| /* |
| * arch/v850/kernel/process.c -- Arch-dependent process handling |
| * |
| * Copyright (C) 2001,02,03 NEC Electronics Corporation |
| * Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org> |
| * |
| * This file is subject to the terms and conditions of the GNU General |
| * Public License. See the file COPYING in the main directory of this |
| * archive for more details. |
| * |
| * Written by Miles Bader <miles@gnu.org> |
| */ |
| |
| #include <linux/config.h> |
| #include <linux/errno.h> |
| #include <linux/sched.h> |
| #include <linux/kernel.h> |
| #include <linux/mm.h> |
| #include <linux/smp.h> |
| #include <linux/smp_lock.h> |
| #include <linux/stddef.h> |
| #include <linux/unistd.h> |
| #include <linux/ptrace.h> |
| #include <linux/slab.h> |
| #include <linux/user.h> |
| #include <linux/a.out.h> |
| #include <linux/reboot.h> |
| |
| #include <asm/uaccess.h> |
| #include <asm/system.h> |
| #include <asm/pgtable.h> |
| |
| extern void ret_from_fork (void); |
| |
| |
| /* The idle loop. */ |
| void default_idle (void) |
| { |
| while (1) { |
| while (! need_resched ()) |
| asm ("halt; nop; nop; nop; nop; nop" ::: "cc"); |
| schedule (); |
| } |
| } |
| |
| void (*idle)(void) = default_idle; |
| |
| /* |
| * The idle thread. There's no useful work to be |
| * done, so just try to conserve power and have a |
| * low exit latency (ie sit in a loop waiting for |
| * somebody to say that they'd like to reschedule) |
| */ |
| void cpu_idle (void) |
| { |
| /* endless idle loop with no priority at all */ |
| (*idle) (); |
| } |
| |
| /* |
| * This is the mechanism for creating a new kernel thread. |
| * |
| * NOTE! Only a kernel-only process (ie the swapper or direct descendants who |
| * haven't done an "execve()") should use this: it will work within a system |
| * call from a "real" process, but the process memory space will not be free'd |
| * until both the parent and the child have exited. |
| */ |
| int kernel_thread (int (*fn)(void *), void *arg, unsigned long flags) |
| { |
| register mm_segment_t fs = get_fs (); |
| register unsigned long syscall asm (SYSCALL_NUM); |
| register unsigned long arg0 asm (SYSCALL_ARG0); |
| register unsigned long ret asm (SYSCALL_RET); |
| |
| set_fs (KERNEL_DS); |
| |
| /* Clone this thread. Note that we don't pass the clone syscall's |
| second argument -- it's ignored for calls from kernel mode (the |
| child's SP is always set to the top of the kernel stack). */ |
| arg0 = flags | CLONE_VM; |
| syscall = __NR_clone; |
| asm volatile ("trap " SYSCALL_SHORT_TRAP |
| : "=r" (ret), "=r" (syscall) |
| : "1" (syscall), "r" (arg0) |
| : SYSCALL_SHORT_CLOBBERS); |
| |
| if (ret == 0) { |
| /* In child thread, call FN and exit. */ |
| arg0 = (*fn) (arg); |
| syscall = __NR_exit; |
| asm volatile ("trap " SYSCALL_SHORT_TRAP |
| : "=r" (ret), "=r" (syscall) |
| : "1" (syscall), "r" (arg0) |
| : SYSCALL_SHORT_CLOBBERS); |
| } |
| |
| /* In parent. */ |
| set_fs (fs); |
| |
| return ret; |
| } |
| |
| void flush_thread (void) |
| { |
| set_fs (USER_DS); |
| } |
| |
| int copy_thread (int nr, unsigned long clone_flags, |
| unsigned long stack_start, unsigned long stack_size, |
| struct task_struct *p, struct pt_regs *regs) |
| { |
| /* Start pushing stuff from the top of the child's kernel stack. */ |
| unsigned long orig_ksp = (unsigned long)p->thread_info + THREAD_SIZE; |
| unsigned long ksp = orig_ksp; |
| /* We push two `state save' stack fames (see entry.S) on the new |
| kernel stack: |
| 1) The innermost one is what switch_thread would have |
| pushed, and is used when we context switch to the child |
| thread for the first time. It's set up to return to |
| ret_from_fork in entry.S. |
| 2) The outermost one (nearest the top) is what a syscall |
| trap would have pushed, and is set up to return to the |
| same location as the parent thread, but with a return |
| value of 0. */ |
| struct pt_regs *child_switch_regs, *child_trap_regs; |
| |
| /* Trap frame. */ |
| ksp -= STATE_SAVE_SIZE; |
| child_trap_regs = (struct pt_regs *)(ksp + STATE_SAVE_PT_OFFSET); |
| /* Switch frame. */ |
| ksp -= STATE_SAVE_SIZE; |
| child_switch_regs = (struct pt_regs *)(ksp + STATE_SAVE_PT_OFFSET); |
| |
| /* First copy parent's register state to child. */ |
| *child_switch_regs = *regs; |
| *child_trap_regs = *regs; |
| |
| /* switch_thread returns to the restored value of the lp |
| register (r31), so we make that the place where we want to |
| jump when the child thread begins running. */ |
| child_switch_regs->gpr[GPR_LP] = (v850_reg_t)ret_from_fork; |
| |
| if (regs->kernel_mode) |
| /* Since we're returning to kernel-mode, make sure the child's |
| stored kernel stack pointer agrees with what the actual |
| stack pointer will be at that point (the trap return code |
| always restores the SP, even when returning to |
| kernel-mode). */ |
| child_trap_regs->gpr[GPR_SP] = orig_ksp; |
| else |
| /* Set the child's user-mode stack-pointer (the name |
| `stack_start' is a misnomer, it's just the initial SP |
| value). */ |
| child_trap_regs->gpr[GPR_SP] = stack_start; |
| |
| /* Thread state for the child (everything else is on the stack). */ |
| p->thread.ksp = ksp; |
| |
| return 0; |
| } |
| |
| /* |
| * fill in the user structure for a core dump.. |
| */ |
| void dump_thread (struct pt_regs *regs, struct user *dump) |
| { |
| #if 0 /* Later. XXX */ |
| dump->magic = CMAGIC; |
| dump->start_code = 0; |
| dump->start_stack = regs->gpr[GPR_SP]; |
| dump->u_tsize = ((unsigned long) current->mm->end_code) >> PAGE_SHIFT; |
| dump->u_dsize = ((unsigned long) (current->mm->brk + |
| (PAGE_SIZE-1))) >> PAGE_SHIFT; |
| dump->u_dsize -= dump->u_tsize; |
| dump->u_ssize = 0; |
| |
| if (dump->start_stack < TASK_SIZE) |
| dump->u_ssize = ((unsigned long) (TASK_SIZE - dump->start_stack)) >> PAGE_SHIFT; |
| |
| dump->u_ar0 = (struct user_regs_struct *)((int)&dump->regs - (int)dump); |
| dump->regs = *regs; |
| dump->u_fpvalid = 0; |
| #endif |
| } |
| |
| /* |
| * sys_execve() executes a new program. |
| */ |
| int sys_execve (char *name, char **argv, char **envp, struct pt_regs *regs) |
| { |
| char *filename = getname (name); |
| int error = PTR_ERR (filename); |
| |
| if (! IS_ERR (filename)) { |
| error = do_execve (filename, argv, envp, regs); |
| putname (filename); |
| } |
| |
| return error; |
| } |
| |
| |
| /* |
| * These bracket the sleeping functions.. |
| */ |
| #define first_sched ((unsigned long)__sched_text_start) |
| #define last_sched ((unsigned long)__sched_text_end) |
| |
| unsigned long get_wchan (struct task_struct *p) |
| { |
| #if 0 /* Barf. Figure out the stack-layout later. XXX */ |
| unsigned long fp, pc; |
| int count = 0; |
| |
| if (!p || p == current || p->state == TASK_RUNNING) |
| return 0; |
| |
| pc = thread_saved_pc (p); |
| |
| /* This quite disgusting function walks up the stack, following |
| saved return address, until it something that's out of bounds |
| (as defined by `first_sched' and `last_sched'). It then |
| returns the last PC that was in-bounds. */ |
| do { |
| if (fp < stack_page + sizeof (struct task_struct) || |
| fp >= 8184+stack_page) |
| return 0; |
| pc = ((unsigned long *)fp)[1]; |
| if (pc < first_sched || pc >= last_sched) |
| return pc; |
| fp = *(unsigned long *) fp; |
| } while (count++ < 16); |
| #endif |
| |
| return 0; |
| } |