATCH_INT_INFO,
@@ -2159,7 +2180,6 @@
INIT_LIST_HEAD(&uvc_driver.devices);
INIT_LIST_HEAD(&uvc_driver.controls);
- mutex_init(&uvc_driver.open_mutex);
mutex_init(&uvc_driver.ctrl_mutex);
uvc_ctrl_init();
@@ -2184,6 +2204,8 @@
MODULE_PARM_DESC(quirks, "Forced device quirks");
module_param_named(trace, uvc_trace_param, uint, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(trace, "Trace level bitmask");
+module_param_named(timeout, uvc_timeout_param, uint, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(timeout, "Streaming control requests timeout");
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/media/video/uvc/uvc_v4l2.c b/drivers/media/video/uvc/uvc_v4l2.c
index a2bdd80..23239a4 100644
--- a/drivers/media/video/uvc/uvc_v4l2.c
+++ b/drivers/media/video/uvc/uvc_v4l2.c
@@ -364,37 +364,30 @@
* unprivileged state. Only a single instance can be in a privileged state at
* a given time. Trying to perform an operation that requires privileges will
* automatically acquire the required privileges if possible, or return -EBUSY
- * otherwise. Privileges are dismissed when closing the instance.
+ * otherwise. Privileges are dismissed when closing the instance or when
+ * freeing the video buffers using VIDIOC_REQBUFS.
*
* Operations that require privileges are:
*
* - VIDIOC_S_INPUT
* - VIDIOC_S_PARM
* - VIDIOC_S_FMT
- * - VIDIOC_TRY_FMT
* - VIDIOC_REQBUFS
*/
static int uvc_acquire_privileges(struct uvc_fh *handle)
{
- int ret = 0;
-
/* Always succeed if the handle is already privileged. */
if (handle->state == UVC_HANDLE_ACTIVE)
return 0;
/* Check if the device already has a privileged handle. */
- mutex_lock(&uvc_driver.open_mutex);
if (atomic_inc_return(&handle->stream->active) != 1) {
atomic_dec(&handle->stream->active);
- ret = -EBUSY;
- goto done;
+ return -EBUSY;
}
handle->state = UVC_HANDLE_ACTIVE;
-
-done:
- mutex_unlock(&uvc_driver.open_mutex);
- return ret;
+ return 0;
}
static void uvc_dismiss_privileges(struct uvc_fh *handle)
@@ -421,24 +414,20 @@
int ret = 0;
uvc_trace(UVC_TRACE_CALLS, "uvc_v4l2_open\n");
- mutex_lock(&uvc_driver.open_mutex);
stream = video_drvdata(file);
- if (stream->dev->state & UVC_DEV_DISCONNECTED) {
- ret = -ENODEV;
- goto done;
- }
+ if (stream->dev->state & UVC_DEV_DISCONNECTED)
+ return -ENODEV;
ret = usb_autopm_get_interface(stream->dev->intf);
if (ret < 0)
- goto done;
+ return ret;
/* Create the device handle. */
handle = kzalloc(sizeof *handle, GFP_KERNEL);
if (handle == NULL) {
usb_autopm_put_interface(stream->dev->intf);
- ret = -ENOMEM;
- goto done;
+ return -ENOMEM;
}
if (atomic_inc_return(&stream->dev->users) == 1) {
@@ -447,7 +436,7 @@
usb_autopm_put_interface(stream->dev->intf);
atomic_dec(&stream->dev->users);
kfree(handle);
- goto done;
+ return ret;
}
}
@@ -456,11 +445,7 @@
handle->state = UVC_HANDLE_PASSIVE;
file->private_data = handle;
- kref_get(&stream->dev->kref);
-
-done:
- mutex_unlock(&uvc_driver.open_mutex);
- return ret;
+ return 0;
}
static int uvc_v4l2_release(struct file *file)
@@ -490,7 +475,6 @@
uvc_status_stop(stream->dev);
usb_autopm_put_interface(stream->dev->intf);
- kref_put(&stream->dev->kref, uvc_delete);
return 0;
}
@@ -636,12 +620,16 @@
(chain->dev->quirks & UVC_QUIRK_IGNORE_SELECTOR_UNIT)) {
if (index != 0)
return -EINVAL;
- iterm = list_first_entry(&chain->iterms,
- struct uvc_entity, chain);
+ list_for_each_entry(iterm, &chain->entities, chain) {
+ if (UVC_ENTITY_IS_ITERM(iterm))
+ break;
+ }
pin = iterm->id;
- } else if (pin < selector->selector.bNrInPins) {
- pin = selector->selector.baSourceID[index];
- list_for_each_entry(iterm, chain->iterms.next, chain) {
+ } else if (pin < selector->bNrInPins) {
+ pin = selector->baSourceID[index];
+ list_for_each_entry(iterm, &chain->entities, chain) {
+ if (!UVC_ENTITY_IS_ITERM(iterm))
+ continue;
if (iterm->id == pin)
break;
}
@@ -692,7 +680,7 @@
break;
}
- if (input == 0 || input > chain->selector->selector.bNrInPins)
+ if (input == 0 || input > chain->selector->bNrInPins)
return -EINVAL;
return uvc_query_ctrl(chain->dev, UVC_SET_CUR,
@@ -731,9 +719,6 @@
{
struct uvc_streaming_control probe;
- if ((ret = uvc_acquire_privileges(handle)) < 0)
- return ret;
-
return uvc_v4l2_try_format(stream, arg, &probe, NULL, NULL);
}
@@ -888,6 +873,9 @@
if (ret < 0)
return ret;
+ if (ret == 0)
+ uvc_dismiss_privileges(handle);
+
rb->count = ret;
ret = 0;
break;
@@ -1051,7 +1039,7 @@
size_t count, loff_t *ppos)
{
uvc_trace(UVC_TRACE_CALLS, "uvc_v4l2_read: not implemented.\n");
- return -ENODEV;
+ return -EINVAL;
}
/*
diff --git a/drivers/media/video/uvc/uvc_video.c b/drivers/media/video/uvc/uvc_video.c
index a6e41d1..05139a4 100644
--- a/drivers/media/video/uvc/uvc_video.c
+++ b/drivers/media/video/uvc/uvc_video.c
@@ -135,7 +135,7 @@
ret = __uvc_query_ctrl(stream->dev, query, 0, stream->intfnum,
probe ? UVC_VS_PROBE_CONTROL : UVC_VS_COMMIT_CONTROL, data,
- size, UVC_CTRL_STREAMING_TIMEOUT);
+ size, uvc_timeout_param);
if ((query == UVC_GET_MIN || query == UVC_GET_MAX) && ret == 2) {
/* Some cameras, mostly based on Bison Electronics chipsets,
@@ -239,7 +239,7 @@
ret = __uvc_query_ctrl(stream->dev, UVC_SET_CUR, 0, stream->intfnum,
probe ? UVC_VS_PROBE_CONTROL : UVC_VS_COMMIT_CONTROL, data,
- size, UVC_CTRL_STREAMING_TIMEOUT);
+ size, uvc_timeout_param);
if (ret != size) {
uvc_printk(KERN_ERR, "Failed to set UVC %s control : "
"%d (exp. %u).\n", probe ? "probe" : "commit",
@@ -770,8 +770,9 @@
/* Retry allocations until one succeed. */
for (; npackets > 1; npackets /= 2) {
for (i = 0; i < UVC_URBS; ++i) {
+ stream->urb_size = psize * npackets;
stream->urb_buffer[i] = usb_buffer_alloc(
- stream->dev->udev, psize * npackets,
+ stream->dev->udev, stream->urb_size,
gfp_flags | __GFP_NOWARN, &stream->urb_dma[i]);
if (!stream->urb_buffer[i]) {
uvc_free_urb_buffers(stream);
@@ -780,11 +781,15 @@
}
if (i == UVC_URBS) {
- stream->urb_size = psize * npackets;
+ uvc_trace(UVC_TRACE_VIDEO, "Allocated %u URB buffers "
+ "of %ux%u bytes each.\n", UVC_URBS, npackets,
+ psize);
return npackets;
}
}
+ uvc_trace(UVC_TRACE_VIDEO, "Failed to allocate URB buffers (%u bytes "
+ "per packet).\n", psize);
return 0;
}
@@ -935,10 +940,12 @@
bandwidth = stream->ctrl.dwMaxPayloadTransferSize;
if (bandwidth == 0) {
- uvc_printk(KERN_WARNING, "device %s requested null "
- "bandwidth, defaulting to lowest.\n",
- stream->dev->name);
+ uvc_trace(UVC_TRACE_VIDEO, "Device requested null "
+ "bandwidth, defaulting to lowest.\n");
bandwidth = 1;
+ } else {
+ uvc_trace(UVC_TRACE_VIDEO, "Device requested %u "
+ "B/frame bandwidth.\n", bandwidth);
}
for (i = 0; i < intf->num_altsetting; ++i) {
@@ -955,8 +962,11 @@
break;
}
- if (i >= intf->num_altsetting)
+ if (i >= intf->num_altsetting) {
+ uvc_trace(UVC_TRACE_VIDEO, "No fast enough alt setting "
+ "for requested bandwidth.\n");
return -EIO;
+ }
ret = usb_set_interface(stream->dev->udev, intfnum, i);
if (ret < 0)
diff --git a/drivers/media/video/uvc/uvcvideo.h b/drivers/media/video/uvc/uvcvideo.h
index e7958aa..7ec9a04 100644
--- a/drivers/media/video/uvc/uvcvideo.h
+++ b/drivers/media/video/uvc/uvcvideo.h
@@ -75,6 +75,7 @@
#define UVC_TERM_INPUT 0x0000
#define UVC_TERM_OUTPUT 0x8000
+#define UVC_TERM_DIRECTION(term) ((term)->type & 0x8000)
#define UVC_ENTITY_TYPE(entity) ((entity)->type & 0x7fff)
#define UVC_ENTITY_IS_UNIT(entity) (((entity)->type & 0xff00) == 0)
@@ -148,7 +149,7 @@
#define UVC_MAX_STATUS_SIZE 16
#define UVC_CTRL_CONTROL_TIMEOUT 300
-#define UVC_CTRL_STREAMING_TIMEOUT 1000
+#define UVC_CTRL_STREAMING_TIMEOUT 3000
/* Devices quirks */
#define UVC_QUIRK_STATUS_INTERVAL 0x00000001
@@ -292,11 +293,9 @@
} media;
struct {
- __u8 bSourceID;
} output;
struct {
- __u8 bSourceID;
__u16 wMaxMultiplier;
__u8 bControlSize;
__u8 *bmControls;
@@ -304,21 +303,20 @@
} processing;
struct {
- __u8 bNrInPins;
- __u8 *baSourceID;
} selector;
struct {
__u8 guidExtensionCode[16];
__u8 bNumControls;
- __u8 bNrInPins;
- __u8 *baSourceID;
__u8 bControlSize;
__u8 *bmControls;
__u8 *bmControlsType;
} extension;
};
+ __u8 bNrInPins;
+ __u8 *baSourceID;
+
unsigned int ncontrols;
struct uvc_control *controls;
};
@@ -408,11 +406,9 @@
struct uvc_device *dev;
struct list_head list;
- struct list_head iterms; /* Input terminals */
- struct list_head oterms; /* Output terminals */
+ struct list_head entities; /* All entities */
struct uvc_entity *processing; /* Processing unit */
struct uvc_entity *selector; /* Selector unit */
- struct list_head extensions; /* Extension units */
struct mutex ctrl_mutex;
};
@@ -475,7 +471,6 @@
char name[32];
enum uvc_device_state state;
- struct kref kref;
struct list_head list;
atomic_t users;
@@ -488,6 +483,7 @@
/* Video Streaming interfaces */
struct list_head streams;
+ atomic_t nstreams;
/* Status Interrupt Endpoint */
struct usb_host_endpoint *int_ep;
@@ -511,8 +507,6 @@
struct uvc_driver {
struct usb_driver driver;
- struct mutex open_mutex; /* protects from open/disconnect race */
-
struct list_head devices; /* struct uvc_device list */
struct list_head controls; /* struct uvc_control_info list */
struct mutex ctrl_mutex; /* protects controls and devices
@@ -533,12 +527,14 @@
#define UVC_TRACE_FRAME (1 << 7)
#define UVC_TRACE_SUSPEND (1 << 8)
#define UVC_TRACE_STATUS (1 << 9)
+#define UVC_TRACE_VIDEO (1 << 10)
#define UVC_WARN_MINMAX 0
#define UVC_WARN_PROBE_DEF 1
extern unsigned int uvc_no_drop_param;
extern unsigned int uvc_trace_param;
+extern unsigned int uvc_timeout_param;
#define uvc_trace(flag, msg...) \
do { \
@@ -571,7 +567,6 @@
/* Core driver */
extern struct uvc_driver uvc_driver;
-extern void uvc_delete(struct kref *kref);
/* Video buffers queue management. */
extern void uvc_queue_init(struct uvc_video_queue *queue,
diff --git a/drivers/media/video/v4l2-common.c b/drivers/media/video/v4l2-common.c
index f5a93ae..e8e5aff 100644
--- a/drivers/media/video/v4l2-common.c
+++ b/drivers/media/video/v4l2-common.c
@@ -431,6 +431,8 @@
case V4L2_CID_CHROMA_AGC: return "Chroma AGC";
case V4L2_CID_COLOR_KILLER: return "Color Killer";
case V4L2_CID_COLORFX: return "Color Effects";
+ case V4L2_CID_ROTATE: return "Rotate";
+ case V4L2_CID_BG_COLOR: return "Background color";
/* MPEG controls */
case V4L2_CID_MPEG_CLASS: return "MPEG Encoder Controls";
@@ -587,6 +589,13 @@
qctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY;
min = max = step = def = 0;
break;
+ case V4L2_CID_BG_COLOR:
+ qctrl->type = V4L2_CTRL_TYPE_INTEGER;
+ step = 1;
+ min = 0;
+ /* Max is calculated as RGB888 that is 2^24 */
+ max = 0xFFFFFF;
+ break;
default:
qctrl->type = V4L2_CTRL_TYPE_INTEGER;
break;
diff --git a/drivers/media/video/videobuf-core.c b/drivers/media/video/videobuf-core.c
index 8e93c6f..bb0a1c8 100644
--- a/drivers/media/video/videobuf-core.c
+++ b/drivers/media/video/videobuf-core.c
@@ -110,7 +110,7 @@
void videobuf_queue_core_init(struct videobuf_queue *q,
- struct videobuf_queue_ops *ops,
+ const struct videobuf_queue_ops *ops,
struct device *dev,
spinlock_t *irqlock,
enum v4l2_buf_type type,
@@ -360,7 +360,7 @@
q->bufs[i]->bsize = bsize;
switch (memory) {
case V4L2_MEMORY_MMAP:
- q->bufs[i]->boff = bsize * i;
+ q->bufs[i]->boff = PAGE_ALIGN(bsize) * i;
break;
case V4L2_MEMORY_USERPTR:
case V4L2_MEMORY_OVERLAY:
@@ -430,9 +430,9 @@
count = VIDEO_MAX_FRAME;
size = 0;
q->ops->buf_setup(q, &count, &size);
- size = PAGE_ALIGN(size);
- dprintk(1, "reqbufs: bufs=%d, size=0x%x [%d pages total]\n",
- count, size, (count*size)>>PAGE_SHIFT);
+ dprintk(1, "reqbufs: bufs=%d, size=0x%x [%u pages total]\n",
+ count, size,
+ (unsigned int)((count*PAGE_ALIGN(size))>>PAGE_SHIFT) );
retval = __videobuf_mmap_setup(q, count, size, req->memory);
if (retval < 0) {
@@ -1099,7 +1099,7 @@
mbuf->size = 0;
for (i = 0; i < mbuf->frames; i++) {
mbuf->offsets[i] = q->bufs[i]->boff;
- mbuf->size += q->bufs[i]->bsize;
+ mbuf->size += PAGE_ALIGN(q->bufs[i]->bsize);
}
return 0;
diff --git a/drivers/media/video/videobuf-dma-contig.c b/drivers/media/video/videobuf-dma-contig.c
index c3065c4..d25f284 100644
--- a/drivers/media/video/videobuf-dma-contig.c
+++ b/drivers/media/video/videobuf-dma-contig.c
@@ -429,7 +429,7 @@
};
void videobuf_queue_dma_contig_init(struct videobuf_queue *q,
- struct videobuf_queue_ops *ops,
+ const struct videobuf_queue_ops *ops,
struct device *dev,
spinlock_t *irqlock,
enum v4l2_buf_type type,
diff --git a/drivers/media/video/videobuf-dma-sg.c b/drivers/media/video/videobuf-dma-sg.c
index 032ebae..fa78555 100644
--- a/drivers/media/video/videobuf-dma-sg.c
+++ b/drivers/media/video/videobuf-dma-sg.c
@@ -588,7 +588,7 @@
retval = -EBUSY;
goto done;
}
- size += q->bufs[last]->bsize;
+ size += PAGE_ALIGN(q->bufs[last]->bsize);
if (size == (vma->vm_end - vma->vm_start))
break;
}
@@ -610,7 +610,7 @@
continue;
q->bufs[i]->map = map;
q->bufs[i]->baddr = vma->vm_start + size;
- size += q->bufs[i]->bsize;
+ size += PAGE_ALIGN(q->bufs[i]->bsize);
}
map->count = 1;
@@ -702,7 +702,7 @@
}
void videobuf_queue_sg_init(struct videobuf_queue* q,
- struct videobuf_queue_ops *ops,
+ const struct videobuf_queue_ops *ops,
struct device *dev,
spinlock_t *irqlock,
enum v4l2_buf_type type,
diff --git a/drivers/media/video/videobuf-dvb.c b/drivers/media/video/videobuf-dvb.c
index 0e7dcba..a56cf0d 100644
--- a/drivers/media/video/videobuf-dvb.c
+++ b/drivers/media/video/videobuf-dvb.c
@@ -139,7 +139,9 @@
struct device *device,
char *adapter_name,
short *adapter_nr,
- int mfe_shared)
+ int mfe_shared,
+ int (*fe_ioctl_override)(struct dvb_frontend *,
+ unsigned int, void *, unsigned int))
{
int result;
@@ -154,6 +156,7 @@
}
fe->adapter.priv = adapter_priv;
fe->adapter.mfe_shared = mfe_shared;
+ fe->adapter.fe_ioctl_override = fe_ioctl_override;
return result;
}
@@ -253,7 +256,9 @@
void *adapter_priv,
struct device *device,
short *adapter_nr,
- int mfe_shared)
+ int mfe_shared,
+ int (*fe_ioctl_override)(struct dvb_frontend *,
+ unsigned int, void *, unsigned int))
{
struct list_head *list, *q;
struct videobuf_dvb_frontend *fe;
@@ -267,7 +272,7 @@
/* Bring up the adapter */
res = videobuf_dvb_register_adapter(f, module, adapter_priv, device,
- fe->dvb.name, adapter_nr, mfe_shared);
+ fe->dvb.name, adapter_nr, mfe_shared, fe_ioctl_override);
if (res < 0) {
printk(KERN_WARNING "videobuf_dvb_register_adapter failed (errno = %d)\n", res);
return res;
diff --git a/drivers/media/video/videobuf-vmalloc.c b/drivers/media/video/videobuf-vmalloc.c
index 35f3900..d6e6a28 100644
--- a/drivers/media/video/videobuf-vmalloc.c
+++ b/drivers/media/video/videobuf-vmalloc.c
@@ -391,8 +391,8 @@
};
void videobuf_queue_vmalloc_init(struct videobuf_queue* q,
- struct videobuf_queue_ops *ops,
- void *dev,
+ const struct videobuf_queue_ops *ops,
+ struct device *dev,
spinlock_t *irqlock,
enum v4l2_buf_type type,
enum v4l2_field field,
diff --git a/drivers/media/video/vpx3220.c b/drivers/media/video/vpx3220.c
index 97e0ce2..33205d7 100644
--- a/drivers/media/video/vpx3220.c
+++ b/drivers/media/video/vpx3220.c
@@ -391,7 +391,7 @@
{0x0e, 1}
};
- if (input < 0 || input > 2)
+ if (input > 2)
return -EINVAL;
v4l2_dbg(1, debug, sd, "input switched to %s\n", inputs[input]);
diff --git a/drivers/media/video/zoran/zoran.h b/drivers/media/video/zoran/zoran.h
index d439c76..cb1de7e 100644
--- a/drivers/media/video/zoran/zoran.h
+++ b/drivers/media/video/zoran/zoran.h
@@ -106,7 +106,7 @@
unsigned long jpeg_markers; /* Which markers should go into the JPEG output.
* Unless you exactly know what you do, leave them untouched.
* Inluding less markers will make the resulting code
- * smaller, but there will be fewer aplications
+ * smaller, but there will be fewer applications
* which can read it.
* The presence of the APP and COM marker is
* influenced by APP0_len and COM_len ONLY! */
diff --git a/drivers/media/video/zoran/zoran_driver.c b/drivers/media/video/zoran/zoran_driver.c
index 47137de..e9f72ca 100644
--- a/drivers/media/video/zoran/zoran_driver.c
+++ b/drivers/media/video/zoran/zoran_driver.c
@@ -2764,7 +2764,7 @@
struct zoran_fh *fh = __fh;
struct zoran *zr = fh->zr;
- if (inp->index < 0 || inp->index >= zr->card.inputs)
+ if (inp->index >= zr->card.inputs)
return -EINVAL;
else {
int id = inp->index;
diff --git a/drivers/media/video/zr364xx.c b/drivers/media/video/zr364xx.c
index 9aae011..2ef110b 100644
--- a/drivers/media/video/zr364xx.c
+++ b/drivers/media/video/zr364xx.c
@@ -115,6 +115,7 @@
{USB_DEVICE(0x0a17, 0x004e), .driver_info = METHOD2 },
{USB_DEVICE(0x041e, 0x405d), .driver_info = METHOD2 },
{USB_DEVICE(0x08ca, 0x2102), .driver_info = METHOD2 },
+ {USB_DEVICE(0x06d6, 0x003d), .driver_info = METHOD0 },
{} /* Terminating entry */
};
diff --git a/drivers/message/fusion/mptbase.h b/drivers/message/fusion/mptbase.h
index 8dd4d21..b494867 100644
--- a/drivers/message/fusion/mptbase.h
+++ b/drivers/message/fusion/mptbase.h
@@ -76,8 +76,8 @@
#define COPYRIGHT "Copyright (c) 1999-2008 " MODULEAUTHOR
#endif
-#define MPT_LINUX_VERSION_COMMON "3.04.12"
-#define MPT_LINUX_PACKAGE_NAME "@(#)mptlinux-3.04.12"
+#define MPT_LINUX_VERSION_COMMON "3.04.13"
+#define MPT_LINUX_PACKAGE_NAME "@(#)mptlinux-3.04.13"
#define WHAT_MAGIC_STRING "@" "(" "#" ")"
#define show_mptmod_ver(s,ver) \
diff --git a/drivers/message/fusion/mptctl.c b/drivers/message/fusion/mptctl.c
index 9b2e219..352acd0 100644
--- a/drivers/message/fusion/mptctl.c
+++ b/drivers/message/fusion/mptctl.c
@@ -621,11 +621,8 @@
*/
iocnumX = khdr.iocnum & 0xFF;
if (((iocnum = mpt_verify_adapter(iocnumX, &iocp)) < 0) ||
- (iocp == NULL)) {
- printk(KERN_DEBUG MYNAM "%s::mptctl_ioctl() @%d - ioc%d not found!\n",
- __FILE__, __LINE__, iocnumX);
+ (iocp == NULL))
return -ENODEV;
- }
if (!iocp->active) {
printk(KERN_DEBUG MYNAM "%s::mptctl_ioctl() @%d - Controller disabled.\n",
diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c
index c295786..5775275 100644
--- a/drivers/message/fusion/mptscsih.c
+++ b/drivers/message/fusion/mptscsih.c
@@ -792,11 +792,36 @@
* precedence!
*/
sc->result = (DID_OK << 16) | scsi_status;
- if (scsi_state & MPI_SCSI_STATE_AUTOSENSE_VALID) {
- /* Have already saved the status and sense data
+ if (!(scsi_state & MPI_SCSI_STATE_AUTOSENSE_VALID)) {
+
+ /*
+ * For an Errata on LSI53C1030
+ * When the length of request data
+ * and transfer data are different
+ * with result of command (READ or VERIFY),
+ * DID_SOFT_ERROR is set.
*/
- ;
- } else {
+ if (ioc->bus_type == SPI) {
+ if (pScsiReq->CDB[0] == READ_6 ||
+ pScsiReq->CDB[0] == READ_10 ||
+ pScsiReq->CDB[0] == READ_12 ||
+ pScsiReq->CDB[0] == READ_16 ||
+ pScsiReq->CDB[0] == VERIFY ||
+ pScsiReq->CDB[0] == VERIFY_16) {
+ if (scsi_bufflen(sc) !=
+ xfer_cnt) {
+ sc->result =
+ DID_SOFT_ERROR << 16;
+ printk(KERN_WARNING "Errata"
+ "on LSI53C1030 occurred."
+ "sc->req_bufflen=0x%02x,"
+ "xfer_cnt=0x%02x\n",
+ scsi_bufflen(sc),
+ xfer_cnt);
+ }
+ }
+ }
+
if (xfer_cnt < sc->underflow) {
if (scsi_status == SAM_STAT_BUSY)
sc->result = SAM_STAT_BUSY;
@@ -835,7 +860,58 @@
sc->result = (DID_OK << 16) | scsi_status;
if (scsi_state == 0) {
;
- } else if (scsi_state & MPI_SCSI_STATE_AUTOSENSE_VALID) {
+ } else if (scsi_state &
+ MPI_SCSI_STATE_AUTOSENSE_VALID) {
+
+ /*
+ * For potential trouble on LSI53C1030.
+ * (date:2007.xx.)
+ * It is checked whether the length of
+ * request data is equal to
+ * the length of transfer and residual.
+ * MEDIUM_ERROR is set by incorrect data.
+ */
+ if ((ioc->bus_type == SPI) &&
+ (sc->sense_buffer[2] & 0x20)) {
+ u32 difftransfer;
+ difftransfer =
+ sc->sense_buffer[3] << 24 |
+ sc->sense_buffer[4] << 16 |
+ sc->sense_buffer[5] << 8 |
+ sc->sense_buffer[6];
+ if (((sc->sense_buffer[3] & 0x80) ==
+ 0x80) && (scsi_bufflen(sc)
+ != xfer_cnt)) {
+ sc->sense_buffer[2] =
+ MEDIUM_ERROR;
+ sc->sense_buffer[12] = 0xff;
+ sc->sense_buffer[13] = 0xff;
+ printk(KERN_WARNING"Errata"
+ "on LSI53C1030 occurred."
+ "sc->req_bufflen=0x%02x,"
+ "xfer_cnt=0x%02x\n" ,
+ scsi_bufflen(sc),
+ xfer_cnt);
+ }
+ if (((sc->sense_buffer[3] & 0x80)
+ != 0x80) &&
+ (scsi_bufflen(sc) !=
+ xfer_cnt + difftransfer)) {
+ sc->sense_buffer[2] =
+ MEDIUM_ERROR;
+ sc->sense_buffer[12] = 0xff;
+ sc->sense_buffer[13] = 0xff;
+ printk(KERN_WARNING
+ "Errata on LSI53C1030 occurred"
+ "sc->req_bufflen=0x%02x,"
+ " xfer_cnt=0x%02x,"
+ "difftransfer=0x%02x\n",
+ scsi_bufflen(sc),
+ xfer_cnt,
+ difftransfer);
+ }
+ }
+
/*
* If running against circa 200003dd 909 MPT f/w,
* may get this (AUTOSENSE_VALID) for actual TASK_SET_FULL
@@ -2275,11 +2351,12 @@
* mptscsih_change_queue_depth - This function will set a devices queue depth
* @sdev: per scsi_device pointer
* @qdepth: requested queue depth
+ * @reason: calling context
*
* Adding support for new 'change_queue_depth' api.
*/
int
-mptscsih_change_queue_depth(struct scsi_device *sdev, int qdepth)
+mptscsih_change_queue_depth(struct scsi_device *sdev, int qdepth, int reason)
{
MPT_SCSI_HOST *hd = shost_priv(sdev->host);
VirtTarget *vtarget;
@@ -2291,6 +2368,9 @@
starget = scsi_target(sdev);
vtarget = starget->hostdata;
+ if (reason != SCSI_QDEPTH_DEFAULT)
+ return -EOPNOTSUPP;
+
if (ioc->bus_type == SPI) {
if (!(vtarget->tflags & MPT_TARGET_FLAGS_Q_YES))
max_depth = 1;
@@ -2357,7 +2437,8 @@
ioc->name, vtarget->negoFlags, vtarget->maxOffset,
vtarget->minSyncFactor));
- mptscsih_change_queue_depth(sdev, MPT_SCSI_CMD_PER_DEV_HIGH);
+ mptscsih_change_queue_depth(sdev, MPT_SCSI_CMD_PER_DEV_HIGH,
+ SCSI_QDEPTH_DEFAULT);
dsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
"tagged %d, simple %d, ordered %d\n",
ioc->name,sdev->tagged_supported, sdev->simple_tags,
diff --git a/drivers/message/fusion/mptscsih.h b/drivers/message/fusion/mptscsih.h
index e0b33e0..45a5ff3 100644
--- a/drivers/message/fusion/mptscsih.h
+++ b/drivers/message/fusion/mptscsih.h
@@ -128,7 +128,8 @@
extern int mptscsih_scandv_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *r);
extern int mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply);
extern int mptscsih_ioc_reset(MPT_ADAPTER *ioc, int post_reset);
-extern int mptscsih_change_queue_depth(struct scsi_device *sdev, int qdepth);
+extern int mptscsih_change_queue_depth(struct scsi_device *sdev, int qdepth,
+ int reason);
extern u8 mptscsih_raid_id_to_num(MPT_ADAPTER *ioc, u8 channel, u8 id);
extern int mptscsih_is_phys_disk(MPT_ADAPTER *ioc, u8 channel, u8 id);
extern struct device_attribute *mptscsih_host_attrs[];
diff --git a/drivers/message/i2o/i2o_block.c b/drivers/message/i2o/i2o_block.c
index d505b68..e39986a 100644
--- a/drivers/message/i2o/i2o_block.c
+++ b/drivers/message/i2o/i2o_block.c
@@ -940,7 +940,7 @@
* Allocate memory for the i2o_block_device struct, gendisk and request
* queue and initialize them as far as no additional information is needed.
*
- * Returns a pointer to the allocated I2O Block device on succes or a
+ * Returns a pointer to the allocated I2O Block device on success or a
* negative error code on failure.
*/
static struct i2o_block_device *i2o_block_device_alloc(void)
diff --git a/drivers/message/i2o/iop.c b/drivers/message/i2o/iop.c
index 27cf4af..e5ab621 100644
--- a/drivers/message/i2o/iop.c
+++ b/drivers/message/i2o/iop.c
@@ -132,7 +132,7 @@
* Removes a previously added pointer from the context list and returns
* the matching context id.
*
- * Returns context id on succes or 0 on failure.
+ * Returns context id on success or 0 on failure.
*/
u32 i2o_cntxt_list_remove(struct i2o_controller * c, void *ptr)
{
@@ -198,7 +198,7 @@
* @c: controller to which the context list belong
* @ptr: pointer to which the context id should be fetched
*
- * Returns context id which matches to the pointer on succes or 0 on
+ * Returns context id which matches to the pointer on success or 0 on
* failure.
*/
u32 i2o_cntxt_list_get_ptr(struct i2o_controller * c, void *ptr)
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 08f2d07..a296e71 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -35,6 +35,14 @@
This driver supports the ASIC3 multifunction chip found on many
PDAs (mainly iPAQ and HTC based ones)
+config MFD_SH_MOBILE_SDHI
+ bool "Support for SuperH Mobile SDHI"
+ depends on SUPERH
+ select MFD_CORE
+ ---help---
+ This driver supports the SDHI hardware block found in many
+ SuperH Mobile SoCs.
+
config MFD_DM355EVM_MSP
bool "DaVinci DM355 EVM microcontroller"
depends on I2C && MACH_DAVINCI_DM355_EVM
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index af0fc90..11350c1 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -4,6 +4,7 @@
obj-$(CONFIG_MFD_SM501) += sm501.o
obj-$(CONFIG_MFD_ASIC3) += asic3.o
+obj-$(CONFIG_MFD_SH_MOBILE_SDHI) += sh_mobile_sdhi.o
obj-$(CONFIG_HTC_EGPIO) += htc-egpio.o
obj-$(CONFIG_HTC_PASIC3) += htc-pasic3.o
diff --git a/drivers/mfd/sh_mobile_sdhi.c b/drivers/mfd/sh_mobile_sdhi.c
new file mode 100644
index 0000000..03efae8
--- /dev/null
+++ b/drivers/mfd/sh_mobile_sdhi.c
@@ -0,0 +1,156 @@
+/*
+ * SuperH Mobile SDHI
+ *
+ * Copyright (C) 2009 Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Based on "Compaq ASIC3 support":
+ *
+ * Copyright 2001 Compaq Computer Corporation.
+ * Copyright 2004-2005 Phil Blundell
+ * Copyright 2007-2008 OpenedHand Ltd.
+ *
+ * Authors: Phil Blundell <pb@handhelds.org>,
+ * Samuel Ortiz <sameo@openedhand.com>
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+
+#include <linux/mfd/core.h>
+#include <linux/mfd/tmio.h>
+#include <linux/mfd/sh_mobile_sdhi.h>
+
+struct sh_mobile_sdhi {
+ struct clk *clk;
+ struct tmio_mmc_data mmc_data;
+ struct mfd_cell cell_mmc;
+};
+
+static struct resource sh_mobile_sdhi_resources[] = {
+ {
+ .start = 0x000,
+ .end = 0x1ff,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = 0,
+ .end = 0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct mfd_cell sh_mobile_sdhi_cell = {
+ .name = "tmio-mmc",
+ .num_resources = ARRAY_SIZE(sh_mobile_sdhi_resources),
+ .resources = sh_mobile_sdhi_resources,
+};
+
+static void sh_mobile_sdhi_set_pwr(struct platform_device *tmio, int state)
+{
+ struct platform_device *pdev = to_platform_device(tmio->dev.parent);
+ struct sh_mobile_sdhi_info *p = pdev->dev.platform_data;
+
+ if (p && p->set_pwr)
+ p->set_pwr(pdev, state);
+}
+
+static int __init sh_mobile_sdhi_probe(struct platform_device *pdev)
+{
+ struct sh_mobile_sdhi *priv;
+ struct resource *mem;
+ char clk_name[8];
+ int ret, irq;
+
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!mem)
+ dev_err(&pdev->dev, "missing MEM resource\n");
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ dev_err(&pdev->dev, "missing IRQ resource\n");
+
+ if (!mem || (irq < 0))
+ return -EINVAL;
+
+ priv = kzalloc(sizeof(struct sh_mobile_sdhi), GFP_KERNEL);
+ if (priv == NULL) {
+ dev_err(&pdev->dev, "kzalloc failed\n");
+ return -ENOMEM;
+ }
+
+ snprintf(clk_name, sizeof(clk_name), "sdhi%d", pdev->id);
+ priv->clk = clk_get(&pdev->dev, clk_name);
+ if (IS_ERR(priv->clk)) {
+ dev_err(&pdev->dev, "cannot get clock \"%s\"\n", clk_name);
+ ret = PTR_ERR(priv->clk);
+ kfree(priv);
+ return ret;
+ }
+
+ clk_enable(priv->clk);
+
+ /* FIXME: silly const unsigned int hclk */
+ *(unsigned int *)&priv->mmc_data.hclk = clk_get_rate(priv->clk);
+ priv->mmc_data.set_pwr = sh_mobile_sdhi_set_pwr;
+
+ memcpy(&priv->cell_mmc, &sh_mobile_sdhi_cell, sizeof(priv->cell_mmc));
+ priv->cell_mmc.driver_data = &priv->mmc_data;
+ priv->cell_mmc.platform_data = &priv->cell_mmc;
+ priv->cell_mmc.data_size = sizeof(priv->cell_mmc);
+
+ platform_set_drvdata(pdev, priv);
+
+ ret = mfd_add_devices(&pdev->dev, pdev->id,
+ &priv->cell_mmc, 1, mem, irq);
+ if (ret) {
+ clk_disable(priv->clk);
+ clk_put(priv->clk);
+ kfree(priv);
+ }
+
+ return ret;
+}
+
+static int sh_mobile_sdhi_remove(struct platform_device *pdev)
+{
+ struct sh_mobile_sdhi *priv = platform_get_drvdata(pdev);
+
+ mfd_remove_devices(&pdev->dev);
+ clk_disable(priv->clk);
+ clk_put(priv->clk);
+ kfree(priv);
+
+ return 0;
+}
+
+static struct platform_driver sh_mobile_sdhi_driver = {
+ .driver = {
+ .name = "sh_mobile_sdhi",
+ .owner = THIS_MODULE,
+ },
+ .probe = sh_mobile_sdhi_probe,
+ .remove = __devexit_p(sh_mobile_sdhi_remove),
+};
+
+static int __init sh_mobile_sdhi_init(void)
+{
+ return platform_driver_register(&sh_mobile_sdhi_driver);
+}
+
+static void __exit sh_mobile_sdhi_exit(void)
+{
+ platform_driver_unregister(&sh_mobile_sdhi_driver);
+}
+
+module_init(sh_mobile_sdhi_init);
+module_exit(sh_mobile_sdhi_exit);
+
+MODULE_DESCRIPTION("SuperH Mobile SDHI driver");
+MODULE_AUTHOR("Magnus Damm");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mfd/ucb1400_core.c b/drivers/mfd/ucb1400_core.c
index fa294b6..85fd942 100644
--- a/drivers/mfd/ucb1400_core.c
+++ b/drivers/mfd/ucb1400_core.c
@@ -51,6 +51,7 @@
struct ucb1400_ts ucb_ts;
struct ucb1400_gpio ucb_gpio;
struct snd_ac97 *ac97;
+ struct ucb1400_pdata *pdata = dev->platform_data;
memset(&ucb_ts, 0, sizeof(ucb_ts));
memset(&ucb_gpio, 0, sizeof(ucb_gpio));
@@ -88,6 +89,12 @@
/* TOUCHSCREEN */
ucb_ts.ac97 = ac97;
+
+ if (pdata != NULL && pdata->irq >= 0)
+ ucb_ts.irq = pdata->irq;
+ else
+ ucb_ts.irq = -1;
+
ucb->ucb1400_ts = platform_device_alloc("ucb1400_ts", -1);
if (!ucb->ucb1400_ts) {
err = -ENOMEM;
diff --git a/drivers/misc/sgi-gru/grufile.c b/drivers/misc/sgi-gru/grufile.c
index 41c8fe2..ce5eda9 100644
--- a/drivers/misc/sgi-gru/grufile.c
+++ b/drivers/misc/sgi-gru/grufile.c
@@ -92,7 +92,7 @@
/*
* gru_file_mmap
*
- * Called when mmaping the device. Initializes the vma with a fault handler
+ * Called when mmapping the device. Initializes the vma with a fault handler
* and private data structure necessary to allocate, track, and free the
* underlying pages.
*/
diff --git a/drivers/mmc/card/sdio_uart.c b/drivers/mmc/card/sdio_uart.c
index 36a8d53..b8e7c5a 100644
--- a/drivers/mmc/card/sdio_uart.c
+++ b/drivers/mmc/card/sdio_uart.c
@@ -231,7 +231,8 @@
return ret;
}
-static void sdio_uart_write_mctrl(struct sdio_uart_port *port, unsigned int mctrl)
+static void sdio_uart_write_mctrl(struct sdio_uart_port *port,
+ unsigned int mctrl)
{
unsigned char mcr = 0;
@@ -387,7 +388,8 @@
sdio_out(port, UART_IER, port->ier);
}
-static void sdio_uart_receive_chars(struct sdio_uart_port *port, unsigned int *status)
+static void sdio_uart_receive_chars(struct sdio_uart_port *port,
+ unsigned int *status)
{
struct tty_struct *tty = port->tty;
unsigned int ch, flag;
@@ -399,7 +401,7 @@
port->icount.rx++;
if (unlikely(*status & (UART_LSR_BI | UART_LSR_PE |
- UART_LSR_FE | UART_LSR_OE))) {
+ UART_LSR_FE | UART_LSR_OE))) {
/*
* For statistics only
*/
@@ -417,9 +419,9 @@
* Mask off conditions which should be ignored.
*/
*status &= port->read_status_mask;
- if (*status & UART_LSR_BI) {
+ if (*status & UART_LSR_BI)
flag = TTY_BREAK;
- } else if (*status & UART_LSR_PE)
+ else if (*status & UART_LSR_PE)
flag = TTY_PARITY;
else if (*status & UART_LSR_FE)
flag = TTY_FRAME;
@@ -574,7 +576,7 @@
*/
sdio_out(port, UART_FCR, UART_FCR_ENABLE_FIFO);
sdio_out(port, UART_FCR, UART_FCR_ENABLE_FIFO |
- UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
+ UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
sdio_out(port, UART_FCR, 0);
/*
@@ -635,7 +637,7 @@
if (port->tty->termios->c_cflag & HUPCL)
sdio_uart_clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
- /* Disable interrupts from this port */
+ /* Disable interrupts from this port */
sdio_release_irq(port->func);
port->ier = 0;
sdio_out(port, UART_IER, 0);
@@ -659,7 +661,7 @@
free_page((unsigned long)port->xmit.buf);
}
-static int sdio_uart_open (struct tty_struct *tty, struct file * filp)
+static int sdio_uart_open(struct tty_struct *tty, struct file *filp)
{
struct sdio_uart_port *port;
int ret;
@@ -846,7 +848,7 @@
struct sdio_uart_port *port = tty->driver_data;
unsigned int cflag = tty->termios->c_cflag;
-#define RELEVANT_IFLAG(iflag) ((iflag) & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
+#define RELEVANT_IFLAG(iflag) ((iflag) & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
if ((cflag ^ old_termios->c_cflag) == 0 &&
RELEVANT_IFLAG(tty->termios->c_iflag ^ old_termios->c_iflag) == 0)
@@ -925,7 +927,7 @@
struct sdio_uart_port *port = tty->driver_data;
int result;
- result =sdio_uart_claim_func(port);
+ result = sdio_uart_claim_func(port);
if(!result) {
sdio_uart_update_mctrl(port, set, clear);
sdio_uart_release_func(port);
@@ -946,31 +948,31 @@
seq_printf(m, "%d: uart:SDIO", i);
if(capable(CAP_SYS_ADMIN)) {
seq_printf(m, " tx:%d rx:%d",
- port->icount.tx, port->icount.rx);
+ port->icount.tx, port->icount.rx);
if (port->icount.frame)
seq_printf(m, " fe:%d",
- port->icount.frame);
+ port->icount.frame);
if (port->icount.parity)
seq_printf(m, " pe:%d",
- port->icount.parity);
+ port->icount.parity);
if (port->icount.brk)
seq_printf(m, " brk:%d",
- port->icount.brk);
+ port->icount.brk);
if (port->icount.overrun)
seq_printf(m, " oe:%d",
- port->icount.overrun);
+ port->icount.overrun);
if (port->icount.cts)
seq_printf(m, " cts:%d",
- port->icount.cts);
+ port->icount.cts);
if (port->icount.dsr)
seq_printf(m, " dsr:%d",
- port->icount.dsr);
+ port->icount.dsr);
if (port->icount.rng)
seq_printf(m, " rng:%d",
- port->icount.rng);
+ port->icount.rng);
if (port->icount.dcd)
seq_printf(m, " dcd:%d",
- port->icount.dcd);
+ port->icount.dcd);
}
sdio_uart_port_put(port);
seq_putc(m, '\n');
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 432ae83..e04b751 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -329,7 +329,7 @@
config MMC_TMIO
tristate "Toshiba Mobile IO Controller (TMIO) MMC/SD function support"
- depends on MFD_TMIO || MFD_ASIC3
+ depends on MFD_TMIO || MFD_ASIC3 || SUPERH
help
This provides support for the SD/MMC cell found in TC6393XB,
T7L66XB and also HTC ASIC3
diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c
index 99b74a3..941a4d3 100644
--- a/drivers/mmc/host/s3cmci.c
+++ b/drivers/mmc/host/s3cmci.c
@@ -1360,7 +1360,7 @@
static struct s3c24xx_mci_pdata s3cmci_def_pdata = {
/* This is currently here to avoid a number of if (host->pdata)
- * checks. Any zero fields to ensure reaonable defaults are picked. */
+ * checks. Any zero fields to ensure reasonable defaults are picked. */
};
#ifdef CONFIG_CPU_FREQ
diff --git a/drivers/mtd/chips/Kconfig b/drivers/mtd/chips/Kconfig
index 9408099..35c6a23 100644
--- a/drivers/mtd/chips/Kconfig
+++ b/drivers/mtd/chips/Kconfig
@@ -1,5 +1,3 @@
-# drivers/mtd/chips/Kconfig
-
menu "RAM/ROM/Flash chip drivers"
depends on MTD!=n
@@ -242,4 +240,3 @@
then say N.
endmenu
-
diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig
index c222514..35081ce 100644
--- a/drivers/mtd/devices/Kconfig
+++ b/drivers/mtd/devices/Kconfig
@@ -1,5 +1,3 @@
-# drivers/mtd/maps/Kconfig
-
menu "Self-contained MTD device drivers"
depends on MTD!=n
@@ -308,4 +306,3 @@
you have managed to wipe the first block.
endmenu
-
diff --git a/drivers/mtd/devices/slram.c b/drivers/mtd/devices/slram.c
index 3aa05cd..592016a 100644
--- a/drivers/mtd/devices/slram.c
+++ b/drivers/mtd/devices/slram.c
@@ -18,7 +18,7 @@
to specify the offset instead of the absolute address
NOTE:
- With slram it's only possible to map a contigous memory region. Therfore
+ With slram it's only possible to map a contiguous memory region. Therefore
if there's a device mapped somewhere in the region specified slram will
fail to load (see kernel log if modprobe fails).
diff --git a/drivers/mtd/lpddr/Kconfig b/drivers/mtd/lpddr/Kconfig
index 5a401d8..265f969 100644
--- a/drivers/mtd/lpddr/Kconfig
+++ b/drivers/mtd/lpddr/Kconfig
@@ -1,5 +1,3 @@
-# drivers/mtd/chips/Kconfig
-
menu "LPDDR flash memory drivers"
depends on MTD!=n
@@ -20,4 +18,3 @@
families of devices. This serves similar purpose of CFI on legacy
Flash products
endmenu
-
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index 14be075..847e214 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -1,5 +1,3 @@
-# drivers/mtd/maps/Kconfig
-
menu "Mapping drivers for chip access"
depends on MTD!=n
@@ -389,9 +387,9 @@
depends on MTD_CFI && MTD_COMPLEX_MAPPINGS && ARCH_IXP2000
help
This enables MTD access to flash devices on platforms based
- on Intel's IXP2000 family of network processors such as the
- IXDP425 and Coyote. If you have an IXP2000 based board and
- would like to use the flash chips on it, say 'Y'.
+ on Intel's IXP2000 family of network processors. If you have an
+ IXP2000 based board and would like to use the flash chips on it,
+ say 'Y'.
config MTD_FORTUNET
tristate "CFI Flash device mapped on the FortuNet board"
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 8f8e87b..0e35e1a 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -1,5 +1,3 @@
-# drivers/mtd/nand/Kconfig
-
menuconfig MTD_NAND
tristate "NAND Device Support"
depends on MTD
diff --git a/drivers/mtd/nand/diskonchip.c b/drivers/mtd/nand/diskonchip.c
index e51c1ed7..b126cf8 100644
--- a/drivers/mtd/nand/diskonchip.c
+++ b/drivers/mtd/nand/diskonchip.c
@@ -1056,7 +1056,7 @@
};
/* Find the (I)NFTL Media Header, and optionally also the mirror media header.
- On sucessful return, buf will contain a copy of the media header for
+ On successful return, buf will contain a copy of the media header for
further processing. id is the string to scan for, and will presumably be
either "ANAND" or "BNAND". If findmirror=1, also look for the mirror media
header. The page #s of the found media headers are placed in mh0_page and
diff --git a/drivers/mtd/nand/nand_ecc.c b/drivers/mtd/nand/nand_ecc.c
index db7ae9d..92320a6 100644
--- a/drivers/mtd/nand/nand_ecc.c
+++ b/drivers/mtd/nand/nand_ecc.c
@@ -475,7 +475,7 @@
*
* The b2 shift is there to get rid of the lowest two bits.
* We could also do addressbits[b2] >> 1 but for the
- * performace it does not make any difference
+ * performance it does not make any difference
*/
if (eccsize_mult == 1)
byte_addr = (addressbits[b1] << 4) + addressbits[b0];
diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c
index 11dc7e6..68b5b3a 100644
--- a/drivers/mtd/nand/s3c2410.c
+++ b/drivers/mtd/nand/s3c2410.c
@@ -875,7 +875,7 @@
* @info: The controller instance.
* @nmtd: The driver version of the MTD instance.
*
- * This routine is called after the chip probe has succesfully completed
+ * This routine is called after the chip probe has successfully completed
* and the relevant per-chip information updated. This call ensure that
* we update the internal state accordingly.
*
diff --git a/drivers/mtd/onenand/Kconfig b/drivers/mtd/onenand/Kconfig
index a38f580..3a9f157 100644
--- a/drivers/mtd/onenand/Kconfig
+++ b/drivers/mtd/onenand/Kconfig
@@ -1,7 +1,3 @@
-#
-# linux/drivers/mtd/onenand/Kconfig
-#
-
menuconfig MTD_ONENAND
tristate "OneNAND Device Support"
depends on MTD
diff --git a/drivers/mtd/ubi/Kconfig b/drivers/mtd/ubi/Kconfig
index b1cd7a1..0a8c7ea 100644
--- a/drivers/mtd/ubi/Kconfig
+++ b/drivers/mtd/ubi/Kconfig
@@ -1,5 +1,3 @@
-# drivers/mtd/ubi/Kconfig
-
menu "UBI - Unsorted block images"
depends on MTD
diff --git a/drivers/mtd/ubi/kapi.c b/drivers/mtd/ubi/kapi.c
index 88a72e9..277786e 100644
--- a/drivers/mtd/ubi/kapi.c
+++ b/drivers/mtd/ubi/kapi.c
@@ -22,6 +22,8 @@
#include <linux/module.h>
#include <linux/err.h>
+#include <linux/namei.h>
+#include <linux/fs.h>
#include <asm/div64.h>
#include "ubi.h"
@@ -280,6 +282,44 @@
EXPORT_SYMBOL_GPL(ubi_open_volume_nm);
/**
+ * ubi_open_volume_path - open UBI volume by its character device node path.
+ * @pathname: volume character device node path
+ * @mode: open mode
+ *
+ * This function is similar to 'ubi_open_volume()', but opens a volume the path
+ * to its character device node.
+ */
+struct ubi_volume_desc *ubi_open_volume_path(const char *pathname, int mode)
+{
+ int error, ubi_num, vol_id;
+ struct ubi_volume_desc *ret;
+ struct inode *inode;
+ struct path path;
+
+ dbg_gen("open volume %s, mode %d", pathname, mode);
+
+ if (!pathname || !*pathname)
+ return ERR_PTR(-EINVAL);
+
+ error = kern_path(pathname, LOOKUP_FOLLOW, &path);
+ if (error)
+ return ERR_PTR(error);
+
+ inode = path.dentry->d_inode;
+ ubi_num = ubi_major2num(imajor(inode));
+ vol_id = iminor(inode) - 1;
+
+ if (vol_id >= 0 && ubi_num >= 0)
+ ret = ubi_open_volume(ubi_num, vol_id, mode);
+ else
+ ret = ERR_PTR(-ENODEV);
+
+ path_put(&path);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(ubi_open_volume_path);
+
+/**
* ubi_close_volume - close UBI volume.
* @desc: volume descriptor
*/
diff --git a/drivers/mtd/ubi/upd.c b/drivers/mtd/ubi/upd.c
index 74fdc40..c1d7b88 100644
--- a/drivers/mtd/ubi/upd.c
+++ b/drivers/mtd/ubi/upd.c
@@ -147,12 +147,14 @@
}
if (bytes == 0) {
+ err = ubi_wl_flush(ubi);
+ if (err)
+ return err;
+
err = clear_update_marker(ubi, vol, 0);
if (err)
return err;
- err = ubi_wl_flush(ubi);
- if (!err)
- vol->updating = 0;
+ vol->updating = 0;
}
vol->upd_buf = vmalloc(ubi->leb_size);
@@ -362,16 +364,16 @@
ubi_assert(vol->upd_received <= vol->upd_bytes);
if (vol->upd_received == vol->upd_bytes) {
+ err = ubi_wl_flush(ubi);
+ if (err)
+ return err;
/* The update is finished, clear the update marker */
err = clear_update_marker(ubi, vol, vol->upd_bytes);
if (err)
return err;
- err = ubi_wl_flush(ubi);
- if (err == 0) {
- vol->updating = 0;
- err = to_write;
- vfree(vol->upd_buf);
- }
+ vol->updating = 0;
+ err = to_write;
+ vfree(vol->upd_buf);
}
return err;
diff --git a/drivers/net/82596.c b/drivers/net/82596.c
index ea6b139..1663bc9 100644
--- a/drivers/net/82596.c
+++ b/drivers/net/82596.c
@@ -19,7 +19,7 @@
TBD:
* look at deferring rx frames rather than discarding (as per tulip)
* handle tx ring full as per tulip
- * performace test to tune rx_copybreak
+ * performance test to tune rx_copybreak
Most of my modifications relate to the braindead big-endian
implementation by Intel. When the i596 is operating in
diff --git a/drivers/net/amd8111e.c b/drivers/net/amd8111e.c
index 4e6359f..766aabf 100644
--- a/drivers/net/amd8111e.c
+++ b/drivers/net/amd8111e.c
@@ -1633,8 +1633,13 @@
readl(lp->mmio + CMD7);
return 0;
}
-/* This function is called when a packet transmission fails to complete within a resonable period, on the assumption that an interrupts have been failed or the interface is locked up. This function will reinitialize the hardware */
+/*
+ * This function is called when a packet transmission fails to complete
+ * within a reasonable period, on the assumption that an interrupt have
+ * failed or the interface is locked up. This function will reinitialize
+ * the hardware.
+ */
static void amd8111e_tx_timeout(struct net_device *dev)
{
struct amd8111e_priv* lp = netdev_priv(dev);
diff --git a/drivers/net/appletalk/cops.c b/drivers/net/appletalk/cops.c
index 50cecf4..73b38c2 100644
--- a/drivers/net/appletalk/cops.c
+++ b/drivers/net/appletalk/cops.c
@@ -120,7 +120,7 @@
* DAYNA driver mode:
* Dayna DL2000/DaynaTalk PC (Half Length), COPS LT-95,
* Farallon PhoneNET PC III, Farallon PhoneNET PC II
- * Other cards possibly supported mode unkown though:
+ * Other cards possibly supported mode unknown though:
* Dayna DL2000 (Full length), COPS LT/M (Micro-Channel)
*
* Cards NOT supported by this driver but supported by the ltpc.c
diff --git a/drivers/net/ariadne.h b/drivers/net/ariadne.h
index bb613f2..727be5c 100644
--- a/drivers/net/ariadne.h
+++ b/drivers/net/ariadne.h
@@ -244,7 +244,7 @@
#define DLNKTST 0x0010 /* Disable Link Status */
#define DAPC 0x0008 /* Disable Automatic Polarity Correction */
#define MENDECL 0x0004 /* MENDEC Loopback Mode */
-#define LRTTSEL 0x0002 /* Low Receive Treshold/Transmit Mode Select */
+#define LRTTSEL 0x0002 /* Low Receive Threshold/Transmit Mode Select */
#define PORTSEL1 0x0001 /* Port Select Bits */
#define PORTSEL2 0x8000 /* Port Select Bits */
#define INTL 0x4000 /* Internal Loopback */
diff --git a/drivers/net/atl1c/atl1c_main.c b/drivers/net/atl1c/atl1c_main.c
index 1e2f57d..6eb9241 100644
--- a/drivers/net/atl1c/atl1c_main.c
+++ b/drivers/net/atl1c/atl1c_main.c
@@ -1540,7 +1540,7 @@
if (status & ISR_OVER)
if (netif_msg_intr(adapter))
dev_warn(&pdev->dev,
- "TX/RX over flow (status = 0x%x)\n",
+ "TX/RX overflow (status = 0x%x)\n",
status & ISR_OVER);
/* link event */
diff --git a/drivers/net/benet/be_cmds.h b/drivers/net/benet/be_cmds.h
index e7323be..92b87ef 100644
--- a/drivers/net/benet/be_cmds.h
+++ b/drivers/net/benet/be_cmds.h
@@ -444,7 +444,7 @@
* filtering capabilities. */
struct be_cmd_req_if_create {
struct be_cmd_req_hdr hdr;
- u32 version; /* ignore currntly */
+ u32 version; /* ignore currently */
u32 capability_flags;
u32 enable_flags;
u8 mac_addr[ETH_ALEN];
diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c
index 957a0f7..24c7d99 100644
--- a/drivers/net/benet/be_main.c
+++ b/drivers/net/benet/be_main.c
@@ -1982,7 +1982,7 @@
goto fw_exit;
}
- dev_info(&adapter->pdev->dev, "Firmware flashed succesfully\n");
+ dev_info(&adapter->pdev->dev, "Firmware flashed successfully\n");
fw_exit:
release_firmware(fw);
diff --git a/drivers/net/bnx2x_reg.h b/drivers/net/bnx2x_reg.h
index b668173..944964e 100644
--- a/drivers/net/bnx2x_reg.h
+++ b/drivers/net/bnx2x_reg.h
@@ -2536,7 +2536,7 @@
/* [RC 1] A flag to indicate that overflow error occurred in one of the
queues. */
#define QM_REG_OVFERROR 0x16805c
-/* [RC 7] the Q were the qverflow occurs */
+/* [RC 7] the Q where the overflow occurs */
#define QM_REG_OVFQNUM 0x168058
/* [R 16] Pause state for physical queues 15-0 */
#define QM_REG_PAUSESTATE0 0x168410
diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c
index 0d30d1e..00ab51e 100644
--- a/drivers/net/bonding/bond_alb.c
+++ b/drivers/net/bonding/bond_alb.c
@@ -556,7 +556,7 @@
}
}
- /* do not update the entries again untill this counter is zero so that
+ /* do not update the entries again until this counter is zero so that
* not to confuse the clients.
*/
bond_info->rlb_update_delay_counter = RLB_UPDATE_DELAY;
diff --git a/drivers/net/cxgb3/sge.c b/drivers/net/cxgb3/sge.c
index 49f3de7..bdbd147 100644
--- a/drivers/net/cxgb3/sge.c
+++ b/drivers/net/cxgb3/sge.c
@@ -1285,7 +1285,7 @@
/*
* We do not use Tx completion interrupts to free DMAd Tx packets.
- * This is good for performamce but means that we rely on new Tx
+ * This is good for performance but means that we rely on new Tx
* packets arriving to run the destructors of completed packets,
* which open up space in their sockets' send queues. Sometimes
* we do not get such new packets causing Tx to stall. A single
diff --git a/drivers/net/ehea/ehea_ethtool.c b/drivers/net/ehea/ehea_ethtool.c
index d768852..75b099c 100644
--- a/drivers/net/ehea/ehea_ethtool.c
+++ b/drivers/net/ehea/ehea_ethtool.c
@@ -118,7 +118,7 @@
ret = ehea_set_portspeed(port, sp);
if (!ret)
- ehea_info("%s: Port speed succesfully set: %dMbps "
+ ehea_info("%s: Port speed successfully set: %dMbps "
"%s Duplex",
port->netdev->name, port->port_speed,
port->full_duplex == 1 ? "Full" : "Half");
@@ -134,7 +134,7 @@
ret = ehea_set_portspeed(port, EHEA_SPEED_AUTONEG);
if (!ret)
- ehea_info("%s: Port speed succesfully set: %dMbps "
+ ehea_info("%s: Port speed successfully set: %dMbps "
"%s Duplex",
port->netdev->name, port->port_speed,
port->full_duplex == 1 ? "Full" : "Half");
diff --git a/drivers/net/hamradio/baycom_ser_fdx.c b/drivers/net/hamradio/baycom_ser_fdx.c
index ed60fd6..0cab992 100644
--- a/drivers/net/hamradio/baycom_ser_fdx.c
+++ b/drivers/net/hamradio/baycom_ser_fdx.c
@@ -35,7 +35,7 @@
* driver only supports standard serial hardware (8250, 16450, 16550A)
*
* This modem usually draws its supply current out of the otherwise unused
- * TXD pin of the serial port. Thus a contignuous stream of 0x00-bytes
+ * TXD pin of the serial port. Thus a contiguous stream of 0x00-bytes
* is transmitted to achieve a positive supply voltage.
*
* hsk: This is a 4800 baud FSK modem, designed for TNC use. It works fine
diff --git a/drivers/net/irda/smsc-ircc2.c b/drivers/net/irda/smsc-ircc2.c
index 1e8dd8c..8f7d0d1 100644
--- a/drivers/net/irda/smsc-ircc2.c
+++ b/drivers/net/irda/smsc-ircc2.c
@@ -115,7 +115,7 @@
unsigned short vendor; /* PCI vendor ID */
unsigned short device; /* PCI vendor ID */
unsigned short subvendor; /* PCI subsystem vendor ID */
- unsigned short subdevice; /* PCI sybsystem device ID */
+ unsigned short subdevice; /* PCI subsystem device ID */
unsigned short sir_io; /* I/O port for SIR */
unsigned short fir_io; /* I/O port for FIR */
unsigned char fir_irq; /* FIR IRQ */
diff --git a/drivers/net/iseries_veth.c b/drivers/net/iseries_veth.c
index 4999719..16c9191 100644
--- a/drivers/net/iseries_veth.c
+++ b/drivers/net/iseries_veth.c
@@ -1384,7 +1384,7 @@
unsigned long done;
int i = 1;
- /* FIXME: skbs are continguous in real addresses. Do we
+ /* FIXME: skbs are contiguous in real addresses. Do we
* really need to break it into PAGE_SIZE chunks, or can we do
* it just at the granularity of iSeries real->absolute
* mapping? Indeed, given the way the allocator works, can we
diff --git a/drivers/net/lasi_82596.c b/drivers/net/lasi_82596.c
index a0c5785..b77238d 100644
--- a/drivers/net/lasi_82596.c
+++ b/drivers/net/lasi_82596.c
@@ -47,7 +47,7 @@
TBD:
* look at deferring rx frames rather than discarding (as per tulip)
* handle tx ring full as per tulip
- * performace test to tune rx_copybreak
+ * performance test to tune rx_copybreak
Most of my modifications relate to the braindead big-endian
implementation by Intel. When the i596 is operating in
diff --git a/drivers/net/lib82596.c b/drivers/net/lib82596.c
index 7a07430..b117f7f 100644
--- a/drivers/net/lib82596.c
+++ b/drivers/net/lib82596.c
@@ -47,7 +47,7 @@
TBD:
* look at deferring rx frames rather than discarding (as per tulip)
* handle tx ring full as per tulip
- * performace test to tune rx_copybreak
+ * performance test to tune rx_copybreak
Most of my modifications relate to the braindead big-endian
implementation by Intel. When the i596 is operating in
diff --git a/drivers/net/mlx4/en_rx.c b/drivers/net/mlx4/en_rx.c
index 03b781a..829b9ec 100644
--- a/drivers/net/mlx4/en_rx.c
+++ b/drivers/net/mlx4/en_rx.c
@@ -204,7 +204,7 @@
en_dbg(DRV, priv, "Freeing fragment:%d\n", nr);
dma = be64_to_cpu(rx_desc->data[nr].addr);
- en_dbg(DRV, priv, "Unmaping buffer at dma:0x%llx\n", (u64) dma);
+ en_dbg(DRV, priv, "Unmapping buffer at dma:0x%llx\n", (u64) dma);
pci_unmap_single(mdev->pdev, dma, skb_frags[nr].size,
PCI_DMA_FROMDEVICE);
put_page(skb_frags[nr].page);
diff --git a/drivers/net/mlx4/en_tx.c b/drivers/net/mlx4/en_tx.c
index 8c72799..3d1396a 100644
--- a/drivers/net/mlx4/en_tx.c
+++ b/drivers/net/mlx4/en_tx.c
@@ -47,7 +47,7 @@
static int inline_thold __read_mostly = MAX_INLINE;
module_param_named(inline_thold, inline_thold, int, 0444);
-MODULE_PARM_DESC(inline_thold, "treshold for using inline data");
+MODULE_PARM_DESC(inline_thold, "threshold for using inline data");
int mlx4_en_create_tx_ring(struct mlx4_en_priv *priv,
struct mlx4_en_tx_ring *ring, u32 size,
diff --git a/drivers/net/mlx4/mlx4_en.h b/drivers/net/mlx4/mlx4_en.h
index 4376147..82c3ebc 100644
--- a/drivers/net/mlx4/mlx4_en.h
+++ b/drivers/net/mlx4/mlx4_en.h
@@ -162,7 +162,7 @@
#define MLX4_EN_DEF_RX_PAUSE 1
#define MLX4_EN_DEF_TX_PAUSE 1
-/* Interval between sucessive polls in the Tx routine when polling is used
+/* Interval between successive polls in the Tx routine when polling is used
instead of interrupts (in per-core Tx rings) - should be power of 2 */
#define MLX4_EN_TX_POLL_MODER 16
#define MLX4_EN_TX_POLL_TIMEOUT (HZ / 4)
diff --git a/drivers/net/ps3_gelic_net.c b/drivers/net/ps3_gelic_net.c
index 89c4948..0c76859 100644
--- a/drivers/net/ps3_gelic_net.c
+++ b/drivers/net/ps3_gelic_net.c
@@ -314,7 +314,7 @@
* @card: card structure
* @descr: descriptor to re-init
*
- * return 0 on succes, <0 on failure
+ * return 0 on success, <0 on failure
*
* allocates a new rx skb, iommu-maps it and attaches it to the descriptor.
* Activate the descriptor state-wise
diff --git a/drivers/net/ps3_gelic_wireless.h b/drivers/net/ps3_gelic_wireless.h
index 5b631c6..0a88b53 100644
--- a/drivers/net/ps3_gelic_wireless.h
+++ b/drivers/net/ps3_gelic_wireless.h
@@ -199,7 +199,7 @@
/* for 'stat' member of gelic_wl_info */
enum gelic_wl_info_status_bit {
GELIC_WL_STAT_CONFIGURED,
- GELIC_WL_STAT_CH_INFO, /* ch info aquired */
+ GELIC_WL_STAT_CH_INFO, /* ch info acquired */
GELIC_WL_STAT_ESSID_SET, /* ESSID specified by userspace */
GELIC_WL_STAT_BSSID_SET, /* BSSID specified by userspace */
GELIC_WL_STAT_WPA_PSK_SET, /* PMK specified by userspace */
diff --git a/drivers/net/qla3xxx.c b/drivers/net/qla3xxx.c
index e3e6bc9..dd35066 100644
--- a/drivers/net/qla3xxx.c
+++ b/drivers/net/qla3xxx.c
@@ -3651,7 +3651,7 @@
ql_sem_unlock(qdev, QL_DRVR_SEM_MASK);
} else {
printk(KERN_ERR PFX
- "%s: Could not aquire driver lock.\n",
+ "%s: Could not acquire driver lock.\n",
ndev->name);
goto err_lock;
}
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index 0dd7839..cc42186 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -3238,7 +3238,7 @@
/**
* s2io_chk_xpak_counter - Function to check the status of the xpak counters
- * @counter : couter value to be updated
+ * @counter : counter value to be updated
* @flag : flag to indicate the status
* @type : counter type
* Description:
diff --git a/drivers/net/sis900.c b/drivers/net/sis900.c
index 9a12d88..7360d4b 100644
--- a/drivers/net/sis900.c
+++ b/drivers/net/sis900.c
@@ -1760,7 +1760,7 @@
sis_priv->rx_ring[entry].bufptr, RX_BUF_SIZE,
PCI_DMA_FROMDEVICE);
- /* refill the Rx buffer, what if there is not enought
+ /* refill the Rx buffer, what if there is not enough
* memory for new socket buffer ?? */
if ((skb = dev_alloc_skb(RX_BUF_SIZE)) == NULL) {
/*
@@ -1775,7 +1775,7 @@
}
/* This situation should never happen, but due to
- some unknow bugs, it is possible that
+ some unknown bugs, it is possible that
we are working on NULL sk_buff :-( */
if (sis_priv->rx_skbuff[entry] == NULL) {
if (netif_msg_rx_err(sis_priv))
diff --git a/drivers/net/skfp/h/smc.h b/drivers/net/skfp/h/smc.h
index 1758d95..026a83b 100644
--- a/drivers/net/skfp/h/smc.h
+++ b/drivers/net/skfp/h/smc.h
@@ -393,10 +393,10 @@
*/
u_long mac_d_max ; /* MAC : D_Max timer value */
- u_long lct_short ; /* LCT : error threshhold */
- u_long lct_medium ; /* LCT : error threshhold */
- u_long lct_long ; /* LCT : error threshhold */
- u_long lct_extended ; /* LCT : error threshhold */
+ u_long lct_short ; /* LCT : error threshold */
+ u_long lct_medium ; /* LCT : error threshold */
+ u_long lct_long ; /* LCT : error threshold */
+ u_long lct_extended ; /* LCT : error threshold */
} ;
#ifdef DEBUG
diff --git a/drivers/net/skfp/skfddi.c b/drivers/net/skfp/skfddi.c
index b27156eaf..db216a7 100644
--- a/drivers/net/skfp/skfddi.c
+++ b/drivers/net/skfp/skfddi.c
@@ -1002,7 +1002,7 @@
}
break;
default:
- printk("ioctl for %s: unknow cmd: %04x\n", dev->name, ioc.cmd);
+ printk("ioctl for %s: unknown cmd: %04x\n", dev->name, ioc.cmd);
status = -EOPNOTSUPP;
} // switch
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 3943d89..044e681 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -2017,7 +2017,7 @@
netif_carrier_off(sky2->netdev);
- /* Turn on link LED */
+ /* Turn off link LED */
sky2_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_OFF);
if (netif_msg_link(sky2))
diff --git a/drivers/net/smsc911x.c b/drivers/net/smsc911x.c
index 4d0d5c5..20d6095 100644
--- a/drivers/net/smsc911x.c
+++ b/drivers/net/smsc911x.c
@@ -816,7 +816,7 @@
SMSC_TRACE(HW, "Passed Loop Back Test");
#endif /* USE_PHY_WORK_AROUND */
- SMSC_TRACE(HW, "phy initialised succesfully");
+ SMSC_TRACE(HW, "phy initialised successfully");
return 0;
}
diff --git a/drivers/net/smsc911x.h b/drivers/net/smsc911x.h
index b5716bd..016360c 100644
--- a/drivers/net/smsc911x.h
+++ b/drivers/net/smsc911x.h
@@ -30,7 +30,7 @@
#define SMSC_NAPI_WEIGHT 16
/* implements a PHY loopback test at initialisation time, to ensure a packet
- * can be succesfully looped back */
+ * can be successfully looped back */
#define USE_PHY_WORK_AROUND
#define DPRINTK(nlevel, klevel, fmt, args...) \
diff --git a/drivers/net/spider_net.c b/drivers/net/spider_net.c
index 782910c..2185248 100644
--- a/drivers/net/spider_net.c
+++ b/drivers/net/spider_net.c
@@ -410,7 +410,7 @@
* @card: card structure
* @descr: descriptor to re-init
*
- * Return 0 on succes, <0 on failure.
+ * Return 0 on success, <0 on failure.
*
* Allocates a new rx skb, iommu-maps it and attaches it to the
* descriptor. Mark the descriptor as activated, ready-to-use.
diff --git a/drivers/net/stmmac/gmac.c b/drivers/net/stmmac/gmac.c
index b624bb5..52586ee 100644
--- a/drivers/net/stmmac/gmac.c
+++ b/drivers/net/stmmac/gmac.c
@@ -112,7 +112,7 @@
" (threshold = %d)\n", txmode);
csr6 &= ~DMA_CONTROL_TSF;
csr6 &= DMA_CONTROL_TC_TX_MASK;
- /* Set the transmit threashold */
+ /* Set the transmit threshold */
if (txmode <= 32)
csr6 |= DMA_CONTROL_TTC_32;
else if (txmode <= 64)
diff --git a/drivers/net/stmmac/gmac.h b/drivers/net/stmmac/gmac.h
index 684a363..2e82d6c 100644
--- a/drivers/net/stmmac/gmac.h
+++ b/drivers/net/stmmac/gmac.h
@@ -154,14 +154,14 @@
#define DMA_CONTROL_DT 0x04000000 /* Disable Drop TCP/IP csum error */
#define DMA_CONTROL_RSF 0x02000000 /* Receive Store and Forward */
#define DMA_CONTROL_DFF 0x01000000 /* Disaable flushing */
-/* Theshold for Activating the FC */
+/* Threshold for Activating the FC */
enum rfa {
act_full_minus_1 = 0x00800000,
act_full_minus_2 = 0x00800200,
act_full_minus_3 = 0x00800400,
act_full_minus_4 = 0x00800600,
};
-/* Theshold for Deactivating the FC */
+/* Threshold for Deactivating the FC */
enum rfd {
deac_full_minus_1 = 0x00400000,
deac_full_minus_2 = 0x00400800,
diff --git a/drivers/net/tokenring/ibmtr.c b/drivers/net/tokenring/ibmtr.c
index 5db0270..66272f2 100644
--- a/drivers/net/tokenring/ibmtr.c
+++ b/drivers/net/tokenring/ibmtr.c
@@ -96,7 +96,7 @@
*
* Change by Mike Sullivan et al.:
* + added turbo card support. No need to use lanaid to configure
- * the adapter into isa compatiblity mode.
+ * the adapter into isa compatibility mode.
*
* Changes by Burt Silverman to allow the computer to behave nicely when
* a cable is pulled or not in place, or a PCMCIA card is removed hot.
diff --git a/drivers/net/tokenring/smctr.c b/drivers/net/tokenring/smctr.c
index 427a897..5401d86 100644
--- a/drivers/net/tokenring/smctr.c
+++ b/drivers/net/tokenring/smctr.c
@@ -426,7 +426,7 @@
smctr_malloc(dev, 1L);
/* Allocate Non-MAC receive data buffers.
- * To guarantee a minimum of 256 contigous memory to
+ * To guarantee a minimum of 256 contiguous memory to
* UM_Receive_Packet's lookahead pointer, before a page
* change or ring end is encountered, place each rx buffer on
* a 256 byte boundary.
diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c
index 9f44c99..afaf088 100644
--- a/drivers/net/ucc_geth.c
+++ b/drivers/net/ucc_geth.c
@@ -3798,7 +3798,7 @@
prop = of_get_property(np, "tx-clock", NULL);
if (!prop) {
printk(KERN_ERR
- "ucc_geth: mising tx-clock-name property\n");
+ "ucc_geth: missing tx-clock-name property\n");
return -EINVAL;
}
if ((*prop < QE_CLK_NONE) || (*prop > QE_CLK24)) {
diff --git a/drivers/net/ucc_geth.h b/drivers/net/ucc_geth.h
index 03a6ca0..a007e2a 100644
--- a/drivers/net/ucc_geth.h
+++ b/drivers/net/ucc_geth.h
@@ -80,16 +80,16 @@
frames) received that were between 128
(Including FCS length==4) and 255 octets */
u32 txok; /* Total number of octets residing in frames
- that where involved in succesfull
+ that where involved in successfull
transmission */
u16 txcf; /* Total number of PAUSE control frames
transmitted by this MAC */
u8 res4[0x2];
u32 tmca; /* Total number of frames that were transmitted
- succesfully with the group address bit set
+ successfully with the group address bit set
that are not broadcast frames */
u32 tbca; /* Total number of frames transmitted
- succesfully that had destination address
+ successfully that had destination address
field equal to the broadcast address */
u32 rxfok; /* Total number of frames received OK */
u32 rxbok; /* Total number of octets received OK */
@@ -98,9 +98,9 @@
HW because it includes octets in frames that
never even reach the UCC */
u32 rmca; /* Total number of frames that were received
- succesfully with the group address bit set
+ successfully with the group address bit set
that are not broadcast frames */
- u32 rbca; /* Total number of frames received succesfully
+ u32 rbca; /* Total number of frames received successfully
that had destination address equal to the
broadcast address */
u32 scar; /* Statistics carry register */
@@ -759,15 +759,15 @@
frames) received that were between 128
(Including FCS length==4) and 255 octets */
u32 txok; /* Total number of octets residing in frames
- that where involved in succesfull
+ that where involved in successfull
transmission */
u16 txcf; /* Total number of PAUSE control frames
transmitted by this MAC */
u32 tmca; /* Total number of frames that were transmitted
- succesfully with the group address bit set
+ successfully with the group address bit set
that are not broadcast frames */
u32 tbca; /* Total number of frames transmitted
- succesfully that had destination address
+ successfully that had destination address
field equal to the broadcast address */
u32 rxfok; /* Total number of frames received OK */
u32 rxbok; /* Total number of octets received OK */
@@ -776,9 +776,9 @@
HW because it includes octets in frames that
never even reach the UCC */
u32 rmca; /* Total number of frames that were received
- succesfully with the group address bit set
+ successfully with the group address bit set
that are not broadcast frames */
- u32 rbca; /* Total number of frames received succesfully
+ u32 rbca; /* Total number of frames received successfully
that had destination address equal to the
broadcast address */
} __attribute__ ((packed));
diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c
index c6c9222..0c3c738 100644
--- a/drivers/net/usb/smsc95xx.c
+++ b/drivers/net/usb/smsc95xx.c
@@ -748,7 +748,7 @@
mii_nway_restart(&dev->mii);
if (netif_msg_ifup(dev))
- devdbg(dev, "phy initialised succesfully");
+ devdbg(dev, "phy initialised successfully");
return 0;
}
diff --git a/drivers/net/wan/hdlc_fr.c b/drivers/net/wan/hdlc_fr.c
index a7d4fc1..0e52993 100644
--- a/drivers/net/wan/hdlc_fr.c
+++ b/drivers/net/wan/hdlc_fr.c
@@ -182,7 +182,7 @@
if (pvc->dlci == dlci)
return pvc;
if (pvc->dlci > dlci)
- return NULL; /* the listed is sorted */
+ return NULL; /* the list is sorted */
pvc = pvc->next;
}
diff --git a/drivers/net/wan/lmc/lmc_main.c b/drivers/net/wan/lmc/lmc_main.c
index 2ebe935..4b6f27e 100644
--- a/drivers/net/wan/lmc/lmc_main.c
+++ b/drivers/net/wan/lmc/lmc_main.c
@@ -927,7 +927,7 @@
sc->lmc_media = &lmc_t1_media;
break;
default:
- printk(KERN_WARNING "%s: LMC UNKOWN CARD!\n", dev->name);
+ printk(KERN_WARNING "%s: LMC UNKNOWN CARD!\n", dev->name);
break;
}
diff --git a/drivers/net/wimax/i2400m/rx.c b/drivers/net/wimax/i2400m/rx.c
index e3d2a9d..7ddb173 100644
--- a/drivers/net/wimax/i2400m/rx.c
+++ b/drivers/net/wimax/i2400m/rx.c
@@ -1194,7 +1194,7 @@
* device. See the file header for the format. Run all checks on the
* buffer header, then run over each payload's descriptors, verify
* their consistency and act on each payload's contents. If
- * everything is succesful, update the device's statistics.
+ * everything is successful, update the device's statistics.
*
* Note: You need to set the skb to contain only the length of the
* received buffer; for that, use skb_trim(skb, RECEIVED_SIZE).
diff --git a/drivers/net/wireless/ath/ath5k/base.h b/drivers/net/wireless/ath/ath5k/base.h
index b72338c..952b3a2 100644
--- a/drivers/net/wireless/ath/ath5k/base.h
+++ b/drivers/net/wireless/ath/ath5k/base.h
@@ -36,7 +36,7 @@
*/
/*
- * Defintions for the Atheros Wireless LAN controller driver.
+ * Definitions for the Atheros Wireless LAN controller driver.
*/
#ifndef _DEV_ATH_ATHVAR_H
#define _DEV_ATH_ATHVAR_H
@@ -190,7 +190,7 @@
struct ath5k_txq *cabq; /* content after beacon */
int power_level; /* Requested tx power in dbm */
- bool assoc; /* assocate state */
+ bool assoc; /* associate state */
bool enable_beacon; /* true if beacons are on */
};
diff --git a/drivers/net/wireless/ath/ath5k/eeprom.c b/drivers/net/wireless/ath/ath5k/eeprom.c
index 644962a..81ea52c 100644
--- a/drivers/net/wireless/ath/ath5k/eeprom.c
+++ b/drivers/net/wireless/ath/ath5k/eeprom.c
@@ -1492,7 +1492,7 @@
* This info is used to calibrate the baseband power table. Imagine
* that for each channel there is a power curve that's hw specific
* (depends on amplifier etc) and we try to "correct" this curve using
- * offests we pass on to phy chip (baseband -> before amplifier) so that
+ * offsets we pass on to phy chip (baseband -> before amplifier) so that
* it can use accurate power values when setting tx power (takes amplifier's
* performance on each channel into account).
*
diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c
index bbfdcd5..72474c0 100644
--- a/drivers/net/wireless/ath/ath5k/phy.c
+++ b/drivers/net/wireless/ath/ath5k/phy.c
@@ -117,7 +117,7 @@
/*
* This code is used to optimize rf gain on different environments
- * (temprature mostly) based on feedback from a power detector.
+ * (temperature mostly) based on feedback from a power detector.
*
* It's only used on RF5111 and RF5112, later RF chips seem to have
* auto adjustment on hw -notice they have a much smaller BANK 7 and
@@ -2746,7 +2746,7 @@
/* Fill curves in reverse order
* from lower power (max gain)
* to higher power. Use curve -> idx
- * backmaping we did on eeprom init */
+ * backmapping we did on eeprom init */
u8 idx = pdg_curve_to_idx[pdg];
/* Grab the needed curves by index */
@@ -2848,7 +2848,7 @@
/* Now we have a set of curves for this
* channel on tmpL (x range is table_max - table_min
* and y values are tmpL[pdg][]) sorted in the same
- * order as EEPROM (because we've used the backmaping).
+ * order as EEPROM (because we've used the backmapping).
* So for RF5112 it's from higher power to lower power
* and for RF2413 it's from lower power to higher power.
* For RF5111 we only have one curve. */
diff --git a/drivers/net/wireless/ath/ath9k/rc.c b/drivers/net/wireless/ath/ath9k/rc.c
index c915954..70fdb9d 100644
--- a/drivers/net/wireless/ath/ath9k/rc.c
+++ b/drivers/net/wireless/ath/ath9k/rc.c
@@ -880,7 +880,7 @@
* Since this probe succeeded, we allow the next
* probe twice as soon. This allows the maxRate
* to move up faster if the probes are
- * succesful.
+ * successful.
*/
ath_rc_priv->probe_time =
now_msec - rate_table->probe_interval / 2;
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 077480c..71e5c99 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -2955,7 +2955,7 @@
/* Periodic work locking policy:
* The whole periodic work handler is protected by
* wl->mutex. If another lock is needed somewhere in the
- * pwork callchain, it's aquired in-place, where it's needed.
+ * pwork callchain, it's acquired in-place, where it's needed.
*/
static void b43_periodic_work_handler(struct work_struct *work)
{
diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c
index ab6a18c..4a905b6 100644
--- a/drivers/net/wireless/b43legacy/main.c
+++ b/drivers/net/wireless/b43legacy/main.c
@@ -2277,7 +2277,7 @@
/* Periodic work locking policy:
* The whole periodic work handler is protected by
* wl->mutex. If another lock is needed somewhere in the
- * pwork callchain, it's aquired in-place, where it's needed.
+ * pwork callchain, it's acquired in-place, where it's needed.
*/
static void b43legacy_periodic_work_handler(struct work_struct *work)
{
diff --git a/drivers/net/wireless/ipw2x00/ipw2100.c b/drivers/net/wireless/ipw2x00/ipw2100.c
index 17a9cb3..56afcf0 100644
--- a/drivers/net/wireless/ipw2x00/ipw2100.c
+++ b/drivers/net/wireless/ipw2x00/ipw2100.c
@@ -578,7 +578,7 @@
/* get number of entries */
field_count = *(((u16 *) & field_info) + 1);
- /* abort if no enought memory */
+ /* abort if no enough memory */
total_length = field_len * field_count;
if (total_length > *len) {
*len = total_length;
@@ -3127,7 +3127,7 @@
IPW_MAX_BDS)) {
/* TODO: Support merging buffers if more than
* IPW_MAX_BDS are used */
- IPW_DEBUG_INFO("%s: Maximum BD theshold exceeded. "
+ IPW_DEBUG_INFO("%s: Maximum BD threshold exceeded. "
"Increase fragmentation level.\n",
priv->net_dev->name);
}
@@ -6897,7 +6897,7 @@
range->max_qual.updated = 7; /* Updated all three */
range->avg_qual.qual = 70; /* > 8% missed beacons is 'bad' */
- /* TODO: Find real 'good' to 'bad' threshol value for RSSI */
+ /* TODO: Find real 'good' to 'bad' threshold value for RSSI */
range->avg_qual.level = 20 + IPW2100_RSSI_TO_DBM;
range->avg_qual.noise = 0;
range->avg_qual.updated = 7; /* Updated all three */
diff --git a/drivers/net/wireless/ipw2x00/ipw2200.c b/drivers/net/wireless/ipw2x00/ipw2200.c
index c28984a..09ddd3e 100644
--- a/drivers/net/wireless/ipw2x00/ipw2200.c
+++ b/drivers/net/wireless/ipw2x00/ipw2200.c
@@ -792,7 +792,7 @@
/* get number of entries */
field_count = *(((u16 *) & field_info) + 1);
- /* abort if not enought memory */
+ /* abort if not enough memory */
total_len = field_len * field_count;
if (total_len > *len) {
*len = total_len;
@@ -7760,7 +7760,7 @@
case SEC_LEVEL_0:
break;
default:
- printk(KERN_ERR "Unknow security level %d\n",
+ printk(KERN_ERR "Unknown security level %d\n",
priv->ieee->sec.level);
break;
}
@@ -8926,7 +8926,7 @@
range->max_qual.updated = 7; /* Updated all three */
range->avg_qual.qual = 70;
- /* TODO: Find real 'good' to 'bad' threshol value for RSSI */
+ /* TODO: Find real 'good' to 'bad' threshold value for RSSI */
range->avg_qual.level = 0; /* FIXME to real average level */
range->avg_qual.noise = 0;
range->avg_qual.updated = 7; /* Updated all three */
@@ -10299,7 +10299,7 @@
case SEC_LEVEL_0:
break;
default:
- printk(KERN_ERR "Unknow security level %d\n",
+ printk(KERN_ERR "Unknown security level %d\n",
priv->ieee->sec.level);
break;
}
diff --git a/drivers/net/wireless/ipw2x00/libipw_module.c b/drivers/net/wireless/ipw2x00/libipw_module.c
index bf21eb3..1ae0b2b 100644
--- a/drivers/net/wireless/ipw2x00/libipw_module.c
+++ b/drivers/net/wireless/ipw2x00/libipw_module.c
@@ -199,7 +199,7 @@
ieee->host_decrypt = 1;
ieee->host_mc_decrypt = 1;
- /* Host fragementation in Open mode. Default is enabled.
+ /* Host fragmentation in Open mode. Default is enabled.
* Note: host fragmentation is always enabled if host encryption
* is enabled. For cards can do hardware encryption, they must do
* hardware fragmentation as well. So we don't need a variable
diff --git a/drivers/net/wireless/iwmc3200wifi/hal.c b/drivers/net/wireless/iwmc3200wifi/hal.c
index c430418..d13c885 100644
--- a/drivers/net/wireless/iwmc3200wifi/hal.c
+++ b/drivers/net/wireless/iwmc3200wifi/hal.c
@@ -411,7 +411,7 @@
/*
* iwm_hal_send_host_cmd(): sends commands to the UMAC or the LMAC.
* Sending command to the LMAC is equivalent to sending a
- * regular UMAC command with the LMAC passtrough or the LMAC
+ * regular UMAC command with the LMAC passthrough or the LMAC
* wrapper UMAC command IDs.
*/
int iwm_hal_send_host_cmd(struct iwm_priv *iwm,
diff --git a/drivers/net/wireless/iwmc3200wifi/rx.c b/drivers/net/wireless/iwmc3200wifi/rx.c
index 72c27a3e..1c57c1f 100644
--- a/drivers/net/wireless/iwmc3200wifi/rx.c
+++ b/drivers/net/wireless/iwmc3200wifi/rx.c
@@ -1578,7 +1578,7 @@
kfree_skb(packet->skb);
break;
default:
- IWM_ERR(iwm, "Unknow ticket action: %d\n",
+ IWM_ERR(iwm, "Unknown ticket action: %d\n",
le16_to_cpu(ticket_node->ticket->action));
kfree_skb(packet->skb);
}
diff --git a/drivers/net/wireless/libertas/if_sdio.c b/drivers/net/wireless/libertas/if_sdio.c
index 09fcfad..7a73f62 100644
--- a/drivers/net/wireless/libertas/if_sdio.c
+++ b/drivers/net/wireless/libertas/if_sdio.c
@@ -993,7 +993,7 @@
}
if (i == ARRAY_SIZE(if_sdio_models)) {
- lbs_pr_err("unkown card model 0x%x\n", card->model);
+ lbs_pr_err("unknown card model 0x%x\n", card->model);
ret = -ENODEV;
goto free;
}
diff --git a/drivers/net/wireless/orinoco/hermes_dld.c b/drivers/net/wireless/orinoco/hermes_dld.c
index a3eefe1..84200da 100644
--- a/drivers/net/wireless/orinoco/hermes_dld.c
+++ b/drivers/net/wireless/orinoco/hermes_dld.c
@@ -550,7 +550,7 @@
#define DEFAULT_PDR(pid) default_pdr_data_##pid
-/* HWIF Compatiblity */
+/* HWIF Compatibility */
DEFINE_DEFAULT_PDR(0x0005, 10, "\x00\x00\x06\x00\x01\x00\x01\x00\x01\x00");
/* PPPPSign */
@@ -656,7 +656,7 @@
record_id + 1, pdi);
}
break;
- case 0x5: /* HWIF Compatiblity */
+ case 0x5: /* HWIF Compatibility */
default_pdi = (struct pdi *) &DEFAULT_PDR(0x0005);
break;
case 0x108: /* PPPPSign */
diff --git a/drivers/net/wireless/prism54/isl_ioctl.c b/drivers/net/wireless/prism54/isl_ioctl.c
index bc08464..f7f5c79 100644
--- a/drivers/net/wireless/prism54/isl_ioctl.c
+++ b/drivers/net/wireless/prism54/isl_ioctl.c
@@ -1897,7 +1897,7 @@
return 0;
}
-/* Setting policy also clears the MAC acl, even if we don't change the defaut
+/* Setting policy also clears the MAC acl, even if we don't change the default
* policy
*/
@@ -2323,7 +2323,7 @@
case DOT11_OID_BEACON:
send_formatted_event(priv,
- "Received a beacon from an unkown AP",
+ "Received a beacon from an unknown AP",
mlme, 0);
break;
diff --git a/drivers/net/wireless/rt2x00/rt2400pci.h b/drivers/net/wireless/rt2x00/rt2400pci.h
index 6c21ef6..c3dea69 100644
--- a/drivers/net/wireless/rt2x00/rt2400pci.h
+++ b/drivers/net/wireless/rt2x00/rt2400pci.h
@@ -35,7 +35,7 @@
/*
* Signal information.
- * Defaul offset is required for RSSI <-> dBm conversion.
+ * Default offset is required for RSSI <-> dBm conversion.
*/
#define DEFAULT_RSSI_OFFSET 100
diff --git a/drivers/net/wireless/rt2x00/rt2500pci.h b/drivers/net/wireless/rt2x00/rt2500pci.h
index b007567..c6bd1fc 100644
--- a/drivers/net/wireless/rt2x00/rt2500pci.h
+++ b/drivers/net/wireless/rt2x00/rt2500pci.h
@@ -46,7 +46,7 @@
/*
* Signal information.
- * Defaul offset is required for RSSI <-> dBm conversion.
+ * Default offset is required for RSSI <-> dBm conversion.
*/
#define DEFAULT_RSSI_OFFSET 121
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.h b/drivers/net/wireless/rt2x00/rt2500usb.h
index 341a704..b493306 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.h
+++ b/drivers/net/wireless/rt2x00/rt2500usb.h
@@ -46,7 +46,7 @@
/*
* Signal information.
- * Defaul offset is required for RSSI <-> dBm conversion.
+ * Default offset is required for RSSI <-> dBm conversion.
*/
#define DEFAULT_RSSI_OFFSET 120
diff --git a/drivers/net/wireless/rt2x00/rt61pci.h b/drivers/net/wireless/rt2x00/rt61pci.h
index 6f33f7f..8f13810 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.h
+++ b/drivers/net/wireless/rt2x00/rt61pci.h
@@ -37,7 +37,7 @@
/*
* Signal information.
- * Defaul offset is required for RSSI <-> dBm conversion.
+ * Default offset is required for RSSI <-> dBm conversion.
*/
#define DEFAULT_RSSI_OFFSET 120
diff --git a/drivers/net/wireless/rt2x00/rt73usb.h b/drivers/net/wireless/rt2x00/rt73usb.h
index e783a09..7942f81 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.h
+++ b/drivers/net/wireless/rt2x00/rt73usb.h
@@ -37,7 +37,7 @@
/*
* Signal information.
- * Defaul offset is required for RSSI <-> dBm conversion.
+ * Default offset is required for RSSI <-> dBm conversion.
*/
#define DEFAULT_RSSI_OFFSET 120
diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c
index 8a24373..cf51e8f 100644
--- a/drivers/net/wireless/zd1211rw/zd_mac.c
+++ b/drivers/net/wireless/zd1211rw/zd_mac.c
@@ -374,7 +374,7 @@
* zd_mac_tx_failed - callback for failed frames
* @dev: the mac80211 wireless device
*
- * This function is called if a frame couldn't be succesfully be
+ * This function is called if a frame couldn't be successfully be
* transferred. The first frame from the tx queue, will be selected and
* reported as error to the upper layers.
*/
diff --git a/drivers/parisc/ccio-dma.c b/drivers/parisc/ccio-dma.c
index a6b4a5a..f511e70 100644
--- a/drivers/parisc/ccio-dma.c
+++ b/drivers/parisc/ccio-dma.c
@@ -650,7 +650,7 @@
* Mark the I/O Pdir entries invalid and blow away the corresponding I/O
* TLB entries.
*
- * FIXME: at some threshhold it might be "cheaper" to just blow
+ * FIXME: at some threshold it might be "cheaper" to just blow
* away the entire I/O TLB instead of individual entries.
*
* FIXME: Uturn has 256 TLB entries. We don't need to purge every
diff --git a/drivers/parisc/eisa_eeprom.c b/drivers/parisc/eisa_eeprom.c
index 8c0b26e9..cce00ed 100644
--- a/drivers/parisc/eisa_eeprom.c
+++ b/drivers/parisc/eisa_eeprom.c
@@ -75,17 +75,8 @@
return ret;
}
-static int eisa_eeprom_ioctl(struct inode *inode, struct file *file,
- unsigned int cmd,
- unsigned long arg)
-{
- return -ENOTTY;
-}
-
static int eisa_eeprom_open(struct inode *inode, struct file *file)
{
- cycle_kernel_lock();
-
if (file->f_mode & FMODE_WRITE)
return -EINVAL;
@@ -104,7 +95,6 @@
.owner = THIS_MODULE,
.llseek = eisa_eeprom_llseek,
.read = eisa_eeprom_read,
- .ioctl = eisa_eeprom_ioctl,
.open = eisa_eeprom_open,
.release = eisa_eeprom_release,
};
diff --git a/drivers/pci/hotplug/acpi_pcihp.c b/drivers/pci/hotplug/acpi_pcihp.c
index a73028e..0f32571 100644
--- a/drivers/pci/hotplug/acpi_pcihp.c
+++ b/drivers/pci/hotplug/acpi_pcihp.c
@@ -471,7 +471,7 @@
return found;
acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, 1,
- check_hotplug, (void *)&found, NULL);
+ check_hotplug, NULL, (void *)&found, NULL);
return found;
}
EXPORT_SYMBOL_GPL(acpi_pci_detect_ejectable);
diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index 58d25a1..df1b0ea 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -266,7 +266,7 @@
int found = acpi_pci_detect_ejectable(handle);
if (!found) {
acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, (u32)1,
- is_pci_dock_device, (void *)&found, NULL);
+ is_pci_dock_device, NULL, (void *)&found, NULL);
}
return found;
}
@@ -281,7 +281,7 @@
/* register all slot objects under this bridge */
status = acpi_walk_namespace(ACPI_TYPE_DEVICE, bridge->handle, (u32)1,
- register_slot, bridge, NULL);
+ register_slot, NULL, bridge, NULL);
if (ACPI_FAILURE(status)) {
list_del(&bridge->list);
return;
@@ -447,7 +447,7 @@
/* search P2P bridges under this p2p bridge */
status = acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, (u32)1,
- find_p2p_bridge, NULL, NULL);
+ find_p2p_bridge, NULL, NULL, NULL);
if (ACPI_FAILURE(status))
warn("find_p2p_bridge failed (error code = 0x%x)\n", status);
@@ -485,7 +485,7 @@
/* search P2P bridges under this host bridge */
status = acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, (u32)1,
- find_p2p_bridge, NULL, NULL);
+ find_p2p_bridge, NULL, NULL, NULL);
if (ACPI_FAILURE(status))
warn("find_p2p_bridge failed (error code = 0x%x)\n", status);
@@ -573,7 +573,7 @@
/* cleanup p2p bridges under this P2P bridge
in a depth-first manner */
acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, (u32)1,
- cleanup_p2p_bridge, NULL, NULL);
+ cleanup_p2p_bridge, NULL, NULL, NULL);
bridge = acpiphp_handle_to_bridge(handle);
if (bridge)
@@ -589,7 +589,7 @@
/* cleanup p2p bridges under this host bridge
in a depth-first manner */
acpi_walk_namespace(ACPI_TYPE_DEVICE, handle,
- (u32)1, cleanup_p2p_bridge, NULL, NULL);
+ (u32)1, cleanup_p2p_bridge, NULL, NULL, NULL);
/*
* On root bridges with hotplug slots directly underneath (ie,
@@ -778,7 +778,7 @@
{
ioapic_add(handle, 0, NULL, NULL);
acpi_walk_namespace(ACPI_TYPE_DEVICE, handle,
- ACPI_UINT32_MAX, ioapic_add, NULL, NULL);
+ ACPI_UINT32_MAX, ioapic_add, NULL, NULL, NULL);
return 0;
}
@@ -786,7 +786,7 @@
{
ioapic_remove(handle, 0, NULL, NULL);
acpi_walk_namespace(ACPI_TYPE_DEVICE, handle,
- ACPI_UINT32_MAX, ioapic_remove, NULL, NULL);
+ ACPI_UINT32_MAX, ioapic_remove, NULL, NULL, NULL);
return 0;
}
@@ -1367,7 +1367,7 @@
bridge = acpiphp_handle_to_bridge(handle);
if (type == ACPI_NOTIFY_BUS_CHECK) {
acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, ACPI_UINT32_MAX,
- count_sub_bridges, &num_sub_bridges, NULL);
+ count_sub_bridges, NULL, &num_sub_bridges, NULL);
}
if (!bridge && !num_sub_bridges) {
@@ -1388,7 +1388,7 @@
}
if (num_sub_bridges)
acpi_walk_namespace(ACPI_TYPE_DEVICE, handle,
- ACPI_UINT32_MAX, check_sub_bridges, NULL, NULL);
+ ACPI_UINT32_MAX, check_sub_bridges, NULL, NULL, NULL);
break;
case ACPI_NOTIFY_DEVICE_CHECK:
@@ -1512,7 +1512,7 @@
int num = 0;
acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
- ACPI_UINT32_MAX, find_root_bridges, &num, NULL);
+ ACPI_UINT32_MAX, find_root_bridges, NULL, &num, NULL);
if (num <= 0)
return -1;
diff --git a/drivers/pci/hotplug/acpiphp_ibm.c b/drivers/pci/hotplug/acpiphp_ibm.c
index e7be66d..aa5df48 100644
--- a/drivers/pci/hotplug/acpiphp_ibm.c
+++ b/drivers/pci/hotplug/acpiphp_ibm.c
@@ -434,7 +434,7 @@
dbg("%s\n", __func__);
if (acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
- ACPI_UINT32_MAX, ibm_find_acpi_device,
+ ACPI_UINT32_MAX, ibm_find_acpi_device, NULL,
&ibm_acpi_handle, NULL) != FOUND_APCI) {
err("%s: acpi_walk_namespace failed\n", __func__);
retval = -ENODEV;
diff --git a/drivers/platform/Kconfig b/drivers/platform/Kconfig
index 9652c3f..8390dca 100644
--- a/drivers/platform/Kconfig
+++ b/drivers/platform/Kconfig
@@ -1,5 +1,3 @@
-# drivers/platform/Kconfig
-
if X86
source "drivers/platform/x86/Kconfig"
endif
diff --git a/drivers/platform/x86/intel_menlow.c b/drivers/platform/x86/intel_menlow.c
index 29432a5..f0a90a6 100644
--- a/drivers/platform/x86/intel_menlow.c
+++ b/drivers/platform/x86/intel_menlow.c
@@ -510,7 +510,7 @@
/* Looking for sensors in each ACPI thermal zone */
status = acpi_walk_namespace(ACPI_TYPE_THERMAL, ACPI_ROOT_OBJECT,
ACPI_UINT32_MAX,
- intel_menlow_register_sensor, NULL, NULL);
+ intel_menlow_register_sensor, NULL, NULL, NULL);
if (ACPI_FAILURE(status))
return -ENODEV;
diff --git a/drivers/platform/x86/sony-laptop.c b/drivers/platform/x86/sony-laptop.c
index a2a742c..7a2cc8a 100644
--- a/drivers/platform/x86/sony-laptop.c
+++ b/drivers/platform/x86/sony-laptop.c
@@ -1203,7 +1203,7 @@
if (debug) {
status = acpi_walk_namespace(ACPI_TYPE_METHOD, sony_nc_acpi_handle,
- 1, sony_walk_callback, NULL, NULL);
+ 1, sony_walk_callback, NULL, NULL, NULL);
if (ACPI_FAILURE(status)) {
printk(KERN_WARNING DRV_PFX "unable to walk acpi resources\n");
result = -ENODEV;
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index a848c7e..0ed8480 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -1087,7 +1087,7 @@
*/
status = acpi_walk_namespace(ACPI_TYPE_METHOD, vid_handle, 3,
- tpacpi_acpi_walk_find_bcl, NULL,
+ tpacpi_acpi_walk_find_bcl, NULL, NULL,
&bcl_ptr);
if (ACPI_SUCCESS(status) && bcl_levels > 2) {
@@ -6545,7 +6545,7 @@
* The speeds are stored on handles
* (FANA:FAN9), (FANC:FANB), (FANE:FAND).
*
- * There are three default speed sets, acessible as handles:
+ * There are three default speed sets, accessible as handles:
* FS1L,FS1M,FS1H; FS2L,FS2M,FS2H; FS3L,FS3M,FS3H
*
* ACPI DSDT switches which set is in use depending on various
diff --git a/drivers/pnp/pnpbios/rsparser.c b/drivers/pnp/pnpbios/rsparser.c
index 87b4f49..a5135eb 100644
--- a/drivers/pnp/pnpbios/rsparser.c
+++ b/drivers/pnp/pnpbios/rsparser.c
@@ -191,7 +191,7 @@
return (unsigned char *)p;
break;
- default: /* an unkown tag */
+ default: /* an unknown tag */
len_err:
dev_err(&dev->dev, "unknown tag %#x length %d\n",
tag, len);
@@ -405,7 +405,7 @@
case SMALL_TAG_END:
return p + 2;
- default: /* an unkown tag */
+ default: /* an unknown tag */
len_err:
dev_err(&dev->dev, "unknown tag %#x length %d\n",
tag, len);
@@ -475,7 +475,7 @@
return (unsigned char *)p;
break;
- default: /* an unkown tag */
+ default: /* an unknown tag */
len_err:
dev_err(&dev->dev, "unknown tag %#x length %d\n",
tag, len);
@@ -744,7 +744,7 @@
return (unsigned char *)p;
break;
- default: /* an unkown tag */
+ default: /* an unknown tag */
len_err:
dev_err(&dev->dev, "unknown tag %#x length %d\n",
tag, len);
diff --git a/drivers/ps3/ps3-sys-manager.c b/drivers/ps3/ps3-sys-manager.c
index 88cb740..3cbaf18 100644
--- a/drivers/ps3/ps3-sys-manager.c
+++ b/drivers/ps3/ps3-sys-manager.c
@@ -46,7 +46,7 @@
/**
* struct ps3_sys_manager_header - System manager message header.
* @version: Header version, currently 1.
- * @size: Header size in bytes, curently 16.
+ * @size: Header size in bytes, currently 16.
* @payload_size: Message payload size in bytes.
* @service_id: Message type, one of enum ps3_sys_manager_service_id.
* @request_tag: Unique number to identify reply.
diff --git a/drivers/rtc/rtc-ds1302.c b/drivers/rtc/rtc-ds1302.c
index d490628..1e73c8f 100644
--- a/drivers/rtc/rtc-ds1302.c
+++ b/drivers/rtc/rtc-ds1302.c
@@ -201,7 +201,7 @@
.name = DRV_NAME,
.owner = THIS_MODULE,
},
- .remove = __exit_p(ds1302_rtc_remove),
+ .remove = __devexit_p(ds1302_rtc_remove),
};
static int __init ds1302_rtc_init(void)
diff --git a/drivers/rtc/rtc-ds1511.c b/drivers/rtc/rtc-ds1511.c
index 0b6b773..539676e 100644
--- a/drivers/rtc/rtc-ds1511.c
+++ b/drivers/rtc/rtc-ds1511.c
@@ -2,7 +2,7 @@
* An rtc driver for the Dallas DS1511
*
* Copyright (C) 2006 Atsushi Nemoto <anemo@mba.ocn.ne.jp>
- * Copyright (C) 2007 Andrew Sharp <andy.sharp@onstor.com>
+ * Copyright (C) 2007 Andrew Sharp <andy.sharp@lsi.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -636,7 +636,7 @@
module_init(ds1511_rtc_init);
module_exit(ds1511_rtc_exit);
-MODULE_AUTHOR("Andrew Sharp <andy.sharp@onstor.com>");
+MODULE_AUTHOR("Andrew Sharp <andy.sharp@lsi.com>");
MODULE_DESCRIPTION("Dallas DS1511 RTC driver");
MODULE_LICENSE("GPL");
MODULE_VERSION(DRV_VERSION);
diff --git a/drivers/rtc/rtc-stk17ta8.c b/drivers/rtc/rtc-stk17ta8.c
index 7d1547b..d491eb2 100644
--- a/drivers/rtc/rtc-stk17ta8.c
+++ b/drivers/rtc/rtc-stk17ta8.c
@@ -286,7 +286,7 @@
.write = stk17ta8_nvram_write,
};
-static int __init stk17ta8_rtc_probe(struct platform_device *pdev)
+static int __devinit stk17ta8_rtc_probe(struct platform_device *pdev)
{
struct rtc_device *rtc;
struct resource *res;
diff --git a/drivers/rtc/rtc-v3020.c b/drivers/rtc/rtc-v3020.c
index 423cd5a..ad741af 100644
--- a/drivers/rtc/rtc-v3020.c
+++ b/drivers/rtc/rtc-v3020.c
@@ -335,7 +335,7 @@
goto err_io;
}
- /* Make sure frequency measurment mode, test modes, and lock
+ /* Make sure frequency measurement mode, test modes, and lock
* are all disabled */
v3020_set_reg(chip, V3020_STATUS_0, 0x0);
diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c
index aaccc8e..fdb2e7c 100644
--- a/drivers/s390/block/dasd.c
+++ b/drivers/s390/block/dasd.c
@@ -24,7 +24,6 @@
#include <asm/ccwdev.h>
#include <asm/ebcdic.h>
#include <asm/idals.h>
-#include <asm/todclk.h>
#include <asm/itcw.h>
/* This is ugly... */
@@ -64,6 +63,7 @@
static void dasd_return_cqr_cb(struct dasd_ccw_req *, void *);
static void dasd_device_timeout(unsigned long);
static void dasd_block_timeout(unsigned long);
+static void __dasd_process_erp(struct dasd_device *, struct dasd_ccw_req *);
/*
* SECTION: Operations on the device structure.
@@ -960,7 +960,7 @@
device = (struct dasd_device *) ptr;
spin_lock_irqsave(get_ccwdev_lock(device->cdev), flags);
/* re-activate request queue */
- device->stopped &= ~DASD_STOPPED_PENDING;
+ dasd_device_remove_stop_bits(device, DASD_STOPPED_PENDING);
spin_unlock_irqrestore(get_ccwdev_lock(device->cdev), flags);
dasd_schedule_device_bh(device);
}
@@ -994,10 +994,9 @@
return;
cqr = (struct dasd_ccw_req *) intparm;
if (cqr->status != DASD_CQR_IN_IO) {
- DBF_EVENT(DBF_DEBUG,
- "invalid status in handle_killed_request: "
- "bus_id %s, status %02x",
- dev_name(&cdev->dev), cqr->status);
+ DBF_EVENT_DEVID(DBF_DEBUG, cdev,
+ "invalid status in handle_killed_request: "
+ "%02x", cqr->status);
return;
}
@@ -1023,7 +1022,7 @@
/* First of all start sense subsystem status request. */
dasd_eer_snss(device);
- device->stopped &= ~DASD_STOPPED_PENDING;
+ dasd_device_remove_stop_bits(device, DASD_STOPPED_PENDING);
dasd_schedule_device_bh(device);
if (device->block)
dasd_schedule_block_bh(device->block);
@@ -1045,12 +1044,13 @@
case -EIO:
break;
case -ETIMEDOUT:
- DBF_EVENT(DBF_WARNING, "%s(%s): request timed out\n",
- __func__, dev_name(&cdev->dev));
+ DBF_EVENT_DEVID(DBF_WARNING, cdev, "%s: "
+ "request timed out\n", __func__);
break;
default:
- DBF_EVENT(DBF_WARNING, "%s(%s): unknown error %ld\n",
- __func__, dev_name(&cdev->dev), PTR_ERR(irb));
+ DBF_EVENT_DEVID(DBF_WARNING, cdev, "%s: "
+ "unknown error %ld\n", __func__,
+ PTR_ERR(irb));
}
dasd_handle_killed_request(cdev, intparm);
return;
@@ -1405,6 +1405,20 @@
tasklet_hi_schedule(&device->tasklet);
}
+void dasd_device_set_stop_bits(struct dasd_device *device, int bits)
+{
+ device->stopped |= bits;
+}
+EXPORT_SYMBOL_GPL(dasd_device_set_stop_bits);
+
+void dasd_device_remove_stop_bits(struct dasd_device *device, int bits)
+{
+ device->stopped &= ~bits;
+ if (!device->stopped)
+ wake_up(&generic_waitq);
+}
+EXPORT_SYMBOL_GPL(dasd_device_remove_stop_bits);
+
/*
* Queue a request to the head of the device ccw_queue.
* Start the I/O if possible.
@@ -1465,28 +1479,126 @@
}
/*
+ * checks if error recovery is necessary, returns 1 if yes, 0 otherwise.
+ */
+static int __dasd_sleep_on_erp(struct dasd_ccw_req *cqr)
+{
+ struct dasd_device *device;
+ dasd_erp_fn_t erp_fn;
+
+ if (cqr->status == DASD_CQR_FILLED)
+ return 0;
+ device = cqr->startdev;
+ if (test_bit(DASD_CQR_FLAGS_USE_ERP, &cqr->flags)) {
+ if (cqr->status == DASD_CQR_TERMINATED) {
+ device->discipline->handle_terminated_request(cqr);
+ return 1;
+ }
+ if (cqr->status == DASD_CQR_NEED_ERP) {
+ erp_fn = device->discipline->erp_action(cqr);
+ erp_fn(cqr);
+ return 1;
+ }
+ if (cqr->status == DASD_CQR_FAILED)
+ dasd_log_sense(cqr, &cqr->irb);
+ if (cqr->refers) {
+ __dasd_process_erp(device, cqr);
+ return 1;
+ }
+ }
+ return 0;
+}
+
+static int __dasd_sleep_on_loop_condition(struct dasd_ccw_req *cqr)
+{
+ if (test_bit(DASD_CQR_FLAGS_USE_ERP, &cqr->flags)) {
+ if (cqr->refers) /* erp is not done yet */
+ return 1;
+ return ((cqr->status != DASD_CQR_DONE) &&
+ (cqr->status != DASD_CQR_FAILED));
+ } else
+ return (cqr->status == DASD_CQR_FILLED);
+}
+
+static int _dasd_sleep_on(struct dasd_ccw_req *maincqr, int interruptible)
+{
+ struct dasd_device *device;
+ int rc;
+ struct list_head ccw_queue;
+ struct dasd_ccw_req *cqr;
+
+ INIT_LIST_HEAD(&ccw_queue);
+ maincqr->status = DASD_CQR_FILLED;
+ device = maincqr->startdev;
+ list_add(&maincqr->blocklist, &ccw_queue);
+ for (cqr = maincqr; __dasd_sleep_on_loop_condition(cqr);
+ cqr = list_first_entry(&ccw_queue,
+ struct dasd_ccw_req, blocklist)) {
+
+ if (__dasd_sleep_on_erp(cqr))
+ continue;
+ if (cqr->status != DASD_CQR_FILLED) /* could be failed */
+ continue;
+
+ /* Non-temporary stop condition will trigger fail fast */
+ if (device->stopped & ~DASD_STOPPED_PENDING &&
+ test_bit(DASD_CQR_FLAGS_FAILFAST, &cqr->flags) &&
+ (!dasd_eer_enabled(device))) {
+ cqr->status = DASD_CQR_FAILED;
+ continue;
+ }
+
+ /* Don't try to start requests if device is stopped */
+ if (interruptible) {
+ rc = wait_event_interruptible(
+ generic_waitq, !(device->stopped));
+ if (rc == -ERESTARTSYS) {
+ cqr->status = DASD_CQR_FAILED;
+ maincqr->intrc = rc;
+ continue;
+ }
+ } else
+ wait_event(generic_waitq, !(device->stopped));
+
+ cqr->callback = dasd_wakeup_cb;
+ cqr->callback_data = (void *) &generic_waitq;
+ dasd_add_request_tail(cqr);
+ if (interruptible) {
+ rc = wait_event_interruptible(
+ generic_waitq, _wait_for_wakeup(cqr));
+ if (rc == -ERESTARTSYS) {
+ dasd_cancel_req(cqr);
+ /* wait (non-interruptible) for final status */
+ wait_event(generic_waitq,
+ _wait_for_wakeup(cqr));
+ cqr->status = DASD_CQR_FAILED;
+ maincqr->intrc = rc;
+ continue;
+ }
+ } else
+ wait_event(generic_waitq, _wait_for_wakeup(cqr));
+ }
+
+ maincqr->endclk = get_clock();
+ if ((maincqr->status != DASD_CQR_DONE) &&
+ (maincqr->intrc != -ERESTARTSYS))
+ dasd_log_sense(maincqr, &maincqr->irb);
+ if (maincqr->status == DASD_CQR_DONE)
+ rc = 0;
+ else if (maincqr->intrc)
+ rc = maincqr->intrc;
+ else
+ rc = -EIO;
+ return rc;
+}
+
+/*
* Queue a request to the tail of the device ccw_queue and wait for
* it's completion.
*/
int dasd_sleep_on(struct dasd_ccw_req *cqr)
{
- struct dasd_device *device;
- int rc;
-
- device = cqr->startdev;
-
- cqr->callback = dasd_wakeup_cb;
- cqr->callback_data = (void *) &generic_waitq;
- dasd_add_request_tail(cqr);
- wait_event(generic_waitq, _wait_for_wakeup(cqr));
-
- if (cqr->status == DASD_CQR_DONE)
- rc = 0;
- else if (cqr->intrc)
- rc = cqr->intrc;
- else
- rc = -EIO;
- return rc;
+ return _dasd_sleep_on(cqr, 0);
}
/*
@@ -1495,28 +1607,7 @@
*/
int dasd_sleep_on_interruptible(struct dasd_ccw_req *cqr)
{
- struct dasd_device *device;
- int rc;
-
- device = cqr->startdev;
- cqr->callback = dasd_wakeup_cb;
- cqr->callback_data = (void *) &generic_waitq;
- dasd_add_request_tail(cqr);
- rc = wait_event_interruptible(generic_waitq, _wait_for_wakeup(cqr));
- if (rc == -ERESTARTSYS) {
- dasd_cancel_req(cqr);
- /* wait (non-interruptible) for final status */
- wait_event(generic_waitq, _wait_for_wakeup(cqr));
- cqr->intrc = rc;
- }
-
- if (cqr->status == DASD_CQR_DONE)
- rc = 0;
- else if (cqr->intrc)
- rc = cqr->intrc;
- else
- rc = -EIO;
- return rc;
+ return _dasd_sleep_on(cqr, 1);
}
/*
@@ -1630,7 +1721,7 @@
block = (struct dasd_block *) ptr;
spin_lock_irqsave(get_ccwdev_lock(block->base->cdev), flags);
/* re-activate request queue */
- block->base->stopped &= ~DASD_STOPPED_PENDING;
+ dasd_device_remove_stop_bits(block->base, DASD_STOPPED_PENDING);
spin_unlock_irqrestore(get_ccwdev_lock(block->base->cdev), flags);
dasd_schedule_block_bh(block);
}
@@ -1657,11 +1748,10 @@
/*
* Process finished error recovery ccw.
*/
-static inline void __dasd_block_process_erp(struct dasd_block *block,
- struct dasd_ccw_req *cqr)
+static void __dasd_process_erp(struct dasd_device *device,
+ struct dasd_ccw_req *cqr)
{
dasd_erp_fn_t erp_fn;
- struct dasd_device *device = block->base;
if (cqr->status == DASD_CQR_DONE)
DBF_DEV_EVENT(DBF_NOTICE, device, "%s", "ERP successful");
@@ -1725,9 +1815,12 @@
*/
if (!list_empty(&block->ccw_queue))
break;
- spin_lock_irqsave(get_ccwdev_lock(basedev->cdev), flags);
- basedev->stopped |= DASD_STOPPED_PENDING;
- spin_unlock_irqrestore(get_ccwdev_lock(basedev->cdev), flags);
+ spin_lock_irqsave(
+ get_ccwdev_lock(basedev->cdev), flags);
+ dasd_device_set_stop_bits(basedev,
+ DASD_STOPPED_PENDING);
+ spin_unlock_irqrestore(
+ get_ccwdev_lock(basedev->cdev), flags);
dasd_block_set_timer(block, HZ/2);
break;
}
@@ -1813,7 +1906,7 @@
cqr->status = DASD_CQR_FILLED;
cqr->retries = 255;
spin_lock_irqsave(get_ccwdev_lock(base->cdev), flags);
- base->stopped |= DASD_STOPPED_QUIESCE;
+ dasd_device_set_stop_bits(base, DASD_STOPPED_QUIESCE);
spin_unlock_irqrestore(get_ccwdev_lock(base->cdev),
flags);
goto restart;
@@ -1821,7 +1914,7 @@
/* Process finished ERP request. */
if (cqr->refers) {
- __dasd_block_process_erp(block, cqr);
+ __dasd_process_erp(base, cqr);
goto restart;
}
@@ -1952,7 +2045,7 @@
/* Process finished ERP request. */
if (cqr->refers) {
spin_lock_bh(&block->queue_lock);
- __dasd_block_process_erp(block, cqr);
+ __dasd_process_erp(block->base, cqr);
spin_unlock_bh(&block->queue_lock);
/* restart list_for_xx loop since dasd_process_erp
* might remove multiple elements */
@@ -2208,18 +2301,11 @@
{
int ret;
- ret = ccw_device_set_options(cdev, CCWDEV_DO_PATHGROUP);
- if (ret) {
- DBF_EVENT(DBF_WARNING,
- "dasd_generic_probe: could not set ccw-device options "
- "for %s\n", dev_name(&cdev->dev));
- return ret;
- }
ret = dasd_add_sysfs_files(cdev);
if (ret) {
- DBF_EVENT(DBF_WARNING,
- "dasd_generic_probe: could not add sysfs entries "
- "for %s\n", dev_name(&cdev->dev));
+ DBF_EVENT_DEVID(DBF_WARNING, cdev, "%s",
+ "dasd_generic_probe: could not add "
+ "sysfs entries");
return ret;
}
cdev->handler = &dasd_int_handler;
@@ -2418,16 +2504,16 @@
cqr->status = DASD_CQR_QUEUED;
cqr->retries++;
}
- device->stopped |= DASD_STOPPED_DC_WAIT;
+ dasd_device_set_stop_bits(device, DASD_STOPPED_DC_WAIT);
dasd_device_clear_timer(device);
dasd_schedule_device_bh(device);
ret = 1;
break;
case CIO_OPER:
/* FIXME: add a sanity check. */
- device->stopped &= ~DASD_STOPPED_DC_WAIT;
+ dasd_device_remove_stop_bits(device, DASD_STOPPED_DC_WAIT);
if (device->stopped & DASD_UNRESUMED_PM) {
- device->stopped &= ~DASD_UNRESUMED_PM;
+ dasd_device_remove_stop_bits(device, DASD_UNRESUMED_PM);
dasd_restore_device(device);
ret = 1;
break;
@@ -2452,7 +2538,7 @@
if (IS_ERR(device))
return PTR_ERR(device);
/* disallow new I/O */
- device->stopped |= DASD_STOPPED_PM;
+ dasd_device_set_stop_bits(device, DASD_STOPPED_PM);
/* clear active requests */
INIT_LIST_HEAD(&freeze_queue);
spin_lock_irq(get_ccwdev_lock(cdev));
@@ -2504,14 +2590,18 @@
return PTR_ERR(device);
/* allow new IO again */
- device->stopped &= ~DASD_STOPPED_PM;
- device->stopped &= ~DASD_UNRESUMED_PM;
+ dasd_device_remove_stop_bits(device,
+ (DASD_STOPPED_PM | DASD_UNRESUMED_PM));
dasd_schedule_device_bh(device);
- if (device->discipline->restore)
+ /*
+ * call discipline restore function
+ * if device is stopped do nothing e.g. for disconnected devices
+ */
+ if (device->discipline->restore && !(device->stopped))
rc = device->discipline->restore(device);
- if (rc)
+ if (rc || device->stopped)
/*
* if the resume failed for the DASD we put it in
* an UNRESUMED stop state
@@ -2561,8 +2651,7 @@
cqr->startdev = device;
cqr->memdev = device;
cqr->expires = 10*HZ;
- clear_bit(DASD_CQR_FLAGS_USE_ERP, &cqr->flags);
- cqr->retries = 2;
+ cqr->retries = 256;
cqr->buildclk = get_clock();
cqr->status = DASD_CQR_FILLED;
return cqr;
diff --git a/drivers/s390/block/dasd_3990_erp.c b/drivers/s390/block/dasd_3990_erp.c
index e8ff7b0..44796ba 100644
--- a/drivers/s390/block/dasd_3990_erp.c
+++ b/drivers/s390/block/dasd_3990_erp.c
@@ -12,7 +12,6 @@
#include <linux/timer.h>
#include <linux/slab.h>
#include <asm/idals.h>
-#include <asm/todclk.h>
#define PRINTK_HEADER "dasd_erp(3990): "
@@ -70,8 +69,7 @@
* processing until the started timer has expired or an related
* interrupt was received.
*/
-static void
-dasd_3990_erp_block_queue(struct dasd_ccw_req * erp, int expires)
+static void dasd_3990_erp_block_queue(struct dasd_ccw_req *erp, int expires)
{
struct dasd_device *device = erp->startdev;
@@ -81,10 +79,13 @@
"blocking request queue for %is", expires/HZ);
spin_lock_irqsave(get_ccwdev_lock(device->cdev), flags);
- device->stopped |= DASD_STOPPED_PENDING;
+ dasd_device_set_stop_bits(device, DASD_STOPPED_PENDING);
spin_unlock_irqrestore(get_ccwdev_lock(device->cdev), flags);
erp->status = DASD_CQR_FILLED;
- dasd_block_set_timer(device->block, expires);
+ if (erp->block)
+ dasd_block_set_timer(erp->block, expires);
+ else
+ dasd_device_set_timer(device, expires);
}
/*
@@ -243,9 +244,13 @@
* DESCRIPTION
* Setup ERP to do the ERP action 1 (see Reference manual).
* Repeat the operation on a different channel path.
- * If all alternate paths have been tried, the request is posted with a
- * permanent error.
- * Note: duplex handling is not implemented (yet).
+ * As deviation from the recommended recovery action, we reset the path mask
+ * after we have tried each path and go through all paths a second time.
+ * This will cover situations where only one path at a time is actually down,
+ * but all paths fail and recover just with the same sequence and timing as
+ * we try to use them (flapping links).
+ * If all alternate paths have been tried twice, the request is posted with
+ * a permanent error.
*
* PARAMETER
* erp pointer to the current ERP
@@ -254,17 +259,25 @@
* erp pointer to the ERP
*
*/
-static struct dasd_ccw_req *
-dasd_3990_erp_action_1(struct dasd_ccw_req * erp)
+static struct dasd_ccw_req *dasd_3990_erp_action_1_sec(struct dasd_ccw_req *erp)
{
-
- erp->function = dasd_3990_erp_action_1;
-
+ erp->function = dasd_3990_erp_action_1_sec;
dasd_3990_erp_alternate_path(erp);
-
return erp;
+}
-} /* end dasd_3990_erp_action_1 */
+static struct dasd_ccw_req *dasd_3990_erp_action_1(struct dasd_ccw_req *erp)
+{
+ erp->function = dasd_3990_erp_action_1;
+ dasd_3990_erp_alternate_path(erp);
+ if (erp->status == DASD_CQR_FAILED) {
+ erp->status = DASD_CQR_FILLED;
+ erp->retries = 10;
+ erp->lpm = LPM_ANYPATH;
+ erp->function = dasd_3990_erp_action_1_sec;
+ }
+ return erp;
+} /* end dasd_3990_erp_action_1(b) */
/*
* DASD_3990_ERP_ACTION_4
@@ -2295,6 +2308,7 @@
return cqr;
}
+ ccw = cqr->cpaddr;
if (cqr->cpmode == 1) {
/* make a shallow copy of the original tcw but set new tsb */
erp->cpmode = 1;
@@ -2303,6 +2317,9 @@
tsb = (struct tsb *) &tcw[1];
*tcw = *((struct tcw *)cqr->cpaddr);
tcw->tsb = (long)tsb;
+ } else if (ccw->cmd_code == DASD_ECKD_CCW_PSF) {
+ /* PSF cannot be chained from NOOP/TIC */
+ erp->cpaddr = cqr->cpaddr;
} else {
/* initialize request with default TIC to current ERP/CQR */
ccw = erp->cpaddr;
@@ -2487,6 +2504,8 @@
erp = dasd_3990_erp_action_1(erp);
+ } else if (erp->function == dasd_3990_erp_action_1_sec) {
+ erp = dasd_3990_erp_action_1_sec(erp);
} else if (erp->function == dasd_3990_erp_action_5) {
/* retries have not been successful */
diff --git a/drivers/s390/block/dasd_alias.c b/drivers/s390/block/dasd_alias.c
index 70a008c..fd12317 100644
--- a/drivers/s390/block/dasd_alias.c
+++ b/drivers/s390/block/dasd_alias.c
@@ -152,6 +152,7 @@
INIT_WORK(&lcu->suc_data.worker, summary_unit_check_handling_work);
INIT_DELAYED_WORK(&lcu->ruac_data.dwork, lcu_update_work);
spin_lock_init(&lcu->lock);
+ init_completion(&lcu->lcu_setup);
return lcu;
out_err4:
@@ -240,6 +241,67 @@
}
/*
+ * The first device to be registered on an LCU will have to do
+ * some additional setup steps to configure that LCU on the
+ * storage server. All further devices should wait with their
+ * initialization until the first device is done.
+ * To synchronize this work, the first device will call
+ * dasd_alias_lcu_setup_complete when it is done, and all
+ * other devices will wait for it with dasd_alias_wait_for_lcu_setup.
+ */
+void dasd_alias_lcu_setup_complete(struct dasd_device *device)
+{
+ struct dasd_eckd_private *private;
+ unsigned long flags;
+ struct alias_server *server;
+ struct alias_lcu *lcu;
+ struct dasd_uid *uid;
+
+ private = (struct dasd_eckd_private *) device->private;
+ uid = &private->uid;
+ lcu = NULL;
+ spin_lock_irqsave(&aliastree.lock, flags);
+ server = _find_server(uid);
+ if (server)
+ lcu = _find_lcu(server, uid);
+ spin_unlock_irqrestore(&aliastree.lock, flags);
+ if (!lcu) {
+ DBF_EVENT_DEVID(DBF_ERR, device->cdev,
+ "could not find lcu for %04x %02x",
+ uid->ssid, uid->real_unit_addr);
+ WARN_ON(1);
+ return;
+ }
+ complete_all(&lcu->lcu_setup);
+}
+
+void dasd_alias_wait_for_lcu_setup(struct dasd_device *device)
+{
+ struct dasd_eckd_private *private;
+ unsigned long flags;
+ struct alias_server *server;
+ struct alias_lcu *lcu;
+ struct dasd_uid *uid;
+
+ private = (struct dasd_eckd_private *) device->private;
+ uid = &private->uid;
+ lcu = NULL;
+ spin_lock_irqsave(&aliastree.lock, flags);
+ server = _find_server(uid);
+ if (server)
+ lcu = _find_lcu(server, uid);
+ spin_unlock_irqrestore(&aliastree.lock, flags);
+ if (!lcu) {
+ DBF_EVENT_DEVID(DBF_ERR, device->cdev,
+ "could not find lcu for %04x %02x",
+ uid->ssid, uid->real_unit_addr);
+ WARN_ON(1);
+ return;
+ }
+ wait_for_completion(&lcu->lcu_setup);
+}
+
+/*
* This function removes a device from the scope of alias management.
* The complicated part is to make sure that it is not in use by
* any of the workers. If necessary cancel the work.
@@ -755,11 +817,11 @@
{
/* If pos == device then device is already locked! */
if (pos == device) {
- pos->stopped |= DASD_STOPPED_SU;
+ dasd_device_set_stop_bits(pos, DASD_STOPPED_SU);
return;
}
spin_lock(get_ccwdev_lock(pos->cdev));
- pos->stopped |= DASD_STOPPED_SU;
+ dasd_device_set_stop_bits(pos, DASD_STOPPED_SU);
spin_unlock(get_ccwdev_lock(pos->cdev));
}
@@ -793,26 +855,26 @@
list_for_each_entry(device, &lcu->active_devices, alias_list) {
spin_lock_irqsave(get_ccwdev_lock(device->cdev), flags);
- device->stopped &= ~DASD_STOPPED_SU;
+ dasd_device_remove_stop_bits(device, DASD_STOPPED_SU);
spin_unlock_irqrestore(get_ccwdev_lock(device->cdev), flags);
}
list_for_each_entry(device, &lcu->inactive_devices, alias_list) {
spin_lock_irqsave(get_ccwdev_lock(device->cdev), flags);
- device->stopped &= ~DASD_STOPPED_SU;
+ dasd_device_remove_stop_bits(device, DASD_STOPPED_SU);
spin_unlock_irqrestore(get_ccwdev_lock(device->cdev), flags);
}
list_for_each_entry(pavgroup, &lcu->grouplist, group) {
list_for_each_entry(device, &pavgroup->baselist, alias_list) {
spin_lock_irqsave(get_ccwdev_lock(device->cdev), flags);
- device->stopped &= ~DASD_STOPPED_SU;
+ dasd_device_remove_stop_bits(device, DASD_STOPPED_SU);
spin_unlock_irqrestore(get_ccwdev_lock(device->cdev),
flags);
}
list_for_each_entry(device, &pavgroup->aliaslist, alias_list) {
spin_lock_irqsave(get_ccwdev_lock(device->cdev), flags);
- device->stopped &= ~DASD_STOPPED_SU;
+ dasd_device_remove_stop_bits(device, DASD_STOPPED_SU);
spin_unlock_irqrestore(get_ccwdev_lock(device->cdev),
flags);
}
@@ -836,7 +898,8 @@
/* 2. reset summary unit check */
spin_lock_irqsave(get_ccwdev_lock(device->cdev), flags);
- device->stopped &= ~(DASD_STOPPED_SU | DASD_STOPPED_PENDING);
+ dasd_device_remove_stop_bits(device,
+ (DASD_STOPPED_SU | DASD_STOPPED_PENDING));
spin_unlock_irqrestore(get_ccwdev_lock(device->cdev), flags);
reset_summary_unit_check(lcu, device, suc_data->reason);
diff --git a/drivers/s390/block/dasd_diag.c b/drivers/s390/block/dasd_diag.c
index 4e49b4a..f64d0db 100644
--- a/drivers/s390/block/dasd_diag.c
+++ b/drivers/s390/block/dasd_diag.c
@@ -24,7 +24,6 @@
#include <asm/ebcdic.h>
#include <asm/io.h>
#include <asm/s390_ext.h>
-#include <asm/todclk.h>
#include <asm/vtoc.h>
#include <asm/diag.h>
@@ -145,6 +144,15 @@
mdsk_term_io(device);
rc = mdsk_init_io(device, device->block->bp_block, 0, NULL);
+ if (rc == 4) {
+ if (!(device->features & DASD_FEATURE_READONLY)) {
+ dev_warn(&device->cdev->dev,
+ "The access mode of a DIAG device changed"
+ " to read-only");
+ device->features |= DASD_FEATURE_READONLY;
+ }
+ rc = 0;
+ }
if (rc)
dev_warn(&device->cdev->dev, "DIAG ERP failed with "
"rc=%d\n", rc);
@@ -433,16 +441,20 @@
for (sb = 512; sb < bsize; sb = sb << 1)
block->s2b_shift++;
rc = mdsk_init_io(device, block->bp_block, 0, NULL);
- if (rc) {
+ if (rc && (rc != 4)) {
dev_warn(&device->cdev->dev, "DIAG initialization "
"failed with rc=%d\n", rc);
rc = -EIO;
} else {
+ if (rc == 4)
+ device->features |= DASD_FEATURE_READONLY;
dev_info(&device->cdev->dev,
- "New DASD with %ld byte/block, total size %ld KB\n",
+ "New DASD with %ld byte/block, total size %ld KB%s\n",
(unsigned long) block->bp_block,
(unsigned long) (block->blocks <<
- block->s2b_shift) >> 1);
+ block->s2b_shift) >> 1,
+ (rc == 4) ? ", read-only device" : "");
+ rc = 0;
}
out_label:
free_page((long) label);
diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c
index 417b97c..5819dc0 100644
--- a/drivers/s390/block/dasd_eckd.c
+++ b/drivers/s390/block/dasd_eckd.c
@@ -24,7 +24,6 @@
#include <asm/idals.h>
#include <asm/ebcdic.h>
#include <asm/io.h>
-#include <asm/todclk.h>
#include <asm/uaccess.h>
#include <asm/cio.h>
#include <asm/ccwdev.h>
@@ -78,6 +77,11 @@
static struct ccw_driver dasd_eckd_driver; /* see below */
+#define INIT_CQR_OK 0
+#define INIT_CQR_UNFORMATTED 1
+#define INIT_CQR_ERROR 2
+
+
/* initial attempt at a probe function. this can be simplified once
* the other detection code is gone */
static int
@@ -86,11 +90,12 @@
int ret;
/* set ECKD specific ccw-device options */
- ret = ccw_device_set_options(cdev, CCWDEV_ALLOW_FORCE);
+ ret = ccw_device_set_options(cdev, CCWDEV_ALLOW_FORCE |
+ CCWDEV_DO_PATHGROUP | CCWDEV_DO_MULTIPATH);
if (ret) {
- DBF_EVENT(DBF_WARNING,
- "dasd_eckd_probe: could not set ccw-device options "
- "for %s\n", dev_name(&cdev->dev));
+ DBF_EVENT_DEVID(DBF_WARNING, cdev, "%s",
+ "dasd_eckd_probe: could not set "
+ "ccw-device options");
return ret;
}
ret = dasd_generic_probe(cdev, &dasd_eckd_discipline);
@@ -749,8 +754,7 @@
cqr->block = NULL;
cqr->expires = 10*HZ;
cqr->lpm = lpm;
- clear_bit(DASD_CQR_FLAGS_USE_ERP, &cqr->flags);
- cqr->retries = 2;
+ cqr->retries = 256;
cqr->buildclk = get_clock();
cqr->status = DASD_CQR_FILLED;
return cqr;
@@ -885,16 +889,15 @@
rc = dasd_eckd_read_conf_lpm(device, &conf_data,
&conf_len, lpm);
if (rc && rc != -EOPNOTSUPP) { /* -EOPNOTSUPP is ok */
- DBF_EVENT(DBF_WARNING,
+ DBF_EVENT_DEVID(DBF_WARNING, device->cdev,
"Read configuration data returned "
- "error %d for device: %s", rc,
- dev_name(&device->cdev->dev));
+ "error %d", rc);
return rc;
}
if (conf_data == NULL) {
- DBF_EVENT(DBF_WARNING, "No configuration "
- "data retrieved for device: %s",
- dev_name(&device->cdev->dev));
+ DBF_EVENT_DEVID(DBF_WARNING, device->cdev, "%s",
+ "No configuration data "
+ "retrieved");
continue; /* no error */
}
/* save first valid configuration data */
@@ -941,16 +944,14 @@
sizeof(struct dasd_rssd_features)),
device);
if (IS_ERR(cqr)) {
- DBF_EVENT(DBF_WARNING, "Could not allocate initialization "
- "request for device: %s",
- dev_name(&device->cdev->dev));
+ DBF_EVENT_DEVID(DBF_WARNING, device->cdev, "%s", "Could not "
+ "allocate initialization request");
return PTR_ERR(cqr);
}
cqr->startdev = device;
cqr->memdev = device;
cqr->block = NULL;
- clear_bit(DASD_CQR_FLAGS_USE_ERP, &cqr->flags);
- cqr->retries = 5;
+ cqr->retries = 256;
cqr->expires = 10 * HZ;
/* Prepare for Read Subsystem Data */
@@ -1012,9 +1013,9 @@
}
psf_ssc_data = (struct dasd_psf_ssc_data *)cqr->data;
psf_ssc_data->order = PSF_ORDER_SSC;
- psf_ssc_data->suborder = 0x40;
+ psf_ssc_data->suborder = 0xc0;
if (enable_pav) {
- psf_ssc_data->suborder |= 0x88;
+ psf_ssc_data->suborder |= 0x08;
psf_ssc_data->reserved[0] = 0x88;
}
ccw = cqr->cpaddr;
@@ -1025,6 +1026,7 @@
cqr->startdev = device;
cqr->memdev = device;
cqr->block = NULL;
+ cqr->retries = 256;
cqr->expires = 10*HZ;
cqr->buildclk = get_clock();
cqr->status = DASD_CQR_FILLED;
@@ -1057,7 +1059,7 @@
/*
* Valide storage server of current device.
*/
-static int dasd_eckd_validate_server(struct dasd_device *device)
+static void dasd_eckd_validate_server(struct dasd_device *device)
{
int rc;
struct dasd_eckd_private *private;
@@ -1068,15 +1070,12 @@
else
enable_pav = 1;
rc = dasd_eckd_psf_ssc(device, enable_pav);
+
/* may be requested feature is not available on server,
* therefore just report error and go ahead */
private = (struct dasd_eckd_private *) device->private;
- DBF_EVENT(DBF_WARNING, "PSF-SSC on storage subsystem %s.%s.%04x "
- "returned rc=%d for device: %s",
- private->uid.vendor, private->uid.serial,
- private->uid.ssid, rc, dev_name(&device->cdev->dev));
- /* RE-Read Configuration Data */
- return dasd_eckd_read_conf(device);
+ DBF_EVENT_DEVID(DBF_WARNING, device->cdev, "PSF-SSC for SSID %04x "
+ "returned rc=%d", private->uid.ssid, rc);
}
/*
@@ -1090,6 +1089,15 @@
struct dasd_block *block;
int is_known, rc;
+ if (!ccw_device_is_pathgroup(device->cdev)) {
+ dev_warn(&device->cdev->dev,
+ "A channel path group could not be established\n");
+ return -EIO;
+ }
+ if (!ccw_device_is_multipath(device->cdev)) {
+ dev_info(&device->cdev->dev,
+ "The DASD is not operating in multipath mode\n");
+ }
private = (struct dasd_eckd_private *) device->private;
if (!private) {
private = kzalloc(sizeof(*private), GFP_KERNEL | GFP_DMA);
@@ -1123,9 +1131,9 @@
if (private->uid.type == UA_BASE_DEVICE) {
block = dasd_alloc_block();
if (IS_ERR(block)) {
- DBF_EVENT(DBF_WARNING, "could not allocate dasd "
- "block structure for device: %s",
- dev_name(&device->cdev->dev));
+ DBF_EVENT_DEVID(DBF_WARNING, device->cdev, "%s",
+ "could not allocate dasd "
+ "block structure");
rc = PTR_ERR(block);
goto out_err1;
}
@@ -1139,12 +1147,21 @@
rc = is_known;
goto out_err2;
}
+ /*
+ * dasd_eckd_vaildate_server is done on the first device that
+ * is found for an LCU. All later other devices have to wait
+ * for it, so they will read the correct feature codes.
+ */
if (!is_known) {
- /* new lcu found */
- rc = dasd_eckd_validate_server(device); /* will switch pav on */
- if (rc)
- goto out_err3;
- }
+ dasd_eckd_validate_server(device);
+ dasd_alias_lcu_setup_complete(device);
+ } else
+ dasd_alias_wait_for_lcu_setup(device);
+
+ /* device may report different configuration data after LCU setup */
+ rc = dasd_eckd_read_conf(device);
+ if (rc)
+ goto out_err3;
/* Read Feature Codes */
dasd_eckd_read_features(device);
@@ -1153,9 +1170,8 @@
rc = dasd_generic_read_dev_chars(device, DASD_ECKD_MAGIC,
&private->rdc_data, 64);
if (rc) {
- DBF_EVENT(DBF_WARNING,
- "Read device characteristics failed, rc=%d for "
- "device: %s", rc, dev_name(&device->cdev->dev));
+ DBF_EVENT_DEVID(DBF_WARNING, device->cdev,
+ "Read device characteristic failed, rc=%d", rc);
goto out_err3;
}
/* find the vaild cylinder size */
@@ -1256,12 +1272,29 @@
cqr->block = NULL;
cqr->startdev = device;
cqr->memdev = device;
- cqr->retries = 0;
+ cqr->retries = 255;
cqr->buildclk = get_clock();
cqr->status = DASD_CQR_FILLED;
return cqr;
}
+/* differentiate between 'no record found' and any other error */
+static int dasd_eckd_analysis_evaluation(struct dasd_ccw_req *init_cqr)
+{
+ char *sense;
+ if (init_cqr->status == DASD_CQR_DONE)
+ return INIT_CQR_OK;
+ else if (init_cqr->status == DASD_CQR_NEED_ERP ||
+ init_cqr->status == DASD_CQR_FAILED) {
+ sense = dasd_get_sense(&init_cqr->irb);
+ if (sense && (sense[1] & SNS1_NO_REC_FOUND))
+ return INIT_CQR_UNFORMATTED;
+ else
+ return INIT_CQR_ERROR;
+ } else
+ return INIT_CQR_ERROR;
+}
+
/*
* This is the callback function for the init_analysis cqr. It saves
* the status of the initial analysis ccw before it frees it and kicks
@@ -1269,21 +1302,20 @@
* dasd_eckd_do_analysis again (if the devices has not been marked
* for deletion in the meantime).
*/
-static void
-dasd_eckd_analysis_callback(struct dasd_ccw_req *init_cqr, void *data)
+static void dasd_eckd_analysis_callback(struct dasd_ccw_req *init_cqr,
+ void *data)
{
struct dasd_eckd_private *private;
struct dasd_device *device;
device = init_cqr->startdev;
private = (struct dasd_eckd_private *) device->private;
- private->init_cqr_status = init_cqr->status;
+ private->init_cqr_status = dasd_eckd_analysis_evaluation(init_cqr);
dasd_sfree_request(init_cqr, device);
dasd_kick_device(device);
}
-static int
-dasd_eckd_start_analysis(struct dasd_block *block)
+static int dasd_eckd_start_analysis(struct dasd_block *block)
{
struct dasd_eckd_private *private;
struct dasd_ccw_req *init_cqr;
@@ -1295,27 +1327,44 @@
init_cqr->callback = dasd_eckd_analysis_callback;
init_cqr->callback_data = NULL;
init_cqr->expires = 5*HZ;
+ /* first try without ERP, so we can later handle unformatted
+ * devices as special case
+ */
+ clear_bit(DASD_CQR_FLAGS_USE_ERP, &init_cqr->flags);
+ init_cqr->retries = 0;
dasd_add_request_head(init_cqr);
return -EAGAIN;
}
-static int
-dasd_eckd_end_analysis(struct dasd_block *block)
+static int dasd_eckd_end_analysis(struct dasd_block *block)
{
struct dasd_device *device;
struct dasd_eckd_private *private;
struct eckd_count *count_area;
unsigned int sb, blk_per_trk;
int status, i;
+ struct dasd_ccw_req *init_cqr;
device = block->base;
private = (struct dasd_eckd_private *) device->private;
status = private->init_cqr_status;
private->init_cqr_status = -1;
- if (status != DASD_CQR_DONE) {
- dev_warn(&device->cdev->dev,
- "The DASD is not formatted\n");
+ if (status == INIT_CQR_ERROR) {
+ /* try again, this time with full ERP */
+ init_cqr = dasd_eckd_analysis_ccw(device);
+ dasd_sleep_on(init_cqr);
+ status = dasd_eckd_analysis_evaluation(init_cqr);
+ dasd_sfree_request(init_cqr, device);
+ }
+
+ if (status == INIT_CQR_UNFORMATTED) {
+ dev_warn(&device->cdev->dev, "The DASD is not formatted\n");
return -EMEDIUMTYPE;
+ } else if (status == INIT_CQR_ERROR) {
+ dev_err(&device->cdev->dev,
+ "Detecting the DASD disk layout failed because "
+ "of an I/O error\n");
+ return -EIO;
}
private->uses_cdl = 1;
@@ -1607,8 +1656,7 @@
}
fcp->startdev = device;
fcp->memdev = device;
- clear_bit(DASD_CQR_FLAGS_USE_ERP, &fcp->flags);
- fcp->retries = 5; /* set retry counter to enable default ERP */
+ fcp->retries = 256;
fcp->buildclk = get_clock();
fcp->status = DASD_CQR_FILLED;
return fcp;
@@ -2690,6 +2738,7 @@
cqr->startdev = device;
cqr->memdev = device;
cqr->retries = 0;
+ clear_bit(DASD_CQR_FLAGS_USE_ERP, &cqr->flags);
cqr->expires = 10 * HZ;
/* Prepare for Read Subsystem Data */
@@ -3240,11 +3289,15 @@
if (is_known < 0)
return is_known;
if (!is_known) {
- /* new lcu found */
- rc = dasd_eckd_validate_server(device); /* will switch pav on */
- if (rc)
- goto out_err;
- }
+ dasd_eckd_validate_server(device);
+ dasd_alias_lcu_setup_complete(device);
+ } else
+ dasd_alias_wait_for_lcu_setup(device);
+
+ /* RE-Read Configuration Data */
+ rc = dasd_eckd_read_conf(device);
+ if (rc)
+ goto out_err;
/* Read Feature Codes */
dasd_eckd_read_features(device);
@@ -3253,9 +3306,8 @@
rc = dasd_generic_read_dev_chars(device, DASD_ECKD_MAGIC,
&temp_rdc_data, 64);
if (rc) {
- DBF_EVENT(DBF_WARNING,
- "Read device characteristics failed, rc=%d for "
- "device: %s", rc, dev_name(&device->cdev->dev));
+ DBF_EVENT_DEVID(DBF_WARNING, device->cdev,
+ "Read device characteristic failed, rc=%d", rc);
goto out_err;
}
spin_lock_irqsave(get_ccwdev_lock(device->cdev), flags);
diff --git a/drivers/s390/block/dasd_eckd.h b/drivers/s390/block/dasd_eckd.h
index ad45bca..864d53c 100644
--- a/drivers/s390/block/dasd_eckd.h
+++ b/drivers/s390/block/dasd_eckd.h
@@ -414,6 +414,7 @@
struct summary_unit_check_work_data suc_data;
struct read_uac_work_data ruac_data;
struct dasd_ccw_req *rsu_cqr;
+ struct completion lcu_setup;
};
struct alias_pav_group {
@@ -460,5 +461,6 @@
struct dasd_device *dasd_alias_get_start_dev(struct dasd_device *);
void dasd_alias_handle_summary_unit_check(struct dasd_device *, struct irb *);
void dasd_eckd_reset_ccw_to_base_io(struct dasd_ccw_req *);
-
+void dasd_alias_lcu_setup_complete(struct dasd_device *);
+void dasd_alias_wait_for_lcu_setup(struct dasd_device *);
#endif /* DASD_ECKD_H */
diff --git a/drivers/s390/block/dasd_eer.c b/drivers/s390/block/dasd_eer.c
index d96039e..1f3e967 100644
--- a/drivers/s390/block/dasd_eer.c
+++ b/drivers/s390/block/dasd_eer.c
@@ -536,7 +536,6 @@
eerb = kzalloc(sizeof(struct eerbuffer), GFP_KERNEL);
if (!eerb)
return -ENOMEM;
- lock_kernel();
eerb->buffer_page_count = eer_pages;
if (eerb->buffer_page_count < 1 ||
eerb->buffer_page_count > INT_MAX / PAGE_SIZE) {
@@ -544,7 +543,6 @@
DBF_EVENT(DBF_WARNING, "can't open device since module "
"parameter eer_pages is smaller than 1 or"
" bigger than %d", (int)(INT_MAX / PAGE_SIZE));
- unlock_kernel();
return -EINVAL;
}
eerb->buffersize = eerb->buffer_page_count * PAGE_SIZE;
@@ -552,14 +550,12 @@
GFP_KERNEL);
if (!eerb->buffer) {
kfree(eerb);
- unlock_kernel();
return -ENOMEM;
}
if (dasd_eer_allocate_buffer_pages(eerb->buffer,
eerb->buffer_page_count)) {
kfree(eerb->buffer);
kfree(eerb);
- unlock_kernel();
return -ENOMEM;
}
filp->private_data = eerb;
@@ -567,7 +563,6 @@
list_add(&eerb->list, &bufferlist);
spin_unlock_irqrestore(&bufferlock, flags);
- unlock_kernel();
return nonseekable_open(inp,filp);
}
diff --git a/drivers/s390/block/dasd_fba.c b/drivers/s390/block/dasd_fba.c
index f245377..0f15244 100644
--- a/drivers/s390/block/dasd_fba.c
+++ b/drivers/s390/block/dasd_fba.c
@@ -20,7 +20,6 @@
#include <asm/idals.h>
#include <asm/ebcdic.h>
#include <asm/io.h>
-#include <asm/todclk.h>
#include <asm/ccwdev.h>
#include "dasd_int.h"
@@ -141,9 +140,8 @@
}
block = dasd_alloc_block();
if (IS_ERR(block)) {
- DBF_EVENT(DBF_WARNING, "could not allocate dasd block "
- "structure for device: %s",
- dev_name(&device->cdev->dev));
+ DBF_EVENT_DEVID(DBF_WARNING, cdev, "%s", "could not allocate "
+ "dasd block structure");
device->private = NULL;
kfree(private);
return PTR_ERR(block);
@@ -155,9 +153,8 @@
rc = dasd_generic_read_dev_chars(device, DASD_FBA_MAGIC,
&private->rdc_data, 32);
if (rc) {
- DBF_EVENT(DBF_WARNING, "Read device characteristics returned "
- "error %d for device: %s",
- rc, dev_name(&device->cdev->dev));
+ DBF_EVENT_DEVID(DBF_WARNING, cdev, "Read device "
+ "characteristics returned error %d", rc);
device->block = NULL;
dasd_free_block(block);
device->private = NULL;
diff --git a/drivers/s390/block/dasd_int.h b/drivers/s390/block/dasd_int.h
index 8afd9fa..e4c2143 100644
--- a/drivers/s390/block/dasd_int.h
+++ b/drivers/s390/block/dasd_int.h
@@ -108,6 +108,16 @@
d_data); \
} while(0)
+#define DBF_EVENT_DEVID(d_level, d_cdev, d_str, d_data...) \
+do { \
+ struct ccw_dev_id __dev_id; \
+ ccw_device_get_id(d_cdev, &__dev_id); \
+ debug_sprintf_event(dasd_debug_area, \
+ d_level, \
+ "0.%x.%04x " d_str "\n", \
+ __dev_id.ssid, __dev_id.devno, d_data); \
+} while (0)
+
#define DBF_EXC(d_level, d_str, d_data...)\
do { \
debug_sprintf_exception(dasd_debug_area, \
@@ -595,6 +605,9 @@
int dasd_generic_read_dev_chars(struct dasd_device *, int, void *, int);
char *dasd_get_sense(struct irb *);
+void dasd_device_set_stop_bits(struct dasd_device *, int);
+void dasd_device_remove_stop_bits(struct dasd_device *, int);
+
/* externals in dasd_devmap.c */
extern int dasd_max_devindex;
extern int dasd_probeonly;
diff --git a/drivers/s390/block/dasd_ioctl.c b/drivers/s390/block/dasd_ioctl.c
index f756a1b..478bcdb 100644
--- a/drivers/s390/block/dasd_ioctl.c
+++ b/drivers/s390/block/dasd_ioctl.c
@@ -101,7 +101,7 @@
pr_info("%s: The DASD has been put in the quiesce "
"state\n", dev_name(&base->cdev->dev));
spin_lock_irqsave(get_ccwdev_lock(base->cdev), flags);
- base->stopped |= DASD_STOPPED_QUIESCE;
+ dasd_device_set_stop_bits(base, DASD_STOPPED_QUIESCE);
spin_unlock_irqrestore(get_ccwdev_lock(base->cdev), flags);
return 0;
}
@@ -122,7 +122,7 @@
pr_info("%s: I/O operations have been resumed "
"on the DASD\n", dev_name(&base->cdev->dev));
spin_lock_irqsave(get_ccwdev_lock(base->cdev), flags);
- base->stopped &= ~DASD_STOPPED_QUIESCE;
+ dasd_device_remove_stop_bits(base, DASD_STOPPED_QUIESCE);
spin_unlock_irqrestore(get_ccwdev_lock(base->cdev), flags);
dasd_schedule_block_bh(block);
diff --git a/drivers/s390/block/dasd_proc.c b/drivers/s390/block/dasd_proc.c
index 654daa3..5f23eca 100644
--- a/drivers/s390/block/dasd_proc.c
+++ b/drivers/s390/block/dasd_proc.c
@@ -215,7 +215,7 @@
}
prof = &dasd_global_profile;
- /* prevent couter 'overflow' on output */
+ /* prevent counter 'overflow' on output */
for (factor = 1; (prof->dasd_io_reqs / factor) > 9999999;
factor *= 10);
diff --git a/drivers/s390/char/con3215.c b/drivers/s390/char/con3215.c
index 21639d6..9d61683 100644
--- a/drivers/s390/char/con3215.c
+++ b/drivers/s390/char/con3215.c
@@ -857,7 +857,6 @@
/*
* 3215 console initialization code called from console_init().
- * NOTE: This is called before kmalloc is available.
*/
static int __init con3215_init(void)
{
diff --git a/drivers/s390/char/con3270.c b/drivers/s390/char/con3270.c
index bb838bd..6bca81a 100644
--- a/drivers/s390/char/con3270.c
+++ b/drivers/s390/char/con3270.c
@@ -572,7 +572,6 @@
/*
* 3270 console initialization code called from console_init().
- * NOTE: This is called before kmalloc is available.
*/
static int __init
con3270_init(void)
diff --git a/drivers/s390/char/fs3270.c b/drivers/s390/char/fs3270.c
index 097d384..28e4649 100644
--- a/drivers/s390/char/fs3270.c
+++ b/drivers/s390/char/fs3270.c
@@ -38,6 +38,8 @@
size_t rdbuf_size; /* size of data returned by RDBUF */
};
+static DEFINE_MUTEX(fs3270_mutex);
+
static void
fs3270_wake_up(struct raw3270_request *rq, void *data)
{
@@ -74,7 +76,7 @@
}
rc = raw3270_start(view, rq);
if (rc == 0) {
- /* Started sucessfully. Now wait for completion. */
+ /* Started successfully. Now wait for completion. */
wait_event(fp->wait, raw3270_request_final(rq));
}
} while (rc == -EACCES);
@@ -328,7 +330,7 @@
if (!fp)
return -ENODEV;
rc = 0;
- lock_kernel();
+ mutex_lock(&fs3270_mutex);
switch (cmd) {
case TUBICMD:
fp->read_command = arg;
@@ -354,7 +356,7 @@
rc = -EFAULT;
break;
}
- unlock_kernel();
+ mutex_unlock(&fs3270_mutex);
return rc;
}
@@ -437,7 +439,7 @@
minor = tty->index + RAW3270_FIRSTMINOR;
tty_kref_put(tty);
}
- lock_kernel();
+ mutex_lock(&fs3270_mutex);
/* Check if some other program is already using fullscreen mode. */
fp = (struct fs3270 *) raw3270_find_view(&fs3270_fn, minor);
if (!IS_ERR(fp)) {
@@ -478,7 +480,7 @@
}
filp->private_data = fp;
out:
- unlock_kernel();
+ mutex_unlock(&fs3270_mutex);
return rc;
}
diff --git a/drivers/s390/char/monreader.c b/drivers/s390/char/monreader.c
index 66e21dd..60473f8 100644
--- a/drivers/s390/char/monreader.c
+++ b/drivers/s390/char/monreader.c
@@ -12,7 +12,6 @@
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/init.h>
-#include <linux/smp_lock.h>
#include <linux/errno.h>
#include <linux/types.h>
#include <linux/kernel.h>
@@ -283,7 +282,6 @@
/*
* only one user allowed
*/
- lock_kernel();
rc = -EBUSY;
if (test_and_set_bit(MON_IN_USE, &mon_in_use))
goto out;
@@ -321,7 +319,6 @@
}
filp->private_data = monpriv;
dev_set_drvdata(monreader_device, monpriv);
- unlock_kernel();
return nonseekable_open(inode, filp);
out_path:
@@ -331,7 +328,6 @@
out_use:
clear_bit(MON_IN_USE, &mon_in_use);
out:
- unlock_kernel();
return rc;
}
@@ -607,6 +603,10 @@
}
dcss_mkname(mon_dcss_name, &user_data_connect[8]);
+ /*
+ * misc_register() has to be the last action in module_init(), because
+ * file operations will be available right after this.
+ */
rc = misc_register(&mon_dev);
if (rc < 0 )
goto out;
diff --git a/drivers/s390/char/monwriter.c b/drivers/s390/char/monwriter.c
index 66fb8eb..6532ed8 100644
--- a/drivers/s390/char/monwriter.c
+++ b/drivers/s390/char/monwriter.c
@@ -13,7 +13,6 @@
#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/errno.h>
-#include <linux/smp_lock.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/miscdevice.h>
@@ -185,13 +184,11 @@
monpriv = kzalloc(sizeof(struct mon_private), GFP_KERNEL);
if (!monpriv)
return -ENOMEM;
- lock_kernel();
INIT_LIST_HEAD(&monpriv->list);
monpriv->hdr_to_read = sizeof(monpriv->hdr);
mutex_init(&monpriv->thread_mutex);
filp->private_data = monpriv;
list_add_tail(&monpriv->priv_list, &mon_priv_list);
- unlock_kernel();
return nonseekable_open(inode, filp);
}
@@ -364,6 +361,10 @@
goto out_driver;
}
+ /*
+ * misc_register() has to be the last action in module_init(), because
+ * file operations will be available right after this.
+ */
rc = misc_register(&mon_dev);
if (rc)
goto out_device;
diff --git a/drivers/s390/char/sclp_cmd.c b/drivers/s390/char/sclp_cmd.c
index 5cc11c6..28b5afc 100644
--- a/drivers/s390/char/sclp_cmd.c
+++ b/drivers/s390/char/sclp_cmd.c
@@ -84,6 +84,7 @@
do {
memset(sccb, 0, sizeof(*sccb));
sccb->header.length = sizeof(*sccb);
+ sccb->header.function_code = 0x80;
sccb->header.control_mask[2] = 0x80;
rc = sclp_cmd_sync_early(commands[i], sccb);
} while (rc == -EBUSY);
diff --git a/drivers/s390/char/tape.h b/drivers/s390/char/tape.h
index a263337..7a242f0 100644
--- a/drivers/s390/char/tape.h
+++ b/drivers/s390/char/tape.h
@@ -212,6 +212,9 @@
struct tape_class_device * nt;
struct tape_class_device * rt;
+ /* Device mutex to serialize tape commands. */
+ struct mutex mutex;
+
/* Device discipline information. */
struct tape_discipline * discipline;
void * discdata;
@@ -292,9 +295,9 @@
extern int tape_generic_probe(struct ccw_device *);
extern void tape_generic_remove(struct ccw_device *);
-extern struct tape_device *tape_get_device(int devindex);
-extern struct tape_device *tape_get_device_reference(struct tape_device *);
-extern struct tape_device *tape_put_device(struct tape_device *);
+extern struct tape_device *tape_find_device(int devindex);
+extern struct tape_device *tape_get_device(struct tape_device *);
+extern void tape_put_device(struct tape_device *);
/* Externals from tape_char.c */
extern int tapechar_init(void);
diff --git a/drivers/s390/char/tape_34xx.c b/drivers/s390/char/tape_34xx.c
index 2fe45ff..3657fe1 100644
--- a/drivers/s390/char/tape_34xx.c
+++ b/drivers/s390/char/tape_34xx.c
@@ -113,16 +113,16 @@
{
struct tape_34xx_work *p =
container_of(work, struct tape_34xx_work, work);
+ struct tape_device *device = p->device;
switch(p->op) {
case TO_MSEN:
- tape_34xx_medium_sense(p->device);
+ tape_34xx_medium_sense(device);
break;
default:
DBF_EVENT(3, "T34XX: internal error: unknown work\n");
}
-
- p->device = tape_put_device(p->device);
+ tape_put_device(device);
kfree(p);
}
@@ -136,7 +136,7 @@
INIT_WORK(&p->work, tape_34xx_work_handler);
- p->device = tape_get_device_reference(device);
+ p->device = tape_get_device(device);
p->op = op;
schedule_work(&p->work);
diff --git a/drivers/s390/char/tape_3590.c b/drivers/s390/char/tape_3590.c
index e4cc3aa..0c72aad 100644
--- a/drivers/s390/char/tape_3590.c
+++ b/drivers/s390/char/tape_3590.c
@@ -608,7 +608,7 @@
INIT_WORK(&p->work, tape_3590_work_handler);
- p->device = tape_get_device_reference(device);
+ p->device = tape_get_device(device);
p->op = op;
schedule_work(&p->work);
diff --git a/drivers/s390/char/tape_block.c b/drivers/s390/char/tape_block.c
index 0c0705b..4799cc2 100644
--- a/drivers/s390/char/tape_block.c
+++ b/drivers/s390/char/tape_block.c
@@ -54,7 +54,7 @@
.owner = THIS_MODULE,
.open = tapeblock_open,
.release = tapeblock_release,
- .locked_ioctl = tapeblock_ioctl,
+ .ioctl = tapeblock_ioctl,
.media_changed = tapeblock_medium_changed,
.revalidate_disk = tapeblock_revalidate_disk,
};
@@ -239,7 +239,7 @@
disk->major = tapeblock_major;
disk->first_minor = device->first_minor;
disk->fops = &tapeblock_fops;
- disk->private_data = tape_get_device_reference(device);
+ disk->private_data = tape_get_device(device);
disk->queue = blkdat->request_queue;
set_capacity(disk, 0);
sprintf(disk->disk_name, "btibm%d",
@@ -247,11 +247,11 @@
blkdat->disk = disk;
blkdat->medium_changed = 1;
- blkdat->request_queue->queuedata = tape_get_device_reference(device);
+ blkdat->request_queue->queuedata = tape_get_device(device);
add_disk(disk);
- tape_get_device_reference(device);
+ tape_get_device(device);
INIT_WORK(&blkdat->requeue_task, tapeblock_requeue);
return 0;
@@ -274,13 +274,14 @@
}
del_gendisk(device->blk_data.disk);
- device->blk_data.disk->private_data =
- tape_put_device(device->blk_data.disk->private_data);
+ device->blk_data.disk->private_data = NULL;
+ tape_put_device(device);
put_disk(device->blk_data.disk);
device->blk_data.disk = NULL;
cleanup_queue:
- device->blk_data.request_queue->queuedata = tape_put_device(device);
+ device->blk_data.request_queue->queuedata = NULL;
+ tape_put_device(device);
blk_cleanup_queue(device->blk_data.request_queue);
device->blk_data.request_queue = NULL;
@@ -363,7 +364,7 @@
struct tape_device * device;
int rc;
- device = tape_get_device_reference(disk->private_data);
+ device = tape_get_device(disk->private_data);
if (device->required_tapemarks) {
DBF_EVENT(2, "TBLOCK: missing tapemarks\n");
diff --git a/drivers/s390/char/tape_char.c b/drivers/s390/char/tape_char.c
index 31566c5..23d773a 100644
--- a/drivers/s390/char/tape_char.c
+++ b/drivers/s390/char/tape_char.c
@@ -33,8 +33,7 @@
static ssize_t tapechar_write(struct file *, const char __user *, size_t, loff_t *);
static int tapechar_open(struct inode *,struct file *);
static int tapechar_release(struct inode *,struct file *);
-static int tapechar_ioctl(struct inode *, struct file *, unsigned int,
- unsigned long);
+static long tapechar_ioctl(struct file *, unsigned int, unsigned long);
static long tapechar_compat_ioctl(struct file *, unsigned int,
unsigned long);
@@ -43,7 +42,7 @@
.owner = THIS_MODULE,
.read = tapechar_read,
.write = tapechar_write,
- .ioctl = tapechar_ioctl,
+ .unlocked_ioctl = tapechar_ioctl,
.compat_ioctl = tapechar_compat_ioctl,
.open = tapechar_open,
.release = tapechar_release,
@@ -170,7 +169,6 @@
if (rc == 0) {
rc = block_size - request->rescnt;
DBF_EVENT(6, "TCHAR:rbytes: %x\n", rc);
- filp->f_pos += rc;
/* Copy data from idal buffer to user space. */
if (idal_buffer_to_user(device->char_data.idal_buf,
data, rc) != 0)
@@ -238,7 +236,6 @@
break;
DBF_EVENT(6, "TCHAR:wbytes: %lx\n",
block_size - request->rescnt);
- filp->f_pos += block_size - request->rescnt;
written += block_size - request->rescnt;
if (request->rescnt != 0)
break;
@@ -286,26 +283,20 @@
if (imajor(filp->f_path.dentry->d_inode) != tapechar_major)
return -ENODEV;
- lock_kernel();
minor = iminor(filp->f_path.dentry->d_inode);
- device = tape_get_device(minor / TAPE_MINORS_PER_DEV);
+ device = tape_find_device(minor / TAPE_MINORS_PER_DEV);
if (IS_ERR(device)) {
- DBF_EVENT(3, "TCHAR:open: tape_get_device() failed\n");
- rc = PTR_ERR(device);
- goto out;
+ DBF_EVENT(3, "TCHAR:open: tape_find_device() failed\n");
+ return PTR_ERR(device);
}
-
rc = tape_open(device);
if (rc == 0) {
filp->private_data = device;
- rc = nonseekable_open(inode, filp);
- }
- else
+ nonseekable_open(inode, filp);
+ } else
tape_put_device(device);
-out:
- unlock_kernel();
return rc;
}
@@ -342,7 +333,8 @@
device->char_data.idal_buf = NULL;
}
tape_release(device);
- filp->private_data = tape_put_device(device);
+ filp->private_data = NULL;
+ tape_put_device(device);
return 0;
}
@@ -351,16 +343,11 @@
* Tape device io controls.
*/
static int
-tapechar_ioctl(struct inode *inp, struct file *filp,
- unsigned int no, unsigned long data)
+__tapechar_ioctl(struct tape_device *device,
+ unsigned int no, unsigned long data)
{
- struct tape_device *device;
int rc;
- DBF_EVENT(6, "TCHAR:ioct\n");
-
- device = (struct tape_device *) filp->private_data;
-
if (no == MTIOCTOP) {
struct mtop op;
@@ -453,15 +440,30 @@
}
static long
+tapechar_ioctl(struct file *filp, unsigned int no, unsigned long data)
+{
+ struct tape_device *device;
+ long rc;
+
+ DBF_EVENT(6, "TCHAR:ioct\n");
+
+ device = (struct tape_device *) filp->private_data;
+ mutex_lock(&device->mutex);
+ rc = __tapechar_ioctl(device, no, data);
+ mutex_unlock(&device->mutex);
+ return rc;
+}
+
+static long
tapechar_compat_ioctl(struct file *filp, unsigned int no, unsigned long data)
{
struct tape_device *device = filp->private_data;
int rval = -ENOIOCTLCMD;
if (device->discipline->ioctl_fn) {
- lock_kernel();
+ mutex_lock(&device->mutex);
rval = device->discipline->ioctl_fn(device, no, data);
- unlock_kernel();
+ mutex_unlock(&device->mutex);
if (rval == -EINVAL)
rval = -ENOIOCTLCMD;
}
diff --git a/drivers/s390/char/tape_core.c b/drivers/s390/char/tape_core.c
index 5cd31e0..f5d6802 100644
--- a/drivers/s390/char/tape_core.c
+++ b/drivers/s390/char/tape_core.c
@@ -492,6 +492,7 @@
kfree(device);
return ERR_PTR(-ENOMEM);
}
+ mutex_init(&device->mutex);
INIT_LIST_HEAD(&device->req_queue);
INIT_LIST_HEAD(&device->node);
init_waitqueue_head(&device->state_change_wq);
@@ -511,11 +512,12 @@
* increment the reference count.
*/
struct tape_device *
-tape_get_device_reference(struct tape_device *device)
+tape_get_device(struct tape_device *device)
{
- DBF_EVENT(4, "tape_get_device_reference(%p) = %i\n", device,
- atomic_inc_return(&device->ref_count));
+ int count;
+ count = atomic_inc_return(&device->ref_count);
+ DBF_EVENT(4, "tape_get_device(%p) = %i\n", device, count);
return device;
}
@@ -525,32 +527,25 @@
* The function returns a NULL pointer to be used by the caller
* for clearing reference pointers.
*/
-struct tape_device *
+void
tape_put_device(struct tape_device *device)
{
- int remain;
+ int count;
- remain = atomic_dec_return(&device->ref_count);
- if (remain > 0) {
- DBF_EVENT(4, "tape_put_device(%p) -> %i\n", device, remain);
- } else {
- if (remain < 0) {
- DBF_EVENT(4, "put device without reference\n");
- } else {
- DBF_EVENT(4, "tape_free_device(%p)\n", device);
- kfree(device->modeset_byte);
- kfree(device);
- }
+ count = atomic_dec_return(&device->ref_count);
+ DBF_EVENT(4, "tape_put_device(%p) -> %i\n", device, count);
+ BUG_ON(count < 0);
+ if (count == 0) {
+ kfree(device->modeset_byte);
+ kfree(device);
}
-
- return NULL;
}
/*
* Find tape device by a device index.
*/
struct tape_device *
-tape_get_device(int devindex)
+tape_find_device(int devindex)
{
struct tape_device *device, *tmp;
@@ -558,7 +553,7 @@
read_lock(&tape_device_lock);
list_for_each_entry(tmp, &tape_device_list, node) {
if (tmp->first_minor / TAPE_MINORS_PER_DEV == devindex) {
- device = tape_get_device_reference(tmp);
+ device = tape_get_device(tmp);
break;
}
}
@@ -579,7 +574,8 @@
device = tape_alloc_device();
if (IS_ERR(device))
return -ENODEV;
- ccw_device_set_options(cdev, CCWDEV_DO_PATHGROUP);
+ ccw_device_set_options(cdev, CCWDEV_DO_PATHGROUP |
+ CCWDEV_DO_MULTIPATH);
ret = sysfs_create_group(&cdev->dev.kobj, &tape_attr_group);
if (ret) {
tape_put_device(device);
@@ -606,7 +602,8 @@
list_del(&request->list);
/* Decrease ref_count for removed request. */
- request->device = tape_put_device(device);
+ request->device = NULL;
+ tape_put_device(device);
request->rc = -EIO;
if (request->callback != NULL)
request->callback(request, request->callback_data);
@@ -664,9 +661,11 @@
tape_cleanup_device(device);
}
- if (!dev_get_drvdata(&cdev->dev)) {
+ device = dev_get_drvdata(&cdev->dev);
+ if (device) {
sysfs_remove_group(&cdev->dev.kobj, &tape_attr_group);
- dev_set_drvdata(&cdev->dev, tape_put_device(dev_get_drvdata(&cdev->dev)));
+ dev_set_drvdata(&cdev->dev, NULL);
+ tape_put_device(device);
}
}
@@ -721,9 +720,8 @@
{
DBF_LH(6, "Free request %p\n", request);
- if (request->device != NULL) {
- request->device = tape_put_device(request->device);
- }
+ if (request->device)
+ tape_put_device(request->device);
kfree(request->cpdata);
kfree(request->cpaddr);
kfree(request);
@@ -838,7 +836,8 @@
BUG_ON(request->status != TAPE_REQUEST_LONG_BUSY);
DBF_LH(6, "%08x: Long busy timeout.\n", device->cdev_id);
__tape_start_next_request(device);
- device->lb_timeout.data = (unsigned long) tape_put_device(device);
+ device->lb_timeout.data = 0UL;
+ tape_put_device(device);
spin_unlock_irq(get_ccwdev_lock(device->cdev));
}
@@ -918,7 +917,7 @@
}
/* Increase use count of device for the added request. */
- request->device = tape_get_device_reference(device);
+ request->device = tape_get_device(device);
if (list_empty(&device->req_queue)) {
/* No other requests are on the queue. Start this one. */
@@ -1117,8 +1116,8 @@
if (req->status == TAPE_REQUEST_LONG_BUSY) {
DBF_EVENT(3, "(%08x): del timer\n", device->cdev_id);
if (del_timer(&device->lb_timeout)) {
- device->lb_timeout.data = (unsigned long)
- tape_put_device(device);
+ device->lb_timeout.data = 0UL;
+ tape_put_device(device);
__tape_start_next_request(device);
}
return;
@@ -1173,7 +1172,7 @@
break;
case TAPE_IO_LONG_BUSY:
device->lb_timeout.data =
- (unsigned long)tape_get_device_reference(device);
+ (unsigned long) tape_get_device(device);
device->lb_timeout.expires = jiffies +
LONG_BUSY_TIMEOUT * HZ;
DBF_EVENT(3, "(%08x): add timer\n", device->cdev_id);
@@ -1326,7 +1325,7 @@
EXPORT_SYMBOL(tape_generic_offline);
EXPORT_SYMBOL(tape_generic_pm_suspend);
EXPORT_SYMBOL(tape_put_device);
-EXPORT_SYMBOL(tape_get_device_reference);
+EXPORT_SYMBOL(tape_get_device);
EXPORT_SYMBOL(tape_state_verbose);
EXPORT_SYMBOL(tape_op_verbose);
EXPORT_SYMBOL(tape_state_set);
diff --git a/drivers/s390/char/tape_proc.c b/drivers/s390/char/tape_proc.c
index 202f421..ebd820c 100644
--- a/drivers/s390/char/tape_proc.c
+++ b/drivers/s390/char/tape_proc.c
@@ -45,7 +45,7 @@
seq_printf(m, "TapeNo\tBusID CuType/Model\t"
"DevType/Model\tBlkSize\tState\tOp\tMedState\n");
}
- device = tape_get_device(n);
+ device = tape_find_device(n);
if (IS_ERR(device))
return 0;
spin_lock_irq(get_ccwdev_lock(device->cdev));
diff --git a/drivers/s390/char/tty3270.c b/drivers/s390/char/tty3270.c
index 3838567..911822db 100644
--- a/drivers/s390/char/tty3270.c
+++ b/drivers/s390/char/tty3270.c
@@ -19,6 +19,7 @@
#include <linux/slab.h>
#include <linux/bootmem.h>
+#include <linux/compat.h>
#include <asm/ccwdev.h>
#include <asm/cio.h>
@@ -1731,6 +1732,22 @@
return kbd_ioctl(tp->kbd, file, cmd, arg);
}
+#ifdef CONFIG_COMPAT
+static long
+tty3270_compat_ioctl(struct tty_struct *tty, struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ struct tty3270 *tp;
+
+ tp = tty->driver_data;
+ if (!tp)
+ return -ENODEV;
+ if (tty->flags & (1 << TTY_IO_ERROR))
+ return -EIO;
+ return kbd_ioctl(tp->kbd, file, cmd, (unsigned long)compat_ptr(arg));
+}
+#endif
+
static const struct tty_operations tty3270_ops = {
.open = tty3270_open,
.close = tty3270_close,
@@ -1745,6 +1762,9 @@
.hangup = tty3270_hangup,
.wait_until_sent = tty3270_wait_until_sent,
.ioctl = tty3270_ioctl,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = tty3270_compat_ioctl,
+#endif
.set_termios = tty3270_set_termios
};
diff --git a/drivers/s390/char/vmlogrdr.c b/drivers/s390/char/vmlogrdr.c
index d1a142fa..899aa79 100644
--- a/drivers/s390/char/vmlogrdr.c
+++ b/drivers/s390/char/vmlogrdr.c
@@ -312,11 +312,9 @@
return -ENOSYS;
/* Besure this device hasn't already been opened */
- lock_kernel();
spin_lock_bh(&logptr->priv_lock);
if (logptr->dev_in_use) {
spin_unlock_bh(&logptr->priv_lock);
- unlock_kernel();
return -EBUSY;
}
logptr->dev_in_use = 1;
@@ -360,9 +358,8 @@
|| (logptr->iucv_path_severed));
if (logptr->iucv_path_severed)
goto out_record;
- ret = nonseekable_open(inode, filp);
- unlock_kernel();
- return ret;
+ nonseekable_open(inode, filp);
+ return 0;
out_record:
if (logptr->autorecording)
@@ -372,7 +369,6 @@
logptr->path = NULL;
out_dev:
logptr->dev_in_use = 0;
- unlock_kernel();
return -EIO;
}
diff --git a/drivers/s390/char/vmur.c b/drivers/s390/char/vmur.c
index 77571b6..cc56fc7 100644
--- a/drivers/s390/char/vmur.c
+++ b/drivers/s390/char/vmur.c
@@ -695,7 +695,6 @@
if (accmode == O_RDWR)
return -EACCES;
- lock_kernel();
/*
* We treat the minor number as the devno of the ur device
* to find in the driver tree.
@@ -749,7 +748,6 @@
goto fail_urfile_free;
urf->file_reclen = rc;
file->private_data = urf;
- unlock_kernel();
return 0;
fail_urfile_free:
@@ -761,7 +759,6 @@
fail_put:
urdev_put(urd);
out:
- unlock_kernel();
return rc;
}
diff --git a/drivers/s390/char/vmwatchdog.c b/drivers/s390/char/vmwatchdog.c
index f2bc287..c974058 100644
--- a/drivers/s390/char/vmwatchdog.c
+++ b/drivers/s390/char/vmwatchdog.c
@@ -19,7 +19,6 @@
#include <linux/moduleparam.h>
#include <linux/suspend.h>
#include <linux/watchdog.h>
-#include <linux/smp_lock.h>
#include <asm/ebcdic.h>
#include <asm/io.h>
@@ -49,6 +48,8 @@
static unsigned long vmwdt_is_open;
static int vmwdt_expect_close;
+static DEFINE_MUTEX(vmwdt_mutex);
+
#define VMWDT_OPEN 0 /* devnode is open or suspend in progress */
#define VMWDT_RUNNING 1 /* The watchdog is armed */
@@ -133,15 +134,11 @@
static int vmwdt_open(struct inode *i, struct file *f)
{
int ret;
- lock_kernel();
- if (test_and_set_bit(VMWDT_OPEN, &vmwdt_is_open)) {
- unlock_kernel();
+ if (test_and_set_bit(VMWDT_OPEN, &vmwdt_is_open))
return -EBUSY;
- }
ret = vmwdt_keepalive();
if (ret)
clear_bit(VMWDT_OPEN, &vmwdt_is_open);
- unlock_kernel();
return ret ? ret : nonseekable_open(i, f);
}
@@ -160,8 +157,7 @@
.identity = "z/VM Watchdog Timer",
};
-static int vmwdt_ioctl(struct inode *i, struct file *f,
- unsigned int cmd, unsigned long arg)
+static int __vmwdt_ioctl(unsigned int cmd, unsigned long arg)
{
switch (cmd) {
case WDIOC_GETSUPPORT:
@@ -205,10 +201,19 @@
case WDIOC_KEEPALIVE:
return vmwdt_keepalive();
}
-
return -EINVAL;
}
+static long vmwdt_ioctl(struct file *f, unsigned int cmd, unsigned long arg)
+{
+ int rc;
+
+ mutex_lock(&vmwdt_mutex);
+ rc = __vmwdt_ioctl(cmd, arg);
+ mutex_unlock(&vmwdt_mutex);
+ return (long) rc;
+}
+
static ssize_t vmwdt_write(struct file *f, const char __user *buf,
size_t count, loff_t *ppos)
{
@@ -288,7 +293,7 @@
static const struct file_operations vmwdt_fops = {
.open = &vmwdt_open,
.release = &vmwdt_close,
- .ioctl = &vmwdt_ioctl,
+ .unlocked_ioctl = &vmwdt_ioctl,
.write = &vmwdt_write,
.owner = THIS_MODULE,
};
@@ -309,6 +314,10 @@
ret = register_pm_notifier(&vmwdt_power_notifier);
if (ret)
return ret;
+ /*
+ * misc_register() has to be the last action in module_init(), because
+ * file operations will be available right after this.
+ */
ret = misc_register(&vmwdt_dev);
if (ret) {
unregister_pm_notifier(&vmwdt_power_notifier);
diff --git a/drivers/s390/cio/Makefile b/drivers/s390/cio/Makefile
index fa4c966..d033414 100644
--- a/drivers/s390/cio/Makefile
+++ b/drivers/s390/cio/Makefile
@@ -3,7 +3,7 @@
#
obj-y += airq.o blacklist.o chsc.o cio.o css.o chp.o idset.o isc.o \
- fcx.o itcw.o crw.o
+ fcx.o itcw.o crw.o ccwreq.o
ccw_device-objs += device.o device_fsm.o device_ops.o
ccw_device-objs += device_id.o device_pgid.o device_status.o
obj-y += ccw_device.o cmf.o
diff --git a/drivers/s390/cio/ccwreq.c b/drivers/s390/cio/ccwreq.c
new file mode 100644
index 0000000..9509e38
--- /dev/null
+++ b/drivers/s390/cio/ccwreq.c
@@ -0,0 +1,328 @@
+/*
+ * Handling of internal CCW device requests.
+ *
+ * Copyright IBM Corp. 2009
+ * Author(s): Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
+ */
+
+#include <linux/types.h>
+#include <linux/err.h>
+#include <asm/ccwdev.h>
+#include <asm/cio.h>
+
+#include "io_sch.h"
+#include "cio.h"
+#include "device.h"
+#include "cio_debug.h"
+
+/**
+ * lpm_adjust - adjust path mask
+ * @lpm: path mask to adjust
+ * @mask: mask of available paths
+ *
+ * Shift @lpm right until @lpm and @mask have at least one bit in common or
+ * until @lpm is zero. Return the resulting lpm.
+ */
+int lpm_adjust(int lpm, int mask)
+{
+ while (lpm && ((lpm & mask) == 0))
+ lpm >>= 1;
+ return lpm;
+}
+
+/*
+ * Adjust path mask to use next path and reset retry count. Return resulting
+ * path mask.
+ */
+static u16 ccwreq_next_path(struct ccw_device *cdev)
+{
+ struct ccw_request *req = &cdev->private->req;
+
+ req->retries = req->maxretries;
+ req->mask = lpm_adjust(req->mask >>= 1, req->lpm);
+
+ return req->mask;
+}
+
+/*
+ * Clean up device state and report to callback.
+ */
+static void ccwreq_stop(struct ccw_device *cdev, int rc)
+{
+ struct subchannel *sch = to_subchannel(cdev->dev.parent);
+ struct ccw_request *req = &cdev->private->req;
+
+ if (req->done)
+ return;
+ req->done = 1;
+ ccw_device_set_timeout(cdev, 0);
+ memset(&cdev->private->irb, 0, sizeof(struct irb));
+ sch->lpm = sch->schib.pmcw.pam;
+ if (rc && rc != -ENODEV && req->drc)
+ rc = req->drc;
+ req->callback(cdev, req->data, rc);
+}
+
+/*
+ * (Re-)Start the operation until retries and paths are exhausted.
+ */
+static void ccwreq_do(struct ccw_device *cdev)
+{
+ struct ccw_request *req = &cdev->private->req;
+ struct subchannel *sch = to_subchannel(cdev->dev.parent);
+ struct ccw1 *cp = req->cp;
+ int rc = -EACCES;
+
+ while (req->mask) {
+ if (req->retries-- == 0) {
+ /* Retries exhausted, try next path. */
+ ccwreq_next_path(cdev);
+ continue;
+ }
+ /* Perform start function. */
+ sch->lpm = 0xff;
+ memset(&cdev->private->irb, 0, sizeof(struct irb));
+ rc = cio_start(sch, cp, (u8) req->mask);
+ if (rc == 0) {
+ /* I/O started successfully. */
+ ccw_device_set_timeout(cdev, req->timeout);
+ return;
+ }
+ if (rc == -ENODEV) {
+ /* Permanent device error. */
+ break;
+ }
+ if (rc == -EACCES) {
+ /* Permant path error. */
+ ccwreq_next_path(cdev);
+ continue;
+ }
+ /* Temporary improper status. */
+ rc = cio_clear(sch);
+ if (rc)
+ break;
+ return;
+ }
+ ccwreq_stop(cdev, rc);
+}
+
+/**
+ * ccw_request_start - perform I/O request
+ * @cdev: ccw device
+ *
+ * Perform the I/O request specified by cdev->req.
+ */
+void ccw_request_start(struct ccw_device *cdev)
+{
+ struct ccw_request *req = &cdev->private->req;
+
+ /* Try all paths twice to counter link flapping. */
+ req->mask = 0x8080;
+ req->retries = req->maxretries;
+ req->mask = lpm_adjust(req->mask, req->lpm);
+ req->drc = 0;
+ req->done = 0;
+ req->cancel = 0;
+ if (!req->mask)
+ goto out_nopath;
+ ccwreq_do(cdev);
+ return;
+
+out_nopath:
+ ccwreq_stop(cdev, -EACCES);
+}
+
+/**
+ * ccw_request_cancel - cancel running I/O request
+ * @cdev: ccw device
+ *
+ * Cancel the I/O request specified by cdev->req. Return non-zero if request
+ * has already finished, zero otherwise.
+ */
+int ccw_request_cancel(struct ccw_device *cdev)
+{
+ struct subchannel *sch = to_subchannel(cdev->dev.parent);
+ struct ccw_request *req = &cdev->private->req;
+ int rc;
+
+ if (req->done)
+ return 1;
+ req->cancel = 1;
+ rc = cio_clear(sch);
+ if (rc)
+ ccwreq_stop(cdev, rc);
+ return 0;
+}
+
+/*
+ * Return the status of the internal I/O started on the specified ccw device.
+ * Perform BASIC SENSE if required.
+ */
+static enum io_status ccwreq_status(struct ccw_device *cdev, struct irb *lcirb)
+{
+ struct irb *irb = &cdev->private->irb;
+ struct cmd_scsw *scsw = &irb->scsw.cmd;
+
+ /* Perform BASIC SENSE if needed. */
+ if (ccw_device_accumulate_and_sense(cdev, lcirb))
+ return IO_RUNNING;
+ /* Check for halt/clear interrupt. */
+ if (scsw->fctl & (SCSW_FCTL_HALT_FUNC | SCSW_FCTL_CLEAR_FUNC))
+ return IO_KILLED;
+ /* Check for path error. */
+ if (scsw->cc == 3 || scsw->pno)
+ return IO_PATH_ERROR;
+ /* Handle BASIC SENSE data. */
+ if (irb->esw.esw0.erw.cons) {
+ CIO_TRACE_EVENT(2, "sensedata");
+ CIO_HEX_EVENT(2, &cdev->private->dev_id,
+ sizeof(struct ccw_dev_id));
+ CIO_HEX_EVENT(2, &cdev->private->irb.ecw, SENSE_MAX_COUNT);
+ /* Check for command reject. */
+ if (irb->ecw[0] & SNS0_CMD_REJECT)
+ return IO_REJECTED;
+ /* Assume that unexpected SENSE data implies an error. */
+ return IO_STATUS_ERROR;
+ }
+ /* Check for channel errors. */
+ if (scsw->cstat != 0)
+ return IO_STATUS_ERROR;
+ /* Check for device errors. */
+ if (scsw->dstat & ~(DEV_STAT_CHN_END | DEV_STAT_DEV_END))
+ return IO_STATUS_ERROR;
+ /* Check for final state. */
+ if (!(scsw->dstat & DEV_STAT_DEV_END))
+ return IO_RUNNING;
+ /* Check for other improper status. */
+ if (scsw->cc == 1 && (scsw->stctl & SCSW_STCTL_ALERT_STATUS))
+ return IO_STATUS_ERROR;
+ return IO_DONE;
+}
+
+/*
+ * Log ccw request status.
+ */
+static void ccwreq_log_status(struct ccw_device *cdev, enum io_status status)
+{
+ struct ccw_request *req = &cdev->private->req;
+ struct {
+ struct ccw_dev_id dev_id;
+ u16 retries;
+ u8 lpm;
+ u8 status;
+ } __attribute__ ((packed)) data;
+ data.dev_id = cdev->private->dev_id;
+ data.retries = req->retries;
+ data.lpm = (u8) req->mask;
+ data.status = (u8) status;
+ CIO_TRACE_EVENT(2, "reqstat");
+ CIO_HEX_EVENT(2, &data, sizeof(data));
+}
+
+/**
+ * ccw_request_handler - interrupt handler for I/O request procedure.
+ * @cdev: ccw device
+ *
+ * Handle interrupt during I/O request procedure.
+ */
+void ccw_request_handler(struct ccw_device *cdev)
+{
+ struct ccw_request *req = &cdev->private->req;
+ struct irb *irb = (struct irb *) __LC_IRB;
+ enum io_status status;
+ int rc = -EOPNOTSUPP;
+
+ /* Check status of I/O request. */
+ status = ccwreq_status(cdev, irb);
+ if (req->filter)
+ status = req->filter(cdev, req->data, irb, status);
+ if (status != IO_RUNNING)
+ ccw_device_set_timeout(cdev, 0);
+ if (status != IO_DONE && status != IO_RUNNING)
+ ccwreq_log_status(cdev, status);
+ switch (status) {
+ case IO_DONE:
+ break;
+ case IO_RUNNING:
+ return;
+ case IO_REJECTED:
+ goto err;
+ case IO_PATH_ERROR:
+ goto out_next_path;
+ case IO_STATUS_ERROR:
+ goto out_restart;
+ case IO_KILLED:
+ /* Check if request was cancelled on purpose. */
+ if (req->cancel) {
+ rc = -EIO;
+ goto err;
+ }
+ goto out_restart;
+ }
+ /* Check back with request initiator. */
+ if (!req->check)
+ goto out;
+ switch (req->check(cdev, req->data)) {
+ case 0:
+ break;
+ case -EAGAIN:
+ goto out_restart;
+ case -EACCES:
+ goto out_next_path;
+ default:
+ goto err;
+ }
+out:
+ ccwreq_stop(cdev, 0);
+ return;
+
+out_next_path:
+ /* Try next path and restart I/O. */
+ if (!ccwreq_next_path(cdev)) {
+ rc = -EACCES;
+ goto err;
+ }
+out_restart:
+ /* Restart. */
+ ccwreq_do(cdev);
+ return;
+err:
+ ccwreq_stop(cdev, rc);
+}
+
+
+/**
+ * ccw_request_timeout - timeout handler for I/O request procedure
+ * @cdev: ccw device
+ *
+ * Handle timeout during I/O request procedure.
+ */
+void ccw_request_timeout(struct ccw_device *cdev)
+{
+ struct subchannel *sch = to_subchannel(cdev->dev.parent);
+ struct ccw_request *req = &cdev->private->req;
+ int rc;
+
+ if (!ccwreq_next_path(cdev)) {
+ /* set the final return code for this request */
+ req->drc = -ETIME;
+ }
+ rc = cio_clear(sch);
+ if (rc)
+ goto err;
+ return;
+
+err:
+ ccwreq_stop(cdev, rc);
+}
+
+/**
+ * ccw_request_notoper - notoper handler for I/O request procedure
+ * @cdev: ccw device
+ *
+ * Handle timeout during I/O request procedure.
+ */
+void ccw_request_notoper(struct ccw_device *cdev)
+{
+ ccwreq_stop(cdev, -ENODEV);
+}
diff --git a/drivers/s390/cio/chp.c b/drivers/s390/cio/chp.c
index 8ab5160..c268a2e 100644
--- a/drivers/s390/cio/chp.c
+++ b/drivers/s390/cio/chp.c
@@ -65,7 +65,7 @@
chpid_to_chp(chpid)->state = onoff;
}
-/* On succes return 0 if channel-path is varied offline, 1 if it is varied
+/* On success return 0 if channel-path is varied offline, 1 if it is varied
* online. Return -ENODEV if channel-path is not registered. */
int chp_get_status(struct chp_id chpid)
{
diff --git a/drivers/s390/cio/cio.h b/drivers/s390/cio/cio.h
index 2e43558..bf7f80f 100644
--- a/drivers/s390/cio/cio.h
+++ b/drivers/s390/cio/cio.h
@@ -68,6 +68,11 @@
__u8 mda[4]; /* model dependent area */
} __attribute__ ((packed,aligned(4)));
+enum sch_todo {
+ SCH_TODO_NOTHING,
+ SCH_TODO_UNREG,
+};
+
/* subchannel data structure used by I/O subroutines */
struct subchannel {
struct subchannel_id schid;
@@ -95,7 +100,8 @@
struct device dev; /* entry in device tree */
struct css_driver *driver;
void *private; /* private per subchannel type data */
- struct work_struct work;
+ enum sch_todo todo;
+ struct work_struct todo_work;
struct schib_config config;
} __attribute__ ((aligned(8)));
diff --git a/drivers/s390/cio/cmf.c b/drivers/s390/cio/cmf.c
index 30f5161..2985eb4 100644
--- a/drivers/s390/cio/cmf.c
+++ b/drivers/s390/cio/cmf.c
@@ -462,7 +462,7 @@
* block of memory, which can not be moved as long as any channel
* is active. Therefore, a maximum number of subchannels needs to
* be defined somewhere. This is a module parameter, defaulting to
- * a resonable value of 1024, or 32 kb of memory.
+ * a reasonable value of 1024, or 32 kb of memory.
* Current kernels don't allow kmalloc with more than 128kb, so the
* maximum is 4096.
*/
diff --git a/drivers/s390/cio/css.c b/drivers/s390/cio/css.c
index 91c2570..92ff88a 100644
--- a/drivers/s390/cio/css.c
+++ b/drivers/s390/cio/css.c
@@ -133,6 +133,8 @@
return rc;
}
+static void css_sch_todo(struct work_struct *work);
+
static struct subchannel *
css_alloc_subchannel(struct subchannel_id schid)
{
@@ -147,6 +149,7 @@
kfree(sch);
return ERR_PTR(ret);
}
+ INIT_WORK(&sch->todo_work, css_sch_todo);
return sch;
}
@@ -190,6 +193,51 @@
}
EXPORT_SYMBOL_GPL(css_sch_device_unregister);
+static void css_sch_todo(struct work_struct *work)
+{
+ struct subchannel *sch;
+ enum sch_todo todo;
+
+ sch = container_of(work, struct subchannel, todo_work);
+ /* Find out todo. */
+ spin_lock_irq(sch->lock);
+ todo = sch->todo;
+ CIO_MSG_EVENT(4, "sch_todo: sch=0.%x.%04x, todo=%d\n", sch->schid.ssid,
+ sch->schid.sch_no, todo);
+ sch->todo = SCH_TODO_NOTHING;
+ spin_unlock_irq(sch->lock);
+ /* Perform todo. */
+ if (todo == SCH_TODO_UNREG)
+ css_sch_device_unregister(sch);
+ /* Release workqueue ref. */
+ put_device(&sch->dev);
+}
+
+/**
+ * css_sched_sch_todo - schedule a subchannel operation
+ * @sch: subchannel
+ * @todo: todo
+ *
+ * Schedule the operation identified by @todo to be performed on the slow path
+ * workqueue. Do nothing if another operation with higher priority is already
+ * scheduled. Needs to be called with subchannel lock held.
+ */
+void css_sched_sch_todo(struct subchannel *sch, enum sch_todo todo)
+{
+ CIO_MSG_EVENT(4, "sch_todo: sched sch=0.%x.%04x todo=%d\n",
+ sch->schid.ssid, sch->schid.sch_no, todo);
+ if (sch->todo >= todo)
+ return;
+ /* Get workqueue ref. */
+ if (!get_device(&sch->dev))
+ return;
+ sch->todo = todo;
+ if (!queue_work(slow_path_wq, &sch->todo_work)) {
+ /* Already queued, release workqueue ref. */
+ put_device(&sch->dev);
+ }
+}
+
static void ssd_from_pmcw(struct chsc_ssd_info *ssd, struct pmcw *pmcw)
{
int i;
@@ -376,8 +424,8 @@
/* Unusable - ignore. */
return 0;
}
- CIO_MSG_EVENT(4, "Evaluating schid 0.%x.%04x, event %d, unknown, "
- "slow path.\n", schid.ssid, schid.sch_no, CIO_OPER);
+ CIO_MSG_EVENT(4, "event: sch 0.%x.%04x, new\n", schid.ssid,
+ schid.sch_no);
return css_probe_device(schid);
}
@@ -394,6 +442,10 @@
"Got subchannel machine check but "
"no sch_event handler provided.\n");
}
+ if (ret != 0 && ret != -EAGAIN) {
+ CIO_MSG_EVENT(2, "eval: sch 0.%x.%04x, rc=%d\n",
+ sch->schid.ssid, sch->schid.sch_no, ret);
+ }
return ret;
}
@@ -684,6 +736,7 @@
css->pseudo_subchannel->dev.parent = &css->device;
css->pseudo_subchannel->dev.release = css_subchannel_release;
dev_set_name(&css->pseudo_subchannel->dev, "defunct");
+ mutex_init(&css->pseudo_subchannel->reg_mutex);
ret = cio_create_sch_lock(css->pseudo_subchannel);
if (ret) {
kfree(css->pseudo_subchannel);
diff --git a/drivers/s390/cio/css.h b/drivers/s390/cio/css.h
index 68d6b0b..fe84b92 100644
--- a/drivers/s390/cio/css.h
+++ b/drivers/s390/cio/css.h
@@ -11,6 +11,8 @@
#include <asm/chpid.h>
#include <asm/schid.h>
+#include "cio.h"
+
/*
* path grouping stuff
*/
@@ -151,4 +153,5 @@
extern struct workqueue_struct *slow_path_wq;
void css_wait_for_slow_path(void);
+void css_sched_sch_todo(struct subchannel *sch, enum sch_todo todo);
#endif
diff --git a/drivers/s390/cio/device.c b/drivers/s390/cio/device.c
index 2490b74..9fecfb4 100644
--- a/drivers/s390/cio/device.c
+++ b/drivers/s390/cio/device.c
@@ -7,6 +7,10 @@
* Cornelia Huck (cornelia.huck@de.ibm.com)
* Martin Schwidefsky (schwidefsky@de.ibm.com)
*/
+
+#define KMSG_COMPONENT "cio"
+#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
+
#include <linux/module.h>
#include <linux/init.h>
#include <linux/spinlock.h>
@@ -299,53 +303,18 @@
static void ccw_device_unregister(struct ccw_device *cdev)
{
- if (test_and_clear_bit(1, &cdev->private->registered)) {
+ if (device_is_registered(&cdev->dev)) {
+ /* Undo device_add(). */
device_del(&cdev->dev);
+ }
+ if (cdev->private->flags.initialized) {
+ cdev->private->flags.initialized = 0;
/* Release reference from device_initialize(). */
put_device(&cdev->dev);
}
}
-static void ccw_device_remove_orphan_cb(struct work_struct *work)
-{
- struct ccw_device_private *priv;
- struct ccw_device *cdev;
-
- priv = container_of(work, struct ccw_device_private, kick_work);
- cdev = priv->cdev;
- ccw_device_unregister(cdev);
- /* Release cdev reference for workqueue processing. */
- put_device(&cdev->dev);
-}
-
-static void
-ccw_device_remove_disconnected(struct ccw_device *cdev)
-{
- unsigned long flags;
-
- /*
- * Forced offline in disconnected state means
- * 'throw away device'.
- */
- if (ccw_device_is_orphan(cdev)) {
- /*
- * Deregister ccw device.
- * Unfortunately, we cannot do this directly from the
- * attribute method.
- */
- /* Get cdev reference for workqueue processing. */
- if (!get_device(&cdev->dev))
- return;
- spin_lock_irqsave(cdev->ccwlock, flags);
- cdev->private->state = DEV_STATE_NOT_OPER;
- spin_unlock_irqrestore(cdev->ccwlock, flags);
- PREPARE_WORK(&cdev->private->kick_work,
- ccw_device_remove_orphan_cb);
- queue_work(slow_path_wq, &cdev->private->kick_work);
- } else
- /* Deregister subchannel, which will kill the ccw device. */
- ccw_device_schedule_sch_unregister(cdev);
-}
+static void io_subchannel_quiesce(struct subchannel *);
/**
* ccw_device_set_offline() - disable a ccw device for I/O
@@ -360,7 +329,8 @@
*/
int ccw_device_set_offline(struct ccw_device *cdev)
{
- int ret;
+ struct subchannel *sch;
+ int ret, state;
if (!cdev)
return -ENODEV;
@@ -374,6 +344,7 @@
}
cdev->online = 0;
spin_lock_irq(cdev->ccwlock);
+ sch = to_subchannel(cdev->dev.parent);
/* Wait until a final state or DISCONNECTED is reached */
while (!dev_fsm_final_state(cdev) &&
cdev->private->state != DEV_STATE_DISCONNECTED) {
@@ -382,20 +353,37 @@
cdev->private->state == DEV_STATE_DISCONNECTED));
spin_lock_irq(cdev->ccwlock);
}
- ret = ccw_device_offline(cdev);
- if (ret)
- goto error;
+ do {
+ ret = ccw_device_offline(cdev);
+ if (!ret)
+ break;
+ CIO_MSG_EVENT(0, "ccw_device_offline returned %d, device "
+ "0.%x.%04x\n", ret, cdev->private->dev_id.ssid,
+ cdev->private->dev_id.devno);
+ if (ret != -EBUSY)
+ goto error;
+ state = cdev->private->state;
+ spin_unlock_irq(cdev->ccwlock);
+ io_subchannel_quiesce(sch);
+ spin_lock_irq(cdev->ccwlock);
+ cdev->private->state = state;
+ } while (ret == -EBUSY);
spin_unlock_irq(cdev->ccwlock);
wait_event(cdev->private->wait_q, (dev_fsm_final_state(cdev) ||
cdev->private->state == DEV_STATE_DISCONNECTED));
+ /* Inform the user if set offline failed. */
+ if (cdev->private->state == DEV_STATE_BOXED) {
+ pr_warning("%s: The device entered boxed state while "
+ "being set offline\n", dev_name(&cdev->dev));
+ } else if (cdev->private->state == DEV_STATE_NOT_OPER) {
+ pr_warning("%s: The device stopped operating while "
+ "being set offline\n", dev_name(&cdev->dev));
+ }
/* Give up reference from ccw_device_set_online(). */
put_device(&cdev->dev);
return 0;
error:
- CIO_MSG_EVENT(0, "ccw_device_offline returned %d, device 0.%x.%04x\n",
- ret, cdev->private->dev_id.ssid,
- cdev->private->dev_id.devno);
cdev->private->state = DEV_STATE_OFFLINE;
dev_fsm_event(cdev, DEV_EVENT_NOTOPER);
spin_unlock_irq(cdev->ccwlock);
@@ -448,6 +436,16 @@
if ((cdev->private->state != DEV_STATE_ONLINE) &&
(cdev->private->state != DEV_STATE_W4SENSE)) {
spin_unlock_irq(cdev->ccwlock);
+ /* Inform the user that set online failed. */
+ if (cdev->private->state == DEV_STATE_BOXED) {
+ pr_warning("%s: Setting the device online failed "
+ "because it is boxed\n",
+ dev_name(&cdev->dev));
+ } else if (cdev->private->state == DEV_STATE_NOT_OPER) {
+ pr_warning("%s: Setting the device online failed "
+ "because it is not operational\n",
+ dev_name(&cdev->dev));
+ }
/* Give up online reference since onlining failed. */
put_device(&cdev->dev);
return -ENODEV;
@@ -494,27 +492,22 @@
static int online_store_handle_offline(struct ccw_device *cdev)
{
- if (cdev->private->state == DEV_STATE_DISCONNECTED)
- ccw_device_remove_disconnected(cdev);
- else if (cdev->online && cdev->drv && cdev->drv->set_offline)
+ if (cdev->private->state == DEV_STATE_DISCONNECTED) {
+ spin_lock_irq(cdev->ccwlock);
+ ccw_device_sched_todo(cdev, CDEV_TODO_UNREG_EVAL);
+ spin_unlock_irq(cdev->ccwlock);
+ } else if (cdev->online && cdev->drv && cdev->drv->set_offline)
return ccw_device_set_offline(cdev);
return 0;
}
static int online_store_recog_and_online(struct ccw_device *cdev)
{
- int ret;
-
/* Do device recognition, if needed. */
if (cdev->private->state == DEV_STATE_BOXED) {
- ret = ccw_device_recognition(cdev);
- if (ret) {
- CIO_MSG_EVENT(0, "Couldn't start recognition "
- "for device 0.%x.%04x (ret=%d)\n",
- cdev->private->dev_id.ssid,
- cdev->private->dev_id.devno, ret);
- return ret;
- }
+ spin_lock_irq(cdev->ccwlock);
+ ccw_device_recognition(cdev);
+ spin_unlock_irq(cdev->ccwlock);
wait_event(cdev->private->wait_q,
cdev->private->flags.recog_done);
if (cdev->private->state != DEV_STATE_OFFLINE)
@@ -553,11 +546,10 @@
int force, ret;
unsigned long i;
- if ((cdev->private->state != DEV_STATE_OFFLINE &&
- cdev->private->state != DEV_STATE_ONLINE &&
- cdev->private->state != DEV_STATE_BOXED &&
- cdev->private->state != DEV_STATE_DISCONNECTED) ||
- atomic_cmpxchg(&cdev->private->onoff, 0, 1) != 0)
+ if (!dev_fsm_final_state(cdev) &&
+ cdev->private->state != DEV_STATE_DISCONNECTED)
+ return -EAGAIN;
+ if (atomic_cmpxchg(&cdev->private->onoff, 0, 1) != 0)
return -EAGAIN;
if (cdev->drv && !try_module_get(cdev->drv->owner)) {
@@ -665,81 +657,31 @@
cdev->private->dev_id.devno);
if (ret)
return ret;
- ret = device_add(dev);
- if (ret)
- return ret;
-
- set_bit(1, &cdev->private->registered);
- return ret;
+ return device_add(dev);
}
-struct match_data {
- struct ccw_dev_id dev_id;
- struct ccw_device * sibling;
-};
-
-static int
-match_devno(struct device * dev, void * data)
+static int match_dev_id(struct device *dev, void *data)
{
- struct match_data * d = data;
- struct ccw_device * cdev;
+ struct ccw_device *cdev = to_ccwdev(dev);
+ struct ccw_dev_id *dev_id = data;
- cdev = to_ccwdev(dev);
- if ((cdev->private->state == DEV_STATE_DISCONNECTED) &&
- !ccw_device_is_orphan(cdev) &&
- ccw_dev_id_is_equal(&cdev->private->dev_id, &d->dev_id) &&
- (cdev != d->sibling))
- return 1;
- return 0;
-}
-
-static struct ccw_device * get_disc_ccwdev_by_dev_id(struct ccw_dev_id *dev_id,
- struct ccw_device *sibling)
-{
- struct device *dev;
- struct match_data data;
-
- data.dev_id = *dev_id;
- data.sibling = sibling;
- dev = bus_find_device(&ccw_bus_type, NULL, &data, match_devno);
-
- return dev ? to_ccwdev(dev) : NULL;
-}
-
-static int match_orphan(struct device *dev, void *data)
-{
- struct ccw_dev_id *dev_id;
- struct ccw_device *cdev;
-
- dev_id = data;
- cdev = to_ccwdev(dev);
return ccw_dev_id_is_equal(&cdev->private->dev_id, dev_id);
}
-static struct ccw_device *
-get_orphaned_ccwdev_by_dev_id(struct channel_subsystem *css,
- struct ccw_dev_id *dev_id)
+static struct ccw_device *get_ccwdev_by_dev_id(struct ccw_dev_id *dev_id)
{
struct device *dev;
- dev = device_find_child(&css->pseudo_subchannel->dev, dev_id,
- match_orphan);
+ dev = bus_find_device(&ccw_bus_type, NULL, dev_id, match_dev_id);
return dev ? to_ccwdev(dev) : NULL;
}
-void ccw_device_do_unbind_bind(struct work_struct *work)
+static void ccw_device_do_unbind_bind(struct ccw_device *cdev)
{
- struct ccw_device_private *priv;
- struct ccw_device *cdev;
- struct subchannel *sch;
int ret;
- priv = container_of(work, struct ccw_device_private, kick_work);
- cdev = priv->cdev;
- sch = to_subchannel(cdev->dev.parent);
-
- if (test_bit(1, &cdev->private->registered)) {
+ if (device_is_registered(&cdev->dev)) {
device_release_driver(&cdev->dev);
ret = device_attach(&cdev->dev);
WARN_ON(ret == -ENODEV);
@@ -773,6 +715,8 @@
return ERR_PTR(-ENOMEM);
}
+static void ccw_device_todo(struct work_struct *work);
+
static int io_subchannel_initialize_dev(struct subchannel *sch,
struct ccw_device *cdev)
{
@@ -780,7 +724,7 @@
atomic_set(&cdev->private->onoff, 0);
cdev->dev.parent = &sch->dev;
cdev->dev.release = ccw_device_release;
- INIT_WORK(&cdev->private->kick_work, NULL);
+ INIT_WORK(&cdev->private->todo_work, ccw_device_todo);
cdev->dev.groups = ccwdev_attr_groups;
/* Do first half of device_register. */
device_initialize(&cdev->dev);
@@ -789,6 +733,7 @@
put_device(&cdev->dev);
return -ENODEV;
}
+ cdev->private->flags.initialized = 1;
return 0;
}
@@ -806,76 +751,7 @@
return cdev;
}
-static int io_subchannel_recog(struct ccw_device *, struct subchannel *);
-
-static void sch_attach_device(struct subchannel *sch,
- struct ccw_device *cdev)
-{
- css_update_ssd_info(sch);
- spin_lock_irq(sch->lock);
- sch_set_cdev(sch, cdev);
- cdev->private->schid = sch->schid;
- cdev->ccwlock = sch->lock;
- ccw_device_trigger_reprobe(cdev);
- spin_unlock_irq(sch->lock);
-}
-
-static void sch_attach_disconnected_device(struct subchannel *sch,
- struct ccw_device *cdev)
-{
- struct subchannel *other_sch;
- int ret;
-
- /* Get reference for new parent. */
- if (!get_device(&sch->dev))
- return;
- other_sch = to_subchannel(cdev->dev.parent);
- /* Note: device_move() changes cdev->dev.parent */
- ret = device_move(&cdev->dev, &sch->dev, DPM_ORDER_PARENT_BEFORE_DEV);
- if (ret) {
- CIO_MSG_EVENT(0, "Moving disconnected device 0.%x.%04x failed "
- "(ret=%d)!\n", cdev->private->dev_id.ssid,
- cdev->private->dev_id.devno, ret);
- /* Put reference for new parent. */
- put_device(&sch->dev);
- return;
- }
- sch_set_cdev(other_sch, NULL);
- /* No need to keep a subchannel without ccw device around. */
- css_sch_device_unregister(other_sch);
- sch_attach_device(sch, cdev);
- /* Put reference for old parent. */
- put_device(&other_sch->dev);
-}
-
-static void sch_attach_orphaned_device(struct subchannel *sch,
- struct ccw_device *cdev)
-{
- int ret;
- struct subchannel *pseudo_sch;
-
- /* Get reference for new parent. */
- if (!get_device(&sch->dev))
- return;
- pseudo_sch = to_subchannel(cdev->dev.parent);
- /*
- * Try to move the ccw device to its new subchannel.
- * Note: device_move() changes cdev->dev.parent
- */
- ret = device_move(&cdev->dev, &sch->dev, DPM_ORDER_PARENT_BEFORE_DEV);
- if (ret) {
- CIO_MSG_EVENT(0, "Moving device 0.%x.%04x from orphanage "
- "failed (ret=%d)!\n",
- cdev->private->dev_id.ssid,
- cdev->private->dev_id.devno, ret);
- /* Put reference for new parent. */
- put_device(&sch->dev);
- return;
- }
- sch_attach_device(sch, cdev);
- /* Put reference on pseudo subchannel. */
- put_device(&pseudo_sch->dev);
-}
+static void io_subchannel_recog(struct ccw_device *, struct subchannel *);
static void sch_create_and_recog_new_device(struct subchannel *sch)
{
@@ -888,100 +764,19 @@
css_sch_device_unregister(sch);
return;
}
- spin_lock_irq(sch->lock);
- sch_set_cdev(sch, cdev);
- spin_unlock_irq(sch->lock);
/* Start recognition for the new ccw device. */
- if (io_subchannel_recog(cdev, sch)) {
- spin_lock_irq(sch->lock);
- sch_set_cdev(sch, NULL);
- spin_unlock_irq(sch->lock);
- css_sch_device_unregister(sch);
- /* Put reference from io_subchannel_create_ccwdev(). */
- put_device(&sch->dev);
- /* Give up initial reference. */
- put_device(&cdev->dev);
- }
-}
-
-
-void ccw_device_move_to_orphanage(struct work_struct *work)
-{
- struct ccw_device_private *priv;
- struct ccw_device *cdev;
- struct ccw_device *replacing_cdev;
- struct subchannel *sch;
- int ret;
- struct channel_subsystem *css;
- struct ccw_dev_id dev_id;
-
- priv = container_of(work, struct ccw_device_private, kick_work);
- cdev = priv->cdev;
- sch = to_subchannel(cdev->dev.parent);
- css = to_css(sch->dev.parent);
- dev_id.devno = sch->schib.pmcw.dev;
- dev_id.ssid = sch->schid.ssid;
-
- /* Increase refcount for pseudo subchannel. */
- get_device(&css->pseudo_subchannel->dev);
- /*
- * Move the orphaned ccw device to the orphanage so the replacing
- * ccw device can take its place on the subchannel.
- * Note: device_move() changes cdev->dev.parent
- */
- ret = device_move(&cdev->dev, &css->pseudo_subchannel->dev,
- DPM_ORDER_NONE);
- if (ret) {
- CIO_MSG_EVENT(0, "Moving device 0.%x.%04x to orphanage failed "
- "(ret=%d)!\n", cdev->private->dev_id.ssid,
- cdev->private->dev_id.devno, ret);
- /* Decrease refcount for pseudo subchannel again. */
- put_device(&css->pseudo_subchannel->dev);
- return;
- }
- cdev->ccwlock = css->pseudo_subchannel->lock;
- /*
- * Search for the replacing ccw device
- * - among the disconnected devices
- * - in the orphanage
- */
- replacing_cdev = get_disc_ccwdev_by_dev_id(&dev_id, cdev);
- if (replacing_cdev) {
- sch_attach_disconnected_device(sch, replacing_cdev);
- /* Release reference from get_disc_ccwdev_by_dev_id() */
- put_device(&replacing_cdev->dev);
- /* Release reference of subchannel from old cdev. */
- put_device(&sch->dev);
- return;
- }
- replacing_cdev = get_orphaned_ccwdev_by_dev_id(css, &dev_id);
- if (replacing_cdev) {
- sch_attach_orphaned_device(sch, replacing_cdev);
- /* Release reference from get_orphaned_ccwdev_by_dev_id() */
- put_device(&replacing_cdev->dev);
- /* Release reference of subchannel from old cdev. */
- put_device(&sch->dev);
- return;
- }
- sch_create_and_recog_new_device(sch);
- /* Release reference of subchannel from old cdev. */
- put_device(&sch->dev);
+ io_subchannel_recog(cdev, sch);
}
/*
* Register recognized device.
*/
-static void
-io_subchannel_register(struct work_struct *work)
+static void io_subchannel_register(struct ccw_device *cdev)
{
- struct ccw_device_private *priv;
- struct ccw_device *cdev;
struct subchannel *sch;
int ret;
unsigned long flags;
- priv = container_of(work, struct ccw_device_private, kick_work);
- cdev = priv->cdev;
sch = to_subchannel(cdev->dev.parent);
/*
* Check if subchannel is still registered. It may have become
@@ -1033,41 +828,23 @@
cdev->private->flags.recog_done = 1;
wake_up(&cdev->private->wait_q);
out_err:
- /* Release reference for workqueue processing. */
- put_device(&cdev->dev);
if (atomic_dec_and_test(&ccw_device_init_count))
wake_up(&ccw_device_init_wq);
}
-static void ccw_device_call_sch_unregister(struct work_struct *work)
+static void ccw_device_call_sch_unregister(struct ccw_device *cdev)
{
- struct ccw_device_private *priv;
- struct ccw_device *cdev;
struct subchannel *sch;
- priv = container_of(work, struct ccw_device_private, kick_work);
- cdev = priv->cdev;
/* Get subchannel reference for local processing. */
if (!get_device(cdev->dev.parent))
return;
sch = to_subchannel(cdev->dev.parent);
css_sch_device_unregister(sch);
- /* Release cdev reference for workqueue processing.*/
- put_device(&cdev->dev);
/* Release subchannel reference for local processing. */
put_device(&sch->dev);
}
-void ccw_device_schedule_sch_unregister(struct ccw_device *cdev)
-{
- /* Get cdev reference for workqueue processing. */
- if (!get_device(&cdev->dev))
- return;
- PREPARE_WORK(&cdev->private->kick_work,
- ccw_device_call_sch_unregister);
- queue_work(slow_path_wq, &cdev->private->kick_work);
-}
-
/*
* subchannel recognition done. Called from the state machine.
*/
@@ -1083,7 +860,8 @@
/* Device did not respond in time. */
case DEV_STATE_NOT_OPER:
cdev->private->flags.recog_done = 1;
- ccw_device_schedule_sch_unregister(cdev);
+ /* Remove device found not operational. */
+ ccw_device_sched_todo(cdev, CDEV_TODO_UNREG);
if (atomic_dec_and_test(&ccw_device_init_count))
wake_up(&ccw_device_init_wq);
break;
@@ -1092,22 +870,15 @@
* We can't register the device in interrupt context so
* we schedule a work item.
*/
- if (!get_device(&cdev->dev))
- break;
- PREPARE_WORK(&cdev->private->kick_work,
- io_subchannel_register);
- queue_work(slow_path_wq, &cdev->private->kick_work);
+ ccw_device_sched_todo(cdev, CDEV_TODO_REGISTER);
break;
}
}
-static int
-io_subchannel_recog(struct ccw_device *cdev, struct subchannel *sch)
+static void io_subchannel_recog(struct ccw_device *cdev, struct subchannel *sch)
{
- int rc;
struct ccw_device_private *priv;
- sch_set_cdev(sch, cdev);
cdev->ccwlock = sch->lock;
/* Init private data. */
@@ -1125,62 +896,81 @@
/* Start async. device sensing. */
spin_lock_irq(sch->lock);
- rc = ccw_device_recognition(cdev);
+ sch_set_cdev(sch, cdev);
+ ccw_device_recognition(cdev);
spin_unlock_irq(sch->lock);
- if (rc) {
- if (atomic_dec_and_test(&ccw_device_init_count))
- wake_up(&ccw_device_init_wq);
- }
- return rc;
}
-static void ccw_device_move_to_sch(struct work_struct *work)
+static int ccw_device_move_to_sch(struct ccw_device *cdev,
+ struct subchannel *sch)
{
- struct ccw_device_private *priv;
- int rc;
- struct subchannel *sch;
- struct ccw_device *cdev;
- struct subchannel *former_parent;
+ struct subchannel *old_sch;
+ int rc, old_enabled = 0;
- priv = container_of(work, struct ccw_device_private, kick_work);
- sch = priv->sch;
- cdev = priv->cdev;
- former_parent = to_subchannel(cdev->dev.parent);
- /* Get reference for new parent. */
+ old_sch = to_subchannel(cdev->dev.parent);
+ /* Obtain child reference for new parent. */
if (!get_device(&sch->dev))
- return;
+ return -ENODEV;
+
+ if (!sch_is_pseudo_sch(old_sch)) {
+ spin_lock_irq(old_sch->lock);
+ old_enabled = old_sch->schib.pmcw.ena;
+ rc = 0;
+ if (old_enabled)
+ rc = cio_disable_subchannel(old_sch);
+ spin_unlock_irq(old_sch->lock);
+ if (rc == -EBUSY) {
+ /* Release child reference for new parent. */
+ put_device(&sch->dev);
+ return rc;
+ }
+ }
+
mutex_lock(&sch->reg_mutex);
- /*
- * Try to move the ccw device to its new subchannel.
- * Note: device_move() changes cdev->dev.parent
- */
rc = device_move(&cdev->dev, &sch->dev, DPM_ORDER_PARENT_BEFORE_DEV);
mutex_unlock(&sch->reg_mutex);
if (rc) {
- CIO_MSG_EVENT(0, "Moving device 0.%x.%04x to subchannel "
- "0.%x.%04x failed (ret=%d)!\n",
+ CIO_MSG_EVENT(0, "device_move(0.%x.%04x,0.%x.%04x)=%d\n",
cdev->private->dev_id.ssid,
cdev->private->dev_id.devno, sch->schid.ssid,
- sch->schid.sch_no, rc);
- css_sch_device_unregister(sch);
- /* Put reference for new parent again. */
+ sch->schib.pmcw.dev, rc);
+ if (old_enabled) {
+ /* Try to reenable the old subchannel. */
+ spin_lock_irq(old_sch->lock);
+ cio_enable_subchannel(old_sch, (u32)(addr_t)old_sch);
+ spin_unlock_irq(old_sch->lock);
+ }
+ /* Release child reference for new parent. */
put_device(&sch->dev);
- goto out;
+ return rc;
}
- if (!sch_is_pseudo_sch(former_parent)) {
- spin_lock_irq(former_parent->lock);
- sch_set_cdev(former_parent, NULL);
- spin_unlock_irq(former_parent->lock);
- css_sch_device_unregister(former_parent);
- /* Reset intparm to zeroes. */
- former_parent->config.intparm = 0;
- cio_commit_config(former_parent);
+ /* Clean up old subchannel. */
+ if (!sch_is_pseudo_sch(old_sch)) {
+ spin_lock_irq(old_sch->lock);
+ sch_set_cdev(old_sch, NULL);
+ spin_unlock_irq(old_sch->lock);
+ css_schedule_eval(old_sch->schid);
}
- sch_attach_device(sch, cdev);
-out:
- /* Put reference for old parent. */
- put_device(&former_parent->dev);
- put_device(&cdev->dev);
+ /* Release child reference for old parent. */
+ put_device(&old_sch->dev);
+ /* Initialize new subchannel. */
+ spin_lock_irq(sch->lock);
+ cdev->private->schid = sch->schid;
+ cdev->ccwlock = sch->lock;
+ if (!sch_is_pseudo_sch(sch))
+ sch_set_cdev(sch, cdev);
+ spin_unlock_irq(sch->lock);
+ if (!sch_is_pseudo_sch(sch))
+ css_update_ssd_info(sch);
+ return 0;
+}
+
+static int ccw_device_move_to_orph(struct ccw_device *cdev)
+{
+ struct subchannel *sch = to_subchannel(cdev->dev.parent);
+ struct channel_subsystem *css = to_css(sch->dev.parent);
+
+ return ccw_device_move_to_sch(cdev, css->pseudo_subchannel);
}
static void io_subchannel_irq(struct subchannel *sch)
@@ -1199,9 +989,6 @@
{
memset(&sch->config, 0, sizeof(sch->config));
sch->config.csense = 1;
- /* Use subchannel mp mode when there is more than 1 installed CHPID. */
- if ((sch->schib.pmcw.pim & (sch->schib.pmcw.pim - 1)) != 0)
- sch->config.mp = 1;
}
static void io_subchannel_init_fields(struct subchannel *sch)
@@ -1222,23 +1009,6 @@
io_subchannel_init_config(sch);
}
-static void io_subchannel_do_unreg(struct work_struct *work)
-{
- struct subchannel *sch;
-
- sch = container_of(work, struct subchannel, work);
- css_sch_device_unregister(sch);
- put_device(&sch->dev);
-}
-
-/* Schedule unregister if we have no cdev. */
-static void io_subchannel_schedule_removal(struct subchannel *sch)
-{
- get_device(&sch->dev);
- INIT_WORK(&sch->work, io_subchannel_do_unreg);
- queue_work(slow_path_wq, &sch->work);
-}
-
/*
* Note: We always return 0 so that we bind to the device even on error.
* This is needed so that our remove function is called on unregister.
@@ -1247,8 +1017,6 @@
{
struct ccw_device *cdev;
int rc;
- unsigned long flags;
- struct ccw_dev_id dev_id;
if (cio_is_console(sch->schid)) {
rc = sysfs_create_group(&sch->dev.kobj,
@@ -1268,6 +1036,7 @@
cdev = sch_get_cdev(sch);
cdev->dev.groups = ccwdev_attr_groups;
device_initialize(&cdev->dev);
+ cdev->private->flags.initialized = 1;
ccw_device_register(cdev);
/*
* Check if the device is already online. If it is
@@ -1292,44 +1061,14 @@
sch->private = kzalloc(sizeof(struct io_subchannel_private),
GFP_KERNEL | GFP_DMA);
if (!sch->private)
- goto out_err;
- /*
- * First check if a fitting device may be found amongst the
- * disconnected devices or in the orphanage.
- */
- dev_id.devno = sch->schib.pmcw.dev;
- dev_id.ssid = sch->schid.ssid;
- cdev = get_disc_ccwdev_by_dev_id(&dev_id, NULL);
- if (!cdev)
- cdev = get_orphaned_ccwdev_by_dev_id(to_css(sch->dev.parent),
- &dev_id);
- if (cdev) {
- /*
- * Schedule moving the device until when we have a registered
- * subchannel to move to and succeed the probe. We can
- * unregister later again, when the probe is through.
- */
- cdev->private->sch = sch;
- PREPARE_WORK(&cdev->private->kick_work,
- ccw_device_move_to_sch);
- queue_work(slow_path_wq, &cdev->private->kick_work);
- return 0;
- }
- cdev = io_subchannel_create_ccwdev(sch);
- if (IS_ERR(cdev))
- goto out_err;
- rc = io_subchannel_recog(cdev, sch);
- if (rc) {
- spin_lock_irqsave(sch->lock, flags);
- io_subchannel_recog_done(cdev);
- spin_unlock_irqrestore(sch->lock, flags);
- }
+ goto out_schedule;
+ css_schedule_eval(sch->schid);
return 0;
-out_err:
- kfree(sch->private);
- sysfs_remove_group(&sch->dev.kobj, &io_subchannel_attr_group);
+
out_schedule:
- io_subchannel_schedule_removal(sch);
+ spin_lock_irq(sch->lock);
+ css_sched_sch_todo(sch, SCH_TODO_UNREG);
+ spin_unlock_irq(sch->lock);
return 0;
}
@@ -1337,32 +1076,23 @@
io_subchannel_remove (struct subchannel *sch)
{
struct ccw_device *cdev;
- unsigned long flags;
cdev = sch_get_cdev(sch);
if (!cdev)
- return 0;
+ goto out_free;
+ io_subchannel_quiesce(sch);
/* Set ccw device to not operational and drop reference. */
- spin_lock_irqsave(cdev->ccwlock, flags);
+ spin_lock_irq(cdev->ccwlock);
sch_set_cdev(sch, NULL);
cdev->private->state = DEV_STATE_NOT_OPER;
- spin_unlock_irqrestore(cdev->ccwlock, flags);
+ spin_unlock_irq(cdev->ccwlock);
ccw_device_unregister(cdev);
+out_free:
kfree(sch->private);
sysfs_remove_group(&sch->dev.kobj, &io_subchannel_attr_group);
return 0;
}
-static int io_subchannel_notify(struct subchannel *sch, int event)
-{
- struct ccw_device *cdev;
-
- cdev = sch_get_cdev(sch);
- if (!cdev)
- return 0;
- return ccw_device_notify(cdev, event);
-}
-
static void io_subchannel_verify(struct subchannel *sch)
{
struct ccw_device *cdev;
@@ -1372,36 +1102,6 @@
dev_fsm_event(cdev, DEV_EVENT_VERIFY);
}
-static int check_for_io_on_path(struct subchannel *sch, int mask)
-{
- if (cio_update_schib(sch))
- return 0;
- if (scsw_actl(&sch->schib.scsw) && sch->schib.pmcw.lpum == mask)
- return 1;
- return 0;
-}
-
-static void terminate_internal_io(struct subchannel *sch,
- struct ccw_device *cdev)
-{
- if (cio_clear(sch)) {
- /* Recheck device in case clear failed. */
- sch->lpm = 0;
- if (cdev->online)
- dev_fsm_event(cdev, DEV_EVENT_VERIFY);
- else
- css_schedule_eval(sch->schid);
- return;
- }
- cdev->private->state = DEV_STATE_CLEAR_VERIFY;
- /* Request retry of internal operation. */
- cdev->private->flags.intretry = 1;
- /* Call handler. */
- if (cdev->handler)
- cdev->handler(cdev, cdev->private->intparm,
- ERR_PTR(-EIO));
-}
-
static void io_subchannel_terminate_path(struct subchannel *sch, u8 mask)
{
struct ccw_device *cdev;
@@ -1409,18 +1109,24 @@
cdev = sch_get_cdev(sch);
if (!cdev)
return;
- if (check_for_io_on_path(sch, mask)) {
- if (cdev->private->state == DEV_STATE_ONLINE)
- ccw_device_kill_io(cdev);
- else {
- terminate_internal_io(sch, cdev);
- /* Re-start path verification. */
- dev_fsm_event(cdev, DEV_EVENT_VERIFY);
- }
- } else
- /* trigger path verification. */
- dev_fsm_event(cdev, DEV_EVENT_VERIFY);
+ if (cio_update_schib(sch))
+ goto err;
+ /* Check for I/O on path. */
+ if (scsw_actl(&sch->schib.scsw) == 0 || sch->schib.pmcw.lpum != mask)
+ goto out;
+ if (cdev->private->state == DEV_STATE_ONLINE) {
+ ccw_device_kill_io(cdev);
+ goto out;
+ }
+ if (cio_clear(sch))
+ goto err;
+out:
+ /* Trigger path verification. */
+ dev_fsm_event(cdev, DEV_EVENT_VERIFY);
+ return;
+err:
+ dev_fsm_event(cdev, DEV_EVENT_NOTOPER);
}
static int io_subchannel_chp_event(struct subchannel *sch,
@@ -1457,46 +1163,41 @@
return 0;
}
-static void
-io_subchannel_shutdown(struct subchannel *sch)
+static void io_subchannel_quiesce(struct subchannel *sch)
{
struct ccw_device *cdev;
int ret;
+ spin_lock_irq(sch->lock);
cdev = sch_get_cdev(sch);
-
if (cio_is_console(sch->schid))
- return;
+ goto out_unlock;
if (!sch->schib.pmcw.ena)
- /* Nothing to do. */
- return;
+ goto out_unlock;
ret = cio_disable_subchannel(sch);
if (ret != -EBUSY)
- /* Subchannel is disabled, we're done. */
- return;
- cdev->private->state = DEV_STATE_QUIESCE;
+ goto out_unlock;
if (cdev->handler)
- cdev->handler(cdev, cdev->private->intparm,
- ERR_PTR(-EIO));
- ret = ccw_device_cancel_halt_clear(cdev);
- if (ret == -EBUSY) {
- ccw_device_set_timeout(cdev, HZ/10);
- wait_event(cdev->private->wait_q, dev_fsm_final_state(cdev));
+ cdev->handler(cdev, cdev->private->intparm, ERR_PTR(-EIO));
+ while (ret == -EBUSY) {
+ cdev->private->state = DEV_STATE_QUIESCE;
+ ret = ccw_device_cancel_halt_clear(cdev);
+ if (ret == -EBUSY) {
+ ccw_device_set_timeout(cdev, HZ/10);
+ spin_unlock_irq(sch->lock);
+ wait_event(cdev->private->wait_q,
+ cdev->private->state != DEV_STATE_QUIESCE);
+ spin_lock_irq(sch->lock);
+ }
+ ret = cio_disable_subchannel(sch);
}
- cio_disable_subchannel(sch);
+out_unlock:
+ spin_unlock_irq(sch->lock);
}
-static int io_subchannel_get_status(struct subchannel *sch)
+static void io_subchannel_shutdown(struct subchannel *sch)
{
- struct schib schib;
-
- if (stsch(sch->schid, &schib) || !schib.pmcw.dnv)
- return CIO_GONE;
- if (sch->schib.pmcw.dnv && (schib.pmcw.dev != sch->schib.pmcw.dev))
- return CIO_REVALIDATE;
- if (!sch->lpm)
- return CIO_NO_PATH;
- return CIO_OPER;
+ io_subchannel_quiesce(sch);
}
static int device_is_disconnected(struct ccw_device *cdev)
@@ -1575,20 +1276,16 @@
static int purge_fn(struct device *dev, void *data)
{
struct ccw_device *cdev = to_ccwdev(dev);
- struct ccw_device_private *priv = cdev->private;
- int unreg;
+ struct ccw_dev_id *id = &cdev->private->dev_id;
spin_lock_irq(cdev->ccwlock);
- unreg = is_blacklisted(priv->dev_id.ssid, priv->dev_id.devno) &&
- (priv->state == DEV_STATE_OFFLINE);
+ if (is_blacklisted(id->ssid, id->devno) &&
+ (cdev->private->state == DEV_STATE_OFFLINE)) {
+ CIO_MSG_EVENT(3, "ccw: purging 0.%x.%04x\n", id->ssid,
+ id->devno);
+ ccw_device_sched_todo(cdev, CDEV_TODO_UNREG);
+ }
spin_unlock_irq(cdev->ccwlock);
- if (!unreg)
- goto out;
- CIO_MSG_EVENT(3, "ccw: purging 0.%x.%04x\n", priv->dev_id.ssid,
- priv->dev_id.devno);
- ccw_device_schedule_sch_unregister(cdev);
-
-out:
/* Abort loop in case of pending signal. */
if (signal_pending(current))
return -EINTR;
@@ -1630,91 +1327,169 @@
cdev->private->state = DEV_STATE_NOT_OPER;
}
-static int io_subchannel_sch_event(struct subchannel *sch, int slow)
+enum io_sch_action {
+ IO_SCH_UNREG,
+ IO_SCH_ORPH_UNREG,
+ IO_SCH_ATTACH,
+ IO_SCH_UNREG_ATTACH,
+ IO_SCH_ORPH_ATTACH,
+ IO_SCH_REPROBE,
+ IO_SCH_VERIFY,
+ IO_SCH_DISC,
+ IO_SCH_NOP,
+};
+
+static enum io_sch_action sch_get_action(struct subchannel *sch)
{
- int event, ret, disc;
- unsigned long flags;
- enum { NONE, UNREGISTER, UNREGISTER_PROBE, REPROBE, DISC } action;
struct ccw_device *cdev;
- spin_lock_irqsave(sch->lock, flags);
cdev = sch_get_cdev(sch);
- disc = device_is_disconnected(cdev);
- if (disc && slow) {
- /* Disconnected devices are evaluated directly only.*/
- spin_unlock_irqrestore(sch->lock, flags);
- return 0;
+ if (cio_update_schib(sch)) {
+ /* Not operational. */
+ if (!cdev)
+ return IO_SCH_UNREG;
+ if (!ccw_device_notify(cdev, CIO_GONE))
+ return IO_SCH_UNREG;
+ return IO_SCH_ORPH_UNREG;
}
- /* No interrupt after machine check - kill pending timers. */
- if (cdev)
- ccw_device_set_timeout(cdev, 0);
- if (!disc && !slow) {
- /* Non-disconnected devices are evaluated on the slow path. */
- spin_unlock_irqrestore(sch->lock, flags);
- return -EAGAIN;
+ /* Operational. */
+ if (!cdev)
+ return IO_SCH_ATTACH;
+ if (sch->schib.pmcw.dev != cdev->private->dev_id.devno) {
+ if (!ccw_device_notify(cdev, CIO_GONE))
+ return IO_SCH_UNREG_ATTACH;
+ return IO_SCH_ORPH_ATTACH;
}
- event = io_subchannel_get_status(sch);
- CIO_MSG_EVENT(4, "Evaluating schid 0.%x.%04x, event %d, %s, %s path.\n",
- sch->schid.ssid, sch->schid.sch_no, event,
- disc ? "disconnected" : "normal",
- slow ? "slow" : "fast");
- /* Analyze subchannel status. */
- action = NONE;
- switch (event) {
- case CIO_NO_PATH:
- if (disc) {
- /* Check if paths have become available. */
- action = REPROBE;
- break;
- }
- /* fall through */
- case CIO_GONE:
- /* Ask driver what to do with device. */
- if (io_subchannel_notify(sch, event))
- action = DISC;
- else
- action = UNREGISTER;
- break;
- case CIO_REVALIDATE:
- /* Device will be removed, so no notify necessary. */
- if (disc)
- /* Reprobe because immediate unregister might block. */
- action = REPROBE;
- else
- action = UNREGISTER_PROBE;
- break;
- case CIO_OPER:
- if (disc)
- /* Get device operational again. */
- action = REPROBE;
- break;
+ if ((sch->schib.pmcw.pam & sch->opm) == 0) {
+ if (!ccw_device_notify(cdev, CIO_NO_PATH))
+ return IO_SCH_UNREG;
+ return IO_SCH_DISC;
}
- /* Perform action. */
- ret = 0;
+ if (device_is_disconnected(cdev))
+ return IO_SCH_REPROBE;
+ if (cdev->online)
+ return IO_SCH_VERIFY;
+ return IO_SCH_NOP;
+}
+
+/**
+ * io_subchannel_sch_event - process subchannel event
+ * @sch: subchannel
+ * @process: non-zero if function is called in process context
+ *
+ * An unspecified event occurred for this subchannel. Adjust data according
+ * to the current operational state of the subchannel and device. Return
+ * zero when the event has been handled sufficiently or -EAGAIN when this
+ * function should be called again in process context.
+ */
+static int io_subchannel_sch_event(struct subchannel *sch, int process)
+{
+ unsigned long flags;
+ struct ccw_device *cdev;
+ struct ccw_dev_id dev_id;
+ enum io_sch_action action;
+ int rc = -EAGAIN;
+
+ spin_lock_irqsave(sch->lock, flags);
+ if (!device_is_registered(&sch->dev))
+ goto out_unlock;
+ if (work_pending(&sch->todo_work))
+ goto out_unlock;
+ cdev = sch_get_cdev(sch);
+ if (cdev && work_pending(&cdev->private->todo_work))
+ goto out_unlock;
+ action = sch_get_action(sch);
+ CIO_MSG_EVENT(2, "event: sch 0.%x.%04x, process=%d, action=%d\n",
+ sch->schid.ssid, sch->schid.sch_no, process,
+ action);
+ /* Perform immediate actions while holding the lock. */
switch (action) {
- case UNREGISTER:
- case UNREGISTER_PROBE:
- ccw_device_set_notoper(cdev);
- /* Unregister device (will use subchannel lock). */
- spin_unlock_irqrestore(sch->lock, flags);
- css_sch_device_unregister(sch);
- spin_lock_irqsave(sch->lock, flags);
- break;
- case REPROBE:
+ case IO_SCH_REPROBE:
+ /* Trigger device recognition. */
ccw_device_trigger_reprobe(cdev);
- break;
- case DISC:
+ rc = 0;
+ goto out_unlock;
+ case IO_SCH_VERIFY:
+ /* Trigger path verification. */
+ io_subchannel_verify(sch);
+ rc = 0;
+ goto out_unlock;
+ case IO_SCH_DISC:
+ ccw_device_set_disconnected(cdev);
+ rc = 0;
+ goto out_unlock;
+ case IO_SCH_ORPH_UNREG:
+ case IO_SCH_ORPH_ATTACH:
ccw_device_set_disconnected(cdev);
break;
+ case IO_SCH_UNREG_ATTACH:
+ case IO_SCH_UNREG:
+ if (cdev)
+ ccw_device_set_notoper(cdev);
+ break;
+ case IO_SCH_NOP:
+ rc = 0;
+ goto out_unlock;
default:
break;
}
spin_unlock_irqrestore(sch->lock, flags);
- /* Probe if necessary. */
- if (action == UNREGISTER_PROBE)
- ret = css_probe_device(sch->schid);
+ /* All other actions require process context. */
+ if (!process)
+ goto out;
+ /* Handle attached ccw device. */
+ switch (action) {
+ case IO_SCH_ORPH_UNREG:
+ case IO_SCH_ORPH_ATTACH:
+ /* Move ccw device to orphanage. */
+ rc = ccw_device_move_to_orph(cdev);
+ if (rc)
+ goto out;
+ break;
+ case IO_SCH_UNREG_ATTACH:
+ /* Unregister ccw device. */
+ ccw_device_unregister(cdev);
+ break;
+ default:
+ break;
+ }
+ /* Handle subchannel. */
+ switch (action) {
+ case IO_SCH_ORPH_UNREG:
+ case IO_SCH_UNREG:
+ css_sch_device_unregister(sch);
+ break;
+ case IO_SCH_ORPH_ATTACH:
+ case IO_SCH_UNREG_ATTACH:
+ case IO_SCH_ATTACH:
+ dev_id.ssid = sch->schid.ssid;
+ dev_id.devno = sch->schib.pmcw.dev;
+ cdev = get_ccwdev_by_dev_id(&dev_id);
+ if (!cdev) {
+ sch_create_and_recog_new_device(sch);
+ break;
+ }
+ rc = ccw_device_move_to_sch(cdev, sch);
+ if (rc) {
+ /* Release reference from get_ccwdev_by_dev_id() */
+ put_device(&cdev->dev);
+ goto out;
+ }
+ spin_lock_irqsave(sch->lock, flags);
+ ccw_device_trigger_reprobe(cdev);
+ spin_unlock_irqrestore(sch->lock, flags);
+ /* Release reference from get_ccwdev_by_dev_id() */
+ put_device(&cdev->dev);
+ break;
+ default:
+ break;
+ }
+ return 0;
- return ret;
+out_unlock:
+ spin_unlock_irqrestore(sch->lock, flags);
+out:
+ return rc;
}
#ifdef CONFIG_CCW_CONSOLE
@@ -1744,10 +1519,7 @@
sch->driver = &io_subchannel_driver;
/* Initialize the ccw_device structure. */
cdev->dev.parent= &sch->dev;
- rc = io_subchannel_recog(cdev, sch);
- if (rc)
- return rc;
-
+ io_subchannel_recog(cdev, sch);
/* Now wait for the async. recognition to come to an end. */
spin_lock_irq(cdev->ccwlock);
while (!dev_fsm_final_state(cdev))
@@ -1763,7 +1535,7 @@
rc = 0;
out_unlock:
spin_unlock_irq(cdev->ccwlock);
- return 0;
+ return rc;
}
struct ccw_device *
@@ -1919,7 +1691,7 @@
{
struct ccw_device *cdev = to_ccwdev(dev);
- if (work_pending(&cdev->private->kick_work))
+ if (work_pending(&cdev->private->todo_work))
return -EAGAIN;
/* Fail while device is being set online/offline. */
if (atomic_read(&cdev->private->onoff))
@@ -2005,7 +1777,6 @@
static void __ccw_device_pm_restore(struct ccw_device *cdev)
{
struct subchannel *sch = to_subchannel(cdev->dev.parent);
- int ret;
if (cio_is_console(sch->schid))
goto out;
@@ -2015,22 +1786,10 @@
*/
spin_lock_irq(sch->lock);
cdev->private->flags.resuming = 1;
- ret = ccw_device_recognition(cdev);
+ ccw_device_recognition(cdev);
spin_unlock_irq(sch->lock);
- if (ret) {
- CIO_MSG_EVENT(0, "Couldn't start recognition for device "
- "0.%x.%04x (ret=%d)\n",
- cdev->private->dev_id.ssid,
- cdev->private->dev_id.devno, ret);
- spin_lock_irq(sch->lock);
- cdev->private->state = DEV_STATE_DISCONNECTED;
- spin_unlock_irq(sch->lock);
- /* notify driver after the resume cb */
- goto out;
- }
wait_event(cdev->private->wait_q, dev_fsm_final_state(cdev) ||
cdev->private->state == DEV_STATE_DISCONNECTED);
-
out:
cdev->private->flags.resuming = 0;
}
@@ -2040,7 +1799,7 @@
cdev->private->state = DEV_STATE_BOXED;
if (ccw_device_notify(cdev, CIO_BOXED))
return 0;
- ccw_device_schedule_sch_unregister(cdev);
+ ccw_device_sched_todo(cdev, CDEV_TODO_UNREG);
return -ENODEV;
}
@@ -2049,7 +1808,7 @@
cdev->private->state = DEV_STATE_DISCONNECTED;
if (ccw_device_notify(cdev, CIO_GONE))
return 0;
- ccw_device_schedule_sch_unregister(cdev);
+ ccw_device_sched_todo(cdev, CDEV_TODO_UNREG);
return -ENODEV;
}
@@ -2094,9 +1853,7 @@
/* check if the device type has changed */
if (!ccw_device_test_sense_data(cdev)) {
ccw_device_update_sense_data(cdev);
- PREPARE_WORK(&cdev->private->kick_work,
- ccw_device_do_unbind_bind);
- queue_work(ccw_device_work, &cdev->private->kick_work);
+ ccw_device_sched_todo(cdev, CDEV_TODO_REBIND);
ret = -ENODEV;
goto out_unlock;
}
@@ -2140,7 +1897,7 @@
goto out_restore;
out_unreg_unlock:
- ccw_device_schedule_sch_unregister(cdev);
+ ccw_device_sched_todo(cdev, CDEV_TODO_UNREG_EVAL);
ret = -ENODEV;
out_unlock:
spin_unlock_irq(sch->lock);
@@ -2205,6 +1962,77 @@
return sch->schid;
}
+static void ccw_device_todo(struct work_struct *work)
+{
+ struct ccw_device_private *priv;
+ struct ccw_device *cdev;
+ struct subchannel *sch;
+ enum cdev_todo todo;
+
+ priv = container_of(work, struct ccw_device_private, todo_work);
+ cdev = priv->cdev;
+ sch = to_subchannel(cdev->dev.parent);
+ /* Find out todo. */
+ spin_lock_irq(cdev->ccwlock);
+ todo = priv->todo;
+ priv->todo = CDEV_TODO_NOTHING;
+ CIO_MSG_EVENT(4, "cdev_todo: cdev=0.%x.%04x todo=%d\n",
+ priv->dev_id.ssid, priv->dev_id.devno, todo);
+ spin_unlock_irq(cdev->ccwlock);
+ /* Perform todo. */
+ switch (todo) {
+ case CDEV_TODO_ENABLE_CMF:
+ cmf_reenable(cdev);
+ break;
+ case CDEV_TODO_REBIND:
+ ccw_device_do_unbind_bind(cdev);
+ break;
+ case CDEV_TODO_REGISTER:
+ io_subchannel_register(cdev);
+ break;
+ case CDEV_TODO_UNREG_EVAL:
+ if (!sch_is_pseudo_sch(sch))
+ css_schedule_eval(sch->schid);
+ /* fall-through */
+ case CDEV_TODO_UNREG:
+ if (sch_is_pseudo_sch(sch))
+ ccw_device_unregister(cdev);
+ else
+ ccw_device_call_sch_unregister(cdev);
+ break;
+ default:
+ break;
+ }
+ /* Release workqueue ref. */
+ put_device(&cdev->dev);
+}
+
+/**
+ * ccw_device_sched_todo - schedule ccw device operation
+ * @cdev: ccw device
+ * @todo: todo
+ *
+ * Schedule the operation identified by @todo to be performed on the slow path
+ * workqueue. Do nothing if another operation with higher priority is already
+ * scheduled. Needs to be called with ccwdev lock held.
+ */
+void ccw_device_sched_todo(struct ccw_device *cdev, enum cdev_todo todo)
+{
+ CIO_MSG_EVENT(4, "cdev_todo: sched cdev=0.%x.%04x todo=%d\n",
+ cdev->private->dev_id.ssid, cdev->private->dev_id.devno,
+ todo);
+ if (cdev->private->todo >= todo)
+ return;
+ cdev->private->todo = todo;
+ /* Get workqueue ref. */
+ if (!get_device(&cdev->dev))
+ return;
+ if (!queue_work(slow_path_wq, &cdev->private->todo_work)) {
+ /* Already queued, release workqueue ref. */
+ put_device(&cdev->dev);
+ }
+}
+
MODULE_LICENSE("GPL");
EXPORT_SYMBOL(ccw_device_set_online);
EXPORT_SYMBOL(ccw_device_set_offline);
diff --git a/drivers/s390/cio/device.h b/drivers/s390/cio/device.h
index 246c648..bcfe13e 100644
--- a/drivers/s390/cio/device.h
+++ b/drivers/s390/cio/device.h
@@ -21,7 +21,6 @@
DEV_STATE_DISBAND_PGID,
DEV_STATE_BOXED,
/* states to wait for i/o completion before doing something */
- DEV_STATE_CLEAR_VERIFY,
DEV_STATE_TIMEOUT_KILL,
DEV_STATE_QUIESCE,
/* special states for devices gone not operational */
@@ -29,6 +28,7 @@
DEV_STATE_DISCONNECTED_SENSE_ID,
DEV_STATE_CMFCHANGE,
DEV_STATE_CMFUPDATE,
+ DEV_STATE_STEAL_LOCK,
/* last element! */
NR_DEV_STATES
};
@@ -81,17 +81,16 @@
int ccw_device_cancel_halt_clear(struct ccw_device *);
-void ccw_device_do_unbind_bind(struct work_struct *);
-void ccw_device_move_to_orphanage(struct work_struct *);
int ccw_device_is_orphan(struct ccw_device *);
-int ccw_device_recognition(struct ccw_device *);
+void ccw_device_recognition(struct ccw_device *);
int ccw_device_online(struct ccw_device *);
int ccw_device_offline(struct ccw_device *);
void ccw_device_update_sense_data(struct ccw_device *);
int ccw_device_test_sense_data(struct ccw_device *);
void ccw_device_schedule_sch_unregister(struct ccw_device *);
int ccw_purge_blacklisted(void);
+void ccw_device_sched_todo(struct ccw_device *cdev, enum cdev_todo todo);
/* Function prototypes for device status and basic sense stuff. */
void ccw_device_accumulate_irb(struct ccw_device *, struct irb *);
@@ -99,24 +98,28 @@
int ccw_device_accumulate_and_sense(struct ccw_device *, struct irb *);
int ccw_device_do_sense(struct ccw_device *, struct irb *);
+/* Function prototype for internal request handling. */
+int lpm_adjust(int lpm, int mask);
+void ccw_request_start(struct ccw_device *);
+int ccw_request_cancel(struct ccw_device *cdev);
+void ccw_request_handler(struct ccw_device *cdev);
+void ccw_request_timeout(struct ccw_device *cdev);
+void ccw_request_notoper(struct ccw_device *cdev);
+
/* Function prototypes for sense id stuff. */
void ccw_device_sense_id_start(struct ccw_device *);
-void ccw_device_sense_id_irq(struct ccw_device *, enum dev_event);
void ccw_device_sense_id_done(struct ccw_device *, int);
/* Function prototypes for path grouping stuff. */
-void ccw_device_sense_pgid_start(struct ccw_device *);
-void ccw_device_sense_pgid_irq(struct ccw_device *, enum dev_event);
-void ccw_device_sense_pgid_done(struct ccw_device *, int);
-
void ccw_device_verify_start(struct ccw_device *);
-void ccw_device_verify_irq(struct ccw_device *, enum dev_event);
void ccw_device_verify_done(struct ccw_device *, int);
void ccw_device_disband_start(struct ccw_device *);
-void ccw_device_disband_irq(struct ccw_device *, enum dev_event);
void ccw_device_disband_done(struct ccw_device *, int);
+void ccw_device_stlck_start(struct ccw_device *, void *, void *, void *);
+void ccw_device_stlck_done(struct ccw_device *, void *, int);
+
int ccw_device_call_handler(struct ccw_device *);
int ccw_device_stlck(struct ccw_device *);
diff --git a/drivers/s390/cio/device_fsm.c b/drivers/s390/cio/device_fsm.c
index b9613d7..ae76065 100644
--- a/drivers/s390/cio/device_fsm.c
+++ b/drivers/s390/cio/device_fsm.c
@@ -229,8 +229,8 @@
sch = to_subchannel(cdev->dev.parent);
- ccw_device_set_timeout(cdev, 0);
- cio_disable_subchannel(sch);
+ if (cio_disable_subchannel(sch))
+ state = DEV_STATE_NOT_OPER;
/*
* Now that we tried recognition, we have performed device selection
* through ssch() and the path information is up to date.
@@ -263,22 +263,10 @@
}
switch (state) {
case DEV_STATE_NOT_OPER:
- CIO_MSG_EVENT(2, "SenseID : unknown device %04x on "
- "subchannel 0.%x.%04x\n",
- cdev->private->dev_id.devno,
- sch->schid.ssid, sch->schid.sch_no);
break;
case DEV_STATE_OFFLINE:
if (!cdev->online) {
ccw_device_update_sense_data(cdev);
- /* Issue device info message. */
- CIO_MSG_EVENT(4, "SenseID : device 0.%x.%04x reports: "
- "CU Type/Mod = %04X/%02X, Dev Type/Mod "
- "= %04X/%02X\n",
- cdev->private->dev_id.ssid,
- cdev->private->dev_id.devno,
- cdev->id.cu_type, cdev->id.cu_model,
- cdev->id.dev_type, cdev->id.dev_model);
break;
}
cdev->private->state = DEV_STATE_OFFLINE;
@@ -289,16 +277,10 @@
wake_up(&cdev->private->wait_q);
} else {
ccw_device_update_sense_data(cdev);
- PREPARE_WORK(&cdev->private->kick_work,
- ccw_device_do_unbind_bind);
- queue_work(ccw_device_work, &cdev->private->kick_work);
+ ccw_device_sched_todo(cdev, CDEV_TODO_REBIND);
}
return;
case DEV_STATE_BOXED:
- CIO_MSG_EVENT(0, "SenseID : boxed device %04x on "
- " subchannel 0.%x.%04x\n",
- cdev->private->dev_id.devno,
- sch->schid.ssid, sch->schid.sch_no);
if (cdev->id.cu_type != 0) { /* device was recognized before */
cdev->private->flags.recog_done = 1;
cdev->private->state = DEV_STATE_BOXED;
@@ -343,28 +325,16 @@
return cdev->drv->notify ? cdev->drv->notify(cdev, event) : 0;
}
-static void cmf_reenable_delayed(struct work_struct *work)
-{
- struct ccw_device_private *priv;
- struct ccw_device *cdev;
-
- priv = container_of(work, struct ccw_device_private, kick_work);
- cdev = priv->cdev;
- cmf_reenable(cdev);
-}
-
static void ccw_device_oper_notify(struct ccw_device *cdev)
{
if (ccw_device_notify(cdev, CIO_OPER)) {
/* Reenable channel measurements, if needed. */
- PREPARE_WORK(&cdev->private->kick_work, cmf_reenable_delayed);
- queue_work(ccw_device_work, &cdev->private->kick_work);
+ ccw_device_sched_todo(cdev, CDEV_TODO_ENABLE_CMF);
return;
}
/* Driver doesn't want device back. */
ccw_device_set_notoper(cdev);
- PREPARE_WORK(&cdev->private->kick_work, ccw_device_do_unbind_bind);
- queue_work(ccw_device_work, &cdev->private->kick_work);
+ ccw_device_sched_todo(cdev, CDEV_TODO_REBIND);
}
/*
@@ -392,14 +362,14 @@
CIO_MSG_EVENT(0, "Boxed device %04x on subchannel %04x\n",
cdev->private->dev_id.devno, sch->schid.sch_no);
if (cdev->online && !ccw_device_notify(cdev, CIO_BOXED))
- ccw_device_schedule_sch_unregister(cdev);
+ ccw_device_sched_todo(cdev, CDEV_TODO_UNREG);
cdev->private->flags.donotify = 0;
break;
case DEV_STATE_NOT_OPER:
CIO_MSG_EVENT(0, "Device %04x gone on subchannel %04x\n",
cdev->private->dev_id.devno, sch->schid.sch_no);
if (!ccw_device_notify(cdev, CIO_GONE))
- ccw_device_schedule_sch_unregister(cdev);
+ ccw_device_sched_todo(cdev, CDEV_TODO_UNREG);
else
ccw_device_set_disconnected(cdev);
cdev->private->flags.donotify = 0;
@@ -409,7 +379,7 @@
"%04x\n", cdev->private->dev_id.devno,
sch->schid.sch_no);
if (!ccw_device_notify(cdev, CIO_NO_PATH))
- ccw_device_schedule_sch_unregister(cdev);
+ ccw_device_sched_todo(cdev, CDEV_TODO_UNREG);
else
ccw_device_set_disconnected(cdev);
cdev->private->flags.donotify = 0;
@@ -425,107 +395,12 @@
wake_up(&cdev->private->wait_q);
}
-static int cmp_pgid(struct pgid *p1, struct pgid *p2)
-{
- char *c1;
- char *c2;
-
- c1 = (char *)p1;
- c2 = (char *)p2;
-
- return memcmp(c1 + 1, c2 + 1, sizeof(struct pgid) - 1);
-}
-
-static void __ccw_device_get_common_pgid(struct ccw_device *cdev)
-{
- int i;
- int last;
-
- last = 0;
- for (i = 0; i < 8; i++) {
- if (cdev->private->pgid[i].inf.ps.state1 == SNID_STATE1_RESET)
- /* No PGID yet */
- continue;
- if (cdev->private->pgid[last].inf.ps.state1 ==
- SNID_STATE1_RESET) {
- /* First non-zero PGID */
- last = i;
- continue;
- }
- if (cmp_pgid(&cdev->private->pgid[i],
- &cdev->private->pgid[last]) == 0)
- /* Non-conflicting PGIDs */
- continue;
-
- /* PGID mismatch, can't pathgroup. */
- CIO_MSG_EVENT(0, "SNID - pgid mismatch for device "
- "0.%x.%04x, can't pathgroup\n",
- cdev->private->dev_id.ssid,
- cdev->private->dev_id.devno);
- cdev->private->options.pgroup = 0;
- return;
- }
- if (cdev->private->pgid[last].inf.ps.state1 ==
- SNID_STATE1_RESET)
- /* No previous pgid found */
- memcpy(&cdev->private->pgid[0],
- &channel_subsystems[0]->global_pgid,
- sizeof(struct pgid));
- else
- /* Use existing pgid */
- memcpy(&cdev->private->pgid[0], &cdev->private->pgid[last],
- sizeof(struct pgid));
-}
-
-/*
- * Function called from device_pgid.c after sense path ground has completed.
- */
-void
-ccw_device_sense_pgid_done(struct ccw_device *cdev, int err)
-{
- struct subchannel *sch;
-
- sch = to_subchannel(cdev->dev.parent);
- switch (err) {
- case -EOPNOTSUPP: /* path grouping not supported, use nop instead. */
- cdev->private->options.pgroup = 0;
- break;
- case 0: /* success */
- case -EACCES: /* partial success, some paths not operational */
- /* Check if all pgids are equal or 0. */
- __ccw_device_get_common_pgid(cdev);
- break;
- case -ETIME: /* Sense path group id stopped by timeout. */
- case -EUSERS: /* device is reserved for someone else. */
- ccw_device_done(cdev, DEV_STATE_BOXED);
- return;
- default:
- ccw_device_done(cdev, DEV_STATE_NOT_OPER);
- return;
- }
- /* Start Path Group verification. */
- cdev->private->state = DEV_STATE_VERIFY;
- cdev->private->flags.doverify = 0;
- ccw_device_verify_start(cdev);
-}
-
/*
* Start device recognition.
*/
-int
-ccw_device_recognition(struct ccw_device *cdev)
+void ccw_device_recognition(struct ccw_device *cdev)
{
- struct subchannel *sch;
- int ret;
-
- sch = to_subchannel(cdev->dev.parent);
- ret = cio_enable_subchannel(sch, (u32)(addr_t)sch);
- if (ret != 0)
- /* Couldn't enable the subchannel for i/o. Sick device. */
- return ret;
-
- /* After 60s the device recognition is considered to have failed. */
- ccw_device_set_timeout(cdev, 60*HZ);
+ struct subchannel *sch = to_subchannel(cdev->dev.parent);
/*
* We used to start here with a sense pgid to find out whether a device
@@ -537,32 +412,33 @@
*/
cdev->private->flags.recog_done = 0;
cdev->private->state = DEV_STATE_SENSE_ID;
+ if (cio_enable_subchannel(sch, (u32) (addr_t) sch)) {
+ ccw_device_recog_done(cdev, DEV_STATE_NOT_OPER);
+ return;
+ }
ccw_device_sense_id_start(cdev);
- return 0;
}
/*
- * Handle timeout in device recognition.
+ * Handle events for states that use the ccw request infrastructure.
*/
-static void
-ccw_device_recog_timeout(struct ccw_device *cdev, enum dev_event dev_event)
+static void ccw_device_request_event(struct ccw_device *cdev, enum dev_event e)
{
- int ret;
-
- ret = ccw_device_cancel_halt_clear(cdev);
- switch (ret) {
- case 0:
- ccw_device_recog_done(cdev, DEV_STATE_BOXED);
+ switch (e) {
+ case DEV_EVENT_NOTOPER:
+ ccw_request_notoper(cdev);
break;
- case -ENODEV:
- ccw_device_recog_done(cdev, DEV_STATE_NOT_OPER);
+ case DEV_EVENT_INTERRUPT:
+ ccw_request_handler(cdev);
+ break;
+ case DEV_EVENT_TIMEOUT:
+ ccw_request_timeout(cdev);
break;
default:
- ccw_device_set_timeout(cdev, 3*HZ);
+ break;
}
}
-
void
ccw_device_verify_done(struct ccw_device *cdev, int err)
{
@@ -571,21 +447,18 @@
sch = to_subchannel(cdev->dev.parent);
/* Update schib - pom may have changed. */
if (cio_update_schib(sch)) {
- cdev->private->flags.donotify = 0;
- ccw_device_done(cdev, DEV_STATE_NOT_OPER);
- return;
+ err = -ENODEV;
+ goto callback;
}
/* Update lpm with verified path mask. */
sch->lpm = sch->vpm;
/* Repeat path verification? */
if (cdev->private->flags.doverify) {
- cdev->private->flags.doverify = 0;
ccw_device_verify_start(cdev);
return;
}
+callback:
switch (err) {
- case -EOPNOTSUPP: /* path grouping not supported, just set online. */
- cdev->private->options.pgroup = 0;
case 0:
ccw_device_done(cdev, DEV_STATE_ONLINE);
/* Deliver fake irb to device driver, if needed. */
@@ -604,18 +477,20 @@
}
break;
case -ETIME:
+ case -EUSERS:
/* Reset oper notify indication after verify error. */
cdev->private->flags.donotify = 0;
ccw_device_done(cdev, DEV_STATE_BOXED);
break;
+ case -EACCES:
+ /* Reset oper notify indication after verify error. */
+ cdev->private->flags.donotify = 0;
+ ccw_device_done(cdev, DEV_STATE_DISCONNECTED);
+ break;
default:
/* Reset oper notify indication after verify error. */
cdev->private->flags.donotify = 0;
- if (cdev->online) {
- ccw_device_set_timeout(cdev, 0);
- dev_fsm_event(cdev, DEV_EVENT_NOTOPER);
- } else
- ccw_device_done(cdev, DEV_STATE_NOT_OPER);
+ ccw_device_done(cdev, DEV_STATE_NOT_OPER);
break;
}
}
@@ -640,17 +515,9 @@
dev_fsm_event(cdev, DEV_EVENT_NOTOPER);
return ret;
}
- /* Do we want to do path grouping? */
- if (!cdev->private->options.pgroup) {
- /* Start initial path verification. */
- cdev->private->state = DEV_STATE_VERIFY;
- cdev->private->flags.doverify = 0;
- ccw_device_verify_start(cdev);
- return 0;
- }
- /* Do a SensePGID first. */
- cdev->private->state = DEV_STATE_SENSE_PGID;
- ccw_device_sense_pgid_start(cdev);
+ /* Start initial path verification. */
+ cdev->private->state = DEV_STATE_VERIFY;
+ ccw_device_verify_start(cdev);
return 0;
}
@@ -666,7 +533,6 @@
break;
default:
cdev->private->flags.donotify = 0;
- dev_fsm_event(cdev, DEV_EVENT_NOTOPER);
ccw_device_done(cdev, DEV_STATE_NOT_OPER);
break;
}
@@ -703,7 +569,7 @@
if (cdev->private->state != DEV_STATE_ONLINE)
return -EINVAL;
/* Are we doing path grouping? */
- if (!cdev->private->options.pgroup) {
+ if (!cdev->private->flags.pgroup) {
/* No, set state offline immediately. */
ccw_device_done(cdev, DEV_STATE_OFFLINE);
return 0;
@@ -715,43 +581,13 @@
}
/*
- * Handle timeout in device online/offline process.
- */
-static void
-ccw_device_onoff_timeout(struct ccw_device *cdev, enum dev_event dev_event)
-{
- int ret;
-
- ret = ccw_device_cancel_halt_clear(cdev);
- switch (ret) {
- case 0:
- ccw_device_done(cdev, DEV_STATE_BOXED);
- break;
- case -ENODEV:
- ccw_device_done(cdev, DEV_STATE_NOT_OPER);
- break;
- default:
- ccw_device_set_timeout(cdev, 3*HZ);
- }
-}
-
-/*
- * Handle not oper event in device recognition.
- */
-static void
-ccw_device_recog_notoper(struct ccw_device *cdev, enum dev_event dev_event)
-{
- ccw_device_recog_done(cdev, DEV_STATE_NOT_OPER);
-}
-
-/*
* Handle not operational event in non-special state.
*/
static void ccw_device_generic_notoper(struct ccw_device *cdev,
enum dev_event dev_event)
{
if (!ccw_device_notify(cdev, CIO_GONE))
- ccw_device_schedule_sch_unregister(cdev);
+ ccw_device_sched_todo(cdev, CDEV_TODO_UNREG);
else
ccw_device_set_disconnected(cdev);
}
@@ -802,11 +638,27 @@
}
/* Device is idle, we can do the path verification. */
cdev->private->state = DEV_STATE_VERIFY;
- cdev->private->flags.doverify = 0;
ccw_device_verify_start(cdev);
}
/*
+ * Handle path verification event in boxed state.
+ */
+static void ccw_device_boxed_verify(struct ccw_device *cdev,
+ enum dev_event dev_event)
+{
+ struct subchannel *sch = to_subchannel(cdev->dev.parent);
+
+ if (cdev->online) {
+ if (cio_enable_subchannel(sch, (u32) (addr_t) sch))
+ ccw_device_done(cdev, DEV_STATE_NOT_OPER);
+ else
+ ccw_device_online_verify(cdev, dev_event);
+ } else
+ css_schedule_eval(sch->schid);
+}
+
+/*
* Got an interrupt for a normal io (state online).
*/
static void
@@ -904,12 +756,6 @@
*/
if (scsw_fctl(&irb->scsw) &
(SCSW_FCTL_CLEAR_FUNC | SCSW_FCTL_HALT_FUNC)) {
- /* Retry Basic Sense if requested. */
- if (cdev->private->flags.intretry) {
- cdev->private->flags.intretry = 0;
- ccw_device_do_sense(cdev, irb);
- return;
- }
cdev->private->flags.dosense = 0;
memset(&cdev->private->irb, 0, sizeof(struct irb));
ccw_device_accumulate_irb(cdev, irb);
@@ -933,21 +779,6 @@
}
static void
-ccw_device_clear_verify(struct ccw_device *cdev, enum dev_event dev_event)
-{
- struct irb *irb;
-
- irb = (struct irb *) __LC_IRB;
- /* Accumulate status. We don't do basic sense. */
- ccw_device_accumulate_irb(cdev, irb);
- /* Remember to clear irb to avoid residuals. */
- memset(&cdev->private->irb, 0, sizeof(struct irb));
- /* Try to start delayed device verification. */
- ccw_device_online_verify(cdev, 0);
- /* Note: Don't call handler for cio initiated clear! */
-}
-
-static void
ccw_device_killing_irq(struct ccw_device *cdev, enum dev_event dev_event)
{
struct subchannel *sch;
@@ -1004,32 +835,6 @@
}
static void
-ccw_device_stlck_done(struct ccw_device *cdev, enum dev_event dev_event)
-{
- struct irb *irb;
-
- switch (dev_event) {
- case DEV_EVENT_INTERRUPT:
- irb = (struct irb *) __LC_IRB;
- /* Check for unsolicited interrupt. */
- if ((scsw_stctl(&irb->scsw) ==
- (SCSW_STCTL_STATUS_PEND | SCSW_STCTL_ALERT_STATUS)) &&
- (!scsw_cc(&irb->scsw)))
- /* FIXME: we should restart stlck here, but this
- * is extremely unlikely ... */
- goto out_wakeup;
-
- ccw_device_accumulate_irb(cdev, irb);
- /* We don't care about basic sense etc. */
- break;
- default: /* timeout */
- break;
- }
-out_wakeup:
- wake_up(&cdev->private->wait_q);
-}
-
-static void
ccw_device_start_id(struct ccw_device *cdev, enum dev_event dev_event)
{
struct subchannel *sch;
@@ -1038,10 +843,6 @@
if (cio_enable_subchannel(sch, (u32)(addr_t)sch) != 0)
/* Couldn't enable the subchannel for i/o. Sick device. */
return;
-
- /* After 60s the device recognition is considered to have failed. */
- ccw_device_set_timeout(cdev, 60*HZ);
-
cdev->private->state = DEV_STATE_DISCONNECTED_SENSE_ID;
ccw_device_sense_id_start(cdev);
}
@@ -1072,22 +873,20 @@
/* We should also udate ssd info, but this has to wait. */
/* Check if this is another device which appeared on the same sch. */
- if (sch->schib.pmcw.dev != cdev->private->dev_id.devno) {
- PREPARE_WORK(&cdev->private->kick_work,
- ccw_device_move_to_orphanage);
- queue_work(slow_path_wq, &cdev->private->kick_work);
- } else
+ if (sch->schib.pmcw.dev != cdev->private->dev_id.devno)
+ css_schedule_eval(sch->schid);
+ else
ccw_device_start_id(cdev, 0);
}
-static void
-ccw_device_offline_irq(struct ccw_device *cdev, enum dev_event dev_event)
+static void ccw_device_disabled_irq(struct ccw_device *cdev,
+ enum dev_event dev_event)
{
struct subchannel *sch;
sch = to_subchannel(cdev->dev.parent);
/*
- * An interrupt in state offline means a previous disable was not
+ * An interrupt in a disabled state means a previous disable was not
* successful - should not happen, but we try to disable again.
*/
cio_disable_subchannel(sch);
@@ -1113,10 +912,7 @@
ccw_device_quiesce_done(struct ccw_device *cdev, enum dev_event dev_event)
{
ccw_device_set_timeout(cdev, 0);
- if (dev_event == DEV_EVENT_NOTOPER)
- cdev->private->state = DEV_STATE_NOT_OPER;
- else
- cdev->private->state = DEV_STATE_OFFLINE;
+ cdev->private->state = DEV_STATE_NOT_OPER;
wake_up(&cdev->private->wait_q);
}
@@ -1126,17 +922,11 @@
int ret;
ret = ccw_device_cancel_halt_clear(cdev);
- switch (ret) {
- case 0:
- cdev->private->state = DEV_STATE_OFFLINE;
- wake_up(&cdev->private->wait_q);
- break;
- case -ENODEV:
+ if (ret == -EBUSY) {
+ ccw_device_set_timeout(cdev, HZ/10);
+ } else {
cdev->private->state = DEV_STATE_NOT_OPER;
wake_up(&cdev->private->wait_q);
- break;
- default:
- ccw_device_set_timeout(cdev, HZ/10);
}
}
@@ -1150,50 +940,37 @@
}
/*
- * Bug operation action.
- */
-static void
-ccw_device_bug(struct ccw_device *cdev, enum dev_event dev_event)
-{
- CIO_MSG_EVENT(0, "Internal state [%i][%i] not handled for device "
- "0.%x.%04x\n", cdev->private->state, dev_event,
- cdev->private->dev_id.ssid,
- cdev->private->dev_id.devno);
- BUG();
-}
-
-/*
* device statemachine
*/
fsm_func_t *dev_jumptable[NR_DEV_STATES][NR_DEV_EVENTS] = {
[DEV_STATE_NOT_OPER] = {
[DEV_EVENT_NOTOPER] = ccw_device_nop,
- [DEV_EVENT_INTERRUPT] = ccw_device_bug,
+ [DEV_EVENT_INTERRUPT] = ccw_device_disabled_irq,
[DEV_EVENT_TIMEOUT] = ccw_device_nop,
[DEV_EVENT_VERIFY] = ccw_device_nop,
},
[DEV_STATE_SENSE_PGID] = {
- [DEV_EVENT_NOTOPER] = ccw_device_generic_notoper,
- [DEV_EVENT_INTERRUPT] = ccw_device_sense_pgid_irq,
- [DEV_EVENT_TIMEOUT] = ccw_device_onoff_timeout,
+ [DEV_EVENT_NOTOPER] = ccw_device_request_event,
+ [DEV_EVENT_INTERRUPT] = ccw_device_request_event,
+ [DEV_EVENT_TIMEOUT] = ccw_device_request_event,
[DEV_EVENT_VERIFY] = ccw_device_nop,
},
[DEV_STATE_SENSE_ID] = {
- [DEV_EVENT_NOTOPER] = ccw_device_recog_notoper,
- [DEV_EVENT_INTERRUPT] = ccw_device_sense_id_irq,
- [DEV_EVENT_TIMEOUT] = ccw_device_recog_timeout,
+ [DEV_EVENT_NOTOPER] = ccw_device_request_event,
+ [DEV_EVENT_INTERRUPT] = ccw_device_request_event,
+ [DEV_EVENT_TIMEOUT] = ccw_device_request_event,
[DEV_EVENT_VERIFY] = ccw_device_nop,
},
[DEV_STATE_OFFLINE] = {
[DEV_EVENT_NOTOPER] = ccw_device_generic_notoper,
- [DEV_EVENT_INTERRUPT] = ccw_device_offline_irq,
+ [DEV_EVENT_INTERRUPT] = ccw_device_disabled_irq,
[DEV_EVENT_TIMEOUT] = ccw_device_nop,
[DEV_EVENT_VERIFY] = ccw_device_offline_verify,
},
[DEV_STATE_VERIFY] = {
- [DEV_EVENT_NOTOPER] = ccw_device_generic_notoper,
- [DEV_EVENT_INTERRUPT] = ccw_device_verify_irq,
- [DEV_EVENT_TIMEOUT] = ccw_device_onoff_timeout,
+ [DEV_EVENT_NOTOPER] = ccw_device_request_event,
+ [DEV_EVENT_INTERRUPT] = ccw_device_request_event,
+ [DEV_EVENT_TIMEOUT] = ccw_device_request_event,
[DEV_EVENT_VERIFY] = ccw_device_delay_verify,
},
[DEV_STATE_ONLINE] = {
@@ -1209,24 +986,18 @@
[DEV_EVENT_VERIFY] = ccw_device_online_verify,
},
[DEV_STATE_DISBAND_PGID] = {
- [DEV_EVENT_NOTOPER] = ccw_device_generic_notoper,
- [DEV_EVENT_INTERRUPT] = ccw_device_disband_irq,
- [DEV_EVENT_TIMEOUT] = ccw_device_onoff_timeout,
+ [DEV_EVENT_NOTOPER] = ccw_device_request_event,
+ [DEV_EVENT_INTERRUPT] = ccw_device_request_event,
+ [DEV_EVENT_TIMEOUT] = ccw_device_request_event,
[DEV_EVENT_VERIFY] = ccw_device_nop,
},
[DEV_STATE_BOXED] = {
[DEV_EVENT_NOTOPER] = ccw_device_generic_notoper,
- [DEV_EVENT_INTERRUPT] = ccw_device_stlck_done,
- [DEV_EVENT_TIMEOUT] = ccw_device_stlck_done,
- [DEV_EVENT_VERIFY] = ccw_device_nop,
+ [DEV_EVENT_INTERRUPT] = ccw_device_nop,
+ [DEV_EVENT_TIMEOUT] = ccw_device_nop,
+ [DEV_EVENT_VERIFY] = ccw_device_boxed_verify,
},
/* states to wait for i/o completion before doing something */
- [DEV_STATE_CLEAR_VERIFY] = {
- [DEV_EVENT_NOTOPER] = ccw_device_generic_notoper,
- [DEV_EVENT_INTERRUPT] = ccw_device_clear_verify,
- [DEV_EVENT_TIMEOUT] = ccw_device_nop,
- [DEV_EVENT_VERIFY] = ccw_device_nop,
- },
[DEV_STATE_TIMEOUT_KILL] = {
[DEV_EVENT_NOTOPER] = ccw_device_generic_notoper,
[DEV_EVENT_INTERRUPT] = ccw_device_killing_irq,
@@ -1243,13 +1014,13 @@
[DEV_STATE_DISCONNECTED] = {
[DEV_EVENT_NOTOPER] = ccw_device_nop,
[DEV_EVENT_INTERRUPT] = ccw_device_start_id,
- [DEV_EVENT_TIMEOUT] = ccw_device_bug,
+ [DEV_EVENT_TIMEOUT] = ccw_device_nop,
[DEV_EVENT_VERIFY] = ccw_device_start_id,
},
[DEV_STATE_DISCONNECTED_SENSE_ID] = {
- [DEV_EVENT_NOTOPER] = ccw_device_recog_notoper,
- [DEV_EVENT_INTERRUPT] = ccw_device_sense_id_irq,
- [DEV_EVENT_TIMEOUT] = ccw_device_recog_timeout,
+ [DEV_EVENT_NOTOPER] = ccw_device_request_event,
+ [DEV_EVENT_INTERRUPT] = ccw_device_request_event,
+ [DEV_EVENT_TIMEOUT] = ccw_device_request_event,
[DEV_EVENT_VERIFY] = ccw_device_nop,
},
[DEV_STATE_CMFCHANGE] = {
@@ -1264,6 +1035,12 @@
[DEV_EVENT_TIMEOUT] = ccw_device_update_cmfblock,
[DEV_EVENT_VERIFY] = ccw_device_update_cmfblock,
},
+ [DEV_STATE_STEAL_LOCK] = {
+ [DEV_EVENT_NOTOPER] = ccw_device_request_event,
+ [DEV_EVENT_INTERRUPT] = ccw_device_request_event,
+ [DEV_EVENT_TIMEOUT] = ccw_device_request_event,
+ [DEV_EVENT_VERIFY] = ccw_device_nop,
+ },
};
EXPORT_SYMBOL_GPL(ccw_device_set_timeout);
diff --git a/drivers/s390/cio/device_id.c b/drivers/s390/cio/device_id.c
index 1bdaa61..78a0b43 100644
--- a/drivers/s390/cio/device_id.c
+++ b/drivers/s390/cio/device_id.c
@@ -1,40 +1,39 @@
/*
- * drivers/s390/cio/device_id.c
+ * CCW device SENSE ID I/O handling.
*
- * Copyright (C) 2002 IBM Deutschland Entwicklung GmbH,
- * IBM Corporation
- * Author(s): Cornelia Huck (cornelia.huck@de.ibm.com)
- * Martin Schwidefsky (schwidefsky@de.ibm.com)
- *
- * Sense ID functions.
+ * Copyright IBM Corp. 2002,2009
+ * Author(s): Cornelia Huck <cornelia.huck@de.ibm.com>
+ * Martin Schwidefsky <schwidefsky@de.ibm.com>
+ * Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
*/
-#include <linux/module.h>
-#include <linux/init.h>
#include <linux/kernel.h>
-
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/errno.h>
#include <asm/ccwdev.h>
-#include <asm/delay.h>
+#include <asm/setup.h>
#include <asm/cio.h>
-#include <asm/lowcore.h>
#include <asm/diag.h>
#include "cio.h"
#include "cio_debug.h"
-#include "css.h"
#include "device.h"
-#include "ioasm.h"
#include "io_sch.h"
+#define SENSE_ID_RETRIES 256
+#define SENSE_ID_TIMEOUT (10 * HZ)
+#define SENSE_ID_MIN_LEN 4
+#define SENSE_ID_BASIC_LEN 7
+
/**
- * vm_vdev_to_cu_type - Convert vm virtual device into control unit type
- * for certain devices.
- * @class: virtual device class
- * @type: virtual device type
+ * diag210_to_senseid - convert diag 0x210 data to sense id information
+ * @senseid: sense id
+ * @diag: diag 0x210 data
*
- * Returns control unit type if a match was made or %0xffff otherwise.
+ * Return 0 on success, non-zero otherwise.
*/
-static int vm_vdev_to_cu_type(int class, int type)
+static int diag210_to_senseid(struct senseid *senseid, struct diag210 *diag)
{
static struct {
int class, type, cu_type;
@@ -71,253 +70,153 @@
};
int i;
- for (i = 0; i < ARRAY_SIZE(vm_devices); i++)
- if (class == vm_devices[i].class && type == vm_devices[i].type)
- return vm_devices[i].cu_type;
-
- return 0xffff;
-}
-
-/**
- * diag_get_dev_info - retrieve device information via DIAG X'210'
- * @devno: device number
- * @ps: pointer to sense ID data area
- *
- * Returns zero on success, non-zero otherwise.
- */
-static int diag_get_dev_info(u16 devno, struct senseid *ps)
-{
- struct diag210 diag_data;
- int ccode;
-
- CIO_TRACE_EVENT (4, "VMvdinf");
-
- diag_data = (struct diag210) {
- .vrdcdvno = devno,
- .vrdclen = sizeof (diag_data),
- };
-
- ccode = diag210 (&diag_data);
- if ((ccode == 0) || (ccode == 2)) {
- ps->reserved = 0xff;
-
- /* Special case for osa devices. */
- if (diag_data.vrdcvcla == 0x02 && diag_data.vrdcvtyp == 0x20) {
- ps->cu_type = 0x3088;
- ps->cu_model = 0x60;
+ /* Special case for osa devices. */
+ if (diag->vrdcvcla == 0x02 && diag->vrdcvtyp == 0x20) {
+ senseid->cu_type = 0x3088;
+ senseid->cu_model = 0x60;
+ senseid->reserved = 0xff;
+ return 0;
+ }
+ for (i = 0; i < ARRAY_SIZE(vm_devices); i++) {
+ if (diag->vrdcvcla == vm_devices[i].class &&
+ diag->vrdcvtyp == vm_devices[i].type) {
+ senseid->cu_type = vm_devices[i].cu_type;
+ senseid->reserved = 0xff;
return 0;
}
- ps->cu_type = vm_vdev_to_cu_type(diag_data.vrdcvcla,
- diag_data.vrdcvtyp);
- if (ps->cu_type != 0xffff)
- return 0;
}
- CIO_MSG_EVENT(0, "DIAG X'210' for device %04X returned (cc = %d):"
- "vdev class : %02X, vdev type : %04X \n ... "
- "rdev class : %02X, rdev type : %04X, "
- "rdev model: %02X\n",
- devno, ccode,
- diag_data.vrdcvcla, diag_data.vrdcvtyp,
- diag_data.vrdcrccl, diag_data.vrdccrty,
- diag_data.vrdccrmd);
-
return -ENODEV;
}
-/*
- * Start Sense ID helper function.
- * Try to obtain the 'control unit'/'device type' information
- * associated with the subchannel.
+/**
+ * diag_get_dev_info - retrieve device information via diag 0x210
+ * @cdev: ccw device
+ *
+ * Returns zero on success, non-zero otherwise.
*/
-static int
-__ccw_device_sense_id_start(struct ccw_device *cdev)
+static int diag210_get_dev_info(struct ccw_device *cdev)
{
- struct subchannel *sch;
- struct ccw1 *ccw;
- int ret;
+ struct ccw_dev_id *dev_id = &cdev->private->dev_id;
+ struct senseid *senseid = &cdev->private->senseid;
+ struct diag210 diag_data;
+ int rc;
- sch = to_subchannel(cdev->dev.parent);
- /* Setup sense channel program. */
- ccw = cdev->private->iccws;
- ccw->cmd_code = CCW_CMD_SENSE_ID;
- ccw->cda = (__u32) __pa (&cdev->private->senseid);
- ccw->count = sizeof (struct senseid);
- ccw->flags = CCW_FLAG_SLI;
+ if (dev_id->ssid != 0)
+ return -ENODEV;
+ memset(&diag_data, 0, sizeof(diag_data));
+ diag_data.vrdcdvno = dev_id->devno;
+ diag_data.vrdclen = sizeof(diag_data);
+ rc = diag210(&diag_data);
+ CIO_TRACE_EVENT(4, "diag210");
+ CIO_HEX_EVENT(4, &rc, sizeof(rc));
+ CIO_HEX_EVENT(4, &diag_data, sizeof(diag_data));
+ if (rc != 0 && rc != 2)
+ goto err_failed;
+ if (diag210_to_senseid(senseid, &diag_data))
+ goto err_unknown;
+ return 0;
- /* Reset device status. */
- memset(&cdev->private->irb, 0, sizeof(struct irb));
-
- /* Try on every path. */
- ret = -ENODEV;
- while (cdev->private->imask != 0) {
- cdev->private->senseid.cu_type = 0xFFFF;
- if ((sch->opm & cdev->private->imask) != 0 &&
- cdev->private->iretry > 0) {
- cdev->private->iretry--;
- /* Reset internal retry indication. */
- cdev->private->flags.intretry = 0;
- ret = cio_start (sch, cdev->private->iccws,
- cdev->private->imask);
- /* ret is 0, -EBUSY, -EACCES or -ENODEV */
- if (ret != -EACCES)
- return ret;
- }
- cdev->private->imask >>= 1;
- cdev->private->iretry = 5;
- }
- return ret;
-}
-
-void
-ccw_device_sense_id_start(struct ccw_device *cdev)
-{
- int ret;
-
- memset (&cdev->private->senseid, 0, sizeof (struct senseid));
- cdev->private->imask = 0x80;
- cdev->private->iretry = 5;
- ret = __ccw_device_sense_id_start(cdev);
- if (ret && ret != -EBUSY)
- ccw_device_sense_id_done(cdev, ret);
+err_unknown:
+ CIO_MSG_EVENT(0, "snsid: device 0.%x.%04x: unknown diag210 data\n",
+ dev_id->ssid, dev_id->devno);
+ return -ENODEV;
+err_failed:
+ CIO_MSG_EVENT(0, "snsid: device 0.%x.%04x: diag210 failed (rc=%d)\n",
+ dev_id->ssid, dev_id->devno, rc);
+ return -ENODEV;
}
/*
- * Called from interrupt context to check if a valid answer
- * to Sense ID was received.
+ * Initialize SENSE ID data.
*/
-static int
-ccw_device_check_sense_id(struct ccw_device *cdev)
+static void snsid_init(struct ccw_device *cdev)
{
- struct subchannel *sch;
- struct irb *irb;
+ cdev->private->flags.esid = 0;
+ memset(&cdev->private->senseid, 0, sizeof(cdev->private->senseid));
+ cdev->private->senseid.cu_type = 0xffff;
+}
- sch = to_subchannel(cdev->dev.parent);
- irb = &cdev->private->irb;
+/*
+ * Check for complete SENSE ID data.
+ */
+static int snsid_check(struct ccw_device *cdev, void *data)
+{
+ struct cmd_scsw *scsw = &cdev->private->irb.scsw.cmd;
+ int len = sizeof(struct senseid) - scsw->count;
- /* Check the error cases. */
- if (irb->scsw.cmd.fctl & (SCSW_FCTL_HALT_FUNC | SCSW_FCTL_CLEAR_FUNC)) {
- /* Retry Sense ID if requested. */
- if (cdev->private->flags.intretry) {
- cdev->private->flags.intretry = 0;
- return -EAGAIN;
- }
- return -ETIME;
- }
- if (irb->esw.esw0.erw.cons && (irb->ecw[0] & SNS0_CMD_REJECT)) {
- /*
- * if the device doesn't support the SenseID
- * command further retries wouldn't help ...
- * NB: We don't check here for intervention required like we
- * did before, because tape devices with no tape inserted
- * may present this status *in conjunction with* the
- * sense id information. So, for intervention required,
- * we use the "whack it until it talks" strategy...
- */
- CIO_MSG_EVENT(0, "SenseID : device %04x on Subchannel "
- "0.%x.%04x reports cmd reject\n",
- cdev->private->dev_id.devno, sch->schid.ssid,
- sch->schid.sch_no);
+ /* Check for incomplete SENSE ID data. */
+ if (len < SENSE_ID_MIN_LEN)
+ goto out_restart;
+ if (cdev->private->senseid.cu_type == 0xffff)
+ goto out_restart;
+ /* Check for incompatible SENSE ID data. */
+ if (cdev->private->senseid.reserved != 0xff)
return -EOPNOTSUPP;
- }
- if (irb->esw.esw0.erw.cons) {
- CIO_MSG_EVENT(2, "SenseID : UC on dev 0.%x.%04x, "
- "lpum %02X, cnt %02d, sns :"
- " %02X%02X%02X%02X %02X%02X%02X%02X ...\n",
- cdev->private->dev_id.ssid,
- cdev->private->dev_id.devno,
- irb->esw.esw0.sublog.lpum,
- irb->esw.esw0.erw.scnt,
- irb->ecw[0], irb->ecw[1],
- irb->ecw[2], irb->ecw[3],
- irb->ecw[4], irb->ecw[5],
- irb->ecw[6], irb->ecw[7]);
- return -EAGAIN;
- }
- if (irb->scsw.cmd.cc == 3) {
- u8 lpm;
+ /* Check for extended-identification information. */
+ if (len > SENSE_ID_BASIC_LEN)
+ cdev->private->flags.esid = 1;
+ return 0;
- lpm = to_io_private(sch)->orb.cmd.lpm;
- if ((lpm & sch->schib.pmcw.pim & sch->schib.pmcw.pam) != 0)
- CIO_MSG_EVENT(4, "SenseID : path %02X for device %04x "
- "on subchannel 0.%x.%04x is "
- "'not operational'\n", lpm,
- cdev->private->dev_id.devno,
- sch->schid.ssid, sch->schid.sch_no);
- return -EACCES;
- }
-
- /* Did we get a proper answer ? */
- if (irb->scsw.cmd.cc == 0 && cdev->private->senseid.cu_type != 0xFFFF &&
- cdev->private->senseid.reserved == 0xFF) {
- if (irb->scsw.cmd.count < sizeof(struct senseid) - 8)
- cdev->private->flags.esid = 1;
- return 0; /* Success */
- }
-
- /* Hmm, whatever happened, try again. */
- CIO_MSG_EVENT(2, "SenseID : start_IO() for device %04x on "
- "subchannel 0.%x.%04x returns status %02X%02X\n",
- cdev->private->dev_id.devno, sch->schid.ssid,
- sch->schid.sch_no,
- irb->scsw.cmd.dstat, irb->scsw.cmd.cstat);
+out_restart:
+ snsid_init(cdev);
return -EAGAIN;
}
/*
- * Got interrupt for Sense ID.
+ * Process SENSE ID request result.
*/
-void
-ccw_device_sense_id_irq(struct ccw_device *cdev, enum dev_event dev_event)
+static void snsid_callback(struct ccw_device *cdev, void *data, int rc)
{
- struct subchannel *sch;
- struct irb *irb;
- int ret;
+ struct ccw_dev_id *id = &cdev->private->dev_id;
+ struct senseid *senseid = &cdev->private->senseid;
+ int vm = 0;
- sch = to_subchannel(cdev->dev.parent);
- irb = (struct irb *) __LC_IRB;
- /* Retry sense id, if needed. */
- if (irb->scsw.cmd.stctl ==
- (SCSW_STCTL_STATUS_PEND | SCSW_STCTL_ALERT_STATUS)) {
- if ((irb->scsw.cmd.cc == 1) || !irb->scsw.cmd.actl) {
- ret = __ccw_device_sense_id_start(cdev);
- if (ret && ret != -EBUSY)
- ccw_device_sense_id_done(cdev, ret);
+ if (rc && MACHINE_IS_VM) {
+ /* Try diag 0x210 fallback on z/VM. */
+ snsid_init(cdev);
+ if (diag210_get_dev_info(cdev) == 0) {
+ rc = 0;
+ vm = 1;
}
- return;
}
- if (ccw_device_accumulate_and_sense(cdev, irb) != 0)
- return;
- ret = ccw_device_check_sense_id(cdev);
- memset(&cdev->private->irb, 0, sizeof(struct irb));
- switch (ret) {
- /* 0, -ETIME, -EOPNOTSUPP, -EAGAIN or -EACCES */
- case 0: /* Sense id succeeded. */
- case -ETIME: /* Sense id stopped by timeout. */
- ccw_device_sense_id_done(cdev, ret);
- break;
- case -EACCES: /* channel is not operational. */
- sch->lpm &= ~cdev->private->imask;
- cdev->private->imask >>= 1;
- cdev->private->iretry = 5;
- /* fall through. */
- case -EAGAIN: /* try again. */
- ret = __ccw_device_sense_id_start(cdev);
- if (ret == 0 || ret == -EBUSY)
- break;
- /* fall through. */
- default: /* Sense ID failed. Try asking VM. */
- if (MACHINE_IS_VM)
- ret = diag_get_dev_info(cdev->private->dev_id.devno,
- &cdev->private->senseid);
- else
- /*
- * If we can't couldn't identify the device type we
- * consider the device "not operational".
- */
- ret = -ENODEV;
+ CIO_MSG_EVENT(2, "snsid: device 0.%x.%04x: rc=%d %04x/%02x "
+ "%04x/%02x%s\n", id->ssid, id->devno, rc,
+ senseid->cu_type, senseid->cu_model, senseid->dev_type,
+ senseid->dev_model, vm ? " (diag210)" : "");
+ ccw_device_sense_id_done(cdev, rc);
+}
- ccw_device_sense_id_done(cdev, ret);
- break;
- }
+/**
+ * ccw_device_sense_id_start - perform SENSE ID
+ * @cdev: ccw device
+ *
+ * Execute a SENSE ID channel program on @cdev to update its sense id
+ * information. When finished, call ccw_device_sense_id_done with a
+ * return code specifying the result.
+ */
+void ccw_device_sense_id_start(struct ccw_device *cdev)
+{
+ struct subchannel *sch = to_subchannel(cdev->dev.parent);
+ struct ccw_request *req = &cdev->private->req;
+ struct ccw1 *cp = cdev->private->iccws;
+
+ CIO_TRACE_EVENT(4, "snsid");
+ CIO_HEX_EVENT(4, &cdev->private->dev_id, sizeof(cdev->private->dev_id));
+ /* Data setup. */
+ snsid_init(cdev);
+ /* Channel program setup. */
+ cp->cmd_code = CCW_CMD_SENSE_ID;
+ cp->cda = (u32) (addr_t) &cdev->private->senseid;
+ cp->count = sizeof(struct senseid);
+ cp->flags = CCW_FLAG_SLI;
+ /* Request setup. */
+ memset(req, 0, sizeof(*req));
+ req->cp = cp;
+ req->timeout = SENSE_ID_TIMEOUT;
+ req->maxretries = SENSE_ID_RETRIES;
+ req->lpm = sch->schib.pmcw.pam & sch->opm;
+ req->check = snsid_check;
+ req->callback = snsid_callback;
+ ccw_request_start(cdev);
}
diff --git a/drivers/s390/cio/device_ops.c b/drivers/s390/cio/device_ops.c
index 2d0efee..6da8454 100644
--- a/drivers/s390/cio/device_ops.c
+++ b/drivers/s390/cio/device_ops.c
@@ -11,6 +11,7 @@
#include <linux/list.h>
#include <linux/device.h>
#include <linux/delay.h>
+#include <linux/completion.h>
#include <asm/ccwdev.h>
#include <asm/idals.h>
@@ -46,6 +47,7 @@
cdev->private->options.repall = (flags & CCWDEV_REPORT_ALL) != 0;
cdev->private->options.pgroup = (flags & CCWDEV_DO_PATHGROUP) != 0;
cdev->private->options.force = (flags & CCWDEV_ALLOW_FORCE) != 0;
+ cdev->private->options.mpath = (flags & CCWDEV_DO_MULTIPATH) != 0;
return 0;
}
@@ -74,6 +76,7 @@
cdev->private->options.repall |= (flags & CCWDEV_REPORT_ALL) != 0;
cdev->private->options.pgroup |= (flags & CCWDEV_DO_PATHGROUP) != 0;
cdev->private->options.force |= (flags & CCWDEV_ALLOW_FORCE) != 0;
+ cdev->private->options.mpath |= (flags & CCWDEV_DO_MULTIPATH) != 0;
return 0;
}
@@ -90,9 +93,34 @@
cdev->private->options.repall &= (flags & CCWDEV_REPORT_ALL) == 0;
cdev->private->options.pgroup &= (flags & CCWDEV_DO_PATHGROUP) == 0;
cdev->private->options.force &= (flags & CCWDEV_ALLOW_FORCE) == 0;
+ cdev->private->options.mpath &= (flags & CCWDEV_DO_MULTIPATH) == 0;
}
/**
+ * ccw_device_is_pathgroup - determine if paths to this device are grouped
+ * @cdev: ccw device
+ *
+ * Return non-zero if there is a path group, zero otherwise.
+ */
+int ccw_device_is_pathgroup(struct ccw_device *cdev)
+{
+ return cdev->private->flags.pgroup;
+}
+EXPORT_SYMBOL(ccw_device_is_pathgroup);
+
+/**
+ * ccw_device_is_multipath - determine if device is operating in multipath mode
+ * @cdev: ccw device
+ *
+ * Return non-zero if device is operating in multipath mode, zero otherwise.
+ */
+int ccw_device_is_multipath(struct ccw_device *cdev)
+{
+ return cdev->private->flags.mpath;
+}
+EXPORT_SYMBOL(ccw_device_is_multipath);
+
+/**
* ccw_device_clear() - terminate I/O request processing
* @cdev: target ccw device
* @intparm: interruption parameter; value is only used if no I/O is
@@ -167,8 +195,7 @@
return -EINVAL;
if (cdev->private->state == DEV_STATE_NOT_OPER)
return -ENODEV;
- if (cdev->private->state == DEV_STATE_VERIFY ||
- cdev->private->state == DEV_STATE_CLEAR_VERIFY) {
+ if (cdev->private->state == DEV_STATE_VERIFY) {
/* Remember to fake irb when finished. */
if (!cdev->private->flags.fake_irb) {
cdev->private->flags.fake_irb = 1;
@@ -478,74 +505,65 @@
return sch->lpm;
}
-/*
- * Try to break the lock on a boxed device.
- */
-int
-ccw_device_stlck(struct ccw_device *cdev)
+struct stlck_data {
+ struct completion done;
+ int rc;
+};
+
+void ccw_device_stlck_done(struct ccw_device *cdev, void *data, int rc)
{
- void *buf, *buf2;
- unsigned long flags;
- struct subchannel *sch;
- int ret;
+ struct stlck_data *sdata = data;
- if (!cdev)
- return -ENODEV;
+ sdata->rc = rc;
+ complete(&sdata->done);
+}
- if (cdev->drv && !cdev->private->options.force)
- return -EINVAL;
+/*
+ * Perform unconditional reserve + release.
+ */
+int ccw_device_stlck(struct ccw_device *cdev)
+{
+ struct subchannel *sch = to_subchannel(cdev->dev.parent);
+ struct stlck_data data;
+ u8 *buffer;
+ int rc;
- sch = to_subchannel(cdev->dev.parent);
-
- CIO_TRACE_EVENT(2, "stl lock");
- CIO_TRACE_EVENT(2, dev_name(&cdev->dev));
-
- buf = kmalloc(32*sizeof(char), GFP_DMA|GFP_KERNEL);
- if (!buf)
- return -ENOMEM;
- buf2 = kmalloc(32*sizeof(char), GFP_DMA|GFP_KERNEL);
- if (!buf2) {
- kfree(buf);
- return -ENOMEM;
+ /* Check if steal lock operation is valid for this device. */
+ if (cdev->drv) {
+ if (!cdev->private->options.force)
+ return -EINVAL;
}
- spin_lock_irqsave(sch->lock, flags);
- ret = cio_enable_subchannel(sch, (u32)(addr_t)sch);
- if (ret)
+ buffer = kzalloc(64, GFP_DMA | GFP_KERNEL);
+ if (!buffer)
+ return -ENOMEM;
+ init_completion(&data.done);
+ data.rc = -EIO;
+ spin_lock_irq(sch->lock);
+ rc = cio_enable_subchannel(sch, (u32) (addr_t) sch);
+ if (rc)
goto out_unlock;
- /*
- * Setup ccw. We chain an unconditional reserve and a release so we
- * only break the lock.
- */
- cdev->private->iccws[0].cmd_code = CCW_CMD_STLCK;
- cdev->private->iccws[0].cda = (__u32) __pa(buf);
- cdev->private->iccws[0].count = 32;
- cdev->private->iccws[0].flags = CCW_FLAG_CC;
- cdev->private->iccws[1].cmd_code = CCW_CMD_RELEASE;
- cdev->private->iccws[1].cda = (__u32) __pa(buf2);
- cdev->private->iccws[1].count = 32;
- cdev->private->iccws[1].flags = 0;
- ret = cio_start(sch, cdev->private->iccws, 0);
- if (ret) {
- cio_disable_subchannel(sch); //FIXME: return code?
- goto out_unlock;
+ /* Perform operation. */
+ cdev->private->state = DEV_STATE_STEAL_LOCK,
+ ccw_device_stlck_start(cdev, &data, &buffer[0], &buffer[32]);
+ spin_unlock_irq(sch->lock);
+ /* Wait for operation to finish. */
+ if (wait_for_completion_interruptible(&data.done)) {
+ /* Got a signal. */
+ spin_lock_irq(sch->lock);
+ ccw_request_cancel(cdev);
+ spin_unlock_irq(sch->lock);
+ wait_for_completion(&data.done);
}
- cdev->private->irb.scsw.cmd.actl |= SCSW_ACTL_START_PEND;
- spin_unlock_irqrestore(sch->lock, flags);
- wait_event(cdev->private->wait_q,
- cdev->private->irb.scsw.cmd.actl == 0);
- spin_lock_irqsave(sch->lock, flags);
- cio_disable_subchannel(sch); //FIXME: return code?
- if ((cdev->private->irb.scsw.cmd.dstat !=
- (DEV_STAT_CHN_END|DEV_STAT_DEV_END)) ||
- (cdev->private->irb.scsw.cmd.cstat != 0))
- ret = -EIO;
- /* Clear irb. */
- memset(&cdev->private->irb, 0, sizeof(struct irb));
+ rc = data.rc;
+ /* Check results. */
+ spin_lock_irq(sch->lock);
+ cio_disable_subchannel(sch);
+ cdev->private->state = DEV_STATE_BOXED;
out_unlock:
- kfree(buf);
- kfree(buf2);
- spin_unlock_irqrestore(sch->lock, flags);
- return ret;
+ spin_unlock_irq(sch->lock);
+ kfree(buffer);
+
+ return rc;
}
void *ccw_device_get_chp_desc(struct ccw_device *cdev, int chp_no)
diff --git a/drivers/s390/cio/device_pgid.c b/drivers/s390/cio/device_pgid.c
index fc5ca1d..aad188e 100644
--- a/drivers/s390/cio/device_pgid.c
+++ b/drivers/s390/cio/device_pgid.c
@@ -1,594 +1,561 @@
/*
- * drivers/s390/cio/device_pgid.c
+ * CCW device PGID and path verification I/O handling.
*
- * Copyright (C) 2002 IBM Deutschland Entwicklung GmbH,
- * IBM Corporation
- * Author(s): Cornelia Huck (cornelia.huck@de.ibm.com)
- * Martin Schwidefsky (schwidefsky@de.ibm.com)
- *
- * Path Group ID functions.
+ * Copyright IBM Corp. 2002,2009
+ * Author(s): Cornelia Huck <cornelia.huck@de.ibm.com>
+ * Martin Schwidefsky <schwidefsky@de.ibm.com>
+ * Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
*/
-#include <linux/module.h>
-#include <linux/init.h>
-
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/bitops.h>
#include <asm/ccwdev.h>
#include <asm/cio.h>
-#include <asm/delay.h>
-#include <asm/lowcore.h>
#include "cio.h"
#include "cio_debug.h"
-#include "css.h"
#include "device.h"
-#include "ioasm.h"
#include "io_sch.h"
-/*
- * Helper function called from interrupt context to decide whether an
- * operation should be tried again.
- */
-static int __ccw_device_should_retry(union scsw *scsw)
-{
- /* CC is only valid if start function bit is set. */
- if ((scsw->cmd.fctl & SCSW_FCTL_START_FUNC) && scsw->cmd.cc == 1)
- return 1;
- /* No more activity. For sense and set PGID we stubbornly try again. */
- if (!scsw->cmd.actl)
- return 1;
- return 0;
-}
+#define PGID_RETRIES 256
+#define PGID_TIMEOUT (10 * HZ)
/*
- * Start Sense Path Group ID helper function. Used in ccw_device_recog
- * and ccw_device_sense_pgid.
+ * Process path verification data and report result.
*/
-static int
-__ccw_device_sense_pgid_start(struct ccw_device *cdev)
-{
- struct subchannel *sch;
- struct ccw1 *ccw;
- int ret;
- int i;
-
- sch = to_subchannel(cdev->dev.parent);
- /* Return if we already checked on all paths. */
- if (cdev->private->imask == 0)
- return (sch->lpm == 0) ? -ENODEV : -EACCES;
- i = 8 - ffs(cdev->private->imask);
-
- /* Setup sense path group id channel program. */
- ccw = cdev->private->iccws;
- ccw->cmd_code = CCW_CMD_SENSE_PGID;
- ccw->count = sizeof (struct pgid);
- ccw->flags = CCW_FLAG_SLI;
-
- /* Reset device status. */
- memset(&cdev->private->irb, 0, sizeof(struct irb));
- /* Try on every path. */
- ret = -ENODEV;
- while (cdev->private->imask != 0) {
- /* Try every path multiple times. */
- ccw->cda = (__u32) __pa (&cdev->private->pgid[i]);
- if (cdev->private->iretry > 0) {
- cdev->private->iretry--;
- /* Reset internal retry indication. */
- cdev->private->flags.intretry = 0;
- ret = cio_start (sch, cdev->private->iccws,
- cdev->private->imask);
- /* ret is 0, -EBUSY, -EACCES or -ENODEV */
- if (ret != -EACCES)
- return ret;
- CIO_MSG_EVENT(3, "SNID - Device %04x on Subchannel "
- "0.%x.%04x, lpm %02X, became 'not "
- "operational'\n",
- cdev->private->dev_id.devno,
- sch->schid.ssid,
- sch->schid.sch_no, cdev->private->imask);
-
- }
- cdev->private->imask >>= 1;
- cdev->private->iretry = 5;
- i++;
- }
-
- return ret;
-}
-
-void
-ccw_device_sense_pgid_start(struct ccw_device *cdev)
-{
- int ret;
-
- /* Set a timeout of 60s */
- ccw_device_set_timeout(cdev, 60*HZ);
-
- cdev->private->state = DEV_STATE_SENSE_PGID;
- cdev->private->imask = 0x80;
- cdev->private->iretry = 5;
- memset (&cdev->private->pgid, 0, sizeof (cdev->private->pgid));
- ret = __ccw_device_sense_pgid_start(cdev);
- if (ret && ret != -EBUSY)
- ccw_device_sense_pgid_done(cdev, ret);
-}
-
-/*
- * Called from interrupt context to check if a valid answer
- * to Sense Path Group ID was received.
- */
-static int
-__ccw_device_check_sense_pgid(struct ccw_device *cdev)
-{
- struct subchannel *sch;
- struct irb *irb;
- int i;
-
- sch = to_subchannel(cdev->dev.parent);
- irb = &cdev->private->irb;
- if (irb->scsw.cmd.fctl & (SCSW_FCTL_HALT_FUNC | SCSW_FCTL_CLEAR_FUNC)) {
- /* Retry Sense PGID if requested. */
- if (cdev->private->flags.intretry) {
- cdev->private->flags.intretry = 0;
- return -EAGAIN;
- }
- return -ETIME;
- }
- if (irb->esw.esw0.erw.cons &&
- (irb->ecw[0]&(SNS0_CMD_REJECT|SNS0_INTERVENTION_REQ))) {
- /*
- * If the device doesn't support the Sense Path Group ID
- * command further retries wouldn't help ...
- */
- return -EOPNOTSUPP;
- }
- if (irb->esw.esw0.erw.cons) {
- CIO_MSG_EVENT(2, "SNID - device 0.%x.%04x, unit check, "
- "lpum %02X, cnt %02d, sns : "
- "%02X%02X%02X%02X %02X%02X%02X%02X ...\n",
- cdev->private->dev_id.ssid,
- cdev->private->dev_id.devno,
- irb->esw.esw0.sublog.lpum,
- irb->esw.esw0.erw.scnt,
- irb->ecw[0], irb->ecw[1],
- irb->ecw[2], irb->ecw[3],
- irb->ecw[4], irb->ecw[5],
- irb->ecw[6], irb->ecw[7]);
- return -EAGAIN;
- }
- if (irb->scsw.cmd.cc == 3) {
- u8 lpm;
-
- lpm = to_io_private(sch)->orb.cmd.lpm;
- CIO_MSG_EVENT(3, "SNID - Device %04x on Subchannel 0.%x.%04x,"
- " lpm %02X, became 'not operational'\n",
- cdev->private->dev_id.devno, sch->schid.ssid,
- sch->schid.sch_no, lpm);
- return -EACCES;
- }
- i = 8 - ffs(cdev->private->imask);
- if (cdev->private->pgid[i].inf.ps.state2 == SNID_STATE2_RESVD_ELSE) {
- CIO_MSG_EVENT(2, "SNID - Device %04x on Subchannel 0.%x.%04x "
- "is reserved by someone else\n",
- cdev->private->dev_id.devno, sch->schid.ssid,
- sch->schid.sch_no);
- return -EUSERS;
- }
- return 0;
-}
-
-/*
- * Got interrupt for Sense Path Group ID.
- */
-void
-ccw_device_sense_pgid_irq(struct ccw_device *cdev, enum dev_event dev_event)
-{
- struct subchannel *sch;
- struct irb *irb;
- int ret;
-
- irb = (struct irb *) __LC_IRB;
-
- if (irb->scsw.cmd.stctl ==
- (SCSW_STCTL_STATUS_PEND | SCSW_STCTL_ALERT_STATUS)) {
- if (__ccw_device_should_retry(&irb->scsw)) {
- ret = __ccw_device_sense_pgid_start(cdev);
- if (ret && ret != -EBUSY)
- ccw_device_sense_pgid_done(cdev, ret);
- }
- return;
- }
- if (ccw_device_accumulate_and_sense(cdev, irb) != 0)
- return;
- sch = to_subchannel(cdev->dev.parent);
- ret = __ccw_device_check_sense_pgid(cdev);
- memset(&cdev->private->irb, 0, sizeof(struct irb));
- switch (ret) {
- /* 0, -ETIME, -EOPNOTSUPP, -EAGAIN, -EACCES or -EUSERS */
- case -EOPNOTSUPP: /* Sense Path Group ID not supported */
- ccw_device_sense_pgid_done(cdev, -EOPNOTSUPP);
- break;
- case -ETIME: /* Sense path group id stopped by timeout. */
- ccw_device_sense_pgid_done(cdev, -ETIME);
- break;
- case -EACCES: /* channel is not operational. */
- sch->lpm &= ~cdev->private->imask;
- /* Fall through. */
- case 0: /* Sense Path Group ID successful. */
- cdev->private->imask >>= 1;
- cdev->private->iretry = 5;
- /* Fall through. */
- case -EAGAIN: /* Try again. */
- ret = __ccw_device_sense_pgid_start(cdev);
- if (ret != 0 && ret != -EBUSY)
- ccw_device_sense_pgid_done(cdev, ret);
- break;
- case -EUSERS: /* device is reserved for someone else. */
- ccw_device_sense_pgid_done(cdev, -EUSERS);
- break;
- }
-}
-
-/*
- * Path Group ID helper function.
- */
-static int
-__ccw_device_do_pgid(struct ccw_device *cdev, __u8 func)
-{
- struct subchannel *sch;
- struct ccw1 *ccw;
- int ret;
-
- sch = to_subchannel(cdev->dev.parent);
-
- /* Setup sense path group id channel program. */
- cdev->private->pgid[0].inf.fc = func;
- ccw = cdev->private->iccws;
- if (cdev->private->flags.pgid_single)
- cdev->private->pgid[0].inf.fc |= SPID_FUNC_SINGLE_PATH;
- else
- cdev->private->pgid[0].inf.fc |= SPID_FUNC_MULTI_PATH;
- ccw->cmd_code = CCW_CMD_SET_PGID;
- ccw->cda = (__u32) __pa (&cdev->private->pgid[0]);
- ccw->count = sizeof (struct pgid);
- ccw->flags = CCW_FLAG_SLI;
-
- /* Reset device status. */
- memset(&cdev->private->irb, 0, sizeof(struct irb));
-
- /* Try multiple times. */
- ret = -EACCES;
- if (cdev->private->iretry > 0) {
- cdev->private->iretry--;
- /* Reset internal retry indication. */
- cdev->private->flags.intretry = 0;
- ret = cio_start (sch, cdev->private->iccws,
- cdev->private->imask);
- /* We expect an interrupt in case of success or busy
- * indication. */
- if ((ret == 0) || (ret == -EBUSY))
- return ret;
- }
- /* PGID command failed on this path. */
- CIO_MSG_EVENT(3, "SPID - Device %04x on Subchannel "
- "0.%x.%04x, lpm %02X, became 'not operational'\n",
- cdev->private->dev_id.devno, sch->schid.ssid,
- sch->schid.sch_no, cdev->private->imask);
- return ret;
-}
-
-/*
- * Helper function to send a nop ccw down a path.
- */
-static int __ccw_device_do_nop(struct ccw_device *cdev)
-{
- struct subchannel *sch;
- struct ccw1 *ccw;
- int ret;
-
- sch = to_subchannel(cdev->dev.parent);
-
- /* Setup nop channel program. */
- ccw = cdev->private->iccws;
- ccw->cmd_code = CCW_CMD_NOOP;
- ccw->cda = 0;
- ccw->count = 0;
- ccw->flags = CCW_FLAG_SLI;
-
- /* Reset device status. */
- memset(&cdev->private->irb, 0, sizeof(struct irb));
-
- /* Try multiple times. */
- ret = -EACCES;
- if (cdev->private->iretry > 0) {
- cdev->private->iretry--;
- /* Reset internal retry indication. */
- cdev->private->flags.intretry = 0;
- ret = cio_start (sch, cdev->private->iccws,
- cdev->private->imask);
- /* We expect an interrupt in case of success or busy
- * indication. */
- if ((ret == 0) || (ret == -EBUSY))
- return ret;
- }
- /* nop command failed on this path. */
- CIO_MSG_EVENT(3, "NOP - Device %04x on Subchannel "
- "0.%x.%04x, lpm %02X, became 'not operational'\n",
- cdev->private->dev_id.devno, sch->schid.ssid,
- sch->schid.sch_no, cdev->private->imask);
- return ret;
-}
-
-
-/*
- * Called from interrupt context to check if a valid answer
- * to Set Path Group ID was received.
- */
-static int
-__ccw_device_check_pgid(struct ccw_device *cdev)
-{
- struct subchannel *sch;
- struct irb *irb;
-
- sch = to_subchannel(cdev->dev.parent);
- irb = &cdev->private->irb;
- if (irb->scsw.cmd.fctl & (SCSW_FCTL_HALT_FUNC | SCSW_FCTL_CLEAR_FUNC)) {
- /* Retry Set PGID if requested. */
- if (cdev->private->flags.intretry) {
- cdev->private->flags.intretry = 0;
- return -EAGAIN;
- }
- return -ETIME;
- }
- if (irb->esw.esw0.erw.cons) {
- if (irb->ecw[0] & SNS0_CMD_REJECT)
- return -EOPNOTSUPP;
- /* Hmm, whatever happened, try again. */
- CIO_MSG_EVENT(2, "SPID - device 0.%x.%04x, unit check, "
- "cnt %02d, "
- "sns : %02X%02X%02X%02X %02X%02X%02X%02X ...\n",
- cdev->private->dev_id.ssid,
- cdev->private->dev_id.devno,
- irb->esw.esw0.erw.scnt,
- irb->ecw[0], irb->ecw[1],
- irb->ecw[2], irb->ecw[3],
- irb->ecw[4], irb->ecw[5],
- irb->ecw[6], irb->ecw[7]);
- return -EAGAIN;
- }
- if (irb->scsw.cmd.cc == 3) {
- CIO_MSG_EVENT(3, "SPID - Device %04x on Subchannel 0.%x.%04x,"
- " lpm %02X, became 'not operational'\n",
- cdev->private->dev_id.devno, sch->schid.ssid,
- sch->schid.sch_no, cdev->private->imask);
- return -EACCES;
- }
- return 0;
-}
-
-/*
- * Called from interrupt context to check the path status after a nop has
- * been send.
- */
-static int __ccw_device_check_nop(struct ccw_device *cdev)
-{
- struct subchannel *sch;
- struct irb *irb;
-
- sch = to_subchannel(cdev->dev.parent);
- irb = &cdev->private->irb;
- if (irb->scsw.cmd.fctl & (SCSW_FCTL_HALT_FUNC | SCSW_FCTL_CLEAR_FUNC)) {
- /* Retry NOP if requested. */
- if (cdev->private->flags.intretry) {
- cdev->private->flags.intretry = 0;
- return -EAGAIN;
- }
- return -ETIME;
- }
- if (irb->scsw.cmd.cc == 3) {
- CIO_MSG_EVENT(3, "NOP - Device %04x on Subchannel 0.%x.%04x,"
- " lpm %02X, became 'not operational'\n",
- cdev->private->dev_id.devno, sch->schid.ssid,
- sch->schid.sch_no, cdev->private->imask);
- return -EACCES;
- }
- return 0;
-}
-
-static void
-__ccw_device_verify_start(struct ccw_device *cdev)
-{
- struct subchannel *sch;
- __u8 func;
- int ret;
-
- sch = to_subchannel(cdev->dev.parent);
- /* Repeat for all paths. */
- for (; cdev->private->imask; cdev->private->imask >>= 1,
- cdev->private->iretry = 5) {
- if ((cdev->private->imask & sch->schib.pmcw.pam) == 0)
- /* Path not available, try next. */
- continue;
- if (cdev->private->options.pgroup) {
- if (sch->opm & cdev->private->imask)
- func = SPID_FUNC_ESTABLISH;
- else
- func = SPID_FUNC_RESIGN;
- ret = __ccw_device_do_pgid(cdev, func);
- } else
- ret = __ccw_device_do_nop(cdev);
- /* We expect an interrupt in case of success or busy
- * indication. */
- if (ret == 0 || ret == -EBUSY)
- return;
- /* Permanent path failure, try next. */
- }
- /* Done with all paths. */
- ccw_device_verify_done(cdev, (sch->vpm != 0) ? 0 : -ENODEV);
-}
-
-/*
- * Got interrupt for Set Path Group ID.
- */
-void
-ccw_device_verify_irq(struct ccw_device *cdev, enum dev_event dev_event)
-{
- struct subchannel *sch;
- struct irb *irb;
- int ret;
-
- irb = (struct irb *) __LC_IRB;
-
- if (irb->scsw.cmd.stctl ==
- (SCSW_STCTL_STATUS_PEND | SCSW_STCTL_ALERT_STATUS)) {
- if (__ccw_device_should_retry(&irb->scsw))
- __ccw_device_verify_start(cdev);
- return;
- }
- if (ccw_device_accumulate_and_sense(cdev, irb) != 0)
- return;
- sch = to_subchannel(cdev->dev.parent);
- if (cdev->private->options.pgroup)
- ret = __ccw_device_check_pgid(cdev);
- else
- ret = __ccw_device_check_nop(cdev);
- memset(&cdev->private->irb, 0, sizeof(struct irb));
-
- switch (ret) {
- /* 0, -ETIME, -EAGAIN, -EOPNOTSUPP or -EACCES */
- case 0:
- /* Path verification ccw finished successfully, update lpm. */
- sch->vpm |= sch->opm & cdev->private->imask;
- /* Go on with next path. */
- cdev->private->imask >>= 1;
- cdev->private->iretry = 5;
- __ccw_device_verify_start(cdev);
- break;
- case -EOPNOTSUPP:
- /*
- * One of those strange devices which claim to be able
- * to do multipathing but not for Set Path Group ID.
- */
- if (cdev->private->flags.pgid_single)
- cdev->private->options.pgroup = 0;
- else
- cdev->private->flags.pgid_single = 1;
- /* Retry */
- sch->vpm = 0;
- cdev->private->imask = 0x80;
- cdev->private->iretry = 5;
- /* fall through. */
- case -EAGAIN: /* Try again. */
- __ccw_device_verify_start(cdev);
- break;
- case -ETIME: /* Set path group id stopped by timeout. */
- ccw_device_verify_done(cdev, -ETIME);
- break;
- case -EACCES: /* channel is not operational. */
- cdev->private->imask >>= 1;
- cdev->private->iretry = 5;
- __ccw_device_verify_start(cdev);
- break;
- }
-}
-
-void
-ccw_device_verify_start(struct ccw_device *cdev)
+static void verify_done(struct ccw_device *cdev, int rc)
{
struct subchannel *sch = to_subchannel(cdev->dev.parent);
+ struct ccw_dev_id *id = &cdev->private->dev_id;
+ int mpath = cdev->private->flags.mpath;
+ int pgroup = cdev->private->flags.pgroup;
- cdev->private->flags.pgid_single = 0;
- cdev->private->imask = 0x80;
- cdev->private->iretry = 5;
-
- /* Start with empty vpm. */
- sch->vpm = 0;
-
- /* Get current pam. */
- if (cio_update_schib(sch)) {
- ccw_device_verify_done(cdev, -ENODEV);
- return;
+ if (rc)
+ goto out;
+ /* Ensure consistent multipathing state at device and channel. */
+ if (sch->config.mp != mpath) {
+ sch->config.mp = mpath;
+ rc = cio_commit_config(sch);
}
- /* After 60s path verification is considered to have failed. */
- ccw_device_set_timeout(cdev, 60*HZ);
- __ccw_device_verify_start(cdev);
-}
-
-static void
-__ccw_device_disband_start(struct ccw_device *cdev)
-{
- struct subchannel *sch;
- int ret;
-
- sch = to_subchannel(cdev->dev.parent);
- while (cdev->private->imask != 0) {
- if (sch->lpm & cdev->private->imask) {
- ret = __ccw_device_do_pgid(cdev, SPID_FUNC_DISBAND);
- if (ret == 0)
- return;
- }
- cdev->private->iretry = 5;
- cdev->private->imask >>= 1;
- }
- ccw_device_disband_done(cdev, (sch->lpm != 0) ? 0 : -ENODEV);
+out:
+ CIO_MSG_EVENT(2, "vrfy: device 0.%x.%04x: rc=%d pgroup=%d mpath=%d "
+ "vpm=%02x\n", id->ssid, id->devno, rc, pgroup, mpath,
+ sch->vpm);
+ ccw_device_verify_done(cdev, rc);
}
/*
- * Got interrupt for Unset Path Group ID.
+ * Create channel program to perform a NOOP.
*/
-void
-ccw_device_disband_irq(struct ccw_device *cdev, enum dev_event dev_event)
+static void nop_build_cp(struct ccw_device *cdev)
{
- struct subchannel *sch;
- struct irb *irb;
- int ret;
+ struct ccw_request *req = &cdev->private->req;
+ struct ccw1 *cp = cdev->private->iccws;
- irb = (struct irb *) __LC_IRB;
+ cp->cmd_code = CCW_CMD_NOOP;
+ cp->cda = 0;
+ cp->count = 0;
+ cp->flags = CCW_FLAG_SLI;
+ req->cp = cp;
+}
- if (irb->scsw.cmd.stctl ==
- (SCSW_STCTL_STATUS_PEND | SCSW_STCTL_ALERT_STATUS)) {
- if (__ccw_device_should_retry(&irb->scsw))
- __ccw_device_disband_start(cdev);
- return;
- }
- if (ccw_device_accumulate_and_sense(cdev, irb) != 0)
- return;
- sch = to_subchannel(cdev->dev.parent);
- ret = __ccw_device_check_pgid(cdev);
- memset(&cdev->private->irb, 0, sizeof(struct irb));
- switch (ret) {
- /* 0, -ETIME, -EAGAIN, -EOPNOTSUPP or -EACCES */
- case 0: /* disband successful. */
- ccw_device_disband_done(cdev, ret);
+/*
+ * Perform NOOP on a single path.
+ */
+static void nop_do(struct ccw_device *cdev)
+{
+ struct subchannel *sch = to_subchannel(cdev->dev.parent);
+ struct ccw_request *req = &cdev->private->req;
+
+ /* Adjust lpm. */
+ req->lpm = lpm_adjust(req->lpm, sch->schib.pmcw.pam & sch->opm);
+ if (!req->lpm)
+ goto out_nopath;
+ nop_build_cp(cdev);
+ ccw_request_start(cdev);
+ return;
+
+out_nopath:
+ verify_done(cdev, sch->vpm ? 0 : -EACCES);
+}
+
+/*
+ * Adjust NOOP I/O status.
+ */
+static enum io_status nop_filter(struct ccw_device *cdev, void *data,
+ struct irb *irb, enum io_status status)
+{
+ /* Only subchannel status might indicate a path error. */
+ if (status == IO_STATUS_ERROR && irb->scsw.cmd.cstat == 0)
+ return IO_DONE;
+ return status;
+}
+
+/*
+ * Process NOOP request result for a single path.
+ */
+static void nop_callback(struct ccw_device *cdev, void *data, int rc)
+{
+ struct subchannel *sch = to_subchannel(cdev->dev.parent);
+ struct ccw_request *req = &cdev->private->req;
+
+ if (rc == 0)
+ sch->vpm |= req->lpm;
+ else if (rc != -EACCES)
+ goto err;
+ req->lpm >>= 1;
+ nop_do(cdev);
+ return;
+
+err:
+ verify_done(cdev, rc);
+}
+
+/*
+ * Create channel program to perform SET PGID on a single path.
+ */
+static void spid_build_cp(struct ccw_device *cdev, u8 fn)
+{
+ struct ccw_request *req = &cdev->private->req;
+ struct ccw1 *cp = cdev->private->iccws;
+ int i = 8 - ffs(req->lpm);
+ struct pgid *pgid = &cdev->private->pgid[i];
+
+ pgid->inf.fc = fn;
+ cp->cmd_code = CCW_CMD_SET_PGID;
+ cp->cda = (u32) (addr_t) pgid;
+ cp->count = sizeof(*pgid);
+ cp->flags = CCW_FLAG_SLI;
+ req->cp = cp;
+}
+
+/*
+ * Perform establish/resign SET PGID on a single path.
+ */
+static void spid_do(struct ccw_device *cdev)
+{
+ struct subchannel *sch = to_subchannel(cdev->dev.parent);
+ struct ccw_request *req = &cdev->private->req;
+ u8 fn;
+
+ /* Use next available path that is not already in correct state. */
+ req->lpm = lpm_adjust(req->lpm, sch->schib.pmcw.pam & ~sch->vpm);
+ if (!req->lpm)
+ goto out_nopath;
+ /* Channel program setup. */
+ if (req->lpm & sch->opm)
+ fn = SPID_FUNC_ESTABLISH;
+ else
+ fn = SPID_FUNC_RESIGN;
+ if (cdev->private->flags.mpath)
+ fn |= SPID_FUNC_MULTI_PATH;
+ spid_build_cp(cdev, fn);
+ ccw_request_start(cdev);
+ return;
+
+out_nopath:
+ verify_done(cdev, sch->vpm ? 0 : -EACCES);
+}
+
+static void verify_start(struct ccw_device *cdev);
+
+/*
+ * Process SET PGID request result for a single path.
+ */
+static void spid_callback(struct ccw_device *cdev, void *data, int rc)
+{
+ struct subchannel *sch = to_subchannel(cdev->dev.parent);
+ struct ccw_request *req = &cdev->private->req;
+
+ switch (rc) {
+ case 0:
+ sch->vpm |= req->lpm & sch->opm;
+ break;
+ case -EACCES:
break;
case -EOPNOTSUPP:
- /*
- * One of those strange devices which claim to be able
- * to do multipathing but not for Unset Path Group ID.
- */
- cdev->private->flags.pgid_single = 1;
- /* fall through. */
- case -EAGAIN: /* Try again. */
- __ccw_device_disband_start(cdev);
+ if (cdev->private->flags.mpath) {
+ /* Try without multipathing. */
+ cdev->private->flags.mpath = 0;
+ goto out_restart;
+ }
+ /* Try without pathgrouping. */
+ cdev->private->flags.pgroup = 0;
+ goto out_restart;
+ default:
+ goto err;
+ }
+ req->lpm >>= 1;
+ spid_do(cdev);
+ return;
+
+out_restart:
+ verify_start(cdev);
+ return;
+err:
+ verify_done(cdev, rc);
+}
+
+static void spid_start(struct ccw_device *cdev)
+{
+ struct ccw_request *req = &cdev->private->req;
+
+ /* Initialize request data. */
+ memset(req, 0, sizeof(*req));
+ req->timeout = PGID_TIMEOUT;
+ req->maxretries = PGID_RETRIES;
+ req->lpm = 0x80;
+ req->callback = spid_callback;
+ spid_do(cdev);
+}
+
+static int pgid_cmp(struct pgid *p1, struct pgid *p2)
+{
+ return memcmp((char *) p1 + 1, (char *) p2 + 1,
+ sizeof(struct pgid) - 1);
+}
+
+/*
+ * Determine pathgroup state from PGID data.
+ */
+static void pgid_analyze(struct ccw_device *cdev, struct pgid **p,
+ int *mismatch, int *reserved, int *reset)
+{
+ struct pgid *pgid = &cdev->private->pgid[0];
+ struct pgid *first = NULL;
+ int lpm;
+ int i;
+
+ *mismatch = 0;
+ *reserved = 0;
+ *reset = 0;
+ for (i = 0, lpm = 0x80; i < 8; i++, pgid++, lpm >>= 1) {
+ if ((cdev->private->pgid_valid_mask & lpm) == 0)
+ continue;
+ if (pgid->inf.ps.state2 == SNID_STATE2_RESVD_ELSE)
+ *reserved = 1;
+ if (pgid->inf.ps.state1 == SNID_STATE1_RESET) {
+ /* A PGID was reset. */
+ *reset = 1;
+ continue;
+ }
+ if (!first) {
+ first = pgid;
+ continue;
+ }
+ if (pgid_cmp(pgid, first) != 0)
+ *mismatch = 1;
+ }
+ if (!first)
+ first = &channel_subsystems[0]->global_pgid;
+ *p = first;
+}
+
+static u8 pgid_to_vpm(struct ccw_device *cdev)
+{
+ struct subchannel *sch = to_subchannel(cdev->dev.parent);
+ struct pgid *pgid;
+ int i;
+ int lpm;
+ u8 vpm = 0;
+
+ /* Set VPM bits for paths which are already in the target state. */
+ for (i = 0; i < 8; i++) {
+ lpm = 0x80 >> i;
+ if ((cdev->private->pgid_valid_mask & lpm) == 0)
+ continue;
+ pgid = &cdev->private->pgid[i];
+ if (sch->opm & lpm) {
+ if (pgid->inf.ps.state1 != SNID_STATE1_GROUPED)
+ continue;
+ } else {
+ if (pgid->inf.ps.state1 != SNID_STATE1_UNGROUPED)
+ continue;
+ }
+ if (cdev->private->flags.mpath) {
+ if (pgid->inf.ps.state3 != SNID_STATE3_MULTI_PATH)
+ continue;
+ } else {
+ if (pgid->inf.ps.state3 != SNID_STATE3_SINGLE_PATH)
+ continue;
+ }
+ vpm |= lpm;
+ }
+
+ return vpm;
+}
+
+static void pgid_fill(struct ccw_device *cdev, struct pgid *pgid)
+{
+ int i;
+
+ for (i = 0; i < 8; i++)
+ memcpy(&cdev->private->pgid[i], pgid, sizeof(struct pgid));
+}
+
+/*
+ * Process SENSE PGID data and report result.
+ */
+static void snid_done(struct ccw_device *cdev, int rc)
+{
+ struct ccw_dev_id *id = &cdev->private->dev_id;
+ struct subchannel *sch = to_subchannel(cdev->dev.parent);
+ struct pgid *pgid;
+ int mismatch = 0;
+ int reserved = 0;
+ int reset = 0;
+
+ if (rc)
+ goto out;
+ pgid_analyze(cdev, &pgid, &mismatch, &reserved, &reset);
+ if (reserved)
+ rc = -EUSERS;
+ else if (mismatch)
+ rc = -EOPNOTSUPP;
+ else {
+ sch->vpm = pgid_to_vpm(cdev);
+ pgid_fill(cdev, pgid);
+ }
+out:
+ CIO_MSG_EVENT(2, "snid: device 0.%x.%04x: rc=%d pvm=%02x vpm=%02x "
+ "mism=%d rsvd=%d reset=%d\n", id->ssid, id->devno, rc,
+ cdev->private->pgid_valid_mask, sch->vpm, mismatch,
+ reserved, reset);
+ switch (rc) {
+ case 0:
+ /* Anything left to do? */
+ if (sch->vpm == sch->schib.pmcw.pam) {
+ verify_done(cdev, sch->vpm == 0 ? -EACCES : 0);
+ return;
+ }
+ /* Perform path-grouping. */
+ spid_start(cdev);
break;
- case -ETIME: /* Set path group id stopped by timeout. */
- ccw_device_disband_done(cdev, -ETIME);
+ case -EOPNOTSUPP:
+ /* Path-grouping not supported. */
+ cdev->private->flags.pgroup = 0;
+ cdev->private->flags.mpath = 0;
+ verify_start(cdev);
break;
- case -EACCES: /* channel is not operational. */
- cdev->private->imask >>= 1;
- cdev->private->iretry = 5;
- __ccw_device_disband_start(cdev);
- break;
+ default:
+ verify_done(cdev, rc);
}
}
-void
-ccw_device_disband_start(struct ccw_device *cdev)
+/*
+ * Create channel program to perform a SENSE PGID on a single path.
+ */
+static void snid_build_cp(struct ccw_device *cdev)
{
- /* After 60s disbanding is considered to have failed. */
- ccw_device_set_timeout(cdev, 60*HZ);
+ struct ccw_request *req = &cdev->private->req;
+ struct ccw1 *cp = cdev->private->iccws;
+ int i = 8 - ffs(req->lpm);
- cdev->private->flags.pgid_single = 0;
- cdev->private->iretry = 5;
- cdev->private->imask = 0x80;
- __ccw_device_disband_start(cdev);
+ /* Channel program setup. */
+ cp->cmd_code = CCW_CMD_SENSE_PGID;
+ cp->cda = (u32) (addr_t) &cdev->private->pgid[i];
+ cp->count = sizeof(struct pgid);
+ cp->flags = CCW_FLAG_SLI;
+ req->cp = cp;
}
+
+/*
+ * Perform SENSE PGID on a single path.
+ */
+static void snid_do(struct ccw_device *cdev)
+{
+ struct subchannel *sch = to_subchannel(cdev->dev.parent);
+ struct ccw_request *req = &cdev->private->req;
+
+ /* Adjust lpm if paths are not set in pam. */
+ req->lpm = lpm_adjust(req->lpm, sch->schib.pmcw.pam);
+ if (!req->lpm)
+ goto out_nopath;
+ snid_build_cp(cdev);
+ ccw_request_start(cdev);
+ return;
+
+out_nopath:
+ snid_done(cdev, cdev->private->pgid_valid_mask ? 0 : -EACCES);
+}
+
+/*
+ * Process SENSE PGID request result for single path.
+ */
+static void snid_callback(struct ccw_device *cdev, void *data, int rc)
+{
+ struct ccw_request *req = &cdev->private->req;
+
+ if (rc == 0)
+ cdev->private->pgid_valid_mask |= req->lpm;
+ else if (rc != -EACCES)
+ goto err;
+ req->lpm >>= 1;
+ snid_do(cdev);
+ return;
+
+err:
+ snid_done(cdev, rc);
+}
+
+/*
+ * Perform path verification.
+ */
+static void verify_start(struct ccw_device *cdev)
+{
+ struct subchannel *sch = to_subchannel(cdev->dev.parent);
+ struct ccw_request *req = &cdev->private->req;
+ struct ccw_dev_id *devid = &cdev->private->dev_id;
+
+ sch->vpm = 0;
+ /* Initialize request data. */
+ memset(req, 0, sizeof(*req));
+ req->timeout = PGID_TIMEOUT;
+ req->maxretries = PGID_RETRIES;
+ req->lpm = 0x80;
+ if (cdev->private->flags.pgroup) {
+ CIO_TRACE_EVENT(4, "snid");
+ CIO_HEX_EVENT(4, devid, sizeof(*devid));
+ req->callback = snid_callback;
+ snid_do(cdev);
+ } else {
+ CIO_TRACE_EVENT(4, "nop");
+ CIO_HEX_EVENT(4, devid, sizeof(*devid));
+ req->filter = nop_filter;
+ req->callback = nop_callback;
+ nop_do(cdev);
+ }
+}
+
+/**
+ * ccw_device_verify_start - perform path verification
+ * @cdev: ccw device
+ *
+ * Perform an I/O on each available channel path to @cdev to determine which
+ * paths are operational. The resulting path mask is stored in sch->vpm.
+ * If device options specify pathgrouping, establish a pathgroup for the
+ * operational paths. When finished, call ccw_device_verify_done with a
+ * return code specifying the result.
+ */
+void ccw_device_verify_start(struct ccw_device *cdev)
+{
+ CIO_TRACE_EVENT(4, "vrfy");
+ CIO_HEX_EVENT(4, &cdev->private->dev_id, sizeof(cdev->private->dev_id));
+ /* Initialize PGID data. */
+ memset(cdev->private->pgid, 0, sizeof(cdev->private->pgid));
+ cdev->private->pgid_valid_mask = 0;
+ /*
+ * Initialize pathgroup and multipath state with target values.
+ * They may change in the course of path verification.
+ */
+ cdev->private->flags.pgroup = cdev->private->options.pgroup;
+ cdev->private->flags.mpath = cdev->private->options.mpath;
+ cdev->private->flags.doverify = 0;
+ verify_start(cdev);
+}
+
+/*
+ * Process disband SET PGID request result.
+ */
+static void disband_callback(struct ccw_device *cdev, void *data, int rc)
+{
+ struct subchannel *sch = to_subchannel(cdev->dev.parent);
+ struct ccw_dev_id *id = &cdev->private->dev_id;
+
+ if (rc)
+ goto out;
+ /* Ensure consistent multipathing state at device and channel. */
+ cdev->private->flags.mpath = 0;
+ if (sch->config.mp) {
+ sch->config.mp = 0;
+ rc = cio_commit_config(sch);
+ }
+out:
+ CIO_MSG_EVENT(0, "disb: device 0.%x.%04x: rc=%d\n", id->ssid, id->devno,
+ rc);
+ ccw_device_disband_done(cdev, rc);
+}
+
+/**
+ * ccw_device_disband_start - disband pathgroup
+ * @cdev: ccw device
+ *
+ * Execute a SET PGID channel program on @cdev to disband a previously
+ * established pathgroup. When finished, call ccw_device_disband_done with
+ * a return code specifying the result.
+ */
+void ccw_device_disband_start(struct ccw_device *cdev)
+{
+ struct subchannel *sch = to_subchannel(cdev->dev.parent);
+ struct ccw_request *req = &cdev->private->req;
+ u8 fn;
+
+ CIO_TRACE_EVENT(4, "disb");
+ CIO_HEX_EVENT(4, &cdev->private->dev_id, sizeof(cdev->private->dev_id));
+ /* Request setup. */
+ memset(req, 0, sizeof(*req));
+ req->timeout = PGID_TIMEOUT;
+ req->maxretries = PGID_RETRIES;
+ req->lpm = sch->schib.pmcw.pam & sch->opm;
+ req->callback = disband_callback;
+ fn = SPID_FUNC_DISBAND;
+ if (cdev->private->flags.mpath)
+ fn |= SPID_FUNC_MULTI_PATH;
+ spid_build_cp(cdev, fn);
+ ccw_request_start(cdev);
+}
+
+static void stlck_build_cp(struct ccw_device *cdev, void *buf1, void *buf2)
+{
+ struct ccw_request *req = &cdev->private->req;
+ struct ccw1 *cp = cdev->private->iccws;
+
+ cp[0].cmd_code = CCW_CMD_STLCK;
+ cp[0].cda = (u32) (addr_t) buf1;
+ cp[0].count = 32;
+ cp[0].flags = CCW_FLAG_CC;
+ cp[1].cmd_code = CCW_CMD_RELEASE;
+ cp[1].cda = (u32) (addr_t) buf2;
+ cp[1].count = 32;
+ cp[1].flags = 0;
+ req->cp = cp;
+}
+
+static void stlck_callback(struct ccw_device *cdev, void *data, int rc)
+{
+ ccw_device_stlck_done(cdev, data, rc);
+}
+
+/**
+ * ccw_device_stlck_start - perform unconditional release
+ * @cdev: ccw device
+ * @data: data pointer to be passed to ccw_device_stlck_done
+ * @buf1: data pointer used in channel program
+ * @buf2: data pointer used in channel program
+ *
+ * Execute a channel program on @cdev to release an existing PGID reservation.
+ * When finished, call ccw_device_stlck_done with a return code specifying the
+ * result.
+ */
+void ccw_device_stlck_start(struct ccw_device *cdev, void *data, void *buf1,
+ void *buf2)
+{
+ struct subchannel *sch = to_subchannel(cdev->dev.parent);
+ struct ccw_request *req = &cdev->private->req;
+
+ CIO_TRACE_EVENT(4, "stlck");
+ CIO_HEX_EVENT(4, &cdev->private->dev_id, sizeof(cdev->private->dev_id));
+ /* Request setup. */
+ memset(req, 0, sizeof(*req));
+ req->timeout = PGID_TIMEOUT;
+ req->maxretries = PGID_RETRIES;
+ req->lpm = sch->schib.pmcw.pam & sch->opm;
+ req->data = data;
+ req->callback = stlck_callback;
+ stlck_build_cp(cdev, buf1, buf2);
+ ccw_request_start(cdev);
+}
+
diff --git a/drivers/s390/cio/device_status.c b/drivers/s390/cio/device_status.c
index 5814dbe..66d8066 100644
--- a/drivers/s390/cio/device_status.c
+++ b/drivers/s390/cio/device_status.c
@@ -336,9 +336,6 @@
sense_ccw->count = SENSE_MAX_COUNT;
sense_ccw->flags = CCW_FLAG_SLI;
- /* Reset internal retry indication. */
- cdev->private->flags.intretry = 0;
-
rc = cio_start(sch, sense_ccw, 0xff);
if (rc == -ENODEV || rc == -EACCES)
dev_fsm_event(cdev, DEV_EVENT_VERIFY);
diff --git a/drivers/s390/cio/io_sch.h b/drivers/s390/cio/io_sch.h
index 0b8f381..d72ae4c 100644
--- a/drivers/s390/cio/io_sch.h
+++ b/drivers/s390/cio/io_sch.h
@@ -1,7 +1,10 @@
#ifndef S390_IO_SCH_H
#define S390_IO_SCH_H
+#include <linux/types.h>
#include <asm/schid.h>
+#include <asm/ccwdev.h>
+#include "css.h"
/*
* command-mode operation request block
@@ -68,6 +71,52 @@
#define MAX_CIWS 8
/*
+ * Possible status values for a CCW request's I/O.
+ */
+enum io_status {
+ IO_DONE,
+ IO_RUNNING,
+ IO_STATUS_ERROR,
+ IO_PATH_ERROR,
+ IO_REJECTED,
+ IO_KILLED
+};
+
+/**
+ * ccw_request - Internal CCW request.
+ * @cp: channel program to start
+ * @timeout: maximum allowable time in jiffies between start I/O and interrupt
+ * @maxretries: number of retries per I/O operation and path
+ * @lpm: mask of paths to use
+ * @check: optional callback that determines if results are final
+ * @filter: optional callback to adjust request status based on IRB data
+ * @callback: final callback
+ * @data: user-defined pointer passed to all callbacks
+ * @mask: current path mask
+ * @retries: current number of retries
+ * @drc: delayed return code
+ * @cancel: non-zero if request was cancelled
+ * @done: non-zero if request was finished
+ */
+struct ccw_request {
+ struct ccw1 *cp;
+ unsigned long timeout;
+ u16 maxretries;
+ u8 lpm;
+ int (*check)(struct ccw_device *, void *);
+ enum io_status (*filter)(struct ccw_device *, void *, struct irb *,
+ enum io_status);
+ void (*callback)(struct ccw_device *, void *, int);
+ void *data;
+ /* These fields are used internally. */
+ u16 mask;
+ u16 retries;
+ int drc;
+ int cancel:1;
+ int done:1;
+} __attribute__((packed));
+
+/*
* sense-id response buffer layout
*/
struct senseid {
@@ -82,32 +131,43 @@
struct ciw ciw[MAX_CIWS]; /* variable # of CIWs */
} __attribute__ ((packed, aligned(4)));
+enum cdev_todo {
+ CDEV_TODO_NOTHING,
+ CDEV_TODO_ENABLE_CMF,
+ CDEV_TODO_REBIND,
+ CDEV_TODO_REGISTER,
+ CDEV_TODO_UNREG,
+ CDEV_TODO_UNREG_EVAL,
+};
+
struct ccw_device_private {
struct ccw_device *cdev;
struct subchannel *sch;
int state; /* device state */
atomic_t onoff;
- unsigned long registered;
struct ccw_dev_id dev_id; /* device id */
struct subchannel_id schid; /* subchannel number */
- u8 imask; /* lpm mask for SNID/SID/SPGID */
- int iretry; /* retry counter SNID/SID/SPGID */
+ struct ccw_request req; /* internal I/O request */
+ int iretry;
+ u8 pgid_valid_mask; /* mask of valid PGIDs */
struct {
unsigned int fast:1; /* post with "channel end" */
unsigned int repall:1; /* report every interrupt status */
unsigned int pgroup:1; /* do path grouping */
unsigned int force:1; /* allow forced online */
+ unsigned int mpath:1; /* do multipathing */
} __attribute__ ((packed)) options;
struct {
- unsigned int pgid_single:1; /* use single path for Set PGID */
unsigned int esid:1; /* Ext. SenseID supported by HW */
unsigned int dosense:1; /* delayed SENSE required */
unsigned int doverify:1; /* delayed path verification */
unsigned int donotify:1; /* call notify function */
unsigned int recog_done:1; /* dev. recog. complete */
unsigned int fake_irb:1; /* deliver faked irb */
- unsigned int intretry:1; /* retry internal operation */
unsigned int resuming:1; /* recognition while resume */
+ unsigned int pgroup:1; /* pathgroup is set up */
+ unsigned int mpath:1; /* multipathing is set up */
+ unsigned int initialized:1; /* set if initial reference held */
} __attribute__((packed)) flags;
unsigned long intparm; /* user interruption parameter */
struct qdio_irq *qdio_data;
@@ -115,7 +175,8 @@
struct senseid senseid; /* SenseID info */
struct pgid pgid[8]; /* path group IDs per chpid*/
struct ccw1 iccws[2]; /* ccws for SNID/SID/SPGID commands */
- struct work_struct kick_work;
+ struct work_struct todo_work;
+ enum cdev_todo todo;
wait_queue_head_t wait_q;
struct timer_list timer;
void *cmb; /* measurement information */
diff --git a/drivers/s390/crypto/ap_bus.c b/drivers/s390/crypto/ap_bus.c
index 1294876..20836ef 100644
--- a/drivers/s390/crypto/ap_bus.c
+++ b/drivers/s390/crypto/ap_bus.c
@@ -102,6 +102,7 @@
static DECLARE_WAIT_QUEUE_HEAD(ap_poll_wait);
static struct task_struct *ap_poll_kthread = NULL;
static DEFINE_MUTEX(ap_poll_thread_mutex);
+static DEFINE_SPINLOCK(ap_poll_timer_lock);
static void *ap_interrupt_indicator;
static struct hrtimer ap_poll_timer;
/* In LPAR poll with 4kHz frequency. Poll every 250000 nanoseconds.
@@ -282,6 +283,7 @@
* @psmid: The program supplied message identifier
* @msg: The message text
* @length: The message length
+ * @special: Special Bit
*
* Returns AP queue status structure.
* Condition code 1 on NQAP can't happen because the L bit is 1.
@@ -289,7 +291,8 @@
* because a segment boundary was reached. The NQAP is repeated.
*/
static inline struct ap_queue_status
-__ap_send(ap_qid_t qid, unsigned long long psmid, void *msg, size_t length)
+__ap_send(ap_qid_t qid, unsigned long long psmid, void *msg, size_t length,
+ unsigned int special)
{
typedef struct { char _[length]; } msgblock;
register unsigned long reg0 asm ("0") = qid | 0x40000000UL;
@@ -299,6 +302,9 @@
register unsigned long reg4 asm ("4") = (unsigned int) (psmid >> 32);
register unsigned long reg5 asm ("5") = (unsigned int) psmid;
+ if (special == 1)
+ reg0 |= 0x400000UL;
+
asm volatile (
"0: .long 0xb2ad0042\n" /* DQAP */
" brc 2,0b"
@@ -312,13 +318,15 @@
{
struct ap_queue_status status;
- status = __ap_send(qid, psmid, msg, length);
+ status = __ap_send(qid, psmid, msg, length, 0);
switch (status.response_code) {
case AP_RESPONSE_NORMAL:
return 0;
case AP_RESPONSE_Q_FULL:
case AP_RESPONSE_RESET_IN_PROGRESS:
return -EBUSY;
+ case AP_RESPONSE_REQ_FAC_NOT_INST:
+ return -EINVAL;
default: /* Device is gone. */
return -ENODEV;
}
@@ -1008,7 +1016,7 @@
}
status = __ap_send(ap_dev->qid, 0x0102030405060708ULL,
- msg, sizeof(msg));
+ msg, sizeof(msg), 0);
if (status.response_code != AP_RESPONSE_NORMAL) {
rc = -ENODEV;
goto out_free;
@@ -1163,16 +1171,19 @@
static inline void ap_schedule_poll_timer(void)
{
ktime_t hr_time;
+
+ spin_lock_bh(&ap_poll_timer_lock);
if (ap_using_interrupts() || ap_suspend_flag)
- return;
+ goto out;
if (hrtimer_is_queued(&ap_poll_timer))
- return;
+ goto out;
if (ktime_to_ns(hrtimer_expires_remaining(&ap_poll_timer)) <= 0) {
hr_time = ktime_set(0, poll_timeout);
hrtimer_forward_now(&ap_poll_timer, hr_time);
hrtimer_restart(&ap_poll_timer);
}
- return;
+out:
+ spin_unlock_bh(&ap_poll_timer_lock);
}
/**
@@ -1243,7 +1254,7 @@
/* Start the next request on the queue. */
ap_msg = list_entry(ap_dev->requestq.next, struct ap_message, list);
status = __ap_send(ap_dev->qid, ap_msg->psmid,
- ap_msg->message, ap_msg->length);
+ ap_msg->message, ap_msg->length, ap_msg->special);
switch (status.response_code) {
case AP_RESPONSE_NORMAL:
atomic_inc(&ap_poll_requests);
@@ -1261,6 +1272,7 @@
*flags |= 2;
break;
case AP_RESPONSE_MESSAGE_TOO_BIG:
+ case AP_RESPONSE_REQ_FAC_NOT_INST:
return -EINVAL;
default:
return -ENODEV;
@@ -1302,7 +1314,8 @@
if (list_empty(&ap_dev->requestq) &&
ap_dev->queue_count < ap_dev->queue_depth) {
status = __ap_send(ap_dev->qid, ap_msg->psmid,
- ap_msg->message, ap_msg->length);
+ ap_msg->message, ap_msg->length,
+ ap_msg->special);
switch (status.response_code) {
case AP_RESPONSE_NORMAL:
list_add_tail(&ap_msg->list, &ap_dev->pendingq);
@@ -1317,6 +1330,7 @@
ap_dev->requestq_count++;
ap_dev->total_request_count++;
return -EBUSY;
+ case AP_RESPONSE_REQ_FAC_NOT_INST:
case AP_RESPONSE_MESSAGE_TOO_BIG:
ap_dev->drv->receive(ap_dev, ap_msg, ERR_PTR(-EINVAL));
return -EINVAL;
@@ -1658,6 +1672,7 @@
*/
if (MACHINE_IS_VM)
poll_timeout = 1500000;
+ spin_lock_init(&ap_poll_timer_lock);
hrtimer_init(&ap_poll_timer, CLOCK_MONOTONIC, HRTIMER_MODE_ABS);
ap_poll_timer.function = ap_poll_timeout;
diff --git a/drivers/s390/crypto/ap_bus.h b/drivers/s390/crypto/ap_bus.h
index a353622..4785d07 100644
--- a/drivers/s390/crypto/ap_bus.h
+++ b/drivers/s390/crypto/ap_bus.h
@@ -87,6 +87,7 @@
#define AP_RESPONSE_INDEX_TOO_BIG 0x11
#define AP_RESPONSE_NO_FIRST_PART 0x13
#define AP_RESPONSE_MESSAGE_TOO_BIG 0x15
+#define AP_RESPONSE_REQ_FAC_NOT_INST 0x16
/*
* Known device types
@@ -96,8 +97,8 @@
#define AP_DEVICE_TYPE_PCIXCC 5
#define AP_DEVICE_TYPE_CEX2A 6
#define AP_DEVICE_TYPE_CEX2C 7
-#define AP_DEVICE_TYPE_CEX2A2 8
-#define AP_DEVICE_TYPE_CEX2C2 9
+#define AP_DEVICE_TYPE_CEX3A 8
+#define AP_DEVICE_TYPE_CEX3C 9
/*
* AP reset flag states
@@ -161,12 +162,25 @@
size_t length; /* Message length. */
void *private; /* ap driver private pointer. */
+ unsigned int special:1; /* Used for special commands. */
};
#define AP_DEVICE(dt) \
.dev_type=(dt), \
.match_flags=AP_DEVICE_ID_MATCH_DEVICE_TYPE,
+/**
+ * ap_init_message() - Initialize ap_message.
+ * Initialize a message before using. Otherwise this might result in
+ * unexpected behaviour.
+ */
+static inline void ap_init_message(struct ap_message *ap_msg)
+{
+ ap_msg->psmid = 0;
+ ap_msg->length = 0;
+ ap_msg->special = 0;
+}
+
/*
* Note: don't use ap_send/ap_recv after using ap_queue_message
* for the first time. Otherwise the ap message queue will get
diff --git a/drivers/s390/crypto/zcrypt_api.c b/drivers/s390/crypto/zcrypt_api.c
index 65b6a96..0d4d18b 100644
--- a/drivers/s390/crypto/zcrypt_api.c
+++ b/drivers/s390/crypto/zcrypt_api.c
@@ -299,9 +299,7 @@
*/
static int zcrypt_open(struct inode *inode, struct file *filp)
{
- lock_kernel();
atomic_inc(&zcrypt_open_count);
- unlock_kernel();
return 0;
}
@@ -1009,6 +1007,10 @@
zcrypt_count_type(ZCRYPT_CEX2C));
len += sprintf(resp_buff + len, "CEX2A count: %d\n",
zcrypt_count_type(ZCRYPT_CEX2A));
+ len += sprintf(resp_buff + len, "CEX3C count: %d\n",
+ zcrypt_count_type(ZCRYPT_CEX3C));
+ len += sprintf(resp_buff + len, "CEX3A count: %d\n",
+ zcrypt_count_type(ZCRYPT_CEX3A));
len += sprintf(resp_buff + len, "requestq count: %d\n",
zcrypt_requestq_count());
len += sprintf(resp_buff + len, "pendingq count: %d\n",
@@ -1017,7 +1019,7 @@
atomic_read(&zcrypt_open_count));
zcrypt_status_mask(workarea);
len += sprinthx("Online devices: 1=PCICA 2=PCICC 3=PCIXCC(MCL2) "
- "4=PCIXCC(MCL3) 5=CEX2C 6=CEX2A",
+ "4=PCIXCC(MCL3) 5=CEX2C 6=CEX2A 7=CEX3C 8=CEX3A",
resp_buff+len, workarea, AP_DEVICES);
zcrypt_qdepth_mask(workarea);
len += sprinthx("Waiting work element counts",
@@ -1095,8 +1097,9 @@
* '0' for no device, '1' for PCICA, '2' for PCICC,
* '3' for PCIXCC_MCL2, '4' for PCIXCC_MCL3,
* '5' for CEX2C and '6' for CEX2A'
+ * '7' for CEX3C and '8' for CEX3A
*/
- if (*ptr >= '0' && *ptr <= '6')
+ if (*ptr >= '0' && *ptr <= '8')
j++;
else if (*ptr == 'd' || *ptr == 'D')
zcrypt_disable_card(j++);
diff --git a/drivers/s390/crypto/zcrypt_api.h b/drivers/s390/crypto/zcrypt_api.h
index 1d1ec74..8e7ffbf 100644
--- a/drivers/s390/crypto/zcrypt_api.h
+++ b/drivers/s390/crypto/zcrypt_api.h
@@ -71,6 +71,8 @@
#define ZCRYPT_PCIXCC_MCL3 4
#define ZCRYPT_CEX2C 5
#define ZCRYPT_CEX2A 6
+#define ZCRYPT_CEX3C 7
+#define ZCRYPT_CEX3A 8
/**
* Large random numbers are pulled in 4096 byte chunks from the crypto cards
diff --git a/drivers/s390/crypto/zcrypt_cex2a.c b/drivers/s390/crypto/zcrypt_cex2a.c
index 326ea08..c6fb0aa 100644
--- a/drivers/s390/crypto/zcrypt_cex2a.c
+++ b/drivers/s390/crypto/zcrypt_cex2a.c
@@ -39,17 +39,24 @@
#define CEX2A_MIN_MOD_SIZE 1 /* 8 bits */
#define CEX2A_MAX_MOD_SIZE 256 /* 2048 bits */
+#define CEX3A_MIN_MOD_SIZE CEX2A_MIN_MOD_SIZE
+#define CEX3A_MAX_MOD_SIZE CEX2A_MAX_MOD_SIZE
#define CEX2A_SPEED_RATING 970
+#define CEX3A_SPEED_RATING 900 /* Fixme: Needs finetuning */
#define CEX2A_MAX_MESSAGE_SIZE 0x390 /* sizeof(struct type50_crb2_msg) */
#define CEX2A_MAX_RESPONSE_SIZE 0x110 /* max outputdatalength + type80_hdr */
+#define CEX3A_MAX_MESSAGE_SIZE CEX2A_MAX_MESSAGE_SIZE
+#define CEX3A_MAX_RESPONSE_SIZE CEX2A_MAX_RESPONSE_SIZE
+
#define CEX2A_CLEANUP_TIME (15*HZ)
+#define CEX3A_CLEANUP_TIME CEX2A_CLEANUP_TIME
static struct ap_device_id zcrypt_cex2a_ids[] = {
{ AP_DEVICE(AP_DEVICE_TYPE_CEX2A) },
- { AP_DEVICE(AP_DEVICE_TYPE_CEX2A2) },
+ { AP_DEVICE(AP_DEVICE_TYPE_CEX3A) },
{ /* end of list */ },
};
@@ -298,6 +305,7 @@
struct completion work;
int rc;
+ ap_init_message(&ap_msg);
ap_msg.message = kmalloc(CEX2A_MAX_MESSAGE_SIZE, GFP_KERNEL);
if (!ap_msg.message)
return -ENOMEM;
@@ -335,6 +343,7 @@
struct completion work;
int rc;
+ ap_init_message(&ap_msg);
ap_msg.message = kmalloc(CEX2A_MAX_MESSAGE_SIZE, GFP_KERNEL);
if (!ap_msg.message)
return -ENOMEM;
@@ -373,31 +382,45 @@
*/
static int zcrypt_cex2a_probe(struct ap_device *ap_dev)
{
- struct zcrypt_device *zdev;
- int rc;
+ struct zcrypt_device *zdev = NULL;
+ int rc = 0;
- zdev = zcrypt_device_alloc(CEX2A_MAX_RESPONSE_SIZE);
- if (!zdev)
- return -ENOMEM;
- zdev->ap_dev = ap_dev;
- zdev->ops = &zcrypt_cex2a_ops;
- zdev->online = 1;
- zdev->user_space_type = ZCRYPT_CEX2A;
- zdev->type_string = "CEX2A";
- zdev->min_mod_size = CEX2A_MIN_MOD_SIZE;
- zdev->max_mod_size = CEX2A_MAX_MOD_SIZE;
- zdev->short_crt = 1;
- zdev->speed_rating = CEX2A_SPEED_RATING;
- ap_dev->reply = &zdev->reply;
- ap_dev->private = zdev;
- rc = zcrypt_device_register(zdev);
- if (rc)
- goto out_free;
- return 0;
-
-out_free:
- ap_dev->private = NULL;
- zcrypt_device_free(zdev);
+ switch (ap_dev->device_type) {
+ case AP_DEVICE_TYPE_CEX2A:
+ zdev = zcrypt_device_alloc(CEX2A_MAX_RESPONSE_SIZE);
+ if (!zdev)
+ return -ENOMEM;
+ zdev->user_space_type = ZCRYPT_CEX2A;
+ zdev->type_string = "CEX2A";
+ zdev->min_mod_size = CEX2A_MIN_MOD_SIZE;
+ zdev->max_mod_size = CEX2A_MAX_MOD_SIZE;
+ zdev->short_crt = 1;
+ zdev->speed_rating = CEX2A_SPEED_RATING;
+ break;
+ case AP_DEVICE_TYPE_CEX3A:
+ zdev = zcrypt_device_alloc(CEX3A_MAX_RESPONSE_SIZE);
+ if (!zdev)
+ return -ENOMEM;
+ zdev->user_space_type = ZCRYPT_CEX3A;
+ zdev->type_string = "CEX3A";
+ zdev->min_mod_size = CEX3A_MIN_MOD_SIZE;
+ zdev->max_mod_size = CEX3A_MAX_MOD_SIZE;
+ zdev->short_crt = 1;
+ zdev->speed_rating = CEX3A_SPEED_RATING;
+ break;
+ }
+ if (zdev != NULL) {
+ zdev->ap_dev = ap_dev;
+ zdev->ops = &zcrypt_cex2a_ops;
+ zdev->online = 1;
+ ap_dev->reply = &zdev->reply;
+ ap_dev->private = zdev;
+ rc = zcrypt_device_register(zdev);
+ }
+ if (rc) {
+ ap_dev->private = NULL;
+ zcrypt_device_free(zdev);
+ }
return rc;
}
diff --git a/drivers/s390/crypto/zcrypt_pcica.c b/drivers/s390/crypto/zcrypt_pcica.c
index 17ba81b..e78df36 100644
--- a/drivers/s390/crypto/zcrypt_pcica.c
+++ b/drivers/s390/crypto/zcrypt_pcica.c
@@ -281,6 +281,7 @@
struct completion work;
int rc;
+ ap_init_message(&ap_msg);
ap_msg.message = kmalloc(PCICA_MAX_MESSAGE_SIZE, GFP_KERNEL);
if (!ap_msg.message)
return -ENOMEM;
@@ -318,6 +319,7 @@
struct completion work;
int rc;
+ ap_init_message(&ap_msg);
ap_msg.message = kmalloc(PCICA_MAX_MESSAGE_SIZE, GFP_KERNEL);
if (!ap_msg.message)
return -ENOMEM;
diff --git a/drivers/s390/crypto/zcrypt_pcicc.c b/drivers/s390/crypto/zcrypt_pcicc.c
index f4b0c47..a23726a 100644
--- a/drivers/s390/crypto/zcrypt_pcicc.c
+++ b/drivers/s390/crypto/zcrypt_pcicc.c
@@ -483,6 +483,7 @@
struct completion work;
int rc;
+ ap_init_message(&ap_msg);
ap_msg.message = (void *) get_zeroed_page(GFP_KERNEL);
if (!ap_msg.message)
return -ENOMEM;
@@ -521,6 +522,7 @@
struct completion work;
int rc;
+ ap_init_message(&ap_msg);
ap_msg.message = (void *) get_zeroed_page(GFP_KERNEL);
if (!ap_msg.message)
return -ENOMEM;
diff --git a/drivers/s390/crypto/zcrypt_pcixcc.c b/drivers/s390/crypto/zcrypt_pcixcc.c
index 5677b40..79c1205 100644
--- a/drivers/s390/crypto/zcrypt_pcixcc.c
+++ b/drivers/s390/crypto/zcrypt_pcixcc.c
@@ -43,10 +43,13 @@
#define PCIXCC_MIN_MOD_SIZE 16 /* 128 bits */
#define PCIXCC_MIN_MOD_SIZE_OLD 64 /* 512 bits */
#define PCIXCC_MAX_MOD_SIZE 256 /* 2048 bits */
+#define CEX3C_MIN_MOD_SIZE PCIXCC_MIN_MOD_SIZE
+#define CEX3C_MAX_MOD_SIZE PCIXCC_MAX_MOD_SIZE
-#define PCIXCC_MCL2_SPEED_RATING 7870 /* FIXME: needs finetuning */
+#define PCIXCC_MCL2_SPEED_RATING 7870
#define PCIXCC_MCL3_SPEED_RATING 7870
-#define CEX2C_SPEED_RATING 8540
+#define CEX2C_SPEED_RATING 7000
+#define CEX3C_SPEED_RATING 6500 /* FIXME: needs finetuning */
#define PCIXCC_MAX_ICA_MESSAGE_SIZE 0x77c /* max size type6 v2 crt message */
#define PCIXCC_MAX_ICA_RESPONSE_SIZE 0x77c /* max size type86 v2 reply */
@@ -72,7 +75,7 @@
static struct ap_device_id zcrypt_pcixcc_ids[] = {
{ AP_DEVICE(AP_DEVICE_TYPE_PCIXCC) },
{ AP_DEVICE(AP_DEVICE_TYPE_CEX2C) },
- { AP_DEVICE(AP_DEVICE_TYPE_CEX2C2) },
+ { AP_DEVICE(AP_DEVICE_TYPE_CEX3C) },
{ /* end of list */ },
};
@@ -326,6 +329,11 @@
function_code = ((unsigned char *)&msg->cprbx) + msg->cprbx.cprb_len;
memcpy(msg->hdr.function_code, function_code, sizeof(msg->hdr.function_code));
+ if (memcmp(function_code, "US", 2) == 0)
+ ap_msg->special = 1;
+ else
+ ap_msg->special = 0;
+
/* copy data block */
if (xcRB->request_data_length &&
copy_from_user(req_data, xcRB->request_data_address,
@@ -688,6 +696,7 @@
};
int rc;
+ ap_init_message(&ap_msg);
ap_msg.message = (void *) get_zeroed_page(GFP_KERNEL);
if (!ap_msg.message)
return -ENOMEM;
@@ -727,6 +736,7 @@
};
int rc;
+ ap_init_message(&ap_msg);
ap_msg.message = (void *) get_zeroed_page(GFP_KERNEL);
if (!ap_msg.message)
return -ENOMEM;
@@ -766,6 +776,7 @@
};
int rc;
+ ap_init_message(&ap_msg);
ap_msg.message = kmalloc(PCIXCC_MAX_XCRB_MESSAGE_SIZE, GFP_KERNEL);
if (!ap_msg.message)
return -ENOMEM;
@@ -805,6 +816,7 @@
};
int rc;
+ ap_init_message(&ap_msg);
ap_msg.message = kmalloc(PCIXCC_MAX_XCRB_MESSAGE_SIZE, GFP_KERNEL);
if (!ap_msg.message)
return -ENOMEM;
@@ -972,6 +984,7 @@
} __attribute__((packed)) *reply;
int rc, i;
+ ap_init_message(&ap_msg);
ap_msg.message = (void *) get_zeroed_page(GFP_KERNEL);
if (!ap_msg.message)
return -ENOMEM;
@@ -1016,14 +1029,15 @@
static int zcrypt_pcixcc_probe(struct ap_device *ap_dev)
{
struct zcrypt_device *zdev;
- int rc;
+ int rc = 0;
zdev = zcrypt_device_alloc(PCIXCC_MAX_RESPONSE_SIZE);
if (!zdev)
return -ENOMEM;
zdev->ap_dev = ap_dev;
zdev->online = 1;
- if (ap_dev->device_type == AP_DEVICE_TYPE_PCIXCC) {
+ switch (ap_dev->device_type) {
+ case AP_DEVICE_TYPE_PCIXCC:
rc = zcrypt_pcixcc_mcl(ap_dev);
if (rc < 0) {
zcrypt_device_free(zdev);
@@ -1041,13 +1055,25 @@
zdev->min_mod_size = PCIXCC_MIN_MOD_SIZE;
zdev->max_mod_size = PCIXCC_MAX_MOD_SIZE;
}
- } else {
+ break;
+ case AP_DEVICE_TYPE_CEX2C:
zdev->user_space_type = ZCRYPT_CEX2C;
zdev->type_string = "CEX2C";
zdev->speed_rating = CEX2C_SPEED_RATING;
zdev->min_mod_size = PCIXCC_MIN_MOD_SIZE;
zdev->max_mod_size = PCIXCC_MAX_MOD_SIZE;
+ break;
+ case AP_DEVICE_TYPE_CEX3C:
+ zdev->user_space_type = ZCRYPT_CEX3C;
+ zdev->type_string = "CEX3C";
+ zdev->speed_rating = CEX3C_SPEED_RATING;
+ zdev->min_mod_size = CEX3C_MIN_MOD_SIZE;
+ zdev->max_mod_size = CEX3C_MAX_MOD_SIZE;
+ break;
+ default:
+ goto out_free;
}
+
rc = zcrypt_pcixcc_rng_supported(ap_dev);
if (rc < 0) {
zcrypt_device_free(zdev);
diff --git a/drivers/s390/net/qeth_core_mpc.h b/drivers/s390/net/qeth_core_mpc.h
index 52c0343..1ba5115 100644
--- a/drivers/s390/net/qeth_core_mpc.h
+++ b/drivers/s390/net/qeth_core_mpc.h
@@ -528,7 +528,7 @@
(PDU_ENCAPSULATION(buffer) + 0x17)
#define QETH_ULP_ENABLE_RESP_LINK_TYPE(buffer) \
(PDU_ENCAPSULATION(buffer) + 0x2b)
-/* Layer 2 defintions */
+/* Layer 2 definitions */
#define QETH_PROT_LAYER2 0x08
#define QETH_PROT_TCPIP 0x03
#define QETH_PROT_OSN2 0x0a
diff --git a/drivers/s390/scsi/zfcp_aux.c b/drivers/s390/scsi/zfcp_aux.c
index 2889e5f..9d0c941 100644
--- a/drivers/s390/scsi/zfcp_aux.c
+++ b/drivers/s390/scsi/zfcp_aux.c
@@ -31,6 +31,7 @@
#include <linux/miscdevice.h>
#include <linux/seq_file.h>
#include "zfcp_ext.h"
+#include "zfcp_fc.h"
#define ZFCP_BUS_ID_SIZE 20
@@ -80,48 +81,40 @@
static void __init zfcp_init_device_configure(char *busid, u64 wwpn, u64 lun)
{
- struct ccw_device *ccwdev;
+ struct ccw_device *cdev;
struct zfcp_adapter *adapter;
struct zfcp_port *port;
struct zfcp_unit *unit;
- ccwdev = get_ccwdev_by_busid(&zfcp_ccw_driver, busid);
- if (!ccwdev)
+ cdev = get_ccwdev_by_busid(&zfcp_ccw_driver, busid);
+ if (!cdev)
return;
- if (ccw_device_set_online(ccwdev))
- goto out_ccwdev;
+ if (ccw_device_set_online(cdev))
+ goto out_ccw_device;
- mutex_lock(&zfcp_data.config_mutex);
- adapter = dev_get_drvdata(&ccwdev->dev);
+ adapter = zfcp_ccw_adapter_by_cdev(cdev);
if (!adapter)
- goto out_unlock;
- zfcp_adapter_get(adapter);
+ goto out_ccw_device;
port = zfcp_get_port_by_wwpn(adapter, wwpn);
if (!port)
goto out_port;
- zfcp_port_get(port);
unit = zfcp_unit_enqueue(port, lun);
if (IS_ERR(unit))
goto out_unit;
- mutex_unlock(&zfcp_data.config_mutex);
zfcp_erp_unit_reopen(unit, 0, "auidc_1", NULL);
zfcp_erp_wait(adapter);
flush_work(&unit->scsi_work);
- mutex_lock(&zfcp_data.config_mutex);
- zfcp_unit_put(unit);
out_unit:
- zfcp_port_put(port);
+ put_device(&port->sysfs_device);
out_port:
- zfcp_adapter_put(adapter);
-out_unlock:
- mutex_unlock(&zfcp_data.config_mutex);
-out_ccwdev:
- put_device(&ccwdev->dev);
+ zfcp_ccw_adapter_put(adapter);
+out_ccw_device:
+ put_device(&cdev->dev);
return;
}
@@ -167,7 +160,7 @@
int retval = -ENOMEM;
zfcp_data.gpn_ft_cache = zfcp_cache_hw_align("zfcp_gpn",
- sizeof(struct ct_iu_gpn_ft_req));
+ sizeof(struct zfcp_fc_gpn_ft_req));
if (!zfcp_data.gpn_ft_cache)
goto out;
@@ -182,12 +175,14 @@
goto out_sr_cache;
zfcp_data.gid_pn_cache = zfcp_cache_hw_align("zfcp_gid",
- sizeof(struct zfcp_gid_pn_data));
+ sizeof(struct zfcp_fc_gid_pn));
if (!zfcp_data.gid_pn_cache)
goto out_gid_cache;
- mutex_init(&zfcp_data.config_mutex);
- rwlock_init(&zfcp_data.config_lock);
+ zfcp_data.adisc_cache = zfcp_cache_hw_align("zfcp_adisc",
+ sizeof(struct zfcp_fc_els_adisc));
+ if (!zfcp_data.adisc_cache)
+ goto out_adisc_cache;
zfcp_data.scsi_transport_template =
fc_attach_transport(&zfcp_transport_functions);
@@ -200,7 +195,7 @@
goto out_misc;
}
- retval = zfcp_ccw_register();
+ retval = ccw_driver_register(&zfcp_ccw_driver);
if (retval) {
pr_err("The zfcp device driver could not register with "
"the common I/O layer\n");
@@ -216,6 +211,8 @@
out_misc:
fc_release_transport(zfcp_data.scsi_transport_template);
out_transport:
+ kmem_cache_destroy(zfcp_data.adisc_cache);
+out_adisc_cache:
kmem_cache_destroy(zfcp_data.gid_pn_cache);
out_gid_cache:
kmem_cache_destroy(zfcp_data.sr_buffer_cache);
@@ -229,6 +226,20 @@
module_init(zfcp_module_init);
+static void __exit zfcp_module_exit(void)
+{
+ ccw_driver_unregister(&zfcp_ccw_driver);
+ misc_deregister(&zfcp_cfdc_misc);
+ fc_release_transport(zfcp_data.scsi_transport_template);
+ kmem_cache_destroy(zfcp_data.adisc_cache);
+ kmem_cache_destroy(zfcp_data.gid_pn_cache);
+ kmem_cache_destroy(zfcp_data.sr_buffer_cache);
+ kmem_cache_destroy(zfcp_data.qtcb_cache);
+ kmem_cache_destroy(zfcp_data.gpn_ft_cache);
+}
+
+module_exit(zfcp_module_exit);
+
/**
* zfcp_get_unit_by_lun - find unit in unit list of port by FCP LUN
* @port: pointer to port to search for unit
@@ -238,12 +249,18 @@
*/
struct zfcp_unit *zfcp_get_unit_by_lun(struct zfcp_port *port, u64 fcp_lun)
{
+ unsigned long flags;
struct zfcp_unit *unit;
- list_for_each_entry(unit, &port->unit_list_head, list)
- if ((unit->fcp_lun == fcp_lun) &&
- !(atomic_read(&unit->status) & ZFCP_STATUS_COMMON_REMOVE))
- return unit;
+ read_lock_irqsave(&port->unit_list_lock, flags);
+ list_for_each_entry(unit, &port->unit_list, list)
+ if (unit->fcp_lun == fcp_lun) {
+ if (!get_device(&unit->sysfs_device))
+ unit = NULL;
+ read_unlock_irqrestore(&port->unit_list_lock, flags);
+ return unit;
+ }
+ read_unlock_irqrestore(&port->unit_list_lock, flags);
return NULL;
}
@@ -257,18 +274,35 @@
struct zfcp_port *zfcp_get_port_by_wwpn(struct zfcp_adapter *adapter,
u64 wwpn)
{
+ unsigned long flags;
struct zfcp_port *port;
- list_for_each_entry(port, &adapter->port_list_head, list)
- if ((port->wwpn == wwpn) &&
- !(atomic_read(&port->status) & ZFCP_STATUS_COMMON_REMOVE))
+ read_lock_irqsave(&adapter->port_list_lock, flags);
+ list_for_each_entry(port, &adapter->port_list, list)
+ if (port->wwpn == wwpn) {
+ if (!get_device(&port->sysfs_device))
+ port = NULL;
+ read_unlock_irqrestore(&adapter->port_list_lock, flags);
return port;
+ }
+ read_unlock_irqrestore(&adapter->port_list_lock, flags);
return NULL;
}
-static void zfcp_sysfs_unit_release(struct device *dev)
+/**
+ * zfcp_unit_release - dequeue unit
+ * @dev: pointer to device
+ *
+ * waits until all work is done on unit and removes it then from the unit->list
+ * of the associated port.
+ */
+static void zfcp_unit_release(struct device *dev)
{
- kfree(container_of(dev, struct zfcp_unit, sysfs_device));
+ struct zfcp_unit *unit = container_of(dev, struct zfcp_unit,
+ sysfs_device);
+
+ put_device(&unit->port->sysfs_device);
+ kfree(unit);
}
/**
@@ -276,43 +310,40 @@
* @port: pointer to port where unit is added
* @fcp_lun: FCP LUN of unit to be enqueued
* Returns: pointer to enqueued unit on success, ERR_PTR on error
- * Locks: config_mutex must be held to serialize changes to the unit list
*
* Sets up some unit internal structures and creates sysfs entry.
*/
struct zfcp_unit *zfcp_unit_enqueue(struct zfcp_port *port, u64 fcp_lun)
{
struct zfcp_unit *unit;
+ int retval = -ENOMEM;
- read_lock_irq(&zfcp_data.config_lock);
- if (zfcp_get_unit_by_lun(port, fcp_lun)) {
- read_unlock_irq(&zfcp_data.config_lock);
- return ERR_PTR(-EINVAL);
+ get_device(&port->sysfs_device);
+
+ unit = zfcp_get_unit_by_lun(port, fcp_lun);
+ if (unit) {
+ put_device(&unit->sysfs_device);
+ retval = -EEXIST;
+ goto err_out;
}
- read_unlock_irq(&zfcp_data.config_lock);
unit = kzalloc(sizeof(struct zfcp_unit), GFP_KERNEL);
if (!unit)
- return ERR_PTR(-ENOMEM);
-
- atomic_set(&unit->refcount, 0);
- init_waitqueue_head(&unit->remove_wq);
- INIT_WORK(&unit->scsi_work, zfcp_scsi_scan);
+ goto err_out;
unit->port = port;
unit->fcp_lun = fcp_lun;
+ unit->sysfs_device.parent = &port->sysfs_device;
+ unit->sysfs_device.release = zfcp_unit_release;
if (dev_set_name(&unit->sysfs_device, "0x%016llx",
(unsigned long long) fcp_lun)) {
kfree(unit);
- return ERR_PTR(-ENOMEM);
+ goto err_out;
}
- unit->sysfs_device.parent = &port->sysfs_device;
- unit->sysfs_device.release = zfcp_sysfs_unit_release;
- dev_set_drvdata(&unit->sysfs_device, unit);
+ retval = -EINVAL;
- /* mark unit unusable as long as sysfs registration is not complete */
- atomic_set_mask(ZFCP_STATUS_COMMON_REMOVE, &unit->status);
+ INIT_WORK(&unit->scsi_work, zfcp_scsi_scan);
spin_lock_init(&unit->latencies.lock);
unit->latencies.write.channel.min = 0xFFFFFFFF;
@@ -324,50 +355,30 @@
if (device_register(&unit->sysfs_device)) {
put_device(&unit->sysfs_device);
- return ERR_PTR(-EINVAL);
+ goto err_out;
}
if (sysfs_create_group(&unit->sysfs_device.kobj,
- &zfcp_sysfs_unit_attrs)) {
- device_unregister(&unit->sysfs_device);
- return ERR_PTR(-EINVAL);
- }
+ &zfcp_sysfs_unit_attrs))
+ goto err_out_put;
- zfcp_unit_get(unit);
+ write_lock_irq(&port->unit_list_lock);
+ list_add_tail(&unit->list, &port->unit_list);
+ write_unlock_irq(&port->unit_list_lock);
- write_lock_irq(&zfcp_data.config_lock);
- list_add_tail(&unit->list, &port->unit_list_head);
- atomic_clear_mask(ZFCP_STATUS_COMMON_REMOVE, &unit->status);
atomic_set_mask(ZFCP_STATUS_COMMON_RUNNING, &unit->status);
- write_unlock_irq(&zfcp_data.config_lock);
-
- zfcp_port_get(port);
-
return unit;
-}
-/**
- * zfcp_unit_dequeue - dequeue unit
- * @unit: pointer to zfcp_unit
- *
- * waits until all work is done on unit and removes it then from the unit->list
- * of the associated port.
- */
-void zfcp_unit_dequeue(struct zfcp_unit *unit)
-{
- wait_event(unit->remove_wq, atomic_read(&unit->refcount) == 0);
- write_lock_irq(&zfcp_data.config_lock);
- list_del(&unit->list);
- write_unlock_irq(&zfcp_data.config_lock);
- zfcp_port_put(unit->port);
- sysfs_remove_group(&unit->sysfs_device.kobj, &zfcp_sysfs_unit_attrs);
+err_out_put:
device_unregister(&unit->sysfs_device);
+err_out:
+ put_device(&port->sysfs_device);
+ return ERR_PTR(retval);
}
static int zfcp_allocate_low_mem_buffers(struct zfcp_adapter *adapter)
{
- /* must only be called with zfcp_data.config_mutex taken */
adapter->pool.erp_req =
mempool_create_kmalloc_pool(1, sizeof(struct zfcp_fsf_req));
if (!adapter->pool.erp_req)
@@ -405,9 +416,9 @@
if (!adapter->pool.status_read_data)
return -ENOMEM;
- adapter->pool.gid_pn_data =
+ adapter->pool.gid_pn =
mempool_create_slab_pool(1, zfcp_data.gid_pn_cache);
- if (!adapter->pool.gid_pn_data)
+ if (!adapter->pool.gid_pn)
return -ENOMEM;
return 0;
@@ -415,7 +426,6 @@
static void zfcp_free_low_mem_buffers(struct zfcp_adapter *adapter)
{
- /* zfcp_data.config_mutex must be held */
if (adapter->pool.erp_req)
mempool_destroy(adapter->pool.erp_req);
if (adapter->pool.scsi_req)
@@ -428,8 +438,8 @@
mempool_destroy(adapter->pool.status_read_req);
if (adapter->pool.status_read_data)
mempool_destroy(adapter->pool.status_read_data);
- if (adapter->pool.gid_pn_data)
- mempool_destroy(adapter->pool.gid_pn_data);
+ if (adapter->pool.gid_pn)
+ mempool_destroy(adapter->pool.gid_pn);
}
/**
@@ -497,53 +507,56 @@
* zfcp_adapter_enqueue - enqueue a new adapter to the list
* @ccw_device: pointer to the struct cc_device
*
- * Returns: 0 if a new adapter was successfully enqueued
- * -ENOMEM if alloc failed
+ * Returns: struct zfcp_adapter*
* Enqueues an adapter at the end of the adapter list in the driver data.
* All adapter internal structures are set up.
* Proc-fs entries are also created.
- * locks: config_mutex must be held to serialize changes to the adapter list
*/
-int zfcp_adapter_enqueue(struct ccw_device *ccw_device)
+struct zfcp_adapter *zfcp_adapter_enqueue(struct ccw_device *ccw_device)
{
struct zfcp_adapter *adapter;
- /*
- * Note: It is safe to release the list_lock, as any list changes
- * are protected by the config_mutex, which must be held to get here
- */
+ if (!get_device(&ccw_device->dev))
+ return ERR_PTR(-ENODEV);
adapter = kzalloc(sizeof(struct zfcp_adapter), GFP_KERNEL);
- if (!adapter)
- return -ENOMEM;
+ if (!adapter) {
+ put_device(&ccw_device->dev);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ kref_init(&adapter->ref);
ccw_device->handler = NULL;
adapter->ccw_device = ccw_device;
- atomic_set(&adapter->refcount, 0);
+
+ INIT_WORK(&adapter->stat_work, _zfcp_status_read_scheduler);
+ INIT_WORK(&adapter->scan_work, zfcp_fc_scan_ports);
if (zfcp_qdio_setup(adapter))
- goto qdio_failed;
+ goto failed;
if (zfcp_allocate_low_mem_buffers(adapter))
- goto low_mem_buffers_failed;
+ goto failed;
if (zfcp_reqlist_alloc(adapter))
- goto low_mem_buffers_failed;
+ goto failed;
if (zfcp_dbf_adapter_register(adapter))
- goto debug_register_failed;
+ goto failed;
if (zfcp_setup_adapter_work_queue(adapter))
- goto work_queue_failed;
+ goto failed;
if (zfcp_fc_gs_setup(adapter))
- goto generic_services_failed;
+ goto failed;
- init_waitqueue_head(&adapter->remove_wq);
+ rwlock_init(&adapter->port_list_lock);
+ INIT_LIST_HEAD(&adapter->port_list);
+
init_waitqueue_head(&adapter->erp_ready_wq);
init_waitqueue_head(&adapter->erp_done_wqh);
- INIT_LIST_HEAD(&adapter->port_list_head);
INIT_LIST_HEAD(&adapter->erp_ready_head);
INIT_LIST_HEAD(&adapter->erp_running_head);
@@ -553,83 +566,85 @@
rwlock_init(&adapter->abort_lock);
if (zfcp_erp_thread_setup(adapter))
- goto erp_thread_failed;
-
- INIT_WORK(&adapter->stat_work, _zfcp_status_read_scheduler);
- INIT_WORK(&adapter->scan_work, _zfcp_fc_scan_ports_later);
+ goto failed;
adapter->service_level.seq_print = zfcp_print_sl;
- /* mark adapter unusable as long as sysfs registration is not complete */
- atomic_set_mask(ZFCP_STATUS_COMMON_REMOVE, &adapter->status);
-
dev_set_drvdata(&ccw_device->dev, adapter);
if (sysfs_create_group(&ccw_device->dev.kobj,
&zfcp_sysfs_adapter_attrs))
- goto sysfs_failed;
-
- atomic_clear_mask(ZFCP_STATUS_COMMON_REMOVE, &adapter->status);
+ goto failed;
if (!zfcp_adapter_scsi_register(adapter))
- return 0;
+ return adapter;
-sysfs_failed:
- zfcp_erp_thread_kill(adapter);
-erp_thread_failed:
- zfcp_fc_gs_destroy(adapter);
-generic_services_failed:
+failed:
+ zfcp_adapter_unregister(adapter);
+ return ERR_PTR(-ENOMEM);
+}
+
+void zfcp_adapter_unregister(struct zfcp_adapter *adapter)
+{
+ struct ccw_device *cdev = adapter->ccw_device;
+
+ cancel_work_sync(&adapter->scan_work);
+ cancel_work_sync(&adapter->stat_work);
zfcp_destroy_adapter_work_queue(adapter);
-work_queue_failed:
+
+ zfcp_fc_wka_ports_force_offline(adapter->gs);
+ zfcp_adapter_scsi_unregister(adapter);
+ sysfs_remove_group(&cdev->dev.kobj, &zfcp_sysfs_adapter_attrs);
+
+ zfcp_erp_thread_kill(adapter);
zfcp_dbf_adapter_unregister(adapter->dbf);
-debug_register_failed:
- dev_set_drvdata(&ccw_device->dev, NULL);
- kfree(adapter->req_list);
-low_mem_buffers_failed:
- zfcp_free_low_mem_buffers(adapter);
-qdio_failed:
zfcp_qdio_destroy(adapter->qdio);
- kfree(adapter);
- return -ENOMEM;
+
+ zfcp_ccw_adapter_put(adapter); /* final put to release */
}
/**
- * zfcp_adapter_dequeue - remove the adapter from the resource list
- * @adapter: pointer to struct zfcp_adapter which should be removed
+ * zfcp_adapter_release - remove the adapter from the resource list
+ * @ref: pointer to struct kref
* locks: adapter list write lock is assumed to be held by caller
*/
-void zfcp_adapter_dequeue(struct zfcp_adapter *adapter)
+void zfcp_adapter_release(struct kref *ref)
{
- int retval = 0;
- unsigned long flags;
+ struct zfcp_adapter *adapter = container_of(ref, struct zfcp_adapter,
+ ref);
+ struct ccw_device *cdev = adapter->ccw_device;
- cancel_work_sync(&adapter->stat_work);
- zfcp_fc_wka_ports_force_offline(adapter->gs);
- sysfs_remove_group(&adapter->ccw_device->dev.kobj,
- &zfcp_sysfs_adapter_attrs);
dev_set_drvdata(&adapter->ccw_device->dev, NULL);
- /* sanity check: no pending FSF requests */
- spin_lock_irqsave(&adapter->req_list_lock, flags);
- retval = zfcp_reqlist_isempty(adapter);
- spin_unlock_irqrestore(&adapter->req_list_lock, flags);
- if (!retval)
- return;
-
zfcp_fc_gs_destroy(adapter);
- zfcp_erp_thread_kill(adapter);
- zfcp_destroy_adapter_work_queue(adapter);
- zfcp_dbf_adapter_unregister(adapter->dbf);
zfcp_free_low_mem_buffers(adapter);
- zfcp_qdio_destroy(adapter->qdio);
kfree(adapter->req_list);
kfree(adapter->fc_stats);
kfree(adapter->stats_reset_data);
kfree(adapter);
+ put_device(&cdev->dev);
}
-static void zfcp_sysfs_port_release(struct device *dev)
+/**
+ * zfcp_device_unregister - remove port, unit from system
+ * @dev: reference to device which is to be removed
+ * @grp: related reference to attribute group
+ *
+ * Helper function to unregister port, unit from system
+ */
+void zfcp_device_unregister(struct device *dev,
+ const struct attribute_group *grp)
{
- kfree(container_of(dev, struct zfcp_port, sysfs_device));
+ sysfs_remove_group(&dev->kobj, grp);
+ device_unregister(dev);
+}
+
+static void zfcp_port_release(struct device *dev)
+{
+ struct zfcp_port *port = container_of(dev, struct zfcp_port,
+ sysfs_device);
+
+ zfcp_ccw_adapter_put(port->adapter);
+ kfree(port);
}
/**
@@ -639,7 +654,6 @@
* @status: initial status for the port
* @d_id: destination id of the remote port to be enqueued
* Returns: pointer to enqueued port on success, ERR_PTR on error
- * Locks: config_mutex must be held to serialize changes to the port list
*
* All port internal structures are set up and the sysfs entry is generated.
* d_id is used to enqueue ports with a well known address like the Directory
@@ -649,20 +663,24 @@
u32 status, u32 d_id)
{
struct zfcp_port *port;
+ int retval = -ENOMEM;
- read_lock_irq(&zfcp_data.config_lock);
- if (zfcp_get_port_by_wwpn(adapter, wwpn)) {
- read_unlock_irq(&zfcp_data.config_lock);
- return ERR_PTR(-EINVAL);
+ kref_get(&adapter->ref);
+
+ port = zfcp_get_port_by_wwpn(adapter, wwpn);
+ if (port) {
+ put_device(&port->sysfs_device);
+ retval = -EEXIST;
+ goto err_out;
}
- read_unlock_irq(&zfcp_data.config_lock);
port = kzalloc(sizeof(struct zfcp_port), GFP_KERNEL);
if (!port)
- return ERR_PTR(-ENOMEM);
+ goto err_out;
- init_waitqueue_head(&port->remove_wq);
- INIT_LIST_HEAD(&port->unit_list_head);
+ rwlock_init(&port->unit_list_lock);
+ INIT_LIST_HEAD(&port->unit_list);
+
INIT_WORK(&port->gid_pn_work, zfcp_fc_port_did_lookup);
INIT_WORK(&port->test_link_work, zfcp_fc_link_test_work);
INIT_WORK(&port->rport_work, zfcp_scsi_rport_work);
@@ -671,58 +689,38 @@
port->d_id = d_id;
port->wwpn = wwpn;
port->rport_task = RPORT_NONE;
-
- /* mark port unusable as long as sysfs registration is not complete */
- atomic_set_mask(status | ZFCP_STATUS_COMMON_REMOVE, &port->status);
- atomic_set(&port->refcount, 0);
+ port->sysfs_device.parent = &adapter->ccw_device->dev;
+ port->sysfs_device.release = zfcp_port_release;
if (dev_set_name(&port->sysfs_device, "0x%016llx",
(unsigned long long)wwpn)) {
kfree(port);
- return ERR_PTR(-ENOMEM);
+ goto err_out;
}
- port->sysfs_device.parent = &adapter->ccw_device->dev;
- port->sysfs_device.release = zfcp_sysfs_port_release;
- dev_set_drvdata(&port->sysfs_device, port);
+ retval = -EINVAL;
if (device_register(&port->sysfs_device)) {
put_device(&port->sysfs_device);
- return ERR_PTR(-EINVAL);
+ goto err_out;
}
if (sysfs_create_group(&port->sysfs_device.kobj,
- &zfcp_sysfs_port_attrs)) {
- device_unregister(&port->sysfs_device);
- return ERR_PTR(-EINVAL);
- }
+ &zfcp_sysfs_port_attrs))
+ goto err_out_put;
- zfcp_port_get(port);
+ write_lock_irq(&adapter->port_list_lock);
+ list_add_tail(&port->list, &adapter->port_list);
+ write_unlock_irq(&adapter->port_list_lock);
- write_lock_irq(&zfcp_data.config_lock);
- list_add_tail(&port->list, &adapter->port_list_head);
- atomic_clear_mask(ZFCP_STATUS_COMMON_REMOVE, &port->status);
- atomic_set_mask(ZFCP_STATUS_COMMON_RUNNING, &port->status);
+ atomic_set_mask(status | ZFCP_STATUS_COMMON_RUNNING, &port->status);
- write_unlock_irq(&zfcp_data.config_lock);
-
- zfcp_adapter_get(adapter);
return port;
-}
-/**
- * zfcp_port_dequeue - dequeues a port from the port list of the adapter
- * @port: pointer to struct zfcp_port which should be removed
- */
-void zfcp_port_dequeue(struct zfcp_port *port)
-{
- write_lock_irq(&zfcp_data.config_lock);
- list_del(&port->list);
- write_unlock_irq(&zfcp_data.config_lock);
- wait_event(port->remove_wq, atomic_read(&port->refcount) == 0);
- cancel_work_sync(&port->rport_work); /* usually not necessary */
- zfcp_adapter_put(port->adapter);
- sysfs_remove_group(&port->sysfs_device.kobj, &zfcp_sysfs_port_attrs);
+err_out_put:
device_unregister(&port->sysfs_device);
+err_out:
+ zfcp_ccw_adapter_put(adapter);
+ return ERR_PTR(retval);
}
/**
diff --git a/drivers/s390/scsi/zfcp_ccw.c b/drivers/s390/scsi/zfcp_ccw.c
index e083394..c22cb72 100644
--- a/drivers/s390/scsi/zfcp_ccw.c
+++ b/drivers/s390/scsi/zfcp_ccw.c
@@ -13,28 +13,34 @@
#define ZFCP_MODEL_PRIV 0x4
-static int zfcp_ccw_suspend(struct ccw_device *cdev)
+static DEFINE_SPINLOCK(zfcp_ccw_adapter_ref_lock);
+struct zfcp_adapter *zfcp_ccw_adapter_by_cdev(struct ccw_device *cdev)
{
- struct zfcp_adapter *adapter = dev_get_drvdata(&cdev->dev);
+ struct zfcp_adapter *adapter;
+ unsigned long flags;
- if (!adapter)
- return 0;
+ spin_lock_irqsave(&zfcp_ccw_adapter_ref_lock, flags);
+ adapter = dev_get_drvdata(&cdev->dev);
+ if (adapter)
+ kref_get(&adapter->ref);
+ spin_unlock_irqrestore(&zfcp_ccw_adapter_ref_lock, flags);
+ return adapter;
+}
- mutex_lock(&zfcp_data.config_mutex);
+void zfcp_ccw_adapter_put(struct zfcp_adapter *adapter)
+{
+ unsigned long flags;
- zfcp_erp_adapter_shutdown(adapter, 0, "ccsusp1", NULL);
- zfcp_erp_wait(adapter);
-
- mutex_unlock(&zfcp_data.config_mutex);
-
- return 0;
+ spin_lock_irqsave(&zfcp_ccw_adapter_ref_lock, flags);
+ kref_put(&adapter->ref, zfcp_adapter_release);
+ spin_unlock_irqrestore(&zfcp_ccw_adapter_ref_lock, flags);
}
static int zfcp_ccw_activate(struct ccw_device *cdev)
{
- struct zfcp_adapter *adapter = dev_get_drvdata(&cdev->dev);
+ struct zfcp_adapter *adapter = zfcp_ccw_adapter_by_cdev(cdev);
if (!adapter)
return 0;
@@ -46,6 +52,8 @@
zfcp_erp_wait(adapter);
flush_work(&adapter->scan_work);
+ zfcp_ccw_adapter_put(adapter);
+
return 0;
}
@@ -67,28 +75,28 @@
/**
* zfcp_ccw_probe - probe function of zfcp driver
- * @ccw_device: pointer to belonging ccw device
+ * @cdev: pointer to belonging ccw device
*
* This function gets called by the common i/o layer for each FCP
* device found on the current system. This is only a stub to make cio
* work: To only allocate adapter resources for devices actually used,
* the allocation is deferred to the first call to ccw_set_online.
*/
-static int zfcp_ccw_probe(struct ccw_device *ccw_device)
+static int zfcp_ccw_probe(struct ccw_device *cdev)
{
return 0;
}
/**
* zfcp_ccw_remove - remove function of zfcp driver
- * @ccw_device: pointer to belonging ccw device
+ * @cdev: pointer to belonging ccw device
*
* This function gets called by the common i/o layer and removes an adapter
* from the system. Task of this function is to get rid of all units and
* ports that belong to this adapter. And in addition all resources of this
* adapter will be freed too.
*/
-static void zfcp_ccw_remove(struct ccw_device *ccw_device)
+static void zfcp_ccw_remove(struct ccw_device *cdev)
{
struct zfcp_adapter *adapter;
struct zfcp_port *port, *p;
@@ -96,49 +104,37 @@
LIST_HEAD(unit_remove_lh);
LIST_HEAD(port_remove_lh);
- ccw_device_set_offline(ccw_device);
+ ccw_device_set_offline(cdev);
- mutex_lock(&zfcp_data.config_mutex);
- adapter = dev_get_drvdata(&ccw_device->dev);
+ adapter = zfcp_ccw_adapter_by_cdev(cdev);
if (!adapter)
- goto out;
- mutex_unlock(&zfcp_data.config_mutex);
+ return;
- cancel_work_sync(&adapter->scan_work);
-
- mutex_lock(&zfcp_data.config_mutex);
-
- /* this also removes the scsi devices, so call it first */
- zfcp_adapter_scsi_unregister(adapter);
-
- write_lock_irq(&zfcp_data.config_lock);
- list_for_each_entry_safe(port, p, &adapter->port_list_head, list) {
- list_for_each_entry_safe(unit, u, &port->unit_list_head, list) {
+ write_lock_irq(&adapter->port_list_lock);
+ list_for_each_entry_safe(port, p, &adapter->port_list, list) {
+ write_lock(&port->unit_list_lock);
+ list_for_each_entry_safe(unit, u, &port->unit_list, list)
list_move(&unit->list, &unit_remove_lh);
- atomic_set_mask(ZFCP_STATUS_COMMON_REMOVE,
- &unit->status);
- }
+ write_unlock(&port->unit_list_lock);
list_move(&port->list, &port_remove_lh);
- atomic_set_mask(ZFCP_STATUS_COMMON_REMOVE, &port->status);
}
- atomic_set_mask(ZFCP_STATUS_COMMON_REMOVE, &adapter->status);
- write_unlock_irq(&zfcp_data.config_lock);
+ write_unlock_irq(&adapter->port_list_lock);
+ zfcp_ccw_adapter_put(adapter); /* put from zfcp_ccw_adapter_by_cdev */
- list_for_each_entry_safe(port, p, &port_remove_lh, list) {
- list_for_each_entry_safe(unit, u, &unit_remove_lh, list)
- zfcp_unit_dequeue(unit);
- zfcp_port_dequeue(port);
- }
- wait_event(adapter->remove_wq, atomic_read(&adapter->refcount) == 0);
- zfcp_adapter_dequeue(adapter);
+ list_for_each_entry_safe(unit, u, &unit_remove_lh, list)
+ zfcp_device_unregister(&unit->sysfs_device,
+ &zfcp_sysfs_unit_attrs);
-out:
- mutex_unlock(&zfcp_data.config_mutex);
+ list_for_each_entry_safe(port, p, &port_remove_lh, list)
+ zfcp_device_unregister(&port->sysfs_device,
+ &zfcp_sysfs_port_attrs);
+
+ zfcp_adapter_unregister(adapter);
}
/**
* zfcp_ccw_set_online - set_online function of zfcp driver
- * @ccw_device: pointer to belonging ccw device
+ * @cdev: pointer to belonging ccw device
*
* This function gets called by the common i/o layer and sets an
* adapter into state online. The first call will allocate all
@@ -149,23 +145,20 @@
* the SCSI stack, that the QDIO queues will be set up and that the
* adapter will be opened.
*/
-static int zfcp_ccw_set_online(struct ccw_device *ccw_device)
+static int zfcp_ccw_set_online(struct ccw_device *cdev)
{
- struct zfcp_adapter *adapter;
- int ret = 0;
-
- mutex_lock(&zfcp_data.config_mutex);
- adapter = dev_get_drvdata(&ccw_device->dev);
+ struct zfcp_adapter *adapter = zfcp_ccw_adapter_by_cdev(cdev);
if (!adapter) {
- ret = zfcp_adapter_enqueue(ccw_device);
- if (ret) {
- dev_err(&ccw_device->dev,
+ adapter = zfcp_adapter_enqueue(cdev);
+
+ if (IS_ERR(adapter)) {
+ dev_err(&cdev->dev,
"Setting up data structures for the "
"FCP adapter failed\n");
- goto out;
+ return PTR_ERR(adapter);
}
- adapter = dev_get_drvdata(&ccw_device->dev);
+ kref_get(&adapter->ref);
}
/* initialize request counter */
@@ -177,58 +170,61 @@
zfcp_erp_adapter_reopen(adapter, ZFCP_STATUS_COMMON_ERP_FAILED,
"ccsonl2", NULL);
zfcp_erp_wait(adapter);
-out:
- mutex_unlock(&zfcp_data.config_mutex);
- if (!ret)
- flush_work(&adapter->scan_work);
- return ret;
+
+ flush_work(&adapter->scan_work);
+
+ zfcp_ccw_adapter_put(adapter);
+ return 0;
}
/**
* zfcp_ccw_set_offline - set_offline function of zfcp driver
- * @ccw_device: pointer to belonging ccw device
+ * @cdev: pointer to belonging ccw device
*
* This function gets called by the common i/o layer and sets an adapter
* into state offline.
*/
-static int zfcp_ccw_set_offline(struct ccw_device *ccw_device)
+static int zfcp_ccw_set_offline(struct ccw_device *cdev)
{
- struct zfcp_adapter *adapter;
+ struct zfcp_adapter *adapter = zfcp_ccw_adapter_by_cdev(cdev);
- mutex_lock(&zfcp_data.config_mutex);
- adapter = dev_get_drvdata(&ccw_device->dev);
+ if (!adapter)
+ return 0;
+
zfcp_erp_adapter_shutdown(adapter, 0, "ccsoff1", NULL);
zfcp_erp_wait(adapter);
- mutex_unlock(&zfcp_data.config_mutex);
+
+ zfcp_ccw_adapter_put(adapter);
return 0;
}
/**
* zfcp_ccw_notify - ccw notify function
- * @ccw_device: pointer to belonging ccw device
+ * @cdev: pointer to belonging ccw device
* @event: indicates if adapter was detached or attached
*
* This function gets called by the common i/o layer if an adapter has gone
* or reappeared.
*/
-static int zfcp_ccw_notify(struct ccw_device *ccw_device, int event)
+static int zfcp_ccw_notify(struct ccw_device *cdev, int event)
{
- struct zfcp_adapter *adapter = dev_get_drvdata(&ccw_device->dev);
+ struct zfcp_adapter *adapter = zfcp_ccw_adapter_by_cdev(cdev);
+
+ if (!adapter)
+ return 1;
switch (event) {
case CIO_GONE:
- dev_warn(&adapter->ccw_device->dev,
- "The FCP device has been detached\n");
+ dev_warn(&cdev->dev, "The FCP device has been detached\n");
zfcp_erp_adapter_shutdown(adapter, 0, "ccnoti1", NULL);
break;
case CIO_NO_PATH:
- dev_warn(&adapter->ccw_device->dev,
+ dev_warn(&cdev->dev,
"The CHPID for the FCP device is offline\n");
zfcp_erp_adapter_shutdown(adapter, 0, "ccnoti2", NULL);
break;
case CIO_OPER:
- dev_info(&adapter->ccw_device->dev,
- "The FCP device is operational again\n");
+ dev_info(&cdev->dev, "The FCP device is operational again\n");
zfcp_erp_modify_adapter_status(adapter, "ccnoti3", NULL,
ZFCP_STATUS_COMMON_RUNNING,
ZFCP_SET);
@@ -236,11 +232,13 @@
"ccnoti4", NULL);
break;
case CIO_BOXED:
- dev_warn(&adapter->ccw_device->dev, "The FCP device "
- "did not respond within the specified time\n");
+ dev_warn(&cdev->dev, "The FCP device did not respond within "
+ "the specified time\n");
zfcp_erp_adapter_shutdown(adapter, 0, "ccnoti5", NULL);
break;
}
+
+ zfcp_ccw_adapter_put(adapter);
return 1;
}
@@ -250,18 +248,16 @@
*/
static void zfcp_ccw_shutdown(struct ccw_device *cdev)
{
- struct zfcp_adapter *adapter;
+ struct zfcp_adapter *adapter = zfcp_ccw_adapter_by_cdev(cdev);
- mutex_lock(&zfcp_data.config_mutex);
- adapter = dev_get_drvdata(&cdev->dev);
if (!adapter)
- goto out;
+ return;
zfcp_erp_adapter_shutdown(adapter, 0, "ccshut1", NULL);
zfcp_erp_wait(adapter);
zfcp_erp_thread_kill(adapter);
-out:
- mutex_unlock(&zfcp_data.config_mutex);
+
+ zfcp_ccw_adapter_put(adapter);
}
struct ccw_driver zfcp_ccw_driver = {
@@ -274,18 +270,7 @@
.set_offline = zfcp_ccw_set_offline,
.notify = zfcp_ccw_notify,
.shutdown = zfcp_ccw_shutdown,
- .freeze = zfcp_ccw_suspend,
+ .freeze = zfcp_ccw_set_offline,
.thaw = zfcp_ccw_activate,
.restore = zfcp_ccw_activate,
};
-
-/**
- * zfcp_ccw_register - ccw register function
- *
- * Registers the driver at the common i/o layer. This function will be called
- * at module load time/system start.
- */
-int __init zfcp_ccw_register(void)
-{
- return ccw_driver_register(&zfcp_ccw_driver);
-}
diff --git a/drivers/s390/scsi/zfcp_cfdc.c b/drivers/s390/scsi/zfcp_cfdc.c
index ef681df..f932400 100644
--- a/drivers/s390/scsi/zfcp_cfdc.c
+++ b/drivers/s390/scsi/zfcp_cfdc.c
@@ -86,22 +86,17 @@
static struct zfcp_adapter *zfcp_cfdc_get_adapter(u32 devno)
{
char busid[9];
- struct ccw_device *ccwdev;
- struct zfcp_adapter *adapter = NULL;
+ struct ccw_device *cdev;
+ struct zfcp_adapter *adapter;
snprintf(busid, sizeof(busid), "0.0.%04x", devno);
- ccwdev = get_ccwdev_by_busid(&zfcp_ccw_driver, busid);
- if (!ccwdev)
- goto out;
+ cdev = get_ccwdev_by_busid(&zfcp_ccw_driver, busid);
+ if (!cdev)
+ return NULL;
- adapter = dev_get_drvdata(&ccwdev->dev);
- if (!adapter)
- goto out_put;
+ adapter = zfcp_ccw_adapter_by_cdev(cdev);
- zfcp_adapter_get(adapter);
-out_put:
- put_device(&ccwdev->dev);
-out:
+ put_device(&cdev->dev);
return adapter;
}
@@ -212,7 +207,6 @@
retval = -ENXIO;
goto free_buffer;
}
- zfcp_adapter_get(adapter);
retval = zfcp_cfdc_sg_setup(data->command, fsf_cfdc->sg,
data_user->control_file);
@@ -245,7 +239,7 @@
free_sg:
zfcp_sg_free_table(fsf_cfdc->sg, ZFCP_CFDC_PAGES);
adapter_put:
- zfcp_adapter_put(adapter);
+ zfcp_ccw_adapter_put(adapter);
free_buffer:
kfree(data);
no_mem_sense:
diff --git a/drivers/s390/scsi/zfcp_dbf.c b/drivers/s390/scsi/zfcp_dbf.c
index 215b707..8445095 100644
--- a/drivers/s390/scsi/zfcp_dbf.c
+++ b/drivers/s390/scsi/zfcp_dbf.c
@@ -13,6 +13,7 @@
#include <asm/debug.h>
#include "zfcp_dbf.h"
#include "zfcp_ext.h"
+#include "zfcp_fc.h"
static u32 dbfsize = 4;
@@ -177,8 +178,7 @@
case FSF_QTCB_SEND_ELS:
send_els = (struct zfcp_send_els *)fsf_req->data;
- response->u.els.d_id = qtcb->bottom.support.d_id;
- response->u.els.ls_code = send_els->ls_code >> 24;
+ response->u.els.d_id = ntoh24(qtcb->bottom.support.d_id);
break;
case FSF_QTCB_ABORT_FCP_CMND:
@@ -348,7 +348,6 @@
case FSF_QTCB_SEND_ELS:
zfcp_dbf_out(p, "d_id", "0x%06x", r->u.els.d_id);
- zfcp_dbf_out(p, "ls_code", "0x%02x", r->u.els.ls_code);
break;
case FSF_QTCB_ABORT_FCP_CMND:
@@ -677,14 +676,14 @@
/**
* zfcp_dbf_san_ct_request - trace event for issued CT request
* @fsf_req: request containing issued CT data
+ * @d_id: destination id where ct request is sent to
*/
-void zfcp_dbf_san_ct_request(struct zfcp_fsf_req *fsf_req)
+void zfcp_dbf_san_ct_request(struct zfcp_fsf_req *fsf_req, u32 d_id)
{
- struct zfcp_send_ct *ct = (struct zfcp_send_ct *)fsf_req->data;
- struct zfcp_wka_port *wka_port = ct->wka_port;
- struct zfcp_adapter *adapter = wka_port->adapter;
+ struct zfcp_fsf_ct_els *ct = (struct zfcp_fsf_ct_els *)fsf_req->data;
+ struct zfcp_adapter *adapter = fsf_req->adapter;
struct zfcp_dbf *dbf = adapter->dbf;
- struct ct_hdr *hdr = sg_virt(ct->req);
+ struct fc_ct_hdr *hdr = sg_virt(ct->req);
struct zfcp_dbf_san_record *r = &dbf->san_buf;
struct zfcp_dbf_san_record_ct_request *oct = &r->u.ct_req;
int level = 3;
@@ -695,19 +694,18 @@
strncpy(r->tag, "octc", ZFCP_DBF_TAG_SIZE);
r->fsf_reqid = fsf_req->req_id;
r->fsf_seqno = fsf_req->seq_no;
- r->s_id = fc_host_port_id(adapter->scsi_host);
- r->d_id = wka_port->d_id;
- oct->cmd_req_code = hdr->cmd_rsp_code;
- oct->revision = hdr->revision;
- oct->gs_type = hdr->gs_type;
- oct->gs_subtype = hdr->gs_subtype;
- oct->options = hdr->options;
- oct->max_res_size = hdr->max_res_size;
- oct->len = min((int)ct->req->length - (int)sizeof(struct ct_hdr),
+ oct->d_id = d_id;
+ oct->cmd_req_code = hdr->ct_cmd;
+ oct->revision = hdr->ct_rev;
+ oct->gs_type = hdr->ct_fs_type;
+ oct->gs_subtype = hdr->ct_fs_subtype;
+ oct->options = hdr->ct_options;
+ oct->max_res_size = hdr->ct_mr_size;
+ oct->len = min((int)ct->req->length - (int)sizeof(struct fc_ct_hdr),
ZFCP_DBF_SAN_MAX_PAYLOAD);
debug_event(dbf->san, level, r, sizeof(*r));
zfcp_dbf_hexdump(dbf->san, r, sizeof(*r), level,
- (void *)hdr + sizeof(struct ct_hdr), oct->len);
+ (void *)hdr + sizeof(struct fc_ct_hdr), oct->len);
spin_unlock_irqrestore(&dbf->san_lock, flags);
}
@@ -717,10 +715,9 @@
*/
void zfcp_dbf_san_ct_response(struct zfcp_fsf_req *fsf_req)
{
- struct zfcp_send_ct *ct = (struct zfcp_send_ct *)fsf_req->data;
- struct zfcp_wka_port *wka_port = ct->wka_port;
- struct zfcp_adapter *adapter = wka_port->adapter;
- struct ct_hdr *hdr = sg_virt(ct->resp);
+ struct zfcp_fsf_ct_els *ct = (struct zfcp_fsf_ct_els *)fsf_req->data;
+ struct zfcp_adapter *adapter = fsf_req->adapter;
+ struct fc_ct_hdr *hdr = sg_virt(ct->resp);
struct zfcp_dbf *dbf = adapter->dbf;
struct zfcp_dbf_san_record *r = &dbf->san_buf;
struct zfcp_dbf_san_record_ct_response *rct = &r->u.ct_resp;
@@ -732,25 +729,23 @@
strncpy(r->tag, "rctc", ZFCP_DBF_TAG_SIZE);
r->fsf_reqid = fsf_req->req_id;
r->fsf_seqno = fsf_req->seq_no;
- r->s_id = wka_port->d_id;
- r->d_id = fc_host_port_id(adapter->scsi_host);
- rct->cmd_rsp_code = hdr->cmd_rsp_code;
- rct->revision = hdr->revision;
- rct->reason_code = hdr->reason_code;
- rct->expl = hdr->reason_code_expl;
- rct->vendor_unique = hdr->vendor_unique;
- rct->max_res_size = hdr->max_res_size;
- rct->len = min((int)ct->resp->length - (int)sizeof(struct ct_hdr),
+ rct->cmd_rsp_code = hdr->ct_cmd;
+ rct->revision = hdr->ct_rev;
+ rct->reason_code = hdr->ct_reason;
+ rct->expl = hdr->ct_explan;
+ rct->vendor_unique = hdr->ct_vendor;
+ rct->max_res_size = hdr->ct_mr_size;
+ rct->len = min((int)ct->resp->length - (int)sizeof(struct fc_ct_hdr),
ZFCP_DBF_SAN_MAX_PAYLOAD);
debug_event(dbf->san, level, r, sizeof(*r));
zfcp_dbf_hexdump(dbf->san, r, sizeof(*r), level,
- (void *)hdr + sizeof(struct ct_hdr), rct->len);
+ (void *)hdr + sizeof(struct fc_ct_hdr), rct->len);
spin_unlock_irqrestore(&dbf->san_lock, flags);
}
static void zfcp_dbf_san_els(const char *tag, int level,
- struct zfcp_fsf_req *fsf_req, u32 s_id, u32 d_id,
- u8 ls_code, void *buffer, int buflen)
+ struct zfcp_fsf_req *fsf_req, u32 d_id,
+ void *buffer, int buflen)
{
struct zfcp_adapter *adapter = fsf_req->adapter;
struct zfcp_dbf *dbf = adapter->dbf;
@@ -762,9 +757,7 @@
strncpy(rec->tag, tag, ZFCP_DBF_TAG_SIZE);
rec->fsf_reqid = fsf_req->req_id;
rec->fsf_seqno = fsf_req->seq_no;
- rec->s_id = s_id;
- rec->d_id = d_id;
- rec->u.els.ls_code = ls_code;
+ rec->u.els.d_id = d_id;
debug_event(dbf->san, level, rec, sizeof(*rec));
zfcp_dbf_hexdump(dbf->san, rec, sizeof(*rec), level,
buffer, min(buflen, ZFCP_DBF_SAN_MAX_PAYLOAD));
@@ -777,12 +770,11 @@
*/
void zfcp_dbf_san_els_request(struct zfcp_fsf_req *fsf_req)
{
- struct zfcp_send_els *els = (struct zfcp_send_els *)fsf_req->data;
+ struct zfcp_fsf_ct_els *els = (struct zfcp_fsf_ct_els *)fsf_req->data;
+ u32 d_id = ntoh24(fsf_req->qtcb->bottom.support.d_id);
- zfcp_dbf_san_els("oels", 2, fsf_req,
- fc_host_port_id(els->adapter->scsi_host),
- els->d_id, *(u8 *) sg_virt(els->req),
- sg_virt(els->req), els->req->length);
+ zfcp_dbf_san_els("oels", 2, fsf_req, d_id,
+ sg_virt(els->req), els->req->length);
}
/**
@@ -791,12 +783,11 @@
*/
void zfcp_dbf_san_els_response(struct zfcp_fsf_req *fsf_req)
{
- struct zfcp_send_els *els = (struct zfcp_send_els *)fsf_req->data;
+ struct zfcp_fsf_ct_els *els = (struct zfcp_fsf_ct_els *)fsf_req->data;
+ u32 d_id = ntoh24(fsf_req->qtcb->bottom.support.d_id);
- zfcp_dbf_san_els("rels", 2, fsf_req, els->d_id,
- fc_host_port_id(els->adapter->scsi_host),
- *(u8 *)sg_virt(els->req), sg_virt(els->resp),
- els->resp->length);
+ zfcp_dbf_san_els("rels", 2, fsf_req, d_id,
+ sg_virt(els->resp), els->resp->length);
}
/**
@@ -805,16 +796,13 @@
*/
void zfcp_dbf_san_incoming_els(struct zfcp_fsf_req *fsf_req)
{
- struct zfcp_adapter *adapter = fsf_req->adapter;
struct fsf_status_read_buffer *buf =
(struct fsf_status_read_buffer *)fsf_req->data;
int length = (int)buf->length -
(int)((void *)&buf->payload - (void *)buf);
- zfcp_dbf_san_els("iels", 1, fsf_req, buf->d_id,
- fc_host_port_id(adapter->scsi_host),
- buf->payload.data[0], (void *)buf->payload.data,
- length);
+ zfcp_dbf_san_els("iels", 1, fsf_req, ntoh24(buf->d_id),
+ (void *)buf->payload.data, length);
}
static int zfcp_dbf_san_view_format(debug_info_t *id, struct debug_view *view,
@@ -829,11 +817,10 @@
zfcp_dbf_tag(&p, "tag", r->tag);
zfcp_dbf_out(&p, "fsf_reqid", "0x%0Lx", r->fsf_reqid);
zfcp_dbf_out(&p, "fsf_seqno", "0x%08x", r->fsf_seqno);
- zfcp_dbf_out(&p, "s_id", "0x%06x", r->s_id);
- zfcp_dbf_out(&p, "d_id", "0x%06x", r->d_id);
if (strncmp(r->tag, "octc", ZFCP_DBF_TAG_SIZE) == 0) {
struct zfcp_dbf_san_record_ct_request *ct = &r->u.ct_req;
+ zfcp_dbf_out(&p, "d_id", "0x%06x", ct->d_id);
zfcp_dbf_out(&p, "cmd_req_code", "0x%04x", ct->cmd_req_code);
zfcp_dbf_out(&p, "revision", "0x%02x", ct->revision);
zfcp_dbf_out(&p, "gs_type", "0x%02x", ct->gs_type);
@@ -852,7 +839,7 @@
strncmp(r->tag, "rels", ZFCP_DBF_TAG_SIZE) == 0 ||
strncmp(r->tag, "iels", ZFCP_DBF_TAG_SIZE) == 0) {
struct zfcp_dbf_san_record_els *els = &r->u.els;
- zfcp_dbf_out(&p, "ls_code", "0x%02x", els->ls_code);
+ zfcp_dbf_out(&p, "d_id", "0x%06x", els->d_id);
}
return p - out_buf;
}
@@ -870,8 +857,9 @@
struct zfcp_dbf_scsi_record *rec = &dbf->scsi_buf;
struct zfcp_dbf_dump *dump = (struct zfcp_dbf_dump *)rec;
unsigned long flags;
- struct fcp_rsp_iu *fcp_rsp;
- char *fcp_rsp_info = NULL, *fcp_sns_info = NULL;
+ struct fcp_resp_with_ext *fcp_rsp;
+ struct fcp_resp_rsp_info *fcp_rsp_info = NULL;
+ char *fcp_sns_info = NULL;
int offset = 0, buflen = 0;
spin_lock_irqsave(&dbf->scsi_lock, flags);
@@ -895,20 +883,22 @@
rec->scsi_allowed = scsi_cmnd->allowed;
}
if (fsf_req != NULL) {
- fcp_rsp = (struct fcp_rsp_iu *)
- &(fsf_req->qtcb->bottom.io.fcp_rsp);
- fcp_rsp_info = (unsigned char *) &fcp_rsp[1];
- fcp_sns_info =
- zfcp_get_fcp_sns_info_ptr(fcp_rsp);
+ fcp_rsp = (struct fcp_resp_with_ext *)
+ &(fsf_req->qtcb->bottom.io.fcp_rsp);
+ fcp_rsp_info = (struct fcp_resp_rsp_info *)
+ &fcp_rsp[1];
+ fcp_sns_info = (char *) &fcp_rsp[1];
+ if (fcp_rsp->resp.fr_flags & FCP_RSP_LEN_VAL)
+ fcp_sns_info += fcp_rsp->ext.fr_sns_len;
- rec->rsp_validity = fcp_rsp->validity.value;
- rec->rsp_scsi_status = fcp_rsp->scsi_status;
- rec->rsp_resid = fcp_rsp->fcp_resid;
- if (fcp_rsp->validity.bits.fcp_rsp_len_valid)
- rec->rsp_code = *(fcp_rsp_info + 3);
- if (fcp_rsp->validity.bits.fcp_sns_len_valid) {
- buflen = min((int)fcp_rsp->fcp_sns_len,
- ZFCP_DBF_SCSI_MAX_FCP_SNS_INFO);
+ rec->rsp_validity = fcp_rsp->resp.fr_flags;
+ rec->rsp_scsi_status = fcp_rsp->resp.fr_status;
+ rec->rsp_resid = fcp_rsp->ext.fr_resid;
+ if (fcp_rsp->resp.fr_flags & FCP_RSP_LEN_VAL)
+ rec->rsp_code = fcp_rsp_info->rsp_code;
+ if (fcp_rsp->resp.fr_flags & FCP_SNS_LEN_VAL) {
+ buflen = min(fcp_rsp->ext.fr_sns_len,
+ (u32)ZFCP_DBF_SCSI_MAX_FCP_SNS_INFO);
rec->sns_info_len = buflen;
memcpy(rec->sns_info, fcp_sns_info,
min(buflen,
@@ -1067,6 +1057,8 @@
*/
void zfcp_dbf_adapter_unregister(struct zfcp_dbf *dbf)
{
+ if (!dbf)
+ return;
debug_unregister(dbf->scsi);
debug_unregister(dbf->san);
debug_unregister(dbf->hba);
diff --git a/drivers/s390/scsi/zfcp_dbf.h b/drivers/s390/scsi/zfcp_dbf.h
index 6b1461e..8b7fd9a 100644
--- a/drivers/s390/scsi/zfcp_dbf.h
+++ b/drivers/s390/scsi/zfcp_dbf.h
@@ -22,6 +22,7 @@
#ifndef ZFCP_DBF_H
#define ZFCP_DBF_H
+#include <scsi/fc/fc_fcp.h>
#include "zfcp_ext.h"
#include "zfcp_fsf.h"
#include "zfcp_def.h"
@@ -122,7 +123,6 @@
} unit;
struct {
u32 d_id;
- u8 ls_code;
} els;
} u;
} __attribute__ ((packed));
@@ -166,6 +166,7 @@
u8 options;
u16 max_res_size;
u32 len;
+ u32 d_id;
} __attribute__ ((packed));
struct zfcp_dbf_san_record_ct_response {
@@ -179,16 +180,13 @@
} __attribute__ ((packed));
struct zfcp_dbf_san_record_els {
- u8 ls_code;
- u32 len;
+ u32 d_id;
} __attribute__ ((packed));
struct zfcp_dbf_san_record {
u8 tag[ZFCP_DBF_TAG_SIZE];
u64 fsf_reqid;
u32 fsf_seqno;
- u32 s_id;
- u32 d_id;
union {
struct zfcp_dbf_san_record_ct_request ct_req;
struct zfcp_dbf_san_record_ct_response ct_resp;
@@ -343,7 +341,7 @@
void zfcp_dbf_scsi_devreset(const char *tag, u8 flag, struct zfcp_unit *unit,
struct scsi_cmnd *scsi_cmnd)
{
- zfcp_dbf_scsi(flag == FCP_TARGET_RESET ? "trst" : "lrst", tag, 1,
+ zfcp_dbf_scsi(flag == FCP_TMF_TGT_RESET ? "trst" : "lrst", tag, 1,
unit->port->adapter->dbf, scsi_cmnd, NULL, 0);
}
diff --git a/drivers/s390/scsi/zfcp_def.h b/drivers/s390/scsi/zfcp_def.h
index 7da2fad..e1b5b88 100644
--- a/drivers/s390/scsi/zfcp_def.h
+++ b/drivers/s390/scsi/zfcp_def.h
@@ -71,131 +71,6 @@
/* timeout value for "default timer" for fsf requests */
#define ZFCP_FSF_REQUEST_TIMEOUT (60*HZ)
-/*************** FIBRE CHANNEL PROTOCOL SPECIFIC DEFINES ********************/
-
-/* task attribute values in FCP-2 FCP_CMND IU */
-#define SIMPLE_Q 0
-#define HEAD_OF_Q 1
-#define ORDERED_Q 2
-#define ACA_Q 4
-#define UNTAGGED 5
-
-/* task management flags in FCP-2 FCP_CMND IU */
-#define FCP_CLEAR_ACA 0x40
-#define FCP_TARGET_RESET 0x20
-#define FCP_LOGICAL_UNIT_RESET 0x10
-#define FCP_CLEAR_TASK_SET 0x04
-#define FCP_ABORT_TASK_SET 0x02
-
-#define FCP_CDB_LENGTH 16
-
-#define ZFCP_DID_MASK 0x00FFFFFF
-
-/* FCP(-2) FCP_CMND IU */
-struct fcp_cmnd_iu {
- u64 fcp_lun; /* FCP logical unit number */
- u8 crn; /* command reference number */
- u8 reserved0:5; /* reserved */
- u8 task_attribute:3; /* task attribute */
- u8 task_management_flags; /* task management flags */
- u8 add_fcp_cdb_length:6; /* additional FCP_CDB length */
- u8 rddata:1; /* read data */
- u8 wddata:1; /* write data */
- u8 fcp_cdb[FCP_CDB_LENGTH];
-} __attribute__((packed));
-
-/* FCP(-2) FCP_RSP IU */
-struct fcp_rsp_iu {
- u8 reserved0[10];
- union {
- struct {
- u8 reserved1:3;
- u8 fcp_conf_req:1;
- u8 fcp_resid_under:1;
- u8 fcp_resid_over:1;
- u8 fcp_sns_len_valid:1;
- u8 fcp_rsp_len_valid:1;
- } bits;
- u8 value;
- } validity;
- u8 scsi_status;
- u32 fcp_resid;
- u32 fcp_sns_len;
- u32 fcp_rsp_len;
-} __attribute__((packed));
-
-
-#define RSP_CODE_GOOD 0
-#define RSP_CODE_LENGTH_MISMATCH 1
-#define RSP_CODE_FIELD_INVALID 2
-#define RSP_CODE_RO_MISMATCH 3
-#define RSP_CODE_TASKMAN_UNSUPP 4
-#define RSP_CODE_TASKMAN_FAILED 5
-
-/* see fc-fs */
-#define LS_RSCN 0x61
-#define LS_LOGO 0x05
-#define LS_PLOGI 0x03
-
-struct fcp_rscn_head {
- u8 command;
- u8 page_length; /* always 0x04 */
- u16 payload_len;
-} __attribute__((packed));
-
-struct fcp_rscn_element {
- u8 reserved:2;
- u8 event_qual:4;
- u8 addr_format:2;
- u32 nport_did:24;
-} __attribute__((packed));
-
-/* see fc-ph */
-struct fcp_logo {
- u32 command;
- u32 nport_did;
- u64 nport_wwpn;
-} __attribute__((packed));
-
-/*
- * FC-FS stuff
- */
-#define R_A_TOV 10 /* seconds */
-
-#define ZFCP_LS_RLS 0x0f
-#define ZFCP_LS_ADISC 0x52
-#define ZFCP_LS_RPS 0x56
-#define ZFCP_LS_RSCN 0x61
-#define ZFCP_LS_RNID 0x78
-
-struct zfcp_ls_adisc {
- u8 code;
- u8 field[3];
- u32 hard_nport_id;
- u64 wwpn;
- u64 wwnn;
- u32 nport_id;
-} __attribute__ ((packed));
-
-/*
- * FC-GS-2 stuff
- */
-#define ZFCP_CT_REVISION 0x01
-#define ZFCP_CT_DIRECTORY_SERVICE 0xFC
-#define ZFCP_CT_NAME_SERVER 0x02
-#define ZFCP_CT_SYNCHRONOUS 0x00
-#define ZFCP_CT_SCSI_FCP 0x08
-#define ZFCP_CT_UNABLE_TO_PERFORM_CMD 0x09
-#define ZFCP_CT_GID_PN 0x0121
-#define ZFCP_CT_GPN_FT 0x0172
-#define ZFCP_CT_ACCEPT 0x8002
-#define ZFCP_CT_REJECT 0x8001
-
-/*
- * FC-GS-4 stuff
- */
-#define ZFCP_CT_TIMEOUT (3 * R_A_TOV)
-
/*************** ADAPTER/PORT/UNIT AND FSF_REQ STATUS FLAGS ******************/
/*
@@ -205,7 +80,6 @@
#define ZFCP_COMMON_FLAGS 0xfff00000
/* common status bits */
-#define ZFCP_STATUS_COMMON_REMOVE 0x80000000
#define ZFCP_STATUS_COMMON_RUNNING 0x40000000
#define ZFCP_STATUS_COMMON_ERP_FAILED 0x20000000
#define ZFCP_STATUS_COMMON_UNBLOCKED 0x10000000
@@ -222,21 +96,10 @@
#define ZFCP_STATUS_ADAPTER_ERP_PENDING 0x00000100
#define ZFCP_STATUS_ADAPTER_LINK_UNPLUGGED 0x00000200
-/* FC-PH/FC-GS well-known address identifiers for generic services */
-#define ZFCP_DID_WKA 0xFFFFF0
-
/* remote port status */
#define ZFCP_STATUS_PORT_PHYS_OPEN 0x00000001
#define ZFCP_STATUS_PORT_LINK_TEST 0x00000002
-/* well known address (WKA) port status*/
-enum zfcp_wka_status {
- ZFCP_WKA_PORT_OFFLINE,
- ZFCP_WKA_PORT_CLOSING,
- ZFCP_WKA_PORT_OPENING,
- ZFCP_WKA_PORT_ONLINE,
-};
-
/* logical unit status */
#define ZFCP_STATUS_UNIT_SHARED 0x00000004
#define ZFCP_STATUS_UNIT_READONLY 0x00000008
@@ -247,10 +110,7 @@
#define ZFCP_STATUS_FSFREQ_CLEANUP 0x00000010
#define ZFCP_STATUS_FSFREQ_ABORTSUCCEEDED 0x00000040
#define ZFCP_STATUS_FSFREQ_ABORTNOTNEEDED 0x00000080
-#define ZFCP_STATUS_FSFREQ_ABORTED 0x00000100
#define ZFCP_STATUS_FSFREQ_TMFUNCFAILED 0x00000200
-#define ZFCP_STATUS_FSFREQ_TMFUNCNOTSUPP 0x00000400
-#define ZFCP_STATUS_FSFREQ_RETRY 0x00000800
#define ZFCP_STATUS_FSFREQ_DISMISSED 0x00001000
/************************* STRUCTURE DEFINITIONS *****************************/
@@ -265,125 +125,10 @@
mempool_t *scsi_abort;
mempool_t *status_read_req;
mempool_t *status_read_data;
- mempool_t *gid_pn_data;
+ mempool_t *gid_pn;
mempool_t *qtcb_pool;
};
-/*
- * header for CT_IU
- */
-struct ct_hdr {
- u8 revision; // 0x01
- u8 in_id[3]; // 0x00
- u8 gs_type; // 0xFC Directory Service
- u8 gs_subtype; // 0x02 Name Server
- u8 options; // 0x00 single bidirectional exchange
- u8 reserved0;
- u16 cmd_rsp_code; // 0x0121 GID_PN, or 0x0100 GA_NXT
- u16 max_res_size; // <= (4096 - 16) / 4
- u8 reserved1;
- u8 reason_code;
- u8 reason_code_expl;
- u8 vendor_unique;
-} __attribute__ ((packed));
-
-/* nameserver request CT_IU -- for requests where
- * a port name is required */
-struct ct_iu_gid_pn_req {
- struct ct_hdr header;
- u64 wwpn;
-} __attribute__ ((packed));
-
-/* FS_ACC IU and data unit for GID_PN nameserver request */
-struct ct_iu_gid_pn_resp {
- struct ct_hdr header;
- u32 d_id;
-} __attribute__ ((packed));
-
-struct ct_iu_gpn_ft_req {
- struct ct_hdr header;
- u8 flags;
- u8 domain_id_scope;
- u8 area_id_scope;
- u8 fc4_type;
-} __attribute__ ((packed));
-
-
-/**
- * struct zfcp_send_ct - used to pass parameters to function zfcp_fsf_send_ct
- * @wka_port: port where the request is sent to
- * @req: scatter-gather list for request
- * @resp: scatter-gather list for response
- * @handler: handler function (called for response to the request)
- * @handler_data: data passed to handler function
- * @completion: completion for synchronization purposes
- * @status: used to pass error status to calling function
- */
-struct zfcp_send_ct {
- struct zfcp_wka_port *wka_port;
- struct scatterlist *req;
- struct scatterlist *resp;
- void (*handler)(unsigned long);
- unsigned long handler_data;
- struct completion *completion;
- int status;
-};
-
-/* used for name server requests in error recovery */
-struct zfcp_gid_pn_data {
- struct zfcp_send_ct ct;
- struct scatterlist req;
- struct scatterlist resp;
- struct ct_iu_gid_pn_req ct_iu_req;
- struct ct_iu_gid_pn_resp ct_iu_resp;
- struct zfcp_port *port;
-};
-
-/**
- * struct zfcp_send_els - used to pass parameters to function zfcp_fsf_send_els
- * @adapter: adapter where request is sent from
- * @port: port where ELS is destinated (port reference count has to be increased)
- * @d_id: destiniation id of port where request is sent to
- * @req: scatter-gather list for request
- * @resp: scatter-gather list for response
- * @handler: handler function (called for response to the request)
- * @handler_data: data passed to handler function
- * @completion: completion for synchronization purposes
- * @ls_code: hex code of ELS command
- * @status: used to pass error status to calling function
- */
-struct zfcp_send_els {
- struct zfcp_adapter *adapter;
- struct zfcp_port *port;
- u32 d_id;
- struct scatterlist *req;
- struct scatterlist *resp;
- void (*handler)(unsigned long);
- unsigned long handler_data;
- struct completion *completion;
- int ls_code;
- int status;
-};
-
-struct zfcp_wka_port {
- struct zfcp_adapter *adapter;
- wait_queue_head_t completion_wq;
- enum zfcp_wka_status status;
- atomic_t refcount;
- u32 d_id;
- u32 handle;
- struct mutex mutex;
- struct delayed_work work;
-};
-
-struct zfcp_wka_ports {
- struct zfcp_wka_port ms; /* management service */
- struct zfcp_wka_port ts; /* time service */
- struct zfcp_wka_port ds; /* directory service */
- struct zfcp_wka_port as; /* alias service */
- struct zfcp_wka_port ks; /* key distribution service */
-};
-
struct zfcp_qdio_queue {
struct qdio_buffer *sbal[QDIO_MAX_BUFFERS_PER_Q];
u8 first; /* index of next free bfr in queue */
@@ -446,9 +191,7 @@
};
struct zfcp_adapter {
- atomic_t refcount; /* reference count */
- wait_queue_head_t remove_wq; /* can be used to wait for
- refcount drop to zero */
+ struct kref ref;
u64 peer_wwnn; /* P2P peer WWNN */
u64 peer_wwpn; /* P2P peer WWPN */
u32 peer_d_id; /* P2P peer D_ID */
@@ -461,7 +204,8 @@
u32 hardware_version; /* of FCP channel */
u16 timer_ticks; /* time int for a tick */
struct Scsi_Host *scsi_host; /* Pointer to mid-layer */
- struct list_head port_list_head; /* remote port list */
+ struct list_head port_list; /* remote port list */
+ rwlock_t port_list_lock; /* port list lock */
unsigned long req_no; /* unique FSF req number */
struct list_head *req_list; /* list of pending reqs */
spinlock_t req_list_lock; /* request list lock */
@@ -485,7 +229,7 @@
u32 erp_low_mem_count; /* nr of erp actions waiting
for memory */
struct task_struct *erp_thread;
- struct zfcp_wka_ports *gs; /* generic services */
+ struct zfcp_fc_wka_ports *gs; /* generic services */
struct zfcp_dbf *dbf; /* debug traces */
struct zfcp_adapter_mempool pool; /* Adapter memory pools */
struct fc_host_statistics *fc_stats;
@@ -500,11 +244,9 @@
struct device sysfs_device; /* sysfs device */
struct fc_rport *rport; /* rport of fc transport class */
struct list_head list; /* list of remote ports */
- atomic_t refcount; /* reference count */
- wait_queue_head_t remove_wq; /* can be used to wait for
- refcount drop to zero */
struct zfcp_adapter *adapter; /* adapter used to access port */
- struct list_head unit_list_head; /* head of logical unit list */
+ struct list_head unit_list; /* head of logical unit list */
+ rwlock_t unit_list_lock; /* unit list lock */
atomic_t status; /* status of this remote port */
u64 wwnn; /* WWNN if known */
u64 wwpn; /* WWPN */
@@ -523,9 +265,6 @@
struct zfcp_unit {
struct device sysfs_device; /* sysfs device */
struct list_head list; /* list of logical units */
- atomic_t refcount; /* reference count */
- wait_queue_head_t remove_wq; /* can be used to wait for
- refcount drop to zero */
struct zfcp_port *port; /* remote port of unit */
atomic_t status; /* status of this logical unit */
u64 fcp_lun; /* own FCP_LUN */
@@ -601,14 +340,11 @@
struct zfcp_data {
struct scsi_host_template scsi_host_template;
struct scsi_transport_template *scsi_transport_template;
- rwlock_t config_lock; /* serialises changes
- to adapter/port/unit
- lists */
- struct mutex config_mutex;
struct kmem_cache *gpn_ft_cache;
struct kmem_cache *qtcb_cache;
struct kmem_cache *sr_buffer_cache;
struct kmem_cache *gid_pn_cache;
+ struct kmem_cache *adisc_cache;
};
/********************** ZFCP SPECIFIC DEFINES ********************************/
@@ -657,47 +393,4 @@
return NULL;
}
-/*
- * functions needed for reference/usage counting
- */
-
-static inline void
-zfcp_unit_get(struct zfcp_unit *unit)
-{
- atomic_inc(&unit->refcount);
-}
-
-static inline void
-zfcp_unit_put(struct zfcp_unit *unit)
-{
- if (atomic_dec_return(&unit->refcount) == 0)
- wake_up(&unit->remove_wq);
-}
-
-static inline void
-zfcp_port_get(struct zfcp_port *port)
-{
- atomic_inc(&port->refcount);
-}
-
-static inline void
-zfcp_port_put(struct zfcp_port *port)
-{
- if (atomic_dec_return(&port->refcount) == 0)
- wake_up(&port->remove_wq);
-}
-
-static inline void
-zfcp_adapter_get(struct zfcp_adapter *adapter)
-{
- atomic_inc(&adapter->refcount);
-}
-
-static inline void
-zfcp_adapter_put(struct zfcp_adapter *adapter)
-{
- if (atomic_dec_return(&adapter->refcount) == 0)
- wake_up(&adapter->remove_wq);
-}
-
#endif /* ZFCP_DEF_H */
diff --git a/drivers/s390/scsi/zfcp_erp.c b/drivers/s390/scsi/zfcp_erp.c
index f73e218..b51a11a 100644
--- a/drivers/s390/scsi/zfcp_erp.c
+++ b/drivers/s390/scsi/zfcp_erp.c
@@ -99,9 +99,12 @@
if (atomic_read(&port->status) & ZFCP_STATUS_COMMON_ERP_INUSE)
zfcp_erp_action_dismiss(&port->erp_action);
- else
- list_for_each_entry(unit, &port->unit_list_head, list)
- zfcp_erp_action_dismiss_unit(unit);
+ else {
+ read_lock(&port->unit_list_lock);
+ list_for_each_entry(unit, &port->unit_list, list)
+ zfcp_erp_action_dismiss_unit(unit);
+ read_unlock(&port->unit_list_lock);
+ }
}
static void zfcp_erp_action_dismiss_adapter(struct zfcp_adapter *adapter)
@@ -110,9 +113,12 @@
if (atomic_read(&adapter->status) & ZFCP_STATUS_COMMON_ERP_INUSE)
zfcp_erp_action_dismiss(&adapter->erp_action);
- else
- list_for_each_entry(port, &adapter->port_list_head, list)
+ else {
+ read_lock(&adapter->port_list_lock);
+ list_for_each_entry(port, &adapter->port_list, list)
zfcp_erp_action_dismiss_port(port);
+ read_unlock(&adapter->port_list_lock);
+ }
}
static int zfcp_erp_required_act(int want, struct zfcp_adapter *adapter,
@@ -168,7 +174,8 @@
switch (need) {
case ZFCP_ERP_ACTION_REOPEN_UNIT:
- zfcp_unit_get(unit);
+ if (!get_device(&unit->sysfs_device))
+ return NULL;
atomic_set_mask(ZFCP_STATUS_COMMON_ERP_INUSE, &unit->status);
erp_action = &unit->erp_action;
if (!(atomic_read(&unit->status) & ZFCP_STATUS_COMMON_RUNNING))
@@ -177,7 +184,8 @@
case ZFCP_ERP_ACTION_REOPEN_PORT:
case ZFCP_ERP_ACTION_REOPEN_PORT_FORCED:
- zfcp_port_get(port);
+ if (!get_device(&port->sysfs_device))
+ return NULL;
zfcp_erp_action_dismiss_port(port);
atomic_set_mask(ZFCP_STATUS_COMMON_ERP_INUSE, &port->status);
erp_action = &port->erp_action;
@@ -186,7 +194,7 @@
break;
case ZFCP_ERP_ACTION_REOPEN_ADAPTER:
- zfcp_adapter_get(adapter);
+ kref_get(&adapter->ref);
zfcp_erp_action_dismiss_adapter(adapter);
atomic_set_mask(ZFCP_STATUS_COMMON_ERP_INUSE, &adapter->status);
erp_action = &adapter->erp_action;
@@ -264,11 +272,16 @@
{
unsigned long flags;
- read_lock_irqsave(&zfcp_data.config_lock, flags);
- write_lock(&adapter->erp_lock);
- _zfcp_erp_adapter_reopen(adapter, clear, id, ref);
- write_unlock(&adapter->erp_lock);
- read_unlock_irqrestore(&zfcp_data.config_lock, flags);
+ zfcp_erp_adapter_block(adapter, clear);
+ zfcp_scsi_schedule_rports_block(adapter);
+
+ write_lock_irqsave(&adapter->erp_lock, flags);
+ if (atomic_read(&adapter->status) & ZFCP_STATUS_COMMON_ERP_FAILED)
+ zfcp_erp_adapter_failed(adapter, "erareo1", NULL);
+ else
+ zfcp_erp_action_enqueue(ZFCP_ERP_ACTION_REOPEN_ADAPTER, adapter,
+ NULL, NULL, id, ref);
+ write_unlock_irqrestore(&adapter->erp_lock, flags);
}
/**
@@ -345,11 +358,9 @@
unsigned long flags;
struct zfcp_adapter *adapter = port->adapter;
- read_lock_irqsave(&zfcp_data.config_lock, flags);
- write_lock(&adapter->erp_lock);
+ write_lock_irqsave(&adapter->erp_lock, flags);
_zfcp_erp_port_forced_reopen(port, clear, id, ref);
- write_unlock(&adapter->erp_lock);
- read_unlock_irqrestore(&zfcp_data.config_lock, flags);
+ write_unlock_irqrestore(&adapter->erp_lock, flags);
}
static int _zfcp_erp_port_reopen(struct zfcp_port *port, int clear, char *id,
@@ -377,15 +388,13 @@
*/
int zfcp_erp_port_reopen(struct zfcp_port *port, int clear, char *id, void *ref)
{
- unsigned long flags;
int retval;
+ unsigned long flags;
struct zfcp_adapter *adapter = port->adapter;
- read_lock_irqsave(&zfcp_data.config_lock, flags);
- write_lock(&adapter->erp_lock);
+ write_lock_irqsave(&adapter->erp_lock, flags);
retval = _zfcp_erp_port_reopen(port, clear, id, ref);
- write_unlock(&adapter->erp_lock);
- read_unlock_irqrestore(&zfcp_data.config_lock, flags);
+ write_unlock_irqrestore(&adapter->erp_lock, flags);
return retval;
}
@@ -424,11 +433,9 @@
struct zfcp_port *port = unit->port;
struct zfcp_adapter *adapter = port->adapter;
- read_lock_irqsave(&zfcp_data.config_lock, flags);
- write_lock(&adapter->erp_lock);
+ write_lock_irqsave(&adapter->erp_lock, flags);
_zfcp_erp_unit_reopen(unit, clear, id, ref);
- write_unlock(&adapter->erp_lock);
- read_unlock_irqrestore(&zfcp_data.config_lock, flags);
+ write_unlock_irqrestore(&adapter->erp_lock, flags);
}
static int status_change_set(unsigned long mask, atomic_t *status)
@@ -540,8 +547,10 @@
{
struct zfcp_port *port;
- list_for_each_entry(port, &adapter->port_list_head, list)
+ read_lock(&adapter->port_list_lock);
+ list_for_each_entry(port, &adapter->port_list, list)
_zfcp_erp_port_reopen(port, clear, id, ref);
+ read_unlock(&adapter->port_list_lock);
}
static void _zfcp_erp_unit_reopen_all(struct zfcp_port *port, int clear,
@@ -549,8 +558,10 @@
{
struct zfcp_unit *unit;
- list_for_each_entry(unit, &port->unit_list_head, list)
+ read_lock(&port->unit_list_lock);
+ list_for_each_entry(unit, &port->unit_list, list)
_zfcp_erp_unit_reopen(unit, clear, id, ref);
+ read_unlock(&port->unit_list_lock);
}
static void zfcp_erp_strategy_followup_failed(struct zfcp_erp_action *act)
@@ -590,16 +601,14 @@
{
unsigned long flags;
- read_lock_irqsave(&zfcp_data.config_lock, flags);
- read_lock(&adapter->erp_lock);
+ read_lock_irqsave(&adapter->erp_lock, flags);
if (list_empty(&adapter->erp_ready_head) &&
list_empty(&adapter->erp_running_head)) {
atomic_clear_mask(ZFCP_STATUS_ADAPTER_ERP_PENDING,
&adapter->status);
wake_up(&adapter->erp_done_wqh);
}
- read_unlock(&adapter->erp_lock);
- read_unlock_irqrestore(&zfcp_data.config_lock, flags);
+ read_unlock_irqrestore(&adapter->erp_lock, flags);
}
static int zfcp_erp_adapter_strategy_open_qdio(struct zfcp_erp_action *act)
@@ -1170,28 +1179,28 @@
switch (act->action) {
case ZFCP_ERP_ACTION_REOPEN_UNIT:
if ((result == ZFCP_ERP_SUCCEEDED) && !unit->device) {
- zfcp_unit_get(unit);
+ get_device(&unit->sysfs_device);
if (scsi_queue_work(unit->port->adapter->scsi_host,
&unit->scsi_work) <= 0)
- zfcp_unit_put(unit);
+ put_device(&unit->sysfs_device);
}
- zfcp_unit_put(unit);
+ put_device(&unit->sysfs_device);
break;
case ZFCP_ERP_ACTION_REOPEN_PORT_FORCED:
case ZFCP_ERP_ACTION_REOPEN_PORT:
if (result == ZFCP_ERP_SUCCEEDED)
zfcp_scsi_schedule_rport_register(port);
- zfcp_port_put(port);
+ put_device(&port->sysfs_device);
break;
case ZFCP_ERP_ACTION_REOPEN_ADAPTER:
if (result == ZFCP_ERP_SUCCEEDED) {
register_service_level(&adapter->service_level);
- schedule_work(&adapter->scan_work);
+ queue_work(adapter->work_queue, &adapter->scan_work);
} else
unregister_service_level(&adapter->service_level);
- zfcp_adapter_put(adapter);
+ kref_put(&adapter->ref, zfcp_adapter_release);
break;
}
}
@@ -1214,12 +1223,12 @@
static int zfcp_erp_strategy(struct zfcp_erp_action *erp_action)
{
int retval;
- struct zfcp_adapter *adapter = erp_action->adapter;
unsigned long flags;
+ struct zfcp_adapter *adapter = erp_action->adapter;
- read_lock_irqsave(&zfcp_data.config_lock, flags);
- write_lock(&adapter->erp_lock);
+ kref_get(&adapter->ref);
+ write_lock_irqsave(&adapter->erp_lock, flags);
zfcp_erp_strategy_check_fsfreq(erp_action);
if (erp_action->status & ZFCP_STATUS_ERP_DISMISSED) {
@@ -1231,11 +1240,9 @@
zfcp_erp_action_to_running(erp_action);
/* no lock to allow for blocking operations */
- write_unlock(&adapter->erp_lock);
- read_unlock_irqrestore(&zfcp_data.config_lock, flags);
+ write_unlock_irqrestore(&adapter->erp_lock, flags);
retval = zfcp_erp_strategy_do_action(erp_action);
- read_lock_irqsave(&zfcp_data.config_lock, flags);
- write_lock(&adapter->erp_lock);
+ write_lock_irqsave(&adapter->erp_lock, flags);
if (erp_action->status & ZFCP_STATUS_ERP_DISMISSED)
retval = ZFCP_ERP_CONTINUES;
@@ -1273,12 +1280,12 @@
zfcp_erp_strategy_followup_failed(erp_action);
unlock:
- write_unlock(&adapter->erp_lock);
- read_unlock_irqrestore(&zfcp_data.config_lock, flags);
+ write_unlock_irqrestore(&adapter->erp_lock, flags);
if (retval != ZFCP_ERP_CONTINUES)
zfcp_erp_action_cleanup(erp_action, retval);
+ kref_put(&adapter->ref, zfcp_adapter_release);
return retval;
}
@@ -1415,6 +1422,7 @@
void *ref, u32 mask, int set_or_clear)
{
struct zfcp_port *port;
+ unsigned long flags;
u32 common_mask = mask & ZFCP_COMMON_FLAGS;
if (set_or_clear == ZFCP_SET) {
@@ -1429,10 +1437,13 @@
atomic_set(&adapter->erp_counter, 0);
}
- if (common_mask)
- list_for_each_entry(port, &adapter->port_list_head, list)
+ if (common_mask) {
+ read_lock_irqsave(&adapter->port_list_lock, flags);
+ list_for_each_entry(port, &adapter->port_list, list)
zfcp_erp_modify_port_status(port, id, ref, common_mask,
set_or_clear);
+ read_unlock_irqrestore(&adapter->port_list_lock, flags);
+ }
}
/**
@@ -1449,6 +1460,7 @@
u32 mask, int set_or_clear)
{
struct zfcp_unit *unit;
+ unsigned long flags;
u32 common_mask = mask & ZFCP_COMMON_FLAGS;
if (set_or_clear == ZFCP_SET) {
@@ -1463,10 +1475,13 @@
atomic_set(&port->erp_counter, 0);
}
- if (common_mask)
- list_for_each_entry(unit, &port->unit_list_head, list)
+ if (common_mask) {
+ read_lock_irqsave(&port->unit_list_lock, flags);
+ list_for_each_entry(unit, &port->unit_list, list)
zfcp_erp_modify_unit_status(unit, id, ref, common_mask,
set_or_clear);
+ read_unlock_irqrestore(&port->unit_list_lock, flags);
+ }
}
/**
@@ -1502,12 +1517,8 @@
*/
void zfcp_erp_port_boxed(struct zfcp_port *port, char *id, void *ref)
{
- unsigned long flags;
-
- read_lock_irqsave(&zfcp_data.config_lock, flags);
zfcp_erp_modify_port_status(port, id, ref,
ZFCP_STATUS_COMMON_ACCESS_BOXED, ZFCP_SET);
- read_unlock_irqrestore(&zfcp_data.config_lock, flags);
zfcp_erp_port_reopen(port, ZFCP_STATUS_COMMON_ERP_FAILED, id, ref);
}
@@ -1535,13 +1546,9 @@
*/
void zfcp_erp_port_access_denied(struct zfcp_port *port, char *id, void *ref)
{
- unsigned long flags;
-
- read_lock_irqsave(&zfcp_data.config_lock, flags);
zfcp_erp_modify_port_status(port, id, ref,
ZFCP_STATUS_COMMON_ERP_FAILED |
ZFCP_STATUS_COMMON_ACCESS_DENIED, ZFCP_SET);
- read_unlock_irqrestore(&zfcp_data.config_lock, flags);
}
/**
@@ -1574,12 +1581,15 @@
void *ref)
{
struct zfcp_unit *unit;
+ unsigned long flags;
int status = atomic_read(&port->status);
if (!(status & (ZFCP_STATUS_COMMON_ACCESS_DENIED |
ZFCP_STATUS_COMMON_ACCESS_BOXED))) {
- list_for_each_entry(unit, &port->unit_list_head, list)
+ read_lock_irqsave(&port->unit_list_lock, flags);
+ list_for_each_entry(unit, &port->unit_list, list)
zfcp_erp_unit_access_changed(unit, id, ref);
+ read_unlock_irqrestore(&port->unit_list_lock, flags);
return;
}
@@ -1595,14 +1605,14 @@
void zfcp_erp_adapter_access_changed(struct zfcp_adapter *adapter, char *id,
void *ref)
{
- struct zfcp_port *port;
unsigned long flags;
+ struct zfcp_port *port;
if (adapter->connection_features & FSF_FEATURE_NPIV_MODE)
return;
- read_lock_irqsave(&zfcp_data.config_lock, flags);
- list_for_each_entry(port, &adapter->port_list_head, list)
+ read_lock_irqsave(&adapter->port_list_lock, flags);
+ list_for_each_entry(port, &adapter->port_list, list)
zfcp_erp_port_access_changed(port, id, ref);
- read_unlock_irqrestore(&zfcp_data.config_lock, flags);
+ read_unlock_irqrestore(&adapter->port_list_lock, flags);
}
diff --git a/drivers/s390/scsi/zfcp_ext.h b/drivers/s390/scsi/zfcp_ext.h
index b3f28de..03dec83 100644
--- a/drivers/s390/scsi/zfcp_ext.h
+++ b/drivers/s390/scsi/zfcp_ext.h
@@ -9,26 +9,31 @@
#ifndef ZFCP_EXT_H
#define ZFCP_EXT_H
+#include <linux/types.h>
+#include <scsi/fc/fc_els.h>
#include "zfcp_def.h"
+#include "zfcp_fc.h"
/* zfcp_aux.c */
extern struct zfcp_unit *zfcp_get_unit_by_lun(struct zfcp_port *, u64);
extern struct zfcp_port *zfcp_get_port_by_wwpn(struct zfcp_adapter *, u64);
-extern int zfcp_adapter_enqueue(struct ccw_device *);
-extern void zfcp_adapter_dequeue(struct zfcp_adapter *);
+extern struct zfcp_adapter *zfcp_adapter_enqueue(struct ccw_device *);
extern struct zfcp_port *zfcp_port_enqueue(struct zfcp_adapter *, u64, u32,
u32);
-extern void zfcp_port_dequeue(struct zfcp_port *);
extern struct zfcp_unit *zfcp_unit_enqueue(struct zfcp_port *, u64);
-extern void zfcp_unit_dequeue(struct zfcp_unit *);
extern int zfcp_reqlist_isempty(struct zfcp_adapter *);
extern void zfcp_sg_free_table(struct scatterlist *, int);
extern int zfcp_sg_setup_table(struct scatterlist *, int);
+extern void zfcp_device_unregister(struct device *,
+ const struct attribute_group *);
+extern void zfcp_adapter_release(struct kref *);
+extern void zfcp_adapter_unregister(struct zfcp_adapter *);
/* zfcp_ccw.c */
-extern int zfcp_ccw_register(void);
extern int zfcp_ccw_priv_sch(struct zfcp_adapter *);
extern struct ccw_driver zfcp_ccw_driver;
+extern struct zfcp_adapter *zfcp_ccw_adapter_by_cdev(struct ccw_device *);
+extern void zfcp_ccw_adapter_put(struct zfcp_adapter *);
/* zfcp_cfdc.c */
extern struct miscdevice zfcp_cfdc_misc;
@@ -51,7 +56,7 @@
struct fsf_status_read_buffer *);
extern void zfcp_dbf_hba_qdio(struct zfcp_dbf *, unsigned int, int, int);
extern void zfcp_dbf_hba_berr(struct zfcp_dbf *, struct zfcp_fsf_req *);
-extern void zfcp_dbf_san_ct_request(struct zfcp_fsf_req *);
+extern void zfcp_dbf_san_ct_request(struct zfcp_fsf_req *, u32);
extern void zfcp_dbf_san_ct_response(struct zfcp_fsf_req *);
extern void zfcp_dbf_san_els_request(struct zfcp_fsf_req *);
extern void zfcp_dbf_san_els_response(struct zfcp_fsf_req *);
@@ -92,24 +97,22 @@
extern void zfcp_erp_timeout_handler(unsigned long);
/* zfcp_fc.c */
-extern int zfcp_fc_scan_ports(struct zfcp_adapter *);
-extern void _zfcp_fc_scan_ports_later(struct work_struct *);
+extern void zfcp_fc_scan_ports(struct work_struct *);
extern void zfcp_fc_incoming_els(struct zfcp_fsf_req *);
extern void zfcp_fc_port_did_lookup(struct work_struct *);
extern void zfcp_fc_trigger_did_lookup(struct zfcp_port *);
-extern void zfcp_fc_plogi_evaluate(struct zfcp_port *, struct fsf_plogi *);
+extern void zfcp_fc_plogi_evaluate(struct zfcp_port *, struct fc_els_flogi *);
extern void zfcp_fc_test_link(struct zfcp_port *);
extern void zfcp_fc_link_test_work(struct work_struct *);
-extern void zfcp_fc_wka_ports_force_offline(struct zfcp_wka_ports *);
+extern void zfcp_fc_wka_ports_force_offline(struct zfcp_fc_wka_ports *);
extern int zfcp_fc_gs_setup(struct zfcp_adapter *);
extern void zfcp_fc_gs_destroy(struct zfcp_adapter *);
-extern int zfcp_fc_execute_els_fc_job(struct fc_bsg_job *);
-extern int zfcp_fc_execute_ct_fc_job(struct fc_bsg_job *);
+extern int zfcp_fc_exec_bsg_job(struct fc_bsg_job *);
/* zfcp_fsf.c */
extern int zfcp_fsf_open_port(struct zfcp_erp_action *);
-extern int zfcp_fsf_open_wka_port(struct zfcp_wka_port *);
-extern int zfcp_fsf_close_wka_port(struct zfcp_wka_port *);
+extern int zfcp_fsf_open_wka_port(struct zfcp_fc_wka_port *);
+extern int zfcp_fsf_close_wka_port(struct zfcp_fc_wka_port *);
extern int zfcp_fsf_close_port(struct zfcp_erp_action *);
extern int zfcp_fsf_close_physical_port(struct zfcp_erp_action *);
extern int zfcp_fsf_open_unit(struct zfcp_erp_action *);
@@ -125,8 +128,10 @@
extern void zfcp_fsf_req_dismiss_all(struct zfcp_adapter *);
extern int zfcp_fsf_status_read(struct zfcp_qdio *);
extern int zfcp_status_read_refill(struct zfcp_adapter *adapter);
-extern int zfcp_fsf_send_ct(struct zfcp_send_ct *, mempool_t *);
-extern int zfcp_fsf_send_els(struct zfcp_send_els *);
+extern int zfcp_fsf_send_ct(struct zfcp_fc_wka_port *, struct zfcp_fsf_ct_els *,
+ mempool_t *);
+extern int zfcp_fsf_send_els(struct zfcp_adapter *, u32,
+ struct zfcp_fsf_ct_els *);
extern int zfcp_fsf_send_fcp_command_task(struct zfcp_unit *,
struct scsi_cmnd *);
extern void zfcp_fsf_req_free(struct zfcp_fsf_req *);
@@ -153,7 +158,6 @@
extern struct zfcp_data zfcp_data;
extern int zfcp_adapter_scsi_register(struct zfcp_adapter *);
extern void zfcp_adapter_scsi_unregister(struct zfcp_adapter *);
-extern char *zfcp_get_fcp_sns_info_ptr(struct fcp_rsp_iu *);
extern struct fc_function_template zfcp_transport_functions;
extern void zfcp_scsi_rport_work(struct work_struct *);
extern void zfcp_scsi_schedule_rport_register(struct zfcp_port *);
diff --git a/drivers/s390/scsi/zfcp_fc.c b/drivers/s390/scsi/zfcp_fc.c
index df23bce..ac5e3b7 100644
--- a/drivers/s390/scsi/zfcp_fc.c
+++ b/drivers/s390/scsi/zfcp_fc.c
@@ -9,73 +9,38 @@
#define KMSG_COMPONENT "zfcp"
#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
+#include <linux/types.h>
+#include <scsi/fc/fc_els.h>
+#include <scsi/libfc.h>
#include "zfcp_ext.h"
+#include "zfcp_fc.h"
-enum rscn_address_format {
- RSCN_PORT_ADDRESS = 0x0,
- RSCN_AREA_ADDRESS = 0x1,
- RSCN_DOMAIN_ADDRESS = 0x2,
- RSCN_FABRIC_ADDRESS = 0x3,
+static u32 zfcp_fc_rscn_range_mask[] = {
+ [ELS_ADDR_FMT_PORT] = 0xFFFFFF,
+ [ELS_ADDR_FMT_AREA] = 0xFFFF00,
+ [ELS_ADDR_FMT_DOM] = 0xFF0000,
+ [ELS_ADDR_FMT_FAB] = 0x000000,
};
-static u32 rscn_range_mask[] = {
- [RSCN_PORT_ADDRESS] = 0xFFFFFF,
- [RSCN_AREA_ADDRESS] = 0xFFFF00,
- [RSCN_DOMAIN_ADDRESS] = 0xFF0000,
- [RSCN_FABRIC_ADDRESS] = 0x000000,
-};
-
-struct gpn_ft_resp_acc {
- u8 control;
- u8 port_id[3];
- u8 reserved[4];
- u64 wwpn;
-} __attribute__ ((packed));
-
-#define ZFCP_CT_SIZE_ONE_PAGE (PAGE_SIZE - sizeof(struct ct_hdr))
-#define ZFCP_GPN_FT_ENTRIES (ZFCP_CT_SIZE_ONE_PAGE \
- / sizeof(struct gpn_ft_resp_acc))
-#define ZFCP_GPN_FT_BUFFERS 4
-#define ZFCP_GPN_FT_MAX_SIZE (ZFCP_GPN_FT_BUFFERS * PAGE_SIZE \
- - sizeof(struct ct_hdr))
-#define ZFCP_GPN_FT_MAX_ENTRIES ZFCP_GPN_FT_BUFFERS * (ZFCP_GPN_FT_ENTRIES + 1)
-
-struct ct_iu_gpn_ft_resp {
- struct ct_hdr header;
- struct gpn_ft_resp_acc accept[ZFCP_GPN_FT_ENTRIES];
-} __attribute__ ((packed));
-
-struct zfcp_gpn_ft {
- struct zfcp_send_ct ct;
- struct scatterlist sg_req;
- struct scatterlist sg_resp[ZFCP_GPN_FT_BUFFERS];
-};
-
-struct zfcp_fc_ns_handler_data {
- struct completion done;
- void (*handler)(unsigned long);
- unsigned long handler_data;
-};
-
-static int zfcp_fc_wka_port_get(struct zfcp_wka_port *wka_port)
+static int zfcp_fc_wka_port_get(struct zfcp_fc_wka_port *wka_port)
{
if (mutex_lock_interruptible(&wka_port->mutex))
return -ERESTARTSYS;
- if (wka_port->status == ZFCP_WKA_PORT_OFFLINE ||
- wka_port->status == ZFCP_WKA_PORT_CLOSING) {
- wka_port->status = ZFCP_WKA_PORT_OPENING;
+ if (wka_port->status == ZFCP_FC_WKA_PORT_OFFLINE ||
+ wka_port->status == ZFCP_FC_WKA_PORT_CLOSING) {
+ wka_port->status = ZFCP_FC_WKA_PORT_OPENING;
if (zfcp_fsf_open_wka_port(wka_port))
- wka_port->status = ZFCP_WKA_PORT_OFFLINE;
+ wka_port->status = ZFCP_FC_WKA_PORT_OFFLINE;
}
mutex_unlock(&wka_port->mutex);
wait_event(wka_port->completion_wq,
- wka_port->status == ZFCP_WKA_PORT_ONLINE ||
- wka_port->status == ZFCP_WKA_PORT_OFFLINE);
+ wka_port->status == ZFCP_FC_WKA_PORT_ONLINE ||
+ wka_port->status == ZFCP_FC_WKA_PORT_OFFLINE);
- if (wka_port->status == ZFCP_WKA_PORT_ONLINE) {
+ if (wka_port->status == ZFCP_FC_WKA_PORT_ONLINE) {
atomic_inc(&wka_port->refcount);
return 0;
}
@@ -85,24 +50,24 @@
static void zfcp_fc_wka_port_offline(struct work_struct *work)
{
struct delayed_work *dw = to_delayed_work(work);
- struct zfcp_wka_port *wka_port =
- container_of(dw, struct zfcp_wka_port, work);
+ struct zfcp_fc_wka_port *wka_port =
+ container_of(dw, struct zfcp_fc_wka_port, work);
mutex_lock(&wka_port->mutex);
if ((atomic_read(&wka_port->refcount) != 0) ||
- (wka_port->status != ZFCP_WKA_PORT_ONLINE))
+ (wka_port->status != ZFCP_FC_WKA_PORT_ONLINE))
goto out;
- wka_port->status = ZFCP_WKA_PORT_CLOSING;
+ wka_port->status = ZFCP_FC_WKA_PORT_CLOSING;
if (zfcp_fsf_close_wka_port(wka_port)) {
- wka_port->status = ZFCP_WKA_PORT_OFFLINE;
+ wka_port->status = ZFCP_FC_WKA_PORT_OFFLINE;
wake_up(&wka_port->completion_wq);
}
out:
mutex_unlock(&wka_port->mutex);
}
-static void zfcp_fc_wka_port_put(struct zfcp_wka_port *wka_port)
+static void zfcp_fc_wka_port_put(struct zfcp_fc_wka_port *wka_port)
{
if (atomic_dec_return(&wka_port->refcount) != 0)
return;
@@ -110,7 +75,7 @@
schedule_delayed_work(&wka_port->work, HZ / 100);
}
-static void zfcp_fc_wka_port_init(struct zfcp_wka_port *wka_port, u32 d_id,
+static void zfcp_fc_wka_port_init(struct zfcp_fc_wka_port *wka_port, u32 d_id,
struct zfcp_adapter *adapter)
{
init_waitqueue_head(&wka_port->completion_wq);
@@ -118,107 +83,107 @@
wka_port->adapter = adapter;
wka_port->d_id = d_id;
- wka_port->status = ZFCP_WKA_PORT_OFFLINE;
+ wka_port->status = ZFCP_FC_WKA_PORT_OFFLINE;
atomic_set(&wka_port->refcount, 0);
mutex_init(&wka_port->mutex);
INIT_DELAYED_WORK(&wka_port->work, zfcp_fc_wka_port_offline);
}
-static void zfcp_fc_wka_port_force_offline(struct zfcp_wka_port *wka)
+static void zfcp_fc_wka_port_force_offline(struct zfcp_fc_wka_port *wka)
{
cancel_delayed_work_sync(&wka->work);
mutex_lock(&wka->mutex);
- wka->status = ZFCP_WKA_PORT_OFFLINE;
+ wka->status = ZFCP_FC_WKA_PORT_OFFLINE;
mutex_unlock(&wka->mutex);
}
-void zfcp_fc_wka_ports_force_offline(struct zfcp_wka_ports *gs)
+void zfcp_fc_wka_ports_force_offline(struct zfcp_fc_wka_ports *gs)
{
+ if (!gs)
+ return;
zfcp_fc_wka_port_force_offline(&gs->ms);
zfcp_fc_wka_port_force_offline(&gs->ts);
zfcp_fc_wka_port_force_offline(&gs->ds);
zfcp_fc_wka_port_force_offline(&gs->as);
- zfcp_fc_wka_port_force_offline(&gs->ks);
}
static void _zfcp_fc_incoming_rscn(struct zfcp_fsf_req *fsf_req, u32 range,
- struct fcp_rscn_element *elem)
+ struct fc_els_rscn_page *page)
{
unsigned long flags;
+ struct zfcp_adapter *adapter = fsf_req->adapter;
struct zfcp_port *port;
- read_lock_irqsave(&zfcp_data.config_lock, flags);
- list_for_each_entry(port, &fsf_req->adapter->port_list_head, list) {
- if ((port->d_id & range) == (elem->nport_did & range))
+ read_lock_irqsave(&adapter->port_list_lock, flags);
+ list_for_each_entry(port, &adapter->port_list, list) {
+ if ((port->d_id & range) == (ntoh24(page->rscn_fid) & range))
zfcp_fc_test_link(port);
if (!port->d_id)
zfcp_erp_port_reopen(port,
ZFCP_STATUS_COMMON_ERP_FAILED,
"fcrscn1", NULL);
}
-
- read_unlock_irqrestore(&zfcp_data.config_lock, flags);
+ read_unlock_irqrestore(&adapter->port_list_lock, flags);
}
static void zfcp_fc_incoming_rscn(struct zfcp_fsf_req *fsf_req)
{
struct fsf_status_read_buffer *status_buffer = (void *)fsf_req->data;
- struct fcp_rscn_head *fcp_rscn_head;
- struct fcp_rscn_element *fcp_rscn_element;
+ struct fc_els_rscn *head;
+ struct fc_els_rscn_page *page;
u16 i;
u16 no_entries;
- u32 range_mask;
+ unsigned int afmt;
- fcp_rscn_head = (struct fcp_rscn_head *) status_buffer->payload.data;
- fcp_rscn_element = (struct fcp_rscn_element *) fcp_rscn_head;
+ head = (struct fc_els_rscn *) status_buffer->payload.data;
+ page = (struct fc_els_rscn_page *) head;
/* see FC-FS */
- no_entries = fcp_rscn_head->payload_len /
- sizeof(struct fcp_rscn_element);
+ no_entries = head->rscn_plen / sizeof(struct fc_els_rscn_page);
for (i = 1; i < no_entries; i++) {
/* skip head and start with 1st element */
- fcp_rscn_element++;
- range_mask = rscn_range_mask[fcp_rscn_element->addr_format];
- _zfcp_fc_incoming_rscn(fsf_req, range_mask, fcp_rscn_element);
+ page++;
+ afmt = page->rscn_page_flags & ELS_RSCN_ADDR_FMT_MASK;
+ _zfcp_fc_incoming_rscn(fsf_req, zfcp_fc_rscn_range_mask[afmt],
+ page);
}
- schedule_work(&fsf_req->adapter->scan_work);
+ queue_work(fsf_req->adapter->work_queue, &fsf_req->adapter->scan_work);
}
static void zfcp_fc_incoming_wwpn(struct zfcp_fsf_req *req, u64 wwpn)
{
+ unsigned long flags;
struct zfcp_adapter *adapter = req->adapter;
struct zfcp_port *port;
- unsigned long flags;
- read_lock_irqsave(&zfcp_data.config_lock, flags);
- list_for_each_entry(port, &adapter->port_list_head, list)
- if (port->wwpn == wwpn)
+ read_lock_irqsave(&adapter->port_list_lock, flags);
+ list_for_each_entry(port, &adapter->port_list, list)
+ if (port->wwpn == wwpn) {
+ zfcp_erp_port_forced_reopen(port, 0, "fciwwp1", req);
break;
- read_unlock_irqrestore(&zfcp_data.config_lock, flags);
-
- if (port && (port->wwpn == wwpn))
- zfcp_erp_port_forced_reopen(port, 0, "fciwwp1", req);
+ }
+ read_unlock_irqrestore(&adapter->port_list_lock, flags);
}
static void zfcp_fc_incoming_plogi(struct zfcp_fsf_req *req)
{
- struct fsf_status_read_buffer *status_buffer =
- (struct fsf_status_read_buffer *)req->data;
- struct fsf_plogi *els_plogi =
- (struct fsf_plogi *) status_buffer->payload.data;
+ struct fsf_status_read_buffer *status_buffer;
+ struct fc_els_flogi *plogi;
- zfcp_fc_incoming_wwpn(req, els_plogi->serv_param.wwpn);
+ status_buffer = (struct fsf_status_read_buffer *) req->data;
+ plogi = (struct fc_els_flogi *) status_buffer->payload.data;
+ zfcp_fc_incoming_wwpn(req, plogi->fl_wwpn);
}
static void zfcp_fc_incoming_logo(struct zfcp_fsf_req *req)
{
struct fsf_status_read_buffer *status_buffer =
(struct fsf_status_read_buffer *)req->data;
- struct fcp_logo *els_logo =
- (struct fcp_logo *) status_buffer->payload.data;
+ struct fc_els_logo *logo =
+ (struct fc_els_logo *) status_buffer->payload.data;
- zfcp_fc_incoming_wwpn(req, els_logo->nport_wwpn);
+ zfcp_fc_incoming_wwpn(req, logo->fl_n_port_wwn);
}
/**
@@ -232,79 +197,72 @@
unsigned int els_type = status_buffer->payload.data[0];
zfcp_dbf_san_incoming_els(fsf_req);
- if (els_type == LS_PLOGI)
+ if (els_type == ELS_PLOGI)
zfcp_fc_incoming_plogi(fsf_req);
- else if (els_type == LS_LOGO)
+ else if (els_type == ELS_LOGO)
zfcp_fc_incoming_logo(fsf_req);
- else if (els_type == LS_RSCN)
+ else if (els_type == ELS_RSCN)
zfcp_fc_incoming_rscn(fsf_req);
}
-static void zfcp_fc_ns_handler(unsigned long data)
+static void zfcp_fc_ns_gid_pn_eval(void *data)
{
- struct zfcp_fc_ns_handler_data *compl_rec =
- (struct zfcp_fc_ns_handler_data *) data;
-
- if (compl_rec->handler)
- compl_rec->handler(compl_rec->handler_data);
-
- complete(&compl_rec->done);
-}
-
-static void zfcp_fc_ns_gid_pn_eval(unsigned long data)
-{
- struct zfcp_gid_pn_data *gid_pn = (struct zfcp_gid_pn_data *) data;
- struct zfcp_send_ct *ct = &gid_pn->ct;
- struct ct_iu_gid_pn_req *ct_iu_req = sg_virt(ct->req);
- struct ct_iu_gid_pn_resp *ct_iu_resp = sg_virt(ct->resp);
+ struct zfcp_fc_gid_pn *gid_pn = data;
+ struct zfcp_fsf_ct_els *ct = &gid_pn->ct;
+ struct zfcp_fc_gid_pn_req *gid_pn_req = sg_virt(ct->req);
+ struct zfcp_fc_gid_pn_resp *gid_pn_resp = sg_virt(ct->resp);
struct zfcp_port *port = gid_pn->port;
if (ct->status)
return;
- if (ct_iu_resp->header.cmd_rsp_code != ZFCP_CT_ACCEPT)
+ if (gid_pn_resp->ct_hdr.ct_cmd != FC_FS_ACC)
return;
/* paranoia */
- if (ct_iu_req->wwpn != port->wwpn)
+ if (gid_pn_req->gid_pn.fn_wwpn != port->wwpn)
return;
/* looks like a valid d_id */
- port->d_id = ct_iu_resp->d_id & ZFCP_DID_MASK;
+ port->d_id = ntoh24(gid_pn_resp->gid_pn.fp_fid);
+}
+
+static void zfcp_fc_complete(void *data)
+{
+ complete(data);
}
static int zfcp_fc_ns_gid_pn_request(struct zfcp_port *port,
- struct zfcp_gid_pn_data *gid_pn)
+ struct zfcp_fc_gid_pn *gid_pn)
{
struct zfcp_adapter *adapter = port->adapter;
- struct zfcp_fc_ns_handler_data compl_rec;
+ DECLARE_COMPLETION_ONSTACK(completion);
int ret;
/* setup parameters for send generic command */
gid_pn->port = port;
- gid_pn->ct.wka_port = &adapter->gs->ds;
- gid_pn->ct.handler = zfcp_fc_ns_handler;
- gid_pn->ct.handler_data = (unsigned long) &compl_rec;
- gid_pn->ct.req = &gid_pn->req;
- gid_pn->ct.resp = &gid_pn->resp;
- sg_init_one(&gid_pn->req, &gid_pn->ct_iu_req,
- sizeof(struct ct_iu_gid_pn_req));
- sg_init_one(&gid_pn->resp, &gid_pn->ct_iu_resp,
- sizeof(struct ct_iu_gid_pn_resp));
+ gid_pn->ct.handler = zfcp_fc_complete;
+ gid_pn->ct.handler_data = &completion;
+ gid_pn->ct.req = &gid_pn->sg_req;
+ gid_pn->ct.resp = &gid_pn->sg_resp;
+ sg_init_one(&gid_pn->sg_req, &gid_pn->gid_pn_req,
+ sizeof(struct zfcp_fc_gid_pn_req));
+ sg_init_one(&gid_pn->sg_resp, &gid_pn->gid_pn_resp,
+ sizeof(struct zfcp_fc_gid_pn_resp));
/* setup nameserver request */
- gid_pn->ct_iu_req.header.revision = ZFCP_CT_REVISION;
- gid_pn->ct_iu_req.header.gs_type = ZFCP_CT_DIRECTORY_SERVICE;
- gid_pn->ct_iu_req.header.gs_subtype = ZFCP_CT_NAME_SERVER;
- gid_pn->ct_iu_req.header.options = ZFCP_CT_SYNCHRONOUS;
- gid_pn->ct_iu_req.header.cmd_rsp_code = ZFCP_CT_GID_PN;
- gid_pn->ct_iu_req.header.max_res_size = ZFCP_CT_SIZE_ONE_PAGE / 4;
- gid_pn->ct_iu_req.wwpn = port->wwpn;
+ gid_pn->gid_pn_req.ct_hdr.ct_rev = FC_CT_REV;
+ gid_pn->gid_pn_req.ct_hdr.ct_fs_type = FC_FST_DIR;
+ gid_pn->gid_pn_req.ct_hdr.ct_fs_subtype = FC_NS_SUBTYPE;
+ gid_pn->gid_pn_req.ct_hdr.ct_options = 0;
+ gid_pn->gid_pn_req.ct_hdr.ct_cmd = FC_NS_GID_PN;
+ gid_pn->gid_pn_req.ct_hdr.ct_mr_size = ZFCP_FC_CT_SIZE_PAGE / 4;
+ gid_pn->gid_pn_req.gid_pn.fn_wwpn = port->wwpn;
- init_completion(&compl_rec.done);
- compl_rec.handler = zfcp_fc_ns_gid_pn_eval;
- compl_rec.handler_data = (unsigned long) gid_pn;
- ret = zfcp_fsf_send_ct(&gid_pn->ct, adapter->pool.gid_pn_req);
- if (!ret)
- wait_for_completion(&compl_rec.done);
+ ret = zfcp_fsf_send_ct(&adapter->gs->ds, &gid_pn->ct,
+ adapter->pool.gid_pn_req);
+ if (!ret) {
+ wait_for_completion(&completion);
+ zfcp_fc_ns_gid_pn_eval(gid_pn);
+ }
return ret;
}
@@ -316,10 +274,10 @@
static int zfcp_fc_ns_gid_pn(struct zfcp_port *port)
{
int ret;
- struct zfcp_gid_pn_data *gid_pn;
+ struct zfcp_fc_gid_pn *gid_pn;
struct zfcp_adapter *adapter = port->adapter;
- gid_pn = mempool_alloc(adapter->pool.gid_pn_data, GFP_ATOMIC);
+ gid_pn = mempool_alloc(adapter->pool.gid_pn, GFP_ATOMIC);
if (!gid_pn)
return -ENOMEM;
@@ -333,7 +291,7 @@
zfcp_fc_wka_port_put(&adapter->gs->ds);
out:
- mempool_free(gid_pn, adapter->pool.gid_pn_data);
+ mempool_free(gid_pn, adapter->pool.gid_pn);
return ret;
}
@@ -357,7 +315,7 @@
zfcp_erp_port_reopen(port, 0, "fcgpn_3", NULL);
out:
- zfcp_port_put(port);
+ put_device(&port->sysfs_device);
}
/**
@@ -366,9 +324,9 @@
*/
void zfcp_fc_trigger_did_lookup(struct zfcp_port *port)
{
- zfcp_port_get(port);
+ get_device(&port->sysfs_device);
if (!queue_work(port->adapter->work_queue, &port->gid_pn_work))
- zfcp_port_put(port);
+ put_device(&port->sysfs_device);
}
/**
@@ -378,33 +336,36 @@
*
* Evaluate PLOGI playload and copy important fields into zfcp_port structure
*/
-void zfcp_fc_plogi_evaluate(struct zfcp_port *port, struct fsf_plogi *plogi)
+void zfcp_fc_plogi_evaluate(struct zfcp_port *port, struct fc_els_flogi *plogi)
{
- port->maxframe_size = plogi->serv_param.common_serv_param[7] |
- ((plogi->serv_param.common_serv_param[6] & 0x0F) << 8);
- if (plogi->serv_param.class1_serv_param[0] & 0x80)
+ if (plogi->fl_wwpn != port->wwpn) {
+ port->d_id = 0;
+ dev_warn(&port->adapter->ccw_device->dev,
+ "A port opened with WWPN 0x%016Lx returned data that "
+ "identifies it as WWPN 0x%016Lx\n",
+ (unsigned long long) port->wwpn,
+ (unsigned long long) plogi->fl_wwpn);
+ return;
+ }
+
+ port->wwnn = plogi->fl_wwnn;
+ port->maxframe_size = plogi->fl_csp.sp_bb_data;
+
+ if (plogi->fl_cssp[0].cp_class & FC_CPC_VALID)
port->supported_classes |= FC_COS_CLASS1;
- if (plogi->serv_param.class2_serv_param[0] & 0x80)
+ if (plogi->fl_cssp[1].cp_class & FC_CPC_VALID)
port->supported_classes |= FC_COS_CLASS2;
- if (plogi->serv_param.class3_serv_param[0] & 0x80)
+ if (plogi->fl_cssp[2].cp_class & FC_CPC_VALID)
port->supported_classes |= FC_COS_CLASS3;
- if (plogi->serv_param.class4_serv_param[0] & 0x80)
+ if (plogi->fl_cssp[3].cp_class & FC_CPC_VALID)
port->supported_classes |= FC_COS_CLASS4;
}
-struct zfcp_els_adisc {
- struct zfcp_send_els els;
- struct scatterlist req;
- struct scatterlist resp;
- struct zfcp_ls_adisc ls_adisc;
- struct zfcp_ls_adisc ls_adisc_acc;
-};
-
-static void zfcp_fc_adisc_handler(unsigned long data)
+static void zfcp_fc_adisc_handler(void *data)
{
- struct zfcp_els_adisc *adisc = (struct zfcp_els_adisc *) data;
+ struct zfcp_fc_els_adisc *adisc = data;
struct zfcp_port *port = adisc->els.port;
- struct zfcp_ls_adisc *ls_adisc = &adisc->ls_adisc_acc;
+ struct fc_els_adisc *adisc_resp = &adisc->adisc_resp;
if (adisc->els.status) {
/* request rejected or timed out */
@@ -414,9 +375,9 @@
}
if (!port->wwnn)
- port->wwnn = ls_adisc->wwnn;
+ port->wwnn = adisc_resp->adisc_wwnn;
- if ((port->wwpn != ls_adisc->wwpn) ||
+ if ((port->wwpn != adisc_resp->adisc_wwpn) ||
!(atomic_read(&port->status) & ZFCP_STATUS_COMMON_OPEN)) {
zfcp_erp_port_reopen(port, ZFCP_STATUS_COMMON_ERP_FAILED,
"fcadh_2", NULL);
@@ -427,40 +388,44 @@
zfcp_scsi_schedule_rport_register(port);
out:
atomic_clear_mask(ZFCP_STATUS_PORT_LINK_TEST, &port->status);
- zfcp_port_put(port);
- kfree(adisc);
+ put_device(&port->sysfs_device);
+ kmem_cache_free(zfcp_data.adisc_cache, adisc);
}
static int zfcp_fc_adisc(struct zfcp_port *port)
{
- struct zfcp_els_adisc *adisc;
+ struct zfcp_fc_els_adisc *adisc;
struct zfcp_adapter *adapter = port->adapter;
+ int ret;
- adisc = kzalloc(sizeof(struct zfcp_els_adisc), GFP_ATOMIC);
+ adisc = kmem_cache_alloc(zfcp_data.adisc_cache, GFP_ATOMIC);
if (!adisc)
return -ENOMEM;
+ adisc->els.port = port;
adisc->els.req = &adisc->req;
adisc->els.resp = &adisc->resp;
- sg_init_one(adisc->els.req, &adisc->ls_adisc,
- sizeof(struct zfcp_ls_adisc));
- sg_init_one(adisc->els.resp, &adisc->ls_adisc_acc,
- sizeof(struct zfcp_ls_adisc));
+ sg_init_one(adisc->els.req, &adisc->adisc_req,
+ sizeof(struct fc_els_adisc));
+ sg_init_one(adisc->els.resp, &adisc->adisc_resp,
+ sizeof(struct fc_els_adisc));
- adisc->els.adapter = adapter;
- adisc->els.port = port;
- adisc->els.d_id = port->d_id;
adisc->els.handler = zfcp_fc_adisc_handler;
- adisc->els.handler_data = (unsigned long) adisc;
- adisc->els.ls_code = adisc->ls_adisc.code = ZFCP_LS_ADISC;
+ adisc->els.handler_data = adisc;
/* acc. to FC-FS, hard_nport_id in ADISC should not be set for ports
without FC-AL-2 capability, so we don't set it */
- adisc->ls_adisc.wwpn = fc_host_port_name(adapter->scsi_host);
- adisc->ls_adisc.wwnn = fc_host_node_name(adapter->scsi_host);
- adisc->ls_adisc.nport_id = fc_host_port_id(adapter->scsi_host);
+ adisc->adisc_req.adisc_wwpn = fc_host_port_name(adapter->scsi_host);
+ adisc->adisc_req.adisc_wwnn = fc_host_node_name(adapter->scsi_host);
+ adisc->adisc_req.adisc_cmd = ELS_ADISC;
+ hton24(adisc->adisc_req.adisc_port_id,
+ fc_host_port_id(adapter->scsi_host));
- return zfcp_fsf_send_els(&adisc->els);
+ ret = zfcp_fsf_send_els(adapter, port->d_id, &adisc->els);
+ if (ret)
+ kmem_cache_free(zfcp_data.adisc_cache, adisc);
+
+ return ret;
}
void zfcp_fc_link_test_work(struct work_struct *work)
@@ -469,7 +434,7 @@
container_of(work, struct zfcp_port, test_link_work);
int retval;
- zfcp_port_get(port);
+ get_device(&port->sysfs_device);
port->rport_task = RPORT_DEL;
zfcp_scsi_rport_work(&port->rport_work);
@@ -488,7 +453,7 @@
zfcp_erp_port_forced_reopen(port, 0, "fcltwk1", NULL);
out:
- zfcp_port_put(port);
+ put_device(&port->sysfs_device);
}
/**
@@ -501,12 +466,12 @@
*/
void zfcp_fc_test_link(struct zfcp_port *port)
{
- zfcp_port_get(port);
+ get_device(&port->sysfs_device);
if (!queue_work(port->adapter->work_queue, &port->test_link_work))
- zfcp_port_put(port);
+ put_device(&port->sysfs_device);
}
-static void zfcp_free_sg_env(struct zfcp_gpn_ft *gpn_ft, int buf_num)
+static void zfcp_free_sg_env(struct zfcp_fc_gpn_ft *gpn_ft, int buf_num)
{
struct scatterlist *sg = &gpn_ft->sg_req;
@@ -516,10 +481,10 @@
kfree(gpn_ft);
}
-static struct zfcp_gpn_ft *zfcp_alloc_sg_env(int buf_num)
+static struct zfcp_fc_gpn_ft *zfcp_alloc_sg_env(int buf_num)
{
- struct zfcp_gpn_ft *gpn_ft;
- struct ct_iu_gpn_ft_req *req;
+ struct zfcp_fc_gpn_ft *gpn_ft;
+ struct zfcp_fc_gpn_ft_req *req;
gpn_ft = kzalloc(sizeof(*gpn_ft), GFP_KERNEL);
if (!gpn_ft)
@@ -542,159 +507,152 @@
}
-static int zfcp_fc_send_gpn_ft(struct zfcp_gpn_ft *gpn_ft,
+static int zfcp_fc_send_gpn_ft(struct zfcp_fc_gpn_ft *gpn_ft,
struct zfcp_adapter *adapter, int max_bytes)
{
- struct zfcp_send_ct *ct = &gpn_ft->ct;
- struct ct_iu_gpn_ft_req *req = sg_virt(&gpn_ft->sg_req);
- struct zfcp_fc_ns_handler_data compl_rec;
+ struct zfcp_fsf_ct_els *ct = &gpn_ft->ct;
+ struct zfcp_fc_gpn_ft_req *req = sg_virt(&gpn_ft->sg_req);
+ DECLARE_COMPLETION_ONSTACK(completion);
int ret;
/* prepare CT IU for GPN_FT */
- req->header.revision = ZFCP_CT_REVISION;
- req->header.gs_type = ZFCP_CT_DIRECTORY_SERVICE;
- req->header.gs_subtype = ZFCP_CT_NAME_SERVER;
- req->header.options = ZFCP_CT_SYNCHRONOUS;
- req->header.cmd_rsp_code = ZFCP_CT_GPN_FT;
- req->header.max_res_size = max_bytes / 4;
- req->flags = 0;
- req->domain_id_scope = 0;
- req->area_id_scope = 0;
- req->fc4_type = ZFCP_CT_SCSI_FCP;
+ req->ct_hdr.ct_rev = FC_CT_REV;
+ req->ct_hdr.ct_fs_type = FC_FST_DIR;
+ req->ct_hdr.ct_fs_subtype = FC_NS_SUBTYPE;
+ req->ct_hdr.ct_options = 0;
+ req->ct_hdr.ct_cmd = FC_NS_GPN_FT;
+ req->ct_hdr.ct_mr_size = max_bytes / 4;
+ req->gpn_ft.fn_domain_id_scope = 0;
+ req->gpn_ft.fn_area_id_scope = 0;
+ req->gpn_ft.fn_fc4_type = FC_TYPE_FCP;
/* prepare zfcp_send_ct */
- ct->wka_port = &adapter->gs->ds;
- ct->handler = zfcp_fc_ns_handler;
- ct->handler_data = (unsigned long)&compl_rec;
+ ct->handler = zfcp_fc_complete;
+ ct->handler_data = &completion;
ct->req = &gpn_ft->sg_req;
ct->resp = gpn_ft->sg_resp;
- init_completion(&compl_rec.done);
- compl_rec.handler = NULL;
- ret = zfcp_fsf_send_ct(ct, NULL);
+ ret = zfcp_fsf_send_ct(&adapter->gs->ds, ct, NULL);
if (!ret)
- wait_for_completion(&compl_rec.done);
+ wait_for_completion(&completion);
return ret;
}
-static void zfcp_fc_validate_port(struct zfcp_port *port)
+static void zfcp_fc_validate_port(struct zfcp_port *port, struct list_head *lh)
{
- struct zfcp_adapter *adapter = port->adapter;
-
if (!(atomic_read(&port->status) & ZFCP_STATUS_COMMON_NOESC))
return;
atomic_clear_mask(ZFCP_STATUS_COMMON_NOESC, &port->status);
if ((port->supported_classes != 0) ||
- !list_empty(&port->unit_list_head)) {
- zfcp_port_put(port);
+ !list_empty(&port->unit_list))
return;
- }
- zfcp_erp_port_shutdown(port, 0, "fcpval1", NULL);
- zfcp_erp_wait(adapter);
- zfcp_port_put(port);
- zfcp_port_dequeue(port);
+
+ list_move_tail(&port->list, lh);
}
-static int zfcp_fc_eval_gpn_ft(struct zfcp_gpn_ft *gpn_ft, int max_entries)
+static int zfcp_fc_eval_gpn_ft(struct zfcp_fc_gpn_ft *gpn_ft,
+ struct zfcp_adapter *adapter, int max_entries)
{
- struct zfcp_send_ct *ct = &gpn_ft->ct;
+ struct zfcp_fsf_ct_els *ct = &gpn_ft->ct;
struct scatterlist *sg = gpn_ft->sg_resp;
- struct ct_hdr *hdr = sg_virt(sg);
- struct gpn_ft_resp_acc *acc = sg_virt(sg);
- struct zfcp_adapter *adapter = ct->wka_port->adapter;
+ struct fc_ct_hdr *hdr = sg_virt(sg);
+ struct fc_gpn_ft_resp *acc = sg_virt(sg);
struct zfcp_port *port, *tmp;
+ unsigned long flags;
+ LIST_HEAD(remove_lh);
u32 d_id;
int ret = 0, x, last = 0;
if (ct->status)
return -EIO;
- if (hdr->cmd_rsp_code != ZFCP_CT_ACCEPT) {
- if (hdr->reason_code == ZFCP_CT_UNABLE_TO_PERFORM_CMD)
+ if (hdr->ct_cmd != FC_FS_ACC) {
+ if (hdr->ct_reason == FC_BA_RJT_UNABLE)
return -EAGAIN; /* might be a temporary condition */
return -EIO;
}
- if (hdr->max_res_size) {
+ if (hdr->ct_mr_size) {
dev_warn(&adapter->ccw_device->dev,
"The name server reported %d words residual data\n",
- hdr->max_res_size);
+ hdr->ct_mr_size);
return -E2BIG;
}
- mutex_lock(&zfcp_data.config_mutex);
-
/* first entry is the header */
for (x = 1; x < max_entries && !last; x++) {
- if (x % (ZFCP_GPN_FT_ENTRIES + 1))
+ if (x % (ZFCP_FC_GPN_FT_ENT_PAGE + 1))
acc++;
else
acc = sg_virt(++sg);
- last = acc->control & 0x80;
- d_id = acc->port_id[0] << 16 | acc->port_id[1] << 8 |
- acc->port_id[2];
+ last = acc->fp_flags & FC_NS_FID_LAST;
+ d_id = ntoh24(acc->fp_fid);
/* don't attach ports with a well known address */
- if ((d_id & ZFCP_DID_WKA) == ZFCP_DID_WKA)
+ if (d_id >= FC_FID_WELL_KNOWN_BASE)
continue;
/* skip the adapter's port and known remote ports */
- if (acc->wwpn == fc_host_port_name(adapter->scsi_host))
- continue;
- port = zfcp_get_port_by_wwpn(adapter, acc->wwpn);
- if (port)
+ if (acc->fp_wwpn == fc_host_port_name(adapter->scsi_host))
continue;
- port = zfcp_port_enqueue(adapter, acc->wwpn,
+ port = zfcp_port_enqueue(adapter, acc->fp_wwpn,
ZFCP_STATUS_COMMON_NOESC, d_id);
- if (IS_ERR(port))
- ret = PTR_ERR(port);
- else
+ if (!IS_ERR(port))
zfcp_erp_port_reopen(port, 0, "fcegpf1", NULL);
+ else if (PTR_ERR(port) != -EEXIST)
+ ret = PTR_ERR(port);
}
zfcp_erp_wait(adapter);
- list_for_each_entry_safe(port, tmp, &adapter->port_list_head, list)
- zfcp_fc_validate_port(port);
- mutex_unlock(&zfcp_data.config_mutex);
+ write_lock_irqsave(&adapter->port_list_lock, flags);
+ list_for_each_entry_safe(port, tmp, &adapter->port_list, list)
+ zfcp_fc_validate_port(port, &remove_lh);
+ write_unlock_irqrestore(&adapter->port_list_lock, flags);
+
+ list_for_each_entry_safe(port, tmp, &remove_lh, list) {
+ zfcp_erp_port_shutdown(port, 0, "fcegpf2", NULL);
+ zfcp_device_unregister(&port->sysfs_device,
+ &zfcp_sysfs_port_attrs);
+ }
+
return ret;
}
/**
* zfcp_fc_scan_ports - scan remote ports and attach new ports
- * @adapter: pointer to struct zfcp_adapter
+ * @work: reference to scheduled work
*/
-int zfcp_fc_scan_ports(struct zfcp_adapter *adapter)
+void zfcp_fc_scan_ports(struct work_struct *work)
{
+ struct zfcp_adapter *adapter = container_of(work, struct zfcp_adapter,
+ scan_work);
int ret, i;
- struct zfcp_gpn_ft *gpn_ft;
+ struct zfcp_fc_gpn_ft *gpn_ft;
int chain, max_entries, buf_num, max_bytes;
chain = adapter->adapter_features & FSF_FEATURE_ELS_CT_CHAINED_SBALS;
- buf_num = chain ? ZFCP_GPN_FT_BUFFERS : 1;
- max_entries = chain ? ZFCP_GPN_FT_MAX_ENTRIES : ZFCP_GPN_FT_ENTRIES;
- max_bytes = chain ? ZFCP_GPN_FT_MAX_SIZE : ZFCP_CT_SIZE_ONE_PAGE;
+ buf_num = chain ? ZFCP_FC_GPN_FT_NUM_BUFS : 1;
+ max_entries = chain ? ZFCP_FC_GPN_FT_MAX_ENT : ZFCP_FC_GPN_FT_ENT_PAGE;
+ max_bytes = chain ? ZFCP_FC_GPN_FT_MAX_SIZE : ZFCP_FC_CT_SIZE_PAGE;
if (fc_host_port_type(adapter->scsi_host) != FC_PORTTYPE_NPORT &&
fc_host_port_type(adapter->scsi_host) != FC_PORTTYPE_NPIV)
- return 0;
+ return;
- ret = zfcp_fc_wka_port_get(&adapter->gs->ds);
- if (ret)
- return ret;
+ if (zfcp_fc_wka_port_get(&adapter->gs->ds))
+ return;
gpn_ft = zfcp_alloc_sg_env(buf_num);
- if (!gpn_ft) {
- ret = -ENOMEM;
+ if (!gpn_ft)
goto out;
- }
for (i = 0; i < 3; i++) {
ret = zfcp_fc_send_gpn_ft(gpn_ft, adapter, max_bytes);
if (!ret) {
- ret = zfcp_fc_eval_gpn_ft(gpn_ft, max_entries);
+ ret = zfcp_fc_eval_gpn_ft(gpn_ft, adapter, max_entries);
if (ret == -EAGAIN)
ssleep(1);
else
@@ -704,174 +662,116 @@
zfcp_free_sg_env(gpn_ft, buf_num);
out:
zfcp_fc_wka_port_put(&adapter->gs->ds);
- return ret;
}
-
-void _zfcp_fc_scan_ports_later(struct work_struct *work)
+static void zfcp_fc_ct_els_job_handler(void *data)
{
- zfcp_fc_scan_ports(container_of(work, struct zfcp_adapter, scan_work));
-}
+ struct fc_bsg_job *job = data;
+ struct zfcp_fsf_ct_els *zfcp_ct_els = job->dd_data;
+ int status = zfcp_ct_els->status;
+ int reply_status;
-struct zfcp_els_fc_job {
- struct zfcp_send_els els;
- struct fc_bsg_job *job;
-};
-
-static void zfcp_fc_generic_els_handler(unsigned long data)
-{
- struct zfcp_els_fc_job *els_fc_job = (struct zfcp_els_fc_job *) data;
- struct fc_bsg_job *job = els_fc_job->job;
- struct fc_bsg_reply *reply = job->reply;
-
- if (els_fc_job->els.status) {
- /* request rejected or timed out */
- reply->reply_data.ctels_reply.status = FC_CTELS_STATUS_REJECT;
- goto out;
- }
-
- reply->reply_data.ctels_reply.status = FC_CTELS_STATUS_OK;
- reply->reply_payload_rcv_len = job->reply_payload.payload_len;
-
-out:
- job->state_flags = FC_RQST_STATE_DONE;
- job->job_done(job);
- kfree(els_fc_job);
-}
-
-int zfcp_fc_execute_els_fc_job(struct fc_bsg_job *job)
-{
- struct zfcp_els_fc_job *els_fc_job;
- struct fc_rport *rport = job->rport;
- struct Scsi_Host *shost;
- struct zfcp_adapter *adapter;
- struct zfcp_port *port;
- u8 *port_did;
-
- shost = rport ? rport_to_shost(rport) : job->shost;
- adapter = (struct zfcp_adapter *)shost->hostdata[0];
-
- if (!(atomic_read(&adapter->status) & ZFCP_STATUS_COMMON_OPEN))
- return -EINVAL;
-
- els_fc_job = kzalloc(sizeof(struct zfcp_els_fc_job), GFP_KERNEL);
- if (!els_fc_job)
- return -ENOMEM;
-
- els_fc_job->els.adapter = adapter;
- if (rport) {
- read_lock_irq(&zfcp_data.config_lock);
- port = zfcp_get_port_by_wwpn(adapter, rport->port_name);
- if (port)
- els_fc_job->els.d_id = port->d_id;
- read_unlock_irq(&zfcp_data.config_lock);
- if (!port) {
- kfree(els_fc_job);
- return -EINVAL;
- }
- } else {
- port_did = job->request->rqst_data.h_els.port_id;
- els_fc_job->els.d_id = (port_did[0] << 16) +
- (port_did[1] << 8) + port_did[2];
- }
-
- els_fc_job->els.req = job->request_payload.sg_list;
- els_fc_job->els.resp = job->reply_payload.sg_list;
- els_fc_job->els.handler = zfcp_fc_generic_els_handler;
- els_fc_job->els.handler_data = (unsigned long) els_fc_job;
- els_fc_job->job = job;
-
- return zfcp_fsf_send_els(&els_fc_job->els);
-}
-
-struct zfcp_ct_fc_job {
- struct zfcp_send_ct ct;
- struct fc_bsg_job *job;
-};
-
-static void zfcp_fc_generic_ct_handler(unsigned long data)
-{
- struct zfcp_ct_fc_job *ct_fc_job = (struct zfcp_ct_fc_job *) data;
- struct fc_bsg_job *job = ct_fc_job->job;
-
- job->reply->reply_data.ctels_reply.status = ct_fc_job->ct.status ?
- FC_CTELS_STATUS_REJECT : FC_CTELS_STATUS_OK;
+ reply_status = status ? FC_CTELS_STATUS_REJECT : FC_CTELS_STATUS_OK;
+ job->reply->reply_data.ctels_reply.status = reply_status;
job->reply->reply_payload_rcv_len = job->reply_payload.payload_len;
- job->state_flags = FC_RQST_STATE_DONE;
job->job_done(job);
-
- zfcp_fc_wka_port_put(ct_fc_job->ct.wka_port);
-
- kfree(ct_fc_job);
}
-int zfcp_fc_execute_ct_fc_job(struct fc_bsg_job *job)
+static int zfcp_fc_exec_els_job(struct fc_bsg_job *job,
+ struct zfcp_adapter *adapter)
+{
+ struct zfcp_fsf_ct_els *els = job->dd_data;
+ struct fc_rport *rport = job->rport;
+ struct zfcp_port *port;
+ u32 d_id;
+
+ if (rport) {
+ port = zfcp_get_port_by_wwpn(adapter, rport->port_name);
+ if (!port)
+ return -EINVAL;
+
+ d_id = port->d_id;
+ put_device(&port->sysfs_device);
+ } else
+ d_id = ntoh24(job->request->rqst_data.h_els.port_id);
+
+ return zfcp_fsf_send_els(adapter, d_id, els);
+}
+
+static int zfcp_fc_exec_ct_job(struct fc_bsg_job *job,
+ struct zfcp_adapter *adapter)
{
int ret;
u8 gs_type;
- struct fc_rport *rport = job->rport;
- struct Scsi_Host *shost;
- struct zfcp_adapter *adapter;
- struct zfcp_ct_fc_job *ct_fc_job;
+ struct zfcp_fsf_ct_els *ct = job->dd_data;
+ struct zfcp_fc_wka_port *wka_port;
u32 preamble_word1;
- shost = rport ? rport_to_shost(rport) : job->shost;
-
- adapter = (struct zfcp_adapter *)shost->hostdata[0];
- if (!(atomic_read(&adapter->status) & ZFCP_STATUS_COMMON_OPEN))
- return -EINVAL;
-
- ct_fc_job = kzalloc(sizeof(struct zfcp_ct_fc_job), GFP_KERNEL);
- if (!ct_fc_job)
- return -ENOMEM;
-
preamble_word1 = job->request->rqst_data.r_ct.preamble_word1;
gs_type = (preamble_word1 & 0xff000000) >> 24;
switch (gs_type) {
case FC_FST_ALIAS:
- ct_fc_job->ct.wka_port = &adapter->gs->as;
+ wka_port = &adapter->gs->as;
break;
case FC_FST_MGMT:
- ct_fc_job->ct.wka_port = &adapter->gs->ms;
+ wka_port = &adapter->gs->ms;
break;
case FC_FST_TIME:
- ct_fc_job->ct.wka_port = &adapter->gs->ts;
+ wka_port = &adapter->gs->ts;
break;
case FC_FST_DIR:
- ct_fc_job->ct.wka_port = &adapter->gs->ds;
+ wka_port = &adapter->gs->ds;
break;
default:
- kfree(ct_fc_job);
return -EINVAL; /* no such service */
}
- ret = zfcp_fc_wka_port_get(ct_fc_job->ct.wka_port);
- if (ret) {
- kfree(ct_fc_job);
+ ret = zfcp_fc_wka_port_get(wka_port);
+ if (ret)
return ret;
- }
- ct_fc_job->ct.req = job->request_payload.sg_list;
- ct_fc_job->ct.resp = job->reply_payload.sg_list;
- ct_fc_job->ct.handler = zfcp_fc_generic_ct_handler;
- ct_fc_job->ct.handler_data = (unsigned long) ct_fc_job;
- ct_fc_job->ct.completion = NULL;
- ct_fc_job->job = job;
+ ret = zfcp_fsf_send_ct(wka_port, ct, NULL);
+ if (ret)
+ zfcp_fc_wka_port_put(wka_port);
- ret = zfcp_fsf_send_ct(&ct_fc_job->ct, NULL);
- if (ret) {
- kfree(ct_fc_job);
- zfcp_fc_wka_port_put(ct_fc_job->ct.wka_port);
- }
return ret;
}
+int zfcp_fc_exec_bsg_job(struct fc_bsg_job *job)
+{
+ struct Scsi_Host *shost;
+ struct zfcp_adapter *adapter;
+ struct zfcp_fsf_ct_els *ct_els = job->dd_data;
+
+ shost = job->rport ? rport_to_shost(job->rport) : job->shost;
+ adapter = (struct zfcp_adapter *)shost->hostdata[0];
+
+ if (!(atomic_read(&adapter->status) & ZFCP_STATUS_COMMON_OPEN))
+ return -EINVAL;
+
+ ct_els->req = job->request_payload.sg_list;
+ ct_els->resp = job->reply_payload.sg_list;
+ ct_els->handler = zfcp_fc_ct_els_job_handler;
+ ct_els->handler_data = job;
+
+ switch (job->request->msgcode) {
+ case FC_BSG_RPT_ELS:
+ case FC_BSG_HST_ELS_NOLOGIN:
+ return zfcp_fc_exec_els_job(job, adapter);
+ case FC_BSG_RPT_CT:
+ case FC_BSG_HST_CT:
+ return zfcp_fc_exec_ct_job(job, adapter);
+ default:
+ return -EINVAL;
+ }
+}
+
int zfcp_fc_gs_setup(struct zfcp_adapter *adapter)
{
- struct zfcp_wka_ports *wka_ports;
+ struct zfcp_fc_wka_ports *wka_ports;
- wka_ports = kzalloc(sizeof(struct zfcp_wka_ports), GFP_KERNEL);
+ wka_ports = kzalloc(sizeof(struct zfcp_fc_wka_ports), GFP_KERNEL);
if (!wka_ports)
return -ENOMEM;
@@ -880,7 +780,6 @@
zfcp_fc_wka_port_init(&wka_ports->ts, FC_FID_TIME_SERV, adapter);
zfcp_fc_wka_port_init(&wka_ports->ds, FC_FID_DIR_SERV, adapter);
zfcp_fc_wka_port_init(&wka_ports->as, FC_FID_ALIASES, adapter);
- zfcp_fc_wka_port_init(&wka_ports->ks, FC_FID_SEC_KEY, adapter);
return 0;
}
diff --git a/drivers/s390/scsi/zfcp_fc.h b/drivers/s390/scsi/zfcp_fc.h
new file mode 100644
index 0000000..cb2a366
--- /dev/null
+++ b/drivers/s390/scsi/zfcp_fc.h
@@ -0,0 +1,260 @@
+/*
+ * zfcp device driver
+ *
+ * Fibre Channel related definitions and inline functions for the zfcp
+ * device driver
+ *
+ * Copyright IBM Corporation 2009
+ */
+
+#ifndef ZFCP_FC_H
+#define ZFCP_FC_H
+
+#include <scsi/fc/fc_els.h>
+#include <scsi/fc/fc_fcp.h>
+#include <scsi/fc/fc_ns.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_tcq.h>
+#include "zfcp_fsf.h"
+
+#define ZFCP_FC_CT_SIZE_PAGE (PAGE_SIZE - sizeof(struct fc_ct_hdr))
+#define ZFCP_FC_GPN_FT_ENT_PAGE (ZFCP_FC_CT_SIZE_PAGE \
+ / sizeof(struct fc_gpn_ft_resp))
+#define ZFCP_FC_GPN_FT_NUM_BUFS 4 /* memory pages */
+
+#define ZFCP_FC_GPN_FT_MAX_SIZE (ZFCP_FC_GPN_FT_NUM_BUFS * PAGE_SIZE \
+ - sizeof(struct fc_ct_hdr))
+#define ZFCP_FC_GPN_FT_MAX_ENT (ZFCP_FC_GPN_FT_NUM_BUFS * \
+ (ZFCP_FC_GPN_FT_ENT_PAGE + 1))
+
+/**
+ * struct zfcp_fc_gid_pn_req - container for ct header plus gid_pn request
+ * @ct_hdr: FC GS common transport header
+ * @gid_pn: GID_PN request
+ */
+struct zfcp_fc_gid_pn_req {
+ struct fc_ct_hdr ct_hdr;
+ struct fc_ns_gid_pn gid_pn;
+} __packed;
+
+/**
+ * struct zfcp_fc_gid_pn_resp - container for ct header plus gid_pn response
+ * @ct_hdr: FC GS common transport header
+ * @gid_pn: GID_PN response
+ */
+struct zfcp_fc_gid_pn_resp {
+ struct fc_ct_hdr ct_hdr;
+ struct fc_gid_pn_resp gid_pn;
+} __packed;
+
+/**
+ * struct zfcp_fc_gid_pn - everything required in zfcp for gid_pn request
+ * @ct: data passed to zfcp_fsf for issuing fsf request
+ * @sg_req: scatterlist entry for request data
+ * @sg_resp: scatterlist entry for response data
+ * @gid_pn_req: GID_PN request data
+ * @gid_pn_resp: GID_PN response data
+ */
+struct zfcp_fc_gid_pn {
+ struct zfcp_fsf_ct_els ct;
+ struct scatterlist sg_req;
+ struct scatterlist sg_resp;
+ struct zfcp_fc_gid_pn_req gid_pn_req;
+ struct zfcp_fc_gid_pn_resp gid_pn_resp;
+ struct zfcp_port *port;
+};
+
+/**
+ * struct zfcp_fc_gpn_ft - container for ct header plus gpn_ft request
+ * @ct_hdr: FC GS common transport header
+ * @gpn_ft: GPN_FT request
+ */
+struct zfcp_fc_gpn_ft_req {
+ struct fc_ct_hdr ct_hdr;
+ struct fc_ns_gid_ft gpn_ft;
+} __packed;
+
+/**
+ * struct zfcp_fc_gpn_ft_resp - container for ct header plus gpn_ft response
+ * @ct_hdr: FC GS common transport header
+ * @gpn_ft: Array of gpn_ft response data to fill one memory page
+ */
+struct zfcp_fc_gpn_ft_resp {
+ struct fc_ct_hdr ct_hdr;
+ struct fc_gpn_ft_resp gpn_ft[ZFCP_FC_GPN_FT_ENT_PAGE];
+} __packed;
+
+/**
+ * struct zfcp_fc_gpn_ft - zfcp data for gpn_ft request
+ * @ct: data passed to zfcp_fsf for issuing fsf request
+ * @sg_req: scatter list entry for gpn_ft request
+ * @sg_resp: scatter list entries for gpn_ft responses (per memory page)
+ */
+struct zfcp_fc_gpn_ft {
+ struct zfcp_fsf_ct_els ct;
+ struct scatterlist sg_req;
+ struct scatterlist sg_resp[ZFCP_FC_GPN_FT_NUM_BUFS];
+};
+
+/**
+ * struct zfcp_fc_els_adisc - everything required in zfcp for issuing ELS ADISC
+ * @els: data required for issuing els fsf command
+ * @req: scatterlist entry for ELS ADISC request
+ * @resp: scatterlist entry for ELS ADISC response
+ * @adisc_req: ELS ADISC request data
+ * @adisc_resp: ELS ADISC response data
+ */
+struct zfcp_fc_els_adisc {
+ struct zfcp_fsf_ct_els els;
+ struct scatterlist req;
+ struct scatterlist resp;
+ struct fc_els_adisc adisc_req;
+ struct fc_els_adisc adisc_resp;
+};
+
+/**
+ * enum zfcp_fc_wka_status - FC WKA port status in zfcp
+ * @ZFCP_FC_WKA_PORT_OFFLINE: Port is closed and not in use
+ * @ZFCP_FC_WKA_PORT_CLOSING: The FSF "close port" request is pending
+ * @ZFCP_FC_WKA_PORT_OPENING: The FSF "open port" request is pending
+ * @ZFCP_FC_WKA_PORT_ONLINE: The port is open and the port handle is valid
+ */
+enum zfcp_fc_wka_status {
+ ZFCP_FC_WKA_PORT_OFFLINE,
+ ZFCP_FC_WKA_PORT_CLOSING,
+ ZFCP_FC_WKA_PORT_OPENING,
+ ZFCP_FC_WKA_PORT_ONLINE,
+};
+
+/**
+ * struct zfcp_fc_wka_port - representation of well-known-address (WKA) FC port
+ * @adapter: Pointer to adapter structure this WKA port belongs to
+ * @completion_wq: Wait for completion of open/close command
+ * @status: Current status of WKA port
+ * @refcount: Reference count to keep port open as long as it is in use
+ * @d_id: FC destination id or well-known-address
+ * @handle: FSF handle for the open WKA port
+ * @mutex: Mutex used during opening/closing state changes
+ * @work: For delaying the closing of the WKA port
+ */
+struct zfcp_fc_wka_port {
+ struct zfcp_adapter *adapter;
+ wait_queue_head_t completion_wq;
+ enum zfcp_fc_wka_status status;
+ atomic_t refcount;
+ u32 d_id;
+ u32 handle;
+ struct mutex mutex;
+ struct delayed_work work;
+};
+
+/**
+ * struct zfcp_fc_wka_ports - Data structures for FC generic services
+ * @ms: FC Management service
+ * @ts: FC time service
+ * @ds: FC directory service
+ * @as: FC alias service
+ */
+struct zfcp_fc_wka_ports {
+ struct zfcp_fc_wka_port ms;
+ struct zfcp_fc_wka_port ts;
+ struct zfcp_fc_wka_port ds;
+ struct zfcp_fc_wka_port as;
+};
+
+/**
+ * zfcp_fc_scsi_to_fcp - setup FCP command with data from scsi_cmnd
+ * @fcp: fcp_cmnd to setup
+ * @scsi: scsi_cmnd where to get LUN, task attributes/flags and CDB
+ */
+static inline
+void zfcp_fc_scsi_to_fcp(struct fcp_cmnd *fcp, struct scsi_cmnd *scsi)
+{
+ char tag[2];
+
+ int_to_scsilun(scsi->device->lun, (struct scsi_lun *) &fcp->fc_lun);
+
+ if (scsi_populate_tag_msg(scsi, tag)) {
+ switch (tag[0]) {
+ case MSG_ORDERED_TAG:
+ fcp->fc_pri_ta |= FCP_PTA_ORDERED;
+ break;
+ case MSG_SIMPLE_TAG:
+ fcp->fc_pri_ta |= FCP_PTA_SIMPLE;
+ break;
+ };
+ } else
+ fcp->fc_pri_ta = FCP_PTA_SIMPLE;
+
+ if (scsi->sc_data_direction == DMA_FROM_DEVICE)
+ fcp->fc_flags |= FCP_CFL_RDDATA;
+ if (scsi->sc_data_direction == DMA_TO_DEVICE)
+ fcp->fc_flags |= FCP_CFL_WRDATA;
+
+ memcpy(fcp->fc_cdb, scsi->cmnd, scsi->cmd_len);
+
+ fcp->fc_dl = scsi_bufflen(scsi);
+}
+
+/**
+ * zfcp_fc_fcp_tm - setup FCP command as task management command
+ * @fcp: fcp_cmnd to setup
+ * @dev: scsi_device where to send the task management command
+ * @tm: task management flags to setup tm command
+ */
+static inline
+void zfcp_fc_fcp_tm(struct fcp_cmnd *fcp, struct scsi_device *dev, u8 tm_flags)
+{
+ int_to_scsilun(dev->lun, (struct scsi_lun *) &fcp->fc_lun);
+ fcp->fc_tm_flags |= tm_flags;
+}
+
+/**
+ * zfcp_fc_evap_fcp_rsp - evaluate FCP RSP IU and update scsi_cmnd accordingly
+ * @fcp_rsp: FCP RSP IU to evaluate
+ * @scsi: SCSI command where to update status and sense buffer
+ */
+static inline
+void zfcp_fc_eval_fcp_rsp(struct fcp_resp_with_ext *fcp_rsp,
+ struct scsi_cmnd *scsi)
+{
+ struct fcp_resp_rsp_info *rsp_info;
+ char *sense;
+ u32 sense_len, resid;
+ u8 rsp_flags;
+
+ set_msg_byte(scsi, COMMAND_COMPLETE);
+ scsi->result |= fcp_rsp->resp.fr_status;
+
+ rsp_flags = fcp_rsp->resp.fr_flags;
+
+ if (unlikely(rsp_flags & FCP_RSP_LEN_VAL)) {
+ rsp_info = (struct fcp_resp_rsp_info *) &fcp_rsp[1];
+ if (rsp_info->rsp_code == FCP_TMF_CMPL)
+ set_host_byte(scsi, DID_OK);
+ else {
+ set_host_byte(scsi, DID_ERROR);
+ return;
+ }
+ }
+
+ if (unlikely(rsp_flags & FCP_SNS_LEN_VAL)) {
+ sense = (char *) &fcp_rsp[1];
+ if (rsp_flags & FCP_RSP_LEN_VAL)
+ sense += fcp_rsp->ext.fr_sns_len;
+ sense_len = min(fcp_rsp->ext.fr_sns_len,
+ (u32) SCSI_SENSE_BUFFERSIZE);
+ memcpy(scsi->sense_buffer, sense, sense_len);
+ }
+
+ if (unlikely(rsp_flags & FCP_RESID_UNDER)) {
+ resid = fcp_rsp->ext.fr_resid;
+ scsi_set_resid(scsi, resid);
+ if (scsi_bufflen(scsi) - resid < scsi->underflow &&
+ !(rsp_flags & FCP_SNS_LEN_VAL) &&
+ fcp_rsp->resp.fr_status == SAM_STAT_GOOD)
+ set_host_byte(scsi, DID_ERROR);
+ }
+}
+
+#endif
diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c
index 4e41baa..482dcd9 100644
--- a/drivers/s390/scsi/zfcp_fsf.c
+++ b/drivers/s390/scsi/zfcp_fsf.c
@@ -10,7 +10,9 @@
#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
#include <linux/blktrace_api.h>
+#include <scsi/fc/fc_els.h>
#include "zfcp_ext.h"
+#include "zfcp_fc.h"
#include "zfcp_dbf.h"
static void zfcp_fsf_request_timeout_handler(unsigned long data)
@@ -122,36 +124,32 @@
static void zfcp_fsf_status_read_port_closed(struct zfcp_fsf_req *req)
{
+ unsigned long flags;
struct fsf_status_read_buffer *sr_buf = req->data;
struct zfcp_adapter *adapter = req->adapter;
struct zfcp_port *port;
- int d_id = sr_buf->d_id & ZFCP_DID_MASK;
- unsigned long flags;
+ int d_id = ntoh24(sr_buf->d_id);
- read_lock_irqsave(&zfcp_data.config_lock, flags);
- list_for_each_entry(port, &adapter->port_list_head, list)
+ read_lock_irqsave(&adapter->port_list_lock, flags);
+ list_for_each_entry(port, &adapter->port_list, list)
if (port->d_id == d_id) {
- read_unlock_irqrestore(&zfcp_data.config_lock, flags);
zfcp_erp_port_reopen(port, 0, "fssrpc1", req);
- return;
+ break;
}
- read_unlock_irqrestore(&zfcp_data.config_lock, flags);
+ read_unlock_irqrestore(&adapter->port_list_lock, flags);
}
static void zfcp_fsf_link_down_info_eval(struct zfcp_fsf_req *req, char *id,
struct fsf_link_down_info *link_down)
{
struct zfcp_adapter *adapter = req->adapter;
- unsigned long flags;
if (atomic_read(&adapter->status) & ZFCP_STATUS_ADAPTER_LINK_UNPLUGGED)
return;
atomic_set_mask(ZFCP_STATUS_ADAPTER_LINK_UNPLUGGED, &adapter->status);
- read_lock_irqsave(&zfcp_data.config_lock, flags);
zfcp_scsi_schedule_rports_block(adapter);
- read_unlock_irqrestore(&zfcp_data.config_lock, flags);
if (!link_down)
goto out;
@@ -291,7 +289,7 @@
zfcp_erp_adapter_access_changed(adapter, "fssrh_3",
req);
if (sr_buf->status_subtype & FSF_STATUS_READ_SUB_INCOMING_ELS)
- schedule_work(&adapter->scan_work);
+ queue_work(adapter->work_queue, &adapter->scan_work);
break;
case FSF_STATUS_READ_CFDC_UPDATED:
zfcp_erp_adapter_access_changed(adapter, "fssrh_4", req);
@@ -317,7 +315,6 @@
case FSF_SQ_ULP_DEPENDENT_ERP_REQUIRED:
return;
case FSF_SQ_COMMAND_ABORTED:
- req->status |= ZFCP_STATUS_FSFREQ_ABORTED;
break;
case FSF_SQ_NO_RECOM:
dev_err(&req->adapter->ccw_device->dev,
@@ -358,8 +355,7 @@
zfcp_dbf_hba_fsf_response(req);
if (req->status & ZFCP_STATUS_FSFREQ_DISMISSED) {
- req->status |= ZFCP_STATUS_FSFREQ_ERROR |
- ZFCP_STATUS_FSFREQ_RETRY; /* only for SCSI cmnds. */
+ req->status |= ZFCP_STATUS_FSFREQ_ERROR;
return;
}
@@ -377,7 +373,7 @@
case FSF_PROT_ERROR_STATE:
case FSF_PROT_SEQ_NUMB_ERROR:
zfcp_erp_adapter_reopen(adapter, 0, "fspse_2", req);
- req->status |= ZFCP_STATUS_FSFREQ_RETRY;
+ req->status |= ZFCP_STATUS_FSFREQ_ERROR;
break;
case FSF_PROT_UNSUPP_QTCB_TYPE:
dev_err(&adapter->ccw_device->dev,
@@ -480,20 +476,27 @@
static int zfcp_fsf_exchange_config_evaluate(struct zfcp_fsf_req *req)
{
- struct fsf_qtcb_bottom_config *bottom;
+ struct fsf_qtcb_bottom_config *bottom = &req->qtcb->bottom.config;
struct zfcp_adapter *adapter = req->adapter;
struct Scsi_Host *shost = adapter->scsi_host;
+ struct fc_els_flogi *nsp, *plogi;
- bottom = &req->qtcb->bottom.config;
+ /* adjust pointers for missing command code */
+ nsp = (struct fc_els_flogi *) ((u8 *)&bottom->nport_serv_param
+ - sizeof(u32));
+ plogi = (struct fc_els_flogi *) ((u8 *)&bottom->plogi_payload
+ - sizeof(u32));
if (req->data)
memcpy(req->data, bottom, sizeof(*bottom));
- fc_host_node_name(shost) = bottom->nport_serv_param.wwnn;
- fc_host_port_name(shost) = bottom->nport_serv_param.wwpn;
- fc_host_port_id(shost) = bottom->s_id & ZFCP_DID_MASK;
+ fc_host_port_name(shost) = nsp->fl_wwpn;
+ fc_host_node_name(shost) = nsp->fl_wwnn;
+ fc_host_port_id(shost) = ntoh24(bottom->s_id);
fc_host_speed(shost) = bottom->fc_link_speed;
fc_host_supported_classes(shost) = FC_COS_CLASS2 | FC_COS_CLASS3;
+ fc_host_supported_fc4s(shost)[2] = 1; /* FCP */
+ fc_host_active_fc4s(shost)[2] = 1; /* FCP */
adapter->hydra_version = bottom->adapter_type;
adapter->timer_ticks = bottom->timer_interval;
@@ -503,9 +506,9 @@
switch (bottom->fc_topology) {
case FSF_TOPO_P2P:
- adapter->peer_d_id = bottom->peer_d_id & ZFCP_DID_MASK;
- adapter->peer_wwpn = bottom->plogi_payload.wwpn;
- adapter->peer_wwnn = bottom->plogi_payload.wwnn;
+ adapter->peer_d_id = ntoh24(bottom->peer_d_id);
+ adapter->peer_wwpn = plogi->fl_wwpn;
+ adapter->peer_wwnn = plogi->fl_wwnn;
fc_host_port_type(shost) = FC_PORTTYPE_PTP;
break;
case FSF_TOPO_FABRIC:
@@ -881,13 +884,11 @@
break;
case FSF_PORT_BOXED:
zfcp_erp_port_boxed(unit->port, "fsafch3", req);
- req->status |= ZFCP_STATUS_FSFREQ_ERROR |
- ZFCP_STATUS_FSFREQ_RETRY;
+ req->status |= ZFCP_STATUS_FSFREQ_ERROR;
break;
case FSF_LUN_BOXED:
zfcp_erp_unit_boxed(unit, "fsafch4", req);
- req->status |= ZFCP_STATUS_FSFREQ_ERROR |
- ZFCP_STATUS_FSFREQ_RETRY;
+ req->status |= ZFCP_STATUS_FSFREQ_ERROR;
break;
case FSF_ADAPTER_STATUS_AVAILABLE:
switch (fsq->word[0]) {
@@ -958,10 +959,10 @@
static void zfcp_fsf_send_ct_handler(struct zfcp_fsf_req *req)
{
struct zfcp_adapter *adapter = req->adapter;
- struct zfcp_send_ct *send_ct = req->data;
+ struct zfcp_fsf_ct_els *ct = req->data;
struct fsf_qtcb_header *header = &req->qtcb->header;
- send_ct->status = -EINVAL;
+ ct->status = -EINVAL;
if (req->status & ZFCP_STATUS_FSFREQ_ERROR)
goto skip_fsfstatus;
@@ -969,7 +970,7 @@
switch (header->fsf_status) {
case FSF_GOOD:
zfcp_dbf_san_ct_response(req);
- send_ct->status = 0;
+ ct->status = 0;
break;
case FSF_SERVICE_CLASS_NOT_SUPPORTED:
zfcp_fsf_class_not_supp(req);
@@ -985,8 +986,7 @@
case FSF_ACCESS_DENIED:
break;
case FSF_PORT_BOXED:
- req->status |= ZFCP_STATUS_FSFREQ_ERROR |
- ZFCP_STATUS_FSFREQ_RETRY;
+ req->status |= ZFCP_STATUS_FSFREQ_ERROR;
break;
case FSF_PORT_HANDLE_NOT_VALID:
zfcp_erp_adapter_reopen(adapter, 0, "fsscth1", req);
@@ -1001,8 +1001,8 @@
}
skip_fsfstatus:
- if (send_ct->handler)
- send_ct->handler(send_ct->handler_data);
+ if (ct->handler)
+ ct->handler(ct->handler_data);
}
static void zfcp_fsf_setup_ct_els_unchained(struct qdio_buffer_element *sbale,
@@ -1071,15 +1071,17 @@
int max_sbals)
{
int ret;
+ unsigned int fcp_chan_timeout;
ret = zfcp_fsf_setup_ct_els_sbals(req, sg_req, sg_resp, max_sbals);
if (ret)
return ret;
/* common settings for ct/gs and els requests */
+ fcp_chan_timeout = 2 * FC_DEF_R_A_TOV / 1000;
req->qtcb->bottom.support.service_class = FSF_CLASS_3;
- req->qtcb->bottom.support.timeout = 2 * R_A_TOV;
- zfcp_fsf_start_timer(req, (2 * R_A_TOV + 10) * HZ);
+ req->qtcb->bottom.support.timeout = fcp_chan_timeout;
+ zfcp_fsf_start_timer(req, (fcp_chan_timeout + 10) * HZ);
return 0;
}
@@ -1089,9 +1091,9 @@
* @ct: pointer to struct zfcp_send_ct with data for request
* @pool: if non-null this mempool is used to allocate struct zfcp_fsf_req
*/
-int zfcp_fsf_send_ct(struct zfcp_send_ct *ct, mempool_t *pool)
+int zfcp_fsf_send_ct(struct zfcp_fc_wka_port *wka_port,
+ struct zfcp_fsf_ct_els *ct, mempool_t *pool)
{
- struct zfcp_wka_port *wka_port = ct->wka_port;
struct zfcp_qdio *qdio = wka_port->adapter->qdio;
struct zfcp_fsf_req *req;
int ret = -EIO;
@@ -1117,7 +1119,7 @@
req->qtcb->header.port_handle = wka_port->handle;
req->data = ct;
- zfcp_dbf_san_ct_request(req);
+ zfcp_dbf_san_ct_request(req, wka_port->d_id);
ret = zfcp_fsf_req_send(req);
if (ret)
@@ -1134,7 +1136,7 @@
static void zfcp_fsf_send_els_handler(struct zfcp_fsf_req *req)
{
- struct zfcp_send_els *send_els = req->data;
+ struct zfcp_fsf_ct_els *send_els = req->data;
struct zfcp_port *port = send_els->port;
struct fsf_qtcb_header *header = &req->qtcb->header;
@@ -1154,9 +1156,6 @@
case FSF_ADAPTER_STATUS_AVAILABLE:
switch (header->fsf_status_qual.word[0]){
case FSF_SQ_INVOKE_LINK_TEST_PROCEDURE:
- if (port && (send_els->ls_code != ZFCP_LS_ADISC))
- zfcp_fc_test_link(port);
- /*fall through */
case FSF_SQ_ULP_DEPENDENT_ERP_REQUIRED:
case FSF_SQ_RETRY_IF_POSSIBLE:
req->status |= ZFCP_STATUS_FSFREQ_ERROR;
@@ -1188,10 +1187,11 @@
* zfcp_fsf_send_els - initiate an ELS command (FC-FS)
* @els: pointer to struct zfcp_send_els with data for the command
*/
-int zfcp_fsf_send_els(struct zfcp_send_els *els)
+int zfcp_fsf_send_els(struct zfcp_adapter *adapter, u32 d_id,
+ struct zfcp_fsf_ct_els *els)
{
struct zfcp_fsf_req *req;
- struct zfcp_qdio *qdio = els->adapter->qdio;
+ struct zfcp_qdio *qdio = adapter->qdio;
int ret = -EIO;
spin_lock_bh(&qdio->req_q_lock);
@@ -1211,7 +1211,7 @@
if (ret)
goto failed_send;
- req->qtcb->bottom.support.d_id = els->d_id;
+ hton24(req->qtcb->bottom.support.d_id, d_id);
req->handler = zfcp_fsf_send_els_handler;
req->data = els;
@@ -1422,7 +1422,7 @@
{
struct zfcp_port *port = req->data;
struct fsf_qtcb_header *header = &req->qtcb->header;
- struct fsf_plogi *plogi;
+ struct fc_els_flogi *plogi;
if (req->status & ZFCP_STATUS_FSFREQ_ERROR)
goto out;
@@ -1472,23 +1472,10 @@
* another GID_PN straight after a port has been opened.
* Alternately, an ADISC/PDISC ELS should suffice, as well.
*/
- plogi = (struct fsf_plogi *) req->qtcb->bottom.support.els;
+ plogi = (struct fc_els_flogi *) req->qtcb->bottom.support.els;
if (req->qtcb->bottom.support.els1_length >=
- FSF_PLOGI_MIN_LEN) {
- if (plogi->serv_param.wwpn != port->wwpn) {
- port->d_id = 0;
- dev_warn(&port->adapter->ccw_device->dev,
- "A port opened with WWPN 0x%016Lx "
- "returned data that identifies it as "
- "WWPN 0x%016Lx\n",
- (unsigned long long) port->wwpn,
- (unsigned long long)
- plogi->serv_param.wwpn);
- } else {
- port->wwnn = plogi->serv_param.wwnn;
+ FSF_PLOGI_MIN_LEN)
zfcp_fc_plogi_evaluate(port, plogi);
- }
- }
break;
case FSF_UNKNOWN_OP_SUBTYPE:
req->status |= ZFCP_STATUS_FSFREQ_ERROR;
@@ -1496,7 +1483,7 @@
}
out:
- zfcp_port_put(port);
+ put_device(&port->sysfs_device);
}
/**
@@ -1530,18 +1517,18 @@
sbale[1].flags |= SBAL_FLAGS_LAST_ENTRY;
req->handler = zfcp_fsf_open_port_handler;
- req->qtcb->bottom.support.d_id = port->d_id;
+ hton24(req->qtcb->bottom.support.d_id, port->d_id);
req->data = port;
req->erp_action = erp_action;
erp_action->fsf_req = req;
- zfcp_port_get(port);
+ get_device(&port->sysfs_device);
zfcp_fsf_start_erp_timer(req);
retval = zfcp_fsf_req_send(req);
if (retval) {
zfcp_fsf_req_free(req);
erp_action->fsf_req = NULL;
- zfcp_port_put(port);
+ put_device(&port->sysfs_device);
}
out:
spin_unlock_bh(&qdio->req_q_lock);
@@ -1618,11 +1605,11 @@
static void zfcp_fsf_open_wka_port_handler(struct zfcp_fsf_req *req)
{
- struct zfcp_wka_port *wka_port = req->data;
+ struct zfcp_fc_wka_port *wka_port = req->data;
struct fsf_qtcb_header *header = &req->qtcb->header;
if (req->status & ZFCP_STATUS_FSFREQ_ERROR) {
- wka_port->status = ZFCP_WKA_PORT_OFFLINE;
+ wka_port->status = ZFCP_FC_WKA_PORT_OFFLINE;
goto out;
}
@@ -1635,13 +1622,13 @@
req->status |= ZFCP_STATUS_FSFREQ_ERROR;
/* fall through */
case FSF_ACCESS_DENIED:
- wka_port->status = ZFCP_WKA_PORT_OFFLINE;
+ wka_port->status = ZFCP_FC_WKA_PORT_OFFLINE;
break;
case FSF_GOOD:
wka_port->handle = header->port_handle;
/* fall through */
case FSF_PORT_ALREADY_OPEN:
- wka_port->status = ZFCP_WKA_PORT_ONLINE;
+ wka_port->status = ZFCP_FC_WKA_PORT_ONLINE;
}
out:
wake_up(&wka_port->completion_wq);
@@ -1649,10 +1636,10 @@
/**
* zfcp_fsf_open_wka_port - create and send open wka-port request
- * @wka_port: pointer to struct zfcp_wka_port
+ * @wka_port: pointer to struct zfcp_fc_wka_port
* Returns: 0 on success, error otherwise
*/
-int zfcp_fsf_open_wka_port(struct zfcp_wka_port *wka_port)
+int zfcp_fsf_open_wka_port(struct zfcp_fc_wka_port *wka_port)
{
struct qdio_buffer_element *sbale;
struct zfcp_qdio *qdio = wka_port->adapter->qdio;
@@ -1677,7 +1664,7 @@
sbale[1].flags |= SBAL_FLAGS_LAST_ENTRY;
req->handler = zfcp_fsf_open_wka_port_handler;
- req->qtcb->bottom.support.d_id = wka_port->d_id;
+ hton24(req->qtcb->bottom.support.d_id, wka_port->d_id);
req->data = wka_port;
zfcp_fsf_start_timer(req, ZFCP_FSF_REQUEST_TIMEOUT);
@@ -1691,23 +1678,23 @@
static void zfcp_fsf_close_wka_port_handler(struct zfcp_fsf_req *req)
{
- struct zfcp_wka_port *wka_port = req->data;
+ struct zfcp_fc_wka_port *wka_port = req->data;
if (req->qtcb->header.fsf_status == FSF_PORT_HANDLE_NOT_VALID) {
req->status |= ZFCP_STATUS_FSFREQ_ERROR;
zfcp_erp_adapter_reopen(wka_port->adapter, 0, "fscwph1", req);
}
- wka_port->status = ZFCP_WKA_PORT_OFFLINE;
+ wka_port->status = ZFCP_FC_WKA_PORT_OFFLINE;
wake_up(&wka_port->completion_wq);
}
/**
* zfcp_fsf_close_wka_port - create and send close wka port request
- * @erp_action: pointer to struct zfcp_erp_action
+ * @wka_port: WKA port to open
* Returns: 0 on success, error otherwise
*/
-int zfcp_fsf_close_wka_port(struct zfcp_wka_port *wka_port)
+int zfcp_fsf_close_wka_port(struct zfcp_fc_wka_port *wka_port)
{
struct qdio_buffer_element *sbale;
struct zfcp_qdio *qdio = wka_port->adapter->qdio;
@@ -1765,13 +1752,13 @@
/* can't use generic zfcp_erp_modify_port_status because
* ZFCP_STATUS_COMMON_OPEN must not be reset for the port */
atomic_clear_mask(ZFCP_STATUS_PORT_PHYS_OPEN, &port->status);
- list_for_each_entry(unit, &port->unit_list_head, list)
+ read_lock(&port->unit_list_lock);
+ list_for_each_entry(unit, &port->unit_list, list)
atomic_clear_mask(ZFCP_STATUS_COMMON_OPEN,
&unit->status);
+ read_unlock(&port->unit_list_lock);
zfcp_erp_port_boxed(port, "fscpph2", req);
- req->status |= ZFCP_STATUS_FSFREQ_ERROR |
- ZFCP_STATUS_FSFREQ_RETRY;
-
+ req->status |= ZFCP_STATUS_FSFREQ_ERROR;
break;
case FSF_ADAPTER_STATUS_AVAILABLE:
switch (header->fsf_status_qual.word[0]) {
@@ -1787,9 +1774,11 @@
* ZFCP_STATUS_COMMON_OPEN must not be reset for the port
*/
atomic_clear_mask(ZFCP_STATUS_PORT_PHYS_OPEN, &port->status);
- list_for_each_entry(unit, &port->unit_list_head, list)
+ read_lock(&port->unit_list_lock);
+ list_for_each_entry(unit, &port->unit_list, list)
atomic_clear_mask(ZFCP_STATUS_COMMON_OPEN,
&unit->status);
+ read_unlock(&port->unit_list_lock);
break;
}
}
@@ -1873,8 +1862,7 @@
break;
case FSF_PORT_BOXED:
zfcp_erp_port_boxed(unit->port, "fsouh_2", req);
- req->status |= ZFCP_STATUS_FSFREQ_ERROR |
- ZFCP_STATUS_FSFREQ_RETRY;
+ req->status |= ZFCP_STATUS_FSFREQ_ERROR;
break;
case FSF_LUN_SHARING_VIOLATION:
if (header->fsf_status_qual.word[0])
@@ -2036,8 +2024,7 @@
break;
case FSF_PORT_BOXED:
zfcp_erp_port_boxed(unit->port, "fscuh_3", req);
- req->status |= ZFCP_STATUS_FSFREQ_ERROR |
- ZFCP_STATUS_FSFREQ_RETRY;
+ req->status |= ZFCP_STATUS_FSFREQ_ERROR;
break;
case FSF_ADAPTER_STATUS_AVAILABLE:
switch (req->qtcb->header.fsf_status_qual.word[0]) {
@@ -2109,72 +2096,57 @@
lat_rec->max = max(lat_rec->max, lat);
}
-static void zfcp_fsf_req_latency(struct zfcp_fsf_req *req)
+static void zfcp_fsf_req_trace(struct zfcp_fsf_req *req, struct scsi_cmnd *scsi)
{
- struct fsf_qual_latency_info *lat_inf;
- struct latency_cont *lat;
+ struct fsf_qual_latency_info *lat_in;
+ struct latency_cont *lat = NULL;
struct zfcp_unit *unit = req->unit;
+ struct zfcp_blk_drv_data blktrc;
+ int ticks = req->adapter->timer_ticks;
- lat_inf = &req->qtcb->prefix.prot_status_qual.latency_info;
+ lat_in = &req->qtcb->prefix.prot_status_qual.latency_info;
- switch (req->qtcb->bottom.io.data_direction) {
- case FSF_DATADIR_READ:
- lat = &unit->latencies.read;
- break;
- case FSF_DATADIR_WRITE:
- lat = &unit->latencies.write;
- break;
- case FSF_DATADIR_CMND:
- lat = &unit->latencies.cmd;
- break;
- default:
- return;
+ blktrc.flags = 0;
+ blktrc.magic = ZFCP_BLK_DRV_DATA_MAGIC;
+ if (req->status & ZFCP_STATUS_FSFREQ_ERROR)
+ blktrc.flags |= ZFCP_BLK_REQ_ERROR;
+ blktrc.inb_usage = req->queue_req.qdio_inb_usage;
+ blktrc.outb_usage = req->queue_req.qdio_outb_usage;
+
+ if (req->adapter->adapter_features & FSF_FEATURE_MEASUREMENT_DATA) {
+ blktrc.flags |= ZFCP_BLK_LAT_VALID;
+ blktrc.channel_lat = lat_in->channel_lat * ticks;
+ blktrc.fabric_lat = lat_in->fabric_lat * ticks;
+
+ switch (req->qtcb->bottom.io.data_direction) {
+ case FSF_DATADIR_READ:
+ lat = &unit->latencies.read;
+ break;
+ case FSF_DATADIR_WRITE:
+ lat = &unit->latencies.write;
+ break;
+ case FSF_DATADIR_CMND:
+ lat = &unit->latencies.cmd;
+ break;
+ }
+
+ if (lat) {
+ spin_lock(&unit->latencies.lock);
+ zfcp_fsf_update_lat(&lat->channel, lat_in->channel_lat);
+ zfcp_fsf_update_lat(&lat->fabric, lat_in->fabric_lat);
+ lat->counter++;
+ spin_unlock(&unit->latencies.lock);
+ }
}
- spin_lock(&unit->latencies.lock);
- zfcp_fsf_update_lat(&lat->channel, lat_inf->channel_lat);
- zfcp_fsf_update_lat(&lat->fabric, lat_inf->fabric_lat);
- lat->counter++;
- spin_unlock(&unit->latencies.lock);
+ blk_add_driver_data(scsi->request->q, scsi->request, &blktrc,
+ sizeof(blktrc));
}
-#ifdef CONFIG_BLK_DEV_IO_TRACE
-static void zfcp_fsf_trace_latency(struct zfcp_fsf_req *fsf_req)
-{
- struct fsf_qual_latency_info *lat_inf;
- struct scsi_cmnd *scsi_cmnd = (struct scsi_cmnd *)fsf_req->data;
- struct request *req = scsi_cmnd->request;
- struct zfcp_blk_drv_data trace;
- int ticks = fsf_req->adapter->timer_ticks;
-
- trace.flags = 0;
- trace.magic = ZFCP_BLK_DRV_DATA_MAGIC;
- if (fsf_req->adapter->adapter_features & FSF_FEATURE_MEASUREMENT_DATA) {
- trace.flags |= ZFCP_BLK_LAT_VALID;
- lat_inf = &fsf_req->qtcb->prefix.prot_status_qual.latency_info;
- trace.channel_lat = lat_inf->channel_lat * ticks;
- trace.fabric_lat = lat_inf->fabric_lat * ticks;
- }
- if (fsf_req->status & ZFCP_STATUS_FSFREQ_ERROR)
- trace.flags |= ZFCP_BLK_REQ_ERROR;
- trace.inb_usage = fsf_req->queue_req.qdio_inb_usage;
- trace.outb_usage = fsf_req->queue_req.qdio_outb_usage;
-
- blk_add_driver_data(req->q, req, &trace, sizeof(trace));
-}
-#else
-static inline void zfcp_fsf_trace_latency(struct zfcp_fsf_req *fsf_req)
-{
-}
-#endif
-
static void zfcp_fsf_send_fcp_command_task_handler(struct zfcp_fsf_req *req)
{
struct scsi_cmnd *scpnt;
- struct fcp_rsp_iu *fcp_rsp_iu = (struct fcp_rsp_iu *)
- &(req->qtcb->bottom.io.fcp_rsp);
- u32 sns_len;
- char *fcp_rsp_info = (unsigned char *) &fcp_rsp_iu[1];
+ struct fcp_resp_with_ext *fcp_rsp;
unsigned long flags;
read_lock_irqsave(&req->adapter->abort_lock, flags);
@@ -2185,50 +2157,16 @@
return;
}
- if (unlikely(req->status & ZFCP_STATUS_FSFREQ_ABORTED)) {
- set_host_byte(scpnt, DID_SOFT_ERROR);
- goto skip_fsfstatus;
- }
-
if (unlikely(req->status & ZFCP_STATUS_FSFREQ_ERROR)) {
- set_host_byte(scpnt, DID_ERROR);
+ set_host_byte(scpnt, DID_TRANSPORT_DISRUPTED);
goto skip_fsfstatus;
}
- set_msg_byte(scpnt, COMMAND_COMPLETE);
+ fcp_rsp = (struct fcp_resp_with_ext *) &req->qtcb->bottom.io.fcp_rsp;
+ zfcp_fc_eval_fcp_rsp(fcp_rsp, scpnt);
- scpnt->result |= fcp_rsp_iu->scsi_status;
+ zfcp_fsf_req_trace(req, scpnt);
- if (req->adapter->adapter_features & FSF_FEATURE_MEASUREMENT_DATA)
- zfcp_fsf_req_latency(req);
-
- zfcp_fsf_trace_latency(req);
-
- if (unlikely(fcp_rsp_iu->validity.bits.fcp_rsp_len_valid)) {
- if (fcp_rsp_info[3] == RSP_CODE_GOOD)
- set_host_byte(scpnt, DID_OK);
- else {
- set_host_byte(scpnt, DID_ERROR);
- goto skip_fsfstatus;
- }
- }
-
- if (unlikely(fcp_rsp_iu->validity.bits.fcp_sns_len_valid)) {
- sns_len = FSF_FCP_RSP_SIZE - sizeof(struct fcp_rsp_iu) +
- fcp_rsp_iu->fcp_rsp_len;
- sns_len = min(sns_len, (u32) SCSI_SENSE_BUFFERSIZE);
- sns_len = min(sns_len, fcp_rsp_iu->fcp_sns_len);
-
- memcpy(scpnt->sense_buffer,
- zfcp_get_fcp_sns_info_ptr(fcp_rsp_iu), sns_len);
- }
-
- if (unlikely(fcp_rsp_iu->validity.bits.fcp_resid_under)) {
- scsi_set_resid(scpnt, fcp_rsp_iu->fcp_resid);
- if (scsi_bufflen(scpnt) - scsi_get_resid(scpnt) <
- scpnt->underflow)
- set_host_byte(scpnt, DID_ERROR);
- }
skip_fsfstatus:
if (scpnt->result != 0)
zfcp_dbf_scsi_result("erro", 3, req->adapter->dbf, scpnt, req);
@@ -2250,11 +2188,13 @@
static void zfcp_fsf_send_fcp_ctm_handler(struct zfcp_fsf_req *req)
{
- struct fcp_rsp_iu *fcp_rsp_iu = (struct fcp_rsp_iu *)
- &(req->qtcb->bottom.io.fcp_rsp);
- char *fcp_rsp_info = (unsigned char *) &fcp_rsp_iu[1];
+ struct fcp_resp_with_ext *fcp_rsp;
+ struct fcp_resp_rsp_info *rsp_info;
- if ((fcp_rsp_info[3] != RSP_CODE_GOOD) ||
+ fcp_rsp = (struct fcp_resp_with_ext *) &req->qtcb->bottom.io.fcp_rsp;
+ rsp_info = (struct fcp_resp_rsp_info *) &fcp_rsp[1];
+
+ if ((rsp_info->rsp_code != FCP_TMF_CMPL) ||
(req->status & ZFCP_STATUS_FSFREQ_ERROR))
req->status |= ZFCP_STATUS_FSFREQ_TMFUNCFAILED;
}
@@ -2314,13 +2254,11 @@
break;
case FSF_PORT_BOXED:
zfcp_erp_port_boxed(unit->port, "fssfch5", req);
- req->status |= ZFCP_STATUS_FSFREQ_ERROR |
- ZFCP_STATUS_FSFREQ_RETRY;
+ req->status |= ZFCP_STATUS_FSFREQ_ERROR;
break;
case FSF_LUN_BOXED:
zfcp_erp_unit_boxed(unit, "fssfch6", req);
- req->status |= ZFCP_STATUS_FSFREQ_ERROR |
- ZFCP_STATUS_FSFREQ_RETRY;
+ req->status |= ZFCP_STATUS_FSFREQ_ERROR;
break;
case FSF_ADAPTER_STATUS_AVAILABLE:
if (header->fsf_status_qual.word[0] ==
@@ -2335,24 +2273,10 @@
else {
zfcp_fsf_send_fcp_command_task_handler(req);
req->unit = NULL;
- zfcp_unit_put(unit);
+ put_device(&unit->sysfs_device);
}
}
-static void zfcp_set_fcp_dl(struct fcp_cmnd_iu *fcp_cmd, u32 fcp_dl)
-{
- u32 *fcp_dl_ptr;
-
- /*
- * fcp_dl_addr = start address of fcp_cmnd structure +
- * size of fixed part + size of dynamically sized add_dcp_cdb field
- * SEE FCP-2 documentation
- */
- fcp_dl_ptr = (u32 *) ((unsigned char *) &fcp_cmd[1] +
- (fcp_cmd->add_fcp_cdb_length << 2));
- *fcp_dl_ptr = fcp_dl;
-}
-
/**
* zfcp_fsf_send_fcp_command_task - initiate an FCP command (for a SCSI command)
* @unit: unit where command is sent to
@@ -2362,7 +2286,7 @@
struct scsi_cmnd *scsi_cmnd)
{
struct zfcp_fsf_req *req;
- struct fcp_cmnd_iu *fcp_cmnd_iu;
+ struct fcp_cmnd *fcp_cmnd;
unsigned int sbtype = SBAL_FLAGS0_TYPE_READ;
int real_bytes, retval = -EIO;
struct zfcp_adapter *adapter = unit->port->adapter;
@@ -2387,23 +2311,21 @@
}
req->status |= ZFCP_STATUS_FSFREQ_CLEANUP;
- zfcp_unit_get(unit);
+ get_device(&unit->sysfs_device);
req->unit = unit;
req->data = scsi_cmnd;
req->handler = zfcp_fsf_send_fcp_command_handler;
req->qtcb->header.lun_handle = unit->handle;
req->qtcb->header.port_handle = unit->port->handle;
req->qtcb->bottom.io.service_class = FSF_CLASS_3;
+ req->qtcb->bottom.io.fcp_cmnd_length = FCP_CMND_LEN;
scsi_cmnd->host_scribble = (unsigned char *) req->req_id;
- fcp_cmnd_iu = (struct fcp_cmnd_iu *) &(req->qtcb->bottom.io.fcp_cmnd);
- fcp_cmnd_iu->fcp_lun = unit->fcp_lun;
/*
* set depending on data direction:
* data direction bits in SBALE (SB Type)
* data direction bits in QTCB
- * data direction bits in FCP_CMND IU
*/
switch (scsi_cmnd->sc_data_direction) {
case DMA_NONE:
@@ -2411,32 +2333,17 @@
break;
case DMA_FROM_DEVICE:
req->qtcb->bottom.io.data_direction = FSF_DATADIR_READ;
- fcp_cmnd_iu->rddata = 1;
break;
case DMA_TO_DEVICE:
req->qtcb->bottom.io.data_direction = FSF_DATADIR_WRITE;
sbtype = SBAL_FLAGS0_TYPE_WRITE;
- fcp_cmnd_iu->wddata = 1;
break;
case DMA_BIDIRECTIONAL:
goto failed_scsi_cmnd;
}
- if (likely((scsi_cmnd->device->simple_tags) ||
- ((atomic_read(&unit->status) & ZFCP_STATUS_UNIT_READONLY) &&
- (atomic_read(&unit->status) & ZFCP_STATUS_UNIT_SHARED))))
- fcp_cmnd_iu->task_attribute = SIMPLE_Q;
- else
- fcp_cmnd_iu->task_attribute = UNTAGGED;
-
- if (unlikely(scsi_cmnd->cmd_len > FCP_CDB_LENGTH))
- fcp_cmnd_iu->add_fcp_cdb_length =
- (scsi_cmnd->cmd_len - FCP_CDB_LENGTH) >> 2;
-
- memcpy(fcp_cmnd_iu->fcp_cdb, scsi_cmnd->cmnd, scsi_cmnd->cmd_len);
-
- req->qtcb->bottom.io.fcp_cmnd_length = sizeof(struct fcp_cmnd_iu) +
- fcp_cmnd_iu->add_fcp_cdb_length + sizeof(u32);
+ fcp_cmnd = (struct fcp_cmnd *) &req->qtcb->bottom.io.fcp_cmnd;
+ zfcp_fc_scsi_to_fcp(fcp_cmnd, scsi_cmnd);
real_bytes = zfcp_qdio_sbals_from_sg(qdio, &req->queue_req, sbtype,
scsi_sglist(scsi_cmnd),
@@ -2454,8 +2361,6 @@
goto failed_scsi_cmnd;
}
- zfcp_set_fcp_dl(fcp_cmnd_iu, real_bytes);
-
retval = zfcp_fsf_req_send(req);
if (unlikely(retval))
goto failed_scsi_cmnd;
@@ -2463,7 +2368,7 @@
goto out;
failed_scsi_cmnd:
- zfcp_unit_put(unit);
+ put_device(&unit->sysfs_device);
zfcp_fsf_req_free(req);
scsi_cmnd->host_scribble = NULL;
out:
@@ -2481,7 +2386,7 @@
{
struct qdio_buffer_element *sbale;
struct zfcp_fsf_req *req = NULL;
- struct fcp_cmnd_iu *fcp_cmnd_iu;
+ struct fcp_cmnd *fcp_cmnd;
struct zfcp_qdio *qdio = unit->port->adapter->qdio;
if (unlikely(!(atomic_read(&unit->status) &
@@ -2507,16 +2412,14 @@
req->qtcb->header.port_handle = unit->port->handle;
req->qtcb->bottom.io.data_direction = FSF_DATADIR_CMND;
req->qtcb->bottom.io.service_class = FSF_CLASS_3;
- req->qtcb->bottom.io.fcp_cmnd_length = sizeof(struct fcp_cmnd_iu) +
- sizeof(u32);
+ req->qtcb->bottom.io.fcp_cmnd_length = FCP_CMND_LEN;
sbale = zfcp_qdio_sbale_req(qdio, &req->queue_req);
sbale[0].flags |= SBAL_FLAGS0_TYPE_WRITE;
sbale[1].flags |= SBAL_FLAGS_LAST_ENTRY;
- fcp_cmnd_iu = (struct fcp_cmnd_iu *) &req->qtcb->bottom.io.fcp_cmnd;
- fcp_cmnd_iu->fcp_lun = unit->fcp_lun;
- fcp_cmnd_iu->task_management_flags = tm_flags;
+ fcp_cmnd = (struct fcp_cmnd *) &req->qtcb->bottom.io.fcp_cmnd;
+ zfcp_fc_fcp_tm(fcp_cmnd, unit->device, tm_flags);
zfcp_fsf_start_timer(req, ZFCP_SCSI_ER_TIMEOUT);
if (!zfcp_fsf_req_send(req))
diff --git a/drivers/s390/scsi/zfcp_fsf.h b/drivers/s390/scsi/zfcp_fsf.h
index dcc7c1d..b3de682 100644
--- a/drivers/s390/scsi/zfcp_fsf.h
+++ b/drivers/s390/scsi/zfcp_fsf.h
@@ -11,6 +11,7 @@
#include <linux/pfn.h>
#include <linux/scatterlist.h>
+#include <scsi/libfc.h>
#define FSF_QTCB_CURRENT_VERSION 0x00000001
@@ -228,7 +229,8 @@
u32 length;
u32 res1;
struct fsf_queue_designator queue_designator;
- u32 d_id;
+ u8 res2;
+ u8 d_id[3];
u32 class;
u64 fcp_lun;
u8 res3[24];
@@ -309,22 +311,7 @@
u8 res4[16];
} __attribute__ ((packed));
-struct fsf_nport_serv_param {
- u8 common_serv_param[16];
- u64 wwpn;
- u64 wwnn;
- u8 class1_serv_param[16];
- u8 class2_serv_param[16];
- u8 class3_serv_param[16];
- u8 class4_serv_param[16];
- u8 vendor_version_level[16];
-} __attribute__ ((packed));
-
#define FSF_PLOGI_MIN_LEN 112
-struct fsf_plogi {
- u32 code;
- struct fsf_nport_serv_param serv_param;
-} __attribute__ ((packed));
#define FSF_FCP_CMND_SIZE 288
#define FSF_FCP_RSP_SIZE 128
@@ -342,8 +329,8 @@
struct fsf_qtcb_bottom_support {
u32 operation_subtype;
- u8 res1[12];
- u32 d_id;
+ u8 res1[13];
+ u8 d_id[3];
u32 option;
u64 fcp_lun;
u64 res2;
@@ -372,18 +359,18 @@
u32 fc_topology;
u32 fc_link_speed;
u32 adapter_type;
- u32 peer_d_id;
+ u8 res0;
+ u8 peer_d_id[3];
u8 res1[2];
u16 timer_interval;
- u8 res2[8];
- u32 s_id;
- struct fsf_nport_serv_param nport_serv_param;
- u8 reserved_nport_serv_param[16];
+ u8 res2[9];
+ u8 s_id[3];
+ u8 nport_serv_param[128];
u8 res3[8];
u32 adapter_ports;
u32 hardware_version;
u8 serial_number[32];
- struct fsf_nport_serv_param plogi_payload;
+ u8 plogi_payload[112];
struct fsf_statistics_info stat_info;
u8 res4[112];
} __attribute__ ((packed));
@@ -450,4 +437,22 @@
u64 fabric_lat;
} __attribute__ ((packed));
+/**
+ * struct zfcp_fsf_ct_els - zfcp data for ct or els request
+ * @req: scatter-gather list for request
+ * @resp: scatter-gather list for response
+ * @handler: handler function (called for response to the request)
+ * @handler_data: data passed to handler function
+ * @port: Optional pointer to port for zfcp internal ELS (only test link ADISC)
+ * @status: used to pass error status to calling function
+ */
+struct zfcp_fsf_ct_els {
+ struct scatterlist *req;
+ struct scatterlist *resp;
+ void (*handler)(void *);
+ void *handler_data;
+ struct zfcp_port *port;
+ int status;
+};
+
#endif /* FSF_H */
diff --git a/drivers/s390/scsi/zfcp_scsi.c b/drivers/s390/scsi/zfcp_scsi.c
index 0e1a346..771cc53 100644
--- a/drivers/s390/scsi/zfcp_scsi.c
+++ b/drivers/s390/scsi/zfcp_scsi.c
@@ -9,29 +9,33 @@
#define KMSG_COMPONENT "zfcp"
#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
+#include <linux/types.h>
+#include <scsi/fc/fc_fcp.h>
#include <asm/atomic.h>
#include "zfcp_ext.h"
#include "zfcp_dbf.h"
+#include "zfcp_fc.h"
static unsigned int default_depth = 32;
module_param_named(queue_depth, default_depth, uint, 0600);
MODULE_PARM_DESC(queue_depth, "Default queue depth for new SCSI devices");
-/* Find start of Sense Information in FCP response unit*/
-char *zfcp_get_fcp_sns_info_ptr(struct fcp_rsp_iu *fcp_rsp_iu)
+static int zfcp_scsi_change_queue_depth(struct scsi_device *sdev, int depth,
+ int reason)
{
- char *fcp_sns_info_ptr;
-
- fcp_sns_info_ptr = (unsigned char *) &fcp_rsp_iu[1];
- if (fcp_rsp_iu->validity.bits.fcp_rsp_len_valid)
- fcp_sns_info_ptr += fcp_rsp_iu->fcp_rsp_len;
-
- return fcp_sns_info_ptr;
-}
-
-static int zfcp_scsi_change_queue_depth(struct scsi_device *sdev, int depth)
-{
- scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), depth);
+ switch (reason) {
+ case SCSI_QDEPTH_DEFAULT:
+ scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), depth);
+ break;
+ case SCSI_QDEPTH_QFULL:
+ scsi_track_queue_full(sdev, depth);
+ break;
+ case SCSI_QDEPTH_RAMP_UP:
+ scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), depth);
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
return sdev->queue_depth;
}
@@ -39,7 +43,7 @@
{
struct zfcp_unit *unit = (struct zfcp_unit *) sdpnt->hostdata;
unit->device = NULL;
- zfcp_unit_put(unit);
+ put_device(&unit->sysfs_device);
}
static int zfcp_scsi_slave_configure(struct scsi_device *sdp)
@@ -99,12 +103,26 @@
}
status = atomic_read(&unit->status);
- if (unlikely((status & ZFCP_STATUS_COMMON_ERP_FAILED) ||
- !(status & ZFCP_STATUS_COMMON_RUNNING))) {
+ if (unlikely(status & ZFCP_STATUS_COMMON_ERP_FAILED) &&
+ !(atomic_read(&unit->port->status) &
+ ZFCP_STATUS_COMMON_ERP_FAILED)) {
+ /* only unit access denied, but port is good
+ * not covered by FC transport, have to fail here */
zfcp_scsi_command_fail(scpnt, DID_ERROR);
return 0;
}
+ if (unlikely(!(status & ZFCP_STATUS_COMMON_UNBLOCKED))) {
+ /* This could be either
+ * open unit pending: this is temporary, will result in
+ * open unit or ERP_FAILED, so retry command
+ * call to rport_delete pending: mimic retry from
+ * fc_remote_port_chkready until rport is BLOCKED
+ */
+ zfcp_scsi_command_fail(scpnt, DID_IMM_RETRY);
+ return 0;
+ }
+
ret = zfcp_fsf_send_fcp_command_task(unit, scpnt);
if (unlikely(ret == -EBUSY))
return SCSI_MLQUEUE_DEVICE_BUSY;
@@ -115,49 +133,44 @@
}
static struct zfcp_unit *zfcp_unit_lookup(struct zfcp_adapter *adapter,
- int channel, unsigned int id,
- unsigned int lun)
+ unsigned int id, u64 lun)
{
+ unsigned long flags;
struct zfcp_port *port;
- struct zfcp_unit *unit;
- int scsi_lun;
+ struct zfcp_unit *unit = NULL;
- list_for_each_entry(port, &adapter->port_list_head, list) {
+ read_lock_irqsave(&adapter->port_list_lock, flags);
+ list_for_each_entry(port, &adapter->port_list, list) {
if (!port->rport || (id != port->rport->scsi_target_id))
continue;
- list_for_each_entry(unit, &port->unit_list_head, list) {
- scsi_lun = scsilun_to_int(
- (struct scsi_lun *)&unit->fcp_lun);
- if (lun == scsi_lun)
- return unit;
- }
+ unit = zfcp_get_unit_by_lun(port, lun);
+ if (unit)
+ break;
}
+ read_unlock_irqrestore(&adapter->port_list_lock, flags);
- return NULL;
+ return unit;
}
static int zfcp_scsi_slave_alloc(struct scsi_device *sdp)
{
struct zfcp_adapter *adapter;
struct zfcp_unit *unit;
- unsigned long flags;
- int retval = -ENXIO;
+ u64 lun;
adapter = (struct zfcp_adapter *) sdp->host->hostdata[0];
if (!adapter)
goto out;
- read_lock_irqsave(&zfcp_data.config_lock, flags);
- unit = zfcp_unit_lookup(adapter, sdp->channel, sdp->id, sdp->lun);
+ int_to_scsilun(sdp->lun, (struct scsi_lun *)&lun);
+ unit = zfcp_unit_lookup(adapter, sdp->id, lun);
if (unit) {
sdp->hostdata = unit;
unit->device = sdp;
- zfcp_unit_get(unit);
- retval = 0;
+ return 0;
}
- read_unlock_irqrestore(&zfcp_data.config_lock, flags);
out:
- return retval;
+ return -ENXIO;
}
static int zfcp_scsi_eh_abort_handler(struct scsi_cmnd *scpnt)
@@ -196,6 +209,7 @@
break;
zfcp_erp_wait(adapter);
+ fc_block_scsi_eh(scpnt);
if (!(atomic_read(&adapter->status) &
ZFCP_STATUS_COMMON_RUNNING)) {
zfcp_dbf_scsi_abort("nres", adapter->dbf, scpnt, NULL,
@@ -235,6 +249,7 @@
break;
zfcp_erp_wait(adapter);
+ fc_block_scsi_eh(scpnt);
if (!(atomic_read(&adapter->status) &
ZFCP_STATUS_COMMON_RUNNING)) {
zfcp_dbf_scsi_devreset("nres", tm_flags, unit, scpnt);
@@ -249,9 +264,6 @@
if (fsf_req->status & ZFCP_STATUS_FSFREQ_TMFUNCFAILED) {
zfcp_dbf_scsi_devreset("fail", tm_flags, unit, scpnt);
retval = FAILED;
- } else if (fsf_req->status & ZFCP_STATUS_FSFREQ_TMFUNCNOTSUPP) {
- zfcp_dbf_scsi_devreset("nsup", tm_flags, unit, scpnt);
- retval = FAILED;
} else
zfcp_dbf_scsi_devreset("okay", tm_flags, unit, scpnt);
@@ -261,12 +273,12 @@
static int zfcp_scsi_eh_device_reset_handler(struct scsi_cmnd *scpnt)
{
- return zfcp_task_mgmt_function(scpnt, FCP_LOGICAL_UNIT_RESET);
+ return zfcp_task_mgmt_function(scpnt, FCP_TMF_LUN_RESET);
}
static int zfcp_scsi_eh_target_reset_handler(struct scsi_cmnd *scpnt)
{
- return zfcp_task_mgmt_function(scpnt, FCP_TARGET_RESET);
+ return zfcp_task_mgmt_function(scpnt, FCP_TMF_TGT_RESET);
}
static int zfcp_scsi_eh_host_reset_handler(struct scsi_cmnd *scpnt)
@@ -276,6 +288,7 @@
zfcp_erp_adapter_reopen(adapter, 0, "schrh_1", scpnt);
zfcp_erp_wait(adapter);
+ fc_block_scsi_eh(scpnt);
return SUCCESS;
}
@@ -303,7 +316,7 @@
adapter->scsi_host->max_lun = 1;
adapter->scsi_host->max_channel = 0;
adapter->scsi_host->unique_id = dev_id.devno;
- adapter->scsi_host->max_cmd_len = 255;
+ adapter->scsi_host->max_cmd_len = 16; /* in struct fcp_cmnd */
adapter->scsi_host->transportt = zfcp_data.scsi_transport_template;
adapter->scsi_host->hostdata[0] = (unsigned long) adapter;
@@ -325,12 +338,11 @@
if (!shost)
return;
- read_lock_irq(&zfcp_data.config_lock);
- list_for_each_entry(port, &adapter->port_list_head, list)
- if (port->rport)
- port->rport = NULL;
+ read_lock_irq(&adapter->port_list_lock);
+ list_for_each_entry(port, &adapter->port_list, list)
+ port->rport = NULL;
+ read_unlock_irq(&adapter->port_list_lock);
- read_unlock_irq(&zfcp_data.config_lock);
fc_remove_host(shost);
scsi_remove_host(shost);
scsi_host_put(shost);
@@ -348,7 +360,7 @@
fc_stats = kmalloc(sizeof(*fc_stats), GFP_KERNEL);
if (!fc_stats)
return NULL;
- adapter->fc_stats = fc_stats; /* freed in adater_dequeue */
+ adapter->fc_stats = fc_stats; /* freed in adapter_release */
}
memset(adapter->fc_stats, 0, sizeof(*adapter->fc_stats));
return adapter->fc_stats;
@@ -464,7 +476,7 @@
adapter->stats_reset = jiffies/HZ;
kfree(adapter->stats_reset_data);
adapter->stats_reset_data = data; /* finally freed in
- adapter_dequeue */
+ adapter_release */
}
}
@@ -495,7 +507,7 @@
* @rport: The FC rport where to teminate I/O
*
* Abort all pending SCSI commands for a port by closing the
- * port. Using a reopen for avoids a conflict with a shutdown
+ * port. Using a reopen avoiding a conflict with a shutdown
* overwriting a reopen.
*/
static void zfcp_scsi_terminate_rport_io(struct fc_rport *rport)
@@ -505,15 +517,11 @@
struct zfcp_adapter *adapter =
(struct zfcp_adapter *)shost->hostdata[0];
- write_lock_irq(&zfcp_data.config_lock);
port = zfcp_get_port_by_wwpn(adapter, rport->port_name);
- if (port)
- zfcp_port_get(port);
- write_unlock_irq(&zfcp_data.config_lock);
if (port) {
zfcp_erp_port_reopen(port, 0, "sctrpi1", NULL);
- zfcp_port_put(port);
+ put_device(&port->sysfs_device);
}
}
@@ -555,31 +563,34 @@
void zfcp_scsi_schedule_rport_register(struct zfcp_port *port)
{
- zfcp_port_get(port);
+ get_device(&port->sysfs_device);
port->rport_task = RPORT_ADD;
if (!queue_work(port->adapter->work_queue, &port->rport_work))
- zfcp_port_put(port);
+ put_device(&port->sysfs_device);
}
void zfcp_scsi_schedule_rport_block(struct zfcp_port *port)
{
- zfcp_port_get(port);
+ get_device(&port->sysfs_device);
port->rport_task = RPORT_DEL;
if (port->rport && queue_work(port->adapter->work_queue,
&port->rport_work))
return;
- zfcp_port_put(port);
+ put_device(&port->sysfs_device);
}
void zfcp_scsi_schedule_rports_block(struct zfcp_adapter *adapter)
{
+ unsigned long flags;
struct zfcp_port *port;
- list_for_each_entry(port, &adapter->port_list_head, list)
+ read_lock_irqsave(&adapter->port_list_lock, flags);
+ list_for_each_entry(port, &adapter->port_list, list)
zfcp_scsi_schedule_rport_block(port);
+ read_unlock_irqrestore(&adapter->port_list_lock, flags);
}
void zfcp_scsi_rport_work(struct work_struct *work)
@@ -597,7 +608,7 @@
}
}
- zfcp_port_put(port);
+ put_device(&port->sysfs_device);
}
@@ -615,21 +626,7 @@
scsilun_to_int((struct scsi_lun *)
&unit->fcp_lun), 0);
- zfcp_unit_put(unit);
-}
-
-static int zfcp_execute_fc_job(struct fc_bsg_job *job)
-{
- switch (job->request->msgcode) {
- case FC_BSG_RPT_ELS:
- case FC_BSG_HST_ELS_NOLOGIN:
- return zfcp_fc_execute_els_fc_job(job);
- case FC_BSG_RPT_CT:
- case FC_BSG_HST_CT:
- return zfcp_fc_execute_ct_fc_job(job);
- default:
- return -EINVAL;
- }
+ put_device(&unit->sysfs_device);
}
struct fc_function_template zfcp_transport_functions = {
@@ -643,6 +640,7 @@
.show_host_port_name = 1,
.show_host_permanent_port_name = 1,
.show_host_supported_classes = 1,
+ .show_host_supported_fc4s = 1,
.show_host_supported_speeds = 1,
.show_host_maxframe_size = 1,
.show_host_serial_number = 1,
@@ -652,13 +650,15 @@
.get_host_port_state = zfcp_get_host_port_state,
.terminate_rport_io = zfcp_scsi_terminate_rport_io,
.show_host_port_state = 1,
- .bsg_request = zfcp_execute_fc_job,
+ .show_host_active_fc4s = 1,
+ .bsg_request = zfcp_fc_exec_bsg_job,
/* no functions registered for following dynamic attributes but
directly set by LLDD */
.show_host_port_type = 1,
.show_host_speed = 1,
.show_host_port_id = 1,
.disable_target_scan = 1,
+ .dd_bsg_size = sizeof(struct zfcp_fsf_ct_els),
};
struct zfcp_data zfcp_data = {
diff --git a/drivers/s390/scsi/zfcp_sysfs.c b/drivers/s390/scsi/zfcp_sysfs.c
index d310008..f539e00 100644
--- a/drivers/s390/scsi/zfcp_sysfs.c
+++ b/drivers/s390/scsi/zfcp_sysfs.c
@@ -3,7 +3,7 @@
*
* sysfs attributes.
*
- * Copyright IBM Corporation 2008
+ * Copyright IBM Corporation 2008, 2009
*/
#define KMSG_COMPONENT "zfcp"
@@ -19,30 +19,44 @@
struct device_attribute *at,\
char *buf) \
{ \
- struct _feat_def *_feat = dev_get_drvdata(dev); \
+ struct _feat_def *_feat = container_of(dev, struct _feat_def, \
+ sysfs_device); \
\
return sprintf(buf, _format, _value); \
} \
static ZFCP_DEV_ATTR(_feat, _name, S_IRUGO, \
zfcp_sysfs_##_feat##_##_name##_show, NULL);
-ZFCP_DEFINE_ATTR(zfcp_adapter, adapter, status, "0x%08x\n",
- atomic_read(&adapter->status));
-ZFCP_DEFINE_ATTR(zfcp_adapter, adapter, peer_wwnn, "0x%016llx\n",
- (unsigned long long) adapter->peer_wwnn);
-ZFCP_DEFINE_ATTR(zfcp_adapter, adapter, peer_wwpn, "0x%016llx\n",
- (unsigned long long) adapter->peer_wwpn);
-ZFCP_DEFINE_ATTR(zfcp_adapter, adapter, peer_d_id, "0x%06x\n",
- adapter->peer_d_id);
-ZFCP_DEFINE_ATTR(zfcp_adapter, adapter, card_version, "0x%04x\n",
- adapter->hydra_version);
-ZFCP_DEFINE_ATTR(zfcp_adapter, adapter, lic_version, "0x%08x\n",
- adapter->fsf_lic_version);
-ZFCP_DEFINE_ATTR(zfcp_adapter, adapter, hardware_version, "0x%08x\n",
- adapter->hardware_version);
-ZFCP_DEFINE_ATTR(zfcp_adapter, adapter, in_recovery, "%d\n",
- (atomic_read(&adapter->status) &
- ZFCP_STATUS_COMMON_ERP_INUSE) != 0);
+#define ZFCP_DEFINE_A_ATTR(_name, _format, _value) \
+static ssize_t zfcp_sysfs_adapter_##_name##_show(struct device *dev, \
+ struct device_attribute *at,\
+ char *buf) \
+{ \
+ struct ccw_device *cdev = to_ccwdev(dev); \
+ struct zfcp_adapter *adapter = zfcp_ccw_adapter_by_cdev(cdev); \
+ int i; \
+ \
+ if (!adapter) \
+ return -ENODEV; \
+ \
+ i = sprintf(buf, _format, _value); \
+ zfcp_ccw_adapter_put(adapter); \
+ return i; \
+} \
+static ZFCP_DEV_ATTR(adapter, _name, S_IRUGO, \
+ zfcp_sysfs_adapter_##_name##_show, NULL);
+
+ZFCP_DEFINE_A_ATTR(status, "0x%08x\n", atomic_read(&adapter->status));
+ZFCP_DEFINE_A_ATTR(peer_wwnn, "0x%016llx\n",
+ (unsigned long long) adapter->peer_wwnn);
+ZFCP_DEFINE_A_ATTR(peer_wwpn, "0x%016llx\n",
+ (unsigned long long) adapter->peer_wwpn);
+ZFCP_DEFINE_A_ATTR(peer_d_id, "0x%06x\n", adapter->peer_d_id);
+ZFCP_DEFINE_A_ATTR(card_version, "0x%04x\n", adapter->hydra_version);
+ZFCP_DEFINE_A_ATTR(lic_version, "0x%08x\n", adapter->fsf_lic_version);
+ZFCP_DEFINE_A_ATTR(hardware_version, "0x%08x\n", adapter->hardware_version);
+ZFCP_DEFINE_A_ATTR(in_recovery, "%d\n", (atomic_read(&adapter->status) &
+ ZFCP_STATUS_COMMON_ERP_INUSE) != 0);
ZFCP_DEFINE_ATTR(zfcp_port, port, status, "0x%08x\n",
atomic_read(&port->status));
@@ -73,7 +87,8 @@
struct device_attribute *attr, \
char *buf) \
{ \
- struct _feat_def *_feat = dev_get_drvdata(dev); \
+ struct _feat_def *_feat = container_of(dev, struct _feat_def, \
+ sysfs_device); \
\
if (atomic_read(&_feat->status) & ZFCP_STATUS_COMMON_ERP_FAILED) \
return sprintf(buf, "1\n"); \
@@ -84,15 +99,13 @@
struct device_attribute *attr,\
const char *buf, size_t count)\
{ \
- struct _feat_def *_feat = dev_get_drvdata(dev); \
+ struct _feat_def *_feat = container_of(dev, struct _feat_def, \
+ sysfs_device); \
unsigned long val; \
int retval = 0; \
\
- mutex_lock(&zfcp_data.config_mutex); \
- if (atomic_read(&_feat->status) & ZFCP_STATUS_COMMON_REMOVE) { \
- retval = -EBUSY; \
- goto out; \
- } \
+ if (!(_feat && get_device(&_feat->sysfs_device))) \
+ return -EBUSY; \
\
if (strict_strtoul(buf, 0, &val) || val != 0) { \
retval = -EINVAL; \
@@ -105,29 +118,82 @@
_reopen_id, NULL); \
zfcp_erp_wait(_adapter); \
out: \
- mutex_unlock(&zfcp_data.config_mutex); \
+ put_device(&_feat->sysfs_device); \
return retval ? retval : (ssize_t) count; \
} \
static ZFCP_DEV_ATTR(_feat, failed, S_IWUSR | S_IRUGO, \
zfcp_sysfs_##_feat##_failed_show, \
zfcp_sysfs_##_feat##_failed_store);
-ZFCP_SYSFS_FAILED(zfcp_adapter, adapter, adapter, "syafai1", "syafai2");
ZFCP_SYSFS_FAILED(zfcp_port, port, port->adapter, "sypfai1", "sypfai2");
ZFCP_SYSFS_FAILED(zfcp_unit, unit, unit->port->adapter, "syufai1", "syufai2");
+static ssize_t zfcp_sysfs_adapter_failed_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct ccw_device *cdev = to_ccwdev(dev);
+ struct zfcp_adapter *adapter = zfcp_ccw_adapter_by_cdev(cdev);
+ int i;
+
+ if (!adapter)
+ return -ENODEV;
+
+ if (atomic_read(&adapter->status) & ZFCP_STATUS_COMMON_ERP_FAILED)
+ i = sprintf(buf, "1\n");
+ else
+ i = sprintf(buf, "0\n");
+
+ zfcp_ccw_adapter_put(adapter);
+ return i;
+}
+
+static ssize_t zfcp_sysfs_adapter_failed_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct ccw_device *cdev = to_ccwdev(dev);
+ struct zfcp_adapter *adapter = zfcp_ccw_adapter_by_cdev(cdev);
+ unsigned long val;
+ int retval = 0;
+
+ if (!adapter)
+ return -ENODEV;
+
+ if (strict_strtoul(buf, 0, &val) || val != 0) {
+ retval = -EINVAL;
+ goto out;
+ }
+
+ zfcp_erp_modify_adapter_status(adapter, "syafai1", NULL,
+ ZFCP_STATUS_COMMON_RUNNING, ZFCP_SET);
+ zfcp_erp_adapter_reopen(adapter, ZFCP_STATUS_COMMON_ERP_FAILED,
+ "syafai2", NULL);
+ zfcp_erp_wait(adapter);
+out:
+ zfcp_ccw_adapter_put(adapter);
+ return retval ? retval : (ssize_t) count;
+}
+static ZFCP_DEV_ATTR(adapter, failed, S_IWUSR | S_IRUGO,
+ zfcp_sysfs_adapter_failed_show,
+ zfcp_sysfs_adapter_failed_store);
+
static ssize_t zfcp_sysfs_port_rescan_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
- struct zfcp_adapter *adapter = dev_get_drvdata(dev);
- int ret;
+ struct ccw_device *cdev = to_ccwdev(dev);
+ struct zfcp_adapter *adapter = zfcp_ccw_adapter_by_cdev(cdev);
- if (atomic_read(&adapter->status) & ZFCP_STATUS_COMMON_REMOVE)
- return -EBUSY;
+ if (!adapter)
+ return -ENODEV;
- ret = zfcp_fc_scan_ports(adapter);
- return ret ? ret : (ssize_t) count;
+ /* sync the user-space- with the kernel-invocation of scan_work */
+ queue_work(adapter->work_queue, &adapter->scan_work);
+ flush_work(&adapter->scan_work);
+ zfcp_ccw_adapter_put(adapter);
+
+ return (ssize_t) count;
}
static ZFCP_DEV_ATTR(adapter, port_rescan, S_IWUSR, NULL,
zfcp_sysfs_port_rescan_store);
@@ -136,44 +202,34 @@
struct device_attribute *attr,
const char *buf, size_t count)
{
- struct zfcp_adapter *adapter = dev_get_drvdata(dev);
+ struct ccw_device *cdev = to_ccwdev(dev);
+ struct zfcp_adapter *adapter = zfcp_ccw_adapter_by_cdev(cdev);
struct zfcp_port *port;
u64 wwpn;
- int retval = 0;
- LIST_HEAD(port_remove_lh);
+ int retval = -EINVAL;
- mutex_lock(&zfcp_data.config_mutex);
- if (atomic_read(&adapter->status) & ZFCP_STATUS_COMMON_REMOVE) {
- retval = -EBUSY;
+ if (!adapter)
+ return -ENODEV;
+
+ if (strict_strtoull(buf, 0, (unsigned long long *) &wwpn))
goto out;
- }
- if (strict_strtoull(buf, 0, (unsigned long long *) &wwpn)) {
- retval = -EINVAL;
- goto out;
- }
-
- write_lock_irq(&zfcp_data.config_lock);
port = zfcp_get_port_by_wwpn(adapter, wwpn);
- if (port && (atomic_read(&port->refcount) == 0)) {
- zfcp_port_get(port);
- atomic_set_mask(ZFCP_STATUS_COMMON_REMOVE, &port->status);
- list_move(&port->list, &port_remove_lh);
- } else
- port = NULL;
- write_unlock_irq(&zfcp_data.config_lock);
-
- if (!port) {
- retval = -ENXIO;
+ if (!port)
goto out;
- }
+ else
+ retval = 0;
+
+ write_lock_irq(&adapter->port_list_lock);
+ list_del(&port->list);
+ write_unlock_irq(&adapter->port_list_lock);
+
+ put_device(&port->sysfs_device);
zfcp_erp_port_shutdown(port, 0, "syprs_1", NULL);
- zfcp_erp_wait(adapter);
- zfcp_port_put(port);
- zfcp_port_dequeue(port);
+ zfcp_device_unregister(&port->sysfs_device, &zfcp_sysfs_port_attrs);
out:
- mutex_unlock(&zfcp_data.config_mutex);
+ zfcp_ccw_adapter_put(adapter);
return retval ? retval : (ssize_t) count;
}
static ZFCP_DEV_ATTR(adapter, port_remove, S_IWUSR, NULL,
@@ -202,16 +258,14 @@
struct device_attribute *attr,
const char *buf, size_t count)
{
- struct zfcp_port *port = dev_get_drvdata(dev);
+ struct zfcp_port *port = container_of(dev, struct zfcp_port,
+ sysfs_device);
struct zfcp_unit *unit;
u64 fcp_lun;
int retval = -EINVAL;
- mutex_lock(&zfcp_data.config_mutex);
- if (atomic_read(&port->status) & ZFCP_STATUS_COMMON_REMOVE) {
- retval = -EBUSY;
- goto out;
- }
+ if (!(port && get_device(&port->sysfs_device)))
+ return -EBUSY;
if (strict_strtoull(buf, 0, (unsigned long long *) &fcp_lun))
goto out;
@@ -219,15 +273,14 @@
unit = zfcp_unit_enqueue(port, fcp_lun);
if (IS_ERR(unit))
goto out;
-
- retval = 0;
+ else
+ retval = 0;
zfcp_erp_unit_reopen(unit, 0, "syuas_1", NULL);
zfcp_erp_wait(unit->port->adapter);
flush_work(&unit->scsi_work);
- zfcp_unit_put(unit);
out:
- mutex_unlock(&zfcp_data.config_mutex);
+ put_device(&port->sysfs_device);
return retval ? retval : (ssize_t) count;
}
static DEVICE_ATTR(unit_add, S_IWUSR, NULL, zfcp_sysfs_unit_add_store);
@@ -236,54 +289,37 @@
struct device_attribute *attr,
const char *buf, size_t count)
{
- struct zfcp_port *port = dev_get_drvdata(dev);
+ struct zfcp_port *port = container_of(dev, struct zfcp_port,
+ sysfs_device);
struct zfcp_unit *unit;
u64 fcp_lun;
- int retval = 0;
- LIST_HEAD(unit_remove_lh);
+ int retval = -EINVAL;
- mutex_lock(&zfcp_data.config_mutex);
- if (atomic_read(&port->status) & ZFCP_STATUS_COMMON_REMOVE) {
- retval = -EBUSY;
+ if (!(port && get_device(&port->sysfs_device)))
+ return -EBUSY;
+
+ if (strict_strtoull(buf, 0, (unsigned long long *) &fcp_lun))
goto out;
- }
- if (strict_strtoull(buf, 0, (unsigned long long *) &fcp_lun)) {
- retval = -EINVAL;
- goto out;
- }
-
- write_lock_irq(&zfcp_data.config_lock);
unit = zfcp_get_unit_by_lun(port, fcp_lun);
- if (unit) {
- write_unlock_irq(&zfcp_data.config_lock);
- /* wait for possible timeout during SCSI probe */
- flush_work(&unit->scsi_work);
- write_lock_irq(&zfcp_data.config_lock);
-
- if (atomic_read(&unit->refcount) == 0) {
- zfcp_unit_get(unit);
- atomic_set_mask(ZFCP_STATUS_COMMON_REMOVE,
- &unit->status);
- list_move(&unit->list, &unit_remove_lh);
- } else {
- unit = NULL;
- }
- }
-
- write_unlock_irq(&zfcp_data.config_lock);
-
- if (!unit) {
- retval = -ENXIO;
+ if (!unit)
goto out;
- }
+ else
+ retval = 0;
+
+ /* wait for possible timeout during SCSI probe */
+ flush_work(&unit->scsi_work);
+
+ write_lock_irq(&port->unit_list_lock);
+ list_del(&unit->list);
+ write_unlock_irq(&port->unit_list_lock);
+
+ put_device(&unit->sysfs_device);
zfcp_erp_unit_shutdown(unit, 0, "syurs_1", NULL);
- zfcp_erp_wait(unit->port->adapter);
- zfcp_unit_put(unit);
- zfcp_unit_dequeue(unit);
+ zfcp_device_unregister(&unit->sysfs_device, &zfcp_sysfs_unit_attrs);
out:
- mutex_unlock(&zfcp_data.config_mutex);
+ put_device(&port->sysfs_device);
return retval ? retval : (ssize_t) count;
}
static DEVICE_ATTR(unit_remove, S_IWUSR, NULL, zfcp_sysfs_unit_remove_store);
diff --git a/drivers/sbus/char/envctrl.c b/drivers/sbus/char/envctrl.c
index 58e583b..aa2b60a 100644
--- a/drivers/sbus/char/envctrl.c
+++ b/drivers/sbus/char/envctrl.c
@@ -92,11 +92,11 @@
#define ENVCTRL_CPUTEMP_MON 1 /* cpu temperature monitor */
#define ENVCTRL_CPUVOLTAGE_MON 2 /* voltage monitor */
#define ENVCTRL_FANSTAT_MON 3 /* fan status monitor */
-#define ENVCTRL_ETHERTEMP_MON 4 /* ethernet temperarture */
+#define ENVCTRL_ETHERTEMP_MON 4 /* ethernet temperature */
/* monitor */
#define ENVCTRL_VOLTAGESTAT_MON 5 /* voltage status monitor */
#define ENVCTRL_MTHRBDTEMP_MON 6 /* motherboard temperature */
-#define ENVCTRL_SCSITEMP_MON 7 /* scsi temperarture */
+#define ENVCTRL_SCSITEMP_MON 7 /* scsi temperature */
#define ENVCTRL_GLOBALADDR_MON 8 /* global address */
/* Child device type.
diff --git a/drivers/scsi/3w-9xxx.c b/drivers/scsi/3w-9xxx.c
index 36c21b1..3bf7592 100644
--- a/drivers/scsi/3w-9xxx.c
+++ b/drivers/scsi/3w-9xxx.c
@@ -186,8 +186,12 @@
} /* End twa_show_stats() */
/* This function will set a devices queue depth */
-static int twa_change_queue_depth(struct scsi_device *sdev, int queue_depth)
+static int twa_change_queue_depth(struct scsi_device *sdev, int queue_depth,
+ int reason)
{
+ if (reason != SCSI_QDEPTH_DEFAULT)
+ return -EOPNOTSUPP;
+
if (queue_depth > TW_Q_LENGTH-2)
queue_depth = TW_Q_LENGTH-2;
scsi_adjust_queue_depth(sdev, MSG_ORDERED_TAG, queue_depth);
@@ -732,7 +736,7 @@
break;
case TW_IOCTL_GET_COMPATIBILITY_INFO:
tw_ioctl->driver_command.status = 0;
- /* Copy compatiblity struct into ioctl data buffer */
+ /* Copy compatibility struct into ioctl data buffer */
tw_compat_info = (TW_Compatibility_Info *)tw_ioctl->data_buffer;
memcpy(tw_compat_info, &tw_dev->tw_compat_info, sizeof(TW_Compatibility_Info));
break;
diff --git a/drivers/scsi/3w-sas.c b/drivers/scsi/3w-sas.c
new file mode 100644
index 0000000..4d314d7
--- /dev/null
+++ b/drivers/scsi/3w-sas.c
@@ -0,0 +1,1924 @@
+/*
+ 3w-sas.c -- LSI 3ware SAS/SATA-RAID Controller device driver for Linux.
+
+ Written By: Adam Radford <linuxraid@lsi.com>
+
+ Copyright (C) 2009 LSI Corporation.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; version 2 of the License.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ NO WARRANTY
+ THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
+ CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
+ LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
+ MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
+ solely responsible for determining the appropriateness of using and
+ distributing the Program and assumes all risks associated with its
+ exercise of rights under this Agreement, including but not limited to
+ the risks and costs of program errors, damage to or loss of data,
+ programs or equipment, and unavailability or interruption of operations.
+
+ DISCLAIMER OF LIABILITY
+ NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+ TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+ USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
+ HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+
+ Controllers supported by this driver:
+
+ LSI 3ware 9750 6Gb/s SAS/SATA-RAID
+
+ Bugs/Comments/Suggestions should be mailed to:
+ linuxraid@lsi.com
+
+ For more information, goto:
+ http://www.lsi.com
+
+ History
+ -------
+ 3.26.02.000 - Initial driver release.
+*/
+
+#include <linux/module.h>
+#include <linux/reboot.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/moduleparam.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <linux/time.h>
+#include <linux/mutex.h>
+#include <linux/smp_lock.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+#include <scsi/scsi.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_tcq.h>
+#include <scsi/scsi_cmnd.h>
+#include "3w-sas.h"
+
+/* Globals */
+#define TW_DRIVER_VERSION "3.26.02.000"
+static TW_Device_Extension *twl_device_extension_list[TW_MAX_SLOT];
+static unsigned int twl_device_extension_count;
+static int twl_major = -1;
+extern struct timezone sys_tz;
+
+/* Module parameters */
+MODULE_AUTHOR ("LSI");
+MODULE_DESCRIPTION ("LSI 3ware SAS/SATA-RAID Linux Driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(TW_DRIVER_VERSION);
+
+static int use_msi;
+module_param(use_msi, int, S_IRUGO);
+MODULE_PARM_DESC(use_msi, "Use Message Signaled Interrupts. Default: 0");
+
+/* Function prototypes */
+static int twl_reset_device_extension(TW_Device_Extension *tw_dev, int ioctl_reset);
+
+/* Functions */
+
+/* This function returns AENs through sysfs */
+static ssize_t twl_sysfs_aen_read(struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *outbuf, loff_t offset, size_t count)
+{
+ struct device *dev = container_of(kobj, struct device, kobj);
+ struct Scsi_Host *shost = class_to_shost(dev);
+ TW_Device_Extension *tw_dev = (TW_Device_Extension *)shost->hostdata;
+ unsigned long flags = 0;
+ ssize_t ret;
+
+ if (!capable(CAP_SYS_ADMIN))
+ return -EACCES;
+
+ spin_lock_irqsave(tw_dev->host->host_lock, flags);
+ ret = memory_read_from_buffer(outbuf, count, &offset, tw_dev->event_queue[0], sizeof(TW_Event) * TW_Q_LENGTH);
+ spin_unlock_irqrestore(tw_dev->host->host_lock, flags);
+
+ return ret;
+} /* End twl_sysfs_aen_read() */
+
+/* aen_read sysfs attribute initializer */
+static struct bin_attribute twl_sysfs_aen_read_attr = {
+ .attr = {
+ .name = "3ware_aen_read",
+ .mode = S_IRUSR,
+ },
+ .size = 0,
+ .read = twl_sysfs_aen_read
+};
+
+/* This function returns driver compatibility info through sysfs */
+static ssize_t twl_sysfs_compat_info(struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *outbuf, loff_t offset, size_t count)
+{
+ struct device *dev = container_of(kobj, struct device, kobj);
+ struct Scsi_Host *shost = class_to_shost(dev);
+ TW_Device_Extension *tw_dev = (TW_Device_Extension *)shost->hostdata;
+ unsigned long flags = 0;
+ ssize_t ret;
+
+ if (!capable(CAP_SYS_ADMIN))
+ return -EACCES;
+
+ spin_lock_irqsave(tw_dev->host->host_lock, flags);
+ ret = memory_read_from_buffer(outbuf, count, &offset, &tw_dev->tw_compat_info, sizeof(TW_Compatibility_Info));
+ spin_unlock_irqrestore(tw_dev->host->host_lock, flags);
+
+ return ret;
+} /* End twl_sysfs_compat_info() */
+
+/* compat_info sysfs attribute initializer */
+static struct bin_attribute twl_sysfs_compat_info_attr = {
+ .attr = {
+ .name = "3ware_compat_info",
+ .mode = S_IRUSR,
+ },
+ .size = 0,
+ .read = twl_sysfs_compat_info
+};
+
+/* Show some statistics about the card */
+static ssize_t twl_show_stats(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct Scsi_Host *host = class_to_shost(dev);
+ TW_Device_Extension *tw_dev = (TW_Device_Extension *)host->hostdata;
+ unsigned long flags = 0;
+ ssize_t len;
+
+ spin_lock_irqsave(tw_dev->host->host_lock, flags);
+ len = snprintf(buf, PAGE_SIZE, "3w-sas Driver version: %s\n"
+ "Current commands posted: %4d\n"
+ "Max commands posted: %4d\n"
+ "Last sgl length: %4d\n"
+ "Max sgl length: %4d\n"
+ "Last sector count: %4d\n"
+ "Max sector count: %4d\n"
+ "SCSI Host Resets: %4d\n"
+ "AEN's: %4d\n",
+ TW_DRIVER_VERSION,
+ tw_dev->posted_request_count,
+ tw_dev->max_posted_request_count,
+ tw_dev->sgl_entries,
+ tw_dev->max_sgl_entries,
+ tw_dev->sector_count,
+ tw_dev->max_sector_count,
+ tw_dev->num_resets,
+ tw_dev->aen_count);
+ spin_unlock_irqrestore(tw_dev->host->host_lock, flags);
+ return len;
+} /* End twl_show_stats() */
+
+/* This function will set a devices queue depth */
+static int twl_change_queue_depth(struct scsi_device *sdev, int queue_depth,
+ int reason)
+{
+ if (reason != SCSI_QDEPTH_DEFAULT)
+ return -EOPNOTSUPP;
+
+ if (queue_depth > TW_Q_LENGTH-2)
+ queue_depth = TW_Q_LENGTH-2;
+ scsi_adjust_queue_depth(sdev, MSG_ORDERED_TAG, queue_depth);
+ return queue_depth;
+} /* End twl_change_queue_depth() */
+
+/* stats sysfs attribute initializer */
+static struct device_attribute twl_host_stats_attr = {
+ .attr = {
+ .name = "3ware_stats",
+ .mode = S_IRUGO,
+ },
+ .show = twl_show_stats
+};
+
+/* Host attributes initializer */
+static struct device_attribute *twl_host_attrs[] = {
+ &twl_host_stats_attr,
+ NULL,
+};
+
+/* This function will look up an AEN severity string */
+static char *twl_aen_severity_lookup(unsigned char severity_code)
+{
+ char *retval = NULL;
+
+ if ((severity_code < (unsigned char) TW_AEN_SEVERITY_ERROR) ||
+ (severity_code > (unsigned char) TW_AEN_SEVERITY_DEBUG))
+ goto out;
+
+ retval = twl_aen_severity_table[severity_code];
+out:
+ return retval;
+} /* End twl_aen_severity_lookup() */
+
+/* This function will queue an event */
+static void twl_aen_queue_event(TW_Device_Extension *tw_dev, TW_Command_Apache_Header *header)
+{
+ u32 local_time;
+ struct timeval time;
+ TW_Event *event;
+ unsigned short aen;
+ char host[16];
+ char *error_str;
+
+ tw_dev->aen_count++;
+
+ /* Fill out event info */
+ event = tw_dev->event_queue[tw_dev->error_index];
+
+ host[0] = '\0';
+ if (tw_dev->host)
+ sprintf(host, " scsi%d:", tw_dev->host->host_no);
+
+ aen = le16_to_cpu(header->status_block.error);
+ memset(event, 0, sizeof(TW_Event));
+
+ event->severity = TW_SEV_OUT(header->status_block.severity__reserved);
+ do_gettimeofday(&time);
+ local_time = (u32)(time.tv_sec - (sys_tz.tz_minuteswest * 60));
+ event->time_stamp_sec = local_time;
+ event->aen_code = aen;
+ event->retrieved = TW_AEN_NOT_RETRIEVED;
+ event->sequence_id = tw_dev->error_sequence_id;
+ tw_dev->error_sequence_id++;
+
+ /* Check for embedded error string */
+ error_str = &(header->err_specific_desc[strlen(header->err_specific_desc)+1]);
+
+ header->err_specific_desc[sizeof(header->err_specific_desc) - 1] = '\0';
+ event->parameter_len = strlen(header->err_specific_desc);
+ memcpy(event->parameter_data, header->err_specific_desc, event->parameter_len + 1 + strlen(error_str));
+ if (event->severity != TW_AEN_SEVERITY_DEBUG)
+ printk(KERN_WARNING "3w-sas:%s AEN: %s (0x%02X:0x%04X): %s:%s.\n",
+ host,
+ twl_aen_severity_lookup(TW_SEV_OUT(header->status_block.severity__reserved)),
+ TW_MESSAGE_SOURCE_CONTROLLER_EVENT, aen, error_str,
+ header->err_specific_desc);
+ else
+ tw_dev->aen_count--;
+
+ tw_dev->error_index = (tw_dev->error_index + 1 ) % TW_Q_LENGTH;
+} /* End twl_aen_queue_event() */
+
+/* This function will attempt to post a command packet to the board */
+static int twl_post_command_packet(TW_Device_Extension *tw_dev, int request_id)
+{
+ dma_addr_t command_que_value;
+
+ command_que_value = tw_dev->command_packet_phys[request_id];
+ command_que_value += TW_COMMAND_OFFSET;
+
+ /* First write upper 4 bytes */
+ writel((u32)((u64)command_que_value >> 32), TWL_HIBQPH_REG_ADDR(tw_dev));
+ /* Then the lower 4 bytes */
+ writel((u32)(command_que_value | TWL_PULL_MODE), TWL_HIBQPL_REG_ADDR(tw_dev));
+
+ tw_dev->state[request_id] = TW_S_POSTED;
+ tw_dev->posted_request_count++;
+ if (tw_dev->posted_request_count > tw_dev->max_posted_request_count)
+ tw_dev->max_posted_request_count = tw_dev->posted_request_count;
+
+ return 0;
+} /* End twl_post_command_packet() */
+
+/* This function will perform a pci-dma mapping for a scatter gather list */
+static int twl_map_scsi_sg_data(TW_Device_Extension *tw_dev, int request_id)
+{
+ int use_sg;
+ struct scsi_cmnd *cmd = tw_dev->srb[request_id];
+
+ use_sg = scsi_dma_map(cmd);
+ if (!use_sg)
+ return 0;
+ else if (use_sg < 0) {
+ TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1, "Failed to map scatter gather list");
+ return 0;
+ }
+
+ cmd->SCp.phase = TW_PHASE_SGLIST;
+ cmd->SCp.have_data_in = use_sg;
+
+ return use_sg;
+} /* End twl_map_scsi_sg_data() */
+
+/* This function hands scsi cdb's to the firmware */
+static int twl_scsiop_execute_scsi(TW_Device_Extension *tw_dev, int request_id, char *cdb, int use_sg, TW_SG_Entry_ISO *sglistarg)
+{
+ TW_Command_Full *full_command_packet;
+ TW_Command_Apache *command_packet;
+ int i, sg_count;
+ struct scsi_cmnd *srb = NULL;
+ struct scatterlist *sglist = NULL, *sg;
+ int retval = 1;
+
+ if (tw_dev->srb[request_id]) {
+ srb = tw_dev->srb[request_id];
+ if (scsi_sglist(srb))
+ sglist = scsi_sglist(srb);
+ }
+
+ /* Initialize command packet */
+ full_command_packet = tw_dev->command_packet_virt[request_id];
+ full_command_packet->header.header_desc.size_header = 128;
+ full_command_packet->header.status_block.error = 0;
+ full_command_packet->header.status_block.severity__reserved = 0;
+
+ command_packet = &full_command_packet->command.newcommand;
+ command_packet->status = 0;
+ command_packet->opcode__reserved = TW_OPRES_IN(0, TW_OP_EXECUTE_SCSI);
+
+ /* We forced 16 byte cdb use earlier */
+ if (!cdb)
+ memcpy(command_packet->cdb, srb->cmnd, TW_MAX_CDB_LEN);
+ else
+ memcpy(command_packet->cdb, cdb, TW_MAX_CDB_LEN);
+
+ if (srb) {
+ command_packet->unit = srb->device->id;
+ command_packet->request_id__lunl =
+ cpu_to_le16(TW_REQ_LUN_IN(srb->device->lun, request_id));
+ } else {
+ command_packet->request_id__lunl =
+ cpu_to_le16(TW_REQ_LUN_IN(0, request_id));
+ command_packet->unit = 0;
+ }
+
+ command_packet->sgl_offset = 16;
+
+ if (!sglistarg) {
+ /* Map sglist from scsi layer to cmd packet */
+ if (scsi_sg_count(srb)) {
+ sg_count = twl_map_scsi_sg_data(tw_dev, request_id);
+ if (sg_count == 0)
+ goto out;
+
+ scsi_for_each_sg(srb, sg, sg_count, i) {
+ command_packet->sg_list[i].address = TW_CPU_TO_SGL(sg_dma_address(sg));
+ command_packet->sg_list[i].length = TW_CPU_TO_SGL(sg_dma_len(sg));
+ }
+ command_packet->sgl_entries__lunh = cpu_to_le16(TW_REQ_LUN_IN((srb->device->lun >> 4), scsi_sg_count(tw_dev->srb[request_id])));
+ }
+ } else {
+ /* Internal cdb post */
+ for (i = 0; i < use_sg; i++) {
+ command_packet->sg_list[i].address = TW_CPU_TO_SGL(sglistarg[i].address);
+ command_packet->sg_list[i].length = TW_CPU_TO_SGL(sglistarg[i].length);
+ }
+ command_packet->sgl_entries__lunh = cpu_to_le16(TW_REQ_LUN_IN(0, use_sg));
+ }
+
+ /* Update some stats */
+ if (srb) {
+ tw_dev->sector_count = scsi_bufflen(srb) / 512;
+ if (tw_dev->sector_count > tw_dev->max_sector_count)
+ tw_dev->max_sector_count = tw_dev->sector_count;
+ tw_dev->sgl_entries = scsi_sg_count(srb);
+ if (tw_dev->sgl_entries > tw_dev->max_sgl_entries)
+ tw_dev->max_sgl_entries = tw_dev->sgl_entries;
+ }
+
+ /* Now post the command to the board */
+ retval = twl_post_command_packet(tw_dev, request_id);
+
+out:
+ return retval;
+} /* End twl_scsiop_execute_scsi() */
+
+/* This function will read the aen queue from the isr */
+static int twl_aen_read_queue(TW_Device_Extension *tw_dev, int request_id)
+{
+ char cdb[TW_MAX_CDB_LEN];
+ TW_SG_Entry_ISO sglist[1];
+ TW_Command_Full *full_command_packet;
+ int retval = 1;
+
+ full_command_packet = tw_dev->command_packet_virt[request_id];
+ memset(full_command_packet, 0, sizeof(TW_Command_Full));
+
+ /* Initialize cdb */
+ memset(&cdb, 0, TW_MAX_CDB_LEN);
+ cdb[0] = REQUEST_SENSE; /* opcode */
+ cdb[4] = TW_ALLOCATION_LENGTH; /* allocation length */
+
+ /* Initialize sglist */
+ memset(&sglist, 0, sizeof(TW_SG_Entry_ISO));
+ sglist[0].length = TW_SECTOR_SIZE;
+ sglist[0].address = tw_dev->generic_buffer_phys[request_id];
+
+ /* Mark internal command */
+ tw_dev->srb[request_id] = NULL;
+
+ /* Now post the command packet */
+ if (twl_scsiop_execute_scsi(tw_dev, request_id, cdb, 1, sglist)) {
+ TW_PRINTK(tw_dev->host, TW_DRIVER, 0x2, "Post failed while reading AEN queue");
+ goto out;
+ }
+ retval = 0;
+out:
+ return retval;
+} /* End twl_aen_read_queue() */
+
+/* This function will sync firmware time with the host time */
+static void twl_aen_sync_time(TW_Device_Extension *tw_dev, int request_id)
+{
+ u32 schedulertime;
+ struct timeval utc;
+ TW_Command_Full *full_command_packet;
+ TW_Command *command_packet;
+ TW_Param_Apache *param;
+ u32 local_time;
+
+ /* Fill out the command packet */
+ full_command_packet = tw_dev->command_packet_virt[request_id];
+ memset(full_command_packet, 0, sizeof(TW_Command_Full));
+ command_packet = &full_command_packet->command.oldcommand;
+ command_packet->opcode__sgloffset = TW_OPSGL_IN(2, TW_OP_SET_PARAM);
+ command_packet->request_id = request_id;
+ command_packet->byte8_offset.param.sgl[0].address = TW_CPU_TO_SGL(tw_dev->generic_buffer_phys[request_id]);
+ command_packet->byte8_offset.param.sgl[0].length = TW_CPU_TO_SGL(TW_SECTOR_SIZE);
+ command_packet->size = TW_COMMAND_SIZE;
+ command_packet->byte6_offset.parameter_count = cpu_to_le16(1);
+
+ /* Setup the param */
+ param = (TW_Param_Apache *)tw_dev->generic_buffer_virt[request_id];
+ memset(param, 0, TW_SECTOR_SIZE);
+ param->table_id = cpu_to_le16(TW_TIMEKEEP_TABLE | 0x8000); /* Controller time keep table */
+ param->parameter_id = cpu_to_le16(0x3); /* SchedulerTime */
+ param->parameter_size_bytes = cpu_to_le16(4);
+
+ /* Convert system time in UTC to local time seconds since last
+ Sunday 12:00AM */
+ do_gettimeofday(&utc);
+ local_time = (u32)(utc.tv_sec - (sys_tz.tz_minuteswest * 60));
+ schedulertime = local_time - (3 * 86400);
+ schedulertime = cpu_to_le32(schedulertime % 604800);
+
+ memcpy(param->data, &schedulertime, sizeof(u32));
+
+ /* Mark internal command */
+ tw_dev->srb[request_id] = NULL;
+
+ /* Now post the command */
+ twl_post_command_packet(tw_dev, request_id);
+} /* End twl_aen_sync_time() */
+
+/* This function will assign an available request id */
+static void twl_get_request_id(TW_Device_Extension *tw_dev, int *request_id)
+{
+ *request_id = tw_dev->free_queue[tw_dev->free_head];
+ tw_dev->free_head = (tw_dev->free_head + 1) % TW_Q_LENGTH;
+ tw_dev->state[*request_id] = TW_S_STARTED;
+} /* End twl_get_request_id() */
+
+/* This function will free a request id */
+static void twl_free_request_id(TW_Device_Extension *tw_dev, int request_id)
+{
+ tw_dev->free_queue[tw_dev->free_tail] = request_id;
+ tw_dev->state[request_id] = TW_S_FINISHED;
+ tw_dev->free_tail = (tw_dev->free_tail + 1) % TW_Q_LENGTH;
+} /* End twl_free_request_id() */
+
+/* This function will complete an aen request from the isr */
+static int twl_aen_complete(TW_Device_Extension *tw_dev, int request_id)
+{
+ TW_Command_Full *full_command_packet;
+ TW_Command *command_packet;
+ TW_Command_Apache_Header *header;
+ unsigned short aen;
+ int retval = 1;
+
+ header = (TW_Command_Apache_Header *)tw_dev->generic_buffer_virt[request_id];
+ tw_dev->posted_request_count--;
+ aen = le16_to_cpu(header->status_block.error);
+ full_command_packet = tw_dev->command_packet_virt[request_id];
+ command_packet = &full_command_packet->command.oldcommand;
+
+ /* First check for internal completion of set param for time sync */
+ if (TW_OP_OUT(command_packet->opcode__sgloffset) == TW_OP_SET_PARAM) {
+ /* Keep reading the queue in case there are more aen's */
+ if (twl_aen_read_queue(tw_dev, request_id))
+ goto out2;
+ else {
+ retval = 0;
+ goto out;
+ }
+ }
+
+ switch (aen) {
+ case TW_AEN_QUEUE_EMPTY:
+ /* Quit reading the queue if this is the last one */
+ break;
+ case TW_AEN_SYNC_TIME_WITH_HOST:
+ twl_aen_sync_time(tw_dev, request_id);
+ retval = 0;
+ goto out;
+ default:
+ twl_aen_queue_event(tw_dev, header);
+
+ /* If there are more aen's, keep reading the queue */
+ if (twl_aen_read_queue(tw_dev, request_id))
+ goto out2;
+ else {
+ retval = 0;
+ goto out;
+ }
+ }
+ retval = 0;
+out2:
+ tw_dev->state[request_id] = TW_S_COMPLETED;
+ twl_free_request_id(tw_dev, request_id);
+ clear_bit(TW_IN_ATTENTION_LOOP, &tw_dev->flags);
+out:
+ return retval;
+} /* End twl_aen_complete() */
+
+/* This function will poll for a response */
+static int twl_poll_response(TW_Device_Extension *tw_dev, int request_id, int seconds)
+{
+ unsigned long before;
+ dma_addr_t mfa;
+ u32 regh, regl;
+ u32 response;
+ int retval = 1;
+ int found = 0;
+
+ before = jiffies;
+
+ while (!found) {
+ if (sizeof(dma_addr_t) > 4) {
+ regh = readl(TWL_HOBQPH_REG_ADDR(tw_dev));
+ regl = readl(TWL_HOBQPL_REG_ADDR(tw_dev));
+ mfa = ((u64)regh << 32) | regl;
+ } else
+ mfa = readl(TWL_HOBQPL_REG_ADDR(tw_dev));
+
+ response = (u32)mfa;
+
+ if (TW_RESID_OUT(response) == request_id)
+ found = 1;
+
+ if (time_after(jiffies, before + HZ * seconds))
+ goto out;
+
+ msleep(50);
+ }
+ retval = 0;
+out:
+ return retval;
+} /* End twl_poll_response() */
+
+/* This function will drain the aen queue */
+static int twl_aen_drain_queue(TW_Device_Extension *tw_dev, int no_check_reset)
+{
+ int request_id = 0;
+ char cdb[TW_MAX_CDB_LEN];
+ TW_SG_Entry_ISO sglist[1];
+ int finished = 0, count = 0;
+ TW_Command_Full *full_command_packet;
+ TW_Command_Apache_Header *header;
+ unsigned short aen;
+ int first_reset = 0, queue = 0, retval = 1;
+
+ if (no_check_reset)
+ first_reset = 0;
+ else
+ first_reset = 1;
+
+ full_command_packet = tw_dev->command_packet_virt[request_id];
+ memset(full_command_packet, 0, sizeof(TW_Command_Full));
+
+ /* Initialize cdb */
+ memset(&cdb, 0, TW_MAX_CDB_LEN);
+ cdb[0] = REQUEST_SENSE; /* opcode */
+ cdb[4] = TW_ALLOCATION_LENGTH; /* allocation length */
+
+ /* Initialize sglist */
+ memset(&sglist, 0, sizeof(TW_SG_Entry_ISO));
+ sglist[0].length = TW_SECTOR_SIZE;
+ sglist[0].address = tw_dev->generic_buffer_phys[request_id];
+
+ /* Mark internal command */
+ tw_dev->srb[request_id] = NULL;
+
+ do {
+ /* Send command to the board */
+ if (twl_scsiop_execute_scsi(tw_dev, request_id, cdb, 1, sglist)) {
+ TW_PRINTK(tw_dev->host, TW_DRIVER, 0x3, "Error posting request sense");
+ goto out;
+ }
+
+ /* Now poll for completion */
+ if (twl_poll_response(tw_dev, request_id, 30)) {
+ TW_PRINTK(tw_dev->host, TW_DRIVER, 0x4, "No valid response while draining AEN queue");
+ tw_dev->posted_request_count--;
+ goto out;
+ }
+
+ tw_dev->posted_request_count--;
+ header = (TW_Command_Apache_Header *)tw_dev->generic_buffer_virt[request_id];
+ aen = le16_to_cpu(header->status_block.error);
+ queue = 0;
+ count++;
+
+ switch (aen) {
+ case TW_AEN_QUEUE_EMPTY:
+ if (first_reset != 1)
+ goto out;
+ else
+ finished = 1;
+ break;
+ case TW_AEN_SOFT_RESET:
+ if (first_reset == 0)
+ first_reset = 1;
+ else
+ queue = 1;
+ break;
+ case TW_AEN_SYNC_TIME_WITH_HOST:
+ break;
+ default:
+ queue = 1;
+ }
+
+ /* Now queue an event info */
+ if (queue)
+ twl_aen_queue_event(tw_dev, header);
+ } while ((finished == 0) && (count < TW_MAX_AEN_DRAIN));
+
+ if (count == TW_MAX_AEN_DRAIN)
+ goto out;
+
+ retval = 0;
+out:
+ tw_dev->state[request_id] = TW_S_INITIAL;
+ return retval;
+} /* End twl_aen_drain_queue() */
+
+/* This function will allocate memory and check if it is correctly aligned */
+static int twl_allocate_memory(TW_Device_Extension *tw_dev, int size, int which)
+{
+ int i;
+ dma_addr_t dma_handle;
+ unsigned long *cpu_addr;
+ int retval = 1;
+
+ cpu_addr = pci_alloc_consistent(tw_dev->tw_pci_dev, size*TW_Q_LENGTH, &dma_handle);
+ if (!cpu_addr) {
+ TW_PRINTK(tw_dev->host, TW_DRIVER, 0x5, "Memory allocation failed");
+ goto out;
+ }
+
+ memset(cpu_addr, 0, size*TW_Q_LENGTH);
+
+ for (i = 0; i < TW_Q_LENGTH; i++) {
+ switch(which) {
+ case 0:
+ tw_dev->command_packet_phys[i] = dma_handle+(i*size);
+ tw_dev->command_packet_virt[i] = (TW_Command_Full *)((unsigned char *)cpu_addr + (i*size));
+ break;
+ case 1:
+ tw_dev->generic_buffer_phys[i] = dma_handle+(i*size);
+ tw_dev->generic_buffer_virt[i] = (unsigned long *)((unsigned char *)cpu_addr + (i*size));
+ break;
+ case 2:
+ tw_dev->sense_buffer_phys[i] = dma_handle+(i*size);
+ tw_dev->sense_buffer_virt[i] = (TW_Command_Apache_Header *)((unsigned char *)cpu_addr + (i*size));
+ break;
+ }
+ }
+ retval = 0;
+out:
+ return retval;
+} /* End twl_allocate_memory() */
+
+/* This function will load the request id and various sgls for ioctls */
+static void twl_load_sgl(TW_Device_Extension *tw_dev, TW_Command_Full *full_command_packet, int request_id, dma_addr_t dma_handle, int length)
+{
+ TW_Command *oldcommand;
+ TW_Command_Apache *newcommand;
+ TW_SG_Entry_ISO *sgl;
+ unsigned int pae = 0;
+
+ if ((sizeof(long) < 8) && (sizeof(dma_addr_t) > 4))
+ pae = 1;
+
+ if (TW_OP_OUT(full_command_packet->command.newcommand.opcode__reserved) == TW_OP_EXECUTE_SCSI) {
+ newcommand = &full_command_packet->command.newcommand;
+ newcommand->request_id__lunl =
+ cpu_to_le16(TW_REQ_LUN_IN(TW_LUN_OUT(newcommand->request_id__lunl), request_id));
+ if (length) {
+ newcommand->sg_list[0].address = TW_CPU_TO_SGL(dma_handle + sizeof(TW_Ioctl_Buf_Apache) - 1);
+ newcommand->sg_list[0].length = TW_CPU_TO_SGL(length);
+ }
+ newcommand->sgl_entries__lunh =
+ cpu_to_le16(TW_REQ_LUN_IN(TW_LUN_OUT(newcommand->sgl_entries__lunh), length ? 1 : 0));
+ } else {
+ oldcommand = &full_command_packet->command.oldcommand;
+ oldcommand->request_id = request_id;
+
+ if (TW_SGL_OUT(oldcommand->opcode__sgloffset)) {
+ /* Load the sg list */
+ sgl = (TW_SG_Entry_ISO *)((u32 *)oldcommand+oldcommand->size - (sizeof(TW_SG_Entry_ISO)/4) + pae + (sizeof(dma_addr_t) > 4 ? 1 : 0));
+ sgl->address = TW_CPU_TO_SGL(dma_handle + sizeof(TW_Ioctl_Buf_Apache) - 1);
+ sgl->length = TW_CPU_TO_SGL(length);
+ oldcommand->size += pae;
+ oldcommand->size += sizeof(dma_addr_t) > 4 ? 1 : 0;
+ }
+ }
+} /* End twl_load_sgl() */
+
+/* This function handles ioctl for the character device
+ This interface is used by smartmontools open source software */
+static int twl_chrdev_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
+{
+ long timeout;
+ unsigned long *cpu_addr, data_buffer_length_adjusted = 0, flags = 0;
+ dma_addr_t dma_handle;
+ int request_id = 0;
+ TW_Ioctl_Driver_Command driver_command;
+ TW_Ioctl_Buf_Apache *tw_ioctl;
+ TW_Command_Full *full_command_packet;
+ TW_Device_Extension *tw_dev = twl_device_extension_list[iminor(inode)];
+ int retval = -EFAULT;
+ void __user *argp = (void __user *)arg;
+
+ /* Only let one of these through at a time */
+ if (mutex_lock_interruptible(&tw_dev->ioctl_lock)) {
+ retval = -EINTR;
+ goto out;
+ }
+
+ /* First copy down the driver command */
+ if (copy_from_user(&driver_command, argp, sizeof(TW_Ioctl_Driver_Command)))
+ goto out2;
+
+ /* Check data buffer size */
+ if (driver_command.buffer_length > TW_MAX_SECTORS * 2048) {
+ retval = -EINVAL;
+ goto out2;
+ }
+
+ /* Hardware can only do multiple of 512 byte transfers */
+ data_buffer_length_adjusted = (driver_command.buffer_length + 511) & ~511;
+
+ /* Now allocate ioctl buf memory */
+ cpu_addr = dma_alloc_coherent(&tw_dev->tw_pci_dev->dev, data_buffer_length_adjusted+sizeof(TW_Ioctl_Buf_Apache) - 1, &dma_handle, GFP_KERNEL);
+ if (!cpu_addr) {
+ retval = -ENOMEM;
+ goto out2;
+ }
+
+ tw_ioctl = (TW_Ioctl_Buf_Apache *)cpu_addr;
+
+ /* Now copy down the entire ioctl */
+ if (copy_from_user(tw_ioctl, argp, driver_command.buffer_length + sizeof(TW_Ioctl_Buf_Apache) - 1))
+ goto out3;
+
+ /* See which ioctl we are doing */
+ switch (cmd) {
+ case TW_IOCTL_FIRMWARE_PASS_THROUGH:
+ spin_lock_irqsave(tw_dev->host->host_lock, flags);
+ twl_get_request_id(tw_dev, &request_id);
+
+ /* Flag internal command */
+ tw_dev->srb[request_id] = NULL;
+
+ /* Flag chrdev ioctl */
+ tw_dev->chrdev_request_id = request_id;
+
+ full_command_packet = (TW_Command_Full *)&tw_ioctl->firmware_command;
+
+ /* Load request id and sglist for both command types */
+ twl_load_sgl(tw_dev, full_command_packet, request_id, dma_handle, data_buffer_length_adjusted);
+
+ memcpy(tw_dev->command_packet_virt[request_id], &(tw_ioctl->firmware_command), sizeof(TW_Command_Full));
+
+ /* Now post the command packet to the controller */
+ twl_post_command_packet(tw_dev, request_id);
+ spin_unlock_irqrestore(tw_dev->host->host_lock, flags);
+
+ timeout = TW_IOCTL_CHRDEV_TIMEOUT*HZ;
+
+ /* Now wait for command to complete */
+ timeout = wait_event_timeout(tw_dev->ioctl_wqueue, tw_dev->chrdev_request_id == TW_IOCTL_CHRDEV_FREE, timeout);
+
+ /* We timed out, and didn't get an interrupt */
+ if (tw_dev->chrdev_request_id != TW_IOCTL_CHRDEV_FREE) {
+ /* Now we need to reset the board */
+ printk(KERN_WARNING "3w-sas: scsi%d: WARNING: (0x%02X:0x%04X): Character ioctl (0x%x) timed out, resetting card.\n",
+ tw_dev->host->host_no, TW_DRIVER, 0x6,
+ cmd);
+ retval = -EIO;
+ twl_reset_device_extension(tw_dev, 1);
+ goto out3;
+ }
+
+ /* Now copy in the command packet response */
+ memcpy(&(tw_ioctl->firmware_command), tw_dev->command_packet_virt[request_id], sizeof(TW_Command_Full));
+
+ /* Now complete the io */
+ spin_lock_irqsave(tw_dev->host->host_lock, flags);
+ tw_dev->posted_request_count--;
+ tw_dev->state[request_id] = TW_S_COMPLETED;
+ twl_free_request_id(tw_dev, request_id);
+ spin_unlock_irqrestore(tw_dev->host->host_lock, flags);
+ break;
+ default:
+ retval = -ENOTTY;
+ goto out3;
+ }
+
+ /* Now copy the entire response to userspace */
+ if (copy_to_user(argp, tw_ioctl, sizeof(TW_Ioctl_Buf_Apache) + driver_command.buffer_length - 1) == 0)
+ retval = 0;
+out3:
+ /* Now free ioctl buf memory */
+ dma_free_coherent(&tw_dev->tw_pci_dev->dev, data_buffer_length_adjusted+sizeof(TW_Ioctl_Buf_Apache) - 1, cpu_addr, dma_handle);
+out2:
+ mutex_unlock(&tw_dev->ioctl_lock);
+out:
+ return retval;
+} /* End twl_chrdev_ioctl() */
+
+/* This function handles open for the character device */
+static int twl_chrdev_open(struct inode *inode, struct file *file)
+{
+ unsigned int minor_number;
+ int retval = -ENODEV;
+
+ if (!capable(CAP_SYS_ADMIN)) {
+ retval = -EACCES;
+ goto out;
+ }
+
+ cycle_kernel_lock();
+ minor_number = iminor(inode);
+ if (minor_number >= twl_device_extension_count)
+ goto out;
+ retval = 0;
+out:
+ return retval;
+} /* End twl_chrdev_open() */
+
+/* File operations struct for character device */
+static const struct file_operations twl_fops = {
+ .owner = THIS_MODULE,
+ .ioctl = twl_chrdev_ioctl,
+ .open = twl_chrdev_open,
+ .release = NULL
+};
+
+/* This function passes sense data from firmware to scsi layer */
+static int twl_fill_sense(TW_Device_Extension *tw_dev, int i, int request_id, int copy_sense, int print_host)
+{
+ TW_Command_Apache_Header *header;
+ TW_Command_Full *full_command_packet;
+ unsigned short error;
+ char *error_str;
+ int retval = 1;
+
+ header = tw_dev->sense_buffer_virt[i];
+ full_command_packet = tw_dev->command_packet_virt[request_id];
+
+ /* Get embedded firmware error string */
+ error_str = &(header->err_specific_desc[strlen(header->err_specific_desc) + 1]);
+
+ /* Don't print error for Logical unit not supported during rollcall */
+ error = le16_to_cpu(header->status_block.error);
+ if ((error != TW_ERROR_LOGICAL_UNIT_NOT_SUPPORTED) && (error != TW_ERROR_UNIT_OFFLINE) && (error != TW_ERROR_INVALID_FIELD_IN_CDB)) {
+ if (print_host)
+ printk(KERN_WARNING "3w-sas: scsi%d: ERROR: (0x%02X:0x%04X): %s:%s.\n",
+ tw_dev->host->host_no,
+ TW_MESSAGE_SOURCE_CONTROLLER_ERROR,
+ header->status_block.error,
+ error_str,
+ header->err_specific_desc);
+ else
+ printk(KERN_WARNING "3w-sas: ERROR: (0x%02X:0x%04X): %s:%s.\n",
+ TW_MESSAGE_SOURCE_CONTROLLER_ERROR,
+ header->status_block.error,
+ error_str,
+ header->err_specific_desc);
+ }
+
+ if (copy_sense) {
+ memcpy(tw_dev->srb[request_id]->sense_buffer, header->sense_data, TW_SENSE_DATA_LENGTH);
+ tw_dev->srb[request_id]->result = (full_command_packet->command.newcommand.status << 1);
+ goto out;
+ }
+out:
+ return retval;
+} /* End twl_fill_sense() */
+
+/* This function will free up device extension resources */
+static void twl_free_device_extension(TW_Device_Extension *tw_dev)
+{
+ if (tw_dev->command_packet_virt[0])
+ pci_free_consistent(tw_dev->tw_pci_dev,
+ sizeof(TW_Command_Full)*TW_Q_LENGTH,
+ tw_dev->command_packet_virt[0],
+ tw_dev->command_packet_phys[0]);
+
+ if (tw_dev->generic_buffer_virt[0])
+ pci_free_consistent(tw_dev->tw_pci_dev,
+ TW_SECTOR_SIZE*TW_Q_LENGTH,
+ tw_dev->generic_buffer_virt[0],
+ tw_dev->generic_buffer_phys[0]);
+
+ if (tw_dev->sense_buffer_virt[0])
+ pci_free_consistent(tw_dev->tw_pci_dev,
+ sizeof(TW_Command_Apache_Header)*
+ TW_Q_LENGTH,
+ tw_dev->sense_buffer_virt[0],
+ tw_dev->sense_buffer_phys[0]);
+
+ kfree(tw_dev->event_queue[0]);
+} /* End twl_free_device_extension() */
+
+/* This function will get parameter table entries from the firmware */
+static void *twl_get_param(TW_Device_Extension *tw_dev, int request_id, int table_id, int parameter_id, int parameter_size_bytes)
+{
+ TW_Command_Full *full_command_packet;
+ TW_Command *command_packet;
+ TW_Param_Apache *param;
+ void *retval = NULL;
+
+ /* Setup the command packet */
+ full_command_packet = tw_dev->command_packet_virt[request_id];
+ memset(full_command_packet, 0, sizeof(TW_Command_Full));
+ command_packet = &full_command_packet->command.oldcommand;
+
+ command_packet->opcode__sgloffset = TW_OPSGL_IN(2, TW_OP_GET_PARAM);
+ command_packet->size = TW_COMMAND_SIZE;
+ command_packet->request_id = request_id;
+ command_packet->byte6_offset.block_count = cpu_to_le16(1);
+
+ /* Now setup the param */
+ param = (TW_Param_Apache *)tw_dev->generic_buffer_virt[request_id];
+ memset(param, 0, TW_SECTOR_SIZE);
+ param->table_id = cpu_to_le16(table_id | 0x8000);
+ param->parameter_id = cpu_to_le16(parameter_id);
+ param->parameter_size_bytes = cpu_to_le16(parameter_size_bytes);
+
+ command_packet->byte8_offset.param.sgl[0].address = TW_CPU_TO_SGL(tw_dev->generic_buffer_phys[request_id]);
+ command_packet->byte8_offset.param.sgl[0].length = TW_CPU_TO_SGL(TW_SECTOR_SIZE);
+
+ /* Post the command packet to the board */
+ twl_post_command_packet(tw_dev, request_id);
+
+ /* Poll for completion */
+ if (twl_poll_response(tw_dev, request_id, 30))
+ TW_PRINTK(tw_dev->host, TW_DRIVER, 0x7, "No valid response during get param")
+ else
+ retval = (void *)&(param->data[0]);
+
+ tw_dev->posted_request_count--;
+ tw_dev->state[request_id] = TW_S_INITIAL;
+
+ return retval;
+} /* End twl_get_param() */
+
+/* This function will send an initconnection command to controller */
+static int twl_initconnection(TW_Device_Extension *tw_dev, int message_credits,
+ u32 set_features, unsigned short current_fw_srl,
+ unsigned short current_fw_arch_id,
+ unsigned short current_fw_branch,
+ unsigned short current_fw_build,
+ unsigned short *fw_on_ctlr_srl,
+ unsigned short *fw_on_ctlr_arch_id,
+ unsigned short *fw_on_ctlr_branch,
+ unsigned short *fw_on_ctlr_build,
+ u32 *init_connect_result)
+{
+ TW_Command_Full *full_command_packet;
+ TW_Initconnect *tw_initconnect;
+ int request_id = 0, retval = 1;
+
+ /* Initialize InitConnection command packet */
+ full_command_packet = tw_dev->command_packet_virt[request_id];
+ memset(full_command_packet, 0, sizeof(TW_Command_Full));
+ full_command_packet->header.header_desc.size_header = 128;
+
+ tw_initconnect = (TW_Initconnect *)&full_command_packet->command.oldcommand;
+ tw_initconnect->opcode__reserved = TW_OPRES_IN(0, TW_OP_INIT_CONNECTION);
+ tw_initconnect->request_id = request_id;
+ tw_initconnect->message_credits = cpu_to_le16(message_credits);
+ tw_initconnect->features = set_features;
+
+ /* Turn on 64-bit sgl support if we need to */
+ tw_initconnect->features |= sizeof(dma_addr_t) > 4 ? 1 : 0;
+
+ tw_initconnect->features = cpu_to_le32(tw_initconnect->features);
+
+ if (set_features & TW_EXTENDED_INIT_CONNECT) {
+ tw_initconnect->size = TW_INIT_COMMAND_PACKET_SIZE_EXTENDED;
+ tw_initconnect->fw_srl = cpu_to_le16(current_fw_srl);
+ tw_initconnect->fw_arch_id = cpu_to_le16(current_fw_arch_id);
+ tw_initconnect->fw_branch = cpu_to_le16(current_fw_branch);
+ tw_initconnect->fw_build = cpu_to_le16(current_fw_build);
+ } else
+ tw_initconnect->size = TW_INIT_COMMAND_PACKET_SIZE;
+
+ /* Send command packet to the board */
+ twl_post_command_packet(tw_dev, request_id);
+
+ /* Poll for completion */
+ if (twl_poll_response(tw_dev, request_id, 30)) {
+ TW_PRINTK(tw_dev->host, TW_DRIVER, 0x8, "No valid response during init connection");
+ } else {
+ if (set_features & TW_EXTENDED_INIT_CONNECT) {
+ *fw_on_ctlr_srl = le16_to_cpu(tw_initconnect->fw_srl);
+ *fw_on_ctlr_arch_id = le16_to_cpu(tw_initconnect->fw_arch_id);
+ *fw_on_ctlr_branch = le16_to_cpu(tw_initconnect->fw_branch);
+ *fw_on_ctlr_build = le16_to_cpu(tw_initconnect->fw_build);
+ *init_connect_result = le32_to_cpu(tw_initconnect->result);
+ }
+ retval = 0;
+ }
+
+ tw_dev->posted_request_count--;
+ tw_dev->state[request_id] = TW_S_INITIAL;
+
+ return retval;
+} /* End twl_initconnection() */
+
+/* This function will initialize the fields of a device extension */
+static int twl_initialize_device_extension(TW_Device_Extension *tw_dev)
+{
+ int i, retval = 1;
+
+ /* Initialize command packet buffers */
+ if (twl_allocate_memory(tw_dev, sizeof(TW_Command_Full), 0)) {
+ TW_PRINTK(tw_dev->host, TW_DRIVER, 0x9, "Command packet memory allocation failed");
+ goto out;
+ }
+
+ /* Initialize generic buffer */
+ if (twl_allocate_memory(tw_dev, TW_SECTOR_SIZE, 1)) {
+ TW_PRINTK(tw_dev->host, TW_DRIVER, 0xa, "Generic memory allocation failed");
+ goto out;
+ }
+
+ /* Allocate sense buffers */
+ if (twl_allocate_memory(tw_dev, sizeof(TW_Command_Apache_Header), 2)) {
+ TW_PRINTK(tw_dev->host, TW_DRIVER, 0xb, "Sense buffer allocation failed");
+ goto out;
+ }
+
+ /* Allocate event info space */
+ tw_dev->event_queue[0] = kcalloc(TW_Q_LENGTH, sizeof(TW_Event), GFP_KERNEL);
+ if (!tw_dev->event_queue[0]) {
+ TW_PRINTK(tw_dev->host, TW_DRIVER, 0xc, "Event info memory allocation failed");
+ goto out;
+ }
+
+ for (i = 0; i < TW_Q_LENGTH; i++) {
+ tw_dev->event_queue[i] = (TW_Event *)((unsigned char *)tw_dev->event_queue[0] + (i * sizeof(TW_Event)));
+ tw_dev->free_queue[i] = i;
+ tw_dev->state[i] = TW_S_INITIAL;
+ }
+
+ tw_dev->free_head = TW_Q_START;
+ tw_dev->free_tail = TW_Q_START;
+ tw_dev->error_sequence_id = 1;
+ tw_dev->chrdev_request_id = TW_IOCTL_CHRDEV_FREE;
+
+ mutex_init(&tw_dev->ioctl_lock);
+ init_waitqueue_head(&tw_dev->ioctl_wqueue);
+
+ retval = 0;
+out:
+ return retval;
+} /* End twl_initialize_device_extension() */
+
+/* This function will perform a pci-dma unmap */
+static void twl_unmap_scsi_data(TW_Device_Extension *tw_dev, int request_id)
+{
+ struct scsi_cmnd *cmd = tw_dev->srb[request_id];
+
+ if (cmd->SCp.phase == TW_PHASE_SGLIST)
+ scsi_dma_unmap(cmd);
+} /* End twl_unmap_scsi_data() */
+
+/* This function will handle attention interrupts */
+static int twl_handle_attention_interrupt(TW_Device_Extension *tw_dev)
+{
+ int retval = 1;
+ u32 request_id, doorbell;
+
+ /* Read doorbell status */
+ doorbell = readl(TWL_HOBDB_REG_ADDR(tw_dev));
+
+ /* Check for controller errors */
+ if (doorbell & TWL_DOORBELL_CONTROLLER_ERROR) {
+ TW_PRINTK(tw_dev->host, TW_DRIVER, 0xd, "Microcontroller Error: clearing");
+ goto out;
+ }
+
+ /* Check if we need to perform an AEN drain */
+ if (doorbell & TWL_DOORBELL_ATTENTION_INTERRUPT) {
+ if (!(test_and_set_bit(TW_IN_ATTENTION_LOOP, &tw_dev->flags))) {
+ twl_get_request_id(tw_dev, &request_id);
+ if (twl_aen_read_queue(tw_dev, request_id)) {
+ tw_dev->state[request_id] = TW_S_COMPLETED;
+ twl_free_request_id(tw_dev, request_id);
+ clear_bit(TW_IN_ATTENTION_LOOP, &tw_dev->flags);
+ }
+ }
+ }
+
+ retval = 0;
+out:
+ /* Clear doorbell interrupt */
+ TWL_CLEAR_DB_INTERRUPT(tw_dev);
+
+ /* Make sure the clear was flushed by reading it back */
+ readl(TWL_HOBDBC_REG_ADDR(tw_dev));
+
+ return retval;
+} /* End twl_handle_attention_interrupt() */
+
+/* Interrupt service routine */
+static irqreturn_t twl_interrupt(int irq, void *dev_instance)
+{
+ TW_Device_Extension *tw_dev = (TW_Device_Extension *)dev_instance;
+ int i, handled = 0, error = 0;
+ dma_addr_t mfa = 0;
+ u32 reg, regl, regh, response, request_id = 0;
+ struct scsi_cmnd *cmd;
+ TW_Command_Full *full_command_packet;
+
+ spin_lock(tw_dev->host->host_lock);
+
+ /* Read host interrupt status */
+ reg = readl(TWL_HISTAT_REG_ADDR(tw_dev));
+
+ /* Check if this is our interrupt, otherwise bail */
+ if (!(reg & TWL_HISTATUS_VALID_INTERRUPT))
+ goto twl_interrupt_bail;
+
+ handled = 1;
+
+ /* If we are resetting, bail */
+ if (test_bit(TW_IN_RESET, &tw_dev->flags))
+ goto twl_interrupt_bail;
+
+ /* Attention interrupt */
+ if (reg & TWL_HISTATUS_ATTENTION_INTERRUPT) {
+ if (twl_handle_attention_interrupt(tw_dev)) {
+ TWL_MASK_INTERRUPTS(tw_dev);
+ goto twl_interrupt_bail;
+ }
+ }
+
+ /* Response interrupt */
+ while (reg & TWL_HISTATUS_RESPONSE_INTERRUPT) {
+ if (sizeof(dma_addr_t) > 4) {
+ regh = readl(TWL_HOBQPH_REG_ADDR(tw_dev));
+ regl = readl(TWL_HOBQPL_REG_ADDR(tw_dev));
+ mfa = ((u64)regh << 32) | regl;
+ } else
+ mfa = readl(TWL_HOBQPL_REG_ADDR(tw_dev));
+
+ error = 0;
+ response = (u32)mfa;
+
+ /* Check for command packet error */
+ if (!TW_NOTMFA_OUT(response)) {
+ for (i=0;i<TW_Q_LENGTH;i++) {
+ if (tw_dev->sense_buffer_phys[i] == mfa) {
+ request_id = le16_to_cpu(tw_dev->sense_buffer_virt[i]->header_desc.request_id);
+ if (tw_dev->srb[request_id] != NULL)
+ error = twl_fill_sense(tw_dev, i, request_id, 1, 1);
+ else {
+ /* Skip ioctl error prints */
+ if (request_id != tw_dev->chrdev_request_id)
+ error = twl_fill_sense(tw_dev, i, request_id, 0, 1);
+ else
+ memcpy(tw_dev->command_packet_virt[request_id], tw_dev->sense_buffer_virt[i], sizeof(TW_Command_Apache_Header));
+ }
+
+ /* Now re-post the sense buffer */
+ writel((u32)((u64)tw_dev->sense_buffer_phys[i] >> 32), TWL_HOBQPH_REG_ADDR(tw_dev));
+ writel((u32)tw_dev->sense_buffer_phys[i], TWL_HOBQPL_REG_ADDR(tw_dev));
+ break;
+ }
+ }
+ } else
+ request_id = TW_RESID_OUT(response);
+
+ full_command_packet = tw_dev->command_packet_virt[request_id];
+
+ /* Check for correct state */
+ if (tw_dev->state[request_id] != TW_S_POSTED) {
+ if (tw_dev->srb[request_id] != NULL) {
+ TW_PRINTK(tw_dev->host, TW_DRIVER, 0xe, "Received a request id that wasn't posted");
+ TWL_MASK_INTERRUPTS(tw_dev);
+ goto twl_interrupt_bail;
+ }
+ }
+
+ /* Check for internal command completion */
+ if (tw_dev->srb[request_id] == NULL) {
+ if (request_id != tw_dev->chrdev_request_id) {
+ if (twl_aen_complete(tw_dev, request_id))
+ TW_PRINTK(tw_dev->host, TW_DRIVER, 0xf, "Error completing AEN during attention interrupt");
+ } else {
+ tw_dev->chrdev_request_id = TW_IOCTL_CHRDEV_FREE;
+ wake_up(&tw_dev->ioctl_wqueue);
+ }
+ } else {
+ cmd = tw_dev->srb[request_id];
+
+ if (!error)
+ cmd->result = (DID_OK << 16);
+
+ /* Report residual bytes for single sgl */
+ if ((scsi_sg_count(cmd) <= 1) && (full_command_packet->command.newcommand.status == 0)) {
+ if (full_command_packet->command.newcommand.sg_list[0].length < scsi_bufflen(tw_dev->srb[request_id]))
+ scsi_set_resid(cmd, scsi_bufflen(cmd) - full_command_packet->command.newcommand.sg_list[0].length);
+ }
+
+ /* Now complete the io */
+ tw_dev->state[request_id] = TW_S_COMPLETED;
+ twl_free_request_id(tw_dev, request_id);
+ tw_dev->posted_request_count--;
+ tw_dev->srb[request_id]->scsi_done(tw_dev->srb[request_id]);
+ twl_unmap_scsi_data(tw_dev, request_id);
+ }
+
+ /* Check for another response interrupt */
+ reg = readl(TWL_HISTAT_REG_ADDR(tw_dev));
+ }
+
+twl_interrupt_bail:
+ spin_unlock(tw_dev->host->host_lock);
+ return IRQ_RETVAL(handled);
+} /* End twl_interrupt() */
+
+/* This function will poll for a register change */
+static int twl_poll_register(TW_Device_Extension *tw_dev, void *reg, u32 value, u32 result, int seconds)
+{
+ unsigned long before;
+ int retval = 1;
+ u32 reg_value;
+
+ reg_value = readl(reg);
+ before = jiffies;
+
+ while ((reg_value & value) != result) {
+ reg_value = readl(reg);
+ if (time_after(jiffies, before + HZ * seconds))
+ goto out;
+ msleep(50);
+ }
+ retval = 0;
+out:
+ return retval;
+} /* End twl_poll_register() */
+
+/* This function will reset a controller */
+static int twl_reset_sequence(TW_Device_Extension *tw_dev, int soft_reset)
+{
+ int retval = 1;
+ int i = 0;
+ u32 status = 0;
+ unsigned short fw_on_ctlr_srl = 0, fw_on_ctlr_arch_id = 0;
+ unsigned short fw_on_ctlr_branch = 0, fw_on_ctlr_build = 0;
+ u32 init_connect_result = 0;
+ int tries = 0;
+ int do_soft_reset = soft_reset;
+
+ while (tries < TW_MAX_RESET_TRIES) {
+ /* Do a soft reset if one is needed */
+ if (do_soft_reset) {
+ TWL_SOFT_RESET(tw_dev);
+
+ /* Make sure controller is in a good state */
+ if (twl_poll_register(tw_dev, TWL_SCRPD3_REG_ADDR(tw_dev), TWL_CONTROLLER_READY, 0x0, 30)) {
+ TW_PRINTK(tw_dev->host, TW_DRIVER, 0x10, "Controller never went non-ready during reset sequence");
+ tries++;
+ continue;
+ }
+ if (twl_poll_register(tw_dev, TWL_SCRPD3_REG_ADDR(tw_dev), TWL_CONTROLLER_READY, TWL_CONTROLLER_READY, 60)) {
+ TW_PRINTK(tw_dev->host, TW_DRIVER, 0x11, "Controller not ready during reset sequence");
+ tries++;
+ continue;
+ }
+ }
+
+ /* Initconnect */
+ if (twl_initconnection(tw_dev, TW_INIT_MESSAGE_CREDITS,
+ TW_EXTENDED_INIT_CONNECT, TW_CURRENT_DRIVER_SRL,
+ TW_9750_ARCH_ID, TW_CURRENT_DRIVER_BRANCH,
+ TW_CURRENT_DRIVER_BUILD, &fw_on_ctlr_srl,
+ &fw_on_ctlr_arch_id, &fw_on_ctlr_branch,
+ &fw_on_ctlr_build, &init_connect_result)) {
+ TW_PRINTK(tw_dev->host, TW_DRIVER, 0x12, "Initconnection failed while checking SRL");
+ do_soft_reset = 1;
+ tries++;
+ continue;
+ }
+
+ /* Load sense buffers */
+ while (i < TW_Q_LENGTH) {
+ writel((u32)((u64)tw_dev->sense_buffer_phys[i] >> 32), TWL_HOBQPH_REG_ADDR(tw_dev));
+ writel((u32)tw_dev->sense_buffer_phys[i], TWL_HOBQPL_REG_ADDR(tw_dev));
+
+ /* Check status for over-run after each write */
+ status = readl(TWL_STATUS_REG_ADDR(tw_dev));
+ if (!(status & TWL_STATUS_OVERRUN_SUBMIT))
+ i++;
+ }
+
+ /* Now check status */
+ status = readl(TWL_STATUS_REG_ADDR(tw_dev));
+ if (status) {
+ TW_PRINTK(tw_dev->host, TW_DRIVER, 0x13, "Bad controller status after loading sense buffers");
+ do_soft_reset = 1;
+ tries++;
+ continue;
+ }
+
+ /* Drain the AEN queue */
+ if (twl_aen_drain_queue(tw_dev, soft_reset)) {
+ TW_PRINTK(tw_dev->host, TW_DRIVER, 0x14, "AEN drain failed during reset sequence");
+ do_soft_reset = 1;
+ tries++;
+ continue;
+ }
+
+ /* Load rest of compatibility struct */
+ strncpy(tw_dev->tw_compat_info.driver_version, TW_DRIVER_VERSION, strlen(TW_DRIVER_VERSION));
+ tw_dev->tw_compat_info.driver_srl_high = TW_CURRENT_DRIVER_SRL;
+ tw_dev->tw_compat_info.driver_branch_high = TW_CURRENT_DRIVER_BRANCH;
+ tw_dev->tw_compat_info.driver_build_high = TW_CURRENT_DRIVER_BUILD;
+ tw_dev->tw_compat_info.driver_srl_low = TW_BASE_FW_SRL;
+ tw_dev->tw_compat_info.driver_branch_low = TW_BASE_FW_BRANCH;
+ tw_dev->tw_compat_info.driver_build_low = TW_BASE_FW_BUILD;
+ tw_dev->tw_compat_info.fw_on_ctlr_srl = fw_on_ctlr_srl;
+ tw_dev->tw_compat_info.fw_on_ctlr_branch = fw_on_ctlr_branch;
+ tw_dev->tw_compat_info.fw_on_ctlr_build = fw_on_ctlr_build;
+
+ /* If we got here, controller is in a good state */
+ retval = 0;
+ goto out;
+ }
+out:
+ return retval;
+} /* End twl_reset_sequence() */
+
+/* This function will reset a device extension */
+static int twl_reset_device_extension(TW_Device_Extension *tw_dev, int ioctl_reset)
+{
+ int i = 0, retval = 1;
+ unsigned long flags = 0;
+
+ /* Block SCSI requests while we are resetting */
+ if (ioctl_reset)
+ scsi_block_requests(tw_dev->host);
+
+ set_bit(TW_IN_RESET, &tw_dev->flags);
+ TWL_MASK_INTERRUPTS(tw_dev);
+ TWL_CLEAR_DB_INTERRUPT(tw_dev);
+
+ spin_lock_irqsave(tw_dev->host->host_lock, flags);
+
+ /* Abort all requests that are in progress */
+ for (i = 0; i < TW_Q_LENGTH; i++) {
+ if ((tw_dev->state[i] != TW_S_FINISHED) &&
+ (tw_dev->state[i] != TW_S_INITIAL) &&
+ (tw_dev->state[i] != TW_S_COMPLETED)) {
+ if (tw_dev->srb[i]) {
+ tw_dev->srb[i]->result = (DID_RESET << 16);
+ tw_dev->srb[i]->scsi_done(tw_dev->srb[i]);
+ twl_unmap_scsi_data(tw_dev, i);
+ }
+ }
+ }
+
+ /* Reset queues and counts */
+ for (i = 0; i < TW_Q_LENGTH; i++) {
+ tw_dev->free_queue[i] = i;
+ tw_dev->state[i] = TW_S_INITIAL;
+ }
+ tw_dev->free_head = TW_Q_START;
+ tw_dev->free_tail = TW_Q_START;
+ tw_dev->posted_request_count = 0;
+
+ spin_unlock_irqrestore(tw_dev->host->host_lock, flags);
+
+ if (twl_reset_sequence(tw_dev, 1))
+ goto out;
+
+ TWL_UNMASK_INTERRUPTS(tw_dev);
+
+ clear_bit(TW_IN_RESET, &tw_dev->flags);
+ tw_dev->chrdev_request_id = TW_IOCTL_CHRDEV_FREE;
+
+ retval = 0;
+out:
+ if (ioctl_reset)
+ scsi_unblock_requests(tw_dev->host);
+ return retval;
+} /* End twl_reset_device_extension() */
+
+/* This funciton returns unit geometry in cylinders/heads/sectors */
+static int twl_scsi_biosparam(struct scsi_device *sdev, struct block_device *bdev, sector_t capacity, int geom[])
+{
+ int heads, sectors;
+ TW_Device_Extension *tw_dev;
+
+ tw_dev = (TW_Device_Extension *)sdev->host->hostdata;
+
+ if (capacity >= 0x200000) {
+ heads = 255;
+ sectors = 63;
+ } else {
+ heads = 64;
+ sectors = 32;
+ }
+
+ geom[0] = heads;
+ geom[1] = sectors;
+ geom[2] = sector_div(capacity, heads * sectors); /* cylinders */
+
+ return 0;
+} /* End twl_scsi_biosparam() */
+
+/* This is the new scsi eh reset function */
+static int twl_scsi_eh_reset(struct scsi_cmnd *SCpnt)
+{
+ TW_Device_Extension *tw_dev = NULL;
+ int retval = FAILED;
+
+ tw_dev = (TW_Device_Extension *)SCpnt->device->host->hostdata;
+
+ tw_dev->num_resets++;
+
+ sdev_printk(KERN_WARNING, SCpnt->device,
+ "WARNING: (0x%02X:0x%04X): Command (0x%x) timed out, resetting card.\n",
+ TW_DRIVER, 0x2c, SCpnt->cmnd[0]);
+
+ /* Make sure we are not issuing an ioctl or resetting from ioctl */
+ mutex_lock(&tw_dev->ioctl_lock);
+
+ /* Now reset the card and some of the device extension data */
+ if (twl_reset_device_extension(tw_dev, 0)) {
+ TW_PRINTK(tw_dev->host, TW_DRIVER, 0x15, "Controller reset failed during scsi host reset");
+ goto out;
+ }
+
+ retval = SUCCESS;
+out:
+ mutex_unlock(&tw_dev->ioctl_lock);
+ return retval;
+} /* End twl_scsi_eh_reset() */
+
+/* This is the main scsi queue function to handle scsi opcodes */
+static int twl_scsi_queue(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
+{
+ int request_id, retval;
+ TW_Device_Extension *tw_dev = (TW_Device_Extension *)SCpnt->device->host->hostdata;
+
+ /* If we are resetting due to timed out ioctl, report as busy */
+ if (test_bit(TW_IN_RESET, &tw_dev->flags)) {
+ retval = SCSI_MLQUEUE_HOST_BUSY;
+ goto out;
+ }
+
+ /* Save done function into scsi_cmnd struct */
+ SCpnt->scsi_done = done;
+
+ /* Get a free request id */
+ twl_get_request_id(tw_dev, &request_id);
+
+ /* Save the scsi command for use by the ISR */
+ tw_dev->srb[request_id] = SCpnt;
+
+ /* Initialize phase to zero */
+ SCpnt->SCp.phase = TW_PHASE_INITIAL;
+
+ retval = twl_scsiop_execute_scsi(tw_dev, request_id, NULL, 0, NULL);
+ if (retval) {
+ tw_dev->state[request_id] = TW_S_COMPLETED;
+ twl_free_request_id(tw_dev, request_id);
+ SCpnt->result = (DID_ERROR << 16);
+ done(SCpnt);
+ retval = 0;
+ }
+out:
+ return retval;
+} /* End twl_scsi_queue() */
+
+/* This function tells the controller to shut down */
+static void __twl_shutdown(TW_Device_Extension *tw_dev)
+{
+ /* Disable interrupts */
+ TWL_MASK_INTERRUPTS(tw_dev);
+
+ /* Free up the IRQ */
+ free_irq(tw_dev->tw_pci_dev->irq, tw_dev);
+
+ printk(KERN_WARNING "3w-sas: Shutting down host %d.\n", tw_dev->host->host_no);
+
+ /* Tell the card we are shutting down */
+ if (twl_initconnection(tw_dev, 1, 0, 0, 0, 0, 0, NULL, NULL, NULL, NULL, NULL)) {
+ TW_PRINTK(tw_dev->host, TW_DRIVER, 0x16, "Connection shutdown failed");
+ } else {
+ printk(KERN_WARNING "3w-sas: Shutdown complete.\n");
+ }
+
+ /* Clear doorbell interrupt just before exit */
+ TWL_CLEAR_DB_INTERRUPT(tw_dev);
+} /* End __twl_shutdown() */
+
+/* Wrapper for __twl_shutdown */
+static void twl_shutdown(struct pci_dev *pdev)
+{
+ struct Scsi_Host *host = pci_get_drvdata(pdev);
+ TW_Device_Extension *tw_dev;
+
+ if (!host)
+ return;
+
+ tw_dev = (TW_Device_Extension *)host->hostdata;
+
+ if (tw_dev->online)
+ __twl_shutdown(tw_dev);
+} /* End twl_shutdown() */
+
+/* This function configures unit settings when a unit is coming on-line */
+static int twl_slave_configure(struct scsi_device *sdev)
+{
+ /* Force 60 second timeout */
+ blk_queue_rq_timeout(sdev->request_queue, 60 * HZ);
+
+ return 0;
+} /* End twl_slave_configure() */
+
+/* scsi_host_template initializer */
+static struct scsi_host_template driver_template = {
+ .module = THIS_MODULE,
+ .name = "3w-sas",
+ .queuecommand = twl_scsi_queue,
+ .eh_host_reset_handler = twl_scsi_eh_reset,
+ .bios_param = twl_scsi_biosparam,
+ .change_queue_depth = twl_change_queue_depth,
+ .can_queue = TW_Q_LENGTH-2,
+ .slave_configure = twl_slave_configure,
+ .this_id = -1,
+ .sg_tablesize = TW_LIBERATOR_MAX_SGL_LENGTH,
+ .max_sectors = TW_MAX_SECTORS,
+ .cmd_per_lun = TW_MAX_CMDS_PER_LUN,
+ .use_clustering = ENABLE_CLUSTERING,
+ .shost_attrs = twl_host_attrs,
+ .emulated = 1
+};
+
+/* This function will probe and initialize a card */
+static int __devinit twl_probe(struct pci_dev *pdev, const struct pci_device_id *dev_id)
+{
+ struct Scsi_Host *host = NULL;
+ TW_Device_Extension *tw_dev;
+ int retval = -ENODEV;
+ int *ptr_phycount, phycount=0;
+
+ retval = pci_enable_device(pdev);
+ if (retval) {
+ TW_PRINTK(host, TW_DRIVER, 0x17, "Failed to enable pci device");
+ goto out_disable_device;
+ }
+
+ pci_set_master(pdev);
+ pci_try_set_mwi(pdev);
+
+ if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64))
+ || pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64)))
+ if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32))
+ || pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32))) {
+ TW_PRINTK(host, TW_DRIVER, 0x18, "Failed to set dma mask");
+ retval = -ENODEV;
+ goto out_disable_device;
+ }
+
+ host = scsi_host_alloc(&driver_template, sizeof(TW_Device_Extension));
+ if (!host) {
+ TW_PRINTK(host, TW_DRIVER, 0x19, "Failed to allocate memory for device extension");
+ retval = -ENOMEM;
+ goto out_disable_device;
+ }
+ tw_dev = shost_priv(host);
+
+ /* Save values to device extension */
+ tw_dev->host = host;
+ tw_dev->tw_pci_dev = pdev;
+
+ if (twl_initialize_device_extension(tw_dev)) {
+ TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1a, "Failed to initialize device extension");
+ goto out_free_device_extension;
+ }
+
+ /* Request IO regions */
+ retval = pci_request_regions(pdev, "3w-sas");
+ if (retval) {
+ TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1b, "Failed to get mem region");
+ goto out_free_device_extension;
+ }
+
+ /* Save base address, use region 1 */
+ tw_dev->base_addr = pci_iomap(pdev, 1, 0);
+ if (!tw_dev->base_addr) {
+ TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1c, "Failed to ioremap");
+ goto out_release_mem_region;
+ }
+
+ /* Disable interrupts on the card */
+ TWL_MASK_INTERRUPTS(tw_dev);
+
+ /* Initialize the card */
+ if (twl_reset_sequence(tw_dev, 0)) {
+ TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1d, "Controller reset failed during probe");
+ goto out_iounmap;
+ }
+
+ /* Set host specific parameters */
+ host->max_id = TW_MAX_UNITS;
+ host->max_cmd_len = TW_MAX_CDB_LEN;
+ host->max_lun = TW_MAX_LUNS;
+ host->max_channel = 0;
+
+ /* Register the card with the kernel SCSI layer */
+ retval = scsi_add_host(host, &pdev->dev);
+ if (retval) {
+ TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1e, "scsi add host failed");
+ goto out_iounmap;
+ }
+
+ pci_set_drvdata(pdev, host);
+
+ printk(KERN_WARNING "3w-sas: scsi%d: Found an LSI 3ware %s Controller at 0x%llx, IRQ: %d.\n",
+ host->host_no,
+ (char *)twl_get_param(tw_dev, 1, TW_VERSION_TABLE,
+ TW_PARAM_MODEL, TW_PARAM_MODEL_LENGTH),
+ (u64)pci_resource_start(pdev, 1), pdev->irq);
+
+ ptr_phycount = twl_get_param(tw_dev, 2, TW_PARAM_PHY_SUMMARY_TABLE,
+ TW_PARAM_PHYCOUNT, TW_PARAM_PHYCOUNT_LENGTH);
+ if (ptr_phycount)
+ phycount = le32_to_cpu(*(int *)ptr_phycount);
+
+ printk(KERN_WARNING "3w-sas: scsi%d: Firmware %s, BIOS %s, Phys: %d.\n",
+ host->host_no,
+ (char *)twl_get_param(tw_dev, 1, TW_VERSION_TABLE,
+ TW_PARAM_FWVER, TW_PARAM_FWVER_LENGTH),
+ (char *)twl_get_param(tw_dev, 2, TW_VERSION_TABLE,
+ TW_PARAM_BIOSVER, TW_PARAM_BIOSVER_LENGTH),
+ phycount);
+
+ /* Try to enable MSI */
+ if (use_msi && !pci_enable_msi(pdev))
+ set_bit(TW_USING_MSI, &tw_dev->flags);
+
+ /* Now setup the interrupt handler */
+ retval = request_irq(pdev->irq, twl_interrupt, IRQF_SHARED, "3w-sas", tw_dev);
+ if (retval) {
+ TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1f, "Error requesting IRQ");
+ goto out_remove_host;
+ }
+
+ twl_device_extension_list[twl_device_extension_count] = tw_dev;
+ twl_device_extension_count++;
+
+ /* Re-enable interrupts on the card */
+ TWL_UNMASK_INTERRUPTS(tw_dev);
+
+ /* Finally, scan the host */
+ scsi_scan_host(host);
+
+ /* Add sysfs binary files */
+ if (sysfs_create_bin_file(&host->shost_dev.kobj, &twl_sysfs_aen_read_attr))
+ TW_PRINTK(tw_dev->host, TW_DRIVER, 0x20, "Failed to create sysfs binary file: 3ware_aen_read");
+ if (sysfs_create_bin_file(&host->shost_dev.kobj, &twl_sysfs_compat_info_attr))
+ TW_PRINTK(tw_dev->host, TW_DRIVER, 0x21, "Failed to create sysfs binary file: 3ware_compat_info");
+
+ if (twl_major == -1) {
+ if ((twl_major = register_chrdev (0, "twl", &twl_fops)) < 0)
+ TW_PRINTK(host, TW_DRIVER, 0x22, "Failed to register character device");
+ }
+ tw_dev->online = 1;
+ return 0;
+
+out_remove_host:
+ if (test_bit(TW_USING_MSI, &tw_dev->flags))
+ pci_disable_msi(pdev);
+ scsi_remove_host(host);
+out_iounmap:
+ iounmap(tw_dev->base_addr);
+out_release_mem_region:
+ pci_release_regions(pdev);
+out_free_device_extension:
+ twl_free_device_extension(tw_dev);
+ scsi_host_put(host);
+out_disable_device:
+ pci_disable_device(pdev);
+
+ return retval;
+} /* End twl_probe() */
+
+/* This function is called to remove a device */
+static void twl_remove(struct pci_dev *pdev)
+{
+ struct Scsi_Host *host = pci_get_drvdata(pdev);
+ TW_Device_Extension *tw_dev;
+
+ if (!host)
+ return;
+
+ tw_dev = (TW_Device_Extension *)host->hostdata;
+
+ if (!tw_dev->online)
+ return;
+
+ /* Remove sysfs binary files */
+ sysfs_remove_bin_file(&host->shost_dev.kobj, &twl_sysfs_aen_read_attr);
+ sysfs_remove_bin_file(&host->shost_dev.kobj, &twl_sysfs_compat_info_attr);
+
+ scsi_remove_host(tw_dev->host);
+
+ /* Unregister character device */
+ if (twl_major >= 0) {
+ unregister_chrdev(twl_major, "twl");
+ twl_major = -1;
+ }
+
+ /* Shutdown the card */
+ __twl_shutdown(tw_dev);
+
+ /* Disable MSI if enabled */
+ if (test_bit(TW_USING_MSI, &tw_dev->flags))
+ pci_disable_msi(pdev);
+
+ /* Free IO remapping */
+ iounmap(tw_dev->base_addr);
+
+ /* Free up the mem region */
+ pci_release_regions(pdev);
+
+ /* Free up device extension resources */
+ twl_free_device_extension(tw_dev);
+
+ scsi_host_put(tw_dev->host);
+ pci_disable_device(pdev);
+ twl_device_extension_count--;
+} /* End twl_remove() */
+
+#ifdef CONFIG_PM
+/* This function is called on PCI suspend */
+static int twl_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ struct Scsi_Host *host = pci_get_drvdata(pdev);
+ TW_Device_Extension *tw_dev = (TW_Device_Extension *)host->hostdata;
+
+ printk(KERN_WARNING "3w-sas: Suspending host %d.\n", tw_dev->host->host_no);
+ /* Disable interrupts */
+ TWL_MASK_INTERRUPTS(tw_dev);
+
+ free_irq(tw_dev->tw_pci_dev->irq, tw_dev);
+
+ /* Tell the card we are shutting down */
+ if (twl_initconnection(tw_dev, 1, 0, 0, 0, 0, 0, NULL, NULL, NULL, NULL, NULL)) {
+ TW_PRINTK(tw_dev->host, TW_DRIVER, 0x23, "Connection shutdown failed during suspend");
+ } else {
+ printk(KERN_WARNING "3w-sas: Suspend complete.\n");
+ }
+
+ /* Clear doorbell interrupt */
+ TWL_CLEAR_DB_INTERRUPT(tw_dev);
+
+ pci_save_state(pdev);
+ pci_disable_device(pdev);
+ pci_set_power_state(pdev, pci_choose_state(pdev, state));
+
+ return 0;
+} /* End twl_suspend() */
+
+/* This function is called on PCI resume */
+static int twl_resume(struct pci_dev *pdev)
+{
+ int retval = 0;
+ struct Scsi_Host *host = pci_get_drvdata(pdev);
+ TW_Device_Extension *tw_dev = (TW_Device_Extension *)host->hostdata;
+
+ printk(KERN_WARNING "3w-sas: Resuming host %d.\n", tw_dev->host->host_no);
+ pci_set_power_state(pdev, PCI_D0);
+ pci_enable_wake(pdev, PCI_D0, 0);
+ pci_restore_state(pdev);
+
+ retval = pci_enable_device(pdev);
+ if (retval) {
+ TW_PRINTK(tw_dev->host, TW_DRIVER, 0x24, "Enable device failed during resume");
+ return retval;
+ }
+
+ pci_set_master(pdev);
+ pci_try_set_mwi(pdev);
+
+ if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64))
+ || pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64)))
+ if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32))
+ || pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32))) {
+ TW_PRINTK(host, TW_DRIVER, 0x25, "Failed to set dma mask during resume");
+ retval = -ENODEV;
+ goto out_disable_device;
+ }
+
+ /* Initialize the card */
+ if (twl_reset_sequence(tw_dev, 0)) {
+ retval = -ENODEV;
+ goto out_disable_device;
+ }
+
+ /* Now setup the interrupt handler */
+ retval = request_irq(pdev->irq, twl_interrupt, IRQF_SHARED, "3w-sas", tw_dev);
+ if (retval) {
+ TW_PRINTK(tw_dev->host, TW_DRIVER, 0x26, "Error requesting IRQ during resume");
+ retval = -ENODEV;
+ goto out_disable_device;
+ }
+
+ /* Now enable MSI if enabled */
+ if (test_bit(TW_USING_MSI, &tw_dev->flags))
+ pci_enable_msi(pdev);
+
+ /* Re-enable interrupts on the card */
+ TWL_UNMASK_INTERRUPTS(tw_dev);
+
+ printk(KERN_WARNING "3w-sas: Resume complete.\n");
+ return 0;
+
+out_disable_device:
+ scsi_remove_host(host);
+ pci_disable_device(pdev);
+
+ return retval;
+} /* End twl_resume() */
+#endif
+
+/* PCI Devices supported by this driver */
+static struct pci_device_id twl_pci_tbl[] __devinitdata = {
+ { PCI_VDEVICE(3WARE, PCI_DEVICE_ID_3WARE_9750) },
+ { }
+};
+MODULE_DEVICE_TABLE(pci, twl_pci_tbl);
+
+/* pci_driver initializer */
+static struct pci_driver twl_driver = {
+ .name = "3w-sas",
+ .id_table = twl_pci_tbl,
+ .probe = twl_probe,
+ .remove = twl_remove,
+#ifdef CONFIG_PM
+ .suspend = twl_suspend,
+ .resume = twl_resume,
+#endif
+ .shutdown = twl_shutdown
+};
+
+/* This function is called on driver initialization */
+static int __init twl_init(void)
+{
+ printk(KERN_INFO "LSI 3ware SAS/SATA-RAID Controller device driver for Linux v%s.\n", TW_DRIVER_VERSION);
+
+ return pci_register_driver(&twl_driver);
+} /* End twl_init() */
+
+/* This function is called on driver exit */
+static void __exit twl_exit(void)
+{
+ pci_unregister_driver(&twl_driver);
+} /* End twl_exit() */
+
+module_init(twl_init);
+module_exit(twl_exit);
+
diff --git a/drivers/scsi/3w-sas.h b/drivers/scsi/3w-sas.h
new file mode 100644
index 0000000..d474892
--- /dev/null
+++ b/drivers/scsi/3w-sas.h
@@ -0,0 +1,396 @@
+/*
+ 3w-sas.h -- LSI 3ware SAS/SATA-RAID Controller device driver for Linux.
+
+ Written By: Adam Radford <linuxraid@lsi.com>
+
+ Copyright (C) 2009 LSI Corporation.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; version 2 of the License.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ NO WARRANTY
+ THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
+ CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
+ LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
+ MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
+ solely responsible for determining the appropriateness of using and
+ distributing the Program and assumes all risks associated with its
+ exercise of rights under this Agreement, including but not limited to
+ the risks and costs of program errors, damage to or loss of data,
+ programs or equipment, and unavailability or interruption of operations.
+
+ DISCLAIMER OF LIABILITY
+ NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+ TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+ USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
+ HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+
+ Bugs/Comments/Suggestions should be mailed to:
+ linuxraid@lsi.com
+
+ For more information, goto:
+ http://www.lsi.com
+*/
+
+#ifndef _3W_SAS_H
+#define _3W_SAS_H
+
+/* AEN severity table */
+static char *twl_aen_severity_table[] =
+{
+ "None", "ERROR", "WARNING", "INFO", "DEBUG", NULL
+};
+
+/* Liberator register offsets */
+#define TWL_STATUS 0x0 /* Status */
+#define TWL_HIBDB 0x20 /* Inbound doorbell */
+#define TWL_HISTAT 0x30 /* Host interrupt status */
+#define TWL_HIMASK 0x34 /* Host interrupt mask */
+#define TWL_HOBDB 0x9C /* Outbound doorbell */
+#define TWL_HOBDBC 0xA0 /* Outbound doorbell clear */
+#define TWL_SCRPD3 0xBC /* Scratchpad */
+#define TWL_HIBQPL 0xC0 /* Host inbound Q low */
+#define TWL_HIBQPH 0xC4 /* Host inbound Q high */
+#define TWL_HOBQPL 0xC8 /* Host outbound Q low */
+#define TWL_HOBQPH 0xCC /* Host outbound Q high */
+#define TWL_HISTATUS_VALID_INTERRUPT 0xC
+#define TWL_HISTATUS_ATTENTION_INTERRUPT 0x4
+#define TWL_HISTATUS_RESPONSE_INTERRUPT 0x8
+#define TWL_STATUS_OVERRUN_SUBMIT 0x2000
+#define TWL_ISSUE_SOFT_RESET 0x100
+#define TWL_CONTROLLER_READY 0x2000
+#define TWL_DOORBELL_CONTROLLER_ERROR 0x200000
+#define TWL_DOORBELL_ATTENTION_INTERRUPT 0x40000
+#define TWL_PULL_MODE 0x1
+
+/* Command packet opcodes used by the driver */
+#define TW_OP_INIT_CONNECTION 0x1
+#define TW_OP_GET_PARAM 0x12
+#define TW_OP_SET_PARAM 0x13
+#define TW_OP_EXECUTE_SCSI 0x10
+
+/* Asynchronous Event Notification (AEN) codes used by the driver */
+#define TW_AEN_QUEUE_EMPTY 0x0000
+#define TW_AEN_SOFT_RESET 0x0001
+#define TW_AEN_SYNC_TIME_WITH_HOST 0x031
+#define TW_AEN_SEVERITY_ERROR 0x1
+#define TW_AEN_SEVERITY_DEBUG 0x4
+#define TW_AEN_NOT_RETRIEVED 0x1
+
+/* Command state defines */
+#define TW_S_INITIAL 0x1 /* Initial state */
+#define TW_S_STARTED 0x2 /* Id in use */
+#define TW_S_POSTED 0x4 /* Posted to the controller */
+#define TW_S_COMPLETED 0x8 /* Completed by isr */
+#define TW_S_FINISHED 0x10 /* I/O completely done */
+
+/* Compatibility defines */
+#define TW_9750_ARCH_ID 10
+#define TW_CURRENT_DRIVER_SRL 40
+#define TW_CURRENT_DRIVER_BUILD 0
+#define TW_CURRENT_DRIVER_BRANCH 0
+
+/* Phase defines */
+#define TW_PHASE_INITIAL 0
+#define TW_PHASE_SGLIST 2
+
+/* Misc defines */
+#define TW_SECTOR_SIZE 512
+#define TW_MAX_UNITS 32
+#define TW_INIT_MESSAGE_CREDITS 0x100
+#define TW_INIT_COMMAND_PACKET_SIZE 0x3
+#define TW_INIT_COMMAND_PACKET_SIZE_EXTENDED 0x6
+#define TW_EXTENDED_INIT_CONNECT 0x2
+#define TW_BASE_FW_SRL 24
+#define TW_BASE_FW_BRANCH 0
+#define TW_BASE_FW_BUILD 1
+#define TW_Q_LENGTH 256
+#define TW_Q_START 0
+#define TW_MAX_SLOT 32
+#define TW_MAX_RESET_TRIES 2
+#define TW_MAX_CMDS_PER_LUN 254
+#define TW_MAX_AEN_DRAIN 255
+#define TW_IN_RESET 2
+#define TW_USING_MSI 3
+#define TW_IN_ATTENTION_LOOP 4
+#define TW_MAX_SECTORS 256
+#define TW_MAX_CDB_LEN 16
+#define TW_IOCTL_CHRDEV_TIMEOUT 60 /* 60 seconds */
+#define TW_IOCTL_CHRDEV_FREE -1
+#define TW_COMMAND_OFFSET 128 /* 128 bytes */
+#define TW_VERSION_TABLE 0x0402
+#define TW_TIMEKEEP_TABLE 0x040A
+#define TW_INFORMATION_TABLE 0x0403
+#define TW_PARAM_FWVER 3
+#define TW_PARAM_FWVER_LENGTH 16
+#define TW_PARAM_BIOSVER 4
+#define TW_PARAM_BIOSVER_LENGTH 16
+#define TW_PARAM_MODEL 8
+#define TW_PARAM_MODEL_LENGTH 16
+#define TW_PARAM_PHY_SUMMARY_TABLE 1
+#define TW_PARAM_PHYCOUNT 2
+#define TW_PARAM_PHYCOUNT_LENGTH 1
+#define TW_IOCTL_FIRMWARE_PASS_THROUGH 0x108 // Used by smartmontools
+#define TW_ALLOCATION_LENGTH 128
+#define TW_SENSE_DATA_LENGTH 18
+#define TW_ERROR_LOGICAL_UNIT_NOT_SUPPORTED 0x10a
+#define TW_ERROR_INVALID_FIELD_IN_CDB 0x10d
+#define TW_ERROR_UNIT_OFFLINE 0x128
+#define TW_MESSAGE_SOURCE_CONTROLLER_ERROR 3
+#define TW_MESSAGE_SOURCE_CONTROLLER_EVENT 4
+#define TW_DRIVER 6
+#ifndef PCI_DEVICE_ID_3WARE_9750
+#define PCI_DEVICE_ID_3WARE_9750 0x1010
+#endif
+
+/* Bitmask macros to eliminate bitfields */
+
+/* opcode: 5, reserved: 3 */
+#define TW_OPRES_IN(x,y) ((x << 5) | (y & 0x1f))
+#define TW_OP_OUT(x) (x & 0x1f)
+
+/* opcode: 5, sgloffset: 3 */
+#define TW_OPSGL_IN(x,y) ((x << 5) | (y & 0x1f))
+#define TW_SGL_OUT(x) ((x >> 5) & 0x7)
+
+/* severity: 3, reserved: 5 */
+#define TW_SEV_OUT(x) (x & 0x7)
+
+/* not_mfa: 1, reserved: 7, status: 8, request_id: 16 */
+#define TW_RESID_OUT(x) ((x >> 16) & 0xffff)
+#define TW_NOTMFA_OUT(x) (x & 0x1)
+
+/* request_id: 12, lun: 4 */
+#define TW_REQ_LUN_IN(lun, request_id) (((lun << 12) & 0xf000) | (request_id & 0xfff))
+#define TW_LUN_OUT(lun) ((lun >> 12) & 0xf)
+
+/* Register access macros */
+#define TWL_STATUS_REG_ADDR(x) ((unsigned char __iomem *)x->base_addr + TWL_STATUS)
+#define TWL_HOBQPL_REG_ADDR(x) ((unsigned char __iomem *)x->base_addr + TWL_HOBQPL)
+#define TWL_HOBQPH_REG_ADDR(x) ((unsigned char __iomem *)x->base_addr + TWL_HOBQPH)
+#define TWL_HOBDB_REG_ADDR(x) ((unsigned char __iomem *)x->base_addr + TWL_HOBDB)
+#define TWL_HOBDBC_REG_ADDR(x) ((unsigned char __iomem *)x->base_addr + TWL_HOBDBC)
+#define TWL_HIMASK_REG_ADDR(x) ((unsigned char __iomem *)x->base_addr + TWL_HIMASK)
+#define TWL_HISTAT_REG_ADDR(x) ((unsigned char __iomem *)x->base_addr + TWL_HISTAT)
+#define TWL_HIBQPH_REG_ADDR(x) ((unsigned char __iomem *)x->base_addr + TWL_HIBQPH)
+#define TWL_HIBQPL_REG_ADDR(x) ((unsigned char __iomem *)x->base_addr + TWL_HIBQPL)
+#define TWL_HIBDB_REG_ADDR(x) ((unsigned char __iomem *)x->base_addr + TWL_HIBDB)
+#define TWL_SCRPD3_REG_ADDR(x) ((unsigned char __iomem *)x->base_addr + TWL_SCRPD3)
+#define TWL_MASK_INTERRUPTS(x) (writel(~0, TWL_HIMASK_REG_ADDR(tw_dev)))
+#define TWL_UNMASK_INTERRUPTS(x) (writel(~TWL_HISTATUS_VALID_INTERRUPT, TWL_HIMASK_REG_ADDR(tw_dev)))
+#define TWL_CLEAR_DB_INTERRUPT(x) (writel(~0, TWL_HOBDBC_REG_ADDR(tw_dev)))
+#define TWL_SOFT_RESET(x) (writel(TWL_ISSUE_SOFT_RESET, TWL_HIBDB_REG_ADDR(tw_dev)))
+
+/* Macros */
+#define TW_PRINTK(h,a,b,c) { \
+if (h) \
+printk(KERN_WARNING "3w-sas: scsi%d: ERROR: (0x%02X:0x%04X): %s.\n",h->host_no,a,b,c); \
+else \
+printk(KERN_WARNING "3w-sas: ERROR: (0x%02X:0x%04X): %s.\n",a,b,c); \
+}
+#define TW_MAX_LUNS 16
+#define TW_COMMAND_SIZE (sizeof(dma_addr_t) > 4 ? 6 : 4)
+#define TW_LIBERATOR_MAX_SGL_LENGTH (sizeof(dma_addr_t) > 4 ? 46 : 92)
+#define TW_LIBERATOR_MAX_SGL_LENGTH_OLD (sizeof(dma_addr_t) > 4 ? 47 : 94)
+#define TW_PADDING_LENGTH_LIBERATOR 136
+#define TW_PADDING_LENGTH_LIBERATOR_OLD 132
+#define TW_CPU_TO_SGL(x) (sizeof(dma_addr_t) > 4 ? cpu_to_le64(x) : cpu_to_le32(x))
+
+#pragma pack(1)
+
+/* SGL entry */
+typedef struct TAG_TW_SG_Entry_ISO {
+ dma_addr_t address;
+ dma_addr_t length;
+} TW_SG_Entry_ISO;
+
+/* Old Command Packet with ISO SGL */
+typedef struct TW_Command {
+ unsigned char opcode__sgloffset;
+ unsigned char size;
+ unsigned char request_id;
+ unsigned char unit__hostid;
+ /* Second DWORD */
+ unsigned char status;
+ unsigned char flags;
+ union {
+ unsigned short block_count;
+ unsigned short parameter_count;
+ } byte6_offset;
+ union {
+ struct {
+ u32 lba;
+ TW_SG_Entry_ISO sgl[TW_LIBERATOR_MAX_SGL_LENGTH_OLD];
+ unsigned char padding[TW_PADDING_LENGTH_LIBERATOR_OLD];
+ } io;
+ struct {
+ TW_SG_Entry_ISO sgl[TW_LIBERATOR_MAX_SGL_LENGTH_OLD];
+ u32 padding;
+ unsigned char padding2[TW_PADDING_LENGTH_LIBERATOR_OLD];
+ } param;
+ } byte8_offset;
+} TW_Command;
+
+/* New Command Packet with ISO SGL */
+typedef struct TAG_TW_Command_Apache {
+ unsigned char opcode__reserved;
+ unsigned char unit;
+ unsigned short request_id__lunl;
+ unsigned char status;
+ unsigned char sgl_offset;
+ unsigned short sgl_entries__lunh;
+ unsigned char cdb[16];
+ TW_SG_Entry_ISO sg_list[TW_LIBERATOR_MAX_SGL_LENGTH];
+ unsigned char padding[TW_PADDING_LENGTH_LIBERATOR];
+} TW_Command_Apache;
+
+/* New command packet header */
+typedef struct TAG_TW_Command_Apache_Header {
+ unsigned char sense_data[TW_SENSE_DATA_LENGTH];
+ struct {
+ char reserved[4];
+ unsigned short error;
+ unsigned char padding;
+ unsigned char severity__reserved;
+ } status_block;
+ unsigned char err_specific_desc[98];
+ struct {
+ unsigned char size_header;
+ unsigned short request_id;
+ unsigned char size_sense;
+ } header_desc;
+} TW_Command_Apache_Header;
+
+/* This struct is a union of the 2 command packets */
+typedef struct TAG_TW_Command_Full {
+ TW_Command_Apache_Header header;
+ union {
+ TW_Command oldcommand;
+ TW_Command_Apache newcommand;
+ } command;
+} TW_Command_Full;
+
+/* Initconnection structure */
+typedef struct TAG_TW_Initconnect {
+ unsigned char opcode__reserved;
+ unsigned char size;
+ unsigned char request_id;
+ unsigned char res2;
+ unsigned char status;
+ unsigned char flags;
+ unsigned short message_credits;
+ u32 features;
+ unsigned short fw_srl;
+ unsigned short fw_arch_id;
+ unsigned short fw_branch;
+ unsigned short fw_build;
+ u32 result;
+} TW_Initconnect;
+
+/* Event info structure */
+typedef struct TAG_TW_Event
+{
+ unsigned int sequence_id;
+ unsigned int time_stamp_sec;
+ unsigned short aen_code;
+ unsigned char severity;
+ unsigned char retrieved;
+ unsigned char repeat_count;
+ unsigned char parameter_len;
+ unsigned char parameter_data[98];
+} TW_Event;
+
+typedef struct TAG_TW_Ioctl_Driver_Command {
+ unsigned int control_code;
+ unsigned int status;
+ unsigned int unique_id;
+ unsigned int sequence_id;
+ unsigned int os_specific;
+ unsigned int buffer_length;
+} TW_Ioctl_Driver_Command;
+
+typedef struct TAG_TW_Ioctl_Apache {
+ TW_Ioctl_Driver_Command driver_command;
+ char padding[488];
+ TW_Command_Full firmware_command;
+ char data_buffer[1];
+} TW_Ioctl_Buf_Apache;
+
+/* GetParam descriptor */
+typedef struct {
+ unsigned short table_id;
+ unsigned short parameter_id;
+ unsigned short parameter_size_bytes;
+ unsigned short actual_parameter_size_bytes;
+ unsigned char data[1];
+} TW_Param_Apache;
+
+/* Compatibility information structure */
+typedef struct TAG_TW_Compatibility_Info
+{
+ char driver_version[32];
+ unsigned short working_srl;
+ unsigned short working_branch;
+ unsigned short working_build;
+ unsigned short driver_srl_high;
+ unsigned short driver_branch_high;
+ unsigned short driver_build_high;
+ unsigned short driver_srl_low;
+ unsigned short driver_branch_low;
+ unsigned short driver_build_low;
+ unsigned short fw_on_ctlr_srl;
+ unsigned short fw_on_ctlr_branch;
+ unsigned short fw_on_ctlr_build;
+} TW_Compatibility_Info;
+
+#pragma pack()
+
+typedef struct TAG_TW_Device_Extension {
+ void __iomem *base_addr;
+ unsigned long *generic_buffer_virt[TW_Q_LENGTH];
+ dma_addr_t generic_buffer_phys[TW_Q_LENGTH];
+ TW_Command_Full *command_packet_virt[TW_Q_LENGTH];
+ dma_addr_t command_packet_phys[TW_Q_LENGTH];
+ TW_Command_Apache_Header *sense_buffer_virt[TW_Q_LENGTH];
+ dma_addr_t sense_buffer_phys[TW_Q_LENGTH];
+ struct pci_dev *tw_pci_dev;
+ struct scsi_cmnd *srb[TW_Q_LENGTH];
+ unsigned char free_queue[TW_Q_LENGTH];
+ unsigned char free_head;
+ unsigned char free_tail;
+ int state[TW_Q_LENGTH];
+ unsigned int posted_request_count;
+ unsigned int max_posted_request_count;
+ unsigned int max_sgl_entries;
+ unsigned int sgl_entries;
+ unsigned int num_resets;
+ unsigned int sector_count;
+ unsigned int max_sector_count;
+ unsigned int aen_count;
+ struct Scsi_Host *host;
+ long flags;
+ TW_Event *event_queue[TW_Q_LENGTH];
+ unsigned char error_index;
+ unsigned int error_sequence_id;
+ int chrdev_request_id;
+ wait_queue_head_t ioctl_wqueue;
+ struct mutex ioctl_lock;
+ TW_Compatibility_Info tw_compat_info;
+ char online;
+} TW_Device_Extension;
+
+#endif /* _3W_SAS_H */
+
diff --git a/drivers/scsi/3w-xxxx.c b/drivers/scsi/3w-xxxx.c
index faa0fcf..f65a1e9 100644
--- a/drivers/scsi/3w-xxxx.c
+++ b/drivers/scsi/3w-xxxx.c
@@ -8,7 +8,7 @@
Copyright (C) 1999-2009 3ware Inc.
- Kernel compatiblity By: Andre Hedrick <andre@suse.com>
+ Kernel compatibility By: Andre Hedrick <andre@suse.com>
Non-Copyright (C) 2000 Andre Hedrick <andre@suse.com>
Further tiny build fixes and trivial hoovering Alan Cox
@@ -521,8 +521,12 @@
} /* End tw_show_stats() */
/* This function will set a devices queue depth */
-static int tw_change_queue_depth(struct scsi_device *sdev, int queue_depth)
+static int tw_change_queue_depth(struct scsi_device *sdev, int queue_depth,
+ int reason)
{
+ if (reason != SCSI_QDEPTH_DEFAULT)
+ return -EOPNOTSUPP;
+
if (queue_depth > TW_Q_LENGTH-2)
queue_depth = TW_Q_LENGTH-2;
scsi_adjust_queue_depth(sdev, MSG_ORDERED_TAG, queue_depth);
diff --git a/drivers/scsi/53c700.c b/drivers/scsi/53c700.c
index f5a9add..9f4a911 100644
--- a/drivers/scsi/53c700.c
+++ b/drivers/scsi/53c700.c
@@ -175,7 +175,7 @@
STATIC int NCR_700_slave_alloc(struct scsi_device *SDpnt);
STATIC int NCR_700_slave_configure(struct scsi_device *SDpnt);
STATIC void NCR_700_slave_destroy(struct scsi_device *SDpnt);
-static int NCR_700_change_queue_depth(struct scsi_device *SDpnt, int depth);
+static int NCR_700_change_queue_depth(struct scsi_device *SDpnt, int depth, int reason);
static int NCR_700_change_queue_type(struct scsi_device *SDpnt, int depth);
STATIC struct device_attribute *NCR_700_dev_attrs[];
@@ -1491,7 +1491,7 @@
unsigned long flags;
int handled = 0;
- /* Use the host lock to serialise acess to the 53c700
+ /* Use the host lock to serialise access to the 53c700
* hardware. Note: In future, we may need to take the queue
* lock to enter the done routines. When that happens, we
* need to ensure that for this driver, the host lock and the
@@ -2082,8 +2082,11 @@
}
static int
-NCR_700_change_queue_depth(struct scsi_device *SDp, int depth)
+NCR_700_change_queue_depth(struct scsi_device *SDp, int depth, int reason)
{
+ if (reason != SCSI_QDEPTH_DEFAULT)
+ return -EOPNOTSUPP;
+
if (depth > NCR_700_MAX_TAGS)
depth = NCR_700_MAX_TAGS;
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index e11cca4..36900c7 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -399,6 +399,17 @@
Please read the comments at the top of
<file:drivers/scsi/3w-9xxx.c>.
+config SCSI_3W_SAS
+ tristate "3ware 97xx SAS/SATA-RAID support"
+ depends on PCI && SCSI
+ help
+ This driver supports the LSI 3ware 9750 6Gb/s SAS/SATA-RAID cards.
+
+ <http://www.lsi.com>
+
+ Please read the comments at the top of
+ <file:drivers/scsi/3w-sas.c>.
+
config SCSI_7000FASST
tristate "7000FASST SCSI support"
depends on ISA && SCSI && ISA_DMA_API
@@ -621,6 +632,14 @@
substantial, so users of MultiMaster Host Adapters may not
wish to include it.
+config VMWARE_PVSCSI
+ tristate "VMware PVSCSI driver support"
+ depends on PCI && SCSI && X86
+ help
+ This driver supports VMware's para virtualized SCSI HBA.
+ To compile this driver as a module, choose M here: the
+ module will be called vmw_pvscsi.
+
config LIBFC
tristate "LibFC module"
select SCSI_FC_ATTRS
@@ -644,7 +663,7 @@
config FCOE_FNIC
tristate "Cisco FNIC Driver"
depends on PCI && X86
- select LIBFC
+ select LIBFCOE
help
This is support for the Cisco PCI-Express FCoE HBA.
@@ -1818,6 +1837,14 @@
---help---
This driver supports the PMC SIERRA MaxRAID adapters.
+config SCSI_PM8001
+ tristate "PMC-Sierra SPC 8001 SAS/SATA Based Host Adapter driver"
+ depends on PCI && SCSI
+ select SCSI_SAS_LIBSAS
+ help
+ This driver supports PMC-Sierra PCIE SAS/SATA 8x6G SPC 8001 chip
+ based host adapters.
+
config SCSI_SRP
tristate "SCSI RDMA Protocol helper library"
depends on SCSI && PCI
diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile
index 3ad61db..280d3c6 100644
--- a/drivers/scsi/Makefile
+++ b/drivers/scsi/Makefile
@@ -70,6 +70,7 @@
obj-$(CONFIG_SCSI_AACRAID) += aacraid/
obj-$(CONFIG_SCSI_AIC7XXX_OLD) += aic7xxx_old.o
obj-$(CONFIG_SCSI_AIC94XX) += aic94xx/
+obj-$(CONFIG_SCSI_PM8001) += pm8001/
obj-$(CONFIG_SCSI_IPS) += ips.o
obj-$(CONFIG_SCSI_FD_MCS) += fd_mcs.o
obj-$(CONFIG_SCSI_FUTURE_DOMAIN)+= fdomain.o
@@ -113,6 +114,7 @@
obj-$(CONFIG_SCSI_MAC53C94) += mac53c94.o
obj-$(CONFIG_BLK_DEV_3W_XXXX_RAID) += 3w-xxxx.o
obj-$(CONFIG_SCSI_3W_9XXX) += 3w-9xxx.o
+obj-$(CONFIG_SCSI_3W_SAS) += 3w-sas.o
obj-$(CONFIG_SCSI_PPA) += ppa.o
obj-$(CONFIG_SCSI_IMM) += imm.o
obj-$(CONFIG_JAZZ_ESP) += esp_scsi.o jazz_esp.o
@@ -133,6 +135,7 @@
obj-$(CONFIG_SCSI_BNX2_ISCSI) += libiscsi.o bnx2i/
obj-$(CONFIG_BE2ISCSI) += libiscsi.o be2iscsi/
obj-$(CONFIG_SCSI_PMCRAID) += pmcraid.o
+obj-$(CONFIG_VMWARE_PVSCSI) += vmw_pvscsi.o
obj-$(CONFIG_ARM) += arm/
diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h
index cdbdec9..83986ed 100644
--- a/drivers/scsi/aacraid/aacraid.h
+++ b/drivers/scsi/aacraid/aacraid.h
@@ -526,10 +526,10 @@
/*
* The adapter interface specs all queues to be located in the same
- * physically contigous block. The host structure that defines the
+ * physically contiguous block. The host structure that defines the
* commuication queues will assume they are each a separate physically
- * contigous memory region that will support them all being one big
- * contigous block.
+ * contiguous memory region that will support them all being one big
+ * contiguous block.
* There is a command and response queue for each level and direction of
* commuication. These regions are accessed by both the host and adapter.
*/
diff --git a/drivers/scsi/aacraid/comminit.c b/drivers/scsi/aacraid/comminit.c
index d598eba..666d515 100644
--- a/drivers/scsi/aacraid/comminit.c
+++ b/drivers/scsi/aacraid/comminit.c
@@ -226,7 +226,7 @@
spin_lock_init(&dev->fib_lock);
/*
- * Allocate the physically contigous space for the commuication
+ * Allocate the physically contiguous space for the commuication
* queue headers.
*/
diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
index 9b97c3e..e9373a2 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -472,8 +472,12 @@
* total capacity and the queue depth supported by the target device.
*/
-static int aac_change_queue_depth(struct scsi_device *sdev, int depth)
+static int aac_change_queue_depth(struct scsi_device *sdev, int depth,
+ int reason)
{
+ if (reason != SCSI_QDEPTH_DEFAULT)
+ return -EOPNOTSUPP;
+
if (sdev->tagged_supported && (sdev->type == TYPE_DISK) &&
(sdev_channel(sdev) == CONTAINER_CHANNEL)) {
struct scsi_device * dev;
diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c
index b756041..22626ab 100644
--- a/drivers/scsi/advansys.c
+++ b/drivers/scsi/advansys.c
@@ -7969,7 +7969,7 @@
ASC_DBG(1, "before AscInitAsc1000Driver()\n");
status = AscInitAsc1000Driver(asc_dvc);
- /* Refer to ASC_IERR_* defintions for meaning of 'err_code'. */
+ /* Refer to ASC_IERR_* definitions for meaning of 'err_code'. */
if (asc_dvc->err_code) {
scmd_printk(KERN_INFO, scp, "SCSI bus reset error: "
"0x%x\n", asc_dvc->err_code);
diff --git a/drivers/scsi/aic7xxx/aic79xx.seq b/drivers/scsi/aic7xxx/aic79xx.seq
index 58bc175..2fb78e3 100644
--- a/drivers/scsi/aic7xxx/aic79xx.seq
+++ b/drivers/scsi/aic7xxx/aic79xx.seq
@@ -217,7 +217,7 @@
scbdma_tohost_done:
test CCSCBCTL, CCARREN jz fill_qoutfifo_dmadone;
/*
- * An SCB has been succesfully uploaded to the host.
+ * An SCB has been successfully uploaded to the host.
* If the SCB was uploaded for some reason other than
* bad SCSI status (currently only for underruns), we
* queue the SCB for normal completion. Otherwise, we
@@ -1281,7 +1281,7 @@
* Is it a disconnect message? Set a flag in the SCB to remind us
* and await the bus going free. If this is an untagged transaction
* store the SCB id for it in our untagged target table for lookup on
- * a reselction.
+ * a reselection.
*/
mesgin_disconnect:
/*
diff --git a/drivers/scsi/aic7xxx/aic79xx_core.c b/drivers/scsi/aic7xxx/aic79xx_core.c
index 63b521d..4d419c1 100644
--- a/drivers/scsi/aic7xxx/aic79xx_core.c
+++ b/drivers/scsi/aic7xxx/aic79xx_core.c
@@ -2487,7 +2487,7 @@
/*
* Although the driver does not care about the
* 'Selection in Progress' status bit, the busy
- * LED does. SELINGO is only cleared by a sucessfull
+ * LED does. SELINGO is only cleared by a successfull
* selection, so we must manually clear it to insure
* the LED turns off just incase no future successful
* selections occur (e.g. no devices on the bus).
diff --git a/drivers/scsi/aic7xxx/aic79xx_osm.c b/drivers/scsi/aic7xxx/aic79xx_osm.c
index 75b2331..1222a7a 100644
--- a/drivers/scsi/aic7xxx/aic79xx_osm.c
+++ b/drivers/scsi/aic7xxx/aic79xx_osm.c
@@ -2335,7 +2335,7 @@
/*
* The sequencer will never re-reference the
* in-core SCB. To make sure we are notified
- * during reslection, set the MK_MESSAGE flag in
+ * during reselection, set the MK_MESSAGE flag in
* the card's copy of the SCB.
*/
ahd_outb(ahd, SCB_CONTROL,
diff --git a/drivers/scsi/aic7xxx/aic7xxx.seq b/drivers/scsi/aic7xxx/aic7xxx.seq
index 1519639..5a4cfc95 100644
--- a/drivers/scsi/aic7xxx/aic7xxx.seq
+++ b/drivers/scsi/aic7xxx/aic7xxx.seq
@@ -1693,7 +1693,7 @@
* Is it a disconnect message? Set a flag in the SCB to remind us
* and await the bus going free. If this is an untagged transaction
* store the SCB id for it in our untagged target table for lookup on
- * a reselction.
+ * a reselection.
*/
mesgin_disconnect:
/*
diff --git a/drivers/scsi/aic7xxx/aic7xxx_core.c b/drivers/scsi/aic7xxx/aic7xxx_core.c
index 8dfb59d..45aa728 100644
--- a/drivers/scsi/aic7xxx/aic7xxx_core.c
+++ b/drivers/scsi/aic7xxx/aic7xxx_core.c
@@ -1733,7 +1733,7 @@
/*
* Although the driver does not care about the
* 'Selection in Progress' status bit, the busy
- * LED does. SELINGO is only cleared by a sucessfull
+ * LED does. SELINGO is only cleared by a successfull
* selection, so we must manually clear it to insure
* the LED turns off just incase no future successful
* selections occur (e.g. no devices on the bus).
diff --git a/drivers/scsi/aic7xxx/aic7xxx_osm.c b/drivers/scsi/aic7xxx/aic7xxx_osm.c
index fd2b978..8cb05dc 100644
--- a/drivers/scsi/aic7xxx/aic7xxx_osm.c
+++ b/drivers/scsi/aic7xxx/aic7xxx_osm.c
@@ -2290,7 +2290,7 @@
* In the non-paging case, the sequencer will
* never re-reference the in-core SCB.
* To make sure we are notified during
- * reslection, set the MK_MESSAGE flag in
+ * reselection, set the MK_MESSAGE flag in
* the card's copy of the SCB.
*/
if ((ahc->flags & AHC_PAGESCBS) == 0) {
diff --git a/drivers/scsi/aic94xx/aic94xx_reg_def.h b/drivers/scsi/aic94xx/aic94xx_reg_def.h
index a43e8cd..28aaf34 100644
--- a/drivers/scsi/aic94xx/aic94xx_reg_def.h
+++ b/drivers/scsi/aic94xx/aic94xx_reg_def.h
@@ -1,5 +1,5 @@
/*
- * Aic94xx SAS/SATA driver hardware registers defintions.
+ * Aic94xx SAS/SATA driver hardware registers definitions.
*
* Copyright (C) 2004 Adaptec, Inc. All rights reserved.
* Copyright (C) 2004 David Chaw <david_chaw@adaptec.com>
diff --git a/drivers/scsi/arcmsr/arcmsr_hba.c b/drivers/scsi/arcmsr/arcmsr_hba.c
index 80aac01..47d5d19 100644
--- a/drivers/scsi/arcmsr/arcmsr_hba.c
+++ b/drivers/scsi/arcmsr/arcmsr_hba.c
@@ -98,8 +98,11 @@
static const char *arcmsr_info(struct Scsi_Host *);
static irqreturn_t arcmsr_interrupt(struct AdapterControlBlock *acb);
static int arcmsr_adjust_disk_queue_depth(struct scsi_device *sdev,
- int queue_depth)
+ int queue_depth, int reason)
{
+ if (reason != SCSI_QDEPTH_DEFAULT)
+ return -EOPNOTSUPP;
+
if (queue_depth > ARCMSR_MAX_CMD_PERLUN)
queue_depth = ARCMSR_MAX_CMD_PERLUN;
scsi_adjust_queue_depth(sdev, MSG_ORDERED_TAG, queue_depth);
diff --git a/drivers/scsi/be2iscsi/be.h b/drivers/scsi/be2iscsi/be.h
index b36020d..a93a504 100644
--- a/drivers/scsi/be2iscsi/be.h
+++ b/drivers/scsi/be2iscsi/be.h
@@ -20,8 +20,10 @@
#include <linux/pci.h>
#include <linux/if_vlan.h>
-
-#define FW_VER_LEN 32
+#include <linux/blk-iopoll.h>
+#define FW_VER_LEN 32
+#define MCC_Q_LEN 128
+#define MCC_CQ_LEN 256
struct be_dma_mem {
void *va;
@@ -74,18 +76,14 @@
struct be_eq_obj {
struct be_queue_info q;
- char desc[32];
-
- /* Adaptive interrupt coalescing (AIC) info */
- bool enable_aic;
- u16 min_eqd; /* in usecs */
- u16 max_eqd; /* in usecs */
- u16 cur_eqd; /* in usecs */
+ struct beiscsi_hba *phba;
+ struct be_queue_info *cq;
+ struct blk_iopoll iopoll;
};
struct be_mcc_obj {
- struct be_queue_info *q;
- struct be_queue_info *cq;
+ struct be_queue_info q;
+ struct be_queue_info cq;
};
struct be_ctrl_info {
@@ -176,8 +174,4 @@
} while (len);
#endif /* __BIG_ENDIAN */
}
-
-extern void beiscsi_cq_notify(struct be_ctrl_info *ctrl, u16 qid, bool arm,
- u16 num_popped);
-
#endif /* BEISCSI_H */
diff --git a/drivers/scsi/be2iscsi/be_cmds.c b/drivers/scsi/be2iscsi/be_cmds.c
index 08007b6..698a527 100644
--- a/drivers/scsi/be2iscsi/be_cmds.c
+++ b/drivers/scsi/be2iscsi/be_cmds.c
@@ -19,6 +19,16 @@
#include "be_mgmt.h"
#include "be_main.h"
+static void be_mcc_notify(struct beiscsi_hba *phba)
+{
+ struct be_queue_info *mccq = &phba->ctrl.mcc_obj.q;
+ u32 val = 0;
+
+ val |= mccq->id & DB_MCCQ_RING_ID_MASK;
+ val |= 1 << DB_MCCQ_NUM_POSTED_SHIFT;
+ iowrite32(val, phba->db_va + DB_MCCQ_OFFSET);
+}
+
static inline bool be_mcc_compl_is_new(struct be_mcc_compl *compl)
{
if (compl->flags != 0) {
@@ -54,13 +64,56 @@
return 0;
}
+
static inline bool is_link_state_evt(u32 trailer)
{
return (((trailer >> ASYNC_TRAILER_EVENT_CODE_SHIFT) &
- ASYNC_TRAILER_EVENT_CODE_MASK) == ASYNC_EVENT_CODE_LINK_STATE);
+ ASYNC_TRAILER_EVENT_CODE_MASK) ==
+ ASYNC_EVENT_CODE_LINK_STATE);
}
-void beiscsi_cq_notify(struct be_ctrl_info *ctrl, u16 qid, bool arm,
+static struct be_mcc_compl *be_mcc_compl_get(struct beiscsi_hba *phba)
+{
+ struct be_queue_info *mcc_cq = &phba->ctrl.mcc_obj.cq;
+ struct be_mcc_compl *compl = queue_tail_node(mcc_cq);
+
+ if (be_mcc_compl_is_new(compl)) {
+ queue_tail_inc(mcc_cq);
+ return compl;
+ }
+ return NULL;
+}
+
+static void be2iscsi_fail_session(struct iscsi_cls_session *cls_session)
+{
+ iscsi_session_failure(cls_session->dd_data, ISCSI_ERR_CONN_FAILED);
+}
+
+static void beiscsi_async_link_state_process(struct beiscsi_hba *phba,
+ struct be_async_event_link_state *evt)
+{
+ switch (evt->port_link_status) {
+ case ASYNC_EVENT_LINK_DOWN:
+ SE_DEBUG(DBG_LVL_1, "Link Down on Physical Port %d \n",
+ evt->physical_port);
+ phba->state |= BE_ADAPTER_LINK_DOWN;
+ break;
+ case ASYNC_EVENT_LINK_UP:
+ phba->state = BE_ADAPTER_UP;
+ SE_DEBUG(DBG_LVL_1, "Link UP on Physical Port %d \n",
+ evt->physical_port);
+ iscsi_host_for_each_session(phba->shost,
+ be2iscsi_fail_session);
+ break;
+ default:
+ SE_DEBUG(DBG_LVL_1, "Unexpected Async Notification %d on"
+ "Physical Port %d \n",
+ evt->port_link_status,
+ evt->physical_port);
+ }
+}
+
+static void beiscsi_cq_notify(struct beiscsi_hba *phba, u16 qid, bool arm,
u16 num_popped)
{
u32 val = 0;
@@ -68,7 +121,66 @@
if (arm)
val |= 1 << DB_CQ_REARM_SHIFT;
val |= num_popped << DB_CQ_NUM_POPPED_SHIFT;
- iowrite32(val, ctrl->db + DB_CQ_OFFSET);
+ iowrite32(val, phba->db_va + DB_CQ_OFFSET);
+}
+
+
+int beiscsi_process_mcc(struct beiscsi_hba *phba)
+{
+ struct be_mcc_compl *compl;
+ int num = 0, status = 0;
+ struct be_ctrl_info *ctrl = &phba->ctrl;
+
+ spin_lock_bh(&phba->ctrl.mcc_cq_lock);
+ while ((compl = be_mcc_compl_get(phba))) {
+ if (compl->flags & CQE_FLAGS_ASYNC_MASK) {
+ /* Interpret flags as an async trailer */
+ BUG_ON(!is_link_state_evt(compl->flags));
+
+ /* Interpret compl as a async link evt */
+ beiscsi_async_link_state_process(phba,
+ (struct be_async_event_link_state *) compl);
+ } else if (compl->flags & CQE_FLAGS_COMPLETED_MASK) {
+ status = be_mcc_compl_process(ctrl, compl);
+ atomic_dec(&phba->ctrl.mcc_obj.q.used);
+ }
+ be_mcc_compl_use(compl);
+ num++;
+ }
+
+ if (num)
+ beiscsi_cq_notify(phba, phba->ctrl.mcc_obj.cq.id, true, num);
+
+ spin_unlock_bh(&phba->ctrl.mcc_cq_lock);
+ return status;
+}
+
+/* Wait till no more pending mcc requests are present */
+static int be_mcc_wait_compl(struct beiscsi_hba *phba)
+{
+#define mcc_timeout 120000 /* 5s timeout */
+ int i, status;
+ for (i = 0; i < mcc_timeout; i++) {
+ status = beiscsi_process_mcc(phba);
+ if (status)
+ return status;
+
+ if (atomic_read(&phba->ctrl.mcc_obj.q.used) == 0)
+ break;
+ udelay(100);
+ }
+ if (i == mcc_timeout) {
+ dev_err(&phba->pcidev->dev, "mccq poll timed out\n");
+ return -1;
+ }
+ return 0;
+}
+
+/* Notify MCC requests and wait for completion */
+int be_mcc_notify_wait(struct beiscsi_hba *phba)
+{
+ be_mcc_notify(phba);
+ return be_mcc_wait_compl(phba);
}
static int be_mbox_db_ready_wait(struct be_ctrl_info *ctrl)
@@ -142,6 +254,52 @@
return 0;
}
+/*
+ * Insert the mailbox address into the doorbell in two steps
+ * Polls on the mbox doorbell till a command completion (or a timeout) occurs
+ */
+static int be_mbox_notify_wait(struct beiscsi_hba *phba)
+{
+ int status;
+ u32 val = 0;
+ void __iomem *db = phba->ctrl.db + MPU_MAILBOX_DB_OFFSET;
+ struct be_dma_mem *mbox_mem = &phba->ctrl.mbox_mem;
+ struct be_mcc_mailbox *mbox = mbox_mem->va;
+ struct be_mcc_compl *compl = &mbox->compl;
+ struct be_ctrl_info *ctrl = &phba->ctrl;
+
+ val |= MPU_MAILBOX_DB_HI_MASK;
+ /* at bits 2 - 31 place mbox dma addr msb bits 34 - 63 */
+ val |= (upper_32_bits(mbox_mem->dma) >> 2) << 2;
+ iowrite32(val, db);
+
+ /* wait for ready to be set */
+ status = be_mbox_db_ready_wait(ctrl);
+ if (status != 0)
+ return status;
+
+ val = 0;
+ /* at bits 2 - 31 place mbox dma addr lsb bits 4 - 33 */
+ val |= (u32)(mbox_mem->dma >> 4) << 2;
+ iowrite32(val, db);
+
+ status = be_mbox_db_ready_wait(ctrl);
+ if (status != 0)
+ return status;
+
+ /* A cq entry has been made now */
+ if (be_mcc_compl_is_new(compl)) {
+ status = be_mcc_compl_process(ctrl, &mbox->compl);
+ be_mcc_compl_use(compl);
+ if (status)
+ return status;
+ } else {
+ dev_err(&phba->pcidev->dev, "invalid mailbox completion\n");
+ return -1;
+ }
+ return 0;
+}
+
void be_wrb_hdr_prepare(struct be_mcc_wrb *wrb, int payload_len,
bool embedded, u8 sge_cnt)
{
@@ -203,6 +361,20 @@
return &((struct be_mcc_mailbox *)(mbox_mem->va))->wrb;
}
+struct be_mcc_wrb *wrb_from_mccq(struct beiscsi_hba *phba)
+{
+ struct be_queue_info *mccq = &phba->ctrl.mcc_obj.q;
+ struct be_mcc_wrb *wrb;
+
+ BUG_ON(atomic_read(&mccq->used) >= mccq->len);
+ wrb = queue_head_node(mccq);
+ queue_head_inc(mccq);
+ atomic_inc(&mccq->used);
+ memset(wrb, 0, sizeof(*wrb));
+ return wrb;
+}
+
+
int beiscsi_cmd_eq_create(struct be_ctrl_info *ctrl,
struct be_queue_info *eq, int eq_delay)
{
@@ -212,6 +384,7 @@
struct be_dma_mem *q_mem = &eq->dma_mem;
int status;
+ SE_DEBUG(DBG_LVL_8, "In beiscsi_cmd_eq_create\n");
spin_lock(&ctrl->mbox_lock);
memset(wrb, 0, sizeof(*wrb));
@@ -249,6 +422,7 @@
int status;
u8 *endian_check;
+ SE_DEBUG(DBG_LVL_8, "In be_cmd_fw_initialize\n");
spin_lock(&ctrl->mbox_lock);
memset(wrb, 0, sizeof(*wrb));
@@ -282,6 +456,7 @@
void *ctxt = &req->context;
int status;
+ SE_DEBUG(DBG_LVL_8, "In beiscsi_cmd_cq_create \n");
spin_lock(&ctrl->mbox_lock);
memset(wrb, 0, sizeof(*wrb));
@@ -289,7 +464,6 @@
be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
OPCODE_COMMON_CQ_CREATE, sizeof(*req));
-
if (!q_mem->va)
SE_DEBUG(DBG_LVL_1, "uninitialized q_mem->va\n");
@@ -329,6 +503,53 @@
len_encoded = 0;
return len_encoded;
}
+
+int beiscsi_cmd_mccq_create(struct beiscsi_hba *phba,
+ struct be_queue_info *mccq,
+ struct be_queue_info *cq)
+{
+ struct be_mcc_wrb *wrb;
+ struct be_cmd_req_mcc_create *req;
+ struct be_dma_mem *q_mem = &mccq->dma_mem;
+ struct be_ctrl_info *ctrl;
+ void *ctxt;
+ int status;
+
+ spin_lock(&phba->ctrl.mbox_lock);
+ ctrl = &phba->ctrl;
+ wrb = wrb_from_mbox(&ctrl->mbox_mem);
+ req = embedded_payload(wrb);
+ ctxt = &req->context;
+
+ be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+
+ be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+ OPCODE_COMMON_MCC_CREATE, sizeof(*req));
+
+ req->num_pages = PAGES_4K_SPANNED(q_mem->va, q_mem->size);
+
+ AMAP_SET_BITS(struct amap_mcc_context, fid, ctxt,
+ PCI_FUNC(phba->pcidev->devfn));
+ AMAP_SET_BITS(struct amap_mcc_context, valid, ctxt, 1);
+ AMAP_SET_BITS(struct amap_mcc_context, ring_size, ctxt,
+ be_encoded_q_len(mccq->len));
+ AMAP_SET_BITS(struct amap_mcc_context, cq_id, ctxt, cq->id);
+
+ be_dws_cpu_to_le(ctxt, sizeof(req->context));
+
+ be_cmd_page_addrs_prepare(req->pages, ARRAY_SIZE(req->pages), q_mem);
+
+ status = be_mbox_notify_wait(phba);
+ if (!status) {
+ struct be_cmd_resp_mcc_create *resp = embedded_payload(wrb);
+ mccq->id = le16_to_cpu(resp->id);
+ mccq->created = true;
+ }
+ spin_unlock(&phba->ctrl.mbox_lock);
+
+ return status;
+}
+
int beiscsi_cmd_q_destroy(struct be_ctrl_info *ctrl, struct be_queue_info *q,
int queue_type)
{
@@ -337,6 +558,7 @@
u8 subsys = 0, opcode = 0;
int status;
+ SE_DEBUG(DBG_LVL_8, "In beiscsi_cmd_q_destroy \n");
spin_lock(&ctrl->mbox_lock);
memset(wrb, 0, sizeof(*wrb));
be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
@@ -350,6 +572,10 @@
subsys = CMD_SUBSYSTEM_COMMON;
opcode = OPCODE_COMMON_CQ_DESTROY;
break;
+ case QTYPE_MCCQ:
+ subsys = CMD_SUBSYSTEM_COMMON;
+ opcode = OPCODE_COMMON_MCC_DESTROY;
+ break;
case QTYPE_WRBQ:
subsys = CMD_SUBSYSTEM_ISCSI;
opcode = OPCODE_COMMON_ISCSI_WRBQ_DESTROY;
@@ -377,30 +603,6 @@
return status;
}
-int be_cmd_get_mac_addr(struct be_ctrl_info *ctrl, u8 *mac_addr)
-{
- struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
- struct be_cmd_req_get_mac_addr *req = embedded_payload(wrb);
- int status;
-
- spin_lock(&ctrl->mbox_lock);
- memset(wrb, 0, sizeof(*wrb));
- be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
- be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_ISCSI,
- OPCODE_COMMON_ISCSI_NTWK_GET_NIC_CONFIG,
- sizeof(*req));
-
- status = be_mbox_notify(ctrl);
- if (!status) {
- struct be_cmd_resp_get_mac_addr *resp = embedded_payload(wrb);
-
- memcpy(mac_addr, resp->mac_address, ETH_ALEN);
- }
-
- spin_unlock(&ctrl->mbox_lock);
- return status;
-}
-
int be_cmd_create_default_pdu_queue(struct be_ctrl_info *ctrl,
struct be_queue_info *cq,
struct be_queue_info *dq, int length,
@@ -412,6 +614,7 @@
void *ctxt = &req->context;
int status;
+ SE_DEBUG(DBG_LVL_8, "In be_cmd_create_default_pdu_queue\n");
spin_lock(&ctrl->mbox_lock);
memset(wrb, 0, sizeof(*wrb));
@@ -468,8 +671,10 @@
be_cmd_page_addrs_prepare(req->pages, ARRAY_SIZE(req->pages), q_mem);
status = be_mbox_notify(ctrl);
- if (!status)
+ if (!status) {
wrbq->id = le16_to_cpu(resp->cid);
+ wrbq->created = true;
+ }
spin_unlock(&ctrl->mbox_lock);
return status;
}
diff --git a/drivers/scsi/be2iscsi/be_cmds.h b/drivers/scsi/be2iscsi/be_cmds.h
index c20d686..5de8acb 100644
--- a/drivers/scsi/be2iscsi/be_cmds.h
+++ b/drivers/scsi/be2iscsi/be_cmds.h
@@ -47,6 +47,8 @@
#define CQE_FLAGS_VALID_MASK (1 << 31)
#define CQE_FLAGS_ASYNC_MASK (1 << 30)
+#define CQE_FLAGS_COMPLETED_MASK (1 << 28)
+#define CQE_FLAGS_CONSUMED_MASK (1 << 27)
/* Completion Status */
#define MCC_STATUS_SUCCESS 0x0
@@ -173,7 +175,7 @@
u8 domain; /* dword 0 */
u32 timeout; /* dword 1 */
u32 request_length; /* dword 2 */
- u32 rsvd; /* dword 3 */
+ u32 rsvd0; /* dword 3 */
};
struct be_cmd_resp_hdr {
@@ -382,7 +384,6 @@
#define ETH_ALEN 6
-
struct be_cmd_req_get_mac_addr {
struct be_cmd_req_hdr hdr;
u32 nic_port_count;
@@ -417,14 +418,21 @@
int beiscsi_cmd_q_destroy(struct be_ctrl_info *ctrl, struct be_queue_info *q,
int type);
+int beiscsi_cmd_mccq_create(struct beiscsi_hba *phba,
+ struct be_queue_info *mccq,
+ struct be_queue_info *cq);
+
int be_poll_mcc(struct be_ctrl_info *ctrl);
-unsigned char mgmt_check_supported_fw(struct be_ctrl_info *ctrl);
-int be_cmd_get_mac_addr(struct be_ctrl_info *ctrl, u8 *mac_addr);
+unsigned char mgmt_check_supported_fw(struct be_ctrl_info *ctrl,
+ struct beiscsi_hba *phba);
+int be_cmd_get_mac_addr(struct beiscsi_hba *phba, u8 *mac_addr);
/*ISCSI Functuions */
int be_cmd_fw_initialize(struct be_ctrl_info *ctrl);
struct be_mcc_wrb *wrb_from_mbox(struct be_dma_mem *mbox_mem);
+struct be_mcc_wrb *wrb_from_mccq(struct beiscsi_hba *phba);
+int be_mcc_notify_wait(struct beiscsi_hba *phba);
int be_mbox_notify(struct be_ctrl_info *ctrl);
@@ -531,6 +539,23 @@
u8 valid; /* dword 3 */
} __packed;
+#define SOL_ICD_INDEX_MASK 0x0003FFC0
+struct amap_sol_cqe_ring {
+ u8 hw_sts[8]; /* dword 0 */
+ u8 i_sts[8]; /* dword 0 */
+ u8 i_resp[8]; /* dword 0 */
+ u8 i_flags[7]; /* dword 0 */
+ u8 s; /* dword 0 */
+ u8 i_exp_cmd_sn[32]; /* dword 1 */
+ u8 code[6]; /* dword 2 */
+ u8 icd_index[12]; /* dword 2 */
+ u8 rsvd[6]; /* dword 2 */
+ u8 i_cmd_wnd[8]; /* dword 2 */
+ u8 i_res_cnt[31]; /* dword 3 */
+ u8 valid; /* dword 3 */
+} __packed;
+
+
/**
* Post WRB Queue Doorbell Register used by the host Storage
@@ -664,8 +689,8 @@
#define OPCODE_COMMON_TCP_UPLOAD 56
#define OPCODE_COMMON_ISCSI_ERROR_RECOVERY_INVALIDATE_COMMANDS 1
/* --- CMD_ISCSI_INVALIDATE_CONNECTION_TYPE --- */
-#define CMD_ISCSI_CONNECTION_INVALIDATE 1
-#define CMD_ISCSI_CONNECTION_ISSUE_TCP_RST 2
+#define CMD_ISCSI_CONNECTION_INVALIDATE 0x8001
+#define CMD_ISCSI_CONNECTION_ISSUE_TCP_RST 0x8002
#define OPCODE_ISCSI_INI_DRIVER_INVALIDATE_CONNECTION 42
#define INI_WR_CMD 1 /* Initiator write command */
diff --git a/drivers/scsi/be2iscsi/be_iscsi.c b/drivers/scsi/be2iscsi/be_iscsi.c
index 2fd2544..d587b03 100644
--- a/drivers/scsi/be2iscsi/be_iscsi.c
+++ b/drivers/scsi/be2iscsi/be_iscsi.c
@@ -67,11 +67,11 @@
cmds_max = beiscsi_ep->phba->params.wrbs_per_cxn;
}
- cls_session = iscsi_session_setup(&beiscsi_iscsi_transport,
- shost, cmds_max,
- sizeof(*beiscsi_sess),
- sizeof(*io_task),
- initial_cmdsn, ISCSI_MAX_TARGET);
+ cls_session = iscsi_session_setup(&beiscsi_iscsi_transport,
+ shost, cmds_max,
+ sizeof(*beiscsi_sess),
+ sizeof(*io_task),
+ initial_cmdsn, ISCSI_MAX_TARGET);
if (!cls_session)
return NULL;
sess = cls_session->dd_data;
@@ -297,7 +297,7 @@
switch (param) {
case ISCSI_HOST_PARAM_HWADDRESS:
- be_cmd_get_mac_addr(&phba->ctrl, phba->mac_address);
+ be_cmd_get_mac_addr(phba, phba->mac_address);
len = sysfs_format_mac(buf, phba->mac_address, ETH_ALEN);
break;
default:
@@ -377,16 +377,12 @@
struct beiscsi_conn *beiscsi_conn = conn->dd_data;
struct beiscsi_endpoint *beiscsi_ep;
struct beiscsi_offload_params params;
- struct iscsi_session *session = conn->session;
- struct Scsi_Host *shost = iscsi_session_to_shost(session->cls_session);
- struct beiscsi_hba *phba = iscsi_host_priv(shost);
memset(¶ms, 0, sizeof(struct beiscsi_offload_params));
beiscsi_ep = beiscsi_conn->ep;
if (!beiscsi_ep)
SE_DEBUG(DBG_LVL_1, "In beiscsi_conn_start , no beiscsi_ep\n");
- free_mgmt_sgl_handle(phba, beiscsi_conn->plogin_sgl_handle);
beiscsi_conn->login_in_progress = 0;
beiscsi_set_params_for_offld(beiscsi_conn, ¶ms);
beiscsi_offload_connection(beiscsi_conn, ¶ms);
@@ -498,6 +494,13 @@
SE_DEBUG(DBG_LVL_1, "shost is NULL \n");
return ERR_PTR(ret);
}
+
+ if (phba->state) {
+ ret = -EBUSY;
+ SE_DEBUG(DBG_LVL_1, "The Adapet state is Not UP \n");
+ return ERR_PTR(ret);
+ }
+
ep = iscsi_create_endpoint(sizeof(struct beiscsi_endpoint));
if (!ep) {
ret = -ENOMEM;
diff --git a/drivers/scsi/be2iscsi/be_main.c b/drivers/scsi/be2iscsi/be_main.c
index 4f1aca3..1a557fa 100644
--- a/drivers/scsi/be2iscsi/be_main.c
+++ b/drivers/scsi/be2iscsi/be_main.c
@@ -39,7 +39,8 @@
static unsigned int be_iopoll_budget = 10;
static unsigned int be_max_phys_size = 64;
-static unsigned int enable_msix;
+static unsigned int enable_msix = 1;
+static unsigned int ring_mode;
MODULE_DEVICE_TABLE(pci, beiscsi_pci_id_table);
MODULE_DESCRIPTION(DRV_DESC " " BUILD_STR);
@@ -58,6 +59,17 @@
return 0;
}
+/*------------------- PCI Driver operations and data ----------------- */
+static DEFINE_PCI_DEVICE_TABLE(beiscsi_pci_id_table) = {
+ { PCI_DEVICE(BE_VENDOR_ID, BE_DEVICE_ID1) },
+ { PCI_DEVICE(BE_VENDOR_ID, OC_DEVICE_ID1) },
+ { PCI_DEVICE(BE_VENDOR_ID, OC_DEVICE_ID2) },
+ { PCI_DEVICE(BE_VENDOR_ID, OC_DEVICE_ID3) },
+ { PCI_DEVICE(BE_VENDOR_ID, OC_DEVICE_ID4) },
+ { 0 }
+};
+MODULE_DEVICE_TABLE(pci, beiscsi_pci_id_table);
+
static struct scsi_host_template beiscsi_sht = {
.module = THIS_MODULE,
.name = "ServerEngines 10Gbe open-iscsi Initiator Driver",
@@ -76,16 +88,8 @@
.cmd_per_lun = BEISCSI_CMD_PER_LUN,
.use_clustering = ENABLE_CLUSTERING,
};
-static struct scsi_transport_template *beiscsi_scsi_transport;
-/*------------------- PCI Driver operations and data ----------------- */
-static DEFINE_PCI_DEVICE_TABLE(beiscsi_pci_id_table) = {
- { PCI_DEVICE(BE_VENDOR_ID, BE_DEVICE_ID1) },
- { PCI_DEVICE(BE_VENDOR_ID, OC_DEVICE_ID1) },
- { PCI_DEVICE(BE_VENDOR_ID, OC_DEVICE_ID2) },
- { 0 }
-};
-MODULE_DEVICE_TABLE(pci, beiscsi_pci_id_table);
+static struct scsi_transport_template *beiscsi_scsi_transport;
static struct beiscsi_hba *beiscsi_hba_alloc(struct pci_dev *pcidev)
{
@@ -104,7 +108,6 @@
shost->max_cmd_len = BEISCSI_MAX_CMD_LEN;
shost->max_lun = BEISCSI_NUM_MAX_LUN;
shost->transportt = beiscsi_scsi_transport;
-
phba = iscsi_host_priv(shost);
memset(phba, 0, sizeof(*phba));
phba->shost = shost;
@@ -181,6 +184,7 @@
return ret;
}
+ pci_set_master(pcidev);
if (pci_set_consistent_dma_mask(pcidev, DMA_BIT_MASK(64))) {
ret = pci_set_consistent_dma_mask(pcidev, DMA_BIT_MASK(32));
if (ret) {
@@ -203,7 +207,6 @@
status = beiscsi_map_pci_bars(phba, pdev);
if (status)
return status;
-
mbox_mem_alloc->size = sizeof(struct be_mcc_mailbox) + 16;
mbox_mem_alloc->va = pci_alloc_consistent(pdev,
mbox_mem_alloc->size,
@@ -219,6 +222,9 @@
mbox_mem_align->dma = PTR_ALIGN(mbox_mem_alloc->dma, 16);
memset(mbox_mem_align->va, 0, sizeof(struct be_mcc_mailbox));
spin_lock_init(&ctrl->mbox_lock);
+ spin_lock_init(&phba->ctrl.mcc_lock);
+ spin_lock_init(&phba->ctrl.mcc_cq_lock);
+
return status;
}
@@ -268,6 +274,113 @@
}
/**
+ * be_isr_mcc - The isr routine of the driver.
+ * @irq: Not used
+ * @dev_id: Pointer to host adapter structure
+ */
+static irqreturn_t be_isr_mcc(int irq, void *dev_id)
+{
+ struct beiscsi_hba *phba;
+ struct be_eq_entry *eqe = NULL;
+ struct be_queue_info *eq;
+ struct be_queue_info *mcc;
+ unsigned int num_eq_processed;
+ struct be_eq_obj *pbe_eq;
+ unsigned long flags;
+
+ pbe_eq = dev_id;
+ eq = &pbe_eq->q;
+ phba = pbe_eq->phba;
+ mcc = &phba->ctrl.mcc_obj.cq;
+ eqe = queue_tail_node(eq);
+ if (!eqe)
+ SE_DEBUG(DBG_LVL_1, "eqe is NULL\n");
+
+ num_eq_processed = 0;
+
+ while (eqe->dw[offsetof(struct amap_eq_entry, valid) / 32]
+ & EQE_VALID_MASK) {
+ if (((eqe->dw[offsetof(struct amap_eq_entry,
+ resource_id) / 32] &
+ EQE_RESID_MASK) >> 16) == mcc->id) {
+ spin_lock_irqsave(&phba->isr_lock, flags);
+ phba->todo_mcc_cq = 1;
+ spin_unlock_irqrestore(&phba->isr_lock, flags);
+ }
+ AMAP_SET_BITS(struct amap_eq_entry, valid, eqe, 0);
+ queue_tail_inc(eq);
+ eqe = queue_tail_node(eq);
+ num_eq_processed++;
+ }
+ if (phba->todo_mcc_cq)
+ queue_work(phba->wq, &phba->work_cqs);
+ if (num_eq_processed)
+ hwi_ring_eq_db(phba, eq->id, 1, num_eq_processed, 1, 1);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * be_isr_msix - The isr routine of the driver.
+ * @irq: Not used
+ * @dev_id: Pointer to host adapter structure
+ */
+static irqreturn_t be_isr_msix(int irq, void *dev_id)
+{
+ struct beiscsi_hba *phba;
+ struct be_eq_entry *eqe = NULL;
+ struct be_queue_info *eq;
+ struct be_queue_info *cq;
+ unsigned int num_eq_processed;
+ struct be_eq_obj *pbe_eq;
+ unsigned long flags;
+
+ pbe_eq = dev_id;
+ eq = &pbe_eq->q;
+ cq = pbe_eq->cq;
+ eqe = queue_tail_node(eq);
+ if (!eqe)
+ SE_DEBUG(DBG_LVL_1, "eqe is NULL\n");
+
+ phba = pbe_eq->phba;
+ num_eq_processed = 0;
+ if (blk_iopoll_enabled) {
+ while (eqe->dw[offsetof(struct amap_eq_entry, valid) / 32]
+ & EQE_VALID_MASK) {
+ if (!blk_iopoll_sched_prep(&pbe_eq->iopoll))
+ blk_iopoll_sched(&pbe_eq->iopoll);
+
+ AMAP_SET_BITS(struct amap_eq_entry, valid, eqe, 0);
+ queue_tail_inc(eq);
+ eqe = queue_tail_node(eq);
+ num_eq_processed++;
+ }
+ if (num_eq_processed)
+ hwi_ring_eq_db(phba, eq->id, 1, num_eq_processed, 0, 1);
+
+ return IRQ_HANDLED;
+ } else {
+ while (eqe->dw[offsetof(struct amap_eq_entry, valid) / 32]
+ & EQE_VALID_MASK) {
+ spin_lock_irqsave(&phba->isr_lock, flags);
+ phba->todo_cq = 1;
+ spin_unlock_irqrestore(&phba->isr_lock, flags);
+ AMAP_SET_BITS(struct amap_eq_entry, valid, eqe, 0);
+ queue_tail_inc(eq);
+ eqe = queue_tail_node(eq);
+ num_eq_processed++;
+ }
+ if (phba->todo_cq)
+ queue_work(phba->wq, &phba->work_cqs);
+
+ if (num_eq_processed)
+ hwi_ring_eq_db(phba, eq->id, 1, num_eq_processed, 1, 1);
+
+ return IRQ_HANDLED;
+ }
+}
+
+/**
* be_isr - The isr routine of the driver.
* @irq: Not used
* @dev_id: Pointer to host adapter structure
@@ -280,48 +393,70 @@
struct be_eq_entry *eqe = NULL;
struct be_queue_info *eq;
struct be_queue_info *cq;
+ struct be_queue_info *mcc;
unsigned long flags, index;
- unsigned int num_eq_processed;
+ unsigned int num_mcceq_processed, num_ioeq_processed;
struct be_ctrl_info *ctrl;
+ struct be_eq_obj *pbe_eq;
int isr;
phba = dev_id;
- if (!enable_msix) {
- ctrl = &phba->ctrl;;
- isr = ioread32(ctrl->csr + CEV_ISR0_OFFSET +
- (PCI_FUNC(ctrl->pdev->devfn) * CEV_ISR_SIZE));
- if (!isr)
- return IRQ_NONE;
- }
+ ctrl = &phba->ctrl;;
+ isr = ioread32(ctrl->csr + CEV_ISR0_OFFSET +
+ (PCI_FUNC(ctrl->pdev->devfn) * CEV_ISR_SIZE));
+ if (!isr)
+ return IRQ_NONE;
phwi_ctrlr = phba->phwi_ctrlr;
phwi_context = phwi_ctrlr->phwi_ctxt;
- eq = &phwi_context->be_eq.q;
- cq = &phwi_context->be_cq;
+ pbe_eq = &phwi_context->be_eq[0];
+
+ eq = &phwi_context->be_eq[0].q;
+ mcc = &phba->ctrl.mcc_obj.cq;
index = 0;
eqe = queue_tail_node(eq);
if (!eqe)
SE_DEBUG(DBG_LVL_1, "eqe is NULL\n");
- num_eq_processed = 0;
+ num_ioeq_processed = 0;
+ num_mcceq_processed = 0;
if (blk_iopoll_enabled) {
while (eqe->dw[offsetof(struct amap_eq_entry, valid) / 32]
& EQE_VALID_MASK) {
- if (!blk_iopoll_sched_prep(&phba->iopoll))
- blk_iopoll_sched(&phba->iopoll);
-
+ if (((eqe->dw[offsetof(struct amap_eq_entry,
+ resource_id) / 32] &
+ EQE_RESID_MASK) >> 16) == mcc->id) {
+ spin_lock_irqsave(&phba->isr_lock, flags);
+ phba->todo_mcc_cq = 1;
+ spin_unlock_irqrestore(&phba->isr_lock, flags);
+ num_mcceq_processed++;
+ } else {
+ if (!blk_iopoll_sched_prep(&pbe_eq->iopoll))
+ blk_iopoll_sched(&pbe_eq->iopoll);
+ num_ioeq_processed++;
+ }
AMAP_SET_BITS(struct amap_eq_entry, valid, eqe, 0);
queue_tail_inc(eq);
eqe = queue_tail_node(eq);
- num_eq_processed++;
- SE_DEBUG(DBG_LVL_8, "Valid EQE\n");
}
- if (num_eq_processed) {
- hwi_ring_eq_db(phba, eq->id, 0, num_eq_processed, 0, 1);
+ if (num_ioeq_processed || num_mcceq_processed) {
+ if (phba->todo_mcc_cq)
+ queue_work(phba->wq, &phba->work_cqs);
+
+ if ((num_mcceq_processed) && (!num_ioeq_processed))
+ hwi_ring_eq_db(phba, eq->id, 0,
+ (num_ioeq_processed +
+ num_mcceq_processed) , 1, 1);
+ else
+ hwi_ring_eq_db(phba, eq->id, 0,
+ (num_ioeq_processed +
+ num_mcceq_processed), 0, 1);
+
return IRQ_HANDLED;
} else
return IRQ_NONE;
} else {
+ cq = &phwi_context->be_cq[0];
while (eqe->dw[offsetof(struct amap_eq_entry, valid) / 32]
& EQE_VALID_MASK) {
@@ -339,13 +474,14 @@
AMAP_SET_BITS(struct amap_eq_entry, valid, eqe, 0);
queue_tail_inc(eq);
eqe = queue_tail_node(eq);
- num_eq_processed++;
+ num_ioeq_processed++;
}
if (phba->todo_cq || phba->todo_mcc_cq)
queue_work(phba->wq, &phba->work_cqs);
- if (num_eq_processed) {
- hwi_ring_eq_db(phba, eq->id, 0, num_eq_processed, 1, 1);
+ if (num_ioeq_processed) {
+ hwi_ring_eq_db(phba, eq->id, 0,
+ num_ioeq_processed, 1, 1);
return IRQ_HANDLED;
} else
return IRQ_NONE;
@@ -355,13 +491,32 @@
static int beiscsi_init_irqs(struct beiscsi_hba *phba)
{
struct pci_dev *pcidev = phba->pcidev;
- int ret;
+ struct hwi_controller *phwi_ctrlr;
+ struct hwi_context_memory *phwi_context;
+ int ret, msix_vec, i = 0;
+ char desc[32];
- ret = request_irq(pcidev->irq, be_isr, IRQF_SHARED, "beiscsi", phba);
- if (ret) {
- shost_printk(KERN_ERR, phba->shost, "beiscsi_init_irqs-"
- "Failed to register irq\\n");
- return ret;
+ phwi_ctrlr = phba->phwi_ctrlr;
+ phwi_context = phwi_ctrlr->phwi_ctxt;
+
+ if (phba->msix_enabled) {
+ for (i = 0; i < phba->num_cpus; i++) {
+ sprintf(desc, "beiscsi_msix_%04x", i);
+ msix_vec = phba->msix_entries[i].vector;
+ ret = request_irq(msix_vec, be_isr_msix, 0, desc,
+ &phwi_context->be_eq[i]);
+ }
+ msix_vec = phba->msix_entries[i].vector;
+ ret = request_irq(msix_vec, be_isr_mcc, 0, "beiscsi_msix_mcc",
+ &phwi_context->be_eq[i]);
+ } else {
+ ret = request_irq(pcidev->irq, be_isr, IRQF_SHARED,
+ "beiscsi", phba);
+ if (ret) {
+ shost_printk(KERN_ERR, phba->shost, "beiscsi_init_irqs-"
+ "Failed to register irq\\n");
+ return ret;
+ }
}
return 0;
}
@@ -378,15 +533,6 @@
iowrite32(val, phba->db_va + DB_CQ_OFFSET);
}
-/*
- * async pdus include
- * a. unsolicited NOP-In (target initiated NOP-In)
- * b. Async Messages
- * c. Reject PDU
- * d. Login response
- * These headers arrive unprocessed by the EP firmware and iSCSI layer
- * process them
- */
static unsigned int
beiscsi_process_async_pdu(struct beiscsi_conn *beiscsi_conn,
struct beiscsi_hba *phba,
@@ -397,6 +543,9 @@
{
struct iscsi_conn *conn = beiscsi_conn->conn;
struct iscsi_session *session = conn->session;
+ struct iscsi_task *task;
+ struct beiscsi_io_task *io_task;
+ struct iscsi_hdr *login_hdr;
switch (ppdu->dw[offsetof(struct amap_pdu_base, opcode) / 32] &
PDUBASE_OPCODE_MASK) {
@@ -412,6 +561,10 @@
SE_DEBUG(DBG_LVL_1, "In ISCSI_OP_REJECT\n");
break;
case ISCSI_OP_LOGIN_RSP:
+ task = conn->login_task;
+ io_task = task->dd_data;
+ login_hdr = (struct iscsi_hdr *)ppdu;
+ login_hdr->itt = io_task->libiscsi_itt;
break;
default:
shost_printk(KERN_WARNING, phba->shost,
@@ -440,7 +593,8 @@
io_sgl_alloc_index];
phba->io_sgl_hndl_base[phba->io_sgl_alloc_index] = NULL;
phba->io_sgl_hndl_avbl--;
- if (phba->io_sgl_alloc_index == (phba->params.ios_per_ctrl - 1))
+ if (phba->io_sgl_alloc_index == (phba->params.
+ ios_per_ctrl - 1))
phba->io_sgl_alloc_index = 0;
else
phba->io_sgl_alloc_index++;
@@ -490,9 +644,18 @@
phwi_ctrlr = phba->phwi_ctrlr;
pwrb_context = &phwi_ctrlr->wrb_context[cid];
- pwrb_handle = pwrb_context->pwrb_handle_base[index];
- pwrb_handle->wrb_index = index;
- pwrb_handle->nxt_wrb_index = index;
+ if (pwrb_context->wrb_handles_available) {
+ pwrb_handle = pwrb_context->pwrb_handle_base[
+ pwrb_context->alloc_index];
+ pwrb_context->wrb_handles_available--;
+ pwrb_handle->nxt_wrb_index = pwrb_handle->wrb_index;
+ if (pwrb_context->alloc_index ==
+ (phba->params.wrbs_per_cxn - 1))
+ pwrb_context->alloc_index = 0;
+ else
+ pwrb_context->alloc_index++;
+ } else
+ pwrb_handle = NULL;
return pwrb_handle;
}
@@ -508,11 +671,20 @@
free_wrb_handle(struct beiscsi_hba *phba, struct hwi_wrb_context *pwrb_context,
struct wrb_handle *pwrb_handle)
{
+ if (!ring_mode)
+ pwrb_context->pwrb_handle_base[pwrb_context->free_index] =
+ pwrb_handle;
+ pwrb_context->wrb_handles_available++;
+ if (pwrb_context->free_index == (phba->params.wrbs_per_cxn - 1))
+ pwrb_context->free_index = 0;
+ else
+ pwrb_context->free_index++;
+
SE_DEBUG(DBG_LVL_8,
- "FREE WRB: pwrb_handle=%p free_index=%d=0x%x"
+ "FREE WRB: pwrb_handle=%p free_index=0x%x"
"wrb_handles_available=%d \n",
pwrb_handle, pwrb_context->free_index,
- pwrb_context->free_index, pwrb_context->wrb_handles_available);
+ pwrb_context->wrb_handles_available);
}
static struct sgl_handle *alloc_mgmt_sgl_handle(struct beiscsi_hba *phba)
@@ -540,6 +712,8 @@
free_mgmt_sgl_handle(struct beiscsi_hba *phba, struct sgl_handle *psgl_handle)
{
+ SE_DEBUG(DBG_LVL_8, "In free_mgmt_sgl_handle,eh_sgl_free_index=%d \n",
+ phba->eh_sgl_free_index);
if (phba->eh_sgl_hndl_base[phba->eh_sgl_free_index]) {
/*
* this can happen if clean_task is called on a task that
@@ -572,10 +746,10 @@
u32 resid = 0, exp_cmdsn, max_cmdsn;
u8 rsp, status, flags;
- exp_cmdsn = be32_to_cpu(psol->
+ exp_cmdsn = (psol->
dw[offsetof(struct amap_sol_cqe, i_exp_cmd_sn) / 32]
& SOL_EXP_CMD_SN_MASK);
- max_cmdsn = be32_to_cpu((psol->
+ max_cmdsn = ((psol->
dw[offsetof(struct amap_sol_cqe, i_exp_cmd_sn) / 32]
& SOL_EXP_CMD_SN_MASK) +
((psol->dw[offsetof(struct amap_sol_cqe, i_cmd_wnd)
@@ -610,9 +784,9 @@
}
if (status == SAM_STAT_CHECK_CONDITION) {
+ unsigned short *slen = (unsigned short *)sts_bhs->sense_info;
sense = sts_bhs->sense_info + sizeof(unsigned short);
- sense_len =
- cpu_to_be16((unsigned short)(sts_bhs->sense_info[0]));
+ sense_len = cpu_to_be16(*slen);
memcpy(task->sc->sense_buffer, sense,
min_t(u16, sense_len, SCSI_SENSE_BUFFERSIZE));
}
@@ -620,8 +794,8 @@
if (psol->dw[offsetof(struct amap_sol_cqe, i_res_cnt) / 32]
& SOL_RES_CNT_MASK)
conn->rxdata_octets += (psol->
- dw[offsetof(struct amap_sol_cqe, i_res_cnt) / 32]
- & SOL_RES_CNT_MASK);
+ dw[offsetof(struct amap_sol_cqe, i_res_cnt) / 32]
+ & SOL_RES_CNT_MASK);
}
unmap:
scsi_dma_unmap(io_task->scsi_cmnd);
@@ -633,6 +807,7 @@
struct iscsi_task *task, struct sol_cqe *psol)
{
struct iscsi_logout_rsp *hdr;
+ struct beiscsi_io_task *io_task = task->dd_data;
struct iscsi_conn *conn = beiscsi_conn->conn;
hdr = (struct iscsi_logout_rsp *)task->hdr;
@@ -651,7 +826,7 @@
((psol->dw[offsetof(struct amap_sol_cqe, i_cmd_wnd)
/ 32] & SOL_CMD_WND_MASK) >> 24) - 1);
hdr->hlength = 0;
-
+ hdr->itt = io_task->libiscsi_itt;
__iscsi_complete_pdu(conn, (struct iscsi_hdr *)hdr, NULL, 0);
}
@@ -661,6 +836,7 @@
{
struct iscsi_tm_rsp *hdr;
struct iscsi_conn *conn = beiscsi_conn->conn;
+ struct beiscsi_io_task *io_task = task->dd_data;
hdr = (struct iscsi_tm_rsp *)task->hdr;
hdr->flags = ((psol->dw[offsetof(struct amap_sol_cqe, i_flags) / 32]
@@ -668,11 +844,12 @@
hdr->response = (psol->dw[offsetof(struct amap_sol_cqe, i_resp) /
32] & SOL_RESP_MASK);
hdr->exp_cmdsn = cpu_to_be32(psol->dw[offsetof(struct amap_sol_cqe,
- i_exp_cmd_sn) / 32] & SOL_EXP_CMD_SN_MASK);
+ i_exp_cmd_sn) / 32] & SOL_EXP_CMD_SN_MASK);
hdr->max_cmdsn = be32_to_cpu((psol->dw[offsetof(struct amap_sol_cqe,
i_exp_cmd_sn) / 32] & SOL_EXP_CMD_SN_MASK) +
((psol->dw[offsetof(struct amap_sol_cqe, i_cmd_wnd)
/ 32] & SOL_CMD_WND_MASK) >> 24) - 1);
+ hdr->itt = io_task->libiscsi_itt;
__iscsi_complete_pdu(conn, (struct iscsi_hdr *)hdr, NULL, 0);
}
@@ -681,18 +858,36 @@
struct beiscsi_hba *phba, struct sol_cqe *psol)
{
struct hwi_wrb_context *pwrb_context;
- struct wrb_handle *pwrb_handle;
+ struct wrb_handle *pwrb_handle = NULL;
+ struct sgl_handle *psgl_handle = NULL;
struct hwi_controller *phwi_ctrlr;
+ struct iscsi_task *task;
+ struct beiscsi_io_task *io_task;
struct iscsi_conn *conn = beiscsi_conn->conn;
struct iscsi_session *session = conn->session;
phwi_ctrlr = phba->phwi_ctrlr;
- pwrb_context = &phwi_ctrlr->wrb_context[((psol->
+ if (ring_mode) {
+ psgl_handle = phba->sgl_hndl_array[((psol->
+ dw[offsetof(struct amap_sol_cqe_ring, icd_index) /
+ 32] & SOL_ICD_INDEX_MASK) >> 6)];
+ pwrb_context = &phwi_ctrlr->wrb_context[psgl_handle->cid];
+ task = psgl_handle->task;
+ pwrb_handle = NULL;
+ } else {
+ pwrb_context = &phwi_ctrlr->wrb_context[((psol->
dw[offsetof(struct amap_sol_cqe, cid) / 32] &
SOL_CID_MASK) >> 6)];
- pwrb_handle = pwrb_context->pwrb_handle_basestd[((psol->
+ pwrb_handle = pwrb_context->pwrb_handle_basestd[((psol->
dw[offsetof(struct amap_sol_cqe, wrb_index) /
32] & SOL_WRB_INDEX_MASK) >> 16)];
+ task = pwrb_handle->pio_handle;
+ }
+
+ io_task = task->dd_data;
+ spin_lock(&phba->mgmt_sgl_lock);
+ free_mgmt_sgl_handle(phba, io_task->psgl_handle);
+ spin_unlock(&phba->mgmt_sgl_lock);
spin_lock_bh(&session->lock);
free_wrb_handle(phba, pwrb_context, pwrb_handle);
spin_unlock_bh(&session->lock);
@@ -704,6 +899,7 @@
{
struct iscsi_nopin *hdr;
struct iscsi_conn *conn = beiscsi_conn->conn;
+ struct beiscsi_io_task *io_task = task->dd_data;
hdr = (struct iscsi_nopin *)task->hdr;
hdr->flags = ((psol->dw[offsetof(struct amap_sol_cqe, i_flags) / 32]
@@ -715,6 +911,7 @@
((psol->dw[offsetof(struct amap_sol_cqe, i_cmd_wnd)
/ 32] & SOL_CMD_WND_MASK) >> 24) - 1);
hdr->opcode = ISCSI_OP_NOOP_IN;
+ hdr->itt = io_task->libiscsi_itt;
__iscsi_complete_pdu(conn, (struct iscsi_hdr *)hdr, NULL, 0);
}
@@ -726,25 +923,33 @@
struct iscsi_wrb *pwrb = NULL;
struct hwi_controller *phwi_ctrlr;
struct iscsi_task *task;
- struct beiscsi_io_task *io_task;
+ struct sgl_handle *psgl_handle = NULL;
+ unsigned int type;
struct iscsi_conn *conn = beiscsi_conn->conn;
struct iscsi_session *session = conn->session;
phwi_ctrlr = phba->phwi_ctrlr;
-
- pwrb_context = &phwi_ctrlr->
- wrb_context[((psol->dw[offsetof(struct amap_sol_cqe, cid) / 32]
- & SOL_CID_MASK) >> 6)];
- pwrb_handle = pwrb_context->pwrb_handle_basestd[((psol->
+ if (ring_mode) {
+ psgl_handle = phba->sgl_hndl_array[((psol->
+ dw[offsetof(struct amap_sol_cqe_ring, icd_index) /
+ 32] & SOL_ICD_INDEX_MASK) >> 6)];
+ task = psgl_handle->task;
+ type = psgl_handle->type;
+ } else {
+ pwrb_context = &phwi_ctrlr->
+ wrb_context[((psol->dw[offsetof
+ (struct amap_sol_cqe, cid) / 32]
+ & SOL_CID_MASK) >> 6)];
+ pwrb_handle = pwrb_context->pwrb_handle_basestd[((psol->
dw[offsetof(struct amap_sol_cqe, wrb_index) /
32] & SOL_WRB_INDEX_MASK) >> 16)];
-
- task = pwrb_handle->pio_handle;
- io_task = task->dd_data;
+ task = pwrb_handle->pio_handle;
+ pwrb = pwrb_handle->pwrb;
+ type = (pwrb->dw[offsetof(struct amap_iscsi_wrb, type) / 32] &
+ WRB_TYPE_MASK) >> 28;
+ }
spin_lock_bh(&session->lock);
- pwrb = pwrb_handle->pwrb;
- switch ((pwrb->dw[offsetof(struct amap_iscsi_wrb, type) / 32] &
- WRB_TYPE_MASK) >> 28) {
+ switch (type) {
case HWH_TYPE_IO:
case HWH_TYPE_IO_RD:
if ((task->hdr->opcode & ISCSI_OPCODE_MASK) ==
@@ -773,12 +978,21 @@
break;
default:
- shost_printk(KERN_WARNING, phba->shost,
- "wrb_index 0x%x CID 0x%x\n",
- ((psol->dw[offsetof(struct amap_iscsi_wrb, type) /
- 32] & SOL_WRB_INDEX_MASK) >> 16),
- ((psol->dw[offsetof(struct amap_sol_cqe, cid) / 32]
- & SOL_CID_MASK) >> 6));
+ if (ring_mode)
+ shost_printk(KERN_WARNING, phba->shost,
+ "In hwi_complete_cmd, unknown type = %d"
+ "icd_index 0x%x CID 0x%x\n", type,
+ ((psol->dw[offsetof(struct amap_sol_cqe_ring,
+ icd_index) / 32] & SOL_ICD_INDEX_MASK) >> 6),
+ psgl_handle->cid);
+ else
+ shost_printk(KERN_WARNING, phba->shost,
+ "In hwi_complete_cmd, unknown type = %d"
+ "wrb_index 0x%x CID 0x%x\n", type,
+ ((psol->dw[offsetof(struct amap_iscsi_wrb,
+ type) / 32] & SOL_WRB_INDEX_MASK) >> 16),
+ ((psol->dw[offsetof(struct amap_sol_cqe,
+ cid) / 32] & SOL_CID_MASK) >> 6));
break;
}
@@ -1208,40 +1422,55 @@
hwi_post_async_buffers(phba, pasync_handle->is_header);
}
-static unsigned int beiscsi_process_cq(struct beiscsi_hba *phba)
+
+static unsigned int beiscsi_process_cq(struct be_eq_obj *pbe_eq)
{
- struct hwi_controller *phwi_ctrlr;
- struct hwi_context_memory *phwi_context;
struct be_queue_info *cq;
struct sol_cqe *sol;
struct dmsg_cqe *dmsg;
unsigned int num_processed = 0;
unsigned int tot_nump = 0;
struct beiscsi_conn *beiscsi_conn;
+ struct sgl_handle *psgl_handle = NULL;
+ struct beiscsi_hba *phba;
- phwi_ctrlr = phba->phwi_ctrlr;
- phwi_context = phwi_ctrlr->phwi_ctxt;
- cq = &phwi_context->be_cq;
+ cq = pbe_eq->cq;
sol = queue_tail_node(cq);
+ phba = pbe_eq->phba;
while (sol->dw[offsetof(struct amap_sol_cqe, valid) / 32] &
CQE_VALID_MASK) {
be_dws_le_to_cpu(sol, sizeof(struct sol_cqe));
- beiscsi_conn = phba->conn_table[(u32) (sol->
+ if (ring_mode) {
+ psgl_handle = phba->sgl_hndl_array[((sol->
+ dw[offsetof(struct amap_sol_cqe_ring,
+ icd_index) / 32] & SOL_ICD_INDEX_MASK)
+ >> 6)];
+ beiscsi_conn = phba->conn_table[psgl_handle->cid];
+ if (!beiscsi_conn || !beiscsi_conn->ep) {
+ shost_printk(KERN_WARNING, phba->shost,
+ "Connection table empty for cid = %d\n",
+ psgl_handle->cid);
+ return 0;
+ }
+
+ } else {
+ beiscsi_conn = phba->conn_table[(u32) (sol->
dw[offsetof(struct amap_sol_cqe, cid) / 32] &
SOL_CID_MASK) >> 6];
- if (!beiscsi_conn || !beiscsi_conn->ep) {
- shost_printk(KERN_WARNING, phba->shost,
+ if (!beiscsi_conn || !beiscsi_conn->ep) {
+ shost_printk(KERN_WARNING, phba->shost,
"Connection table empty for cid = %d\n",
(u32)(sol->dw[offsetof(struct amap_sol_cqe,
cid) / 32] & SOL_CID_MASK) >> 6);
- return 0;
+ return 0;
+ }
}
if (num_processed >= 32) {
- hwi_ring_cq_db(phba, phwi_context->be_cq.id,
+ hwi_ring_cq_db(phba, cq->id,
num_processed, 0, 0);
tot_nump += num_processed;
num_processed = 0;
@@ -1258,8 +1487,12 @@
hwi_complete_drvr_msgs(beiscsi_conn, phba, sol);
break;
case UNSOL_HDR_NOTIFY:
+ SE_DEBUG(DBG_LVL_8, "Received UNSOL_HDR_ NOTIFY\n");
+ hwi_process_default_pdu_ring(beiscsi_conn, phba,
+ (struct i_t_dpdu_cqe *)sol);
+ break;
case UNSOL_DATA_NOTIFY:
- SE_DEBUG(DBG_LVL_8, "Received UNSOL_HDR/DATA_NOTIFY\n");
+ SE_DEBUG(DBG_LVL_8, "Received UNSOL_DATA_NOTIFY\n");
hwi_process_default_pdu_ring(beiscsi_conn, phba,
(struct i_t_dpdu_cqe *)sol);
break;
@@ -1278,13 +1511,21 @@
case CMD_CXN_KILLED_ITT_INVALID:
case CMD_CXN_KILLED_SEQ_OUTOFORDER:
case CMD_CXN_KILLED_INVALID_DATASN_RCVD:
- SE_DEBUG(DBG_LVL_1,
+ if (ring_mode) {
+ SE_DEBUG(DBG_LVL_1,
+ "CQ Error notification for cmd.. "
+ "code %d cid 0x%x\n",
+ sol->dw[offsetof(struct amap_sol_cqe, code) /
+ 32] & CQE_CODE_MASK, psgl_handle->cid);
+ } else {
+ SE_DEBUG(DBG_LVL_1,
"CQ Error notification for cmd.. "
"code %d cid 0x%x\n",
sol->dw[offsetof(struct amap_sol_cqe, code) /
32] & CQE_CODE_MASK,
(sol->dw[offsetof(struct amap_sol_cqe, cid) /
32] & SOL_CID_MASK));
+ }
break;
case UNSOL_DATA_DIGEST_ERROR_NOTIFY:
SE_DEBUG(DBG_LVL_1,
@@ -1306,23 +1547,37 @@
case CXN_KILLED_OVER_RUN_RESIDUAL:
case CXN_KILLED_UNDER_RUN_RESIDUAL:
case CXN_KILLED_CMND_DATA_NOT_ON_SAME_CONN:
- SE_DEBUG(DBG_LVL_1, "CQ Error %d, resetting CID "
+ if (ring_mode) {
+ SE_DEBUG(DBG_LVL_1, "CQ Error %d, reset CID "
+ "0x%x...\n",
+ sol->dw[offsetof(struct amap_sol_cqe, code) /
+ 32] & CQE_CODE_MASK, psgl_handle->cid);
+ } else {
+ SE_DEBUG(DBG_LVL_1, "CQ Error %d, reset CID "
"0x%x...\n",
sol->dw[offsetof(struct amap_sol_cqe, code) /
32] & CQE_CODE_MASK,
sol->dw[offsetof(struct amap_sol_cqe, cid) /
32] & CQE_CID_MASK);
+ }
iscsi_conn_failure(beiscsi_conn->conn,
ISCSI_ERR_CONN_FAILED);
break;
case CXN_KILLED_RST_SENT:
case CXN_KILLED_RST_RCVD:
- SE_DEBUG(DBG_LVL_1, "CQ Error %d, reset received/sent "
- "on CID 0x%x...\n",
+ if (ring_mode) {
+ SE_DEBUG(DBG_LVL_1, "CQ Error %d, reset"
+ "received/sent on CID 0x%x...\n",
+ sol->dw[offsetof(struct amap_sol_cqe, code) /
+ 32] & CQE_CODE_MASK, psgl_handle->cid);
+ } else {
+ SE_DEBUG(DBG_LVL_1, "CQ Error %d, reset"
+ "received/sent on CID 0x%x...\n",
sol->dw[offsetof(struct amap_sol_cqe, code) /
32] & CQE_CODE_MASK,
sol->dw[offsetof(struct amap_sol_cqe, cid) /
32] & CQE_CID_MASK);
+ }
iscsi_conn_failure(beiscsi_conn->conn,
ISCSI_ERR_CONN_FAILED);
break;
@@ -1344,8 +1599,7 @@
if (num_processed > 0) {
tot_nump += num_processed;
- hwi_ring_cq_db(phba, phwi_context->be_cq.id, num_processed,
- 1, 0);
+ hwi_ring_cq_db(phba, cq->id, num_processed, 1, 0);
}
return tot_nump;
}
@@ -1353,21 +1607,30 @@
static void beiscsi_process_all_cqs(struct work_struct *work)
{
unsigned long flags;
+ struct hwi_controller *phwi_ctrlr;
+ struct hwi_context_memory *phwi_context;
+ struct be_eq_obj *pbe_eq;
struct beiscsi_hba *phba =
container_of(work, struct beiscsi_hba, work_cqs);
+ phwi_ctrlr = phba->phwi_ctrlr;
+ phwi_context = phwi_ctrlr->phwi_ctxt;
+ if (phba->msix_enabled)
+ pbe_eq = &phwi_context->be_eq[phba->num_cpus];
+ else
+ pbe_eq = &phwi_context->be_eq[0];
+
if (phba->todo_mcc_cq) {
spin_lock_irqsave(&phba->isr_lock, flags);
phba->todo_mcc_cq = 0;
spin_unlock_irqrestore(&phba->isr_lock, flags);
- SE_DEBUG(DBG_LVL_1, "MCC Interrupt Not expected \n");
}
if (phba->todo_cq) {
spin_lock_irqsave(&phba->isr_lock, flags);
phba->todo_cq = 0;
spin_unlock_irqrestore(&phba->isr_lock, flags);
- beiscsi_process_cq(phba);
+ beiscsi_process_cq(pbe_eq);
}
}
@@ -1375,19 +1638,15 @@
{
static unsigned int ret;
struct beiscsi_hba *phba;
+ struct be_eq_obj *pbe_eq;
- phba = container_of(iop, struct beiscsi_hba, iopoll);
-
- ret = beiscsi_process_cq(phba);
+ pbe_eq = container_of(iop, struct be_eq_obj, iopoll);
+ ret = beiscsi_process_cq(pbe_eq);
if (ret < budget) {
- struct hwi_controller *phwi_ctrlr;
- struct hwi_context_memory *phwi_context;
-
- phwi_ctrlr = phba->phwi_ctrlr;
- phwi_context = phwi_ctrlr->phwi_ctxt;
+ phba = pbe_eq->phba;
blk_iopoll_complete(iop);
- hwi_ring_eq_db(phba, phwi_context->be_eq.q.id, 0,
- 0, 1, 1);
+ SE_DEBUG(DBG_LVL_8, "rearm pbe_eq->q.id =%d\n", pbe_eq->q.id);
+ hwi_ring_eq_db(phba, pbe_eq->q.id, 0, 0, 1, 1);
}
return ret;
}
@@ -1537,14 +1796,12 @@
static void beiscsi_find_mem_req(struct beiscsi_hba *phba)
{
- unsigned int num_cq_pages, num_eq_pages, num_async_pdu_buf_pages;
+ unsigned int num_cq_pages, num_async_pdu_buf_pages;
unsigned int num_async_pdu_data_pages, wrb_sz_per_cxn;
unsigned int num_async_pdu_buf_sgl_pages, num_async_pdu_data_sgl_pages;
num_cq_pages = PAGES_REQUIRED(phba->params.num_cq_entries * \
sizeof(struct sol_cqe));
- num_eq_pages = PAGES_REQUIRED(phba->params.num_eq_entries * \
- sizeof(struct be_eq_entry));
num_async_pdu_buf_pages =
PAGES_REQUIRED(phba->params.asyncpdus_per_ctrl * \
phba->params.defpdu_hdr_sz);
@@ -1565,8 +1822,6 @@
phba->mem_req[HWI_MEM_ADDN_CONTEXT] =
sizeof(struct hwi_context_memory);
- phba->mem_req[HWI_MEM_CQ] = num_cq_pages * PAGE_SIZE;
- phba->mem_req[HWI_MEM_EQ] = num_eq_pages * PAGE_SIZE;
phba->mem_req[HWI_MEM_WRB] = sizeof(struct iscsi_wrb)
* (phba->params.wrbs_per_cxn)
@@ -1751,8 +2006,6 @@
for (index = 0; index < phba->params.cxns_per_ctrl * 2; index += 2) {
pwrb_context = &phwi_ctrlr->wrb_context[index];
- SE_DEBUG(DBG_LVL_8, "cid=%d pwrb_context=%p \n", index,
- pwrb_context);
pwrb_context->pwrb_handle_base =
kzalloc(sizeof(struct wrb_handle *) *
phba->params.wrbs_per_cxn, GFP_KERNEL);
@@ -1767,6 +2020,7 @@
pwrb_context->pwrb_handle_basestd[j] =
pwrb_handle;
pwrb_context->wrb_handles_available++;
+ pwrb_handle->wrb_index = j;
pwrb_handle++;
}
pwrb_context->free_index = 0;
@@ -1785,6 +2039,7 @@
pwrb_context->pwrb_handle_basestd[j] =
pwrb_handle;
pwrb_context->wrb_handles_available++;
+ pwrb_handle->wrb_index = j;
pwrb_handle++;
}
pwrb_context->free_index = 0;
@@ -2042,79 +2297,126 @@
return 0;
}
-static int beiscsi_create_eq(struct beiscsi_hba *phba,
+static int beiscsi_create_eqs(struct beiscsi_hba *phba,
struct hwi_context_memory *phwi_context)
{
- unsigned int idx;
- int ret;
+ unsigned int i, num_eq_pages;
+ int ret, eq_for_mcc;
struct be_queue_info *eq;
struct be_dma_mem *mem;
- struct be_mem_descriptor *mem_descr;
void *eq_vaddress;
+ dma_addr_t paddr;
- idx = 0;
- eq = &phwi_context->be_eq.q;
- mem = &eq->dma_mem;
- mem_descr = phba->init_mem;
- mem_descr += HWI_MEM_EQ;
- eq_vaddress = mem_descr->mem_array[idx].virtual_address;
+ num_eq_pages = PAGES_REQUIRED(phba->params.num_eq_entries * \
+ sizeof(struct be_eq_entry));
- ret = be_fill_queue(eq, phba->params.num_eq_entries,
- sizeof(struct be_eq_entry), eq_vaddress);
- if (ret) {
- shost_printk(KERN_ERR, phba->shost,
- "be_fill_queue Failed for EQ \n");
- return ret;
+ if (phba->msix_enabled)
+ eq_for_mcc = 1;
+ else
+ eq_for_mcc = 0;
+ for (i = 0; i < (phba->num_cpus + eq_for_mcc); i++) {
+ eq = &phwi_context->be_eq[i].q;
+ mem = &eq->dma_mem;
+ phwi_context->be_eq[i].phba = phba;
+ eq_vaddress = pci_alloc_consistent(phba->pcidev,
+ num_eq_pages * PAGE_SIZE,
+ &paddr);
+ if (!eq_vaddress)
+ goto create_eq_error;
+
+ mem->va = eq_vaddress;
+ ret = be_fill_queue(eq, phba->params.num_eq_entries,
+ sizeof(struct be_eq_entry), eq_vaddress);
+ if (ret) {
+ shost_printk(KERN_ERR, phba->shost,
+ "be_fill_queue Failed for EQ \n");
+ goto create_eq_error;
+ }
+
+ mem->dma = paddr;
+ ret = beiscsi_cmd_eq_create(&phba->ctrl, eq,
+ phwi_context->cur_eqd);
+ if (ret) {
+ shost_printk(KERN_ERR, phba->shost,
+ "beiscsi_cmd_eq_create"
+ "Failedfor EQ \n");
+ goto create_eq_error;
+ }
+ SE_DEBUG(DBG_LVL_8, "eqid = %d\n", phwi_context->be_eq[i].q.id);
}
-
- mem->dma = mem_descr->mem_array[idx].bus_address.u.a64.address;
-
- ret = beiscsi_cmd_eq_create(&phba->ctrl, eq,
- phwi_context->be_eq.cur_eqd);
- if (ret) {
- shost_printk(KERN_ERR, phba->shost, "beiscsi_cmd_eq_create"
- "Failedfor EQ \n");
- return ret;
- }
- SE_DEBUG(DBG_LVL_8, "eq id is %d\n", phwi_context->be_eq.q.id);
return 0;
+create_eq_error:
+ for (i = 0; i < (phba->num_cpus + 1); i++) {
+ eq = &phwi_context->be_eq[i].q;
+ mem = &eq->dma_mem;
+ if (mem->va)
+ pci_free_consistent(phba->pcidev, num_eq_pages
+ * PAGE_SIZE,
+ mem->va, mem->dma);
+ }
+ return ret;
}
-static int beiscsi_create_cq(struct beiscsi_hba *phba,
+static int beiscsi_create_cqs(struct beiscsi_hba *phba,
struct hwi_context_memory *phwi_context)
{
- unsigned int idx;
+ unsigned int i, num_cq_pages;
int ret;
struct be_queue_info *cq, *eq;
struct be_dma_mem *mem;
- struct be_mem_descriptor *mem_descr;
+ struct be_eq_obj *pbe_eq;
void *cq_vaddress;
+ dma_addr_t paddr;
- idx = 0;
- cq = &phwi_context->be_cq;
- eq = &phwi_context->be_eq.q;
- mem = &cq->dma_mem;
- mem_descr = phba->init_mem;
- mem_descr += HWI_MEM_CQ;
- cq_vaddress = mem_descr->mem_array[idx].virtual_address;
- ret = be_fill_queue(cq, phba->params.icds_per_ctrl / 2,
- sizeof(struct sol_cqe), cq_vaddress);
- if (ret) {
- shost_printk(KERN_ERR, phba->shost,
- "be_fill_queue Failed for ISCSI CQ \n");
- return ret;
- }
+ num_cq_pages = PAGES_REQUIRED(phba->params.num_cq_entries * \
+ sizeof(struct sol_cqe));
- mem->dma = mem_descr->mem_array[idx].bus_address.u.a64.address;
- ret = beiscsi_cmd_cq_create(&phba->ctrl, cq, eq, false, false, 0);
- if (ret) {
- shost_printk(KERN_ERR, phba->shost,
- "beiscsi_cmd_eq_create Failed for ISCSI CQ \n");
- return ret;
+ for (i = 0; i < phba->num_cpus; i++) {
+ cq = &phwi_context->be_cq[i];
+ eq = &phwi_context->be_eq[i].q;
+ pbe_eq = &phwi_context->be_eq[i];
+ pbe_eq->cq = cq;
+ pbe_eq->phba = phba;
+ mem = &cq->dma_mem;
+ cq_vaddress = pci_alloc_consistent(phba->pcidev,
+ num_cq_pages * PAGE_SIZE,
+ &paddr);
+ if (!cq_vaddress)
+ goto create_cq_error;
+ ret = be_fill_queue(cq, phba->params.icds_per_ctrl / 2,
+ sizeof(struct sol_cqe), cq_vaddress);
+ if (ret) {
+ shost_printk(KERN_ERR, phba->shost,
+ "be_fill_queue Failed for ISCSI CQ \n");
+ goto create_cq_error;
+ }
+
+ mem->dma = paddr;
+ ret = beiscsi_cmd_cq_create(&phba->ctrl, cq, eq, false,
+ false, 0);
+ if (ret) {
+ shost_printk(KERN_ERR, phba->shost,
+ "beiscsi_cmd_eq_create"
+ "Failed for ISCSI CQ \n");
+ goto create_cq_error;
+ }
+ SE_DEBUG(DBG_LVL_8, "iscsi cq_id is %d for eq_id %d\n",
+ cq->id, eq->id);
+ SE_DEBUG(DBG_LVL_8, "ISCSI CQ CREATED\n");
}
- SE_DEBUG(DBG_LVL_8, "iscsi cq id is %d\n", phwi_context->be_cq.id);
- SE_DEBUG(DBG_LVL_8, "ISCSI CQ CREATED\n");
return 0;
+
+create_cq_error:
+ for (i = 0; i < phba->num_cpus; i++) {
+ cq = &phwi_context->be_cq[i];
+ mem = &cq->dma_mem;
+ if (mem->va)
+ pci_free_consistent(phba->pcidev, num_cq_pages
+ * PAGE_SIZE,
+ mem->va, mem->dma);
+ }
+ return ret;
+
}
static int
@@ -2132,7 +2434,7 @@
idx = 0;
dq = &phwi_context->be_def_hdrq;
- cq = &phwi_context->be_cq;
+ cq = &phwi_context->be_cq[0];
mem = &dq->dma_mem;
mem_descr = phba->init_mem;
mem_descr += HWI_MEM_ASYNC_HEADER_RING;
@@ -2176,7 +2478,7 @@
idx = 0;
dataq = &phwi_context->be_def_dataq;
- cq = &phwi_context->be_cq;
+ cq = &phwi_context->be_cq[0];
mem = &dataq->dma_mem;
mem_descr = phba->init_mem;
mem_descr += HWI_MEM_ASYNC_DATA_RING;
@@ -2239,6 +2541,30 @@
return 0;
}
+static void be_queue_free(struct beiscsi_hba *phba, struct be_queue_info *q)
+{
+ struct be_dma_mem *mem = &q->dma_mem;
+ if (mem->va)
+ pci_free_consistent(phba->pcidev, mem->size,
+ mem->va, mem->dma);
+}
+
+static int be_queue_alloc(struct beiscsi_hba *phba, struct be_queue_info *q,
+ u16 len, u16 entry_size)
+{
+ struct be_dma_mem *mem = &q->dma_mem;
+
+ memset(q, 0, sizeof(*q));
+ q->len = len;
+ q->entry_size = entry_size;
+ mem->size = len * entry_size;
+ mem->va = pci_alloc_consistent(phba->pcidev, mem->size, &mem->dma);
+ if (!mem->va)
+ return -1;
+ memset(mem->va, 0, mem->size);
+ return 0;
+}
+
static int
beiscsi_create_wrb_rings(struct beiscsi_hba *phba,
struct hwi_context_memory *phwi_context,
@@ -2328,13 +2654,29 @@
}
}
+static void be_mcc_queues_destroy(struct beiscsi_hba *phba)
+{
+ struct be_queue_info *q;
+ struct be_ctrl_info *ctrl = &phba->ctrl;
+
+ q = &phba->ctrl.mcc_obj.q;
+ if (q->created)
+ beiscsi_cmd_q_destroy(ctrl, q, QTYPE_MCCQ);
+ be_queue_free(phba, q);
+
+ q = &phba->ctrl.mcc_obj.cq;
+ if (q->created)
+ beiscsi_cmd_q_destroy(ctrl, q, QTYPE_CQ);
+ be_queue_free(phba, q);
+}
+
static void hwi_cleanup(struct beiscsi_hba *phba)
{
struct be_queue_info *q;
struct be_ctrl_info *ctrl = &phba->ctrl;
struct hwi_controller *phwi_ctrlr;
struct hwi_context_memory *phwi_context;
- int i;
+ int i, eq_num;
phwi_ctrlr = phba->phwi_ctrlr;
phwi_context = phwi_ctrlr->phwi_ctxt;
@@ -2343,7 +2685,6 @@
if (q->created)
beiscsi_cmd_q_destroy(ctrl, q, QTYPE_WRBQ);
}
-
free_wrb_handles(phba);
q = &phwi_context->be_def_hdrq;
@@ -2356,13 +2697,76 @@
beiscsi_cmd_q_destroy(ctrl, NULL, QTYPE_SGL);
- q = &phwi_context->be_cq;
- if (q->created)
- beiscsi_cmd_q_destroy(ctrl, q, QTYPE_CQ);
+ for (i = 0; i < (phba->num_cpus); i++) {
+ q = &phwi_context->be_cq[i];
+ if (q->created)
+ beiscsi_cmd_q_destroy(ctrl, q, QTYPE_CQ);
+ }
+ if (phba->msix_enabled)
+ eq_num = 1;
+ else
+ eq_num = 0;
+ for (i = 0; i < (phba->num_cpus + eq_num); i++) {
+ q = &phwi_context->be_eq[i].q;
+ if (q->created)
+ beiscsi_cmd_q_destroy(ctrl, q, QTYPE_EQ);
+ }
+ be_mcc_queues_destroy(phba);
+}
- q = &phwi_context->be_eq.q;
- if (q->created)
- beiscsi_cmd_q_destroy(ctrl, q, QTYPE_EQ);
+static int be_mcc_queues_create(struct beiscsi_hba *phba,
+ struct hwi_context_memory *phwi_context)
+{
+ struct be_queue_info *q, *cq;
+ struct be_ctrl_info *ctrl = &phba->ctrl;
+
+ /* Alloc MCC compl queue */
+ cq = &phba->ctrl.mcc_obj.cq;
+ if (be_queue_alloc(phba, cq, MCC_CQ_LEN,
+ sizeof(struct be_mcc_compl)))
+ goto err;
+ /* Ask BE to create MCC compl queue; */
+ if (phba->msix_enabled) {
+ if (beiscsi_cmd_cq_create(ctrl, cq, &phwi_context->be_eq
+ [phba->num_cpus].q, false, true, 0))
+ goto mcc_cq_free;
+ } else {
+ if (beiscsi_cmd_cq_create(ctrl, cq, &phwi_context->be_eq[0].q,
+ false, true, 0))
+ goto mcc_cq_free;
+ }
+
+ /* Alloc MCC queue */
+ q = &phba->ctrl.mcc_obj.q;
+ if (be_queue_alloc(phba, q, MCC_Q_LEN, sizeof(struct be_mcc_wrb)))
+ goto mcc_cq_destroy;
+
+ /* Ask BE to create MCC queue */
+ if (beiscsi_cmd_mccq_create(phba, q, cq))
+ goto mcc_q_free;
+
+ return 0;
+
+mcc_q_free:
+ be_queue_free(phba, q);
+mcc_cq_destroy:
+ beiscsi_cmd_q_destroy(ctrl, cq, QTYPE_CQ);
+mcc_cq_free:
+ be_queue_free(phba, cq);
+err:
+ return -1;
+}
+
+static int find_num_cpus(void)
+{
+ int num_cpus = 0;
+
+ num_cpus = num_online_cpus();
+ if (num_cpus >= MAX_CPUS)
+ num_cpus = MAX_CPUS - 1;
+
+ SE_DEBUG(DBG_LVL_8, "num_cpus = %d \n", num_cpus);
+ return num_cpus;
}
static int hwi_init_port(struct beiscsi_hba *phba)
@@ -2376,26 +2780,33 @@
def_pdu_ring_sz =
phba->params.asyncpdus_per_ctrl * sizeof(struct phys_addr);
phwi_ctrlr = phba->phwi_ctrlr;
-
phwi_context = phwi_ctrlr->phwi_ctxt;
- phwi_context->be_eq.max_eqd = 0;
- phwi_context->be_eq.min_eqd = 0;
- phwi_context->be_eq.cur_eqd = 64;
- phwi_context->be_eq.enable_aic = false;
+ phwi_context->max_eqd = 0;
+ phwi_context->min_eqd = 0;
+ phwi_context->cur_eqd = 64;
be_cmd_fw_initialize(&phba->ctrl);
- status = beiscsi_create_eq(phba, phwi_context);
+
+ status = beiscsi_create_eqs(phba, phwi_context);
if (status != 0) {
shost_printk(KERN_ERR, phba->shost, "EQ not created \n");
goto error;
}
- status = mgmt_check_supported_fw(ctrl);
+ status = be_mcc_queues_create(phba, phwi_context);
+ if (status != 0)
+ goto error;
+
+ status = mgmt_check_supported_fw(ctrl, phba);
if (status != 0) {
shost_printk(KERN_ERR, phba->shost,
"Unsupported fw version \n");
goto error;
}
+ if (phba->fw_config.iscsi_features == 0x1)
+ ring_mode = 1;
+ else
+ ring_mode = 0;
status = mgmt_get_fw_config(ctrl, phba);
if (status != 0) {
shost_printk(KERN_ERR, phba->shost,
@@ -2403,7 +2814,7 @@
goto error;
}
- status = beiscsi_create_cq(phba, phwi_context);
+ status = beiscsi_create_cqs(phba, phwi_context);
if (status != 0) {
shost_printk(KERN_ERR, phba->shost, "CQ not created\n");
goto error;
@@ -2447,7 +2858,6 @@
return -ENOMEM;
}
-
static int hwi_init_controller(struct beiscsi_hba *phba)
{
struct hwi_controller *phwi_ctrlr;
@@ -2530,6 +2940,18 @@
phba->io_sgl_hndl_avbl = 0;
phba->eh_sgl_hndl_avbl = 0;
+
+ if (ring_mode) {
+ phba->sgl_hndl_array = kzalloc(sizeof(struct sgl_handle *) *
+ phba->params.icds_per_ctrl,
+ GFP_KERNEL);
+ if (!phba->sgl_hndl_array) {
+ shost_printk(KERN_ERR, phba->shost,
+ "Mem Alloc Failed. Failing to load\n");
+ return -ENOMEM;
+ }
+ }
+
mem_descr_sglh = phba->init_mem;
mem_descr_sglh += HWI_MEM_SGLH;
if (1 == mem_descr_sglh->num_elements) {
@@ -2537,6 +2959,8 @@
phba->params.ios_per_ctrl,
GFP_KERNEL);
if (!phba->io_sgl_hndl_base) {
+ if (ring_mode)
+ kfree(phba->sgl_hndl_array);
shost_printk(KERN_ERR, phba->shost,
"Mem Alloc Failed. Failing to load\n");
return -ENOMEM;
@@ -2656,13 +3080,12 @@
struct hwi_context_memory *phwi_context;
struct be_queue_info *eq;
u8 __iomem *addr;
- u32 reg;
+ u32 reg, i;
u32 enabled;
phwi_ctrlr = phba->phwi_ctrlr;
phwi_context = phwi_ctrlr->phwi_ctxt;
- eq = &phwi_context->be_eq.q;
addr = (u8 __iomem *) ((u8 __iomem *) ctrl->pcicfg +
PCICFG_MEMBAR_CTRL_INT_CTRL_OFFSET);
reg = ioread32(addr);
@@ -2673,9 +3096,11 @@
reg |= MEMBAR_CTRL_INT_CTRL_HOSTINTR_MASK;
SE_DEBUG(DBG_LVL_8, "reg =x%08x addr=%p \n", reg, addr);
iowrite32(reg, addr);
- SE_DEBUG(DBG_LVL_8, "eq->id=%d \n", eq->id);
-
- hwi_ring_eq_db(phba, eq->id, 0, 0, 1, 1);
+ for (i = 0; i <= phba->num_cpus; i++) {
+ eq = &phwi_context->be_eq[i].q;
+ SE_DEBUG(DBG_LVL_8, "eq->id=%d \n", eq->id);
+ hwi_ring_eq_db(phba, eq->id, 0, 0, 1, 1);
+ }
} else
shost_printk(KERN_WARNING, phba->shost,
"In hwi_enable_intr, Not Enabled \n");
@@ -2720,6 +3145,8 @@
if (hba_setup_cid_tbls(phba)) {
shost_printk(KERN_ERR, phba->shost,
"Failed in hba_setup_cid_tbls\n");
+ if (ring_mode)
+ kfree(phba->sgl_hndl_array);
kfree(phba->io_sgl_hndl_base);
kfree(phba->eh_sgl_hndl_base);
goto do_cleanup_ctrlr;
@@ -2738,17 +3165,25 @@
struct hwi_context_memory *phwi_context;
struct be_queue_info *eq;
struct be_eq_entry *eqe = NULL;
+ int i, eq_msix;
phwi_ctrlr = phba->phwi_ctrlr;
phwi_context = phwi_ctrlr->phwi_ctxt;
- eq = &phwi_context->be_eq.q;
- eqe = queue_tail_node(eq);
+ if (phba->msix_enabled)
+ eq_msix = 1;
+ else
+ eq_msix = 0;
- while (eqe->dw[offsetof(struct amap_eq_entry, valid) / 32]
- & EQE_VALID_MASK) {
- AMAP_SET_BITS(struct amap_eq_entry, valid, eqe, 0);
- queue_tail_inc(eq);
+ for (i = 0; i < (phba->num_cpus + eq_msix); i++) {
+ eq = &phwi_context->be_eq[i].q;
eqe = queue_tail_node(eq);
+
+ while (eqe->dw[offsetof(struct amap_eq_entry, valid) / 32]
+ & EQE_VALID_MASK) {
+ AMAP_SET_BITS(struct amap_eq_entry, valid, eqe, 0);
+ queue_tail_inc(eq);
+ eqe = queue_tail_node(eq);
+ }
}
}
@@ -2762,6 +3197,8 @@
"mgmt_epfw_cleanup FAILED \n");
hwi_cleanup(phba);
hwi_purge_eq(phba);
+ if (ring_mode)
+ kfree(phba->sgl_hndl_array);
kfree(phba->io_sgl_hndl_base);
kfree(phba->eh_sgl_hndl_base);
kfree(phba->cid_array);
@@ -2846,8 +3283,9 @@
be_dws_le_to_cpu(pwrb, sizeof(struct iscsi_target_context_update_wrb));
doorbell |= beiscsi_conn->beiscsi_conn_cid & DB_WRB_POST_CID_MASK;
- doorbell |= (pwrb_handle->wrb_index & DB_DEF_PDU_WRB_INDEX_MASK) <<
- DB_DEF_PDU_WRB_INDEX_SHIFT;
+ if (!ring_mode)
+ doorbell |= (pwrb_handle->wrb_index & DB_DEF_PDU_WRB_INDEX_MASK)
+ << DB_DEF_PDU_WRB_INDEX_SHIFT;
doorbell |= 1 << DB_DEF_PDU_NUM_POSTED_SHIFT;
iowrite32(doorbell, phba->db_va + DB_TXULP0_OFFSET);
@@ -2856,7 +3294,7 @@
static void beiscsi_parse_pdu(struct iscsi_conn *conn, itt_t itt,
int *index, int *age)
{
- *index = be32_to_cpu(itt) >> 16;
+ *index = (int)itt;
if (age)
*age = conn->session->age;
}
@@ -2885,15 +3323,13 @@
io_task->cmd_bhs = pci_pool_alloc(beiscsi_sess->bhs_pool,
GFP_KERNEL, &paddr);
-
if (!io_task->cmd_bhs)
return -ENOMEM;
-
io_task->bhs_pa.u.a64.address = paddr;
+ io_task->libiscsi_itt = (itt_t)task->itt;
io_task->pwrb_handle = alloc_wrb_handle(phba,
beiscsi_conn->beiscsi_conn_cid,
task->itt);
- io_task->pwrb_handle->pio_handle = task;
io_task->conn = beiscsi_conn;
task->hdr = (struct iscsi_hdr *)&io_task->cmd_bhs->iscsi_hdr;
@@ -2905,7 +3341,6 @@
spin_unlock(&phba->io_sgl_lock);
if (!io_task->psgl_handle)
goto free_hndls;
-
} else {
io_task->scsi_cmnd = NULL;
if ((task->hdr->opcode & ISCSI_OPCODE_MASK) == ISCSI_OP_LOGIN) {
@@ -2932,8 +3367,18 @@
goto free_hndls;
}
}
- itt = (itt_t) cpu_to_be32(((unsigned int)task->itt << 16) |
- (unsigned int)(io_task->psgl_handle->sgl_index));
+ itt = (itt_t) cpu_to_be32(((unsigned int)io_task->pwrb_handle->
+ wrb_index << 16) | (unsigned int)
+ (io_task->psgl_handle->sgl_index));
+ if (ring_mode) {
+ phba->sgl_hndl_array[io_task->psgl_handle->sgl_index -
+ phba->fw_config.iscsi_cid_start] =
+ io_task->psgl_handle;
+ io_task->psgl_handle->task = task;
+ io_task->psgl_handle->cid = beiscsi_conn->beiscsi_conn_cid;
+ } else
+ io_task->pwrb_handle->pio_handle = task;
+
io_task->cmd_bhs->iscsi_hdr.itt = itt;
return 0;
@@ -3006,7 +3451,6 @@
io_task->bhs_len = sizeof(struct be_cmd_bhs);
if (writedir) {
- SE_DEBUG(DBG_LVL_4, " WRITE Command \t");
memset(&io_task->cmd_bhs->iscsi_data_pdu, 0, 48);
AMAP_SET_BITS(struct amap_pdu_data_out, itt,
&io_task->cmd_bhs->iscsi_data_pdu,
@@ -3016,11 +3460,18 @@
ISCSI_OPCODE_SCSI_DATA_OUT);
AMAP_SET_BITS(struct amap_pdu_data_out, final_bit,
&io_task->cmd_bhs->iscsi_data_pdu, 1);
- AMAP_SET_BITS(struct amap_iscsi_wrb, type, pwrb, INI_WR_CMD);
+ if (ring_mode)
+ io_task->psgl_handle->type = INI_WR_CMD;
+ else
+ AMAP_SET_BITS(struct amap_iscsi_wrb, type, pwrb,
+ INI_WR_CMD);
AMAP_SET_BITS(struct amap_iscsi_wrb, dsp, pwrb, 1);
} else {
- SE_DEBUG(DBG_LVL_4, "READ Command \t");
- AMAP_SET_BITS(struct amap_iscsi_wrb, type, pwrb, INI_RD_CMD);
+ if (ring_mode)
+ io_task->psgl_handle->type = INI_RD_CMD;
+ else
+ AMAP_SET_BITS(struct amap_iscsi_wrb, type, pwrb,
+ INI_RD_CMD);
AMAP_SET_BITS(struct amap_iscsi_wrb, dsp, pwrb, 0);
}
memcpy(&io_task->cmd_bhs->iscsi_data_pdu.
@@ -3045,7 +3496,8 @@
be_dws_le_to_cpu(pwrb, sizeof(struct iscsi_wrb));
doorbell |= beiscsi_conn->beiscsi_conn_cid & DB_WRB_POST_CID_MASK;
- doorbell |= (io_task->pwrb_handle->wrb_index &
+ if (!ring_mode)
+ doorbell |= (io_task->pwrb_handle->wrb_index &
DB_DEF_PDU_WRB_INDEX_MASK) << DB_DEF_PDU_WRB_INDEX_SHIFT;
doorbell |= 1 << DB_DEF_PDU_NUM_POSTED_SHIFT;
@@ -3059,10 +3511,16 @@
struct iscsi_conn *conn = task->conn;
struct beiscsi_conn *beiscsi_conn = conn->dd_data;
struct beiscsi_hba *phba = beiscsi_conn->phba;
+ struct iscsi_session *session;
struct iscsi_wrb *pwrb = NULL;
+ struct hwi_controller *phwi_ctrlr;
+ struct hwi_wrb_context *pwrb_context;
+ struct wrb_handle *pwrb_handle;
unsigned int doorbell = 0;
+ unsigned int i, cid;
struct iscsi_task *aborted_task;
+ cid = beiscsi_conn->beiscsi_conn_cid;
pwrb = io_task->pwrb_handle->pwrb;
AMAP_SET_BITS(struct amap_iscsi_wrb, cmdsn_itt, pwrb,
be32_to_cpu(task->cmdsn));
@@ -3073,38 +3531,63 @@
switch (task->hdr->opcode & ISCSI_OPCODE_MASK) {
case ISCSI_OP_LOGIN:
- AMAP_SET_BITS(struct amap_iscsi_wrb, type, pwrb, TGT_DM_CMD);
+ if (ring_mode)
+ io_task->psgl_handle->type = TGT_DM_CMD;
+ else
+ AMAP_SET_BITS(struct amap_iscsi_wrb, type, pwrb,
+ TGT_DM_CMD);
AMAP_SET_BITS(struct amap_iscsi_wrb, dmsg, pwrb, 0);
AMAP_SET_BITS(struct amap_iscsi_wrb, cmdsn_itt, pwrb, 1);
hwi_write_buffer(pwrb, task);
break;
case ISCSI_OP_NOOP_OUT:
- AMAP_SET_BITS(struct amap_iscsi_wrb, type, pwrb, INI_RD_CMD);
+ if (ring_mode)
+ io_task->psgl_handle->type = INI_RD_CMD;
+ else
+ AMAP_SET_BITS(struct amap_iscsi_wrb, type, pwrb,
+ INI_RD_CMD);
hwi_write_buffer(pwrb, task);
break;
case ISCSI_OP_TEXT:
- AMAP_SET_BITS(struct amap_iscsi_wrb, type, pwrb, INI_WR_CMD);
+ if (ring_mode)
+ io_task->psgl_handle->type = INI_WR_CMD;
+ else
+ AMAP_SET_BITS(struct amap_iscsi_wrb, type, pwrb,
+ INI_WR_CMD);
AMAP_SET_BITS(struct amap_iscsi_wrb, dsp, pwrb, 1);
hwi_write_buffer(pwrb, task);
break;
case ISCSI_OP_SCSI_TMFUNC:
- aborted_task = iscsi_itt_to_task(conn,
- ((struct iscsi_tm *)task->hdr)->rtt);
+ session = conn->session;
+ i = ((struct iscsi_tm *)task->hdr)->rtt;
+ phwi_ctrlr = phba->phwi_ctrlr;
+ pwrb_context = &phwi_ctrlr->wrb_context[cid];
+ pwrb_handle = pwrb_context->pwrb_handle_basestd[be32_to_cpu(i)
+ >> 16];
+ aborted_task = pwrb_handle->pio_handle;
if (!aborted_task)
return 0;
+
aborted_io_task = aborted_task->dd_data;
if (!aborted_io_task->scsi_cmnd)
return 0;
mgmt_invalidate_icds(phba,
aborted_io_task->psgl_handle->sgl_index,
- beiscsi_conn->beiscsi_conn_cid);
- AMAP_SET_BITS(struct amap_iscsi_wrb, type, pwrb, INI_TMF_CMD);
+ cid);
+ if (ring_mode)
+ io_task->psgl_handle->type = INI_TMF_CMD;
+ else
+ AMAP_SET_BITS(struct amap_iscsi_wrb, type, pwrb,
+ INI_TMF_CMD);
AMAP_SET_BITS(struct amap_iscsi_wrb, dmsg, pwrb, 0);
hwi_write_buffer(pwrb, task);
break;
case ISCSI_OP_LOGOUT:
AMAP_SET_BITS(struct amap_iscsi_wrb, dmsg, pwrb, 0);
+ if (ring_mode)
+ io_task->psgl_handle->type = HWH_TYPE_LOGOUT;
+ else
AMAP_SET_BITS(struct amap_iscsi_wrb, type, pwrb,
HWH_TYPE_LOGOUT);
hwi_write_buffer(pwrb, task);
@@ -3122,8 +3605,9 @@
io_task->pwrb_handle->nxt_wrb_index);
be_dws_le_to_cpu(pwrb, sizeof(struct iscsi_wrb));
- doorbell |= beiscsi_conn->beiscsi_conn_cid & DB_WRB_POST_CID_MASK;
- doorbell |= (io_task->pwrb_handle->wrb_index &
+ doorbell |= cid & DB_WRB_POST_CID_MASK;
+ if (!ring_mode)
+ doorbell |= (io_task->pwrb_handle->wrb_index &
DB_DEF_PDU_WRB_INDEX_MASK) << DB_DEF_PDU_WRB_INDEX_SHIFT;
doorbell |= 1 << DB_DEF_PDU_NUM_POSTED_SHIFT;
iowrite32(doorbell, phba->db_va + DB_TXULP0_OFFSET);
@@ -3165,9 +3649,14 @@
return beiscsi_iotask(task, sg, num_sg, xferlen, writedir);
}
+
static void beiscsi_remove(struct pci_dev *pcidev)
{
struct beiscsi_hba *phba = NULL;
+ struct hwi_controller *phwi_ctrlr;
+ struct hwi_context_memory *phwi_context;
+ struct be_eq_obj *pbe_eq;
+ unsigned int i, msix_vec;
phba = (struct beiscsi_hba *)pci_get_drvdata(pcidev);
if (!phba) {
@@ -3175,12 +3664,24 @@
return;
}
+ phwi_ctrlr = phba->phwi_ctrlr;
+ phwi_context = phwi_ctrlr->phwi_ctxt;
hwi_disable_intr(phba);
- if (phba->pcidev->irq)
- free_irq(phba->pcidev->irq, phba);
+ if (phba->msix_enabled) {
+ for (i = 0; i <= phba->num_cpus; i++) {
+ msix_vec = phba->msix_entries[i].vector;
+ free_irq(msix_vec, &phwi_context->be_eq[i]);
+ }
+ } else
+ if (phba->pcidev->irq)
+ free_irq(phba->pcidev->irq, phba);
+ pci_disable_msix(phba->pcidev);
destroy_workqueue(phba->wq);
if (blk_iopoll_enabled)
- blk_iopoll_disable(&phba->iopoll);
+ for (i = 0; i < phba->num_cpus; i++) {
+ pbe_eq = &phwi_context->be_eq[i];
+ blk_iopoll_disable(&pbe_eq->iopoll);
+ }
beiscsi_clean_port(phba);
beiscsi_free_mem(phba);
@@ -3194,11 +3695,29 @@
iscsi_host_free(phba->shost);
}
+static void beiscsi_msix_enable(struct beiscsi_hba *phba)
+{
+ int i, status;
+
+ for (i = 0; i <= phba->num_cpus; i++)
+ phba->msix_entries[i].entry = i;
+
+ status = pci_enable_msix(phba->pcidev, phba->msix_entries,
+ (phba->num_cpus + 1));
+ if (!status)
+ phba->msix_enabled = true;
+
+ return;
+}
+
static int __devinit beiscsi_dev_probe(struct pci_dev *pcidev,
const struct pci_device_id *id)
{
struct beiscsi_hba *phba = NULL;
- int ret;
+ struct hwi_controller *phwi_ctrlr;
+ struct hwi_context_memory *phwi_context;
+ struct be_eq_obj *pbe_eq;
+ int ret, msix_vec, num_cpus, i;
ret = beiscsi_enable_pci(pcidev);
if (ret < 0) {
@@ -3213,8 +3732,18 @@
" Failed in beiscsi_hba_alloc \n");
goto disable_pci;
}
+ SE_DEBUG(DBG_LVL_8, " phba = %p \n", phba);
pci_set_drvdata(pcidev, phba);
+ if (enable_msix)
+ num_cpus = find_num_cpus();
+ else
+ num_cpus = 1;
+ phba->num_cpus = num_cpus;
+ SE_DEBUG(DBG_LVL_8, "num_cpus = %d \n", phba->num_cpus);
+
+ if (enable_msix)
+ beiscsi_msix_enable(phba);
ret = be_ctrl_init(phba, pcidev);
if (ret) {
shost_printk(KERN_ERR, phba->shost, "beiscsi_dev_probe-"
@@ -3235,7 +3764,7 @@
snprintf(phba->wq_name, sizeof(phba->wq_name), "beiscsi_q_irq%u",
phba->shost->host_no);
- phba->wq = create_singlethread_workqueue(phba->wq_name);
+ phba->wq = create_workqueue(phba->wq_name);
if (!phba->wq) {
shost_printk(KERN_ERR, phba->shost, "beiscsi_dev_probe-"
"Failed to allocate work queue\n");
@@ -3244,11 +3773,16 @@
INIT_WORK(&phba->work_cqs, beiscsi_process_all_cqs);
+ phwi_ctrlr = phba->phwi_ctrlr;
+ phwi_context = phwi_ctrlr->phwi_ctxt;
if (blk_iopoll_enabled) {
- blk_iopoll_init(&phba->iopoll, be_iopoll_budget, be_iopoll);
- blk_iopoll_enable(&phba->iopoll);
+ for (i = 0; i < phba->num_cpus; i++) {
+ pbe_eq = &phwi_context->be_eq[i];
+ blk_iopoll_init(&pbe_eq->iopoll, be_iopoll_budget,
+ be_iopoll);
+ blk_iopoll_enable(&pbe_eq->iopoll);
+ }
}
-
ret = beiscsi_init_irqs(phba);
if (ret < 0) {
shost_printk(KERN_ERR, phba->shost, "beiscsi_dev_probe-"
@@ -3261,17 +3795,26 @@
"Failed to hwi_enable_intr\n");
goto free_ctrlr;
}
-
SE_DEBUG(DBG_LVL_8, "\n\n\n SUCCESS - DRIVER LOADED \n\n\n");
return 0;
free_ctrlr:
- if (phba->pcidev->irq)
- free_irq(phba->pcidev->irq, phba);
+ if (phba->msix_enabled) {
+ for (i = 0; i <= phba->num_cpus; i++) {
+ msix_vec = phba->msix_entries[i].vector;
+ free_irq(msix_vec, &phwi_context->be_eq[i]);
+ }
+ } else
+ if (phba->pcidev->irq)
+ free_irq(phba->pcidev->irq, phba);
+ pci_disable_msix(phba->pcidev);
free_blkenbld:
destroy_workqueue(phba->wq);
if (blk_iopoll_enabled)
- blk_iopoll_disable(&phba->iopoll);
+ for (i = 0; i < phba->num_cpus; i++) {
+ pbe_eq = &phwi_context->be_eq[i];
+ blk_iopoll_disable(&pbe_eq->iopoll);
+ }
free_twq:
beiscsi_clean_port(phba);
beiscsi_free_mem(phba);
@@ -3316,7 +3859,7 @@
ISCSI_USERNAME | ISCSI_PASSWORD |
ISCSI_USERNAME_IN | ISCSI_PASSWORD_IN |
ISCSI_FAST_ABORT | ISCSI_ABORT_TMO |
- ISCSI_LU_RESET_TMO |
+ ISCSI_LU_RESET_TMO | ISCSI_TGT_RESET_TMO |
ISCSI_PING_TMO | ISCSI_RECV_TMO |
ISCSI_IFACE_NAME | ISCSI_INITIATOR_NAME,
.host_param_mask = ISCSI_HOST_HWADDRESS | ISCSI_HOST_IPADDRESS |
@@ -3351,6 +3894,7 @@
.id_table = beiscsi_pci_id_table
};
+
static int __init beiscsi_module_init(void)
{
int ret;
@@ -3373,6 +3917,7 @@
"beiscsi pci driver.\n");
goto unregister_iscsi_transport;
}
+ ring_mode = 0;
return 0;
unregister_iscsi_transport:
diff --git a/drivers/scsi/be2iscsi/be_main.h b/drivers/scsi/be2iscsi/be_main.h
index 53c9b70..25e6b20 100644
--- a/drivers/scsi/be2iscsi/be_main.h
+++ b/drivers/scsi/be2iscsi/be_main.h
@@ -21,11 +21,9 @@
#ifndef _BEISCSI_MAIN_
#define _BEISCSI_MAIN_
-
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/in.h>
-#include <linux/blk-iopoll.h>
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_device.h>
@@ -35,12 +33,8 @@
#include <scsi/scsi_transport_iscsi.h>
#include "be.h"
-
-
-
#define DRV_NAME "be2iscsi"
#define BUILD_STR "2.0.527.0"
-
#define BE_NAME "ServerEngines BladeEngine2" \
"Linux iSCSI Driver version" BUILD_STR
#define DRV_DESC BE_NAME " " "Driver"
@@ -49,6 +43,8 @@
#define BE_DEVICE_ID1 0x212
#define OC_DEVICE_ID1 0x702
#define OC_DEVICE_ID2 0x703
+#define OC_DEVICE_ID3 0x712
+#define OC_DEVICE_ID4 0x222
#define BE2_MAX_SESSIONS 64
#define BE2_CMDS_PER_CXN 128
@@ -63,6 +59,7 @@
#define BE2_IO_DEPTH \
(BE2_MAX_ICDS / 2 - (BE2_LOGOUTS + BE2_TMFS + BE2_NOPOUT_REQ))
+#define MAX_CPUS 31
#define BEISCSI_SGLIST_ELEMENTS BE2_SGE
#define BEISCSI_MAX_CMNDS 1024 /* Max IO's per Ctrlr sht->can_queue */
@@ -79,7 +76,7 @@
#define BE_SENSE_INFO_SIZE 258
#define BE_ISCSI_PDU_HEADER_SIZE 64
#define BE_MIN_MEM_SIZE 16384
-
+#define MAX_CMD_SZ 65536
#define IIOC_SCSI_DATA 0x05 /* Write Operation */
#define DBG_LVL 0x00000001
@@ -100,6 +97,8 @@
} \
} while (0);
+#define BE_ADAPTER_UP 0x00000000
+#define BE_ADAPTER_LINK_DOWN 0x00000001
/**
* hardware needs the async PDU buffers to be posted in multiples of 8
* So have atleast 8 of them by default
@@ -160,21 +159,19 @@
enum be_mem_enum {
HWI_MEM_ADDN_CONTEXT,
- HWI_MEM_CQ,
- HWI_MEM_EQ,
HWI_MEM_WRB,
HWI_MEM_WRBH,
- HWI_MEM_SGLH, /* 5 */
+ HWI_MEM_SGLH,
HWI_MEM_SGE,
- HWI_MEM_ASYNC_HEADER_BUF,
+ HWI_MEM_ASYNC_HEADER_BUF, /* 5 */
HWI_MEM_ASYNC_DATA_BUF,
HWI_MEM_ASYNC_HEADER_RING,
- HWI_MEM_ASYNC_DATA_RING, /* 10 */
+ HWI_MEM_ASYNC_DATA_RING,
HWI_MEM_ASYNC_HEADER_HANDLE,
- HWI_MEM_ASYNC_DATA_HANDLE,
+ HWI_MEM_ASYNC_DATA_HANDLE, /* 10 */
HWI_MEM_ASYNC_PDU_CONTEXT,
ISCSI_MEM_GLOBAL_HEADER,
- SE_MEM_MAX /* 15 */
+ SE_MEM_MAX
};
struct be_bus_address32 {
@@ -212,6 +209,9 @@
struct sgl_handle {
unsigned int sgl_index;
+ unsigned int type;
+ unsigned int cid;
+ struct iscsi_task *task;
struct iscsi_sge *pfrag;
};
@@ -274,13 +274,17 @@
struct pci_dev *pcidev;
unsigned int state;
unsigned short asic_revision;
- struct blk_iopoll iopoll;
+ unsigned int num_cpus;
+ unsigned int nxt_cqid;
+ struct msix_entry msix_entries[MAX_CPUS + 1];
+ bool msix_enabled;
struct be_mem_descriptor *init_mem;
unsigned short io_sgl_alloc_index;
unsigned short io_sgl_free_index;
unsigned short io_sgl_hndl_avbl;
struct sgl_handle **io_sgl_hndl_base;
+ struct sgl_handle **sgl_hndl_array;
unsigned short eh_sgl_alloc_index;
unsigned short eh_sgl_free_index;
@@ -315,6 +319,7 @@
unsigned short cid_alloc;
unsigned short cid_free;
unsigned short avlbl_cids;
+ unsigned short iscsi_features;
spinlock_t cid_lock;
} fw_config;
@@ -343,6 +348,7 @@
unsigned short login_in_progress;
struct sgl_handle *plogin_sgl_handle;
struct beiscsi_session *beiscsi_sess;
+ struct iscsi_task *task;
};
/* This structure is used by the chip */
@@ -390,7 +396,7 @@
unsigned int flags;
unsigned short cid;
unsigned short header_len;
-
+ itt_t libiscsi_itt;
struct be_cmd_bhs *cmd_bhs;
struct be_bus_address bhs_pa;
unsigned short bhs_len;
@@ -599,7 +605,6 @@
void beiscsi_process_eq(struct beiscsi_hba *phba);
-
struct iscsi_wrb {
u32 dw[16];
} __packed;
@@ -820,10 +825,12 @@
};
struct hwi_context_memory {
- struct be_eq_obj be_eq;
- struct be_queue_info be_cq;
- struct be_queue_info be_mcc_cq;
- struct be_queue_info be_mcc;
+ /* Adaptive interrupt coalescing (AIC) info */
+ u16 min_eqd; /* in usecs */
+ u16 max_eqd; /* in usecs */
+ u16 cur_eqd; /* in usecs */
+ struct be_eq_obj be_eq[MAX_CPUS];
+ struct be_queue_info be_cq[MAX_CPUS];
struct be_queue_info be_def_hdrq;
struct be_queue_info be_def_dataq;
diff --git a/drivers/scsi/be2iscsi/be_mgmt.c b/drivers/scsi/be2iscsi/be_mgmt.c
index 12e644f..79c2bd5 100644
--- a/drivers/scsi/be2iscsi/be_mgmt.c
+++ b/drivers/scsi/be2iscsi/be_mgmt.c
@@ -35,7 +35,6 @@
be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
OPCODE_COMMON_QUERY_FIRMWARE_CONFIG, sizeof(*req));
-
status = be_mbox_notify(ctrl);
if (!status) {
struct be_fw_cfg *pfw_cfg;
@@ -58,7 +57,8 @@
return status;
}
-unsigned char mgmt_check_supported_fw(struct be_ctrl_info *ctrl)
+unsigned char mgmt_check_supported_fw(struct be_ctrl_info *ctrl,
+ struct beiscsi_hba *phba)
{
struct be_dma_mem nonemb_cmd;
struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
@@ -85,7 +85,6 @@
sge->pa_hi = cpu_to_le32(upper_32_bits(nonemb_cmd.dma));
sge->pa_lo = cpu_to_le32(nonemb_cmd.dma & 0xFFFFFFFF);
sge->len = cpu_to_le32(nonemb_cmd.size);
-
status = be_mbox_notify(ctrl);
if (!status) {
struct be_mgmt_controller_attributes_resp *resp = nonemb_cmd.va;
@@ -95,21 +94,25 @@
resp->params.hba_attribs.firmware_version_string);
SE_DEBUG(DBG_LVL_8,
"Developer Build, not performing version check...\n");
-
+ phba->fw_config.iscsi_features =
+ resp->params.hba_attribs.iscsi_features;
+ SE_DEBUG(DBG_LVL_8, " phba->fw_config.iscsi_features = %d\n",
+ phba->fw_config.iscsi_features);
} else
SE_DEBUG(DBG_LVL_1, " Failed in mgmt_check_supported_fw\n");
+ spin_unlock(&ctrl->mbox_lock);
if (nonemb_cmd.va)
pci_free_consistent(ctrl->pdev, nonemb_cmd.size,
nonemb_cmd.va, nonemb_cmd.dma);
- spin_unlock(&ctrl->mbox_lock);
return status;
}
+
unsigned char mgmt_epfw_cleanup(struct beiscsi_hba *phba, unsigned short chute)
{
struct be_ctrl_info *ctrl = &phba->ctrl;
- struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+ struct be_mcc_wrb *wrb = wrb_from_mccq(phba);
struct iscsi_cleanup_req *req = embedded_payload(wrb);
int status = 0;
@@ -124,7 +127,7 @@
req->hdr_ring_id = 0;
req->data_ring_id = 0;
- status = be_mbox_notify(ctrl);
+ status = be_mcc_notify_wait(phba);
if (status)
shost_printk(KERN_WARNING, phba->shost,
" mgmt_epfw_cleanup , FAILED\n");
@@ -137,7 +140,7 @@
{
struct be_dma_mem nonemb_cmd;
struct be_ctrl_info *ctrl = &phba->ctrl;
- struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+ struct be_mcc_wrb *wrb = wrb_from_mccq(phba);
struct be_sge *sge = nonembedded_sgl(wrb);
struct invalidate_commands_params_in *req;
int status = 0;
@@ -169,7 +172,7 @@
sge->pa_lo = cpu_to_le32(nonemb_cmd.dma & 0xFFFFFFFF);
sge->len = cpu_to_le32(nonemb_cmd.size);
- status = be_mbox_notify(ctrl);
+ status = be_mcc_notify_wait(phba);
if (status)
SE_DEBUG(DBG_LVL_1, "ICDS Invalidation Failed\n");
spin_unlock(&ctrl->mbox_lock);
@@ -186,7 +189,7 @@
unsigned short savecfg_flag)
{
struct be_ctrl_info *ctrl = &phba->ctrl;
- struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+ struct be_mcc_wrb *wrb = wrb_from_mccq(phba);
struct iscsi_invalidate_connection_params_in *req =
embedded_payload(wrb);
int status = 0;
@@ -205,7 +208,7 @@
else
req->cleanup_type = CMD_ISCSI_CONNECTION_INVALIDATE;
req->save_cfg = savecfg_flag;
- status = be_mbox_notify(ctrl);
+ status = be_mcc_notify_wait(phba);
if (status)
SE_DEBUG(DBG_LVL_1, "Invalidation Failed\n");
@@ -217,7 +220,7 @@
unsigned short cid, unsigned int upload_flag)
{
struct be_ctrl_info *ctrl = &phba->ctrl;
- struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+ struct be_mcc_wrb *wrb = wrb_from_mccq(phba);
struct tcp_upload_params_in *req = embedded_payload(wrb);
int status = 0;
@@ -229,7 +232,7 @@
OPCODE_COMMON_TCP_UPLOAD, sizeof(*req));
req->id = (unsigned short)cid;
req->upload_type = (unsigned char)upload_flag;
- status = be_mbox_notify(ctrl);
+ status = be_mcc_notify_wait(phba);
if (status)
SE_DEBUG(DBG_LVL_1, "mgmt_upload_connection Failed\n");
spin_unlock(&ctrl->mbox_lock);
@@ -245,13 +248,14 @@
struct sockaddr_in *daddr_in = (struct sockaddr_in *)dst_addr;
struct sockaddr_in6 *daddr_in6 = (struct sockaddr_in6 *)dst_addr;
struct be_ctrl_info *ctrl = &phba->ctrl;
- struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+ struct be_mcc_wrb *wrb = wrb_from_mccq(phba);
struct tcp_connect_and_offload_in *req = embedded_payload(wrb);
unsigned short def_hdr_id;
unsigned short def_data_id;
struct phys_addr template_address = { 0, 0 };
struct phys_addr *ptemplate_address;
int status = 0;
+ unsigned int i;
unsigned short cid = beiscsi_ep->ep_cid;
phwi_ctrlr = phba->phwi_ctrlr;
@@ -296,14 +300,18 @@
}
req->cid = cid;
- req->cq_id = phwi_context->be_cq.id;
+ i = phba->nxt_cqid++;
+ if (phba->nxt_cqid == phba->num_cpus)
+ phba->nxt_cqid = 0;
+ req->cq_id = phwi_context->be_cq[i].id;
+ SE_DEBUG(DBG_LVL_8, "i=%d cq_id=%d \n", i, req->cq_id);
req->defq_id = def_hdr_id;
req->hdr_ring_id = def_hdr_id;
req->data_ring_id = def_data_id;
req->do_offload = 1;
req->dataout_template_pa.lo = ptemplate_address->lo;
req->dataout_template_pa.hi = ptemplate_address->hi;
- status = be_mbox_notify(ctrl);
+ status = be_mcc_notify_wait(phba);
if (!status) {
struct iscsi_endpoint *ep;
struct tcp_connect_and_offload_out *ptcpcnct_out =
@@ -311,7 +319,7 @@
ep = phba->ep_array[ptcpcnct_out->cid];
beiscsi_ep = ep->dd_data;
- beiscsi_ep->fw_handle = 0;
+ beiscsi_ep->fw_handle = ptcpcnct_out->connection_handle;
beiscsi_ep->cid_vld = 1;
SE_DEBUG(DBG_LVL_8, "mgmt_open_connection Success\n");
} else
@@ -319,3 +327,30 @@
spin_unlock(&ctrl->mbox_lock);
return status;
}
+
+int be_cmd_get_mac_addr(struct beiscsi_hba *phba, u8 *mac_addr)
+{
+ struct be_ctrl_info *ctrl = &phba->ctrl;
+ struct be_mcc_wrb *wrb = wrb_from_mccq(phba);
+ struct be_cmd_req_get_mac_addr *req = embedded_payload(wrb);
+ int status;
+
+ SE_DEBUG(DBG_LVL_8, "In be_cmd_get_mac_addr\n");
+ spin_lock(&ctrl->mbox_lock);
+ memset(wrb, 0, sizeof(*wrb));
+ be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+ be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_ISCSI,
+ OPCODE_COMMON_ISCSI_NTWK_GET_NIC_CONFIG,
+ sizeof(*req));
+
+ status = be_mcc_notify_wait(phba);
+ if (!status) {
+ struct be_cmd_resp_get_mac_addr *resp = embedded_payload(wrb);
+
+ memcpy(mac_addr, resp->mac_address, ETH_ALEN);
+ }
+
+ spin_unlock(&ctrl->mbox_lock);
+ return status;
+}
+
diff --git a/drivers/scsi/be2iscsi/be_mgmt.h b/drivers/scsi/be2iscsi/be_mgmt.h
index 00e816e..24eaff9 100644
--- a/drivers/scsi/be2iscsi/be_mgmt.h
+++ b/drivers/scsi/be2iscsi/be_mgmt.h
@@ -175,7 +175,9 @@
u8 phy_port;
u32 firmware_post_status;
u32 hba_mtu[8];
- u32 future_u32[4];
+ u8 iscsi_features;
+ u8 future_u8[3];
+ u32 future_u32[3];
} __packed;
struct mgmt_controller_attributes {
@@ -246,4 +248,8 @@
unsigned short cid,
unsigned short issue_reset,
unsigned short savecfg_flag);
+
+unsigned char mgmt_fw_cmd(struct be_ctrl_info *ctrl,
+ struct beiscsi_hba *phba,
+ char *buf, unsigned int len);
#endif
diff --git a/drivers/scsi/bfa/bfa_cb_ioim_macros.h b/drivers/scsi/bfa/bfa_cb_ioim_macros.h
index 0050c83..961fe43 100644
--- a/drivers/scsi/bfa/bfa_cb_ioim_macros.h
+++ b/drivers/scsi/bfa/bfa_cb_ioim_macros.h
@@ -51,7 +51,7 @@
lun.bfa_lun = 0;
lun.scsi_lun[0] = bfa_os_htons(luno);
- return (lun.bfa_lun);
+ return lun.bfa_lun;
}
/**
@@ -68,7 +68,7 @@
{
struct scsi_cmnd *cmnd = (struct scsi_cmnd *)dio;
- return ((u8 *) cmnd->cmnd);
+ return (u8 *) cmnd->cmnd;
}
/**
@@ -97,7 +97,7 @@
{
struct scsi_cmnd *cmnd = (struct scsi_cmnd *)dio;
- return (scsi_bufflen(cmnd));
+ return scsi_bufflen(cmnd);
}
/**
@@ -129,7 +129,7 @@
sge = (struct scatterlist *)scsi_sglist(cmnd) + sgeid;
addr = (u64) sg_dma_address(sge);
- return (*(union bfi_addr_u *) &addr);
+ return *((union bfi_addr_u *) &addr);
}
static inline u32
@@ -197,7 +197,7 @@
{
struct scsi_cmnd *cmnd = (struct scsi_cmnd *)dio;
- return (cmnd->cmd_len);
+ return cmnd->cmd_len;
}
diff --git a/drivers/scsi/bfa/bfa_cee.c b/drivers/scsi/bfa/bfa_cee.c
index 7a959c3..2b91779 100644
--- a/drivers/scsi/bfa/bfa_cee.c
+++ b/drivers/scsi/bfa/bfa_cee.c
@@ -228,7 +228,7 @@
u32
bfa_cee_meminfo(void)
{
- return (bfa_cee_attr_meminfo() + bfa_cee_stats_meminfo());
+ return bfa_cee_attr_meminfo() + bfa_cee_stats_meminfo();
}
/**
diff --git a/drivers/scsi/bfa/bfa_csdebug.c b/drivers/scsi/bfa/bfa_csdebug.c
index 1b71d34..caeb114 100644
--- a/drivers/scsi/bfa/bfa_csdebug.c
+++ b/drivers/scsi/bfa/bfa_csdebug.c
@@ -47,12 +47,12 @@
tqe = bfa_q_next(q);
while (tqe != q) {
if (tqe == qe)
- return (1);
+ return 1;
tqe = bfa_q_next(tqe);
if (tqe == NULL)
break;
}
- return (0);
+ return 0;
}
diff --git a/drivers/scsi/bfa/bfa_fcpim.c b/drivers/scsi/bfa/bfa_fcpim.c
index 401babe..790c945 100644
--- a/drivers/scsi/bfa/bfa_fcpim.c
+++ b/drivers/scsi/bfa/bfa_fcpim.c
@@ -131,7 +131,7 @@
{
struct bfa_fcpim_mod_s *fcpim = BFA_FCPIM_MOD(bfa);
- return (fcpim->path_tov / 1000);
+ return fcpim->path_tov / 1000;
}
bfa_status_t
@@ -169,7 +169,7 @@
{
struct bfa_fcpim_mod_s *fcpim = BFA_FCPIM_MOD(bfa);
- return (fcpim->q_depth);
+ return fcpim->q_depth;
}
diff --git a/drivers/scsi/bfa/bfa_fcpim_priv.h b/drivers/scsi/bfa/bfa_fcpim_priv.h
index 153206c..5cf4184 100644
--- a/drivers/scsi/bfa/bfa_fcpim_priv.h
+++ b/drivers/scsi/bfa/bfa_fcpim_priv.h
@@ -35,7 +35,7 @@
#define BFA_FCPIM_PATHTOV_MAX (90 * 1000) /* in millisecs */
#define bfa_fcpim_stats(__fcpim, __stats) \
- (__fcpim)->stats.__stats ++
+ ((__fcpim)->stats.__stats++)
struct bfa_fcpim_mod_s {
struct bfa_s *bfa;
@@ -143,7 +143,7 @@
struct bfa_itnim_hal_stats_s stats;
};
-#define bfa_itnim_is_online(_itnim) (_itnim)->is_online
+#define bfa_itnim_is_online(_itnim) ((_itnim)->is_online)
#define BFA_FCPIM_MOD(_hal) (&(_hal)->modules.fcpim_mod)
#define BFA_IOIM_FROM_TAG(_fcpim, _iotag) \
(&fcpim->ioim_arr[_iotag])
diff --git a/drivers/scsi/bfa/bfa_fcport.c b/drivers/scsi/bfa/bfa_fcport.c
index 9924359..aef648b 100644
--- a/drivers/scsi/bfa/bfa_fcport.c
+++ b/drivers/scsi/bfa/bfa_fcport.c
@@ -388,32 +388,29 @@
bfa_pport_callback(pport, BFA_PPORT_LINKDOWN);
bfa_plog_str(pport->bfa->plog, BFA_PL_MID_HAL,
BFA_PL_EID_PORT_ST_CHANGE, 0, "Port Linkdown");
- if (BFA_PORT_IS_DISABLED(pport->bfa)) {
+ if (BFA_PORT_IS_DISABLED(pport->bfa))
bfa_pport_aen_post(pport, BFA_PORT_AEN_OFFLINE);
- } else {
+ else
bfa_pport_aen_post(pport, BFA_PORT_AEN_DISCONNECT);
- }
break;
case BFA_PPORT_SM_STOP:
bfa_sm_set_state(pport, bfa_pport_sm_stopped);
bfa_pport_reset_linkinfo(pport);
- if (BFA_PORT_IS_DISABLED(pport->bfa)) {
+ if (BFA_PORT_IS_DISABLED(pport->bfa))
bfa_pport_aen_post(pport, BFA_PORT_AEN_OFFLINE);
- } else {
+ else
bfa_pport_aen_post(pport, BFA_PORT_AEN_DISCONNECT);
- }
break;
case BFA_PPORT_SM_HWFAIL:
bfa_sm_set_state(pport, bfa_pport_sm_iocdown);
bfa_pport_reset_linkinfo(pport);
bfa_pport_callback(pport, BFA_PPORT_LINKDOWN);
- if (BFA_PORT_IS_DISABLED(pport->bfa)) {
+ if (BFA_PORT_IS_DISABLED(pport->bfa))
bfa_pport_aen_post(pport, BFA_PORT_AEN_OFFLINE);
- } else {
+ else
bfa_pport_aen_post(pport, BFA_PORT_AEN_DISCONNECT);
- }
break;
default:
@@ -999,10 +996,10 @@
struct bfa_pport_s *pport = BFA_PORT_MOD(bfa);
if (pport->diag_busy)
- return (BFA_STATUS_DIAG_BUSY);
+ return BFA_STATUS_DIAG_BUSY;
else if (bfa_sm_cmp_state
(BFA_PORT_MOD(bfa), bfa_pport_sm_disabling_qwait))
- return (BFA_STATUS_DEVBUSY);
+ return BFA_STATUS_DEVBUSY;
bfa_sm_send_event(BFA_PORT_MOD(bfa), BFA_PPORT_SM_ENABLE);
return BFA_STATUS_OK;
@@ -1032,7 +1029,7 @@
pport->cfg.speed = speed;
- return (BFA_STATUS_OK);
+ return BFA_STATUS_OK;
}
/**
@@ -1068,7 +1065,7 @@
}
pport->cfg.topology = topology;
- return (BFA_STATUS_OK);
+ return BFA_STATUS_OK;
}
/**
@@ -1094,7 +1091,7 @@
pport->cfg.cfg_hardalpa = BFA_TRUE;
pport->cfg.hardalpa = alpa;
- return (BFA_STATUS_OK);
+ return BFA_STATUS_OK;
}
bfa_status_t
@@ -1106,7 +1103,7 @@
bfa_trc(bfa, pport->cfg.hardalpa);
pport->cfg.cfg_hardalpa = BFA_FALSE;
- return (BFA_STATUS_OK);
+ return BFA_STATUS_OK;
}
bfa_boolean_t
@@ -1138,16 +1135,16 @@
* with in range
*/
if ((maxfrsize > FC_MAX_PDUSZ) || (maxfrsize < FC_MIN_PDUSZ))
- return (BFA_STATUS_INVLD_DFSZ);
+ return BFA_STATUS_INVLD_DFSZ;
/*
* power of 2, if not the max frame size of 2112
*/
if ((maxfrsize != FC_MAX_PDUSZ) && (maxfrsize & (maxfrsize - 1)))
- return (BFA_STATUS_INVLD_DFSZ);
+ return BFA_STATUS_INVLD_DFSZ;
pport->cfg.maxfrsize = maxfrsize;
- return (BFA_STATUS_OK);
+ return BFA_STATUS_OK;
}
u16
@@ -1415,7 +1412,7 @@
if (port->stats_busy) {
bfa_trc(bfa, port->stats_busy);
- return (BFA_STATUS_DEVBUSY);
+ return BFA_STATUS_DEVBUSY;
}
port->stats_busy = BFA_TRUE;
@@ -1427,7 +1424,7 @@
bfa_timer_start(bfa, &port->timer, bfa_port_stats_timeout, port,
BFA_PORT_STATS_TOV);
- return (BFA_STATUS_OK);
+ return BFA_STATUS_OK;
}
bfa_status_t
@@ -1437,7 +1434,7 @@
if (port->stats_busy) {
bfa_trc(bfa, port->stats_busy);
- return (BFA_STATUS_DEVBUSY);
+ return BFA_STATUS_DEVBUSY;
}
port->stats_busy = BFA_TRUE;
@@ -1448,7 +1445,7 @@
bfa_timer_start(bfa, &port->timer, bfa_port_stats_clr_timeout, port,
BFA_PORT_STATS_TOV);
- return (BFA_STATUS_OK);
+ return BFA_STATUS_OK;
}
bfa_status_t
@@ -1515,7 +1512,7 @@
/*
* QoS stats is embedded in port stats
*/
- return (bfa_pport_get_stats(bfa, stats, cbfn, cbarg));
+ return bfa_pport_get_stats(bfa, stats, cbfn, cbarg);
}
bfa_status_t
@@ -1525,7 +1522,7 @@
if (port->stats_busy) {
bfa_trc(bfa, port->stats_busy);
- return (BFA_STATUS_DEVBUSY);
+ return BFA_STATUS_DEVBUSY;
}
port->stats_busy = BFA_TRUE;
@@ -1536,7 +1533,7 @@
bfa_timer_start(bfa, &port->timer, bfa_port_stats_clr_timeout, port,
BFA_PORT_STATS_TOV);
- return (BFA_STATUS_OK);
+ return BFA_STATUS_OK;
}
/**
@@ -1545,7 +1542,7 @@
bfa_status_t
bfa_pport_trunk_disable(struct bfa_s *bfa)
{
- return (BFA_STATUS_OK);
+ return BFA_STATUS_OK;
}
bfa_boolean_t
@@ -1562,8 +1559,8 @@
{
struct bfa_pport_s *port = BFA_PORT_MOD(bfa);
- return (bfa_sm_to_state(hal_pport_sm_table, port->sm) ==
- BFA_PPORT_ST_DISABLED);
+ return bfa_sm_to_state(hal_pport_sm_table, port->sm) ==
+ BFA_PPORT_ST_DISABLED;
}
@@ -1572,7 +1569,7 @@
{
struct bfa_pport_s *pport = BFA_PORT_MOD(bfa);
-return (pport->cfg.ratelimit ? BFA_TRUE : BFA_FALSE);
+ return pport->cfg.ratelimit ? BFA_TRUE : BFA_FALSE;
}
@@ -1620,7 +1617,7 @@
pport->cfg.trl_def_speed = speed;
- return (BFA_STATUS_OK);
+ return BFA_STATUS_OK;
}
/**
@@ -1632,7 +1629,7 @@
struct bfa_pport_s *pport = BFA_PORT_MOD(bfa);
bfa_trc(bfa, pport->cfg.trl_def_speed);
- return (pport->cfg.trl_def_speed);
+ return pport->cfg.trl_def_speed;
}
diff --git a/drivers/scsi/bfa/bfa_fcs_lport.c b/drivers/scsi/bfa/bfa_fcs_lport.c
index 8975ed0..c7ab257 100644
--- a/drivers/scsi/bfa/bfa_fcs_lport.c
+++ b/drivers/scsi/bfa/bfa_fcs_lport.c
@@ -568,11 +568,10 @@
__port_action[port->fabric->fab_type].offline(port);
- if (bfa_fcs_fabric_is_online(port->fabric) == BFA_TRUE) {
+ if (bfa_fcs_fabric_is_online(port->fabric) == BFA_TRUE)
bfa_fcs_port_aen_post(port, BFA_LPORT_AEN_DISCONNECT);
- } else {
+ else
bfa_fcs_port_aen_post(port, BFA_LPORT_AEN_OFFLINE);
- }
bfa_fcb_port_offline(port->fcs->bfad, port->port_cfg.roles,
port->fabric->vf_drv,
(port->vport == NULL) ? NULL : port->vport->vport_drv);
@@ -777,7 +776,7 @@
}
bfa_trc(port->fcs, pwwn);
- return (NULL);
+ return NULL;
}
/**
@@ -796,7 +795,7 @@
}
bfa_trc(port->fcs, nwwn);
- return (NULL);
+ return NULL;
}
/**
@@ -870,7 +869,7 @@
bfa_boolean_t
bfa_fcs_port_is_online(struct bfa_fcs_port_s *port)
{
- return (bfa_sm_cmp_state(port, bfa_fcs_port_sm_online));
+ return bfa_sm_cmp_state(port, bfa_fcs_port_sm_online);
}
/**
diff --git a/drivers/scsi/bfa/bfa_fcxp.c b/drivers/scsi/bfa/bfa_fcxp.c
index 4754a0e..cf0ad67 100644
--- a/drivers/scsi/bfa/bfa_fcxp.c
+++ b/drivers/scsi/bfa/bfa_fcxp.c
@@ -199,7 +199,7 @@
if (fcxp)
list_add_tail(&fcxp->qe, &fm->fcxp_active_q);
- return (fcxp);
+ return fcxp;
}
static void
@@ -503,7 +503,7 @@
fcxp = bfa_fcxp_get(BFA_FCXP_MOD(bfa));
if (fcxp == NULL)
- return (NULL);
+ return NULL;
bfa_trc(bfa, fcxp->fcxp_tag);
@@ -568,7 +568,7 @@
}
}
- return (fcxp);
+ return fcxp;
}
/**
@@ -709,7 +709,7 @@
bfa_fcxp_abort(struct bfa_fcxp_s *fcxp)
{
bfa_assert(0);
- return (BFA_STATUS_OK);
+ return BFA_STATUS_OK;
}
void
diff --git a/drivers/scsi/bfa/bfa_intr.c b/drivers/scsi/bfa/bfa_intr.c
index 0ca1257..b36540e 100644
--- a/drivers/scsi/bfa/bfa_intr.c
+++ b/drivers/scsi/bfa/bfa_intr.c
@@ -59,7 +59,7 @@
qintr = intr & __HFN_INT_RME_MASK;
bfa_reg_write(bfa->iocfc.bfa_regs.intr_status, qintr);
- for (queue = 0; queue < BFI_IOC_MAX_CQS_ASIC; queue ++) {
+ for (queue = 0; queue < BFI_IOC_MAX_CQS_ASIC; queue++) {
if (intr & (__HFN_INT_RME_Q0 << queue))
bfa_msix_rspq(bfa, queue & (BFI_IOC_MAX_CQS - 1));
}
diff --git a/drivers/scsi/bfa/bfa_intr_priv.h b/drivers/scsi/bfa/bfa_intr_priv.h
index 8ce6e6b..5fc301c 100644
--- a/drivers/scsi/bfa/bfa_intr_priv.h
+++ b/drivers/scsi/bfa/bfa_intr_priv.h
@@ -26,9 +26,9 @@
void bfa_isr_bind(enum bfi_mclass mc, bfa_isr_func_t isr_func);
-#define bfa_reqq_pi(__bfa, __reqq) (__bfa)->iocfc.req_cq_pi[__reqq]
+#define bfa_reqq_pi(__bfa, __reqq) ((__bfa)->iocfc.req_cq_pi[__reqq])
#define bfa_reqq_ci(__bfa, __reqq) \
- *(u32 *)((__bfa)->iocfc.req_cq_shadow_ci[__reqq].kva)
+ (*(u32 *)((__bfa)->iocfc.req_cq_shadow_ci[__reqq].kva))
#define bfa_reqq_full(__bfa, __reqq) \
(((bfa_reqq_pi(__bfa, __reqq) + 1) & \
@@ -50,14 +50,16 @@
} while (0)
#define bfa_rspq_pi(__bfa, __rspq) \
- *(u32 *)((__bfa)->iocfc.rsp_cq_shadow_pi[__rspq].kva)
+ (*(u32 *)((__bfa)->iocfc.rsp_cq_shadow_pi[__rspq].kva))
-#define bfa_rspq_ci(__bfa, __rspq) (__bfa)->iocfc.rsp_cq_ci[__rspq]
+#define bfa_rspq_ci(__bfa, __rspq) ((__bfa)->iocfc.rsp_cq_ci[__rspq])
#define bfa_rspq_elem(__bfa, __rspq, __ci) \
- &((struct bfi_msg_s *)((__bfa)->iocfc.rsp_cq_ba[__rspq].kva))[__ci]
+ (&((struct bfi_msg_s *)((__bfa)->iocfc.rsp_cq_ba[__rspq].kva))[__ci])
-#define CQ_INCR(__index, __size) \
- (__index)++; (__index) &= ((__size) - 1)
+#define CQ_INCR(__index, __size) do { \
+ (__index)++; \
+ (__index) &= ((__size) - 1); \
+} while (0)
/**
* Queue element to wait for room in request queue. FIFO order is
@@ -94,7 +96,7 @@
wqe->cbarg = cbarg;
}
-#define bfa_reqq(__bfa, __reqq) &(__bfa)->reqq_waitq[__reqq]
+#define bfa_reqq(__bfa, __reqq) (&(__bfa)->reqq_waitq[__reqq])
/**
* static inline void
diff --git a/drivers/scsi/bfa/bfa_ioc.c b/drivers/scsi/bfa/bfa_ioc.c
index 1493489..397d7e9 100644
--- a/drivers/scsi/bfa/bfa_ioc.c
+++ b/drivers/scsi/bfa/bfa_ioc.c
@@ -51,7 +51,7 @@
(sizeof(struct bfa_trc_mod_s) - \
BFA_TRC_MAX * sizeof(struct bfa_trc_s)))
#define BFA_DBG_FWTRC_OFF(_fn) (BFI_IOC_TRC_OFF + BFA_DBG_FWTRC_LEN * (_fn))
-#define bfa_ioc_stats(_ioc, _stats) (_ioc)->stats._stats ++
+#define bfa_ioc_stats(_ioc, _stats) ((_ioc)->stats._stats++)
#define BFA_FLASH_CHUNK_NO(off) (off / BFI_FLASH_CHUNK_SZ_WORDS)
#define BFA_FLASH_OFFSET_IN_CHUNK(off) (off % BFI_FLASH_CHUNK_SZ_WORDS)
@@ -1953,8 +1953,8 @@
bfa_boolean_t
bfa_ioc_is_disabled(struct bfa_ioc_s *ioc)
{
- return (bfa_fsm_cmp_state(ioc, bfa_ioc_sm_disabling)
- || bfa_fsm_cmp_state(ioc, bfa_ioc_sm_disabled));
+ return bfa_fsm_cmp_state(ioc, bfa_ioc_sm_disabling)
+ || bfa_fsm_cmp_state(ioc, bfa_ioc_sm_disabled);
}
/**
@@ -1963,9 +1963,9 @@
bfa_boolean_t
bfa_ioc_fw_mismatch(struct bfa_ioc_s *ioc)
{
- return (bfa_fsm_cmp_state(ioc, bfa_ioc_sm_reset)
+ return bfa_fsm_cmp_state(ioc, bfa_ioc_sm_reset)
|| bfa_fsm_cmp_state(ioc, bfa_ioc_sm_fwcheck)
- || bfa_fsm_cmp_state(ioc, bfa_ioc_sm_mismatch));
+ || bfa_fsm_cmp_state(ioc, bfa_ioc_sm_mismatch);
}
#define bfa_ioc_state_disabled(__sm) \
diff --git a/drivers/scsi/bfa/bfa_ioc.h b/drivers/scsi/bfa/bfa_ioc.h
index 58efd4b..7c30f05 100644
--- a/drivers/scsi/bfa/bfa_ioc.h
+++ b/drivers/scsi/bfa/bfa_ioc.h
@@ -179,16 +179,16 @@
struct bfa_ioc_mbox_mod_s mbox_mod;
};
-#define bfa_ioc_pcifn(__ioc) (__ioc)->pcidev.pci_func
-#define bfa_ioc_devid(__ioc) (__ioc)->pcidev.device_id
-#define bfa_ioc_bar0(__ioc) (__ioc)->pcidev.pci_bar_kva
+#define bfa_ioc_pcifn(__ioc) ((__ioc)->pcidev.pci_func)
+#define bfa_ioc_devid(__ioc) ((__ioc)->pcidev.device_id)
+#define bfa_ioc_bar0(__ioc) ((__ioc)->pcidev.pci_bar_kva)
#define bfa_ioc_portid(__ioc) ((__ioc)->port_id)
#define bfa_ioc_fetch_stats(__ioc, __stats) \
- ((__stats)->drv_stats) = (__ioc)->stats
+ (((__stats)->drv_stats) = (__ioc)->stats)
#define bfa_ioc_clr_stats(__ioc) \
bfa_os_memset(&(__ioc)->stats, 0, sizeof((__ioc)->stats))
-#define bfa_ioc_maxfrsize(__ioc) (__ioc)->attr->maxfrsize
-#define bfa_ioc_rx_bbcredit(__ioc) (__ioc)->attr->rx_bbcredit
+#define bfa_ioc_maxfrsize(__ioc) ((__ioc)->attr->maxfrsize)
+#define bfa_ioc_rx_bbcredit(__ioc) ((__ioc)->attr->rx_bbcredit)
#define bfa_ioc_speed_sup(__ioc) \
BFI_ADAPTER_GETP(SPEED, (__ioc)->attr->adapter_prop)
diff --git a/drivers/scsi/bfa/bfa_iocfc.c b/drivers/scsi/bfa/bfa_iocfc.c
index 12350b0..d7ab792 100644
--- a/drivers/scsi/bfa/bfa_iocfc.c
+++ b/drivers/scsi/bfa/bfa_iocfc.c
@@ -794,7 +794,7 @@
if (iocfc->stats_busy) {
bfa_trc(bfa, iocfc->stats_busy);
- return (BFA_STATUS_DEVBUSY);
+ return BFA_STATUS_DEVBUSY;
}
iocfc->stats_busy = BFA_TRUE;
@@ -804,7 +804,7 @@
bfa_iocfc_stats_query(bfa);
- return (BFA_STATUS_OK);
+ return BFA_STATUS_OK;
}
bfa_status_t
@@ -814,7 +814,7 @@
if (iocfc->stats_busy) {
bfa_trc(bfa, iocfc->stats_busy);
- return (BFA_STATUS_DEVBUSY);
+ return BFA_STATUS_DEVBUSY;
}
iocfc->stats_busy = BFA_TRUE;
@@ -822,7 +822,7 @@
iocfc->stats_cbarg = cbarg;
bfa_iocfc_stats_clear(bfa);
- return (BFA_STATUS_OK);
+ return BFA_STATUS_OK;
}
/**
diff --git a/drivers/scsi/bfa/bfa_iocfc.h b/drivers/scsi/bfa/bfa_iocfc.h
index 7ad177e..ce9a830 100644
--- a/drivers/scsi/bfa/bfa_iocfc.h
+++ b/drivers/scsi/bfa/bfa_iocfc.h
@@ -107,13 +107,13 @@
#define bfa_lpuid(__bfa) bfa_ioc_portid(&(__bfa)->ioc)
#define bfa_msix_init(__bfa, __nvecs) \
- (__bfa)->iocfc.hwif.hw_msix_init(__bfa, __nvecs)
+ ((__bfa)->iocfc.hwif.hw_msix_init(__bfa, __nvecs))
#define bfa_msix_install(__bfa) \
- (__bfa)->iocfc.hwif.hw_msix_install(__bfa)
+ ((__bfa)->iocfc.hwif.hw_msix_install(__bfa))
#define bfa_msix_uninstall(__bfa) \
- (__bfa)->iocfc.hwif.hw_msix_uninstall(__bfa)
+ ((__bfa)->iocfc.hwif.hw_msix_uninstall(__bfa))
#define bfa_isr_mode_set(__bfa, __msix) \
- (__bfa)->iocfc.hwif.hw_isr_mode_set(__bfa, __msix)
+ ((__bfa)->iocfc.hwif.hw_isr_mode_set(__bfa, __msix))
#define bfa_msix_getvecs(__bfa, __vecmap, __nvecs, __maxvec) \
(__bfa)->iocfc.hwif.hw_msix_getvecs(__bfa, __vecmap, __nvecs, __maxvec)
diff --git a/drivers/scsi/bfa/bfa_ioim.c b/drivers/scsi/bfa/bfa_ioim.c
index 7ae2552..f81d359 100644
--- a/drivers/scsi/bfa/bfa_ioim.c
+++ b/drivers/scsi/bfa/bfa_ioim.c
@@ -105,13 +105,13 @@
bfa_sm_set_state(ioim, bfa_ioim_sm_hcb);
list_del(&ioim->qe);
list_add_tail(&ioim->qe,
- &ioim->fcpim->ioim_comp_q);
+ &ioim->fcpim->ioim_comp_q);
bfa_cb_queue(ioim->bfa, &ioim->hcb_qe,
__bfa_cb_ioim_pathtov, ioim);
} else {
list_del(&ioim->qe);
list_add_tail(&ioim->qe,
- &ioim->itnim->pending_q);
+ &ioim->itnim->pending_q);
}
break;
}
diff --git a/drivers/scsi/bfa/bfa_itnim.c b/drivers/scsi/bfa/bfa_itnim.c
index 4d5c61a..eabf7d3 100644
--- a/drivers/scsi/bfa/bfa_itnim.c
+++ b/drivers/scsi/bfa/bfa_itnim.c
@@ -1029,7 +1029,7 @@
bfa_stats(itnim, creates);
bfa_sm_send_event(itnim, BFA_ITNIM_SM_CREATE);
- return (itnim);
+ return itnim;
}
void
@@ -1061,7 +1061,7 @@
bfa_boolean_t
bfa_itnim_hold_io(struct bfa_itnim_s *itnim)
{
- return (
+ return
itnim->fcpim->path_tov && itnim->iotov_active &&
(bfa_sm_cmp_state(itnim, bfa_itnim_sm_fwcreate) ||
bfa_sm_cmp_state(itnim, bfa_itnim_sm_sler) ||
@@ -1069,7 +1069,7 @@
bfa_sm_cmp_state(itnim, bfa_itnim_sm_fwdelete) ||
bfa_sm_cmp_state(itnim, bfa_itnim_sm_offline) ||
bfa_sm_cmp_state(itnim, bfa_itnim_sm_iocdisable))
-);
+ ;
}
void
diff --git a/drivers/scsi/bfa/bfa_log.c b/drivers/scsi/bfa/bfa_log.c
index c2735e5..e751401 100644
--- a/drivers/scsi/bfa/bfa_log.c
+++ b/drivers/scsi/bfa/bfa_log.c
@@ -231,9 +231,9 @@
return BFA_LOG_INVALID;
if (log_mod)
- return (log_mod->log_level[mod_id]);
+ return log_mod->log_level[mod_id];
else
- return (bfa_log_info[mod_id].level);
+ return bfa_log_info[mod_id].level;
}
enum bfa_log_severity
diff --git a/drivers/scsi/bfa/bfa_port_priv.h b/drivers/scsi/bfa/bfa_port_priv.h
index 4b97e27..51f698a 100644
--- a/drivers/scsi/bfa/bfa_port_priv.h
+++ b/drivers/scsi/bfa/bfa_port_priv.h
@@ -59,8 +59,8 @@
u8 *stats_kva;
u64 stats_pa;
union bfa_pport_stats_u *stats; /* pport stats */
- u32 mypid : 24;
- u32 rsvd_b : 8;
+ u32 mypid:24;
+ u32 rsvd_b:8;
struct bfa_timer_s timer; /* timer */
union bfa_pport_stats_u *stats_ret;
/* driver stats location */
diff --git a/drivers/scsi/bfa/bfa_rport.c b/drivers/scsi/bfa/bfa_rport.c
index 16da77a..3e1990a 100644
--- a/drivers/scsi/bfa/bfa_rport.c
+++ b/drivers/scsi/bfa/bfa_rport.c
@@ -677,7 +677,7 @@
if (rport)
list_add_tail(&rport->qe, &mod->rp_active_q);
- return (rport);
+ return rport;
}
static void
@@ -834,7 +834,7 @@
rp = bfa_rport_alloc(BFA_RPORT_MOD(bfa));
if (rp == NULL)
- return (NULL);
+ return NULL;
rp->bfa = bfa;
rp->rport_drv = rport_drv;
@@ -843,7 +843,7 @@
bfa_assert(bfa_sm_cmp_state(rp, bfa_rport_sm_uninit));
bfa_sm_send_event(rp, BFA_RPORT_SM_CREATE);
- return (rp);
+ return rp;
}
void
diff --git a/drivers/scsi/bfa/bfa_tskim.c b/drivers/scsi/bfa/bfa_tskim.c
index 010d40d..ff7a4dc 100644
--- a/drivers/scsi/bfa/bfa_tskim.c
+++ b/drivers/scsi/bfa/bfa_tskim.c
@@ -23,13 +23,14 @@
/**
* task management completion handling
*/
-#define bfa_tskim_qcomp(__tskim, __cbfn) do { \
- bfa_cb_queue((__tskim)->bfa, &(__tskim)->hcb_qe, __cbfn, (__tskim)); \
+#define bfa_tskim_qcomp(__tskim, __cbfn) do { \
+ bfa_cb_queue((__tskim)->bfa, &(__tskim)->hcb_qe, \
+ __cbfn, (__tskim)); \
bfa_tskim_notify_comp(__tskim); \
} while (0)
-#define bfa_tskim_notify_comp(__tskim) do { \
- if ((__tskim)->notify) \
+#define bfa_tskim_notify_comp(__tskim) do { \
+ if ((__tskim)->notify) \
bfa_itnim_tskdone((__tskim)->itnim); \
} while (0)
diff --git a/drivers/scsi/bfa/bfa_uf.c b/drivers/scsi/bfa/bfa_uf.c
index ff5f9de..4b3c241 100644
--- a/drivers/scsi/bfa/bfa_uf.c
+++ b/drivers/scsi/bfa/bfa_uf.c
@@ -185,7 +185,7 @@
struct bfa_uf_s *uf;
bfa_q_deq(&uf_mod->uf_free_q, &uf);
- return (uf);
+ return uf;
}
static void
diff --git a/drivers/scsi/bfa/bfad.c b/drivers/scsi/bfa/bfad.c
index 6f2be5a..b52b773 100644
--- a/drivers/scsi/bfa/bfad.c
+++ b/drivers/scsi/bfa/bfad.c
@@ -188,8 +188,8 @@
bfad_get_drv_port(struct bfad_s *bfad, struct bfad_vf_s *vf_drv,
struct bfad_vport_s *vp_drv)
{
- return ((vp_drv) ? (&(vp_drv)->drv_port)
- : ((vf_drv) ? (&(vf_drv)->base_port) : (&(bfad)->pport)));
+ return (vp_drv) ? (&(vp_drv)->drv_port)
+ : ((vf_drv) ? (&(vf_drv)->base_port) : (&(bfad)->pport));
}
struct bfad_port_s *
@@ -716,7 +716,7 @@
if ((bfad->bfad_flags & BFAD_MSIX_ON)
&& bfad_install_msix_handler(bfad)) {
printk(KERN_WARNING "%s: install_msix failed, bfad%d\n",
- __FUNCTION__, bfad->inst_no);
+ __func__, bfad->inst_no);
}
bfad_init_timer(bfad);
diff --git a/drivers/scsi/bfa/bfad_fwimg.c b/drivers/scsi/bfa/bfad_fwimg.c
index bd34b0d..2ad65f2 100644
--- a/drivers/scsi/bfa/bfad_fwimg.c
+++ b/drivers/scsi/bfa/bfad_fwimg.c
@@ -65,10 +65,10 @@
memcpy(*bfi_image, fw->data, fw->size);
*bfi_image_size = fw->size/sizeof(u32);
- return(*bfi_image);
+ return *bfi_image;
error:
- return(NULL);
+ return NULL;
}
u32 *
@@ -78,12 +78,12 @@
if (bfi_image_ct_size == 0)
bfad_read_firmware(pdev, &bfi_image_ct,
&bfi_image_ct_size, BFAD_FW_FILE_CT);
- return(bfi_image_ct);
+ return bfi_image_ct;
} else {
if (bfi_image_cb_size == 0)
bfad_read_firmware(pdev, &bfi_image_cb,
&bfi_image_cb_size, BFAD_FW_FILE_CB);
- return(bfi_image_cb);
+ return bfi_image_cb;
}
}
diff --git a/drivers/scsi/bfa/bfad_im.c b/drivers/scsi/bfa/bfad_im.c
index 55d012a..f788c2a 100644
--- a/drivers/scsi/bfa/bfad_im.c
+++ b/drivers/scsi/bfa/bfad_im.c
@@ -1050,7 +1050,7 @@
} else {
printk(KERN_WARNING
"%s: itnim %llx is already in online state\n",
- __FUNCTION__,
+ __func__,
bfa_fcs_itnim_get_pwwn(&itnim->fcs_itnim));
}
diff --git a/drivers/scsi/bfa/bfad_im_compat.h b/drivers/scsi/bfa/bfad_im_compat.h
index 1d3e74e..b36be15 100644
--- a/drivers/scsi/bfa/bfad_im_compat.h
+++ b/drivers/scsi/bfa/bfad_im_compat.h
@@ -31,7 +31,7 @@
static inline u32 *
bfad_load_fwimg(struct pci_dev *pdev)
{
- return(bfad_get_firmware_buf(pdev));
+ return bfad_get_firmware_buf(pdev);
}
static inline void
diff --git a/drivers/scsi/bfa/bfad_intr.c b/drivers/scsi/bfa/bfad_intr.c
index f104e02..7de8832 100644
--- a/drivers/scsi/bfa/bfad_intr.c
+++ b/drivers/scsi/bfa/bfad_intr.c
@@ -23,13 +23,12 @@
/**
* bfa_isr BFA driver interrupt functions
*/
-irqreturn_t bfad_intx(int irq, void *dev_id);
static int msix_disable;
module_param(msix_disable, int, S_IRUGO | S_IWUSR);
/**
* Line based interrupt handler.
*/
-irqreturn_t
+static irqreturn_t
bfad_intx(int irq, void *dev_id)
{
struct bfad_s *bfad = dev_id;
diff --git a/drivers/scsi/bfa/fabric.c b/drivers/scsi/bfa/fabric.c
index a8b14c4..a4b5dd4 100644
--- a/drivers/scsi/bfa/fabric.c
+++ b/drivers/scsi/bfa/fabric.c
@@ -36,12 +36,12 @@
#define BFA_FCS_FABRIC_RETRY_DELAY (2000) /* Milliseconds */
#define BFA_FCS_FABRIC_CLEANUP_DELAY (10000) /* Milliseconds */
-#define bfa_fcs_fabric_set_opertype(__fabric) do { \
- if (bfa_pport_get_topology((__fabric)->fcs->bfa) \
- == BFA_PPORT_TOPOLOGY_P2P) \
- (__fabric)->oper_type = BFA_PPORT_TYPE_NPORT; \
- else \
- (__fabric)->oper_type = BFA_PPORT_TYPE_NLPORT; \
+#define bfa_fcs_fabric_set_opertype(__fabric) do { \
+ if (bfa_pport_get_topology((__fabric)->fcs->bfa) \
+ == BFA_PPORT_TOPOLOGY_P2P) \
+ (__fabric)->oper_type = BFA_PPORT_TYPE_NPORT; \
+ else \
+ (__fabric)->oper_type = BFA_PPORT_TYPE_NLPORT; \
} while (0)
/*
@@ -887,7 +887,7 @@
bfa_boolean_t
bfa_fcs_fabric_is_loopback(struct bfa_fcs_fabric_s *fabric)
{
- return (bfa_sm_cmp_state(fabric, bfa_fcs_fabric_sm_loopback));
+ return bfa_sm_cmp_state(fabric, bfa_fcs_fabric_sm_loopback);
}
enum bfa_pport_type
@@ -974,7 +974,7 @@
int
bfa_fcs_fabric_is_online(struct bfa_fcs_fabric_s *fabric)
{
- return (bfa_sm_cmp_state(fabric, bfa_fcs_fabric_sm_online));
+ return bfa_sm_cmp_state(fabric, bfa_fcs_fabric_sm_online);
}
@@ -1015,7 +1015,7 @@
u16
bfa_fcs_fabric_vport_count(struct bfa_fcs_fabric_s *fabric)
{
- return (fabric->num_vports);
+ return fabric->num_vports;
}
/**
diff --git a/drivers/scsi/bfa/fcbuild.c b/drivers/scsi/bfa/fcbuild.c
index d174706..fee5456 100644
--- a/drivers/scsi/bfa/fcbuild.c
+++ b/drivers/scsi/bfa/fcbuild.c
@@ -188,14 +188,14 @@
switch (els_cmd->els_code) {
case FC_ELS_LS_RJT:
if (ls_rjt->reason_code == FC_LS_RJT_RSN_LOGICAL_BUSY)
- return (FC_PARSE_BUSY);
+ return FC_PARSE_BUSY;
else
- return (FC_PARSE_FAILURE);
+ return FC_PARSE_FAILURE;
case FC_ELS_ACC:
- return (FC_PARSE_OK);
+ return FC_PARSE_OK;
}
- return (FC_PARSE_OK);
+ return FC_PARSE_OK;
}
static void
@@ -228,7 +228,7 @@
bfa_os_memcpy(&plogi->port_name, &port_name, sizeof(wwn_t));
bfa_os_memcpy(&plogi->node_name, &node_name, sizeof(wwn_t));
- return (sizeof(struct fc_logi_s));
+ return sizeof(struct fc_logi_s);
}
u16
@@ -267,7 +267,7 @@
flogi->csp.npiv_supp = 1; /* @todo. field name is not correct */
vvl_info[0] = bfa_os_htonl(FLOGI_VVL_BRCD);
- return (sizeof(struct fc_logi_s));
+ return sizeof(struct fc_logi_s);
}
u16
@@ -287,7 +287,7 @@
flogi->csp.bbcred = bfa_os_htons(local_bb_credits);
- return (sizeof(struct fc_logi_s));
+ return sizeof(struct fc_logi_s);
}
u16
@@ -306,7 +306,7 @@
flogi->port_name = port_name;
flogi->node_name = node_name;
- return (sizeof(struct fc_logi_s));
+ return sizeof(struct fc_logi_s);
}
u16
@@ -338,26 +338,26 @@
case FC_ELS_LS_RJT:
ls_rjt = (struct fc_ls_rjt_s *) (fchs + 1);
if (ls_rjt->reason_code == FC_LS_RJT_RSN_LOGICAL_BUSY)
- return (FC_PARSE_BUSY);
+ return FC_PARSE_BUSY;
else
- return (FC_PARSE_FAILURE);
+ return FC_PARSE_FAILURE;
case FC_ELS_ACC:
plogi = (struct fc_logi_s *) (fchs + 1);
if (len < sizeof(struct fc_logi_s))
- return (FC_PARSE_FAILURE);
+ return FC_PARSE_FAILURE;
if (!wwn_is_equal(plogi->port_name, port_name))
- return (FC_PARSE_FAILURE);
+ return FC_PARSE_FAILURE;
if (!plogi->class3.class_valid)
- return (FC_PARSE_FAILURE);
+ return FC_PARSE_FAILURE;
if (bfa_os_ntohs(plogi->class3.rxsz) < (FC_MIN_PDUSZ))
- return (FC_PARSE_FAILURE);
+ return FC_PARSE_FAILURE;
- return (FC_PARSE_OK);
+ return FC_PARSE_OK;
default:
- return (FC_PARSE_FAILURE);
+ return FC_PARSE_FAILURE;
}
}
@@ -372,7 +372,7 @@
if ((bfa_os_ntohs(plogi->class3.rxsz) < FC_MIN_PDUSZ)
|| (bfa_os_ntohs(plogi->class3.rxsz) > FC_MAX_PDUSZ)
|| (plogi->class3.rxsz == 0))
- return (FC_PARSE_FAILURE);
+ return FC_PARSE_FAILURE;
return FC_PARSE_OK;
}
@@ -393,7 +393,7 @@
prli->parampage.servparams.task_retry_id = 0;
prli->parampage.servparams.confirm = 1;
- return (sizeof(struct fc_prli_s));
+ return sizeof(struct fc_prli_s);
}
u16
@@ -414,41 +414,41 @@
prli->parampage.rspcode = FC_PRLI_ACC_XQTD;
- return (sizeof(struct fc_prli_s));
+ return sizeof(struct fc_prli_s);
}
enum fc_parse_status
fc_prli_rsp_parse(struct fc_prli_s *prli, int len)
{
if (len < sizeof(struct fc_prli_s))
- return (FC_PARSE_FAILURE);
+ return FC_PARSE_FAILURE;
if (prli->command != FC_ELS_ACC)
- return (FC_PARSE_FAILURE);
+ return FC_PARSE_FAILURE;
if ((prli->parampage.rspcode != FC_PRLI_ACC_XQTD)
&& (prli->parampage.rspcode != FC_PRLI_ACC_PREDEF_IMG))
- return (FC_PARSE_FAILURE);
+ return FC_PARSE_FAILURE;
if (prli->parampage.servparams.target != 1)
- return (FC_PARSE_FAILURE);
+ return FC_PARSE_FAILURE;
- return (FC_PARSE_OK);
+ return FC_PARSE_OK;
}
enum fc_parse_status
fc_prli_parse(struct fc_prli_s *prli)
{
if (prli->parampage.type != FC_TYPE_FCP)
- return (FC_PARSE_FAILURE);
+ return FC_PARSE_FAILURE;
if (!prli->parampage.imagepair)
- return (FC_PARSE_FAILURE);
+ return FC_PARSE_FAILURE;
if (!prli->parampage.servparams.initiator)
- return (FC_PARSE_FAILURE);
+ return FC_PARSE_FAILURE;
- return (FC_PARSE_OK);
+ return FC_PARSE_OK;
}
u16
@@ -462,7 +462,7 @@
logo->nport_id = (s_id);
logo->orig_port_name = port_name;
- return (sizeof(struct fc_logo_s));
+ return sizeof(struct fc_logo_s);
}
static u16
@@ -484,7 +484,7 @@
adisc->orig_node_name = node_name;
adisc->nport_id = (s_id);
- return (sizeof(struct fc_adisc_s));
+ return sizeof(struct fc_adisc_s);
}
u16
@@ -511,15 +511,15 @@
{
if (len < sizeof(struct fc_adisc_s))
- return (FC_PARSE_FAILURE);
+ return FC_PARSE_FAILURE;
if (adisc->els_cmd.els_code != FC_ELS_ACC)
- return (FC_PARSE_FAILURE);
+ return FC_PARSE_FAILURE;
if (!wwn_is_equal(adisc->orig_port_name, port_name))
- return (FC_PARSE_FAILURE);
+ return FC_PARSE_FAILURE;
- return (FC_PARSE_OK);
+ return FC_PARSE_OK;
}
enum fc_parse_status
@@ -529,14 +529,14 @@
struct fc_adisc_s *adisc = (struct fc_adisc_s *) pld;
if (adisc->els_cmd.els_code != FC_ELS_ACC)
- return (FC_PARSE_FAILURE);
+ return FC_PARSE_FAILURE;
if ((adisc->nport_id == (host_dap))
&& wwn_is_equal(adisc->orig_port_name, port_name)
&& wwn_is_equal(adisc->orig_node_name, node_name))
- return (FC_PARSE_OK);
+ return FC_PARSE_OK;
- return (FC_PARSE_FAILURE);
+ return FC_PARSE_FAILURE;
}
enum fc_parse_status
@@ -550,13 +550,13 @@
if ((bfa_os_ntohs(pdisc->class3.rxsz) <
(FC_MIN_PDUSZ - sizeof(struct fchs_s)))
|| (pdisc->class3.rxsz == 0))
- return (FC_PARSE_FAILURE);
+ return FC_PARSE_FAILURE;
if (!wwn_is_equal(pdisc->port_name, port_name))
- return (FC_PARSE_FAILURE);
+ return FC_PARSE_FAILURE;
if (!wwn_is_equal(pdisc->node_name, node_name))
- return (FC_PARSE_FAILURE);
+ return FC_PARSE_FAILURE;
return FC_PARSE_OK;
}
@@ -570,7 +570,7 @@
fchs->s_id = (s_id);
fchs->ox_id = bfa_os_htons(ox_id);
- return (sizeof(struct fchs_s));
+ return sizeof(struct fchs_s);
}
enum fc_parse_status
@@ -578,9 +578,9 @@
{
if ((fchs->cat_info == FC_CAT_BA_ACC)
|| (fchs->cat_info == FC_CAT_BA_RJT))
- return (FC_PARSE_OK);
+ return FC_PARSE_OK;
- return (FC_PARSE_FAILURE);
+ return FC_PARSE_FAILURE;
}
u16
@@ -597,7 +597,7 @@
rrq->ox_id = bfa_os_htons(rrq_oxid);
rrq->rx_id = FC_RXID_ANY;
- return (sizeof(struct fc_rrq_s));
+ return sizeof(struct fc_rrq_s);
}
u16
@@ -611,7 +611,7 @@
memset(acc, 0, sizeof(struct fc_els_cmd_s));
acc->els_code = FC_ELS_ACC;
- return (sizeof(struct fc_els_cmd_s));
+ return sizeof(struct fc_els_cmd_s);
}
u16
@@ -627,7 +627,7 @@
ls_rjt->reason_code_expl = reason_code_expl;
ls_rjt->vendor_unique = 0x00;
- return (sizeof(struct fc_ls_rjt_s));
+ return sizeof(struct fc_ls_rjt_s);
}
u16
@@ -643,7 +643,7 @@
ba_acc->ox_id = fchs->ox_id;
ba_acc->rx_id = fchs->rx_id;
- return (sizeof(struct fc_ba_acc_s));
+ return sizeof(struct fc_ba_acc_s);
}
u16
@@ -654,7 +654,7 @@
memset(els_cmd, 0, sizeof(struct fc_els_cmd_s));
els_cmd->els_code = FC_ELS_ACC;
- return (sizeof(struct fc_els_cmd_s));
+ return sizeof(struct fc_els_cmd_s);
}
int
@@ -696,7 +696,7 @@
tprlo_acc->tprlo_acc_params[page].orig_process_assc = 0;
tprlo_acc->tprlo_acc_params[page].resp_process_assc = 0;
}
- return (bfa_os_ntohs(tprlo_acc->payload_len));
+ return bfa_os_ntohs(tprlo_acc->payload_len);
}
u16
@@ -721,7 +721,7 @@
prlo_acc->prlo_acc_params[page].resp_process_assc = 0;
}
- return (bfa_os_ntohs(prlo_acc->payload_len));
+ return bfa_os_ntohs(prlo_acc->payload_len);
}
u16
@@ -735,7 +735,7 @@
rnid->els_cmd.els_code = FC_ELS_RNID;
rnid->node_id_data_format = data_format;
- return (sizeof(struct fc_rnid_cmd_s));
+ return sizeof(struct fc_rnid_cmd_s);
}
u16
@@ -759,10 +759,10 @@
rnid_acc->specific_id_data_length =
sizeof(struct fc_rnid_general_topology_data_s);
bfa_os_assign(rnid_acc->gen_topology_data, *gen_topo_data);
- return (sizeof(struct fc_rnid_acc_s));
+ return sizeof(struct fc_rnid_acc_s);
} else {
- return (sizeof(struct fc_rnid_acc_s) -
- sizeof(struct fc_rnid_general_topology_data_s));
+ return sizeof(struct fc_rnid_acc_s) -
+ sizeof(struct fc_rnid_general_topology_data_s);
}
}
@@ -776,7 +776,7 @@
memset(rpsc, 0, sizeof(struct fc_rpsc_cmd_s));
rpsc->els_cmd.els_code = FC_ELS_RPSC;
- return (sizeof(struct fc_rpsc_cmd_s));
+ return sizeof(struct fc_rpsc_cmd_s);
}
u16
@@ -797,8 +797,8 @@
for (i = 0; i < npids; i++)
rpsc2->pid_list[i].pid = pid_list[i];
- return (sizeof(struct fc_rpsc2_cmd_s) + ((npids - 1) *
- (sizeof(u32))));
+ return sizeof(struct fc_rpsc2_cmd_s) + ((npids - 1) *
+ (sizeof(u32)));
}
u16
@@ -819,7 +819,7 @@
rpsc_acc->speed_info[0].port_op_speed =
bfa_os_htons(oper_speed->port_op_speed);
- return (sizeof(struct fc_rpsc_acc_s));
+ return sizeof(struct fc_rpsc_acc_s);
}
@@ -856,7 +856,7 @@
pdisc->port_name = port_name;
pdisc->node_name = node_name;
- return (sizeof(struct fc_logi_s));
+ return sizeof(struct fc_logi_s);
}
u16
@@ -865,21 +865,21 @@
struct fc_logi_s *pdisc = (struct fc_logi_s *) (fchs + 1);
if (len < sizeof(struct fc_logi_s))
- return (FC_PARSE_LEN_INVAL);
+ return FC_PARSE_LEN_INVAL;
if (pdisc->els_cmd.els_code != FC_ELS_ACC)
- return (FC_PARSE_ACC_INVAL);
+ return FC_PARSE_ACC_INVAL;
if (!wwn_is_equal(pdisc->port_name, port_name))
- return (FC_PARSE_PWWN_NOT_EQUAL);
+ return FC_PARSE_PWWN_NOT_EQUAL;
if (!pdisc->class3.class_valid)
- return (FC_PARSE_NWWN_NOT_EQUAL);
+ return FC_PARSE_NWWN_NOT_EQUAL;
if (bfa_os_ntohs(pdisc->class3.rxsz) < (FC_MIN_PDUSZ))
- return (FC_PARSE_RXSZ_INVAL);
+ return FC_PARSE_RXSZ_INVAL;
- return (FC_PARSE_OK);
+ return FC_PARSE_OK;
}
u16
@@ -903,7 +903,7 @@
prlo->prlo_params[page].resp_process_assc = 0;
}
- return (bfa_os_ntohs(prlo->payload_len));
+ return bfa_os_ntohs(prlo->payload_len);
}
u16
@@ -916,7 +916,7 @@
len = len;
if (prlo->command != FC_ELS_ACC)
- return (FC_PARSE_FAILURE);
+ return FC_PARSE_FAILURE;
num_pages = ((bfa_os_ntohs(prlo->payload_len)) - 4) / 16;
@@ -936,7 +936,7 @@
if (prlo->prlo_acc_params[page].resp_process_assc != 0)
return FC_PARSE_FAILURE;
}
- return (FC_PARSE_OK);
+ return FC_PARSE_OK;
}
@@ -968,7 +968,7 @@
}
}
- return (bfa_os_ntohs(tprlo->payload_len));
+ return bfa_os_ntohs(tprlo->payload_len);
}
u16
@@ -981,23 +981,23 @@
len = len;
if (tprlo->command != FC_ELS_ACC)
- return (FC_PARSE_ACC_INVAL);
+ return FC_PARSE_ACC_INVAL;
num_pages = (bfa_os_ntohs(tprlo->payload_len) - 4) / 16;
for (page = 0; page < num_pages; page++) {
if (tprlo->tprlo_acc_params[page].type != FC_TYPE_FCP)
- return (FC_PARSE_NOT_FCP);
+ return FC_PARSE_NOT_FCP;
if (tprlo->tprlo_acc_params[page].opa_valid != 0)
- return (FC_PARSE_OPAFLAG_INVAL);
+ return FC_PARSE_OPAFLAG_INVAL;
if (tprlo->tprlo_acc_params[page].rpa_valid != 0)
- return (FC_PARSE_RPAFLAG_INVAL);
+ return FC_PARSE_RPAFLAG_INVAL;
if (tprlo->tprlo_acc_params[page].orig_process_assc != 0)
- return (FC_PARSE_OPA_INVAL);
+ return FC_PARSE_OPA_INVAL;
if (tprlo->tprlo_acc_params[page].resp_process_assc != 0)
- return (FC_PARSE_RPA_INVAL);
+ return FC_PARSE_RPA_INVAL;
}
- return (FC_PARSE_OK);
+ return FC_PARSE_OK;
}
enum fc_parse_status
@@ -1024,7 +1024,7 @@
fchs->cat_info = FC_CAT_BA_RJT;
ba_rjt->reason_code = reason_code;
ba_rjt->reason_expl = reason_expl;
- return (sizeof(struct fc_ba_rjt_s));
+ return sizeof(struct fc_ba_rjt_s);
}
static void
@@ -1073,7 +1073,7 @@
bfa_os_memset(gidpn, 0, sizeof(struct fcgs_gidpn_req_s));
gidpn->port_name = port_name;
- return (sizeof(struct fcgs_gidpn_req_s) + sizeof(struct ct_hdr_s));
+ return sizeof(struct fcgs_gidpn_req_s) + sizeof(struct ct_hdr_s);
}
u16
@@ -1090,7 +1090,7 @@
bfa_os_memset(gpnid, 0, sizeof(fcgs_gpnid_req_t));
gpnid->dap = port_id;
- return (sizeof(fcgs_gpnid_req_t) + sizeof(struct ct_hdr_s));
+ return sizeof(fcgs_gpnid_req_t) + sizeof(struct ct_hdr_s);
}
u16
@@ -1107,7 +1107,7 @@
bfa_os_memset(gnnid, 0, sizeof(fcgs_gnnid_req_t));
gnnid->dap = port_id;
- return (sizeof(fcgs_gnnid_req_t) + sizeof(struct ct_hdr_s));
+ return sizeof(fcgs_gnnid_req_t) + sizeof(struct ct_hdr_s);
}
u16
@@ -1137,7 +1137,7 @@
if (set_br_reg)
scr->vu_reg_func = FC_VU_SCR_REG_FUNC_FABRIC_NAME_CHANGE;
- return (sizeof(struct fc_scr_s));
+ return sizeof(struct fc_scr_s);
}
u16
@@ -1157,7 +1157,7 @@
rscn->event[0].format = FC_RSCN_FORMAT_PORTID;
rscn->event[0].portid = s_id;
- return (sizeof(struct fc_rscn_pl_s));
+ return sizeof(struct fc_rscn_pl_s);
}
u16
@@ -1188,7 +1188,7 @@
rftid->fc4_type[index] |= bfa_os_htonl(type_value);
}
- return (sizeof(struct fcgs_rftid_req_s) + sizeof(struct ct_hdr_s));
+ return sizeof(struct fcgs_rftid_req_s) + sizeof(struct ct_hdr_s);
}
u16
@@ -1210,7 +1210,7 @@
bfa_os_memcpy((void *)rftid->fc4_type, (void *)fc4_bitmap,
(bitmap_size < 32 ? bitmap_size : 32));
- return (sizeof(struct fcgs_rftid_req_s) + sizeof(struct ct_hdr_s));
+ return sizeof(struct fcgs_rftid_req_s) + sizeof(struct ct_hdr_s);
}
u16
@@ -1231,7 +1231,7 @@
rffid->fc4ftr_bits = fc4_ftrs;
rffid->fc4_type = fc4_type;
- return (sizeof(struct fcgs_rffid_req_s) + sizeof(struct ct_hdr_s));
+ return sizeof(struct fcgs_rffid_req_s) + sizeof(struct ct_hdr_s);
}
u16
@@ -1253,7 +1253,7 @@
rspnid->spn_len = (u8) strlen((char *)name);
strncpy((char *)rspnid->spn, (char *)name, rspnid->spn_len);
- return (sizeof(struct fcgs_rspnid_req_s) + sizeof(struct ct_hdr_s));
+ return sizeof(struct fcgs_rspnid_req_s) + sizeof(struct ct_hdr_s);
}
u16
@@ -1275,7 +1275,7 @@
gidft->domain_id = 0;
gidft->area_id = 0;
- return (sizeof(struct fcgs_gidft_req_s) + sizeof(struct ct_hdr_s));
+ return sizeof(struct fcgs_gidft_req_s) + sizeof(struct ct_hdr_s);
}
u16
@@ -1294,7 +1294,7 @@
rpnid->port_id = port_id;
rpnid->port_name = port_name;
- return (sizeof(struct fcgs_rpnid_req_s) + sizeof(struct ct_hdr_s));
+ return sizeof(struct fcgs_rpnid_req_s) + sizeof(struct ct_hdr_s);
}
u16
@@ -1313,7 +1313,7 @@
rnnid->port_id = port_id;
rnnid->node_name = node_name;
- return (sizeof(struct fcgs_rnnid_req_s) + sizeof(struct ct_hdr_s));
+ return sizeof(struct fcgs_rnnid_req_s) + sizeof(struct ct_hdr_s);
}
u16
@@ -1332,7 +1332,7 @@
rcsid->port_id = port_id;
rcsid->cos = cos;
- return (sizeof(struct fcgs_rcsid_req_s) + sizeof(struct ct_hdr_s));
+ return sizeof(struct fcgs_rcsid_req_s) + sizeof(struct ct_hdr_s);
}
u16
@@ -1351,7 +1351,7 @@
rptid->port_id = port_id;
rptid->port_type = port_type;
- return (sizeof(struct fcgs_rptid_req_s) + sizeof(struct ct_hdr_s));
+ return sizeof(struct fcgs_rptid_req_s) + sizeof(struct ct_hdr_s);
}
u16
@@ -1368,7 +1368,7 @@
bfa_os_memset(ganxt, 0, sizeof(struct fcgs_ganxt_req_s));
ganxt->port_id = port_id;
- return (sizeof(struct ct_hdr_s) + sizeof(struct fcgs_ganxt_req_s));
+ return sizeof(struct ct_hdr_s) + sizeof(struct fcgs_ganxt_req_s);
}
/*
@@ -1385,7 +1385,7 @@
fc_gs_fchdr_build(fchs, d_id, s_id, 0);
fc_gs_fdmi_cthdr_build(cthdr, s_id, cmd_code);
- return (sizeof(struct ct_hdr_s));
+ return sizeof(struct ct_hdr_s);
}
/*
@@ -1425,7 +1425,7 @@
bfa_os_memset(gmal, 0, sizeof(fcgs_gmal_req_t));
gmal->wwn = wwn;
- return (sizeof(struct ct_hdr_s) + sizeof(fcgs_gmal_req_t));
+ return sizeof(struct ct_hdr_s) + sizeof(fcgs_gmal_req_t);
}
/*
@@ -1445,5 +1445,5 @@
bfa_os_memset(gfn, 0, sizeof(fcgs_gfn_req_t));
gfn->wwn = wwn;
- return (sizeof(struct ct_hdr_s) + sizeof(fcgs_gfn_req_t));
+ return sizeof(struct ct_hdr_s) + sizeof(fcgs_gfn_req_t);
}
diff --git a/drivers/scsi/bfa/fcbuild.h b/drivers/scsi/bfa/fcbuild.h
index 4d24842..8fa7f27 100644
--- a/drivers/scsi/bfa/fcbuild.h
+++ b/drivers/scsi/bfa/fcbuild.h
@@ -32,8 +32,8 @@
* Utility Macros/functions
*/
-#define fcif_sof_set(_ifhdr, _sof) (_ifhdr)->sof = FC_ ## _sof
-#define fcif_eof_set(_ifhdr, _eof) (_ifhdr)->eof = FC_ ## _eof
+#define fcif_sof_set(_ifhdr, _sof) ((_ifhdr)->sof = FC_ ## _sof)
+#define fcif_eof_set(_ifhdr, _eof) ((_ifhdr)->eof = FC_ ## _eof)
#define wwn_is_equal(_wwn1, _wwn2) \
(memcmp(&(_wwn1), &(_wwn2), sizeof(wwn_t)) == 0)
@@ -49,7 +49,7 @@
static inline u32
fc_get_ctresp_pyld_len(u32 resp_len)
{
- return (resp_len - sizeof(struct ct_hdr_s));
+ return resp_len - sizeof(struct ct_hdr_s);
}
/*
diff --git a/drivers/scsi/bfa/fcpim.c b/drivers/scsi/bfa/fcpim.c
index 8ce5d893..1f3c06e 100644
--- a/drivers/scsi/bfa/fcpim.c
+++ b/drivers/scsi/bfa/fcpim.c
@@ -286,11 +286,10 @@
bfa_sm_set_state(itnim, bfa_fcs_itnim_sm_hcb_offline);
bfa_fcb_itnim_offline(itnim->itnim_drv);
bfa_itnim_offline(itnim->bfa_itnim);
- if (bfa_fcs_port_is_online(itnim->rport->port) == BFA_TRUE) {
+ if (bfa_fcs_port_is_online(itnim->rport->port) == BFA_TRUE)
bfa_fcs_itnim_aen_post(itnim, BFA_ITNIM_AEN_DISCONNECT);
- } else {
+ else
bfa_fcs_itnim_aen_post(itnim, BFA_ITNIM_AEN_OFFLINE);
- }
break;
case BFA_FCS_ITNIM_SM_DELETE:
@@ -732,7 +731,7 @@
return NULL;
bfa_assert(rport->itnim != NULL);
- return (rport->itnim);
+ return rport->itnim;
}
bfa_status_t
diff --git a/drivers/scsi/bfa/fcs.h b/drivers/scsi/bfa/fcs.h
index deee685..8d08230 100644
--- a/drivers/scsi/bfa/fcs.h
+++ b/drivers/scsi/bfa/fcs.h
@@ -23,7 +23,7 @@
#ifndef __FCS_H__
#define __FCS_H__
-#define __fcs_min_cfg(__fcs) (__fcs)->min_cfg
+#define __fcs_min_cfg(__fcs) ((__fcs)->min_cfg)
void bfa_fcs_modexit_comp(struct bfa_fcs_s *fcs);
diff --git a/drivers/scsi/bfa/fdmi.c b/drivers/scsi/bfa/fdmi.c
index b845eb2..df2a1e5 100644
--- a/drivers/scsi/bfa/fdmi.c
+++ b/drivers/scsi/bfa/fdmi.c
@@ -72,9 +72,9 @@
struct bfa_fcs_port_fdmi_s *fdmi, u8 *pyld);
static u16 bfa_fcs_port_fdmi_build_portattr_block(
struct bfa_fcs_port_fdmi_s *fdmi, u8 *pyld);
-void bfa_fcs_fdmi_get_hbaattr(struct bfa_fcs_port_fdmi_s *fdmi,
+static void bfa_fcs_fdmi_get_hbaattr(struct bfa_fcs_port_fdmi_s *fdmi,
struct bfa_fcs_fdmi_hba_attr_s *hba_attr);
-void bfa_fcs_fdmi_get_portattr(struct bfa_fcs_port_fdmi_s *fdmi,
+static void bfa_fcs_fdmi_get_portattr(struct bfa_fcs_port_fdmi_s *fdmi,
struct bfa_fcs_fdmi_port_attr_s *port_attr);
/**
* fcs_fdmi_sm FCS FDMI state machine
@@ -1091,7 +1091,7 @@
bfa_sm_send_event(fdmi, FDMISM_EVENT_TIMEOUT);
}
-void
+static void
bfa_fcs_fdmi_get_hbaattr(struct bfa_fcs_port_fdmi_s *fdmi,
struct bfa_fcs_fdmi_hba_attr_s *hba_attr)
{
@@ -1145,7 +1145,7 @@
}
-void
+static void
bfa_fcs_fdmi_get_portattr(struct bfa_fcs_port_fdmi_s *fdmi,
struct bfa_fcs_fdmi_port_attr_s *port_attr)
{
diff --git a/drivers/scsi/bfa/include/aen/bfa_aen.h b/drivers/scsi/bfa/include/aen/bfa_aen.h
index da8cac0..d9cbc2a 100644
--- a/drivers/scsi/bfa/include/aen/bfa_aen.h
+++ b/drivers/scsi/bfa/include/aen/bfa_aen.h
@@ -54,7 +54,7 @@
static inline s32
bfa_aen_get_meminfo(void)
{
- return (sizeof(struct bfa_aen_entry_s) * bfa_aen_get_max_cfg_entry());
+ return sizeof(struct bfa_aen_entry_s) * bfa_aen_get_max_cfg_entry();
}
static inline s32
diff --git a/drivers/scsi/bfa/include/bfa.h b/drivers/scsi/bfa/include/bfa.h
index 64c1412..d4bc0d9 100644
--- a/drivers/scsi/bfa/include/bfa.h
+++ b/drivers/scsi/bfa/include/bfa.h
@@ -76,11 +76,11 @@
struct bfa_mem_elem_s meminfo[BFA_MEM_TYPE_MAX];
};
#define bfa_meminfo_kva(_m) \
- (_m)->meminfo[BFA_MEM_TYPE_KVA - 1].kva_curp
+ ((_m)->meminfo[BFA_MEM_TYPE_KVA - 1].kva_curp)
#define bfa_meminfo_dma_virt(_m) \
- (_m)->meminfo[BFA_MEM_TYPE_DMA - 1].kva_curp
+ ((_m)->meminfo[BFA_MEM_TYPE_DMA - 1].kva_curp)
#define bfa_meminfo_dma_phys(_m) \
- (_m)->meminfo[BFA_MEM_TYPE_DMA - 1].dma_curp
+ ((_m)->meminfo[BFA_MEM_TYPE_DMA - 1].dma_curp)
/**
* Generic Scatter Gather Element used by driver
@@ -100,7 +100,7 @@
/*
* bfa stats interfaces
*/
-#define bfa_stats(_mod, _stats) (_mod)->stats._stats ++
+#define bfa_stats(_mod, _stats) ((_mod)->stats._stats++)
#define bfa_ioc_get_stats(__bfa, __ioc_stats) \
bfa_ioc_fetch_stats(&(__bfa)->ioc, __ioc_stats)
@@ -136,7 +136,7 @@
void bfa_isr_disable(struct bfa_s *bfa);
void bfa_msix_getvecs(struct bfa_s *bfa, u32 *msix_vecs_bmap,
u32 *num_vecs, u32 *max_vec_bit);
-#define bfa_msix(__bfa, __vec) (__bfa)->msix.handler[__vec](__bfa, __vec)
+#define bfa_msix(__bfa, __vec) ((__bfa)->msix.handler[__vec](__bfa, __vec))
void bfa_comp_deq(struct bfa_s *bfa, struct list_head *comp_q);
void bfa_comp_process(struct bfa_s *bfa, struct list_head *comp_q);
diff --git a/drivers/scsi/bfa/include/bfa_svc.h b/drivers/scsi/bfa/include/bfa_svc.h
index 0c80b74..268d956 100644
--- a/drivers/scsi/bfa/include/bfa_svc.h
+++ b/drivers/scsi/bfa/include/bfa_svc.h
@@ -34,10 +34,10 @@
*/
struct bfa_rport_info_s {
u16 max_frmsz; /* max rcv pdu size */
- u32 pid : 24, /* remote port ID */
- lp_tag : 8;
- u32 local_pid : 24, /* local port ID */
- cisc : 8; /* CIRO supported */
+ u32 pid:24, /* remote port ID */
+ lp_tag:8;
+ u32 local_pid:24, /* local port ID */
+ cisc:8; /* CIRO supported */
u8 fc_class; /* supported FC classes. enum fc_cos */
u8 vf_en; /* virtual fabric enable */
u16 vf_id; /* virtual fabric ID */
diff --git a/drivers/scsi/bfa/include/bfi/bfi.h b/drivers/scsi/bfa/include/bfi/bfi.h
index 6cadfe0..7042c18 100644
--- a/drivers/scsi/bfa/include/bfi/bfi.h
+++ b/drivers/scsi/bfa/include/bfi/bfi.h
@@ -93,13 +93,13 @@
*/
struct bfi_sge_s {
#ifdef __BIGENDIAN
- u32 flags : 2,
- rsvd : 2,
- sg_len : 28;
+ u32 flags:2,
+ rsvd:2,
+ sg_len:28;
#else
- u32 sg_len : 28,
- rsvd : 2,
- flags : 2;
+ u32 sg_len:28,
+ rsvd:2,
+ flags:2;
#endif
union bfi_addr_u sga;
};
diff --git a/drivers/scsi/bfa/include/bfi/bfi_ioc.h b/drivers/scsi/bfa/include/bfi/bfi_ioc.h
index 026e9c0..96ef056 100644
--- a/drivers/scsi/bfa/include/bfi/bfi_ioc.h
+++ b/drivers/scsi/bfa/include/bfi/bfi_ioc.h
@@ -142,7 +142,7 @@
BFI_ADAPTER_UNSUPP = 0x400000, /* unknown adapter type */
};
-#define BFI_ADAPTER_GETP(__prop,__adap_prop) \
+#define BFI_ADAPTER_GETP(__prop, __adap_prop) \
(((__adap_prop) & BFI_ADAPTER_ ## __prop ## _MK) >> \
BFI_ADAPTER_ ## __prop ## _SH)
#define BFI_ADAPTER_SETP(__prop, __val) \
diff --git a/drivers/scsi/bfa/include/bfi/bfi_lps.h b/drivers/scsi/bfa/include/bfi/bfi_lps.h
index 414b0e3..c59d47b 100644
--- a/drivers/scsi/bfa/include/bfi/bfi_lps.h
+++ b/drivers/scsi/bfa/include/bfi/bfi_lps.h
@@ -55,8 +55,8 @@
u16 bb_credit;
u8 f_port;
u8 npiv_en;
- u32 lp_pid : 24;
- u32 auth_req : 8;
+ u32 lp_pid:24;
+ u32 auth_req:8;
mac_t lp_mac;
mac_t fcf_mac;
u8 ext_status;
diff --git a/drivers/scsi/bfa/include/bfi/bfi_rport.h b/drivers/scsi/bfa/include/bfi/bfi_rport.h
index 3520f55..e1cd83b 100644
--- a/drivers/scsi/bfa/include/bfi/bfi_rport.h
+++ b/drivers/scsi/bfa/include/bfi/bfi_rport.h
@@ -38,10 +38,10 @@
struct bfi_mhdr_s mh; /* common msg header */
u16 bfa_handle; /* host rport handle */
u16 max_frmsz; /* max rcv pdu size */
- u32 pid : 24, /* remote port ID */
- lp_tag : 8; /* local port tag */
- u32 local_pid : 24, /* local port ID */
- cisc : 8;
+ u32 pid:24, /* remote port ID */
+ lp_tag:8; /* local port tag */
+ u32 local_pid:24, /* local port ID */
+ cisc:8;
u8 fc_class; /* supported FC classes */
u8 vf_en; /* virtual fabric enable */
u16 vf_id; /* virtual fabric ID */
diff --git a/drivers/scsi/bfa/include/cs/bfa_checksum.h b/drivers/scsi/bfa/include/cs/bfa_checksum.h
index af8c1d5..650f8d0 100644
--- a/drivers/scsi/bfa/include/cs/bfa_checksum.h
+++ b/drivers/scsi/bfa/include/cs/bfa_checksum.h
@@ -31,7 +31,7 @@
for (i = 0; i < m; i++)
sum ^= buf[i];
- return (sum);
+ return sum;
}
static inline u16
@@ -43,7 +43,7 @@
for (i = 0; i < m; i++)
sum ^= buf[i];
- return (sum);
+ return sum;
}
static inline u8
@@ -55,6 +55,6 @@
for (i = 0; i < sz; i++)
sum ^= buf[i];
- return (sum);
+ return sum;
}
#endif
diff --git a/drivers/scsi/bfa/include/cs/bfa_sm.h b/drivers/scsi/bfa/include/cs/bfa_sm.h
index 9877066..b0a92ba 100644
--- a/drivers/scsi/bfa/include/cs/bfa_sm.h
+++ b/drivers/scsi/bfa/include/cs/bfa_sm.h
@@ -24,8 +24,8 @@
typedef void (*bfa_sm_t)(void *sm, int event);
-#define bfa_sm_set_state(_sm, _state) (_sm)->sm = (bfa_sm_t)(_state)
-#define bfa_sm_send_event(_sm, _event) (_sm)->sm((_sm), (_event))
+#define bfa_sm_set_state(_sm, _state) ((_sm)->sm = (bfa_sm_t)(_state))
+#define bfa_sm_send_event(_sm, _event) ((_sm)->sm((_sm), (_event)))
#define bfa_sm_get_state(_sm) ((_sm)->sm)
#define bfa_sm_cmp_state(_sm, _state) ((_sm)->sm == (bfa_sm_t)(_state))
@@ -62,7 +62,7 @@
} while (0)
#define bfa_fsm_send_event(_fsm, _event) \
- (_fsm)->fsm((_fsm), (_event))
+ ((_fsm)->fsm((_fsm), (_event)))
#define bfa_fsm_cmp_state(_fsm, _state) \
((_fsm)->fsm == (bfa_fsm_t)(_state))
diff --git a/drivers/scsi/bfa/include/cs/bfa_trc.h b/drivers/scsi/bfa/include/cs/bfa_trc.h
index 3e74392..310771c 100644
--- a/drivers/scsi/bfa/include/cs/bfa_trc.h
+++ b/drivers/scsi/bfa/include/cs/bfa_trc.h
@@ -24,7 +24,7 @@
#endif
#ifndef BFA_TRC_TS
-#define BFA_TRC_TS(_trcm) ((_trcm)->ticks ++)
+#define BFA_TRC_TS(_trcm) ((_trcm)->ticks++)
#endif
struct bfa_trc_s {
diff --git a/drivers/scsi/bfa/include/defs/bfa_defs_pport.h b/drivers/scsi/bfa/include/defs/bfa_defs_pport.h
index a000bc4..bf32041 100644
--- a/drivers/scsi/bfa/include/defs/bfa_defs_pport.h
+++ b/drivers/scsi/bfa/include/defs/bfa_defs_pport.h
@@ -61,7 +61,7 @@
* Port operational type (in sync with SNIA port type).
*/
enum bfa_pport_type {
- BFA_PPORT_TYPE_UNKNOWN = 1, /* port type is unkown */
+ BFA_PPORT_TYPE_UNKNOWN = 1, /* port type is unknown */
BFA_PPORT_TYPE_TRUNKED = 2, /* Trunked mode */
BFA_PPORT_TYPE_NPORT = 5, /* P2P with switched fabric */
BFA_PPORT_TYPE_NLPORT = 6, /* public loop */
diff --git a/drivers/scsi/bfa/include/defs/bfa_defs_tsensor.h b/drivers/scsi/bfa/include/defs/bfa_defs_tsensor.h
index 31881d2..ade763db 100644
--- a/drivers/scsi/bfa/include/defs/bfa_defs_tsensor.h
+++ b/drivers/scsi/bfa/include/defs/bfa_defs_tsensor.h
@@ -25,7 +25,7 @@
* Temperature sensor status values
*/
enum bfa_tsensor_status {
- BFA_TSENSOR_STATUS_UNKNOWN = 1, /* unkown status */
+ BFA_TSENSOR_STATUS_UNKNOWN = 1, /* unknown status */
BFA_TSENSOR_STATUS_FAULTY = 2, /* sensor is faulty */
BFA_TSENSOR_STATUS_BELOW_MIN = 3, /* temperature below mininum */
BFA_TSENSOR_STATUS_NOMINAL = 4, /* normal temperature */
diff --git a/drivers/scsi/bfa/include/fcs/bfa_fcs_fabric.h b/drivers/scsi/bfa/include/fcs/bfa_fcs_fabric.h
index 4ffd224..08b79d5 100644
--- a/drivers/scsi/bfa/include/fcs/bfa_fcs_fabric.h
+++ b/drivers/scsi/bfa/include/fcs/bfa_fcs_fabric.h
@@ -75,7 +75,7 @@
*/
};
-#define bfa_fcs_fabric_npiv_capable(__f) (__f)->is_npiv
+#define bfa_fcs_fabric_npiv_capable(__f) ((__f)->is_npiv)
#define bfa_fcs_fabric_is_switched(__f) \
((__f)->fab_type == BFA_FCS_FABRIC_SWITCHED)
diff --git a/drivers/scsi/bfa/include/fcs/bfa_fcs_lport.h b/drivers/scsi/bfa/include/fcs/bfa_fcs_lport.h
index b85cba8..967ceb0 100644
--- a/drivers/scsi/bfa/include/fcs/bfa_fcs_lport.h
+++ b/drivers/scsi/bfa/include/fcs/bfa_fcs_lport.h
@@ -125,12 +125,12 @@
struct bfa_fcs_port_s {
struct list_head qe; /* used by port/vport */
bfa_sm_t sm; /* state machine */
- struct bfa_fcs_fabric_s *fabric; /* parent fabric */
- struct bfa_port_cfg_s port_cfg; /* port configuration */
+ struct bfa_fcs_fabric_s *fabric;/* parent fabric */
+ struct bfa_port_cfg_s port_cfg;/* port configuration */
struct bfa_timer_s link_timer; /* timer for link offline */
- u32 pid : 24; /* FC address */
- u8 lp_tag; /* lport tag */
- u16 num_rports; /* Num of r-ports */
+ u32 pid:24; /* FC address */
+ u8 lp_tag; /* lport tag */
+ u16 num_rports; /* Num of r-ports */
struct list_head rport_q; /* queue of discovered r-ports */
struct bfa_fcs_s *fcs; /* FCS instance */
union bfa_fcs_port_topo_u port_topo; /* fabric/loop/n2n details */
@@ -188,13 +188,14 @@
}
-#define bfa_fcs_port_get_opertype(_lport) (_lport)->fabric->oper_type
+#define bfa_fcs_port_get_opertype(_lport) ((_lport)->fabric->oper_type)
-#define bfa_fcs_port_get_fabric_name(_lport) (_lport)->fabric->fabric_name
+#define bfa_fcs_port_get_fabric_name(_lport) ((_lport)->fabric->fabric_name)
-#define bfa_fcs_port_get_fabric_ipaddr(_lport) (_lport)->fabric->fabric_ip_addr
+#define bfa_fcs_port_get_fabric_ipaddr(_lport) \
+ ((_lport)->fabric->fabric_ip_addr)
/**
* bfa fcs port public functions
diff --git a/drivers/scsi/bfa/include/protocol/ct.h b/drivers/scsi/bfa/include/protocol/ct.h
index c59d663..b82540a 100644
--- a/drivers/scsi/bfa/include/protocol/ct.h
+++ b/drivers/scsi/bfa/include/protocol/ct.h
@@ -82,7 +82,7 @@
};
/*
- * defintions for CT reason code
+ * definitions for CT reason code
*/
enum {
CT_RSN_INV_CMD = 0x01,
@@ -129,7 +129,7 @@
};
/*
- * defintions for the explanation code for all servers
+ * definitions for the explanation code for all servers
*/
enum {
CT_EXP_AUTH_EXCEPTION = 0xF1,
@@ -193,11 +193,11 @@
#define FC_GS_FCP_FC4_FEATURE_TARGET 0x01
struct fcgs_rffid_req_s{
- u32 rsvd :8;
- u32 dap :24; /* port identifier */
- u32 rsvd1 :16;
- u32 fc4ftr_bits :8; /* fc4 feature bits */
- u32 fc4_type :8; /* corresponding FC4 Type */
+ u32 rsvd:8;
+ u32 dap:24; /* port identifier */
+ u32 rsvd1:16;
+ u32 fc4ftr_bits:8; /* fc4 feature bits */
+ u32 fc4_type:8; /* corresponding FC4 Type */
};
/**
diff --git a/drivers/scsi/bfa/include/protocol/fc.h b/drivers/scsi/bfa/include/protocol/fc.h
index 3e39ba5..14969ee 100644
--- a/drivers/scsi/bfa/include/protocol/fc.h
+++ b/drivers/scsi/bfa/include/protocol/fc.h
@@ -486,14 +486,14 @@
* see FC-PH-X table 113 & 115 for explanation also FCP table 8
*/
struct fc_prli_params_s{
- u32 reserved: 16;
+ u32 reserved:16;
#ifdef __BIGENDIAN
- u32 reserved1: 5;
- u32 rec_support : 1;
- u32 task_retry_id : 1;
- u32 retry : 1;
+ u32 reserved1:5;
+ u32 rec_support:1;
+ u32 task_retry_id:1;
+ u32 retry:1;
- u32 confirm : 1;
+ u32 confirm:1;
u32 doverlay:1;
u32 initiator:1;
u32 target:1;
@@ -502,10 +502,10 @@
u32 rxrdisab:1;
u32 wxrdisab:1;
#else
- u32 retry : 1;
- u32 task_retry_id : 1;
- u32 rec_support : 1;
- u32 reserved1: 5;
+ u32 retry:1;
+ u32 task_retry_id:1;
+ u32 rec_support:1;
+ u32 reserved1:5;
u32 wxrdisab:1;
u32 rxrdisab:1;
@@ -514,7 +514,7 @@
u32 target:1;
u32 initiator:1;
u32 doverlay:1;
- u32 confirm : 1;
+ u32 confirm:1;
#endif
};
diff --git a/drivers/scsi/bfa/loop.c b/drivers/scsi/bfa/loop.c
index a418ded..f7c7f4f 100644
--- a/drivers/scsi/bfa/loop.c
+++ b/drivers/scsi/bfa/loop.c
@@ -58,49 +58,16 @@
/*
* Local Functions
*/
-bfa_status_t bfa_fcs_port_loop_send_plogi(struct bfa_fcs_port_s *port,
- u8 alpa);
+static bfa_status_t bfa_fcs_port_loop_send_plogi(struct bfa_fcs_port_s *port,
+ u8 alpa);
-void bfa_fcs_port_loop_plogi_response(void *fcsarg,
- struct bfa_fcxp_s *fcxp,
- void *cbarg,
- bfa_status_t req_status,
- u32 rsp_len,
- u32 resid_len,
- struct fchs_s *rsp_fchs);
-
-bfa_status_t bfa_fcs_port_loop_send_adisc(struct bfa_fcs_port_s *port,
- u8 alpa);
-
-void bfa_fcs_port_loop_adisc_response(void *fcsarg,
- struct bfa_fcxp_s *fcxp,
- void *cbarg,
- bfa_status_t req_status,
- u32 rsp_len,
- u32 resid_len,
- struct fchs_s *rsp_fchs);
-
-bfa_status_t bfa_fcs_port_loop_send_plogi_acc(struct bfa_fcs_port_s *port,
- u8 alpa);
-
-void bfa_fcs_port_loop_plogi_acc_response(void *fcsarg,
- struct bfa_fcxp_s *fcxp,
- void *cbarg,
- bfa_status_t req_status,
- u32 rsp_len,
- u32 resid_len,
- struct fchs_s *rsp_fchs);
-
-bfa_status_t bfa_fcs_port_loop_send_adisc_acc(struct bfa_fcs_port_s *port,
- u8 alpa);
-
-void bfa_fcs_port_loop_adisc_acc_response(void *fcsarg,
- struct bfa_fcxp_s *fcxp,
- void *cbarg,
- bfa_status_t req_status,
- u32 rsp_len,
- u32 resid_len,
- struct fchs_s *rsp_fchs);
+static void bfa_fcs_port_loop_plogi_response(void *fcsarg,
+ struct bfa_fcxp_s *fcxp,
+ void *cbarg,
+ bfa_status_t req_status,
+ u32 rsp_len,
+ u32 resid_len,
+ struct fchs_s *rsp_fchs);
/**
* Called by port to initializar in provate LOOP topology.
*/
@@ -179,7 +146,7 @@
/**
* Local Functions.
*/
-bfa_status_t
+static bfa_status_t
bfa_fcs_port_loop_send_plogi(struct bfa_fcs_port_s *port, u8 alpa)
{
struct fchs_s fchs;
@@ -208,7 +175,7 @@
/**
* Called by fcxp to notify the Plogi response
*/
-void
+static void
bfa_fcs_port_loop_plogi_response(void *fcsarg, struct bfa_fcxp_s *fcxp,
void *cbarg, bfa_status_t req_status,
u32 rsp_len, u32 resid_len,
@@ -244,179 +211,3 @@
bfa_assert(0);
}
}
-
-bfa_status_t
-bfa_fcs_port_loop_send_plogi_acc(struct bfa_fcs_port_s *port, u8 alpa)
-{
- struct fchs_s fchs;
- struct bfa_fcxp_s *fcxp;
- int len;
-
- bfa_trc(port->fcs, alpa);
-
- fcxp = bfa_fcxp_alloc(NULL, port->fcs->bfa, 0, 0, NULL, NULL, NULL,
- NULL);
- bfa_assert(fcxp);
-
- len = fc_plogi_acc_build(&fchs, bfa_fcxp_get_reqbuf(fcxp), alpa,
- bfa_fcs_port_get_fcid(port), 0,
- port->port_cfg.pwwn, port->port_cfg.nwwn,
- bfa_pport_get_maxfrsize(port->fcs->bfa));
-
- bfa_fcxp_send(fcxp, NULL, port->fabric->vf_id, port->lp_tag, BFA_FALSE,
- FC_CLASS_3, len, &fchs,
- bfa_fcs_port_loop_plogi_acc_response,
- (void *)port, FC_MAX_PDUSZ, 0); /* No response
- * expected
- */
-
- return BFA_STATUS_OK;
-}
-
-/*
- * Plogi Acc Response
- * We donot do any processing here.
- */
-void
-bfa_fcs_port_loop_plogi_acc_response(void *fcsarg, struct bfa_fcxp_s *fcxp,
- void *cbarg, bfa_status_t req_status,
- u32 rsp_len, u32 resid_len,
- struct fchs_s *rsp_fchs)
-{
-
- struct bfa_fcs_port_s *port = (struct bfa_fcs_port_s *) cbarg;
-
- bfa_trc(port->fcs, port->pid);
-
- /*
- * Sanity Checks
- */
- if (req_status != BFA_STATUS_OK) {
- bfa_trc(port->fcs, req_status);
- return;
- }
-}
-
-bfa_status_t
-bfa_fcs_port_loop_send_adisc(struct bfa_fcs_port_s *port, u8 alpa)
-{
- struct fchs_s fchs;
- struct bfa_fcxp_s *fcxp;
- int len;
-
- bfa_trc(port->fcs, alpa);
-
- fcxp = bfa_fcxp_alloc(NULL, port->fcs->bfa, 0, 0, NULL, NULL, NULL,
- NULL);
- bfa_assert(fcxp);
-
- len = fc_adisc_build(&fchs, bfa_fcxp_get_reqbuf(fcxp), alpa,
- bfa_fcs_port_get_fcid(port), 0,
- port->port_cfg.pwwn, port->port_cfg.nwwn);
-
- bfa_fcxp_send(fcxp, NULL, port->fabric->vf_id, port->lp_tag, BFA_FALSE,
- FC_CLASS_3, len, &fchs,
- bfa_fcs_port_loop_adisc_response, (void *)port,
- FC_MAX_PDUSZ, FC_RA_TOV);
-
- return BFA_STATUS_OK;
-}
-
-/**
- * Called by fcxp to notify the ADISC response
- */
-void
-bfa_fcs_port_loop_adisc_response(void *fcsarg, struct bfa_fcxp_s *fcxp,
- void *cbarg, bfa_status_t req_status,
- u32 rsp_len, u32 resid_len,
- struct fchs_s *rsp_fchs)
-{
- struct bfa_fcs_port_s *port = (struct bfa_fcs_port_s *) cbarg;
- struct bfa_fcs_rport_s *rport;
- struct fc_adisc_s *adisc_resp;
- struct fc_els_cmd_s *els_cmd;
- u32 pid = rsp_fchs->s_id;
-
- bfa_trc(port->fcs, req_status);
-
- /*
- * Sanity Checks
- */
- if (req_status != BFA_STATUS_OK) {
- /*
- * TBD : we may need to retry certain requests
- */
- bfa_fcxp_free(fcxp);
- return;
- }
-
- els_cmd = (struct fc_els_cmd_s *) BFA_FCXP_RSP_PLD(fcxp);
- adisc_resp = (struct fc_adisc_s *) els_cmd;
-
- if (els_cmd->els_code == FC_ELS_ACC) {
- } else {
- bfa_trc(port->fcs, adisc_resp->els_cmd.els_code);
-
- /*
- * TBD: we may need to check for reject codes and retry
- */
- rport = bfa_fcs_port_get_rport_by_pid(port, pid);
- if (rport) {
- list_del(&rport->qe);
- bfa_fcs_rport_delete(rport);
- }
-
- }
- return;
-}
-
-bfa_status_t
-bfa_fcs_port_loop_send_adisc_acc(struct bfa_fcs_port_s *port, u8 alpa)
-{
- struct fchs_s fchs;
- struct bfa_fcxp_s *fcxp;
- int len;
-
- bfa_trc(port->fcs, alpa);
-
- fcxp = bfa_fcxp_alloc(NULL, port->fcs->bfa, 0, 0, NULL, NULL, NULL,
- NULL);
- bfa_assert(fcxp);
-
- len = fc_adisc_acc_build(&fchs, bfa_fcxp_get_reqbuf(fcxp), alpa,
- bfa_fcs_port_get_fcid(port), 0,
- port->port_cfg.pwwn, port->port_cfg.nwwn);
-
- bfa_fcxp_send(fcxp, NULL, port->fabric->vf_id, port->lp_tag, BFA_FALSE,
- FC_CLASS_3, len, &fchs,
- bfa_fcs_port_loop_adisc_acc_response,
- (void *)port, FC_MAX_PDUSZ, 0); /* no reponse
- * expected
- */
-
- return BFA_STATUS_OK;
-}
-
-/*
- * Adisc Acc Response
- * We donot do any processing here.
- */
-void
-bfa_fcs_port_loop_adisc_acc_response(void *fcsarg, struct bfa_fcxp_s *fcxp,
- void *cbarg, bfa_status_t req_status,
- u32 rsp_len, u32 resid_len,
- struct fchs_s *rsp_fchs)
-{
-
- struct bfa_fcs_port_s *port = (struct bfa_fcs_port_s *) cbarg;
-
- bfa_trc(port->fcs, port->pid);
-
- /*
- * Sanity Checks
- */
- if (req_status != BFA_STATUS_OK) {
- bfa_trc(port->fcs, req_status);
- return;
- }
-}
diff --git a/drivers/scsi/bfa/lport_api.c b/drivers/scsi/bfa/lport_api.c
index 8f51a83..1e06792 100644
--- a/drivers/scsi/bfa/lport_api.c
+++ b/drivers/scsi/bfa/lport_api.c
@@ -43,7 +43,7 @@
struct bfa_fcs_port_s *
bfa_fcs_get_base_port(struct bfa_fcs_s *fcs)
{
- return (&fcs->fabric.bport);
+ return &fcs->fabric.bport;
}
wwn_t
@@ -88,11 +88,10 @@
}
bfa_trc(fcs, i);
- if (rport) {
+ if (rport)
return rport->pwwn;
- } else {
+ else
return (wwn_t) 0;
- }
}
void
@@ -198,17 +197,17 @@
vf = bfa_fcs_vf_lookup(fcs, vf_id);
if (vf == NULL) {
bfa_trc(fcs, vf_id);
- return (NULL);
+ return NULL;
}
if (!lpwwn || (vf->bport.port_cfg.pwwn == lpwwn))
- return (&vf->bport);
+ return &vf->bport;
vport = bfa_fcs_fabric_vport_lookup(vf, lpwwn);
if (vport)
- return (&vport->lport);
+ return &vport->lport;
- return (NULL);
+ return NULL;
}
/*
diff --git a/drivers/scsi/bfa/ns.c b/drivers/scsi/bfa/ns.c
index 59fea99..2f8b880 100644
--- a/drivers/scsi/bfa/ns.c
+++ b/drivers/scsi/bfa/ns.c
@@ -932,11 +932,10 @@
}
ns->fcxp = fcxp;
- if (BFA_FCS_VPORT_IS_INITIATOR_MODE(ns->port)) {
+ if (BFA_FCS_VPORT_IS_INITIATOR_MODE(ns->port))
fc4_ftrs = FC_GS_FCP_FC4_FEATURE_INITIATOR;
- } else if (BFA_FCS_VPORT_IS_TARGET_MODE(ns->port)) {
+ else if (BFA_FCS_VPORT_IS_TARGET_MODE(ns->port))
fc4_ftrs = FC_GS_FCP_FC4_FEATURE_TARGET;
- }
len = fc_rffid_build(&fchs, bfa_fcxp_get_reqbuf(fcxp),
bfa_fcs_port_get_fcid(port), 0, FC_TYPE_FCP,
diff --git a/drivers/scsi/bfa/plog.c b/drivers/scsi/bfa/plog.c
index 86af818..fcb8864 100644
--- a/drivers/scsi/bfa/plog.c
+++ b/drivers/scsi/bfa/plog.c
@@ -180,5 +180,5 @@
bfa_boolean_t
bfa_plog_get_setting(struct bfa_plog_s *plog)
{
- return((bfa_boolean_t)plog->plog_enabled);
+ return (bfa_boolean_t)plog->plog_enabled;
}
diff --git a/drivers/scsi/bfa/rport_ftrs.c b/drivers/scsi/bfa/rport_ftrs.c
index 8a1f59d..e1932c8 100644
--- a/drivers/scsi/bfa/rport_ftrs.c
+++ b/drivers/scsi/bfa/rport_ftrs.c
@@ -79,7 +79,7 @@
bfa_trc(rport->fcs, event);
switch (event) {
- case RPFSM_EVENT_RPORT_ONLINE :
+ case RPFSM_EVENT_RPORT_ONLINE:
if (!BFA_FCS_PID_IS_WKA(rport->pid)) {
bfa_sm_set_state(rpf, bfa_fcs_rpf_sm_rpsc_sending);
rpf->rpsc_retries = 0;
@@ -87,7 +87,7 @@
break;
};
- case RPFSM_EVENT_RPORT_OFFLINE :
+ case RPFSM_EVENT_RPORT_OFFLINE:
break;
default:
@@ -107,7 +107,7 @@
bfa_sm_set_state(rpf, bfa_fcs_rpf_sm_rpsc);
break;
- case RPFSM_EVENT_RPORT_OFFLINE :
+ case RPFSM_EVENT_RPORT_OFFLINE:
bfa_sm_set_state(rpf, bfa_fcs_rpf_sm_offline);
bfa_fcxp_walloc_cancel(rport->fcs->bfa, &rpf->fcxp_wqe);
rpf->rpsc_retries = 0;
@@ -130,11 +130,10 @@
case RPFSM_EVENT_RPSC_COMP:
bfa_sm_set_state(rpf, bfa_fcs_rpf_sm_online);
/* Update speed info in f/w via BFA */
- if (rpf->rpsc_speed != BFA_PPORT_SPEED_UNKNOWN) {
+ if (rpf->rpsc_speed != BFA_PPORT_SPEED_UNKNOWN)
bfa_rport_speed(rport->bfa_rport, rpf->rpsc_speed);
- } else if (rpf->assigned_speed != BFA_PPORT_SPEED_UNKNOWN) {
+ else if (rpf->assigned_speed != BFA_PPORT_SPEED_UNKNOWN)
bfa_rport_speed(rport->bfa_rport, rpf->assigned_speed);
- }
break;
case RPFSM_EVENT_RPSC_FAIL:
@@ -154,7 +153,7 @@
}
break;
- case RPFSM_EVENT_RPORT_OFFLINE :
+ case RPFSM_EVENT_RPORT_OFFLINE:
bfa_sm_set_state(rpf, bfa_fcs_rpf_sm_offline);
bfa_fcxp_discard(rpf->fcxp);
rpf->rpsc_retries = 0;
@@ -174,13 +173,13 @@
bfa_trc(rport->fcs, event);
switch (event) {
- case RPFSM_EVENT_TIMEOUT :
+ case RPFSM_EVENT_TIMEOUT:
/* re-send the RPSC */
bfa_sm_set_state(rpf, bfa_fcs_rpf_sm_rpsc_sending);
bfa_fcs_rpf_send_rpsc2(rpf, NULL);
break;
- case RPFSM_EVENT_RPORT_OFFLINE :
+ case RPFSM_EVENT_RPORT_OFFLINE:
bfa_timer_stop(&rpf->timer);
bfa_sm_set_state(rpf, bfa_fcs_rpf_sm_offline);
rpf->rpsc_retries = 0;
@@ -201,7 +200,7 @@
bfa_trc(rport->fcs, event);
switch (event) {
- case RPFSM_EVENT_RPORT_OFFLINE :
+ case RPFSM_EVENT_RPORT_OFFLINE:
bfa_sm_set_state(rpf, bfa_fcs_rpf_sm_offline);
rpf->rpsc_retries = 0;
break;
@@ -221,12 +220,12 @@
bfa_trc(rport->fcs, event);
switch (event) {
- case RPFSM_EVENT_RPORT_ONLINE :
+ case RPFSM_EVENT_RPORT_ONLINE:
bfa_sm_set_state(rpf, bfa_fcs_rpf_sm_rpsc_sending);
bfa_fcs_rpf_send_rpsc2(rpf, NULL);
break;
- case RPFSM_EVENT_RPORT_OFFLINE :
+ case RPFSM_EVENT_RPORT_OFFLINE:
break;
default:
@@ -366,10 +365,9 @@
bfa_trc(rport->fcs, ls_rjt->reason_code);
bfa_trc(rport->fcs, ls_rjt->reason_code_expl);
rport->stats.rpsc_rejects++;
- if (ls_rjt->reason_code == FC_LS_RJT_RSN_CMD_NOT_SUPP) {
+ if (ls_rjt->reason_code == FC_LS_RJT_RSN_CMD_NOT_SUPP)
bfa_sm_send_event(rpf, RPFSM_EVENT_RPSC_FAIL);
- } else {
+ else
bfa_sm_send_event(rpf, RPFSM_EVENT_RPSC_ERROR);
- }
}
}
diff --git a/drivers/scsi/bfa/vfapi.c b/drivers/scsi/bfa/vfapi.c
index 31d81fe..391a479 100644
--- a/drivers/scsi/bfa/vfapi.c
+++ b/drivers/scsi/bfa/vfapi.c
@@ -189,7 +189,7 @@
{
bfa_trc(fcs, vf_id);
if (vf_id == FC_VF_ID_NULL)
- return (&fcs->fabric);
+ return &fcs->fabric;
/**
* @todo vf support
diff --git a/drivers/scsi/bfa/vport.c b/drivers/scsi/bfa/vport.c
index c10af06..e90f1e3 100644
--- a/drivers/scsi/bfa/vport.c
+++ b/drivers/scsi/bfa/vport.c
@@ -31,13 +31,13 @@
BFA_TRC_FILE(FCS, VPORT);
-#define __vport_fcs(__vp) (__vp)->lport.fcs
-#define __vport_pwwn(__vp) (__vp)->lport.port_cfg.pwwn
-#define __vport_nwwn(__vp) (__vp)->lport.port_cfg.nwwn
-#define __vport_bfa(__vp) (__vp)->lport.fcs->bfa
-#define __vport_fcid(__vp) (__vp)->lport.pid
-#define __vport_fabric(__vp) (__vp)->lport.fabric
-#define __vport_vfid(__vp) (__vp)->lport.fabric->vf_id
+#define __vport_fcs(__vp) ((__vp)->lport.fcs)
+#define __vport_pwwn(__vp) ((__vp)->lport.port_cfg.pwwn)
+#define __vport_nwwn(__vp) ((__vp)->lport.port_cfg.nwwn)
+#define __vport_bfa(__vp) ((__vp)->lport.fcs->bfa)
+#define __vport_fcid(__vp) ((__vp)->lport.pid)
+#define __vport_fabric(__vp) ((__vp)->lport.fabric)
+#define __vport_vfid(__vp) ((__vp)->lport.fabric->vf_id)
#define BFA_FCS_VPORT_MAX_RETRIES 5
/*
@@ -641,9 +641,9 @@
bfa_get_attr(fcs->bfa, &ioc_attr);
if (ioc_attr.pci_attr.device_id == BFA_PCI_DEVICE_ID_CT)
- return (BFA_FCS_MAX_VPORTS_SUPP_CT);
+ return BFA_FCS_MAX_VPORTS_SUPP_CT;
else
- return (BFA_FCS_MAX_VPORTS_SUPP_CB);
+ return BFA_FCS_MAX_VPORTS_SUPP_CB;
}
@@ -675,7 +675,7 @@
struct bfad_vport_s *vport_drv)
{
if (vport_cfg->pwwn == 0)
- return (BFA_STATUS_INVALID_WWN);
+ return BFA_STATUS_INVALID_WWN;
if (bfa_fcs_port_get_pwwn(&fcs->fabric.bport) == vport_cfg->pwwn)
return BFA_STATUS_VPORT_WWN_BP;
diff --git a/drivers/scsi/bnx2i/bnx2i.h b/drivers/scsi/bnx2i/bnx2i.h
index 5edde1a..2b973f3 100644
--- a/drivers/scsi/bnx2i/bnx2i.h
+++ b/drivers/scsi/bnx2i/bnx2i.h
@@ -232,7 +232,6 @@
struct iscsi_cls_conn *cls_conn;
struct bnx2i_hba *hba;
struct completion cmd_cleanup_cmpl;
- int is_bound;
u32 iscsi_conn_cid;
#define BNX2I_CID_RESERVED 0x5AFF
diff --git a/drivers/scsi/bnx2i/bnx2i_iscsi.c b/drivers/scsi/bnx2i/bnx2i_iscsi.c
index cafb888..132898c 100644
--- a/drivers/scsi/bnx2i/bnx2i_iscsi.c
+++ b/drivers/scsi/bnx2i/bnx2i_iscsi.c
@@ -1161,9 +1161,6 @@
struct bnx2i_cmd *cmd = task->dd_data;
struct iscsi_cmd *hdr = (struct iscsi_cmd *) task->hdr;
- if (!bnx2i_conn->is_bound)
- return -ENOTCONN;
-
/*
* If there is no scsi_cmnd this must be a mgmt task
*/
@@ -1371,7 +1368,6 @@
bnx2i_conn->ep = bnx2i_ep;
bnx2i_conn->iscsi_conn_cid = bnx2i_ep->ep_iscsi_cid;
bnx2i_conn->fw_cid = bnx2i_ep->ep_cid;
- bnx2i_conn->is_bound = 1;
ret_code = bnx2i_bind_conn_to_iscsi_cid(hba, bnx2i_conn,
bnx2i_ep->ep_iscsi_cid);
@@ -1883,7 +1879,7 @@
bnx2i_ep = ep->dd_data;
- /* driver should not attempt connection cleanup untill TCP_CONNECT
+ /* driver should not attempt connection cleanup until TCP_CONNECT
* completes either successfully or fails. Timeout is 9-secs, so
* wait for it to complete
*/
@@ -1896,9 +1892,7 @@
conn = bnx2i_conn->cls_conn->dd_data;
session = conn->session;
- spin_lock_bh(&session->lock);
- bnx2i_conn->is_bound = 0;
- spin_unlock_bh(&session->lock);
+ iscsi_suspend_queue(conn);
}
hba = bnx2i_ep->hba;
@@ -2034,7 +2028,7 @@
ISCSI_USERNAME | ISCSI_PASSWORD |
ISCSI_USERNAME_IN | ISCSI_PASSWORD_IN |
ISCSI_FAST_ABORT | ISCSI_ABORT_TMO |
- ISCSI_LU_RESET_TMO |
+ ISCSI_LU_RESET_TMO | ISCSI_TGT_RESET_TMO |
ISCSI_PING_TMO | ISCSI_RECV_TMO |
ISCSI_IFACE_NAME | ISCSI_INITIATOR_NAME,
.host_param_mask = ISCSI_HOST_HWADDRESS | ISCSI_HOST_NETDEV_NAME,
diff --git a/drivers/scsi/constants.c b/drivers/scsi/constants.c
index 63abb06..9129bcf 100644
--- a/drivers/scsi/constants.c
+++ b/drivers/scsi/constants.c
@@ -141,6 +141,7 @@
static const struct value_name_pair serv_in16_arr[] = {
{0x10, "Read capacity(16)"},
{0x11, "Read long(16)"},
+ {0x12, "Get LBA status"},
};
#define SERV_IN16_SZ ARRAY_SIZE(serv_in16_arr)
diff --git a/drivers/scsi/cxgb3i/cxgb3i_iscsi.c b/drivers/scsi/cxgb3i/cxgb3i_iscsi.c
index 2631bdd..969c831 100644
--- a/drivers/scsi/cxgb3i/cxgb3i_iscsi.c
+++ b/drivers/scsi/cxgb3i/cxgb3i_iscsi.c
@@ -937,7 +937,7 @@
ISCSI_USERNAME | ISCSI_PASSWORD |
ISCSI_USERNAME_IN | ISCSI_PASSWORD_IN |
ISCSI_FAST_ABORT | ISCSI_ABORT_TMO |
- ISCSI_LU_RESET_TMO |
+ ISCSI_LU_RESET_TMO | ISCSI_TGT_RESET_TMO |
ISCSI_PING_TMO | ISCSI_RECV_TMO |
ISCSI_IFACE_NAME | ISCSI_INITIATOR_NAME,
.host_param_mask = ISCSI_HOST_HWADDRESS | ISCSI_HOST_IPADDRESS |
diff --git a/drivers/scsi/dc395x.c b/drivers/scsi/dc395x.c
index 075e239..6c59c02 100644
--- a/drivers/scsi/dc395x.c
+++ b/drivers/scsi/dc395x.c
@@ -1509,7 +1509,7 @@
* Try anyway?
*
* We could, BUT: Sometimes the TRM_S1040 misses to produce a Selection
- * Timeout, a Disconnect or a Reselction IRQ, so we would be screwed!
+ * Timeout, a Disconnect or a Reselection IRQ, so we would be screwed!
* (This is likely to be a bug in the hardware. Obviously, most people
* only have one initiator per SCSI bus.)
* Instead let this fail and have the timer make sure the command is
diff --git a/drivers/scsi/device_handler/scsi_dh.c b/drivers/scsi/device_handler/scsi_dh.c
index 3ee1cbc..e19a1a5 100644
--- a/drivers/scsi/device_handler/scsi_dh.c
+++ b/drivers/scsi/device_handler/scsi_dh.c
@@ -226,7 +226,7 @@
* Activate a device handler
*/
if (scsi_dh->activate)
- err = scsi_dh->activate(sdev);
+ err = scsi_dh->activate(sdev, NULL, NULL);
else
err = 0;
}
@@ -304,18 +304,15 @@
sdev = to_scsi_device(dev);
if (action == BUS_NOTIFY_ADD_DEVICE) {
+ err = device_create_file(dev, &scsi_dh_state_attr);
+ /* don't care about err */
devinfo = device_handler_match(NULL, sdev);
- if (!devinfo)
- goto out;
-
- err = scsi_dh_handler_attach(sdev, devinfo);
- if (!err)
- err = device_create_file(dev, &scsi_dh_state_attr);
+ if (devinfo)
+ err = scsi_dh_handler_attach(sdev, devinfo);
} else if (action == BUS_NOTIFY_DEL_DEVICE) {
device_remove_file(dev, &scsi_dh_state_attr);
scsi_dh_handler_detach(sdev, NULL);
}
-out:
return err;
}
@@ -423,10 +420,17 @@
/*
* scsi_dh_activate - activate the path associated with the scsi_device
* corresponding to the given request queue.
- * @q - Request queue that is associated with the scsi_device to be
- * activated.
+ * Returns immediately without waiting for activation to be completed.
+ * @q - Request queue that is associated with the scsi_device to be
+ * activated.
+ * @fn - Function to be called upon completion of the activation.
+ * Function fn is called with data (below) and the error code.
+ * Function fn may be called from the same calling context. So,
+ * do not hold the lock in the caller which may be needed in fn.
+ * @data - data passed to the function fn upon completion.
+ *
*/
-int scsi_dh_activate(struct request_queue *q)
+int scsi_dh_activate(struct request_queue *q, activate_complete fn, void *data)
{
int err = 0;
unsigned long flags;
@@ -445,7 +449,7 @@
return err;
if (scsi_dh->activate)
- err = scsi_dh->activate(sdev);
+ err = scsi_dh->activate(sdev, fn, data);
put_device(&sdev->sdev_gendev);
return err;
}
diff --git a/drivers/scsi/device_handler/scsi_dh_alua.c b/drivers/scsi/device_handler/scsi_dh_alua.c
index b5cdefa..4f0d013 100644
--- a/drivers/scsi/device_handler/scsi_dh_alua.c
+++ b/drivers/scsi/device_handler/scsi_dh_alua.c
@@ -60,11 +60,17 @@
int bufflen;
unsigned char sense[SCSI_SENSE_BUFFERSIZE];
int senselen;
+ struct scsi_device *sdev;
+ activate_complete callback_fn;
+ void *callback_data;
};
#define ALUA_POLICY_SWITCH_CURRENT 0
#define ALUA_POLICY_SWITCH_ALL 1
+static char print_alua_state(int);
+static int alua_check_sense(struct scsi_device *, struct scsi_sense_hdr *);
+
static inline struct alua_dh_data *get_alua_data(struct scsi_device *sdev)
{
struct scsi_dh_data *scsi_dh_data = sdev->scsi_dh_data;
@@ -231,18 +237,71 @@
}
/*
+ * alua_stpg - Evaluate SET TARGET GROUP STATES
+ * @sdev: the device to be evaluated
+ * @state: the new target group state
+ *
+ * Send a SET TARGET GROUP STATES command to the device.
+ * We only have to test here if we should resubmit the command;
+ * any other error is assumed as a failure.
+ */
+static void stpg_endio(struct request *req, int error)
+{
+ struct alua_dh_data *h = req->end_io_data;
+ struct scsi_sense_hdr sense_hdr;
+ unsigned err = SCSI_DH_IO;
+
+ if (error || host_byte(req->errors) != DID_OK ||
+ msg_byte(req->errors) != COMMAND_COMPLETE)
+ goto done;
+
+ if (err == SCSI_DH_IO && h->senselen > 0) {
+ err = scsi_normalize_sense(h->sense, SCSI_SENSE_BUFFERSIZE,
+ &sense_hdr);
+ if (!err) {
+ err = SCSI_DH_IO;
+ goto done;
+ }
+ err = alua_check_sense(h->sdev, &sense_hdr);
+ if (err == ADD_TO_MLQUEUE) {
+ err = SCSI_DH_RETRY;
+ goto done;
+ }
+ sdev_printk(KERN_INFO, h->sdev,
+ "%s: stpg sense code: %02x/%02x/%02x\n",
+ ALUA_DH_NAME, sense_hdr.sense_key,
+ sense_hdr.asc, sense_hdr.ascq);
+ err = SCSI_DH_IO;
+ }
+ if (err == SCSI_DH_OK) {
+ h->state = TPGS_STATE_OPTIMIZED;
+ sdev_printk(KERN_INFO, h->sdev,
+ "%s: port group %02x switched to state %c\n",
+ ALUA_DH_NAME, h->group_id,
+ print_alua_state(h->state));
+ }
+done:
+ blk_put_request(req);
+ if (h->callback_fn) {
+ h->callback_fn(h->callback_data, err);
+ h->callback_fn = h->callback_data = NULL;
+ }
+ return;
+}
+
+/*
* submit_stpg - Issue a SET TARGET GROUP STATES command
- * @sdev: sdev the command should be sent to
*
* Currently we're only setting the current target port group state
* to 'active/optimized' and let the array firmware figure out
* the states of the remaining groups.
*/
-static unsigned submit_stpg(struct scsi_device *sdev, struct alua_dh_data *h)
+static unsigned submit_stpg(struct alua_dh_data *h)
{
struct request *rq;
int err = SCSI_DH_RES_TEMP_UNAVAIL;
int stpg_len = 8;
+ struct scsi_device *sdev = h->sdev;
/* Prepare the data buffer */
memset(h->buff, 0, stpg_len);
@@ -252,7 +311,7 @@
rq = get_alua_req(sdev, h->buff, stpg_len, WRITE);
if (!rq)
- goto done;
+ return SCSI_DH_RES_TEMP_UNAVAIL;
/* Prepare the command. */
rq->cmd[0] = MAINTENANCE_OUT;
@@ -266,17 +325,9 @@
rq->sense = h->sense;
memset(rq->sense, 0, SCSI_SENSE_BUFFERSIZE);
rq->sense_len = h->senselen = 0;
+ rq->end_io_data = h;
- err = blk_execute_rq(rq->q, NULL, rq, 1);
- if (err == -EIO) {
- sdev_printk(KERN_INFO, sdev,
- "%s: stpg failed with %x\n",
- ALUA_DH_NAME, rq->errors);
- h->senselen = rq->sense_len;
- err = SCSI_DH_IO;
- }
- blk_put_request(rq);
-done:
+ blk_execute_rq_nowait(rq->q, NULL, rq, 1, stpg_endio);
return err;
}
@@ -477,50 +528,6 @@
}
/*
- * alua_stpg - Evaluate SET TARGET GROUP STATES
- * @sdev: the device to be evaluated
- * @state: the new target group state
- *
- * Send a SET TARGET GROUP STATES command to the device.
- * We only have to test here if we should resubmit the command;
- * any other error is assumed as a failure.
- */
-static int alua_stpg(struct scsi_device *sdev, int state,
- struct alua_dh_data *h)
-{
- struct scsi_sense_hdr sense_hdr;
- unsigned err;
- int retry = ALUA_FAILOVER_RETRIES;
-
- retry:
- err = submit_stpg(sdev, h);
- if (err == SCSI_DH_IO && h->senselen > 0) {
- err = scsi_normalize_sense(h->sense, SCSI_SENSE_BUFFERSIZE,
- &sense_hdr);
- if (!err)
- return SCSI_DH_IO;
- err = alua_check_sense(sdev, &sense_hdr);
- if (retry > 0 && err == ADD_TO_MLQUEUE) {
- retry--;
- goto retry;
- }
- sdev_printk(KERN_INFO, sdev,
- "%s: stpg sense code: %02x/%02x/%02x\n",
- ALUA_DH_NAME, sense_hdr.sense_key,
- sense_hdr.asc, sense_hdr.ascq);
- err = SCSI_DH_IO;
- }
- if (err == SCSI_DH_OK) {
- h->state = state;
- sdev_printk(KERN_INFO, sdev,
- "%s: port group %02x switched to state %c\n",
- ALUA_DH_NAME, h->group_id,
- print_alua_state(h->state) );
- }
- return err;
-}
-
-/*
* alua_rtpg - Evaluate REPORT TARGET GROUP STATES
* @sdev: the device to be evaluated.
*
@@ -652,7 +659,8 @@
* based on a certain policy. But until we actually encounter them it
* should be okay.
*/
-static int alua_activate(struct scsi_device *sdev)
+static int alua_activate(struct scsi_device *sdev,
+ activate_complete fn, void *data)
{
struct alua_dh_data *h = get_alua_data(sdev);
int err = SCSI_DH_OK;
@@ -663,11 +671,19 @@
goto out;
}
- if (h->tpgs & TPGS_MODE_EXPLICIT && h->state != TPGS_STATE_OPTIMIZED)
- err = alua_stpg(sdev, TPGS_STATE_OPTIMIZED, h);
+ if (h->tpgs & TPGS_MODE_EXPLICIT && h->state != TPGS_STATE_OPTIMIZED) {
+ h->callback_fn = fn;
+ h->callback_data = data;
+ err = submit_stpg(h);
+ if (err == SCSI_DH_OK)
+ return 0;
+ h->callback_fn = h->callback_data = NULL;
+ }
out:
- return err;
+ if (fn)
+ fn(data, err);
+ return 0;
}
/*
@@ -745,6 +761,7 @@
h->rel_port = -1;
h->buff = h->inq;
h->bufflen = ALUA_INQUIRY_SIZE;
+ h->sdev = sdev;
err = alua_initialize(sdev, h);
if (err != SCSI_DH_OK)
diff --git a/drivers/scsi/device_handler/scsi_dh_emc.c b/drivers/scsi/device_handler/scsi_dh_emc.c
index 0cffe84..6196675 100644
--- a/drivers/scsi/device_handler/scsi_dh_emc.c
+++ b/drivers/scsi/device_handler/scsi_dh_emc.c
@@ -528,7 +528,8 @@
return err;
}
-static int clariion_activate(struct scsi_device *sdev)
+static int clariion_activate(struct scsi_device *sdev,
+ activate_complete fn, void *data)
{
struct clariion_dh_data *csdev = get_clariion_data(sdev);
int result;
@@ -559,7 +560,9 @@
csdev->port, lun_state[csdev->lun_state],
csdev->default_sp + 'A');
- return result;
+ if (fn)
+ fn(data, result);
+ return 0;
}
/*
* params - parameters in the following format
diff --git a/drivers/scsi/device_handler/scsi_dh_hp_sw.c b/drivers/scsi/device_handler/scsi_dh_hp_sw.c
index f7da753..857fdd6 100644
--- a/drivers/scsi/device_handler/scsi_dh_hp_sw.c
+++ b/drivers/scsi/device_handler/scsi_dh_hp_sw.c
@@ -39,8 +39,14 @@
unsigned char sense[SCSI_SENSE_BUFFERSIZE];
int path_state;
int retries;
+ int retry_cnt;
+ struct scsi_device *sdev;
+ activate_complete callback_fn;
+ void *callback_data;
};
+static int hp_sw_start_stop(struct hp_sw_dh_data *);
+
static inline struct hp_sw_dh_data *get_hp_sw_data(struct scsi_device *sdev)
{
struct scsi_dh_data *scsi_dh_data = sdev->scsi_dh_data;
@@ -191,19 +197,53 @@
return rc;
}
+static void start_stop_endio(struct request *req, int error)
+{
+ struct hp_sw_dh_data *h = req->end_io_data;
+ unsigned err = SCSI_DH_OK;
+
+ if (error || host_byte(req->errors) != DID_OK ||
+ msg_byte(req->errors) != COMMAND_COMPLETE) {
+ sdev_printk(KERN_WARNING, h->sdev,
+ "%s: sending start_stop_unit failed with %x\n",
+ HP_SW_NAME, req->errors);
+ err = SCSI_DH_IO;
+ goto done;
+ }
+
+ if (req->sense_len > 0) {
+ err = start_done(h->sdev, h->sense);
+ if (err == SCSI_DH_RETRY) {
+ err = SCSI_DH_IO;
+ if (--h->retry_cnt) {
+ blk_put_request(req);
+ err = hp_sw_start_stop(h);
+ if (err == SCSI_DH_OK)
+ return;
+ }
+ }
+ }
+done:
+ blk_put_request(req);
+ if (h->callback_fn) {
+ h->callback_fn(h->callback_data, err);
+ h->callback_fn = h->callback_data = NULL;
+ }
+ return;
+
+}
+
/*
* hp_sw_start_stop - Send START STOP UNIT command
* @sdev: sdev command should be sent to
*
* Sending START STOP UNIT activates the SP.
*/
-static int hp_sw_start_stop(struct scsi_device *sdev, struct hp_sw_dh_data *h)
+static int hp_sw_start_stop(struct hp_sw_dh_data *h)
{
struct request *req;
- int ret, retry;
-retry:
- req = blk_get_request(sdev->request_queue, WRITE, GFP_NOIO);
+ req = blk_get_request(h->sdev->request_queue, WRITE, GFP_ATOMIC);
if (!req)
return SCSI_DH_RES_TEMP_UNAVAIL;
@@ -217,32 +257,10 @@
req->sense = h->sense;
memset(req->sense, 0, SCSI_SENSE_BUFFERSIZE);
req->sense_len = 0;
- retry = h->retries;
+ req->end_io_data = h;
- ret = blk_execute_rq(req->q, NULL, req, 1);
- if (ret == -EIO) {
- if (req->sense_len > 0) {
- ret = start_done(sdev, h->sense);
- } else {
- sdev_printk(KERN_WARNING, sdev,
- "%s: sending start_stop_unit failed with %x\n",
- HP_SW_NAME, req->errors);
- ret = SCSI_DH_IO;
- }
- } else
- ret = SCSI_DH_OK;
-
- if (ret == SCSI_DH_RETRY) {
- if (--retry) {
- blk_put_request(req);
- goto retry;
- }
- ret = SCSI_DH_IO;
- }
-
- blk_put_request(req);
-
- return ret;
+ blk_execute_rq_nowait(req->q, NULL, req, 1, start_stop_endio);
+ return SCSI_DH_OK;
}
static int hp_sw_prep_fn(struct scsi_device *sdev, struct request *req)
@@ -268,7 +286,8 @@
* activate the passive path (and deactivate the
* previously active one).
*/
-static int hp_sw_activate(struct scsi_device *sdev)
+static int hp_sw_activate(struct scsi_device *sdev,
+ activate_complete fn, void *data)
{
int ret = SCSI_DH_OK;
struct hp_sw_dh_data *h = get_hp_sw_data(sdev);
@@ -276,14 +295,18 @@
ret = hp_sw_tur(sdev, h);
if (ret == SCSI_DH_OK && h->path_state == HP_SW_PATH_PASSIVE) {
- ret = hp_sw_start_stop(sdev, h);
+ h->retry_cnt = h->retries;
+ h->callback_fn = fn;
+ h->callback_data = data;
+ ret = hp_sw_start_stop(h);
if (ret == SCSI_DH_OK)
- sdev_printk(KERN_INFO, sdev,
- "%s: activated path\n",
- HP_SW_NAME);
+ return 0;
+ h->callback_fn = h->callback_data = NULL;
}
- return ret;
+ if (fn)
+ fn(data, ret);
+ return 0;
}
static const struct scsi_dh_devlist hp_sw_dh_data_list[] = {
@@ -326,6 +349,7 @@
h = (struct hp_sw_dh_data *) scsi_dh_data->buf;
h->path_state = HP_SW_PATH_UNINITIALIZED;
h->retries = HP_SW_RETRIES;
+ h->sdev = sdev;
ret = hp_sw_tur(sdev, h);
if (ret != SCSI_DH_OK || h->path_state == HP_SW_PATH_UNINITIALIZED)
diff --git a/drivers/scsi/device_handler/scsi_dh_rdac.c b/drivers/scsi/device_handler/scsi_dh_rdac.c
index 268189d..47cfe1c 100644
--- a/drivers/scsi/device_handler/scsi_dh_rdac.c
+++ b/drivers/scsi/device_handler/scsi_dh_rdac.c
@@ -22,6 +22,7 @@
#include <scsi/scsi.h>
#include <scsi/scsi_eh.h>
#include <scsi/scsi_dh.h>
+#include <linux/workqueue.h>
#define RDAC_NAME "rdac"
#define RDAC_RETRY_COUNT 5
@@ -138,7 +139,13 @@
} mode_select;
u8 index;
u8 array_name[ARRAY_LABEL_LEN];
+ spinlock_t ms_lock;
+ int ms_queued;
+ struct work_struct ms_work;
+ struct scsi_device *ms_sdev;
+ struct list_head ms_head;
};
+
struct c8_inquiry {
u8 peripheral_info;
u8 page_code; /* 0xC8 */
@@ -198,8 +205,17 @@
"owned (AVT mode)",
};
+struct rdac_queue_data {
+ struct list_head entry;
+ struct rdac_dh_data *h;
+ activate_complete callback_fn;
+ void *callback_data;
+};
+
static LIST_HEAD(ctlr_list);
static DEFINE_SPINLOCK(list_lock);
+static struct workqueue_struct *kmpath_rdacd;
+static void send_mode_select(struct work_struct *work);
/*
* module parameter to enable rdac debug logging.
@@ -281,7 +297,6 @@
rdac_pg->subpage_code = 0x1;
rdac_pg->page_len[0] = 0x01;
rdac_pg->page_len[1] = 0x28;
- rdac_pg->lun_table[h->lun] = 0x81;
} else {
struct rdac_pg_legacy *rdac_pg;
@@ -291,7 +306,6 @@
common = &rdac_pg->common;
rdac_pg->page_code = RDAC_PAGE_CODE_REDUNDANT_CONTROLLER;
rdac_pg->page_len = 0x68;
- rdac_pg->lun_table[h->lun] = 0x81;
}
common->rdac_mode[1] = RDAC_MODE_TRANSFER_SPECIFIED_LUNS;
common->quiescence_timeout = RDAC_QUIESCENCE_TIME;
@@ -325,6 +339,7 @@
struct rdac_controller *ctlr;
ctlr = container_of(kref, struct rdac_controller, kref);
+ flush_workqueue(kmpath_rdacd);
spin_lock(&list_lock);
list_del(&ctlr->node);
spin_unlock(&list_lock);
@@ -363,6 +378,11 @@
kref_init(&ctlr->kref);
ctlr->use_ms10 = -1;
+ ctlr->ms_queued = 0;
+ ctlr->ms_sdev = NULL;
+ spin_lock_init(&ctlr->ms_lock);
+ INIT_WORK(&ctlr->ms_work, send_mode_select);
+ INIT_LIST_HEAD(&ctlr->ms_head);
list_add(&ctlr->node, &ctlr_list);
done:
spin_unlock(&list_lock);
@@ -490,7 +510,7 @@
}
static int mode_select_handle_sense(struct scsi_device *sdev,
- unsigned char *sensebuf)
+ unsigned char *sensebuf)
{
struct scsi_sense_hdr sense_hdr;
int err = SCSI_DH_IO, ret;
@@ -533,11 +553,29 @@
return err;
}
-static int send_mode_select(struct scsi_device *sdev, struct rdac_dh_data *h)
+static void send_mode_select(struct work_struct *work)
{
+ struct rdac_controller *ctlr =
+ container_of(work, struct rdac_controller, ms_work);
struct request *rq;
+ struct scsi_device *sdev = ctlr->ms_sdev;
+ struct rdac_dh_data *h = get_rdac_data(sdev);
struct request_queue *q = sdev->request_queue;
int err, retry_cnt = RDAC_RETRY_COUNT;
+ struct rdac_queue_data *tmp, *qdata;
+ LIST_HEAD(list);
+ u8 *lun_table;
+
+ spin_lock(&ctlr->ms_lock);
+ list_splice_init(&ctlr->ms_head, &list);
+ ctlr->ms_queued = 0;
+ ctlr->ms_sdev = NULL;
+ spin_unlock(&ctlr->ms_lock);
+
+ if (ctlr->use_ms10)
+ lun_table = ctlr->mode_select.expanded.lun_table;
+ else
+ lun_table = ctlr->mode_select.legacy.lun_table;
retry:
err = SCSI_DH_RES_TEMP_UNAVAIL;
@@ -545,6 +583,10 @@
if (!rq)
goto done;
+ list_for_each_entry(qdata, &list, entry) {
+ lun_table[qdata->h->lun] = 0x81;
+ }
+
RDAC_LOG(RDAC_LOG_FAILOVER, sdev, "array %s, ctlr %d, "
"%s MODE_SELECT command",
(char *) h->ctlr->array_name, h->ctlr->index,
@@ -565,10 +607,45 @@
}
done:
- return err;
+ list_for_each_entry_safe(qdata, tmp, &list, entry) {
+ list_del(&qdata->entry);
+ if (err == SCSI_DH_OK)
+ qdata->h->state = RDAC_STATE_ACTIVE;
+ if (qdata->callback_fn)
+ qdata->callback_fn(qdata->callback_data, err);
+ kfree(qdata);
+ }
+ return;
}
-static int rdac_activate(struct scsi_device *sdev)
+static int queue_mode_select(struct scsi_device *sdev,
+ activate_complete fn, void *data)
+{
+ struct rdac_queue_data *qdata;
+ struct rdac_controller *ctlr;
+
+ qdata = kzalloc(sizeof(*qdata), GFP_KERNEL);
+ if (!qdata)
+ return SCSI_DH_RETRY;
+
+ qdata->h = get_rdac_data(sdev);
+ qdata->callback_fn = fn;
+ qdata->callback_data = data;
+
+ ctlr = qdata->h->ctlr;
+ spin_lock(&ctlr->ms_lock);
+ list_add_tail(&qdata->entry, &ctlr->ms_head);
+ if (!ctlr->ms_queued) {
+ ctlr->ms_queued = 1;
+ ctlr->ms_sdev = sdev;
+ queue_work(kmpath_rdacd, &ctlr->ms_work);
+ }
+ spin_unlock(&ctlr->ms_lock);
+ return SCSI_DH_OK;
+}
+
+static int rdac_activate(struct scsi_device *sdev,
+ activate_complete fn, void *data)
{
struct rdac_dh_data *h = get_rdac_data(sdev);
int err = SCSI_DH_OK;
@@ -577,10 +654,15 @@
if (err != SCSI_DH_OK)
goto done;
- if (h->lun_state == RDAC_LUN_UNOWNED)
- err = send_mode_select(sdev, h);
+ if (h->lun_state == RDAC_LUN_UNOWNED) {
+ err = queue_mode_select(sdev, fn, data);
+ if (err == SCSI_DH_OK)
+ return 0;
+ }
done:
- return err;
+ if (fn)
+ fn(data, err);
+ return 0;
}
static int rdac_prep_fn(struct scsi_device *sdev, struct request *req)
@@ -790,13 +872,26 @@
int r;
r = scsi_register_device_handler(&rdac_dh);
- if (r != 0)
+ if (r != 0) {
printk(KERN_ERR "Failed to register scsi device handler.");
+ goto done;
+ }
+
+ /*
+ * Create workqueue to handle mode selects for rdac
+ */
+ kmpath_rdacd = create_singlethread_workqueue("kmpath_rdacd");
+ if (!kmpath_rdacd) {
+ scsi_unregister_device_handler(&rdac_dh);
+ printk(KERN_ERR "kmpath_rdacd creation failed.\n");
+ }
+done:
return r;
}
static void __exit rdac_exit(void)
{
+ destroy_workqueue(kmpath_rdacd);
scsi_unregister_device_handler(&rdac_dh);
}
diff --git a/drivers/scsi/dmx3191d.c b/drivers/scsi/dmx3191d.c
index fa738ec..207352c 100644
--- a/drivers/scsi/dmx3191d.c
+++ b/drivers/scsi/dmx3191d.c
@@ -31,7 +31,7 @@
#include <scsi/scsi_host.h>
/*
- * Defintions for the generic 5380 driver.
+ * Definitions for the generic 5380 driver.
*/
#define AUTOSENSE
diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c
index 704b8e0..a30ffaa 100644
--- a/drivers/scsi/fcoe/fcoe.c
+++ b/drivers/scsi/fcoe/fcoe.c
@@ -66,14 +66,14 @@
DEFINE_PER_CPU(struct fcoe_percpu_s, fcoe_percpu);
/* Function Prototypes */
-static int fcoe_reset(struct Scsi_Host *shost);
+static int fcoe_reset(struct Scsi_Host *);
static int fcoe_xmit(struct fc_lport *, struct fc_frame *);
static int fcoe_rcv(struct sk_buff *, struct net_device *,
struct packet_type *, struct net_device *);
-static int fcoe_percpu_receive_thread(void *arg);
-static void fcoe_clean_pending_queue(struct fc_lport *lp);
-static void fcoe_percpu_clean(struct fc_lport *lp);
-static int fcoe_link_ok(struct fc_lport *lp);
+static int fcoe_percpu_receive_thread(void *);
+static void fcoe_clean_pending_queue(struct fc_lport *);
+static void fcoe_percpu_clean(struct fc_lport *);
+static int fcoe_link_ok(struct fc_lport *);
static struct fc_lport *fcoe_hostlist_lookup(const struct net_device *);
static int fcoe_hostlist_add(const struct fc_lport *);
@@ -82,15 +82,69 @@
static int fcoe_device_notification(struct notifier_block *, ulong, void *);
static void fcoe_dev_setup(void);
static void fcoe_dev_cleanup(void);
-static struct fcoe_interface *
- fcoe_hostlist_lookup_port(const struct net_device *dev);
+static struct fcoe_interface
+*fcoe_hostlist_lookup_port(const struct net_device *);
-/* notification function from net device */
+static int fcoe_fip_recv(struct sk_buff *, struct net_device *,
+ struct packet_type *, struct net_device *);
+
+static void fcoe_fip_send(struct fcoe_ctlr *, struct sk_buff *);
+static void fcoe_update_src_mac(struct fc_lport *, u8 *);
+static u8 *fcoe_get_src_mac(struct fc_lport *);
+static void fcoe_destroy_work(struct work_struct *);
+
+static int fcoe_ddp_setup(struct fc_lport *, u16, struct scatterlist *,
+ unsigned int);
+static int fcoe_ddp_done(struct fc_lport *, u16);
+
+static int fcoe_cpu_callback(struct notifier_block *, unsigned long, void *);
+
+static int fcoe_create(const char *, struct kernel_param *);
+static int fcoe_destroy(const char *, struct kernel_param *);
+
+static struct fc_seq *fcoe_elsct_send(struct fc_lport *,
+ u32 did, struct fc_frame *,
+ unsigned int op,
+ void (*resp)(struct fc_seq *,
+ struct fc_frame *,
+ void *),
+ void *, u32 timeout);
+static void fcoe_recv_frame(struct sk_buff *skb);
+
+static void fcoe_get_lesb(struct fc_lport *, struct fc_els_lesb *);
+
+module_param_call(create, fcoe_create, NULL, NULL, S_IWUSR);
+__MODULE_PARM_TYPE(create, "string");
+MODULE_PARM_DESC(create, "Create fcoe fcoe using net device passed in.");
+module_param_call(destroy, fcoe_destroy, NULL, NULL, S_IWUSR);
+__MODULE_PARM_TYPE(destroy, "string");
+MODULE_PARM_DESC(destroy, "Destroy fcoe fcoe");
+
+/* notification function for packets from net device */
static struct notifier_block fcoe_notifier = {
.notifier_call = fcoe_device_notification,
};
-static struct scsi_transport_template *scsi_transport_fcoe_sw;
+/* notification function for CPU hotplug events */
+static struct notifier_block fcoe_cpu_notifier = {
+ .notifier_call = fcoe_cpu_callback,
+};
+
+static struct scsi_transport_template *fcoe_transport_template;
+static struct scsi_transport_template *fcoe_vport_transport_template;
+
+static int fcoe_vport_destroy(struct fc_vport *);
+static int fcoe_vport_create(struct fc_vport *, bool disabled);
+static int fcoe_vport_disable(struct fc_vport *, bool disable);
+static void fcoe_set_vport_symbolic_name(struct fc_vport *);
+
+static struct libfc_function_template fcoe_libfc_fcn_templ = {
+ .frame_send = fcoe_xmit,
+ .ddp_setup = fcoe_ddp_setup,
+ .ddp_done = fcoe_ddp_done,
+ .elsct_send = fcoe_elsct_send,
+ .get_lesb = fcoe_get_lesb,
+};
struct fc_function_template fcoe_transport_function = {
.show_host_node_name = 1,
@@ -123,6 +177,48 @@
.issue_fc_host_lip = fcoe_reset,
.terminate_rport_io = fc_rport_terminate_io,
+
+ .vport_create = fcoe_vport_create,
+ .vport_delete = fcoe_vport_destroy,
+ .vport_disable = fcoe_vport_disable,
+ .set_vport_symbolic_name = fcoe_set_vport_symbolic_name,
+
+ .bsg_request = fc_lport_bsg_request,
+};
+
+struct fc_function_template fcoe_vport_transport_function = {
+ .show_host_node_name = 1,
+ .show_host_port_name = 1,
+ .show_host_supported_classes = 1,
+ .show_host_supported_fc4s = 1,
+ .show_host_active_fc4s = 1,
+ .show_host_maxframe_size = 1,
+
+ .show_host_port_id = 1,
+ .show_host_supported_speeds = 1,
+ .get_host_speed = fc_get_host_speed,
+ .show_host_speed = 1,
+ .show_host_port_type = 1,
+ .get_host_port_state = fc_get_host_port_state,
+ .show_host_port_state = 1,
+ .show_host_symbolic_name = 1,
+
+ .dd_fcrport_size = sizeof(struct fc_rport_libfc_priv),
+ .show_rport_maxframe_size = 1,
+ .show_rport_supported_classes = 1,
+
+ .show_host_fabric_name = 1,
+ .show_starget_node_name = 1,
+ .show_starget_port_name = 1,
+ .show_starget_port_id = 1,
+ .set_rport_dev_loss_tmo = fc_set_rport_loss_tmo,
+ .show_rport_dev_loss_tmo = 1,
+ .get_fc_host_stats = fc_get_host_stats,
+ .issue_fc_host_lip = fcoe_reset,
+
+ .terminate_rport_io = fc_rport_terminate_io,
+
+ .bsg_request = fc_lport_bsg_request,
};
static struct scsi_host_template fcoe_shost_template = {
@@ -137,20 +233,17 @@
.change_queue_depth = fc_change_queue_depth,
.change_queue_type = fc_change_queue_type,
.this_id = -1,
- .cmd_per_lun = 32,
+ .cmd_per_lun = 3,
.can_queue = FCOE_MAX_OUTSTANDING_COMMANDS,
.use_clustering = ENABLE_CLUSTERING,
.sg_tablesize = SG_ALL,
.max_sectors = 0xffff,
};
-static int fcoe_fip_recv(struct sk_buff *skb, struct net_device *dev,
- struct packet_type *ptype,
- struct net_device *orig_dev);
/**
- * fcoe_interface_setup()
- * @fcoe: new fcoe_interface
- * @netdev : ptr to the associated netdevice struct
+ * fcoe_interface_setup() - Setup a FCoE interface
+ * @fcoe: The new FCoE interface
+ * @netdev: The net device that the fcoe interface is on
*
* Returns : 0 for success
* Locking: must be called with the RTNL mutex held
@@ -160,23 +253,36 @@
{
struct fcoe_ctlr *fip = &fcoe->ctlr;
struct netdev_hw_addr *ha;
+ struct net_device *real_dev;
u8 flogi_maddr[ETH_ALEN];
+ const struct net_device_ops *ops;
fcoe->netdev = netdev;
+ /* Let LLD initialize for FCoE */
+ ops = netdev->netdev_ops;
+ if (ops->ndo_fcoe_enable) {
+ if (ops->ndo_fcoe_enable(netdev))
+ FCOE_NETDEV_DBG(netdev, "Failed to enable FCoE"
+ " specific feature for LLD.\n");
+ }
+
/* Do not support for bonding device */
if ((netdev->priv_flags & IFF_MASTER_ALB) ||
(netdev->priv_flags & IFF_SLAVE_INACTIVE) ||
(netdev->priv_flags & IFF_MASTER_8023AD)) {
+ FCOE_NETDEV_DBG(netdev, "Bonded interfaces not supported\n");
return -EOPNOTSUPP;
}
/* look for SAN MAC address, if multiple SAN MACs exist, only
* use the first one for SPMA */
+ real_dev = (netdev->priv_flags & IFF_802_1Q_VLAN) ?
+ vlan_dev_real_dev(netdev) : netdev;
rcu_read_lock();
- for_each_dev_addr(netdev, ha) {
+ for_each_dev_addr(real_dev, ha) {
if ((ha->type == NETDEV_HW_ADDR_T_SAN) &&
- (is_valid_ether_addr(fip->ctl_src_addr))) {
+ (is_valid_ether_addr(ha->addr))) {
memcpy(fip->ctl_src_addr, ha->addr, ETH_ALEN);
fip->spma = 1;
break;
@@ -216,19 +322,16 @@
return 0;
}
-static void fcoe_fip_send(struct fcoe_ctlr *fip, struct sk_buff *skb);
-static void fcoe_update_src_mac(struct fcoe_ctlr *fip, u8 *old, u8 *new);
-static void fcoe_destroy_work(struct work_struct *work);
-
/**
- * fcoe_interface_create()
- * @netdev: network interface
+ * fcoe_interface_create() - Create a FCoE interface on a net device
+ * @netdev: The net device to create the FCoE interface on
*
* Returns: pointer to a struct fcoe_interface or NULL on error
*/
static struct fcoe_interface *fcoe_interface_create(struct net_device *netdev)
{
struct fcoe_interface *fcoe;
+ int err;
fcoe = kzalloc(sizeof(*fcoe), GFP_KERNEL);
if (!fcoe) {
@@ -245,15 +348,22 @@
fcoe_ctlr_init(&fcoe->ctlr);
fcoe->ctlr.send = fcoe_fip_send;
fcoe->ctlr.update_mac = fcoe_update_src_mac;
+ fcoe->ctlr.get_src_addr = fcoe_get_src_mac;
- fcoe_interface_setup(fcoe, netdev);
+ err = fcoe_interface_setup(fcoe, netdev);
+ if (err) {
+ fcoe_ctlr_destroy(&fcoe->ctlr);
+ kfree(fcoe);
+ dev_put(netdev);
+ return NULL;
+ }
return fcoe;
}
/**
- * fcoe_interface_cleanup() - clean up netdev configurations
- * @fcoe:
+ * fcoe_interface_cleanup() - Clean up a FCoE interface
+ * @fcoe: The FCoE interface to be cleaned up
*
* Caller must be holding the RTNL mutex
*/
@@ -262,6 +372,7 @@
struct net_device *netdev = fcoe->netdev;
struct fcoe_ctlr *fip = &fcoe->ctlr;
u8 flogi_maddr[ETH_ALEN];
+ const struct net_device_ops *ops;
/*
* Don't listen for Ethernet packets anymore.
@@ -276,16 +387,22 @@
/* Delete secondary MAC addresses */
memcpy(flogi_maddr, (u8[6]) FC_FCOE_FLOGI_MAC, ETH_ALEN);
dev_unicast_delete(netdev, flogi_maddr);
- if (!is_zero_ether_addr(fip->data_src_addr))
- dev_unicast_delete(netdev, fip->data_src_addr);
if (fip->spma)
dev_unicast_delete(netdev, fip->ctl_src_addr);
dev_mc_delete(netdev, FIP_ALL_ENODE_MACS, ETH_ALEN, 0);
+
+ /* Tell the LLD we are done w/ FCoE */
+ ops = netdev->netdev_ops;
+ if (ops->ndo_fcoe_disable) {
+ if (ops->ndo_fcoe_disable(netdev))
+ FCOE_NETDEV_DBG(netdev, "Failed to disable FCoE"
+ " specific feature for LLD.\n");
+ }
}
/**
* fcoe_interface_release() - fcoe_port kref release function
- * @kref: embedded reference count in an fcoe_interface struct
+ * @kref: Embedded reference count in an fcoe_interface struct
*/
static void fcoe_interface_release(struct kref *kref)
{
@@ -301,8 +418,8 @@
}
/**
- * fcoe_interface_get()
- * @fcoe:
+ * fcoe_interface_get() - Get a reference to a FCoE interface
+ * @fcoe: The FCoE interface to be held
*/
static inline void fcoe_interface_get(struct fcoe_interface *fcoe)
{
@@ -310,8 +427,8 @@
}
/**
- * fcoe_interface_put()
- * @fcoe:
+ * fcoe_interface_put() - Put a reference to a FCoE interface
+ * @fcoe: The FCoE interface to be released
*/
static inline void fcoe_interface_put(struct fcoe_interface *fcoe)
{
@@ -319,15 +436,16 @@
}
/**
- * fcoe_fip_recv - handle a received FIP frame.
- * @skb: the receive skb
- * @dev: associated &net_device
- * @ptype: the &packet_type structure which was used to register this handler.
- * @orig_dev: original receive &net_device, in case @dev is a bond.
+ * fcoe_fip_recv() - Handler for received FIP frames
+ * @skb: The receive skb
+ * @netdev: The associated net device
+ * @ptype: The packet_type structure which was used to register this handler
+ * @orig_dev: The original net_device the the skb was received on.
+ * (in case dev is a bond)
*
* Returns: 0 for success
*/
-static int fcoe_fip_recv(struct sk_buff *skb, struct net_device *dev,
+static int fcoe_fip_recv(struct sk_buff *skb, struct net_device *netdev,
struct packet_type *ptype,
struct net_device *orig_dev)
{
@@ -339,9 +457,9 @@
}
/**
- * fcoe_fip_send() - send an Ethernet-encapsulated FIP frame.
- * @fip: FCoE controller.
- * @skb: FIP Packet.
+ * fcoe_fip_send() - Send an Ethernet-encapsulated FIP frame
+ * @fip: The FCoE controller
+ * @skb: The FIP packet to be sent
*/
static void fcoe_fip_send(struct fcoe_ctlr *fip, struct sk_buff *skb)
{
@@ -350,88 +468,101 @@
}
/**
- * fcoe_update_src_mac() - Update Ethernet MAC filters.
- * @fip: FCoE controller.
- * @old: Unicast MAC address to delete if the MAC is non-zero.
- * @new: Unicast MAC address to add.
+ * fcoe_update_src_mac() - Update the Ethernet MAC filters
+ * @lport: The local port to update the source MAC on
+ * @addr: Unicast MAC address to add
*
* Remove any previously-set unicast MAC filter.
* Add secondary FCoE MAC address filter for our OUI.
*/
-static void fcoe_update_src_mac(struct fcoe_ctlr *fip, u8 *old, u8 *new)
+static void fcoe_update_src_mac(struct fc_lport *lport, u8 *addr)
{
- struct fcoe_interface *fcoe;
+ struct fcoe_port *port = lport_priv(lport);
+ struct fcoe_interface *fcoe = port->fcoe;
- fcoe = fcoe_from_ctlr(fip);
rtnl_lock();
- if (!is_zero_ether_addr(old))
- dev_unicast_delete(fcoe->netdev, old);
- dev_unicast_add(fcoe->netdev, new);
+ if (!is_zero_ether_addr(port->data_src_addr))
+ dev_unicast_delete(fcoe->netdev, port->data_src_addr);
+ if (!is_zero_ether_addr(addr))
+ dev_unicast_add(fcoe->netdev, addr);
+ memcpy(port->data_src_addr, addr, ETH_ALEN);
rtnl_unlock();
}
/**
- * fcoe_lport_config() - sets up the fc_lport
- * @lp: ptr to the fc_lport
+ * fcoe_get_src_mac() - return the Ethernet source address for an lport
+ * @lport: libfc lport
+ */
+static u8 *fcoe_get_src_mac(struct fc_lport *lport)
+{
+ struct fcoe_port *port = lport_priv(lport);
+
+ return port->data_src_addr;
+}
+
+/**
+ * fcoe_lport_config() - Set up a local port
+ * @lport: The local port to be setup
*
* Returns: 0 for success
*/
-static int fcoe_lport_config(struct fc_lport *lp)
+static int fcoe_lport_config(struct fc_lport *lport)
{
- lp->link_up = 0;
- lp->qfull = 0;
- lp->max_retry_count = 3;
- lp->max_rport_retry_count = 3;
- lp->e_d_tov = 2 * 1000; /* FC-FS default */
- lp->r_a_tov = 2 * 2 * 1000;
- lp->service_params = (FCP_SPPF_INIT_FCN | FCP_SPPF_RD_XRDY_DIS |
- FCP_SPPF_RETRY | FCP_SPPF_CONF_COMPL);
+ lport->link_up = 0;
+ lport->qfull = 0;
+ lport->max_retry_count = 3;
+ lport->max_rport_retry_count = 3;
+ lport->e_d_tov = 2 * 1000; /* FC-FS default */
+ lport->r_a_tov = 2 * 2 * 1000;
+ lport->service_params = (FCP_SPPF_INIT_FCN | FCP_SPPF_RD_XRDY_DIS |
+ FCP_SPPF_RETRY | FCP_SPPF_CONF_COMPL);
+ lport->does_npiv = 1;
- fc_lport_init_stats(lp);
+ fc_lport_init_stats(lport);
/* lport fc_lport related configuration */
- fc_lport_config(lp);
+ fc_lport_config(lport);
/* offload related configuration */
- lp->crc_offload = 0;
- lp->seq_offload = 0;
- lp->lro_enabled = 0;
- lp->lro_xid = 0;
- lp->lso_max = 0;
+ lport->crc_offload = 0;
+ lport->seq_offload = 0;
+ lport->lro_enabled = 0;
+ lport->lro_xid = 0;
+ lport->lso_max = 0;
return 0;
}
/**
- * fcoe_queue_timer() - fcoe queue timer
- * @lp: the fc_lport pointer
+ * fcoe_queue_timer() - The fcoe queue timer
+ * @lport: The local port
*
* Calls fcoe_check_wait_queue on timeout
- *
*/
-static void fcoe_queue_timer(ulong lp)
+static void fcoe_queue_timer(ulong lport)
{
- fcoe_check_wait_queue((struct fc_lport *)lp, NULL);
+ fcoe_check_wait_queue((struct fc_lport *)lport, NULL);
}
/**
- * fcoe_netdev_config() - Set up netdev for SW FCoE
- * @lp : ptr to the fc_lport
- * @netdev : ptr to the associated netdevice struct
+ * fcoe_netdev_config() - Set up net devive for SW FCoE
+ * @lport: The local port that is associated with the net device
+ * @netdev: The associated net device
*
- * Must be called after fcoe_lport_config() as it will use lport mutex
+ * Must be called after fcoe_lport_config() as it will use local port mutex
*
- * Returns : 0 for success
+ * Returns: 0 for success
*/
-static int fcoe_netdev_config(struct fc_lport *lp, struct net_device *netdev)
+static int fcoe_netdev_config(struct fc_lport *lport, struct net_device *netdev)
{
u32 mfs;
u64 wwnn, wwpn;
struct fcoe_interface *fcoe;
struct fcoe_port *port;
+ int vid = 0;
/* Setup lport private data to point to fcoe softc */
- port = lport_priv(lp);
+ port = lport_priv(lport);
fcoe = port->fcoe;
/*
@@ -439,86 +570,112 @@
* user-configured limit. If the MFS is too low, fcoe_link_ok()
* will return 0, so do this first.
*/
- mfs = netdev->mtu - (sizeof(struct fcoe_hdr) +
- sizeof(struct fcoe_crc_eof));
- if (fc_set_mfs(lp, mfs))
+ mfs = netdev->mtu;
+ if (netdev->features & NETIF_F_FCOE_MTU) {
+ mfs = FCOE_MTU;
+ FCOE_NETDEV_DBG(netdev, "Supports FCOE_MTU of %d bytes\n", mfs);
+ }
+ mfs -= (sizeof(struct fcoe_hdr) + sizeof(struct fcoe_crc_eof));
+ if (fc_set_mfs(lport, mfs))
return -EINVAL;
/* offload features support */
if (netdev->features & NETIF_F_SG)
- lp->sg_supp = 1;
+ lport->sg_supp = 1;
if (netdev->features & NETIF_F_FCOE_CRC) {
- lp->crc_offload = 1;
+ lport->crc_offload = 1;
FCOE_NETDEV_DBG(netdev, "Supports FCCRC offload\n");
}
if (netdev->features & NETIF_F_FSO) {
- lp->seq_offload = 1;
- lp->lso_max = netdev->gso_max_size;
+ lport->seq_offload = 1;
+ lport->lso_max = netdev->gso_max_size;
FCOE_NETDEV_DBG(netdev, "Supports LSO for max len 0x%x\n",
- lp->lso_max);
+ lport->lso_max);
}
if (netdev->fcoe_ddp_xid) {
- lp->lro_enabled = 1;
- lp->lro_xid = netdev->fcoe_ddp_xid;
+ lport->lro_enabled = 1;
+ lport->lro_xid = netdev->fcoe_ddp_xid;
FCOE_NETDEV_DBG(netdev, "Supports LRO for max xid 0x%x\n",
- lp->lro_xid);
+ lport->lro_xid);
}
skb_queue_head_init(&port->fcoe_pending_queue);
port->fcoe_pending_queue_active = 0;
- setup_timer(&port->timer, fcoe_queue_timer, (unsigned long)lp);
+ setup_timer(&port->timer, fcoe_queue_timer, (unsigned long)lport);
- wwnn = fcoe_wwn_from_mac(netdev->dev_addr, 1, 0);
- fc_set_wwnn(lp, wwnn);
- /* XXX - 3rd arg needs to be vlan id */
- wwpn = fcoe_wwn_from_mac(netdev->dev_addr, 2, 0);
- fc_set_wwpn(lp, wwpn);
+ if (!lport->vport) {
+ /*
+ * Use NAA 1&2 (FC-FS Rev. 2.0, Sec. 15) to generate WWNN/WWPN:
+ * For WWNN, we use NAA 1 w/ bit 27-16 of word 0 as 0.
+ * For WWPN, we use NAA 2 w/ bit 27-16 of word 0 from VLAN ID
+ */
+ if (netdev->priv_flags & IFF_802_1Q_VLAN)
+ vid = vlan_dev_vlan_id(netdev);
+ wwnn = fcoe_wwn_from_mac(fcoe->ctlr.ctl_src_addr, 1, 0);
+ fc_set_wwnn(lport, wwnn);
+ wwpn = fcoe_wwn_from_mac(fcoe->ctlr.ctl_src_addr, 2, vid);
+ fc_set_wwpn(lport, wwpn);
+ }
return 0;
}
/**
- * fcoe_shost_config() - Sets up fc_lport->host
- * @lp : ptr to the fc_lport
- * @shost : ptr to the associated scsi host
- * @dev : device associated to scsi host
+ * fcoe_shost_config() - Set up the SCSI host associated with a local port
+ * @lport: The local port
+ * @shost: The SCSI host to associate with the local port
+ * @dev: The device associated with the SCSI host
*
* Must be called after fcoe_lport_config() and fcoe_netdev_config()
*
- * Returns : 0 for success
+ * Returns: 0 for success
*/
-static int fcoe_shost_config(struct fc_lport *lp, struct Scsi_Host *shost,
- struct device *dev)
+static int fcoe_shost_config(struct fc_lport *lport, struct Scsi_Host *shost,
+ struct device *dev)
{
int rc = 0;
/* lport scsi host config */
- lp->host = shost;
-
- lp->host->max_lun = FCOE_MAX_LUN;
- lp->host->max_id = FCOE_MAX_FCP_TARGET;
- lp->host->max_channel = 0;
- lp->host->transportt = scsi_transport_fcoe_sw;
+ lport->host->max_lun = FCOE_MAX_LUN;
+ lport->host->max_id = FCOE_MAX_FCP_TARGET;
+ lport->host->max_channel = 0;
+ if (lport->vport)
+ lport->host->transportt = fcoe_vport_transport_template;
+ else
+ lport->host->transportt = fcoe_transport_template;
/* add the new host to the SCSI-ml */
- rc = scsi_add_host(lp->host, dev);
+ rc = scsi_add_host(lport->host, dev);
if (rc) {
- FCOE_NETDEV_DBG(fcoe_netdev(lp), "fcoe_shost_config: "
+ FCOE_NETDEV_DBG(fcoe_netdev(lport), "fcoe_shost_config: "
"error on scsi_add_host\n");
return rc;
}
- sprintf(fc_host_symbolic_name(lp->host), "%s v%s over %s",
- FCOE_NAME, FCOE_VERSION,
- fcoe_netdev(lp)->name);
+
+ if (!lport->vport)
+ fc_host_max_npiv_vports(lport->host) = USHORT_MAX;
+
+ snprintf(fc_host_symbolic_name(lport->host), FC_SYMBOLIC_NAME_SIZE,
+ "%s v%s over %s", FCOE_NAME, FCOE_VERSION,
+ fcoe_netdev(lport)->name);
return 0;
}
-/*
- * fcoe_oem_match() - match for read types IO
- * @fp: the fc_frame for new IO.
+/**
+ * fcoe_oem_match() - The match routine for the offloaded exchange manager
+ * @fp: The I/O frame
*
- * Returns : true for read types IO, otherwise returns false.
+ * This routine will be associated with an exchange manager (EM). When
+ * the libfc exchange handling code is looking for an EM to use it will
+ * call this routine and pass it the frame that it wishes to send. This
+ * routine will return True if the associated EM is to be used and False
+ * if the echange code should continue looking for an EM.
+ *
+ * The offload EM that this routine is associated with will handle any
+ * packets that are for SCSI read requests.
+ *
+ * Returns: True for read types I/O, otherwise returns false.
*/
bool fcoe_oem_match(struct fc_frame *fp)
{
@@ -527,14 +684,14 @@
}
/**
- * fcoe_em_config() - allocates em for this lport
- * @lp: the fcoe that em is to allocated for
+ * fcoe_em_config() - Allocate and configure an exchange manager
+ * @lport: The local port that the new EM will be associated with
*
- * Returns : 0 on success
+ * Returns: 0 on success
*/
-static inline int fcoe_em_config(struct fc_lport *lp)
+static inline int fcoe_em_config(struct fc_lport *lport)
{
- struct fcoe_port *port = lport_priv(lp);
+ struct fcoe_port *port = lport_priv(lport);
struct fcoe_interface *fcoe = port->fcoe;
struct fcoe_interface *oldfcoe = NULL;
struct net_device *old_real_dev, *cur_real_dev;
@@ -545,8 +702,9 @@
* Check if need to allocate an em instance for
* offload exchange ids to be shared across all VN_PORTs/lport.
*/
- if (!lp->lro_enabled || !lp->lro_xid || (lp->lro_xid >= max_xid)) {
- lp->lro_xid = 0;
+ if (!lport->lro_enabled || !lport->lro_xid ||
+ (lport->lro_xid >= max_xid)) {
+ lport->lro_xid = 0;
goto skip_oem;
}
@@ -572,16 +730,16 @@
}
if (fcoe->oem) {
- if (!fc_exch_mgr_add(lp, fcoe->oem, fcoe_oem_match)) {
+ if (!fc_exch_mgr_add(lport, fcoe->oem, fcoe_oem_match)) {
printk(KERN_ERR "fcoe_em_config: failed to add "
"offload em:%p on interface:%s\n",
fcoe->oem, fcoe->netdev->name);
return -ENOMEM;
}
} else {
- fcoe->oem = fc_exch_mgr_alloc(lp, FC_CLASS_3,
- FCOE_MIN_XID, lp->lro_xid,
- fcoe_oem_match);
+ fcoe->oem = fc_exch_mgr_alloc(lport, FC_CLASS_3,
+ FCOE_MIN_XID, lport->lro_xid,
+ fcoe_oem_match);
if (!fcoe->oem) {
printk(KERN_ERR "fcoe_em_config: failed to allocate "
"em for offload exches on interface:%s\n",
@@ -593,10 +751,10 @@
/*
* Exclude offload EM xid range from next EM xid range.
*/
- min_xid += lp->lro_xid + 1;
+ min_xid += lport->lro_xid + 1;
skip_oem:
- if (!fc_exch_mgr_alloc(lp, FC_CLASS_3, min_xid, max_xid, NULL)) {
+ if (!fc_exch_mgr_alloc(lport, FC_CLASS_3, min_xid, max_xid, NULL)) {
printk(KERN_ERR "fcoe_em_config: failed to "
"allocate em on interface %s\n", fcoe->netdev->name);
return -ENOMEM;
@@ -606,8 +764,8 @@
}
/**
- * fcoe_if_destroy() - FCoE software HBA tear-down function
- * @lport: fc_lport to destroy
+ * fcoe_if_destroy() - Tear down a SW FCoE instance
+ * @lport: The local port to be destroyed
*/
static void fcoe_if_destroy(struct fc_lport *lport)
{
@@ -630,6 +788,11 @@
/* Free existing transmit skbs */
fcoe_clean_pending_queue(lport);
+ rtnl_lock();
+ if (!is_zero_ether_addr(port->data_src_addr))
+ dev_unicast_delete(netdev, port->data_src_addr);
+ rtnl_unlock();
+
/* receives may not be stopped until after this */
fcoe_interface_put(fcoe);
@@ -650,82 +813,89 @@
scsi_host_put(lport->host);
}
-/*
- * fcoe_ddp_setup - calls LLD's ddp_setup through net_device
- * @lp: the corresponding fc_lport
- * @xid: the exchange id for this ddp transfer
- * @sgl: the scatterlist describing this transfer
- * @sgc: number of sg items
+/**
+ * fcoe_ddp_setup() - Call a LLD's ddp_setup through the net device
+ * @lport: The local port to setup DDP for
+ * @xid: The exchange ID for this DDP transfer
+ * @sgl: The scatterlist describing this transfer
+ * @sgc: The number of sg items
*
- * Returns : 0 no ddp
+ * Returns: 0 if the DDP context was not configured
*/
-static int fcoe_ddp_setup(struct fc_lport *lp, u16 xid,
- struct scatterlist *sgl, unsigned int sgc)
+static int fcoe_ddp_setup(struct fc_lport *lport, u16 xid,
+ struct scatterlist *sgl, unsigned int sgc)
{
- struct net_device *n = fcoe_netdev(lp);
+ struct net_device *netdev = fcoe_netdev(lport);
- if (n->netdev_ops && n->netdev_ops->ndo_fcoe_ddp_setup)
- return n->netdev_ops->ndo_fcoe_ddp_setup(n, xid, sgl, sgc);
+ if (netdev->netdev_ops->ndo_fcoe_ddp_setup)
+ return netdev->netdev_ops->ndo_fcoe_ddp_setup(netdev,
+ xid, sgl,
+ sgc);
return 0;
}
-/*
- * fcoe_ddp_done - calls LLD's ddp_done through net_device
- * @lp: the corresponding fc_lport
- * @xid: the exchange id for this ddp transfer
- *
- * Returns : the length of data that have been completed by ddp
- */
-static int fcoe_ddp_done(struct fc_lport *lp, u16 xid)
-{
- struct net_device *n = fcoe_netdev(lp);
-
- if (n->netdev_ops && n->netdev_ops->ndo_fcoe_ddp_done)
- return n->netdev_ops->ndo_fcoe_ddp_done(n, xid);
- return 0;
-}
-
-static struct libfc_function_template fcoe_libfc_fcn_templ = {
- .frame_send = fcoe_xmit,
- .ddp_setup = fcoe_ddp_setup,
- .ddp_done = fcoe_ddp_done,
-};
-
/**
- * fcoe_if_create() - this function creates the fcoe port
- * @fcoe: fcoe_interface structure to create an fc_lport instance on
- * @parent: device pointer to be the parent in sysfs for the SCSI host
+ * fcoe_ddp_done() - Call a LLD's ddp_done through the net device
+ * @lport: The local port to complete DDP on
+ * @xid: The exchange ID for this DDP transfer
*
- * Creates fc_lport struct and scsi_host for lport, configures lport.
+ * Returns: the length of data that have been completed by DDP
+ */
+static int fcoe_ddp_done(struct fc_lport *lport, u16 xid)
+{
+ struct net_device *netdev = fcoe_netdev(lport);
+
+ if (netdev->netdev_ops->ndo_fcoe_ddp_done)
+ return netdev->netdev_ops->ndo_fcoe_ddp_done(netdev, xid);
+ return 0;
+}
+
+/**
+ * fcoe_if_create() - Create a FCoE instance on an interface
+ * @fcoe: The FCoE interface to create a local port on
+ * @parent: The device pointer to be the parent in sysfs for the SCSI host
+ * @npiv: Indicates if the port is a vport or not
*
- * Returns : The allocated fc_lport or an error pointer
+ * Creates a fc_lport instance and a Scsi_Host instance and configure them.
+ *
+ * Returns: The allocated fc_lport or an error pointer
*/
static struct fc_lport *fcoe_if_create(struct fcoe_interface *fcoe,
- struct device *parent)
+ struct device *parent, int npiv)
{
- int rc;
+ struct net_device *netdev = fcoe->netdev;
struct fc_lport *lport = NULL;
struct fcoe_port *port;
struct Scsi_Host *shost;
- struct net_device *netdev = fcoe->netdev;
+ int rc;
+ /*
+ * parent is only a vport if npiv is 1,
+ * but we'll only use vport in that case so go ahead and set it
+ */
+ struct fc_vport *vport = dev_to_vport(parent);
FCOE_NETDEV_DBG(netdev, "Create Interface\n");
- shost = libfc_host_alloc(&fcoe_shost_template,
- sizeof(struct fcoe_port));
- if (!shost) {
+ if (!npiv) {
+ lport = libfc_host_alloc(&fcoe_shost_template,
+ sizeof(struct fcoe_port));
+ } else {
+ lport = libfc_vport_create(vport,
+ sizeof(struct fcoe_port));
+ }
+ if (!lport) {
FCOE_NETDEV_DBG(netdev, "Could not allocate host structure\n");
rc = -ENOMEM;
goto out;
}
- lport = shost_priv(shost);
+ shost = lport->host;
port = lport_priv(lport);
port->lport = lport;
port->fcoe = fcoe;
INIT_WORK(&port->destroy_work, fcoe_destroy_work);
- /* configure fc_lport, e.g., em */
+ /* configure a fc_lport including the exchange manager */
rc = fcoe_lport_config(lport);
if (rc) {
FCOE_NETDEV_DBG(netdev, "Could not configure lport for the "
@@ -733,6 +903,13 @@
goto out_host_put;
}
+ if (npiv) {
+ FCOE_NETDEV_DBG(netdev, "Setting vport names, 0x%llX 0x%llX\n",
+ vport->node_name, vport->port_name);
+ fc_set_wwnn(lport, vport->node_name);
+ fc_set_wwpn(lport, vport->port_name);
+ }
+
/* configure lport network properties */
rc = fcoe_netdev_config(lport, netdev);
if (rc) {
@@ -757,21 +934,24 @@
goto out_lp_destroy;
}
- /*
- * fcoe_em_alloc() and fcoe_hostlist_add() both
- * need to be atomic with respect to other changes to the hostlist
- * since fcoe_em_alloc() looks for an existing EM
- * instance on host list updated by fcoe_hostlist_add().
- *
- * This is currently handled through the fcoe_config_mutex begin held.
- */
+ if (!npiv) {
+ /*
+ * fcoe_em_alloc() and fcoe_hostlist_add() both
+ * need to be atomic with respect to other changes to the
+ * hostlist since fcoe_em_alloc() looks for an existing EM
+ * instance on host list updated by fcoe_hostlist_add().
+ *
+ * This is currently handled through the fcoe_config_mutex
+ * begin held.
+ */
- /* lport exch manager allocation */
- rc = fcoe_em_config(lport);
- if (rc) {
- FCOE_NETDEV_DBG(netdev, "Could not configure the EM for the "
- "interface\n");
- goto out_lp_destroy;
+ /* lport exch manager allocation */
+ rc = fcoe_em_config(lport);
+ if (rc) {
+ FCOE_NETDEV_DBG(netdev, "Could not configure the EM "
+ "for the interface\n");
+ goto out_lp_destroy;
+ }
}
fcoe_interface_get(fcoe);
@@ -786,17 +966,20 @@
}
/**
- * fcoe_if_init() - attach to scsi transport
+ * fcoe_if_init() - Initialization routine for fcoe.ko
*
- * Returns : 0 on success
+ * Attaches the SW FCoE transport to the FC transport
+ *
+ * Returns: 0 on success
*/
static int __init fcoe_if_init(void)
{
/* attach to scsi transport */
- scsi_transport_fcoe_sw =
- fc_attach_transport(&fcoe_transport_function);
+ fcoe_transport_template = fc_attach_transport(&fcoe_transport_function);
+ fcoe_vport_transport_template =
+ fc_attach_transport(&fcoe_vport_transport_function);
- if (!scsi_transport_fcoe_sw) {
+ if (!fcoe_transport_template) {
printk(KERN_ERR "fcoe: Failed to attach to the FC transport\n");
return -ENODEV;
}
@@ -805,20 +988,24 @@
}
/**
- * fcoe_if_exit() - detach from scsi transport
+ * fcoe_if_exit() - Tear down fcoe.ko
*
- * Returns : 0 on success
+ * Detaches the SW FCoE transport from the FC transport
+ *
+ * Returns: 0 on success
*/
int __exit fcoe_if_exit(void)
{
- fc_release_transport(scsi_transport_fcoe_sw);
- scsi_transport_fcoe_sw = NULL;
+ fc_release_transport(fcoe_transport_template);
+ fc_release_transport(fcoe_vport_transport_template);
+ fcoe_transport_template = NULL;
+ fcoe_vport_transport_template = NULL;
return 0;
}
/**
- * fcoe_percpu_thread_create() - Create a receive thread for an online cpu
- * @cpu: cpu index for the online cpu
+ * fcoe_percpu_thread_create() - Create a receive thread for an online CPU
+ * @cpu: The CPU index of the CPU to create a receive thread for
*/
static void fcoe_percpu_thread_create(unsigned int cpu)
{
@@ -841,8 +1028,8 @@
}
/**
- * fcoe_percpu_thread_destroy() - removes the rx thread for the given cpu
- * @cpu: cpu index the rx thread is to be removed
+ * fcoe_percpu_thread_destroy() - Remove the receive thread of a CPU
+ * @cpu: The CPU index of the CPU whose receive thread is to be destroyed
*
* Destroys a per-CPU Rx thread. Any pending skbs are moved to the
* current CPU's Rx thread. If the thread being destroyed is bound to
@@ -890,7 +1077,7 @@
} else {
/*
* The targeted CPU is not initialized and cannot accept
- * new skbs. Unlock the targeted CPU and drop the skbs
+ * new skbs. Unlock the targeted CPU and drop the skbs
* on the CPU that is going offline.
*/
while ((skb = __skb_dequeue(&p->fcoe_rx_list)) != NULL)
@@ -931,12 +1118,12 @@
}
/**
- * fcoe_cpu_callback() - fcoe cpu hotplug event callback
- * @nfb: callback data block
- * @action: event triggering the callback
- * @hcpu: index for the cpu of this event
+ * fcoe_cpu_callback() - Handler for CPU hotplug events
+ * @nfb: The callback data block
+ * @action: The event triggering the callback
+ * @hcpu: The index of the CPU that the event is for
*
- * This creates or destroys per cpu data for fcoe
+ * This creates or destroys per-CPU data for fcoe
*
* Returns NOTIFY_OK always.
*/
@@ -962,25 +1149,22 @@
return NOTIFY_OK;
}
-static struct notifier_block fcoe_cpu_notifier = {
- .notifier_call = fcoe_cpu_callback,
-};
-
/**
- * fcoe_rcv() - this is the fcoe receive function called by NET_RX_SOFTIRQ
- * @skb: the receive skb
- * @dev: associated net device
- * @ptype: context
- * @olddev: last device
+ * fcoe_rcv() - Receive packets from a net device
+ * @skb: The received packet
+ * @netdev: The net device that the packet was received on
+ * @ptype: The packet type context
+ * @olddev: The last device net device
*
- * this function will receive the packet and build fc frame and pass it up
+ * This routine is called by NET_RX_SOFTIRQ. It receives a packet, builds a
+ * FC frame and passes the frame to libfc.
*
* Returns: 0 for success
*/
-int fcoe_rcv(struct sk_buff *skb, struct net_device *dev,
+int fcoe_rcv(struct sk_buff *skb, struct net_device *netdev,
struct packet_type *ptype, struct net_device *olddev)
{
- struct fc_lport *lp;
+ struct fc_lport *lport;
struct fcoe_rcv_info *fr;
struct fcoe_interface *fcoe;
struct fc_frame_header *fh;
@@ -988,15 +1172,15 @@
unsigned int cpu;
fcoe = container_of(ptype, struct fcoe_interface, fcoe_packet_type);
- lp = fcoe->ctlr.lp;
- if (unlikely(lp == NULL)) {
- FCOE_NETDEV_DBG(dev, "Cannot find hba structure");
+ lport = fcoe->ctlr.lp;
+ if (unlikely(!lport)) {
+ FCOE_NETDEV_DBG(netdev, "Cannot find hba structure");
goto err2;
}
- if (!lp->link_up)
+ if (!lport->link_up)
goto err2;
- FCOE_NETDEV_DBG(dev, "skb_info: len:%d data_len:%d head:%p "
+ FCOE_NETDEV_DBG(netdev, "skb_info: len:%d data_len:%d head:%p "
"data:%p tail:%p end:%p sum:%d dev:%s",
skb->len, skb->data_len, skb->head, skb->data,
skb_tail_pointer(skb), skb_end_pointer(skb),
@@ -1004,7 +1188,7 @@
/* check for FCOE packet type */
if (unlikely(eth_hdr(skb)->h_proto != htons(ETH_P_FCOE))) {
- FCOE_NETDEV_DBG(dev, "Wrong FC type frame");
+ FCOE_NETDEV_DBG(netdev, "Wrong FC type frame");
goto err;
}
@@ -1013,14 +1197,14 @@
* and FC headers are pulled into the linear data area.
*/
if (unlikely((skb->len < FCOE_MIN_FRAME) ||
- !pskb_may_pull(skb, FCOE_HEADER_LEN)))
+ !pskb_may_pull(skb, FCOE_HEADER_LEN)))
goto err;
skb_set_transport_header(skb, sizeof(struct fcoe_hdr));
fh = (struct fc_frame_header *) skb_transport_header(skb);
fr = fcoe_dev_from_skb(skb);
- fr->fr_dev = lp;
+ fr->fr_dev = lport;
fr->ptype = ptype;
/*
@@ -1042,7 +1226,7 @@
* the first CPU now. For non-SMP systems this
* will check the same CPU twice.
*/
- FCOE_NETDEV_DBG(dev, "CPU is online, but no receive thread "
+ FCOE_NETDEV_DBG(netdev, "CPU is online, but no receive thread "
"ready for incoming skb- using first online "
"CPU.\n");
@@ -1061,15 +1245,29 @@
* this skb. We also have this receive thread locked,
* so we're free to queue skbs into it's queue.
*/
- __skb_queue_tail(&fps->fcoe_rx_list, skb);
- if (fps->fcoe_rx_list.qlen == 1)
- wake_up_process(fps->thread);
- spin_unlock_bh(&fps->fcoe_rx_list.lock);
+ /* If this is a SCSI-FCP frame, and this is already executing on the
+ * correct CPU, and the queue for this CPU is empty, then go ahead
+ * and process the frame directly in the softirq context.
+ * This lets us process completions without context switching from the
+ * NET_RX softirq, to our receive processing thread, and then back to
+ * BLOCK softirq context.
+ */
+ if (fh->fh_type == FC_TYPE_FCP &&
+ cpu == smp_processor_id() &&
+ skb_queue_empty(&fps->fcoe_rx_list)) {
+ spin_unlock_bh(&fps->fcoe_rx_list.lock);
+ fcoe_recv_frame(skb);
+ } else {
+ __skb_queue_tail(&fps->fcoe_rx_list, skb);
+ if (fps->fcoe_rx_list.qlen == 1)
+ wake_up_process(fps->thread);
+ spin_unlock_bh(&fps->fcoe_rx_list.lock);
+ }
return 0;
err:
- fc_lport_get_stats(lp)->ErrorFrames++;
+ fc_lport_get_stats(lport)->ErrorFrames++;
err2:
kfree_skb(skb);
@@ -1077,17 +1275,21 @@
}
/**
- * fcoe_start_io() - pass to netdev to start xmit for fcoe
- * @skb: the skb to be xmitted
+ * fcoe_start_io() - Start FCoE I/O
+ * @skb: The packet to be transmitted
+ *
+ * This routine is called from the net device to start transmitting
+ * FCoE packets.
*
* Returns: 0 for success
*/
static inline int fcoe_start_io(struct sk_buff *skb)
{
+ struct sk_buff *nskb;
int rc;
- skb_get(skb);
- rc = dev_queue_xmit(skb);
+ nskb = skb_clone(skb, GFP_ATOMIC);
+ rc = dev_queue_xmit(nskb);
if (rc != 0)
return rc;
kfree_skb(skb);
@@ -1095,9 +1297,15 @@
}
/**
- * fcoe_get_paged_crc_eof() - in case we need to alloc a page for crc_eof
- * @skb: the skb to be xmitted
- * @tlen: total len
+ * fcoe_get_paged_crc_eof() - Allocate a page to be used for the trailer CRC
+ * @skb: The packet to be transmitted
+ * @tlen: The total length of the trailer
+ *
+ * This routine allocates a page for frame trailers. The page is re-used if
+ * there is enough room left on it for the current trailer. If there isn't
+ * enough buffer left a new page is allocated for the trailer. Reference to
+ * the page from this function as well as the skbs using the page fragments
+ * ensure that the page is freed at the appropriate time.
*
* Returns: 0 for success
*/
@@ -1136,11 +1344,12 @@
}
/**
- * fcoe_fc_crc() - calculates FC CRC in this fcoe skb
- * @fp: the fc_frame containing data to be checksummed
+ * fcoe_fc_crc() - Calculates the CRC for a given frame
+ * @fp: The frame to be checksumed
*
- * This uses crc32() to calculate the crc for port frame
- * Return : 32 bit crc
+ * This uses crc32() routine to calculate the CRC for a frame
+ *
+ * Return: The 32 bit CRC value
*/
u32 fcoe_fc_crc(struct fc_frame *fp)
{
@@ -1171,13 +1380,13 @@
}
/**
- * fcoe_xmit() - FCoE frame transmit function
- * @lp: the associated local fcoe
- * @fp: the fc_frame to be transmitted
+ * fcoe_xmit() - Transmit a FCoE frame
+ * @lport: The local port that the frame is to be transmitted for
+ * @fp: The frame to be transmitted
*
- * Return : 0 for success
+ * Return: 0 for success
*/
-int fcoe_xmit(struct fc_lport *lp, struct fc_frame *fp)
+int fcoe_xmit(struct fc_lport *lport, struct fc_frame *fp)
{
int wlen;
u32 crc;
@@ -1189,7 +1398,7 @@
unsigned int hlen; /* header length implies the version */
unsigned int tlen; /* trailer length */
unsigned int elen; /* eth header, may include vlan */
- struct fcoe_port *port = lport_priv(lp);
+ struct fcoe_port *port = lport_priv(lport);
struct fcoe_interface *fcoe = port->fcoe;
u8 sof, eof;
struct fcoe_hdr *hp;
@@ -1200,13 +1409,13 @@
skb = fp_skb(fp);
wlen = skb->len / FCOE_WORD_TO_BYTE;
- if (!lp->link_up) {
+ if (!lport->link_up) {
kfree_skb(skb);
return 0;
}
if (unlikely(fh->fh_r_ctl == FC_RCTL_ELS_REQ) &&
- fcoe_ctlr_els_send(&fcoe->ctlr, skb))
+ fcoe_ctlr_els_send(&fcoe->ctlr, lport, skb))
return 0;
sof = fr_sof(fp);
@@ -1218,7 +1427,7 @@
wlen = (skb->len - tlen + sizeof(crc)) / FCOE_WORD_TO_BYTE;
/* crc offload */
- if (likely(lp->crc_offload)) {
+ if (likely(lport->crc_offload)) {
skb->ip_summed = CHECKSUM_PARTIAL;
skb->csum_start = skb_headroom(skb);
skb->csum_offset = skb->len;
@@ -1271,7 +1480,7 @@
if (unlikely(fcoe->ctlr.flogi_oxid != FC_XID_UNKNOWN))
memcpy(eh->h_source, fcoe->ctlr.ctl_src_addr, ETH_ALEN);
else
- memcpy(eh->h_source, fcoe->ctlr.data_src_addr, ETH_ALEN);
+ memcpy(eh->h_source, port->data_src_addr, ETH_ALEN);
hp = (struct fcoe_hdr *)(eh + 1);
memset(hp, 0, sizeof(*hp));
@@ -1280,7 +1489,7 @@
hp->fcoe_sof = sof;
/* fcoe lso, mss is in max_payload which is non-zero for FCP data */
- if (lp->seq_offload && fr_max_payload(fp)) {
+ if (lport->seq_offload && fr_max_payload(fp)) {
skb_shinfo(skb)->gso_type = SKB_GSO_FCOE;
skb_shinfo(skb)->gso_size = fr_max_payload(fp);
} else {
@@ -1288,23 +1497,23 @@
skb_shinfo(skb)->gso_size = 0;
}
/* update tx stats: regardless if LLD fails */
- stats = fc_lport_get_stats(lp);
+ stats = fc_lport_get_stats(lport);
stats->TxFrames++;
stats->TxWords += wlen;
/* send down to lld */
- fr_dev(fp) = lp;
+ fr_dev(fp) = lport;
if (port->fcoe_pending_queue.qlen)
- fcoe_check_wait_queue(lp, skb);
+ fcoe_check_wait_queue(lport, skb);
else if (fcoe_start_io(skb))
- fcoe_check_wait_queue(lp, skb);
+ fcoe_check_wait_queue(lport, skb);
return 0;
}
/**
- * fcoe_percpu_flush_done() - Indicate percpu queue flush completion.
- * @skb: the skb being completed.
+ * fcoe_percpu_flush_done() - Indicate per-CPU queue flush completion
+ * @skb: The completed skb (argument required by destructor)
*/
static void fcoe_percpu_flush_done(struct sk_buff *skb)
{
@@ -1312,25 +1521,133 @@
}
/**
- * fcoe_percpu_receive_thread() - recv thread per cpu
- * @arg: ptr to the fcoe per cpu struct
+ * fcoe_recv_frame() - process a single received frame
+ * @skb: frame to process
+ */
+static void fcoe_recv_frame(struct sk_buff *skb)
+{
+ u32 fr_len;
+ struct fc_lport *lport;
+ struct fcoe_rcv_info *fr;
+ struct fcoe_dev_stats *stats;
+ struct fc_frame_header *fh;
+ struct fcoe_crc_eof crc_eof;
+ struct fc_frame *fp;
+ u8 *mac = NULL;
+ struct fcoe_port *port;
+ struct fcoe_hdr *hp;
+
+ fr = fcoe_dev_from_skb(skb);
+ lport = fr->fr_dev;
+ if (unlikely(!lport)) {
+ if (skb->destructor != fcoe_percpu_flush_done)
+ FCOE_NETDEV_DBG(skb->dev, "NULL lport in skb");
+ kfree_skb(skb);
+ return;
+ }
+
+ FCOE_NETDEV_DBG(skb->dev, "skb_info: len:%d data_len:%d "
+ "head:%p data:%p tail:%p end:%p sum:%d dev:%s",
+ skb->len, skb->data_len,
+ skb->head, skb->data, skb_tail_pointer(skb),
+ skb_end_pointer(skb), skb->csum,
+ skb->dev ? skb->dev->name : "<NULL>");
+
+ /*
+ * Save source MAC address before discarding header.
+ */
+ port = lport_priv(lport);
+ if (skb_is_nonlinear(skb))
+ skb_linearize(skb); /* not ideal */
+ mac = eth_hdr(skb)->h_source;
+
+ /*
+ * Frame length checks and setting up the header pointers
+ * was done in fcoe_rcv already.
+ */
+ hp = (struct fcoe_hdr *) skb_network_header(skb);
+ fh = (struct fc_frame_header *) skb_transport_header(skb);
+
+ stats = fc_lport_get_stats(lport);
+ if (unlikely(FC_FCOE_DECAPS_VER(hp) != FC_FCOE_VER)) {
+ if (stats->ErrorFrames < 5)
+ printk(KERN_WARNING "fcoe: FCoE version "
+ "mismatch: The frame has "
+ "version %x, but the "
+ "initiator supports version "
+ "%x\n", FC_FCOE_DECAPS_VER(hp),
+ FC_FCOE_VER);
+ stats->ErrorFrames++;
+ kfree_skb(skb);
+ return;
+ }
+
+ skb_pull(skb, sizeof(struct fcoe_hdr));
+ fr_len = skb->len - sizeof(struct fcoe_crc_eof);
+
+ stats->RxFrames++;
+ stats->RxWords += fr_len / FCOE_WORD_TO_BYTE;
+
+ fp = (struct fc_frame *)skb;
+ fc_frame_init(fp);
+ fr_dev(fp) = lport;
+ fr_sof(fp) = hp->fcoe_sof;
+
+ /* Copy out the CRC and EOF trailer for access */
+ if (skb_copy_bits(skb, fr_len, &crc_eof, sizeof(crc_eof))) {
+ kfree_skb(skb);
+ return;
+ }
+ fr_eof(fp) = crc_eof.fcoe_eof;
+ fr_crc(fp) = crc_eof.fcoe_crc32;
+ if (pskb_trim(skb, fr_len)) {
+ kfree_skb(skb);
+ return;
+ }
+
+ /*
+ * We only check CRC if no offload is available and if it is
+ * it's solicited data, in which case, the FCP layer would
+ * check it during the copy.
+ */
+ if (lport->crc_offload &&
+ skb->ip_summed == CHECKSUM_UNNECESSARY)
+ fr_flags(fp) &= ~FCPHF_CRC_UNCHECKED;
+ else
+ fr_flags(fp) |= FCPHF_CRC_UNCHECKED;
+
+ fh = fc_frame_header_get(fp);
+ if (fh->fh_r_ctl == FC_RCTL_DD_SOL_DATA &&
+ fh->fh_type == FC_TYPE_FCP) {
+ fc_exch_recv(lport, fp);
+ return;
+ }
+ if (fr_flags(fp) & FCPHF_CRC_UNCHECKED) {
+ if (le32_to_cpu(fr_crc(fp)) !=
+ ~crc32(~0, skb->data, fr_len)) {
+ if (stats->InvalidCRCCount < 5)
+ printk(KERN_WARNING "fcoe: dropping "
+ "frame with CRC error\n");
+ stats->InvalidCRCCount++;
+ stats->ErrorFrames++;
+ fc_frame_free(fp);
+ return;
+ }
+ fr_flags(fp) &= ~FCPHF_CRC_UNCHECKED;
+ }
+ fc_exch_recv(lport, fp);
+}
+
+/**
+ * fcoe_percpu_receive_thread() - The per-CPU packet receive thread
+ * @arg: The per-CPU context
*
* Return: 0 for success
*/
int fcoe_percpu_receive_thread(void *arg)
{
struct fcoe_percpu_s *p = arg;
- u32 fr_len;
- struct fc_lport *lp;
- struct fcoe_rcv_info *fr;
- struct fcoe_dev_stats *stats;
- struct fc_frame_header *fh;
struct sk_buff *skb;
- struct fcoe_crc_eof crc_eof;
- struct fc_frame *fp;
- u8 *mac = NULL;
- struct fcoe_port *port;
- struct fcoe_hdr *hp;
set_user_nice(current, -20);
@@ -1347,129 +1664,27 @@
spin_lock_bh(&p->fcoe_rx_list.lock);
}
spin_unlock_bh(&p->fcoe_rx_list.lock);
- fr = fcoe_dev_from_skb(skb);
- lp = fr->fr_dev;
- if (unlikely(lp == NULL)) {
- if (skb->destructor != fcoe_percpu_flush_done)
- FCOE_NETDEV_DBG(skb->dev, "NULL lport in skb");
- kfree_skb(skb);
- continue;
- }
-
- FCOE_NETDEV_DBG(skb->dev, "skb_info: len:%d data_len:%d "
- "head:%p data:%p tail:%p end:%p sum:%d dev:%s",
- skb->len, skb->data_len,
- skb->head, skb->data, skb_tail_pointer(skb),
- skb_end_pointer(skb), skb->csum,
- skb->dev ? skb->dev->name : "<NULL>");
-
- /*
- * Save source MAC address before discarding header.
- */
- port = lport_priv(lp);
- if (skb_is_nonlinear(skb))
- skb_linearize(skb); /* not ideal */
- mac = eth_hdr(skb)->h_source;
-
- /*
- * Frame length checks and setting up the header pointers
- * was done in fcoe_rcv already.
- */
- hp = (struct fcoe_hdr *) skb_network_header(skb);
- fh = (struct fc_frame_header *) skb_transport_header(skb);
-
- stats = fc_lport_get_stats(lp);
- if (unlikely(FC_FCOE_DECAPS_VER(hp) != FC_FCOE_VER)) {
- if (stats->ErrorFrames < 5)
- printk(KERN_WARNING "fcoe: FCoE version "
- "mismatch: The frame has "
- "version %x, but the "
- "initiator supports version "
- "%x\n", FC_FCOE_DECAPS_VER(hp),
- FC_FCOE_VER);
- stats->ErrorFrames++;
- kfree_skb(skb);
- continue;
- }
-
- skb_pull(skb, sizeof(struct fcoe_hdr));
- fr_len = skb->len - sizeof(struct fcoe_crc_eof);
-
- stats->RxFrames++;
- stats->RxWords += fr_len / FCOE_WORD_TO_BYTE;
-
- fp = (struct fc_frame *)skb;
- fc_frame_init(fp);
- fr_dev(fp) = lp;
- fr_sof(fp) = hp->fcoe_sof;
-
- /* Copy out the CRC and EOF trailer for access */
- if (skb_copy_bits(skb, fr_len, &crc_eof, sizeof(crc_eof))) {
- kfree_skb(skb);
- continue;
- }
- fr_eof(fp) = crc_eof.fcoe_eof;
- fr_crc(fp) = crc_eof.fcoe_crc32;
- if (pskb_trim(skb, fr_len)) {
- kfree_skb(skb);
- continue;
- }
-
- /*
- * We only check CRC if no offload is available and if it is
- * it's solicited data, in which case, the FCP layer would
- * check it during the copy.
- */
- if (lp->crc_offload && skb->ip_summed == CHECKSUM_UNNECESSARY)
- fr_flags(fp) &= ~FCPHF_CRC_UNCHECKED;
- else
- fr_flags(fp) |= FCPHF_CRC_UNCHECKED;
-
- fh = fc_frame_header_get(fp);
- if (fh->fh_r_ctl == FC_RCTL_DD_SOL_DATA &&
- fh->fh_type == FC_TYPE_FCP) {
- fc_exch_recv(lp, fp);
- continue;
- }
- if (fr_flags(fp) & FCPHF_CRC_UNCHECKED) {
- if (le32_to_cpu(fr_crc(fp)) !=
- ~crc32(~0, skb->data, fr_len)) {
- if (stats->InvalidCRCCount < 5)
- printk(KERN_WARNING "fcoe: dropping "
- "frame with CRC error\n");
- stats->InvalidCRCCount++;
- stats->ErrorFrames++;
- fc_frame_free(fp);
- continue;
- }
- fr_flags(fp) &= ~FCPHF_CRC_UNCHECKED;
- }
- if (unlikely(port->fcoe->ctlr.flogi_oxid != FC_XID_UNKNOWN) &&
- fcoe_ctlr_recv_flogi(&port->fcoe->ctlr, fp, mac)) {
- fc_frame_free(fp);
- continue;
- }
- fc_exch_recv(lp, fp);
+ fcoe_recv_frame(skb);
}
return 0;
}
/**
- * fcoe_check_wait_queue() - attempt to clear the transmit backlog
- * @lp: the fc_lport
+ * fcoe_check_wait_queue() - Attempt to clear the transmit backlog
+ * @lport: The local port whose backlog is to be cleared
*
- * This empties the wait_queue, dequeue the head of the wait_queue queue
- * and calls fcoe_start_io() for each packet, if all skb have been
- * transmitted, return qlen or -1 if a error occurs, then restore
- * wait_queue and try again later.
+ * This empties the wait_queue, dequeues the head of the wait_queue queue
+ * and calls fcoe_start_io() for each packet. If all skb have been
+ * transmitted it returns the qlen. If an error occurs it restores
+ * wait_queue (to try again later) and returns -1.
*
- * The wait_queue is used when the skb transmit fails. skb will go
- * in the wait_queue which will be emptied by the timer function or
+ * The wait_queue is used when the skb transmit fails. The failed skb
+ * will go in the wait_queue which will be emptied by the timer function or
* by the next skb transmit.
*/
-static void fcoe_check_wait_queue(struct fc_lport *lp, struct sk_buff *skb)
+static void fcoe_check_wait_queue(struct fc_lport *lport, struct sk_buff *skb)
{
- struct fcoe_port *port = lport_priv(lp);
+ struct fcoe_port *port = lport_priv(lport);
int rc;
spin_lock_bh(&port->fcoe_pending_queue.lock);
@@ -1501,19 +1716,19 @@
}
if (port->fcoe_pending_queue.qlen < FCOE_LOW_QUEUE_DEPTH)
- lp->qfull = 0;
+ lport->qfull = 0;
if (port->fcoe_pending_queue.qlen && !timer_pending(&port->timer))
mod_timer(&port->timer, jiffies + 2);
port->fcoe_pending_queue_active = 0;
out:
if (port->fcoe_pending_queue.qlen > FCOE_MAX_QUEUE_DEPTH)
- lp->qfull = 1;
+ lport->qfull = 1;
spin_unlock_bh(&port->fcoe_pending_queue.lock);
return;
}
/**
- * fcoe_dev_setup() - setup link change notification interface
+ * fcoe_dev_setup() - Setup the link change notification interface
*/
static void fcoe_dev_setup(void)
{
@@ -1521,7 +1736,7 @@
}
/**
- * fcoe_dev_cleanup() - cleanup link change notification interface
+ * fcoe_dev_cleanup() - Cleanup the link change notification interface
*/
static void fcoe_dev_cleanup(void)
{
@@ -1529,19 +1744,19 @@
}
/**
- * fcoe_device_notification() - netdev event notification callback
- * @notifier: context of the notification
- * @event: type of event
- * @ptr: fixed array for output parsed ifname
+ * fcoe_device_notification() - Handler for net device events
+ * @notifier: The context of the notification
+ * @event: The type of event
+ * @ptr: The net device that the event was on
*
- * This function is called by the ethernet driver in case of link change event
+ * This function is called by the Ethernet driver in case of link change event.
*
* Returns: 0 for success
*/
static int fcoe_device_notification(struct notifier_block *notifier,
ulong event, void *ptr)
{
- struct fc_lport *lp = NULL;
+ struct fc_lport *lport = NULL;
struct net_device *netdev = ptr;
struct fcoe_interface *fcoe;
struct fcoe_port *port;
@@ -1552,11 +1767,11 @@
list_for_each_entry(fcoe, &fcoe_hostlist, list) {
if (fcoe->netdev == netdev) {
- lp = fcoe->ctlr.lp;
+ lport = fcoe->ctlr.lp;
break;
}
}
- if (lp == NULL) {
+ if (!lport) {
rc = NOTIFY_DONE;
goto out;
}
@@ -1570,10 +1785,12 @@
case NETDEV_CHANGE:
break;
case NETDEV_CHANGEMTU:
+ if (netdev->features & NETIF_F_FCOE_MTU)
+ break;
mfs = netdev->mtu - (sizeof(struct fcoe_hdr) +
sizeof(struct fcoe_crc_eof));
if (mfs >= FC_MIN_MAX_FRAME)
- fc_set_mfs(lp, mfs);
+ fc_set_mfs(lport, mfs);
break;
case NETDEV_REGISTER:
break;
@@ -1588,22 +1805,22 @@
FCOE_NETDEV_DBG(netdev, "Unknown event %ld "
"from netdev netlink\n", event);
}
- if (link_possible && !fcoe_link_ok(lp))
+ if (link_possible && !fcoe_link_ok(lport))
fcoe_ctlr_link_up(&fcoe->ctlr);
else if (fcoe_ctlr_link_down(&fcoe->ctlr)) {
- stats = fc_lport_get_stats(lp);
+ stats = fc_lport_get_stats(lport);
stats->LinkFailureCount++;
- fcoe_clean_pending_queue(lp);
+ fcoe_clean_pending_queue(lport);
}
out:
return rc;
}
/**
- * fcoe_if_to_netdev() - parse a name buffer to get netdev
- * @buffer: incoming buffer to be copied
+ * fcoe_if_to_netdev() - Parse a name buffer to get a net device
+ * @buffer: The name of the net device
*
- * Returns: NULL or ptr to net_device
+ * Returns: NULL or a ptr to net_device
*/
static struct net_device *fcoe_if_to_netdev(const char *buffer)
{
@@ -1621,9 +1838,11 @@
}
/**
- * fcoe_destroy() - handles the destroy from sysfs
- * @buffer: expected to be an eth if name
- * @kp: associated kernel param
+ * fcoe_destroy() - Destroy a FCoE interface
+ * @buffer: The name of the Ethernet interface to be destroyed
+ * @kp: The associated kernel parameter
+ *
+ * Called from sysfs.
*
* Returns: 0 for success
*/
@@ -1631,7 +1850,7 @@
{
struct fcoe_interface *fcoe;
struct net_device *netdev;
- int rc;
+ int rc = 0;
mutex_lock(&fcoe_config_mutex);
#ifdef CONFIG_FCOE_MODULE
@@ -1670,6 +1889,10 @@
return rc;
}
+/**
+ * fcoe_destroy_work() - Destroy a FCoE port in a deferred work context
+ * @work: Handle to the FCoE port to be destroyed
+ */
static void fcoe_destroy_work(struct work_struct *work)
{
struct fcoe_port *port;
@@ -1681,9 +1904,11 @@
}
/**
- * fcoe_create() - Handles the create call from sysfs
- * @buffer: expected to be an eth if name
- * @kp: associated kernel param
+ * fcoe_create() - Create a fcoe interface
+ * @buffer: The name of the Ethernet interface to create on
+ * @kp: The associated kernel param
+ *
+ * Called from sysfs.
*
* Returns: 0 for success
*/
@@ -1726,7 +1951,7 @@
goto out_putdev;
}
- lport = fcoe_if_create(fcoe, &netdev->dev);
+ lport = fcoe_if_create(fcoe, &netdev->dev, 0);
if (IS_ERR(lport)) {
printk(KERN_ERR "fcoe: Failed to create interface (%s)\n",
netdev->name);
@@ -1762,16 +1987,9 @@
return rc;
}
-module_param_call(create, fcoe_create, NULL, NULL, S_IWUSR);
-__MODULE_PARM_TYPE(create, "string");
-MODULE_PARM_DESC(create, "Create fcoe fcoe using net device passed in.");
-module_param_call(destroy, fcoe_destroy, NULL, NULL, S_IWUSR);
-__MODULE_PARM_TYPE(destroy, "string");
-MODULE_PARM_DESC(destroy, "Destroy fcoe fcoe");
-
/**
- * fcoe_link_ok() - Check if link is ok for the fc_lport
- * @lp: ptr to the fc_lport
+ * fcoe_link_ok() - Check if the link is OK for a local port
+ * @lport: The local port to check link on
*
* Any permanently-disqualifying conditions have been previously checked.
* This also updates the speed setting, which may change with link for 100/1000.
@@ -1783,26 +2001,26 @@
* Returns: 0 if link is OK for use by FCoE.
*
*/
-int fcoe_link_ok(struct fc_lport *lp)
+int fcoe_link_ok(struct fc_lport *lport)
{
- struct fcoe_port *port = lport_priv(lp);
- struct net_device *dev = port->fcoe->netdev;
+ struct fcoe_port *port = lport_priv(lport);
+ struct net_device *netdev = port->fcoe->netdev;
struct ethtool_cmd ecmd = { ETHTOOL_GSET };
- if ((dev->flags & IFF_UP) && netif_carrier_ok(dev) &&
- (!dev_ethtool_get_settings(dev, &ecmd))) {
- lp->link_supported_speeds &=
+ if ((netdev->flags & IFF_UP) && netif_carrier_ok(netdev) &&
+ (!dev_ethtool_get_settings(netdev, &ecmd))) {
+ lport->link_supported_speeds &=
~(FC_PORTSPEED_1GBIT | FC_PORTSPEED_10GBIT);
if (ecmd.supported & (SUPPORTED_1000baseT_Half |
SUPPORTED_1000baseT_Full))
- lp->link_supported_speeds |= FC_PORTSPEED_1GBIT;
+ lport->link_supported_speeds |= FC_PORTSPEED_1GBIT;
if (ecmd.supported & SUPPORTED_10000baseT_Full)
- lp->link_supported_speeds |=
+ lport->link_supported_speeds |=
FC_PORTSPEED_10GBIT;
if (ecmd.speed == SPEED_1000)
- lp->link_speed = FC_PORTSPEED_1GBIT;
+ lport->link_speed = FC_PORTSPEED_1GBIT;
if (ecmd.speed == SPEED_10000)
- lp->link_speed = FC_PORTSPEED_10GBIT;
+ lport->link_speed = FC_PORTSPEED_10GBIT;
return 0;
}
@@ -1810,8 +2028,8 @@
}
/**
- * fcoe_percpu_clean() - Clear the pending skbs for an lport
- * @lp: the fc_lport
+ * fcoe_percpu_clean() - Clear all pending skbs for an local port
+ * @lport: The local port whose skbs are to be cleared
*
* Must be called with fcoe_create_mutex held to single-thread completion.
*
@@ -1820,7 +2038,7 @@
* there no packets that will be handled by the lport, but also that any
* threads already handling packet have returned.
*/
-void fcoe_percpu_clean(struct fc_lport *lp)
+void fcoe_percpu_clean(struct fc_lport *lport)
{
struct fcoe_percpu_s *pp;
struct fcoe_rcv_info *fr;
@@ -1838,7 +2056,7 @@
skb = next) {
next = skb->next;
fr = fcoe_dev_from_skb(skb);
- if (fr->fr_dev == lp) {
+ if (fr->fr_dev == lport) {
__skb_unlink(skb, list);
kfree_skb(skb);
}
@@ -1867,13 +2085,11 @@
/**
* fcoe_clean_pending_queue() - Dequeue a skb and free it
- * @lp: the corresponding fc_lport
- *
- * Returns: none
+ * @lport: The local port to dequeue a skb on
*/
-void fcoe_clean_pending_queue(struct fc_lport *lp)
+void fcoe_clean_pending_queue(struct fc_lport *lport)
{
- struct fcoe_port *port = lport_priv(lp);
+ struct fcoe_port *port = lport_priv(lport);
struct sk_buff *skb;
spin_lock_bh(&port->fcoe_pending_queue.lock);
@@ -1886,10 +2102,10 @@
}
/**
- * fcoe_reset() - Resets the fcoe
- * @shost: shost the reset is from
+ * fcoe_reset() - Reset a local port
+ * @shost: The SCSI host associated with the local port to be reset
*
- * Returns: always 0
+ * Returns: Always 0 (return value required by FC transport template)
*/
int fcoe_reset(struct Scsi_Host *shost)
{
@@ -1899,30 +2115,33 @@
}
/**
- * fcoe_hostlist_lookup_port() - find the corresponding lport by a given device
- * @dev: this is currently ptr to net_device
+ * fcoe_hostlist_lookup_port() - Find the FCoE interface associated with a net device
+ * @netdev: The net device used as a key
*
- * Returns: NULL or the located fcoe_port
- * Locking: must be called with the RNL mutex held
+ * Locking: Must be called with the RNL mutex held.
+ *
+ * Returns: NULL or the FCoE interface
*/
static struct fcoe_interface *
-fcoe_hostlist_lookup_port(const struct net_device *dev)
+fcoe_hostlist_lookup_port(const struct net_device *netdev)
{
struct fcoe_interface *fcoe;
list_for_each_entry(fcoe, &fcoe_hostlist, list) {
- if (fcoe->netdev == dev)
+ if (fcoe->netdev == netdev)
return fcoe;
}
return NULL;
}
/**
- * fcoe_hostlist_lookup() - Find the corresponding lport by netdev
- * @netdev: ptr to net_device
+ * fcoe_hostlist_lookup() - Find the local port associated with a
+ * given net device
+ * @netdev: The netdevice used as a key
*
- * Returns: 0 for success
- * Locking: must be called with the RTNL mutex held
+ * Locking: Must be called with the RTNL mutex held
+ *
+ * Returns: NULL or the local port
*/
static struct fc_lport *fcoe_hostlist_lookup(const struct net_device *netdev)
{
@@ -1933,11 +2152,13 @@
}
/**
- * fcoe_hostlist_add() - Add a lport to lports list
- * @lp: ptr to the fc_lport to be added
+ * fcoe_hostlist_add() - Add the FCoE interface identified by a local
+ * port to the hostlist
+ * @lport: The local port that identifies the FCoE interface to be added
+ *
+ * Locking: must be called with the RTNL mutex held
*
* Returns: 0 for success
- * Locking: must be called with the RTNL mutex held
*/
static int fcoe_hostlist_add(const struct fc_lport *lport)
{
@@ -1954,15 +2175,15 @@
}
/**
- * fcoe_init() - fcoe module loading initialization
+ * fcoe_init() - Initialize fcoe.ko
*
- * Returns 0 on success, negative on failure
+ * Returns: 0 on success, or a negative value on failure
*/
static int __init fcoe_init(void)
{
+ struct fcoe_percpu_s *p;
unsigned int cpu;
int rc = 0;
- struct fcoe_percpu_s *p;
mutex_lock(&fcoe_config_mutex);
@@ -1999,15 +2220,15 @@
module_init(fcoe_init);
/**
- * fcoe_exit() - fcoe module unloading cleanup
+ * fcoe_exit() - Clean up fcoe.ko
*
- * Returns 0 on success, negative on failure
+ * Returns: 0 on success or a negative value on failure
*/
static void __exit fcoe_exit(void)
{
- unsigned int cpu;
struct fcoe_interface *fcoe, *tmp;
struct fcoe_port *port;
+ unsigned int cpu;
mutex_lock(&fcoe_config_mutex);
@@ -2033,9 +2254,238 @@
/* flush any asyncronous interface destroys,
* this should happen after the netdev notifier is unregistered */
flush_scheduled_work();
+ /* That will flush out all the N_Ports on the hostlist, but now we
+ * may have NPIV VN_Ports scheduled for destruction */
+ flush_scheduled_work();
/* detach from scsi transport
* must happen after all destroys are done, therefor after the flush */
fcoe_if_exit();
}
module_exit(fcoe_exit);
+
+/**
+ * fcoe_flogi_resp() - FCoE specific FLOGI and FDISC response handler
+ * @seq: active sequence in the FLOGI or FDISC exchange
+ * @fp: response frame, or error encoded in a pointer (timeout)
+ * @arg: pointer the the fcoe_ctlr structure
+ *
+ * This handles MAC address managment for FCoE, then passes control on to
+ * the libfc FLOGI response handler.
+ */
+static void fcoe_flogi_resp(struct fc_seq *seq, struct fc_frame *fp, void *arg)
+{
+ struct fcoe_ctlr *fip = arg;
+ struct fc_exch *exch = fc_seq_exch(seq);
+ struct fc_lport *lport = exch->lp;
+ u8 *mac;
+
+ if (IS_ERR(fp))
+ goto done;
+
+ mac = fr_cb(fp)->granted_mac;
+ if (is_zero_ether_addr(mac)) {
+ /* pre-FIP */
+ if (fcoe_ctlr_recv_flogi(fip, lport, fp)) {
+ fc_frame_free(fp);
+ return;
+ }
+ }
+ fcoe_update_src_mac(lport, mac);
+done:
+ fc_lport_flogi_resp(seq, fp, lport);
+}
+
+/**
+ * fcoe_logo_resp() - FCoE specific LOGO response handler
+ * @seq: active sequence in the LOGO exchange
+ * @fp: response frame, or error encoded in a pointer (timeout)
+ * @arg: pointer the the fcoe_ctlr structure
+ *
+ * This handles MAC address managment for FCoE, then passes control on to
+ * the libfc LOGO response handler.
+ */
+static void fcoe_logo_resp(struct fc_seq *seq, struct fc_frame *fp, void *arg)
+{
+ struct fc_lport *lport = arg;
+ static u8 zero_mac[ETH_ALEN] = { 0 };
+
+ if (!IS_ERR(fp))
+ fcoe_update_src_mac(lport, zero_mac);
+ fc_lport_logo_resp(seq, fp, lport);
+}
+
+/**
+ * fcoe_elsct_send - FCoE specific ELS handler
+ *
+ * This does special case handling of FIP encapsualted ELS exchanges for FCoE,
+ * using FCoE specific response handlers and passing the FIP controller as
+ * the argument (the lport is still available from the exchange).
+ *
+ * Most of the work here is just handed off to the libfc routine.
+ */
+static struct fc_seq *fcoe_elsct_send(struct fc_lport *lport, u32 did,
+ struct fc_frame *fp, unsigned int op,
+ void (*resp)(struct fc_seq *,
+ struct fc_frame *,
+ void *),
+ void *arg, u32 timeout)
+{
+ struct fcoe_port *port = lport_priv(lport);
+ struct fcoe_interface *fcoe = port->fcoe;
+ struct fcoe_ctlr *fip = &fcoe->ctlr;
+ struct fc_frame_header *fh = fc_frame_header_get(fp);
+
+ switch (op) {
+ case ELS_FLOGI:
+ case ELS_FDISC:
+ return fc_elsct_send(lport, did, fp, op, fcoe_flogi_resp,
+ fip, timeout);
+ case ELS_LOGO:
+ /* only hook onto fabric logouts, not port logouts */
+ if (ntoh24(fh->fh_d_id) != FC_FID_FLOGI)
+ break;
+ return fc_elsct_send(lport, did, fp, op, fcoe_logo_resp,
+ lport, timeout);
+ }
+ return fc_elsct_send(lport, did, fp, op, resp, arg, timeout);
+}
+
+/**
+ * fcoe_vport_create() - create an fc_host/scsi_host for a vport
+ * @vport: fc_vport object to create a new fc_host for
+ * @disabled: start the new fc_host in a disabled state by default?
+ *
+ * Returns: 0 for success
+ */
+static int fcoe_vport_create(struct fc_vport *vport, bool disabled)
+{
+ struct Scsi_Host *shost = vport_to_shost(vport);
+ struct fc_lport *n_port = shost_priv(shost);
+ struct fcoe_port *port = lport_priv(n_port);
+ struct fcoe_interface *fcoe = port->fcoe;
+ struct net_device *netdev = fcoe->netdev;
+ struct fc_lport *vn_port;
+
+ mutex_lock(&fcoe_config_mutex);
+ vn_port = fcoe_if_create(fcoe, &vport->dev, 1);
+ mutex_unlock(&fcoe_config_mutex);
+
+ if (IS_ERR(vn_port)) {
+ printk(KERN_ERR "fcoe: fcoe_vport_create(%s) failed\n",
+ netdev->name);
+ return -EIO;
+ }
+
+ if (disabled) {
+ fc_vport_set_state(vport, FC_VPORT_DISABLED);
+ } else {
+ vn_port->boot_time = jiffies;
+ fc_fabric_login(vn_port);
+ fc_vport_setlink(vn_port);
+ }
+ return 0;
+}
+
+/**
+ * fcoe_vport_destroy() - destroy the fc_host/scsi_host for a vport
+ * @vport: fc_vport object that is being destroyed
+ *
+ * Returns: 0 for success
+ */
+static int fcoe_vport_destroy(struct fc_vport *vport)
+{
+ struct Scsi_Host *shost = vport_to_shost(vport);
+ struct fc_lport *n_port = shost_priv(shost);
+ struct fc_lport *vn_port = vport->dd_data;
+ struct fcoe_port *port = lport_priv(vn_port);
+
+ mutex_lock(&n_port->lp_mutex);
+ list_del(&vn_port->list);
+ mutex_unlock(&n_port->lp_mutex);
+ schedule_work(&port->destroy_work);
+ return 0;
+}
+
+/**
+ * fcoe_vport_disable() - change vport state
+ * @vport: vport to bring online/offline
+ * @disable: should the vport be disabled?
+ */
+static int fcoe_vport_disable(struct fc_vport *vport, bool disable)
+{
+ struct fc_lport *lport = vport->dd_data;
+
+ if (disable) {
+ fc_vport_set_state(vport, FC_VPORT_DISABLED);
+ fc_fabric_logoff(lport);
+ } else {
+ lport->boot_time = jiffies;
+ fc_fabric_login(lport);
+ fc_vport_setlink(lport);
+ }
+
+ return 0;
+}
+
+/**
+ * fcoe_vport_set_symbolic_name() - append vport string to symbolic name
+ * @vport: fc_vport with a new symbolic name string
+ *
+ * After generating a new symbolic name string, a new RSPN_ID request is
+ * sent to the name server. There is no response handler, so if it fails
+ * for some reason it will not be retried.
+ */
+static void fcoe_set_vport_symbolic_name(struct fc_vport *vport)
+{
+ struct fc_lport *lport = vport->dd_data;
+ struct fc_frame *fp;
+ size_t len;
+
+ snprintf(fc_host_symbolic_name(lport->host), FC_SYMBOLIC_NAME_SIZE,
+ "%s v%s over %s : %s", FCOE_NAME, FCOE_VERSION,
+ fcoe_netdev(lport)->name, vport->symbolic_name);
+
+ if (lport->state != LPORT_ST_READY)
+ return;
+
+ len = strnlen(fc_host_symbolic_name(lport->host), 255);
+ fp = fc_frame_alloc(lport,
+ sizeof(struct fc_ct_hdr) +
+ sizeof(struct fc_ns_rspn) + len);
+ if (!fp)
+ return;
+ lport->tt.elsct_send(lport, FC_FID_DIR_SERV, fp, FC_NS_RSPN_ID,
+ NULL, NULL, 3 * lport->r_a_tov);
+}
+
+/**
+ * fcoe_get_lesb() - Fill the FCoE Link Error Status Block
+ * @lport: the local port
+ * @fc_lesb: the link error status block
+ */
+static void fcoe_get_lesb(struct fc_lport *lport,
+ struct fc_els_lesb *fc_lesb)
+{
+ unsigned int cpu;
+ u32 lfc, vlfc, mdac;
+ struct fcoe_dev_stats *devst;
+ struct fcoe_fc_els_lesb *lesb;
+ struct net_device *netdev = fcoe_netdev(lport);
+
+ lfc = 0;
+ vlfc = 0;
+ mdac = 0;
+ lesb = (struct fcoe_fc_els_lesb *)fc_lesb;
+ memset(lesb, 0, sizeof(*lesb));
+ for_each_possible_cpu(cpu) {
+ devst = per_cpu_ptr(lport->dev_stats, cpu);
+ lfc += devst->LinkFailureCount;
+ vlfc += devst->VLinkFailureCount;
+ mdac += devst->MissDiscAdvCount;
+ }
+ lesb->lesb_link_fail = htonl(lfc);
+ lesb->lesb_vlink_fail = htonl(vlfc);
+ lesb->lesb_miss_fka = htonl(mdac);
+ lesb->lesb_fcs_error = htonl(dev_get_stats(netdev)->rx_crc_errors);
+}
diff --git a/drivers/scsi/fcoe/fcoe.h b/drivers/scsi/fcoe/fcoe.h
index ce7f60f..c69b2c5 100644
--- a/drivers/scsi/fcoe/fcoe.h
+++ b/drivers/scsi/fcoe/fcoe.h
@@ -32,7 +32,7 @@
#define FCOE_NAME "fcoe"
#define FCOE_VENDOR "Open-FCoE.org"
-#define FCOE_MAX_LUN 255
+#define FCOE_MAX_LUN 0xFFFF
#define FCOE_MAX_FCP_TARGET 256
#define FCOE_MAX_OUTSTANDING_COMMANDS 1024
@@ -40,11 +40,17 @@
#define FCOE_MIN_XID 0x0000 /* the min xid supported by fcoe_sw */
#define FCOE_MAX_XID 0x0FFF /* the max xid supported by fcoe_sw */
+/*
+ * Max MTU for FCoE: 14 (FCoE header) + 24 (FC header) + 2112 (max FC payload)
+ * + 4 (FC CRC) + 4 (FCoE trailer) = 2158 bytes
+ */
+#define FCOE_MTU 2158
+
unsigned int fcoe_debug_logging;
module_param_named(debug_logging, fcoe_debug_logging, int, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(debug_logging, "a bit mask of logging levels");
-#define FCOE_LOGGING 0x01 /* General logging, not categorized */
+#define FCOE_LOGGING 0x01 /* General logging, not categorized */
#define FCOE_NETDEV_LOGGING 0x02 /* Netdevice logging */
#define FCOE_CHECK_LOGGING(LEVEL, CMD) \
@@ -64,8 +70,13 @@
printk(KERN_INFO "fcoe: %s: " fmt, \
netdev->name, ##args);)
-/*
- * this percpu struct for fcoe
+/**
+ * struct fcoe_percpu_s - The per-CPU context for FCoE receive threads
+ * @thread: The thread context
+ * @fcoe_rx_list: The queue of pending packets to process
+ * @page: The memory page for calculating frame trailer CRCs
+ * @crc_eof_offset: The offset into the CRC page pointing to available
+ * memory for a new trailer
*/
struct fcoe_percpu_s {
struct task_struct *thread;
@@ -74,37 +85,62 @@
int crc_eof_offset;
};
-/*
- * an FCoE interface, 1:1 with netdev
+/**
+ * struct fcoe_interface - A FCoE interface
+ * @list: Handle for a list of FCoE interfaces
+ * @netdev: The associated net device
+ * @fcoe_packet_type: FCoE packet type
+ * @fip_packet_type: FIP packet type
+ * @ctlr: The FCoE controller (for FIP)
+ * @oem: The offload exchange manager for all local port
+ * instances associated with this port
+ * @kref: The kernel reference
+ *
+ * This structure is 1:1 with a net devive.
*/
struct fcoe_interface {
- struct list_head list;
- struct net_device *netdev;
- struct packet_type fcoe_packet_type;
- struct packet_type fip_packet_type;
- struct fcoe_ctlr ctlr;
- struct fc_exch_mgr *oem; /* offload exchange manager */
- struct kref kref;
+ struct list_head list;
+ struct net_device *netdev;
+ struct packet_type fcoe_packet_type;
+ struct packet_type fip_packet_type;
+ struct fcoe_ctlr ctlr;
+ struct fc_exch_mgr *oem;
+ struct kref kref;
};
-/*
- * the FCoE private structure that's allocated along with the
- * Scsi_Host and libfc fc_lport structures
+/**
+ * struct fcoe_port - The FCoE private structure
+ * @fcoe: The associated fcoe interface
+ * @lport: The associated local port
+ * @fcoe_pending_queue: The pending Rx queue of skbs
+ * @fcoe_pending_queue_active: Indicates if the pending queue is active
+ * @timer: The queue timer
+ * @destroy_work: Handle for work context
+ * (to prevent RTNL deadlocks)
+ * @data_srt_addr: Source address for data
+ *
+ * An instance of this structure is to be allocated along with the
+ * Scsi_Host and libfc fc_lport structures.
*/
struct fcoe_port {
struct fcoe_interface *fcoe;
- struct fc_lport *lport;
- struct sk_buff_head fcoe_pending_queue;
- u8 fcoe_pending_queue_active;
- struct timer_list timer; /* queue timer */
- struct work_struct destroy_work; /* to prevent rtnl deadlocks */
+ struct fc_lport *lport;
+ struct sk_buff_head fcoe_pending_queue;
+ u8 fcoe_pending_queue_active;
+ struct timer_list timer;
+ struct work_struct destroy_work;
+ u8 data_src_addr[ETH_ALEN];
};
#define fcoe_from_ctlr(fip) container_of(fip, struct fcoe_interface, ctlr)
-static inline struct net_device *fcoe_netdev(const struct fc_lport *lp)
+/**
+ * fcoe_netdev() - Return the net device associated with a local port
+ * @lport: The local port to get the net device from
+ */
+static inline struct net_device *fcoe_netdev(const struct fc_lport *lport)
{
- return ((struct fcoe_port *)lport_priv(lp))->fcoe->netdev;
+ return ((struct fcoe_port *)lport_priv(lport))->fcoe->netdev;
}
#endif /* _FCOE_H_ */
diff --git a/drivers/scsi/fcoe/libfcoe.c b/drivers/scsi/fcoe/libfcoe.c
index 11ae5c9..9823291 100644
--- a/drivers/scsi/fcoe/libfcoe.c
+++ b/drivers/scsi/fcoe/libfcoe.c
@@ -59,26 +59,30 @@
module_param_named(debug_logging, libfcoe_debug_logging, int, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(debug_logging, "a bit mask of logging levels");
-#define LIBFCOE_LOGGING 0x01 /* General logging, not categorized */
+#define LIBFCOE_LOGGING 0x01 /* General logging, not categorized */
#define LIBFCOE_FIP_LOGGING 0x02 /* FIP logging */
-#define LIBFCOE_CHECK_LOGGING(LEVEL, CMD) \
-do { \
- if (unlikely(libfcoe_debug_logging & LEVEL)) \
- do { \
- CMD; \
- } while (0); \
+#define LIBFCOE_CHECK_LOGGING(LEVEL, CMD) \
+do { \
+ if (unlikely(libfcoe_debug_logging & LEVEL)) \
+ do { \
+ CMD; \
+ } while (0); \
} while (0)
#define LIBFCOE_DBG(fmt, args...) \
LIBFCOE_CHECK_LOGGING(LIBFCOE_LOGGING, \
printk(KERN_INFO "libfcoe: " fmt, ##args);)
-#define LIBFCOE_FIP_DBG(fmt, args...) \
+#define LIBFCOE_FIP_DBG(fip, fmt, args...) \
LIBFCOE_CHECK_LOGGING(LIBFCOE_FIP_LOGGING, \
- printk(KERN_INFO "fip: " fmt, ##args);)
+ printk(KERN_INFO "host%d: fip: " fmt, \
+ (fip)->lp->host->host_no, ##args);)
-/*
+/**
+ * fcoe_ctlr_mtu_valid() - Check if a FCF's MTU is valid
+ * @fcf: The FCF to check
+ *
* Return non-zero if FCF fcoe_size has been validated.
*/
static inline int fcoe_ctlr_mtu_valid(const struct fcoe_fcf *fcf)
@@ -86,7 +90,10 @@
return (fcf->flags & FIP_FL_SOL) != 0;
}
-/*
+/**
+ * fcoe_ctlr_fcf_usable() - Check if a FCF is usable
+ * @fcf: The FCF to check
+ *
* Return non-zero if the FCF is usable.
*/
static inline int fcoe_ctlr_fcf_usable(struct fcoe_fcf *fcf)
@@ -97,12 +104,13 @@
}
/**
- * fcoe_ctlr_init() - Initialize the FCoE Controller instance.
- * @fip: FCoE controller.
+ * fcoe_ctlr_init() - Initialize the FCoE Controller instance
+ * @fip: The FCoE controller to initialize
*/
void fcoe_ctlr_init(struct fcoe_ctlr *fip)
{
fip->state = FIP_ST_LINK_WAIT;
+ fip->mode = FIP_ST_AUTO;
INIT_LIST_HEAD(&fip->fcfs);
spin_lock_init(&fip->lock);
fip->flogi_oxid = FC_XID_UNKNOWN;
@@ -114,8 +122,8 @@
EXPORT_SYMBOL(fcoe_ctlr_init);
/**
- * fcoe_ctlr_reset_fcfs() - Reset and free all FCFs for a controller.
- * @fip: FCoE controller.
+ * fcoe_ctlr_reset_fcfs() - Reset and free all FCFs for a controller
+ * @fip: The FCoE controller whose FCFs are to be reset
*
* Called with &fcoe_ctlr lock held.
*/
@@ -134,8 +142,8 @@
}
/**
- * fcoe_ctlr_destroy() - Disable and tear-down the FCoE controller.
- * @fip: FCoE controller.
+ * fcoe_ctlr_destroy() - Disable and tear down a FCoE controller
+ * @fip: The FCoE controller to tear down
*
* This is called by FCoE drivers before freeing the &fcoe_ctlr.
*
@@ -148,9 +156,7 @@
void fcoe_ctlr_destroy(struct fcoe_ctlr *fip)
{
cancel_work_sync(&fip->recv_work);
- spin_lock_bh(&fip->fip_recv_list.lock);
- __skb_queue_purge(&fip->fip_recv_list);
- spin_unlock_bh(&fip->fip_recv_list.lock);
+ skb_queue_purge(&fip->fip_recv_list);
spin_lock_bh(&fip->lock);
fip->state = FIP_ST_DISABLED;
@@ -162,8 +168,8 @@
EXPORT_SYMBOL(fcoe_ctlr_destroy);
/**
- * fcoe_ctlr_fcoe_size() - Return the maximum FCoE size required for VN_Port.
- * @fip: FCoE controller.
+ * fcoe_ctlr_fcoe_size() - Return the maximum FCoE size required for VN_Port
+ * @fip: The FCoE controller to get the maximum FCoE size from
*
* Returns the maximum packet size including the FCoE header and trailer,
* but not including any Ethernet or VLAN headers.
@@ -180,9 +186,9 @@
}
/**
- * fcoe_ctlr_solicit() - Send a solicitation.
- * @fip: FCoE controller.
- * @fcf: Destination FCF. If NULL, a multicast solicitation is sent.
+ * fcoe_ctlr_solicit() - Send a FIP solicitation
+ * @fip: The FCoE controller to send the solicitation on
+ * @fcf: The destination FCF (if NULL, a multicast solicitation is sent)
*/
static void fcoe_ctlr_solicit(struct fcoe_ctlr *fip, struct fcoe_fcf *fcf)
{
@@ -241,8 +247,8 @@
}
/**
- * fcoe_ctlr_link_up() - Start FCoE controller.
- * @fip: FCoE controller.
+ * fcoe_ctlr_link_up() - Start FCoE controller
+ * @fip: The FCoE controller to start
*
* Called from the LLD when the network link is ready.
*/
@@ -255,11 +261,12 @@
spin_unlock_bh(&fip->lock);
fc_linkup(fip->lp);
} else if (fip->state == FIP_ST_LINK_WAIT) {
- fip->state = FIP_ST_AUTO;
+ fip->state = fip->mode;
fip->last_link = 1;
fip->link = 1;
spin_unlock_bh(&fip->lock);
- LIBFCOE_FIP_DBG("%s", "setting AUTO mode.\n");
+ if (fip->state == FIP_ST_AUTO)
+ LIBFCOE_FIP_DBG(fip, "%s", "setting AUTO mode.\n");
fc_linkup(fip->lp);
fcoe_ctlr_solicit(fip, NULL);
} else
@@ -268,45 +275,23 @@
EXPORT_SYMBOL(fcoe_ctlr_link_up);
/**
- * fcoe_ctlr_reset() - Reset FIP.
- * @fip: FCoE controller.
- * @new_state: FIP state to be entered.
- *
- * Returns non-zero if the link was up and now isn't.
+ * fcoe_ctlr_reset() - Reset a FCoE controller
+ * @fip: The FCoE controller to reset
*/
-static int fcoe_ctlr_reset(struct fcoe_ctlr *fip, enum fip_state new_state)
+static void fcoe_ctlr_reset(struct fcoe_ctlr *fip)
{
- struct fc_lport *lp = fip->lp;
- int link_dropped;
-
- spin_lock_bh(&fip->lock);
fcoe_ctlr_reset_fcfs(fip);
del_timer(&fip->timer);
- fip->state = new_state;
fip->ctlr_ka_time = 0;
fip->port_ka_time = 0;
fip->sol_time = 0;
fip->flogi_oxid = FC_XID_UNKNOWN;
fip->map_dest = 0;
- fip->last_link = 0;
- link_dropped = fip->link;
- fip->link = 0;
- spin_unlock_bh(&fip->lock);
-
- if (link_dropped)
- fc_linkdown(lp);
-
- if (new_state == FIP_ST_ENABLED) {
- fcoe_ctlr_solicit(fip, NULL);
- fc_linkup(lp);
- link_dropped = 0;
- }
- return link_dropped;
}
/**
- * fcoe_ctlr_link_down() - Stop FCoE controller.
- * @fip: FCoE controller.
+ * fcoe_ctlr_link_down() - Stop a FCoE controller
+ * @fip: The FCoE controller to be stopped
*
* Returns non-zero if the link was up and now isn't.
*
@@ -315,15 +300,29 @@
*/
int fcoe_ctlr_link_down(struct fcoe_ctlr *fip)
{
- return fcoe_ctlr_reset(fip, FIP_ST_LINK_WAIT);
+ int link_dropped;
+
+ LIBFCOE_FIP_DBG(fip, "link down.\n");
+ spin_lock_bh(&fip->lock);
+ fcoe_ctlr_reset(fip);
+ link_dropped = fip->link;
+ fip->link = 0;
+ fip->last_link = 0;
+ fip->state = FIP_ST_LINK_WAIT;
+ spin_unlock_bh(&fip->lock);
+
+ if (link_dropped)
+ fc_linkdown(fip->lp);
+ return link_dropped;
}
EXPORT_SYMBOL(fcoe_ctlr_link_down);
/**
- * fcoe_ctlr_send_keep_alive() - Send a keep-alive to the selected FCF.
- * @fip: FCoE controller.
- * @ports: 0 for controller keep-alive, 1 for port keep-alive.
- * @sa: source MAC address.
+ * fcoe_ctlr_send_keep_alive() - Send a keep-alive to the selected FCF
+ * @fip: The FCoE controller to send the FKA on
+ * @lport: libfc fc_lport to send from
+ * @ports: 0 for controller keep-alive, 1 for port keep-alive
+ * @sa: The source MAC address
*
* A controller keep-alive is sent every fka_period (typically 8 seconds).
* The source MAC is the native MAC address.
@@ -332,7 +331,9 @@
* The source MAC is the assigned mapped source address.
* The destination is the FCF's F-port.
*/
-static void fcoe_ctlr_send_keep_alive(struct fcoe_ctlr *fip, int ports, u8 *sa)
+static void fcoe_ctlr_send_keep_alive(struct fcoe_ctlr *fip,
+ struct fc_lport *lport,
+ int ports, u8 *sa)
{
struct sk_buff *skb;
struct fip_kal {
@@ -350,8 +351,7 @@
if (!fcf || !fc_host_port_id(lp->host))
return;
- len = fcoe_ctlr_fcoe_size(fip) + sizeof(struct ethhdr);
- BUG_ON(len < sizeof(*kal) + sizeof(*vn));
+ len = sizeof(*kal) + ports * sizeof(*vn);
skb = dev_alloc_skb(len);
if (!skb)
return;
@@ -366,7 +366,7 @@
kal->fip.fip_op = htons(FIP_OP_CTRL);
kal->fip.fip_subcode = FIP_SC_KEEP_ALIVE;
kal->fip.fip_dl_len = htons((sizeof(kal->mac) +
- ports * sizeof(*vn)) / FIP_BPW);
+ ports * sizeof(*vn)) / FIP_BPW);
kal->fip.fip_flags = htons(FIP_FL_FPMA);
if (fip->spma)
kal->fip.fip_flags |= htons(FIP_FL_SPMA);
@@ -374,16 +374,14 @@
kal->mac.fd_desc.fip_dtype = FIP_DT_MAC;
kal->mac.fd_desc.fip_dlen = sizeof(kal->mac) / FIP_BPW;
memcpy(kal->mac.fd_mac, fip->ctl_src_addr, ETH_ALEN);
-
if (ports) {
vn = (struct fip_vn_desc *)(kal + 1);
vn->fd_desc.fip_dtype = FIP_DT_VN_ID;
vn->fd_desc.fip_dlen = sizeof(*vn) / FIP_BPW;
- memcpy(vn->fd_mac, fip->data_src_addr, ETH_ALEN);
+ memcpy(vn->fd_mac, fip->get_src_addr(lport), ETH_ALEN);
hton24(vn->fd_fc_id, fc_host_port_id(lp->host));
put_unaligned_be64(lp->wwpn, &vn->fd_wwpn);
}
-
skb_put(skb, len);
skb->protocol = htons(ETH_P_FIP);
skb_reset_mac_header(skb);
@@ -392,10 +390,10 @@
}
/**
- * fcoe_ctlr_encaps() - Encapsulate an ELS frame for FIP, without sending it.
- * @fip: FCoE controller.
- * @dtype: FIP descriptor type for the frame.
- * @skb: FCoE ELS frame including FC header but no FCoE headers.
+ * fcoe_ctlr_encaps() - Encapsulate an ELS frame for FIP, without sending it
+ * @fip: The FCoE controller for the ELS frame
+ * @dtype: The FIP descriptor type for the frame
+ * @skb: The FCoE ELS frame including FC header but no FCoE headers
*
* Returns non-zero error code on failure.
*
@@ -405,7 +403,7 @@
* Headroom includes the FIP encapsulation description, FIP header, and
* Ethernet header. The tailroom is for the FIP MAC descriptor.
*/
-static int fcoe_ctlr_encaps(struct fcoe_ctlr *fip,
+static int fcoe_ctlr_encaps(struct fcoe_ctlr *fip, struct fc_lport *lport,
u8 dtype, struct sk_buff *skb)
{
struct fip_encaps_head {
@@ -449,8 +447,8 @@
memset(mac, 0, sizeof(mac));
mac->fd_desc.fip_dtype = FIP_DT_MAC;
mac->fd_desc.fip_dlen = sizeof(*mac) / FIP_BPW;
- if (dtype != FIP_DT_FLOGI)
- memcpy(mac->fd_mac, fip->data_src_addr, ETH_ALEN);
+ if (dtype != FIP_DT_FLOGI && dtype != FIP_DT_FDISC)
+ memcpy(mac->fd_mac, fip->get_src_addr(lport), ETH_ALEN);
else if (fip->spma)
memcpy(mac->fd_mac, fip->ctl_src_addr, ETH_ALEN);
@@ -463,6 +461,7 @@
/**
* fcoe_ctlr_els_send() - Send an ELS frame encapsulated by FIP if appropriate.
* @fip: FCoE controller.
+ * @lport: libfc fc_lport to send from
* @skb: FCoE ELS frame including FC header but no FCoE headers.
*
* Returns a non-zero error code if the frame should not be sent.
@@ -471,11 +470,13 @@
* The caller must check that the length is a multiple of 4.
* The SKB must have enough headroom (28 bytes) and tailroom (8 bytes).
*/
-int fcoe_ctlr_els_send(struct fcoe_ctlr *fip, struct sk_buff *skb)
+int fcoe_ctlr_els_send(struct fcoe_ctlr *fip, struct fc_lport *lport,
+ struct sk_buff *skb)
{
struct fc_frame_header *fh;
u16 old_xid;
u8 op;
+ u8 mac[ETH_ALEN];
fh = (struct fc_frame_header *)skb->data;
op = *(u8 *)(fh + 1);
@@ -498,6 +499,8 @@
if (fip->state == FIP_ST_NON_FIP)
return 0;
+ if (!fip->sel_fcf)
+ goto drop;
switch (op) {
case ELS_FLOGI:
@@ -530,14 +533,15 @@
* FLOGI.
*/
fip->flogi_oxid = FC_XID_UNKNOWN;
- fc_fcoe_set_mac(fip->data_src_addr, fh->fh_s_id);
+ fc_fcoe_set_mac(mac, fh->fh_d_id);
+ fip->update_mac(lport, mac);
return 0;
default:
if (fip->state != FIP_ST_ENABLED)
goto drop;
return 0;
}
- if (fcoe_ctlr_encaps(fip, op, skb))
+ if (fcoe_ctlr_encaps(fip, lport, op, skb))
goto drop;
fip->send(fip, skb);
return -EINPROGRESS;
@@ -547,9 +551,9 @@
}
EXPORT_SYMBOL(fcoe_ctlr_els_send);
-/*
- * fcoe_ctlr_age_fcfs() - Reset and free all old FCFs for a controller.
- * @fip: FCoE controller.
+/**
+ * fcoe_ctlr_age_fcfs() - Reset and free all old FCFs for a controller
+ * @fip: The FCoE controller to free FCFs on
*
* Called with lock held.
*
@@ -558,14 +562,28 @@
* times its keep-alive period including fuzz.
*
* In addition, determine the time when an FCF selection can occur.
+ *
+ * Also, increment the MissDiscAdvCount when no advertisement is received
+ * for the corresponding FCF for 1.5 * FKA_ADV_PERIOD (FC-BB-5 LESB).
*/
static void fcoe_ctlr_age_fcfs(struct fcoe_ctlr *fip)
{
struct fcoe_fcf *fcf;
struct fcoe_fcf *next;
unsigned long sel_time = 0;
+ unsigned long mda_time = 0;
list_for_each_entry_safe(fcf, next, &fip->fcfs, list) {
+ mda_time = fcf->fka_period + (fcf->fka_period >> 1);
+ if ((fip->sel_fcf == fcf) &&
+ (time_after(jiffies, fcf->time + mda_time))) {
+ mod_timer(&fip->timer, jiffies + mda_time);
+ fc_lport_get_stats(fip->lp)->MissDiscAdvCount++;
+ printk(KERN_INFO "libfcoe: host%d: Missing Discovery "
+ "Advertisement for fab %llx count %lld\n",
+ fip->lp->host->host_no, fcf->fabric_name,
+ fc_lport_get_stats(fip->lp)->MissDiscAdvCount);
+ }
if (time_after(jiffies, fcf->time + fcf->fka_period * 3 +
msecs_to_jiffies(FIP_FCF_FUZZ * 3))) {
if (fip->sel_fcf == fcf)
@@ -574,6 +592,7 @@
WARN_ON(!fip->fcf_count);
fip->fcf_count--;
kfree(fcf);
+ fc_lport_get_stats(fip->lp)->VLinkFailureCount++;
} else if (fcoe_ctlr_mtu_valid(fcf) &&
(!sel_time || time_before(sel_time, fcf->time))) {
sel_time = fcf->time;
@@ -590,14 +609,16 @@
}
/**
- * fcoe_ctlr_parse_adv() - Decode a FIP advertisement into a new FCF entry.
- * @skb: received FIP advertisement frame
- * @fcf: resulting FCF entry.
+ * fcoe_ctlr_parse_adv() - Decode a FIP advertisement into a new FCF entry
+ * @fip: The FCoE controller receiving the advertisement
+ * @skb: The received FIP advertisement frame
+ * @fcf: The resulting FCF entry
*
* Returns zero on a valid parsed advertisement,
* otherwise returns non zero value.
*/
-static int fcoe_ctlr_parse_adv(struct sk_buff *skb, struct fcoe_fcf *fcf)
+static int fcoe_ctlr_parse_adv(struct fcoe_ctlr *fip,
+ struct sk_buff *skb, struct fcoe_fcf *fcf)
{
struct fip_header *fiph;
struct fip_desc *desc = NULL;
@@ -636,7 +657,7 @@
((struct fip_mac_desc *)desc)->fd_mac,
ETH_ALEN);
if (!is_valid_ether_addr(fcf->fcf_mac)) {
- LIBFCOE_FIP_DBG("Invalid MAC address "
+ LIBFCOE_FIP_DBG(fip, "Invalid MAC address "
"in FIP adv\n");
return -EINVAL;
}
@@ -659,6 +680,8 @@
if (dlen != sizeof(struct fip_fka_desc))
goto len_err;
fka = (struct fip_fka_desc *)desc;
+ if (fka->fd_flags & FIP_FKA_ADV_D)
+ fcf->fd_flags = 1;
t = ntohl(fka->fd_fka_period);
if (t >= FCOE_CTLR_MIN_FKA)
fcf->fka_period = msecs_to_jiffies(t);
@@ -670,7 +693,7 @@
case FIP_DT_LOGO:
case FIP_DT_ELP:
default:
- LIBFCOE_FIP_DBG("unexpected descriptor type %x "
+ LIBFCOE_FIP_DBG(fip, "unexpected descriptor type %x "
"in FIP adv\n", desc->fip_dtype);
/* standard says ignore unknown descriptors >= 128 */
if (desc->fip_dtype < FIP_DT_VENDOR_BASE)
@@ -687,15 +710,15 @@
return 0;
len_err:
- LIBFCOE_FIP_DBG("FIP length error in descriptor type %x len %zu\n",
+ LIBFCOE_FIP_DBG(fip, "FIP length error in descriptor type %x len %zu\n",
desc->fip_dtype, dlen);
return -EINVAL;
}
/**
- * fcoe_ctlr_recv_adv() - Handle an incoming advertisement.
- * @fip: FCoE controller.
- * @skb: Received FIP packet.
+ * fcoe_ctlr_recv_adv() - Handle an incoming advertisement
+ * @fip: The FCoE controller receiving the advertisement
+ * @skb: The received FIP packet
*/
static void fcoe_ctlr_recv_adv(struct fcoe_ctlr *fip, struct sk_buff *skb)
{
@@ -706,7 +729,7 @@
int first = 0;
int mtu_valid;
- if (fcoe_ctlr_parse_adv(skb, &new))
+ if (fcoe_ctlr_parse_adv(fip, skb, &new))
return;
spin_lock_bh(&fip->lock);
@@ -752,7 +775,7 @@
mtu_valid = fcoe_ctlr_mtu_valid(fcf);
fcf->time = jiffies;
if (!found) {
- LIBFCOE_FIP_DBG("New FCF for fab %llx map %x val %d\n",
+ LIBFCOE_FIP_DBG(fip, "New FCF for fab %llx map %x val %d\n",
fcf->fabric_name, fcf->fc_map, mtu_valid);
}
@@ -778,7 +801,7 @@
*/
if (mtu_valid && !fip->sel_time && fcoe_ctlr_fcf_usable(fcf)) {
fip->sel_time = jiffies +
- msecs_to_jiffies(FCOE_CTLR_START_DELAY);
+ msecs_to_jiffies(FCOE_CTLR_START_DELAY);
if (!timer_pending(&fip->timer) ||
time_before(fip->sel_time, fip->timer.expires))
mod_timer(&fip->timer, fip->sel_time);
@@ -788,15 +811,15 @@
}
/**
- * fcoe_ctlr_recv_els() - Handle an incoming FIP-encapsulated ELS frame.
- * @fip: FCoE controller.
- * @skb: Received FIP packet.
+ * fcoe_ctlr_recv_els() - Handle an incoming FIP encapsulated ELS frame
+ * @fip: The FCoE controller which received the packet
+ * @skb: The received FIP packet
*/
static void fcoe_ctlr_recv_els(struct fcoe_ctlr *fip, struct sk_buff *skb)
{
- struct fc_lport *lp = fip->lp;
+ struct fc_lport *lport = fip->lp;
struct fip_header *fiph;
- struct fc_frame *fp;
+ struct fc_frame *fp = (struct fc_frame *)skb;
struct fc_frame_header *fh = NULL;
struct fip_desc *desc;
struct fip_encaps *els;
@@ -831,10 +854,11 @@
((struct fip_mac_desc *)desc)->fd_mac,
ETH_ALEN);
if (!is_valid_ether_addr(granted_mac)) {
- LIBFCOE_FIP_DBG("Invalid MAC address "
+ LIBFCOE_FIP_DBG(fip, "Invalid MAC address "
"in FIP ELS\n");
goto drop;
}
+ memcpy(fr_cb(fp)->granted_mac, granted_mac, ETH_ALEN);
break;
case FIP_DT_FLOGI:
case FIP_DT_FDISC:
@@ -850,7 +874,7 @@
els_dtype = desc->fip_dtype;
break;
default:
- LIBFCOE_FIP_DBG("unexpected descriptor type %x "
+ LIBFCOE_FIP_DBG(fip, "unexpected descriptor type %x "
"in FIP adv\n", desc->fip_dtype);
/* standard says ignore unknown descriptors >= 128 */
if (desc->fip_dtype < FIP_DT_VENDOR_BASE)
@@ -867,11 +891,8 @@
if (els_dtype == FIP_DT_FLOGI && sub == FIP_SC_REP &&
fip->flogi_oxid == ntohs(fh->fh_ox_id) &&
- els_op == ELS_LS_ACC && is_valid_ether_addr(granted_mac)) {
+ els_op == ELS_LS_ACC && is_valid_ether_addr(granted_mac))
fip->flogi_oxid = FC_XID_UNKNOWN;
- fip->update_mac(fip, fip->data_src_addr, granted_mac);
- memcpy(fip->data_src_addr, granted_mac, ETH_ALEN);
- }
/*
* Convert skb into an fc_frame containing only the ELS.
@@ -882,32 +903,32 @@
fc_frame_init(fp);
fr_sof(fp) = FC_SOF_I3;
fr_eof(fp) = FC_EOF_T;
- fr_dev(fp) = lp;
+ fr_dev(fp) = lport;
- stats = fc_lport_get_stats(lp);
+ stats = fc_lport_get_stats(lport);
stats->RxFrames++;
stats->RxWords += skb->len / FIP_BPW;
- fc_exch_recv(lp, fp);
+ fc_exch_recv(lport, fp);
return;
len_err:
- LIBFCOE_FIP_DBG("FIP length error in descriptor type %x len %zu\n",
+ LIBFCOE_FIP_DBG(fip, "FIP length error in descriptor type %x len %zu\n",
desc->fip_dtype, dlen);
drop:
kfree_skb(skb);
}
/**
- * fcoe_ctlr_recv_els() - Handle an incoming link reset frame.
- * @fip: FCoE controller.
- * @fh: Received FIP header.
+ * fcoe_ctlr_recv_els() - Handle an incoming link reset frame
+ * @fip: The FCoE controller that received the frame
+ * @fh: The received FIP header
*
* There may be multiple VN_Port descriptors.
* The overall length has already been checked.
*/
static void fcoe_ctlr_recv_clr_vlink(struct fcoe_ctlr *fip,
- struct fip_header *fh)
+ struct fip_header *fh)
{
struct fip_desc *desc;
struct fip_mac_desc *mp;
@@ -916,13 +937,13 @@
size_t rlen;
size_t dlen;
struct fcoe_fcf *fcf = fip->sel_fcf;
- struct fc_lport *lp = fip->lp;
+ struct fc_lport *lport = fip->lp;
u32 desc_mask;
- LIBFCOE_FIP_DBG("Clear Virtual Link received\n");
+ LIBFCOE_FIP_DBG(fip, "Clear Virtual Link received\n");
if (!fcf)
return;
- if (!fcf || !fc_host_port_id(lp->host))
+ if (!fcf || !fc_host_port_id(lport->host))
return;
/*
@@ -958,9 +979,10 @@
if (dlen < sizeof(*vp))
return;
if (compare_ether_addr(vp->fd_mac,
- fip->data_src_addr) == 0 &&
- get_unaligned_be64(&vp->fd_wwpn) == lp->wwpn &&
- ntoh24(vp->fd_fc_id) == fc_host_port_id(lp->host))
+ fip->get_src_addr(lport)) == 0 &&
+ get_unaligned_be64(&vp->fd_wwpn) == lport->wwpn &&
+ ntoh24(vp->fd_fc_id) ==
+ fc_host_port_id(lport->host))
desc_mask &= ~BIT(FIP_DT_VN_ID);
break;
default:
@@ -977,33 +999,39 @@
* reset only if all required descriptors were present and valid.
*/
if (desc_mask) {
- LIBFCOE_FIP_DBG("missing descriptors mask %x\n", desc_mask);
+ LIBFCOE_FIP_DBG(fip, "missing descriptors mask %x\n",
+ desc_mask);
} else {
- LIBFCOE_FIP_DBG("performing Clear Virtual Link\n");
- fcoe_ctlr_reset(fip, FIP_ST_ENABLED);
+ LIBFCOE_FIP_DBG(fip, "performing Clear Virtual Link\n");
+
+ spin_lock_bh(&fip->lock);
+ fc_lport_get_stats(lport)->VLinkFailureCount++;
+ fcoe_ctlr_reset(fip);
+ spin_unlock_bh(&fip->lock);
+
+ fc_lport_reset(fip->lp);
+ fcoe_ctlr_solicit(fip, NULL);
}
}
/**
- * fcoe_ctlr_recv() - Receive a FIP frame.
- * @fip: FCoE controller.
- * @skb: Received FIP packet.
+ * fcoe_ctlr_recv() - Receive a FIP packet
+ * @fip: The FCoE controller that received the packet
+ * @skb: The received FIP packet
*
- * This is called from NET_RX_SOFTIRQ.
+ * This may be called from either NET_RX_SOFTIRQ or IRQ.
*/
void fcoe_ctlr_recv(struct fcoe_ctlr *fip, struct sk_buff *skb)
{
- spin_lock_bh(&fip->fip_recv_list.lock);
- __skb_queue_tail(&fip->fip_recv_list, skb);
- spin_unlock_bh(&fip->fip_recv_list.lock);
+ skb_queue_tail(&fip->fip_recv_list, skb);
schedule_work(&fip->recv_work);
}
EXPORT_SYMBOL(fcoe_ctlr_recv);
/**
- * fcoe_ctlr_recv_handler() - Receive a FIP frame.
- * @fip: FCoE controller.
- * @skb: Received FIP packet.
+ * fcoe_ctlr_recv_handler() - Receive a FIP frame
+ * @fip: The FCoE controller that received the frame
+ * @skb: The received FIP frame
*
* Returns non-zero if the frame is dropped.
*/
@@ -1038,7 +1066,7 @@
fip->map_dest = 0;
fip->state = FIP_ST_ENABLED;
state = FIP_ST_ENABLED;
- LIBFCOE_FIP_DBG("Using FIP mode\n");
+ LIBFCOE_FIP_DBG(fip, "Using FIP mode\n");
}
spin_unlock_bh(&fip->lock);
if (state != FIP_ST_ENABLED)
@@ -1060,8 +1088,8 @@
}
/**
- * fcoe_ctlr_select() - Select the best FCF, if possible.
- * @fip: FCoE controller.
+ * fcoe_ctlr_select() - Select the best FCF (if possible)
+ * @fip: The FCoE controller
*
* If there are conflicting advertisements, no FCF can be chosen.
*
@@ -1073,11 +1101,11 @@
struct fcoe_fcf *best = NULL;
list_for_each_entry(fcf, &fip->fcfs, list) {
- LIBFCOE_FIP_DBG("consider FCF for fab %llx VFID %d map %x "
+ LIBFCOE_FIP_DBG(fip, "consider FCF for fab %llx VFID %d map %x "
"val %d\n", fcf->fabric_name, fcf->vfid,
fcf->fc_map, fcoe_ctlr_mtu_valid(fcf));
if (!fcoe_ctlr_fcf_usable(fcf)) {
- LIBFCOE_FIP_DBG("FCF for fab %llx map %x %svalid "
+ LIBFCOE_FIP_DBG(fip, "FCF for fab %llx map %x %svalid "
"%savailable\n", fcf->fabric_name,
fcf->fc_map, (fcf->flags & FIP_FL_SOL)
? "" : "in", (fcf->flags & FIP_FL_AVAIL)
@@ -1091,7 +1119,7 @@
if (fcf->fabric_name != best->fabric_name ||
fcf->vfid != best->vfid ||
fcf->fc_map != best->fc_map) {
- LIBFCOE_FIP_DBG("Conflicting fabric, VFID, "
+ LIBFCOE_FIP_DBG(fip, "Conflicting fabric, VFID, "
"or FC-MAP\n");
return;
}
@@ -1102,8 +1130,8 @@
}
/**
- * fcoe_ctlr_timeout() - FIP timer function.
- * @arg: &fcoe_ctlr pointer.
+ * fcoe_ctlr_timeout() - FIP timeout handler
+ * @arg: The FCoE controller that timed out
*
* Ages FCFs. Triggers FCF selection if possible. Sends keep-alives.
*/
@@ -1113,8 +1141,6 @@
struct fcoe_fcf *sel;
struct fcoe_fcf *fcf;
unsigned long next_timer = jiffies + msecs_to_jiffies(FIP_VN_KA_PERIOD);
- u8 send_ctlr_ka;
- u8 send_port_ka;
spin_lock_bh(&fip->lock);
if (fip->state == FIP_ST_DISABLED) {
@@ -1140,53 +1166,47 @@
fip->lp->host->host_no, sel->fcf_mac);
memcpy(fip->dest_addr, sel->fcf_mac, ETH_ALEN);
fip->port_ka_time = jiffies +
- msecs_to_jiffies(FIP_VN_KA_PERIOD);
+ msecs_to_jiffies(FIP_VN_KA_PERIOD);
fip->ctlr_ka_time = jiffies + sel->fka_period;
- fip->link = 1;
} else {
printk(KERN_NOTICE "libfcoe: host%d: "
- "FIP Fibre-Channel Forwarder timed out. "
+ "FIP Fibre-Channel Forwarder timed out. "
"Starting FCF discovery.\n",
fip->lp->host->host_no);
- fip->link = 0;
+ fip->reset_req = 1;
+ schedule_work(&fip->link_work);
}
- schedule_work(&fip->link_work);
}
- send_ctlr_ka = 0;
- send_port_ka = 0;
- if (sel) {
+ if (sel && !sel->fd_flags) {
if (time_after_eq(jiffies, fip->ctlr_ka_time)) {
fip->ctlr_ka_time = jiffies + sel->fka_period;
- send_ctlr_ka = 1;
+ fip->send_ctlr_ka = 1;
}
if (time_after(next_timer, fip->ctlr_ka_time))
next_timer = fip->ctlr_ka_time;
if (time_after_eq(jiffies, fip->port_ka_time)) {
fip->port_ka_time += jiffies +
- msecs_to_jiffies(FIP_VN_KA_PERIOD);
- send_port_ka = 1;
+ msecs_to_jiffies(FIP_VN_KA_PERIOD);
+ fip->send_port_ka = 1;
}
if (time_after(next_timer, fip->port_ka_time))
next_timer = fip->port_ka_time;
mod_timer(&fip->timer, next_timer);
} else if (fip->sel_time) {
next_timer = fip->sel_time +
- msecs_to_jiffies(FCOE_CTLR_START_DELAY);
+ msecs_to_jiffies(FCOE_CTLR_START_DELAY);
mod_timer(&fip->timer, next_timer);
}
+ if (fip->send_ctlr_ka || fip->send_port_ka)
+ schedule_work(&fip->link_work);
spin_unlock_bh(&fip->lock);
-
- if (send_ctlr_ka)
- fcoe_ctlr_send_keep_alive(fip, 0, fip->ctl_src_addr);
- if (send_port_ka)
- fcoe_ctlr_send_keep_alive(fip, 1, fip->data_src_addr);
}
/**
- * fcoe_ctlr_link_work() - worker thread function for link changes.
- * @work: pointer to link_work member inside &fcoe_ctlr.
+ * fcoe_ctlr_link_work() - Worker thread function for link changes
+ * @work: Handle to a FCoE controller
*
* See if the link status has changed and if so, report it.
*
@@ -1196,27 +1216,49 @@
static void fcoe_ctlr_link_work(struct work_struct *work)
{
struct fcoe_ctlr *fip;
+ struct fc_lport *vport;
+ u8 *mac;
int link;
int last_link;
+ int reset;
fip = container_of(work, struct fcoe_ctlr, link_work);
spin_lock_bh(&fip->lock);
last_link = fip->last_link;
link = fip->link;
fip->last_link = link;
+ reset = fip->reset_req;
+ fip->reset_req = 0;
spin_unlock_bh(&fip->lock);
if (last_link != link) {
if (link)
fc_linkup(fip->lp);
else
- fcoe_ctlr_reset(fip, FIP_ST_LINK_WAIT);
+ fc_linkdown(fip->lp);
+ } else if (reset && link)
+ fc_lport_reset(fip->lp);
+
+ if (fip->send_ctlr_ka) {
+ fip->send_ctlr_ka = 0;
+ fcoe_ctlr_send_keep_alive(fip, NULL, 0, fip->ctl_src_addr);
+ }
+ if (fip->send_port_ka) {
+ fip->send_port_ka = 0;
+ mutex_lock(&fip->lp->lp_mutex);
+ mac = fip->get_src_addr(fip->lp);
+ fcoe_ctlr_send_keep_alive(fip, fip->lp, 1, mac);
+ list_for_each_entry(vport, &fip->lp->vports, list) {
+ mac = fip->get_src_addr(vport);
+ fcoe_ctlr_send_keep_alive(fip, vport, 1, mac);
+ }
+ mutex_unlock(&fip->lp->lp_mutex);
}
}
/**
- * fcoe_ctlr_recv_work() - Worker thread function for receiving FIP frames.
- * @recv_work: pointer to recv_work member inside &fcoe_ctlr.
+ * fcoe_ctlr_recv_work() - Worker thread function for receiving FIP frames
+ * @recv_work: Handle to a FCoE controller
*/
static void fcoe_ctlr_recv_work(struct work_struct *recv_work)
{
@@ -1224,20 +1266,14 @@
struct sk_buff *skb;
fip = container_of(recv_work, struct fcoe_ctlr, recv_work);
- spin_lock_bh(&fip->fip_recv_list.lock);
- while ((skb = __skb_dequeue(&fip->fip_recv_list))) {
- spin_unlock_bh(&fip->fip_recv_list.lock);
+ while ((skb = skb_dequeue(&fip->fip_recv_list)))
fcoe_ctlr_recv_handler(fip, skb);
- spin_lock_bh(&fip->fip_recv_list.lock);
- }
- spin_unlock_bh(&fip->fip_recv_list.lock);
}
/**
- * fcoe_ctlr_recv_flogi() - snoop Pre-FIP receipt of FLOGI response or request.
- * @fip: FCoE controller.
- * @fp: FC frame.
- * @sa: Ethernet source MAC address from received FCoE frame.
+ * fcoe_ctlr_recv_flogi() - Snoop pre-FIP receipt of FLOGI response
+ * @fip: The FCoE controller
+ * @fp: The FC frame to snoop
*
* Snoop potential response to FLOGI or even incoming FLOGI.
*
@@ -1245,15 +1281,18 @@
* by fip->flogi_oxid != FC_XID_UNKNOWN.
*
* The caller is responsible for freeing the frame.
+ * Fill in the granted_mac address.
*
* Return non-zero if the frame should not be delivered to libfc.
*/
-int fcoe_ctlr_recv_flogi(struct fcoe_ctlr *fip, struct fc_frame *fp, u8 *sa)
+int fcoe_ctlr_recv_flogi(struct fcoe_ctlr *fip, struct fc_lport *lport,
+ struct fc_frame *fp)
{
struct fc_frame_header *fh;
u8 op;
- u8 mac[ETH_ALEN];
+ u8 *sa;
+ sa = eth_hdr(&fp->skb)->h_source;
fh = fc_frame_header_get(fp);
if (fh->fh_type != FC_TYPE_ELS)
return 0;
@@ -1268,7 +1307,8 @@
return -EINVAL;
}
fip->state = FIP_ST_NON_FIP;
- LIBFCOE_FIP_DBG("received FLOGI LS_ACC using non-FIP mode\n");
+ LIBFCOE_FIP_DBG(fip,
+ "received FLOGI LS_ACC using non-FIP mode\n");
/*
* FLOGI accepted.
@@ -1283,11 +1323,8 @@
fip->map_dest = 0;
}
fip->flogi_oxid = FC_XID_UNKNOWN;
- memcpy(mac, fip->data_src_addr, ETH_ALEN);
- fc_fcoe_set_mac(fip->data_src_addr, fh->fh_d_id);
spin_unlock_bh(&fip->lock);
-
- fip->update_mac(fip, mac, fip->data_src_addr);
+ fc_fcoe_set_mac(fr_cb(fp)->granted_mac, fh->fh_d_id);
} else if (op == ELS_FLOGI && fh->fh_r_ctl == FC_RCTL_ELS_REQ && sa) {
/*
* Save source MAC for point-to-point responses.
@@ -1297,7 +1334,7 @@
memcpy(fip->dest_addr, sa, ETH_ALEN);
fip->map_dest = 0;
if (fip->state == FIP_ST_NON_FIP)
- LIBFCOE_FIP_DBG("received FLOGI REQ, "
+ LIBFCOE_FIP_DBG(fip, "received FLOGI REQ, "
"using non-FIP mode\n");
fip->state = FIP_ST_NON_FIP;
}
@@ -1308,10 +1345,10 @@
EXPORT_SYMBOL(fcoe_ctlr_recv_flogi);
/**
- * fcoe_wwn_from_mac() - Converts 48-bit IEEE MAC address to 64-bit FC WWN.
- * @mac: mac address
- * @scheme: check port
- * @port: port indicator for converting
+ * fcoe_wwn_from_mac() - Converts a 48-bit IEEE MAC address to a 64-bit FC WWN
+ * @mac: The MAC address to convert
+ * @scheme: The scheme to use when converting
+ * @port: The port indicator for converting
*
* Returns: u64 fc world wide name
*/
@@ -1349,24 +1386,26 @@
EXPORT_SYMBOL_GPL(fcoe_wwn_from_mac);
/**
- * fcoe_libfc_config() - sets up libfc related properties for lport
- * @lp: ptr to the fc_lport
- * @tt: libfc function template
+ * fcoe_libfc_config() - Sets up libfc related properties for local port
+ * @lp: The local port to configure libfc for
+ * @tt: The libfc function template
*
* Returns : 0 for success
*/
-int fcoe_libfc_config(struct fc_lport *lp, struct libfc_function_template *tt)
+int fcoe_libfc_config(struct fc_lport *lport,
+ struct libfc_function_template *tt)
{
/* Set the function pointers set by the LLDD */
- memcpy(&lp->tt, tt, sizeof(*tt));
- if (fc_fcp_init(lp))
+ memcpy(&lport->tt, tt, sizeof(*tt));
+ if (fc_fcp_init(lport))
return -ENOMEM;
- fc_exch_init(lp);
- fc_elsct_init(lp);
- fc_lport_init(lp);
- fc_rport_init(lp);
- fc_disc_init(lp);
+ fc_exch_init(lport);
+ fc_elsct_init(lport);
+ fc_lport_init(lport);
+ fc_rport_init(lport);
+ fc_disc_init(lport);
return 0;
}
EXPORT_SYMBOL_GPL(fcoe_libfc_config);
+
diff --git a/drivers/scsi/fnic/fnic.h b/drivers/scsi/fnic/fnic.h
index e4c0a3d..bb208a6 100644
--- a/drivers/scsi/fnic/fnic.h
+++ b/drivers/scsi/fnic/fnic.h
@@ -22,6 +22,7 @@
#include <linux/netdevice.h>
#include <linux/workqueue.h>
#include <scsi/libfc.h>
+#include <scsi/libfcoe.h>
#include "fnic_io.h"
#include "fnic_res.h"
#include "vnic_dev.h"
@@ -44,7 +45,7 @@
#define FNIC_IO_LOCKS 64 /* IO locks: power of 2 */
#define FNIC_DFLT_QUEUE_DEPTH 32
#define FNIC_STATS_RATE_LIMIT 4 /* limit rate at which stats are pulled up */
-
+#define FNIC_MAX_CMD_LEN 16 /* Supported CDB length */
/*
* Tag bits used for special requests.
*/
@@ -145,6 +146,7 @@
/* Per-instance private data structure */
struct fnic {
struct fc_lport *lport;
+ struct fcoe_ctlr ctlr; /* FIP FCoE controller structure */
struct vnic_dev_bar bar0;
struct msix_entry msix_entry[FNIC_MSIX_INTR_MAX];
@@ -162,23 +164,16 @@
unsigned int wq_count;
unsigned int cq_count;
- u32 fcoui_mode:1; /* use fcoui address*/
u32 vlan_hw_insert:1; /* let hw insert the tag */
u32 in_remove:1; /* fnic device in removal */
u32 stop_rx_link_events:1; /* stop proc. rx frames, link events */
struct completion *remove_wait; /* device remove thread blocks */
- struct fc_frame *flogi;
- struct fc_frame *flogi_resp;
- u16 flogi_oxid;
- unsigned long s_id;
enum fnic_state state;
spinlock_t fnic_lock;
u16 vlan_id; /* VLAN tag including priority */
- u8 mac_addr[ETH_ALEN];
- u8 dest_addr[ETH_ALEN];
u8 data_src_addr[ETH_ALEN];
u64 fcp_input_bytes; /* internal statistic */
u64 fcp_output_bytes; /* internal statistic */
@@ -205,6 +200,7 @@
struct work_struct link_work;
struct work_struct frame_work;
struct sk_buff_head frame_queue;
+ struct sk_buff_head tx_queue;
/* copy work queue cache line section */
____cacheline_aligned struct vnic_wq_copy wq_copy[FNIC_WQ_COPY_MAX];
@@ -224,6 +220,11 @@
____cacheline_aligned struct vnic_intr intr[FNIC_MSIX_INTR_MAX];
};
+static inline struct fnic *fnic_from_ctlr(struct fcoe_ctlr *fip)
+{
+ return container_of(fip, struct fnic, ctlr);
+}
+
extern struct workqueue_struct *fnic_event_queue;
extern struct device_attribute *fnic_attrs[];
@@ -239,7 +240,11 @@
int fnic_rq_cmpl_handler(struct fnic *fnic, int);
int fnic_alloc_rq_frame(struct vnic_rq *rq);
void fnic_free_rq_buf(struct vnic_rq *rq, struct vnic_rq_buf *buf);
-int fnic_send_frame(struct fnic *fnic, struct fc_frame *fp);
+void fnic_flush_tx(struct fnic *);
+void fnic_eth_send(struct fcoe_ctlr *, struct sk_buff *skb);
+void fnic_set_port_id(struct fc_lport *, u32, struct fc_frame *);
+void fnic_update_mac(struct fc_lport *, u8 *new);
+void fnic_update_mac_locked(struct fnic *, u8 *new);
int fnic_queuecommand(struct scsi_cmnd *, void (*done)(struct scsi_cmnd *));
int fnic_abort_cmd(struct scsi_cmnd *);
@@ -252,7 +257,7 @@
void fnic_exch_mgr_reset(struct fc_lport *, u32, u32);
int fnic_wq_copy_cmpl_handler(struct fnic *fnic, int);
int fnic_wq_cmpl_handler(struct fnic *fnic, int);
-int fnic_flogi_reg_handler(struct fnic *fnic);
+int fnic_flogi_reg_handler(struct fnic *fnic, u32);
void fnic_wq_copy_cleanup_handler(struct vnic_wq_copy *wq,
struct fcpio_host_req *desc);
int fnic_fw_reset_handler(struct fnic *fnic);
diff --git a/drivers/scsi/fnic/fnic_fcs.c b/drivers/scsi/fnic/fnic_fcs.c
index 50db3e3..54f8d0e 100644
--- a/drivers/scsi/fnic/fnic_fcs.c
+++ b/drivers/scsi/fnic/fnic_fcs.c
@@ -23,6 +23,7 @@
#include <linux/if_ether.h>
#include <linux/if_vlan.h>
#include <linux/workqueue.h>
+#include <scsi/fc/fc_fip.h>
#include <scsi/fc/fc_els.h>
#include <scsi/fc/fc_fcoe.h>
#include <scsi/fc_frame.h>
@@ -34,6 +35,8 @@
struct workqueue_struct *fnic_event_queue;
+static void fnic_set_eth_mode(struct fnic *);
+
void fnic_handle_link(struct work_struct *work)
{
struct fnic *fnic = container_of(work, struct fnic, link_work);
@@ -64,10 +67,10 @@
spin_unlock_irqrestore(&fnic->fnic_lock, flags);
FNIC_FCS_DBG(KERN_DEBUG, fnic->lport->host,
"link down\n");
- fc_linkdown(fnic->lport);
+ fcoe_ctlr_link_down(&fnic->ctlr);
FNIC_FCS_DBG(KERN_DEBUG, fnic->lport->host,
"link up\n");
- fc_linkup(fnic->lport);
+ fcoe_ctlr_link_up(&fnic->ctlr);
} else
/* UP -> UP */
spin_unlock_irqrestore(&fnic->fnic_lock, flags);
@@ -76,13 +79,13 @@
/* DOWN -> UP */
spin_unlock_irqrestore(&fnic->fnic_lock, flags);
FNIC_FCS_DBG(KERN_DEBUG, fnic->lport->host, "link up\n");
- fc_linkup(fnic->lport);
+ fcoe_ctlr_link_up(&fnic->ctlr);
} else {
/* UP -> DOWN */
fnic->lport->host_stats.link_failure_count++;
spin_unlock_irqrestore(&fnic->fnic_lock, flags);
FNIC_FCS_DBG(KERN_DEBUG, fnic->lport->host, "link down\n");
- fc_linkdown(fnic->lport);
+ fcoe_ctlr_link_down(&fnic->ctlr);
}
}
@@ -107,197 +110,179 @@
return;
}
fp = (struct fc_frame *)skb;
- /* if Flogi resp frame, register the address */
- if (fr_flags(fp)) {
- vnic_dev_add_addr(fnic->vdev,
- fnic->data_src_addr);
- fr_flags(fp) = 0;
+
+ /*
+ * If we're in a transitional state, just re-queue and return.
+ * The queue will be serviced when we get to a stable state.
+ */
+ if (fnic->state != FNIC_IN_FC_MODE &&
+ fnic->state != FNIC_IN_ETH_MODE) {
+ skb_queue_head(&fnic->frame_queue, skb);
+ spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+ return;
}
spin_unlock_irqrestore(&fnic->fnic_lock, flags);
fc_exch_recv(lp, fp);
}
-
}
-static inline void fnic_import_rq_fc_frame(struct sk_buff *skb,
- u32 len, u8 sof, u8 eof)
-{
- struct fc_frame *fp = (struct fc_frame *)skb;
-
- skb_trim(skb, len);
- fr_eof(fp) = eof;
- fr_sof(fp) = sof;
-}
-
-
-static inline int fnic_import_rq_eth_pkt(struct sk_buff *skb, u32 len)
+/**
+ * fnic_import_rq_eth_pkt() - handle received FCoE or FIP frame.
+ * @fnic: fnic instance.
+ * @skb: Ethernet Frame.
+ */
+static inline int fnic_import_rq_eth_pkt(struct fnic *fnic, struct sk_buff *skb)
{
struct fc_frame *fp;
struct ethhdr *eh;
- struct vlan_ethhdr *vh;
struct fcoe_hdr *fcoe_hdr;
struct fcoe_crc_eof *ft;
- u32 transport_len = 0;
+ /*
+ * Undo VLAN encapsulation if present.
+ */
eh = (struct ethhdr *)skb->data;
- vh = (struct vlan_ethhdr *)skb->data;
- if (vh->h_vlan_proto == htons(ETH_P_8021Q) &&
- vh->h_vlan_encapsulated_proto == htons(ETH_P_FCOE)) {
- skb_pull(skb, sizeof(struct vlan_ethhdr));
- transport_len += sizeof(struct vlan_ethhdr);
- } else if (eh->h_proto == htons(ETH_P_FCOE)) {
- transport_len += sizeof(struct ethhdr);
- skb_pull(skb, sizeof(struct ethhdr));
- } else
- return -1;
+ if (eh->h_proto == htons(ETH_P_8021Q)) {
+ memmove((u8 *)eh + VLAN_HLEN, eh, ETH_ALEN * 2);
+ eh = (struct ethhdr *)skb_pull(skb, VLAN_HLEN);
+ skb_reset_mac_header(skb);
+ }
+ if (eh->h_proto == htons(ETH_P_FIP)) {
+ skb_pull(skb, sizeof(*eh));
+ fcoe_ctlr_recv(&fnic->ctlr, skb);
+ return 1; /* let caller know packet was used */
+ }
+ if (eh->h_proto != htons(ETH_P_FCOE))
+ goto drop;
+ skb_set_network_header(skb, sizeof(*eh));
+ skb_pull(skb, sizeof(*eh));
fcoe_hdr = (struct fcoe_hdr *)skb->data;
if (FC_FCOE_DECAPS_VER(fcoe_hdr) != FC_FCOE_VER)
- return -1;
+ goto drop;
fp = (struct fc_frame *)skb;
fc_frame_init(fp);
fr_sof(fp) = fcoe_hdr->fcoe_sof;
skb_pull(skb, sizeof(struct fcoe_hdr));
- transport_len += sizeof(struct fcoe_hdr);
+ skb_reset_transport_header(skb);
- ft = (struct fcoe_crc_eof *)(skb->data + len -
- transport_len - sizeof(*ft));
+ ft = (struct fcoe_crc_eof *)(skb->data + skb->len - sizeof(*ft));
fr_eof(fp) = ft->fcoe_eof;
- skb_trim(skb, len - transport_len - sizeof(*ft));
+ skb_trim(skb, skb->len - sizeof(*ft));
return 0;
+drop:
+ dev_kfree_skb_irq(skb);
+ return -1;
}
-static inline int fnic_handle_flogi_resp(struct fnic *fnic,
- struct fc_frame *fp)
+/**
+ * fnic_update_mac_locked() - set data MAC address and filters.
+ * @fnic: fnic instance.
+ * @new: newly-assigned FCoE MAC address.
+ *
+ * Called with the fnic lock held.
+ */
+void fnic_update_mac_locked(struct fnic *fnic, u8 *new)
{
- u8 mac[ETH_ALEN] = FC_FCOE_FLOGI_MAC;
- struct ethhdr *eth_hdr;
- struct fc_frame_header *fh;
- int ret = 0;
- unsigned long flags;
- struct fc_frame *old_flogi_resp = NULL;
+ u8 *ctl = fnic->ctlr.ctl_src_addr;
+ u8 *data = fnic->data_src_addr;
- fh = (struct fc_frame_header *)fr_hdr(fp);
+ if (is_zero_ether_addr(new))
+ new = ctl;
+ if (!compare_ether_addr(data, new))
+ return;
+ FNIC_FCS_DBG(KERN_DEBUG, fnic->lport->host, "update_mac %pM\n", new);
+ if (!is_zero_ether_addr(data) && compare_ether_addr(data, ctl))
+ vnic_dev_del_addr(fnic->vdev, data);
+ memcpy(data, new, ETH_ALEN);
+ if (compare_ether_addr(new, ctl))
+ vnic_dev_add_addr(fnic->vdev, new);
+}
- spin_lock_irqsave(&fnic->fnic_lock, flags);
+/**
+ * fnic_update_mac() - set data MAC address and filters.
+ * @lport: local port.
+ * @new: newly-assigned FCoE MAC address.
+ */
+void fnic_update_mac(struct fc_lport *lport, u8 *new)
+{
+ struct fnic *fnic = lport_priv(lport);
- if (fnic->state == FNIC_IN_ETH_MODE) {
+ spin_lock_irq(&fnic->fnic_lock);
+ fnic_update_mac_locked(fnic, new);
+ spin_unlock_irq(&fnic->fnic_lock);
+}
- /*
- * Check if oxid matches on taking the lock. A new Flogi
- * issued by libFC might have changed the fnic cached oxid
- */
- if (fnic->flogi_oxid != ntohs(fh->fh_ox_id)) {
- FNIC_FCS_DBG(KERN_DEBUG, fnic->lport->host,
- "Flogi response oxid not"
- " matching cached oxid, dropping frame"
- "\n");
- ret = -1;
- spin_unlock_irqrestore(&fnic->fnic_lock, flags);
- dev_kfree_skb_irq(fp_skb(fp));
- goto handle_flogi_resp_end;
+/**
+ * fnic_set_port_id() - set the port_ID after successful FLOGI.
+ * @lport: local port.
+ * @port_id: assigned FC_ID.
+ * @fp: received frame containing the FLOGI accept or NULL.
+ *
+ * This is called from libfc when a new FC_ID has been assigned.
+ * This causes us to reset the firmware to FC_MODE and setup the new MAC
+ * address and FC_ID.
+ *
+ * It is also called with FC_ID 0 when we're logged off.
+ *
+ * If the FC_ID is due to point-to-point, fp may be NULL.
+ */
+void fnic_set_port_id(struct fc_lport *lport, u32 port_id, struct fc_frame *fp)
+{
+ struct fnic *fnic = lport_priv(lport);
+ u8 *mac;
+ int ret;
+
+ FNIC_FCS_DBG(KERN_DEBUG, lport->host, "set port_id %x fp %p\n",
+ port_id, fp);
+
+ /*
+ * If we're clearing the FC_ID, change to use the ctl_src_addr.
+ * Set ethernet mode to send FLOGI.
+ */
+ if (!port_id) {
+ fnic_update_mac(lport, fnic->ctlr.ctl_src_addr);
+ fnic_set_eth_mode(fnic);
+ return;
+ }
+
+ if (fp) {
+ mac = fr_cb(fp)->granted_mac;
+ if (is_zero_ether_addr(mac)) {
+ /* non-FIP - FLOGI already accepted - ignore return */
+ fcoe_ctlr_recv_flogi(&fnic->ctlr, lport, fp);
}
+ fnic_update_mac(lport, mac);
+ }
- /* Drop older cached flogi response frame, cache this frame */
- old_flogi_resp = fnic->flogi_resp;
- fnic->flogi_resp = fp;
- fnic->flogi_oxid = FC_XID_UNKNOWN;
-
- /*
- * this frame is part of flogi get the src mac addr from this
- * frame if the src mac is fcoui based then we mark the
- * address mode flag to use fcoui base for dst mac addr
- * otherwise we have to store the fcoe gateway addr
- */
- eth_hdr = (struct ethhdr *)skb_mac_header(fp_skb(fp));
- memcpy(mac, eth_hdr->h_source, ETH_ALEN);
-
- if (ntoh24(mac) == FC_FCOE_OUI)
- fnic->fcoui_mode = 1;
- else {
- fnic->fcoui_mode = 0;
- memcpy(fnic->dest_addr, mac, ETH_ALEN);
- }
-
- /*
- * Except for Flogi frame, all outbound frames from us have the
- * Eth Src address as FC_FCOE_OUI"our_sid". Flogi frame uses
- * the vnic MAC address as the Eth Src address
- */
- fc_fcoe_set_mac(fnic->data_src_addr, fh->fh_d_id);
-
- /* We get our s_id from the d_id of the flogi resp frame */
- fnic->s_id = ntoh24(fh->fh_d_id);
-
- /* Change state to reflect transition from Eth to FC mode */
+ /* Change state to reflect transition to FC mode */
+ spin_lock_irq(&fnic->fnic_lock);
+ if (fnic->state == FNIC_IN_ETH_MODE || fnic->state == FNIC_IN_FC_MODE)
fnic->state = FNIC_IN_ETH_TRANS_FC_MODE;
-
- } else {
+ else {
FNIC_FCS_DBG(KERN_DEBUG, fnic->lport->host,
"Unexpected fnic state %s while"
" processing flogi resp\n",
fnic_state_to_str(fnic->state));
- ret = -1;
- spin_unlock_irqrestore(&fnic->fnic_lock, flags);
- dev_kfree_skb_irq(fp_skb(fp));
- goto handle_flogi_resp_end;
+ spin_unlock_irq(&fnic->fnic_lock);
+ return;
}
-
- spin_unlock_irqrestore(&fnic->fnic_lock, flags);
-
- /* Drop older cached frame */
- if (old_flogi_resp)
- dev_kfree_skb_irq(fp_skb(old_flogi_resp));
+ spin_unlock_irq(&fnic->fnic_lock);
/*
- * send flogi reg request to firmware, this will put the fnic in
- * in FC mode
+ * Send FLOGI registration to firmware to set up FC mode.
+ * The new address will be set up when registration completes.
*/
- ret = fnic_flogi_reg_handler(fnic);
+ ret = fnic_flogi_reg_handler(fnic, port_id);
if (ret < 0) {
- int free_fp = 1;
- spin_lock_irqsave(&fnic->fnic_lock, flags);
- /*
- * free the frame is some other thread is not
- * pointing to it
- */
- if (fnic->flogi_resp != fp)
- free_fp = 0;
- else
- fnic->flogi_resp = NULL;
-
+ spin_lock_irq(&fnic->fnic_lock);
if (fnic->state == FNIC_IN_ETH_TRANS_FC_MODE)
fnic->state = FNIC_IN_ETH_MODE;
- spin_unlock_irqrestore(&fnic->fnic_lock, flags);
- if (free_fp)
- dev_kfree_skb_irq(fp_skb(fp));
+ spin_unlock_irq(&fnic->fnic_lock);
}
-
- handle_flogi_resp_end:
- return ret;
-}
-
-/* Returns 1 for a response that matches cached flogi oxid */
-static inline int is_matching_flogi_resp_frame(struct fnic *fnic,
- struct fc_frame *fp)
-{
- struct fc_frame_header *fh;
- int ret = 0;
- u32 f_ctl;
-
- fh = fc_frame_header_get(fp);
- f_ctl = ntoh24(fh->fh_f_ctl);
-
- if (fnic->flogi_oxid == ntohs(fh->fh_ox_id) &&
- fh->fh_r_ctl == FC_RCTL_ELS_REP &&
- (f_ctl & (FC_FC_EX_CTX | FC_FC_SEQ_CTX)) == FC_FC_EX_CTX &&
- fh->fh_type == FC_TYPE_ELS)
- ret = 1;
-
- return ret;
}
static void fnic_rq_cmpl_frame_recv(struct vnic_rq *rq, struct cq_desc
@@ -326,6 +311,7 @@
pci_unmap_single(fnic->pdev, buf->dma_addr, buf->len,
PCI_DMA_FROMDEVICE);
skb = buf->os_buf;
+ fp = (struct fc_frame *)skb;
buf->os_buf = NULL;
cq_desc_dec(cq_desc, &type, &color, &q_number, &completed_index);
@@ -338,6 +324,9 @@
&fcoe_enc_error, &fcs_ok, &vlan_stripped,
&vlan);
eth_hdrs_stripped = 1;
+ skb_trim(skb, fcp_bytes_written);
+ fr_sof(fp) = sof;
+ fr_eof(fp) = eof;
} else if (type == CQ_DESC_TYPE_RQ_ENET) {
cq_enet_rq_desc_dec((struct cq_enet_rq_desc *)cq_desc,
@@ -352,6 +341,14 @@
&ipv4_csum_ok, &ipv6, &ipv4,
&ipv4_fragment, &fcs_ok);
eth_hdrs_stripped = 0;
+ skb_trim(skb, bytes_written);
+ if (!fcs_ok) {
+ FNIC_FCS_DBG(KERN_DEBUG, fnic->lport->host,
+ "fcs error. dropping packet.\n");
+ goto drop;
+ }
+ if (fnic_import_rq_eth_pkt(fnic, skb))
+ return;
} else {
/* wrong CQ type*/
@@ -370,43 +367,11 @@
goto drop;
}
- if (eth_hdrs_stripped)
- fnic_import_rq_fc_frame(skb, fcp_bytes_written, sof, eof);
- else if (fnic_import_rq_eth_pkt(skb, bytes_written))
- goto drop;
-
- fp = (struct fc_frame *)skb;
-
- /*
- * If frame is an ELS response that matches the cached FLOGI OX_ID,
- * and is accept, issue flogi_reg_request copy wq request to firmware
- * to register the S_ID and determine whether FC_OUI mode or GW mode.
- */
- if (is_matching_flogi_resp_frame(fnic, fp)) {
- if (!eth_hdrs_stripped) {
- if (fc_frame_payload_op(fp) == ELS_LS_ACC) {
- fnic_handle_flogi_resp(fnic, fp);
- return;
- }
- /*
- * Recd. Flogi reject. No point registering
- * with fw, but forward to libFC
- */
- goto forward;
- }
- goto drop;
- }
- if (!eth_hdrs_stripped)
- goto drop;
-
-forward:
spin_lock_irqsave(&fnic->fnic_lock, flags);
if (fnic->stop_rx_link_events) {
spin_unlock_irqrestore(&fnic->fnic_lock, flags);
goto drop;
}
- /* Use fr_flags to indicate whether succ. flogi resp or not */
- fr_flags(fp) = 0;
fr_dev(fp) = fnic->lport;
spin_unlock_irqrestore(&fnic->fnic_lock, flags);
@@ -494,12 +459,49 @@
buf->os_buf = NULL;
}
-static inline int is_flogi_frame(struct fc_frame_header *fh)
+/**
+ * fnic_eth_send() - Send Ethernet frame.
+ * @fip: fcoe_ctlr instance.
+ * @skb: Ethernet Frame, FIP, without VLAN encapsulation.
+ */
+void fnic_eth_send(struct fcoe_ctlr *fip, struct sk_buff *skb)
{
- return fh->fh_r_ctl == FC_RCTL_ELS_REQ && *(u8 *)(fh + 1) == ELS_FLOGI;
+ struct fnic *fnic = fnic_from_ctlr(fip);
+ struct vnic_wq *wq = &fnic->wq[0];
+ dma_addr_t pa;
+ struct ethhdr *eth_hdr;
+ struct vlan_ethhdr *vlan_hdr;
+ unsigned long flags;
+
+ if (!fnic->vlan_hw_insert) {
+ eth_hdr = (struct ethhdr *)skb_mac_header(skb);
+ vlan_hdr = (struct vlan_ethhdr *)skb_push(skb,
+ sizeof(*vlan_hdr) - sizeof(*eth_hdr));
+ memcpy(vlan_hdr, eth_hdr, 2 * ETH_ALEN);
+ vlan_hdr->h_vlan_proto = htons(ETH_P_8021Q);
+ vlan_hdr->h_vlan_encapsulated_proto = eth_hdr->h_proto;
+ vlan_hdr->h_vlan_TCI = htons(fnic->vlan_id);
+ }
+
+ pa = pci_map_single(fnic->pdev, skb->data, skb->len, PCI_DMA_TODEVICE);
+
+ spin_lock_irqsave(&fnic->wq_lock[0], flags);
+ if (!vnic_wq_desc_avail(wq)) {
+ pci_unmap_single(fnic->pdev, pa, skb->len, PCI_DMA_TODEVICE);
+ spin_unlock_irqrestore(&fnic->wq_lock[0], flags);
+ kfree_skb(skb);
+ return;
+ }
+
+ fnic_queue_wq_eth_desc(wq, skb, pa, skb->len,
+ fnic->vlan_hw_insert, fnic->vlan_id, 1);
+ spin_unlock_irqrestore(&fnic->wq_lock[0], flags);
}
-int fnic_send_frame(struct fnic *fnic, struct fc_frame *fp)
+/*
+ * Send FC frame.
+ */
+static int fnic_send_frame(struct fnic *fnic, struct fc_frame *fp)
{
struct vnic_wq *wq = &fnic->wq[0];
struct sk_buff *skb;
@@ -515,6 +517,10 @@
fh = fc_frame_header_get(fp);
skb = fp_skb(fp);
+ if (unlikely(fh->fh_r_ctl == FC_RCTL_ELS_REQ) &&
+ fcoe_ctlr_els_send(&fnic->ctlr, fnic->lport, skb))
+ return 0;
+
if (!fnic->vlan_hw_insert) {
eth_hdr_len = sizeof(*vlan_hdr) + sizeof(*fcoe_hdr);
vlan_hdr = (struct vlan_ethhdr *)skb_push(skb, eth_hdr_len);
@@ -530,16 +536,11 @@
fcoe_hdr = (struct fcoe_hdr *)(eth_hdr + 1);
}
- if (is_flogi_frame(fh)) {
+ if (fnic->ctlr.map_dest)
fc_fcoe_set_mac(eth_hdr->h_dest, fh->fh_d_id);
- memcpy(eth_hdr->h_source, fnic->mac_addr, ETH_ALEN);
- } else {
- if (fnic->fcoui_mode)
- fc_fcoe_set_mac(eth_hdr->h_dest, fh->fh_d_id);
- else
- memcpy(eth_hdr->h_dest, fnic->dest_addr, ETH_ALEN);
- memcpy(eth_hdr->h_source, fnic->data_src_addr, ETH_ALEN);
- }
+ else
+ memcpy(eth_hdr->h_dest, fnic->ctlr.dest_addr, ETH_ALEN);
+ memcpy(eth_hdr->h_source, fnic->data_src_addr, ETH_ALEN);
tot_len = skb->len;
BUG_ON(tot_len % 4);
@@ -578,109 +579,85 @@
int fnic_send(struct fc_lport *lp, struct fc_frame *fp)
{
struct fnic *fnic = lport_priv(lp);
- struct fc_frame_header *fh;
- int ret = 0;
- enum fnic_state old_state;
unsigned long flags;
- struct fc_frame *old_flogi = NULL;
- struct fc_frame *old_flogi_resp = NULL;
if (fnic->in_remove) {
dev_kfree_skb(fp_skb(fp));
- ret = -1;
- goto fnic_send_end;
+ return -1;
}
- fh = fc_frame_header_get(fp);
- /* if not an Flogi frame, send it out, this is the common case */
- if (!is_flogi_frame(fh))
- return fnic_send_frame(fnic, fp);
+ /*
+ * Queue frame if in a transitional state.
+ * This occurs while registering the Port_ID / MAC address after FLOGI.
+ */
+ spin_lock_irqsave(&fnic->fnic_lock, flags);
+ if (fnic->state != FNIC_IN_FC_MODE && fnic->state != FNIC_IN_ETH_MODE) {
+ skb_queue_tail(&fnic->tx_queue, fp_skb(fp));
+ spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+ return 0;
+ }
+ spin_unlock_irqrestore(&fnic->fnic_lock, flags);
- /* Flogi frame, now enter the state machine */
+ return fnic_send_frame(fnic, fp);
+}
+
+/**
+ * fnic_flush_tx() - send queued frames.
+ * @fnic: fnic device
+ *
+ * Send frames that were waiting to go out in FC or Ethernet mode.
+ * Whenever changing modes we purge queued frames, so these frames should
+ * be queued for the stable mode that we're in, either FC or Ethernet.
+ *
+ * Called without fnic_lock held.
+ */
+void fnic_flush_tx(struct fnic *fnic)
+{
+ struct sk_buff *skb;
+ struct fc_frame *fp;
+
+ while ((skb = skb_dequeue(&fnic->frame_queue))) {
+ fp = (struct fc_frame *)skb;
+ fnic_send_frame(fnic, fp);
+ }
+}
+
+/**
+ * fnic_set_eth_mode() - put fnic into ethernet mode.
+ * @fnic: fnic device
+ *
+ * Called without fnic lock held.
+ */
+static void fnic_set_eth_mode(struct fnic *fnic)
+{
+ unsigned long flags;
+ enum fnic_state old_state;
+ int ret;
spin_lock_irqsave(&fnic->fnic_lock, flags);
again:
- /* Get any old cached frames, free them after dropping lock */
- old_flogi = fnic->flogi;
- fnic->flogi = NULL;
- old_flogi_resp = fnic->flogi_resp;
- fnic->flogi_resp = NULL;
-
- fnic->flogi_oxid = FC_XID_UNKNOWN;
-
old_state = fnic->state;
switch (old_state) {
case FNIC_IN_FC_MODE:
case FNIC_IN_ETH_TRANS_FC_MODE:
default:
fnic->state = FNIC_IN_FC_TRANS_ETH_MODE;
- vnic_dev_del_addr(fnic->vdev, fnic->data_src_addr);
spin_unlock_irqrestore(&fnic->fnic_lock, flags);
- if (old_flogi) {
- dev_kfree_skb(fp_skb(old_flogi));
- old_flogi = NULL;
- }
- if (old_flogi_resp) {
- dev_kfree_skb(fp_skb(old_flogi_resp));
- old_flogi_resp = NULL;
- }
-
ret = fnic_fw_reset_handler(fnic);
spin_lock_irqsave(&fnic->fnic_lock, flags);
if (fnic->state != FNIC_IN_FC_TRANS_ETH_MODE)
goto again;
- if (ret) {
+ if (ret)
fnic->state = old_state;
- spin_unlock_irqrestore(&fnic->fnic_lock, flags);
- dev_kfree_skb(fp_skb(fp));
- goto fnic_send_end;
- }
- old_flogi = fnic->flogi;
- fnic->flogi = fp;
- fnic->flogi_oxid = ntohs(fh->fh_ox_id);
- old_flogi_resp = fnic->flogi_resp;
- fnic->flogi_resp = NULL;
- spin_unlock_irqrestore(&fnic->fnic_lock, flags);
break;
case FNIC_IN_FC_TRANS_ETH_MODE:
- /*
- * A reset is pending with the firmware. Store the flogi
- * and its oxid. The transition out of this state happens
- * only when Firmware completes the reset, either with
- * success or failed. If success, transition to
- * FNIC_IN_ETH_MODE, if fail, then transition to
- * FNIC_IN_FC_MODE
- */
- fnic->flogi = fp;
- fnic->flogi_oxid = ntohs(fh->fh_ox_id);
- spin_unlock_irqrestore(&fnic->fnic_lock, flags);
- break;
-
case FNIC_IN_ETH_MODE:
- /*
- * The fw/hw is already in eth mode. Store the oxid,
- * and send the flogi frame out. The transition out of this
- * state happens only we receive flogi response from the
- * network, and the oxid matches the cached oxid when the
- * flogi frame was sent out. If they match, then we issue
- * a flogi_reg request and transition to state
- * FNIC_IN_ETH_TRANS_FC_MODE
- */
- fnic->flogi_oxid = ntohs(fh->fh_ox_id);
- spin_unlock_irqrestore(&fnic->fnic_lock, flags);
- ret = fnic_send_frame(fnic, fp);
break;
}
-
-fnic_send_end:
- if (old_flogi)
- dev_kfree_skb(fp_skb(old_flogi));
- if (old_flogi_resp)
- dev_kfree_skb(fp_skb(old_flogi_resp));
- return ret;
+ spin_unlock_irqrestore(&fnic->fnic_lock, flags);
}
static void fnic_wq_complete_frame_send(struct vnic_wq *wq,
diff --git a/drivers/scsi/fnic/fnic_isr.c b/drivers/scsi/fnic/fnic_isr.c
index 2b30648..5c1f223 100644
--- a/drivers/scsi/fnic/fnic_isr.c
+++ b/drivers/scsi/fnic/fnic_isr.c
@@ -48,9 +48,9 @@
}
if (pba & (1 << FNIC_INTX_WQ_RQ_COPYWQ)) {
- work_done += fnic_wq_copy_cmpl_handler(fnic, 8);
- work_done += fnic_wq_cmpl_handler(fnic, 4);
- work_done += fnic_rq_cmpl_handler(fnic, 4);
+ work_done += fnic_wq_copy_cmpl_handler(fnic, -1);
+ work_done += fnic_wq_cmpl_handler(fnic, -1);
+ work_done += fnic_rq_cmpl_handler(fnic, -1);
vnic_intr_return_credits(&fnic->intr[FNIC_INTX_WQ_RQ_COPYWQ],
work_done,
@@ -66,9 +66,9 @@
struct fnic *fnic = data;
unsigned long work_done = 0;
- work_done += fnic_wq_copy_cmpl_handler(fnic, 8);
- work_done += fnic_wq_cmpl_handler(fnic, 4);
- work_done += fnic_rq_cmpl_handler(fnic, 4);
+ work_done += fnic_wq_copy_cmpl_handler(fnic, -1);
+ work_done += fnic_wq_cmpl_handler(fnic, -1);
+ work_done += fnic_rq_cmpl_handler(fnic, -1);
vnic_intr_return_credits(&fnic->intr[0],
work_done,
@@ -83,7 +83,7 @@
struct fnic *fnic = data;
unsigned long rq_work_done = 0;
- rq_work_done = fnic_rq_cmpl_handler(fnic, 4);
+ rq_work_done = fnic_rq_cmpl_handler(fnic, -1);
vnic_intr_return_credits(&fnic->intr[FNIC_MSIX_RQ],
rq_work_done,
1 /* unmask intr */,
@@ -97,7 +97,7 @@
struct fnic *fnic = data;
unsigned long wq_work_done = 0;
- wq_work_done = fnic_wq_cmpl_handler(fnic, 4);
+ wq_work_done = fnic_wq_cmpl_handler(fnic, -1);
vnic_intr_return_credits(&fnic->intr[FNIC_MSIX_WQ],
wq_work_done,
1 /* unmask intr */,
@@ -110,7 +110,7 @@
struct fnic *fnic = data;
unsigned long wq_copy_work_done = 0;
- wq_copy_work_done = fnic_wq_copy_cmpl_handler(fnic, 8);
+ wq_copy_work_done = fnic_wq_copy_cmpl_handler(fnic, -1);
vnic_intr_return_credits(&fnic->intr[FNIC_MSIX_WQ_COPY],
wq_copy_work_done,
1 /* unmask intr */,
diff --git a/drivers/scsi/fnic/fnic_main.c b/drivers/scsi/fnic/fnic_main.c
index 71c7bbe..fe1b1031 100644
--- a/drivers/scsi/fnic/fnic_main.c
+++ b/drivers/scsi/fnic/fnic_main.c
@@ -25,6 +25,8 @@
#include <linux/interrupt.h>
#include <linux/spinlock.h>
#include <linux/workqueue.h>
+#include <linux/if_ether.h>
+#include <scsi/fc/fc_fip.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_transport.h>
#include <scsi/scsi_transport_fc.h>
@@ -68,6 +70,7 @@
static struct libfc_function_template fnic_transport_template = {
.frame_send = fnic_send,
+ .lport_set_port_id = fnic_set_port_id,
.fcp_abort_io = fnic_empty_scsi_cleanup,
.fcp_cleanup = fnic_empty_scsi_cleanup,
.exch_mgr_reset = fnic_exch_mgr_reset
@@ -140,6 +143,7 @@
.get_fc_host_stats = fnic_get_stats,
.dd_fcrport_size = sizeof(struct fc_rport_libfc_priv),
.terminate_rport_io = fnic_terminate_rport_io,
+ .bsg_request = fc_lport_bsg_request,
};
static void fnic_get_host_speed(struct Scsi_Host *shost)
@@ -324,9 +328,6 @@
{
unsigned int i;
int err;
- unsigned long flags;
- struct fc_frame *flogi = NULL;
- struct fc_frame *flogi_resp = NULL;
vnic_dev_disable(fnic->vdev);
for (i = 0; i < fnic->intr_count; i++)
@@ -367,24 +368,6 @@
for (i = 0; i < fnic->intr_count; i++)
vnic_intr_clean(&fnic->intr[i]);
- /*
- * Remove cached flogi and flogi resp frames if any
- * These frames are not in any queue, and therefore queue
- * cleanup does not clean them. So clean them explicitly
- */
- spin_lock_irqsave(&fnic->fnic_lock, flags);
- flogi = fnic->flogi;
- fnic->flogi = NULL;
- flogi_resp = fnic->flogi_resp;
- fnic->flogi_resp = NULL;
- spin_unlock_irqrestore(&fnic->fnic_lock, flags);
-
- if (flogi)
- dev_kfree_skb(fp_skb(flogi));
-
- if (flogi_resp)
- dev_kfree_skb(fp_skb(flogi_resp));
-
mempool_destroy(fnic->io_req_pool);
for (i = 0; i < FNIC_SGL_NUM_CACHES; i++)
mempool_destroy(fnic->io_sgl_pool[i]);
@@ -409,6 +392,17 @@
return kmem_cache_alloc(mem, gfp_mask | GFP_ATOMIC | GFP_DMA);
}
+/**
+ * fnic_get_mac() - get assigned data MAC address for FIP code.
+ * @lport: local port.
+ */
+static u8 *fnic_get_mac(struct fc_lport *lport)
+{
+ struct fnic *fnic = lport_priv(lport);
+
+ return fnic->data_src_addr;
+}
+
static int __devinit fnic_probe(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
@@ -424,17 +418,16 @@
* Allocate SCSI Host and set up association between host,
* local port, and fnic
*/
- host = scsi_host_alloc(&fnic_host_template,
- sizeof(struct fc_lport) + sizeof(struct fnic));
- if (!host) {
- printk(KERN_ERR PFX "Unable to alloc SCSI host\n");
+ lp = libfc_host_alloc(&fnic_host_template, sizeof(struct fnic));
+ if (!lp) {
+ printk(KERN_ERR PFX "Unable to alloc libfc local port\n");
err = -ENOMEM;
goto err_out;
}
- lp = shost_priv(host);
- lp->host = host;
+ host = lp->host;
fnic = lport_priv(lp);
fnic->lport = lp;
+ fnic->ctlr.lp = lp;
snprintf(fnic->name, sizeof(fnic->name) - 1, "%s%d", DRV_NAME,
host->host_no);
@@ -543,12 +536,14 @@
goto err_out_dev_close;
}
- err = vnic_dev_mac_addr(fnic->vdev, fnic->mac_addr);
+ err = vnic_dev_mac_addr(fnic->vdev, fnic->ctlr.ctl_src_addr);
if (err) {
shost_printk(KERN_ERR, fnic->lport->host,
"vNIC get MAC addr failed \n");
goto err_out_dev_close;
}
+ /* set data_src for point-to-point mode and to keep it non-zero */
+ memcpy(fnic->data_src_addr, fnic->ctlr.ctl_src_addr, ETH_ALEN);
/* Get vNIC configuration */
err = fnic_get_vnic_config(fnic);
@@ -560,6 +555,7 @@
}
host->max_lun = fnic->config.luns_per_tgt;
host->max_id = FNIC_MAX_FCP_TARGET;
+ host->max_cmd_len = FNIC_MAX_CMD_LEN;
fnic_get_res_counts(fnic);
@@ -571,19 +567,12 @@
goto err_out_dev_close;
}
- err = fnic_request_intr(fnic);
- if (err) {
- shost_printk(KERN_ERR, fnic->lport->host,
- "Unable to request irq.\n");
- goto err_out_clear_intr;
- }
-
err = fnic_alloc_vnic_resources(fnic);
if (err) {
shost_printk(KERN_ERR, fnic->lport->host,
"Failed to alloc vNIC resources, "
"aborting.\n");
- goto err_out_free_intr;
+ goto err_out_clear_intr;
}
@@ -623,9 +612,21 @@
fnic->vlan_hw_insert = 1;
fnic->vlan_id = 0;
- fnic->flogi_oxid = FC_XID_UNKNOWN;
- fnic->flogi = NULL;
- fnic->flogi_resp = NULL;
+ /* Initialize the FIP fcoe_ctrl struct */
+ fnic->ctlr.send = fnic_eth_send;
+ fnic->ctlr.update_mac = fnic_update_mac;
+ fnic->ctlr.get_src_addr = fnic_get_mac;
+ fcoe_ctlr_init(&fnic->ctlr);
+ if (fnic->config.flags & VFCF_FIP_CAPABLE) {
+ shost_printk(KERN_INFO, fnic->lport->host,
+ "firmware supports FIP\n");
+ vnic_dev_add_addr(fnic->vdev, FIP_ALL_ENODE_MACS);
+ vnic_dev_add_addr(fnic->vdev, fnic->ctlr.ctl_src_addr);
+ } else {
+ shost_printk(KERN_INFO, fnic->lport->host,
+ "firmware uses non-FIP mode\n");
+ fnic->ctlr.mode = FIP_ST_NON_FIP;
+ }
fnic->state = FNIC_IN_FC_MODE;
/* Enable hardware stripping of vlan header on ingress */
@@ -716,6 +717,7 @@
INIT_WORK(&fnic->link_work, fnic_handle_link);
INIT_WORK(&fnic->frame_work, fnic_handle_frame);
skb_queue_head_init(&fnic->frame_queue);
+ skb_queue_head_init(&fnic->tx_queue);
/* Enable all queues */
for (i = 0; i < fnic->raw_wq_count; i++)
@@ -728,6 +730,14 @@
fc_fabric_login(lp);
vnic_dev_enable(fnic->vdev);
+
+ err = fnic_request_intr(fnic);
+ if (err) {
+ shost_printk(KERN_ERR, fnic->lport->host,
+ "Unable to request irq.\n");
+ goto err_out_free_exch_mgr;
+ }
+
for (i = 0; i < fnic->intr_count; i++)
vnic_intr_unmask(&fnic->intr[i]);
@@ -738,8 +748,8 @@
err_out_free_exch_mgr:
fc_exch_mgr_free(lp);
err_out_remove_scsi_host:
- fc_remove_host(fnic->lport->host);
- scsi_remove_host(fnic->lport->host);
+ fc_remove_host(lp->host);
+ scsi_remove_host(lp->host);
err_out_free_rq_buf:
for (i = 0; i < fnic->rq_count; i++)
vnic_rq_clean(&fnic->rq[i], fnic_free_rq_buf);
@@ -752,8 +762,6 @@
mempool_destroy(fnic->io_req_pool);
err_out_free_resources:
fnic_free_vnic_resources(fnic);
-err_out_free_intr:
- fnic_free_intr(fnic);
err_out_clear_intr:
fnic_clear_intr_mode(fnic);
err_out_dev_close:
@@ -775,6 +783,7 @@
static void __devexit fnic_remove(struct pci_dev *pdev)
{
struct fnic *fnic = pci_get_drvdata(pdev);
+ struct fc_lport *lp = fnic->lport;
unsigned long flags;
/*
@@ -796,6 +805,7 @@
*/
flush_workqueue(fnic_event_queue);
skb_queue_purge(&fnic->frame_queue);
+ skb_queue_purge(&fnic->tx_queue);
/*
* Log off the fabric. This stops all remote ports, dns port,
@@ -808,7 +818,8 @@
fnic->in_remove = 1;
spin_unlock_irqrestore(&fnic->fnic_lock, flags);
- fc_lport_destroy(fnic->lport);
+ fcoe_ctlr_destroy(&fnic->ctlr);
+ fc_lport_destroy(lp);
/*
* This stops the fnic device, masks all interrupts. Completed
@@ -818,6 +829,7 @@
fnic_cleanup(fnic);
BUG_ON(!skb_queue_empty(&fnic->frame_queue));
+ BUG_ON(!skb_queue_empty(&fnic->tx_queue));
spin_lock_irqsave(&fnic_list_lock, flags);
list_del(&fnic->list);
@@ -827,8 +839,8 @@
scsi_remove_host(fnic->lport->host);
fc_exch_mgr_free(fnic->lport);
vnic_dev_notify_unset(fnic->vdev);
- fnic_free_vnic_resources(fnic);
fnic_free_intr(fnic);
+ fnic_free_vnic_resources(fnic);
fnic_clear_intr_mode(fnic);
vnic_dev_close(fnic->vdev);
vnic_dev_unregister(fnic->vdev);
@@ -836,7 +848,7 @@
pci_release_regions(pdev);
pci_disable_device(pdev);
pci_set_drvdata(pdev, NULL);
- scsi_host_put(fnic->lport->host);
+ scsi_host_put(lp->host);
}
static struct pci_driver fnic_driver = {
diff --git a/drivers/scsi/fnic/fnic_res.c b/drivers/scsi/fnic/fnic_res.c
index 7ba61ec..50488f8 100644
--- a/drivers/scsi/fnic/fnic_res.c
+++ b/drivers/scsi/fnic/fnic_res.c
@@ -144,10 +144,9 @@
c->intr_timer_type = c->intr_timer_type;
shost_printk(KERN_INFO, fnic->lport->host,
- "vNIC MAC addr %02x:%02x:%02x:%02x:%02x:%02x "
+ "vNIC MAC addr %pM "
"wq/wq_copy/rq %d/%d/%d\n",
- fnic->mac_addr[0], fnic->mac_addr[1], fnic->mac_addr[2],
- fnic->mac_addr[3], fnic->mac_addr[4], fnic->mac_addr[5],
+ fnic->ctlr.ctl_src_addr,
c->wq_enet_desc_count, c->wq_copy_desc_count,
c->rq_desc_count);
shost_printk(KERN_INFO, fnic->lport->host,
diff --git a/drivers/scsi/fnic/fnic_res.h b/drivers/scsi/fnic/fnic_res.h
index b6f3102..ef8aaf2 100644
--- a/drivers/scsi/fnic/fnic_res.h
+++ b/drivers/scsi/fnic/fnic_res.h
@@ -51,6 +51,31 @@
vnic_wq_post(wq, os_buf, dma_addr, len, sop, eop);
}
+static inline void fnic_queue_wq_eth_desc(struct vnic_wq *wq,
+ void *os_buf, dma_addr_t dma_addr,
+ unsigned int len,
+ int vlan_tag_insert,
+ unsigned int vlan_tag,
+ int cq_entry)
+{
+ struct wq_enet_desc *desc = vnic_wq_next_desc(wq);
+
+ wq_enet_desc_enc(desc,
+ (u64)dma_addr | VNIC_PADDR_TARGET,
+ (u16)len,
+ 0, /* mss_or_csum_offset */
+ 0, /* fc_eof */
+ 0, /* offload_mode */
+ 1, /* eop */
+ (u8)cq_entry,
+ 0, /* fcoe_encap */
+ (u8)vlan_tag_insert,
+ (u16)vlan_tag,
+ 0 /* loopback */);
+
+ vnic_wq_post(wq, os_buf, dma_addr, len, 1, 1);
+}
+
static inline void fnic_queue_wq_copy_desc_icmnd_16(struct vnic_wq_copy *wq,
u32 req_id,
u32 lunmap_id, u8 spl_flags,
@@ -58,6 +83,7 @@
u64 sgl_addr, u64 sns_addr,
u8 crn, u8 pri_ta,
u8 flags, u8 *scsi_cdb,
+ u8 cdb_len,
u32 data_len, u8 *lun,
u32 d_id, u16 mss,
u32 ratov, u32 edtov)
@@ -82,7 +108,8 @@
desc->u.icmnd_16.pri_ta = pri_ta; /* SCSI Pri & Task attribute */
desc->u.icmnd_16._resvd1 = 0; /* reserved: should be 0 */
desc->u.icmnd_16.flags = flags; /* command flags */
- memcpy(desc->u.icmnd_16.scsi_cdb, scsi_cdb, CDB_16); /* SCSI CDB */
+ memset(desc->u.icmnd_16.scsi_cdb, 0, CDB_16);
+ memcpy(desc->u.icmnd_16.scsi_cdb, scsi_cdb, cdb_len); /* SCSI CDB */
desc->u.icmnd_16.data_len = data_len; /* length of data expected */
memcpy(desc->u.icmnd_16.lun, lun, LUN_ADDRESS); /* LUN address */
desc->u.icmnd_16._resvd2 = 0; /* reserved */
@@ -132,12 +159,37 @@
desc->hdr.tag.u.req_id = req_id; /* id for this request */
desc->u.flogi_reg.format = format;
+ desc->u.flogi_reg._resvd = 0;
hton24(desc->u.flogi_reg.s_id, s_id);
memcpy(desc->u.flogi_reg.gateway_mac, gw_mac, ETH_ALEN);
vnic_wq_copy_post(wq);
}
+static inline void fnic_queue_wq_copy_desc_fip_reg(struct vnic_wq_copy *wq,
+ u32 req_id, u32 s_id,
+ u8 *fcf_mac, u8 *ha_mac,
+ u32 r_a_tov, u32 e_d_tov)
+{
+ struct fcpio_host_req *desc = vnic_wq_copy_next_desc(wq);
+
+ desc->hdr.type = FCPIO_FLOGI_FIP_REG; /* enum fcpio_type */
+ desc->hdr.status = 0; /* header status entry */
+ desc->hdr._resvd = 0; /* reserved */
+ desc->hdr.tag.u.req_id = req_id; /* id for this request */
+
+ desc->u.flogi_fip_reg._resvd0 = 0;
+ hton24(desc->u.flogi_fip_reg.s_id, s_id);
+ memcpy(desc->u.flogi_fip_reg.fcf_mac, fcf_mac, ETH_ALEN);
+ desc->u.flogi_fip_reg._resvd1 = 0;
+ desc->u.flogi_fip_reg.r_a_tov = r_a_tov;
+ desc->u.flogi_fip_reg.e_d_tov = e_d_tov;
+ memcpy(desc->u.flogi_fip_reg.ha_mac, ha_mac, ETH_ALEN);
+ desc->u.flogi_fip_reg._resvd2 = 0;
+
+ vnic_wq_copy_post(wq);
+}
+
static inline void fnic_queue_wq_copy_desc_fw_reset(struct vnic_wq_copy *wq,
u32 req_id)
{
diff --git a/drivers/scsi/fnic/fnic_scsi.c b/drivers/scsi/fnic/fnic_scsi.c
index bfc9969..65a39b0 100644
--- a/drivers/scsi/fnic/fnic_scsi.c
+++ b/drivers/scsi/fnic/fnic_scsi.c
@@ -174,6 +174,9 @@
int ret = 0;
unsigned long flags;
+ skb_queue_purge(&fnic->frame_queue);
+ skb_queue_purge(&fnic->tx_queue);
+
spin_lock_irqsave(&fnic->wq_copy_lock[0], flags);
if (vnic_wq_copy_desc_avail(wq) <= fnic->wq_copy_desc_low[0])
@@ -200,9 +203,11 @@
* fnic_flogi_reg_handler
* Routine to send flogi register msg to fw
*/
-int fnic_flogi_reg_handler(struct fnic *fnic)
+int fnic_flogi_reg_handler(struct fnic *fnic, u32 fc_id)
{
struct vnic_wq_copy *wq = &fnic->wq_copy[0];
+ enum fcpio_flogi_reg_format_type format;
+ struct fc_lport *lp = fnic->lport;
u8 gw_mac[ETH_ALEN];
int ret = 0;
unsigned long flags;
@@ -217,23 +222,32 @@
goto flogi_reg_ioreq_end;
}
- if (fnic->fcoui_mode)
+ if (fnic->ctlr.map_dest) {
memset(gw_mac, 0xff, ETH_ALEN);
- else
- memcpy(gw_mac, fnic->dest_addr, ETH_ALEN);
+ format = FCPIO_FLOGI_REG_DEF_DEST;
+ } else {
+ memcpy(gw_mac, fnic->ctlr.dest_addr, ETH_ALEN);
+ format = FCPIO_FLOGI_REG_GW_DEST;
+ }
- fnic_queue_wq_copy_desc_flogi_reg(wq, SCSI_NO_TAG,
- FCPIO_FLOGI_REG_GW_DEST,
- fnic->s_id,
- gw_mac);
+ if ((fnic->config.flags & VFCF_FIP_CAPABLE) && !fnic->ctlr.map_dest) {
+ fnic_queue_wq_copy_desc_fip_reg(wq, SCSI_NO_TAG,
+ fc_id, gw_mac,
+ fnic->data_src_addr,
+ lp->r_a_tov, lp->e_d_tov);
+ FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
+ "FLOGI FIP reg issued fcid %x src %pM dest %pM\n",
+ fc_id, fnic->data_src_addr, gw_mac);
+ } else {
+ fnic_queue_wq_copy_desc_flogi_reg(wq, SCSI_NO_TAG,
+ format, fc_id, gw_mac);
+ FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
+ "FLOGI reg issued fcid %x map %d dest %pM\n",
+ fc_id, fnic->ctlr.map_dest, gw_mac);
+ }
flogi_reg_ioreq_end:
spin_unlock_irqrestore(&fnic->wq_copy_lock[0], flags);
-
- if (!ret)
- FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
- "flog reg issued\n");
-
return ret;
}
@@ -319,7 +333,8 @@
0, /* scsi cmd ref, always 0 */
pri_tag, /* scsi pri and tag */
flags, /* command flags */
- sc->cmnd, scsi_bufflen(sc),
+ sc->cmnd, sc->cmd_len,
+ scsi_bufflen(sc),
fc_lun.scsi_lun, io_req->port_id,
rport->maxframe_size, rp->r_a_tov,
rp->e_d_tov);
@@ -452,7 +467,6 @@
u8 hdr_status;
struct fcpio_tag tag;
int ret = 0;
- struct fc_frame *flogi;
unsigned long flags;
fcpio_header_dec(&desc->hdr, &type, &hdr_status, &tag);
@@ -462,9 +476,6 @@
spin_lock_irqsave(&fnic->fnic_lock, flags);
- flogi = fnic->flogi;
- fnic->flogi = NULL;
-
/* fnic should be in FC_TRANS_ETH_MODE */
if (fnic->state == FNIC_IN_FC_TRANS_ETH_MODE) {
/* Check status of reset completion */
@@ -505,17 +516,14 @@
* free the flogi frame. Else, send it out
*/
if (fnic->remove_wait || ret) {
- fnic->flogi_oxid = FC_XID_UNKNOWN;
spin_unlock_irqrestore(&fnic->fnic_lock, flags);
- if (flogi)
- dev_kfree_skb_irq(fp_skb(flogi));
+ skb_queue_purge(&fnic->tx_queue);
goto reset_cmpl_handler_end;
}
spin_unlock_irqrestore(&fnic->fnic_lock, flags);
- if (flogi)
- ret = fnic_send_frame(fnic, flogi);
+ fnic_flush_tx(fnic);
reset_cmpl_handler_end:
return ret;
@@ -532,18 +540,13 @@
u8 hdr_status;
struct fcpio_tag tag;
int ret = 0;
- struct fc_frame *flogi_resp = NULL;
unsigned long flags;
- struct sk_buff *skb;
fcpio_header_dec(&desc->hdr, &type, &hdr_status, &tag);
/* Update fnic state based on status of flogi reg completion */
spin_lock_irqsave(&fnic->fnic_lock, flags);
- flogi_resp = fnic->flogi_resp;
- fnic->flogi_resp = NULL;
-
if (fnic->state == FNIC_IN_ETH_TRANS_FC_MODE) {
/* Check flogi registration completion status */
@@ -567,25 +570,17 @@
ret = -1;
}
- /* Successful flogi reg cmpl, pass frame to LibFC */
- if (!ret && flogi_resp) {
+ if (!ret) {
if (fnic->stop_rx_link_events) {
spin_unlock_irqrestore(&fnic->fnic_lock, flags);
goto reg_cmpl_handler_end;
}
- skb = (struct sk_buff *)flogi_resp;
- /* Use fr_flags to indicate whether flogi resp or not */
- fr_flags(flogi_resp) = 1;
- fr_dev(flogi_resp) = fnic->lport;
spin_unlock_irqrestore(&fnic->fnic_lock, flags);
- skb_queue_tail(&fnic->frame_queue, skb);
+ fnic_flush_tx(fnic);
queue_work(fnic_event_queue, &fnic->frame_work);
-
} else {
spin_unlock_irqrestore(&fnic->fnic_lock, flags);
- if (flogi_resp)
- dev_kfree_skb_irq(fp_skb(flogi_resp));
}
reg_cmpl_handler_end:
@@ -907,6 +902,7 @@
break;
case FCPIO_FLOGI_REG_CMPL: /* fw completed flogi_reg */
+ case FCPIO_FLOGI_FIP_REG_CMPL: /* fw completed flogi_fip_reg */
ret = fnic_fcpio_flogi_reg_cmpl_handler(fnic, desc);
break;
@@ -1224,22 +1220,6 @@
}
-static void fnic_block_error_handler(struct scsi_cmnd *sc)
-{
- struct Scsi_Host *shost = sc->device->host;
- struct fc_rport *rport = starget_to_rport(scsi_target(sc->device));
- unsigned long flags;
-
- spin_lock_irqsave(shost->host_lock, flags);
- while (rport->port_state == FC_PORTSTATE_BLOCKED) {
- spin_unlock_irqrestore(shost->host_lock, flags);
- msleep(1000);
- spin_lock_irqsave(shost->host_lock, flags);
- }
- spin_unlock_irqrestore(shost->host_lock, flags);
-
-}
-
/*
* This function is exported to SCSI for sending abort cmnds.
* A SCSI IO is represented by a io_req in the driver.
@@ -1259,7 +1239,7 @@
DECLARE_COMPLETION_ONSTACK(tm_done);
/* Wait for rport to unblock */
- fnic_block_error_handler(sc);
+ fc_block_scsi_eh(sc);
/* Get local-port, check ready and link up */
lp = shost_priv(sc->device->host);
@@ -1541,7 +1521,7 @@
DECLARE_COMPLETION_ONSTACK(tm_done);
/* Wait for rport to unblock */
- fnic_block_error_handler(sc);
+ fc_block_scsi_eh(sc);
/* Get local-port, check ready and link up */
lp = shost_priv(sc->device->host);
@@ -1762,7 +1742,7 @@
fnic->remove_wait = &remove_wait;
old_state = fnic->state;
fnic->state = FNIC_IN_FC_TRANS_ETH_MODE;
- vnic_dev_del_addr(fnic->vdev, fnic->data_src_addr);
+ fnic_update_mac_locked(fnic, fnic->ctlr.ctl_src_addr);
spin_unlock_irqrestore(&fnic->fnic_lock, flags);
err = fnic_fw_reset_handler(fnic);
@@ -1802,7 +1782,7 @@
spin_lock_irqsave(&fnic->fnic_lock, flags);
old_state = fnic->state;
fnic->state = FNIC_IN_FC_TRANS_ETH_MODE;
- vnic_dev_del_addr(fnic->vdev, fnic->data_src_addr);
+ fnic_update_mac_locked(fnic, fnic->ctlr.ctl_src_addr);
spin_unlock_irqrestore(&fnic->fnic_lock, flags);
if (fnic_fw_reset_handler(fnic)) {
diff --git a/drivers/scsi/fnic/vnic_scsi.h b/drivers/scsi/fnic/vnic_scsi.h
index 46baa52..fbb5536 100644
--- a/drivers/scsi/fnic/vnic_scsi.h
+++ b/drivers/scsi/fnic/vnic_scsi.h
@@ -95,5 +95,6 @@
#define VFCF_FCP_SEQ_LVL_ERR 0x1 /* Enable FCP-2 Error Recovery */
#define VFCF_PERBI 0x2 /* persistent binding info available */
+#define VFCF_FIP_CAPABLE 0x4 /* firmware can handle FIP */
#endif /* _VNIC_SCSI_H_ */
diff --git a/drivers/scsi/hosts.c b/drivers/scsi/hosts.c
index c968cc3..554626e 100644
--- a/drivers/scsi/hosts.c
+++ b/drivers/scsi/hosts.c
@@ -180,14 +180,20 @@
EXPORT_SYMBOL(scsi_remove_host);
/**
- * scsi_add_host - add a scsi host
+ * scsi_add_host_with_dma - add a scsi host with dma device
* @shost: scsi host pointer to add
* @dev: a struct device of type scsi class
+ * @dma_dev: dma device for the host
+ *
+ * Note: You rarely need to worry about this unless you're in a
+ * virtualised host environments, so use the simpler scsi_add_host()
+ * function instead.
*
* Return value:
* 0 on success / != 0 for error
**/
-int scsi_add_host(struct Scsi_Host *shost, struct device *dev)
+int scsi_add_host_with_dma(struct Scsi_Host *shost, struct device *dev,
+ struct device *dma_dev)
{
struct scsi_host_template *sht = shost->hostt;
int error = -EINVAL;
@@ -207,6 +213,7 @@
if (!shost->shost_gendev.parent)
shost->shost_gendev.parent = dev ? dev : &platform_bus;
+ shost->dma_dev = dma_dev;
error = device_add(&shost->shost_gendev);
if (error)
@@ -262,7 +269,7 @@
fail:
return error;
}
-EXPORT_SYMBOL(scsi_add_host);
+EXPORT_SYMBOL(scsi_add_host_with_dma);
static void scsi_host_dev_release(struct device *dev)
{
diff --git a/drivers/scsi/hptiop.c b/drivers/scsi/hptiop.c
index a0e7e71..4f05565 100644
--- a/drivers/scsi/hptiop.c
+++ b/drivers/scsi/hptiop.c
@@ -834,7 +834,7 @@
atomic_read(&hba->resetting) == 0, 60 * HZ);
if (atomic_read(&hba->resetting)) {
- /* IOP is in unkown state, abort reset */
+ /* IOP is in unknown state, abort reset */
printk(KERN_ERR "scsi%d: reset failed\n", hba->host->host_no);
return -1;
}
@@ -861,10 +861,13 @@
}
static int hptiop_adjust_disk_queue_depth(struct scsi_device *sdev,
- int queue_depth)
+ int queue_depth, int reason)
{
struct hptiop_hba *hba = (struct hptiop_hba *)sdev->host->hostdata;
+ if (reason != SCSI_QDEPTH_DEFAULT)
+ return -EOPNOTSUPP;
+
if (queue_depth > hba->max_requests)
queue_depth = hba->max_requests;
scsi_adjust_queue_depth(sdev, MSG_ORDERED_TAG, queue_depth);
diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c
index bb2c696..87b536a 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.c
+++ b/drivers/scsi/ibmvscsi/ibmvfc.c
@@ -39,6 +39,7 @@
#include <scsi/scsi_device.h>
#include <scsi/scsi_tcq.h>
#include <scsi/scsi_transport_fc.h>
+#include <scsi/scsi_bsg_fc.h>
#include "ibmvfc.h"
static unsigned int init_timeout = IBMVFC_INIT_TIMEOUT;
@@ -558,12 +559,11 @@
/**
* ibmvfc_init_host - Start host initialization
* @vhost: ibmvfc host struct
- * @relogin: is this a re-login?
*
* Return value:
* nothing
**/
-static void ibmvfc_init_host(struct ibmvfc_host *vhost, int relogin)
+static void ibmvfc_init_host(struct ibmvfc_host *vhost)
{
struct ibmvfc_target *tgt;
@@ -577,10 +577,8 @@
}
if (!ibmvfc_set_host_state(vhost, IBMVFC_INITIALIZING)) {
- if (!relogin) {
- memset(vhost->async_crq.msgs, 0, PAGE_SIZE);
- vhost->async_crq.cur = 0;
- }
+ memset(vhost->async_crq.msgs, 0, PAGE_SIZE);
+ vhost->async_crq.cur = 0;
list_for_each_entry(tgt, &vhost->targets, queue)
ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_DEL_RPORT);
@@ -1678,6 +1676,276 @@
}
/**
+ * ibmvfc_bsg_timeout_done - Completion handler for cancelling BSG commands
+ * @evt: struct ibmvfc_event
+ *
+ **/
+static void ibmvfc_bsg_timeout_done(struct ibmvfc_event *evt)
+{
+ struct ibmvfc_host *vhost = evt->vhost;
+
+ ibmvfc_free_event(evt);
+ vhost->aborting_passthru = 0;
+ dev_info(vhost->dev, "Passthru command cancelled\n");
+}
+
+/**
+ * ibmvfc_bsg_timeout - Handle a BSG timeout
+ * @job: struct fc_bsg_job that timed out
+ *
+ * Returns:
+ * 0 on success / other on failure
+ **/
+static int ibmvfc_bsg_timeout(struct fc_bsg_job *job)
+{
+ struct ibmvfc_host *vhost = shost_priv(job->shost);
+ unsigned long port_id = (unsigned long)job->dd_data;
+ struct ibmvfc_event *evt;
+ struct ibmvfc_tmf *tmf;
+ unsigned long flags;
+ int rc;
+
+ ENTER;
+ spin_lock_irqsave(vhost->host->host_lock, flags);
+ if (vhost->aborting_passthru || vhost->state != IBMVFC_ACTIVE) {
+ __ibmvfc_reset_host(vhost);
+ spin_unlock_irqrestore(vhost->host->host_lock, flags);
+ return 0;
+ }
+
+ vhost->aborting_passthru = 1;
+ evt = ibmvfc_get_event(vhost);
+ ibmvfc_init_event(evt, ibmvfc_bsg_timeout_done, IBMVFC_MAD_FORMAT);
+
+ tmf = &evt->iu.tmf;
+ memset(tmf, 0, sizeof(*tmf));
+ tmf->common.version = 1;
+ tmf->common.opcode = IBMVFC_TMF_MAD;
+ tmf->common.length = sizeof(*tmf);
+ tmf->scsi_id = port_id;
+ tmf->cancel_key = IBMVFC_PASSTHRU_CANCEL_KEY;
+ tmf->my_cancel_key = IBMVFC_INTERNAL_CANCEL_KEY;
+ rc = ibmvfc_send_event(evt, vhost, default_timeout);
+
+ if (rc != 0) {
+ vhost->aborting_passthru = 0;
+ dev_err(vhost->dev, "Failed to send cancel event. rc=%d\n", rc);
+ rc = -EIO;
+ } else
+ dev_info(vhost->dev, "Cancelling passthru command to port id 0x%lx\n",
+ port_id);
+
+ spin_unlock_irqrestore(vhost->host->host_lock, flags);
+
+ LEAVE;
+ return rc;
+}
+
+/**
+ * ibmvfc_bsg_plogi - PLOGI into a target to handle a BSG command
+ * @vhost: struct ibmvfc_host to send command
+ * @port_id: port ID to send command
+ *
+ * Returns:
+ * 0 on success / other on failure
+ **/
+static int ibmvfc_bsg_plogi(struct ibmvfc_host *vhost, unsigned int port_id)
+{
+ struct ibmvfc_port_login *plogi;
+ struct ibmvfc_target *tgt;
+ struct ibmvfc_event *evt;
+ union ibmvfc_iu rsp_iu;
+ unsigned long flags;
+ int rc = 0, issue_login = 1;
+
+ ENTER;
+ spin_lock_irqsave(vhost->host->host_lock, flags);
+ list_for_each_entry(tgt, &vhost->targets, queue) {
+ if (tgt->scsi_id == port_id) {
+ issue_login = 0;
+ break;
+ }
+ }
+
+ if (!issue_login)
+ goto unlock_out;
+ if (unlikely((rc = ibmvfc_host_chkready(vhost))))
+ goto unlock_out;
+
+ evt = ibmvfc_get_event(vhost);
+ ibmvfc_init_event(evt, ibmvfc_sync_completion, IBMVFC_MAD_FORMAT);
+ plogi = &evt->iu.plogi;
+ memset(plogi, 0, sizeof(*plogi));
+ plogi->common.version = 1;
+ plogi->common.opcode = IBMVFC_PORT_LOGIN;
+ plogi->common.length = sizeof(*plogi);
+ plogi->scsi_id = port_id;
+ evt->sync_iu = &rsp_iu;
+ init_completion(&evt->comp);
+
+ rc = ibmvfc_send_event(evt, vhost, default_timeout);
+ spin_unlock_irqrestore(vhost->host->host_lock, flags);
+
+ if (rc)
+ return -EIO;
+
+ wait_for_completion(&evt->comp);
+
+ if (rsp_iu.plogi.common.status)
+ rc = -EIO;
+
+ spin_lock_irqsave(vhost->host->host_lock, flags);
+ ibmvfc_free_event(evt);
+unlock_out:
+ spin_unlock_irqrestore(vhost->host->host_lock, flags);
+ LEAVE;
+ return rc;
+}
+
+/**
+ * ibmvfc_bsg_request - Handle a BSG request
+ * @job: struct fc_bsg_job to be executed
+ *
+ * Returns:
+ * 0 on success / other on failure
+ **/
+static int ibmvfc_bsg_request(struct fc_bsg_job *job)
+{
+ struct ibmvfc_host *vhost = shost_priv(job->shost);
+ struct fc_rport *rport = job->rport;
+ struct ibmvfc_passthru_mad *mad;
+ struct ibmvfc_event *evt;
+ union ibmvfc_iu rsp_iu;
+ unsigned long flags, port_id = -1;
+ unsigned int code = job->request->msgcode;
+ int rc = 0, req_seg, rsp_seg, issue_login = 0;
+ u32 fc_flags, rsp_len;
+
+ ENTER;
+ job->reply->reply_payload_rcv_len = 0;
+ if (rport)
+ port_id = rport->port_id;
+
+ switch (code) {
+ case FC_BSG_HST_ELS_NOLOGIN:
+ port_id = (job->request->rqst_data.h_els.port_id[0] << 16) |
+ (job->request->rqst_data.h_els.port_id[1] << 8) |
+ job->request->rqst_data.h_els.port_id[2];
+ case FC_BSG_RPT_ELS:
+ fc_flags = IBMVFC_FC_ELS;
+ break;
+ case FC_BSG_HST_CT:
+ issue_login = 1;
+ port_id = (job->request->rqst_data.h_ct.port_id[0] << 16) |
+ (job->request->rqst_data.h_ct.port_id[1] << 8) |
+ job->request->rqst_data.h_ct.port_id[2];
+ case FC_BSG_RPT_CT:
+ fc_flags = IBMVFC_FC_CT_IU;
+ break;
+ default:
+ return -ENOTSUPP;
+ };
+
+ if (port_id == -1)
+ return -EINVAL;
+ if (!mutex_trylock(&vhost->passthru_mutex))
+ return -EBUSY;
+
+ job->dd_data = (void *)port_id;
+ req_seg = dma_map_sg(vhost->dev, job->request_payload.sg_list,
+ job->request_payload.sg_cnt, DMA_TO_DEVICE);
+
+ if (!req_seg) {
+ mutex_unlock(&vhost->passthru_mutex);
+ return -ENOMEM;
+ }
+
+ rsp_seg = dma_map_sg(vhost->dev, job->reply_payload.sg_list,
+ job->reply_payload.sg_cnt, DMA_FROM_DEVICE);
+
+ if (!rsp_seg) {
+ dma_unmap_sg(vhost->dev, job->request_payload.sg_list,
+ job->request_payload.sg_cnt, DMA_TO_DEVICE);
+ mutex_unlock(&vhost->passthru_mutex);
+ return -ENOMEM;
+ }
+
+ if (req_seg > 1 || rsp_seg > 1) {
+ rc = -EINVAL;
+ goto out;
+ }
+
+ if (issue_login)
+ rc = ibmvfc_bsg_plogi(vhost, port_id);
+
+ spin_lock_irqsave(vhost->host->host_lock, flags);
+
+ if (unlikely(rc || (rport && (rc = fc_remote_port_chkready(rport)))) ||
+ unlikely((rc = ibmvfc_host_chkready(vhost)))) {
+ spin_unlock_irqrestore(vhost->host->host_lock, flags);
+ goto out;
+ }
+
+ evt = ibmvfc_get_event(vhost);
+ ibmvfc_init_event(evt, ibmvfc_sync_completion, IBMVFC_MAD_FORMAT);
+ mad = &evt->iu.passthru;
+
+ memset(mad, 0, sizeof(*mad));
+ mad->common.version = 1;
+ mad->common.opcode = IBMVFC_PASSTHRU;
+ mad->common.length = sizeof(*mad) - sizeof(mad->fc_iu) - sizeof(mad->iu);
+
+ mad->cmd_ioba.va = (u64)evt->crq.ioba +
+ offsetof(struct ibmvfc_passthru_mad, iu);
+ mad->cmd_ioba.len = sizeof(mad->iu);
+
+ mad->iu.cmd_len = job->request_payload.payload_len;
+ mad->iu.rsp_len = job->reply_payload.payload_len;
+ mad->iu.flags = fc_flags;
+ mad->iu.cancel_key = IBMVFC_PASSTHRU_CANCEL_KEY;
+
+ mad->iu.cmd.va = sg_dma_address(job->request_payload.sg_list);
+ mad->iu.cmd.len = sg_dma_len(job->request_payload.sg_list);
+ mad->iu.rsp.va = sg_dma_address(job->reply_payload.sg_list);
+ mad->iu.rsp.len = sg_dma_len(job->reply_payload.sg_list);
+ mad->iu.scsi_id = port_id;
+ mad->iu.tag = (u64)evt;
+ rsp_len = mad->iu.rsp.len;
+
+ evt->sync_iu = &rsp_iu;
+ init_completion(&evt->comp);
+ rc = ibmvfc_send_event(evt, vhost, 0);
+ spin_unlock_irqrestore(vhost->host->host_lock, flags);
+
+ if (rc) {
+ rc = -EIO;
+ goto out;
+ }
+
+ wait_for_completion(&evt->comp);
+
+ if (rsp_iu.passthru.common.status)
+ rc = -EIO;
+ else
+ job->reply->reply_payload_rcv_len = rsp_len;
+
+ spin_lock_irqsave(vhost->host->host_lock, flags);
+ ibmvfc_free_event(evt);
+ spin_unlock_irqrestore(vhost->host->host_lock, flags);
+ job->reply->result = rc;
+ job->job_done(job);
+ rc = 0;
+out:
+ dma_unmap_sg(vhost->dev, job->request_payload.sg_list,
+ job->request_payload.sg_cnt, DMA_TO_DEVICE);
+ dma_unmap_sg(vhost->dev, job->reply_payload.sg_list,
+ job->reply_payload.sg_cnt, DMA_FROM_DEVICE);
+ mutex_unlock(&vhost->passthru_mutex);
+ LEAVE;
+ return rc;
+}
+
+/**
* ibmvfc_reset_device - Reset the device with the specified reset type
* @sdev: scsi device to reset
* @type: reset type
@@ -1731,7 +1999,10 @@
sdev_printk(KERN_INFO, sdev, "Resetting %s\n", desc);
wait_for_completion(&evt->comp);
- if (rsp_iu.cmd.status) {
+ if (rsp_iu.cmd.status)
+ rsp_code = ibmvfc_get_err_result(&rsp_iu.cmd);
+
+ if (rsp_code) {
if (fc_rsp->flags & FCP_RSP_LEN_VALID)
rsp_code = fc_rsp->data.info.rsp_code;
@@ -1820,7 +2091,10 @@
sdev_printk(KERN_INFO, sdev, "Aborting outstanding commands\n");
wait_for_completion(&evt->comp);
- if (rsp_iu.cmd.status) {
+ if (rsp_iu.cmd.status)
+ rsp_code = ibmvfc_get_err_result(&rsp_iu.cmd);
+
+ if (rsp_code) {
if (fc_rsp->flags & FCP_RSP_LEN_VALID)
rsp_code = fc_rsp->data.info.rsp_code;
@@ -2061,12 +2335,24 @@
}
/**
- * ibmvfc_dev_cancel_all - Device iterated cancel all function
+ * ibmvfc_dev_cancel_all_abts - Device iterated cancel all function
* @sdev: scsi device struct
* @data: return code
*
**/
-static void ibmvfc_dev_cancel_all(struct scsi_device *sdev, void *data)
+static void ibmvfc_dev_cancel_all_abts(struct scsi_device *sdev, void *data)
+{
+ unsigned long *rc = data;
+ *rc |= ibmvfc_cancel_all(sdev, IBMVFC_TMF_ABORT_TASK_SET);
+}
+
+/**
+ * ibmvfc_dev_cancel_all_reset - Device iterated cancel all function
+ * @sdev: scsi device struct
+ * @data: return code
+ *
+ **/
+static void ibmvfc_dev_cancel_all_reset(struct scsi_device *sdev, void *data)
{
unsigned long *rc = data;
*rc |= ibmvfc_cancel_all(sdev, IBMVFC_TMF_TGT_RESET);
@@ -2102,7 +2388,7 @@
ENTER;
ibmvfc_wait_while_resetting(vhost);
- starget_for_each_device(starget, &cancel_rc, ibmvfc_dev_cancel_all);
+ starget_for_each_device(starget, &cancel_rc, ibmvfc_dev_cancel_all_reset);
reset_rc = ibmvfc_reset_device(sdev, IBMVFC_TARGET_RESET, "target");
if (!cancel_rc && !reset_rc)
@@ -2144,7 +2430,7 @@
int rc = FAILED;
ENTER;
- starget_for_each_device(starget, &cancel_rc, ibmvfc_dev_cancel_all);
+ starget_for_each_device(starget, &cancel_rc, ibmvfc_dev_cancel_all_abts);
starget_for_each_device(starget, &abort_rc, ibmvfc_dev_abort_all);
if (!cancel_rc && !abort_rc)
@@ -2297,13 +2583,13 @@
/* Send back a response */
rc = ibmvfc_send_crq_init_complete(vhost);
if (rc == 0)
- ibmvfc_init_host(vhost, 0);
+ ibmvfc_init_host(vhost);
else
dev_err(vhost->dev, "Unable to send init rsp. rc=%ld\n", rc);
break;
case IBMVFC_CRQ_INIT_COMPLETE:
dev_info(vhost->dev, "Partner initialization complete\n");
- ibmvfc_init_host(vhost, 0);
+ ibmvfc_init_host(vhost);
break;
default:
dev_err(vhost->dev, "Unknown crq message type: %d\n", crq->format);
@@ -2478,12 +2764,17 @@
* ibmvfc_change_queue_depth - Change the device's queue depth
* @sdev: scsi device struct
* @qdepth: depth to set
+ * @reason: calling context
*
* Return value:
* actual depth set
**/
-static int ibmvfc_change_queue_depth(struct scsi_device *sdev, int qdepth)
+static int ibmvfc_change_queue_depth(struct scsi_device *sdev, int qdepth,
+ int reason)
{
+ if (reason != SCSI_QDEPTH_DEFAULT)
+ return -EOPNOTSUPP;
+
if (qdepth > IBMVFC_MAX_CMDS_PER_LUN)
qdepth = IBMVFC_MAX_CMDS_PER_LUN;
@@ -3725,7 +4016,7 @@
case IBMVFC_MAD_SUCCESS:
if (list_empty(&vhost->sent) &&
vhost->action == IBMVFC_HOST_ACTION_LOGO_WAIT) {
- ibmvfc_init_host(vhost, 0);
+ ibmvfc_init_host(vhost);
return;
}
break;
@@ -3903,6 +4194,8 @@
rport->supported_classes |= FC_COS_CLASS2;
if (tgt->service_parms.class3_parms[0] & 0x80000000)
rport->supported_classes |= FC_COS_CLASS3;
+ if (rport->rqst_q)
+ blk_queue_max_hw_segments(rport->rqst_q, 1);
} else
tgt_dbg(tgt, "rport add failed\n");
spin_unlock_irqrestore(vhost->host->host_lock, flags);
@@ -4342,6 +4635,7 @@
init_waitqueue_head(&vhost->work_wait_q);
init_waitqueue_head(&vhost->init_wait_q);
INIT_WORK(&vhost->rport_add_work_q, ibmvfc_rport_add_thread);
+ mutex_init(&vhost->passthru_mutex);
if ((rc = ibmvfc_alloc_mem(vhost)))
goto free_scsi_host;
@@ -4374,6 +4668,8 @@
goto remove_shost;
}
+ if (shost_to_fc_host(shost)->rqst_q)
+ blk_queue_max_hw_segments(shost_to_fc_host(shost)->rqst_q, 1);
dev_set_drvdata(dev, vhost);
spin_lock(&ibmvfc_driver_lock);
list_add_tail(&vhost->queue, &ibmvfc_head);
@@ -4414,7 +4710,11 @@
ENTER;
ibmvfc_remove_trace_file(&vhost->host->shost_dev.kobj, &ibmvfc_trace_attr);
+
+ spin_lock_irqsave(vhost->host->host_lock, flags);
ibmvfc_link_down(vhost, IBMVFC_HOST_OFFLINE);
+ spin_unlock_irqrestore(vhost->host->host_lock, flags);
+
ibmvfc_wait_while_resetting(vhost);
ibmvfc_release_crq_queue(vhost);
kthread_stop(vhost->work_thread);
@@ -4498,6 +4798,9 @@
.get_starget_port_id = ibmvfc_get_starget_port_id,
.show_starget_port_id = 1,
+
+ .bsg_request = ibmvfc_bsg_request,
+ .bsg_timeout = ibmvfc_bsg_timeout,
};
/**
diff --git a/drivers/scsi/ibmvscsi/ibmvfc.h b/drivers/scsi/ibmvscsi/ibmvfc.h
index 007fa1c9..d25106a 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.h
+++ b/drivers/scsi/ibmvscsi/ibmvfc.h
@@ -29,8 +29,8 @@
#include "viosrp.h"
#define IBMVFC_NAME "ibmvfc"
-#define IBMVFC_DRIVER_VERSION "1.0.6"
-#define IBMVFC_DRIVER_DATE "(May 28, 2009)"
+#define IBMVFC_DRIVER_VERSION "1.0.7"
+#define IBMVFC_DRIVER_DATE "(October 16, 2009)"
#define IBMVFC_DEFAULT_TIMEOUT 60
#define IBMVFC_ADISC_CANCEL_TIMEOUT 45
@@ -58,9 +58,10 @@
* 1 for ERP
* 1 for initialization
* 1 for NPIV Logout
+ * 2 for BSG passthru
* 2 for each discovery thread
*/
-#define IBMVFC_NUM_INTERNAL_REQ (1 + 1 + 1 + (disc_threads * 2))
+#define IBMVFC_NUM_INTERNAL_REQ (1 + 1 + 1 + 2 + (disc_threads * 2))
#define IBMVFC_MAD_SUCCESS 0x00
#define IBMVFC_MAD_NOT_SUPPORTED 0xF1
@@ -466,7 +467,10 @@
u16 error;
u32 flags;
#define IBMVFC_FC_ELS 0x01
+#define IBMVFC_FC_CT_IU 0x02
u32 cancel_key;
+#define IBMVFC_PASSTHRU_CANCEL_KEY 0x80000000
+#define IBMVFC_INTERNAL_CANCEL_KEY 0x80000001
u32 reserved;
struct srp_direct_buf cmd;
struct srp_direct_buf rsp;
@@ -693,6 +697,7 @@
int disc_buf_sz;
int log_level;
struct ibmvfc_discover_targets_buf *disc_buf;
+ struct mutex passthru_mutex;
int task_set;
int init_retries;
int discovery_threads;
@@ -702,6 +707,7 @@
int delay_init;
int scan_complete;
int logged_in;
+ int aborting_passthru;
int events_to_log;
#define IBMVFC_AE_LINKUP 0x0001
#define IBMVFC_AE_LINKDOWN 0x0002
diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c
index d9b0e9d..e475b79 100644
--- a/drivers/scsi/ibmvscsi/ibmvscsi.c
+++ b/drivers/scsi/ibmvscsi/ibmvscsi.c
@@ -1637,12 +1637,17 @@
* ibmvscsi_change_queue_depth - Change the device's queue depth
* @sdev: scsi device struct
* @qdepth: depth to set
+ * @reason: calling context
*
* Return value:
* actual depth set
**/
-static int ibmvscsi_change_queue_depth(struct scsi_device *sdev, int qdepth)
+static int ibmvscsi_change_queue_depth(struct scsi_device *sdev, int qdepth,
+ int reason)
{
+ if (reason != SCSI_QDEPTH_DEFAULT)
+ return -EOPNOTSUPP;
+
if (qdepth > IBMVSCSI_MAX_CMDS_PER_LUN)
qdepth = IBMVSCSI_MAX_CMDS_PER_LUN;
diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index 76d294f..206c2fa 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -3367,16 +3367,21 @@
* ipr_change_queue_depth - Change the device's queue depth
* @sdev: scsi device struct
* @qdepth: depth to set
+ * @reason: calling context
*
* Return value:
* actual depth set
**/
-static int ipr_change_queue_depth(struct scsi_device *sdev, int qdepth)
+static int ipr_change_queue_depth(struct scsi_device *sdev, int qdepth,
+ int reason)
{
struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)sdev->host->hostdata;
struct ipr_resource_entry *res;
unsigned long lock_flags = 0;
+ if (reason != SCSI_QDEPTH_DEFAULT)
+ return -EOPNOTSUPP;
+
spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
res = (struct ipr_resource_entry *)sdev->hostdata;
diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c
index edc49ca..517da3f 100644
--- a/drivers/scsi/iscsi_tcp.c
+++ b/drivers/scsi/iscsi_tcp.c
@@ -903,7 +903,7 @@
ISCSI_USERNAME | ISCSI_PASSWORD |
ISCSI_USERNAME_IN | ISCSI_PASSWORD_IN |
ISCSI_FAST_ABORT | ISCSI_ABORT_TMO |
- ISCSI_LU_RESET_TMO |
+ ISCSI_LU_RESET_TMO | ISCSI_TGT_RESET_TMO |
ISCSI_PING_TMO | ISCSI_RECV_TMO |
ISCSI_IFACE_NAME | ISCSI_INITIATOR_NAME,
.host_param_mask = ISCSI_HOST_HWADDRESS | ISCSI_HOST_IPADDRESS |
diff --git a/drivers/scsi/libfc/Makefile b/drivers/scsi/libfc/Makefile
index 55f982d..4bb23ac 100644
--- a/drivers/scsi/libfc/Makefile
+++ b/drivers/scsi/libfc/Makefile
@@ -3,10 +3,12 @@
obj-$(CONFIG_LIBFC) += libfc.o
libfc-objs := \
+ fc_libfc.o \
fc_disc.o \
fc_exch.o \
fc_elsct.o \
fc_frame.o \
fc_lport.o \
fc_rport.o \
- fc_fcp.o
+ fc_fcp.o \
+ fc_npiv.o
diff --git a/drivers/scsi/libfc/fc_disc.c b/drivers/scsi/libfc/fc_disc.c
index c48799e..9b0a519 100644
--- a/drivers/scsi/libfc/fc_disc.c
+++ b/drivers/scsi/libfc/fc_disc.c
@@ -40,6 +40,8 @@
#include <scsi/libfc.h>
+#include "fc_libfc.h"
+
#define FC_DISC_RETRY_LIMIT 3 /* max retries */
#define FC_DISC_RETRY_DELAY 500UL /* (msecs) delay */
@@ -51,8 +53,8 @@
static void fc_disc_restart(struct fc_disc *);
/**
- * fc_disc_stop_rports() - delete all the remote ports associated with the lport
- * @disc: The discovery job to stop rports on
+ * fc_disc_stop_rports() - Delete all the remote ports associated with the lport
+ * @disc: The discovery job to stop remote ports on
*
* Locking Note: This function expects that the lport mutex is locked before
* calling it.
@@ -72,9 +74,9 @@
/**
* fc_disc_recv_rscn_req() - Handle Registered State Change Notification (RSCN)
- * @sp: Current sequence of the RSCN exchange
- * @fp: RSCN Frame
- * @lport: Fibre Channel host port instance
+ * @sp: The sequence of the RSCN exchange
+ * @fp: The RSCN frame
+ * @lport: The local port that the request will be sent on
*
* Locking Note: This function expects that the disc_mutex is locked
* before it is called.
@@ -183,9 +185,9 @@
/**
* fc_disc_recv_req() - Handle incoming requests
- * @sp: Current sequence of the request exchange
- * @fp: The frame
- * @lport: The FC local port
+ * @sp: The sequence of the request exchange
+ * @fp: The request frame
+ * @lport: The local port receiving the request
*
* Locking Note: This function is called from the EM and will lock
* the disc_mutex before calling the handler for the
@@ -213,7 +215,7 @@
/**
* fc_disc_restart() - Restart discovery
- * @lport: FC discovery context
+ * @disc: The discovery object to be restarted
*
* Locking Note: This function expects that the disc mutex
* is already locked.
@@ -240,9 +242,9 @@
}
/**
- * fc_disc_start() - Fibre Channel Target discovery
- * @lport: FC local port
- * @disc_callback: function to be called when discovery is complete
+ * fc_disc_start() - Start discovery on a local port
+ * @lport: The local port to have discovery started on
+ * @disc_callback: Callback function to be called when discovery is complete
*/
static void fc_disc_start(void (*disc_callback)(struct fc_lport *,
enum fc_disc_event),
@@ -263,8 +265,8 @@
/**
* fc_disc_done() - Discovery has been completed
- * @disc: FC discovery context
- * @event: discovery completion status
+ * @disc: The discovery context
+ * @event: The discovery completion status
*
* Locking Note: This function expects that the disc mutex is locked before
* it is called. The discovery callback is then made with the lock released,
@@ -284,8 +286,8 @@
}
/*
- * Go through all remote ports. If they were found in the latest
- * discovery, reverify or log them in. Otherwise, log them out.
+ * Go through all remote ports. If they were found in the latest
+ * discovery, reverify or log them in. Otherwise, log them out.
* Skip ports which were never discovered. These are the dNS port
* and ports which were created by PLOGI.
*/
@@ -305,8 +307,8 @@
/**
* fc_disc_error() - Handle error on dNS request
- * @disc: FC discovery context
- * @fp: The frame pointer
+ * @disc: The discovery context
+ * @fp: The error code encoded as a frame pointer
*/
static void fc_disc_error(struct fc_disc *disc, struct fc_frame *fp)
{
@@ -342,7 +344,7 @@
/**
* fc_disc_gpn_ft_req() - Send Get Port Names by FC-4 type (GPN_FT) request
- * @lport: FC discovery context
+ * @lport: The discovery context
*
* Locking Note: This function expects that the disc_mutex is locked
* before it is called.
@@ -368,17 +370,17 @@
if (lport->tt.elsct_send(lport, 0, fp,
FC_NS_GPN_FT,
fc_disc_gpn_ft_resp,
- disc, lport->e_d_tov))
+ disc, 3 * lport->r_a_tov))
return;
err:
- fc_disc_error(disc, fp);
+ fc_disc_error(disc, NULL);
}
/**
* fc_disc_gpn_ft_parse() - Parse the body of the dNS GPN_FT response.
- * @lport: Fibre Channel host port instance
- * @buf: GPN_FT response buffer
- * @len: size of response buffer
+ * @lport: The local port the GPN_FT was received on
+ * @buf: The GPN_FT response buffer
+ * @len: The size of response buffer
*
* Goes through the list of IDs and names resulting from a request.
*/
@@ -477,10 +479,8 @@
}
/**
- * fc_disc_timeout() - Retry handler for the disc component
- * @work: Structure holding disc obj that needs retry discovery
- *
- * Handle retry of memory allocation for remote ports.
+ * fc_disc_timeout() - Handler for discovery timeouts
+ * @work: Structure holding discovery context that needs to retry discovery
*/
static void fc_disc_timeout(struct work_struct *work)
{
@@ -494,9 +494,9 @@
/**
* fc_disc_gpn_ft_resp() - Handle a response frame from Get Port Names (GPN_FT)
- * @sp: Current sequence of GPN_FT exchange
- * @fp: response frame
- * @lp_arg: Fibre Channel host port instance
+ * @sp: The sequence that the GPN_FT response was received on
+ * @fp: The GPN_FT response frame
+ * @lp_arg: The discovery context
*
* Locking Note: This function is called without disc mutex held, and
* should do all its processing with the mutex held
@@ -567,9 +567,9 @@
/**
* fc_disc_gpn_id_resp() - Handle a response frame from Get Port Names (GPN_ID)
- * @sp: exchange sequence
- * @fp: response frame
- * @rdata_arg: remote port private data
+ * @sp: The sequence the GPN_ID is on
+ * @fp: The response frame
+ * @rdata_arg: The remote port that sent the GPN_ID response
*
* Locking Note: This function is called without disc mutex held.
*/
@@ -637,7 +637,7 @@
/**
* fc_disc_gpn_id_req() - Send Get Port Names by ID (GPN_ID) request
- * @lport: local port
+ * @lport: The local port to initiate discovery on
* @rdata: remote port private data
*
* Locking Note: This function expects that the disc_mutex is locked
@@ -654,7 +654,8 @@
if (!fp)
return -ENOMEM;
if (!lport->tt.elsct_send(lport, rdata->ids.port_id, fp, FC_NS_GPN_ID,
- fc_disc_gpn_id_resp, rdata, lport->e_d_tov))
+ fc_disc_gpn_id_resp, rdata,
+ 3 * lport->r_a_tov))
return -ENOMEM;
kref_get(&rdata->kref);
return 0;
@@ -662,8 +663,8 @@
/**
* fc_disc_single() - Discover the directory information for a single target
- * @lport: local port
- * @dp: The port to rediscover
+ * @lport: The local port the remote port is associated with
+ * @dp: The port to rediscover
*
* Locking Note: This function expects that the disc_mutex is locked
* before it is called.
@@ -681,7 +682,7 @@
/**
* fc_disc_stop() - Stop discovery for a given lport
- * @lport: The lport that discovery should stop for
+ * @lport: The local port that discovery should stop on
*/
void fc_disc_stop(struct fc_lport *lport)
{
@@ -695,7 +696,7 @@
/**
* fc_disc_stop_final() - Stop discovery for a given lport
- * @lport: The lport that discovery should stop for
+ * @lport: The lport that discovery should stop on
*
* This function will block until discovery has been
* completely stopped and all rports have been deleted.
@@ -707,8 +708,8 @@
}
/**
- * fc_disc_init() - Initialize the discovery block
- * @lport: FC local port
+ * fc_disc_init() - Initialize the discovery layer for a local port
+ * @lport: The local port that needs the discovery layer to be initialized
*/
int fc_disc_init(struct fc_lport *lport)
{
diff --git a/drivers/scsi/libfc/fc_elsct.c b/drivers/scsi/libfc/fc_elsct.c
index 5cfa687..5374872 100644
--- a/drivers/scsi/libfc/fc_elsct.c
+++ b/drivers/scsi/libfc/fc_elsct.c
@@ -28,17 +28,22 @@
#include <scsi/libfc.h>
#include <scsi/fc_encode.h>
-/*
- * fc_elsct_send - sends ELS/CT frame
+/**
+ * fc_elsct_send() - Send an ELS or CT frame
+ * @lport: The local port to send the frame on
+ * @did: The destination ID for the frame
+ * @fp: The frame to be sent
+ * @op: The operational code
+ * @resp: The callback routine when the response is received
+ * @arg: The argument to pass to the response callback routine
+ * @timer_msec: The timeout period for the frame (in msecs)
*/
-static struct fc_seq *fc_elsct_send(struct fc_lport *lport,
- u32 did,
- struct fc_frame *fp,
- unsigned int op,
- void (*resp)(struct fc_seq *,
- struct fc_frame *fp,
- void *arg),
- void *arg, u32 timer_msec)
+struct fc_seq *fc_elsct_send(struct fc_lport *lport, u32 did,
+ struct fc_frame *fp, unsigned int op,
+ void (*resp)(struct fc_seq *,
+ struct fc_frame *,
+ void *),
+ void *arg, u32 timer_msec)
{
enum fc_rctl r_ctl;
enum fc_fh_type fh_type;
@@ -53,15 +58,22 @@
did = FC_FID_DIR_SERV;
}
- if (rc)
+ if (rc) {
+ fc_frame_free(fp);
return NULL;
+ }
fc_fill_fc_hdr(fp, r_ctl, did, fc_host_port_id(lport->host), fh_type,
FC_FC_FIRST_SEQ | FC_FC_END_SEQ | FC_FC_SEQ_INIT, 0);
return lport->tt.exch_seq_send(lport, fp, resp, NULL, arg, timer_msec);
}
+EXPORT_SYMBOL(fc_elsct_send);
+/**
+ * fc_elsct_init() - Initialize the ELS/CT layer
+ * @lport: The local port to initialize the ELS/CT layer for
+ */
int fc_elsct_init(struct fc_lport *lport)
{
if (!lport->tt.elsct_send)
@@ -72,12 +84,15 @@
EXPORT_SYMBOL(fc_elsct_init);
/**
- * fc_els_resp_type() - return string describing ELS response for debug.
- * @fp: frame pointer with possible error code.
+ * fc_els_resp_type() - Return a string describing the ELS response
+ * @fp: The frame pointer or possible error code
*/
const char *fc_els_resp_type(struct fc_frame *fp)
{
const char *msg;
+ struct fc_frame_header *fh;
+ struct fc_ct_hdr *ct;
+
if (IS_ERR(fp)) {
switch (-PTR_ERR(fp)) {
case FC_NO_ERR:
@@ -94,15 +109,41 @@
break;
}
} else {
- switch (fc_frame_payload_op(fp)) {
- case ELS_LS_ACC:
- msg = "accept";
+ fh = fc_frame_header_get(fp);
+ switch (fh->fh_type) {
+ case FC_TYPE_ELS:
+ switch (fc_frame_payload_op(fp)) {
+ case ELS_LS_ACC:
+ msg = "accept";
+ break;
+ case ELS_LS_RJT:
+ msg = "reject";
+ break;
+ default:
+ msg = "response unknown ELS";
+ break;
+ }
break;
- case ELS_LS_RJT:
- msg = "reject";
+ case FC_TYPE_CT:
+ ct = fc_frame_payload_get(fp, sizeof(*ct));
+ if (ct) {
+ switch (ntohs(ct->ct_cmd)) {
+ case FC_FS_ACC:
+ msg = "CT accept";
+ break;
+ case FC_FS_RJT:
+ msg = "CT reject";
+ break;
+ default:
+ msg = "response unknown CT";
+ break;
+ }
+ } else {
+ msg = "short CT response";
+ }
break;
default:
- msg = "response unknown ELS";
+ msg = "response not ELS or CT";
break;
}
}
diff --git a/drivers/scsi/libfc/fc_exch.c b/drivers/scsi/libfc/fc_exch.c
index c1c1574..19d711c 100644
--- a/drivers/scsi/libfc/fc_exch.c
+++ b/drivers/scsi/libfc/fc_exch.c
@@ -32,10 +32,13 @@
#include <scsi/libfc.h>
#include <scsi/fc_encode.h>
+#include "fc_libfc.h"
+
u16 fc_cpu_mask; /* cpu mask for possible cpus */
EXPORT_SYMBOL(fc_cpu_mask);
static u16 fc_cpu_order; /* 2's power to represent total possible cpus */
-static struct kmem_cache *fc_em_cachep; /* cache for exchanges */
+static struct kmem_cache *fc_em_cachep; /* cache for exchanges */
+struct workqueue_struct *fc_exch_workqueue;
/*
* Structure and function definitions for managing Fibre Channel Exchanges
@@ -50,35 +53,46 @@
* fc_seq holds the state for an individual sequence.
*/
-/*
- * Per cpu exchange pool
+/**
+ * struct fc_exch_pool - Per cpu exchange pool
+ * @next_index: Next possible free exchange index
+ * @total_exches: Total allocated exchanges
+ * @lock: Exch pool lock
+ * @ex_list: List of exchanges
*
* This structure manages per cpu exchanges in array of exchange pointers.
* This array is allocated followed by struct fc_exch_pool memory for
* assigned range of exchanges to per cpu pool.
*/
struct fc_exch_pool {
- u16 next_index; /* next possible free exchange index */
- u16 total_exches; /* total allocated exchanges */
- spinlock_t lock; /* exch pool lock */
- struct list_head ex_list; /* allocated exchanges list */
+ u16 next_index;
+ u16 total_exches;
+ spinlock_t lock;
+ struct list_head ex_list;
};
-/*
- * Exchange manager.
+/**
+ * struct fc_exch_mgr - The Exchange Manager (EM).
+ * @class: Default class for new sequences
+ * @kref: Reference counter
+ * @min_xid: Minimum exchange ID
+ * @max_xid: Maximum exchange ID
+ * @ep_pool: Reserved exchange pointers
+ * @pool_max_index: Max exch array index in exch pool
+ * @pool: Per cpu exch pool
+ * @stats: Statistics structure
*
* This structure is the center for creating exchanges and sequences.
* It manages the allocation of exchange IDs.
*/
struct fc_exch_mgr {
- enum fc_class class; /* default class for sequences */
- struct kref kref; /* exchange mgr reference count */
- u16 min_xid; /* min exchange ID */
- u16 max_xid; /* max exchange ID */
- struct list_head ex_list; /* allocated exchanges list */
- mempool_t *ep_pool; /* reserve ep's */
- u16 pool_max_index; /* max exch array index in exch pool */
- struct fc_exch_pool *pool; /* per cpu exch pool */
+ enum fc_class class;
+ struct kref kref;
+ u16 min_xid;
+ u16 max_xid;
+ mempool_t *ep_pool;
+ u16 pool_max_index;
+ struct fc_exch_pool *pool;
/*
* currently exchange mgr stats are updated but not used.
@@ -96,6 +110,18 @@
};
#define fc_seq_exch(sp) container_of(sp, struct fc_exch, seq)
+/**
+ * struct fc_exch_mgr_anchor - primary structure for list of EMs
+ * @ema_list: Exchange Manager Anchor list
+ * @mp: Exchange Manager associated with this anchor
+ * @match: Routine to determine if this anchor's EM should be used
+ *
+ * When walking the list of anchors the match routine will be called
+ * for each anchor to determine if that EM should be used. The last
+ * anchor in the list will always match to handle any exchanges not
+ * handled by other EMs. The non-default EMs would be added to the
+ * anchor list by HW that provides FCoE offloads.
+ */
struct fc_exch_mgr_anchor {
struct list_head ema_list;
struct fc_exch_mgr *mp;
@@ -108,7 +134,6 @@
enum fc_els_rjt_explan);
static void fc_exch_els_rec(struct fc_seq *, struct fc_frame *);
static void fc_exch_els_rrq(struct fc_seq *, struct fc_frame *);
-static struct fc_seq *fc_seq_start_next_locked(struct fc_seq *sp);
/*
* Internal implementation notes.
@@ -196,6 +221,15 @@
#define FC_TABLE_SIZE(x) (sizeof(x) / sizeof(x[0]))
+/**
+ * fc_exch_name_lookup() - Lookup name by opcode
+ * @op: Opcode to be looked up
+ * @table: Opcode/name table
+ * @max_index: Index not to be exceeded
+ *
+ * This routine is used to determine a human-readable string identifying
+ * a R_CTL opcode.
+ */
static inline const char *fc_exch_name_lookup(unsigned int op, char **table,
unsigned int max_index)
{
@@ -208,25 +242,34 @@
return name;
}
+/**
+ * fc_exch_rctl_name() - Wrapper routine for fc_exch_name_lookup()
+ * @op: The opcode to be looked up
+ */
static const char *fc_exch_rctl_name(unsigned int op)
{
return fc_exch_name_lookup(op, fc_exch_rctl_names,
FC_TABLE_SIZE(fc_exch_rctl_names));
}
-/*
- * Hold an exchange - keep it from being freed.
+/**
+ * fc_exch_hold() - Increment an exchange's reference count
+ * @ep: Echange to be held
*/
-static void fc_exch_hold(struct fc_exch *ep)
+static inline void fc_exch_hold(struct fc_exch *ep)
{
atomic_inc(&ep->ex_refcnt);
}
-/*
- * setup fc hdr by initializing few more FC header fields and sof/eof.
- * Initialized fields by this func:
- * - fh_ox_id, fh_rx_id, fh_seq_id, fh_seq_cnt
- * - sof and eof
+/**
+ * fc_exch_setup_hdr() - Initialize a FC header by initializing some fields
+ * and determine SOF and EOF.
+ * @ep: The exchange to that will use the header
+ * @fp: The frame whose header is to be modified
+ * @f_ctl: F_CTL bits that will be used for the frame header
+ *
+ * The fields initialized by this routine are: fh_ox_id, fh_rx_id,
+ * fh_seq_id, fh_seq_cnt and the SOF and EOF.
*/
static void fc_exch_setup_hdr(struct fc_exch *ep, struct fc_frame *fp,
u32 f_ctl)
@@ -243,7 +286,7 @@
if (fc_sof_needs_ack(ep->class))
fr_eof(fp) = FC_EOF_N;
/*
- * Form f_ctl.
+ * From F_CTL.
* The number of fill bytes to make the length a 4-byte
* multiple is the low order 2-bits of the f_ctl.
* The fill itself will have been cleared by the frame
@@ -273,10 +316,12 @@
fh->fh_seq_cnt = htons(ep->seq.cnt);
}
-
-/*
- * Release a reference to an exchange.
- * If the refcnt goes to zero and the exchange is complete, it is freed.
+/**
+ * fc_exch_release() - Decrement an exchange's reference count
+ * @ep: Exchange to be released
+ *
+ * If the reference count reaches zero and the exchange is complete,
+ * it is freed.
*/
static void fc_exch_release(struct fc_exch *ep)
{
@@ -291,6 +336,10 @@
}
}
+/**
+ * fc_exch_done_locked() - Complete an exchange with the exchange lock held
+ * @ep: The exchange that is complete
+ */
static int fc_exch_done_locked(struct fc_exch *ep)
{
int rc = 1;
@@ -315,6 +364,15 @@
return rc;
}
+/**
+ * fc_exch_ptr_get() - Return an exchange from an exchange pool
+ * @pool: Exchange Pool to get an exchange from
+ * @index: Index of the exchange within the pool
+ *
+ * Use the index to get an exchange from within an exchange pool. exches
+ * will point to an array of exchange pointers. The index will select
+ * the exchange within the array.
+ */
static inline struct fc_exch *fc_exch_ptr_get(struct fc_exch_pool *pool,
u16 index)
{
@@ -322,12 +380,22 @@
return exches[index];
}
+/**
+ * fc_exch_ptr_set() - Assign an exchange to a slot in an exchange pool
+ * @pool: The pool to assign the exchange to
+ * @index: The index in the pool where the exchange will be assigned
+ * @ep: The exchange to assign to the pool
+ */
static inline void fc_exch_ptr_set(struct fc_exch_pool *pool, u16 index,
struct fc_exch *ep)
{
((struct fc_exch **)(pool + 1))[index] = ep;
}
+/**
+ * fc_exch_delete() - Delete an exchange
+ * @ep: The exchange to be deleted
+ */
static void fc_exch_delete(struct fc_exch *ep)
{
struct fc_exch_pool *pool;
@@ -343,8 +411,14 @@
fc_exch_release(ep); /* drop hold for exch in mp */
}
-/*
- * Internal version of fc_exch_timer_set - used with lock held.
+/**
+ * fc_exch_timer_set_locked() - Start a timer for an exchange w/ the
+ * the exchange lock held
+ * @ep: The exchange whose timer will start
+ * @timer_msec: The timeout period
+ *
+ * Used for upper level protocols to time out the exchange.
+ * The timer is cancelled when it fires or when the exchange completes.
*/
static inline void fc_exch_timer_set_locked(struct fc_exch *ep,
unsigned int timer_msec)
@@ -354,17 +428,15 @@
FC_EXCH_DBG(ep, "Exchange timer armed\n");
- if (schedule_delayed_work(&ep->timeout_work,
- msecs_to_jiffies(timer_msec)))
+ if (queue_delayed_work(fc_exch_workqueue, &ep->timeout_work,
+ msecs_to_jiffies(timer_msec)))
fc_exch_hold(ep); /* hold for timer */
}
-/*
- * Set timer for an exchange.
- * The time is a minimum delay in milliseconds until the timer fires.
- * Used for upper level protocols to time out the exchange.
- * The timer is cancelled when it fires or when the exchange completes.
- * Returns non-zero if a timer couldn't be allocated.
+/**
+ * fc_exch_timer_set() - Lock the exchange and set the timer
+ * @ep: The exchange whose timer will start
+ * @timer_msec: The timeout period
*/
static void fc_exch_timer_set(struct fc_exch *ep, unsigned int timer_msec)
{
@@ -373,7 +445,115 @@
spin_unlock_bh(&ep->ex_lock);
}
-int fc_seq_exch_abort(const struct fc_seq *req_sp, unsigned int timer_msec)
+/**
+ * fc_seq_send() - Send a frame using existing sequence/exchange pair
+ * @lport: The local port that the exchange will be sent on
+ * @sp: The sequence to be sent
+ * @fp: The frame to be sent on the exchange
+ */
+static int fc_seq_send(struct fc_lport *lport, struct fc_seq *sp,
+ struct fc_frame *fp)
+{
+ struct fc_exch *ep;
+ struct fc_frame_header *fh = fc_frame_header_get(fp);
+ int error;
+ u32 f_ctl;
+
+ ep = fc_seq_exch(sp);
+ WARN_ON((ep->esb_stat & ESB_ST_SEQ_INIT) != ESB_ST_SEQ_INIT);
+
+ f_ctl = ntoh24(fh->fh_f_ctl);
+ fc_exch_setup_hdr(ep, fp, f_ctl);
+
+ /*
+ * update sequence count if this frame is carrying
+ * multiple FC frames when sequence offload is enabled
+ * by LLD.
+ */
+ if (fr_max_payload(fp))
+ sp->cnt += DIV_ROUND_UP((fr_len(fp) - sizeof(*fh)),
+ fr_max_payload(fp));
+ else
+ sp->cnt++;
+
+ /*
+ * Send the frame.
+ */
+ error = lport->tt.frame_send(lport, fp);
+
+ /*
+ * Update the exchange and sequence flags,
+ * assuming all frames for the sequence have been sent.
+ * We can only be called to send once for each sequence.
+ */
+ spin_lock_bh(&ep->ex_lock);
+ ep->f_ctl = f_ctl & ~FC_FC_FIRST_SEQ; /* not first seq */
+ if (f_ctl & (FC_FC_END_SEQ | FC_FC_SEQ_INIT))
+ ep->esb_stat &= ~ESB_ST_SEQ_INIT;
+ spin_unlock_bh(&ep->ex_lock);
+ return error;
+}
+
+/**
+ * fc_seq_alloc() - Allocate a sequence for a given exchange
+ * @ep: The exchange to allocate a new sequence for
+ * @seq_id: The sequence ID to be used
+ *
+ * We don't support multiple originated sequences on the same exchange.
+ * By implication, any previously originated sequence on this exchange
+ * is complete, and we reallocate the same sequence.
+ */
+static struct fc_seq *fc_seq_alloc(struct fc_exch *ep, u8 seq_id)
+{
+ struct fc_seq *sp;
+
+ sp = &ep->seq;
+ sp->ssb_stat = 0;
+ sp->cnt = 0;
+ sp->id = seq_id;
+ return sp;
+}
+
+/**
+ * fc_seq_start_next_locked() - Allocate a new sequence on the same
+ * exchange as the supplied sequence
+ * @sp: The sequence/exchange to get a new sequence for
+ */
+static struct fc_seq *fc_seq_start_next_locked(struct fc_seq *sp)
+{
+ struct fc_exch *ep = fc_seq_exch(sp);
+
+ sp = fc_seq_alloc(ep, ep->seq_id++);
+ FC_EXCH_DBG(ep, "f_ctl %6x seq %2x\n",
+ ep->f_ctl, sp->id);
+ return sp;
+}
+
+/**
+ * fc_seq_start_next() - Lock the exchange and get a new sequence
+ * for a given sequence/exchange pair
+ * @sp: The sequence/exchange to get a new exchange for
+ */
+static struct fc_seq *fc_seq_start_next(struct fc_seq *sp)
+{
+ struct fc_exch *ep = fc_seq_exch(sp);
+
+ spin_lock_bh(&ep->ex_lock);
+ sp = fc_seq_start_next_locked(sp);
+ spin_unlock_bh(&ep->ex_lock);
+
+ return sp;
+}
+
+/**
+ * fc_seq_exch_abort() - Abort an exchange and sequence
+ * @req_sp: The sequence to be aborted
+ * @timer_msec: The period of time to wait before aborting
+ *
+ * Generally called because of a timeout or an abort from the upper layer.
+ */
+static int fc_seq_exch_abort(const struct fc_seq *req_sp,
+ unsigned int timer_msec)
{
struct fc_seq *sp;
struct fc_exch *ep;
@@ -422,11 +602,10 @@
error = -ENOBUFS;
return error;
}
-EXPORT_SYMBOL(fc_seq_exch_abort);
-/*
- * Exchange timeout - handle exchange timer expiration.
- * The timer will have been cancelled before this is called.
+/**
+ * fc_exch_timeout() - Handle exchange timer expiration
+ * @work: The work_struct identifying the exchange that timed out
*/
static void fc_exch_timeout(struct work_struct *work)
{
@@ -474,28 +653,10 @@
fc_exch_release(ep);
}
-/*
- * Allocate a sequence.
- *
- * We don't support multiple originated sequences on the same exchange.
- * By implication, any previously originated sequence on this exchange
- * is complete, and we reallocate the same sequence.
- */
-static struct fc_seq *fc_seq_alloc(struct fc_exch *ep, u8 seq_id)
-{
- struct fc_seq *sp;
-
- sp = &ep->seq;
- sp->ssb_stat = 0;
- sp->cnt = 0;
- sp->id = seq_id;
- return sp;
-}
-
/**
- * fc_exch_em_alloc() - allocate an exchange from a specified EM.
- * @lport: ptr to the local port
- * @mp: ptr to the exchange manager
+ * fc_exch_em_alloc() - Allocate an exchange from a specified EM.
+ * @lport: The local port that the exchange is for
+ * @mp: The exchange manager that will allocate the exchange
*
* Returns pointer to allocated fc_exch with exch lock held.
*/
@@ -563,16 +724,18 @@
}
/**
- * fc_exch_alloc() - allocate an exchange.
- * @lport: ptr to the local port
- * @fp: ptr to the FC frame
+ * fc_exch_alloc() - Allocate an exchange from an EM on a
+ * local port's list of EMs.
+ * @lport: The local port that will own the exchange
+ * @fp: The FC frame that the exchange will be for
*
- * This function walks the list of the exchange manager(EM)
- * anchors to select a EM for new exchange allocation. The
- * EM is selected having either a NULL match function pointer
- * or call to match function returning true.
+ * This function walks the list of exchange manager(EM)
+ * anchors to select an EM for a new exchange allocation. The
+ * EM is selected when a NULL match function pointer is encountered
+ * or when a call to a match function returns true.
*/
-struct fc_exch *fc_exch_alloc(struct fc_lport *lport, struct fc_frame *fp)
+static struct fc_exch *fc_exch_alloc(struct fc_lport *lport,
+ struct fc_frame *fp)
{
struct fc_exch_mgr_anchor *ema;
struct fc_exch *ep;
@@ -586,10 +749,11 @@
}
return NULL;
}
-EXPORT_SYMBOL(fc_exch_alloc);
-/*
- * Lookup and hold an exchange.
+/**
+ * fc_exch_find() - Lookup and hold an exchange
+ * @mp: The exchange manager to lookup the exchange from
+ * @xid: The XID of the exchange to look up
*/
static struct fc_exch *fc_exch_find(struct fc_exch_mgr *mp, u16 xid)
{
@@ -609,7 +773,13 @@
return ep;
}
-void fc_exch_done(struct fc_seq *sp)
+
+/**
+ * fc_exch_done() - Indicate that an exchange/sequence tuple is complete and
+ * the memory allocated for the related objects may be freed.
+ * @sp: The sequence that has completed
+ */
+static void fc_exch_done(struct fc_seq *sp)
{
struct fc_exch *ep = fc_seq_exch(sp);
int rc;
@@ -620,10 +790,13 @@
if (!rc)
fc_exch_delete(ep);
}
-EXPORT_SYMBOL(fc_exch_done);
-/*
- * Allocate a new exchange as responder.
+/**
+ * fc_exch_resp() - Allocate a new exchange for a response frame
+ * @lport: The local port that the exchange was for
+ * @mp: The exchange manager to allocate the exchange from
+ * @fp: The response frame
+ *
* Sets the responder ID in the frame header.
*/
static struct fc_exch *fc_exch_resp(struct fc_lport *lport,
@@ -664,8 +837,13 @@
return ep;
}
-/*
- * Find a sequence for receive where the other end is originating the sequence.
+/**
+ * fc_seq_lookup_recip() - Find a sequence where the other end
+ * originated the sequence
+ * @lport: The local port that the frame was sent to
+ * @mp: The Exchange Manager to lookup the exchange from
+ * @fp: The frame associated with the sequence we're looking for
+ *
* If fc_pf_rjt_reason is FC_RJT_NONE then this function will have a hold
* on the ep that should be released by the caller.
*/
@@ -771,10 +949,12 @@
return reject;
}
-/*
- * Find the sequence for a frame being received.
- * We originated the sequence, so it should be found.
- * We may or may not have originated the exchange.
+/**
+ * fc_seq_lookup_orig() - Find a sequence where this end
+ * originated the sequence
+ * @mp: The Exchange Manager to lookup the exchange from
+ * @fp: The frame associated with the sequence we're looking for
+ *
* Does not hold the sequence for the caller.
*/
static struct fc_seq *fc_seq_lookup_orig(struct fc_exch_mgr *mp,
@@ -806,8 +986,12 @@
return sp;
}
-/*
- * Set addresses for an exchange.
+/**
+ * fc_exch_set_addr() - Set the source and destination IDs for an exchange
+ * @ep: The exchange to set the addresses for
+ * @orig_id: The originator's ID
+ * @resp_id: The responder's ID
+ *
* Note this must be done before the first sequence of the exchange is sent.
*/
static void fc_exch_set_addr(struct fc_exch *ep,
@@ -823,76 +1007,15 @@
}
}
-static struct fc_seq *fc_seq_start_next_locked(struct fc_seq *sp)
-{
- struct fc_exch *ep = fc_seq_exch(sp);
-
- sp = fc_seq_alloc(ep, ep->seq_id++);
- FC_EXCH_DBG(ep, "f_ctl %6x seq %2x\n",
- ep->f_ctl, sp->id);
- return sp;
-}
-/*
- * Allocate a new sequence on the same exchange as the supplied sequence.
- * This will never return NULL.
+/**
+ * fc_seq_els_rsp_send() - Send an ELS response using infomation from
+ * the existing sequence/exchange.
+ * @sp: The sequence/exchange to get information from
+ * @els_cmd: The ELS command to be sent
+ * @els_data: The ELS data to be sent
*/
-struct fc_seq *fc_seq_start_next(struct fc_seq *sp)
-{
- struct fc_exch *ep = fc_seq_exch(sp);
-
- spin_lock_bh(&ep->ex_lock);
- sp = fc_seq_start_next_locked(sp);
- spin_unlock_bh(&ep->ex_lock);
-
- return sp;
-}
-EXPORT_SYMBOL(fc_seq_start_next);
-
-int fc_seq_send(struct fc_lport *lp, struct fc_seq *sp, struct fc_frame *fp)
-{
- struct fc_exch *ep;
- struct fc_frame_header *fh = fc_frame_header_get(fp);
- int error;
- u32 f_ctl;
-
- ep = fc_seq_exch(sp);
- WARN_ON((ep->esb_stat & ESB_ST_SEQ_INIT) != ESB_ST_SEQ_INIT);
-
- f_ctl = ntoh24(fh->fh_f_ctl);
- fc_exch_setup_hdr(ep, fp, f_ctl);
-
- /*
- * update sequence count if this frame is carrying
- * multiple FC frames when sequence offload is enabled
- * by LLD.
- */
- if (fr_max_payload(fp))
- sp->cnt += DIV_ROUND_UP((fr_len(fp) - sizeof(*fh)),
- fr_max_payload(fp));
- else
- sp->cnt++;
-
- /*
- * Send the frame.
- */
- error = lp->tt.frame_send(lp, fp);
-
- /*
- * Update the exchange and sequence flags,
- * assuming all frames for the sequence have been sent.
- * We can only be called to send once for each sequence.
- */
- spin_lock_bh(&ep->ex_lock);
- ep->f_ctl = f_ctl & ~FC_FC_FIRST_SEQ; /* not first seq */
- if (f_ctl & (FC_FC_END_SEQ | FC_FC_SEQ_INIT))
- ep->esb_stat &= ~ESB_ST_SEQ_INIT;
- spin_unlock_bh(&ep->ex_lock);
- return error;
-}
-EXPORT_SYMBOL(fc_seq_send);
-
-void fc_seq_els_rsp_send(struct fc_seq *sp, enum fc_els_cmd els_cmd,
- struct fc_seq_els_data *els_data)
+static void fc_seq_els_rsp_send(struct fc_seq *sp, enum fc_els_cmd els_cmd,
+ struct fc_seq_els_data *els_data)
{
switch (els_cmd) {
case ELS_LS_RJT:
@@ -911,10 +1034,13 @@
FC_EXCH_DBG(fc_seq_exch(sp), "Invalid ELS CMD:%x\n", els_cmd);
}
}
-EXPORT_SYMBOL(fc_seq_els_rsp_send);
-/*
- * Send a sequence, which is also the last sequence in the exchange.
+/**
+ * fc_seq_send_last() - Send a sequence that is the last in the exchange
+ * @sp: The sequence that is to be sent
+ * @fp: The frame that will be sent on the sequence
+ * @rctl: The R_CTL information to be sent
+ * @fh_type: The frame header type
*/
static void fc_seq_send_last(struct fc_seq *sp, struct fc_frame *fp,
enum fc_rctl rctl, enum fc_fh_type fh_type)
@@ -928,9 +1054,12 @@
fc_seq_send(ep->lp, sp, fp);
}
-/*
+/**
+ * fc_seq_send_ack() - Send an acknowledgement that we've received a frame
+ * @sp: The sequence to send the ACK on
+ * @rx_fp: The received frame that is being acknoledged
+ *
* Send ACK_1 (or equiv.) indicating we received something.
- * The frame we're acking is supplied.
*/
static void fc_seq_send_ack(struct fc_seq *sp, const struct fc_frame *rx_fp)
{
@@ -938,14 +1067,14 @@
struct fc_frame_header *rx_fh;
struct fc_frame_header *fh;
struct fc_exch *ep = fc_seq_exch(sp);
- struct fc_lport *lp = ep->lp;
+ struct fc_lport *lport = ep->lp;
unsigned int f_ctl;
/*
* Don't send ACKs for class 3.
*/
if (fc_sof_needs_ack(fr_sof(rx_fp))) {
- fp = fc_frame_alloc(lp, 0);
+ fp = fc_frame_alloc(lport, 0);
if (!fp)
return;
@@ -980,12 +1109,16 @@
else
fr_eof(fp) = FC_EOF_N;
- (void) lp->tt.frame_send(lp, fp);
+ lport->tt.frame_send(lport, fp);
}
}
-/*
- * Send BLS Reject.
+/**
+ * fc_exch_send_ba_rjt() - Send BLS Reject
+ * @rx_fp: The frame being rejected
+ * @reason: The reason the frame is being rejected
+ * @explan: The explaination for the rejection
+ *
* This is for rejecting BA_ABTS only.
*/
static void fc_exch_send_ba_rjt(struct fc_frame *rx_fp,
@@ -996,11 +1129,11 @@
struct fc_frame_header *rx_fh;
struct fc_frame_header *fh;
struct fc_ba_rjt *rp;
- struct fc_lport *lp;
+ struct fc_lport *lport;
unsigned int f_ctl;
- lp = fr_dev(rx_fp);
- fp = fc_frame_alloc(lp, sizeof(*rp));
+ lport = fr_dev(rx_fp);
+ fp = fc_frame_alloc(lport, sizeof(*rp));
if (!fp)
return;
fh = fc_frame_header_get(fp);
@@ -1045,13 +1178,17 @@
if (fc_sof_needs_ack(fr_sof(fp)))
fr_eof(fp) = FC_EOF_N;
- (void) lp->tt.frame_send(lp, fp);
+ lport->tt.frame_send(lport, fp);
}
-/*
- * Handle an incoming ABTS. This would be for target mode usually,
- * but could be due to lost FCP transfer ready, confirm or RRQ.
- * We always handle this as an exchange abort, ignoring the parameter.
+/**
+ * fc_exch_recv_abts() - Handle an incoming ABTS
+ * @ep: The exchange the abort was on
+ * @rx_fp: The ABTS frame
+ *
+ * This would be for target mode usually, but could be due to lost
+ * FCP transfer ready, confirm or RRQ. We always handle this as an
+ * exchange abort, ignoring the parameter.
*/
static void fc_exch_recv_abts(struct fc_exch *ep, struct fc_frame *rx_fp)
{
@@ -1100,10 +1237,14 @@
fc_frame_free(rx_fp);
}
-/*
- * Handle receive where the other end is originating the sequence.
+/**
+ * fc_exch_recv_req() - Handler for an incoming request where is other
+ * end is originating the sequence
+ * @lport: The local port that received the request
+ * @mp: The EM that the exchange is on
+ * @fp: The request frame
*/
-static void fc_exch_recv_req(struct fc_lport *lp, struct fc_exch_mgr *mp,
+static void fc_exch_recv_req(struct fc_lport *lport, struct fc_exch_mgr *mp,
struct fc_frame *fp)
{
struct fc_frame_header *fh = fc_frame_header_get(fp);
@@ -1114,8 +1255,17 @@
u32 f_ctl;
enum fc_pf_rjt_reason reject;
+ /* We can have the wrong fc_lport at this point with NPIV, which is a
+ * problem now that we know a new exchange needs to be allocated
+ */
+ lport = fc_vport_id_lookup(lport, ntoh24(fh->fh_d_id));
+ if (!lport) {
+ fc_frame_free(fp);
+ return;
+ }
+
fr_seq(fp) = NULL;
- reject = fc_seq_lookup_recip(lp, mp, fp);
+ reject = fc_seq_lookup_recip(lport, mp, fp);
if (reject == FC_RJT_NONE) {
sp = fr_seq(fp); /* sequence will be held */
ep = fc_seq_exch(sp);
@@ -1138,17 +1288,21 @@
if (ep->resp)
ep->resp(sp, fp, ep->arg);
else
- lp->tt.lport_recv(lp, sp, fp);
+ lport->tt.lport_recv(lport, sp, fp);
fc_exch_release(ep); /* release from lookup */
} else {
- FC_LPORT_DBG(lp, "exch/seq lookup failed: reject %x\n", reject);
+ FC_LPORT_DBG(lport, "exch/seq lookup failed: reject %x\n",
+ reject);
fc_frame_free(fp);
}
}
-/*
- * Handle receive where the other end is originating the sequence in
- * response to our exchange.
+/**
+ * fc_exch_recv_seq_resp() - Handler for an incoming response where the other
+ * end is the originator of the sequence that is a
+ * response to our initial exchange
+ * @mp: The EM that the exchange is on
+ * @fp: The response frame
*/
static void fc_exch_recv_seq_resp(struct fc_exch_mgr *mp, struct fc_frame *fp)
{
@@ -1239,8 +1393,11 @@
fc_frame_free(fp);
}
-/*
- * Handle receive for a sequence where other end is responding to our sequence.
+/**
+ * fc_exch_recv_resp() - Handler for a sequence where other end is
+ * responding to our sequence
+ * @mp: The EM that the exchange is on
+ * @fp: The response frame
*/
static void fc_exch_recv_resp(struct fc_exch_mgr *mp, struct fc_frame *fp)
{
@@ -1256,9 +1413,13 @@
fc_frame_free(fp);
}
-/*
- * Handle the response to an ABTS for exchange or sequence.
- * This can be BA_ACC or BA_RJT.
+/**
+ * fc_exch_abts_resp() - Handler for a response to an ABT
+ * @ep: The exchange that the frame is on
+ * @fp: The response frame
+ *
+ * This response would be to an ABTS cancelling an exchange or sequence.
+ * The response can be either BA_ACC or BA_RJT
*/
static void fc_exch_abts_resp(struct fc_exch *ep, struct fc_frame *fp)
{
@@ -1333,9 +1494,12 @@
}
-/*
- * Receive BLS sequence.
- * This is always a sequence initiated by the remote side.
+/**
+ * fc_exch_recv_bls() - Handler for a BLS sequence
+ * @mp: The EM that the exchange is on
+ * @fp: The request frame
+ *
+ * The BLS frame is always a sequence initiated by the remote side.
* We may be either the originator or recipient of the exchange.
*/
static void fc_exch_recv_bls(struct fc_exch_mgr *mp, struct fc_frame *fp)
@@ -1392,8 +1556,10 @@
fc_exch_release(ep); /* release hold taken by fc_exch_find */
}
-/*
- * Accept sequence with LS_ACC.
+/**
+ * fc_seq_ls_acc() - Accept sequence with LS_ACC
+ * @req_sp: The request sequence
+ *
* If this fails due to allocation or transmit congestion, assume the
* originator will repeat the sequence.
*/
@@ -1413,8 +1579,12 @@
}
}
-/*
- * Reject sequence with ELS LS_RJT.
+/**
+ * fc_seq_ls_rjt() - Reject a sequence with ELS LS_RJT
+ * @req_sp: The request sequence
+ * @reason: The reason the sequence is being rejected
+ * @explan: The explaination for the rejection
+ *
* If this fails due to allocation or transmit congestion, assume the
* originator will repeat the sequence.
*/
@@ -1437,6 +1607,10 @@
}
}
+/**
+ * fc_exch_reset() - Reset an exchange
+ * @ep: The exchange to be reset
+ */
static void fc_exch_reset(struct fc_exch *ep)
{
struct fc_seq *sp;
@@ -1446,12 +1620,6 @@
spin_lock_bh(&ep->ex_lock);
ep->state |= FC_EX_RST_CLEANUP;
- /*
- * we really want to call del_timer_sync, but cannot due
- * to the lport calling with the lport lock held (some resp
- * functions can also grab the lport lock which could cause
- * a deadlock).
- */
if (cancel_delayed_work(&ep->timeout_work))
atomic_dec(&ep->ex_refcnt); /* drop hold for timer */
resp = ep->resp;
@@ -1471,16 +1639,16 @@
}
/**
- * fc_exch_pool_reset() - Resets an per cpu exches pool.
- * @lport: ptr to the local port
- * @pool: ptr to the per cpu exches pool
- * @sid: source FC ID
- * @did: destination FC ID
+ * fc_exch_pool_reset() - Reset a per cpu exchange pool
+ * @lport: The local port that the exchange pool is on
+ * @pool: The exchange pool to be reset
+ * @sid: The source ID
+ * @did: The destination ID
*
- * Resets an per cpu exches pool, releasing its all sequences
- * and exchanges. If sid is non-zero, then reset only exchanges
- * we sourced from that FID. If did is non-zero, reset only
- * exchanges destined to that FID.
+ * Resets a per cpu exches pool, releasing all of its sequences
+ * and exchanges. If sid is non-zero then reset only exchanges
+ * we sourced from the local port's FID. If did is non-zero then
+ * only reset exchanges destined for the local port's FID.
*/
static void fc_exch_pool_reset(struct fc_lport *lport,
struct fc_exch_pool *pool,
@@ -1514,15 +1682,15 @@
}
/**
- * fc_exch_mgr_reset() - Resets all EMs of a lport
- * @lport: ptr to the local port
- * @sid: source FC ID
- * @did: destination FC ID
+ * fc_exch_mgr_reset() - Reset all EMs of a local port
+ * @lport: The local port whose EMs are to be reset
+ * @sid: The source ID
+ * @did: The destination ID
*
- * Reset all EMs of a lport, releasing its all sequences and
- * exchanges. If sid is non-zero, then reset only exchanges
- * we sourced from that FID. If did is non-zero, reset only
- * exchanges destined to that FID.
+ * Reset all EMs associated with a given local port. Release all
+ * sequences and exchanges. If sid is non-zero then reset only the
+ * exchanges sent from the local port's FID. If did is non-zero then
+ * reset only exchanges destined for the local port's FID.
*/
void fc_exch_mgr_reset(struct fc_lport *lport, u32 sid, u32 did)
{
@@ -1538,8 +1706,11 @@
}
EXPORT_SYMBOL(fc_exch_mgr_reset);
-/*
- * Handle incoming ELS REC - Read Exchange Concise.
+/**
+ * fc_exch_els_rec() - Handler for ELS REC (Read Exchange Concise) requests
+ * @sp: The sequence the REC is on
+ * @rfp: The REC frame
+ *
* Note that the requesting port may be different than the S_ID in the request.
*/
static void fc_exch_els_rec(struct fc_seq *sp, struct fc_frame *rfp)
@@ -1621,10 +1792,11 @@
fc_frame_free(rfp);
}
-/*
- * Handle response from RRQ.
- * Not much to do here, really.
- * Should report errors.
+/**
+ * fc_exch_rrq_resp() - Handler for RRQ responses
+ * @sp: The sequence that the RRQ is on
+ * @fp: The RRQ frame
+ * @arg: The exchange that the RRQ is on
*
* TODO: fix error handler.
*/
@@ -1664,21 +1836,99 @@
fc_exch_release(aborted_ep);
}
-/*
- * Send ELS RRQ - Reinstate Recovery Qualifier.
+
+/**
+ * fc_exch_seq_send() - Send a frame using a new exchange and sequence
+ * @lport: The local port to send the frame on
+ * @fp: The frame to be sent
+ * @resp: The response handler for this request
+ * @destructor: The destructor for the exchange
+ * @arg: The argument to be passed to the response handler
+ * @timer_msec: The timeout period for the exchange
+ *
+ * The frame pointer with some of the header's fields must be
+ * filled before calling this routine, those fields are:
+ *
+ * - routing control
+ * - FC port did
+ * - FC port sid
+ * - FC header type
+ * - frame control
+ * - parameter or relative offset
+ */
+static struct fc_seq *fc_exch_seq_send(struct fc_lport *lport,
+ struct fc_frame *fp,
+ void (*resp)(struct fc_seq *,
+ struct fc_frame *fp,
+ void *arg),
+ void (*destructor)(struct fc_seq *,
+ void *),
+ void *arg, u32 timer_msec)
+{
+ struct fc_exch *ep;
+ struct fc_seq *sp = NULL;
+ struct fc_frame_header *fh;
+ int rc = 1;
+
+ ep = fc_exch_alloc(lport, fp);
+ if (!ep) {
+ fc_frame_free(fp);
+ return NULL;
+ }
+ ep->esb_stat |= ESB_ST_SEQ_INIT;
+ fh = fc_frame_header_get(fp);
+ fc_exch_set_addr(ep, ntoh24(fh->fh_s_id), ntoh24(fh->fh_d_id));
+ ep->resp = resp;
+ ep->destructor = destructor;
+ ep->arg = arg;
+ ep->r_a_tov = FC_DEF_R_A_TOV;
+ ep->lp = lport;
+ sp = &ep->seq;
+
+ ep->fh_type = fh->fh_type; /* save for possbile timeout handling */
+ ep->f_ctl = ntoh24(fh->fh_f_ctl);
+ fc_exch_setup_hdr(ep, fp, ep->f_ctl);
+ sp->cnt++;
+
+ if (ep->xid <= lport->lro_xid)
+ fc_fcp_ddp_setup(fr_fsp(fp), ep->xid);
+
+ if (unlikely(lport->tt.frame_send(lport, fp)))
+ goto err;
+
+ if (timer_msec)
+ fc_exch_timer_set_locked(ep, timer_msec);
+ ep->f_ctl &= ~FC_FC_FIRST_SEQ; /* not first seq */
+
+ if (ep->f_ctl & FC_FC_SEQ_INIT)
+ ep->esb_stat &= ~ESB_ST_SEQ_INIT;
+ spin_unlock_bh(&ep->ex_lock);
+ return sp;
+err:
+ rc = fc_exch_done_locked(ep);
+ spin_unlock_bh(&ep->ex_lock);
+ if (!rc)
+ fc_exch_delete(ep);
+ return NULL;
+}
+
+/**
+ * fc_exch_rrq() - Send an ELS RRQ (Reinstate Recovery Qualifier) command
+ * @ep: The exchange to send the RRQ on
+ *
* This tells the remote port to stop blocking the use of
* the exchange and the seq_cnt range.
*/
static void fc_exch_rrq(struct fc_exch *ep)
{
- struct fc_lport *lp;
+ struct fc_lport *lport;
struct fc_els_rrq *rrq;
struct fc_frame *fp;
u32 did;
- lp = ep->lp;
+ lport = ep->lp;
- fp = fc_frame_alloc(lp, sizeof(*rrq));
+ fp = fc_frame_alloc(lport, sizeof(*rrq));
if (!fp)
goto retry;
@@ -1694,10 +1944,11 @@
did = ep->sid;
fc_fill_fc_hdr(fp, FC_RCTL_ELS_REQ, did,
- fc_host_port_id(lp->host), FC_TYPE_ELS,
+ fc_host_port_id(lport->host), FC_TYPE_ELS,
FC_FC_FIRST_SEQ | FC_FC_END_SEQ | FC_FC_SEQ_INIT, 0);
- if (fc_exch_seq_send(lp, fp, fc_exch_rrq_resp, NULL, ep, lp->e_d_tov))
+ if (fc_exch_seq_send(lport, fp, fc_exch_rrq_resp, NULL, ep,
+ lport->e_d_tov))
return;
retry:
@@ -1714,12 +1965,14 @@
}
-/*
- * Handle incoming ELS RRQ - Reset Recovery Qualifier.
+/**
+ * fc_exch_els_rrq() - Handler for ELS RRQ (Reset Recovery Qualifier) requests
+ * @sp: The sequence that the RRQ is on
+ * @fp: The RRQ frame
*/
static void fc_exch_els_rrq(struct fc_seq *sp, struct fc_frame *fp)
{
- struct fc_exch *ep; /* request or subject exchange */
+ struct fc_exch *ep = NULL; /* request or subject exchange */
struct fc_els_rrq *rp;
u32 sid;
u16 xid;
@@ -1769,17 +2022,24 @@
* Send LS_ACC.
*/
fc_seq_ls_acc(sp);
- fc_frame_free(fp);
- return;
+ goto out;
unlock_reject:
spin_unlock_bh(&ep->ex_lock);
- fc_exch_release(ep); /* drop hold from fc_exch_find */
reject:
fc_seq_ls_rjt(sp, ELS_RJT_LOGIC, explan);
+out:
fc_frame_free(fp);
+ if (ep)
+ fc_exch_release(ep); /* drop hold from fc_exch_find */
}
+/**
+ * fc_exch_mgr_add() - Add an exchange manager to a local port's list of EMs
+ * @lport: The local port to add the exchange manager to
+ * @mp: The exchange manager to be added to the local port
+ * @match: The match routine that indicates when this EM should be used
+ */
struct fc_exch_mgr_anchor *fc_exch_mgr_add(struct fc_lport *lport,
struct fc_exch_mgr *mp,
bool (*match)(struct fc_frame *))
@@ -1799,6 +2059,10 @@
}
EXPORT_SYMBOL(fc_exch_mgr_add);
+/**
+ * fc_exch_mgr_destroy() - Destroy an exchange manager
+ * @kref: The reference to the EM to be destroyed
+ */
static void fc_exch_mgr_destroy(struct kref *kref)
{
struct fc_exch_mgr *mp = container_of(kref, struct fc_exch_mgr, kref);
@@ -1808,6 +2072,10 @@
kfree(mp);
}
+/**
+ * fc_exch_mgr_del() - Delete an EM from a local port's list
+ * @ema: The exchange manager anchor identifying the EM to be deleted
+ */
void fc_exch_mgr_del(struct fc_exch_mgr_anchor *ema)
{
/* remove EM anchor from EM anchors list */
@@ -1817,7 +2085,35 @@
}
EXPORT_SYMBOL(fc_exch_mgr_del);
-struct fc_exch_mgr *fc_exch_mgr_alloc(struct fc_lport *lp,
+/**
+ * fc_exch_mgr_list_clone() - Share all exchange manager objects
+ * @src: Source lport to clone exchange managers from
+ * @dst: New lport that takes references to all the exchange managers
+ */
+int fc_exch_mgr_list_clone(struct fc_lport *src, struct fc_lport *dst)
+{
+ struct fc_exch_mgr_anchor *ema, *tmp;
+
+ list_for_each_entry(ema, &src->ema_list, ema_list) {
+ if (!fc_exch_mgr_add(dst, ema->mp, ema->match))
+ goto err;
+ }
+ return 0;
+err:
+ list_for_each_entry_safe(ema, tmp, &dst->ema_list, ema_list)
+ fc_exch_mgr_del(ema);
+ return -ENOMEM;
+}
+
+/**
+ * fc_exch_mgr_alloc() - Allocate an exchange manager
+ * @lport: The local port that the new EM will be associated with
+ * @class: The default FC class for new exchanges
+ * @min_xid: The minimum XID for exchanges from the new EM
+ * @max_xid: The maximum XID for exchanges from the new EM
+ * @match: The match routine for the new EM
+ */
+struct fc_exch_mgr *fc_exch_mgr_alloc(struct fc_lport *lport,
enum fc_class class,
u16 min_xid, u16 max_xid,
bool (*match)(struct fc_frame *))
@@ -1830,7 +2126,7 @@
if (max_xid <= min_xid || max_xid == FC_XID_UNKNOWN ||
(min_xid & fc_cpu_mask) != 0) {
- FC_LPORT_DBG(lp, "Invalid min_xid 0x:%x and max_xid 0x:%x\n",
+ FC_LPORT_DBG(lport, "Invalid min_xid 0x:%x and max_xid 0x:%x\n",
min_xid, max_xid);
return NULL;
}
@@ -1873,7 +2169,7 @@
}
kref_init(&mp->kref);
- if (!fc_exch_mgr_add(lp, mp, match)) {
+ if (!fc_exch_mgr_add(lport, mp, match)) {
free_percpu(mp->pool);
goto free_mempool;
}
@@ -1894,76 +2190,26 @@
}
EXPORT_SYMBOL(fc_exch_mgr_alloc);
+/**
+ * fc_exch_mgr_free() - Free all exchange managers on a local port
+ * @lport: The local port whose EMs are to be freed
+ */
void fc_exch_mgr_free(struct fc_lport *lport)
{
struct fc_exch_mgr_anchor *ema, *next;
+ flush_workqueue(fc_exch_workqueue);
list_for_each_entry_safe(ema, next, &lport->ema_list, ema_list)
fc_exch_mgr_del(ema);
}
EXPORT_SYMBOL(fc_exch_mgr_free);
-
-struct fc_seq *fc_exch_seq_send(struct fc_lport *lp,
- struct fc_frame *fp,
- void (*resp)(struct fc_seq *,
- struct fc_frame *fp,
- void *arg),
- void (*destructor)(struct fc_seq *, void *),
- void *arg, u32 timer_msec)
-{
- struct fc_exch *ep;
- struct fc_seq *sp = NULL;
- struct fc_frame_header *fh;
- int rc = 1;
-
- ep = fc_exch_alloc(lp, fp);
- if (!ep) {
- fc_frame_free(fp);
- return NULL;
- }
- ep->esb_stat |= ESB_ST_SEQ_INIT;
- fh = fc_frame_header_get(fp);
- fc_exch_set_addr(ep, ntoh24(fh->fh_s_id), ntoh24(fh->fh_d_id));
- ep->resp = resp;
- ep->destructor = destructor;
- ep->arg = arg;
- ep->r_a_tov = FC_DEF_R_A_TOV;
- ep->lp = lp;
- sp = &ep->seq;
-
- ep->fh_type = fh->fh_type; /* save for possbile timeout handling */
- ep->f_ctl = ntoh24(fh->fh_f_ctl);
- fc_exch_setup_hdr(ep, fp, ep->f_ctl);
- sp->cnt++;
-
- if (ep->xid <= lp->lro_xid)
- fc_fcp_ddp_setup(fr_fsp(fp), ep->xid);
-
- if (unlikely(lp->tt.frame_send(lp, fp)))
- goto err;
-
- if (timer_msec)
- fc_exch_timer_set_locked(ep, timer_msec);
- ep->f_ctl &= ~FC_FC_FIRST_SEQ; /* not first seq */
-
- if (ep->f_ctl & FC_FC_SEQ_INIT)
- ep->esb_stat &= ~ESB_ST_SEQ_INIT;
- spin_unlock_bh(&ep->ex_lock);
- return sp;
-err:
- rc = fc_exch_done_locked(ep);
- spin_unlock_bh(&ep->ex_lock);
- if (!rc)
- fc_exch_delete(ep);
- return NULL;
-}
-EXPORT_SYMBOL(fc_exch_seq_send);
-
-/*
- * Receive a frame
+/**
+ * fc_exch_recv() - Handler for received frames
+ * @lport: The local port the frame was received on
+ * @fp: The received frame
*/
-void fc_exch_recv(struct fc_lport *lp, struct fc_frame *fp)
+void fc_exch_recv(struct fc_lport *lport, struct fc_frame *fp)
{
struct fc_frame_header *fh = fc_frame_header_get(fp);
struct fc_exch_mgr_anchor *ema;
@@ -1971,8 +2217,8 @@
u16 oxid;
/* lport lock ? */
- if (!lp || lp->state == LPORT_ST_DISABLED) {
- FC_LPORT_DBG(lp, "Receiving frames for an lport that "
+ if (!lport || lport->state == LPORT_ST_DISABLED) {
+ FC_LPORT_DBG(lport, "Receiving frames for an lport that "
"has not been initialized correctly\n");
fc_frame_free(fp);
return;
@@ -1981,7 +2227,7 @@
f_ctl = ntoh24(fh->fh_f_ctl);
oxid = ntohs(fh->fh_ox_id);
if (f_ctl & FC_FC_EX_CTX) {
- list_for_each_entry(ema, &lp->ema_list, ema_list) {
+ list_for_each_entry(ema, &lport->ema_list, ema_list) {
if ((oxid >= ema->mp->min_xid) &&
(oxid <= ema->mp->max_xid)) {
found = 1;
@@ -1990,13 +2236,13 @@
}
if (!found) {
- FC_LPORT_DBG(lp, "Received response for out "
+ FC_LPORT_DBG(lport, "Received response for out "
"of range oxid:%hx\n", oxid);
fc_frame_free(fp);
return;
}
} else
- ema = list_entry(lp->ema_list.prev, typeof(*ema), ema_list);
+ ema = list_entry(lport->ema_list.prev, typeof(*ema), ema_list);
/*
* If frame is marked invalid, just drop it.
@@ -2015,37 +2261,56 @@
else if (f_ctl & FC_FC_SEQ_CTX)
fc_exch_recv_resp(ema->mp, fp);
else
- fc_exch_recv_req(lp, ema->mp, fp);
+ fc_exch_recv_req(lport, ema->mp, fp);
break;
default:
- FC_LPORT_DBG(lp, "dropping invalid frame (eof %x)", fr_eof(fp));
+ FC_LPORT_DBG(lport, "dropping invalid frame (eof %x)",
+ fr_eof(fp));
fc_frame_free(fp);
}
}
EXPORT_SYMBOL(fc_exch_recv);
-int fc_exch_init(struct fc_lport *lp)
+/**
+ * fc_exch_init() - Initialize the exchange layer for a local port
+ * @lport: The local port to initialize the exchange layer for
+ */
+int fc_exch_init(struct fc_lport *lport)
{
- if (!lp->tt.seq_start_next)
- lp->tt.seq_start_next = fc_seq_start_next;
+ if (!lport->tt.seq_start_next)
+ lport->tt.seq_start_next = fc_seq_start_next;
- if (!lp->tt.exch_seq_send)
- lp->tt.exch_seq_send = fc_exch_seq_send;
+ if (!lport->tt.exch_seq_send)
+ lport->tt.exch_seq_send = fc_exch_seq_send;
- if (!lp->tt.seq_send)
- lp->tt.seq_send = fc_seq_send;
+ if (!lport->tt.seq_send)
+ lport->tt.seq_send = fc_seq_send;
- if (!lp->tt.seq_els_rsp_send)
- lp->tt.seq_els_rsp_send = fc_seq_els_rsp_send;
+ if (!lport->tt.seq_els_rsp_send)
+ lport->tt.seq_els_rsp_send = fc_seq_els_rsp_send;
- if (!lp->tt.exch_done)
- lp->tt.exch_done = fc_exch_done;
+ if (!lport->tt.exch_done)
+ lport->tt.exch_done = fc_exch_done;
- if (!lp->tt.exch_mgr_reset)
- lp->tt.exch_mgr_reset = fc_exch_mgr_reset;
+ if (!lport->tt.exch_mgr_reset)
+ lport->tt.exch_mgr_reset = fc_exch_mgr_reset;
- if (!lp->tt.seq_exch_abort)
- lp->tt.seq_exch_abort = fc_seq_exch_abort;
+ if (!lport->tt.seq_exch_abort)
+ lport->tt.seq_exch_abort = fc_seq_exch_abort;
+
+ return 0;
+}
+EXPORT_SYMBOL(fc_exch_init);
+
+/**
+ * fc_setup_exch_mgr() - Setup an exchange manager
+ */
+int fc_setup_exch_mgr()
+{
+ fc_em_cachep = kmem_cache_create("libfc_em", sizeof(struct fc_exch),
+ 0, SLAB_HWCACHE_ALIGN, NULL);
+ if (!fc_em_cachep)
+ return -ENOMEM;
/*
* Initialize fc_cpu_mask and fc_cpu_order. The
@@ -2069,20 +2334,17 @@
}
fc_cpu_mask--;
- return 0;
-}
-EXPORT_SYMBOL(fc_exch_init);
-
-int fc_setup_exch_mgr(void)
-{
- fc_em_cachep = kmem_cache_create("libfc_em", sizeof(struct fc_exch),
- 0, SLAB_HWCACHE_ALIGN, NULL);
- if (!fc_em_cachep)
+ fc_exch_workqueue = create_singlethread_workqueue("fc_exch_workqueue");
+ if (!fc_exch_workqueue)
return -ENOMEM;
return 0;
}
-void fc_destroy_exch_mgr(void)
+/**
+ * fc_destroy_exch_mgr() - Destroy an exchange manager
+ */
+void fc_destroy_exch_mgr()
{
+ destroy_workqueue(fc_exch_workqueue);
kmem_cache_destroy(fc_em_cachep);
}
diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c
index 59a4408..c4b58d0 100644
--- a/drivers/scsi/libfc/fc_fcp.c
+++ b/drivers/scsi/libfc/fc_fcp.c
@@ -39,15 +39,9 @@
#include <scsi/libfc.h>
#include <scsi/fc_encode.h>
-MODULE_AUTHOR("Open-FCoE.org");
-MODULE_DESCRIPTION("libfc");
-MODULE_LICENSE("GPL v2");
+#include "fc_libfc.h"
-unsigned int fc_debug_logging;
-module_param_named(debug_logging, fc_debug_logging, int, S_IRUGO|S_IWUSR);
-MODULE_PARM_DESC(debug_logging, "a bit mask of logging levels");
-
-static struct kmem_cache *scsi_pkt_cachep;
+struct kmem_cache *scsi_pkt_cachep;
/* SRB state definitions */
#define FC_SRB_FREE 0 /* cmd is free */
@@ -58,7 +52,6 @@
#define FC_SRB_DISCONTIG (1 << 4) /* non-sequential data recvd */
#define FC_SRB_COMPL (1 << 5) /* fc_io_compl has been run */
#define FC_SRB_FCP_PROCESSING_TMO (1 << 6) /* timer function processing */
-#define FC_SRB_NOMEM (1 << 7) /* dropped to out of mem */
#define FC_SRB_READ (1 << 1)
#define FC_SRB_WRITE (1 << 0)
@@ -73,10 +66,20 @@
#define CMD_SCSI_STATUS(Cmnd) ((Cmnd)->SCp.Status)
#define CMD_RESID_LEN(Cmnd) ((Cmnd)->SCp.buffers_residual)
+/**
+ * struct fc_fcp_internal - FCP layer internal data
+ * @scsi_pkt_pool: Memory pool to draw FCP packets from
+ * @scsi_pkt_queue: Current FCP packets
+ * @last_can_queue_ramp_down_time: ramp down time
+ * @last_can_queue_ramp_up_time: ramp up time
+ * @max_can_queue: max can_queue size
+ */
struct fc_fcp_internal {
- mempool_t *scsi_pkt_pool;
+ mempool_t *scsi_pkt_pool;
struct list_head scsi_pkt_queue;
- u8 throttled;
+ unsigned long last_can_queue_ramp_down_time;
+ unsigned long last_can_queue_ramp_up_time;
+ int max_can_queue;
};
#define fc_get_scsi_internal(x) ((struct fc_fcp_internal *)(x)->scsi_priv)
@@ -90,9 +93,9 @@
static void fc_fcp_resp(struct fc_fcp_pkt *, struct fc_frame *);
static void fc_fcp_complete_locked(struct fc_fcp_pkt *);
static void fc_tm_done(struct fc_seq *, struct fc_frame *, void *);
-static void fc_fcp_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp);
+static void fc_fcp_error(struct fc_fcp_pkt *, struct fc_frame *);
static void fc_timeout_error(struct fc_fcp_pkt *);
-static void fc_fcp_timeout(unsigned long data);
+static void fc_fcp_timeout(unsigned long);
static void fc_fcp_rec(struct fc_fcp_pkt *);
static void fc_fcp_rec_error(struct fc_fcp_pkt *, struct fc_frame *);
static void fc_fcp_rec_resp(struct fc_seq *, struct fc_frame *, void *);
@@ -124,6 +127,7 @@
#define FC_SCSI_TM_TOV (10 * HZ)
#define FC_SCSI_REC_TOV (2 * HZ)
#define FC_HOST_RESET_TIMEOUT (30 * HZ)
+#define FC_CAN_QUEUE_PERIOD (60 * HZ)
#define FC_MAX_ERROR_CNT 5
#define FC_MAX_RECOV_RETRY 3
@@ -131,23 +135,22 @@
#define FC_FCP_DFLT_QUEUE_DEPTH 32
/**
- * fc_fcp_pkt_alloc - allocation routine for scsi_pkt packet
- * @lp: fc lport struct
- * @gfp: gfp flags for allocation
+ * fc_fcp_pkt_alloc() - Allocate a fcp_pkt
+ * @lport: The local port that the FCP packet is for
+ * @gfp: GFP flags for allocation
*
- * This is used by upper layer scsi driver.
- * Return Value : scsi_pkt structure or null on allocation failure.
- * Context : call from process context. no locking required.
+ * Return value: fcp_pkt structure or null on allocation failure.
+ * Context: Can be called from process context, no lock is required.
*/
-static struct fc_fcp_pkt *fc_fcp_pkt_alloc(struct fc_lport *lp, gfp_t gfp)
+static struct fc_fcp_pkt *fc_fcp_pkt_alloc(struct fc_lport *lport, gfp_t gfp)
{
- struct fc_fcp_internal *si = fc_get_scsi_internal(lp);
+ struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
struct fc_fcp_pkt *fsp;
fsp = mempool_alloc(si->scsi_pkt_pool, gfp);
if (fsp) {
memset(fsp, 0, sizeof(*fsp));
- fsp->lp = lp;
+ fsp->lp = lport;
atomic_set(&fsp->ref_cnt, 1);
init_timer(&fsp->timer);
INIT_LIST_HEAD(&fsp->list);
@@ -157,12 +160,11 @@
}
/**
- * fc_fcp_pkt_release() - release hold on scsi_pkt packet
- * @fsp: fcp packet struct
+ * fc_fcp_pkt_release() - Release hold on a fcp_pkt
+ * @fsp: The FCP packet to be released
*
- * This is used by upper layer scsi driver.
- * Context : call from process and interrupt context.
- * no locking required
+ * Context: Can be called from process or interrupt context,
+ * no lock is required.
*/
static void fc_fcp_pkt_release(struct fc_fcp_pkt *fsp)
{
@@ -173,20 +175,25 @@
}
}
+/**
+ * fc_fcp_pkt_hold() - Hold a fcp_pkt
+ * @fsp: The FCP packet to be held
+ */
static void fc_fcp_pkt_hold(struct fc_fcp_pkt *fsp)
{
atomic_inc(&fsp->ref_cnt);
}
/**
- * fc_fcp_pkt_destory() - release hold on scsi_pkt packet
- * @seq: exchange sequence
- * @fsp: fcp packet struct
+ * fc_fcp_pkt_destory() - Release hold on a fcp_pkt
+ * @seq: The sequence that the FCP packet is on (required by destructor API)
+ * @fsp: The FCP packet to be released
*
- * Release hold on scsi_pkt packet set to keep scsi_pkt
- * till EM layer exch resource is not freed.
- * Context : called from from EM layer.
- * no locking required
+ * This routine is called by a destructor callback in the exch_seq_send()
+ * routine of the libfc Transport Template. The 'struct fc_seq' is a required
+ * argument even though it is not used by this routine.
+ *
+ * Context: No locking required.
*/
static void fc_fcp_pkt_destroy(struct fc_seq *seq, void *fsp)
{
@@ -194,10 +201,10 @@
}
/**
- * fc_fcp_lock_pkt() - lock a packet and get a ref to it.
- * @fsp: fcp packet
+ * fc_fcp_lock_pkt() - Lock a fcp_pkt and increase its reference count
+ * @fsp: The FCP packet to be locked and incremented
*
- * We should only return error if we return a command to scsi-ml before
+ * We should only return error if we return a command to SCSI-ml before
* getting a response. This can happen in cases where we send a abort, but
* do not wait for the response and the abort and command can be passing
* each other on the wire/network-layer.
@@ -222,18 +229,33 @@
return 0;
}
+/**
+ * fc_fcp_unlock_pkt() - Release a fcp_pkt's lock and decrement its
+ * reference count
+ * @fsp: The FCP packet to be unlocked and decremented
+ */
static inline void fc_fcp_unlock_pkt(struct fc_fcp_pkt *fsp)
{
spin_unlock_bh(&fsp->scsi_pkt_lock);
fc_fcp_pkt_release(fsp);
}
+/**
+ * fc_fcp_timer_set() - Start a timer for a fcp_pkt
+ * @fsp: The FCP packet to start a timer for
+ * @delay: The timeout period for the timer
+ */
static void fc_fcp_timer_set(struct fc_fcp_pkt *fsp, unsigned long delay)
{
if (!(fsp->state & FC_SRB_COMPL))
mod_timer(&fsp->timer, jiffies + delay);
}
+/**
+ * fc_fcp_send_abort() - Send an abort for exchanges associated with a
+ * fcp_pkt
+ * @fsp: The FCP packet to abort exchanges on
+ */
static int fc_fcp_send_abort(struct fc_fcp_pkt *fsp)
{
if (!fsp->seq_ptr)
@@ -243,9 +265,14 @@
return fsp->lp->tt.seq_exch_abort(fsp->seq_ptr, 0);
}
-/*
- * Retry command.
- * An abort isn't needed.
+/**
+ * fc_fcp_retry_cmd() - Retry a fcp_pkt
+ * @fsp: The FCP packet to be retried
+ *
+ * Sets the status code to be FC_ERROR and then calls
+ * fc_fcp_complete_locked() which in turn calls fc_io_compl().
+ * fc_io_compl() will notify the SCSI-ml that the I/O is done.
+ * The SCSI-ml will retry the command.
*/
static void fc_fcp_retry_cmd(struct fc_fcp_pkt *fsp)
{
@@ -260,64 +287,146 @@
fc_fcp_complete_locked(fsp);
}
-/*
- * fc_fcp_ddp_setup - calls to LLD's ddp_setup to set up DDP
- * transfer for a read I/O indicated by the fc_fcp_pkt.
- * @fsp: ptr to the fc_fcp_pkt
- *
- * This is called in exch_seq_send() when we have a newly allocated
- * exchange with a valid exchange id to setup ddp.
- *
- * returns: none
+/**
+ * fc_fcp_ddp_setup() - Calls a LLD's ddp_setup routine to set up DDP context
+ * @fsp: The FCP packet that will manage the DDP frames
+ * @xid: The XID that will be used for the DDP exchange
*/
void fc_fcp_ddp_setup(struct fc_fcp_pkt *fsp, u16 xid)
{
- struct fc_lport *lp;
+ struct fc_lport *lport;
if (!fsp)
return;
- lp = fsp->lp;
+ lport = fsp->lp;
if ((fsp->req_flags & FC_SRB_READ) &&
- (lp->lro_enabled) && (lp->tt.ddp_setup)) {
- if (lp->tt.ddp_setup(lp, xid, scsi_sglist(fsp->cmd),
- scsi_sg_count(fsp->cmd)))
+ (lport->lro_enabled) && (lport->tt.ddp_setup)) {
+ if (lport->tt.ddp_setup(lport, xid, scsi_sglist(fsp->cmd),
+ scsi_sg_count(fsp->cmd)))
fsp->xfer_ddp = xid;
}
}
-EXPORT_SYMBOL(fc_fcp_ddp_setup);
-/*
- * fc_fcp_ddp_done - calls to LLD's ddp_done to release any
- * DDP related resources for this I/O if it is initialized
- * as a ddp transfer
- * @fsp: ptr to the fc_fcp_pkt
- *
- * returns: none
+/**
+ * fc_fcp_ddp_done() - Calls a LLD's ddp_done routine to release any
+ * DDP related resources for a fcp_pkt
+ * @fsp: The FCP packet that DDP had been used on
*/
static void fc_fcp_ddp_done(struct fc_fcp_pkt *fsp)
{
- struct fc_lport *lp;
+ struct fc_lport *lport;
if (!fsp)
return;
- lp = fsp->lp;
- if (fsp->xfer_ddp && lp->tt.ddp_done) {
- fsp->xfer_len = lp->tt.ddp_done(lp, fsp->xfer_ddp);
- fsp->xfer_ddp = 0;
+ if (fsp->xfer_ddp == FC_XID_UNKNOWN)
+ return;
+
+ lport = fsp->lp;
+ if (lport->tt.ddp_done) {
+ fsp->xfer_len = lport->tt.ddp_done(lport, fsp->xfer_ddp);
+ fsp->xfer_ddp = FC_XID_UNKNOWN;
}
}
+/**
+ * fc_fcp_can_queue_ramp_up() - increases can_queue
+ * @lport: lport to ramp up can_queue
+ *
+ * Locking notes: Called with Scsi_Host lock held
+ */
+static void fc_fcp_can_queue_ramp_up(struct fc_lport *lport)
+{
+ struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
+ int can_queue;
+
+ if (si->last_can_queue_ramp_up_time &&
+ (time_before(jiffies, si->last_can_queue_ramp_up_time +
+ FC_CAN_QUEUE_PERIOD)))
+ return;
+
+ if (time_before(jiffies, si->last_can_queue_ramp_down_time +
+ FC_CAN_QUEUE_PERIOD))
+ return;
+
+ si->last_can_queue_ramp_up_time = jiffies;
+
+ can_queue = lport->host->can_queue << 1;
+ if (can_queue >= si->max_can_queue) {
+ can_queue = si->max_can_queue;
+ si->last_can_queue_ramp_down_time = 0;
+ }
+ lport->host->can_queue = can_queue;
+ shost_printk(KERN_ERR, lport->host, "libfc: increased "
+ "can_queue to %d.\n", can_queue);
+}
+
+/**
+ * fc_fcp_can_queue_ramp_down() - reduces can_queue
+ * @lport: lport to reduce can_queue
+ *
+ * If we are getting memory allocation failures, then we may
+ * be trying to execute too many commands. We let the running
+ * commands complete or timeout, then try again with a reduced
+ * can_queue. Eventually we will hit the point where we run
+ * on all reserved structs.
+ *
+ * Locking notes: Called with Scsi_Host lock held
+ */
+static void fc_fcp_can_queue_ramp_down(struct fc_lport *lport)
+{
+ struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
+ int can_queue;
+
+ if (si->last_can_queue_ramp_down_time &&
+ (time_before(jiffies, si->last_can_queue_ramp_down_time +
+ FC_CAN_QUEUE_PERIOD)))
+ return;
+
+ si->last_can_queue_ramp_down_time = jiffies;
+
+ can_queue = lport->host->can_queue;
+ can_queue >>= 1;
+ if (!can_queue)
+ can_queue = 1;
+ lport->host->can_queue = can_queue;
+ shost_printk(KERN_ERR, lport->host, "libfc: Could not allocate frame.\n"
+ "Reducing can_queue to %d.\n", can_queue);
+}
/*
- * Receive SCSI data from target.
- * Called after receiving solicited data.
+ * fc_fcp_frame_alloc() - Allocates fc_frame structure and buffer.
+ * @lport: fc lport struct
+ * @len: payload length
+ *
+ * Allocates fc_frame structure and buffer but if fails to allocate
+ * then reduce can_queue.
+ */
+static inline struct fc_frame *fc_fcp_frame_alloc(struct fc_lport *lport,
+ size_t len)
+{
+ struct fc_frame *fp;
+ unsigned long flags;
+
+ fp = fc_frame_alloc(lport, len);
+ if (!fp) {
+ spin_lock_irqsave(lport->host->host_lock, flags);
+ fc_fcp_can_queue_ramp_down(lport);
+ spin_unlock_irqrestore(lport->host->host_lock, flags);
+ }
+ return fp;
+}
+
+/**
+ * fc_fcp_recv_data() - Handler for receiving SCSI-FCP data from a target
+ * @fsp: The FCP packet the data is on
+ * @fp: The data frame
*/
static void fc_fcp_recv_data(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
{
struct scsi_cmnd *sc = fsp->cmd;
- struct fc_lport *lp = fsp->lp;
+ struct fc_lport *lport = fsp->lp;
struct fcoe_dev_stats *stats;
struct fc_frame_header *fh;
size_t start_offset;
@@ -327,7 +436,7 @@
size_t len;
void *buf;
struct scatterlist *sg;
- size_t remaining;
+ u32 nents;
fh = fc_frame_header_get(fp);
offset = ntohl(fh->fh_parm_offset);
@@ -351,65 +460,29 @@
if (offset != fsp->xfer_len)
fsp->state |= FC_SRB_DISCONTIG;
- crc = 0;
- if (fr_flags(fp) & FCPHF_CRC_UNCHECKED)
- crc = crc32(~0, (u8 *) fh, sizeof(*fh));
-
sg = scsi_sglist(sc);
- remaining = len;
+ nents = scsi_sg_count(sc);
- while (remaining > 0 && sg) {
- size_t off;
- void *page_addr;
- size_t sg_bytes;
-
- if (offset >= sg->length) {
- offset -= sg->length;
- sg = sg_next(sg);
- continue;
- }
- sg_bytes = min(remaining, sg->length - offset);
-
- /*
- * The scatterlist item may be bigger than PAGE_SIZE,
- * but we are limited to mapping PAGE_SIZE at a time.
- */
- off = offset + sg->offset;
- sg_bytes = min(sg_bytes, (size_t)
- (PAGE_SIZE - (off & ~PAGE_MASK)));
- page_addr = kmap_atomic(sg_page(sg) + (off >> PAGE_SHIFT),
- KM_SOFTIRQ0);
- if (!page_addr)
- break; /* XXX panic? */
-
- if (fr_flags(fp) & FCPHF_CRC_UNCHECKED)
- crc = crc32(crc, buf, sg_bytes);
- memcpy((char *)page_addr + (off & ~PAGE_MASK), buf,
- sg_bytes);
-
- kunmap_atomic(page_addr, KM_SOFTIRQ0);
- buf += sg_bytes;
- offset += sg_bytes;
- remaining -= sg_bytes;
- copy_len += sg_bytes;
- }
-
- if (fr_flags(fp) & FCPHF_CRC_UNCHECKED) {
+ if (!(fr_flags(fp) & FCPHF_CRC_UNCHECKED)) {
+ copy_len = fc_copy_buffer_to_sglist(buf, len, sg, &nents,
+ &offset, KM_SOFTIRQ0, NULL);
+ } else {
+ crc = crc32(~0, (u8 *) fh, sizeof(*fh));
+ copy_len = fc_copy_buffer_to_sglist(buf, len, sg, &nents,
+ &offset, KM_SOFTIRQ0, &crc);
buf = fc_frame_payload_get(fp, 0);
- if (len % 4) {
+ if (len % 4)
crc = crc32(crc, buf + len, 4 - (len % 4));
- len += 4 - (len % 4);
- }
if (~crc != le32_to_cpu(fr_crc(fp))) {
crc_err:
- stats = fc_lport_get_stats(lp);
+ stats = fc_lport_get_stats(lport);
stats->ErrorFrames++;
/* FIXME - per cpu count, not total count! */
if (stats->InvalidCRCCount++ < 5)
printk(KERN_WARNING "libfc: CRC error on data "
"frame for port (%6x)\n",
- fc_host_port_id(lp->host));
+ fc_host_port_id(lport->host));
/*
* Assume the frame is total garbage.
* We may have copied it over the good part
@@ -437,18 +510,17 @@
}
/**
- * fc_fcp_send_data() - Send SCSI data to target.
- * @fsp: ptr to fc_fcp_pkt
- * @sp: ptr to this sequence
- * @offset: starting offset for this data request
- * @seq_blen: the burst length for this data request
+ * fc_fcp_send_data() - Send SCSI data to a target
+ * @fsp: The FCP packet the data is on
+ * @sp: The sequence the data is to be sent on
+ * @offset: The starting offset for this data request
+ * @seq_blen: The burst length for this data request
*
* Called after receiving a Transfer Ready data descriptor.
- * if LLD is capable of seq offload then send down seq_blen
- * size of data in single frame, otherwise send multiple FC
- * frames of max FC frame payload supported by target port.
- *
- * Returns : 0 for success.
+ * If the LLD is capable of sequence offload then send down the
+ * seq_blen ammount of data in single frame, otherwise send
+ * multiple frames of the maximum frame payload supported by
+ * the target port.
*/
static int fc_fcp_send_data(struct fc_fcp_pkt *fsp, struct fc_seq *seq,
size_t offset, size_t seq_blen)
@@ -457,16 +529,18 @@
struct scsi_cmnd *sc;
struct scatterlist *sg;
struct fc_frame *fp = NULL;
- struct fc_lport *lp = fsp->lp;
+ struct fc_lport *lport = fsp->lp;
+ struct page *page;
size_t remaining;
size_t t_blen;
size_t tlen;
size_t sg_bytes;
size_t frame_offset, fh_parm_offset;
+ size_t off;
int error;
void *data = NULL;
void *page_addr;
- int using_sg = lp->sg_supp;
+ int using_sg = lport->sg_supp;
u32 f_ctl;
WARN_ON(seq_blen <= 0);
@@ -488,10 +562,10 @@
* to max FC frame payload previously set in fsp->max_payload.
*/
t_blen = fsp->max_payload;
- if (lp->seq_offload) {
- t_blen = min(seq_blen, (size_t)lp->lso_max);
+ if (lport->seq_offload) {
+ t_blen = min(seq_blen, (size_t)lport->lso_max);
FC_FCP_DBG(fsp, "fsp=%p:lso:blen=%zx lso_max=0x%x t_blen=%zx\n",
- fsp, seq_blen, lp->lso_max, t_blen);
+ fsp, seq_blen, lport->lso_max, t_blen);
}
WARN_ON(t_blen < FC_MIN_MAX_PAYLOAD);
@@ -503,7 +577,7 @@
remaining = seq_blen;
fh_parm_offset = frame_offset = offset;
tlen = 0;
- seq = lp->tt.seq_start_next(seq);
+ seq = lport->tt.seq_start_next(seq);
f_ctl = FC_FC_REL_OFF;
WARN_ON(!seq);
@@ -525,43 +599,34 @@
*/
if (tlen % 4)
using_sg = 0;
- if (using_sg) {
- fp = _fc_frame_alloc(lp, 0);
- if (!fp)
- return -ENOMEM;
- } else {
- fp = fc_frame_alloc(lp, tlen);
- if (!fp)
- return -ENOMEM;
+ fp = fc_frame_alloc(lport, using_sg ? 0 : tlen);
+ if (!fp)
+ return -ENOMEM;
- data = (void *)(fr_hdr(fp)) +
- sizeof(struct fc_frame_header);
- }
+ data = fc_frame_header_get(fp) + 1;
fh_parm_offset = frame_offset;
fr_max_payload(fp) = fsp->max_payload;
}
+
+ off = offset + sg->offset;
sg_bytes = min(tlen, sg->length - offset);
+ sg_bytes = min(sg_bytes,
+ (size_t) (PAGE_SIZE - (off & ~PAGE_MASK)));
+ page = sg_page(sg) + (off >> PAGE_SHIFT);
if (using_sg) {
- get_page(sg_page(sg));
+ get_page(page);
skb_fill_page_desc(fp_skb(fp),
skb_shinfo(fp_skb(fp))->nr_frags,
- sg_page(sg), sg->offset + offset,
- sg_bytes);
+ page, off & ~PAGE_MASK, sg_bytes);
fp_skb(fp)->data_len += sg_bytes;
fr_len(fp) += sg_bytes;
fp_skb(fp)->truesize += PAGE_SIZE;
} else {
- size_t off = offset + sg->offset;
-
/*
* The scatterlist item may be bigger than PAGE_SIZE,
* but we must not cross pages inside the kmap.
*/
- sg_bytes = min(sg_bytes, (size_t) (PAGE_SIZE -
- (off & ~PAGE_MASK)));
- page_addr = kmap_atomic(sg_page(sg) +
- (off >> PAGE_SHIFT),
- KM_SOFTIRQ0);
+ page_addr = kmap_atomic(page, KM_SOFTIRQ0);
memcpy(data, (char *)page_addr + (off & ~PAGE_MASK),
sg_bytes);
kunmap_atomic(page_addr, KM_SOFTIRQ0);
@@ -572,7 +637,8 @@
tlen -= sg_bytes;
remaining -= sg_bytes;
- if (tlen)
+ if ((skb_shinfo(fp_skb(fp))->nr_frags < FC_FRAME_SG_LEN) &&
+ (tlen))
continue;
/*
@@ -589,7 +655,7 @@
/*
* send fragment using for a sequence.
*/
- error = lp->tt.seq_send(lp, seq, fp);
+ error = lport->tt.seq_send(lport, seq, fp);
if (error) {
WARN_ON(1); /* send error should be rare */
fc_fcp_retry_cmd(fsp);
@@ -601,6 +667,11 @@
return 0;
}
+/**
+ * fc_fcp_abts_resp() - Send an ABTS response
+ * @fsp: The FCP packet that is being aborted
+ * @fp: The response frame
+ */
static void fc_fcp_abts_resp(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
{
int ba_done = 1;
@@ -637,46 +708,13 @@
}
/**
- * fc_fcp_reduce_can_queue() - drop can_queue
- * @lp: lport to drop queueing for
- *
- * If we are getting memory allocation failures, then we may
- * be trying to execute too many commands. We let the running
- * commands complete or timeout, then try again with a reduced
- * can_queue. Eventually we will hit the point where we run
- * on all reserved structs.
- */
-static void fc_fcp_reduce_can_queue(struct fc_lport *lp)
-{
- struct fc_fcp_internal *si = fc_get_scsi_internal(lp);
- unsigned long flags;
- int can_queue;
-
- spin_lock_irqsave(lp->host->host_lock, flags);
- if (si->throttled)
- goto done;
- si->throttled = 1;
-
- can_queue = lp->host->can_queue;
- can_queue >>= 1;
- if (!can_queue)
- can_queue = 1;
- lp->host->can_queue = can_queue;
- shost_printk(KERN_ERR, lp->host, "libfc: Could not allocate frame.\n"
- "Reducing can_queue to %d.\n", can_queue);
-done:
- spin_unlock_irqrestore(lp->host->host_lock, flags);
-}
-
-/**
- * fc_fcp_recv() - Reveive FCP frames
+ * fc_fcp_recv() - Reveive an FCP frame
* @seq: The sequence the frame is on
- * @fp: The FC frame
+ * @fp: The received frame
* @arg: The related FCP packet
*
- * Return : None
- * Context : called from Soft IRQ context
- * can not called holding list lock
+ * Context: Called from Soft IRQ context. Can not be called
+ * holding the FCP packet list lock.
*/
static void fc_fcp_recv(struct fc_seq *seq, struct fc_frame *fp, void *arg)
{
@@ -687,8 +725,10 @@
u8 r_ctl;
int rc = 0;
- if (IS_ERR(fp))
- goto errout;
+ if (IS_ERR(fp)) {
+ fc_fcp_error(fsp, fp);
+ return;
+ }
fh = fc_frame_header_get(fp);
r_ctl = fh->fh_r_ctl;
@@ -721,8 +761,6 @@
(size_t) ntohl(dd->ft_burst_len));
if (!rc)
seq->rec_data = fsp->xfer_len;
- else if (rc == -ENOMEM)
- fsp->state |= FC_SRB_NOMEM;
} else if (r_ctl == FC_RCTL_DD_SOL_DATA) {
/*
* received a DATA frame
@@ -742,13 +780,13 @@
fc_fcp_unlock_pkt(fsp);
out:
fc_frame_free(fp);
-errout:
- if (IS_ERR(fp))
- fc_fcp_error(fsp, fp);
- else if (rc == -ENOMEM)
- fc_fcp_reduce_can_queue(lport);
}
+/**
+ * fc_fcp_resp() - Handler for FCP responses
+ * @fsp: The FCP packet the response is for
+ * @fp: The response frame
+ */
static void fc_fcp_resp(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
{
struct fc_frame_header *fh;
@@ -862,15 +900,16 @@
}
/**
- * fc_fcp_complete_locked() - complete processing of a fcp packet
- * @fsp: fcp packet
+ * fc_fcp_complete_locked() - Complete processing of a fcp_pkt with the
+ * fcp_pkt lock held
+ * @fsp: The FCP packet to be completed
*
* This function may sleep if a timer is pending. The packet lock must be
* held, and the host lock must not be held.
*/
static void fc_fcp_complete_locked(struct fc_fcp_pkt *fsp)
{
- struct fc_lport *lp = fsp->lp;
+ struct fc_lport *lport = fsp->lp;
struct fc_seq *seq;
struct fc_exch *ep;
u32 f_ctl;
@@ -901,8 +940,8 @@
struct fc_frame *conf_frame;
struct fc_seq *csp;
- csp = lp->tt.seq_start_next(seq);
- conf_frame = fc_frame_alloc(fsp->lp, 0);
+ csp = lport->tt.seq_start_next(seq);
+ conf_frame = fc_fcp_frame_alloc(fsp->lp, 0);
if (conf_frame) {
f_ctl = FC_FC_SEQ_INIT;
f_ctl |= FC_FC_LAST_SEQ | FC_FC_END_SEQ;
@@ -910,43 +949,48 @@
fc_fill_fc_hdr(conf_frame, FC_RCTL_DD_SOL_CTL,
ep->did, ep->sid,
FC_TYPE_FCP, f_ctl, 0);
- lp->tt.seq_send(lp, csp, conf_frame);
+ lport->tt.seq_send(lport, csp, conf_frame);
}
}
- lp->tt.exch_done(seq);
+ lport->tt.exch_done(seq);
}
fc_io_compl(fsp);
}
+/**
+ * fc_fcp_cleanup_cmd() - Cancel the active exchange on a fcp_pkt
+ * @fsp: The FCP packet whose exchanges should be canceled
+ * @error: The reason for the cancellation
+ */
static void fc_fcp_cleanup_cmd(struct fc_fcp_pkt *fsp, int error)
{
- struct fc_lport *lp = fsp->lp;
+ struct fc_lport *lport = fsp->lp;
if (fsp->seq_ptr) {
- lp->tt.exch_done(fsp->seq_ptr);
+ lport->tt.exch_done(fsp->seq_ptr);
fsp->seq_ptr = NULL;
}
fsp->status_code = error;
}
/**
- * fc_fcp_cleanup_each_cmd() - Cleanup active commads
- * @lp: logical port
- * @id: target id
- * @lun: lun
- * @error: fsp status code
+ * fc_fcp_cleanup_each_cmd() - Cancel all exchanges on a local port
+ * @lport: The local port whose exchanges should be canceled
+ * @id: The target's ID
+ * @lun: The LUN
+ * @error: The reason for cancellation
*
* If lun or id is -1, they are ignored.
*/
-static void fc_fcp_cleanup_each_cmd(struct fc_lport *lp, unsigned int id,
+static void fc_fcp_cleanup_each_cmd(struct fc_lport *lport, unsigned int id,
unsigned int lun, int error)
{
- struct fc_fcp_internal *si = fc_get_scsi_internal(lp);
+ struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
struct fc_fcp_pkt *fsp;
struct scsi_cmnd *sc_cmd;
unsigned long flags;
- spin_lock_irqsave(lp->host->host_lock, flags);
+ spin_lock_irqsave(lport->host->host_lock, flags);
restart:
list_for_each_entry(fsp, &si->scsi_pkt_queue, list) {
sc_cmd = fsp->cmd;
@@ -957,7 +1001,7 @@
continue;
fc_fcp_pkt_hold(fsp);
- spin_unlock_irqrestore(lp->host->host_lock, flags);
+ spin_unlock_irqrestore(lport->host->host_lock, flags);
if (!fc_fcp_lock_pkt(fsp)) {
fc_fcp_cleanup_cmd(fsp, error);
@@ -966,35 +1010,36 @@
}
fc_fcp_pkt_release(fsp);
- spin_lock_irqsave(lp->host->host_lock, flags);
+ spin_lock_irqsave(lport->host->host_lock, flags);
/*
* while we dropped the lock multiple pkts could
* have been released, so we have to start over.
*/
goto restart;
}
- spin_unlock_irqrestore(lp->host->host_lock, flags);
-}
-
-static void fc_fcp_abort_io(struct fc_lport *lp)
-{
- fc_fcp_cleanup_each_cmd(lp, -1, -1, FC_HRD_ERROR);
+ spin_unlock_irqrestore(lport->host->host_lock, flags);
}
/**
- * fc_fcp_pkt_send() - send a fcp packet to the lower level.
- * @lp: fc lport
- * @fsp: fc packet.
- *
- * This is called by upper layer protocol.
- * Return : zero for success and -1 for failure
- * Context : called from queuecommand which can be called from process
- * or scsi soft irq.
- * Locks : called with the host lock and irqs disabled.
+ * fc_fcp_abort_io() - Abort all FCP-SCSI exchanges on a local port
+ * @lport: The local port whose exchanges are to be aborted
*/
-static int fc_fcp_pkt_send(struct fc_lport *lp, struct fc_fcp_pkt *fsp)
+static void fc_fcp_abort_io(struct fc_lport *lport)
{
- struct fc_fcp_internal *si = fc_get_scsi_internal(lp);
+ fc_fcp_cleanup_each_cmd(lport, -1, -1, FC_HRD_ERROR);
+}
+
+/**
+ * fc_fcp_pkt_send() - Send a fcp_pkt
+ * @lport: The local port to send the FCP packet on
+ * @fsp: The FCP packet to send
+ *
+ * Return: Zero for success and -1 for failure
+ * Locks: Called with the host lock and irqs disabled.
+ */
+static int fc_fcp_pkt_send(struct fc_lport *lport, struct fc_fcp_pkt *fsp)
+{
+ struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
int rc;
fsp->cmd->SCp.ptr = (char *)fsp;
@@ -1006,16 +1051,22 @@
memcpy(fsp->cdb_cmd.fc_cdb, fsp->cmd->cmnd, fsp->cmd->cmd_len);
list_add_tail(&fsp->list, &si->scsi_pkt_queue);
- spin_unlock_irq(lp->host->host_lock);
- rc = lp->tt.fcp_cmd_send(lp, fsp, fc_fcp_recv);
- spin_lock_irq(lp->host->host_lock);
+ spin_unlock_irq(lport->host->host_lock);
+ rc = lport->tt.fcp_cmd_send(lport, fsp, fc_fcp_recv);
+ spin_lock_irq(lport->host->host_lock);
if (rc)
list_del(&fsp->list);
return rc;
}
-static int fc_fcp_cmd_send(struct fc_lport *lp, struct fc_fcp_pkt *fsp,
+/**
+ * fc_fcp_cmd_send() - Send a FCP command
+ * @lport: The local port to send the command on
+ * @fsp: The FCP packet the command is on
+ * @resp: The handler for the response
+ */
+static int fc_fcp_cmd_send(struct fc_lport *lport, struct fc_fcp_pkt *fsp,
void (*resp)(struct fc_seq *,
struct fc_frame *fp,
void *arg))
@@ -1023,14 +1074,14 @@
struct fc_frame *fp;
struct fc_seq *seq;
struct fc_rport *rport;
- struct fc_rport_libfc_priv *rp;
+ struct fc_rport_libfc_priv *rpriv;
const size_t len = sizeof(fsp->cdb_cmd);
int rc = 0;
if (fc_fcp_lock_pkt(fsp))
return 0;
- fp = fc_frame_alloc(lp, sizeof(fsp->cdb_cmd));
+ fp = fc_fcp_frame_alloc(lport, sizeof(fsp->cdb_cmd));
if (!fp) {
rc = -1;
goto unlock;
@@ -1040,15 +1091,15 @@
fr_fsp(fp) = fsp;
rport = fsp->rport;
fsp->max_payload = rport->maxframe_size;
- rp = rport->dd_data;
+ rpriv = rport->dd_data;
fc_fill_fc_hdr(fp, FC_RCTL_DD_UNSOL_CMD, rport->port_id,
- fc_host_port_id(rp->local_port->host), FC_TYPE_FCP,
+ fc_host_port_id(rpriv->local_port->host), FC_TYPE_FCP,
FC_FC_FIRST_SEQ | FC_FC_END_SEQ | FC_FC_SEQ_INIT, 0);
- seq = lp->tt.exch_seq_send(lp, fp, resp, fc_fcp_pkt_destroy, fsp, 0);
+ seq = lport->tt.exch_seq_send(lport, fp, resp, fc_fcp_pkt_destroy,
+ fsp, 0);
if (!seq) {
- fc_frame_free(fp);
rc = -1;
goto unlock;
}
@@ -1065,8 +1116,10 @@
return rc;
}
-/*
- * transport error handler
+/**
+ * fc_fcp_error() - Handler for FCP layer errors
+ * @fsp: The FCP packet the error is on
+ * @fp: The frame that has errored
*/
static void fc_fcp_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
{
@@ -1091,11 +1144,13 @@
fc_fcp_unlock_pkt(fsp);
}
-/*
- * Scsi abort handler- calls to send an abort
- * and then wait for abort completion
+/**
+ * fc_fcp_pkt_abort() - Abort a fcp_pkt
+ * @fsp: The FCP packet to abort on
+ *
+ * Called to send an abort and then wait for abort completion
*/
-static int fc_fcp_pkt_abort(struct fc_lport *lp, struct fc_fcp_pkt *fsp)
+static int fc_fcp_pkt_abort(struct fc_fcp_pkt *fsp)
{
int rc = FAILED;
@@ -1122,14 +1177,15 @@
return rc;
}
-/*
- * Retry LUN reset after resource allocation failed.
+/**
+ * fc_lun_reset_send() - Send LUN reset command
+ * @data: The FCP packet that identifies the LUN to be reset
*/
static void fc_lun_reset_send(unsigned long data)
{
struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)data;
- struct fc_lport *lp = fsp->lp;
- if (lp->tt.fcp_cmd_send(lp, fsp, fc_tm_done)) {
+ struct fc_lport *lport = fsp->lp;
+ if (lport->tt.fcp_cmd_send(lport, fsp, fc_tm_done)) {
if (fsp->recov_retry++ >= FC_MAX_RECOV_RETRY)
return;
if (fc_fcp_lock_pkt(fsp))
@@ -1140,11 +1196,15 @@
}
}
-/*
- * Scsi device reset handler- send a LUN RESET to the device
- * and wait for reset reply
+/**
+ * fc_lun_reset() - Send a LUN RESET command to a device
+ * and wait for the reply
+ * @lport: The local port to sent the comand on
+ * @fsp: The FCP packet that identifies the LUN to be reset
+ * @id: The SCSI command ID
+ * @lun: The LUN ID to be reset
*/
-static int fc_lun_reset(struct fc_lport *lp, struct fc_fcp_pkt *fsp,
+static int fc_lun_reset(struct fc_lport *lport, struct fc_fcp_pkt *fsp,
unsigned int id, unsigned int lun)
{
int rc;
@@ -1172,14 +1232,14 @@
spin_lock_bh(&fsp->scsi_pkt_lock);
if (fsp->seq_ptr) {
- lp->tt.exch_done(fsp->seq_ptr);
+ lport->tt.exch_done(fsp->seq_ptr);
fsp->seq_ptr = NULL;
}
fsp->wait_for_comp = 0;
spin_unlock_bh(&fsp->scsi_pkt_lock);
if (!rc) {
- FC_SCSI_DBG(lp, "lun reset failed\n");
+ FC_SCSI_DBG(lport, "lun reset failed\n");
return FAILED;
}
@@ -1187,13 +1247,16 @@
if (fsp->cdb_status != FCP_TMF_CMPL)
return FAILED;
- FC_SCSI_DBG(lp, "lun reset to lun %u completed\n", lun);
- fc_fcp_cleanup_each_cmd(lp, id, lun, FC_CMD_ABORTED);
+ FC_SCSI_DBG(lport, "lun reset to lun %u completed\n", lun);
+ fc_fcp_cleanup_each_cmd(lport, id, lun, FC_CMD_ABORTED);
return SUCCESS;
}
-/*
- * Task Managment response handler
+/**
+ * fc_tm_done() - Task Managment response handler
+ * @seq: The sequence that the response is on
+ * @fp: The response frame
+ * @arg: The FCP packet the response is for
*/
static void fc_tm_done(struct fc_seq *seq, struct fc_frame *fp, void *arg)
{
@@ -1230,34 +1293,31 @@
fc_fcp_unlock_pkt(fsp);
}
-static void fc_fcp_cleanup(struct fc_lport *lp)
+/**
+ * fc_fcp_cleanup() - Cleanup all FCP exchanges on a local port
+ * @lport: The local port to be cleaned up
+ */
+static void fc_fcp_cleanup(struct fc_lport *lport)
{
- fc_fcp_cleanup_each_cmd(lp, -1, -1, FC_ERROR);
+ fc_fcp_cleanup_each_cmd(lport, -1, -1, FC_ERROR);
}
-/*
- * fc_fcp_timeout: called by OS timer function.
+/**
+ * fc_fcp_timeout() - Handler for fcp_pkt timeouts
+ * @data: The FCP packet that has timed out
*
- * The timer has been inactivated and must be reactivated if desired
- * using fc_fcp_timer_set().
- *
- * Algorithm:
- *
- * If REC is supported, just issue it, and return. The REC exchange will
- * complete or time out, and recovery can continue at that point.
- *
- * Otherwise, if the response has been received without all the data,
- * it has been ER_TIMEOUT since the response was received.
- *
- * If the response has not been received,
- * we see if data was received recently. If it has been, we continue waiting,
- * otherwise, we abort the command.
+ * If REC is supported then just issue it and return. The REC exchange will
+ * complete or time out and recovery can continue at that point. Otherwise,
+ * if the response has been received without all the data it has been
+ * ER_TIMEOUT since the response was received. If the response has not been
+ * received we see if data was received recently. If it has been then we
+ * continue waiting, otherwise, we abort the command.
*/
static void fc_fcp_timeout(unsigned long data)
{
struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)data;
struct fc_rport *rport = fsp->rport;
- struct fc_rport_libfc_priv *rp = rport->dd_data;
+ struct fc_rport_libfc_priv *rpriv = rport->dd_data;
if (fc_fcp_lock_pkt(fsp))
return;
@@ -1267,7 +1327,7 @@
fsp->state |= FC_SRB_FCP_PROCESSING_TMO;
- if (rp->flags & FC_RP_FLAGS_REC_SUPPORTED)
+ if (rpriv->flags & FC_RP_FLAGS_REC_SUPPORTED)
fc_fcp_rec(fsp);
else if (time_after_eq(fsp->last_pkt_time + (FC_SCSI_ER_TIMEOUT / 2),
jiffies))
@@ -1281,39 +1341,40 @@
fc_fcp_unlock_pkt(fsp);
}
-/*
- * Send a REC ELS request
+/**
+ * fc_fcp_rec() - Send a REC ELS request
+ * @fsp: The FCP packet to send the REC request on
*/
static void fc_fcp_rec(struct fc_fcp_pkt *fsp)
{
- struct fc_lport *lp;
+ struct fc_lport *lport;
struct fc_frame *fp;
struct fc_rport *rport;
- struct fc_rport_libfc_priv *rp;
+ struct fc_rport_libfc_priv *rpriv;
- lp = fsp->lp;
+ lport = fsp->lp;
rport = fsp->rport;
- rp = rport->dd_data;
- if (!fsp->seq_ptr || rp->rp_state != RPORT_ST_READY) {
+ rpriv = rport->dd_data;
+ if (!fsp->seq_ptr || rpriv->rp_state != RPORT_ST_READY) {
fsp->status_code = FC_HRD_ERROR;
fsp->io_status = 0;
fc_fcp_complete_locked(fsp);
return;
}
- fp = fc_frame_alloc(lp, sizeof(struct fc_els_rec));
+ fp = fc_fcp_frame_alloc(lport, sizeof(struct fc_els_rec));
if (!fp)
goto retry;
fr_seq(fp) = fsp->seq_ptr;
fc_fill_fc_hdr(fp, FC_RCTL_ELS_REQ, rport->port_id,
- fc_host_port_id(rp->local_port->host), FC_TYPE_ELS,
+ fc_host_port_id(rpriv->local_port->host), FC_TYPE_ELS,
FC_FC_FIRST_SEQ | FC_FC_END_SEQ | FC_FC_SEQ_INIT, 0);
- if (lp->tt.elsct_send(lp, rport->port_id, fp, ELS_REC, fc_fcp_rec_resp,
- fsp, jiffies_to_msecs(FC_SCSI_REC_TOV))) {
+ if (lport->tt.elsct_send(lport, rport->port_id, fp, ELS_REC,
+ fc_fcp_rec_resp, fsp,
+ jiffies_to_msecs(FC_SCSI_REC_TOV))) {
fc_fcp_pkt_hold(fsp); /* hold while REC outstanding */
return;
}
- fc_frame_free(fp);
retry:
if (fsp->recov_retry++ < FC_MAX_RECOV_RETRY)
fc_fcp_timer_set(fsp, FC_SCSI_REC_TOV);
@@ -1321,12 +1382,16 @@
fc_timeout_error(fsp);
}
-/*
- * Receive handler for REC ELS frame
- * if it is a reject then let the scsi layer to handle
- * the timeout. if it is a LS_ACC then if the io was not completed
- * then set the timeout and return otherwise complete the exchange
- * and tell the scsi layer to restart the I/O.
+/**
+ * fc_fcp_rec_resp() - Handler for REC ELS responses
+ * @seq: The sequence the response is on
+ * @fp: The response frame
+ * @arg: The FCP packet the response is on
+ *
+ * If the response is a reject then the scsi layer will handle
+ * the timeout. If the response is a LS_ACC then if the I/O was not completed
+ * set the timeout and return. If the I/O was completed then complete the
+ * exchange and tell the SCSI layer.
*/
static void fc_fcp_rec_resp(struct fc_seq *seq, struct fc_frame *fp, void *arg)
{
@@ -1338,7 +1403,7 @@
u32 offset;
enum dma_data_direction data_dir;
enum fc_rctl r_ctl;
- struct fc_rport_libfc_priv *rp;
+ struct fc_rport_libfc_priv *rpriv;
if (IS_ERR(fp)) {
fc_fcp_rec_error(fsp, fp);
@@ -1361,13 +1426,13 @@
/* fall through */
case ELS_RJT_UNSUP:
FC_FCP_DBG(fsp, "device does not support REC\n");
- rp = fsp->rport->dd_data;
+ rpriv = fsp->rport->dd_data;
/*
* if we do not spport RECs or got some bogus
* reason then resetup timer so we check for
* making progress.
*/
- rp->flags &= ~FC_RP_FLAGS_REC_SUPPORTED;
+ rpriv->flags &= ~FC_RP_FLAGS_REC_SUPPORTED;
fc_fcp_timer_set(fsp, FC_SCSI_ER_TIMEOUT);
break;
case ELS_RJT_LOGIC:
@@ -1464,8 +1529,10 @@
fc_frame_free(fp);
}
-/*
- * Handle error response or timeout for REC exchange.
+/**
+ * fc_fcp_rec_error() - Handler for REC errors
+ * @fsp: The FCP packet the error is on
+ * @fp: The REC frame
*/
static void fc_fcp_rec_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
{
@@ -1504,10 +1571,9 @@
fc_fcp_pkt_release(fsp); /* drop hold for outstanding REC */
}
-/*
- * Time out error routine:
- * abort's the I/O close the exchange and
- * send completion notification to scsi layer
+/**
+ * fc_timeout_error() - Handler for fcp_pkt timeouts
+ * @fsp: The FCP packt that has timed out
*/
static void fc_timeout_error(struct fc_fcp_pkt *fsp)
{
@@ -1521,16 +1587,18 @@
fc_fcp_send_abort(fsp);
}
-/*
- * Sequence retransmission request.
+/**
+ * fc_fcp_srr() - Send a SRR request (Sequence Retransmission Request)
+ * @fsp: The FCP packet the SRR is to be sent on
+ * @r_ctl: The R_CTL field for the SRR request
* This is called after receiving status but insufficient data, or
* when expecting status but the request has timed out.
*/
static void fc_fcp_srr(struct fc_fcp_pkt *fsp, enum fc_rctl r_ctl, u32 offset)
{
- struct fc_lport *lp = fsp->lp;
+ struct fc_lport *lport = fsp->lp;
struct fc_rport *rport;
- struct fc_rport_libfc_priv *rp;
+ struct fc_rport_libfc_priv *rpriv;
struct fc_exch *ep = fc_seq_exch(fsp->seq_ptr);
struct fc_seq *seq;
struct fcp_srr *srr;
@@ -1538,12 +1606,13 @@
u8 cdb_op;
rport = fsp->rport;
- rp = rport->dd_data;
+ rpriv = rport->dd_data;
cdb_op = fsp->cdb_cmd.fc_cdb[0];
- if (!(rp->flags & FC_RP_FLAGS_RETRY) || rp->rp_state != RPORT_ST_READY)
+ if (!(rpriv->flags & FC_RP_FLAGS_RETRY) ||
+ rpriv->rp_state != RPORT_ST_READY)
goto retry; /* shouldn't happen */
- fp = fc_frame_alloc(lp, sizeof(*srr));
+ fp = fc_fcp_frame_alloc(lport, sizeof(*srr));
if (!fp)
goto retry;
@@ -1556,15 +1625,14 @@
srr->srr_rel_off = htonl(offset);
fc_fill_fc_hdr(fp, FC_RCTL_ELS4_REQ, rport->port_id,
- fc_host_port_id(rp->local_port->host), FC_TYPE_FCP,
+ fc_host_port_id(rpriv->local_port->host), FC_TYPE_FCP,
FC_FC_FIRST_SEQ | FC_FC_END_SEQ | FC_FC_SEQ_INIT, 0);
- seq = lp->tt.exch_seq_send(lp, fp, fc_fcp_srr_resp, NULL,
- fsp, jiffies_to_msecs(FC_SCSI_REC_TOV));
- if (!seq) {
- fc_frame_free(fp);
+ seq = lport->tt.exch_seq_send(lport, fp, fc_fcp_srr_resp, NULL,
+ fsp, jiffies_to_msecs(FC_SCSI_REC_TOV));
+ if (!seq)
goto retry;
- }
+
fsp->recov_seq = seq;
fsp->xfer_len = offset;
fsp->xfer_contig_end = offset;
@@ -1575,8 +1643,11 @@
fc_fcp_retry_cmd(fsp);
}
-/*
- * Handle response from SRR.
+/**
+ * fc_fcp_srr_resp() - Handler for SRR response
+ * @seq: The sequence the SRR is on
+ * @fp: The SRR frame
+ * @arg: The FCP packet the SRR is on
*/
static void fc_fcp_srr_resp(struct fc_seq *seq, struct fc_frame *fp, void *arg)
{
@@ -1622,6 +1693,11 @@
fc_fcp_pkt_release(fsp); /* drop hold for outstanding SRR */
}
+/**
+ * fc_fcp_srr_error() - Handler for SRR errors
+ * @fsp: The FCP packet that the SRR error is on
+ * @fp: The SRR frame
+ */
static void fc_fcp_srr_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
{
if (fc_fcp_lock_pkt(fsp))
@@ -1646,31 +1722,36 @@
fc_fcp_pkt_release(fsp); /* drop hold for outstanding SRR */
}
-static inline int fc_fcp_lport_queue_ready(struct fc_lport *lp)
+/**
+ * fc_fcp_lport_queue_ready() - Determine if the lport and it's queue is ready
+ * @lport: The local port to be checked
+ */
+static inline int fc_fcp_lport_queue_ready(struct fc_lport *lport)
{
/* lock ? */
- return (lp->state == LPORT_ST_READY) && lp->link_up && !lp->qfull;
+ return (lport->state == LPORT_ST_READY) &&
+ lport->link_up && !lport->qfull;
}
/**
- * fc_queuecommand - The queuecommand function of the scsi template
- * @cmd: struct scsi_cmnd to be executed
- * @done: Callback function to be called when cmd is completed
+ * fc_queuecommand() - The queuecommand function of the SCSI template
+ * @cmd: The scsi_cmnd to be executed
+ * @done: The callback function to be called when the scsi_cmnd is complete
*
- * this is the i/o strategy routine, called by the scsi layer
- * this routine is called with holding the host_lock.
+ * This is the i/o strategy routine, called by the SCSI layer. This routine
+ * is called with the host_lock held.
*/
int fc_queuecommand(struct scsi_cmnd *sc_cmd, void (*done)(struct scsi_cmnd *))
{
- struct fc_lport *lp;
+ struct fc_lport *lport;
struct fc_rport *rport = starget_to_rport(scsi_target(sc_cmd->device));
struct fc_fcp_pkt *fsp;
- struct fc_rport_libfc_priv *rp;
+ struct fc_rport_libfc_priv *rpriv;
int rval;
int rc = 0;
struct fcoe_dev_stats *stats;
- lp = shost_priv(sc_cmd->device->host);
+ lport = shost_priv(sc_cmd->device->host);
rval = fc_remote_port_chkready(rport);
if (rval) {
@@ -1689,14 +1770,16 @@
goto out;
}
- rp = rport->dd_data;
+ rpriv = rport->dd_data;
- if (!fc_fcp_lport_queue_ready(lp)) {
+ if (!fc_fcp_lport_queue_ready(lport)) {
+ if (lport->qfull)
+ fc_fcp_can_queue_ramp_down(lport);
rc = SCSI_MLQUEUE_HOST_BUSY;
goto out;
}
- fsp = fc_fcp_pkt_alloc(lp, GFP_ATOMIC);
+ fsp = fc_fcp_pkt_alloc(lport, GFP_ATOMIC);
if (fsp == NULL) {
rc = SCSI_MLQUEUE_HOST_BUSY;
goto out;
@@ -1706,8 +1789,9 @@
* build the libfc request pkt
*/
fsp->cmd = sc_cmd; /* save the cmd */
- fsp->lp = lp; /* save the softc ptr */
+ fsp->lp = lport; /* save the softc ptr */
fsp->rport = rport; /* set the remote port ptr */
+ fsp->xfer_ddp = FC_XID_UNKNOWN;
sc_cmd->scsi_done = done;
/*
@@ -1719,7 +1803,7 @@
/*
* setup the data direction
*/
- stats = fc_lport_get_stats(lp);
+ stats = fc_lport_get_stats(lport);
if (sc_cmd->sc_data_direction == DMA_FROM_DEVICE) {
fsp->req_flags = FC_SRB_READ;
stats->InputRequests++;
@@ -1733,7 +1817,7 @@
stats->ControlRequests++;
}
- fsp->tgt_flags = rp->flags;
+ fsp->tgt_flags = rpriv->flags;
init_timer(&fsp->timer);
fsp->timer.data = (unsigned long)fsp;
@@ -1743,7 +1827,7 @@
* if we get -1 return then put the request in the pending
* queue.
*/
- rval = fc_fcp_pkt_send(lp, fsp);
+ rval = fc_fcp_pkt_send(lport, fsp);
if (rval != 0) {
fsp->state = FC_SRB_FREE;
fc_fcp_pkt_release(fsp);
@@ -1755,18 +1839,17 @@
EXPORT_SYMBOL(fc_queuecommand);
/**
- * fc_io_compl() - Handle responses for completed commands
- * @fsp: scsi packet
+ * fc_io_compl() - Handle responses for completed commands
+ * @fsp: The FCP packet that is complete
*
- * Translates a error to a Linux SCSI error.
- *
+ * Translates fcp_pkt errors to a Linux SCSI errors.
* The fcp packet lock must be held when calling.
*/
static void fc_io_compl(struct fc_fcp_pkt *fsp)
{
struct fc_fcp_internal *si;
struct scsi_cmnd *sc_cmd;
- struct fc_lport *lp;
+ struct fc_lport *lport;
unsigned long flags;
/* release outstanding ddp context */
@@ -1779,28 +1862,26 @@
spin_lock_bh(&fsp->scsi_pkt_lock);
}
- lp = fsp->lp;
- si = fc_get_scsi_internal(lp);
- spin_lock_irqsave(lp->host->host_lock, flags);
+ lport = fsp->lp;
+ si = fc_get_scsi_internal(lport);
+ spin_lock_irqsave(lport->host->host_lock, flags);
if (!fsp->cmd) {
- spin_unlock_irqrestore(lp->host->host_lock, flags);
+ spin_unlock_irqrestore(lport->host->host_lock, flags);
return;
}
/*
- * if a command timed out while we had to try and throttle IO
- * and it is now getting cleaned up, then we are about to
- * try again so clear the throttled flag incase we get more
- * time outs.
+ * if can_queue ramp down is done then try can_queue ramp up
+ * since commands are completing now.
*/
- if (si->throttled && fsp->state & FC_SRB_NOMEM)
- si->throttled = 0;
+ if (si->last_can_queue_ramp_down_time)
+ fc_fcp_can_queue_ramp_up(lport);
sc_cmd = fsp->cmd;
fsp->cmd = NULL;
if (!sc_cmd->SCp.ptr) {
- spin_unlock_irqrestore(lp->host->host_lock, flags);
+ spin_unlock_irqrestore(lport->host->host_lock, flags);
return;
}
@@ -1814,21 +1895,6 @@
sc_cmd->result = DID_OK << 16;
if (fsp->scsi_resid)
CMD_RESID_LEN(sc_cmd) = fsp->scsi_resid;
- } else if (fsp->cdb_status == QUEUE_FULL) {
- struct scsi_device *tmp_sdev;
- struct scsi_device *sdev = sc_cmd->device;
-
- shost_for_each_device(tmp_sdev, sdev->host) {
- if (tmp_sdev->id != sdev->id)
- continue;
-
- if (tmp_sdev->queue_depth > 1) {
- scsi_track_queue_full(tmp_sdev,
- tmp_sdev->
- queue_depth - 1);
- }
- }
- sc_cmd->result = (DID_OK << 16) | fsp->cdb_status;
} else {
/*
* transport level I/O was ok but scsi
@@ -1846,7 +1912,8 @@
* scsi status is good but transport level
* underrun.
*/
- sc_cmd->result = DID_OK << 16;
+ sc_cmd->result = (fsp->state & FC_SRB_RCV_STATUS ?
+ DID_OK : DID_ERROR) << 16;
} else {
/*
* scsi got underrun, this is an error
@@ -1881,60 +1948,42 @@
list_del(&fsp->list);
sc_cmd->SCp.ptr = NULL;
sc_cmd->scsi_done(sc_cmd);
- spin_unlock_irqrestore(lp->host->host_lock, flags);
+ spin_unlock_irqrestore(lport->host->host_lock, flags);
/* release ref from initial allocation in queue command */
fc_fcp_pkt_release(fsp);
}
/**
- * fc_fcp_complete() - complete processing of a fcp packet
- * @fsp: fcp packet
- *
- * This function may sleep if a fsp timer is pending.
- * The host lock must not be held by caller.
- */
-void fc_fcp_complete(struct fc_fcp_pkt *fsp)
-{
- if (fc_fcp_lock_pkt(fsp))
- return;
-
- fc_fcp_complete_locked(fsp);
- fc_fcp_unlock_pkt(fsp);
-}
-EXPORT_SYMBOL(fc_fcp_complete);
-
-/**
* fc_eh_abort() - Abort a command
- * @sc_cmd: scsi command to abort
+ * @sc_cmd: The SCSI command to abort
*
- * From scsi host template.
- * send ABTS to the target device and wait for the response
- * sc_cmd is the pointer to the command to be aborted.
+ * From SCSI host template.
+ * Send an ABTS to the target device and wait for the response.
*/
int fc_eh_abort(struct scsi_cmnd *sc_cmd)
{
struct fc_fcp_pkt *fsp;
- struct fc_lport *lp;
+ struct fc_lport *lport;
int rc = FAILED;
unsigned long flags;
- lp = shost_priv(sc_cmd->device->host);
- if (lp->state != LPORT_ST_READY)
+ lport = shost_priv(sc_cmd->device->host);
+ if (lport->state != LPORT_ST_READY)
return rc;
- else if (!lp->link_up)
+ else if (!lport->link_up)
return rc;
- spin_lock_irqsave(lp->host->host_lock, flags);
+ spin_lock_irqsave(lport->host->host_lock, flags);
fsp = CMD_SP(sc_cmd);
if (!fsp) {
/* command completed while scsi eh was setting up */
- spin_unlock_irqrestore(lp->host->host_lock, flags);
+ spin_unlock_irqrestore(lport->host->host_lock, flags);
return SUCCESS;
}
/* grab a ref so the fsp and sc_cmd cannot be relased from under us */
fc_fcp_pkt_hold(fsp);
- spin_unlock_irqrestore(lp->host->host_lock, flags);
+ spin_unlock_irqrestore(lport->host->host_lock, flags);
if (fc_fcp_lock_pkt(fsp)) {
/* completed while we were waiting for timer to be deleted */
@@ -1942,7 +1991,7 @@
goto release_pkt;
}
- rc = fc_fcp_pkt_abort(lp, fsp);
+ rc = fc_fcp_pkt_abort(fsp);
fc_fcp_unlock_pkt(fsp);
release_pkt:
@@ -1952,37 +2001,34 @@
EXPORT_SYMBOL(fc_eh_abort);
/**
- * fc_eh_device_reset() Reset a single LUN
- * @sc_cmd: scsi command
+ * fc_eh_device_reset() - Reset a single LUN
+ * @sc_cmd: The SCSI command which identifies the device whose
+ * LUN is to be reset
*
- * Set from scsi host template to send tm cmd to the target and wait for the
- * response.
+ * Set from SCSI host template.
*/
int fc_eh_device_reset(struct scsi_cmnd *sc_cmd)
{
- struct fc_lport *lp;
+ struct fc_lport *lport;
struct fc_fcp_pkt *fsp;
struct fc_rport *rport = starget_to_rport(scsi_target(sc_cmd->device));
int rc = FAILED;
- struct fc_rport_libfc_priv *rp;
int rval;
rval = fc_remote_port_chkready(rport);
if (rval)
goto out;
- rp = rport->dd_data;
- lp = shost_priv(sc_cmd->device->host);
+ lport = shost_priv(sc_cmd->device->host);
- if (lp->state != LPORT_ST_READY)
+ if (lport->state != LPORT_ST_READY)
return rc;
- FC_SCSI_DBG(lp, "Resetting rport (%6x)\n", rport->port_id);
+ FC_SCSI_DBG(lport, "Resetting rport (%6x)\n", rport->port_id);
- fsp = fc_fcp_pkt_alloc(lp, GFP_NOIO);
+ fsp = fc_fcp_pkt_alloc(lport, GFP_NOIO);
if (fsp == NULL) {
printk(KERN_WARNING "libfc: could not allocate scsi_pkt\n");
- sc_cmd->result = DID_NO_CONNECT << 16;
goto out;
}
@@ -1991,13 +2037,13 @@
* the sc passed in is not setup for execution like when sent
* through the queuecommand callout.
*/
- fsp->lp = lp; /* save the softc ptr */
+ fsp->lp = lport; /* save the softc ptr */
fsp->rport = rport; /* set the remote port ptr */
/*
* flush outstanding commands
*/
- rc = fc_lun_reset(lp, fsp, scmd_id(sc_cmd), sc_cmd->device->lun);
+ rc = fc_lun_reset(lport, fsp, scmd_id(sc_cmd), sc_cmd->device->lun);
fsp->state = FC_SRB_FREE;
fc_fcp_pkt_release(fsp);
@@ -2007,38 +2053,39 @@
EXPORT_SYMBOL(fc_eh_device_reset);
/**
- * fc_eh_host_reset() - The reset function will reset the ports on the host.
- * @sc_cmd: scsi command
+ * fc_eh_host_reset() - Reset a Scsi_Host.
+ * @sc_cmd: The SCSI command that identifies the SCSI host to be reset
*/
int fc_eh_host_reset(struct scsi_cmnd *sc_cmd)
{
struct Scsi_Host *shost = sc_cmd->device->host;
- struct fc_lport *lp = shost_priv(shost);
+ struct fc_lport *lport = shost_priv(shost);
unsigned long wait_tmo;
- FC_SCSI_DBG(lp, "Resetting host\n");
+ FC_SCSI_DBG(lport, "Resetting host\n");
- lp->tt.lport_reset(lp);
+ lport->tt.lport_reset(lport);
wait_tmo = jiffies + FC_HOST_RESET_TIMEOUT;
- while (!fc_fcp_lport_queue_ready(lp) && time_before(jiffies, wait_tmo))
+ while (!fc_fcp_lport_queue_ready(lport) && time_before(jiffies,
+ wait_tmo))
msleep(1000);
- if (fc_fcp_lport_queue_ready(lp)) {
+ if (fc_fcp_lport_queue_ready(lport)) {
shost_printk(KERN_INFO, shost, "libfc: Host reset succeeded "
- "on port (%6x)\n", fc_host_port_id(lp->host));
+ "on port (%6x)\n", fc_host_port_id(lport->host));
return SUCCESS;
} else {
shost_printk(KERN_INFO, shost, "libfc: Host reset failed, "
"port (%6x) is not ready.\n",
- fc_host_port_id(lp->host));
+ fc_host_port_id(lport->host));
return FAILED;
}
}
EXPORT_SYMBOL(fc_eh_host_reset);
/**
- * fc_slave_alloc() - configure queue depth
- * @sdev: scsi device
+ * fc_slave_alloc() - Configure the queue depth of a Scsi_Host
+ * @sdev: The SCSI device that identifies the SCSI host
*
* Configures queue depth based on host's cmd_per_len. If not set
* then we use the libfc default.
@@ -2046,29 +2093,50 @@
int fc_slave_alloc(struct scsi_device *sdev)
{
struct fc_rport *rport = starget_to_rport(scsi_target(sdev));
- int queue_depth;
if (!rport || fc_remote_port_chkready(rport))
return -ENXIO;
- if (sdev->tagged_supported) {
- if (sdev->host->hostt->cmd_per_lun)
- queue_depth = sdev->host->hostt->cmd_per_lun;
- else
- queue_depth = FC_FCP_DFLT_QUEUE_DEPTH;
- scsi_activate_tcq(sdev, queue_depth);
- }
+ if (sdev->tagged_supported)
+ scsi_activate_tcq(sdev, FC_FCP_DFLT_QUEUE_DEPTH);
+ else
+ scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev),
+ FC_FCP_DFLT_QUEUE_DEPTH);
+
return 0;
}
EXPORT_SYMBOL(fc_slave_alloc);
-int fc_change_queue_depth(struct scsi_device *sdev, int qdepth)
+/**
+ * fc_change_queue_depth() - Change a device's queue depth
+ * @sdev: The SCSI device whose queue depth is to change
+ * @qdepth: The new queue depth
+ * @reason: The resason for the change
+ */
+int fc_change_queue_depth(struct scsi_device *sdev, int qdepth, int reason)
{
- scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), qdepth);
+ switch (reason) {
+ case SCSI_QDEPTH_DEFAULT:
+ scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), qdepth);
+ break;
+ case SCSI_QDEPTH_QFULL:
+ scsi_track_queue_full(sdev, qdepth);
+ break;
+ case SCSI_QDEPTH_RAMP_UP:
+ scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), qdepth);
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
return sdev->queue_depth;
}
EXPORT_SYMBOL(fc_change_queue_depth);
+/**
+ * fc_change_queue_type() - Change a device's queue type
+ * @sdev: The SCSI device whose queue depth is to change
+ * @tag_type: Identifier for queue type
+ */
int fc_change_queue_type(struct scsi_device *sdev, int tag_type)
{
if (sdev->tagged_supported) {
@@ -2084,38 +2152,69 @@
}
EXPORT_SYMBOL(fc_change_queue_type);
-void fc_fcp_destroy(struct fc_lport *lp)
+/**
+ * fc_fcp_destory() - Tear down the FCP layer for a given local port
+ * @lport: The local port that no longer needs the FCP layer
+ */
+void fc_fcp_destroy(struct fc_lport *lport)
{
- struct fc_fcp_internal *si = fc_get_scsi_internal(lp);
+ struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
if (!list_empty(&si->scsi_pkt_queue))
printk(KERN_ERR "libfc: Leaked SCSI packets when destroying "
- "port (%6x)\n", fc_host_port_id(lp->host));
+ "port (%6x)\n", fc_host_port_id(lport->host));
mempool_destroy(si->scsi_pkt_pool);
kfree(si);
- lp->scsi_priv = NULL;
+ lport->scsi_priv = NULL;
}
EXPORT_SYMBOL(fc_fcp_destroy);
-int fc_fcp_init(struct fc_lport *lp)
+int fc_setup_fcp()
+{
+ int rc = 0;
+
+ scsi_pkt_cachep = kmem_cache_create("libfc_fcp_pkt",
+ sizeof(struct fc_fcp_pkt),
+ 0, SLAB_HWCACHE_ALIGN, NULL);
+ if (!scsi_pkt_cachep) {
+ printk(KERN_ERR "libfc: Unable to allocate SRB cache, "
+ "module load failed!");
+ rc = -ENOMEM;
+ }
+
+ return rc;
+}
+
+void fc_destroy_fcp()
+{
+ if (scsi_pkt_cachep)
+ kmem_cache_destroy(scsi_pkt_cachep);
+}
+
+/**
+ * fc_fcp_init() - Initialize the FCP layer for a local port
+ * @lport: The local port to initialize the exchange layer for
+ */
+int fc_fcp_init(struct fc_lport *lport)
{
int rc;
struct fc_fcp_internal *si;
- if (!lp->tt.fcp_cmd_send)
- lp->tt.fcp_cmd_send = fc_fcp_cmd_send;
+ if (!lport->tt.fcp_cmd_send)
+ lport->tt.fcp_cmd_send = fc_fcp_cmd_send;
- if (!lp->tt.fcp_cleanup)
- lp->tt.fcp_cleanup = fc_fcp_cleanup;
+ if (!lport->tt.fcp_cleanup)
+ lport->tt.fcp_cleanup = fc_fcp_cleanup;
- if (!lp->tt.fcp_abort_io)
- lp->tt.fcp_abort_io = fc_fcp_abort_io;
+ if (!lport->tt.fcp_abort_io)
+ lport->tt.fcp_abort_io = fc_fcp_abort_io;
si = kzalloc(sizeof(struct fc_fcp_internal), GFP_KERNEL);
if (!si)
return -ENOMEM;
- lp->scsi_priv = si;
+ lport->scsi_priv = si;
+ si->max_can_queue = lport->host->can_queue;
INIT_LIST_HEAD(&si->scsi_pkt_queue);
si->scsi_pkt_pool = mempool_create_slab_pool(2, scsi_pkt_cachep);
@@ -2130,42 +2229,3 @@
return rc;
}
EXPORT_SYMBOL(fc_fcp_init);
-
-static int __init libfc_init(void)
-{
- int rc;
-
- scsi_pkt_cachep = kmem_cache_create("libfc_fcp_pkt",
- sizeof(struct fc_fcp_pkt),
- 0, SLAB_HWCACHE_ALIGN, NULL);
- if (scsi_pkt_cachep == NULL) {
- printk(KERN_ERR "libfc: Unable to allocate SRB cache, "
- "module load failed!");
- return -ENOMEM;
- }
-
- rc = fc_setup_exch_mgr();
- if (rc)
- goto destroy_pkt_cache;
-
- rc = fc_setup_rport();
- if (rc)
- goto destroy_em;
-
- return rc;
-destroy_em:
- fc_destroy_exch_mgr();
-destroy_pkt_cache:
- kmem_cache_destroy(scsi_pkt_cachep);
- return rc;
-}
-
-static void __exit libfc_exit(void)
-{
- kmem_cache_destroy(scsi_pkt_cachep);
- fc_destroy_exch_mgr();
- fc_destroy_rport();
-}
-
-module_init(libfc_init);
-module_exit(libfc_exit);
diff --git a/drivers/scsi/libfc/fc_frame.c b/drivers/scsi/libfc/fc_frame.c
index 63fe00c..6da01c6 100644
--- a/drivers/scsi/libfc/fc_frame.c
+++ b/drivers/scsi/libfc/fc_frame.c
@@ -51,24 +51,24 @@
* Allocate a frame intended to be sent via fcoe_xmit.
* Get an sk_buff for the frame and set the length.
*/
-struct fc_frame *__fc_frame_alloc(size_t len)
+struct fc_frame *_fc_frame_alloc(size_t len)
{
struct fc_frame *fp;
struct sk_buff *skb;
WARN_ON((len % sizeof(u32)) != 0);
len += sizeof(struct fc_frame_header);
- skb = dev_alloc_skb(len + FC_FRAME_HEADROOM + FC_FRAME_TAILROOM);
+ skb = alloc_skb_fclone(len + FC_FRAME_HEADROOM + FC_FRAME_TAILROOM +
+ NET_SKB_PAD, GFP_ATOMIC);
if (!skb)
return NULL;
+ skb_reserve(skb, NET_SKB_PAD + FC_FRAME_HEADROOM);
fp = (struct fc_frame *) skb;
fc_frame_init(fp);
- skb_reserve(skb, FC_FRAME_HEADROOM);
skb_put(skb, len);
return fp;
}
-EXPORT_SYMBOL(__fc_frame_alloc);
-
+EXPORT_SYMBOL(_fc_frame_alloc);
struct fc_frame *fc_frame_alloc_fill(struct fc_lport *lp, size_t payload_len)
{
@@ -78,7 +78,7 @@
fill = payload_len % 4;
if (fill != 0)
fill = 4 - fill;
- fp = __fc_frame_alloc(payload_len + fill);
+ fp = _fc_frame_alloc(payload_len + fill);
if (fp) {
memset((char *) fr_hdr(fp) + payload_len, 0, fill);
/* trim is OK, we just allocated it so there are no fragments */
@@ -87,3 +87,4 @@
}
return fp;
}
+EXPORT_SYMBOL(fc_frame_alloc_fill);
diff --git a/drivers/scsi/libfc/fc_libfc.c b/drivers/scsi/libfc/fc_libfc.c
new file mode 100644
index 0000000..39f4b6a
--- /dev/null
+++ b/drivers/scsi/libfc/fc_libfc.c
@@ -0,0 +1,134 @@
+/*
+ * Copyright(c) 2009 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Maintained at www.Open-FCoE.org
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/scatterlist.h>
+#include <linux/crc32.h>
+
+#include <scsi/libfc.h>
+
+#include "fc_libfc.h"
+
+MODULE_AUTHOR("Open-FCoE.org");
+MODULE_DESCRIPTION("libfc");
+MODULE_LICENSE("GPL v2");
+
+unsigned int fc_debug_logging;
+module_param_named(debug_logging, fc_debug_logging, int, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(debug_logging, "a bit mask of logging levels");
+
+/**
+ * libfc_init() - Initialize libfc.ko
+ */
+static int __init libfc_init(void)
+{
+ int rc = 0;
+
+ rc = fc_setup_fcp();
+ if (rc)
+ return rc;
+
+ rc = fc_setup_exch_mgr();
+ if (rc)
+ goto destroy_pkt_cache;
+
+ rc = fc_setup_rport();
+ if (rc)
+ goto destroy_em;
+
+ return rc;
+destroy_em:
+ fc_destroy_exch_mgr();
+destroy_pkt_cache:
+ fc_destroy_fcp();
+ return rc;
+}
+module_init(libfc_init);
+
+/**
+ * libfc_exit() - Tear down libfc.ko
+ */
+static void __exit libfc_exit(void)
+{
+ fc_destroy_fcp();
+ fc_destroy_exch_mgr();
+ fc_destroy_rport();
+}
+module_exit(libfc_exit);
+
+/**
+ * fc_copy_buffer_to_sglist() - This routine copies the data of a buffer
+ * into a scatter-gather list (SG list).
+ *
+ * @buf: pointer to the data buffer.
+ * @len: the byte-length of the data buffer.
+ * @sg: pointer to the pointer of the SG list.
+ * @nents: pointer to the remaining number of entries in the SG list.
+ * @offset: pointer to the current offset in the SG list.
+ * @km_type: dedicated page table slot type for kmap_atomic.
+ * @crc: pointer to the 32-bit crc value.
+ * If crc is NULL, CRC is not calculated.
+ */
+u32 fc_copy_buffer_to_sglist(void *buf, size_t len,
+ struct scatterlist *sg,
+ u32 *nents, size_t *offset,
+ enum km_type km_type, u32 *crc)
+{
+ size_t remaining = len;
+ u32 copy_len = 0;
+
+ while (remaining > 0 && sg) {
+ size_t off, sg_bytes;
+ void *page_addr;
+
+ if (*offset >= sg->length) {
+ /*
+ * Check for end and drop resources
+ * from the last iteration.
+ */
+ if (!(*nents))
+ break;
+ --(*nents);
+ *offset -= sg->length;
+ sg = sg_next(sg);
+ continue;
+ }
+ sg_bytes = min(remaining, sg->length - *offset);
+
+ /*
+ * The scatterlist item may be bigger than PAGE_SIZE,
+ * but we are limited to mapping PAGE_SIZE at a time.
+ */
+ off = *offset + sg->offset;
+ sg_bytes = min(sg_bytes,
+ (size_t)(PAGE_SIZE - (off & ~PAGE_MASK)));
+ page_addr = kmap_atomic(sg_page(sg) + (off >> PAGE_SHIFT),
+ km_type);
+ if (crc)
+ *crc = crc32(*crc, buf, sg_bytes);
+ memcpy((char *)page_addr + (off & ~PAGE_MASK), buf, sg_bytes);
+ kunmap_atomic(page_addr, km_type);
+ buf += sg_bytes;
+ *offset += sg_bytes;
+ remaining -= sg_bytes;
+ copy_len += sg_bytes;
+ }
+ return copy_len;
+}
diff --git a/drivers/scsi/libfc/fc_libfc.h b/drivers/scsi/libfc/fc_libfc.h
new file mode 100644
index 0000000..741fd5c
--- /dev/null
+++ b/drivers/scsi/libfc/fc_libfc.h
@@ -0,0 +1,112 @@
+/*
+ * Copyright(c) 2009 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Maintained at www.Open-FCoE.org
+ */
+
+#ifndef _FC_LIBFC_H_
+#define _FC_LIBFC_H_
+
+#define FC_LIBFC_LOGGING 0x01 /* General logging, not categorized */
+#define FC_LPORT_LOGGING 0x02 /* lport layer logging */
+#define FC_DISC_LOGGING 0x04 /* discovery layer logging */
+#define FC_RPORT_LOGGING 0x08 /* rport layer logging */
+#define FC_FCP_LOGGING 0x10 /* I/O path logging */
+#define FC_EM_LOGGING 0x20 /* Exchange Manager logging */
+#define FC_EXCH_LOGGING 0x40 /* Exchange/Sequence logging */
+#define FC_SCSI_LOGGING 0x80 /* SCSI logging (mostly error handling) */
+
+extern unsigned int fc_debug_logging;
+
+#define FC_CHECK_LOGGING(LEVEL, CMD) \
+ do { \
+ if (unlikely(fc_debug_logging & LEVEL)) \
+ do { \
+ CMD; \
+ } while (0); \
+ } while (0)
+
+#define FC_LIBFC_DBG(fmt, args...) \
+ FC_CHECK_LOGGING(FC_LIBFC_LOGGING, \
+ printk(KERN_INFO "libfc: " fmt, ##args))
+
+#define FC_LPORT_DBG(lport, fmt, args...) \
+ FC_CHECK_LOGGING(FC_LPORT_LOGGING, \
+ printk(KERN_INFO "host%u: lport %6x: " fmt, \
+ (lport)->host->host_no, \
+ fc_host_port_id((lport)->host), ##args))
+
+#define FC_DISC_DBG(disc, fmt, args...) \
+ FC_CHECK_LOGGING(FC_DISC_LOGGING, \
+ printk(KERN_INFO "host%u: disc: " fmt, \
+ (disc)->lport->host->host_no, \
+ ##args))
+
+#define FC_RPORT_ID_DBG(lport, port_id, fmt, args...) \
+ FC_CHECK_LOGGING(FC_RPORT_LOGGING, \
+ printk(KERN_INFO "host%u: rport %6x: " fmt, \
+ (lport)->host->host_no, \
+ (port_id), ##args))
+
+#define FC_RPORT_DBG(rdata, fmt, args...) \
+ FC_RPORT_ID_DBG((rdata)->local_port, (rdata)->ids.port_id, fmt, ##args)
+
+#define FC_FCP_DBG(pkt, fmt, args...) \
+ FC_CHECK_LOGGING(FC_FCP_LOGGING, \
+ printk(KERN_INFO "host%u: fcp: %6x: " fmt, \
+ (pkt)->lp->host->host_no, \
+ pkt->rport->port_id, ##args))
+
+#define FC_EXCH_DBG(exch, fmt, args...) \
+ FC_CHECK_LOGGING(FC_EXCH_LOGGING, \
+ printk(KERN_INFO "host%u: xid %4x: " fmt, \
+ (exch)->lp->host->host_no, \
+ exch->xid, ##args))
+
+#define FC_SCSI_DBG(lport, fmt, args...) \
+ FC_CHECK_LOGGING(FC_SCSI_LOGGING, \
+ printk(KERN_INFO "host%u: scsi: " fmt, \
+ (lport)->host->host_no, ##args))
+
+/*
+ * Set up direct-data placement for this I/O request
+ */
+void fc_fcp_ddp_setup(struct fc_fcp_pkt *fsp, u16 xid);
+
+/*
+ * Module setup functions
+ */
+int fc_setup_exch_mgr(void);
+void fc_destroy_exch_mgr(void);
+int fc_setup_rport(void);
+void fc_destroy_rport(void);
+int fc_setup_fcp(void);
+void fc_destroy_fcp(void);
+
+/*
+ * Internal libfc functions
+ */
+const char *fc_els_resp_type(struct fc_frame *);
+
+/*
+ * Copies a buffer into an sg list
+ */
+u32 fc_copy_buffer_to_sglist(void *buf, size_t len,
+ struct scatterlist *sg,
+ u32 *nents, size_t *offset,
+ enum km_type km_type, u32 *crc);
+
+#endif /* _FC_LIBFC_H_ */
diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c
index bd2f771..74338c8 100644
--- a/drivers/scsi/libfc/fc_lport.c
+++ b/drivers/scsi/libfc/fc_lport.c
@@ -56,7 +56,7 @@
* at the same time.
*
* When discovery succeeds or fails a callback is made to the lport as
- * notification. Currently, succesful discovery causes the lport to take no
+ * notification. Currently, successful discovery causes the lport to take no
* action. A failure will cause the lport to reset. There is likely a circular
* locking problem with this implementation.
*/
@@ -94,6 +94,9 @@
#include <scsi/libfc.h>
#include <scsi/fc_encode.h>
+#include <linux/scatterlist.h>
+
+#include "fc_libfc.h"
/* Fabric IDs to use for point-to-point mode, chosen on whims. */
#define FC_LOCAL_PTP_FID_LO 0x010101
@@ -106,8 +109,7 @@
static void fc_lport_enter_reset(struct fc_lport *);
static void fc_lport_enter_flogi(struct fc_lport *);
static void fc_lport_enter_dns(struct fc_lport *);
-static void fc_lport_enter_rpn_id(struct fc_lport *);
-static void fc_lport_enter_rft_id(struct fc_lport *);
+static void fc_lport_enter_ns(struct fc_lport *, enum fc_lport_state);
static void fc_lport_enter_scr(struct fc_lport *);
static void fc_lport_enter_ready(struct fc_lport *);
static void fc_lport_enter_logo(struct fc_lport *);
@@ -116,14 +118,40 @@
[LPORT_ST_DISABLED] = "disabled",
[LPORT_ST_FLOGI] = "FLOGI",
[LPORT_ST_DNS] = "dNS",
- [LPORT_ST_RPN_ID] = "RPN_ID",
+ [LPORT_ST_RNN_ID] = "RNN_ID",
+ [LPORT_ST_RSNN_NN] = "RSNN_NN",
+ [LPORT_ST_RSPN_ID] = "RSPN_ID",
[LPORT_ST_RFT_ID] = "RFT_ID",
+ [LPORT_ST_RFF_ID] = "RFF_ID",
[LPORT_ST_SCR] = "SCR",
[LPORT_ST_READY] = "Ready",
[LPORT_ST_LOGO] = "LOGO",
[LPORT_ST_RESET] = "reset",
};
+/**
+ * struct fc_bsg_info - FC Passthrough managemet structure
+ * @job: The passthrough job
+ * @lport: The local port to pass through a command
+ * @rsp_code: The expected response code
+ * @sg: job->reply_payload.sg_list
+ * @nents: job->reply_payload.sg_cnt
+ * @offset: The offset into the response data
+ */
+struct fc_bsg_info {
+ struct fc_bsg_job *job;
+ struct fc_lport *lport;
+ u16 rsp_code;
+ struct scatterlist *sg;
+ u32 nents;
+ size_t offset;
+};
+
+/**
+ * fc_frame_drop() - Dummy frame handler
+ * @lport: The local port the frame was received on
+ * @fp: The received frame
+ */
static int fc_frame_drop(struct fc_lport *lport, struct fc_frame *fp)
{
fc_frame_free(fp);
@@ -150,8 +178,8 @@
switch (event) {
case RPORT_EV_READY:
if (lport->state == LPORT_ST_DNS) {
- lport->dns_rp = rdata;
- fc_lport_enter_rpn_id(lport);
+ lport->dns_rdata = rdata;
+ fc_lport_enter_ns(lport, LPORT_ST_RNN_ID);
} else {
FC_LPORT_DBG(lport, "Received an READY event "
"on port (%6x) for the directory "
@@ -165,7 +193,7 @@
case RPORT_EV_LOGO:
case RPORT_EV_FAILED:
case RPORT_EV_STOP:
- lport->dns_rp = NULL;
+ lport->dns_rdata = NULL;
break;
case RPORT_EV_NONE:
break;
@@ -189,8 +217,8 @@
/**
* fc_lport_ptp_setup() - Create an rport for point-to-point mode
- * @lport: The lport to attach the ptp rport to
- * @fid: The FID of the ptp rport
+ * @lport: The lport to attach the ptp rport to
+ * @remote_fid: The FID of the ptp rport
* @remote_wwpn: The WWPN of the ptp rport
* @remote_wwnn: The WWNN of the ptp rport
*/
@@ -199,18 +227,22 @@
u64 remote_wwnn)
{
mutex_lock(&lport->disc.disc_mutex);
- if (lport->ptp_rp)
- lport->tt.rport_logoff(lport->ptp_rp);
- lport->ptp_rp = lport->tt.rport_create(lport, remote_fid);
- lport->ptp_rp->ids.port_name = remote_wwpn;
- lport->ptp_rp->ids.node_name = remote_wwnn;
+ if (lport->ptp_rdata)
+ lport->tt.rport_logoff(lport->ptp_rdata);
+ lport->ptp_rdata = lport->tt.rport_create(lport, remote_fid);
+ lport->ptp_rdata->ids.port_name = remote_wwpn;
+ lport->ptp_rdata->ids.node_name = remote_wwnn;
mutex_unlock(&lport->disc.disc_mutex);
- lport->tt.rport_login(lport->ptp_rp);
+ lport->tt.rport_login(lport->ptp_rdata);
fc_lport_enter_ready(lport);
}
+/**
+ * fc_get_host_port_type() - Return the port type of the given Scsi_Host
+ * @shost: The SCSI host whose port type is to be determined
+ */
void fc_get_host_port_type(struct Scsi_Host *shost)
{
/* TODO - currently just NPORT */
@@ -218,17 +250,33 @@
}
EXPORT_SYMBOL(fc_get_host_port_type);
+/**
+ * fc_get_host_port_state() - Return the port state of the given Scsi_Host
+ * @shost: The SCSI host whose port state is to be determined
+ */
void fc_get_host_port_state(struct Scsi_Host *shost)
{
- struct fc_lport *lp = shost_priv(shost);
+ struct fc_lport *lport = shost_priv(shost);
- if (lp->link_up)
- fc_host_port_state(shost) = FC_PORTSTATE_ONLINE;
+ mutex_lock(&lport->lp_mutex);
+ if (!lport->link_up)
+ fc_host_port_state(shost) = FC_PORTSTATE_LINKDOWN;
else
- fc_host_port_state(shost) = FC_PORTSTATE_OFFLINE;
+ switch (lport->state) {
+ case LPORT_ST_READY:
+ fc_host_port_state(shost) = FC_PORTSTATE_ONLINE;
+ break;
+ default:
+ fc_host_port_state(shost) = FC_PORTSTATE_OFFLINE;
+ }
+ mutex_unlock(&lport->lp_mutex);
}
EXPORT_SYMBOL(fc_get_host_port_state);
+/**
+ * fc_get_host_speed() - Return the speed of the given Scsi_Host
+ * @shost: The SCSI host whose port speed is to be determined
+ */
void fc_get_host_speed(struct Scsi_Host *shost)
{
struct fc_lport *lport = shost_priv(shost);
@@ -237,24 +285,28 @@
}
EXPORT_SYMBOL(fc_get_host_speed);
+/**
+ * fc_get_host_stats() - Return the Scsi_Host's statistics
+ * @shost: The SCSI host whose statistics are to be returned
+ */
struct fc_host_statistics *fc_get_host_stats(struct Scsi_Host *shost)
{
struct fc_host_statistics *fcoe_stats;
- struct fc_lport *lp = shost_priv(shost);
+ struct fc_lport *lport = shost_priv(shost);
struct timespec v0, v1;
unsigned int cpu;
- fcoe_stats = &lp->host_stats;
+ fcoe_stats = &lport->host_stats;
memset(fcoe_stats, 0, sizeof(struct fc_host_statistics));
jiffies_to_timespec(jiffies, &v0);
- jiffies_to_timespec(lp->boot_time, &v1);
+ jiffies_to_timespec(lport->boot_time, &v1);
fcoe_stats->seconds_since_last_reset = (v0.tv_sec - v1.tv_sec);
for_each_possible_cpu(cpu) {
struct fcoe_dev_stats *stats;
- stats = per_cpu_ptr(lp->dev_stats, cpu);
+ stats = per_cpu_ptr(lport->dev_stats, cpu);
fcoe_stats->tx_frames += stats->TxFrames;
fcoe_stats->tx_words += stats->TxWords;
@@ -279,12 +331,15 @@
}
EXPORT_SYMBOL(fc_get_host_stats);
-/*
- * Fill in FLOGI command for request.
+/**
+ * fc_lport_flogi_fill() - Fill in FLOGI command for request
+ * @lport: The local port the FLOGI is for
+ * @flogi: The FLOGI command
+ * @op: The opcode
*/
-static void
-fc_lport_flogi_fill(struct fc_lport *lport, struct fc_els_flogi *flogi,
- unsigned int op)
+static void fc_lport_flogi_fill(struct fc_lport *lport,
+ struct fc_els_flogi *flogi,
+ unsigned int op)
{
struct fc_els_csp *sp;
struct fc_els_cssp *cp;
@@ -312,8 +367,10 @@
}
}
-/*
- * Add a supported FC-4 type.
+/**
+ * fc_lport_add_fc4_type() - Add a supported FC-4 type to a local port
+ * @lport: The local port to add a new FC-4 type to
+ * @type: The new FC-4 type
*/
static void fc_lport_add_fc4_type(struct fc_lport *lport, enum fc_fh_type type)
{
@@ -325,11 +382,11 @@
/**
* fc_lport_recv_rlir_req() - Handle received Registered Link Incident Report.
+ * @sp: The sequence in the RLIR exchange
+ * @fp: The RLIR request frame
* @lport: Fibre Channel local port recieving the RLIR
- * @sp: current sequence in the RLIR exchange
- * @fp: RLIR request frame
*
- * Locking Note: The lport lock is exected to be held before calling
+ * Locking Note: The lport lock is expected to be held before calling
* this function.
*/
static void fc_lport_recv_rlir_req(struct fc_seq *sp, struct fc_frame *fp,
@@ -344,11 +401,11 @@
/**
* fc_lport_recv_echo_req() - Handle received ECHO request
- * @lport: Fibre Channel local port recieving the ECHO
- * @sp: current sequence in the ECHO exchange
- * @fp: ECHO request frame
+ * @sp: The sequence in the ECHO exchange
+ * @fp: ECHO request frame
+ * @lport: The local port recieving the ECHO
*
- * Locking Note: The lport lock is exected to be held before calling
+ * Locking Note: The lport lock is expected to be held before calling
* this function.
*/
static void fc_lport_recv_echo_req(struct fc_seq *sp, struct fc_frame *in_fp,
@@ -361,7 +418,7 @@
void *dp;
u32 f_ctl;
- FC_LPORT_DBG(lport, "Received RLIR request while in state %s\n",
+ FC_LPORT_DBG(lport, "Received ECHO request while in state %s\n",
fc_lport_state(lport));
len = fr_len(in_fp) - sizeof(struct fc_frame_header);
@@ -374,7 +431,7 @@
if (fp) {
dp = fc_frame_payload_get(fp, len);
memcpy(dp, pp, len);
- *((u32 *)dp) = htonl(ELS_LS_ACC << 24);
+ *((__be32 *)dp) = htonl(ELS_LS_ACC << 24);
sp = lport->tt.seq_start_next(sp);
f_ctl = FC_FC_EX_CTX | FC_FC_LAST_SEQ | FC_FC_END_SEQ;
fc_fill_fc_hdr(fp, FC_RCTL_ELS_REP, ep->did, ep->sid,
@@ -385,12 +442,12 @@
}
/**
- * fc_lport_recv_echo_req() - Handle received Request Node ID data request
- * @lport: Fibre Channel local port recieving the RNID
- * @sp: current sequence in the RNID exchange
- * @fp: RNID request frame
+ * fc_lport_recv_rnid_req() - Handle received Request Node ID data request
+ * @sp: The sequence in the RNID exchange
+ * @fp: The RNID request frame
+ * @lport: The local port recieving the RNID
*
- * Locking Note: The lport lock is exected to be held before calling
+ * Locking Note: The lport lock is expected to be held before calling
* this function.
*/
static void fc_lport_recv_rnid_req(struct fc_seq *sp, struct fc_frame *in_fp,
@@ -453,9 +510,9 @@
/**
* fc_lport_recv_logo_req() - Handle received fabric LOGO request
- * @lport: Fibre Channel local port recieving the LOGO
- * @sp: current sequence in the LOGO exchange
- * @fp: LOGO request frame
+ * @sp: The sequence in the LOGO exchange
+ * @fp: The LOGO request frame
+ * @lport: The local port recieving the LOGO
*
* Locking Note: The lport lock is exected to be held before calling
* this function.
@@ -470,7 +527,7 @@
/**
* fc_fabric_login() - Start the lport state machine
- * @lport: The lport that should log into the fabric
+ * @lport: The local port that should log into the fabric
*
* Locking Note: This function should not be called
* with the lport lock held.
@@ -491,47 +548,69 @@
EXPORT_SYMBOL(fc_fabric_login);
/**
- * fc_linkup() - Handler for transport linkup events
+ * __fc_linkup() - Handler for transport linkup events
* @lport: The lport whose link is up
+ *
+ * Locking: must be called with the lp_mutex held
*/
-void fc_linkup(struct fc_lport *lport)
+void __fc_linkup(struct fc_lport *lport)
{
- printk(KERN_INFO "libfc: Link up on port (%6x)\n",
- fc_host_port_id(lport->host));
-
- mutex_lock(&lport->lp_mutex);
if (!lport->link_up) {
lport->link_up = 1;
if (lport->state == LPORT_ST_RESET)
fc_lport_enter_flogi(lport);
}
+}
+
+/**
+ * fc_linkup() - Handler for transport linkup events
+ * @lport: The local port whose link is up
+ */
+void fc_linkup(struct fc_lport *lport)
+{
+ printk(KERN_INFO "host%d: libfc: Link up on port (%6x)\n",
+ lport->host->host_no, fc_host_port_id(lport->host));
+
+ mutex_lock(&lport->lp_mutex);
+ __fc_linkup(lport);
mutex_unlock(&lport->lp_mutex);
}
EXPORT_SYMBOL(fc_linkup);
/**
- * fc_linkdown() - Handler for transport linkdown events
+ * __fc_linkdown() - Handler for transport linkdown events
* @lport: The lport whose link is down
+ *
+ * Locking: must be called with the lp_mutex held
*/
-void fc_linkdown(struct fc_lport *lport)
+void __fc_linkdown(struct fc_lport *lport)
{
- mutex_lock(&lport->lp_mutex);
- printk(KERN_INFO "libfc: Link down on port (%6x)\n",
- fc_host_port_id(lport->host));
-
if (lport->link_up) {
lport->link_up = 0;
fc_lport_enter_reset(lport);
lport->tt.fcp_cleanup(lport);
}
+}
+
+/**
+ * fc_linkdown() - Handler for transport linkdown events
+ * @lport: The local port whose link is down
+ */
+void fc_linkdown(struct fc_lport *lport)
+{
+ printk(KERN_INFO "host%d: libfc: Link down on port (%6x)\n",
+ lport->host->host_no, fc_host_port_id(lport->host));
+
+ mutex_lock(&lport->lp_mutex);
+ __fc_linkdown(lport);
mutex_unlock(&lport->lp_mutex);
}
EXPORT_SYMBOL(fc_linkdown);
/**
* fc_fabric_logoff() - Logout of the fabric
- * @lport: fc_lport pointer to logoff the fabric
+ * @lport: The local port to logoff the fabric
*
* Return value:
* 0 for success, -1 for failure
@@ -540,8 +619,8 @@
{
lport->tt.disc_stop_final(lport);
mutex_lock(&lport->lp_mutex);
- if (lport->dns_rp)
- lport->tt.rport_logoff(lport->dns_rp);
+ if (lport->dns_rdata)
+ lport->tt.rport_logoff(lport->dns_rdata);
mutex_unlock(&lport->lp_mutex);
lport->tt.rport_flush_queue();
mutex_lock(&lport->lp_mutex);
@@ -553,11 +632,9 @@
EXPORT_SYMBOL(fc_fabric_logoff);
/**
- * fc_lport_destroy() - unregister a fc_lport
- * @lport: fc_lport pointer to unregister
+ * fc_lport_destroy() - Unregister a fc_lport
+ * @lport: The local port to unregister
*
- * Return value:
- * None
* Note:
* exit routine for fc_lport instance
* clean-up all the allocated memory
@@ -580,13 +657,9 @@
EXPORT_SYMBOL(fc_lport_destroy);
/**
- * fc_set_mfs() - sets up the mfs for the corresponding fc_lport
- * @lport: fc_lport pointer to unregister
- * @mfs: the new mfs for fc_lport
- *
- * Set mfs for the given fc_lport to the new mfs.
- *
- * Return: 0 for success
+ * fc_set_mfs() - Set the maximum frame size for a local port
+ * @lport: The local port to set the MFS for
+ * @mfs: The new MFS
*/
int fc_set_mfs(struct fc_lport *lport, u32 mfs)
{
@@ -617,7 +690,7 @@
/**
* fc_lport_disc_callback() - Callback for discovery events
- * @lport: FC local port
+ * @lport: The local port receiving the event
* @event: The discovery event
*/
void fc_lport_disc_callback(struct fc_lport *lport, enum fc_disc_event event)
@@ -627,8 +700,9 @@
FC_LPORT_DBG(lport, "Discovery succeeded\n");
break;
case DISC_EV_FAILED:
- printk(KERN_ERR "libfc: Discovery failed for port (%6x)\n",
- fc_host_port_id(lport->host));
+ printk(KERN_ERR "host%d: libfc: "
+ "Discovery failed for port (%6x)\n",
+ lport->host->host_no, fc_host_port_id(lport->host));
mutex_lock(&lport->lp_mutex);
fc_lport_enter_reset(lport);
mutex_unlock(&lport->lp_mutex);
@@ -641,7 +715,7 @@
/**
* fc_rport_enter_ready() - Enter the ready state and start discovery
- * @lport: Fibre Channel local port that is ready
+ * @lport: The local port that is ready
*
* Locking Note: The lport lock is expected to be held before calling
* this routine.
@@ -652,22 +726,46 @@
fc_lport_state(lport));
fc_lport_state_enter(lport, LPORT_ST_READY);
+ if (lport->vport)
+ fc_vport_set_state(lport->vport, FC_VPORT_ACTIVE);
+ fc_vports_linkchange(lport);
- if (!lport->ptp_rp)
+ if (!lport->ptp_rdata)
lport->tt.disc_start(fc_lport_disc_callback, lport);
}
/**
+ * fc_lport_set_port_id() - set the local port Port ID
+ * @lport: The local port which will have its Port ID set.
+ * @port_id: The new port ID.
+ * @fp: The frame containing the incoming request, or NULL.
+ *
+ * Locking Note: The lport lock is expected to be held before calling
+ * this function.
+ */
+static void fc_lport_set_port_id(struct fc_lport *lport, u32 port_id,
+ struct fc_frame *fp)
+{
+ if (port_id)
+ printk(KERN_INFO "host%d: Assigned Port ID %6x\n",
+ lport->host->host_no, port_id);
+
+ fc_host_port_id(lport->host) = port_id;
+ if (lport->tt.lport_set_port_id)
+ lport->tt.lport_set_port_id(lport, port_id, fp);
+}
+
+/**
* fc_lport_recv_flogi_req() - Receive a FLOGI request
* @sp_in: The sequence the FLOGI is on
- * @rx_fp: The frame the FLOGI is in
- * @lport: The lport that recieved the request
+ * @rx_fp: The FLOGI frame
+ * @lport: The local port that recieved the request
*
* A received FLOGI request indicates a point-to-point connection.
* Accept it with the common service parameters indicating our N port.
* Set up to do a PLOGI if we have the higher-number WWPN.
*
- * Locking Note: The lport lock is exected to be held before calling
+ * Locking Note: The lport lock is expected to be held before calling
* this function.
*/
static void fc_lport_recv_flogi_req(struct fc_seq *sp_in,
@@ -695,8 +793,9 @@
goto out;
remote_wwpn = get_unaligned_be64(&flp->fl_wwpn);
if (remote_wwpn == lport->wwpn) {
- printk(KERN_WARNING "libfc: Received FLOGI from port "
- "with same WWPN %llx\n", remote_wwpn);
+ printk(KERN_WARNING "host%d: libfc: Received FLOGI from port "
+ "with same WWPN %llx\n",
+ lport->host->host_no, remote_wwpn);
goto out;
}
FC_LPORT_DBG(lport, "FLOGI from port WWPN %llx\n", remote_wwpn);
@@ -715,7 +814,7 @@
remote_fid = FC_LOCAL_PTP_FID_HI;
}
- fc_host_port_id(lport->host) = local_fid;
+ fc_lport_set_port_id(lport, local_fid, rx_fp);
fp = fc_frame_alloc(lport, sizeof(*flp));
if (fp) {
@@ -747,9 +846,9 @@
/**
* fc_lport_recv_req() - The generic lport request handler
- * @lport: The lport that received the request
- * @sp: The sequence the request is on
- * @fp: The frame the request is in
+ * @lport: The local port that received the request
+ * @sp: The sequence the request is on
+ * @fp: The request frame
*
* This function will see if the lport handles the request or
* if an rport should handle the request.
@@ -817,8 +916,8 @@
}
/**
- * fc_lport_reset() - Reset an lport
- * @lport: The lport which should be reset
+ * fc_lport_reset() - Reset a local port
+ * @lport: The local port which should be reset
*
* Locking Note: This functions should not be called with the
* lport lock held.
@@ -834,29 +933,31 @@
EXPORT_SYMBOL(fc_lport_reset);
/**
- * fc_lport_reset_locked() - Reset the local port
- * @lport: Fibre Channel local port to be reset
+ * fc_lport_reset_locked() - Reset the local port w/ the lport lock held
+ * @lport: The local port to be reset
*
* Locking Note: The lport lock is expected to be held before calling
* this routine.
*/
static void fc_lport_reset_locked(struct fc_lport *lport)
{
- if (lport->dns_rp)
- lport->tt.rport_logoff(lport->dns_rp);
+ if (lport->dns_rdata)
+ lport->tt.rport_logoff(lport->dns_rdata);
- lport->ptp_rp = NULL;
+ lport->ptp_rdata = NULL;
lport->tt.disc_stop(lport);
lport->tt.exch_mgr_reset(lport, 0, 0);
fc_host_fabric_name(lport->host) = 0;
- fc_host_port_id(lport->host) = 0;
+
+ if (fc_host_port_id(lport->host))
+ fc_lport_set_port_id(lport, 0, NULL);
}
/**
* fc_lport_enter_reset() - Reset the local port
- * @lport: Fibre Channel local port to be reset
+ * @lport: The local port to be reset
*
* Locking Note: The lport lock is expected to be held before calling
* this routine.
@@ -866,15 +967,22 @@
FC_LPORT_DBG(lport, "Entered RESET state from %s state\n",
fc_lport_state(lport));
+ if (lport->vport) {
+ if (lport->link_up)
+ fc_vport_set_state(lport->vport, FC_VPORT_INITIALIZING);
+ else
+ fc_vport_set_state(lport->vport, FC_VPORT_LINKDOWN);
+ }
fc_lport_state_enter(lport, LPORT_ST_RESET);
+ fc_vports_linkchange(lport);
fc_lport_reset_locked(lport);
if (lport->link_up)
fc_lport_enter_flogi(lport);
}
/**
- * fc_lport_enter_disabled() - disable the local port
- * @lport: Fibre Channel local port to be reset
+ * fc_lport_enter_disabled() - Disable the local port
+ * @lport: The local port to be reset
*
* Locking Note: The lport lock is expected to be held before calling
* this routine.
@@ -885,13 +993,14 @@
fc_lport_state(lport));
fc_lport_state_enter(lport, LPORT_ST_DISABLED);
+ fc_vports_linkchange(lport);
fc_lport_reset_locked(lport);
}
/**
* fc_lport_error() - Handler for any errors
- * @lport: The fc_lport object
- * @fp: The frame pointer
+ * @lport: The local port that the error was on
+ * @fp: The error code encoded in a frame pointer
*
* If the error was caused by a resource allocation failure
* then wait for half a second and retry, otherwise retry
@@ -922,8 +1031,11 @@
case LPORT_ST_DISABLED:
case LPORT_ST_READY:
case LPORT_ST_RESET:
- case LPORT_ST_RPN_ID:
+ case LPORT_ST_RNN_ID:
+ case LPORT_ST_RSNN_NN:
+ case LPORT_ST_RSPN_ID:
case LPORT_ST_RFT_ID:
+ case LPORT_ST_RFF_ID:
case LPORT_ST_SCR:
case LPORT_ST_DNS:
case LPORT_ST_FLOGI:
@@ -936,33 +1048,33 @@
}
/**
- * fc_lport_rft_id_resp() - Handle response to Register Fibre
- * Channel Types by ID (RPN_ID) request
- * @sp: current sequence in RPN_ID exchange
- * @fp: response frame
+ * fc_lport_ns_resp() - Handle response to a name server
+ * registration exchange
+ * @sp: current sequence in exchange
+ * @fp: response frame
* @lp_arg: Fibre Channel host port instance
*
* Locking Note: This function will be called without the lport lock
- * held, but it will lock, call an _enter_* function or fc_lport_error
+ * held, but it will lock, call an _enter_* function or fc_lport_error()
* and then unlock the lport.
*/
-static void fc_lport_rft_id_resp(struct fc_seq *sp, struct fc_frame *fp,
- void *lp_arg)
+static void fc_lport_ns_resp(struct fc_seq *sp, struct fc_frame *fp,
+ void *lp_arg)
{
struct fc_lport *lport = lp_arg;
struct fc_frame_header *fh;
struct fc_ct_hdr *ct;
- FC_LPORT_DBG(lport, "Received a RFT_ID %s\n", fc_els_resp_type(fp));
+ FC_LPORT_DBG(lport, "Received a ns %s\n", fc_els_resp_type(fp));
if (fp == ERR_PTR(-FC_EX_CLOSED))
return;
mutex_lock(&lport->lp_mutex);
- if (lport->state != LPORT_ST_RFT_ID) {
- FC_LPORT_DBG(lport, "Received a RFT_ID response, but in state "
- "%s\n", fc_lport_state(lport));
+ if (lport->state < LPORT_ST_RNN_ID || lport->state > LPORT_ST_RFF_ID) {
+ FC_LPORT_DBG(lport, "Received a name server response, "
+ "but in state %s\n", fc_lport_state(lport));
if (IS_ERR(fp))
goto err;
goto out;
@@ -980,7 +1092,26 @@
ct->ct_fs_type == FC_FST_DIR &&
ct->ct_fs_subtype == FC_NS_SUBTYPE &&
ntohs(ct->ct_cmd) == FC_FS_ACC)
- fc_lport_enter_scr(lport);
+ switch (lport->state) {
+ case LPORT_ST_RNN_ID:
+ fc_lport_enter_ns(lport, LPORT_ST_RSNN_NN);
+ break;
+ case LPORT_ST_RSNN_NN:
+ fc_lport_enter_ns(lport, LPORT_ST_RSPN_ID);
+ break;
+ case LPORT_ST_RSPN_ID:
+ fc_lport_enter_ns(lport, LPORT_ST_RFT_ID);
+ break;
+ case LPORT_ST_RFT_ID:
+ fc_lport_enter_ns(lport, LPORT_ST_RFF_ID);
+ break;
+ case LPORT_ST_RFF_ID:
+ fc_lport_enter_scr(lport);
+ break;
+ default:
+ /* should have already been caught by state checks */
+ break;
+ }
else
fc_lport_error(lport, fp);
out:
@@ -990,63 +1121,9 @@
}
/**
- * fc_lport_rpn_id_resp() - Handle response to Register Port
- * Name by ID (RPN_ID) request
- * @sp: current sequence in RPN_ID exchange
- * @fp: response frame
- * @lp_arg: Fibre Channel host port instance
- *
- * Locking Note: This function will be called without the lport lock
- * held, but it will lock, call an _enter_* function or fc_lport_error
- * and then unlock the lport.
- */
-static void fc_lport_rpn_id_resp(struct fc_seq *sp, struct fc_frame *fp,
- void *lp_arg)
-{
- struct fc_lport *lport = lp_arg;
- struct fc_frame_header *fh;
- struct fc_ct_hdr *ct;
-
- FC_LPORT_DBG(lport, "Received a RPN_ID %s\n", fc_els_resp_type(fp));
-
- if (fp == ERR_PTR(-FC_EX_CLOSED))
- return;
-
- mutex_lock(&lport->lp_mutex);
-
- if (lport->state != LPORT_ST_RPN_ID) {
- FC_LPORT_DBG(lport, "Received a RPN_ID response, but in state "
- "%s\n", fc_lport_state(lport));
- if (IS_ERR(fp))
- goto err;
- goto out;
- }
-
- if (IS_ERR(fp)) {
- fc_lport_error(lport, fp);
- goto err;
- }
-
- fh = fc_frame_header_get(fp);
- ct = fc_frame_payload_get(fp, sizeof(*ct));
- if (fh && ct && fh->fh_type == FC_TYPE_CT &&
- ct->ct_fs_type == FC_FST_DIR &&
- ct->ct_fs_subtype == FC_NS_SUBTYPE &&
- ntohs(ct->ct_cmd) == FC_FS_ACC)
- fc_lport_enter_rft_id(lport);
- else
- fc_lport_error(lport, fp);
-
-out:
- fc_frame_free(fp);
-err:
- mutex_unlock(&lport->lp_mutex);
-}
-
-/**
* fc_lport_scr_resp() - Handle response to State Change Register (SCR) request
- * @sp: current sequence in SCR exchange
- * @fp: response frame
+ * @sp: current sequence in SCR exchange
+ * @fp: response frame
* @lp_arg: Fibre Channel lport port instance that sent the registration request
*
* Locking Note: This function will be called without the lport lock
@@ -1092,8 +1169,8 @@
}
/**
- * fc_lport_enter_scr() - Send a State Change Register (SCR) request
- * @lport: Fibre Channel local port to register for state changes
+ * fc_lport_enter_scr() - Send a SCR (State Change Register) request
+ * @lport: The local port to register for state changes
*
* Locking Note: The lport lock is expected to be held before calling
* this routine.
@@ -1114,78 +1191,74 @@
}
if (!lport->tt.elsct_send(lport, FC_FID_FCTRL, fp, ELS_SCR,
- fc_lport_scr_resp, lport, lport->e_d_tov))
- fc_lport_error(lport, fp);
+ fc_lport_scr_resp, lport,
+ 2 * lport->r_a_tov))
+ fc_lport_error(lport, NULL);
}
/**
- * fc_lport_enter_rft_id() - Register FC4-types with the name server
+ * fc_lport_enter_ns() - register some object with the name server
* @lport: Fibre Channel local port to register
*
* Locking Note: The lport lock is expected to be held before calling
* this routine.
*/
-static void fc_lport_enter_rft_id(struct fc_lport *lport)
+static void fc_lport_enter_ns(struct fc_lport *lport, enum fc_lport_state state)
{
struct fc_frame *fp;
- struct fc_ns_fts *lps;
- int i;
+ enum fc_ns_req cmd;
+ int size = sizeof(struct fc_ct_hdr);
+ size_t len;
- FC_LPORT_DBG(lport, "Entered RFT_ID state from %s state\n",
+ FC_LPORT_DBG(lport, "Entered %s state from %s state\n",
+ fc_lport_state_names[state],
fc_lport_state(lport));
- fc_lport_state_enter(lport, LPORT_ST_RFT_ID);
+ fc_lport_state_enter(lport, state);
- lps = &lport->fcts;
- i = sizeof(lps->ff_type_map) / sizeof(lps->ff_type_map[0]);
- while (--i >= 0)
- if (ntohl(lps->ff_type_map[i]) != 0)
- break;
- if (i < 0) {
- /* nothing to register, move on to SCR */
- fc_lport_enter_scr(lport);
+ switch (state) {
+ case LPORT_ST_RNN_ID:
+ cmd = FC_NS_RNN_ID;
+ size += sizeof(struct fc_ns_rn_id);
+ break;
+ case LPORT_ST_RSNN_NN:
+ len = strnlen(fc_host_symbolic_name(lport->host), 255);
+ /* if there is no symbolic name, skip to RFT_ID */
+ if (!len)
+ return fc_lport_enter_ns(lport, LPORT_ST_RFT_ID);
+ cmd = FC_NS_RSNN_NN;
+ size += sizeof(struct fc_ns_rsnn) + len;
+ break;
+ case LPORT_ST_RSPN_ID:
+ len = strnlen(fc_host_symbolic_name(lport->host), 255);
+ /* if there is no symbolic name, skip to RFT_ID */
+ if (!len)
+ return fc_lport_enter_ns(lport, LPORT_ST_RFT_ID);
+ cmd = FC_NS_RSPN_ID;
+ size += sizeof(struct fc_ns_rspn) + len;
+ break;
+ case LPORT_ST_RFT_ID:
+ cmd = FC_NS_RFT_ID;
+ size += sizeof(struct fc_ns_rft);
+ break;
+ case LPORT_ST_RFF_ID:
+ cmd = FC_NS_RFF_ID;
+ size += sizeof(struct fc_ns_rff_id);
+ break;
+ default:
+ fc_lport_error(lport, NULL);
return;
}
- fp = fc_frame_alloc(lport, sizeof(struct fc_ct_hdr) +
- sizeof(struct fc_ns_rft));
+ fp = fc_frame_alloc(lport, size);
if (!fp) {
fc_lport_error(lport, fp);
return;
}
- if (!lport->tt.elsct_send(lport, FC_FID_DIR_SERV, fp, FC_NS_RFT_ID,
- fc_lport_rft_id_resp,
- lport, lport->e_d_tov))
- fc_lport_error(lport, fp);
-}
-
-/**
- * fc_rport_enter_rft_id() - Register port name with the name server
- * @lport: Fibre Channel local port to register
- *
- * Locking Note: The lport lock is expected to be held before calling
- * this routine.
- */
-static void fc_lport_enter_rpn_id(struct fc_lport *lport)
-{
- struct fc_frame *fp;
-
- FC_LPORT_DBG(lport, "Entered RPN_ID state from %s state\n",
- fc_lport_state(lport));
-
- fc_lport_state_enter(lport, LPORT_ST_RPN_ID);
-
- fp = fc_frame_alloc(lport, sizeof(struct fc_ct_hdr) +
- sizeof(struct fc_ns_rn_id));
- if (!fp) {
- fc_lport_error(lport, fp);
- return;
- }
-
- if (!lport->tt.elsct_send(lport, FC_FID_DIR_SERV, fp, FC_NS_RPN_ID,
- fc_lport_rpn_id_resp,
- lport, lport->e_d_tov))
+ if (!lport->tt.elsct_send(lport, FC_FID_DIR_SERV, fp, cmd,
+ fc_lport_ns_resp,
+ lport, 3 * lport->r_a_tov))
fc_lport_error(lport, fp);
}
@@ -1194,8 +1267,8 @@
};
/**
- * fc_rport_enter_dns() - Create a rport to the name server
- * @lport: Fibre Channel local port requesting a rport for the name server
+ * fc_rport_enter_dns() - Create a fc_rport for the name server
+ * @lport: The local port requesting a remote port for the name server
*
* Locking Note: The lport lock is expected to be held before calling
* this routine.
@@ -1224,8 +1297,8 @@
}
/**
- * fc_lport_timeout() - Handler for the retry_work timer.
- * @work: The work struct of the fc_lport
+ * fc_lport_timeout() - Handler for the retry_work timer
+ * @work: The work struct of the local port
*/
static void fc_lport_timeout(struct work_struct *work)
{
@@ -1237,21 +1310,25 @@
switch (lport->state) {
case LPORT_ST_DISABLED:
- case LPORT_ST_READY:
- case LPORT_ST_RESET:
WARN_ON(1);
break;
+ case LPORT_ST_READY:
+ WARN_ON(1);
+ break;
+ case LPORT_ST_RESET:
+ break;
case LPORT_ST_FLOGI:
fc_lport_enter_flogi(lport);
break;
case LPORT_ST_DNS:
fc_lport_enter_dns(lport);
break;
- case LPORT_ST_RPN_ID:
- fc_lport_enter_rpn_id(lport);
- break;
+ case LPORT_ST_RNN_ID:
+ case LPORT_ST_RSNN_NN:
+ case LPORT_ST_RSPN_ID:
case LPORT_ST_RFT_ID:
- fc_lport_enter_rft_id(lport);
+ case LPORT_ST_RFF_ID:
+ fc_lport_enter_ns(lport, lport->state);
break;
case LPORT_ST_SCR:
fc_lport_enter_scr(lport);
@@ -1266,16 +1343,16 @@
/**
* fc_lport_logo_resp() - Handle response to LOGO request
- * @sp: current sequence in LOGO exchange
- * @fp: response frame
- * @lp_arg: Fibre Channel lport port instance that sent the LOGO request
+ * @sp: The sequence that the LOGO was on
+ * @fp: The LOGO frame
+ * @lp_arg: The lport port that received the LOGO request
*
* Locking Note: This function will be called without the lport lock
- * held, but it will lock, call an _enter_* function or fc_lport_error
+ * held, but it will lock, call an _enter_* function or fc_lport_error()
* and then unlock the lport.
*/
-static void fc_lport_logo_resp(struct fc_seq *sp, struct fc_frame *fp,
- void *lp_arg)
+void fc_lport_logo_resp(struct fc_seq *sp, struct fc_frame *fp,
+ void *lp_arg)
{
struct fc_lport *lport = lp_arg;
u8 op;
@@ -1311,10 +1388,11 @@
err:
mutex_unlock(&lport->lp_mutex);
}
+EXPORT_SYMBOL(fc_lport_logo_resp);
/**
* fc_rport_enter_logo() - Logout of the fabric
- * @lport: Fibre Channel local port to be logged out
+ * @lport: The local port to be logged out
*
* Locking Note: The lport lock is expected to be held before calling
* this routine.
@@ -1328,6 +1406,7 @@
fc_lport_state(lport));
fc_lport_state_enter(lport, LPORT_ST_LOGO);
+ fc_vports_linkchange(lport);
fp = fc_frame_alloc(lport, sizeof(*logo));
if (!fp) {
@@ -1336,22 +1415,23 @@
}
if (!lport->tt.elsct_send(lport, FC_FID_FLOGI, fp, ELS_LOGO,
- fc_lport_logo_resp, lport, lport->e_d_tov))
- fc_lport_error(lport, fp);
+ fc_lport_logo_resp, lport,
+ 2 * lport->r_a_tov))
+ fc_lport_error(lport, NULL);
}
/**
* fc_lport_flogi_resp() - Handle response to FLOGI request
- * @sp: current sequence in FLOGI exchange
- * @fp: response frame
- * @lp_arg: Fibre Channel lport port instance that sent the FLOGI request
+ * @sp: The sequence that the FLOGI was on
+ * @fp: The FLOGI response frame
+ * @lp_arg: The lport port that received the FLOGI response
*
* Locking Note: This function will be called without the lport lock
- * held, but it will lock, call an _enter_* function or fc_lport_error
+ * held, but it will lock, call an _enter_* function or fc_lport_error()
* and then unlock the lport.
*/
-static void fc_lport_flogi_resp(struct fc_seq *sp, struct fc_frame *fp,
- void *lp_arg)
+void fc_lport_flogi_resp(struct fc_seq *sp, struct fc_frame *fp,
+ void *lp_arg)
{
struct fc_lport *lport = lp_arg;
struct fc_frame_header *fh;
@@ -1385,11 +1465,6 @@
fh = fc_frame_header_get(fp);
did = ntoh24(fh->fh_d_id);
if (fc_frame_payload_op(fp) == ELS_LS_ACC && did != 0) {
-
- printk(KERN_INFO "libfc: Assigned FID (%6x) in FLOGI response\n",
- did);
- fc_host_port_id(lport->host) = did;
-
flp = fc_frame_payload_get(fp, sizeof(*flp));
if (flp) {
mfs = ntohs(flp->fl_csp.sp_bb_data) &
@@ -1402,12 +1477,18 @@
e_d_tov = ntohl(flp->fl_csp.sp_e_d_tov);
if (csp_flags & FC_SP_FT_EDTR)
e_d_tov /= 1000000;
+
+ lport->npiv_enabled = !!(csp_flags & FC_SP_FT_NPIV_ACC);
+
if ((csp_flags & FC_SP_FT_FPORT) == 0) {
if (e_d_tov > lport->e_d_tov)
lport->e_d_tov = e_d_tov;
lport->r_a_tov = 2 * e_d_tov;
- printk(KERN_INFO "libfc: Port (%6x) entered "
- "point to point mode\n", did);
+ fc_lport_set_port_id(lport, did, fp);
+ printk(KERN_INFO "host%d: libfc: "
+ "Port (%6x) entered "
+ "point-to-point mode\n",
+ lport->host->host_no, did);
fc_lport_ptp_setup(lport, ntoh24(fh->fh_s_id),
get_unaligned_be64(
&flp->fl_wwpn),
@@ -1418,6 +1499,7 @@
lport->r_a_tov = r_a_tov;
fc_host_fabric_name(lport->host) =
get_unaligned_be64(&flp->fl_wwnn);
+ fc_lport_set_port_id(lport, did, fp);
fc_lport_enter_dns(lport);
}
}
@@ -1430,6 +1512,7 @@
err:
mutex_unlock(&lport->lp_mutex);
}
+EXPORT_SYMBOL(fc_lport_flogi_resp);
/**
* fc_rport_enter_flogi() - Send a FLOGI request to the fabric manager
@@ -1451,12 +1534,18 @@
if (!fp)
return fc_lport_error(lport, fp);
- if (!lport->tt.elsct_send(lport, FC_FID_FLOGI, fp, ELS_FLOGI,
- fc_lport_flogi_resp, lport, lport->e_d_tov))
- fc_lport_error(lport, fp);
+ if (!lport->tt.elsct_send(lport, FC_FID_FLOGI, fp,
+ lport->vport ? ELS_FDISC : ELS_FLOGI,
+ fc_lport_flogi_resp, lport,
+ lport->vport ? 2 * lport->r_a_tov :
+ lport->e_d_tov))
+ fc_lport_error(lport, NULL);
}
-/* Configure a fc_lport */
+/**
+ * fc_lport_config() - Configure a fc_lport
+ * @lport: The local port to be configured
+ */
int fc_lport_config(struct fc_lport *lport)
{
INIT_DELAYED_WORK(&lport->retry_work, fc_lport_timeout);
@@ -1471,6 +1560,10 @@
}
EXPORT_SYMBOL(fc_lport_config);
+/**
+ * fc_lport_init() - Initialize the lport layer for a local port
+ * @lport: The local port to initialize the exchange layer for
+ */
int fc_lport_init(struct fc_lport *lport)
{
if (!lport->tt.lport_recv)
@@ -1500,7 +1593,253 @@
if (lport->link_supported_speeds & FC_PORTSPEED_10GBIT)
fc_host_supported_speeds(lport->host) |= FC_PORTSPEED_10GBIT;
- INIT_LIST_HEAD(&lport->ema_list);
return 0;
}
EXPORT_SYMBOL(fc_lport_init);
+
+/**
+ * fc_lport_bsg_resp() - The common response handler for FC Passthrough requests
+ * @sp: The sequence for the FC Passthrough response
+ * @fp: The response frame
+ * @info_arg: The BSG info that the response is for
+ */
+static void fc_lport_bsg_resp(struct fc_seq *sp, struct fc_frame *fp,
+ void *info_arg)
+{
+ struct fc_bsg_info *info = info_arg;
+ struct fc_bsg_job *job = info->job;
+ struct fc_lport *lport = info->lport;
+ struct fc_frame_header *fh;
+ size_t len;
+ void *buf;
+
+ if (IS_ERR(fp)) {
+ job->reply->result = (PTR_ERR(fp) == -FC_EX_CLOSED) ?
+ -ECONNABORTED : -ETIMEDOUT;
+ job->reply_len = sizeof(uint32_t);
+ job->state_flags |= FC_RQST_STATE_DONE;
+ job->job_done(job);
+ kfree(info);
+ return;
+ }
+
+ mutex_lock(&lport->lp_mutex);
+ fh = fc_frame_header_get(fp);
+ len = fr_len(fp) - sizeof(*fh);
+ buf = fc_frame_payload_get(fp, 0);
+
+ if (fr_sof(fp) == FC_SOF_I3 && !ntohs(fh->fh_seq_cnt)) {
+ /* Get the response code from the first frame payload */
+ unsigned short cmd = (info->rsp_code == FC_FS_ACC) ?
+ ntohs(((struct fc_ct_hdr *)buf)->ct_cmd) :
+ (unsigned short)fc_frame_payload_op(fp);
+
+ /* Save the reply status of the job */
+ job->reply->reply_data.ctels_reply.status =
+ (cmd == info->rsp_code) ?
+ FC_CTELS_STATUS_OK : FC_CTELS_STATUS_REJECT;
+ }
+
+ job->reply->reply_payload_rcv_len +=
+ fc_copy_buffer_to_sglist(buf, len, info->sg, &info->nents,
+ &info->offset, KM_BIO_SRC_IRQ, NULL);
+
+ if (fr_eof(fp) == FC_EOF_T &&
+ (ntoh24(fh->fh_f_ctl) & (FC_FC_LAST_SEQ | FC_FC_END_SEQ)) ==
+ (FC_FC_LAST_SEQ | FC_FC_END_SEQ)) {
+ if (job->reply->reply_payload_rcv_len >
+ job->reply_payload.payload_len)
+ job->reply->reply_payload_rcv_len =
+ job->reply_payload.payload_len;
+ job->reply->result = 0;
+ job->state_flags |= FC_RQST_STATE_DONE;
+ job->job_done(job);
+ kfree(info);
+ }
+ fc_frame_free(fp);
+ mutex_unlock(&lport->lp_mutex);
+}
+
+/**
+ * fc_lport_els_request() - Send ELS passthrough request
+ * @job: The BSG Passthrough job
+ * @lport: The local port sending the request
+ * @did: The destination port id
+ *
+ * Locking Note: The lport lock is expected to be held before calling
+ * this routine.
+ */
+static int fc_lport_els_request(struct fc_bsg_job *job,
+ struct fc_lport *lport,
+ u32 did, u32 tov)
+{
+ struct fc_bsg_info *info;
+ struct fc_frame *fp;
+ struct fc_frame_header *fh;
+ char *pp;
+ int len;
+
+ fp = fc_frame_alloc(lport, job->request_payload.payload_len);
+ if (!fp)
+ return -ENOMEM;
+
+ len = job->request_payload.payload_len;
+ pp = fc_frame_payload_get(fp, len);
+
+ sg_copy_to_buffer(job->request_payload.sg_list,
+ job->request_payload.sg_cnt,
+ pp, len);
+
+ fh = fc_frame_header_get(fp);
+ fh->fh_r_ctl = FC_RCTL_ELS_REQ;
+ hton24(fh->fh_d_id, did);
+ hton24(fh->fh_s_id, fc_host_port_id(lport->host));
+ fh->fh_type = FC_TYPE_ELS;
+ hton24(fh->fh_f_ctl, FC_FC_FIRST_SEQ |
+ FC_FC_END_SEQ | FC_FC_SEQ_INIT);
+ fh->fh_cs_ctl = 0;
+ fh->fh_df_ctl = 0;
+ fh->fh_parm_offset = 0;
+
+ info = kzalloc(sizeof(struct fc_bsg_info), GFP_KERNEL);
+ if (!info) {
+ fc_frame_free(fp);
+ return -ENOMEM;
+ }
+
+ info->job = job;
+ info->lport = lport;
+ info->rsp_code = ELS_LS_ACC;
+ info->nents = job->reply_payload.sg_cnt;
+ info->sg = job->reply_payload.sg_list;
+
+ if (!lport->tt.exch_seq_send(lport, fp, fc_lport_bsg_resp,
+ NULL, info, tov))
+ return -ECOMM;
+ return 0;
+}
+
+/**
+ * fc_lport_ct_request() - Send CT Passthrough request
+ * @job: The BSG Passthrough job
+ * @lport: The local port sending the request
+ * @did: The destination FC-ID
+ * @tov: The timeout period to wait for the response
+ *
+ * Locking Note: The lport lock is expected to be held before calling
+ * this routine.
+ */
+static int fc_lport_ct_request(struct fc_bsg_job *job,
+ struct fc_lport *lport, u32 did, u32 tov)
+{
+ struct fc_bsg_info *info;
+ struct fc_frame *fp;
+ struct fc_frame_header *fh;
+ struct fc_ct_req *ct;
+ size_t len;
+
+ fp = fc_frame_alloc(lport, sizeof(struct fc_ct_hdr) +
+ job->request_payload.payload_len);
+ if (!fp)
+ return -ENOMEM;
+
+ len = job->request_payload.payload_len;
+ ct = fc_frame_payload_get(fp, len);
+
+ sg_copy_to_buffer(job->request_payload.sg_list,
+ job->request_payload.sg_cnt,
+ ct, len);
+
+ fh = fc_frame_header_get(fp);
+ fh->fh_r_ctl = FC_RCTL_DD_UNSOL_CTL;
+ hton24(fh->fh_d_id, did);
+ hton24(fh->fh_s_id, fc_host_port_id(lport->host));
+ fh->fh_type = FC_TYPE_CT;
+ hton24(fh->fh_f_ctl, FC_FC_FIRST_SEQ |
+ FC_FC_END_SEQ | FC_FC_SEQ_INIT);
+ fh->fh_cs_ctl = 0;
+ fh->fh_df_ctl = 0;
+ fh->fh_parm_offset = 0;
+
+ info = kzalloc(sizeof(struct fc_bsg_info), GFP_KERNEL);
+ if (!info) {
+ fc_frame_free(fp);
+ return -ENOMEM;
+ }
+
+ info->job = job;
+ info->lport = lport;
+ info->rsp_code = FC_FS_ACC;
+ info->nents = job->reply_payload.sg_cnt;
+ info->sg = job->reply_payload.sg_list;
+
+ if (!lport->tt.exch_seq_send(lport, fp, fc_lport_bsg_resp,
+ NULL, info, tov))
+ return -ECOMM;
+ return 0;
+}
+
+/**
+ * fc_lport_bsg_request() - The common entry point for sending
+ * FC Passthrough requests
+ * @job: The BSG passthrough job
+ */
+int fc_lport_bsg_request(struct fc_bsg_job *job)
+{
+ struct request *rsp = job->req->next_rq;
+ struct Scsi_Host *shost = job->shost;
+ struct fc_lport *lport = shost_priv(shost);
+ struct fc_rport *rport;
+ struct fc_rport_priv *rdata;
+ int rc = -EINVAL;
+ u32 did;
+
+ job->reply->reply_payload_rcv_len = 0;
+ rsp->resid_len = job->reply_payload.payload_len;
+
+ mutex_lock(&lport->lp_mutex);
+
+ switch (job->request->msgcode) {
+ case FC_BSG_RPT_ELS:
+ rport = job->rport;
+ if (!rport)
+ break;
+
+ rdata = rport->dd_data;
+ rc = fc_lport_els_request(job, lport, rport->port_id,
+ rdata->e_d_tov);
+ break;
+
+ case FC_BSG_RPT_CT:
+ rport = job->rport;
+ if (!rport)
+ break;
+
+ rdata = rport->dd_data;
+ rc = fc_lport_ct_request(job, lport, rport->port_id,
+ rdata->e_d_tov);
+ break;
+
+ case FC_BSG_HST_CT:
+ did = ntoh24(job->request->rqst_data.h_ct.port_id);
+ if (did == FC_FID_DIR_SERV)
+ rdata = lport->dns_rdata;
+ else
+ rdata = lport->tt.rport_lookup(lport, did);
+
+ if (!rdata)
+ break;
+
+ rc = fc_lport_ct_request(job, lport, did, rdata->e_d_tov);
+ break;
+
+ case FC_BSG_HST_ELS_NOLOGIN:
+ did = ntoh24(job->request->rqst_data.h_els.port_id);
+ rc = fc_lport_els_request(job, lport, did, lport->e_d_tov);
+ break;
+ }
+
+ mutex_unlock(&lport->lp_mutex);
+ return rc;
+}
+EXPORT_SYMBOL(fc_lport_bsg_request);
diff --git a/drivers/scsi/libfc/fc_npiv.c b/drivers/scsi/libfc/fc_npiv.c
new file mode 100644
index 0000000..c68f6c7
--- /dev/null
+++ b/drivers/scsi/libfc/fc_npiv.c
@@ -0,0 +1,161 @@
+/*
+ * Copyright(c) 2009 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Maintained at www.Open-FCoE.org
+ */
+
+/*
+ * NPIV VN_Port helper functions for libfc
+ */
+
+#include <scsi/libfc.h>
+
+/**
+ * fc_vport_create() - Create a new NPIV vport instance
+ * @vport: fc_vport structure from scsi_transport_fc
+ * @privsize: driver private data size to allocate along with the Scsi_Host
+ */
+
+struct fc_lport *libfc_vport_create(struct fc_vport *vport, int privsize)
+{
+ struct Scsi_Host *shost = vport_to_shost(vport);
+ struct fc_lport *n_port = shost_priv(shost);
+ struct fc_lport *vn_port;
+
+ vn_port = libfc_host_alloc(shost->hostt, privsize);
+ if (!vn_port)
+ goto err_out;
+ if (fc_exch_mgr_list_clone(n_port, vn_port))
+ goto err_put;
+
+ vn_port->vport = vport;
+ vport->dd_data = vn_port;
+
+ mutex_lock(&n_port->lp_mutex);
+ list_add_tail(&vn_port->list, &n_port->vports);
+ mutex_unlock(&n_port->lp_mutex);
+
+ return vn_port;
+
+err_put:
+ scsi_host_put(vn_port->host);
+err_out:
+ return NULL;
+}
+EXPORT_SYMBOL(libfc_vport_create);
+
+/**
+ * fc_vport_id_lookup() - find NPIV lport that matches a given fabric ID
+ * @n_port: Top level N_Port which may have multiple NPIV VN_Ports
+ * @port_id: Fabric ID to find a match for
+ *
+ * Returns: matching lport pointer or NULL if there is no match
+ */
+struct fc_lport *fc_vport_id_lookup(struct fc_lport *n_port, u32 port_id)
+{
+ struct fc_lport *lport = NULL;
+ struct fc_lport *vn_port;
+
+ if (fc_host_port_id(n_port->host) == port_id)
+ return n_port;
+
+ mutex_lock(&n_port->lp_mutex);
+ list_for_each_entry(vn_port, &n_port->vports, list) {
+ if (fc_host_port_id(vn_port->host) == port_id) {
+ lport = vn_port;
+ break;
+ }
+ }
+ mutex_unlock(&n_port->lp_mutex);
+
+ return lport;
+}
+
+/*
+ * When setting the link state of vports during an lport state change, it's
+ * necessary to hold the lp_mutex of both the N_Port and the VN_Port.
+ * This tells the lockdep engine to treat the nested locking of the VN_Port
+ * as a different lock class.
+ */
+enum libfc_lport_mutex_class {
+ LPORT_MUTEX_NORMAL = 0,
+ LPORT_MUTEX_VN_PORT = 1,
+};
+
+/**
+ * __fc_vport_setlink() - update link and status on a VN_Port
+ * @n_port: parent N_Port
+ * @vn_port: VN_Port to update
+ *
+ * Locking: must be called with both the N_Port and VN_Port lp_mutex held
+ */
+static void __fc_vport_setlink(struct fc_lport *n_port,
+ struct fc_lport *vn_port)
+{
+ struct fc_vport *vport = vn_port->vport;
+
+ if (vn_port->state == LPORT_ST_DISABLED)
+ return;
+
+ if (n_port->state == LPORT_ST_READY) {
+ if (n_port->npiv_enabled) {
+ fc_vport_set_state(vport, FC_VPORT_INITIALIZING);
+ __fc_linkup(vn_port);
+ } else {
+ fc_vport_set_state(vport, FC_VPORT_NO_FABRIC_SUPP);
+ __fc_linkdown(vn_port);
+ }
+ } else {
+ fc_vport_set_state(vport, FC_VPORT_LINKDOWN);
+ __fc_linkdown(vn_port);
+ }
+}
+
+/**
+ * fc_vport_setlink() - update link and status on a VN_Port
+ * @vn_port: virtual port to update
+ */
+void fc_vport_setlink(struct fc_lport *vn_port)
+{
+ struct fc_vport *vport = vn_port->vport;
+ struct Scsi_Host *shost = vport_to_shost(vport);
+ struct fc_lport *n_port = shost_priv(shost);
+
+ mutex_lock(&n_port->lp_mutex);
+ mutex_lock_nested(&vn_port->lp_mutex, LPORT_MUTEX_VN_PORT);
+ __fc_vport_setlink(n_port, vn_port);
+ mutex_unlock(&vn_port->lp_mutex);
+ mutex_unlock(&n_port->lp_mutex);
+}
+EXPORT_SYMBOL(fc_vport_setlink);
+
+/**
+ * fc_vports_linkchange() - change the link state of all vports
+ * @n_port: Parent N_Port that has changed state
+ *
+ * Locking: called with the n_port lp_mutex held
+ */
+void fc_vports_linkchange(struct fc_lport *n_port)
+{
+ struct fc_lport *vn_port;
+
+ list_for_each_entry(vn_port, &n_port->vports, list) {
+ mutex_lock_nested(&vn_port->lp_mutex, LPORT_MUTEX_VN_PORT);
+ __fc_vport_setlink(n_port, vn_port);
+ mutex_unlock(&vn_port->lp_mutex);
+ }
+}
+
diff --git a/drivers/scsi/libfc/fc_rport.c b/drivers/scsi/libfc/fc_rport.c
index 03ea674..35ca0e7 100644
--- a/drivers/scsi/libfc/fc_rport.c
+++ b/drivers/scsi/libfc/fc_rport.c
@@ -55,6 +55,8 @@
#include <scsi/libfc.h>
#include <scsi/fc_encode.h>
+#include "fc_libfc.h"
+
struct workqueue_struct *rport_event_queue;
static void fc_rport_enter_plogi(struct fc_rport_priv *);
@@ -86,12 +88,13 @@
[RPORT_ST_LOGO] = "LOGO",
[RPORT_ST_ADISC] = "ADISC",
[RPORT_ST_DELETE] = "Delete",
+ [RPORT_ST_RESTART] = "Restart",
};
/**
- * fc_rport_lookup() - lookup a remote port by port_id
- * @lport: Fibre Channel host port instance
- * @port_id: remote port port_id to match
+ * fc_rport_lookup() - Lookup a remote port by port_id
+ * @lport: The local port to lookup the remote port on
+ * @port_id: The remote port ID to look up
*/
static struct fc_rport_priv *fc_rport_lookup(const struct fc_lport *lport,
u32 port_id)
@@ -99,16 +102,17 @@
struct fc_rport_priv *rdata;
list_for_each_entry(rdata, &lport->disc.rports, peers)
- if (rdata->ids.port_id == port_id &&
- rdata->rp_state != RPORT_ST_DELETE)
+ if (rdata->ids.port_id == port_id)
return rdata;
return NULL;
}
/**
* fc_rport_create() - Create a new remote port
- * @lport: The local port that the new remote port is for
- * @port_id: The port ID for the new remote port
+ * @lport: The local port this remote port will be associated with
+ * @ids: The identifiers for the new remote port
+ *
+ * The remote port will start in the INIT state.
*
* Locking note: must be called with the disc_mutex held.
*/
@@ -147,8 +151,8 @@
}
/**
- * fc_rport_destroy() - free a remote port after last reference is released.
- * @kref: pointer to kref inside struct fc_rport_priv
+ * fc_rport_destroy() - Free a remote port after last reference is released
+ * @kref: The remote port's kref
*/
static void fc_rport_destroy(struct kref *kref)
{
@@ -159,8 +163,8 @@
}
/**
- * fc_rport_state() - return a string for the state the rport is in
- * @rdata: remote port private data
+ * fc_rport_state() - Return a string identifying the remote port's state
+ * @rdata: The remote port
*/
static const char *fc_rport_state(struct fc_rport_priv *rdata)
{
@@ -173,9 +177,9 @@
}
/**
- * fc_set_rport_loss_tmo() - Set the remote port loss timeout in seconds.
- * @rport: Pointer to Fibre Channel remote port structure
- * @timeout: timeout in seconds
+ * fc_set_rport_loss_tmo() - Set the remote port loss timeout
+ * @rport: The remote port that gets a new timeout value
+ * @timeout: The new timeout value (in seconds)
*/
void fc_set_rport_loss_tmo(struct fc_rport *rport, u32 timeout)
{
@@ -187,9 +191,11 @@
EXPORT_SYMBOL(fc_set_rport_loss_tmo);
/**
- * fc_plogi_get_maxframe() - Get max payload from the common service parameters
- * @flp: FLOGI payload structure
- * @maxval: upper limit, may be less than what is in the service parameters
+ * fc_plogi_get_maxframe() - Get the maximum payload from the common service
+ * parameters in a FLOGI frame
+ * @flp: The FLOGI payload
+ * @maxval: The maximum frame size upper limit; this may be less than what
+ * is in the service parameters
*/
static unsigned int fc_plogi_get_maxframe(struct fc_els_flogi *flp,
unsigned int maxval)
@@ -210,9 +216,9 @@
}
/**
- * fc_rport_state_enter() - Change the rport's state
- * @rdata: The rport whose state should change
- * @new: The new state of the rport
+ * fc_rport_state_enter() - Change the state of a remote port
+ * @rdata: The remote port whose state should change
+ * @new: The new state
*
* Locking Note: Called with the rport lock held
*/
@@ -224,17 +230,22 @@
rdata->rp_state = new;
}
+/**
+ * fc_rport_work() - Handler for remote port events in the rport_event_queue
+ * @work: Handle to the remote port being dequeued
+ */
static void fc_rport_work(struct work_struct *work)
{
u32 port_id;
struct fc_rport_priv *rdata =
container_of(work, struct fc_rport_priv, event_work);
- struct fc_rport_libfc_priv *rp;
+ struct fc_rport_libfc_priv *rpriv;
enum fc_rport_event event;
struct fc_lport *lport = rdata->local_port;
struct fc_rport_operations *rport_ops;
struct fc_rport_identifiers ids;
struct fc_rport *rport;
+ int restart = 0;
mutex_lock(&rdata->rp_mutex);
event = rdata->event;
@@ -265,12 +276,12 @@
rport->maxframe_size = rdata->maxframe_size;
rport->supported_classes = rdata->supported_classes;
- rp = rport->dd_data;
- rp->local_port = lport;
- rp->rp_state = rdata->rp_state;
- rp->flags = rdata->flags;
- rp->e_d_tov = rdata->e_d_tov;
- rp->r_a_tov = rdata->r_a_tov;
+ rpriv = rport->dd_data;
+ rpriv->local_port = lport;
+ rpriv->rp_state = rdata->rp_state;
+ rpriv->flags = rdata->flags;
+ rpriv->e_d_tov = rdata->e_d_tov;
+ rpriv->r_a_tov = rdata->r_a_tov;
mutex_unlock(&rdata->rp_mutex);
if (rport_ops && rport_ops->event_callback) {
@@ -287,8 +298,19 @@
mutex_unlock(&rdata->rp_mutex);
if (port_id != FC_FID_DIR_SERV) {
+ /*
+ * We must drop rp_mutex before taking disc_mutex.
+ * Re-evaluate state to allow for restart.
+ * A transition to RESTART state must only happen
+ * while disc_mutex is held and rdata is on the list.
+ */
mutex_lock(&lport->disc.disc_mutex);
- list_del(&rdata->peers);
+ mutex_lock(&rdata->rp_mutex);
+ if (rdata->rp_state == RPORT_ST_RESTART)
+ restart = 1;
+ else
+ list_del(&rdata->peers);
+ mutex_unlock(&rdata->rp_mutex);
mutex_unlock(&lport->disc.disc_mutex);
}
@@ -305,14 +327,20 @@
lport->tt.exch_mgr_reset(lport, port_id, 0);
if (rport) {
- rp = rport->dd_data;
- rp->rp_state = RPORT_ST_DELETE;
+ rpriv = rport->dd_data;
+ rpriv->rp_state = RPORT_ST_DELETE;
mutex_lock(&rdata->rp_mutex);
rdata->rport = NULL;
mutex_unlock(&rdata->rp_mutex);
fc_remote_port_delete(rport);
}
- kref_put(&rdata->kref, lport->tt.rport_destroy);
+ if (restart) {
+ mutex_lock(&rdata->rp_mutex);
+ FC_RPORT_DBG(rdata, "work restart\n");
+ fc_rport_enter_plogi(rdata);
+ mutex_unlock(&rdata->rp_mutex);
+ } else
+ kref_put(&rdata->kref, lport->tt.rport_destroy);
break;
default:
@@ -323,7 +351,7 @@
/**
* fc_rport_login() - Start the remote port login state machine
- * @rdata: private remote port
+ * @rdata: The remote port to be logged in to
*
* Locking Note: Called without the rport lock held. This
* function will hold the rport lock, call an _enter_*
@@ -342,6 +370,12 @@
FC_RPORT_DBG(rdata, "ADISC port\n");
fc_rport_enter_adisc(rdata);
break;
+ case RPORT_ST_RESTART:
+ break;
+ case RPORT_ST_DELETE:
+ FC_RPORT_DBG(rdata, "Restart deleted port\n");
+ fc_rport_state_enter(rdata, RPORT_ST_RESTART);
+ break;
default:
FC_RPORT_DBG(rdata, "Login to port\n");
fc_rport_enter_plogi(rdata);
@@ -353,9 +387,9 @@
}
/**
- * fc_rport_enter_delete() - schedule a remote port to be deleted.
- * @rdata: private remote port
- * @event: event to report as the reason for deletion
+ * fc_rport_enter_delete() - Schedule a remote port to be deleted
+ * @rdata: The remote port to be deleted
+ * @event: The event to report as the reason for deletion
*
* Locking Note: Called with the rport lock held.
*
@@ -382,8 +416,8 @@
}
/**
- * fc_rport_logoff() - Logoff and remove an rport
- * @rdata: private remote port
+ * fc_rport_logoff() - Logoff and remove a remote port
+ * @rdata: The remote port to be logged off of
*
* Locking Note: Called without the rport lock held. This
* function will hold the rport lock, call an _enter_*
@@ -397,26 +431,27 @@
if (rdata->rp_state == RPORT_ST_DELETE) {
FC_RPORT_DBG(rdata, "Port in Delete state, not removing\n");
- mutex_unlock(&rdata->rp_mutex);
goto out;
}
- fc_rport_enter_logo(rdata);
+ if (rdata->rp_state == RPORT_ST_RESTART)
+ FC_RPORT_DBG(rdata, "Port in Restart state, deleting\n");
+ else
+ fc_rport_enter_logo(rdata);
/*
* Change the state to Delete so that we discard
* the response.
*/
fc_rport_enter_delete(rdata, RPORT_EV_STOP);
- mutex_unlock(&rdata->rp_mutex);
-
out:
+ mutex_unlock(&rdata->rp_mutex);
return 0;
}
/**
- * fc_rport_enter_ready() - The rport is ready
- * @rdata: private remote port
+ * fc_rport_enter_ready() - Transition to the RPORT_ST_READY state
+ * @rdata: The remote port that is ready
*
* Locking Note: The rport lock is expected to be held before calling
* this routine.
@@ -433,8 +468,8 @@
}
/**
- * fc_rport_timeout() - Handler for the retry_work timer.
- * @work: The work struct of the fc_rport_priv
+ * fc_rport_timeout() - Handler for the retry_work timer
+ * @work: Handle to the remote port that has timed out
*
* Locking Note: Called without the rport lock held. This
* function will hold the rport lock, call an _enter_*
@@ -466,6 +501,7 @@
case RPORT_ST_READY:
case RPORT_ST_INIT:
case RPORT_ST_DELETE:
+ case RPORT_ST_RESTART:
break;
}
@@ -474,8 +510,8 @@
/**
* fc_rport_error() - Error handler, called once retries have been exhausted
- * @rdata: private remote port
- * @fp: The frame pointer
+ * @rdata: The remote port the error is happened on
+ * @fp: The error code encapsulated in a frame pointer
*
* Locking Note: The rport lock is expected to be held before
* calling this routine
@@ -499,6 +535,7 @@
fc_rport_enter_logo(rdata);
break;
case RPORT_ST_DELETE:
+ case RPORT_ST_RESTART:
case RPORT_ST_READY:
case RPORT_ST_INIT:
break;
@@ -506,9 +543,9 @@
}
/**
- * fc_rport_error_retry() - Error handler when retries are desired
- * @rdata: private remote port data
- * @fp: The frame pointer
+ * fc_rport_error_retry() - Handler for remote port state retries
+ * @rdata: The remote port whose state is to be retried
+ * @fp: The error code encapsulated in a frame pointer
*
* If the error was an exchange timeout retry immediately,
* otherwise wait for E_D_TOV.
@@ -540,10 +577,10 @@
}
/**
- * fc_rport_plogi_recv_resp() - Handle incoming ELS PLOGI response
- * @sp: current sequence in the PLOGI exchange
- * @fp: response frame
- * @rdata_arg: private remote port data
+ * fc_rport_plogi_recv_resp() - Handler for ELS PLOGI responses
+ * @sp: The sequence the PLOGI is on
+ * @fp: The PLOGI response frame
+ * @rdata_arg: The remote port that sent the PLOGI response
*
* Locking Note: This function will be called without the rport lock
* held, but it will lock, call an _enter_* function or fc_rport_error
@@ -606,8 +643,8 @@
}
/**
- * fc_rport_enter_plogi() - Send Port Login (PLOGI) request to peer
- * @rdata: private remote port data
+ * fc_rport_enter_plogi() - Send Port Login (PLOGI) request
+ * @rdata: The remote port to send a PLOGI to
*
* Locking Note: The rport lock is expected to be held before calling
* this routine.
@@ -631,17 +668,18 @@
rdata->e_d_tov = lport->e_d_tov;
if (!lport->tt.elsct_send(lport, rdata->ids.port_id, fp, ELS_PLOGI,
- fc_rport_plogi_resp, rdata, lport->e_d_tov))
- fc_rport_error_retry(rdata, fp);
+ fc_rport_plogi_resp, rdata,
+ 2 * lport->r_a_tov))
+ fc_rport_error_retry(rdata, NULL);
else
kref_get(&rdata->kref);
}
/**
* fc_rport_prli_resp() - Process Login (PRLI) response handler
- * @sp: current sequence in the PRLI exchange
- * @fp: response frame
- * @rdata_arg: private remote port data
+ * @sp: The sequence the PRLI response was on
+ * @fp: The PRLI response frame
+ * @rdata_arg: The remote port that sent the PRLI response
*
* Locking Note: This function will be called without the rport lock
* held, but it will lock, call an _enter_* function or fc_rport_error
@@ -710,10 +748,10 @@
}
/**
- * fc_rport_logo_resp() - Logout (LOGO) response handler
- * @sp: current sequence in the LOGO exchange
- * @fp: response frame
- * @rdata_arg: private remote port data
+ * fc_rport_logo_resp() - Handler for logout (LOGO) responses
+ * @sp: The sequence the LOGO was on
+ * @fp: The LOGO response frame
+ * @rdata_arg: The remote port that sent the LOGO response
*
* Locking Note: This function will be called without the rport lock
* held, but it will lock, call an _enter_* function or fc_rport_error
@@ -756,8 +794,8 @@
}
/**
- * fc_rport_enter_prli() - Send Process Login (PRLI) request to peer
- * @rdata: private remote port data
+ * fc_rport_enter_prli() - Send Process Login (PRLI) request
+ * @rdata: The remote port to send the PRLI request to
*
* Locking Note: The rport lock is expected to be held before calling
* this routine.
@@ -792,17 +830,18 @@
}
if (!lport->tt.elsct_send(lport, rdata->ids.port_id, fp, ELS_PRLI,
- fc_rport_prli_resp, rdata, lport->e_d_tov))
- fc_rport_error_retry(rdata, fp);
+ fc_rport_prli_resp, rdata,
+ 2 * lport->r_a_tov))
+ fc_rport_error_retry(rdata, NULL);
else
kref_get(&rdata->kref);
}
/**
- * fc_rport_els_rtv_resp() - Request Timeout Value response handler
- * @sp: current sequence in the RTV exchange
- * @fp: response frame
- * @rdata_arg: private remote port data
+ * fc_rport_els_rtv_resp() - Handler for Request Timeout Value (RTV) responses
+ * @sp: The sequence the RTV was on
+ * @fp: The RTV response frame
+ * @rdata_arg: The remote port that sent the RTV response
*
* Many targets don't seem to support this.
*
@@ -865,8 +904,8 @@
}
/**
- * fc_rport_enter_rtv() - Send Request Timeout Value (RTV) request to peer
- * @rdata: private remote port data
+ * fc_rport_enter_rtv() - Send Request Timeout Value (RTV) request
+ * @rdata: The remote port to send the RTV request to
*
* Locking Note: The rport lock is expected to be held before calling
* this routine.
@@ -888,15 +927,16 @@
}
if (!lport->tt.elsct_send(lport, rdata->ids.port_id, fp, ELS_RTV,
- fc_rport_rtv_resp, rdata, lport->e_d_tov))
- fc_rport_error_retry(rdata, fp);
+ fc_rport_rtv_resp, rdata,
+ 2 * lport->r_a_tov))
+ fc_rport_error_retry(rdata, NULL);
else
kref_get(&rdata->kref);
}
/**
- * fc_rport_enter_logo() - Send Logout (LOGO) request to peer
- * @rdata: private remote port data
+ * fc_rport_enter_logo() - Send a logout (LOGO) request
+ * @rdata: The remote port to send the LOGO request to
*
* Locking Note: The rport lock is expected to be held before calling
* this routine.
@@ -918,24 +958,25 @@
}
if (!lport->tt.elsct_send(lport, rdata->ids.port_id, fp, ELS_LOGO,
- fc_rport_logo_resp, rdata, lport->e_d_tov))
- fc_rport_error_retry(rdata, fp);
+ fc_rport_logo_resp, rdata,
+ 2 * lport->r_a_tov))
+ fc_rport_error_retry(rdata, NULL);
else
kref_get(&rdata->kref);
}
/**
- * fc_rport_els_adisc_resp() - Address Discovery response handler
- * @sp: current sequence in the ADISC exchange
- * @fp: response frame
- * @rdata_arg: remote port private.
+ * fc_rport_els_adisc_resp() - Handler for Address Discovery (ADISC) responses
+ * @sp: The sequence the ADISC response was on
+ * @fp: The ADISC response frame
+ * @rdata_arg: The remote port that sent the ADISC response
*
* Locking Note: This function will be called without the rport lock
* held, but it will lock, call an _enter_* function or fc_rport_error
* and then unlock the rport.
*/
static void fc_rport_adisc_resp(struct fc_seq *sp, struct fc_frame *fp,
- void *rdata_arg)
+ void *rdata_arg)
{
struct fc_rport_priv *rdata = rdata_arg;
struct fc_els_adisc *adisc;
@@ -983,8 +1024,8 @@
}
/**
- * fc_rport_enter_adisc() - Send Address Discover (ADISC) request to peer
- * @rdata: remote port private data
+ * fc_rport_enter_adisc() - Send Address Discover (ADISC) request
+ * @rdata: The remote port to send the ADISC request to
*
* Locking Note: The rport lock is expected to be held before calling
* this routine.
@@ -1005,17 +1046,18 @@
return;
}
if (!lport->tt.elsct_send(lport, rdata->ids.port_id, fp, ELS_ADISC,
- fc_rport_adisc_resp, rdata, lport->e_d_tov))
- fc_rport_error_retry(rdata, fp);
+ fc_rport_adisc_resp, rdata,
+ 2 * lport->r_a_tov))
+ fc_rport_error_retry(rdata, NULL);
else
kref_get(&rdata->kref);
}
/**
- * fc_rport_recv_adisc_req() - Handle incoming Address Discovery (ADISC) Request
- * @rdata: remote port private
- * @sp: current sequence in the ADISC exchange
- * @in_fp: ADISC request frame
+ * fc_rport_recv_adisc_req() - Handler for Address Discovery (ADISC) requests
+ * @rdata: The remote port that sent the ADISC request
+ * @sp: The sequence the ADISC request was on
+ * @in_fp: The ADISC request frame
*
* Locking Note: Called with the lport and rport locks held.
*/
@@ -1056,10 +1098,82 @@
}
/**
- * fc_rport_recv_els_req() - handle a validated ELS request.
- * @lport: Fibre Channel local port
- * @sp: current sequence in the PLOGI exchange
- * @fp: response frame
+ * fc_rport_recv_rls_req() - Handle received Read Link Status request
+ * @rdata: The remote port that sent the RLS request
+ * @sp: The sequence that the RLS was on
+ * @rx_fp: The PRLI request frame
+ *
+ * Locking Note: The rport lock is expected to be held before calling
+ * this function.
+ */
+static void fc_rport_recv_rls_req(struct fc_rport_priv *rdata,
+ struct fc_seq *sp, struct fc_frame *rx_fp)
+
+{
+ struct fc_lport *lport = rdata->local_port;
+ struct fc_frame *fp;
+ struct fc_exch *ep = fc_seq_exch(sp);
+ struct fc_els_rls *rls;
+ struct fc_els_rls_resp *rsp;
+ struct fc_els_lesb *lesb;
+ struct fc_seq_els_data rjt_data;
+ struct fc_host_statistics *hst;
+ u32 f_ctl;
+
+ FC_RPORT_DBG(rdata, "Received RLS request while in state %s\n",
+ fc_rport_state(rdata));
+
+ rls = fc_frame_payload_get(rx_fp, sizeof(*rls));
+ if (!rls) {
+ rjt_data.reason = ELS_RJT_PROT;
+ rjt_data.explan = ELS_EXPL_INV_LEN;
+ goto out_rjt;
+ }
+
+ fp = fc_frame_alloc(lport, sizeof(*rsp));
+ if (!fp) {
+ rjt_data.reason = ELS_RJT_UNAB;
+ rjt_data.explan = ELS_EXPL_INSUF_RES;
+ goto out_rjt;
+ }
+
+ rsp = fc_frame_payload_get(fp, sizeof(*rsp));
+ memset(rsp, 0, sizeof(*rsp));
+ rsp->rls_cmd = ELS_LS_ACC;
+ lesb = &rsp->rls_lesb;
+ if (lport->tt.get_lesb) {
+ /* get LESB from LLD if it supports it */
+ lport->tt.get_lesb(lport, lesb);
+ } else {
+ fc_get_host_stats(lport->host);
+ hst = &lport->host_stats;
+ lesb->lesb_link_fail = htonl(hst->link_failure_count);
+ lesb->lesb_sync_loss = htonl(hst->loss_of_sync_count);
+ lesb->lesb_sig_loss = htonl(hst->loss_of_signal_count);
+ lesb->lesb_prim_err = htonl(hst->prim_seq_protocol_err_count);
+ lesb->lesb_inv_word = htonl(hst->invalid_tx_word_count);
+ lesb->lesb_inv_crc = htonl(hst->invalid_crc_count);
+ }
+
+ sp = lport->tt.seq_start_next(sp);
+ f_ctl = FC_FC_EX_CTX | FC_FC_LAST_SEQ | FC_FC_END_SEQ;
+ fc_fill_fc_hdr(fp, FC_RCTL_ELS_REP, ep->did, ep->sid,
+ FC_TYPE_ELS, f_ctl, 0);
+ lport->tt.seq_send(lport, sp, fp);
+ goto out;
+
+out_rjt:
+ rjt_data.fp = NULL;
+ lport->tt.seq_els_rsp_send(sp, ELS_LS_RJT, &rjt_data);
+out:
+ fc_frame_free(rx_fp);
+}
+
+/**
+ * fc_rport_recv_els_req() - Handler for validated ELS requests
+ * @lport: The local port that received the ELS request
+ * @sp: The sequence that the ELS request was on
+ * @fp: The ELS request frame
*
* Handle incoming ELS requests that require port login.
* The ELS opcode has already been validated by the caller.
@@ -1117,6 +1231,9 @@
els_data.fp = fp;
lport->tt.seq_els_rsp_send(sp, ELS_REC, &els_data);
break;
+ case ELS_RLS:
+ fc_rport_recv_rls_req(rdata, sp, fp);
+ break;
default:
fc_frame_free(fp); /* can't happen */
break;
@@ -1131,10 +1248,10 @@
}
/**
- * fc_rport_recv_req() - Handle a received ELS request from a rport
- * @sp: current sequence in the PLOGI exchange
- * @fp: response frame
- * @lport: Fibre Channel local port
+ * fc_rport_recv_req() - Handler for requests
+ * @sp: The sequence the request was on
+ * @fp: The request frame
+ * @lport: The local port that received the request
*
* Locking Note: Called with the lport lock held.
*/
@@ -1161,6 +1278,7 @@
case ELS_ADISC:
case ELS_RRQ:
case ELS_REC:
+ case ELS_RLS:
fc_rport_recv_els_req(lport, sp, fp);
break;
default:
@@ -1174,10 +1292,10 @@
}
/**
- * fc_rport_recv_plogi_req() - Handle incoming Port Login (PLOGI) request
- * @lport: local port
- * @sp: current sequence in the PLOGI exchange
- * @fp: PLOGI request frame
+ * fc_rport_recv_plogi_req() - Handler for Port Login (PLOGI) requests
+ * @lport: The local port that received the PLOGI request
+ * @sp: The sequence that the PLOGI request was on
+ * @rx_fp: The PLOGI request frame
*
* Locking Note: The rport lock is held before calling this function.
*/
@@ -1248,6 +1366,7 @@
}
break;
case RPORT_ST_PRLI:
+ case RPORT_ST_RTV:
case RPORT_ST_READY:
case RPORT_ST_ADISC:
FC_RPORT_DBG(rdata, "Received PLOGI in logged-in state %d "
@@ -1255,11 +1374,14 @@
/* XXX TBD - should reset */
break;
case RPORT_ST_DELETE:
- default:
- FC_RPORT_DBG(rdata, "Received PLOGI in unexpected state %d\n",
- rdata->rp_state);
- fc_frame_free(rx_fp);
- goto out;
+ case RPORT_ST_LOGO:
+ case RPORT_ST_RESTART:
+ FC_RPORT_DBG(rdata, "Received PLOGI in state %s - send busy\n",
+ fc_rport_state(rdata));
+ mutex_unlock(&rdata->rp_mutex);
+ rjt_data.reason = ELS_RJT_BUSY;
+ rjt_data.explan = ELS_EXPL_NONE;
+ goto reject;
}
/*
@@ -1295,10 +1417,10 @@
}
/**
- * fc_rport_recv_prli_req() - Handle incoming Process Login (PRLI) request
- * @rdata: private remote port data
- * @sp: current sequence in the PRLI exchange
- * @fp: PRLI request frame
+ * fc_rport_recv_prli_req() - Handler for process login (PRLI) requests
+ * @rdata: The remote port that sent the PRLI request
+ * @sp: The sequence that the PRLI was on
+ * @rx_fp: The PRLI request frame
*
* Locking Note: The rport lock is exected to be held before calling
* this function.
@@ -1402,7 +1524,7 @@
break;
case FC_TYPE_FCP:
fcp_parm = ntohl(rspp->spp_params);
- if (fcp_parm * FCP_SPPF_RETRY)
+ if (fcp_parm & FCP_SPPF_RETRY)
rdata->flags |= FC_RP_FLAGS_RETRY;
rdata->supported_classes = FC_COS_CLASS3;
if (fcp_parm & FCP_SPPF_INIT_FCN)
@@ -1452,10 +1574,10 @@
}
/**
- * fc_rport_recv_prlo_req() - Handle incoming Process Logout (PRLO) request
- * @rdata: private remote port data
- * @sp: current sequence in the PRLO exchange
- * @fp: PRLO request frame
+ * fc_rport_recv_prlo_req() - Handler for process logout (PRLO) requests
+ * @rdata: The remote port that sent the PRLO request
+ * @sp: The sequence that the PRLO was on
+ * @fp: The PRLO request frame
*
* Locking Note: The rport lock is exected to be held before calling
* this function.
@@ -1482,10 +1604,10 @@
}
/**
- * fc_rport_recv_logo_req() - Handle incoming Logout (LOGO) request
- * @lport: local port.
- * @sp: current sequence in the LOGO exchange
- * @fp: LOGO request frame
+ * fc_rport_recv_logo_req() - Handler for logout (LOGO) requests
+ * @lport: The local port that received the LOGO request
+ * @sp: The sequence that the LOGO request was on
+ * @fp: The LOGO request frame
*
* Locking Note: The rport lock is exected to be held before calling
* this function.
@@ -1510,14 +1632,14 @@
FC_RPORT_DBG(rdata, "Received LOGO request while in state %s\n",
fc_rport_state(rdata));
+ fc_rport_enter_delete(rdata, RPORT_EV_LOGO);
+
/*
- * If the remote port was created due to discovery,
- * log back in. It may have seen a stale RSCN about us.
+ * If the remote port was created due to discovery, set state
+ * to log back in. It may have seen a stale RSCN about us.
*/
- if (rdata->rp_state != RPORT_ST_DELETE && rdata->disc_id)
- fc_rport_enter_plogi(rdata);
- else
- fc_rport_enter_delete(rdata, RPORT_EV_LOGO);
+ if (rdata->disc_id)
+ fc_rport_state_enter(rdata, RPORT_ST_RESTART);
mutex_unlock(&rdata->rp_mutex);
} else
FC_RPORT_ID_DBG(lport, sid,
@@ -1526,11 +1648,18 @@
fc_frame_free(fp);
}
+/**
+ * fc_rport_flush_queue() - Flush the rport_event_queue
+ */
static void fc_rport_flush_queue(void)
{
flush_workqueue(rport_event_queue);
}
+/**
+ * fc_rport_init() - Initialize the remote port layer for a local port
+ * @lport: The local port to initialize the remote port layer for
+ */
int fc_rport_init(struct fc_lport *lport)
{
if (!lport->tt.rport_lookup)
@@ -1558,25 +1687,33 @@
}
EXPORT_SYMBOL(fc_rport_init);
-int fc_setup_rport(void)
+/**
+ * fc_setup_rport() - Initialize the rport_event_queue
+ */
+int fc_setup_rport()
{
rport_event_queue = create_singlethread_workqueue("fc_rport_eq");
if (!rport_event_queue)
return -ENOMEM;
return 0;
}
-EXPORT_SYMBOL(fc_setup_rport);
-void fc_destroy_rport(void)
+/**
+ * fc_destroy_rport() - Destroy the rport_event_queue
+ */
+void fc_destroy_rport()
{
destroy_workqueue(rport_event_queue);
}
-EXPORT_SYMBOL(fc_destroy_rport);
+/**
+ * fc_rport_terminate_io() - Stop all outstanding I/O on a remote port
+ * @rport: The remote port whose I/O should be terminated
+ */
void fc_rport_terminate_io(struct fc_rport *rport)
{
- struct fc_rport_libfc_priv *rp = rport->dd_data;
- struct fc_lport *lport = rp->local_port;
+ struct fc_rport_libfc_priv *rpriv = rport->dd_data;
+ struct fc_lport *lport = rpriv->local_port;
lport->tt.exch_mgr_reset(lport, 0, rport->port_id);
lport->tt.exch_mgr_reset(lport, rport->port_id, 0);
diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c
index f1a4246..b7689f3 100644
--- a/drivers/scsi/libiscsi.c
+++ b/drivers/scsi/libiscsi.c
@@ -266,6 +266,88 @@
}
/**
+ * iscsi_check_tmf_restrictions - check if a task is affected by TMF
+ * @task: iscsi task
+ * @opcode: opcode to check for
+ *
+ * During TMF a task has to be checked if it's affected.
+ * All unrelated I/O can be passed through, but I/O to the
+ * affected LUN should be restricted.
+ * If 'fast_abort' is set we won't be sending any I/O to the
+ * affected LUN.
+ * Otherwise the target is waiting for all TTTs to be completed,
+ * so we have to send all outstanding Data-Out PDUs to the target.
+ */
+static int iscsi_check_tmf_restrictions(struct iscsi_task *task, int opcode)
+{
+ struct iscsi_conn *conn = task->conn;
+ struct iscsi_tm *tmf = &conn->tmhdr;
+ unsigned int hdr_lun;
+
+ if (conn->tmf_state == TMF_INITIAL)
+ return 0;
+
+ if ((tmf->opcode & ISCSI_OPCODE_MASK) != ISCSI_OP_SCSI_TMFUNC)
+ return 0;
+
+ switch (ISCSI_TM_FUNC_VALUE(tmf)) {
+ case ISCSI_TM_FUNC_LOGICAL_UNIT_RESET:
+ /*
+ * Allow PDUs for unrelated LUNs
+ */
+ hdr_lun = scsilun_to_int((struct scsi_lun *)tmf->lun);
+ if (hdr_lun != task->sc->device->lun)
+ return 0;
+ /* fall through */
+ case ISCSI_TM_FUNC_TARGET_WARM_RESET:
+ /*
+ * Fail all SCSI cmd PDUs
+ */
+ if (opcode != ISCSI_OP_SCSI_DATA_OUT) {
+ iscsi_conn_printk(KERN_INFO, conn,
+ "task [op %x/%x itt "
+ "0x%x/0x%x] "
+ "rejected.\n",
+ task->hdr->opcode, opcode,
+ task->itt, task->hdr_itt);
+ return -EACCES;
+ }
+ /*
+ * And also all data-out PDUs in response to R2T
+ * if fast_abort is set.
+ */
+ if (conn->session->fast_abort) {
+ iscsi_conn_printk(KERN_INFO, conn,
+ "task [op %x/%x itt "
+ "0x%x/0x%x] fast abort.\n",
+ task->hdr->opcode, opcode,
+ task->itt, task->hdr_itt);
+ return -EACCES;
+ }
+ break;
+ case ISCSI_TM_FUNC_ABORT_TASK:
+ /*
+ * the caller has already checked if the task
+ * they want to abort was in the pending queue so if
+ * we are here the cmd pdu has gone out already, and
+ * we will only hit this for data-outs
+ */
+ if (opcode == ISCSI_OP_SCSI_DATA_OUT &&
+ task->hdr_itt == tmf->rtt) {
+ ISCSI_DBG_SESSION(conn->session,
+ "Preventing task %x/%x from sending "
+ "data-out due to abort task in "
+ "progress\n", task->itt,
+ task->hdr_itt);
+ return -EACCES;
+ }
+ break;
+ }
+
+ return 0;
+}
+
+/**
* iscsi_prep_scsi_cmd_pdu - prep iscsi scsi cmd pdu
* @task: iscsi task
*
@@ -282,6 +364,10 @@
itt_t itt;
int rc;
+ rc = iscsi_check_tmf_restrictions(task, ISCSI_OP_SCSI_CMD);
+ if (rc)
+ return rc;
+
if (conn->session->tt->alloc_pdu) {
rc = conn->session->tt->alloc_pdu(task, ISCSI_OP_SCSI_CMD);
if (rc)
@@ -577,12 +663,12 @@
struct iscsi_session *session = conn->session;
struct iscsi_hdr *hdr = task->hdr;
struct iscsi_nopout *nop = (struct iscsi_nopout *)hdr;
+ uint8_t opcode = hdr->opcode & ISCSI_OPCODE_MASK;
if (conn->session->state == ISCSI_STATE_LOGGING_OUT)
return -ENOTCONN;
- if (hdr->opcode != (ISCSI_OP_LOGIN | ISCSI_OP_IMMEDIATE) &&
- hdr->opcode != (ISCSI_OP_TEXT | ISCSI_OP_IMMEDIATE))
+ if (opcode != ISCSI_OP_LOGIN && opcode != ISCSI_OP_TEXT)
nop->exp_statsn = cpu_to_be32(conn->exp_statsn);
/*
* pre-format CmdSN for outgoing PDU.
@@ -590,9 +676,12 @@
nop->cmdsn = cpu_to_be32(session->cmdsn);
if (hdr->itt != RESERVED_ITT) {
/*
- * TODO: We always use immediate, so we never hit this.
+ * TODO: We always use immediate for normal session pdus.
* If we start to send tmfs or nops as non-immediate then
* we should start checking the cmdsn numbers for mgmt tasks.
+ *
+ * During discovery sessions iscsid sends TEXT as non immediate,
+ * but we always only send one PDU at a time.
*/
if (conn->c_stage == ISCSI_CONN_STARTED &&
!(hdr->opcode & ISCSI_OP_IMMEDIATE)) {
@@ -620,22 +709,28 @@
{
struct iscsi_session *session = conn->session;
struct iscsi_host *ihost = shost_priv(session->host);
+ uint8_t opcode = hdr->opcode & ISCSI_OPCODE_MASK;
struct iscsi_task *task;
itt_t itt;
if (session->state == ISCSI_STATE_TERMINATE)
return NULL;
- if (hdr->opcode == (ISCSI_OP_LOGIN | ISCSI_OP_IMMEDIATE) ||
- hdr->opcode == (ISCSI_OP_TEXT | ISCSI_OP_IMMEDIATE))
+ if (opcode == ISCSI_OP_LOGIN || opcode == ISCSI_OP_TEXT) {
/*
* Login and Text are sent serially, in
* request-followed-by-response sequence.
* Same task can be used. Same ITT must be used.
* Note that login_task is preallocated at conn_create().
*/
+ if (conn->login_task->state != ISCSI_TASK_FREE) {
+ iscsi_conn_printk(KERN_ERR, conn, "Login/Text in "
+ "progress. Cannot start new task.\n");
+ return NULL;
+ }
+
task = conn->login_task;
- else {
+ } else {
if (session->state != ISCSI_STATE_LOGGED_IN)
return NULL;
@@ -1357,6 +1452,7 @@
**/
static int iscsi_data_xmit(struct iscsi_conn *conn)
{
+ struct iscsi_task *task;
int rc = 0;
spin_lock_bh(&conn->session->lock);
@@ -1394,11 +1490,8 @@
/* process pending command queue */
while (!list_empty(&conn->cmdqueue)) {
- if (conn->tmf_state == TMF_QUEUED)
- break;
-
- conn->task = list_entry(conn->cmdqueue.next,
- struct iscsi_task, running);
+ conn->task = list_entry(conn->cmdqueue.next, struct iscsi_task,
+ running);
list_del_init(&conn->task->running);
if (conn->session->state == ISCSI_STATE_LOGGING_OUT) {
fail_scsi_task(conn->task, DID_IMM_RETRY);
@@ -1406,7 +1499,7 @@
}
rc = iscsi_prep_scsi_cmd_pdu(conn->task);
if (rc) {
- if (rc == -ENOMEM) {
+ if (rc == -ENOMEM || rc == -EACCES) {
list_add_tail(&conn->task->running,
&conn->cmdqueue);
conn->task = NULL;
@@ -1428,17 +1521,18 @@
}
while (!list_empty(&conn->requeue)) {
- if (conn->session->fast_abort && conn->tmf_state != TMF_INITIAL)
- break;
-
/*
* we always do fastlogout - conn stop code will clean up.
*/
if (conn->session->state == ISCSI_STATE_LOGGING_OUT)
break;
- conn->task = list_entry(conn->requeue.next,
- struct iscsi_task, running);
+ task = list_entry(conn->requeue.next, struct iscsi_task,
+ running);
+ if (iscsi_check_tmf_restrictions(task, ISCSI_OP_SCSI_DATA_OUT))
+ break;
+
+ conn->task = task;
list_del_init(&conn->task->running);
conn->task->state = ISCSI_TASK_RUNNING;
rc = iscsi_xmit_task(conn);
@@ -1591,7 +1685,7 @@
if (!ihost->workq) {
reason = iscsi_prep_scsi_cmd_pdu(task);
if (reason) {
- if (reason == -ENOMEM) {
+ if (reason == -ENOMEM || reason == -EACCES) {
reason = FAILURE_OOM;
goto prepd_reject;
} else {
@@ -1643,9 +1737,21 @@
}
EXPORT_SYMBOL_GPL(iscsi_queuecommand);
-int iscsi_change_queue_depth(struct scsi_device *sdev, int depth)
+int iscsi_change_queue_depth(struct scsi_device *sdev, int depth, int reason)
{
- scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), depth);
+ switch (reason) {
+ case SCSI_QDEPTH_DEFAULT:
+ scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), depth);
+ break;
+ case SCSI_QDEPTH_QFULL:
+ scsi_track_queue_full(sdev, depth);
+ break;
+ case SCSI_QDEPTH_RAMP_UP:
+ scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), depth);
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
return sdev->queue_depth;
}
EXPORT_SYMBOL_GPL(iscsi_change_queue_depth);
@@ -1660,72 +1766,6 @@
}
EXPORT_SYMBOL_GPL(iscsi_target_alloc);
-void iscsi_session_recovery_timedout(struct iscsi_cls_session *cls_session)
-{
- struct iscsi_session *session = cls_session->dd_data;
-
- spin_lock_bh(&session->lock);
- if (session->state != ISCSI_STATE_LOGGED_IN) {
- session->state = ISCSI_STATE_RECOVERY_FAILED;
- if (session->leadconn)
- wake_up(&session->leadconn->ehwait);
- }
- spin_unlock_bh(&session->lock);
-}
-EXPORT_SYMBOL_GPL(iscsi_session_recovery_timedout);
-
-int iscsi_eh_target_reset(struct scsi_cmnd *sc)
-{
- struct iscsi_cls_session *cls_session;
- struct iscsi_session *session;
- struct iscsi_conn *conn;
-
- cls_session = starget_to_session(scsi_target(sc->device));
- session = cls_session->dd_data;
- conn = session->leadconn;
-
- mutex_lock(&session->eh_mutex);
- spin_lock_bh(&session->lock);
- if (session->state == ISCSI_STATE_TERMINATE) {
-failed:
- ISCSI_DBG_EH(session,
- "failing target reset: Could not log back into "
- "target [age %d]\n",
- session->age);
- spin_unlock_bh(&session->lock);
- mutex_unlock(&session->eh_mutex);
- return FAILED;
- }
-
- spin_unlock_bh(&session->lock);
- mutex_unlock(&session->eh_mutex);
- /*
- * we drop the lock here but the leadconn cannot be destoyed while
- * we are in the scsi eh
- */
- iscsi_conn_failure(conn, ISCSI_ERR_CONN_FAILED);
-
- ISCSI_DBG_EH(session, "wait for relogin\n");
- wait_event_interruptible(conn->ehwait,
- session->state == ISCSI_STATE_TERMINATE ||
- session->state == ISCSI_STATE_LOGGED_IN ||
- session->state == ISCSI_STATE_RECOVERY_FAILED);
- if (signal_pending(current))
- flush_signals(current);
-
- mutex_lock(&session->eh_mutex);
- spin_lock_bh(&session->lock);
- if (session->state == ISCSI_STATE_LOGGED_IN) {
- ISCSI_DBG_EH(session,
- "target reset succeeded\n");
- } else
- goto failed;
- spin_unlock_bh(&session->lock);
- mutex_unlock(&session->eh_mutex);
- return SUCCESS;
-}
-EXPORT_SYMBOL_GPL(iscsi_eh_target_reset);
-
static void iscsi_tmf_timedout(unsigned long data)
{
struct iscsi_conn *conn = (struct iscsi_conn *)data;
@@ -2108,6 +2148,7 @@
spin_lock_bh(&session->lock);
fail_scsi_task(task, DID_ABORT);
conn->tmf_state = TMF_INITIAL;
+ memset(hdr, 0, sizeof(*hdr));
spin_unlock_bh(&session->lock);
iscsi_start_tx(conn);
goto success_unlocked;
@@ -2118,6 +2159,7 @@
case TMF_NOT_FOUND:
if (!sc->SCp.ptr) {
conn->tmf_state = TMF_INITIAL;
+ memset(hdr, 0, sizeof(*hdr));
/* task completed before tmf abort response */
ISCSI_DBG_EH(session, "sc completed while abort in "
"progress\n");
@@ -2212,6 +2254,7 @@
iscsi_suspend_tx(conn);
spin_lock_bh(&session->lock);
+ memset(hdr, 0, sizeof(*hdr));
fail_scsi_tasks(conn, sc->device->lun, DID_ERROR);
conn->tmf_state = TMF_INITIAL;
spin_unlock_bh(&session->lock);
@@ -2229,6 +2272,172 @@
}
EXPORT_SYMBOL_GPL(iscsi_eh_device_reset);
+void iscsi_session_recovery_timedout(struct iscsi_cls_session *cls_session)
+{
+ struct iscsi_session *session = cls_session->dd_data;
+
+ spin_lock_bh(&session->lock);
+ if (session->state != ISCSI_STATE_LOGGED_IN) {
+ session->state = ISCSI_STATE_RECOVERY_FAILED;
+ if (session->leadconn)
+ wake_up(&session->leadconn->ehwait);
+ }
+ spin_unlock_bh(&session->lock);
+}
+EXPORT_SYMBOL_GPL(iscsi_session_recovery_timedout);
+
+/**
+ * iscsi_eh_session_reset - drop session and attempt relogin
+ * @sc: scsi command
+ *
+ * This function will wait for a relogin, session termination from
+ * userspace, or a recovery/replacement timeout.
+ */
+static int iscsi_eh_session_reset(struct scsi_cmnd *sc)
+{
+ struct iscsi_cls_session *cls_session;
+ struct iscsi_session *session;
+ struct iscsi_conn *conn;
+
+ cls_session = starget_to_session(scsi_target(sc->device));
+ session = cls_session->dd_data;
+ conn = session->leadconn;
+
+ mutex_lock(&session->eh_mutex);
+ spin_lock_bh(&session->lock);
+ if (session->state == ISCSI_STATE_TERMINATE) {
+failed:
+ ISCSI_DBG_EH(session,
+ "failing session reset: Could not log back into "
+ "%s, %s [age %d]\n", session->targetname,
+ conn->persistent_address, session->age);
+ spin_unlock_bh(&session->lock);
+ mutex_unlock(&session->eh_mutex);
+ return FAILED;
+ }
+
+ spin_unlock_bh(&session->lock);
+ mutex_unlock(&session->eh_mutex);
+ /*
+ * we drop the lock here but the leadconn cannot be destoyed while
+ * we are in the scsi eh
+ */
+ iscsi_conn_failure(conn, ISCSI_ERR_CONN_FAILED);
+
+ ISCSI_DBG_EH(session, "wait for relogin\n");
+ wait_event_interruptible(conn->ehwait,
+ session->state == ISCSI_STATE_TERMINATE ||
+ session->state == ISCSI_STATE_LOGGED_IN ||
+ session->state == ISCSI_STATE_RECOVERY_FAILED);
+ if (signal_pending(current))
+ flush_signals(current);
+
+ mutex_lock(&session->eh_mutex);
+ spin_lock_bh(&session->lock);
+ if (session->state == ISCSI_STATE_LOGGED_IN) {
+ ISCSI_DBG_EH(session,
+ "session reset succeeded for %s,%s\n",
+ session->targetname, conn->persistent_address);
+ } else
+ goto failed;
+ spin_unlock_bh(&session->lock);
+ mutex_unlock(&session->eh_mutex);
+ return SUCCESS;
+}
+
+static void iscsi_prep_tgt_reset_pdu(struct scsi_cmnd *sc, struct iscsi_tm *hdr)
+{
+ memset(hdr, 0, sizeof(*hdr));
+ hdr->opcode = ISCSI_OP_SCSI_TMFUNC | ISCSI_OP_IMMEDIATE;
+ hdr->flags = ISCSI_TM_FUNC_TARGET_WARM_RESET & ISCSI_FLAG_TM_FUNC_MASK;
+ hdr->flags |= ISCSI_FLAG_CMD_FINAL;
+ hdr->rtt = RESERVED_ITT;
+}
+
+/**
+ * iscsi_eh_target_reset - reset target
+ * @sc: scsi command
+ *
+ * This will attempt to send a warm target reset. If that fails
+ * then we will drop the session and attempt ERL0 recovery.
+ */
+int iscsi_eh_target_reset(struct scsi_cmnd *sc)
+{
+ struct iscsi_cls_session *cls_session;
+ struct iscsi_session *session;
+ struct iscsi_conn *conn;
+ struct iscsi_tm *hdr;
+ int rc = FAILED;
+
+ cls_session = starget_to_session(scsi_target(sc->device));
+ session = cls_session->dd_data;
+
+ ISCSI_DBG_EH(session, "tgt Reset [sc %p tgt %s]\n", sc,
+ session->targetname);
+
+ mutex_lock(&session->eh_mutex);
+ spin_lock_bh(&session->lock);
+ /*
+ * Just check if we are not logged in. We cannot check for
+ * the phase because the reset could come from a ioctl.
+ */
+ if (!session->leadconn || session->state != ISCSI_STATE_LOGGED_IN)
+ goto unlock;
+ conn = session->leadconn;
+
+ /* only have one tmf outstanding at a time */
+ if (conn->tmf_state != TMF_INITIAL)
+ goto unlock;
+ conn->tmf_state = TMF_QUEUED;
+
+ hdr = &conn->tmhdr;
+ iscsi_prep_tgt_reset_pdu(sc, hdr);
+
+ if (iscsi_exec_task_mgmt_fn(conn, hdr, session->age,
+ session->tgt_reset_timeout)) {
+ rc = FAILED;
+ goto unlock;
+ }
+
+ switch (conn->tmf_state) {
+ case TMF_SUCCESS:
+ break;
+ case TMF_TIMEDOUT:
+ spin_unlock_bh(&session->lock);
+ iscsi_conn_failure(conn, ISCSI_ERR_CONN_FAILED);
+ goto done;
+ default:
+ conn->tmf_state = TMF_INITIAL;
+ goto unlock;
+ }
+
+ rc = SUCCESS;
+ spin_unlock_bh(&session->lock);
+
+ iscsi_suspend_tx(conn);
+
+ spin_lock_bh(&session->lock);
+ memset(hdr, 0, sizeof(*hdr));
+ fail_scsi_tasks(conn, -1, DID_ERROR);
+ conn->tmf_state = TMF_INITIAL;
+ spin_unlock_bh(&session->lock);
+
+ iscsi_start_tx(conn);
+ goto done;
+
+unlock:
+ spin_unlock_bh(&session->lock);
+done:
+ ISCSI_DBG_EH(session, "tgt %s reset result = %s\n", session->targetname,
+ rc == SUCCESS ? "SUCCESS" : "FAILED");
+ mutex_unlock(&session->eh_mutex);
+
+ if (rc == FAILED)
+ rc = iscsi_eh_session_reset(sc);
+ return rc;
+}
+EXPORT_SYMBOL_GPL(iscsi_eh_target_reset);
+
/*
* Pre-allocate a pool of @max items of @item_size. By default, the pool
* should be accessed via kfifo_{get,put} on q->queue.
@@ -2495,6 +2704,7 @@
session->host = shost;
session->state = ISCSI_STATE_FREE;
session->fast_abort = 1;
+ session->tgt_reset_timeout = 30;
session->lu_reset_timeout = 15;
session->abort_timeout = 10;
session->scsi_cmds_max = scsi_cmds;
@@ -2856,6 +3066,7 @@
spin_lock_bh(&session->lock);
fail_scsi_tasks(conn, -1, DID_TRANSPORT_DISRUPTED);
fail_mgmt_tasks(session, conn);
+ memset(&conn->tmhdr, 0, sizeof(conn->tmhdr));
spin_unlock_bh(&session->lock);
mutex_unlock(&session->eh_mutex);
}
@@ -2932,6 +3143,9 @@
case ISCSI_PARAM_LU_RESET_TMO:
sscanf(buf, "%d", &session->lu_reset_timeout);
break;
+ case ISCSI_PARAM_TGT_RESET_TMO:
+ sscanf(buf, "%d", &session->tgt_reset_timeout);
+ break;
case ISCSI_PARAM_PING_TMO:
sscanf(buf, "%d", &conn->ping_timeout);
break;
@@ -3031,6 +3245,9 @@
case ISCSI_PARAM_LU_RESET_TMO:
len = sprintf(buf, "%d\n", session->lu_reset_timeout);
break;
+ case ISCSI_PARAM_TGT_RESET_TMO:
+ len = sprintf(buf, "%d\n", session->tgt_reset_timeout);
+ break;
case ISCSI_PARAM_INITIAL_R2T_EN:
len = sprintf(buf, "%d\n", session->initial_r2t_en);
break;
diff --git a/drivers/scsi/libiscsi_tcp.c b/drivers/scsi/libiscsi_tcp.c
index 2e0746d..ca25ee5 100644
--- a/drivers/scsi/libiscsi_tcp.c
+++ b/drivers/scsi/libiscsi_tcp.c
@@ -1004,7 +1004,7 @@
* iscsi_tcp_task_xmit - xmit normal PDU task
* @task: iscsi command task
*
- * We're expected to return 0 when everything was transmitted succesfully,
+ * We're expected to return 0 when everything was transmitted successfully,
* -EAGAIN if there's still data in the queue, or != 0 for any other kind
* of error.
*/
diff --git a/drivers/scsi/libsas/sas_scsi_host.c b/drivers/scsi/libsas/sas_scsi_host.c
index 1c558d3..14b1319 100644
--- a/drivers/scsi/libsas/sas_scsi_host.c
+++ b/drivers/scsi/libsas/sas_scsi_host.c
@@ -820,10 +820,14 @@
ata_port_disable(dev->sata_dev.ap);
}
-int sas_change_queue_depth(struct scsi_device *scsi_dev, int new_depth)
+int sas_change_queue_depth(struct scsi_device *scsi_dev, int new_depth,
+ int reason)
{
int res = min(new_depth, SAS_MAX_QD);
+ if (reason != SCSI_QDEPTH_DEFAULT)
+ return -EOPNOTSUPP;
+
if (scsi_dev->tagged_supported)
scsi_adjust_queue_depth(scsi_dev, scsi_get_tag_type(scsi_dev),
res);
diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
index aa10f79..1cc23a6 100644
--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h
@@ -109,7 +109,8 @@
struct lpfc_dmabuf dbuf;
uint32_t size;
uint32_t tag;
- struct lpfc_rcqe rcqe;
+ struct lpfc_cq_event cq_event;
+ unsigned long time_stamp;
};
/* Priority bit. Set value to exceed low water mark in lpfc_mem. */
@@ -201,6 +202,7 @@
uint32_t elsRcvLIRR;
uint32_t elsRcvRPS;
uint32_t elsRcvRPL;
+ uint32_t elsRcvRRQ;
uint32_t elsXmitFLOGI;
uint32_t elsXmitFDISC;
uint32_t elsXmitPLOGI;
@@ -289,8 +291,8 @@
uint16_t vpi;
uint16_t vfi;
- uint8_t vfi_state;
-#define LPFC_VFI_REGISTERED 0x1
+ uint8_t vpi_state;
+#define LPFC_VPI_REGISTERED 0x1
uint32_t fc_flag; /* FC flags */
/* Several of these flags are HBA centric and should be moved to
@@ -405,6 +407,7 @@
uint8_t stat_data_enabled;
uint8_t stat_data_blocked;
struct list_head rcv_buffer_list;
+ unsigned long rcv_buffer_time_stamp;
uint32_t vport_flag;
#define STATIC_VPORT 1
};
@@ -527,13 +530,16 @@
#define HBA_ERATT_HANDLED 0x1 /* This flag is set when eratt handled */
#define DEFER_ERATT 0x2 /* Deferred error attention in progress */
#define HBA_FCOE_SUPPORT 0x4 /* HBA function supports FCOE */
-#define HBA_RECEIVE_BUFFER 0x8 /* Rcv buffer posted to worker thread */
+#define HBA_SP_QUEUE_EVT 0x8 /* Slow-path qevt posted to worker thread*/
#define HBA_POST_RECEIVE_BUFFER 0x10 /* Rcv buffers need to be posted */
#define FCP_XRI_ABORT_EVENT 0x20
#define ELS_XRI_ABORT_EVENT 0x40
#define ASYNC_EVENT 0x80
#define LINK_DISABLED 0x100 /* Link disabled by user */
#define FCF_DISC_INPROGRESS 0x200 /* FCF discovery in progress */
+#define HBA_FIP_SUPPORT 0x400 /* FIP support in HBA */
+#define HBA_AER_ENABLED 0x800 /* AER enabled with HBA */
+ uint32_t fcp_ring_in_use; /* When polling test if intr-hndlr active*/
struct lpfc_dmabuf slim2p;
MAILBOX_t *mbox;
@@ -551,6 +557,7 @@
uint8_t fc_linkspeed; /* Link speed after last READ_LA */
uint32_t fc_eventTag; /* event tag for link attention */
+ uint32_t link_events;
/* These fields used to be binfo */
uint32_t fc_pref_DID; /* preferred D_ID */
@@ -604,8 +611,8 @@
uint32_t cfg_enable_hba_reset;
uint32_t cfg_enable_hba_heartbeat;
uint32_t cfg_enable_bg;
- uint32_t cfg_enable_fip;
uint32_t cfg_log_verbose;
+ uint32_t cfg_aer_support;
lpfc_vpd_t vpd; /* vital product data */
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index e1a30a1..91542f7 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -23,12 +23,14 @@
#include <linux/delay.h>
#include <linux/pci.h>
#include <linux/interrupt.h>
+#include <linux/aer.h>
#include <scsi/scsi.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_tcq.h>
#include <scsi/scsi_transport_fc.h>
+#include <scsi/fc/fc_fs.h>
#include "lpfc_hw4.h"
#include "lpfc_hw.h"
@@ -98,6 +100,28 @@
return snprintf(buf, PAGE_SIZE, LPFC_MODULE_DESC "\n");
}
+/**
+ * lpfc_enable_fip_show - Return the fip mode of the HBA
+ * @dev: class unused variable.
+ * @attr: device attribute, not used.
+ * @buf: on return contains the module description text.
+ *
+ * Returns: size of formatted string.
+ **/
+static ssize_t
+lpfc_enable_fip_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(dev);
+ struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
+ struct lpfc_hba *phba = vport->phba;
+
+ if (phba->hba_flag & HBA_FIP_SUPPORT)
+ return snprintf(buf, PAGE_SIZE, "1\n");
+ else
+ return snprintf(buf, PAGE_SIZE, "0\n");
+}
+
static ssize_t
lpfc_bg_info_show(struct device *dev, struct device_attribute *attr,
char *buf)
@@ -654,7 +678,7 @@
* Notes:
* Assumes any error from lpfc_selective_reset() will be negative.
* If lpfc_selective_reset() returns zero then the length of the buffer
- * is returned which indicates succcess
+ * is returned which indicates success
*
* Returns:
* -EINVAL if the buffer does not contain the string "selective"
@@ -762,9 +786,15 @@
} else if (strncmp(buf, "offline", sizeof("offline") - 1) == 0)
status = lpfc_do_offline(phba, LPFC_EVT_OFFLINE);
else if (strncmp(buf, "warm", sizeof("warm") - 1) == 0)
- status = lpfc_do_offline(phba, LPFC_EVT_WARM_START);
+ if (phba->sli_rev == LPFC_SLI_REV4)
+ return -EINVAL;
+ else
+ status = lpfc_do_offline(phba, LPFC_EVT_WARM_START);
else if (strncmp(buf, "error", sizeof("error") - 1) == 0)
- status = lpfc_do_offline(phba, LPFC_EVT_KILL);
+ if (phba->sli_rev == LPFC_SLI_REV4)
+ return -EINVAL;
+ else
+ status = lpfc_do_offline(phba, LPFC_EVT_KILL);
else
return -EINVAL;
@@ -1126,6 +1156,9 @@
if ((val & 0x3) != val)
return -EINVAL;
+ if (phba->sli_rev == LPFC_SLI_REV4)
+ val = 0;
+
spin_lock_irq(&phba->hbalock);
old_val = phba->cfg_poll;
@@ -1589,6 +1622,7 @@
static DEVICE_ATTR(menlo_mgmt_mode, S_IRUGO, lpfc_mlomgmt_show, NULL);
static DEVICE_ATTR(nport_evt_cnt, S_IRUGO, lpfc_nport_evt_cnt_show, NULL);
static DEVICE_ATTR(lpfc_drvr_version, S_IRUGO, lpfc_drvr_version_show, NULL);
+static DEVICE_ATTR(lpfc_enable_fip, S_IRUGO, lpfc_enable_fip_show, NULL);
static DEVICE_ATTR(board_mode, S_IRUGO | S_IWUSR,
lpfc_board_mode_show, lpfc_board_mode_store);
static DEVICE_ATTR(issue_reset, S_IWUSR, NULL, lpfc_issue_reset);
@@ -2759,6 +2793,196 @@
lpfc_link_speed_show, lpfc_link_speed_store);
/*
+# lpfc_aer_support: Support PCIe device Advanced Error Reporting (AER)
+# 0 = aer disabled or not supported
+# 1 = aer supported and enabled (default)
+# Value range is [0,1]. Default value is 1.
+*/
+
+/**
+ * lpfc_aer_support_store - Set the adapter for aer support
+ *
+ * @dev: class device that is converted into a Scsi_host.
+ * @attr: device attribute, not used.
+ * @buf: containing the string "selective".
+ * @count: unused variable.
+ *
+ * Description:
+ * If the val is 1 and currently the device's AER capability was not
+ * enabled, invoke the kernel's enable AER helper routine, trying to
+ * enable the device's AER capability. If the helper routine enabling
+ * AER returns success, update the device's cfg_aer_support flag to
+ * indicate AER is supported by the device; otherwise, if the device
+ * AER capability is already enabled to support AER, then do nothing.
+ *
+ * If the val is 0 and currently the device's AER support was enabled,
+ * invoke the kernel's disable AER helper routine. After that, update
+ * the device's cfg_aer_support flag to indicate AER is not supported
+ * by the device; otherwise, if the device AER capability is already
+ * disabled from supporting AER, then do nothing.
+ *
+ * Returns:
+ * length of the buf on success if val is in range the intended mode
+ * is supported.
+ * -EINVAL if val out of range or intended mode is not supported.
+ **/
+static ssize_t
+lpfc_aer_support_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct Scsi_Host *shost = class_to_shost(dev);
+ struct lpfc_vport *vport = (struct lpfc_vport *)shost->hostdata;
+ struct lpfc_hba *phba = vport->phba;
+ int val = 0, rc = -EINVAL;
+
+ /* AER not supported on OC devices yet */
+ if (phba->pci_dev_grp == LPFC_PCI_DEV_OC)
+ return -EPERM;
+ if (!isdigit(buf[0]))
+ return -EINVAL;
+ if (sscanf(buf, "%i", &val) != 1)
+ return -EINVAL;
+
+ switch (val) {
+ case 0:
+ if (phba->hba_flag & HBA_AER_ENABLED) {
+ rc = pci_disable_pcie_error_reporting(phba->pcidev);
+ if (!rc) {
+ spin_lock_irq(&phba->hbalock);
+ phba->hba_flag &= ~HBA_AER_ENABLED;
+ spin_unlock_irq(&phba->hbalock);
+ phba->cfg_aer_support = 0;
+ rc = strlen(buf);
+ } else
+ rc = -EPERM;
+ } else {
+ phba->cfg_aer_support = 0;
+ rc = strlen(buf);
+ }
+ break;
+ case 1:
+ if (!(phba->hba_flag & HBA_AER_ENABLED)) {
+ rc = pci_enable_pcie_error_reporting(phba->pcidev);
+ if (!rc) {
+ spin_lock_irq(&phba->hbalock);
+ phba->hba_flag |= HBA_AER_ENABLED;
+ spin_unlock_irq(&phba->hbalock);
+ phba->cfg_aer_support = 1;
+ rc = strlen(buf);
+ } else
+ rc = -EPERM;
+ } else {
+ phba->cfg_aer_support = 1;
+ rc = strlen(buf);
+ }
+ break;
+ default:
+ rc = -EINVAL;
+ break;
+ }
+ return rc;
+}
+
+static int lpfc_aer_support = 1;
+module_param(lpfc_aer_support, int, 1);
+MODULE_PARM_DESC(lpfc_aer_support, "Enable PCIe device AER support");
+lpfc_param_show(aer_support)
+
+/**
+ * lpfc_aer_support_init - Set the initial adapters aer support flag
+ * @phba: lpfc_hba pointer.
+ * @val: link speed value.
+ *
+ * Description:
+ * If val is in a valid range [0,1], then set the adapter's initial
+ * cfg_aer_support field. It will be up to the driver's probe_one
+ * routine to determine whether the device's AER support can be set
+ * or not.
+ *
+ * Notes:
+ * If the value is not in range log a kernel error message, and
+ * choose the default value of setting AER support and return.
+ *
+ * Returns:
+ * zero if val saved.
+ * -EINVAL val out of range
+ **/
+static int
+lpfc_aer_support_init(struct lpfc_hba *phba, int val)
+{
+ /* AER not supported on OC devices yet */
+ if (phba->pci_dev_grp == LPFC_PCI_DEV_OC) {
+ phba->cfg_aer_support = 0;
+ return -EPERM;
+ }
+
+ if (val == 0 || val == 1) {
+ phba->cfg_aer_support = val;
+ return 0;
+ }
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2712 lpfc_aer_support attribute value %d out "
+ "of range, allowed values are 0|1, setting it "
+ "to default value of 1\n", val);
+ /* By default, try to enable AER on a device */
+ phba->cfg_aer_support = 1;
+ return -EINVAL;
+}
+
+static DEVICE_ATTR(lpfc_aer_support, S_IRUGO | S_IWUSR,
+ lpfc_aer_support_show, lpfc_aer_support_store);
+
+/**
+ * lpfc_aer_cleanup_state - Clean up aer state to the aer enabled device
+ * @dev: class device that is converted into a Scsi_host.
+ * @attr: device attribute, not used.
+ * @buf: containing the string "selective".
+ * @count: unused variable.
+ *
+ * Description:
+ * If the @buf contains 1 and the device currently has the AER support
+ * enabled, then invokes the kernel AER helper routine
+ * pci_cleanup_aer_uncorrect_error_status to clean up the uncorrectable
+ * error status register.
+ *
+ * Notes:
+ *
+ * Returns:
+ * -EINVAL if the buf does not contain the 1 or the device is not currently
+ * enabled with the AER support.
+ **/
+static ssize_t
+lpfc_aer_cleanup_state(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct Scsi_Host *shost = class_to_shost(dev);
+ struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
+ struct lpfc_hba *phba = vport->phba;
+ int val, rc = -1;
+
+ /* AER not supported on OC devices yet */
+ if (phba->pci_dev_grp == LPFC_PCI_DEV_OC)
+ return -EPERM;
+ if (!isdigit(buf[0]))
+ return -EINVAL;
+ if (sscanf(buf, "%i", &val) != 1)
+ return -EINVAL;
+ if (val != 1)
+ return -EINVAL;
+
+ if (phba->hba_flag & HBA_AER_ENABLED)
+ rc = pci_cleanup_aer_uncorrect_error_status(phba->pcidev);
+
+ if (rc == 0)
+ return strlen(buf);
+ else
+ return -EPERM;
+}
+
+static DEVICE_ATTR(lpfc_aer_state_cleanup, S_IWUSR, NULL,
+ lpfc_aer_cleanup_state);
+
+/*
# lpfc_fcp_class: Determines FC class to use for the FCP protocol.
# Value range is [2,3]. Default value is 3.
*/
@@ -2846,7 +3070,7 @@
# identifies what rctl value to configure the additional ring for.
# Value range is [1,0xff]. Default value is 4 (Unsolicated Data).
*/
-LPFC_ATTR_R(multi_ring_rctl, FC_UNSOL_DATA, 1,
+LPFC_ATTR_R(multi_ring_rctl, FC_RCTL_DD_UNSOL_DATA, 1,
255, "Identifies RCTL for additional ring configuration");
/*
@@ -2854,7 +3078,7 @@
# identifies what type value to configure the additional ring for.
# Value range is [1,0xff]. Default value is 5 (LLC/SNAP).
*/
-LPFC_ATTR_R(multi_ring_type, FC_LLC_SNAP, 1,
+LPFC_ATTR_R(multi_ring_type, FC_TYPE_IP, 1,
255, "Identifies TYPE for additional ring configuration");
/*
@@ -2947,15 +3171,6 @@
LPFC_ATTR_R(enable_bg, 0, 0, 1, "Enable BlockGuard Support");
/*
-# lpfc_enable_fip: When set, FIP is required to start discovery. If not
-# set, the driver will add an FCF record manually if the port has no
-# FCF records available and start discovery.
-# Value range is [0,1]. Default value is 1 (enabled)
-*/
-LPFC_ATTR_RW(enable_fip, 0, 0, 1, "Enable FIP Discovery");
-
-
-/*
# lpfc_prot_mask: i
# - Bit mask of host protection capabilities used to register with the
# SCSI mid-layer
@@ -3013,6 +3228,7 @@
&dev_attr_num_discovered_ports,
&dev_attr_menlo_mgmt_mode,
&dev_attr_lpfc_drvr_version,
+ &dev_attr_lpfc_enable_fip,
&dev_attr_lpfc_temp_sensor,
&dev_attr_lpfc_log_verbose,
&dev_attr_lpfc_lun_queue_depth,
@@ -3020,7 +3236,6 @@
&dev_attr_lpfc_peer_port_login,
&dev_attr_lpfc_nodev_tmo,
&dev_attr_lpfc_devloss_tmo,
- &dev_attr_lpfc_enable_fip,
&dev_attr_lpfc_fcp_class,
&dev_attr_lpfc_use_adisc,
&dev_attr_lpfc_ack0,
@@ -3061,6 +3276,8 @@
&dev_attr_lpfc_max_scsicmpl_time,
&dev_attr_lpfc_stat_data_ctrl,
&dev_attr_lpfc_prot_sg_seg_cnt,
+ &dev_attr_lpfc_aer_support,
+ &dev_attr_lpfc_aer_state_cleanup,
NULL,
};
@@ -3073,7 +3290,6 @@
&dev_attr_lpfc_lun_queue_depth,
&dev_attr_lpfc_nodev_tmo,
&dev_attr_lpfc_devloss_tmo,
- &dev_attr_lpfc_enable_fip,
&dev_attr_lpfc_hba_queue_depth,
&dev_attr_lpfc_peer_port_login,
&dev_attr_lpfc_restrict_login,
@@ -3147,7 +3363,7 @@
* sysfs_ctlreg_read - Read method for reading from ctlreg
* @kobj: kernel kobject that contains the kernel class device.
* @bin_attr: kernel attributes passed to us.
- * @buf: if succesful contains the data from the adapter IOREG space.
+ * @buf: if successful contains the data from the adapter IOREG space.
* @off: offset into buffer to beginning of data.
* @count: bytes to transfer.
*
@@ -3815,7 +4031,11 @@
hs->invalid_crc_count -= lso->invalid_crc_count;
hs->error_frames -= lso->error_frames;
- if (phba->fc_topology == TOPOLOGY_LOOP) {
+ if (phba->hba_flag & HBA_FCOE_SUPPORT) {
+ hs->lip_count = -1;
+ hs->nos_count = (phba->link_events >> 1);
+ hs->nos_count -= lso->link_events;
+ } else if (phba->fc_topology == TOPOLOGY_LOOP) {
hs->lip_count = (phba->fc_eventTag >> 1);
hs->lip_count -= lso->link_events;
hs->nos_count = -1;
@@ -3906,7 +4126,10 @@
lso->invalid_tx_word_count = pmb->un.varRdLnk.invalidXmitWord;
lso->invalid_crc_count = pmb->un.varRdLnk.crcCnt;
lso->error_frames = pmb->un.varRdLnk.crcCnt;
- lso->link_events = (phba->fc_eventTag >> 1);
+ if (phba->hba_flag & HBA_FCOE_SUPPORT)
+ lso->link_events = (phba->link_events >> 1);
+ else
+ lso->link_events = (phba->fc_eventTag >> 1);
psli->stats_start = get_seconds();
@@ -4222,14 +4445,17 @@
lpfc_enable_hba_reset_init(phba, lpfc_enable_hba_reset);
lpfc_enable_hba_heartbeat_init(phba, lpfc_enable_hba_heartbeat);
lpfc_enable_bg_init(phba, lpfc_enable_bg);
+ if (phba->sli_rev == LPFC_SLI_REV4)
+ phba->cfg_poll = 0;
+ else
phba->cfg_poll = lpfc_poll;
phba->cfg_soft_wwnn = 0L;
phba->cfg_soft_wwpn = 0L;
lpfc_sg_seg_cnt_init(phba, lpfc_sg_seg_cnt);
lpfc_prot_sg_seg_cnt_init(phba, lpfc_prot_sg_seg_cnt);
lpfc_hba_queue_depth_init(phba, lpfc_hba_queue_depth);
- lpfc_enable_fip_init(phba, lpfc_enable_fip);
lpfc_hba_log_verbose_init(phba, lpfc_log_verbose);
+ lpfc_aer_support_init(phba, lpfc_aer_support);
return;
}
diff --git a/drivers/scsi/lpfc/lpfc_bsg.c b/drivers/scsi/lpfc/lpfc_bsg.c
index da6bf5a..a5d9048 100644
--- a/drivers/scsi/lpfc/lpfc_bsg.c
+++ b/drivers/scsi/lpfc/lpfc_bsg.c
@@ -26,6 +26,7 @@
#include <scsi/scsi_host.h>
#include <scsi/scsi_transport_fc.h>
#include <scsi/scsi_bsg_fc.h>
+#include <scsi/fc/fc_fs.h>
#include "lpfc_hw4.h"
#include "lpfc_hw.h"
@@ -148,8 +149,8 @@
cmd->ulpCommand = CMD_GEN_REQUEST64_CR;
cmd->un.genreq64.w5.hcsw.Fctl = (SI | LA);
cmd->un.genreq64.w5.hcsw.Dfctl = 0;
- cmd->un.genreq64.w5.hcsw.Rctl = FC_UNSOL_CTL;
- cmd->un.genreq64.w5.hcsw.Type = FC_COMMON_TRANSPORT_ULP;
+ cmd->un.genreq64.w5.hcsw.Rctl = FC_RCTL_DD_UNSOL_CTL;
+ cmd->un.genreq64.w5.hcsw.Type = FC_TYPE_CT;
cmd->ulpBdeCount = 1;
cmd->ulpLe = 1;
cmd->ulpClass = CLASS3;
diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h
index 0830f37..650494d 100644
--- a/drivers/scsi/lpfc/lpfc_crtn.h
+++ b/drivers/scsi/lpfc/lpfc_crtn.h
@@ -49,6 +49,8 @@
void lpfc_request_features(struct lpfc_hba *, struct lpfcMboxq *);
struct lpfc_vport *lpfc_find_vport_by_did(struct lpfc_hba *, uint32_t);
+void lpfc_cleanup_rcv_buffers(struct lpfc_vport *);
+void lpfc_rcv_seq_check_edtov(struct lpfc_vport *);
void lpfc_cleanup_rpis(struct lpfc_vport *, int);
int lpfc_linkdown(struct lpfc_hba *);
void lpfc_linkdown_port(struct lpfc_vport *);
@@ -144,6 +146,8 @@
void lpfc_ct_unsol_event(struct lpfc_hba *, struct lpfc_sli_ring *,
struct lpfc_iocbq *);
+void lpfc_sli4_ct_abort_unsol_event(struct lpfc_hba *, struct lpfc_sli_ring *,
+ struct lpfc_iocbq *);
int lpfc_ns_cmd(struct lpfc_vport *, int, uint8_t, uint32_t);
int lpfc_fdmi_cmd(struct lpfc_vport *, struct lpfc_nodelist *, int);
void lpfc_fdmi_tmo(unsigned long);
@@ -188,7 +192,7 @@
void lpfc_init_vfi(struct lpfcMboxq *, struct lpfc_vport *);
void lpfc_reg_vfi(struct lpfcMboxq *, struct lpfc_vport *, dma_addr_t);
void lpfc_init_vpi(struct lpfc_hba *, struct lpfcMboxq *, uint16_t);
-void lpfc_unreg_vfi(struct lpfcMboxq *, uint16_t);
+void lpfc_unreg_vfi(struct lpfcMboxq *, struct lpfc_vport *);
void lpfc_reg_fcfi(struct lpfc_hba *, struct lpfcMboxq *);
void lpfc_unreg_fcfi(struct lpfcMboxq *, uint16_t);
void lpfc_resume_rpi(struct lpfcMboxq *, struct lpfc_nodelist *);
@@ -212,7 +216,10 @@
void lpfc_poll_timeout(unsigned long ptr);
void lpfc_poll_start_timer(struct lpfc_hba *);
void lpfc_poll_eratt(unsigned long);
-void lpfc_sli_poll_fcp_ring(struct lpfc_hba *);
+int
+lpfc_sli_handle_fast_ring_event(struct lpfc_hba *,
+ struct lpfc_sli_ring *, uint32_t);
+
struct lpfc_iocbq * lpfc_sli_get_iocbq(struct lpfc_hba *);
void lpfc_sli_release_iocbq(struct lpfc_hba *, struct lpfc_iocbq *);
uint16_t lpfc_sli_next_iotag(struct lpfc_hba *, struct lpfc_iocbq *);
@@ -235,7 +242,7 @@
int lpfc_sli_check_eratt(struct lpfc_hba *);
void lpfc_sli_handle_slow_ring_event(struct lpfc_hba *,
struct lpfc_sli_ring *, uint32_t);
-int lpfc_sli4_handle_received_buffer(struct lpfc_hba *);
+void lpfc_sli4_handle_received_buffer(struct lpfc_hba *, struct hbq_dmabuf *);
void lpfc_sli_def_mbox_cmpl(struct lpfc_hba *, LPFC_MBOXQ_t *);
int lpfc_sli_issue_iocb(struct lpfc_hba *, uint32_t,
struct lpfc_iocbq *, uint32_t);
@@ -361,6 +368,7 @@
void lpfc_parse_fcoe_conf(struct lpfc_hba *, uint8_t *, uint32_t);
int lpfc_parse_vpd(struct lpfc_hba *, uint8_t *, int);
void lpfc_start_fdiscs(struct lpfc_hba *phba);
+struct lpfc_vport *lpfc_find_vport_by_vpid(struct lpfc_hba *, uint16_t);
#define ScsiResult(host_code, scsi_code) (((host_code) << 16) | scsi_code)
#define HBA_EVENT_RSCN 5
diff --git a/drivers/scsi/lpfc/lpfc_ct.c b/drivers/scsi/lpfc/lpfc_ct.c
index 9a1bd95..0ebcd9b 100644
--- a/drivers/scsi/lpfc/lpfc_ct.c
+++ b/drivers/scsi/lpfc/lpfc_ct.c
@@ -31,6 +31,7 @@
#include <scsi/scsi_device.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_transport_fc.h>
+#include <scsi/fc/fc_fs.h>
#include "lpfc_hw4.h"
#include "lpfc_hw.h"
@@ -87,7 +88,6 @@
lpfc_ct_unsol_event(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
struct lpfc_iocbq *piocbq)
{
-
struct lpfc_dmabuf *mp = NULL;
IOCB_t *icmd = &piocbq->iocb;
int i;
@@ -160,6 +160,39 @@
}
}
+/**
+ * lpfc_sli4_ct_abort_unsol_event - Default handle for sli4 unsol abort
+ * @phba: Pointer to HBA context object.
+ * @pring: Pointer to the driver internal I/O ring.
+ * @piocbq: Pointer to the IOCBQ.
+ *
+ * This function serves as the default handler for the sli4 unsolicited
+ * abort event. It shall be invoked when there is no application interface
+ * registered unsolicited abort handler. This handler does nothing but
+ * just simply releases the dma buffer used by the unsol abort event.
+ **/
+void
+lpfc_sli4_ct_abort_unsol_event(struct lpfc_hba *phba,
+ struct lpfc_sli_ring *pring,
+ struct lpfc_iocbq *piocbq)
+{
+ IOCB_t *icmd = &piocbq->iocb;
+ struct lpfc_dmabuf *bdeBuf;
+ uint32_t size;
+
+ /* Forward abort event to any process registered to receive ct event */
+ lpfc_bsg_ct_unsol_event(phba, pring, piocbq);
+
+ /* If there is no BDE associated with IOCB, there is nothing to do */
+ if (icmd->ulpBdeCount == 0)
+ return;
+ bdeBuf = piocbq->context2;
+ piocbq->context2 = NULL;
+ size = icmd->un.cont64[0].tus.f.bdeSize;
+ lpfc_ct_unsol_buffer(phba, piocbq, bdeBuf, size);
+ lpfc_in_buf_free(phba, bdeBuf);
+}
+
static void
lpfc_free_ct_rsp(struct lpfc_hba *phba, struct lpfc_dmabuf *mlist)
{
@@ -304,8 +337,8 @@
/* Fill in rest of iocb */
icmd->un.genreq64.w5.hcsw.Fctl = (SI | LA);
icmd->un.genreq64.w5.hcsw.Dfctl = 0;
- icmd->un.genreq64.w5.hcsw.Rctl = FC_UNSOL_CTL;
- icmd->un.genreq64.w5.hcsw.Type = FC_COMMON_TRANSPORT_ULP;
+ icmd->un.genreq64.w5.hcsw.Rctl = FC_RCTL_DD_UNSOL_CTL;
+ icmd->un.genreq64.w5.hcsw.Type = FC_TYPE_CT;
if (!tmo) {
/* FC spec states we need 3 * ratov for CT requests */
@@ -363,9 +396,14 @@
outmp = lpfc_alloc_ct_rsp(phba, cmdcode, bpl, rsp_size, &cnt);
if (!outmp)
return -ENOMEM;
-
+ /*
+ * Form the CT IOCB. The total number of BDEs in this IOCB
+ * is the single command plus response count from
+ * lpfc_alloc_ct_rsp.
+ */
+ cnt += 1;
status = lpfc_gen_req(vport, bmp, inmp, outmp, cmpl, ndlp, 0,
- cnt+1, 0, retry);
+ cnt, 0, retry);
if (status) {
lpfc_free_ct_rsp(phba, outmp);
return -ENOMEM;
@@ -501,6 +539,9 @@
SLI_CTNS_GFF_ID,
0, Did) == 0)
vport->num_disc_nodes++;
+ else
+ lpfc_setup_disc_node
+ (vport, Did);
}
else {
lpfc_debugfs_disc_trc(vport,
@@ -1209,7 +1250,7 @@
be16_to_cpu(SLI_CTNS_RFF_ID);
CtReq->un.rff.PortId = cpu_to_be32(vport->fc_myDID);
CtReq->un.rff.fbits = FC4_FEATURE_INIT;
- CtReq->un.rff.type_code = FC_FCP_DATA;
+ CtReq->un.rff.type_code = FC_TYPE_FCP;
cmpl = lpfc_cmpl_ct_cmd_rff_id;
break;
}
diff --git a/drivers/scsi/lpfc/lpfc_debugfs.c b/drivers/scsi/lpfc/lpfc_debugfs.c
index 8d0f0de..3915841 100644
--- a/drivers/scsi/lpfc/lpfc_debugfs.c
+++ b/drivers/scsi/lpfc/lpfc_debugfs.c
@@ -926,7 +926,7 @@
goto out;
/* Round to page boundry */
- printk(KERN_ERR "BLKGRD %s: _dump_buf_data=0x%p\n",
+ printk(KERN_ERR "9059 BLKGRD: %s: _dump_buf_data=0x%p\n",
__func__, _dump_buf_data);
debug->buffer = _dump_buf_data;
if (!debug->buffer) {
@@ -956,8 +956,8 @@
goto out;
/* Round to page boundry */
- printk(KERN_ERR "BLKGRD %s: _dump_buf_dif=0x%p file=%s\n", __func__,
- _dump_buf_dif, file->f_dentry->d_name.name);
+ printk(KERN_ERR "9060 BLKGRD: %s: _dump_buf_dif=0x%p file=%s\n",
+ __func__, _dump_buf_dif, file->f_dentry->d_name.name);
debug->buffer = _dump_buf_dif;
if (!debug->buffer) {
kfree(debug);
@@ -1377,7 +1377,7 @@
debugfs_create_dir(name, phba->hba_debugfs_root);
if (!vport->vport_debugfs_root) {
lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
- "0417 Cant create debugfs");
+ "0417 Cant create debugfs\n");
goto debug_failed;
}
atomic_inc(&phba->debugfs_vport_count);
@@ -1430,7 +1430,7 @@
vport, &lpfc_debugfs_op_nodelist);
if (!vport->debug_nodelist) {
lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
- "0409 Cant create debugfs nodelist");
+ "0409 Cant create debugfs nodelist\n");
goto debug_failed;
}
debug_failed:
diff --git a/drivers/scsi/lpfc/lpfc_disc.h b/drivers/scsi/lpfc/lpfc_disc.h
index 1142070..2851d75 100644
--- a/drivers/scsi/lpfc/lpfc_disc.h
+++ b/drivers/scsi/lpfc/lpfc_disc.h
@@ -19,7 +19,7 @@
*******************************************************************/
#define FC_MAX_HOLD_RSCN 32 /* max number of deferred RSCNs */
-#define FC_MAX_NS_RSP 65536 /* max size NameServer rsp */
+#define FC_MAX_NS_RSP 64512 /* max size NameServer rsp */
#define FC_MAXLOOP 126 /* max devices supported on a fc loop */
#define LPFC_DISC_FLOGI_TMO 10 /* Discovery FLOGI ratov */
@@ -105,8 +105,6 @@
struct lpfc_vport *vport;
struct lpfc_work_evt els_retry_evt;
struct lpfc_work_evt dev_loss_evt;
- unsigned long last_ramp_up_time; /* jiffy of last ramp up */
- unsigned long last_q_full_time; /* jiffy of last queue full */
struct kref kref;
atomic_t cmd_pending;
uint32_t cmd_qdepth;
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index 45337cd..ce52270 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -173,13 +173,26 @@
* in FIP mode send FLOGI, FDISC and LOGO as FIP frames.
*/
if ((did == Fabric_DID) &&
- bf_get(lpfc_fip_flag, &phba->sli4_hba.sli4_flags) &&
+ (phba->hba_flag & HBA_FIP_SUPPORT) &&
((elscmd == ELS_CMD_FLOGI) ||
(elscmd == ELS_CMD_FDISC) ||
(elscmd == ELS_CMD_LOGO)))
- elsiocb->iocb_flag |= LPFC_FIP_ELS;
+ switch (elscmd) {
+ case ELS_CMD_FLOGI:
+ elsiocb->iocb_flag |= ((ELS_ID_FLOGI << LPFC_FIP_ELS_ID_SHIFT)
+ & LPFC_FIP_ELS_ID_MASK);
+ break;
+ case ELS_CMD_FDISC:
+ elsiocb->iocb_flag |= ((ELS_ID_FDISC << LPFC_FIP_ELS_ID_SHIFT)
+ & LPFC_FIP_ELS_ID_MASK);
+ break;
+ case ELS_CMD_LOGO:
+ elsiocb->iocb_flag |= ((ELS_ID_LOGO << LPFC_FIP_ELS_ID_SHIFT)
+ & LPFC_FIP_ELS_ID_MASK);
+ break;
+ }
else
- elsiocb->iocb_flag &= ~LPFC_FIP_ELS;
+ elsiocb->iocb_flag &= ~LPFC_FIP_ELS_ID_MASK;
icmd = &elsiocb->iocb;
@@ -591,7 +604,7 @@
} else {
ndlp->nlp_type |= NLP_FABRIC;
lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNMAPPED_NODE);
- if (vport->vfi_state & LPFC_VFI_REGISTERED) {
+ if (vport->vpi_state & LPFC_VPI_REGISTERED) {
lpfc_start_fdiscs(phba);
lpfc_do_scr_ns_plogi(phba, vport);
} else
@@ -802,7 +815,7 @@
/* FLOGI completes successfully */
lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS,
- "0101 FLOGI completes sucessfully "
+ "0101 FLOGI completes successfully "
"Data: x%x x%x x%x x%x\n",
irsp->un.ulpWord[4], sp->cmn.e_d_tov,
sp->cmn.w2.r_a_tov, sp->cmn.edtovResolution);
@@ -2452,6 +2465,7 @@
*/
del_timer_sync(&ndlp->nlp_delayfunc);
retry = ndlp->nlp_retry;
+ ndlp->nlp_retry = 0;
switch (cmd) {
case ELS_CMD_FLOGI:
@@ -2711,12 +2725,16 @@
!lpfc_error_lost_link(irsp)) {
/* FLOGI retry policy */
retry = 1;
- maxretry = 48;
- if (cmdiocb->retry >= 32)
+ /* retry forever */
+ maxretry = 0;
+ if (cmdiocb->retry >= 100)
+ delay = 5000;
+ else if (cmdiocb->retry >= 32)
delay = 1000;
}
- if ((++cmdiocb->retry) >= maxretry) {
+ cmdiocb->retry++;
+ if (maxretry && (cmdiocb->retry >= maxretry)) {
phba->fc_stat.elsRetryExceeded++;
retry = 0;
}
@@ -4133,7 +4151,7 @@
/* Indicate we are walking fc_rscn_id_list on this vport */
vport->fc_rscn_flush = 1;
spin_unlock_irq(shost->host_lock);
- /* Get the array count after sucessfully have the token */
+ /* Get the array count after successfully have the token */
rscn_cnt = vport->fc_rscn_id_cnt;
/* If we are already processing an RSCN, save the received
* RSCN payload buffer, cmdiocb->context2 to process later.
@@ -4503,6 +4521,29 @@
}
/**
+ * lpfc_els_rcv_rrq - Process an unsolicited rrq iocb
+ * @vport: pointer to a host virtual N_Port data structure.
+ * @cmdiocb: pointer to lpfc command iocb data structure.
+ * @ndlp: pointer to a node-list data structure.
+ *
+ * This routine processes a Reinstate Recovery Qualifier (RRQ) IOCB
+ * received as an ELS unsolicited event. A request to RRQ shall only
+ * be accepted if the Originator Nx_Port N_Port_ID or the Responder
+ * Nx_Port N_Port_ID of the target Exchange is the same as the
+ * N_Port_ID of the Nx_Port that makes the request. If the RRQ is
+ * not accepted, an LS_RJT with reason code "Unable to perform
+ * command request" and reason code explanation "Invalid Originator
+ * S_ID" shall be returned. For now, we just unconditionally accept
+ * RRQ from the target.
+ **/
+static void
+lpfc_els_rcv_rrq(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb,
+ struct lpfc_nodelist *ndlp)
+{
+ lpfc_els_rsp_acc(vport, ELS_CMD_ACC, cmdiocb, ndlp, NULL);
+}
+
+/**
* lpfc_els_rsp_rps_acc - Completion callbk func for MBX_READ_LNK_STAT mbox cmd
* @phba: pointer to lpfc hba data structure.
* @pmb: pointer to the driver internal queue element for mailbox command.
@@ -5396,7 +5437,7 @@
if (lpfc_els_chk_latt(vport))
goto dropit;
- /* Ignore traffic recevied during vport shutdown. */
+ /* Ignore traffic received during vport shutdown. */
if (vport->load_flag & FC_UNLOADING)
goto dropit;
@@ -5618,6 +5659,16 @@
if (newnode)
lpfc_nlp_put(ndlp);
break;
+ case ELS_CMD_RRQ:
+ lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_ELS_UNSOL,
+ "RCV RRQ: did:x%x/ste:x%x flg:x%x",
+ did, vport->port_state, ndlp->nlp_flag);
+
+ phba->fc_stat.elsRcvRRQ++;
+ lpfc_els_rcv_rrq(vport, elsiocb, ndlp);
+ if (newnode)
+ lpfc_nlp_put(ndlp);
+ break;
default:
lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_ELS_UNSOL,
"RCV ELS cmd: cmd:x%x did:x%x/ste:x%x",
@@ -5670,7 +5721,7 @@
* NULL - No vport with the matching @vpi found
* Otherwise - Address to the vport with the matching @vpi.
**/
-static struct lpfc_vport *
+struct lpfc_vport *
lpfc_find_vport_by_vpid(struct lpfc_hba *phba, uint16_t vpi)
{
struct lpfc_vport *vport;
@@ -6024,11 +6075,6 @@
irsp->ulpStatus, irsp->un.ulpWord[4]);
goto fdisc_failed;
}
- if (vport->fc_vport->vport_state == FC_VPORT_INITIALIZING)
- lpfc_vport_set_state(vport, FC_VPORT_FAILED);
- lpfc_nlp_put(ndlp);
- /* giving up on FDISC. Cancel discovery timer */
- lpfc_can_disctmo(vport);
spin_lock_irq(shost->host_lock);
vport->fc_flag |= FC_FABRIC;
if (vport->phba->fc_topology == TOPOLOGY_LOOP)
@@ -6107,6 +6153,7 @@
int did = ndlp->nlp_DID;
int rc;
+ vport->port_state = LPFC_FDISC;
cmdsize = (sizeof(uint32_t) + sizeof(struct serv_parm));
elsiocb = lpfc_prep_els_iocb(vport, 1, cmdsize, retry, ndlp, did,
ELS_CMD_FDISC);
@@ -6172,7 +6219,6 @@
return 1;
}
lpfc_vport_set_state(vport, FC_VPORT_INITIALIZING);
- vport->port_state = LPFC_FDISC;
return 0;
}
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
old mode 100644
new mode 100755
index e6a47e2..3b94244
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -525,8 +525,6 @@
spin_unlock_irq(&phba->hbalock);
lpfc_sli_hbqbuf_add_hbqs(phba, LPFC_ELS_HBQ);
}
- if (phba->hba_flag & HBA_RECEIVE_BUFFER)
- lpfc_sli4_handle_received_buffer(phba);
}
vports = lpfc_create_vport_work_array(phba);
@@ -568,8 +566,9 @@
pring = &phba->sli.ring[LPFC_ELS_RING];
status = (ha_copy & (HA_RXMASK << (4*LPFC_ELS_RING)));
status >>= (4*LPFC_ELS_RING);
- if ((status & HA_RXMASK)
- || (pring->flag & LPFC_DEFERRED_RING_EVENT)) {
+ if ((status & HA_RXMASK) ||
+ (pring->flag & LPFC_DEFERRED_RING_EVENT) ||
+ (phba->hba_flag & HBA_SP_QUEUE_EVT)) {
if (pring->flag & LPFC_STOP_IOCB_EVENT) {
pring->flag |= LPFC_DEFERRED_RING_EVENT;
/* Set the lpfc data pending flag */
@@ -688,7 +687,8 @@
lpfc_unreg_rpi(vport, ndlp);
/* Leave Fabric nodes alone on link down */
- if (!remove && ndlp->nlp_type & NLP_FABRIC)
+ if ((phba->sli_rev < LPFC_SLI_REV4) &&
+ (!remove && ndlp->nlp_type & NLP_FABRIC))
continue;
rc = lpfc_disc_state_machine(vport, ndlp, NULL,
remove
@@ -706,6 +706,9 @@
void
lpfc_port_link_failure(struct lpfc_vport *vport)
{
+ /* Cleanup any outstanding received buffers */
+ lpfc_cleanup_rcv_buffers(vport);
+
/* Cleanup any outstanding RSCN activity */
lpfc_els_flush_rscn(vport);
@@ -1015,13 +1018,12 @@
mempool_free(mboxq, phba->mbox_mem_pool);
return;
}
- if (vport->port_state != LPFC_FLOGI) {
- spin_lock_irqsave(&phba->hbalock, flags);
- phba->fcf.fcf_flag |= (FCF_DISCOVERED | FCF_IN_USE);
- phba->hba_flag &= ~FCF_DISC_INPROGRESS;
- spin_unlock_irqrestore(&phba->hbalock, flags);
+ spin_lock_irqsave(&phba->hbalock, flags);
+ phba->fcf.fcf_flag |= (FCF_DISCOVERED | FCF_IN_USE);
+ phba->hba_flag &= ~FCF_DISC_INPROGRESS;
+ spin_unlock_irqrestore(&phba->hbalock, flags);
+ if (vport->port_state != LPFC_FLOGI)
lpfc_initial_flogi(vport);
- }
mempool_free(mboxq, phba->mbox_mem_pool);
return;
@@ -1199,6 +1201,7 @@
/* If the FCF is not availabe do nothing. */
if (!(phba->fcf.fcf_flag & FCF_AVAILABLE)) {
+ phba->hba_flag &= ~FCF_DISC_INPROGRESS;
spin_unlock_irqrestore(&phba->hbalock, flags);
return;
}
@@ -1216,15 +1219,23 @@
fcf_mbxq = mempool_alloc(phba->mbox_mem_pool,
GFP_KERNEL);
- if (!fcf_mbxq)
+ if (!fcf_mbxq) {
+ spin_lock_irqsave(&phba->hbalock, flags);
+ phba->hba_flag &= ~FCF_DISC_INPROGRESS;
+ spin_unlock_irqrestore(&phba->hbalock, flags);
return;
+ }
lpfc_reg_fcfi(phba, fcf_mbxq);
fcf_mbxq->vport = phba->pport;
fcf_mbxq->mbox_cmpl = lpfc_mbx_cmpl_reg_fcfi;
rc = lpfc_sli_issue_mbox(phba, fcf_mbxq, MBX_NOWAIT);
- if (rc == MBX_NOT_FINISHED)
+ if (rc == MBX_NOT_FINISHED) {
+ spin_lock_irqsave(&phba->hbalock, flags);
+ phba->hba_flag &= ~FCF_DISC_INPROGRESS;
+ spin_unlock_irqrestore(&phba->hbalock, flags);
mempool_free(fcf_mbxq, phba->mbox_mem_pool);
+ }
return;
}
@@ -1253,13 +1264,27 @@
uint16_t *vlan_id)
{
struct lpfc_fcf_conn_entry *conn_entry;
+ int i, j, fcf_vlan_id = 0;
+
+ /* Find the lowest VLAN id in the FCF record */
+ for (i = 0; i < 512; i++) {
+ if (new_fcf_record->vlan_bitmap[i]) {
+ fcf_vlan_id = i * 8;
+ j = 0;
+ while (!((new_fcf_record->vlan_bitmap[i] >> j) & 1)) {
+ j++;
+ fcf_vlan_id++;
+ }
+ break;
+ }
+ }
/* If FCF not available return 0 */
if (!bf_get(lpfc_fcf_record_fcf_avail, new_fcf_record) ||
!bf_get(lpfc_fcf_record_fcf_valid, new_fcf_record))
return 0;
- if (!phba->cfg_enable_fip) {
+ if (!(phba->hba_flag & HBA_FIP_SUPPORT)) {
*boot_flag = 0;
*addr_mode = bf_get(lpfc_fcf_record_mac_addr_prov,
new_fcf_record);
@@ -1286,7 +1311,11 @@
if (*addr_mode & LPFC_FCF_FPMA)
*addr_mode = LPFC_FCF_FPMA;
- *vlan_id = 0xFFFF;
+ /* If FCF record report a vlan id use that vlan id */
+ if (fcf_vlan_id)
+ *vlan_id = fcf_vlan_id;
+ else
+ *vlan_id = 0xFFFF;
return 1;
}
@@ -1384,8 +1413,15 @@
(*addr_mode & LPFC_FCF_FPMA))
*addr_mode = LPFC_FCF_FPMA;
+ /* If matching connect list has a vlan id, use it */
if (conn_entry->conn_rec.flags & FCFCNCT_VLAN_VALID)
*vlan_id = conn_entry->conn_rec.vlan_tag;
+ /*
+ * If no vlan id is specified in connect list, use the vlan id
+ * in the FCF record
+ */
+ else if (fcf_vlan_id)
+ *vlan_id = fcf_vlan_id;
else
*vlan_id = 0xFFFF;
@@ -1423,6 +1459,15 @@
if (phba->link_state >= LPFC_LINK_UP)
lpfc_sli4_read_fcf_record(phba, LPFC_FCOE_FCF_GET_FIRST);
+ else {
+ /*
+ * Do not continue FCF discovery and clear FCF_DISC_INPROGRESS
+ * flag
+ */
+ spin_lock_irq(&phba->hbalock);
+ phba->hba_flag &= ~FCF_DISC_INPROGRESS;
+ spin_unlock_irq(&phba->hbalock);
+ }
if (unreg_fcf) {
spin_lock_irq(&phba->hbalock);
@@ -1659,9 +1704,8 @@
lpfc_initial_fdisc(vport);
else {
lpfc_vport_set_state(vport, FC_VPORT_NO_FABRIC_SUPP);
- lpfc_printf_vlog(vport, KERN_ERR,
- LOG_ELS,
- "2606 No NPIV Fabric support\n");
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
+ "2606 No NPIV Fabric support\n");
}
return;
}
@@ -1756,8 +1800,8 @@
lpfc_vport_set_state(vport, FC_VPORT_FAILED);
goto fail_free_mem;
}
- /* Mark the vport has registered with its VFI */
- vport->vfi_state |= LPFC_VFI_REGISTERED;
+ /* The VPI is implicitly registered when the VFI is registered */
+ vport->vpi_state |= LPFC_VPI_REGISTERED;
if (vport->port_state == LPFC_FABRIC_CFG_LINK) {
lpfc_start_fdiscs(phba);
@@ -1861,7 +1905,10 @@
if (phba->fc_topology == TOPOLOGY_LOOP) {
phba->sli3_options &= ~LPFC_SLI3_NPIV_ENABLED;
- if (phba->cfg_enable_npiv)
+ /* if npiv is enabled and this adapter supports npiv log
+ * a message that npiv is not supported in this topology
+ */
+ if (phba->cfg_enable_npiv && phba->max_vpi)
lpfc_printf_log(phba, KERN_ERR, LOG_LINK_EVENT,
"1309 Link Up Event npiv not supported in loop "
"topology\n");
@@ -1955,7 +2002,7 @@
* is phase 1 implementation that support FCF index 0 and driver
* defaults.
*/
- if (phba->cfg_enable_fip == 0) {
+ if (!(phba->hba_flag & HBA_FIP_SUPPORT)) {
fcf_record = kzalloc(sizeof(struct fcf_record),
GFP_KERNEL);
if (unlikely(!fcf_record)) {
@@ -2085,6 +2132,7 @@
else
phba->sli.sli_flag &= ~LPFC_MENLO_MAINT;
+ phba->link_events++;
if (la->attType == AT_LINK_UP && (!la->mm)) {
phba->fc_stat.LinkUp++;
if (phba->link_flag & LS_LOOPBACK_MODE) {
@@ -2211,13 +2259,14 @@
mb->mbxStatus);
break;
}
+ vport->vpi_state &= ~LPFC_VPI_REGISTERED;
vport->unreg_vpi_cmpl = VPORT_OK;
mempool_free(pmb, phba->mbox_mem_pool);
/*
* This shost reference might have been taken at the beginning of
* lpfc_vport_delete()
*/
- if (vport->load_flag & FC_UNLOADING)
+ if ((vport->load_flag & FC_UNLOADING) && (vport != phba->pport))
scsi_host_put(shost);
}
@@ -2268,6 +2317,7 @@
goto out;
}
+ vport->vpi_state |= LPFC_VPI_REGISTERED;
vport->num_disc_nodes = 0;
/* go thru NPR list and issue ELS PLOGIs */
if (vport->fc_npr_cnt)
@@ -3077,7 +3127,7 @@
struct lpfc_sli *psli;
struct lpfc_sli_ring *pring;
struct lpfc_iocbq *iocb, *next_iocb;
- uint32_t rpi, i;
+ uint32_t i;
lpfc_fabric_abort_nport(ndlp);
@@ -3086,7 +3136,6 @@
* by firmware with a no rpi error.
*/
psli = &phba->sli;
- rpi = ndlp->nlp_rpi;
if (ndlp->nlp_flag & NLP_RPI_VALID) {
/* Now process each ring */
for (i = 0; i < psli->num_rings; i++) {
@@ -4322,6 +4371,14 @@
ret = 1;
spin_unlock_irq(shost->host_lock);
goto out;
+ } else {
+ lpfc_printf_log(phba, KERN_INFO, LOG_ELS,
+ "2624 RPI %x DID %x flg %x still "
+ "logged in\n",
+ ndlp->nlp_rpi, ndlp->nlp_DID,
+ ndlp->nlp_flag);
+ if (ndlp->nlp_flag & NLP_RPI_VALID)
+ ret = 1;
}
}
spin_unlock_irq(shost->host_lock);
@@ -4400,7 +4457,7 @@
*/
if (!(phba->hba_flag & HBA_FCOE_SUPPORT) ||
!(phba->fcf.fcf_flag & FCF_REGISTERED) ||
- (phba->cfg_enable_fip == 0)) {
+ (!(phba->hba_flag & HBA_FIP_SUPPORT))) {
spin_unlock_irq(&phba->hbalock);
return;
}
@@ -4409,6 +4466,8 @@
if (lpfc_fcf_inuse(phba))
return;
+ /* At this point, all discovery is aborted */
+ phba->pport->port_state = LPFC_VPORT_UNKNOWN;
/* Unregister VPIs */
vports = lpfc_create_vport_work_array(phba);
@@ -4416,8 +4475,8 @@
(phba->sli3_options & LPFC_SLI3_NPIV_ENABLED))
for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
lpfc_mbx_unreg_vpi(vports[i]);
- vports[i]->fc_flag |= FC_VPORT_NEEDS_REG_VPI;
- vports[i]->vfi_state &= ~LPFC_VFI_REGISTERED;
+ vports[i]->fc_flag |= FC_VPORT_NEEDS_INIT_VPI;
+ vports[i]->vpi_state &= ~LPFC_VPI_REGISTERED;
}
lpfc_destroy_vport_work_array(phba, vports);
@@ -4431,7 +4490,7 @@
return;
}
- lpfc_unreg_vfi(mbox, phba->pport->vfi);
+ lpfc_unreg_vfi(mbox, phba->pport);
mbox->vport = phba->pport;
mbox->mbox_cmpl = lpfc_unregister_vfi_cmpl;
@@ -4512,8 +4571,10 @@
/* Free the current connect table */
list_for_each_entry_safe(conn_entry, next_conn_entry,
- &phba->fcf_conn_rec_list, list)
+ &phba->fcf_conn_rec_list, list) {
+ list_del_init(&conn_entry->list);
kfree(conn_entry);
+ }
conn_hdr = (struct lpfc_fcf_conn_hdr *) buff;
record_count = conn_hdr->length * sizeof(uint32_t)/
@@ -4569,14 +4630,6 @@
(fcoe_param_hdr->length != FCOE_PARAM_LENGTH))
return;
- if (bf_get(lpfc_fip_param_hdr_fipp_mode, fcoe_param_hdr) ==
- FIPP_MODE_ON)
- phba->cfg_enable_fip = 1;
-
- if (bf_get(lpfc_fip_param_hdr_fipp_mode, fcoe_param_hdr) ==
- FIPP_MODE_OFF)
- phba->cfg_enable_fip = 0;
-
if (fcoe_param_hdr->parm_flags & FIPP_VLAN_VALID) {
phba->valid_vlan = 1;
phba->vlan_id = le16_to_cpu(fcoe_param->vlan_tag) &
diff --git a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h
index ccb2672..c9faa1d 100644
--- a/drivers/scsi/lpfc/lpfc_hw.h
+++ b/drivers/scsi/lpfc/lpfc_hw.h
@@ -1124,21 +1124,6 @@
/* Number of 4-byte words in an IOCB. */
#define IOCB_WORD_SZ 8
-/* defines for type field in fc header */
-#define FC_ELS_DATA 0x1
-#define FC_LLC_SNAP 0x5
-#define FC_FCP_DATA 0x8
-#define FC_COMMON_TRANSPORT_ULP 0x20
-
-/* defines for rctl field in fc header */
-#define FC_DEV_DATA 0x0
-#define FC_UNSOL_CTL 0x2
-#define FC_SOL_CTL 0x3
-#define FC_UNSOL_DATA 0x4
-#define FC_FCP_CMND 0x6
-#define FC_ELS_REQ 0x22
-#define FC_ELS_RSP 0x23
-
/* network headers for Dfctl field */
#define FC_NET_HDR 0x20
@@ -1183,6 +1168,8 @@
#define PCI_DEVICE_ID_ZEPHYR_DCSP 0xfe12
#define PCI_VENDOR_ID_SERVERENGINE 0x19a2
#define PCI_DEVICE_ID_TIGERSHARK 0x0704
+#define PCI_DEVICE_ID_TOMCAT 0x0714
+#define PCI_DEVICE_ID_FALCON 0xf180
#define JEDEC_ID_ADDRESS 0x0080001c
#define FIREFLY_JEDEC_ID 0x1ACC
@@ -1444,6 +1431,7 @@
#define CMD_ABORT_MXRI64_CN 0x8C
#define CMD_RCV_ELS_REQ64_CX 0x8D
#define CMD_XMIT_ELS_RSP64_CX 0x95
+#define CMD_XMIT_BLS_RSP64_CX 0x97
#define CMD_FCP_IWRITE64_CR 0x98
#define CMD_FCP_IWRITE64_CX 0x99
#define CMD_FCP_IREAD64_CR 0x9A
@@ -2306,8 +2294,7 @@
uint32_t rsvd1;
uint32_t rsvd2:8;
uint32_t sid:24;
- uint32_t rsvd3;
- uint32_t rsvd4;
+ uint32_t wwn[2];
uint32_t rsvd5;
uint16_t vfi;
uint16_t vpi;
@@ -2315,8 +2302,7 @@
uint32_t rsvd1;
uint32_t sid:24;
uint32_t rsvd2:8;
- uint32_t rsvd3;
- uint32_t rsvd4;
+ uint32_t wwn[2];
uint32_t rsvd5;
uint16_t vpi;
uint16_t vfi;
@@ -2326,7 +2312,13 @@
/* Structure for MB Command UNREG_VPI (0x97) */
typedef struct {
uint32_t rsvd1;
- uint32_t rsvd2;
+#ifdef __BIG_ENDIAN_BITFIELD
+ uint16_t rsvd2;
+ uint16_t sli4_vpi;
+#else /* __LITTLE_ENDIAN */
+ uint16_t sli4_vpi;
+ uint16_t rsvd2;
+#endif
uint32_t rsvd3;
uint32_t rsvd4;
uint32_t rsvd5;
@@ -3547,7 +3539,7 @@
ASYNCSTAT_FIELDS asyncstat; /* async_status iocb */
QUE_XRI64_CX_FIELDS quexri64cx; /* que_xri64_cx fields */
struct rcv_seq64 rcvseq64; /* RCV_SEQ64 and RCV_CONT64 */
-
+ struct sli4_bls_acc bls_acc; /* UNSOL ABTS BLS_ACC params */
uint32_t ulpWord[IOCB_WORD_SZ - 2]; /* generic 6 'words' */
} un;
union {
diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h
index 3689eee..1585148 100644
--- a/drivers/scsi/lpfc/lpfc_hw4.h
+++ b/drivers/scsi/lpfc/lpfc_hw4.h
@@ -194,6 +194,26 @@
#define lpfc_fip_flag_WORD word0
};
+struct sli4_bls_acc {
+ uint32_t word0_rsvd; /* Word0 must be reserved */
+ uint32_t word1;
+#define lpfc_abts_orig_SHIFT 0
+#define lpfc_abts_orig_MASK 0x00000001
+#define lpfc_abts_orig_WORD word1
+#define LPFC_ABTS_UNSOL_RSP 1
+#define LPFC_ABTS_UNSOL_INT 0
+ uint32_t word2;
+#define lpfc_abts_rxid_SHIFT 0
+#define lpfc_abts_rxid_MASK 0x0000FFFF
+#define lpfc_abts_rxid_WORD word2
+#define lpfc_abts_oxid_SHIFT 16
+#define lpfc_abts_oxid_MASK 0x0000FFFF
+#define lpfc_abts_oxid_WORD word2
+ uint32_t word3;
+ uint32_t word4;
+ uint32_t word5_rsvd; /* Word5 must be reserved */
+};
+
/* event queue entry structure */
struct lpfc_eqe {
uint32_t word0;
@@ -425,7 +445,7 @@
#define lpfc_wqe_gen_status_MASK 0x0000000F
#define lpfc_wqe_gen_status_WORD word7
#define lpfc_wqe_gen_ct_SHIFT 2
-#define lpfc_wqe_gen_ct_MASK 0x00000007
+#define lpfc_wqe_gen_ct_MASK 0x00000003
#define lpfc_wqe_gen_ct_WORD word7
uint32_t abort_tag;
uint32_t word9;
@@ -453,6 +473,13 @@
#define lpfc_wqe_gen_wqec_SHIFT 7
#define lpfc_wqe_gen_wqec_MASK 0x00000001
#define lpfc_wqe_gen_wqec_WORD word11
+#define ELS_ID_FLOGI 3
+#define ELS_ID_FDISC 2
+#define ELS_ID_LOGO 1
+#define ELS_ID_DEFAULT 0
+#define lpfc_wqe_gen_els_id_SHIFT 4
+#define lpfc_wqe_gen_els_id_MASK 0x00000003
+#define lpfc_wqe_gen_els_id_WORD word11
#define lpfc_wqe_gen_cmd_type_SHIFT 0
#define lpfc_wqe_gen_cmd_type_MASK 0x0000000F
#define lpfc_wqe_gen_cmd_type_WORD word11
@@ -487,8 +514,8 @@
#define LPFC_UERR_STATUS_HI 0x00A4
#define LPFC_UERR_STATUS_LO 0x00A0
-#define LPFC_ONLINE0 0x00B0
-#define LPFC_ONLINE1 0x00B4
+#define LPFC_UE_MASK_HI 0x00AC
+#define LPFC_UE_MASK_LO 0x00A8
#define LPFC_SCRATCHPAD 0x0058
/* BAR0 Registers */
@@ -760,6 +787,7 @@
#define LPFC_MBOX_OPCODE_MQ_DESTROY 0x35
#define LPFC_MBOX_OPCODE_CQ_DESTROY 0x36
#define LPFC_MBOX_OPCODE_EQ_DESTROY 0x37
+#define LPFC_MBOX_OPCODE_QUERY_FW_CFG 0x3A
#define LPFC_MBOX_OPCODE_FUNCTION_RESET 0x3D
/* FCoE Opcodes */
@@ -1273,6 +1301,51 @@
#define lpfc_mbx_del_fcf_tbl_index_WORD word10
};
+struct lpfc_mbx_query_fw_cfg {
+ struct mbox_header header;
+ uint32_t config_number;
+ uint32_t asic_rev;
+ uint32_t phys_port;
+ uint32_t function_mode;
+/* firmware Function Mode */
+#define lpfc_function_mode_toe_SHIFT 0
+#define lpfc_function_mode_toe_MASK 0x00000001
+#define lpfc_function_mode_toe_WORD function_mode
+#define lpfc_function_mode_nic_SHIFT 1
+#define lpfc_function_mode_nic_MASK 0x00000001
+#define lpfc_function_mode_nic_WORD function_mode
+#define lpfc_function_mode_rdma_SHIFT 2
+#define lpfc_function_mode_rdma_MASK 0x00000001
+#define lpfc_function_mode_rdma_WORD function_mode
+#define lpfc_function_mode_vm_SHIFT 3
+#define lpfc_function_mode_vm_MASK 0x00000001
+#define lpfc_function_mode_vm_WORD function_mode
+#define lpfc_function_mode_iscsi_i_SHIFT 4
+#define lpfc_function_mode_iscsi_i_MASK 0x00000001
+#define lpfc_function_mode_iscsi_i_WORD function_mode
+#define lpfc_function_mode_iscsi_t_SHIFT 5
+#define lpfc_function_mode_iscsi_t_MASK 0x00000001
+#define lpfc_function_mode_iscsi_t_WORD function_mode
+#define lpfc_function_mode_fcoe_i_SHIFT 6
+#define lpfc_function_mode_fcoe_i_MASK 0x00000001
+#define lpfc_function_mode_fcoe_i_WORD function_mode
+#define lpfc_function_mode_fcoe_t_SHIFT 7
+#define lpfc_function_mode_fcoe_t_MASK 0x00000001
+#define lpfc_function_mode_fcoe_t_WORD function_mode
+#define lpfc_function_mode_dal_SHIFT 8
+#define lpfc_function_mode_dal_MASK 0x00000001
+#define lpfc_function_mode_dal_WORD function_mode
+#define lpfc_function_mode_lro_SHIFT 9
+#define lpfc_function_mode_lro_MASK 0x00000001
+#define lpfc_function_mode_lro_WORD function_mode9
+#define lpfc_function_mode_flex10_SHIFT 10
+#define lpfc_function_mode_flex10_MASK 0x00000001
+#define lpfc_function_mode_flex10_WORD function_mode
+#define lpfc_function_mode_ncsi_SHIFT 11
+#define lpfc_function_mode_ncsi_MASK 0x00000001
+#define lpfc_function_mode_ncsi_WORD function_mode
+};
+
/* Status field for embedded SLI_CONFIG mailbox command */
#define STATUS_SUCCESS 0x0
#define STATUS_FAILED 0x1
@@ -1349,8 +1422,7 @@
#define lpfc_reg_vfi_fcfi_SHIFT 0
#define lpfc_reg_vfi_fcfi_MASK 0x0000FFFF
#define lpfc_reg_vfi_fcfi_WORD word2
- uint32_t word3_rsvd;
- uint32_t word4_rsvd;
+ uint32_t wwn[2];
struct ulp_bde64 bde;
uint32_t word8_rsvd;
uint32_t word9_rsvd;
@@ -1555,6 +1627,11 @@
#define lpfc_mbx_rd_rev_fcoe_SHIFT 20
#define lpfc_mbx_rd_rev_fcoe_MASK 0x00000001
#define lpfc_mbx_rd_rev_fcoe_WORD word1
+#define lpfc_mbx_rd_rev_cee_ver_SHIFT 21
+#define lpfc_mbx_rd_rev_cee_ver_MASK 0x00000003
+#define lpfc_mbx_rd_rev_cee_ver_WORD word1
+#define LPFC_PREDCBX_CEE_MODE 0
+#define LPFC_DCBX_CEE_MODE 1
#define lpfc_mbx_rd_rev_vpd_SHIFT 29
#define lpfc_mbx_rd_rev_vpd_MASK 0x00000001
#define lpfc_mbx_rd_rev_vpd_WORD word1
@@ -1804,6 +1881,7 @@
struct lpfc_mbx_read_config rd_config;
struct lpfc_mbx_request_features req_ftrs;
struct lpfc_mbx_post_hdr_tmpl hdr_tmpl;
+ struct lpfc_mbx_query_fw_cfg query_fw_cfg;
struct lpfc_mbx_nop nop;
} un;
};
@@ -1885,7 +1963,7 @@
};
struct lpfc_acqe_fcoe {
- uint32_t fcf_index;
+ uint32_t index;
uint32_t word1;
#define lpfc_acqe_fcoe_fcf_count_SHIFT 0
#define lpfc_acqe_fcoe_fcf_count_MASK 0x0000FFFF
@@ -1896,6 +1974,7 @@
#define LPFC_FCOE_EVENT_TYPE_NEW_FCF 0x1
#define LPFC_FCOE_EVENT_TYPE_FCF_TABLE_FULL 0x2
#define LPFC_FCOE_EVENT_TYPE_FCF_DEAD 0x3
+#define LPFC_FCOE_EVENT_TYPE_CVL 0x4
uint32_t event_tag;
uint32_t trailer;
};
@@ -1921,12 +2000,13 @@
#define SGL_ALIGN_SZ 64
#define SGL_PAGE_SIZE 4096
/* align SGL addr on a size boundary - adjust address up */
-#define NO_XRI ((uint16_t)-1)
+#define NO_XRI ((uint16_t)-1)
+
struct wqe_common {
uint32_t word6;
-#define wqe_xri_SHIFT 0
-#define wqe_xri_MASK 0x0000FFFF
-#define wqe_xri_WORD word6
+#define wqe_xri_tag_SHIFT 0
+#define wqe_xri_tag_MASK 0x0000FFFF
+#define wqe_xri_tag_WORD word6
#define wqe_ctxt_tag_SHIFT 16
#define wqe_ctxt_tag_MASK 0x0000FFFF
#define wqe_ctxt_tag_WORD word6
@@ -1987,7 +2067,7 @@
#define wqe_wqec_MASK 0x00000001
#define wqe_wqec_WORD word11
#define wqe_cqid_SHIFT 16
-#define wqe_cqid_MASK 0x000003ff
+#define wqe_cqid_MASK 0x0000ffff
#define wqe_cqid_WORD word11
};
@@ -1996,6 +2076,9 @@
#define wqe_els_did_SHIFT 0
#define wqe_els_did_MASK 0x00FFFFFF
#define wqe_els_did_WORD word5
+#define wqe_xmit_bls_pt_SHIFT 28
+#define wqe_xmit_bls_pt_MASK 0x00000003
+#define wqe_xmit_bls_pt_WORD word5
#define wqe_xmit_bls_ar_SHIFT 30
#define wqe_xmit_bls_ar_MASK 0x00000001
#define wqe_xmit_bls_ar_WORD word5
@@ -2044,6 +2127,23 @@
struct xmit_bls_rsp64_wqe {
uint32_t payload0;
+/* Payload0 for BA_ACC */
+#define xmit_bls_rsp64_acc_seq_id_SHIFT 16
+#define xmit_bls_rsp64_acc_seq_id_MASK 0x000000ff
+#define xmit_bls_rsp64_acc_seq_id_WORD payload0
+#define xmit_bls_rsp64_acc_seq_id_vald_SHIFT 24
+#define xmit_bls_rsp64_acc_seq_id_vald_MASK 0x000000ff
+#define xmit_bls_rsp64_acc_seq_id_vald_WORD payload0
+/* Payload0 for BA_RJT */
+#define xmit_bls_rsp64_rjt_vspec_SHIFT 0
+#define xmit_bls_rsp64_rjt_vspec_MASK 0x000000ff
+#define xmit_bls_rsp64_rjt_vspec_WORD payload0
+#define xmit_bls_rsp64_rjt_expc_SHIFT 8
+#define xmit_bls_rsp64_rjt_expc_MASK 0x000000ff
+#define xmit_bls_rsp64_rjt_expc_WORD payload0
+#define xmit_bls_rsp64_rjt_rsnc_SHIFT 16
+#define xmit_bls_rsp64_rjt_rsnc_MASK 0x000000ff
+#define xmit_bls_rsp64_rjt_rsnc_WORD payload0
uint32_t word1;
#define xmit_bls_rsp64_rxid_SHIFT 0
#define xmit_bls_rsp64_rxid_MASK 0x0000ffff
@@ -2052,18 +2152,19 @@
#define xmit_bls_rsp64_oxid_MASK 0x0000ffff
#define xmit_bls_rsp64_oxid_WORD word1
uint32_t word2;
-#define xmit_bls_rsp64_seqcntlo_SHIFT 0
-#define xmit_bls_rsp64_seqcntlo_MASK 0x0000ffff
-#define xmit_bls_rsp64_seqcntlo_WORD word2
-#define xmit_bls_rsp64_seqcnthi_SHIFT 16
+#define xmit_bls_rsp64_seqcnthi_SHIFT 0
#define xmit_bls_rsp64_seqcnthi_MASK 0x0000ffff
#define xmit_bls_rsp64_seqcnthi_WORD word2
+#define xmit_bls_rsp64_seqcntlo_SHIFT 16
+#define xmit_bls_rsp64_seqcntlo_MASK 0x0000ffff
+#define xmit_bls_rsp64_seqcntlo_WORD word2
uint32_t rsrvd3;
uint32_t rsrvd4;
struct wqe_did wqe_dest;
struct wqe_common wqe_com; /* words 6-11 */
uint32_t rsvd_12_15[4];
};
+
struct wqe_rctl_dfctl {
uint32_t word5;
#define wqe_si_SHIFT 2
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 562d8ce..226920d 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -28,6 +28,7 @@
#include <linux/pci.h>
#include <linux/spinlock.h>
#include <linux/ctype.h>
+#include <linux/aer.h>
#include <scsi/scsi.h>
#include <scsi/scsi_device.h>
@@ -645,7 +646,7 @@
* down the SLI Layer.
*
* Return codes
- * 0 - sucess.
+ * 0 - success.
* Any other value - error.
**/
static int
@@ -700,7 +701,7 @@
* down the SLI Layer.
*
* Return codes
- * 0 - sucess.
+ * 0 - success.
* Any other value - error.
**/
static int
@@ -755,7 +756,7 @@
* uninitialization after the HBA is reset when bring down the SLI Layer.
*
* Return codes
- * 0 - sucess.
+ * 0 - success.
* Any other value - error.
**/
int
@@ -852,12 +853,19 @@
void
lpfc_hb_timeout_handler(struct lpfc_hba *phba)
{
+ struct lpfc_vport **vports;
LPFC_MBOXQ_t *pmboxq;
struct lpfc_dmabuf *buf_ptr;
- int retval;
+ int retval, i;
struct lpfc_sli *psli = &phba->sli;
LIST_HEAD(completions);
+ vports = lpfc_create_vport_work_array(phba);
+ if (vports != NULL)
+ for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++)
+ lpfc_rcv_seq_check_edtov(vports[i]);
+ lpfc_destroy_vport_work_array(phba, vports);
+
if ((phba->link_state == LPFC_HBA_ERROR) ||
(phba->pport->load_flag & FC_UNLOADING) ||
(phba->pport->fc_flag & FC_OFFLINE_MODE))
@@ -1254,7 +1262,7 @@
* routine from the API jump table function pointer from the lpfc_hba struct.
*
* Return codes
- * 0 - sucess.
+ * 0 - success.
* Any other value - error.
**/
void
@@ -1521,10 +1529,10 @@
int GE = 0;
int oneConnect = 0; /* default is not a oneConnect */
struct {
- char * name;
- int max_speed;
- char * bus;
- } m = {"<Unknown>", 0, ""};
+ char *name;
+ char *bus;
+ char *function;
+ } m = {"<Unknown>", "", ""};
if (mdp && mdp[0] != '\0'
&& descp && descp[0] != '\0')
@@ -1545,132 +1553,155 @@
switch (dev_id) {
case PCI_DEVICE_ID_FIREFLY:
- m = (typeof(m)){"LP6000", max_speed, "PCI"};
+ m = (typeof(m)){"LP6000", "PCI", "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_SUPERFLY:
if (vp->rev.biuRev >= 1 && vp->rev.biuRev <= 3)
- m = (typeof(m)){"LP7000", max_speed, "PCI"};
+ m = (typeof(m)){"LP7000", "PCI",
+ "Fibre Channel Adapter"};
else
- m = (typeof(m)){"LP7000E", max_speed, "PCI"};
+ m = (typeof(m)){"LP7000E", "PCI",
+ "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_DRAGONFLY:
- m = (typeof(m)){"LP8000", max_speed, "PCI"};
+ m = (typeof(m)){"LP8000", "PCI",
+ "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_CENTAUR:
if (FC_JEDEC_ID(vp->rev.biuRev) == CENTAUR_2G_JEDEC_ID)
- m = (typeof(m)){"LP9002", max_speed, "PCI"};
+ m = (typeof(m)){"LP9002", "PCI",
+ "Fibre Channel Adapter"};
else
- m = (typeof(m)){"LP9000", max_speed, "PCI"};
+ m = (typeof(m)){"LP9000", "PCI",
+ "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_RFLY:
- m = (typeof(m)){"LP952", max_speed, "PCI"};
+ m = (typeof(m)){"LP952", "PCI",
+ "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_PEGASUS:
- m = (typeof(m)){"LP9802", max_speed, "PCI-X"};
+ m = (typeof(m)){"LP9802", "PCI-X",
+ "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_THOR:
- m = (typeof(m)){"LP10000", max_speed, "PCI-X"};
+ m = (typeof(m)){"LP10000", "PCI-X",
+ "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_VIPER:
- m = (typeof(m)){"LPX1000", max_speed, "PCI-X"};
+ m = (typeof(m)){"LPX1000", "PCI-X",
+ "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_PFLY:
- m = (typeof(m)){"LP982", max_speed, "PCI-X"};
+ m = (typeof(m)){"LP982", "PCI-X",
+ "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_TFLY:
- m = (typeof(m)){"LP1050", max_speed, "PCI-X"};
+ m = (typeof(m)){"LP1050", "PCI-X",
+ "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_HELIOS:
- m = (typeof(m)){"LP11000", max_speed, "PCI-X2"};
+ m = (typeof(m)){"LP11000", "PCI-X2",
+ "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_HELIOS_SCSP:
- m = (typeof(m)){"LP11000-SP", max_speed, "PCI-X2"};
+ m = (typeof(m)){"LP11000-SP", "PCI-X2",
+ "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_HELIOS_DCSP:
- m = (typeof(m)){"LP11002-SP", max_speed, "PCI-X2"};
+ m = (typeof(m)){"LP11002-SP", "PCI-X2",
+ "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_NEPTUNE:
- m = (typeof(m)){"LPe1000", max_speed, "PCIe"};
+ m = (typeof(m)){"LPe1000", "PCIe", "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_NEPTUNE_SCSP:
- m = (typeof(m)){"LPe1000-SP", max_speed, "PCIe"};
+ m = (typeof(m)){"LPe1000-SP", "PCIe", "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_NEPTUNE_DCSP:
- m = (typeof(m)){"LPe1002-SP", max_speed, "PCIe"};
+ m = (typeof(m)){"LPe1002-SP", "PCIe", "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_BMID:
- m = (typeof(m)){"LP1150", max_speed, "PCI-X2"};
+ m = (typeof(m)){"LP1150", "PCI-X2", "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_BSMB:
- m = (typeof(m)){"LP111", max_speed, "PCI-X2"};
+ m = (typeof(m)){"LP111", "PCI-X2", "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_ZEPHYR:
- m = (typeof(m)){"LPe11000", max_speed, "PCIe"};
+ m = (typeof(m)){"LPe11000", "PCIe", "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_ZEPHYR_SCSP:
- m = (typeof(m)){"LPe11000", max_speed, "PCIe"};
+ m = (typeof(m)){"LPe11000", "PCIe", "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_ZEPHYR_DCSP:
- m = (typeof(m)){"LP2105", max_speed, "PCIe"};
+ m = (typeof(m)){"LP2105", "PCIe", "FCoE Adapter"};
GE = 1;
break;
case PCI_DEVICE_ID_ZMID:
- m = (typeof(m)){"LPe1150", max_speed, "PCIe"};
+ m = (typeof(m)){"LPe1150", "PCIe", "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_ZSMB:
- m = (typeof(m)){"LPe111", max_speed, "PCIe"};
+ m = (typeof(m)){"LPe111", "PCIe", "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_LP101:
- m = (typeof(m)){"LP101", max_speed, "PCI-X"};
+ m = (typeof(m)){"LP101", "PCI-X", "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_LP10000S:
- m = (typeof(m)){"LP10000-S", max_speed, "PCI"};
+ m = (typeof(m)){"LP10000-S", "PCI", "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_LP11000S:
- m = (typeof(m)){"LP11000-S", max_speed,
- "PCI-X2"};
+ m = (typeof(m)){"LP11000-S", "PCI-X2", "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_LPE11000S:
- m = (typeof(m)){"LPe11000-S", max_speed,
- "PCIe"};
+ m = (typeof(m)){"LPe11000-S", "PCIe", "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_SAT:
- m = (typeof(m)){"LPe12000", max_speed, "PCIe"};
+ m = (typeof(m)){"LPe12000", "PCIe", "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_SAT_MID:
- m = (typeof(m)){"LPe1250", max_speed, "PCIe"};
+ m = (typeof(m)){"LPe1250", "PCIe", "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_SAT_SMB:
- m = (typeof(m)){"LPe121", max_speed, "PCIe"};
+ m = (typeof(m)){"LPe121", "PCIe", "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_SAT_DCSP:
- m = (typeof(m)){"LPe12002-SP", max_speed, "PCIe"};
+ m = (typeof(m)){"LPe12002-SP", "PCIe", "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_SAT_SCSP:
- m = (typeof(m)){"LPe12000-SP", max_speed, "PCIe"};
+ m = (typeof(m)){"LPe12000-SP", "PCIe", "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_SAT_S:
- m = (typeof(m)){"LPe12000-S", max_speed, "PCIe"};
+ m = (typeof(m)){"LPe12000-S", "PCIe", "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_HORNET:
- m = (typeof(m)){"LP21000", max_speed, "PCIe"};
+ m = (typeof(m)){"LP21000", "PCIe", "FCoE Adapter"};
GE = 1;
break;
case PCI_DEVICE_ID_PROTEUS_VF:
- m = (typeof(m)) {"LPev12000", max_speed, "PCIe IOV"};
+ m = (typeof(m)){"LPev12000", "PCIe IOV",
+ "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_PROTEUS_PF:
- m = (typeof(m)) {"LPev12000", max_speed, "PCIe IOV"};
+ m = (typeof(m)){"LPev12000", "PCIe IOV",
+ "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_PROTEUS_S:
- m = (typeof(m)) {"LPemv12002-S", max_speed, "PCIe IOV"};
+ m = (typeof(m)){"LPemv12002-S", "PCIe IOV",
+ "Fibre Channel Adapter"};
break;
case PCI_DEVICE_ID_TIGERSHARK:
oneConnect = 1;
- m = (typeof(m)) {"OCe10100-F", max_speed, "PCIe"};
+ m = (typeof(m)){"OCe10100", "PCIe", "FCoE"};
+ break;
+ case PCI_DEVICE_ID_TOMCAT:
+ oneConnect = 1;
+ m = (typeof(m)){"OCe11100", "PCIe", "FCoE"};
+ break;
+ case PCI_DEVICE_ID_FALCON:
+ m = (typeof(m)){"LPSe12002-ML1-E", "PCIe",
+ "EmulexSecure Fibre"};
break;
default:
- m = (typeof(m)){ NULL };
+ m = (typeof(m)){"Unknown", "", ""};
break;
}
@@ -1682,17 +1713,14 @@
if (descp && descp[0] == '\0') {
if (oneConnect)
snprintf(descp, 255,
- "Emulex OneConnect %s, FCoE Initiator, Port %s",
- m.name,
+ "Emulex OneConnect %s, %s Initiator, Port %s",
+ m.name, m.function,
phba->Port);
else
snprintf(descp, 255,
"Emulex %s %d%s %s %s",
- m.name, m.max_speed,
- (GE) ? "GE" : "Gb",
- m.bus,
- (GE) ? "FCoE Adapter" :
- "Fibre Channel Adapter");
+ m.name, max_speed, (GE) ? "GE" : "Gb",
+ m.bus, m.function);
}
}
@@ -2217,7 +2245,7 @@
if (vports[i]->load_flag & FC_UNLOADING)
continue;
- vports[i]->vfi_state &= ~LPFC_VFI_REGISTERED;
+ vports[i]->vpi_state &= ~LPFC_VPI_REGISTERED;
shost = lpfc_shost_from_vport(vports[i]);
list_for_each_entry_safe(ndlp, next_ndlp,
&vports[i]->fc_nodes,
@@ -2308,6 +2336,7 @@
spin_lock_irq(&phba->hbalock);
/* Release all the lpfc_scsi_bufs maintained by this host. */
+ spin_lock(&phba->scsi_buf_list_lock);
list_for_each_entry_safe(sb, sb_next, &phba->lpfc_scsi_buf_list, list) {
list_del(&sb->list);
pci_pool_free(phba->lpfc_scsi_dma_buf_pool, sb->data,
@@ -2315,6 +2344,7 @@
kfree(sb);
phba->total_scsi_bufs--;
}
+ spin_unlock(&phba->scsi_buf_list_lock);
/* Release all the lpfc_iocbq entries maintained by this host. */
list_for_each_entry_safe(io, io_next, &phba->lpfc_iocb_list, list) {
@@ -2322,9 +2352,7 @@
kfree(io);
phba->total_iocbq_bufs--;
}
-
spin_unlock_irq(&phba->hbalock);
-
return 0;
}
@@ -2408,7 +2436,7 @@
vport->els_tmofunc.function = lpfc_els_timeout;
vport->els_tmofunc.data = (unsigned long)vport;
- error = scsi_add_host(shost, dev);
+ error = scsi_add_host_with_dma(shost, dev, &phba->pcidev->dev);
if (error)
goto out_put_shost;
@@ -2699,6 +2727,63 @@
}
/**
+ * lpfc_sli4_fw_cfg_check - Read the firmware config and verify FCoE support
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This function uses the QUERY_FW_CFG mailbox command to determine if the
+ * firmware loaded supports FCoE. A return of zero indicates that the mailbox
+ * was successful and the firmware supports FCoE. Any other return indicates
+ * a error. It is assumed that this function will be called before interrupts
+ * are enabled.
+ **/
+static int
+lpfc_sli4_fw_cfg_check(struct lpfc_hba *phba)
+{
+ int rc = 0;
+ LPFC_MBOXQ_t *mboxq;
+ struct lpfc_mbx_query_fw_cfg *query_fw_cfg;
+ uint32_t length;
+ uint32_t shdr_status, shdr_add_status;
+
+ mboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!mboxq) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2621 Failed to allocate mbox for "
+ "query firmware config cmd\n");
+ return -ENOMEM;
+ }
+ query_fw_cfg = &mboxq->u.mqe.un.query_fw_cfg;
+ length = (sizeof(struct lpfc_mbx_query_fw_cfg) -
+ sizeof(struct lpfc_sli4_cfg_mhdr));
+ lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_COMMON,
+ LPFC_MBOX_OPCODE_QUERY_FW_CFG,
+ length, LPFC_SLI4_MBX_EMBED);
+ rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+ /* The IOCTL status is embedded in the mailbox subheader. */
+ shdr_status = bf_get(lpfc_mbox_hdr_status,
+ &query_fw_cfg->header.cfg_shdr.response);
+ shdr_add_status = bf_get(lpfc_mbox_hdr_add_status,
+ &query_fw_cfg->header.cfg_shdr.response);
+ if (shdr_status || shdr_add_status || rc != MBX_SUCCESS) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "2622 Query Firmware Config failed "
+ "mbx status x%x, status x%x add_status x%x\n",
+ rc, shdr_status, shdr_add_status);
+ return -EINVAL;
+ }
+ if (!bf_get(lpfc_function_mode_fcoe_i, query_fw_cfg)) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "2623 FCoE Function not supported by firmware. "
+ "Function mode = %08x\n",
+ query_fw_cfg->function_mode);
+ return -EINVAL;
+ }
+ if (rc != MBX_TIMEOUT)
+ mempool_free(mboxq, phba->mbox_mem_pool);
+ return 0;
+}
+
+/**
* lpfc_sli4_parse_latt_fault - Parse sli4 link-attention link fault code
* @phba: pointer to lpfc hba data structure.
* @acqe_link: pointer to the async link completion queue entry.
@@ -2918,13 +3003,17 @@
{
uint8_t event_type = bf_get(lpfc_acqe_fcoe_event_type, acqe_fcoe);
int rc;
+ struct lpfc_vport *vport;
+ struct lpfc_nodelist *ndlp;
+ struct Scsi_Host *shost;
+ phba->fc_eventTag = acqe_fcoe->event_tag;
phba->fcoe_eventtag = acqe_fcoe->event_tag;
switch (event_type) {
case LPFC_FCOE_EVENT_TYPE_NEW_FCF:
lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY,
"2546 New FCF found index 0x%x tag 0x%x\n",
- acqe_fcoe->fcf_index,
+ acqe_fcoe->index,
acqe_fcoe->event_tag);
/*
* If the current FCF is in discovered state, or
@@ -2939,12 +3028,11 @@
spin_unlock_irq(&phba->hbalock);
/* Read the FCF table and re-discover SAN. */
- rc = lpfc_sli4_read_fcf_record(phba,
- LPFC_FCOE_FCF_GET_FIRST);
+ rc = lpfc_sli4_read_fcf_record(phba, LPFC_FCOE_FCF_GET_FIRST);
if (rc)
lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY,
- "2547 Read FCF record failed 0x%x\n",
- rc);
+ "2547 Read FCF record failed 0x%x\n",
+ rc);
break;
case LPFC_FCOE_EVENT_TYPE_FCF_TABLE_FULL:
@@ -2956,11 +3044,11 @@
case LPFC_FCOE_EVENT_TYPE_FCF_DEAD:
lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY,
- "2549 FCF disconnected fron network index 0x%x"
- " tag 0x%x\n", acqe_fcoe->fcf_index,
+ "2549 FCF disconnected from network index 0x%x"
+ " tag 0x%x\n", acqe_fcoe->index,
acqe_fcoe->event_tag);
/* If the event is not for currently used fcf do nothing */
- if (phba->fcf.fcf_indx != acqe_fcoe->fcf_index)
+ if (phba->fcf.fcf_indx != acqe_fcoe->index)
break;
/*
* Currently, driver support only one FCF - so treat this as
@@ -2970,7 +3058,28 @@
/* Unregister FCF if no devices connected to it */
lpfc_unregister_unused_fcf(phba);
break;
-
+ case LPFC_FCOE_EVENT_TYPE_CVL:
+ lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY,
+ "2718 Clear Virtual Link Received for VPI 0x%x"
+ " tag 0x%x\n", acqe_fcoe->index, acqe_fcoe->event_tag);
+ vport = lpfc_find_vport_by_vpid(phba,
+ acqe_fcoe->index - phba->vpi_base);
+ if (!vport)
+ break;
+ ndlp = lpfc_findnode_did(vport, Fabric_DID);
+ if (!ndlp)
+ break;
+ shost = lpfc_shost_from_vport(vport);
+ lpfc_linkdown_port(vport);
+ if (vport->port_type != LPFC_NPIV_PORT) {
+ mod_timer(&ndlp->nlp_delayfunc, jiffies + HZ);
+ spin_lock_irq(shost->host_lock);
+ ndlp->nlp_flag |= NLP_DELAY_TMO;
+ spin_unlock_irq(shost->host_lock);
+ ndlp->nlp_last_elscmd = ELS_CMD_FLOGI;
+ vport->port_state = LPFC_FLOGI;
+ }
+ break;
default:
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
"0288 Unknown FCoE event type 0x%x event tag "
@@ -2990,6 +3099,7 @@
lpfc_sli4_async_dcbx_evt(struct lpfc_hba *phba,
struct lpfc_acqe_dcbx *acqe_dcbx)
{
+ phba->fc_eventTag = acqe_dcbx->event_tag;
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
"0290 The SLI4 DCBX asynchronous event is not "
"handled yet\n");
@@ -3124,7 +3234,7 @@
* PCI devices.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* other values - error
**/
static int
@@ -3220,7 +3330,7 @@
* support the SLI-3 HBA device it attached to.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* other values - error
**/
static int
@@ -3321,7 +3431,7 @@
* support the SLI-4 HBA device it attached to.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* other values - error
**/
static int
@@ -3432,7 +3542,7 @@
/* Driver internel slow-path CQ Event pool */
INIT_LIST_HEAD(&phba->sli4_hba.sp_cqe_event_pool);
/* Response IOCB work queue list */
- INIT_LIST_HEAD(&phba->sli4_hba.sp_rspiocb_work_queue);
+ INIT_LIST_HEAD(&phba->sli4_hba.sp_queue_event);
/* Asynchronous event CQ Event work queue list */
INIT_LIST_HEAD(&phba->sli4_hba.sp_asynce_work_queue);
/* Fast-path XRI aborted CQ Event work queue list */
@@ -3461,6 +3571,10 @@
if (unlikely(rc))
goto out_free_bsmbx;
+ rc = lpfc_sli4_fw_cfg_check(phba);
+ if (unlikely(rc))
+ goto out_free_bsmbx;
+
/* Set up the hba's configuration parameters. */
rc = lpfc_sli4_read_config(phba);
if (unlikely(rc))
@@ -3594,8 +3708,10 @@
/* Free the current connect table */
list_for_each_entry_safe(conn_entry, next_conn_entry,
- &phba->fcf_conn_rec_list, list)
+ &phba->fcf_conn_rec_list, list) {
+ list_del_init(&conn_entry->list);
kfree(conn_entry);
+ }
return;
}
@@ -3642,7 +3758,7 @@
* device specific resource setup to support the HBA device it attached to.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* other values - error
**/
static int
@@ -3688,7 +3804,7 @@
* device specific resource setup to support the HBA device it attached to.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* other values - error
**/
static int
@@ -3753,7 +3869,7 @@
* list and set up the IOCB tag array accordingly.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* other values - error
**/
static int
@@ -3824,7 +3940,7 @@
rc = lpfc_sli4_remove_all_sgl_pages(phba);
if (rc) {
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
- "2005 Unable to deregister pages from HBA: %x", rc);
+ "2005 Unable to deregister pages from HBA: %x\n", rc);
}
kfree(phba->sli4_hba.lpfc_els_sgl_array);
}
@@ -3872,7 +3988,7 @@
* list and set up the sgl xritag tag array accordingly.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* other values - error
**/
static int
@@ -3986,7 +4102,7 @@
* enabled and the driver is reinitializing the device.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* ENOMEM - No availble memory
* EIO - The mailbox failed to complete successfully.
**/
@@ -4146,7 +4262,7 @@
* PCI device data structure is set.
*
* Return codes
- * pointer to @phba - sucessful
+ * pointer to @phba - successful
* NULL - error
**/
static struct lpfc_hba *
@@ -4202,7 +4318,7 @@
* host with it.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* other values - error
**/
static int
@@ -4273,7 +4389,8 @@
_dump_buf_data =
(char *) __get_free_pages(GFP_KERNEL, pagecnt);
if (_dump_buf_data) {
- printk(KERN_ERR "BLKGRD allocated %d pages for "
+ lpfc_printf_log(phba, KERN_ERR, LOG_BG,
+ "9043 BLKGRD: allocated %d pages for "
"_dump_buf_data at 0x%p\n",
(1 << pagecnt), _dump_buf_data);
_dump_buf_data_order = pagecnt;
@@ -4284,17 +4401,20 @@
--pagecnt;
}
if (!_dump_buf_data_order)
- printk(KERN_ERR "BLKGRD ERROR unable to allocate "
+ lpfc_printf_log(phba, KERN_ERR, LOG_BG,
+ "9044 BLKGRD: ERROR unable to allocate "
"memory for hexdump\n");
} else
- printk(KERN_ERR "BLKGRD already allocated _dump_buf_data=0x%p"
+ lpfc_printf_log(phba, KERN_ERR, LOG_BG,
+ "9045 BLKGRD: already allocated _dump_buf_data=0x%p"
"\n", _dump_buf_data);
if (!_dump_buf_dif) {
while (pagecnt) {
_dump_buf_dif =
(char *) __get_free_pages(GFP_KERNEL, pagecnt);
if (_dump_buf_dif) {
- printk(KERN_ERR "BLKGRD allocated %d pages for "
+ lpfc_printf_log(phba, KERN_ERR, LOG_BG,
+ "9046 BLKGRD: allocated %d pages for "
"_dump_buf_dif at 0x%p\n",
(1 << pagecnt), _dump_buf_dif);
_dump_buf_dif_order = pagecnt;
@@ -4305,10 +4425,12 @@
--pagecnt;
}
if (!_dump_buf_dif_order)
- printk(KERN_ERR "BLKGRD ERROR unable to allocate "
+ lpfc_printf_log(phba, KERN_ERR, LOG_BG,
+ "9047 BLKGRD: ERROR unable to allocate "
"memory for hexdump\n");
} else
- printk(KERN_ERR "BLKGRD already allocated _dump_buf_dif=0x%p\n",
+ lpfc_printf_log(phba, KERN_ERR, LOG_BG,
+ "9048 BLKGRD: already allocated _dump_buf_dif=0x%p\n",
_dump_buf_dif);
}
@@ -4365,7 +4487,7 @@
* with SLI-3 interface spec.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* other values - error
**/
static int
@@ -4512,7 +4634,6 @@
lpfc_sli4_post_status_check(struct lpfc_hba *phba)
{
struct lpfc_register sta_reg, uerrlo_reg, uerrhi_reg, scratchpad;
- uint32_t onlnreg0, onlnreg1;
int i, port_error = -ENODEV;
if (!phba->sli4_hba.STAregaddr)
@@ -4556,21 +4677,20 @@
bf_get(lpfc_scratchpad_slirev, &scratchpad),
bf_get(lpfc_scratchpad_featurelevel1, &scratchpad),
bf_get(lpfc_scratchpad_featurelevel2, &scratchpad));
-
+ phba->sli4_hba.ue_mask_lo = readl(phba->sli4_hba.UEMASKLOregaddr);
+ phba->sli4_hba.ue_mask_hi = readl(phba->sli4_hba.UEMASKHIregaddr);
/* With uncoverable error, log the error message and return error */
- onlnreg0 = readl(phba->sli4_hba.ONLINE0regaddr);
- onlnreg1 = readl(phba->sli4_hba.ONLINE1regaddr);
- if ((onlnreg0 != LPFC_ONLINE_NERR) || (onlnreg1 != LPFC_ONLINE_NERR)) {
- uerrlo_reg.word0 = readl(phba->sli4_hba.UERRLOregaddr);
- uerrhi_reg.word0 = readl(phba->sli4_hba.UERRHIregaddr);
- if (uerrlo_reg.word0 || uerrhi_reg.word0) {
- lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "1422 HBA Unrecoverable error: "
- "uerr_lo_reg=0x%x, uerr_hi_reg=0x%x, "
- "online0_reg=0x%x, online1_reg=0x%x\n",
- uerrlo_reg.word0, uerrhi_reg.word0,
- onlnreg0, onlnreg1);
- }
+ uerrlo_reg.word0 = readl(phba->sli4_hba.UERRLOregaddr);
+ uerrhi_reg.word0 = readl(phba->sli4_hba.UERRHIregaddr);
+ if ((~phba->sli4_hba.ue_mask_lo & uerrlo_reg.word0) ||
+ (~phba->sli4_hba.ue_mask_hi & uerrhi_reg.word0)) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1422 HBA Unrecoverable error: "
+ "uerr_lo_reg=0x%x, uerr_hi_reg=0x%x, "
+ "ue_mask_lo_reg=0x%x, ue_mask_hi_reg=0x%x\n",
+ uerrlo_reg.word0, uerrhi_reg.word0,
+ phba->sli4_hba.ue_mask_lo,
+ phba->sli4_hba.ue_mask_hi);
return -ENODEV;
}
@@ -4591,10 +4711,10 @@
LPFC_UERR_STATUS_LO;
phba->sli4_hba.UERRHIregaddr = phba->sli4_hba.conf_regs_memmap_p +
LPFC_UERR_STATUS_HI;
- phba->sli4_hba.ONLINE0regaddr = phba->sli4_hba.conf_regs_memmap_p +
- LPFC_ONLINE0;
- phba->sli4_hba.ONLINE1regaddr = phba->sli4_hba.conf_regs_memmap_p +
- LPFC_ONLINE1;
+ phba->sli4_hba.UEMASKLOregaddr = phba->sli4_hba.conf_regs_memmap_p +
+ LPFC_UE_MASK_LO;
+ phba->sli4_hba.UEMASKHIregaddr = phba->sli4_hba.conf_regs_memmap_p +
+ LPFC_UE_MASK_HI;
phba->sli4_hba.SCRATCHPADregaddr = phba->sli4_hba.conf_regs_memmap_p +
LPFC_SCRATCHPAD;
}
@@ -4662,7 +4782,7 @@
* this routine.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* ENOMEM - could not allocated memory.
**/
static int
@@ -4761,7 +4881,7 @@
* allocation for the port.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* ENOMEM - No availble memory
* EIO - The mailbox failed to complete successfully.
**/
@@ -4825,7 +4945,8 @@
phba->vpi_base = phba->sli4_hba.max_cfg_param.vpi_base;
phba->vfi_base = phba->sli4_hba.max_cfg_param.vfi_base;
phba->sli4_hba.next_rpi = phba->sli4_hba.max_cfg_param.rpi_base;
- phba->max_vpi = phba->sli4_hba.max_cfg_param.max_vpi;
+ phba->max_vpi = (phba->sli4_hba.max_cfg_param.max_vpi > 0) ?
+ (phba->sli4_hba.max_cfg_param.max_vpi - 1) : 0;
phba->max_vports = phba->max_vpi;
lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
"2003 cfg params XRI(B:%d M:%d), "
@@ -4861,7 +4982,7 @@
* HBA consistent with the SLI-4 interface spec.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* ENOMEM - No availble memory
* EIO - The mailbox failed to complete successfully.
**/
@@ -4910,7 +5031,7 @@
* we just use some constant number as place holder.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* ENOMEM - No availble memory
* EIO - The mailbox failed to complete successfully.
**/
@@ -4979,10 +5100,9 @@
/* It does not make sense to have more EQs than WQs */
if (cfg_fcp_eq_count > phba->cfg_fcp_wq_count) {
lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
- "2593 The number of FCP EQs (%d) is more "
- "than the number of FCP WQs (%d), take "
- "the number of FCP EQs same as than of "
- "WQs (%d)\n", cfg_fcp_eq_count,
+ "2593 The FCP EQ count(%d) cannot be greater "
+ "than the FCP WQ count(%d), limiting the "
+ "FCP EQ count to %d\n", cfg_fcp_eq_count,
phba->cfg_fcp_wq_count,
phba->cfg_fcp_wq_count);
cfg_fcp_eq_count = phba->cfg_fcp_wq_count;
@@ -5058,15 +5178,6 @@
}
phba->sli4_hba.els_cq = qdesc;
- /* Create slow-path Unsolicited Receive Complete Queue */
- qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.cq_esize,
- phba->sli4_hba.cq_ecount);
- if (!qdesc) {
- lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "0502 Failed allocate slow-path USOL RX CQ\n");
- goto out_free_els_cq;
- }
- phba->sli4_hba.rxq_cq = qdesc;
/* Create fast-path FCP Completion Queue(s), one-to-one with EQs */
phba->sli4_hba.fcp_cq = kzalloc((sizeof(struct lpfc_queue *) *
@@ -5075,7 +5186,7 @@
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"2577 Failed allocate memory for fast-path "
"CQ record array\n");
- goto out_free_rxq_cq;
+ goto out_free_els_cq;
}
for (fcp_cqidx = 0; fcp_cqidx < phba->cfg_fcp_eq_count; fcp_cqidx++) {
qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.cq_esize,
@@ -5188,9 +5299,6 @@
phba->sli4_hba.fcp_cq[fcp_cqidx] = NULL;
}
kfree(phba->sli4_hba.fcp_cq);
-out_free_rxq_cq:
- lpfc_sli4_queue_free(phba->sli4_hba.rxq_cq);
- phba->sli4_hba.rxq_cq = NULL;
out_free_els_cq:
lpfc_sli4_queue_free(phba->sli4_hba.els_cq);
phba->sli4_hba.els_cq = NULL;
@@ -5218,7 +5326,7 @@
* operation.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* ENOMEM - No availble memory
* EIO - The mailbox failed to complete successfully.
**/
@@ -5247,10 +5355,6 @@
lpfc_sli4_queue_free(phba->sli4_hba.dat_rq);
phba->sli4_hba.dat_rq = NULL;
- /* Release unsolicited receive complete queue */
- lpfc_sli4_queue_free(phba->sli4_hba.rxq_cq);
- phba->sli4_hba.rxq_cq = NULL;
-
/* Release ELS complete queue */
lpfc_sli4_queue_free(phba->sli4_hba.els_cq);
phba->sli4_hba.els_cq = NULL;
@@ -5286,7 +5390,7 @@
* operation.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* ENOMEM - No availble memory
* EIO - The mailbox failed to complete successfully.
**/
@@ -5383,25 +5487,6 @@
phba->sli4_hba.els_cq->queue_id,
phba->sli4_hba.sp_eq->queue_id);
- /* Set up slow-path Unsolicited Receive Complete Queue */
- if (!phba->sli4_hba.rxq_cq) {
- lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "0532 USOL RX CQ not allocated\n");
- goto out_destroy_els_cq;
- }
- rc = lpfc_cq_create(phba, phba->sli4_hba.rxq_cq, phba->sli4_hba.sp_eq,
- LPFC_RCQ, LPFC_USOL);
- if (rc) {
- lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "0533 Failed setup of slow-path USOL RX CQ: "
- "rc = 0x%x\n", rc);
- goto out_destroy_els_cq;
- }
- lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
- "2587 USL CQ setup: cq-id=%d, parent eq-id=%d\n",
- phba->sli4_hba.rxq_cq->queue_id,
- phba->sli4_hba.sp_eq->queue_id);
-
/* Set up fast-path FCP Response Complete Queue */
for (fcp_cqidx = 0; fcp_cqidx < phba->cfg_fcp_eq_count; fcp_cqidx++) {
if (!phba->sli4_hba.fcp_cq[fcp_cqidx]) {
@@ -5507,7 +5592,7 @@
goto out_destroy_fcp_wq;
}
rc = lpfc_rq_create(phba, phba->sli4_hba.hdr_rq, phba->sli4_hba.dat_rq,
- phba->sli4_hba.rxq_cq, LPFC_USOL);
+ phba->sli4_hba.els_cq, LPFC_USOL);
if (rc) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0541 Failed setup of Receive Queue: "
@@ -5519,7 +5604,7 @@
"parent cq-id=%d\n",
phba->sli4_hba.hdr_rq->queue_id,
phba->sli4_hba.dat_rq->queue_id,
- phba->sli4_hba.rxq_cq->queue_id);
+ phba->sli4_hba.els_cq->queue_id);
return 0;
out_destroy_fcp_wq:
@@ -5531,8 +5616,6 @@
out_destroy_fcp_cq:
for (--fcp_cqidx; fcp_cqidx >= 0; fcp_cqidx--)
lpfc_cq_destroy(phba, phba->sli4_hba.fcp_cq[fcp_cqidx]);
- lpfc_cq_destroy(phba, phba->sli4_hba.rxq_cq);
-out_destroy_els_cq:
lpfc_cq_destroy(phba, phba->sli4_hba.els_cq);
out_destroy_mbx_cq:
lpfc_cq_destroy(phba, phba->sli4_hba.mbx_cq);
@@ -5552,7 +5635,7 @@
* operation.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* ENOMEM - No availble memory
* EIO - The mailbox failed to complete successfully.
**/
@@ -5574,8 +5657,6 @@
lpfc_cq_destroy(phba, phba->sli4_hba.mbx_cq);
/* Unset ELS complete queue */
lpfc_cq_destroy(phba, phba->sli4_hba.els_cq);
- /* Unset unsolicited receive complete queue */
- lpfc_cq_destroy(phba, phba->sli4_hba.rxq_cq);
/* Unset FCP response complete queue */
for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_eq_count; fcp_qidx++)
lpfc_cq_destroy(phba, phba->sli4_hba.fcp_cq[fcp_qidx]);
@@ -5599,7 +5680,7 @@
* Later, this can be used for all the slow-path events.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* -ENOMEM - No availble memory
**/
static int
@@ -5760,7 +5841,7 @@
* all resources assigned to the PCI function which originates this request.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* ENOMEM - No availble memory
* EIO - The mailbox failed to complete successfully.
**/
@@ -5923,7 +6004,7 @@
* with SLI-4 interface spec.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* other values - error
**/
static int
@@ -6052,7 +6133,7 @@
* will be left with MSI-X enabled and leaks its vectors.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* other values - error
**/
static int
@@ -6184,7 +6265,7 @@
* is done in this function.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* other values - error
*/
static int
@@ -6243,7 +6324,7 @@
* MSI-X -> MSI -> IRQ.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* other values - error
**/
static uint32_t
@@ -6333,7 +6414,7 @@
* enabled and leaks its vectors.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* other values - error
**/
static int
@@ -6443,7 +6524,7 @@
* which is done in this function.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* other values - error
**/
static int
@@ -6508,7 +6589,7 @@
* MSI-X -> MSI -> IRQ.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* other values - error
**/
static uint32_t
@@ -6722,6 +6803,7 @@
{
struct lpfc_hba *phba;
struct lpfc_vport *vport = NULL;
+ struct Scsi_Host *shost = NULL;
int error;
uint32_t cfg_mode, intr_mode;
@@ -6800,6 +6882,7 @@
goto out_destroy_shost;
}
+ shost = lpfc_shost_from_vport(vport); /* save shost for error cleanup */
/* Now, trying to enable interrupt and bring up the device */
cfg_mode = phba->cfg_use_msi;
while (true) {
@@ -6866,6 +6949,8 @@
lpfc_sli_pci_mem_unset(phba);
out_disable_pci_dev:
lpfc_disable_pci_dev(phba);
+ if (shost)
+ scsi_host_put(shost);
out_free_phba:
lpfc_hba_free(phba);
return error;
@@ -7036,6 +7121,7 @@
/* Restore device state from PCI config space */
pci_set_power_state(pdev, PCI_D0);
pci_restore_state(pdev);
+
if (pdev->is_busmaster)
pci_set_master(pdev);
@@ -7070,6 +7156,75 @@
}
/**
+ * lpfc_sli_prep_dev_for_recover - Prepare SLI3 device for pci slot recover
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is called to prepare the SLI3 device for PCI slot recover. It
+ * aborts and stops all the on-going I/Os on the pci device.
+ **/
+static void
+lpfc_sli_prep_dev_for_recover(struct lpfc_hba *phba)
+{
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2723 PCI channel I/O abort preparing for recovery\n");
+ /* Prepare for bringing HBA offline */
+ lpfc_offline_prep(phba);
+ /* Clear sli active flag to prevent sysfs access to HBA */
+ spin_lock_irq(&phba->hbalock);
+ phba->sli.sli_flag &= ~LPFC_SLI_ACTIVE;
+ spin_unlock_irq(&phba->hbalock);
+ /* Stop and flush all I/Os and bring HBA offline */
+ lpfc_offline(phba);
+}
+
+/**
+ * lpfc_sli_prep_dev_for_reset - Prepare SLI3 device for pci slot reset
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is called to prepare the SLI3 device for PCI slot reset. It
+ * disables the device interrupt and pci device, and aborts the internal FCP
+ * pending I/Os.
+ **/
+static void
+lpfc_sli_prep_dev_for_reset(struct lpfc_hba *phba)
+{
+ struct lpfc_sli *psli = &phba->sli;
+ struct lpfc_sli_ring *pring;
+
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2710 PCI channel disable preparing for reset\n");
+ /* Disable interrupt and pci device */
+ lpfc_sli_disable_intr(phba);
+ pci_disable_device(phba->pcidev);
+ /*
+ * There may be I/Os dropped by the firmware.
+ * Error iocb (I/O) on txcmplq and let the SCSI layer
+ * retry it after re-establishing link.
+ */
+ pring = &psli->ring[psli->fcp_ring];
+ lpfc_sli_abort_iocb_ring(phba, pring);
+}
+
+/**
+ * lpfc_sli_prep_dev_for_perm_failure - Prepare SLI3 dev for pci slot disable
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is called to prepare the SLI3 device for PCI slot permanently
+ * disabling. It blocks the SCSI transport layer traffic and flushes the FCP
+ * pending I/Os.
+ **/
+static void
+lpfc_prep_dev_for_perm_failure(struct lpfc_hba *phba)
+{
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2711 PCI channel permanent disable for failure\n");
+ /* Block all SCSI devices' I/Os on the host */
+ lpfc_scsi_dev_block(phba);
+ /* Clean up all driver's outstanding SCSI I/Os */
+ lpfc_sli_flush_fcp_rings(phba);
+}
+
+/**
* lpfc_io_error_detected_s3 - Method for handling SLI-3 device PCI I/O error
* @pdev: pointer to PCI device.
* @state: the current PCI connection state.
@@ -7083,6 +7238,7 @@
* as desired.
*
* Return codes
+ * PCI_ERS_RESULT_CAN_RECOVER - can be recovered with reset_link
* PCI_ERS_RESULT_NEED_RESET - need to reset before recovery
* PCI_ERS_RESULT_DISCONNECT - device could not be recovered
**/
@@ -7091,33 +7247,27 @@
{
struct Scsi_Host *shost = pci_get_drvdata(pdev);
struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
- struct lpfc_sli *psli = &phba->sli;
- struct lpfc_sli_ring *pring;
- if (state == pci_channel_io_perm_failure) {
- lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "0472 PCI channel I/O permanent failure\n");
- /* Block all SCSI devices' I/Os on the host */
- lpfc_scsi_dev_block(phba);
- /* Clean up all driver's outstanding SCSI I/Os */
- lpfc_sli_flush_fcp_rings(phba);
+ switch (state) {
+ case pci_channel_io_normal:
+ /* Non-fatal error, prepare for recovery */
+ lpfc_sli_prep_dev_for_recover(phba);
+ return PCI_ERS_RESULT_CAN_RECOVER;
+ case pci_channel_io_frozen:
+ /* Fatal error, prepare for slot reset */
+ lpfc_sli_prep_dev_for_reset(phba);
+ return PCI_ERS_RESULT_NEED_RESET;
+ case pci_channel_io_perm_failure:
+ /* Permanent failure, prepare for device down */
+ lpfc_prep_dev_for_perm_failure(phba);
return PCI_ERS_RESULT_DISCONNECT;
+ default:
+ /* Unknown state, prepare and request slot reset */
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0472 Unknown PCI error state: x%x\n", state);
+ lpfc_sli_prep_dev_for_reset(phba);
+ return PCI_ERS_RESULT_NEED_RESET;
}
-
- pci_disable_device(pdev);
- /*
- * There may be I/Os dropped by the firmware.
- * Error iocb (I/O) on txcmplq and let the SCSI layer
- * retry it after re-establishing link.
- */
- pring = &psli->ring[psli->fcp_ring];
- lpfc_sli_abort_iocb_ring(phba, pring);
-
- /* Disable interrupt */
- lpfc_sli_disable_intr(phba);
-
- /* Request a slot reset. */
- return PCI_ERS_RESULT_NEED_RESET;
}
/**
@@ -7197,7 +7347,12 @@
struct Scsi_Host *shost = pci_get_drvdata(pdev);
struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
+ /* Bring the device online */
lpfc_online(phba);
+
+ /* Clean up Advanced Error Reporting (AER) if needed */
+ if (phba->hba_flag & HBA_AER_ENABLED)
+ pci_cleanup_aer_uncorrect_error_status(pdev);
}
/**
@@ -7213,15 +7368,15 @@
if (phba->sli_rev == LPFC_SLI_REV4) {
if (max_xri <= 100)
- return 4;
+ return 10;
else if (max_xri <= 256)
- return 8;
+ return 25;
else if (max_xri <= 512)
- return 16;
+ return 50;
else if (max_xri <= 1024)
- return 32;
+ return 100;
else
- return 48;
+ return 150;
} else
return 0;
}
@@ -7249,6 +7404,7 @@
{
struct lpfc_hba *phba;
struct lpfc_vport *vport = NULL;
+ struct Scsi_Host *shost = NULL;
int error;
uint32_t cfg_mode, intr_mode;
int mcnt;
@@ -7329,6 +7485,7 @@
goto out_destroy_shost;
}
+ shost = lpfc_shost_from_vport(vport); /* save shost for error cleanup */
/* Now, trying to enable interrupt and bring up the device */
cfg_mode = phba->cfg_use_msi;
while (true) {
@@ -7397,6 +7554,8 @@
lpfc_sli4_pci_mem_unset(phba);
out_disable_pci_dev:
lpfc_disable_pci_dev(phba);
+ if (shost)
+ scsi_host_put(shost);
out_free_phba:
lpfc_hba_free(phba);
return error;
@@ -7971,6 +8130,10 @@
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_SERVERENGINE, PCI_DEVICE_ID_TIGERSHARK,
PCI_ANY_ID, PCI_ANY_ID, },
+ {PCI_VENDOR_ID_SERVERENGINE, PCI_DEVICE_ID_TOMCAT,
+ PCI_ANY_ID, PCI_ANY_ID, },
+ {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_FALCON,
+ PCI_ANY_ID, PCI_ANY_ID, },
{ 0 }
};
@@ -8053,15 +8216,15 @@
if (lpfc_enable_npiv)
fc_release_transport(lpfc_vport_transport_template);
if (_dump_buf_data) {
- printk(KERN_ERR "BLKGRD freeing %lu pages for _dump_buf_data "
- "at 0x%p\n",
+ printk(KERN_ERR "9062 BLKGRD: freeing %lu pages for "
+ "_dump_buf_data at 0x%p\n",
(1L << _dump_buf_data_order), _dump_buf_data);
free_pages((unsigned long)_dump_buf_data, _dump_buf_data_order);
}
if (_dump_buf_dif) {
- printk(KERN_ERR "BLKGRD freeing %lu pages for _dump_buf_dif "
- "at 0x%p\n",
+ printk(KERN_ERR "9049 BLKGRD: freeing %lu pages for "
+ "_dump_buf_dif at 0x%p\n",
(1L << _dump_buf_dif_order), _dump_buf_dif);
free_pages((unsigned long)_dump_buf_dif, _dump_buf_dif_order);
}
diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c
index 1ab4059..a9afd8b 100644
--- a/drivers/scsi/lpfc/lpfc_mbox.c
+++ b/drivers/scsi/lpfc/lpfc_mbox.c
@@ -25,8 +25,8 @@
#include <scsi/scsi_device.h>
#include <scsi/scsi_transport_fc.h>
-
#include <scsi/scsi.h>
+#include <scsi/fc/fc_fs.h>
#include "lpfc_hw4.h"
#include "lpfc_hw.h"
@@ -820,6 +820,10 @@
mb->un.varRegVpi.vpi = vport->vpi + vport->phba->vpi_base;
mb->un.varRegVpi.sid = vport->fc_myDID;
mb->un.varRegVpi.vfi = vport->vfi + vport->phba->vfi_base;
+ memcpy(mb->un.varRegVpi.wwn, &vport->fc_portname,
+ sizeof(struct lpfc_name));
+ mb->un.varRegVpi.wwn[0] = cpu_to_le32(mb->un.varRegVpi.wwn[0]);
+ mb->un.varRegVpi.wwn[1] = cpu_to_le32(mb->un.varRegVpi.wwn[1]);
mb->mbxCommand = MBX_REG_VPI;
mb->mbxOwner = OWN_HOST;
@@ -849,7 +853,10 @@
MAILBOX_t *mb = &pmb->u.mb;
memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
- mb->un.varUnregVpi.vpi = vpi + phba->vpi_base;
+ if (phba->sli_rev < LPFC_SLI_REV4)
+ mb->un.varUnregVpi.vpi = vpi + phba->vpi_base;
+ else
+ mb->un.varUnregVpi.sli4_vpi = vpi + phba->vpi_base;
mb->mbxCommand = MBX_UNREG_VPI;
mb->mbxOwner = OWN_HOST;
@@ -1132,7 +1139,7 @@
/* Otherwise we setup specific rctl / type masks for this ring */
for (i = 0; i < pring->num_mask; i++) {
mb->un.varCfgRing.rrRegs[i].rval = pring->prt[i].rctl;
- if (mb->un.varCfgRing.rrRegs[i].rval != FC_ELS_REQ)
+ if (mb->un.varCfgRing.rrRegs[i].rval != FC_RCTL_ELS_REQ)
mb->un.varCfgRing.rrRegs[i].rmask = 0xff;
else
mb->un.varCfgRing.rrRegs[i].rmask = 0xfe;
@@ -1654,9 +1661,12 @@
/* Allocate record for keeping SGE virtual addresses */
mbox->sge_array = kmalloc(sizeof(struct lpfc_mbx_nembed_sge_virt),
GFP_KERNEL);
- if (!mbox->sge_array)
+ if (!mbox->sge_array) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX,
+ "2527 Failed to allocate non-embedded SGE "
+ "array.\n");
return 0;
-
+ }
for (pagen = 0, alloc_len = 0; pagen < pcount; pagen++) {
/* The DMA memory is always allocated in the length of a
* page even though the last SGE might not fill up to a
@@ -1753,11 +1763,6 @@
/* Set up host requested features. */
bf_set(lpfc_mbx_rq_ftr_rq_fcpi, &mboxq->u.mqe.un.req_ftrs, 1);
- if (phba->cfg_enable_fip)
- bf_set(lpfc_mbx_rq_ftr_rq_ifip, &mboxq->u.mqe.un.req_ftrs, 0);
- else
- bf_set(lpfc_mbx_rq_ftr_rq_ifip, &mboxq->u.mqe.un.req_ftrs, 1);
-
/* Enable DIF (block guard) only if configured to do so. */
if (phba->cfg_enable_bg)
bf_set(lpfc_mbx_rq_ftr_rq_dif, &mboxq->u.mqe.un.req_ftrs, 1);
@@ -1817,6 +1822,9 @@
bf_set(lpfc_reg_vfi_vfi, reg_vfi, vport->vfi + vport->phba->vfi_base);
bf_set(lpfc_reg_vfi_fcfi, reg_vfi, vport->phba->fcf.fcfi);
bf_set(lpfc_reg_vfi_vpi, reg_vfi, vport->vpi + vport->phba->vpi_base);
+ memcpy(reg_vfi->wwn, &vport->fc_portname, sizeof(struct lpfc_name));
+ reg_vfi->wwn[0] = cpu_to_le32(reg_vfi->wwn[0]);
+ reg_vfi->wwn[1] = cpu_to_le32(reg_vfi->wwn[1]);
reg_vfi->bde.addrHigh = putPaddrHigh(phys);
reg_vfi->bde.addrLow = putPaddrLow(phys);
reg_vfi->bde.tus.f.bdeSize = sizeof(vport->fc_sparam);
@@ -1850,7 +1858,7 @@
/**
* lpfc_unreg_vfi - Initialize the UNREG_VFI mailbox command
* @mbox: pointer to lpfc mbox command to initialize.
- * @vfi: VFI to be unregistered.
+ * @vport: vport associated with the VF.
*
* The UNREG_VFI mailbox command causes the SLI Host to put a virtual fabric
* (logical NPort) into the inactive state. The SLI Host must have logged out
@@ -1859,11 +1867,12 @@
* fabric inactive.
**/
void
-lpfc_unreg_vfi(struct lpfcMboxq *mbox, uint16_t vfi)
+lpfc_unreg_vfi(struct lpfcMboxq *mbox, struct lpfc_vport *vport)
{
memset(mbox, 0, sizeof(*mbox));
bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_UNREG_VFI);
- bf_set(lpfc_unreg_vfi_vfi, &mbox->u.mqe.un.unreg_vfi, vfi);
+ bf_set(lpfc_unreg_vfi_vfi, &mbox->u.mqe.un.unreg_vfi,
+ vport->vfi + vport->phba->vfi_base);
}
/**
diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c
index 3e74136..2ed6af1 100644
--- a/drivers/scsi/lpfc/lpfc_nportdisc.c
+++ b/drivers/scsi/lpfc/lpfc_nportdisc.c
@@ -1223,6 +1223,12 @@
list_for_each_entry_safe(mb, nextmb, &phba->sli.mboxq, list) {
if ((mb->u.mb.mbxCommand == MBX_REG_LOGIN64) &&
(ndlp == (struct lpfc_nodelist *) mb->context2)) {
+ if (phba->sli_rev == LPFC_SLI_REV4) {
+ spin_unlock_irq(&phba->hbalock);
+ lpfc_sli4_free_rpi(phba,
+ mb->u.mb.un.varRegLogin.rpi);
+ spin_lock_irq(&phba->hbalock);
+ }
mp = (struct lpfc_dmabuf *) (mb->context1);
if (mp) {
__lpfc_mbuf_free(phba, mp->virt, mp->phys);
@@ -1230,6 +1236,7 @@
}
lpfc_nlp_put(ndlp);
list_del(&mb->list);
+ phba->sli.mboxq_cnt--;
mempool_free(mb, phba->mbox_mem_pool);
}
}
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index c88f59f..a246410 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -59,22 +59,26 @@
};
static void
lpfc_release_scsi_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb);
+static void
+lpfc_release_scsi_buf_s3(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb);
static void
-lpfc_debug_save_data(struct scsi_cmnd *cmnd)
+lpfc_debug_save_data(struct lpfc_hba *phba, struct scsi_cmnd *cmnd)
{
void *src, *dst;
struct scatterlist *sgde = scsi_sglist(cmnd);
if (!_dump_buf_data) {
- printk(KERN_ERR "BLKGRD ERROR %s _dump_buf_data is NULL\n",
+ lpfc_printf_log(phba, KERN_ERR, LOG_BG,
+ "9050 BLKGRD: ERROR %s _dump_buf_data is NULL\n",
__func__);
return;
}
if (!sgde) {
- printk(KERN_ERR "BLKGRD ERROR: data scatterlist is null\n");
+ lpfc_printf_log(phba, KERN_ERR, LOG_BG,
+ "9051 BLKGRD: ERROR: data scatterlist is null\n");
return;
}
@@ -88,19 +92,21 @@
}
static void
-lpfc_debug_save_dif(struct scsi_cmnd *cmnd)
+lpfc_debug_save_dif(struct lpfc_hba *phba, struct scsi_cmnd *cmnd)
{
void *src, *dst;
struct scatterlist *sgde = scsi_prot_sglist(cmnd);
if (!_dump_buf_dif) {
- printk(KERN_ERR "BLKGRD ERROR %s _dump_buf_data is NULL\n",
+ lpfc_printf_log(phba, KERN_ERR, LOG_BG,
+ "9052 BLKGRD: ERROR %s _dump_buf_data is NULL\n",
__func__);
return;
}
if (!sgde) {
- printk(KERN_ERR "BLKGRD ERROR: prot scatterlist is null\n");
+ lpfc_printf_log(phba, KERN_ERR, LOG_BG,
+ "9053 BLKGRD: ERROR: prot scatterlist is null\n");
return;
}
@@ -242,6 +248,36 @@
}
/**
+ * lpfc_change_queue_depth - Alter scsi device queue depth
+ * @sdev: Pointer the scsi device on which to change the queue depth.
+ * @qdepth: New queue depth to set the sdev to.
+ * @reason: The reason for the queue depth change.
+ *
+ * This function is called by the midlayer and the LLD to alter the queue
+ * depth for a scsi device. This function sets the queue depth to the new
+ * value and sends an event out to log the queue depth change.
+ **/
+int
+lpfc_change_queue_depth(struct scsi_device *sdev, int qdepth, int reason)
+{
+ struct lpfc_vport *vport = (struct lpfc_vport *) sdev->host->hostdata;
+ struct lpfc_hba *phba = vport->phba;
+ struct lpfc_rport_data *rdata;
+ unsigned long new_queue_depth, old_queue_depth;
+
+ old_queue_depth = sdev->queue_depth;
+ scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), qdepth);
+ new_queue_depth = sdev->queue_depth;
+ rdata = sdev->hostdata;
+ if (rdata)
+ lpfc_send_sdev_queuedepth_change_event(phba, vport,
+ rdata->pnode, sdev->lun,
+ old_queue_depth,
+ new_queue_depth);
+ return sdev->queue_depth;
+}
+
+/**
* lpfc_rampdown_queue_depth - Post RAMP_DOWN_QUEUE event to worker thread
* @phba: The Hba for which this call is being executed.
*
@@ -305,8 +341,10 @@
if (vport->cfg_lun_queue_depth <= queue_depth)
return;
spin_lock_irqsave(&phba->hbalock, flags);
- if (((phba->last_ramp_up_time + QUEUE_RAMP_UP_INTERVAL) > jiffies) ||
- ((phba->last_rsrc_error_time + QUEUE_RAMP_UP_INTERVAL ) > jiffies)) {
+ if (time_before(jiffies,
+ phba->last_ramp_up_time + QUEUE_RAMP_UP_INTERVAL) ||
+ time_before(jiffies,
+ phba->last_rsrc_error_time + QUEUE_RAMP_UP_INTERVAL)) {
spin_unlock_irqrestore(&phba->hbalock, flags);
return;
}
@@ -338,10 +376,9 @@
struct lpfc_vport **vports;
struct Scsi_Host *shost;
struct scsi_device *sdev;
- unsigned long new_queue_depth, old_queue_depth;
+ unsigned long new_queue_depth;
unsigned long num_rsrc_err, num_cmd_success;
int i;
- struct lpfc_rport_data *rdata;
num_rsrc_err = atomic_read(&phba->num_rsrc_err);
num_cmd_success = atomic_read(&phba->num_cmd_success);
@@ -359,22 +396,8 @@
else
new_queue_depth = sdev->queue_depth -
new_queue_depth;
- old_queue_depth = sdev->queue_depth;
- if (sdev->ordered_tags)
- scsi_adjust_queue_depth(sdev,
- MSG_ORDERED_TAG,
- new_queue_depth);
- else
- scsi_adjust_queue_depth(sdev,
- MSG_SIMPLE_TAG,
- new_queue_depth);
- rdata = sdev->hostdata;
- if (rdata)
- lpfc_send_sdev_queuedepth_change_event(
- phba, vports[i],
- rdata->pnode,
- sdev->lun, old_queue_depth,
- new_queue_depth);
+ lpfc_change_queue_depth(sdev, new_queue_depth,
+ SCSI_QDEPTH_DEFAULT);
}
}
lpfc_destroy_vport_work_array(phba, vports);
@@ -398,7 +421,6 @@
struct Scsi_Host *shost;
struct scsi_device *sdev;
int i;
- struct lpfc_rport_data *rdata;
vports = lpfc_create_vport_work_array(phba);
if (vports != NULL)
@@ -408,22 +430,9 @@
if (vports[i]->cfg_lun_queue_depth <=
sdev->queue_depth)
continue;
- if (sdev->ordered_tags)
- scsi_adjust_queue_depth(sdev,
- MSG_ORDERED_TAG,
- sdev->queue_depth+1);
- else
- scsi_adjust_queue_depth(sdev,
- MSG_SIMPLE_TAG,
- sdev->queue_depth+1);
- rdata = sdev->hostdata;
- if (rdata)
- lpfc_send_sdev_queuedepth_change_event(
- phba, vports[i],
- rdata->pnode,
- sdev->lun,
- sdev->queue_depth - 1,
- sdev->queue_depth);
+ lpfc_change_queue_depth(sdev,
+ sdev->queue_depth+1,
+ SCSI_QDEPTH_RAMP_UP);
}
}
lpfc_destroy_vport_work_array(phba, vports);
@@ -589,7 +598,7 @@
iocb->ulpClass = CLASS3;
psb->status = IOSTAT_SUCCESS;
/* Put it back into the SCSI buffer list */
- lpfc_release_scsi_buf_s4(phba, psb);
+ lpfc_release_scsi_buf_s3(phba, psb);
}
@@ -1024,7 +1033,8 @@
lpfc_cmd->seg_cnt = nseg;
if (lpfc_cmd->seg_cnt > phba->cfg_sg_seg_cnt) {
- printk(KERN_ERR "%s: Too many sg segments from "
+ lpfc_printf_log(phba, KERN_ERR, LOG_BG,
+ "9064 BLKGRD: %s: Too many sg segments from "
"dma_map_sg. Config %d, seg_cnt %d\n",
__func__, phba->cfg_sg_seg_cnt,
lpfc_cmd->seg_cnt);
@@ -1112,7 +1122,7 @@
* with the cmd
*/
static int
-lpfc_sc_to_sli_prof(struct scsi_cmnd *sc)
+lpfc_sc_to_sli_prof(struct lpfc_hba *phba, struct scsi_cmnd *sc)
{
uint8_t guard_type = scsi_host_get_guard(sc->device->host);
uint8_t ret_prof = LPFC_PROF_INVALID;
@@ -1136,7 +1146,8 @@
case SCSI_PROT_NORMAL:
default:
- printk(KERN_ERR "Bad op/guard:%d/%d combination\n",
+ lpfc_printf_log(phba, KERN_ERR, LOG_BG,
+ "9063 BLKGRD:Bad op/guard:%d/%d combination\n",
scsi_get_prot_op(sc), guard_type);
break;
@@ -1157,7 +1168,8 @@
case SCSI_PROT_WRITE_STRIP:
case SCSI_PROT_NORMAL:
default:
- printk(KERN_ERR "Bad op/guard:%d/%d combination\n",
+ lpfc_printf_log(phba, KERN_ERR, LOG_BG,
+ "9075 BLKGRD: Bad op/guard:%d/%d combination\n",
scsi_get_prot_op(sc), guard_type);
break;
}
@@ -1259,7 +1271,7 @@
uint16_t apptagmask, apptagval;
pde1 = (struct lpfc_pde *) bpl;
- prof = lpfc_sc_to_sli_prof(sc);
+ prof = lpfc_sc_to_sli_prof(phba, sc);
if (prof == LPFC_PROF_INVALID)
goto out;
@@ -1359,7 +1371,7 @@
return 0;
}
- prof = lpfc_sc_to_sli_prof(sc);
+ prof = lpfc_sc_to_sli_prof(phba, sc);
if (prof == LPFC_PROF_INVALID)
goto out;
@@ -1408,7 +1420,8 @@
subtotal = 0; /* total bytes processed for current prot grp */
while (!pgdone) {
if (!sgde) {
- printk(KERN_ERR "%s Invalid data segment\n",
+ lpfc_printf_log(phba, KERN_ERR, LOG_BG,
+ "9065 BLKGRD:%s Invalid data segment\n",
__func__);
return 0;
}
@@ -1462,7 +1475,8 @@
reftag += protgrp_blks;
} else {
/* if we're here, we have a bug */
- printk(KERN_ERR "BLKGRD: bug in %s\n", __func__);
+ lpfc_printf_log(phba, KERN_ERR, LOG_BG,
+ "9054 BLKGRD: bug in %s\n", __func__);
}
} while (!alldone);
@@ -1544,8 +1558,10 @@
lpfc_cmd->seg_cnt = datasegcnt;
if (lpfc_cmd->seg_cnt > phba->cfg_sg_seg_cnt) {
- printk(KERN_ERR "%s: Too many sg segments from "
- "dma_map_sg. Config %d, seg_cnt %d\n",
+ lpfc_printf_log(phba, KERN_ERR, LOG_BG,
+ "9067 BLKGRD: %s: Too many sg segments"
+ " from dma_map_sg. Config %d, seg_cnt"
+ " %d\n",
__func__, phba->cfg_sg_seg_cnt,
lpfc_cmd->seg_cnt);
scsi_dma_unmap(scsi_cmnd);
@@ -1579,8 +1595,9 @@
lpfc_cmd->prot_seg_cnt = protsegcnt;
if (lpfc_cmd->prot_seg_cnt
> phba->cfg_prot_sg_seg_cnt) {
- printk(KERN_ERR "%s: Too many prot sg segments "
- "from dma_map_sg. Config %d,"
+ lpfc_printf_log(phba, KERN_ERR, LOG_BG,
+ "9068 BLKGRD: %s: Too many prot sg "
+ "segments from dma_map_sg. Config %d,"
"prot_seg_cnt %d\n", __func__,
phba->cfg_prot_sg_seg_cnt,
lpfc_cmd->prot_seg_cnt);
@@ -1671,23 +1688,26 @@
uint32_t bgstat = bgf->bgstat;
uint64_t failing_sector = 0;
- printk(KERN_ERR "BG ERROR in cmd 0x%x lba 0x%llx blk cnt 0x%x "
+ lpfc_printf_log(phba, KERN_ERR, LOG_BG, "9069 BLKGRD: BG ERROR in cmd"
+ " 0x%x lba 0x%llx blk cnt 0x%x "
"bgstat=0x%x bghm=0x%x\n",
cmd->cmnd[0], (unsigned long long)scsi_get_lba(cmd),
blk_rq_sectors(cmd->request), bgstat, bghm);
spin_lock(&_dump_buf_lock);
if (!_dump_buf_done) {
- printk(KERN_ERR "Saving Data for %u blocks to debugfs\n",
+ lpfc_printf_log(phba, KERN_ERR, LOG_BG, "9070 BLKGRD: Saving"
+ " Data for %u blocks to debugfs\n",
(cmd->cmnd[7] << 8 | cmd->cmnd[8]));
- lpfc_debug_save_data(cmd);
+ lpfc_debug_save_data(phba, cmd);
/* If we have a prot sgl, save the DIF buffer */
if (lpfc_prot_group_type(phba, cmd) ==
LPFC_PG_TYPE_DIF_BUF) {
- printk(KERN_ERR "Saving DIF for %u blocks to debugfs\n",
- (cmd->cmnd[7] << 8 | cmd->cmnd[8]));
- lpfc_debug_save_dif(cmd);
+ lpfc_printf_log(phba, KERN_ERR, LOG_BG, "9071 BLKGRD: "
+ "Saving DIF for %u blocks to debugfs\n",
+ (cmd->cmnd[7] << 8 | cmd->cmnd[8]));
+ lpfc_debug_save_dif(phba, cmd);
}
_dump_buf_done = 1;
@@ -1696,15 +1716,17 @@
if (lpfc_bgs_get_invalid_prof(bgstat)) {
cmd->result = ScsiResult(DID_ERROR, 0);
- printk(KERN_ERR "Invalid BlockGuard profile. bgstat:0x%x\n",
- bgstat);
+ lpfc_printf_log(phba, KERN_ERR, LOG_BG, "9072 BLKGRD: Invalid"
+ " BlockGuard profile. bgstat:0x%x\n",
+ bgstat);
ret = (-1);
goto out;
}
if (lpfc_bgs_get_uninit_dif_block(bgstat)) {
cmd->result = ScsiResult(DID_ERROR, 0);
- printk(KERN_ERR "Invalid BlockGuard DIF Block. bgstat:0x%x\n",
+ lpfc_printf_log(phba, KERN_ERR, LOG_BG, "9073 BLKGRD: "
+ "Invalid BlockGuard DIF Block. bgstat:0x%x\n",
bgstat);
ret = (-1);
goto out;
@@ -1718,7 +1740,8 @@
cmd->result = DRIVER_SENSE << 24
| ScsiResult(DID_ABORT, SAM_STAT_CHECK_CONDITION);
phba->bg_guard_err_cnt++;
- printk(KERN_ERR "BLKGRD: guard_tag error\n");
+ lpfc_printf_log(phba, KERN_ERR, LOG_BG,
+ "9055 BLKGRD: guard_tag error\n");
}
if (lpfc_bgs_get_reftag_err(bgstat)) {
@@ -1730,7 +1753,8 @@
| ScsiResult(DID_ABORT, SAM_STAT_CHECK_CONDITION);
phba->bg_reftag_err_cnt++;
- printk(KERN_ERR "BLKGRD: ref_tag error\n");
+ lpfc_printf_log(phba, KERN_ERR, LOG_BG,
+ "9056 BLKGRD: ref_tag error\n");
}
if (lpfc_bgs_get_apptag_err(bgstat)) {
@@ -1742,7 +1766,8 @@
| ScsiResult(DID_ABORT, SAM_STAT_CHECK_CONDITION);
phba->bg_apptag_err_cnt++;
- printk(KERN_ERR "BLKGRD: app_tag error\n");
+ lpfc_printf_log(phba, KERN_ERR, LOG_BG,
+ "9061 BLKGRD: app_tag error\n");
}
if (lpfc_bgs_get_hi_water_mark_present(bgstat)) {
@@ -1763,7 +1788,8 @@
if (!ret) {
/* No error was reported - problem in FW? */
cmd->result = ScsiResult(DID_ERROR, 0);
- printk(KERN_ERR "BLKGRD: no errors reported!\n");
+ lpfc_printf_log(phba, KERN_ERR, LOG_BG,
+ "9057 BLKGRD: no errors reported!\n");
}
out:
@@ -1822,9 +1848,10 @@
lpfc_cmd->seg_cnt = nseg;
if (lpfc_cmd->seg_cnt > phba->cfg_sg_seg_cnt) {
- printk(KERN_ERR "%s: Too many sg segments from "
- "dma_map_sg. Config %d, seg_cnt %d\n",
- __func__, phba->cfg_sg_seg_cnt,
+ lpfc_printf_log(phba, KERN_ERR, LOG_BG, "9074 BLKGRD:"
+ " %s: Too many sg segments from "
+ "dma_map_sg. Config %d, seg_cnt %d\n",
+ __func__, phba->cfg_sg_seg_cnt,
lpfc_cmd->seg_cnt);
scsi_dma_unmap(scsi_cmnd);
return 1;
@@ -2050,6 +2077,21 @@
goto out;
}
+ if (resp_info & RSP_LEN_VALID) {
+ rsplen = be32_to_cpu(fcprsp->rspRspLen);
+ if ((rsplen != 0 && rsplen != 4 && rsplen != 8) ||
+ (fcprsp->rspInfo3 != RSP_NO_FAILURE)) {
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
+ "2719 Invalid response length: "
+ "tgt x%x lun x%x cmnd x%x rsplen x%x\n",
+ cmnd->device->id,
+ cmnd->device->lun, cmnd->cmnd[0],
+ rsplen);
+ host_status = DID_ERROR;
+ goto out;
+ }
+ }
+
if ((resp_info & SNS_LEN_VALID) && fcprsp->rspSnsLen) {
uint32_t snslen = be32_to_cpu(fcprsp->rspSnsLen);
if (snslen > SCSI_SENSE_BUFFERSIZE)
@@ -2074,15 +2116,6 @@
be32_to_cpu(fcprsp->rspRspLen),
fcprsp->rspInfo3);
- if (resp_info & RSP_LEN_VALID) {
- rsplen = be32_to_cpu(fcprsp->rspRspLen);
- if ((rsplen != 0 && rsplen != 4 && rsplen != 8) ||
- (fcprsp->rspInfo3 != RSP_NO_FAILURE)) {
- host_status = DID_ERROR;
- goto out;
- }
- }
-
scsi_set_resid(cmnd, 0);
if (resp_info & RESID_UNDER) {
scsi_set_resid(cmnd, be32_to_cpu(fcprsp->rspResId));
@@ -2180,7 +2213,7 @@
struct scsi_cmnd *cmd = lpfc_cmd->pCmd;
int result;
struct scsi_device *tmp_sdev;
- int depth = 0;
+ int depth;
unsigned long flags;
struct lpfc_fast_path_event *fast_path_evt;
struct Scsi_Host *shost = cmd->device->host;
@@ -2264,7 +2297,7 @@
lpfc_printf_vlog(vport, KERN_WARNING,
LOG_BG,
"9031 non-zero BGSTAT "
- "on unprotected cmd");
+ "on unprotected cmd\n");
}
}
@@ -2347,67 +2380,29 @@
return;
}
-
if (!result)
lpfc_rampup_queue_depth(vport, queue_depth);
- if (!result && pnode && NLP_CHK_NODE_ACT(pnode) &&
- ((jiffies - pnode->last_ramp_up_time) >
- LPFC_Q_RAMP_UP_INTERVAL * HZ) &&
- ((jiffies - pnode->last_q_full_time) >
- LPFC_Q_RAMP_UP_INTERVAL * HZ) &&
- (vport->cfg_lun_queue_depth > queue_depth)) {
- shost_for_each_device(tmp_sdev, shost) {
- if (vport->cfg_lun_queue_depth > tmp_sdev->queue_depth){
- if (tmp_sdev->id != scsi_id)
- continue;
- if (tmp_sdev->ordered_tags)
- scsi_adjust_queue_depth(tmp_sdev,
- MSG_ORDERED_TAG,
- tmp_sdev->queue_depth+1);
- else
- scsi_adjust_queue_depth(tmp_sdev,
- MSG_SIMPLE_TAG,
- tmp_sdev->queue_depth+1);
-
- pnode->last_ramp_up_time = jiffies;
- }
- }
- lpfc_send_sdev_queuedepth_change_event(phba, vport, pnode,
- 0xFFFFFFFF,
- queue_depth , queue_depth + 1);
- }
-
/*
* Check for queue full. If the lun is reporting queue full, then
* back off the lun queue depth to prevent target overloads.
*/
if (result == SAM_STAT_TASK_SET_FULL && pnode &&
NLP_CHK_NODE_ACT(pnode)) {
- pnode->last_q_full_time = jiffies;
-
shost_for_each_device(tmp_sdev, shost) {
if (tmp_sdev->id != scsi_id)
continue;
depth = scsi_track_queue_full(tmp_sdev,
- tmp_sdev->queue_depth - 1);
- }
- /*
- * The queue depth cannot be lowered any more.
- * Modify the returned error code to store
- * the final depth value set by
- * scsi_track_queue_full.
- */
- if (depth == -1)
- depth = shost->cmd_per_lun;
-
- if (depth) {
+ tmp_sdev->queue_depth-1);
+ if (depth <= 0)
+ continue;
lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP,
"0711 detected queue full - lun queue "
"depth adjusted to %d.\n", depth);
lpfc_send_sdev_queuedepth_change_event(phba, vport,
- pnode, 0xFFFFFFFF,
- depth+1, depth);
+ pnode,
+ tmp_sdev->lun,
+ depth+1, depth);
}
}
@@ -2745,7 +2740,9 @@
struct lpfc_hba *phba = (struct lpfc_hba *) ptr;
if (phba->cfg_poll & ENABLE_FCP_RING_POLLING) {
- lpfc_sli_poll_fcp_ring (phba);
+ lpfc_sli_handle_fast_ring_event(phba,
+ &phba->sli.ring[LPFC_FCP_RING], HA_R0RE_REQ);
+
if (phba->cfg_poll & DISABLE_FCP_RING_INT)
lpfc_poll_rearm_timer(phba);
}
@@ -2771,7 +2768,7 @@
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
struct lpfc_hba *phba = vport->phba;
struct lpfc_rport_data *rdata = cmnd->device->hostdata;
- struct lpfc_nodelist *ndlp = rdata->pnode;
+ struct lpfc_nodelist *ndlp;
struct lpfc_scsi_buf *lpfc_cmd;
struct fc_rport *rport = starget_to_rport(scsi_target(cmnd->device));
int err;
@@ -2781,13 +2778,15 @@
cmnd->result = err;
goto out_fail_command;
}
+ ndlp = rdata->pnode;
if (!(phba->sli3_options & LPFC_SLI3_BG_ENABLED) &&
scsi_get_prot_op(cmnd) != SCSI_PROT_NORMAL) {
- printk(KERN_ERR "BLKGRD ERROR: rcvd protected cmd:%02x op:%02x "
- "str=%s without registering for BlockGuard - "
- "Rejecting command\n",
+ lpfc_printf_log(phba, KERN_ERR, LOG_BG,
+ "9058 BLKGRD: ERROR: rcvd protected cmd:%02x"
+ " op:%02x str=%s without registering for"
+ " BlockGuard - Rejecting command\n",
cmnd->cmnd[0], scsi_get_prot_op(cmnd),
dif_op_str[scsi_get_prot_op(cmnd)]);
goto out_fail_command;
@@ -2827,61 +2826,66 @@
cmnd->scsi_done = done;
if (scsi_get_prot_op(cmnd) != SCSI_PROT_NORMAL) {
- lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG,
+ if (vport->phba->cfg_enable_bg) {
+ lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG,
"9033 BLKGRD: rcvd protected cmd:%02x op:%02x "
"str=%s\n",
cmnd->cmnd[0], scsi_get_prot_op(cmnd),
dif_op_str[scsi_get_prot_op(cmnd)]);
- lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG,
+ lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG,
"9034 BLKGRD: CDB: %02x %02x %02x %02x %02x "
"%02x %02x %02x %02x %02x\n",
cmnd->cmnd[0], cmnd->cmnd[1], cmnd->cmnd[2],
cmnd->cmnd[3], cmnd->cmnd[4], cmnd->cmnd[5],
cmnd->cmnd[6], cmnd->cmnd[7], cmnd->cmnd[8],
cmnd->cmnd[9]);
- if (cmnd->cmnd[0] == READ_10)
- lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG,
+ if (cmnd->cmnd[0] == READ_10)
+ lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG,
"9035 BLKGRD: READ @ sector %llu, "
"count %u\n",
(unsigned long long)scsi_get_lba(cmnd),
blk_rq_sectors(cmnd->request));
- else if (cmnd->cmnd[0] == WRITE_10)
- lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG,
+ else if (cmnd->cmnd[0] == WRITE_10)
+ lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG,
"9036 BLKGRD: WRITE @ sector %llu, "
"count %u cmd=%p\n",
(unsigned long long)scsi_get_lba(cmnd),
blk_rq_sectors(cmnd->request),
cmnd);
+ }
err = lpfc_bg_scsi_prep_dma_buf(phba, lpfc_cmd);
} else {
- lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG,
- "9038 BLKGRD: rcvd unprotected cmd:%02x op:%02x"
- " str=%s\n",
- cmnd->cmnd[0], scsi_get_prot_op(cmnd),
- dif_op_str[scsi_get_prot_op(cmnd)]);
- lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG,
- "9039 BLKGRD: CDB: %02x %02x %02x %02x %02x "
- "%02x %02x %02x %02x %02x\n",
- cmnd->cmnd[0], cmnd->cmnd[1], cmnd->cmnd[2],
- cmnd->cmnd[3], cmnd->cmnd[4], cmnd->cmnd[5],
- cmnd->cmnd[6], cmnd->cmnd[7], cmnd->cmnd[8],
- cmnd->cmnd[9]);
- if (cmnd->cmnd[0] == READ_10)
+ if (vport->phba->cfg_enable_bg) {
lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG,
- "9040 dbg: READ @ sector %llu, "
- "count %u\n",
- (unsigned long long)scsi_get_lba(cmnd),
+ "9038 BLKGRD: rcvd unprotected cmd:"
+ "%02x op:%02x str=%s\n",
+ cmnd->cmnd[0], scsi_get_prot_op(cmnd),
+ dif_op_str[scsi_get_prot_op(cmnd)]);
+ lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG,
+ "9039 BLKGRD: CDB: %02x %02x %02x "
+ "%02x %02x %02x %02x %02x %02x %02x\n",
+ cmnd->cmnd[0], cmnd->cmnd[1],
+ cmnd->cmnd[2], cmnd->cmnd[3],
+ cmnd->cmnd[4], cmnd->cmnd[5],
+ cmnd->cmnd[6], cmnd->cmnd[7],
+ cmnd->cmnd[8], cmnd->cmnd[9]);
+ if (cmnd->cmnd[0] == READ_10)
+ lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG,
+ "9040 dbg: READ @ sector %llu, "
+ "count %u\n",
+ (unsigned long long)scsi_get_lba(cmnd),
blk_rq_sectors(cmnd->request));
- else if (cmnd->cmnd[0] == WRITE_10)
- lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG,
+ else if (cmnd->cmnd[0] == WRITE_10)
+ lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG,
"9041 dbg: WRITE @ sector %llu, "
"count %u cmd=%p\n",
(unsigned long long)scsi_get_lba(cmnd),
blk_rq_sectors(cmnd->request), cmnd);
- else
- lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG,
+ else
+ lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG,
"9042 dbg: parser not implemented\n");
+ }
err = lpfc_scsi_prep_dma_buf(phba, lpfc_cmd);
}
@@ -2898,7 +2902,11 @@
goto out_host_busy_free_buf;
}
if (phba->cfg_poll & ENABLE_FCP_RING_POLLING) {
- lpfc_sli_poll_fcp_ring(phba);
+ spin_unlock(shost->host_lock);
+ lpfc_sli_handle_fast_ring_event(phba,
+ &phba->sli.ring[LPFC_FCP_RING], HA_R0RE_REQ);
+
+ spin_lock(shost->host_lock);
if (phba->cfg_poll & DISABLE_FCP_RING_INT)
lpfc_poll_rearm_timer(phba);
}
@@ -2917,28 +2925,6 @@
}
/**
- * lpfc_block_error_handler - Routine to block error handler
- * @cmnd: Pointer to scsi_cmnd data structure.
- *
- * This routine blocks execution till fc_rport state is not FC_PORSTAT_BLCOEKD.
- **/
-static void
-lpfc_block_error_handler(struct scsi_cmnd *cmnd)
-{
- struct Scsi_Host *shost = cmnd->device->host;
- struct fc_rport *rport = starget_to_rport(scsi_target(cmnd->device));
-
- spin_lock_irq(shost->host_lock);
- while (rport->port_state == FC_PORTSTATE_BLOCKED) {
- spin_unlock_irq(shost->host_lock);
- msleep(1000);
- spin_lock_irq(shost->host_lock);
- }
- spin_unlock_irq(shost->host_lock);
- return;
-}
-
-/**
* lpfc_abort_handler - scsi_host_template eh_abort_handler entry point
* @cmnd: Pointer to scsi_cmnd data structure.
*
@@ -2961,7 +2947,7 @@
int ret = SUCCESS;
DECLARE_WAIT_QUEUE_HEAD_ONSTACK(waitq);
- lpfc_block_error_handler(cmnd);
+ fc_block_scsi_eh(cmnd);
lpfc_cmd = (struct lpfc_scsi_buf *)cmnd->host_scribble;
BUG_ON(!lpfc_cmd);
@@ -3001,6 +2987,10 @@
icmd->ulpLe = 1;
icmd->ulpClass = cmd->ulpClass;
+
+ /* ABTS WQE must go to the same WQ as the WQE to be aborted */
+ abtsiocb->fcp_wqidx = iocb->fcp_wqidx;
+
if (lpfc_is_link_up(phba))
icmd->ulpCommand = CMD_ABORT_XRI_CN;
else
@@ -3016,7 +3006,8 @@
}
if (phba->cfg_poll & DISABLE_FCP_RING_INT)
- lpfc_sli_poll_fcp_ring (phba);
+ lpfc_sli_handle_fast_ring_event(phba,
+ &phba->sli.ring[LPFC_FCP_RING], HA_R0RE_REQ);
lpfc_cmd->waitq = &waitq;
/* Wait for abort to complete */
@@ -3166,9 +3157,15 @@
lpfc_chk_tgt_mapped(struct lpfc_vport *vport, struct scsi_cmnd *cmnd)
{
struct lpfc_rport_data *rdata = cmnd->device->hostdata;
- struct lpfc_nodelist *pnode = rdata->pnode;
+ struct lpfc_nodelist *pnode;
unsigned long later;
+ if (!rdata) {
+ lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP,
+ "0797 Tgt Map rport failure: rdata x%p\n", rdata);
+ return FAILED;
+ }
+ pnode = rdata->pnode;
/*
* If target is not in a MAPPED state, delay until
* target is rediscovered or devloss timeout expires.
@@ -3253,13 +3250,19 @@
struct Scsi_Host *shost = cmnd->device->host;
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
struct lpfc_rport_data *rdata = cmnd->device->hostdata;
- struct lpfc_nodelist *pnode = rdata->pnode;
+ struct lpfc_nodelist *pnode;
unsigned tgt_id = cmnd->device->id;
unsigned int lun_id = cmnd->device->lun;
struct lpfc_scsi_event_header scsi_event;
int status;
- lpfc_block_error_handler(cmnd);
+ if (!rdata) {
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
+ "0798 Device Reset rport failure: rdata x%p\n", rdata);
+ return FAILED;
+ }
+ pnode = rdata->pnode;
+ fc_block_scsi_eh(cmnd);
status = lpfc_chk_tgt_mapped(vport, cmnd);
if (status == FAILED) {
@@ -3312,13 +3315,19 @@
struct Scsi_Host *shost = cmnd->device->host;
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
struct lpfc_rport_data *rdata = cmnd->device->hostdata;
- struct lpfc_nodelist *pnode = rdata->pnode;
+ struct lpfc_nodelist *pnode;
unsigned tgt_id = cmnd->device->id;
unsigned int lun_id = cmnd->device->lun;
struct lpfc_scsi_event_header scsi_event;
int status;
- lpfc_block_error_handler(cmnd);
+ if (!rdata) {
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
+ "0799 Target Reset rport failure: rdata x%p\n", rdata);
+ return FAILED;
+ }
+ pnode = rdata->pnode;
+ fc_block_scsi_eh(cmnd);
status = lpfc_chk_tgt_mapped(vport, cmnd);
if (status == FAILED) {
@@ -3384,7 +3393,7 @@
fc_host_post_vendor_event(shost, fc_get_event_number(),
sizeof(scsi_event), (char *)&scsi_event, LPFC_NL_VENDOR_ID);
- lpfc_block_error_handler(cmnd);
+ fc_block_scsi_eh(cmnd);
/*
* Since the driver manages a single bus device, reset all
@@ -3498,6 +3507,8 @@
"Allocated %d buffers.\n",
num_to_alloc, num_allocated);
}
+ if (num_allocated > 0)
+ phba->total_scsi_bufs += num_allocated;
return 0;
}
@@ -3534,7 +3545,8 @@
rport->dev_loss_tmo = vport->cfg_devloss_tmo;
if (phba->cfg_poll & ENABLE_FCP_RING_POLLING) {
- lpfc_sli_poll_fcp_ring(phba);
+ lpfc_sli_handle_fast_ring_event(phba,
+ &phba->sli.ring[LPFC_FCP_RING], HA_R0RE_REQ);
if (phba->cfg_poll & DISABLE_FCP_RING_INT)
lpfc_poll_rearm_timer(phba);
}
@@ -3576,6 +3588,7 @@
.shost_attrs = lpfc_hba_attrs,
.max_sectors = 0xFFFF,
.vendor_id = LPFC_NL_VENDOR_ID,
+ .change_queue_depth = lpfc_change_queue_depth,
};
struct scsi_host_template lpfc_vport_template = {
@@ -3597,4 +3610,5 @@
.use_clustering = ENABLE_CLUSTERING,
.shost_attrs = lpfc_vport_attrs,
.max_sectors = 0xFFFF,
+ .change_queue_depth = lpfc_change_queue_depth,
};
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 43cbe33..7935667 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -30,6 +30,7 @@
#include <scsi/scsi_host.h>
#include <scsi/scsi_transport_fc.h>
#include <scsi/fc/fc_fs.h>
+#include <linux/aer.h>
#include "lpfc_hw4.h"
#include "lpfc_hw.h"
@@ -58,8 +59,11 @@
static int lpfc_sli_issue_mbox_s4(struct lpfc_hba *, LPFC_MBOXQ_t *,
uint32_t);
static int lpfc_sli4_read_rev(struct lpfc_hba *, LPFC_MBOXQ_t *,
- uint8_t *, uint32_t *);
-
+ uint8_t *, uint32_t *);
+static struct lpfc_iocbq *lpfc_sli4_els_wcqe_to_rspiocbq(struct lpfc_hba *,
+ struct lpfc_iocbq *);
+static void lpfc_sli4_send_seq_to_ulp(struct lpfc_vport *,
+ struct hbq_dmabuf *);
static IOCB_t *
lpfc_get_iocb_from_iocbq(struct lpfc_iocbq *iocbq)
{
@@ -259,6 +263,9 @@
bf_set(lpfc_eqcq_doorbell_qt, &doorbell, LPFC_QUEUE_TYPE_EVENT);
bf_set(lpfc_eqcq_doorbell_eqid, &doorbell, q->queue_id);
writel(doorbell.word0, q->phba->sli4_hba.EQCQDBregaddr);
+ /* PCI read to flush PCI pipeline on re-arming for INTx mode */
+ if ((q->phba->intr_type == INTx) && (arm == LPFC_QUEUE_REARM))
+ readl(q->phba->sli4_hba.EQCQDBregaddr);
return released;
}
@@ -515,6 +522,8 @@
struct lpfc_sglq *sglq = NULL;
uint16_t adj_xri;
list_remove_head(lpfc_sgl_list, sglq, struct lpfc_sglq, list);
+ if (!sglq)
+ return NULL;
adj_xri = sglq->sli4_xritag - phba->sli4_hba.max_cfg_param.xri_base;
phba->sli4_hba.lpfc_sglq_active_list[adj_xri] = sglq;
return sglq;
@@ -572,9 +581,9 @@
sglq = __lpfc_clear_active_sglq(phba, iocbq->sli4_xritag);
if (sglq) {
if (iocbq->iocb_flag & LPFC_DRIVER_ABORTED
- || ((iocbq->iocb.ulpStatus == IOSTAT_LOCAL_REJECT)
+ && ((iocbq->iocb.ulpStatus == IOSTAT_LOCAL_REJECT)
&& (iocbq->iocb.un.ulpWord[4]
- == IOERR_SLI_ABORTED))) {
+ == IOERR_ABORT_REQUESTED))) {
spin_lock_irqsave(&phba->sli4_hba.abts_sgl_list_lock,
iflag);
list_add(&sglq->list,
@@ -767,6 +776,7 @@
case CMD_CLOSE_XRI_CX:
case CMD_XRI_ABORTED_CX:
case CMD_ABORT_MXRI64_CN:
+ case CMD_XMIT_BLS_RSP64_CX:
type = LPFC_ABORT_IOCB;
break;
case CMD_RCV_SEQUENCE_CX:
@@ -1794,7 +1804,7 @@
*/
if (lpfc_sli_chk_mbx_command(pmbox->mbxCommand) ==
MBX_SHUTDOWN) {
- /* Unknow mailbox command compl */
+ /* Unknown mailbox command compl */
lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
"(%d):0323 Unknown Mailbox command "
"x%x (x%x) Cmpl\n",
@@ -2068,8 +2078,8 @@
if ((irsp->ulpCommand == CMD_RCV_ELS_REQ64_CX) ||
(irsp->ulpCommand == CMD_RCV_ELS_REQ_CX) ||
(irsp->ulpCommand == CMD_IOCB_RCV_ELS64_CX)) {
- Rctl = FC_ELS_REQ;
- Type = FC_ELS_DATA;
+ Rctl = FC_RCTL_ELS_REQ;
+ Type = FC_TYPE_ELS;
} else {
w5p = (WORD5 *)&(saveq->iocb.un.ulpWord[5]);
Rctl = w5p->hcsw.Rctl;
@@ -2079,8 +2089,8 @@
if ((Rctl == 0) && (pring->ringno == LPFC_ELS_RING) &&
(irsp->ulpCommand == CMD_RCV_SEQUENCE64_CX ||
irsp->ulpCommand == CMD_IOCB_RCV_SEQ64_CX)) {
- Rctl = FC_ELS_REQ;
- Type = FC_ELS_DATA;
+ Rctl = FC_RCTL_ELS_REQ;
+ Type = FC_TYPE_ELS;
w5p->hcsw.Rctl = Rctl;
w5p->hcsw.Type = Type;
}
@@ -2324,168 +2334,6 @@
return;
}
-/**
- * lpfc_sli_poll_fcp_ring - Handle FCP ring completion in polling mode
- * @phba: Pointer to HBA context object.
- *
- * This function is called from lpfc_queuecommand, lpfc_poll_timeout,
- * lpfc_abort_handler and lpfc_slave_configure when FCP_RING_POLLING
- * is enabled.
- *
- * The caller does not hold any lock.
- * The function processes each response iocb in the response ring until it
- * finds an iocb with LE bit set and chains all the iocbs upto the iocb with
- * LE bit set. The function will call the completion handler of the command iocb
- * if the response iocb indicates a completion for a command iocb or it is
- * an abort completion.
- **/
-void lpfc_sli_poll_fcp_ring(struct lpfc_hba *phba)
-{
- struct lpfc_sli *psli = &phba->sli;
- struct lpfc_sli_ring *pring = &psli->ring[LPFC_FCP_RING];
- IOCB_t *irsp = NULL;
- IOCB_t *entry = NULL;
- struct lpfc_iocbq *cmdiocbq = NULL;
- struct lpfc_iocbq rspiocbq;
- struct lpfc_pgp *pgp = &phba->port_gp[pring->ringno];
- uint32_t status;
- uint32_t portRspPut, portRspMax;
- int type;
- uint32_t rsp_cmpl = 0;
- uint32_t ha_copy;
- unsigned long iflags;
-
- pring->stats.iocb_event++;
-
- /*
- * The next available response entry should never exceed the maximum
- * entries. If it does, treat it as an adapter hardware error.
- */
- portRspMax = pring->numRiocb;
- portRspPut = le32_to_cpu(pgp->rspPutInx);
- if (unlikely(portRspPut >= portRspMax)) {
- lpfc_sli_rsp_pointers_error(phba, pring);
- return;
- }
-
- rmb();
- while (pring->rspidx != portRspPut) {
- entry = lpfc_resp_iocb(phba, pring);
- if (++pring->rspidx >= portRspMax)
- pring->rspidx = 0;
-
- lpfc_sli_pcimem_bcopy((uint32_t *) entry,
- (uint32_t *) &rspiocbq.iocb,
- phba->iocb_rsp_size);
- irsp = &rspiocbq.iocb;
- type = lpfc_sli_iocb_cmd_type(irsp->ulpCommand & CMD_IOCB_MASK);
- pring->stats.iocb_rsp++;
- rsp_cmpl++;
-
- if (unlikely(irsp->ulpStatus)) {
- /* Rsp ring <ringno> error: IOCB */
- lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
- "0326 Rsp Ring %d error: IOCB Data: "
- "x%x x%x x%x x%x x%x x%x x%x x%x\n",
- pring->ringno,
- irsp->un.ulpWord[0],
- irsp->un.ulpWord[1],
- irsp->un.ulpWord[2],
- irsp->un.ulpWord[3],
- irsp->un.ulpWord[4],
- irsp->un.ulpWord[5],
- *(uint32_t *)&irsp->un1,
- *((uint32_t *)&irsp->un1 + 1));
- }
-
- switch (type) {
- case LPFC_ABORT_IOCB:
- case LPFC_SOL_IOCB:
- /*
- * Idle exchange closed via ABTS from port. No iocb
- * resources need to be recovered.
- */
- if (unlikely(irsp->ulpCommand == CMD_XRI_ABORTED_CX)) {
- lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
- "0314 IOCB cmd 0x%x "
- "processed. Skipping "
- "completion",
- irsp->ulpCommand);
- break;
- }
-
- spin_lock_irqsave(&phba->hbalock, iflags);
- cmdiocbq = lpfc_sli_iocbq_lookup(phba, pring,
- &rspiocbq);
- spin_unlock_irqrestore(&phba->hbalock, iflags);
- if ((cmdiocbq) && (cmdiocbq->iocb_cmpl)) {
- (cmdiocbq->iocb_cmpl)(phba, cmdiocbq,
- &rspiocbq);
- }
- break;
- default:
- if (irsp->ulpCommand == CMD_ADAPTER_MSG) {
- char adaptermsg[LPFC_MAX_ADPTMSG];
- memset(adaptermsg, 0, LPFC_MAX_ADPTMSG);
- memcpy(&adaptermsg[0], (uint8_t *) irsp,
- MAX_MSG_DATA);
- dev_warn(&((phba->pcidev)->dev),
- "lpfc%d: %s\n",
- phba->brd_no, adaptermsg);
- } else {
- /* Unknown IOCB command */
- lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
- "0321 Unknown IOCB command "
- "Data: x%x, x%x x%x x%x x%x\n",
- type, irsp->ulpCommand,
- irsp->ulpStatus,
- irsp->ulpIoTag,
- irsp->ulpContext);
- }
- break;
- }
-
- /*
- * The response IOCB has been processed. Update the ring
- * pointer in SLIM. If the port response put pointer has not
- * been updated, sync the pgp->rspPutInx and fetch the new port
- * response put pointer.
- */
- writel(pring->rspidx, &phba->host_gp[pring->ringno].rspGetInx);
-
- if (pring->rspidx == portRspPut)
- portRspPut = le32_to_cpu(pgp->rspPutInx);
- }
-
- ha_copy = readl(phba->HAregaddr);
- ha_copy >>= (LPFC_FCP_RING * 4);
-
- if ((rsp_cmpl > 0) && (ha_copy & HA_R0RE_REQ)) {
- spin_lock_irqsave(&phba->hbalock, iflags);
- pring->stats.iocb_rsp_full++;
- status = ((CA_R0ATT | CA_R0RE_RSP) << (LPFC_FCP_RING * 4));
- writel(status, phba->CAregaddr);
- readl(phba->CAregaddr);
- spin_unlock_irqrestore(&phba->hbalock, iflags);
- }
- if ((ha_copy & HA_R0CE_RSP) &&
- (pring->flag & LPFC_CALL_RING_AVAILABLE)) {
- spin_lock_irqsave(&phba->hbalock, iflags);
- pring->flag &= ~LPFC_CALL_RING_AVAILABLE;
- pring->stats.iocb_cmd_empty++;
-
- /* Force update of the local copy of cmdGetInx */
- pring->local_getidx = le32_to_cpu(pgp->cmdGetInx);
- lpfc_sli_resume_iocb(phba, pring);
-
- if ((pring->lpfc_sli_cmd_available))
- (pring->lpfc_sli_cmd_available) (phba, pring);
-
- spin_unlock_irqrestore(&phba->hbalock, iflags);
- }
-
- return;
-}
/**
* lpfc_sli_handle_fast_ring_event - Handle ring events on FCP ring
@@ -2502,9 +2350,9 @@
* an abort completion. The function will call lpfc_sli_process_unsol_iocb
* function if this is an unsolicited iocb.
* This routine presumes LPFC_FCP_RING handling and doesn't bother
- * to check it explicitly. This function always returns 1.
- **/
-static int
+ * to check it explicitly.
+ */
+int
lpfc_sli_handle_fast_ring_event(struct lpfc_hba *phba,
struct lpfc_sli_ring *pring, uint32_t mask)
{
@@ -2534,6 +2382,11 @@
spin_unlock_irqrestore(&phba->hbalock, iflag);
return 1;
}
+ if (phba->fcp_ring_in_use) {
+ spin_unlock_irqrestore(&phba->hbalock, iflag);
+ return 1;
+ } else
+ phba->fcp_ring_in_use = 1;
rmb();
while (pring->rspidx != portRspPut) {
@@ -2604,10 +2457,6 @@
cmdiocbq = lpfc_sli_iocbq_lookup(phba, pring,
&rspiocbq);
if ((cmdiocbq) && (cmdiocbq->iocb_cmpl)) {
- if (phba->cfg_poll & ENABLE_FCP_RING_POLLING) {
- (cmdiocbq->iocb_cmpl)(phba, cmdiocbq,
- &rspiocbq);
- } else {
spin_unlock_irqrestore(&phba->hbalock,
iflag);
(cmdiocbq->iocb_cmpl)(phba, cmdiocbq,
@@ -2615,7 +2464,6 @@
spin_lock_irqsave(&phba->hbalock,
iflag);
}
- }
break;
case LPFC_UNSOL_IOCB:
spin_unlock_irqrestore(&phba->hbalock, iflag);
@@ -2675,6 +2523,7 @@
}
+ phba->fcp_ring_in_use = 0;
spin_unlock_irqrestore(&phba->hbalock, iflag);
return rc;
}
@@ -3018,16 +2867,39 @@
struct lpfc_sli_ring *pring, uint32_t mask)
{
struct lpfc_iocbq *irspiocbq;
+ struct hbq_dmabuf *dmabuf;
+ struct lpfc_cq_event *cq_event;
unsigned long iflag;
- while (!list_empty(&phba->sli4_hba.sp_rspiocb_work_queue)) {
+ spin_lock_irqsave(&phba->hbalock, iflag);
+ phba->hba_flag &= ~HBA_SP_QUEUE_EVT;
+ spin_unlock_irqrestore(&phba->hbalock, iflag);
+ while (!list_empty(&phba->sli4_hba.sp_queue_event)) {
/* Get the response iocb from the head of work queue */
spin_lock_irqsave(&phba->hbalock, iflag);
- list_remove_head(&phba->sli4_hba.sp_rspiocb_work_queue,
- irspiocbq, struct lpfc_iocbq, list);
+ list_remove_head(&phba->sli4_hba.sp_queue_event,
+ cq_event, struct lpfc_cq_event, list);
spin_unlock_irqrestore(&phba->hbalock, iflag);
- /* Process the response iocb */
- lpfc_sli_sp_handle_rspiocb(phba, pring, irspiocbq);
+
+ switch (bf_get(lpfc_wcqe_c_code, &cq_event->cqe.wcqe_cmpl)) {
+ case CQE_CODE_COMPL_WQE:
+ irspiocbq = container_of(cq_event, struct lpfc_iocbq,
+ cq_event);
+ /* Translate ELS WCQE to response IOCBQ */
+ irspiocbq = lpfc_sli4_els_wcqe_to_rspiocbq(phba,
+ irspiocbq);
+ if (irspiocbq)
+ lpfc_sli_sp_handle_rspiocb(phba, pring,
+ irspiocbq);
+ break;
+ case CQE_CODE_RECEIVE:
+ dmabuf = container_of(cq_event, struct hbq_dmabuf,
+ cq_event);
+ lpfc_sli4_handle_received_buffer(phba, dmabuf);
+ break;
+ default:
+ break;
+ }
}
}
@@ -3416,6 +3288,7 @@
/* perform board reset */
phba->fc_eventTag = 0;
+ phba->link_events = 0;
phba->pport->fc_myDID = 0;
phba->pport->fc_prevDID = 0;
@@ -3476,6 +3349,7 @@
/* perform board reset */
phba->fc_eventTag = 0;
+ phba->link_events = 0;
phba->pport->fc_myDID = 0;
phba->pport->fc_prevDID = 0;
@@ -3495,7 +3369,6 @@
list_del_init(&phba->sli4_hba.dat_rq->list);
list_del_init(&phba->sli4_hba.mbx_cq->list);
list_del_init(&phba->sli4_hba.els_cq->list);
- list_del_init(&phba->sli4_hba.rxq_cq->list);
for (qindx = 0; qindx < phba->cfg_fcp_wq_count; qindx++)
list_del_init(&phba->sli4_hba.fcp_wq[qindx]->list);
for (qindx = 0; qindx < phba->cfg_fcp_eq_count; qindx++)
@@ -3531,9 +3404,13 @@
struct lpfc_sli *psli;
volatile uint32_t word0;
void __iomem *to_slim;
+ uint32_t hba_aer_enabled;
spin_lock_irq(&phba->hbalock);
+ /* Take PCIe device Advanced Error Reporting (AER) state */
+ hba_aer_enabled = phba->hba_flag & HBA_AER_ENABLED;
+
psli = &phba->sli;
/* Restart HBA */
@@ -3573,6 +3450,10 @@
/* Give the INITFF and Post time to settle. */
mdelay(100);
+ /* Reset HBA AER if it was enabled, note hba_flag was reset above */
+ if (hba_aer_enabled)
+ pci_disable_pcie_error_reporting(phba->pcidev);
+
lpfc_hba_down_post(phba);
return 0;
@@ -4042,6 +3923,24 @@
if (rc)
goto lpfc_sli_hba_setup_error;
+ /* Enable PCIe device Advanced Error Reporting (AER) if configured */
+ if (phba->cfg_aer_support == 1 && !(phba->hba_flag & HBA_AER_ENABLED)) {
+ rc = pci_enable_pcie_error_reporting(phba->pcidev);
+ if (!rc) {
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "2709 This device supports "
+ "Advanced Error Reporting (AER)\n");
+ spin_lock_irq(&phba->hbalock);
+ phba->hba_flag |= HBA_AER_ENABLED;
+ spin_unlock_irq(&phba->hbalock);
+ } else {
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "2708 This device does not support "
+ "Advanced Error Reporting (AER)\n");
+ phba->cfg_aer_support = 0;
+ }
+ }
+
if (phba->sli_rev == 3) {
phba->iocb_cmd_size = SLI3_IOCB_CMD_SIZE;
phba->iocb_rsp_size = SLI3_IOCB_RSP_SIZE;
@@ -4163,7 +4062,7 @@
* addition, this routine gets the port vpd data.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* ENOMEM - could not allocated memory.
**/
static int
@@ -4243,7 +4142,6 @@
lpfc_sli4_cq_release(phba->sli4_hba.mbx_cq, LPFC_QUEUE_REARM);
lpfc_sli4_cq_release(phba->sli4_hba.els_cq, LPFC_QUEUE_REARM);
- lpfc_sli4_cq_release(phba->sli4_hba.rxq_cq, LPFC_QUEUE_REARM);
for (fcp_eqidx = 0; fcp_eqidx < phba->cfg_fcp_eq_count; fcp_eqidx++)
lpfc_sli4_cq_release(phba->sli4_hba.fcp_cq[fcp_eqidx],
LPFC_QUEUE_REARM);
@@ -4322,6 +4220,13 @@
phba->sli_rev = bf_get(lpfc_mbx_rd_rev_sli_lvl, &mqe->un.read_rev);
if (bf_get(lpfc_mbx_rd_rev_fcoe, &mqe->un.read_rev))
phba->hba_flag |= HBA_FCOE_SUPPORT;
+
+ if (bf_get(lpfc_mbx_rd_rev_cee_ver, &mqe->un.read_rev) ==
+ LPFC_DCBX_CEE_MODE)
+ phba->hba_flag |= HBA_FIP_SUPPORT;
+ else
+ phba->hba_flag &= ~HBA_FIP_SUPPORT;
+
if (phba->sli_rev != LPFC_SLI_REV4 ||
!(phba->hba_flag & HBA_FCOE_SUPPORT)) {
lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
@@ -4468,7 +4373,8 @@
rc = lpfc_sli4_post_sgl_list(phba);
if (unlikely(rc)) {
lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
- "0582 Error %d during sgl post operation", rc);
+ "0582 Error %d during sgl post operation\n",
+ rc);
rc = -ENODEV;
goto out_free_vpd;
}
@@ -4477,8 +4383,8 @@
rc = lpfc_sli4_repost_scsi_sgl_list(phba);
if (unlikely(rc)) {
lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX | LOG_SLI,
- "0383 Error %d during scsi sgl post opeation",
- rc);
+ "0383 Error %d during scsi sgl post "
+ "operation\n", rc);
/* Some Scsi buffers were moved to the abort scsi list */
/* A pci function reset will repost them */
rc = -ENODEV;
@@ -4494,10 +4400,6 @@
rc = -ENODEV;
goto out_free_vpd;
}
- if (phba->cfg_enable_fip)
- bf_set(lpfc_fip_flag, &phba->sli4_hba.sli4_flags, 1);
- else
- bf_set(lpfc_fip_flag, &phba->sli4_hba.sli4_flags, 0);
/* Set up all the queues to the device */
rc = lpfc_sli4_queue_setup(phba);
@@ -5669,7 +5571,7 @@
case CMD_GEN_REQUEST64_CX:
if (!(phba->sli.sli_flag & LPFC_MENLO_MAINT) ||
(piocb->iocb.un.genreq64.w5.hcsw.Rctl !=
- FC_FCP_CMND) ||
+ FC_RCTL_DD_UNSOL_CMD) ||
(piocb->iocb.un.genreq64.w5.hcsw.Type !=
MENLO_TRANSPORT_TYPE))
@@ -5849,7 +5751,7 @@
lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq,
union lpfc_wqe *wqe)
{
- uint32_t payload_len = 0;
+ uint32_t xmit_len = 0, total_len = 0;
uint8_t ct = 0;
uint32_t fip;
uint32_t abort_tag;
@@ -5857,12 +5759,15 @@
uint8_t cmnd;
uint16_t xritag;
struct ulp_bde64 *bpl = NULL;
+ uint32_t els_id = ELS_ID_DEFAULT;
+ int numBdes, i;
+ struct ulp_bde64 bde;
- fip = bf_get(lpfc_fip_flag, &phba->sli4_hba.sli4_flags);
+ fip = phba->hba_flag & HBA_FIP_SUPPORT;
/* The fcp commands will set command type */
if (iocbq->iocb_flag & LPFC_IO_FCP)
command_type = FCP_COMMAND;
- else if (fip && (iocbq->iocb_flag & LPFC_FIP_ELS))
+ else if (fip && (iocbq->iocb_flag & LPFC_FIP_ELS_ID_MASK))
command_type = ELS_COMMAND_FIP;
else
command_type = ELS_COMMAND_NON_FIP;
@@ -5874,6 +5779,8 @@
wqe->words[7] = 0; /* The ct field has moved so reset */
/* words0-2 bpl convert bde */
if (iocbq->iocb.un.genreq64.bdl.bdeFlags == BUFF_TYPE_BLP_64) {
+ numBdes = iocbq->iocb.un.genreq64.bdl.bdeSize /
+ sizeof(struct ulp_bde64);
bpl = (struct ulp_bde64 *)
((struct lpfc_dmabuf *)iocbq->context3)->virt;
if (!bpl)
@@ -5886,9 +5793,14 @@
* can assign it to the sgl.
*/
wqe->generic.bde.tus.w = le32_to_cpu(bpl->tus.w);
- payload_len = wqe->generic.bde.tus.f.bdeSize;
+ xmit_len = wqe->generic.bde.tus.f.bdeSize;
+ total_len = 0;
+ for (i = 0; i < numBdes; i++) {
+ bde.tus.w = le32_to_cpu(bpl[i].tus.w);
+ total_len += bde.tus.f.bdeSize;
+ }
} else
- payload_len = iocbq->iocb.un.fcpi64.bdl.bdeSize;
+ xmit_len = iocbq->iocb.un.fcpi64.bdl.bdeSize;
iocbq->iocb.ulpIoTag = iocbq->iotag;
cmnd = iocbq->iocb.ulpCommand;
@@ -5902,7 +5814,7 @@
iocbq->iocb.ulpCommand);
return IOCB_ERROR;
}
- wqe->els_req.payload_len = payload_len;
+ wqe->els_req.payload_len = xmit_len;
/* Els_reguest64 has a TMO */
bf_set(wqe_tmo, &wqe->els_req.wqe_com,
iocbq->iocb.ulpTimeout);
@@ -5923,7 +5835,23 @@
bf_set(lpfc_wqe_gen_ct, &wqe->generic, ct);
bf_set(lpfc_wqe_gen_pu, &wqe->generic, 0);
/* CCP CCPE PV PRI in word10 were set in the memcpy */
+
+ if (command_type == ELS_COMMAND_FIP) {
+ els_id = ((iocbq->iocb_flag & LPFC_FIP_ELS_ID_MASK)
+ >> LPFC_FIP_ELS_ID_SHIFT);
+ }
+ bf_set(lpfc_wqe_gen_els_id, &wqe->generic, els_id);
+
break;
+ case CMD_XMIT_SEQUENCE64_CX:
+ bf_set(lpfc_wqe_gen_context, &wqe->generic,
+ iocbq->iocb.un.ulpWord[3]);
+ wqe->generic.word3 = 0;
+ bf_set(wqe_rcvoxid, &wqe->generic, iocbq->iocb.ulpContext);
+ bf_set(wqe_xc, &wqe->generic, 1);
+ /* The entire sequence is transmitted for this IOCB */
+ xmit_len = total_len;
+ cmnd = CMD_XMIT_SEQUENCE64_CR;
case CMD_XMIT_SEQUENCE64_CR:
/* word3 iocb=io_tag32 wqe=payload_offset */
/* payload offset used for multilpe outstanding
@@ -5933,7 +5861,8 @@
/* word4 relative_offset memcpy */
/* word5 r_ctl/df_ctl memcpy */
bf_set(lpfc_wqe_gen_pu, &wqe->generic, 0);
- wqe->xmit_sequence.xmit_len = payload_len;
+ wqe->xmit_sequence.xmit_len = xmit_len;
+ command_type = OTHER_COMMAND;
break;
case CMD_XMIT_BCAST64_CN:
/* word3 iocb=iotag32 wqe=payload_len */
@@ -5962,7 +5891,7 @@
case CMD_FCP_IREAD64_CR:
/* FCP_CMD is always the 1st sgl entry */
wqe->fcp_iread.payload_len =
- payload_len + sizeof(struct fcp_rsp);
+ xmit_len + sizeof(struct fcp_rsp);
/* word 4 (xfer length) should have been set on the memcpy */
@@ -5999,7 +5928,7 @@
* sgl[1] = rsp.
*
*/
- wqe->gen_req.command_len = payload_len;
+ wqe->gen_req.command_len = xmit_len;
/* Word4 parameter copied in the memcpy */
/* Word5 [rctl, type, df_ctl, la] copied in memcpy */
/* word6 context tag copied in memcpy */
@@ -6066,6 +5995,38 @@
command_type = OTHER_COMMAND;
xritag = 0;
break;
+ case CMD_XMIT_BLS_RSP64_CX:
+ /* As BLS ABTS-ACC WQE is very different from other WQEs,
+ * we re-construct this WQE here based on information in
+ * iocbq from scratch.
+ */
+ memset(wqe, 0, sizeof(union lpfc_wqe));
+ /* OX_ID is invariable to who sent ABTS to CT exchange */
+ bf_set(xmit_bls_rsp64_oxid, &wqe->xmit_bls_rsp,
+ bf_get(lpfc_abts_oxid, &iocbq->iocb.un.bls_acc));
+ if (bf_get(lpfc_abts_orig, &iocbq->iocb.un.bls_acc) ==
+ LPFC_ABTS_UNSOL_INT) {
+ /* ABTS sent by initiator to CT exchange, the
+ * RX_ID field will be filled with the newly
+ * allocated responder XRI.
+ */
+ bf_set(xmit_bls_rsp64_rxid, &wqe->xmit_bls_rsp,
+ iocbq->sli4_xritag);
+ } else {
+ /* ABTS sent by responder to CT exchange, the
+ * RX_ID field will be filled with the responder
+ * RX_ID from ABTS.
+ */
+ bf_set(xmit_bls_rsp64_rxid, &wqe->xmit_bls_rsp,
+ bf_get(lpfc_abts_rxid, &iocbq->iocb.un.bls_acc));
+ }
+ bf_set(xmit_bls_rsp64_seqcnthi, &wqe->xmit_bls_rsp, 0xffff);
+ bf_set(wqe_xmit_bls_pt, &wqe->xmit_bls_rsp.wqe_dest, 0x1);
+ bf_set(wqe_ctxt_tag, &wqe->xmit_bls_rsp.wqe_com,
+ iocbq->iocb.ulpContext);
+ /* Overwrite the pre-set comnd type with OTHER_COMMAND */
+ command_type = OTHER_COMMAND;
+ break;
case CMD_XRI_ABORTED_CX:
case CMD_CREATE_XRI_CR: /* Do we expect to use this? */
/* words0-2 are all 0's no bde */
@@ -6120,11 +6081,10 @@
uint16_t xritag;
union lpfc_wqe wqe;
struct lpfc_sli_ring *pring = &phba->sli.ring[ring_number];
- uint32_t fcp_wqidx;
if (piocb->sli4_xritag == NO_XRI) {
if (piocb->iocb.ulpCommand == CMD_ABORT_XRI_CN ||
- piocb->iocb.ulpCommand == CMD_CLOSE_XRI_CN)
+ piocb->iocb.ulpCommand == CMD_CLOSE_XRI_CN)
sglq = NULL;
else {
sglq = __lpfc_sli_get_sglq(phba);
@@ -6155,8 +6115,17 @@
return IOCB_ERROR;
if (piocb->iocb_flag & LPFC_IO_FCP) {
- fcp_wqidx = lpfc_sli4_scmd_to_wqidx_distr(phba);
- if (lpfc_sli4_wq_put(phba->sli4_hba.fcp_wq[fcp_wqidx], &wqe))
+ /*
+ * For FCP command IOCB, get a new WQ index to distribute
+ * WQE across the WQsr. On the other hand, for abort IOCB,
+ * it carries the same WQ index to the original command
+ * IOCB.
+ */
+ if ((piocb->iocb.ulpCommand != CMD_ABORT_XRI_CN) &&
+ (piocb->iocb.ulpCommand != CMD_CLOSE_XRI_CN))
+ piocb->fcp_wqidx = lpfc_sli4_scmd_to_wqidx_distr(phba);
+ if (lpfc_sli4_wq_put(phba->sli4_hba.fcp_wq[piocb->fcp_wqidx],
+ &wqe))
return IOCB_ERROR;
} else {
if (lpfc_sli4_wq_put(phba->sli4_hba.els_wq, &wqe))
@@ -6449,31 +6418,37 @@
pring->iotag_max = 4096;
pring->lpfc_sli_rcv_async_status =
lpfc_sli_async_event_handler;
- pring->num_mask = 4;
+ pring->num_mask = LPFC_MAX_RING_MASK;
pring->prt[0].profile = 0; /* Mask 0 */
- pring->prt[0].rctl = FC_ELS_REQ;
- pring->prt[0].type = FC_ELS_DATA;
+ pring->prt[0].rctl = FC_RCTL_ELS_REQ;
+ pring->prt[0].type = FC_TYPE_ELS;
pring->prt[0].lpfc_sli_rcv_unsol_event =
lpfc_els_unsol_event;
pring->prt[1].profile = 0; /* Mask 1 */
- pring->prt[1].rctl = FC_ELS_RSP;
- pring->prt[1].type = FC_ELS_DATA;
+ pring->prt[1].rctl = FC_RCTL_ELS_REP;
+ pring->prt[1].type = FC_TYPE_ELS;
pring->prt[1].lpfc_sli_rcv_unsol_event =
lpfc_els_unsol_event;
pring->prt[2].profile = 0; /* Mask 2 */
/* NameServer Inquiry */
- pring->prt[2].rctl = FC_UNSOL_CTL;
+ pring->prt[2].rctl = FC_RCTL_DD_UNSOL_CTL;
/* NameServer */
- pring->prt[2].type = FC_COMMON_TRANSPORT_ULP;
+ pring->prt[2].type = FC_TYPE_CT;
pring->prt[2].lpfc_sli_rcv_unsol_event =
lpfc_ct_unsol_event;
pring->prt[3].profile = 0; /* Mask 3 */
/* NameServer response */
- pring->prt[3].rctl = FC_SOL_CTL;
+ pring->prt[3].rctl = FC_RCTL_DD_SOL_CTL;
/* NameServer */
- pring->prt[3].type = FC_COMMON_TRANSPORT_ULP;
+ pring->prt[3].type = FC_TYPE_CT;
pring->prt[3].lpfc_sli_rcv_unsol_event =
lpfc_ct_unsol_event;
+ /* abort unsolicited sequence */
+ pring->prt[4].profile = 0; /* Mask 4 */
+ pring->prt[4].rctl = FC_RCTL_BA_ABTS;
+ pring->prt[4].type = FC_TYPE_BLS;
+ pring->prt[4].lpfc_sli_rcv_unsol_event =
+ lpfc_sli4_ct_abort_unsol_event;
break;
}
totiocbsize += (pring->numCiocb * pring->sizeCiocb) +
@@ -6976,8 +6951,18 @@
abort_iotag = cmdiocb->iocb.un.acxri.abortIoTag;
spin_lock_irq(&phba->hbalock);
- if (abort_iotag != 0 && abort_iotag <= phba->sli.last_iotag)
- abort_iocb = phba->sli.iocbq_lookup[abort_iotag];
+ if (phba->sli_rev < LPFC_SLI_REV4) {
+ if (abort_iotag != 0 &&
+ abort_iotag <= phba->sli.last_iotag)
+ abort_iocb =
+ phba->sli.iocbq_lookup[abort_iotag];
+ } else
+ /* For sli4 the abort_tag is the XRI,
+ * so the abort routine puts the iotag of the iocb
+ * being aborted in the context field of the abort
+ * IOCB.
+ */
+ abort_iocb = phba->sli.iocbq_lookup[abort_context];
lpfc_printf_log(phba, KERN_INFO, LOG_ELS | LOG_SLI,
"0327 Cannot abort els iocb %p "
@@ -6991,9 +6976,18 @@
* might have completed already. Do not free it again.
*/
if (irsp->ulpStatus == IOSTAT_LOCAL_REJECT) {
- spin_unlock_irq(&phba->hbalock);
- lpfc_sli_release_iocbq(phba, cmdiocb);
- return;
+ if (irsp->un.ulpWord[4] != IOERR_NO_XRI) {
+ spin_unlock_irq(&phba->hbalock);
+ lpfc_sli_release_iocbq(phba, cmdiocb);
+ return;
+ }
+ /* For SLI4 the ulpContext field for abort IOCB
+ * holds the iotag of the IOCB being aborted so
+ * the local abort_context needs to be reset to
+ * match the aborted IOCBs ulpContext.
+ */
+ if (abort_iocb && phba->sli_rev == LPFC_SLI_REV4)
+ abort_context = abort_iocb->iocb.ulpContext;
}
/*
* make sure we have the right iocbq before taking it
@@ -7112,13 +7106,18 @@
iabt = &abtsiocbp->iocb;
iabt->un.acxri.abortType = ABORT_TYPE_ABTS;
iabt->un.acxri.abortContextTag = icmd->ulpContext;
- if (phba->sli_rev == LPFC_SLI_REV4)
+ if (phba->sli_rev == LPFC_SLI_REV4) {
iabt->un.acxri.abortIoTag = cmdiocb->sli4_xritag;
+ iabt->un.acxri.abortContextTag = cmdiocb->iotag;
+ }
else
iabt->un.acxri.abortIoTag = icmd->ulpIoTag;
iabt->ulpLe = 1;
iabt->ulpClass = icmd->ulpClass;
+ /* ABTS WQE must go to the same WQ as the WQE to be aborted */
+ abtsiocbp->fcp_wqidx = cmdiocb->fcp_wqidx;
+
if (phba->link_state >= LPFC_LINK_UP)
iabt->ulpCommand = CMD_ABORT_XRI_CN;
else
@@ -7322,6 +7321,9 @@
abtsiocb->iocb.ulpClass = cmd->ulpClass;
abtsiocb->vport = phba->pport;
+ /* ABTS WQE must go to the same WQ as the WQE to be aborted */
+ abtsiocb->fcp_wqidx = iocbq->fcp_wqidx;
+
if (lpfc_is_link_up(phba))
abtsiocb->iocb.ulpCommand = CMD_ABORT_XRI_CN;
else
@@ -7687,31 +7689,28 @@
lpfc_sli4_eratt_read(struct lpfc_hba *phba)
{
uint32_t uerr_sta_hi, uerr_sta_lo;
- uint32_t onlnreg0, onlnreg1;
/* For now, use the SLI4 device internal unrecoverable error
* registers for error attention. This can be changed later.
*/
- onlnreg0 = readl(phba->sli4_hba.ONLINE0regaddr);
- onlnreg1 = readl(phba->sli4_hba.ONLINE1regaddr);
- if ((onlnreg0 != LPFC_ONLINE_NERR) || (onlnreg1 != LPFC_ONLINE_NERR)) {
- uerr_sta_lo = readl(phba->sli4_hba.UERRLOregaddr);
- uerr_sta_hi = readl(phba->sli4_hba.UERRHIregaddr);
- if (uerr_sta_lo || uerr_sta_hi) {
- lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "1423 HBA Unrecoverable error: "
- "uerr_lo_reg=0x%x, uerr_hi_reg=0x%x, "
- "online0_reg=0x%x, online1_reg=0x%x\n",
- uerr_sta_lo, uerr_sta_hi,
- onlnreg0, onlnreg1);
- phba->work_status[0] = uerr_sta_lo;
- phba->work_status[1] = uerr_sta_hi;
- /* Set the driver HA work bitmap */
- phba->work_ha |= HA_ERATT;
- /* Indicate polling handles this ERATT */
- phba->hba_flag |= HBA_ERATT_HANDLED;
- return 1;
- }
+ uerr_sta_lo = readl(phba->sli4_hba.UERRLOregaddr);
+ uerr_sta_hi = readl(phba->sli4_hba.UERRHIregaddr);
+ if ((~phba->sli4_hba.ue_mask_lo & uerr_sta_lo) ||
+ (~phba->sli4_hba.ue_mask_hi & uerr_sta_hi)) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1423 HBA Unrecoverable error: "
+ "uerr_lo_reg=0x%x, uerr_hi_reg=0x%x, "
+ "ue_mask_lo_reg=0x%x, ue_mask_hi_reg=0x%x\n",
+ uerr_sta_lo, uerr_sta_hi,
+ phba->sli4_hba.ue_mask_lo,
+ phba->sli4_hba.ue_mask_hi);
+ phba->work_status[0] = uerr_sta_lo;
+ phba->work_status[1] = uerr_sta_hi;
+ /* Set the driver HA work bitmap */
+ phba->work_ha |= HA_ERATT;
+ /* Indicate polling handles this ERATT */
+ phba->hba_flag |= HBA_ERATT_HANDLED;
+ return 1;
}
return 0;
}
@@ -7834,7 +7833,7 @@
lpfc_sli_sp_intr_handler(int irq, void *dev_id)
{
struct lpfc_hba *phba;
- uint32_t ha_copy;
+ uint32_t ha_copy, hc_copy;
uint32_t work_ha_copy;
unsigned long status;
unsigned long iflag;
@@ -7892,8 +7891,13 @@
}
/* Clear up only attention source related to slow-path */
+ hc_copy = readl(phba->HCregaddr);
+ writel(hc_copy & ~(HC_MBINT_ENA | HC_R2INT_ENA |
+ HC_LAINT_ENA | HC_ERINT_ENA),
+ phba->HCregaddr);
writel((ha_copy & (HA_MBATT | HA_R2_CLR_MSK)),
phba->HAregaddr);
+ writel(hc_copy, phba->HCregaddr);
readl(phba->HAregaddr); /* flush */
spin_unlock_irqrestore(&phba->hbalock, iflag);
} else
@@ -8049,7 +8053,7 @@
KERN_ERR,
LOG_MBOX | LOG_SLI,
"0350 rc should have"
- "been MBX_BUSY");
+ "been MBX_BUSY\n");
if (rc != MBX_NOT_FINISHED)
goto send_current_mbox;
}
@@ -8078,7 +8082,7 @@
if (rc != MBX_SUCCESS)
lpfc_printf_log(phba, KERN_ERR, LOG_MBOX |
LOG_SLI, "0349 rc should be "
- "MBX_SUCCESS");
+ "MBX_SUCCESS\n");
}
spin_lock_irqsave(&phba->hbalock, iflag);
@@ -8203,6 +8207,7 @@
struct lpfc_hba *phba;
irqreturn_t sp_irq_rc, fp_irq_rc;
unsigned long status1, status2;
+ uint32_t hc_copy;
/*
* Get the driver's phba structure from the dev_id and
@@ -8240,7 +8245,12 @@
}
/* Clear attention sources except link and error attentions */
+ hc_copy = readl(phba->HCregaddr);
+ writel(hc_copy & ~(HC_MBINT_ENA | HC_R0INT_ENA | HC_R1INT_ENA
+ | HC_R2INT_ENA | HC_LAINT_ENA | HC_ERINT_ENA),
+ phba->HCregaddr);
writel((phba->ha_copy & ~(HA_LATT | HA_ERATT)), phba->HAregaddr);
+ writel(hc_copy, phba->HCregaddr);
readl(phba->HAregaddr); /* flush */
spin_unlock(&phba->hbalock);
@@ -8351,8 +8361,6 @@
memcpy((char *)pIocbIn + offset, (char *)pIocbOut + offset,
sizeof(struct lpfc_iocbq) - offset);
- memset(&pIocbIn->sli4_info, 0,
- sizeof(struct lpfc_sli4_rspiocb_info));
/* Map WCQE parameters into irspiocb parameters */
pIocbIn->iocb.ulpStatus = bf_get(lpfc_wcqe_c_status, wcqe);
if (pIocbOut->iocb_flag & LPFC_IO_FCP)
@@ -8364,16 +8372,49 @@
pIocbIn->iocb.un.ulpWord[4] = wcqe->parameter;
else
pIocbIn->iocb.un.ulpWord[4] = wcqe->parameter;
- /* Load in additional WCQE parameters */
- pIocbIn->sli4_info.hw_status = bf_get(lpfc_wcqe_c_hw_status, wcqe);
- pIocbIn->sli4_info.bfield = 0;
- if (bf_get(lpfc_wcqe_c_xb, wcqe))
- pIocbIn->sli4_info.bfield |= LPFC_XB;
- if (bf_get(lpfc_wcqe_c_pv, wcqe)) {
- pIocbIn->sli4_info.bfield |= LPFC_PV;
- pIocbIn->sli4_info.priority =
- bf_get(lpfc_wcqe_c_priority, wcqe);
+}
+
+/**
+ * lpfc_sli4_els_wcqe_to_rspiocbq - Get response iocbq from els wcqe
+ * @phba: Pointer to HBA context object.
+ * @wcqe: Pointer to work-queue completion queue entry.
+ *
+ * This routine handles an ELS work-queue completion event and construct
+ * a pseudo response ELS IODBQ from the SLI4 ELS WCQE for the common
+ * discovery engine to handle.
+ *
+ * Return: Pointer to the receive IOCBQ, NULL otherwise.
+ **/
+static struct lpfc_iocbq *
+lpfc_sli4_els_wcqe_to_rspiocbq(struct lpfc_hba *phba,
+ struct lpfc_iocbq *irspiocbq)
+{
+ struct lpfc_sli_ring *pring = &phba->sli.ring[LPFC_ELS_RING];
+ struct lpfc_iocbq *cmdiocbq;
+ struct lpfc_wcqe_complete *wcqe;
+ unsigned long iflags;
+
+ wcqe = &irspiocbq->cq_event.cqe.wcqe_cmpl;
+ spin_lock_irqsave(&phba->hbalock, iflags);
+ pring->stats.iocb_event++;
+ /* Look up the ELS command IOCB and create pseudo response IOCB */
+ cmdiocbq = lpfc_sli_iocbq_lookup_by_tag(phba, pring,
+ bf_get(lpfc_wcqe_c_request_tag, wcqe));
+ spin_unlock_irqrestore(&phba->hbalock, iflags);
+
+ if (unlikely(!cmdiocbq)) {
+ lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+ "0386 ELS complete with no corresponding "
+ "cmdiocb: iotag (%d)\n",
+ bf_get(lpfc_wcqe_c_request_tag, wcqe));
+ lpfc_sli_release_iocbq(phba, irspiocbq);
+ return NULL;
}
+
+ /* Fake the irspiocbq and copy necessary response information */
+ lpfc_sli4_iocb_param_transfer(irspiocbq, cmdiocbq, wcqe);
+
+ return irspiocbq;
}
/**
@@ -8566,45 +8607,26 @@
lpfc_sli4_sp_handle_els_wcqe(struct lpfc_hba *phba,
struct lpfc_wcqe_complete *wcqe)
{
- struct lpfc_sli_ring *pring = &phba->sli.ring[LPFC_ELS_RING];
- struct lpfc_iocbq *cmdiocbq;
struct lpfc_iocbq *irspiocbq;
unsigned long iflags;
- bool workposted = false;
- spin_lock_irqsave(&phba->hbalock, iflags);
- pring->stats.iocb_event++;
- /* Look up the ELS command IOCB and create pseudo response IOCB */
- cmdiocbq = lpfc_sli_iocbq_lookup_by_tag(phba, pring,
- bf_get(lpfc_wcqe_c_request_tag, wcqe));
- spin_unlock_irqrestore(&phba->hbalock, iflags);
-
- if (unlikely(!cmdiocbq)) {
- lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
- "0386 ELS complete with no corresponding "
- "cmdiocb: iotag (%d)\n",
- bf_get(lpfc_wcqe_c_request_tag, wcqe));
- return workposted;
- }
-
- /* Fake the irspiocbq and copy necessary response information */
+ /* Get an irspiocbq for later ELS response processing use */
irspiocbq = lpfc_sli_get_iocbq(phba);
if (!irspiocbq) {
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
"0387 Failed to allocate an iocbq\n");
- return workposted;
+ return false;
}
- lpfc_sli4_iocb_param_transfer(irspiocbq, cmdiocbq, wcqe);
- /* Add the irspiocb to the response IOCB work list */
+ /* Save off the slow-path queue event for work thread to process */
+ memcpy(&irspiocbq->cq_event.cqe.wcqe_cmpl, wcqe, sizeof(*wcqe));
spin_lock_irqsave(&phba->hbalock, iflags);
- list_add_tail(&irspiocbq->list, &phba->sli4_hba.sp_rspiocb_work_queue);
- /* Indicate ELS ring attention */
- phba->work_ha |= (HA_R0ATT << (4*LPFC_ELS_RING));
+ list_add_tail(&irspiocbq->cq_event.list,
+ &phba->sli4_hba.sp_queue_event);
+ phba->hba_flag |= HBA_SP_QUEUE_EVT;
spin_unlock_irqrestore(&phba->hbalock, iflags);
- workposted = true;
- return workposted;
+ return true;
}
/**
@@ -8690,52 +8712,6 @@
}
/**
- * lpfc_sli4_sp_handle_wcqe - Process a work-queue completion queue entry
- * @phba: Pointer to HBA context object.
- * @cq: Pointer to the completion queue.
- * @wcqe: Pointer to a completion queue entry.
- *
- * This routine process a slow-path work-queue completion queue entry.
- *
- * Return: true if work posted to worker thread, otherwise false.
- **/
-static bool
-lpfc_sli4_sp_handle_wcqe(struct lpfc_hba *phba, struct lpfc_queue *cq,
- struct lpfc_cqe *cqe)
-{
- struct lpfc_wcqe_complete wcqe;
- bool workposted = false;
-
- /* Copy the work queue CQE and convert endian order if needed */
- lpfc_sli_pcimem_bcopy(cqe, &wcqe, sizeof(struct lpfc_cqe));
-
- /* Check and process for different type of WCQE and dispatch */
- switch (bf_get(lpfc_wcqe_c_code, &wcqe)) {
- case CQE_CODE_COMPL_WQE:
- /* Process the WQ complete event */
- workposted = lpfc_sli4_sp_handle_els_wcqe(phba,
- (struct lpfc_wcqe_complete *)&wcqe);
- break;
- case CQE_CODE_RELEASE_WQE:
- /* Process the WQ release event */
- lpfc_sli4_sp_handle_rel_wcqe(phba,
- (struct lpfc_wcqe_release *)&wcqe);
- break;
- case CQE_CODE_XRI_ABORTED:
- /* Process the WQ XRI abort event */
- workposted = lpfc_sli4_sp_handle_abort_xri_wcqe(phba, cq,
- (struct sli4_wcqe_xri_aborted *)&wcqe);
- break;
- default:
- lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
- "0388 Not a valid WCQE code: x%x\n",
- bf_get(lpfc_wcqe_c_code, &wcqe));
- break;
- }
- return workposted;
-}
-
-/**
* lpfc_sli4_sp_handle_rcqe - Process a receive-queue completion queue entry
* @phba: Pointer to HBA context object.
* @rcqe: Pointer to receive-queue completion queue entry.
@@ -8745,9 +8721,8 @@
* Return: true if work posted to worker thread, otherwise false.
**/
static bool
-lpfc_sli4_sp_handle_rcqe(struct lpfc_hba *phba, struct lpfc_cqe *cqe)
+lpfc_sli4_sp_handle_rcqe(struct lpfc_hba *phba, struct lpfc_rcqe *rcqe)
{
- struct lpfc_rcqe rcqe;
bool workposted = false;
struct lpfc_queue *hrq = phba->sli4_hba.hdr_rq;
struct lpfc_queue *drq = phba->sli4_hba.dat_rq;
@@ -8755,31 +8730,28 @@
uint32_t status;
unsigned long iflags;
- /* Copy the receive queue CQE and convert endian order if needed */
- lpfc_sli_pcimem_bcopy(cqe, &rcqe, sizeof(struct lpfc_rcqe));
- lpfc_sli4_rq_release(hrq, drq);
- if (bf_get(lpfc_rcqe_code, &rcqe) != CQE_CODE_RECEIVE)
- goto out;
- if (bf_get(lpfc_rcqe_rq_id, &rcqe) != hrq->queue_id)
+ if (bf_get(lpfc_rcqe_rq_id, rcqe) != hrq->queue_id)
goto out;
- status = bf_get(lpfc_rcqe_status, &rcqe);
+ status = bf_get(lpfc_rcqe_status, rcqe);
switch (status) {
case FC_STATUS_RQ_BUF_LEN_EXCEEDED:
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
"2537 Receive Frame Truncated!!\n");
case FC_STATUS_RQ_SUCCESS:
+ lpfc_sli4_rq_release(hrq, drq);
spin_lock_irqsave(&phba->hbalock, iflags);
dma_buf = lpfc_sli_hbqbuf_get(&phba->hbqs[0].hbq_buffer_list);
if (!dma_buf) {
spin_unlock_irqrestore(&phba->hbalock, iflags);
goto out;
}
- memcpy(&dma_buf->rcqe, &rcqe, sizeof(rcqe));
+ memcpy(&dma_buf->cq_event.cqe.rcqe_cmpl, rcqe, sizeof(*rcqe));
/* save off the frame for the word thread to process */
- list_add_tail(&dma_buf->dbuf.list, &phba->rb_pend_list);
+ list_add_tail(&dma_buf->cq_event.list,
+ &phba->sli4_hba.sp_queue_event);
/* Frame received */
- phba->hba_flag |= HBA_RECEIVE_BUFFER;
+ phba->hba_flag |= HBA_SP_QUEUE_EVT;
spin_unlock_irqrestore(&phba->hbalock, iflags);
workposted = true;
break;
@@ -8794,7 +8766,58 @@
}
out:
return workposted;
+}
+/**
+ * lpfc_sli4_sp_handle_cqe - Process a slow path completion queue entry
+ * @phba: Pointer to HBA context object.
+ * @cq: Pointer to the completion queue.
+ * @wcqe: Pointer to a completion queue entry.
+ *
+ * This routine process a slow-path work-queue or recieve queue completion queue
+ * entry.
+ *
+ * Return: true if work posted to worker thread, otherwise false.
+ **/
+static bool
+lpfc_sli4_sp_handle_cqe(struct lpfc_hba *phba, struct lpfc_queue *cq,
+ struct lpfc_cqe *cqe)
+{
+ struct lpfc_cqe cqevt;
+ bool workposted = false;
+
+ /* Copy the work queue CQE and convert endian order if needed */
+ lpfc_sli_pcimem_bcopy(cqe, &cqevt, sizeof(struct lpfc_cqe));
+
+ /* Check and process for different type of WCQE and dispatch */
+ switch (bf_get(lpfc_cqe_code, &cqevt)) {
+ case CQE_CODE_COMPL_WQE:
+ /* Process the WQ/RQ complete event */
+ workposted = lpfc_sli4_sp_handle_els_wcqe(phba,
+ (struct lpfc_wcqe_complete *)&cqevt);
+ break;
+ case CQE_CODE_RELEASE_WQE:
+ /* Process the WQ release event */
+ lpfc_sli4_sp_handle_rel_wcqe(phba,
+ (struct lpfc_wcqe_release *)&cqevt);
+ break;
+ case CQE_CODE_XRI_ABORTED:
+ /* Process the WQ XRI abort event */
+ workposted = lpfc_sli4_sp_handle_abort_xri_wcqe(phba, cq,
+ (struct sli4_wcqe_xri_aborted *)&cqevt);
+ break;
+ case CQE_CODE_RECEIVE:
+ /* Process the RQ event */
+ workposted = lpfc_sli4_sp_handle_rcqe(phba,
+ (struct lpfc_rcqe *)&cqevt);
+ break;
+ default:
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "0388 Not a valid WCQE code: x%x\n",
+ bf_get(lpfc_cqe_code, &cqevt));
+ break;
+ }
+ return workposted;
}
/**
@@ -8858,14 +8881,7 @@
break;
case LPFC_WCQ:
while ((cqe = lpfc_sli4_cq_get(cq))) {
- workposted |= lpfc_sli4_sp_handle_wcqe(phba, cq, cqe);
- if (!(++ecount % LPFC_GET_QE_REL_INT))
- lpfc_sli4_cq_release(cq, LPFC_QUEUE_NOARM);
- }
- break;
- case LPFC_RCQ:
- while ((cqe = lpfc_sli4_cq_get(cq))) {
- workposted |= lpfc_sli4_sp_handle_rcqe(phba, cqe);
+ workposted |= lpfc_sli4_sp_handle_cqe(phba, cq, cqe);
if (!(++ecount % LPFC_GET_QE_REL_INT))
lpfc_sli4_cq_release(cq, LPFC_QUEUE_NOARM);
}
@@ -10427,8 +10443,7 @@
return xritag;
}
spin_unlock_irq(&phba->hbalock);
-
- lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
"2004 Failed to allocate XRI.last XRITAG is %d"
" Max XRI is %d, Used XRI is %d\n",
phba->sli4_hba.next_xri,
@@ -10492,15 +10507,7 @@
lpfc_sli4_mbox_cmd_free(phba, mbox);
return -ENOMEM;
}
-
/* Get the first SGE entry from the non-embedded DMA memory */
- if (unlikely(!mbox->sge_array)) {
- lpfc_printf_log(phba, KERN_ERR, LOG_MBOX,
- "2525 Failed to get the non-embedded SGE "
- "virtual address\n");
- lpfc_sli4_mbox_cmd_free(phba, mbox);
- return -ENOMEM;
- }
viraddr = mbox->sge_array->addr[0];
/* Set up the SGL pages in the non-embedded DMA pages */
@@ -10524,8 +10531,7 @@
sgl_pg_pairs++;
}
bf_set(lpfc_post_sgl_pages_xri, sgl, xritag_start);
- pg_pairs = (pg_pairs > 0) ? (pg_pairs - 1) : pg_pairs;
- bf_set(lpfc_post_sgl_pages_xricnt, sgl, pg_pairs);
+ bf_set(lpfc_post_sgl_pages_xricnt, sgl, els_xri_cnt);
/* Perform endian conversion if necessary */
sgl->word0 = cpu_to_le32(sgl->word0);
@@ -10607,15 +10613,7 @@
lpfc_sli4_mbox_cmd_free(phba, mbox);
return -ENOMEM;
}
-
/* Get the first SGE entry from the non-embedded DMA memory */
- if (unlikely(!mbox->sge_array)) {
- lpfc_printf_log(phba, KERN_ERR, LOG_MBOX,
- "2565 Failed to get the non-embedded SGE "
- "virtual address\n");
- lpfc_sli4_mbox_cmd_free(phba, mbox);
- return -ENOMEM;
- }
viraddr = mbox->sge_array->addr[0];
/* Set up the SGL pages in the non-embedded DMA pages */
@@ -10802,6 +10800,105 @@
}
/**
+ * lpfc_update_rcv_time_stamp - Update vport's rcv seq time stamp
+ * @vport: The vport to work on.
+ *
+ * This function updates the receive sequence time stamp for this vport. The
+ * receive sequence time stamp indicates the time that the last frame of the
+ * the sequence that has been idle for the longest amount of time was received.
+ * the driver uses this time stamp to indicate if any received sequences have
+ * timed out.
+ **/
+void
+lpfc_update_rcv_time_stamp(struct lpfc_vport *vport)
+{
+ struct lpfc_dmabuf *h_buf;
+ struct hbq_dmabuf *dmabuf = NULL;
+
+ /* get the oldest sequence on the rcv list */
+ h_buf = list_get_first(&vport->rcv_buffer_list,
+ struct lpfc_dmabuf, list);
+ if (!h_buf)
+ return;
+ dmabuf = container_of(h_buf, struct hbq_dmabuf, hbuf);
+ vport->rcv_buffer_time_stamp = dmabuf->time_stamp;
+}
+
+/**
+ * lpfc_cleanup_rcv_buffers - Cleans up all outstanding receive sequences.
+ * @vport: The vport that the received sequences were sent to.
+ *
+ * This function cleans up all outstanding received sequences. This is called
+ * by the driver when a link event or user action invalidates all the received
+ * sequences.
+ **/
+void
+lpfc_cleanup_rcv_buffers(struct lpfc_vport *vport)
+{
+ struct lpfc_dmabuf *h_buf, *hnext;
+ struct lpfc_dmabuf *d_buf, *dnext;
+ struct hbq_dmabuf *dmabuf = NULL;
+
+ /* start with the oldest sequence on the rcv list */
+ list_for_each_entry_safe(h_buf, hnext, &vport->rcv_buffer_list, list) {
+ dmabuf = container_of(h_buf, struct hbq_dmabuf, hbuf);
+ list_del_init(&dmabuf->hbuf.list);
+ list_for_each_entry_safe(d_buf, dnext,
+ &dmabuf->dbuf.list, list) {
+ list_del_init(&d_buf->list);
+ lpfc_in_buf_free(vport->phba, d_buf);
+ }
+ lpfc_in_buf_free(vport->phba, &dmabuf->dbuf);
+ }
+}
+
+/**
+ * lpfc_rcv_seq_check_edtov - Cleans up timed out receive sequences.
+ * @vport: The vport that the received sequences were sent to.
+ *
+ * This function determines whether any received sequences have timed out by
+ * first checking the vport's rcv_buffer_time_stamp. If this time_stamp
+ * indicates that there is at least one timed out sequence this routine will
+ * go through the received sequences one at a time from most inactive to most
+ * active to determine which ones need to be cleaned up. Once it has determined
+ * that a sequence needs to be cleaned up it will simply free up the resources
+ * without sending an abort.
+ **/
+void
+lpfc_rcv_seq_check_edtov(struct lpfc_vport *vport)
+{
+ struct lpfc_dmabuf *h_buf, *hnext;
+ struct lpfc_dmabuf *d_buf, *dnext;
+ struct hbq_dmabuf *dmabuf = NULL;
+ unsigned long timeout;
+ int abort_count = 0;
+
+ timeout = (msecs_to_jiffies(vport->phba->fc_edtov) +
+ vport->rcv_buffer_time_stamp);
+ if (list_empty(&vport->rcv_buffer_list) ||
+ time_before(jiffies, timeout))
+ return;
+ /* start with the oldest sequence on the rcv list */
+ list_for_each_entry_safe(h_buf, hnext, &vport->rcv_buffer_list, list) {
+ dmabuf = container_of(h_buf, struct hbq_dmabuf, hbuf);
+ timeout = (msecs_to_jiffies(vport->phba->fc_edtov) +
+ dmabuf->time_stamp);
+ if (time_before(jiffies, timeout))
+ break;
+ abort_count++;
+ list_del_init(&dmabuf->hbuf.list);
+ list_for_each_entry_safe(d_buf, dnext,
+ &dmabuf->dbuf.list, list) {
+ list_del_init(&d_buf->list);
+ lpfc_in_buf_free(vport->phba, d_buf);
+ }
+ lpfc_in_buf_free(vport->phba, &dmabuf->dbuf);
+ }
+ if (abort_count)
+ lpfc_update_rcv_time_stamp(vport);
+}
+
+/**
* lpfc_fc_frame_add - Adds a frame to the vport's list of received sequences
* @dmabuf: pointer to a dmabuf that describes the hdr and data of the FC frame
*
@@ -10823,6 +10920,8 @@
struct hbq_dmabuf *seq_dmabuf = NULL;
struct hbq_dmabuf *temp_dmabuf = NULL;
+ INIT_LIST_HEAD(&dmabuf->dbuf.list);
+ dmabuf->time_stamp = jiffies;
new_hdr = (struct fc_frame_header *)dmabuf->hbuf.virt;
/* Use the hdr_buf to find the sequence that this frame belongs to */
list_for_each_entry(h_buf, &vport->rcv_buffer_list, list) {
@@ -10841,13 +10940,21 @@
* Queue the buffer on the vport's rcv_buffer_list.
*/
list_add_tail(&dmabuf->hbuf.list, &vport->rcv_buffer_list);
+ lpfc_update_rcv_time_stamp(vport);
return dmabuf;
}
temp_hdr = seq_dmabuf->hbuf.virt;
if (new_hdr->fh_seq_cnt < temp_hdr->fh_seq_cnt) {
- list_add(&seq_dmabuf->dbuf.list, &dmabuf->dbuf.list);
+ list_del_init(&seq_dmabuf->hbuf.list);
+ list_add_tail(&dmabuf->hbuf.list, &vport->rcv_buffer_list);
+ list_add_tail(&dmabuf->dbuf.list, &seq_dmabuf->dbuf.list);
+ lpfc_update_rcv_time_stamp(vport);
return dmabuf;
}
+ /* move this sequence to the tail to indicate a young sequence */
+ list_move_tail(&seq_dmabuf->hbuf.list, &vport->rcv_buffer_list);
+ seq_dmabuf->time_stamp = jiffies;
+ lpfc_update_rcv_time_stamp(vport);
/* find the correct place in the sequence to insert this frame */
list_for_each_entry_reverse(d_buf, &seq_dmabuf->dbuf.list, list) {
temp_dmabuf = container_of(d_buf, struct hbq_dmabuf, dbuf);
@@ -10865,6 +10972,210 @@
}
/**
+ * lpfc_sli4_abort_partial_seq - Abort partially assembled unsol sequence
+ * @vport: pointer to a vitural port
+ * @dmabuf: pointer to a dmabuf that describes the FC sequence
+ *
+ * This function tries to abort from the partially assembed sequence, described
+ * by the information from basic abbort @dmabuf. It checks to see whether such
+ * partially assembled sequence held by the driver. If so, it shall free up all
+ * the frames from the partially assembled sequence.
+ *
+ * Return
+ * true -- if there is matching partially assembled sequence present and all
+ * the frames freed with the sequence;
+ * false -- if there is no matching partially assembled sequence present so
+ * nothing got aborted in the lower layer driver
+ **/
+static bool
+lpfc_sli4_abort_partial_seq(struct lpfc_vport *vport,
+ struct hbq_dmabuf *dmabuf)
+{
+ struct fc_frame_header *new_hdr;
+ struct fc_frame_header *temp_hdr;
+ struct lpfc_dmabuf *d_buf, *n_buf, *h_buf;
+ struct hbq_dmabuf *seq_dmabuf = NULL;
+
+ /* Use the hdr_buf to find the sequence that matches this frame */
+ INIT_LIST_HEAD(&dmabuf->dbuf.list);
+ INIT_LIST_HEAD(&dmabuf->hbuf.list);
+ new_hdr = (struct fc_frame_header *)dmabuf->hbuf.virt;
+ list_for_each_entry(h_buf, &vport->rcv_buffer_list, list) {
+ temp_hdr = (struct fc_frame_header *)h_buf->virt;
+ if ((temp_hdr->fh_seq_id != new_hdr->fh_seq_id) ||
+ (temp_hdr->fh_ox_id != new_hdr->fh_ox_id) ||
+ (memcmp(&temp_hdr->fh_s_id, &new_hdr->fh_s_id, 3)))
+ continue;
+ /* found a pending sequence that matches this frame */
+ seq_dmabuf = container_of(h_buf, struct hbq_dmabuf, hbuf);
+ break;
+ }
+
+ /* Free up all the frames from the partially assembled sequence */
+ if (seq_dmabuf) {
+ list_for_each_entry_safe(d_buf, n_buf,
+ &seq_dmabuf->dbuf.list, list) {
+ list_del_init(&d_buf->list);
+ lpfc_in_buf_free(vport->phba, d_buf);
+ }
+ return true;
+ }
+ return false;
+}
+
+/**
+ * lpfc_sli4_seq_abort_acc_cmpl - Accept seq abort iocb complete handler
+ * @phba: Pointer to HBA context object.
+ * @cmd_iocbq: pointer to the command iocbq structure.
+ * @rsp_iocbq: pointer to the response iocbq structure.
+ *
+ * This function handles the sequence abort accept iocb command complete
+ * event. It properly releases the memory allocated to the sequence abort
+ * accept iocb.
+ **/
+static void
+lpfc_sli4_seq_abort_acc_cmpl(struct lpfc_hba *phba,
+ struct lpfc_iocbq *cmd_iocbq,
+ struct lpfc_iocbq *rsp_iocbq)
+{
+ if (cmd_iocbq)
+ lpfc_sli_release_iocbq(phba, cmd_iocbq);
+}
+
+/**
+ * lpfc_sli4_seq_abort_acc - Accept sequence abort
+ * @phba: Pointer to HBA context object.
+ * @fc_hdr: pointer to a FC frame header.
+ *
+ * This function sends a basic accept to a previous unsol sequence abort
+ * event after aborting the sequence handling.
+ **/
+static void
+lpfc_sli4_seq_abort_acc(struct lpfc_hba *phba,
+ struct fc_frame_header *fc_hdr)
+{
+ struct lpfc_iocbq *ctiocb = NULL;
+ struct lpfc_nodelist *ndlp;
+ uint16_t oxid, rxid;
+ uint32_t sid, fctl;
+ IOCB_t *icmd;
+
+ if (!lpfc_is_link_up(phba))
+ return;
+
+ sid = sli4_sid_from_fc_hdr(fc_hdr);
+ oxid = be16_to_cpu(fc_hdr->fh_ox_id);
+ rxid = be16_to_cpu(fc_hdr->fh_rx_id);
+
+ ndlp = lpfc_findnode_did(phba->pport, sid);
+ if (!ndlp) {
+ lpfc_printf_log(phba, KERN_WARNING, LOG_ELS,
+ "1268 Find ndlp returned NULL for oxid:x%x "
+ "SID:x%x\n", oxid, sid);
+ return;
+ }
+
+ /* Allocate buffer for acc iocb */
+ ctiocb = lpfc_sli_get_iocbq(phba);
+ if (!ctiocb)
+ return;
+
+ /* Extract the F_CTL field from FC_HDR */
+ fctl = sli4_fctl_from_fc_hdr(fc_hdr);
+
+ icmd = &ctiocb->iocb;
+ icmd->un.xseq64.bdl.bdeSize = 0;
+ icmd->un.xseq64.bdl.ulpIoTag32 = 0;
+ icmd->un.xseq64.w5.hcsw.Dfctl = 0;
+ icmd->un.xseq64.w5.hcsw.Rctl = FC_RCTL_BA_ACC;
+ icmd->un.xseq64.w5.hcsw.Type = FC_TYPE_BLS;
+
+ /* Fill in the rest of iocb fields */
+ icmd->ulpCommand = CMD_XMIT_BLS_RSP64_CX;
+ icmd->ulpBdeCount = 0;
+ icmd->ulpLe = 1;
+ icmd->ulpClass = CLASS3;
+ icmd->ulpContext = ndlp->nlp_rpi;
+
+ ctiocb->iocb_cmpl = NULL;
+ ctiocb->vport = phba->pport;
+ ctiocb->iocb_cmpl = lpfc_sli4_seq_abort_acc_cmpl;
+
+ if (fctl & FC_FC_EX_CTX) {
+ /* ABTS sent by responder to CT exchange, construction
+ * of BA_ACC will use OX_ID from ABTS for the XRI_TAG
+ * field and RX_ID from ABTS for RX_ID field.
+ */
+ bf_set(lpfc_abts_orig, &icmd->un.bls_acc, LPFC_ABTS_UNSOL_RSP);
+ bf_set(lpfc_abts_rxid, &icmd->un.bls_acc, rxid);
+ ctiocb->sli4_xritag = oxid;
+ } else {
+ /* ABTS sent by initiator to CT exchange, construction
+ * of BA_ACC will need to allocate a new XRI as for the
+ * XRI_TAG and RX_ID fields.
+ */
+ bf_set(lpfc_abts_orig, &icmd->un.bls_acc, LPFC_ABTS_UNSOL_INT);
+ bf_set(lpfc_abts_rxid, &icmd->un.bls_acc, NO_XRI);
+ ctiocb->sli4_xritag = NO_XRI;
+ }
+ bf_set(lpfc_abts_oxid, &icmd->un.bls_acc, oxid);
+
+ /* Xmit CT abts accept on exchange <xid> */
+ lpfc_printf_log(phba, KERN_INFO, LOG_ELS,
+ "1200 Xmit CT ABTS ACC on exchange x%x Data: x%x\n",
+ CMD_XMIT_BLS_RSP64_CX, phba->link_state);
+ lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, ctiocb, 0);
+}
+
+/**
+ * lpfc_sli4_handle_unsol_abort - Handle sli-4 unsolicited abort event
+ * @vport: Pointer to the vport on which this sequence was received
+ * @dmabuf: pointer to a dmabuf that describes the FC sequence
+ *
+ * This function handles an SLI-4 unsolicited abort event. If the unsolicited
+ * receive sequence is only partially assembed by the driver, it shall abort
+ * the partially assembled frames for the sequence. Otherwise, if the
+ * unsolicited receive sequence has been completely assembled and passed to
+ * the Upper Layer Protocol (UPL), it then mark the per oxid status for the
+ * unsolicited sequence has been aborted. After that, it will issue a basic
+ * accept to accept the abort.
+ **/
+void
+lpfc_sli4_handle_unsol_abort(struct lpfc_vport *vport,
+ struct hbq_dmabuf *dmabuf)
+{
+ struct lpfc_hba *phba = vport->phba;
+ struct fc_frame_header fc_hdr;
+ uint32_t fctl;
+ bool abts_par;
+
+ /* Make a copy of fc_hdr before the dmabuf being released */
+ memcpy(&fc_hdr, dmabuf->hbuf.virt, sizeof(struct fc_frame_header));
+ fctl = sli4_fctl_from_fc_hdr(&fc_hdr);
+
+ if (fctl & FC_FC_EX_CTX) {
+ /*
+ * ABTS sent by responder to exchange, just free the buffer
+ */
+ lpfc_in_buf_free(phba, &dmabuf->dbuf);
+ } else {
+ /*
+ * ABTS sent by initiator to exchange, need to do cleanup
+ */
+ /* Try to abort partially assembled seq */
+ abts_par = lpfc_sli4_abort_partial_seq(vport, dmabuf);
+
+ /* Send abort to ULP if partially seq abort failed */
+ if (abts_par == false)
+ lpfc_sli4_send_seq_to_ulp(vport, dmabuf);
+ else
+ lpfc_in_buf_free(phba, &dmabuf->dbuf);
+ }
+ /* Send basic accept (BA_ACC) to the abort requester */
+ lpfc_sli4_seq_abort_acc(phba, &fc_hdr);
+}
+
+/**
* lpfc_seq_complete - Indicates if a sequence is complete
* @dmabuf: pointer to a dmabuf that describes the FC sequence
*
@@ -10935,10 +11246,9 @@
fc_hdr = (struct fc_frame_header *)seq_dmabuf->hbuf.virt;
/* remove from receive buffer list */
list_del_init(&seq_dmabuf->hbuf.list);
+ lpfc_update_rcv_time_stamp(vport);
/* get the Remote Port's SID */
- sid = (fc_hdr->fh_s_id[0] << 16 |
- fc_hdr->fh_s_id[1] << 8 |
- fc_hdr->fh_s_id[2]);
+ sid = sli4_sid_from_fc_hdr(fc_hdr);
/* Get an iocbq struct to fill in. */
first_iocbq = lpfc_sli_get_iocbq(vport->phba);
if (first_iocbq) {
@@ -10957,7 +11267,8 @@
LPFC_DATA_BUF_SIZE;
first_iocbq->iocb.un.rcvels.remoteID = sid;
first_iocbq->iocb.unsli3.rcvsli3.acc_len +=
- bf_get(lpfc_rcqe_length, &seq_dmabuf->rcqe);
+ bf_get(lpfc_rcqe_length,
+ &seq_dmabuf->cq_event.cqe.rcqe_cmpl);
}
iocbq = first_iocbq;
/*
@@ -10975,7 +11286,8 @@
iocbq->iocb.unsli3.rcvsli3.bde2.tus.f.bdeSize =
LPFC_DATA_BUF_SIZE;
first_iocbq->iocb.unsli3.rcvsli3.acc_len +=
- bf_get(lpfc_rcqe_length, &seq_dmabuf->rcqe);
+ bf_get(lpfc_rcqe_length,
+ &seq_dmabuf->cq_event.cqe.rcqe_cmpl);
} else {
iocbq = lpfc_sli_get_iocbq(vport->phba);
if (!iocbq) {
@@ -10994,7 +11306,8 @@
iocbq->iocb.un.cont64[0].tus.f.bdeSize =
LPFC_DATA_BUF_SIZE;
first_iocbq->iocb.unsli3.rcvsli3.acc_len +=
- bf_get(lpfc_rcqe_length, &seq_dmabuf->rcqe);
+ bf_get(lpfc_rcqe_length,
+ &seq_dmabuf->cq_event.cqe.rcqe_cmpl);
iocbq->iocb.un.rcvels.remoteID = sid;
list_add_tail(&iocbq->list, &first_iocbq->list);
}
@@ -11002,6 +11315,43 @@
return first_iocbq;
}
+static void
+lpfc_sli4_send_seq_to_ulp(struct lpfc_vport *vport,
+ struct hbq_dmabuf *seq_dmabuf)
+{
+ struct fc_frame_header *fc_hdr;
+ struct lpfc_iocbq *iocbq, *curr_iocb, *next_iocb;
+ struct lpfc_hba *phba = vport->phba;
+
+ fc_hdr = (struct fc_frame_header *)seq_dmabuf->hbuf.virt;
+ iocbq = lpfc_prep_seq(vport, seq_dmabuf);
+ if (!iocbq) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "2707 Ring %d handler: Failed to allocate "
+ "iocb Rctl x%x Type x%x received\n",
+ LPFC_ELS_RING,
+ fc_hdr->fh_r_ctl, fc_hdr->fh_type);
+ return;
+ }
+ if (!lpfc_complete_unsol_iocb(phba,
+ &phba->sli.ring[LPFC_ELS_RING],
+ iocbq, fc_hdr->fh_r_ctl,
+ fc_hdr->fh_type))
+ lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+ "2540 Ring %d handler: unexpected Rctl "
+ "x%x Type x%x received\n",
+ LPFC_ELS_RING,
+ fc_hdr->fh_r_ctl, fc_hdr->fh_type);
+
+ /* Free iocb created in lpfc_prep_seq */
+ list_for_each_entry_safe(curr_iocb, next_iocb,
+ &iocbq->list, list) {
+ list_del_init(&curr_iocb->list);
+ lpfc_sli_release_iocbq(phba, curr_iocb);
+ }
+ lpfc_sli_release_iocbq(phba, iocbq);
+}
+
/**
* lpfc_sli4_handle_received_buffer - Handle received buffers from firmware
* @phba: Pointer to HBA context object.
@@ -11014,67 +11364,54 @@
* Worker thread calls lpfc_sli4_handle_received_buffer, which will call the
* appropriate receive function when the final frame in a sequence is received.
**/
-int
-lpfc_sli4_handle_received_buffer(struct lpfc_hba *phba)
+void
+lpfc_sli4_handle_received_buffer(struct lpfc_hba *phba,
+ struct hbq_dmabuf *dmabuf)
{
- LIST_HEAD(cmplq);
- struct hbq_dmabuf *dmabuf, *seq_dmabuf;
+ struct hbq_dmabuf *seq_dmabuf;
struct fc_frame_header *fc_hdr;
struct lpfc_vport *vport;
uint32_t fcfi;
- struct lpfc_iocbq *iocbq;
-
- /* Clear hba flag and get all received buffers into the cmplq */
- spin_lock_irq(&phba->hbalock);
- phba->hba_flag &= ~HBA_RECEIVE_BUFFER;
- list_splice_init(&phba->rb_pend_list, &cmplq);
- spin_unlock_irq(&phba->hbalock);
/* Process each received buffer */
- while ((dmabuf = lpfc_sli_hbqbuf_get(&cmplq)) != NULL) {
- fc_hdr = (struct fc_frame_header *)dmabuf->hbuf.virt;
- /* check to see if this a valid type of frame */
- if (lpfc_fc_frame_check(phba, fc_hdr)) {
- lpfc_in_buf_free(phba, &dmabuf->dbuf);
- continue;
- }
- fcfi = bf_get(lpfc_rcqe_fcf_id, &dmabuf->rcqe);
- vport = lpfc_fc_frame_to_vport(phba, fc_hdr, fcfi);
- if (!vport) {
- /* throw out the frame */
- lpfc_in_buf_free(phba, &dmabuf->dbuf);
- continue;
- }
- /* Link this frame */
- seq_dmabuf = lpfc_fc_frame_add(vport, dmabuf);
- if (!seq_dmabuf) {
- /* unable to add frame to vport - throw it out */
- lpfc_in_buf_free(phba, &dmabuf->dbuf);
- continue;
- }
- /* If not last frame in sequence continue processing frames. */
- if (!lpfc_seq_complete(seq_dmabuf)) {
- /*
- * When saving off frames post a new one and mark this
- * frame to be freed when it is finished.
- **/
- lpfc_sli_hbqbuf_fill_hbqs(phba, LPFC_ELS_HBQ, 1);
- dmabuf->tag = -1;
- continue;
- }
- fc_hdr = (struct fc_frame_header *)seq_dmabuf->hbuf.virt;
- iocbq = lpfc_prep_seq(vport, seq_dmabuf);
- if (!lpfc_complete_unsol_iocb(phba,
- &phba->sli.ring[LPFC_ELS_RING],
- iocbq, fc_hdr->fh_r_ctl,
- fc_hdr->fh_type))
- lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
- "2540 Ring %d handler: unexpected Rctl "
- "x%x Type x%x received\n",
- LPFC_ELS_RING,
- fc_hdr->fh_r_ctl, fc_hdr->fh_type);
- };
- return 0;
+ fc_hdr = (struct fc_frame_header *)dmabuf->hbuf.virt;
+ /* check to see if this a valid type of frame */
+ if (lpfc_fc_frame_check(phba, fc_hdr)) {
+ lpfc_in_buf_free(phba, &dmabuf->dbuf);
+ return;
+ }
+ fcfi = bf_get(lpfc_rcqe_fcf_id, &dmabuf->cq_event.cqe.rcqe_cmpl);
+ vport = lpfc_fc_frame_to_vport(phba, fc_hdr, fcfi);
+ if (!vport || !(vport->vpi_state & LPFC_VPI_REGISTERED)) {
+ /* throw out the frame */
+ lpfc_in_buf_free(phba, &dmabuf->dbuf);
+ return;
+ }
+ /* Handle the basic abort sequence (BA_ABTS) event */
+ if (fc_hdr->fh_r_ctl == FC_RCTL_BA_ABTS) {
+ lpfc_sli4_handle_unsol_abort(vport, dmabuf);
+ return;
+ }
+
+ /* Link this frame */
+ seq_dmabuf = lpfc_fc_frame_add(vport, dmabuf);
+ if (!seq_dmabuf) {
+ /* unable to add frame to vport - throw it out */
+ lpfc_in_buf_free(phba, &dmabuf->dbuf);
+ return;
+ }
+ /* If not last frame in sequence continue processing frames. */
+ if (!lpfc_seq_complete(seq_dmabuf)) {
+ /*
+ * When saving off frames post a new one and mark this
+ * frame to be freed when it is finished.
+ **/
+ lpfc_sli_hbqbuf_fill_hbqs(phba, LPFC_ELS_HBQ, 1);
+ dmabuf->tag = -1;
+ return;
+ }
+ /* Send the complete sequence to the upper layer protocol */
+ lpfc_sli4_send_seq_to_ulp(vport, seq_dmabuf);
}
/**
@@ -11091,7 +11428,7 @@
* sequential.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* EIO - The mailbox failed to complete successfully.
* When this error occurs, the driver is not guaranteed
* to have any rpi regions posted to the device and
@@ -11129,7 +11466,7 @@
* maps up to 64 rpi context regions.
*
* Return codes
- * 0 - sucessful
+ * 0 - successful
* ENOMEM - No available memory
* EIO - The mailbox failed to complete successfully.
**/
@@ -11191,7 +11528,7 @@
* PAGE_SIZE modulo 64 rpi context headers.
*
* Returns
- * A nonzero rpi defined as rpi_base <= rpi < max_rpi if sucessful
+ * A nonzero rpi defined as rpi_base <= rpi < max_rpi if successful
* LPFC_RPI_ALLOC_ERROR if no rpis are available.
**/
int
@@ -11334,6 +11671,7 @@
{
LPFC_MBOXQ_t *mboxq;
int rc = 0;
+ int retval = MBX_SUCCESS;
uint32_t mbox_tmo;
if (vpi == 0)
@@ -11344,16 +11682,17 @@
lpfc_init_vpi(phba, mboxq, vpi);
mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_INIT_VPI);
rc = lpfc_sli_issue_mbox_wait(phba, mboxq, mbox_tmo);
- if (rc != MBX_TIMEOUT)
- mempool_free(mboxq, phba->mbox_mem_pool);
if (rc != MBX_SUCCESS) {
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
"2022 INIT VPI Mailbox failed "
"status %d, mbxStatus x%x\n", rc,
bf_get(lpfc_mqe_status, &mboxq->u.mqe));
- rc = -EIO;
+ retval = -EIO;
}
- return rc;
+ if (rc != MBX_TIMEOUT)
+ mempool_free(mboxq, phba->mbox_mem_pool);
+
+ return retval;
}
/**
@@ -11438,13 +11777,6 @@
*/
lpfc_sli4_mbx_sge_get(mboxq, 0, &sge);
phys_addr = getPaddr(sge.pa_hi, sge.pa_lo);
- if (unlikely(!mboxq->sge_array)) {
- lpfc_printf_log(phba, KERN_ERR, LOG_MBOX,
- "2526 Failed to get the non-embedded SGE "
- "virtual address\n");
- lpfc_sli4_mbox_cmd_free(phba, mboxq);
- return -ENOMEM;
- }
virt_addr = mboxq->sge_array->addr[0];
/*
* Configure the FCF record for FCFI 0. This is the driver's
@@ -11542,7 +11874,8 @@
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"2000 Failed to allocate mbox for "
"READ_FCF cmd\n");
- return -ENOMEM;
+ error = -ENOMEM;
+ goto fail_fcfscan;
}
req_len = sizeof(struct fcf_record) +
@@ -11558,8 +11891,8 @@
"0291 Allocated DMA memory size (x%x) is "
"less than the requested DMA memory "
"size (x%x)\n", alloc_len, req_len);
- lpfc_sli4_mbox_cmd_free(phba, mboxq);
- return -ENOMEM;
+ error = -ENOMEM;
+ goto fail_fcfscan;
}
/* Get the first SGE entry from the non-embedded DMA memory. This
@@ -11567,13 +11900,6 @@
*/
lpfc_sli4_mbx_sge_get(mboxq, 0, &sge);
phys_addr = getPaddr(sge.pa_hi, sge.pa_lo);
- if (unlikely(!mboxq->sge_array)) {
- lpfc_printf_log(phba, KERN_ERR, LOG_MBOX,
- "2527 Failed to get the non-embedded SGE "
- "virtual address\n");
- lpfc_sli4_mbox_cmd_free(phba, mboxq);
- return -ENOMEM;
- }
virt_addr = mboxq->sge_array->addr[0];
read_fcf = (struct lpfc_mbx_read_fcf_tbl *)virt_addr;
@@ -11586,7 +11912,6 @@
mboxq->mbox_cmpl = lpfc_mbx_cmpl_read_fcf_record;
rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_NOWAIT);
if (rc == MBX_NOT_FINISHED) {
- lpfc_sli4_mbox_cmd_free(phba, mboxq);
error = -EIO;
} else {
spin_lock_irq(&phba->hbalock);
@@ -11594,6 +11919,15 @@
spin_unlock_irq(&phba->hbalock);
error = 0;
}
+fail_fcfscan:
+ if (error) {
+ if (mboxq)
+ lpfc_sli4_mbox_cmd_free(phba, mboxq);
+ /* FCF scan failed, clear FCF_DISC_INPROGRESS flag */
+ spin_lock_irq(&phba->hbalock);
+ phba->hba_flag &= ~FCF_DISC_INPROGRESS;
+ spin_unlock_irq(&phba->hbalock);
+ }
return error;
}
diff --git a/drivers/scsi/lpfc/lpfc_sli.h b/drivers/scsi/lpfc/lpfc_sli.h
index 3c53316..ba38de3 100644
--- a/drivers/scsi/lpfc/lpfc_sli.h
+++ b/drivers/scsi/lpfc/lpfc_sli.h
@@ -29,14 +29,17 @@
LPFC_CTX_HOST
} lpfc_ctx_cmd;
-/* This structure is used to carry the needed response IOCB states */
-struct lpfc_sli4_rspiocb_info {
- uint8_t hw_status;
- uint8_t bfield;
-#define LPFC_XB 0x1
-#define LPFC_PV 0x2
- uint8_t priority;
- uint8_t reserved;
+struct lpfc_cq_event {
+ struct list_head list;
+ union {
+ struct lpfc_mcqe mcqe_cmpl;
+ struct lpfc_acqe_link acqe_link;
+ struct lpfc_acqe_fcoe acqe_fcoe;
+ struct lpfc_acqe_dcbx acqe_dcbx;
+ struct lpfc_rcqe rcqe_cmpl;
+ struct sli4_wcqe_xri_aborted wcqe_axri;
+ struct lpfc_wcqe_complete wcqe_cmpl;
+ } cqe;
};
/* This structure is used to handle IOCB requests / responses */
@@ -46,6 +49,7 @@
struct list_head clist;
uint16_t iotag; /* pre-assigned IO tag */
uint16_t sli4_xritag; /* pre-assigned XRI, (OXID) tag. */
+ struct lpfc_cq_event cq_event;
IOCB_t iocb; /* IOCB cmd */
uint8_t retry; /* retry counter for IOCB cmd - if needed */
@@ -56,11 +60,13 @@
#define LPFC_DRIVER_ABORTED 8 /* driver aborted this request */
#define LPFC_IO_FABRIC 0x10 /* Iocb send using fabric scheduler */
#define LPFC_DELAY_MEM_FREE 0x20 /* Defer free'ing of FC data */
-#define LPFC_FIP_ELS 0x40
+#define LPFC_FIP_ELS_ID_MASK 0xc0 /* ELS_ID range 0-3 */
+#define LPFC_FIP_ELS_ID_SHIFT 6
uint8_t abort_count;
uint8_t rsvd2;
uint32_t drvrTimeout; /* driver timeout in seconds */
+ uint32_t fcp_wqidx; /* index to FCP work queue */
struct lpfc_vport *vport;/* virtual port pointer */
void *context1; /* caller context information */
void *context2; /* caller context information */
@@ -76,7 +82,6 @@
struct lpfc_iocbq *);
void (*iocb_cmpl) (struct lpfc_hba *, struct lpfc_iocbq *,
struct lpfc_iocbq *);
- struct lpfc_sli4_rspiocb_info sli4_info;
};
#define SLI_IOCB_RET_IOCB 1 /* Return IOCB if cmd ring full */
@@ -110,7 +115,7 @@
return */
#define MBX_NOWAIT 2 /* issue command then return immediately */
-#define LPFC_MAX_RING_MASK 4 /* max num of rctl/type masks allowed per
+#define LPFC_MAX_RING_MASK 5 /* max num of rctl/type masks allowed per
ring */
#define LPFC_MAX_RING 4 /* max num of SLI rings used by driver */
diff --git a/drivers/scsi/lpfc/lpfc_sli4.h b/drivers/scsi/lpfc/lpfc_sli4.h
index b5f4ba1..25d66d0 100644
--- a/drivers/scsi/lpfc/lpfc_sli4.h
+++ b/drivers/scsi/lpfc/lpfc_sli4.h
@@ -58,6 +58,16 @@
#define LPFC_FCOE_FKA_ADV_PER 0
#define LPFC_FCOE_FIP_PRIORITY 0x80
+#define sli4_sid_from_fc_hdr(fc_hdr) \
+ ((fc_hdr)->fh_s_id[0] << 16 | \
+ (fc_hdr)->fh_s_id[1] << 8 | \
+ (fc_hdr)->fh_s_id[2])
+
+#define sli4_fctl_from_fc_hdr(fc_hdr) \
+ ((fc_hdr)->fh_f_ctl[0] << 16 | \
+ (fc_hdr)->fh_f_ctl[1] << 8 | \
+ (fc_hdr)->fh_f_ctl[2])
+
enum lpfc_sli4_queue_type {
LPFC_EQ,
LPFC_GCQ,
@@ -110,18 +120,6 @@
union sli4_qe qe[1]; /* array to index entries (must be last) */
};
-struct lpfc_cq_event {
- struct list_head list;
- union {
- struct lpfc_mcqe mcqe_cmpl;
- struct lpfc_acqe_link acqe_link;
- struct lpfc_acqe_fcoe acqe_fcoe;
- struct lpfc_acqe_dcbx acqe_dcbx;
- struct lpfc_rcqe rcqe_cmpl;
- struct sli4_wcqe_xri_aborted wcqe_axri;
- } cqe;
-};
-
struct lpfc_sli4_link {
uint8_t speed;
uint8_t duplex;
@@ -166,7 +164,7 @@
#define lpfc_fip_param_hdr_fipp_mode_SHIFT 6
#define lpfc_fip_param_hdr_fipp_mode_MASK 0x3
#define lpfc_fip_param_hdr_fipp_mode_WORD parm_flags
-#define FIPP_MODE_ON 0x2
+#define FIPP_MODE_ON 0x1
#define FIPP_MODE_OFF 0x0
#define FIPP_VLAN_VALID 0x1
};
@@ -295,9 +293,8 @@
/* BAR0 PCI config space register memory map */
void __iomem *UERRLOregaddr; /* Address to UERR_STATUS_LO register */
void __iomem *UERRHIregaddr; /* Address to UERR_STATUS_HI register */
- void __iomem *ONLINE0regaddr; /* Address to components of internal UE */
- void __iomem *ONLINE1regaddr; /* Address to components of internal UE */
-#define LPFC_ONLINE_NERR 0xFFFFFFFF
+ void __iomem *UEMASKLOregaddr; /* Address to UE_MASK_LO register */
+ void __iomem *UEMASKHIregaddr; /* Address to UE_MASK_HI register */
void __iomem *SCRATCHPADregaddr; /* Address to scratchpad register */
/* BAR1 FCoE function CSR register memory map */
void __iomem *STAregaddr; /* Address to HST_STATE register */
@@ -311,6 +308,8 @@
void __iomem *MQDBregaddr; /* Address to MQ_DOORBELL register */
void __iomem *BMBXregaddr; /* Address to BootStrap MBX register */
+ uint32_t ue_mask_lo;
+ uint32_t ue_mask_hi;
struct msix_entry *msix_entries;
uint32_t cfg_eqn;
struct lpfc_fcp_eq_hdl *fcp_eq_hdl; /* FCP per-WQ handle */
@@ -325,7 +324,6 @@
struct lpfc_queue **fcp_cq;/* Fast-path FCP compl queue */
struct lpfc_queue *mbx_cq; /* Slow-path mailbox complete queue */
struct lpfc_queue *els_cq; /* Slow-path ELS response complete queue */
- struct lpfc_queue *rxq_cq; /* Slow-path unsolicited complete queue */
/* Setup information for various queue parameters */
int eq_esize;
@@ -360,7 +358,7 @@
unsigned long *rpi_bmask;
uint16_t rpi_count;
struct lpfc_sli4_flags sli4_flags;
- struct list_head sp_rspiocb_work_queue;
+ struct list_head sp_queue_event;
struct list_head sp_cqe_event_pool;
struct list_head sp_asynce_work_queue;
struct list_head sp_fcp_xri_aborted_work_queue;
diff --git a/drivers/scsi/lpfc/lpfc_version.h b/drivers/scsi/lpfc/lpfc_version.h
index 9ae20af..c7f3aed 100644
--- a/drivers/scsi/lpfc/lpfc_version.h
+++ b/drivers/scsi/lpfc/lpfc_version.h
@@ -18,8 +18,7 @@
* included with this package. *
*******************************************************************/
-#define LPFC_DRIVER_VERSION "8.3.4"
-
+#define LPFC_DRIVER_VERSION "8.3.6"
#define LPFC_DRIVER_NAME "lpfc"
#define LPFC_SP_DRIVER_HANDLER_NAME "lpfc:sp"
#define LPFC_FP_DRIVER_HANDLER_NAME "lpfc:fp"
diff --git a/drivers/scsi/lpfc/lpfc_vport.c b/drivers/scsi/lpfc/lpfc_vport.c
index 606efa7..7d6dd83 100644
--- a/drivers/scsi/lpfc/lpfc_vport.c
+++ b/drivers/scsi/lpfc/lpfc_vport.c
@@ -389,7 +389,7 @@
* by the port.
*/
if ((phba->sli_rev == LPFC_SLI_REV4) &&
- (pport->vfi_state & LPFC_VFI_REGISTERED)) {
+ (pport->vpi_state & LPFC_VPI_REGISTERED)) {
rc = lpfc_sli4_init_vpi(phba, vpi);
if (rc) {
lpfc_printf_log(phba, KERN_ERR, LOG_VPORT,
@@ -700,6 +700,8 @@
}
spin_unlock_irq(&phba->ndlp_lock);
}
+ if (vport->vpi_state != LPFC_VPI_REGISTERED)
+ goto skip_logo;
vport->unreg_vpi_cmpl = VPORT_INVAL;
timeout = msecs_to_jiffies(phba->fc_ratov * 2000);
if (!lpfc_issue_els_npiv_logo(vport, ndlp))
diff --git a/drivers/scsi/megaraid.h b/drivers/scsi/megaraid.h
index 512c2cc..d310f49 100644
--- a/drivers/scsi/megaraid.h
+++ b/drivers/scsi/megaraid.h
@@ -381,7 +381,7 @@
u8 battery_status; /*
* BIT 0: battery module missing
* BIT 1: VBAD
- * BIT 2: temprature high
+ * BIT 2: temperature high
* BIT 3: battery pack missing
* BIT 4,5:
* 00 - charge complete
diff --git a/drivers/scsi/megaraid/mbox_defs.h b/drivers/scsi/megaraid/mbox_defs.h
index b25b747..ce2487a 100644
--- a/drivers/scsi/megaraid/mbox_defs.h
+++ b/drivers/scsi/megaraid/mbox_defs.h
@@ -497,7 +497,7 @@
* @inserted_drive : channel:Id of inserted drive
* @battery_status : bit 0: battery module missing
* bit 1: VBAD
- * bit 2: temprature high
+ * bit 2: temperature high
* bit 3: battery pack missing
* bit 4,5:
* 00 - charge complete
diff --git a/drivers/scsi/megaraid/megaraid_mbox.c b/drivers/scsi/megaraid/megaraid_mbox.c
index 234f0b7..7f97796 100644
--- a/drivers/scsi/megaraid/megaraid_mbox.c
+++ b/drivers/scsi/megaraid/megaraid_mbox.c
@@ -335,12 +335,17 @@
* megaraid_change_queue_depth - Change the device's queue depth
* @sdev: scsi device struct
* @qdepth: depth to set
+ * @reason: calling context
*
* Return value:
* actual depth set
*/
-static int megaraid_change_queue_depth(struct scsi_device *sdev, int qdepth)
+static int megaraid_change_queue_depth(struct scsi_device *sdev, int qdepth,
+ int reason)
{
+ if (reason != SCSI_QDEPTH_DEFAULT)
+ return -EOPNOTSUPP;
+
if (qdepth > MBOX_MAX_SCSI_CMDS)
qdepth = MBOX_MAX_SCSI_CMDS;
scsi_adjust_queue_depth(sdev, 0, qdepth);
@@ -2704,7 +2709,7 @@
}
else {
con_log(CL_ANN, (KERN_NOTICE
- "megaraid mbox: reset sequence completed sucessfully\n"));
+ "megaraid mbox: reset sequence completed successfully\n"));
}
diff --git a/drivers/scsi/megaraid/megaraid_sas.c b/drivers/scsi/megaraid/megaraid_sas.c
index a39addc..134c63e 100644
--- a/drivers/scsi/megaraid/megaraid_sas.c
+++ b/drivers/scsi/megaraid/megaraid_sas.c
@@ -10,7 +10,7 @@
* 2 of the License, or (at your option) any later version.
*
* FILE : megaraid_sas.c
- * Version : v00.00.04.01-rc1
+ * Version : v00.00.04.12-rc1
*
* Authors:
* (email-id : megaraidlinux@lsi.com)
@@ -40,6 +40,7 @@
#include <linux/compat.h>
#include <linux/blkdev.h>
#include <linux/mutex.h>
+#include <linux/poll.h>
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
@@ -75,6 +76,10 @@
/* gen2*/
{PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_SAS0079GEN2)},
/* gen2*/
+ {PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_SAS0073SKINNY)},
+ /* skinny*/
+ {PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_SAS0071SKINNY)},
+ /* skinny*/
{PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_VERDE_ZCR)},
/* xscale IOP, vega */
{PCI_DEVICE(PCI_VENDOR_ID_DELL, PCI_DEVICE_ID_DELL_PERC5)},
@@ -89,8 +94,14 @@
static struct fasync_struct *megasas_async_queue;
static DEFINE_MUTEX(megasas_async_queue_mutex);
+static int megasas_poll_wait_aen;
+static DECLARE_WAIT_QUEUE_HEAD(megasas_poll_wait);
+static u32 support_poll_for_event;
static u32 megasas_dbg_lvl;
+/* define lock for aen poll */
+spinlock_t poll_aen_lock;
+
static void
megasas_complete_cmd(struct megasas_instance *instance, struct megasas_cmd *cmd,
u8 alt_status);
@@ -215,7 +226,10 @@
* @regs : MFI register set
*/
static inline void
-megasas_fire_cmd_xscale(dma_addr_t frame_phys_addr,u32 frame_count, struct megasas_register_set __iomem *regs)
+megasas_fire_cmd_xscale(struct megasas_instance *instance,
+ dma_addr_t frame_phys_addr,
+ u32 frame_count,
+ struct megasas_register_set __iomem *regs)
{
writel((frame_phys_addr >> 3)|(frame_count),
&(regs)->inbound_queue_port);
@@ -312,7 +326,10 @@
* @regs : MFI register set
*/
static inline void
-megasas_fire_cmd_ppc(dma_addr_t frame_phys_addr, u32 frame_count, struct megasas_register_set __iomem *regs)
+megasas_fire_cmd_ppc(struct megasas_instance *instance,
+ dma_addr_t frame_phys_addr,
+ u32 frame_count,
+ struct megasas_register_set __iomem *regs)
{
writel((frame_phys_addr | (frame_count<<1))|1,
&(regs)->inbound_queue_port);
@@ -328,6 +345,104 @@
};
/**
+ * megasas_enable_intr_skinny - Enables interrupts
+ * @regs: MFI register set
+ */
+static inline void
+megasas_enable_intr_skinny(struct megasas_register_set __iomem *regs)
+{
+ writel(0xFFFFFFFF, &(regs)->outbound_intr_mask);
+
+ writel(~MFI_SKINNY_ENABLE_INTERRUPT_MASK, &(regs)->outbound_intr_mask);
+
+ /* Dummy readl to force pci flush */
+ readl(®s->outbound_intr_mask);
+}
+
+/**
+ * megasas_disable_intr_skinny - Disables interrupt
+ * @regs: MFI register set
+ */
+static inline void
+megasas_disable_intr_skinny(struct megasas_register_set __iomem *regs)
+{
+ u32 mask = 0xFFFFFFFF;
+ writel(mask, ®s->outbound_intr_mask);
+ /* Dummy readl to force pci flush */
+ readl(®s->outbound_intr_mask);
+}
+
+/**
+ * megasas_read_fw_status_reg_skinny - returns the current FW status value
+ * @regs: MFI register set
+ */
+static u32
+megasas_read_fw_status_reg_skinny(struct megasas_register_set __iomem *regs)
+{
+ return readl(&(regs)->outbound_scratch_pad);
+}
+
+/**
+ * megasas_clear_interrupt_skinny - Check & clear interrupt
+ * @regs: MFI register set
+ */
+static int
+megasas_clear_intr_skinny(struct megasas_register_set __iomem *regs)
+{
+ u32 status;
+ /*
+ * Check if it is our interrupt
+ */
+ status = readl(®s->outbound_intr_status);
+
+ if (!(status & MFI_SKINNY_ENABLE_INTERRUPT_MASK)) {
+ return 1;
+ }
+
+ /*
+ * Clear the interrupt by writing back the same value
+ */
+ writel(status, ®s->outbound_intr_status);
+
+ /*
+ * dummy read to flush PCI
+ */
+ readl(®s->outbound_intr_status);
+
+ return 0;
+}
+
+/**
+ * megasas_fire_cmd_skinny - Sends command to the FW
+ * @frame_phys_addr : Physical address of cmd
+ * @frame_count : Number of frames for the command
+ * @regs : MFI register set
+ */
+static inline void
+megasas_fire_cmd_skinny(struct megasas_instance *instance,
+ dma_addr_t frame_phys_addr,
+ u32 frame_count,
+ struct megasas_register_set __iomem *regs)
+{
+ unsigned long flags;
+ spin_lock_irqsave(&instance->fire_lock, flags);
+ writel(0, &(regs)->inbound_high_queue_port);
+ writel((frame_phys_addr | (frame_count<<1))|1,
+ &(regs)->inbound_low_queue_port);
+ spin_unlock_irqrestore(&instance->fire_lock, flags);
+}
+
+static struct megasas_instance_template megasas_instance_template_skinny = {
+
+ .fire_cmd = megasas_fire_cmd_skinny,
+ .enable_intr = megasas_enable_intr_skinny,
+ .disable_intr = megasas_disable_intr_skinny,
+ .clear_intr = megasas_clear_intr_skinny,
+ .read_fw_status_reg = megasas_read_fw_status_reg_skinny,
+};
+
+
+/**
* The following functions are defined for gen2 (deviceid : 0x78 0x79)
* controllers
*/
@@ -404,7 +519,9 @@
* @regs : MFI register set
*/
static inline void
-megasas_fire_cmd_gen2(dma_addr_t frame_phys_addr, u32 frame_count,
+megasas_fire_cmd_gen2(struct megasas_instance *instance,
+ dma_addr_t frame_phys_addr,
+ u32 frame_count,
struct megasas_register_set __iomem *regs)
{
writel((frame_phys_addr | (frame_count<<1))|1,
@@ -446,7 +563,8 @@
/*
* Issue the frame using inbound queue port
*/
- instance->instancet->fire_cmd(cmd->frame_phys_addr ,0,instance->reg_set);
+ instance->instancet->fire_cmd(instance,
+ cmd->frame_phys_addr, 0, instance->reg_set);
/*
* Wait for cmd_status to change
@@ -477,7 +595,8 @@
{
cmd->cmd_status = ENODATA;
- instance->instancet->fire_cmd(cmd->frame_phys_addr ,0,instance->reg_set);
+ instance->instancet->fire_cmd(instance,
+ cmd->frame_phys_addr, 0, instance->reg_set);
wait_event_timeout(instance->int_cmd_wait_q, (cmd->cmd_status != ENODATA),
MEGASAS_INTERNAL_CMD_WAIT_TIME*HZ);
@@ -522,7 +641,8 @@
cmd->sync_cmd = 1;
cmd->cmd_status = 0xFF;
- instance->instancet->fire_cmd(cmd->frame_phys_addr ,0,instance->reg_set);
+ instance->instancet->fire_cmd(instance,
+ cmd->frame_phys_addr, 0, instance->reg_set);
/*
* Wait for this cmd to complete
@@ -592,6 +712,35 @@
return sge_count;
}
+/**
+ * megasas_make_sgl_skinny - Prepares IEEE SGL
+ * @instance: Adapter soft state
+ * @scp: SCSI command from the mid-layer
+ * @mfi_sgl: SGL to be filled in
+ *
+ * If successful, this function returns the number of SG elements. Otherwise,
+ * it returnes -1.
+ */
+static int
+megasas_make_sgl_skinny(struct megasas_instance *instance,
+ struct scsi_cmnd *scp, union megasas_sgl *mfi_sgl)
+{
+ int i;
+ int sge_count;
+ struct scatterlist *os_sgl;
+
+ sge_count = scsi_dma_map(scp);
+
+ if (sge_count) {
+ scsi_for_each_sg(scp, os_sgl, sge_count, i) {
+ mfi_sgl->sge_skinny[i].length = sg_dma_len(os_sgl);
+ mfi_sgl->sge_skinny[i].phys_addr =
+ sg_dma_address(os_sgl);
+ }
+ }
+ return sge_count;
+}
+
/**
* megasas_get_frame_count - Computes the number of frames
* @frame_type : type of frame- io or pthru frame
@@ -600,7 +749,8 @@
* Returns the number of frames required for numnber of sge's (sge_count)
*/
-static u32 megasas_get_frame_count(u8 sge_count, u8 frame_type)
+static u32 megasas_get_frame_count(struct megasas_instance *instance,
+ u8 sge_count, u8 frame_type)
{
int num_cnt;
int sge_bytes;
@@ -610,6 +760,10 @@
sge_sz = (IS_DMA64) ? sizeof(struct megasas_sge64) :
sizeof(struct megasas_sge32);
+ if (instance->flag_ieee) {
+ sge_sz = sizeof(struct megasas_sge_skinny);
+ }
+
/*
* Main frame can contain 2 SGEs for 64-bit SGLs and
* 3 SGEs for 32-bit SGLs for ldio &
@@ -617,12 +771,16 @@
* 2 SGEs for 32-bit SGLs for pthru frame
*/
if (unlikely(frame_type == PTHRU_FRAME)) {
- if (IS_DMA64)
+ if (instance->flag_ieee == 1) {
+ num_cnt = sge_count - 1;
+ } else if (IS_DMA64)
num_cnt = sge_count - 1;
else
num_cnt = sge_count - 2;
} else {
- if (IS_DMA64)
+ if (instance->flag_ieee == 1) {
+ num_cnt = sge_count - 1;
+ } else if (IS_DMA64)
num_cnt = sge_count - 2;
else
num_cnt = sge_count - 3;
@@ -671,6 +829,10 @@
else if (scp->sc_data_direction == PCI_DMA_NONE)
flags = MFI_FRAME_DIR_NONE;
+ if (instance->flag_ieee == 1) {
+ flags |= MFI_FRAME_IEEE;
+ }
+
/*
* Prepare the DCDB frame
*/
@@ -687,9 +849,24 @@
memcpy(pthru->cdb, scp->cmnd, scp->cmd_len);
/*
+ * If the command is for the tape device, set the
+ * pthru timeout to the os layer timeout value.
+ */
+ if (scp->device->type == TYPE_TAPE) {
+ if ((scp->request->timeout / HZ) > 0xFFFF)
+ pthru->timeout = 0xFFFF;
+ else
+ pthru->timeout = scp->request->timeout / HZ;
+ }
+
+ /*
* Construct SGL
*/
- if (IS_DMA64) {
+ if (instance->flag_ieee == 1) {
+ pthru->flags |= MFI_FRAME_SGL64;
+ pthru->sge_count = megasas_make_sgl_skinny(instance, scp,
+ &pthru->sgl);
+ } else if (IS_DMA64) {
pthru->flags |= MFI_FRAME_SGL64;
pthru->sge_count = megasas_make_sgl64(instance, scp,
&pthru->sgl);
@@ -708,7 +885,7 @@
* Compute the total number of frames this command consumes. FW uses
* this number to pull sufficient number of frames from host memory.
*/
- cmd->frame_count = megasas_get_frame_count(pthru->sge_count,
+ cmd->frame_count = megasas_get_frame_count(instance, pthru->sge_count,
PTHRU_FRAME);
return cmd->frame_count;
@@ -739,6 +916,10 @@
else if (scp->sc_data_direction == PCI_DMA_FROMDEVICE)
flags = MFI_FRAME_DIR_READ;
+ if (instance->flag_ieee == 1) {
+ flags |= MFI_FRAME_IEEE;
+ }
+
/*
* Prepare the Logical IO frame: 2nd bit is zero for all read cmds
*/
@@ -809,7 +990,11 @@
/*
* Construct SGL
*/
- if (IS_DMA64) {
+ if (instance->flag_ieee) {
+ ldio->flags |= MFI_FRAME_SGL64;
+ ldio->sge_count = megasas_make_sgl_skinny(instance, scp,
+ &ldio->sgl);
+ } else if (IS_DMA64) {
ldio->flags |= MFI_FRAME_SGL64;
ldio->sge_count = megasas_make_sgl64(instance, scp, &ldio->sgl);
} else
@@ -826,7 +1011,8 @@
* Compute the total number of frames this command consumes. FW uses
* this number to pull sufficient number of frames from host memory.
*/
- cmd->frame_count = megasas_get_frame_count(ldio->sge_count, IO_FRAME);
+ cmd->frame_count = megasas_get_frame_count(instance,
+ ldio->sge_count, IO_FRAME);
return cmd->frame_count;
}
@@ -983,7 +1169,8 @@
*/
atomic_inc(&instance->fw_outstanding);
- instance->instancet->fire_cmd(cmd->frame_phys_addr ,cmd->frame_count-1,instance->reg_set);
+ instance->instancet->fire_cmd(instance, cmd->frame_phys_addr,
+ cmd->frame_count-1, instance->reg_set);
/*
* Check if we have pend cmds to be completed
*/
@@ -1000,24 +1187,76 @@
return 0;
}
+static struct megasas_instance *megasas_lookup_instance(u16 host_no)
+{
+ int i;
+
+ for (i = 0; i < megasas_mgmt_info.max_index; i++) {
+
+ if ((megasas_mgmt_info.instance[i]) &&
+ (megasas_mgmt_info.instance[i]->host->host_no == host_no))
+ return megasas_mgmt_info.instance[i];
+ }
+
+ return NULL;
+}
+
static int megasas_slave_configure(struct scsi_device *sdev)
{
- /*
- * Don't export physical disk devices to the disk driver.
- *
- * FIXME: Currently we don't export them to the midlayer at all.
- * That will be fixed once LSI engineers have audited the
- * firmware for possible issues.
- */
- if (sdev->channel < MEGASAS_MAX_PD_CHANNELS && sdev->type == TYPE_DISK)
- return -ENXIO;
+ u16 pd_index = 0;
+ struct megasas_instance *instance ;
+
+ instance = megasas_lookup_instance(sdev->host->host_no);
/*
- * The RAID firmware may require extended timeouts.
- */
- if (sdev->channel >= MEGASAS_MAX_PD_CHANNELS)
- blk_queue_rq_timeout(sdev->request_queue,
- MEGASAS_DEFAULT_CMD_TIMEOUT * HZ);
+ * Don't export physical disk devices to the disk driver.
+ *
+ * FIXME: Currently we don't export them to the midlayer at all.
+ * That will be fixed once LSI engineers have audited the
+ * firmware for possible issues.
+ */
+ if (sdev->channel < MEGASAS_MAX_PD_CHANNELS &&
+ sdev->type == TYPE_DISK) {
+ pd_index = (sdev->channel * MEGASAS_MAX_DEV_PER_CHANNEL) +
+ sdev->id;
+ if (instance->pd_list[pd_index].driveState ==
+ MR_PD_STATE_SYSTEM) {
+ blk_queue_rq_timeout(sdev->request_queue,
+ MEGASAS_DEFAULT_CMD_TIMEOUT * HZ);
+ return 0;
+ }
+ return -ENXIO;
+ }
+
+ /*
+ * The RAID firmware may require extended timeouts.
+ */
+ blk_queue_rq_timeout(sdev->request_queue,
+ MEGASAS_DEFAULT_CMD_TIMEOUT * HZ);
+ return 0;
+}
+
+static int megasas_slave_alloc(struct scsi_device *sdev)
+{
+ u16 pd_index = 0;
+ struct megasas_instance *instance ;
+ instance = megasas_lookup_instance(sdev->host->host_no);
+ if ((sdev->channel < MEGASAS_MAX_PD_CHANNELS) &&
+ (sdev->type == TYPE_DISK)) {
+ /*
+ * Open the OS scan to the SYSTEM PD
+ */
+ pd_index =
+ (sdev->channel * MEGASAS_MAX_DEV_PER_CHANNEL) +
+ sdev->id;
+ if ((instance->pd_list[pd_index].driveState ==
+ MR_PD_STATE_SYSTEM) &&
+ (instance->pd_list[pd_index].driveType ==
+ TYPE_DISK)) {
+ return 0;
+ }
+ return -ENXIO;
+ }
return 0;
}
@@ -1072,7 +1311,14 @@
spin_lock_irqsave(instance->host->host_lock, flags);
instance->flag &= ~MEGASAS_FW_BUSY;
- instance->host->can_queue =
+ if ((instance->pdev->device ==
+ PCI_DEVICE_ID_LSI_SAS0073SKINNY) ||
+ (instance->pdev->device ==
+ PCI_DEVICE_ID_LSI_SAS0071SKINNY)) {
+ instance->host->can_queue =
+ instance->max_fw_cmds - MEGASAS_SKINNY_INT_CMDS;
+ } else
+ instance->host->can_queue =
instance->max_fw_cmds - MEGASAS_INT_CMDS;
spin_unlock_irqrestore(instance->host->host_lock, flags);
@@ -1117,8 +1363,16 @@
* Send signal to FW to stop processing any pending cmds.
* The controller will be taken offline by the OS now.
*/
- writel(MFI_STOP_ADP,
+ if ((instance->pdev->device ==
+ PCI_DEVICE_ID_LSI_SAS0073SKINNY) ||
+ (instance->pdev->device ==
+ PCI_DEVICE_ID_LSI_SAS0071SKINNY)) {
+ writel(MFI_STOP_ADP,
+ &instance->reg_set->reserved_0[0]);
+ } else {
+ writel(MFI_STOP_ADP,
&instance->reg_set->inbound_doorbell);
+ }
megasas_dump_pending_frames(instance);
instance->hw_crit_error = 1;
return FAILED;
@@ -1266,6 +1520,8 @@
return 0;
}
+static void megasas_aen_polling(struct work_struct *work);
+
/**
* megasas_service_aen - Processes an event notification
* @instance: Adapter soft state
@@ -1281,16 +1537,36 @@
static void
megasas_service_aen(struct megasas_instance *instance, struct megasas_cmd *cmd)
{
+ unsigned long flags;
/*
* Don't signal app if it is just an aborted previously registered aen
*/
- if (!cmd->abort_aen)
+ if ((!cmd->abort_aen) && (instance->unload == 0)) {
+ spin_lock_irqsave(&poll_aen_lock, flags);
+ megasas_poll_wait_aen = 1;
+ spin_unlock_irqrestore(&poll_aen_lock, flags);
+ wake_up(&megasas_poll_wait);
kill_fasync(&megasas_async_queue, SIGIO, POLL_IN);
+ }
else
cmd->abort_aen = 0;
instance->aen_cmd = NULL;
megasas_return_cmd(instance, cmd);
+
+ if (instance->unload == 0) {
+ struct megasas_aen_event *ev;
+ ev = kzalloc(sizeof(*ev), GFP_ATOMIC);
+ if (!ev) {
+ printk(KERN_ERR "megasas_service_aen: out of memory\n");
+ } else {
+ ev->instance = instance;
+ instance->ev = ev;
+ INIT_WORK(&ev->hotplug_work, megasas_aen_polling);
+ schedule_delayed_work(
+ (struct delayed_work *)&ev->hotplug_work, 0);
+ }
+ }
}
/*
@@ -1302,6 +1578,7 @@
.name = "LSI SAS based MegaRAID driver",
.proc_name = "megaraid_sas",
.slave_configure = megasas_slave_configure,
+ .slave_alloc = megasas_slave_alloc,
.queuecommand = megasas_queue_command,
.eh_device_reset_handler = megasas_reset_device,
.eh_bus_reset_handler = megasas_reset_bus_host,
@@ -1370,6 +1647,7 @@
{
int exception = 0;
struct megasas_header *hdr = &cmd->frame->hdr;
+ unsigned long flags;
if (cmd->scmd)
cmd->scmd->SCp.ptr = NULL;
@@ -1459,6 +1737,12 @@
case MFI_CMD_SMP:
case MFI_CMD_STP:
case MFI_CMD_DCMD:
+ if (cmd->frame->dcmd.opcode == MR_DCMD_CTRL_EVENT_GET_INFO ||
+ cmd->frame->dcmd.opcode == MR_DCMD_CTRL_EVENT_GET) {
+ spin_lock_irqsave(&poll_aen_lock, flags);
+ megasas_poll_wait_aen = 0;
+ spin_unlock_irqrestore(&poll_aen_lock, flags);
+ }
/*
* See if got an event notification
@@ -1536,6 +1820,7 @@
u8 max_wait;
u32 fw_state;
u32 cur_state;
+ u32 abs_state, curr_abs_state;
fw_state = instance->instancet->read_fw_status_reg(instance->reg_set) & MFI_STATE_MASK;
@@ -1545,6 +1830,9 @@
while (fw_state != MFI_STATE_READY) {
+ abs_state =
+ instance->instancet->read_fw_status_reg(instance->reg_set);
+
switch (fw_state) {
case MFI_STATE_FAULT:
@@ -1556,18 +1844,36 @@
/*
* Set the CLR bit in inbound doorbell
*/
- writel(MFI_INIT_CLEAR_HANDSHAKE|MFI_INIT_HOTPLUG,
- &instance->reg_set->inbound_doorbell);
+ if ((instance->pdev->device ==
+ PCI_DEVICE_ID_LSI_SAS0073SKINNY) ||
+ (instance->pdev->device ==
+ PCI_DEVICE_ID_LSI_SAS0071SKINNY)) {
- max_wait = 2;
+ writel(
+ MFI_INIT_CLEAR_HANDSHAKE|MFI_INIT_HOTPLUG,
+ &instance->reg_set->reserved_0[0]);
+ } else {
+ writel(
+ MFI_INIT_CLEAR_HANDSHAKE|MFI_INIT_HOTPLUG,
+ &instance->reg_set->inbound_doorbell);
+ }
+
+ max_wait = MEGASAS_RESET_WAIT_TIME;
cur_state = MFI_STATE_WAIT_HANDSHAKE;
break;
case MFI_STATE_BOOT_MESSAGE_PENDING:
- writel(MFI_INIT_HOTPLUG,
- &instance->reg_set->inbound_doorbell);
+ if ((instance->pdev->device ==
+ PCI_DEVICE_ID_LSI_SAS0073SKINNY) ||
+ (instance->pdev->device ==
+ PCI_DEVICE_ID_LSI_SAS0071SKINNY)) {
+ writel(MFI_INIT_HOTPLUG,
+ &instance->reg_set->reserved_0[0]);
+ } else
+ writel(MFI_INIT_HOTPLUG,
+ &instance->reg_set->inbound_doorbell);
- max_wait = 10;
+ max_wait = MEGASAS_RESET_WAIT_TIME;
cur_state = MFI_STATE_BOOT_MESSAGE_PENDING;
break;
@@ -1576,9 +1882,17 @@
* Bring it to READY state; assuming max wait 10 secs
*/
instance->instancet->disable_intr(instance->reg_set);
- writel(MFI_RESET_FLAGS, &instance->reg_set->inbound_doorbell);
+ if ((instance->pdev->device ==
+ PCI_DEVICE_ID_LSI_SAS0073SKINNY) ||
+ (instance->pdev->device ==
+ PCI_DEVICE_ID_LSI_SAS0071SKINNY)) {
+ writel(MFI_RESET_FLAGS,
+ &instance->reg_set->reserved_0[0]);
+ } else
+ writel(MFI_RESET_FLAGS,
+ &instance->reg_set->inbound_doorbell);
- max_wait = 60;
+ max_wait = MEGASAS_RESET_WAIT_TIME;
cur_state = MFI_STATE_OPERATIONAL;
break;
@@ -1586,32 +1900,32 @@
/*
* This state should not last for more than 2 seconds
*/
- max_wait = 2;
+ max_wait = MEGASAS_RESET_WAIT_TIME;
cur_state = MFI_STATE_UNDEFINED;
break;
case MFI_STATE_BB_INIT:
- max_wait = 2;
+ max_wait = MEGASAS_RESET_WAIT_TIME;
cur_state = MFI_STATE_BB_INIT;
break;
case MFI_STATE_FW_INIT:
- max_wait = 20;
+ max_wait = MEGASAS_RESET_WAIT_TIME;
cur_state = MFI_STATE_FW_INIT;
break;
case MFI_STATE_FW_INIT_2:
- max_wait = 20;
+ max_wait = MEGASAS_RESET_WAIT_TIME;
cur_state = MFI_STATE_FW_INIT_2;
break;
case MFI_STATE_DEVICE_SCAN:
- max_wait = 20;
+ max_wait = MEGASAS_RESET_WAIT_TIME;
cur_state = MFI_STATE_DEVICE_SCAN;
break;
case MFI_STATE_FLUSH_CACHE:
- max_wait = 20;
+ max_wait = MEGASAS_RESET_WAIT_TIME;
cur_state = MFI_STATE_FLUSH_CACHE;
break;
@@ -1627,8 +1941,10 @@
for (i = 0; i < (max_wait * 1000); i++) {
fw_state = instance->instancet->read_fw_status_reg(instance->reg_set) &
MFI_STATE_MASK ;
+ curr_abs_state =
+ instance->instancet->read_fw_status_reg(instance->reg_set);
- if (fw_state == cur_state) {
+ if (abs_state == curr_abs_state) {
msleep(1);
} else
break;
@@ -1637,7 +1953,7 @@
/*
* Return error if fw_state hasn't changed after max_wait
*/
- if (fw_state == cur_state) {
+ if (curr_abs_state == abs_state) {
printk(KERN_DEBUG "FW state [%d] hasn't changed "
"in %d secs\n", fw_state, max_wait);
return -ENODEV;
@@ -1715,6 +2031,10 @@
sge_sz = (IS_DMA64) ? sizeof(struct megasas_sge64) :
sizeof(struct megasas_sge32);
+ if (instance->flag_ieee) {
+ sge_sz = sizeof(struct megasas_sge_skinny);
+ }
+
/*
* Calculated the number of 64byte frames required for SGL
*/
@@ -1777,6 +2097,7 @@
}
cmd->frame->io.context = cmd->index;
+ cmd->frame->io.pad_0 = 0;
}
return 0;
@@ -1882,6 +2203,97 @@
return 0;
}
+/*
+ * megasas_get_pd_list_info - Returns FW's pd_list structure
+ * @instance: Adapter soft state
+ * @pd_list: pd_list structure
+ *
+ * Issues an internal command (DCMD) to get the FW's controller PD
+ * list structure. This information is mainly used to find out SYSTEM
+ * supported by the FW.
+ */
+static int
+megasas_get_pd_list(struct megasas_instance *instance)
+{
+ int ret = 0, pd_index = 0;
+ struct megasas_cmd *cmd;
+ struct megasas_dcmd_frame *dcmd;
+ struct MR_PD_LIST *ci;
+ struct MR_PD_ADDRESS *pd_addr;
+ dma_addr_t ci_h = 0;
+
+ cmd = megasas_get_cmd(instance);
+
+ if (!cmd) {
+ printk(KERN_DEBUG "megasas (get_pd_list): Failed to get cmd\n");
+ return -ENOMEM;
+ }
+
+ dcmd = &cmd->frame->dcmd;
+
+ ci = pci_alloc_consistent(instance->pdev,
+ MEGASAS_MAX_PD * sizeof(struct MR_PD_LIST), &ci_h);
+
+ if (!ci) {
+ printk(KERN_DEBUG "Failed to alloc mem for pd_list\n");
+ megasas_return_cmd(instance, cmd);
+ return -ENOMEM;
+ }
+
+ memset(ci, 0, sizeof(*ci));
+ memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE);
+
+ dcmd->mbox.b[0] = MR_PD_QUERY_TYPE_EXPOSED_TO_HOST;
+ dcmd->mbox.b[1] = 0;
+ dcmd->cmd = MFI_CMD_DCMD;
+ dcmd->cmd_status = 0xFF;
+ dcmd->sge_count = 1;
+ dcmd->flags = MFI_FRAME_DIR_READ;
+ dcmd->timeout = 0;
+ dcmd->data_xfer_len = MEGASAS_MAX_PD * sizeof(struct MR_PD_LIST);
+ dcmd->opcode = MR_DCMD_PD_LIST_QUERY;
+ dcmd->sgl.sge32[0].phys_addr = ci_h;
+ dcmd->sgl.sge32[0].length = MEGASAS_MAX_PD * sizeof(struct MR_PD_LIST);
+
+ if (!megasas_issue_polled(instance, cmd)) {
+ ret = 0;
+ } else {
+ ret = -1;
+ }
+
+ /*
+ * the following function will get the instance PD LIST.
+ */
+
+ pd_addr = ci->addr;
+
+ if ( ret == 0 &&
+ (ci->count <
+ (MEGASAS_MAX_PD_CHANNELS * MEGASAS_MAX_DEV_PER_CHANNEL))) {
+
+ memset(instance->pd_list, 0,
+ MEGASAS_MAX_PD * sizeof(struct megasas_pd_list));
+
+ for (pd_index = 0; pd_index < ci->count; pd_index++) {
+
+ instance->pd_list[pd_addr->deviceId].tid =
+ pd_addr->deviceId;
+ instance->pd_list[pd_addr->deviceId].driveType =
+ pd_addr->scsiDevType;
+ instance->pd_list[pd_addr->deviceId].driveState =
+ MR_PD_STATE_SYSTEM;
+ pd_addr++;
+ }
+ }
+
+ pci_free_consistent(instance->pdev,
+ MEGASAS_MAX_PD * sizeof(struct MR_PD_LIST),
+ ci, ci_h);
+ megasas_return_cmd(instance, cmd);
+
+ return ret;
+}
+
/**
* megasas_get_controller_info - Returns FW's controller structure
* @instance: Adapter soft state
@@ -2081,6 +2493,8 @@
* Map the message registers
*/
if ((instance->pdev->device == PCI_DEVICE_ID_LSI_SAS1078GEN2) ||
+ (instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0071SKINNY) ||
+ (instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0073SKINNY) ||
(instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0079GEN2)) {
instance->base_addr = pci_resource_start(instance->pdev, 1);
} else {
@@ -2111,6 +2525,10 @@
case PCI_DEVICE_ID_LSI_SAS0079GEN2:
instance->instancet = &megasas_instance_template_gen2;
break;
+ case PCI_DEVICE_ID_LSI_SAS0073SKINNY:
+ case PCI_DEVICE_ID_LSI_SAS0071SKINNY:
+ instance->instancet = &megasas_instance_template_skinny;
+ break;
case PCI_DEVICE_ID_LSI_SAS1064R:
case PCI_DEVICE_ID_DELL_PERC5:
default:
@@ -2166,6 +2584,10 @@
if (megasas_issue_init_mfi(instance))
goto fail_fw_init;
+ memset(instance->pd_list, 0 ,
+ (MEGASAS_MAX_PD * sizeof(struct megasas_pd_list)));
+ megasas_get_pd_list(instance);
+
ctrl_info = kmalloc(sizeof(struct megasas_ctrl_info), GFP_KERNEL);
/*
@@ -2409,6 +2831,11 @@
dcmd->sgl.sge32[0].phys_addr = (u32) instance->evt_detail_h;
dcmd->sgl.sge32[0].length = sizeof(struct megasas_evt_detail);
+ if (instance->aen_cmd != NULL) {
+ megasas_return_cmd(instance, cmd);
+ return 0;
+ }
+
/*
* Store reference to the cmd used to register for AEN. When an
* application wants us to register for AEN, we have to abort this
@@ -2419,7 +2846,8 @@
/*
* Issue the aen registration frame
*/
- instance->instancet->fire_cmd(cmd->frame_phys_addr ,0,instance->reg_set);
+ instance->instancet->fire_cmd(instance,
+ cmd->frame_phys_addr, 0, instance->reg_set);
return 0;
}
@@ -2465,7 +2893,13 @@
*/
host->irq = instance->pdev->irq;
host->unique_id = instance->unique_id;
- host->can_queue = instance->max_fw_cmds - MEGASAS_INT_CMDS;
+ if ((instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0073SKINNY) ||
+ (instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0071SKINNY)) {
+ host->can_queue =
+ instance->max_fw_cmds - MEGASAS_SKINNY_INT_CMDS;
+ } else
+ host->can_queue =
+ instance->max_fw_cmds - MEGASAS_INT_CMDS;
host->this_id = instance->init_id;
host->sg_tablesize = instance->max_num_sge;
host->max_sectors = instance->max_sectors_per_req;
@@ -2572,6 +3006,9 @@
*instance->producer = 0;
*instance->consumer = 0;
+ megasas_poll_wait_aen = 0;
+ instance->flag_ieee = 0;
+ instance->ev = NULL;
instance->evt_detail = pci_alloc_consistent(pdev,
sizeof(struct
@@ -2595,10 +3032,11 @@
init_waitqueue_head(&instance->abort_cmd_wait_q);
spin_lock_init(&instance->cmd_pool_lock);
+ spin_lock_init(&instance->fire_lock);
spin_lock_init(&instance->completion_lock);
+ spin_lock_init(&poll_aen_lock);
mutex_init(&instance->aen_mutex);
- sema_init(&instance->ioctl_sem, MEGASAS_INT_CMDS);
/*
* Initialize PCI related and misc parameters
@@ -2608,8 +3046,16 @@
instance->unique_id = pdev->bus->number << 8 | pdev->devfn;
instance->init_id = MEGASAS_DEFAULT_INIT_ID;
+ if ((instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0073SKINNY) ||
+ (instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0071SKINNY)) {
+ instance->flag_ieee = 1;
+ sema_init(&instance->ioctl_sem, MEGASAS_SKINNY_INT_CMDS);
+ } else
+ sema_init(&instance->ioctl_sem, MEGASAS_INT_CMDS);
+
megasas_dbg_lvl = 0;
instance->flag = 0;
+ instance->unload = 1;
instance->last_time = 0;
/*
@@ -2655,6 +3101,7 @@
if (megasas_io_attach(instance))
goto fail_io_attach;
+ instance->unload = 0;
return 0;
fail_start_aen:
@@ -2778,12 +3225,23 @@
instance = pci_get_drvdata(pdev);
host = instance->host;
+ instance->unload = 1;
if (poll_mode_io)
del_timer_sync(&instance->io_completion_timer);
megasas_flush_cache(instance);
megasas_shutdown_controller(instance, MR_DCMD_HIBERNATE_SHUTDOWN);
+
+ /* cancel the delayed work if this work still in queue */
+ if (instance->ev != NULL) {
+ struct megasas_aen_event *ev = instance->ev;
+ cancel_delayed_work(
+ (struct delayed_work *)&ev->hotplug_work);
+ flush_scheduled_work();
+ instance->ev = NULL;
+ }
+
tasklet_kill(&instance->isr_tasklet);
pci_set_drvdata(instance->pdev, instance);
@@ -2873,6 +3331,8 @@
megasas_start_timer(instance, &instance->io_completion_timer,
megasas_io_completion_timer,
MEGASAS_COMPLETION_TIMER_INTERVAL);
+ instance->unload = 0;
+
return 0;
fail_irq:
@@ -2913,6 +3373,7 @@
struct megasas_instance *instance;
instance = pci_get_drvdata(pdev);
+ instance->unload = 1;
host = instance->host;
if (poll_mode_io)
@@ -2921,6 +3382,16 @@
scsi_remove_host(instance->host);
megasas_flush_cache(instance);
megasas_shutdown_controller(instance, MR_DCMD_CTRL_SHUTDOWN);
+
+ /* cancel the delayed work if this work still in queue*/
+ if (instance->ev != NULL) {
+ struct megasas_aen_event *ev = instance->ev;
+ cancel_delayed_work(
+ (struct delayed_work *)&ev->hotplug_work);
+ flush_scheduled_work();
+ instance->ev = NULL;
+ }
+
tasklet_kill(&instance->isr_tasklet);
/*
@@ -2969,6 +3440,7 @@
static void megasas_shutdown(struct pci_dev *pdev)
{
struct megasas_instance *instance = pci_get_drvdata(pdev);
+ instance->unload = 1;
megasas_flush_cache(instance);
megasas_shutdown_controller(instance, MR_DCMD_CTRL_SHUTDOWN);
}
@@ -3016,6 +3488,23 @@
}
/**
+ * megasas_mgmt_poll - char node "poll" entry point
+ * */
+static unsigned int megasas_mgmt_poll(struct file *file, poll_table *wait)
+{
+ unsigned int mask;
+ unsigned long flags;
+ poll_wait(file, &megasas_poll_wait, wait);
+ spin_lock_irqsave(&poll_aen_lock, flags);
+ if (megasas_poll_wait_aen)
+ mask = (POLLIN | POLLRDNORM);
+ else
+ mask = 0;
+ spin_unlock_irqrestore(&poll_aen_lock, flags);
+ return mask;
+}
+
+/**
* megasas_mgmt_fw_ioctl - Issues management ioctls to FW
* @instance: Adapter soft state
* @argp: User's ioctl packet
@@ -3032,7 +3521,7 @@
int error = 0, i;
void *sense = NULL;
dma_addr_t sense_handle;
- u32 *sense_ptr;
+ unsigned long *sense_ptr;
memset(kbuff_arr, 0, sizeof(kbuff_arr));
@@ -3056,6 +3545,7 @@
*/
memcpy(cmd->frame, ioc->frame.raw, 2 * MEGAMFI_FRAME_SIZE);
cmd->frame->hdr.context = cmd->index;
+ cmd->frame->hdr.pad_0 = 0;
/*
* The management interface between applications and the fw uses
@@ -3109,7 +3599,7 @@
}
sense_ptr =
- (u32 *) ((unsigned long)cmd->frame + ioc->sense_off);
+ (unsigned long *) ((unsigned long)cmd->frame + ioc->sense_off);
*sense_ptr = sense_handle;
}
@@ -3140,8 +3630,8 @@
* sense_ptr points to the location that has the user
* sense buffer address
*/
- sense_ptr = (u32 *) ((unsigned long)ioc->frame.raw +
- ioc->sense_off);
+ sense_ptr = (unsigned long *) ((unsigned long)ioc->frame.raw +
+ ioc->sense_off);
if (copy_to_user((void __user *)((unsigned long)(*sense_ptr)),
sense, ioc->sense_len)) {
@@ -3177,20 +3667,6 @@
return error;
}
-static struct megasas_instance *megasas_lookup_instance(u16 host_no)
-{
- int i;
-
- for (i = 0; i < megasas_mgmt_info.max_index; i++) {
-
- if ((megasas_mgmt_info.instance[i]) &&
- (megasas_mgmt_info.instance[i]->host->host_no == host_no))
- return megasas_mgmt_info.instance[i];
- }
-
- return NULL;
-}
-
static int megasas_mgmt_ioctl_fw(struct file *file, unsigned long arg)
{
struct megasas_iocpacket __user *user_ioc =
@@ -3214,6 +3690,17 @@
goto out_kfree_ioc;
}
+ if (instance->hw_crit_error == 1) {
+ printk(KERN_DEBUG "Controller in Crit ERROR\n");
+ error = -ENODEV;
+ goto out_kfree_ioc;
+ }
+
+ if (instance->unload == 1) {
+ error = -ENODEV;
+ goto out_kfree_ioc;
+ }
+
/*
* We will allow only MEGASAS_INT_CMDS number of parallel ioctl cmds
*/
@@ -3249,6 +3736,14 @@
if (!instance)
return -ENODEV;
+ if (instance->hw_crit_error == 1) {
+ error = -ENODEV;
+ }
+
+ if (instance->unload == 1) {
+ return -ENODEV;
+ }
+
mutex_lock(&instance->aen_mutex);
error = megasas_register_aen(instance, aen.seq_num,
aen.class_locale_word);
@@ -3337,6 +3832,7 @@
.open = megasas_mgmt_open,
.fasync = megasas_mgmt_fasync,
.unlocked_ioctl = megasas_mgmt_ioctl,
+ .poll = megasas_mgmt_poll,
#ifdef CONFIG_COMPAT
.compat_ioctl = megasas_mgmt_compat_ioctl,
#endif
@@ -3378,6 +3874,15 @@
NULL);
static ssize_t
+megasas_sysfs_show_support_poll_for_event(struct device_driver *dd, char *buf)
+{
+ return sprintf(buf, "%u\n", support_poll_for_event);
+}
+
+static DRIVER_ATTR(support_poll_for_event, S_IRUGO,
+ megasas_sysfs_show_support_poll_for_event, NULL);
+
+static ssize_t
megasas_sysfs_show_dbg_lvl(struct device_driver *dd, char *buf)
{
return sprintf(buf, "%u\n", megasas_dbg_lvl);
@@ -3451,6 +3956,92 @@
return retval;
}
+static void
+megasas_aen_polling(struct work_struct *work)
+{
+ struct megasas_aen_event *ev =
+ container_of(work, struct megasas_aen_event, hotplug_work);
+ struct megasas_instance *instance = ev->instance;
+ union megasas_evt_class_locale class_locale;
+ struct Scsi_Host *host;
+ struct scsi_device *sdev1;
+ u16 pd_index = 0;
+ int i, j, doscan = 0;
+ u32 seq_num;
+ int error;
+
+ if (!instance) {
+ printk(KERN_ERR "invalid instance!\n");
+ kfree(ev);
+ return;
+ }
+ instance->ev = NULL;
+ host = instance->host;
+ if (instance->evt_detail) {
+
+ switch (instance->evt_detail->code) {
+ case MR_EVT_PD_INSERTED:
+ case MR_EVT_PD_REMOVED:
+ case MR_EVT_CTRL_HOST_BUS_SCAN_REQUESTED:
+ doscan = 1;
+ break;
+ default:
+ doscan = 0;
+ break;
+ }
+ } else {
+ printk(KERN_ERR "invalid evt_detail!\n");
+ kfree(ev);
+ return;
+ }
+
+ if (doscan) {
+ printk(KERN_INFO "scanning ...\n");
+ megasas_get_pd_list(instance);
+ for (i = 0; i < MEGASAS_MAX_PD_CHANNELS; i++) {
+ for (j = 0; j < MEGASAS_MAX_DEV_PER_CHANNEL; j++) {
+ pd_index = i*MEGASAS_MAX_DEV_PER_CHANNEL + j;
+ sdev1 = scsi_device_lookup(host, i, j, 0);
+ if (instance->pd_list[pd_index].driveState ==
+ MR_PD_STATE_SYSTEM) {
+ if (!sdev1) {
+ scsi_add_device(host, i, j, 0);
+ }
+ if (sdev1)
+ scsi_device_put(sdev1);
+ } else {
+ if (sdev1) {
+ scsi_remove_device(sdev1);
+ scsi_device_put(sdev1);
+ }
+ }
+ }
+ }
+ }
+
+ if ( instance->aen_cmd != NULL ) {
+ kfree(ev);
+ return ;
+ }
+
+ seq_num = instance->evt_detail->seq_num + 1;
+
+ /* Register AEN with FW for latest sequence number plus 1 */
+ class_locale.members.reserved = 0;
+ class_locale.members.locale = MR_EVT_LOCALE_ALL;
+ class_locale.members.class = MR_EVT_CLASS_DEBUG;
+ mutex_lock(&instance->aen_mutex);
+ error = megasas_register_aen(instance, seq_num,
+ class_locale.word);
+ mutex_unlock(&instance->aen_mutex);
+
+ if (error)
+ printk(KERN_ERR "register aen failed error %x\n", error);
+
+ kfree(ev);
+}
+
+
static DRIVER_ATTR(poll_mode_io, S_IRUGO|S_IWUGO,
megasas_sysfs_show_poll_mode_io,
megasas_sysfs_set_poll_mode_io);
@@ -3468,6 +4059,8 @@
printk(KERN_INFO "megasas: %s %s\n", MEGASAS_VERSION,
MEGASAS_EXT_VERSION);
+ support_poll_for_event = 2;
+
memset(&megasas_mgmt_info, 0, sizeof(megasas_mgmt_info));
/*
@@ -3500,6 +4093,12 @@
&driver_attr_release_date);
if (rval)
goto err_dcf_rel_date;
+
+ rval = driver_create_file(&megasas_pci_driver.driver,
+ &driver_attr_support_poll_for_event);
+ if (rval)
+ goto err_dcf_support_poll_for_event;
+
rval = driver_create_file(&megasas_pci_driver.driver,
&driver_attr_dbg_lvl);
if (rval)
@@ -3516,7 +4115,12 @@
&driver_attr_dbg_lvl);
err_dcf_dbg_lvl:
driver_remove_file(&megasas_pci_driver.driver,
+ &driver_attr_support_poll_for_event);
+
+err_dcf_support_poll_for_event:
+ driver_remove_file(&megasas_pci_driver.driver,
&driver_attr_release_date);
+
err_dcf_rel_date:
driver_remove_file(&megasas_pci_driver.driver, &driver_attr_version);
err_dcf_attr_ver:
diff --git a/drivers/scsi/megaraid/megaraid_sas.h b/drivers/scsi/megaraid/megaraid_sas.h
index 0d03324..72b28e4 100644
--- a/drivers/scsi/megaraid/megaraid_sas.h
+++ b/drivers/scsi/megaraid/megaraid_sas.h
@@ -18,9 +18,9 @@
/*
* MegaRAID SAS Driver meta data
*/
-#define MEGASAS_VERSION "00.00.04.01"
-#define MEGASAS_RELDATE "July 24, 2008"
-#define MEGASAS_EXT_VERSION "Thu July 24 11:41:51 PST 2008"
+#define MEGASAS_VERSION "00.00.04.12-rc1"
+#define MEGASAS_RELDATE "Sep. 17, 2009"
+#define MEGASAS_EXT_VERSION "Thu Sep. 17 11:41:51 PST 2009"
/*
* Device IDs
@@ -30,6 +30,8 @@
#define PCI_DEVICE_ID_LSI_VERDE_ZCR 0x0413
#define PCI_DEVICE_ID_LSI_SAS1078GEN2 0x0078
#define PCI_DEVICE_ID_LSI_SAS0079GEN2 0x0079
+#define PCI_DEVICE_ID_LSI_SAS0073SKINNY 0x0073
+#define PCI_DEVICE_ID_LSI_SAS0071SKINNY 0x0071
/*
* =====================================
@@ -94,6 +96,7 @@
#define MFI_FRAME_DIR_WRITE 0x0008
#define MFI_FRAME_DIR_READ 0x0010
#define MFI_FRAME_DIR_BOTH 0x0018
+#define MFI_FRAME_IEEE 0x0020
/*
* Definition for cmd_status
@@ -131,6 +134,7 @@
#define MR_DCMD_CLUSTER 0x08000000
#define MR_DCMD_CLUSTER_RESET_ALL 0x08010100
#define MR_DCMD_CLUSTER_RESET_LD 0x08010200
+#define MR_DCMD_PD_LIST_QUERY 0x02010100
/*
* MFI command completion codes
@@ -251,10 +255,101 @@
MR_EVT_ARGS_STR,
MR_EVT_ARGS_TIME,
MR_EVT_ARGS_ECC,
-
+ MR_EVT_ARGS_LD_PROP,
+ MR_EVT_ARGS_PD_SPARE,
+ MR_EVT_ARGS_PD_INDEX,
+ MR_EVT_ARGS_DIAG_PASS,
+ MR_EVT_ARGS_DIAG_FAIL,
+ MR_EVT_ARGS_PD_LBA_LBA,
+ MR_EVT_ARGS_PORT_PHY,
+ MR_EVT_ARGS_PD_MISSING,
+ MR_EVT_ARGS_PD_ADDRESS,
+ MR_EVT_ARGS_BITMAP,
+ MR_EVT_ARGS_CONNECTOR,
+ MR_EVT_ARGS_PD_PD,
+ MR_EVT_ARGS_PD_FRU,
+ MR_EVT_ARGS_PD_PATHINFO,
+ MR_EVT_ARGS_PD_POWER_STATE,
+ MR_EVT_ARGS_GENERIC,
};
/*
+ * define constants for device list query options
+ */
+enum MR_PD_QUERY_TYPE {
+ MR_PD_QUERY_TYPE_ALL = 0,
+ MR_PD_QUERY_TYPE_STATE = 1,
+ MR_PD_QUERY_TYPE_POWER_STATE = 2,
+ MR_PD_QUERY_TYPE_MEDIA_TYPE = 3,
+ MR_PD_QUERY_TYPE_SPEED = 4,
+ MR_PD_QUERY_TYPE_EXPOSED_TO_HOST = 5,
+};
+
+#define MR_EVT_CFG_CLEARED 0x0004
+#define MR_EVT_LD_STATE_CHANGE 0x0051
+#define MR_EVT_PD_INSERTED 0x005b
+#define MR_EVT_PD_REMOVED 0x0070
+#define MR_EVT_LD_CREATED 0x008a
+#define MR_EVT_LD_DELETED 0x008b
+#define MR_EVT_FOREIGN_CFG_IMPORTED 0x00db
+#define MR_EVT_LD_OFFLINE 0x00fc
+#define MR_EVT_CTRL_HOST_BUS_SCAN_REQUESTED 0x0152
+#define MAX_LOGICAL_DRIVES 64
+
+enum MR_PD_STATE {
+ MR_PD_STATE_UNCONFIGURED_GOOD = 0x00,
+ MR_PD_STATE_UNCONFIGURED_BAD = 0x01,
+ MR_PD_STATE_HOT_SPARE = 0x02,
+ MR_PD_STATE_OFFLINE = 0x10,
+ MR_PD_STATE_FAILED = 0x11,
+ MR_PD_STATE_REBUILD = 0x14,
+ MR_PD_STATE_ONLINE = 0x18,
+ MR_PD_STATE_COPYBACK = 0x20,
+ MR_PD_STATE_SYSTEM = 0x40,
+ };
+
+
+ /*
+ * defines the physical drive address structure
+ */
+struct MR_PD_ADDRESS {
+ u16 deviceId;
+ u16 enclDeviceId;
+
+ union {
+ struct {
+ u8 enclIndex;
+ u8 slotNumber;
+ } mrPdAddress;
+ struct {
+ u8 enclPosition;
+ u8 enclConnectorIndex;
+ } mrEnclAddress;
+ };
+ u8 scsiDevType;
+ union {
+ u8 connectedPortBitmap;
+ u8 connectedPortNumbers;
+ };
+ u64 sasAddr[2];
+} __packed;
+
+/*
+ * defines the physical drive list structure
+ */
+struct MR_PD_LIST {
+ u32 size;
+ u32 count;
+ struct MR_PD_ADDRESS addr[1];
+} __packed;
+
+struct megasas_pd_list {
+ u16 tid;
+ u8 driveType;
+ u8 driveState;
+} __packed;
+
+/*
* SAS controller properties
*/
struct megasas_ctrl_prop {
@@ -282,7 +377,7 @@
u8 expose_encl_devices;
u8 reserved[38];
-} __attribute__ ((packed));
+} __packed;
/*
* SAS controller information
@@ -525,7 +620,7 @@
u8 pad[0x800 - 0x6a0];
-} __attribute__ ((packed));
+} __packed;
/*
* ===============================
@@ -540,6 +635,8 @@
#define MEGASAS_DEFAULT_INIT_ID -1
#define MEGASAS_MAX_LUN 8
#define MEGASAS_MAX_LD 64
+#define MEGASAS_MAX_PD (MEGASAS_MAX_PD_CHANNELS * \
+ MEGASAS_MAX_DEV_PER_CHANNEL)
#define MEGASAS_DBG_LVL 1
@@ -570,6 +667,7 @@
* is shown below
*/
#define MEGASAS_INT_CMDS 32
+#define MEGASAS_SKINNY_INT_CMDS 5
/*
* FW can accept both 32 and 64 bit SGLs. We want to allocate 32/64 bit
@@ -584,6 +682,8 @@
#define MFI_REPLY_1078_MESSAGE_INTERRUPT 0x80000000
#define MFI_REPLY_GEN2_MESSAGE_INTERRUPT 0x00000001
#define MFI_GEN2_ENABLE_INTERRUPT_MASK (0x00000001 | 0x00000004)
+#define MFI_REPLY_SKINNY_MESSAGE_INTERRUPT 0x40000000
+#define MFI_SKINNY_ENABLE_INTERRUPT_MASK (0x00000001)
/*
* register set for both 1068 and 1078 controllers
@@ -644,10 +744,17 @@
} __attribute__ ((packed));
+struct megasas_sge_skinny {
+ u64 phys_addr;
+ u32 length;
+ u32 flag;
+} __packed;
+
union megasas_sgl {
struct megasas_sge32 sge32[1];
struct megasas_sge64 sge64[1];
+ struct megasas_sge_skinny sge_skinny[1];
} __attribute__ ((packed));
@@ -1061,16 +1168,10 @@
} __attribute__ ((packed));
- struct megasas_instance_template {
- void (*fire_cmd)(dma_addr_t ,u32 ,struct megasas_register_set __iomem *);
-
- void (*enable_intr)(struct megasas_register_set __iomem *) ;
- void (*disable_intr)(struct megasas_register_set __iomem *);
-
- int (*clear_intr)(struct megasas_register_set __iomem *);
-
- u32 (*read_fw_status_reg)(struct megasas_register_set __iomem *);
- };
+struct megasas_aen_event {
+ struct work_struct hotplug_work;
+ struct megasas_instance *instance;
+};
struct megasas_instance {
@@ -1085,17 +1186,21 @@
unsigned long base_addr;
struct megasas_register_set __iomem *reg_set;
+ struct megasas_pd_list pd_list[MEGASAS_MAX_PD];
s8 init_id;
u16 max_num_sge;
u16 max_fw_cmds;
u32 max_sectors_per_req;
+ struct megasas_aen_event *ev;
struct megasas_cmd **cmd_list;
struct list_head cmd_pool;
spinlock_t cmd_pool_lock;
/* used to synch producer, consumer ptrs in dpc */
spinlock_t completion_lock;
+ /* used to sync fire the cmd to fw */
+ spinlock_t fire_lock;
struct dma_pool *frame_dma_pool;
struct dma_pool *sense_dma_pool;
@@ -1120,11 +1225,25 @@
struct tasklet_struct isr_tasklet;
u8 flag;
+ u8 unload;
+ u8 flag_ieee;
unsigned long last_time;
struct timer_list io_completion_timer;
};
+struct megasas_instance_template {
+ void (*fire_cmd)(struct megasas_instance *, dma_addr_t, \
+ u32, struct megasas_register_set __iomem *);
+
+ void (*enable_intr)(struct megasas_register_set __iomem *) ;
+ void (*disable_intr)(struct megasas_register_set __iomem *);
+
+ int (*clear_intr)(struct megasas_register_set __iomem *);
+
+ u32 (*read_fw_status_reg)(struct megasas_register_set __iomem *);
+};
+
#define MEGASAS_IS_LOGICAL(scp) \
(scp->device->channel < MEGASAS_MAX_PD_CHANNELS) ? 0 : 1
diff --git a/drivers/scsi/mpt2sas/mpi/mpi2.h b/drivers/scsi/mpt2sas/mpi/mpi2.h
index f9f6c08..9141681 100644
--- a/drivers/scsi/mpt2sas/mpi/mpi2.h
+++ b/drivers/scsi/mpt2sas/mpi/mpi2.h
@@ -8,7 +8,7 @@
* scatter/gather formats.
* Creation Date: June 21, 2006
*
- * mpi2.h Version: 02.00.12
+ * mpi2.h Version: 02.00.13
*
* Version History
* ---------------
@@ -52,6 +52,7 @@
* MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR and made those
* bytes reserved.
* Added RAID Accelerator functionality.
+ * 07-30-09 02.00.13 Bumped MPI2_HEADER_VERSION_UNIT.
* --------------------------------------------------------------------------
*/
@@ -77,7 +78,7 @@
#define MPI2_VERSION_02_00 (0x0200)
/* versioning for this MPI header set */
-#define MPI2_HEADER_VERSION_UNIT (0x0C)
+#define MPI2_HEADER_VERSION_UNIT (0x0D)
#define MPI2_HEADER_VERSION_DEV (0x00)
#define MPI2_HEADER_VERSION_UNIT_MASK (0xFF00)
#define MPI2_HEADER_VERSION_UNIT_SHIFT (8)
diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h b/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h
index ab47c46..1611c57 100644
--- a/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h
+++ b/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h
@@ -6,7 +6,7 @@
* Title: MPI Configuration messages and pages
* Creation Date: November 10, 2006
*
- * mpi2_cnfg.h Version: 02.00.11
+ * mpi2_cnfg.h Version: 02.00.12
*
* Version History
* ---------------
@@ -100,6 +100,13 @@
* Added expander reduced functionality data to SAS
* Expander Page 0.
* Added SAS PHY Page 2 and SAS PHY Page 3.
+ * 07-30-09 02.00.12 Added IO Unit Page 7.
+ * Added new device ids.
+ * Added SAS IO Unit Page 5.
+ * Added partial and slumber power management capable flags
+ * to SAS Device Page 0 Flags field.
+ * Added PhyInfo defines for power condition.
+ * Added Ethernet configuration pages.
* --------------------------------------------------------------------------
*/
@@ -182,6 +189,7 @@
#define MPI2_CONFIG_EXTPAGETYPE_RAID_CONFIG (0x16)
#define MPI2_CONFIG_EXTPAGETYPE_DRIVER_MAPPING (0x17)
#define MPI2_CONFIG_EXTPAGETYPE_SAS_PORT (0x18)
+#define MPI2_CONFIG_EXTPAGETYPE_ETHERNET (0x19)
/*****************************************************************************
@@ -268,6 +276,14 @@
#define MPI2_DPM_PGAD_START_ENTRY_MASK (0x0000FFFF)
+/* Ethernet PageAddress format */
+#define MPI2_ETHERNET_PGAD_FORM_MASK (0xF0000000)
+#define MPI2_ETHERNET_PGAD_FORM_IF_NUM (0x00000000)
+
+#define MPI2_ETHERNET_PGAD_IF_NUMBER_MASK (0x000000FF)
+
+
+
/****************************************************************************
* Configuration messages
****************************************************************************/
@@ -349,6 +365,15 @@
#define MPI2_MFGPAGE_DEVID_SAS2116_1 (0x0064)
#define MPI2_MFGPAGE_DEVID_SAS2116_2 (0x0065)
+#define MPI2_MFGPAGE_DEVID_SAS2208_1 (0x0080)
+#define MPI2_MFGPAGE_DEVID_SAS2208_2 (0x0081)
+#define MPI2_MFGPAGE_DEVID_SAS2208_3 (0x0082)
+#define MPI2_MFGPAGE_DEVID_SAS2208_4 (0x0083)
+#define MPI2_MFGPAGE_DEVID_SAS2208_5 (0x0084)
+#define MPI2_MFGPAGE_DEVID_SAS2208_6 (0x0085)
+#define MPI2_MFGPAGE_DEVID_SAS2208_7 (0x0086)
+#define MPI2_MFGPAGE_DEVID_SAS2208_8 (0x0087)
+
/* Manufacturing Page 0 */
@@ -787,6 +812,56 @@
#define MPI2_IOUNITPAGE6_FLAGS_ENABLE_RAID_ACCELERATOR (0x0001)
+/* IO Unit Page 7 */
+
+typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_7 {
+ MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
+ U16 Reserved1; /* 0x04 */
+ U8 PCIeWidth; /* 0x06 */
+ U8 PCIeSpeed; /* 0x07 */
+ U32 ProcessorState; /* 0x08 */
+ U32 Reserved2; /* 0x0C */
+ U16 IOCTemperature; /* 0x10 */
+ U8 IOCTemperatureUnits; /* 0x12 */
+ U8 IOCSpeed; /* 0x13 */
+ U32 Reserved3; /* 0x14 */
+} MPI2_CONFIG_PAGE_IO_UNIT_7, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_7,
+ Mpi2IOUnitPage7_t, MPI2_POINTER pMpi2IOUnitPage7_t;
+
+#define MPI2_IOUNITPAGE7_PAGEVERSION (0x00)
+
+/* defines for IO Unit Page 7 PCIeWidth field */
+#define MPI2_IOUNITPAGE7_PCIE_WIDTH_X1 (0x01)
+#define MPI2_IOUNITPAGE7_PCIE_WIDTH_X2 (0x02)
+#define MPI2_IOUNITPAGE7_PCIE_WIDTH_X4 (0x04)
+#define MPI2_IOUNITPAGE7_PCIE_WIDTH_X8 (0x08)
+
+/* defines for IO Unit Page 7 PCIeSpeed field */
+#define MPI2_IOUNITPAGE7_PCIE_SPEED_2_5_GBPS (0x00)
+#define MPI2_IOUNITPAGE7_PCIE_SPEED_5_0_GBPS (0x01)
+#define MPI2_IOUNITPAGE7_PCIE_SPEED_8_0_GBPS (0x02)
+
+/* defines for IO Unit Page 7 ProcessorState field */
+#define MPI2_IOUNITPAGE7_PSTATE_MASK_SECOND (0x0000000F)
+#define MPI2_IOUNITPAGE7_PSTATE_SHIFT_SECOND (0)
+
+#define MPI2_IOUNITPAGE7_PSTATE_NOT_PRESENT (0x00)
+#define MPI2_IOUNITPAGE7_PSTATE_DISABLED (0x01)
+#define MPI2_IOUNITPAGE7_PSTATE_ENABLED (0x02)
+
+/* defines for IO Unit Page 7 IOCTemperatureUnits field */
+#define MPI2_IOUNITPAGE7_IOC_TEMP_NOT_PRESENT (0x00)
+#define MPI2_IOUNITPAGE7_IOC_TEMP_FAHRENHEIT (0x01)
+#define MPI2_IOUNITPAGE7_IOC_TEMP_CELSIUS (0x02)
+
+/* defines for IO Unit Page 7 IOCSpeed field */
+#define MPI2_IOUNITPAGE7_IOC_SPEED_FULL (0x01)
+#define MPI2_IOUNITPAGE7_IOC_SPEED_HALF (0x02)
+#define MPI2_IOUNITPAGE7_IOC_SPEED_QUARTER (0x04)
+#define MPI2_IOUNITPAGE7_IOC_SPEED_EIGHTH (0x08)
+
+
+
/****************************************************************************
* IOC Config Pages
****************************************************************************/
@@ -1470,6 +1545,12 @@
/* values for PhyInfo fields */
#define MPI2_SAS_PHYINFO_PHY_VACANT (0x80000000)
+
+#define MPI2_SAS_PHYINFO_PHY_POWER_CONDITION_MASK (0x18000000)
+#define MPI2_SAS_PHYINFO_PHY_POWER_ACTIVE (0x00000000)
+#define MPI2_SAS_PHYINFO_PHY_POWER_PARTIAL (0x08000000)
+#define MPI2_SAS_PHYINFO_PHY_POWER_SLUMBER (0x10000000)
+
#define MPI2_SAS_PHYINFO_CHANGED_REQ_INSIDE_ZPSDS (0x04000000)
#define MPI2_SAS_PHYINFO_INSIDE_ZPSDS_PERSISTENT (0x02000000)
#define MPI2_SAS_PHYINFO_REQ_INSIDE_ZPSDS (0x01000000)
@@ -1682,11 +1763,11 @@
/* values for SAS IO Unit Page 1 PortFlags */
#define MPI2_SASIOUNIT1_PORT_FLAGS_AUTO_PORT_CONFIG (0x01)
-/* values for SAS IO Unit Page 2 PhyFlags */
+/* values for SAS IO Unit Page 1 PhyFlags */
#define MPI2_SASIOUNIT1_PHYFLAGS_ZONING_ENABLE (0x10)
#define MPI2_SASIOUNIT1_PHYFLAGS_PHY_DISABLE (0x08)
-/* values for SAS IO Unit Page 0 MaxMinLinkRate */
+/* values for SAS IO Unit Page 1 MaxMinLinkRate */
#define MPI2_SASIOUNIT1_MAX_RATE_MASK (0xF0)
#define MPI2_SASIOUNIT1_MAX_RATE_1_5 (0x80)
#define MPI2_SASIOUNIT1_MAX_RATE_3_0 (0x90)
@@ -1745,6 +1826,74 @@
#define MPI2_SASIOUNIT4_PHY_SPINUP_GROUP_MASK (0x03)
+/* SAS IO Unit Page 5 */
+
+typedef struct _MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS {
+ U8 ControlFlags; /* 0x00 */
+ U8 Reserved1; /* 0x01 */
+ U16 InactivityTimerExponent; /* 0x02 */
+ U8 SATAPartialTimeout; /* 0x04 */
+ U8 Reserved2; /* 0x05 */
+ U8 SATASlumberTimeout; /* 0x06 */
+ U8 Reserved3; /* 0x07 */
+ U8 SASPartialTimeout; /* 0x08 */
+ U8 Reserved4; /* 0x09 */
+ U8 SASSlumberTimeout; /* 0x0A */
+ U8 Reserved5; /* 0x0B */
+} MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS,
+ MPI2_POINTER PTR_MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS,
+ Mpi2SasIOUnit5PhyPmSettings_t, MPI2_POINTER pMpi2SasIOUnit5PhyPmSettings_t;
+
+/* defines for ControlFlags field */
+#define MPI2_SASIOUNIT5_CONTROL_SAS_SLUMBER_ENABLE (0x08)
+#define MPI2_SASIOUNIT5_CONTROL_SAS_PARTIAL_ENABLE (0x04)
+#define MPI2_SASIOUNIT5_CONTROL_SATA_SLUMBER_ENABLE (0x02)
+#define MPI2_SASIOUNIT5_CONTROL_SATA_PARTIAL_ENABLE (0x01)
+
+/* defines for InactivityTimerExponent field */
+#define MPI2_SASIOUNIT5_ITE_MASK_SAS_SLUMBER (0x7000)
+#define MPI2_SASIOUNIT5_ITE_SHIFT_SAS_SLUMBER (12)
+#define MPI2_SASIOUNIT5_ITE_MASK_SAS_PARTIAL (0x0700)
+#define MPI2_SASIOUNIT5_ITE_SHIFT_SAS_PARTIAL (8)
+#define MPI2_SASIOUNIT5_ITE_MASK_SATA_SLUMBER (0x0070)
+#define MPI2_SASIOUNIT5_ITE_SHIFT_SATA_SLUMBER (4)
+#define MPI2_SASIOUNIT5_ITE_MASK_SATA_PARTIAL (0x0007)
+#define MPI2_SASIOUNIT5_ITE_SHIFT_SATA_PARTIAL (0)
+
+#define MPI2_SASIOUNIT5_ITE_TEN_SECONDS (7)
+#define MPI2_SASIOUNIT5_ITE_ONE_SECOND (6)
+#define MPI2_SASIOUNIT5_ITE_HUNDRED_MILLISECONDS (5)
+#define MPI2_SASIOUNIT5_ITE_TEN_MILLISECONDS (4)
+#define MPI2_SASIOUNIT5_ITE_ONE_MILLISECOND (3)
+#define MPI2_SASIOUNIT5_ITE_HUNDRED_MICROSECONDS (2)
+#define MPI2_SASIOUNIT5_ITE_TEN_MICROSECONDS (1)
+#define MPI2_SASIOUNIT5_ITE_ONE_MICROSECOND (0)
+
+/*
+ * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ * one and check Header.ExtPageLength or NumPhys at runtime.
+ */
+#ifndef MPI2_SAS_IOUNIT5_PHY_MAX
+#define MPI2_SAS_IOUNIT5_PHY_MAX (1)
+#endif
+
+typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_5 {
+ MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
+ U8 NumPhys; /* 0x08 */
+ U8 Reserved1; /* 0x09 */
+ U16 Reserved2; /* 0x0A */
+ U32 Reserved3; /* 0x0C */
+ MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS SASPhyPowerManagementSettings
+ [MPI2_SAS_IOUNIT5_PHY_MAX]; /* 0x10 */
+} MPI2_CONFIG_PAGE_SASIOUNIT_5,
+ MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SASIOUNIT_5,
+ Mpi2SasIOUnitPage5_t, MPI2_POINTER pMpi2SasIOUnitPage5_t;
+
+#define MPI2_SASIOUNITPAGE5_PAGEVERSION (0x00)
+
+
+
+
/****************************************************************************
* SAS Expander Config Pages
****************************************************************************/
@@ -1927,6 +2076,8 @@
/* see mpi2_sas.h for values for SAS Device Page 0 DeviceInfo values */
/* values for SAS Device Page 0 Flags field */
+#define MPI2_SAS_DEVICE0_FLAGS_SLUMBER_PM_CAPABLE (0x1000)
+#define MPI2_SAS_DEVICE0_FLAGS_PARTIAL_PM_CAPABLE (0x0800)
#define MPI2_SAS_DEVICE0_FLAGS_SATA_ASYNCHRONOUS_NOTIFY (0x0400)
#define MPI2_SAS_DEVICE0_FLAGS_SATA_SW_PRESERVE (0x0200)
#define MPI2_SAS_DEVICE0_FLAGS_UNSUPPORTED_DEVICE (0x0100)
@@ -2343,5 +2494,122 @@
#define MPI2_DRVMAP0_MAPINFO_MISSING_MASK (0x000F)
+/****************************************************************************
+* Ethernet Config Pages
+****************************************************************************/
+
+/* Ethernet Page 0 */
+
+/* IP address (union of IPv4 and IPv6) */
+typedef union _MPI2_ETHERNET_IP_ADDR {
+ U32 IPv4Addr;
+ U32 IPv6Addr[4];
+} MPI2_ETHERNET_IP_ADDR, MPI2_POINTER PTR_MPI2_ETHERNET_IP_ADDR,
+ Mpi2EthernetIpAddr_t, MPI2_POINTER pMpi2EthernetIpAddr_t;
+
+#define MPI2_ETHERNET_HOST_NAME_LENGTH (32)
+
+typedef struct _MPI2_CONFIG_PAGE_ETHERNET_0 {
+ MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
+ U8 NumInterfaces; /* 0x08 */
+ U8 Reserved0; /* 0x09 */
+ U16 Reserved1; /* 0x0A */
+ U32 Status; /* 0x0C */
+ U8 MediaState; /* 0x10 */
+ U8 Reserved2; /* 0x11 */
+ U16 Reserved3; /* 0x12 */
+ U8 MacAddress[6]; /* 0x14 */
+ U8 Reserved4; /* 0x1A */
+ U8 Reserved5; /* 0x1B */
+ MPI2_ETHERNET_IP_ADDR IpAddress; /* 0x1C */
+ MPI2_ETHERNET_IP_ADDR SubnetMask; /* 0x2C */
+ MPI2_ETHERNET_IP_ADDR GatewayIpAddress; /* 0x3C */
+ MPI2_ETHERNET_IP_ADDR DNS1IpAddress; /* 0x4C */
+ MPI2_ETHERNET_IP_ADDR DNS2IpAddress; /* 0x5C */
+ MPI2_ETHERNET_IP_ADDR DhcpIpAddress; /* 0x6C */
+ U8 HostName
+ [MPI2_ETHERNET_HOST_NAME_LENGTH];/* 0x7C */
+} MPI2_CONFIG_PAGE_ETHERNET_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_ETHERNET_0,
+ Mpi2EthernetPage0_t, MPI2_POINTER pMpi2EthernetPage0_t;
+
+#define MPI2_ETHERNETPAGE0_PAGEVERSION (0x00)
+
+/* values for Ethernet Page 0 Status field */
+#define MPI2_ETHPG0_STATUS_IPV6_CAPABLE (0x80000000)
+#define MPI2_ETHPG0_STATUS_IPV4_CAPABLE (0x40000000)
+#define MPI2_ETHPG0_STATUS_CONSOLE_CONNECTED (0x20000000)
+#define MPI2_ETHPG0_STATUS_DEFAULT_IF (0x00000100)
+#define MPI2_ETHPG0_STATUS_FW_DWNLD_ENABLED (0x00000080)
+#define MPI2_ETHPG0_STATUS_TELNET_ENABLED (0x00000040)
+#define MPI2_ETHPG0_STATUS_SSH2_ENABLED (0x00000020)
+#define MPI2_ETHPG0_STATUS_DHCP_CLIENT_ENABLED (0x00000010)
+#define MPI2_ETHPG0_STATUS_IPV6_ENABLED (0x00000008)
+#define MPI2_ETHPG0_STATUS_IPV4_ENABLED (0x00000004)
+#define MPI2_ETHPG0_STATUS_IPV6_ADDRESSES (0x00000002)
+#define MPI2_ETHPG0_STATUS_ETH_IF_ENABLED (0x00000001)
+
+/* values for Ethernet Page 0 MediaState field */
+#define MPI2_ETHPG0_MS_DUPLEX_MASK (0x80)
+#define MPI2_ETHPG0_MS_HALF_DUPLEX (0x00)
+#define MPI2_ETHPG0_MS_FULL_DUPLEX (0x80)
+
+#define MPI2_ETHPG0_MS_CONNECT_SPEED_MASK (0x07)
+#define MPI2_ETHPG0_MS_NOT_CONNECTED (0x00)
+#define MPI2_ETHPG0_MS_10MBIT (0x01)
+#define MPI2_ETHPG0_MS_100MBIT (0x02)
+#define MPI2_ETHPG0_MS_1GBIT (0x03)
+
+
+/* Ethernet Page 1 */
+
+typedef struct _MPI2_CONFIG_PAGE_ETHERNET_1 {
+ MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
+ U32 Reserved0; /* 0x08 */
+ U32 Flags; /* 0x0C */
+ U8 MediaState; /* 0x10 */
+ U8 Reserved1; /* 0x11 */
+ U16 Reserved2; /* 0x12 */
+ U8 MacAddress[6]; /* 0x14 */
+ U8 Reserved3; /* 0x1A */
+ U8 Reserved4; /* 0x1B */
+ MPI2_ETHERNET_IP_ADDR StaticIpAddress; /* 0x1C */
+ MPI2_ETHERNET_IP_ADDR StaticSubnetMask; /* 0x2C */
+ MPI2_ETHERNET_IP_ADDR StaticGatewayIpAddress; /* 0x3C */
+ MPI2_ETHERNET_IP_ADDR StaticDNS1IpAddress; /* 0x4C */
+ MPI2_ETHERNET_IP_ADDR StaticDNS2IpAddress; /* 0x5C */
+ U32 Reserved5; /* 0x6C */
+ U32 Reserved6; /* 0x70 */
+ U32 Reserved7; /* 0x74 */
+ U32 Reserved8; /* 0x78 */
+ U8 HostName
+ [MPI2_ETHERNET_HOST_NAME_LENGTH];/* 0x7C */
+} MPI2_CONFIG_PAGE_ETHERNET_1, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_ETHERNET_1,
+ Mpi2EthernetPage1_t, MPI2_POINTER pMpi2EthernetPage1_t;
+
+#define MPI2_ETHERNETPAGE1_PAGEVERSION (0x00)
+
+/* values for Ethernet Page 1 Flags field */
+#define MPI2_ETHPG1_FLAG_SET_DEFAULT_IF (0x00000100)
+#define MPI2_ETHPG1_FLAG_ENABLE_FW_DOWNLOAD (0x00000080)
+#define MPI2_ETHPG1_FLAG_ENABLE_TELNET (0x00000040)
+#define MPI2_ETHPG1_FLAG_ENABLE_SSH2 (0x00000020)
+#define MPI2_ETHPG1_FLAG_ENABLE_DHCP_CLIENT (0x00000010)
+#define MPI2_ETHPG1_FLAG_ENABLE_IPV6 (0x00000008)
+#define MPI2_ETHPG1_FLAG_ENABLE_IPV4 (0x00000004)
+#define MPI2_ETHPG1_FLAG_USE_IPV6_ADDRESSES (0x00000002)
+#define MPI2_ETHPG1_FLAG_ENABLE_ETH_IF (0x00000001)
+
+/* values for Ethernet Page 1 MediaState field */
+#define MPI2_ETHPG1_MS_DUPLEX_MASK (0x80)
+#define MPI2_ETHPG1_MS_HALF_DUPLEX (0x00)
+#define MPI2_ETHPG1_MS_FULL_DUPLEX (0x80)
+
+#define MPI2_ETHPG1_MS_DATA_RATE_MASK (0x07)
+#define MPI2_ETHPG1_MS_DATA_RATE_AUTO (0x00)
+#define MPI2_ETHPG1_MS_DATA_RATE_10MBIT (0x01)
+#define MPI2_ETHPG1_MS_DATA_RATE_100MBIT (0x02)
+#define MPI2_ETHPG1_MS_DATA_RATE_1GBIT (0x03)
+
+
#endif
diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_ioc.h b/drivers/scsi/mpt2sas/mpi/mpi2_ioc.h
index c294128..ea51ce8 100644
--- a/drivers/scsi/mpt2sas/mpi/mpi2_ioc.h
+++ b/drivers/scsi/mpt2sas/mpi/mpi2_ioc.h
@@ -6,7 +6,7 @@
* Title: MPI IOC, Port, Event, FW Download, and FW Upload messages
* Creation Date: October 11, 2006
*
- * mpi2_ioc.h Version: 02.00.11
+ * mpi2_ioc.h Version: 02.00.12
*
* Version History
* ---------------
@@ -84,6 +84,9 @@
* Added two new reason codes for SAS Device Status Change
* Event.
* Added new event: SAS PHY Counter.
+ * 07-30-09 02.00.12 Added GPIO Interrupt event define and structure.
+ * Added MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER define.
+ * Added new product id family for 2208.
* --------------------------------------------------------------------------
*/
@@ -274,6 +277,7 @@
#define MPI2_IOCFACTS_CAPABILITY_MULTICAST (0x00000100)
#define MPI2_IOCFACTS_CAPABILITY_BIDIRECTIONAL_TARGET (0x00000080)
#define MPI2_IOCFACTS_CAPABILITY_EEDP (0x00000040)
+#define MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER (0x00000020)
#define MPI2_IOCFACTS_CAPABILITY_SNAPSHOT_BUFFER (0x00000010)
#define MPI2_IOCFACTS_CAPABILITY_DIAG_TRACE_BUFFER (0x00000008)
#define MPI2_IOCFACTS_CAPABILITY_TASK_SET_FULL_HANDLING (0x00000004)
@@ -448,6 +452,7 @@
#define MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST (0x0020)
#define MPI2_EVENT_LOG_ENTRY_ADDED (0x0021)
#define MPI2_EVENT_SAS_PHY_COUNTER (0x0022)
+#define MPI2_EVENT_GPIO_INTERRUPT (0x0023)
/* Log Entry Added Event data */
@@ -469,6 +474,16 @@
MPI2_POINTER PTR_MPI2_EVENT_DATA_LOG_ENTRY_ADDED,
Mpi2EventDataLogEntryAdded_t, MPI2_POINTER pMpi2EventDataLogEntryAdded_t;
+/* GPIO Interrupt Event data */
+
+typedef struct _MPI2_EVENT_DATA_GPIO_INTERRUPT {
+ U8 GPIONum; /* 0x00 */
+ U8 Reserved1; /* 0x01 */
+ U16 Reserved2; /* 0x02 */
+} MPI2_EVENT_DATA_GPIO_INTERRUPT,
+ MPI2_POINTER PTR_MPI2_EVENT_DATA_GPIO_INTERRUPT,
+ Mpi2EventDataGpioInterrupt_t, MPI2_POINTER pMpi2EventDataGpioInterrupt_t;
+
/* Hard Reset Received Event data */
typedef struct _MPI2_EVENT_DATA_HARD_RESET_RECEIVED
@@ -1117,6 +1132,7 @@
#define MPI2_FW_HEADER_PID_FAMILY_MASK (0x00FF)
/* SAS */
#define MPI2_FW_HEADER_PID_FAMILY_2108_SAS (0x0010)
+#define MPI2_FW_HEADER_PID_FAMILY_2208_SAS (0x0011)
/* use MPI2_IOCFACTS_PROTOCOL_ defines for ProtocolFlags field */
diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_raid.h b/drivers/scsi/mpt2sas/mpi/mpi2_raid.h
index 7134816..5160c33 100644
--- a/drivers/scsi/mpt2sas/mpi/mpi2_raid.h
+++ b/drivers/scsi/mpt2sas/mpi/mpi2_raid.h
@@ -6,7 +6,7 @@
* Title: MPI Integrated RAID messages and structures
* Creation Date: April 26, 2007
*
- * mpi2_raid.h Version: 02.00.03
+ * mpi2_raid.h Version: 02.00.04
*
* Version History
* ---------------
@@ -20,6 +20,8 @@
* 05-21-08 02.00.03 Added MPI2_RAID_VOL_CREATION_NUM_PHYSDISKS so that
* the PhysDisk array in MPI2_RAID_VOLUME_CREATION_STRUCT
* can be sized by the build environment.
+ * 07-30-09 02.00.04 Added proper define for the Use Default Settings bit of
+ * VolumeCreationFlags and marked the old one as obsolete.
* --------------------------------------------------------------------------
*/
@@ -217,10 +219,14 @@
/* use MPI2_RAID_VOL_TYPE_ defines from mpi2_cnfg.h for VolumeType */
/* defines for the VolumeCreationFlags field */
+#define MPI2_RAID_VOL_CREATION_DEFAULT_SETTINGS (0x80000000)
+#define MPI2_RAID_VOL_CREATION_BACKGROUND_INIT (0x00000004)
+#define MPI2_RAID_VOL_CREATION_LOW_LEVEL_INIT (0x00000002)
+#define MPI2_RAID_VOL_CREATION_MIGRATE_DATA (0x00000001)
+/* The following is an obsolete define.
+ * It must be shifted left 24 bits in order to set the proper bit.
+ */
#define MPI2_RAID_VOL_CREATION_USE_DEFAULT_SETTINGS (0x80)
-#define MPI2_RAID_VOL_CREATION_BACKGROUND_INIT (0x04)
-#define MPI2_RAID_VOL_CREATION_LOW_LEVEL_INIT (0x02)
-#define MPI2_RAID_VOL_CREATION_MIGRATE_DATA (0x01)
/* RAID Online Capacity Expansion Structure */
diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_tool.h b/drivers/scsi/mpt2sas/mpi/mpi2_tool.h
index 007e950..73fcdbf 100644
--- a/drivers/scsi/mpt2sas/mpi/mpi2_tool.h
+++ b/drivers/scsi/mpt2sas/mpi/mpi2_tool.h
@@ -6,7 +6,7 @@
* Title: MPI diagnostic tool structures and definitions
* Creation Date: March 26, 2007
*
- * mpi2_tool.h Version: 02.00.03
+ * mpi2_tool.h Version: 02.00.04
*
* Version History
* ---------------
@@ -18,6 +18,10 @@
* structures and defines.
* 02-29-08 02.00.02 Modified various names to make them 32-character unique.
* 05-06-09 02.00.03 Added ISTWI Read Write Tool and Diagnostic CLI Tool.
+ * 07-30-09 02.00.04 Added ExtendedType field to DiagnosticBufferPost request
+ * and reply messages.
+ * Added MPI2_DIAG_BUF_TYPE_EXTENDED.
+ * Incremented MPI2_DIAG_BUF_TYPE_COUNT.
* --------------------------------------------------------------------------
*/
@@ -282,7 +286,7 @@
typedef struct _MPI2_DIAG_BUFFER_POST_REQUEST
{
- U8 Reserved1; /* 0x00 */
+ U8 ExtendedType; /* 0x00 */
U8 BufferType; /* 0x01 */
U8 ChainOffset; /* 0x02 */
U8 Function; /* 0x03 */
@@ -301,11 +305,15 @@
} MPI2_DIAG_BUFFER_POST_REQUEST, MPI2_POINTER PTR_MPI2_DIAG_BUFFER_POST_REQUEST,
Mpi2DiagBufferPostRequest_t, MPI2_POINTER pMpi2DiagBufferPostRequest_t;
+/* values for the ExtendedType field */
+#define MPI2_DIAG_EXTENDED_TYPE_UTILIZATION (0x02)
+
/* values for the BufferType field */
#define MPI2_DIAG_BUF_TYPE_TRACE (0x00)
#define MPI2_DIAG_BUF_TYPE_SNAPSHOT (0x01)
+#define MPI2_DIAG_BUF_TYPE_EXTENDED (0x02)
/* count of the number of buffer types */
-#define MPI2_DIAG_BUF_TYPE_COUNT (0x02)
+#define MPI2_DIAG_BUF_TYPE_COUNT (0x03)
/****************************************************************************
@@ -314,7 +322,7 @@
typedef struct _MPI2_DIAG_BUFFER_POST_REPLY
{
- U8 Reserved1; /* 0x00 */
+ U8 ExtendedType; /* 0x00 */
U8 BufferType; /* 0x01 */
U8 MsgLength; /* 0x02 */
U8 Function; /* 0x03 */
diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c
index 670241e..6422e25 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_base.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.c
@@ -57,6 +57,7 @@
#include <linux/dma-mapping.h>
#include <linux/sort.h>
#include <linux/io.h>
+#include <linux/time.h>
#include "mpt2sas_base.h"
@@ -77,6 +78,44 @@
module_param(msix_disable, int, 0);
MODULE_PARM_DESC(msix_disable, " disable msix routed interrupts (default=0)");
+/* diag_buffer_enable is bitwise
+ * bit 0 set = TRACE
+ * bit 1 set = SNAPSHOT
+ * bit 2 set = EXTENDED
+ *
+ * Either bit can be set, or both
+ */
+static int diag_buffer_enable;
+module_param(diag_buffer_enable, int, 0);
+MODULE_PARM_DESC(diag_buffer_enable, " post diag buffers "
+ "(TRACE=1/SNAPSHOT=2/EXTENDED=4/default=0)");
+
+int mpt2sas_fwfault_debug;
+MODULE_PARM_DESC(mpt2sas_fwfault_debug, " enable detection of firmware fault "
+ "and halt firmware - (default=0)");
+
+/**
+ * _scsih_set_fwfault_debug - global setting of ioc->fwfault_debug.
+ *
+ */
+static int
+_scsih_set_fwfault_debug(const char *val, struct kernel_param *kp)
+{
+ int ret = param_set_int(val, kp);
+ struct MPT2SAS_ADAPTER *ioc;
+
+ if (ret)
+ return ret;
+
+ printk(KERN_INFO "setting logging_level(0x%08x)\n",
+ mpt2sas_fwfault_debug);
+ list_for_each_entry(ioc, &mpt2sas_ioc_list, list)
+ ioc->fwfault_debug = mpt2sas_fwfault_debug;
+ return 0;
+}
+module_param_call(mpt2sas_fwfault_debug, _scsih_set_fwfault_debug,
+ param_get_int, &mpt2sas_fwfault_debug, 0644);
+
/**
* _base_fault_reset_work - workq handling ioc fault conditions
* @work: input argument, used to derive ioc
@@ -121,7 +160,7 @@
/**
* mpt2sas_base_start_watchdog - start the fault_reset_work_q
- * @ioc: pointer to scsi command object
+ * @ioc: per adapter object
* Context: sleep.
*
* Return nothing.
@@ -155,7 +194,7 @@
/**
* mpt2sas_base_stop_watchdog - stop the fault_reset_work_q
- * @ioc: pointer to scsi command object
+ * @ioc: per adapter object
* Context: sleep.
*
* Return nothing.
@@ -177,10 +216,55 @@
}
}
+/**
+ * mpt2sas_base_fault_info - verbose translation of firmware FAULT code
+ * @ioc: per adapter object
+ * @fault_code: fault code
+ *
+ * Return nothing.
+ */
+void
+mpt2sas_base_fault_info(struct MPT2SAS_ADAPTER *ioc , u16 fault_code)
+{
+ printk(MPT2SAS_ERR_FMT "fault_state(0x%04x)!\n",
+ ioc->name, fault_code);
+}
+
+/**
+ * mpt2sas_halt_firmware - halt's mpt controller firmware
+ * @ioc: per adapter object
+ *
+ * For debugging timeout related issues. Writing 0xCOFFEE00
+ * to the doorbell register will halt controller firmware. With
+ * the purpose to stop both driver and firmware, the enduser can
+ * obtain a ring buffer from controller UART.
+ */
+void
+mpt2sas_halt_firmware(struct MPT2SAS_ADAPTER *ioc)
+{
+ u32 doorbell;
+
+ if (!ioc->fwfault_debug)
+ return;
+
+ dump_stack();
+
+ doorbell = readl(&ioc->chip->Doorbell);
+ if ((doorbell & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT)
+ mpt2sas_base_fault_info(ioc , doorbell);
+ else {
+ writel(0xC0FFEE00, &ioc->chip->Doorbell);
+ printk(MPT2SAS_ERR_FMT "Firmware is halted due to command "
+ "timeout\n", ioc->name);
+ }
+
+ panic("panic in %s\n", __func__);
+}
+
#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
/**
* _base_sas_ioc_info - verbose translation of the ioc status
- * @ioc: pointer to scsi command object
+ * @ioc: per adapter object
* @mpi_reply: reply mf payload returned from firmware
* @request_hdr: request mf
*
@@ -394,7 +478,7 @@
/**
* _base_display_event_data - verbose translation of firmware asyn events
- * @ioc: pointer to scsi command object
+ * @ioc: per adapter object
* @mpi_reply: reply mf payload returned from firmware
*
* Return nothing.
@@ -474,7 +558,7 @@
/**
* _base_sas_log_info - verbose translation of firmware log info
- * @ioc: pointer to scsi command object
+ * @ioc: per adapter object
* @log_info: log info
*
* Return nothing.
@@ -526,22 +610,8 @@
}
/**
- * mpt2sas_base_fault_info - verbose translation of firmware FAULT code
- * @ioc: pointer to scsi command object
- * @fault_code: fault code
- *
- * Return nothing.
- */
-void
-mpt2sas_base_fault_info(struct MPT2SAS_ADAPTER *ioc , u16 fault_code)
-{
- printk(MPT2SAS_ERR_FMT "fault_state(0x%04x)!\n",
- ioc->name, fault_code);
-}
-
-/**
* _base_display_reply_info -
- * @ioc: pointer to scsi command object
+ * @ioc: per adapter object
* @smid: system request message index
* @msix_index: MSIX table index supplied by the OS
* @reply: reply message frame(lower 32bit addr)
@@ -570,7 +640,7 @@
/**
* mpt2sas_base_done - base internal command completion routine
- * @ioc: pointer to scsi command object
+ * @ioc: per adapter object
* @smid: system request message index
* @msix_index: MSIX table index supplied by the OS
* @reply: reply message frame(lower 32bit addr)
@@ -603,7 +673,7 @@
/**
* _base_async_event - main callback handler for firmware asyn events
- * @ioc: pointer to scsi command object
+ * @ioc: per adapter object
* @msix_index: MSIX table index supplied by the OS
* @reply: reply message frame(lower 32bit addr)
*
@@ -684,7 +754,7 @@
/**
* _base_mask_interrupts - disable interrupts
- * @ioc: pointer to scsi command object
+ * @ioc: per adapter object
*
* Disabling ResetIRQ, Reply and Doorbell Interrupts
*
@@ -704,7 +774,7 @@
/**
* _base_unmask_interrupts - enable interrupts
- * @ioc: pointer to scsi command object
+ * @ioc: per adapter object
*
* Enabling only Reply Interrupts
*
@@ -1258,12 +1328,13 @@
* @ioc: per adapter object
* @smid: system request message index
*
- * Returns phys pointer to sense buffer.
+ * Returns phys pointer to the low 32bit address of the sense buffer.
*/
-dma_addr_t
+__le32
mpt2sas_base_get_sense_buffer_dma(struct MPT2SAS_ADAPTER *ioc, u16 smid)
{
- return ioc->sense_dma + ((smid - 1) * SCSI_SENSE_BUFFERSIZE);
+ return cpu_to_le32(ioc->sense_dma +
+ ((smid - 1) * SCSI_SENSE_BUFFERSIZE));
}
/**
@@ -1697,6 +1768,12 @@
}
if (ioc->facts.IOCCapabilities &
+ MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER) {
+ printk(KERN_INFO "%sDiag Extended Buffer", i ? "," : "");
+ i++;
+ }
+
+ if (ioc->facts.IOCCapabilities &
MPI2_IOCFACTS_CAPABILITY_TASK_SET_FULL_HANDLING) {
printk("%sTask Set Full", i ? "," : "");
i++;
@@ -2871,6 +2948,8 @@
Mpi2IOCInitRequest_t mpi_request;
Mpi2IOCInitReply_t mpi_reply;
int r;
+ struct timeval current_time;
+ u16 ioc_status;
dinitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name,
__func__));
@@ -2921,6 +3000,13 @@
cpu_to_le32(ioc->reply_post_free_dma);
#endif
+ /* This time stamp specifies number of milliseconds
+ * since epoch ~ midnight January 1, 1970.
+ */
+ do_gettimeofday(¤t_time);
+ mpi_request.TimeStamp = (current_time.tv_sec * 1000) +
+ (current_time.tv_usec >> 3);
+
if (ioc->logging_level & MPT_DEBUG_INIT) {
u32 *mfp;
int i;
@@ -2943,7 +3029,8 @@
return r;
}
- if (mpi_reply.IOCStatus != MPI2_IOCSTATUS_SUCCESS ||
+ ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK;
+ if (ioc_status != MPI2_IOCSTATUS_SUCCESS ||
mpi_reply.IOCLogInfo) {
printk(MPT2SAS_ERR_FMT "%s: failed\n", ioc->name, __func__);
r = -EIO;
@@ -3461,11 +3548,11 @@
return r;
pci_set_drvdata(ioc->pdev, ioc->shost);
- r = _base_make_ioc_ready(ioc, CAN_SLEEP, SOFT_RESET);
+ r = _base_get_ioc_facts(ioc, CAN_SLEEP);
if (r)
goto out_free_resources;
- r = _base_get_ioc_facts(ioc, CAN_SLEEP);
+ r = _base_make_ioc_ready(ioc, CAN_SLEEP, SOFT_RESET);
if (r)
goto out_free_resources;
@@ -3531,6 +3618,8 @@
goto out_free_resources;
mpt2sas_base_start_watchdog(ioc);
+ if (diag_buffer_enable != 0)
+ mpt2sas_enable_diag_buffer(ioc, diag_buffer_enable);
return 0;
out_free_resources:
@@ -3684,6 +3773,9 @@
dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: enter\n", ioc->name,
__func__));
+ if (mpt2sas_fwfault_debug)
+ mpt2sas_halt_firmware(ioc);
+
spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
if (ioc->shost_recovery) {
spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.h b/drivers/scsi/mpt2sas/mpt2sas_base.h
index 0cf6bc2..bb4f146 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_base.h
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.h
@@ -69,8 +69,8 @@
#define MPT2SAS_DRIVER_NAME "mpt2sas"
#define MPT2SAS_AUTHOR "LSI Corporation <DL-MPTFusionLinux@lsi.com>"
#define MPT2SAS_DESCRIPTION "LSI MPT Fusion SAS 2.0 Device Driver"
-#define MPT2SAS_DRIVER_VERSION "02.100.03.00"
-#define MPT2SAS_MAJOR_VERSION 02
+#define MPT2SAS_DRIVER_VERSION "03.100.03.00"
+#define MPT2SAS_MAJOR_VERSION 03
#define MPT2SAS_MINOR_VERSION 100
#define MPT2SAS_BUILD_VERSION 03
#define MPT2SAS_RELEASE_VERSION 00
@@ -278,7 +278,7 @@
* @sas_address: device sas address
* @device_name: retrieved from the SAS IDENTIFY frame.
* @handle: device handle
- * @parent_handle: handle to parent device
+ * @sas_address_parent: sas address of parent expander or sas host
* @enclosure_handle: enclosure handle
* @enclosure_logical_id: enclosure logical identifier
* @volume_handle: volume handle (valid when hidden raid member)
@@ -296,7 +296,7 @@
u64 sas_address;
u64 device_name;
u16 handle;
- u16 parent_handle;
+ u64 sas_address_parent;
u16 enclosure_handle;
u64 enclosure_logical_id;
u16 volume_handle;
@@ -352,8 +352,6 @@
/**
* struct _sas_port - wide/narrow sas port information
* @port_list: list of ports belonging to expander
- * @handle: device handle for this port
- * @sas_address: sas address of this port
* @num_phys: number of phys belonging to this port
* @remote_identify: attached device identification
* @rphy: sas transport rphy object
@@ -362,8 +360,6 @@
*/
struct _sas_port {
struct list_head port_list;
- u16 handle;
- u64 sas_address;
u8 num_phys;
struct sas_identify remote_identify;
struct sas_rphy *rphy;
@@ -398,7 +394,7 @@
* @num_phys: number phys belonging to this sas_host/expander
* @sas_address: sas address of this sas_host/expander
* @handle: handle for this sas_host/expander
- * @parent_handle: parent handle
+ * @sas_address_parent: sas address of parent expander or sas host
* @enclosure_handle: handle for this a member of an enclosure
* @device_info: bitwise defining capabilities of this sas_host/expander
* @responding: used in _scsih_expander_device_mark_responding
@@ -411,7 +407,7 @@
u8 num_phys;
u64 sas_address;
u16 handle;
- u16 parent_handle;
+ u64 sas_address_parent;
u16 enclosure_handle;
u64 enclosure_logical_id;
u8 responding;
@@ -470,6 +466,7 @@
* @chip_phys: physical addrss prior to mapping
* @pio_chip: I/O mapped register space
* @logging_level: see mpt2sas_debug.h
+ * @fwfault_debug: debuging FW timeouts
* @ir_firmware: IR firmware present
* @bars: bitmask of BAR's that must be configured
* @mask_interrupts: ignore interrupt
@@ -495,12 +492,14 @@
* @msix_table_backup: backup msix table
* @scsi_io_cb_idx: shost generated commands
* @tm_cb_idx: task management commands
+ * @scsih_cb_idx: scsih internal commands
* @transport_cb_idx: transport internal commands
* @ctl_cb_idx: clt internal commands
* @base_cb_idx: base internal commands
* @config_cb_idx: base internal commands
* @base_cmds:
* @transport_cmds:
+ * @scsih_cmds:
* @tm_cmds:
* @ctl_cmds:
* @config_cmds:
@@ -591,6 +590,7 @@
unsigned long chip_phys;
unsigned long pio_chip;
int logging_level;
+ int fwfault_debug;
u8 ir_firmware;
int bars;
u8 mask_interrupts;
@@ -626,6 +626,7 @@
u8 scsi_io_cb_idx;
u8 tm_cb_idx;
u8 transport_cb_idx;
+ u8 scsih_cb_idx;
u8 ctl_cb_idx;
u8 base_cb_idx;
u8 config_cb_idx;
@@ -633,6 +634,7 @@
u8 tm_sas_control_cb_idx;
struct _internal_cmd base_cmds;
struct _internal_cmd transport_cmds;
+ struct _internal_cmd scsih_cmds;
struct _internal_cmd tm_cmds;
struct _internal_cmd ctl_cmds;
struct _internal_cmd config_cmds;
@@ -773,7 +775,7 @@
void *mpt2sas_base_get_msg_frame(struct MPT2SAS_ADAPTER *ioc, u16 smid);
void *mpt2sas_base_get_sense_buffer(struct MPT2SAS_ADAPTER *ioc, u16 smid);
void mpt2sas_base_build_zero_len_sge(struct MPT2SAS_ADAPTER *ioc, void *paddr);
-dma_addr_t mpt2sas_base_get_sense_buffer_dma(struct MPT2SAS_ADAPTER *ioc,
+__le32 mpt2sas_base_get_sense_buffer_dma(struct MPT2SAS_ADAPTER *ioc,
u16 smid);
/* hi-priority queue */
@@ -807,6 +809,8 @@
Mpi2SepReply_t *mpi_reply, Mpi2SepRequest_t *mpi_request);
void mpt2sas_base_validate_event_type(struct MPT2SAS_ADAPTER *ioc, u32 *event_type);
+void mpt2sas_halt_firmware(struct MPT2SAS_ADAPTER *ioc);
+
/* scsih shared API */
u8 mpt2sas_scsih_event_callback(struct MPT2SAS_ADAPTER *ioc, u8 msix_index,
u32 reply);
@@ -886,19 +890,22 @@
void mpt2sas_ctl_add_to_event_log(struct MPT2SAS_ADAPTER *ioc,
Mpi2EventNotificationReply_t *mpi_reply);
+void mpt2sas_enable_diag_buffer(struct MPT2SAS_ADAPTER *ioc,
+ u8 bits_to_regsiter);
+
/* transport shared API */
u8 mpt2sas_transport_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
u32 reply);
struct _sas_port *mpt2sas_transport_port_add(struct MPT2SAS_ADAPTER *ioc,
- u16 handle, u16 parent_handle);
+ u16 handle, u64 sas_address);
void mpt2sas_transport_port_remove(struct MPT2SAS_ADAPTER *ioc, u64 sas_address,
- u16 parent_handle);
+ u64 sas_address_parent);
int mpt2sas_transport_add_host_phy(struct MPT2SAS_ADAPTER *ioc, struct _sas_phy
*mpt2sas_phy, Mpi2SasPhyPage0_t phy_pg0, struct device *parent_dev);
int mpt2sas_transport_add_expander_phy(struct MPT2SAS_ADAPTER *ioc, struct _sas_phy
*mpt2sas_phy, Mpi2ExpanderPage1_t expander_pg1, struct device *parent_dev);
-void mpt2sas_transport_update_links(struct MPT2SAS_ADAPTER *ioc, u16 handle,
- u16 attached_handle, u8 phy_number, u8 link_rate);
+void mpt2sas_transport_update_links(struct MPT2SAS_ADAPTER *ioc,
+ u64 sas_address, u16 handle, u8 phy_number, u8 link_rate);
extern struct sas_function_template mpt2sas_transport_functions;
extern struct scsi_transport_template *mpt2sas_transport_template;
extern int scsi_internal_device_block(struct scsi_device *sdev);
diff --git a/drivers/scsi/mpt2sas/mpt2sas_ctl.c b/drivers/scsi/mpt2sas/mpt2sas_ctl.c
index 57d7246..84a124f 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_ctl.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_ctl.c
@@ -740,7 +740,7 @@
Mpi2SCSIIORequest_t *scsiio_request =
(Mpi2SCSIIORequest_t *)mpi_request;
scsiio_request->SenseBufferLowAddress =
- (u32)mpt2sas_base_get_sense_buffer_dma(ioc, smid);
+ mpt2sas_base_get_sense_buffer_dma(ioc, smid);
priv_sense = mpt2sas_base_get_sense_buffer(ioc, smid);
memset(priv_sense, 0, SCSI_SENSE_BUFFERSIZE);
mpt2sas_base_put_smid_scsi_io(ioc, smid,
@@ -848,8 +848,9 @@
printk(MPT2SAS_DEBUG_FMT "TASK_MGMT: "
"IOCStatus(0x%04x), IOCLogInfo(0x%08x), "
"TerminationCount(0x%08x)\n", ioc->name,
- tm_reply->IOCStatus, tm_reply->IOCLogInfo,
- tm_reply->TerminationCount);
+ le16_to_cpu(tm_reply->IOCStatus),
+ le32_to_cpu(tm_reply->IOCLogInfo),
+ le32_to_cpu(tm_reply->TerminationCount));
}
#endif
/* copy out xdata to user */
@@ -896,6 +897,7 @@
printk(MPT2SAS_INFO_FMT "issue target reset: handle "
"= (0x%04x)\n", ioc->name,
mpi_request->FunctionDependent1);
+ mpt2sas_halt_firmware(ioc);
mutex_lock(&ioc->tm_cmds.mutex);
mpt2sas_scsih_issue_tm(ioc,
mpi_request->FunctionDependent1, 0,
@@ -1229,7 +1231,7 @@
/**
* _ctl_diag_capability - return diag buffer capability
* @ioc: per adapter object
- * @buffer_type: specifies either TRACE or SNAPSHOT
+ * @buffer_type: specifies either TRACE, SNAPSHOT, or EXTENDED
*
* returns 1 when diag buffer support is enabled in firmware
*/
@@ -1249,24 +1251,25 @@
MPI2_IOCFACTS_CAPABILITY_SNAPSHOT_BUFFER)
rc = 1;
break;
+ case MPI2_DIAG_BUF_TYPE_EXTENDED:
+ if (ioc->facts.IOCCapabilities &
+ MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER)
+ rc = 1;
}
return rc;
}
/**
- * _ctl_diag_register - application register with driver
- * @arg - user space buffer containing ioctl content
- * @state - NON_BLOCKING or BLOCKING
+ * _ctl_diag_register_2 - wrapper for registering diag buffer support
+ * @ioc: per adapter object
+ * @diag_register: the diag_register struct passed in from user space
*
- * This will allow the driver to setup any required buffers that will be
- * needed by firmware to communicate with the driver.
*/
static long
-_ctl_diag_register(void __user *arg, enum block_state state)
+_ctl_diag_register_2(struct MPT2SAS_ADAPTER *ioc,
+ struct mpt2_diag_register *diag_register)
{
- struct mpt2_diag_register karg;
- struct MPT2SAS_ADAPTER *ioc;
int rc, i;
void *request_data = NULL;
dma_addr_t request_data_dma;
@@ -1279,18 +1282,17 @@
u16 ioc_status;
u8 issue_reset = 0;
- if (copy_from_user(&karg, arg, sizeof(karg))) {
- printk(KERN_ERR "failure at %s:%d/%s()!\n",
- __FILE__, __LINE__, __func__);
- return -EFAULT;
- }
- if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || !ioc)
- return -ENODEV;
-
dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name,
__func__));
- buffer_type = karg.buffer_type;
+ if (ioc->ctl_cmds.status != MPT2_CMD_NOT_USED) {
+ printk(MPT2SAS_ERR_FMT "%s: ctl_cmd in use\n",
+ ioc->name, __func__);
+ rc = -EAGAIN;
+ goto out;
+ }
+
+ buffer_type = diag_register->buffer_type;
if (!_ctl_diag_capability(ioc, buffer_type)) {
printk(MPT2SAS_ERR_FMT "%s: doesn't have capability for "
"buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type);
@@ -1305,24 +1307,12 @@
return -EINVAL;
}
- if (karg.requested_buffer_size % 4) {
+ if (diag_register->requested_buffer_size % 4) {
printk(MPT2SAS_ERR_FMT "%s: the requested_buffer_size "
"is not 4 byte aligned\n", ioc->name, __func__);
return -EINVAL;
}
- if (state == NON_BLOCKING && !mutex_trylock(&ioc->ctl_cmds.mutex))
- return -EAGAIN;
- else if (mutex_lock_interruptible(&ioc->ctl_cmds.mutex))
- return -ERESTARTSYS;
-
- if (ioc->ctl_cmds.status != MPT2_CMD_NOT_USED) {
- printk(MPT2SAS_ERR_FMT "%s: ctl_cmd in use\n",
- ioc->name, __func__);
- rc = -EAGAIN;
- goto out;
- }
-
smid = mpt2sas_base_get_smid(ioc, ioc->ctl_cb_idx);
if (!smid) {
printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
@@ -1338,12 +1328,12 @@
ioc->ctl_cmds.smid = smid;
request_data = ioc->diag_buffer[buffer_type];
- request_data_sz = karg.requested_buffer_size;
- ioc->unique_id[buffer_type] = karg.unique_id;
+ request_data_sz = diag_register->requested_buffer_size;
+ ioc->unique_id[buffer_type] = diag_register->unique_id;
ioc->diag_buffer_status[buffer_type] = 0;
- memcpy(ioc->product_specific[buffer_type], karg.product_specific,
- MPT2_PRODUCT_SPECIFIC_DWORDS);
- ioc->diagnostic_flags[buffer_type] = karg.diagnostic_flags;
+ memcpy(ioc->product_specific[buffer_type],
+ diag_register->product_specific, MPT2_PRODUCT_SPECIFIC_DWORDS);
+ ioc->diagnostic_flags[buffer_type] = diag_register->diagnostic_flags;
if (request_data) {
request_data_dma = ioc->diag_buffer_dma[buffer_type];
@@ -1373,8 +1363,8 @@
}
mpi_request->Function = MPI2_FUNCTION_DIAG_BUFFER_POST;
- mpi_request->BufferType = karg.buffer_type;
- mpi_request->Flags = cpu_to_le32(karg.diagnostic_flags);
+ mpi_request->BufferType = diag_register->buffer_type;
+ mpi_request->Flags = cpu_to_le32(diag_register->diagnostic_flags);
mpi_request->BufferAddress = cpu_to_le64(request_data_dma);
mpi_request->BufferLength = cpu_to_le32(request_data_sz);
mpi_request->VF_ID = 0; /* TODO */
@@ -1422,7 +1412,7 @@
} else {
printk(MPT2SAS_DEBUG_FMT "%s: ioc_status(0x%04x) "
"log_info(0x%08x)\n", ioc->name, __func__,
- ioc_status, mpi_reply->IOCLogInfo);
+ ioc_status, le32_to_cpu(mpi_reply->IOCLogInfo));
rc = -EFAULT;
}
@@ -1438,6 +1428,83 @@
request_data, request_data_dma);
ioc->ctl_cmds.status = MPT2_CMD_NOT_USED;
+ return rc;
+}
+
+/**
+ * mpt2sas_enable_diag_buffer - enabling diag_buffers support driver load time
+ * @ioc: per adapter object
+ * @bits_to_register: bitwise field where trace is bit 0, and snapshot is bit 1
+ *
+ * This is called when command line option diag_buffer_enable is enabled
+ * at driver load time.
+ */
+void
+mpt2sas_enable_diag_buffer(struct MPT2SAS_ADAPTER *ioc, u8 bits_to_register)
+{
+ struct mpt2_diag_register diag_register;
+
+ memset(&diag_register, 0, sizeof(struct mpt2_diag_register));
+
+ if (bits_to_register & 1) {
+ printk(MPT2SAS_INFO_FMT "registering trace buffer support\n",
+ ioc->name);
+ diag_register.buffer_type = MPI2_DIAG_BUF_TYPE_TRACE;
+ /* register for 1MB buffers */
+ diag_register.requested_buffer_size = (1024 * 1024);
+ diag_register.unique_id = 0x7075900;
+ _ctl_diag_register_2(ioc, &diag_register);
+ }
+
+ if (bits_to_register & 2) {
+ printk(MPT2SAS_INFO_FMT "registering snapshot buffer support\n",
+ ioc->name);
+ diag_register.buffer_type = MPI2_DIAG_BUF_TYPE_SNAPSHOT;
+ /* register for 2MB buffers */
+ diag_register.requested_buffer_size = 2 * (1024 * 1024);
+ diag_register.unique_id = 0x7075901;
+ _ctl_diag_register_2(ioc, &diag_register);
+ }
+
+ if (bits_to_register & 4) {
+ printk(MPT2SAS_INFO_FMT "registering extended buffer support\n",
+ ioc->name);
+ diag_register.buffer_type = MPI2_DIAG_BUF_TYPE_EXTENDED;
+ /* register for 2MB buffers */
+ diag_register.requested_buffer_size = 2 * (1024 * 1024);
+ diag_register.unique_id = 0x7075901;
+ _ctl_diag_register_2(ioc, &diag_register);
+ }
+}
+
+/**
+ * _ctl_diag_register - application register with driver
+ * @arg - user space buffer containing ioctl content
+ * @state - NON_BLOCKING or BLOCKING
+ *
+ * This will allow the driver to setup any required buffers that will be
+ * needed by firmware to communicate with the driver.
+ */
+static long
+_ctl_diag_register(void __user *arg, enum block_state state)
+{
+ struct mpt2_diag_register karg;
+ struct MPT2SAS_ADAPTER *ioc;
+ long rc;
+
+ if (copy_from_user(&karg, arg, sizeof(karg))) {
+ printk(KERN_ERR "failure at %s:%d/%s()!\n",
+ __FILE__, __LINE__, __func__);
+ return -EFAULT;
+ }
+ if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || !ioc)
+ return -ENODEV;
+
+ if (state == NON_BLOCKING && !mutex_trylock(&ioc->ctl_cmds.mutex))
+ return -EAGAIN;
+ else if (mutex_lock_interruptible(&ioc->ctl_cmds.mutex))
+ return -ERESTARTSYS;
+ rc = _ctl_diag_register_2(ioc, &karg);
mutex_unlock(&ioc->ctl_cmds.mutex);
return rc;
}
@@ -1600,7 +1667,7 @@
/**
* _ctl_send_release - Diag Release Message
* @ioc: per adapter object
- * @buffer_type - specifies either TRACE or SNAPSHOT
+ * @buffer_type - specifies either TRACE, SNAPSHOT, or EXTENDED
* @issue_reset - specifies whether host reset is required.
*
*/
@@ -1690,7 +1757,7 @@
} else {
printk(MPT2SAS_DEBUG_FMT "%s: ioc_status(0x%04x) "
"log_info(0x%08x)\n", ioc->name, __func__,
- ioc_status, mpi_reply->IOCLogInfo);
+ ioc_status, le32_to_cpu(mpi_reply->IOCLogInfo));
rc = -EFAULT;
}
@@ -1951,7 +2018,7 @@
} else {
printk(MPT2SAS_DEBUG_FMT "%s: ioc_status(0x%04x) "
"log_info(0x%08x)\n", ioc->name, __func__,
- ioc_status, mpi_reply->IOCLogInfo);
+ ioc_status, le32_to_cpu(mpi_reply->IOCLogInfo));
rc = -EFAULT;
}
@@ -2474,6 +2541,43 @@
static DEVICE_ATTR(logging_level, S_IRUGO | S_IWUSR,
_ctl_logging_level_show, _ctl_logging_level_store);
+/* device attributes */
+/*
+ * _ctl_fwfault_debug_show - show/store fwfault_debug
+ * @cdev - pointer to embedded class device
+ * @buf - the buffer returned
+ *
+ * mpt2sas_fwfault_debug is command line option
+ * A sysfs 'read/write' shost attribute.
+ */
+static ssize_t
+_ctl_fwfault_debug_show(struct device *cdev,
+ struct device_attribute *attr, char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(cdev);
+ struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
+
+ return snprintf(buf, PAGE_SIZE, "%d\n", ioc->fwfault_debug);
+}
+static ssize_t
+_ctl_fwfault_debug_store(struct device *cdev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct Scsi_Host *shost = class_to_shost(cdev);
+ struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
+ int val = 0;
+
+ if (sscanf(buf, "%d", &val) != 1)
+ return -EINVAL;
+
+ ioc->fwfault_debug = val;
+ printk(MPT2SAS_INFO_FMT "fwfault_debug=%d\n", ioc->name,
+ ioc->fwfault_debug);
+ return strlen(buf);
+}
+static DEVICE_ATTR(fwfault_debug, S_IRUGO | S_IWUSR,
+ _ctl_fwfault_debug_show, _ctl_fwfault_debug_store);
+
struct device_attribute *mpt2sas_host_attrs[] = {
&dev_attr_version_fw,
&dev_attr_version_bios,
@@ -2487,13 +2591,12 @@
&dev_attr_io_delay,
&dev_attr_device_delay,
&dev_attr_logging_level,
+ &dev_attr_fwfault_debug,
&dev_attr_fw_queue_depth,
&dev_attr_host_sas_address,
NULL,
};
-/* device attributes */
-
/**
* _ctl_device_sas_address_show - sas address
* @cdev - pointer to embedded class device
diff --git a/drivers/scsi/mpt2sas/mpt2sas_ctl.h b/drivers/scsi/mpt2sas/mpt2sas_ctl.h
index 211f296..8a5eeb1 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_ctl.h
+++ b/drivers/scsi/mpt2sas/mpt2sas_ctl.h
@@ -313,7 +313,7 @@
* struct mpt2_diag_register - application register with driver
* @hdr - generic header
* @reserved -
- * @buffer_type - specifies either TRACE or SNAPSHOT
+ * @buffer_type - specifies either TRACE, SNAPSHOT, or EXTENDED
* @application_flags - misc flags
* @diagnostic_flags - specifies flags affecting command processing
* @product_specific - product specific information
@@ -352,7 +352,7 @@
* struct mpt2_diag_query - query relevant info associated with diag buffers
* @hdr - generic header
* @reserved -
- * @buffer_type - specifies either TRACE or SNAPSHOT
+ * @buffer_type - specifies either TRACE, SNAPSHOT, or EXTENDED
* @application_flags - misc flags
* @diagnostic_flags - specifies flags affecting command processing
* @product_specific - product specific information
diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
index 86ab32d..efabea1 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
@@ -76,6 +76,7 @@
static u8 ctl_cb_idx = -1;
static u8 base_cb_idx = -1;
static u8 transport_cb_idx = -1;
+static u8 scsih_cb_idx = -1;
static u8 config_cb_idx = -1;
static int mpt_ids;
@@ -196,10 +197,28 @@
PCI_ANY_ID, PCI_ANY_ID },
{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2108_3,
PCI_ANY_ID, PCI_ANY_ID },
+ /* Meteor ~ 2116 */
{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2116_1,
PCI_ANY_ID, PCI_ANY_ID },
{ MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2116_2,
PCI_ANY_ID, PCI_ANY_ID },
+ /* Thunderbolt ~ 2208 */
+ { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_1,
+ PCI_ANY_ID, PCI_ANY_ID },
+ { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_2,
+ PCI_ANY_ID, PCI_ANY_ID },
+ { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_3,
+ PCI_ANY_ID, PCI_ANY_ID },
+ { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_4,
+ PCI_ANY_ID, PCI_ANY_ID },
+ { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_5,
+ PCI_ANY_ID, PCI_ANY_ID },
+ { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_6,
+ PCI_ANY_ID, PCI_ANY_ID },
+ { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_7,
+ PCI_ANY_ID, PCI_ANY_ID },
+ { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_8,
+ PCI_ANY_ID, PCI_ANY_ID },
{0} /* Terminating entry */
};
MODULE_DEVICE_TABLE(pci, scsih_pci_table);
@@ -317,6 +336,47 @@
}
/**
+ * _scsih_get_sas_address - set the sas_address for given device handle
+ * @handle: device handle
+ * @sas_address: sas address
+ *
+ * Returns 0 success, non-zero when failure
+ */
+static int
+_scsih_get_sas_address(struct MPT2SAS_ADAPTER *ioc, u16 handle,
+ u64 *sas_address)
+{
+ Mpi2SasDevicePage0_t sas_device_pg0;
+ Mpi2ConfigReply_t mpi_reply;
+ u32 ioc_status;
+
+ if (handle <= ioc->sas_hba.num_phys) {
+ *sas_address = ioc->sas_hba.sas_address;
+ return 0;
+ } else
+ *sas_address = 0;
+
+ if ((mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0,
+ MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle))) {
+ printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ return -ENXIO;
+ }
+
+ ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+ MPI2_IOCSTATUS_MASK;
+ if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+ printk(MPT2SAS_ERR_FMT "handle(0x%04x), ioc_status(0x%04x)"
+ "\nfailure at %s:%d/%s()!\n", ioc->name, handle, ioc_status,
+ __FILE__, __LINE__, __func__);
+ return -EIO;
+ }
+
+ *sas_address = le64_to_cpu(sas_device_pg0.SASAddress);
+ return 0;
+}
+
+/**
* _scsih_determine_boot_device - determine boot device.
* @ioc: per adapter object
* @device: either sas_device or raid_device object
@@ -510,8 +570,6 @@
struct _sas_device *sas_device)
{
unsigned long flags;
- u16 handle, parent_handle;
- u64 sas_address;
dewtprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: handle"
"(0x%04x), sas_addr(0x%016llx)\n", ioc->name, __func__,
@@ -521,10 +579,8 @@
list_add_tail(&sas_device->list, &ioc->sas_device_list);
spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
- handle = sas_device->handle;
- parent_handle = sas_device->parent_handle;
- sas_address = sas_device->sas_address;
- if (!mpt2sas_transport_port_add(ioc, handle, parent_handle))
+ if (!mpt2sas_transport_port_add(ioc, sas_device->handle,
+ sas_device->sas_address_parent))
_scsih_sas_device_remove(ioc, sas_device);
}
@@ -553,31 +609,6 @@
}
/**
- * mpt2sas_scsih_expander_find_by_handle - expander device search
- * @ioc: per adapter object
- * @handle: expander handle (assigned by firmware)
- * Context: Calling function should acquire ioc->sas_device_lock
- *
- * This searches for expander device based on handle, then returns the
- * sas_node object.
- */
-struct _sas_node *
-mpt2sas_scsih_expander_find_by_handle(struct MPT2SAS_ADAPTER *ioc, u16 handle)
-{
- struct _sas_node *sas_expander, *r;
-
- r = NULL;
- list_for_each_entry(sas_expander, &ioc->sas_expander_list, list) {
- if (sas_expander->handle != handle)
- continue;
- r = sas_expander;
- goto out;
- }
- out:
- return r;
-}
-
-/**
* _scsih_raid_device_find_by_id - raid device search
* @ioc: per adapter object
* @id: sas device target id
@@ -699,6 +730,31 @@
}
/**
+ * mpt2sas_scsih_expander_find_by_handle - expander device search
+ * @ioc: per adapter object
+ * @handle: expander handle (assigned by firmware)
+ * Context: Calling function should acquire ioc->sas_device_lock
+ *
+ * This searches for expander device based on handle, then returns the
+ * sas_node object.
+ */
+struct _sas_node *
+mpt2sas_scsih_expander_find_by_handle(struct MPT2SAS_ADAPTER *ioc, u16 handle)
+{
+ struct _sas_node *sas_expander, *r;
+
+ r = NULL;
+ list_for_each_entry(sas_expander, &ioc->sas_expander_list, list) {
+ if (sas_expander->handle != handle)
+ continue;
+ r = sas_expander;
+ goto out;
+ }
+ out:
+ return r;
+}
+
+/**
* mpt2sas_scsih_expander_find_by_sas_address - expander device search
* @ioc: per adapter object
* @sas_address: sas address
@@ -1043,17 +1099,46 @@
* _scsih_change_queue_depth - setting device queue depth
* @sdev: scsi device struct
* @qdepth: requested queue depth
+ * @reason: calling context
*
* Returns queue depth.
*/
static int
-_scsih_change_queue_depth(struct scsi_device *sdev, int qdepth)
+_scsih_change_queue_depth(struct scsi_device *sdev, int qdepth, int reason)
{
struct Scsi_Host *shost = sdev->host;
int max_depth;
int tag_type;
+ struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
+ struct MPT2SAS_DEVICE *sas_device_priv_data;
+ struct MPT2SAS_TARGET *sas_target_priv_data;
+ struct _sas_device *sas_device;
+ unsigned long flags;
+
+ if (reason != SCSI_QDEPTH_DEFAULT)
+ return -EOPNOTSUPP;
max_depth = shost->can_queue;
+
+ /* limit max device queue for SATA to 32 */
+ sas_device_priv_data = sdev->hostdata;
+ if (!sas_device_priv_data)
+ goto not_sata;
+ sas_target_priv_data = sas_device_priv_data->sas_target;
+ if (!sas_target_priv_data)
+ goto not_sata;
+ if ((sas_target_priv_data->flags & MPT_TARGET_FLAGS_VOLUME))
+ goto not_sata;
+ spin_lock_irqsave(&ioc->sas_device_lock, flags);
+ sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc,
+ sas_device_priv_data->sas_target->sas_address);
+ spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+ if (sas_device && sas_device->device_info &
+ MPI2_SAS_DEVICE_INFO_SATA_DEVICE)
+ max_depth = MPT2SAS_SATA_QUEUE_DEPTH;
+
+ not_sata:
+
if (!sdev->tagged_supported)
max_depth = 1;
if (qdepth > max_depth)
@@ -1488,7 +1573,7 @@
r_level, raid_device->handle,
(unsigned long long)raid_device->wwid,
raid_device->num_pds, ds);
- _scsih_change_queue_depth(sdev, qdepth);
+ _scsih_change_queue_depth(sdev, qdepth, SCSI_QDEPTH_DEFAULT);
return 0;
}
@@ -1534,7 +1619,7 @@
_scsih_display_sata_capabilities(ioc, sas_device, sdev);
}
- _scsih_change_queue_depth(sdev, qdepth);
+ _scsih_change_queue_depth(sdev, qdepth, SCSI_QDEPTH_DEFAULT);
if (ssp_target)
sas_read_port_mode_page(sdev);
@@ -1874,6 +1959,8 @@
goto out;
}
+ mpt2sas_halt_firmware(ioc);
+
mutex_lock(&ioc->tm_cmds.mutex);
handle = sas_device_priv_data->sas_target->handle;
mpt2sas_scsih_issue_tm(ioc, handle, sas_device_priv_data->lun,
@@ -2297,7 +2384,6 @@
u16 handle;
u16 reason_code;
u8 phy_number;
- u8 link_rate;
for (i = 0; i < event_data->NumEntries; i++) {
handle = le16_to_cpu(event_data->PHY[i].AttachedDevHandle);
@@ -2308,11 +2394,6 @@
MPI2_EVENT_SAS_TOPO_RC_MASK;
if (reason_code == MPI2_EVENT_SAS_TOPO_RC_DELAY_NOT_RESPONDING)
_scsih_block_io_device(ioc, handle);
- if (reason_code == MPI2_EVENT_SAS_TOPO_RC_PHY_CHANGED) {
- link_rate = event_data->PHY[i].LinkRate >> 4;
- if (link_rate >= MPI2_SAS_NEG_LINK_RATE_1_5)
- _scsih_ublock_io_device(ioc, handle);
- }
}
}
@@ -2349,16 +2430,10 @@
spin_lock_irqsave(&ioc->sas_device_lock, flags);
sas_device = _scsih_sas_device_find_by_handle(ioc, handle);
- if (!sas_device) {
- spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
- printk(MPT2SAS_ERR_FMT "%s: failed finding sas_device\n",
- ioc->name, __func__);
- return;
- }
spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
/* skip is hidden raid component */
- if (sas_device->hidden_raid_component)
+ if (sas_device && sas_device->hidden_raid_component)
return;
smid = mpt2sas_base_get_smid_hpr(ioc, ioc->tm_tr_cb_idx);
@@ -2371,18 +2446,31 @@
delayed_tr->state = MPT2SAS_REQ_SAS_CNTRL;
list_add_tail(&delayed_tr->list,
&ioc->delayed_tr_list);
- if (sas_device->starget)
+ if (sas_device && sas_device->starget) {
dewtprintk(ioc, starget_printk(KERN_INFO,
sas_device->starget, "DELAYED:tr:handle(0x%04x), "
- "(open)\n", sas_device->handle));
+ "(open)\n", handle));
+ } else {
+ dewtprintk(ioc, printk(MPT2SAS_INFO_FMT
+ "DELAYED:tr:handle(0x%04x), (open)\n",
+ ioc->name, handle));
+ }
return;
}
- if (sas_device->starget && sas_device->starget->hostdata) {
- sas_target_priv_data = sas_device->starget->hostdata;
- sas_target_priv_data->tm_busy = 1;
- dewtprintk(ioc, starget_printk(KERN_INFO, sas_device->starget,
- "tr:handle(0x%04x), (open)\n", sas_device->handle));
+ if (sas_device) {
+ sas_device->state |= MPTSAS_STATE_TR_SEND;
+ sas_device->state |= MPT2SAS_REQ_SAS_CNTRL;
+ if (sas_device->starget && sas_device->starget->hostdata) {
+ sas_target_priv_data = sas_device->starget->hostdata;
+ sas_target_priv_data->tm_busy = 1;
+ dewtprintk(ioc, starget_printk(KERN_INFO,
+ sas_device->starget, "tr:handle(0x%04x), (open)\n",
+ handle));
+ }
+ } else {
+ dewtprintk(ioc, printk(MPT2SAS_INFO_FMT
+ "tr:handle(0x%04x), (open)\n", ioc->name, handle));
}
mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
@@ -2390,8 +2478,6 @@
mpi_request->Function = MPI2_FUNCTION_SCSI_TASK_MGMT;
mpi_request->DevHandle = cpu_to_le16(handle);
mpi_request->TaskType = MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET;
- sas_device->state |= MPTSAS_STATE_TR_SEND;
- sas_device->state |= MPT2SAS_REQ_SAS_CNTRL;
mpt2sas_base_put_smid_hi_priority(ioc, smid);
}
@@ -2426,21 +2512,25 @@
spin_lock_irqsave(&ioc->sas_device_lock, flags);
sas_device = _scsih_sas_device_find_by_handle(ioc, handle);
- if (!sas_device) {
- spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
- printk(MPT2SAS_ERR_FMT "%s: failed finding sas_device\n",
- ioc->name, __func__);
- return 1;
- }
- sas_device->state |= MPTSAS_STATE_CNTRL_COMPLETE;
spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
- if (sas_device->starget)
- dewtprintk(ioc, starget_printk(KERN_INFO, sas_device->starget,
+ if (sas_device) {
+ sas_device->state |= MPTSAS_STATE_CNTRL_COMPLETE;
+ if (sas_device->starget)
+ dewtprintk(ioc, starget_printk(KERN_INFO,
+ sas_device->starget,
+ "sc_complete:handle(0x%04x), "
+ "ioc_status(0x%04x), loginfo(0x%08x)\n",
+ handle, le16_to_cpu(mpi_reply->IOCStatus),
+ le32_to_cpu(mpi_reply->IOCLogInfo)));
+ } else {
+ dewtprintk(ioc, printk(MPT2SAS_INFO_FMT
"sc_complete:handle(0x%04x), "
"ioc_status(0x%04x), loginfo(0x%08x)\n",
- handle, le16_to_cpu(mpi_reply->IOCStatus),
+ ioc->name, handle, le16_to_cpu(mpi_reply->IOCStatus),
le32_to_cpu(mpi_reply->IOCLogInfo)));
+ }
+
return 1;
}
@@ -2478,28 +2568,33 @@
handle = le16_to_cpu(mpi_reply->DevHandle);
spin_lock_irqsave(&ioc->sas_device_lock, flags);
sas_device = _scsih_sas_device_find_by_handle(ioc, handle);
- if (!sas_device) {
- spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
- printk(MPT2SAS_ERR_FMT "%s: failed finding sas_device\n",
- ioc->name, __func__);
- return 1;
- }
- sas_device->state |= MPTSAS_STATE_TR_COMPLETE;
spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
- if (sas_device->starget)
- dewtprintk(ioc, starget_printk(KERN_INFO, sas_device->starget,
- "tr_complete:handle(0x%04x), (%s) ioc_status(0x%04x), "
- "loginfo(0x%08x), completed(%d)\n",
- sas_device->handle, (sas_device->state &
- MPT2SAS_REQ_SAS_CNTRL) ? "open" : "active",
- le16_to_cpu(mpi_reply->IOCStatus),
+ if (sas_device) {
+ sas_device->state |= MPTSAS_STATE_TR_COMPLETE;
+ if (sas_device->starget) {
+ dewtprintk(ioc, starget_printk(KERN_INFO,
+ sas_device->starget, "tr_complete:handle(0x%04x), "
+ "(%s) ioc_status(0x%04x), loginfo(0x%08x), "
+ "completed(%d)\n", sas_device->handle,
+ (sas_device->state & MPT2SAS_REQ_SAS_CNTRL) ?
+ "open" : "active",
+ le16_to_cpu(mpi_reply->IOCStatus),
+ le32_to_cpu(mpi_reply->IOCLogInfo),
+ le32_to_cpu(mpi_reply->TerminationCount)));
+ if (sas_device->starget->hostdata) {
+ sas_target_priv_data =
+ sas_device->starget->hostdata;
+ sas_target_priv_data->tm_busy = 0;
+ }
+ }
+ } else {
+ dewtprintk(ioc, printk(MPT2SAS_INFO_FMT
+ "tr_complete:handle(0x%04x), (open) ioc_status(0x%04x), "
+ "loginfo(0x%08x), completed(%d)\n", ioc->name,
+ handle, le16_to_cpu(mpi_reply->IOCStatus),
le32_to_cpu(mpi_reply->IOCLogInfo),
le32_to_cpu(mpi_reply->TerminationCount)));
-
- if (sas_device->starget && sas_device->starget->hostdata) {
- sas_target_priv_data = sas_device->starget->hostdata;
- sas_target_priv_data->tm_busy = 0;
}
if (!list_empty(&ioc->delayed_tr_list)) {
@@ -2514,8 +2609,7 @@
} else
rc = 1;
-
- if (!(sas_device->state & MPT2SAS_REQ_SAS_CNTRL))
+ if (sas_device && !(sas_device->state & MPT2SAS_REQ_SAS_CNTRL))
return rc;
if (ioc->shost_recovery) {
@@ -2531,12 +2625,14 @@
return rc;
}
+ if (sas_device)
+ sas_device->state |= MPTSAS_STATE_CNTRL_SEND;
+
mpi_request = mpt2sas_base_get_msg_frame(ioc, smid_sas_ctrl);
memset(mpi_request, 0, sizeof(Mpi2SasIoUnitControlRequest_t));
mpi_request->Function = MPI2_FUNCTION_SAS_IO_UNIT_CONTROL;
mpi_request->Operation = MPI2_SAS_OP_REMOVE_DEVICE;
mpi_request->DevHandle = mpi_reply->DevHandle;
- sas_device->state |= MPTSAS_STATE_CNTRL_SEND;
mpt2sas_base_put_smid_default(ioc, smid_sas_ctrl);
return rc;
}
@@ -2678,8 +2774,6 @@
else
return;
- mpi_request->EEDPBlockSize = scmd->device->sector_size;
-
switch (prot_type) {
case SCSI_PROT_DIF_TYPE1:
@@ -2687,8 +2781,7 @@
* enable ref/guard checking
* auto increment ref tag
*/
- mpi_request->EEDPFlags = eedp_flags |
- MPI2_SCSIIO_EEDPFLAGS_INC_PRI_REFTAG |
+ eedp_flags |= MPI2_SCSIIO_EEDPFLAGS_INC_PRI_REFTAG |
MPI2_SCSIIO_EEDPFLAGS_CHECK_REFTAG |
MPI2_SCSIIO_EEDPFLAGS_CHECK_GUARD;
mpi_request->CDB.EEDP32.PrimaryReferenceTag =
@@ -2701,11 +2794,11 @@
/*
* enable guard checking
*/
- mpi_request->EEDPFlags = eedp_flags |
- MPI2_SCSIIO_EEDPFLAGS_CHECK_GUARD;
-
+ eedp_flags |= MPI2_SCSIIO_EEDPFLAGS_CHECK_GUARD;
break;
}
+ mpi_request->EEDPBlockSize = cpu_to_le32(scmd->device->sector_size);
+ mpi_request->EEDPFlags = cpu_to_le16(eedp_flags);
}
/**
@@ -2788,7 +2881,7 @@
}
/* see if we are busy with task managment stuff */
- if (sas_target_priv_data->tm_busy)
+ if (sas_device_priv_data->block || sas_target_priv_data->tm_busy)
return SCSI_MLQUEUE_DEVICE_BUSY;
else if (ioc->shost_recovery || ioc->ioc_link_reset_in_progress)
return SCSI_MLQUEUE_HOST_BUSY;
@@ -2842,7 +2935,7 @@
mpi_request->MsgFlags = MPI2_SCSIIO_MSGFLAGS_SYSTEM_SENSE_ADDR;
mpi_request->SenseBufferLength = SCSI_SENSE_BUFFERSIZE;
mpi_request->SenseBufferLowAddress =
- (u32)mpt2sas_base_get_sense_buffer_dma(ioc, smid);
+ mpt2sas_base_get_sense_buffer_dma(ioc, smid);
mpi_request->SGLOffset0 = offsetof(Mpi2SCSIIORequest_t, SGL) / 4;
mpi_request->SGLFlags = cpu_to_le16(MPI2_SCSIIO_SGLFLAGS_TYPE_MPI +
MPI2_SCSIIO_SGLFLAGS_SYSTEM_ADDR);
@@ -2894,7 +2987,7 @@
#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
/**
- * _scsih_scsi_ioc_info - translated non-succesfull SCSI_IO request
+ * _scsih_scsi_ioc_info - translated non-successfull SCSI_IO request
* @ioc: per adapter object
* @scmd: pointer to scsi command object
* @mpi_reply: reply mf payload returned from firmware
@@ -3059,7 +3152,7 @@
if (scsi_state & MPI2_SCSI_STATE_RESPONSE_INFO_VALID) {
response_info = le32_to_cpu(mpi_reply->ResponseInfo);
response_bytes = (u8 *)&response_info;
- _scsih_response_code(ioc, response_bytes[3]);
+ _scsih_response_code(ioc, response_bytes[0]);
}
}
#endif
@@ -3177,7 +3270,7 @@
u8 scsi_status;
u32 log_info;
struct MPT2SAS_DEVICE *sas_device_priv_data;
- u32 response_code;
+ u32 response_code = 0;
mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply);
scmd = _scsih_scsi_lookup_get(ioc, smid);
@@ -3199,16 +3292,16 @@
}
/* turning off TLR */
+ scsi_state = mpi_reply->SCSIState;
+ if (scsi_state & MPI2_SCSI_STATE_RESPONSE_INFO_VALID)
+ response_code =
+ le32_to_cpu(mpi_reply->ResponseInfo) & 0xFF;
if (!sas_device_priv_data->tlr_snoop_check) {
sas_device_priv_data->tlr_snoop_check++;
- if (sas_device_priv_data->flags & MPT_DEVICE_TLR_ON) {
- response_code = (le32_to_cpu(mpi_reply->ResponseInfo)
- >> 24);
- if (response_code ==
- MPI2_SCSITASKMGMT_RSP_INVALID_FRAME)
- sas_device_priv_data->flags &=
- ~MPT_DEVICE_TLR_ON;
- }
+ if ((sas_device_priv_data->flags & MPT_DEVICE_TLR_ON) &&
+ response_code == MPI2_SCSITASKMGMT_RSP_INVALID_FRAME)
+ sas_device_priv_data->flags &=
+ ~MPT_DEVICE_TLR_ON;
}
xfer_cnt = le32_to_cpu(mpi_reply->TransferCount);
@@ -3219,7 +3312,6 @@
else
log_info = 0;
ioc_status &= MPI2_IOCSTATUS_MASK;
- scsi_state = mpi_reply->SCSIState;
scsi_status = mpi_reply->SCSIStatus;
if (ioc_status == MPI2_IOCSTATUS_SCSI_DATA_UNDERRUN && xfer_cnt == 0 &&
@@ -3255,10 +3347,9 @@
case MPI2_IOCSTATUS_SCSI_IOC_TERMINATED:
if (sas_device_priv_data->block) {
- scmd->result = (DID_BUS_BUSY << 16);
- break;
+ scmd->result = DID_TRANSPORT_DISRUPTED << 16;
+ goto out;
}
-
case MPI2_IOCSTATUS_SCSI_TASK_TERMINATED:
case MPI2_IOCSTATUS_SCSI_EXT_TERMINATED:
scmd->result = DID_RESET << 16;
@@ -3304,8 +3395,10 @@
case MPI2_IOCSTATUS_SCSI_RECOVERED_ERROR:
case MPI2_IOCSTATUS_SUCCESS:
scmd->result = (DID_OK << 16) | scsi_status;
- if (scsi_state & (MPI2_SCSI_STATE_AUTOSENSE_FAILED |
- MPI2_SCSI_STATE_NO_SCSI_STATUS))
+ if (response_code ==
+ MPI2_SCSITASKMGMT_RSP_INVALID_FRAME ||
+ (scsi_state & (MPI2_SCSI_STATE_AUTOSENSE_FAILED |
+ MPI2_SCSI_STATE_NO_SCSI_STATUS)))
scmd->result = DID_SOFT_ERROR << 16;
else if (scsi_state & MPI2_SCSI_STATE_TERMINATED)
scmd->result = DID_RESET << 16;
@@ -3344,7 +3437,6 @@
/**
* _scsih_sas_host_refresh - refreshing sas host object contents
* @ioc: per adapter object
- * @update: update link information
* Context: user
*
* During port enable, fw will send topology events for every device. Its
@@ -3354,13 +3446,14 @@
* Return nothing.
*/
static void
-_scsih_sas_host_refresh(struct MPT2SAS_ADAPTER *ioc, u8 update)
+_scsih_sas_host_refresh(struct MPT2SAS_ADAPTER *ioc)
{
u16 sz;
u16 ioc_status;
int i;
Mpi2ConfigReply_t mpi_reply;
Mpi2SasIOUnitPage0_t *sas_iounit_pg0 = NULL;
+ u16 attached_handle;
dtmprintk(ioc, printk(MPT2SAS_INFO_FMT
"updating handles for sas_host(0x%016llx)\n",
@@ -3374,27 +3467,24 @@
ioc->name, __FILE__, __LINE__, __func__);
return;
}
- if (!(mpt2sas_config_get_sas_iounit_pg0(ioc, &mpi_reply,
- sas_iounit_pg0, sz))) {
- ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
- MPI2_IOCSTATUS_MASK;
- if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
- goto out;
- for (i = 0; i < ioc->sas_hba.num_phys ; i++) {
- ioc->sas_hba.phy[i].handle =
- le16_to_cpu(sas_iounit_pg0->PhyData[i].
- ControllerDevHandle);
- if (update)
- mpt2sas_transport_update_links(
- ioc,
- ioc->sas_hba.phy[i].handle,
- le16_to_cpu(sas_iounit_pg0->PhyData[i].
- AttachedDevHandle), i,
- sas_iounit_pg0->PhyData[i].
- NegotiatedLinkRate >> 4);
- }
- }
+ if ((mpt2sas_config_get_sas_iounit_pg0(ioc, &mpi_reply,
+ sas_iounit_pg0, sz)) != 0)
+ goto out;
+ ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK;
+ if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
+ goto out;
+ for (i = 0; i < ioc->sas_hba.num_phys ; i++) {
+ if (i == 0)
+ ioc->sas_hba.handle = le16_to_cpu(sas_iounit_pg0->
+ PhyData[0].ControllerDevHandle);
+ ioc->sas_hba.phy[i].handle = ioc->sas_hba.handle;
+ attached_handle = le16_to_cpu(sas_iounit_pg0->PhyData[i].
+ AttachedDevHandle);
+ mpt2sas_transport_update_links(ioc, ioc->sas_hba.sas_address,
+ attached_handle, i, sas_iounit_pg0->PhyData[i].
+ NegotiatedLinkRate >> 4);
+ }
out:
kfree(sas_iounit_pg0);
}
@@ -3507,19 +3597,21 @@
ioc->name, __FILE__, __LINE__, __func__);
goto out;
}
- ioc->sas_hba.phy[i].handle =
- le16_to_cpu(sas_iounit_pg0->PhyData[i].ControllerDevHandle);
+
+ if (i == 0)
+ ioc->sas_hba.handle = le16_to_cpu(sas_iounit_pg0->
+ PhyData[0].ControllerDevHandle);
+ ioc->sas_hba.phy[i].handle = ioc->sas_hba.handle;
ioc->sas_hba.phy[i].phy_id = i;
mpt2sas_transport_add_host_phy(ioc, &ioc->sas_hba.phy[i],
phy_pg0, ioc->sas_hba.parent_dev);
}
if ((mpt2sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0,
- MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, ioc->sas_hba.phy[0].handle))) {
+ MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, ioc->sas_hba.handle))) {
printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
ioc->name, __FILE__, __LINE__, __func__);
goto out;
}
- ioc->sas_hba.handle = le16_to_cpu(sas_device_pg0.DevHandle);
ioc->sas_hba.enclosure_handle =
le16_to_cpu(sas_device_pg0.EnclosureHandle);
ioc->sas_hba.sas_address = le64_to_cpu(sas_device_pg0.SASAddress);
@@ -3562,7 +3654,7 @@
Mpi2SasEnclosurePage0_t enclosure_pg0;
u32 ioc_status;
u16 parent_handle;
- __le64 sas_address;
+ __le64 sas_address, sas_address_parent = 0;
int i;
unsigned long flags;
struct _sas_port *mpt2sas_port = NULL;
@@ -3591,10 +3683,16 @@
/* handle out of order topology events */
parent_handle = le16_to_cpu(expander_pg0.ParentDevHandle);
- if (parent_handle >= ioc->sas_hba.num_phys) {
+ if (_scsih_get_sas_address(ioc, parent_handle, &sas_address_parent)
+ != 0) {
+ printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
+ return -1;
+ }
+ if (sas_address_parent != ioc->sas_hba.sas_address) {
spin_lock_irqsave(&ioc->sas_node_lock, flags);
- sas_expander = mpt2sas_scsih_expander_find_by_handle(ioc,
- parent_handle);
+ sas_expander = mpt2sas_scsih_expander_find_by_sas_address(ioc,
+ sas_address_parent);
spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
if (!sas_expander) {
rc = _scsih_expander_add(ioc, parent_handle);
@@ -3622,14 +3720,12 @@
sas_expander->handle = handle;
sas_expander->num_phys = expander_pg0.NumPhys;
- sas_expander->parent_handle = parent_handle;
- sas_expander->enclosure_handle =
- le16_to_cpu(expander_pg0.EnclosureHandle);
+ sas_expander->sas_address_parent = sas_address_parent;
sas_expander->sas_address = sas_address;
printk(MPT2SAS_INFO_FMT "expander_add: handle(0x%04x),"
" parent(0x%04x), sas_addr(0x%016llx), phys(%d)\n", ioc->name,
- handle, sas_expander->parent_handle, (unsigned long long)
+ handle, parent_handle, (unsigned long long)
sas_expander->sas_address, sas_expander->num_phys);
if (!sas_expander->num_phys)
@@ -3645,7 +3741,7 @@
INIT_LIST_HEAD(&sas_expander->sas_port_list);
mpt2sas_port = mpt2sas_transport_port_add(ioc, handle,
- sas_expander->parent_handle);
+ sas_address_parent);
if (!mpt2sas_port) {
printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
ioc->name, __FILE__, __LINE__, __func__);
@@ -3691,20 +3787,54 @@
if (mpt2sas_port)
mpt2sas_transport_port_remove(ioc, sas_expander->sas_address,
- sas_expander->parent_handle);
+ sas_address_parent);
kfree(sas_expander);
return rc;
}
/**
+ * _scsih_done - scsih callback handler.
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * @msix_index: MSIX table index supplied by the OS
+ * @reply: reply message frame(lower 32bit addr)
+ *
+ * Callback handler when sending internal generated message frames.
+ * The callback index passed is `ioc->scsih_cb_idx`
+ *
+ * Return 1 meaning mf should be freed from _base_interrupt
+ * 0 means the mf is freed from this function.
+ */
+static u8
+_scsih_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply)
+{
+ MPI2DefaultReply_t *mpi_reply;
+
+ mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply);
+ if (ioc->scsih_cmds.status == MPT2_CMD_NOT_USED)
+ return 1;
+ if (ioc->scsih_cmds.smid != smid)
+ return 1;
+ ioc->scsih_cmds.status |= MPT2_CMD_COMPLETE;
+ if (mpi_reply) {
+ memcpy(ioc->scsih_cmds.reply, mpi_reply,
+ mpi_reply->MsgLength*4);
+ ioc->scsih_cmds.status |= MPT2_CMD_REPLY_VALID;
+ }
+ ioc->scsih_cmds.status &= ~MPT2_CMD_PENDING;
+ complete(&ioc->scsih_cmds.done);
+ return 1;
+}
+
+/**
* _scsih_expander_remove - removing expander object
* @ioc: per adapter object
- * @handle: expander handle
+ * @sas_address: expander sas_address
*
* Return nothing.
*/
static void
-_scsih_expander_remove(struct MPT2SAS_ADAPTER *ioc, u16 handle)
+_scsih_expander_remove(struct MPT2SAS_ADAPTER *ioc, u64 sas_address)
{
struct _sas_node *sas_expander;
unsigned long flags;
@@ -3713,7 +3843,8 @@
return;
spin_lock_irqsave(&ioc->sas_node_lock, flags);
- sas_expander = mpt2sas_scsih_expander_find_by_handle(ioc, handle);
+ sas_expander = mpt2sas_scsih_expander_find_by_sas_address(ioc,
+ sas_address);
spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
_scsih_expander_node_remove(ioc, sas_expander);
}
@@ -3805,8 +3936,11 @@
}
sas_device->handle = handle;
- sas_device->parent_handle =
- le16_to_cpu(sas_device_pg0.ParentDevHandle);
+ if (_scsih_get_sas_address(ioc, le16_to_cpu
+ (sas_device_pg0.ParentDevHandle),
+ &sas_device->sas_address_parent) != 0)
+ printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+ ioc->name, __FILE__, __LINE__, __func__);
sas_device->enclosure_handle =
le16_to_cpu(sas_device_pg0.EnclosureHandle);
sas_device->slot =
@@ -3836,43 +3970,39 @@
/**
* _scsih_remove_device - removing sas device object
* @ioc: per adapter object
- * @handle: sas device handle
+ * @sas_device: the sas_device object
*
* Return nothing.
*/
static void
-_scsih_remove_device(struct MPT2SAS_ADAPTER *ioc, u16 handle)
+_scsih_remove_device(struct MPT2SAS_ADAPTER *ioc, struct _sas_device
+ *sas_device)
{
struct MPT2SAS_TARGET *sas_target_priv_data;
- struct _sas_device *sas_device;
- unsigned long flags;
Mpi2SasIoUnitControlReply_t mpi_reply;
Mpi2SasIoUnitControlRequest_t mpi_request;
- u16 device_handle;
+ u16 device_handle, handle;
- /* lookup sas_device */
- spin_lock_irqsave(&ioc->sas_device_lock, flags);
- sas_device = _scsih_sas_device_find_by_handle(ioc, handle);
- if (!sas_device) {
- spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+ if (!sas_device)
return;
- }
- dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: enter: handle"
- "(0x%04x)\n", ioc->name, __func__, handle));
+ handle = sas_device->handle;
+ dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: enter: handle(0x%04x),"
+ " sas_addr(0x%016llx)\n", ioc->name, __func__, handle,
+ (unsigned long long) sas_device->sas_address));
if (sas_device->starget && sas_device->starget->hostdata) {
sas_target_priv_data = sas_device->starget->hostdata;
sas_target_priv_data->deleted = 1;
}
- spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
- if (ioc->remove_host)
+ if (ioc->remove_host || ioc->shost_recovery || !handle)
goto out;
if ((sas_device->state & MPTSAS_STATE_TR_COMPLETE)) {
dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "\tskip "
- "target_reset handle(0x%04x)\n", ioc->name, handle));
+ "target_reset handle(0x%04x)\n", ioc->name,
+ handle));
goto skip_tr;
}
@@ -3925,10 +4055,10 @@
_scsih_ublock_io_device(ioc, handle);
mpt2sas_transport_port_remove(ioc, sas_device->sas_address,
- sas_device->parent_handle);
+ sas_device->sas_address_parent);
printk(MPT2SAS_INFO_FMT "removing handle(0x%04x), sas_addr"
- "(0x%016llx)\n", ioc->name, sas_device->handle,
+ "(0x%016llx)\n", ioc->name, handle,
(unsigned long long) sas_device->sas_address);
_scsih_sas_device_remove(ioc, sas_device);
@@ -3952,7 +4082,7 @@
u16 reason_code;
u8 phy_number;
char *status_str = NULL;
- char link_rate[25];
+ u8 link_rate, prev_link_rate;
switch (event_data->ExpStatus) {
case MPI2_EVENT_SAS_TOPO_ES_ADDED:
@@ -3962,6 +4092,7 @@
status_str = "remove";
break;
case MPI2_EVENT_SAS_TOPO_ES_RESPONDING:
+ case 0:
status_str = "responding";
break;
case MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING:
@@ -3987,30 +4118,30 @@
MPI2_EVENT_SAS_TOPO_RC_MASK;
switch (reason_code) {
case MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED:
- snprintf(link_rate, 25, ": add, link(0x%02x)",
- (event_data->PHY[i].LinkRate >> 4));
- status_str = link_rate;
+ status_str = "target add";
break;
case MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING:
- status_str = ": remove";
+ status_str = "target remove";
break;
case MPI2_EVENT_SAS_TOPO_RC_DELAY_NOT_RESPONDING:
- status_str = ": remove_delay";
+ status_str = "delay target remove";
break;
case MPI2_EVENT_SAS_TOPO_RC_PHY_CHANGED:
- snprintf(link_rate, 25, ": link(0x%02x)",
- (event_data->PHY[i].LinkRate >> 4));
- status_str = link_rate;
+ status_str = "link rate change";
break;
case MPI2_EVENT_SAS_TOPO_RC_NO_CHANGE:
- status_str = ": responding";
+ status_str = "target responding";
break;
default:
- status_str = ": unknown";
+ status_str = "unknown";
break;
}
- printk(KERN_DEBUG "\tphy(%02d), attached_handle(0x%04x)%s\n",
- phy_number, handle, status_str);
+ link_rate = event_data->PHY[i].LinkRate >> 4;
+ prev_link_rate = event_data->PHY[i].LinkRate & 0xF;
+ printk(KERN_DEBUG "\tphy(%02d), attached_handle(0x%04x): %s:"
+ " link rate: new(0x%02x), old(0x%02x)\n", phy_number,
+ handle, status_str, link_rate, prev_link_rate);
+
}
}
#endif
@@ -4031,8 +4162,10 @@
u16 reason_code;
u8 phy_number;
struct _sas_node *sas_expander;
+ struct _sas_device *sas_device;
+ u64 sas_address;
unsigned long flags;
- u8 link_rate_;
+ u8 link_rate, prev_link_rate;
Mpi2EventDataSasTopologyChangeList_t *event_data = fw_event->event_data;
#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
@@ -4040,10 +4173,13 @@
_scsih_sas_topology_change_event_debug(ioc, event_data);
#endif
+ if (ioc->shost_recovery)
+ return;
+
if (!ioc->sas_hba.num_phys)
_scsih_sas_host_add(ioc);
else
- _scsih_sas_host_refresh(ioc, 0);
+ _scsih_sas_host_refresh(ioc);
if (fw_event->ignore) {
dewtprintk(ioc, printk(MPT2SAS_DEBUG_FMT "ignoring expander "
@@ -4058,6 +4194,17 @@
if (_scsih_expander_add(ioc, parent_handle) != 0)
return;
+ spin_lock_irqsave(&ioc->sas_node_lock, flags);
+ sas_expander = mpt2sas_scsih_expander_find_by_handle(ioc,
+ parent_handle);
+ spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
+ if (sas_expander)
+ sas_address = sas_expander->sas_address;
+ else if (parent_handle < ioc->sas_hba.num_phys)
+ sas_address = ioc->sas_hba.sas_address;
+ else
+ return;
+
/* handle siblings events */
for (i = 0; i < event_data->NumEntries; i++) {
if (fw_event->ignore) {
@@ -4077,48 +4224,47 @@
handle = le16_to_cpu(event_data->PHY[i].AttachedDevHandle);
if (!handle)
continue;
- link_rate_ = event_data->PHY[i].LinkRate >> 4;
+ link_rate = event_data->PHY[i].LinkRate >> 4;
+ prev_link_rate = event_data->PHY[i].LinkRate & 0xF;
switch (reason_code) {
case MPI2_EVENT_SAS_TOPO_RC_PHY_CHANGED:
+
+ if (link_rate == prev_link_rate)
+ break;
+
+ mpt2sas_transport_update_links(ioc, sas_address,
+ handle, phy_number, link_rate);
+
+ if (link_rate >= MPI2_SAS_NEG_LINK_RATE_1_5)
+ _scsih_ublock_io_device(ioc, handle);
+ break;
case MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED:
- if (!parent_handle) {
- if (phy_number < ioc->sas_hba.num_phys)
- mpt2sas_transport_update_links(
- ioc,
- ioc->sas_hba.phy[phy_number].handle,
- handle, phy_number, link_rate_);
- } else {
- spin_lock_irqsave(&ioc->sas_node_lock, flags);
- sas_expander =
- mpt2sas_scsih_expander_find_by_handle(ioc,
- parent_handle);
- spin_unlock_irqrestore(&ioc->sas_node_lock,
- flags);
- if (sas_expander) {
- if (phy_number < sas_expander->num_phys)
- mpt2sas_transport_update_links(
- ioc,
- sas_expander->
- phy[phy_number].handle,
- handle, phy_number,
- link_rate_);
- }
- }
- if (reason_code == MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED) {
- if (link_rate_ < MPI2_SAS_NEG_LINK_RATE_1_5)
- break;
- _scsih_add_device(ioc, handle, phy_number, 0);
- }
+
+ mpt2sas_transport_update_links(ioc, sas_address,
+ handle, phy_number, link_rate);
+
+ _scsih_add_device(ioc, handle, phy_number, 0);
break;
case MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING:
- _scsih_remove_device(ioc, handle);
+
+ spin_lock_irqsave(&ioc->sas_device_lock, flags);
+ sas_device = _scsih_sas_device_find_by_handle(ioc,
+ handle);
+ if (!sas_device) {
+ spin_unlock_irqrestore(&ioc->sas_device_lock,
+ flags);
+ break;
+ }
+ spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+ _scsih_remove_device(ioc, sas_device);
break;
}
}
/* handle expander removal */
- if (event_data->ExpStatus == MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING)
- _scsih_expander_remove(ioc, parent_handle);
+ if (event_data->ExpStatus == MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING &&
+ sas_expander)
+ _scsih_expander_remove(ioc, sas_address);
}
@@ -4170,6 +4316,12 @@
case MPI2_EVENT_SAS_DEV_STAT_RC_ASYNC_NOTIFICATION:
reason_str = "internal async notification";
break;
+ case MPI2_EVENT_SAS_DEV_STAT_RC_EXPANDER_REDUCED_FUNCTIONALITY:
+ reason_str = "expander reduced functionality";
+ break;
+ case MPI2_EVENT_SAS_DEV_STAT_RC_CMP_EXPANDER_REDUCED_FUNCTIONALITY:
+ reason_str = "expander reduced functionality complete";
+ break;
default:
reason_str = "unknown reason";
break;
@@ -4197,11 +4349,43 @@
_scsih_sas_device_status_change_event(struct MPT2SAS_ADAPTER *ioc,
struct fw_event_work *fw_event)
{
+ struct MPT2SAS_TARGET *target_priv_data;
+ struct _sas_device *sas_device;
+ __le64 sas_address;
+ unsigned long flags;
+ Mpi2EventDataSasDeviceStatusChange_t *event_data =
+ fw_event->event_data;
+
#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
_scsih_sas_device_status_change_event_debug(ioc,
- fw_event->event_data);
+ event_data);
#endif
+
+ if (!(event_data->ReasonCode ==
+ MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET &&
+ event_data->ReasonCode ==
+ MPI2_EVENT_SAS_DEV_STAT_RC_CMP_INTERNAL_DEV_RESET))
+ return;
+
+ spin_lock_irqsave(&ioc->sas_device_lock, flags);
+ sas_address = le64_to_cpu(event_data->SASAddress);
+ sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc,
+ sas_address);
+ spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+
+ if (!sas_device || !sas_device->starget)
+ return;
+
+ target_priv_data = sas_device->starget->hostdata;
+ if (!target_priv_data)
+ return;
+
+ if (event_data->ReasonCode ==
+ MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET)
+ target_priv_data->tm_busy = 1;
+ else
+ target_priv_data->tm_busy = 0;
}
#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
@@ -4281,6 +4465,7 @@
#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
Mpi2EventDataSasBroadcastPrimitive_t *event_data = fw_event->event_data;
#endif
+ u16 ioc_status;
dewtprintk(ioc, printk(MPT2SAS_DEBUG_FMT "broadcast primative: "
"phy number(%d), width(%d)\n", ioc->name, event_data->PhyNum,
event_data->PortWidth));
@@ -4314,8 +4499,9 @@
mpt2sas_scsih_issue_tm(ioc, handle, lun,
MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK, smid, 30);
ioc->tm_cmds.status = MPT2_CMD_NOT_USED;
-
- if ((mpi_reply->IOCStatus == MPI2_IOCSTATUS_SUCCESS) &&
+ ioc_status = le16_to_cpu(mpi_reply->IOCStatus)
+ & MPI2_IOCSTATUS_MASK;
+ if ((ioc_status == MPI2_IOCSTATUS_SUCCESS) &&
(mpi_reply->ResponseCode ==
MPI2_SCSITASKMGMT_RSP_TM_SUCCEEDED ||
mpi_reply->ResponseCode ==
@@ -4570,7 +4756,7 @@
spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
if (!sas_device)
return;
- _scsih_remove_device(ioc, handle);
+ _scsih_remove_device(ioc, sas_device);
}
/**
@@ -4591,6 +4777,8 @@
Mpi2ConfigReply_t mpi_reply;
Mpi2SasDevicePage0_t sas_device_pg0;
u32 ioc_status;
+ u64 sas_address;
+ u16 parent_handle;
spin_lock_irqsave(&ioc->sas_device_lock, flags);
sas_device = _scsih_sas_device_find_by_handle(ioc, handle);
@@ -4615,9 +4803,10 @@
return;
}
- mpt2sas_transport_update_links(ioc,
- le16_to_cpu(sas_device_pg0.ParentDevHandle),
- handle, sas_device_pg0.PhyNum, MPI2_SAS_NEG_LINK_RATE_1_5);
+ parent_handle = le16_to_cpu(sas_device_pg0.ParentDevHandle);
+ if (!_scsih_get_sas_address(ioc, parent_handle, &sas_address))
+ mpt2sas_transport_update_links(ioc, sas_address, handle,
+ sas_device_pg0.PhyNum, MPI2_SAS_NEG_LINK_RATE_1_5);
_scsih_add_device(ioc, handle, 0, 1);
}
@@ -4857,7 +5046,7 @@
_scsih_sas_ir_physical_disk_event(struct MPT2SAS_ADAPTER *ioc,
struct fw_event_work *fw_event)
{
- u16 handle;
+ u16 handle, parent_handle;
u32 state;
struct _sas_device *sas_device;
unsigned long flags;
@@ -4865,6 +5054,7 @@
Mpi2SasDevicePage0_t sas_device_pg0;
u32 ioc_status;
Mpi2EventDataIrPhysicalDisk_t *event_data = fw_event->event_data;
+ u64 sas_address;
if (event_data->ReasonCode != MPI2_EVENT_IR_PHYSDISK_RC_STATE_CHANGED)
return;
@@ -4906,9 +5096,10 @@
return;
}
- mpt2sas_transport_update_links(ioc,
- le16_to_cpu(sas_device_pg0.ParentDevHandle),
- handle, sas_device_pg0.PhyNum, MPI2_SAS_NEG_LINK_RATE_1_5);
+ parent_handle = le16_to_cpu(sas_device_pg0.ParentDevHandle);
+ if (!_scsih_get_sas_address(ioc, parent_handle, &sas_address))
+ mpt2sas_transport_update_links(ioc, sas_address, handle,
+ sas_device_pg0.PhyNum, MPI2_SAS_NEG_LINK_RATE_1_5);
_scsih_add_device(ioc, handle, 0, 1);
@@ -4948,11 +5139,17 @@
case MPI2_EVENT_IR_RAIDOP_CONSISTENCY_CHECK:
reason_str = "consistency check";
break;
- default:
- reason_str = "unknown reason";
+ case MPI2_EVENT_IR_RAIDOP_BACKGROUND_INIT:
+ reason_str = "background init";
+ break;
+ case MPI2_EVENT_IR_RAIDOP_MAKE_DATA_CONSISTENT:
+ reason_str = "make data consistent";
break;
}
+ if (!reason_str)
+ return;
+
printk(MPT2SAS_INFO_FMT "raid operational status: (%s)"
"\thandle(0x%04x), percent complete(%d)\n",
ioc->name, reason_str,
@@ -5252,18 +5449,23 @@
{
struct _sas_node *sas_expander;
unsigned long flags;
+ int i;
spin_lock_irqsave(&ioc->sas_node_lock, flags);
list_for_each_entry(sas_expander, &ioc->sas_expander_list, list) {
- if (sas_expander->sas_address == sas_address) {
- sas_expander->responding = 1;
- if (sas_expander->handle != handle) {
- printk(KERN_INFO "old handle(0x%04x)\n",
- sas_expander->handle);
- sas_expander->handle = handle;
- }
+ if (sas_expander->sas_address != sas_address)
+ continue;
+ sas_expander->responding = 1;
+ if (sas_expander->handle == handle)
goto out;
- }
+ printk(KERN_INFO "\texpander(0x%016llx): handle changed"
+ " from(0x%04x) to (0x%04x)!!!\n",
+ (unsigned long long)sas_expander->sas_address,
+ sas_expander->handle, handle);
+ sas_expander->handle = handle;
+ for (i = 0 ; i < sas_expander->num_phys ; i++)
+ sas_expander->phy[i].handle = handle;
+ goto out;
}
out:
spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
@@ -5340,7 +5542,9 @@
(unsigned long long)
sas_device->enclosure_logical_id,
sas_device->slot);
- _scsih_remove_device(ioc, sas_device->handle);
+ /* invalidate the device handle */
+ sas_device->handle = 0;
+ _scsih_remove_device(ioc, sas_device);
}
list_for_each_entry_safe(raid_device, raid_device_next,
@@ -5366,7 +5570,7 @@
sas_expander->responding = 0;
continue;
}
- _scsih_expander_remove(ioc, sas_expander->handle);
+ _scsih_expander_remove(ioc, sas_expander->sas_address);
goto retry_expander_search;
}
}
@@ -5406,7 +5610,7 @@
case MPT2_IOC_DONE_RESET:
dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: "
"MPT2_IOC_DONE_RESET\n", ioc->name, __func__));
- _scsih_sas_host_refresh(ioc, 0);
+ _scsih_sas_host_refresh(ioc);
_scsih_search_responding_sas_devices(ioc);
_scsih_search_responding_raid_devices(ioc);
_scsih_search_responding_expanders(ioc);
@@ -5646,7 +5850,7 @@
spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
if (!sas_device)
continue;
- _scsih_remove_device(ioc, sas_device->handle);
+ _scsih_remove_device(ioc, sas_device);
if (ioc->shost_recovery)
return;
goto retry_device_search;
@@ -5669,7 +5873,8 @@
spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
if (!expander_sibling)
continue;
- _scsih_expander_remove(ioc, expander_sibling->handle);
+ _scsih_expander_remove(ioc,
+ expander_sibling->sas_address);
if (ioc->shost_recovery)
return;
goto retry_expander_search;
@@ -5677,7 +5882,7 @@
}
mpt2sas_transport_port_remove(ioc, sas_expander->sas_address,
- sas_expander->parent_handle);
+ sas_expander->sas_address_parent);
printk(MPT2SAS_INFO_FMT "expander_remove: handle"
"(0x%04x), sas_addr(0x%016llx)\n", ioc->name,
@@ -5690,9 +5895,99 @@
}
/**
+ * _scsih_ir_shutdown - IR shutdown notification
+ * @ioc: per adapter object
+ *
+ * Sending RAID Action to alert the Integrated RAID subsystem of the IOC that
+ * the host system is shutting down.
+ *
+ * Return nothing.
+ */
+static void
+_scsih_ir_shutdown(struct MPT2SAS_ADAPTER *ioc)
+{
+ Mpi2RaidActionRequest_t *mpi_request;
+ Mpi2RaidActionReply_t *mpi_reply;
+ u16 smid;
+
+ /* is IR firmware build loaded ? */
+ if (!ioc->ir_firmware)
+ return;
+
+ /* are there any volumes ? */
+ if (list_empty(&ioc->raid_device_list))
+ return;
+
+ mutex_lock(&ioc->scsih_cmds.mutex);
+
+ if (ioc->scsih_cmds.status != MPT2_CMD_NOT_USED) {
+ printk(MPT2SAS_ERR_FMT "%s: scsih_cmd in use\n",
+ ioc->name, __func__);
+ goto out;
+ }
+ ioc->scsih_cmds.status = MPT2_CMD_PENDING;
+
+ smid = mpt2sas_base_get_smid(ioc, ioc->scsih_cb_idx);
+ if (!smid) {
+ printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
+ ioc->name, __func__);
+ ioc->scsih_cmds.status = MPT2_CMD_NOT_USED;
+ goto out;
+ }
+
+ mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
+ ioc->scsih_cmds.smid = smid;
+ memset(mpi_request, 0, sizeof(Mpi2RaidActionRequest_t));
+
+ mpi_request->Function = MPI2_FUNCTION_RAID_ACTION;
+ mpi_request->Action = MPI2_RAID_ACTION_SYSTEM_SHUTDOWN_INITIATED;
+
+ printk(MPT2SAS_INFO_FMT "IR shutdown (sending)\n", ioc->name);
+ init_completion(&ioc->scsih_cmds.done);
+ mpt2sas_base_put_smid_default(ioc, smid);
+ wait_for_completion_timeout(&ioc->scsih_cmds.done, 10*HZ);
+
+ if (!(ioc->scsih_cmds.status & MPT2_CMD_COMPLETE)) {
+ printk(MPT2SAS_ERR_FMT "%s: timeout\n",
+ ioc->name, __func__);
+ goto out;
+ }
+
+ if (ioc->scsih_cmds.status & MPT2_CMD_REPLY_VALID) {
+ mpi_reply = ioc->scsih_cmds.reply;
+
+ printk(MPT2SAS_INFO_FMT "IR shutdown (complete): "
+ "ioc_status(0x%04x), loginfo(0x%08x)\n",
+ ioc->name, le16_to_cpu(mpi_reply->IOCStatus),
+ le32_to_cpu(mpi_reply->IOCLogInfo));
+ }
+
+ out:
+ ioc->scsih_cmds.status = MPT2_CMD_NOT_USED;
+ mutex_unlock(&ioc->scsih_cmds.mutex);
+}
+
+/**
+ * _scsih_shutdown - routine call during system shutdown
+ * @pdev: PCI device struct
+ *
+ * Return nothing.
+ */
+static void
+_scsih_shutdown(struct pci_dev *pdev)
+{
+ struct Scsi_Host *shost = pci_get_drvdata(pdev);
+ struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
+
+ _scsih_ir_shutdown(ioc);
+ mpt2sas_base_detach(ioc);
+}
+
+/**
* _scsih_remove - detach and remove add host
* @pdev: PCI device struct
*
+ * Routine called when unloading the driver.
* Return nothing.
*/
static void __devexit
@@ -5726,7 +6021,7 @@
mpt2sas_scsih_sas_device_find_by_sas_address(ioc,
mpt2sas_port->remote_identify.sas_address);
if (sas_device) {
- _scsih_remove_device(ioc, sas_device->handle);
+ _scsih_remove_device(ioc, sas_device);
goto retry_again;
}
} else {
@@ -5735,7 +6030,7 @@
mpt2sas_port->remote_identify.sas_address);
if (expander_sibling) {
_scsih_expander_remove(ioc,
- expander_sibling->handle);
+ expander_sibling->sas_address);
goto retry_again;
}
}
@@ -5749,7 +6044,7 @@
}
sas_remove_host(shost);
- mpt2sas_base_detach(ioc);
+ _scsih_shutdown(pdev);
list_del(&ioc->list);
scsi_remove_host(shost);
scsi_host_put(shost);
@@ -5770,7 +6065,8 @@
void *device;
struct _sas_device *sas_device;
struct _raid_device *raid_device;
- u16 handle, parent_handle;
+ u16 handle;
+ u64 sas_address_parent;
u64 sas_address;
unsigned long flags;
int rc;
@@ -5799,17 +6095,17 @@
} else {
sas_device = device;
handle = sas_device->handle;
- parent_handle = sas_device->parent_handle;
+ sas_address_parent = sas_device->sas_address_parent;
sas_address = sas_device->sas_address;
spin_lock_irqsave(&ioc->sas_device_lock, flags);
list_move_tail(&sas_device->list, &ioc->sas_device_list);
spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
if (!mpt2sas_transport_port_add(ioc, sas_device->handle,
- sas_device->parent_handle)) {
+ sas_device->sas_address_parent)) {
_scsih_sas_device_remove(ioc, sas_device);
} else if (!sas_device->starget) {
mpt2sas_transport_port_remove(ioc, sas_address,
- parent_handle);
+ sas_address_parent);
_scsih_sas_device_remove(ioc, sas_device);
}
}
@@ -5849,8 +6145,6 @@
{
struct _sas_device *sas_device, *next;
unsigned long flags;
- u16 handle, parent_handle;
- u64 sas_address;
/* SAS Device List */
list_for_each_entry_safe(sas_device, next, &ioc->sas_device_init_list,
@@ -5859,14 +6153,13 @@
list_move_tail(&sas_device->list, &ioc->sas_device_list);
spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
- handle = sas_device->handle;
- parent_handle = sas_device->parent_handle;
- sas_address = sas_device->sas_address;
- if (!mpt2sas_transport_port_add(ioc, handle, parent_handle)) {
+ if (!mpt2sas_transport_port_add(ioc, sas_device->handle,
+ sas_device->sas_address_parent)) {
_scsih_sas_device_remove(ioc, sas_device);
} else if (!sas_device->starget) {
- mpt2sas_transport_port_remove(ioc, sas_address,
- parent_handle);
+ mpt2sas_transport_port_remove(ioc,
+ sas_device->sas_address,
+ sas_device->sas_address_parent);
_scsih_sas_device_remove(ioc, sas_device);
}
}
@@ -5935,6 +6228,7 @@
ioc->ctl_cb_idx = ctl_cb_idx;
ioc->base_cb_idx = base_cb_idx;
ioc->transport_cb_idx = transport_cb_idx;
+ ioc->scsih_cb_idx = scsih_cb_idx;
ioc->config_cb_idx = config_cb_idx;
ioc->tm_tr_cb_idx = tm_tr_cb_idx;
ioc->tm_sas_control_cb_idx = tm_sas_control_cb_idx;
@@ -6072,6 +6366,7 @@
.id_table = scsih_pci_table,
.probe = _scsih_probe,
.remove = __devexit_p(_scsih_remove),
+ .shutdown = _scsih_shutdown,
#ifdef CONFIG_PM
.suspend = _scsih_suspend,
.resume = _scsih_resume,
@@ -6113,6 +6408,9 @@
transport_cb_idx = mpt2sas_base_register_callback_handler(
mpt2sas_transport_done);
+ /* scsih internal commands callback handler */
+ scsih_cb_idx = mpt2sas_base_register_callback_handler(_scsih_done);
+
/* configuration page API internal commands callback handler */
config_cb_idx = mpt2sas_base_register_callback_handler(
mpt2sas_config_done);
@@ -6152,6 +6450,7 @@
mpt2sas_base_release_callback_handler(tm_cb_idx);
mpt2sas_base_release_callback_handler(base_cb_idx);
mpt2sas_base_release_callback_handler(transport_cb_idx);
+ mpt2sas_base_release_callback_handler(scsih_cb_idx);
mpt2sas_base_release_callback_handler(config_cb_idx);
mpt2sas_base_release_callback_handler(ctl_cb_idx);
diff --git a/drivers/scsi/mpt2sas/mpt2sas_transport.c b/drivers/scsi/mpt2sas/mpt2sas_transport.c
index eb98188..3a82872 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_transport.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_transport.c
@@ -59,24 +59,23 @@
#include "mpt2sas_base.h"
/**
- * _transport_sas_node_find_by_handle - sas node search
+ * _transport_sas_node_find_by_sas_address - sas node search
* @ioc: per adapter object
- * @handle: expander or hba handle (assigned by firmware)
+ * @sas_address: sas address of expander or sas host
* Context: Calling function should acquire ioc->sas_node_lock.
*
* Search for either hba phys or expander device based on handle, then returns
* the sas_node object.
*/
static struct _sas_node *
-_transport_sas_node_find_by_handle(struct MPT2SAS_ADAPTER *ioc, u16 handle)
+_transport_sas_node_find_by_sas_address(struct MPT2SAS_ADAPTER *ioc,
+ u64 sas_address)
{
- int i;
-
- for (i = 0; i < ioc->sas_hba.num_phys; i++)
- if (ioc->sas_hba.phy[i].handle == handle)
- return &ioc->sas_hba;
-
- return mpt2sas_scsih_expander_find_by_handle(ioc, handle);
+ if (ioc->sas_hba.sas_address == sas_address)
+ return &ioc->sas_hba;
+ else
+ return mpt2sas_scsih_expander_find_by_sas_address(ioc,
+ sas_address);
}
/**
@@ -259,8 +258,7 @@
u8 response_length;
u16 expander_change_count;
u8 reserved0[2];
- u8 sas_format:1;
- u8 reserved1:7;
+ u8 sas_format;
u8 reserved2[3];
u8 vendor_id[SAS_EXPANDER_VENDOR_ID_LEN];
u8 product_id[SAS_EXPANDER_PRODUCT_ID_LEN];
@@ -375,7 +373,8 @@
mpi_request->VP_ID = 0;
sas_address_le = (u64 *)&mpi_request->SASAddress;
*sas_address_le = cpu_to_le64(sas_address);
- mpi_request->RequestDataLength = sizeof(struct rep_manu_request);
+ mpi_request->RequestDataLength =
+ cpu_to_le16(sizeof(struct rep_manu_request));
psge = &mpi_request->SGL;
/* WRITE sgel first */
@@ -438,8 +437,8 @@
SAS_EXPANDER_PRODUCT_ID_LEN);
strncpy(edev->product_rev, manufacture_reply->product_rev,
SAS_EXPANDER_PRODUCT_REV_LEN);
- edev->level = manufacture_reply->sas_format;
- if (manufacture_reply->sas_format) {
+ edev->level = manufacture_reply->sas_format & 1;
+ if (edev->level) {
strncpy(edev->component_vendor_id,
manufacture_reply->component_vendor_id,
SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN);
@@ -469,7 +468,7 @@
* mpt2sas_transport_port_add - insert port to the list
* @ioc: per adapter object
* @handle: handle of attached device
- * @parent_handle: parent handle(either hba or expander)
+ * @sas_address: sas address of parent expander or sas host
* Context: This function will acquire ioc->sas_node_lock.
*
* Adding new port object to the sas_node->sas_port_list.
@@ -478,7 +477,7 @@
*/
struct _sas_port *
mpt2sas_transport_port_add(struct MPT2SAS_ADAPTER *ioc, u16 handle,
- u16 parent_handle)
+ u64 sas_address)
{
struct _sas_phy *mpt2sas_phy, *next;
struct _sas_port *mpt2sas_port;
@@ -488,9 +487,6 @@
int i;
struct sas_port *port;
- if (!parent_handle)
- return NULL;
-
mpt2sas_port = kzalloc(sizeof(struct _sas_port),
GFP_KERNEL);
if (!mpt2sas_port) {
@@ -502,17 +498,16 @@
INIT_LIST_HEAD(&mpt2sas_port->port_list);
INIT_LIST_HEAD(&mpt2sas_port->phy_list);
spin_lock_irqsave(&ioc->sas_node_lock, flags);
- sas_node = _transport_sas_node_find_by_handle(ioc, parent_handle);
+ sas_node = _transport_sas_node_find_by_sas_address(ioc, sas_address);
spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
if (!sas_node) {
- printk(MPT2SAS_ERR_FMT "%s: Could not find parent(0x%04x)!\n",
- ioc->name, __func__, parent_handle);
+ printk(MPT2SAS_ERR_FMT "%s: Could not find "
+ "parent sas_address(0x%016llx)!\n", ioc->name,
+ __func__, (unsigned long long)sas_address);
goto out_fail;
}
- mpt2sas_port->handle = parent_handle;
- mpt2sas_port->sas_address = sas_node->sas_address;
if ((_transport_set_identify(ioc, handle,
&mpt2sas_port->remote_identify))) {
printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
@@ -604,7 +599,7 @@
* mpt2sas_transport_port_remove - remove port from the list
* @ioc: per adapter object
* @sas_address: sas address of attached device
- * @parent_handle: handle to the upstream parent(either hba or expander)
+ * @sas_address_parent: sas address of parent expander or sas host
* Context: This function will acquire ioc->sas_node_lock.
*
* Removing object and freeing associated memory from the
@@ -614,7 +609,7 @@
*/
void
mpt2sas_transport_port_remove(struct MPT2SAS_ADAPTER *ioc, u64 sas_address,
- u16 parent_handle)
+ u64 sas_address_parent)
{
int i;
unsigned long flags;
@@ -624,7 +619,8 @@
struct _sas_phy *mpt2sas_phy, *next_phy;
spin_lock_irqsave(&ioc->sas_node_lock, flags);
- sas_node = _transport_sas_node_find_by_handle(ioc, parent_handle);
+ sas_node = _transport_sas_node_find_by_sas_address(ioc,
+ sas_address_parent);
spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
if (!sas_node)
return;
@@ -650,8 +646,7 @@
&mpt2sas_port->phy_list, port_siblings) {
if ((ioc->logging_level & MPT_DEBUG_TRANSPORT))
dev_printk(KERN_INFO, &mpt2sas_port->port->dev,
- "remove: parent_handle(0x%04x), "
- "sas_addr(0x%016llx), phy(%d)\n", parent_handle,
+ "remove: sas_addr(0x%016llx), phy(%d)\n",
(unsigned long long)
mpt2sas_port->remote_identify.sas_address,
mpt2sas_phy->phy_id);
@@ -799,8 +794,8 @@
/**
* mpt2sas_transport_update_links - refreshing phy link changes
* @ioc: per adapter object
- * @handle: handle to sas_host or expander
- * @attached_handle: attached device handle
+ * @sas_address: sas address of parent expander or sas host
+ * @handle: attached device handle
* @phy_numberv: phy number
* @link_rate: new link rate
*
@@ -808,28 +803,25 @@
*/
void
mpt2sas_transport_update_links(struct MPT2SAS_ADAPTER *ioc,
- u16 handle, u16 attached_handle, u8 phy_number, u8 link_rate)
+ u64 sas_address, u16 handle, u8 phy_number, u8 link_rate)
{
unsigned long flags;
struct _sas_node *sas_node;
struct _sas_phy *mpt2sas_phy;
- if (ioc->shost_recovery) {
- printk(MPT2SAS_INFO_FMT "%s: host reset in progress!\n",
- __func__, ioc->name);
+ if (ioc->shost_recovery)
return;
- }
spin_lock_irqsave(&ioc->sas_node_lock, flags);
- sas_node = _transport_sas_node_find_by_handle(ioc, handle);
+ sas_node = _transport_sas_node_find_by_sas_address(ioc, sas_address);
spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
if (!sas_node)
return;
mpt2sas_phy = &sas_node->phy[phy_number];
- mpt2sas_phy->attached_handle = attached_handle;
- if (attached_handle && (link_rate >= MPI2_SAS_NEG_LINK_RATE_1_5))
- _transport_set_identify(ioc, mpt2sas_phy->attached_handle,
+ mpt2sas_phy->attached_handle = handle;
+ if (handle && (link_rate >= MPI2_SAS_NEG_LINK_RATE_1_5))
+ _transport_set_identify(ioc, handle,
&mpt2sas_phy->remote_identify);
else
memset(&mpt2sas_phy->remote_identify, 0 , sizeof(struct
@@ -841,13 +833,11 @@
if ((ioc->logging_level & MPT_DEBUG_TRANSPORT))
dev_printk(KERN_INFO, &mpt2sas_phy->phy->dev,
- "refresh: handle(0x%04x), sas_addr(0x%016llx),\n"
+ "refresh: parent sas_addr(0x%016llx),\n"
"\tlink_rate(0x%02x), phy(%d)\n"
"\tattached_handle(0x%04x), sas_addr(0x%016llx)\n",
- handle, (unsigned long long)
- mpt2sas_phy->identify.sas_address, link_rate,
- phy_number, attached_handle,
- (unsigned long long)
+ (unsigned long long)sas_address,
+ link_rate, phy_number, handle, (unsigned long long)
mpt2sas_phy->remote_identify.sas_address);
}
@@ -1126,7 +1116,7 @@
dma_addr_out = pci_map_single(ioc->pdev, bio_data(req->bio),
blk_rq_bytes(req), PCI_DMA_BIDIRECTIONAL);
if (!dma_addr_out) {
- mpt2sas_base_free_smid(ioc, le16_to_cpu(smid));
+ mpt2sas_base_free_smid(ioc, smid);
goto unmap;
}
@@ -1144,7 +1134,7 @@
dma_addr_in = pci_map_single(ioc->pdev, bio_data(rsp->bio),
blk_rq_bytes(rsp), PCI_DMA_BIDIRECTIONAL);
if (!dma_addr_in) {
- mpt2sas_base_free_smid(ioc, le16_to_cpu(smid));
+ mpt2sas_base_free_smid(ioc, smid);
goto unmap;
}
diff --git a/drivers/scsi/ncr53c8xx.c b/drivers/scsi/ncr53c8xx.c
index e3c482a..a2d5698 100644
--- a/drivers/scsi/ncr53c8xx.c
+++ b/drivers/scsi/ncr53c8xx.c
@@ -6495,7 +6495,7 @@
** we force a SIR_NEGO_PROTO interrupt (it is a hack that avoids
** bloat for such a should_not_happen situation).
** In all other situation, we reset the BUS.
- ** Are these assumptions reasonnable ? (Wait and see ...)
+ ** Are these assumptions reasonable ? (Wait and see ...)
*/
unexpected_phase:
dsp -= 8;
diff --git a/drivers/scsi/nsp32.c b/drivers/scsi/nsp32.c
index 2be7d5b..2c98a6e 100644
--- a/drivers/scsi/nsp32.c
+++ b/drivers/scsi/nsp32.c
@@ -1419,7 +1419,7 @@
nsp32_msg(KERN_ERR, "Received unexpected BMCNTERR IRQ! ");
/*
* TODO: To be implemented improving bus master
- * transfer reliablity when BMCNTERR is occurred in
+ * transfer reliability when BMCNTERR is occurred in
* AutoSCSI phase described in specification.
*/
}
diff --git a/drivers/scsi/osd/osd_initiator.c b/drivers/scsi/osd/osd_initiator.c
index 7a117c1..950202a 100644
--- a/drivers/scsi/osd/osd_initiator.c
+++ b/drivers/scsi/osd/osd_initiator.c
@@ -73,7 +73,8 @@
#define ATTR_DEF_RI(id, len) ATTR_DEF(OSD_APAGE_ROOT_INFORMATION, id, len)
-static int _osd_print_system_info(struct osd_dev *od, void *caps)
+static int _osd_get_print_system_info(struct osd_dev *od,
+ void *caps, struct osd_dev_info *odi)
{
struct osd_request *or;
struct osd_attr get_attrs[] = {
@@ -137,8 +138,12 @@
OSD_INFO("PRODUCT_SERIAL_NUMBER [%s]\n",
(char *)pFirst);
- pFirst = get_attrs[a].val_ptr;
- OSD_INFO("OSD_NAME [%s]\n", (char *)pFirst);
+ odi->osdname_len = get_attrs[a].len;
+ /* Avoid NULL for memcmp optimization 0-length is good enough */
+ odi->osdname = kzalloc(odi->osdname_len + 1, GFP_KERNEL);
+ if (odi->osdname_len)
+ memcpy(odi->osdname, get_attrs[a].val_ptr, odi->osdname_len);
+ OSD_INFO("OSD_NAME [%s]\n", odi->osdname);
a++;
pFirst = get_attrs[a++].val_ptr;
@@ -171,6 +176,14 @@
sid_dump, sizeof(sid_dump), true);
OSD_INFO("OSD_SYSTEM_ID(%d)\n"
" [%s]\n", len, sid_dump);
+
+ if (unlikely(len > sizeof(odi->systemid))) {
+ OSD_ERR("OSD Target error: OSD_SYSTEM_ID too long(%d). "
+ "device idetification might not work\n", len);
+ len = sizeof(odi->systemid);
+ }
+ odi->systemid_len = len;
+ memcpy(odi->systemid, get_attrs[a].val_ptr, len);
a++;
}
out:
@@ -178,16 +191,17 @@
return ret;
}
-int osd_auto_detect_ver(struct osd_dev *od, void *caps)
+int osd_auto_detect_ver(struct osd_dev *od,
+ void *caps, struct osd_dev_info *odi)
{
int ret;
/* Auto-detect the osd version */
- ret = _osd_print_system_info(od, caps);
+ ret = _osd_get_print_system_info(od, caps, odi);
if (ret) {
osd_dev_set_ver(od, OSD_VER1);
OSD_DEBUG("converting to OSD1\n");
- ret = _osd_print_system_info(od, caps);
+ ret = _osd_get_print_system_info(od, caps, odi);
}
return ret;
@@ -461,7 +475,8 @@
int osd_execute_request(struct osd_request *or)
{
- return blk_execute_rq(or->request->q, NULL, or->request, 0);
+ return or->async_error =
+ blk_execute_rq(or->request->q, NULL, or->request, 0);
}
EXPORT_SYMBOL(osd_execute_request);
@@ -471,8 +486,12 @@
or->async_error = error;
- if (error)
- OSD_DEBUG("osd_request_async_done error recieved %d\n", error);
+ if (unlikely(error)) {
+ OSD_DEBUG("osd_request_async_done error recieved %d "
+ "errors 0x%x\n", error, req->errors);
+ if (!req->errors) /* don't miss out on this one */
+ req->errors = error;
+ }
if (or->async_done)
or->async_done(or, or->async_private);
@@ -1153,6 +1172,7 @@
"c=%d r=%d n=%d\n",
cur_bytes, returned_bytes, n);
oa->val_ptr = NULL;
+ cur_bytes = returned_bytes; /* break the caller loop */
break;
}
@@ -1436,6 +1456,15 @@
}
EXPORT_SYMBOL(osd_finalize_request);
+static bool _is_osd_security_code(int code)
+{
+ return (code == osd_security_audit_value_frozen) ||
+ (code == osd_security_working_key_frozen) ||
+ (code == osd_nonce_not_unique) ||
+ (code == osd_nonce_timestamp_out_of_range) ||
+ (code == osd_invalid_dataout_buffer_integrity_check_value);
+}
+
#define OSD_SENSE_PRINT1(fmt, a...) \
do { \
if (__cur_sense_need_output) \
@@ -1458,9 +1487,16 @@
#else
bool __cur_sense_need_output = !silent;
#endif
+ int ret;
- if (!or->request->errors)
+ if (likely(!or->request->errors)) {
+ osi->out_resid = 0;
+ osi->in_resid = 0;
return 0;
+ }
+
+ osi = osi ? : &local_osi;
+ memset(osi, 0, sizeof(*osi));
ssdb = or->request->sense;
sense_len = or->request->sense_len;
@@ -1468,17 +1504,15 @@
OSD_ERR("Block-layer returned error(0x%x) but "
"sense_len(%u) || key(%d) is empty\n",
or->request->errors, sense_len, ssdb->sense_key);
- return -EIO;
+ goto analyze;
}
if ((ssdb->response_code != 0x72) && (ssdb->response_code != 0x73)) {
OSD_ERR("Unrecognized scsi sense: rcode=%x length=%d\n",
ssdb->response_code, sense_len);
- return -EIO;
+ goto analyze;
}
- osi = osi ? : &local_osi;
- memset(osi, 0, sizeof(*osi));
osi->key = ssdb->sense_key;
osi->additional_code = be16_to_cpu(ssdb->additional_sense_code);
original_sense_len = ssdb->additional_sense_length + 8;
@@ -1488,9 +1522,10 @@
__cur_sense_need_output = (osi->key > scsi_sk_recovered_error);
#endif
OSD_SENSE_PRINT1("Main Sense information key=0x%x length(%d, %d) "
- "additional_code=0x%x\n",
+ "additional_code=0x%x async_error=%d errors=0x%x\n",
osi->key, original_sense_len, sense_len,
- osi->additional_code);
+ osi->additional_code, or->async_error,
+ or->request->errors);
if (original_sense_len < sense_len)
sense_len = original_sense_len;
@@ -1569,15 +1604,14 @@
{
struct osd_sense_attributes_data_descriptor
*osadd = cur_descriptor;
- int len = min(cur_len, sense_len);
- int i = 0;
+ unsigned len = min(cur_len, sense_len);
struct osd_sense_attr *pattr = osadd->sense_attrs;
- while (len < 0) {
+ while (len >= sizeof(*pattr)) {
u32 attr_page = be32_to_cpu(pattr->attr_page);
u32 attr_id = be32_to_cpu(pattr->attr_id);
- if (i++ == 0) {
+ if (!osi->attr.attr_page) {
osi->attr.attr_page = attr_page;
osi->attr.attr_id = attr_id;
}
@@ -1588,6 +1622,8 @@
bad_attr_list++;
max_attr--;
}
+
+ len -= sizeof(*pattr);
OSD_SENSE_PRINT2(
"osd_sense_attribute_identification"
"attr_page=0x%x attr_id=0x%x\n",
@@ -1621,7 +1657,50 @@
cur_descriptor += cur_len;
}
- return (osi->key > scsi_sk_recovered_error) ? -EIO : 0;
+analyze:
+ if (!osi->key) {
+ /* scsi sense is Empty, the request was never issued to target
+ * linux return code might tell us what happened.
+ */
+ if (or->async_error == -ENOMEM)
+ osi->osd_err_pri = OSD_ERR_PRI_RESOURCE;
+ else
+ osi->osd_err_pri = OSD_ERR_PRI_UNREACHABLE;
+ ret = or->async_error;
+ } else if (osi->key <= scsi_sk_recovered_error) {
+ osi->osd_err_pri = 0;
+ ret = 0;
+ } else if (osi->additional_code == scsi_invalid_field_in_cdb) {
+ if (osi->cdb_field_offset == OSD_CFO_STARTING_BYTE) {
+ osi->osd_err_pri = OSD_ERR_PRI_CLEAR_PAGES;
+ ret = -EFAULT; /* caller should recover from this */
+ } else if (osi->cdb_field_offset == OSD_CFO_OBJECT_ID) {
+ osi->osd_err_pri = OSD_ERR_PRI_NOT_FOUND;
+ ret = -ENOENT;
+ } else if (osi->cdb_field_offset == OSD_CFO_PERMISSIONS) {
+ osi->osd_err_pri = OSD_ERR_PRI_NO_ACCESS;
+ ret = -EACCES;
+ } else {
+ osi->osd_err_pri = OSD_ERR_PRI_BAD_CRED;
+ ret = -EINVAL;
+ }
+ } else if (osi->additional_code == osd_quota_error) {
+ osi->osd_err_pri = OSD_ERR_PRI_NO_SPACE;
+ ret = -ENOSPC;
+ } else if (_is_osd_security_code(osi->additional_code)) {
+ osi->osd_err_pri = OSD_ERR_PRI_BAD_CRED;
+ ret = -EINVAL;
+ } else {
+ osi->osd_err_pri = OSD_ERR_PRI_EIO;
+ ret = -EIO;
+ }
+
+ if (or->out.req)
+ osi->out_resid = or->out.req->resid_len ?: or->out.total_bytes;
+ if (or->in.req)
+ osi->in_resid = or->in.req->resid_len ?: or->in.total_bytes;
+
+ return ret;
}
EXPORT_SYMBOL(osd_req_decode_sense_full);
diff --git a/drivers/scsi/osd/osd_uld.c b/drivers/scsi/osd/osd_uld.c
index 0bdef33..0a90702 100644
--- a/drivers/scsi/osd/osd_uld.c
+++ b/drivers/scsi/osd/osd_uld.c
@@ -71,8 +71,7 @@
#define SCSI_OSD_MAX_MINOR 64
static const char osd_name[] = "osd";
-static const char *osd_version_string = "open-osd 0.1.0";
-const char osd_symlink[] = "scsi_osd";
+static const char *osd_version_string = "open-osd 0.2.0";
MODULE_AUTHOR("Boaz Harrosh <bharrosh@panasas.com>");
MODULE_DESCRIPTION("open-osd Upper-Layer-Driver osd.ko");
@@ -82,15 +81,25 @@
struct osd_uld_device {
int minor;
- struct kref kref;
+ struct device class_dev;
struct cdev cdev;
struct osd_dev od;
+ struct osd_dev_info odi;
struct gendisk *disk;
- struct device *class_member;
};
-static void __uld_get(struct osd_uld_device *oud);
-static void __uld_put(struct osd_uld_device *oud);
+struct osd_dev_handle {
+ struct osd_dev od;
+ struct file *file;
+ struct osd_uld_device *oud;
+} ;
+
+static DEFINE_IDA(osd_minor_ida);
+
+static struct class osd_uld_class = {
+ .owner = THIS_MODULE,
+ .name = "scsi_osd",
+};
/*
* Char Device operations
@@ -101,7 +110,7 @@
struct osd_uld_device *oud = container_of(inode->i_cdev,
struct osd_uld_device, cdev);
- __uld_get(oud);
+ get_device(&oud->class_dev);
/* cache osd_uld_device on file handle */
file->private_data = oud;
OSD_DEBUG("osd_uld_open %p\n", oud);
@@ -114,7 +123,7 @@
OSD_DEBUG("osd_uld_release %p\n", file->private_data);
file->private_data = NULL;
- __uld_put(oud);
+ put_device(&oud->class_dev);
return 0;
}
@@ -177,7 +186,7 @@
struct osd_dev *osduld_path_lookup(const char *name)
{
struct osd_uld_device *oud;
- struct osd_dev *od;
+ struct osd_dev_handle *odh;
struct file *file;
int error;
@@ -186,8 +195,8 @@
return ERR_PTR(-EINVAL);
}
- od = kzalloc(sizeof(*od), GFP_KERNEL);
- if (!od)
+ odh = kzalloc(sizeof(*odh), GFP_KERNEL);
+ if (unlikely(!odh))
return ERR_PTR(-ENOMEM);
file = filp_open(name, O_RDWR, 0);
@@ -203,33 +212,134 @@
oud = file->private_data;
- *od = oud->od;
- od->file = file;
+ odh->od = oud->od;
+ odh->file = file;
+ odh->oud = oud;
- return od;
+ return &odh->od;
close_file:
fput(file);
free_od:
- kfree(od);
+ kfree(odh);
return ERR_PTR(error);
}
EXPORT_SYMBOL(osduld_path_lookup);
+static inline bool _the_same_or_null(const u8 *a1, unsigned a1_len,
+ const u8 *a2, unsigned a2_len)
+{
+ if (!a2_len) /* User string is Empty means don't care */
+ return true;
+
+ if (a1_len != a2_len)
+ return false;
+
+ return 0 == memcmp(a1, a2, a1_len);
+}
+
+struct find_oud_t {
+ const struct osd_dev_info *odi;
+ struct device *dev;
+ struct osd_uld_device *oud;
+} ;
+
+int _mach_odi(struct device *dev, void *find_data)
+{
+ struct osd_uld_device *oud = container_of(dev, struct osd_uld_device,
+ class_dev);
+ struct find_oud_t *fot = find_data;
+ const struct osd_dev_info *odi = fot->odi;
+
+ if (_the_same_or_null(oud->odi.systemid, oud->odi.systemid_len,
+ odi->systemid, odi->systemid_len) &&
+ _the_same_or_null(oud->odi.osdname, oud->odi.osdname_len,
+ odi->osdname, odi->osdname_len)) {
+ OSD_DEBUG("found device sysid_len=%d osdname=%d\n",
+ odi->systemid_len, odi->osdname_len);
+ fot->oud = oud;
+ return 1;
+ } else {
+ return 0;
+ }
+}
+
+/* osduld_info_lookup - Loop through all devices, return the requested osd_dev.
+ *
+ * if @odi->systemid_len and/or @odi->osdname_len are zero, they act as a don't
+ * care. .e.g if they're both zero /dev/osd0 is returned.
+ */
+struct osd_dev *osduld_info_lookup(const struct osd_dev_info *odi)
+{
+ struct find_oud_t find = {.odi = odi};
+
+ find.dev = class_find_device(&osd_uld_class, NULL, &find, _mach_odi);
+ if (likely(find.dev)) {
+ struct osd_dev_handle *odh = kzalloc(sizeof(*odh), GFP_KERNEL);
+
+ if (unlikely(!odh)) {
+ put_device(find.dev);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ odh->od = find.oud->od;
+ odh->oud = find.oud;
+
+ return &odh->od;
+ }
+
+ return ERR_PTR(-ENODEV);
+}
+EXPORT_SYMBOL(osduld_info_lookup);
+
void osduld_put_device(struct osd_dev *od)
{
-
if (od && !IS_ERR(od)) {
- struct osd_uld_device *oud = od->file->private_data;
+ struct osd_dev_handle *odh =
+ container_of(od, struct osd_dev_handle, od);
+ struct osd_uld_device *oud = odh->oud;
BUG_ON(od->scsi_device != oud->od.scsi_device);
- fput(od->file);
- kfree(od);
+ /* If scsi has released the device (logout), and exofs has last
+ * reference on oud it will be freed by above osd_uld_release
+ * within fput below. But this will oops in cdev_release which
+ * is called after the fops->release. A get_/put_ pair makes
+ * sure we have a cdev for the duration of fput
+ */
+ if (odh->file) {
+ get_device(&oud->class_dev);
+ fput(odh->file);
+ }
+ put_device(&oud->class_dev);
+ kfree(odh);
}
}
EXPORT_SYMBOL(osduld_put_device);
+const struct osd_dev_info *osduld_device_info(struct osd_dev *od)
+{
+ struct osd_dev_handle *odh =
+ container_of(od, struct osd_dev_handle, od);
+ return &odh->oud->odi;
+}
+EXPORT_SYMBOL(osduld_device_info);
+
+bool osduld_device_same(struct osd_dev *od, const struct osd_dev_info *odi)
+{
+ struct osd_dev_handle *odh =
+ container_of(od, struct osd_dev_handle, od);
+ struct osd_uld_device *oud = odh->oud;
+
+ return (oud->odi.systemid_len == odi->systemid_len) &&
+ _the_same_or_null(oud->odi.systemid, oud->odi.systemid_len,
+ odi->systemid, odi->systemid_len) &&
+ (oud->odi.osdname_len == odi->osdname_len) &&
+ _the_same_or_null(oud->odi.osdname, oud->odi.osdname_len,
+ odi->osdname, odi->osdname_len);
+}
+EXPORT_SYMBOL(osduld_device_same);
+
/*
* Scsi Device operations
*/
@@ -250,14 +360,35 @@
OSD_ERR("warning: scsi_test_unit_ready failed\n");
osd_sec_init_nosec_doall_caps(caps, &osd_root_object, false, true);
- if (osd_auto_detect_ver(&oud->od, caps))
+ if (osd_auto_detect_ver(&oud->od, caps, &oud->odi))
return -ENODEV;
return 0;
}
-static struct class *osd_sysfs_class;
-static DEFINE_IDA(osd_minor_ida);
+static void __remove(struct device *dev)
+{
+ struct osd_uld_device *oud = container_of(dev, struct osd_uld_device,
+ class_dev);
+ struct scsi_device *scsi_device = oud->od.scsi_device;
+
+ kfree(oud->odi.osdname);
+
+ if (oud->cdev.owner)
+ cdev_del(&oud->cdev);
+
+ osd_dev_fini(&oud->od);
+ scsi_device_put(scsi_device);
+
+ OSD_INFO("osd_remove %s\n",
+ oud->disk ? oud->disk->disk_name : NULL);
+
+ if (oud->disk)
+ put_disk(oud->disk);
+ ida_remove(&osd_minor_ida, oud->minor);
+
+ kfree(oud);
+}
static int osd_probe(struct device *dev)
{
@@ -289,7 +420,6 @@
if (NULL == oud)
goto err_retract_minor;
- kref_init(&oud->kref);
dev_set_drvdata(dev, oud);
oud->minor = minor;
@@ -327,18 +457,25 @@
OSD_ERR("cdev_add failed\n");
goto err_put_disk;
}
- kobject_get(&oud->cdev.kobj); /* 2nd ref see osd_remove() */
- /* class_member */
- oud->class_member = device_create(osd_sysfs_class, dev,
- MKDEV(SCSI_OSD_MAJOR, oud->minor), "%s", disk->disk_name);
- if (IS_ERR(oud->class_member)) {
- OSD_ERR("class_device_create failed\n");
- error = PTR_ERR(oud->class_member);
+ /* class device member */
+ oud->class_dev.devt = oud->cdev.dev;
+ oud->class_dev.class = &osd_uld_class;
+ oud->class_dev.parent = dev;
+ oud->class_dev.release = __remove;
+ error = dev_set_name(&oud->class_dev, disk->disk_name);
+ if (error) {
+ OSD_ERR("dev_set_name failed => %d\n", error);
goto err_put_cdev;
}
- dev_set_drvdata(oud->class_member, oud);
+ error = device_register(&oud->class_dev);
+ if (error) {
+ OSD_ERR("device_register failed => %d\n", error);
+ goto err_put_cdev;
+ }
+
+ get_device(&oud->class_dev);
OSD_INFO("osd_probe %s\n", disk->disk_name);
return 0;
@@ -367,54 +504,12 @@
scsi_device);
}
- if (oud->class_member)
- device_destroy(osd_sysfs_class,
- MKDEV(SCSI_OSD_MAJOR, oud->minor));
+ device_unregister(&oud->class_dev);
- /* We have 2 references to the cdev. One is released here
- * and also takes down the /dev/osdX mapping. The second
- * Will be released in __remove() after all users have released
- * the osd_uld_device.
- */
- if (oud->cdev.owner)
- cdev_del(&oud->cdev);
-
- __uld_put(oud);
+ put_device(&oud->class_dev);
return 0;
}
-static void __remove(struct kref *kref)
-{
- struct osd_uld_device *oud = container_of(kref,
- struct osd_uld_device, kref);
- struct scsi_device *scsi_device = oud->od.scsi_device;
-
- /* now let delete the char_dev */
- kobject_put(&oud->cdev.kobj);
-
- osd_dev_fini(&oud->od);
- scsi_device_put(scsi_device);
-
- OSD_INFO("osd_remove %s\n",
- oud->disk ? oud->disk->disk_name : NULL);
-
- if (oud->disk)
- put_disk(oud->disk);
-
- ida_remove(&osd_minor_ida, oud->minor);
- kfree(oud);
-}
-
-static void __uld_get(struct osd_uld_device *oud)
-{
- kref_get(&oud->kref);
-}
-
-static void __uld_put(struct osd_uld_device *oud)
-{
- kref_put(&oud->kref, __remove);
-}
-
/*
* Global driver and scsi registration
*/
@@ -432,11 +527,10 @@
{
int err;
- osd_sysfs_class = class_create(THIS_MODULE, osd_symlink);
- if (IS_ERR(osd_sysfs_class)) {
- OSD_ERR("Unable to register sysfs class => %ld\n",
- PTR_ERR(osd_sysfs_class));
- return PTR_ERR(osd_sysfs_class);
+ err = class_register(&osd_uld_class);
+ if (err) {
+ OSD_ERR("Unable to register sysfs class => %d\n", err);
+ return err;
}
err = register_chrdev_region(MKDEV(SCSI_OSD_MAJOR, 0),
@@ -459,7 +553,7 @@
err_out_chrdev:
unregister_chrdev_region(MKDEV(SCSI_OSD_MAJOR, 0), SCSI_OSD_MAX_MINOR);
err_out:
- class_destroy(osd_sysfs_class);
+ class_unregister(&osd_uld_class);
return err;
}
@@ -467,7 +561,7 @@
{
scsi_unregister_driver(&osd_driver.gendrv);
unregister_chrdev_region(MKDEV(SCSI_OSD_MAJOR, 0), SCSI_OSD_MAX_MINOR);
- class_destroy(osd_sysfs_class);
+ class_unregister(&osd_uld_class);
OSD_INFO("UNLOADED %s\n", osd_version_string);
}
diff --git a/drivers/scsi/pm8001/Makefile b/drivers/scsi/pm8001/Makefile
new file mode 100644
index 0000000..52f0429
--- /dev/null
+++ b/drivers/scsi/pm8001/Makefile
@@ -0,0 +1,12 @@
+#
+# Kernel configuration file for the PM8001 SAS/SATA 8x6G based HBA driver
+#
+# Copyright (C) 2008-2009 USI Co., Ltd.
+
+
+obj-$(CONFIG_SCSI_PM8001) += pm8001.o
+pm8001-y += pm8001_init.o \
+ pm8001_sas.o \
+ pm8001_ctl.o \
+ pm8001_hwi.o
+
diff --git a/drivers/scsi/pm8001/pm8001_chips.h b/drivers/scsi/pm8001/pm8001_chips.h
new file mode 100644
index 0000000..4efa4d0
--- /dev/null
+++ b/drivers/scsi/pm8001/pm8001_chips.h
@@ -0,0 +1,89 @@
+/*
+ * PMC-Sierra SPC 8001 SAS/SATA based host adapters driver
+ *
+ * Copyright (c) 2008-2009 USI Co., Ltd.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * substantially similar to the "NO WARRANTY" disclaimer below
+ * ("Disclaimer") and any redistribution must be conditioned upon
+ * including a substantially similar Disclaimer requirement for further
+ * binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ *
+ */
+
+#ifndef _PM8001_CHIPS_H_
+#define _PM8001_CHIPS_H_
+
+static inline u32 pm8001_read_32(void *virt_addr)
+{
+ return *((u32 *)virt_addr);
+}
+
+static inline void pm8001_write_32(void *addr, u32 offset, u32 val)
+{
+ *((u32 *)(addr + offset)) = val;
+}
+
+static inline u32 pm8001_cr32(struct pm8001_hba_info *pm8001_ha, u32 bar,
+ u32 offset)
+{
+ return readl(pm8001_ha->io_mem[bar].memvirtaddr + offset);
+}
+
+static inline void pm8001_cw32(struct pm8001_hba_info *pm8001_ha, u32 bar,
+ u32 addr, u32 val)
+{
+ writel(val, pm8001_ha->io_mem[bar].memvirtaddr + addr);
+}
+static inline u32 pm8001_mr32(void __iomem *addr, u32 offset)
+{
+ return readl(addr + offset);
+}
+static inline void pm8001_mw32(void __iomem *addr, u32 offset, u32 val)
+{
+ writel(val, addr + offset);
+}
+static inline u32 get_pci_bar_index(u32 pcibar)
+{
+ switch (pcibar) {
+ case 0x18:
+ case 0x1C:
+ return 1;
+ case 0x20:
+ return 2;
+ case 0x24:
+ return 3;
+ default:
+ return 0;
+ }
+}
+
+#endif /* _PM8001_CHIPS_H_ */
+
diff --git a/drivers/scsi/pm8001/pm8001_ctl.c b/drivers/scsi/pm8001/pm8001_ctl.c
new file mode 100644
index 0000000..14b13ac
--- /dev/null
+++ b/drivers/scsi/pm8001/pm8001_ctl.c
@@ -0,0 +1,573 @@
+/*
+ * PMC-Sierra SPC 8001 SAS/SATA based host adapters driver
+ *
+ * Copyright (c) 2008-2009 USI Co., Ltd.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * substantially similar to the "NO WARRANTY" disclaimer below
+ * ("Disclaimer") and any redistribution must be conditioned upon
+ * including a substantially similar Disclaimer requirement for further
+ * binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ *
+ */
+#include <linux/firmware.h>
+#include "pm8001_sas.h"
+#include "pm8001_ctl.h"
+
+/* scsi host attributes */
+
+/**
+ * pm8001_ctl_mpi_interface_rev_show - MPI interface revision number
+ * @cdev: pointer to embedded class device
+ * @buf: the buffer returned
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t pm8001_ctl_mpi_interface_rev_show(struct device *cdev,
+ struct device_attribute *attr, char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(cdev);
+ struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+ struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
+
+ return snprintf(buf, PAGE_SIZE, "%d\n",
+ pm8001_ha->main_cfg_tbl.interface_rev);
+}
+static
+DEVICE_ATTR(interface_rev, S_IRUGO, pm8001_ctl_mpi_interface_rev_show, NULL);
+
+/**
+ * pm8001_ctl_fw_version_show - firmware version
+ * @cdev: pointer to embedded class device
+ * @buf: the buffer returned
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t pm8001_ctl_fw_version_show(struct device *cdev,
+ struct device_attribute *attr, char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(cdev);
+ struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+ struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
+
+ return snprintf(buf, PAGE_SIZE, "%02x.%02x.%02x.%02x\n",
+ (u8)(pm8001_ha->main_cfg_tbl.firmware_rev >> 24),
+ (u8)(pm8001_ha->main_cfg_tbl.firmware_rev >> 16),
+ (u8)(pm8001_ha->main_cfg_tbl.firmware_rev >> 8),
+ (u8)(pm8001_ha->main_cfg_tbl.firmware_rev));
+}
+static DEVICE_ATTR(fw_version, S_IRUGO, pm8001_ctl_fw_version_show, NULL);
+/**
+ * pm8001_ctl_max_out_io_show - max outstanding io supported
+ * @cdev: pointer to embedded class device
+ * @buf: the buffer returned
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t pm8001_ctl_max_out_io_show(struct device *cdev,
+ struct device_attribute *attr, char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(cdev);
+ struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+ struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
+
+ return snprintf(buf, PAGE_SIZE, "%d\n",
+ pm8001_ha->main_cfg_tbl.max_out_io);
+}
+static DEVICE_ATTR(max_out_io, S_IRUGO, pm8001_ctl_max_out_io_show, NULL);
+/**
+ * pm8001_ctl_max_devices_show - max devices support
+ * @cdev: pointer to embedded class device
+ * @buf: the buffer returned
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t pm8001_ctl_max_devices_show(struct device *cdev,
+ struct device_attribute *attr, char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(cdev);
+ struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+ struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
+
+ return snprintf(buf, PAGE_SIZE, "%04d\n",
+ (u16)(pm8001_ha->main_cfg_tbl.max_sgl >> 16));
+}
+static DEVICE_ATTR(max_devices, S_IRUGO, pm8001_ctl_max_devices_show, NULL);
+/**
+ * pm8001_ctl_max_sg_list_show - max sg list supported iff not 0.0 for no
+ * hardware limitation
+ * @cdev: pointer to embedded class device
+ * @buf: the buffer returned
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t pm8001_ctl_max_sg_list_show(struct device *cdev,
+ struct device_attribute *attr, char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(cdev);
+ struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+ struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
+
+ return snprintf(buf, PAGE_SIZE, "%04d\n",
+ pm8001_ha->main_cfg_tbl.max_sgl & 0x0000FFFF);
+}
+static DEVICE_ATTR(max_sg_list, S_IRUGO, pm8001_ctl_max_sg_list_show, NULL);
+
+#define SAS_1_0 0x1
+#define SAS_1_1 0x2
+#define SAS_2_0 0x4
+
+static ssize_t
+show_sas_spec_support_status(unsigned int mode, char *buf)
+{
+ ssize_t len = 0;
+
+ if (mode & SAS_1_1)
+ len = sprintf(buf, "%s", "SAS1.1");
+ if (mode & SAS_2_0)
+ len += sprintf(buf + len, "%s%s", len ? ", " : "", "SAS2.0");
+ len += sprintf(buf + len, "\n");
+
+ return len;
+}
+
+/**
+ * pm8001_ctl_sas_spec_support_show - sas spec supported
+ * @cdev: pointer to embedded class device
+ * @buf: the buffer returned
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t pm8001_ctl_sas_spec_support_show(struct device *cdev,
+ struct device_attribute *attr, char *buf)
+{
+ unsigned int mode;
+ struct Scsi_Host *shost = class_to_shost(cdev);
+ struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+ struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
+ mode = (pm8001_ha->main_cfg_tbl.ctrl_cap_flag & 0xfe000000)>>25;
+ return show_sas_spec_support_status(mode, buf);
+}
+static DEVICE_ATTR(sas_spec_support, S_IRUGO,
+ pm8001_ctl_sas_spec_support_show, NULL);
+
+/**
+ * pm8001_ctl_sas_address_show - sas address
+ * @cdev: pointer to embedded class device
+ * @buf: the buffer returned
+ *
+ * This is the controller sas address
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t pm8001_ctl_host_sas_address_show(struct device *cdev,
+ struct device_attribute *attr, char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(cdev);
+ struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+ struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
+ return snprintf(buf, PAGE_SIZE, "0x%016llx\n",
+ be64_to_cpu(*(__be64 *)pm8001_ha->sas_addr));
+}
+static DEVICE_ATTR(host_sas_address, S_IRUGO,
+ pm8001_ctl_host_sas_address_show, NULL);
+
+/**
+ * pm8001_ctl_logging_level_show - logging level
+ * @cdev: pointer to embedded class device
+ * @buf: the buffer returned
+ *
+ * A sysfs 'read/write' shost attribute.
+ */
+static ssize_t pm8001_ctl_logging_level_show(struct device *cdev,
+ struct device_attribute *attr, char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(cdev);
+ struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+ struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
+
+ return snprintf(buf, PAGE_SIZE, "%08xh\n", pm8001_ha->logging_level);
+}
+static ssize_t pm8001_ctl_logging_level_store(struct device *cdev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct Scsi_Host *shost = class_to_shost(cdev);
+ struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+ struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
+ int val = 0;
+
+ if (sscanf(buf, "%x", &val) != 1)
+ return -EINVAL;
+
+ pm8001_ha->logging_level = val;
+ return strlen(buf);
+}
+
+static DEVICE_ATTR(logging_level, S_IRUGO | S_IWUSR,
+ pm8001_ctl_logging_level_show, pm8001_ctl_logging_level_store);
+/**
+ * pm8001_ctl_aap_log_show - aap1 event log
+ * @cdev: pointer to embedded class device
+ * @buf: the buffer returned
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t pm8001_ctl_aap_log_show(struct device *cdev,
+ struct device_attribute *attr, char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(cdev);
+ struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+ struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
+ int i;
+#define AAP1_MEMMAP(r, c) \
+ (*(u32 *)((u8*)pm8001_ha->memoryMap.region[AAP1].virt_ptr + (r) * 32 \
+ + (c)))
+
+ char *str = buf;
+ int max = 2;
+ for (i = 0; i < max; i++) {
+ str += sprintf(str, "0x%08x 0x%08x 0x%08x 0x%08x 0x%08x 0x%08x"
+ "0x%08x 0x%08x\n",
+ AAP1_MEMMAP(i, 0),
+ AAP1_MEMMAP(i, 4),
+ AAP1_MEMMAP(i, 8),
+ AAP1_MEMMAP(i, 12),
+ AAP1_MEMMAP(i, 16),
+ AAP1_MEMMAP(i, 20),
+ AAP1_MEMMAP(i, 24),
+ AAP1_MEMMAP(i, 28));
+ }
+
+ return str - buf;
+}
+static DEVICE_ATTR(aap_log, S_IRUGO, pm8001_ctl_aap_log_show, NULL);
+/**
+ * pm8001_ctl_aap_log_show - IOP event log
+ * @cdev: pointer to embedded class device
+ * @buf: the buffer returned
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t pm8001_ctl_iop_log_show(struct device *cdev,
+ struct device_attribute *attr, char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(cdev);
+ struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+ struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
+#define IOP_MEMMAP(r, c) \
+ (*(u32 *)((u8*)pm8001_ha->memoryMap.region[IOP].virt_ptr + (r) * 32 \
+ + (c)))
+ int i;
+ char *str = buf;
+ int max = 2;
+ for (i = 0; i < max; i++) {
+ str += sprintf(str, "0x%08x 0x%08x 0x%08x 0x%08x 0x%08x 0x%08x"
+ "0x%08x 0x%08x\n",
+ IOP_MEMMAP(i, 0),
+ IOP_MEMMAP(i, 4),
+ IOP_MEMMAP(i, 8),
+ IOP_MEMMAP(i, 12),
+ IOP_MEMMAP(i, 16),
+ IOP_MEMMAP(i, 20),
+ IOP_MEMMAP(i, 24),
+ IOP_MEMMAP(i, 28));
+ }
+
+ return str - buf;
+}
+static DEVICE_ATTR(iop_log, S_IRUGO, pm8001_ctl_iop_log_show, NULL);
+
+#define FLASH_CMD_NONE 0x00
+#define FLASH_CMD_UPDATE 0x01
+#define FLASH_CMD_SET_NVMD 0x02
+
+struct flash_command {
+ u8 command[8];
+ int code;
+};
+
+static struct flash_command flash_command_table[] =
+{
+ {"set_nvmd", FLASH_CMD_SET_NVMD},
+ {"update", FLASH_CMD_UPDATE},
+ {"", FLASH_CMD_NONE} /* Last entry should be NULL. */
+};
+
+struct error_fw {
+ char *reason;
+ int err_code;
+};
+
+static struct error_fw flash_error_table[] =
+{
+ {"Failed to open fw image file", FAIL_OPEN_BIOS_FILE},
+ {"image header mismatch", FLASH_UPDATE_HDR_ERR},
+ {"image offset mismatch", FLASH_UPDATE_OFFSET_ERR},
+ {"image CRC Error", FLASH_UPDATE_CRC_ERR},
+ {"image length Error.", FLASH_UPDATE_LENGTH_ERR},
+ {"Failed to program flash chip", FLASH_UPDATE_HW_ERR},
+ {"Flash chip not supported.", FLASH_UPDATE_DNLD_NOT_SUPPORTED},
+ {"Flash update disabled.", FLASH_UPDATE_DISABLED},
+ {"Flash in progress", FLASH_IN_PROGRESS},
+ {"Image file size Error", FAIL_FILE_SIZE},
+ {"Input parameter error", FAIL_PARAMETERS},
+ {"Out of memory", FAIL_OUT_MEMORY},
+ {"OK", 0} /* Last entry err_code = 0. */
+};
+
+static int pm8001_set_nvmd(struct pm8001_hba_info *pm8001_ha)
+{
+ struct pm8001_ioctl_payload *payload;
+ DECLARE_COMPLETION_ONSTACK(completion);
+ u8 *ioctlbuffer = NULL;
+ u32 length = 0;
+ u32 ret = 0;
+
+ length = 1024 * 5 + sizeof(*payload) - 1;
+ ioctlbuffer = kzalloc(length, GFP_KERNEL);
+ if (!ioctlbuffer)
+ return -ENOMEM;
+ if ((pm8001_ha->fw_image->size <= 0) ||
+ (pm8001_ha->fw_image->size > 4096)) {
+ ret = FAIL_FILE_SIZE;
+ goto out;
+ }
+ payload = (struct pm8001_ioctl_payload *)ioctlbuffer;
+ memcpy((u8 *)payload->func_specific, (u8 *)pm8001_ha->fw_image->data,
+ pm8001_ha->fw_image->size);
+ payload->length = pm8001_ha->fw_image->size;
+ payload->id = 0;
+ pm8001_ha->nvmd_completion = &completion;
+ ret = PM8001_CHIP_DISP->set_nvmd_req(pm8001_ha, payload);
+ wait_for_completion(&completion);
+out:
+ kfree(ioctlbuffer);
+ return ret;
+}
+
+static int pm8001_update_flash(struct pm8001_hba_info *pm8001_ha)
+{
+ struct pm8001_ioctl_payload *payload;
+ DECLARE_COMPLETION_ONSTACK(completion);
+ u8 *ioctlbuffer = NULL;
+ u32 length = 0;
+ struct fw_control_info *fwControl;
+ u32 loopNumber, loopcount = 0;
+ u32 sizeRead = 0;
+ u32 partitionSize, partitionSizeTmp;
+ u32 ret = 0;
+ u32 partitionNumber = 0;
+ struct pm8001_fw_image_header *image_hdr;
+
+ length = 1024 * 16 + sizeof(*payload) - 1;
+ ioctlbuffer = kzalloc(length, GFP_KERNEL);
+ image_hdr = (struct pm8001_fw_image_header *)pm8001_ha->fw_image->data;
+ if (!ioctlbuffer)
+ return -ENOMEM;
+ if (pm8001_ha->fw_image->size < 28) {
+ ret = FAIL_FILE_SIZE;
+ goto out;
+ }
+
+ while (sizeRead < pm8001_ha->fw_image->size) {
+ partitionSizeTmp =
+ *(u32 *)((u8 *)&image_hdr->image_length + sizeRead);
+ partitionSize = be32_to_cpu(partitionSizeTmp);
+ loopcount = (partitionSize + HEADER_LEN)/IOCTL_BUF_SIZE;
+ if (loopcount % IOCTL_BUF_SIZE)
+ loopcount++;
+ if (loopcount == 0)
+ loopcount++;
+ for (loopNumber = 0; loopNumber < loopcount; loopNumber++) {
+ payload = (struct pm8001_ioctl_payload *)ioctlbuffer;
+ payload->length = 1024*16;
+ payload->id = 0;
+ fwControl =
+ (struct fw_control_info *)payload->func_specific;
+ fwControl->len = IOCTL_BUF_SIZE; /* IN */
+ fwControl->size = partitionSize + HEADER_LEN;/* IN */
+ fwControl->retcode = 0;/* OUT */
+ fwControl->offset = loopNumber * IOCTL_BUF_SIZE;/*OUT */
+
+ /* for the last chunk of data in case file size is not even with
+ 4k, load only the rest*/
+ if (((loopcount-loopNumber) == 1) &&
+ ((partitionSize + HEADER_LEN) % IOCTL_BUF_SIZE)) {
+ fwControl->len =
+ (partitionSize + HEADER_LEN) % IOCTL_BUF_SIZE;
+ memcpy((u8 *)fwControl->buffer,
+ (u8 *)pm8001_ha->fw_image->data + sizeRead,
+ (partitionSize + HEADER_LEN) % IOCTL_BUF_SIZE);
+ sizeRead +=
+ (partitionSize + HEADER_LEN) % IOCTL_BUF_SIZE;
+ } else {
+ memcpy((u8 *)fwControl->buffer,
+ (u8 *)pm8001_ha->fw_image->data + sizeRead,
+ IOCTL_BUF_SIZE);
+ sizeRead += IOCTL_BUF_SIZE;
+ }
+
+ pm8001_ha->nvmd_completion = &completion;
+ ret = PM8001_CHIP_DISP->fw_flash_update_req(pm8001_ha, payload);
+ wait_for_completion(&completion);
+ if (ret || (fwControl->retcode > FLASH_UPDATE_IN_PROGRESS)) {
+ ret = fwControl->retcode;
+ kfree(ioctlbuffer);
+ ioctlbuffer = NULL;
+ break;
+ }
+ }
+ if (ret)
+ break;
+ partitionNumber++;
+}
+out:
+ kfree(ioctlbuffer);
+ return ret;
+}
+static ssize_t pm8001_store_update_fw(struct device *cdev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct Scsi_Host *shost = class_to_shost(cdev);
+ struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+ struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
+ char *cmd_ptr, *filename_ptr;
+ int res, i;
+ int flash_command = FLASH_CMD_NONE;
+ int err = 0;
+ if (!capable(CAP_SYS_ADMIN))
+ return -EACCES;
+
+ cmd_ptr = kzalloc(count*2, GFP_KERNEL);
+
+ if (!cmd_ptr) {
+ err = FAIL_OUT_MEMORY;
+ goto out;
+ }
+
+ filename_ptr = cmd_ptr + count;
+ res = sscanf(buf, "%s %s", cmd_ptr, filename_ptr);
+ if (res != 2) {
+ err = FAIL_PARAMETERS;
+ goto out1;
+ }
+
+ for (i = 0; flash_command_table[i].code != FLASH_CMD_NONE; i++) {
+ if (!memcmp(flash_command_table[i].command,
+ cmd_ptr, strlen(cmd_ptr))) {
+ flash_command = flash_command_table[i].code;
+ break;
+ }
+ }
+ if (flash_command == FLASH_CMD_NONE) {
+ err = FAIL_PARAMETERS;
+ goto out1;
+ }
+
+ if (pm8001_ha->fw_status == FLASH_IN_PROGRESS) {
+ err = FLASH_IN_PROGRESS;
+ goto out1;
+ }
+ err = request_firmware(&pm8001_ha->fw_image,
+ filename_ptr,
+ pm8001_ha->dev);
+
+ if (err) {
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("Failed to load firmware image file %s,"
+ " error %d\n", filename_ptr, err));
+ err = FAIL_OPEN_BIOS_FILE;
+ goto out1;
+ }
+
+ switch (flash_command) {
+ case FLASH_CMD_UPDATE:
+ pm8001_ha->fw_status = FLASH_IN_PROGRESS;
+ err = pm8001_update_flash(pm8001_ha);
+ break;
+ case FLASH_CMD_SET_NVMD:
+ pm8001_ha->fw_status = FLASH_IN_PROGRESS;
+ err = pm8001_set_nvmd(pm8001_ha);
+ break;
+ default:
+ pm8001_ha->fw_status = FAIL_PARAMETERS;
+ err = FAIL_PARAMETERS;
+ break;
+ }
+ release_firmware(pm8001_ha->fw_image);
+out1:
+ kfree(cmd_ptr);
+out:
+ pm8001_ha->fw_status = err;
+
+ if (!err)
+ return count;
+ else
+ return -err;
+}
+
+static ssize_t pm8001_show_update_fw(struct device *cdev,
+ struct device_attribute *attr, char *buf)
+{
+ int i;
+ struct Scsi_Host *shost = class_to_shost(cdev);
+ struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+ struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
+
+ for (i = 0; flash_error_table[i].err_code != 0; i++) {
+ if (flash_error_table[i].err_code == pm8001_ha->fw_status)
+ break;
+ }
+ if (pm8001_ha->fw_status != FLASH_IN_PROGRESS)
+ pm8001_ha->fw_status = FLASH_OK;
+
+ return snprintf(buf, PAGE_SIZE, "status=%x %s\n",
+ flash_error_table[i].err_code,
+ flash_error_table[i].reason);
+}
+
+static DEVICE_ATTR(update_fw, S_IRUGO|S_IWUGO,
+ pm8001_show_update_fw, pm8001_store_update_fw);
+struct device_attribute *pm8001_host_attrs[] = {
+ &dev_attr_interface_rev,
+ &dev_attr_fw_version,
+ &dev_attr_update_fw,
+ &dev_attr_aap_log,
+ &dev_attr_iop_log,
+ &dev_attr_max_out_io,
+ &dev_attr_max_devices,
+ &dev_attr_max_sg_list,
+ &dev_attr_sas_spec_support,
+ &dev_attr_logging_level,
+ &dev_attr_host_sas_address,
+ NULL,
+};
+
diff --git a/drivers/scsi/pm8001/pm8001_ctl.h b/drivers/scsi/pm8001/pm8001_ctl.h
new file mode 100644
index 0000000..22644de
--- /dev/null
+++ b/drivers/scsi/pm8001/pm8001_ctl.h
@@ -0,0 +1,67 @@
+ /*
+ * PMC-Sierra SPC 8001 SAS/SATA based host adapters driver
+ *
+ * Copyright (c) 2008-2009 USI Co., Ltd.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * substantially similar to the "NO WARRANTY" disclaimer below
+ * ("Disclaimer") and any redistribution must be conditioned upon
+ * including a substantially similar Disclaimer requirement for further
+ * binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ *
+ */
+
+#ifndef PM8001_CTL_H_INCLUDED
+#define PM8001_CTL_H_INCLUDED
+
+#define IOCTL_BUF_SIZE 4096
+#define HEADER_LEN 28
+#define SIZE_OFFSET 16
+
+struct pm8001_ioctl_payload {
+ u32 signature;
+ u16 major_function;
+ u16 minor_function;
+ u16 length;
+ u16 status;
+ u16 offset;
+ u16 id;
+ u8 func_specific[1];
+};
+
+#define FLASH_OK 0x000000
+#define FAIL_OPEN_BIOS_FILE 0x000100
+#define FAIL_FILE_SIZE 0x000a00
+#define FAIL_PARAMETERS 0x000b00
+#define FAIL_OUT_MEMORY 0x000c00
+#define FLASH_IN_PROGRESS 0x001000
+
+#endif /* PM8001_CTL_H_INCLUDED */
+
diff --git a/drivers/scsi/pm8001/pm8001_defs.h b/drivers/scsi/pm8001/pm8001_defs.h
new file mode 100644
index 0000000..944afad
--- /dev/null
+++ b/drivers/scsi/pm8001/pm8001_defs.h
@@ -0,0 +1,112 @@
+/*
+ * PMC-Sierra SPC 8001 SAS/SATA based host adapters driver
+ *
+ * Copyright (c) 2008-2009 USI Co., Ltd.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * substantially similar to the "NO WARRANTY" disclaimer below
+ * ("Disclaimer") and any redistribution must be conditioned upon
+ * including a substantially similar Disclaimer requirement for further
+ * binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ *
+ */
+
+#ifndef _PM8001_DEFS_H_
+#define _PM8001_DEFS_H_
+
+enum chip_flavors {
+ chip_8001,
+};
+#define USI_MAX_MEMCNT 9
+#define PM8001_MAX_DMA_SG SG_ALL
+enum phy_speed {
+ PHY_SPEED_15 = 0x01,
+ PHY_SPEED_30 = 0x02,
+ PHY_SPEED_60 = 0x04,
+};
+
+enum data_direction {
+ DATA_DIR_NONE = 0x0, /* NO TRANSFER */
+ DATA_DIR_IN = 0x01, /* INBOUND */
+ DATA_DIR_OUT = 0x02, /* OUTBOUND */
+ DATA_DIR_BYRECIPIENT = 0x04, /* UNSPECIFIED */
+};
+
+enum port_type {
+ PORT_TYPE_SAS = (1L << 1),
+ PORT_TYPE_SATA = (1L << 0),
+};
+
+/* driver compile-time configuration */
+#define PM8001_MAX_CCB 512 /* max ccbs supported */
+#define PM8001_MAX_INB_NUM 1
+#define PM8001_MAX_OUTB_NUM 1
+#define PM8001_CAN_QUEUE 128 /* SCSI Queue depth */
+
+/* unchangeable hardware details */
+#define PM8001_MAX_PHYS 8 /* max. possible phys */
+#define PM8001_MAX_PORTS 8 /* max. possible ports */
+#define PM8001_MAX_DEVICES 1024 /* max supported device */
+
+enum memory_region_num {
+ AAP1 = 0x0, /* application acceleration processor */
+ IOP, /* IO processor */
+ CI, /* consumer index */
+ PI, /* producer index */
+ IB, /* inbound queue */
+ OB, /* outbound queue */
+ NVMD, /* NVM device */
+ DEV_MEM, /* memory for devices */
+ CCB_MEM, /* memory for command control block */
+};
+#define PM8001_EVENT_LOG_SIZE (128 * 1024)
+
+/*error code*/
+enum mpi_err {
+ MPI_IO_STATUS_SUCCESS = 0x0,
+ MPI_IO_STATUS_BUSY = 0x01,
+ MPI_IO_STATUS_FAIL = 0x02,
+};
+
+/**
+ * Phy Control constants
+ */
+enum phy_control_type {
+ PHY_LINK_RESET = 0x01,
+ PHY_HARD_RESET = 0x02,
+ PHY_NOTIFY_ENABLE_SPINUP = 0x10,
+};
+
+enum pm8001_hba_info_flags {
+ PM8001F_INIT_TIME = (1U << 0),
+ PM8001F_RUN_TIME = (1U << 1),
+};
+
+#endif
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
new file mode 100644
index 0000000..a3de306
--- /dev/null
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -0,0 +1,4458 @@
+/*
+ * PMC-Sierra SPC 8001 SAS/SATA based host adapters driver
+ *
+ * Copyright (c) 2008-2009 USI Co., Ltd.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * substantially similar to the "NO WARRANTY" disclaimer below
+ * ("Disclaimer") and any redistribution must be conditioned upon
+ * including a substantially similar Disclaimer requirement for further
+ * binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ *
+ */
+ #include "pm8001_sas.h"
+ #include "pm8001_hwi.h"
+ #include "pm8001_chips.h"
+ #include "pm8001_ctl.h"
+
+/**
+ * read_main_config_table - read the configure table and save it.
+ * @pm8001_ha: our hba card information
+ */
+static void __devinit read_main_config_table(struct pm8001_hba_info *pm8001_ha)
+{
+ void __iomem *address = pm8001_ha->main_cfg_tbl_addr;
+ pm8001_ha->main_cfg_tbl.signature = pm8001_mr32(address, 0x00);
+ pm8001_ha->main_cfg_tbl.interface_rev = pm8001_mr32(address, 0x04);
+ pm8001_ha->main_cfg_tbl.firmware_rev = pm8001_mr32(address, 0x08);
+ pm8001_ha->main_cfg_tbl.max_out_io = pm8001_mr32(address, 0x0C);
+ pm8001_ha->main_cfg_tbl.max_sgl = pm8001_mr32(address, 0x10);
+ pm8001_ha->main_cfg_tbl.ctrl_cap_flag = pm8001_mr32(address, 0x14);
+ pm8001_ha->main_cfg_tbl.gst_offset = pm8001_mr32(address, 0x18);
+ pm8001_ha->main_cfg_tbl.inbound_queue_offset =
+ pm8001_mr32(address, MAIN_IBQ_OFFSET);
+ pm8001_ha->main_cfg_tbl.outbound_queue_offset =
+ pm8001_mr32(address, MAIN_OBQ_OFFSET);
+ pm8001_ha->main_cfg_tbl.hda_mode_flag =
+ pm8001_mr32(address, MAIN_HDA_FLAGS_OFFSET);
+
+ /* read analog Setting offset from the configuration table */
+ pm8001_ha->main_cfg_tbl.anolog_setup_table_offset =
+ pm8001_mr32(address, MAIN_ANALOG_SETUP_OFFSET);
+
+ /* read Error Dump Offset and Length */
+ pm8001_ha->main_cfg_tbl.fatal_err_dump_offset0 =
+ pm8001_mr32(address, MAIN_FATAL_ERROR_RDUMP0_OFFSET);
+ pm8001_ha->main_cfg_tbl.fatal_err_dump_length0 =
+ pm8001_mr32(address, MAIN_FATAL_ERROR_RDUMP0_LENGTH);
+ pm8001_ha->main_cfg_tbl.fatal_err_dump_offset1 =
+ pm8001_mr32(address, MAIN_FATAL_ERROR_RDUMP1_OFFSET);
+ pm8001_ha->main_cfg_tbl.fatal_err_dump_length1 =
+ pm8001_mr32(address, MAIN_FATAL_ERROR_RDUMP1_LENGTH);
+}
+
+/**
+ * read_general_status_table - read the general status table and save it.
+ * @pm8001_ha: our hba card information
+ */
+static void __devinit
+read_general_status_table(struct pm8001_hba_info *pm8001_ha)
+{
+ void __iomem *address = pm8001_ha->general_stat_tbl_addr;
+ pm8001_ha->gs_tbl.gst_len_mpistate = pm8001_mr32(address, 0x00);
+ pm8001_ha->gs_tbl.iq_freeze_state0 = pm8001_mr32(address, 0x04);
+ pm8001_ha->gs_tbl.iq_freeze_state1 = pm8001_mr32(address, 0x08);
+ pm8001_ha->gs_tbl.msgu_tcnt = pm8001_mr32(address, 0x0C);
+ pm8001_ha->gs_tbl.iop_tcnt = pm8001_mr32(address, 0x10);
+ pm8001_ha->gs_tbl.reserved = pm8001_mr32(address, 0x14);
+ pm8001_ha->gs_tbl.phy_state[0] = pm8001_mr32(address, 0x18);
+ pm8001_ha->gs_tbl.phy_state[1] = pm8001_mr32(address, 0x1C);
+ pm8001_ha->gs_tbl.phy_state[2] = pm8001_mr32(address, 0x20);
+ pm8001_ha->gs_tbl.phy_state[3] = pm8001_mr32(address, 0x24);
+ pm8001_ha->gs_tbl.phy_state[4] = pm8001_mr32(address, 0x28);
+ pm8001_ha->gs_tbl.phy_state[5] = pm8001_mr32(address, 0x2C);
+ pm8001_ha->gs_tbl.phy_state[6] = pm8001_mr32(address, 0x30);
+ pm8001_ha->gs_tbl.phy_state[7] = pm8001_mr32(address, 0x34);
+ pm8001_ha->gs_tbl.reserved1 = pm8001_mr32(address, 0x38);
+ pm8001_ha->gs_tbl.reserved2 = pm8001_mr32(address, 0x3C);
+ pm8001_ha->gs_tbl.reserved3 = pm8001_mr32(address, 0x40);
+ pm8001_ha->gs_tbl.recover_err_info[0] = pm8001_mr32(address, 0x44);
+ pm8001_ha->gs_tbl.recover_err_info[1] = pm8001_mr32(address, 0x48);
+ pm8001_ha->gs_tbl.recover_err_info[2] = pm8001_mr32(address, 0x4C);
+ pm8001_ha->gs_tbl.recover_err_info[3] = pm8001_mr32(address, 0x50);
+ pm8001_ha->gs_tbl.recover_err_info[4] = pm8001_mr32(address, 0x54);
+ pm8001_ha->gs_tbl.recover_err_info[5] = pm8001_mr32(address, 0x58);
+ pm8001_ha->gs_tbl.recover_err_info[6] = pm8001_mr32(address, 0x5C);
+ pm8001_ha->gs_tbl.recover_err_info[7] = pm8001_mr32(address, 0x60);
+}
+
+/**
+ * read_inbnd_queue_table - read the inbound queue table and save it.
+ * @pm8001_ha: our hba card information
+ */
+static void __devinit
+read_inbnd_queue_table(struct pm8001_hba_info *pm8001_ha)
+{
+ int inbQ_num = 1;
+ int i;
+ void __iomem *address = pm8001_ha->inbnd_q_tbl_addr;
+ for (i = 0; i < inbQ_num; i++) {
+ u32 offset = i * 0x20;
+ pm8001_ha->inbnd_q_tbl[i].pi_pci_bar =
+ get_pci_bar_index(pm8001_mr32(address, (offset + 0x14)));
+ pm8001_ha->inbnd_q_tbl[i].pi_offset =
+ pm8001_mr32(address, (offset + 0x18));
+ }
+}
+
+/**
+ * read_outbnd_queue_table - read the outbound queue table and save it.
+ * @pm8001_ha: our hba card information
+ */
+static void __devinit
+read_outbnd_queue_table(struct pm8001_hba_info *pm8001_ha)
+{
+ int outbQ_num = 1;
+ int i;
+ void __iomem *address = pm8001_ha->outbnd_q_tbl_addr;
+ for (i = 0; i < outbQ_num; i++) {
+ u32 offset = i * 0x24;
+ pm8001_ha->outbnd_q_tbl[i].ci_pci_bar =
+ get_pci_bar_index(pm8001_mr32(address, (offset + 0x14)));
+ pm8001_ha->outbnd_q_tbl[i].ci_offset =
+ pm8001_mr32(address, (offset + 0x18));
+ }
+}
+
+/**
+ * init_default_table_values - init the default table.
+ * @pm8001_ha: our hba card information
+ */
+static void __devinit
+init_default_table_values(struct pm8001_hba_info *pm8001_ha)
+{
+ int qn = 1;
+ int i;
+ u32 offsetib, offsetob;
+ void __iomem *addressib = pm8001_ha->inbnd_q_tbl_addr;
+ void __iomem *addressob = pm8001_ha->outbnd_q_tbl_addr;
+
+ pm8001_ha->main_cfg_tbl.inbound_q_nppd_hppd = 0;
+ pm8001_ha->main_cfg_tbl.outbound_hw_event_pid0_3 = 0;
+ pm8001_ha->main_cfg_tbl.outbound_hw_event_pid4_7 = 0;
+ pm8001_ha->main_cfg_tbl.outbound_ncq_event_pid0_3 = 0;
+ pm8001_ha->main_cfg_tbl.outbound_ncq_event_pid4_7 = 0;
+ pm8001_ha->main_cfg_tbl.outbound_tgt_ITNexus_event_pid0_3 = 0;
+ pm8001_ha->main_cfg_tbl.outbound_tgt_ITNexus_event_pid4_7 = 0;
+ pm8001_ha->main_cfg_tbl.outbound_tgt_ssp_event_pid0_3 = 0;
+ pm8001_ha->main_cfg_tbl.outbound_tgt_ssp_event_pid4_7 = 0;
+ pm8001_ha->main_cfg_tbl.outbound_tgt_smp_event_pid0_3 = 0;
+ pm8001_ha->main_cfg_tbl.outbound_tgt_smp_event_pid4_7 = 0;
+
+ pm8001_ha->main_cfg_tbl.upper_event_log_addr =
+ pm8001_ha->memoryMap.region[AAP1].phys_addr_hi;
+ pm8001_ha->main_cfg_tbl.lower_event_log_addr =
+ pm8001_ha->memoryMap.region[AAP1].phys_addr_lo;
+ pm8001_ha->main_cfg_tbl.event_log_size = PM8001_EVENT_LOG_SIZE;
+ pm8001_ha->main_cfg_tbl.event_log_option = 0x01;
+ pm8001_ha->main_cfg_tbl.upper_iop_event_log_addr =
+ pm8001_ha->memoryMap.region[IOP].phys_addr_hi;
+ pm8001_ha->main_cfg_tbl.lower_iop_event_log_addr =
+ pm8001_ha->memoryMap.region[IOP].phys_addr_lo;
+ pm8001_ha->main_cfg_tbl.iop_event_log_size = PM8001_EVENT_LOG_SIZE;
+ pm8001_ha->main_cfg_tbl.iop_event_log_option = 0x01;
+ pm8001_ha->main_cfg_tbl.fatal_err_interrupt = 0x01;
+ for (i = 0; i < qn; i++) {
+ pm8001_ha->inbnd_q_tbl[i].element_pri_size_cnt =
+ 0x00000100 | (0x00000040 << 16) | (0x00<<30);
+ pm8001_ha->inbnd_q_tbl[i].upper_base_addr =
+ pm8001_ha->memoryMap.region[IB].phys_addr_hi;
+ pm8001_ha->inbnd_q_tbl[i].lower_base_addr =
+ pm8001_ha->memoryMap.region[IB].phys_addr_lo;
+ pm8001_ha->inbnd_q_tbl[i].base_virt =
+ (u8 *)pm8001_ha->memoryMap.region[IB].virt_ptr;
+ pm8001_ha->inbnd_q_tbl[i].total_length =
+ pm8001_ha->memoryMap.region[IB].total_len;
+ pm8001_ha->inbnd_q_tbl[i].ci_upper_base_addr =
+ pm8001_ha->memoryMap.region[CI].phys_addr_hi;
+ pm8001_ha->inbnd_q_tbl[i].ci_lower_base_addr =
+ pm8001_ha->memoryMap.region[CI].phys_addr_lo;
+ pm8001_ha->inbnd_q_tbl[i].ci_virt =
+ pm8001_ha->memoryMap.region[CI].virt_ptr;
+ offsetib = i * 0x20;
+ pm8001_ha->inbnd_q_tbl[i].pi_pci_bar =
+ get_pci_bar_index(pm8001_mr32(addressib,
+ (offsetib + 0x14)));
+ pm8001_ha->inbnd_q_tbl[i].pi_offset =
+ pm8001_mr32(addressib, (offsetib + 0x18));
+ pm8001_ha->inbnd_q_tbl[i].producer_idx = 0;
+ pm8001_ha->inbnd_q_tbl[i].consumer_index = 0;
+ }
+ for (i = 0; i < qn; i++) {
+ pm8001_ha->outbnd_q_tbl[i].element_size_cnt =
+ 256 | (64 << 16) | (1<<30);
+ pm8001_ha->outbnd_q_tbl[i].upper_base_addr =
+ pm8001_ha->memoryMap.region[OB].phys_addr_hi;
+ pm8001_ha->outbnd_q_tbl[i].lower_base_addr =
+ pm8001_ha->memoryMap.region[OB].phys_addr_lo;
+ pm8001_ha->outbnd_q_tbl[i].base_virt =
+ (u8 *)pm8001_ha->memoryMap.region[OB].virt_ptr;
+ pm8001_ha->outbnd_q_tbl[i].total_length =
+ pm8001_ha->memoryMap.region[OB].total_len;
+ pm8001_ha->outbnd_q_tbl[i].pi_upper_base_addr =
+ pm8001_ha->memoryMap.region[PI].phys_addr_hi;
+ pm8001_ha->outbnd_q_tbl[i].pi_lower_base_addr =
+ pm8001_ha->memoryMap.region[PI].phys_addr_lo;
+ pm8001_ha->outbnd_q_tbl[i].interrup_vec_cnt_delay =
+ 0 | (10 << 16) | (0 << 24);
+ pm8001_ha->outbnd_q_tbl[i].pi_virt =
+ pm8001_ha->memoryMap.region[PI].virt_ptr;
+ offsetob = i * 0x24;
+ pm8001_ha->outbnd_q_tbl[i].ci_pci_bar =
+ get_pci_bar_index(pm8001_mr32(addressob,
+ offsetob + 0x14));
+ pm8001_ha->outbnd_q_tbl[i].ci_offset =
+ pm8001_mr32(addressob, (offsetob + 0x18));
+ pm8001_ha->outbnd_q_tbl[i].consumer_idx = 0;
+ pm8001_ha->outbnd_q_tbl[i].producer_index = 0;
+ }
+}
+
+/**
+ * update_main_config_table - update the main default table to the HBA.
+ * @pm8001_ha: our hba card information
+ */
+static void __devinit
+update_main_config_table(struct pm8001_hba_info *pm8001_ha)
+{
+ void __iomem *address = pm8001_ha->main_cfg_tbl_addr;
+ pm8001_mw32(address, 0x24,
+ pm8001_ha->main_cfg_tbl.inbound_q_nppd_hppd);
+ pm8001_mw32(address, 0x28,
+ pm8001_ha->main_cfg_tbl.outbound_hw_event_pid0_3);
+ pm8001_mw32(address, 0x2C,
+ pm8001_ha->main_cfg_tbl.outbound_hw_event_pid4_7);
+ pm8001_mw32(address, 0x30,
+ pm8001_ha->main_cfg_tbl.outbound_ncq_event_pid0_3);
+ pm8001_mw32(address, 0x34,
+ pm8001_ha->main_cfg_tbl.outbound_ncq_event_pid4_7);
+ pm8001_mw32(address, 0x38,
+ pm8001_ha->main_cfg_tbl.outbound_tgt_ITNexus_event_pid0_3);
+ pm8001_mw32(address, 0x3C,
+ pm8001_ha->main_cfg_tbl.outbound_tgt_ITNexus_event_pid4_7);
+ pm8001_mw32(address, 0x40,
+ pm8001_ha->main_cfg_tbl.outbound_tgt_ssp_event_pid0_3);
+ pm8001_mw32(address, 0x44,
+ pm8001_ha->main_cfg_tbl.outbound_tgt_ssp_event_pid4_7);
+ pm8001_mw32(address, 0x48,
+ pm8001_ha->main_cfg_tbl.outbound_tgt_smp_event_pid0_3);
+ pm8001_mw32(address, 0x4C,
+ pm8001_ha->main_cfg_tbl.outbound_tgt_smp_event_pid4_7);
+ pm8001_mw32(address, 0x50,
+ pm8001_ha->main_cfg_tbl.upper_event_log_addr);
+ pm8001_mw32(address, 0x54,
+ pm8001_ha->main_cfg_tbl.lower_event_log_addr);
+ pm8001_mw32(address, 0x58, pm8001_ha->main_cfg_tbl.event_log_size);
+ pm8001_mw32(address, 0x5C, pm8001_ha->main_cfg_tbl.event_log_option);
+ pm8001_mw32(address, 0x60,
+ pm8001_ha->main_cfg_tbl.upper_iop_event_log_addr);
+ pm8001_mw32(address, 0x64,
+ pm8001_ha->main_cfg_tbl.lower_iop_event_log_addr);
+ pm8001_mw32(address, 0x68, pm8001_ha->main_cfg_tbl.iop_event_log_size);
+ pm8001_mw32(address, 0x6C,
+ pm8001_ha->main_cfg_tbl.iop_event_log_option);
+ pm8001_mw32(address, 0x70,
+ pm8001_ha->main_cfg_tbl.fatal_err_interrupt);
+}
+
+/**
+ * update_inbnd_queue_table - update the inbound queue table to the HBA.
+ * @pm8001_ha: our hba card information
+ */
+static void __devinit
+update_inbnd_queue_table(struct pm8001_hba_info *pm8001_ha, int number)
+{
+ void __iomem *address = pm8001_ha->inbnd_q_tbl_addr;
+ u16 offset = number * 0x20;
+ pm8001_mw32(address, offset + 0x00,
+ pm8001_ha->inbnd_q_tbl[number].element_pri_size_cnt);
+ pm8001_mw32(address, offset + 0x04,
+ pm8001_ha->inbnd_q_tbl[number].upper_base_addr);
+ pm8001_mw32(address, offset + 0x08,
+ pm8001_ha->inbnd_q_tbl[number].lower_base_addr);
+ pm8001_mw32(address, offset + 0x0C,
+ pm8001_ha->inbnd_q_tbl[number].ci_upper_base_addr);
+ pm8001_mw32(address, offset + 0x10,
+ pm8001_ha->inbnd_q_tbl[number].ci_lower_base_addr);
+}
+
+/**
+ * update_outbnd_queue_table - update the outbound queue table to the HBA.
+ * @pm8001_ha: our hba card information
+ */
+static void __devinit
+update_outbnd_queue_table(struct pm8001_hba_info *pm8001_ha, int number)
+{
+ void __iomem *address = pm8001_ha->outbnd_q_tbl_addr;
+ u16 offset = number * 0x24;
+ pm8001_mw32(address, offset + 0x00,
+ pm8001_ha->outbnd_q_tbl[number].element_size_cnt);
+ pm8001_mw32(address, offset + 0x04,
+ pm8001_ha->outbnd_q_tbl[number].upper_base_addr);
+ pm8001_mw32(address, offset + 0x08,
+ pm8001_ha->outbnd_q_tbl[number].lower_base_addr);
+ pm8001_mw32(address, offset + 0x0C,
+ pm8001_ha->outbnd_q_tbl[number].pi_upper_base_addr);
+ pm8001_mw32(address, offset + 0x10,
+ pm8001_ha->outbnd_q_tbl[number].pi_lower_base_addr);
+ pm8001_mw32(address, offset + 0x1C,
+ pm8001_ha->outbnd_q_tbl[number].interrup_vec_cnt_delay);
+}
+
+/**
+ * bar4_shift - function is called to shift BAR base address
+ * @pm8001_ha : our hba card infomation
+ * @shiftValue : shifting value in memory bar.
+ */
+static int bar4_shift(struct pm8001_hba_info *pm8001_ha, u32 shiftValue)
+{
+ u32 regVal;
+ u32 max_wait_count;
+
+ /* program the inbound AXI translation Lower Address */
+ pm8001_cw32(pm8001_ha, 1, SPC_IBW_AXI_TRANSLATION_LOW, shiftValue);
+
+ /* confirm the setting is written */
+ max_wait_count = 1 * 1000 * 1000; /* 1 sec */
+ do {
+ udelay(1);
+ regVal = pm8001_cr32(pm8001_ha, 1, SPC_IBW_AXI_TRANSLATION_LOW);
+ } while ((regVal != shiftValue) && (--max_wait_count));
+
+ if (!max_wait_count) {
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("TIMEOUT:SPC_IBW_AXI_TRANSLATION_LOW"
+ " = 0x%x\n", regVal));
+ return -1;
+ }
+ return 0;
+}
+
+/**
+ * mpi_set_phys_g3_with_ssc
+ * @pm8001_ha: our hba card information
+ * @SSCbit: set SSCbit to 0 to disable all phys ssc; 1 to enable all phys ssc.
+ */
+static void __devinit
+mpi_set_phys_g3_with_ssc(struct pm8001_hba_info *pm8001_ha, u32 SSCbit)
+{
+ u32 offset;
+ u32 value;
+ u32 i, j;
+ u32 bit_cnt;
+
+#define SAS2_SETTINGS_LOCAL_PHY_0_3_SHIFT_ADDR 0x00030000
+#define SAS2_SETTINGS_LOCAL_PHY_4_7_SHIFT_ADDR 0x00040000
+#define SAS2_SETTINGS_LOCAL_PHY_0_3_OFFSET 0x1074
+#define SAS2_SETTINGS_LOCAL_PHY_4_7_OFFSET 0x1074
+#define PHY_G3_WITHOUT_SSC_BIT_SHIFT 12
+#define PHY_G3_WITH_SSC_BIT_SHIFT 13
+#define SNW3_PHY_CAPABILITIES_PARITY 31
+
+ /*
+ * Using shifted destination address 0x3_0000:0x1074 + 0x4000*N (N=0:3)
+ * Using shifted destination address 0x4_0000:0x1074 + 0x4000*(N-4) (N=4:7)
+ */
+ if (-1 == bar4_shift(pm8001_ha, SAS2_SETTINGS_LOCAL_PHY_0_3_SHIFT_ADDR))
+ return;
+ /* set SSC bit of PHY 0 - 3 */
+ for (i = 0; i < 4; i++) {
+ offset = SAS2_SETTINGS_LOCAL_PHY_0_3_OFFSET + 0x4000 * i;
+ value = pm8001_cr32(pm8001_ha, 2, offset);
+ if (SSCbit) {
+ value |= 0x00000001 << PHY_G3_WITH_SSC_BIT_SHIFT;
+ value &= ~(0x00000001 << PHY_G3_WITHOUT_SSC_BIT_SHIFT);
+ } else {
+ value |= 0x00000001 << PHY_G3_WITHOUT_SSC_BIT_SHIFT;
+ value &= ~(0x00000001 << PHY_G3_WITH_SSC_BIT_SHIFT);
+ }
+ bit_cnt = 0;
+ for (j = 0; j < 31; j++)
+ if ((value >> j) & 0x00000001)
+ bit_cnt++;
+ if (bit_cnt % 2)
+ value &= ~(0x00000001 << SNW3_PHY_CAPABILITIES_PARITY);
+ else
+ value |= 0x00000001 << SNW3_PHY_CAPABILITIES_PARITY;
+
+ pm8001_cw32(pm8001_ha, 2, offset, value);
+ }
+
+ /* shift membase 3 for SAS2_SETTINGS_LOCAL_PHY 4 - 7 */
+ if (-1 == bar4_shift(pm8001_ha, SAS2_SETTINGS_LOCAL_PHY_4_7_SHIFT_ADDR))
+ return;
+
+ /* set SSC bit of PHY 4 - 7 */
+ for (i = 4; i < 8; i++) {
+ offset = SAS2_SETTINGS_LOCAL_PHY_4_7_OFFSET + 0x4000 * (i-4);
+ value = pm8001_cr32(pm8001_ha, 2, offset);
+ if (SSCbit) {
+ value |= 0x00000001 << PHY_G3_WITH_SSC_BIT_SHIFT;
+ value &= ~(0x00000001 << PHY_G3_WITHOUT_SSC_BIT_SHIFT);
+ } else {
+ value |= 0x00000001 << PHY_G3_WITHOUT_SSC_BIT_SHIFT;
+ value &= ~(0x00000001 << PHY_G3_WITH_SSC_BIT_SHIFT);
+ }
+ bit_cnt = 0;
+ for (j = 0; j < 31; j++)
+ if ((value >> j) & 0x00000001)
+ bit_cnt++;
+ if (bit_cnt % 2)
+ value &= ~(0x00000001 << SNW3_PHY_CAPABILITIES_PARITY);
+ else
+ value |= 0x00000001 << SNW3_PHY_CAPABILITIES_PARITY;
+
+ pm8001_cw32(pm8001_ha, 2, offset, value);
+ }
+
+ /*set the shifted destination address to 0x0 to avoid error operation */
+ bar4_shift(pm8001_ha, 0x0);
+ return;
+}
+
+/**
+ * mpi_set_open_retry_interval_reg
+ * @pm8001_ha: our hba card information
+ * @interval - interval time for each OPEN_REJECT (RETRY). The units are in 1us.
+ */
+static void __devinit
+mpi_set_open_retry_interval_reg(struct pm8001_hba_info *pm8001_ha,
+ u32 interval)
+{
+ u32 offset;
+ u32 value;
+ u32 i;
+
+#define OPEN_RETRY_INTERVAL_PHY_0_3_SHIFT_ADDR 0x00030000
+#define OPEN_RETRY_INTERVAL_PHY_4_7_SHIFT_ADDR 0x00040000
+#define OPEN_RETRY_INTERVAL_PHY_0_3_OFFSET 0x30B4
+#define OPEN_RETRY_INTERVAL_PHY_4_7_OFFSET 0x30B4
+#define OPEN_RETRY_INTERVAL_REG_MASK 0x0000FFFF
+
+ value = interval & OPEN_RETRY_INTERVAL_REG_MASK;
+ /* shift bar and set the OPEN_REJECT(RETRY) interval time of PHY 0 -3.*/
+ if (-1 == bar4_shift(pm8001_ha,
+ OPEN_RETRY_INTERVAL_PHY_0_3_SHIFT_ADDR))
+ return;
+ for (i = 0; i < 4; i++) {
+ offset = OPEN_RETRY_INTERVAL_PHY_0_3_OFFSET + 0x4000 * i;
+ pm8001_cw32(pm8001_ha, 2, offset, value);
+ }
+
+ if (-1 == bar4_shift(pm8001_ha,
+ OPEN_RETRY_INTERVAL_PHY_4_7_SHIFT_ADDR))
+ return;
+ for (i = 4; i < 8; i++) {
+ offset = OPEN_RETRY_INTERVAL_PHY_4_7_OFFSET + 0x4000 * (i-4);
+ pm8001_cw32(pm8001_ha, 2, offset, value);
+ }
+ /*set the shifted destination address to 0x0 to avoid error operation */
+ bar4_shift(pm8001_ha, 0x0);
+ return;
+}
+
+/**
+ * mpi_init_check - check firmware initialization status.
+ * @pm8001_ha: our hba card information
+ */
+static int mpi_init_check(struct pm8001_hba_info *pm8001_ha)
+{
+ u32 max_wait_count;
+ u32 value;
+ u32 gst_len_mpistate;
+ /* Write bit0=1 to Inbound DoorBell Register to tell the SPC FW the
+ table is updated */
+ pm8001_cw32(pm8001_ha, 0, MSGU_IBDB_SET, SPC_MSGU_CFG_TABLE_UPDATE);
+ /* wait until Inbound DoorBell Clear Register toggled */
+ max_wait_count = 1 * 1000 * 1000;/* 1 sec */
+ do {
+ udelay(1);
+ value = pm8001_cr32(pm8001_ha, 0, MSGU_IBDB_SET);
+ value &= SPC_MSGU_CFG_TABLE_UPDATE;
+ } while ((value != 0) && (--max_wait_count));
+
+ if (!max_wait_count)
+ return -1;
+ /* check the MPI-State for initialization */
+ gst_len_mpistate =
+ pm8001_mr32(pm8001_ha->general_stat_tbl_addr,
+ GST_GSTLEN_MPIS_OFFSET);
+ if (GST_MPI_STATE_INIT != (gst_len_mpistate & GST_MPI_STATE_MASK))
+ return -1;
+ /* check MPI Initialization error */
+ gst_len_mpistate = gst_len_mpistate >> 16;
+ if (0x0000 != gst_len_mpistate)
+ return -1;
+ return 0;
+}
+
+/**
+ * check_fw_ready - The LLDD check if the FW is ready, if not, return error.
+ * @pm8001_ha: our hba card information
+ */
+static int check_fw_ready(struct pm8001_hba_info *pm8001_ha)
+{
+ u32 value, value1;
+ u32 max_wait_count;
+ /* check error state */
+ value = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1);
+ value1 = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_2);
+ /* check AAP error */
+ if (SCRATCH_PAD1_ERR == (value & SCRATCH_PAD_STATE_MASK)) {
+ /* error state */
+ value = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_0);
+ return -1;
+ }
+
+ /* check IOP error */
+ if (SCRATCH_PAD2_ERR == (value1 & SCRATCH_PAD_STATE_MASK)) {
+ /* error state */
+ value1 = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_3);
+ return -1;
+ }
+
+ /* bit 4-31 of scratch pad1 should be zeros if it is not
+ in error state*/
+ if (value & SCRATCH_PAD1_STATE_MASK) {
+ /* error case */
+ pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_0);
+ return -1;
+ }
+
+ /* bit 2, 4-31 of scratch pad2 should be zeros if it is not
+ in error state */
+ if (value1 & SCRATCH_PAD2_STATE_MASK) {
+ /* error case */
+ return -1;
+ }
+
+ max_wait_count = 1 * 1000 * 1000;/* 1 sec timeout */
+
+ /* wait until scratch pad 1 and 2 registers in ready state */
+ do {
+ udelay(1);
+ value = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1)
+ & SCRATCH_PAD1_RDY;
+ value1 = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_2)
+ & SCRATCH_PAD2_RDY;
+ if ((--max_wait_count) == 0)
+ return -1;
+ } while ((value != SCRATCH_PAD1_RDY) || (value1 != SCRATCH_PAD2_RDY));
+ return 0;
+}
+
+static void init_pci_device_addresses(struct pm8001_hba_info *pm8001_ha)
+{
+ void __iomem *base_addr;
+ u32 value;
+ u32 offset;
+ u32 pcibar;
+ u32 pcilogic;
+
+ value = pm8001_cr32(pm8001_ha, 0, 0x44);
+ offset = value & 0x03FFFFFF;
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("Scratchpad 0 Offset: %x \n", offset));
+ pcilogic = (value & 0xFC000000) >> 26;
+ pcibar = get_pci_bar_index(pcilogic);
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("Scratchpad 0 PCI BAR: %d \n", pcibar));
+ pm8001_ha->main_cfg_tbl_addr = base_addr =
+ pm8001_ha->io_mem[pcibar].memvirtaddr + offset;
+ pm8001_ha->general_stat_tbl_addr =
+ base_addr + pm8001_cr32(pm8001_ha, pcibar, offset + 0x18);
+ pm8001_ha->inbnd_q_tbl_addr =
+ base_addr + pm8001_cr32(pm8001_ha, pcibar, offset + 0x1C);
+ pm8001_ha->outbnd_q_tbl_addr =
+ base_addr + pm8001_cr32(pm8001_ha, pcibar, offset + 0x20);
+}
+
+/**
+ * pm8001_chip_init - the main init function that initialize whole PM8001 chip.
+ * @pm8001_ha: our hba card information
+ */
+static int __devinit pm8001_chip_init(struct pm8001_hba_info *pm8001_ha)
+{
+ /* check the firmware status */
+ if (-1 == check_fw_ready(pm8001_ha)) {
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("Firmware is not ready!\n"));
+ return -EBUSY;
+ }
+
+ /* Initialize pci space address eg: mpi offset */
+ init_pci_device_addresses(pm8001_ha);
+ init_default_table_values(pm8001_ha);
+ read_main_config_table(pm8001_ha);
+ read_general_status_table(pm8001_ha);
+ read_inbnd_queue_table(pm8001_ha);
+ read_outbnd_queue_table(pm8001_ha);
+ /* update main config table ,inbound table and outbound table */
+ update_main_config_table(pm8001_ha);
+ update_inbnd_queue_table(pm8001_ha, 0);
+ update_outbnd_queue_table(pm8001_ha, 0);
+ mpi_set_phys_g3_with_ssc(pm8001_ha, 0);
+ mpi_set_open_retry_interval_reg(pm8001_ha, 7);
+ /* notify firmware update finished and check initialization status */
+ if (0 == mpi_init_check(pm8001_ha)) {
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("MPI initialize successful!\n"));
+ } else
+ return -EBUSY;
+ /*This register is a 16-bit timer with a resolution of 1us. This is the
+ timer used for interrupt delay/coalescing in the PCIe Application Layer.
+ Zero is not a valid value. A value of 1 in the register will cause the
+ interrupts to be normal. A value greater than 1 will cause coalescing
+ delays.*/
+ pm8001_cw32(pm8001_ha, 1, 0x0033c0, 0x1);
+ pm8001_cw32(pm8001_ha, 1, 0x0033c4, 0x0);
+ return 0;
+}
+
+static int mpi_uninit_check(struct pm8001_hba_info *pm8001_ha)
+{
+ u32 max_wait_count;
+ u32 value;
+ u32 gst_len_mpistate;
+ init_pci_device_addresses(pm8001_ha);
+ /* Write bit1=1 to Inbound DoorBell Register to tell the SPC FW the
+ table is stop */
+ pm8001_cw32(pm8001_ha, 0, MSGU_IBDB_SET, SPC_MSGU_CFG_TABLE_RESET);
+
+ /* wait until Inbound DoorBell Clear Register toggled */
+ max_wait_count = 1 * 1000 * 1000;/* 1 sec */
+ do {
+ udelay(1);
+ value = pm8001_cr32(pm8001_ha, 0, MSGU_IBDB_SET);
+ value &= SPC_MSGU_CFG_TABLE_RESET;
+ } while ((value != 0) && (--max_wait_count));
+
+ if (!max_wait_count) {
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("TIMEOUT:IBDB value/=0x%x\n", value));
+ return -1;
+ }
+
+ /* check the MPI-State for termination in progress */
+ /* wait until Inbound DoorBell Clear Register toggled */
+ max_wait_count = 1 * 1000 * 1000; /* 1 sec */
+ do {
+ udelay(1);
+ gst_len_mpistate =
+ pm8001_mr32(pm8001_ha->general_stat_tbl_addr,
+ GST_GSTLEN_MPIS_OFFSET);
+ if (GST_MPI_STATE_UNINIT ==
+ (gst_len_mpistate & GST_MPI_STATE_MASK))
+ break;
+ } while (--max_wait_count);
+ if (!max_wait_count) {
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk(" TIME OUT MPI State = 0x%x\n",
+ gst_len_mpistate & GST_MPI_STATE_MASK));
+ return -1;
+ }
+ return 0;
+}
+
+/**
+ * soft_reset_ready_check - Function to check FW is ready for soft reset.
+ * @pm8001_ha: our hba card information
+ */
+static u32 soft_reset_ready_check(struct pm8001_hba_info *pm8001_ha)
+{
+ u32 regVal, regVal1, regVal2;
+ if (mpi_uninit_check(pm8001_ha) != 0) {
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("MPI state is not ready\n"));
+ return -1;
+ }
+ /* read the scratch pad 2 register bit 2 */
+ regVal = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_2)
+ & SCRATCH_PAD2_FWRDY_RST;
+ if (regVal == SCRATCH_PAD2_FWRDY_RST) {
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("Firmware is ready for reset .\n"));
+ } else {
+ /* Trigger NMI twice via RB6 */
+ if (-1 == bar4_shift(pm8001_ha, RB6_ACCESS_REG)) {
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("Shift Bar4 to 0x%x failed\n",
+ RB6_ACCESS_REG));
+ return -1;
+ }
+ pm8001_cw32(pm8001_ha, 2, SPC_RB6_OFFSET,
+ RB6_MAGIC_NUMBER_RST);
+ pm8001_cw32(pm8001_ha, 2, SPC_RB6_OFFSET, RB6_MAGIC_NUMBER_RST);
+ /* wait for 100 ms */
+ mdelay(100);
+ regVal = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_2) &
+ SCRATCH_PAD2_FWRDY_RST;
+ if (regVal != SCRATCH_PAD2_FWRDY_RST) {
+ regVal1 = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1);
+ regVal2 = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_2);
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("TIMEOUT:MSGU_SCRATCH_PAD1"
+ "=0x%x, MSGU_SCRATCH_PAD2=0x%x\n",
+ regVal1, regVal2));
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("SCRATCH_PAD0 value = 0x%x\n",
+ pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_0)));
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("SCRATCH_PAD3 value = 0x%x\n",
+ pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_3)));
+ return -1;
+ }
+ }
+ return 0;
+}
+
+/**
+ * pm8001_chip_soft_rst - soft reset the PM8001 chip, so that the clear all
+ * the FW register status to the originated status.
+ * @pm8001_ha: our hba card information
+ * @signature: signature in host scratch pad0 register.
+ */
+static int
+pm8001_chip_soft_rst(struct pm8001_hba_info *pm8001_ha, u32 signature)
+{
+ u32 regVal, toggleVal;
+ u32 max_wait_count;
+ u32 regVal1, regVal2, regVal3;
+
+ /* step1: Check FW is ready for soft reset */
+ if (soft_reset_ready_check(pm8001_ha) != 0) {
+ PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("FW is not ready\n"));
+ return -1;
+ }
+
+ /* step 2: clear NMI status register on AAP1 and IOP, write the same
+ value to clear */
+ /* map 0x60000 to BAR4(0x20), BAR2(win) */
+ if (-1 == bar4_shift(pm8001_ha, MBIC_AAP1_ADDR_BASE)) {
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("Shift Bar4 to 0x%x failed\n",
+ MBIC_AAP1_ADDR_BASE));
+ return -1;
+ }
+ regVal = pm8001_cr32(pm8001_ha, 2, MBIC_NMI_ENABLE_VPE0_IOP);
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("MBIC - NMI Enable VPE0 (IOP)= 0x%x\n", regVal));
+ pm8001_cw32(pm8001_ha, 2, MBIC_NMI_ENABLE_VPE0_IOP, 0x0);
+ /* map 0x70000 to BAR4(0x20), BAR2(win) */
+ if (-1 == bar4_shift(pm8001_ha, MBIC_IOP_ADDR_BASE)) {
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("Shift Bar4 to 0x%x failed\n",
+ MBIC_IOP_ADDR_BASE));
+ return -1;
+ }
+ regVal = pm8001_cr32(pm8001_ha, 2, MBIC_NMI_ENABLE_VPE0_AAP1);
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("MBIC - NMI Enable VPE0 (AAP1)= 0x%x\n", regVal));
+ pm8001_cw32(pm8001_ha, 2, MBIC_NMI_ENABLE_VPE0_AAP1, 0x0);
+
+ regVal = pm8001_cr32(pm8001_ha, 1, PCIE_EVENT_INTERRUPT_ENABLE);
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("PCIE -Event Interrupt Enable = 0x%x\n", regVal));
+ pm8001_cw32(pm8001_ha, 1, PCIE_EVENT_INTERRUPT_ENABLE, 0x0);
+
+ regVal = pm8001_cr32(pm8001_ha, 1, PCIE_EVENT_INTERRUPT);
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("PCIE - Event Interrupt = 0x%x\n", regVal));
+ pm8001_cw32(pm8001_ha, 1, PCIE_EVENT_INTERRUPT, regVal);
+
+ regVal = pm8001_cr32(pm8001_ha, 1, PCIE_ERROR_INTERRUPT_ENABLE);
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("PCIE -Error Interrupt Enable = 0x%x\n", regVal));
+ pm8001_cw32(pm8001_ha, 1, PCIE_ERROR_INTERRUPT_ENABLE, 0x0);
+
+ regVal = pm8001_cr32(pm8001_ha, 1, PCIE_ERROR_INTERRUPT);
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("PCIE - Error Interrupt = 0x%x\n", regVal));
+ pm8001_cw32(pm8001_ha, 1, PCIE_ERROR_INTERRUPT, regVal);
+
+ /* read the scratch pad 1 register bit 2 */
+ regVal = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1)
+ & SCRATCH_PAD1_RST;
+ toggleVal = regVal ^ SCRATCH_PAD1_RST;
+
+ /* set signature in host scratch pad0 register to tell SPC that the
+ host performs the soft reset */
+ pm8001_cw32(pm8001_ha, 0, MSGU_HOST_SCRATCH_PAD_0, signature);
+
+ /* read required registers for confirmming */
+ /* map 0x0700000 to BAR4(0x20), BAR2(win) */
+ if (-1 == bar4_shift(pm8001_ha, GSM_ADDR_BASE)) {
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("Shift Bar4 to 0x%x failed\n",
+ GSM_ADDR_BASE));
+ return -1;
+ }
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("GSM 0x0(0x00007b88)-GSM Configuration and"
+ " Reset = 0x%x\n",
+ pm8001_cr32(pm8001_ha, 2, GSM_CONFIG_RESET)));
+
+ /* step 3: host read GSM Configuration and Reset register */
+ regVal = pm8001_cr32(pm8001_ha, 2, GSM_CONFIG_RESET);
+ /* Put those bits to low */
+ /* GSM XCBI offset = 0x70 0000
+ 0x00 Bit 13 COM_SLV_SW_RSTB 1
+ 0x00 Bit 12 QSSP_SW_RSTB 1
+ 0x00 Bit 11 RAAE_SW_RSTB 1
+ 0x00 Bit 9 RB_1_SW_RSTB 1
+ 0x00 Bit 8 SM_SW_RSTB 1
+ */
+ regVal &= ~(0x00003b00);
+ /* host write GSM Configuration and Reset register */
+ pm8001_cw32(pm8001_ha, 2, GSM_CONFIG_RESET, regVal);
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("GSM 0x0 (0x00007b88 ==> 0x00004088) - GSM "
+ "Configuration and Reset is set to = 0x%x\n",
+ pm8001_cr32(pm8001_ha, 2, GSM_CONFIG_RESET)));
+
+ /* step 4: */
+ /* disable GSM - Read Address Parity Check */
+ regVal1 = pm8001_cr32(pm8001_ha, 2, GSM_READ_ADDR_PARITY_CHECK);
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("GSM 0x700038 - Read Address Parity Check "
+ "Enable = 0x%x\n", regVal1));
+ pm8001_cw32(pm8001_ha, 2, GSM_READ_ADDR_PARITY_CHECK, 0x0);
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("GSM 0x700038 - Read Address Parity Check Enable"
+ "is set to = 0x%x\n",
+ pm8001_cr32(pm8001_ha, 2, GSM_READ_ADDR_PARITY_CHECK)));
+
+ /* disable GSM - Write Address Parity Check */
+ regVal2 = pm8001_cr32(pm8001_ha, 2, GSM_WRITE_ADDR_PARITY_CHECK);
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("GSM 0x700040 - Write Address Parity Check"
+ " Enable = 0x%x\n", regVal2));
+ pm8001_cw32(pm8001_ha, 2, GSM_WRITE_ADDR_PARITY_CHECK, 0x0);
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("GSM 0x700040 - Write Address Parity Check "
+ "Enable is set to = 0x%x\n",
+ pm8001_cr32(pm8001_ha, 2, GSM_WRITE_ADDR_PARITY_CHECK)));
+
+ /* disable GSM - Write Data Parity Check */
+ regVal3 = pm8001_cr32(pm8001_ha, 2, GSM_WRITE_DATA_PARITY_CHECK);
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("GSM 0x300048 - Write Data Parity Check"
+ " Enable = 0x%x\n", regVal3));
+ pm8001_cw32(pm8001_ha, 2, GSM_WRITE_DATA_PARITY_CHECK, 0x0);
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("GSM 0x300048 - Write Data Parity Check Enable"
+ "is set to = 0x%x\n",
+ pm8001_cr32(pm8001_ha, 2, GSM_WRITE_DATA_PARITY_CHECK)));
+
+ /* step 5: delay 10 usec */
+ udelay(10);
+ /* step 5-b: set GPIO-0 output control to tristate anyway */
+ if (-1 == bar4_shift(pm8001_ha, GPIO_ADDR_BASE)) {
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("Shift Bar4 to 0x%x failed\n",
+ GPIO_ADDR_BASE));
+ return -1;
+ }
+ regVal = pm8001_cr32(pm8001_ha, 2, GPIO_GPIO_0_0UTPUT_CTL_OFFSET);
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("GPIO Output Control Register:"
+ " = 0x%x\n", regVal));
+ /* set GPIO-0 output control to tri-state */
+ regVal &= 0xFFFFFFFC;
+ pm8001_cw32(pm8001_ha, 2, GPIO_GPIO_0_0UTPUT_CTL_OFFSET, regVal);
+
+ /* Step 6: Reset the IOP and AAP1 */
+ /* map 0x00000 to BAR4(0x20), BAR2(win) */
+ if (-1 == bar4_shift(pm8001_ha, SPC_TOP_LEVEL_ADDR_BASE)) {
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("SPC Shift Bar4 to 0x%x failed\n",
+ SPC_TOP_LEVEL_ADDR_BASE));
+ return -1;
+ }
+ regVal = pm8001_cr32(pm8001_ha, 2, SPC_REG_RESET);
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("Top Register before resetting IOP/AAP1"
+ ":= 0x%x\n", regVal));
+ regVal &= ~(SPC_REG_RESET_PCS_IOP_SS | SPC_REG_RESET_PCS_AAP1_SS);
+ pm8001_cw32(pm8001_ha, 2, SPC_REG_RESET, regVal);
+
+ /* step 7: Reset the BDMA/OSSP */
+ regVal = pm8001_cr32(pm8001_ha, 2, SPC_REG_RESET);
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("Top Register before resetting BDMA/OSSP"
+ ": = 0x%x\n", regVal));
+ regVal &= ~(SPC_REG_RESET_BDMA_CORE | SPC_REG_RESET_OSSP);
+ pm8001_cw32(pm8001_ha, 2, SPC_REG_RESET, regVal);
+
+ /* step 8: delay 10 usec */
+ udelay(10);
+
+ /* step 9: bring the BDMA and OSSP out of reset */
+ regVal = pm8001_cr32(pm8001_ha, 2, SPC_REG_RESET);
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("Top Register before bringing up BDMA/OSSP"
+ ":= 0x%x\n", regVal));
+ regVal |= (SPC_REG_RESET_BDMA_CORE | SPC_REG_RESET_OSSP);
+ pm8001_cw32(pm8001_ha, 2, SPC_REG_RESET, regVal);
+
+ /* step 10: delay 10 usec */
+ udelay(10);
+
+ /* step 11: reads and sets the GSM Configuration and Reset Register */
+ /* map 0x0700000 to BAR4(0x20), BAR2(win) */
+ if (-1 == bar4_shift(pm8001_ha, GSM_ADDR_BASE)) {
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("SPC Shift Bar4 to 0x%x failed\n",
+ GSM_ADDR_BASE));
+ return -1;
+ }
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("GSM 0x0 (0x00007b88)-GSM Configuration and "
+ "Reset = 0x%x\n", pm8001_cr32(pm8001_ha, 2, GSM_CONFIG_RESET)));
+ regVal = pm8001_cr32(pm8001_ha, 2, GSM_CONFIG_RESET);
+ /* Put those bits to high */
+ /* GSM XCBI offset = 0x70 0000
+ 0x00 Bit 13 COM_SLV_SW_RSTB 1
+ 0x00 Bit 12 QSSP_SW_RSTB 1
+ 0x00 Bit 11 RAAE_SW_RSTB 1
+ 0x00 Bit 9 RB_1_SW_RSTB 1
+ 0x00 Bit 8 SM_SW_RSTB 1
+ */
+ regVal |= (GSM_CONFIG_RESET_VALUE);
+ pm8001_cw32(pm8001_ha, 2, GSM_CONFIG_RESET, regVal);
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("GSM (0x00004088 ==> 0x00007b88) - GSM"
+ " Configuration and Reset is set to = 0x%x\n",
+ pm8001_cr32(pm8001_ha, 2, GSM_CONFIG_RESET)));
+
+ /* step 12: Restore GSM - Read Address Parity Check */
+ regVal = pm8001_cr32(pm8001_ha, 2, GSM_READ_ADDR_PARITY_CHECK);
+ /* just for debugging */
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("GSM 0x700038 - Read Address Parity Check Enable"
+ " = 0x%x\n", regVal));
+ pm8001_cw32(pm8001_ha, 2, GSM_READ_ADDR_PARITY_CHECK, regVal1);
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("GSM 0x700038 - Read Address Parity"
+ " Check Enable is set to = 0x%x\n",
+ pm8001_cr32(pm8001_ha, 2, GSM_READ_ADDR_PARITY_CHECK)));
+ /* Restore GSM - Write Address Parity Check */
+ regVal = pm8001_cr32(pm8001_ha, 2, GSM_WRITE_ADDR_PARITY_CHECK);
+ pm8001_cw32(pm8001_ha, 2, GSM_WRITE_ADDR_PARITY_CHECK, regVal2);
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("GSM 0x700040 - Write Address Parity Check"
+ " Enable is set to = 0x%x\n",
+ pm8001_cr32(pm8001_ha, 2, GSM_WRITE_ADDR_PARITY_CHECK)));
+ /* Restore GSM - Write Data Parity Check */
+ regVal = pm8001_cr32(pm8001_ha, 2, GSM_WRITE_DATA_PARITY_CHECK);
+ pm8001_cw32(pm8001_ha, 2, GSM_WRITE_DATA_PARITY_CHECK, regVal3);
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("GSM 0x700048 - Write Data Parity Check Enable"
+ "is set to = 0x%x\n",
+ pm8001_cr32(pm8001_ha, 2, GSM_WRITE_DATA_PARITY_CHECK)));
+
+ /* step 13: bring the IOP and AAP1 out of reset */
+ /* map 0x00000 to BAR4(0x20), BAR2(win) */
+ if (-1 == bar4_shift(pm8001_ha, SPC_TOP_LEVEL_ADDR_BASE)) {
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("Shift Bar4 to 0x%x failed\n",
+ SPC_TOP_LEVEL_ADDR_BASE));
+ return -1;
+ }
+ regVal = pm8001_cr32(pm8001_ha, 2, SPC_REG_RESET);
+ regVal |= (SPC_REG_RESET_PCS_IOP_SS | SPC_REG_RESET_PCS_AAP1_SS);
+ pm8001_cw32(pm8001_ha, 2, SPC_REG_RESET, regVal);
+
+ /* step 14: delay 10 usec - Normal Mode */
+ udelay(10);
+ /* check Soft Reset Normal mode or Soft Reset HDA mode */
+ if (signature == SPC_SOFT_RESET_SIGNATURE) {
+ /* step 15 (Normal Mode): wait until scratch pad1 register
+ bit 2 toggled */
+ max_wait_count = 2 * 1000 * 1000;/* 2 sec */
+ do {
+ udelay(1);
+ regVal = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1) &
+ SCRATCH_PAD1_RST;
+ } while ((regVal != toggleVal) && (--max_wait_count));
+
+ if (!max_wait_count) {
+ regVal = pm8001_cr32(pm8001_ha, 0,
+ MSGU_SCRATCH_PAD_1);
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("TIMEOUT : ToggleVal 0x%x,"
+ "MSGU_SCRATCH_PAD1 = 0x%x\n",
+ toggleVal, regVal));
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("SCRATCH_PAD0 value = 0x%x\n",
+ pm8001_cr32(pm8001_ha, 0,
+ MSGU_SCRATCH_PAD_0)));
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("SCRATCH_PAD2 value = 0x%x\n",
+ pm8001_cr32(pm8001_ha, 0,
+ MSGU_SCRATCH_PAD_2)));
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("SCRATCH_PAD3 value = 0x%x\n",
+ pm8001_cr32(pm8001_ha, 0,
+ MSGU_SCRATCH_PAD_3)));
+ return -1;
+ }
+
+ /* step 16 (Normal) - Clear ODMR and ODCR */
+ pm8001_cw32(pm8001_ha, 0, MSGU_ODCR, ODCR_CLEAR_ALL);
+ pm8001_cw32(pm8001_ha, 0, MSGU_ODMR, ODMR_CLEAR_ALL);
+
+ /* step 17 (Normal Mode): wait for the FW and IOP to get
+ ready - 1 sec timeout */
+ /* Wait for the SPC Configuration Table to be ready */
+ if (check_fw_ready(pm8001_ha) == -1) {
+ regVal = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1);
+ /* return error if MPI Configuration Table not ready */
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("FW not ready SCRATCH_PAD1"
+ " = 0x%x\n", regVal));
+ regVal = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_2);
+ /* return error if MPI Configuration Table not ready */
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("FW not ready SCRATCH_PAD2"
+ " = 0x%x\n", regVal));
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("SCRATCH_PAD0 value = 0x%x\n",
+ pm8001_cr32(pm8001_ha, 0,
+ MSGU_SCRATCH_PAD_0)));
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("SCRATCH_PAD3 value = 0x%x\n",
+ pm8001_cr32(pm8001_ha, 0,
+ MSGU_SCRATCH_PAD_3)));
+ return -1;
+ }
+ }
+
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("SPC soft reset Complete\n"));
+ return 0;
+}
+
+static void pm8001_hw_chip_rst(struct pm8001_hba_info *pm8001_ha)
+{
+ u32 i;
+ u32 regVal;
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("chip reset start\n"));
+
+ /* do SPC chip reset. */
+ regVal = pm8001_cr32(pm8001_ha, 1, SPC_REG_RESET);
+ regVal &= ~(SPC_REG_RESET_DEVICE);
+ pm8001_cw32(pm8001_ha, 1, SPC_REG_RESET, regVal);
+
+ /* delay 10 usec */
+ udelay(10);
+
+ /* bring chip reset out of reset */
+ regVal = pm8001_cr32(pm8001_ha, 1, SPC_REG_RESET);
+ regVal |= SPC_REG_RESET_DEVICE;
+ pm8001_cw32(pm8001_ha, 1, SPC_REG_RESET, regVal);
+
+ /* delay 10 usec */
+ udelay(10);
+
+ /* wait for 20 msec until the firmware gets reloaded */
+ i = 20;
+ do {
+ mdelay(1);
+ } while ((--i) != 0);
+
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("chip reset finished\n"));
+}
+
+/**
+ * pm8001_chip_iounmap - which maped when initilized.
+ * @pm8001_ha: our hba card information
+ */
+static void pm8001_chip_iounmap(struct pm8001_hba_info *pm8001_ha)
+{
+ s8 bar, logical = 0;
+ for (bar = 0; bar < 6; bar++) {
+ /*
+ ** logical BARs for SPC:
+ ** bar 0 and 1 - logical BAR0
+ ** bar 2 and 3 - logical BAR1
+ ** bar4 - logical BAR2
+ ** bar5 - logical BAR3
+ ** Skip the appropriate assignments:
+ */
+ if ((bar == 1) || (bar == 3))
+ continue;
+ if (pm8001_ha->io_mem[logical].memvirtaddr) {
+ iounmap(pm8001_ha->io_mem[logical].memvirtaddr);
+ logical++;
+ }
+ }
+}
+
+/**
+ * pm8001_chip_interrupt_enable - enable PM8001 chip interrupt
+ * @pm8001_ha: our hba card information
+ */
+static void
+pm8001_chip_intx_interrupt_enable(struct pm8001_hba_info *pm8001_ha)
+{
+ pm8001_cw32(pm8001_ha, 0, MSGU_ODMR, ODMR_CLEAR_ALL);
+ pm8001_cw32(pm8001_ha, 0, MSGU_ODCR, ODCR_CLEAR_ALL);
+}
+
+ /**
+ * pm8001_chip_intx_interrupt_disable- disable PM8001 chip interrupt
+ * @pm8001_ha: our hba card information
+ */
+static void
+pm8001_chip_intx_interrupt_disable(struct pm8001_hba_info *pm8001_ha)
+{
+ pm8001_cw32(pm8001_ha, 0, MSGU_ODMR, ODMR_MASK_ALL);
+}
+
+/**
+ * pm8001_chip_msix_interrupt_enable - enable PM8001 chip interrupt
+ * @pm8001_ha: our hba card information
+ */
+static void
+pm8001_chip_msix_interrupt_enable(struct pm8001_hba_info *pm8001_ha,
+ u32 int_vec_idx)
+{
+ u32 msi_index;
+ u32 value;
+ msi_index = int_vec_idx * MSIX_TABLE_ELEMENT_SIZE;
+ msi_index += MSIX_TABLE_BASE;
+ pm8001_cw32(pm8001_ha, 0, msi_index, MSIX_INTERRUPT_ENABLE);
+ value = (1 << int_vec_idx);
+ pm8001_cw32(pm8001_ha, 0, MSGU_ODCR, value);
+
+}
+
+/**
+ * pm8001_chip_msix_interrupt_disable - disable PM8001 chip interrupt
+ * @pm8001_ha: our hba card information
+ */
+static void
+pm8001_chip_msix_interrupt_disable(struct pm8001_hba_info *pm8001_ha,
+ u32 int_vec_idx)
+{
+ u32 msi_index;
+ msi_index = int_vec_idx * MSIX_TABLE_ELEMENT_SIZE;
+ msi_index += MSIX_TABLE_BASE;
+ pm8001_cw32(pm8001_ha, 0, msi_index, MSIX_INTERRUPT_DISABLE);
+
+}
+/**
+ * pm8001_chip_interrupt_enable - enable PM8001 chip interrupt
+ * @pm8001_ha: our hba card information
+ */
+static void
+pm8001_chip_interrupt_enable(struct pm8001_hba_info *pm8001_ha)
+{
+#ifdef PM8001_USE_MSIX
+ pm8001_chip_msix_interrupt_enable(pm8001_ha, 0);
+ return;
+#endif
+ pm8001_chip_intx_interrupt_enable(pm8001_ha);
+
+}
+
+/**
+ * pm8001_chip_intx_interrupt_disable- disable PM8001 chip interrupt
+ * @pm8001_ha: our hba card information
+ */
+static void
+pm8001_chip_interrupt_disable(struct pm8001_hba_info *pm8001_ha)
+{
+#ifdef PM8001_USE_MSIX
+ pm8001_chip_msix_interrupt_disable(pm8001_ha, 0);
+ return;
+#endif
+ pm8001_chip_intx_interrupt_disable(pm8001_ha);
+
+}
+
+/**
+ * mpi_msg_free_get- get the free message buffer for transfer inbound queue.
+ * @circularQ: the inbound queue we want to transfer to HBA.
+ * @messageSize: the message size of this transfer, normally it is 64 bytes
+ * @messagePtr: the pointer to message.
+ */
+static int mpi_msg_free_get(struct inbound_queue_table *circularQ,
+ u16 messageSize, void **messagePtr)
+{
+ u32 offset, consumer_index;
+ struct mpi_msg_hdr *msgHeader;
+ u8 bcCount = 1; /* only support single buffer */
+
+ /* Checks is the requested message size can be allocated in this queue*/
+ if (messageSize > 64) {
+ *messagePtr = NULL;
+ return -1;
+ }
+
+ /* Stores the new consumer index */
+ consumer_index = pm8001_read_32(circularQ->ci_virt);
+ circularQ->consumer_index = cpu_to_le32(consumer_index);
+ if (((circularQ->producer_idx + bcCount) % 256) ==
+ circularQ->consumer_index) {
+ *messagePtr = NULL;
+ return -1;
+ }
+ /* get memory IOMB buffer address */
+ offset = circularQ->producer_idx * 64;
+ /* increment to next bcCount element */
+ circularQ->producer_idx = (circularQ->producer_idx + bcCount) % 256;
+ /* Adds that distance to the base of the region virtual address plus
+ the message header size*/
+ msgHeader = (struct mpi_msg_hdr *)(circularQ->base_virt + offset);
+ *messagePtr = ((void *)msgHeader) + sizeof(struct mpi_msg_hdr);
+ return 0;
+}
+
+/**
+ * mpi_build_cmd- build the message queue for transfer, update the PI to FW
+ * to tell the fw to get this message from IOMB.
+ * @pm8001_ha: our hba card information
+ * @circularQ: the inbound queue we want to transfer to HBA.
+ * @opCode: the operation code represents commands which LLDD and fw recognized.
+ * @payload: the command payload of each operation command.
+ */
+static int mpi_build_cmd(struct pm8001_hba_info *pm8001_ha,
+ struct inbound_queue_table *circularQ,
+ u32 opCode, void *payload)
+{
+ u32 Header = 0, hpriority = 0, bc = 1, category = 0x02;
+ u32 responseQueue = 0;
+ void *pMessage;
+
+ if (mpi_msg_free_get(circularQ, 64, &pMessage) < 0) {
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("No free mpi buffer \n"));
+ return -1;
+ }
+ BUG_ON(!payload);
+ /*Copy to the payload*/
+ memcpy(pMessage, payload, (64 - sizeof(struct mpi_msg_hdr)));
+
+ /*Build the header*/
+ Header = ((1 << 31) | (hpriority << 30) | ((bc & 0x1f) << 24)
+ | ((responseQueue & 0x3F) << 16)
+ | ((category & 0xF) << 12) | (opCode & 0xFFF));
+
+ pm8001_write_32((pMessage - 4), 0, cpu_to_le32(Header));
+ /*Update the PI to the firmware*/
+ pm8001_cw32(pm8001_ha, circularQ->pi_pci_bar,
+ circularQ->pi_offset, circularQ->producer_idx);
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("after PI= %d CI= %d \n", circularQ->producer_idx,
+ circularQ->consumer_index));
+ return 0;
+}
+
+static u32 mpi_msg_free_set(struct pm8001_hba_info *pm8001_ha, void *pMsg,
+ struct outbound_queue_table *circularQ, u8 bc)
+{
+ u32 producer_index;
+ struct mpi_msg_hdr *msgHeader;
+ struct mpi_msg_hdr *pOutBoundMsgHeader;
+
+ msgHeader = (struct mpi_msg_hdr *)(pMsg - sizeof(struct mpi_msg_hdr));
+ pOutBoundMsgHeader = (struct mpi_msg_hdr *)(circularQ->base_virt +
+ circularQ->consumer_idx * 64);
+ if (pOutBoundMsgHeader != msgHeader) {
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("consumer_idx = %d msgHeader = %p\n",
+ circularQ->consumer_idx, msgHeader));
+
+ /* Update the producer index from SPC */
+ producer_index = pm8001_read_32(circularQ->pi_virt);
+ circularQ->producer_index = cpu_to_le32(producer_index);
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("consumer_idx = %d producer_index = %d"
+ "msgHeader = %p\n", circularQ->consumer_idx,
+ circularQ->producer_index, msgHeader));
+ return 0;
+ }
+ /* free the circular queue buffer elements associated with the message*/
+ circularQ->consumer_idx = (circularQ->consumer_idx + bc) % 256;
+ /* update the CI of outbound queue */
+ pm8001_cw32(pm8001_ha, circularQ->ci_pci_bar, circularQ->ci_offset,
+ circularQ->consumer_idx);
+ /* Update the producer index from SPC*/
+ producer_index = pm8001_read_32(circularQ->pi_virt);
+ circularQ->producer_index = cpu_to_le32(producer_index);
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk(" CI=%d PI=%d\n", circularQ->consumer_idx,
+ circularQ->producer_index));
+ return 0;
+}
+
+/**
+ * mpi_msg_consume- get the MPI message from outbound queue message table.
+ * @pm8001_ha: our hba card information
+ * @circularQ: the outbound queue table.
+ * @messagePtr1: the message contents of this outbound message.
+ * @pBC: the message size.
+ */
+static u32 mpi_msg_consume(struct pm8001_hba_info *pm8001_ha,
+ struct outbound_queue_table *circularQ,
+ void **messagePtr1, u8 *pBC)
+{
+ struct mpi_msg_hdr *msgHeader;
+ __le32 msgHeader_tmp;
+ u32 header_tmp;
+ do {
+ /* If there are not-yet-delivered messages ... */
+ if (circularQ->producer_index != circularQ->consumer_idx) {
+ /*Get the pointer to the circular queue buffer element*/
+ msgHeader = (struct mpi_msg_hdr *)
+ (circularQ->base_virt +
+ circularQ->consumer_idx * 64);
+ /* read header */
+ header_tmp = pm8001_read_32(msgHeader);
+ msgHeader_tmp = cpu_to_le32(header_tmp);
+ if (0 != (msgHeader_tmp & 0x80000000)) {
+ if (OPC_OUB_SKIP_ENTRY !=
+ (msgHeader_tmp & 0xfff)) {
+ *messagePtr1 =
+ ((u8 *)msgHeader) +
+ sizeof(struct mpi_msg_hdr);
+ *pBC = (u8)((msgHeader_tmp >> 24) &
+ 0x1f);
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk(": CI=%d PI=%d "
+ "msgHeader=%x\n",
+ circularQ->consumer_idx,
+ circularQ->producer_index,
+ msgHeader_tmp));
+ return MPI_IO_STATUS_SUCCESS;
+ } else {
+ circularQ->consumer_idx =
+ (circularQ->consumer_idx +
+ ((msgHeader_tmp >> 24) & 0x1f))
+ % 256;
+ msgHeader_tmp = 0;
+ pm8001_write_32(msgHeader, 0, 0);
+ /* update the CI of outbound queue */
+ pm8001_cw32(pm8001_ha,
+ circularQ->ci_pci_bar,
+ circularQ->ci_offset,
+ circularQ->consumer_idx);
+ }
+ } else {
+ circularQ->consumer_idx =
+ (circularQ->consumer_idx +
+ ((msgHeader_tmp >> 24) & 0x1f)) % 256;
+ msgHeader_tmp = 0;
+ pm8001_write_32(msgHeader, 0, 0);
+ /* update the CI of outbound queue */
+ pm8001_cw32(pm8001_ha, circularQ->ci_pci_bar,
+ circularQ->ci_offset,
+ circularQ->consumer_idx);
+ return MPI_IO_STATUS_FAIL;
+ }
+ } else {
+ u32 producer_index;
+ void *pi_virt = circularQ->pi_virt;
+ /* Update the producer index from SPC */
+ producer_index = pm8001_read_32(pi_virt);
+ circularQ->producer_index = cpu_to_le32(producer_index);
+ }
+ } while (circularQ->producer_index != circularQ->consumer_idx);
+ /* while we don't have any more not-yet-delivered message */
+ /* report empty */
+ return MPI_IO_STATUS_BUSY;
+}
+
+static void pm8001_work_queue(struct work_struct *work)
+{
+ struct delayed_work *dw = container_of(work, struct delayed_work, work);
+ struct pm8001_wq *wq = container_of(dw, struct pm8001_wq, work_q);
+ struct pm8001_device *pm8001_dev;
+ struct domain_device *dev;
+
+ switch (wq->handler) {
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS:
+ pm8001_dev = wq->data;
+ dev = pm8001_dev->sas_device;
+ pm8001_I_T_nexus_reset(dev);
+ break;
+ case IO_OPEN_CNX_ERROR_STP_RESOURCES_BUSY:
+ pm8001_dev = wq->data;
+ dev = pm8001_dev->sas_device;
+ pm8001_I_T_nexus_reset(dev);
+ break;
+ case IO_DS_IN_ERROR:
+ pm8001_dev = wq->data;
+ dev = pm8001_dev->sas_device;
+ pm8001_I_T_nexus_reset(dev);
+ break;
+ case IO_DS_NON_OPERATIONAL:
+ pm8001_dev = wq->data;
+ dev = pm8001_dev->sas_device;
+ pm8001_I_T_nexus_reset(dev);
+ break;
+ }
+ list_del(&wq->entry);
+ kfree(wq);
+}
+
+static int pm8001_handle_event(struct pm8001_hba_info *pm8001_ha, void *data,
+ int handler)
+{
+ struct pm8001_wq *wq;
+ int ret = 0;
+
+ wq = kmalloc(sizeof(struct pm8001_wq), GFP_ATOMIC);
+ if (wq) {
+ wq->pm8001_ha = pm8001_ha;
+ wq->data = data;
+ wq->handler = handler;
+ INIT_DELAYED_WORK(&wq->work_q, pm8001_work_queue);
+ list_add_tail(&wq->entry, &pm8001_ha->wq_list);
+ schedule_delayed_work(&wq->work_q, 0);
+ } else
+ ret = -ENOMEM;
+
+ return ret;
+}
+
+/**
+ * mpi_ssp_completion- process the event that FW response to the SSP request.
+ * @pm8001_ha: our hba card information
+ * @piomb: the message contents of this outbound message.
+ *
+ * When FW has completed a ssp request for example a IO request, after it has
+ * filled the SG data with the data, it will trigger this event represent
+ * that he has finished the job,please check the coresponding buffer.
+ * So we will tell the caller who maybe waiting the result to tell upper layer
+ * that the task has been finished.
+ */
+static void
+mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha , void *piomb)
+{
+ struct sas_task *t;
+ struct pm8001_ccb_info *ccb;
+ unsigned long flags;
+ u32 status;
+ u32 param;
+ u32 tag;
+ struct ssp_completion_resp *psspPayload;
+ struct task_status_struct *ts;
+ struct ssp_response_iu *iu;
+ struct pm8001_device *pm8001_dev;
+ psspPayload = (struct ssp_completion_resp *)(piomb + 4);
+ status = le32_to_cpu(psspPayload->status);
+ tag = le32_to_cpu(psspPayload->tag);
+ ccb = &pm8001_ha->ccb_info[tag];
+ pm8001_dev = ccb->device;
+ param = le32_to_cpu(psspPayload->param);
+
+ t = ccb->task;
+
+ if (status && status != IO_UNDERFLOW)
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("sas IO status 0x%x\n", status));
+ if (unlikely(!t || !t->lldd_task || !t->dev))
+ return;
+ ts = &t->task_status;
+ switch (status) {
+ case IO_SUCCESS:
+ PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_SUCCESS"
+ ",param = %d \n", param));
+ if (param == 0) {
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAM_GOOD;
+ } else {
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_PROTO_RESPONSE;
+ ts->residual = param;
+ iu = &psspPayload->ssp_resp_iu;
+ sas_ssp_task_response(pm8001_ha->dev, t, iu);
+ }
+ if (pm8001_dev)
+ pm8001_dev->running_req--;
+ break;
+ case IO_ABORTED:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_ABORTED IOMB Tag \n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_ABORTED_TASK;
+ break;
+ case IO_UNDERFLOW:
+ /* SSP Completion with error */
+ PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_UNDERFLOW"
+ ",param = %d \n", param));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DATA_UNDERRUN;
+ ts->residual = param;
+ if (pm8001_dev)
+ pm8001_dev->running_req--;
+ break;
+ case IO_NO_DEVICE:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_NO_DEVICE\n"));
+ ts->resp = SAS_TASK_UNDELIVERED;
+ ts->stat = SAS_PHY_DOWN;
+ break;
+ case IO_XFER_ERROR_BREAK:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_BREAK\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ break;
+ case IO_XFER_ERROR_PHY_NOT_READY:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_PHY_NOT_READY\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ break;
+ case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_EPROTO;
+ break;
+ case IO_OPEN_CNX_ERROR_ZONE_VIOLATION:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_UNKNOWN;
+ break;
+ case IO_OPEN_CNX_ERROR_BREAK:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_BREAK\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ break;
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_UNKNOWN;
+ if (!t->uldd_task)
+ pm8001_handle_event(pm8001_ha,
+ pm8001_dev,
+ IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS);
+ break;
+ case IO_OPEN_CNX_ERROR_BAD_DESTINATION:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_BAD_DESTINATION\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_BAD_DEST;
+ break;
+ case IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_CONNECTION_RATE_"
+ "NOT_SUPPORTED\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_CONN_RATE;
+ break;
+ case IO_OPEN_CNX_ERROR_WRONG_DESTINATION:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n"));
+ ts->resp = SAS_TASK_UNDELIVERED;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_WRONG_DEST;
+ break;
+ case IO_XFER_ERROR_NAK_RECEIVED:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_NAK_RECEIVED\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ break;
+ case IO_XFER_ERROR_ACK_NAK_TIMEOUT:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_ACK_NAK_TIMEOUT\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_NAK_R_ERR;
+ break;
+ case IO_XFER_ERROR_DMA:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_DMA\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ break;
+ case IO_XFER_OPEN_RETRY_TIMEOUT:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_OPEN_RETRY_TIMEOUT\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ break;
+ case IO_XFER_ERROR_OFFSET_MISMATCH:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_OFFSET_MISMATCH\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ break;
+ case IO_PORT_IN_RESET:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_PORT_IN_RESET\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ break;
+ case IO_DS_NON_OPERATIONAL:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_DS_NON_OPERATIONAL\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ if (!t->uldd_task)
+ pm8001_handle_event(pm8001_ha,
+ pm8001_dev,
+ IO_DS_NON_OPERATIONAL);
+ break;
+ case IO_DS_IN_RECOVERY:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_DS_IN_RECOVERY\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ break;
+ case IO_TM_TAG_NOT_FOUND:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_TM_TAG_NOT_FOUND\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ break;
+ case IO_SSP_EXT_IU_ZERO_LEN_ERROR:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_SSP_EXT_IU_ZERO_LEN_ERROR\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ break;
+ case IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ default:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("Unknown status 0x%x\n", status));
+ /* not allowed case. Therefore, return failed status */
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ break;
+ }
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("scsi_status = %x \n ",
+ psspPayload->ssp_resp_iu.status));
+ spin_lock_irqsave(&t->task_state_lock, flags);
+ t->task_state_flags &= ~SAS_TASK_STATE_PENDING;
+ t->task_state_flags &= ~SAS_TASK_AT_INITIATOR;
+ t->task_state_flags |= SAS_TASK_STATE_DONE;
+ if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) {
+ spin_unlock_irqrestore(&t->task_state_lock, flags);
+ PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("task 0x%p done with"
+ " io_status 0x%x resp 0x%x "
+ "stat 0x%x but aborted by upper layer!\n",
+ t, status, ts->resp, ts->stat));
+ pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
+ } else {
+ spin_unlock_irqrestore(&t->task_state_lock, flags);
+ pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
+ mb();/* in order to force CPU ordering */
+ t->task_done(t);
+ }
+}
+
+/*See the comments for mpi_ssp_completion */
+static void mpi_ssp_event(struct pm8001_hba_info *pm8001_ha , void *piomb)
+{
+ struct sas_task *t;
+ unsigned long flags;
+ struct task_status_struct *ts;
+ struct pm8001_ccb_info *ccb;
+ struct pm8001_device *pm8001_dev;
+ struct ssp_event_resp *psspPayload =
+ (struct ssp_event_resp *)(piomb + 4);
+ u32 event = le32_to_cpu(psspPayload->event);
+ u32 tag = le32_to_cpu(psspPayload->tag);
+ u32 port_id = le32_to_cpu(psspPayload->port_id);
+ u32 dev_id = le32_to_cpu(psspPayload->device_id);
+
+ ccb = &pm8001_ha->ccb_info[tag];
+ t = ccb->task;
+ pm8001_dev = ccb->device;
+ if (event)
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("sas IO status 0x%x\n", event));
+ if (unlikely(!t || !t->lldd_task || !t->dev))
+ return;
+ ts = &t->task_status;
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("port_id = %x,device_id = %x\n",
+ port_id, dev_id));
+ switch (event) {
+ case IO_OVERFLOW:
+ PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_UNDERFLOW\n");)
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DATA_OVERRUN;
+ ts->residual = 0;
+ if (pm8001_dev)
+ pm8001_dev->running_req--;
+ break;
+ case IO_XFER_ERROR_BREAK:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_BREAK\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_INTERRUPTED;
+ break;
+ case IO_XFER_ERROR_PHY_NOT_READY:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_PHY_NOT_READY\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ break;
+ case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_PROTOCOL_NOT"
+ "_SUPPORTED\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_EPROTO;
+ break;
+ case IO_OPEN_CNX_ERROR_ZONE_VIOLATION:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_UNKNOWN;
+ break;
+ case IO_OPEN_CNX_ERROR_BREAK:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_BREAK\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ break;
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_UNKNOWN;
+ if (!t->uldd_task)
+ pm8001_handle_event(pm8001_ha,
+ pm8001_dev,
+ IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS);
+ break;
+ case IO_OPEN_CNX_ERROR_BAD_DESTINATION:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_BAD_DESTINATION\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_BAD_DEST;
+ break;
+ case IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_CONNECTION_RATE_"
+ "NOT_SUPPORTED\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_CONN_RATE;
+ break;
+ case IO_OPEN_CNX_ERROR_WRONG_DESTINATION:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_WRONG_DEST;
+ break;
+ case IO_XFER_ERROR_NAK_RECEIVED:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_NAK_RECEIVED\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ break;
+ case IO_XFER_ERROR_ACK_NAK_TIMEOUT:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_ACK_NAK_TIMEOUT\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_NAK_R_ERR;
+ break;
+ case IO_XFER_OPEN_RETRY_TIMEOUT:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_OPEN_RETRY_TIMEOUT\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ break;
+ case IO_XFER_ERROR_UNEXPECTED_PHASE:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_UNEXPECTED_PHASE\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DATA_OVERRUN;
+ break;
+ case IO_XFER_ERROR_XFER_RDY_OVERRUN:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_XFER_RDY_OVERRUN\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DATA_OVERRUN;
+ break;
+ case IO_XFER_ERROR_XFER_RDY_NOT_EXPECTED:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_XFER_RDY_NOT_EXPECTED\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DATA_OVERRUN;
+ break;
+ case IO_XFER_ERROR_CMD_ISSUE_ACK_NAK_TIMEOUT:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_CMD_ISSUE_ACK_NAK_TIMEOUT\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DATA_OVERRUN;
+ break;
+ case IO_XFER_ERROR_OFFSET_MISMATCH:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_OFFSET_MISMATCH\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DATA_OVERRUN;
+ break;
+ case IO_XFER_ERROR_XFER_ZERO_DATA_LEN:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_XFER_ZERO_DATA_LEN\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DATA_OVERRUN;
+ break;
+ case IO_XFER_CMD_FRAME_ISSUED:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk(" IO_XFER_CMD_FRAME_ISSUED\n"));
+ return;
+ default:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("Unknown status 0x%x\n", event));
+ /* not allowed case. Therefore, return failed status */
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DATA_OVERRUN;
+ break;
+ }
+ spin_lock_irqsave(&t->task_state_lock, flags);
+ t->task_state_flags &= ~SAS_TASK_STATE_PENDING;
+ t->task_state_flags &= ~SAS_TASK_AT_INITIATOR;
+ t->task_state_flags |= SAS_TASK_STATE_DONE;
+ if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) {
+ spin_unlock_irqrestore(&t->task_state_lock, flags);
+ PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("task 0x%p done with"
+ " event 0x%x resp 0x%x "
+ "stat 0x%x but aborted by upper layer!\n",
+ t, event, ts->resp, ts->stat));
+ pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
+ } else {
+ spin_unlock_irqrestore(&t->task_state_lock, flags);
+ pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
+ mb();/* in order to force CPU ordering */
+ t->task_done(t);
+ }
+}
+
+/*See the comments for mpi_ssp_completion */
+static void
+mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+ struct sas_task *t;
+ struct pm8001_ccb_info *ccb;
+ unsigned long flags;
+ u32 param;
+ u32 status;
+ u32 tag;
+ struct sata_completion_resp *psataPayload;
+ struct task_status_struct *ts;
+ struct ata_task_resp *resp ;
+ u32 *sata_resp;
+ struct pm8001_device *pm8001_dev;
+
+ psataPayload = (struct sata_completion_resp *)(piomb + 4);
+ status = le32_to_cpu(psataPayload->status);
+ tag = le32_to_cpu(psataPayload->tag);
+
+ ccb = &pm8001_ha->ccb_info[tag];
+ param = le32_to_cpu(psataPayload->param);
+ t = ccb->task;
+ ts = &t->task_status;
+ pm8001_dev = ccb->device;
+ if (status)
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("sata IO status 0x%x\n", status));
+ if (unlikely(!t || !t->lldd_task || !t->dev))
+ return;
+
+ switch (status) {
+ case IO_SUCCESS:
+ PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_SUCCESS\n"));
+ if (param == 0) {
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAM_GOOD;
+ } else {
+ u8 len;
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_PROTO_RESPONSE;
+ ts->residual = param;
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("SAS_PROTO_RESPONSE len = %d\n",
+ param));
+ sata_resp = &psataPayload->sata_resp[0];
+ resp = (struct ata_task_resp *)ts->buf;
+ if (t->ata_task.dma_xfer == 0 &&
+ t->data_dir == PCI_DMA_FROMDEVICE) {
+ len = sizeof(struct pio_setup_fis);
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("PIO read len = %d\n", len));
+ } else if (t->ata_task.use_ncq) {
+ len = sizeof(struct set_dev_bits_fis);
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("FPDMA len = %d\n", len));
+ } else {
+ len = sizeof(struct dev_to_host_fis);
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("other len = %d\n", len));
+ }
+ if (SAS_STATUS_BUF_SIZE >= sizeof(*resp)) {
+ resp->frame_len = len;
+ memcpy(&resp->ending_fis[0], sata_resp, len);
+ ts->buf_valid_size = sizeof(*resp);
+ } else
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("response to large \n"));
+ }
+ if (pm8001_dev)
+ pm8001_dev->running_req--;
+ break;
+ case IO_ABORTED:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_ABORTED IOMB Tag \n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_ABORTED_TASK;
+ if (pm8001_dev)
+ pm8001_dev->running_req--;
+ break;
+ /* following cases are to do cases */
+ case IO_UNDERFLOW:
+ /* SATA Completion with error */
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_UNDERFLOW param = %d\n", param));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DATA_UNDERRUN;
+ ts->residual = param;
+ if (pm8001_dev)
+ pm8001_dev->running_req--;
+ break;
+ case IO_NO_DEVICE:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_NO_DEVICE\n"));
+ ts->resp = SAS_TASK_UNDELIVERED;
+ ts->stat = SAS_PHY_DOWN;
+ break;
+ case IO_XFER_ERROR_BREAK:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_BREAK\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_INTERRUPTED;
+ break;
+ case IO_XFER_ERROR_PHY_NOT_READY:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_PHY_NOT_READY\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ break;
+ case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_PROTOCOL_NOT"
+ "_SUPPORTED\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_EPROTO;
+ break;
+ case IO_OPEN_CNX_ERROR_ZONE_VIOLATION:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_UNKNOWN;
+ break;
+ case IO_OPEN_CNX_ERROR_BREAK:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_BREAK\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_CONT0;
+ break;
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DEV_NO_RESPONSE;
+ if (!t->uldd_task) {
+ pm8001_handle_event(pm8001_ha,
+ pm8001_dev,
+ IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS);
+ ts->resp = SAS_TASK_UNDELIVERED;
+ ts->stat = SAS_QUEUE_FULL;
+ pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
+ mb();/*in order to force CPU ordering*/
+ t->task_done(t);
+ return;
+ }
+ break;
+ case IO_OPEN_CNX_ERROR_BAD_DESTINATION:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_BAD_DESTINATION\n"));
+ ts->resp = SAS_TASK_UNDELIVERED;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_BAD_DEST;
+ if (!t->uldd_task) {
+ pm8001_handle_event(pm8001_ha,
+ pm8001_dev,
+ IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS);
+ ts->resp = SAS_TASK_UNDELIVERED;
+ ts->stat = SAS_QUEUE_FULL;
+ pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
+ mb();/*ditto*/
+ t->task_done(t);
+ return;
+ }
+ break;
+ case IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_CONNECTION_RATE_"
+ "NOT_SUPPORTED\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_CONN_RATE;
+ break;
+ case IO_OPEN_CNX_ERROR_STP_RESOURCES_BUSY:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_STP_RESOURCES"
+ "_BUSY\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DEV_NO_RESPONSE;
+ if (!t->uldd_task) {
+ pm8001_handle_event(pm8001_ha,
+ pm8001_dev,
+ IO_OPEN_CNX_ERROR_STP_RESOURCES_BUSY);
+ ts->resp = SAS_TASK_UNDELIVERED;
+ ts->stat = SAS_QUEUE_FULL;
+ pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
+ mb();/* ditto*/
+ t->task_done(t);
+ return;
+ }
+ break;
+ case IO_OPEN_CNX_ERROR_WRONG_DESTINATION:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_WRONG_DEST;
+ break;
+ case IO_XFER_ERROR_NAK_RECEIVED:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_NAK_RECEIVED\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_NAK_R_ERR;
+ break;
+ case IO_XFER_ERROR_ACK_NAK_TIMEOUT:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_ACK_NAK_TIMEOUT\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_NAK_R_ERR;
+ break;
+ case IO_XFER_ERROR_DMA:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_DMA\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_ABORTED_TASK;
+ break;
+ case IO_XFER_ERROR_SATA_LINK_TIMEOUT:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_SATA_LINK_TIMEOUT\n"));
+ ts->resp = SAS_TASK_UNDELIVERED;
+ ts->stat = SAS_DEV_NO_RESPONSE;
+ break;
+ case IO_XFER_ERROR_REJECTED_NCQ_MODE:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_REJECTED_NCQ_MODE\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DATA_UNDERRUN;
+ break;
+ case IO_XFER_OPEN_RETRY_TIMEOUT:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_OPEN_RETRY_TIMEOUT\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_TO;
+ break;
+ case IO_PORT_IN_RESET:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_PORT_IN_RESET\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DEV_NO_RESPONSE;
+ break;
+ case IO_DS_NON_OPERATIONAL:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_DS_NON_OPERATIONAL\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DEV_NO_RESPONSE;
+ if (!t->uldd_task) {
+ pm8001_handle_event(pm8001_ha, pm8001_dev,
+ IO_DS_NON_OPERATIONAL);
+ ts->resp = SAS_TASK_UNDELIVERED;
+ ts->stat = SAS_QUEUE_FULL;
+ pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
+ mb();/*ditto*/
+ t->task_done(t);
+ return;
+ }
+ break;
+ case IO_DS_IN_RECOVERY:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk(" IO_DS_IN_RECOVERY\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DEV_NO_RESPONSE;
+ break;
+ case IO_DS_IN_ERROR:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_DS_IN_ERROR\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DEV_NO_RESPONSE;
+ if (!t->uldd_task) {
+ pm8001_handle_event(pm8001_ha, pm8001_dev,
+ IO_DS_IN_ERROR);
+ ts->resp = SAS_TASK_UNDELIVERED;
+ ts->stat = SAS_QUEUE_FULL;
+ pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
+ mb();/*ditto*/
+ t->task_done(t);
+ return;
+ }
+ break;
+ case IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ default:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("Unknown status 0x%x\n", status));
+ /* not allowed case. Therefore, return failed status */
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DEV_NO_RESPONSE;
+ break;
+ }
+ spin_lock_irqsave(&t->task_state_lock, flags);
+ t->task_state_flags &= ~SAS_TASK_STATE_PENDING;
+ t->task_state_flags &= ~SAS_TASK_AT_INITIATOR;
+ t->task_state_flags |= SAS_TASK_STATE_DONE;
+ if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) {
+ spin_unlock_irqrestore(&t->task_state_lock, flags);
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("task 0x%p done with io_status 0x%x"
+ " resp 0x%x stat 0x%x but aborted by upper layer!\n",
+ t, status, ts->resp, ts->stat));
+ pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
+ } else {
+ spin_unlock_irqrestore(&t->task_state_lock, flags);
+ pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
+ mb();/* ditto */
+ t->task_done(t);
+ }
+}
+
+/*See the comments for mpi_ssp_completion */
+static void mpi_sata_event(struct pm8001_hba_info *pm8001_ha , void *piomb)
+{
+ struct sas_task *t;
+ unsigned long flags;
+ struct task_status_struct *ts;
+ struct pm8001_ccb_info *ccb;
+ struct pm8001_device *pm8001_dev;
+ struct sata_event_resp *psataPayload =
+ (struct sata_event_resp *)(piomb + 4);
+ u32 event = le32_to_cpu(psataPayload->event);
+ u32 tag = le32_to_cpu(psataPayload->tag);
+ u32 port_id = le32_to_cpu(psataPayload->port_id);
+ u32 dev_id = le32_to_cpu(psataPayload->device_id);
+
+ ccb = &pm8001_ha->ccb_info[tag];
+ t = ccb->task;
+ pm8001_dev = ccb->device;
+ if (event)
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("sata IO status 0x%x\n", event));
+ if (unlikely(!t || !t->lldd_task || !t->dev))
+ return;
+ ts = &t->task_status;
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("port_id = %x,device_id = %x\n",
+ port_id, dev_id));
+ switch (event) {
+ case IO_OVERFLOW:
+ PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_UNDERFLOW\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DATA_OVERRUN;
+ ts->residual = 0;
+ if (pm8001_dev)
+ pm8001_dev->running_req--;
+ break;
+ case IO_XFER_ERROR_BREAK:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_BREAK\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_INTERRUPTED;
+ break;
+ case IO_XFER_ERROR_PHY_NOT_READY:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_PHY_NOT_READY\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ break;
+ case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_PROTOCOL_NOT"
+ "_SUPPORTED\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_EPROTO;
+ break;
+ case IO_OPEN_CNX_ERROR_ZONE_VIOLATION:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_UNKNOWN;
+ break;
+ case IO_OPEN_CNX_ERROR_BREAK:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_BREAK\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_CONT0;
+ break;
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n"));
+ ts->resp = SAS_TASK_UNDELIVERED;
+ ts->stat = SAS_DEV_NO_RESPONSE;
+ if (!t->uldd_task) {
+ pm8001_handle_event(pm8001_ha,
+ pm8001_dev,
+ IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS);
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_QUEUE_FULL;
+ pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
+ mb();/*ditto*/
+ t->task_done(t);
+ return;
+ }
+ break;
+ case IO_OPEN_CNX_ERROR_BAD_DESTINATION:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_BAD_DESTINATION\n"));
+ ts->resp = SAS_TASK_UNDELIVERED;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_BAD_DEST;
+ break;
+ case IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_CONNECTION_RATE_"
+ "NOT_SUPPORTED\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_CONN_RATE;
+ break;
+ case IO_OPEN_CNX_ERROR_WRONG_DESTINATION:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_WRONG_DEST;
+ break;
+ case IO_XFER_ERROR_NAK_RECEIVED:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_NAK_RECEIVED\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_NAK_R_ERR;
+ break;
+ case IO_XFER_ERROR_PEER_ABORTED:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_PEER_ABORTED\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_NAK_R_ERR;
+ break;
+ case IO_XFER_ERROR_REJECTED_NCQ_MODE:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_REJECTED_NCQ_MODE\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DATA_UNDERRUN;
+ break;
+ case IO_XFER_OPEN_RETRY_TIMEOUT:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_OPEN_RETRY_TIMEOUT\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_TO;
+ break;
+ case IO_XFER_ERROR_UNEXPECTED_PHASE:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_UNEXPECTED_PHASE\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_TO;
+ break;
+ case IO_XFER_ERROR_XFER_RDY_OVERRUN:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_XFER_RDY_OVERRUN\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_TO;
+ break;
+ case IO_XFER_ERROR_XFER_RDY_NOT_EXPECTED:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_XFER_RDY_NOT_EXPECTED\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_TO;
+ break;
+ case IO_XFER_ERROR_OFFSET_MISMATCH:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_OFFSET_MISMATCH\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_TO;
+ break;
+ case IO_XFER_ERROR_XFER_ZERO_DATA_LEN:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_XFER_ZERO_DATA_LEN\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_TO;
+ break;
+ case IO_XFER_CMD_FRAME_ISSUED:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_CMD_FRAME_ISSUED\n"));
+ break;
+ case IO_XFER_PIO_SETUP_ERROR:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_PIO_SETUP_ERROR\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_TO;
+ break;
+ default:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("Unknown status 0x%x\n", event));
+ /* not allowed case. Therefore, return failed status */
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_TO;
+ break;
+ }
+ spin_lock_irqsave(&t->task_state_lock, flags);
+ t->task_state_flags &= ~SAS_TASK_STATE_PENDING;
+ t->task_state_flags &= ~SAS_TASK_AT_INITIATOR;
+ t->task_state_flags |= SAS_TASK_STATE_DONE;
+ if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) {
+ spin_unlock_irqrestore(&t->task_state_lock, flags);
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("task 0x%p done with io_status 0x%x"
+ " resp 0x%x stat 0x%x but aborted by upper layer!\n",
+ t, event, ts->resp, ts->stat));
+ pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
+ } else {
+ spin_unlock_irqrestore(&t->task_state_lock, flags);
+ pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
+ mb();/* in order to force CPU ordering */
+ t->task_done(t);
+ }
+}
+
+/*See the comments for mpi_ssp_completion */
+static void
+mpi_smp_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+ u32 param;
+ struct sas_task *t;
+ struct pm8001_ccb_info *ccb;
+ unsigned long flags;
+ u32 status;
+ u32 tag;
+ struct smp_completion_resp *psmpPayload;
+ struct task_status_struct *ts;
+ struct pm8001_device *pm8001_dev;
+
+ psmpPayload = (struct smp_completion_resp *)(piomb + 4);
+ status = le32_to_cpu(psmpPayload->status);
+ tag = le32_to_cpu(psmpPayload->tag);
+
+ ccb = &pm8001_ha->ccb_info[tag];
+ param = le32_to_cpu(psmpPayload->param);
+ t = ccb->task;
+ ts = &t->task_status;
+ pm8001_dev = ccb->device;
+ if (status)
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("smp IO status 0x%x\n", status));
+ if (unlikely(!t || !t->lldd_task || !t->dev))
+ return;
+
+ switch (status) {
+ case IO_SUCCESS:
+ PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_SUCCESS\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAM_GOOD;
+ if (pm8001_dev)
+ pm8001_dev->running_req--;
+ break;
+ case IO_ABORTED:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_ABORTED IOMB\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_ABORTED_TASK;
+ if (pm8001_dev)
+ pm8001_dev->running_req--;
+ break;
+ case IO_OVERFLOW:
+ PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_UNDERFLOW\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DATA_OVERRUN;
+ ts->residual = 0;
+ if (pm8001_dev)
+ pm8001_dev->running_req--;
+ break;
+ case IO_NO_DEVICE:
+ PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_NO_DEVICE\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_PHY_DOWN;
+ break;
+ case IO_ERROR_HW_TIMEOUT:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_ERROR_HW_TIMEOUT\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAM_BUSY;
+ break;
+ case IO_XFER_ERROR_BREAK:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_BREAK\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAM_BUSY;
+ break;
+ case IO_XFER_ERROR_PHY_NOT_READY:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_PHY_NOT_READY\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAM_BUSY;
+ break;
+ case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_UNKNOWN;
+ break;
+ case IO_OPEN_CNX_ERROR_ZONE_VIOLATION:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_UNKNOWN;
+ break;
+ case IO_OPEN_CNX_ERROR_BREAK:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_BREAK\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_CONT0;
+ break;
+ case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_UNKNOWN;
+ pm8001_handle_event(pm8001_ha,
+ pm8001_dev,
+ IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS);
+ break;
+ case IO_OPEN_CNX_ERROR_BAD_DESTINATION:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_BAD_DESTINATION\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_BAD_DEST;
+ break;
+ case IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_CONNECTION_RATE_"
+ "NOT_SUPPORTED\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_CONN_RATE;
+ break;
+ case IO_OPEN_CNX_ERROR_WRONG_DESTINATION:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_WRONG_DEST;
+ break;
+ case IO_XFER_ERROR_RX_FRAME:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_ERROR_RX_FRAME\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DEV_NO_RESPONSE;
+ break;
+ case IO_XFER_OPEN_RETRY_TIMEOUT:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_XFER_OPEN_RETRY_TIMEOUT\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ break;
+ case IO_ERROR_INTERNAL_SMP_RESOURCE:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_ERROR_INTERNAL_SMP_RESOURCE\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_QUEUE_FULL;
+ break;
+ case IO_PORT_IN_RESET:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_PORT_IN_RESET\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ break;
+ case IO_DS_NON_OPERATIONAL:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_DS_NON_OPERATIONAL\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DEV_NO_RESPONSE;
+ break;
+ case IO_DS_IN_RECOVERY:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_DS_IN_RECOVERY\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ break;
+ case IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_OPEN_REJECT;
+ ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+ break;
+ default:
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("Unknown status 0x%x\n", status));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAS_DEV_NO_RESPONSE;
+ /* not allowed case. Therefore, return failed status */
+ break;
+ }
+ spin_lock_irqsave(&t->task_state_lock, flags);
+ t->task_state_flags &= ~SAS_TASK_STATE_PENDING;
+ t->task_state_flags &= ~SAS_TASK_AT_INITIATOR;
+ t->task_state_flags |= SAS_TASK_STATE_DONE;
+ if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) {
+ spin_unlock_irqrestore(&t->task_state_lock, flags);
+ PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("task 0x%p done with"
+ " io_status 0x%x resp 0x%x "
+ "stat 0x%x but aborted by upper layer!\n",
+ t, status, ts->resp, ts->stat));
+ pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
+ } else {
+ spin_unlock_irqrestore(&t->task_state_lock, flags);
+ pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
+ mb();/* in order to force CPU ordering */
+ t->task_done(t);
+ }
+}
+
+static void
+mpi_set_dev_state_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+ struct set_dev_state_resp *pPayload =
+ (struct set_dev_state_resp *)(piomb + 4);
+ u32 tag = le32_to_cpu(pPayload->tag);
+ struct pm8001_ccb_info *ccb = &pm8001_ha->ccb_info[tag];
+ struct pm8001_device *pm8001_dev = ccb->device;
+ u32 status = le32_to_cpu(pPayload->status);
+ u32 device_id = le32_to_cpu(pPayload->device_id);
+ u8 pds = le32_to_cpu(pPayload->pds_nds) | PDS_BITS;
+ u8 nds = le32_to_cpu(pPayload->pds_nds) | NDS_BITS;
+ PM8001_MSG_DBG(pm8001_ha, pm8001_printk("Set device id = 0x%x state "
+ "from 0x%x to 0x%x status = 0x%x!\n",
+ device_id, pds, nds, status));
+ complete(pm8001_dev->setds_completion);
+ ccb->task = NULL;
+ ccb->ccb_tag = 0xFFFFFFFF;
+ pm8001_ccb_free(pm8001_ha, tag);
+}
+
+static void
+mpi_set_nvmd_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+ struct get_nvm_data_resp *pPayload =
+ (struct get_nvm_data_resp *)(piomb + 4);
+ u32 tag = le32_to_cpu(pPayload->tag);
+ struct pm8001_ccb_info *ccb = &pm8001_ha->ccb_info[tag];
+ u32 dlen_status = le32_to_cpu(pPayload->dlen_status);
+ complete(pm8001_ha->nvmd_completion);
+ PM8001_MSG_DBG(pm8001_ha, pm8001_printk("Set nvm data complete!\n"));
+ if ((dlen_status & NVMD_STAT) != 0) {
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("Set nvm data error!\n"));
+ return;
+ }
+ ccb->task = NULL;
+ ccb->ccb_tag = 0xFFFFFFFF;
+ pm8001_ccb_free(pm8001_ha, tag);
+}
+
+static void
+mpi_get_nvmd_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+ struct fw_control_ex *fw_control_context;
+ struct get_nvm_data_resp *pPayload =
+ (struct get_nvm_data_resp *)(piomb + 4);
+ u32 tag = le32_to_cpu(pPayload->tag);
+ struct pm8001_ccb_info *ccb = &pm8001_ha->ccb_info[tag];
+ u32 dlen_status = le32_to_cpu(pPayload->dlen_status);
+ u32 ir_tds_bn_dps_das_nvm =
+ le32_to_cpu(pPayload->ir_tda_bn_dps_das_nvm);
+ void *virt_addr = pm8001_ha->memoryMap.region[NVMD].virt_ptr;
+ fw_control_context = ccb->fw_control_context;
+
+ PM8001_MSG_DBG(pm8001_ha, pm8001_printk("Get nvm data complete!\n"));
+ if ((dlen_status & NVMD_STAT) != 0) {
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("Get nvm data error!\n"));
+ complete(pm8001_ha->nvmd_completion);
+ return;
+ }
+
+ if (ir_tds_bn_dps_das_nvm & IPMode) {
+ /* indirect mode - IR bit set */
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("Get NVMD success, IR=1\n"));
+ if ((ir_tds_bn_dps_das_nvm & NVMD_TYPE) == TWI_DEVICE) {
+ if (ir_tds_bn_dps_das_nvm == 0x80a80200) {
+ memcpy(pm8001_ha->sas_addr,
+ ((u8 *)virt_addr + 4),
+ SAS_ADDR_SIZE);
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("Get SAS address"
+ " from VPD successfully!\n"));
+ }
+ } else if (((ir_tds_bn_dps_das_nvm & NVMD_TYPE) == C_SEEPROM)
+ || ((ir_tds_bn_dps_das_nvm & NVMD_TYPE) == VPD_FLASH) ||
+ ((ir_tds_bn_dps_das_nvm & NVMD_TYPE) == EXPAN_ROM)) {
+ ;
+ } else if (((ir_tds_bn_dps_das_nvm & NVMD_TYPE) == AAP1_RDUMP)
+ || ((ir_tds_bn_dps_das_nvm & NVMD_TYPE) == IOP_RDUMP)) {
+ ;
+ } else {
+ /* Should not be happened*/
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("(IR=1)Wrong Device type 0x%x\n",
+ ir_tds_bn_dps_das_nvm));
+ }
+ } else /* direct mode */{
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("Get NVMD success, IR=0, dataLen=%d\n",
+ (dlen_status & NVMD_LEN) >> 24));
+ }
+ memcpy(fw_control_context->usrAddr,
+ pm8001_ha->memoryMap.region[NVMD].virt_ptr,
+ fw_control_context->len);
+ complete(pm8001_ha->nvmd_completion);
+ ccb->task = NULL;
+ ccb->ccb_tag = 0xFFFFFFFF;
+ pm8001_ccb_free(pm8001_ha, tag);
+}
+
+static int mpi_local_phy_ctl(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+ struct local_phy_ctl_resp *pPayload =
+ (struct local_phy_ctl_resp *)(piomb + 4);
+ u32 status = le32_to_cpu(pPayload->status);
+ u32 phy_id = le32_to_cpu(pPayload->phyop_phyid) & ID_BITS;
+ u32 phy_op = le32_to_cpu(pPayload->phyop_phyid) & OP_BITS;
+ if (status != 0) {
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("%x phy execute %x phy op failed! \n",
+ phy_id, phy_op));
+ } else
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("%x phy execute %x phy op success! \n",
+ phy_id, phy_op));
+ return 0;
+}
+
+/**
+ * pm8001_bytes_dmaed - one of the interface function communication with libsas
+ * @pm8001_ha: our hba card information
+ * @i: which phy that received the event.
+ *
+ * when HBA driver received the identify done event or initiate FIS received
+ * event(for SATA), it will invoke this function to notify the sas layer that
+ * the sas toplogy has formed, please discover the the whole sas domain,
+ * while receive a broadcast(change) primitive just tell the sas
+ * layer to discover the changed domain rather than the whole domain.
+ */
+static void pm8001_bytes_dmaed(struct pm8001_hba_info *pm8001_ha, int i)
+{
+ struct pm8001_phy *phy = &pm8001_ha->phy[i];
+ struct asd_sas_phy *sas_phy = &phy->sas_phy;
+ struct sas_ha_struct *sas_ha;
+ if (!phy->phy_attached)
+ return;
+
+ sas_ha = pm8001_ha->sas;
+ if (sas_phy->phy) {
+ struct sas_phy *sphy = sas_phy->phy;
+ sphy->negotiated_linkrate = sas_phy->linkrate;
+ sphy->minimum_linkrate = phy->minimum_linkrate;
+ sphy->minimum_linkrate_hw = SAS_LINK_RATE_1_5_GBPS;
+ sphy->maximum_linkrate = phy->maximum_linkrate;
+ sphy->maximum_linkrate_hw = phy->maximum_linkrate;
+ }
+
+ if (phy->phy_type & PORT_TYPE_SAS) {
+ struct sas_identify_frame *id;
+ id = (struct sas_identify_frame *)phy->frame_rcvd;
+ id->dev_type = phy->identify.device_type;
+ id->initiator_bits = SAS_PROTOCOL_ALL;
+ id->target_bits = phy->identify.target_port_protocols;
+ } else if (phy->phy_type & PORT_TYPE_SATA) {
+ /*Nothing*/
+ }
+ PM8001_MSG_DBG(pm8001_ha, pm8001_printk("phy %d byte dmaded.\n", i));
+
+ sas_phy->frame_rcvd_size = phy->frame_rcvd_size;
+ pm8001_ha->sas->notify_port_event(sas_phy, PORTE_BYTES_DMAED);
+}
+
+/* Get the link rate speed */
+static void get_lrate_mode(struct pm8001_phy *phy, u8 link_rate)
+{
+ struct sas_phy *sas_phy = phy->sas_phy.phy;
+
+ switch (link_rate) {
+ case PHY_SPEED_60:
+ phy->sas_phy.linkrate = SAS_LINK_RATE_6_0_GBPS;
+ phy->sas_phy.phy->negotiated_linkrate = SAS_LINK_RATE_6_0_GBPS;
+ break;
+ case PHY_SPEED_30:
+ phy->sas_phy.linkrate = SAS_LINK_RATE_3_0_GBPS;
+ phy->sas_phy.phy->negotiated_linkrate = SAS_LINK_RATE_3_0_GBPS;
+ break;
+ case PHY_SPEED_15:
+ phy->sas_phy.linkrate = SAS_LINK_RATE_1_5_GBPS;
+ phy->sas_phy.phy->negotiated_linkrate = SAS_LINK_RATE_1_5_GBPS;
+ break;
+ }
+ sas_phy->negotiated_linkrate = phy->sas_phy.linkrate;
+ sas_phy->maximum_linkrate_hw = SAS_LINK_RATE_6_0_GBPS;
+ sas_phy->minimum_linkrate_hw = SAS_LINK_RATE_1_5_GBPS;
+ sas_phy->maximum_linkrate = SAS_LINK_RATE_6_0_GBPS;
+ sas_phy->minimum_linkrate = SAS_LINK_RATE_1_5_GBPS;
+}
+
+/**
+ * asd_get_attached_sas_addr -- extract/generate attached SAS address
+ * @phy: pointer to asd_phy
+ * @sas_addr: pointer to buffer where the SAS address is to be written
+ *
+ * This function extracts the SAS address from an IDENTIFY frame
+ * received. If OOB is SATA, then a SAS address is generated from the
+ * HA tables.
+ *
+ * LOCKING: the frame_rcvd_lock needs to be held since this parses the frame
+ * buffer.
+ */
+static void pm8001_get_attached_sas_addr(struct pm8001_phy *phy,
+ u8 *sas_addr)
+{
+ if (phy->sas_phy.frame_rcvd[0] == 0x34
+ && phy->sas_phy.oob_mode == SATA_OOB_MODE) {
+ struct pm8001_hba_info *pm8001_ha = phy->sas_phy.ha->lldd_ha;
+ /* FIS device-to-host */
+ u64 addr = be64_to_cpu(*(__be64 *)pm8001_ha->sas_addr);
+ addr += phy->sas_phy.id;
+ *(__be64 *)sas_addr = cpu_to_be64(addr);
+ } else {
+ struct sas_identify_frame *idframe =
+ (void *) phy->sas_phy.frame_rcvd;
+ memcpy(sas_addr, idframe->sas_addr, SAS_ADDR_SIZE);
+ }
+}
+
+/**
+ * pm8001_hw_event_ack_req- For PM8001,some events need to acknowage to FW.
+ * @pm8001_ha: our hba card information
+ * @Qnum: the outbound queue message number.
+ * @SEA: source of event to ack
+ * @port_id: port id.
+ * @phyId: phy id.
+ * @param0: parameter 0.
+ * @param1: parameter 1.
+ */
+static void pm8001_hw_event_ack_req(struct pm8001_hba_info *pm8001_ha,
+ u32 Qnum, u32 SEA, u32 port_id, u32 phyId, u32 param0, u32 param1)
+{
+ struct hw_event_ack_req payload;
+ u32 opc = OPC_INB_SAS_HW_EVENT_ACK;
+
+ struct inbound_queue_table *circularQ;
+
+ memset((u8 *)&payload, 0, sizeof(payload));
+ circularQ = &pm8001_ha->inbnd_q_tbl[Qnum];
+ payload.tag = 1;
+ payload.sea_phyid_portid = cpu_to_le32(((SEA & 0xFFFF) << 8) |
+ ((phyId & 0x0F) << 4) | (port_id & 0x0F));
+ payload.param0 = cpu_to_le32(param0);
+ payload.param1 = cpu_to_le32(param1);
+ mpi_build_cmd(pm8001_ha, circularQ, opc, &payload);
+}
+
+static int pm8001_chip_phy_ctl_req(struct pm8001_hba_info *pm8001_ha,
+ u32 phyId, u32 phy_op);
+
+/**
+ * hw_event_sas_phy_up -FW tells me a SAS phy up event.
+ * @pm8001_ha: our hba card information
+ * @piomb: IO message buffer
+ */
+static void
+hw_event_sas_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+ struct hw_event_resp *pPayload =
+ (struct hw_event_resp *)(piomb + 4);
+ u32 lr_evt_status_phyid_portid =
+ le32_to_cpu(pPayload->lr_evt_status_phyid_portid);
+ u8 link_rate =
+ (u8)((lr_evt_status_phyid_portid & 0xF0000000) >> 28);
+ u8 phy_id =
+ (u8)((lr_evt_status_phyid_portid & 0x000000F0) >> 4);
+ struct sas_ha_struct *sas_ha = pm8001_ha->sas;
+ struct pm8001_phy *phy = &pm8001_ha->phy[phy_id];
+ unsigned long flags;
+ u8 deviceType = pPayload->sas_identify.dev_type;
+
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("HW_EVENT_SAS_PHY_UP \n"));
+
+ switch (deviceType) {
+ case SAS_PHY_UNUSED:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("device type no device.\n"));
+ break;
+ case SAS_END_DEVICE:
+ PM8001_MSG_DBG(pm8001_ha, pm8001_printk("end device.\n"));
+ pm8001_chip_phy_ctl_req(pm8001_ha, phy_id,
+ PHY_NOTIFY_ENABLE_SPINUP);
+ get_lrate_mode(phy, link_rate);
+ break;
+ case SAS_EDGE_EXPANDER_DEVICE:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("expander device.\n"));
+ get_lrate_mode(phy, link_rate);
+ break;
+ case SAS_FANOUT_EXPANDER_DEVICE:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("fanout expander device.\n"));
+ get_lrate_mode(phy, link_rate);
+ break;
+ default:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("unkown device type(%x)\n", deviceType));
+ break;
+ }
+ phy->phy_type |= PORT_TYPE_SAS;
+ phy->identify.device_type = deviceType;
+ phy->phy_attached = 1;
+ if (phy->identify.device_type == SAS_END_DEV)
+ phy->identify.target_port_protocols = SAS_PROTOCOL_SSP;
+ else if (phy->identify.device_type != NO_DEVICE)
+ phy->identify.target_port_protocols = SAS_PROTOCOL_SMP;
+ phy->sas_phy.oob_mode = SAS_OOB_MODE;
+ sas_ha->notify_phy_event(&phy->sas_phy, PHYE_OOB_DONE);
+ spin_lock_irqsave(&phy->sas_phy.frame_rcvd_lock, flags);
+ memcpy(phy->frame_rcvd, &pPayload->sas_identify,
+ sizeof(struct sas_identify_frame)-4);
+ phy->frame_rcvd_size = sizeof(struct sas_identify_frame) - 4;
+ pm8001_get_attached_sas_addr(phy, phy->sas_phy.attached_sas_addr);
+ spin_unlock_irqrestore(&phy->sas_phy.frame_rcvd_lock, flags);
+ if (pm8001_ha->flags == PM8001F_RUN_TIME)
+ mdelay(200);/*delay a moment to wait disk to spinup*/
+ pm8001_bytes_dmaed(pm8001_ha, phy_id);
+}
+
+/**
+ * hw_event_sata_phy_up -FW tells me a SATA phy up event.
+ * @pm8001_ha: our hba card information
+ * @piomb: IO message buffer
+ */
+static void
+hw_event_sata_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+ struct hw_event_resp *pPayload =
+ (struct hw_event_resp *)(piomb + 4);
+ u32 lr_evt_status_phyid_portid =
+ le32_to_cpu(pPayload->lr_evt_status_phyid_portid);
+ u8 link_rate =
+ (u8)((lr_evt_status_phyid_portid & 0xF0000000) >> 28);
+ u8 phy_id =
+ (u8)((lr_evt_status_phyid_portid & 0x000000F0) >> 4);
+ struct sas_ha_struct *sas_ha = pm8001_ha->sas;
+ struct pm8001_phy *phy = &pm8001_ha->phy[phy_id];
+ unsigned long flags;
+ get_lrate_mode(phy, link_rate);
+ phy->phy_type |= PORT_TYPE_SATA;
+ phy->phy_attached = 1;
+ phy->sas_phy.oob_mode = SATA_OOB_MODE;
+ sas_ha->notify_phy_event(&phy->sas_phy, PHYE_OOB_DONE);
+ spin_lock_irqsave(&phy->sas_phy.frame_rcvd_lock, flags);
+ memcpy(phy->frame_rcvd, ((u8 *)&pPayload->sata_fis - 4),
+ sizeof(struct dev_to_host_fis));
+ phy->frame_rcvd_size = sizeof(struct dev_to_host_fis);
+ phy->identify.target_port_protocols = SAS_PROTOCOL_SATA;
+ phy->identify.device_type = SATA_DEV;
+ pm8001_get_attached_sas_addr(phy, phy->sas_phy.attached_sas_addr);
+ spin_unlock_irqrestore(&phy->sas_phy.frame_rcvd_lock, flags);
+ pm8001_bytes_dmaed(pm8001_ha, phy_id);
+}
+
+/**
+ * hw_event_phy_down -we should notify the libsas the phy is down.
+ * @pm8001_ha: our hba card information
+ * @piomb: IO message buffer
+ */
+static void
+hw_event_phy_down(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+ struct hw_event_resp *pPayload =
+ (struct hw_event_resp *)(piomb + 4);
+ u32 lr_evt_status_phyid_portid =
+ le32_to_cpu(pPayload->lr_evt_status_phyid_portid);
+ u8 port_id = (u8)(lr_evt_status_phyid_portid & 0x0000000F);
+ u8 phy_id =
+ (u8)((lr_evt_status_phyid_portid & 0x000000F0) >> 4);
+ u32 npip_portstate = le32_to_cpu(pPayload->npip_portstate);
+ u8 portstate = (u8)(npip_portstate & 0x0000000F);
+
+ switch (portstate) {
+ case PORT_VALID:
+ break;
+ case PORT_INVALID:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk(" PortInvalid portID %d \n", port_id));
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk(" Last phy Down and port invalid\n"));
+ pm8001_hw_event_ack_req(pm8001_ha, 0, HW_EVENT_PHY_DOWN,
+ port_id, phy_id, 0, 0);
+ break;
+ case PORT_IN_RESET:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk(" PortInReset portID %d \n", port_id));
+ break;
+ case PORT_NOT_ESTABLISHED:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk(" phy Down and PORT_NOT_ESTABLISHED\n"));
+ break;
+ case PORT_LOSTCOMM:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk(" phy Down and PORT_LOSTCOMM\n"));
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk(" Last phy Down and port invalid\n"));
+ pm8001_hw_event_ack_req(pm8001_ha, 0, HW_EVENT_PHY_DOWN,
+ port_id, phy_id, 0, 0);
+ break;
+ default:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk(" phy Down and(default) = %x\n",
+ portstate));
+ break;
+
+ }
+}
+
+/**
+ * mpi_reg_resp -process register device ID response.
+ * @pm8001_ha: our hba card information
+ * @piomb: IO message buffer
+ *
+ * when sas layer find a device it will notify LLDD, then the driver register
+ * the domain device to FW, this event is the return device ID which the FW
+ * has assigned, from now,inter-communication with FW is no longer using the
+ * SAS address, use device ID which FW assigned.
+ */
+static int mpi_reg_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+ u32 status;
+ u32 device_id;
+ u32 htag;
+ struct pm8001_ccb_info *ccb;
+ struct pm8001_device *pm8001_dev;
+ struct dev_reg_resp *registerRespPayload =
+ (struct dev_reg_resp *)(piomb + 4);
+
+ htag = le32_to_cpu(registerRespPayload->tag);
+ ccb = &pm8001_ha->ccb_info[registerRespPayload->tag];
+ pm8001_dev = ccb->device;
+ status = le32_to_cpu(registerRespPayload->status);
+ device_id = le32_to_cpu(registerRespPayload->device_id);
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk(" register device is status = %d\n", status));
+ switch (status) {
+ case DEVREG_SUCCESS:
+ PM8001_MSG_DBG(pm8001_ha, pm8001_printk("DEVREG_SUCCESS\n"));
+ pm8001_dev->device_id = device_id;
+ break;
+ case DEVREG_FAILURE_OUT_OF_RESOURCE:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("DEVREG_FAILURE_OUT_OF_RESOURCE\n"));
+ break;
+ case DEVREG_FAILURE_DEVICE_ALREADY_REGISTERED:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("DEVREG_FAILURE_DEVICE_ALREADY_REGISTERED\n"));
+ break;
+ case DEVREG_FAILURE_INVALID_PHY_ID:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("DEVREG_FAILURE_INVALID_PHY_ID\n"));
+ break;
+ case DEVREG_FAILURE_PHY_ID_ALREADY_REGISTERED:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("DEVREG_FAILURE_PHY_ID_ALREADY_REGISTERED\n"));
+ break;
+ case DEVREG_FAILURE_PORT_ID_OUT_OF_RANGE:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("DEVREG_FAILURE_PORT_ID_OUT_OF_RANGE\n"));
+ break;
+ case DEVREG_FAILURE_PORT_NOT_VALID_STATE:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("DEVREG_FAILURE_PORT_NOT_VALID_STATE\n"));
+ break;
+ case DEVREG_FAILURE_DEVICE_TYPE_NOT_VALID:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("DEVREG_FAILURE_DEVICE_TYPE_NOT_VALID\n"));
+ break;
+ default:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("DEVREG_FAILURE_DEVICE_TYPE_NOT_UNSORPORTED\n"));
+ break;
+ }
+ complete(pm8001_dev->dcompletion);
+ ccb->task = NULL;
+ ccb->ccb_tag = 0xFFFFFFFF;
+ pm8001_ccb_free(pm8001_ha, htag);
+ return 0;
+}
+
+static int mpi_dereg_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+ u32 status;
+ u32 device_id;
+ struct dev_reg_resp *registerRespPayload =
+ (struct dev_reg_resp *)(piomb + 4);
+
+ status = le32_to_cpu(registerRespPayload->status);
+ device_id = le32_to_cpu(registerRespPayload->device_id);
+ if (status != 0)
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk(" deregister device failed ,status = %x"
+ ", device_id = %x\n", status, device_id));
+ return 0;
+}
+
+static int
+mpi_fw_flash_update_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+ u32 status;
+ struct fw_control_ex fw_control_context;
+ struct fw_flash_Update_resp *ppayload =
+ (struct fw_flash_Update_resp *)(piomb + 4);
+ u32 tag = le32_to_cpu(ppayload->tag);
+ struct pm8001_ccb_info *ccb = &pm8001_ha->ccb_info[tag];
+ status = le32_to_cpu(ppayload->status);
+ memcpy(&fw_control_context,
+ ccb->fw_control_context,
+ sizeof(fw_control_context));
+ switch (status) {
+ case FLASH_UPDATE_COMPLETE_PENDING_REBOOT:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk(": FLASH_UPDATE_COMPLETE_PENDING_REBOOT\n"));
+ break;
+ case FLASH_UPDATE_IN_PROGRESS:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk(": FLASH_UPDATE_IN_PROGRESS\n"));
+ break;
+ case FLASH_UPDATE_HDR_ERR:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk(": FLASH_UPDATE_HDR_ERR\n"));
+ break;
+ case FLASH_UPDATE_OFFSET_ERR:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk(": FLASH_UPDATE_OFFSET_ERR\n"));
+ break;
+ case FLASH_UPDATE_CRC_ERR:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk(": FLASH_UPDATE_CRC_ERR\n"));
+ break;
+ case FLASH_UPDATE_LENGTH_ERR:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk(": FLASH_UPDATE_LENGTH_ERR\n"));
+ break;
+ case FLASH_UPDATE_HW_ERR:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk(": FLASH_UPDATE_HW_ERR\n"));
+ break;
+ case FLASH_UPDATE_DNLD_NOT_SUPPORTED:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk(": FLASH_UPDATE_DNLD_NOT_SUPPORTED\n"));
+ break;
+ case FLASH_UPDATE_DISABLED:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk(": FLASH_UPDATE_DISABLED\n"));
+ break;
+ default:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("No matched status = %d\n", status));
+ break;
+ }
+ ccb->fw_control_context->fw_control->retcode = status;
+ pci_free_consistent(pm8001_ha->pdev,
+ fw_control_context.len,
+ fw_control_context.virtAddr,
+ fw_control_context.phys_addr);
+ complete(pm8001_ha->nvmd_completion);
+ ccb->task = NULL;
+ ccb->ccb_tag = 0xFFFFFFFF;
+ pm8001_ccb_free(pm8001_ha, tag);
+ return 0;
+}
+
+static int
+mpi_general_event(struct pm8001_hba_info *pm8001_ha , void *piomb)
+{
+ u32 status;
+ int i;
+ struct general_event_resp *pPayload =
+ (struct general_event_resp *)(piomb + 4);
+ status = le32_to_cpu(pPayload->status);
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk(" status = 0x%x\n", status));
+ for (i = 0; i < GENERAL_EVENT_PAYLOAD; i++)
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("inb_IOMB_payload[0x%x] 0x%x, \n", i,
+ pPayload->inb_IOMB_payload[i]));
+ return 0;
+}
+
+static int
+mpi_task_abort_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+ struct sas_task *t;
+ struct pm8001_ccb_info *ccb;
+ unsigned long flags;
+ u32 status ;
+ u32 tag, scp;
+ struct task_status_struct *ts;
+
+ struct task_abort_resp *pPayload =
+ (struct task_abort_resp *)(piomb + 4);
+ ccb = &pm8001_ha->ccb_info[pPayload->tag];
+ t = ccb->task;
+
+
+ status = le32_to_cpu(pPayload->status);
+ tag = le32_to_cpu(pPayload->tag);
+ scp = le32_to_cpu(pPayload->scp);
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk(" status = 0x%x\n", status));
+ if (t == NULL)
+ return -1;
+ ts = &t->task_status;
+ if (status != 0)
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("task abort failed status 0x%x ,"
+ "tag = 0x%x, scp= 0x%x\n", status, tag, scp));
+ switch (status) {
+ case IO_SUCCESS:
+ PM8001_EH_DBG(pm8001_ha, pm8001_printk("IO_SUCCESS\n"));
+ ts->resp = SAS_TASK_COMPLETE;
+ ts->stat = SAM_GOOD;
+ break;
+ case IO_NOT_VALID:
+ PM8001_EH_DBG(pm8001_ha, pm8001_printk("IO_NOT_VALID\n"));
+ ts->resp = TMF_RESP_FUNC_FAILED;
+ break;
+ }
+ spin_lock_irqsave(&t->task_state_lock, flags);
+ t->task_state_flags &= ~SAS_TASK_STATE_PENDING;
+ t->task_state_flags &= ~SAS_TASK_AT_INITIATOR;
+ t->task_state_flags |= SAS_TASK_STATE_DONE;
+ spin_unlock_irqrestore(&t->task_state_lock, flags);
+ pm8001_ccb_task_free(pm8001_ha, t, ccb, pPayload->tag);
+ mb();
+ t->task_done(t);
+ return 0;
+}
+
+/**
+ * mpi_hw_event -The hw event has come.
+ * @pm8001_ha: our hba card information
+ * @piomb: IO message buffer
+ */
+static int mpi_hw_event(struct pm8001_hba_info *pm8001_ha, void* piomb)
+{
+ unsigned long flags;
+ struct hw_event_resp *pPayload =
+ (struct hw_event_resp *)(piomb + 4);
+ u32 lr_evt_status_phyid_portid =
+ le32_to_cpu(pPayload->lr_evt_status_phyid_portid);
+ u8 port_id = (u8)(lr_evt_status_phyid_portid & 0x0000000F);
+ u8 phy_id =
+ (u8)((lr_evt_status_phyid_portid & 0x000000F0) >> 4);
+ u16 eventType =
+ (u16)((lr_evt_status_phyid_portid & 0x00FFFF00) >> 8);
+ u8 status =
+ (u8)((lr_evt_status_phyid_portid & 0x0F000000) >> 24);
+ struct sas_ha_struct *sas_ha = pm8001_ha->sas;
+ struct pm8001_phy *phy = &pm8001_ha->phy[phy_id];
+ struct asd_sas_phy *sas_phy = sas_ha->sas_phy[phy_id];
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("outbound queue HW event & event type : "));
+ switch (eventType) {
+ case HW_EVENT_PHY_START_STATUS:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("HW_EVENT_PHY_START_STATUS"
+ " status = %x\n", status));
+ if (status == 0) {
+ phy->phy_state = 1;
+ if (pm8001_ha->flags == PM8001F_RUN_TIME)
+ complete(phy->enable_completion);
+ }
+ break;
+ case HW_EVENT_SAS_PHY_UP:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("HW_EVENT_PHY_START_STATUS \n"));
+ hw_event_sas_phy_up(pm8001_ha, piomb);
+ break;
+ case HW_EVENT_SATA_PHY_UP:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("HW_EVENT_SATA_PHY_UP \n"));
+ hw_event_sata_phy_up(pm8001_ha, piomb);
+ break;
+ case HW_EVENT_PHY_STOP_STATUS:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("HW_EVENT_PHY_STOP_STATUS "
+ "status = %x\n", status));
+ if (status == 0)
+ phy->phy_state = 0;
+ break;
+ case HW_EVENT_SATA_SPINUP_HOLD:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("HW_EVENT_SATA_SPINUP_HOLD \n"));
+ sas_ha->notify_phy_event(&phy->sas_phy, PHYE_SPINUP_HOLD);
+ break;
+ case HW_EVENT_PHY_DOWN:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("HW_EVENT_PHY_DOWN \n"));
+ sas_ha->notify_phy_event(&phy->sas_phy, PHYE_LOSS_OF_SIGNAL);
+ phy->phy_attached = 0;
+ phy->phy_state = 0;
+ hw_event_phy_down(pm8001_ha, piomb);
+ break;
+ case HW_EVENT_PORT_INVALID:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("HW_EVENT_PORT_INVALID\n"));
+ sas_phy_disconnected(sas_phy);
+ phy->phy_attached = 0;
+ sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
+ break;
+ /* the broadcast change primitive received, tell the LIBSAS this event
+ to revalidate the sas domain*/
+ case HW_EVENT_BROADCAST_CHANGE:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("HW_EVENT_BROADCAST_CHANGE\n"));
+ pm8001_hw_event_ack_req(pm8001_ha, 0, HW_EVENT_BROADCAST_CHANGE,
+ port_id, phy_id, 1, 0);
+ spin_lock_irqsave(&sas_phy->sas_prim_lock, flags);
+ sas_phy->sas_prim = HW_EVENT_BROADCAST_CHANGE;
+ spin_unlock_irqrestore(&sas_phy->sas_prim_lock, flags);
+ sas_ha->notify_port_event(sas_phy, PORTE_BROADCAST_RCVD);
+ break;
+ case HW_EVENT_PHY_ERROR:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("HW_EVENT_PHY_ERROR\n"));
+ sas_phy_disconnected(&phy->sas_phy);
+ phy->phy_attached = 0;
+ sas_ha->notify_phy_event(&phy->sas_phy, PHYE_OOB_ERROR);
+ break;
+ case HW_EVENT_BROADCAST_EXP:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("HW_EVENT_BROADCAST_EXP\n"));
+ spin_lock_irqsave(&sas_phy->sas_prim_lock, flags);
+ sas_phy->sas_prim = HW_EVENT_BROADCAST_EXP;
+ spin_unlock_irqrestore(&sas_phy->sas_prim_lock, flags);
+ sas_ha->notify_port_event(sas_phy, PORTE_BROADCAST_RCVD);
+ break;
+ case HW_EVENT_LINK_ERR_INVALID_DWORD:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("HW_EVENT_LINK_ERR_INVALID_DWORD\n"));
+ pm8001_hw_event_ack_req(pm8001_ha, 0,
+ HW_EVENT_LINK_ERR_INVALID_DWORD, port_id, phy_id, 0, 0);
+ sas_phy_disconnected(sas_phy);
+ phy->phy_attached = 0;
+ sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
+ break;
+ case HW_EVENT_LINK_ERR_DISPARITY_ERROR:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("HW_EVENT_LINK_ERR_DISPARITY_ERROR\n"));
+ pm8001_hw_event_ack_req(pm8001_ha, 0,
+ HW_EVENT_LINK_ERR_DISPARITY_ERROR,
+ port_id, phy_id, 0, 0);
+ sas_phy_disconnected(sas_phy);
+ phy->phy_attached = 0;
+ sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
+ break;
+ case HW_EVENT_LINK_ERR_CODE_VIOLATION:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("HW_EVENT_LINK_ERR_CODE_VIOLATION\n"));
+ pm8001_hw_event_ack_req(pm8001_ha, 0,
+ HW_EVENT_LINK_ERR_CODE_VIOLATION,
+ port_id, phy_id, 0, 0);
+ sas_phy_disconnected(sas_phy);
+ phy->phy_attached = 0;
+ sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
+ break;
+ case HW_EVENT_LINK_ERR_LOSS_OF_DWORD_SYNCH:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("HW_EVENT_LINK_ERR_LOSS_OF_DWORD_SYNCH\n"));
+ pm8001_hw_event_ack_req(pm8001_ha, 0,
+ HW_EVENT_LINK_ERR_LOSS_OF_DWORD_SYNCH,
+ port_id, phy_id, 0, 0);
+ sas_phy_disconnected(sas_phy);
+ phy->phy_attached = 0;
+ sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
+ break;
+ case HW_EVENT_MALFUNCTION:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("HW_EVENT_MALFUNCTION\n"));
+ break;
+ case HW_EVENT_BROADCAST_SES:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("HW_EVENT_BROADCAST_SES\n"));
+ spin_lock_irqsave(&sas_phy->sas_prim_lock, flags);
+ sas_phy->sas_prim = HW_EVENT_BROADCAST_SES;
+ spin_unlock_irqrestore(&sas_phy->sas_prim_lock, flags);
+ sas_ha->notify_port_event(sas_phy, PORTE_BROADCAST_RCVD);
+ break;
+ case HW_EVENT_INBOUND_CRC_ERROR:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("HW_EVENT_INBOUND_CRC_ERROR\n"));
+ pm8001_hw_event_ack_req(pm8001_ha, 0,
+ HW_EVENT_INBOUND_CRC_ERROR,
+ port_id, phy_id, 0, 0);
+ break;
+ case HW_EVENT_HARD_RESET_RECEIVED:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("HW_EVENT_HARD_RESET_RECEIVED\n"));
+ sas_ha->notify_port_event(sas_phy, PORTE_HARD_RESET);
+ break;
+ case HW_EVENT_ID_FRAME_TIMEOUT:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("HW_EVENT_ID_FRAME_TIMEOUT\n"));
+ sas_phy_disconnected(sas_phy);
+ phy->phy_attached = 0;
+ sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
+ break;
+ case HW_EVENT_LINK_ERR_PHY_RESET_FAILED:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("HW_EVENT_LINK_ERR_PHY_RESET_FAILED \n"));
+ pm8001_hw_event_ack_req(pm8001_ha, 0,
+ HW_EVENT_LINK_ERR_PHY_RESET_FAILED,
+ port_id, phy_id, 0, 0);
+ sas_phy_disconnected(sas_phy);
+ phy->phy_attached = 0;
+ sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
+ break;
+ case HW_EVENT_PORT_RESET_TIMER_TMO:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("HW_EVENT_PORT_RESET_TIMER_TMO \n"));
+ sas_phy_disconnected(sas_phy);
+ phy->phy_attached = 0;
+ sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
+ break;
+ case HW_EVENT_PORT_RECOVERY_TIMER_TMO:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("HW_EVENT_PORT_RECOVERY_TIMER_TMO \n"));
+ sas_phy_disconnected(sas_phy);
+ phy->phy_attached = 0;
+ sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
+ break;
+ case HW_EVENT_PORT_RECOVER:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("HW_EVENT_PORT_RECOVER \n"));
+ break;
+ case HW_EVENT_PORT_RESET_COMPLETE:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("HW_EVENT_PORT_RESET_COMPLETE \n"));
+ break;
+ case EVENT_BROADCAST_ASYNCH_EVENT:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("EVENT_BROADCAST_ASYNCH_EVENT\n"));
+ break;
+ default:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("Unknown event type = %x\n", eventType));
+ break;
+ }
+ return 0;
+}
+
+/**
+ * process_one_iomb - process one outbound Queue memory block
+ * @pm8001_ha: our hba card information
+ * @piomb: IO message buffer
+ */
+static void process_one_iomb(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+ u32 pHeader = (u32)*(u32 *)piomb;
+ u8 opc = (u8)((le32_to_cpu(pHeader)) & 0xFFF);
+
+ PM8001_MSG_DBG(pm8001_ha, pm8001_printk("process_one_iomb:"));
+
+ switch (opc) {
+ case OPC_OUB_ECHO:
+ PM8001_MSG_DBG(pm8001_ha, pm8001_printk("OPC_OUB_ECHO \n"));
+ break;
+ case OPC_OUB_HW_EVENT:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("OPC_OUB_HW_EVENT \n"));
+ mpi_hw_event(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_SSP_COMP:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("OPC_OUB_SSP_COMP \n"));
+ mpi_ssp_completion(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_SMP_COMP:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("OPC_OUB_SMP_COMP \n"));
+ mpi_smp_completion(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_LOCAL_PHY_CNTRL:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("OPC_OUB_LOCAL_PHY_CNTRL\n"));
+ mpi_local_phy_ctl(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_DEV_REGIST:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("OPC_OUB_DEV_REGIST \n"));
+ mpi_reg_resp(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_DEREG_DEV:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("unresgister the deviece \n"));
+ mpi_dereg_resp(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_GET_DEV_HANDLE:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("OPC_OUB_GET_DEV_HANDLE \n"));
+ break;
+ case OPC_OUB_SATA_COMP:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("OPC_OUB_SATA_COMP \n"));
+ mpi_sata_completion(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_SATA_EVENT:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("OPC_OUB_SATA_EVENT \n"));
+ mpi_sata_event(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_SSP_EVENT:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("OPC_OUB_SSP_EVENT\n"));
+ mpi_ssp_event(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_DEV_HANDLE_ARRIV:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("OPC_OUB_DEV_HANDLE_ARRIV\n"));
+ /*This is for target*/
+ break;
+ case OPC_OUB_SSP_RECV_EVENT:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("OPC_OUB_SSP_RECV_EVENT\n"));
+ /*This is for target*/
+ break;
+ case OPC_OUB_DEV_INFO:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("OPC_OUB_DEV_INFO\n"));
+ break;
+ case OPC_OUB_FW_FLASH_UPDATE:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("OPC_OUB_FW_FLASH_UPDATE\n"));
+ mpi_fw_flash_update_resp(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_GPIO_RESPONSE:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("OPC_OUB_GPIO_RESPONSE\n"));
+ break;
+ case OPC_OUB_GPIO_EVENT:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("OPC_OUB_GPIO_EVENT\n"));
+ break;
+ case OPC_OUB_GENERAL_EVENT:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("OPC_OUB_GENERAL_EVENT\n"));
+ mpi_general_event(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_SSP_ABORT_RSP:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("OPC_OUB_SSP_ABORT_RSP\n"));
+ mpi_task_abort_resp(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_SATA_ABORT_RSP:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("OPC_OUB_SATA_ABORT_RSP\n"));
+ mpi_task_abort_resp(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_SAS_DIAG_MODE_START_END:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("OPC_OUB_SAS_DIAG_MODE_START_END\n"));
+ break;
+ case OPC_OUB_SAS_DIAG_EXECUTE:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("OPC_OUB_SAS_DIAG_EXECUTE\n"));
+ break;
+ case OPC_OUB_GET_TIME_STAMP:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("OPC_OUB_GET_TIME_STAMP\n"));
+ break;
+ case OPC_OUB_SAS_HW_EVENT_ACK:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("OPC_OUB_SAS_HW_EVENT_ACK\n"));
+ break;
+ case OPC_OUB_PORT_CONTROL:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("OPC_OUB_PORT_CONTROL\n"));
+ break;
+ case OPC_OUB_SMP_ABORT_RSP:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("OPC_OUB_SMP_ABORT_RSP\n"));
+ mpi_task_abort_resp(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_GET_NVMD_DATA:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("OPC_OUB_GET_NVMD_DATA\n"));
+ mpi_get_nvmd_resp(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_SET_NVMD_DATA:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("OPC_OUB_SET_NVMD_DATA\n"));
+ mpi_set_nvmd_resp(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_DEVICE_HANDLE_REMOVAL:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("OPC_OUB_DEVICE_HANDLE_REMOVAL\n"));
+ break;
+ case OPC_OUB_SET_DEVICE_STATE:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("OPC_OUB_SET_DEVICE_STATE\n"));
+ mpi_set_dev_state_resp(pm8001_ha, piomb);
+ break;
+ case OPC_OUB_GET_DEVICE_STATE:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("OPC_OUB_GET_DEVICE_STATE\n"));
+ break;
+ case OPC_OUB_SET_DEV_INFO:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("OPC_OUB_SET_DEV_INFO\n"));
+ break;
+ case OPC_OUB_SAS_RE_INITIALIZE:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("OPC_OUB_SAS_RE_INITIALIZE\n"));
+ break;
+ default:
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("Unknown outbound Queue IOMB OPC = %x\n",
+ opc));
+ break;
+ }
+}
+
+static int process_oq(struct pm8001_hba_info *pm8001_ha)
+{
+ struct outbound_queue_table *circularQ;
+ void *pMsg1 = NULL;
+ u8 bc = 0;
+ u32 ret = MPI_IO_STATUS_FAIL;
+
+ circularQ = &pm8001_ha->outbnd_q_tbl[0];
+ do {
+ ret = mpi_msg_consume(pm8001_ha, circularQ, &pMsg1, &bc);
+ if (MPI_IO_STATUS_SUCCESS == ret) {
+ /* process the outbound message */
+ process_one_iomb(pm8001_ha, (void *)(pMsg1 - 4));
+ /* free the message from the outbound circular buffer */
+ mpi_msg_free_set(pm8001_ha, pMsg1, circularQ, bc);
+ }
+ if (MPI_IO_STATUS_BUSY == ret) {
+ u32 producer_idx;
+ /* Update the producer index from SPC */
+ producer_idx = pm8001_read_32(circularQ->pi_virt);
+ circularQ->producer_index = cpu_to_le32(producer_idx);
+ if (circularQ->producer_index ==
+ circularQ->consumer_idx)
+ /* OQ is empty */
+ break;
+ }
+ } while (1);
+ return ret;
+}
+
+/* PCI_DMA_... to our direction translation. */
+static const u8 data_dir_flags[] = {
+ [PCI_DMA_BIDIRECTIONAL] = DATA_DIR_BYRECIPIENT,/* UNSPECIFIED */
+ [PCI_DMA_TODEVICE] = DATA_DIR_OUT,/* OUTBOUND */
+ [PCI_DMA_FROMDEVICE] = DATA_DIR_IN,/* INBOUND */
+ [PCI_DMA_NONE] = DATA_DIR_NONE,/* NO TRANSFER */
+};
+static void
+pm8001_chip_make_sg(struct scatterlist *scatter, int nr, void *prd)
+{
+ int i;
+ struct scatterlist *sg;
+ struct pm8001_prd *buf_prd = prd;
+
+ for_each_sg(scatter, sg, nr, i) {
+ buf_prd->addr = cpu_to_le64(sg_dma_address(sg));
+ buf_prd->im_len.len = cpu_to_le32(sg_dma_len(sg));
+ buf_prd->im_len.e = 0;
+ buf_prd++;
+ }
+}
+
+static void build_smp_cmd(u32 deviceID, u32 hTag, struct smp_req *psmp_cmd)
+{
+ psmp_cmd->tag = cpu_to_le32(hTag);
+ psmp_cmd->device_id = cpu_to_le32(deviceID);
+ psmp_cmd->len_ip_ir = cpu_to_le32(1|(1 << 1));
+}
+
+/**
+ * pm8001_chip_smp_req - send a SMP task to FW
+ * @pm8001_ha: our hba card information.
+ * @ccb: the ccb information this request used.
+ */
+static int pm8001_chip_smp_req(struct pm8001_hba_info *pm8001_ha,
+ struct pm8001_ccb_info *ccb)
+{
+ int elem, rc;
+ struct sas_task *task = ccb->task;
+ struct domain_device *dev = task->dev;
+ struct pm8001_device *pm8001_dev = dev->lldd_dev;
+ struct scatterlist *sg_req, *sg_resp;
+ u32 req_len, resp_len;
+ struct smp_req smp_cmd;
+ u32 opc;
+ struct inbound_queue_table *circularQ;
+
+ memset(&smp_cmd, 0, sizeof(smp_cmd));
+ /*
+ * DMA-map SMP request, response buffers
+ */
+ sg_req = &task->smp_task.smp_req;
+ elem = dma_map_sg(pm8001_ha->dev, sg_req, 1, PCI_DMA_TODEVICE);
+ if (!elem)
+ return -ENOMEM;
+ req_len = sg_dma_len(sg_req);
+
+ sg_resp = &task->smp_task.smp_resp;
+ elem = dma_map_sg(pm8001_ha->dev, sg_resp, 1, PCI_DMA_FROMDEVICE);
+ if (!elem) {
+ rc = -ENOMEM;
+ goto err_out;
+ }
+ resp_len = sg_dma_len(sg_resp);
+ /* must be in dwords */
+ if ((req_len & 0x3) || (resp_len & 0x3)) {
+ rc = -EINVAL;
+ goto err_out_2;
+ }
+
+ opc = OPC_INB_SMP_REQUEST;
+ circularQ = &pm8001_ha->inbnd_q_tbl[0];
+ smp_cmd.tag = cpu_to_le32(ccb->ccb_tag);
+ smp_cmd.long_smp_req.long_req_addr =
+ cpu_to_le64((u64)sg_dma_address(&task->smp_task.smp_req));
+ smp_cmd.long_smp_req.long_req_size =
+ cpu_to_le32((u32)sg_dma_len(&task->smp_task.smp_req)-4);
+ smp_cmd.long_smp_req.long_resp_addr =
+ cpu_to_le64((u64)sg_dma_address(&task->smp_task.smp_resp));
+ smp_cmd.long_smp_req.long_resp_size =
+ cpu_to_le32((u32)sg_dma_len(&task->smp_task.smp_resp)-4);
+ build_smp_cmd(pm8001_dev->device_id, smp_cmd.tag, &smp_cmd);
+ mpi_build_cmd(pm8001_ha, circularQ, opc, (u32 *)&smp_cmd);
+ return 0;
+
+err_out_2:
+ dma_unmap_sg(pm8001_ha->dev, &ccb->task->smp_task.smp_resp, 1,
+ PCI_DMA_FROMDEVICE);
+err_out:
+ dma_unmap_sg(pm8001_ha->dev, &ccb->task->smp_task.smp_req, 1,
+ PCI_DMA_TODEVICE);
+ return rc;
+}
+
+/**
+ * pm8001_chip_ssp_io_req - send a SSP task to FW
+ * @pm8001_ha: our hba card information.
+ * @ccb: the ccb information this request used.
+ */
+static int pm8001_chip_ssp_io_req(struct pm8001_hba_info *pm8001_ha,
+ struct pm8001_ccb_info *ccb)
+{
+ struct sas_task *task = ccb->task;
+ struct domain_device *dev = task->dev;
+ struct pm8001_device *pm8001_dev = dev->lldd_dev;
+ struct ssp_ini_io_start_req ssp_cmd;
+ u32 tag = ccb->ccb_tag;
+ int ret;
+ __le64 phys_addr;
+ struct inbound_queue_table *circularQ;
+ u32 opc = OPC_INB_SSPINIIOSTART;
+ memset(&ssp_cmd, 0, sizeof(ssp_cmd));
+ memcpy(ssp_cmd.ssp_iu.lun, task->ssp_task.LUN, 8);
+ ssp_cmd.dir_m_tlr = data_dir_flags[task->data_dir] << 8 | 0x0;/*0 for
+ SAS 1.1 compatible TLR*/
+ ssp_cmd.data_len = cpu_to_le32(task->total_xfer_len);
+ ssp_cmd.device_id = cpu_to_le32(pm8001_dev->device_id);
+ ssp_cmd.tag = cpu_to_le32(tag);
+ if (task->ssp_task.enable_first_burst)
+ ssp_cmd.ssp_iu.efb_prio_attr |= 0x80;
+ ssp_cmd.ssp_iu.efb_prio_attr |= (task->ssp_task.task_prio << 3);
+ ssp_cmd.ssp_iu.efb_prio_attr |= (task->ssp_task.task_attr & 7);
+ memcpy(ssp_cmd.ssp_iu.cdb, task->ssp_task.cdb, 16);
+ circularQ = &pm8001_ha->inbnd_q_tbl[0];
+
+ /* fill in PRD (scatter/gather) table, if any */
+ if (task->num_scatter > 1) {
+ pm8001_chip_make_sg(task->scatter, ccb->n_elem, ccb->buf_prd);
+ phys_addr = cpu_to_le64(ccb->ccb_dma_handle +
+ offsetof(struct pm8001_ccb_info, buf_prd[0]));
+ ssp_cmd.addr_low = lower_32_bits(phys_addr);
+ ssp_cmd.addr_high = upper_32_bits(phys_addr);
+ ssp_cmd.esgl = cpu_to_le32(1<<31);
+ } else if (task->num_scatter == 1) {
+ __le64 dma_addr = cpu_to_le64(sg_dma_address(task->scatter));
+ ssp_cmd.addr_low = lower_32_bits(dma_addr);
+ ssp_cmd.addr_high = upper_32_bits(dma_addr);
+ ssp_cmd.len = cpu_to_le32(task->total_xfer_len);
+ ssp_cmd.esgl = 0;
+ } else if (task->num_scatter == 0) {
+ ssp_cmd.addr_low = 0;
+ ssp_cmd.addr_high = 0;
+ ssp_cmd.len = cpu_to_le32(task->total_xfer_len);
+ ssp_cmd.esgl = 0;
+ }
+ ret = mpi_build_cmd(pm8001_ha, circularQ, opc, &ssp_cmd);
+ return ret;
+}
+
+static int pm8001_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
+ struct pm8001_ccb_info *ccb)
+{
+ struct sas_task *task = ccb->task;
+ struct domain_device *dev = task->dev;
+ struct pm8001_device *pm8001_ha_dev = dev->lldd_dev;
+ u32 tag = ccb->ccb_tag;
+ int ret;
+ struct sata_start_req sata_cmd;
+ u32 hdr_tag, ncg_tag = 0;
+ __le64 phys_addr;
+ u32 ATAP = 0x0;
+ u32 dir;
+ struct inbound_queue_table *circularQ;
+ u32 opc = OPC_INB_SATA_HOST_OPSTART;
+ memset(&sata_cmd, 0, sizeof(sata_cmd));
+ circularQ = &pm8001_ha->inbnd_q_tbl[0];
+ if (task->data_dir == PCI_DMA_NONE) {
+ ATAP = 0x04; /* no data*/
+ PM8001_IO_DBG(pm8001_ha, pm8001_printk("no data \n"));
+ } else if (likely(!task->ata_task.device_control_reg_update)) {
+ if (task->ata_task.dma_xfer) {
+ ATAP = 0x06; /* DMA */
+ PM8001_IO_DBG(pm8001_ha, pm8001_printk("DMA \n"));
+ } else {
+ ATAP = 0x05; /* PIO*/
+ PM8001_IO_DBG(pm8001_ha, pm8001_printk("PIO \n"));
+ }
+ if (task->ata_task.use_ncq &&
+ dev->sata_dev.command_set != ATAPI_COMMAND_SET) {
+ ATAP = 0x07; /* FPDMA */
+ PM8001_IO_DBG(pm8001_ha, pm8001_printk("FPDMA \n"));
+ }
+ }
+ if (task->ata_task.use_ncq && pm8001_get_ncq_tag(task, &hdr_tag))
+ ncg_tag = cpu_to_le32(hdr_tag);
+ dir = data_dir_flags[task->data_dir] << 8;
+ sata_cmd.tag = cpu_to_le32(tag);
+ sata_cmd.device_id = cpu_to_le32(pm8001_ha_dev->device_id);
+ sata_cmd.data_len = cpu_to_le32(task->total_xfer_len);
+ sata_cmd.ncqtag_atap_dir_m =
+ cpu_to_le32(((ncg_tag & 0xff)<<16)|((ATAP & 0x3f) << 10) | dir);
+ sata_cmd.sata_fis = task->ata_task.fis;
+ if (likely(!task->ata_task.device_control_reg_update))
+ sata_cmd.sata_fis.flags |= 0x80;/* C=1: update ATA cmd reg */
+ sata_cmd.sata_fis.flags &= 0xF0;/* PM_PORT field shall be 0 */
+ /* fill in PRD (scatter/gather) table, if any */
+ if (task->num_scatter > 1) {
+ pm8001_chip_make_sg(task->scatter, ccb->n_elem, ccb->buf_prd);
+ phys_addr = cpu_to_le64(ccb->ccb_dma_handle +
+ offsetof(struct pm8001_ccb_info, buf_prd[0]));
+ sata_cmd.addr_low = lower_32_bits(phys_addr);
+ sata_cmd.addr_high = upper_32_bits(phys_addr);
+ sata_cmd.esgl = cpu_to_le32(1 << 31);
+ } else if (task->num_scatter == 1) {
+ __le64 dma_addr = cpu_to_le64(sg_dma_address(task->scatter));
+ sata_cmd.addr_low = lower_32_bits(dma_addr);
+ sata_cmd.addr_high = upper_32_bits(dma_addr);
+ sata_cmd.len = cpu_to_le32(task->total_xfer_len);
+ sata_cmd.esgl = 0;
+ } else if (task->num_scatter == 0) {
+ sata_cmd.addr_low = 0;
+ sata_cmd.addr_high = 0;
+ sata_cmd.len = cpu_to_le32(task->total_xfer_len);
+ sata_cmd.esgl = 0;
+ }
+ ret = mpi_build_cmd(pm8001_ha, circularQ, opc, &sata_cmd);
+ return ret;
+}
+
+/**
+ * pm8001_chip_phy_start_req - start phy via PHY_START COMMAND
+ * @pm8001_ha: our hba card information.
+ * @num: the inbound queue number
+ * @phy_id: the phy id which we wanted to start up.
+ */
+static int
+pm8001_chip_phy_start_req(struct pm8001_hba_info *pm8001_ha, u8 phy_id)
+{
+ struct phy_start_req payload;
+ struct inbound_queue_table *circularQ;
+ int ret;
+ u32 tag = 0x01;
+ u32 opcode = OPC_INB_PHYSTART;
+ circularQ = &pm8001_ha->inbnd_q_tbl[0];
+ memset(&payload, 0, sizeof(payload));
+ payload.tag = cpu_to_le32(tag);
+ /*
+ ** [0:7] PHY Identifier
+ ** [8:11] link rate 1.5G, 3G, 6G
+ ** [12:13] link mode 01b SAS mode; 10b SATA mode; 11b both
+ ** [14] 0b disable spin up hold; 1b enable spin up hold
+ */
+ payload.ase_sh_lm_slr_phyid = cpu_to_le32(SPINHOLD_DISABLE |
+ LINKMODE_AUTO | LINKRATE_15 |
+ LINKRATE_30 | LINKRATE_60 | phy_id);
+ payload.sas_identify.dev_type = SAS_END_DEV;
+ payload.sas_identify.initiator_bits = SAS_PROTOCOL_ALL;
+ memcpy(payload.sas_identify.sas_addr,
+ pm8001_ha->sas_addr, SAS_ADDR_SIZE);
+ payload.sas_identify.phy_id = phy_id;
+ ret = mpi_build_cmd(pm8001_ha, circularQ, opcode, &payload);
+ return ret;
+}
+
+/**
+ * pm8001_chip_phy_stop_req - start phy via PHY_STOP COMMAND
+ * @pm8001_ha: our hba card information.
+ * @num: the inbound queue number
+ * @phy_id: the phy id which we wanted to start up.
+ */
+static int pm8001_chip_phy_stop_req(struct pm8001_hba_info *pm8001_ha,
+ u8 phy_id)
+{
+ struct phy_stop_req payload;
+ struct inbound_queue_table *circularQ;
+ int ret;
+ u32 tag = 0x01;
+ u32 opcode = OPC_INB_PHYSTOP;
+ circularQ = &pm8001_ha->inbnd_q_tbl[0];
+ memset(&payload, 0, sizeof(payload));
+ payload.tag = cpu_to_le32(tag);
+ payload.phy_id = cpu_to_le32(phy_id);
+ ret = mpi_build_cmd(pm8001_ha, circularQ, opcode, &payload);
+ return ret;
+}
+
+/**
+ * see comments on mpi_reg_resp.
+ */
+static int pm8001_chip_reg_dev_req(struct pm8001_hba_info *pm8001_ha,
+ struct pm8001_device *pm8001_dev, u32 flag)
+{
+ struct reg_dev_req payload;
+ u32 opc;
+ u32 stp_sspsmp_sata = 0x4;
+ struct inbound_queue_table *circularQ;
+ u32 linkrate, phy_id;
+ int rc, tag = 0xdeadbeef;
+ struct pm8001_ccb_info *ccb;
+ u8 retryFlag = 0x1;
+ u16 firstBurstSize = 0;
+ u16 ITNT = 2000;
+ struct domain_device *dev = pm8001_dev->sas_device;
+ struct domain_device *parent_dev = dev->parent;
+ circularQ = &pm8001_ha->inbnd_q_tbl[0];
+
+ memset(&payload, 0, sizeof(payload));
+ rc = pm8001_tag_alloc(pm8001_ha, &tag);
+ if (rc)
+ return rc;
+ ccb = &pm8001_ha->ccb_info[tag];
+ ccb->device = pm8001_dev;
+ ccb->ccb_tag = tag;
+ payload.tag = cpu_to_le32(tag);
+ if (flag == 1)
+ stp_sspsmp_sata = 0x02; /*direct attached sata */
+ else {
+ if (pm8001_dev->dev_type == SATA_DEV)
+ stp_sspsmp_sata = 0x00; /* stp*/
+ else if (pm8001_dev->dev_type == SAS_END_DEV ||
+ pm8001_dev->dev_type == EDGE_DEV ||
+ pm8001_dev->dev_type == FANOUT_DEV)
+ stp_sspsmp_sata = 0x01; /*ssp or smp*/
+ }
+ if (parent_dev && DEV_IS_EXPANDER(parent_dev->dev_type))
+ phy_id = parent_dev->ex_dev.ex_phy->phy_id;
+ else
+ phy_id = pm8001_dev->attached_phy;
+ opc = OPC_INB_REG_DEV;
+ linkrate = (pm8001_dev->sas_device->linkrate < dev->port->linkrate) ?
+ pm8001_dev->sas_device->linkrate : dev->port->linkrate;
+ payload.phyid_portid =
+ cpu_to_le32(((pm8001_dev->sas_device->port->id) & 0x0F) |
+ ((phy_id & 0x0F) << 4));
+ payload.dtype_dlr_retry = cpu_to_le32((retryFlag & 0x01) |
+ ((linkrate & 0x0F) * 0x1000000) |
+ ((stp_sspsmp_sata & 0x03) * 0x10000000));
+ payload.firstburstsize_ITNexustimeout =
+ cpu_to_le32(ITNT | (firstBurstSize * 0x10000));
+ memcpy(&payload.sas_addr_hi, pm8001_dev->sas_device->sas_addr,
+ SAS_ADDR_SIZE);
+ rc = mpi_build_cmd(pm8001_ha, circularQ, opc, &payload);
+ return rc;
+}
+
+/**
+ * see comments on mpi_reg_resp.
+ */
+static int pm8001_chip_dereg_dev_req(struct pm8001_hba_info *pm8001_ha,
+ u32 device_id)
+{
+ struct dereg_dev_req payload;
+ u32 opc = OPC_INB_DEREG_DEV_HANDLE;
+ int ret;
+ struct inbound_queue_table *circularQ;
+
+ circularQ = &pm8001_ha->inbnd_q_tbl[0];
+ memset(&payload, 0, sizeof(payload));
+ payload.tag = 1;
+ payload.device_id = cpu_to_le32(device_id);
+ PM8001_MSG_DBG(pm8001_ha,
+ pm8001_printk("unregister device device_id = %d\n", device_id));
+ ret = mpi_build_cmd(pm8001_ha, circularQ, opc, &payload);
+ return ret;
+}
+
+/**
+ * pm8001_chip_phy_ctl_req - support the local phy operation
+ * @pm8001_ha: our hba card information.
+ * @num: the inbound queue number
+ * @phy_id: the phy id which we wanted to operate
+ * @phy_op:
+ */
+static int pm8001_chip_phy_ctl_req(struct pm8001_hba_info *pm8001_ha,
+ u32 phyId, u32 phy_op)
+{
+ struct local_phy_ctl_req payload;
+ struct inbound_queue_table *circularQ;
+ int ret;
+ u32 opc = OPC_INB_LOCAL_PHY_CONTROL;
+ memset((u8 *)&payload, 0, sizeof(payload));
+ circularQ = &pm8001_ha->inbnd_q_tbl[0];
+ payload.tag = 1;
+ payload.phyop_phyid =
+ cpu_to_le32(((phy_op & 0xff) << 8) | (phyId & 0x0F));
+ ret = mpi_build_cmd(pm8001_ha, circularQ, opc, &payload);
+ return ret;
+}
+
+static u32 pm8001_chip_is_our_interupt(struct pm8001_hba_info *pm8001_ha)
+{
+ u32 value;
+#ifdef PM8001_USE_MSIX
+ return 1;
+#endif
+ value = pm8001_cr32(pm8001_ha, 0, MSGU_ODR);
+ if (value)
+ return 1;
+ return 0;
+
+}
+
+/**
+ * pm8001_chip_isr - PM8001 isr handler.
+ * @pm8001_ha: our hba card information.
+ * @irq: irq number.
+ * @stat: stat.
+ */
+static irqreturn_t
+pm8001_chip_isr(struct pm8001_hba_info *pm8001_ha)
+{
+ unsigned long flags;
+ spin_lock_irqsave(&pm8001_ha->lock, flags);
+ pm8001_chip_interrupt_disable(pm8001_ha);
+ process_oq(pm8001_ha);
+ pm8001_chip_interrupt_enable(pm8001_ha);
+ spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+ return IRQ_HANDLED;
+}
+
+static int send_task_abort(struct pm8001_hba_info *pm8001_ha, u32 opc,
+ u32 dev_id, u8 flag, u32 task_tag, u32 cmd_tag)
+{
+ struct task_abort_req task_abort;
+ struct inbound_queue_table *circularQ;
+ int ret;
+ circularQ = &pm8001_ha->inbnd_q_tbl[0];
+ memset(&task_abort, 0, sizeof(task_abort));
+ if (ABORT_SINGLE == (flag & ABORT_MASK)) {
+ task_abort.abort_all = 0;
+ task_abort.device_id = cpu_to_le32(dev_id);
+ task_abort.tag_to_abort = cpu_to_le32(task_tag);
+ task_abort.tag = cpu_to_le32(cmd_tag);
+ } else if (ABORT_ALL == (flag & ABORT_MASK)) {
+ task_abort.abort_all = cpu_to_le32(1);
+ task_abort.device_id = cpu_to_le32(dev_id);
+ task_abort.tag = cpu_to_le32(cmd_tag);
+ }
+ ret = mpi_build_cmd(pm8001_ha, circularQ, opc, &task_abort);
+ return ret;
+}
+
+/**
+ * pm8001_chip_abort_task - SAS abort task when error or exception happened.
+ * @task: the task we wanted to aborted.
+ * @flag: the abort flag.
+ */
+static int pm8001_chip_abort_task(struct pm8001_hba_info *pm8001_ha,
+ struct pm8001_device *pm8001_dev, u8 flag, u32 task_tag, u32 cmd_tag)
+{
+ u32 opc, device_id;
+ int rc = TMF_RESP_FUNC_FAILED;
+ PM8001_EH_DBG(pm8001_ha, pm8001_printk("cmd_tag = %x, abort task tag"
+ " = %x", cmd_tag, task_tag));
+ if (pm8001_dev->dev_type == SAS_END_DEV)
+ opc = OPC_INB_SSP_ABORT;
+ else if (pm8001_dev->dev_type == SATA_DEV)
+ opc = OPC_INB_SATA_ABORT;
+ else
+ opc = OPC_INB_SMP_ABORT;/* SMP */
+ device_id = pm8001_dev->device_id;
+ rc = send_task_abort(pm8001_ha, opc, device_id, flag,
+ task_tag, cmd_tag);
+ if (rc != TMF_RESP_FUNC_COMPLETE)
+ PM8001_EH_DBG(pm8001_ha, pm8001_printk("rc= %d\n", rc));
+ return rc;
+}
+
+/**
+ * pm8001_chip_ssp_tm_req - built the task managment command.
+ * @pm8001_ha: our hba card information.
+ * @ccb: the ccb information.
+ * @tmf: task management function.
+ */
+static int pm8001_chip_ssp_tm_req(struct pm8001_hba_info *pm8001_ha,
+ struct pm8001_ccb_info *ccb, struct pm8001_tmf_task *tmf)
+{
+ struct sas_task *task = ccb->task;
+ struct domain_device *dev = task->dev;
+ struct pm8001_device *pm8001_dev = dev->lldd_dev;
+ u32 opc = OPC_INB_SSPINITMSTART;
+ struct inbound_queue_table *circularQ;
+ struct ssp_ini_tm_start_req sspTMCmd;
+ int ret;
+
+ memset(&sspTMCmd, 0, sizeof(sspTMCmd));
+ sspTMCmd.device_id = cpu_to_le32(pm8001_dev->device_id);
+ sspTMCmd.relate_tag = cpu_to_le32(tmf->tag_of_task_to_be_managed);
+ sspTMCmd.tmf = cpu_to_le32(tmf->tmf);
+ memcpy(sspTMCmd.lun, task->ssp_task.LUN, 8);
+ sspTMCmd.tag = cpu_to_le32(ccb->ccb_tag);
+ circularQ = &pm8001_ha->inbnd_q_tbl[0];
+ ret = mpi_build_cmd(pm8001_ha, circularQ, opc, &sspTMCmd);
+ return ret;
+}
+
+static int pm8001_chip_get_nvmd_req(struct pm8001_hba_info *pm8001_ha,
+ void *payload)
+{
+ u32 opc = OPC_INB_GET_NVMD_DATA;
+ u32 nvmd_type;
+ int rc;
+ u32 tag;
+ struct pm8001_ccb_info *ccb;
+ struct inbound_queue_table *circularQ;
+ struct get_nvm_data_req nvmd_req;
+ struct fw_control_ex *fw_control_context;
+ struct pm8001_ioctl_payload *ioctl_payload = payload;
+
+ nvmd_type = ioctl_payload->minor_function;
+ fw_control_context = kzalloc(sizeof(struct fw_control_ex), GFP_KERNEL);
+ fw_control_context->usrAddr = (u8 *)&ioctl_payload->func_specific[0];
+ fw_control_context->len = ioctl_payload->length;
+ circularQ = &pm8001_ha->inbnd_q_tbl[0];
+ memset(&nvmd_req, 0, sizeof(nvmd_req));
+ rc = pm8001_tag_alloc(pm8001_ha, &tag);
+ if (rc)
+ return rc;
+ ccb = &pm8001_ha->ccb_info[tag];
+ ccb->ccb_tag = tag;
+ ccb->fw_control_context = fw_control_context;
+ nvmd_req.tag = cpu_to_le32(tag);
+
+ switch (nvmd_type) {
+ case TWI_DEVICE: {
+ u32 twi_addr, twi_page_size;
+ twi_addr = 0xa8;
+ twi_page_size = 2;
+
+ nvmd_req.len_ir_vpdd = cpu_to_le32(IPMode | twi_addr << 16 |
+ twi_page_size << 8 | TWI_DEVICE);
+ nvmd_req.resp_len = cpu_to_le32(ioctl_payload->length);
+ nvmd_req.resp_addr_hi =
+ cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_hi);
+ nvmd_req.resp_addr_lo =
+ cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_lo);
+ break;
+ }
+ case C_SEEPROM: {
+ nvmd_req.len_ir_vpdd = cpu_to_le32(IPMode | C_SEEPROM);
+ nvmd_req.resp_len = cpu_to_le32(ioctl_payload->length);
+ nvmd_req.resp_addr_hi =
+ cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_hi);
+ nvmd_req.resp_addr_lo =
+ cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_lo);
+ break;
+ }
+ case VPD_FLASH: {
+ nvmd_req.len_ir_vpdd = cpu_to_le32(IPMode | VPD_FLASH);
+ nvmd_req.resp_len = cpu_to_le32(ioctl_payload->length);
+ nvmd_req.resp_addr_hi =
+ cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_hi);
+ nvmd_req.resp_addr_lo =
+ cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_lo);
+ break;
+ }
+ case EXPAN_ROM: {
+ nvmd_req.len_ir_vpdd = cpu_to_le32(IPMode | EXPAN_ROM);
+ nvmd_req.resp_len = cpu_to_le32(ioctl_payload->length);
+ nvmd_req.resp_addr_hi =
+ cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_hi);
+ nvmd_req.resp_addr_lo =
+ cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_lo);
+ break;
+ }
+ default:
+ break;
+ }
+ rc = mpi_build_cmd(pm8001_ha, circularQ, opc, &nvmd_req);
+ return rc;
+}
+
+static int pm8001_chip_set_nvmd_req(struct pm8001_hba_info *pm8001_ha,
+ void *payload)
+{
+ u32 opc = OPC_INB_SET_NVMD_DATA;
+ u32 nvmd_type;
+ int rc;
+ u32 tag;
+ struct pm8001_ccb_info *ccb;
+ struct inbound_queue_table *circularQ;
+ struct set_nvm_data_req nvmd_req;
+ struct fw_control_ex *fw_control_context;
+ struct pm8001_ioctl_payload *ioctl_payload = payload;
+
+ nvmd_type = ioctl_payload->minor_function;
+ fw_control_context = kzalloc(sizeof(struct fw_control_ex), GFP_KERNEL);
+ circularQ = &pm8001_ha->inbnd_q_tbl[0];
+ memcpy(pm8001_ha->memoryMap.region[NVMD].virt_ptr,
+ ioctl_payload->func_specific,
+ ioctl_payload->length);
+ memset(&nvmd_req, 0, sizeof(nvmd_req));
+ rc = pm8001_tag_alloc(pm8001_ha, &tag);
+ if (rc)
+ return rc;
+ ccb = &pm8001_ha->ccb_info[tag];
+ ccb->fw_control_context = fw_control_context;
+ ccb->ccb_tag = tag;
+ nvmd_req.tag = cpu_to_le32(tag);
+ switch (nvmd_type) {
+ case TWI_DEVICE: {
+ u32 twi_addr, twi_page_size;
+ twi_addr = 0xa8;
+ twi_page_size = 2;
+ nvmd_req.reserved[0] = cpu_to_le32(0xFEDCBA98);
+ nvmd_req.len_ir_vpdd = cpu_to_le32(IPMode | twi_addr << 16 |
+ twi_page_size << 8 | TWI_DEVICE);
+ nvmd_req.resp_len = cpu_to_le32(ioctl_payload->length);
+ nvmd_req.resp_addr_hi =
+ cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_hi);
+ nvmd_req.resp_addr_lo =
+ cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_lo);
+ break;
+ }
+ case C_SEEPROM:
+ nvmd_req.len_ir_vpdd = cpu_to_le32(IPMode | C_SEEPROM);
+ nvmd_req.resp_len = cpu_to_le32(ioctl_payload->length);
+ nvmd_req.reserved[0] = cpu_to_le32(0xFEDCBA98);
+ nvmd_req.resp_addr_hi =
+ cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_hi);
+ nvmd_req.resp_addr_lo =
+ cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_lo);
+ break;
+ case VPD_FLASH:
+ nvmd_req.len_ir_vpdd = cpu_to_le32(IPMode | VPD_FLASH);
+ nvmd_req.resp_len = cpu_to_le32(ioctl_payload->length);
+ nvmd_req.reserved[0] = cpu_to_le32(0xFEDCBA98);
+ nvmd_req.resp_addr_hi =
+ cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_hi);
+ nvmd_req.resp_addr_lo =
+ cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_lo);
+ break;
+ case EXPAN_ROM:
+ nvmd_req.len_ir_vpdd = cpu_to_le32(IPMode | EXPAN_ROM);
+ nvmd_req.resp_len = cpu_to_le32(ioctl_payload->length);
+ nvmd_req.reserved[0] = cpu_to_le32(0xFEDCBA98);
+ nvmd_req.resp_addr_hi =
+ cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_hi);
+ nvmd_req.resp_addr_lo =
+ cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_lo);
+ break;
+ default:
+ break;
+ }
+ rc = mpi_build_cmd(pm8001_ha, circularQ, opc, &nvmd_req);
+ return rc;
+}
+
+/**
+ * pm8001_chip_fw_flash_update_build - support the firmware update operation
+ * @pm8001_ha: our hba card information.
+ * @fw_flash_updata_info: firmware flash update param
+ */
+static int
+pm8001_chip_fw_flash_update_build(struct pm8001_hba_info *pm8001_ha,
+ void *fw_flash_updata_info, u32 tag)
+{
+ struct fw_flash_Update_req payload;
+ struct fw_flash_updata_info *info;
+ struct inbound_queue_table *circularQ;
+ int ret;
+ u32 opc = OPC_INB_FW_FLASH_UPDATE;
+
+ memset(&payload, 0, sizeof(struct fw_flash_Update_req));
+ circularQ = &pm8001_ha->inbnd_q_tbl[0];
+ info = fw_flash_updata_info;
+ payload.tag = cpu_to_le32(tag);
+ payload.cur_image_len = cpu_to_le32(info->cur_image_len);
+ payload.cur_image_offset = cpu_to_le32(info->cur_image_offset);
+ payload.total_image_len = cpu_to_le32(info->total_image_len);
+ payload.len = info->sgl.im_len.len ;
+ payload.sgl_addr_lo = lower_32_bits(info->sgl.addr);
+ payload.sgl_addr_hi = upper_32_bits(info->sgl.addr);
+ ret = mpi_build_cmd(pm8001_ha, circularQ, opc, &payload);
+ return ret;
+}
+
+static int
+pm8001_chip_fw_flash_update_req(struct pm8001_hba_info *pm8001_ha,
+ void *payload)
+{
+ struct fw_flash_updata_info flash_update_info;
+ struct fw_control_info *fw_control;
+ struct fw_control_ex *fw_control_context;
+ int rc;
+ u32 tag;
+ struct pm8001_ccb_info *ccb;
+ void *buffer = NULL;
+ dma_addr_t phys_addr;
+ u32 phys_addr_hi;
+ u32 phys_addr_lo;
+ struct pm8001_ioctl_payload *ioctl_payload = payload;
+
+ fw_control_context = kzalloc(sizeof(struct fw_control_ex), GFP_KERNEL);
+ fw_control = (struct fw_control_info *)&ioctl_payload->func_specific[0];
+ if (fw_control->len != 0) {
+ if (pm8001_mem_alloc(pm8001_ha->pdev,
+ (void **)&buffer,
+ &phys_addr,
+ &phys_addr_hi,
+ &phys_addr_lo,
+ fw_control->len, 0) != 0) {
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("Mem alloc failure\n"));
+ return -ENOMEM;
+ }
+ }
+ memset(buffer, 0, fw_control->len);
+ memcpy(buffer, fw_control->buffer, fw_control->len);
+ flash_update_info.sgl.addr = cpu_to_le64(phys_addr);
+ flash_update_info.sgl.im_len.len = cpu_to_le32(fw_control->len);
+ flash_update_info.sgl.im_len.e = 0;
+ flash_update_info.cur_image_offset = fw_control->offset;
+ flash_update_info.cur_image_len = fw_control->len;
+ flash_update_info.total_image_len = fw_control->size;
+ fw_control_context->fw_control = fw_control;
+ fw_control_context->virtAddr = buffer;
+ fw_control_context->len = fw_control->len;
+ rc = pm8001_tag_alloc(pm8001_ha, &tag);
+ if (rc)
+ return rc;
+ ccb = &pm8001_ha->ccb_info[tag];
+ ccb->fw_control_context = fw_control_context;
+ ccb->ccb_tag = tag;
+ rc = pm8001_chip_fw_flash_update_build(pm8001_ha, &flash_update_info,
+ tag);
+ return rc;
+}
+
+static int
+pm8001_chip_set_dev_state_req(struct pm8001_hba_info *pm8001_ha,
+ struct pm8001_device *pm8001_dev, u32 state)
+{
+ struct set_dev_state_req payload;
+ struct inbound_queue_table *circularQ;
+ struct pm8001_ccb_info *ccb;
+ int rc;
+ u32 tag;
+ u32 opc = OPC_INB_SET_DEVICE_STATE;
+ memset(&payload, 0, sizeof(payload));
+ rc = pm8001_tag_alloc(pm8001_ha, &tag);
+ if (rc)
+ return -1;
+ ccb = &pm8001_ha->ccb_info[tag];
+ ccb->ccb_tag = tag;
+ ccb->device = pm8001_dev;
+ circularQ = &pm8001_ha->inbnd_q_tbl[0];
+ payload.tag = cpu_to_le32(tag);
+ payload.device_id = cpu_to_le32(pm8001_dev->device_id);
+ payload.nds = cpu_to_le32(state);
+ rc = mpi_build_cmd(pm8001_ha, circularQ, opc, &payload);
+ return rc;
+
+}
+
+static int
+pm8001_chip_sas_re_initialization(struct pm8001_hba_info *pm8001_ha)
+{
+ struct sas_re_initialization_req payload;
+ struct inbound_queue_table *circularQ;
+ struct pm8001_ccb_info *ccb;
+ int rc;
+ u32 tag;
+ u32 opc = OPC_INB_SAS_RE_INITIALIZE;
+ memset(&payload, 0, sizeof(payload));
+ rc = pm8001_tag_alloc(pm8001_ha, &tag);
+ if (rc)
+ return -1;
+ ccb = &pm8001_ha->ccb_info[tag];
+ ccb->ccb_tag = tag;
+ circularQ = &pm8001_ha->inbnd_q_tbl[0];
+ payload.tag = cpu_to_le32(tag);
+ payload.SSAHOLT = cpu_to_le32(0xd << 25);
+ payload.sata_hol_tmo = cpu_to_le32(80);
+ payload.open_reject_cmdretries_data_retries = cpu_to_le32(0xff00ff);
+ rc = mpi_build_cmd(pm8001_ha, circularQ, opc, &payload);
+ return rc;
+
+}
+
+const struct pm8001_dispatch pm8001_8001_dispatch = {
+ .name = "pmc8001",
+ .chip_init = pm8001_chip_init,
+ .chip_soft_rst = pm8001_chip_soft_rst,
+ .chip_rst = pm8001_hw_chip_rst,
+ .chip_iounmap = pm8001_chip_iounmap,
+ .isr = pm8001_chip_isr,
+ .is_our_interupt = pm8001_chip_is_our_interupt,
+ .isr_process_oq = process_oq,
+ .interrupt_enable = pm8001_chip_interrupt_enable,
+ .interrupt_disable = pm8001_chip_interrupt_disable,
+ .make_prd = pm8001_chip_make_sg,
+ .smp_req = pm8001_chip_smp_req,
+ .ssp_io_req = pm8001_chip_ssp_io_req,
+ .sata_req = pm8001_chip_sata_req,
+ .phy_start_req = pm8001_chip_phy_start_req,
+ .phy_stop_req = pm8001_chip_phy_stop_req,
+ .reg_dev_req = pm8001_chip_reg_dev_req,
+ .dereg_dev_req = pm8001_chip_dereg_dev_req,
+ .phy_ctl_req = pm8001_chip_phy_ctl_req,
+ .task_abort = pm8001_chip_abort_task,
+ .ssp_tm_req = pm8001_chip_ssp_tm_req,
+ .get_nvmd_req = pm8001_chip_get_nvmd_req,
+ .set_nvmd_req = pm8001_chip_set_nvmd_req,
+ .fw_flash_update_req = pm8001_chip_fw_flash_update_req,
+ .set_dev_state_req = pm8001_chip_set_dev_state_req,
+ .sas_re_init_req = pm8001_chip_sas_re_initialization,
+};
+
diff --git a/drivers/scsi/pm8001/pm8001_hwi.h b/drivers/scsi/pm8001/pm8001_hwi.h
new file mode 100644
index 0000000..96e4daa
--- /dev/null
+++ b/drivers/scsi/pm8001/pm8001_hwi.h
@@ -0,0 +1,1030 @@
+/*
+ * PMC-Sierra SPC 8001 SAS/SATA based host adapters driver
+ *
+ * Copyright (c) 2008-2009 USI Co., Ltd.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * substantially similar to the "NO WARRANTY" disclaimer below
+ * ("Disclaimer") and any redistribution must be conditioned upon
+ * including a substantially similar Disclaimer requirement for further
+ * binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ *
+ */
+#ifndef _PMC8001_REG_H_
+#define _PMC8001_REG_H_
+
+#include <linux/types.h>
+#include <scsi/libsas.h>
+
+
+/* for Request Opcode of IOMB */
+#define OPC_INB_ECHO 1 /* 0x000 */
+#define OPC_INB_PHYSTART 4 /* 0x004 */
+#define OPC_INB_PHYSTOP 5 /* 0x005 */
+#define OPC_INB_SSPINIIOSTART 6 /* 0x006 */
+#define OPC_INB_SSPINITMSTART 7 /* 0x007 */
+#define OPC_INB_SSPINIEXTIOSTART 8 /* 0x008 */
+#define OPC_INB_DEV_HANDLE_ACCEPT 9 /* 0x009 */
+#define OPC_INB_SSPTGTIOSTART 10 /* 0x00A */
+#define OPC_INB_SSPTGTRSPSTART 11 /* 0x00B */
+#define OPC_INB_SSPINIEDCIOSTART 12 /* 0x00C */
+#define OPC_INB_SSPINIEXTEDCIOSTART 13 /* 0x00D */
+#define OPC_INB_SSPTGTEDCIOSTART 14 /* 0x00E */
+#define OPC_INB_SSP_ABORT 15 /* 0x00F */
+#define OPC_INB_DEREG_DEV_HANDLE 16 /* 0x010 */
+#define OPC_INB_GET_DEV_HANDLE 17 /* 0x011 */
+#define OPC_INB_SMP_REQUEST 18 /* 0x012 */
+/* SMP_RESPONSE is removed */
+#define OPC_INB_SMP_RESPONSE 19 /* 0x013 */
+#define OPC_INB_SMP_ABORT 20 /* 0x014 */
+#define OPC_INB_REG_DEV 22 /* 0x016 */
+#define OPC_INB_SATA_HOST_OPSTART 23 /* 0x017 */
+#define OPC_INB_SATA_ABORT 24 /* 0x018 */
+#define OPC_INB_LOCAL_PHY_CONTROL 25 /* 0x019 */
+#define OPC_INB_GET_DEV_INFO 26 /* 0x01A */
+#define OPC_INB_FW_FLASH_UPDATE 32 /* 0x020 */
+#define OPC_INB_GPIO 34 /* 0x022 */
+#define OPC_INB_SAS_DIAG_MODE_START_END 35 /* 0x023 */
+#define OPC_INB_SAS_DIAG_EXECUTE 36 /* 0x024 */
+#define OPC_INB_SAS_HW_EVENT_ACK 37 /* 0x025 */
+#define OPC_INB_GET_TIME_STAMP 38 /* 0x026 */
+#define OPC_INB_PORT_CONTROL 39 /* 0x027 */
+#define OPC_INB_GET_NVMD_DATA 40 /* 0x028 */
+#define OPC_INB_SET_NVMD_DATA 41 /* 0x029 */
+#define OPC_INB_SET_DEVICE_STATE 42 /* 0x02A */
+#define OPC_INB_GET_DEVICE_STATE 43 /* 0x02B */
+#define OPC_INB_SET_DEV_INFO 44 /* 0x02C */
+#define OPC_INB_SAS_RE_INITIALIZE 45 /* 0x02D */
+
+/* for Response Opcode of IOMB */
+#define OPC_OUB_ECHO 1 /* 0x001 */
+#define OPC_OUB_HW_EVENT 4 /* 0x004 */
+#define OPC_OUB_SSP_COMP 5 /* 0x005 */
+#define OPC_OUB_SMP_COMP 6 /* 0x006 */
+#define OPC_OUB_LOCAL_PHY_CNTRL 7 /* 0x007 */
+#define OPC_OUB_DEV_REGIST 10 /* 0x00A */
+#define OPC_OUB_DEREG_DEV 11 /* 0x00B */
+#define OPC_OUB_GET_DEV_HANDLE 12 /* 0x00C */
+#define OPC_OUB_SATA_COMP 13 /* 0x00D */
+#define OPC_OUB_SATA_EVENT 14 /* 0x00E */
+#define OPC_OUB_SSP_EVENT 15 /* 0x00F */
+#define OPC_OUB_DEV_HANDLE_ARRIV 16 /* 0x010 */
+/* SMP_RECEIVED Notification is removed */
+#define OPC_OUB_SMP_RECV_EVENT 17 /* 0x011 */
+#define OPC_OUB_SSP_RECV_EVENT 18 /* 0x012 */
+#define OPC_OUB_DEV_INFO 19 /* 0x013 */
+#define OPC_OUB_FW_FLASH_UPDATE 20 /* 0x014 */
+#define OPC_OUB_GPIO_RESPONSE 22 /* 0x016 */
+#define OPC_OUB_GPIO_EVENT 23 /* 0x017 */
+#define OPC_OUB_GENERAL_EVENT 24 /* 0x018 */
+#define OPC_OUB_SSP_ABORT_RSP 26 /* 0x01A */
+#define OPC_OUB_SATA_ABORT_RSP 27 /* 0x01B */
+#define OPC_OUB_SAS_DIAG_MODE_START_END 28 /* 0x01C */
+#define OPC_OUB_SAS_DIAG_EXECUTE 29 /* 0x01D */
+#define OPC_OUB_GET_TIME_STAMP 30 /* 0x01E */
+#define OPC_OUB_SAS_HW_EVENT_ACK 31 /* 0x01F */
+#define OPC_OUB_PORT_CONTROL 32 /* 0x020 */
+#define OPC_OUB_SKIP_ENTRY 33 /* 0x021 */
+#define OPC_OUB_SMP_ABORT_RSP 34 /* 0x022 */
+#define OPC_OUB_GET_NVMD_DATA 35 /* 0x023 */
+#define OPC_OUB_SET_NVMD_DATA 36 /* 0x024 */
+#define OPC_OUB_DEVICE_HANDLE_REMOVAL 37 /* 0x025 */
+#define OPC_OUB_SET_DEVICE_STATE 38 /* 0x026 */
+#define OPC_OUB_GET_DEVICE_STATE 39 /* 0x027 */
+#define OPC_OUB_SET_DEV_INFO 40 /* 0x028 */
+#define OPC_OUB_SAS_RE_INITIALIZE 41 /* 0x029 */
+
+/* for phy start*/
+#define SPINHOLD_DISABLE (0x00 << 14)
+#define SPINHOLD_ENABLE (0x01 << 14)
+#define LINKMODE_SAS (0x01 << 12)
+#define LINKMODE_DSATA (0x02 << 12)
+#define LINKMODE_AUTO (0x03 << 12)
+#define LINKRATE_15 (0x01 << 8)
+#define LINKRATE_30 (0x02 << 8)
+#define LINKRATE_60 (0x04 << 8)
+
+struct mpi_msg_hdr{
+ __le32 header; /* Bits [11:0] - Message operation code */
+ /* Bits [15:12] - Message Category */
+ /* Bits [21:16] - Outboundqueue ID for the
+ operation completion message */
+ /* Bits [23:22] - Reserved */
+ /* Bits [28:24] - Buffer Count, indicates how
+ many buffer are allocated for the massage */
+ /* Bits [30:29] - Reserved */
+ /* Bits [31] - Message Valid bit */
+} __attribute__((packed, aligned(4)));
+
+
+/*
+ * brief the data structure of PHY Start Command
+ * use to describe enable the phy (64 bytes)
+ */
+struct phy_start_req {
+ __le32 tag;
+ __le32 ase_sh_lm_slr_phyid;
+ struct sas_identify_frame sas_identify;
+ u32 reserved[5];
+} __attribute__((packed, aligned(4)));
+
+
+/*
+ * brief the data structure of PHY Start Command
+ * use to disable the phy (64 bytes)
+ */
+struct phy_stop_req {
+ __le32 tag;
+ __le32 phy_id;
+ u32 reserved[13];
+} __attribute__((packed, aligned(4)));
+
+
+/* set device bits fis - device to host */
+struct set_dev_bits_fis {
+ u8 fis_type; /* 0xA1*/
+ u8 n_i_pmport;
+ /* b7 : n Bit. Notification bit. If set device needs attention. */
+ /* b6 : i Bit. Interrupt Bit */
+ /* b5-b4: reserved2 */
+ /* b3-b0: PM Port */
+ u8 status;
+ u8 error;
+ u32 _r_a;
+} __attribute__ ((packed));
+/* PIO setup FIS - device to host */
+struct pio_setup_fis {
+ u8 fis_type; /* 0x5f */
+ u8 i_d_pmPort;
+ /* b7 : reserved */
+ /* b6 : i bit. Interrupt bit */
+ /* b5 : d bit. data transfer direction. set to 1 for device to host
+ xfer */
+ /* b4 : reserved */
+ /* b3-b0: PM Port */
+ u8 status;
+ u8 error;
+ u8 lbal;
+ u8 lbam;
+ u8 lbah;
+ u8 device;
+ u8 lbal_exp;
+ u8 lbam_exp;
+ u8 lbah_exp;
+ u8 _r_a;
+ u8 sector_count;
+ u8 sector_count_exp;
+ u8 _r_b;
+ u8 e_status;
+ u8 _r_c[2];
+ u8 transfer_count;
+} __attribute__ ((packed));
+
+/*
+ * brief the data structure of SATA Completion Response
+ * use to discribe the sata task response (64 bytes)
+ */
+struct sata_completion_resp {
+ __le32 tag;
+ __le32 status;
+ __le32 param;
+ u32 sata_resp[12];
+} __attribute__((packed, aligned(4)));
+
+
+/*
+ * brief the data structure of SAS HW Event Notification
+ * use to alert the host about the hardware event(64 bytes)
+ */
+struct hw_event_resp {
+ __le32 lr_evt_status_phyid_portid;
+ __le32 evt_param;
+ __le32 npip_portstate;
+ struct sas_identify_frame sas_identify;
+ struct dev_to_host_fis sata_fis;
+} __attribute__((packed, aligned(4)));
+
+
+/*
+ * brief the data structure of REGISTER DEVICE Command
+ * use to describe MPI REGISTER DEVICE Command (64 bytes)
+ */
+
+struct reg_dev_req {
+ __le32 tag;
+ __le32 phyid_portid;
+ __le32 dtype_dlr_retry;
+ __le32 firstburstsize_ITNexustimeout;
+ u32 sas_addr_hi;
+ u32 sas_addr_low;
+ __le32 upper_device_id;
+ u32 reserved[8];
+} __attribute__((packed, aligned(4)));
+
+
+/*
+ * brief the data structure of DEREGISTER DEVICE Command
+ * use to request spc to remove all internal resources associated
+ * with the device id (64 bytes)
+ */
+
+struct dereg_dev_req {
+ __le32 tag;
+ __le32 device_id;
+ u32 reserved[13];
+} __attribute__((packed, aligned(4)));
+
+
+/*
+ * brief the data structure of DEVICE_REGISTRATION Response
+ * use to notify the completion of the device registration (64 bytes)
+ */
+
+struct dev_reg_resp {
+ __le32 tag;
+ __le32 status;
+ __le32 device_id;
+ u32 reserved[12];
+} __attribute__((packed, aligned(4)));
+
+
+/*
+ * brief the data structure of Local PHY Control Command
+ * use to issue PHY CONTROL to local phy (64 bytes)
+ */
+struct local_phy_ctl_req {
+ __le32 tag;
+ __le32 phyop_phyid;
+ u32 reserved1[13];
+} __attribute__((packed, aligned(4)));
+
+
+/**
+ * brief the data structure of Local Phy Control Response
+ * use to describe MPI Local Phy Control Response (64 bytes)
+ */
+struct local_phy_ctl_resp {
+ __le32 tag;
+ __le32 phyop_phyid;
+ __le32 status;
+ u32 reserved[12];
+} __attribute__((packed, aligned(4)));
+
+
+#define OP_BITS 0x0000FF00
+#define ID_BITS 0x0000000F
+
+/*
+ * brief the data structure of PORT Control Command
+ * use to control port properties (64 bytes)
+ */
+
+struct port_ctl_req {
+ __le32 tag;
+ __le32 portop_portid;
+ __le32 param0;
+ __le32 param1;
+ u32 reserved1[11];
+} __attribute__((packed, aligned(4)));
+
+
+/*
+ * brief the data structure of HW Event Ack Command
+ * use to acknowledge receive HW event (64 bytes)
+ */
+
+struct hw_event_ack_req {
+ __le32 tag;
+ __le32 sea_phyid_portid;
+ __le32 param0;
+ __le32 param1;
+ u32 reserved1[11];
+} __attribute__((packed, aligned(4)));
+
+
+/*
+ * brief the data structure of SSP Completion Response
+ * use to indicate a SSP Completion (n bytes)
+ */
+struct ssp_completion_resp {
+ __le32 tag;
+ __le32 status;
+ __le32 param;
+ __le32 ssptag_rescv_rescpad;
+ struct ssp_response_iu ssp_resp_iu;
+ __le32 residual_count;
+} __attribute__((packed, aligned(4)));
+
+
+#define SSP_RESCV_BIT 0x00010000
+
+/*
+ * brief the data structure of SATA EVNET esponse
+ * use to indicate a SATA Completion (64 bytes)
+ */
+
+struct sata_event_resp {
+ __le32 tag;
+ __le32 event;
+ __le32 port_id;
+ __le32 device_id;
+ u32 reserved[11];
+} __attribute__((packed, aligned(4)));
+
+/*
+ * brief the data structure of SSP EVNET esponse
+ * use to indicate a SSP Completion (64 bytes)
+ */
+
+struct ssp_event_resp {
+ __le32 tag;
+ __le32 event;
+ __le32 port_id;
+ __le32 device_id;
+ u32 reserved[11];
+} __attribute__((packed, aligned(4)));
+
+/**
+ * brief the data structure of General Event Notification Response
+ * use to describe MPI General Event Notification Response (64 bytes)
+ */
+struct general_event_resp {
+ __le32 status;
+ __le32 inb_IOMB_payload[14];
+} __attribute__((packed, aligned(4)));
+
+
+#define GENERAL_EVENT_PAYLOAD 14
+#define OPCODE_BITS 0x00000fff
+
+/*
+ * brief the data structure of SMP Request Command
+ * use to describe MPI SMP REQUEST Command (64 bytes)
+ */
+struct smp_req {
+ __le32 tag;
+ __le32 device_id;
+ __le32 len_ip_ir;
+ /* Bits [0] - Indirect response */
+ /* Bits [1] - Indirect Payload */
+ /* Bits [15:2] - Reserved */
+ /* Bits [23:16] - direct payload Len */
+ /* Bits [31:24] - Reserved */
+ u8 smp_req16[16];
+ union {
+ u8 smp_req[32];
+ struct {
+ __le64 long_req_addr;/* sg dma address, LE */
+ __le32 long_req_size;/* LE */
+ u32 _r_a;
+ __le64 long_resp_addr;/* sg dma address, LE */
+ __le32 long_resp_size;/* LE */
+ u32 _r_b;
+ } long_smp_req;/* sequencer extension */
+ };
+} __attribute__((packed, aligned(4)));
+/*
+ * brief the data structure of SMP Completion Response
+ * use to describe MPI SMP Completion Response (64 bytes)
+ */
+struct smp_completion_resp {
+ __le32 tag;
+ __le32 status;
+ __le32 param;
+ __le32 _r_a[12];
+} __attribute__((packed, aligned(4)));
+
+/*
+ *brief the data structure of SSP SMP SATA Abort Command
+ * use to describe MPI SSP SMP & SATA Abort Command (64 bytes)
+ */
+struct task_abort_req {
+ __le32 tag;
+ __le32 device_id;
+ __le32 tag_to_abort;
+ __le32 abort_all;
+ u32 reserved[11];
+} __attribute__((packed, aligned(4)));
+
+/* These flags used for SSP SMP & SATA Abort */
+#define ABORT_MASK 0x3
+#define ABORT_SINGLE 0x0
+#define ABORT_ALL 0x1
+
+/**
+ * brief the data structure of SSP SATA SMP Abort Response
+ * use to describe SSP SMP & SATA Abort Response ( 64 bytes)
+ */
+struct task_abort_resp {
+ __le32 tag;
+ __le32 status;
+ __le32 scp;
+ u32 reserved[12];
+} __attribute__((packed, aligned(4)));
+
+
+/**
+ * brief the data structure of SAS Diagnostic Start/End Command
+ * use to describe MPI SAS Diagnostic Start/End Command (64 bytes)
+ */
+struct sas_diag_start_end_req {
+ __le32 tag;
+ __le32 operation_phyid;
+ u32 reserved[13];
+} __attribute__((packed, aligned(4)));
+
+
+/**
+ * brief the data structure of SAS Diagnostic Execute Command
+ * use to describe MPI SAS Diagnostic Execute Command (64 bytes)
+ */
+struct sas_diag_execute_req{
+ __le32 tag;
+ __le32 cmdtype_cmddesc_phyid;
+ __le32 pat1_pat2;
+ __le32 threshold;
+ __le32 codepat_errmsk;
+ __le32 pmon;
+ __le32 pERF1CTL;
+ u32 reserved[8];
+} __attribute__((packed, aligned(4)));
+
+
+#define SAS_DIAG_PARAM_BYTES 24
+
+/*
+ * brief the data structure of Set Device State Command
+ * use to describe MPI Set Device State Command (64 bytes)
+ */
+struct set_dev_state_req {
+ __le32 tag;
+ __le32 device_id;
+ __le32 nds;
+ u32 reserved[12];
+} __attribute__((packed, aligned(4)));
+
+/*
+ * brief the data structure of sas_re_initialization
+ */
+struct sas_re_initialization_req {
+
+ __le32 tag;
+ __le32 SSAHOLT;/* bit29-set max port;
+ ** bit28-set open reject cmd retries.
+ ** bit27-set open reject data retries.
+ ** bit26-set open reject option, remap:1 or not:0.
+ ** bit25-set sata head of line time out.
+ */
+ __le32 reserved_maxPorts;
+ __le32 open_reject_cmdretries_data_retries;/* cmd retries: 31-bit16;
+ * data retries: bit15-bit0.
+ */
+ __le32 sata_hol_tmo;
+ u32 reserved1[10];
+} __attribute__((packed, aligned(4)));
+
+/*
+ * brief the data structure of SATA Start Command
+ * use to describe MPI SATA IO Start Command (64 bytes)
+ */
+
+struct sata_start_req {
+ __le32 tag;
+ __le32 device_id;
+ __le32 data_len;
+ __le32 ncqtag_atap_dir_m;
+ struct host_to_dev_fis sata_fis;
+ u32 reserved1;
+ u32 reserved2;
+ u32 addr_low;
+ u32 addr_high;
+ __le32 len;
+ __le32 esgl;
+} __attribute__((packed, aligned(4)));
+
+/**
+ * brief the data structure of SSP INI TM Start Command
+ * use to describe MPI SSP INI TM Start Command (64 bytes)
+ */
+struct ssp_ini_tm_start_req {
+ __le32 tag;
+ __le32 device_id;
+ __le32 relate_tag;
+ __le32 tmf;
+ u8 lun[8];
+ __le32 ds_ads_m;
+ u32 reserved[8];
+} __attribute__((packed, aligned(4)));
+
+
+struct ssp_info_unit {
+ u8 lun[8];/* SCSI Logical Unit Number */
+ u8 reserved1;/* reserved */
+ u8 efb_prio_attr;
+ /* B7 : enabledFirstBurst */
+ /* B6-3 : taskPriority */
+ /* B2-0 : taskAttribute */
+ u8 reserved2; /* reserved */
+ u8 additional_cdb_len;
+ /* B7-2 : additional_cdb_len */
+ /* B1-0 : reserved */
+ u8 cdb[16];/* The SCSI CDB up to 16 bytes length */
+} __attribute__((packed, aligned(4)));
+
+
+/**
+ * brief the data structure of SSP INI IO Start Command
+ * use to describe MPI SSP INI IO Start Command (64 bytes)
+ */
+struct ssp_ini_io_start_req {
+ __le32 tag;
+ __le32 device_id;
+ __le32 data_len;
+ __le32 dir_m_tlr;
+ struct ssp_info_unit ssp_iu;
+ __le32 addr_low;
+ __le32 addr_high;
+ __le32 len;
+ __le32 esgl;
+} __attribute__((packed, aligned(4)));
+
+
+/**
+ * brief the data structure of Firmware download
+ * use to describe MPI FW DOWNLOAD Command (64 bytes)
+ */
+struct fw_flash_Update_req {
+ __le32 tag;
+ __le32 cur_image_offset;
+ __le32 cur_image_len;
+ __le32 total_image_len;
+ u32 reserved0[7];
+ __le32 sgl_addr_lo;
+ __le32 sgl_addr_hi;
+ __le32 len;
+ __le32 ext_reserved;
+} __attribute__((packed, aligned(4)));
+
+
+#define FWFLASH_IOMB_RESERVED_LEN 0x07
+/**
+ * brief the data structure of FW_FLASH_UPDATE Response
+ * use to describe MPI FW_FLASH_UPDATE Response (64 bytes)
+ *
+ */
+struct fw_flash_Update_resp {
+ dma_addr_t tag;
+ __le32 status;
+ u32 reserved[13];
+} __attribute__((packed, aligned(4)));
+
+
+/**
+ * brief the data structure of Get NVM Data Command
+ * use to get data from NVM in HBA(64 bytes)
+ */
+struct get_nvm_data_req {
+ __le32 tag;
+ __le32 len_ir_vpdd;
+ __le32 vpd_offset;
+ u32 reserved[8];
+ __le32 resp_addr_lo;
+ __le32 resp_addr_hi;
+ __le32 resp_len;
+ u32 reserved1;
+} __attribute__((packed, aligned(4)));
+
+
+struct set_nvm_data_req {
+ __le32 tag;
+ __le32 len_ir_vpdd;
+ __le32 vpd_offset;
+ u32 reserved[8];
+ __le32 resp_addr_lo;
+ __le32 resp_addr_hi;
+ __le32 resp_len;
+ u32 reserved1;
+} __attribute__((packed, aligned(4)));
+
+
+#define TWI_DEVICE 0x0
+#define C_SEEPROM 0x1
+#define VPD_FLASH 0x4
+#define AAP1_RDUMP 0x5
+#define IOP_RDUMP 0x6
+#define EXPAN_ROM 0x7
+
+#define IPMode 0x80000000
+#define NVMD_TYPE 0x0000000F
+#define NVMD_STAT 0x0000FFFF
+#define NVMD_LEN 0xFF000000
+/**
+ * brief the data structure of Get NVMD Data Response
+ * use to describe MPI Get NVMD Data Response (64 bytes)
+ */
+struct get_nvm_data_resp {
+ __le32 tag;
+ __le32 ir_tda_bn_dps_das_nvm;
+ __le32 dlen_status;
+ __le32 nvm_data[12];
+} __attribute__((packed, aligned(4)));
+
+
+/**
+ * brief the data structure of SAS Diagnostic Start/End Response
+ * use to describe MPI SAS Diagnostic Start/End Response (64 bytes)
+ *
+ */
+struct sas_diag_start_end_resp {
+ __le32 tag;
+ __le32 status;
+ u32 reserved[13];
+} __attribute__((packed, aligned(4)));
+
+
+/**
+ * brief the data structure of SAS Diagnostic Execute Response
+ * use to describe MPI SAS Diagnostic Execute Response (64 bytes)
+ *
+ */
+struct sas_diag_execute_resp {
+ __le32 tag;
+ __le32 cmdtype_cmddesc_phyid;
+ __le32 Status;
+ __le32 ReportData;
+ u32 reserved[11];
+} __attribute__((packed, aligned(4)));
+
+
+/**
+ * brief the data structure of Set Device State Response
+ * use to describe MPI Set Device State Response (64 bytes)
+ *
+ */
+struct set_dev_state_resp {
+ __le32 tag;
+ __le32 status;
+ __le32 device_id;
+ __le32 pds_nds;
+ u32 reserved[11];
+} __attribute__((packed, aligned(4)));
+
+
+#define NDS_BITS 0x0F
+#define PDS_BITS 0xF0
+
+/*
+ * HW Events type
+ */
+
+#define HW_EVENT_RESET_START 0x01
+#define HW_EVENT_CHIP_RESET_COMPLETE 0x02
+#define HW_EVENT_PHY_STOP_STATUS 0x03
+#define HW_EVENT_SAS_PHY_UP 0x04
+#define HW_EVENT_SATA_PHY_UP 0x05
+#define HW_EVENT_SATA_SPINUP_HOLD 0x06
+#define HW_EVENT_PHY_DOWN 0x07
+#define HW_EVENT_PORT_INVALID 0x08
+#define HW_EVENT_BROADCAST_CHANGE 0x09
+#define HW_EVENT_PHY_ERROR 0x0A
+#define HW_EVENT_BROADCAST_SES 0x0B
+#define HW_EVENT_INBOUND_CRC_ERROR 0x0C
+#define HW_EVENT_HARD_RESET_RECEIVED 0x0D
+#define HW_EVENT_MALFUNCTION 0x0E
+#define HW_EVENT_ID_FRAME_TIMEOUT 0x0F
+#define HW_EVENT_BROADCAST_EXP 0x10
+#define HW_EVENT_PHY_START_STATUS 0x11
+#define HW_EVENT_LINK_ERR_INVALID_DWORD 0x12
+#define HW_EVENT_LINK_ERR_DISPARITY_ERROR 0x13
+#define HW_EVENT_LINK_ERR_CODE_VIOLATION 0x14
+#define HW_EVENT_LINK_ERR_LOSS_OF_DWORD_SYNCH 0x15
+#define HW_EVENT_LINK_ERR_PHY_RESET_FAILED 0x16
+#define HW_EVENT_PORT_RECOVERY_TIMER_TMO 0x17
+#define HW_EVENT_PORT_RECOVER 0x18
+#define HW_EVENT_PORT_RESET_TIMER_TMO 0x19
+#define HW_EVENT_PORT_RESET_COMPLETE 0x20
+#define EVENT_BROADCAST_ASYNCH_EVENT 0x21
+
+/* port state */
+#define PORT_NOT_ESTABLISHED 0x00
+#define PORT_VALID 0x01
+#define PORT_LOSTCOMM 0x02
+#define PORT_IN_RESET 0x04
+#define PORT_INVALID 0x08
+
+/*
+ * SSP/SMP/SATA IO Completion Status values
+ */
+
+#define IO_SUCCESS 0x00
+#define IO_ABORTED 0x01
+#define IO_OVERFLOW 0x02
+#define IO_UNDERFLOW 0x03
+#define IO_FAILED 0x04
+#define IO_ABORT_RESET 0x05
+#define IO_NOT_VALID 0x06
+#define IO_NO_DEVICE 0x07
+#define IO_ILLEGAL_PARAMETER 0x08
+#define IO_LINK_FAILURE 0x09
+#define IO_PROG_ERROR 0x0A
+#define IO_EDC_IN_ERROR 0x0B
+#define IO_EDC_OUT_ERROR 0x0C
+#define IO_ERROR_HW_TIMEOUT 0x0D
+#define IO_XFER_ERROR_BREAK 0x0E
+#define IO_XFER_ERROR_PHY_NOT_READY 0x0F
+#define IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED 0x10
+#define IO_OPEN_CNX_ERROR_ZONE_VIOLATION 0x11
+#define IO_OPEN_CNX_ERROR_BREAK 0x12
+#define IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS 0x13
+#define IO_OPEN_CNX_ERROR_BAD_DESTINATION 0x14
+#define IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED 0x15
+#define IO_OPEN_CNX_ERROR_STP_RESOURCES_BUSY 0x16
+#define IO_OPEN_CNX_ERROR_WRONG_DESTINATION 0x17
+#define IO_OPEN_CNX_ERROR_UNKNOWN_ERROR 0x18
+#define IO_XFER_ERROR_NAK_RECEIVED 0x19
+#define IO_XFER_ERROR_ACK_NAK_TIMEOUT 0x1A
+#define IO_XFER_ERROR_PEER_ABORTED 0x1B
+#define IO_XFER_ERROR_RX_FRAME 0x1C
+#define IO_XFER_ERROR_DMA 0x1D
+#define IO_XFER_ERROR_CREDIT_TIMEOUT 0x1E
+#define IO_XFER_ERROR_SATA_LINK_TIMEOUT 0x1F
+#define IO_XFER_ERROR_SATA 0x20
+#define IO_XFER_ERROR_ABORTED_DUE_TO_SRST 0x22
+#define IO_XFER_ERROR_REJECTED_NCQ_MODE 0x21
+#define IO_XFER_ERROR_ABORTED_NCQ_MODE 0x23
+#define IO_XFER_OPEN_RETRY_TIMEOUT 0x24
+#define IO_XFER_SMP_RESP_CONNECTION_ERROR 0x25
+#define IO_XFER_ERROR_UNEXPECTED_PHASE 0x26
+#define IO_XFER_ERROR_XFER_RDY_OVERRUN 0x27
+#define IO_XFER_ERROR_XFER_RDY_NOT_EXPECTED 0x28
+
+#define IO_XFER_ERROR_CMD_ISSUE_ACK_NAK_TIMEOUT 0x30
+#define IO_XFER_ERROR_CMD_ISSUE_BREAK_BEFORE_ACK_NAK 0x31
+#define IO_XFER_ERROR_CMD_ISSUE_PHY_DOWN_BEFORE_ACK_NAK 0x32
+
+#define IO_XFER_ERROR_OFFSET_MISMATCH 0x34
+#define IO_XFER_ERROR_XFER_ZERO_DATA_LEN 0x35
+#define IO_XFER_CMD_FRAME_ISSUED 0x36
+#define IO_ERROR_INTERNAL_SMP_RESOURCE 0x37
+#define IO_PORT_IN_RESET 0x38
+#define IO_DS_NON_OPERATIONAL 0x39
+#define IO_DS_IN_RECOVERY 0x3A
+#define IO_TM_TAG_NOT_FOUND 0x3B
+#define IO_XFER_PIO_SETUP_ERROR 0x3C
+#define IO_SSP_EXT_IU_ZERO_LEN_ERROR 0x3D
+#define IO_DS_IN_ERROR 0x3E
+#define IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY 0x3F
+#define IO_ABORT_IN_PROGRESS 0x40
+#define IO_ABORT_DELAYED 0x41
+#define IO_INVALID_LENGTH 0x42
+
+/* WARNING: This error code must always be the last number.
+ * If you add error code, modify this code also
+ * It is used as an index
+ */
+#define IO_ERROR_UNKNOWN_GENERIC 0x43
+
+/* MSGU CONFIGURATION TABLE*/
+
+#define SPC_MSGU_CFG_TABLE_UPDATE 0x01/* Inbound doorbell bit0 */
+#define SPC_MSGU_CFG_TABLE_RESET 0x02/* Inbound doorbell bit1 */
+#define SPC_MSGU_CFG_TABLE_FREEZE 0x04/* Inbound doorbell bit2 */
+#define SPC_MSGU_CFG_TABLE_UNFREEZE 0x08/* Inbound doorbell bit4 */
+#define MSGU_IBDB_SET 0x04
+#define MSGU_HOST_INT_STATUS 0x08
+#define MSGU_HOST_INT_MASK 0x0C
+#define MSGU_IOPIB_INT_STATUS 0x18
+#define MSGU_IOPIB_INT_MASK 0x1C
+#define MSGU_IBDB_CLEAR 0x20/* RevB - Host not use */
+#define MSGU_MSGU_CONTROL 0x24
+#define MSGU_ODR 0x3C/* RevB */
+#define MSGU_ODCR 0x40/* RevB */
+#define MSGU_SCRATCH_PAD_0 0x44
+#define MSGU_SCRATCH_PAD_1 0x48
+#define MSGU_SCRATCH_PAD_2 0x4C
+#define MSGU_SCRATCH_PAD_3 0x50
+#define MSGU_HOST_SCRATCH_PAD_0 0x54
+#define MSGU_HOST_SCRATCH_PAD_1 0x58
+#define MSGU_HOST_SCRATCH_PAD_2 0x5C
+#define MSGU_HOST_SCRATCH_PAD_3 0x60
+#define MSGU_HOST_SCRATCH_PAD_4 0x64
+#define MSGU_HOST_SCRATCH_PAD_5 0x68
+#define MSGU_HOST_SCRATCH_PAD_6 0x6C
+#define MSGU_HOST_SCRATCH_PAD_7 0x70
+#define MSGU_ODMR 0x74/* RevB */
+
+/* bit definition for ODMR register */
+#define ODMR_MASK_ALL 0xFFFFFFFF/* mask all
+ interrupt vector */
+#define ODMR_CLEAR_ALL 0/* clear all
+ interrupt vector */
+/* bit definition for ODCR register */
+#define ODCR_CLEAR_ALL 0xFFFFFFFF /* mask all
+ interrupt vector*/
+/* MSIX Interupts */
+#define MSIX_TABLE_OFFSET 0x2000
+#define MSIX_TABLE_ELEMENT_SIZE 0x10
+#define MSIX_INTERRUPT_CONTROL_OFFSET 0xC
+#define MSIX_TABLE_BASE (MSIX_TABLE_OFFSET + MSIX_INTERRUPT_CONTROL_OFFSET)
+#define MSIX_INTERRUPT_DISABLE 0x1
+#define MSIX_INTERRUPT_ENABLE 0x0
+
+
+/* state definition for Scratch Pad1 register */
+#define SCRATCH_PAD1_POR 0x00 /* power on reset state */
+#define SCRATCH_PAD1_SFR 0x01 /* soft reset state */
+#define SCRATCH_PAD1_ERR 0x02 /* error state */
+#define SCRATCH_PAD1_RDY 0x03 /* ready state */
+#define SCRATCH_PAD1_RST 0x04 /* soft reset toggle flag */
+#define SCRATCH_PAD1_AAP1RDY_RST 0x08 /* AAP1 ready for soft reset */
+#define SCRATCH_PAD1_STATE_MASK 0xFFFFFFF0 /* ScratchPad1
+ Mask, bit1-0 State, bit2 Soft Reset, bit3 FW RDY for Soft Reset */
+#define SCRATCH_PAD1_RESERVED 0x000003F8 /* Scratch Pad1
+ Reserved bit 3 to 9 */
+
+ /* state definition for Scratch Pad2 register */
+#define SCRATCH_PAD2_POR 0x00 /* power on state */
+#define SCRATCH_PAD2_SFR 0x01 /* soft reset state */
+#define SCRATCH_PAD2_ERR 0x02 /* error state */
+#define SCRATCH_PAD2_RDY 0x03 /* ready state */
+#define SCRATCH_PAD2_FWRDY_RST 0x04 /* FW ready for soft reset flag*/
+#define SCRATCH_PAD2_IOPRDY_RST 0x08 /* IOP ready for soft reset */
+#define SCRATCH_PAD2_STATE_MASK 0xFFFFFFF4 /* ScratchPad 2
+ Mask, bit1-0 State */
+#define SCRATCH_PAD2_RESERVED 0x000003FC /* Scratch Pad1
+ Reserved bit 2 to 9 */
+
+#define SCRATCH_PAD_ERROR_MASK 0xFFFFFC00 /* Error mask bits */
+#define SCRATCH_PAD_STATE_MASK 0x00000003 /* State Mask bits */
+
+/* main configuration offset - byte offset */
+#define MAIN_SIGNATURE_OFFSET 0x00/* DWORD 0x00 */
+#define MAIN_INTERFACE_REVISION 0x04/* DWORD 0x01 */
+#define MAIN_FW_REVISION 0x08/* DWORD 0x02 */
+#define MAIN_MAX_OUTSTANDING_IO_OFFSET 0x0C/* DWORD 0x03 */
+#define MAIN_MAX_SGL_OFFSET 0x10/* DWORD 0x04 */
+#define MAIN_CNTRL_CAP_OFFSET 0x14/* DWORD 0x05 */
+#define MAIN_GST_OFFSET 0x18/* DWORD 0x06 */
+#define MAIN_IBQ_OFFSET 0x1C/* DWORD 0x07 */
+#define MAIN_OBQ_OFFSET 0x20/* DWORD 0x08 */
+#define MAIN_IQNPPD_HPPD_OFFSET 0x24/* DWORD 0x09 */
+#define MAIN_OB_HW_EVENT_PID03_OFFSET 0x28/* DWORD 0x0A */
+#define MAIN_OB_HW_EVENT_PID47_OFFSET 0x2C/* DWORD 0x0B */
+#define MAIN_OB_NCQ_EVENT_PID03_OFFSET 0x30/* DWORD 0x0C */
+#define MAIN_OB_NCQ_EVENT_PID47_OFFSET 0x34/* DWORD 0x0D */
+#define MAIN_TITNX_EVENT_PID03_OFFSET 0x38/* DWORD 0x0E */
+#define MAIN_TITNX_EVENT_PID47_OFFSET 0x3C/* DWORD 0x0F */
+#define MAIN_OB_SSP_EVENT_PID03_OFFSET 0x40/* DWORD 0x10 */
+#define MAIN_OB_SSP_EVENT_PID47_OFFSET 0x44/* DWORD 0x11 */
+#define MAIN_OB_SMP_EVENT_PID03_OFFSET 0x48/* DWORD 0x12 */
+#define MAIN_OB_SMP_EVENT_PID47_OFFSET 0x4C/* DWORD 0x13 */
+#define MAIN_EVENT_LOG_ADDR_HI 0x50/* DWORD 0x14 */
+#define MAIN_EVENT_LOG_ADDR_LO 0x54/* DWORD 0x15 */
+#define MAIN_EVENT_LOG_BUFF_SIZE 0x58/* DWORD 0x16 */
+#define MAIN_EVENT_LOG_OPTION 0x5C/* DWORD 0x17 */
+#define MAIN_IOP_EVENT_LOG_ADDR_HI 0x60/* DWORD 0x18 */
+#define MAIN_IOP_EVENT_LOG_ADDR_LO 0x64/* DWORD 0x19 */
+#define MAIN_IOP_EVENT_LOG_BUFF_SIZE 0x68/* DWORD 0x1A */
+#define MAIN_IOP_EVENT_LOG_OPTION 0x6C/* DWORD 0x1B */
+#define MAIN_FATAL_ERROR_INTERRUPT 0x70/* DWORD 0x1C */
+#define MAIN_FATAL_ERROR_RDUMP0_OFFSET 0x74/* DWORD 0x1D */
+#define MAIN_FATAL_ERROR_RDUMP0_LENGTH 0x78/* DWORD 0x1E */
+#define MAIN_FATAL_ERROR_RDUMP1_OFFSET 0x7C/* DWORD 0x1F */
+#define MAIN_FATAL_ERROR_RDUMP1_LENGTH 0x80/* DWORD 0x20 */
+#define MAIN_HDA_FLAGS_OFFSET 0x84/* DWORD 0x21 */
+#define MAIN_ANALOG_SETUP_OFFSET 0x88/* DWORD 0x22 */
+
+/* Gereral Status Table offset - byte offset */
+#define GST_GSTLEN_MPIS_OFFSET 0x00
+#define GST_IQ_FREEZE_STATE0_OFFSET 0x04
+#define GST_IQ_FREEZE_STATE1_OFFSET 0x08
+#define GST_MSGUTCNT_OFFSET 0x0C
+#define GST_IOPTCNT_OFFSET 0x10
+#define GST_PHYSTATE_OFFSET 0x18
+#define GST_PHYSTATE0_OFFSET 0x18
+#define GST_PHYSTATE1_OFFSET 0x1C
+#define GST_PHYSTATE2_OFFSET 0x20
+#define GST_PHYSTATE3_OFFSET 0x24
+#define GST_PHYSTATE4_OFFSET 0x28
+#define GST_PHYSTATE5_OFFSET 0x2C
+#define GST_PHYSTATE6_OFFSET 0x30
+#define GST_PHYSTATE7_OFFSET 0x34
+#define GST_RERRINFO_OFFSET 0x44
+
+/* General Status Table - MPI state */
+#define GST_MPI_STATE_UNINIT 0x00
+#define GST_MPI_STATE_INIT 0x01
+#define GST_MPI_STATE_TERMINATION 0x02
+#define GST_MPI_STATE_ERROR 0x03
+#define GST_MPI_STATE_MASK 0x07
+
+#define MBIC_NMI_ENABLE_VPE0_IOP 0x000418
+#define MBIC_NMI_ENABLE_VPE0_AAP1 0x000418
+/* PCIE registers - BAR2(0x18), BAR1(win) 0x010000 */
+#define PCIE_EVENT_INTERRUPT_ENABLE 0x003040
+#define PCIE_EVENT_INTERRUPT 0x003044
+#define PCIE_ERROR_INTERRUPT_ENABLE 0x003048
+#define PCIE_ERROR_INTERRUPT 0x00304C
+/* signature defintion for host scratch pad0 register */
+#define SPC_SOFT_RESET_SIGNATURE 0x252acbcd
+/* Signature for Soft Reset */
+
+/* SPC Reset register - BAR4(0x20), BAR2(win) (need dynamic mapping) */
+#define SPC_REG_RESET 0x000000/* reset register */
+
+/* bit difination for SPC_RESET register */
+#define SPC_REG_RESET_OSSP 0x00000001
+#define SPC_REG_RESET_RAAE 0x00000002
+#define SPC_REG_RESET_PCS_SPBC 0x00000004
+#define SPC_REG_RESET_PCS_IOP_SS 0x00000008
+#define SPC_REG_RESET_PCS_AAP1_SS 0x00000010
+#define SPC_REG_RESET_PCS_AAP2_SS 0x00000020
+#define SPC_REG_RESET_PCS_LM 0x00000040
+#define SPC_REG_RESET_PCS 0x00000080
+#define SPC_REG_RESET_GSM 0x00000100
+#define SPC_REG_RESET_DDR2 0x00010000
+#define SPC_REG_RESET_BDMA_CORE 0x00020000
+#define SPC_REG_RESET_BDMA_SXCBI 0x00040000
+#define SPC_REG_RESET_PCIE_AL_SXCBI 0x00080000
+#define SPC_REG_RESET_PCIE_PWR 0x00100000
+#define SPC_REG_RESET_PCIE_SFT 0x00200000
+#define SPC_REG_RESET_PCS_SXCBI 0x00400000
+#define SPC_REG_RESET_LMS_SXCBI 0x00800000
+#define SPC_REG_RESET_PMIC_SXCBI 0x01000000
+#define SPC_REG_RESET_PMIC_CORE 0x02000000
+#define SPC_REG_RESET_PCIE_PC_SXCBI 0x04000000
+#define SPC_REG_RESET_DEVICE 0x80000000
+
+/* registers for BAR Shifting - BAR2(0x18), BAR1(win) */
+#define SPC_IBW_AXI_TRANSLATION_LOW 0x003258
+
+#define MBIC_AAP1_ADDR_BASE 0x060000
+#define MBIC_IOP_ADDR_BASE 0x070000
+#define GSM_ADDR_BASE 0x0700000
+/* Dynamic map through Bar4 - 0x00700000 */
+#define GSM_CONFIG_RESET 0x00000000
+#define RAM_ECC_DB_ERR 0x00000018
+#define GSM_READ_ADDR_PARITY_INDIC 0x00000058
+#define GSM_WRITE_ADDR_PARITY_INDIC 0x00000060
+#define GSM_WRITE_DATA_PARITY_INDIC 0x00000068
+#define GSM_READ_ADDR_PARITY_CHECK 0x00000038
+#define GSM_WRITE_ADDR_PARITY_CHECK 0x00000040
+#define GSM_WRITE_DATA_PARITY_CHECK 0x00000048
+
+#define RB6_ACCESS_REG 0x6A0000
+#define HDAC_EXEC_CMD 0x0002
+#define HDA_C_PA 0xcb
+#define HDA_SEQ_ID_BITS 0x00ff0000
+#define HDA_GSM_OFFSET_BITS 0x00FFFFFF
+#define MBIC_AAP1_ADDR_BASE 0x060000
+#define MBIC_IOP_ADDR_BASE 0x070000
+#define GSM_ADDR_BASE 0x0700000
+#define SPC_TOP_LEVEL_ADDR_BASE 0x000000
+#define GSM_CONFIG_RESET_VALUE 0x00003b00
+#define GPIO_ADDR_BASE 0x00090000
+#define GPIO_GPIO_0_0UTPUT_CTL_OFFSET 0x0000010c
+
+/* RB6 offset */
+#define SPC_RB6_OFFSET 0x80C0
+/* Magic number of soft reset for RB6 */
+#define RB6_MAGIC_NUMBER_RST 0x1234
+
+/* Device Register status */
+#define DEVREG_SUCCESS 0x00
+#define DEVREG_FAILURE_OUT_OF_RESOURCE 0x01
+#define DEVREG_FAILURE_DEVICE_ALREADY_REGISTERED 0x02
+#define DEVREG_FAILURE_INVALID_PHY_ID 0x03
+#define DEVREG_FAILURE_PHY_ID_ALREADY_REGISTERED 0x04
+#define DEVREG_FAILURE_PORT_ID_OUT_OF_RANGE 0x05
+#define DEVREG_FAILURE_PORT_NOT_VALID_STATE 0x06
+#define DEVREG_FAILURE_DEVICE_TYPE_NOT_VALID 0x07
+
+#endif
+
diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c
new file mode 100644
index 0000000..42ebe72
--- /dev/null
+++ b/drivers/scsi/pm8001/pm8001_init.c
@@ -0,0 +1,891 @@
+/*
+ * PMC-Sierra SPC 8001 SAS/SATA based host adapters driver
+ *
+ * Copyright (c) 2008-2009 USI Co., Ltd.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * substantially similar to the "NO WARRANTY" disclaimer below
+ * ("Disclaimer") and any redistribution must be conditioned upon
+ * including a substantially similar Disclaimer requirement for further
+ * binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ *
+ */
+
+#include "pm8001_sas.h"
+#include "pm8001_chips.h"
+
+static struct scsi_transport_template *pm8001_stt;
+
+static const struct pm8001_chip_info pm8001_chips[] = {
+ [chip_8001] = { 8, &pm8001_8001_dispatch,},
+};
+static int pm8001_id;
+
+LIST_HEAD(hba_list);
+
+/**
+ * The main structure which LLDD must register for scsi core.
+ */
+static struct scsi_host_template pm8001_sht = {
+ .module = THIS_MODULE,
+ .name = DRV_NAME,
+ .queuecommand = sas_queuecommand,
+ .target_alloc = sas_target_alloc,
+ .slave_configure = pm8001_slave_configure,
+ .slave_destroy = sas_slave_destroy,
+ .scan_finished = pm8001_scan_finished,
+ .scan_start = pm8001_scan_start,
+ .change_queue_depth = sas_change_queue_depth,
+ .change_queue_type = sas_change_queue_type,
+ .bios_param = sas_bios_param,
+ .can_queue = 1,
+ .cmd_per_lun = 1,
+ .this_id = -1,
+ .sg_tablesize = SG_ALL,
+ .max_sectors = SCSI_DEFAULT_MAX_SECTORS,
+ .use_clustering = ENABLE_CLUSTERING,
+ .eh_device_reset_handler = sas_eh_device_reset_handler,
+ .eh_bus_reset_handler = sas_eh_bus_reset_handler,
+ .slave_alloc = pm8001_slave_alloc,
+ .target_destroy = sas_target_destroy,
+ .ioctl = sas_ioctl,
+ .shost_attrs = pm8001_host_attrs,
+};
+
+/**
+ * Sas layer call this function to execute specific task.
+ */
+static struct sas_domain_function_template pm8001_transport_ops = {
+ .lldd_dev_found = pm8001_dev_found,
+ .lldd_dev_gone = pm8001_dev_gone,
+
+ .lldd_execute_task = pm8001_queue_command,
+ .lldd_control_phy = pm8001_phy_control,
+
+ .lldd_abort_task = pm8001_abort_task,
+ .lldd_abort_task_set = pm8001_abort_task_set,
+ .lldd_clear_aca = pm8001_clear_aca,
+ .lldd_clear_task_set = pm8001_clear_task_set,
+ .lldd_I_T_nexus_reset = pm8001_I_T_nexus_reset,
+ .lldd_lu_reset = pm8001_lu_reset,
+ .lldd_query_task = pm8001_query_task,
+};
+
+/**
+ *pm8001_phy_init - initiate our adapter phys
+ *@pm8001_ha: our hba structure.
+ *@phy_id: phy id.
+ */
+static void __devinit pm8001_phy_init(struct pm8001_hba_info *pm8001_ha,
+ int phy_id)
+{
+ struct pm8001_phy *phy = &pm8001_ha->phy[phy_id];
+ struct asd_sas_phy *sas_phy = &phy->sas_phy;
+ phy->phy_state = 0;
+ phy->pm8001_ha = pm8001_ha;
+ sas_phy->enabled = (phy_id < pm8001_ha->chip->n_phy) ? 1 : 0;
+ sas_phy->class = SAS;
+ sas_phy->iproto = SAS_PROTOCOL_ALL;
+ sas_phy->tproto = 0;
+ sas_phy->type = PHY_TYPE_PHYSICAL;
+ sas_phy->role = PHY_ROLE_INITIATOR;
+ sas_phy->oob_mode = OOB_NOT_CONNECTED;
+ sas_phy->linkrate = SAS_LINK_RATE_UNKNOWN;
+ sas_phy->id = phy_id;
+ sas_phy->sas_addr = &pm8001_ha->sas_addr[0];
+ sas_phy->frame_rcvd = &phy->frame_rcvd[0];
+ sas_phy->ha = (struct sas_ha_struct *)pm8001_ha->shost->hostdata;
+ sas_phy->lldd_phy = phy;
+}
+
+/**
+ *pm8001_free - free hba
+ *@pm8001_ha: our hba structure.
+ *
+ */
+static void pm8001_free(struct pm8001_hba_info *pm8001_ha)
+{
+ int i;
+ struct pm8001_wq *wq;
+
+ if (!pm8001_ha)
+ return;
+
+ for (i = 0; i < USI_MAX_MEMCNT; i++) {
+ if (pm8001_ha->memoryMap.region[i].virt_ptr != NULL) {
+ pci_free_consistent(pm8001_ha->pdev,
+ pm8001_ha->memoryMap.region[i].element_size,
+ pm8001_ha->memoryMap.region[i].virt_ptr,
+ pm8001_ha->memoryMap.region[i].phys_addr);
+ }
+ }
+ PM8001_CHIP_DISP->chip_iounmap(pm8001_ha);
+ if (pm8001_ha->shost)
+ scsi_host_put(pm8001_ha->shost);
+ list_for_each_entry(wq, &pm8001_ha->wq_list, entry)
+ cancel_delayed_work(&wq->work_q);
+ kfree(pm8001_ha->tags);
+ kfree(pm8001_ha);
+}
+
+#ifdef PM8001_USE_TASKLET
+static void pm8001_tasklet(unsigned long opaque)
+{
+ struct pm8001_hba_info *pm8001_ha;
+ pm8001_ha = (struct pm8001_hba_info *)opaque;;
+ if (unlikely(!pm8001_ha))
+ BUG_ON(1);
+ PM8001_CHIP_DISP->isr(pm8001_ha);
+}
+#endif
+
+
+ /**
+ * pm8001_interrupt - when HBA originate a interrupt,we should invoke this
+ * dispatcher to handle each case.
+ * @irq: irq number.
+ * @opaque: the passed general host adapter struct
+ */
+static irqreturn_t pm8001_interrupt(int irq, void *opaque)
+{
+ struct pm8001_hba_info *pm8001_ha;
+ irqreturn_t ret = IRQ_HANDLED;
+ struct sas_ha_struct *sha = opaque;
+ pm8001_ha = sha->lldd_ha;
+ if (unlikely(!pm8001_ha))
+ return IRQ_NONE;
+ if (!PM8001_CHIP_DISP->is_our_interupt(pm8001_ha))
+ return IRQ_NONE;
+#ifdef PM8001_USE_TASKLET
+ tasklet_schedule(&pm8001_ha->tasklet);
+#else
+ ret = PM8001_CHIP_DISP->isr(pm8001_ha);
+#endif
+ return ret;
+}
+
+/**
+ * pm8001_alloc - initiate our hba structure and 6 DMAs area.
+ * @pm8001_ha:our hba structure.
+ *
+ */
+static int __devinit pm8001_alloc(struct pm8001_hba_info *pm8001_ha)
+{
+ int i;
+ spin_lock_init(&pm8001_ha->lock);
+ for (i = 0; i < pm8001_ha->chip->n_phy; i++)
+ pm8001_phy_init(pm8001_ha, i);
+
+ pm8001_ha->tags = kzalloc(PM8001_MAX_CCB, GFP_KERNEL);
+ if (!pm8001_ha->tags)
+ goto err_out;
+ /* MPI Memory region 1 for AAP Event Log for fw */
+ pm8001_ha->memoryMap.region[AAP1].num_elements = 1;
+ pm8001_ha->memoryMap.region[AAP1].element_size = PM8001_EVENT_LOG_SIZE;
+ pm8001_ha->memoryMap.region[AAP1].total_len = PM8001_EVENT_LOG_SIZE;
+ pm8001_ha->memoryMap.region[AAP1].alignment = 32;
+
+ /* MPI Memory region 2 for IOP Event Log for fw */
+ pm8001_ha->memoryMap.region[IOP].num_elements = 1;
+ pm8001_ha->memoryMap.region[IOP].element_size = PM8001_EVENT_LOG_SIZE;
+ pm8001_ha->memoryMap.region[IOP].total_len = PM8001_EVENT_LOG_SIZE;
+ pm8001_ha->memoryMap.region[IOP].alignment = 32;
+
+ /* MPI Memory region 3 for consumer Index of inbound queues */
+ pm8001_ha->memoryMap.region[CI].num_elements = 1;
+ pm8001_ha->memoryMap.region[CI].element_size = 4;
+ pm8001_ha->memoryMap.region[CI].total_len = 4;
+ pm8001_ha->memoryMap.region[CI].alignment = 4;
+
+ /* MPI Memory region 4 for producer Index of outbound queues */
+ pm8001_ha->memoryMap.region[PI].num_elements = 1;
+ pm8001_ha->memoryMap.region[PI].element_size = 4;
+ pm8001_ha->memoryMap.region[PI].total_len = 4;
+ pm8001_ha->memoryMap.region[PI].alignment = 4;
+
+ /* MPI Memory region 5 inbound queues */
+ pm8001_ha->memoryMap.region[IB].num_elements = 256;
+ pm8001_ha->memoryMap.region[IB].element_size = 64;
+ pm8001_ha->memoryMap.region[IB].total_len = 256 * 64;
+ pm8001_ha->memoryMap.region[IB].alignment = 64;
+
+ /* MPI Memory region 6 inbound queues */
+ pm8001_ha->memoryMap.region[OB].num_elements = 256;
+ pm8001_ha->memoryMap.region[OB].element_size = 64;
+ pm8001_ha->memoryMap.region[OB].total_len = 256 * 64;
+ pm8001_ha->memoryMap.region[OB].alignment = 64;
+
+ /* Memory region write DMA*/
+ pm8001_ha->memoryMap.region[NVMD].num_elements = 1;
+ pm8001_ha->memoryMap.region[NVMD].element_size = 4096;
+ pm8001_ha->memoryMap.region[NVMD].total_len = 4096;
+ /* Memory region for devices*/
+ pm8001_ha->memoryMap.region[DEV_MEM].num_elements = 1;
+ pm8001_ha->memoryMap.region[DEV_MEM].element_size = PM8001_MAX_DEVICES *
+ sizeof(struct pm8001_device);
+ pm8001_ha->memoryMap.region[DEV_MEM].total_len = PM8001_MAX_DEVICES *
+ sizeof(struct pm8001_device);
+
+ /* Memory region for ccb_info*/
+ pm8001_ha->memoryMap.region[CCB_MEM].num_elements = 1;
+ pm8001_ha->memoryMap.region[CCB_MEM].element_size = PM8001_MAX_CCB *
+ sizeof(struct pm8001_ccb_info);
+ pm8001_ha->memoryMap.region[CCB_MEM].total_len = PM8001_MAX_CCB *
+ sizeof(struct pm8001_ccb_info);
+
+ for (i = 0; i < USI_MAX_MEMCNT; i++) {
+ if (pm8001_mem_alloc(pm8001_ha->pdev,
+ &pm8001_ha->memoryMap.region[i].virt_ptr,
+ &pm8001_ha->memoryMap.region[i].phys_addr,
+ &pm8001_ha->memoryMap.region[i].phys_addr_hi,
+ &pm8001_ha->memoryMap.region[i].phys_addr_lo,
+ pm8001_ha->memoryMap.region[i].total_len,
+ pm8001_ha->memoryMap.region[i].alignment) != 0) {
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("Mem%d alloc failed\n",
+ i));
+ goto err_out;
+ }
+ }
+
+ pm8001_ha->devices = pm8001_ha->memoryMap.region[DEV_MEM].virt_ptr;
+ for (i = 0; i < PM8001_MAX_DEVICES; i++) {
+ pm8001_ha->devices[i].dev_type = NO_DEVICE;
+ pm8001_ha->devices[i].id = i;
+ pm8001_ha->devices[i].device_id = PM8001_MAX_DEVICES;
+ pm8001_ha->devices[i].running_req = 0;
+ }
+ pm8001_ha->ccb_info = pm8001_ha->memoryMap.region[CCB_MEM].virt_ptr;
+ for (i = 0; i < PM8001_MAX_CCB; i++) {
+ pm8001_ha->ccb_info[i].ccb_dma_handle =
+ pm8001_ha->memoryMap.region[CCB_MEM].phys_addr +
+ i * sizeof(struct pm8001_ccb_info);
+ pm8001_ha->ccb_info[i].task = NULL;
+ pm8001_ha->ccb_info[i].ccb_tag = 0xffffffff;
+ pm8001_ha->ccb_info[i].device = NULL;
+ ++pm8001_ha->tags_num;
+ }
+ pm8001_ha->flags = PM8001F_INIT_TIME;
+ /* Initialize tags */
+ pm8001_tag_init(pm8001_ha);
+ return 0;
+err_out:
+ return 1;
+}
+
+/**
+ * pm8001_ioremap - remap the pci high physical address to kernal virtual
+ * address so that we can access them.
+ * @pm8001_ha:our hba structure.
+ */
+static int pm8001_ioremap(struct pm8001_hba_info *pm8001_ha)
+{
+ u32 bar;
+ u32 logicalBar = 0;
+ struct pci_dev *pdev;
+
+ pdev = pm8001_ha->pdev;
+ /* map pci mem (PMC pci base 0-3)*/
+ for (bar = 0; bar < 6; bar++) {
+ /*
+ ** logical BARs for SPC:
+ ** bar 0 and 1 - logical BAR0
+ ** bar 2 and 3 - logical BAR1
+ ** bar4 - logical BAR2
+ ** bar5 - logical BAR3
+ ** Skip the appropriate assignments:
+ */
+ if ((bar == 1) || (bar == 3))
+ continue;
+ if (pci_resource_flags(pdev, bar) & IORESOURCE_MEM) {
+ pm8001_ha->io_mem[logicalBar].membase =
+ pci_resource_start(pdev, bar);
+ pm8001_ha->io_mem[logicalBar].membase &=
+ (u32)PCI_BASE_ADDRESS_MEM_MASK;
+ pm8001_ha->io_mem[logicalBar].memsize =
+ pci_resource_len(pdev, bar);
+ pm8001_ha->io_mem[logicalBar].memvirtaddr =
+ ioremap(pm8001_ha->io_mem[logicalBar].membase,
+ pm8001_ha->io_mem[logicalBar].memsize);
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("PCI: bar %d, logicalBar %d "
+ "virt_addr=%lx,len=%d\n", bar, logicalBar,
+ (unsigned long)
+ pm8001_ha->io_mem[logicalBar].memvirtaddr,
+ pm8001_ha->io_mem[logicalBar].memsize));
+ } else {
+ pm8001_ha->io_mem[logicalBar].membase = 0;
+ pm8001_ha->io_mem[logicalBar].memsize = 0;
+ pm8001_ha->io_mem[logicalBar].memvirtaddr = 0;
+ }
+ logicalBar++;
+ }
+ return 0;
+}
+
+/**
+ * pm8001_pci_alloc - initialize our ha card structure
+ * @pdev: pci device.
+ * @ent: ent
+ * @shost: scsi host struct which has been initialized before.
+ */
+static struct pm8001_hba_info *__devinit
+pm8001_pci_alloc(struct pci_dev *pdev, u32 chip_id, struct Scsi_Host *shost)
+{
+ struct pm8001_hba_info *pm8001_ha;
+ struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+
+
+ pm8001_ha = sha->lldd_ha;
+ if (!pm8001_ha)
+ return NULL;
+
+ pm8001_ha->pdev = pdev;
+ pm8001_ha->dev = &pdev->dev;
+ pm8001_ha->chip_id = chip_id;
+ pm8001_ha->chip = &pm8001_chips[pm8001_ha->chip_id];
+ pm8001_ha->irq = pdev->irq;
+ pm8001_ha->sas = sha;
+ pm8001_ha->shost = shost;
+ pm8001_ha->id = pm8001_id++;
+ INIT_LIST_HEAD(&pm8001_ha->wq_list);
+ pm8001_ha->logging_level = 0x01;
+ sprintf(pm8001_ha->name, "%s%d", DRV_NAME, pm8001_ha->id);
+#ifdef PM8001_USE_TASKLET
+ tasklet_init(&pm8001_ha->tasklet, pm8001_tasklet,
+ (unsigned long)pm8001_ha);
+#endif
+ pm8001_ioremap(pm8001_ha);
+ if (!pm8001_alloc(pm8001_ha))
+ return pm8001_ha;
+ pm8001_free(pm8001_ha);
+ return NULL;
+}
+
+/**
+ * pci_go_44 - pm8001 specified, its DMA is 44 bit rather than 64 bit
+ * @pdev: pci device.
+ */
+static int pci_go_44(struct pci_dev *pdev)
+{
+ int rc;
+
+ if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(44))) {
+ rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(44));
+ if (rc) {
+ rc = pci_set_consistent_dma_mask(pdev,
+ DMA_BIT_MASK(32));
+ if (rc) {
+ dev_printk(KERN_ERR, &pdev->dev,
+ "44-bit DMA enable failed\n");
+ return rc;
+ }
+ }
+ } else {
+ rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (rc) {
+ dev_printk(KERN_ERR, &pdev->dev,
+ "32-bit DMA enable failed\n");
+ return rc;
+ }
+ rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (rc) {
+ dev_printk(KERN_ERR, &pdev->dev,
+ "32-bit consistent DMA enable failed\n");
+ return rc;
+ }
+ }
+ return rc;
+}
+
+/**
+ * pm8001_prep_sas_ha_init - allocate memory in general hba struct && init them.
+ * @shost: scsi host which has been allocated outside.
+ * @chip_info: our ha struct.
+ */
+static int __devinit pm8001_prep_sas_ha_init(struct Scsi_Host * shost,
+ const struct pm8001_chip_info *chip_info)
+{
+ int phy_nr, port_nr;
+ struct asd_sas_phy **arr_phy;
+ struct asd_sas_port **arr_port;
+ struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+
+ phy_nr = chip_info->n_phy;
+ port_nr = phy_nr;
+ memset(sha, 0x00, sizeof(*sha));
+ arr_phy = kcalloc(phy_nr, sizeof(void *), GFP_KERNEL);
+ if (!arr_phy)
+ goto exit;
+ arr_port = kcalloc(port_nr, sizeof(void *), GFP_KERNEL);
+ if (!arr_port)
+ goto exit_free2;
+
+ sha->sas_phy = arr_phy;
+ sha->sas_port = arr_port;
+ sha->lldd_ha = kzalloc(sizeof(struct pm8001_hba_info), GFP_KERNEL);
+ if (!sha->lldd_ha)
+ goto exit_free1;
+
+ shost->transportt = pm8001_stt;
+ shost->max_id = PM8001_MAX_DEVICES;
+ shost->max_lun = 8;
+ shost->max_channel = 0;
+ shost->unique_id = pm8001_id;
+ shost->max_cmd_len = 16;
+ shost->can_queue = PM8001_CAN_QUEUE;
+ shost->cmd_per_lun = 32;
+ return 0;
+exit_free1:
+ kfree(arr_port);
+exit_free2:
+ kfree(arr_phy);
+exit:
+ return -1;
+}
+
+/**
+ * pm8001_post_sas_ha_init - initialize general hba struct defined in libsas
+ * @shost: scsi host which has been allocated outside
+ * @chip_info: our ha struct.
+ */
+static void __devinit pm8001_post_sas_ha_init(struct Scsi_Host *shost,
+ const struct pm8001_chip_info *chip_info)
+{
+ int i = 0;
+ struct pm8001_hba_info *pm8001_ha;
+ struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+
+ pm8001_ha = sha->lldd_ha;
+ for (i = 0; i < chip_info->n_phy; i++) {
+ sha->sas_phy[i] = &pm8001_ha->phy[i].sas_phy;
+ sha->sas_port[i] = &pm8001_ha->port[i].sas_port;
+ }
+ sha->sas_ha_name = DRV_NAME;
+ sha->dev = pm8001_ha->dev;
+
+ sha->lldd_module = THIS_MODULE;
+ sha->sas_addr = &pm8001_ha->sas_addr[0];
+ sha->num_phys = chip_info->n_phy;
+ sha->lldd_max_execute_num = 1;
+ sha->lldd_queue_size = PM8001_CAN_QUEUE;
+ sha->core.shost = shost;
+}
+
+/**
+ * pm8001_init_sas_add - initialize sas address
+ * @chip_info: our ha struct.
+ *
+ * Currently we just set the fixed SAS address to our HBA,for manufacture,
+ * it should read from the EEPROM
+ */
+static void pm8001_init_sas_add(struct pm8001_hba_info *pm8001_ha)
+{
+ u8 i;
+#ifdef PM8001_READ_VPD
+ DECLARE_COMPLETION_ONSTACK(completion);
+ pm8001_ha->nvmd_completion = &completion;
+ PM8001_CHIP_DISP->get_nvmd_req(pm8001_ha, 0, 0);
+ wait_for_completion(&completion);
+ for (i = 0; i < pm8001_ha->chip->n_phy; i++) {
+ memcpy(&pm8001_ha->phy[i].dev_sas_addr, pm8001_ha->sas_addr,
+ SAS_ADDR_SIZE);
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("phy %d sas_addr = %x \n", i,
+ (u64)pm8001_ha->phy[i].dev_sas_addr));
+ }
+#else
+ for (i = 0; i < pm8001_ha->chip->n_phy; i++) {
+ pm8001_ha->phy[i].dev_sas_addr = 0x500e004010000004ULL;
+ pm8001_ha->phy[i].dev_sas_addr =
+ cpu_to_be64((u64)
+ (*(u64 *)&pm8001_ha->phy[i].dev_sas_addr));
+ }
+ memcpy(pm8001_ha->sas_addr, &pm8001_ha->phy[0].dev_sas_addr,
+ SAS_ADDR_SIZE);
+#endif
+}
+
+#ifdef PM8001_USE_MSIX
+/**
+ * pm8001_setup_msix - enable MSI-X interrupt
+ * @chip_info: our ha struct.
+ * @irq_handler: irq_handler
+ */
+static u32 pm8001_setup_msix(struct pm8001_hba_info *pm8001_ha,
+ irq_handler_t irq_handler)
+{
+ u32 i = 0, j = 0;
+ u32 number_of_intr = 1;
+ int flag = 0;
+ u32 max_entry;
+ int rc;
+ max_entry = sizeof(pm8001_ha->msix_entries) /
+ sizeof(pm8001_ha->msix_entries[0]);
+ flag |= IRQF_DISABLED;
+ for (i = 0; i < max_entry ; i++)
+ pm8001_ha->msix_entries[i].entry = i;
+ rc = pci_enable_msix(pm8001_ha->pdev, pm8001_ha->msix_entries,
+ number_of_intr);
+ pm8001_ha->number_of_intr = number_of_intr;
+ if (!rc) {
+ for (i = 0; i < number_of_intr; i++) {
+ if (request_irq(pm8001_ha->msix_entries[i].vector,
+ irq_handler, flag, DRV_NAME,
+ SHOST_TO_SAS_HA(pm8001_ha->shost))) {
+ for (j = 0; j < i; j++)
+ free_irq(
+ pm8001_ha->msix_entries[j].vector,
+ SHOST_TO_SAS_HA(pm8001_ha->shost));
+ pci_disable_msix(pm8001_ha->pdev);
+ break;
+ }
+ }
+ }
+ return rc;
+}
+#endif
+
+/**
+ * pm8001_request_irq - register interrupt
+ * @chip_info: our ha struct.
+ */
+static u32 pm8001_request_irq(struct pm8001_hba_info *pm8001_ha)
+{
+ struct pci_dev *pdev;
+ irq_handler_t irq_handler = pm8001_interrupt;
+ int rc;
+
+ pdev = pm8001_ha->pdev;
+
+#ifdef PM8001_USE_MSIX
+ if (pci_find_capability(pdev, PCI_CAP_ID_MSIX))
+ return pm8001_setup_msix(pm8001_ha, irq_handler);
+ else
+ goto intx;
+#endif
+
+intx:
+ /* intialize the INT-X interrupt */
+ rc = request_irq(pdev->irq, irq_handler, IRQF_SHARED, DRV_NAME,
+ SHOST_TO_SAS_HA(pm8001_ha->shost));
+ return rc;
+}
+
+/**
+ * pm8001_pci_probe - probe supported device
+ * @pdev: pci device which kernel has been prepared for.
+ * @ent: pci device id
+ *
+ * This function is the main initialization function, when register a new
+ * pci driver it is invoked, all struct an hardware initilization should be done
+ * here, also, register interrupt
+ */
+static int __devinit pm8001_pci_probe(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ unsigned int rc;
+ u32 pci_reg;
+ struct pm8001_hba_info *pm8001_ha;
+ struct Scsi_Host *shost = NULL;
+ const struct pm8001_chip_info *chip;
+
+ dev_printk(KERN_INFO, &pdev->dev,
+ "pm8001: driver version %s\n", DRV_VERSION);
+ rc = pci_enable_device(pdev);
+ if (rc)
+ goto err_out_enable;
+ pci_set_master(pdev);
+ /*
+ * Enable pci slot busmaster by setting pci command register.
+ * This is required by FW for Cyclone card.
+ */
+
+ pci_read_config_dword(pdev, PCI_COMMAND, &pci_reg);
+ pci_reg |= 0x157;
+ pci_write_config_dword(pdev, PCI_COMMAND, pci_reg);
+ rc = pci_request_regions(pdev, DRV_NAME);
+ if (rc)
+ goto err_out_disable;
+ rc = pci_go_44(pdev);
+ if (rc)
+ goto err_out_regions;
+
+ shost = scsi_host_alloc(&pm8001_sht, sizeof(void *));
+ if (!shost) {
+ rc = -ENOMEM;
+ goto err_out_regions;
+ }
+ chip = &pm8001_chips[ent->driver_data];
+ SHOST_TO_SAS_HA(shost) =
+ kcalloc(1, sizeof(struct sas_ha_struct), GFP_KERNEL);
+ if (!SHOST_TO_SAS_HA(shost)) {
+ rc = -ENOMEM;
+ goto err_out_free_host;
+ }
+
+ rc = pm8001_prep_sas_ha_init(shost, chip);
+ if (rc) {
+ rc = -ENOMEM;
+ goto err_out_free;
+ }
+ pci_set_drvdata(pdev, SHOST_TO_SAS_HA(shost));
+ pm8001_ha = pm8001_pci_alloc(pdev, chip_8001, shost);
+ if (!pm8001_ha) {
+ rc = -ENOMEM;
+ goto err_out_free;
+ }
+ list_add_tail(&pm8001_ha->list, &hba_list);
+ PM8001_CHIP_DISP->chip_soft_rst(pm8001_ha, 0x252acbcd);
+ rc = PM8001_CHIP_DISP->chip_init(pm8001_ha);
+ if (rc)
+ goto err_out_ha_free;
+
+ rc = scsi_add_host(shost, &pdev->dev);
+ if (rc)
+ goto err_out_ha_free;
+ rc = pm8001_request_irq(pm8001_ha);
+ if (rc)
+ goto err_out_shost;
+
+ PM8001_CHIP_DISP->interrupt_enable(pm8001_ha);
+ pm8001_init_sas_add(pm8001_ha);
+ pm8001_post_sas_ha_init(shost, chip);
+ rc = sas_register_ha(SHOST_TO_SAS_HA(shost));
+ if (rc)
+ goto err_out_shost;
+ scsi_scan_host(pm8001_ha->shost);
+ return 0;
+
+err_out_shost:
+ scsi_remove_host(pm8001_ha->shost);
+err_out_ha_free:
+ pm8001_free(pm8001_ha);
+err_out_free:
+ kfree(SHOST_TO_SAS_HA(shost));
+err_out_free_host:
+ kfree(shost);
+err_out_regions:
+ pci_release_regions(pdev);
+err_out_disable:
+ pci_disable_device(pdev);
+err_out_enable:
+ return rc;
+}
+
+static void __devexit pm8001_pci_remove(struct pci_dev *pdev)
+{
+ struct sas_ha_struct *sha = pci_get_drvdata(pdev);
+ struct pm8001_hba_info *pm8001_ha;
+ int i;
+ pm8001_ha = sha->lldd_ha;
+ pci_set_drvdata(pdev, NULL);
+ sas_unregister_ha(sha);
+ sas_remove_host(pm8001_ha->shost);
+ list_del(&pm8001_ha->list);
+ scsi_remove_host(pm8001_ha->shost);
+ PM8001_CHIP_DISP->interrupt_disable(pm8001_ha);
+ PM8001_CHIP_DISP->chip_soft_rst(pm8001_ha, 0x252acbcd);
+
+#ifdef PM8001_USE_MSIX
+ for (i = 0; i < pm8001_ha->number_of_intr; i++)
+ synchronize_irq(pm8001_ha->msix_entries[i].vector);
+ for (i = 0; i < pm8001_ha->number_of_intr; i++)
+ free_irq(pm8001_ha->msix_entries[i].vector, sha);
+ pci_disable_msix(pdev);
+#else
+ free_irq(pm8001_ha->irq, sha);
+#endif
+#ifdef PM8001_USE_TASKLET
+ tasklet_kill(&pm8001_ha->tasklet);
+#endif
+ pm8001_free(pm8001_ha);
+ kfree(sha->sas_phy);
+ kfree(sha->sas_port);
+ kfree(sha);
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
+}
+
+/**
+ * pm8001_pci_suspend - power management suspend main entry point
+ * @pdev: PCI device struct
+ * @state: PM state change to (usually PCI_D3)
+ *
+ * Returns 0 success, anything else error.
+ */
+static int pm8001_pci_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ struct sas_ha_struct *sha = pci_get_drvdata(pdev);
+ struct pm8001_hba_info *pm8001_ha;
+ int i , pos;
+ u32 device_state;
+ pm8001_ha = sha->lldd_ha;
+ flush_scheduled_work();
+ scsi_block_requests(pm8001_ha->shost);
+ pos = pci_find_capability(pdev, PCI_CAP_ID_PM);
+ if (pos == 0) {
+ printk(KERN_ERR " PCI PM not supported\n");
+ return -ENODEV;
+ }
+ PM8001_CHIP_DISP->interrupt_disable(pm8001_ha);
+ PM8001_CHIP_DISP->chip_soft_rst(pm8001_ha, 0x252acbcd);
+#ifdef PM8001_USE_MSIX
+ for (i = 0; i < pm8001_ha->number_of_intr; i++)
+ synchronize_irq(pm8001_ha->msix_entries[i].vector);
+ for (i = 0; i < pm8001_ha->number_of_intr; i++)
+ free_irq(pm8001_ha->msix_entries[i].vector, sha);
+ pci_disable_msix(pdev);
+#else
+ free_irq(pm8001_ha->irq, sha);
+#endif
+#ifdef PM8001_USE_TASKLET
+ tasklet_kill(&pm8001_ha->tasklet);
+#endif
+ device_state = pci_choose_state(pdev, state);
+ pm8001_printk("pdev=0x%p, slot=%s, entering "
+ "operating state [D%d]\n", pdev,
+ pm8001_ha->name, device_state);
+ pci_save_state(pdev);
+ pci_disable_device(pdev);
+ pci_set_power_state(pdev, device_state);
+ return 0;
+}
+
+/**
+ * pm8001_pci_resume - power management resume main entry point
+ * @pdev: PCI device struct
+ *
+ * Returns 0 success, anything else error.
+ */
+static int pm8001_pci_resume(struct pci_dev *pdev)
+{
+ struct sas_ha_struct *sha = pci_get_drvdata(pdev);
+ struct pm8001_hba_info *pm8001_ha;
+ int rc;
+ u32 device_state;
+ pm8001_ha = sha->lldd_ha;
+ device_state = pdev->current_state;
+
+ pm8001_printk("pdev=0x%p, slot=%s, resuming from previous "
+ "operating state [D%d]\n", pdev, pm8001_ha->name, device_state);
+
+ pci_set_power_state(pdev, PCI_D0);
+ pci_enable_wake(pdev, PCI_D0, 0);
+ pci_restore_state(pdev);
+ rc = pci_enable_device(pdev);
+ if (rc) {
+ pm8001_printk("slot=%s Enable device failed during resume\n",
+ pm8001_ha->name);
+ goto err_out_enable;
+ }
+
+ pci_set_master(pdev);
+ rc = pci_go_44(pdev);
+ if (rc)
+ goto err_out_disable;
+
+ PM8001_CHIP_DISP->chip_soft_rst(pm8001_ha, 0x252acbcd);
+ rc = PM8001_CHIP_DISP->chip_init(pm8001_ha);
+ if (rc)
+ goto err_out_disable;
+ PM8001_CHIP_DISP->interrupt_disable(pm8001_ha);
+ rc = pm8001_request_irq(pm8001_ha);
+ if (rc)
+ goto err_out_disable;
+ #ifdef PM8001_USE_TASKLET
+ tasklet_init(&pm8001_ha->tasklet, pm8001_tasklet,
+ (unsigned long)pm8001_ha);
+ #endif
+ PM8001_CHIP_DISP->interrupt_enable(pm8001_ha);
+ scsi_unblock_requests(pm8001_ha->shost);
+ return 0;
+
+err_out_disable:
+ scsi_remove_host(pm8001_ha->shost);
+ pci_disable_device(pdev);
+err_out_enable:
+ return rc;
+}
+
+static struct pci_device_id __devinitdata pm8001_pci_table[] = {
+ {
+ PCI_VDEVICE(PMC_Sierra, 0x8001), chip_8001
+ },
+ {
+ PCI_DEVICE(0x117c, 0x0042),
+ .driver_data = chip_8001
+ },
+ {} /* terminate list */
+};
+
+static struct pci_driver pm8001_pci_driver = {
+ .name = DRV_NAME,
+ .id_table = pm8001_pci_table,
+ .probe = pm8001_pci_probe,
+ .remove = __devexit_p(pm8001_pci_remove),
+ .suspend = pm8001_pci_suspend,
+ .resume = pm8001_pci_resume,
+};
+
+/**
+ * pm8001_init - initialize scsi transport template
+ */
+static int __init pm8001_init(void)
+{
+ int rc;
+ pm8001_id = 0;
+ pm8001_stt = sas_domain_attach_transport(&pm8001_transport_ops);
+ if (!pm8001_stt)
+ return -ENOMEM;
+ rc = pci_register_driver(&pm8001_pci_driver);
+ if (rc)
+ goto err_out;
+ return 0;
+err_out:
+ sas_release_transport(pm8001_stt);
+ return rc;
+}
+
+static void __exit pm8001_exit(void)
+{
+ pci_unregister_driver(&pm8001_pci_driver);
+ sas_release_transport(pm8001_stt);
+}
+
+module_init(pm8001_init);
+module_exit(pm8001_exit);
+
+MODULE_AUTHOR("Jack Wang <jack_wang@usish.com>");
+MODULE_DESCRIPTION("PMC-Sierra PM8001 SAS/SATA controller driver");
+MODULE_VERSION(DRV_VERSION);
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, pm8001_pci_table);
+
diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c
new file mode 100644
index 0000000..1f767a0
--- /dev/null
+++ b/drivers/scsi/pm8001/pm8001_sas.c
@@ -0,0 +1,1103 @@
+/*
+ * PMC-Sierra SPC 8001 SAS/SATA based host adapters driver
+ *
+ * Copyright (c) 2008-2009 USI Co., Ltd.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * substantially similar to the "NO WARRANTY" disclaimer below
+ * ("Disclaimer") and any redistribution must be conditioned upon
+ * including a substantially similar Disclaimer requirement for further
+ * binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ *
+ */
+
+#include "pm8001_sas.h"
+
+/**
+ * pm8001_find_tag - from sas task to find out tag that belongs to this task
+ * @task: the task sent to the LLDD
+ * @tag: the found tag associated with the task
+ */
+static int pm8001_find_tag(struct sas_task *task, u32 *tag)
+{
+ if (task->lldd_task) {
+ struct pm8001_ccb_info *ccb;
+ ccb = task->lldd_task;
+ *tag = ccb->ccb_tag;
+ return 1;
+ }
+ return 0;
+}
+
+/**
+ * pm8001_tag_clear - clear the tags bitmap
+ * @pm8001_ha: our hba struct
+ * @tag: the found tag associated with the task
+ */
+static void pm8001_tag_clear(struct pm8001_hba_info *pm8001_ha, u32 tag)
+{
+ void *bitmap = pm8001_ha->tags;
+ clear_bit(tag, bitmap);
+}
+
+static void pm8001_tag_free(struct pm8001_hba_info *pm8001_ha, u32 tag)
+{
+ pm8001_tag_clear(pm8001_ha, tag);
+}
+
+static void pm8001_tag_set(struct pm8001_hba_info *pm8001_ha, u32 tag)
+{
+ void *bitmap = pm8001_ha->tags;
+ set_bit(tag, bitmap);
+}
+
+/**
+ * pm8001_tag_alloc - allocate a empty tag for task used.
+ * @pm8001_ha: our hba struct
+ * @tag_out: the found empty tag .
+ */
+inline int pm8001_tag_alloc(struct pm8001_hba_info *pm8001_ha, u32 *tag_out)
+{
+ unsigned int index, tag;
+ void *bitmap = pm8001_ha->tags;
+
+ index = find_first_zero_bit(bitmap, pm8001_ha->tags_num);
+ tag = index;
+ if (tag >= pm8001_ha->tags_num)
+ return -SAS_QUEUE_FULL;
+ pm8001_tag_set(pm8001_ha, tag);
+ *tag_out = tag;
+ return 0;
+}
+
+void pm8001_tag_init(struct pm8001_hba_info *pm8001_ha)
+{
+ int i;
+ for (i = 0; i < pm8001_ha->tags_num; ++i)
+ pm8001_tag_clear(pm8001_ha, i);
+}
+
+ /**
+ * pm8001_mem_alloc - allocate memory for pm8001.
+ * @pdev: pci device.
+ * @virt_addr: the allocated virtual address
+ * @pphys_addr_hi: the physical address high byte address.
+ * @pphys_addr_lo: the physical address low byte address.
+ * @mem_size: memory size.
+ */
+int pm8001_mem_alloc(struct pci_dev *pdev, void **virt_addr,
+ dma_addr_t *pphys_addr, u32 *pphys_addr_hi,
+ u32 *pphys_addr_lo, u32 mem_size, u32 align)
+{
+ caddr_t mem_virt_alloc;
+ dma_addr_t mem_dma_handle;
+ u64 phys_align;
+ u64 align_offset = 0;
+ if (align)
+ align_offset = (dma_addr_t)align - 1;
+ mem_virt_alloc =
+ pci_alloc_consistent(pdev, mem_size + align, &mem_dma_handle);
+ if (!mem_virt_alloc) {
+ pm8001_printk("memory allocation error\n");
+ return -1;
+ }
+ memset((void *)mem_virt_alloc, 0, mem_size+align);
+ *pphys_addr = mem_dma_handle;
+ phys_align = (*pphys_addr + align_offset) & ~align_offset;
+ *virt_addr = (void *)mem_virt_alloc + phys_align - *pphys_addr;
+ *pphys_addr_hi = upper_32_bits(phys_align);
+ *pphys_addr_lo = lower_32_bits(phys_align);
+ return 0;
+}
+/**
+ * pm8001_find_ha_by_dev - from domain device which come from sas layer to
+ * find out our hba struct.
+ * @dev: the domain device which from sas layer.
+ */
+static
+struct pm8001_hba_info *pm8001_find_ha_by_dev(struct domain_device *dev)
+{
+ struct sas_ha_struct *sha = dev->port->ha;
+ struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
+ return pm8001_ha;
+}
+
+/**
+ * pm8001_phy_control - this function should be registered to
+ * sas_domain_function_template to provide libsas used, note: this is just
+ * control the HBA phy rather than other expander phy if you want control
+ * other phy, you should use SMP command.
+ * @sas_phy: which phy in HBA phys.
+ * @func: the operation.
+ * @funcdata: always NULL.
+ */
+int pm8001_phy_control(struct asd_sas_phy *sas_phy, enum phy_func func,
+ void *funcdata)
+{
+ int rc = 0, phy_id = sas_phy->id;
+ struct pm8001_hba_info *pm8001_ha = NULL;
+ struct sas_phy_linkrates *rates;
+ DECLARE_COMPLETION_ONSTACK(completion);
+ pm8001_ha = sas_phy->ha->lldd_ha;
+ pm8001_ha->phy[phy_id].enable_completion = &completion;
+ switch (func) {
+ case PHY_FUNC_SET_LINK_RATE:
+ rates = funcdata;
+ if (rates->minimum_linkrate) {
+ pm8001_ha->phy[phy_id].minimum_linkrate =
+ rates->minimum_linkrate;
+ }
+ if (rates->maximum_linkrate) {
+ pm8001_ha->phy[phy_id].maximum_linkrate =
+ rates->maximum_linkrate;
+ }
+ if (pm8001_ha->phy[phy_id].phy_state == 0) {
+ PM8001_CHIP_DISP->phy_start_req(pm8001_ha, phy_id);
+ wait_for_completion(&completion);
+ }
+ PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id,
+ PHY_LINK_RESET);
+ break;
+ case PHY_FUNC_HARD_RESET:
+ if (pm8001_ha->phy[phy_id].phy_state == 0) {
+ PM8001_CHIP_DISP->phy_start_req(pm8001_ha, phy_id);
+ wait_for_completion(&completion);
+ }
+ PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id,
+ PHY_HARD_RESET);
+ break;
+ case PHY_FUNC_LINK_RESET:
+ if (pm8001_ha->phy[phy_id].phy_state == 0) {
+ PM8001_CHIP_DISP->phy_start_req(pm8001_ha, phy_id);
+ wait_for_completion(&completion);
+ }
+ PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id,
+ PHY_LINK_RESET);
+ break;
+ case PHY_FUNC_RELEASE_SPINUP_HOLD:
+ PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id,
+ PHY_LINK_RESET);
+ break;
+ case PHY_FUNC_DISABLE:
+ PM8001_CHIP_DISP->phy_stop_req(pm8001_ha, phy_id);
+ break;
+ default:
+ rc = -EOPNOTSUPP;
+ }
+ msleep(300);
+ return rc;
+}
+
+int pm8001_slave_alloc(struct scsi_device *scsi_dev)
+{
+ struct domain_device *dev = sdev_to_domain_dev(scsi_dev);
+ if (dev_is_sata(dev)) {
+ /* We don't need to rescan targets
+ * if REPORT_LUNS request is failed
+ */
+ if (scsi_dev->lun > 0)
+ return -ENXIO;
+ scsi_dev->tagged_supported = 1;
+ }
+ return sas_slave_alloc(scsi_dev);
+}
+
+/**
+ * pm8001_scan_start - we should enable all HBA phys by sending the phy_start
+ * command to HBA.
+ * @shost: the scsi host data.
+ */
+void pm8001_scan_start(struct Scsi_Host *shost)
+{
+ int i;
+ struct pm8001_hba_info *pm8001_ha;
+ struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+ pm8001_ha = sha->lldd_ha;
+ PM8001_CHIP_DISP->sas_re_init_req(pm8001_ha);
+ for (i = 0; i < pm8001_ha->chip->n_phy; ++i)
+ PM8001_CHIP_DISP->phy_start_req(pm8001_ha, i);
+}
+
+int pm8001_scan_finished(struct Scsi_Host *shost, unsigned long time)
+{
+ /* give the phy enabling interrupt event time to come in (1s
+ * is empirically about all it takes) */
+ if (time < HZ)
+ return 0;
+ /* Wait for discovery to finish */
+ scsi_flush_work(shost);
+ return 1;
+}
+
+/**
+ * pm8001_task_prep_smp - the dispatcher function, prepare data for smp task
+ * @pm8001_ha: our hba card information
+ * @ccb: the ccb which attached to smp task
+ */
+static int pm8001_task_prep_smp(struct pm8001_hba_info *pm8001_ha,
+ struct pm8001_ccb_info *ccb)
+{
+ return PM8001_CHIP_DISP->smp_req(pm8001_ha, ccb);
+}
+
+u32 pm8001_get_ncq_tag(struct sas_task *task, u32 *tag)
+{
+ struct ata_queued_cmd *qc = task->uldd_task;
+ if (qc) {
+ if (qc->tf.command == ATA_CMD_FPDMA_WRITE ||
+ qc->tf.command == ATA_CMD_FPDMA_READ) {
+ *tag = qc->tag;
+ return 1;
+ }
+ }
+ return 0;
+}
+
+/**
+ * pm8001_task_prep_ata - the dispatcher function, prepare data for sata task
+ * @pm8001_ha: our hba card information
+ * @ccb: the ccb which attached to sata task
+ */
+static int pm8001_task_prep_ata(struct pm8001_hba_info *pm8001_ha,
+ struct pm8001_ccb_info *ccb)
+{
+ return PM8001_CHIP_DISP->sata_req(pm8001_ha, ccb);
+}
+
+/**
+ * pm8001_task_prep_ssp_tm - the dispatcher function, prepare task management data
+ * @pm8001_ha: our hba card information
+ * @ccb: the ccb which attached to TM
+ * @tmf: the task management IU
+ */
+static int pm8001_task_prep_ssp_tm(struct pm8001_hba_info *pm8001_ha,
+ struct pm8001_ccb_info *ccb, struct pm8001_tmf_task *tmf)
+{
+ return PM8001_CHIP_DISP->ssp_tm_req(pm8001_ha, ccb, tmf);
+}
+
+/**
+ * pm8001_task_prep_ssp - the dispatcher function,prepare ssp data for ssp task
+ * @pm8001_ha: our hba card information
+ * @ccb: the ccb which attached to ssp task
+ */
+static int pm8001_task_prep_ssp(struct pm8001_hba_info *pm8001_ha,
+ struct pm8001_ccb_info *ccb)
+{
+ return PM8001_CHIP_DISP->ssp_io_req(pm8001_ha, ccb);
+}
+int pm8001_slave_configure(struct scsi_device *sdev)
+{
+ struct domain_device *dev = sdev_to_domain_dev(sdev);
+ int ret = sas_slave_configure(sdev);
+ if (ret)
+ return ret;
+ if (dev_is_sata(dev)) {
+ #ifdef PM8001_DISABLE_NCQ
+ struct ata_port *ap = dev->sata_dev.ap;
+ struct ata_device *adev = ap->link.device;
+ adev->flags |= ATA_DFLAG_NCQ_OFF;
+ scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG, 1);
+ #endif
+ }
+ return 0;
+}
+/**
+ * pm8001_task_exec - queue the task(ssp, smp && ata) to the hardware.
+ * @task: the task to be execute.
+ * @num: if can_queue great than 1, the task can be queued up. for SMP task,
+ * we always execute one one time.
+ * @gfp_flags: gfp_flags.
+ * @is_tmf: if it is task management task.
+ * @tmf: the task management IU
+ */
+#define DEV_IS_GONE(pm8001_dev) \
+ ((!pm8001_dev || (pm8001_dev->dev_type == NO_DEVICE)))
+static int pm8001_task_exec(struct sas_task *task, const int num,
+ gfp_t gfp_flags, int is_tmf, struct pm8001_tmf_task *tmf)
+{
+ struct domain_device *dev = task->dev;
+ struct pm8001_hba_info *pm8001_ha;
+ struct pm8001_device *pm8001_dev;
+ struct sas_task *t = task;
+ struct pm8001_ccb_info *ccb;
+ u32 tag = 0xdeadbeef, rc, n_elem = 0;
+ u32 n = num;
+ unsigned long flags = 0;
+
+ if (!dev->port) {
+ struct task_status_struct *tsm = &t->task_status;
+ tsm->resp = SAS_TASK_UNDELIVERED;
+ tsm->stat = SAS_PHY_DOWN;
+ if (dev->dev_type != SATA_DEV)
+ t->task_done(t);
+ return 0;
+ }
+ pm8001_ha = pm8001_find_ha_by_dev(task->dev);
+ PM8001_IO_DBG(pm8001_ha, pm8001_printk("pm8001_task_exec device \n "));
+ spin_lock_irqsave(&pm8001_ha->lock, flags);
+ do {
+ dev = t->dev;
+ pm8001_dev = dev->lldd_dev;
+ if (DEV_IS_GONE(pm8001_dev)) {
+ if (pm8001_dev) {
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("device %d not ready.\n",
+ pm8001_dev->device_id));
+ } else {
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("device %016llx not "
+ "ready.\n", SAS_ADDR(dev->sas_addr)));
+ }
+ rc = SAS_PHY_DOWN;
+ goto out_done;
+ }
+ rc = pm8001_tag_alloc(pm8001_ha, &tag);
+ if (rc)
+ goto err_out;
+ ccb = &pm8001_ha->ccb_info[tag];
+
+ if (!sas_protocol_ata(t->task_proto)) {
+ if (t->num_scatter) {
+ n_elem = dma_map_sg(pm8001_ha->dev,
+ t->scatter,
+ t->num_scatter,
+ t->data_dir);
+ if (!n_elem) {
+ rc = -ENOMEM;
+ goto err_out_tag;
+ }
+ }
+ } else {
+ n_elem = t->num_scatter;
+ }
+
+ t->lldd_task = ccb;
+ ccb->n_elem = n_elem;
+ ccb->ccb_tag = tag;
+ ccb->task = t;
+ switch (t->task_proto) {
+ case SAS_PROTOCOL_SMP:
+ rc = pm8001_task_prep_smp(pm8001_ha, ccb);
+ break;
+ case SAS_PROTOCOL_SSP:
+ if (is_tmf)
+ rc = pm8001_task_prep_ssp_tm(pm8001_ha,
+ ccb, tmf);
+ else
+ rc = pm8001_task_prep_ssp(pm8001_ha, ccb);
+ break;
+ case SAS_PROTOCOL_SATA:
+ case SAS_PROTOCOL_STP:
+ case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP:
+ rc = pm8001_task_prep_ata(pm8001_ha, ccb);
+ break;
+ default:
+ dev_printk(KERN_ERR, pm8001_ha->dev,
+ "unknown sas_task proto: 0x%x\n",
+ t->task_proto);
+ rc = -EINVAL;
+ break;
+ }
+
+ if (rc) {
+ PM8001_IO_DBG(pm8001_ha,
+ pm8001_printk("rc is %x\n", rc));
+ goto err_out_tag;
+ }
+ /* TODO: select normal or high priority */
+ spin_lock(&t->task_state_lock);
+ t->task_state_flags |= SAS_TASK_AT_INITIATOR;
+ spin_unlock(&t->task_state_lock);
+ pm8001_dev->running_req++;
+ if (n > 1)
+ t = list_entry(t->list.next, struct sas_task, list);
+ } while (--n);
+ rc = 0;
+ goto out_done;
+
+err_out_tag:
+ pm8001_tag_free(pm8001_ha, tag);
+err_out:
+ dev_printk(KERN_ERR, pm8001_ha->dev, "pm8001 exec failed[%d]!\n", rc);
+ if (!sas_protocol_ata(t->task_proto))
+ if (n_elem)
+ dma_unmap_sg(pm8001_ha->dev, t->scatter, n_elem,
+ t->data_dir);
+out_done:
+ spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+ return rc;
+}
+
+/**
+ * pm8001_queue_command - register for upper layer used, all IO commands sent
+ * to HBA are from this interface.
+ * @task: the task to be execute.
+ * @num: if can_queue great than 1, the task can be queued up. for SMP task,
+ * we always execute one one time
+ * @gfp_flags: gfp_flags
+ */
+int pm8001_queue_command(struct sas_task *task, const int num,
+ gfp_t gfp_flags)
+{
+ return pm8001_task_exec(task, num, gfp_flags, 0, NULL);
+}
+
+void pm8001_ccb_free(struct pm8001_hba_info *pm8001_ha, u32 ccb_idx)
+{
+ pm8001_tag_clear(pm8001_ha, ccb_idx);
+}
+
+/**
+ * pm8001_ccb_task_free - free the sg for ssp and smp command, free the ccb.
+ * @pm8001_ha: our hba card information
+ * @ccb: the ccb which attached to ssp task
+ * @task: the task to be free.
+ * @ccb_idx: ccb index.
+ */
+void pm8001_ccb_task_free(struct pm8001_hba_info *pm8001_ha,
+ struct sas_task *task, struct pm8001_ccb_info *ccb, u32 ccb_idx)
+{
+ if (!ccb->task)
+ return;
+ if (!sas_protocol_ata(task->task_proto))
+ if (ccb->n_elem)
+ dma_unmap_sg(pm8001_ha->dev, task->scatter,
+ task->num_scatter, task->data_dir);
+
+ switch (task->task_proto) {
+ case SAS_PROTOCOL_SMP:
+ dma_unmap_sg(pm8001_ha->dev, &task->smp_task.smp_resp, 1,
+ PCI_DMA_FROMDEVICE);
+ dma_unmap_sg(pm8001_ha->dev, &task->smp_task.smp_req, 1,
+ PCI_DMA_TODEVICE);
+ break;
+
+ case SAS_PROTOCOL_SATA:
+ case SAS_PROTOCOL_STP:
+ case SAS_PROTOCOL_SSP:
+ default:
+ /* do nothing */
+ break;
+ }
+ task->lldd_task = NULL;
+ ccb->task = NULL;
+ ccb->ccb_tag = 0xFFFFFFFF;
+ pm8001_ccb_free(pm8001_ha, ccb_idx);
+}
+
+ /**
+ * pm8001_alloc_dev - find a empty pm8001_device
+ * @pm8001_ha: our hba card information
+ */
+struct pm8001_device *pm8001_alloc_dev(struct pm8001_hba_info *pm8001_ha)
+{
+ u32 dev;
+ for (dev = 0; dev < PM8001_MAX_DEVICES; dev++) {
+ if (pm8001_ha->devices[dev].dev_type == NO_DEVICE) {
+ pm8001_ha->devices[dev].id = dev;
+ return &pm8001_ha->devices[dev];
+ }
+ }
+ if (dev == PM8001_MAX_DEVICES) {
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("max support %d devices, ignore ..\n",
+ PM8001_MAX_DEVICES));
+ }
+ return NULL;
+}
+
+static void pm8001_free_dev(struct pm8001_device *pm8001_dev)
+{
+ u32 id = pm8001_dev->id;
+ memset(pm8001_dev, 0, sizeof(*pm8001_dev));
+ pm8001_dev->id = id;
+ pm8001_dev->dev_type = NO_DEVICE;
+ pm8001_dev->device_id = PM8001_MAX_DEVICES;
+ pm8001_dev->sas_device = NULL;
+}
+
+/**
+ * pm8001_dev_found_notify - libsas notify a device is found.
+ * @dev: the device structure which sas layer used.
+ *
+ * when libsas find a sas domain device, it should tell the LLDD that
+ * device is found, and then LLDD register this device to HBA firmware
+ * by the command "OPC_INB_REG_DEV", after that the HBA will assign a
+ * device ID(according to device's sas address) and returned it to LLDD. From
+ * now on, we communicate with HBA FW with the device ID which HBA assigned
+ * rather than sas address. it is the neccessary step for our HBA but it is
+ * the optional for other HBA driver.
+ */
+static int pm8001_dev_found_notify(struct domain_device *dev)
+{
+ unsigned long flags = 0;
+ int res = 0;
+ struct pm8001_hba_info *pm8001_ha = NULL;
+ struct domain_device *parent_dev = dev->parent;
+ struct pm8001_device *pm8001_device;
+ DECLARE_COMPLETION_ONSTACK(completion);
+ u32 flag = 0;
+ pm8001_ha = pm8001_find_ha_by_dev(dev);
+ spin_lock_irqsave(&pm8001_ha->lock, flags);
+
+ pm8001_device = pm8001_alloc_dev(pm8001_ha);
+ pm8001_device->sas_device = dev;
+ if (!pm8001_device) {
+ res = -1;
+ goto found_out;
+ }
+ dev->lldd_dev = pm8001_device;
+ pm8001_device->dev_type = dev->dev_type;
+ pm8001_device->dcompletion = &completion;
+ if (parent_dev && DEV_IS_EXPANDER(parent_dev->dev_type)) {
+ int phy_id;
+ struct ex_phy *phy;
+ for (phy_id = 0; phy_id < parent_dev->ex_dev.num_phys;
+ phy_id++) {
+ phy = &parent_dev->ex_dev.ex_phy[phy_id];
+ if (SAS_ADDR(phy->attached_sas_addr)
+ == SAS_ADDR(dev->sas_addr)) {
+ pm8001_device->attached_phy = phy_id;
+ break;
+ }
+ }
+ if (phy_id == parent_dev->ex_dev.num_phys) {
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("Error: no attached dev:%016llx"
+ " at ex:%016llx.\n", SAS_ADDR(dev->sas_addr),
+ SAS_ADDR(parent_dev->sas_addr)));
+ res = -1;
+ }
+ } else {
+ if (dev->dev_type == SATA_DEV) {
+ pm8001_device->attached_phy =
+ dev->rphy->identify.phy_identifier;
+ flag = 1; /* directly sata*/
+ }
+ } /*register this device to HBA*/
+ PM8001_DISC_DBG(pm8001_ha, pm8001_printk("Found device \n"));
+ PM8001_CHIP_DISP->reg_dev_req(pm8001_ha, pm8001_device, flag);
+ spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+ wait_for_completion(&completion);
+ if (dev->dev_type == SAS_END_DEV)
+ msleep(50);
+ pm8001_ha->flags = PM8001F_RUN_TIME ;
+ return 0;
+found_out:
+ spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+ return res;
+}
+
+int pm8001_dev_found(struct domain_device *dev)
+{
+ return pm8001_dev_found_notify(dev);
+}
+
+/**
+ * pm8001_alloc_task - allocate a task structure for TMF
+ */
+static struct sas_task *pm8001_alloc_task(void)
+{
+ struct sas_task *task = kzalloc(sizeof(*task), GFP_KERNEL);
+ if (task) {
+ INIT_LIST_HEAD(&task->list);
+ spin_lock_init(&task->task_state_lock);
+ task->task_state_flags = SAS_TASK_STATE_PENDING;
+ init_timer(&task->timer);
+ init_completion(&task->completion);
+ }
+ return task;
+}
+
+static void pm8001_free_task(struct sas_task *task)
+{
+ if (task) {
+ BUG_ON(!list_empty(&task->list));
+ kfree(task);
+ }
+}
+
+static void pm8001_task_done(struct sas_task *task)
+{
+ if (!del_timer(&task->timer))
+ return;
+ complete(&task->completion);
+}
+
+static void pm8001_tmf_timedout(unsigned long data)
+{
+ struct sas_task *task = (struct sas_task *)data;
+
+ task->task_state_flags |= SAS_TASK_STATE_ABORTED;
+ complete(&task->completion);
+}
+
+#define PM8001_TASK_TIMEOUT 20
+/**
+ * pm8001_exec_internal_tmf_task - execute some task management commands.
+ * @dev: the wanted device.
+ * @tmf: which task management wanted to be take.
+ * @para_len: para_len.
+ * @parameter: ssp task parameter.
+ *
+ * when errors or exception happened, we may want to do something, for example
+ * abort the issued task which result in this execption, it is done by calling
+ * this function, note it is also with the task execute interface.
+ */
+static int pm8001_exec_internal_tmf_task(struct domain_device *dev,
+ void *parameter, u32 para_len, struct pm8001_tmf_task *tmf)
+{
+ int res, retry;
+ struct sas_task *task = NULL;
+ struct pm8001_hba_info *pm8001_ha = pm8001_find_ha_by_dev(dev);
+
+ for (retry = 0; retry < 3; retry++) {
+ task = pm8001_alloc_task();
+ if (!task)
+ return -ENOMEM;
+
+ task->dev = dev;
+ task->task_proto = dev->tproto;
+ memcpy(&task->ssp_task, parameter, para_len);
+ task->task_done = pm8001_task_done;
+ task->timer.data = (unsigned long)task;
+ task->timer.function = pm8001_tmf_timedout;
+ task->timer.expires = jiffies + PM8001_TASK_TIMEOUT*HZ;
+ add_timer(&task->timer);
+
+ res = pm8001_task_exec(task, 1, GFP_KERNEL, 1, tmf);
+
+ if (res) {
+ del_timer(&task->timer);
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("Executing internal task "
+ "failed\n"));
+ goto ex_err;
+ }
+ wait_for_completion(&task->completion);
+ res = -TMF_RESP_FUNC_FAILED;
+ /* Even TMF timed out, return direct. */
+ if ((task->task_state_flags & SAS_TASK_STATE_ABORTED)) {
+ if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) {
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("TMF task[%x]timeout.\n",
+ tmf->tmf));
+ goto ex_err;
+ }
+ }
+
+ if (task->task_status.resp == SAS_TASK_COMPLETE &&
+ task->task_status.stat == SAM_GOOD) {
+ res = TMF_RESP_FUNC_COMPLETE;
+ break;
+ }
+
+ if (task->task_status.resp == SAS_TASK_COMPLETE &&
+ task->task_status.stat == SAS_DATA_UNDERRUN) {
+ /* no error, but return the number of bytes of
+ * underrun */
+ res = task->task_status.residual;
+ break;
+ }
+
+ if (task->task_status.resp == SAS_TASK_COMPLETE &&
+ task->task_status.stat == SAS_DATA_OVERRUN) {
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("Blocked task error.\n"));
+ res = -EMSGSIZE;
+ break;
+ } else {
+ PM8001_EH_DBG(pm8001_ha,
+ pm8001_printk(" Task to dev %016llx response:"
+ "0x%x status 0x%x\n",
+ SAS_ADDR(dev->sas_addr),
+ task->task_status.resp,
+ task->task_status.stat));
+ pm8001_free_task(task);
+ task = NULL;
+ }
+ }
+ex_err:
+ BUG_ON(retry == 3 && task != NULL);
+ if (task != NULL)
+ pm8001_free_task(task);
+ return res;
+}
+
+static int
+pm8001_exec_internal_task_abort(struct pm8001_hba_info *pm8001_ha,
+ struct pm8001_device *pm8001_dev, struct domain_device *dev, u32 flag,
+ u32 task_tag)
+{
+ int res, retry;
+ u32 ccb_tag;
+ struct pm8001_ccb_info *ccb;
+ struct sas_task *task = NULL;
+
+ for (retry = 0; retry < 3; retry++) {
+ task = pm8001_alloc_task();
+ if (!task)
+ return -ENOMEM;
+
+ task->dev = dev;
+ task->task_proto = dev->tproto;
+ task->task_done = pm8001_task_done;
+ task->timer.data = (unsigned long)task;
+ task->timer.function = pm8001_tmf_timedout;
+ task->timer.expires = jiffies + PM8001_TASK_TIMEOUT*HZ;
+ add_timer(&task->timer);
+
+ res = pm8001_tag_alloc(pm8001_ha, &ccb_tag);
+ if (res)
+ return res;
+ ccb = &pm8001_ha->ccb_info[ccb_tag];
+ ccb->device = pm8001_dev;
+ ccb->ccb_tag = ccb_tag;
+ ccb->task = task;
+
+ res = PM8001_CHIP_DISP->task_abort(pm8001_ha,
+ pm8001_dev, flag, task_tag, ccb_tag);
+
+ if (res) {
+ del_timer(&task->timer);
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("Executing internal task "
+ "failed\n"));
+ goto ex_err;
+ }
+ wait_for_completion(&task->completion);
+ res = TMF_RESP_FUNC_FAILED;
+ /* Even TMF timed out, return direct. */
+ if ((task->task_state_flags & SAS_TASK_STATE_ABORTED)) {
+ if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) {
+ PM8001_FAIL_DBG(pm8001_ha,
+ pm8001_printk("TMF task timeout.\n"));
+ goto ex_err;
+ }
+ }
+
+ if (task->task_status.resp == SAS_TASK_COMPLETE &&
+ task->task_status.stat == SAM_GOOD) {
+ res = TMF_RESP_FUNC_COMPLETE;
+ break;
+
+ } else {
+ PM8001_EH_DBG(pm8001_ha,
+ pm8001_printk(" Task to dev %016llx response: "
+ "0x%x status 0x%x\n",
+ SAS_ADDR(dev->sas_addr),
+ task->task_status.resp,
+ task->task_status.stat));
+ pm8001_free_task(task);
+ task = NULL;
+ }
+ }
+ex_err:
+ BUG_ON(retry == 3 && task != NULL);
+ if (task != NULL)
+ pm8001_free_task(task);
+ return res;
+}
+
+/**
+ * pm8001_dev_gone_notify - see the comments for "pm8001_dev_found_notify"
+ * @dev: the device structure which sas layer used.
+ */
+static void pm8001_dev_gone_notify(struct domain_device *dev)
+{
+ unsigned long flags = 0;
+ u32 tag;
+ struct pm8001_hba_info *pm8001_ha;
+ struct pm8001_device *pm8001_dev = dev->lldd_dev;
+ u32 device_id = pm8001_dev->device_id;
+ pm8001_ha = pm8001_find_ha_by_dev(dev);
+ spin_lock_irqsave(&pm8001_ha->lock, flags);
+ pm8001_tag_alloc(pm8001_ha, &tag);
+ if (pm8001_dev) {
+ PM8001_DISC_DBG(pm8001_ha,
+ pm8001_printk("found dev[%d:%x] is gone.\n",
+ pm8001_dev->device_id, pm8001_dev->dev_type));
+ if (pm8001_dev->running_req) {
+ spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+ pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev ,
+ dev, 1, 0);
+ spin_lock_irqsave(&pm8001_ha->lock, flags);
+ }
+ PM8001_CHIP_DISP->dereg_dev_req(pm8001_ha, device_id);
+ pm8001_free_dev(pm8001_dev);
+ } else {
+ PM8001_DISC_DBG(pm8001_ha,
+ pm8001_printk("Found dev has gone.\n"));
+ }
+ dev->lldd_dev = NULL;
+ spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+}
+
+void pm8001_dev_gone(struct domain_device *dev)
+{
+ pm8001_dev_gone_notify(dev);
+}
+
+static int pm8001_issue_ssp_tmf(struct domain_device *dev,
+ u8 *lun, struct pm8001_tmf_task *tmf)
+{
+ struct sas_ssp_task ssp_task;
+ if (!(dev->tproto & SAS_PROTOCOL_SSP))
+ return TMF_RESP_FUNC_ESUPP;
+
+ strncpy((u8 *)&ssp_task.LUN, lun, 8);
+ return pm8001_exec_internal_tmf_task(dev, &ssp_task, sizeof(ssp_task),
+ tmf);
+}
+
+/**
+ * Standard mandates link reset for ATA (type 0) and hard reset for
+ * SSP (type 1) , only for RECOVERY
+ */
+int pm8001_I_T_nexus_reset(struct domain_device *dev)
+{
+ int rc = TMF_RESP_FUNC_FAILED;
+ struct pm8001_device *pm8001_dev;
+ struct pm8001_hba_info *pm8001_ha;
+ struct sas_phy *phy;
+ if (!dev || !dev->lldd_dev)
+ return -1;
+
+ pm8001_dev = dev->lldd_dev;
+ pm8001_ha = pm8001_find_ha_by_dev(dev);
+ phy = sas_find_local_phy(dev);
+
+ if (dev_is_sata(dev)) {
+ DECLARE_COMPLETION_ONSTACK(completion_setstate);
+ rc = sas_phy_reset(phy, 1);
+ msleep(2000);
+ rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev ,
+ dev, 1, 0);
+ pm8001_dev->setds_completion = &completion_setstate;
+ rc = PM8001_CHIP_DISP->set_dev_state_req(pm8001_ha,
+ pm8001_dev, 0x01);
+ wait_for_completion(&completion_setstate);
+ } else{
+ rc = sas_phy_reset(phy, 1);
+ msleep(2000);
+ }
+ PM8001_EH_DBG(pm8001_ha, pm8001_printk(" for device[%x]:rc=%d\n",
+ pm8001_dev->device_id, rc));
+ return rc;
+}
+
+/* mandatory SAM-3, the task reset the specified LUN*/
+int pm8001_lu_reset(struct domain_device *dev, u8 *lun)
+{
+ int rc = TMF_RESP_FUNC_FAILED;
+ struct pm8001_tmf_task tmf_task;
+ struct pm8001_device *pm8001_dev = dev->lldd_dev;
+ struct pm8001_hba_info *pm8001_ha = pm8001_find_ha_by_dev(dev);
+ if (dev_is_sata(dev)) {
+ struct sas_phy *phy = sas_find_local_phy(dev);
+ rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev ,
+ dev, 1, 0);
+ rc = sas_phy_reset(phy, 1);
+ rc = PM8001_CHIP_DISP->set_dev_state_req(pm8001_ha,
+ pm8001_dev, 0x01);
+ msleep(2000);
+ } else {
+ tmf_task.tmf = TMF_LU_RESET;
+ rc = pm8001_issue_ssp_tmf(dev, lun, &tmf_task);
+ }
+ /* If failed, fall-through I_T_Nexus reset */
+ PM8001_EH_DBG(pm8001_ha, pm8001_printk("for device[%x]:rc=%d\n",
+ pm8001_dev->device_id, rc));
+ return rc;
+}
+
+/* optional SAM-3 */
+int pm8001_query_task(struct sas_task *task)
+{
+ u32 tag = 0xdeadbeef;
+ int i = 0;
+ struct scsi_lun lun;
+ struct pm8001_tmf_task tmf_task;
+ int rc = TMF_RESP_FUNC_FAILED;
+ if (unlikely(!task || !task->lldd_task || !task->dev))
+ return rc;
+
+ if (task->task_proto & SAS_PROTOCOL_SSP) {
+ struct scsi_cmnd *cmnd = task->uldd_task;
+ struct domain_device *dev = task->dev;
+ struct pm8001_hba_info *pm8001_ha =
+ pm8001_find_ha_by_dev(dev);
+
+ int_to_scsilun(cmnd->device->lun, &lun);
+ rc = pm8001_find_tag(task, &tag);
+ if (rc == 0) {
+ rc = TMF_RESP_FUNC_FAILED;
+ return rc;
+ }
+ PM8001_EH_DBG(pm8001_ha, pm8001_printk("Query:["));
+ for (i = 0; i < 16; i++)
+ printk(KERN_INFO "%02x ", cmnd->cmnd[i]);
+ printk(KERN_INFO "]\n");
+ tmf_task.tmf = TMF_QUERY_TASK;
+ tmf_task.tag_of_task_to_be_managed = tag;
+
+ rc = pm8001_issue_ssp_tmf(dev, lun.scsi_lun, &tmf_task);
+ switch (rc) {
+ /* The task is still in Lun, release it then */
+ case TMF_RESP_FUNC_SUCC:
+ PM8001_EH_DBG(pm8001_ha,
+ pm8001_printk("The task is still in Lun \n"));
+ /* The task is not in Lun or failed, reset the phy */
+ case TMF_RESP_FUNC_FAILED:
+ case TMF_RESP_FUNC_COMPLETE:
+ PM8001_EH_DBG(pm8001_ha,
+ pm8001_printk("The task is not in Lun or failed,"
+ " reset the phy \n"));
+ break;
+ }
+ }
+ pm8001_printk(":rc= %d\n", rc);
+ return rc;
+}
+
+/* mandatory SAM-3, still need free task/ccb info, abord the specified task */
+int pm8001_abort_task(struct sas_task *task)
+{
+ unsigned long flags;
+ u32 tag = 0xdeadbeef;
+ u32 device_id;
+ struct domain_device *dev ;
+ struct pm8001_hba_info *pm8001_ha = NULL;
+ struct pm8001_ccb_info *ccb;
+ struct scsi_lun lun;
+ struct pm8001_device *pm8001_dev;
+ struct pm8001_tmf_task tmf_task;
+ int rc = TMF_RESP_FUNC_FAILED;
+ if (unlikely(!task || !task->lldd_task || !task->dev))
+ return rc;
+ spin_lock_irqsave(&task->task_state_lock, flags);
+ if (task->task_state_flags & SAS_TASK_STATE_DONE) {
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
+ rc = TMF_RESP_FUNC_COMPLETE;
+ goto out;
+ }
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
+ if (task->task_proto & SAS_PROTOCOL_SSP) {
+ struct scsi_cmnd *cmnd = task->uldd_task;
+ dev = task->dev;
+ ccb = task->lldd_task;
+ pm8001_dev = dev->lldd_dev;
+ pm8001_ha = pm8001_find_ha_by_dev(dev);
+ int_to_scsilun(cmnd->device->lun, &lun);
+ rc = pm8001_find_tag(task, &tag);
+ if (rc == 0) {
+ printk(KERN_INFO "No such tag in %s\n", __func__);
+ rc = TMF_RESP_FUNC_FAILED;
+ return rc;
+ }
+ device_id = pm8001_dev->device_id;
+ PM8001_EH_DBG(pm8001_ha,
+ pm8001_printk("abort io to deviceid= %d\n", device_id));
+ tmf_task.tmf = TMF_ABORT_TASK;
+ tmf_task.tag_of_task_to_be_managed = tag;
+ rc = pm8001_issue_ssp_tmf(dev, lun.scsi_lun, &tmf_task);
+ pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev,
+ pm8001_dev->sas_device, 0, tag);
+ } else if (task->task_proto & SAS_PROTOCOL_SATA ||
+ task->task_proto & SAS_PROTOCOL_STP) {
+ dev = task->dev;
+ pm8001_dev = dev->lldd_dev;
+ pm8001_ha = pm8001_find_ha_by_dev(dev);
+ rc = pm8001_find_tag(task, &tag);
+ if (rc == 0) {
+ printk(KERN_INFO "No such tag in %s\n", __func__);
+ rc = TMF_RESP_FUNC_FAILED;
+ return rc;
+ }
+ rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev,
+ pm8001_dev->sas_device, 0, tag);
+ } else if (task->task_proto & SAS_PROTOCOL_SMP) {
+ /* SMP */
+ dev = task->dev;
+ pm8001_dev = dev->lldd_dev;
+ pm8001_ha = pm8001_find_ha_by_dev(dev);
+ rc = pm8001_find_tag(task, &tag);
+ if (rc == 0) {
+ printk(KERN_INFO "No such tag in %s\n", __func__);
+ rc = TMF_RESP_FUNC_FAILED;
+ return rc;
+ }
+ rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev,
+ pm8001_dev->sas_device, 0, tag);
+
+ }
+out:
+ if (rc != TMF_RESP_FUNC_COMPLETE)
+ pm8001_printk("rc= %d\n", rc);
+ return rc;
+}
+
+int pm8001_abort_task_set(struct domain_device *dev, u8 *lun)
+{
+ int rc = TMF_RESP_FUNC_FAILED;
+ struct pm8001_tmf_task tmf_task;
+
+ tmf_task.tmf = TMF_ABORT_TASK_SET;
+ rc = pm8001_issue_ssp_tmf(dev, lun, &tmf_task);
+ return rc;
+}
+
+int pm8001_clear_aca(struct domain_device *dev, u8 *lun)
+{
+ int rc = TMF_RESP_FUNC_FAILED;
+ struct pm8001_tmf_task tmf_task;
+
+ tmf_task.tmf = TMF_CLEAR_ACA;
+ rc = pm8001_issue_ssp_tmf(dev, lun, &tmf_task);
+
+ return rc;
+}
+
+int pm8001_clear_task_set(struct domain_device *dev, u8 *lun)
+{
+ int rc = TMF_RESP_FUNC_FAILED;
+ struct pm8001_tmf_task tmf_task;
+ struct pm8001_device *pm8001_dev = dev->lldd_dev;
+ struct pm8001_hba_info *pm8001_ha = pm8001_find_ha_by_dev(dev);
+
+ PM8001_EH_DBG(pm8001_ha,
+ pm8001_printk("I_T_L_Q clear task set[%x]\n",
+ pm8001_dev->device_id));
+ tmf_task.tmf = TMF_CLEAR_TASK_SET;
+ rc = pm8001_issue_ssp_tmf(dev, lun, &tmf_task);
+ return rc;
+}
+
diff --git a/drivers/scsi/pm8001/pm8001_sas.h b/drivers/scsi/pm8001/pm8001_sas.h
new file mode 100644
index 0000000..30f2ede
--- /dev/null
+++ b/drivers/scsi/pm8001/pm8001_sas.h
@@ -0,0 +1,481 @@
+/*
+ * PMC-Sierra SPC 8001 SAS/SATA based host adapters driver
+ *
+ * Copyright (c) 2008-2009 USI Co., Ltd.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * substantially similar to the "NO WARRANTY" disclaimer below
+ * ("Disclaimer") and any redistribution must be conditioned upon
+ * including a substantially similar Disclaimer requirement for further
+ * binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ *
+ */
+
+#ifndef _PM8001_SAS_H_
+#define _PM8001_SAS_H_
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <linux/types.h>
+#include <linux/ctype.h>
+#include <linux/dma-mapping.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/smp_lock.h>
+#include <scsi/libsas.h>
+#include <scsi/scsi_tcq.h>
+#include <scsi/sas_ata.h>
+#include <asm/atomic.h>
+#include "pm8001_defs.h"
+
+#define DRV_NAME "pm8001"
+#define DRV_VERSION "0.1.36"
+#define PM8001_FAIL_LOGGING 0x01 /* libsas EH function logging */
+#define PM8001_INIT_LOGGING 0x02 /* driver init logging */
+#define PM8001_DISC_LOGGING 0x04 /* discovery layer logging */
+#define PM8001_IO_LOGGING 0x08 /* I/O path logging */
+#define PM8001_EH_LOGGING 0x10 /* Error message logging */
+#define PM8001_IOCTL_LOGGING 0x20 /* IOCTL message logging */
+#define PM8001_MSG_LOGGING 0x40 /* misc message logging */
+#define pm8001_printk(format, arg...) printk(KERN_INFO "%s %d:" format,\
+ __func__, __LINE__, ## arg)
+#define PM8001_CHECK_LOGGING(HBA, LEVEL, CMD) \
+do { \
+ if (unlikely(HBA->logging_level & LEVEL)) \
+ do { \
+ CMD; \
+ } while (0); \
+} while (0);
+
+#define PM8001_EH_DBG(HBA, CMD) \
+ PM8001_CHECK_LOGGING(HBA, PM8001_EH_LOGGING, CMD)
+
+#define PM8001_INIT_DBG(HBA, CMD) \
+ PM8001_CHECK_LOGGING(HBA, PM8001_INIT_LOGGING, CMD)
+
+#define PM8001_DISC_DBG(HBA, CMD) \
+ PM8001_CHECK_LOGGING(HBA, PM8001_DISC_LOGGING, CMD)
+
+#define PM8001_IO_DBG(HBA, CMD) \
+ PM8001_CHECK_LOGGING(HBA, PM8001_IO_LOGGING, CMD)
+
+#define PM8001_FAIL_DBG(HBA, CMD) \
+ PM8001_CHECK_LOGGING(HBA, PM8001_FAIL_LOGGING, CMD)
+
+#define PM8001_IOCTL_DBG(HBA, CMD) \
+ PM8001_CHECK_LOGGING(HBA, PM8001_IOCTL_LOGGING, CMD)
+
+#define PM8001_MSG_DBG(HBA, CMD) \
+ PM8001_CHECK_LOGGING(HBA, PM8001_MSG_LOGGING, CMD)
+
+
+#define PM8001_USE_TASKLET
+#define PM8001_USE_MSIX
+
+
+#define DEV_IS_EXPANDER(type) ((type == EDGE_DEV) || (type == FANOUT_DEV))
+
+#define PM8001_NAME_LENGTH 32/* generic length of strings */
+extern struct list_head hba_list;
+extern const struct pm8001_dispatch pm8001_8001_dispatch;
+
+struct pm8001_hba_info;
+struct pm8001_ccb_info;
+struct pm8001_device;
+struct pm8001_tmf_task;
+struct pm8001_dispatch {
+ char *name;
+ int (*chip_init)(struct pm8001_hba_info *pm8001_ha);
+ int (*chip_soft_rst)(struct pm8001_hba_info *pm8001_ha, u32 signature);
+ void (*chip_rst)(struct pm8001_hba_info *pm8001_ha);
+ int (*chip_ioremap)(struct pm8001_hba_info *pm8001_ha);
+ void (*chip_iounmap)(struct pm8001_hba_info *pm8001_ha);
+ irqreturn_t (*isr)(struct pm8001_hba_info *pm8001_ha);
+ u32 (*is_our_interupt)(struct pm8001_hba_info *pm8001_ha);
+ int (*isr_process_oq)(struct pm8001_hba_info *pm8001_ha);
+ void (*interrupt_enable)(struct pm8001_hba_info *pm8001_ha);
+ void (*interrupt_disable)(struct pm8001_hba_info *pm8001_ha);
+ void (*make_prd)(struct scatterlist *scatter, int nr, void *prd);
+ int (*smp_req)(struct pm8001_hba_info *pm8001_ha,
+ struct pm8001_ccb_info *ccb);
+ int (*ssp_io_req)(struct pm8001_hba_info *pm8001_ha,
+ struct pm8001_ccb_info *ccb);
+ int (*sata_req)(struct pm8001_hba_info *pm8001_ha,
+ struct pm8001_ccb_info *ccb);
+ int (*phy_start_req)(struct pm8001_hba_info *pm8001_ha, u8 phy_id);
+ int (*phy_stop_req)(struct pm8001_hba_info *pm8001_ha, u8 phy_id);
+ int (*reg_dev_req)(struct pm8001_hba_info *pm8001_ha,
+ struct pm8001_device *pm8001_dev, u32 flag);
+ int (*dereg_dev_req)(struct pm8001_hba_info *pm8001_ha, u32 device_id);
+ int (*phy_ctl_req)(struct pm8001_hba_info *pm8001_ha,
+ u32 phy_id, u32 phy_op);
+ int (*task_abort)(struct pm8001_hba_info *pm8001_ha,
+ struct pm8001_device *pm8001_dev, u8 flag, u32 task_tag,
+ u32 cmd_tag);
+ int (*ssp_tm_req)(struct pm8001_hba_info *pm8001_ha,
+ struct pm8001_ccb_info *ccb, struct pm8001_tmf_task *tmf);
+ int (*get_nvmd_req)(struct pm8001_hba_info *pm8001_ha, void *payload);
+ int (*set_nvmd_req)(struct pm8001_hba_info *pm8001_ha, void *payload);
+ int (*fw_flash_update_req)(struct pm8001_hba_info *pm8001_ha,
+ void *payload);
+ int (*set_dev_state_req)(struct pm8001_hba_info *pm8001_ha,
+ struct pm8001_device *pm8001_dev, u32 state);
+ int (*sas_diag_start_end_req)(struct pm8001_hba_info *pm8001_ha,
+ u32 state);
+ int (*sas_diag_execute_req)(struct pm8001_hba_info *pm8001_ha,
+ u32 state);
+ int (*sas_re_init_req)(struct pm8001_hba_info *pm8001_ha);
+};
+
+struct pm8001_chip_info {
+ u32 n_phy;
+ const struct pm8001_dispatch *dispatch;
+};
+#define PM8001_CHIP_DISP (pm8001_ha->chip->dispatch)
+
+struct pm8001_port {
+ struct asd_sas_port sas_port;
+};
+
+struct pm8001_phy {
+ struct pm8001_hba_info *pm8001_ha;
+ struct pm8001_port *port;
+ struct asd_sas_phy sas_phy;
+ struct sas_identify identify;
+ struct scsi_device *sdev;
+ u64 dev_sas_addr;
+ u32 phy_type;
+ struct completion *enable_completion;
+ u32 frame_rcvd_size;
+ u8 frame_rcvd[32];
+ u8 phy_attached;
+ u8 phy_state;
+ enum sas_linkrate minimum_linkrate;
+ enum sas_linkrate maximum_linkrate;
+};
+
+struct pm8001_device {
+ enum sas_dev_type dev_type;
+ struct domain_device *sas_device;
+ u32 attached_phy;
+ u32 id;
+ struct completion *dcompletion;
+ struct completion *setds_completion;
+ u32 device_id;
+ u32 running_req;
+};
+
+struct pm8001_prd_imt {
+ __le32 len;
+ __le32 e;
+};
+
+struct pm8001_prd {
+ __le64 addr; /* 64-bit buffer address */
+ struct pm8001_prd_imt im_len; /* 64-bit length */
+} __attribute__ ((packed));
+/*
+ * CCB(Command Control Block)
+ */
+struct pm8001_ccb_info {
+ struct list_head entry;
+ struct sas_task *task;
+ u32 n_elem;
+ u32 ccb_tag;
+ dma_addr_t ccb_dma_handle;
+ struct pm8001_device *device;
+ struct pm8001_prd buf_prd[PM8001_MAX_DMA_SG];
+ struct fw_control_ex *fw_control_context;
+};
+
+struct mpi_mem {
+ void *virt_ptr;
+ dma_addr_t phys_addr;
+ u32 phys_addr_hi;
+ u32 phys_addr_lo;
+ u32 total_len;
+ u32 num_elements;
+ u32 element_size;
+ u32 alignment;
+};
+
+struct mpi_mem_req {
+ /* The number of element in the mpiMemory array */
+ u32 count;
+ /* The array of structures that define memroy regions*/
+ struct mpi_mem region[USI_MAX_MEMCNT];
+};
+
+struct main_cfg_table {
+ u32 signature;
+ u32 interface_rev;
+ u32 firmware_rev;
+ u32 max_out_io;
+ u32 max_sgl;
+ u32 ctrl_cap_flag;
+ u32 gst_offset;
+ u32 inbound_queue_offset;
+ u32 outbound_queue_offset;
+ u32 inbound_q_nppd_hppd;
+ u32 outbound_hw_event_pid0_3;
+ u32 outbound_hw_event_pid4_7;
+ u32 outbound_ncq_event_pid0_3;
+ u32 outbound_ncq_event_pid4_7;
+ u32 outbound_tgt_ITNexus_event_pid0_3;
+ u32 outbound_tgt_ITNexus_event_pid4_7;
+ u32 outbound_tgt_ssp_event_pid0_3;
+ u32 outbound_tgt_ssp_event_pid4_7;
+ u32 outbound_tgt_smp_event_pid0_3;
+ u32 outbound_tgt_smp_event_pid4_7;
+ u32 upper_event_log_addr;
+ u32 lower_event_log_addr;
+ u32 event_log_size;
+ u32 event_log_option;
+ u32 upper_iop_event_log_addr;
+ u32 lower_iop_event_log_addr;
+ u32 iop_event_log_size;
+ u32 iop_event_log_option;
+ u32 fatal_err_interrupt;
+ u32 fatal_err_dump_offset0;
+ u32 fatal_err_dump_length0;
+ u32 fatal_err_dump_offset1;
+ u32 fatal_err_dump_length1;
+ u32 hda_mode_flag;
+ u32 anolog_setup_table_offset;
+};
+struct general_status_table {
+ u32 gst_len_mpistate;
+ u32 iq_freeze_state0;
+ u32 iq_freeze_state1;
+ u32 msgu_tcnt;
+ u32 iop_tcnt;
+ u32 reserved;
+ u32 phy_state[8];
+ u32 reserved1;
+ u32 reserved2;
+ u32 reserved3;
+ u32 recover_err_info[8];
+};
+struct inbound_queue_table {
+ u32 element_pri_size_cnt;
+ u32 upper_base_addr;
+ u32 lower_base_addr;
+ u32 ci_upper_base_addr;
+ u32 ci_lower_base_addr;
+ u32 pi_pci_bar;
+ u32 pi_offset;
+ u32 total_length;
+ void *base_virt;
+ void *ci_virt;
+ u32 reserved;
+ __le32 consumer_index;
+ u32 producer_idx;
+};
+struct outbound_queue_table {
+ u32 element_size_cnt;
+ u32 upper_base_addr;
+ u32 lower_base_addr;
+ void *base_virt;
+ u32 pi_upper_base_addr;
+ u32 pi_lower_base_addr;
+ u32 ci_pci_bar;
+ u32 ci_offset;
+ u32 total_length;
+ void *pi_virt;
+ u32 interrup_vec_cnt_delay;
+ u32 dinterrup_to_pci_offset;
+ __le32 producer_index;
+ u32 consumer_idx;
+};
+struct pm8001_hba_memspace {
+ void __iomem *memvirtaddr;
+ u64 membase;
+ u32 memsize;
+};
+struct pm8001_hba_info {
+ char name[PM8001_NAME_LENGTH];
+ struct list_head list;
+ unsigned long flags;
+ spinlock_t lock;/* host-wide lock */
+ struct pci_dev *pdev;/* our device */
+ struct device *dev;
+ struct pm8001_hba_memspace io_mem[6];
+ struct mpi_mem_req memoryMap;
+ void __iomem *msg_unit_tbl_addr;/*Message Unit Table Addr*/
+ void __iomem *main_cfg_tbl_addr;/*Main Config Table Addr*/
+ void __iomem *general_stat_tbl_addr;/*General Status Table Addr*/
+ void __iomem *inbnd_q_tbl_addr;/*Inbound Queue Config Table Addr*/
+ void __iomem *outbnd_q_tbl_addr;/*Outbound Queue Config Table Addr*/
+ struct main_cfg_table main_cfg_tbl;
+ struct general_status_table gs_tbl;
+ struct inbound_queue_table inbnd_q_tbl[PM8001_MAX_INB_NUM];
+ struct outbound_queue_table outbnd_q_tbl[PM8001_MAX_OUTB_NUM];
+ u8 sas_addr[SAS_ADDR_SIZE];
+ struct sas_ha_struct *sas;/* SCSI/SAS glue */
+ struct Scsi_Host *shost;
+ u32 chip_id;
+ const struct pm8001_chip_info *chip;
+ struct completion *nvmd_completion;
+ int tags_num;
+ unsigned long *tags;
+ struct pm8001_phy phy[PM8001_MAX_PHYS];
+ struct pm8001_port port[PM8001_MAX_PHYS];
+ u32 id;
+ u32 irq;
+ struct pm8001_device *devices;
+ struct pm8001_ccb_info *ccb_info;
+#ifdef PM8001_USE_MSIX
+ struct msix_entry msix_entries[16];/*for msi-x interrupt*/
+ int number_of_intr;/*will be used in remove()*/
+#endif
+#ifdef PM8001_USE_TASKLET
+ struct tasklet_struct tasklet;
+#endif
+ struct list_head wq_list;
+ u32 logging_level;
+ u32 fw_status;
+ const struct firmware *fw_image;
+};
+
+struct pm8001_wq {
+ struct delayed_work work_q;
+ struct pm8001_hba_info *pm8001_ha;
+ void *data;
+ int handler;
+ struct list_head entry;
+};
+
+struct pm8001_fw_image_header {
+ u8 vender_id[8];
+ u8 product_id;
+ u8 hardware_rev;
+ u8 dest_partition;
+ u8 reserved;
+ u8 fw_rev[4];
+ __be32 image_length;
+ __be32 image_crc;
+ __be32 startup_entry;
+} __attribute__((packed, aligned(4)));
+
+/* define task management IU */
+struct pm8001_tmf_task {
+ u8 tmf;
+ u32 tag_of_task_to_be_managed;
+};
+/**
+ * FW Flash Update status values
+ */
+#define FLASH_UPDATE_COMPLETE_PENDING_REBOOT 0x00
+#define FLASH_UPDATE_IN_PROGRESS 0x01
+#define FLASH_UPDATE_HDR_ERR 0x02
+#define FLASH_UPDATE_OFFSET_ERR 0x03
+#define FLASH_UPDATE_CRC_ERR 0x04
+#define FLASH_UPDATE_LENGTH_ERR 0x05
+#define FLASH_UPDATE_HW_ERR 0x06
+#define FLASH_UPDATE_DNLD_NOT_SUPPORTED 0x10
+#define FLASH_UPDATE_DISABLED 0x11
+
+/**
+ * brief param structure for firmware flash update.
+ */
+struct fw_flash_updata_info {
+ u32 cur_image_offset;
+ u32 cur_image_len;
+ u32 total_image_len;
+ struct pm8001_prd sgl;
+};
+
+struct fw_control_info {
+ u32 retcode;/*ret code (status)*/
+ u32 phase;/*ret code phase*/
+ u32 phaseCmplt;/*percent complete for the current
+ update phase */
+ u32 version;/*Hex encoded firmware version number*/
+ u32 offset;/*Used for downloading firmware */
+ u32 len; /*len of buffer*/
+ u32 size;/* Used in OS VPD and Trace get size
+ operations.*/
+ u32 reserved;/* padding required for 64 bit
+ alignment */
+ u8 buffer[1];/* Start of buffer */
+};
+struct fw_control_ex {
+ struct fw_control_info *fw_control;
+ void *buffer;/* keep buffer pointer to be
+ freed when the responce comes*/
+ void *virtAddr;/* keep virtual address of the data */
+ void *usrAddr;/* keep virtual address of the
+ user data */
+ dma_addr_t phys_addr;
+ u32 len; /* len of buffer */
+ void *payload; /* pointer to IOCTL Payload */
+ u8 inProgress;/*if 1 - the IOCTL request is in
+ progress */
+ void *param1;
+ void *param2;
+ void *param3;
+};
+
+/******************** function prototype *********************/
+int pm8001_tag_alloc(struct pm8001_hba_info *pm8001_ha, u32 *tag_out);
+void pm8001_tag_init(struct pm8001_hba_info *pm8001_ha);
+u32 pm8001_get_ncq_tag(struct sas_task *task, u32 *tag);
+void pm8001_ccb_free(struct pm8001_hba_info *pm8001_ha, u32 ccb_idx);
+void pm8001_ccb_task_free(struct pm8001_hba_info *pm8001_ha,
+ struct sas_task *task, struct pm8001_ccb_info *ccb, u32 ccb_idx);
+int pm8001_phy_control(struct asd_sas_phy *sas_phy, enum phy_func func,
+ void *funcdata);
+int pm8001_slave_alloc(struct scsi_device *scsi_dev);
+int pm8001_slave_configure(struct scsi_device *sdev);
+void pm8001_scan_start(struct Scsi_Host *shost);
+int pm8001_scan_finished(struct Scsi_Host *shost, unsigned long time);
+int pm8001_queue_command(struct sas_task *task, const int num,
+ gfp_t gfp_flags);
+int pm8001_abort_task(struct sas_task *task);
+int pm8001_abort_task_set(struct domain_device *dev, u8 *lun);
+int pm8001_clear_aca(struct domain_device *dev, u8 *lun);
+int pm8001_clear_task_set(struct domain_device *dev, u8 *lun);
+int pm8001_dev_found(struct domain_device *dev);
+void pm8001_dev_gone(struct domain_device *dev);
+int pm8001_lu_reset(struct domain_device *dev, u8 *lun);
+int pm8001_I_T_nexus_reset(struct domain_device *dev);
+int pm8001_query_task(struct sas_task *task);
+int pm8001_mem_alloc(struct pci_dev *pdev, void **virt_addr,
+ dma_addr_t *pphys_addr, u32 *pphys_addr_hi, u32 *pphys_addr_lo,
+ u32 mem_size, u32 align);
+
+
+/* ctl shared API */
+extern struct device_attribute *pm8001_host_attrs[];
+
+#endif
+
diff --git a/drivers/scsi/pmcraid.c b/drivers/scsi/pmcraid.c
index 0a97bc9..34c6b89 100644
--- a/drivers/scsi/pmcraid.c
+++ b/drivers/scsi/pmcraid.c
@@ -278,12 +278,17 @@
* pmcraid_change_queue_depth - Change the device's queue depth
* @scsi_dev: scsi device struct
* @depth: depth to set
+ * @reason: calling context
*
* Return value
* actual depth set
*/
-static int pmcraid_change_queue_depth(struct scsi_device *scsi_dev, int depth)
+static int pmcraid_change_queue_depth(struct scsi_device *scsi_dev, int depth,
+ int reason)
{
+ if (reason != SCSI_QDEPTH_DEFAULT)
+ return -EOPNOTSUPP;
+
if (depth > PMCRAID_MAX_CMD_PER_LUN)
depth = PMCRAID_MAX_CMD_PER_LUN;
@@ -3342,7 +3347,7 @@
* @direction : data transfer direction
*
* Return value
- * 0 on sucess, non-zero error code on failure
+ * 0 on success, non-zero error code on failure
*/
static int pmcraid_build_passthrough_ioadls(
struct pmcraid_cmd *cmd,
@@ -3401,7 +3406,7 @@
* @direction: data transfer direction
*
* Return value
- * 0 on sucess, non-zero error code on failure
+ * 0 on success, non-zero error code on failure
*/
static void pmcraid_release_passthrough_ioadls(
struct pmcraid_cmd *cmd,
@@ -3429,7 +3434,7 @@
* @arg: pointer to pmcraid_passthrough_buffer user buffer
*
* Return value
- * 0 on sucess, non-zero error code on failure
+ * 0 on success, non-zero error code on failure
*/
static long pmcraid_ioctl_passthrough(
struct pmcraid_instance *pinstance,
diff --git a/drivers/scsi/pmcraid.h b/drivers/scsi/pmcraid.h
index 3441b3f..2752b56 100644
--- a/drivers/scsi/pmcraid.h
+++ b/drivers/scsi/pmcraid.h
@@ -771,11 +771,11 @@
{0x01180600, IOASC_LOG_LEVEL_MUST,
"Recovered Error, soft media error, sector reassignment suggested"},
{0x015D0000, IOASC_LOG_LEVEL_MUST,
- "Recovered Error, failure prediction thresold exceeded"},
+ "Recovered Error, failure prediction threshold exceeded"},
{0x015D9200, IOASC_LOG_LEVEL_MUST,
- "Recovered Error, soft Cache Card Battery error thresold"},
+ "Recovered Error, soft Cache Card Battery error threshold"},
{0x015D9200, IOASC_LOG_LEVEL_MUST,
- "Recovered Error, soft Cache Card Battery error thresold"},
+ "Recovered Error, soft Cache Card Battery error threshold"},
{0x02048000, IOASC_LOG_LEVEL_MUST,
"Not Ready, IOA Reset Required"},
{0x02408500, IOASC_LOG_LEVEL_MUST,
diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
index fbcb82a..21e2bc4 100644
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -1654,7 +1654,8 @@
fc_vport_set_state(fc_vport, FC_VPORT_LINKDOWN);
}
- if (scsi_add_host(vha->host, &fc_vport->dev)) {
+ if (scsi_add_host_with_dma(vha->host, &fc_vport->dev,
+ &ha->pdev->dev)) {
DEBUG15(printk("scsi(%ld): scsi_add_host failure for VP[%d].\n",
vha->host_no, vha->vp_idx));
goto vport_create_failed_2;
diff --git a/drivers/scsi/qla2xxx/qla_dbg.c b/drivers/scsi/qla2xxx/qla_dbg.c
index cca8e4a..cb2eca4 100644
--- a/drivers/scsi/qla2xxx/qla_dbg.c
+++ b/drivers/scsi/qla2xxx/qla_dbg.c
@@ -377,6 +377,24 @@
return ptr + sizeof(struct qla2xxx_mq_chain);
}
+static void
+qla2xxx_dump_post_process(scsi_qla_host_t *vha, int rval)
+{
+ struct qla_hw_data *ha = vha->hw;
+
+ if (rval != QLA_SUCCESS) {
+ qla_printk(KERN_WARNING, ha,
+ "Failed to dump firmware (%x)!!!\n", rval);
+ ha->fw_dumped = 0;
+ } else {
+ qla_printk(KERN_INFO, ha,
+ "Firmware dump saved to temp buffer (%ld/%p).\n",
+ vha->host_no, ha->fw_dump);
+ ha->fw_dumped = 1;
+ qla2x00_post_uevent_work(vha, QLA_UEVENT_CODE_FW_DUMP);
+ }
+}
+
/**
* qla2300_fw_dump() - Dumps binary data from the 2300 firmware.
* @ha: HA context
@@ -530,17 +548,7 @@
if (rval == QLA_SUCCESS)
qla2xxx_copy_queues(ha, nxt);
- if (rval != QLA_SUCCESS) {
- qla_printk(KERN_WARNING, ha,
- "Failed to dump firmware (%x)!!!\n", rval);
- ha->fw_dumped = 0;
-
- } else {
- qla_printk(KERN_INFO, ha,
- "Firmware dump saved to temp buffer (%ld/%p).\n",
- base_vha->host_no, ha->fw_dump);
- ha->fw_dumped = 1;
- }
+ qla2xxx_dump_post_process(base_vha, rval);
qla2300_fw_dump_failed:
if (!hardware_locked)
@@ -737,17 +745,7 @@
if (rval == QLA_SUCCESS)
qla2xxx_copy_queues(ha, &fw->risc_ram[cnt]);
- if (rval != QLA_SUCCESS) {
- qla_printk(KERN_WARNING, ha,
- "Failed to dump firmware (%x)!!!\n", rval);
- ha->fw_dumped = 0;
-
- } else {
- qla_printk(KERN_INFO, ha,
- "Firmware dump saved to temp buffer (%ld/%p).\n",
- base_vha->host_no, ha->fw_dump);
- ha->fw_dumped = 1;
- }
+ qla2xxx_dump_post_process(base_vha, rval);
qla2100_fw_dump_failed:
if (!hardware_locked)
@@ -984,17 +982,7 @@
qla24xx_copy_eft(ha, nxt);
qla24xx_fw_dump_failed_0:
- if (rval != QLA_SUCCESS) {
- qla_printk(KERN_WARNING, ha,
- "Failed to dump firmware (%x)!!!\n", rval);
- ha->fw_dumped = 0;
-
- } else {
- qla_printk(KERN_INFO, ha,
- "Firmware dump saved to temp buffer (%ld/%p).\n",
- base_vha->host_no, ha->fw_dump);
- ha->fw_dumped = 1;
- }
+ qla2xxx_dump_post_process(base_vha, rval);
qla24xx_fw_dump_failed:
if (!hardware_locked)
@@ -1305,17 +1293,7 @@
}
qla25xx_fw_dump_failed_0:
- if (rval != QLA_SUCCESS) {
- qla_printk(KERN_WARNING, ha,
- "Failed to dump firmware (%x)!!!\n", rval);
- ha->fw_dumped = 0;
-
- } else {
- qla_printk(KERN_INFO, ha,
- "Firmware dump saved to temp buffer (%ld/%p).\n",
- base_vha->host_no, ha->fw_dump);
- ha->fw_dumped = 1;
- }
+ qla2xxx_dump_post_process(base_vha, rval);
qla25xx_fw_dump_failed:
if (!hardware_locked)
@@ -1628,17 +1606,7 @@
}
qla81xx_fw_dump_failed_0:
- if (rval != QLA_SUCCESS) {
- qla_printk(KERN_WARNING, ha,
- "Failed to dump firmware (%x)!!!\n", rval);
- ha->fw_dumped = 0;
-
- } else {
- qla_printk(KERN_INFO, ha,
- "Firmware dump saved to temp buffer (%ld/%p).\n",
- base_vha->host_no, ha->fw_dump);
- ha->fw_dumped = 1;
- }
+ qla2xxx_dump_post_process(base_vha, rval);
qla81xx_fw_dump_failed:
if (!hardware_locked)
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index 2150618..6b9bf23 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -2123,6 +2123,7 @@
QLA_EVT_ASYNC_LOGIN_DONE,
QLA_EVT_ASYNC_LOGOUT,
QLA_EVT_ASYNC_LOGOUT_DONE,
+ QLA_EVT_UEVENT,
};
@@ -2146,6 +2147,10 @@
#define QLA_LOGIO_LOGIN_RETRIED BIT_0
u16 data[2];
} logio;
+ struct {
+ u32 code;
+#define QLA_UEVENT_CODE_FW_DUMP 0
+ } uevent;
} u;
};
@@ -2435,11 +2440,11 @@
dma_addr_t edc_data_dma;
uint16_t edc_data_len;
-#define XGMAC_DATA_SIZE PAGE_SIZE
+#define XGMAC_DATA_SIZE 4096
void *xgmac_data;
dma_addr_t xgmac_data_dma;
-#define DCBX_TLV_DATA_SIZE PAGE_SIZE
+#define DCBX_TLV_DATA_SIZE 4096
void *dcbx_tlv;
dma_addr_t dcbx_tlv_dma;
diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
index f3d1d1a..e218513 100644
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -92,6 +92,7 @@
uint16_t *);
extern int qla2x00_post_async_logout_done_work(struct scsi_qla_host *,
fc_port_t *, uint16_t *);
+extern int qla2x00_post_uevent_work(struct scsi_qla_host *, u32);
extern int qla81xx_restart_mpi_firmware(scsi_qla_host_t *);
@@ -246,7 +247,7 @@
extern int
qla2x00_get_resource_cnts(scsi_qla_host_t *, uint16_t *, uint16_t *,
- uint16_t *, uint16_t *, uint16_t *);
+ uint16_t *, uint16_t *, uint16_t *, uint16_t *);
extern int
qla2x00_get_fcal_position_map(scsi_qla_host_t *ha, char *pos_map);
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 9e3eaac..b74924b 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -277,7 +277,6 @@
vha->marker_needed = 0;
ha->isp_abort_cnt = 0;
ha->beacon_blink_led = 0;
- set_bit(REGISTER_FDMI_NEEDED, &vha->dpc_flags);
set_bit(0, ha->req_qid_map);
set_bit(0, ha->rsp_qid_map);
@@ -1203,7 +1202,7 @@
}
qla2x00_get_resource_cnts(vha, NULL,
&ha->fw_xcb_count, NULL, NULL,
- &ha->max_npiv_vports);
+ &ha->max_npiv_vports, NULL);
if (!fw_major_version && ql2xallocfwdump)
qla2x00_alloc_fw_dump(vha);
@@ -3573,6 +3572,15 @@
ha->isp_abort_cnt = 0;
clear_bit(ISP_ABORT_RETRY, &vha->dpc_flags);
+ if (IS_QLA81XX(ha))
+ qla2x00_get_fw_version(vha,
+ &ha->fw_major_version,
+ &ha->fw_minor_version,
+ &ha->fw_subminor_version,
+ &ha->fw_attributes, &ha->fw_memory_size,
+ ha->mpi_version, &ha->mpi_capabilities,
+ ha->phy_version);
+
if (ha->fce) {
ha->flags.fce_enabled = 1;
memset(ha->fce, 0,
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index b20a716..8049873 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -313,10 +313,11 @@
static char *link_speeds[] = { "1", "2", "?", "4", "8", "10" };
char *link_speed;
uint16_t handle_cnt;
- uint16_t cnt;
+ uint16_t cnt, mbx;
uint32_t handles[5];
struct qla_hw_data *ha = vha->hw;
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
+ struct device_reg_24xx __iomem *reg24 = &ha->iobase->isp24;
uint32_t rscn_entry, host_pid;
uint8_t rscn_queue_index;
unsigned long flags;
@@ -395,9 +396,10 @@
break;
case MBA_SYSTEM_ERR: /* System Error */
+ mbx = IS_QLA81XX(ha) ? RD_REG_WORD(®24->mailbox7) : 0;
qla_printk(KERN_INFO, ha,
- "ISP System Error - mbx1=%xh mbx2=%xh mbx3=%xh.\n",
- mb[1], mb[2], mb[3]);
+ "ISP System Error - mbx1=%xh mbx2=%xh mbx3=%xh "
+ "mbx7=%xh.\n", mb[1], mb[2], mb[3], mbx);
ha->isp_ops->fw_dump(vha, 1);
@@ -419,9 +421,10 @@
break;
case MBA_REQ_TRANSFER_ERR: /* Request Transfer Error */
- DEBUG2(printk("scsi(%ld): ISP Request Transfer Error.\n",
- vha->host_no));
- qla_printk(KERN_WARNING, ha, "ISP Request Transfer Error.\n");
+ DEBUG2(printk("scsi(%ld): ISP Request Transfer Error (%x).\n",
+ vha->host_no, mb[1]));
+ qla_printk(KERN_WARNING, ha,
+ "ISP Request Transfer Error (%x).\n", mb[1]);
set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
break;
@@ -485,10 +488,13 @@
break;
case MBA_LOOP_DOWN: /* Loop Down Event */
+ mbx = IS_QLA81XX(ha) ? RD_REG_WORD(®24->mailbox4) : 0;
DEBUG2(printk("scsi(%ld): Asynchronous LOOP DOWN "
- "(%x %x %x).\n", vha->host_no, mb[1], mb[2], mb[3]));
- qla_printk(KERN_INFO, ha, "LOOP DOWN detected (%x %x %x).\n",
- mb[1], mb[2], mb[3]);
+ "(%x %x %x %x).\n", vha->host_no, mb[1], mb[2], mb[3],
+ mbx));
+ qla_printk(KERN_INFO, ha,
+ "LOOP DOWN detected (%x %x %x %x).\n", mb[1], mb[2], mb[3],
+ mbx);
if (atomic_read(&vha->loop_state) != LOOP_DOWN) {
atomic_set(&vha->loop_state, LOOP_DOWN);
@@ -1347,16 +1353,22 @@
sense_len = rsp_info_len = resid_len = fw_resid_len = 0;
if (IS_FWI2_CAPABLE(ha)) {
- sense_len = le32_to_cpu(sts24->sense_len);
- rsp_info_len = le32_to_cpu(sts24->rsp_data_len);
- resid_len = le32_to_cpu(sts24->rsp_residual_count);
- fw_resid_len = le32_to_cpu(sts24->residual_len);
+ if (scsi_status & SS_SENSE_LEN_VALID)
+ sense_len = le32_to_cpu(sts24->sense_len);
+ if (scsi_status & SS_RESPONSE_INFO_LEN_VALID)
+ rsp_info_len = le32_to_cpu(sts24->rsp_data_len);
+ if (scsi_status & (SS_RESIDUAL_UNDER | SS_RESIDUAL_OVER))
+ resid_len = le32_to_cpu(sts24->rsp_residual_count);
+ if (comp_status == CS_DATA_UNDERRUN)
+ fw_resid_len = le32_to_cpu(sts24->residual_len);
rsp_info = sts24->data;
sense_data = sts24->data;
host_to_fcp_swap(sts24->data, sizeof(sts24->data));
} else {
- sense_len = le16_to_cpu(sts->req_sense_length);
- rsp_info_len = le16_to_cpu(sts->rsp_info_len);
+ if (scsi_status & SS_SENSE_LEN_VALID)
+ sense_len = le16_to_cpu(sts->req_sense_length);
+ if (scsi_status & SS_RESPONSE_INFO_LEN_VALID)
+ rsp_info_len = le16_to_cpu(sts->rsp_info_len);
resid_len = le32_to_cpu(sts->residual_length);
rsp_info = sts->rsp_info;
sense_data = sts->req_sense_data;
@@ -1443,38 +1455,62 @@
break;
case CS_DATA_UNDERRUN:
- resid = resid_len;
+ DEBUG2(printk(KERN_INFO
+ "scsi(%ld:%d:%d) UNDERRUN status detected 0x%x-0x%x. "
+ "resid=0x%x fw_resid=0x%x cdb=0x%x os_underflow=0x%x\n",
+ vha->host_no, cp->device->id, cp->device->lun, comp_status,
+ scsi_status, resid_len, fw_resid_len, cp->cmnd[0],
+ cp->underflow));
+
/* Use F/W calculated residual length. */
- if (IS_FWI2_CAPABLE(ha)) {
- if (!(scsi_status & SS_RESIDUAL_UNDER)) {
- lscsi_status = 0;
- } else if (resid != fw_resid_len) {
- scsi_status &= ~SS_RESIDUAL_UNDER;
- lscsi_status = 0;
- }
- resid = fw_resid_len;
- }
-
+ resid = IS_FWI2_CAPABLE(ha) ? fw_resid_len : resid_len;
+ scsi_set_resid(cp, resid);
if (scsi_status & SS_RESIDUAL_UNDER) {
- scsi_set_resid(cp, resid);
- } else {
- DEBUG2(printk(KERN_INFO
- "scsi(%ld:%d:%d) UNDERRUN status detected "
- "0x%x-0x%x. resid=0x%x fw_resid=0x%x cdb=0x%x "
- "os_underflow=0x%x\n", vha->host_no,
- cp->device->id, cp->device->lun, comp_status,
- scsi_status, resid_len, resid, cp->cmnd[0],
- cp->underflow));
+ if (IS_FWI2_CAPABLE(ha) && fw_resid_len != resid_len) {
+ DEBUG2(printk(
+ "scsi(%ld:%d:%d:%d) Dropped frame(s) "
+ "detected (%x of %x bytes)...residual "
+ "length mismatch...retrying command.\n",
+ vha->host_no, cp->device->channel,
+ cp->device->id, cp->device->lun, resid,
+ scsi_bufflen(cp)));
+ cp->result = DID_ERROR << 16 | lscsi_status;
+ break;
+ }
+
+ if (!lscsi_status &&
+ ((unsigned)(scsi_bufflen(cp) - resid) <
+ cp->underflow)) {
+ qla_printk(KERN_INFO, ha,
+ "scsi(%ld:%d:%d:%d): Mid-layer underflow "
+ "detected (%x of %x bytes)...returning "
+ "error status.\n", vha->host_no,
+ cp->device->channel, cp->device->id,
+ cp->device->lun, resid, scsi_bufflen(cp));
+
+ cp->result = DID_ERROR << 16;
+ break;
+ }
+ } else if (!lscsi_status) {
+ DEBUG2(printk(
+ "scsi(%ld:%d:%d:%d) Dropped frame(s) detected "
+ "(%x of %x bytes)...firmware reported underrun..."
+ "retrying command.\n", vha->host_no,
+ cp->device->channel, cp->device->id,
+ cp->device->lun, resid, scsi_bufflen(cp)));
+
+ cp->result = DID_ERROR << 16;
+ break;
}
+ cp->result = DID_OK << 16 | lscsi_status;
+
/*
* Check to see if SCSI Status is non zero. If so report SCSI
* Status.
*/
if (lscsi_status != 0) {
- cp->result = DID_OK << 16 | lscsi_status;
-
if (lscsi_status == SAM_STAT_TASK_SET_FULL) {
DEBUG2(printk(KERN_INFO
"scsi(%ld): QUEUE FULL status detected "
@@ -1501,42 +1537,6 @@
break;
qla2x00_handle_sense(sp, sense_data, sense_len, rsp);
- } else {
- /*
- * If RISC reports underrun and target does not report
- * it then we must have a lost frame, so tell upper
- * layer to retry it by reporting an error.
- */
- if (!(scsi_status & SS_RESIDUAL_UNDER)) {
- DEBUG2(printk("scsi(%ld:%d:%d:%d) Dropped "
- "frame(s) detected (%x of %x bytes)..."
- "retrying command.\n",
- vha->host_no, cp->device->channel,
- cp->device->id, cp->device->lun, resid,
- scsi_bufflen(cp)));
-
- scsi_set_resid(cp, resid);
- cp->result = DID_ERROR << 16;
- break;
- }
-
- /* Handle mid-layer underflow */
- if ((unsigned)(scsi_bufflen(cp) - resid) <
- cp->underflow) {
- qla_printk(KERN_INFO, ha,
- "scsi(%ld:%d:%d:%d): Mid-layer underflow "
- "detected (%x of %x bytes)...returning "
- "error status.\n", vha->host_no,
- cp->device->channel, cp->device->id,
- cp->device->lun, resid,
- scsi_bufflen(cp));
-
- cp->result = DID_ERROR << 16;
- break;
- }
-
- /* Everybody online, looking good... */
- cp->result = DID_OK << 16;
}
break;
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index b6202fe..05d595d 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -2006,7 +2006,7 @@
int
qla2x00_get_resource_cnts(scsi_qla_host_t *vha, uint16_t *cur_xchg_cnt,
uint16_t *orig_xchg_cnt, uint16_t *cur_iocb_cnt,
- uint16_t *orig_iocb_cnt, uint16_t *max_npiv_vports)
+ uint16_t *orig_iocb_cnt, uint16_t *max_npiv_vports, uint16_t *max_fcfs)
{
int rval;
mbx_cmd_t mc;
@@ -2017,6 +2017,8 @@
mcp->mb[0] = MBC_GET_RESOURCE_COUNTS;
mcp->out_mb = MBX_0;
mcp->in_mb = MBX_11|MBX_10|MBX_7|MBX_6|MBX_3|MBX_2|MBX_1|MBX_0;
+ if (IS_QLA81XX(vha->hw))
+ mcp->in_mb |= MBX_12;
mcp->tov = MBX_TOV_SECONDS;
mcp->flags = 0;
rval = qla2x00_mailbox_command(vha, mcp);
@@ -2027,9 +2029,10 @@
vha->host_no, mcp->mb[0]));
} else {
DEBUG11(printk("%s(%ld): done. mb1=%x mb2=%x mb3=%x mb6=%x "
- "mb7=%x mb10=%x mb11=%x.\n", __func__, vha->host_no,
- mcp->mb[1], mcp->mb[2], mcp->mb[3], mcp->mb[6], mcp->mb[7],
- mcp->mb[10], mcp->mb[11]));
+ "mb7=%x mb10=%x mb11=%x mb12=%x.\n", __func__,
+ vha->host_no, mcp->mb[1], mcp->mb[2], mcp->mb[3],
+ mcp->mb[6], mcp->mb[7], mcp->mb[10], mcp->mb[11],
+ mcp->mb[12]));
if (cur_xchg_cnt)
*cur_xchg_cnt = mcp->mb[3];
@@ -2041,6 +2044,8 @@
*orig_iocb_cnt = mcp->mb[10];
if (vha->hw->flags.npiv_supported && max_npiv_vports)
*max_npiv_vports = mcp->mb[11];
+ if (IS_QLA81XX(vha->hw) && max_fcfs)
+ *max_fcfs = mcp->mb[12];
}
return (rval);
@@ -2313,6 +2318,7 @@
{
int rval, rval2;
struct tsk_mgmt_cmd *tsk;
+ struct sts_entry_24xx *sts;
dma_addr_t tsk_dma;
scsi_qla_host_t *vha;
struct qla_hw_data *ha;
@@ -2352,20 +2358,37 @@
sizeof(tsk->p.tsk.lun));
}
+ sts = &tsk->p.sts;
rval = qla2x00_issue_iocb(vha, tsk, tsk_dma, 0);
if (rval != QLA_SUCCESS) {
DEBUG2_3_11(printk("%s(%ld): failed to issue %s Reset IOCB "
"(%x).\n", __func__, vha->host_no, name, rval));
- } else if (tsk->p.sts.entry_status != 0) {
+ } else if (sts->entry_status != 0) {
DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB "
"-- error status (%x).\n", __func__, vha->host_no,
- tsk->p.sts.entry_status));
+ sts->entry_status));
rval = QLA_FUNCTION_FAILED;
- } else if (tsk->p.sts.comp_status !=
+ } else if (sts->comp_status !=
__constant_cpu_to_le16(CS_COMPLETE)) {
DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB "
"-- completion status (%x).\n", __func__,
- vha->host_no, le16_to_cpu(tsk->p.sts.comp_status)));
+ vha->host_no, le16_to_cpu(sts->comp_status)));
+ rval = QLA_FUNCTION_FAILED;
+ } else if (!(le16_to_cpu(sts->scsi_status) &
+ SS_RESPONSE_INFO_LEN_VALID)) {
+ DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB "
+ "-- no response info (%x).\n", __func__, vha->host_no,
+ le16_to_cpu(sts->scsi_status)));
+ rval = QLA_FUNCTION_FAILED;
+ } else if (le32_to_cpu(sts->rsp_data_len) < 4) {
+ DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB "
+ "-- not enough response info (%d).\n", __func__,
+ vha->host_no, le32_to_cpu(sts->rsp_data_len)));
+ rval = QLA_FUNCTION_FAILED;
+ } else if (sts->data[3]) {
+ DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB "
+ "-- response (%x).\n", __func__,
+ vha->host_no, sts->data[3]));
rval = QLA_FUNCTION_FAILED;
}
@@ -2759,8 +2782,10 @@
vp_idx, MSB(stat),
rptid_entry->port_id[2], rptid_entry->port_id[1],
rptid_entry->port_id[0]));
- if (vp_idx == 0)
- return;
+
+ vp = vha;
+ if (vp_idx == 0 && (MSB(stat) != 1))
+ goto reg_needed;
if (MSB(stat) == 1) {
DEBUG2(printk("scsi(%ld): Could not acquire ID for "
@@ -2783,8 +2808,11 @@
* response queue. Handle it in dpc context.
*/
set_bit(VP_IDX_ACQUIRED, &vp->vp_flags);
- set_bit(VP_DPC_NEEDED, &vha->dpc_flags);
+reg_needed:
+ set_bit(REGISTER_FC4_NEEDED, &vp->dpc_flags);
+ set_bit(REGISTER_FDMI_NEEDED, &vp->dpc_flags);
+ set_bit(VP_DPC_NEEDED, &vha->dpc_flags);
qla2xxx_wake_dpc(vha);
}
}
diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c
index e07b361..a47d343 100644
--- a/drivers/scsi/qla2xxx/qla_mid.c
+++ b/drivers/scsi/qla2xxx/qla_mid.c
@@ -382,8 +382,6 @@
vha->mgmt_svr_loop_id = 10 + vha->vp_idx;
vha->dpc_flags = 0L;
- set_bit(REGISTER_FDMI_NEEDED, &vha->dpc_flags);
- set_bit(REGISTER_FC4_NEEDED, &vha->dpc_flags);
/*
* To fix the issue of processing a parent's RSCN for the vport before
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index b79fca7..4166935 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -11,6 +11,7 @@
#include <linux/delay.h>
#include <linux/kthread.h>
#include <linux/mutex.h>
+#include <linux/kobject.h>
#include <scsi/scsi_tcq.h>
#include <scsi/scsicam.h>
@@ -137,7 +138,7 @@
static int qla2xxx_eh_bus_reset(struct scsi_cmnd *);
static int qla2xxx_eh_host_reset(struct scsi_cmnd *);
-static int qla2x00_change_queue_depth(struct scsi_device *, int);
+static int qla2x00_change_queue_depth(struct scsi_device *, int, int);
static int qla2x00_change_queue_type(struct scsi_device *, int);
struct scsi_host_template qla2xxx_driver_template = {
@@ -727,23 +728,6 @@
spin_unlock_irqrestore(&ha->hardware_lock, flags);
}
-static void
-qla2x00_block_error_handler(struct scsi_cmnd *cmnd)
-{
- struct Scsi_Host *shost = cmnd->device->host;
- struct fc_rport *rport = starget_to_rport(scsi_target(cmnd->device));
- unsigned long flags;
-
- spin_lock_irqsave(shost->host_lock, flags);
- while (rport->port_state == FC_PORTSTATE_BLOCKED) {
- spin_unlock_irqrestore(shost->host_lock, flags);
- msleep(1000);
- spin_lock_irqsave(shost->host_lock, flags);
- }
- spin_unlock_irqrestore(shost->host_lock, flags);
- return;
-}
-
/**************************************************************************
* qla2xxx_eh_abort
*
@@ -773,7 +757,7 @@
struct req_que *req = vha->req;
srb_t *spt;
- qla2x00_block_error_handler(cmd);
+ fc_block_scsi_eh(cmd);
if (!CMD_SP(cmd))
return SUCCESS;
@@ -904,7 +888,7 @@
fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata;
int err;
- qla2x00_block_error_handler(cmd);
+ fc_block_scsi_eh(cmd);
if (!fcport)
return FAILED;
@@ -984,7 +968,7 @@
unsigned long serial;
srb_t *sp = (srb_t *) CMD_SP(cmd);
- qla2x00_block_error_handler(cmd);
+ fc_block_scsi_eh(cmd);
id = cmd->device->id;
lun = cmd->device->lun;
@@ -1047,7 +1031,7 @@
srb_t *sp = (srb_t *) CMD_SP(cmd);
scsi_qla_host_t *base_vha = pci_get_drvdata(ha->pdev);
- qla2x00_block_error_handler(cmd);
+ fc_block_scsi_eh(cmd);
id = cmd->device->id;
lun = cmd->device->lun;
@@ -1234,8 +1218,11 @@
}
static int
-qla2x00_change_queue_depth(struct scsi_device *sdev, int qdepth)
+qla2x00_change_queue_depth(struct scsi_device *sdev, int qdepth, int reason)
{
+ if (reason != SCSI_QDEPTH_DEFAULT)
+ return -EOPNOTSUPP;
+
scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), qdepth);
return sdev->queue_depth;
}
@@ -2653,6 +2640,37 @@
qla2x00_post_async_work(logout, QLA_EVT_ASYNC_LOGOUT);
qla2x00_post_async_work(logout_done, QLA_EVT_ASYNC_LOGOUT_DONE);
+int
+qla2x00_post_uevent_work(struct scsi_qla_host *vha, u32 code)
+{
+ struct qla_work_evt *e;
+
+ e = qla2x00_alloc_work(vha, QLA_EVT_UEVENT);
+ if (!e)
+ return QLA_FUNCTION_FAILED;
+
+ e->u.uevent.code = code;
+ return qla2x00_post_work(vha, e);
+}
+
+static void
+qla2x00_uevent_emit(struct scsi_qla_host *vha, u32 code)
+{
+ char event_string[40];
+ char *envp[] = { event_string, NULL };
+
+ switch (code) {
+ case QLA_UEVENT_CODE_FW_DUMP:
+ snprintf(event_string, sizeof(event_string), "FW_DUMP=%ld",
+ vha->host_no);
+ break;
+ default:
+ /* do nothing */
+ break;
+ }
+ kobject_uevent_env(&vha->hw->pdev->dev.kobj, KOBJ_CHANGE, envp);
+}
+
void
qla2x00_do_work(struct scsi_qla_host *vha)
{
@@ -2690,6 +2708,9 @@
qla2x00_async_logout_done(vha, e->u.logio.fcport,
e->u.logio.data);
break;
+ case QLA_EVT_UEVENT:
+ qla2x00_uevent_emit(vha, e->u.uevent.code);
+ break;
}
if (e->flags & QLA_EVT_FLAG_FREE)
kfree(e);
diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h
index ac107a2..807e0db 100644
--- a/drivers/scsi/qla2xxx/qla_version.h
+++ b/drivers/scsi/qla2xxx/qla_version.h
@@ -7,7 +7,7 @@
/*
* Driver version
*/
-#define QLA2XXX_VERSION "8.03.01-k6"
+#define QLA2XXX_VERSION "8.03.01-k7"
#define QLA_DRIVER_MAJOR_VER 8
#define QLA_DRIVER_MINOR_VER 3
diff --git a/drivers/scsi/qlogicpti.h b/drivers/scsi/qlogicpti.h
index 9c053bb..e3c74d1 100644
--- a/drivers/scsi/qlogicpti.h
+++ b/drivers/scsi/qlogicpti.h
@@ -43,7 +43,7 @@
* determined for each queue request anew.
*/
#define QLOGICPTI_REQ_QUEUE_LEN 255 /* must be power of two - 1 */
-#define QLOGICPTI_MAX_SG(ql) (4 + ((ql) > 0) ? 7*((ql) - 1) : 0)
+#define QLOGICPTI_MAX_SG(ql) (4 + (((ql) > 0) ? 7*((ql) - 1) : 0))
/* mailbox command complete status codes */
#define MBOX_COMMAND_COMPLETE 0x4000
diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c
index dd098ca..a60da55 100644
--- a/drivers/scsi/scsi.c
+++ b/drivers/scsi/scsi.c
@@ -940,10 +940,16 @@
*/
int scsi_track_queue_full(struct scsi_device *sdev, int depth)
{
- if ((jiffies >> 4) == sdev->last_queue_full_time)
+
+ /*
+ * Don't let QUEUE_FULLs on the same
+ * jiffies count, they could all be from
+ * same event.
+ */
+ if ((jiffies >> 4) == (sdev->last_queue_full_time >> 4))
return 0;
- sdev->last_queue_full_time = (jiffies >> 4);
+ sdev->last_queue_full_time = jiffies;
if (sdev->last_queue_full_depth != depth) {
sdev->last_queue_full_count = 1;
sdev->last_queue_full_depth = depth;
diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c
index c4103be..0b575c8 100644
--- a/drivers/scsi/scsi_debug.c
+++ b/drivers/scsi/scsi_debug.c
@@ -44,6 +44,8 @@
#include <net/checksum.h>
+#include <asm/unaligned.h>
+
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_device.h>
@@ -105,6 +107,10 @@
#define DEF_ATO 1
#define DEF_PHYSBLK_EXP 0
#define DEF_LOWEST_ALIGNED 0
+#define DEF_UNMAP_MAX_BLOCKS 0
+#define DEF_UNMAP_MAX_DESC 0
+#define DEF_UNMAP_GRANULARITY 0
+#define DEF_UNMAP_ALIGNMENT 0
/* bit mask values for scsi_debug_opts */
#define SCSI_DEBUG_OPT_NOISE 1
@@ -162,6 +168,10 @@
static int scsi_debug_ato = DEF_ATO;
static int scsi_debug_physblk_exp = DEF_PHYSBLK_EXP;
static int scsi_debug_lowest_aligned = DEF_LOWEST_ALIGNED;
+static int scsi_debug_unmap_max_desc = DEF_UNMAP_MAX_DESC;
+static int scsi_debug_unmap_max_blocks = DEF_UNMAP_MAX_BLOCKS;
+static int scsi_debug_unmap_granularity = DEF_UNMAP_GRANULARITY;
+static int scsi_debug_unmap_alignment = DEF_UNMAP_ALIGNMENT;
static int scsi_debug_cmnd_count = 0;
@@ -223,7 +233,9 @@
static unsigned char * fake_storep; /* ramdisk storage */
static unsigned char *dif_storep; /* protection info */
+static void *map_storep; /* provisioning map */
+static unsigned long map_size;
static int num_aborts = 0;
static int num_dev_resets = 0;
static int num_bus_resets = 0;
@@ -317,6 +329,7 @@
(u32)cmd[28] << 24;
break;
+ case WRITE_SAME_16:
case WRITE_16:
case READ_16:
*lba = (u64)cmd[9] | (u64)cmd[8] << 8 |
@@ -335,6 +348,7 @@
*num = (u32)cmd[9] | (u32)cmd[8] << 8 | (u32)cmd[7] << 16 |
(u32)cmd[6] << 24;
break;
+ case WRITE_SAME:
case WRITE_10:
case READ_10:
case XDWRITEREAD_10:
@@ -671,10 +685,12 @@
}
+/* Block limits VPD page (SBC-3) */
static unsigned char vpdb0_data[] = {
- /* from 4th byte */ 0,0,0,4,
- 0,0,0x4,0,
- 0,0,0,64,
+ /* from 4th byte */ 0,0,0,4, 0,0,0x4,0, 0,0,0,64,
+ 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
+ 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
};
static int inquiry_evpd_b0(unsigned char * arr)
@@ -691,14 +707,40 @@
arr[6] = (sdebug_store_sectors >> 8) & 0xff;
arr[7] = sdebug_store_sectors & 0xff;
}
+
+ if (scsi_debug_unmap_max_desc) {
+ unsigned int blocks;
+
+ if (scsi_debug_unmap_max_blocks)
+ blocks = scsi_debug_unmap_max_blocks;
+ else
+ blocks = 0xffffffff;
+
+ put_unaligned_be32(blocks, &arr[16]);
+ put_unaligned_be32(scsi_debug_unmap_max_desc, &arr[20]);
+ }
+
+ if (scsi_debug_unmap_alignment) {
+ put_unaligned_be32(scsi_debug_unmap_alignment, &arr[28]);
+ arr[28] |= 0x80; /* UGAVALID */
+ }
+
+ if (scsi_debug_unmap_granularity) {
+ put_unaligned_be32(scsi_debug_unmap_granularity, &arr[24]);
+ return 0x3c; /* Mandatory page length for thin provisioning */
+ }
+
return sizeof(vpdb0_data);
}
+/* Block device characteristics VPD page (SBC-3) */
static int inquiry_evpd_b1(unsigned char *arr)
{
memset(arr, 0, 0x3c);
arr[0] = 0;
- arr[1] = 1;
+ arr[1] = 1; /* non rotating medium (e.g. solid state) */
+ arr[2] = 0;
+ arr[3] = 5; /* less than 1.8" */
return 0x3c;
}
@@ -974,6 +1016,10 @@
arr[11] = scsi_debug_sector_size & 0xff;
arr[13] = scsi_debug_physblk_exp & 0xf;
arr[14] = (scsi_debug_lowest_aligned >> 8) & 0x3f;
+
+ if (scsi_debug_unmap_granularity)
+ arr[14] |= 0x80; /* TPE */
+
arr[15] = scsi_debug_lowest_aligned & 0xff;
if (scsi_debug_dif) {
@@ -1887,6 +1933,70 @@
return ret;
}
+static unsigned int map_state(sector_t lba, unsigned int *num)
+{
+ unsigned int granularity, alignment, mapped;
+ sector_t block, next, end;
+
+ granularity = scsi_debug_unmap_granularity;
+ alignment = granularity - scsi_debug_unmap_alignment;
+ block = lba + alignment;
+ do_div(block, granularity);
+
+ mapped = test_bit(block, map_storep);
+
+ if (mapped)
+ next = find_next_zero_bit(map_storep, map_size, block);
+ else
+ next = find_next_bit(map_storep, map_size, block);
+
+ end = next * granularity - scsi_debug_unmap_alignment;
+ *num = end - lba;
+
+ return mapped;
+}
+
+static void map_region(sector_t lba, unsigned int len)
+{
+ unsigned int granularity, alignment;
+ sector_t end = lba + len;
+
+ granularity = scsi_debug_unmap_granularity;
+ alignment = granularity - scsi_debug_unmap_alignment;
+
+ while (lba < end) {
+ sector_t block, rem;
+
+ block = lba + alignment;
+ rem = do_div(block, granularity);
+
+ set_bit(block, map_storep);
+
+ lba += granularity - rem;
+ }
+}
+
+static void unmap_region(sector_t lba, unsigned int len)
+{
+ unsigned int granularity, alignment;
+ sector_t end = lba + len;
+
+ granularity = scsi_debug_unmap_granularity;
+ alignment = granularity - scsi_debug_unmap_alignment;
+
+ while (lba < end) {
+ sector_t block, rem;
+
+ block = lba + alignment;
+ rem = do_div(block, granularity);
+
+ if (rem == 0 && lba + granularity <= end)
+ clear_bit(block, map_storep);
+
+ lba += granularity - rem;
+ }
+}
+
static int resp_write(struct scsi_cmnd *SCpnt, unsigned long long lba,
unsigned int num, struct sdebug_dev_info *devip,
u32 ei_lba)
@@ -1910,6 +2020,8 @@
write_lock_irqsave(&atomic_rw, iflags);
ret = do_device_access(SCpnt, devip, lba, num, 1);
+ if (scsi_debug_unmap_granularity)
+ map_region(lba, num);
write_unlock_irqrestore(&atomic_rw, iflags);
if (-1 == ret)
return (DID_ERROR << 16);
@@ -1917,9 +2029,143 @@
(SCSI_DEBUG_OPT_NOISE & scsi_debug_opts))
printk(KERN_INFO "scsi_debug: write: cdb indicated=%u, "
" IO sent=%d bytes\n", num * scsi_debug_sector_size, ret);
+
return 0;
}
+static int resp_write_same(struct scsi_cmnd *scmd, unsigned long long lba,
+ unsigned int num, struct sdebug_dev_info *devip,
+ u32 ei_lba, unsigned int unmap)
+{
+ unsigned long iflags;
+ unsigned long long i;
+ int ret;
+
+ ret = check_device_access_params(devip, lba, num);
+ if (ret)
+ return ret;
+
+ write_lock_irqsave(&atomic_rw, iflags);
+
+ if (unmap && scsi_debug_unmap_granularity) {
+ unmap_region(lba, num);
+ goto out;
+ }
+
+ /* Else fetch one logical block */
+ ret = fetch_to_dev_buffer(scmd,
+ fake_storep + (lba * scsi_debug_sector_size),
+ scsi_debug_sector_size);
+
+ if (-1 == ret) {
+ write_unlock_irqrestore(&atomic_rw, iflags);
+ return (DID_ERROR << 16);
+ } else if ((ret < (num * scsi_debug_sector_size)) &&
+ (SCSI_DEBUG_OPT_NOISE & scsi_debug_opts))
+ printk(KERN_INFO "scsi_debug: write same: cdb indicated=%u, "
+ " IO sent=%d bytes\n", num * scsi_debug_sector_size, ret);
+
+ /* Copy first sector to remaining blocks */
+ for (i = 1 ; i < num ; i++)
+ memcpy(fake_storep + ((lba + i) * scsi_debug_sector_size),
+ fake_storep + (lba * scsi_debug_sector_size),
+ scsi_debug_sector_size);
+
+ if (scsi_debug_unmap_granularity)
+ map_region(lba, num);
+out:
+ write_unlock_irqrestore(&atomic_rw, iflags);
+
+ return 0;
+}
+
+struct unmap_block_desc {
+ __be64 lba;
+ __be32 blocks;
+ __be32 __reserved;
+};
+
+static int resp_unmap(struct scsi_cmnd * scmd, struct sdebug_dev_info * devip)
+{
+ unsigned char *buf;
+ struct unmap_block_desc *desc;
+ unsigned int i, payload_len, descriptors;
+ int ret;
+
+ ret = check_readiness(scmd, 1, devip);
+ if (ret)
+ return ret;
+
+ payload_len = get_unaligned_be16(&scmd->cmnd[7]);
+ BUG_ON(scsi_bufflen(scmd) != payload_len);
+
+ descriptors = (payload_len - 8) / 16;
+
+ buf = kmalloc(scsi_bufflen(scmd), GFP_ATOMIC);
+ if (!buf)
+ return check_condition_result;
+
+ scsi_sg_copy_to_buffer(scmd, buf, scsi_bufflen(scmd));
+
+ BUG_ON(get_unaligned_be16(&buf[0]) != payload_len - 2);
+ BUG_ON(get_unaligned_be16(&buf[2]) != descriptors * 16);
+
+ desc = (void *)&buf[8];
+
+ for (i = 0 ; i < descriptors ; i++) {
+ unsigned long long lba = get_unaligned_be64(&desc[i].lba);
+ unsigned int num = get_unaligned_be32(&desc[i].blocks);
+
+ ret = check_device_access_params(devip, lba, num);
+ if (ret)
+ goto out;
+
+ unmap_region(lba, num);
+ }
+
+ ret = 0;
+
+out:
+ kfree(buf);
+
+ return ret;
+}
+
+#define SDEBUG_GET_LBA_STATUS_LEN 32
+
+static int resp_get_lba_status(struct scsi_cmnd * scmd,
+ struct sdebug_dev_info * devip)
+{
+ unsigned long long lba;
+ unsigned int alloc_len, mapped, num;
+ unsigned char arr[SDEBUG_GET_LBA_STATUS_LEN];
+ int ret;
+
+ ret = check_readiness(scmd, 1, devip);
+ if (ret)
+ return ret;
+
+ lba = get_unaligned_be64(&scmd->cmnd[2]);
+ alloc_len = get_unaligned_be32(&scmd->cmnd[10]);
+
+ if (alloc_len < 24)
+ return 0;
+
+ ret = check_device_access_params(devip, lba, 1);
+ if (ret)
+ return ret;
+
+ mapped = map_state(lba, &num);
+
+ memset(arr, 0, SDEBUG_GET_LBA_STATUS_LEN);
+ put_unaligned_be32(16, &arr[0]); /* Parameter Data Length */
+ put_unaligned_be64(lba, &arr[8]); /* LBA */
+ put_unaligned_be32(num, &arr[16]); /* Number of blocks */
+ arr[20] = !mapped; /* mapped = 0, unmapped = 1 */
+
+ return fill_from_dev_buffer(scmd, arr, SDEBUG_GET_LBA_STATUS_LEN);
+}
+
#define SDEBUG_RLUN_ARR_SZ 256
static int resp_report_luns(struct scsi_cmnd * scp,
@@ -2430,6 +2676,10 @@
module_param_named(ato, scsi_debug_ato, int, S_IRUGO);
module_param_named(physblk_exp, scsi_debug_physblk_exp, int, S_IRUGO);
module_param_named(lowest_aligned, scsi_debug_lowest_aligned, int, S_IRUGO);
+module_param_named(unmap_max_blocks, scsi_debug_unmap_max_blocks, int, S_IRUGO);
+module_param_named(unmap_max_desc, scsi_debug_unmap_max_desc, int, S_IRUGO);
+module_param_named(unmap_granularity, scsi_debug_unmap_granularity, int, S_IRUGO);
+module_param_named(unmap_alignment, scsi_debug_unmap_alignment, int, S_IRUGO);
MODULE_AUTHOR("Eric Youngdale + Douglas Gilbert");
MODULE_DESCRIPTION("SCSI debug adapter driver");
@@ -2458,6 +2708,10 @@
MODULE_PARM_DESC(dif, "data integrity field type: 0-3 (def=0)");
MODULE_PARM_DESC(guard, "protection checksum: 0=crc, 1=ip (def=0)");
MODULE_PARM_DESC(ato, "application tag ownership: 0=disk 1=host (def=1)");
+MODULE_PARM_DESC(unmap_max_blocks, "max # of blocks can be unmapped in one cmd (def=0)");
+MODULE_PARM_DESC(unmap_max_desc, "max # of ranges that can be unmapped in one cmd (def=0)");
+MODULE_PARM_DESC(unmap_granularity, "thin provisioning granularity in blocks (def=0)");
+MODULE_PARM_DESC(unmap_alignment, "lowest aligned thin provisioning lba (def=0)");
static char sdebug_info[256];
@@ -2816,6 +3070,23 @@
}
DRIVER_ATTR(ato, S_IRUGO, sdebug_ato_show, NULL);
+static ssize_t sdebug_map_show(struct device_driver *ddp, char *buf)
+{
+ ssize_t count;
+
+ if (scsi_debug_unmap_granularity == 0)
+ return scnprintf(buf, PAGE_SIZE, "0-%u\n",
+ sdebug_store_sectors);
+
+ count = bitmap_scnlistprintf(buf, PAGE_SIZE, map_storep, map_size);
+
+ buf[count++] = '\n';
+ buf[count++] = 0;
+
+ return count;
+}
+DRIVER_ATTR(map, S_IRUGO, sdebug_map_show, NULL);
+
/* Note: The following function creates attribute files in the
/sys/bus/pseudo/drivers/scsi_debug directory. The advantage of these
@@ -2847,11 +3118,13 @@
ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_dif);
ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_guard);
ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_ato);
+ ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_map);
return ret;
}
static void do_remove_driverfs_files(void)
{
+ driver_remove_file(&sdebug_driverfs_driver, &driver_attr_map);
driver_remove_file(&sdebug_driverfs_driver, &driver_attr_ato);
driver_remove_file(&sdebug_driverfs_driver, &driver_attr_guard);
driver_remove_file(&sdebug_driverfs_driver, &driver_attr_dif);
@@ -2989,6 +3262,36 @@
memset(dif_storep, 0xff, dif_size);
}
+ if (scsi_debug_unmap_granularity) {
+ unsigned int map_bytes;
+
+ if (scsi_debug_unmap_granularity < scsi_debug_unmap_alignment) {
+ printk(KERN_ERR
+ "%s: ERR: unmap_granularity < unmap_alignment\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ map_size = (sdebug_store_sectors / scsi_debug_unmap_granularity);
+ map_bytes = map_size >> 3;
+ map_storep = vmalloc(map_bytes);
+
+ printk(KERN_INFO "scsi_debug_init: %lu provisioning blocks\n",
+ map_size);
+
+ if (map_storep == NULL) {
+ printk(KERN_ERR "scsi_debug_init: out of mem. (MAP)\n");
+ ret = -ENOMEM;
+ goto free_vm;
+ }
+
+ memset(map_storep, 0x0, map_bytes);
+
+ /* Map first 1KB for partition table */
+ if (scsi_debug_num_parts)
+ map_region(0, 2);
+ }
+
ret = device_register(&pseudo_primary);
if (ret < 0) {
printk(KERN_WARNING "scsi_debug: device_register error: %d\n",
@@ -3041,6 +3344,8 @@
dev_unreg:
device_unregister(&pseudo_primary);
free_vm:
+ if (map_storep)
+ vfree(map_storep);
if (dif_storep)
vfree(dif_storep);
vfree(fake_storep);
@@ -3167,6 +3472,7 @@
int inj_dif = 0;
int inj_dix = 0;
int delay_override = 0;
+ int unmap = 0;
scsi_set_resid(SCpnt, 0);
if ((SCSI_DEBUG_OPT_NOISE & scsi_debug_opts) && cmd) {
@@ -3272,13 +3578,21 @@
errsts = resp_readcap(SCpnt, devip);
break;
case SERVICE_ACTION_IN:
- if (SAI_READ_CAPACITY_16 != cmd[1]) {
+ if (cmd[1] == SAI_READ_CAPACITY_16)
+ errsts = resp_readcap16(SCpnt, devip);
+ else if (cmd[1] == SAI_GET_LBA_STATUS) {
+
+ if (scsi_debug_unmap_max_desc == 0) {
+ mk_sense_buffer(devip, ILLEGAL_REQUEST,
+ INVALID_COMMAND_OPCODE, 0);
+ errsts = check_condition_result;
+ } else
+ errsts = resp_get_lba_status(SCpnt, devip);
+ } else {
mk_sense_buffer(devip, ILLEGAL_REQUEST,
INVALID_OPCODE, 0);
errsts = check_condition_result;
- break;
}
- errsts = resp_readcap16(SCpnt, devip);
break;
case MAINTENANCE_IN:
if (MI_REPORT_TARGET_PGS != cmd[1]) {
@@ -3378,6 +3692,29 @@
errsts = illegal_condition_result;
}
break;
+ case WRITE_SAME_16:
+ if (cmd[1] & 0x8)
+ unmap = 1;
+ /* fall through */
+ case WRITE_SAME:
+ errsts = check_readiness(SCpnt, 0, devip);
+ if (errsts)
+ break;
+ get_data_transfer_info(cmd, &lba, &num, &ei_lba);
+ errsts = resp_write_same(SCpnt, lba, num, devip, ei_lba, unmap);
+ break;
+ case UNMAP:
+ errsts = check_readiness(SCpnt, 0, devip);
+ if (errsts)
+ break;
+
+ if (scsi_debug_unmap_max_desc == 0) {
+ mk_sense_buffer(devip, ILLEGAL_REQUEST,
+ INVALID_COMMAND_OPCODE, 0);
+ errsts = check_condition_result;
+ } else
+ errsts = resp_unmap(SCpnt, devip);
+ break;
case MODE_SENSE:
case MODE_SENSE_10:
errsts = resp_mode_sense(SCpnt, target, devip);
diff --git a/drivers/scsi/scsi_devinfo.c b/drivers/scsi/scsi_devinfo.c
index 93c2622..37af178 100644
--- a/drivers/scsi/scsi_devinfo.c
+++ b/drivers/scsi/scsi_devinfo.c
@@ -168,11 +168,10 @@
{"Generic", "USB SD Reader", "1.00", BLIST_FORCELUN | BLIST_INQUIRY_36},
{"Generic", "USB Storage-SMC", "0180", BLIST_FORCELUN | BLIST_INQUIRY_36},
{"Generic", "USB Storage-SMC", "0207", BLIST_FORCELUN | BLIST_INQUIRY_36},
- {"HITACHI", "DF400", "*", BLIST_SPARSELUN},
- {"HITACHI", "DF500", "*", BLIST_SPARSELUN},
- {"HITACHI", "DF600", "*", BLIST_SPARSELUN},
- {"HITACHI", "DISK-SUBSYSTEM", "*", BLIST_ATTACH_PQ3 | BLIST_SPARSELUN | BLIST_LARGELUN},
- {"HITACHI", "OPEN-E", "*", BLIST_ATTACH_PQ3 | BLIST_SPARSELUN | BLIST_LARGELUN},
+ {"HITACHI", "DF400", "*", BLIST_REPORTLUN2},
+ {"HITACHI", "DF500", "*", BLIST_REPORTLUN2},
+ {"HITACHI", "DISK-SUBSYSTEM", "*", BLIST_REPORTLUN2},
+ {"HITACHI", "OPEN-", "*", BLIST_REPORTLUN2},
{"HITACHI", "OP-C-", "*", BLIST_SPARSELUN | BLIST_LARGELUN},
{"HITACHI", "3380-", "*", BLIST_SPARSELUN | BLIST_LARGELUN},
{"HITACHI", "3390-", "*", BLIST_SPARSELUN | BLIST_LARGELUN},
@@ -454,7 +453,7 @@
/**
- * get_device_flags_keyed - get device specific flags from the dynamic device list.
+ * scsi_get_device_flags_keyed - get device specific flags from the dynamic device list
* @sdev: &scsi_device to get flags for
* @vendor: vendor name
* @model: model name
@@ -685,7 +684,7 @@
"scsi default device flag integer value");
/**
- * scsi_dev_info_list_delete - called from scsi.c:exit_scsi to remove the scsi_dev_info_list.
+ * scsi_exit_devinfo - remove /proc/scsi/device_info & the scsi_dev_info_list
**/
void scsi_exit_devinfo(void)
{
diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index 1b0060b..08ed506 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -331,6 +331,64 @@
}
}
+static void scsi_handle_queue_ramp_up(struct scsi_device *sdev)
+{
+ struct scsi_host_template *sht = sdev->host->hostt;
+ struct scsi_device *tmp_sdev;
+
+ if (!sht->change_queue_depth ||
+ sdev->queue_depth >= sdev->max_queue_depth)
+ return;
+
+ if (time_before(jiffies,
+ sdev->last_queue_ramp_up + sdev->queue_ramp_up_period))
+ return;
+
+ if (time_before(jiffies,
+ sdev->last_queue_full_time + sdev->queue_ramp_up_period))
+ return;
+
+ /*
+ * Walk all devices of a target and do
+ * ramp up on them.
+ */
+ shost_for_each_device(tmp_sdev, sdev->host) {
+ if (tmp_sdev->channel != sdev->channel ||
+ tmp_sdev->id != sdev->id ||
+ tmp_sdev->queue_depth == sdev->max_queue_depth)
+ continue;
+ /*
+ * call back into LLD to increase queue_depth by one
+ * with ramp up reason code.
+ */
+ sht->change_queue_depth(tmp_sdev, tmp_sdev->queue_depth + 1,
+ SCSI_QDEPTH_RAMP_UP);
+ sdev->last_queue_ramp_up = jiffies;
+ }
+}
+
+static void scsi_handle_queue_full(struct scsi_device *sdev)
+{
+ struct scsi_host_template *sht = sdev->host->hostt;
+ struct scsi_device *tmp_sdev;
+
+ if (!sht->change_queue_depth)
+ return;
+
+ shost_for_each_device(tmp_sdev, sdev->host) {
+ if (tmp_sdev->channel != sdev->channel ||
+ tmp_sdev->id != sdev->id)
+ continue;
+ /*
+ * We do not know the number of commands that were at
+ * the device when we got the queue full so we start
+ * from the highest possible value and work our way down.
+ */
+ sht->change_queue_depth(tmp_sdev, tmp_sdev->queue_depth - 1,
+ SCSI_QDEPTH_QFULL);
+ }
+}
+
/**
* scsi_eh_completed_normally - Disposition a eh cmd on return from LLD.
* @scmd: SCSI cmd to examine.
@@ -371,6 +429,7 @@
*/
switch (status_byte(scmd->result)) {
case GOOD:
+ scsi_handle_queue_ramp_up(scmd->device);
case COMMAND_TERMINATED:
return SUCCESS;
case CHECK_CONDITION:
@@ -387,8 +446,10 @@
* let issuer deal with this, it could be just fine
*/
return SUCCESS;
- case BUSY:
case QUEUE_FULL:
+ scsi_handle_queue_full(scmd->device);
+ /* fall through */
+ case BUSY:
default:
return FAILED;
}
@@ -1387,6 +1448,7 @@
*/
switch (status_byte(scmd->result)) {
case QUEUE_FULL:
+ scsi_handle_queue_full(scmd->device);
/*
* the case of trying to send too many commands to a
* tagged queueing device.
@@ -1400,6 +1462,7 @@
*/
return ADD_TO_MLQUEUE;
case GOOD:
+ scsi_handle_queue_ramp_up(scmd->device);
case COMMAND_TERMINATED:
return SUCCESS;
case TASK_ABORTED:
diff --git a/drivers/scsi/scsi_ioctl.c b/drivers/scsi/scsi_ioctl.c
index b98f763..d9564fb 100644
--- a/drivers/scsi/scsi_ioctl.c
+++ b/drivers/scsi/scsi_ioctl.c
@@ -308,6 +308,9 @@
case SG_SCSI_RESET_DEVICE:
val = SCSI_TRY_RESET_DEVICE;
break;
+ case SG_SCSI_RESET_TARGET:
+ val = SCSI_TRY_RESET_TARGET;
+ break;
case SG_SCSI_RESET_BUS:
val = SCSI_TRY_RESET_BUS;
break;
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index 5987da8..e495d38 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -898,7 +898,7 @@
scsi_print_sense("", cmd);
scsi_print_command(cmd);
}
- if (blk_end_request_err(req, -EIO))
+ if (blk_end_request_err(req, error))
scsi_requeue_command(q, cmd);
else
scsi_next_command(cmd);
@@ -1359,9 +1359,9 @@
static void scsi_kill_request(struct request *req, struct request_queue *q)
{
struct scsi_cmnd *cmd = req->special;
- struct scsi_device *sdev = cmd->device;
- struct scsi_target *starget = scsi_target(sdev);
- struct Scsi_Host *shost = sdev->host;
+ struct scsi_device *sdev;
+ struct scsi_target *starget;
+ struct Scsi_Host *shost;
blk_start_request(req);
@@ -1371,6 +1371,9 @@
BUG();
}
+ sdev = cmd->device;
+ starget = scsi_target(sdev);
+ shost = sdev->host;
scsi_init_cmd_errh(cmd);
cmd->result = DID_NO_CONNECT << 16;
atomic_inc(&cmd->device->iorequest_cnt);
diff --git a/drivers/scsi/scsi_lib_dma.c b/drivers/scsi/scsi_lib_dma.c
index ac6855c..dcd1285 100644
--- a/drivers/scsi/scsi_lib_dma.c
+++ b/drivers/scsi/scsi_lib_dma.c
@@ -23,7 +23,7 @@
int nseg = 0;
if (scsi_sg_count(cmd)) {
- struct device *dev = cmd->device->host->shost_gendev.parent;
+ struct device *dev = cmd->device->host->dma_dev;
nseg = dma_map_sg(dev, scsi_sglist(cmd), scsi_sg_count(cmd),
cmd->sc_data_direction);
@@ -41,7 +41,7 @@
void scsi_dma_unmap(struct scsi_cmnd *cmd)
{
if (scsi_sg_count(cmd)) {
- struct device *dev = cmd->device->host->shost_gendev.parent;
+ struct device *dev = cmd->device->host->dma_dev;
dma_unmap_sg(dev, scsi_sglist(cmd), scsi_sg_count(cmd),
cmd->sc_data_direction);
diff --git a/drivers/scsi/scsi_netlink.c b/drivers/scsi/scsi_netlink.c
index 723fdec..0fd6ae6 100644
--- a/drivers/scsi/scsi_netlink.c
+++ b/drivers/scsi/scsi_netlink.c
@@ -613,7 +613,7 @@
* @data_buf: pointer to vendor unique data buffer
*
* Returns:
- * 0 on succesful return
+ * 0 on successful return
* otherwise, failing error code
*
* Notes:
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index 47291bc..012f73a 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -251,6 +251,7 @@
sdev->model = scsi_null_device_strs;
sdev->rev = scsi_null_device_strs;
sdev->host = shost;
+ sdev->queue_ramp_up_period = SCSI_DEFAULT_RAMP_UP_PERIOD;
sdev->id = starget->id;
sdev->lun = lun;
sdev->channel = starget->channel;
@@ -941,6 +942,8 @@
}
}
+ sdev->max_queue_depth = sdev->queue_depth;
+
/*
* Ok, the device is now all set up, we can
* register it and tell the rest of the kernel
diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
index 392d8db..5a06505 100644
--- a/drivers/scsi/scsi_sysfs.c
+++ b/drivers/scsi/scsi_sysfs.c
@@ -766,10 +766,13 @@
if (depth < 1)
return -EINVAL;
- retval = sht->change_queue_depth(sdev, depth);
+ retval = sht->change_queue_depth(sdev, depth,
+ SCSI_QDEPTH_DEFAULT);
if (retval < 0)
return retval;
+ sdev->max_queue_depth = sdev->queue_depth;
+
return count;
}
@@ -778,6 +781,37 @@
sdev_store_queue_depth_rw);
static ssize_t
+sdev_show_queue_ramp_up_period(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct scsi_device *sdev;
+ sdev = to_scsi_device(dev);
+ return snprintf(buf, 20, "%u\n",
+ jiffies_to_msecs(sdev->queue_ramp_up_period));
+}
+
+static ssize_t
+sdev_store_queue_ramp_up_period(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct scsi_device *sdev = to_scsi_device(dev);
+ unsigned long period;
+
+ if (strict_strtoul(buf, 10, &period))
+ return -EINVAL;
+
+ sdev->queue_ramp_up_period = msecs_to_jiffies(period);
+ return period;
+}
+
+static struct device_attribute sdev_attr_queue_ramp_up_period =
+ __ATTR(queue_ramp_up_period, S_IRUGO | S_IWUSR,
+ sdev_show_queue_ramp_up_period,
+ sdev_store_queue_ramp_up_period);
+
+static ssize_t
sdev_store_queue_type_rw(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
@@ -867,8 +901,12 @@
sdev->is_visible = 1;
/* create queue files, which may be writable, depending on the host */
- if (sdev->host->hostt->change_queue_depth)
- error = device_create_file(&sdev->sdev_gendev, &sdev_attr_queue_depth_rw);
+ if (sdev->host->hostt->change_queue_depth) {
+ error = device_create_file(&sdev->sdev_gendev,
+ &sdev_attr_queue_depth_rw);
+ error = device_create_file(&sdev->sdev_gendev,
+ &sdev_attr_queue_ramp_up_period);
+ }
else
error = device_create_file(&sdev->sdev_gendev, &dev_attr_queue_depth);
if (error)
diff --git a/drivers/scsi/scsi_transport_fc.c b/drivers/scsi/scsi_transport_fc.c
index c6f70da..6531c91 100644
--- a/drivers/scsi/scsi_transport_fc.c
+++ b/drivers/scsi/scsi_transport_fc.c
@@ -27,6 +27,7 @@
*/
#include <linux/module.h>
#include <linux/init.h>
+#include <linux/delay.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_transport.h>
@@ -2384,6 +2385,7 @@
struct Scsi_Host *shost = rport_to_shost(rport);
struct fc_internal *i = to_fc_internal(shost->transportt);
unsigned long flags;
+ int do_callback = 0;
/*
* if a scan is pending, flush the SCSI Host work_q so that
@@ -2422,8 +2424,15 @@
* Avoid this call if we already called it when we preserved the
* rport for the binding.
*/
+ spin_lock_irqsave(shost->host_lock, flags);
if (!(rport->flags & FC_RPORT_DEVLOSS_CALLBK_DONE) &&
- (i->f->dev_loss_tmo_callbk))
+ (i->f->dev_loss_tmo_callbk)) {
+ rport->flags |= FC_RPORT_DEVLOSS_CALLBK_DONE;
+ do_callback = 1;
+ }
+ spin_unlock_irqrestore(shost->host_lock, flags);
+
+ if (do_callback)
i->f->dev_loss_tmo_callbk(rport);
fc_bsg_remove(rport->rqst_q);
@@ -2970,6 +2979,7 @@
struct fc_internal *i = to_fc_internal(shost->transportt);
struct fc_host_attrs *fc_host = shost_to_fc_host(shost);
unsigned long flags;
+ int do_callback = 0;
spin_lock_irqsave(shost->host_lock, flags);
@@ -3035,7 +3045,6 @@
rport->roles = FC_PORT_ROLE_UNKNOWN;
rport->port_state = FC_PORTSTATE_NOTPRESENT;
rport->flags &= ~FC_RPORT_FAST_FAIL_TIMEDOUT;
- rport->flags |= FC_RPORT_DEVLOSS_CALLBK_DONE;
/*
* Pre-emptively kill I/O rather than waiting for the work queue
@@ -3045,32 +3054,40 @@
spin_unlock_irqrestore(shost->host_lock, flags);
fc_terminate_rport_io(rport);
- BUG_ON(rport->port_state != FC_PORTSTATE_NOTPRESENT);
+ spin_lock_irqsave(shost->host_lock, flags);
- /* remove the identifiers that aren't used in the consisting binding */
- switch (fc_host->tgtid_bind_type) {
- case FC_TGTID_BIND_BY_WWPN:
- rport->node_name = -1;
- rport->port_id = -1;
- break;
- case FC_TGTID_BIND_BY_WWNN:
- rport->port_name = -1;
- rport->port_id = -1;
- break;
- case FC_TGTID_BIND_BY_ID:
- rport->node_name = -1;
- rport->port_name = -1;
- break;
- case FC_TGTID_BIND_NONE: /* to keep compiler happy */
- break;
+ if (rport->port_state == FC_PORTSTATE_NOTPRESENT) { /* still missing */
+
+ /* remove the identifiers that aren't used in the consisting binding */
+ switch (fc_host->tgtid_bind_type) {
+ case FC_TGTID_BIND_BY_WWPN:
+ rport->node_name = -1;
+ rport->port_id = -1;
+ break;
+ case FC_TGTID_BIND_BY_WWNN:
+ rport->port_name = -1;
+ rport->port_id = -1;
+ break;
+ case FC_TGTID_BIND_BY_ID:
+ rport->node_name = -1;
+ rport->port_name = -1;
+ break;
+ case FC_TGTID_BIND_NONE: /* to keep compiler happy */
+ break;
+ }
+
+ /*
+ * As this only occurs if the remote port (scsi target)
+ * went away and didn't come back - we'll remove
+ * all attached scsi devices.
+ */
+ rport->flags |= FC_RPORT_DEVLOSS_CALLBK_DONE;
+ fc_queue_work(shost, &rport->stgt_delete_work);
+
+ do_callback = 1;
}
- /*
- * As this only occurs if the remote port (scsi target)
- * went away and didn't come back - we'll remove
- * all attached scsi devices.
- */
- fc_queue_work(shost, &rport->stgt_delete_work);
+ spin_unlock_irqrestore(shost->host_lock, flags);
/*
* Notify the driver that the rport is now dead. The LLDD will
@@ -3078,7 +3095,7 @@
*
* Note: we set the CALLBK_DONE flag above to correspond
*/
- if (i->f->dev_loss_tmo_callbk)
+ if (do_callback && i->f->dev_loss_tmo_callbk)
i->f->dev_loss_tmo_callbk(rport);
}
@@ -3128,6 +3145,31 @@
spin_unlock_irqrestore(shost->host_lock, flags);
}
+/**
+ * fc_block_scsi_eh - Block SCSI eh thread for blocked fc_rport
+ * @cmnd: SCSI command that scsi_eh is trying to recover
+ *
+ * This routine can be called from a FC LLD scsi_eh callback. It
+ * blocks the scsi_eh thread until the fc_rport leaves the
+ * FC_PORTSTATE_BLOCKED. This is necessary to avoid the scsi_eh
+ * failing recovery actions for blocked rports which would lead to
+ * offlined SCSI devices.
+ */
+void fc_block_scsi_eh(struct scsi_cmnd *cmnd)
+{
+ struct Scsi_Host *shost = cmnd->device->host;
+ struct fc_rport *rport = starget_to_rport(scsi_target(cmnd->device));
+ unsigned long flags;
+
+ spin_lock_irqsave(shost->host_lock, flags);
+ while (rport->port_state == FC_PORTSTATE_BLOCKED) {
+ spin_unlock_irqrestore(shost->host_lock, flags);
+ msleep(1000);
+ spin_lock_irqsave(shost->host_lock, flags);
+ }
+ spin_unlock_irqrestore(shost->host_lock, flags);
+}
+EXPORT_SYMBOL(fc_block_scsi_eh);
/**
* fc_vport_setup - allocates and creates a FC virtual port.
@@ -3769,8 +3811,9 @@
return;
while (!blk_queue_plugged(q)) {
- if (rport && (rport->port_state == FC_PORTSTATE_BLOCKED))
- break;
+ if (rport && (rport->port_state == FC_PORTSTATE_BLOCKED) &&
+ !(rport->flags & FC_RPORT_FAST_FAIL_TIMEDOUT))
+ break;
req = blk_fetch_request(q);
if (!req)
diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c
index ad897df..ea3892e 100644
--- a/drivers/scsi/scsi_transport_iscsi.c
+++ b/drivers/scsi/scsi_transport_iscsi.c
@@ -30,7 +30,7 @@
#include <scsi/scsi_transport_iscsi.h>
#include <scsi/iscsi_if.h>
-#define ISCSI_SESSION_ATTRS 21
+#define ISCSI_SESSION_ATTRS 22
#define ISCSI_CONN_ATTRS 13
#define ISCSI_HOST_ATTRS 4
@@ -627,8 +627,10 @@
spin_unlock_irqrestore(&session->lock, flags);
scsi_target_block(&session->dev);
ISCSI_DBG_TRANS_SESSION(session, "Completed SCSI target blocking\n");
- queue_delayed_work(iscsi_eh_timer_workq, &session->recovery_work,
- session->recovery_tmo * HZ);
+ if (session->recovery_tmo >= 0)
+ queue_delayed_work(iscsi_eh_timer_workq,
+ &session->recovery_work,
+ session->recovery_tmo * HZ);
}
void iscsi_block_session(struct iscsi_cls_session *session)
@@ -1348,8 +1350,7 @@
switch (ev->u.set_param.param) {
case ISCSI_PARAM_SESS_RECOVERY_TMO:
sscanf(data, "%d", &value);
- if (value != 0)
- session->recovery_tmo = value;
+ session->recovery_tmo = value;
break;
default:
err = transport->set_param(conn, ev->u.set_param.param,
@@ -1759,6 +1760,7 @@
iscsi_session_attr(fast_abort, ISCSI_PARAM_FAST_ABORT, 0);
iscsi_session_attr(abort_tmo, ISCSI_PARAM_ABORT_TMO, 0);
iscsi_session_attr(lu_reset_tmo, ISCSI_PARAM_LU_RESET_TMO, 0);
+iscsi_session_attr(tgt_reset_tmo, ISCSI_PARAM_TGT_RESET_TMO, 0);
iscsi_session_attr(ifacename, ISCSI_PARAM_IFACE_NAME, 0);
iscsi_session_attr(initiatorname, ISCSI_PARAM_INITIATOR_NAME, 0)
@@ -2000,6 +2002,7 @@
SETUP_SESSION_RD_ATTR(fast_abort, ISCSI_FAST_ABORT);
SETUP_SESSION_RD_ATTR(abort_tmo, ISCSI_ABORT_TMO);
SETUP_SESSION_RD_ATTR(lu_reset_tmo,ISCSI_LU_RESET_TMO);
+ SETUP_SESSION_RD_ATTR(tgt_reset_tmo,ISCSI_TGT_RESET_TMO);
SETUP_SESSION_RD_ATTR(ifacename, ISCSI_IFACE_NAME);
SETUP_SESSION_RD_ATTR(initiatorname, ISCSI_INITIATOR_NAME);
SETUP_PRIV_SESSION_RD_ATTR(recovery_tmo);
diff --git a/drivers/scsi/scsi_transport_sas.c b/drivers/scsi/scsi_transport_sas.c
index fd47cb1..f27e52d 100644
--- a/drivers/scsi/scsi_transport_sas.c
+++ b/drivers/scsi/scsi_transport_sas.c
@@ -666,7 +666,7 @@
*
* Note:
* This function must only be called on a PHY that has not
- * sucessfully been added using sas_phy_add().
+ * successfully been added using sas_phy_add().
*/
void sas_phy_free(struct sas_phy *phy)
{
@@ -896,7 +896,7 @@
*
* Note:
* This function must only be called on a PORT that has not
- * sucessfully been added using sas_port_add().
+ * successfully been added using sas_port_add().
*/
void sas_port_free(struct sas_port *port)
{
@@ -1476,7 +1476,7 @@
*
* Note:
* This function must only be called on a remote
- * PHY that has not sucessfully been added using
+ * PHY that has not successfully been added using
* sas_rphy_add() (or has been sas_rphy_remove()'d)
*/
void sas_rphy_free(struct sas_rphy *rphy)
diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c
index 12d58a7..ad59abb 100644
--- a/drivers/scsi/st.c
+++ b/drivers/scsi/st.c
@@ -2280,7 +2280,8 @@
} else if (code == MT_ST_SET_CLN) {
value = (options & ~MT_ST_OPTIONS) & 0xff;
if (value != 0 &&
- value < EXTENDED_SENSE_START && value >= SCSI_SENSE_BUFFERSIZE)
+ (value < EXTENDED_SENSE_START ||
+ value >= SCSI_SENSE_BUFFERSIZE))
return (-EINVAL);
STp->cln_mode = value;
STp->cln_sense_mask = (options >> 8) & 0xff;
diff --git a/drivers/scsi/stex.c b/drivers/scsi/stex.c
index 09fa886..3058bb1 100644
--- a/drivers/scsi/stex.c
+++ b/drivers/scsi/stex.c
@@ -36,11 +36,11 @@
#include <scsi/scsi_eh.h>
#define DRV_NAME "stex"
-#define ST_DRIVER_VERSION "4.6.0000.3"
+#define ST_DRIVER_VERSION "4.6.0000.4"
#define ST_VER_MAJOR 4
#define ST_VER_MINOR 6
#define ST_OEM 0
-#define ST_BUILD_VER 3
+#define ST_BUILD_VER 4
enum {
/* MU register offset */
@@ -64,24 +64,24 @@
YH2I_REQ_HI = 0xc4,
/* MU register value */
- MU_INBOUND_DOORBELL_HANDSHAKE = 1,
- MU_INBOUND_DOORBELL_REQHEADCHANGED = 2,
- MU_INBOUND_DOORBELL_STATUSTAILCHANGED = 4,
- MU_INBOUND_DOORBELL_HMUSTOPPED = 8,
- MU_INBOUND_DOORBELL_RESET = 16,
+ MU_INBOUND_DOORBELL_HANDSHAKE = (1 << 0),
+ MU_INBOUND_DOORBELL_REQHEADCHANGED = (1 << 1),
+ MU_INBOUND_DOORBELL_STATUSTAILCHANGED = (1 << 2),
+ MU_INBOUND_DOORBELL_HMUSTOPPED = (1 << 3),
+ MU_INBOUND_DOORBELL_RESET = (1 << 4),
- MU_OUTBOUND_DOORBELL_HANDSHAKE = 1,
- MU_OUTBOUND_DOORBELL_REQUESTTAILCHANGED = 2,
- MU_OUTBOUND_DOORBELL_STATUSHEADCHANGED = 4,
- MU_OUTBOUND_DOORBELL_BUSCHANGE = 8,
- MU_OUTBOUND_DOORBELL_HASEVENT = 16,
+ MU_OUTBOUND_DOORBELL_HANDSHAKE = (1 << 0),
+ MU_OUTBOUND_DOORBELL_REQUESTTAILCHANGED = (1 << 1),
+ MU_OUTBOUND_DOORBELL_STATUSHEADCHANGED = (1 << 2),
+ MU_OUTBOUND_DOORBELL_BUSCHANGE = (1 << 3),
+ MU_OUTBOUND_DOORBELL_HASEVENT = (1 << 4),
+ MU_OUTBOUND_DOORBELL_REQUEST_RESET = (1 << 27),
/* MU status code */
MU_STATE_STARTING = 1,
- MU_STATE_FMU_READY_FOR_HANDSHAKE = 2,
- MU_STATE_SEND_HANDSHAKE_FRAME = 3,
- MU_STATE_STARTED = 4,
- MU_STATE_RESETTING = 5,
+ MU_STATE_STARTED = 2,
+ MU_STATE_RESETTING = 3,
+ MU_STATE_FAILED = 4,
MU_MAX_DELAY = 120,
MU_HANDSHAKE_SIGNATURE = 0x55aaaa55,
@@ -111,6 +111,8 @@
SS_H2I_INT_RESET = 0x100,
+ SS_I2H_REQUEST_RESET = 0x2000,
+
SS_MU_OPERATIONAL = 0x80000000,
STEX_CDB_LENGTH = 16,
@@ -160,6 +162,7 @@
INQUIRY_EVPD = 0x01,
ST_ADDITIONAL_MEM = 0x200000,
+ ST_ADDITIONAL_MEM_MIN = 0x80000,
};
struct st_sgitem {
@@ -311,6 +314,10 @@
struct st_ccb *wait_ccb;
__le32 *scratch;
+ char work_q_name[20];
+ struct workqueue_struct *work_q;
+ struct work_struct reset_work;
+ wait_queue_head_t reset_waitq;
unsigned int mu_status;
unsigned int cardtype;
int msi_enabled;
@@ -577,6 +584,9 @@
lun = cmd->device->lun;
hba = (struct st_hba *) &host->hostdata[0];
+ if (unlikely(hba->mu_status == MU_STATE_RESETTING))
+ return SCSI_MLQUEUE_HOST_BUSY;
+
switch (cmd->cmnd[0]) {
case MODE_SENSE_10:
{
@@ -841,7 +851,6 @@
void __iomem *base = hba->mmio_base;
u32 data;
unsigned long flags;
- int handled = 0;
spin_lock_irqsave(hba->host->host_lock, flags);
@@ -852,12 +861,16 @@
writel(data, base + ODBL);
readl(base + ODBL); /* flush */
stex_mu_intr(hba, data);
- handled = 1;
+ spin_unlock_irqrestore(hba->host->host_lock, flags);
+ if (unlikely(data & MU_OUTBOUND_DOORBELL_REQUEST_RESET &&
+ hba->cardtype == st_shasta))
+ queue_work(hba->work_q, &hba->reset_work);
+ return IRQ_HANDLED;
}
spin_unlock_irqrestore(hba->host->host_lock, flags);
- return IRQ_RETVAL(handled);
+ return IRQ_NONE;
}
static void stex_ss_mu_intr(struct st_hba *hba)
@@ -939,7 +952,6 @@
void __iomem *base = hba->mmio_base;
u32 data;
unsigned long flags;
- int handled = 0;
spin_lock_irqsave(hba->host->host_lock, flags);
@@ -948,12 +960,15 @@
/* clear the interrupt */
writel(data, base + YI2H_INT_C);
stex_ss_mu_intr(hba);
- handled = 1;
+ spin_unlock_irqrestore(hba->host->host_lock, flags);
+ if (unlikely(data & SS_I2H_REQUEST_RESET))
+ queue_work(hba->work_q, &hba->reset_work);
+ return IRQ_HANDLED;
}
spin_unlock_irqrestore(hba->host->host_lock, flags);
- return IRQ_RETVAL(handled);
+ return IRQ_NONE;
}
static int stex_common_handshake(struct st_hba *hba)
@@ -1001,7 +1016,7 @@
h->partner_type = HMU_PARTNER_TYPE;
if (hba->extra_offset) {
h->extra_offset = cpu_to_le32(hba->extra_offset);
- h->extra_size = cpu_to_le32(ST_ADDITIONAL_MEM);
+ h->extra_size = cpu_to_le32(hba->dma_size - hba->extra_offset);
} else
h->extra_offset = h->extra_size = 0;
@@ -1046,7 +1061,7 @@
struct st_msg_header *msg_h;
struct handshake_frame *h;
__le32 *scratch;
- u32 data;
+ u32 data, scratch_size;
unsigned long before;
int ret = 0;
@@ -1074,13 +1089,16 @@
stex_gettime(&h->hosttime);
h->partner_type = HMU_PARTNER_TYPE;
h->extra_offset = h->extra_size = 0;
- h->scratch_size = cpu_to_le32((hba->sts_count+1)*sizeof(u32));
+ scratch_size = (hba->sts_count+1)*sizeof(u32);
+ h->scratch_size = cpu_to_le32(scratch_size);
data = readl(base + YINT_EN);
data &= ~4;
writel(data, base + YINT_EN);
writel((hba->dma_handle >> 16) >> 16, base + YH2I_REQ_HI);
+ readl(base + YH2I_REQ_HI);
writel(hba->dma_handle, base + YH2I_REQ);
+ readl(base + YH2I_REQ); /* flush */
scratch = hba->scratch;
before = jiffies;
@@ -1096,7 +1114,7 @@
msleep(1);
}
- *scratch = 0;
+ memset(scratch, 0, scratch_size);
msg_h->flag = 0;
return ret;
}
@@ -1105,19 +1123,24 @@
{
int err;
unsigned long flags;
+ unsigned int mu_status;
err = (hba->cardtype == st_yel) ?
stex_ss_handshake(hba) : stex_common_handshake(hba);
+ spin_lock_irqsave(hba->host->host_lock, flags);
+ mu_status = hba->mu_status;
if (err == 0) {
- spin_lock_irqsave(hba->host->host_lock, flags);
hba->req_head = 0;
hba->req_tail = 0;
hba->status_head = 0;
hba->status_tail = 0;
hba->out_req_cnt = 0;
hba->mu_status = MU_STATE_STARTED;
- spin_unlock_irqrestore(hba->host->host_lock, flags);
- }
+ } else
+ hba->mu_status = MU_STATE_FAILED;
+ if (mu_status == MU_STATE_RESETTING)
+ wake_up_all(&hba->reset_waitq);
+ spin_unlock_irqrestore(hba->host->host_lock, flags);
return err;
}
@@ -1137,17 +1160,11 @@
base = hba->mmio_base;
spin_lock_irqsave(host->host_lock, flags);
- if (tag < host->can_queue && hba->ccb[tag].cmd == cmd)
+ if (tag < host->can_queue &&
+ hba->ccb[tag].req && hba->ccb[tag].cmd == cmd)
hba->wait_ccb = &hba->ccb[tag];
- else {
- for (tag = 0; tag < host->can_queue; tag++)
- if (hba->ccb[tag].cmd == cmd) {
- hba->wait_ccb = &hba->ccb[tag];
- break;
- }
- if (tag >= host->can_queue)
- goto out;
- }
+ else
+ goto out;
if (hba->cardtype == st_yel) {
data = readl(base + YI2H_INT);
@@ -1221,6 +1238,37 @@
hba->pdev->saved_config_space[i]);
}
+static int stex_yos_reset(struct st_hba *hba)
+{
+ void __iomem *base;
+ unsigned long flags, before;
+ int ret = 0;
+
+ base = hba->mmio_base;
+ writel(MU_INBOUND_DOORBELL_RESET, base + IDBL);
+ readl(base + IDBL); /* flush */
+ before = jiffies;
+ while (hba->out_req_cnt > 0) {
+ if (time_after(jiffies, before + ST_INTERNAL_TIMEOUT * HZ)) {
+ printk(KERN_WARNING DRV_NAME
+ "(%s): reset timeout\n", pci_name(hba->pdev));
+ ret = -1;
+ break;
+ }
+ msleep(1);
+ }
+
+ spin_lock_irqsave(hba->host->host_lock, flags);
+ if (ret == -1)
+ hba->mu_status = MU_STATE_FAILED;
+ else
+ hba->mu_status = MU_STATE_STARTED;
+ wake_up_all(&hba->reset_waitq);
+ spin_unlock_irqrestore(hba->host->host_lock, flags);
+
+ return ret;
+}
+
static void stex_ss_reset(struct st_hba *hba)
{
writel(SS_H2I_INT_RESET, hba->mmio_base + YH2I_INT);
@@ -1228,11 +1276,71 @@
ssleep(5);
}
+static int stex_do_reset(struct st_hba *hba)
+{
+ struct st_ccb *ccb;
+ unsigned long flags;
+ unsigned int mu_status = MU_STATE_RESETTING;
+ u16 tag;
+
+ spin_lock_irqsave(hba->host->host_lock, flags);
+ if (hba->mu_status == MU_STATE_STARTING) {
+ spin_unlock_irqrestore(hba->host->host_lock, flags);
+ printk(KERN_INFO DRV_NAME "(%s): request reset during init\n",
+ pci_name(hba->pdev));
+ return 0;
+ }
+ while (hba->mu_status == MU_STATE_RESETTING) {
+ spin_unlock_irqrestore(hba->host->host_lock, flags);
+ wait_event_timeout(hba->reset_waitq,
+ hba->mu_status != MU_STATE_RESETTING,
+ MU_MAX_DELAY * HZ);
+ spin_lock_irqsave(hba->host->host_lock, flags);
+ mu_status = hba->mu_status;
+ }
+
+ if (mu_status != MU_STATE_RESETTING) {
+ spin_unlock_irqrestore(hba->host->host_lock, flags);
+ return (mu_status == MU_STATE_STARTED) ? 0 : -1;
+ }
+
+ hba->mu_status = MU_STATE_RESETTING;
+ spin_unlock_irqrestore(hba->host->host_lock, flags);
+
+ if (hba->cardtype == st_yosemite)
+ return stex_yos_reset(hba);
+
+ if (hba->cardtype == st_shasta)
+ stex_hard_reset(hba);
+ else if (hba->cardtype == st_yel)
+ stex_ss_reset(hba);
+
+ spin_lock_irqsave(hba->host->host_lock, flags);
+ for (tag = 0; tag < hba->host->can_queue; tag++) {
+ ccb = &hba->ccb[tag];
+ if (ccb->req == NULL)
+ continue;
+ ccb->req = NULL;
+ if (ccb->cmd) {
+ scsi_dma_unmap(ccb->cmd);
+ ccb->cmd->result = DID_RESET << 16;
+ ccb->cmd->scsi_done(ccb->cmd);
+ ccb->cmd = NULL;
+ }
+ }
+ spin_unlock_irqrestore(hba->host->host_lock, flags);
+
+ if (stex_handshake(hba) == 0)
+ return 0;
+
+ printk(KERN_WARNING DRV_NAME "(%s): resetting: handshake failed\n",
+ pci_name(hba->pdev));
+ return -1;
+}
+
static int stex_reset(struct scsi_cmnd *cmd)
{
struct st_hba *hba;
- void __iomem *base;
- unsigned long flags, before;
hba = (struct st_hba *) &cmd->device->host->hostdata[0];
@@ -1240,54 +1348,14 @@
"(%s): resetting host\n", pci_name(hba->pdev));
scsi_print_command(cmd);
- hba->mu_status = MU_STATE_RESETTING;
+ return stex_do_reset(hba) ? FAILED : SUCCESS;
+}
- if (hba->cardtype == st_shasta)
- stex_hard_reset(hba);
- else if (hba->cardtype == st_yel)
- stex_ss_reset(hba);
+static void stex_reset_work(struct work_struct *work)
+{
+ struct st_hba *hba = container_of(work, struct st_hba, reset_work);
- if (hba->cardtype != st_yosemite) {
- if (stex_handshake(hba)) {
- printk(KERN_WARNING DRV_NAME
- "(%s): resetting: handshake failed\n",
- pci_name(hba->pdev));
- return FAILED;
- }
- return SUCCESS;
- }
-
- /* st_yosemite */
- writel(MU_INBOUND_DOORBELL_RESET, hba->mmio_base + IDBL);
- readl(hba->mmio_base + IDBL); /* flush */
- before = jiffies;
- while (hba->out_req_cnt > 0) {
- if (time_after(jiffies, before + ST_INTERNAL_TIMEOUT * HZ)) {
- printk(KERN_WARNING DRV_NAME
- "(%s): reset timeout\n", pci_name(hba->pdev));
- return FAILED;
- }
- msleep(1);
- }
-
- base = hba->mmio_base;
- writel(0, base + IMR0);
- readl(base + IMR0);
- writel(0, base + OMR0);
- readl(base + OMR0);
- writel(0, base + IMR1);
- readl(base + IMR1);
- writel(0, base + OMR1);
- readl(base + OMR1); /* flush */
- spin_lock_irqsave(hba->host->host_lock, flags);
- hba->req_head = 0;
- hba->req_tail = 0;
- hba->status_head = 0;
- hba->status_tail = 0;
- hba->out_req_cnt = 0;
- hba->mu_status = MU_STATE_STARTED;
- spin_unlock_irqrestore(hba->host->host_lock, flags);
- return SUCCESS;
+ stex_do_reset(hba);
}
static int stex_biosparam(struct scsi_device *sdev,
@@ -1420,8 +1488,8 @@
{
int ret;
- if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))
- && !pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64)))
+ if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))
+ && !pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64)))
return 0;
ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
if (!ret)
@@ -1528,10 +1596,24 @@
hba->dma_mem = dma_alloc_coherent(&pdev->dev,
hba->dma_size, &hba->dma_handle, GFP_KERNEL);
if (!hba->dma_mem) {
- err = -ENOMEM;
- printk(KERN_ERR DRV_NAME "(%s): dma mem alloc failed\n",
- pci_name(pdev));
- goto out_iounmap;
+ /* Retry minimum coherent mapping for st_seq and st_vsc */
+ if (hba->cardtype == st_seq ||
+ (hba->cardtype == st_vsc && (pdev->subsystem_device & 1))) {
+ printk(KERN_WARNING DRV_NAME
+ "(%s): allocating min buffer for controller\n",
+ pci_name(pdev));
+ hba->dma_size = hba->extra_offset
+ + ST_ADDITIONAL_MEM_MIN;
+ hba->dma_mem = dma_alloc_coherent(&pdev->dev,
+ hba->dma_size, &hba->dma_handle, GFP_KERNEL);
+ }
+
+ if (!hba->dma_mem) {
+ err = -ENOMEM;
+ printk(KERN_ERR DRV_NAME "(%s): dma mem alloc failed\n",
+ pci_name(pdev));
+ goto out_iounmap;
+ }
}
hba->ccb = kcalloc(ci->rq_count, sizeof(struct st_ccb), GFP_KERNEL);
@@ -1568,12 +1650,24 @@
hba->host = host;
hba->pdev = pdev;
+ init_waitqueue_head(&hba->reset_waitq);
+
+ snprintf(hba->work_q_name, sizeof(hba->work_q_name),
+ "stex_wq_%d", host->host_no);
+ hba->work_q = create_singlethread_workqueue(hba->work_q_name);
+ if (!hba->work_q) {
+ printk(KERN_ERR DRV_NAME "(%s): create workqueue failed\n",
+ pci_name(pdev));
+ err = -ENOMEM;
+ goto out_ccb_free;
+ }
+ INIT_WORK(&hba->reset_work, stex_reset_work);
err = stex_request_irq(hba);
if (err) {
printk(KERN_ERR DRV_NAME "(%s): request irq failed\n",
pci_name(pdev));
- goto out_ccb_free;
+ goto out_free_wq;
}
err = stex_handshake(hba);
@@ -1602,6 +1696,8 @@
out_free_irq:
stex_free_irq(hba);
+out_free_wq:
+ destroy_workqueue(hba->work_q);
out_ccb_free:
kfree(hba->ccb);
out_pci_free:
@@ -1669,6 +1765,8 @@
{
stex_free_irq(hba);
+ destroy_workqueue(hba->work_q);
+
iounmap(hba->mmio_base);
pci_release_regions(hba->pdev);
diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.c b/drivers/scsi/sym53c8xx_2/sym_glue.c
index 45374d6..2b38f6a 100644
--- a/drivers/scsi/sym53c8xx_2/sym_glue.c
+++ b/drivers/scsi/sym53c8xx_2/sym_glue.c
@@ -1864,7 +1864,7 @@
*
* This routine is similar to sym_set_workarounds(), except
* that, at this point, we already know that the device was
- * succesfully intialized at least once before, and so most
+ * successfully intialized at least once before, and so most
* of the steps taken there are un-needed here.
*/
static void sym2_reset_workarounds(struct pci_dev *pdev)
diff --git a/drivers/scsi/sym53c8xx_2/sym_hipd.c b/drivers/scsi/sym53c8xx_2/sym_hipd.c
index 297deb8..a7bc8b7 100644
--- a/drivers/scsi/sym53c8xx_2/sym_hipd.c
+++ b/drivers/scsi/sym53c8xx_2/sym_hipd.c
@@ -2692,7 +2692,7 @@
* we force a SIR_NEGO_PROTO interrupt (it is a hack that avoids
* bloat for such a should_not_happen situation).
* In all other situation, we reset the BUS.
- * Are these assumptions reasonnable ? (Wait and see ...)
+ * Are these assumptions reasonable ? (Wait and see ...)
*/
unexpected_phase:
dsp -= 8;
diff --git a/drivers/scsi/sym53c8xx_2/sym_hipd.h b/drivers/scsi/sym53c8xx_2/sym_hipd.h
index 053e63c..5a80cba 100644
--- a/drivers/scsi/sym53c8xx_2/sym_hipd.h
+++ b/drivers/scsi/sym53c8xx_2/sym_hipd.h
@@ -54,7 +54,7 @@
*
* SYM_OPT_LIMIT_COMMAND_REORDERING
* When this option is set, the driver tries to limit tagged
- * command reordering to some reasonnable value.
+ * command reordering to some reasonable value.
* (set for Linux)
*/
#if 0
diff --git a/drivers/scsi/vmw_pvscsi.c b/drivers/scsi/vmw_pvscsi.c
new file mode 100644
index 0000000..d2604c8
--- /dev/null
+++ b/drivers/scsi/vmw_pvscsi.c
@@ -0,0 +1,1407 @@
+/*
+ * Linux driver for VMware's para-virtualized SCSI HBA.
+ *
+ * Copyright (C) 2008-2009, VMware, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; version 2 of the License and no later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Maintained by: Alok N Kataria <akataria@vmware.com>
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/workqueue.h>
+#include <linux/pci.h>
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+
+#include "vmw_pvscsi.h"
+
+#define PVSCSI_LINUX_DRIVER_DESC "VMware PVSCSI driver"
+
+MODULE_DESCRIPTION(PVSCSI_LINUX_DRIVER_DESC);
+MODULE_AUTHOR("VMware, Inc.");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(PVSCSI_DRIVER_VERSION_STRING);
+
+#define PVSCSI_DEFAULT_NUM_PAGES_PER_RING 8
+#define PVSCSI_DEFAULT_NUM_PAGES_MSG_RING 1
+#define PVSCSI_DEFAULT_QUEUE_DEPTH 64
+#define SGL_SIZE PAGE_SIZE
+
+struct pvscsi_sg_list {
+ struct PVSCSISGElement sge[PVSCSI_MAX_NUM_SG_ENTRIES_PER_SEGMENT];
+};
+
+struct pvscsi_ctx {
+ /*
+ * The index of the context in cmd_map serves as the context ID for a
+ * 1-to-1 mapping completions back to requests.
+ */
+ struct scsi_cmnd *cmd;
+ struct pvscsi_sg_list *sgl;
+ struct list_head list;
+ dma_addr_t dataPA;
+ dma_addr_t sensePA;
+ dma_addr_t sglPA;
+};
+
+struct pvscsi_adapter {
+ char *mmioBase;
+ unsigned int irq;
+ u8 rev;
+ bool use_msi;
+ bool use_msix;
+ bool use_msg;
+
+ spinlock_t hw_lock;
+
+ struct workqueue_struct *workqueue;
+ struct work_struct work;
+
+ struct PVSCSIRingReqDesc *req_ring;
+ unsigned req_pages;
+ unsigned req_depth;
+ dma_addr_t reqRingPA;
+
+ struct PVSCSIRingCmpDesc *cmp_ring;
+ unsigned cmp_pages;
+ dma_addr_t cmpRingPA;
+
+ struct PVSCSIRingMsgDesc *msg_ring;
+ unsigned msg_pages;
+ dma_addr_t msgRingPA;
+
+ struct PVSCSIRingsState *rings_state;
+ dma_addr_t ringStatePA;
+
+ struct pci_dev *dev;
+ struct Scsi_Host *host;
+
+ struct list_head cmd_pool;
+ struct pvscsi_ctx *cmd_map;
+};
+
+
+/* Command line parameters */
+static int pvscsi_ring_pages = PVSCSI_DEFAULT_NUM_PAGES_PER_RING;
+static int pvscsi_msg_ring_pages = PVSCSI_DEFAULT_NUM_PAGES_MSG_RING;
+static int pvscsi_cmd_per_lun = PVSCSI_DEFAULT_QUEUE_DEPTH;
+static bool pvscsi_disable_msi;
+static bool pvscsi_disable_msix;
+static bool pvscsi_use_msg = true;
+
+#define PVSCSI_RW (S_IRUSR | S_IWUSR)
+
+module_param_named(ring_pages, pvscsi_ring_pages, int, PVSCSI_RW);
+MODULE_PARM_DESC(ring_pages, "Number of pages per req/cmp ring - (default="
+ __stringify(PVSCSI_DEFAULT_NUM_PAGES_PER_RING) ")");
+
+module_param_named(msg_ring_pages, pvscsi_msg_ring_pages, int, PVSCSI_RW);
+MODULE_PARM_DESC(msg_ring_pages, "Number of pages for the msg ring - (default="
+ __stringify(PVSCSI_DEFAULT_NUM_PAGES_MSG_RING) ")");
+
+module_param_named(cmd_per_lun, pvscsi_cmd_per_lun, int, PVSCSI_RW);
+MODULE_PARM_DESC(cmd_per_lun, "Maximum commands per lun - (default="
+ __stringify(PVSCSI_MAX_REQ_QUEUE_DEPTH) ")");
+
+module_param_named(disable_msi, pvscsi_disable_msi, bool, PVSCSI_RW);
+MODULE_PARM_DESC(disable_msi, "Disable MSI use in driver - (default=0)");
+
+module_param_named(disable_msix, pvscsi_disable_msix, bool, PVSCSI_RW);
+MODULE_PARM_DESC(disable_msix, "Disable MSI-X use in driver - (default=0)");
+
+module_param_named(use_msg, pvscsi_use_msg, bool, PVSCSI_RW);
+MODULE_PARM_DESC(use_msg, "Use msg ring when available - (default=1)");
+
+static const struct pci_device_id pvscsi_pci_tbl[] = {
+ { PCI_VDEVICE(VMWARE, PCI_DEVICE_ID_VMWARE_PVSCSI) },
+ { 0 }
+};
+
+MODULE_DEVICE_TABLE(pci, pvscsi_pci_tbl);
+
+static struct device *
+pvscsi_dev(const struct pvscsi_adapter *adapter)
+{
+ return &(adapter->dev->dev);
+}
+
+static struct pvscsi_ctx *
+pvscsi_find_context(const struct pvscsi_adapter *adapter, struct scsi_cmnd *cmd)
+{
+ struct pvscsi_ctx *ctx, *end;
+
+ end = &adapter->cmd_map[adapter->req_depth];
+ for (ctx = adapter->cmd_map; ctx < end; ctx++)
+ if (ctx->cmd == cmd)
+ return ctx;
+
+ return NULL;
+}
+
+static struct pvscsi_ctx *
+pvscsi_acquire_context(struct pvscsi_adapter *adapter, struct scsi_cmnd *cmd)
+{
+ struct pvscsi_ctx *ctx;
+
+ if (list_empty(&adapter->cmd_pool))
+ return NULL;
+
+ ctx = list_first_entry(&adapter->cmd_pool, struct pvscsi_ctx, list);
+ ctx->cmd = cmd;
+ list_del(&ctx->list);
+
+ return ctx;
+}
+
+static void pvscsi_release_context(struct pvscsi_adapter *adapter,
+ struct pvscsi_ctx *ctx)
+{
+ ctx->cmd = NULL;
+ list_add(&ctx->list, &adapter->cmd_pool);
+}
+
+/*
+ * Map a pvscsi_ctx struct to a context ID field value; we map to a simple
+ * non-zero integer. ctx always points to an entry in cmd_map array, hence
+ * the return value is always >=1.
+ */
+static u64 pvscsi_map_context(const struct pvscsi_adapter *adapter,
+ const struct pvscsi_ctx *ctx)
+{
+ return ctx - adapter->cmd_map + 1;
+}
+
+static struct pvscsi_ctx *
+pvscsi_get_context(const struct pvscsi_adapter *adapter, u64 context)
+{
+ return &adapter->cmd_map[context - 1];
+}
+
+static void pvscsi_reg_write(const struct pvscsi_adapter *adapter,
+ u32 offset, u32 val)
+{
+ writel(val, adapter->mmioBase + offset);
+}
+
+static u32 pvscsi_reg_read(const struct pvscsi_adapter *adapter, u32 offset)
+{
+ return readl(adapter->mmioBase + offset);
+}
+
+static u32 pvscsi_read_intr_status(const struct pvscsi_adapter *adapter)
+{
+ return pvscsi_reg_read(adapter, PVSCSI_REG_OFFSET_INTR_STATUS);
+}
+
+static void pvscsi_write_intr_status(const struct pvscsi_adapter *adapter,
+ u32 val)
+{
+ pvscsi_reg_write(adapter, PVSCSI_REG_OFFSET_INTR_STATUS, val);
+}
+
+static void pvscsi_unmask_intr(const struct pvscsi_adapter *adapter)
+{
+ u32 intr_bits;
+
+ intr_bits = PVSCSI_INTR_CMPL_MASK;
+ if (adapter->use_msg)
+ intr_bits |= PVSCSI_INTR_MSG_MASK;
+
+ pvscsi_reg_write(adapter, PVSCSI_REG_OFFSET_INTR_MASK, intr_bits);
+}
+
+static void pvscsi_mask_intr(const struct pvscsi_adapter *adapter)
+{
+ pvscsi_reg_write(adapter, PVSCSI_REG_OFFSET_INTR_MASK, 0);
+}
+
+static void pvscsi_write_cmd_desc(const struct pvscsi_adapter *adapter,
+ u32 cmd, const void *desc, size_t len)
+{
+ const u32 *ptr = desc;
+ size_t i;
+
+ len /= sizeof(*ptr);
+ pvscsi_reg_write(adapter, PVSCSI_REG_OFFSET_COMMAND, cmd);
+ for (i = 0; i < len; i++)
+ pvscsi_reg_write(adapter,
+ PVSCSI_REG_OFFSET_COMMAND_DATA, ptr[i]);
+}
+
+static void pvscsi_abort_cmd(const struct pvscsi_adapter *adapter,
+ const struct pvscsi_ctx *ctx)
+{
+ struct PVSCSICmdDescAbortCmd cmd = { 0 };
+
+ cmd.target = ctx->cmd->device->id;
+ cmd.context = pvscsi_map_context(adapter, ctx);
+
+ pvscsi_write_cmd_desc(adapter, PVSCSI_CMD_ABORT_CMD, &cmd, sizeof(cmd));
+}
+
+static void pvscsi_kick_rw_io(const struct pvscsi_adapter *adapter)
+{
+ pvscsi_reg_write(adapter, PVSCSI_REG_OFFSET_KICK_RW_IO, 0);
+}
+
+static void pvscsi_process_request_ring(const struct pvscsi_adapter *adapter)
+{
+ pvscsi_reg_write(adapter, PVSCSI_REG_OFFSET_KICK_NON_RW_IO, 0);
+}
+
+static int scsi_is_rw(unsigned char op)
+{
+ return op == READ_6 || op == WRITE_6 ||
+ op == READ_10 || op == WRITE_10 ||
+ op == READ_12 || op == WRITE_12 ||
+ op == READ_16 || op == WRITE_16;
+}
+
+static void pvscsi_kick_io(const struct pvscsi_adapter *adapter,
+ unsigned char op)
+{
+ if (scsi_is_rw(op))
+ pvscsi_kick_rw_io(adapter);
+ else
+ pvscsi_process_request_ring(adapter);
+}
+
+static void ll_adapter_reset(const struct pvscsi_adapter *adapter)
+{
+ dev_dbg(pvscsi_dev(adapter), "Adapter Reset on %p\n", adapter);
+
+ pvscsi_write_cmd_desc(adapter, PVSCSI_CMD_ADAPTER_RESET, NULL, 0);
+}
+
+static void ll_bus_reset(const struct pvscsi_adapter *adapter)
+{
+ dev_dbg(pvscsi_dev(adapter), "Reseting bus on %p\n", adapter);
+
+ pvscsi_write_cmd_desc(adapter, PVSCSI_CMD_RESET_BUS, NULL, 0);
+}
+
+static void ll_device_reset(const struct pvscsi_adapter *adapter, u32 target)
+{
+ struct PVSCSICmdDescResetDevice cmd = { 0 };
+
+ dev_dbg(pvscsi_dev(adapter), "Reseting device: target=%u\n", target);
+
+ cmd.target = target;
+
+ pvscsi_write_cmd_desc(adapter, PVSCSI_CMD_RESET_DEVICE,
+ &cmd, sizeof(cmd));
+}
+
+static void pvscsi_create_sg(struct pvscsi_ctx *ctx,
+ struct scatterlist *sg, unsigned count)
+{
+ unsigned i;
+ struct PVSCSISGElement *sge;
+
+ BUG_ON(count > PVSCSI_MAX_NUM_SG_ENTRIES_PER_SEGMENT);
+
+ sge = &ctx->sgl->sge[0];
+ for (i = 0; i < count; i++, sg++) {
+ sge[i].addr = sg_dma_address(sg);
+ sge[i].length = sg_dma_len(sg);
+ sge[i].flags = 0;
+ }
+}
+
+/*
+ * Map all data buffers for a command into PCI space and
+ * setup the scatter/gather list if needed.
+ */
+static void pvscsi_map_buffers(struct pvscsi_adapter *adapter,
+ struct pvscsi_ctx *ctx, struct scsi_cmnd *cmd,
+ struct PVSCSIRingReqDesc *e)
+{
+ unsigned count;
+ unsigned bufflen = scsi_bufflen(cmd);
+ struct scatterlist *sg;
+
+ e->dataLen = bufflen;
+ e->dataAddr = 0;
+ if (bufflen == 0)
+ return;
+
+ sg = scsi_sglist(cmd);
+ count = scsi_sg_count(cmd);
+ if (count != 0) {
+ int segs = scsi_dma_map(cmd);
+ if (segs > 1) {
+ pvscsi_create_sg(ctx, sg, segs);
+
+ e->flags |= PVSCSI_FLAG_CMD_WITH_SG_LIST;
+ ctx->sglPA = pci_map_single(adapter->dev, ctx->sgl,
+ SGL_SIZE, PCI_DMA_TODEVICE);
+ e->dataAddr = ctx->sglPA;
+ } else
+ e->dataAddr = sg_dma_address(sg);
+ } else {
+ /*
+ * In case there is no S/G list, scsi_sglist points
+ * directly to the buffer.
+ */
+ ctx->dataPA = pci_map_single(adapter->dev, sg, bufflen,
+ cmd->sc_data_direction);
+ e->dataAddr = ctx->dataPA;
+ }
+}
+
+static void pvscsi_unmap_buffers(const struct pvscsi_adapter *adapter,
+ struct pvscsi_ctx *ctx)
+{
+ struct scsi_cmnd *cmd;
+ unsigned bufflen;
+
+ cmd = ctx->cmd;
+ bufflen = scsi_bufflen(cmd);
+
+ if (bufflen != 0) {
+ unsigned count = scsi_sg_count(cmd);
+
+ if (count != 0) {
+ scsi_dma_unmap(cmd);
+ if (ctx->sglPA) {
+ pci_unmap_single(adapter->dev, ctx->sglPA,
+ SGL_SIZE, PCI_DMA_TODEVICE);
+ ctx->sglPA = 0;
+ }
+ } else
+ pci_unmap_single(adapter->dev, ctx->dataPA, bufflen,
+ cmd->sc_data_direction);
+ }
+ if (cmd->sense_buffer)
+ pci_unmap_single(adapter->dev, ctx->sensePA,
+ SCSI_SENSE_BUFFERSIZE, PCI_DMA_FROMDEVICE);
+}
+
+static int __devinit pvscsi_allocate_rings(struct pvscsi_adapter *adapter)
+{
+ adapter->rings_state = pci_alloc_consistent(adapter->dev, PAGE_SIZE,
+ &adapter->ringStatePA);
+ if (!adapter->rings_state)
+ return -ENOMEM;
+
+ adapter->req_pages = min(PVSCSI_MAX_NUM_PAGES_REQ_RING,
+ pvscsi_ring_pages);
+ adapter->req_depth = adapter->req_pages
+ * PVSCSI_MAX_NUM_REQ_ENTRIES_PER_PAGE;
+ adapter->req_ring = pci_alloc_consistent(adapter->dev,
+ adapter->req_pages * PAGE_SIZE,
+ &adapter->reqRingPA);
+ if (!adapter->req_ring)
+ return -ENOMEM;
+
+ adapter->cmp_pages = min(PVSCSI_MAX_NUM_PAGES_CMP_RING,
+ pvscsi_ring_pages);
+ adapter->cmp_ring = pci_alloc_consistent(adapter->dev,
+ adapter->cmp_pages * PAGE_SIZE,
+ &adapter->cmpRingPA);
+ if (!adapter->cmp_ring)
+ return -ENOMEM;
+
+ BUG_ON(!IS_ALIGNED(adapter->ringStatePA, PAGE_SIZE));
+ BUG_ON(!IS_ALIGNED(adapter->reqRingPA, PAGE_SIZE));
+ BUG_ON(!IS_ALIGNED(adapter->cmpRingPA, PAGE_SIZE));
+
+ if (!adapter->use_msg)
+ return 0;
+
+ adapter->msg_pages = min(PVSCSI_MAX_NUM_PAGES_MSG_RING,
+ pvscsi_msg_ring_pages);
+ adapter->msg_ring = pci_alloc_consistent(adapter->dev,
+ adapter->msg_pages * PAGE_SIZE,
+ &adapter->msgRingPA);
+ if (!adapter->msg_ring)
+ return -ENOMEM;
+ BUG_ON(!IS_ALIGNED(adapter->msgRingPA, PAGE_SIZE));
+
+ return 0;
+}
+
+static void pvscsi_setup_all_rings(const struct pvscsi_adapter *adapter)
+{
+ struct PVSCSICmdDescSetupRings cmd = { 0 };
+ dma_addr_t base;
+ unsigned i;
+
+ cmd.ringsStatePPN = adapter->ringStatePA >> PAGE_SHIFT;
+ cmd.reqRingNumPages = adapter->req_pages;
+ cmd.cmpRingNumPages = adapter->cmp_pages;
+
+ base = adapter->reqRingPA;
+ for (i = 0; i < adapter->req_pages; i++) {
+ cmd.reqRingPPNs[i] = base >> PAGE_SHIFT;
+ base += PAGE_SIZE;
+ }
+
+ base = adapter->cmpRingPA;
+ for (i = 0; i < adapter->cmp_pages; i++) {
+ cmd.cmpRingPPNs[i] = base >> PAGE_SHIFT;
+ base += PAGE_SIZE;
+ }
+
+ memset(adapter->rings_state, 0, PAGE_SIZE);
+ memset(adapter->req_ring, 0, adapter->req_pages * PAGE_SIZE);
+ memset(adapter->cmp_ring, 0, adapter->cmp_pages * PAGE_SIZE);
+
+ pvscsi_write_cmd_desc(adapter, PVSCSI_CMD_SETUP_RINGS,
+ &cmd, sizeof(cmd));
+
+ if (adapter->use_msg) {
+ struct PVSCSICmdDescSetupMsgRing cmd_msg = { 0 };
+
+ cmd_msg.numPages = adapter->msg_pages;
+
+ base = adapter->msgRingPA;
+ for (i = 0; i < adapter->msg_pages; i++) {
+ cmd_msg.ringPPNs[i] = base >> PAGE_SHIFT;
+ base += PAGE_SIZE;
+ }
+ memset(adapter->msg_ring, 0, adapter->msg_pages * PAGE_SIZE);
+
+ pvscsi_write_cmd_desc(adapter, PVSCSI_CMD_SETUP_MSG_RING,
+ &cmd_msg, sizeof(cmd_msg));
+ }
+}
+
+/*
+ * Pull a completion descriptor off and pass the completion back
+ * to the SCSI mid layer.
+ */
+static void pvscsi_complete_request(struct pvscsi_adapter *adapter,
+ const struct PVSCSIRingCmpDesc *e)
+{
+ struct pvscsi_ctx *ctx;
+ struct scsi_cmnd *cmd;
+ u32 btstat = e->hostStatus;
+ u32 sdstat = e->scsiStatus;
+
+ ctx = pvscsi_get_context(adapter, e->context);
+ cmd = ctx->cmd;
+ pvscsi_unmap_buffers(adapter, ctx);
+ pvscsi_release_context(adapter, ctx);
+ cmd->result = 0;
+
+ if (sdstat != SAM_STAT_GOOD &&
+ (btstat == BTSTAT_SUCCESS ||
+ btstat == BTSTAT_LINKED_COMMAND_COMPLETED ||
+ btstat == BTSTAT_LINKED_COMMAND_COMPLETED_WITH_FLAG)) {
+ cmd->result = (DID_OK << 16) | sdstat;
+ if (sdstat == SAM_STAT_CHECK_CONDITION && cmd->sense_buffer)
+ cmd->result |= (DRIVER_SENSE << 24);
+ } else
+ switch (btstat) {
+ case BTSTAT_SUCCESS:
+ case BTSTAT_LINKED_COMMAND_COMPLETED:
+ case BTSTAT_LINKED_COMMAND_COMPLETED_WITH_FLAG:
+ /* If everything went fine, let's move on.. */
+ cmd->result = (DID_OK << 16);
+ break;
+
+ case BTSTAT_DATARUN:
+ case BTSTAT_DATA_UNDERRUN:
+ /* Report residual data in underruns */
+ scsi_set_resid(cmd, scsi_bufflen(cmd) - e->dataLen);
+ cmd->result = (DID_ERROR << 16);
+ break;
+
+ case BTSTAT_SELTIMEO:
+ /* Our emulation returns this for non-connected devs */
+ cmd->result = (DID_BAD_TARGET << 16);
+ break;
+
+ case BTSTAT_LUNMISMATCH:
+ case BTSTAT_TAGREJECT:
+ case BTSTAT_BADMSG:
+ cmd->result = (DRIVER_INVALID << 24);
+ /* fall through */
+
+ case BTSTAT_HAHARDWARE:
+ case BTSTAT_INVPHASE:
+ case BTSTAT_HATIMEOUT:
+ case BTSTAT_NORESPONSE:
+ case BTSTAT_DISCONNECT:
+ case BTSTAT_HASOFTWARE:
+ case BTSTAT_BUSFREE:
+ case BTSTAT_SENSFAILED:
+ cmd->result |= (DID_ERROR << 16);
+ break;
+
+ case BTSTAT_SENTRST:
+ case BTSTAT_RECVRST:
+ case BTSTAT_BUSRESET:
+ cmd->result = (DID_RESET << 16);
+ break;
+
+ case BTSTAT_ABORTQUEUE:
+ cmd->result = (DID_ABORT << 16);
+ break;
+
+ case BTSTAT_SCSIPARITY:
+ cmd->result = (DID_PARITY << 16);
+ break;
+
+ default:
+ cmd->result = (DID_ERROR << 16);
+ scmd_printk(KERN_DEBUG, cmd,
+ "Unknown completion status: 0x%x\n",
+ btstat);
+ }
+
+ dev_dbg(&cmd->device->sdev_gendev,
+ "cmd=%p %x ctx=%p result=0x%x status=0x%x,%x\n",
+ cmd, cmd->cmnd[0], ctx, cmd->result, btstat, sdstat);
+
+ cmd->scsi_done(cmd);
+}
+
+/*
+ * barrier usage : Since the PVSCSI device is emulated, there could be cases
+ * where we may want to serialize some accesses between the driver and the
+ * emulation layer. We use compiler barriers instead of the more expensive
+ * memory barriers because PVSCSI is only supported on X86 which has strong
+ * memory access ordering.
+ */
+static void pvscsi_process_completion_ring(struct pvscsi_adapter *adapter)
+{
+ struct PVSCSIRingsState *s = adapter->rings_state;
+ struct PVSCSIRingCmpDesc *ring = adapter->cmp_ring;
+ u32 cmp_entries = s->cmpNumEntriesLog2;
+
+ while (s->cmpConsIdx != s->cmpProdIdx) {
+ struct PVSCSIRingCmpDesc *e = ring + (s->cmpConsIdx &
+ MASK(cmp_entries));
+ /*
+ * This barrier() ensures that *e is not dereferenced while
+ * the device emulation still writes data into the slot.
+ * Since the device emulation advances s->cmpProdIdx only after
+ * updating the slot we want to check it first.
+ */
+ barrier();
+ pvscsi_complete_request(adapter, e);
+ /*
+ * This barrier() ensures that compiler doesn't reorder write
+ * to s->cmpConsIdx before the read of (*e) inside
+ * pvscsi_complete_request. Otherwise, device emulation may
+ * overwrite *e before we had a chance to read it.
+ */
+ barrier();
+ s->cmpConsIdx++;
+ }
+}
+
+/*
+ * Translate a Linux SCSI request into a request ring entry.
+ */
+static int pvscsi_queue_ring(struct pvscsi_adapter *adapter,
+ struct pvscsi_ctx *ctx, struct scsi_cmnd *cmd)
+{
+ struct PVSCSIRingsState *s;
+ struct PVSCSIRingReqDesc *e;
+ struct scsi_device *sdev;
+ u32 req_entries;
+
+ s = adapter->rings_state;
+ sdev = cmd->device;
+ req_entries = s->reqNumEntriesLog2;
+
+ /*
+ * If this condition holds, we might have room on the request ring, but
+ * we might not have room on the completion ring for the response.
+ * However, we have already ruled out this possibility - we would not
+ * have successfully allocated a context if it were true, since we only
+ * have one context per request entry. Check for it anyway, since it
+ * would be a serious bug.
+ */
+ if (s->reqProdIdx - s->cmpConsIdx >= 1 << req_entries) {
+ scmd_printk(KERN_ERR, cmd, "vmw_pvscsi: "
+ "ring full: reqProdIdx=%d cmpConsIdx=%d\n",
+ s->reqProdIdx, s->cmpConsIdx);
+ return -1;
+ }
+
+ e = adapter->req_ring + (s->reqProdIdx & MASK(req_entries));
+
+ e->bus = sdev->channel;
+ e->target = sdev->id;
+ memset(e->lun, 0, sizeof(e->lun));
+ e->lun[1] = sdev->lun;
+
+ if (cmd->sense_buffer) {
+ ctx->sensePA = pci_map_single(adapter->dev, cmd->sense_buffer,
+ SCSI_SENSE_BUFFERSIZE,
+ PCI_DMA_FROMDEVICE);
+ e->senseAddr = ctx->sensePA;
+ e->senseLen = SCSI_SENSE_BUFFERSIZE;
+ } else {
+ e->senseLen = 0;
+ e->senseAddr = 0;
+ }
+ e->cdbLen = cmd->cmd_len;
+ e->vcpuHint = smp_processor_id();
+ memcpy(e->cdb, cmd->cmnd, e->cdbLen);
+
+ e->tag = SIMPLE_QUEUE_TAG;
+ if (sdev->tagged_supported &&
+ (cmd->tag == HEAD_OF_QUEUE_TAG ||
+ cmd->tag == ORDERED_QUEUE_TAG))
+ e->tag = cmd->tag;
+
+ if (cmd->sc_data_direction == DMA_FROM_DEVICE)
+ e->flags = PVSCSI_FLAG_CMD_DIR_TOHOST;
+ else if (cmd->sc_data_direction == DMA_TO_DEVICE)
+ e->flags = PVSCSI_FLAG_CMD_DIR_TODEVICE;
+ else if (cmd->sc_data_direction == DMA_NONE)
+ e->flags = PVSCSI_FLAG_CMD_DIR_NONE;
+ else
+ e->flags = 0;
+
+ pvscsi_map_buffers(adapter, ctx, cmd, e);
+
+ e->context = pvscsi_map_context(adapter, ctx);
+
+ barrier();
+
+ s->reqProdIdx++;
+
+ return 0;
+}
+
+static int pvscsi_queue(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
+{
+ struct Scsi_Host *host = cmd->device->host;
+ struct pvscsi_adapter *adapter = shost_priv(host);
+ struct pvscsi_ctx *ctx;
+ unsigned long flags;
+
+ spin_lock_irqsave(&adapter->hw_lock, flags);
+
+ ctx = pvscsi_acquire_context(adapter, cmd);
+ if (!ctx || pvscsi_queue_ring(adapter, ctx, cmd) != 0) {
+ if (ctx)
+ pvscsi_release_context(adapter, ctx);
+ spin_unlock_irqrestore(&adapter->hw_lock, flags);
+ return SCSI_MLQUEUE_HOST_BUSY;
+ }
+
+ cmd->scsi_done = done;
+
+ dev_dbg(&cmd->device->sdev_gendev,
+ "queued cmd %p, ctx %p, op=%x\n", cmd, ctx, cmd->cmnd[0]);
+
+ spin_unlock_irqrestore(&adapter->hw_lock, flags);
+
+ pvscsi_kick_io(adapter, cmd->cmnd[0]);
+
+ return 0;
+}
+
+static int pvscsi_abort(struct scsi_cmnd *cmd)
+{
+ struct pvscsi_adapter *adapter = shost_priv(cmd->device->host);
+ struct pvscsi_ctx *ctx;
+ unsigned long flags;
+
+ scmd_printk(KERN_DEBUG, cmd, "task abort on host %u, %p\n",
+ adapter->host->host_no, cmd);
+
+ spin_lock_irqsave(&adapter->hw_lock, flags);
+
+ /*
+ * Poll the completion ring first - we might be trying to abort
+ * a command that is waiting to be dispatched in the completion ring.
+ */
+ pvscsi_process_completion_ring(adapter);
+
+ /*
+ * If there is no context for the command, it either already succeeded
+ * or else was never properly issued. Not our problem.
+ */
+ ctx = pvscsi_find_context(adapter, cmd);
+ if (!ctx) {
+ scmd_printk(KERN_DEBUG, cmd, "Failed to abort cmd %p\n", cmd);
+ goto out;
+ }
+
+ pvscsi_abort_cmd(adapter, ctx);
+
+ pvscsi_process_completion_ring(adapter);
+
+out:
+ spin_unlock_irqrestore(&adapter->hw_lock, flags);
+ return SUCCESS;
+}
+
+/*
+ * Abort all outstanding requests. This is only safe to use if the completion
+ * ring will never be walked again or the device has been reset, because it
+ * destroys the 1-1 mapping between context field passed to emulation and our
+ * request structure.
+ */
+static void pvscsi_reset_all(struct pvscsi_adapter *adapter)
+{
+ unsigned i;
+
+ for (i = 0; i < adapter->req_depth; i++) {
+ struct pvscsi_ctx *ctx = &adapter->cmd_map[i];
+ struct scsi_cmnd *cmd = ctx->cmd;
+ if (cmd) {
+ scmd_printk(KERN_ERR, cmd,
+ "Forced reset on cmd %p\n", cmd);
+ pvscsi_unmap_buffers(adapter, ctx);
+ pvscsi_release_context(adapter, ctx);
+ cmd->result = (DID_RESET << 16);
+ cmd->scsi_done(cmd);
+ }
+ }
+}
+
+static int pvscsi_host_reset(struct scsi_cmnd *cmd)
+{
+ struct Scsi_Host *host = cmd->device->host;
+ struct pvscsi_adapter *adapter = shost_priv(host);
+ unsigned long flags;
+ bool use_msg;
+
+ scmd_printk(KERN_INFO, cmd, "SCSI Host reset\n");
+
+ spin_lock_irqsave(&adapter->hw_lock, flags);
+
+ use_msg = adapter->use_msg;
+
+ if (use_msg) {
+ adapter->use_msg = 0;
+ spin_unlock_irqrestore(&adapter->hw_lock, flags);
+
+ /*
+ * Now that we know that the ISR won't add more work on the
+ * workqueue we can safely flush any outstanding work.
+ */
+ flush_workqueue(adapter->workqueue);
+ spin_lock_irqsave(&adapter->hw_lock, flags);
+ }
+
+ /*
+ * We're going to tear down the entire ring structure and set it back
+ * up, so stalling new requests until all completions are flushed and
+ * the rings are back in place.
+ */
+
+ pvscsi_process_request_ring(adapter);
+
+ ll_adapter_reset(adapter);
+
+ /*
+ * Now process any completions. Note we do this AFTER adapter reset,
+ * which is strange, but stops races where completions get posted
+ * between processing the ring and issuing the reset. The backend will
+ * not touch the ring memory after reset, so the immediately pre-reset
+ * completion ring state is still valid.
+ */
+ pvscsi_process_completion_ring(adapter);
+
+ pvscsi_reset_all(adapter);
+ adapter->use_msg = use_msg;
+ pvscsi_setup_all_rings(adapter);
+ pvscsi_unmask_intr(adapter);
+
+ spin_unlock_irqrestore(&adapter->hw_lock, flags);
+
+ return SUCCESS;
+}
+
+static int pvscsi_bus_reset(struct scsi_cmnd *cmd)
+{
+ struct Scsi_Host *host = cmd->device->host;
+ struct pvscsi_adapter *adapter = shost_priv(host);
+ unsigned long flags;
+
+ scmd_printk(KERN_INFO, cmd, "SCSI Bus reset\n");
+
+ /*
+ * We don't want to queue new requests for this bus after
+ * flushing all pending requests to emulation, since new
+ * requests could then sneak in during this bus reset phase,
+ * so take the lock now.
+ */
+ spin_lock_irqsave(&adapter->hw_lock, flags);
+
+ pvscsi_process_request_ring(adapter);
+ ll_bus_reset(adapter);
+ pvscsi_process_completion_ring(adapter);
+
+ spin_unlock_irqrestore(&adapter->hw_lock, flags);
+
+ return SUCCESS;
+}
+
+static int pvscsi_device_reset(struct scsi_cmnd *cmd)
+{
+ struct Scsi_Host *host = cmd->device->host;
+ struct pvscsi_adapter *adapter = shost_priv(host);
+ unsigned long flags;
+
+ scmd_printk(KERN_INFO, cmd, "SCSI device reset on scsi%u:%u\n",
+ host->host_no, cmd->device->id);
+
+ /*
+ * We don't want to queue new requests for this device after flushing
+ * all pending requests to emulation, since new requests could then
+ * sneak in during this device reset phase, so take the lock now.
+ */
+ spin_lock_irqsave(&adapter->hw_lock, flags);
+
+ pvscsi_process_request_ring(adapter);
+ ll_device_reset(adapter, cmd->device->id);
+ pvscsi_process_completion_ring(adapter);
+
+ spin_unlock_irqrestore(&adapter->hw_lock, flags);
+
+ return SUCCESS;
+}
+
+static struct scsi_host_template pvscsi_template;
+
+static const char *pvscsi_info(struct Scsi_Host *host)
+{
+ struct pvscsi_adapter *adapter = shost_priv(host);
+ static char buf[256];
+
+ sprintf(buf, "VMware PVSCSI storage adapter rev %d, req/cmp/msg rings: "
+ "%u/%u/%u pages, cmd_per_lun=%u", adapter->rev,
+ adapter->req_pages, adapter->cmp_pages, adapter->msg_pages,
+ pvscsi_template.cmd_per_lun);
+
+ return buf;
+}
+
+static struct scsi_host_template pvscsi_template = {
+ .module = THIS_MODULE,
+ .name = "VMware PVSCSI Host Adapter",
+ .proc_name = "vmw_pvscsi",
+ .info = pvscsi_info,
+ .queuecommand = pvscsi_queue,
+ .this_id = -1,
+ .sg_tablesize = PVSCSI_MAX_NUM_SG_ENTRIES_PER_SEGMENT,
+ .dma_boundary = UINT_MAX,
+ .max_sectors = 0xffff,
+ .use_clustering = ENABLE_CLUSTERING,
+ .eh_abort_handler = pvscsi_abort,
+ .eh_device_reset_handler = pvscsi_device_reset,
+ .eh_bus_reset_handler = pvscsi_bus_reset,
+ .eh_host_reset_handler = pvscsi_host_reset,
+};
+
+static void pvscsi_process_msg(const struct pvscsi_adapter *adapter,
+ const struct PVSCSIRingMsgDesc *e)
+{
+ struct PVSCSIRingsState *s = adapter->rings_state;
+ struct Scsi_Host *host = adapter->host;
+ struct scsi_device *sdev;
+
+ printk(KERN_INFO "vmw_pvscsi: msg type: 0x%x - MSG RING: %u/%u (%u) \n",
+ e->type, s->msgProdIdx, s->msgConsIdx, s->msgNumEntriesLog2);
+
+ BUILD_BUG_ON(PVSCSI_MSG_LAST != 2);
+
+ if (e->type == PVSCSI_MSG_DEV_ADDED) {
+ struct PVSCSIMsgDescDevStatusChanged *desc;
+ desc = (struct PVSCSIMsgDescDevStatusChanged *)e;
+
+ printk(KERN_INFO
+ "vmw_pvscsi: msg: device added at scsi%u:%u:%u\n",
+ desc->bus, desc->target, desc->lun[1]);
+
+ if (!scsi_host_get(host))
+ return;
+
+ sdev = scsi_device_lookup(host, desc->bus, desc->target,
+ desc->lun[1]);
+ if (sdev) {
+ printk(KERN_INFO "vmw_pvscsi: device already exists\n");
+ scsi_device_put(sdev);
+ } else
+ scsi_add_device(adapter->host, desc->bus,
+ desc->target, desc->lun[1]);
+
+ scsi_host_put(host);
+ } else if (e->type == PVSCSI_MSG_DEV_REMOVED) {
+ struct PVSCSIMsgDescDevStatusChanged *desc;
+ desc = (struct PVSCSIMsgDescDevStatusChanged *)e;
+
+ printk(KERN_INFO
+ "vmw_pvscsi: msg: device removed at scsi%u:%u:%u\n",
+ desc->bus, desc->target, desc->lun[1]);
+
+ if (!scsi_host_get(host))
+ return;
+
+ sdev = scsi_device_lookup(host, desc->bus, desc->target,
+ desc->lun[1]);
+ if (sdev) {
+ scsi_remove_device(sdev);
+ scsi_device_put(sdev);
+ } else
+ printk(KERN_INFO
+ "vmw_pvscsi: failed to lookup scsi%u:%u:%u\n",
+ desc->bus, desc->target, desc->lun[1]);
+
+ scsi_host_put(host);
+ }
+}
+
+static int pvscsi_msg_pending(const struct pvscsi_adapter *adapter)
+{
+ struct PVSCSIRingsState *s = adapter->rings_state;
+
+ return s->msgProdIdx != s->msgConsIdx;
+}
+
+static void pvscsi_process_msg_ring(const struct pvscsi_adapter *adapter)
+{
+ struct PVSCSIRingsState *s = adapter->rings_state;
+ struct PVSCSIRingMsgDesc *ring = adapter->msg_ring;
+ u32 msg_entries = s->msgNumEntriesLog2;
+
+ while (pvscsi_msg_pending(adapter)) {
+ struct PVSCSIRingMsgDesc *e = ring + (s->msgConsIdx &
+ MASK(msg_entries));
+
+ barrier();
+ pvscsi_process_msg(adapter, e);
+ barrier();
+ s->msgConsIdx++;
+ }
+}
+
+static void pvscsi_msg_workqueue_handler(struct work_struct *data)
+{
+ struct pvscsi_adapter *adapter;
+
+ adapter = container_of(data, struct pvscsi_adapter, work);
+
+ pvscsi_process_msg_ring(adapter);
+}
+
+static int pvscsi_setup_msg_workqueue(struct pvscsi_adapter *adapter)
+{
+ char name[32];
+
+ if (!pvscsi_use_msg)
+ return 0;
+
+ pvscsi_reg_write(adapter, PVSCSI_REG_OFFSET_COMMAND,
+ PVSCSI_CMD_SETUP_MSG_RING);
+
+ if (pvscsi_reg_read(adapter, PVSCSI_REG_OFFSET_COMMAND_STATUS) == -1)
+ return 0;
+
+ snprintf(name, sizeof(name),
+ "vmw_pvscsi_wq_%u", adapter->host->host_no);
+
+ adapter->workqueue = create_singlethread_workqueue(name);
+ if (!adapter->workqueue) {
+ printk(KERN_ERR "vmw_pvscsi: failed to create work queue\n");
+ return 0;
+ }
+ INIT_WORK(&adapter->work, pvscsi_msg_workqueue_handler);
+
+ return 1;
+}
+
+static irqreturn_t pvscsi_isr(int irq, void *devp)
+{
+ struct pvscsi_adapter *adapter = devp;
+ int handled;
+
+ if (adapter->use_msi || adapter->use_msix)
+ handled = true;
+ else {
+ u32 val = pvscsi_read_intr_status(adapter);
+ handled = (val & PVSCSI_INTR_ALL_SUPPORTED) != 0;
+ if (handled)
+ pvscsi_write_intr_status(devp, val);
+ }
+
+ if (handled) {
+ unsigned long flags;
+
+ spin_lock_irqsave(&adapter->hw_lock, flags);
+
+ pvscsi_process_completion_ring(adapter);
+ if (adapter->use_msg && pvscsi_msg_pending(adapter))
+ queue_work(adapter->workqueue, &adapter->work);
+
+ spin_unlock_irqrestore(&adapter->hw_lock, flags);
+ }
+
+ return IRQ_RETVAL(handled);
+}
+
+static void pvscsi_free_sgls(const struct pvscsi_adapter *adapter)
+{
+ struct pvscsi_ctx *ctx = adapter->cmd_map;
+ unsigned i;
+
+ for (i = 0; i < adapter->req_depth; ++i, ++ctx)
+ free_pages((unsigned long)ctx->sgl, get_order(SGL_SIZE));
+}
+
+static int pvscsi_setup_msix(const struct pvscsi_adapter *adapter, int *irq)
+{
+ struct msix_entry entry = { 0, PVSCSI_VECTOR_COMPLETION };
+ int ret;
+
+ ret = pci_enable_msix(adapter->dev, &entry, 1);
+ if (ret)
+ return ret;
+
+ *irq = entry.vector;
+
+ return 0;
+}
+
+static void pvscsi_shutdown_intr(struct pvscsi_adapter *adapter)
+{
+ if (adapter->irq) {
+ free_irq(adapter->irq, adapter);
+ adapter->irq = 0;
+ }
+ if (adapter->use_msi) {
+ pci_disable_msi(adapter->dev);
+ adapter->use_msi = 0;
+ } else if (adapter->use_msix) {
+ pci_disable_msix(adapter->dev);
+ adapter->use_msix = 0;
+ }
+}
+
+static void pvscsi_release_resources(struct pvscsi_adapter *adapter)
+{
+ pvscsi_shutdown_intr(adapter);
+
+ if (adapter->workqueue)
+ destroy_workqueue(adapter->workqueue);
+
+ if (adapter->mmioBase)
+ pci_iounmap(adapter->dev, adapter->mmioBase);
+
+ pci_release_regions(adapter->dev);
+
+ if (adapter->cmd_map) {
+ pvscsi_free_sgls(adapter);
+ kfree(adapter->cmd_map);
+ }
+
+ if (adapter->rings_state)
+ pci_free_consistent(adapter->dev, PAGE_SIZE,
+ adapter->rings_state, adapter->ringStatePA);
+
+ if (adapter->req_ring)
+ pci_free_consistent(adapter->dev,
+ adapter->req_pages * PAGE_SIZE,
+ adapter->req_ring, adapter->reqRingPA);
+
+ if (adapter->cmp_ring)
+ pci_free_consistent(adapter->dev,
+ adapter->cmp_pages * PAGE_SIZE,
+ adapter->cmp_ring, adapter->cmpRingPA);
+
+ if (adapter->msg_ring)
+ pci_free_consistent(adapter->dev,
+ adapter->msg_pages * PAGE_SIZE,
+ adapter->msg_ring, adapter->msgRingPA);
+}
+
+/*
+ * Allocate scatter gather lists.
+ *
+ * These are statically allocated. Trying to be clever was not worth it.
+ *
+ * Dynamic allocation can fail, and we can't go deeep into the memory
+ * allocator, since we're a SCSI driver, and trying too hard to allocate
+ * memory might generate disk I/O. We also don't want to fail disk I/O
+ * in that case because we can't get an allocation - the I/O could be
+ * trying to swap out data to free memory. Since that is pathological,
+ * just use a statically allocated scatter list.
+ *
+ */
+static int __devinit pvscsi_allocate_sg(struct pvscsi_adapter *adapter)
+{
+ struct pvscsi_ctx *ctx;
+ int i;
+
+ ctx = adapter->cmd_map;
+ BUILD_BUG_ON(sizeof(struct pvscsi_sg_list) > SGL_SIZE);
+
+ for (i = 0; i < adapter->req_depth; ++i, ++ctx) {
+ ctx->sgl = (void *)__get_free_pages(GFP_KERNEL,
+ get_order(SGL_SIZE));
+ ctx->sglPA = 0;
+ BUG_ON(!IS_ALIGNED(((unsigned long)ctx->sgl), PAGE_SIZE));
+ if (!ctx->sgl) {
+ for (; i >= 0; --i, --ctx) {
+ free_pages((unsigned long)ctx->sgl,
+ get_order(SGL_SIZE));
+ ctx->sgl = NULL;
+ }
+ return -ENOMEM;
+ }
+ }
+
+ return 0;
+}
+
+static int __devinit pvscsi_probe(struct pci_dev *pdev,
+ const struct pci_device_id *id)
+{
+ struct pvscsi_adapter *adapter;
+ struct Scsi_Host *host;
+ unsigned int i;
+ unsigned long flags = 0;
+ int error;
+
+ error = -ENODEV;
+
+ if (pci_enable_device(pdev))
+ return error;
+
+ if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) == 0 &&
+ pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64)) == 0) {
+ printk(KERN_INFO "vmw_pvscsi: using 64bit dma\n");
+ } else if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) == 0 &&
+ pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)) == 0) {
+ printk(KERN_INFO "vmw_pvscsi: using 32bit dma\n");
+ } else {
+ printk(KERN_ERR "vmw_pvscsi: failed to set DMA mask\n");
+ goto out_disable_device;
+ }
+
+ pvscsi_template.can_queue =
+ min(PVSCSI_MAX_NUM_PAGES_REQ_RING, pvscsi_ring_pages) *
+ PVSCSI_MAX_NUM_REQ_ENTRIES_PER_PAGE;
+ pvscsi_template.cmd_per_lun =
+ min(pvscsi_template.can_queue, pvscsi_cmd_per_lun);
+ host = scsi_host_alloc(&pvscsi_template, sizeof(struct pvscsi_adapter));
+ if (!host) {
+ printk(KERN_ERR "vmw_pvscsi: failed to allocate host\n");
+ goto out_disable_device;
+ }
+
+ adapter = shost_priv(host);
+ memset(adapter, 0, sizeof(*adapter));
+ adapter->dev = pdev;
+ adapter->host = host;
+
+ spin_lock_init(&adapter->hw_lock);
+
+ host->max_channel = 0;
+ host->max_id = 16;
+ host->max_lun = 1;
+ host->max_cmd_len = 16;
+
+ adapter->rev = pdev->revision;
+
+ if (pci_request_regions(pdev, "vmw_pvscsi")) {
+ printk(KERN_ERR "vmw_pvscsi: pci memory selection failed\n");
+ goto out_free_host;
+ }
+
+ for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
+ if ((pci_resource_flags(pdev, i) & PCI_BASE_ADDRESS_SPACE_IO))
+ continue;
+
+ if (pci_resource_len(pdev, i) < PVSCSI_MEM_SPACE_SIZE)
+ continue;
+
+ break;
+ }
+
+ if (i == DEVICE_COUNT_RESOURCE) {
+ printk(KERN_ERR
+ "vmw_pvscsi: adapter has no suitable MMIO region\n");
+ goto out_release_resources;
+ }
+
+ adapter->mmioBase = pci_iomap(pdev, i, PVSCSI_MEM_SPACE_SIZE);
+
+ if (!adapter->mmioBase) {
+ printk(KERN_ERR
+ "vmw_pvscsi: can't iomap for BAR %d memsize %lu\n",
+ i, PVSCSI_MEM_SPACE_SIZE);
+ goto out_release_resources;
+ }
+
+ pci_set_master(pdev);
+ pci_set_drvdata(pdev, host);
+
+ ll_adapter_reset(adapter);
+
+ adapter->use_msg = pvscsi_setup_msg_workqueue(adapter);
+
+ error = pvscsi_allocate_rings(adapter);
+ if (error) {
+ printk(KERN_ERR "vmw_pvscsi: unable to allocate ring memory\n");
+ goto out_release_resources;
+ }
+
+ /*
+ * From this point on we should reset the adapter if anything goes
+ * wrong.
+ */
+ pvscsi_setup_all_rings(adapter);
+
+ adapter->cmd_map = kcalloc(adapter->req_depth,
+ sizeof(struct pvscsi_ctx), GFP_KERNEL);
+ if (!adapter->cmd_map) {
+ printk(KERN_ERR "vmw_pvscsi: failed to allocate memory.\n");
+ error = -ENOMEM;
+ goto out_reset_adapter;
+ }
+
+ INIT_LIST_HEAD(&adapter->cmd_pool);
+ for (i = 0; i < adapter->req_depth; i++) {
+ struct pvscsi_ctx *ctx = adapter->cmd_map + i;
+ list_add(&ctx->list, &adapter->cmd_pool);
+ }
+
+ error = pvscsi_allocate_sg(adapter);
+ if (error) {
+ printk(KERN_ERR "vmw_pvscsi: unable to allocate s/g table\n");
+ goto out_reset_adapter;
+ }
+
+ if (!pvscsi_disable_msix &&
+ pvscsi_setup_msix(adapter, &adapter->irq) == 0) {
+ printk(KERN_INFO "vmw_pvscsi: using MSI-X\n");
+ adapter->use_msix = 1;
+ } else if (!pvscsi_disable_msi && pci_enable_msi(pdev) == 0) {
+ printk(KERN_INFO "vmw_pvscsi: using MSI\n");
+ adapter->use_msi = 1;
+ adapter->irq = pdev->irq;
+ } else {
+ printk(KERN_INFO "vmw_pvscsi: using INTx\n");
+ adapter->irq = pdev->irq;
+ flags = IRQF_SHARED;
+ }
+
+ error = request_irq(adapter->irq, pvscsi_isr, flags,
+ "vmw_pvscsi", adapter);
+ if (error) {
+ printk(KERN_ERR
+ "vmw_pvscsi: unable to request IRQ: %d\n", error);
+ adapter->irq = 0;
+ goto out_reset_adapter;
+ }
+
+ error = scsi_add_host(host, &pdev->dev);
+ if (error) {
+ printk(KERN_ERR
+ "vmw_pvscsi: scsi_add_host failed: %d\n", error);
+ goto out_reset_adapter;
+ }
+
+ dev_info(&pdev->dev, "VMware PVSCSI rev %d host #%u\n",
+ adapter->rev, host->host_no);
+
+ pvscsi_unmask_intr(adapter);
+
+ scsi_scan_host(host);
+
+ return 0;
+
+out_reset_adapter:
+ ll_adapter_reset(adapter);
+out_release_resources:
+ pvscsi_release_resources(adapter);
+out_free_host:
+ scsi_host_put(host);
+out_disable_device:
+ pci_set_drvdata(pdev, NULL);
+ pci_disable_device(pdev);
+
+ return error;
+}
+
+static void __pvscsi_shutdown(struct pvscsi_adapter *adapter)
+{
+ pvscsi_mask_intr(adapter);
+
+ if (adapter->workqueue)
+ flush_workqueue(adapter->workqueue);
+
+ pvscsi_shutdown_intr(adapter);
+
+ pvscsi_process_request_ring(adapter);
+ pvscsi_process_completion_ring(adapter);
+ ll_adapter_reset(adapter);
+}
+
+static void pvscsi_shutdown(struct pci_dev *dev)
+{
+ struct Scsi_Host *host = pci_get_drvdata(dev);
+ struct pvscsi_adapter *adapter = shost_priv(host);
+
+ __pvscsi_shutdown(adapter);
+}
+
+static void pvscsi_remove(struct pci_dev *pdev)
+{
+ struct Scsi_Host *host = pci_get_drvdata(pdev);
+ struct pvscsi_adapter *adapter = shost_priv(host);
+
+ scsi_remove_host(host);
+
+ __pvscsi_shutdown(adapter);
+ pvscsi_release_resources(adapter);
+
+ scsi_host_put(host);
+
+ pci_set_drvdata(pdev, NULL);
+ pci_disable_device(pdev);
+}
+
+static struct pci_driver pvscsi_pci_driver = {
+ .name = "vmw_pvscsi",
+ .id_table = pvscsi_pci_tbl,
+ .probe = pvscsi_probe,
+ .remove = __devexit_p(pvscsi_remove),
+ .shutdown = pvscsi_shutdown,
+};
+
+static int __init pvscsi_init(void)
+{
+ pr_info("%s - version %s\n",
+ PVSCSI_LINUX_DRIVER_DESC, PVSCSI_DRIVER_VERSION_STRING);
+ return pci_register_driver(&pvscsi_pci_driver);
+}
+
+static void __exit pvscsi_exit(void)
+{
+ pci_unregister_driver(&pvscsi_pci_driver);
+}
+
+module_init(pvscsi_init);
+module_exit(pvscsi_exit);
diff --git a/drivers/scsi/vmw_pvscsi.h b/drivers/scsi/vmw_pvscsi.h
new file mode 100644
index 0000000..62e36e7
--- /dev/null
+++ b/drivers/scsi/vmw_pvscsi.h
@@ -0,0 +1,397 @@
+/*
+ * VMware PVSCSI header file
+ *
+ * Copyright (C) 2008-2009, VMware, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; version 2 of the License and no later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Maintained by: Alok N Kataria <akataria@vmware.com>
+ *
+ */
+
+#ifndef _VMW_PVSCSI_H_
+#define _VMW_PVSCSI_H_
+
+#include <linux/types.h>
+
+#define PVSCSI_DRIVER_VERSION_STRING "1.0.1.0-k"
+
+#define PVSCSI_MAX_NUM_SG_ENTRIES_PER_SEGMENT 128
+
+#define MASK(n) ((1 << (n)) - 1) /* make an n-bit mask */
+
+#define PCI_VENDOR_ID_VMWARE 0x15AD
+#define PCI_DEVICE_ID_VMWARE_PVSCSI 0x07C0
+
+/*
+ * host adapter status/error codes
+ */
+enum HostBusAdapterStatus {
+ BTSTAT_SUCCESS = 0x00, /* CCB complete normally with no errors */
+ BTSTAT_LINKED_COMMAND_COMPLETED = 0x0a,
+ BTSTAT_LINKED_COMMAND_COMPLETED_WITH_FLAG = 0x0b,
+ BTSTAT_DATA_UNDERRUN = 0x0c,
+ BTSTAT_SELTIMEO = 0x11, /* SCSI selection timeout */
+ BTSTAT_DATARUN = 0x12, /* data overrun/underrun */
+ BTSTAT_BUSFREE = 0x13, /* unexpected bus free */
+ BTSTAT_INVPHASE = 0x14, /* invalid bus phase or sequence requested by target */
+ BTSTAT_LUNMISMATCH = 0x17, /* linked CCB has different LUN from first CCB */
+ BTSTAT_SENSFAILED = 0x1b, /* auto request sense failed */
+ BTSTAT_TAGREJECT = 0x1c, /* SCSI II tagged queueing message rejected by target */
+ BTSTAT_BADMSG = 0x1d, /* unsupported message received by the host adapter */
+ BTSTAT_HAHARDWARE = 0x20, /* host adapter hardware failed */
+ BTSTAT_NORESPONSE = 0x21, /* target did not respond to SCSI ATN, sent a SCSI RST */
+ BTSTAT_SENTRST = 0x22, /* host adapter asserted a SCSI RST */
+ BTSTAT_RECVRST = 0x23, /* other SCSI devices asserted a SCSI RST */
+ BTSTAT_DISCONNECT = 0x24, /* target device reconnected improperly (w/o tag) */
+ BTSTAT_BUSRESET = 0x25, /* host adapter issued BUS device reset */
+ BTSTAT_ABORTQUEUE = 0x26, /* abort queue generated */
+ BTSTAT_HASOFTWARE = 0x27, /* host adapter software error */
+ BTSTAT_HATIMEOUT = 0x30, /* host adapter hardware timeout error */
+ BTSTAT_SCSIPARITY = 0x34, /* SCSI parity error detected */
+};
+
+/*
+ * Register offsets.
+ *
+ * These registers are accessible both via i/o space and mm i/o.
+ */
+
+enum PVSCSIRegOffset {
+ PVSCSI_REG_OFFSET_COMMAND = 0x0,
+ PVSCSI_REG_OFFSET_COMMAND_DATA = 0x4,
+ PVSCSI_REG_OFFSET_COMMAND_STATUS = 0x8,
+ PVSCSI_REG_OFFSET_LAST_STS_0 = 0x100,
+ PVSCSI_REG_OFFSET_LAST_STS_1 = 0x104,
+ PVSCSI_REG_OFFSET_LAST_STS_2 = 0x108,
+ PVSCSI_REG_OFFSET_LAST_STS_3 = 0x10c,
+ PVSCSI_REG_OFFSET_INTR_STATUS = 0x100c,
+ PVSCSI_REG_OFFSET_INTR_MASK = 0x2010,
+ PVSCSI_REG_OFFSET_KICK_NON_RW_IO = 0x3014,
+ PVSCSI_REG_OFFSET_DEBUG = 0x3018,
+ PVSCSI_REG_OFFSET_KICK_RW_IO = 0x4018,
+};
+
+/*
+ * Virtual h/w commands.
+ */
+
+enum PVSCSICommands {
+ PVSCSI_CMD_FIRST = 0, /* has to be first */
+
+ PVSCSI_CMD_ADAPTER_RESET = 1,
+ PVSCSI_CMD_ISSUE_SCSI = 2,
+ PVSCSI_CMD_SETUP_RINGS = 3,
+ PVSCSI_CMD_RESET_BUS = 4,
+ PVSCSI_CMD_RESET_DEVICE = 5,
+ PVSCSI_CMD_ABORT_CMD = 6,
+ PVSCSI_CMD_CONFIG = 7,
+ PVSCSI_CMD_SETUP_MSG_RING = 8,
+ PVSCSI_CMD_DEVICE_UNPLUG = 9,
+
+ PVSCSI_CMD_LAST = 10 /* has to be last */
+};
+
+/*
+ * Command descriptor for PVSCSI_CMD_RESET_DEVICE --
+ */
+
+struct PVSCSICmdDescResetDevice {
+ u32 target;
+ u8 lun[8];
+} __packed;
+
+/*
+ * Command descriptor for PVSCSI_CMD_ABORT_CMD --
+ *
+ * - currently does not support specifying the LUN.
+ * - _pad should be 0.
+ */
+
+struct PVSCSICmdDescAbortCmd {
+ u64 context;
+ u32 target;
+ u32 _pad;
+} __packed;
+
+/*
+ * Command descriptor for PVSCSI_CMD_SETUP_RINGS --
+ *
+ * Notes:
+ * - reqRingNumPages and cmpRingNumPages need to be power of two.
+ * - reqRingNumPages and cmpRingNumPages need to be different from 0,
+ * - reqRingNumPages and cmpRingNumPages need to be inferior to
+ * PVSCSI_SETUP_RINGS_MAX_NUM_PAGES.
+ */
+
+#define PVSCSI_SETUP_RINGS_MAX_NUM_PAGES 32
+struct PVSCSICmdDescSetupRings {
+ u32 reqRingNumPages;
+ u32 cmpRingNumPages;
+ u64 ringsStatePPN;
+ u64 reqRingPPNs[PVSCSI_SETUP_RINGS_MAX_NUM_PAGES];
+ u64 cmpRingPPNs[PVSCSI_SETUP_RINGS_MAX_NUM_PAGES];
+} __packed;
+
+/*
+ * Command descriptor for PVSCSI_CMD_SETUP_MSG_RING --
+ *
+ * Notes:
+ * - this command was not supported in the initial revision of the h/w
+ * interface. Before using it, you need to check that it is supported by
+ * writing PVSCSI_CMD_SETUP_MSG_RING to the 'command' register, then
+ * immediately after read the 'command status' register:
+ * * a value of -1 means that the cmd is NOT supported,
+ * * a value != -1 means that the cmd IS supported.
+ * If it's supported the 'command status' register should return:
+ * sizeof(PVSCSICmdDescSetupMsgRing) / sizeof(u32).
+ * - this command should be issued _after_ the usual SETUP_RINGS so that the
+ * RingsState page is already setup. If not, the command is a nop.
+ * - numPages needs to be a power of two,
+ * - numPages needs to be different from 0,
+ * - _pad should be zero.
+ */
+
+#define PVSCSI_SETUP_MSG_RING_MAX_NUM_PAGES 16
+
+struct PVSCSICmdDescSetupMsgRing {
+ u32 numPages;
+ u32 _pad;
+ u64 ringPPNs[PVSCSI_SETUP_MSG_RING_MAX_NUM_PAGES];
+} __packed;
+
+enum PVSCSIMsgType {
+ PVSCSI_MSG_DEV_ADDED = 0,
+ PVSCSI_MSG_DEV_REMOVED = 1,
+ PVSCSI_MSG_LAST = 2,
+};
+
+/*
+ * Msg descriptor.
+ *
+ * sizeof(struct PVSCSIRingMsgDesc) == 128.
+ *
+ * - type is of type enum PVSCSIMsgType.
+ * - the content of args depend on the type of event being delivered.
+ */
+
+struct PVSCSIRingMsgDesc {
+ u32 type;
+ u32 args[31];
+} __packed;
+
+struct PVSCSIMsgDescDevStatusChanged {
+ u32 type; /* PVSCSI_MSG_DEV _ADDED / _REMOVED */
+ u32 bus;
+ u32 target;
+ u8 lun[8];
+ u32 pad[27];
+} __packed;
+
+/*
+ * Rings state.
+ *
+ * - the fields:
+ * . msgProdIdx,
+ * . msgConsIdx,
+ * . msgNumEntriesLog2,
+ * .. are only used once the SETUP_MSG_RING cmd has been issued.
+ * - '_pad' helps to ensure that the msg related fields are on their own
+ * cache-line.
+ */
+
+struct PVSCSIRingsState {
+ u32 reqProdIdx;
+ u32 reqConsIdx;
+ u32 reqNumEntriesLog2;
+
+ u32 cmpProdIdx;
+ u32 cmpConsIdx;
+ u32 cmpNumEntriesLog2;
+
+ u8 _pad[104];
+
+ u32 msgProdIdx;
+ u32 msgConsIdx;
+ u32 msgNumEntriesLog2;
+} __packed;
+
+/*
+ * Request descriptor.
+ *
+ * sizeof(RingReqDesc) = 128
+ *
+ * - context: is a unique identifier of a command. It could normally be any
+ * 64bit value, however we currently store it in the serialNumber variable
+ * of struct SCSI_Command, so we have the following restrictions due to the
+ * way this field is handled in the vmkernel storage stack:
+ * * this value can't be 0,
+ * * the upper 32bit need to be 0 since serialNumber is as a u32.
+ * Currently tracked as PR 292060.
+ * - dataLen: contains the total number of bytes that need to be transferred.
+ * - dataAddr:
+ * * if PVSCSI_FLAG_CMD_WITH_SG_LIST is set: dataAddr is the PA of the first
+ * s/g table segment, each s/g segment is entirely contained on a single
+ * page of physical memory,
+ * * if PVSCSI_FLAG_CMD_WITH_SG_LIST is NOT set, then dataAddr is the PA of
+ * the buffer used for the DMA transfer,
+ * - flags:
+ * * PVSCSI_FLAG_CMD_WITH_SG_LIST: see dataAddr above,
+ * * PVSCSI_FLAG_CMD_DIR_NONE: no DMA involved,
+ * * PVSCSI_FLAG_CMD_DIR_TOHOST: transfer from device to main memory,
+ * * PVSCSI_FLAG_CMD_DIR_TODEVICE: transfer from main memory to device,
+ * * PVSCSI_FLAG_CMD_OUT_OF_BAND_CDB: reserved to handle CDBs larger than
+ * 16bytes. To be specified.
+ * - vcpuHint: vcpuId of the processor that will be most likely waiting for the
+ * completion of the i/o. For guest OSes that use lowest priority message
+ * delivery mode (such as windows), we use this "hint" to deliver the
+ * completion action to the proper vcpu. For now, we can use the vcpuId of
+ * the processor that initiated the i/o as a likely candidate for the vcpu
+ * that will be waiting for the completion..
+ * - bus should be 0: we currently only support bus 0 for now.
+ * - unused should be zero'd.
+ */
+
+#define PVSCSI_FLAG_CMD_WITH_SG_LIST (1 << 0)
+#define PVSCSI_FLAG_CMD_OUT_OF_BAND_CDB (1 << 1)
+#define PVSCSI_FLAG_CMD_DIR_NONE (1 << 2)
+#define PVSCSI_FLAG_CMD_DIR_TOHOST (1 << 3)
+#define PVSCSI_FLAG_CMD_DIR_TODEVICE (1 << 4)
+
+struct PVSCSIRingReqDesc {
+ u64 context;
+ u64 dataAddr;
+ u64 dataLen;
+ u64 senseAddr;
+ u32 senseLen;
+ u32 flags;
+ u8 cdb[16];
+ u8 cdbLen;
+ u8 lun[8];
+ u8 tag;
+ u8 bus;
+ u8 target;
+ u8 vcpuHint;
+ u8 unused[59];
+} __packed;
+
+/*
+ * Scatter-gather list management.
+ *
+ * As described above, when PVSCSI_FLAG_CMD_WITH_SG_LIST is set in the
+ * RingReqDesc.flags, then RingReqDesc.dataAddr is the PA of the first s/g
+ * table segment.
+ *
+ * - each segment of the s/g table contain a succession of struct
+ * PVSCSISGElement.
+ * - each segment is entirely contained on a single physical page of memory.
+ * - a "chain" s/g element has the flag PVSCSI_SGE_FLAG_CHAIN_ELEMENT set in
+ * PVSCSISGElement.flags and in this case:
+ * * addr is the PA of the next s/g segment,
+ * * length is undefined, assumed to be 0.
+ */
+
+struct PVSCSISGElement {
+ u64 addr;
+ u32 length;
+ u32 flags;
+} __packed;
+
+/*
+ * Completion descriptor.
+ *
+ * sizeof(RingCmpDesc) = 32
+ *
+ * - context: identifier of the command. The same thing that was specified
+ * under "context" as part of struct RingReqDesc at initiation time,
+ * - dataLen: number of bytes transferred for the actual i/o operation,
+ * - senseLen: number of bytes written into the sense buffer,
+ * - hostStatus: adapter status,
+ * - scsiStatus: device status,
+ * - _pad should be zero.
+ */
+
+struct PVSCSIRingCmpDesc {
+ u64 context;
+ u64 dataLen;
+ u32 senseLen;
+ u16 hostStatus;
+ u16 scsiStatus;
+ u32 _pad[2];
+} __packed;
+
+/*
+ * Interrupt status / IRQ bits.
+ */
+
+#define PVSCSI_INTR_CMPL_0 (1 << 0)
+#define PVSCSI_INTR_CMPL_1 (1 << 1)
+#define PVSCSI_INTR_CMPL_MASK MASK(2)
+
+#define PVSCSI_INTR_MSG_0 (1 << 2)
+#define PVSCSI_INTR_MSG_1 (1 << 3)
+#define PVSCSI_INTR_MSG_MASK (MASK(2) << 2)
+
+#define PVSCSI_INTR_ALL_SUPPORTED MASK(4)
+
+/*
+ * Number of MSI-X vectors supported.
+ */
+#define PVSCSI_MAX_INTRS 24
+
+/*
+ * Enumeration of supported MSI-X vectors
+ */
+#define PVSCSI_VECTOR_COMPLETION 0
+
+/*
+ * Misc constants for the rings.
+ */
+
+#define PVSCSI_MAX_NUM_PAGES_REQ_RING PVSCSI_SETUP_RINGS_MAX_NUM_PAGES
+#define PVSCSI_MAX_NUM_PAGES_CMP_RING PVSCSI_SETUP_RINGS_MAX_NUM_PAGES
+#define PVSCSI_MAX_NUM_PAGES_MSG_RING PVSCSI_SETUP_MSG_RING_MAX_NUM_PAGES
+
+#define PVSCSI_MAX_NUM_REQ_ENTRIES_PER_PAGE \
+ (PAGE_SIZE / sizeof(struct PVSCSIRingReqDesc))
+
+#define PVSCSI_MAX_REQ_QUEUE_DEPTH \
+ (PVSCSI_MAX_NUM_PAGES_REQ_RING * PVSCSI_MAX_NUM_REQ_ENTRIES_PER_PAGE)
+
+#define PVSCSI_MEM_SPACE_COMMAND_NUM_PAGES 1
+#define PVSCSI_MEM_SPACE_INTR_STATUS_NUM_PAGES 1
+#define PVSCSI_MEM_SPACE_MISC_NUM_PAGES 2
+#define PVSCSI_MEM_SPACE_KICK_IO_NUM_PAGES 2
+#define PVSCSI_MEM_SPACE_MSIX_NUM_PAGES 2
+
+enum PVSCSIMemSpace {
+ PVSCSI_MEM_SPACE_COMMAND_PAGE = 0,
+ PVSCSI_MEM_SPACE_INTR_STATUS_PAGE = 1,
+ PVSCSI_MEM_SPACE_MISC_PAGE = 2,
+ PVSCSI_MEM_SPACE_KICK_IO_PAGE = 4,
+ PVSCSI_MEM_SPACE_MSIX_TABLE_PAGE = 6,
+ PVSCSI_MEM_SPACE_MSIX_PBA_PAGE = 7,
+};
+
+#define PVSCSI_MEM_SPACE_NUM_PAGES \
+ (PVSCSI_MEM_SPACE_COMMAND_NUM_PAGES + \
+ PVSCSI_MEM_SPACE_INTR_STATUS_NUM_PAGES + \
+ PVSCSI_MEM_SPACE_MISC_NUM_PAGES + \
+ PVSCSI_MEM_SPACE_KICK_IO_NUM_PAGES + \
+ PVSCSI_MEM_SPACE_MSIX_NUM_PAGES)
+
+#define PVSCSI_MEM_SPACE_SIZE (PVSCSI_MEM_SPACE_NUM_PAGES * PAGE_SIZE)
+
+#endif /* _VMW_PVSCSI_H_ */
diff --git a/drivers/scsi/wd7000.c b/drivers/scsi/wd7000.c
index 093610b..2f6e9d8 100644
--- a/drivers/scsi/wd7000.c
+++ b/drivers/scsi/wd7000.c
@@ -161,7 +161,7 @@
*
* 2003/02/12 - Christoph Hellwig <hch@infradead.org>
*
- * Cleaned up host template defintion
+ * Cleaned up host template definition
* Removed now obsolete wd7000.h
*/
diff --git a/drivers/serial/8250_pnp.c b/drivers/serial/8250_pnp.c
index d71dfe3..36ede02 100644
--- a/drivers/serial/8250_pnp.c
+++ b/drivers/serial/8250_pnp.c
@@ -361,9 +361,9 @@
{ "LTS0001", 0 },
/* Rockwell's (PORALiNK) 33600 INT PNP */
{ "WCI0003", 0 },
- /* Unkown PnP modems */
+ /* Unknown PnP modems */
{ "PNPCXXX", UNKNOWN_DEV },
- /* More unkown PnP modems */
+ /* More unknown PnP modems */
{ "PNPDXXX", UNKNOWN_DEV },
{ "", 0 }
};
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 50943ff..9ff47db0 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -996,7 +996,7 @@
config SERIAL_SH_SCI
tristate "SuperH SCI(F) serial port support"
- depends on SUPERH || H8300
+ depends on HAVE_CLK && (SUPERH || H8300)
select SERIAL_CORE
config SERIAL_SH_SCI_NR_UARTS
diff --git a/drivers/serial/mcf.c b/drivers/serial/mcf.c
index b443824..7bb5fee 100644
--- a/drivers/serial/mcf.c
+++ b/drivers/serial/mcf.c
@@ -602,7 +602,7 @@
/****************************************************************************/
-static int mcf_remove(struct platform_device *pdev)
+static int __devexit mcf_remove(struct platform_device *pdev)
{
struct uart_port *port;
int i;
diff --git a/drivers/serial/pmac_zilog.h b/drivers/serial/pmac_zilog.h
index 570b0d9..f6e77f1 100644
--- a/drivers/serial/pmac_zilog.h
+++ b/drivers/serial/pmac_zilog.h
@@ -73,7 +73,7 @@
}
/*
- * Register acessors. Note that we don't need to enforce a recovery
+ * Register accessors. Note that we don't need to enforce a recovery
* delay on PCI PowerMac hardware, it's dealt in HW by the MacIO chip,
* though if we try to use this driver on older machines, we might have
* to add it back
diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index 6498bd1..ff38dbd 100644
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -50,7 +50,6 @@
#include <linux/list.h>
#ifdef CONFIG_SUPERH
-#include <asm/clock.h>
#include <asm/sh_bios.h>
#endif
@@ -79,22 +78,18 @@
struct timer_list break_timer;
int break_flag;
-#ifdef CONFIG_HAVE_CLK
/* Interface clock */
struct clk *iclk;
/* Data clock */
struct clk *dclk;
-#endif
+
struct list_head node;
};
struct sh_sci_priv {
spinlock_t lock;
struct list_head ports;
-
-#ifdef CONFIG_HAVE_CLK
struct notifier_block clk_nb;
-#endif
};
/* Function prototypes */
@@ -156,32 +151,6 @@
}
#endif /* CONFIG_CONSOLE_POLL || CONFIG_SERIAL_SH_SCI_CONSOLE */
-#if defined(__H8300S__)
-enum { sci_disable, sci_enable };
-
-static void h8300_sci_config(struct uart_port *port, unsigned int ctrl)
-{
- volatile unsigned char *mstpcrl = (volatile unsigned char *)MSTPCRL;
- int ch = (port->mapbase - SMR0) >> 3;
- unsigned char mask = 1 << (ch+1);
-
- if (ctrl == sci_disable)
- *mstpcrl |= mask;
- else
- *mstpcrl &= ~mask;
-}
-
-static void h8300_sci_enable(struct uart_port *port)
-{
- h8300_sci_config(port, sci_enable);
-}
-
-static void h8300_sci_disable(struct uart_port *port)
-{
- h8300_sci_config(port, sci_disable);
-}
-#endif
-
#if defined(__H8300H__) || defined(__H8300S__)
static void sci_init_pins(struct uart_port *port, unsigned int cflag)
{
@@ -733,7 +702,6 @@
return ret;
}
-#ifdef CONFIG_HAVE_CLK
/*
* Here we define a transistion notifier so that we can update all of our
* ports' baud rate when the peripheral clock changes.
@@ -751,7 +719,6 @@
spin_lock_irqsave(&priv->lock, flags);
list_for_each_entry(sci_port, &priv->ports, node)
sci_port->port.uartclk = clk_get_rate(sci_port->dclk);
-
spin_unlock_irqrestore(&priv->lock, flags);
}
@@ -778,7 +745,6 @@
clk_disable(sci_port->dclk);
}
-#endif
static int sci_request_irq(struct sci_port *port)
{
@@ -833,8 +799,8 @@
static unsigned int sci_tx_empty(struct uart_port *port)
{
- /* Can't detect */
- return TIOCSER_TEMT;
+ unsigned short status = sci_in(port, SCxSR);
+ return status & SCxSR_TEND(port) ? TIOCSER_TEMT : 0;
}
static void sci_set_mctrl(struct uart_port *port, unsigned int mctrl)
@@ -1077,21 +1043,10 @@
sci_port->port.iotype = UPIO_MEM;
sci_port->port.line = index;
sci_port->port.fifosize = 1;
-
-#if defined(__H8300H__) || defined(__H8300S__)
-#ifdef __H8300S__
- sci_port->enable = h8300_sci_enable;
- sci_port->disable = h8300_sci_disable;
-#endif
- sci_port->port.uartclk = CONFIG_CPU_CLOCK;
-#elif defined(CONFIG_HAVE_CLK)
sci_port->iclk = p->clk ? clk_get(&dev->dev, p->clk) : NULL;
sci_port->dclk = clk_get(&dev->dev, "peripheral_clk");
sci_port->enable = sci_clk_enable;
sci_port->disable = sci_clk_disable;
-#else
-#error "Need a valid uartclk"
-#endif
sci_port->break_timer.data = (unsigned long)sci_port;
sci_port->break_timer.function = sci_break_timer;
@@ -1106,7 +1061,6 @@
sci_port->type = sci_port->port.type = p->type;
memcpy(&sci_port->irqs, &p->irqs, sizeof(p->irqs));
-
}
#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE
@@ -1239,14 +1193,11 @@
struct sci_port *p;
unsigned long flags;
-#ifdef CONFIG_HAVE_CLK
cpufreq_unregister_notifier(&priv->clk_nb, CPUFREQ_TRANSITION_NOTIFIER);
-#endif
spin_lock_irqsave(&priv->lock, flags);
list_for_each_entry(p, &priv->ports, node)
uart_remove_one_port(&sci_uart_driver, &p->port);
-
spin_unlock_irqrestore(&priv->lock, flags);
kfree(priv);
@@ -1307,10 +1258,8 @@
spin_lock_init(&priv->lock);
platform_set_drvdata(dev, priv);
-#ifdef CONFIG_HAVE_CLK
priv->clk_nb.notifier_call = sci_notifier;
cpufreq_register_notifier(&priv->clk_nb, CPUFREQ_TRANSITION_NOTIFIER);
-#endif
if (dev->id != -1) {
ret = sci_probe_single(dev, dev->id, p, &sci_ports[dev->id]);
@@ -1370,7 +1319,7 @@
static struct platform_driver sci_driver = {
.probe = sci_probe,
- .remove = __devexit_p(sci_remove),
+ .remove = sci_remove,
.driver = {
.name = "sh-sci",
.owner = THIS_MODULE,
diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h
index 3e2fcf9..a32094ee 100644
--- a/drivers/serial/sh-sci.h
+++ b/drivers/serial/sh-sci.h
@@ -1,5 +1,5 @@
#include <linux/serial_core.h>
-#include <asm/io.h>
+#include <linux/io.h>
#include <linux/gpio.h>
#if defined(CONFIG_H83007) || defined(CONFIG_H83068)
diff --git a/drivers/serial/ucc_uart.c b/drivers/serial/ucc_uart.c
index 0c08f28..46de564 100644
--- a/drivers/serial/ucc_uart.c
+++ b/drivers/serial/ucc_uart.c
@@ -313,7 +313,7 @@
* This function will attempt to stuff of all the characters from the
* kernel's transmit buffer into TX BDs.
*
- * A return value of non-zero indicates that it sucessfully stuffed all
+ * A return value of non-zero indicates that it successfully stuffed all
* characters from the kernel buffer.
*
* A return value of zero indicates that there are still characters in the
diff --git a/drivers/sh/Makefile b/drivers/sh/Makefile
index 6a025ce..4956bf1 100644
--- a/drivers/sh/Makefile
+++ b/drivers/sh/Makefile
@@ -3,4 +3,5 @@
#
obj-$(CONFIG_SUPERHYWAY) += superhyway/
obj-$(CONFIG_MAPLE) += maple/
+obj-$(CONFIG_GENERIC_GPIO) += pfc.o
obj-y += intc.o
diff --git a/drivers/sh/intc.c b/drivers/sh/intc.c
index 559b5fe..a7e5c2e 100644
--- a/drivers/sh/intc.c
+++ b/drivers/sh/intc.c
@@ -2,6 +2,7 @@
* Shared interrupt handling code for IPR and INTC2 types of IRQs.
*
* Copyright (C) 2007, 2008 Magnus Damm
+ * Copyright (C) 2009 Paul Mundt
*
* Based on intc2.c and ipr.c
*
@@ -24,6 +25,7 @@
#include <linux/sysdev.h>
#include <linux/list.h>
#include <linux/topology.h>
+#include <linux/bitmap.h>
#define _INTC_MK(fn, mode, addr_e, addr_d, width, shift) \
((shift) | ((width) << 5) | ((fn) << 9) | ((mode) << 13) | \
@@ -59,6 +61,20 @@
static LIST_HEAD(intc_list);
+/*
+ * The intc_irq_map provides a global map of bound IRQ vectors for a
+ * given platform. Allocation of IRQs are either static through the CPU
+ * vector map, or dynamic in the case of board mux vectors or MSI.
+ *
+ * As this is a central point for all IRQ controllers on the system,
+ * each of the available sources are mapped out here. This combined with
+ * sparseirq makes it quite trivial to keep the vector map tightly packed
+ * when dynamically creating IRQs, as well as tying in to otherwise
+ * unused irq_desc positions in the sparse array.
+ */
+static DECLARE_BITMAP(intc_irq_map, NR_IRQS);
+static DEFINE_SPINLOCK(vector_lock);
+
#ifdef CONFIG_SMP
#define IS_SMP(x) x.smp
#define INTC_REG(d, x, c) (d->reg[(x)] + ((d->smp[(x)] & 0xff) * c))
@@ -70,9 +86,7 @@
#endif
static unsigned int intc_prio_level[NR_IRQS]; /* for now */
-#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A)
static unsigned long ack_handle[NR_IRQS];
-#endif
static inline struct intc_desc_int *get_intc_desc(unsigned int irq)
{
@@ -250,7 +264,6 @@
return 0; /* allow wakeup, but setup hardware in intc_suspend() */
}
-#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A)
static void intc_mask_ack(unsigned int irq)
{
struct intc_desc_int *d = get_intc_desc(irq);
@@ -282,7 +295,6 @@
}
}
}
-#endif
static struct intc_handle_int *intc_find_irq(struct intc_handle_int *hp,
unsigned int nr_hp,
@@ -501,7 +513,6 @@
return 0;
}
-#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A)
static unsigned int __init intc_ack_data(struct intc_desc *desc,
struct intc_desc_int *d,
intc_enum enum_id)
@@ -533,7 +544,6 @@
return 0;
}
-#endif
static unsigned int __init intc_sense_data(struct intc_desc *desc,
struct intc_desc_int *d,
@@ -572,6 +582,11 @@
struct intc_handle_int *hp;
unsigned int data[2], primary;
+ /*
+ * Register the IRQ position with the global IRQ map
+ */
+ set_bit(irq, intc_irq_map);
+
/* Prefer single interrupt source bitmap over other combinations:
* 1. bitmap, single interrupt source
* 2. priority, single interrupt source
@@ -641,10 +656,8 @@
/* irq should be disabled by default */
d->chip.mask(irq);
-#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A)
if (desc->ack_regs)
ack_handle[irq] = intc_ack_data(desc, d, enum_id);
-#endif
}
static unsigned int __init save_reg(struct intc_desc_int *d,
@@ -681,10 +694,8 @@
d->nr_reg = desc->mask_regs ? desc->nr_mask_regs * 2 : 0;
d->nr_reg += desc->prio_regs ? desc->nr_prio_regs * 2 : 0;
d->nr_reg += desc->sense_regs ? desc->nr_sense_regs : 0;
-
-#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A)
d->nr_reg += desc->ack_regs ? desc->nr_ack_regs : 0;
-#endif
+
d->reg = kzalloc(d->nr_reg * sizeof(*d->reg), GFP_NOWAIT);
#ifdef CONFIG_SMP
d->smp = kzalloc(d->nr_reg * sizeof(*d->smp), GFP_NOWAIT);
@@ -727,14 +738,12 @@
d->chip.set_type = intc_set_sense;
d->chip.set_wake = intc_set_wake;
-#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A)
if (desc->ack_regs) {
for (i = 0; i < desc->nr_ack_regs; i++)
k += save_reg(d, k, desc->ack_regs[i].set_reg, 0);
d->chip.mask_ack = intc_mask_ack;
}
-#endif
BUG_ON(k > 256); /* _INTC_ADDR_E() and _INTC_ADDR_D() are 8 bits */
@@ -856,5 +865,91 @@
return error;
}
-
device_initcall(register_intc_sysdevs);
+
+/*
+ * Dynamic IRQ allocation and deallocation
+ */
+static unsigned int create_irq_on_node(unsigned int irq_want, int node)
+{
+ unsigned int irq = 0, new;
+ unsigned long flags;
+ struct irq_desc *desc;
+
+ spin_lock_irqsave(&vector_lock, flags);
+
+ /*
+ * First try the wanted IRQ, then scan.
+ */
+ if (test_and_set_bit(irq_want, intc_irq_map)) {
+ new = find_first_zero_bit(intc_irq_map, nr_irqs);
+ if (unlikely(new == nr_irqs))
+ goto out_unlock;
+
+ desc = irq_to_desc_alloc_node(new, node);
+ if (unlikely(!desc)) {
+ pr_info("can't get irq_desc for %d\n", new);
+ goto out_unlock;
+ }
+
+ desc = move_irq_desc(desc, node);
+ __set_bit(new, intc_irq_map);
+ irq = new;
+ }
+
+out_unlock:
+ spin_unlock_irqrestore(&vector_lock, flags);
+
+ if (irq > 0)
+ dynamic_irq_init(irq);
+
+ return irq;
+}
+
+int create_irq(void)
+{
+ int nid = cpu_to_node(smp_processor_id());
+ int irq;
+
+ irq = create_irq_on_node(NR_IRQS_LEGACY, nid);
+ if (irq == 0)
+ irq = -1;
+
+ return irq;
+}
+
+void destroy_irq(unsigned int irq)
+{
+ unsigned long flags;
+
+ dynamic_irq_cleanup(irq);
+
+ spin_lock_irqsave(&vector_lock, flags);
+ __clear_bit(irq, intc_irq_map);
+ spin_unlock_irqrestore(&vector_lock, flags);
+}
+
+int reserve_irq_vector(unsigned int irq)
+{
+ unsigned long flags;
+ int ret = 0;
+
+ spin_lock_irqsave(&vector_lock, flags);
+ if (test_and_set_bit(irq, intc_irq_map))
+ ret = -EBUSY;
+ spin_unlock_irqrestore(&vector_lock, flags);
+
+ return ret;
+}
+
+void reserve_irq_legacy(void)
+{
+ unsigned long flags;
+ int i, j;
+
+ spin_lock_irqsave(&vector_lock, flags);
+ j = find_first_bit(intc_irq_map, nr_irqs);
+ for (i = 0; i < j; i++)
+ __set_bit(i, intc_irq_map);
+ spin_unlock_irqrestore(&vector_lock, flags);
+}
diff --git a/drivers/sh/maple/maple.c b/drivers/sh/maple/maple.c
index 93c20e1..4e8f57d 100644
--- a/drivers/sh/maple/maple.c
+++ b/drivers/sh/maple/maple.c
@@ -106,7 +106,7 @@
* max delay is 11
*/
ctrl_outl(MAPLE_2MBPS | MAPLE_TIMEOUT(0xFFFF), MAPLE_SPEED);
- ctrl_outl(PHYSADDR(maple_sendbuf), MAPLE_DMAADDR);
+ ctrl_outl(virt_to_phys(maple_sendbuf), MAPLE_DMAADDR);
ctrl_outl(1, MAPLE_ENABLE);
}
@@ -258,7 +258,7 @@
maple_lastptr = maple_sendptr;
*maple_sendptr++ = (port << 16) | len | 0x80000000;
- *maple_sendptr++ = PHYSADDR(mq->recvbuf->buf);
+ *maple_sendptr++ = virt_to_phys(mq->recvbuf->buf);
*maple_sendptr++ =
mq->command | (to << 8) | (from << 16) | (len << 24);
while (len-- > 0)
diff --git a/arch/sh/kernel/gpio.c b/drivers/sh/pfc.c
similarity index 93%
rename from arch/sh/kernel/gpio.c
rename to drivers/sh/pfc.c
index d22e5af..841ed50 100644
--- a/arch/sh/kernel/gpio.c
+++ b/drivers/sh/pfc.c
@@ -7,7 +7,6 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
-
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/list.h>
@@ -35,11 +34,11 @@
{
switch (reg_width) {
case 8:
- return ctrl_inb(reg);
+ return __raw_readb(reg);
case 16:
- return ctrl_inw(reg);
+ return __raw_readw(reg);
case 32:
- return ctrl_inl(reg);
+ return __raw_readl(reg);
}
BUG();
@@ -52,13 +51,13 @@
{
switch (reg_width) {
case 8:
- ctrl_outb(data, reg);
+ __raw_writeb(data, reg);
return;
case 16:
- ctrl_outw(data, reg);
+ __raw_writew(data, reg);
return;
case 32:
- ctrl_outl(data, reg);
+ __raw_writel(data, reg);
return;
}
@@ -72,11 +71,9 @@
pos = dr->reg_width - (in_pos + 1);
-#ifdef DEBUG
- pr_info("write_bit addr = %lx, value = %ld, pos = %ld, "
- "r_width = %ld\n",
- dr->reg, !!value, pos, dr->reg_width);
-#endif
+ pr_debug("write_bit addr = %lx, value = %ld, pos = %ld, "
+ "r_width = %ld\n",
+ dr->reg, !!value, pos, dr->reg_width);
if (value)
set_bit(pos, &dr->reg_shadow);
@@ -95,11 +92,9 @@
mask = (1 << field_width) - 1;
pos = reg_width - ((in_pos + 1) * field_width);
-#ifdef DEBUG
- pr_info("read_reg: addr = %lx, pos = %ld, "
- "r_width = %ld, f_width = %ld\n",
- reg, pos, reg_width, field_width);
-#endif
+ pr_debug("read_reg: addr = %lx, pos = %ld, "
+ "r_width = %ld, f_width = %ld\n",
+ reg, pos, reg_width, field_width);
data = gpio_read_raw_reg(reg, reg_width);
return (data >> pos) & mask;
@@ -114,24 +109,22 @@
mask = (1 << field_width) - 1;
pos = reg_width - ((in_pos + 1) * field_width);
-#ifdef DEBUG
- pr_info("write_reg addr = %lx, value = %ld, pos = %ld, "
- "r_width = %ld, f_width = %ld\n",
- reg, value, pos, reg_width, field_width);
-#endif
+ pr_debug("write_reg addr = %lx, value = %ld, pos = %ld, "
+ "r_width = %ld, f_width = %ld\n",
+ reg, value, pos, reg_width, field_width);
mask = ~(mask << pos);
value = value << pos;
switch (reg_width) {
case 8:
- ctrl_outb((ctrl_inb(reg) & mask) | value, reg);
+ __raw_writeb((__raw_readb(reg) & mask) | value, reg);
break;
case 16:
- ctrl_outw((ctrl_inw(reg) & mask) | value, reg);
+ __raw_writew((__raw_readw(reg) & mask) | value, reg);
break;
case 32:
- ctrl_outl((ctrl_inl(reg) & mask) | value, reg);
+ __raw_writel((__raw_readl(reg) & mask) | value, reg);
break;
}
}
diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c
index 5d23983..20d7322 100644
--- a/drivers/spi/spidev.c
+++ b/drivers/spi/spidev.c
@@ -30,7 +30,6 @@
#include <linux/errno.h>
#include <linux/mutex.h>
#include <linux/slab.h>
-#include <linux/smp_lock.h>
#include <linux/spi/spi.h>
#include <linux/spi/spidev.h>
@@ -42,7 +41,7 @@
* This supports acccess to SPI devices using normal userspace I/O calls.
* Note that while traditional UNIX/POSIX I/O semantics are half duplex,
* and often mask message boundaries, full SPI support requires full duplex
- * transfers. There are several kinds of of internal message boundaries to
+ * transfers. There are several kinds of internal message boundaries to
* handle chipselect management and other protocol options.
*
* SPI has a character major number assigned. We allocate minor numbers
@@ -477,7 +476,6 @@
struct spidev_data *spidev;
int status = -ENXIO;
- lock_kernel();
mutex_lock(&device_list_lock);
list_for_each_entry(spidev, &device_list, device_entry) {
@@ -503,7 +501,6 @@
pr_debug("spidev: nothing for minor %d\n", iminor(inode));
mutex_unlock(&device_list_lock);
- unlock_kernel();
return status;
}
diff --git a/drivers/staging/go7007/Makefile b/drivers/staging/go7007/Makefile
index 1301caa..d37b7ed 100644
--- a/drivers/staging/go7007/Makefile
+++ b/drivers/staging/go7007/Makefile
@@ -5,7 +5,7 @@
obj-$(CONFIG_VIDEO_GO7007) += go7007.o
obj-$(CONFIG_VIDEO_GO7007_USB) += go7007-usb.o
-obj-$(CONFIG_VIDEO_GO7007_USB_S2250_BOARD) += s2250.o
+obj-$(CONFIG_VIDEO_GO7007_USB_S2250_BOARD) += s2250.o s2250-loader.o
obj-$(CONFIG_VIDEO_GO7007_SAA7113) += wis-saa7113.o
obj-$(CONFIG_VIDEO_GO7007_OV7640) += wis-ov7640.o
obj-$(CONFIG_VIDEO_GO7007_SAA7115) += wis-saa7115.o
@@ -17,7 +17,7 @@
go7007-objs += go7007-v4l2.o go7007-driver.o go7007-i2c.o go7007-fw.o \
snd-go7007.o
-s2250-objs += s2250-board.o s2250-loader.o
+s2250-objs += s2250-board.o
# Uncomment when the saa7134 patches get into upstream
#ifneq ($(CONFIG_VIDEO_SAA7134),)
diff --git a/drivers/staging/go7007/go7007-driver.c b/drivers/staging/go7007/go7007-driver.c
index 472f4bb..fb1345f 100644
--- a/drivers/staging/go7007/go7007-driver.c
+++ b/drivers/staging/go7007/go7007-driver.c
@@ -49,7 +49,7 @@
go->hpi_ops->read_interrupt(go);
if (wait_event_timeout(go->interrupt_waitq,
go->interrupt_available, 5*HZ) < 0) {
- v4l2_err(go->video_dev, "timeout waiting for read interrupt\n");
+ v4l2_err(&go->v4l2_dev, "timeout waiting for read interrupt\n");
return -1;
}
if (!go->interrupt_available)
@@ -193,7 +193,8 @@
static int init_i2c_module(struct i2c_adapter *adapter, const char *type,
int id, int addr)
{
- struct i2c_board_info info;
+ struct go7007 *go = i2c_get_adapdata(adapter);
+ struct v4l2_device *v4l2_dev = &go->v4l2_dev;
char *modname;
switch (id) {
@@ -219,20 +220,16 @@
modname = "wis-ov7640";
break;
case I2C_DRIVERID_S2250:
- modname = "s2250-board";
+ modname = "s2250";
break;
default:
modname = NULL;
break;
}
- if (modname != NULL)
- request_module(modname);
- memset(&info, 0, sizeof(struct i2c_board_info));
- info.addr = addr;
- strlcpy(info.type, type, I2C_NAME_SIZE);
- if (!i2c_new_device(adapter, &info))
+ if (v4l2_i2c_new_subdev(v4l2_dev, adapter, modname, type, addr, NULL))
return 0;
+
if (modname != NULL)
printk(KERN_INFO
"go7007: probing for module %s failed\n", modname);
@@ -262,6 +259,11 @@
if (ret < 0)
return -1;
+ /* v4l2 init must happen before i2c subdevs */
+ ret = go7007_v4l2_init(go);
+ if (ret < 0)
+ return ret;
+
if (!go->i2c_adapter_online &&
go->board_info->flags & GO7007_BOARD_USE_ONBOARD_I2C) {
if (go7007_i2c_init(go) < 0)
@@ -282,7 +284,7 @@
go->audio_enabled = 1;
go7007_snd_init(go);
}
- return go7007_v4l2_init(go);
+ return 0;
}
EXPORT_SYMBOL(go7007_register_encoder);
@@ -315,7 +317,7 @@
if (go7007_send_firmware(go, fw, fw_len) < 0 ||
go7007_read_interrupt(go, &intr_val, &intr_data) < 0) {
- v4l2_err(go->video_dev, "error transferring firmware\n");
+ v4l2_err(&go->v4l2_dev, "error transferring firmware\n");
rv = -1;
goto start_error;
}
@@ -324,7 +326,7 @@
go->parse_length = 0;
go->seen_frame = 0;
if (go7007_stream_start(go) < 0) {
- v4l2_err(go->video_dev, "error starting stream transfer\n");
+ v4l2_err(&go->v4l2_dev, "error starting stream transfer\n");
rv = -1;
goto start_error;
}
@@ -420,7 +422,7 @@
for (i = 0; i < length; ++i) {
if (go->active_buf != NULL &&
go->active_buf->bytesused >= GO7007_BUF_SIZE - 3) {
- v4l2_info(go->video_dev, "dropping oversized frame\n");
+ v4l2_info(&go->v4l2_dev, "dropping oversized frame\n");
go->active_buf->offset -= go->active_buf->bytesused;
go->active_buf->bytesused = 0;
go->active_buf->modet_active = 0;
@@ -668,7 +670,7 @@
if (i2c_del_adapter(&go->i2c_adapter) == 0)
go->i2c_adapter_online = 0;
else
- v4l2_err(go->video_dev,
+ v4l2_err(&go->v4l2_dev,
"error removing I2C adapter!\n");
}
diff --git a/drivers/staging/go7007/go7007-priv.h b/drivers/staging/go7007/go7007-priv.h
index ce9307e..b58c394 100644
--- a/drivers/staging/go7007/go7007-priv.h
+++ b/drivers/staging/go7007/go7007-priv.h
@@ -21,6 +21,8 @@
* user-space applications.
*/
+#include <media/v4l2-device.h>
+
struct go7007;
/* IDs to activate board-specific support code */
@@ -167,6 +169,7 @@
int channel_number; /* for multi-channel boards like Adlink PCI-MPG24 */
char name[64];
struct video_device *video_dev;
+ struct v4l2_device v4l2_dev;
int ref_count;
enum { STATUS_INIT, STATUS_ONLINE, STATUS_SHUTDOWN } status;
spinlock_t spinlock;
@@ -240,6 +243,11 @@
unsigned short interrupt_data;
};
+static inline struct go7007 *to_go7007(struct v4l2_device *v4l2_dev)
+{
+ return container_of(v4l2_dev, struct go7007, v4l2_dev);
+}
+
/* All of these must be called with the hpi_lock mutex held! */
#define go7007_interface_reset(go) \
((go)->hpi_ops->interface_reset(go))
diff --git a/drivers/staging/go7007/go7007-usb.c b/drivers/staging/go7007/go7007-usb.c
index ecaa3c9..1e89dc0 100644
--- a/drivers/staging/go7007/go7007-usb.c
+++ b/drivers/staging/go7007/go7007-usb.c
@@ -425,7 +425,7 @@
.num_i2c_devs = 1,
.i2c_devs = {
{
- .type = "s2250_board",
+ .type = "s2250",
.id = I2C_DRIVERID_S2250,
.addr = 0x43,
},
@@ -1057,7 +1057,7 @@
usb_rcvintpipe(usb->usbdev, 4),
usb->intr_urb->transfer_buffer, 2*sizeof(u16),
go7007_usb_readinterrupt_complete, go, 8);
- usb_set_intfdata(intf, go);
+ usb_set_intfdata(intf, &go->v4l2_dev);
/* Boot the GO7007 */
if (go7007_boot_encoder(go, go->board_info->flags &
@@ -1233,7 +1233,7 @@
static void go7007_usb_disconnect(struct usb_interface *intf)
{
- struct go7007 *go = usb_get_intfdata(intf);
+ struct go7007 *go = to_go7007(usb_get_intfdata(intf));
struct go7007_usb *usb = go->hpi_context;
struct urb *vurb, *aurb;
int i;
diff --git a/drivers/staging/go7007/go7007-v4l2.c b/drivers/staging/go7007/go7007-v4l2.c
index 4bd353a..b18d8e2 100644
--- a/drivers/staging/go7007/go7007-v4l2.c
+++ b/drivers/staging/go7007/go7007-v4l2.c
@@ -29,6 +29,7 @@
#include <linux/videodev2.h>
#include <media/v4l2-common.h>
#include <media/v4l2-ioctl.h>
+#include <media/v4l2-subdev.h>
#include <linux/i2c.h>
#include <linux/mutex.h>
#include <linux/uaccess.h>
@@ -46,6 +47,9 @@
#define V4L2_MPEG_VIDEO_ENCODING_MPEG_4 3
#endif
+#define call_all(dev, o, f, args...) \
+ v4l2_device_call_until_err(dev, 0, o, f, ##args)
+
static void deactivate_buffer(struct go7007_buffer *gobuf)
{
int i;
@@ -247,19 +251,23 @@
go->modet_map[i] = 0;
if (go->board_info->sensor_flags & GO7007_SENSOR_SCALING) {
- struct video_decoder_resolution res;
+ struct v4l2_format res;
- res.width = width;
+ if (fmt != NULL) {
+ res = *fmt;
+ } else {
+ res.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+ res.fmt.pix.width = width;
+ }
+
if (height > sensor_height / 2) {
- res.height = height / 2;
+ res.fmt.pix.height = height / 2;
go->encoder_v_halve = 0;
} else {
- res.height = height;
+ res.fmt.pix.height = height;
go->encoder_v_halve = 1;
}
- if (go->i2c_adapter_online)
- i2c_clients_command(&go->i2c_adapter,
- DECODER_SET_RESOLUTION, &res);
+ call_all(&go->v4l2_dev, video, s_fmt, &res);
} else {
if (width <= sensor_width / 4) {
go->encoder_h_halve = 1;
@@ -385,7 +393,7 @@
}
#endif
-static int mpeg_queryctrl(struct v4l2_queryctrl *ctrl)
+static int mpeg_query_ctrl(struct v4l2_queryctrl *ctrl)
{
static const u32 mpeg_ctrls[] = {
V4L2_CID_MPEG_CLASS,
@@ -973,51 +981,35 @@
struct v4l2_queryctrl *query)
{
struct go7007 *go = ((struct go7007_file *) priv)->go;
+ int id = query->id;
- if (!go->i2c_adapter_online)
- return -EIO;
+ if (0 == call_all(&go->v4l2_dev, core, queryctrl, query))
+ return 0;
- i2c_clients_command(&go->i2c_adapter, VIDIOC_QUERYCTRL, query);
-
- return (!query->name[0]) ? mpeg_queryctrl(query) : 0;
+ query->id = id;
+ return mpeg_query_ctrl(query);
}
static int vidioc_g_ctrl(struct file *file, void *priv,
struct v4l2_control *ctrl)
{
struct go7007 *go = ((struct go7007_file *) priv)->go;
- struct v4l2_queryctrl query;
- if (!go->i2c_adapter_online)
- return -EIO;
+ if (0 == call_all(&go->v4l2_dev, core, g_ctrl, ctrl))
+ return 0;
- memset(&query, 0, sizeof(query));
- query.id = ctrl->id;
- i2c_clients_command(&go->i2c_adapter, VIDIOC_QUERYCTRL, &query);
- if (query.name[0] == 0)
- return mpeg_g_ctrl(ctrl, go);
- i2c_clients_command(&go->i2c_adapter, VIDIOC_G_CTRL, ctrl);
-
- return 0;
+ return mpeg_g_ctrl(ctrl, go);
}
static int vidioc_s_ctrl(struct file *file, void *priv,
struct v4l2_control *ctrl)
{
struct go7007 *go = ((struct go7007_file *) priv)->go;
- struct v4l2_queryctrl query;
- if (!go->i2c_adapter_online)
- return -EIO;
+ if (0 == call_all(&go->v4l2_dev, core, s_ctrl, ctrl))
+ return 0;
- memset(&query, 0, sizeof(query));
- query.id = ctrl->id;
- i2c_clients_command(&go->i2c_adapter, VIDIOC_QUERYCTRL, &query);
- if (query.name[0] == 0)
- return mpeg_s_ctrl(ctrl, go);
- i2c_clients_command(&go->i2c_adapter, VIDIOC_S_CTRL, ctrl);
-
- return 0;
+ return mpeg_s_ctrl(ctrl, go);
}
static int vidioc_g_parm(struct file *filp, void *priv,
@@ -1135,8 +1127,7 @@
if (go->streaming)
return -EBUSY;
- if (!(go->board_info->sensor_flags & GO7007_SENSOR_TV) &&
- *std != 0)
+ if (!(go->board_info->sensor_flags & GO7007_SENSOR_TV) && *std != 0)
return -EINVAL;
if (*std == 0)
@@ -1146,9 +1137,7 @@
go->input == go->board_info->num_inputs - 1) {
if (!go->i2c_adapter_online)
return -EIO;
- i2c_clients_command(&go->i2c_adapter,
- VIDIOC_S_STD, std);
- if (!*std) /* hack to indicate EINVAL from tuner */
+ if (call_all(&go->v4l2_dev, core, s_std, *std) < 0)
return -EINVAL;
}
@@ -1164,9 +1153,7 @@
} else
return -EINVAL;
- if (go->i2c_adapter_online)
- i2c_clients_command(&go->i2c_adapter,
- VIDIOC_S_STD, std);
+ call_all(&go->v4l2_dev, core, s_std, *std);
set_capture_size(go, NULL, 0);
return 0;
@@ -1180,7 +1167,7 @@
go->input == go->board_info->num_inputs - 1) {
if (!go->i2c_adapter_online)
return -EIO;
- i2c_clients_command(&go->i2c_adapter, VIDIOC_QUERYSTD, std);
+ return call_all(&go->v4l2_dev, video, querystd, std);
} else if (go->board_info->sensor_flags & GO7007_SENSOR_TV)
*std = V4L2_STD_NTSC | V4L2_STD_PAL | V4L2_STD_SECAM;
else
@@ -1238,14 +1225,8 @@
return -EBUSY;
go->input = input;
- if (go->i2c_adapter_online) {
- i2c_clients_command(&go->i2c_adapter, VIDIOC_S_INPUT,
- &go->board_info->inputs[input].video_input);
- i2c_clients_command(&go->i2c_adapter, VIDIOC_S_AUDIO,
- &go->board_info->inputs[input].audio_input);
- }
- return 0;
+ return call_all(&go->v4l2_dev, video, s_routing, input, 0, 0);
}
static int vidioc_g_tuner(struct file *file, void *priv,
@@ -1260,10 +1241,7 @@
if (!go->i2c_adapter_online)
return -EIO;
- i2c_clients_command(&go->i2c_adapter, VIDIOC_G_TUNER, t);
-
- t->index = 0;
- return 0;
+ return call_all(&go->v4l2_dev, tuner, g_tuner, t);
}
static int vidioc_s_tuner(struct file *file, void *priv,
@@ -1287,9 +1265,7 @@
break;
}
- i2c_clients_command(&go->i2c_adapter, VIDIOC_S_TUNER, t);
-
- return 0;
+ return call_all(&go->v4l2_dev, tuner, s_tuner, t);
}
static int vidioc_g_frequency(struct file *file, void *priv,
@@ -1303,8 +1279,8 @@
return -EIO;
f->type = V4L2_TUNER_ANALOG_TV;
- i2c_clients_command(&go->i2c_adapter, VIDIOC_G_FREQUENCY, f);
- return 0;
+
+ return call_all(&go->v4l2_dev, tuner, g_frequency, f);
}
static int vidioc_s_frequency(struct file *file, void *priv,
@@ -1317,9 +1293,7 @@
if (!go->i2c_adapter_online)
return -EIO;
- i2c_clients_command(&go->i2c_adapter, VIDIOC_S_FREQUENCY, f);
-
- return 0;
+ return call_all(&go->v4l2_dev, tuner, s_frequency, f);
}
static int vidioc_cropcap(struct file *file, void *priv,
@@ -1827,7 +1801,7 @@
go->video_dev = video_device_alloc();
if (go->video_dev == NULL)
return -ENOMEM;
- memcpy(go->video_dev, &go7007_template, sizeof(go7007_template));
+ *go->video_dev = go7007_template;
go->video_dev->parent = go->dev;
rv = video_register_device(go->video_dev, VFL_TYPE_GRABBER, -1);
if (rv < 0) {
@@ -1835,6 +1809,12 @@
go->video_dev = NULL;
return rv;
}
+ rv = v4l2_device_register(go->dev, &go->v4l2_dev);
+ if (rv < 0) {
+ video_device_release(go->video_dev);
+ go->video_dev = NULL;
+ return rv;
+ }
video_set_drvdata(go->video_dev, go);
++go->ref_count;
printk(KERN_INFO "%s: registered device video%d [v4l2]\n",
@@ -1858,4 +1838,5 @@
mutex_unlock(&go->hw_lock);
if (go->video_dev)
video_unregister_device(go->video_dev);
+ v4l2_device_unregister(&go->v4l2_dev);
}
diff --git a/drivers/staging/go7007/s2250-board.c b/drivers/staging/go7007/s2250-board.c
index f4a6541..8cf7f27 100644
--- a/drivers/staging/go7007/s2250-board.c
+++ b/drivers/staging/go7007/s2250-board.c
@@ -20,10 +20,14 @@
#include <linux/usb.h>
#include <linux/i2c.h>
#include <linux/videodev2.h>
+#include <media/v4l2-device.h>
#include <media/v4l2-common.h>
-#include "s2250-loader.h"
+#include <media/v4l2-i2c-drv.h>
+#include <media/v4l2-subdev.h>
#include "go7007-priv.h"
-#include "wis-i2c.h"
+
+MODULE_DESCRIPTION("Sensoray 2250/2251 i2c v4l2 subdev driver");
+MODULE_LICENSE("GPL v2");
#define TLV320_ADDRESS 0x34
#define VPX322_ADDR_ANALOGCONTROL1 0x02
@@ -112,6 +116,7 @@
};
struct s2250 {
+ struct v4l2_subdev sd;
v4l2_std_id std;
int input;
int brightness;
@@ -123,6 +128,11 @@
struct i2c_client *audio;
};
+static inline struct s2250 *to_state(struct v4l2_subdev *sd)
+{
+ return container_of(sd, struct s2250, sd);
+}
+
/* from go7007-usb.c which is Copyright (C) 2005-2006 Micronas USA Inc.*/
static int go7007_usb_vendor_request(struct go7007 *go, u16 request,
u16 value, u16 index, void *transfer_buffer, int length, int in)
@@ -306,253 +316,262 @@
}
-static int s2250_command(struct i2c_client *client,
- unsigned int cmd, void *arg)
+/* ------------------------------------------------------------------------- */
+
+static int s2250_s_video_routing(struct v4l2_subdev *sd, u32 input, u32 output,
+ u32 config)
{
- struct s2250 *dec = i2c_get_clientdata(client);
+ struct s2250 *state = to_state(sd);
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+ int vidsys;
- switch (cmd) {
- case VIDIOC_S_INPUT:
- {
- int vidsys;
- int *input = arg;
+ vidsys = (state->std == V4L2_STD_NTSC) ? 0x01 : 0x00;
+ if (input == 0) {
+ /* composite */
+ write_reg_fp(client, 0x20, 0x020 | vidsys);
+ write_reg_fp(client, 0x21, 0x662);
+ write_reg_fp(client, 0x140, 0x060);
+ } else if (input == 1) {
+ /* S-Video */
+ write_reg_fp(client, 0x20, 0x040 | vidsys);
+ write_reg_fp(client, 0x21, 0x666);
+ write_reg_fp(client, 0x140, 0x060);
+ } else {
+ return -EINVAL;
+ }
+ state->input = input;
+ return 0;
+}
- vidsys = (dec->std == V4L2_STD_NTSC) ? 0x01 : 0x00;
- if (*input == 0) {
- /* composite */
- write_reg_fp(client, 0x20, 0x020 | vidsys);
- write_reg_fp(client, 0x21, 0x662);
- write_reg_fp(client, 0x140, 0x060);
- } else {
- /* S-Video */
- write_reg_fp(client, 0x20, 0x040 | vidsys);
- write_reg_fp(client, 0x21, 0x666);
- write_reg_fp(client, 0x140, 0x060);
- }
- dec->input = *input;
+static int s2250_s_std(struct v4l2_subdev *sd, v4l2_std_id norm)
+{
+ struct s2250 *state = to_state(sd);
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+ u16 vidsource;
+
+ vidsource = (state->input == 1) ? 0x040 : 0x020;
+ switch (norm) {
+ case V4L2_STD_NTSC:
+ write_regs_fp(client, vid_regs_fp);
+ write_reg_fp(client, 0x20, vidsource | 1);
break;
- }
- case VIDIOC_S_STD:
- {
- v4l2_std_id *std = arg;
- u16 vidsource;
-
- vidsource = (dec->input == 1) ? 0x040 : 0x020;
- dec->std = *std;
- switch (dec->std) {
- case V4L2_STD_NTSC:
- write_regs_fp(client, vid_regs_fp);
- write_reg_fp(client, 0x20, vidsource | 1);
- break;
- case V4L2_STD_PAL:
- write_regs_fp(client, vid_regs_fp);
- write_regs_fp(client, vid_regs_fp_pal);
- write_reg_fp(client, 0x20, vidsource);
- break;
- default:
- return -EINVAL;
- }
+ case V4L2_STD_PAL:
+ write_regs_fp(client, vid_regs_fp);
+ write_regs_fp(client, vid_regs_fp_pal);
+ write_reg_fp(client, 0x20, vidsource);
break;
- }
- case VIDIOC_QUERYCTRL:
- {
- struct v4l2_queryctrl *ctrl = arg;
- static const u32 user_ctrls[] = {
- V4L2_CID_BRIGHTNESS,
- V4L2_CID_CONTRAST,
- V4L2_CID_SATURATION,
- V4L2_CID_HUE,
- 0
- };
- static const u32 *ctrl_classes[] = {
- user_ctrls,
- NULL
- };
-
- ctrl->id = v4l2_ctrl_next(ctrl_classes, ctrl->id);
- switch (ctrl->id) {
- case V4L2_CID_BRIGHTNESS:
- v4l2_ctrl_query_fill(ctrl, 0, 100, 1, 50);
- break;
- case V4L2_CID_CONTRAST:
- v4l2_ctrl_query_fill(ctrl, 0, 100, 1, 50);
- break;
- case V4L2_CID_SATURATION:
- v4l2_ctrl_query_fill(ctrl, 0, 100, 1, 50);
- break;
- case V4L2_CID_HUE:
- v4l2_ctrl_query_fill(ctrl, -50, 50, 1, 0);
- break;
- default:
- ctrl->name[0] = '\0';
- return -EINVAL;
- }
- break;
- }
- case VIDIOC_S_CTRL:
- {
- struct v4l2_control *ctrl = arg;
- int value1;
- u16 oldvalue;
-
- switch (ctrl->id) {
- case V4L2_CID_BRIGHTNESS:
- if (ctrl->value > 100)
- dec->brightness = 100;
- else if (ctrl->value < 0)
- dec->brightness = 0;
- else
- dec->brightness = ctrl->value;
- value1 = (dec->brightness - 50) * 255 / 100;
- read_reg_fp(client, VPX322_ADDR_BRIGHTNESS0, &oldvalue);
- write_reg_fp(client, VPX322_ADDR_BRIGHTNESS0,
- value1 | (oldvalue & ~0xff));
- read_reg_fp(client, VPX322_ADDR_BRIGHTNESS1, &oldvalue);
- write_reg_fp(client, VPX322_ADDR_BRIGHTNESS1,
- value1 | (oldvalue & ~0xff));
- write_reg_fp(client, 0x140, 0x60);
- break;
- case V4L2_CID_CONTRAST:
- if (ctrl->value > 100)
- dec->contrast = 100;
- else if (ctrl->value < 0)
- dec->contrast = 0;
- else
- dec->contrast = ctrl->value;
- value1 = dec->contrast * 0x40 / 100;
- if (value1 > 0x3f)
- value1 = 0x3f; /* max */
- read_reg_fp(client, VPX322_ADDR_CONTRAST0, &oldvalue);
- write_reg_fp(client, VPX322_ADDR_CONTRAST0,
- value1 | (oldvalue & ~0x3f));
- read_reg_fp(client, VPX322_ADDR_CONTRAST1, &oldvalue);
- write_reg_fp(client, VPX322_ADDR_CONTRAST1,
- value1 | (oldvalue & ~0x3f));
- write_reg_fp(client, 0x140, 0x60);
- break;
- case V4L2_CID_SATURATION:
- if (ctrl->value > 127)
- dec->saturation = 127;
- else if (ctrl->value < 0)
- dec->saturation = 0;
- else
- dec->saturation = ctrl->value;
-
- value1 = dec->saturation * 4140 / 100;
- if (value1 > 4094)
- value1 = 4094;
- write_reg_fp(client, VPX322_ADDR_SAT, value1);
- break;
- case V4L2_CID_HUE:
- if (ctrl->value > 50)
- dec->hue = 50;
- else if (ctrl->value < -50)
- dec->hue = -50;
- else
- dec->hue = ctrl->value;
- /* clamp the hue range */
- value1 = dec->hue * 280 / 50;
- write_reg_fp(client, VPX322_ADDR_HUE, value1);
- break;
- }
- break;
- }
- case VIDIOC_G_CTRL:
- {
- struct v4l2_control *ctrl = arg;
-
- switch (ctrl->id) {
- case V4L2_CID_BRIGHTNESS:
- ctrl->value = dec->brightness;
- break;
- case V4L2_CID_CONTRAST:
- ctrl->value = dec->contrast;
- break;
- case V4L2_CID_SATURATION:
- ctrl->value = dec->saturation;
- break;
- case V4L2_CID_HUE:
- ctrl->value = dec->hue;
- break;
- }
- break;
- }
- case VIDIOC_S_FMT:
- {
- struct v4l2_format *fmt = arg;
- if (fmt->fmt.pix.height < 640) {
- write_reg_fp(client, 0x12b, dec->reg12b_val | 0x400);
- write_reg_fp(client, 0x140, 0x060);
- } else {
- write_reg_fp(client, 0x12b, dec->reg12b_val & ~0x400);
- write_reg_fp(client, 0x140, 0x060);
- }
- return 0;
- }
- case VIDIOC_G_AUDIO:
- {
- struct v4l2_audio *audio = arg;
-
- memset(audio, 0, sizeof(*audio));
- audio->index = dec->audio_input;
- /* fall through */
- }
- case VIDIOC_ENUMAUDIO:
- {
- struct v4l2_audio *audio = arg;
-
- switch (audio->index) {
- case 0:
- strcpy(audio->name, "Line In");
- break;
- case 1:
- strcpy(audio->name, "Mic");
- break;
- case 2:
- strcpy(audio->name, "Mic Boost");
- break;
- default:
- audio->name[0] = '\0';
- return 0;
- }
- audio->capability = V4L2_AUDCAP_STEREO;
- audio->mode = 0;
- return 0;
- }
- case VIDIOC_S_AUDIO:
- {
- struct v4l2_audio *audio = arg;
-
- switch (audio->index) {
- case 0:
- write_reg(dec->audio, 0x08, 0x02); /* Line In */
- break;
- case 1:
- write_reg(dec->audio, 0x08, 0x04); /* Mic */
- break;
- case 2:
- write_reg(dec->audio, 0x08, 0x05); /* Mic Boost */
- break;
- default:
- return -EINVAL;
- }
- dec->audio_input = audio->index;
- return 0;
- }
-
default:
- printk(KERN_INFO "s2250: unknown command 0x%x\n", cmd);
- break;
+ return -EINVAL;
+ }
+ state->std = norm;
+ return 0;
+}
+
+static int s2250_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *query)
+{
+ switch (query->id) {
+ case V4L2_CID_BRIGHTNESS:
+ return v4l2_ctrl_query_fill(query, 0, 100, 1, 50);
+ case V4L2_CID_CONTRAST:
+ return v4l2_ctrl_query_fill(query, 0, 100, 1, 50);
+ case V4L2_CID_SATURATION:
+ return v4l2_ctrl_query_fill(query, 0, 100, 1, 50);
+ case V4L2_CID_HUE:
+ return v4l2_ctrl_query_fill(query, -50, 50, 1, 0);
+ default:
+ return -EINVAL;
}
return 0;
}
+static int s2250_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+{
+ struct s2250 *state = to_state(sd);
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+ int value1;
+ u16 oldvalue;
+
+ switch (ctrl->id) {
+ case V4L2_CID_BRIGHTNESS:
+ if (ctrl->value > 100)
+ state->brightness = 100;
+ else if (ctrl->value < 0)
+ state->brightness = 0;
+ else
+ state->brightness = ctrl->value;
+ value1 = (state->brightness - 50) * 255 / 100;
+ read_reg_fp(client, VPX322_ADDR_BRIGHTNESS0, &oldvalue);
+ write_reg_fp(client, VPX322_ADDR_BRIGHTNESS0,
+ value1 | (oldvalue & ~0xff));
+ read_reg_fp(client, VPX322_ADDR_BRIGHTNESS1, &oldvalue);
+ write_reg_fp(client, VPX322_ADDR_BRIGHTNESS1,
+ value1 | (oldvalue & ~0xff));
+ write_reg_fp(client, 0x140, 0x60);
+ break;
+ case V4L2_CID_CONTRAST:
+ if (ctrl->value > 100)
+ state->contrast = 100;
+ else if (ctrl->value < 0)
+ state->contrast = 0;
+ else
+ state->contrast = ctrl->value;
+ value1 = state->contrast * 0x40 / 100;
+ if (value1 > 0x3f)
+ value1 = 0x3f; /* max */
+ read_reg_fp(client, VPX322_ADDR_CONTRAST0, &oldvalue);
+ write_reg_fp(client, VPX322_ADDR_CONTRAST0,
+ value1 | (oldvalue & ~0x3f));
+ read_reg_fp(client, VPX322_ADDR_CONTRAST1, &oldvalue);
+ write_reg_fp(client, VPX322_ADDR_CONTRAST1,
+ value1 | (oldvalue & ~0x3f));
+ write_reg_fp(client, 0x140, 0x60);
+ break;
+ case V4L2_CID_SATURATION:
+ if (ctrl->value > 100)
+ state->saturation = 100;
+ else if (ctrl->value < 0)
+ state->saturation = 0;
+ else
+ state->saturation = ctrl->value;
+ value1 = state->saturation * 4140 / 100;
+ if (value1 > 4094)
+ value1 = 4094;
+ write_reg_fp(client, VPX322_ADDR_SAT, value1);
+ break;
+ case V4L2_CID_HUE:
+ if (ctrl->value > 50)
+ state->hue = 50;
+ else if (ctrl->value < -50)
+ state->hue = -50;
+ else
+ state->hue = ctrl->value;
+ /* clamp the hue range */
+ value1 = state->hue * 280 / 50;
+ write_reg_fp(client, VPX322_ADDR_HUE, value1);
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int s2250_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+{
+ struct s2250 *state = to_state(sd);
+
+ switch (ctrl->id) {
+ case V4L2_CID_BRIGHTNESS:
+ ctrl->value = state->brightness;
+ break;
+ case V4L2_CID_CONTRAST:
+ ctrl->value = state->contrast;
+ break;
+ case V4L2_CID_SATURATION:
+ ctrl->value = state->saturation;
+ break;
+ case V4L2_CID_HUE:
+ ctrl->value = state->hue;
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int s2250_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt)
+{
+ struct s2250 *state = to_state(sd);
+ struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+ if (fmt->fmt.pix.height < 640) {
+ write_reg_fp(client, 0x12b, state->reg12b_val | 0x400);
+ write_reg_fp(client, 0x140, 0x060);
+ } else {
+ write_reg_fp(client, 0x12b, state->reg12b_val & ~0x400);
+ write_reg_fp(client, 0x140, 0x060);
+ }
+ return 0;
+}
+
+static int s2250_s_audio_routing(struct v4l2_subdev *sd, u32 input, u32 output,
+ u32 config)
+{
+ struct s2250 *state = to_state(sd);
+
+ switch (input) {
+ case 0:
+ write_reg(state->audio, 0x08, 0x02); /* Line In */
+ break;
+ case 1:
+ write_reg(state->audio, 0x08, 0x04); /* Mic */
+ break;
+ case 2:
+ write_reg(state->audio, 0x08, 0x05); /* Mic Boost */
+ break;
+ default:
+ return -EINVAL;
+ }
+ state->audio_input = input;
+ return 0;
+}
+
+
+static int s2250_log_status(struct v4l2_subdev *sd)
+{
+ struct s2250 *state = to_state(sd);
+
+ v4l2_info(sd, "Standard: %s\n", state->std == V4L2_STD_NTSC ? "NTSC" :
+ state->std == V4L2_STD_PAL ? "PAL" :
+ state->std == V4L2_STD_SECAM ? "SECAM" :
+ "unknown");
+ v4l2_info(sd, "Input: %s\n", state->input == 0 ? "Composite" :
+ state->input == 1 ? "S-video" :
+ "error");
+ v4l2_info(sd, "Brightness: %d\n", state->brightness);
+ v4l2_info(sd, "Contrast: %d\n", state->contrast);
+ v4l2_info(sd, "Saturation: %d\n", state->saturation);
+ v4l2_info(sd, "Hue: %d\n", state->hue); return 0;
+ v4l2_info(sd, "Audio input: %s\n", state->audio_input == 0 ? "Line In" :
+ state->audio_input == 1 ? "Mic" :
+ state->audio_input == 2 ? "Mic Boost" :
+ "error");
+ return 0;
+}
+
+/* --------------------------------------------------------------------------*/
+
+static const struct v4l2_subdev_core_ops s2250_core_ops = {
+ .log_status = s2250_log_status,
+ .g_ctrl = s2250_g_ctrl,
+ .s_ctrl = s2250_s_ctrl,
+ .queryctrl = s2250_queryctrl,
+ .s_std = s2250_s_std,
+};
+
+static const struct v4l2_subdev_audio_ops s2250_audio_ops = {
+ .s_routing = s2250_s_audio_routing,
+};
+
+static const struct v4l2_subdev_video_ops s2250_video_ops = {
+ .s_routing = s2250_s_video_routing,
+ .s_fmt = s2250_s_fmt,
+};
+
+static const struct v4l2_subdev_ops s2250_ops = {
+ .core = &s2250_core_ops,
+ .audio = &s2250_audio_ops,
+ .video = &s2250_video_ops,
+};
+
+/* --------------------------------------------------------------------------*/
+
static int s2250_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct i2c_client *audio;
struct i2c_adapter *adapter = client->adapter;
- struct s2250 *dec;
+ struct s2250 *state;
+ struct v4l2_subdev *sd;
u8 *data;
struct go7007 *go = i2c_get_adapdata(adapter);
struct go7007_usb *usb = go->hpi_context;
@@ -561,30 +580,31 @@
if (audio == NULL)
return -ENOMEM;
- dec = kmalloc(sizeof(struct s2250), GFP_KERNEL);
- if (dec == NULL) {
+ state = kmalloc(sizeof(struct s2250), GFP_KERNEL);
+ if (state == NULL) {
i2c_unregister_device(audio);
return -ENOMEM;
}
- dec->std = V4L2_STD_NTSC;
- dec->brightness = 50;
- dec->contrast = 50;
- dec->saturation = 50;
- dec->hue = 0;
- dec->audio = audio;
- i2c_set_clientdata(client, dec);
+ sd = &state->sd;
+ v4l2_i2c_subdev_init(sd, client, &s2250_ops);
- printk(KERN_DEBUG
- "s2250: initializing video decoder on %s\n",
- adapter->name);
+ v4l2_info(sd, "initializing %s at address 0x%x on %s\n",
+ "Sensoray 2250/2251", client->addr, client->adapter->name);
+
+ state->std = V4L2_STD_NTSC;
+ state->brightness = 50;
+ state->contrast = 50;
+ state->saturation = 50;
+ state->hue = 0;
+ state->audio = audio;
/* initialize the audio */
if (write_regs(audio, aud_regs) < 0) {
printk(KERN_ERR
"s2250: error initializing audio\n");
i2c_unregister_device(audio);
- kfree(dec);
+ kfree(state);
return 0;
}
@@ -592,14 +612,14 @@
printk(KERN_ERR
"s2250: error initializing decoder\n");
i2c_unregister_device(audio);
- kfree(dec);
+ kfree(state);
return 0;
}
if (write_regs_fp(client, vid_regs_fp) < 0) {
printk(KERN_ERR
"s2250: error initializing decoder\n");
i2c_unregister_device(audio);
- kfree(dec);
+ kfree(state);
return 0;
}
/* set default channel */
@@ -609,7 +629,7 @@
write_reg_fp(client, 0x140, 0x060);
/* set default audio input */
- dec->audio_input = 0;
+ state->audio_input = 0;
write_reg(client, 0x08, 0x02); /* Line In */
if (mutex_lock_interruptible(&usb->i2c_lock) == 0) {
@@ -634,60 +654,28 @@
mutex_unlock(&usb->i2c_lock);
}
- printk("s2250: initialized successfully\n");
+ v4l2_info(sd, "initialized successfully\n");
return 0;
}
static int s2250_remove(struct i2c_client *client)
{
- struct s2250 *dec = i2c_get_clientdata(client);
+ struct v4l2_subdev *sd = i2c_get_clientdata(client);
- i2c_set_clientdata(client, NULL);
- i2c_unregister_device(dec->audio);
- kfree(dec);
+ v4l2_device_unregister_subdev(sd);
+ kfree(to_state(sd));
return 0;
}
static struct i2c_device_id s2250_id[] = {
- { "s2250_board", 0 },
+ { "s2250", 0 },
{ }
};
+MODULE_DEVICE_TABLE(i2c, s2250_id);
-static struct i2c_driver s2250_driver = {
- .driver = {
- .name = "Sensoray 2250 board driver",
- },
- .probe = s2250_probe,
- .remove = s2250_remove,
- .command = s2250_command,
- .id_table = s2250_id,
+static struct v4l2_i2c_driver_data v4l2_i2c_data = {
+ .name = "s2250",
+ .probe = s2250_probe,
+ .remove = s2250_remove,
+ .id_table = s2250_id,
};
-
-static int __init s2250_init(void)
-{
- int r;
-
- r = s2250loader_init();
- if (r < 0)
- return r;
-
- r = i2c_add_driver(&s2250_driver);
- if (r < 0)
- s2250loader_cleanup();
-
- return r;
-}
-
-static void __exit s2250_cleanup(void)
-{
- i2c_del_driver(&s2250_driver);
-
- s2250loader_cleanup();
-}
-
-module_init(s2250_init);
-module_exit(s2250_cleanup);
-
-MODULE_AUTHOR("");
-MODULE_DESCRIPTION("Board driver for Sensoryray 2250");
-MODULE_LICENSE("GPL v2");
diff --git a/drivers/staging/go7007/s2250-loader.c b/drivers/staging/go7007/s2250-loader.c
index d7bf829..c152ab9 100644
--- a/drivers/staging/go7007/s2250-loader.c
+++ b/drivers/staging/go7007/s2250-loader.c
@@ -162,7 +162,7 @@
.id_table = s2250loader_ids,
};
-int s2250loader_init(void)
+static int __init s2250loader_init(void)
{
int r;
unsigned i = 0;
@@ -179,11 +179,15 @@
printk(KERN_INFO "s2250loader_init: driver registered\n");
return 0;
}
-EXPORT_SYMBOL(s2250loader_init);
+module_init(s2250loader_init);
-void s2250loader_cleanup(void)
+static void __exit s2250loader_cleanup(void)
{
printk(KERN_INFO "s2250loader_cleanup\n");
usb_deregister(&s2250loader_driver);
}
-EXPORT_SYMBOL(s2250loader_cleanup);
+module_exit(s2250loader_cleanup);
+
+MODULE_AUTHOR("");
+MODULE_DESCRIPTION("firmware loader for Sensoray 2250/2251");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/staging/otus/80211core/pub_zfi.h b/drivers/staging/otus/80211core/pub_zfi.h
index a35bd5d..60b7d1c 100644
--- a/drivers/staging/otus/80211core/pub_zfi.h
+++ b/drivers/staging/otus/80211core/pub_zfi.h
@@ -20,7 +20,7 @@
#include "../oal_dt.h"
/***** Section 1 : Tunable Parameters *****/
-/* The defintions in this section are tunabel parameters */
+/* The definitions in this section are tunabel parameters */
/* Maximum number of BSS that could be scaned */
#define ZM_MAX_BSS 128
diff --git a/drivers/staging/otus/zdcompat.h b/drivers/staging/otus/zdcompat.h
index 84ac433..cdcaef5 100644
--- a/drivers/staging/otus/zdcompat.h
+++ b/drivers/staging/otus/zdcompat.h
@@ -17,7 +17,7 @@
/* Module Name : zdcompat.h */
/* */
/* Abstract */
-/* This module contains function defintion for compatibility. */
+/* This module contains function definition for compatibility. */
/* */
/* NOTES */
/* Platform dependent. */
diff --git a/drivers/staging/rtl8187se/r8180.h b/drivers/staging/rtl8187se/r8180.h
index 8216d7e..35ed60b 100644
--- a/drivers/staging/rtl8187se/r8180.h
+++ b/drivers/staging/rtl8187se/r8180.h
@@ -521,7 +521,7 @@
//u32 NumTxOkInPeriod; //YJ,del,080828
u8 TxPollingTimes;
- bool bApBufOurFrame;// TRUE if AP buffer our unicast data , we will keep eAwake untill receive data or timeout.
+ bool bApBufOurFrame;// TRUE if AP buffer our unicast data , we will keep eAwake until receive data or timeout.
u8 WaitBufDataBcnCount;
u8 WaitBufDataTimeOut;
diff --git a/drivers/staging/rtl8192su/r8192S_phyreg.h b/drivers/staging/rtl8192su/r8192S_phyreg.h
index 96c7cfa..acf644f 100644
--- a/drivers/staging/rtl8192su/r8192S_phyreg.h
+++ b/drivers/staging/rtl8192su/r8192S_phyreg.h
@@ -38,7 +38,7 @@
// 2. 0x800/0x900/0xA00/0xC00/0xD00/0xE00
// 3. RF register 0x00-2E
// 4. Bit Mask for BB/RF register
-// 5. Other defintion for BB/RF R/W
+// 5. Other definition for BB/RF R/W
//
diff --git a/drivers/staging/wavelan/wavelan_cs.c b/drivers/staging/wavelan/wavelan_cs.c
index 33918fd..10c702b 100644
--- a/drivers/staging/wavelan/wavelan_cs.c
+++ b/drivers/staging/wavelan/wavelan_cs.c
@@ -3987,7 +3987,7 @@
#endif
/* Prevent reentrancy. We need to do that because we may have
- * multiple interrupt handler running concurently.
+ * multiple interrupt handler running concurrently.
* It is safe because interrupts are disabled before aquiring
* the spinlock. */
spin_lock(&lp->spinlock);
diff --git a/drivers/telephony/ixj.c b/drivers/telephony/ixj.c
index 40de151..e89304c 100644
--- a/drivers/telephony/ixj.c
+++ b/drivers/telephony/ixj.c
@@ -4190,7 +4190,7 @@
ixj_WriteDSPCommand(0x1224, j);
ixj_WriteDSPCommand(0xE014, j);
- ixj_WriteDSPCommand(0x0003, j); /* Lock threashold at 3dB */
+ ixj_WriteDSPCommand(0x0003, j); /* Lock threshold at 3dB */
ixj_WriteDSPCommand(0xE338, j); /* Set Echo Suppresser Attenuation to 0dB */
@@ -4235,7 +4235,7 @@
ixj_WriteDSPCommand(0x1224, j);
ixj_WriteDSPCommand(0xE014, j);
- ixj_WriteDSPCommand(0x0003, j); /* Lock threashold at 3dB */
+ ixj_WriteDSPCommand(0x0003, j); /* Lock threshold at 3dB */
ixj_WriteDSPCommand(0xE338, j); /* Set Echo Suppresser Attenuation to 0dB */
diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c
index d171b56..bba4d3e 100644
--- a/drivers/usb/atm/ueagle-atm.c
+++ b/drivers/usb/atm/ueagle-atm.c
@@ -1958,7 +1958,7 @@
goto bad1;
/* FIXME : ADI930 reply wrong preambule (func = 2, sub = 2) to
- * the first MEMACESS cmv. Ignore it...
+ * the first MEMACCESS cmv. Ignore it...
*/
if (cmv->bFunction != dsc->function) {
if (UEA_CHIP_VERSION(sc) == ADI930
diff --git a/drivers/usb/class/usbtmc.c b/drivers/usb/class/usbtmc.c
index 2473cf0..b4bd241 100644
--- a/drivers/usb/class/usbtmc.c
+++ b/drivers/usb/class/usbtmc.c
@@ -1,5 +1,5 @@
/**
- * drivers/usb/class/usbtmc.c - USB Test & Measurment class driver
+ * drivers/usb/class/usbtmc.c - USB Test & Measurement class driver
*
* Copyright (C) 2007 Stefan Kopp, Gechingen, Germany
* Copyright (C) 2008 Novell, Inc.
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index da718e8..e80f1af 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -1890,7 +1890,7 @@
* routine gets around the normal restrictions by using a work thread to
* submit the change-config request.
*
- * Returns 0 if the request was succesfully queued, error code otherwise.
+ * Returns 0 if the request was successfully queued, error code otherwise.
* The caller has no way to know whether the queued request will eventually
* succeed.
*/
diff --git a/drivers/usb/gadget/f_acm.c b/drivers/usb/gadget/f_acm.c
index 7953948..4e36578 100644
--- a/drivers/usb/gadget/f_acm.c
+++ b/drivers/usb/gadget/f_acm.c
@@ -432,7 +432,7 @@
* @length: size of data
* Context: irqs blocked, acm->lock held, acm_notify_req non-null
*
- * Returns zero on sucess or a negative errno.
+ * Returns zero on success or a negative errno.
*
* See section 6.3.5 of the CDC 1.1 specification for information
* about the only notification we issue: SerialState change.
diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c
index 1937d8c..adda120 100644
--- a/drivers/usb/gadget/pxa27x_udc.c
+++ b/drivers/usb/gadget/pxa27x_udc.c
@@ -1524,7 +1524,7 @@
* pxa_udc_wakeup - Force udc device out of suspend
* @_gadget: usb gadget
*
- * Returns 0 if succesfull, error code otherwise
+ * Returns 0 if successfull, error code otherwise
*/
static int pxa_udc_wakeup(struct usb_gadget *_gadget)
{
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index f5f5601..d8f4aaa 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -210,7 +210,7 @@
if (error) {
ehci_halt(ehci);
ehci_to_hcd(ehci)->state = HC_STATE_HALT;
- ehci_err(ehci, "force halt; handhake %p %08x %08x -> %d\n",
+ ehci_err(ehci, "force halt; handshake %p %08x %08x -> %d\n",
ptr, mask, done, error);
}
diff --git a/drivers/usb/host/fhci-sched.c b/drivers/usb/host/fhci-sched.c
index 62a226b..00a2985 100644
--- a/drivers/usb/host/fhci-sched.c
+++ b/drivers/usb/host/fhci-sched.c
@@ -627,7 +627,7 @@
/*
- * Process normal completions(error or sucess) and clean the schedule.
+ * Process normal completions(error or success) and clean the schedule.
*
* This is the main path for handing urbs back to drivers. The only other patth
* is process_del_list(),which unlinks URBs by scanning EDs,instead of scanning
diff --git a/drivers/usb/wusbcore/crypto.c b/drivers/usb/wusbcore/crypto.c
index 9ec7fd5..9579cf4 100644
--- a/drivers/usb/wusbcore/crypto.c
+++ b/drivers/usb/wusbcore/crypto.c
@@ -111,7 +111,7 @@
*
* CCM uses Ax blocks to generate a keystream with which the MIC and
* the message's payload are encoded. A0 always encrypts/decrypts the
- * MIC. Ax (x>0) are used for the sucesive payload blocks.
+ * MIC. Ax (x>0) are used for the successive payload blocks.
*
* The x is the counter, and is increased for each block.
*/
diff --git a/drivers/usb/wusbcore/wa-xfer.c b/drivers/usb/wusbcore/wa-xfer.c
index 613a5fc..489b478 100644
--- a/drivers/usb/wusbcore/wa-xfer.c
+++ b/drivers/usb/wusbcore/wa-xfer.c
@@ -558,7 +558,7 @@
/*
* Callback for the segment request
*
- * If succesful transition state (unless already transitioned or
+ * If successful transition state (unless already transitioned or
* outbound transfer); otherwise, take a note of the error, mark this
* segment done and try completion.
*
@@ -1364,7 +1364,7 @@
/*
* Callback for the IN data phase
*
- * If succesful transition state; otherwise, take a note of the
+ * If successful transition state; otherwise, take a note of the
* error, mark this segment done and try completion.
*
* Note we don't access until we are sure that the transfer hasn't
diff --git a/drivers/uwb/i1480/dfu/usb.c b/drivers/uwb/i1480/dfu/usb.c
index c7080d4..0bb665a 100644
--- a/drivers/uwb/i1480/dfu/usb.c
+++ b/drivers/uwb/i1480/dfu/usb.c
@@ -229,7 +229,7 @@
* will verify it.
*
* Set i1480->evt_result with the result of getting the event or its
- * size (if succesful).
+ * size (if successful).
*
* Delivers the data directly to i1480->evt_buf
*/
diff --git a/drivers/uwb/neh.c b/drivers/uwb/neh.c
index 0af8916..78510a1 100644
--- a/drivers/uwb/neh.c
+++ b/drivers/uwb/neh.c
@@ -150,7 +150,7 @@
* 0xff is invalid, so they must not be used. Initialization
* fills up those two in the bitmap so they are not allocated.
*
- * We spread the allocation around to reduce the posiblity of two
+ * We spread the allocation around to reduce the possibility of two
* consecutive opened @neh's getting the same context ID assigned (to
* avoid surprises with late events that timed out long time ago). So
* first we search from where @rc->ctx_roll is, if not found, we
diff --git a/drivers/uwb/wlp/txrx.c b/drivers/uwb/wlp/txrx.c
index 86a853b..7350ed6 100644
--- a/drivers/uwb/wlp/txrx.c
+++ b/drivers/uwb/wlp/txrx.c
@@ -282,7 +282,7 @@
* and transmission will be done by the calling function.
* @dst: On return this will contain the device address to which the
* frame is destined.
- * @returns: 0 on success no tx : WLP header sucessfully applied to skb buffer,
+ * @returns: 0 on success no tx : WLP header successfully applied to skb buffer,
* calling function can proceed with tx
* 1 on success with tx : WLP will take over transmission of this
* frame
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 8be523f..bb5fbed 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -2066,6 +2066,7 @@
select FB_SYS_IMAGEBLIT
select FB_SYS_FOPS
select FB_DEFERRED_IO
+ select XEN_XENBUS_FRONTEND
default y
help
This driver implements the front-end of the Xen virtual
diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
index d5e8010..3d886c6 100644
--- a/drivers/video/atmel_lcdfb.c
+++ b/drivers/video/atmel_lcdfb.c
@@ -964,7 +964,7 @@
if (sinfo->atmel_lcdfb_power_control)
sinfo->atmel_lcdfb_power_control(1);
- dev_info(dev, "fb%d: Atmel LCDC at 0x%08lx (mapped at %p), irq %lu\n",
+ dev_info(dev, "fb%d: Atmel LCDC at 0x%08lx (mapped at %p), irq %d\n",
info->node, info->fix.mmio_start, sinfo->mmio, sinfo->irq_base);
return 0;
diff --git a/drivers/video/aty/atyfb_base.c b/drivers/video/aty/atyfb_base.c
index 913b4a4..1ddeb4c 100644
--- a/drivers/video/aty/atyfb_base.c
+++ b/drivers/video/aty/atyfb_base.c
@@ -3276,7 +3276,7 @@
txtformat = "24 bit interface";
break;
default:
- txtformat = "unkown format";
+ txtformat = "unknown format";
}
} else {
switch (format & 7) {
@@ -3299,7 +3299,7 @@
txtformat = "262144 colours (FDPI-2 mode)";
break;
default:
- txtformat = "unkown format";
+ txtformat = "unknown format";
}
}
PRINTKI("%s%s %s monitor detected: %s\n",
diff --git a/drivers/video/backlight/atmel-pwm-bl.c b/drivers/video/backlight/atmel-pwm-bl.c
index 505c082..2cf7ba5 100644
--- a/drivers/video/backlight/atmel-pwm-bl.c
+++ b/drivers/video/backlight/atmel-pwm-bl.c
@@ -158,7 +158,7 @@
goto err_free_pwm;
}
- /* Turn display off by defatult. */
+ /* Turn display off by default. */
retval = gpio_direction_output(pwmbl->gpio_on,
0 ^ pdata->on_active_low);
if (retval)
diff --git a/drivers/video/backlight/tosa_lcd.c b/drivers/video/backlight/tosa_lcd.c
index 50ec17d..fa32b94 100644
--- a/drivers/video/backlight/tosa_lcd.c
+++ b/drivers/video/backlight/tosa_lcd.c
@@ -177,7 +177,7 @@
if (!data)
return -ENOMEM;
- data->is_vga = true; /* defaut to VGA mode */
+ data->is_vga = true; /* default to VGA mode */
/*
* bits_per_word cannot be configured in platform data
diff --git a/drivers/video/broadsheetfb.c b/drivers/video/broadsheetfb.c
index 509cb92..df9ccb9 100644
--- a/drivers/video/broadsheetfb.c
+++ b/drivers/video/broadsheetfb.c
@@ -470,7 +470,7 @@
par->read_reg = broadsheet_read_reg;
init_waitqueue_head(&par->waitq);
- info->flags = FBINFO_FLAG_DEFAULT;
+ info->flags = FBINFO_FLAG_DEFAULT | FBINFO_VIRTFB;
info->fbdefio = &broadsheetfb_defio;
fb_deferred_io_init(info);
diff --git a/drivers/video/console/sticore.c b/drivers/video/console/sticore.c
index 857b366..6468a29 100644
--- a/drivers/video/console/sticore.c
+++ b/drivers/video/console/sticore.c
@@ -436,7 +436,7 @@
(offs < PCI_BASE_ADDRESS_0 ||
offs > PCI_BASE_ADDRESS_5)) {
printk (KERN_WARNING
- "STI pci region maping for region %d (%02x) can't be mapped\n",
+ "STI pci region mapping for region %d (%02x) can't be mapped\n",
i,sti->rm_entry[i]);
continue;
}
diff --git a/drivers/video/fb_defio.c b/drivers/video/fb_defio.c
index c27ab1e..44ce908 100644
--- a/drivers/video/fb_defio.c
+++ b/drivers/video/fb_defio.c
@@ -71,7 +71,7 @@
{
struct fb_info *info = file->private_data;
- /* Skip if deferred io is complied-in but disabled on this fbdev */
+ /* Skip if deferred io is compiled-in but disabled on this fbdev */
if (!info->fbdefio)
return 0;
@@ -144,7 +144,9 @@
static int fb_deferred_io_mmap(struct fb_info *info, struct vm_area_struct *vma)
{
vma->vm_ops = &fb_deferred_io_vm_ops;
- vma->vm_flags |= ( VM_IO | VM_RESERVED | VM_DONTEXPAND );
+ vma->vm_flags |= ( VM_RESERVED | VM_DONTEXPAND );
+ if (!(info->flags & FBINFO_VIRTFB))
+ vma->vm_flags |= VM_IO;
vma->vm_private_data = info;
return 0;
}
diff --git a/drivers/video/gbefb.c b/drivers/video/gbefb.c
index f67db42..695fa01 100644
--- a/drivers/video/gbefb.c
+++ b/drivers/video/gbefb.c
@@ -701,7 +701,7 @@
blocks of 512x128, 256x128 or 128x128 pixels, respectively for 8bit,
16bit and 32 bit modes (64 kB). They cover the screen with partial
tiles on the right and/or bottom of the screen if needed.
- For exemple in 640x480 8 bit mode the mapping is:
+ For example in 640x480 8 bit mode the mapping is:
<-------- 640 ----->
<---- 512 ----><128|384 offscreen>
diff --git a/drivers/video/hecubafb.c b/drivers/video/hecubafb.c
index 0b4bffb..f9d77ad 100644
--- a/drivers/video/hecubafb.c
+++ b/drivers/video/hecubafb.c
@@ -253,7 +253,7 @@
par->send_command = apollo_send_command;
par->send_data = apollo_send_data;
- info->flags = FBINFO_FLAG_DEFAULT;
+ info->flags = FBINFO_FLAG_DEFAULT | FBINFO_VIRTFB;
info->fbdefio = &hecubafb_defio;
fb_deferred_io_init(info);
diff --git a/drivers/video/metronomefb.c b/drivers/video/metronomefb.c
index df1f757..661bfd2 100644
--- a/drivers/video/metronomefb.c
+++ b/drivers/video/metronomefb.c
@@ -700,7 +700,7 @@
if (retval < 0)
goto err_free_irq;
- info->flags = FBINFO_FLAG_DEFAULT;
+ info->flags = FBINFO_FLAG_DEFAULT | FBINFO_VIRTFB;
info->fbdefio = &metronomefb_defio;
fb_deferred_io_init(info);
diff --git a/drivers/video/omap/lcd_ams_delta.c b/drivers/video/omap/lcd_ams_delta.c
index 9340ca3..567db6a 100644
--- a/drivers/video/omap/lcd_ams_delta.c
+++ b/drivers/video/omap/lcd_ams_delta.c
@@ -124,12 +124,12 @@
},
};
-static int ams_delta_panel_drv_init(void)
+static int __init ams_delta_panel_drv_init(void)
{
return platform_driver_register(&ams_delta_panel_driver);
}
-static void ams_delta_panel_drv_cleanup(void)
+static void __exit ams_delta_panel_drv_cleanup(void)
{
platform_driver_unregister(&ams_delta_panel_driver);
}
diff --git a/drivers/video/omap/lcd_mipid.c b/drivers/video/omap/lcd_mipid.c
index 46ca90d..abe1c76 100644
--- a/drivers/video/omap/lcd_mipid.c
+++ b/drivers/video/omap/lcd_mipid.c
@@ -608,7 +608,7 @@
.remove = __devexit_p(mipid_spi_remove),
};
-static int mipid_drv_init(void)
+static int __init mipid_drv_init(void)
{
spi_register_driver(&mipid_spi_driver);
@@ -616,7 +616,7 @@
}
module_init(mipid_drv_init);
-static void mipid_drv_cleanup(void)
+static void __exit mipid_drv_cleanup(void)
{
spi_unregister_driver(&mipid_spi_driver);
}
diff --git a/drivers/video/sgivwfb.c b/drivers/video/sgivwfb.c
index bba5371..f860122 100644
--- a/drivers/video/sgivwfb.c
+++ b/drivers/video/sgivwfb.c
@@ -260,13 +260,13 @@
var->grayscale = 0; /* No grayscale for now */
/* determine valid resolution and timing */
- for (min_mode = 0; min_mode < DBE_VT_SIZE; min_mode++) {
+ for (min_mode = 0; min_mode < ARRAY_SIZE(dbeVTimings); min_mode++) {
if (dbeVTimings[min_mode].width >= var->xres &&
dbeVTimings[min_mode].height >= var->yres)
break;
}
- if (min_mode == DBE_VT_SIZE)
+ if (min_mode == ARRAY_SIZE(dbeVTimings))
return -EINVAL; /* Resolution to high */
/* XXX FIXME - should try to pick best refresh rate */
diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c
index 3ad5157..b4b5de9 100644
--- a/drivers/video/sh_mobile_lcdcfb.c
+++ b/drivers/video/sh_mobile_lcdcfb.c
@@ -281,18 +281,34 @@
struct list_head *pagelist)
{
struct sh_mobile_lcdc_chan *ch = info->par;
- unsigned int nr_pages;
/* enable clocks before accessing hardware */
sh_mobile_lcdc_clk_on(ch->lcdc);
- nr_pages = sh_mobile_lcdc_sginit(info, pagelist);
- dma_map_sg(info->dev, ch->sglist, nr_pages, DMA_TO_DEVICE);
+ /*
+ * It's possible to get here without anything on the pagelist via
+ * sh_mobile_lcdc_deferred_io_touch() or via a userspace fsync()
+ * invocation. In the former case, the acceleration routines are
+ * stepped in to when using the framebuffer console causing the
+ * workqueue to be scheduled without any dirty pages on the list.
+ *
+ * Despite this, a panel update is still needed given that the
+ * acceleration routines have their own methods for writing in
+ * that still need to be updated.
+ *
+ * The fsync() and empty pagelist case could be optimized for,
+ * but we don't bother, as any application exhibiting such
+ * behaviour is fundamentally broken anyways.
+ */
+ if (!list_empty(pagelist)) {
+ unsigned int nr_pages = sh_mobile_lcdc_sginit(info, pagelist);
- /* trigger panel update */
- lcdc_write_chan(ch, LDSM2R, 1);
-
- dma_unmap_sg(info->dev, ch->sglist, nr_pages, DMA_TO_DEVICE);
+ /* trigger panel update */
+ dma_map_sg(info->dev, ch->sglist, nr_pages, DMA_TO_DEVICE);
+ lcdc_write_chan(ch, LDSM2R, 1);
+ dma_unmap_sg(info->dev, ch->sglist, nr_pages, DMA_TO_DEVICE);
+ } else
+ lcdc_write_chan(ch, LDSM2R, 1);
}
static void sh_mobile_lcdc_deferred_io_touch(struct fb_info *info)
diff --git a/drivers/video/stifb.c b/drivers/video/stifb.c
index 6120f0c..876648e 100644
--- a/drivers/video/stifb.c
+++ b/drivers/video/stifb.c
@@ -756,9 +756,9 @@
if (fb->info.var.bits_per_pixel == 32)
controlPlaneReg = 0x04000F00;
else
- controlPlaneReg = 0x00000F00; /* 0x00000800 should be enought, but lets clear all 4 bits */
+ controlPlaneReg = 0x00000F00; /* 0x00000800 should be enough, but lets clear all 4 bits */
else
- controlPlaneReg = 0x00000F00; /* 0x00000100 should be enought, but lets clear all 4 bits */
+ controlPlaneReg = 0x00000F00; /* 0x00000100 should be enough, but lets clear all 4 bits */
switch (enable) {
case ENABLE:
diff --git a/drivers/video/tdfxfb.c b/drivers/video/tdfxfb.c
index ff43c88..9805483 100644
--- a/drivers/video/tdfxfb.c
+++ b/drivers/video/tdfxfb.c
@@ -52,7 +52,7 @@
*
* 0.1.3 (released 1999-11-02) added Attila's panning support, code
* reorg, hwcursor address page size alignment
- * (for mmaping both frame buffer and regs),
+ * (for mmapping both frame buffer and regs),
* and my changes to get rid of hardcoded
* VGA i/o register locations (uses PCI
* configuration info now)
diff --git a/drivers/video/via/dvi.c b/drivers/video/via/dvi.c
index c5c32b6..67b3693 100644
--- a/drivers/video/via/dvi.c
+++ b/drivers/video/via/dvi.c
@@ -467,7 +467,7 @@
default:
viaparinfo->tmds_setting_info->dvi_panel_size =
VIA_RES_1024X768;
- DEBUG_MSG(KERN_INFO "Unknow panel size max resolution = %d !\
+ DEBUG_MSG(KERN_INFO "Unknown panel size max resolution = %d !\
set default panel size.\n", max_h);
break;
}
@@ -534,7 +534,7 @@
default:
viaparinfo->tmds_setting_info->dvi_panel_size =
VIA_RES_1024X768;
- DEBUG_MSG(KERN_INFO "Unknow panel size max resolution = %d!\
+ DEBUG_MSG(KERN_INFO "Unknown panel size max resolution = %d!\
set default panel size.\n", HSize);
break;
}
diff --git a/drivers/video/vt8623fb.c b/drivers/video/vt8623fb.c
index 3df17dc..65ccd21 100644
--- a/drivers/video/vt8623fb.c
+++ b/drivers/video/vt8623fb.c
@@ -446,7 +446,7 @@
svga_wseq_mask(0x1E, 0xF0, 0xF0); // DI/DVP bus
svga_wseq_mask(0x2A, 0x0F, 0x0F); // DI/DVP bus
- svga_wseq_mask(0x16, 0x08, 0xBF); // FIFO read treshold
+ svga_wseq_mask(0x16, 0x08, 0xBF); // FIFO read threshold
vga_wseq(NULL, 0x17, 0x1F); // FIFO depth
vga_wseq(NULL, 0x18, 0x4E);
svga_wseq_mask(0x1A, 0x08, 0x08); // enable MMIO ?
diff --git a/drivers/video/xen-fbfront.c b/drivers/video/xen-fbfront.c
index 54cd916..91a68e9 100644
--- a/drivers/video/xen-fbfront.c
+++ b/drivers/video/xen-fbfront.c
@@ -440,7 +440,7 @@
fb_info->fix.type = FB_TYPE_PACKED_PIXELS;
fb_info->fix.accel = FB_ACCEL_NONE;
- fb_info->flags = FBINFO_FLAG_DEFAULT;
+ fb_info->flags = FBINFO_FLAG_DEFAULT | FBINFO_VIRTFB;
ret = fb_alloc_cmap(&fb_info->cmap, 256, 0);
if (ret < 0) {
diff --git a/drivers/watchdog/coh901327_wdt.c b/drivers/watchdog/coh901327_wdt.c
index 381026c..923cc68 100644
--- a/drivers/watchdog/coh901327_wdt.c
+++ b/drivers/watchdog/coh901327_wdt.c
@@ -508,7 +508,7 @@
* deactivating the watchdog before it is shut down by it.
*
* NOTE: on future versions of the watchdog, this restriction is
- * gone: the watchdog will be reloaded with a defaul value (1 min)
+ * gone: the watchdog will be reloaded with a default value (1 min)
* instead of last value, and you can conveniently set the watchdog
* timeout to 10ms (value = 1) without any problems.
*/
diff --git a/drivers/watchdog/machzwd.c b/drivers/watchdog/machzwd.c
index b6b3f59..47d7197 100644
--- a/drivers/watchdog/machzwd.c
+++ b/drivers/watchdog/machzwd.c
@@ -21,7 +21,7 @@
* wd#1 - 2 seconds;
* wd#2 - 7.2 ms;
* After the expiration of wd#1, it can generate a NMI, SCI, SMI, or
- * a system RESET and it starts wd#2 that unconditionaly will RESET
+ * a system RESET and it starts wd#2 that unconditionally will RESET
* the system when the counter reaches zero.
*
* 14-Dec-2001 Matt Domsch <Matt_Domsch@dell.com>
diff --git a/drivers/watchdog/sb_wdog.c b/drivers/watchdog/sb_wdog.c
index 9748eed..c8eadd4 100644
--- a/drivers/watchdog/sb_wdog.c
+++ b/drivers/watchdog/sb_wdog.c
@@ -1,7 +1,7 @@
/*
* Watchdog driver for SiByte SB1 SoCs
*
- * Copyright (C) 2007 OnStor, Inc. * Andrew Sharp <andy.sharp@onstor.com>
+ * Copyright (C) 2007 OnStor, Inc. * Andrew Sharp <andy.sharp@lsi.com>
*
* This driver is intended to make the second of two hardware watchdogs
* on the Sibyte 12XX and 11XX SoCs available to the user. There are two
@@ -326,7 +326,7 @@
module_init(sbwdog_init);
module_exit(sbwdog_exit);
-MODULE_AUTHOR("Andrew Sharp <andy.sharp@onstor.com>");
+MODULE_AUTHOR("Andrew Sharp <andy.sharp@lsi.com>");
MODULE_DESCRIPTION("SiByte Watchdog");
module_param(timeout, ulong, 0);
diff --git a/drivers/watchdog/wdrtas.c b/drivers/watchdog/wdrtas.c
index 3bde56b..5bfb1f2 100644
--- a/drivers/watchdog/wdrtas.c
+++ b/drivers/watchdog/wdrtas.c
@@ -542,7 +542,7 @@
/**
* wdrtas_get_tokens - reads in RTAS tokens
*
- * returns 0 on succes, <0 on failure
+ * returns 0 on success, <0 on failure
*
* wdrtas_get_tokens reads in the tokens for the RTAS calls used in
* this watchdog driver. It tolerates, if "get-sensor-state" and
@@ -598,7 +598,7 @@
/**
* wdrtas_register_devs - registers the misc dev handlers
*
- * returns 0 on succes, <0 on failure
+ * returns 0 on success, <0 on failure
*
* wdrtas_register_devs registers the watchdog and temperature watchdog
* misc devs
@@ -630,7 +630,7 @@
/**
* wdrtas_init - init function of the watchdog driver
*
- * returns 0 on succes, <0 on failure
+ * returns 0 on success, <0 on failure
*
* registers the file handlers and the reboot notifier
*/
diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c
index d31505b..4204336 100644
--- a/drivers/xen/balloon.c
+++ b/drivers/xen/balloon.c
@@ -66,8 +66,6 @@
/* We aim for 'current allocation' == 'target allocation'. */
unsigned long current_pages;
unsigned long target_pages;
- /* We may hit the hard limit in Xen. If we do then we remember it. */
- unsigned long hard_limit;
/*
* Drivers may alter the memory reservation independently, but they
* must inform the balloon driver so we avoid hitting the hard limit.
@@ -136,6 +134,8 @@
list_add(&page->lru, &ballooned_pages);
balloon_stats.balloon_low++;
}
+
+ totalram_pages--;
}
/* balloon_retrieve: rescue a page from the balloon, if it is not empty. */
@@ -156,6 +156,8 @@
else
balloon_stats.balloon_low--;
+ totalram_pages++;
+
return page;
}
@@ -181,7 +183,7 @@
static unsigned long current_target(void)
{
- unsigned long target = min(balloon_stats.target_pages, balloon_stats.hard_limit);
+ unsigned long target = balloon_stats.target_pages;
target = min(target,
balloon_stats.current_pages +
@@ -217,23 +219,10 @@
set_xen_guest_handle(reservation.extent_start, frame_list);
reservation.nr_extents = nr_pages;
rc = HYPERVISOR_memory_op(XENMEM_populate_physmap, &reservation);
- if (rc < nr_pages) {
- if (rc > 0) {
- int ret;
-
- /* We hit the Xen hard limit: reprobe. */
- reservation.nr_extents = rc;
- ret = HYPERVISOR_memory_op(XENMEM_decrease_reservation,
- &reservation);
- BUG_ON(ret != rc);
- }
- if (rc >= 0)
- balloon_stats.hard_limit = (balloon_stats.current_pages + rc -
- balloon_stats.driver_pages);
+ if (rc < 0)
goto out;
- }
- for (i = 0; i < nr_pages; i++) {
+ for (i = 0; i < rc; i++) {
page = balloon_retrieve();
BUG_ON(page == NULL);
@@ -259,13 +248,12 @@
__free_page(page);
}
- balloon_stats.current_pages += nr_pages;
- totalram_pages = balloon_stats.current_pages;
+ balloon_stats.current_pages += rc;
out:
spin_unlock_irqrestore(&balloon_lock, flags);
- return 0;
+ return rc < 0 ? rc : rc != nr_pages;
}
static int decrease_reservation(unsigned long nr_pages)
@@ -323,7 +311,6 @@
BUG_ON(ret != nr_pages);
balloon_stats.current_pages -= nr_pages;
- totalram_pages = balloon_stats.current_pages;
spin_unlock_irqrestore(&balloon_lock, flags);
@@ -367,7 +354,6 @@
static void balloon_set_new_target(unsigned long target)
{
/* No need for lock. Not read-modify-write updates. */
- balloon_stats.hard_limit = ~0UL;
balloon_stats.target_pages = target;
schedule_work(&balloon_worker);
}
@@ -422,12 +408,10 @@
pr_info("xen_balloon: Initialising balloon driver.\n");
balloon_stats.current_pages = min(xen_start_info->nr_pages, max_pfn);
- totalram_pages = balloon_stats.current_pages;
balloon_stats.target_pages = balloon_stats.current_pages;
balloon_stats.balloon_low = 0;
balloon_stats.balloon_high = 0;
balloon_stats.driver_pages = 0UL;
- balloon_stats.hard_limit = ~0UL;
init_timer(&balloon_timer);
balloon_timer.data = 0;
@@ -472,9 +456,6 @@
BALLOON_SHOW(current_kb, "%lu\n", PAGES2KB(balloon_stats.current_pages));
BALLOON_SHOW(low_kb, "%lu\n", PAGES2KB(balloon_stats.balloon_low));
BALLOON_SHOW(high_kb, "%lu\n", PAGES2KB(balloon_stats.balloon_high));
-BALLOON_SHOW(hard_limit_kb,
- (balloon_stats.hard_limit!=~0UL) ? "%lu\n" : "???\n",
- (balloon_stats.hard_limit!=~0UL) ? PAGES2KB(balloon_stats.hard_limit) : 0);
BALLOON_SHOW(driver_kb, "%lu\n", PAGES2KB(balloon_stats.driver_pages));
static ssize_t show_target_kb(struct sys_device *dev, struct sysdev_attribute *attr,
@@ -544,7 +525,6 @@
&attr_current_kb.attr,
&attr_low_kb.attr,
&attr_high_kb.attr,
- &attr_hard_limit_kb.attr,
&attr_driver_kb.attr,
NULL
};
diff --git a/drivers/xen/events.c b/drivers/xen/events.c
index 2f57276..ce602dd 100644
--- a/drivers/xen/events.c
+++ b/drivers/xen/events.c
@@ -474,6 +474,9 @@
bind_evtchn_to_cpu(evtchn, 0);
evtchn_to_irq[evtchn] = -1;
+ }
+
+ if (irq_info[irq].type != IRQT_UNBOUND) {
irq_info[irq] = mk_unbound_info();
dynamic_irq_cleanup(irq);
diff --git a/drivers/xen/manage.c b/drivers/xen/manage.c
index 10d03d7..c499793 100644
--- a/drivers/xen/manage.c
+++ b/drivers/xen/manage.c
@@ -43,7 +43,6 @@
if (err) {
printk(KERN_ERR "xen_suspend: sysdev_suspend failed: %d\n",
err);
- dpm_resume_noirq(PMSG_RESUME);
return err;
}
@@ -69,7 +68,6 @@
}
sysdev_resume();
- dpm_resume_noirq(PMSG_RESUME);
return 0;
}
@@ -81,6 +79,12 @@
shutting_down = SHUTDOWN_SUSPEND;
+ err = stop_machine_create();
+ if (err) {
+ printk(KERN_ERR "xen suspend: failed to setup stop_machine %d\n", err);
+ goto out;
+ }
+
#ifdef CONFIG_PREEMPT
/* If the kernel is preemptible, we need to freeze all the processes
to prevent them from being in the middle of a pagetable update
@@ -88,29 +92,32 @@
err = freeze_processes();
if (err) {
printk(KERN_ERR "xen suspend: freeze failed %d\n", err);
- return;
+ goto out_destroy_sm;
}
#endif
err = dpm_suspend_start(PMSG_SUSPEND);
if (err) {
printk(KERN_ERR "xen suspend: dpm_suspend_start %d\n", err);
- goto out;
+ goto out_thaw;
+ }
+
+ err = dpm_suspend_noirq(PMSG_SUSPEND);
+ if (err) {
+ printk(KERN_ERR "dpm_suspend_noirq failed: %d\n", err);
+ goto out_resume;
}
printk(KERN_DEBUG "suspending xenstore...\n");
xs_suspend();
- err = dpm_suspend_noirq(PMSG_SUSPEND);
- if (err) {
- printk(KERN_ERR "dpm_suspend_noirq failed: %d\n", err);
- goto resume_devices;
- }
-
err = stop_machine(xen_suspend, &cancelled, cpumask_of(0));
+
+ dpm_resume_noirq(PMSG_RESUME);
+
if (err) {
printk(KERN_ERR "failed to start xen_suspend: %d\n", err);
- goto out;
+ cancelled = 1;
}
if (!cancelled) {
@@ -119,17 +126,21 @@
} else
xs_suspend_cancel();
- dpm_resume_noirq(PMSG_RESUME);
-
-resume_devices:
+out_resume:
dpm_resume_end(PMSG_RESUME);
/* Make sure timer events get retriggered on all CPUs */
clock_was_set();
-out:
+
+out_thaw:
#ifdef CONFIG_PREEMPT
thaw_processes();
+
+out_destroy_sm:
#endif
+ stop_machine_destroy();
+
+out:
shutting_down = SHUTDOWN_INVALID;
}
#endif /* CONFIG_PM_SLEEP */
diff --git a/drivers/xen/xenbus/xenbus_probe.c b/drivers/xen/xenbus/xenbus_probe.c
index d42e25d..649fcdf 100644
--- a/drivers/xen/xenbus/xenbus_probe.c
+++ b/drivers/xen/xenbus/xenbus_probe.c
@@ -454,21 +454,21 @@
{
return sprintf(buf, "%s\n", to_xenbus_device(dev)->nodename);
}
-DEVICE_ATTR(nodename, S_IRUSR | S_IRGRP | S_IROTH, xendev_show_nodename, NULL);
+static DEVICE_ATTR(nodename, S_IRUSR | S_IRGRP | S_IROTH, xendev_show_nodename, NULL);
static ssize_t xendev_show_devtype(struct device *dev,
struct device_attribute *attr, char *buf)
{
return sprintf(buf, "%s\n", to_xenbus_device(dev)->devicetype);
}
-DEVICE_ATTR(devtype, S_IRUSR | S_IRGRP | S_IROTH, xendev_show_devtype, NULL);
+static DEVICE_ATTR(devtype, S_IRUSR | S_IRGRP | S_IROTH, xendev_show_devtype, NULL);
static ssize_t xendev_show_modalias(struct device *dev,
struct device_attribute *attr, char *buf)
{
return sprintf(buf, "xen:%s\n", to_xenbus_device(dev)->devicetype);
}
-DEVICE_ATTR(modalias, S_IRUSR | S_IRGRP | S_IROTH, xendev_show_modalias, NULL);
+static DEVICE_ATTR(modalias, S_IRUSR | S_IRGRP | S_IROTH, xendev_show_modalias, NULL);
int xenbus_probe_node(struct xen_bus_type *bus,
const char *type,
@@ -843,7 +843,7 @@
MODULE_LICENSE("GPL");
-static int is_disconnected_device(struct device *dev, void *data)
+static int is_device_connecting(struct device *dev, void *data)
{
struct xenbus_device *xendev = to_xenbus_device(dev);
struct device_driver *drv = data;
@@ -861,14 +861,15 @@
return 0;
xendrv = to_xenbus_driver(dev->driver);
- return (xendev->state != XenbusStateConnected ||
- (xendrv->is_ready && !xendrv->is_ready(xendev)));
+ return (xendev->state < XenbusStateConnected ||
+ (xendev->state == XenbusStateConnected &&
+ xendrv->is_ready && !xendrv->is_ready(xendev)));
}
-static int exists_disconnected_device(struct device_driver *drv)
+static int exists_connecting_device(struct device_driver *drv)
{
return bus_for_each_dev(&xenbus_frontend.bus, NULL, drv,
- is_disconnected_device);
+ is_device_connecting);
}
static int print_device_status(struct device *dev, void *data)
@@ -884,10 +885,13 @@
/* Information only: is this too noisy? */
printk(KERN_INFO "XENBUS: Device with no driver: %s\n",
xendev->nodename);
- } else if (xendev->state != XenbusStateConnected) {
+ } else if (xendev->state < XenbusStateConnected) {
+ enum xenbus_state rstate = XenbusStateUnknown;
+ if (xendev->otherend)
+ rstate = xenbus_read_driver_state(xendev->otherend);
printk(KERN_WARNING "XENBUS: Timeout connecting "
- "to device: %s (state %d)\n",
- xendev->nodename, xendev->state);
+ "to device: %s (local state %d, remote state %d)\n",
+ xendev->nodename, xendev->state, rstate);
}
return 0;
@@ -897,7 +901,7 @@
static int ready_to_wait_for_devices;
/*
- * On a 10 second timeout, wait for all devices currently configured. We need
+ * On a 5-minute timeout, wait for all devices currently configured. We need
* to do this to guarantee that the filesystems and / or network devices
* needed for boot are available, before we can allow the boot to proceed.
*
@@ -912,18 +916,30 @@
*/
static void wait_for_devices(struct xenbus_driver *xendrv)
{
- unsigned long timeout = jiffies + 10*HZ;
+ unsigned long start = jiffies;
struct device_driver *drv = xendrv ? &xendrv->driver : NULL;
+ unsigned int seconds_waited = 0;
if (!ready_to_wait_for_devices || !xen_domain())
return;
- while (exists_disconnected_device(drv)) {
- if (time_after(jiffies, timeout))
- break;
+ while (exists_connecting_device(drv)) {
+ if (time_after(jiffies, start + (seconds_waited+5)*HZ)) {
+ if (!seconds_waited)
+ printk(KERN_WARNING "XENBUS: Waiting for "
+ "devices to initialise: ");
+ seconds_waited += 5;
+ printk("%us...", 300 - seconds_waited);
+ if (seconds_waited == 300)
+ break;
+ }
+
schedule_timeout_interruptible(HZ/10);
}
+ if (seconds_waited)
+ printk("\n");
+
bus_for_each_dev(&xenbus_frontend.bus, NULL, drv,
print_device_status);
}
diff --git a/fs/binfmt_elf.c b/fs/binfmt_elf.c
index b9b3bb5..d15ea17 100644
--- a/fs/binfmt_elf.c
+++ b/fs/binfmt_elf.c
@@ -767,7 +767,7 @@
current->mm->start_stack = bprm->p;
- /* Now we do a little grungy work by mmaping the ELF image into
+ /* Now we do a little grungy work by mmapping the ELF image into
the correct location in memory. */
for(i = 0, elf_ppnt = elf_phdata;
i < loc->elf_ex.e_phnum; i++, elf_ppnt++) {
diff --git a/fs/bio.c b/fs/bio.c
index e23a63f..76e6713 100644
--- a/fs/bio.c
+++ b/fs/bio.c
@@ -272,7 +272,7 @@
* for a &struct bio to become free. If a %NULL @bs is passed in, we will
* fall back to just using @kmalloc to allocate the required memory.
*
- * Note that the caller must set ->bi_destructor on succesful return
+ * Note that the caller must set ->bi_destructor on successful return
* of a bio, to do the appropriate freeing of the bio once the reference
* count drops to zero.
**/
diff --git a/fs/btrfs/extent_map.c b/fs/btrfs/extent_map.c
index ccbdcb5..46bea0f 100644
--- a/fs/btrfs/extent_map.c
+++ b/fs/btrfs/extent_map.c
@@ -256,7 +256,7 @@
* Insert @em into @tree or perform a simple forward/backward merge with
* existing mappings. The extent_map struct passed in will be inserted
* into the tree directly, with an additional reference taken, or a
- * reference dropped if the merge attempt was sucessfull.
+ * reference dropped if the merge attempt was successfull.
*/
int add_extent_mapping(struct extent_map_tree *tree,
struct extent_map *em)
diff --git a/fs/cifs/README b/fs/cifs/README
index 79c1a93..a727b7c 100644
--- a/fs/cifs/README
+++ b/fs/cifs/README
@@ -423,7 +423,7 @@
source name to use to represent the client netbios machine
name when doing the RFC1001 netbios session initialize.
direct Do not do inode data caching on files opened on this mount.
- This precludes mmaping files on this mount. In some cases
+ This precludes mmapping files on this mount. In some cases
with fast networks and little or no caching benefits on the
client (e.g. when the application is doing large sequential
reads bigger than page size without rereading the same data)
diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h
index 5d0fde1..4b35f7e 100644
--- a/fs/cifs/cifsglob.h
+++ b/fs/cifs/cifsglob.h
@@ -39,7 +39,7 @@
/*
* MAX_REQ is the maximum number of requests that WE will send
- * on one socket concurently. It also matches the most common
+ * on one socket concurrently. It also matches the most common
* value of max multiplex returned by servers. We may
* eventually want to use the negotiated value (in case
* future servers can handle more) when we are more confident that
diff --git a/fs/cifs/cifspdu.h b/fs/cifs/cifspdu.h
index 2d07f89..3877737 100644
--- a/fs/cifs/cifspdu.h
+++ b/fs/cifs/cifspdu.h
@@ -1227,7 +1227,7 @@
/* empty wct response to setattr */
/*******************************************************/
-/* NT Transact structure defintions follow */
+/* NT Transact structure definitions follow */
/* Currently only ioctl, acl (get security descriptor) */
/* and notify are implemented */
/*******************************************************/
diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c
index cababd8..cf18ee7 100644
--- a/fs/cifs/inode.c
+++ b/fs/cifs/inode.c
@@ -914,8 +914,8 @@
/*
* If dentry->d_inode is null (usually meaning the cached dentry
* is a negative dentry) then we would attempt a standard SMB delete, but
- * if that fails we can not attempt the fall back mechanisms on EACESS
- * but will return the EACESS to the caller. Note that the VFS does not call
+ * if that fails we can not attempt the fall back mechanisms on EACCESS
+ * but will return the EACCESS to the caller. Note that the VFS does not call
* unlink on negative dentries currently.
*/
int cifs_unlink(struct inode *dir, struct dentry *dentry)
diff --git a/fs/cifs/smbdes.c b/fs/cifs/smbdes.c
index 224a1f4..b6b6dcb 100644
--- a/fs/cifs/smbdes.c
+++ b/fs/cifs/smbdes.c
@@ -371,7 +371,7 @@
smbhash(p24 + 16, c8, p21 + 14, 1);
}
-#if 0 /* currently unsued */
+#if 0 /* currently unused */
static void
D_P16(unsigned char *p14, unsigned char *in, unsigned char *out)
{
diff --git a/fs/compat_ioctl.c b/fs/compat_ioctl.c
index 229e722..2346895 100644
--- a/fs/compat_ioctl.c
+++ b/fs/compat_ioctl.c
@@ -1920,7 +1920,7 @@
#endif
#ifdef TIOCSTART
/*
- * For these two we have defintions in ioctls.h and/or termios.h on
+ * For these two we have definitions in ioctls.h and/or termios.h on
* some architectures but no actual implemention. Some applications
* like bash call them if they are defined in the headers, so we provide
* entries here to avoid syslog message spew.
diff --git a/fs/debugfs/inode.c b/fs/debugfs/inode.c
index d22438e..0d23b52 100644
--- a/fs/debugfs/inode.c
+++ b/fs/debugfs/inode.c
@@ -184,7 +184,7 @@
/**
* debugfs_create_file - create a file in the debugfs filesystem
* @name: a pointer to a string containing the name of the file to create.
- * @mode: the permission that the file should have
+ * @mode: the permission that the file should have.
* @parent: a pointer to the parent dentry for this file. This should be a
* directory dentry if set. If this paramater is NULL, then the
* file will be created in the root of the debugfs filesystem.
@@ -195,8 +195,8 @@
* this file.
*
* This is the basic "create a file" function for debugfs. It allows for a
- * wide range of flexibility in createing a file, or a directory (if you
- * want to create a directory, the debugfs_create_dir() function is
+ * wide range of flexibility in creating a file, or a directory (if you want
+ * to create a directory, the debugfs_create_dir() function is
* recommended to be used instead.)
*
* This function will return a pointer to a dentry if it succeeds. This
diff --git a/fs/dlm/config.c b/fs/dlm/config.c
index fd9859f..0df2438 100644
--- a/fs/dlm/config.c
+++ b/fs/dlm/config.c
@@ -410,10 +410,10 @@
struct dlm_comms *cms = NULL;
void *gps = NULL;
- cl = kzalloc(sizeof(struct dlm_cluster), GFP_KERNEL);
- gps = kcalloc(3, sizeof(struct config_group *), GFP_KERNEL);
- sps = kzalloc(sizeof(struct dlm_spaces), GFP_KERNEL);
- cms = kzalloc(sizeof(struct dlm_comms), GFP_KERNEL);
+ cl = kzalloc(sizeof(struct dlm_cluster), GFP_NOFS);
+ gps = kcalloc(3, sizeof(struct config_group *), GFP_NOFS);
+ sps = kzalloc(sizeof(struct dlm_spaces), GFP_NOFS);
+ cms = kzalloc(sizeof(struct dlm_comms), GFP_NOFS);
if (!cl || !gps || !sps || !cms)
goto fail;
@@ -482,9 +482,9 @@
struct dlm_nodes *nds = NULL;
void *gps = NULL;
- sp = kzalloc(sizeof(struct dlm_space), GFP_KERNEL);
- gps = kcalloc(2, sizeof(struct config_group *), GFP_KERNEL);
- nds = kzalloc(sizeof(struct dlm_nodes), GFP_KERNEL);
+ sp = kzalloc(sizeof(struct dlm_space), GFP_NOFS);
+ gps = kcalloc(2, sizeof(struct config_group *), GFP_NOFS);
+ nds = kzalloc(sizeof(struct dlm_nodes), GFP_NOFS);
if (!sp || !gps || !nds)
goto fail;
@@ -536,7 +536,7 @@
{
struct dlm_comm *cm;
- cm = kzalloc(sizeof(struct dlm_comm), GFP_KERNEL);
+ cm = kzalloc(sizeof(struct dlm_comm), GFP_NOFS);
if (!cm)
return ERR_PTR(-ENOMEM);
@@ -569,7 +569,7 @@
struct dlm_space *sp = config_item_to_space(g->cg_item.ci_parent);
struct dlm_node *nd;
- nd = kzalloc(sizeof(struct dlm_node), GFP_KERNEL);
+ nd = kzalloc(sizeof(struct dlm_node), GFP_NOFS);
if (!nd)
return ERR_PTR(-ENOMEM);
@@ -705,7 +705,7 @@
if (cm->addr_count >= DLM_MAX_ADDR_COUNT)
return -ENOSPC;
- addr = kzalloc(sizeof(*addr), GFP_KERNEL);
+ addr = kzalloc(sizeof(*addr), GFP_NOFS);
if (!addr)
return -ENOMEM;
@@ -868,7 +868,7 @@
ids_count = sp->members_count;
- ids = kcalloc(ids_count, sizeof(int), GFP_KERNEL);
+ ids = kcalloc(ids_count, sizeof(int), GFP_NOFS);
if (!ids) {
rv = -ENOMEM;
goto out;
@@ -886,7 +886,7 @@
if (!new_count)
goto out_ids;
- new = kcalloc(new_count, sizeof(int), GFP_KERNEL);
+ new = kcalloc(new_count, sizeof(int), GFP_NOFS);
if (!new) {
kfree(ids);
rv = -ENOMEM;
diff --git a/fs/dlm/debug_fs.c b/fs/dlm/debug_fs.c
index 1c8bb8c..375a235 100644
--- a/fs/dlm/debug_fs.c
+++ b/fs/dlm/debug_fs.c
@@ -404,7 +404,7 @@
if (bucket >= ls->ls_rsbtbl_size)
return NULL;
- ri = kzalloc(sizeof(struct rsbtbl_iter), GFP_KERNEL);
+ ri = kzalloc(sizeof(struct rsbtbl_iter), GFP_NOFS);
if (!ri)
return NULL;
if (n == 0)
diff --git a/fs/dlm/dir.c b/fs/dlm/dir.c
index c4dfa1d..7b84c1d 100644
--- a/fs/dlm/dir.c
+++ b/fs/dlm/dir.c
@@ -49,8 +49,7 @@
spin_unlock(&ls->ls_recover_list_lock);
if (!found)
- de = kzalloc(sizeof(struct dlm_direntry) + len,
- ls->ls_allocation);
+ de = kzalloc(sizeof(struct dlm_direntry) + len, GFP_NOFS);
return de;
}
@@ -212,7 +211,7 @@
dlm_dir_clear(ls);
- last_name = kmalloc(DLM_RESNAME_MAXLEN, ls->ls_allocation);
+ last_name = kmalloc(DLM_RESNAME_MAXLEN, GFP_NOFS);
if (!last_name)
goto out;
@@ -323,7 +322,7 @@
if (namelen > DLM_RESNAME_MAXLEN)
return -EINVAL;
- de = kzalloc(sizeof(struct dlm_direntry) + namelen, ls->ls_allocation);
+ de = kzalloc(sizeof(struct dlm_direntry) + namelen, GFP_NOFS);
if (!de)
return -ENOMEM;
diff --git a/fs/dlm/dlm_internal.h b/fs/dlm/dlm_internal.h
index d01ca0a..826d3dc 100644
--- a/fs/dlm/dlm_internal.h
+++ b/fs/dlm/dlm_internal.h
@@ -473,7 +473,6 @@
int ls_low_nodeid;
int ls_total_weight;
int *ls_node_array;
- gfp_t ls_allocation;
struct dlm_rsb ls_stub_rsb; /* for returning errors */
struct dlm_lkb ls_stub_lkb; /* for returning errors */
diff --git a/fs/dlm/lock.c b/fs/dlm/lock.c
index eb507c4..9c0c1db 100644
--- a/fs/dlm/lock.c
+++ b/fs/dlm/lock.c
@@ -2689,7 +2689,7 @@
pass into lowcomms_commit and a message buffer (mb) that we
write our data into */
- mh = dlm_lowcomms_get_buffer(to_nodeid, mb_len, ls->ls_allocation, &mb);
+ mh = dlm_lowcomms_get_buffer(to_nodeid, mb_len, GFP_NOFS, &mb);
if (!mh)
return -ENOBUFS;
@@ -4512,7 +4512,7 @@
}
if (flags & DLM_LKF_VALBLK) {
- ua->lksb.sb_lvbptr = kzalloc(DLM_USER_LVB_LEN, GFP_KERNEL);
+ ua->lksb.sb_lvbptr = kzalloc(DLM_USER_LVB_LEN, GFP_NOFS);
if (!ua->lksb.sb_lvbptr) {
kfree(ua);
__put_lkb(ls, lkb);
@@ -4582,7 +4582,7 @@
ua = lkb->lkb_ua;
if (flags & DLM_LKF_VALBLK && !ua->lksb.sb_lvbptr) {
- ua->lksb.sb_lvbptr = kzalloc(DLM_USER_LVB_LEN, GFP_KERNEL);
+ ua->lksb.sb_lvbptr = kzalloc(DLM_USER_LVB_LEN, GFP_NOFS);
if (!ua->lksb.sb_lvbptr) {
error = -ENOMEM;
goto out_put;
diff --git a/fs/dlm/lockspace.c b/fs/dlm/lockspace.c
index d489fcc..c010ecf 100644
--- a/fs/dlm/lockspace.c
+++ b/fs/dlm/lockspace.c
@@ -430,7 +430,7 @@
error = -ENOMEM;
- ls = kzalloc(sizeof(struct dlm_ls) + namelen, GFP_KERNEL);
+ ls = kzalloc(sizeof(struct dlm_ls) + namelen, GFP_NOFS);
if (!ls)
goto out;
memcpy(ls->ls_name, name, namelen);
@@ -443,11 +443,6 @@
if (flags & DLM_LSFL_TIMEWARN)
set_bit(LSFL_TIMEWARN, &ls->ls_flags);
- if (flags & DLM_LSFL_FS)
- ls->ls_allocation = GFP_NOFS;
- else
- ls->ls_allocation = GFP_KERNEL;
-
/* ls_exflags are forced to match among nodes, and we don't
need to require all nodes to have some flags set */
ls->ls_exflags = (flags & ~(DLM_LSFL_TIMEWARN | DLM_LSFL_FS |
@@ -456,7 +451,7 @@
size = dlm_config.ci_rsbtbl_size;
ls->ls_rsbtbl_size = size;
- ls->ls_rsbtbl = kmalloc(sizeof(struct dlm_rsbtable) * size, GFP_KERNEL);
+ ls->ls_rsbtbl = kmalloc(sizeof(struct dlm_rsbtable) * size, GFP_NOFS);
if (!ls->ls_rsbtbl)
goto out_lsfree;
for (i = 0; i < size; i++) {
@@ -468,7 +463,7 @@
size = dlm_config.ci_lkbtbl_size;
ls->ls_lkbtbl_size = size;
- ls->ls_lkbtbl = kmalloc(sizeof(struct dlm_lkbtable) * size, GFP_KERNEL);
+ ls->ls_lkbtbl = kmalloc(sizeof(struct dlm_lkbtable) * size, GFP_NOFS);
if (!ls->ls_lkbtbl)
goto out_rsbfree;
for (i = 0; i < size; i++) {
@@ -480,7 +475,7 @@
size = dlm_config.ci_dirtbl_size;
ls->ls_dirtbl_size = size;
- ls->ls_dirtbl = kmalloc(sizeof(struct dlm_dirtable) * size, GFP_KERNEL);
+ ls->ls_dirtbl = kmalloc(sizeof(struct dlm_dirtable) * size, GFP_NOFS);
if (!ls->ls_dirtbl)
goto out_lkbfree;
for (i = 0; i < size; i++) {
@@ -527,7 +522,7 @@
mutex_init(&ls->ls_requestqueue_mutex);
mutex_init(&ls->ls_clear_proc_locks);
- ls->ls_recover_buf = kmalloc(dlm_config.ci_buffer_size, GFP_KERNEL);
+ ls->ls_recover_buf = kmalloc(dlm_config.ci_buffer_size, GFP_NOFS);
if (!ls->ls_recover_buf)
goto out_dirfree;
diff --git a/fs/dlm/lowcomms.c b/fs/dlm/lowcomms.c
index 70736eb..52cab16 100644
--- a/fs/dlm/lowcomms.c
+++ b/fs/dlm/lowcomms.c
@@ -1060,7 +1060,7 @@
if (dlm_our_addr(&sas, i))
break;
- addr = kmalloc(sizeof(*addr), GFP_KERNEL);
+ addr = kmalloc(sizeof(*addr), GFP_NOFS);
if (!addr)
break;
memcpy(addr, &sas, sizeof(*addr));
@@ -1099,7 +1099,7 @@
struct sockaddr_storage localaddr;
struct sctp_event_subscribe subscribe;
int result = -EINVAL, num = 1, i, addr_len;
- struct connection *con = nodeid2con(0, GFP_KERNEL);
+ struct connection *con = nodeid2con(0, GFP_NOFS);
int bufsize = NEEDED_RMEM;
if (!con)
@@ -1171,7 +1171,7 @@
static int tcp_listen_for_all(void)
{
struct socket *sock = NULL;
- struct connection *con = nodeid2con(0, GFP_KERNEL);
+ struct connection *con = nodeid2con(0, GFP_NOFS);
int result = -EINVAL;
if (!con)
diff --git a/fs/dlm/member.c b/fs/dlm/member.c
index b128775..84f70bf 100644
--- a/fs/dlm/member.c
+++ b/fs/dlm/member.c
@@ -48,7 +48,7 @@
struct dlm_member *memb;
int w, error;
- memb = kzalloc(sizeof(struct dlm_member), ls->ls_allocation);
+ memb = kzalloc(sizeof(struct dlm_member), GFP_NOFS);
if (!memb)
return -ENOMEM;
@@ -143,7 +143,7 @@
ls->ls_total_weight = total;
- array = kmalloc(sizeof(int) * total, ls->ls_allocation);
+ array = kmalloc(sizeof(int) * total, GFP_NOFS);
if (!array)
return;
@@ -226,7 +226,7 @@
continue;
log_debug(ls, "new nodeid %d is a re-added member", rv->new[i]);
- memb = kzalloc(sizeof(struct dlm_member), ls->ls_allocation);
+ memb = kzalloc(sizeof(struct dlm_member), GFP_NOFS);
if (!memb)
return -ENOMEM;
memb->nodeid = rv->new[i];
@@ -341,7 +341,7 @@
int *ids = NULL, *new = NULL;
int error, ids_count = 0, new_count = 0;
- rv = kzalloc(sizeof(struct dlm_recover), ls->ls_allocation);
+ rv = kzalloc(sizeof(struct dlm_recover), GFP_NOFS);
if (!rv)
return -ENOMEM;
diff --git a/fs/dlm/memory.c b/fs/dlm/memory.c
index c1775b8..8e0d00d 100644
--- a/fs/dlm/memory.c
+++ b/fs/dlm/memory.c
@@ -39,7 +39,7 @@
{
char *p;
- p = kzalloc(ls->ls_lvblen, ls->ls_allocation);
+ p = kzalloc(ls->ls_lvblen, GFP_NOFS);
return p;
}
@@ -57,7 +57,7 @@
DLM_ASSERT(namelen <= DLM_RESNAME_MAXLEN,);
- r = kzalloc(sizeof(*r) + namelen, ls->ls_allocation);
+ r = kzalloc(sizeof(*r) + namelen, GFP_NOFS);
return r;
}
@@ -72,7 +72,7 @@
{
struct dlm_lkb *lkb;
- lkb = kmem_cache_zalloc(lkb_cache, ls->ls_allocation);
+ lkb = kmem_cache_zalloc(lkb_cache, GFP_NOFS);
return lkb;
}
diff --git a/fs/dlm/netlink.c b/fs/dlm/netlink.c
index 55ea369..052095c 100644
--- a/fs/dlm/netlink.c
+++ b/fs/dlm/netlink.c
@@ -26,7 +26,7 @@
struct sk_buff *skb;
void *data;
- skb = genlmsg_new(size, GFP_KERNEL);
+ skb = genlmsg_new(size, GFP_NOFS);
if (!skb)
return -ENOMEM;
diff --git a/fs/dlm/plock.c b/fs/dlm/plock.c
index 16f682e..b5f89ae 100644
--- a/fs/dlm/plock.c
+++ b/fs/dlm/plock.c
@@ -82,7 +82,7 @@
if (!ls)
return -EINVAL;
- xop = kzalloc(sizeof(*xop), GFP_KERNEL);
+ xop = kzalloc(sizeof(*xop), GFP_NOFS);
if (!xop) {
rv = -ENOMEM;
goto out;
@@ -143,7 +143,7 @@
}
EXPORT_SYMBOL_GPL(dlm_posix_lock);
-/* Returns failure iff a succesful lock operation should be canceled */
+/* Returns failure iff a successful lock operation should be canceled */
static int dlm_plock_callback(struct plock_op *op)
{
struct file *file;
@@ -211,7 +211,7 @@
if (!ls)
return -EINVAL;
- op = kzalloc(sizeof(*op), GFP_KERNEL);
+ op = kzalloc(sizeof(*op), GFP_NOFS);
if (!op) {
rv = -ENOMEM;
goto out;
@@ -266,7 +266,7 @@
if (!ls)
return -EINVAL;
- op = kzalloc(sizeof(*op), GFP_KERNEL);
+ op = kzalloc(sizeof(*op), GFP_NOFS);
if (!op) {
rv = -ENOMEM;
goto out;
diff --git a/fs/dlm/rcom.c b/fs/dlm/rcom.c
index 67522c2..3c83a49 100644
--- a/fs/dlm/rcom.c
+++ b/fs/dlm/rcom.c
@@ -38,7 +38,7 @@
char *mb;
int mb_len = sizeof(struct dlm_rcom) + len;
- mh = dlm_lowcomms_get_buffer(to_nodeid, mb_len, ls->ls_allocation, &mb);
+ mh = dlm_lowcomms_get_buffer(to_nodeid, mb_len, GFP_NOFS, &mb);
if (!mh) {
log_print("create_rcom to %d type %d len %d ENOBUFS",
to_nodeid, type, len);
diff --git a/fs/dlm/requestqueue.c b/fs/dlm/requestqueue.c
index 7a2307c..a44fa22 100644
--- a/fs/dlm/requestqueue.c
+++ b/fs/dlm/requestqueue.c
@@ -35,7 +35,7 @@
struct rq_entry *e;
int length = ms->m_header.h_length - sizeof(struct dlm_message);
- e = kmalloc(sizeof(struct rq_entry) + length, ls->ls_allocation);
+ e = kmalloc(sizeof(struct rq_entry) + length, GFP_NOFS);
if (!e) {
log_print("dlm_add_requestqueue: out of memory len %d", length);
return;
diff --git a/fs/dlm/user.c b/fs/dlm/user.c
index ebce994..e73a4bb 100644
--- a/fs/dlm/user.c
+++ b/fs/dlm/user.c
@@ -267,7 +267,7 @@
goto out;
}
- ua = kzalloc(sizeof(struct dlm_user_args), GFP_KERNEL);
+ ua = kzalloc(sizeof(struct dlm_user_args), GFP_NOFS);
if (!ua)
goto out;
ua->proc = proc;
@@ -307,7 +307,7 @@
if (!ls)
return -ENOENT;
- ua = kzalloc(sizeof(struct dlm_user_args), GFP_KERNEL);
+ ua = kzalloc(sizeof(struct dlm_user_args), GFP_NOFS);
if (!ua)
goto out;
ua->proc = proc;
@@ -352,7 +352,7 @@
error = -ENOMEM;
len = strlen(name) + strlen(name_prefix) + 2;
- ls->ls_device.name = kzalloc(len, GFP_KERNEL);
+ ls->ls_device.name = kzalloc(len, GFP_NOFS);
if (!ls->ls_device.name)
goto fail;
@@ -520,7 +520,7 @@
#endif
return -EINVAL;
- kbuf = kzalloc(count + 1, GFP_KERNEL);
+ kbuf = kzalloc(count + 1, GFP_NOFS);
if (!kbuf)
return -ENOMEM;
@@ -546,7 +546,7 @@
/* add 1 after namelen so that the name string is terminated */
kbuf = kzalloc(sizeof(struct dlm_write_request) + namelen + 1,
- GFP_KERNEL);
+ GFP_NOFS);
if (!kbuf) {
kfree(k32buf);
return -ENOMEM;
@@ -648,7 +648,7 @@
if (!ls)
return -ENOENT;
- proc = kzalloc(sizeof(struct dlm_user_proc), GFP_KERNEL);
+ proc = kzalloc(sizeof(struct dlm_user_proc), GFP_NOFS);
if (!proc) {
dlm_put_lockspace(ls);
return -ENOMEM;
diff --git a/fs/exofs/Kbuild b/fs/exofs/Kbuild
index cc2d22d..2d0f757 100644
--- a/fs/exofs/Kbuild
+++ b/fs/exofs/Kbuild
@@ -12,5 +12,5 @@
# Kbuild - Gets included from the Kernels Makefile and build system
#
-exofs-y := osd.o inode.o file.o symlink.o namei.o dir.o super.o
+exofs-y := ios.o inode.o file.o symlink.o namei.o dir.o super.o
obj-$(CONFIG_EXOFS_FS) += exofs.o
diff --git a/fs/exofs/common.h b/fs/exofs/common.h
index c6718e4..b1b178e 100644
--- a/fs/exofs/common.h
+++ b/fs/exofs/common.h
@@ -49,6 +49,7 @@
#define EXOFS_MIN_PID 0x10000 /* Smallest partition ID */
#define EXOFS_OBJ_OFF 0x10000 /* offset for objects */
#define EXOFS_SUPER_ID 0x10000 /* object ID for on-disk superblock */
+#define EXOFS_DEVTABLE_ID 0x10001 /* object ID for on-disk device table */
#define EXOFS_ROOT_ID 0x10002 /* object ID for root directory */
/* exofs Application specific page/attribute */
@@ -78,17 +79,67 @@
#define EXOFS_SUPER_MAGIC 0x5DF5
/*
- * The file system control block - stored in an object's data (mainly, the one
- * with ID EXOFS_SUPER_ID). This is where the in-memory superblock is stored
- * on disk. Right now it just has a magic value, which is basically a sanity
- * check on our ability to communicate with the object store.
+ * The file system control block - stored in object EXOFS_SUPER_ID's data.
+ * This is where the in-memory superblock is stored on disk.
*/
+enum {EXOFS_FSCB_VER = 1, EXOFS_DT_VER = 1};
struct exofs_fscb {
__le64 s_nextid; /* Highest object ID used */
- __le32 s_numfiles; /* Number of files on fs */
+ __le64 s_numfiles; /* Number of files on fs */
+ __le32 s_version; /* == EXOFS_FSCB_VER */
__le16 s_magic; /* Magic signature */
__le16 s_newfs; /* Non-zero if this is a new fs */
-};
+
+ /* From here on it's a static part, only written by mkexofs */
+ __le64 s_dev_table_oid; /* Resurved, not used */
+ __le64 s_dev_table_count; /* == 0 means no dev_table */
+} __packed;
+
+/*
+ * Describes the raid used in the FS. It is part of the device table.
+ * This here is taken from the pNFS-objects definition. In exofs we
+ * use one raid policy through-out the filesystem. (NOTE: the funny
+ * alignment at begining. We take care of it at exofs_device_table.
+ */
+struct exofs_dt_data_map {
+ __le32 cb_num_comps;
+ __le64 cb_stripe_unit;
+ __le32 cb_group_width;
+ __le32 cb_group_depth;
+ __le32 cb_mirror_cnt;
+ __le32 cb_raid_algorithm;
+} __packed;
+
+/*
+ * This is an osd device information descriptor. It is a single entry in
+ * the exofs device table. It describes an osd target lun which
+ * contains data belonging to this FS. (Same partition_id on all devices)
+ */
+struct exofs_dt_device_info {
+ __le32 systemid_len;
+ u8 systemid[OSD_SYSTEMID_LEN];
+ __le64 long_name_offset; /* If !0 then offset-in-file */
+ __le32 osdname_len; /* */
+ u8 osdname[44]; /* Embbeded, Ususally an asci uuid */
+} __packed;
+
+/*
+ * The EXOFS device table - stored in object EXOFS_DEVTABLE_ID's data.
+ * It contains the raid used for this multy-device FS and an array of
+ * participating devices.
+ */
+struct exofs_device_table {
+ __le32 dt_version; /* == EXOFS_DT_VER */
+ struct exofs_dt_data_map dt_data_map; /* Raid policy to use */
+
+ /* Resurved space For future use. Total includeing this:
+ * (8 * sizeof(le64))
+ */
+ __le64 __Resurved[4];
+
+ __le64 dt_num_devices; /* Array size */
+ struct exofs_dt_device_info dt_dev_table[]; /* Array of devices */
+} __packed;
/****************************************************************************
* inode-related things
@@ -155,22 +206,4 @@
(((name_len) + offsetof(struct exofs_dir_entry, name) + \
EXOFS_DIR_ROUND) & ~EXOFS_DIR_ROUND)
-/*************************
- * function declarations *
- *************************/
-/* osd.c */
-void exofs_make_credential(u8 cred_a[OSD_CAP_LEN],
- const struct osd_obj_id *obj);
-
-int exofs_check_ok_resid(struct osd_request *or, u64 *in_resid, u64 *out_resid);
-static inline int exofs_check_ok(struct osd_request *or)
-{
- return exofs_check_ok_resid(or, NULL, NULL);
-}
-int exofs_sync_op(struct osd_request *or, int timeout, u8 *cred);
-int exofs_async_op(struct osd_request *or,
- osd_req_done_fn *async_done, void *caller_context, u8 *cred);
-
-int extract_attr_from_req(struct osd_request *or, struct osd_attr *attr);
-
#endif /*ifndef __EXOFS_COM_H__*/
diff --git a/fs/exofs/exofs.h b/fs/exofs/exofs.h
index 5ec72e0..c35fd46 100644
--- a/fs/exofs/exofs.h
+++ b/fs/exofs/exofs.h
@@ -30,13 +30,17 @@
* along with exofs; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
+#ifndef __EXOFS_H__
+#define __EXOFS_H__
#include <linux/fs.h>
#include <linux/time.h>
#include "common.h"
-#ifndef __EXOFS_H__
-#define __EXOFS_H__
+/* FIXME: Remove once pnfs hits mainline
+ * #include <linux/exportfs/pnfs_osd_xdr.h>
+ */
+#include "pnfs.h"
#define EXOFS_ERR(fmt, a...) printk(KERN_ERR "exofs: " fmt, ##a)
@@ -55,7 +59,7 @@
* our extension to the in-memory superblock
*/
struct exofs_sb_info {
- struct osd_dev *s_dev; /* returned by get_osd_dev */
+ struct exofs_fscb s_fscb; /* Written often, pre-allocate*/
osd_id s_pid; /* partition ID of file system*/
int s_timeout; /* timeout for OSD operations */
uint64_t s_nextid; /* highest object ID used */
@@ -63,7 +67,11 @@
spinlock_t s_next_gen_lock; /* spinlock for gen # update */
u32 s_next_generation; /* next gen # to use */
atomic_t s_curr_pending; /* number of pending commands */
- uint8_t s_cred[OSD_CAP_LEN]; /* all-powerful credential */
+ uint8_t s_cred[OSD_CAP_LEN]; /* credential for the fscb */
+
+ struct pnfs_osd_data_map data_map; /* Default raid to use */
+ unsigned s_numdevs; /* Num of devices in array */
+ struct osd_dev *s_ods[1]; /* Variable length, minimum 1 */
};
/*
@@ -79,6 +87,50 @@
struct inode vfs_inode; /* normal in-memory inode */
};
+static inline osd_id exofs_oi_objno(struct exofs_i_info *oi)
+{
+ return oi->vfs_inode.i_ino + EXOFS_OBJ_OFF;
+}
+
+struct exofs_io_state;
+typedef void (*exofs_io_done_fn)(struct exofs_io_state *or, void *private);
+
+struct exofs_io_state {
+ struct kref kref;
+
+ void *private;
+ exofs_io_done_fn done;
+
+ struct exofs_sb_info *sbi;
+ struct osd_obj_id obj;
+ u8 *cred;
+
+ /* Global read/write IO*/
+ loff_t offset;
+ unsigned long length;
+ void *kern_buff;
+ struct bio *bio;
+
+ /* Attributes */
+ unsigned in_attr_len;
+ struct osd_attr *in_attr;
+ unsigned out_attr_len;
+ struct osd_attr *out_attr;
+
+ /* Variable array of size numdevs */
+ unsigned numdevs;
+ struct exofs_per_dev_state {
+ struct osd_request *or;
+ struct bio *bio;
+ } per_dev[];
+};
+
+static inline unsigned exofs_io_state_size(unsigned numdevs)
+{
+ return sizeof(struct exofs_io_state) +
+ sizeof(struct exofs_per_dev_state) * numdevs;
+}
+
/*
* our inode flags
*/
@@ -130,6 +182,42 @@
/*************************
* function declarations *
*************************/
+
+/* ios.c */
+void exofs_make_credential(u8 cred_a[OSD_CAP_LEN],
+ const struct osd_obj_id *obj);
+int exofs_read_kern(struct osd_dev *od, u8 *cred, struct osd_obj_id *obj,
+ u64 offset, void *p, unsigned length);
+
+int exofs_get_io_state(struct exofs_sb_info *sbi, struct exofs_io_state** ios);
+void exofs_put_io_state(struct exofs_io_state *ios);
+
+int exofs_check_io(struct exofs_io_state *ios, u64 *resid);
+
+int exofs_sbi_create(struct exofs_io_state *ios);
+int exofs_sbi_remove(struct exofs_io_state *ios);
+int exofs_sbi_write(struct exofs_io_state *ios);
+int exofs_sbi_read(struct exofs_io_state *ios);
+
+int extract_attr_from_ios(struct exofs_io_state *ios, struct osd_attr *attr);
+
+int exofs_oi_truncate(struct exofs_i_info *oi, u64 new_len);
+static inline int exofs_oi_write(struct exofs_i_info *oi,
+ struct exofs_io_state *ios)
+{
+ ios->obj.id = exofs_oi_objno(oi);
+ ios->cred = oi->i_cred;
+ return exofs_sbi_write(ios);
+}
+
+static inline int exofs_oi_read(struct exofs_i_info *oi,
+ struct exofs_io_state *ios)
+{
+ ios->obj.id = exofs_oi_objno(oi);
+ ios->cred = oi->i_cred;
+ return exofs_sbi_read(ios);
+}
+
/* inode.c */
void exofs_truncate(struct inode *inode);
int exofs_setattr(struct dentry *, struct iattr *);
@@ -169,6 +257,7 @@
/* inode.c */
extern const struct address_space_operations exofs_aops;
+extern const struct osd_attr g_attr_logical_length;
/* namei.c */
extern const struct inode_operations exofs_dir_inode_operations;
diff --git a/fs/exofs/inode.c b/fs/exofs/inode.c
index 6c10f74..698a863 100644
--- a/fs/exofs/inode.c
+++ b/fs/exofs/inode.c
@@ -37,15 +37,18 @@
#include "exofs.h"
-#ifdef CONFIG_EXOFS_DEBUG
-# define EXOFS_DEBUG_OBJ_ISIZE 1
-#endif
+#define EXOFS_DBGMSG2(M...) do {} while (0)
+
+enum { BIO_MAX_PAGES_KMALLOC =
+ (PAGE_SIZE - sizeof(struct bio)) / sizeof(struct bio_vec),
+};
struct page_collect {
struct exofs_sb_info *sbi;
struct request_queue *req_q;
struct inode *inode;
unsigned expected_pages;
+ struct exofs_io_state *ios;
struct bio *bio;
unsigned nr_pages;
@@ -54,22 +57,23 @@
};
static void _pcol_init(struct page_collect *pcol, unsigned expected_pages,
- struct inode *inode)
+ struct inode *inode)
{
struct exofs_sb_info *sbi = inode->i_sb->s_fs_info;
pcol->sbi = sbi;
- pcol->req_q = osd_request_queue(sbi->s_dev);
+ /* Create master bios on first Q, later on cloning, each clone will be
+ * allocated on it's destination Q
+ */
+ pcol->req_q = osd_request_queue(sbi->s_ods[0]);
pcol->inode = inode;
pcol->expected_pages = expected_pages;
+ pcol->ios = NULL;
pcol->bio = NULL;
pcol->nr_pages = 0;
pcol->length = 0;
pcol->pg_first = -1;
-
- EXOFS_DBGMSG("_pcol_init ino=0x%lx expected_pages=%u\n", inode->i_ino,
- expected_pages);
}
static void _pcol_reset(struct page_collect *pcol)
@@ -80,35 +84,49 @@
pcol->nr_pages = 0;
pcol->length = 0;
pcol->pg_first = -1;
- EXOFS_DBGMSG("_pcol_reset ino=0x%lx expected_pages=%u\n",
- pcol->inode->i_ino, pcol->expected_pages);
+ pcol->ios = NULL;
/* this is probably the end of the loop but in writes
* it might not end here. don't be left with nothing
*/
if (!pcol->expected_pages)
- pcol->expected_pages = 128;
+ pcol->expected_pages = BIO_MAX_PAGES_KMALLOC;
}
static int pcol_try_alloc(struct page_collect *pcol)
{
- int pages = min_t(unsigned, pcol->expected_pages, BIO_MAX_PAGES);
+ int pages = min_t(unsigned, pcol->expected_pages,
+ BIO_MAX_PAGES_KMALLOC);
+
+ if (!pcol->ios) { /* First time allocate io_state */
+ int ret = exofs_get_io_state(pcol->sbi, &pcol->ios);
+
+ if (ret)
+ return ret;
+ }
for (; pages; pages >>= 1) {
- pcol->bio = bio_alloc(GFP_KERNEL, pages);
+ pcol->bio = bio_kmalloc(GFP_KERNEL, pages);
if (likely(pcol->bio))
return 0;
}
- EXOFS_ERR("Failed to kcalloc expected_pages=%u\n",
+ EXOFS_ERR("Failed to bio_kmalloc expected_pages=%u\n",
pcol->expected_pages);
return -ENOMEM;
}
static void pcol_free(struct page_collect *pcol)
{
- bio_put(pcol->bio);
- pcol->bio = NULL;
+ if (pcol->bio) {
+ bio_put(pcol->bio);
+ pcol->bio = NULL;
+ }
+
+ if (pcol->ios) {
+ exofs_put_io_state(pcol->ios);
+ pcol->ios = NULL;
+ }
}
static int pcol_add_page(struct page_collect *pcol, struct page *page,
@@ -161,22 +179,17 @@
/* Called at the end of reads, to optionally unlock pages and update their
* status.
*/
-static int __readpages_done(struct osd_request *or, struct page_collect *pcol,
- bool do_unlock)
+static int __readpages_done(struct page_collect *pcol, bool do_unlock)
{
struct bio_vec *bvec;
int i;
u64 resid;
u64 good_bytes;
u64 length = 0;
- int ret = exofs_check_ok_resid(or, &resid, NULL);
-
- osd_end_request(or);
+ int ret = exofs_check_io(pcol->ios, &resid);
if (likely(!ret))
good_bytes = pcol->length;
- else if (!resid)
- good_bytes = 0;
else
good_bytes = pcol->length - resid;
@@ -198,7 +211,7 @@
else
page_stat = ret;
- EXOFS_DBGMSG(" readpages_done(0x%lx, 0x%lx) %s\n",
+ EXOFS_DBGMSG2(" readpages_done(0x%lx, 0x%lx) %s\n",
inode->i_ino, page->index,
page_stat ? "bad_bytes" : "good_bytes");
@@ -214,13 +227,13 @@
}
/* callback of async reads */
-static void readpages_done(struct osd_request *or, void *p)
+static void readpages_done(struct exofs_io_state *ios, void *p)
{
struct page_collect *pcol = p;
- __readpages_done(or, pcol, true);
+ __readpages_done(pcol, true);
atomic_dec(&pcol->sbi->s_curr_pending);
- kfree(p);
+ kfree(pcol);
}
static void _unlock_pcol_pages(struct page_collect *pcol, int ret, int rw)
@@ -238,17 +251,13 @@
unlock_page(page);
}
- pcol_free(pcol);
}
static int read_exec(struct page_collect *pcol, bool is_sync)
{
struct exofs_i_info *oi = exofs_i(pcol->inode);
- struct osd_obj_id obj = {pcol->sbi->s_pid,
- pcol->inode->i_ino + EXOFS_OBJ_OFF};
- struct osd_request *or = NULL;
+ struct exofs_io_state *ios = pcol->ios;
struct page_collect *pcol_copy = NULL;
- loff_t i_start = pcol->pg_first << PAGE_CACHE_SHIFT;
int ret;
if (!pcol->bio)
@@ -257,17 +266,13 @@
/* see comment in _readpage() about sync reads */
WARN_ON(is_sync && (pcol->nr_pages != 1));
- or = osd_start_request(pcol->sbi->s_dev, GFP_KERNEL);
- if (unlikely(!or)) {
- ret = -ENOMEM;
- goto err;
- }
-
- osd_req_read(or, &obj, i_start, pcol->bio, pcol->length);
+ ios->bio = pcol->bio;
+ ios->length = pcol->length;
+ ios->offset = pcol->pg_first << PAGE_CACHE_SHIFT;
if (is_sync) {
- exofs_sync_op(or, pcol->sbi->s_timeout, oi->i_cred);
- return __readpages_done(or, pcol, false);
+ exofs_oi_read(oi, pcol->ios);
+ return __readpages_done(pcol, false);
}
pcol_copy = kmalloc(sizeof(*pcol_copy), GFP_KERNEL);
@@ -277,14 +282,16 @@
}
*pcol_copy = *pcol;
- ret = exofs_async_op(or, readpages_done, pcol_copy, oi->i_cred);
+ ios->done = readpages_done;
+ ios->private = pcol_copy;
+ ret = exofs_oi_read(oi, ios);
if (unlikely(ret))
goto err;
atomic_inc(&pcol->sbi->s_curr_pending);
EXOFS_DBGMSG("read_exec obj=0x%llx start=0x%llx length=0x%lx\n",
- obj.id, _LLU(i_start), pcol->length);
+ ios->obj.id, _LLU(ios->offset), pcol->length);
/* pages ownership was passed to pcol_copy */
_pcol_reset(pcol);
@@ -293,12 +300,10 @@
err:
if (!is_sync)
_unlock_pcol_pages(pcol, ret, READ);
- else /* Pages unlocked by caller in sync mode only free bio */
- pcol_free(pcol);
+
+ pcol_free(pcol);
kfree(pcol_copy);
- if (or)
- osd_end_request(or);
return ret;
}
@@ -370,12 +375,12 @@
if (len != PAGE_CACHE_SIZE)
zero_user(page, len, PAGE_CACHE_SIZE - len);
- EXOFS_DBGMSG(" readpage_strip(0x%lx, 0x%lx) len=0x%zx\n",
+ EXOFS_DBGMSG2(" readpage_strip(0x%lx, 0x%lx) len=0x%zx\n",
inode->i_ino, page->index, len);
ret = pcol_add_page(pcol, page, len);
if (ret) {
- EXOFS_DBGMSG("Failed pcol_add_page pages[i]=%p "
+ EXOFS_DBGMSG2("Failed pcol_add_page pages[i]=%p "
"this_len=0x%zx nr_pages=%u length=0x%lx\n",
page, len, pcol->nr_pages, pcol->length);
@@ -419,9 +424,8 @@
_pcol_init(&pcol, 1, page->mapping->host);
- /* readpage_strip might call read_exec(,async) inside at several places
- * but this is safe for is_async=0 since read_exec will not do anything
- * when we have a single page.
+ /* readpage_strip might call read_exec(,is_sync==false) at several
+ * places but not if we have a single page.
*/
ret = readpage_strip(&pcol, page);
if (ret) {
@@ -440,8 +444,8 @@
return _readpage(page, false);
}
-/* Callback for osd_write. All writes are asynchronouse */
-static void writepages_done(struct osd_request *or, void *p)
+/* Callback for osd_write. All writes are asynchronous */
+static void writepages_done(struct exofs_io_state *ios, void *p)
{
struct page_collect *pcol = p;
struct bio_vec *bvec;
@@ -449,16 +453,12 @@
u64 resid;
u64 good_bytes;
u64 length = 0;
+ int ret = exofs_check_io(ios, &resid);
- int ret = exofs_check_ok_resid(or, NULL, &resid);
-
- osd_end_request(or);
atomic_dec(&pcol->sbi->s_curr_pending);
if (likely(!ret))
good_bytes = pcol->length;
- else if (!resid)
- good_bytes = 0;
else
good_bytes = pcol->length - resid;
@@ -482,7 +482,7 @@
update_write_page(page, page_stat);
unlock_page(page);
- EXOFS_DBGMSG(" writepages_done(0x%lx, 0x%lx) status=%d\n",
+ EXOFS_DBGMSG2(" writepages_done(0x%lx, 0x%lx) status=%d\n",
inode->i_ino, page->index, page_stat);
length += bvec->bv_len;
@@ -496,23 +496,13 @@
static int write_exec(struct page_collect *pcol)
{
struct exofs_i_info *oi = exofs_i(pcol->inode);
- struct osd_obj_id obj = {pcol->sbi->s_pid,
- pcol->inode->i_ino + EXOFS_OBJ_OFF};
- struct osd_request *or = NULL;
+ struct exofs_io_state *ios = pcol->ios;
struct page_collect *pcol_copy = NULL;
- loff_t i_start = pcol->pg_first << PAGE_CACHE_SHIFT;
int ret;
if (!pcol->bio)
return 0;
- or = osd_start_request(pcol->sbi->s_dev, GFP_KERNEL);
- if (unlikely(!or)) {
- EXOFS_ERR("write_exec: Faild to osd_start_request()\n");
- ret = -ENOMEM;
- goto err;
- }
-
pcol_copy = kmalloc(sizeof(*pcol_copy), GFP_KERNEL);
if (!pcol_copy) {
EXOFS_ERR("write_exec: Faild to kmalloc(pcol)\n");
@@ -523,16 +513,22 @@
*pcol_copy = *pcol;
pcol_copy->bio->bi_rw |= (1 << BIO_RW); /* FIXME: bio_set_dir() */
- osd_req_write(or, &obj, i_start, pcol_copy->bio, pcol_copy->length);
- ret = exofs_async_op(or, writepages_done, pcol_copy, oi->i_cred);
+
+ ios->bio = pcol_copy->bio;
+ ios->offset = pcol_copy->pg_first << PAGE_CACHE_SHIFT;
+ ios->length = pcol_copy->length;
+ ios->done = writepages_done;
+ ios->private = pcol_copy;
+
+ ret = exofs_oi_write(oi, ios);
if (unlikely(ret)) {
- EXOFS_ERR("write_exec: exofs_async_op() Faild\n");
+ EXOFS_ERR("write_exec: exofs_oi_write() Faild\n");
goto err;
}
atomic_inc(&pcol->sbi->s_curr_pending);
EXOFS_DBGMSG("write_exec(0x%lx, 0x%llx) start=0x%llx length=0x%lx\n",
- pcol->inode->i_ino, pcol->pg_first, _LLU(i_start),
+ pcol->inode->i_ino, pcol->pg_first, _LLU(ios->offset),
pcol->length);
/* pages ownership was passed to pcol_copy */
_pcol_reset(pcol);
@@ -540,9 +536,9 @@
err:
_unlock_pcol_pages(pcol, ret, WRITE);
+ pcol_free(pcol);
kfree(pcol_copy);
- if (or)
- osd_end_request(or);
+
return ret;
}
@@ -586,6 +582,9 @@
if (PageError(page))
ClearPageError(page);
unlock_page(page);
+ EXOFS_DBGMSG("writepage_strip(0x%lx, 0x%lx) "
+ "outside the limits\n",
+ inode->i_ino, page->index);
return 0;
}
}
@@ -600,6 +599,9 @@
ret = write_exec(pcol);
if (unlikely(ret))
goto fail;
+
+ EXOFS_DBGMSG("writepage_strip(0x%lx, 0x%lx) Discontinuity\n",
+ inode->i_ino, page->index);
goto try_again;
}
@@ -609,7 +611,7 @@
goto fail;
}
- EXOFS_DBGMSG(" writepage_strip(0x%lx, 0x%lx) len=0x%zx\n",
+ EXOFS_DBGMSG2(" writepage_strip(0x%lx, 0x%lx) len=0x%zx\n",
inode->i_ino, page->index, len);
ret = pcol_add_page(pcol, page, len);
@@ -634,6 +636,8 @@
return 0;
fail:
+ EXOFS_DBGMSG("Error: writepage_strip(0x%lx, 0x%lx)=>%d\n",
+ inode->i_ino, page->index, ret);
set_bit(AS_EIO, &page->mapping->flags);
unlock_page(page);
return ret;
@@ -652,14 +656,17 @@
wbc->range_end >> PAGE_CACHE_SHIFT;
if (start || end)
- expected_pages = min(end - start + 1, 32L);
+ expected_pages = end - start + 1;
else
expected_pages = mapping->nrpages;
- EXOFS_DBGMSG("inode(0x%lx) wbc->start=0x%llx wbc->end=0x%llx"
- " m->nrpages=%lu start=0x%lx end=0x%lx\n",
+ if (expected_pages < 32L)
+ expected_pages = 32L;
+
+ EXOFS_DBGMSG("inode(0x%lx) wbc->start=0x%llx wbc->end=0x%llx "
+ "nrpages=%lu start=0x%lx end=0x%lx expected_pages=%ld\n",
mapping->host->i_ino, wbc->range_start, wbc->range_end,
- mapping->nrpages, start, end);
+ mapping->nrpages, start, end, expected_pages);
_pcol_init(&pcol, expected_pages, mapping->host);
@@ -771,19 +778,28 @@
const struct osd_attr g_attr_logical_length = ATTR_DEF(
OSD_APAGE_OBJECT_INFORMATION, OSD_ATTR_OI_LOGICAL_LENGTH, 8);
+static int _do_truncate(struct inode *inode)
+{
+ struct exofs_i_info *oi = exofs_i(inode);
+ loff_t isize = i_size_read(inode);
+ int ret;
+
+ inode->i_mtime = inode->i_ctime = CURRENT_TIME;
+
+ nobh_truncate_page(inode->i_mapping, isize, exofs_get_block);
+
+ ret = exofs_oi_truncate(oi, (u64)isize);
+ EXOFS_DBGMSG("(0x%lx) size=0x%llx\n", inode->i_ino, isize);
+ return ret;
+}
+
/*
* Truncate a file to the specified size - all we have to do is set the size
* attribute. We make sure the object exists first.
*/
void exofs_truncate(struct inode *inode)
{
- struct exofs_sb_info *sbi = inode->i_sb->s_fs_info;
struct exofs_i_info *oi = exofs_i(inode);
- struct osd_obj_id obj = {sbi->s_pid, inode->i_ino + EXOFS_OBJ_OFF};
- struct osd_request *or;
- struct osd_attr attr;
- loff_t isize = i_size_read(inode);
- __be64 newsize;
int ret;
if (!(S_ISREG(inode->i_mode) || S_ISDIR(inode->i_mode)
@@ -793,22 +809,6 @@
return;
if (IS_APPEND(inode) || IS_IMMUTABLE(inode))
return;
- inode->i_mtime = inode->i_ctime = CURRENT_TIME;
-
- nobh_truncate_page(inode->i_mapping, isize, exofs_get_block);
-
- or = osd_start_request(sbi->s_dev, GFP_KERNEL);
- if (unlikely(!or)) {
- EXOFS_ERR("ERROR: exofs_truncate: osd_start_request failed\n");
- goto fail;
- }
-
- osd_req_set_attributes(or, &obj);
-
- newsize = cpu_to_be64((u64)isize);
- attr = g_attr_logical_length;
- attr.val_ptr = &newsize;
- osd_req_add_set_attr_list(or, &attr, 1);
/* if we are about to truncate an object, and it hasn't been
* created yet, wait
@@ -816,8 +816,7 @@
if (unlikely(wait_obj_created(oi)))
goto fail;
- ret = exofs_sync_op(or, sbi->s_timeout, oi->i_cred);
- osd_end_request(or);
+ ret = _do_truncate(inode);
if (ret)
goto fail;
@@ -847,65 +846,62 @@
/*
* Read an inode from the OSD, and return it as is. We also return the size
- * attribute in the 'sanity' argument if we got compiled with debugging turned
- * on.
+ * attribute in the 'obj_size' argument.
*/
static int exofs_get_inode(struct super_block *sb, struct exofs_i_info *oi,
- struct exofs_fcb *inode, uint64_t *sanity)
+ struct exofs_fcb *inode, uint64_t *obj_size)
{
struct exofs_sb_info *sbi = sb->s_fs_info;
- struct osd_request *or;
- struct osd_attr attr;
- struct osd_obj_id obj = {sbi->s_pid,
- oi->vfs_inode.i_ino + EXOFS_OBJ_OFF};
+ struct osd_attr attrs[2];
+ struct exofs_io_state *ios;
int ret;
- exofs_make_credential(oi->i_cred, &obj);
-
- or = osd_start_request(sbi->s_dev, GFP_KERNEL);
- if (unlikely(!or)) {
- EXOFS_ERR("exofs_get_inode: osd_start_request failed.\n");
- return -ENOMEM;
+ *obj_size = ~0;
+ ret = exofs_get_io_state(sbi, &ios);
+ if (unlikely(ret)) {
+ EXOFS_ERR("%s: exofs_get_io_state failed.\n", __func__);
+ return ret;
}
- osd_req_get_attributes(or, &obj);
- /* we need the inode attribute */
- osd_req_add_get_attr_list(or, &g_attr_inode_data, 1);
+ ios->obj.id = exofs_oi_objno(oi);
+ exofs_make_credential(oi->i_cred, &ios->obj);
+ ios->cred = oi->i_cred;
-#ifdef EXOFS_DEBUG_OBJ_ISIZE
- /* we get the size attributes to do a sanity check */
- osd_req_add_get_attr_list(or, &g_attr_logical_length, 1);
-#endif
+ attrs[0] = g_attr_inode_data;
+ attrs[1] = g_attr_logical_length;
+ ios->in_attr = attrs;
+ ios->in_attr_len = ARRAY_SIZE(attrs);
- ret = exofs_sync_op(or, sbi->s_timeout, oi->i_cred);
+ ret = exofs_sbi_read(ios);
if (ret)
goto out;
- attr = g_attr_inode_data;
- ret = extract_attr_from_req(or, &attr);
+ ret = extract_attr_from_ios(ios, &attrs[0]);
if (ret) {
- EXOFS_ERR("exofs_get_inode: extract_attr_from_req failed\n");
+ EXOFS_ERR("%s: extract_attr of inode_data failed\n", __func__);
goto out;
}
+ WARN_ON(attrs[0].len != EXOFS_INO_ATTR_SIZE);
+ memcpy(inode, attrs[0].val_ptr, EXOFS_INO_ATTR_SIZE);
- WARN_ON(attr.len != EXOFS_INO_ATTR_SIZE);
- memcpy(inode, attr.val_ptr, EXOFS_INO_ATTR_SIZE);
-
-#ifdef EXOFS_DEBUG_OBJ_ISIZE
- attr = g_attr_logical_length;
- ret = extract_attr_from_req(or, &attr);
+ ret = extract_attr_from_ios(ios, &attrs[1]);
if (ret) {
- EXOFS_ERR("ERROR: extract attr from or failed\n");
+ EXOFS_ERR("%s: extract_attr of logical_length failed\n",
+ __func__);
goto out;
}
- *sanity = get_unaligned_be64(attr.val_ptr);
-#endif
+ *obj_size = get_unaligned_be64(attrs[1].val_ptr);
out:
- osd_end_request(or);
+ exofs_put_io_state(ios);
return ret;
}
+static void __oi_init(struct exofs_i_info *oi)
+{
+ init_waitqueue_head(&oi->i_wq);
+ oi->i_flags = 0;
+}
/*
* Fill in an inode read from the OSD and set it up for use
*/
@@ -914,7 +910,7 @@
struct exofs_i_info *oi;
struct exofs_fcb fcb;
struct inode *inode;
- uint64_t uninitialized_var(sanity);
+ uint64_t obj_size;
int ret;
inode = iget_locked(sb, ino);
@@ -923,13 +919,13 @@
if (!(inode->i_state & I_NEW))
return inode;
oi = exofs_i(inode);
+ __oi_init(oi);
/* read the inode from the osd */
- ret = exofs_get_inode(sb, oi, &fcb, &sanity);
+ ret = exofs_get_inode(sb, oi, &fcb, &obj_size);
if (ret)
goto bad_inode;
- init_waitqueue_head(&oi->i_wq);
set_obj_created(oi);
/* copy stuff from on-disk struct to in-memory struct */
@@ -947,14 +943,12 @@
inode->i_blkbits = EXOFS_BLKSHIFT;
inode->i_generation = le32_to_cpu(fcb.i_generation);
-#ifdef EXOFS_DEBUG_OBJ_ISIZE
- if ((inode->i_size != sanity) &&
+ if ((inode->i_size != obj_size) &&
(!exofs_inode_is_fast_symlink(inode))) {
- EXOFS_ERR("WARNING: Size of object from inode and "
- "attributes differ (%lld != %llu)\n",
- inode->i_size, _LLU(sanity));
+ EXOFS_ERR("WARNING: Size of inode=%llu != object=%llu\n",
+ inode->i_size, _LLU(obj_size));
+ /* FIXME: call exofs_inode_recovery() */
}
-#endif
oi->i_dir_start_lookup = 0;
@@ -1020,23 +1014,30 @@
* set the obj_created flag so that other methods know that the object exists on
* the OSD.
*/
-static void create_done(struct osd_request *or, void *p)
+static void create_done(struct exofs_io_state *ios, void *p)
{
struct inode *inode = p;
struct exofs_i_info *oi = exofs_i(inode);
struct exofs_sb_info *sbi = inode->i_sb->s_fs_info;
int ret;
- ret = exofs_check_ok(or);
- osd_end_request(or);
+ ret = exofs_check_io(ios, NULL);
+ exofs_put_io_state(ios);
+
atomic_dec(&sbi->s_curr_pending);
if (unlikely(ret)) {
EXOFS_ERR("object=0x%llx creation faild in pid=0x%llx",
- _LLU(sbi->s_pid), _LLU(inode->i_ino + EXOFS_OBJ_OFF));
- make_bad_inode(inode);
- } else
- set_obj_created(oi);
+ _LLU(exofs_oi_objno(oi)), _LLU(sbi->s_pid));
+ /*TODO: When FS is corrupted creation can fail, object already
+ * exist. Get rid of this asynchronous creation, if exist
+ * increment the obj counter and try the next object. Until we
+ * succeed. All these dangling objects will be made into lost
+ * files by chkfs.exofs
+ */
+ }
+
+ set_obj_created(oi);
atomic_dec(&inode->i_count);
wake_up(&oi->i_wq);
@@ -1051,8 +1052,7 @@
struct inode *inode;
struct exofs_i_info *oi;
struct exofs_sb_info *sbi;
- struct osd_request *or;
- struct osd_obj_id obj;
+ struct exofs_io_state *ios;
int ret;
sb = dir->i_sb;
@@ -1061,8 +1061,8 @@
return ERR_PTR(-ENOMEM);
oi = exofs_i(inode);
+ __oi_init(oi);
- init_waitqueue_head(&oi->i_wq);
set_obj_2bcreated(oi);
sbi = sb->s_fs_info;
@@ -1089,28 +1089,28 @@
mark_inode_dirty(inode);
- obj.partition = sbi->s_pid;
- obj.id = inode->i_ino + EXOFS_OBJ_OFF;
- exofs_make_credential(oi->i_cred, &obj);
-
- or = osd_start_request(sbi->s_dev, GFP_KERNEL);
- if (unlikely(!or)) {
- EXOFS_ERR("exofs_new_inode: osd_start_request failed\n");
- return ERR_PTR(-ENOMEM);
+ ret = exofs_get_io_state(sbi, &ios);
+ if (unlikely(ret)) {
+ EXOFS_ERR("exofs_new_inode: exofs_get_io_state failed\n");
+ return ERR_PTR(ret);
}
- osd_req_create_object(or, &obj);
+ ios->obj.id = exofs_oi_objno(oi);
+ exofs_make_credential(oi->i_cred, &ios->obj);
/* increment the refcount so that the inode will still be around when we
* reach the callback
*/
atomic_inc(&inode->i_count);
- ret = exofs_async_op(or, create_done, inode, oi->i_cred);
+ ios->done = create_done;
+ ios->private = inode;
+ ios->cred = oi->i_cred;
+ ret = exofs_sbi_create(ios);
if (ret) {
atomic_dec(&inode->i_count);
- osd_end_request(or);
- return ERR_PTR(-EIO);
+ exofs_put_io_state(ios);
+ return ERR_PTR(ret);
}
atomic_inc(&sbi->s_curr_pending);
@@ -1128,11 +1128,11 @@
/*
* Callback function from exofs_update_inode().
*/
-static void updatei_done(struct osd_request *or, void *p)
+static void updatei_done(struct exofs_io_state *ios, void *p)
{
struct updatei_args *args = p;
- osd_end_request(or);
+ exofs_put_io_state(ios);
atomic_dec(&args->sbi->s_curr_pending);
@@ -1148,8 +1148,7 @@
struct exofs_i_info *oi = exofs_i(inode);
struct super_block *sb = inode->i_sb;
struct exofs_sb_info *sbi = sb->s_fs_info;
- struct osd_obj_id obj = {sbi->s_pid, inode->i_ino + EXOFS_OBJ_OFF};
- struct osd_request *or;
+ struct exofs_io_state *ios;
struct osd_attr attr;
struct exofs_fcb *fcb;
struct updatei_args *args;
@@ -1186,18 +1185,16 @@
} else
memcpy(fcb->i_data, oi->i_data, sizeof(fcb->i_data));
- or = osd_start_request(sbi->s_dev, GFP_KERNEL);
- if (unlikely(!or)) {
- EXOFS_ERR("exofs_update_inode: osd_start_request failed.\n");
- ret = -ENOMEM;
+ ret = exofs_get_io_state(sbi, &ios);
+ if (unlikely(ret)) {
+ EXOFS_ERR("%s: exofs_get_io_state failed.\n", __func__);
goto free_args;
}
- osd_req_set_attributes(or, &obj);
-
attr = g_attr_inode_data;
attr.val_ptr = fcb;
- osd_req_add_set_attr_list(or, &attr, 1);
+ ios->out_attr_len = 1;
+ ios->out_attr = &attr;
if (!obj_created(oi)) {
EXOFS_DBGMSG("!obj_created\n");
@@ -1206,22 +1203,19 @@
EXOFS_DBGMSG("wait_event done\n");
}
- if (do_sync) {
- ret = exofs_sync_op(or, sbi->s_timeout, oi->i_cred);
- osd_end_request(or);
- goto free_args;
- } else {
+ if (!do_sync) {
args->sbi = sbi;
+ ios->done = updatei_done;
+ ios->private = args;
+ }
- ret = exofs_async_op(or, updatei_done, args, oi->i_cred);
- if (ret) {
- osd_end_request(or);
- goto free_args;
- }
+ ret = exofs_oi_write(oi, ios);
+ if (!do_sync && !ret) {
atomic_inc(&sbi->s_curr_pending);
goto out; /* deallocation in updatei_done */
}
+ exofs_put_io_state(ios);
free_args:
kfree(args);
out:
@@ -1238,11 +1232,12 @@
* Callback function from exofs_delete_inode() - don't have much cleaning up to
* do.
*/
-static void delete_done(struct osd_request *or, void *p)
+static void delete_done(struct exofs_io_state *ios, void *p)
{
- struct exofs_sb_info *sbi;
- osd_end_request(or);
- sbi = p;
+ struct exofs_sb_info *sbi = p;
+
+ exofs_put_io_state(ios);
+
atomic_dec(&sbi->s_curr_pending);
}
@@ -1256,8 +1251,7 @@
struct exofs_i_info *oi = exofs_i(inode);
struct super_block *sb = inode->i_sb;
struct exofs_sb_info *sbi = sb->s_fs_info;
- struct osd_obj_id obj = {sbi->s_pid, inode->i_ino + EXOFS_OBJ_OFF};
- struct osd_request *or;
+ struct exofs_io_state *ios;
int ret;
truncate_inode_pages(&inode->i_data, 0);
@@ -1274,25 +1268,26 @@
clear_inode(inode);
- or = osd_start_request(sbi->s_dev, GFP_KERNEL);
- if (unlikely(!or)) {
- EXOFS_ERR("exofs_delete_inode: osd_start_request failed\n");
+ ret = exofs_get_io_state(sbi, &ios);
+ if (unlikely(ret)) {
+ EXOFS_ERR("%s: exofs_get_io_state failed\n", __func__);
return;
}
- osd_req_remove_object(or, &obj);
-
/* if we are deleting an obj that hasn't been created yet, wait */
if (!obj_created(oi)) {
BUG_ON(!obj_2bcreated(oi));
wait_event(oi->i_wq, obj_created(oi));
}
- ret = exofs_async_op(or, delete_done, sbi, oi->i_cred);
+ ios->obj.id = exofs_oi_objno(oi);
+ ios->done = delete_done;
+ ios->private = sbi;
+ ios->cred = oi->i_cred;
+ ret = exofs_sbi_remove(ios);
if (ret) {
- EXOFS_ERR(
- "ERROR: @exofs_delete_inode exofs_async_op failed\n");
- osd_end_request(or);
+ EXOFS_ERR("%s: exofs_sbi_remove failed\n", __func__);
+ exofs_put_io_state(ios);
return;
}
atomic_inc(&sbi->s_curr_pending);
diff --git a/fs/exofs/ios.c b/fs/exofs/ios.c
new file mode 100644
index 0000000..5bad01f
--- /dev/null
+++ b/fs/exofs/ios.c
@@ -0,0 +1,421 @@
+/*
+ * Copyright (C) 2005, 2006
+ * Avishay Traeger (avishay@gmail.com)
+ * Copyright (C) 2008, 2009
+ * Boaz Harrosh <bharrosh@panasas.com>
+ *
+ * This file is part of exofs.
+ *
+ * exofs is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation. Since it is based on ext2, and the only
+ * valid version of GPL for the Linux kernel is version 2, the only valid
+ * version of GPL for exofs is version 2.
+ *
+ * exofs is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with exofs; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <scsi/scsi_device.h>
+
+#include "exofs.h"
+
+void exofs_make_credential(u8 cred_a[OSD_CAP_LEN], const struct osd_obj_id *obj)
+{
+ osd_sec_init_nosec_doall_caps(cred_a, obj, false, true);
+}
+
+int exofs_read_kern(struct osd_dev *od, u8 *cred, struct osd_obj_id *obj,
+ u64 offset, void *p, unsigned length)
+{
+ struct osd_request *or = osd_start_request(od, GFP_KERNEL);
+/* struct osd_sense_info osi = {.key = 0};*/
+ int ret;
+
+ if (unlikely(!or)) {
+ EXOFS_DBGMSG("%s: osd_start_request failed.\n", __func__);
+ return -ENOMEM;
+ }
+ ret = osd_req_read_kern(or, obj, offset, p, length);
+ if (unlikely(ret)) {
+ EXOFS_DBGMSG("%s: osd_req_read_kern failed.\n", __func__);
+ goto out;
+ }
+
+ ret = osd_finalize_request(or, 0, cred, NULL);
+ if (unlikely(ret)) {
+ EXOFS_DBGMSG("Faild to osd_finalize_request() => %d\n", ret);
+ goto out;
+ }
+
+ ret = osd_execute_request(or);
+ if (unlikely(ret))
+ EXOFS_DBGMSG("osd_execute_request() => %d\n", ret);
+ /* osd_req_decode_sense(or, ret); */
+
+out:
+ osd_end_request(or);
+ return ret;
+}
+
+int exofs_get_io_state(struct exofs_sb_info *sbi, struct exofs_io_state** pios)
+{
+ struct exofs_io_state *ios;
+
+ /*TODO: Maybe use kmem_cach per sbi of size
+ * exofs_io_state_size(sbi->s_numdevs)
+ */
+ ios = kzalloc(exofs_io_state_size(sbi->s_numdevs), GFP_KERNEL);
+ if (unlikely(!ios)) {
+ *pios = NULL;
+ return -ENOMEM;
+ }
+
+ ios->sbi = sbi;
+ ios->obj.partition = sbi->s_pid;
+ *pios = ios;
+ return 0;
+}
+
+void exofs_put_io_state(struct exofs_io_state *ios)
+{
+ if (ios) {
+ unsigned i;
+
+ for (i = 0; i < ios->numdevs; i++) {
+ struct exofs_per_dev_state *per_dev = &ios->per_dev[i];
+
+ if (per_dev->or)
+ osd_end_request(per_dev->or);
+ if (per_dev->bio)
+ bio_put(per_dev->bio);
+ }
+
+ kfree(ios);
+ }
+}
+
+static void _sync_done(struct exofs_io_state *ios, void *p)
+{
+ struct completion *waiting = p;
+
+ complete(waiting);
+}
+
+static void _last_io(struct kref *kref)
+{
+ struct exofs_io_state *ios = container_of(
+ kref, struct exofs_io_state, kref);
+
+ ios->done(ios, ios->private);
+}
+
+static void _done_io(struct osd_request *or, void *p)
+{
+ struct exofs_io_state *ios = p;
+
+ kref_put(&ios->kref, _last_io);
+}
+
+static int exofs_io_execute(struct exofs_io_state *ios)
+{
+ DECLARE_COMPLETION_ONSTACK(wait);
+ bool sync = (ios->done == NULL);
+ int i, ret;
+
+ if (sync) {
+ ios->done = _sync_done;
+ ios->private = &wait;
+ }
+
+ for (i = 0; i < ios->numdevs; i++) {
+ struct osd_request *or = ios->per_dev[i].or;
+ if (unlikely(!or))
+ continue;
+
+ ret = osd_finalize_request(or, 0, ios->cred, NULL);
+ if (unlikely(ret)) {
+ EXOFS_DBGMSG("Faild to osd_finalize_request() => %d\n",
+ ret);
+ return ret;
+ }
+ }
+
+ kref_init(&ios->kref);
+
+ for (i = 0; i < ios->numdevs; i++) {
+ struct osd_request *or = ios->per_dev[i].or;
+ if (unlikely(!or))
+ continue;
+
+ kref_get(&ios->kref);
+ osd_execute_request_async(or, _done_io, ios);
+ }
+
+ kref_put(&ios->kref, _last_io);
+ ret = 0;
+
+ if (sync) {
+ wait_for_completion(&wait);
+ ret = exofs_check_io(ios, NULL);
+ }
+ return ret;
+}
+
+int exofs_check_io(struct exofs_io_state *ios, u64 *resid)
+{
+ enum osd_err_priority acumulated_osd_err = 0;
+ int acumulated_lin_err = 0;
+ int i;
+
+ for (i = 0; i < ios->numdevs; i++) {
+ struct osd_sense_info osi;
+ int ret = osd_req_decode_sense(ios->per_dev[i].or, &osi);
+
+ if (likely(!ret))
+ continue;
+
+ if (unlikely(ret == -EFAULT)) {
+ EXOFS_DBGMSG("%s: EFAULT Need page clear\n", __func__);
+ /*FIXME: All the pages in this device range should:
+ * clear_highpage(page);
+ */
+ }
+
+ if (osi.osd_err_pri >= acumulated_osd_err) {
+ acumulated_osd_err = osi.osd_err_pri;
+ acumulated_lin_err = ret;
+ }
+ }
+
+ /* TODO: raid specific residual calculations */
+ if (resid) {
+ if (likely(!acumulated_lin_err))
+ *resid = 0;
+ else
+ *resid = ios->length;
+ }
+
+ return acumulated_lin_err;
+}
+
+int exofs_sbi_create(struct exofs_io_state *ios)
+{
+ int i, ret;
+
+ for (i = 0; i < ios->sbi->s_numdevs; i++) {
+ struct osd_request *or;
+
+ or = osd_start_request(ios->sbi->s_ods[i], GFP_KERNEL);
+ if (unlikely(!or)) {
+ EXOFS_ERR("%s: osd_start_request failed\n", __func__);
+ ret = -ENOMEM;
+ goto out;
+ }
+ ios->per_dev[i].or = or;
+ ios->numdevs++;
+
+ osd_req_create_object(or, &ios->obj);
+ }
+ ret = exofs_io_execute(ios);
+
+out:
+ return ret;
+}
+
+int exofs_sbi_remove(struct exofs_io_state *ios)
+{
+ int i, ret;
+
+ for (i = 0; i < ios->sbi->s_numdevs; i++) {
+ struct osd_request *or;
+
+ or = osd_start_request(ios->sbi->s_ods[i], GFP_KERNEL);
+ if (unlikely(!or)) {
+ EXOFS_ERR("%s: osd_start_request failed\n", __func__);
+ ret = -ENOMEM;
+ goto out;
+ }
+ ios->per_dev[i].or = or;
+ ios->numdevs++;
+
+ osd_req_remove_object(or, &ios->obj);
+ }
+ ret = exofs_io_execute(ios);
+
+out:
+ return ret;
+}
+
+int exofs_sbi_write(struct exofs_io_state *ios)
+{
+ int i, ret;
+
+ for (i = 0; i < ios->sbi->s_numdevs; i++) {
+ struct osd_request *or;
+
+ or = osd_start_request(ios->sbi->s_ods[i], GFP_KERNEL);
+ if (unlikely(!or)) {
+ EXOFS_ERR("%s: osd_start_request failed\n", __func__);
+ ret = -ENOMEM;
+ goto out;
+ }
+ ios->per_dev[i].or = or;
+ ios->numdevs++;
+
+ if (ios->bio) {
+ struct bio *bio;
+
+ if (i != 0) {
+ bio = bio_kmalloc(GFP_KERNEL,
+ ios->bio->bi_max_vecs);
+ if (unlikely(!bio)) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ __bio_clone(bio, ios->bio);
+ bio->bi_bdev = NULL;
+ bio->bi_next = NULL;
+ ios->per_dev[i].bio = bio;
+ } else {
+ bio = ios->bio;
+ }
+
+ osd_req_write(or, &ios->obj, ios->offset, bio,
+ ios->length);
+/* EXOFS_DBGMSG("write sync=%d\n", sync);*/
+ } else if (ios->kern_buff) {
+ osd_req_write_kern(or, &ios->obj, ios->offset,
+ ios->kern_buff, ios->length);
+/* EXOFS_DBGMSG("write_kern sync=%d\n", sync);*/
+ } else {
+ osd_req_set_attributes(or, &ios->obj);
+/* EXOFS_DBGMSG("set_attributes sync=%d\n", sync);*/
+ }
+
+ if (ios->out_attr)
+ osd_req_add_set_attr_list(or, ios->out_attr,
+ ios->out_attr_len);
+
+ if (ios->in_attr)
+ osd_req_add_get_attr_list(or, ios->in_attr,
+ ios->in_attr_len);
+ }
+ ret = exofs_io_execute(ios);
+
+out:
+ return ret;
+}
+
+int exofs_sbi_read(struct exofs_io_state *ios)
+{
+ int i, ret;
+
+ for (i = 0; i < 1; i++) {
+ struct osd_request *or;
+ unsigned first_dev = (unsigned)ios->obj.id;
+
+ first_dev %= ios->sbi->s_numdevs;
+ or = osd_start_request(ios->sbi->s_ods[first_dev], GFP_KERNEL);
+ if (unlikely(!or)) {
+ EXOFS_ERR("%s: osd_start_request failed\n", __func__);
+ ret = -ENOMEM;
+ goto out;
+ }
+ ios->per_dev[i].or = or;
+ ios->numdevs++;
+
+ if (ios->bio) {
+ osd_req_read(or, &ios->obj, ios->offset, ios->bio,
+ ios->length);
+/* EXOFS_DBGMSG("read sync=%d\n", sync);*/
+ } else if (ios->kern_buff) {
+ osd_req_read_kern(or, &ios->obj, ios->offset,
+ ios->kern_buff, ios->length);
+/* EXOFS_DBGMSG("read_kern sync=%d\n", sync);*/
+ } else {
+ osd_req_get_attributes(or, &ios->obj);
+/* EXOFS_DBGMSG("get_attributes sync=%d\n", sync);*/
+ }
+
+ if (ios->out_attr)
+ osd_req_add_set_attr_list(or, ios->out_attr,
+ ios->out_attr_len);
+
+ if (ios->in_attr)
+ osd_req_add_get_attr_list(or, ios->in_attr,
+ ios->in_attr_len);
+ }
+ ret = exofs_io_execute(ios);
+
+out:
+ return ret;
+}
+
+int extract_attr_from_ios(struct exofs_io_state *ios, struct osd_attr *attr)
+{
+ struct osd_attr cur_attr = {.attr_page = 0}; /* start with zeros */
+ void *iter = NULL;
+ int nelem;
+
+ do {
+ nelem = 1;
+ osd_req_decode_get_attr_list(ios->per_dev[0].or,
+ &cur_attr, &nelem, &iter);
+ if ((cur_attr.attr_page == attr->attr_page) &&
+ (cur_attr.attr_id == attr->attr_id)) {
+ attr->len = cur_attr.len;
+ attr->val_ptr = cur_attr.val_ptr;
+ return 0;
+ }
+ } while (iter);
+
+ return -EIO;
+}
+
+int exofs_oi_truncate(struct exofs_i_info *oi, u64 size)
+{
+ struct exofs_sb_info *sbi = oi->vfs_inode.i_sb->s_fs_info;
+ struct exofs_io_state *ios;
+ struct osd_attr attr;
+ __be64 newsize;
+ int i, ret;
+
+ if (exofs_get_io_state(sbi, &ios))
+ return -ENOMEM;
+
+ ios->obj.id = exofs_oi_objno(oi);
+ ios->cred = oi->i_cred;
+
+ newsize = cpu_to_be64(size);
+ attr = g_attr_logical_length;
+ attr.val_ptr = &newsize;
+
+ for (i = 0; i < sbi->s_numdevs; i++) {
+ struct osd_request *or;
+
+ or = osd_start_request(sbi->s_ods[i], GFP_KERNEL);
+ if (unlikely(!or)) {
+ EXOFS_ERR("%s: osd_start_request failed\n", __func__);
+ ret = -ENOMEM;
+ goto out;
+ }
+ ios->per_dev[i].or = or;
+ ios->numdevs++;
+
+ osd_req_set_attributes(or, &ios->obj);
+ osd_req_add_set_attr_list(or, &attr, 1);
+ }
+ ret = exofs_io_execute(ios);
+
+out:
+ exofs_put_io_state(ios);
+ return ret;
+}
diff --git a/fs/exofs/osd.c b/fs/exofs/osd.c
deleted file mode 100644
index 4372542..0000000
--- a/fs/exofs/osd.c
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- * Copyright (C) 2005, 2006
- * Avishay Traeger (avishay@gmail.com)
- * Copyright (C) 2008, 2009
- * Boaz Harrosh <bharrosh@panasas.com>
- *
- * This file is part of exofs.
- *
- * exofs is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation. Since it is based on ext2, and the only
- * valid version of GPL for the Linux kernel is version 2, the only valid
- * version of GPL for exofs is version 2.
- *
- * exofs is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with exofs; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include <scsi/scsi_device.h>
-#include <scsi/osd_sense.h>
-
-#include "exofs.h"
-
-int exofs_check_ok_resid(struct osd_request *or, u64 *in_resid, u64 *out_resid)
-{
- struct osd_sense_info osi;
- int ret = osd_req_decode_sense(or, &osi);
-
- if (ret) { /* translate to Linux codes */
- if (osi.additional_code == scsi_invalid_field_in_cdb) {
- if (osi.cdb_field_offset == OSD_CFO_STARTING_BYTE)
- ret = -EFAULT;
- if (osi.cdb_field_offset == OSD_CFO_OBJECT_ID)
- ret = -ENOENT;
- else
- ret = -EINVAL;
- } else if (osi.additional_code == osd_quota_error)
- ret = -ENOSPC;
- else
- ret = -EIO;
- }
-
- /* FIXME: should be include in osd_sense_info */
- if (in_resid)
- *in_resid = or->in.req ? or->in.req->resid_len : 0;
-
- if (out_resid)
- *out_resid = or->out.req ? or->out.req->resid_len : 0;
-
- return ret;
-}
-
-void exofs_make_credential(u8 cred_a[OSD_CAP_LEN], const struct osd_obj_id *obj)
-{
- osd_sec_init_nosec_doall_caps(cred_a, obj, false, true);
-}
-
-/*
- * Perform a synchronous OSD operation.
- */
-int exofs_sync_op(struct osd_request *or, int timeout, uint8_t *credential)
-{
- int ret;
-
- or->timeout = timeout;
- ret = osd_finalize_request(or, 0, credential, NULL);
- if (ret) {
- EXOFS_DBGMSG("Faild to osd_finalize_request() => %d\n", ret);
- return ret;
- }
-
- ret = osd_execute_request(or);
-
- if (ret)
- EXOFS_DBGMSG("osd_execute_request() => %d\n", ret);
- /* osd_req_decode_sense(or, ret); */
- return ret;
-}
-
-/*
- * Perform an asynchronous OSD operation.
- */
-int exofs_async_op(struct osd_request *or, osd_req_done_fn *async_done,
- void *caller_context, u8 *cred)
-{
- int ret;
-
- ret = osd_finalize_request(or, 0, cred, NULL);
- if (ret) {
- EXOFS_DBGMSG("Faild to osd_finalize_request() => %d\n", ret);
- return ret;
- }
-
- ret = osd_execute_request_async(or, async_done, caller_context);
-
- if (ret)
- EXOFS_DBGMSG("osd_execute_request_async() => %d\n", ret);
- return ret;
-}
-
-int extract_attr_from_req(struct osd_request *or, struct osd_attr *attr)
-{
- struct osd_attr cur_attr = {.attr_page = 0}; /* start with zeros */
- void *iter = NULL;
- int nelem;
-
- do {
- nelem = 1;
- osd_req_decode_get_attr_list(or, &cur_attr, &nelem, &iter);
- if ((cur_attr.attr_page == attr->attr_page) &&
- (cur_attr.attr_id == attr->attr_id)) {
- attr->len = cur_attr.len;
- attr->val_ptr = cur_attr.val_ptr;
- return 0;
- }
- } while (iter);
-
- return -EIO;
-}
diff --git a/fs/exofs/pnfs.h b/fs/exofs/pnfs.h
new file mode 100644
index 0000000..423033a
--- /dev/null
+++ b/fs/exofs/pnfs.h
@@ -0,0 +1,51 @@
+/*
+ * Copyright (C) 2008, 2009
+ * Boaz Harrosh <bharrosh@panasas.com>
+ *
+ * This file is part of exofs.
+ *
+ * exofs is free software; you can redistribute it and/or modify it under the
+ * terms of the GNU General Public License version 2 as published by the Free
+ * Software Foundation.
+ *
+ */
+
+/* FIXME: Remove this file once pnfs hits mainline */
+
+#ifndef __EXOFS_PNFS_H__
+#define __EXOFS_PNFS_H__
+
+#if defined(CONFIG_PNFS)
+
+
+/* FIXME: move this file to: linux/exportfs/pnfs_osd_xdr.h */
+#include "../nfs/objlayout/pnfs_osd_xdr.h"
+
+#else /* defined(CONFIG_PNFS) */
+
+enum pnfs_iomode {
+ IOMODE_READ = 1,
+ IOMODE_RW = 2,
+ IOMODE_ANY = 3,
+};
+
+/* Layout Structure */
+enum pnfs_osd_raid_algorithm4 {
+ PNFS_OSD_RAID_0 = 1,
+ PNFS_OSD_RAID_4 = 2,
+ PNFS_OSD_RAID_5 = 3,
+ PNFS_OSD_RAID_PQ = 4 /* Reed-Solomon P+Q */
+};
+
+struct pnfs_osd_data_map {
+ u32 odm_num_comps;
+ u64 odm_stripe_unit;
+ u32 odm_group_width;
+ u32 odm_group_depth;
+ u32 odm_mirror_cnt;
+ u32 odm_raid_algorithm;
+};
+
+#endif /* else defined(CONFIG_PNFS) */
+
+#endif /* __EXOFS_PNFS_H__ */
diff --git a/fs/exofs/super.c b/fs/exofs/super.c
index 9f500de..a1d1e77 100644
--- a/fs/exofs/super.c
+++ b/fs/exofs/super.c
@@ -203,49 +203,45 @@
{
struct exofs_sb_info *sbi;
struct exofs_fscb *fscb;
- struct osd_request *or;
- struct osd_obj_id obj;
+ struct exofs_io_state *ios;
int ret = -ENOMEM;
- fscb = kzalloc(sizeof(struct exofs_fscb), GFP_KERNEL);
- if (!fscb) {
- EXOFS_ERR("exofs_write_super: memory allocation failed.\n");
- return -ENOMEM;
- }
-
lock_super(sb);
sbi = sb->s_fs_info;
+ fscb = &sbi->s_fscb;
+
+ ret = exofs_get_io_state(sbi, &ios);
+ if (ret)
+ goto out;
+
+ /* Note: We only write the changing part of the fscb. .i.e upto the
+ * the fscb->s_dev_table_oid member. There is no read-modify-write
+ * here.
+ */
+ ios->length = offsetof(struct exofs_fscb, s_dev_table_oid);
+ memset(fscb, 0, ios->length);
fscb->s_nextid = cpu_to_le64(sbi->s_nextid);
fscb->s_numfiles = cpu_to_le32(sbi->s_numfiles);
fscb->s_magic = cpu_to_le16(sb->s_magic);
fscb->s_newfs = 0;
+ fscb->s_version = EXOFS_FSCB_VER;
- or = osd_start_request(sbi->s_dev, GFP_KERNEL);
- if (unlikely(!or)) {
- EXOFS_ERR("exofs_write_super: osd_start_request failed.\n");
- goto out;
- }
+ ios->obj.id = EXOFS_SUPER_ID;
+ ios->offset = 0;
+ ios->kern_buff = fscb;
+ ios->cred = sbi->s_cred;
- obj.partition = sbi->s_pid;
- obj.id = EXOFS_SUPER_ID;
- ret = osd_req_write_kern(or, &obj, 0, fscb, sizeof(*fscb));
+ ret = exofs_sbi_write(ios);
if (unlikely(ret)) {
- EXOFS_ERR("exofs_write_super: osd_req_write_kern failed.\n");
- goto out;
- }
-
- ret = exofs_sync_op(or, sbi->s_timeout, sbi->s_cred);
- if (unlikely(ret)) {
- EXOFS_ERR("exofs_write_super: exofs_sync_op failed.\n");
+ EXOFS_ERR("%s: exofs_sbi_write failed.\n", __func__);
goto out;
}
sb->s_dirt = 0;
out:
- if (or)
- osd_end_request(or);
+ EXOFS_DBGMSG("s_nextid=0x%llx ret=%d\n", _LLU(sbi->s_nextid), ret);
+ exofs_put_io_state(ios);
unlock_super(sb);
- kfree(fscb);
return ret;
}
@@ -257,6 +253,29 @@
sb->s_dirt = 0;
}
+static void _exofs_print_device(const char *msg, const char *dev_path,
+ struct osd_dev *od, u64 pid)
+{
+ const struct osd_dev_info *odi = osduld_device_info(od);
+
+ printk(KERN_NOTICE "exofs: %s %s osd_name-%s pid-0x%llx\n",
+ msg, dev_path ?: "", odi->osdname, _LLU(pid));
+}
+
+void exofs_free_sbi(struct exofs_sb_info *sbi)
+{
+ while (sbi->s_numdevs) {
+ int i = --sbi->s_numdevs;
+ struct osd_dev *od = sbi->s_ods[i];
+
+ if (od) {
+ sbi->s_ods[i] = NULL;
+ osduld_put_device(od);
+ }
+ }
+ kfree(sbi);
+}
+
/*
* This function is called when the vfs is freeing the superblock. We just
* need to free our own part.
@@ -279,11 +298,182 @@
msecs_to_jiffies(100));
}
- osduld_put_device(sbi->s_dev);
- kfree(sb->s_fs_info);
+ _exofs_print_device("Unmounting", NULL, sbi->s_ods[0], sbi->s_pid);
+
+ exofs_free_sbi(sbi);
sb->s_fs_info = NULL;
}
+static int _read_and_match_data_map(struct exofs_sb_info *sbi, unsigned numdevs,
+ struct exofs_device_table *dt)
+{
+ sbi->data_map.odm_num_comps =
+ le32_to_cpu(dt->dt_data_map.cb_num_comps);
+ sbi->data_map.odm_stripe_unit =
+ le64_to_cpu(dt->dt_data_map.cb_stripe_unit);
+ sbi->data_map.odm_group_width =
+ le32_to_cpu(dt->dt_data_map.cb_group_width);
+ sbi->data_map.odm_group_depth =
+ le32_to_cpu(dt->dt_data_map.cb_group_depth);
+ sbi->data_map.odm_mirror_cnt =
+ le32_to_cpu(dt->dt_data_map.cb_mirror_cnt);
+ sbi->data_map.odm_raid_algorithm =
+ le32_to_cpu(dt->dt_data_map.cb_raid_algorithm);
+
+/* FIXME: Hard coded mirror only for now. if not so do not mount */
+ if ((sbi->data_map.odm_num_comps != numdevs) ||
+ (sbi->data_map.odm_stripe_unit != EXOFS_BLKSIZE) ||
+ (sbi->data_map.odm_raid_algorithm != PNFS_OSD_RAID_0) ||
+ (sbi->data_map.odm_mirror_cnt != (numdevs - 1)))
+ return -EINVAL;
+ else
+ return 0;
+}
+
+/* @odi is valid only as long as @fscb_dev is valid */
+static int exofs_devs_2_odi(struct exofs_dt_device_info *dt_dev,
+ struct osd_dev_info *odi)
+{
+ odi->systemid_len = le32_to_cpu(dt_dev->systemid_len);
+ memcpy(odi->systemid, dt_dev->systemid, odi->systemid_len);
+
+ odi->osdname_len = le32_to_cpu(dt_dev->osdname_len);
+ odi->osdname = dt_dev->osdname;
+
+ /* FIXME support long names. Will need a _put function */
+ if (dt_dev->long_name_offset)
+ return -EINVAL;
+
+ /* Make sure osdname is printable!
+ * mkexofs should give us space for a null-terminator else the
+ * device-table is invalid.
+ */
+ if (unlikely(odi->osdname_len >= sizeof(dt_dev->osdname)))
+ odi->osdname_len = sizeof(dt_dev->osdname) - 1;
+ dt_dev->osdname[odi->osdname_len] = 0;
+
+ /* If it's all zeros something is bad we read past end-of-obj */
+ return !(odi->systemid_len || odi->osdname_len);
+}
+
+static int exofs_read_lookup_dev_table(struct exofs_sb_info **psbi,
+ unsigned table_count)
+{
+ struct exofs_sb_info *sbi = *psbi;
+ struct osd_dev *fscb_od;
+ struct osd_obj_id obj = {.partition = sbi->s_pid,
+ .id = EXOFS_DEVTABLE_ID};
+ struct exofs_device_table *dt;
+ unsigned table_bytes = table_count * sizeof(dt->dt_dev_table[0]) +
+ sizeof(*dt);
+ unsigned numdevs, i;
+ int ret;
+
+ dt = kmalloc(table_bytes, GFP_KERNEL);
+ if (unlikely(!dt)) {
+ EXOFS_ERR("ERROR: allocating %x bytes for device table\n",
+ table_bytes);
+ return -ENOMEM;
+ }
+
+ fscb_od = sbi->s_ods[0];
+ sbi->s_ods[0] = NULL;
+ sbi->s_numdevs = 0;
+ ret = exofs_read_kern(fscb_od, sbi->s_cred, &obj, 0, dt, table_bytes);
+ if (unlikely(ret)) {
+ EXOFS_ERR("ERROR: reading device table\n");
+ goto out;
+ }
+
+ numdevs = le64_to_cpu(dt->dt_num_devices);
+ if (unlikely(!numdevs)) {
+ ret = -EINVAL;
+ goto out;
+ }
+ WARN_ON(table_count != numdevs);
+
+ ret = _read_and_match_data_map(sbi, numdevs, dt);
+ if (unlikely(ret))
+ goto out;
+
+ if (likely(numdevs > 1)) {
+ unsigned size = numdevs * sizeof(sbi->s_ods[0]);
+
+ sbi = krealloc(sbi, sizeof(*sbi) + size, GFP_KERNEL);
+ if (unlikely(!sbi)) {
+ ret = -ENOMEM;
+ goto out;
+ }
+ memset(&sbi->s_ods[1], 0, size - sizeof(sbi->s_ods[0]));
+ *psbi = sbi;
+ }
+
+ for (i = 0; i < numdevs; i++) {
+ struct exofs_fscb fscb;
+ struct osd_dev_info odi;
+ struct osd_dev *od;
+
+ if (exofs_devs_2_odi(&dt->dt_dev_table[i], &odi)) {
+ EXOFS_ERR("ERROR: Read all-zeros device entry\n");
+ ret = -EINVAL;
+ goto out;
+ }
+
+ printk(KERN_NOTICE "Add device[%d]: osd_name-%s\n",
+ i, odi.osdname);
+
+ /* On all devices the device table is identical. The user can
+ * specify any one of the participating devices on the command
+ * line. We always keep them in device-table order.
+ */
+ if (fscb_od && osduld_device_same(fscb_od, &odi)) {
+ sbi->s_ods[i] = fscb_od;
+ ++sbi->s_numdevs;
+ fscb_od = NULL;
+ continue;
+ }
+
+ od = osduld_info_lookup(&odi);
+ if (unlikely(IS_ERR(od))) {
+ ret = PTR_ERR(od);
+ EXOFS_ERR("ERROR: device requested is not found "
+ "osd_name-%s =>%d\n", odi.osdname, ret);
+ goto out;
+ }
+
+ sbi->s_ods[i] = od;
+ ++sbi->s_numdevs;
+
+ /* Read the fscb of the other devices to make sure the FS
+ * partition is there.
+ */
+ ret = exofs_read_kern(od, sbi->s_cred, &obj, 0, &fscb,
+ sizeof(fscb));
+ if (unlikely(ret)) {
+ EXOFS_ERR("ERROR: Malformed participating device "
+ "error reading fscb osd_name-%s\n",
+ odi.osdname);
+ goto out;
+ }
+
+ /* TODO: verify other information is correct and FS-uuid
+ * matches. Benny what did you say about device table
+ * generation and old devices?
+ */
+ }
+
+out:
+ kfree(dt);
+ if (unlikely(!ret && fscb_od)) {
+ EXOFS_ERR(
+ "ERROR: Bad device-table container device not present\n");
+ osduld_put_device(fscb_od);
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+
/*
* Read the superblock from the OSD and fill in the fields
*/
@@ -292,24 +482,25 @@
struct inode *root;
struct exofs_mountopt *opts = data;
struct exofs_sb_info *sbi; /*extended info */
+ struct osd_dev *od; /* Master device */
struct exofs_fscb fscb; /*on-disk superblock info */
- struct osd_request *or = NULL;
struct osd_obj_id obj;
+ unsigned table_count;
int ret;
sbi = kzalloc(sizeof(*sbi), GFP_KERNEL);
if (!sbi)
return -ENOMEM;
- sb->s_fs_info = sbi;
/* use mount options to fill superblock */
- sbi->s_dev = osduld_path_lookup(opts->dev_name);
- if (IS_ERR(sbi->s_dev)) {
- ret = PTR_ERR(sbi->s_dev);
- sbi->s_dev = NULL;
+ od = osduld_path_lookup(opts->dev_name);
+ if (IS_ERR(od)) {
+ ret = PTR_ERR(od);
goto free_sbi;
}
+ sbi->s_ods[0] = od;
+ sbi->s_numdevs = 1;
sbi->s_pid = opts->pid;
sbi->s_timeout = opts->timeout;
@@ -323,35 +514,13 @@
sb->s_bdev = NULL;
sb->s_dev = 0;
- /* read data from on-disk superblock object */
obj.partition = sbi->s_pid;
obj.id = EXOFS_SUPER_ID;
exofs_make_credential(sbi->s_cred, &obj);
- or = osd_start_request(sbi->s_dev, GFP_KERNEL);
- if (unlikely(!or)) {
- if (!silent)
- EXOFS_ERR(
- "exofs_fill_super: osd_start_request failed.\n");
- ret = -ENOMEM;
+ ret = exofs_read_kern(od, sbi->s_cred, &obj, 0, &fscb, sizeof(fscb));
+ if (unlikely(ret))
goto free_sbi;
- }
- ret = osd_req_read_kern(or, &obj, 0, &fscb, sizeof(fscb));
- if (unlikely(ret)) {
- if (!silent)
- EXOFS_ERR(
- "exofs_fill_super: osd_req_read_kern failed.\n");
- ret = -ENOMEM;
- goto free_sbi;
- }
-
- ret = exofs_sync_op(or, sbi->s_timeout, sbi->s_cred);
- if (unlikely(ret)) {
- if (!silent)
- EXOFS_ERR("exofs_fill_super: exofs_sync_op failed.\n");
- ret = -EIO;
- goto free_sbi;
- }
sb->s_magic = le16_to_cpu(fscb.s_magic);
sbi->s_nextid = le64_to_cpu(fscb.s_nextid);
@@ -364,12 +533,26 @@
ret = -EINVAL;
goto free_sbi;
}
+ if (le32_to_cpu(fscb.s_version) != EXOFS_FSCB_VER) {
+ EXOFS_ERR("ERROR: Bad FSCB version expected-%d got-%d\n",
+ EXOFS_FSCB_VER, le32_to_cpu(fscb.s_version));
+ ret = -EINVAL;
+ goto free_sbi;
+ }
/* start generation numbers from a random point */
get_random_bytes(&sbi->s_next_generation, sizeof(u32));
spin_lock_init(&sbi->s_next_gen_lock);
+ table_count = le64_to_cpu(fscb.s_dev_table_count);
+ if (table_count) {
+ ret = exofs_read_lookup_dev_table(&sbi, table_count);
+ if (unlikely(ret))
+ goto free_sbi;
+ }
+
/* set up operation vectors */
+ sb->s_fs_info = sbi;
sb->s_op = &exofs_sops;
sb->s_export_op = &exofs_export_ops;
root = exofs_iget(sb, EXOFS_ROOT_ID - EXOFS_OBJ_OFF);
@@ -395,16 +578,15 @@
goto free_sbi;
}
- ret = 0;
-out:
- if (or)
- osd_end_request(or);
- return ret;
+ _exofs_print_device("Mounting", opts->dev_name, sbi->s_ods[0],
+ sbi->s_pid);
+ return 0;
free_sbi:
- osduld_put_device(sbi->s_dev); /* NULL safe */
- kfree(sbi);
- goto out;
+ EXOFS_ERR("Unable to mount exofs on %s pid=0x%llx err=%d\n",
+ opts->dev_name, sbi->s_pid, ret);
+ exofs_free_sbi(sbi);
+ return ret;
}
/*
@@ -433,7 +615,7 @@
{
struct super_block *sb = dentry->d_sb;
struct exofs_sb_info *sbi = sb->s_fs_info;
- struct osd_obj_id obj = {sbi->s_pid, 0};
+ struct exofs_io_state *ios;
struct osd_attr attrs[] = {
ATTR_DEF(OSD_APAGE_PARTITION_QUOTAS,
OSD_ATTR_PQ_CAPACITY_QUOTA, sizeof(__be64)),
@@ -442,32 +624,33 @@
};
uint64_t capacity = ULLONG_MAX;
uint64_t used = ULLONG_MAX;
- struct osd_request *or;
uint8_t cred_a[OSD_CAP_LEN];
int ret;
- /* get used/capacity attributes */
- exofs_make_credential(cred_a, &obj);
-
- or = osd_start_request(sbi->s_dev, GFP_KERNEL);
- if (unlikely(!or)) {
- EXOFS_DBGMSG("exofs_statfs: osd_start_request failed.\n");
- return -ENOMEM;
+ ret = exofs_get_io_state(sbi, &ios);
+ if (ret) {
+ EXOFS_DBGMSG("exofs_get_io_state failed.\n");
+ return ret;
}
- osd_req_get_attributes(or, &obj);
- osd_req_add_get_attr_list(or, attrs, ARRAY_SIZE(attrs));
- ret = exofs_sync_op(or, sbi->s_timeout, cred_a);
+ exofs_make_credential(cred_a, &ios->obj);
+ ios->cred = sbi->s_cred;
+ ios->in_attr = attrs;
+ ios->in_attr_len = ARRAY_SIZE(attrs);
+
+ ret = exofs_sbi_read(ios);
if (unlikely(ret))
goto out;
- ret = extract_attr_from_req(or, &attrs[0]);
- if (likely(!ret))
+ ret = extract_attr_from_ios(ios, &attrs[0]);
+ if (likely(!ret)) {
capacity = get_unaligned_be64(attrs[0].val_ptr);
- else
+ if (unlikely(!capacity))
+ capacity = ULLONG_MAX;
+ } else
EXOFS_DBGMSG("exofs_statfs: get capacity failed.\n");
- ret = extract_attr_from_req(or, &attrs[1]);
+ ret = extract_attr_from_ios(ios, &attrs[1]);
if (likely(!ret))
used = get_unaligned_be64(attrs[1].val_ptr);
else
@@ -476,15 +659,15 @@
/* fill in the stats buffer */
buf->f_type = EXOFS_SUPER_MAGIC;
buf->f_bsize = EXOFS_BLKSIZE;
- buf->f_blocks = (capacity >> EXOFS_BLKSHIFT);
- buf->f_bfree = ((capacity - used) >> EXOFS_BLKSHIFT);
+ buf->f_blocks = capacity >> 9;
+ buf->f_bfree = (capacity - used) >> 9;
buf->f_bavail = buf->f_bfree;
buf->f_files = sbi->s_numfiles;
buf->f_ffree = EXOFS_MAX_ID - sbi->s_numfiles;
buf->f_namelen = EXOFS_NAME_LEN;
out:
- osd_end_request(or);
+ exofs_put_io_state(ios);
return ret;
}
diff --git a/fs/ext3/inode.c b/fs/ext3/inode.c
index 354ed3b..2db9577 100644
--- a/fs/ext3/inode.c
+++ b/fs/ext3/inode.c
@@ -2033,7 +2033,7 @@
int k, err;
*top = 0;
- /* Make k index the deepest non-null offest + 1 */
+ /* Make k index the deepest non-null offset + 1 */
for (k = depth; k > 1 && !offsets[k-1]; k--)
;
partial = ext3_get_branch(inode, k, offsets, chain, &err);
diff --git a/fs/ext4/Kconfig b/fs/ext4/Kconfig
index 9f2d45d..9acf7e8 100644
--- a/fs/ext4/Kconfig
+++ b/fs/ext4/Kconfig
@@ -26,6 +26,16 @@
If unsure, say N.
+config EXT4_USE_FOR_EXT23
+ bool "Use ext4 for ext2/ext3 file systems"
+ depends on EXT3_FS=n || EXT2_FS=n
+ default y
+ help
+ Allow the ext4 file system driver code to be used for ext2 or
+ ext3 file system mounts. This allows users to reduce their
+ compiled kernel size by using one file system driver for
+ ext2, ext3, and ext4 file systems.
+
config EXT4_FS_XATTR
bool "Ext4 extended attributes"
depends on EXT4_FS
diff --git a/fs/ext4/balloc.c b/fs/ext4/balloc.c
index 1d04189..22bc743 100644
--- a/fs/ext4/balloc.c
+++ b/fs/ext4/balloc.c
@@ -499,44 +499,6 @@
}
/**
- * ext4_free_blocks() -- Free given blocks and update quota
- * @handle: handle for this transaction
- * @inode: inode
- * @block: start physical block to free
- * @count: number of blocks to count
- * @metadata: Are these metadata blocks
- */
-void ext4_free_blocks(handle_t *handle, struct inode *inode,
- ext4_fsblk_t block, unsigned long count,
- int metadata)
-{
- struct super_block *sb;
- unsigned long dquot_freed_blocks;
-
- /* this isn't the right place to decide whether block is metadata
- * inode.c/extents.c knows better, but for safety ... */
- if (S_ISDIR(inode->i_mode) || S_ISLNK(inode->i_mode))
- metadata = 1;
-
- /* We need to make sure we don't reuse
- * block released untill the transaction commit.
- * writeback mode have weak data consistency so
- * don't force data as metadata when freeing block
- * for writeback mode.
- */
- if (metadata == 0 && !ext4_should_writeback_data(inode))
- metadata = 1;
-
- sb = inode->i_sb;
-
- ext4_mb_free_blocks(handle, inode, block, count,
- metadata, &dquot_freed_blocks);
- if (dquot_freed_blocks)
- vfs_dq_free_block(inode, dquot_freed_blocks);
- return;
-}
-
-/**
* ext4_has_free_blocks()
* @sbi: in-core super block structure.
* @nblocks: number of needed blocks
@@ -761,7 +723,13 @@
static unsigned long ext4_bg_num_gdb_nometa(struct super_block *sb,
ext4_group_t group)
{
- return ext4_bg_has_super(sb, group) ? EXT4_SB(sb)->s_gdb_count : 0;
+ if (!ext4_bg_has_super(sb, group))
+ return 0;
+
+ if (EXT4_HAS_INCOMPAT_FEATURE(sb,EXT4_FEATURE_INCOMPAT_META_BG))
+ return le32_to_cpu(EXT4_SB(sb)->s_es->s_first_meta_bg);
+ else
+ return EXT4_SB(sb)->s_gdb_count;
}
/**
diff --git a/fs/ext4/block_validity.c b/fs/ext4/block_validity.c
index 50784ef..4df8621 100644
--- a/fs/ext4/block_validity.c
+++ b/fs/ext4/block_validity.c
@@ -160,7 +160,7 @@
if (ext4_bg_has_super(sb, i) &&
((i < 5) || ((i % flex_size) == 0)))
add_system_zone(sbi, ext4_group_first_block_no(sb, i),
- sbi->s_gdb_count + 1);
+ ext4_bg_num_gdb(sb, i) + 1);
gdp = ext4_get_group_desc(sb, i, NULL);
ret = add_system_zone(sbi, ext4_block_bitmap(sb, gdp), 1);
if (ret)
@@ -228,6 +228,7 @@
struct rb_node *n = sbi->system_blks.rb_node;
if ((start_blk <= le32_to_cpu(sbi->s_es->s_first_data_block)) ||
+ (start_blk + count < start_blk) ||
(start_blk + count > ext4_blocks_count(sbi->s_es)))
return 0;
while (n) {
diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h
index 8825515..ab31e65 100644
--- a/fs/ext4/ext4.h
+++ b/fs/ext4/ext4.h
@@ -376,6 +376,12 @@
EXT4_GET_BLOCKS_DIO_CREATE_EXT)
/*
+ * Flags used by ext4_free_blocks
+ */
+#define EXT4_FREE_BLOCKS_METADATA 0x0001
+#define EXT4_FREE_BLOCKS_FORGET 0x0002
+
+/*
* ioctl commands
*/
#define EXT4_IOC_GETFLAGS FS_IOC_GETFLAGS
@@ -703,6 +709,13 @@
struct list_head i_aio_dio_complete_list;
/* current io_end structure for async DIO write*/
ext4_io_end_t *cur_aio_dio;
+
+ /*
+ * Transactions that contain inode's metadata needed to complete
+ * fsync and fdatasync, respectively.
+ */
+ tid_t i_sync_tid;
+ tid_t i_datasync_tid;
};
/*
@@ -750,6 +763,7 @@
#define EXT4_MOUNT_DELALLOC 0x8000000 /* Delalloc support */
#define EXT4_MOUNT_DATA_ERR_ABORT 0x10000000 /* Abort on file data write */
#define EXT4_MOUNT_BLOCK_VALIDITY 0x20000000 /* Block validity checking */
+#define EXT4_MOUNT_DISCARD 0x40000000 /* Issue DISCARD requests */
#define clear_opt(o, opt) o &= ~EXT4_MOUNT_##opt
#define set_opt(o, opt) o |= EXT4_MOUNT_##opt
@@ -1324,8 +1338,6 @@
ext4_fsblk_t goal, unsigned long *count, int *errp);
extern int ext4_claim_free_blocks(struct ext4_sb_info *sbi, s64 nblocks);
extern int ext4_has_free_blocks(struct ext4_sb_info *sbi, s64 nblocks);
-extern void ext4_free_blocks(handle_t *handle, struct inode *inode,
- ext4_fsblk_t block, unsigned long count, int metadata);
extern void ext4_add_groupblocks(handle_t *handle, struct super_block *sb,
ext4_fsblk_t block, unsigned long count);
extern ext4_fsblk_t ext4_count_free_blocks(struct super_block *);
@@ -1384,16 +1396,15 @@
extern void ext4_discard_preallocations(struct inode *);
extern int __init init_ext4_mballoc(void);
extern void exit_ext4_mballoc(void);
-extern void ext4_mb_free_blocks(handle_t *, struct inode *,
- ext4_fsblk_t, unsigned long, int, unsigned long *);
+extern void ext4_free_blocks(handle_t *handle, struct inode *inode,
+ struct buffer_head *bh, ext4_fsblk_t block,
+ unsigned long count, int flags);
extern int ext4_mb_add_groupinfo(struct super_block *sb,
ext4_group_t i, struct ext4_group_desc *desc);
extern int ext4_mb_get_buddy_cache_lock(struct super_block *, ext4_group_t);
extern void ext4_mb_put_buddy_cache_lock(struct super_block *,
ext4_group_t, int);
/* inode.c */
-int ext4_forget(handle_t *handle, int is_metadata, struct inode *inode,
- struct buffer_head *bh, ext4_fsblk_t blocknr);
struct buffer_head *ext4_getblk(handle_t *, struct inode *,
ext4_lblk_t, int, int *);
struct buffer_head *ext4_bread(handle_t *, struct inode *,
diff --git a/fs/ext4/ext4_jbd2.c b/fs/ext4/ext4_jbd2.c
index 6a94099..b57e5c7 100644
--- a/fs/ext4/ext4_jbd2.c
+++ b/fs/ext4/ext4_jbd2.c
@@ -4,6 +4,8 @@
#include "ext4_jbd2.h"
+#include <trace/events/ext4.h>
+
int __ext4_journal_get_undo_access(const char *where, handle_t *handle,
struct buffer_head *bh)
{
@@ -32,35 +34,69 @@
return err;
}
-int __ext4_journal_forget(const char *where, handle_t *handle,
- struct buffer_head *bh)
+/*
+ * The ext4 forget function must perform a revoke if we are freeing data
+ * which has been journaled. Metadata (eg. indirect blocks) must be
+ * revoked in all cases.
+ *
+ * "bh" may be NULL: a metadata block may have been freed from memory
+ * but there may still be a record of it in the journal, and that record
+ * still needs to be revoked.
+ *
+ * If the handle isn't valid we're not journaling, but we still need to
+ * call into ext4_journal_revoke() to put the buffer head.
+ */
+int __ext4_forget(const char *where, handle_t *handle, int is_metadata,
+ struct inode *inode, struct buffer_head *bh,
+ ext4_fsblk_t blocknr)
{
- int err = 0;
+ int err;
- if (ext4_handle_valid(handle)) {
- err = jbd2_journal_forget(handle, bh);
- if (err)
- ext4_journal_abort_handle(where, __func__, bh,
- handle, err);
- }
- else
+ might_sleep();
+
+ trace_ext4_forget(inode, is_metadata, blocknr);
+ BUFFER_TRACE(bh, "enter");
+
+ jbd_debug(4, "forgetting bh %p: is_metadata = %d, mode %o, "
+ "data mode %x\n",
+ bh, is_metadata, inode->i_mode,
+ test_opt(inode->i_sb, DATA_FLAGS));
+
+ /* In the no journal case, we can just do a bforget and return */
+ if (!ext4_handle_valid(handle)) {
bforget(bh);
- return err;
-}
-
-int __ext4_journal_revoke(const char *where, handle_t *handle,
- ext4_fsblk_t blocknr, struct buffer_head *bh)
-{
- int err = 0;
-
- if (ext4_handle_valid(handle)) {
- err = jbd2_journal_revoke(handle, blocknr, bh);
- if (err)
- ext4_journal_abort_handle(where, __func__, bh,
- handle, err);
+ return 0;
}
- else
- bforget(bh);
+
+ /* Never use the revoke function if we are doing full data
+ * journaling: there is no need to, and a V1 superblock won't
+ * support it. Otherwise, only skip the revoke on un-journaled
+ * data blocks. */
+
+ if (test_opt(inode->i_sb, DATA_FLAGS) == EXT4_MOUNT_JOURNAL_DATA ||
+ (!is_metadata && !ext4_should_journal_data(inode))) {
+ if (bh) {
+ BUFFER_TRACE(bh, "call jbd2_journal_forget");
+ err = jbd2_journal_forget(handle, bh);
+ if (err)
+ ext4_journal_abort_handle(where, __func__, bh,
+ handle, err);
+ return err;
+ }
+ return 0;
+ }
+
+ /*
+ * data!=journal && (is_metadata || should_journal_data(inode))
+ */
+ BUFFER_TRACE(bh, "call jbd2_journal_revoke");
+ err = jbd2_journal_revoke(handle, blocknr, bh);
+ if (err) {
+ ext4_journal_abort_handle(where, __func__, bh, handle, err);
+ ext4_abort(inode->i_sb, __func__,
+ "error %d when attempting revoke", err);
+ }
+ BUFFER_TRACE(bh, "exit");
return err;
}
diff --git a/fs/ext4/ext4_jbd2.h b/fs/ext4/ext4_jbd2.h
index a286598..05eca81 100644
--- a/fs/ext4/ext4_jbd2.h
+++ b/fs/ext4/ext4_jbd2.h
@@ -49,7 +49,7 @@
#define EXT4_DATA_TRANS_BLOCKS(sb) (EXT4_SINGLEDATA_TRANS_BLOCKS(sb) + \
EXT4_XATTR_TRANS_BLOCKS - 2 + \
- 2*EXT4_QUOTA_TRANS_BLOCKS(sb))
+ EXT4_MAXQUOTAS_TRANS_BLOCKS(sb))
/*
* Define the number of metadata blocks we need to account to modify data.
@@ -57,7 +57,7 @@
* This include super block, inode block, quota blocks and xattr blocks
*/
#define EXT4_META_TRANS_BLOCKS(sb) (EXT4_XATTR_TRANS_BLOCKS + \
- 2*EXT4_QUOTA_TRANS_BLOCKS(sb))
+ EXT4_MAXQUOTAS_TRANS_BLOCKS(sb))
/* Delete operations potentially hit one directory's namespace plus an
* entire inode, plus arbitrary amounts of bitmap/indirection data. Be
@@ -92,6 +92,7 @@
* but inode, sb and group updates are done only once */
#define EXT4_QUOTA_INIT_BLOCKS(sb) (test_opt(sb, QUOTA) ? (DQUOT_INIT_ALLOC*\
(EXT4_SINGLEDATA_TRANS_BLOCKS(sb)-3)+3+DQUOT_INIT_REWRITE) : 0)
+
#define EXT4_QUOTA_DEL_BLOCKS(sb) (test_opt(sb, QUOTA) ? (DQUOT_DEL_ALLOC*\
(EXT4_SINGLEDATA_TRANS_BLOCKS(sb)-3)+3+DQUOT_DEL_REWRITE) : 0)
#else
@@ -99,6 +100,9 @@
#define EXT4_QUOTA_INIT_BLOCKS(sb) 0
#define EXT4_QUOTA_DEL_BLOCKS(sb) 0
#endif
+#define EXT4_MAXQUOTAS_TRANS_BLOCKS(sb) (MAXQUOTAS*EXT4_QUOTA_TRANS_BLOCKS(sb))
+#define EXT4_MAXQUOTAS_INIT_BLOCKS(sb) (MAXQUOTAS*EXT4_QUOTA_INIT_BLOCKS(sb))
+#define EXT4_MAXQUOTAS_DEL_BLOCKS(sb) (MAXQUOTAS*EXT4_QUOTA_DEL_BLOCKS(sb))
int
ext4_mark_iloc_dirty(handle_t *handle,
@@ -116,12 +120,8 @@
int ext4_mark_inode_dirty(handle_t *handle, struct inode *inode);
/*
- * Wrapper functions with which ext4 calls into JBD. The intent here is
- * to allow these to be turned into appropriate stubs so ext4 can control
- * ext2 filesystems, so ext2+ext4 systems only nee one fs. This work hasn't
- * been done yet.
+ * Wrapper functions with which ext4 calls into JBD.
*/
-
void ext4_journal_abort_handle(const char *caller, const char *err_fn,
struct buffer_head *bh, handle_t *handle, int err);
@@ -131,13 +131,9 @@
int __ext4_journal_get_write_access(const char *where, handle_t *handle,
struct buffer_head *bh);
-/* When called with an invalid handle, this will still do a put on the BH */
-int __ext4_journal_forget(const char *where, handle_t *handle,
- struct buffer_head *bh);
-
-/* When called with an invalid handle, this will still do a put on the BH */
-int __ext4_journal_revoke(const char *where, handle_t *handle,
- ext4_fsblk_t blocknr, struct buffer_head *bh);
+int __ext4_forget(const char *where, handle_t *handle, int is_metadata,
+ struct inode *inode, struct buffer_head *bh,
+ ext4_fsblk_t blocknr);
int __ext4_journal_get_create_access(const char *where,
handle_t *handle, struct buffer_head *bh);
@@ -149,12 +145,11 @@
__ext4_journal_get_undo_access(__func__, (handle), (bh))
#define ext4_journal_get_write_access(handle, bh) \
__ext4_journal_get_write_access(__func__, (handle), (bh))
-#define ext4_journal_revoke(handle, blocknr, bh) \
- __ext4_journal_revoke(__func__, (handle), (blocknr), (bh))
+#define ext4_forget(handle, is_metadata, inode, bh, block_nr) \
+ __ext4_forget(__func__, (handle), (is_metadata), (inode), (bh),\
+ (block_nr))
#define ext4_journal_get_create_access(handle, bh) \
__ext4_journal_get_create_access(__func__, (handle), (bh))
-#define ext4_journal_forget(handle, bh) \
- __ext4_journal_forget(__func__, (handle), (bh))
#define ext4_handle_dirty_metadata(handle, inode, bh) \
__ext4_handle_dirty_metadata(__func__, (handle), (inode), (bh))
@@ -254,6 +249,19 @@
return 0;
}
+static inline void ext4_update_inode_fsync_trans(handle_t *handle,
+ struct inode *inode,
+ int datasync)
+{
+ struct ext4_inode_info *ei = EXT4_I(inode);
+
+ if (ext4_handle_valid(handle)) {
+ ei->i_sync_tid = handle->h_transaction->t_tid;
+ if (datasync)
+ ei->i_datasync_tid = handle->h_transaction->t_tid;
+ }
+}
+
/* super.c */
int ext4_force_commit(struct super_block *sb);
diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c
index 715264b..3a7928f 100644
--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -1007,7 +1007,8 @@
for (i = 0; i < depth; i++) {
if (!ablocks[i])
continue;
- ext4_free_blocks(handle, inode, ablocks[i], 1, 1);
+ ext4_free_blocks(handle, inode, 0, ablocks[i], 1,
+ EXT4_FREE_BLOCKS_METADATA);
}
}
kfree(ablocks);
@@ -1761,7 +1762,9 @@
while (block < last && block != EXT_MAX_BLOCK) {
num = last - block;
/* find extent for this block */
+ down_read(&EXT4_I(inode)->i_data_sem);
path = ext4_ext_find_extent(inode, block, path);
+ up_read(&EXT4_I(inode)->i_data_sem);
if (IS_ERR(path)) {
err = PTR_ERR(path);
path = NULL;
@@ -1957,7 +1960,6 @@
static int ext4_ext_rm_idx(handle_t *handle, struct inode *inode,
struct ext4_ext_path *path)
{
- struct buffer_head *bh;
int err;
ext4_fsblk_t leaf;
@@ -1973,9 +1975,8 @@
if (err)
return err;
ext_debug("index is empty, remove it, free block %llu\n", leaf);
- bh = sb_find_get_block(inode->i_sb, leaf);
- ext4_forget(handle, 1, inode, bh, leaf);
- ext4_free_blocks(handle, inode, leaf, 1, 1);
+ ext4_free_blocks(handle, inode, 0, leaf, 1,
+ EXT4_FREE_BLOCKS_METADATA | EXT4_FREE_BLOCKS_FORGET);
return err;
}
@@ -2042,12 +2043,11 @@
struct ext4_extent *ex,
ext4_lblk_t from, ext4_lblk_t to)
{
- struct buffer_head *bh;
unsigned short ee_len = ext4_ext_get_actual_len(ex);
- int i, metadata = 0;
+ int flags = EXT4_FREE_BLOCKS_FORGET;
if (S_ISDIR(inode->i_mode) || S_ISLNK(inode->i_mode))
- metadata = 1;
+ flags |= EXT4_FREE_BLOCKS_METADATA;
#ifdef EXTENTS_STATS
{
struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb);
@@ -2072,11 +2072,7 @@
num = le32_to_cpu(ex->ee_block) + ee_len - from;
start = ext_pblock(ex) + ee_len - num;
ext_debug("free last %u blocks starting %llu\n", num, start);
- for (i = 0; i < num; i++) {
- bh = sb_find_get_block(inode->i_sb, start + i);
- ext4_forget(handle, 0, inode, bh, start + i);
- }
- ext4_free_blocks(handle, inode, start, num, metadata);
+ ext4_free_blocks(handle, inode, 0, start, num, flags);
} else if (from == le32_to_cpu(ex->ee_block)
&& to <= le32_to_cpu(ex->ee_block) + ee_len - 1) {
printk(KERN_INFO "strange request: removal %u-%u from %u:%u\n",
@@ -2167,7 +2163,7 @@
correct_index = 1;
credits += (ext_depth(inode)) + 1;
}
- credits += 2 * EXT4_QUOTA_TRANS_BLOCKS(inode->i_sb);
+ credits += EXT4_MAXQUOTAS_TRANS_BLOCKS(inode->i_sb);
err = ext4_ext_truncate_extend_restart(handle, inode, credits);
if (err)
@@ -3064,6 +3060,8 @@
if (flags == EXT4_GET_BLOCKS_DIO_CONVERT_EXT) {
ret = ext4_convert_unwritten_extents_dio(handle, inode,
path);
+ if (ret >= 0)
+ ext4_update_inode_fsync_trans(handle, inode, 1);
goto out2;
}
/* buffered IO case */
@@ -3091,6 +3089,8 @@
ret = ext4_ext_convert_to_initialized(handle, inode,
path, iblock,
max_blocks);
+ if (ret >= 0)
+ ext4_update_inode_fsync_trans(handle, inode, 1);
out:
if (ret <= 0) {
err = ret;
@@ -3319,8 +3319,8 @@
/* not a good idea to call discard here directly,
* but otherwise we'd need to call it every free() */
ext4_discard_preallocations(inode);
- ext4_free_blocks(handle, inode, ext_pblock(&newex),
- ext4_ext_get_actual_len(&newex), 0);
+ ext4_free_blocks(handle, inode, 0, ext_pblock(&newex),
+ ext4_ext_get_actual_len(&newex), 0);
goto out2;
}
@@ -3329,10 +3329,16 @@
allocated = ext4_ext_get_actual_len(&newex);
set_buffer_new(bh_result);
- /* Cache only when it is _not_ an uninitialized extent */
- if ((flags & EXT4_GET_BLOCKS_UNINIT_EXT) == 0)
+ /*
+ * Cache the extent and update transaction to commit on fdatasync only
+ * when it is _not_ an uninitialized extent.
+ */
+ if ((flags & EXT4_GET_BLOCKS_UNINIT_EXT) == 0) {
ext4_ext_put_in_cache(inode, iblock, allocated, newblock,
EXT4_EXT_CACHE_EXTENT);
+ ext4_update_inode_fsync_trans(handle, inode, 1);
+ } else
+ ext4_update_inode_fsync_trans(handle, inode, 0);
out:
if (allocated > max_blocks)
allocated = max_blocks;
@@ -3720,10 +3726,8 @@
* Walk the extent tree gathering extent information.
* ext4_ext_fiemap_cb will push extents back to user.
*/
- down_read(&EXT4_I(inode)->i_data_sem);
error = ext4_ext_walk_space(inode, start_blk, len_blks,
ext4_ext_fiemap_cb, fieinfo);
- up_read(&EXT4_I(inode)->i_data_sem);
}
return error;
diff --git a/fs/ext4/fsync.c b/fs/ext4/fsync.c
index 2b15312..0b22497 100644
--- a/fs/ext4/fsync.c
+++ b/fs/ext4/fsync.c
@@ -51,25 +51,30 @@
int ext4_sync_file(struct file *file, struct dentry *dentry, int datasync)
{
struct inode *inode = dentry->d_inode;
+ struct ext4_inode_info *ei = EXT4_I(inode);
journal_t *journal = EXT4_SB(inode->i_sb)->s_journal;
- int err, ret = 0;
+ int ret;
+ tid_t commit_tid;
J_ASSERT(ext4_journal_current_handle() == NULL);
trace_ext4_sync_file(file, dentry, datasync);
+ if (inode->i_sb->s_flags & MS_RDONLY)
+ return 0;
+
ret = flush_aio_dio_completed_IO(inode);
if (ret < 0)
- goto out;
+ return ret;
+
+ if (!journal)
+ return simple_fsync(file, dentry, datasync);
+
/*
- * data=writeback:
+ * data=writeback,ordered:
* The caller's filemap_fdatawrite()/wait will sync the data.
- * sync_inode() will sync the metadata
- *
- * data=ordered:
- * The caller's filemap_fdatawrite() will write the data and
- * sync_inode() will write the inode if it is dirty. Then the caller's
- * filemap_fdatawait() will wait on the pages.
+ * Metadata is in the journal, we wait for proper transaction to
+ * commit here.
*
* data=journal:
* filemap_fdatawrite won't do anything (the buffers are clean).
@@ -79,32 +84,13 @@
* (they were dirtied by commit). But that's OK - the blocks are
* safe in-journal, which is all fsync() needs to ensure.
*/
- if (ext4_should_journal_data(inode)) {
- ret = ext4_force_commit(inode->i_sb);
- goto out;
- }
+ if (ext4_should_journal_data(inode))
+ return ext4_force_commit(inode->i_sb);
- if (!journal)
- ret = sync_mapping_buffers(inode->i_mapping);
-
- if (datasync && !(inode->i_state & I_DIRTY_DATASYNC))
- goto out;
-
- /*
- * The VFS has written the file data. If the inode is unaltered
- * then we need not start a commit.
- */
- if (inode->i_state & (I_DIRTY_SYNC|I_DIRTY_DATASYNC)) {
- struct writeback_control wbc = {
- .sync_mode = WB_SYNC_ALL,
- .nr_to_write = 0, /* sys_fsync did this */
- };
- err = sync_inode(inode, &wbc);
- if (ret == 0)
- ret = err;
- }
-out:
- if (journal && (journal->j_flags & JBD2_BARRIER))
+ commit_tid = datasync ? ei->i_datasync_tid : ei->i_sync_tid;
+ if (jbd2_log_start_commit(journal, commit_tid))
+ jbd2_log_wait_commit(journal, commit_tid);
+ else if (journal->j_flags & JBD2_BARRIER)
blkdev_issue_flush(inode->i_sb->s_bdev, NULL);
return ret;
}
diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index 2c8caa5..5352db1 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -71,58 +71,6 @@
}
/*
- * The ext4 forget function must perform a revoke if we are freeing data
- * which has been journaled. Metadata (eg. indirect blocks) must be
- * revoked in all cases.
- *
- * "bh" may be NULL: a metadata block may have been freed from memory
- * but there may still be a record of it in the journal, and that record
- * still needs to be revoked.
- *
- * If the handle isn't valid we're not journaling, but we still need to
- * call into ext4_journal_revoke() to put the buffer head.
- */
-int ext4_forget(handle_t *handle, int is_metadata, struct inode *inode,
- struct buffer_head *bh, ext4_fsblk_t blocknr)
-{
- int err;
-
- might_sleep();
-
- BUFFER_TRACE(bh, "enter");
-
- jbd_debug(4, "forgetting bh %p: is_metadata = %d, mode %o, "
- "data mode %x\n",
- bh, is_metadata, inode->i_mode,
- test_opt(inode->i_sb, DATA_FLAGS));
-
- /* Never use the revoke function if we are doing full data
- * journaling: there is no need to, and a V1 superblock won't
- * support it. Otherwise, only skip the revoke on un-journaled
- * data blocks. */
-
- if (test_opt(inode->i_sb, DATA_FLAGS) == EXT4_MOUNT_JOURNAL_DATA ||
- (!is_metadata && !ext4_should_journal_data(inode))) {
- if (bh) {
- BUFFER_TRACE(bh, "call jbd2_journal_forget");
- return ext4_journal_forget(handle, bh);
- }
- return 0;
- }
-
- /*
- * data!=journal && (is_metadata || should_journal_data(inode))
- */
- BUFFER_TRACE(bh, "call ext4_journal_revoke");
- err = ext4_journal_revoke(handle, blocknr, bh);
- if (err)
- ext4_abort(inode->i_sb, __func__,
- "error %d when attempting revoke", err);
- BUFFER_TRACE(bh, "exit");
- return err;
-}
-
-/*
* Work out how many blocks we need to proceed with the next chunk of a
* truncate transaction.
*/
@@ -721,7 +669,7 @@
return ret;
failed_out:
for (i = 0; i < index; i++)
- ext4_free_blocks(handle, inode, new_blocks[i], 1, 0);
+ ext4_free_blocks(handle, inode, 0, new_blocks[i], 1, 0);
return ret;
}
@@ -817,14 +765,20 @@
return err;
failed:
/* Allocation failed, free what we already allocated */
+ ext4_free_blocks(handle, inode, 0, new_blocks[0], 1, 0);
for (i = 1; i <= n ; i++) {
- BUFFER_TRACE(branch[i].bh, "call jbd2_journal_forget");
- ext4_journal_forget(handle, branch[i].bh);
+ /*
+ * branch[i].bh is newly allocated, so there is no
+ * need to revoke the block, which is why we don't
+ * need to set EXT4_FREE_BLOCKS_METADATA.
+ */
+ ext4_free_blocks(handle, inode, 0, new_blocks[i], 1,
+ EXT4_FREE_BLOCKS_FORGET);
}
- for (i = 0; i < indirect_blks; i++)
- ext4_free_blocks(handle, inode, new_blocks[i], 1, 0);
+ for (i = n+1; i < indirect_blks; i++)
+ ext4_free_blocks(handle, inode, 0, new_blocks[i], 1, 0);
- ext4_free_blocks(handle, inode, new_blocks[i], num, 0);
+ ext4_free_blocks(handle, inode, 0, new_blocks[i], num, 0);
return err;
}
@@ -903,12 +857,16 @@
err_out:
for (i = 1; i <= num; i++) {
- BUFFER_TRACE(where[i].bh, "call jbd2_journal_forget");
- ext4_journal_forget(handle, where[i].bh);
- ext4_free_blocks(handle, inode,
- le32_to_cpu(where[i-1].key), 1, 0);
+ /*
+ * branch[i].bh is newly allocated, so there is no
+ * need to revoke the block, which is why we don't
+ * need to set EXT4_FREE_BLOCKS_METADATA.
+ */
+ ext4_free_blocks(handle, inode, where[i].bh, 0, 1,
+ EXT4_FREE_BLOCKS_FORGET);
}
- ext4_free_blocks(handle, inode, le32_to_cpu(where[num].key), blks, 0);
+ ext4_free_blocks(handle, inode, 0, le32_to_cpu(where[num].key),
+ blks, 0);
return err;
}
@@ -1021,10 +979,12 @@
if (!err)
err = ext4_splice_branch(handle, inode, iblock,
partial, indirect_blks, count);
- else
+ if (err)
goto cleanup;
set_buffer_new(bh_result);
+
+ ext4_update_inode_fsync_trans(handle, inode, 1);
got_it:
map_bh(bh_result, inode->i_sb, le32_to_cpu(chain[depth-1].key));
if (count > blocks_to_boundary)
@@ -1052,7 +1012,7 @@
EXT4_I(inode)->i_reserved_meta_blocks;
spin_unlock(&EXT4_I(inode)->i_block_reservation_lock);
- return total;
+ return (total << inode->i_blkbits);
}
/*
* Calculate the number of metadata blocks need to reserve
@@ -1534,6 +1494,16 @@
return ext4_journal_get_write_access(handle, bh);
}
+/*
+ * Truncate blocks that were not used by write. We have to truncate the
+ * pagecache as well so that corresponding buffers get properly unmapped.
+ */
+static void ext4_truncate_failed_write(struct inode *inode)
+{
+ truncate_inode_pages(inode->i_mapping, inode->i_size);
+ ext4_truncate(inode);
+}
+
static int ext4_write_begin(struct file *file, struct address_space *mapping,
loff_t pos, unsigned len, unsigned flags,
struct page **pagep, void **fsdata)
@@ -1599,7 +1569,7 @@
ext4_journal_stop(handle);
if (pos + len > inode->i_size) {
- ext4_truncate(inode);
+ ext4_truncate_failed_write(inode);
/*
* If truncate failed early the inode might
* still be on the orphan list; we need to
@@ -1709,7 +1679,7 @@
ret = ret2;
if (pos + len > inode->i_size) {
- ext4_truncate(inode);
+ ext4_truncate_failed_write(inode);
/*
* If truncate failed early the inode might still be
* on the orphan list; we need to make sure the inode
@@ -1751,7 +1721,7 @@
ret = ret2;
if (pos + len > inode->i_size) {
- ext4_truncate(inode);
+ ext4_truncate_failed_write(inode);
/*
* If truncate failed early the inode might still be
* on the orphan list; we need to make sure the inode
@@ -1814,7 +1784,7 @@
if (!ret)
ret = ret2;
if (pos + len > inode->i_size) {
- ext4_truncate(inode);
+ ext4_truncate_failed_write(inode);
/*
* If truncate failed early the inode might still be
* on the orphan list; we need to make sure the inode
@@ -2600,7 +2570,6 @@
}
static int __ext4_journalled_writepage(struct page *page,
- struct writeback_control *wbc,
unsigned int len)
{
struct address_space *mapping = page->mapping;
@@ -2758,7 +2727,7 @@
* doesn't seem much point in redirtying the page here.
*/
ClearPageChecked(page);
- return __ext4_journalled_writepage(page, wbc, len);
+ return __ext4_journalled_writepage(page, len);
}
if (test_opt(inode->i_sb, NOBH) && ext4_should_writeback_data(inode))
@@ -2788,7 +2757,7 @@
* number of contiguous block. So we will limit
* number of contiguous block to a sane value
*/
- if (!(inode->i_flags & EXT4_EXTENTS_FL) &&
+ if (!(EXT4_I(inode)->i_flags & EXT4_EXTENTS_FL) &&
(max_blocks > EXT4_MAX_TRANS_DATA))
max_blocks = EXT4_MAX_TRANS_DATA;
@@ -2933,7 +2902,7 @@
ret = write_cache_pages(mapping, wbc, __mpage_da_writepage,
&mpd);
/*
- * If we have a contigous extent of pages and we
+ * If we have a contiguous extent of pages and we
* haven't done the I/O yet, map the blocks and submit
* them for I/O.
*/
@@ -3091,7 +3060,7 @@
* i_size_read because we hold i_mutex.
*/
if (pos + len > inode->i_size)
- ext4_truncate(inode);
+ ext4_truncate_failed_write(inode);
}
if (ret == -ENOSPC && ext4_should_retry_alloc(inode->i_sb, &retries))
@@ -4064,7 +4033,7 @@
int k, err;
*top = 0;
- /* Make k index the deepest non-null offest + 1 */
+ /* Make k index the deepest non-null offset + 1 */
for (k = depth; k > 1 && !offsets[k-1]; k--)
;
partial = ext4_get_branch(inode, k, offsets, chain, &err);
@@ -4120,6 +4089,11 @@
__le32 *last)
{
__le32 *p;
+ int flags = EXT4_FREE_BLOCKS_FORGET;
+
+ if (S_ISDIR(inode->i_mode) || S_ISLNK(inode->i_mode))
+ flags |= EXT4_FREE_BLOCKS_METADATA;
+
if (try_to_extend_transaction(handle, inode)) {
if (bh) {
BUFFER_TRACE(bh, "call ext4_handle_dirty_metadata");
@@ -4134,27 +4108,10 @@
}
}
- /*
- * Any buffers which are on the journal will be in memory. We
- * find them on the hash table so jbd2_journal_revoke() will
- * run jbd2_journal_forget() on them. We've already detached
- * each block from the file, so bforget() in
- * jbd2_journal_forget() should be safe.
- *
- * AKPM: turn on bforget in jbd2_journal_forget()!!!
- */
- for (p = first; p < last; p++) {
- u32 nr = le32_to_cpu(*p);
- if (nr) {
- struct buffer_head *tbh;
+ for (p = first; p < last; p++)
+ *p = 0;
- *p = 0;
- tbh = sb_find_get_block(inode->i_sb, nr);
- ext4_forget(handle, 0, inode, tbh, nr);
- }
- }
-
- ext4_free_blocks(handle, inode, block_to_free, count, 0);
+ ext4_free_blocks(handle, inode, 0, block_to_free, count, flags);
}
/**
@@ -4342,7 +4299,8 @@
blocks_for_truncate(inode));
}
- ext4_free_blocks(handle, inode, nr, 1, 1);
+ ext4_free_blocks(handle, inode, 0, nr, 1,
+ EXT4_FREE_BLOCKS_METADATA);
if (parent_bh) {
/*
@@ -4781,8 +4739,8 @@
struct ext4_iloc iloc;
struct ext4_inode *raw_inode;
struct ext4_inode_info *ei;
- struct buffer_head *bh;
struct inode *inode;
+ journal_t *journal = EXT4_SB(sb)->s_journal;
long ret;
int block;
@@ -4793,11 +4751,11 @@
return inode;
ei = EXT4_I(inode);
+ iloc.bh = 0;
ret = __ext4_get_inode_loc(inode, &iloc, 0);
if (ret < 0)
goto bad_inode;
- bh = iloc.bh;
raw_inode = ext4_raw_inode(&iloc);
inode->i_mode = le16_to_cpu(raw_inode->i_mode);
inode->i_uid = (uid_t)le16_to_cpu(raw_inode->i_uid_low);
@@ -4820,7 +4778,6 @@
if (inode->i_mode == 0 ||
!(EXT4_SB(inode->i_sb)->s_mount_state & EXT4_ORPHAN_FS)) {
/* this inode is deleted */
- brelse(bh);
ret = -ESTALE;
goto bad_inode;
}
@@ -4848,11 +4805,35 @@
ei->i_data[block] = raw_inode->i_block[block];
INIT_LIST_HEAD(&ei->i_orphan);
+ /*
+ * Set transaction id's of transactions that have to be committed
+ * to finish f[data]sync. We set them to currently running transaction
+ * as we cannot be sure that the inode or some of its metadata isn't
+ * part of the transaction - the inode could have been reclaimed and
+ * now it is reread from disk.
+ */
+ if (journal) {
+ transaction_t *transaction;
+ tid_t tid;
+
+ spin_lock(&journal->j_state_lock);
+ if (journal->j_running_transaction)
+ transaction = journal->j_running_transaction;
+ else
+ transaction = journal->j_committing_transaction;
+ if (transaction)
+ tid = transaction->t_tid;
+ else
+ tid = journal->j_commit_sequence;
+ spin_unlock(&journal->j_state_lock);
+ ei->i_sync_tid = tid;
+ ei->i_datasync_tid = tid;
+ }
+
if (EXT4_INODE_SIZE(inode->i_sb) > EXT4_GOOD_OLD_INODE_SIZE) {
ei->i_extra_isize = le16_to_cpu(raw_inode->i_extra_isize);
if (EXT4_GOOD_OLD_INODE_SIZE + ei->i_extra_isize >
EXT4_INODE_SIZE(inode->i_sb)) {
- brelse(bh);
ret = -EIO;
goto bad_inode;
}
@@ -4884,10 +4865,7 @@
ret = 0;
if (ei->i_file_acl &&
- ((ei->i_file_acl <
- (le32_to_cpu(EXT4_SB(sb)->s_es->s_first_data_block) +
- EXT4_SB(sb)->s_gdb_count)) ||
- (ei->i_file_acl >= ext4_blocks_count(EXT4_SB(sb)->s_es)))) {
+ !ext4_data_block_valid(EXT4_SB(sb), ei->i_file_acl, 1)) {
ext4_error(sb, __func__,
"bad extended attribute block %llu in inode #%lu",
ei->i_file_acl, inode->i_ino);
@@ -4905,10 +4883,8 @@
/* Validate block references which are part of inode */
ret = ext4_check_inode_blockref(inode);
}
- if (ret) {
- brelse(bh);
+ if (ret)
goto bad_inode;
- }
if (S_ISREG(inode->i_mode)) {
inode->i_op = &ext4_file_inode_operations;
@@ -4936,7 +4912,6 @@
init_special_inode(inode, inode->i_mode,
new_decode_dev(le32_to_cpu(raw_inode->i_block[1])));
} else {
- brelse(bh);
ret = -EIO;
ext4_error(inode->i_sb, __func__,
"bogus i_mode (%o) for inode=%lu",
@@ -4949,6 +4924,7 @@
return inode;
bad_inode:
+ brelse(iloc.bh);
iget_failed(inode);
return ERR_PTR(ret);
}
@@ -5108,6 +5084,7 @@
err = rc;
ei->i_state &= ~EXT4_STATE_NEW;
+ ext4_update_inode_fsync_trans(handle, inode, 0);
out_brelse:
brelse(bh);
ext4_std_error(inode->i_sb, err);
@@ -5227,8 +5204,8 @@
/* (user+group)*(old+new) structure, inode write (sb,
* inode block, ? - but truncate inode update has it) */
- handle = ext4_journal_start(inode, 2*(EXT4_QUOTA_INIT_BLOCKS(inode->i_sb)+
- EXT4_QUOTA_DEL_BLOCKS(inode->i_sb))+3);
+ handle = ext4_journal_start(inode, (EXT4_MAXQUOTAS_INIT_BLOCKS(inode->i_sb)+
+ EXT4_MAXQUOTAS_DEL_BLOCKS(inode->i_sb))+3);
if (IS_ERR(handle)) {
error = PTR_ERR(handle);
goto err_out;
@@ -5376,7 +5353,7 @@
* worse case, the indexs blocks spread over different block groups
*
* If datablocks are discontiguous, they are possible to spread over
- * different block groups too. If they are contiugous, with flexbg,
+ * different block groups too. If they are contiuguous, with flexbg,
* they could still across block group boundary.
*
* Also account for superblock, inode, quota and xattr blocks
@@ -5452,7 +5429,7 @@
* Calculate the journal credits for a chunk of data modification.
*
* This is called from DIO, fallocate or whoever calling
- * ext4_get_blocks() to map/allocate a chunk of contigous disk blocks.
+ * ext4_get_blocks() to map/allocate a chunk of contiguous disk blocks.
*
* journal buffers for data blocks are not included here, as DIO
* and fallocate do no need to journal data buffers.
diff --git a/fs/ext4/ioctl.c b/fs/ext4/ioctl.c
index c1cdf61..b63d193 100644
--- a/fs/ext4/ioctl.c
+++ b/fs/ext4/ioctl.c
@@ -221,31 +221,38 @@
struct file *donor_filp;
int err;
+ if (!(filp->f_mode & FMODE_READ) ||
+ !(filp->f_mode & FMODE_WRITE))
+ return -EBADF;
+
if (copy_from_user(&me,
(struct move_extent __user *)arg, sizeof(me)))
return -EFAULT;
+ me.moved_len = 0;
donor_filp = fget(me.donor_fd);
if (!donor_filp)
return -EBADF;
- if (!capable(CAP_DAC_OVERRIDE)) {
- if ((current->real_cred->fsuid != inode->i_uid) ||
- !(inode->i_mode & S_IRUSR) ||
- !(donor_filp->f_dentry->d_inode->i_mode &
- S_IRUSR)) {
- fput(donor_filp);
- return -EACCES;
- }
+ if (!(donor_filp->f_mode & FMODE_WRITE)) {
+ err = -EBADF;
+ goto mext_out;
}
+ err = mnt_want_write(filp->f_path.mnt);
+ if (err)
+ goto mext_out;
+
err = ext4_move_extents(filp, donor_filp, me.orig_start,
me.donor_start, me.len, &me.moved_len);
- fput(donor_filp);
+ mnt_drop_write(filp->f_path.mnt);
+ if (me.moved_len > 0)
+ file_remove_suid(donor_filp);
if (copy_to_user((struct move_extent *)arg, &me, sizeof(me)))
- return -EFAULT;
-
+ err = -EFAULT;
+mext_out:
+ fput(donor_filp);
return err;
}
diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c
index bba1282..c1e19d5 100644
--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -142,7 +142,7 @@
* 2 blocks and the order of allocation is >= sbi->s_mb_order2_reqs. The
* value of s_mb_order2_reqs can be tuned via
* /sys/fs/ext4/<partition>/mb_order2_req. If the request len is equal to
- * stripe size (sbi->s_stripe), we try to search for contigous block in
+ * stripe size (sbi->s_stripe), we try to search for contiguous block in
* stripe size. This should result in better allocation on RAID setups. If
* not, we search in the specific group using bitmap for best extents. The
* tunable min_to_scan and max_to_scan control the behaviour here.
@@ -2529,7 +2529,6 @@
struct ext4_group_info *db;
int err, count = 0, count2 = 0;
struct ext4_free_data *entry;
- ext4_fsblk_t discard_block;
struct list_head *l, *ltmp;
list_for_each_safe(l, ltmp, &txn->t_private_list) {
@@ -2559,13 +2558,19 @@
page_cache_release(e4b.bd_bitmap_page);
}
ext4_unlock_group(sb, entry->group);
- discard_block = (ext4_fsblk_t) entry->group * EXT4_BLOCKS_PER_GROUP(sb)
- + entry->start_blk
- + le32_to_cpu(EXT4_SB(sb)->s_es->s_first_data_block);
- trace_ext4_discard_blocks(sb, (unsigned long long)discard_block,
- entry->count);
- sb_issue_discard(sb, discard_block, entry->count);
+ if (test_opt(sb, DISCARD)) {
+ ext4_fsblk_t discard_block;
+ struct ext4_super_block *es = EXT4_SB(sb)->s_es;
+ discard_block = (ext4_fsblk_t)entry->group *
+ EXT4_BLOCKS_PER_GROUP(sb)
+ + entry->start_blk
+ + le32_to_cpu(es->s_first_data_block);
+ trace_ext4_discard_blocks(sb,
+ (unsigned long long)discard_block,
+ entry->count);
+ sb_issue_discard(sb, discard_block, entry->count);
+ }
kmem_cache_free(ext4_free_ext_cachep, entry);
ext4_mb_release_desc(&e4b);
}
@@ -3006,6 +3011,24 @@
}
/*
+ * Called on failure; free up any blocks from the inode PA for this
+ * context. We don't need this for MB_GROUP_PA because we only change
+ * pa_free in ext4_mb_release_context(), but on failure, we've already
+ * zeroed out ac->ac_b_ex.fe_len, so group_pa->pa_free is not changed.
+ */
+static void ext4_discard_allocated_blocks(struct ext4_allocation_context *ac)
+{
+ struct ext4_prealloc_space *pa = ac->ac_pa;
+ int len;
+
+ if (pa && pa->pa_type == MB_INODE_PA) {
+ len = ac->ac_b_ex.fe_len;
+ pa->pa_free += len;
+ }
+
+}
+
+/*
* use blocks preallocated to inode
*/
static void ext4_mb_use_inode_pa(struct ext4_allocation_context *ac,
@@ -4290,6 +4313,7 @@
ac->ac_status = AC_STATUS_CONTINUE;
goto repeat;
} else if (*errp) {
+ ext4_discard_allocated_blocks(ac);
ac->ac_b_ex.fe_len = 0;
ar->len = 0;
ext4_mb_show_ac(ac);
@@ -4422,18 +4446,24 @@
return 0;
}
-/*
- * Main entry point into mballoc to free blocks
+/**
+ * ext4_free_blocks() -- Free given blocks and update quota
+ * @handle: handle for this transaction
+ * @inode: inode
+ * @block: start physical block to free
+ * @count: number of blocks to count
+ * @metadata: Are these metadata blocks
*/
-void ext4_mb_free_blocks(handle_t *handle, struct inode *inode,
- ext4_fsblk_t block, unsigned long count,
- int metadata, unsigned long *freed)
+void ext4_free_blocks(handle_t *handle, struct inode *inode,
+ struct buffer_head *bh, ext4_fsblk_t block,
+ unsigned long count, int flags)
{
struct buffer_head *bitmap_bh = NULL;
struct super_block *sb = inode->i_sb;
struct ext4_allocation_context *ac = NULL;
struct ext4_group_desc *gdp;
struct ext4_super_block *es;
+ unsigned long freed = 0;
unsigned int overflow;
ext4_grpblk_t bit;
struct buffer_head *gd_bh;
@@ -4443,13 +4473,16 @@
int err = 0;
int ret;
- *freed = 0;
+ if (bh) {
+ if (block)
+ BUG_ON(block != bh->b_blocknr);
+ else
+ block = bh->b_blocknr;
+ }
sbi = EXT4_SB(sb);
es = EXT4_SB(sb)->s_es;
- if (block < le32_to_cpu(es->s_first_data_block) ||
- block + count < block ||
- block + count > ext4_blocks_count(es)) {
+ if (!ext4_data_block_valid(sbi, block, count)) {
ext4_error(sb, __func__,
"Freeing blocks not in datazone - "
"block = %llu, count = %lu", block, count);
@@ -4457,7 +4490,32 @@
}
ext4_debug("freeing block %llu\n", block);
- trace_ext4_free_blocks(inode, block, count, metadata);
+ trace_ext4_free_blocks(inode, block, count, flags);
+
+ if (flags & EXT4_FREE_BLOCKS_FORGET) {
+ struct buffer_head *tbh = bh;
+ int i;
+
+ BUG_ON(bh && (count > 1));
+
+ for (i = 0; i < count; i++) {
+ if (!bh)
+ tbh = sb_find_get_block(inode->i_sb,
+ block + i);
+ ext4_forget(handle, flags & EXT4_FREE_BLOCKS_METADATA,
+ inode, tbh, block + i);
+ }
+ }
+
+ /*
+ * We need to make sure we don't reuse the freed block until
+ * after the transaction is committed, which we can do by
+ * treating the block as metadata, below. We make an
+ * exception if the inode is to be written in writeback mode
+ * since writeback mode has weak data consistency guarantees.
+ */
+ if (!ext4_should_writeback_data(inode))
+ flags |= EXT4_FREE_BLOCKS_METADATA;
ac = kmem_cache_alloc(ext4_ac_cachep, GFP_NOFS);
if (ac) {
@@ -4533,7 +4591,8 @@
err = ext4_mb_load_buddy(sb, block_group, &e4b);
if (err)
goto error_return;
- if (metadata && ext4_handle_valid(handle)) {
+
+ if ((flags & EXT4_FREE_BLOCKS_METADATA) && ext4_handle_valid(handle)) {
struct ext4_free_data *new_entry;
/*
* blocks being freed are metadata. these blocks shouldn't
@@ -4572,7 +4631,7 @@
ext4_mb_release_desc(&e4b);
- *freed += count;
+ freed += count;
/* We dirtied the bitmap block */
BUFFER_TRACE(bitmap_bh, "dirtied bitmap block");
@@ -4592,6 +4651,8 @@
}
sb->s_dirt = 1;
error_return:
+ if (freed)
+ vfs_dq_free_block(inode, freed);
brelse(bitmap_bh);
ext4_std_error(sb, err);
if (ac)
diff --git a/fs/ext4/migrate.c b/fs/ext4/migrate.c
index a93d5b8..8141581 100644
--- a/fs/ext4/migrate.c
+++ b/fs/ext4/migrate.c
@@ -238,7 +238,7 @@
* So allocate a credit of 3. We may update
* quota (user and group).
*/
- needed = 3 + 2*EXT4_QUOTA_TRANS_BLOCKS(inode->i_sb);
+ needed = 3 + EXT4_MAXQUOTAS_TRANS_BLOCKS(inode->i_sb);
if (ext4_journal_extend(handle, needed) != 0)
retval = ext4_journal_restart(handle, needed);
@@ -262,13 +262,17 @@
for (i = 0; i < max_entries; i++) {
if (tmp_idata[i]) {
extend_credit_for_blkdel(handle, inode);
- ext4_free_blocks(handle, inode,
- le32_to_cpu(tmp_idata[i]), 1, 1);
+ ext4_free_blocks(handle, inode, 0,
+ le32_to_cpu(tmp_idata[i]), 1,
+ EXT4_FREE_BLOCKS_METADATA |
+ EXT4_FREE_BLOCKS_FORGET);
}
}
put_bh(bh);
extend_credit_for_blkdel(handle, inode);
- ext4_free_blocks(handle, inode, le32_to_cpu(i_data), 1, 1);
+ ext4_free_blocks(handle, inode, 0, le32_to_cpu(i_data), 1,
+ EXT4_FREE_BLOCKS_METADATA |
+ EXT4_FREE_BLOCKS_FORGET);
return 0;
}
@@ -297,7 +301,9 @@
}
put_bh(bh);
extend_credit_for_blkdel(handle, inode);
- ext4_free_blocks(handle, inode, le32_to_cpu(i_data), 1, 1);
+ ext4_free_blocks(handle, inode, 0, le32_to_cpu(i_data), 1,
+ EXT4_FREE_BLOCKS_METADATA |
+ EXT4_FREE_BLOCKS_FORGET);
return 0;
}
@@ -308,8 +314,10 @@
/* ei->i_data[EXT4_IND_BLOCK] */
if (i_data[0]) {
extend_credit_for_blkdel(handle, inode);
- ext4_free_blocks(handle, inode,
- le32_to_cpu(i_data[0]), 1, 1);
+ ext4_free_blocks(handle, inode, 0,
+ le32_to_cpu(i_data[0]), 1,
+ EXT4_FREE_BLOCKS_METADATA |
+ EXT4_FREE_BLOCKS_FORGET);
}
/* ei->i_data[EXT4_DIND_BLOCK] */
@@ -419,7 +427,8 @@
}
put_bh(bh);
extend_credit_for_blkdel(handle, inode);
- ext4_free_blocks(handle, inode, block, 1, 1);
+ ext4_free_blocks(handle, inode, 0, block, 1,
+ EXT4_FREE_BLOCKS_METADATA | EXT4_FREE_BLOCKS_FORGET);
return retval;
}
@@ -477,7 +486,7 @@
handle = ext4_journal_start(inode,
EXT4_DATA_TRANS_BLOCKS(inode->i_sb) +
EXT4_INDEX_EXTRA_TRANS_BLOCKS + 3 +
- 2 * EXT4_QUOTA_INIT_BLOCKS(inode->i_sb)
+ EXT4_MAXQUOTAS_INIT_BLOCKS(inode->i_sb)
+ 1);
if (IS_ERR(handle)) {
retval = PTR_ERR(handle);
diff --git a/fs/ext4/move_extent.c b/fs/ext4/move_extent.c
index 25b6b14..82c415b 100644
--- a/fs/ext4/move_extent.c
+++ b/fs/ext4/move_extent.c
@@ -77,12 +77,14 @@
mext_next_extent(struct inode *inode, struct ext4_ext_path *path,
struct ext4_extent **extent)
{
+ struct ext4_extent_header *eh;
int ppos, leaf_ppos = path->p_depth;
ppos = leaf_ppos;
if (EXT_LAST_EXTENT(path[ppos].p_hdr) > path[ppos].p_ext) {
/* leaf block */
*extent = ++path[ppos].p_ext;
+ path[ppos].p_block = ext_pblock(path[ppos].p_ext);
return 0;
}
@@ -119,9 +121,18 @@
ext_block_hdr(path[cur_ppos+1].p_bh);
}
+ path[leaf_ppos].p_ext = *extent = NULL;
+
+ eh = path[leaf_ppos].p_hdr;
+ if (le16_to_cpu(eh->eh_entries) == 0)
+ /* empty leaf is found */
+ return -ENODATA;
+
/* leaf block */
path[leaf_ppos].p_ext = *extent =
EXT_FIRST_EXTENT(path[leaf_ppos].p_hdr);
+ path[leaf_ppos].p_block =
+ ext_pblock(path[leaf_ppos].p_ext);
return 0;
}
}
@@ -155,40 +166,15 @@
}
/**
- * mext_double_down_read - Acquire two inodes' read semaphore
+ * double_down_write_data_sem - Acquire two inodes' write lock of i_data_sem
*
* @orig_inode: original inode structure
* @donor_inode: donor inode structure
- * Acquire read semaphore of the two inodes (orig and donor) by i_ino order.
+ * Acquire write lock of i_data_sem of the two inodes (orig and donor) by
+ * i_ino order.
*/
static void
-mext_double_down_read(struct inode *orig_inode, struct inode *donor_inode)
-{
- struct inode *first = orig_inode, *second = donor_inode;
-
- /*
- * Use the inode number to provide the stable locking order instead
- * of its address, because the C language doesn't guarantee you can
- * compare pointers that don't come from the same array.
- */
- if (donor_inode->i_ino < orig_inode->i_ino) {
- first = donor_inode;
- second = orig_inode;
- }
-
- down_read(&EXT4_I(first)->i_data_sem);
- down_read(&EXT4_I(second)->i_data_sem);
-}
-
-/**
- * mext_double_down_write - Acquire two inodes' write semaphore
- *
- * @orig_inode: original inode structure
- * @donor_inode: donor inode structure
- * Acquire write semaphore of the two inodes (orig and donor) by i_ino order.
- */
-static void
-mext_double_down_write(struct inode *orig_inode, struct inode *donor_inode)
+double_down_write_data_sem(struct inode *orig_inode, struct inode *donor_inode)
{
struct inode *first = orig_inode, *second = donor_inode;
@@ -203,32 +189,18 @@
}
down_write(&EXT4_I(first)->i_data_sem);
- down_write(&EXT4_I(second)->i_data_sem);
+ down_write_nested(&EXT4_I(second)->i_data_sem, SINGLE_DEPTH_NESTING);
}
/**
- * mext_double_up_read - Release two inodes' read semaphore
+ * double_up_write_data_sem - Release two inodes' write lock of i_data_sem
*
* @orig_inode: original inode structure to be released its lock first
* @donor_inode: donor inode structure to be released its lock second
- * Release read semaphore of two inodes (orig and donor).
+ * Release write lock of i_data_sem of two inodes (orig and donor).
*/
static void
-mext_double_up_read(struct inode *orig_inode, struct inode *donor_inode)
-{
- up_read(&EXT4_I(orig_inode)->i_data_sem);
- up_read(&EXT4_I(donor_inode)->i_data_sem);
-}
-
-/**
- * mext_double_up_write - Release two inodes' write semaphore
- *
- * @orig_inode: original inode structure to be released its lock first
- * @donor_inode: donor inode structure to be released its lock second
- * Release write semaphore of two inodes (orig and donor).
- */
-static void
-mext_double_up_write(struct inode *orig_inode, struct inode *donor_inode)
+double_up_write_data_sem(struct inode *orig_inode, struct inode *donor_inode)
{
up_write(&EXT4_I(orig_inode)->i_data_sem);
up_write(&EXT4_I(donor_inode)->i_data_sem);
@@ -596,7 +568,7 @@
* @tmp_oext: the extent that will belong to the donor inode
* @orig_off: block offset of original inode
* @donor_off: block offset of donor inode
- * @max_count: the maximun length of extents
+ * @max_count: the maximum length of extents
*
* Return 0 on success, or a negative error value on failure.
*/
@@ -661,6 +633,7 @@
* @donor_inode: donor inode
* @from: block offset of orig_inode
* @count: block count to be replaced
+ * @err: pointer to save return value
*
* Replace original inode extents and donor inode extents page by page.
* We implement this replacement in the following three steps:
@@ -671,33 +644,33 @@
* 3. Change the block information of donor inode to point at the saved
* original inode blocks in the dummy extents.
*
- * Return 0 on success, or a negative error value on failure.
+ * Return replaced block count.
*/
static int
mext_replace_branches(handle_t *handle, struct inode *orig_inode,
struct inode *donor_inode, ext4_lblk_t from,
- ext4_lblk_t count)
+ ext4_lblk_t count, int *err)
{
struct ext4_ext_path *orig_path = NULL;
struct ext4_ext_path *donor_path = NULL;
struct ext4_extent *oext, *dext;
struct ext4_extent tmp_dext, tmp_oext;
ext4_lblk_t orig_off = from, donor_off = from;
- int err = 0;
int depth;
int replaced_count = 0;
int dext_alen;
- mext_double_down_write(orig_inode, donor_inode);
+ /* Protect extent trees against block allocations via delalloc */
+ double_down_write_data_sem(orig_inode, donor_inode);
/* Get the original extent for the block "orig_off" */
- err = get_ext_path(orig_inode, orig_off, &orig_path);
- if (err)
+ *err = get_ext_path(orig_inode, orig_off, &orig_path);
+ if (*err)
goto out;
/* Get the donor extent for the head */
- err = get_ext_path(donor_inode, donor_off, &donor_path);
- if (err)
+ *err = get_ext_path(donor_inode, donor_off, &donor_path);
+ if (*err)
goto out;
depth = ext_depth(orig_inode);
oext = orig_path[depth].p_ext;
@@ -707,9 +680,9 @@
dext = donor_path[depth].p_ext;
tmp_dext = *dext;
- err = mext_calc_swap_extents(&tmp_dext, &tmp_oext, orig_off,
+ *err = mext_calc_swap_extents(&tmp_dext, &tmp_oext, orig_off,
donor_off, count);
- if (err)
+ if (*err)
goto out;
/* Loop for the donor extents */
@@ -718,7 +691,7 @@
if (!dext) {
ext4_error(donor_inode->i_sb, __func__,
"The extent for donor must be found");
- err = -EIO;
+ *err = -EIO;
goto out;
} else if (donor_off != le32_to_cpu(tmp_dext.ee_block)) {
ext4_error(donor_inode->i_sb, __func__,
@@ -726,20 +699,20 @@
"extent(%u) should be equal",
donor_off,
le32_to_cpu(tmp_dext.ee_block));
- err = -EIO;
+ *err = -EIO;
goto out;
}
/* Set donor extent to orig extent */
- err = mext_leaf_block(handle, orig_inode,
+ *err = mext_leaf_block(handle, orig_inode,
orig_path, &tmp_dext, &orig_off);
- if (err < 0)
+ if (*err)
goto out;
/* Set orig extent to donor extent */
- err = mext_leaf_block(handle, donor_inode,
+ *err = mext_leaf_block(handle, donor_inode,
donor_path, &tmp_oext, &donor_off);
- if (err < 0)
+ if (*err)
goto out;
dext_alen = ext4_ext_get_actual_len(&tmp_dext);
@@ -753,35 +726,25 @@
if (orig_path)
ext4_ext_drop_refs(orig_path);
- err = get_ext_path(orig_inode, orig_off, &orig_path);
- if (err)
+ *err = get_ext_path(orig_inode, orig_off, &orig_path);
+ if (*err)
goto out;
depth = ext_depth(orig_inode);
oext = orig_path[depth].p_ext;
- if (le32_to_cpu(oext->ee_block) +
- ext4_ext_get_actual_len(oext) <= orig_off) {
- err = 0;
- goto out;
- }
tmp_oext = *oext;
if (donor_path)
ext4_ext_drop_refs(donor_path);
- err = get_ext_path(donor_inode, donor_off, &donor_path);
- if (err)
+ *err = get_ext_path(donor_inode, donor_off, &donor_path);
+ if (*err)
goto out;
depth = ext_depth(donor_inode);
dext = donor_path[depth].p_ext;
- if (le32_to_cpu(dext->ee_block) +
- ext4_ext_get_actual_len(dext) <= donor_off) {
- err = 0;
- goto out;
- }
tmp_dext = *dext;
- err = mext_calc_swap_extents(&tmp_dext, &tmp_oext, orig_off,
+ *err = mext_calc_swap_extents(&tmp_dext, &tmp_oext, orig_off,
donor_off, count - replaced_count);
- if (err)
+ if (*err)
goto out;
}
@@ -795,8 +758,12 @@
kfree(donor_path);
}
- mext_double_up_write(orig_inode, donor_inode);
- return err;
+ ext4_ext_invalidate_cache(orig_inode);
+ ext4_ext_invalidate_cache(donor_inode);
+
+ double_up_write_data_sem(orig_inode, donor_inode);
+
+ return replaced_count;
}
/**
@@ -808,16 +775,17 @@
* @data_offset_in_page: block index where data swapping starts
* @block_len_in_page: the number of blocks to be swapped
* @uninit: orig extent is uninitialized or not
+ * @err: pointer to save return value
*
* Save the data in original inode blocks and replace original inode extents
* with donor inode extents by calling mext_replace_branches().
- * Finally, write out the saved data in new original inode blocks. Return 0
- * on success, or a negative error value on failure.
+ * Finally, write out the saved data in new original inode blocks. Return
+ * replaced block count.
*/
static int
move_extent_per_page(struct file *o_filp, struct inode *donor_inode,
pgoff_t orig_page_offset, int data_offset_in_page,
- int block_len_in_page, int uninit)
+ int block_len_in_page, int uninit, int *err)
{
struct inode *orig_inode = o_filp->f_dentry->d_inode;
struct address_space *mapping = orig_inode->i_mapping;
@@ -829,9 +797,11 @@
long long offs = orig_page_offset << PAGE_CACHE_SHIFT;
unsigned long blocksize = orig_inode->i_sb->s_blocksize;
unsigned int w_flags = 0;
- unsigned int tmp_data_len, data_len;
+ unsigned int tmp_data_size, data_size, replaced_size;
void *fsdata;
- int ret, i, jblocks;
+ int i, jblocks;
+ int err2 = 0;
+ int replaced_count = 0;
int blocks_per_page = PAGE_CACHE_SIZE >> orig_inode->i_blkbits;
/*
@@ -841,8 +811,8 @@
jblocks = ext4_writepage_trans_blocks(orig_inode) * 2;
handle = ext4_journal_start(orig_inode, jblocks);
if (IS_ERR(handle)) {
- ret = PTR_ERR(handle);
- return ret;
+ *err = PTR_ERR(handle);
+ return 0;
}
if (segment_eq(get_fs(), KERNEL_DS))
@@ -858,39 +828,36 @@
* Just swap data blocks between orig and donor.
*/
if (uninit) {
- ret = mext_replace_branches(handle, orig_inode,
- donor_inode, orig_blk_offset,
- block_len_in_page);
-
- /* Clear the inode cache not to refer to the old data */
- ext4_ext_invalidate_cache(orig_inode);
- ext4_ext_invalidate_cache(donor_inode);
+ replaced_count = mext_replace_branches(handle, orig_inode,
+ donor_inode, orig_blk_offset,
+ block_len_in_page, err);
goto out2;
}
offs = (long long)orig_blk_offset << orig_inode->i_blkbits;
- /* Calculate data_len */
+ /* Calculate data_size */
if ((orig_blk_offset + block_len_in_page - 1) ==
((orig_inode->i_size - 1) >> orig_inode->i_blkbits)) {
/* Replace the last block */
- tmp_data_len = orig_inode->i_size & (blocksize - 1);
+ tmp_data_size = orig_inode->i_size & (blocksize - 1);
/*
- * If data_len equal zero, it shows data_len is multiples of
+ * If data_size equal zero, it shows data_size is multiples of
* blocksize. So we set appropriate value.
*/
- if (tmp_data_len == 0)
- tmp_data_len = blocksize;
+ if (tmp_data_size == 0)
+ tmp_data_size = blocksize;
- data_len = tmp_data_len +
+ data_size = tmp_data_size +
((block_len_in_page - 1) << orig_inode->i_blkbits);
- } else {
- data_len = block_len_in_page << orig_inode->i_blkbits;
- }
+ } else
+ data_size = block_len_in_page << orig_inode->i_blkbits;
- ret = a_ops->write_begin(o_filp, mapping, offs, data_len, w_flags,
+ replaced_size = data_size;
+
+ *err = a_ops->write_begin(o_filp, mapping, offs, data_size, w_flags,
&page, &fsdata);
- if (unlikely(ret < 0))
+ if (unlikely(*err < 0))
goto out;
if (!PageUptodate(page)) {
@@ -911,14 +878,17 @@
/* Release old bh and drop refs */
try_to_release_page(page, 0);
- ret = mext_replace_branches(handle, orig_inode, donor_inode,
- orig_blk_offset, block_len_in_page);
- if (ret < 0)
- goto out;
-
- /* Clear the inode cache not to refer to the old data */
- ext4_ext_invalidate_cache(orig_inode);
- ext4_ext_invalidate_cache(donor_inode);
+ replaced_count = mext_replace_branches(handle, orig_inode, donor_inode,
+ orig_blk_offset, block_len_in_page,
+ &err2);
+ if (err2) {
+ if (replaced_count) {
+ block_len_in_page = replaced_count;
+ replaced_size =
+ block_len_in_page << orig_inode->i_blkbits;
+ } else
+ goto out;
+ }
if (!page_has_buffers(page))
create_empty_buffers(page, 1 << orig_inode->i_blkbits, 0);
@@ -928,16 +898,16 @@
bh = bh->b_this_page;
for (i = 0; i < block_len_in_page; i++) {
- ret = ext4_get_block(orig_inode,
+ *err = ext4_get_block(orig_inode,
(sector_t)(orig_blk_offset + i), bh, 0);
- if (ret < 0)
+ if (*err < 0)
goto out;
if (bh->b_this_page != NULL)
bh = bh->b_this_page;
}
- ret = a_ops->write_end(o_filp, mapping, offs, data_len, data_len,
+ *err = a_ops->write_end(o_filp, mapping, offs, data_size, replaced_size,
page, fsdata);
page = NULL;
@@ -951,7 +921,10 @@
out2:
ext4_journal_stop(handle);
- return ret < 0 ? ret : 0;
+ if (err2)
+ *err = err2;
+
+ return replaced_count;
}
/**
@@ -962,7 +935,6 @@
* @orig_start: logical start offset in block for orig
* @donor_start: logical start offset in block for donor
* @len: the number of blocks to be moved
- * @moved_len: moved block length
*
* Check the arguments of ext4_move_extents() whether the files can be
* exchanged with each other.
@@ -970,8 +942,8 @@
*/
static int
mext_check_arguments(struct inode *orig_inode,
- struct inode *donor_inode, __u64 orig_start,
- __u64 donor_start, __u64 *len, __u64 moved_len)
+ struct inode *donor_inode, __u64 orig_start,
+ __u64 donor_start, __u64 *len)
{
ext4_lblk_t orig_blocks, donor_blocks;
unsigned int blkbits = orig_inode->i_blkbits;
@@ -985,6 +957,13 @@
return -EINVAL;
}
+ if (donor_inode->i_mode & (S_ISUID|S_ISGID)) {
+ ext4_debug("ext4 move extent: suid or sgid is set"
+ " to donor file [ino:orig %lu, donor %lu]\n",
+ orig_inode->i_ino, donor_inode->i_ino);
+ return -EINVAL;
+ }
+
/* Ext4 move extent does not support swapfile */
if (IS_SWAPFILE(orig_inode) || IS_SWAPFILE(donor_inode)) {
ext4_debug("ext4 move extent: The argument files should "
@@ -1025,13 +1004,6 @@
return -EINVAL;
}
- if (moved_len) {
- ext4_debug("ext4 move extent: moved_len should be 0 "
- "[ino:orig %lu, donor %lu]\n", orig_inode->i_ino,
- donor_inode->i_ino);
- return -EINVAL;
- }
-
if ((orig_start > EXT_MAX_BLOCK) ||
(donor_start > EXT_MAX_BLOCK) ||
(*len > EXT_MAX_BLOCK) ||
@@ -1088,7 +1060,7 @@
}
if (!*len) {
- ext4_debug("ext4 move extent: len shoudld not be 0 "
+ ext4_debug("ext4 move extent: len should not be 0 "
"[ino:orig %lu, donor %lu]\n", orig_inode->i_ino,
donor_inode->i_ino);
return -EINVAL;
@@ -1232,16 +1204,16 @@
return -EINVAL;
}
- /* protect orig and donor against a truncate */
+ /* Protect orig and donor inodes against a truncate */
ret1 = mext_inode_double_lock(orig_inode, donor_inode);
if (ret1 < 0)
return ret1;
- mext_double_down_read(orig_inode, donor_inode);
+ /* Protect extent tree against block allocations via delalloc */
+ double_down_write_data_sem(orig_inode, donor_inode);
/* Check the filesystem environment whether move_extent can be done */
ret1 = mext_check_arguments(orig_inode, donor_inode, orig_start,
- donor_start, &len, *moved_len);
- mext_double_up_read(orig_inode, donor_inode);
+ donor_start, &len);
if (ret1)
goto out;
@@ -1355,36 +1327,39 @@
seq_start = le32_to_cpu(ext_cur->ee_block);
rest_blocks = seq_blocks;
- /* Discard preallocations of two inodes */
- down_write(&EXT4_I(orig_inode)->i_data_sem);
- ext4_discard_preallocations(orig_inode);
- up_write(&EXT4_I(orig_inode)->i_data_sem);
-
- down_write(&EXT4_I(donor_inode)->i_data_sem);
- ext4_discard_preallocations(donor_inode);
- up_write(&EXT4_I(donor_inode)->i_data_sem);
+ /*
+ * Up semaphore to avoid following problems:
+ * a. transaction deadlock among ext4_journal_start,
+ * ->write_begin via pagefault, and jbd2_journal_commit
+ * b. racing with ->readpage, ->write_begin, and ext4_get_block
+ * in move_extent_per_page
+ */
+ double_up_write_data_sem(orig_inode, donor_inode);
while (orig_page_offset <= seq_end_page) {
/* Swap original branches with new branches */
- ret1 = move_extent_per_page(o_filp, donor_inode,
+ block_len_in_page = move_extent_per_page(
+ o_filp, donor_inode,
orig_page_offset,
data_offset_in_page,
- block_len_in_page, uninit);
- if (ret1 < 0)
- goto out;
- orig_page_offset++;
+ block_len_in_page, uninit,
+ &ret1);
+
/* Count how many blocks we have exchanged */
*moved_len += block_len_in_page;
+ if (ret1 < 0)
+ break;
if (*moved_len > len) {
ext4_error(orig_inode->i_sb, __func__,
"We replaced blocks too much! "
"sum of replaced: %llu requested: %llu",
*moved_len, len);
ret1 = -EIO;
- goto out;
+ break;
}
+ orig_page_offset++;
data_offset_in_page = 0;
rest_blocks -= block_len_in_page;
if (rest_blocks > blocks_per_page)
@@ -1393,6 +1368,10 @@
block_len_in_page = rest_blocks;
}
+ double_down_write_data_sem(orig_inode, donor_inode);
+ if (ret1 < 0)
+ break;
+
/* Decrease buffer counter */
if (holecheck_path)
ext4_ext_drop_refs(holecheck_path);
@@ -1414,6 +1393,11 @@
}
out:
+ if (*moved_len) {
+ ext4_discard_preallocations(orig_inode);
+ ext4_discard_preallocations(donor_inode);
+ }
+
if (orig_path) {
ext4_ext_drop_refs(orig_path);
kfree(orig_path);
@@ -1422,7 +1406,7 @@
ext4_ext_drop_refs(holecheck_path);
kfree(holecheck_path);
}
-
+ double_up_write_data_sem(orig_inode, donor_inode);
ret2 = mext_inode_double_unlock(orig_inode, donor_inode);
if (ret1)
diff --git a/fs/ext4/namei.c b/fs/ext4/namei.c
index 6d2c1b8..17a17e1 100644
--- a/fs/ext4/namei.c
+++ b/fs/ext4/namei.c
@@ -1292,9 +1292,6 @@
* add_dirent_to_buf will attempt search the directory block for
* space. It will return -ENOSPC if no space is available, and -EIO
* and -EEXIST if directory entry already exists.
- *
- * NOTE! bh is NOT released in the case where ENOSPC is returned. In
- * all other cases bh is released.
*/
static int add_dirent_to_buf(handle_t *handle, struct dentry *dentry,
struct inode *inode, struct ext4_dir_entry_2 *de,
@@ -1315,14 +1312,10 @@
top = bh->b_data + blocksize - reclen;
while ((char *) de <= top) {
if (!ext4_check_dir_entry("ext4_add_entry", dir, de,
- bh, offset)) {
- brelse(bh);
+ bh, offset))
return -EIO;
- }
- if (ext4_match(namelen, name, de)) {
- brelse(bh);
+ if (ext4_match(namelen, name, de))
return -EEXIST;
- }
nlen = EXT4_DIR_REC_LEN(de->name_len);
rlen = ext4_rec_len_from_disk(de->rec_len, blocksize);
if ((de->inode? rlen - nlen: rlen) >= reclen)
@@ -1337,7 +1330,6 @@
err = ext4_journal_get_write_access(handle, bh);
if (err) {
ext4_std_error(dir->i_sb, err);
- brelse(bh);
return err;
}
@@ -1377,7 +1369,6 @@
err = ext4_handle_dirty_metadata(handle, dir, bh);
if (err)
ext4_std_error(dir->i_sb, err);
- brelse(bh);
return 0;
}
@@ -1471,7 +1462,9 @@
if (!(de))
return retval;
- return add_dirent_to_buf(handle, dentry, inode, de, bh);
+ retval = add_dirent_to_buf(handle, dentry, inode, de, bh);
+ brelse(bh);
+ return retval;
}
/*
@@ -1514,8 +1507,10 @@
if(!bh)
return retval;
retval = add_dirent_to_buf(handle, dentry, inode, NULL, bh);
- if (retval != -ENOSPC)
+ if (retval != -ENOSPC) {
+ brelse(bh);
return retval;
+ }
if (blocks == 1 && !dx_fallback &&
EXT4_HAS_COMPAT_FEATURE(sb, EXT4_FEATURE_COMPAT_DIR_INDEX))
@@ -1528,7 +1523,9 @@
de = (struct ext4_dir_entry_2 *) bh->b_data;
de->inode = 0;
de->rec_len = ext4_rec_len_to_disk(blocksize, blocksize);
- return add_dirent_to_buf(handle, dentry, inode, de, bh);
+ retval = add_dirent_to_buf(handle, dentry, inode, de, bh);
+ brelse(bh);
+ return retval;
}
/*
@@ -1561,10 +1558,8 @@
goto journal_error;
err = add_dirent_to_buf(handle, dentry, inode, NULL, bh);
- if (err != -ENOSPC) {
- bh = NULL;
+ if (err != -ENOSPC)
goto cleanup;
- }
/* Block full, should compress but for now just split */
dxtrace(printk(KERN_DEBUG "using %u of %u node entries\n",
@@ -1657,7 +1652,6 @@
if (!de)
goto cleanup;
err = add_dirent_to_buf(handle, dentry, inode, de, bh);
- bh = NULL;
goto cleanup;
journal_error:
@@ -1775,7 +1769,7 @@
retry:
handle = ext4_journal_start(dir, EXT4_DATA_TRANS_BLOCKS(dir->i_sb) +
EXT4_INDEX_EXTRA_TRANS_BLOCKS + 3 +
- 2*EXT4_QUOTA_INIT_BLOCKS(dir->i_sb));
+ EXT4_MAXQUOTAS_INIT_BLOCKS(dir->i_sb));
if (IS_ERR(handle))
return PTR_ERR(handle);
@@ -1809,7 +1803,7 @@
retry:
handle = ext4_journal_start(dir, EXT4_DATA_TRANS_BLOCKS(dir->i_sb) +
EXT4_INDEX_EXTRA_TRANS_BLOCKS + 3 +
- 2*EXT4_QUOTA_INIT_BLOCKS(dir->i_sb));
+ EXT4_MAXQUOTAS_INIT_BLOCKS(dir->i_sb));
if (IS_ERR(handle))
return PTR_ERR(handle);
@@ -1846,7 +1840,7 @@
retry:
handle = ext4_journal_start(dir, EXT4_DATA_TRANS_BLOCKS(dir->i_sb) +
EXT4_INDEX_EXTRA_TRANS_BLOCKS + 3 +
- 2*EXT4_QUOTA_INIT_BLOCKS(dir->i_sb));
+ EXT4_MAXQUOTAS_INIT_BLOCKS(dir->i_sb));
if (IS_ERR(handle))
return PTR_ERR(handle);
@@ -2259,7 +2253,7 @@
retry:
handle = ext4_journal_start(dir, EXT4_DATA_TRANS_BLOCKS(dir->i_sb) +
EXT4_INDEX_EXTRA_TRANS_BLOCKS + 5 +
- 2*EXT4_QUOTA_INIT_BLOCKS(dir->i_sb));
+ EXT4_MAXQUOTAS_INIT_BLOCKS(dir->i_sb));
if (IS_ERR(handle))
return PTR_ERR(handle);
diff --git a/fs/ext4/resize.c b/fs/ext4/resize.c
index 3cfc343..3b2c554 100644
--- a/fs/ext4/resize.c
+++ b/fs/ext4/resize.c
@@ -247,7 +247,7 @@
goto exit_bh;
if (IS_ERR(gdb = bclean(handle, sb, block))) {
- err = PTR_ERR(bh);
+ err = PTR_ERR(gdb);
goto exit_bh;
}
ext4_handle_dirty_metadata(handle, NULL, gdb);
diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index d4ca92a..8b58a14 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -603,10 +603,6 @@
if (sb->s_dirt)
ext4_commit_super(sb, 1);
- ext4_release_system_zone(sb);
- ext4_mb_release(sb);
- ext4_ext_release(sb);
- ext4_xattr_put_super(sb);
if (sbi->s_journal) {
err = jbd2_journal_destroy(sbi->s_journal);
sbi->s_journal = NULL;
@@ -614,6 +610,12 @@
ext4_abort(sb, __func__,
"Couldn't clean up the journal");
}
+
+ ext4_release_system_zone(sb);
+ ext4_mb_release(sb);
+ ext4_ext_release(sb);
+ ext4_xattr_put_super(sb);
+
if (!(sb->s_flags & MS_RDONLY)) {
EXT4_CLEAR_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_RECOVER);
es->s_state = cpu_to_le16(sbi->s_mount_state);
@@ -704,6 +706,8 @@
spin_lock_init(&(ei->i_block_reservation_lock));
INIT_LIST_HEAD(&ei->i_aio_dio_complete_list);
ei->cur_aio_dio = NULL;
+ ei->i_sync_tid = 0;
+ ei->i_datasync_tid = 0;
return &ei->vfs_inode;
}
@@ -899,6 +903,12 @@
if (test_opt(sb, NO_AUTO_DA_ALLOC))
seq_puts(seq, ",noauto_da_alloc");
+ if (test_opt(sb, DISCARD))
+ seq_puts(seq, ",discard");
+
+ if (test_opt(sb, NOLOAD))
+ seq_puts(seq, ",norecovery");
+
ext4_show_quota_options(seq, sb);
return 0;
@@ -1079,7 +1089,8 @@
Opt_usrquota, Opt_grpquota, Opt_i_version,
Opt_stripe, Opt_delalloc, Opt_nodelalloc,
Opt_block_validity, Opt_noblock_validity,
- Opt_inode_readahead_blks, Opt_journal_ioprio
+ Opt_inode_readahead_blks, Opt_journal_ioprio,
+ Opt_discard, Opt_nodiscard,
};
static const match_table_t tokens = {
@@ -1104,6 +1115,7 @@
{Opt_acl, "acl"},
{Opt_noacl, "noacl"},
{Opt_noload, "noload"},
+ {Opt_noload, "norecovery"},
{Opt_nobh, "nobh"},
{Opt_bh, "bh"},
{Opt_commit, "commit=%u"},
@@ -1144,6 +1156,8 @@
{Opt_auto_da_alloc, "auto_da_alloc=%u"},
{Opt_auto_da_alloc, "auto_da_alloc"},
{Opt_noauto_da_alloc, "noauto_da_alloc"},
+ {Opt_discard, "discard"},
+ {Opt_nodiscard, "nodiscard"},
{Opt_err, NULL},
};
@@ -1565,6 +1579,12 @@
else
set_opt(sbi->s_mount_opt,NO_AUTO_DA_ALLOC);
break;
+ case Opt_discard:
+ set_opt(sbi->s_mount_opt, DISCARD);
+ break;
+ case Opt_nodiscard:
+ clear_opt(sbi->s_mount_opt, DISCARD);
+ break;
default:
ext4_msg(sb, KERN_ERR,
"Unrecognized mount option \"%s\" "
@@ -1673,14 +1693,14 @@
size_t size;
int i;
- if (!sbi->s_es->s_log_groups_per_flex) {
+ sbi->s_log_groups_per_flex = sbi->s_es->s_log_groups_per_flex;
+ groups_per_flex = 1 << sbi->s_log_groups_per_flex;
+
+ if (groups_per_flex < 2) {
sbi->s_log_groups_per_flex = 0;
return 1;
}
- sbi->s_log_groups_per_flex = sbi->s_es->s_log_groups_per_flex;
- groups_per_flex = 1 << sbi->s_log_groups_per_flex;
-
/* We allocate both existing and potentially added groups */
flex_group_count = ((sbi->s_groups_count + groups_per_flex - 1) +
((le16_to_cpu(sbi->s_es->s_reserved_gdt_blocks) + 1) <<
@@ -2721,26 +2741,6 @@
EXT4_HAS_COMPAT_FEATURE(sb, EXT4_FEATURE_COMPAT_HAS_JOURNAL)) {
if (ext4_load_journal(sb, es, journal_devnum))
goto failed_mount3;
- if (!(sb->s_flags & MS_RDONLY) &&
- EXT4_SB(sb)->s_journal->j_failed_commit) {
- ext4_msg(sb, KERN_CRIT, "error: "
- "ext4_fill_super: Journal transaction "
- "%u is corrupt",
- EXT4_SB(sb)->s_journal->j_failed_commit);
- if (test_opt(sb, ERRORS_RO)) {
- ext4_msg(sb, KERN_CRIT,
- "Mounting filesystem read-only");
- sb->s_flags |= MS_RDONLY;
- EXT4_SB(sb)->s_mount_state |= EXT4_ERROR_FS;
- es->s_state |= cpu_to_le16(EXT4_ERROR_FS);
- }
- if (test_opt(sb, ERRORS_PANIC)) {
- EXT4_SB(sb)->s_mount_state |= EXT4_ERROR_FS;
- es->s_state |= cpu_to_le16(EXT4_ERROR_FS);
- ext4_commit_super(sb, 1);
- goto failed_mount4;
- }
- }
} else if (test_opt(sb, NOLOAD) && !(sb->s_flags & MS_RDONLY) &&
EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_RECOVER)) {
ext4_msg(sb, KERN_ERR, "required journal recovery "
@@ -3668,13 +3668,11 @@
buf->f_blocks = ext4_blocks_count(es) - sbi->s_overhead_last;
buf->f_bfree = percpu_counter_sum_positive(&sbi->s_freeblocks_counter) -
percpu_counter_sum_positive(&sbi->s_dirtyblocks_counter);
- ext4_free_blocks_count_set(es, buf->f_bfree);
buf->f_bavail = buf->f_bfree - ext4_r_blocks_count(es);
if (buf->f_bfree < ext4_r_blocks_count(es))
buf->f_bavail = 0;
buf->f_files = le32_to_cpu(es->s_inodes_count);
buf->f_ffree = percpu_counter_sum_positive(&sbi->s_freeinodes_counter);
- es->s_free_inodes_count = cpu_to_le32(buf->f_ffree);
buf->f_namelen = EXT4_NAME_LEN;
fsid = le64_to_cpup((void *)es->s_uuid) ^
le64_to_cpup((void *)es->s_uuid + sizeof(u64));
@@ -3966,6 +3964,58 @@
return get_sb_bdev(fs_type, flags, dev_name, data, ext4_fill_super,mnt);
}
+#if !defined(CONTIG_EXT2_FS) && !defined(CONFIG_EXT2_FS_MODULE) && defined(CONFIG_EXT4_USE_FOR_EXT23)
+static struct file_system_type ext2_fs_type = {
+ .owner = THIS_MODULE,
+ .name = "ext2",
+ .get_sb = ext4_get_sb,
+ .kill_sb = kill_block_super,
+ .fs_flags = FS_REQUIRES_DEV,
+};
+
+static inline void register_as_ext2(void)
+{
+ int err = register_filesystem(&ext2_fs_type);
+ if (err)
+ printk(KERN_WARNING
+ "EXT4-fs: Unable to register as ext2 (%d)\n", err);
+}
+
+static inline void unregister_as_ext2(void)
+{
+ unregister_filesystem(&ext2_fs_type);
+}
+#else
+static inline void register_as_ext2(void) { }
+static inline void unregister_as_ext2(void) { }
+#endif
+
+#if !defined(CONTIG_EXT3_FS) && !defined(CONFIG_EXT3_FS_MODULE) && defined(CONFIG_EXT4_USE_FOR_EXT23)
+static struct file_system_type ext3_fs_type = {
+ .owner = THIS_MODULE,
+ .name = "ext3",
+ .get_sb = ext4_get_sb,
+ .kill_sb = kill_block_super,
+ .fs_flags = FS_REQUIRES_DEV,
+};
+
+static inline void register_as_ext3(void)
+{
+ int err = register_filesystem(&ext3_fs_type);
+ if (err)
+ printk(KERN_WARNING
+ "EXT4-fs: Unable to register as ext3 (%d)\n", err);
+}
+
+static inline void unregister_as_ext3(void)
+{
+ unregister_filesystem(&ext3_fs_type);
+}
+#else
+static inline void register_as_ext3(void) { }
+static inline void unregister_as_ext3(void) { }
+#endif
+
static struct file_system_type ext4_fs_type = {
.owner = THIS_MODULE,
.name = "ext4",
@@ -3995,11 +4045,15 @@
err = init_inodecache();
if (err)
goto out1;
+ register_as_ext2();
+ register_as_ext3();
err = register_filesystem(&ext4_fs_type);
if (err)
goto out;
return 0;
out:
+ unregister_as_ext2();
+ unregister_as_ext3();
destroy_inodecache();
out1:
exit_ext4_xattr();
@@ -4015,6 +4069,8 @@
static void __exit exit_ext4_fs(void)
{
+ unregister_as_ext2();
+ unregister_as_ext3();
unregister_filesystem(&ext4_fs_type);
destroy_inodecache();
exit_ext4_xattr();
diff --git a/fs/ext4/xattr.c b/fs/ext4/xattr.c
index fed5b01..910bf9a 100644
--- a/fs/ext4/xattr.c
+++ b/fs/ext4/xattr.c
@@ -482,9 +482,10 @@
ea_bdebug(bh, "refcount now=0; freeing");
if (ce)
mb_cache_entry_free(ce);
- ext4_free_blocks(handle, inode, bh->b_blocknr, 1, 1);
get_bh(bh);
- ext4_forget(handle, 1, inode, bh, bh->b_blocknr);
+ ext4_free_blocks(handle, inode, bh, 0, 1,
+ EXT4_FREE_BLOCKS_METADATA |
+ EXT4_FREE_BLOCKS_FORGET);
} else {
le32_add_cpu(&BHDR(bh)->h_refcount, -1);
error = ext4_handle_dirty_metadata(handle, inode, bh);
@@ -832,7 +833,8 @@
new_bh = sb_getblk(sb, block);
if (!new_bh) {
getblk_failed:
- ext4_free_blocks(handle, inode, block, 1, 1);
+ ext4_free_blocks(handle, inode, 0, block, 1,
+ EXT4_FREE_BLOCKS_METADATA);
error = -EIO;
goto cleanup;
}
@@ -988,6 +990,10 @@
if (error)
goto cleanup;
+ error = ext4_journal_get_write_access(handle, is.iloc.bh);
+ if (error)
+ goto cleanup;
+
if (EXT4_I(inode)->i_state & EXT4_STATE_NEW) {
struct ext4_inode *raw_inode = ext4_raw_inode(&is.iloc);
memset(raw_inode, 0, EXT4_SB(inode->i_sb)->s_inode_size);
@@ -1013,9 +1019,6 @@
if (flags & XATTR_CREATE)
goto cleanup;
}
- error = ext4_journal_get_write_access(handle, is.iloc.bh);
- if (error)
- goto cleanup;
if (!value) {
if (!is.s.not_found)
error = ext4_xattr_ibody_set(handle, inode, &i, &is);
diff --git a/fs/jbd2/commit.c b/fs/jbd2/commit.c
index d4cfd6d..8896c1d 100644
--- a/fs/jbd2/commit.c
+++ b/fs/jbd2/commit.c
@@ -636,6 +636,10 @@
JBUFFER_TRACE(jh, "ph3: write metadata");
flags = jbd2_journal_write_metadata_buffer(commit_transaction,
jh, &new_jh, blocknr);
+ if (flags < 0) {
+ jbd2_journal_abort(journal, flags);
+ continue;
+ }
set_bit(BH_JWrite, &jh2bh(new_jh)->b_state);
wbuf[bufs++] = jh2bh(new_jh);
diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c
index fed85388..b7ca3a9 100644
--- a/fs/jbd2/journal.c
+++ b/fs/jbd2/journal.c
@@ -78,6 +78,7 @@
EXPORT_SYMBOL(jbd2_journal_ack_err);
EXPORT_SYMBOL(jbd2_journal_clear_err);
EXPORT_SYMBOL(jbd2_log_wait_commit);
+EXPORT_SYMBOL(jbd2_log_start_commit);
EXPORT_SYMBOL(jbd2_journal_start_commit);
EXPORT_SYMBOL(jbd2_journal_force_commit_nested);
EXPORT_SYMBOL(jbd2_journal_wipe);
@@ -358,6 +359,10 @@
jbd_unlock_bh_state(bh_in);
tmp = jbd2_alloc(bh_in->b_size, GFP_NOFS);
+ if (!tmp) {
+ jbd2_journal_put_journal_head(new_jh);
+ return -ENOMEM;
+ }
jbd_lock_bh_state(bh_in);
if (jh_in->b_frozen_data) {
jbd2_free(tmp, bh_in->b_size);
@@ -1248,6 +1253,13 @@
if (jbd2_journal_recover(journal))
goto recovery_error;
+ if (journal->j_failed_commit) {
+ printk(KERN_ERR "JBD2: journal transaction %u on %s "
+ "is corrupt.\n", journal->j_failed_commit,
+ journal->j_devname);
+ return -EIO;
+ }
+
/* OK, we've finished with the dynamic journal bits:
* reinitialise the dynamic contents of the superblock in memory
* and reset them on disk. */
diff --git a/fs/jffs2/compr.c b/fs/jffs2/compr.c
index f25e70c..f029441 100644
--- a/fs/jffs2/compr.c
+++ b/fs/jffs2/compr.c
@@ -177,7 +177,7 @@
spin_unlock(&jffs2_compressor_list_lock);
break;
default:
- printk(KERN_ERR "JFFS2: unknow compression mode.\n");
+ printk(KERN_ERR "JFFS2: unknown compression mode.\n");
}
out:
if (ret == JFFS2_COMPR_NONE) {
diff --git a/fs/jffs2/readinode.c b/fs/jffs2/readinode.c
index 1a80301..378991c 100644
--- a/fs/jffs2/readinode.c
+++ b/fs/jffs2/readinode.c
@@ -931,7 +931,7 @@
* Helper function for jffs2_get_inode_nodes().
* The function detects whether more data should be read and reads it if yes.
*
- * Returns: 0 on succes;
+ * Returns: 0 on success;
* negative error code on failure.
*/
static int read_more(struct jffs2_sb_info *c, struct jffs2_raw_node_ref *ref,
diff --git a/fs/jffs2/xattr.c b/fs/jffs2/xattr.c
index 082e844..4b10788 100644
--- a/fs/jffs2/xattr.c
+++ b/fs/jffs2/xattr.c
@@ -31,7 +31,7 @@
* is used to release xattr name/value pair and detach from c->xattrindex.
* reclaim_xattr_datum(c)
* is used to reclaim xattr name/value pairs on the xattr name/value pair cache when
- * memory usage by cache is over c->xdatum_mem_threshold. Currentry, this threshold
+ * memory usage by cache is over c->xdatum_mem_threshold. Currently, this threshold
* is hard coded as 32KiB.
* do_verify_xattr_datum(c, xd)
* is used to load the xdatum informations without name/value pair from the medium.
diff --git a/fs/jfs/jfs_dmap.c b/fs/jfs/jfs_dmap.c
index 2bc7d8a..d9b031c 100644
--- a/fs/jfs/jfs_dmap.c
+++ b/fs/jfs/jfs_dmap.c
@@ -755,7 +755,7 @@
* allocation group.
*/
if ((blkno & (bmp->db_agsize - 1)) == 0)
- /* check if the AG is currenly being written to.
+ /* check if the AG is currently being written to.
* if so, call dbNextAG() to find a non-busy
* AG with sufficient free space.
*/
@@ -3337,7 +3337,7 @@
for (i = 0, n = 0; i < agno; n++) {
bmp->db_agfree[n] = 0; /* init collection point */
- /* coalesce cotiguous k AGs; */
+ /* coalesce contiguous k AGs; */
for (j = 0; j < k && i < agno; j++, i++) {
/* merge AGi to AGn */
bmp->db_agfree[n] += bmp->db_agfree[i];
diff --git a/fs/ncpfs/ioctl.c b/fs/ncpfs/ioctl.c
index 0d58caf..ec8f45f 100644
--- a/fs/ncpfs/ioctl.c
+++ b/fs/ncpfs/ioctl.c
@@ -835,7 +835,7 @@
case NCP_IOC_SETROOT:
return 0;
default:
- /* unkown IOCTL command, assume write */
+ /* unknown IOCTL command, assume write */
return 1;
}
}
diff --git a/fs/notify/inotify/inotify_user.c b/fs/notify/inotify/inotify_user.c
index 1d1d1a2..5ef5f36 100644
--- a/fs/notify/inotify/inotify_user.c
+++ b/fs/notify/inotify/inotify_user.c
@@ -741,10 +741,6 @@
/* create/update an inode mark */
ret = inotify_update_watch(group, inode, mask);
- if (unlikely(ret))
- goto path_put_and_out;
-
-path_put_and_out:
path_put(&path);
fput_and_out:
fput_light(filp, fput_needed);
diff --git a/fs/ntfs/compress.c b/fs/ntfs/compress.c
index 9669541..08f7530 100644
--- a/fs/ntfs/compress.c
+++ b/fs/ntfs/compress.c
@@ -927,7 +927,7 @@
return 0;
ntfs_debug("Failed. Returning error code %s.", err == -EOVERFLOW ?
- "EOVERFLOW" : (!err ? "EIO" : "unkown error"));
+ "EOVERFLOW" : (!err ? "EIO" : "unknown error"));
return err < 0 ? err : -EIO;
read_err:
diff --git a/fs/ntfs/file.c b/fs/ntfs/file.c
index 663c0e3..43179dd 100644
--- a/fs/ntfs/file.c
+++ b/fs/ntfs/file.c
@@ -399,7 +399,7 @@
* @cached_page: allocated but as yet unused page
* @lru_pvec: lru-buffering pagevec of caller
*
- * Obtain @nr_pages locked page cache pages from the mapping @maping and
+ * Obtain @nr_pages locked page cache pages from the mapping @mapping and
* starting at index @index.
*
* If a page is newly created, increment its refcount and add it to the
@@ -1281,7 +1281,7 @@
/*
* Copy as much as we can into the pages and return the number of bytes which
- * were sucessfully copied. If a fault is encountered then clear the pages
+ * were successfully copied. If a fault is encountered then clear the pages
* out to (ofs + bytes) and return the number of bytes which were copied.
*/
static inline size_t ntfs_copy_from_user(struct page **pages,
diff --git a/fs/ntfs/logfile.c b/fs/ntfs/logfile.c
index 89b0298..4dadcdf 100644
--- a/fs/ntfs/logfile.c
+++ b/fs/ntfs/logfile.c
@@ -338,7 +338,7 @@
* copy of the complete multi sector transfer deprotected page. On failure,
* *@wrp is undefined.
*
- * Simillarly, if @lsn is not NULL, on succes *@lsn will be set to the current
+ * Simillarly, if @lsn is not NULL, on success *@lsn will be set to the current
* logfile lsn according to this restart page. On failure, *@lsn is undefined.
*
* The following error codes are defined:
diff --git a/fs/ocfs2/alloc.c b/fs/ocfs2/alloc.c
index 38a42f5..7c7198a 100644
--- a/fs/ocfs2/alloc.c
+++ b/fs/ocfs2/alloc.c
@@ -2398,7 +2398,7 @@
*
* The array is assumed to be large enough to hold an entire path (tree depth).
*
- * Upon succesful return from this function:
+ * Upon successful return from this function:
*
* - The 'right_path' array will contain a path to the leaf block
* whose range contains e_cpos.
diff --git a/fs/ocfs2/blockcheck.c b/fs/ocfs2/blockcheck.c
index a1163b8..b7428c5 100644
--- a/fs/ocfs2/blockcheck.c
+++ b/fs/ocfs2/blockcheck.c
@@ -47,7 +47,7 @@
* Calculate the bit offset in the hamming code buffer based on the bit's
* offset in the data buffer. Since the hamming code reserves all
* power-of-two bits for parity, the data bit number and the code bit
- * number are offest by all the parity bits beforehand.
+ * number are offset by all the parity bits beforehand.
*
* Recall that bit numbers in hamming code are 1-based. This function
* takes the 0-based data bit from the caller.
diff --git a/fs/ocfs2/dlm/dlmmaster.c b/fs/ocfs2/dlm/dlmmaster.c
index 83bcaf2..03ccf9a 100644
--- a/fs/ocfs2/dlm/dlmmaster.c
+++ b/fs/ocfs2/dlm/dlmmaster.c
@@ -2586,7 +2586,7 @@
* is complete everywhere. if the target dies while this is
* going on, some nodes could potentially see the target as the
* master, so it is important that my recovery finds the migration
- * mle and sets the master to UNKNONWN. */
+ * mle and sets the master to UNKNOWN. */
/* wait for new node to assert master */
diff --git a/fs/ocfs2/dlmglue.c b/fs/ocfs2/dlmglue.c
index 0d38d67..c5e4a49 100644
--- a/fs/ocfs2/dlmglue.c
+++ b/fs/ocfs2/dlmglue.c
@@ -1855,7 +1855,7 @@
* outstanding lock request, so a cancel convert is
* required. We intentionally overwrite 'ret' - if the
* cancel fails and the lock was granted, it's easier
- * to just bubble sucess back up to the user.
+ * to just bubble success back up to the user.
*/
ret = ocfs2_flock_handle_signal(lockres, level);
} else if (!ret && (level > lockres->l_level)) {
diff --git a/fs/ocfs2/journal.c b/fs/ocfs2/journal.c
index 54c16b6..bf34c49 100644
--- a/fs/ocfs2/journal.c
+++ b/fs/ocfs2/journal.c
@@ -659,7 +659,7 @@
default:
status = -EINVAL;
- mlog(ML_ERROR, "Uknown access type!\n");
+ mlog(ML_ERROR, "Unknown access type!\n");
}
if (!status && ocfs2_meta_ecc(osb) && triggers)
jbd2_journal_set_triggers(bh, &triggers->ot_triggers);
diff --git a/fs/ocfs2/refcounttree.c b/fs/ocfs2/refcounttree.c
index 3a0df7a..30967e3 100644
--- a/fs/ocfs2/refcounttree.c
+++ b/fs/ocfs2/refcounttree.c
@@ -2431,7 +2431,7 @@
* we gonna touch and whether we need to create new blocks.
*
* Normally the refcount blocks store these refcount should be
- * continguous also, so that we can get the number easily.
+ * contiguous also, so that we can get the number easily.
* As for meta_ac, we will at most add split 2 refcount record and
* 2 more refcount block, so just check it in a rough way.
*
diff --git a/fs/omfs/bitmap.c b/fs/omfs/bitmap.c
index e1c0ec0..0822345 100644
--- a/fs/omfs/bitmap.c
+++ b/fs/omfs/bitmap.c
@@ -85,7 +85,7 @@
}
/*
- * Tries to allocate exactly one block. Returns true if sucessful.
+ * Tries to allocate exactly one block. Returns true if successful.
*/
int omfs_allocate_block(struct super_block *sb, u64 block)
{
diff --git a/fs/qnx4/bitmap.c b/fs/qnx4/bitmap.c
index 0afba06..32f5d13 100644
--- a/fs/qnx4/bitmap.c
+++ b/fs/qnx4/bitmap.c
@@ -67,7 +67,7 @@
while (total < size) {
if ((bh = sb_bread(sb, start + offset)) == NULL) {
- printk("qnx4: I/O error in counting free blocks\n");
+ printk(KERN_ERR "qnx4: I/O error in counting free blocks\n");
break;
}
count_bits(bh->b_data, size - total, &total_free);
diff --git a/fs/qnx4/dir.c b/fs/qnx4/dir.c
index 86cc39c..6f30c3d 100644
--- a/fs/qnx4/dir.c
+++ b/fs/qnx4/dir.c
@@ -26,8 +26,8 @@
int ix, ino;
int size;
- QNX4DEBUG(("qnx4_readdir:i_size = %ld\n", (long) inode->i_size));
- QNX4DEBUG(("filp->f_pos = %ld\n", (long) filp->f_pos));
+ QNX4DEBUG((KERN_INFO "qnx4_readdir:i_size = %ld\n", (long) inode->i_size));
+ QNX4DEBUG((KERN_INFO "filp->f_pos = %ld\n", (long) filp->f_pos));
lock_kernel();
@@ -50,7 +50,7 @@
size = QNX4_NAME_MAX;
if ( ( de->di_status & (QNX4_FILE_USED|QNX4_FILE_LINK) ) != 0 ) {
- QNX4DEBUG(("qnx4_readdir:%.*s\n", size, de->di_fname));
+ QNX4DEBUG((KERN_INFO "qnx4_readdir:%.*s\n", size, de->di_fname));
if ( ( de->di_status & QNX4_FILE_LINK ) == 0 )
ino = blknum * QNX4_INODES_PER_BLOCK + ix - 1;
else {
diff --git a/fs/qnx4/inode.c b/fs/qnx4/inode.c
index d2cd179..449f5a6 100644
--- a/fs/qnx4/inode.c
+++ b/fs/qnx4/inode.c
@@ -107,7 +107,7 @@
{
unsigned long phys;
- QNX4DEBUG(("qnx4: qnx4_get_block inode=[%ld] iblock=[%ld]\n",inode->i_ino,iblock));
+ QNX4DEBUG((KERN_INFO "qnx4: qnx4_get_block inode=[%ld] iblock=[%ld]\n",inode->i_ino,iblock));
phys = qnx4_block_map( inode, iblock );
if ( phys ) {
@@ -142,12 +142,12 @@
// read next xtnt block.
bh = sb_bread(inode->i_sb, i_xblk - 1);
if ( !bh ) {
- QNX4DEBUG(("qnx4: I/O error reading xtnt block [%ld])\n", i_xblk - 1));
+ QNX4DEBUG((KERN_ERR "qnx4: I/O error reading xtnt block [%ld])\n", i_xblk - 1));
return -EIO;
}
xblk = (struct qnx4_xblk*)bh->b_data;
if ( memcmp( xblk->xblk_signature, "IamXblk", 7 ) ) {
- QNX4DEBUG(("qnx4: block at %ld is not a valid xtnt\n", qnx4_inode->i_xblk));
+ QNX4DEBUG((KERN_ERR "qnx4: block at %ld is not a valid xtnt\n", qnx4_inode->i_xblk));
return -EIO;
}
}
@@ -168,7 +168,7 @@
brelse( bh );
}
- QNX4DEBUG(("qnx4: mapping block %ld of inode %ld = %ld\n",iblock,inode->i_ino,block));
+ QNX4DEBUG((KERN_INFO "qnx4: mapping block %ld of inode %ld = %ld\n",iblock,inode->i_ino,block));
return block;
}
@@ -209,7 +209,7 @@
if (*(qnx4_sb(sb)->sb->RootDir.di_fname) != '/') {
return "no qnx4 filesystem (no root dir).";
} else {
- QNX4DEBUG(("QNX4 filesystem found on dev %s.\n", sb->s_id));
+ QNX4DEBUG((KERN_NOTICE "QNX4 filesystem found on dev %s.\n", sb->s_id));
rd = le32_to_cpu(qnx4_sb(sb)->sb->RootDir.di_first_xtnt.xtnt_blk) - 1;
rl = le32_to_cpu(qnx4_sb(sb)->sb->RootDir.di_first_xtnt.xtnt_size);
for (j = 0; j < rl; j++) {
@@ -220,7 +220,7 @@
for (i = 0; i < QNX4_INODES_PER_BLOCK; i++) {
rootdir = (struct qnx4_inode_entry *) (bh->b_data + i * QNX4_DIR_ENTRY_SIZE);
if (rootdir->di_fname != NULL) {
- QNX4DEBUG(("Rootdir entry found : [%s]\n", rootdir->di_fname));
+ QNX4DEBUG((KERN_INFO "rootdir entry found : [%s]\n", rootdir->di_fname));
if (!strncmp(rootdir->di_fname, QNX4_BMNAME, sizeof QNX4_BMNAME)) {
found = 1;
qnx4_sb(sb)->BitMap = kmalloc( sizeof( struct qnx4_inode_entry ), GFP_KERNEL );
@@ -265,12 +265,12 @@
if we don't belong here... */
bh = sb_bread(s, 1);
if (!bh) {
- printk("qnx4: unable to read the superblock\n");
+ printk(KERN_ERR "qnx4: unable to read the superblock\n");
goto outnobh;
}
if ( le32_to_cpup((__le32*) bh->b_data) != QNX4_SUPER_MAGIC ) {
if (!silent)
- printk("qnx4: wrong fsid in superblock.\n");
+ printk(KERN_ERR "qnx4: wrong fsid in superblock.\n");
goto out;
}
s->s_op = &qnx4_sops;
@@ -284,14 +284,14 @@
errmsg = qnx4_checkroot(s);
if (errmsg != NULL) {
if (!silent)
- printk("qnx4: %s\n", errmsg);
+ printk(KERN_ERR "qnx4: %s\n", errmsg);
goto out;
}
/* does root not have inode number QNX4_ROOT_INO ?? */
root = qnx4_iget(s, QNX4_ROOT_INO * QNX4_INODES_PER_BLOCK);
if (IS_ERR(root)) {
- printk("qnx4: get inode failed\n");
+ printk(KERN_ERR "qnx4: get inode failed\n");
ret = PTR_ERR(root);
goto out;
}
@@ -374,7 +374,7 @@
qnx4_inode = qnx4_raw_inode(inode);
inode->i_mode = 0;
- QNX4DEBUG(("Reading inode : [%d]\n", ino));
+ QNX4DEBUG((KERN_INFO "reading inode : [%d]\n", ino));
if (!ino) {
printk(KERN_ERR "qnx4: bad inode number on dev %s: %lu is "
"out of range\n",
@@ -385,7 +385,7 @@
block = ino / QNX4_INODES_PER_BLOCK;
if (!(bh = sb_bread(sb, block))) {
- printk("qnx4: major problem: unable to read inode from dev "
+ printk(KERN_ERR "qnx4: major problem: unable to read inode from dev "
"%s\n", sb->s_id);
iget_failed(inode);
return ERR_PTR(-EIO);
@@ -499,7 +499,7 @@
return err;
}
- printk("QNX4 filesystem 0.2.3 registered.\n");
+ printk(KERN_INFO "QNX4 filesystem 0.2.3 registered.\n");
return 0;
}
diff --git a/fs/qnx4/namei.c b/fs/qnx4/namei.c
index ae1e7ed..58703eb 100644
--- a/fs/qnx4/namei.c
+++ b/fs/qnx4/namei.c
@@ -30,7 +30,7 @@
int namelen, thislen;
if (bh == NULL) {
- printk("qnx4: matching unassigned buffer !\n");
+ printk(KERN_WARNING "qnx4: matching unassigned buffer !\n");
return 0;
}
de = (struct qnx4_inode_entry *) (bh->b_data + *offset);
@@ -66,7 +66,7 @@
*res_dir = NULL;
if (!dir->i_sb) {
- printk("qnx4: no superblock on dir.\n");
+ printk(KERN_WARNING "qnx4: no superblock on dir.\n");
return NULL;
}
bh = NULL;
@@ -124,7 +124,7 @@
foundinode = qnx4_iget(dir->i_sb, ino);
if (IS_ERR(foundinode)) {
unlock_kernel();
- QNX4DEBUG(("qnx4: lookup->iget -> error %ld\n",
+ QNX4DEBUG((KERN_ERR "qnx4: lookup->iget -> error %ld\n",
PTR_ERR(foundinode)));
return ERR_CAST(foundinode);
}
diff --git a/fs/reiserfs/Makefile b/fs/reiserfs/Makefile
index 7c5ab63..6a9e30c 100644
--- a/fs/reiserfs/Makefile
+++ b/fs/reiserfs/Makefile
@@ -7,7 +7,7 @@
reiserfs-objs := bitmap.o do_balan.o namei.o inode.o file.o dir.o fix_node.o \
super.o prints.o objectid.o lbalance.o ibalance.o stree.o \
hashes.o tail_conversion.o journal.o resize.o \
- item_ops.o ioctl.o procfs.o xattr.o
+ item_ops.o ioctl.o procfs.o xattr.o lock.o
ifeq ($(CONFIG_REISERFS_FS_XATTR),y)
reiserfs-objs += xattr_user.o xattr_trusted.o
diff --git a/fs/reiserfs/bitmap.c b/fs/reiserfs/bitmap.c
index e716161..6854957 100644
--- a/fs/reiserfs/bitmap.c
+++ b/fs/reiserfs/bitmap.c
@@ -1249,14 +1249,18 @@
else if (bitmap == 0)
block = (REISERFS_DISK_OFFSET_IN_BYTES >> sb->s_blocksize_bits) + 1;
+ reiserfs_write_unlock(sb);
bh = sb_bread(sb, block);
+ reiserfs_write_lock(sb);
if (bh == NULL)
reiserfs_warning(sb, "sh-2029: %s: bitmap block (#%u) "
"reading failed", __func__, block);
else {
if (buffer_locked(bh)) {
PROC_INFO_INC(sb, scan_bitmap.wait);
+ reiserfs_write_unlock(sb);
__wait_on_buffer(bh);
+ reiserfs_write_lock(sb);
}
BUG_ON(!buffer_uptodate(bh));
BUG_ON(atomic_read(&bh->b_count) == 0);
diff --git a/fs/reiserfs/dir.c b/fs/reiserfs/dir.c
index 6d2668f..c094f58 100644
--- a/fs/reiserfs/dir.c
+++ b/fs/reiserfs/dir.c
@@ -20,7 +20,7 @@
.read = generic_read_dir,
.readdir = reiserfs_readdir,
.fsync = reiserfs_dir_fsync,
- .ioctl = reiserfs_ioctl,
+ .unlocked_ioctl = reiserfs_ioctl,
#ifdef CONFIG_COMPAT
.compat_ioctl = reiserfs_compat_ioctl,
#endif
@@ -174,14 +174,22 @@
// user space buffer is swapped out. At that time
// entry can move to somewhere else
memcpy(local_buf, d_name, d_reclen);
+
+ /*
+ * Since filldir might sleep, we can release
+ * the write lock here for other waiters
+ */
+ reiserfs_write_unlock(inode->i_sb);
if (filldir
(dirent, local_buf, d_reclen, d_off, d_ino,
DT_UNKNOWN) < 0) {
+ reiserfs_write_lock(inode->i_sb);
if (local_buf != small_buf) {
kfree(local_buf);
}
goto end;
}
+ reiserfs_write_lock(inode->i_sb);
if (local_buf != small_buf) {
kfree(local_buf);
}
diff --git a/fs/reiserfs/do_balan.c b/fs/reiserfs/do_balan.c
index 128d3f7..60c0804 100644
--- a/fs/reiserfs/do_balan.c
+++ b/fs/reiserfs/do_balan.c
@@ -21,14 +21,6 @@
#include <linux/buffer_head.h>
#include <linux/kernel.h>
-#ifdef CONFIG_REISERFS_CHECK
-
-struct tree_balance *cur_tb = NULL; /* detects whether more than one
- copy of tb exists as a means
- of checking whether schedule
- is interrupting do_balance */
-#endif
-
static inline void buffer_info_init_left(struct tree_balance *tb,
struct buffer_info *bi)
{
@@ -1840,11 +1832,12 @@
{
int retval = 0;
- if (cur_tb) {
+ if (REISERFS_SB(tb->tb_sb)->cur_tb) {
reiserfs_panic(tb->tb_sb, "vs-12335", "suspect that schedule "
"occurred based on cur_tb not being null at "
"this point in code. do_balance cannot properly "
- "handle schedule occurring while it runs.");
+ "handle concurrent tree accesses on a same "
+ "mount point.");
}
/* double check that buffers that we will modify are unlocked. (fix_nodes should already have
@@ -1986,7 +1979,7 @@
"check");*/
RFALSE(check_before_balancing(tb), "PAP-12340: locked buffers in TB");
#ifdef CONFIG_REISERFS_CHECK
- cur_tb = tb;
+ REISERFS_SB(tb->tb_sb)->cur_tb = tb;
#endif
}
@@ -1996,7 +1989,7 @@
#ifdef CONFIG_REISERFS_CHECK
check_leaf_level(tb);
check_internal_levels(tb);
- cur_tb = NULL;
+ REISERFS_SB(tb->tb_sb)->cur_tb = NULL;
#endif
/* reiserfs_free_block is no longer schedule safe. So, we need to
diff --git a/fs/reiserfs/file.c b/fs/reiserfs/file.c
index 9f43666..da2dba0 100644
--- a/fs/reiserfs/file.c
+++ b/fs/reiserfs/file.c
@@ -284,7 +284,7 @@
const struct file_operations reiserfs_file_operations = {
.read = do_sync_read,
.write = reiserfs_file_write,
- .ioctl = reiserfs_ioctl,
+ .unlocked_ioctl = reiserfs_ioctl,
#ifdef CONFIG_COMPAT
.compat_ioctl = reiserfs_compat_ioctl,
#endif
diff --git a/fs/reiserfs/fix_node.c b/fs/reiserfs/fix_node.c
index 5e5a4e6..6591cb2 100644
--- a/fs/reiserfs/fix_node.c
+++ b/fs/reiserfs/fix_node.c
@@ -563,9 +563,6 @@
return needed_nodes;
}
-#ifdef CONFIG_REISERFS_CHECK
-extern struct tree_balance *cur_tb;
-#endif
/* Set parameters for balancing.
* Performs write of results of analysis of balancing into structure tb,
@@ -834,7 +831,7 @@
RFALSE(buffer_dirty(new_bh) ||
buffer_journaled(new_bh) ||
buffer_journal_dirty(new_bh),
- "PAP-8140: journlaled or dirty buffer %b for the new block",
+ "PAP-8140: journaled or dirty buffer %b for the new block",
new_bh);
/* Put empty buffers into the array. */
@@ -1022,7 +1019,11 @@
/* Check whether the common parent is locked. */
if (buffer_locked(*pcom_father)) {
+
+ /* Release the write lock while the buffer is busy */
+ reiserfs_write_unlock(tb->tb_sb);
__wait_on_buffer(*pcom_father);
+ reiserfs_write_lock(tb->tb_sb);
if (FILESYSTEM_CHANGED_TB(tb)) {
brelse(*pcom_father);
return REPEAT_SEARCH;
@@ -1927,7 +1928,9 @@
return REPEAT_SEARCH;
if (buffer_locked(bh)) {
+ reiserfs_write_unlock(tb->tb_sb);
__wait_on_buffer(bh);
+ reiserfs_write_lock(tb->tb_sb);
if (FILESYSTEM_CHANGED_TB(tb))
return REPEAT_SEARCH;
}
@@ -1965,7 +1968,9 @@
tb->FL[h]) ? tb->lkey[h] : B_NR_ITEMS(tb->
FL[h]);
son_number = B_N_CHILD_NUM(tb->FL[h], child_position);
+ reiserfs_write_unlock(sb);
bh = sb_bread(sb, son_number);
+ reiserfs_write_lock(sb);
if (!bh)
return IO_ERROR;
if (FILESYSTEM_CHANGED_TB(tb)) {
@@ -2003,7 +2008,9 @@
child_position =
(bh == tb->FR[h]) ? tb->rkey[h] + 1 : 0;
son_number = B_N_CHILD_NUM(tb->FR[h], child_position);
+ reiserfs_write_unlock(sb);
bh = sb_bread(sb, son_number);
+ reiserfs_write_lock(sb);
if (!bh)
return IO_ERROR;
if (FILESYSTEM_CHANGED_TB(tb)) {
@@ -2278,7 +2285,9 @@
REPEAT_SEARCH : CARRY_ON;
}
#endif
+ reiserfs_write_unlock(tb->tb_sb);
__wait_on_buffer(locked);
+ reiserfs_write_lock(tb->tb_sb);
if (FILESYSTEM_CHANGED_TB(tb))
return REPEAT_SEARCH;
}
@@ -2349,12 +2358,14 @@
/* if it possible in indirect_to_direct conversion */
if (buffer_locked(tbS0)) {
+ reiserfs_write_unlock(tb->tb_sb);
__wait_on_buffer(tbS0);
+ reiserfs_write_lock(tb->tb_sb);
if (FILESYSTEM_CHANGED_TB(tb))
return REPEAT_SEARCH;
}
#ifdef CONFIG_REISERFS_CHECK
- if (cur_tb) {
+ if (REISERFS_SB(tb->tb_sb)->cur_tb) {
print_cur_tb("fix_nodes");
reiserfs_panic(tb->tb_sb, "PAP-8305",
"there is pending do_balance");
diff --git a/fs/reiserfs/inode.c b/fs/reiserfs/inode.c
index a14d6cd..3a28e77 100644
--- a/fs/reiserfs/inode.c
+++ b/fs/reiserfs/inode.c
@@ -251,7 +251,6 @@
struct cpu_key key;
struct buffer_head *bh;
struct item_head *ih, tmp_ih;
- int fs_gen;
b_blocknr_t blocknr;
char *p = NULL;
int chars;
@@ -265,7 +264,6 @@
(loff_t) block * inode->i_sb->s_blocksize + 1, TYPE_ANY,
3);
- research:
result = search_for_position_by_key(inode->i_sb, &key, &path);
if (result != POSITION_FOUND) {
pathrelse(&path);
@@ -340,7 +338,6 @@
}
// read file tail into part of page
offset = (cpu_key_k_offset(&key) - 1) & (PAGE_CACHE_SIZE - 1);
- fs_gen = get_generation(inode->i_sb);
copy_item_head(&tmp_ih, ih);
/* we only want to kmap if we are reading the tail into the page.
@@ -348,13 +345,9 @@
** sure we need to. But, this means the item might move if
** kmap schedules
*/
- if (!p) {
+ if (!p)
p = (char *)kmap(bh_result->b_page);
- if (fs_changed(fs_gen, inode->i_sb)
- && item_moved(&tmp_ih, &path)) {
- goto research;
- }
- }
+
p += offset;
memset(p, 0, inode->i_sb->s_blocksize);
do {
@@ -489,10 +482,14 @@
disappeared */
if (REISERFS_I(inode)->i_flags & i_pack_on_close_mask) {
int err;
- lock_kernel();
+
+ reiserfs_write_lock(inode->i_sb);
+
err = reiserfs_commit_for_inode(inode);
REISERFS_I(inode)->i_flags &= ~i_pack_on_close_mask;
- unlock_kernel();
+
+ reiserfs_write_unlock(inode->i_sb);
+
if (err < 0)
ret = err;
}
@@ -601,6 +598,7 @@
__le32 *item;
int done;
int fs_gen;
+ int lock_depth;
struct reiserfs_transaction_handle *th = NULL;
/* space reserved in transaction batch:
. 3 balancings in direct->indirect conversion
@@ -616,12 +614,11 @@
loff_t new_offset =
(((loff_t) block) << inode->i_sb->s_blocksize_bits) + 1;
- /* bad.... */
- reiserfs_write_lock(inode->i_sb);
+ lock_depth = reiserfs_write_lock_once(inode->i_sb);
version = get_inode_item_key_version(inode);
if (!file_capable(inode, block)) {
- reiserfs_write_unlock(inode->i_sb);
+ reiserfs_write_unlock_once(inode->i_sb, lock_depth);
return -EFBIG;
}
@@ -633,7 +630,7 @@
/* find number of block-th logical block of the file */
ret = _get_block_create_0(inode, block, bh_result,
create | GET_BLOCK_READ_DIRECT);
- reiserfs_write_unlock(inode->i_sb);
+ reiserfs_write_unlock_once(inode->i_sb, lock_depth);
return ret;
}
/*
@@ -751,7 +748,7 @@
if (!dangle && th)
retval = reiserfs_end_persistent_transaction(th);
- reiserfs_write_unlock(inode->i_sb);
+ reiserfs_write_unlock_once(inode->i_sb, lock_depth);
/* the item was found, so new blocks were not added to the file
** there is no need to make sure the inode is updated with this
@@ -935,7 +932,7 @@
if (blocks_needed == 1) {
un = &unf_single;
} else {
- un = kzalloc(min(blocks_needed, max_to_insert) * UNFM_P_SIZE, GFP_ATOMIC); // We need to avoid scheduling.
+ un = kzalloc(min(blocks_needed, max_to_insert) * UNFM_P_SIZE, GFP_NOFS);
if (!un) {
un = &unf_single;
blocks_needed = 1;
@@ -997,10 +994,16 @@
if (retval)
goto failure;
}
- /* inserting indirect pointers for a hole can take a
- ** long time. reschedule if needed
+ /*
+ * inserting indirect pointers for a hole can take a
+ * long time. reschedule if needed and also release the write
+ * lock for others.
*/
- cond_resched();
+ if (need_resched()) {
+ reiserfs_write_unlock_once(inode->i_sb, lock_depth);
+ schedule();
+ lock_depth = reiserfs_write_lock_once(inode->i_sb);
+ }
retval = search_for_position_by_key(inode->i_sb, &key, &path);
if (retval == IO_ERROR) {
@@ -1035,7 +1038,7 @@
retval = err;
}
- reiserfs_write_unlock(inode->i_sb);
+ reiserfs_write_unlock_once(inode->i_sb, lock_depth);
reiserfs_check_path(&path);
return retval;
}
@@ -2072,8 +2075,9 @@
int error;
struct buffer_head *bh = NULL;
int err2;
+ int lock_depth;
- reiserfs_write_lock(inode->i_sb);
+ lock_depth = reiserfs_write_lock_once(inode->i_sb);
if (inode->i_size > 0) {
error = grab_tail_page(inode, &page, &bh);
@@ -2142,14 +2146,17 @@
page_cache_release(page);
}
- reiserfs_write_unlock(inode->i_sb);
+ reiserfs_write_unlock_once(inode->i_sb, lock_depth);
+
return 0;
out:
if (page) {
unlock_page(page);
page_cache_release(page);
}
- reiserfs_write_unlock(inode->i_sb);
+
+ reiserfs_write_unlock_once(inode->i_sb, lock_depth);
+
return error;
}
@@ -2608,7 +2615,10 @@
int ret;
int old_ref = 0;
+ reiserfs_write_unlock(inode->i_sb);
reiserfs_wait_on_write_block(inode->i_sb);
+ reiserfs_write_lock(inode->i_sb);
+
fix_tail_page_for_writing(page);
if (reiserfs_transaction_running(inode->i_sb)) {
struct reiserfs_transaction_handle *th;
@@ -2664,6 +2674,8 @@
int update_sd = 0;
struct reiserfs_transaction_handle *th;
unsigned start;
+ int lock_depth = 0;
+ bool locked = false;
if ((unsigned long)fsdata & AOP_FLAG_CONT_EXPAND)
pos ++;
@@ -2690,9 +2702,11 @@
** to do the i_size updates here.
*/
pos += copied;
+
if (pos > inode->i_size) {
struct reiserfs_transaction_handle myth;
- reiserfs_write_lock(inode->i_sb);
+ lock_depth = reiserfs_write_lock_once(inode->i_sb);
+ locked = true;
/* If the file have grown beyond the border where it
can have a tail, unmark it as needing a tail
packing */
@@ -2703,10 +2717,9 @@
REISERFS_I(inode)->i_flags &= ~i_pack_on_close_mask;
ret = journal_begin(&myth, inode->i_sb, 1);
- if (ret) {
- reiserfs_write_unlock(inode->i_sb);
+ if (ret)
goto journal_error;
- }
+
reiserfs_update_inode_transaction(inode);
inode->i_size = pos;
/*
@@ -2718,34 +2731,36 @@
reiserfs_update_sd(&myth, inode);
update_sd = 1;
ret = journal_end(&myth, inode->i_sb, 1);
- reiserfs_write_unlock(inode->i_sb);
if (ret)
goto journal_error;
}
if (th) {
- reiserfs_write_lock(inode->i_sb);
+ if (!locked) {
+ lock_depth = reiserfs_write_lock_once(inode->i_sb);
+ locked = true;
+ }
if (!update_sd)
mark_inode_dirty(inode);
ret = reiserfs_end_persistent_transaction(th);
- reiserfs_write_unlock(inode->i_sb);
if (ret)
goto out;
}
out:
+ if (locked)
+ reiserfs_write_unlock_once(inode->i_sb, lock_depth);
unlock_page(page);
page_cache_release(page);
return ret == 0 ? copied : ret;
journal_error:
+ reiserfs_write_unlock_once(inode->i_sb, lock_depth);
+ locked = false;
if (th) {
- reiserfs_write_lock(inode->i_sb);
if (!update_sd)
reiserfs_update_sd(th, inode);
ret = reiserfs_end_persistent_transaction(th);
- reiserfs_write_unlock(inode->i_sb);
}
-
goto out;
}
@@ -2758,7 +2773,10 @@
int update_sd = 0;
struct reiserfs_transaction_handle *th = NULL;
+ reiserfs_write_unlock(inode->i_sb);
reiserfs_wait_on_write_block(inode->i_sb);
+ reiserfs_write_lock(inode->i_sb);
+
if (reiserfs_transaction_running(inode->i_sb)) {
th = current->journal_info;
}
@@ -2770,7 +2788,6 @@
*/
if (pos > inode->i_size) {
struct reiserfs_transaction_handle myth;
- reiserfs_write_lock(inode->i_sb);
/* If the file have grown beyond the border where it
can have a tail, unmark it as needing a tail
packing */
@@ -2781,10 +2798,9 @@
REISERFS_I(inode)->i_flags &= ~i_pack_on_close_mask;
ret = journal_begin(&myth, inode->i_sb, 1);
- if (ret) {
- reiserfs_write_unlock(inode->i_sb);
+ if (ret)
goto journal_error;
- }
+
reiserfs_update_inode_transaction(inode);
inode->i_size = pos;
/*
@@ -2796,16 +2812,13 @@
reiserfs_update_sd(&myth, inode);
update_sd = 1;
ret = journal_end(&myth, inode->i_sb, 1);
- reiserfs_write_unlock(inode->i_sb);
if (ret)
goto journal_error;
}
if (th) {
- reiserfs_write_lock(inode->i_sb);
if (!update_sd)
mark_inode_dirty(inode);
ret = reiserfs_end_persistent_transaction(th);
- reiserfs_write_unlock(inode->i_sb);
if (ret)
goto out;
}
@@ -2815,11 +2828,9 @@
journal_error:
if (th) {
- reiserfs_write_lock(inode->i_sb);
if (!update_sd)
reiserfs_update_sd(th, inode);
ret = reiserfs_end_persistent_transaction(th);
- reiserfs_write_unlock(inode->i_sb);
}
return ret;
diff --git a/fs/reiserfs/ioctl.c b/fs/reiserfs/ioctl.c
index 0ccc3fd..ace7745 100644
--- a/fs/reiserfs/ioctl.c
+++ b/fs/reiserfs/ioctl.c
@@ -13,44 +13,52 @@
#include <linux/compat.h>
/*
-** reiserfs_ioctl - handler for ioctl for inode
-** supported commands:
-** 1) REISERFS_IOC_UNPACK - try to unpack tail from direct item into indirect
-** and prevent packing file (argument arg has to be non-zero)
-** 2) REISERFS_IOC_[GS]ETFLAGS, REISERFS_IOC_[GS]ETVERSION
-** 3) That's all for a while ...
-*/
-int reiserfs_ioctl(struct inode *inode, struct file *filp, unsigned int cmd,
- unsigned long arg)
+ * reiserfs_ioctl - handler for ioctl for inode
+ * supported commands:
+ * 1) REISERFS_IOC_UNPACK - try to unpack tail from direct item into indirect
+ * and prevent packing file (argument arg has to be non-zero)
+ * 2) REISERFS_IOC_[GS]ETFLAGS, REISERFS_IOC_[GS]ETVERSION
+ * 3) That's all for a while ...
+ */
+long reiserfs_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
{
+ struct inode *inode = filp->f_path.dentry->d_inode;
unsigned int flags;
int err = 0;
+ reiserfs_write_lock(inode->i_sb);
+
switch (cmd) {
case REISERFS_IOC_UNPACK:
if (S_ISREG(inode->i_mode)) {
if (arg)
- return reiserfs_unpack(inode, filp);
- else
- return 0;
+ err = reiserfs_unpack(inode, filp);
} else
- return -ENOTTY;
- /* following two cases are taken from fs/ext2/ioctl.c by Remy
- Card (card@masi.ibp.fr) */
+ err = -ENOTTY;
+ break;
+ /*
+ * following two cases are taken from fs/ext2/ioctl.c by Remy
+ * Card (card@masi.ibp.fr)
+ */
case REISERFS_IOC_GETFLAGS:
- if (!reiserfs_attrs(inode->i_sb))
- return -ENOTTY;
+ if (!reiserfs_attrs(inode->i_sb)) {
+ err = -ENOTTY;
+ break;
+ }
flags = REISERFS_I(inode)->i_attrs;
i_attrs_to_sd_attrs(inode, (__u16 *) & flags);
- return put_user(flags, (int __user *)arg);
+ err = put_user(flags, (int __user *)arg);
+ break;
case REISERFS_IOC_SETFLAGS:{
- if (!reiserfs_attrs(inode->i_sb))
- return -ENOTTY;
+ if (!reiserfs_attrs(inode->i_sb)) {
+ err = -ENOTTY;
+ break;
+ }
err = mnt_want_write(filp->f_path.mnt);
if (err)
- return err;
+ break;
if (!is_owner_or_cap(inode)) {
err = -EPERM;
@@ -90,16 +98,18 @@
mark_inode_dirty(inode);
setflags_out:
mnt_drop_write(filp->f_path.mnt);
- return err;
+ break;
}
case REISERFS_IOC_GETVERSION:
- return put_user(inode->i_generation, (int __user *)arg);
+ err = put_user(inode->i_generation, (int __user *)arg);
+ break;
case REISERFS_IOC_SETVERSION:
if (!is_owner_or_cap(inode))
- return -EPERM;
+ err = -EPERM;
+ break;
err = mnt_want_write(filp->f_path.mnt);
if (err)
- return err;
+ break;
if (get_user(inode->i_generation, (int __user *)arg)) {
err = -EFAULT;
goto setversion_out;
@@ -108,19 +118,20 @@
mark_inode_dirty(inode);
setversion_out:
mnt_drop_write(filp->f_path.mnt);
- return err;
+ break;
default:
- return -ENOTTY;
+ err = -ENOTTY;
}
+
+ reiserfs_write_unlock(inode->i_sb);
+
+ return err;
}
#ifdef CONFIG_COMPAT
long reiserfs_compat_ioctl(struct file *file, unsigned int cmd,
unsigned long arg)
{
- struct inode *inode = file->f_path.dentry->d_inode;
- int ret;
-
/* These are just misnamed, they actually get/put from/to user an int */
switch (cmd) {
case REISERFS_IOC32_UNPACK:
@@ -141,10 +152,8 @@
default:
return -ENOIOCTLCMD;
}
- lock_kernel();
- ret = reiserfs_ioctl(inode, file, cmd, (unsigned long) compat_ptr(arg));
- unlock_kernel();
- return ret;
+
+ return reiserfs_ioctl(file, cmd, (unsigned long) compat_ptr(arg));
}
#endif
diff --git a/fs/reiserfs/journal.c b/fs/reiserfs/journal.c
index 9062220..2f8a7e7 100644
--- a/fs/reiserfs/journal.c
+++ b/fs/reiserfs/journal.c
@@ -429,21 +429,6 @@
clear_buffer_journal_restore_dirty(bh);
}
-/* utility function to force a BUG if it is called without the big
-** kernel lock held. caller is the string printed just before calling BUG()
-*/
-void reiserfs_check_lock_depth(struct super_block *sb, char *caller)
-{
-#ifdef CONFIG_SMP
- if (current->lock_depth < 0) {
- reiserfs_panic(sb, "journal-1", "%s called without kernel "
- "lock held", caller);
- }
-#else
- ;
-#endif
-}
-
/* return a cnode with same dev, block number and size in table, or null if not found */
static inline struct reiserfs_journal_cnode *get_journal_hash_dev(struct
super_block
@@ -556,7 +541,8 @@
static inline void lock_journal(struct super_block *sb)
{
PROC_INFO_INC(sb, journal.lock_journal);
- mutex_lock(&SB_JOURNAL(sb)->j_mutex);
+
+ reiserfs_mutex_lock_safe(&SB_JOURNAL(sb)->j_mutex, sb);
}
/* unlock the current transaction */
@@ -708,7 +694,9 @@
disable_barrier(s);
set_buffer_uptodate(bh);
set_buffer_dirty(bh);
+ reiserfs_write_unlock(s);
sync_dirty_buffer(bh);
+ reiserfs_write_lock(s);
}
}
@@ -996,8 +984,13 @@
{
DEFINE_WAIT(wait);
struct reiserfs_journal *j = SB_JOURNAL(s);
- if (atomic_read(&j->j_async_throttle))
+
+ if (atomic_read(&j->j_async_throttle)) {
+ reiserfs_write_unlock(s);
congestion_wait(BLK_RW_ASYNC, HZ / 10);
+ reiserfs_write_lock(s);
+ }
+
return 0;
}
@@ -1043,7 +1036,8 @@
}
/* make sure nobody is trying to flush this one at the same time */
- mutex_lock(&jl->j_commit_mutex);
+ reiserfs_mutex_lock_safe(&jl->j_commit_mutex, s);
+
if (!journal_list_still_alive(s, trans_id)) {
mutex_unlock(&jl->j_commit_mutex);
goto put_jl;
@@ -1061,12 +1055,17 @@
if (!list_empty(&jl->j_bh_list)) {
int ret;
- unlock_kernel();
+
+ /*
+ * We might sleep in numerous places inside
+ * write_ordered_buffers. Relax the write lock.
+ */
+ reiserfs_write_unlock(s);
ret = write_ordered_buffers(&journal->j_dirty_buffers_lock,
journal, jl, &jl->j_bh_list);
if (ret < 0 && retval == 0)
retval = ret;
- lock_kernel();
+ reiserfs_write_lock(s);
}
BUG_ON(!list_empty(&jl->j_bh_list));
/*
@@ -1085,8 +1084,11 @@
SB_ONDISK_JOURNAL_SIZE(s);
tbh = journal_find_get_block(s, bn);
if (tbh) {
- if (buffer_dirty(tbh))
- ll_rw_block(WRITE, 1, &tbh) ;
+ if (buffer_dirty(tbh)) {
+ reiserfs_write_unlock(s);
+ ll_rw_block(WRITE, 1, &tbh);
+ reiserfs_write_lock(s);
+ }
put_bh(tbh) ;
}
}
@@ -1114,12 +1116,19 @@
bn = SB_ONDISK_JOURNAL_1st_BLOCK(s) +
(jl->j_start + i) % SB_ONDISK_JOURNAL_SIZE(s);
tbh = journal_find_get_block(s, bn);
+
+ reiserfs_write_unlock(s);
wait_on_buffer(tbh);
+ reiserfs_write_lock(s);
// since we're using ll_rw_blk above, it might have skipped over
// a locked buffer. Double check here
//
- if (buffer_dirty(tbh)) /* redundant, sync_dirty_buffer() checks */
+ /* redundant, sync_dirty_buffer() checks */
+ if (buffer_dirty(tbh)) {
+ reiserfs_write_unlock(s);
sync_dirty_buffer(tbh);
+ reiserfs_write_lock(s);
+ }
if (unlikely(!buffer_uptodate(tbh))) {
#ifdef CONFIG_REISERFS_CHECK
reiserfs_warning(s, "journal-601",
@@ -1143,10 +1152,15 @@
if (buffer_dirty(jl->j_commit_bh))
BUG();
mark_buffer_dirty(jl->j_commit_bh) ;
+ reiserfs_write_unlock(s);
sync_dirty_buffer(jl->j_commit_bh) ;
+ reiserfs_write_lock(s);
}
- } else
+ } else {
+ reiserfs_write_unlock(s);
wait_on_buffer(jl->j_commit_bh);
+ reiserfs_write_lock(s);
+ }
check_barrier_completion(s, jl->j_commit_bh);
@@ -1286,7 +1300,9 @@
if (trans_id >= journal->j_last_flush_trans_id) {
if (buffer_locked((journal->j_header_bh))) {
+ reiserfs_write_unlock(sb);
wait_on_buffer((journal->j_header_bh));
+ reiserfs_write_lock(sb);
if (unlikely(!buffer_uptodate(journal->j_header_bh))) {
#ifdef CONFIG_REISERFS_CHECK
reiserfs_warning(sb, "journal-699",
@@ -1312,12 +1328,16 @@
disable_barrier(sb);
goto sync;
}
+ reiserfs_write_unlock(sb);
wait_on_buffer(journal->j_header_bh);
+ reiserfs_write_lock(sb);
check_barrier_completion(sb, journal->j_header_bh);
} else {
sync:
set_buffer_dirty(journal->j_header_bh);
+ reiserfs_write_unlock(sb);
sync_dirty_buffer(journal->j_header_bh);
+ reiserfs_write_lock(sb);
}
if (!buffer_uptodate(journal->j_header_bh)) {
reiserfs_warning(sb, "journal-837",
@@ -1409,7 +1429,7 @@
/* if flushall == 0, the lock is already held */
if (flushall) {
- mutex_lock(&journal->j_flush_mutex);
+ reiserfs_mutex_lock_safe(&journal->j_flush_mutex, s);
} else if (mutex_trylock(&journal->j_flush_mutex)) {
BUG();
}
@@ -1553,7 +1573,11 @@
reiserfs_panic(s, "journal-1011",
"cn->bh is NULL");
}
+
+ reiserfs_write_unlock(s);
wait_on_buffer(cn->bh);
+ reiserfs_write_lock(s);
+
if (!cn->bh) {
reiserfs_panic(s, "journal-1012",
"cn->bh is NULL");
@@ -1769,7 +1793,7 @@
struct reiserfs_journal *journal = SB_JOURNAL(s);
chunk.nr = 0;
- mutex_lock(&journal->j_flush_mutex);
+ reiserfs_mutex_lock_safe(&journal->j_flush_mutex, s);
if (!journal_list_still_alive(s, orig_trans_id)) {
goto done;
}
@@ -1973,11 +1997,19 @@
reiserfs_mounted_fs_count--;
/* wait for all commits to finish */
cancel_delayed_work(&SB_JOURNAL(sb)->j_work);
+
+ /*
+ * We must release the write lock here because
+ * the workqueue job (flush_async_commit) needs this lock
+ */
+ reiserfs_write_unlock(sb);
flush_workqueue(commit_wq);
+
if (!reiserfs_mounted_fs_count) {
destroy_workqueue(commit_wq);
commit_wq = NULL;
}
+ reiserfs_write_lock(sb);
free_journal_ram(sb);
@@ -2243,7 +2275,11 @@
/* read in the log blocks, memcpy to the corresponding real block */
ll_rw_block(READ, get_desc_trans_len(desc), log_blocks);
for (i = 0; i < get_desc_trans_len(desc); i++) {
+
+ reiserfs_write_unlock(sb);
wait_on_buffer(log_blocks[i]);
+ reiserfs_write_lock(sb);
+
if (!buffer_uptodate(log_blocks[i])) {
reiserfs_warning(sb, "journal-1212",
"REPLAY FAILURE fsck required! "
@@ -2765,11 +2801,27 @@
goto free_and_return;
}
+ /*
+ * We need to unlock here to avoid creating the following
+ * dependency:
+ * reiserfs_lock -> sysfs_mutex
+ * Because the reiserfs mmap path creates the following dependency:
+ * mm->mmap -> reiserfs_lock, hence we have
+ * mm->mmap -> reiserfs_lock ->sysfs_mutex
+ * This would ends up in a circular dependency with sysfs readdir path
+ * which does sysfs_mutex -> mm->mmap_sem
+ * This is fine because the reiserfs lock is useless in mount path,
+ * at least until we call journal_begin. We keep it for paranoid
+ * reasons.
+ */
+ reiserfs_write_unlock(sb);
if (journal_init_dev(sb, journal, j_dev_name) != 0) {
+ reiserfs_write_lock(sb);
reiserfs_warning(sb, "sh-462",
"unable to initialize jornal device");
goto free_and_return;
}
+ reiserfs_write_lock(sb);
rs = SB_DISK_SUPER_BLOCK(sb);
@@ -2881,8 +2933,11 @@
}
reiserfs_mounted_fs_count++;
- if (reiserfs_mounted_fs_count <= 1)
+ if (reiserfs_mounted_fs_count <= 1) {
+ reiserfs_write_unlock(sb);
commit_wq = create_workqueue("reiserfs");
+ reiserfs_write_lock(sb);
+ }
INIT_DELAYED_WORK(&journal->j_work, flush_async_commits);
journal->j_work_sb = sb;
@@ -2964,8 +3019,11 @@
init_waitqueue_entry(&wait, current);
add_wait_queue(&journal->j_join_wait, &wait);
set_current_state(TASK_UNINTERRUPTIBLE);
- if (test_bit(J_WRITERS_QUEUED, &journal->j_state))
+ if (test_bit(J_WRITERS_QUEUED, &journal->j_state)) {
+ reiserfs_write_unlock(s);
schedule();
+ reiserfs_write_lock(s);
+ }
__set_current_state(TASK_RUNNING);
remove_wait_queue(&journal->j_join_wait, &wait);
}
@@ -2982,7 +3040,9 @@
struct reiserfs_journal *journal = SB_JOURNAL(sb);
unsigned long bcount = journal->j_bcount;
while (1) {
+ reiserfs_write_unlock(sb);
schedule_timeout_uninterruptible(1);
+ reiserfs_write_lock(sb);
journal->j_current_jl->j_state |= LIST_COMMIT_PENDING;
while ((atomic_read(&journal->j_wcount) > 0 ||
atomic_read(&journal->j_jlock)) &&
@@ -3033,7 +3093,9 @@
if (test_bit(J_WRITERS_BLOCKED, &journal->j_state)) {
unlock_journal(sb);
+ reiserfs_write_unlock(sb);
reiserfs_wait_on_write_block(sb);
+ reiserfs_write_lock(sb);
PROC_INFO_INC(sb, journal.journal_relock_writers);
goto relock;
}
@@ -3506,14 +3568,14 @@
struct reiserfs_journal_list *jl;
struct list_head *entry;
- lock_kernel();
+ reiserfs_write_lock(sb);
if (!list_empty(&journal->j_journal_list)) {
/* last entry is the youngest, commit it and you get everything */
entry = journal->j_journal_list.prev;
jl = JOURNAL_LIST_ENTRY(entry);
flush_commit_list(sb, jl, 1);
}
- unlock_kernel();
+ reiserfs_write_unlock(sb);
}
/*
@@ -4041,7 +4103,7 @@
* the new transaction is fully setup, and we've already flushed the
* ordered bh list
*/
- mutex_lock(&jl->j_commit_mutex);
+ reiserfs_mutex_lock_safe(&jl->j_commit_mutex, sb);
/* save the transaction id in case we need to commit it later */
commit_trans_id = jl->j_trans_id;
@@ -4156,7 +4218,9 @@
next = cn->next;
free_cnode(sb, cn);
cn = next;
+ reiserfs_write_unlock(sb);
cond_resched();
+ reiserfs_write_lock(sb);
}
/* we are done with both the c_bh and d_bh, but
@@ -4203,10 +4267,10 @@
* is lost.
*/
if (!list_empty(&jl->j_tail_bh_list)) {
- unlock_kernel();
+ reiserfs_write_unlock(sb);
write_ordered_buffers(&journal->j_dirty_buffers_lock,
journal, jl, &jl->j_tail_bh_list);
- lock_kernel();
+ reiserfs_write_lock(sb);
}
BUG_ON(!list_empty(&jl->j_tail_bh_list));
mutex_unlock(&jl->j_commit_mutex);
diff --git a/fs/reiserfs/lock.c b/fs/reiserfs/lock.c
new file mode 100644
index 0000000..ee2cfc0
--- /dev/null
+++ b/fs/reiserfs/lock.c
@@ -0,0 +1,88 @@
+#include <linux/reiserfs_fs.h>
+#include <linux/mutex.h>
+
+/*
+ * The previous reiserfs locking scheme was heavily based on
+ * the tricky properties of the Bkl:
+ *
+ * - it was acquired recursively by a same task
+ * - the performances relied on the release-while-schedule() property
+ *
+ * Now that we replace it by a mutex, we still want to keep the same
+ * recursive property to avoid big changes in the code structure.
+ * We use our own lock_owner here because the owner field on a mutex
+ * is only available in SMP or mutex debugging, also we only need this field
+ * for this mutex, no need for a system wide mutex facility.
+ *
+ * Also this lock is often released before a call that could block because
+ * reiserfs performances were partialy based on the release while schedule()
+ * property of the Bkl.
+ */
+void reiserfs_write_lock(struct super_block *s)
+{
+ struct reiserfs_sb_info *sb_i = REISERFS_SB(s);
+
+ if (sb_i->lock_owner != current) {
+ mutex_lock(&sb_i->lock);
+ sb_i->lock_owner = current;
+ }
+
+ /* No need to protect it, only the current task touches it */
+ sb_i->lock_depth++;
+}
+
+void reiserfs_write_unlock(struct super_block *s)
+{
+ struct reiserfs_sb_info *sb_i = REISERFS_SB(s);
+
+ /*
+ * Are we unlocking without even holding the lock?
+ * Such a situation must raise a BUG() if we don't want
+ * to corrupt the data.
+ */
+ BUG_ON(sb_i->lock_owner != current);
+
+ if (--sb_i->lock_depth == -1) {
+ sb_i->lock_owner = NULL;
+ mutex_unlock(&sb_i->lock);
+ }
+}
+
+/*
+ * If we already own the lock, just exit and don't increase the depth.
+ * Useful when we don't want to lock more than once.
+ *
+ * We always return the lock_depth we had before calling
+ * this function.
+ */
+int reiserfs_write_lock_once(struct super_block *s)
+{
+ struct reiserfs_sb_info *sb_i = REISERFS_SB(s);
+
+ if (sb_i->lock_owner != current) {
+ mutex_lock(&sb_i->lock);
+ sb_i->lock_owner = current;
+ return sb_i->lock_depth++;
+ }
+
+ return sb_i->lock_depth;
+}
+
+void reiserfs_write_unlock_once(struct super_block *s, int lock_depth)
+{
+ if (lock_depth == -1)
+ reiserfs_write_unlock(s);
+}
+
+/*
+ * Utility function to force a BUG if it is called without the superblock
+ * write lock held. caller is the string printed just before calling BUG()
+ */
+void reiserfs_check_lock_depth(struct super_block *sb, char *caller)
+{
+ struct reiserfs_sb_info *sb_i = REISERFS_SB(sb);
+
+ if (sb_i->lock_depth < 0)
+ reiserfs_panic(sb, "%s called without kernel lock held %d",
+ caller);
+}
diff --git a/fs/reiserfs/namei.c b/fs/reiserfs/namei.c
index 2715791..e296ff7 100644
--- a/fs/reiserfs/namei.c
+++ b/fs/reiserfs/namei.c
@@ -324,6 +324,7 @@
struct nameidata *nd)
{
int retval;
+ int lock_depth;
struct inode *inode = NULL;
struct reiserfs_dir_entry de;
INITIALIZE_PATH(path_to_entry);
@@ -331,7 +332,13 @@
if (REISERFS_MAX_NAME(dir->i_sb->s_blocksize) < dentry->d_name.len)
return ERR_PTR(-ENAMETOOLONG);
- reiserfs_write_lock(dir->i_sb);
+ /*
+ * Might be called with or without the write lock, must be careful
+ * to not recursively hold it in case we want to release the lock
+ * before rescheduling.
+ */
+ lock_depth = reiserfs_write_lock_once(dir->i_sb);
+
de.de_gen_number_bit_string = NULL;
retval =
reiserfs_find_entry(dir, dentry->d_name.name, dentry->d_name.len,
@@ -341,7 +348,7 @@
inode = reiserfs_iget(dir->i_sb,
(struct cpu_key *)&(de.de_dir_id));
if (!inode || IS_ERR(inode)) {
- reiserfs_write_unlock(dir->i_sb);
+ reiserfs_write_unlock_once(dir->i_sb, lock_depth);
return ERR_PTR(-EACCES);
}
@@ -350,7 +357,7 @@
if (IS_PRIVATE(dir))
inode->i_flags |= S_PRIVATE;
}
- reiserfs_write_unlock(dir->i_sb);
+ reiserfs_write_unlock_once(dir->i_sb, lock_depth);
if (retval == IO_ERROR) {
return ERR_PTR(-EIO);
}
@@ -725,6 +732,7 @@
struct inode *inode;
struct reiserfs_transaction_handle th;
struct reiserfs_security_handle security;
+ int lock_depth;
/* We need blocks for transaction + (user+group)*(quotas for new inode + update of quota for directory owner) */
int jbegin_count =
JOURNAL_PER_BALANCE_CNT * 3 +
@@ -748,7 +756,7 @@
return retval;
}
jbegin_count += retval;
- reiserfs_write_lock(dir->i_sb);
+ lock_depth = reiserfs_write_lock_once(dir->i_sb);
retval = journal_begin(&th, dir->i_sb, jbegin_count);
if (retval) {
@@ -798,8 +806,8 @@
d_instantiate(dentry, inode);
unlock_new_inode(inode);
retval = journal_end(&th, dir->i_sb, jbegin_count);
- out_failed:
- reiserfs_write_unlock(dir->i_sb);
+out_failed:
+ reiserfs_write_unlock_once(dir->i_sb, lock_depth);
return retval;
}
diff --git a/fs/reiserfs/prints.c b/fs/reiserfs/prints.c
index 536eaca..adbc6f5 100644
--- a/fs/reiserfs/prints.c
+++ b/fs/reiserfs/prints.c
@@ -349,10 +349,6 @@
. */
-#ifdef CONFIG_REISERFS_CHECK
-extern struct tree_balance *cur_tb;
-#endif
-
void __reiserfs_panic(struct super_block *sb, const char *id,
const char *function, const char *fmt, ...)
{
diff --git a/fs/reiserfs/resize.c b/fs/reiserfs/resize.c
index 18b315d..b3a94d2 100644
--- a/fs/reiserfs/resize.c
+++ b/fs/reiserfs/resize.c
@@ -141,7 +141,9 @@
set_buffer_uptodate(bh);
mark_buffer_dirty(bh);
+ reiserfs_write_unlock(s);
sync_dirty_buffer(bh);
+ reiserfs_write_lock(s);
// update bitmap_info stuff
bitmap[i].free_count = sb_blocksize(sb) * 8 - 1;
brelse(bh);
diff --git a/fs/reiserfs/stree.c b/fs/reiserfs/stree.c
index d036ee5..5fa7118 100644
--- a/fs/reiserfs/stree.c
+++ b/fs/reiserfs/stree.c
@@ -222,9 +222,6 @@
return ITEM_NOT_FOUND;
}
-#ifdef CONFIG_REISERFS_CHECK
-extern struct tree_balance *cur_tb;
-#endif
/* Minimal possible key. It is never in the tree. */
const struct reiserfs_key MIN_KEY = { 0, 0, {{0, 0},} };
@@ -519,25 +516,48 @@
#define SEARCH_BY_KEY_READA 16
-/* The function is NOT SCHEDULE-SAFE! */
-static void search_by_key_reada(struct super_block *s,
+/*
+ * The function is NOT SCHEDULE-SAFE!
+ * It might unlock the write lock if we needed to wait for a block
+ * to be read. Note that in this case it won't recover the lock to avoid
+ * high contention resulting from too much lock requests, especially
+ * the caller (search_by_key) will perform other schedule-unsafe
+ * operations just after calling this function.
+ *
+ * @return true if we have unlocked
+ */
+static bool search_by_key_reada(struct super_block *s,
struct buffer_head **bh,
b_blocknr_t *b, int num)
{
int i, j;
+ bool unlocked = false;
for (i = 0; i < num; i++) {
bh[i] = sb_getblk(s, b[i]);
}
+ /*
+ * We are going to read some blocks on which we
+ * have a reference. It's safe, though we might be
+ * reading blocks concurrently changed if we release
+ * the lock. But it's still fine because we check later
+ * if the tree changed
+ */
for (j = 0; j < i; j++) {
/*
* note, this needs attention if we are getting rid of the BKL
* you have to make sure the prepared bit isn't set on this buffer
*/
- if (!buffer_uptodate(bh[j]))
+ if (!buffer_uptodate(bh[j])) {
+ if (!unlocked) {
+ reiserfs_write_unlock(s);
+ unlocked = true;
+ }
ll_rw_block(READA, 1, bh + j);
+ }
brelse(bh[j]);
}
+ return unlocked;
}
/**************************************************************************
@@ -625,11 +645,26 @@
have a pointer to it. */
if ((bh = last_element->pe_buffer =
sb_getblk(sb, block_number))) {
+ bool unlocked = false;
+
if (!buffer_uptodate(bh) && reada_count > 1)
- search_by_key_reada(sb, reada_bh,
+ /* may unlock the write lock */
+ unlocked = search_by_key_reada(sb, reada_bh,
reada_blocks, reada_count);
+ /*
+ * If we haven't already unlocked the write lock,
+ * then we need to do that here before reading
+ * the current block
+ */
+ if (!buffer_uptodate(bh) && !unlocked) {
+ reiserfs_write_unlock(sb);
+ unlocked = true;
+ }
ll_rw_block(READ, 1, &bh);
wait_on_buffer(bh);
+
+ if (unlocked)
+ reiserfs_write_lock(sb);
if (!buffer_uptodate(bh))
goto io_error;
} else {
@@ -673,7 +708,7 @@
!key_in_buffer(search_path, key, sb),
"PAP-5130: key is not in the buffer");
#ifdef CONFIG_REISERFS_CHECK
- if (cur_tb) {
+ if (REISERFS_SB(sb)->cur_tb) {
print_cur_tb("5140");
reiserfs_panic(sb, "PAP-5140",
"schedule occurred in do_balance!");
@@ -1024,7 +1059,9 @@
reiserfs_free_block(th, inode, block, 1);
}
+ reiserfs_write_unlock(sb);
cond_resched();
+ reiserfs_write_lock(sb);
if (item_moved (&s_ih, path)) {
need_re_search = 1;
diff --git a/fs/reiserfs/super.c b/fs/reiserfs/super.c
index f0ad05f..339b0ba 100644
--- a/fs/reiserfs/super.c
+++ b/fs/reiserfs/super.c
@@ -465,7 +465,7 @@
struct reiserfs_transaction_handle th;
th.t_trans_id = 0;
- lock_kernel();
+ reiserfs_write_lock(s);
if (s->s_dirt)
reiserfs_write_super(s);
@@ -499,10 +499,10 @@
reiserfs_proc_info_done(s);
+ reiserfs_write_unlock(s);
+ mutex_destroy(&REISERFS_SB(s)->lock);
kfree(s->s_fs_info);
s->s_fs_info = NULL;
-
- unlock_kernel();
}
static struct kmem_cache *reiserfs_inode_cachep;
@@ -554,25 +554,28 @@
struct reiserfs_transaction_handle th;
int err = 0;
+ int lock_depth;
+
if (inode->i_sb->s_flags & MS_RDONLY) {
reiserfs_warning(inode->i_sb, "clm-6006",
"writing inode %lu on readonly FS",
inode->i_ino);
return;
}
- reiserfs_write_lock(inode->i_sb);
+ lock_depth = reiserfs_write_lock_once(inode->i_sb);
/* this is really only used for atime updates, so they don't have
** to be included in O_SYNC or fsync
*/
err = journal_begin(&th, inode->i_sb, 1);
- if (err) {
- reiserfs_write_unlock(inode->i_sb);
- return;
- }
+ if (err)
+ goto out;
+
reiserfs_update_sd(&th, inode);
journal_end(&th, inode->i_sb, 1);
- reiserfs_write_unlock(inode->i_sb);
+
+out:
+ reiserfs_write_unlock_once(inode->i_sb, lock_depth);
}
#ifdef CONFIG_QUOTA
@@ -1168,11 +1171,14 @@
unsigned int qfmt = 0;
#ifdef CONFIG_QUOTA
int i;
+#endif
+ reiserfs_write_lock(s);
+
+#ifdef CONFIG_QUOTA
memcpy(qf_names, REISERFS_SB(s)->s_qf_names, sizeof(qf_names));
#endif
- lock_kernel();
rs = SB_DISK_SUPER_BLOCK(s);
if (!reiserfs_parse_options
@@ -1295,12 +1301,12 @@
out_ok:
replace_mount_options(s, new_opts);
- unlock_kernel();
+ reiserfs_write_unlock(s);
return 0;
out_err:
kfree(new_opts);
- unlock_kernel();
+ reiserfs_write_unlock(s);
return err;
}
@@ -1404,7 +1410,9 @@
static int reread_meta_blocks(struct super_block *s)
{
ll_rw_block(READ, 1, &(SB_BUFFER_WITH_SB(s)));
+ reiserfs_write_unlock(s);
wait_on_buffer(SB_BUFFER_WITH_SB(s));
+ reiserfs_write_lock(s);
if (!buffer_uptodate(SB_BUFFER_WITH_SB(s))) {
reiserfs_warning(s, "reiserfs-2504", "error reading the super");
return 1;
@@ -1613,7 +1621,7 @@
sbi = kzalloc(sizeof(struct reiserfs_sb_info), GFP_KERNEL);
if (!sbi) {
errval = -ENOMEM;
- goto error;
+ goto error_alloc;
}
s->s_fs_info = sbi;
/* Set default values for options: non-aggressive tails, RO on errors */
@@ -1627,6 +1635,20 @@
/* setup default block allocator options */
reiserfs_init_alloc_options(s);
+ mutex_init(&REISERFS_SB(s)->lock);
+ REISERFS_SB(s)->lock_depth = -1;
+
+ /*
+ * This function is called with the bkl, which also was the old
+ * locking used here.
+ * do_journal_begin() will soon check if we hold the lock (ie: was the
+ * bkl). This is likely because do_journal_begin() has several another
+ * callers because at this time, it doesn't seem to be necessary to
+ * protect against anything.
+ * Anyway, let's be conservative and lock for now.
+ */
+ reiserfs_write_lock(s);
+
jdev_name = NULL;
if (reiserfs_parse_options
(s, (char *)data, &(sbi->s_mount_opt), &blocks, &jdev_name,
@@ -1852,9 +1874,13 @@
init_waitqueue_head(&(sbi->s_wait));
spin_lock_init(&sbi->bitmap_lock);
+ reiserfs_write_unlock(s);
+
return (0);
error:
+ reiserfs_write_unlock(s);
+error_alloc:
if (jinit_done) { /* kill the commit thread, free journal ram */
journal_release_error(NULL, s);
}
diff --git a/fs/reiserfs/xattr.c b/fs/reiserfs/xattr.c
index 6925b83..58aa8e7 100644
--- a/fs/reiserfs/xattr.c
+++ b/fs/reiserfs/xattr.c
@@ -975,7 +975,7 @@
int err = 0;
/* If we don't have the privroot located yet - go find it */
- mutex_lock(&s->s_root->d_inode->i_mutex);
+ reiserfs_mutex_lock_safe(&s->s_root->d_inode->i_mutex, s);
dentry = lookup_one_len(PRIVROOT_NAME, s->s_root,
strlen(PRIVROOT_NAME));
if (!IS_ERR(dentry)) {
@@ -1004,14 +1004,14 @@
goto error;
if (!privroot->d_inode && !(mount_flags & MS_RDONLY)) {
- mutex_lock(&s->s_root->d_inode->i_mutex);
+ reiserfs_mutex_lock_safe(&s->s_root->d_inode->i_mutex, s);
err = create_privroot(REISERFS_SB(s)->priv_root);
mutex_unlock(&s->s_root->d_inode->i_mutex);
}
if (privroot->d_inode) {
s->s_xattr = reiserfs_xattr_handlers;
- mutex_lock(&privroot->d_inode->i_mutex);
+ reiserfs_mutex_lock_safe(&privroot->d_inode->i_mutex, s);
if (!REISERFS_SB(s)->xattr_root) {
struct dentry *dentry;
dentry = lookup_one_len(XAROOT_NAME, privroot,
diff --git a/fs/ubifs/debug.c b/fs/ubifs/debug.c
index dbc093a..8a771c5 100644
--- a/fs/ubifs/debug.c
+++ b/fs/ubifs/debug.c
@@ -2014,7 +2014,7 @@
inum = key_inum_flash(c, &dent->key);
fscki1 = read_add_inode(c, priv, inum);
if (IS_ERR(fscki1)) {
- err = PTR_ERR(fscki);
+ err = PTR_ERR(fscki1);
ubifs_err("error %d while processing entry node and "
"trying to find parent inode node %lu",
err, (unsigned long)inum);
diff --git a/fs/ubifs/file.c b/fs/ubifs/file.c
index 1009adc..39849f8 100644
--- a/fs/ubifs/file.c
+++ b/fs/ubifs/file.c
@@ -1389,7 +1389,6 @@
unsigned long nr_segs, loff_t pos)
{
int err;
- ssize_t ret;
struct inode *inode = iocb->ki_filp->f_mapping->host;
struct ubifs_info *c = inode->i_sb->s_fs_info;
@@ -1397,17 +1396,7 @@
if (err)
return err;
- ret = generic_file_aio_write(iocb, iov, nr_segs, pos);
- if (ret < 0)
- return ret;
-
- if (ret > 0 && (IS_SYNC(inode) || iocb->ki_filp->f_flags & O_SYNC)) {
- err = ubifs_sync_wbufs_by_inode(c, inode);
- if (err)
- return err;
- }
-
- return ret;
+ return generic_file_aio_write(iocb, iov, nr_segs, pos);
}
static int ubifs_set_page_dirty(struct page *page)
diff --git a/fs/ubifs/recovery.c b/fs/ubifs/recovery.c
index f94ddf7..868a55e 100644
--- a/fs/ubifs/recovery.c
+++ b/fs/ubifs/recovery.c
@@ -23,7 +23,7 @@
/*
* This file implements functions needed to recover from unclean un-mounts.
* When UBIFS is mounted, it checks a flag on the master node to determine if
- * an un-mount was completed sucessfully. If not, the process of mounting
+ * an un-mount was completed successfully. If not, the process of mounting
* incorparates additional checking and fixing of on-flash data structures.
* UBIFS always cleans away all remnants of an unclean un-mount, so that
* errors do not accumulate. However UBIFS defers recovery if it is mounted
diff --git a/fs/ubifs/super.c b/fs/ubifs/super.c
index 333e181..943ad56 100644
--- a/fs/ubifs/super.c
+++ b/fs/ubifs/super.c
@@ -1842,22 +1842,32 @@
* @name: UBI volume name
* @mode: UBI volume open mode
*
- * There are several ways to specify UBI volumes when mounting UBIFS:
- * o ubiX_Y - UBI device number X, volume Y;
- * o ubiY - UBI device number 0, volume Y;
+ * The primary method of mounting UBIFS is by specifying the UBI volume
+ * character device node path. However, UBIFS may also be mounted withoug any
+ * character device node using one of the following methods:
+ *
+ * o ubiX_Y - mount UBI device number X, volume Y;
+ * o ubiY - mount UBI device number 0, volume Y;
* o ubiX:NAME - mount UBI device X, volume with name NAME;
* o ubi:NAME - mount UBI device 0, volume with name NAME.
*
* Alternative '!' separator may be used instead of ':' (because some shells
* like busybox may interpret ':' as an NFS host name separator). This function
- * returns ubi volume object in case of success and a negative error code in
- * case of failure.
+ * returns UBI volume description object in case of success and a negative
+ * error code in case of failure.
*/
static struct ubi_volume_desc *open_ubi(const char *name, int mode)
{
+ struct ubi_volume_desc *ubi;
int dev, vol;
char *endptr;
+ /* First, try to open using the device node path method */
+ ubi = ubi_open_volume_path(name, mode);
+ if (!IS_ERR(ubi))
+ return ubi;
+
+ /* Try the "nodev" method */
if (name[0] != 'u' || name[1] != 'b' || name[2] != 'i')
return ERR_PTR(-EINVAL);
diff --git a/fs/xfs/quota/xfs_dquot.h b/fs/xfs/quota/xfs_dquot.h
index 6533ead..a2c16bc 100644
--- a/fs/xfs/quota/xfs_dquot.h
+++ b/fs/xfs/quota/xfs_dquot.h
@@ -98,7 +98,7 @@
#define dq_flags q_lists.dqm_flags
/*
- * Lock hierachy for q_qlock:
+ * Lock hierarchy for q_qlock:
* XFS_QLOCK_NORMAL is the implicit default,
* XFS_QLOCK_NESTED is the dquot with the higher id in xfs_dqlock2
*/
diff --git a/include/acpi/acpixf.h b/include/acpi/acpixf.h
index e723b0f..5e1ad3c 100644
--- a/include/acpi/acpixf.h
+++ b/include/acpi/acpixf.h
@@ -47,7 +47,7 @@
/* Current ACPICA subsystem version in YYYYMMDD format */
-#define ACPI_CA_VERSION 0x20090903
+#define ACPI_CA_VERSION 0x20091112
#include "actypes.h"
#include "actbl.h"
@@ -154,7 +154,8 @@
acpi_walk_namespace(acpi_object_type type,
acpi_handle start_object,
u32 max_depth,
- acpi_walk_callback user_function,
+ acpi_walk_callback pre_order_visit,
+ acpi_walk_callback post_order_visit,
void *context, void **return_value);
acpi_status
diff --git a/include/asm-generic/memory_model.h b/include/asm-generic/memory_model.h
index 4c8d0af..fb2d63f 100644
--- a/include/asm-generic/memory_model.h
+++ b/include/asm-generic/memory_model.h
@@ -47,7 +47,7 @@
#elif defined(CONFIG_SPARSEMEM_VMEMMAP)
-/* memmap is virtually contigious. */
+/* memmap is virtually contiguous. */
#define __pfn_to_page(pfn) (vmemmap + (pfn))
#define __page_to_pfn(page) (unsigned long)((page) - vmemmap)
diff --git a/include/asm-generic/unistd.h b/include/asm-generic/unistd.h
index d76b66a..7c38c14 100644
--- a/include/asm-generic/unistd.h
+++ b/include/asm-generic/unistd.h
@@ -631,7 +631,7 @@
* these are provided for both review and as a porting
* help for the C library version.
*
- * Last chance: are any of these important enought to
+ * Last chance: are any of these important enough to
* enable by default?
*/
#ifdef __ARCH_WANT_SYSCALL_NO_AT
diff --git a/include/linux/cciss_ioctl.h b/include/linux/cciss_ioctl.h
index cb57c30..eb130b4 100644
--- a/include/linux/cciss_ioctl.h
+++ b/include/linux/cciss_ioctl.h
@@ -39,7 +39,7 @@
#ifndef CCISS_CMD_H
// This defines are duplicated in cciss_cmd.h in the driver directory
-//general boundary defintions
+//general boundary definitions
#define SENSEINFOBYTES 32//note that this value may vary between host implementations
//Command Status value
diff --git a/include/linux/chio.h b/include/linux/chio.h
index 519248d..d9bac7f 100644
--- a/include/linux/chio.h
+++ b/include/linux/chio.h
@@ -21,7 +21,7 @@
* query vendor-specific element types
*
* accessing elements works by specifing type and unit of the element.
- * for eample, storage elements are addressed with type = CHET_ST and
+ * for example, storage elements are addressed with type = CHET_ST and
* unit = 0 .. cp_nslots-1
*
*/
diff --git a/include/linux/dm-log-userspace.h b/include/linux/dm-log-userspace.h
index 8a1f972..0c3c3a2 100644
--- a/include/linux/dm-log-userspace.h
+++ b/include/linux/dm-log-userspace.h
@@ -363,7 +363,7 @@
* various request types above. The remaining 24-bits are currently
* set to zero and are reserved for future use and compatibility concerns.
*
- * User-space should always use DM_ULOG_REQUEST_TYPE to aquire the
+ * User-space should always use DM_ULOG_REQUEST_TYPE to acquire the
* request type from the 'request_type' field to maintain forward compatibility.
*/
#define DM_ULOG_REQUEST_MASK 0xFF
diff --git a/include/linux/fb.h b/include/linux/fb.h
index de9c722..369767b 100644
--- a/include/linux/fb.h
+++ b/include/linux/fb.h
@@ -763,6 +763,7 @@
* takes over; acceleration engine should be in a quiescent state */
/* hints */
+#define FBINFO_VIRTFB 0x0004 /* FB is System RAM, not device. */
#define FBINFO_PARTIAL_PAN_OK 0x0040 /* otw use pan only for double-buffering */
#define FBINFO_READS_FAST 0x0080 /* soft-copy faster than rendering */
diff --git a/include/linux/hid.h b/include/linux/hid.h
index 10f6284..8709365 100644
--- a/include/linux/hid.h
+++ b/include/linux/hid.h
@@ -312,6 +312,7 @@
#define HID_QUIRK_MULTI_INPUT 0x00000040
#define HID_QUIRK_SKIP_OUTPUT_REPORTS 0x00010000
#define HID_QUIRK_FULLSPEED_INTERVAL 0x10000000
+#define HID_QUIRK_NO_INIT_REPORTS 0x20000000
/*
* This is the global environment of the parser. This information is
diff --git a/include/linux/ide.h b/include/linux/ide.h
index e4135d6..0ec6129 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -125,8 +125,8 @@
* Timeouts for various operations:
*/
enum {
- /* spec allows up to 20ms */
- WAIT_DRQ = HZ / 10, /* 100ms */
+ /* spec allows up to 20ms, but CF cards and SSD drives need more */
+ WAIT_DRQ = 1 * HZ, /* 1s */
/* some laptops are very slow */
WAIT_READY = 5 * HZ, /* 5s */
/* should be less than 3ms (?), if all ATAPI CD is closed at boot */
diff --git a/include/linux/in6.h b/include/linux/in6.h
index dfa2916..bd55c6e 100644
--- a/include/linux/in6.h
+++ b/include/linux/in6.h
@@ -110,7 +110,7 @@
#define IPV6_FLOWINFO_FLOWLABEL 0x000fffff
#define IPV6_FLOWINFO_PRIORITY 0x0ff00000
-/* These defintions are obsolete */
+/* These definitions are obsolete */
#define IPV6_PRIORITY_UNCHARACTERIZED 0x0000
#define IPV6_PRIORITY_FILLER 0x0100
#define IPV6_PRIORITY_UNATTENDED 0x0200
diff --git a/include/linux/input-polldev.h b/include/linux/input-polldev.h
index 597a007..5e3dddf 100644
--- a/include/linux/input-polldev.h
+++ b/include/linux/input-polldev.h
@@ -14,12 +14,19 @@
/**
* struct input_polled_dev - simple polled input device
- * @private: private driver data
- * @flush: driver-supplied method that flushes device's state upon
- * opening (optional)
+ * @private: private driver data.
+ * @open: driver-supplied method that prepares device for polling
+ * (enabled the device and maybe flushes device state).
+ * @close: driver-supplied method that is called when device is no
+ * longer being polled. Used to put device into low power mode.
* @poll: driver-supplied method that polls the device and posts
* input events (mandatory).
- * @poll_interval: specifies how often the poll() method shoudl be called.
+ * @poll_interval: specifies how often the poll() method should be called.
+ * Defaults to 500 msec unless overriden when registering the device.
+ * @poll_interval_max: specifies upper bound for the poll interval.
+ * Defaults to the initial value of @poll_interval.
+ * @poll_interval_min: specifies lower bound for the poll interval.
+ * Defaults to 0.
* @input: input device structire associated with the polled device.
* Must be properly initialized by the driver (id, name, phys, bits).
*
@@ -30,11 +37,16 @@
struct input_polled_dev {
void *private;
- void (*flush)(struct input_polled_dev *dev);
+ void (*open)(struct input_polled_dev *dev);
+ void (*close)(struct input_polled_dev *dev);
void (*poll)(struct input_polled_dev *dev);
unsigned int poll_interval; /* msec */
+ unsigned int poll_interval_max; /* msec */
+ unsigned int poll_interval_min; /* msec */
struct input_dev *input;
+
+/* private: */
struct delayed_work work;
};
diff --git a/include/linux/input.h b/include/linux/input.h
index 84b501a..7be8a65 100644
--- a/include/linux/input.h
+++ b/include/linux/input.h
@@ -895,7 +895,7 @@
struct ff_envelope envelope;
__u32 custom_len;
- __s16 *custom_data;
+ __s16 __user *custom_data;
};
/**
@@ -1021,9 +1021,12 @@
* @keycodesize: size of elements in keycode table
* @keycode: map of scancodes to keycodes for this device
* @setkeycode: optional method to alter current keymap, used to implement
- * sparse keymaps. If not supplied default mechanism will be used
+ * sparse keymaps. If not supplied default mechanism will be used.
+ * The method is being called while holding event_lock and thus must
+ * not sleep
* @getkeycode: optional method to retrieve current keymap. If not supplied
- * default mechanism will be used
+ * default mechanism will be used. The method is being called while
+ * holding event_lock and thus must not sleep
* @ff: force feedback structure associated with the device if device
* supports force feedback effects
* @repeat_key: stores key code of the last key pressed; used to implement
@@ -1040,6 +1043,7 @@
* @absmin: minimum values for events coming from absolute axes
* @absfuzz: describes noisiness for axes
* @absflat: size of the center flat position (used by joydev)
+ * @absres: resolution used for events coming form absolute axes
* @open: this method is called when the very first user calls
* input_open_device(). The driver must prepare the device
* to start generating events (start polling thread,
@@ -1294,6 +1298,9 @@
int __must_check input_register_handler(struct input_handler *);
void input_unregister_handler(struct input_handler *);
+int input_handler_for_each_handle(struct input_handler *, void *data,
+ int (*fn)(struct input_handle *, void *));
+
int input_register_handle(struct input_handle *);
void input_unregister_handle(struct input_handle *);
diff --git a/include/linux/input/matrix_keypad.h b/include/linux/input/matrix_keypad.h
index b3cd42d5..3bd018b 100644
--- a/include/linux/input/matrix_keypad.h
+++ b/include/linux/input/matrix_keypad.h
@@ -41,6 +41,9 @@
* @col_scan_delay_us: delay, measured in microseconds, that is
* needed before we can keypad after activating column gpio
* @debounce_ms: debounce interval in milliseconds
+ * @active_low: gpio polarity
+ * @wakeup: controls whether the device should be set up as wakeup
+ * source
*
* This structure represents platform-specific data that use used by
* matrix_keypad driver to perform proper initialization.
diff --git a/arch/sh/include/asm/sh_keysc.h b/include/linux/input/sh_keysc.h
similarity index 75%
rename from arch/sh/include/asm/sh_keysc.h
rename to include/linux/input/sh_keysc.h
index 4a65b1e..c211b5c 100644
--- a/arch/sh/include/asm/sh_keysc.h
+++ b/include/linux/input/sh_keysc.h
@@ -1,5 +1,5 @@
-#ifndef __ASM_KEYSC_H__
-#define __ASM_KEYSC_H__
+#ifndef __SH_KEYSC_H__
+#define __SH_KEYSC_H__
#define SH_KEYSC_MAXKEYS 30
@@ -11,4 +11,4 @@
int keycodes[SH_KEYSC_MAXKEYS];
};
-#endif /* __ASM_KEYSC_H__ */
+#endif /* __SH_KEYSC_H__ */
diff --git a/include/linux/input/sparse-keymap.h b/include/linux/input/sparse-keymap.h
new file mode 100644
index 0000000..52db620
--- /dev/null
+++ b/include/linux/input/sparse-keymap.h
@@ -0,0 +1,62 @@
+#ifndef _SPARSE_KEYMAP_H
+#define _SPARSE_KEYMAP_H
+
+/*
+ * Copyright (c) 2009 Dmitry Torokhov
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#define KE_END 0 /* Indicates end of keymap */
+#define KE_KEY 1 /* Ordinary key/button */
+#define KE_SW 2 /* Switch (predetermined value) */
+#define KE_VSW 3 /* Switch (value supplied at runtime) */
+#define KE_IGNORE 4 /* Known entry that should be ignored */
+#define KE_LAST KE_IGNORE
+
+/**
+ * struct key_entry - keymap entry for use in sparse keymap
+ * @type: Type of the key entry (KE_KEY, KE_SW, KE_VSW, KE_END);
+ * drivers are allowed to extend the list with their own
+ * private definitions.
+ * @code: Device-specific data identifying the button/switch
+ * @keycode: KEY_* code assigned to a key/button
+ * @sw.code: SW_* code assigned to a switch
+ * @sw.value: Value that should be sent in an input even when KE_SW
+ * switch is toggled. KE_VSW switches ignore this field and
+ * expect driver to supply value for the event.
+ *
+ * This structure defines an entry in a sparse keymap used by some
+ * input devices for which traditional table-based approach is not
+ * suitable.
+ */
+struct key_entry {
+ int type; /* See KE_* above */
+ u32 code;
+ union {
+ u16 keycode; /* For KE_KEY */
+ struct { /* For KE_SW, KE_VSW */
+ u8 code;
+ u8 value; /* For KE_SW, ignored by KE_VSW */
+ } sw;
+ };
+};
+
+struct key_entry *sparse_keymap_entry_from_scancode(struct input_dev *dev,
+ unsigned int code);
+struct key_entry *sparse_keymap_entry_from_keycode(struct input_dev *dev,
+ unsigned int code);
+int sparse_keymap_setup(struct input_dev *dev,
+ const struct key_entry *keymap,
+ int (*setup)(struct input_dev *, struct key_entry *));
+void sparse_keymap_free(struct input_dev *dev);
+
+void sparse_keymap_report_entry(struct input_dev *dev, const struct key_entry *ke,
+ unsigned int value, bool autorelease);
+
+bool sparse_keymap_report_event(struct input_dev *dev, unsigned int code,
+ unsigned int value, bool autorelease);
+
+#endif /* _SPARSE_KEYMAP_H */
diff --git a/include/linux/irq.h b/include/linux/irq.h
index ae9653d..a287cfc 100644
--- a/include/linux/irq.h
+++ b/include/linux/irq.h
@@ -282,7 +282,7 @@
/*
* Built-in IRQ handlers for various IRQ types,
- * callable via desc->chip->handle_irq()
+ * callable via desc->handle_irq()
*/
extern void handle_level_irq(unsigned int irq, struct irq_desc *desc);
extern void handle_fasteoi_irq(unsigned int irq, struct irq_desc *desc);
diff --git a/include/linux/libata.h b/include/linux/libata.h
index a5b3dc7..6a9c4dd 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -1024,7 +1024,7 @@
extern int ata_scsi_slave_config(struct scsi_device *sdev);
extern void ata_scsi_slave_destroy(struct scsi_device *sdev);
extern int ata_scsi_change_queue_depth(struct scsi_device *sdev,
- int queue_depth);
+ int queue_depth, int reason);
extern struct ata_device *ata_dev_pair(struct ata_device *adev);
extern int ata_do_set_mode(struct ata_link *link, struct ata_device **r_failed_dev);
diff --git a/include/linux/mfd/ezx-pcap.h b/include/linux/mfd/ezx-pcap.h
index e5124ce..3402042 100644
--- a/include/linux/mfd/ezx-pcap.h
+++ b/include/linux/mfd/ezx-pcap.h
@@ -45,7 +45,7 @@
#define PCAP_CLEAR_INTERRUPT_REGISTER 0x01ffffff
#define PCAP_MASK_ALL_INTERRUPT 0x01ffffff
-/* registers acessible by both pcap ports */
+/* registers accessible by both pcap ports */
#define PCAP_REG_ISR 0x0 /* Interrupt Status */
#define PCAP_REG_MSR 0x1 /* Interrupt Mask */
#define PCAP_REG_PSTAT 0x2 /* Processor Status */
@@ -67,7 +67,7 @@
#define PCAP_REG_VENDOR_TEST1 0x1e
#define PCAP_REG_VENDOR_TEST2 0x1f
-/* registers acessible by pcap port 1 only (a1200, e2 & e6) */
+/* registers accessible by pcap port 1 only (a1200, e2 & e6) */
#define PCAP_REG_INT_SEL 0x3 /* Interrupt Select */
#define PCAP_REG_SWCTRL 0x4 /* Switching Regulator Control */
#define PCAP_REG_VREG1 0x5 /* Regulator Bank 1 Control */
diff --git a/include/linux/mfd/sh_mobile_sdhi.h b/include/linux/mfd/sh_mobile_sdhi.h
new file mode 100644
index 0000000..3bcd716
--- /dev/null
+++ b/include/linux/mfd/sh_mobile_sdhi.h
@@ -0,0 +1,8 @@
+#ifndef __SH_MOBILE_SDHI_H__
+#define __SH_MOBILE_SDHI_H__
+
+struct sh_mobile_sdhi_info {
+ void (*set_pwr)(struct platform_device *pdev, int state);
+};
+
+#endif /* __SH_MOBILE_SDHI_H__ */
diff --git a/include/linux/mtd/ubi.h b/include/linux/mtd/ubi.h
index 6913b71..b31bd9e 100644
--- a/include/linux/mtd/ubi.h
+++ b/include/linux/mtd/ubi.h
@@ -174,6 +174,8 @@
struct ubi_volume_desc *ubi_open_volume(int ubi_num, int vol_id, int mode);
struct ubi_volume_desc *ubi_open_volume_nm(int ubi_num, const char *name,
int mode);
+struct ubi_volume_desc *ubi_open_volume_path(const char *pathname, int mode);
+
int ubi_register_volume_notifier(struct notifier_block *nb,
int ignore_existing);
int ubi_unregister_volume_notifier(struct notifier_block *nb);
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index cabf074..eae1f86 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -1587,6 +1587,8 @@
#define PCI_VENDOR_ID_COMPEX 0x11f6
#define PCI_DEVICE_ID_COMPEX_ENET100VG4 0x0112
+#define PCI_VENDOR_ID_PMC_Sierra 0x11f8
+
#define PCI_VENDOR_ID_RP 0x11fe
#define PCI_DEVICE_ID_RP32INTF 0x0001
#define PCI_DEVICE_ID_RP8INTF 0x0002
diff --git a/include/linux/pktcdvd.h b/include/linux/pktcdvd.h
index d745f5b..76e5053 100644
--- a/include/linux/pktcdvd.h
+++ b/include/linux/pktcdvd.h
@@ -30,7 +30,7 @@
/*
* use drive write caching -- we need deferred error handling to be
- * able to sucessfully recover with this option (drive will return good
+ * able to successfully recover with this option (drive will return good
* status as soon as the cdb is validated).
*/
#if defined(CONFIG_CDROM_PKTCDVD_WCACHE)
diff --git a/include/linux/reiserfs_fs.h b/include/linux/reiserfs_fs.h
index dd31e7b..a05b4a2 100644
--- a/include/linux/reiserfs_fs.h
+++ b/include/linux/reiserfs_fs.h
@@ -52,11 +52,63 @@
#define REISERFS_IOC32_GETVERSION FS_IOC32_GETVERSION
#define REISERFS_IOC32_SETVERSION FS_IOC32_SETVERSION
-/* Locking primitives */
-/* Right now we are still falling back to (un)lock_kernel, but eventually that
- would evolve into real per-fs locks */
-#define reiserfs_write_lock( sb ) lock_kernel()
-#define reiserfs_write_unlock( sb ) unlock_kernel()
+/*
+ * Locking primitives. The write lock is a per superblock
+ * special mutex that has properties close to the Big Kernel Lock
+ * which was used in the previous locking scheme.
+ */
+void reiserfs_write_lock(struct super_block *s);
+void reiserfs_write_unlock(struct super_block *s);
+int reiserfs_write_lock_once(struct super_block *s);
+void reiserfs_write_unlock_once(struct super_block *s, int lock_depth);
+
+/*
+ * Several mutexes depend on the write lock.
+ * However sometimes we want to relax the write lock while we hold
+ * these mutexes, according to the release/reacquire on schedule()
+ * properties of the Bkl that were used.
+ * Reiserfs performances and locking were based on this scheme.
+ * Now that the write lock is a mutex and not the bkl anymore, doing so
+ * may result in a deadlock:
+ *
+ * A acquire write_lock
+ * A acquire j_commit_mutex
+ * A release write_lock and wait for something
+ * B acquire write_lock
+ * B can't acquire j_commit_mutex and sleep
+ * A can't acquire write lock anymore
+ * deadlock
+ *
+ * What we do here is avoiding such deadlock by playing the same game
+ * than the Bkl: if we can't acquire a mutex that depends on the write lock,
+ * we release the write lock, wait a bit and then retry.
+ *
+ * The mutexes concerned by this hack are:
+ * - The commit mutex of a journal list
+ * - The flush mutex
+ * - The journal lock
+ * - The inode mutex
+ */
+static inline void reiserfs_mutex_lock_safe(struct mutex *m,
+ struct super_block *s)
+{
+ reiserfs_write_unlock(s);
+ mutex_lock(m);
+ reiserfs_write_lock(s);
+}
+
+/*
+ * When we schedule, we usually want to also release the write lock,
+ * according to the previous bkl based locking scheme of reiserfs.
+ */
+static inline void reiserfs_cond_resched(struct super_block *s)
+{
+ if (need_resched()) {
+ reiserfs_write_unlock(s);
+ schedule();
+ reiserfs_write_lock(s);
+ }
+}
struct fid;
@@ -1329,7 +1381,11 @@
#define get_generation(s) atomic_read (&fs_generation(s))
#define FILESYSTEM_CHANGED_TB(tb) (get_generation((tb)->tb_sb) != (tb)->fs_gen)
#define __fs_changed(gen,s) (gen != get_generation (s))
-#define fs_changed(gen,s) ({cond_resched(); __fs_changed(gen, s);})
+#define fs_changed(gen,s) \
+({ \
+ reiserfs_cond_resched(s); \
+ __fs_changed(gen, s); \
+})
/***************************************************************************/
/* FIXATE NODES */
@@ -2258,8 +2314,7 @@
#define SPARE_SPACE 500
/* prototypes from ioctl.c */
-int reiserfs_ioctl(struct inode *inode, struct file *filp,
- unsigned int cmd, unsigned long arg);
+long reiserfs_ioctl(struct file *filp, unsigned int cmd, unsigned long arg);
long reiserfs_compat_ioctl(struct file *filp,
unsigned int cmd, unsigned long arg);
int reiserfs_unpack(struct inode *inode, struct file *filp);
diff --git a/include/linux/reiserfs_fs_sb.h b/include/linux/reiserfs_fs_sb.h
index dab68bb..52c83b6 100644
--- a/include/linux/reiserfs_fs_sb.h
+++ b/include/linux/reiserfs_fs_sb.h
@@ -7,6 +7,8 @@
#ifdef __KERNEL__
#include <linux/workqueue.h>
#include <linux/rwsem.h>
+#include <linux/mutex.h>
+#include <linux/sched.h>
#endif
typedef enum {
@@ -355,6 +357,13 @@
struct reiserfs_journal *s_journal; /* pointer to journal information */
unsigned short s_mount_state; /* reiserfs state (valid, invalid) */
+ /* Serialize writers access, replace the old bkl */
+ struct mutex lock;
+ /* Owner of the lock (can be recursive) */
+ struct task_struct *lock_owner;
+ /* Depth of the lock, start from -1 like the bkl */
+ int lock_depth;
+
/* Comment? -Hans */
void (*end_io_handler) (struct buffer_head *, int);
hashf_t s_hash_function; /* pointer to function which is used
@@ -408,6 +417,17 @@
char *s_qf_names[MAXQUOTAS];
int s_jquota_fmt;
#endif
+#ifdef CONFIG_REISERFS_CHECK
+
+ struct tree_balance *cur_tb; /*
+ * Detects whether more than one
+ * copy of tb exists per superblock
+ * as a means of checking whether
+ * do_balance is executing concurrently
+ * against another tree reader/writer
+ * on a same mount point.
+ */
+#endif
};
/* Definitions of reiserfs on-disk properties: */
diff --git a/include/linux/serial_reg.h b/include/linux/serial_reg.h
index 850db2e..cf9327c 100644
--- a/include/linux/serial_reg.h
+++ b/include/linux/serial_reg.h
@@ -216,10 +216,10 @@
#define UART_IIR_TOD 0x08 /* Character Timeout Indication Detected */
-#define UART_FCR_PXAR1 0x00 /* receive FIFO treshold = 1 */
-#define UART_FCR_PXAR8 0x40 /* receive FIFO treshold = 8 */
-#define UART_FCR_PXAR16 0x80 /* receive FIFO treshold = 16 */
-#define UART_FCR_PXAR32 0xc0 /* receive FIFO treshold = 32 */
+#define UART_FCR_PXAR1 0x00 /* receive FIFO threshold = 1 */
+#define UART_FCR_PXAR8 0x40 /* receive FIFO threshold = 8 */
+#define UART_FCR_PXAR16 0x80 /* receive FIFO threshold = 16 */
+#define UART_FCR_PXAR32 0xc0 /* receive FIFO threshold = 32 */
diff --git a/include/linux/serio.h b/include/linux/serio.h
index a640bc2..e2f3044 100644
--- a/include/linux/serio.h
+++ b/include/linux/serio.h
@@ -215,5 +215,6 @@
#define SERIO_INEXIO 0x37
#define SERIO_TOUCHIT213 0x38
#define SERIO_W8001 0x39
+#define SERIO_DYNAPRO 0x3a
#endif
diff --git a/include/linux/sh_intc.h b/include/linux/sh_intc.h
index 68e212f..4ef246f 100644
--- a/include/linux/sh_intc.h
+++ b/include/linux/sh_intc.h
@@ -57,10 +57,8 @@
struct intc_sense_reg *sense_regs;
unsigned int nr_sense_regs;
char *name;
-#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A)
struct intc_mask_reg *ack_regs;
unsigned int nr_ack_regs;
-#endif
};
#define _INTC_ARRAY(a) a, sizeof(a)/sizeof(*a)
@@ -73,7 +71,6 @@
chipname, \
}
-#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A)
#define DECLARE_INTC_DESC_ACK(symbol, chipname, vectors, groups, \
mask_regs, prio_regs, sense_regs, ack_regs) \
struct intc_desc symbol __initdata = { \
@@ -83,9 +80,11 @@
chipname, \
_INTC_ARRAY(ack_regs), \
}
-#endif
void __init register_intc_controller(struct intc_desc *desc);
int intc_set_priority(unsigned int irq, unsigned int prio);
+int reserve_irq_vector(unsigned int irq);
+void reserve_irq_legacy(void);
+
#endif /* __SH_INTC_H */
diff --git a/include/linux/sh_pfc.h b/include/linux/sh_pfc.h
new file mode 100644
index 0000000..07c08af
--- /dev/null
+++ b/include/linux/sh_pfc.h
@@ -0,0 +1,96 @@
+/*
+ * SuperH Pin Function Controller Support
+ *
+ * Copyright (c) 2008 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef __SH_PFC_H
+#define __SH_PFC_H
+
+#include <asm-generic/gpio.h>
+
+typedef unsigned short pinmux_enum_t;
+typedef unsigned short pinmux_flag_t;
+
+#define PINMUX_TYPE_NONE 0
+#define PINMUX_TYPE_FUNCTION 1
+#define PINMUX_TYPE_GPIO 2
+#define PINMUX_TYPE_OUTPUT 3
+#define PINMUX_TYPE_INPUT 4
+#define PINMUX_TYPE_INPUT_PULLUP 5
+#define PINMUX_TYPE_INPUT_PULLDOWN 6
+
+#define PINMUX_FLAG_TYPE (0x7)
+#define PINMUX_FLAG_WANT_PULLUP (1 << 3)
+#define PINMUX_FLAG_WANT_PULLDOWN (1 << 4)
+
+#define PINMUX_FLAG_DBIT_SHIFT 5
+#define PINMUX_FLAG_DBIT (0x1f << PINMUX_FLAG_DBIT_SHIFT)
+#define PINMUX_FLAG_DREG_SHIFT 10
+#define PINMUX_FLAG_DREG (0x3f << PINMUX_FLAG_DREG_SHIFT)
+
+struct pinmux_gpio {
+ pinmux_enum_t enum_id;
+ pinmux_flag_t flags;
+};
+
+#define PINMUX_GPIO(gpio, data_or_mark) [gpio] = { data_or_mark }
+#define PINMUX_DATA(data_or_mark, ids...) data_or_mark, ids, 0
+
+struct pinmux_cfg_reg {
+ unsigned long reg, reg_width, field_width;
+ unsigned long *cnt;
+ pinmux_enum_t *enum_ids;
+};
+
+#define PINMUX_CFG_REG(name, r, r_width, f_width) \
+ .reg = r, .reg_width = r_width, .field_width = f_width, \
+ .cnt = (unsigned long [r_width / f_width]) {}, \
+ .enum_ids = (pinmux_enum_t [(r_width / f_width) * (1 << f_width)]) \
+
+struct pinmux_data_reg {
+ unsigned long reg, reg_width, reg_shadow;
+ pinmux_enum_t *enum_ids;
+};
+
+#define PINMUX_DATA_REG(name, r, r_width) \
+ .reg = r, .reg_width = r_width, \
+ .enum_ids = (pinmux_enum_t [r_width]) \
+
+struct pinmux_range {
+ pinmux_enum_t begin;
+ pinmux_enum_t end;
+ pinmux_enum_t force;
+};
+
+struct pinmux_info {
+ char *name;
+ pinmux_enum_t reserved_id;
+ struct pinmux_range data;
+ struct pinmux_range input;
+ struct pinmux_range input_pd;
+ struct pinmux_range input_pu;
+ struct pinmux_range output;
+ struct pinmux_range mark;
+ struct pinmux_range function;
+
+ unsigned first_gpio, last_gpio;
+
+ struct pinmux_gpio *gpios;
+ struct pinmux_cfg_reg *cfg_regs;
+ struct pinmux_data_reg *data_regs;
+
+ pinmux_enum_t *gpio_data;
+ unsigned int gpio_data_size;
+
+ unsigned long *gpio_in_use;
+ struct gpio_chip chip;
+};
+
+int register_pinmux(struct pinmux_info *pip);
+
+#endif /* __SH_PFC_H */
diff --git a/include/linux/spi/spi_bitbang.h b/include/linux/spi/spi_bitbang.h
index eed4254..3274c50 100644
--- a/include/linux/spi/spi_bitbang.h
+++ b/include/linux/spi/spi_bitbang.h
@@ -15,7 +15,7 @@
* Some hardware works well with requests at spi_transfer scope:
*
* - Drivers leveraging smarter hardware, with fifos or DMA; or for half
- * duplex (MicroWire) controllers. Provide chipslect() and txrx_bufs(),
+ * duplex (MicroWire) controllers. Provide chipselect() and txrx_bufs(),
* and custom setup()/cleanup() methods.
*/
diff --git a/include/linux/sysctl.h b/include/linux/sysctl.h
index 56af3ca..877ba03 100644
--- a/include/linux/sysctl.h
+++ b/include/linux/sysctl.h
@@ -89,8 +89,8 @@
KERN_VERSION=4, /* string: compile time info */
KERN_SECUREMASK=5, /* struct: maximum rights mask */
KERN_PROF=6, /* table: profiling information */
- KERN_NODENAME=7,
- KERN_DOMAINNAME=8,
+ KERN_NODENAME=7, /* string: hostname */
+ KERN_DOMAINNAME=8, /* string: domainname */
KERN_PANIC=15, /* int: panic timeout */
KERN_REALROOTDEV=16, /* real root device to mount after initrd */
@@ -102,8 +102,8 @@
KERN_PPC_HTABRECLAIM=25, /* turn htab reclaimation on/off on PPC */
KERN_PPC_ZEROPAGED=26, /* turn idle page zeroing on/off on PPC */
KERN_PPC_POWERSAVE_NAP=27, /* use nap mode for power saving */
- KERN_MODPROBE=28,
- KERN_SG_BIG_BUFF=29,
+ KERN_MODPROBE=28, /* string: modprobe path */
+ KERN_SG_BIG_BUFF=29, /* int: sg driver reserved buffer size */
KERN_ACCT=30, /* BSD process accounting parameters */
KERN_PPC_L2CR=31, /* l2cr register on PPC */
@@ -150,7 +150,7 @@
KERN_ACPI_VIDEO_FLAGS=71, /* int: flags for setting up video after ACPI sleep */
KERN_IA64_UNALIGNED=72, /* int: ia64 unaligned userland trap enable */
KERN_COMPAT_LOG=73, /* int: print compat layer messages */
- KERN_MAX_LOCK_DEPTH=74,
+ KERN_MAX_LOCK_DEPTH=74, /* int: rtmutex's maximum lock depth */
KERN_NMI_WATCHDOG=75, /* int: enable/disable nmi watchdog */
KERN_PANIC_ON_NMI=76, /* int: whether we will panic on an unrecovered */
};
diff --git a/include/linux/ucb1400.h b/include/linux/ucb1400.h
index adb4406..1b47909 100644
--- a/include/linux/ucb1400.h
+++ b/include/linux/ucb1400.h
@@ -110,6 +110,10 @@
struct platform_device *ucb1400_gpio;
};
+struct ucb1400_pdata {
+ int irq;
+};
+
static inline u16 ucb1400_reg_read(struct snd_ac97 *ac97, u16 reg)
{
return ac97->bus->ops->read(ac97, reg);
diff --git a/include/linux/usb/wusb.h b/include/linux/usb/wusb.h
index 429c631..63ebdcc 100644
--- a/include/linux/usb/wusb.h
+++ b/include/linux/usb/wusb.h
@@ -74,7 +74,7 @@
* WUSB defines that CHIDs, CDIDs and CKs are a 16 byte string of
* data. In order to avoid confusion and enforce types, we wrap it.
*
- * Make it packed, as we use it in some hw defintions.
+ * Make it packed, as we use it in some hw definitions.
*/
struct wusb_ckhdid {
u8 data[16];
diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h
index b59e78c..32b9229 100644
--- a/include/linux/videodev2.h
+++ b/include/linux/videodev2.h
@@ -361,6 +361,7 @@
#define V4L2_PIX_FMT_PJPG v4l2_fourcc('P', 'J', 'P', 'G') /* Pixart 73xx JPEG */
#define V4L2_PIX_FMT_OV511 v4l2_fourcc('O', '5', '1', '1') /* ov511 JPEG */
#define V4L2_PIX_FMT_OV518 v4l2_fourcc('O', '5', '1', '8') /* ov518 JPEG */
+#define V4L2_PIX_FMT_STV0680 v4l2_fourcc('S', '6', '8', '0') /* stv0680 bayer */
/*
* F O R M A T E N U M E R A T I O N
@@ -490,7 +491,7 @@
* you do, leave them untouched.
* Inluding less markers will make the
* resulting code smaller, but there will
- * be fewer aplications which can read it.
+ * be fewer applications which can read it.
* The presence of the APP and COM marker
* is influenced by APP_len and COM_len
* ONLY, not by this property! */
@@ -563,6 +564,7 @@
#define V4L2_FBUF_CAP_LOCAL_ALPHA 0x0010
#define V4L2_FBUF_CAP_GLOBAL_ALPHA 0x0020
#define V4L2_FBUF_CAP_LOCAL_INV_ALPHA 0x0040
+#define V4L2_FBUF_CAP_SRC_CHROMAKEY 0x0080
/* Flags for the 'flags' field. */
#define V4L2_FBUF_FLAG_PRIMARY 0x0001
#define V4L2_FBUF_FLAG_OVERLAY 0x0002
@@ -570,6 +572,7 @@
#define V4L2_FBUF_FLAG_LOCAL_ALPHA 0x0008
#define V4L2_FBUF_FLAG_GLOBAL_ALPHA 0x0010
#define V4L2_FBUF_FLAG_LOCAL_INV_ALPHA 0x0020
+#define V4L2_FBUF_FLAG_SRC_CHROMAKEY 0x0040
struct v4l2_clip {
struct v4l2_rect c;
@@ -912,8 +915,10 @@
#define V4L2_CID_AUTOBRIGHTNESS (V4L2_CID_BASE+32)
#define V4L2_CID_BAND_STOP_FILTER (V4L2_CID_BASE+33)
+#define V4L2_CID_ROTATE (V4L2_CID_BASE+34)
+#define V4L2_CID_BG_COLOR (V4L2_CID_BASE+35)
/* last CID + 1 */
-#define V4L2_CID_LASTP1 (V4L2_CID_BASE+34)
+#define V4L2_CID_LASTP1 (V4L2_CID_BASE+36)
/* MPEG-class control IDs defined by V4L2 */
#define V4L2_CID_MPEG_BASE (V4L2_CTRL_CLASS_MPEG | 0x900)
diff --git a/include/linux/workqueue.h b/include/linux/workqueue.h
index cf24c20..9466e86 100644
--- a/include/linux/workqueue.h
+++ b/include/linux/workqueue.h
@@ -25,6 +25,7 @@
struct work_struct {
atomic_long_t data;
#define WORK_STRUCT_PENDING 0 /* T if work item pending execution */
+#define WORK_STRUCT_STATIC 1 /* static initializer (debugobjects) */
#define WORK_STRUCT_FLAG_MASK (3UL)
#define WORK_STRUCT_WQ_DATA_MASK (~WORK_STRUCT_FLAG_MASK)
struct list_head entry;
@@ -35,6 +36,7 @@
};
#define WORK_DATA_INIT() ATOMIC_LONG_INIT(0)
+#define WORK_DATA_STATIC_INIT() ATOMIC_LONG_INIT(2)
struct delayed_work {
struct work_struct work;
@@ -63,7 +65,7 @@
#endif
#define __WORK_INITIALIZER(n, f) { \
- .data = WORK_DATA_INIT(), \
+ .data = WORK_DATA_STATIC_INIT(), \
.entry = { &(n).entry, &(n).entry }, \
.func = (f), \
__WORK_INIT_LOCKDEP_MAP(#n, &(n)) \
@@ -91,6 +93,14 @@
#define PREPARE_DELAYED_WORK(_work, _func) \
PREPARE_WORK(&(_work)->work, (_func))
+#ifdef CONFIG_DEBUG_OBJECTS_WORK
+extern void __init_work(struct work_struct *work, int onstack);
+extern void destroy_work_on_stack(struct work_struct *work);
+#else
+static inline void __init_work(struct work_struct *work, int onstack) { }
+static inline void destroy_work_on_stack(struct work_struct *work) { }
+#endif
+
/*
* initialize all of a work item in one go
*
@@ -99,24 +109,36 @@
* to generate better code.
*/
#ifdef CONFIG_LOCKDEP
-#define INIT_WORK(_work, _func) \
+#define __INIT_WORK(_work, _func, _onstack) \
do { \
static struct lock_class_key __key; \
\
+ __init_work((_work), _onstack); \
(_work)->data = (atomic_long_t) WORK_DATA_INIT(); \
lockdep_init_map(&(_work)->lockdep_map, #_work, &__key, 0);\
INIT_LIST_HEAD(&(_work)->entry); \
PREPARE_WORK((_work), (_func)); \
} while (0)
#else
-#define INIT_WORK(_work, _func) \
+#define __INIT_WORK(_work, _func, _onstack) \
do { \
+ __init_work((_work), _onstack); \
(_work)->data = (atomic_long_t) WORK_DATA_INIT(); \
INIT_LIST_HEAD(&(_work)->entry); \
PREPARE_WORK((_work), (_func)); \
} while (0)
#endif
+#define INIT_WORK(_work, _func) \
+ do { \
+ __INIT_WORK((_work), (_func), 0); \
+ } while (0)
+
+#define INIT_WORK_ON_STACK(_work, _func) \
+ do { \
+ __INIT_WORK((_work), (_func), 1); \
+ } while (0)
+
#define INIT_DELAYED_WORK(_work, _func) \
do { \
INIT_WORK(&(_work)->work, (_func)); \
@@ -125,22 +147,16 @@
#define INIT_DELAYED_WORK_ON_STACK(_work, _func) \
do { \
- INIT_WORK(&(_work)->work, (_func)); \
+ INIT_WORK_ON_STACK(&(_work)->work, (_func)); \
init_timer_on_stack(&(_work)->timer); \
} while (0)
-#define INIT_DELAYED_WORK_DEFERRABLE(_work, _func) \
+#define INIT_DELAYED_WORK_DEFERRABLE(_work, _func) \
do { \
INIT_WORK(&(_work)->work, (_func)); \
init_timer_deferrable(&(_work)->timer); \
} while (0)
-#define INIT_DELAYED_WORK_ON_STACK(_work, _func) \
- do { \
- INIT_WORK(&(_work)->work, (_func)); \
- init_timer_on_stack(&(_work)->timer); \
- } while (0)
-
/**
* work_pending - Find out whether a work item is currently pending
* @work: The work item in question
diff --git a/include/media/cx25840.h b/include/media/cx25840.h
index 2c3fbaa..0b0cb17 100644
--- a/include/media/cx25840.h
+++ b/include/media/cx25840.h
@@ -84,6 +84,7 @@
CX25840_NONE0_CH3 = 0x80000080,
CX25840_NONE1_CH3 = 0x800000c0,
CX25840_SVIDEO_ON = 0x80000100,
+ CX25840_COMPONENT_ON = 0x80000200,
};
enum cx25840_audio_input {
diff --git a/include/media/davinci/vpfe_capture.h b/include/media/davinci/vpfe_capture.h
index 71d8982..d863e5e 100644
--- a/include/media/davinci/vpfe_capture.h
+++ b/include/media/davinci/vpfe_capture.h
@@ -83,6 +83,8 @@
struct vpfe_config {
/* Number of sub devices connected to vpfe */
int num_subdevs;
+ /* i2c bus adapter no */
+ int i2c_adapter_id;
/* information about each subdev */
struct vpfe_subdev_info *sub_devs;
/* evm card info */
diff --git a/include/media/ir-common.h b/include/media/ir-common.h
index 29f0e53..e41a99e 100644
--- a/include/media/ir-common.h
+++ b/include/media/ir-common.h
@@ -26,14 +26,16 @@
#include <linux/input.h>
#include <linux/workqueue.h>
#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+
+extern int media_ir_debug; /* media_ir_debug level (0,1,2) */
+#define IR_dprintk(level, fmt, arg...) if (media_ir_debug >= level) \
+ printk(KERN_DEBUG "%s: " fmt , __func__, ## arg)
#define IR_TYPE_RC5 1
#define IR_TYPE_PD 2 /* Pulse distance encoded IR */
#define IR_TYPE_OTHER 99
-#define IR_KEYTAB_TYPE u32
-#define IR_KEYTAB_SIZE 128 /* enougth for rc5, probably need more some day */
-
struct ir_scancode {
u16 scancode;
u32 keycode;
@@ -42,11 +44,9 @@
struct ir_scancode_table {
struct ir_scancode *scan;
int size;
+ spinlock_t lock;
};
-#define IR_KEYCODE(tab,code) (((unsigned)code < IR_KEYTAB_SIZE) \
- ? tab[code] : KEY_RESERVED)
-
#define RC5_START(x) (((x)>>12)&3)
#define RC5_TOGGLE(x) (((x)>>11)&1)
#define RC5_ADDR(x) (((x)>>6)&31)
@@ -55,11 +55,11 @@
struct ir_input_state {
/* configuration */
int ir_type;
- IR_KEYTAB_TYPE ir_codes[IR_KEYTAB_SIZE];
+
+ struct ir_scancode_table keytable;
/* key info */
- u32 ir_raw; /* raw data */
- u32 ir_key; /* ir key code */
+ u32 ir_key; /* ir scancode */
u32 keycode; /* linux key code */
int keypressed; /* current state */
};
@@ -102,20 +102,36 @@
struct tasklet_struct tlet;
};
-void ir_input_init(struct input_dev *dev, struct ir_input_state *ir,
+/* Routines from ir-functions.c */
+
+int ir_input_init(struct input_dev *dev, struct ir_input_state *ir,
int ir_type, struct ir_scancode_table *ir_codes);
void ir_input_nokey(struct input_dev *dev, struct ir_input_state *ir);
void ir_input_keydown(struct input_dev *dev, struct ir_input_state *ir,
- u32 ir_key, u32 ir_raw);
+ u32 ir_key);
u32 ir_extract_bits(u32 data, u32 mask);
int ir_dump_samples(u32 *samples, int count);
int ir_decode_biphase(u32 *samples, int count, int low, int high);
int ir_decode_pulsedistance(u32 *samples, int count, int low, int high);
+u32 ir_rc5_decode(unsigned int code);
void ir_rc5_timer_end(unsigned long data);
void ir_rc5_timer_keyup(unsigned long data);
-/* Keymaps to be used by other modules */
+/* Routines from ir-keytable.c */
+
+u32 ir_g_keycode_from_table(struct input_dev *input_dev,
+ u32 scancode);
+
+int ir_set_keycode_table(struct input_dev *input_dev,
+ struct ir_scancode_table *rc_tab);
+
+int ir_roundup_tablesize(int n_elems);
+int ir_copy_table(struct ir_scancode_table *destin,
+ const struct ir_scancode_table *origin);
+void ir_input_free(struct input_dev *input_dev);
+
+/* scancode->keycode map tables from ir-keymaps.c */
extern struct ir_scancode_table ir_codes_empty_table;
extern struct ir_scancode_table ir_codes_avermedia_table;
@@ -150,6 +166,7 @@
extern struct ir_scancode_table ir_codes_winfast_table;
extern struct ir_scancode_table ir_codes_pinnacle_color_table;
extern struct ir_scancode_table ir_codes_hauppauge_new_table;
+extern struct ir_scancode_table ir_codes_rc5_hauppauge_new_table;
extern struct ir_scancode_table ir_codes_npgtech_table;
extern struct ir_scancode_table ir_codes_norwood_table;
extern struct ir_scancode_table ir_codes_proteus_2309_table;
@@ -172,6 +189,8 @@
extern struct ir_scancode_table ir_codes_kworld_plus_tv_analog_table;
extern struct ir_scancode_table ir_codes_kaiomy_table;
extern struct ir_scancode_table ir_codes_dm1105_nec_table;
+extern struct ir_scancode_table ir_codes_tevii_nec_table;
+extern struct ir_scancode_table ir_codes_tbs_nec_table;
extern struct ir_scancode_table ir_codes_evga_indtube_table;
extern struct ir_scancode_table ir_codes_terratec_cinergy_xs_table;
extern struct ir_scancode_table ir_codes_videomate_s350_table;
diff --git a/include/media/v4l2-chip-ident.h b/include/media/v4l2-chip-ident.h
index cf16689..91942db 100644
--- a/include/media/v4l2-chip-ident.h
+++ b/include/media/v4l2-chip-ident.h
@@ -64,6 +64,7 @@
V4L2_IDENT_OV9650 = 254,
V4L2_IDENT_OV9655 = 255,
V4L2_IDENT_SOI968 = 256,
+ V4L2_IDENT_OV9640 = 257,
/* module saa7146: reserved range 300-309 */
V4L2_IDENT_SAA7146 = 300,
@@ -72,6 +73,7 @@
V4L2_IDENT_CX23418_843 = 403, /* Integrated A/V Decoder on the '418 */
V4L2_IDENT_CX23415 = 415,
V4L2_IDENT_CX23416 = 416,
+ V4L2_IDENT_CX23417 = 417,
V4L2_IDENT_CX23418 = 418,
/* module au0828 */
@@ -129,6 +131,9 @@
V4L2_IDENT_SAA6752HS = 6752,
V4L2_IDENT_SAA6752HS_AC3 = 6753,
+ /* modules tef6862: just ident 6862 */
+ V4L2_IDENT_TEF6862 = 6862,
+
/* module adv7170: just ident 7170 */
V4L2_IDENT_ADV7170 = 7170,
@@ -165,12 +170,27 @@
/* module mt9v011, just ident 8243 */
V4L2_IDENT_MT9V011 = 8243,
+ /* module cx23885 and cx25840 */
+ V4L2_IDENT_CX23885 = 8850,
+ V4L2_IDENT_CX23885_AV = 8851, /* Integrated A/V decoder */
+ V4L2_IDENT_CX23887 = 8870,
+ V4L2_IDENT_CX23887_AV = 8871, /* Integrated A/V decoder */
+ V4L2_IDENT_CX23888 = 8880,
+ V4L2_IDENT_CX23888_AV = 8881, /* Integrated A/V decoder */
+ V4L2_IDENT_CX23888_IR = 8882, /* Integrated infrared controller */
+
/* module tw9910: just ident 9910 */
V4L2_IDENT_TW9910 = 9910,
/* module sn9c20x: just ident 10000 */
V4L2_IDENT_SN9C20X = 10000,
+ /* module cx231xx and cx25840 */
+ V4L2_IDENT_CX2310X_AV = 23099, /* Integrated A/V decoder; not in '100 */
+ V4L2_IDENT_CX23100 = 23100,
+ V4L2_IDENT_CX23101 = 23101,
+ V4L2_IDENT_CX23102 = 23102,
+
/* module msp3400: reserved range 34000-34999 and 44000-44999 */
V4L2_IDENT_MSPX4XX = 34000, /* generic MSPX4XX identifier, only
use internally (tveeprom.c). */
@@ -264,6 +284,9 @@
/* module m52790: just ident 52790 */
V4L2_IDENT_M52790 = 52790,
+
+ /* Sharp RJ54N1CB0C, 0xCB0C = 51980 */
+ V4L2_IDENT_RJ54N1CB0C = 51980,
};
#endif
diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h
index d411345..00bf176 100644
--- a/include/media/v4l2-subdev.h
+++ b/include/media/v4l2-subdev.h
@@ -23,6 +23,16 @@
#include <media/v4l2-common.h>
+/* generic v4l2_device notify callback notification values */
+#define V4L2_SUBDEV_IR_RX_NOTIFY _IOW('v', 0, u32)
+#define V4L2_SUBDEV_IR_RX_FIFO_SERVICE_REQ 0x00000001
+#define V4L2_SUBDEV_IR_RX_END_OF_RX_DETECTED 0x00000002
+#define V4L2_SUBDEV_IR_RX_HW_FIFO_OVERRUN 0x00000004
+#define V4L2_SUBDEV_IR_RX_SW_FIFO_OVERRUN 0x00000008
+
+#define V4L2_SUBDEV_IR_TX_NOTIFY _IOW('v', 1, u32)
+#define V4L2_SUBDEV_IR_TX_FIFO_SERVICE_REQ 0x00000001
+
struct v4l2_device;
struct v4l2_subdev;
struct tuner_setup;
@@ -96,6 +106,9 @@
s_gpio: set GPIO pins. Very simple right now, might need to be extended with
a direction argument if needed.
+
+ s_power: puts subdevice in power saving mode (on == 0) or normal operation
+ mode (on == 1).
*/
struct v4l2_subdev_core_ops {
int (*g_chip_ident)(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip);
@@ -118,6 +131,7 @@
int (*g_register)(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg);
int (*s_register)(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg);
#endif
+ int (*s_power)(struct v4l2_subdev *sd, int on);
};
/* s_mode: switch the tuner to a specific tuner mode. Replacement of s_radio.
@@ -127,8 +141,6 @@
s_type_addr: sets tuner type and its I2C addr.
s_config: sets tda9887 specific stuff, like port1, port2 and qss
-
- s_standby: puts tuner on powersaving state, disabling it, except for i2c.
*/
struct v4l2_subdev_tuner_ops {
int (*s_mode)(struct v4l2_subdev *sd, enum v4l2_tuner_type);
@@ -141,7 +153,6 @@
int (*s_modulator)(struct v4l2_subdev *sd, struct v4l2_modulator *vm);
int (*s_type_addr)(struct v4l2_subdev *sd, struct tuner_setup *type);
int (*s_config)(struct v4l2_subdev *sd, const struct v4l2_priv_tun_config *config);
- int (*s_standby)(struct v4l2_subdev *sd);
};
/* s_clock_freq: set the frequency (in Hz) of the audio clock output.
@@ -231,11 +242,95 @@
int (*enum_frameintervals)(struct v4l2_subdev *sd, struct v4l2_frmivalenum *fival);
};
+/*
+ interrupt_service_routine: Called by the bridge chip's interrupt service
+ handler, when an IR interrupt status has be raised due to this subdev,
+ so that this subdev can handle the details. It may schedule work to be
+ performed later. It must not sleep. *Called from an IRQ context*.
+
+ [rt]x_g_parameters: Get the current operating parameters and state of the
+ the IR receiver or transmitter.
+
+ [rt]x_s_parameters: Set the current operating parameters and state of the
+ the IR receiver or transmitter. It is recommended to call
+ [rt]x_g_parameters first to fill out the current state, and only change
+ the fields that need to be changed. Upon return, the actual device
+ operating parameters and state will be returned. Note that hardware
+ limitations may prevent the actual settings from matching the requested
+ settings - e.g. an actual carrier setting of 35,904 Hz when 36,000 Hz
+ was requested. An exception is when the shutdown parameter is true.
+ The last used operational parameters will be returned, but the actual
+ state of the hardware be different to minimize power consumption and
+ processing when shutdown is true.
+
+ rx_read: Reads received codes or pulse width data.
+ The semantics are similar to a non-blocking read() call.
+
+ tx_write: Writes codes or pulse width data for transmission.
+ The semantics are similar to a non-blocking write() call.
+ */
+
+enum v4l2_subdev_ir_mode {
+ V4L2_SUBDEV_IR_MODE_PULSE_WIDTH, /* space & mark widths in nanosecs */
+};
+
+/* Data format of data read or written for V4L2_SUBDEV_IR_MODE_PULSE_WIDTH */
+#define V4L2_SUBDEV_IR_PULSE_MAX_WIDTH_NS 0x7fffffff
+#define V4L2_SUBDEV_IR_PULSE_LEVEL_MASK 0x80000000
+#define V4L2_SUBDEV_IR_PULSE_RX_SEQ_END 0xffffffff
+
+struct v4l2_subdev_ir_parameters {
+ /* Either Rx or Tx */
+ unsigned int bytes_per_data_element; /* of data in read or write call */
+ enum v4l2_subdev_ir_mode mode;
+
+ bool enable;
+ bool interrupt_enable;
+ bool shutdown; /* true: set hardware to low/no power, false: normal */
+
+ bool modulation; /* true: uses carrier, false: baseband */
+ u32 max_pulse_width; /* ns, valid only for baseband signal */
+ unsigned int carrier_freq; /* Hz, valid only for modulated signal*/
+ unsigned int duty_cycle; /* percent, valid only for modulated signal*/
+ bool invert; /* logically invert sense of mark/space */
+
+ /* Rx only */
+ u32 noise_filter_min_width; /* ns, min time of a valid pulse */
+ unsigned int carrier_range_lower; /* Hz, valid only for modulated sig */
+ unsigned int carrier_range_upper; /* Hz, valid only for modulated sig */
+ u32 resolution; /* ns */
+};
+
+struct v4l2_subdev_ir_ops {
+ /* Common to receiver and transmitter */
+ int (*interrupt_service_routine)(struct v4l2_subdev *sd,
+ u32 status, bool *handled);
+
+ /* Receiver */
+ int (*rx_read)(struct v4l2_subdev *sd, u8 *buf, size_t count,
+ ssize_t *num);
+
+ int (*rx_g_parameters)(struct v4l2_subdev *sd,
+ struct v4l2_subdev_ir_parameters *params);
+ int (*rx_s_parameters)(struct v4l2_subdev *sd,
+ struct v4l2_subdev_ir_parameters *params);
+
+ /* Transmitter */
+ int (*tx_write)(struct v4l2_subdev *sd, u8 *buf, size_t count,
+ ssize_t *num);
+
+ int (*tx_g_parameters)(struct v4l2_subdev *sd,
+ struct v4l2_subdev_ir_parameters *params);
+ int (*tx_s_parameters)(struct v4l2_subdev *sd,
+ struct v4l2_subdev_ir_parameters *params);
+};
+
struct v4l2_subdev_ops {
const struct v4l2_subdev_core_ops *core;
const struct v4l2_subdev_tuner_ops *tuner;
const struct v4l2_subdev_audio_ops *audio;
const struct v4l2_subdev_video_ops *video;
+ const struct v4l2_subdev_ir_ops *ir;
};
#define V4L2_SUBDEV_NAME_SIZE 32
@@ -290,7 +385,7 @@
Example: err = v4l2_subdev_call(sd, core, g_chip_ident, &chip);
*/
#define v4l2_subdev_call(sd, o, f, args...) \
- (!(sd) ? -ENODEV : (((sd) && (sd)->ops->o && (sd)->ops->o->f) ? \
+ (!(sd) ? -ENODEV : (((sd)->ops->o && (sd)->ops->o->f) ? \
(sd)->ops->o->f((sd) , ##args) : -ENOIOCTLCMD))
/* Send a notification to v4l2_device. */
diff --git a/include/media/videobuf-core.h b/include/media/videobuf-core.h
index 1c5946c..316fdcc 100644
--- a/include/media/videobuf-core.h
+++ b/include/media/videobuf-core.h
@@ -166,7 +166,7 @@
enum v4l2_field field;
enum v4l2_field last; /* for field=V4L2_FIELD_ALTERNATE */
struct videobuf_buffer *bufs[VIDEO_MAX_FRAME];
- struct videobuf_queue_ops *ops;
+ const struct videobuf_queue_ops *ops;
struct videobuf_qtype_ops *int_ops;
unsigned int streaming:1;
@@ -195,7 +195,7 @@
struct videobuf_buffer *buf);
void videobuf_queue_core_init(struct videobuf_queue *q,
- struct videobuf_queue_ops *ops,
+ const struct videobuf_queue_ops *ops,
struct device *dev,
spinlock_t *irqlock,
enum v4l2_buf_type type,
diff --git a/include/media/videobuf-dma-contig.h b/include/media/videobuf-dma-contig.h
index 5493866..ebaa9bc 100644
--- a/include/media/videobuf-dma-contig.h
+++ b/include/media/videobuf-dma-contig.h
@@ -17,7 +17,7 @@
#include <media/videobuf-core.h>
void videobuf_queue_dma_contig_init(struct videobuf_queue *q,
- struct videobuf_queue_ops *ops,
+ const struct videobuf_queue_ops *ops,
struct device *dev,
spinlock_t *irqlock,
enum v4l2_buf_type type,
diff --git a/include/media/videobuf-dma-sg.h b/include/media/videobuf-dma-sg.h
index dda47f0..53e72f7 100644
--- a/include/media/videobuf-dma-sg.h
+++ b/include/media/videobuf-dma-sg.h
@@ -103,7 +103,7 @@
void *videobuf_sg_alloc(size_t size);
void videobuf_queue_sg_init(struct videobuf_queue* q,
- struct videobuf_queue_ops *ops,
+ const struct videobuf_queue_ops *ops,
struct device *dev,
spinlock_t *irqlock,
enum v4l2_buf_type type,
diff --git a/include/media/videobuf-dvb.h b/include/media/videobuf-dvb.h
index 6ba4f12..07cf4b9 100644
--- a/include/media/videobuf-dvb.h
+++ b/include/media/videobuf-dvb.h
@@ -42,7 +42,9 @@
void *adapter_priv,
struct device *device,
short *adapter_nr,
- int mfe_shared);
+ int mfe_shared,
+ int (*fe_ioctl_override)(struct dvb_frontend *,
+ unsigned int, void *, unsigned int));
void videobuf_dvb_unregister_bus(struct videobuf_dvb_frontends *f);
diff --git a/include/media/videobuf-vmalloc.h b/include/media/videobuf-vmalloc.h
index e87222c..4b419a257 100644
--- a/include/media/videobuf-vmalloc.h
+++ b/include/media/videobuf-vmalloc.h
@@ -30,8 +30,8 @@
};
void videobuf_queue_vmalloc_init(struct videobuf_queue* q,
- struct videobuf_queue_ops *ops,
- void *dev,
+ const struct videobuf_queue_ops *ops,
+ struct device *dev,
spinlock_t *irqlock,
enum v4l2_buf_type type,
enum v4l2_field field,
diff --git a/include/net/sctp/structs.h b/include/net/sctp/structs.h
index 7571e32..ff30177 100644
--- a/include/net/sctp/structs.h
+++ b/include/net/sctp/structs.h
@@ -989,7 +989,7 @@
int init_sent_count;
/* state : The current state of this destination,
- * : i.e. SCTP_ACTIVE, SCTP_INACTIVE, SCTP_UNKOWN.
+ * : i.e. SCTP_ACTIVE, SCTP_INACTIVE, SCTP_UNKNOWN.
*/
int state;
diff --git a/include/net/tcp.h b/include/net/tcp.h
index e2d2ca2..5740b85 100644
--- a/include/net/tcp.h
+++ b/include/net/tcp.h
@@ -1262,7 +1262,7 @@
skb_queue_walk_from_safe(&(sk)->sk_write_queue, skb, tmp)
/* This function calculates a "timeout" which is equivalent to the timeout of a
- * TCP connection after "boundary" unsucessful, exponentially backed-off
+ * TCP connection after "boundary" unsuccessful, exponentially backed-off
* retransmissions with an initial RTO of TCP_RTO_MIN.
*/
static inline bool retransmits_timed_out(const struct sock *sk,
diff --git a/include/net/wimax.h b/include/net/wimax.h
index d69c4a7..3461aa1 100644
--- a/include/net/wimax.h
+++ b/include/net/wimax.h
@@ -79,7 +79,7 @@
* drivers have to only report state changes due to external
* conditions.
*
- * All API operations are 'atomic', serialized thorough a mutex in the
+ * All API operations are 'atomic', serialized through a mutex in the
* `struct wimax_dev`.
*
* EXPORTING TO USER SPACE THROUGH GENERIC NETLINK
diff --git a/include/scsi/Kbuild b/include/scsi/Kbuild
index 33b2750..b3a0ee6 100644
--- a/include/scsi/Kbuild
+++ b/include/scsi/Kbuild
@@ -2,3 +2,4 @@
header-y += scsi_netlink.h
header-y += scsi_netlink_fc.h
header-y += scsi_bsg_fc.h
+header-y += fc/
diff --git a/include/scsi/fc/Kbuild b/include/scsi/fc/Kbuild
new file mode 100644
index 0000000..5660381
--- /dev/null
+++ b/include/scsi/fc/Kbuild
@@ -0,0 +1,4 @@
+header-y += fc_els.h
+header-y += fc_fs.h
+header-y += fc_gs.h
+header-y += fc_ns.h
diff --git a/include/scsi/fc/fc_els.h b/include/scsi/fc/fc_els.h
index 195ca01..f943281 100644
--- a/include/scsi/fc/fc_els.h
+++ b/include/scsi/fc/fc_els.h
@@ -20,6 +20,8 @@
#ifndef _FC_ELS_H_
#define _FC_ELS_H_
+#include <linux/types.h>
+
/*
* Fibre Channel Switch - Enhanced Link Services definitions.
* From T11 FC-LS Rev 1.2 June 7, 2005.
@@ -248,10 +250,12 @@
/*
* sp_features
*/
-#define FC_SP_FT_CIRO 0x8000 /* continuously increasing rel. off. */
+#define FC_SP_FT_NPIV 0x8000 /* multiple N_Port_ID support (FLOGI) */
+#define FC_SP_FT_CIRO 0x8000 /* continuously increasing rel off (PLOGI) */
#define FC_SP_FT_CLAD 0x8000 /* clean address (in FLOGI LS_ACC) */
#define FC_SP_FT_RAND 0x4000 /* random relative offset */
#define FC_SP_FT_VAL 0x2000 /* valid vendor version level */
+#define FC_SP_FT_NPIV_ACC 0x2000 /* NPIV assignment (FLOGI LS_ACC) */
#define FC_SP_FT_FPORT 0x1000 /* F port (1) vs. N port (0) */
#define FC_SP_FT_ABB 0x0800 /* alternate BB_credit management */
#define FC_SP_FT_EDTR 0x0400 /* E_D_TOV Resolution is nanoseconds */
diff --git a/include/scsi/fc/fc_fcoe.h b/include/scsi/fc/fc_fcoe.h
index ccb3dbe..e6ad3d2 100644
--- a/include/scsi/fc/fc_fcoe.h
+++ b/include/scsi/fc/fc_fcoe.h
@@ -86,6 +86,18 @@
#define FCOE_MIN_FRAME 46
/*
+ * FCoE Link Error Status Block: T11 FC-BB-5 Rev2.0, Clause 7.10.
+ */
+struct fcoe_fc_els_lesb {
+ __be32 lesb_link_fail; /* link failure count */
+ __be32 lesb_vlink_fail; /* virtual link failure count */
+ __be32 lesb_miss_fka; /* missing FIP keep-alive count */
+ __be32 lesb_symb_err; /* symbol error during carrier count */
+ __be32 lesb_err_block; /* errored block count */
+ __be32 lesb_fcs_error; /* frame check sequence error count */
+};
+
+/*
* fc_fcoe_set_mac - Store OUI + DID into MAC address field.
* @mac: mac address to be set
* @did: fc dest id to use
diff --git a/include/scsi/fc/fc_fcp.h b/include/scsi/fc/fc_fcp.h
index 5d38f19..747e2c7 100644
--- a/include/scsi/fc/fc_fcp.h
+++ b/include/scsi/fc/fc_fcp.h
@@ -83,6 +83,8 @@
* fc_tm_flags - task management flags field.
*/
#define FCP_TMF_CLR_ACA 0x40 /* clear ACA condition */
+#define FCP_TMF_TGT_RESET 0x20 /* target reset task management,
+ deprecated as of FCP-3 */
#define FCP_TMF_LUN_RESET 0x10 /* logical unit reset task management */
#define FCP_TMF_CLR_TASK_SET 0x04 /* clear task set */
#define FCP_TMF_ABT_TASK_SET 0x02 /* abort task set */
@@ -196,4 +198,10 @@
__u8 srr_resvd2[3]; /* reserved */
};
+/*
+ * Feature bits in name server FC-4 Features object.
+ */
+#define FCP_FEAT_TARG (1 << 0) /* target function supported */
+#define FCP_FEAT_INIT (1 << 1) /* initiator function supported */
+
#endif /* _FC_FCP_H_ */
diff --git a/include/scsi/fc/fc_fip.h b/include/scsi/fc/fc_fip.h
index 3d138c1..17baa19 100644
--- a/include/scsi/fc/fc_fip.h
+++ b/include/scsi/fc/fc_fip.h
@@ -214,11 +214,21 @@
*/
struct fip_fka_desc {
struct fip_desc fd_desc;
- __u8 fd_resvd[2];
+ __u8 fd_resvd;
+ __u8 fd_flags; /* bit0 is fka disable flag */
__be32 fd_fka_period; /* adv./keep-alive period in mS */
} __attribute__((packed));
/*
+ * flags for fip_fka_desc.fd_flags
+ */
+enum fip_fka_flags {
+ FIP_FKA_ADV_D = 0x01, /* no need for FKA from ENode */
+};
+
+/* FIP_DT_FKA flags */
+
+/*
* FIP_DT_VENDOR descriptor.
*/
struct fip_vendor_desc {
diff --git a/include/scsi/fc/fc_fs.h b/include/scsi/fc/fc_fs.h
index ac4cd38..50f28b1 100644
--- a/include/scsi/fc/fc_fs.h
+++ b/include/scsi/fc/fc_fs.h
@@ -20,6 +20,8 @@
#ifndef _FC_FS_H_
#define _FC_FS_H_
+#include <linux/types.h>
+
/*
* Fibre Channel Framing and Signalling definitions.
* From T11 FC-FS-2 Rev 0.90 - 9 August 2005.
diff --git a/include/scsi/fc/fc_gs.h b/include/scsi/fc/fc_gs.h
index 324dd0e..a37346d 100644
--- a/include/scsi/fc/fc_gs.h
+++ b/include/scsi/fc/fc_gs.h
@@ -20,6 +20,8 @@
#ifndef _FC_GS_H_
#define _FC_GS_H_
+#include <linux/types.h>
+
/*
* Fibre Channel Services - Common Transport.
* From T11.org FC-GS-2 Rev 5.3 November 1998.
diff --git a/include/scsi/fc/fc_ns.h b/include/scsi/fc/fc_ns.h
index 790d7b9..e7d3ac4 100644
--- a/include/scsi/fc/fc_ns.h
+++ b/include/scsi/fc/fc_ns.h
@@ -20,6 +20,8 @@
#ifndef _FC_NS_H_
#define _FC_NS_H_
+#include <linux/types.h>
+
/*
* Fibre Channel Services - Name Service (dNS)
* From T11.org FC-GS-2 Rev 5.3 November 1998.
@@ -44,9 +46,12 @@
FC_NS_GID_FT = 0x0171, /* get IDs by FC4 type */
FC_NS_GPN_FT = 0x0172, /* get port names by FC4 type */
FC_NS_GID_PT = 0x01a1, /* get IDs by port type */
- FC_NS_RFT_ID = 0x0217, /* reg FC4 type for ID */
FC_NS_RPN_ID = 0x0212, /* reg port name for ID */
FC_NS_RNN_ID = 0x0213, /* reg node name for ID */
+ FC_NS_RFT_ID = 0x0217, /* reg FC4 type for ID */
+ FC_NS_RSPN_ID = 0x0218, /* reg symbolic port name */
+ FC_NS_RFF_ID = 0x021f, /* reg FC4 Features for ID */
+ FC_NS_RSNN_NN = 0x0239, /* reg symbolic node name */
};
/*
@@ -156,4 +161,32 @@
__be64 fr_wwn; /* node name or port name */
} __attribute__((__packed__));
+/*
+ * RSNN_NN request - register symbolic node name
+ */
+struct fc_ns_rsnn {
+ __be64 fr_wwn; /* node name */
+ __u8 fr_name_len;
+ char fr_name[];
+} __attribute__((__packed__));
+
+/*
+ * RSPN_ID request - register symbolic port name
+ */
+struct fc_ns_rspn {
+ struct fc_ns_fid fr_fid; /* port ID object */
+ __u8 fr_name_len;
+ char fr_name[];
+} __attribute__((__packed__));
+
+/*
+ * RFF_ID request - register FC-4 Features for ID.
+ */
+struct fc_ns_rff_id {
+ struct fc_ns_fid fr_fid; /* port ID object */
+ __u8 fr_resvd[2];
+ __u8 fr_feat; /* FC-4 Feature bits */
+ __u8 fr_type; /* FC-4 type */
+} __attribute__((__packed__));
+
#endif /* _FC_NS_H_ */
diff --git a/include/scsi/fc_encode.h b/include/scsi/fc_encode.h
index 27dad70..8eb0a0f 100644
--- a/include/scsi/fc_encode.h
+++ b/include/scsi/fc_encode.h
@@ -32,7 +32,10 @@
struct fc_ns_gid_ft gid;
struct fc_ns_rn_id rn;
struct fc_ns_rft rft;
+ struct fc_ns_rff_id rff;
struct fc_ns_fid fid;
+ struct fc_ns_rsnn snn;
+ struct fc_ns_rspn spn;
} payload;
};
@@ -109,6 +112,7 @@
enum fc_fh_type *fh_type)
{
struct fc_ct_req *ct;
+ size_t len;
switch (op) {
case FC_NS_GPN_FT:
@@ -128,12 +132,41 @@
ct->payload.rft.fts = lport->fcts;
break;
- case FC_NS_RPN_ID:
+ case FC_NS_RFF_ID:
+ ct = fc_ct_hdr_fill(fp, op, sizeof(struct fc_ns_rff_id));
+ hton24(ct->payload.rff.fr_fid.fp_fid,
+ fc_host_port_id(lport->host));
+ ct->payload.rff.fr_type = FC_TYPE_FCP;
+ if (lport->service_params & FCP_SPPF_INIT_FCN)
+ ct->payload.rff.fr_feat = FCP_FEAT_INIT;
+ if (lport->service_params & FCP_SPPF_TARG_FCN)
+ ct->payload.rff.fr_feat |= FCP_FEAT_TARG;
+ break;
+
+ case FC_NS_RNN_ID:
ct = fc_ct_hdr_fill(fp, op, sizeof(struct fc_ns_rn_id));
hton24(ct->payload.rn.fr_fid.fp_fid,
fc_host_port_id(lport->host));
- ct->payload.rft.fts = lport->fcts;
- put_unaligned_be64(lport->wwpn, &ct->payload.rn.fr_wwn);
+ put_unaligned_be64(lport->wwnn, &ct->payload.rn.fr_wwn);
+ break;
+
+ case FC_NS_RSPN_ID:
+ len = strnlen(fc_host_symbolic_name(lport->host), 255);
+ ct = fc_ct_hdr_fill(fp, op, sizeof(struct fc_ns_rspn) + len);
+ hton24(ct->payload.spn.fr_fid.fp_fid,
+ fc_host_port_id(lport->host));
+ strncpy(ct->payload.spn.fr_name,
+ fc_host_symbolic_name(lport->host), len);
+ ct->payload.spn.fr_name_len = len;
+ break;
+
+ case FC_NS_RSNN_NN:
+ len = strnlen(fc_host_symbolic_name(lport->host), 255);
+ ct = fc_ct_hdr_fill(fp, op, sizeof(struct fc_ns_rsnn) + len);
+ put_unaligned_be64(lport->wwnn, &ct->payload.snn.fr_wwn);
+ strncpy(ct->payload.snn.fr_name,
+ fc_host_symbolic_name(lport->host), len);
+ ct->payload.snn.fr_name_len = len;
break;
default:
@@ -198,6 +231,31 @@
sp->sp_bb_data = htons((u16) lport->mfs);
cp = &flogi->fl_cssp[3 - 1]; /* class 3 parameters */
cp->cp_class = htons(FC_CPC_VALID | FC_CPC_SEQ);
+ if (lport->does_npiv)
+ sp->sp_features = htons(FC_SP_FT_NPIV);
+}
+
+/**
+ * fc_fdisc_fill - Fill in a fdisc request frame.
+ */
+static inline void fc_fdisc_fill(struct fc_lport *lport, struct fc_frame *fp)
+{
+ struct fc_els_csp *sp;
+ struct fc_els_cssp *cp;
+ struct fc_els_flogi *fdisc;
+
+ fdisc = fc_frame_payload_get(fp, sizeof(*fdisc));
+ memset(fdisc, 0, sizeof(*fdisc));
+ fdisc->fl_cmd = (u8) ELS_FDISC;
+ put_unaligned_be64(lport->wwpn, &fdisc->fl_wwpn);
+ put_unaligned_be64(lport->wwnn, &fdisc->fl_wwnn);
+ sp = &fdisc->fl_csp;
+ sp->sp_hi_ver = 0x20;
+ sp->sp_lo_ver = 0x20;
+ sp->sp_bb_cred = htons(10); /* this gets set by gateway */
+ sp->sp_bb_data = htons((u16) lport->mfs);
+ cp = &fdisc->fl_cssp[3 - 1]; /* class 3 parameters */
+ cp->cp_class = htons(FC_CPC_VALID | FC_CPC_SEQ);
}
/**
@@ -296,6 +354,10 @@
fc_flogi_fill(lport, fp);
break;
+ case ELS_FDISC:
+ fc_fdisc_fill(lport, fp);
+ break;
+
case ELS_LOGO:
fc_logo_fill(lport, fp);
break;
diff --git a/include/scsi/fc_frame.h b/include/scsi/fc_frame.h
index c35d238..4d3e9c7 100644
--- a/include/scsi/fc_frame.h
+++ b/include/scsi/fc_frame.h
@@ -28,6 +28,8 @@
#include <scsi/fc/fc_fcp.h>
#include <scsi/fc/fc_encaps.h>
+#include <linux/if_ether.h>
+
/*
* The fc_frame interface is used to pass frame data between functions.
* The frame includes the data buffer, length, and SOF / EOF delimiter types.
@@ -37,6 +39,9 @@
#define FC_FRAME_HEADROOM 32 /* headroom for VLAN + FCoE headers */
#define FC_FRAME_TAILROOM 8 /* trailer space for FCoE */
+/* Max number of skb frags allowed, reserving one for fcoe_crc_eof page */
+#define FC_FRAME_SG_LEN (MAX_SKB_FRAGS - 1)
+
#define fp_skb(fp) (&((fp)->skb))
#define fr_hdr(fp) ((fp)->skb.data)
#define fr_len(fp) ((fp)->skb.len)
@@ -64,6 +69,7 @@
enum fc_sof fr_sof; /* start of frame delimiter */
enum fc_eof fr_eof; /* end of frame delimiter */
u8 fr_flags; /* flags - see below */
+ u8 granted_mac[ETH_ALEN]; /* FCoE MAC address */
};
@@ -94,17 +100,7 @@
}
struct fc_frame *fc_frame_alloc_fill(struct fc_lport *, size_t payload_len);
-
-struct fc_frame *__fc_frame_alloc(size_t payload_len);
-
-/*
- * Get frame for sending via port.
- */
-static inline struct fc_frame *_fc_frame_alloc(struct fc_lport *dev,
- size_t payload_len)
-{
- return __fc_frame_alloc(payload_len);
-}
+struct fc_frame *_fc_frame_alloc(size_t payload_len);
/*
* Allocate fc_frame structure and buffer. Set the initial length to
@@ -118,10 +114,10 @@
* Note: Since len will often be a constant multiple of 4,
* this check will usually be evaluated and eliminated at compile time.
*/
- if ((len % 4) != 0)
+ if (len && len % 4)
fp = fc_frame_alloc_fill(dev, len);
else
- fp = _fc_frame_alloc(dev, len);
+ fp = _fc_frame_alloc(len);
return fp;
}
diff --git a/include/scsi/iscsi_if.h b/include/scsi/iscsi_if.h
index d67dda2..66d377b 100644
--- a/include/scsi/iscsi_if.h
+++ b/include/scsi/iscsi_if.h
@@ -311,6 +311,8 @@
ISCSI_PARAM_IFACE_NAME,
ISCSI_PARAM_ISID,
ISCSI_PARAM_INITIATOR_NAME,
+
+ ISCSI_PARAM_TGT_RESET_TMO,
/* must always be last */
ISCSI_PARAM_MAX,
};
@@ -350,6 +352,7 @@
#define ISCSI_IFACE_NAME (1ULL << ISCSI_PARAM_IFACE_NAME)
#define ISCSI_ISID (1ULL << ISCSI_PARAM_ISID)
#define ISCSI_INITIATOR_NAME (1ULL << ISCSI_PARAM_INITIATOR_NAME)
+#define ISCSI_TGT_RESET_TMO (1ULL << ISCSI_PARAM_TGT_RESET_TMO)
/* iSCSI HBA params */
enum iscsi_host_param {
diff --git a/include/scsi/iscsi_proto.h b/include/scsi/iscsi_proto.h
index f2a2c11..dd0a52c 100644
--- a/include/scsi/iscsi_proto.h
+++ b/include/scsi/iscsi_proto.h
@@ -279,6 +279,8 @@
#define ISCSI_TM_FUNC_TARGET_COLD_RESET 7
#define ISCSI_TM_FUNC_TASK_REASSIGN 8
+#define ISCSI_TM_FUNC_VALUE(hdr) ((hdr)->flags & ISCSI_FLAG_TM_FUNC_MASK)
+
/* SCSI Task Management Response Header */
struct iscsi_tm_rsp {
uint8_t opcode;
diff --git a/include/scsi/libfc.h b/include/scsi/libfc.h
index 65dc9aa..4b912ee 100644
--- a/include/scsi/libfc.h
+++ b/include/scsi/libfc.h
@@ -26,6 +26,7 @@
#include <scsi/scsi_transport.h>
#include <scsi/scsi_transport_fc.h>
+#include <scsi/scsi_bsg_fc.h>
#include <scsi/fc/fc_fcp.h>
#include <scsi/fc/fc_ns.h>
@@ -34,67 +35,6 @@
#include <scsi/fc_frame.h>
-#define FC_LIBFC_LOGGING 0x01 /* General logging, not categorized */
-#define FC_LPORT_LOGGING 0x02 /* lport layer logging */
-#define FC_DISC_LOGGING 0x04 /* discovery layer logging */
-#define FC_RPORT_LOGGING 0x08 /* rport layer logging */
-#define FC_FCP_LOGGING 0x10 /* I/O path logging */
-#define FC_EM_LOGGING 0x20 /* Exchange Manager logging */
-#define FC_EXCH_LOGGING 0x40 /* Exchange/Sequence logging */
-#define FC_SCSI_LOGGING 0x80 /* SCSI logging (mostly error handling) */
-
-extern unsigned int fc_debug_logging;
-
-#define FC_CHECK_LOGGING(LEVEL, CMD) \
-do { \
- if (unlikely(fc_debug_logging & LEVEL)) \
- do { \
- CMD; \
- } while (0); \
-} while (0)
-
-#define FC_LIBFC_DBG(fmt, args...) \
- FC_CHECK_LOGGING(FC_LIBFC_LOGGING, \
- printk(KERN_INFO "libfc: " fmt, ##args))
-
-#define FC_LPORT_DBG(lport, fmt, args...) \
- FC_CHECK_LOGGING(FC_LPORT_LOGGING, \
- printk(KERN_INFO "host%u: lport %6x: " fmt, \
- (lport)->host->host_no, \
- fc_host_port_id((lport)->host), ##args))
-
-#define FC_DISC_DBG(disc, fmt, args...) \
- FC_CHECK_LOGGING(FC_DISC_LOGGING, \
- printk(KERN_INFO "host%u: disc: " fmt, \
- (disc)->lport->host->host_no, \
- ##args))
-
-#define FC_RPORT_ID_DBG(lport, port_id, fmt, args...) \
- FC_CHECK_LOGGING(FC_RPORT_LOGGING, \
- printk(KERN_INFO "host%u: rport %6x: " fmt, \
- (lport)->host->host_no, \
- (port_id), ##args))
-
-#define FC_RPORT_DBG(rdata, fmt, args...) \
- FC_RPORT_ID_DBG((rdata)->local_port, (rdata)->ids.port_id, fmt, ##args)
-
-#define FC_FCP_DBG(pkt, fmt, args...) \
- FC_CHECK_LOGGING(FC_FCP_LOGGING, \
- printk(KERN_INFO "host%u: fcp: %6x: " fmt, \
- (pkt)->lp->host->host_no, \
- pkt->rport->port_id, ##args))
-
-#define FC_EXCH_DBG(exch, fmt, args...) \
- FC_CHECK_LOGGING(FC_EXCH_LOGGING, \
- printk(KERN_INFO "host%u: xid %4x: " fmt, \
- (exch)->lp->host->host_no, \
- exch->xid, ##args))
-
-#define FC_SCSI_DBG(lport, fmt, args...) \
- FC_CHECK_LOGGING(FC_SCSI_LOGGING, \
- printk(KERN_INFO "host%u: scsi: " fmt, \
- (lport)->host->host_no, ##args))
-
/*
* libfc error codes
*/
@@ -115,15 +55,28 @@
p[2] = ((v) & 0xFF); \
} while (0)
-/*
- * FC HBA status
+/**
+ * enum fc_lport_state - Local port states
+ * @LPORT_ST_DISABLED: Disabled
+ * @LPORT_ST_FLOGI: Fabric login (FLOGI) sent
+ * @LPORT_ST_DNS: Waiting for name server remote port to become ready
+ * @LPORT_ST_RPN_ID: Register port name by ID (RPN_ID) sent
+ * @LPORT_ST_RFT_ID: Register Fibre Channel types by ID (RFT_ID) sent
+ * @LPORT_ST_RFF_ID: Register FC-4 Features by ID (RFF_ID) sent
+ * @LPORT_ST_SCR: State Change Register (SCR) sent
+ * @LPORT_ST_READY: Ready for use
+ * @LPORT_ST_LOGO: Local port logout (LOGO) sent
+ * @LPORT_ST_RESET: Local port reset
*/
enum fc_lport_state {
LPORT_ST_DISABLED = 0,
LPORT_ST_FLOGI,
LPORT_ST_DNS,
- LPORT_ST_RPN_ID,
+ LPORT_ST_RNN_ID,
+ LPORT_ST_RSNN_NN,
+ LPORT_ST_RSPN_ID,
LPORT_ST_RFT_ID,
+ LPORT_ST_RFF_ID,
LPORT_ST_SCR,
LPORT_ST_READY,
LPORT_ST_LOGO,
@@ -136,15 +89,28 @@
DISC_EV_FAILED
};
+/**
+ * enum fc_rport_state - Remote port states
+ * @RPORT_ST_INIT: Initialized
+ * @RPORT_ST_PLOGI: Waiting for PLOGI completion
+ * @RPORT_ST_PRLI: Waiting for PRLI completion
+ * @RPORT_ST_RTV: Waiting for RTV completion
+ * @RPORT_ST_READY: Ready for use
+ * @RPORT_ST_LOGO: Remote port logout (LOGO) sent
+ * @RPORT_ST_ADISC: Discover Address sent
+ * @RPORT_ST_DELETE: Remote port being deleted
+ * @RPORT_ST_RESTART: Remote port being deleted and will restart
+*/
enum fc_rport_state {
- RPORT_ST_INIT, /* initialized */
- RPORT_ST_PLOGI, /* waiting for PLOGI completion */
- RPORT_ST_PRLI, /* waiting for PRLI completion */
- RPORT_ST_RTV, /* waiting for RTV completion */
- RPORT_ST_READY, /* ready for use */
- RPORT_ST_LOGO, /* port logout sent */
- RPORT_ST_ADISC, /* Discover Address sent */
- RPORT_ST_DELETE, /* port being deleted */
+ RPORT_ST_INIT,
+ RPORT_ST_PLOGI,
+ RPORT_ST_PRLI,
+ RPORT_ST_RTV,
+ RPORT_ST_READY,
+ RPORT_ST_LOGO,
+ RPORT_ST_ADISC,
+ RPORT_ST_DELETE,
+ RPORT_ST_RESTART,
};
/**
@@ -155,12 +121,20 @@
* @port_id: Port ID of the discovered port
*/
struct fc_disc_port {
- struct fc_lport *lp;
- struct list_head peers;
- struct work_struct rport_work;
- u32 port_id;
+ struct fc_lport *lp;
+ struct list_head peers;
+ struct work_struct rport_work;
+ u32 port_id;
};
+/**
+ * enum fc_rport_event - Remote port events
+ * @RPORT_EV_NONE: No event
+ * @RPORT_EV_READY: Remote port is ready for use
+ * @RPORT_EV_FAILED: State machine failed, remote port is not ready
+ * @RPORT_EV_STOP: Remote port has been stopped
+ * @RPORT_EV_LOGO: Remote port logout (LOGO) sent
+ */
enum fc_rport_event {
RPORT_EV_NONE = 0,
RPORT_EV_READY,
@@ -171,6 +145,10 @@
struct fc_rport_priv;
+/**
+ * struct fc_rport_operations - Operations for a remote port
+ * @event_callback: Function to be called for remote port events
+ */
struct fc_rport_operations {
void (*event_callback)(struct fc_lport *, struct fc_rport_priv *,
enum fc_rport_event);
@@ -178,11 +156,11 @@
/**
* struct fc_rport_libfc_priv - libfc internal information about a remote port
- * @local_port: Fibre Channel host port instance
- * @rp_state: indicates READY for I/O or DELETE when blocked.
- * @flags: REC and RETRY supported flags
- * @e_d_tov: error detect timeout value (in msec)
- * @r_a_tov: resource allocation timeout value (in msec)
+ * @local_port: The associated local port
+ * @rp_state: Indicates READY for I/O or DELETE when blocked
+ * @flags: REC and RETRY supported flags
+ * @e_d_tov: Error detect timeout value (in msec)
+ * @r_a_tov: Resource allocation timeout value (in msec)
*/
struct fc_rport_libfc_priv {
struct fc_lport *local_port;
@@ -195,47 +173,66 @@
};
/**
- * struct fc_rport_priv - libfc rport and discovery info about a remote port
- * @local_port: Fibre Channel host port instance
- * @rport: transport remote port
- * @kref: reference counter
- * @rp_state: state tracks progress of PLOGI, PRLI, and RTV exchanges
- * @ids: remote port identifiers and roles
- * @flags: REC and RETRY supported flags
- * @max_seq: maximum number of concurrent sequences
- * @disc_id: discovery identifier
- * @maxframe_size: maximum frame size
- * @retries: retry count in current state
- * @e_d_tov: error detect timeout value (in msec)
- * @r_a_tov: resource allocation timeout value (in msec)
- * @rp_mutex: mutex protects rport
- * @retry_work:
- * @event_callback: Callback for rport READY, FAILED or LOGO
+ * struct fc_rport_priv - libfc remote port and discovery info
+ * @local_port: The associated local port
+ * @rport: The FC transport remote port
+ * @kref: Reference counter
+ * @rp_state: Enumeration that tracks progress of PLOGI, PRLI,
+ * and RTV exchanges
+ * @ids: The remote port identifiers and roles
+ * @flags: REC and RETRY supported flags
+ * @max_seq: Maximum number of concurrent sequences
+ * @disc_id: The discovery identifier
+ * @maxframe_size: The maximum frame size
+ * @retries: The retry count for the current state
+ * @e_d_tov: Error detect timeout value (in msec)
+ * @r_a_tov: Resource allocation timeout value (in msec)
+ * @rp_mutex: The mutex that protects the remote port
+ * @retry_work: Handle for retries
+ * @event_callback: Callback when READY, FAILED or LOGO states complete
*/
struct fc_rport_priv {
- struct fc_lport *local_port;
- struct fc_rport *rport;
- struct kref kref;
- enum fc_rport_state rp_state;
+ struct fc_lport *local_port;
+ struct fc_rport *rport;
+ struct kref kref;
+ enum fc_rport_state rp_state;
struct fc_rport_identifiers ids;
- u16 flags;
- u16 max_seq;
- u16 disc_id;
- u16 maxframe_size;
- unsigned int retries;
- unsigned int e_d_tov;
- unsigned int r_a_tov;
- struct mutex rp_mutex;
- struct delayed_work retry_work;
- enum fc_rport_event event;
- struct fc_rport_operations *ops;
- struct list_head peers;
- struct work_struct event_work;
- u32 supported_classes;
+ u16 flags;
+ u16 max_seq;
+ u16 disc_id;
+ u16 maxframe_size;
+ unsigned int retries;
+ unsigned int e_d_tov;
+ unsigned int r_a_tov;
+ struct mutex rp_mutex;
+ struct delayed_work retry_work;
+ enum fc_rport_event event;
+ struct fc_rport_operations *ops;
+ struct list_head peers;
+ struct work_struct event_work;
+ u32 supported_classes;
};
-/*
- * fcoe stats structure
+/**
+ * struct fcoe_dev_stats - fcoe stats structure
+ * @SecondsSinceLastReset: Seconds since the last reset
+ * @TxFrames: Number of transmitted frames
+ * @TxWords: Number of transmitted words
+ * @RxFrames: Number of received frames
+ * @RxWords: Number of received words
+ * @ErrorFrames: Number of received error frames
+ * @DumpedFrames: Number of dumped frames
+ * @LinkFailureCount: Number of link failures
+ * @LossOfSignalCount: Number for signal losses
+ * @InvalidTxWordCount: Number of invalid transmitted words
+ * @InvalidCRCCount: Number of invalid CRCs
+ * @InputRequests: Number of input requests
+ * @OutputRequests: Number of output requests
+ * @ControlRequests: Number of control requests
+ * @InputMegabytes: Number of received megabytes
+ * @OutputMegabytes: Number of transmitted megabytes
+ * @VLinkFailureCount: Number of virtual link failures
+ * @MissDiscAdvCount: Number of missing FIP discovery advertisement
*/
struct fcoe_dev_stats {
u64 SecondsSinceLastReset;
@@ -254,12 +251,17 @@
u64 ControlRequests;
u64 InputMegabytes;
u64 OutputMegabytes;
+ u64 VLinkFailureCount;
+ u64 MissDiscAdvCount;
};
-/*
- * els data is used for passing ELS respone specific
- * data to send ELS response mainly using infomation
- * in exchange and sequence in EM layer.
+/**
+ * struct fc_seq_els_data - ELS data used for passing ELS specific responses
+ * @fp: The ELS frame
+ * @reason: The reason for rejection
+ * @explan: The explaination of the rejection
+ *
+ * Mainly used by the exchange manager layer.
*/
struct fc_seq_els_data {
struct fc_frame *fp;
@@ -267,77 +269,87 @@
enum fc_els_rjt_explan explan;
};
-/*
- * FCP request structure, one for each scsi cmd request
+/**
+ * struct fc_fcp_pkt - FCP request structure (one for each scsi_cmnd request)
+ * @lp: The associated local port
+ * @state: The state of the I/O
+ * @tgt_flags: Target's flags
+ * @ref_cnt: Reference count
+ * @scsi_pkt_lock: Lock to protect the SCSI packet (must be taken before the
+ * host_lock if both are to be held at the same time)
+ * @cmd: The SCSI command (set and clear with the host_lock held)
+ * @list: Tracks queued commands (accessed with the host_lock held)
+ * @timer: The command timer
+ * @tm_done: Completion indicator
+ * @wait_for_comp: Indicator to wait for completion of the I/O (in jiffies)
+ * @start_time: Timestamp indicating the start of the I/O (in jiffies)
+ * @end_time: Timestamp indicating the end of the I/O (in jiffies)
+ * @last_pkt_time: Timestamp of the last frame received (in jiffies)
+ * @data_len: The length of the data
+ * @cdb_cmd: The CDB command
+ * @xfer_len: The transfer length
+ * @xfer_ddp: Indicates if this transfer used DDP (XID of the exchange
+ * will be set here if DDP was setup)
+ * @xfer_contig_end: The offset into the buffer if the buffer is contiguous
+ * (Tx and Rx)
+ * @max_payload: The maximum payload size (in bytes)
+ * @io_status: SCSI result (upper 24 bits)
+ * @cdb_status: CDB status
+ * @status_code: FCP I/O status
+ * @scsi_comp_flags: Completion flags (bit 3 Underrun bit 2: overrun)
+ * @req_flags: Request flags (bit 0: read bit:1 write)
+ * @scsi_resid: SCSI residule length
+ * @rport: The remote port that the SCSI command is targeted at
+ * @seq_ptr: The sequence that will carry the SCSI command
+ * @recov_retry: Number of recovery retries
+ * @recov_seq: The sequence for REC or SRR
*/
struct fc_fcp_pkt {
- /*
- * housekeeping stuff
- */
- struct fc_lport *lp; /* handle to hba struct */
- u16 state; /* scsi_pkt state state */
- u16 tgt_flags; /* target flags */
- atomic_t ref_cnt; /* fcp pkt ref count */
- spinlock_t scsi_pkt_lock; /* Must be taken before the host lock
- * if both are held at the same time */
- /*
- * SCSI I/O related stuff
- */
- struct scsi_cmnd *cmd; /* scsi command pointer. set/clear
- * under host lock */
- struct list_head list; /* tracks queued commands. access under
- * host lock */
- /*
- * timeout related stuff
- */
- struct timer_list timer; /* command timer */
+ /* Housekeeping information */
+ struct fc_lport *lp;
+ u16 state;
+ u16 tgt_flags;
+ atomic_t ref_cnt;
+ spinlock_t scsi_pkt_lock;
+
+ /* SCSI I/O related information */
+ struct scsi_cmnd *cmd;
+ struct list_head list;
+
+ /* Timeout related information */
+ struct timer_list timer;
struct completion tm_done;
- int wait_for_comp;
- unsigned long start_time; /* start jiffie */
- unsigned long end_time; /* end jiffie */
- unsigned long last_pkt_time; /* jiffies of last frame received */
+ int wait_for_comp;
+ unsigned long start_time;
+ unsigned long end_time;
+ unsigned long last_pkt_time;
- /*
- * scsi cmd and data transfer information
- */
- u32 data_len;
- /*
- * transport related veriables
- */
- struct fcp_cmnd cdb_cmd;
- size_t xfer_len;
- u16 xfer_ddp; /* this xfer is ddped */
- u32 xfer_contig_end; /* offset of end of contiguous xfer */
- u16 max_payload; /* max payload size in bytes */
+ /* SCSI command and data transfer information */
+ u32 data_len;
- /*
- * scsi/fcp return status
- */
- u32 io_status; /* SCSI result upper 24 bits */
- u8 cdb_status;
- u8 status_code; /* FCP I/O status */
- /* bit 3 Underrun bit 2: overrun */
- u8 scsi_comp_flags;
- u32 req_flags; /* bit 0: read bit:1 write */
- u32 scsi_resid; /* residule length */
+ /* Transport related veriables */
+ struct fcp_cmnd cdb_cmd;
+ size_t xfer_len;
+ u16 xfer_ddp;
+ u32 xfer_contig_end;
+ u16 max_payload;
- struct fc_rport *rport; /* remote port pointer */
- struct fc_seq *seq_ptr; /* current sequence pointer */
- /*
- * Error Processing
- */
- u8 recov_retry; /* count of recovery retries */
- struct fc_seq *recov_seq; /* sequence for REC or SRR */
+ /* SCSI/FCP return status */
+ u32 io_status;
+ u8 cdb_status;
+ u8 status_code;
+ u8 scsi_comp_flags;
+ u32 req_flags;
+ u32 scsi_resid;
+
+ /* Associated structures */
+ struct fc_rport *rport;
+ struct fc_seq *seq_ptr;
+
+ /* Error Processing information */
+ u8 recov_retry;
+ struct fc_seq *recov_seq;
};
-/*
- * FC_FCP HELPER FUNCTIONS
- *****************************/
-static inline bool fc_fcp_is_read(const struct fc_fcp_pkt *fsp)
-{
- if (fsp && fsp->cmd)
- return fsp->cmd->sc_data_direction == DMA_FROM_DEVICE;
- return false;
-}
/*
* Structure and function definitions for managing Fibre Channel Exchanges
@@ -350,23 +362,51 @@
struct fc_exch_mgr;
struct fc_exch_mgr_anchor;
-extern u16 fc_cpu_mask; /* cpu mask for possible cpus */
+extern u16 fc_cpu_mask; /* cpu mask for possible cpus */
-/*
- * Sequence.
+/**
+ * struct fc_seq - FC sequence
+ * @id: The sequence ID
+ * @ssb_stat: Status flags for the sequence status block (SSB)
+ * @cnt: Number of frames sent so far
+ * @rec_data: FC-4 value for REC
*/
struct fc_seq {
- u8 id; /* seq ID */
- u16 ssb_stat; /* status flags for sequence status block */
- u16 cnt; /* frames sent so far on sequence */
- u32 rec_data; /* FC-4 value for REC */
+ u8 id;
+ u16 ssb_stat;
+ u16 cnt;
+ u32 rec_data;
};
#define FC_EX_DONE (1 << 0) /* ep is completed */
#define FC_EX_RST_CLEANUP (1 << 1) /* reset is forcing completion */
-/*
- * Exchange.
+/**
+ * struct fc_exch - Fibre Channel Exchange
+ * @em: Exchange manager
+ * @pool: Exchange pool
+ * @state: The exchange's state
+ * @xid: The exchange ID
+ * @ex_list: Handle used by the EM to track free exchanges
+ * @ex_lock: Lock that protects the exchange
+ * @ex_refcnt: Reference count
+ * @timeout_work: Handle for timeout handler
+ * @lp: The local port that this exchange is on
+ * @oxid: Originator's exchange ID
+ * @rxid: Responder's exchange ID
+ * @oid: Originator's FCID
+ * @sid: Source FCID
+ * @did: Destination FCID
+ * @esb_stat: ESB exchange status
+ * @r_a_tov: Resouce allocation time out value (in msecs)
+ * @seq_id: The next sequence ID to use
+ * @f_ctl: F_CTL flags for the sequence
+ * @fh_type: The frame type
+ * @class: The class of service
+ * @seq: The sequence in use on this exchange
+ * @resp: Callback for responses on this exchange
+ * @destructor: Called when destroying the exchange
+ * @arg: Passed as a void pointer to the resp() callback
*
* Locking notes: The ex_lock protects following items:
* state, esb_stat, f_ctl, seq.ssb_stat
@@ -374,76 +414,59 @@
* sequence allocation
*/
struct fc_exch {
- struct fc_exch_mgr *em; /* exchange manager */
- struct fc_exch_pool *pool; /* per cpu exches pool */
- u32 state; /* internal driver state */
- u16 xid; /* our exchange ID */
- struct list_head ex_list; /* free or busy list linkage */
- spinlock_t ex_lock; /* lock covering exchange state */
- atomic_t ex_refcnt; /* reference counter */
- struct delayed_work timeout_work; /* timer for upper level protocols */
- struct fc_lport *lp; /* fc device instance */
- u16 oxid; /* originator's exchange ID */
- u16 rxid; /* responder's exchange ID */
- u32 oid; /* originator's FCID */
- u32 sid; /* source FCID */
- u32 did; /* destination FCID */
- u32 esb_stat; /* exchange status for ESB */
- u32 r_a_tov; /* r_a_tov from rport (msec) */
- u8 seq_id; /* next sequence ID to use */
- u32 f_ctl; /* F_CTL flags for sequences */
- u8 fh_type; /* frame type */
- enum fc_class class; /* class of service */
- struct fc_seq seq; /* single sequence */
- /*
- * Handler for responses to this current exchange.
- */
- void (*resp)(struct fc_seq *, struct fc_frame *, void *);
- void (*destructor)(struct fc_seq *, void *);
- /*
- * arg is passed as void pointer to exchange
- * resp and destructor handlers
- */
- void *arg;
+ struct fc_exch_mgr *em;
+ struct fc_exch_pool *pool;
+ u32 state;
+ u16 xid;
+ struct list_head ex_list;
+ spinlock_t ex_lock;
+ atomic_t ex_refcnt;
+ struct delayed_work timeout_work;
+ struct fc_lport *lp;
+ u16 oxid;
+ u16 rxid;
+ u32 oid;
+ u32 sid;
+ u32 did;
+ u32 esb_stat;
+ u32 r_a_tov;
+ u8 seq_id;
+ u32 f_ctl;
+ u8 fh_type;
+ enum fc_class class;
+ struct fc_seq seq;
+
+ void (*resp)(struct fc_seq *, struct fc_frame *, void *);
+ void *arg;
+
+ void (*destructor)(struct fc_seq *, void *);
+
};
#define fc_seq_exch(sp) container_of(sp, struct fc_exch, seq)
-struct libfc_function_template {
+struct libfc_function_template {
/*
* Interface to send a FC frame
*
* STATUS: REQUIRED
*/
- int (*frame_send)(struct fc_lport *lp, struct fc_frame *fp);
+ int (*frame_send)(struct fc_lport *, struct fc_frame *);
/*
* Interface to send ELS/CT frames
*
* STATUS: OPTIONAL
*/
- struct fc_seq *(*elsct_send)(struct fc_lport *lport,
- u32 did,
- struct fc_frame *fp,
- unsigned int op,
+ struct fc_seq *(*elsct_send)(struct fc_lport *, u32 did,
+ struct fc_frame *, unsigned int op,
void (*resp)(struct fc_seq *,
- struct fc_frame *fp,
- void *arg),
+ struct fc_frame *, void *arg),
void *arg, u32 timer_msec);
/*
* Send the FC frame payload using a new exchange and sequence.
*
- * The frame pointer with some of the header's fields must be
- * filled before calling exch_seq_send(), those fields are,
- *
- * - routing control
- * - FC port did
- * - FC port sid
- * - FC header type
- * - frame control
- * - parameter or relative offset
- *
* The exchange response handler is set in this routine to resp()
* function pointer. It can be called in two scenarios: if a timeout
* occurs or if a response frame is received for the exchange. The
@@ -464,14 +487,13 @@
*
* STATUS: OPTIONAL
*/
- struct fc_seq *(*exch_seq_send)(struct fc_lport *lp,
- struct fc_frame *fp,
- void (*resp)(struct fc_seq *sp,
- struct fc_frame *fp,
- void *arg),
- void (*destructor)(struct fc_seq *sp,
- void *arg),
- void *arg, unsigned int timer_msec);
+ struct fc_seq *(*exch_seq_send)(struct fc_lport *, struct fc_frame *,
+ void (*resp)(struct fc_seq *,
+ struct fc_frame *,
+ void *),
+ void (*destructor)(struct fc_seq *,
+ void *),
+ void *, unsigned int timer_msec);
/*
* Sets up the DDP context for a given exchange id on the given
@@ -479,22 +501,28 @@
*
* STATUS: OPTIONAL
*/
- int (*ddp_setup)(struct fc_lport *lp, u16 xid,
- struct scatterlist *sgl, unsigned int sgc);
+ int (*ddp_setup)(struct fc_lport *, u16, struct scatterlist *,
+ unsigned int);
/*
* Completes the DDP transfer and returns the length of data DDPed
* for the given exchange id.
*
* STATUS: OPTIONAL
*/
- int (*ddp_done)(struct fc_lport *lp, u16 xid);
+ int (*ddp_done)(struct fc_lport *, u16);
+ /*
+ * Allow LLD to fill its own Link Error Status Block
+ *
+ * STATUS: OPTIONAL
+ */
+ void (*get_lesb)(struct fc_lport *, struct fc_els_lesb *lesb);
/*
* Send a frame using an existing sequence and exchange.
*
* STATUS: OPTIONAL
*/
- int (*seq_send)(struct fc_lport *lp, struct fc_seq *sp,
- struct fc_frame *fp);
+ int (*seq_send)(struct fc_lport *, struct fc_seq *,
+ struct fc_frame *);
/*
* Send an ELS response using infomation from a previous
@@ -502,8 +530,8 @@
*
* STATUS: OPTIONAL
*/
- void (*seq_els_rsp_send)(struct fc_seq *sp, enum fc_els_cmd els_cmd,
- struct fc_seq_els_data *els_data);
+ void (*seq_els_rsp_send)(struct fc_seq *, enum fc_els_cmd,
+ struct fc_seq_els_data *);
/*
* Abort an exchange and sequence. Generally called because of a
@@ -515,7 +543,7 @@
*
* STATUS: OPTIONAL
*/
- int (*seq_exch_abort)(const struct fc_seq *req_sp,
+ int (*seq_exch_abort)(const struct fc_seq *,
unsigned int timer_msec);
/*
@@ -524,14 +552,14 @@
*
* STATUS: OPTIONAL
*/
- void (*exch_done)(struct fc_seq *sp);
+ void (*exch_done)(struct fc_seq *);
/*
* Start a new sequence on the same exchange/sequence tuple.
*
* STATUS: OPTIONAL
*/
- struct fc_seq *(*seq_start_next)(struct fc_seq *sp);
+ struct fc_seq *(*seq_start_next)(struct fc_seq *);
/*
* Reset an exchange manager, completing all sequences and exchanges.
@@ -540,8 +568,7 @@
*
* STATUS: OPTIONAL
*/
- void (*exch_mgr_reset)(struct fc_lport *,
- u32 s_id, u32 d_id);
+ void (*exch_mgr_reset)(struct fc_lport *, u32 s_id, u32 d_id);
/*
* Flush the rport work queue. Generally used before shutdown.
@@ -555,8 +582,8 @@
*
* STATUS: OPTIONAL
*/
- void (*lport_recv)(struct fc_lport *lp, struct fc_seq *sp,
- struct fc_frame *fp);
+ void (*lport_recv)(struct fc_lport *, struct fc_seq *,
+ struct fc_frame *);
/*
* Reset the local port.
@@ -566,6 +593,26 @@
int (*lport_reset)(struct fc_lport *);
/*
+ * Set the local port FC_ID.
+ *
+ * This may be provided by the LLD to allow it to be
+ * notified when the local port is assigned a FC-ID.
+ *
+ * The frame, if non-NULL, is the incoming frame with the
+ * FLOGI LS_ACC or FLOGI, and may contain the granted MAC
+ * address for the LLD. The frame pointer may be NULL if
+ * no MAC is associated with this assignment (LOGO or PLOGI).
+ *
+ * If FC_ID is non-zero, r_a_tov and e_d_tov must be valid.
+ *
+ * Note: this is called with the local port mutex held.
+ *
+ * STATUS: OPTIONAL
+ */
+ void (*lport_set_port_id)(struct fc_lport *, u32 port_id,
+ struct fc_frame *);
+
+ /*
* Create a remote port with a given port ID
*
* STATUS: OPTIONAL
@@ -622,31 +669,31 @@
*
* STATUS: OPTIONAL
*/
- int (*fcp_cmd_send)(struct fc_lport *lp, struct fc_fcp_pkt *fsp,
- void (*resp)(struct fc_seq *, struct fc_frame *fp,
- void *arg));
+ int (*fcp_cmd_send)(struct fc_lport *, struct fc_fcp_pkt *,
+ void (*resp)(struct fc_seq *, struct fc_frame *,
+ void *));
/*
* Cleanup the FCP layer, used durring link down and reset
*
* STATUS: OPTIONAL
*/
- void (*fcp_cleanup)(struct fc_lport *lp);
+ void (*fcp_cleanup)(struct fc_lport *);
/*
* Abort all I/O on a local port
*
* STATUS: OPTIONAL
*/
- void (*fcp_abort_io)(struct fc_lport *lp);
+ void (*fcp_abort_io)(struct fc_lport *);
/*
* Receive a request for the discovery layer.
*
* STATUS: OPTIONAL
*/
- void (*disc_recv_req)(struct fc_seq *,
- struct fc_frame *, struct fc_lport *);
+ void (*disc_recv_req)(struct fc_seq *, struct fc_frame *,
+ struct fc_lport *);
/*
* Start discovery for a local port.
@@ -675,419 +722,340 @@
void (*disc_stop_final) (struct fc_lport *);
};
-/* information used by the discovery layer */
+/**
+ * struct fc_disc - Discovery context
+ * @retry_count: Number of retries
+ * @pending: 1 if discovery is pending, 0 if not
+ * @requesting: 1 if discovery has been requested, 0 if not
+ * @seq_count: Number of sequences used for discovery
+ * @buf_len: Length of the discovery buffer
+ * @disc_id: Discovery ID
+ * @rports: List of discovered remote ports
+ * @lport: The local port that discovery is for
+ * @disc_mutex: Mutex that protects the discovery context
+ * @partial_buf: Partial name buffer (if names are returned
+ * in multiple frames)
+ * @disc_work: handle for delayed work context
+ * @disc_callback: Callback routine called when discovery completes
+ */
struct fc_disc {
- unsigned char retry_count;
- unsigned char pending;
- unsigned char requested;
- unsigned short seq_count;
- unsigned char buf_len;
- u16 disc_id;
+ unsigned char retry_count;
+ unsigned char pending;
+ unsigned char requested;
+ unsigned short seq_count;
+ unsigned char buf_len;
+ u16 disc_id;
+
+ struct list_head rports;
+ struct fc_lport *lport;
+ struct mutex disc_mutex;
+ struct fc_gpn_ft_resp partial_buf;
+ struct delayed_work disc_work;
void (*disc_callback)(struct fc_lport *,
enum fc_disc_event);
-
- struct list_head rports;
- struct fc_lport *lport;
- struct mutex disc_mutex;
- struct fc_gpn_ft_resp partial_buf; /* partial name buffer */
- struct delayed_work disc_work;
};
+/**
+ * struct fc_lport - Local port
+ * @host: The SCSI host associated with a local port
+ * @ema_list: Exchange manager anchor list
+ * @dns_rdata: The directory server remote port
+ * @ptp_rdata: Point to point remote port
+ * @scsi_priv: FCP layer internal data
+ * @disc: Discovery context
+ * @vports: Child vports if N_Port
+ * @vport: Parent vport if VN_Port
+ * @tt: Libfc function template
+ * @link_up: Link state (1 = link up, 0 = link down)
+ * @qfull: Queue state (1 queue is full, 0 queue is not full)
+ * @state: Identifies the state
+ * @boot_time: Timestamp indicating when the local port came online
+ * @host_stats: SCSI host statistics
+ * @dev_stats: FCoE device stats (TODO: libfc should not be
+ * FCoE aware)
+ * @retry_count: Number of retries in the current state
+ * @wwpn: World Wide Port Name
+ * @wwnn: World Wide Node Name
+ * @service_params: Common service parameters
+ * @e_d_tov: Error detection timeout value
+ * @r_a_tov: Resouce allocation timeout value
+ * @rnid_gen: RNID information
+ * @sg_supp: Indicates if scatter gather is supported
+ * @seq_offload: Indicates if sequence offload is supported
+ * @crc_offload: Indicates if CRC offload is supported
+ * @lro_enabled: Indicates if large receive offload is supported
+ * @does_npiv: Supports multiple vports
+ * @npiv_enabled: Switch/fabric allows NPIV
+ * @mfs: The maximum Fibre Channel payload size
+ * @max_retry_count: The maximum retry attempts
+ * @max_rport_retry_count: The maximum remote port retry attempts
+ * @lro_xid: The maximum XID for LRO
+ * @lso_max: The maximum large offload send size
+ * @fcts: FC-4 type mask
+ * @lp_mutex: Mutex to protect the local port
+ * @list: Handle for list of local ports
+ * @retry_work: Handle to local port for delayed retry context
+ */
struct fc_lport {
- struct list_head list;
-
/* Associations */
- struct Scsi_Host *host;
- struct list_head ema_list;
- struct fc_rport_priv *dns_rp;
- struct fc_rport_priv *ptp_rp;
- void *scsi_priv;
- struct fc_disc disc;
+ struct Scsi_Host *host;
+ struct list_head ema_list;
+ struct fc_rport_priv *dns_rdata;
+ struct fc_rport_priv *ptp_rdata;
+ void *scsi_priv;
+ struct fc_disc disc;
+
+ /* Virtual port information */
+ struct list_head vports;
+ struct fc_vport *vport;
/* Operational Information */
struct libfc_function_template tt;
- u8 link_up;
- u8 qfull;
- enum fc_lport_state state;
- unsigned long boot_time;
+ u8 link_up;
+ u8 qfull;
+ enum fc_lport_state state;
+ unsigned long boot_time;
+ struct fc_host_statistics host_stats;
+ struct fcoe_dev_stats *dev_stats;
+ u8 retry_count;
- struct fc_host_statistics host_stats;
- struct fcoe_dev_stats *dev_stats;
-
- u64 wwpn;
- u64 wwnn;
- u8 retry_count;
+ /* Fabric information */
+ u64 wwpn;
+ u64 wwnn;
+ unsigned int service_params;
+ unsigned int e_d_tov;
+ unsigned int r_a_tov;
+ struct fc_els_rnid_gen rnid_gen;
/* Capabilities */
- u32 sg_supp:1; /* scatter gather supported */
- u32 seq_offload:1; /* seq offload supported */
- u32 crc_offload:1; /* crc offload supported */
- u32 lro_enabled:1; /* large receive offload */
- u32 mfs; /* max FC payload size */
- unsigned int service_params;
- unsigned int e_d_tov;
- unsigned int r_a_tov;
- u8 max_retry_count;
- u8 max_rport_retry_count;
- u16 link_speed;
- u16 link_supported_speeds;
- u16 lro_xid; /* max xid for fcoe lro */
- unsigned int lso_max; /* max large send size */
- struct fc_ns_fts fcts; /* FC-4 type masks */
- struct fc_els_rnid_gen rnid_gen; /* RNID information */
-
- /* Semaphores */
- struct mutex lp_mutex;
+ u32 sg_supp:1;
+ u32 seq_offload:1;
+ u32 crc_offload:1;
+ u32 lro_enabled:1;
+ u32 does_npiv:1;
+ u32 npiv_enabled:1;
+ u32 mfs;
+ u8 max_retry_count;
+ u8 max_rport_retry_count;
+ u16 link_speed;
+ u16 link_supported_speeds;
+ u16 lro_xid;
+ unsigned int lso_max;
+ struct fc_ns_fts fcts;
/* Miscellaneous */
- struct delayed_work retry_work;
- struct delayed_work disc_work;
+ struct mutex lp_mutex;
+ struct list_head list;
+ struct delayed_work retry_work;
};
/*
* FC_LPORT HELPER FUNCTIONS
*****************************/
-static inline int fc_lport_test_ready(struct fc_lport *lp)
+
+/**
+ * fc_lport_test_ready() - Determine if a local port is in the READY state
+ * @lport: The local port to test
+ */
+static inline int fc_lport_test_ready(struct fc_lport *lport)
{
- return lp->state == LPORT_ST_READY;
+ return lport->state == LPORT_ST_READY;
}
-static inline void fc_set_wwnn(struct fc_lport *lp, u64 wwnn)
+/**
+ * fc_set_wwnn() - Set the World Wide Node Name of a local port
+ * @lport: The local port whose WWNN is to be set
+ * @wwnn: The new WWNN
+ */
+static inline void fc_set_wwnn(struct fc_lport *lport, u64 wwnn)
{
- lp->wwnn = wwnn;
+ lport->wwnn = wwnn;
}
-static inline void fc_set_wwpn(struct fc_lport *lp, u64 wwnn)
+/**
+ * fc_set_wwpn() - Set the World Wide Port Name of a local port
+ * @lport: The local port whose WWPN is to be set
+ * @wwnn: The new WWPN
+ */
+static inline void fc_set_wwpn(struct fc_lport *lport, u64 wwnn)
{
- lp->wwpn = wwnn;
+ lport->wwpn = wwnn;
}
-static inline void fc_lport_state_enter(struct fc_lport *lp,
+/**
+ * fc_lport_state_enter() - Change a local port's state
+ * @lport: The local port whose state is to change
+ * @state: The new state
+ */
+static inline void fc_lport_state_enter(struct fc_lport *lport,
enum fc_lport_state state)
{
- if (state != lp->state)
- lp->retry_count = 0;
- lp->state = state;
+ if (state != lport->state)
+ lport->retry_count = 0;
+ lport->state = state;
}
-static inline int fc_lport_init_stats(struct fc_lport *lp)
+/**
+ * fc_lport_init_stats() - Allocate per-CPU statistics for a local port
+ * @lport: The local port whose statistics are to be initialized
+ */
+static inline int fc_lport_init_stats(struct fc_lport *lport)
{
- /* allocate per cpu stats block */
- lp->dev_stats = alloc_percpu(struct fcoe_dev_stats);
- if (!lp->dev_stats)
+ lport->dev_stats = alloc_percpu(struct fcoe_dev_stats);
+ if (!lport->dev_stats)
return -ENOMEM;
return 0;
}
-static inline void fc_lport_free_stats(struct fc_lport *lp)
+/**
+ * fc_lport_free_stats() - Free memory for a local port's statistics
+ * @lport: The local port whose statistics are to be freed
+ */
+static inline void fc_lport_free_stats(struct fc_lport *lport)
{
- free_percpu(lp->dev_stats);
-}
-
-static inline struct fcoe_dev_stats *fc_lport_get_stats(struct fc_lport *lp)
-{
- return per_cpu_ptr(lp->dev_stats, smp_processor_id());
-}
-
-static inline void *lport_priv(const struct fc_lport *lp)
-{
- return (void *)(lp + 1);
+ free_percpu(lport->dev_stats);
}
/**
- * libfc_host_alloc() - Allocate a Scsi_Host with room for the fc_lport
- * @sht: ptr to the scsi host templ
- * @priv_size: size of private data after fc_lport
- *
- * Returns: ptr to Scsi_Host
+ * fc_lport_get_stats() - Get a local port's statistics
+ * @lport: The local port whose statistics are to be retreived
*/
-static inline struct Scsi_Host *
+static inline struct fcoe_dev_stats *fc_lport_get_stats(struct fc_lport *lport)
+{
+ return per_cpu_ptr(lport->dev_stats, smp_processor_id());
+}
+
+/**
+ * lport_priv() - Return the private data from a local port
+ * @lport: The local port whose private data is to be retreived
+ */
+static inline void *lport_priv(const struct fc_lport *lport)
+{
+ return (void *)(lport + 1);
+}
+
+/**
+ * libfc_host_alloc() - Allocate a Scsi_Host with room for a local port and
+ * LLD private data
+ * @sht: The SCSI host template
+ * @priv_size: Size of private data
+ *
+ * Returns: libfc lport
+ */
+static inline struct fc_lport *
libfc_host_alloc(struct scsi_host_template *sht, int priv_size)
{
- return scsi_host_alloc(sht, sizeof(struct fc_lport) + priv_size);
+ struct fc_lport *lport;
+ struct Scsi_Host *shost;
+
+ shost = scsi_host_alloc(sht, sizeof(*lport) + priv_size);
+ if (!shost)
+ return NULL;
+ lport = shost_priv(shost);
+ lport->host = shost;
+ INIT_LIST_HEAD(&lport->ema_list);
+ INIT_LIST_HEAD(&lport->vports);
+ return lport;
+}
+
+/*
+ * FC_FCP HELPER FUNCTIONS
+ *****************************/
+static inline bool fc_fcp_is_read(const struct fc_fcp_pkt *fsp)
+{
+ if (fsp && fsp->cmd)
+ return fsp->cmd->sc_data_direction == DMA_FROM_DEVICE;
+ return false;
}
/*
* LOCAL PORT LAYER
*****************************/
-int fc_lport_init(struct fc_lport *lp);
-
-/*
- * Destroy the specified local port by finding and freeing all
- * fc_rports associated with it and then by freeing the fc_lport
- * itself.
- */
-int fc_lport_destroy(struct fc_lport *lp);
-
-/*
- * Logout the specified local port from the fabric
- */
-int fc_fabric_logoff(struct fc_lport *lp);
-
-/*
- * Initiate the LP state machine. This handler will use fc_host_attr
- * to store the FLOGI service parameters, so fc_host_attr must be
- * initialized before calling this handler.
- */
-int fc_fabric_login(struct fc_lport *lp);
-
-/*
- * The link is up for the given local port.
- */
+int fc_lport_init(struct fc_lport *);
+int fc_lport_destroy(struct fc_lport *);
+int fc_fabric_logoff(struct fc_lport *);
+int fc_fabric_login(struct fc_lport *);
+void __fc_linkup(struct fc_lport *);
void fc_linkup(struct fc_lport *);
-
-/*
- * Link is down for the given local port.
- */
+void __fc_linkdown(struct fc_lport *);
void fc_linkdown(struct fc_lport *);
-
-/*
- * Configure the local port.
- */
+void fc_vport_setlink(struct fc_lport *);
+void fc_vports_linkchange(struct fc_lport *);
int fc_lport_config(struct fc_lport *);
-
-/*
- * Reset the local port.
- */
int fc_lport_reset(struct fc_lport *);
-
-/*
- * Set the mfs or reset
- */
-int fc_set_mfs(struct fc_lport *lp, u32 mfs);
-
+int fc_set_mfs(struct fc_lport *, u32 mfs);
+struct fc_lport *libfc_vport_create(struct fc_vport *, int privsize);
+struct fc_lport *fc_vport_id_lookup(struct fc_lport *, u32 port_id);
+int fc_lport_bsg_request(struct fc_bsg_job *);
/*
* REMOTE PORT LAYER
*****************************/
-int fc_rport_init(struct fc_lport *lp);
-void fc_rport_terminate_io(struct fc_rport *rp);
+int fc_rport_init(struct fc_lport *);
+void fc_rport_terminate_io(struct fc_rport *);
/*
* DISCOVERY LAYER
*****************************/
-int fc_disc_init(struct fc_lport *lp);
-
+int fc_disc_init(struct fc_lport *);
/*
- * SCSI LAYER
+ * FCP LAYER
*****************************/
-/*
- * Initialize the SCSI block of libfc
- */
int fc_fcp_init(struct fc_lport *);
-
-/*
- * This section provides an API which allows direct interaction
- * with the SCSI-ml. Each of these functions satisfies a function
- * pointer defined in Scsi_Host and therefore is always called
- * directly from the SCSI-ml.
- */
-int fc_queuecommand(struct scsi_cmnd *sc_cmd,
- void (*done)(struct scsi_cmnd *));
-
-/*
- * complete processing of a fcp packet
- *
- * This function may sleep if a fsp timer is pending.
- * The host lock must not be held by caller.
- */
-void fc_fcp_complete(struct fc_fcp_pkt *fsp);
-
-/*
- * Send an ABTS frame to the target device. The sc_cmd argument
- * is a pointer to the SCSI command to be aborted.
- */
-int fc_eh_abort(struct scsi_cmnd *sc_cmd);
-
-/*
- * Reset a LUN by sending send the tm cmd to the target.
- */
-int fc_eh_device_reset(struct scsi_cmnd *sc_cmd);
-
-/*
- * Reset the host adapter.
- */
-int fc_eh_host_reset(struct scsi_cmnd *sc_cmd);
-
-/*
- * Check rport status.
- */
-int fc_slave_alloc(struct scsi_device *sdev);
-
-/*
- * Adjust the queue depth.
- */
-int fc_change_queue_depth(struct scsi_device *sdev, int qdepth);
-
-/*
- * Change the tag type.
- */
-int fc_change_queue_type(struct scsi_device *sdev, int tag_type);
-
-/*
- * Free memory pools used by the FCP layer.
- */
void fc_fcp_destroy(struct fc_lport *);
/*
- * Set up direct-data placement for this I/O request
- */
-void fc_fcp_ddp_setup(struct fc_fcp_pkt *fsp, u16 xid);
+ * SCSI INTERACTION LAYER
+ *****************************/
+int fc_queuecommand(struct scsi_cmnd *,
+ void (*done)(struct scsi_cmnd *));
+int fc_eh_abort(struct scsi_cmnd *);
+int fc_eh_device_reset(struct scsi_cmnd *);
+int fc_eh_host_reset(struct scsi_cmnd *);
+int fc_slave_alloc(struct scsi_device *);
+int fc_change_queue_depth(struct scsi_device *, int qdepth, int reason);
+int fc_change_queue_type(struct scsi_device *, int tag_type);
/*
* ELS/CT interface
*****************************/
-/*
- * Initializes ELS/CT interface
- */
-int fc_elsct_init(struct fc_lport *lp);
+int fc_elsct_init(struct fc_lport *);
+struct fc_seq *fc_elsct_send(struct fc_lport *, u32 did,
+ struct fc_frame *,
+ unsigned int op,
+ void (*resp)(struct fc_seq *,
+ struct fc_frame *,
+ void *arg),
+ void *arg, u32 timer_msec);
+void fc_lport_flogi_resp(struct fc_seq *, struct fc_frame *, void *);
+void fc_lport_logo_resp(struct fc_seq *, struct fc_frame *, void *);
/*
* EXCHANGE MANAGER LAYER
*****************************/
-/*
- * Initializes Exchange Manager related
- * function pointers in struct libfc_function_template.
- */
-int fc_exch_init(struct fc_lport *lp);
-
-/*
- * Adds Exchange Manager (EM) mp to lport.
- *
- * Adds specified mp to lport using struct fc_exch_mgr_anchor,
- * the struct fc_exch_mgr_anchor allows same EM sharing by
- * more than one lport with their specified match function,
- * the match function is used in allocating exchange from
- * added mp.
- */
-struct fc_exch_mgr_anchor *fc_exch_mgr_add(struct fc_lport *lport,
- struct fc_exch_mgr *mp,
+int fc_exch_init(struct fc_lport *);
+struct fc_exch_mgr_anchor *fc_exch_mgr_add(struct fc_lport *,
+ struct fc_exch_mgr *,
bool (*match)(struct fc_frame *));
-
-/*
- * Deletes Exchange Manager (EM) from lport by removing
- * its anchor ema from lport.
- *
- * If removed anchor ema was the last user of its associated EM
- * then also destroys associated EM.
- */
-void fc_exch_mgr_del(struct fc_exch_mgr_anchor *ema);
-
-/*
- * Allocates an Exchange Manager (EM).
- *
- * The EM manages exchanges for their allocation and
- * free, also allows exchange lookup for received
- * frame.
- *
- * The class is used for initializing FC class of
- * allocated exchange from EM.
- *
- * The min_xid and max_xid will limit new
- * exchange ID (XID) within this range for
- * a new exchange.
- * The LLD may choose to have multiple EMs,
- * e.g. one EM instance per CPU receive thread in LLD.
- *
- * Specified match function is used in allocating exchanges
- * from newly allocated EM.
- */
-struct fc_exch_mgr *fc_exch_mgr_alloc(struct fc_lport *lp,
- enum fc_class class,
- u16 min_xid,
- u16 max_xid,
+void fc_exch_mgr_del(struct fc_exch_mgr_anchor *);
+int fc_exch_mgr_list_clone(struct fc_lport *src, struct fc_lport *dst);
+struct fc_exch_mgr *fc_exch_mgr_alloc(struct fc_lport *, enum fc_class class,
+ u16 min_xid, u16 max_xid,
bool (*match)(struct fc_frame *));
-
-/*
- * Free all exchange managers of a lport.
- */
-void fc_exch_mgr_free(struct fc_lport *lport);
-
-/*
- * Receive a frame on specified local port and exchange manager.
- */
-void fc_exch_recv(struct fc_lport *lp, struct fc_frame *fp);
-
-/*
- * This function is for exch_seq_send function pointer in
- * struct libfc_function_template, see comment block on
- * exch_seq_send for description of this function.
- */
-struct fc_seq *fc_exch_seq_send(struct fc_lport *lp,
- struct fc_frame *fp,
- void (*resp)(struct fc_seq *sp,
- struct fc_frame *fp,
- void *arg),
- void (*destructor)(struct fc_seq *sp,
- void *arg),
- void *arg, u32 timer_msec);
-
-/*
- * send a frame using existing sequence and exchange.
- */
-int fc_seq_send(struct fc_lport *lp, struct fc_seq *sp, struct fc_frame *fp);
-
-/*
- * Send ELS response using mainly infomation
- * in exchange and sequence in EM layer.
- */
-void fc_seq_els_rsp_send(struct fc_seq *sp, enum fc_els_cmd els_cmd,
- struct fc_seq_els_data *els_data);
-
-/*
- * This function is for seq_exch_abort function pointer in
- * struct libfc_function_template, see comment block on
- * seq_exch_abort for description of this function.
- */
-int fc_seq_exch_abort(const struct fc_seq *req_sp, unsigned int timer_msec);
-
-/*
- * Indicate that an exchange/sequence tuple is complete and the memory
- * allocated for the related objects may be freed.
- */
-void fc_exch_done(struct fc_seq *sp);
-
-/*
- * Allocate a new exchange and sequence pair.
- */
-struct fc_exch *fc_exch_alloc(struct fc_lport *lport, struct fc_frame *fp);
-/*
- * Start a new sequence on the same exchange as the supplied sequence.
- */
-struct fc_seq *fc_seq_start_next(struct fc_seq *sp);
-
-
-/*
- * Reset all EMs of a lport, releasing its all sequences and
- * exchanges. If sid is non-zero, then reset only exchanges
- * we sourced from that FID. If did is non-zero, reset only
- * exchanges destined to that FID.
- */
+void fc_exch_mgr_free(struct fc_lport *);
+void fc_exch_recv(struct fc_lport *, struct fc_frame *);
void fc_exch_mgr_reset(struct fc_lport *, u32 s_id, u32 d_id);
/*
* Functions for fc_functions_template
*/
-void fc_get_host_speed(struct Scsi_Host *shost);
-void fc_get_host_port_type(struct Scsi_Host *shost);
-void fc_get_host_port_state(struct Scsi_Host *shost);
-void fc_set_rport_loss_tmo(struct fc_rport *rport, u32 timeout);
+void fc_get_host_speed(struct Scsi_Host *);
+void fc_get_host_port_type(struct Scsi_Host *);
+void fc_get_host_port_state(struct Scsi_Host *);
+void fc_set_rport_loss_tmo(struct fc_rport *, u32 timeout);
struct fc_host_statistics *fc_get_host_stats(struct Scsi_Host *);
-/*
- * module setup functions.
- */
-int fc_setup_exch_mgr(void);
-void fc_destroy_exch_mgr(void);
-int fc_setup_rport(void);
-void fc_destroy_rport(void);
-
-/*
- * Internal libfc functions.
- */
-const char *fc_els_resp_type(struct fc_frame *);
-
#endif /* _LIBFC_H_ */
diff --git a/include/scsi/libfcoe.h b/include/scsi/libfcoe.h
index b241060..c603f4a 100644
--- a/include/scsi/libfcoe.h
+++ b/include/scsi/libfcoe.h
@@ -53,33 +53,36 @@
};
/**
- * struct fcoe_ctlr - FCoE Controller and FIP state.
- * @state: internal FIP state for network link and FIP or non-FIP mode.
- * @lp: &fc_lport: libfc local port.
- * @sel_fcf: currently selected FCF, or NULL.
- * @fcfs: list of discovered FCFs.
- * @fcf_count: number of discovered FCF entries.
- * @sol_time: time when a multicast solicitation was last sent.
- * @sel_time: time after which to select an FCF.
- * @port_ka_time: time of next port keep-alive.
- * @ctlr_ka_time: time of next controller keep-alive.
- * @timer: timer struct used for all delayed events.
- * @link_work: &work_struct for doing FCF selection.
- * @recv_work: &work_struct for receiving FIP frames.
+ * struct fcoe_ctlr - FCoE Controller and FIP state
+ * @state: internal FIP state for network link and FIP or non-FIP mode.
+ * @mode: LLD-selected mode.
+ * @lp: &fc_lport: libfc local port.
+ * @sel_fcf: currently selected FCF, or NULL.
+ * @fcfs: list of discovered FCFs.
+ * @fcf_count: number of discovered FCF entries.
+ * @sol_time: time when a multicast solicitation was last sent.
+ * @sel_time: time after which to select an FCF.
+ * @port_ka_time: time of next port keep-alive.
+ * @ctlr_ka_time: time of next controller keep-alive.
+ * @timer: timer struct used for all delayed events.
+ * @link_work: &work_struct for doing FCF selection.
+ * @recv_work: &work_struct for receiving FIP frames.
* @fip_recv_list: list of received FIP frames.
- * @user_mfs: configured maximum FC frame size, including FC header.
- * @flogi_oxid: exchange ID of most recent fabric login.
- * @flogi_count: number of FLOGI attempts in AUTO mode.
- * @link: current link status for libfc.
- * @last_link: last link state reported to libfc.
- * @map_dest: use the FC_MAP mode for destination MAC addresses.
- * @spma: supports SPMA server-provided MACs mode
- * @dest_addr: MAC address of the selected FC forwarder.
- * @ctl_src_addr: the native MAC address of our local port.
- * @data_src_addr: the assigned MAC address for the local port after FLOGI.
- * @send: LLD-supplied function to handle sending of FIP Ethernet frames.
- * @update_mac: LLD-supplied function to handle changes to MAC addresses.
- * @lock: lock protecting this structure.
+ * @user_mfs: configured maximum FC frame size, including FC header.
+ * @flogi_oxid: exchange ID of most recent fabric login.
+ * @flogi_count: number of FLOGI attempts in AUTO mode.
+ * @link: current link status for libfc.
+ * @last_link: last link state reported to libfc.
+ * @map_dest: use the FC_MAP mode for destination MAC addresses.
+ * @spma: supports SPMA server-provided MACs mode
+ * @send_ctlr_ka: need to send controller keep alive
+ * @send_port_ka: need to send port keep alives
+ * @dest_addr: MAC address of the selected FC forwarder.
+ * @ctl_src_addr: the native MAC address of our local port.
+ * @send: LLD-supplied function to handle sending FIP Ethernet frames
+ * @update_mac: LLD-supplied function to handle changes to MAC addresses.
+ * @get_src_addr: LLD-supplied function to supply a source MAC address.
+ * @lock: lock protecting this structure.
*
* This structure is used by all FCoE drivers. It contains information
* needed by all FCoE low-level drivers (LLDs) as well as internal state
@@ -87,6 +90,7 @@
*/
struct fcoe_ctlr {
enum fip_state state;
+ enum fip_state mode;
struct fc_lport *lp;
struct fcoe_fcf *sel_fcf;
struct list_head fcfs;
@@ -104,29 +108,32 @@
u8 flogi_count;
u8 link;
u8 last_link;
+ u8 reset_req;
u8 map_dest;
u8 spma;
+ u8 send_ctlr_ka;
+ u8 send_port_ka;
u8 dest_addr[ETH_ALEN];
u8 ctl_src_addr[ETH_ALEN];
- u8 data_src_addr[ETH_ALEN];
void (*send)(struct fcoe_ctlr *, struct sk_buff *);
- void (*update_mac)(struct fcoe_ctlr *, u8 *old, u8 *new);
+ void (*update_mac)(struct fc_lport *, u8 *addr);
+ u8 * (*get_src_addr)(struct fc_lport *);
spinlock_t lock;
};
-/*
- * struct fcoe_fcf - Fibre-Channel Forwarder.
- * @list: list linkage.
- * @time: system time (jiffies) when an advertisement was last received.
- * @switch_name: WWN of switch from advertisement.
- * @fabric_name: WWN of fabric from advertisement.
- * @fc_map: FC_MAP value from advertisement.
- * @fcf_mac: Ethernet address of the FCF.
- * @vfid: virtual fabric ID.
- * @pri: seletion priority, smaller values are better.
- * @flags: flags received from advertisement.
- * @fka_period: keep-alive period, in jiffies.
+/**
+ * struct fcoe_fcf - Fibre-Channel Forwarder
+ * @list: list linkage
+ * @time: system time (jiffies) when an advertisement was last received
+ * @switch_name: WWN of switch from advertisement
+ * @fabric_name: WWN of fabric from advertisement
+ * @fc_map: FC_MAP value from advertisement
+ * @fcf_mac: Ethernet address of the FCF
+ * @vfid: virtual fabric ID
+ * @pri: selection priority, smaller values are better
+ * @flags: flags received from advertisement
+ * @fka_period: keep-alive period, in jiffies
*
* A Fibre-Channel Forwarder (FCF) is the entity on the Ethernet that
* passes FCoE frames on to an FC fabric. This structure represents
@@ -148,6 +155,7 @@
u8 pri;
u16 flags;
u32 fka_period;
+ u8 fd_flags:1;
};
/* FIP API functions */
@@ -155,9 +163,10 @@
void fcoe_ctlr_destroy(struct fcoe_ctlr *);
void fcoe_ctlr_link_up(struct fcoe_ctlr *);
int fcoe_ctlr_link_down(struct fcoe_ctlr *);
-int fcoe_ctlr_els_send(struct fcoe_ctlr *, struct sk_buff *);
+int fcoe_ctlr_els_send(struct fcoe_ctlr *, struct fc_lport *, struct sk_buff *);
void fcoe_ctlr_recv(struct fcoe_ctlr *, struct sk_buff *);
-int fcoe_ctlr_recv_flogi(struct fcoe_ctlr *, struct fc_frame *fp, u8 *sa);
+int fcoe_ctlr_recv_flogi(struct fcoe_ctlr *, struct fc_lport *,
+ struct fc_frame *);
/* libfcoe funcs */
u64 fcoe_wwn_from_mac(unsigned char mac[], unsigned int, unsigned int);
diff --git a/include/scsi/libiscsi.h b/include/scsi/libiscsi.h
index a72edd4..7394e3b 100644
--- a/include/scsi/libiscsi.h
+++ b/include/scsi/libiscsi.h
@@ -267,6 +267,7 @@
/* configuration */
int abort_timeout;
int lu_reset_timeout;
+ int tgt_reset_timeout;
int initial_r2t_en;
unsigned max_r2t;
int imm_data_en;
@@ -333,7 +334,8 @@
/*
* scsi host template
*/
-extern int iscsi_change_queue_depth(struct scsi_device *sdev, int depth);
+extern int iscsi_change_queue_depth(struct scsi_device *sdev, int depth,
+ int reason);
extern int iscsi_eh_abort(struct scsi_cmnd *sc);
extern int iscsi_eh_target_reset(struct scsi_cmnd *sc);
extern int iscsi_eh_device_reset(struct scsi_cmnd *sc);
diff --git a/include/scsi/libsas.h b/include/scsi/libsas.h
index e78d3b6..9eaa3f0 100644
--- a/include/scsi/libsas.h
+++ b/include/scsi/libsas.h
@@ -634,7 +634,8 @@
extern int sas_slave_alloc(struct scsi_device *);
extern int sas_slave_configure(struct scsi_device *);
extern void sas_slave_destroy(struct scsi_device *);
-extern int sas_change_queue_depth(struct scsi_device *, int new_depth);
+extern int sas_change_queue_depth(struct scsi_device *, int new_depth,
+ int reason);
extern int sas_change_queue_type(struct scsi_device *, int qt);
extern int sas_bios_param(struct scsi_device *,
struct block_device *,
diff --git a/include/scsi/osd_initiator.h b/include/scsi/osd_initiator.h
index 02bd9f7..39d6d10 100644
--- a/include/scsi/osd_initiator.h
+++ b/include/scsi/osd_initiator.h
@@ -48,7 +48,6 @@
*/
struct osd_dev {
struct scsi_device *scsi_device;
- struct file *file;
unsigned def_timeout;
#ifdef OSD_VER1_SUPPORT
@@ -56,10 +55,24 @@
#endif
};
-/* Retrieve/return osd_dev(s) for use by Kernel clients */
-struct osd_dev *osduld_path_lookup(const char *dev_name); /*Use IS_ERR/ERR_PTR*/
+/* Unique Identification of an OSD device */
+struct osd_dev_info {
+ unsigned systemid_len;
+ u8 systemid[OSD_SYSTEMID_LEN];
+ unsigned osdname_len;
+ u8 *osdname;
+};
+
+/* Retrieve/return osd_dev(s) for use by Kernel clients
+ * Use IS_ERR/ERR_PTR on returned "osd_dev *".
+ */
+struct osd_dev *osduld_path_lookup(const char *dev_name);
+struct osd_dev *osduld_info_lookup(const struct osd_dev_info *odi);
void osduld_put_device(struct osd_dev *od);
+const struct osd_dev_info *osduld_device_info(struct osd_dev *od);
+bool osduld_device_same(struct osd_dev *od, const struct osd_dev_info *odi);
+
/* Add/remove test ioctls from external modules */
typedef int (do_test_fn)(struct osd_dev *od, unsigned cmd, unsigned long arg);
int osduld_register_test(unsigned ioctl, do_test_fn *do_test);
@@ -69,8 +82,24 @@
void osd_dev_init(struct osd_dev *od, struct scsi_device *scsi_device);
void osd_dev_fini(struct osd_dev *od);
-/* some hi level device operations */
-int osd_auto_detect_ver(struct osd_dev *od, void *caps); /* GFP_KERNEL */
+/**
+ * osd_auto_detect_ver - Detect the OSD version, return Unique Identification
+ *
+ * @od: OSD target lun handle
+ * @caps: Capabilities authorizing OSD root read attributes access
+ * @odi: Retrieved information uniquely identifying the osd target lun
+ * Note: odi->osdname must be kfreed by caller.
+ *
+ * Auto detects the OSD version of the OSD target and sets the @od
+ * accordingly. Meanwhile also returns the "system id" and "osd name" root
+ * attributes which uniquely identify the OSD target. This member is usually
+ * called by the ULD. ULD users should call osduld_device_info().
+ * This rutine allocates osd requests and memory at GFP_KERNEL level and might
+ * sleep.
+ */
+int osd_auto_detect_ver(struct osd_dev *od,
+ void *caps, struct osd_dev_info *odi);
+
static inline struct request_queue *osd_request_queue(struct osd_dev *od)
{
return od->scsi_device->request_queue;
@@ -84,6 +113,15 @@
#endif
}
+static inline bool osd_dev_is_ver1(struct osd_dev *od)
+{
+#ifdef OSD_VER1_SUPPORT
+ return od->version == OSD_VER1;
+#else
+ return false;
+#endif
+}
+
struct osd_request;
typedef void (osd_req_done_fn)(struct osd_request *or, void *private);
@@ -120,14 +158,9 @@
int async_error;
};
-/* OSD Version control */
static inline bool osd_req_is_ver1(struct osd_request *or)
{
-#ifdef OSD_VER1_SUPPORT
- return or->osd_dev->version == OSD_VER1;
-#else
- return false;
-#endif
+ return osd_dev_is_ver1(or->osd_dev);
}
/*
@@ -234,7 +267,7 @@
* @bad_attr_list - List of failing attributes (optional)
* @max_attr - Size of @bad_attr_list.
*
- * After execution, sense + return code can be analyzed using this function. The
+ * After execution, osd_request results are analyzed using this function. The
* return code is the final disposition on the error. So it is possible that a
* CHECK_CONDITION was returned from target but this will return NO_ERROR, for
* example on recovered errors. All parameters are optional if caller does
@@ -243,7 +276,31 @@
* of the SCSI_OSD_DPRINT_SENSE Kconfig value. Set @silent if you know the
* command would routinely fail, to not spam the dmsg file.
*/
+
+/**
+ * osd_err_priority - osd categorized return codes in ascending severity.
+ *
+ * The categories are borrowed from the pnfs_osd_errno enum.
+ * See comments for translated Linux codes returned by osd_req_decode_sense.
+ */
+enum osd_err_priority {
+ OSD_ERR_PRI_NO_ERROR = 0,
+ /* Recoverable, caller should clear_highpage() all pages */
+ OSD_ERR_PRI_CLEAR_PAGES = 1, /* -EFAULT */
+ OSD_ERR_PRI_RESOURCE = 2, /* -ENOMEM */
+ OSD_ERR_PRI_BAD_CRED = 3, /* -EINVAL */
+ OSD_ERR_PRI_NO_ACCESS = 4, /* -EACCES */
+ OSD_ERR_PRI_UNREACHABLE = 5, /* any other */
+ OSD_ERR_PRI_NOT_FOUND = 6, /* -ENOENT */
+ OSD_ERR_PRI_NO_SPACE = 7, /* -ENOSPC */
+ OSD_ERR_PRI_EIO = 8, /* -EIO */
+};
+
struct osd_sense_info {
+ u64 out_resid; /* Zero on success otherwise out residual */
+ u64 in_resid; /* Zero on success otherwise in residual */
+ enum osd_err_priority osd_err_pri;
+
int key; /* one of enum scsi_sense_keys */
int additional_code ; /* enum osd_additional_sense_codes */
union { /* Sense specific information */
diff --git a/include/scsi/osd_protocol.h b/include/scsi/osd_protocol.h
index 2cc8e8b..6856612 100644
--- a/include/scsi/osd_protocol.h
+++ b/include/scsi/osd_protocol.h
@@ -17,6 +17,7 @@
#define __OSD_PROTOCOL_H__
#include <linux/types.h>
+#include <linux/kernel.h>
#include <asm/unaligned.h>
#include <scsi/scsi.h>
diff --git a/include/scsi/osd_sense.h b/include/scsi/osd_sense.h
index ff9b33c..91db543 100644
--- a/include/scsi/osd_sense.h
+++ b/include/scsi/osd_sense.h
@@ -255,6 +255,9 @@
OSD_CFO_STARTING_BYTE = OSD_CDB_OFFSET(v2.start_address),
OSD_CFO_PARTITION_ID = OSD_CDB_OFFSET(partition),
OSD_CFO_OBJECT_ID = OSD_CDB_OFFSET(object),
+ OSD_CFO_PERMISSIONS = sizeof(struct osd_cdb_head) +
+ offsetof(struct osd_capability_head,
+ permissions_bit_mask),
};
#endif /* ndef __OSD_SENSE_H__ */
diff --git a/include/scsi/scsi.h b/include/scsi/scsi.h
index 34c46ab..8b4deca 100644
--- a/include/scsi/scsi.h
+++ b/include/scsi/scsi.h
@@ -94,6 +94,7 @@
#define WRITE_LONG 0x3f
#define CHANGE_DEFINITION 0x40
#define WRITE_SAME 0x41
+#define UNMAP 0x42
#define READ_TOC 0x43
#define LOG_SELECT 0x4c
#define LOG_SENSE 0x4d
@@ -122,9 +123,11 @@
#define READ_16 0x88
#define WRITE_16 0x8a
#define VERIFY_16 0x8f
+#define WRITE_SAME_16 0x93
#define SERVICE_ACTION_IN 0x9e
/* values for service action in */
#define SAI_READ_CAPACITY_16 0x10
+#define SAI_GET_LBA_STATUS 0x12
/* values for maintenance in */
#define MI_REPORT_TARGET_PGS 0x0a
/* values for maintenance out */
@@ -132,6 +135,7 @@
/* values for variable length command */
#define READ_32 0x09
#define WRITE_32 0x0b
+#define WRITE_SAME_32 0x0d
/* Values for T10/04-262r7 */
#define ATA_16 0x85 /* 16-byte pass-thru */
diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h
index f097ae3..7c44499 100644
--- a/include/scsi/scsi_device.h
+++ b/include/scsi/scsi_device.h
@@ -81,11 +81,14 @@
struct list_head starved_entry;
struct scsi_cmnd *current_cmnd; /* currently active command */
unsigned short queue_depth; /* How deep of a queue we want */
+ unsigned short max_queue_depth; /* max queue depth */
unsigned short last_queue_full_depth; /* These two are used by */
unsigned short last_queue_full_count; /* scsi_track_queue_full() */
- unsigned long last_queue_full_time;/* don't let QUEUE_FULLs on the same
- jiffie count on our counter, they
- could all be from the same event. */
+ unsigned long last_queue_full_time; /* last queue full time */
+ unsigned long queue_ramp_up_period; /* ramp up period in jiffies */
+#define SCSI_DEFAULT_RAMP_UP_PERIOD (120 * HZ)
+
+ unsigned long last_queue_ramp_up; /* last queue ramp up time */
unsigned int id, lun, channel;
@@ -175,6 +178,7 @@
char *model;
};
+typedef void (*activate_complete)(void *, int);
struct scsi_device_handler {
/* Used by the infrastructure */
struct list_head list; /* list of scsi_device_handlers */
@@ -186,7 +190,7 @@
int (*check_sense)(struct scsi_device *, struct scsi_sense_hdr *);
int (*attach)(struct scsi_device *);
void (*detach)(struct scsi_device *);
- int (*activate)(struct scsi_device *);
+ int (*activate)(struct scsi_device *, activate_complete, void *);
int (*prep_fn)(struct scsi_device *, struct request *);
int (*set_params)(struct scsi_device *, const char *);
};
diff --git a/include/scsi/scsi_dh.h b/include/scsi/scsi_dh.h
index ff24074..e3f2db2 100644
--- a/include/scsi/scsi_dh.h
+++ b/include/scsi/scsi_dh.h
@@ -56,14 +56,16 @@
SCSI_DH_DRIVER_MAX,
};
#if defined(CONFIG_SCSI_DH) || defined(CONFIG_SCSI_DH_MODULE)
-extern int scsi_dh_activate(struct request_queue *);
+extern int scsi_dh_activate(struct request_queue *, activate_complete, void *);
extern int scsi_dh_handler_exist(const char *);
extern int scsi_dh_attach(struct request_queue *, const char *);
extern void scsi_dh_detach(struct request_queue *);
extern int scsi_dh_set_params(struct request_queue *, const char *);
#else
-static inline int scsi_dh_activate(struct request_queue *req)
+static inline int scsi_dh_activate(struct request_queue *req,
+ activate_complete fn, void *data)
{
+ fn(data, 0);
return 0;
}
static inline int scsi_dh_handler_exist(const char *name)
diff --git a/include/scsi/scsi_host.h b/include/scsi/scsi_host.h
index 47941fc..c50a97f 100644
--- a/include/scsi/scsi_host.h
+++ b/include/scsi/scsi_host.h
@@ -43,6 +43,12 @@
#define DISABLE_CLUSTERING 0
#define ENABLE_CLUSTERING 1
+enum {
+ SCSI_QDEPTH_DEFAULT, /* default requested change, e.g. from sysfs */
+ SCSI_QDEPTH_QFULL, /* scsi-ml requested due to queue full */
+ SCSI_QDEPTH_RAMP_UP, /* scsi-ml requested due to threshhold event */
+};
+
struct scsi_host_template {
struct module *module;
const char *name;
@@ -294,7 +300,7 @@
*
* Status: OPTIONAL
*/
- int (* change_queue_depth)(struct scsi_device *, int);
+ int (* change_queue_depth)(struct scsi_device *, int, int);
/*
* Fill in this function to allow the changing of tag types
@@ -677,6 +683,12 @@
void *shost_data;
/*
+ * Points to the physical bus device we'd use to do DMA
+ * Needed just in case we have virtual hosts.
+ */
+ struct device *dma_dev;
+
+ /*
* We should ensure that this is aligned, both for better performance
* and also because some compilers (m68k) don't automatically force
* alignment to a long boundary.
@@ -720,7 +732,9 @@
extern void scsi_flush_work(struct Scsi_Host *);
extern struct Scsi_Host *scsi_host_alloc(struct scsi_host_template *, int);
-extern int __must_check scsi_add_host(struct Scsi_Host *, struct device *);
+extern int __must_check scsi_add_host_with_dma(struct Scsi_Host *,
+ struct device *,
+ struct device *);
extern void scsi_scan_host(struct Scsi_Host *);
extern void scsi_rescan_device(struct device *);
extern void scsi_remove_host(struct Scsi_Host *);
@@ -731,6 +745,12 @@
extern u64 scsi_calculate_bounce_limit(struct Scsi_Host *);
+static inline int __must_check scsi_add_host(struct Scsi_Host *host,
+ struct device *dev)
+{
+ return scsi_add_host_with_dma(host, dev, dev);
+}
+
static inline struct device *scsi_get_device(struct Scsi_Host *shost)
{
return shost->shost_gendev.parent;
diff --git a/include/scsi/scsi_transport_fc.h b/include/scsi/scsi_transport_fc.h
index fc50bd6..8e86a94 100644
--- a/include/scsi/scsi_transport_fc.h
+++ b/include/scsi/scsi_transport_fc.h
@@ -807,5 +807,6 @@
struct fc_vport *fc_vport_create(struct Scsi_Host *shost, int channel,
struct fc_vport_identifiers *);
int fc_vport_terminate(struct fc_vport *vport);
+void fc_block_scsi_eh(struct scsi_cmnd *cmnd);
#endif /* SCSI_TRANSPORT_FC_H */
diff --git a/include/sound/ac97_codec.h b/include/sound/ac97_codec.h
index 3dae3f7..4940045 100644
--- a/include/sound/ac97_codec.h
+++ b/include/sound/ac97_codec.h
@@ -593,7 +593,7 @@
struct ac97_quirk {
unsigned short subvendor; /* PCI subsystem vendor id */
- unsigned short subdevice; /* PCI sybsystem device id */
+ unsigned short subdevice; /* PCI subsystem device id */
unsigned short mask; /* device id bit mask, 0 = accept all */
unsigned int codec_id; /* codec id (if any), 0 = accept all */
const char *name; /* name shown as info */
diff --git a/include/sound/wm8993.h b/include/sound/wm8993.h
index 9c661f2..eee19f6 100644
--- a/include/sound/wm8993.h
+++ b/include/sound/wm8993.h
@@ -36,7 +36,7 @@
unsigned int micbias1_lvl:1;
unsigned int micbias2_lvl:1;
- /* Jack detect threashold levels, see datasheet for values */
+ /* Jack detect threshold levels, see datasheet for values */
unsigned int jd_scthr:2;
unsigned int jd_thr:2;
};
diff --git a/include/trace/events/ext4.h b/include/trace/events/ext4.h
index 318f765..d0b6cd3 100644
--- a/include/trace/events/ext4.h
+++ b/include/trace/events/ext4.h
@@ -38,7 +38,7 @@
__entry->blocks = inode->i_blocks;
),
- TP_printk("dev %s ino %lu mode %d uid %u gid %u blocks %llu",
+ TP_printk("dev %s ino %lu mode 0%o uid %u gid %u blocks %llu",
jbd2_dev_to_name(__entry->dev), (unsigned long) __entry->ino,
__entry->mode, __entry->uid, __entry->gid,
(unsigned long long) __entry->blocks)
@@ -61,7 +61,7 @@
__entry->mode = mode;
),
- TP_printk("dev %s dir %lu mode %d",
+ TP_printk("dev %s dir %lu mode 0%o",
jbd2_dev_to_name(__entry->dev), (unsigned long) __entry->dir,
__entry->mode)
);
@@ -85,7 +85,7 @@
__entry->mode = mode;
),
- TP_printk("dev %s ino %lu dir %lu mode %d",
+ TP_printk("dev %s ino %lu dir %lu mode 0%o",
jbd2_dev_to_name(__entry->dev), (unsigned long) __entry->ino,
(unsigned long) __entry->dir, __entry->mode)
);
@@ -305,7 +305,6 @@
__field( int, ret )
__field( int, pages_written )
__field( long, pages_skipped )
- __field( char, encountered_congestion )
__field( char, more_io )
__field( char, no_nrwrite_index_update )
__field( pgoff_t, writeback_index )
@@ -317,17 +316,16 @@
__entry->ret = ret;
__entry->pages_written = pages_written;
__entry->pages_skipped = wbc->pages_skipped;
- __entry->encountered_congestion = wbc->encountered_congestion;
__entry->more_io = wbc->more_io;
__entry->no_nrwrite_index_update = wbc->no_nrwrite_index_update;
__entry->writeback_index = inode->i_mapping->writeback_index;
),
- TP_printk("dev %s ino %lu ret %d pages_written %d pages_skipped %ld congestion %d more_io %d no_nrwrite_index_update %d writeback_index %lu",
+ TP_printk("dev %s ino %lu ret %d pages_written %d pages_skipped %ld more_io %d no_nrwrite_index_update %d writeback_index %lu",
jbd2_dev_to_name(__entry->dev),
(unsigned long) __entry->ino, __entry->ret,
__entry->pages_written, __entry->pages_skipped,
- __entry->encountered_congestion, __entry->more_io,
+ __entry->more_io,
__entry->no_nrwrite_index_update,
(unsigned long) __entry->writeback_index)
);
@@ -591,30 +589,32 @@
TRACE_EVENT(ext4_free_blocks,
TP_PROTO(struct inode *inode, __u64 block, unsigned long count,
- int metadata),
+ int flags),
- TP_ARGS(inode, block, count, metadata),
+ TP_ARGS(inode, block, count, flags),
TP_STRUCT__entry(
__field( dev_t, dev )
__field( ino_t, ino )
+ __field( umode_t, mode )
__field( __u64, block )
__field( unsigned long, count )
- __field( int, metadata )
-
+ __field( int, flags )
),
TP_fast_assign(
__entry->dev = inode->i_sb->s_dev;
__entry->ino = inode->i_ino;
+ __entry->mode = inode->i_mode;
__entry->block = block;
__entry->count = count;
- __entry->metadata = metadata;
+ __entry->flags = flags;
),
- TP_printk("dev %s ino %lu block %llu count %lu metadata %d",
+ TP_printk("dev %s ino %lu mode 0%o block %llu count %lu flags %d",
jbd2_dev_to_name(__entry->dev), (unsigned long) __entry->ino,
- __entry->block, __entry->count, __entry->metadata)
+ __entry->mode, __entry->block, __entry->count,
+ __entry->flags)
);
TRACE_EVENT(ext4_sync_file,
@@ -848,6 +848,32 @@
__entry->result_len, __entry->result_logical)
);
+TRACE_EVENT(ext4_forget,
+ TP_PROTO(struct inode *inode, int is_metadata, __u64 block),
+
+ TP_ARGS(inode, is_metadata, block),
+
+ TP_STRUCT__entry(
+ __field( dev_t, dev )
+ __field( ino_t, ino )
+ __field( umode_t, mode )
+ __field( int, is_metadata )
+ __field( __u64, block )
+ ),
+
+ TP_fast_assign(
+ __entry->dev = inode->i_sb->s_dev;
+ __entry->ino = inode->i_ino;
+ __entry->mode = inode->i_mode;
+ __entry->is_metadata = is_metadata;
+ __entry->block = block;
+ ),
+
+ TP_printk("dev %s ino %lu mode 0%o is_metadata %d block %llu",
+ jbd2_dev_to_name(__entry->dev), (unsigned long) __entry->ino,
+ __entry->mode, __entry->is_metadata, __entry->block)
+);
+
#endif /* _TRACE_EXT4_H */
/* This part must be outside protection */
diff --git a/include/video/sgivw.h b/include/video/sgivw.h
index 55f2a7c..f6aa569 100644
--- a/include/video/sgivw.h
+++ b/include/video/sgivw.h
@@ -351,7 +351,7 @@
struct dbe_timing_info
{
dbe_timing_t type;
- int flags;
+ int flags;
short width; /* Monitor resolution */
short height;
int fields_sec; /* fields/sec (Hz -3 dec. places */
@@ -389,11 +389,11 @@
{
DBE_VT_640_480_60,
/* flags, width, height, fields_sec, cfreq */
- 0, 640, 480, 59940, 25175,
+ 0, 640, 480, 59940, 25175,
/* htotal, hblank_start, hblank_end, hsync_start, hsync_end */
- 800, 640, 800, 656, 752,
+ 800, 640, 800, 656, 752,
/* vtotal, vblank_start, vblank_end, vsync_start, vsync_end */
- 525, 480, 525, 490, 492,
+ 525, 480, 525, 490, 492,
/* pll_m, pll_n, pll_p */
15, 2, 3
},
@@ -650,7 +650,7 @@
/* pll_m, pll_n, pll_p */
6, 1, 0
},
-
+
{
DBE_VT_1920_1200_60,
/* flags, width, height, fields_sec, cfreq */
@@ -676,7 +676,6 @@
}
};
-#define DBE_VT_SIZE (sizeof(dbeVTimings)/sizeof(dbeVTimings[0]))
#endif // INCLUDE_TIMING_TABLE_DATA
#endif // ! __SGIVWFB_H__
diff --git a/ipc/msg.c b/ipc/msg.c
index 2ceab7f..085bd58 100644
--- a/ipc/msg.c
+++ b/ipc/msg.c
@@ -412,7 +412,7 @@
struct msqid_ds __user *buf, int version)
{
struct kern_ipc_perm *ipcp;
- struct msqid64_ds msqid64;
+ struct msqid64_ds uninitialized_var(msqid64);
struct msg_queue *msq;
int err;
diff --git a/kernel/irq/spurious.c b/kernel/irq/spurious.c
index 22b0a6e..e49ea1c 100644
--- a/kernel/irq/spurious.c
+++ b/kernel/irq/spurious.c
@@ -220,7 +220,7 @@
/*
* If we are seeing only the odd spurious IRQ caused by
* bus asynchronicity then don't eventually trigger an error,
- * otherwise the couter becomes a doomsday timer for otherwise
+ * otherwise the counter becomes a doomsday timer for otherwise
* working systems
*/
if (time_after(jiffies, desc->last_unhandled + HZ/10))
diff --git a/kernel/perf_event.c b/kernel/perf_event.c
index 6b7ddba..40a996e 100644
--- a/kernel/perf_event.c
+++ b/kernel/perf_event.c
@@ -476,7 +476,7 @@
if (!task) {
/*
* Per cpu events are removed via an smp call and
- * the removal is always sucessful.
+ * the removal is always successful.
*/
smp_call_function_single(event->cpu,
__perf_event_remove_from_context,
@@ -845,7 +845,7 @@
if (!task) {
/*
* Per cpu events are installed via an smp call and
- * the install is always sucessful.
+ * the install is always successful.
*/
smp_call_function_single(cpu, __perf_install_in_context,
event, 1);
diff --git a/kernel/pm_qos_params.c b/kernel/pm_qos_params.c
index dfdec52..3db49b9 100644
--- a/kernel/pm_qos_params.c
+++ b/kernel/pm_qos_params.c
@@ -29,7 +29,6 @@
#include <linux/pm_qos_params.h>
#include <linux/sched.h>
-#include <linux/smp_lock.h>
#include <linux/spinlock.h>
#include <linux/slab.h>
#include <linux/time.h>
@@ -344,37 +343,33 @@
}
EXPORT_SYMBOL_GPL(pm_qos_remove_notifier);
-#define PID_NAME_LEN sizeof("process_1234567890")
-static char name[PID_NAME_LEN];
+#define PID_NAME_LEN 32
static int pm_qos_power_open(struct inode *inode, struct file *filp)
{
int ret;
long pm_qos_class;
+ char name[PID_NAME_LEN];
- lock_kernel();
pm_qos_class = find_pm_qos_object_by_minor(iminor(inode));
if (pm_qos_class >= 0) {
filp->private_data = (void *)pm_qos_class;
- sprintf(name, "process_%d", current->pid);
+ snprintf(name, PID_NAME_LEN, "process_%d", current->pid);
ret = pm_qos_add_requirement(pm_qos_class, name,
PM_QOS_DEFAULT_VALUE);
- if (ret >= 0) {
- unlock_kernel();
+ if (ret >= 0)
return 0;
- }
}
- unlock_kernel();
-
return -EPERM;
}
static int pm_qos_power_release(struct inode *inode, struct file *filp)
{
int pm_qos_class;
+ char name[PID_NAME_LEN];
pm_qos_class = (long)filp->private_data;
- sprintf(name, "process_%d", current->pid);
+ snprintf(name, PID_NAME_LEN, "process_%d", current->pid);
pm_qos_remove_requirement(pm_qos_class, name);
return 0;
@@ -385,13 +380,14 @@
{
s32 value;
int pm_qos_class;
+ char name[PID_NAME_LEN];
pm_qos_class = (long)filp->private_data;
if (count != sizeof(s32))
return -EINVAL;
if (copy_from_user(&value, buf, sizeof(s32)))
return -EFAULT;
- sprintf(name, "process_%d", current->pid);
+ snprintf(name, PID_NAME_LEN, "process_%d", current->pid);
pm_qos_update_requirement(pm_qos_class, name, value);
return sizeof(s32);
diff --git a/kernel/sys.c b/kernel/sys.c
index 9968c5f..585d6cd 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -8,7 +8,6 @@
#include <linux/mm.h>
#include <linux/utsname.h>
#include <linux/mman.h>
-#include <linux/smp_lock.h>
#include <linux/notifier.h>
#include <linux/reboot.h>
#include <linux/prctl.h>
@@ -349,6 +348,9 @@
machine_power_off();
}
EXPORT_SYMBOL_GPL(kernel_power_off);
+
+static DEFINE_MUTEX(reboot_mutex);
+
/*
* Reboot system call: for obvious reasons only root may call it,
* and even root needs to set up some magic numbers in the registers
@@ -381,7 +383,7 @@
if ((cmd == LINUX_REBOOT_CMD_POWER_OFF) && !pm_power_off)
cmd = LINUX_REBOOT_CMD_HALT;
- lock_kernel();
+ mutex_lock(&reboot_mutex);
switch (cmd) {
case LINUX_REBOOT_CMD_RESTART:
kernel_restart(NULL);
@@ -397,20 +399,18 @@
case LINUX_REBOOT_CMD_HALT:
kernel_halt();
- unlock_kernel();
do_exit(0);
panic("cannot halt");
case LINUX_REBOOT_CMD_POWER_OFF:
kernel_power_off();
- unlock_kernel();
do_exit(0);
break;
case LINUX_REBOOT_CMD_RESTART2:
if (strncpy_from_user(&buffer[0], arg, sizeof(buffer) - 1) < 0) {
- unlock_kernel();
- return -EFAULT;
+ ret = -EFAULT;
+ break;
}
buffer[sizeof(buffer) - 1] = '\0';
@@ -433,7 +433,7 @@
ret = -EINVAL;
break;
}
- unlock_kernel();
+ mutex_unlock(&reboot_mutex);
return ret;
}
diff --git a/kernel/time/clocksource.c b/kernel/time/clocksource.c
index d422c7b..e85c234 100644
--- a/kernel/time/clocksource.c
+++ b/kernel/time/clocksource.c
@@ -677,7 +677,7 @@
* @count: length of buffer
*
* Takes input from sysfs interface for manually overriding the default
- * clocksource selction.
+ * clocksource selection.
*/
static ssize_t sysfs_override_clocksource(struct sys_device *dev,
struct sysdev_attribute *attr,
diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index 67e526b..dee4865 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -68,6 +68,116 @@
#endif
};
+#ifdef CONFIG_DEBUG_OBJECTS_WORK
+
+static struct debug_obj_descr work_debug_descr;
+
+/*
+ * fixup_init is called when:
+ * - an active object is initialized
+ */
+static int work_fixup_init(void *addr, enum debug_obj_state state)
+{
+ struct work_struct *work = addr;
+
+ switch (state) {
+ case ODEBUG_STATE_ACTIVE:
+ cancel_work_sync(work);
+ debug_object_init(work, &work_debug_descr);
+ return 1;
+ default:
+ return 0;
+ }
+}
+
+/*
+ * fixup_activate is called when:
+ * - an active object is activated
+ * - an unknown object is activated (might be a statically initialized object)
+ */
+static int work_fixup_activate(void *addr, enum debug_obj_state state)
+{
+ struct work_struct *work = addr;
+
+ switch (state) {
+
+ case ODEBUG_STATE_NOTAVAILABLE:
+ /*
+ * This is not really a fixup. The work struct was
+ * statically initialized. We just make sure that it
+ * is tracked in the object tracker.
+ */
+ if (test_bit(WORK_STRUCT_STATIC, work_data_bits(work))) {
+ debug_object_init(work, &work_debug_descr);
+ debug_object_activate(work, &work_debug_descr);
+ return 0;
+ }
+ WARN_ON_ONCE(1);
+ return 0;
+
+ case ODEBUG_STATE_ACTIVE:
+ WARN_ON(1);
+
+ default:
+ return 0;
+ }
+}
+
+/*
+ * fixup_free is called when:
+ * - an active object is freed
+ */
+static int work_fixup_free(void *addr, enum debug_obj_state state)
+{
+ struct work_struct *work = addr;
+
+ switch (state) {
+ case ODEBUG_STATE_ACTIVE:
+ cancel_work_sync(work);
+ debug_object_free(work, &work_debug_descr);
+ return 1;
+ default:
+ return 0;
+ }
+}
+
+static struct debug_obj_descr work_debug_descr = {
+ .name = "work_struct",
+ .fixup_init = work_fixup_init,
+ .fixup_activate = work_fixup_activate,
+ .fixup_free = work_fixup_free,
+};
+
+static inline void debug_work_activate(struct work_struct *work)
+{
+ debug_object_activate(work, &work_debug_descr);
+}
+
+static inline void debug_work_deactivate(struct work_struct *work)
+{
+ debug_object_deactivate(work, &work_debug_descr);
+}
+
+void __init_work(struct work_struct *work, int onstack)
+{
+ if (onstack)
+ debug_object_init_on_stack(work, &work_debug_descr);
+ else
+ debug_object_init(work, &work_debug_descr);
+}
+EXPORT_SYMBOL_GPL(__init_work);
+
+void destroy_work_on_stack(struct work_struct *work)
+{
+ debug_object_free(work, &work_debug_descr);
+}
+EXPORT_SYMBOL_GPL(destroy_work_on_stack);
+
+#else
+static inline void debug_work_activate(struct work_struct *work) { }
+static inline void debug_work_deactivate(struct work_struct *work) { }
+#endif
+
/* Serializes the accesses to the list of workqueues. */
static DEFINE_SPINLOCK(workqueue_lock);
static LIST_HEAD(workqueues);
@@ -145,6 +255,7 @@
{
unsigned long flags;
+ debug_work_activate(work);
spin_lock_irqsave(&cwq->lock, flags);
insert_work(cwq, work, &cwq->worklist);
spin_unlock_irqrestore(&cwq->lock, flags);
@@ -280,6 +391,7 @@
struct lockdep_map lockdep_map = work->lockdep_map;
#endif
trace_workqueue_execution(cwq->thread, work);
+ debug_work_deactivate(work);
cwq->current_work = work;
list_del_init(cwq->worklist.next);
spin_unlock_irq(&cwq->lock);
@@ -350,11 +462,18 @@
static void insert_wq_barrier(struct cpu_workqueue_struct *cwq,
struct wq_barrier *barr, struct list_head *head)
{
- INIT_WORK(&barr->work, wq_barrier_func);
+ /*
+ * debugobject calls are safe here even with cwq->lock locked
+ * as we know for sure that this will not trigger any of the
+ * checks and call back into the fixup functions where we
+ * might deadlock.
+ */
+ INIT_WORK_ON_STACK(&barr->work, wq_barrier_func);
__set_bit(WORK_STRUCT_PENDING, work_data_bits(&barr->work));
init_completion(&barr->done);
+ debug_work_activate(&barr->work);
insert_work(cwq, &barr->work, head);
}
@@ -372,8 +491,10 @@
}
spin_unlock_irq(&cwq->lock);
- if (active)
+ if (active) {
wait_for_completion(&barr.done);
+ destroy_work_on_stack(&barr.work);
+ }
return active;
}
@@ -451,6 +572,7 @@
return 0;
wait_for_completion(&barr.done);
+ destroy_work_on_stack(&barr.work);
return 1;
}
EXPORT_SYMBOL_GPL(flush_work);
@@ -485,6 +607,7 @@
*/
smp_rmb();
if (cwq == get_wq_data(work)) {
+ debug_work_deactivate(work);
list_del_init(&work->entry);
ret = 1;
}
@@ -507,8 +630,10 @@
}
spin_unlock_irq(&cwq->lock);
- if (unlikely(running))
+ if (unlikely(running)) {
wait_for_completion(&barr.done);
+ destroy_work_on_stack(&barr.work);
+ }
}
static void wait_on_work(struct work_struct *work)
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 0b8f359..2f22cf4 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -105,7 +105,7 @@
bool "Enable full Section mismatch analysis"
depends on UNDEFINED
# This option is on purpose disabled for now.
- # It will be enabled when we are down to a resonable number
+ # It will be enabled when we are down to a reasonable number
# of section mismatch warnings (< 10 for an allyesconfig build)
help
The section mismatch analysis checks if there are illegal
@@ -298,6 +298,14 @@
timer routines to track the life time of timer objects and
validate the timer operations.
+config DEBUG_OBJECTS_WORK
+ bool "Debug work objects"
+ depends on DEBUG_OBJECTS
+ help
+ If you say Y here, additional code will be inserted into the
+ work queue routines to track the life time of work objects and
+ validate the work operations.
+
config DEBUG_OBJECTS_ENABLE_DEFAULT
int "debug_objects bootup default value (0-1)"
range 0 1
diff --git a/lib/decompress_bunzip2.c b/lib/decompress_bunzip2.c
index 600f473..7607420 100644
--- a/lib/decompress_bunzip2.c
+++ b/lib/decompress_bunzip2.c
@@ -299,7 +299,7 @@
again when using them (during symbol decoding).*/
base = hufGroup->base-1;
limit = hufGroup->limit-1;
- /* Calculate permute[]. Concurently, initialize
+ /* Calculate permute[]. Concurrently, initialize
* temp[] and limit[]. */
pp = 0;
for (i = minLen; i <= maxLen; i++) {
diff --git a/lib/dma-debug.c b/lib/dma-debug.c
index ce6b7ea..d9b08e0 100644
--- a/lib/dma-debug.c
+++ b/lib/dma-debug.c
@@ -259,7 +259,7 @@
* times. Without a hardware IOMMU this results in the
* same device addresses being put into the dma-debug
* hash multiple times too. This can result in false
- * positives being reported. Therfore we implement a
+ * positives being reported. Therefore we implement a
* best-fit algorithm here which returns the entry from
* the hash which fits best to the reference value
* instead of the first-fit.
diff --git a/lib/idr.c b/lib/idr.c
index 80ca9ac..1cac726 100644
--- a/lib/idr.c
+++ b/lib/idr.c
@@ -281,7 +281,7 @@
/**
* idr_get_new_above - allocate new idr entry above or equal to a start id
* @idp: idr handle
- * @ptr: pointer you want associated with the ide
+ * @ptr: pointer you want associated with the id
* @start_id: id to start search at
* @id: pointer to the allocated handle
*
@@ -313,7 +313,7 @@
/**
* idr_get_new - allocate new idr entry
* @idp: idr handle
- * @ptr: pointer you want associated with the ide
+ * @ptr: pointer you want associated with the id
* @id: pointer to the allocated handle
*
* This is the allocate id function. It should be called with any
diff --git a/lib/swiotlb.c b/lib/swiotlb.c
index 795472d..5bc0180 100644
--- a/lib/swiotlb.c
+++ b/lib/swiotlb.c
@@ -485,7 +485,7 @@
/*
* Return the buffer to the free list by setting the corresponding
- * entries to indicate the number of contigous entries available.
+ * entries to indicate the number of contiguous entries available.
* While returning the entries to the free list, we merge the entries
* with slots below and above the pool being returned.
*/
diff --git a/mm/filemap.c b/mm/filemap.c
index ef169f3..c3d3506 100644
--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -1844,7 +1844,7 @@
/*
* Copy as much as we can into the page and return the number of bytes which
- * were sucessfully copied. If a fault is encountered then return the number of
+ * were successfully copied. If a fault is encountered then return the number of
* bytes which were copied.
*/
size_t iov_iter_copy_from_user_atomic(struct page *page,
diff --git a/mm/kmemleak.c b/mm/kmemleak.c
index 8bf765c..13f33b3 100644
--- a/mm/kmemleak.c
+++ b/mm/kmemleak.c
@@ -1050,8 +1050,8 @@
unsigned long flags;
/*
- * Once the object->lock is aquired, the corresponding memory block
- * cannot be freed (the same lock is aquired in delete_object).
+ * Once the object->lock is acquired, the corresponding memory block
+ * cannot be freed (the same lock is acquired in delete_object).
*/
spin_lock_irqsave(&object->lock, flags);
if (object->flags & OBJECT_NO_SCAN)
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index f99f599..c31a310 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -209,7 +209,7 @@
int prev_priority; /* for recording reclaim priority */
/*
- * While reclaiming in a hiearchy, we cache the last child we
+ * While reclaiming in a hierarchy, we cache the last child we
* reclaimed from.
*/
int last_scanned_child;
@@ -1720,7 +1720,7 @@
/*
* While swap-in, try_charge -> commit or cancel, the page is locked.
* And when try_charge() successfully returns, one refcnt to memcg without
- * struct page_cgroup is aquired. This refcnt will be cumsumed by
+ * struct page_cgroup is acquired. This refcnt will be consumed by
* "commit()" or removed by "cancel()"
*/
int mem_cgroup_try_charge_swapin(struct mm_struct *mm,
@@ -2466,7 +2466,7 @@
cgroup_lock();
/*
- * If parent's use_hiearchy is set, we can't make any modifications
+ * If parent's use_hierarchy is set, we can't make any modifications
* in the child subtrees. If it is unset, then the change can
* occur, provided the current cgroup has no children.
*
diff --git a/mm/memory-failure.c b/mm/memory-failure.c
index dacc641..1ac49fe 100644
--- a/mm/memory-failure.c
+++ b/mm/memory-failure.c
@@ -174,7 +174,7 @@
list_for_each_entry_safe (tk, next, to_kill, nd) {
if (doit) {
/*
- * In case something went wrong with munmaping
+ * In case something went wrong with munmapping
* make sure the process doesn't catch the
* signal and then access the memory. Just kill it.
* the signal handlers
diff --git a/mm/truncate.c b/mm/truncate.c
index 450cebd..2c147a7 100644
--- a/mm/truncate.c
+++ b/mm/truncate.c
@@ -490,7 +490,7 @@
* Any pages which are found to be mapped into pagetables are unmapped prior to
* invalidation.
*
- * Returns -EIO if any pages could not be invalidated.
+ * Returns -EBUSY if any pages could not be invalidated.
*/
int invalidate_inode_pages2(struct address_space *mapping)
{
diff --git a/net/bluetooth/bnep/core.c b/net/bluetooth/bnep/core.c
index 29b1b22..ef09c7b 100644
--- a/net/bluetooth/bnep/core.c
+++ b/net/bluetooth/bnep/core.c
@@ -78,7 +78,7 @@
static void __bnep_link_session(struct bnep_session *s)
{
/* It's safe to call __module_get() here because sessions are added
- by the socket layer which has to hold the refference to this module.
+ by the socket layer which has to hold the reference to this module.
*/
__module_get(THIS_MODULE);
list_add(&s->list, &bnep_session_list);
@@ -632,7 +632,7 @@
s = __bnep_get_session(req->dst);
if (s) {
/* Wakeup user-space which is polling for socket errors.
- * This is temporary hack untill we have shutdown in L2CAP */
+ * This is temporary hack until we have shutdown in L2CAP */
s->sock->sk->sk_err = EUNATCH;
/* Kill session thread */
diff --git a/net/ipv4/netfilter/ipt_ECN.c b/net/ipv4/netfilter/ipt_ECN.c
index 549e206..ea5cea2 100644
--- a/net/ipv4/netfilter/ipt_ECN.c
+++ b/net/ipv4/netfilter/ipt_ECN.c
@@ -50,7 +50,7 @@
struct tcphdr _tcph, *tcph;
__be16 oldval;
- /* Not enought header? */
+ /* Not enough header? */
tcph = skb_header_pointer(skb, ip_hdrlen(skb), sizeof(_tcph), &_tcph);
if (!tcph)
return false;
diff --git a/net/irda/irlap.c b/net/irda/irlap.c
index 356e65b..783c5f3 100644
--- a/net/irda/irlap.c
+++ b/net/irda/irlap.c
@@ -450,10 +450,10 @@
/* Check if we are in the right state for disconnecting */
switch (self->state) {
- case LAP_XMIT_P: /* FALLTROUGH */
- case LAP_XMIT_S: /* FALLTROUGH */
- case LAP_CONN: /* FALLTROUGH */
- case LAP_RESET_WAIT: /* FALLTROUGH */
+ case LAP_XMIT_P: /* FALLTHROUGH */
+ case LAP_XMIT_S: /* FALLTHROUGH */
+ case LAP_CONN: /* FALLTHROUGH */
+ case LAP_RESET_WAIT: /* FALLTHROUGH */
case LAP_RESET_CHECK:
irlap_do_event(self, DISCONNECT_REQUEST, NULL, NULL);
break;
@@ -485,9 +485,9 @@
IRDA_DEBUG(1, "%s(), Sending reset request!\n", __func__);
irlap_do_event(self, RESET_REQUEST, NULL, NULL);
break;
- case LAP_NO_RESPONSE: /* FALLTROUGH */
- case LAP_DISC_INDICATION: /* FALLTROUGH */
- case LAP_FOUND_NONE: /* FALLTROUGH */
+ case LAP_NO_RESPONSE: /* FALLTHROUGH */
+ case LAP_DISC_INDICATION: /* FALLTHROUGH */
+ case LAP_FOUND_NONE: /* FALLTHROUGH */
case LAP_MEDIA_BUSY:
irlmp_link_disconnect_indication(self->notify.instance, self,
reason, NULL);
diff --git a/net/irda/irlap_event.c b/net/irda/irlap_event.c
index c5c5195..94a9884 100644
--- a/net/irda/irlap_event.c
+++ b/net/irda/irlap_event.c
@@ -1741,7 +1741,7 @@
* Function irlap_state_xmit_s (event, skb, info)
*
* XMIT_S, The secondary station has been given the right to transmit,
- * and we therefor do not expect to receive any transmissions from other
+ * and we therefore do not expect to receive any transmissions from other
* stations.
*/
static int irlap_state_xmit_s(struct irlap_cb *self, IRLAP_EVENT event,
diff --git a/net/irda/irlmp.c b/net/irda/irlmp.c
index 7bf5b91..0e7d8bd 100644
--- a/net/irda/irlmp.c
+++ b/net/irda/irlmp.c
@@ -105,7 +105,7 @@
init_timer(&irlmp->discovery_timer);
- /* Do discovery every 3 seconds, conditionaly */
+ /* Do discovery every 3 seconds, conditionally */
if (sysctl_discovery)
irlmp_start_discovery_timer(irlmp,
sysctl_discovery_timeout*HZ);
@@ -1842,7 +1842,7 @@
reason = LM_CONNECT_FAILURE;
break;
default:
- IRDA_DEBUG(1, "%s(), Unknow IrLAP disconnect reason %d!\n",
+ IRDA_DEBUG(1, "%s(), Unknown IrLAP disconnect reason %d!\n",
__func__, lap_reason);
reason = LM_LAP_DISCONNECT;
break;
diff --git a/net/mac80211/mesh_pathtbl.c b/net/mac80211/mesh_pathtbl.c
index a8da239..0192cfd 100644
--- a/net/mac80211/mesh_pathtbl.c
+++ b/net/mac80211/mesh_pathtbl.c
@@ -244,7 +244,7 @@
* @addr: destination address of the path (ETH_ALEN length)
* @sdata: local subif
*
- * Returns: 0 on sucess
+ * Returns: 0 on success
*
* State: the initial state of the new path is set to 0
*/
@@ -532,7 +532,7 @@
* @addr: dst address (ETH_ALEN length)
* @sdata: local subif
*
- * Returns: 0 if succesful
+ * Returns: 0 if successful
*/
int mesh_path_del(u8 *addr, struct ieee80211_sub_if_data *sdata)
{
diff --git a/net/netlabel/netlabel_domainhash.c b/net/netlabel/netlabel_domainhash.c
index 7a10bbe..c5d9f97 100644
--- a/net/netlabel/netlabel_domainhash.c
+++ b/net/netlabel/netlabel_domainhash.c
@@ -682,7 +682,7 @@
* buckets and @skip_chain entries. For each entry in the table call
* @callback, if @callback returns a negative value stop 'walking' through the
* table and return. Updates the values in @skip_bkt and @skip_chain on
- * return. Returns zero on succcess, negative values on failure.
+ * return. Returns zero on success, negative values on failure.
*
*/
int netlbl_domhsh_walk(u32 *skip_bkt,
diff --git a/net/sched/act_api.c b/net/sched/act_api.c
index 2a74003..64f5e32 100644
--- a/net/sched/act_api.c
+++ b/net/sched/act_api.c
@@ -598,7 +598,7 @@
goto errout;
/* compat_mode being true specifies a call that is supposed
- * to add additional backward compatiblity statistic TLVs.
+ * to add additional backward compatibility statistic TLVs.
*/
if (compat_mode) {
if (a->type == TCA_OLD_COMPAT)
diff --git a/net/sctp/sm_sideeffect.c b/net/sctp/sm_sideeffect.c
index d771cc1..4e4ca65 100644
--- a/net/sctp/sm_sideeffect.c
+++ b/net/sctp/sm_sideeffect.c
@@ -717,7 +717,7 @@
if (sctp_style(sk, TCP)) {
/* Change the sk->sk_state of a TCP-style socket that has
- * sucessfully completed a connect() call.
+ * successfully completed a connect() call.
*/
if (sctp_state(asoc, ESTABLISHED) && sctp_sstate(sk, CLOSED))
sk->sk_state = SCTP_SS_ESTABLISHED;
diff --git a/net/sctp/sm_statefuns.c b/net/sctp/sm_statefuns.c
index 1ef9de9..47bc20d 100644
--- a/net/sctp/sm_statefuns.c
+++ b/net/sctp/sm_statefuns.c
@@ -3577,7 +3577,7 @@
* To do this properly, we'll set the destination address of the chunk
* and at the transmit time, will try look up the transport to use.
* Since ASCONFs may be bundled, the correct transport may not be
- * created untill we process the entire packet, thus this workaround.
+ * created until we process the entire packet, thus this workaround.
*/
asconf_ack->dest = chunk->source;
sctp_add_cmd_sf(commands, SCTP_CMD_REPLY, SCTP_CHUNK(asconf_ack));
diff --git a/net/sunrpc/xprtrdma/svc_rdma_sendto.c b/net/sunrpc/xprtrdma/svc_rdma_sendto.c
index f11be72..b15e1eb 100644
--- a/net/sunrpc/xprtrdma/svc_rdma_sendto.c
+++ b/net/sunrpc/xprtrdma/svc_rdma_sendto.c
@@ -54,7 +54,7 @@
* Assumptions:
* - head[0] is physically contiguous.
* - tail[0] is physically contiguous.
- * - pages[] is not physically or virtually contigous and consists of
+ * - pages[] is not physically or virtually contiguous and consists of
* PAGE_SIZE elements.
*
* Output:
diff --git a/net/wimax/op-reset.c b/net/wimax/op-reset.c
index ca26917..35f3700 100644
--- a/net/wimax/op-reset.c
+++ b/net/wimax/op-reset.c
@@ -62,7 +62,7 @@
* Called when wanting to reset the device for any reason. Device is
* taken back to power on status.
*
- * This call blocks; on succesful return, the device has completed the
+ * This call blocks; on successful return, the device has completed the
* reset process and is ready to operate.
*/
int wimax_reset(struct wimax_dev *wimax_dev)
diff --git a/samples/Kconfig b/samples/Kconfig
index e4be84a..8924f72 100644
--- a/samples/Kconfig
+++ b/samples/Kconfig
@@ -1,5 +1,3 @@
-# samples/Kconfig
-
menuconfig SAMPLES
bool "Sample kernel code"
help
@@ -47,4 +45,3 @@
This builds kernel hardware breakpoint example modules.
endif # SAMPLES
-
diff --git a/scripts/kconfig/mconf.c b/scripts/kconfig/mconf.c
index d829535..8413cf3 100644
--- a/scripts/kconfig/mconf.c
+++ b/scripts/kconfig/mconf.c
@@ -213,7 +213,7 @@
"to modify that configuration.\n"
"\n"
"If you are uncertain, then you have probably never used alternate\n"
- "configuration files. You should therefor leave this blank to abort.\n"),
+ "configuration files. You should therefore leave this blank to abort.\n"),
save_config_text[] = N_(
"Enter a filename to which this configuration should be saved "
"as an alternate. Leave blank to abort."),
diff --git a/security/selinux/netlabel.c b/security/selinux/netlabel.c
index e688237..2534400 100644
--- a/security/selinux/netlabel.c
+++ b/security/selinux/netlabel.c
@@ -204,7 +204,7 @@
*
* Description
* Call the NetLabel mechanism to set the label of a packet using @sid.
- * Returns zero on auccess, negative values on failure.
+ * Returns zero on success, negative values on failure.
*
*/
int selinux_netlbl_skbuff_setsid(struct sk_buff *skb,
diff --git a/security/selinux/ss/services.c b/security/selinux/ss/services.c
index d6bb20c..b3efae2 100644
--- a/security/selinux/ss/services.c
+++ b/security/selinux/ss/services.c
@@ -836,7 +836,7 @@
goto out;
}
- /* type/domain unchaned */
+ /* type/domain unchanged */
if (old_context->type == new_context->type) {
rc = 0;
goto out;
diff --git a/sound/Kconfig b/sound/Kconfig
index b3e53e6..fcad760 100644
--- a/sound/Kconfig
+++ b/sound/Kconfig
@@ -1,6 +1,3 @@
-# sound/Config.in
-#
-
menuconfig SOUND
tristate "Sound card support"
depends on HAS_IOMEM
@@ -136,4 +133,3 @@
sound subsystem and other function drivers completely unrelated to
sound although they're sharing the AC97 bus. Concerned drivers
should "select" this.
-
diff --git a/sound/isa/cs423x/cs4236.c b/sound/isa/cs423x/cs4236.c
index 93fa672..cc15d1d 100644
--- a/sound/isa/cs423x/cs4236.c
+++ b/sound/isa/cs423x/cs4236.c
@@ -177,7 +177,7 @@
{ .id = "CSC0437", .devs = { { "CSC0000" }, { "CSC0010" }, { "CSC0003" } } },
/* Digital PC 5000 Onboard - CS4236B */
{ .id = "CSC0735", .devs = { { "CSC0000" }, { "CSC0010" } } },
- /* some uknown CS4236B */
+ /* some unknown CS4236B */
{ .id = "CSC0b35", .devs = { { "CSC0000" }, { "CSC0010" }, { "CSC0003" } } },
/* Intel PR440FX Onboard sound */
{ .id = "CSC0b36", .devs = { { "CSC0000" }, { "CSC0010" }, { "CSC0003" } } },
diff --git a/sound/isa/opti9xx/miro.c b/sound/isa/opti9xx/miro.c
index 6123c75..b865e45 100644
--- a/sound/isa/opti9xx/miro.c
+++ b/sound/isa/opti9xx/miro.c
@@ -133,7 +133,7 @@
static struct snd_miro_aci aci_device;
static char * snd_opti9xx_names[] = {
- "unkown",
+ "unknown",
"82C928", "82C929",
"82C924", "82C925",
"82C930", "82C931", "82C933"
diff --git a/sound/isa/opti9xx/opti92x-ad1848.c b/sound/isa/opti9xx/opti92x-ad1848.c
index d08c389..106be6e 100644
--- a/sound/isa/opti9xx/opti92x-ad1848.c
+++ b/sound/isa/opti9xx/opti92x-ad1848.c
@@ -135,6 +135,8 @@
unsigned long mc_base_size;
#ifdef OPTi93X
unsigned long mc_indir_index;
+ unsigned long mc_indir_size;
+ struct resource *res_mc_indir;
struct snd_wss *codec;
#endif /* OPTi93X */
unsigned long pwd_reg;
@@ -177,7 +179,7 @@
#endif
static char * snd_opti9xx_names[] = {
- "unkown",
+ "unknown",
"82C928", "82C929",
"82C924", "82C925",
"82C930", "82C931", "82C933"
@@ -231,7 +233,10 @@
case OPTi9XX_HW_82C931:
case OPTi9XX_HW_82C933:
chip->mc_base = (hardware == OPTi9XX_HW_82C930) ? 0xf8f : 0xf8d;
- chip->mc_indir_index = 0xe0e;
+ if (!chip->mc_indir_index) {
+ chip->mc_indir_index = 0xe0e;
+ chip->mc_indir_size = 2;
+ }
chip->password = 0xe4;
chip->pwd_reg = 0;
break;
@@ -560,6 +565,48 @@
#endif /* OPTi93X */
+static int __devinit snd_opti9xx_read_check(struct snd_opti9xx *chip)
+{
+ unsigned char value;
+#ifdef OPTi93X
+ unsigned long flags;
+#endif
+
+ chip->res_mc_base = request_region(chip->mc_base, chip->mc_base_size,
+ "OPTi9xx MC");
+ if (chip->res_mc_base == NULL)
+ return -EBUSY;
+#ifndef OPTi93X
+ value = snd_opti9xx_read(chip, OPTi9XX_MC_REG(1));
+ if (value != 0xff && value != inb(chip->mc_base + OPTi9XX_MC_REG(1)))
+ if (value == snd_opti9xx_read(chip, OPTi9XX_MC_REG(1)))
+ return 0;
+#else /* OPTi93X */
+ chip->res_mc_indir = request_region(chip->mc_indir_index,
+ chip->mc_indir_size,
+ "OPTi93x MC");
+ if (chip->res_mc_indir == NULL)
+ return -EBUSY;
+
+ spin_lock_irqsave(&chip->lock, flags);
+ outb(chip->password, chip->mc_base + chip->pwd_reg);
+ outb(((chip->mc_indir_index & 0x1f0) >> 4), chip->mc_base);
+ spin_unlock_irqrestore(&chip->lock, flags);
+
+ value = snd_opti9xx_read(chip, OPTi9XX_MC_REG(7));
+ snd_opti9xx_write(chip, OPTi9XX_MC_REG(7), 0xff - value);
+ if (snd_opti9xx_read(chip, OPTi9XX_MC_REG(7)) == 0xff - value)
+ return 0;
+
+ release_and_free_resource(chip->res_mc_indir);
+ chip->res_mc_indir = NULL;
+#endif /* OPTi93X */
+ release_and_free_resource(chip->res_mc_base);
+ chip->res_mc_base = NULL;
+
+ return -ENODEV;
+}
+
static int __devinit snd_card_opti9xx_detect(struct snd_card *card,
struct snd_opti9xx *chip)
{
@@ -567,50 +614,20 @@
#ifndef OPTi93X
for (i = OPTi9XX_HW_82C928; i < OPTi9XX_HW_82C930; i++) {
- unsigned char value;
-
- if ((err = snd_opti9xx_init(chip, i)) < 0)
- return err;
-
- if ((chip->res_mc_base = request_region(chip->mc_base, chip->mc_base_size, "OPTi9xx MC")) == NULL)
- continue;
-
- value = snd_opti9xx_read(chip, OPTi9XX_MC_REG(1));
- if ((value != 0xff) && (value != inb(chip->mc_base + 1)))
- if (value == snd_opti9xx_read(chip, OPTi9XX_MC_REG(1)))
- return 1;
-
- release_and_free_resource(chip->res_mc_base);
- chip->res_mc_base = NULL;
-
- }
-#else /* OPTi93X */
+#else
for (i = OPTi9XX_HW_82C931; i >= OPTi9XX_HW_82C930; i--) {
- unsigned long flags;
- unsigned char value;
-
- if ((err = snd_opti9xx_init(chip, i)) < 0)
+#endif
+ err = snd_opti9xx_init(chip, i);
+ if (err < 0)
return err;
- if ((chip->res_mc_base = request_region(chip->mc_base, chip->mc_base_size, "OPTi9xx MC")) == NULL)
- continue;
-
- spin_lock_irqsave(&chip->lock, flags);
- outb(chip->password, chip->mc_base + chip->pwd_reg);
- outb(((chip->mc_indir_index & (1 << 8)) >> 4) |
- ((chip->mc_indir_index & 0xf0) >> 4), chip->mc_base);
- spin_unlock_irqrestore(&chip->lock, flags);
-
- value = snd_opti9xx_read(chip, OPTi9XX_MC_REG(7));
- snd_opti9xx_write(chip, OPTi9XX_MC_REG(7), 0xff - value);
- if (snd_opti9xx_read(chip, OPTi9XX_MC_REG(7)) == 0xff - value)
+ err = snd_opti9xx_read_check(chip);
+ if (err == 0)
return 1;
-
- release_and_free_resource(chip->res_mc_base);
- chip->res_mc_base = NULL;
+#ifdef OPTi93X
+ chip->mc_indir_index = 0;
+#endif
}
-#endif /* OPTi93X */
-
return -ENODEV;
}
@@ -639,6 +656,8 @@
#ifdef OPTi93X
port = pnp_port_start(pdev, 0) - 4;
fm_port = pnp_port_start(pdev, 1) + 8;
+ chip->mc_indir_index = pnp_port_start(pdev, 3) + 2;
+ chip->mc_indir_size = pnp_port_len(pdev, 3) - 2;
#else
if (pid->driver_data != 0x0924)
port = pnp_port_start(pdev, 1);
@@ -669,7 +688,7 @@
static void snd_card_opti9xx_free(struct snd_card *card)
{
struct snd_opti9xx *chip = card->private_data;
-
+
if (chip) {
#ifdef OPTi93X
struct snd_wss *codec = chip->codec;
@@ -677,6 +696,7 @@
disable_irq(codec->irq);
free_irq(codec->irq, codec);
}
+ release_and_free_resource(chip->res_mc_indir);
#endif
release_and_free_resource(chip->res_mc_base);
}
@@ -696,11 +716,6 @@
struct snd_rawmidi *rmidi;
struct snd_hwdep *synth;
- if (! chip->res_mc_base &&
- (chip->res_mc_base = request_region(chip->mc_base, chip->mc_base_size,
- "OPTi9xx MC")) == NULL)
- return -ENOMEM;
-
#if defined(CS4231) || defined(OPTi93X)
xdma2 = dma2;
#else
@@ -954,6 +969,13 @@
}
if (hw <= OPTi9XX_HW_82C930)
chip->mc_base -= 0x80;
+
+ error = snd_opti9xx_read_check(chip);
+ if (error) {
+ snd_printk(KERN_ERR "OPTI chip not found\n");
+ snd_card_free(card);
+ return error;
+ }
snd_card_set_dev(card, &pcard->card->dev);
if ((error = snd_opti9xx_probe(card)) < 0) {
snd_card_free(card);
diff --git a/sound/oss/Kconfig b/sound/oss/Kconfig
index 135a2b7..a513651 100644
--- a/sound/oss/Kconfig
+++ b/sound/oss/Kconfig
@@ -1,5 +1,3 @@
-# drivers/sound/Config.in
-#
# 18 Apr 1998, Michael Elizabeth Chastain, <mailto:mec@shout.net>
# More hacking for modularisation.
#
diff --git a/sound/oss/dmasound/dmasound_paula.c b/sound/oss/dmasound/dmasound_paula.c
index 06e9e88..bb14e4c 100644
--- a/sound/oss/dmasound/dmasound_paula.c
+++ b/sound/oss/dmasound/dmasound_paula.c
@@ -657,7 +657,7 @@
len += sprintf(buffer+len, "\tsound.volume_right = %d [0...64]\n",
dmasound.volume_right);
if (len >= space) {
- printk(KERN_ERR "dmasound_paula: overlowed state buffer alloc.\n") ;
+ printk(KERN_ERR "dmasound_paula: overflowed state buffer alloc.\n") ;
len = space ;
}
return len;
diff --git a/sound/pci/ca0106/ca0106_proc.c b/sound/pci/ca0106/ca0106_proc.c
index 15523e6..0470461 100644
--- a/sound/pci/ca0106/ca0106_proc.c
+++ b/sound/pci/ca0106/ca0106_proc.c
@@ -233,7 +233,7 @@
snd_iprintf(buffer, "user-defined\n");
break;
default:
- snd_iprintf(buffer, "unkown\n");
+ snd_iprintf(buffer, "unknown\n");
break;
}
snd_iprintf(buffer, "Sample Bits: ");
diff --git a/sound/pci/cs46xx/imgs/cwcdma.asp b/sound/pci/cs46xx/imgs/cwcdma.asp
index 09d24c7..a65e119 100644
--- a/sound/pci/cs46xx/imgs/cwcdma.asp
+++ b/sound/pci/cs46xx/imgs/cwcdma.asp
@@ -26,10 +26,11 @@
//
//
// The purpose of this code is very simple: make it possible to tranfser
-// the samples 'as they are' with no alteration from a PCMreader SCB (DMA from host)
-// to any other SCB. This is useful for AC3 throug SPDIF. SRC (source rate converters)
-// task always alters the samples in some how, however it's from 48khz -> 48khz. The
-// alterations are not audible, but AC3 wont work.
+// the samples 'as they are' with no alteration from a PCMreader
+// SCB (DMA from host) to any other SCB. This is useful for AC3 through SPDIF.
+// SRC (source rate converters) task always alters the samples in somehow,
+// however it's from 48khz -> 48khz.
+// The alterations are not audible, but AC3 wont work.
//
// ...
// |
diff --git a/sound/pci/emu10k1/emu10k1x.c b/sound/pci/emu10k1/emu10k1x.c
index 6b8ae7b..1d369ff 100644
--- a/sound/pci/emu10k1/emu10k1x.c
+++ b/sound/pci/emu10k1/emu10k1x.c
@@ -184,7 +184,7 @@
* The hardware has 3 channels for playback and 1 for capture.
* - channel 0 is the front channel
* - channel 1 is the rear channel
- * - channel 2 is the center/lfe chanel
+ * - channel 2 is the center/lfe channel
* Volume is controlled by the AC97 for the front and rear channels by
* the PCM Playback Volume, Sigmatel Surround Playback Volume and
* Surround Playback Volume. The Sigmatel 4-Speaker Stereo switch affects
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index d822bfc..efcc4f7 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -2450,6 +2450,11 @@
}
}
+ /* disable 64bit DMA address for Teradici */
+ /* it does not work with device 6549:1200 subsys e4a2:040b */
+ if (chip->driver_type == AZX_DRIVER_TERA)
+ gcap &= ~ICH6_GCAP_64OK;
+
/* allow 64bit DMA address if supported by H/W */
if ((gcap & ICH6_GCAP_64OK) && !pci_set_dma_mask(pci, DMA_BIT_MASK(64)))
pci_set_consistent_dma_mask(pci, DMA_BIT_MASK(64));
diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c
index 455a049..447eda1 100644
--- a/sound/pci/hda/patch_analog.c
+++ b/sound/pci/hda/patch_analog.c
@@ -72,7 +72,8 @@
hda_nid_t private_dac_nids[AUTO_CFG_MAX_OUTS];
unsigned int jack_present :1;
- unsigned int inv_jack_detect:1;
+ unsigned int inv_jack_detect:1; /* inverted jack-detection */
+ unsigned int inv_eapd:1; /* inverted EAPD implementation */
#ifdef CONFIG_SND_HDA_POWER_SAVE
struct hda_loopback_check loopback;
@@ -458,7 +459,7 @@
/*
* EAPD control
- * the private value = nid | (invert << 8)
+ * the private value = nid
*/
#define ad198x_eapd_info snd_ctl_boolean_mono_info
@@ -467,8 +468,7 @@
{
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
struct ad198x_spec *spec = codec->spec;
- int invert = (kcontrol->private_value >> 8) & 1;
- if (invert)
+ if (spec->inv_eapd)
ucontrol->value.integer.value[0] = ! spec->cur_eapd;
else
ucontrol->value.integer.value[0] = spec->cur_eapd;
@@ -480,11 +480,10 @@
{
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
struct ad198x_spec *spec = codec->spec;
- int invert = (kcontrol->private_value >> 8) & 1;
hda_nid_t nid = kcontrol->private_value & 0xff;
unsigned int eapd;
eapd = !!ucontrol->value.integer.value[0];
- if (invert)
+ if (spec->inv_eapd)
eapd = !eapd;
if (eapd == spec->cur_eapd)
return 0;
@@ -705,7 +704,7 @@
.info = ad198x_eapd_info,
.get = ad198x_eapd_get,
.put = ad198x_eapd_put,
- .private_value = 0x1b | (1 << 8), /* port-D, inversed */
+ .private_value = 0x1b, /* port-D */
},
{ } /* end */
};
@@ -1074,6 +1073,7 @@
spec->loopback.amplist = ad1986a_loopbacks;
#endif
spec->vmaster_nid = 0x1b;
+ spec->inv_eapd = 1; /* AD1986A has the inverted EAPD implementation */
codec->patch_ops = ad198x_patch_ops;
@@ -2124,7 +2124,7 @@
.info = ad198x_eapd_info,
.get = ad198x_eapd_get,
.put = ad198x_eapd_put,
- .private_value = 0x12 | (1 << 8), /* port-D, inversed */
+ .private_value = 0x12, /* port-D */
},
{ } /* end */
@@ -3065,6 +3065,7 @@
spec->input_mux = &ad1988_laptop_capture_source;
spec->num_mixers = 1;
spec->mixers[0] = ad1988_laptop_mixers;
+ spec->inv_eapd = 1; /* inverted EAPD */
spec->num_init_verbs = 1;
spec->init_verbs[0] = ad1988_laptop_init_verbs;
if (board_config == AD1988_LAPTOP_DIG)
diff --git a/sound/pci/hda/patch_cirrus.c b/sound/pci/hda/patch_cirrus.c
index 2439e84..4b200da 100644
--- a/sound/pci/hda/patch_cirrus.c
+++ b/sound/pci/hda/patch_cirrus.c
@@ -938,7 +938,7 @@
coef |= 0x0500; /* DMIC2 enable 2 channels, disable GPIO1 */
if (is_active_pin(codec, CS_DMIC1_PIN_NID))
coef |= 0x1800; /* DMIC1 enable 2 channels, disable GPIO0
- * No effect if SPDIF_OUT2 is slected in
+ * No effect if SPDIF_OUT2 is selected in
* IDX_SPDIF_CTL.
*/
cs_vendor_coef_set(codec, IDX_ADC_CFG, coef);
diff --git a/sound/pci/hda/patch_cmedia.c b/sound/pci/hda/patch_cmedia.c
index 85c81fe..a45c116 100644
--- a/sound/pci/hda/patch_cmedia.c
+++ b/sound/pci/hda/patch_cmedia.c
@@ -66,7 +66,7 @@
struct hda_pcm pcm_rec[2]; /* PCM information */
- /* pin deafault configuration */
+ /* pin default configuration */
hda_nid_t pin_nid[NUM_PINS];
unsigned int def_conf[NUM_PINS];
unsigned int pin_def_confs;
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index d967836..888b631 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -208,6 +208,7 @@
ALC885_MBP3,
ALC885_MB5,
ALC885_IMAC24,
+ ALC885_IMAC91,
ALC883_3ST_2ch_DIG,
ALC883_3ST_6ch_DIG,
ALC883_3ST_6ch,
@@ -2400,6 +2401,8 @@
"Speaker Playback Switch",
"Mono Playback Switch",
"IEC958 Playback Switch",
+ "Line-Out Playback Switch",
+ "PCM Playback Switch",
NULL,
};
@@ -6618,7 +6621,7 @@
/* Front Mic (0x01) unused */
{ "Line", 0x2 },
/* Line 2 (0x03) unused */
- /* CD (0x04) unsused? */
+ /* CD (0x04) unused? */
},
};
@@ -7050,6 +7053,20 @@
{ } /* end */
};
+static struct snd_kcontrol_new alc885_imac91_mixer[] = {
+ HDA_CODEC_VOLUME("Line-Out Playback Volume", 0x0c, 0x00, HDA_OUTPUT),
+ HDA_BIND_MUTE ("Line-Out Playback Switch", 0x0c, 0x02, HDA_INPUT),
+ HDA_CODEC_MUTE ("Speaker Playback Switch", 0x14, 0x00, HDA_OUTPUT),
+ HDA_CODEC_VOLUME("Speaker Playback Volume", 0x0d, 0x00, HDA_OUTPUT),
+ HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
+ HDA_CODEC_MUTE ("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
+ HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x00, HDA_INPUT),
+ HDA_CODEC_MUTE ("Mic Playback Switch", 0x0b, 0x00, HDA_INPUT),
+ HDA_CODEC_VOLUME("Mic Boost", 0x18, 0x00, HDA_INPUT),
+ { } /* end */
+};
+
+
static struct snd_kcontrol_new alc882_w2jc_mixer[] = {
HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
HDA_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT),
@@ -7505,6 +7522,66 @@
{ }
};
+/* iMac 9,1 */
+static struct hda_verb alc885_imac91_init_verbs[] = {
+ /* Line-Out mixer: unmute input/output amp left and right (volume = 0) */
+ {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+ /* Rear mixer */
+ {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
+ {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+ /* HP Pin: output 0 (0x0c) */
+ {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+ {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x14, AC_VERB_SET_CONNECT_SEL, 0x00},
+ {0x14, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT | AC_USRSP_EN},
+ /* Internal Speakers: output 0 (0x0d) */
+ {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+ {0x15, AC_VERB_SET_CONNECT_SEL, 0x00},
+ /* Mic (rear) pin: input vref at 80% */
+ {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
+ {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+ /* Front Mic pin: input vref at 80% */
+ {0x19, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
+ {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+ /* Line In pin: use output 1 when in LineOut mode */
+ {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+ {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+ {0x1a, AC_VERB_SET_CONNECT_SEL, 0x01},
+
+ /* FIXME: use matrix-type input source selection */
+ /* Mixer elements: 0x18, 19, 1a, 1b, 1c, 1d, 14, 15, 16, 17, 0b */
+ /* Input mixer1: unmute Mic, F-Mic, Line, CD inputs */
+ {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
+ {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
+ {0x24, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
+ /* Input mixer2 */
+ {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
+ {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
+ {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
+ /* Input mixer3 */
+ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
+ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
+ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
+ /* ADC1: mute amp left and right */
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x07, AC_VERB_SET_CONNECT_SEL, 0x00},
+ /* ADC2: mute amp left and right */
+ {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x08, AC_VERB_SET_CONNECT_SEL, 0x00},
+ /* ADC3: mute amp left and right */
+ {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x09, AC_VERB_SET_CONNECT_SEL, 0x00},
+
+ { }
+};
+
/* iMac 24 mixer. */
static struct snd_kcontrol_new alc885_imac24_mixer[] = {
HDA_CODEC_VOLUME("Master Playback Volume", 0x0c, 0x00, HDA_OUTPUT),
@@ -7551,6 +7628,26 @@
spec->autocfg.speaker_pins[0] = 0x14;
}
+static void alc885_imac91_automute(struct hda_codec *codec)
+{
+ unsigned int present;
+
+ present = snd_hda_codec_read(codec, 0x14, 0,
+ AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
+ snd_hda_codec_amp_stereo(codec, 0x15, HDA_OUTPUT, 0,
+ HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0);
+ snd_hda_codec_amp_stereo(codec, 0x1a, HDA_OUTPUT, 0,
+ HDA_AMP_MUTE, present ? HDA_AMP_MUTE : 0);
+
+}
+
+static void alc885_imac91_unsol_event(struct hda_codec *codec,
+ unsigned int res)
+{
+ /* Headphone insertion or removal. */
+ if ((res >> 26) == ALC880_HP_EVENT)
+ alc885_imac91_automute(codec);
+}
static struct hda_verb alc882_targa_verbs[] = {
{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
@@ -8718,6 +8815,7 @@
[ALC885_MB5] = "mb5",
[ALC885_MBP3] = "mbp3",
[ALC885_IMAC24] = "imac24",
+ [ALC885_IMAC91] = "imac91",
[ALC883_3ST_2ch_DIG] = "3stack-2ch-dig",
[ALC883_3ST_6ch_DIG] = "3stack-6ch-dig",
[ALC883_3ST_6ch] = "3stack-6ch",
@@ -8891,6 +8989,7 @@
SND_PCI_QUIRK(0x106b, 0x3600, "Macbook 3,1", ALC889A_MB31),
SND_PCI_QUIRK(0x106b, 0x3800, "MacbookPro 4,1", ALC885_MBP3),
SND_PCI_QUIRK(0x106b, 0x3e00, "iMac 24 Aluminum", ALC885_IMAC24),
+ SND_PCI_QUIRK(0x106b, 0x4900, "iMac 9,1 Aluminum", ALC885_IMAC91),
SND_PCI_QUIRK(0x106b, 0x3f00, "Macbook 5,1", ALC885_MB5),
/* FIXME: HP jack sense seems not working for MBP 5,1 or 5,2,
* so apparently no perfect solution yet
@@ -9002,6 +9101,20 @@
.setup = alc885_imac24_setup,
.init_hook = alc885_imac24_init_hook,
},
+ [ALC885_IMAC91] = {
+ .mixers = { alc885_imac91_mixer, alc882_chmode_mixer },
+ .init_verbs = { alc885_imac91_init_verbs,
+ alc880_gpio1_init_verbs },
+ .num_dacs = ARRAY_SIZE(alc882_dac_nids),
+ .dac_nids = alc882_dac_nids,
+ .channel_mode = alc885_mbp_4ch_modes,
+ .num_channel_mode = ARRAY_SIZE(alc885_mbp_4ch_modes),
+ .input_mux = &alc882_capture_source,
+ .dig_out_nid = ALC882_DIGOUT_NID,
+ .dig_in_nid = ALC882_DIGIN_NID,
+ .unsol_event = alc885_imac91_unsol_event,
+ .init_hook = alc885_imac91_automute,
+ },
[ALC882_TARGA] = {
.mixers = { alc882_targa_mixer, alc882_chmode_mixer },
.init_verbs = { alc882_base_init_verbs, alc882_adc1_init_verbs,
@@ -9908,10 +10021,12 @@
spec->init_amp = ALC_INIT_DEFAULT; /* always initialize */
if (!spec->adc_nids && spec->input_mux) {
- int i;
+ int i, j;
spec->num_adc_nids = 0;
for (i = 0; i < ARRAY_SIZE(alc882_adc_nids); i++) {
+ const struct hda_input_mux *imux = spec->input_mux;
hda_nid_t cap;
+ hda_nid_t items[16];
hda_nid_t nid = alc882_adc_nids[i];
unsigned int wcap = get_wcaps(codec, nid);
/* get type */
@@ -9922,6 +10037,15 @@
err = snd_hda_get_connections(codec, nid, &cap, 1);
if (err < 0)
continue;
+ err = snd_hda_get_connections(codec, cap, items,
+ ARRAY_SIZE(items));
+ if (err < 0)
+ continue;
+ for (j = 0; j < imux->num_items; j++)
+ if (imux->items[j].index >= err)
+ break;
+ if (j < imux->num_items)
+ continue;
spec->private_capsrc_nids[spec->num_adc_nids] = cap;
spec->num_adc_nids++;
}
@@ -16846,6 +16970,7 @@
ALC662_3ST_6ch_DIG),
SND_PCI_QUIRK_MASK(0x1854, 0xf000, 0x2000, "ASUS H13-200x",
ALC663_ASUS_H13),
+ SND_PCI_QUIRK(0x8086, 0xd604, "Intel mobo", ALC662_3ST_2ch_DIG),
{}
};
diff --git a/sound/pci/ice1712/aureon.c b/sound/pci/ice1712/aureon.c
index 110d16e..765d7bd 100644
--- a/sound/pci/ice1712/aureon.c
+++ b/sound/pci/ice1712/aureon.c
@@ -689,32 +689,14 @@
return change;
}
-static const DECLARE_TLV_DB_SCALE(db_scale_wm_dac, -12700, 100, 1);
+static const DECLARE_TLV_DB_SCALE(db_scale_wm_dac, -10000, 100, 1);
static const DECLARE_TLV_DB_SCALE(db_scale_wm_pcm, -6400, 50, 1);
static const DECLARE_TLV_DB_SCALE(db_scale_wm_adc, -1200, 100, 0);
static const DECLARE_TLV_DB_SCALE(db_scale_ac97_master, -4650, 150, 0);
static const DECLARE_TLV_DB_SCALE(db_scale_ac97_gain, -3450, 150, 0);
-/*
- * Logarithmic volume values for WM8770
- * Computed as 20 * Log10(255 / x)
- */
-static const unsigned char wm_vol[256] = {
- 127, 48, 42, 39, 36, 34, 33, 31, 30, 29, 28, 27, 27, 26, 25, 25, 24, 24, 23,
- 23, 22, 22, 21, 21, 21, 20, 20, 20, 19, 19, 19, 18, 18, 18, 18, 17, 17, 17,
- 17, 16, 16, 16, 16, 15, 15, 15, 15, 15, 15, 14, 14, 14, 14, 14, 13, 13, 13,
- 13, 13, 13, 13, 12, 12, 12, 12, 12, 12, 12, 11, 11, 11, 11, 11, 11, 11, 11,
- 11, 10, 10, 10, 10, 10, 10, 10, 10, 10, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 8, 8,
- 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 6, 6, 6,
- 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5,
- 5, 5, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 3, 3, 3, 3, 3,
- 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0
-};
-
-#define WM_VOL_MAX (sizeof(wm_vol) - 1)
+#define WM_VOL_MAX 100
+#define WM_VOL_CNT 101 /* 0dB .. -100dB */
#define WM_VOL_MUTE 0x8000
static void wm_set_vol(struct snd_ice1712 *ice, unsigned int index, unsigned short vol, unsigned short master)
@@ -724,7 +706,8 @@
if ((master & WM_VOL_MUTE) || (vol & WM_VOL_MUTE))
nvol = 0;
else
- nvol = 127 - wm_vol[(((vol & ~WM_VOL_MUTE) * (master & ~WM_VOL_MUTE)) / 127) & WM_VOL_MAX];
+ nvol = ((vol % WM_VOL_CNT) * (master % WM_VOL_CNT)) /
+ WM_VOL_MAX;
wm_put(ice, index, nvol);
wm_put_nocache(ice, index, 0x180 | nvol);
@@ -820,7 +803,7 @@
uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
uinfo->count = voices;
uinfo->value.integer.min = 0; /* mute (-101dB) */
- uinfo->value.integer.max = 0x7F; /* 0dB */
+ uinfo->value.integer.max = WM_VOL_MAX; /* 0dB */
return 0;
}
@@ -850,7 +833,7 @@
snd_ice1712_save_gpio_status(ice);
for (i = 0; i < voices; i++) {
unsigned int vol = ucontrol->value.integer.value[i];
- if (vol > 0x7f)
+ if (vol > WM_VOL_MAX)
continue;
vol |= spec->vol[ofs+i];
if (vol != spec->vol[ofs+i]) {
diff --git a/sound/pci/ice1712/juli.c b/sound/pci/ice1712/juli.c
index 0c9413d..98bc3b7 100644
--- a/sound/pci/ice1712/juli.c
+++ b/sound/pci/ice1712/juli.c
@@ -380,7 +380,7 @@
* inputs) are fed from Xilinx.
*
* I even checked traces on board and coded a support in driver for
- * an alternative possiblity - the unused I2S ICE output channels
+ * an alternative possibility - the unused I2S ICE output channels
* switched to HW-IN/SPDIF-IN and providing the monitoring signal to
* the DAC - to no avail. The I2S outputs seem to be unconnected.
*
diff --git a/sound/pci/rme9652/hdspm.c b/sound/pci/rme9652/hdspm.c
index 0dce331..a1b10d1 100644
--- a/sound/pci/rme9652/hdspm.c
+++ b/sound/pci/rme9652/hdspm.c
@@ -3017,7 +3017,7 @@
insel = "Coaxial";
break;
default:
- insel = "Unkown";
+ insel = "Unknown";
}
switch (hdspm->control_register & HDSPM_SyncRefMask) {
@@ -3028,7 +3028,7 @@
syncref = "MADI";
break;
default:
- syncref = "Unkown";
+ syncref = "Unknown";
}
snd_iprintf(buffer, "Inputsel = %s, SyncRef = %s\n", insel,
syncref);
diff --git a/sound/soc/codecs/uda134x.c b/sound/soc/codecs/uda134x.c
index aa40d98..3e99fe5 100644
--- a/sound/soc/codecs/uda134x.c
+++ b/sound/soc/codecs/uda134x.c
@@ -101,7 +101,7 @@
pr_debug("%s reg: %02X, value:%02X\n", __func__, reg, value);
if (reg >= UDA134X_REGS_NUM) {
- printk(KERN_ERR "%s unkown register: reg: %u",
+ printk(KERN_ERR "%s unknown register: reg: %u",
__func__, reg);
return -EINVAL;
}
@@ -552,7 +552,7 @@
ARRAY_SIZE(uda1341_snd_controls));
break;
default:
- printk(KERN_ERR "%s unkown codec type: %d",
+ printk(KERN_ERR "%s unknown codec type: %d",
__func__, pd->model);
return -EINVAL;
}
diff --git a/sound/soc/codecs/wm8903.c b/sound/soc/codecs/wm8903.c
index b8cae17..ce5515e 100644
--- a/sound/soc/codecs/wm8903.c
+++ b/sound/soc/codecs/wm8903.c
@@ -607,7 +607,7 @@
SOC_SINGLE("DRC Switch", WM8903_DRC_0, 15, 1, 0),
SOC_ENUM("DRC Compressor Slope R0", drc_slope_r0),
SOC_ENUM("DRC Compressor Slope R1", drc_slope_r1),
-SOC_SINGLE_TLV("DRC Compressor Threashold Volume", WM8903_DRC_3, 5, 124, 1,
+SOC_SINGLE_TLV("DRC Compressor Threshold Volume", WM8903_DRC_3, 5, 124, 1,
drc_tlv_thresh),
SOC_SINGLE_TLV("DRC Volume", WM8903_DRC_3, 0, 30, 1, drc_tlv_amp),
SOC_SINGLE_TLV("DRC Minimum Gain Volume", WM8903_DRC_1, 2, 3, 1, drc_tlv_min),
@@ -617,11 +617,11 @@
SOC_ENUM("DRC FF Delay", drc_ff_delay),
SOC_SINGLE("DRC Anticlip Switch", WM8903_DRC_0, 1, 1, 0),
SOC_SINGLE("DRC QR Switch", WM8903_DRC_0, 2, 1, 0),
-SOC_SINGLE_TLV("DRC QR Threashold Volume", WM8903_DRC_0, 6, 3, 0, drc_tlv_max),
+SOC_SINGLE_TLV("DRC QR Threshold Volume", WM8903_DRC_0, 6, 3, 0, drc_tlv_max),
SOC_ENUM("DRC QR Decay Rate", drc_qr_decay),
SOC_SINGLE("DRC Smoothing Switch", WM8903_DRC_0, 3, 1, 0),
SOC_SINGLE("DRC Smoothing Hysteresis Switch", WM8903_DRC_0, 0, 1, 0),
-SOC_ENUM("DRC Smoothing Threashold", drc_smoothing),
+SOC_ENUM("DRC Smoothing Threshold", drc_smoothing),
SOC_SINGLE_TLV("DRC Startup Volume", WM8903_DRC_0, 6, 18, 0, drc_tlv_startup),
SOC_DOUBLE_R_TLV("Digital Capture Volume", WM8903_ADC_DIGITAL_VOLUME_LEFT,
diff --git a/sound/soc/codecs/wm8993.c b/sound/soc/codecs/wm8993.c
index 5e32f2e..2981afa 100644
--- a/sound/soc/codecs/wm8993.c
+++ b/sound/soc/codecs/wm8993.c
@@ -689,7 +689,7 @@
SOC_SINGLE("DRC Switch", WM8993_DRC_CONTROL_1, 15, 1, 0),
SOC_ENUM("DRC Path", drc_path),
-SOC_SINGLE_TLV("DRC Compressor Threashold Volume", WM8993_DRC_CONTROL_2,
+SOC_SINGLE_TLV("DRC Compressor Threshold Volume", WM8993_DRC_CONTROL_2,
2, 60, 1, drc_comp_threash),
SOC_SINGLE_TLV("DRC Compressor Amplitude Volume", WM8993_DRC_CONTROL_3,
11, 30, 1, drc_comp_amp),
@@ -709,7 +709,7 @@
SOC_ENUM("DRC Quick Release Rate", drc_qr_rate),
SOC_SINGLE("DRC Smoothing Switch", WM8993_DRC_CONTROL_1, 11, 1, 0),
SOC_SINGLE("DRC Smoothing Hysteresis Switch", WM8993_DRC_CONTROL_1, 8, 1, 0),
-SOC_ENUM("DRC Smoothing Hysteresis Threashold", drc_smooth),
+SOC_ENUM("DRC Smoothing Hysteresis Threshold", drc_smooth),
SOC_SINGLE_TLV("DRC Startup Volume", WM8993_DRC_CONTROL_4, 8, 18, 0,
drc_startup_tlv),
diff --git a/sound/soc/imx/mx1_mx2-pcm.c b/sound/soc/imx/mx1_mx2-pcm.c
index b838665..bffffcd 100644
--- a/sound/soc/imx/mx1_mx2-pcm.c
+++ b/sound/soc/imx/mx1_mx2-pcm.c
@@ -322,12 +322,12 @@
pr_debug("%s: Requesting dma channel (%s)\n", __func__,
prtd->dma_params->name);
- prtd->dma_ch = imx_dma_request_by_prio(prtd->dma_params->name,
- DMA_PRIO_HIGH);
- if (prtd->dma_ch < 0) {
+ ret = imx_dma_request_by_prio(prtd->dma_params->name, DMA_PRIO_HIGH);
+ if (ret < 0) {
printk(KERN_ERR "Error %d requesting dma channel\n", ret);
return ret;
}
+ prtd->dma_ch = ret;
imx_dma_config_burstlen(prtd->dma_ch,
prtd->dma_params->watermark_level);
diff --git a/sound/soc/s3c24xx/s3c24xx_simtec.c b/sound/soc/s3c24xx/s3c24xx_simtec.c
index 507b2ed..d441c3b 100644
--- a/sound/soc/s3c24xx/s3c24xx_simtec.c
+++ b/sound/soc/s3c24xx/s3c24xx_simtec.c
@@ -270,7 +270,7 @@
gpio_direction_output(pd->amp_gain[1], 0);
}
- /* note, curently we assume GPA0 isn't valid amp */
+ /* note, currently we assume GPA0 isn't valid amp */
if (pdata->amp_gpio > 0) {
ret = gpio_request(pd->amp_gpio, "gpio-amp");
if (ret) {
diff --git a/sound/soc/s6000/s6000-pcm.c b/sound/soc/s6000/s6000-pcm.c
index 0eb1722..1d61109 100644
--- a/sound/soc/s6000/s6000-pcm.c
+++ b/sound/soc/s6000/s6000-pcm.c
@@ -196,7 +196,7 @@
0 /* destination skip after chunk (impossible) */,
4 /* 16 byte burst size */,
-1 /* don't conserve bandwidth */,
- 0 /* low watermark irq descriptor theshold */,
+ 0 /* low watermark irq descriptor threshold */,
0 /* disable hardware timestamps */,
1 /* enable channel */);
diff --git a/sound/sound_core.c b/sound/sound_core.c
index 49c9981..dbca7c9 100644
--- a/sound/sound_core.c
+++ b/sound/sound_core.c
@@ -353,7 +353,7 @@
* @dev: device pointer
*
* Allocate a special sound device by minor number from the sound
- * subsystem. The allocated number is returned on succes. On failure
+ * subsystem. The allocated number is returned on success. On failure
* a negative error code is returned.
*/
diff --git a/sound/synth/emux/soundfont.c b/sound/synth/emux/soundfont.c
index 63c8f45..67c9123 100644
--- a/sound/synth/emux/soundfont.c
+++ b/sound/synth/emux/soundfont.c
@@ -374,7 +374,7 @@
/*
- * increment sample couter
+ * increment sample counter
*/
static void
set_sample_counter(struct snd_sf_list *sflist, struct snd_soundfont *sf,
diff --git a/sound/usb/usx2y/us122l.c b/sound/usb/usx2y/us122l.c
index f71cd28..91bb296 100644
--- a/sound/usb/usx2y/us122l.c
+++ b/sound/usb/usx2y/us122l.c
@@ -194,7 +194,8 @@
if (!us122l->first)
us122l->first = file;
- if (us122l->dev->descriptor.idProduct == USB_ID_US144) {
+ if (us122l->dev->descriptor.idProduct == USB_ID_US144 ||
+ us122l->dev->descriptor.idProduct == USB_ID_US144MKII) {
iface = usb_ifnum_to_if(us122l->dev, 0);
usb_autopm_get_interface(iface);
}
@@ -209,7 +210,8 @@
struct usb_interface *iface;
snd_printdd(KERN_DEBUG "%p %p\n", hw, file);
- if (us122l->dev->descriptor.idProduct == USB_ID_US144) {
+ if (us122l->dev->descriptor.idProduct == USB_ID_US144 ||
+ us122l->dev->descriptor.idProduct == USB_ID_US144MKII) {
iface = usb_ifnum_to_if(us122l->dev, 0);
usb_autopm_put_interface(iface);
}
@@ -476,7 +478,8 @@
int err;
struct us122l *us122l = US122L(card);
- if (us122l->dev->descriptor.idProduct == USB_ID_US144) {
+ if (us122l->dev->descriptor.idProduct == USB_ID_US144 ||
+ us122l->dev->descriptor.idProduct == USB_ID_US144MKII) {
err = usb_set_interface(us122l->dev, 0, 1);
if (err) {
snd_printk(KERN_ERR "usb_set_interface error \n");
@@ -495,7 +498,8 @@
if (!us122l_start(us122l, 44100, 256))
return false;
- if (us122l->dev->descriptor.idProduct == USB_ID_US144)
+ if (us122l->dev->descriptor.idProduct == USB_ID_US144 ||
+ us122l->dev->descriptor.idProduct == USB_ID_US144MKII)
err = us144_create_usbmidi(card);
else
err = us122l_create_usbmidi(card);
@@ -597,7 +601,8 @@
struct snd_card *card;
int err;
- if (device->descriptor.idProduct == USB_ID_US144
+ if ((device->descriptor.idProduct == USB_ID_US144 ||
+ device->descriptor.idProduct == USB_ID_US144MKII)
&& device->speed == USB_SPEED_HIGH) {
snd_printk(KERN_ERR "disable ehci-hcd to run US-144 \n");
return -ENODEV;
@@ -692,7 +697,8 @@
mutex_lock(&us122l->mutex);
/* needed, doesn't restart without: */
- if (us122l->dev->descriptor.idProduct == USB_ID_US144) {
+ if (us122l->dev->descriptor.idProduct == USB_ID_US144 ||
+ us122l->dev->descriptor.idProduct == USB_ID_US144MKII) {
err = usb_set_interface(us122l->dev, 0, 1);
if (err) {
snd_printk(KERN_ERR "usb_set_interface error \n");
@@ -737,6 +743,16 @@
.idVendor = 0x0644,
.idProduct = USB_ID_US144
},
+ {
+ .match_flags = USB_DEVICE_ID_MATCH_DEVICE,
+ .idVendor = 0x0644,
+ .idProduct = USB_ID_US122MKII
+ },
+ {
+ .match_flags = USB_DEVICE_ID_MATCH_DEVICE,
+ .idVendor = 0x0644,
+ .idProduct = USB_ID_US144MKII
+ },
{ /* terminator */ }
};
diff --git a/sound/usb/usx2y/us122l.h b/sound/usb/usx2y/us122l.h
index 4daf198..f263b3f 100644
--- a/sound/usb/usx2y/us122l.h
+++ b/sound/usb/usx2y/us122l.h
@@ -25,5 +25,7 @@
#define USB_ID_US122L 0x800E
#define USB_ID_US144 0x800F
+#define USB_ID_US122MKII 0x8021
+#define USB_ID_US144MKII 0x8020
#endif