| #include <linux/types.h> |
| #include <linux/mm.h> |
| #include <linux/slab.h> |
| #include <linux/blkdev.h> |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| |
| #include <asm/setup.h> |
| #include <asm/page.h> |
| #include <asm/pgtable.h> |
| #include <asm/amigaints.h> |
| #include <asm/amigahw.h> |
| #include <linux/zorro.h> |
| #include <asm/irq.h> |
| #include <linux/spinlock.h> |
| |
| #include "scsi.h" |
| #include <scsi/scsi_host.h> |
| #include "wd33c93.h" |
| #include "a2091.h" |
| |
| #include <linux/stat.h> |
| |
| |
| static int a2091_release(struct Scsi_Host *instance); |
| |
| static irqreturn_t a2091_intr(int irq, void *data) |
| { |
| struct Scsi_Host *instance = data; |
| a2091_scsiregs *regs = (a2091_scsiregs *)(instance->base); |
| unsigned int status = regs->ISTR; |
| unsigned long flags; |
| |
| if (!(status & (ISTR_INT_F | ISTR_INT_P)) || !(status & ISTR_INTS)) |
| return IRQ_NONE; |
| |
| spin_lock_irqsave(instance->host_lock, flags); |
| wd33c93_intr(instance); |
| spin_unlock_irqrestore(instance->host_lock, flags); |
| return IRQ_HANDLED; |
| } |
| |
| static int dma_setup(struct scsi_cmnd *cmd, int dir_in) |
| { |
| struct Scsi_Host *instance = cmd->device->host; |
| struct WD33C93_hostdata *hdata = shost_priv(instance); |
| a2091_scsiregs *regs = (a2091_scsiregs *)(instance->base); |
| unsigned short cntr = CNTR_PDMD | CNTR_INTEN; |
| unsigned long addr = virt_to_bus(cmd->SCp.ptr); |
| |
| /* don't allow DMA if the physical address is bad */ |
| if (addr & A2091_XFER_MASK) { |
| hdata->dma_bounce_len = (cmd->SCp.this_residual + 511) & ~0x1ff; |
| hdata->dma_bounce_buffer = kmalloc(hdata->dma_bounce_len, |
| GFP_KERNEL); |
| |
| /* can't allocate memory; use PIO */ |
| if (!hdata->dma_bounce_buffer) { |
| hdata->dma_bounce_len = 0; |
| return 1; |
| } |
| |
| /* get the physical address of the bounce buffer */ |
| addr = virt_to_bus(hdata->dma_bounce_buffer); |
| |
| /* the bounce buffer may not be in the first 16M of physmem */ |
| if (addr & A2091_XFER_MASK) { |
| /* we could use chipmem... maybe later */ |
| kfree(hdata->dma_bounce_buffer); |
| hdata->dma_bounce_buffer = NULL; |
| hdata->dma_bounce_len = 0; |
| return 1; |
| } |
| |
| if (!dir_in) { |
| /* copy to bounce buffer for a write */ |
| memcpy(hdata->dma_bounce_buffer, cmd->SCp.ptr, |
| cmd->SCp.this_residual); |
| } |
| } |
| |
| /* setup dma direction */ |
| if (!dir_in) |
| cntr |= CNTR_DDIR; |
| |
| /* remember direction */ |
| hdata->dma_dir = dir_in; |
| |
| regs->CNTR = cntr; |
| |
| /* setup DMA *physical* address */ |
| regs->ACR = addr; |
| |
| if (dir_in) { |
| /* invalidate any cache */ |
| cache_clear(addr, cmd->SCp.this_residual); |
| } else { |
| /* push any dirty cache */ |
| cache_push(addr, cmd->SCp.this_residual); |
| } |
| /* start DMA */ |
| regs->ST_DMA = 1; |
| |
| /* return success */ |
| return 0; |
| } |
| |
| static void dma_stop(struct Scsi_Host *instance, struct scsi_cmnd *SCpnt, |
| int status) |
| { |
| struct WD33C93_hostdata *hdata = shost_priv(instance); |
| a2091_scsiregs *regs = (a2091_scsiregs *)(instance->base); |
| |
| /* disable SCSI interrupts */ |
| unsigned short cntr = CNTR_PDMD; |
| |
| if (!hdata->dma_dir) |
| cntr |= CNTR_DDIR; |
| |
| /* disable SCSI interrupts */ |
| regs->CNTR = cntr; |
| |
| /* flush if we were reading */ |
| if (hdata->dma_dir) { |
| regs->FLUSH = 1; |
| while (!(regs->ISTR & ISTR_FE_FLG)) |
| ; |
| } |
| |
| /* clear a possible interrupt */ |
| regs->CINT = 1; |
| |
| /* stop DMA */ |
| regs->SP_DMA = 1; |
| |
| /* restore the CONTROL bits (minus the direction flag) */ |
| regs->CNTR = CNTR_PDMD | CNTR_INTEN; |
| |
| /* copy from a bounce buffer, if necessary */ |
| if (status && hdata->dma_bounce_buffer) { |
| if (hdata->dma_dir) |
| memcpy(SCpnt->SCp.ptr, hdata->dma_bounce_buffer, |
| SCpnt->SCp.this_residual); |
| kfree(hdata->dma_bounce_buffer); |
| hdata->dma_bounce_buffer = NULL; |
| hdata->dma_bounce_len = 0; |
| } |
| } |
| |
| static int __init a2091_detect(struct scsi_host_template *tpnt) |
| { |
| static unsigned char called = 0; |
| struct Scsi_Host *instance; |
| unsigned long address; |
| struct zorro_dev *z = NULL; |
| wd33c93_regs wdregs; |
| a2091_scsiregs *regs; |
| struct WD33C93_hostdata *hdata; |
| int num_a2091 = 0; |
| |
| if (!MACH_IS_AMIGA || called) |
| return 0; |
| called = 1; |
| |
| tpnt->proc_name = "A2091"; |
| tpnt->proc_info = &wd33c93_proc_info; |
| |
| while ((z = zorro_find_device(ZORRO_WILDCARD, z))) { |
| if (z->id != ZORRO_PROD_CBM_A590_A2091_1 && |
| z->id != ZORRO_PROD_CBM_A590_A2091_2) |
| continue; |
| address = z->resource.start; |
| if (!request_mem_region(address, 256, "wd33c93")) |
| continue; |
| |
| instance = scsi_register(tpnt, sizeof(struct WD33C93_hostdata)); |
| if (instance == NULL) |
| goto release; |
| instance->base = ZTWO_VADDR(address); |
| instance->irq = IRQ_AMIGA_PORTS; |
| instance->unique_id = z->slotaddr; |
| regs = (a2091_scsiregs *)(instance->base); |
| regs->DAWR = DAWR_A2091; |
| wdregs.SASR = ®s->SASR; |
| wdregs.SCMD = ®s->SCMD; |
| hdata = shost_priv(instance); |
| hdata->no_sync = 0xff; |
| hdata->fast = 0; |
| hdata->dma_mode = CTRL_DMA; |
| wd33c93_init(instance, wdregs, dma_setup, dma_stop, |
| WD33C93_FS_8_10); |
| if (request_irq(IRQ_AMIGA_PORTS, a2091_intr, IRQF_SHARED, |
| "A2091 SCSI", instance)) |
| goto unregister; |
| regs->CNTR = CNTR_PDMD | CNTR_INTEN; |
| num_a2091++; |
| continue; |
| |
| unregister: |
| scsi_unregister(instance); |
| release: |
| release_mem_region(address, 256); |
| } |
| |
| return num_a2091; |
| } |
| |
| static int a2091_bus_reset(struct scsi_cmnd *cmd) |
| { |
| /* FIXME perform bus-specific reset */ |
| |
| /* FIXME 2: kill this function, and let midlayer fall back |
| to the same action, calling wd33c93_host_reset() */ |
| |
| spin_lock_irq(cmd->device->host->host_lock); |
| wd33c93_host_reset(cmd); |
| spin_unlock_irq(cmd->device->host->host_lock); |
| |
| return SUCCESS; |
| } |
| |
| #define HOSTS_C |
| |
| static struct scsi_host_template driver_template = { |
| .proc_name = "A2901", |
| .name = "Commodore A2091/A590 SCSI", |
| .detect = a2091_detect, |
| .release = a2091_release, |
| .queuecommand = wd33c93_queuecommand, |
| .eh_abort_handler = wd33c93_abort, |
| .eh_bus_reset_handler = a2091_bus_reset, |
| .eh_host_reset_handler = wd33c93_host_reset, |
| .can_queue = CAN_QUEUE, |
| .this_id = 7, |
| .sg_tablesize = SG_ALL, |
| .cmd_per_lun = CMD_PER_LUN, |
| .use_clustering = DISABLE_CLUSTERING |
| }; |
| |
| |
| #include "scsi_module.c" |
| |
| static int a2091_release(struct Scsi_Host *instance) |
| { |
| #ifdef MODULE |
| a2091_scsiregs *regs = (a2091_scsiregs *)(instance->base); |
| |
| regs->CNTR = 0; |
| release_mem_region(ZTWO_PADDR(instance->base), 256); |
| free_irq(IRQ_AMIGA_PORTS, instance); |
| #endif |
| return 1; |
| } |
| |
| MODULE_LICENSE("GPL"); |