| /* |
| * smc911x.c |
| * This is a driver for SMSC's LAN911{5,6,7,8} single-chip Ethernet devices. |
| * |
| * Copyright (C) 2005 Sensoria Corp |
| * Derived from the unified SMC91x driver by Nicolas Pitre |
| * and the smsc911x.c reference driver by SMSC |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| * |
| * Arguments: |
| * watchdog = TX watchdog timeout |
| * tx_fifo_kb = Size of TX FIFO in KB |
| * |
| * History: |
| * 04/16/05 Dustin McIntire Initial version |
| */ |
| static const char version[] = |
| "smc911x.c: v1.0 04-16-2005 by Dustin McIntire <dustin@sensoria.com>\n"; |
| |
| /* Debugging options */ |
| #define ENABLE_SMC_DEBUG_RX 0 |
| #define ENABLE_SMC_DEBUG_TX 0 |
| #define ENABLE_SMC_DEBUG_DMA 0 |
| #define ENABLE_SMC_DEBUG_PKTS 0 |
| #define ENABLE_SMC_DEBUG_MISC 0 |
| #define ENABLE_SMC_DEBUG_FUNC 0 |
| |
| #define SMC_DEBUG_RX ((ENABLE_SMC_DEBUG_RX ? 1 : 0) << 0) |
| #define SMC_DEBUG_TX ((ENABLE_SMC_DEBUG_TX ? 1 : 0) << 1) |
| #define SMC_DEBUG_DMA ((ENABLE_SMC_DEBUG_DMA ? 1 : 0) << 2) |
| #define SMC_DEBUG_PKTS ((ENABLE_SMC_DEBUG_PKTS ? 1 : 0) << 3) |
| #define SMC_DEBUG_MISC ((ENABLE_SMC_DEBUG_MISC ? 1 : 0) << 4) |
| #define SMC_DEBUG_FUNC ((ENABLE_SMC_DEBUG_FUNC ? 1 : 0) << 5) |
| |
| #ifndef SMC_DEBUG |
| #define SMC_DEBUG ( SMC_DEBUG_RX | \ |
| SMC_DEBUG_TX | \ |
| SMC_DEBUG_DMA | \ |
| SMC_DEBUG_PKTS | \ |
| SMC_DEBUG_MISC | \ |
| SMC_DEBUG_FUNC \ |
| ) |
| #endif |
| |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/sched.h> |
| #include <linux/delay.h> |
| #include <linux/interrupt.h> |
| #include <linux/errno.h> |
| #include <linux/ioport.h> |
| #include <linux/crc32.h> |
| #include <linux/device.h> |
| #include <linux/platform_device.h> |
| #include <linux/spinlock.h> |
| #include <linux/ethtool.h> |
| #include <linux/mii.h> |
| #include <linux/workqueue.h> |
| |
| #include <linux/netdevice.h> |
| #include <linux/etherdevice.h> |
| #include <linux/skbuff.h> |
| |
| #include <asm/io.h> |
| |
| #include "smc911x.h" |
| |
| /* |
| * Transmit timeout, default 5 seconds. |
| */ |
| static int watchdog = 5000; |
| module_param(watchdog, int, 0400); |
| MODULE_PARM_DESC(watchdog, "transmit timeout in milliseconds"); |
| |
| static int tx_fifo_kb=8; |
| module_param(tx_fifo_kb, int, 0400); |
| MODULE_PARM_DESC(tx_fifo_kb,"transmit FIFO size in KB (1<x<15)(default=8)"); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:smc911x"); |
| |
| /* |
| * The internal workings of the driver. If you are changing anything |
| * here with the SMC stuff, you should have the datasheet and know |
| * what you are doing. |
| */ |
| #define CARDNAME "smc911x" |
| |
| /* |
| * Use power-down feature of the chip |
| */ |
| #define POWER_DOWN 1 |
| |
| #if SMC_DEBUG > 0 |
| #define DBG(n, args...) \ |
| do { \ |
| if (SMC_DEBUG & (n)) \ |
| printk(args); \ |
| } while (0) |
| |
| #define PRINTK(args...) printk(args) |
| #else |
| #define DBG(n, args...) do { } while (0) |
| #define PRINTK(args...) printk(KERN_DEBUG args) |
| #endif |
| |
| #if SMC_DEBUG_PKTS > 0 |
| static void PRINT_PKT(u_char *buf, int length) |
| { |
| int i; |
| int remainder; |
| int lines; |
| |
| lines = length / 16; |
| remainder = length % 16; |
| |
| for (i = 0; i < lines ; i ++) { |
| int cur; |
| for (cur = 0; cur < 8; cur++) { |
| u_char a, b; |
| a = *buf++; |
| b = *buf++; |
| printk("%02x%02x ", a, b); |
| } |
| printk("\n"); |
| } |
| for (i = 0; i < remainder/2 ; i++) { |
| u_char a, b; |
| a = *buf++; |
| b = *buf++; |
| printk("%02x%02x ", a, b); |
| } |
| printk("\n"); |
| } |
| #else |
| #define PRINT_PKT(x...) do { } while (0) |
| #endif |
| |
| |
| /* this enables an interrupt in the interrupt mask register */ |
| #define SMC_ENABLE_INT(lp, x) do { \ |
| unsigned int __mask; \ |
| __mask = SMC_GET_INT_EN((lp)); \ |
| __mask |= (x); \ |
| SMC_SET_INT_EN((lp), __mask); \ |
| } while (0) |
| |
| /* this disables an interrupt from the interrupt mask register */ |
| #define SMC_DISABLE_INT(lp, x) do { \ |
| unsigned int __mask; \ |
| __mask = SMC_GET_INT_EN((lp)); \ |
| __mask &= ~(x); \ |
| SMC_SET_INT_EN((lp), __mask); \ |
| } while (0) |
| |
| /* |
| * this does a soft reset on the device |
| */ |
| static void smc911x_reset(struct net_device *dev) |
| { |
| struct smc911x_local *lp = netdev_priv(dev); |
| unsigned int reg, timeout=0, resets=1, irq_cfg; |
| unsigned long flags; |
| |
| DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __func__); |
| |
| /* Take out of PM setting first */ |
| if ((SMC_GET_PMT_CTRL(lp) & PMT_CTRL_READY_) == 0) { |
| /* Write to the bytetest will take out of powerdown */ |
| SMC_SET_BYTE_TEST(lp, 0); |
| timeout=10; |
| do { |
| udelay(10); |
| reg = SMC_GET_PMT_CTRL(lp) & PMT_CTRL_READY_; |
| } while (--timeout && !reg); |
| if (timeout == 0) { |
| PRINTK("%s: smc911x_reset timeout waiting for PM restore\n", dev->name); |
| return; |
| } |
| } |
| |
| /* Disable all interrupts */ |
| spin_lock_irqsave(&lp->lock, flags); |
| SMC_SET_INT_EN(lp, 0); |
| spin_unlock_irqrestore(&lp->lock, flags); |
| |
| while (resets--) { |
| SMC_SET_HW_CFG(lp, HW_CFG_SRST_); |
| timeout=10; |
| do { |
| udelay(10); |
| reg = SMC_GET_HW_CFG(lp); |
| /* If chip indicates reset timeout then try again */ |
| if (reg & HW_CFG_SRST_TO_) { |
| PRINTK("%s: chip reset timeout, retrying...\n", dev->name); |
| resets++; |
| break; |
| } |
| } while (--timeout && (reg & HW_CFG_SRST_)); |
| } |
| if (timeout == 0) { |
| PRINTK("%s: smc911x_reset timeout waiting for reset\n", dev->name); |
| return; |
| } |
| |
| /* make sure EEPROM has finished loading before setting GPIO_CFG */ |
| timeout=1000; |
| while (--timeout && (SMC_GET_E2P_CMD(lp) & E2P_CMD_EPC_BUSY_)) |
| udelay(10); |
| |
| if (timeout == 0){ |
| PRINTK("%s: smc911x_reset timeout waiting for EEPROM busy\n", dev->name); |
| return; |
| } |
| |
| /* Initialize interrupts */ |
| SMC_SET_INT_EN(lp, 0); |
| SMC_ACK_INT(lp, -1); |
| |
| /* Reset the FIFO level and flow control settings */ |
| SMC_SET_HW_CFG(lp, (lp->tx_fifo_kb & 0xF) << 16); |
| //TODO: Figure out what appropriate pause time is |
| SMC_SET_FLOW(lp, FLOW_FCPT_ | FLOW_FCEN_); |
| SMC_SET_AFC_CFG(lp, lp->afc_cfg); |
| |
| |
| /* Set to LED outputs */ |
| SMC_SET_GPIO_CFG(lp, 0x70070000); |
| |
| /* |
| * Deassert IRQ for 1*10us for edge type interrupts |
| * and drive IRQ pin push-pull |
| */ |
| irq_cfg = (1 << 24) | INT_CFG_IRQ_EN_ | INT_CFG_IRQ_TYPE_; |
| #ifdef SMC_DYNAMIC_BUS_CONFIG |
| if (lp->cfg.irq_polarity) |
| irq_cfg |= INT_CFG_IRQ_POL_; |
| #endif |
| SMC_SET_IRQ_CFG(lp, irq_cfg); |
| |
| /* clear anything saved */ |
| if (lp->pending_tx_skb != NULL) { |
| dev_kfree_skb (lp->pending_tx_skb); |
| lp->pending_tx_skb = NULL; |
| dev->stats.tx_errors++; |
| dev->stats.tx_aborted_errors++; |
| } |
| } |
| |
| /* |
| * Enable Interrupts, Receive, and Transmit |
| */ |
| static void smc911x_enable(struct net_device *dev) |
| { |
| struct smc911x_local *lp = netdev_priv(dev); |
| unsigned mask, cfg, cr; |
| unsigned long flags; |
| |
| DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __func__); |
| |
| spin_lock_irqsave(&lp->lock, flags); |
| |
| SMC_SET_MAC_ADDR(lp, dev->dev_addr); |
| |
| /* Enable TX */ |
| cfg = SMC_GET_HW_CFG(lp); |
| cfg &= HW_CFG_TX_FIF_SZ_ | 0xFFF; |
| cfg |= HW_CFG_SF_; |
| SMC_SET_HW_CFG(lp, cfg); |
| SMC_SET_FIFO_TDA(lp, 0xFF); |
| /* Update TX stats on every 64 packets received or every 1 sec */ |
| SMC_SET_FIFO_TSL(lp, 64); |
| SMC_SET_GPT_CFG(lp, GPT_CFG_TIMER_EN_ | 10000); |
| |
| SMC_GET_MAC_CR(lp, cr); |
| cr |= MAC_CR_TXEN_ | MAC_CR_HBDIS_; |
| SMC_SET_MAC_CR(lp, cr); |
| SMC_SET_TX_CFG(lp, TX_CFG_TX_ON_); |
| |
| /* Add 2 byte padding to start of packets */ |
| SMC_SET_RX_CFG(lp, (2<<8) & RX_CFG_RXDOFF_); |
| |
| /* Turn on receiver and enable RX */ |
| if (cr & MAC_CR_RXEN_) |
| DBG(SMC_DEBUG_RX, "%s: Receiver already enabled\n", dev->name); |
| |
| SMC_SET_MAC_CR(lp, cr | MAC_CR_RXEN_); |
| |
| /* Interrupt on every received packet */ |
| SMC_SET_FIFO_RSA(lp, 0x01); |
| SMC_SET_FIFO_RSL(lp, 0x00); |
| |
| /* now, enable interrupts */ |
| mask = INT_EN_TDFA_EN_ | INT_EN_TSFL_EN_ | INT_EN_RSFL_EN_ | |
| INT_EN_GPT_INT_EN_ | INT_EN_RXDFH_INT_EN_ | INT_EN_RXE_EN_ | |
| INT_EN_PHY_INT_EN_; |
| if (IS_REV_A(lp->revision)) |
| mask|=INT_EN_RDFL_EN_; |
| else { |
| mask|=INT_EN_RDFO_EN_; |
| } |
| SMC_ENABLE_INT(lp, mask); |
| |
| spin_unlock_irqrestore(&lp->lock, flags); |
| } |
| |
| /* |
| * this puts the device in an inactive state |
| */ |
| static void smc911x_shutdown(struct net_device *dev) |
| { |
| struct smc911x_local *lp = netdev_priv(dev); |
| unsigned cr; |
| unsigned long flags; |
| |
| DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", CARDNAME, __func__); |
| |
| /* Disable IRQ's */ |
| SMC_SET_INT_EN(lp, 0); |
| |
| /* Turn of Rx and TX */ |
| spin_lock_irqsave(&lp->lock, flags); |
| SMC_GET_MAC_CR(lp, cr); |
| cr &= ~(MAC_CR_TXEN_ | MAC_CR_RXEN_ | MAC_CR_HBDIS_); |
| SMC_SET_MAC_CR(lp, cr); |
| SMC_SET_TX_CFG(lp, TX_CFG_STOP_TX_); |
| spin_unlock_irqrestore(&lp->lock, flags); |
| } |
| |
| static inline void smc911x_drop_pkt(struct net_device *dev) |
| { |
| struct smc911x_local *lp = netdev_priv(dev); |
| unsigned int fifo_count, timeout, reg; |
| |
| DBG(SMC_DEBUG_FUNC | SMC_DEBUG_RX, "%s: --> %s\n", CARDNAME, __func__); |
| fifo_count = SMC_GET_RX_FIFO_INF(lp) & 0xFFFF; |
| if (fifo_count <= 4) { |
| /* Manually dump the packet data */ |
| while (fifo_count--) |
| SMC_GET_RX_FIFO(lp); |
| } else { |
| /* Fast forward through the bad packet */ |
| SMC_SET_RX_DP_CTRL(lp, RX_DP_CTRL_FFWD_BUSY_); |
| timeout=50; |
| do { |
| udelay(10); |
| reg = SMC_GET_RX_DP_CTRL(lp) & RX_DP_CTRL_FFWD_BUSY_; |
| } while (--timeout && reg); |
| if (timeout == 0) { |
| PRINTK("%s: timeout waiting for RX fast forward\n", dev->name); |
| } |
| } |
| } |
| |
| /* |
| * This is the procedure to handle the receipt of a packet. |
| * It should be called after checking for packet presence in |
| * the RX status FIFO. It must be called with the spin lock |
| * already held. |
| */ |
| static inline void smc911x_rcv(struct net_device *dev) |
| { |
| struct smc911x_local *lp = netdev_priv(dev); |
| unsigned int pkt_len, status; |
| struct sk_buff *skb; |
| unsigned char *data; |
| |
| DBG(SMC_DEBUG_FUNC | SMC_DEBUG_RX, "%s: --> %s\n", |
| dev->name, __func__); |
| status = SMC_GET_RX_STS_FIFO(lp); |
| DBG(SMC_DEBUG_RX, "%s: Rx pkt len %d status 0x%08x\n", |
| dev->name, (status & 0x3fff0000) >> 16, status & 0xc000ffff); |
| pkt_len = (status & RX_STS_PKT_LEN_) >> 16; |
| if (status & RX_STS_ES_) { |
| /* Deal with a bad packet */ |
| dev->stats.rx_errors++; |
| if (status & RX_STS_CRC_ERR_) |
| dev->stats.rx_crc_errors++; |
| else { |
| if (status & RX_STS_LEN_ERR_) |
| dev->stats.rx_length_errors++; |
| if (status & RX_STS_MCAST_) |
| dev->stats.multicast++; |
| } |
| /* Remove the bad packet data from the RX FIFO */ |
| smc911x_drop_pkt(dev); |
| } else { |
| /* Receive a valid packet */ |
| /* Alloc a buffer with extra room for DMA alignment */ |
| skb=dev_alloc_skb(pkt_len+32); |
| if (unlikely(skb == NULL)) { |
| PRINTK( "%s: Low memory, rcvd packet dropped.\n", |
| dev->name); |
| dev->stats.rx_dropped++; |
| smc911x_drop_pkt(dev); |
| return; |
| } |
| /* Align IP header to 32 bits |
| * Note that the device is configured to add a 2 |
| * byte padding to the packet start, so we really |
| * want to write to the orignal data pointer */ |
| data = skb->data; |
| skb_reserve(skb, 2); |
| skb_put(skb,pkt_len-4); |
| #ifdef SMC_USE_DMA |
| { |
| unsigned int fifo; |
| /* Lower the FIFO threshold if possible */ |
| fifo = SMC_GET_FIFO_INT(lp); |
| if (fifo & 0xFF) fifo--; |
| DBG(SMC_DEBUG_RX, "%s: Setting RX stat FIFO threshold to %d\n", |
| dev->name, fifo & 0xff); |
| SMC_SET_FIFO_INT(lp, fifo); |
| /* Setup RX DMA */ |
| SMC_SET_RX_CFG(lp, RX_CFG_RX_END_ALGN16_ | ((2<<8) & RX_CFG_RXDOFF_)); |
| lp->rxdma_active = 1; |
| lp->current_rx_skb = skb; |
| SMC_PULL_DATA(lp, data, (pkt_len+2+15) & ~15); |
| /* Packet processing deferred to DMA RX interrupt */ |
| } |
| #else |
| SMC_SET_RX_CFG(lp, RX_CFG_RX_END_ALGN4_ | ((2<<8) & RX_CFG_RXDOFF_)); |
| SMC_PULL_DATA(lp, data, pkt_len+2+3); |
| |
| DBG(SMC_DEBUG_PKTS, "%s: Received packet\n", dev->name); |
| PRINT_PKT(data, ((pkt_len - 4) <= 64) ? pkt_len - 4 : 64); |
| skb->protocol = eth_type_trans(skb, dev); |
| netif_rx(skb); |
| dev->stats.rx_packets++; |
| dev->stats.rx_bytes += pkt_len-4; |
| #endif |
| } |
| } |
| |
| /* |
| * This is called to actually send a packet to the chip. |
| */ |
| static void smc911x_hardware_send_pkt(struct net_device *dev) |
| { |
| struct smc911x_local *lp = netdev_priv(dev); |
| struct sk_buff *skb; |
| unsigned int cmdA, cmdB, len; |
| unsigned char *buf; |
| |
| DBG(SMC_DEBUG_FUNC | SMC_DEBUG_TX, "%s: --> %s\n", dev->name, __func__); |
| BUG_ON(lp->pending_tx_skb == NULL); |
| |
| skb = lp->pending_tx_skb; |
| lp->pending_tx_skb = NULL; |
| |
| /* cmdA {25:24] data alignment [20:16] start offset [10:0] buffer length */ |
| /* cmdB {31:16] pkt tag [10:0] length */ |
| #ifdef SMC_USE_DMA |
| /* 16 byte buffer alignment mode */ |
| buf = (char*)((u32)(skb->data) & ~0xF); |
| len = (skb->len + 0xF + ((u32)skb->data & 0xF)) & ~0xF; |
| cmdA = (1<<24) | (((u32)skb->data & 0xF)<<16) | |
| TX_CMD_A_INT_FIRST_SEG_ | TX_CMD_A_INT_LAST_SEG_ | |
| skb->len; |
| #else |
| buf = (char*)((u32)skb->data & ~0x3); |
| len = (skb->len + 3 + ((u32)skb->data & 3)) & ~0x3; |
| cmdA = (((u32)skb->data & 0x3) << 16) | |
| TX_CMD_A_INT_FIRST_SEG_ | TX_CMD_A_INT_LAST_SEG_ | |
| skb->len; |
| #endif |
| /* tag is packet length so we can use this in stats update later */ |
| cmdB = (skb->len << 16) | (skb->len & 0x7FF); |
| |
| DBG(SMC_DEBUG_TX, "%s: TX PKT LENGTH 0x%04x (%d) BUF 0x%p CMDA 0x%08x CMDB 0x%08x\n", |
| dev->name, len, len, buf, cmdA, cmdB); |
| SMC_SET_TX_FIFO(lp, cmdA); |
| SMC_SET_TX_FIFO(lp, cmdB); |
| |
| DBG(SMC_DEBUG_PKTS, "%s: Transmitted packet\n", dev->name); |
| PRINT_PKT(buf, len <= 64 ? len : 64); |
| |
| /* Send pkt via PIO or DMA */ |
| #ifdef SMC_USE_DMA |
| lp->current_tx_skb = skb; |
| SMC_PUSH_DATA(lp, buf, len); |
| /* DMA complete IRQ will free buffer and set jiffies */ |
| #else |
| SMC_PUSH_DATA(lp, buf, len); |
| dev->trans_start = jiffies; |
| dev_kfree_skb_irq(skb); |
| #endif |
| if (!lp->tx_throttle) { |
| netif_wake_queue(dev); |
| } |
| SMC_ENABLE_INT(lp, INT_EN_TDFA_EN_ | INT_EN_TSFL_EN_); |
| } |
| |
| /* |
| * Since I am not sure if I will have enough room in the chip's ram |
| * to store the packet, I call this routine which either sends it |
| * now, or set the card to generates an interrupt when ready |
| * for the packet. |
| */ |
| static int smc911x_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) |
| { |
| struct smc911x_local *lp = netdev_priv(dev); |
| unsigned int free; |
| unsigned long flags; |
| |
| DBG(SMC_DEBUG_FUNC | SMC_DEBUG_TX, "%s: --> %s\n", |
| dev->name, __func__); |
| |
| spin_lock_irqsave(&lp->lock, flags); |
| |
| BUG_ON(lp->pending_tx_skb != NULL); |
| |
| free = SMC_GET_TX_FIFO_INF(lp) & TX_FIFO_INF_TDFREE_; |
| DBG(SMC_DEBUG_TX, "%s: TX free space %d\n", dev->name, free); |
| |
| /* Turn off the flow when running out of space in FIFO */ |
| if (free <= SMC911X_TX_FIFO_LOW_THRESHOLD) { |
| DBG(SMC_DEBUG_TX, "%s: Disabling data flow due to low FIFO space (%d)\n", |
| dev->name, free); |
| /* Reenable when at least 1 packet of size MTU present */ |
| SMC_SET_FIFO_TDA(lp, (SMC911X_TX_FIFO_LOW_THRESHOLD)/64); |
| lp->tx_throttle = 1; |
| netif_stop_queue(dev); |
| } |
| |
| /* Drop packets when we run out of space in TX FIFO |
| * Account for overhead required for: |
| * |
| * Tx command words 8 bytes |
| * Start offset 15 bytes |
| * End padding 15 bytes |
| */ |
| if (unlikely(free < (skb->len + 8 + 15 + 15))) { |
| printk("%s: No Tx free space %d < %d\n", |
| dev->name, free, skb->len); |
| lp->pending_tx_skb = NULL; |
| dev->stats.tx_errors++; |
| dev->stats.tx_dropped++; |
| spin_unlock_irqrestore(&lp->lock, flags); |
| dev_kfree_skb(skb); |
| return NETDEV_TX_OK; |
| } |
| |
| #ifdef SMC_USE_DMA |
| { |
| /* If the DMA is already running then defer this packet Tx until |
| * the DMA IRQ starts it |
| */ |
| if (lp->txdma_active) { |
| DBG(SMC_DEBUG_TX | SMC_DEBUG_DMA, "%s: Tx DMA running, deferring packet\n", dev->name); |
| lp->pending_tx_skb = skb; |
| netif_stop_queue(dev); |
| spin_unlock_irqrestore(&lp->lock, flags); |
| return NETDEV_TX_OK; |
| } else { |
| DBG(SMC_DEBUG_TX | SMC_DEBUG_DMA, "%s: Activating Tx DMA\n", dev->name); |
| lp->txdma_active = 1; |
| } |
| } |
| #endif |
| lp->pending_tx_skb = skb; |
| smc911x_hardware_send_pkt(dev); |
| spin_unlock_irqrestore(&lp->lock, flags); |
| |
| return NETDEV_TX_OK; |
| } |
| |
| /* |
| * This handles a TX status interrupt, which is only called when: |
| * - a TX error occurred, or |
| * - TX of a packet completed. |
| */ |
| static void smc911x_tx(struct net_device *dev) |
| { |
| struct smc911x_local *lp = netdev_priv(dev); |
| unsigned int tx_status; |
| |
| DBG(SMC_DEBUG_FUNC | SMC_DEBUG_TX, "%s: --> %s\n", |
| dev->name, __func__); |
| |
| /* Collect the TX status */ |
| while (((SMC_GET_TX_FIFO_INF(lp) & TX_FIFO_INF_TSUSED_) >> 16) != 0) { |
| DBG(SMC_DEBUG_TX, "%s: Tx stat FIFO used 0x%04x\n", |
| dev->name, |
| (SMC_GET_TX_FIFO_INF(lp) & TX_FIFO_INF_TSUSED_) >> 16); |
| tx_status = SMC_GET_TX_STS_FIFO(lp); |
| dev->stats.tx_packets++; |
| dev->stats.tx_bytes+=tx_status>>16; |
| DBG(SMC_DEBUG_TX, "%s: Tx FIFO tag 0x%04x status 0x%04x\n", |
| dev->name, (tx_status & 0xffff0000) >> 16, |
| tx_status & 0x0000ffff); |
| /* count Tx errors, but ignore lost carrier errors when in |
| * full-duplex mode */ |
| if ((tx_status & TX_STS_ES_) && !(lp->ctl_rfduplx && |
| !(tx_status & 0x00000306))) { |
| dev->stats.tx_errors++; |
| } |
| if (tx_status & TX_STS_MANY_COLL_) { |
| dev->stats.collisions+=16; |
| dev->stats.tx_aborted_errors++; |
| } else { |
| dev->stats.collisions+=(tx_status & TX_STS_COLL_CNT_) >> 3; |
| } |
| /* carrier error only has meaning for half-duplex communication */ |
| if ((tx_status & (TX_STS_LOC_ | TX_STS_NO_CARR_)) && |
| !lp->ctl_rfduplx) { |
| dev->stats.tx_carrier_errors++; |
| } |
| if (tx_status & TX_STS_LATE_COLL_) { |
| dev->stats.collisions++; |
| dev->stats.tx_aborted_errors++; |
| } |
| } |
| } |
| |
| |
| /*---PHY CONTROL AND CONFIGURATION-----------------------------------------*/ |
| /* |
| * Reads a register from the MII Management serial interface |
| */ |
| |
| static int smc911x_phy_read(struct net_device *dev, int phyaddr, int phyreg) |
| { |
| struct smc911x_local *lp = netdev_priv(dev); |
| unsigned int phydata; |
| |
| SMC_GET_MII(lp, phyreg, phyaddr, phydata); |
| |
| DBG(SMC_DEBUG_MISC, "%s: phyaddr=0x%x, phyreg=0x%02x, phydata=0x%04x\n", |
| __func__, phyaddr, phyreg, phydata); |
| return phydata; |
| } |
| |
| |
| /* |
| * Writes a register to the MII Management serial interface |
| */ |
| static void smc911x_phy_write(struct net_device *dev, int phyaddr, int phyreg, |
| int phydata) |
| { |
| struct smc911x_local *lp = netdev_priv(dev); |
| |
| DBG(SMC_DEBUG_MISC, "%s: phyaddr=0x%x, phyreg=0x%x, phydata=0x%x\n", |
| __func__, phyaddr, phyreg, phydata); |
| |
| SMC_SET_MII(lp, phyreg, phyaddr, phydata); |
| } |
| |
| /* |
| * Finds and reports the PHY address (115 and 117 have external |
| * PHY interface 118 has internal only |
| */ |
| static void smc911x_phy_detect(struct net_device *dev) |
| { |
| struct smc911x_local *lp = netdev_priv(dev); |
| int phyaddr; |
| unsigned int cfg, id1, id2; |
| |
| DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __func__); |
| |
| lp->phy_type = 0; |
| |
| /* |
| * Scan all 32 PHY addresses if necessary, starting at |
| * PHY#1 to PHY#31, and then PHY#0 last. |
| */ |
| switch(lp->version) { |
| case CHIP_9115: |
| case CHIP_9117: |
| case CHIP_9215: |
| case CHIP_9217: |
| cfg = SMC_GET_HW_CFG(lp); |
| if (cfg & HW_CFG_EXT_PHY_DET_) { |
| cfg &= ~HW_CFG_PHY_CLK_SEL_; |
| cfg |= HW_CFG_PHY_CLK_SEL_CLK_DIS_; |
| SMC_SET_HW_CFG(lp, cfg); |
| udelay(10); /* Wait for clocks to stop */ |
| |
| cfg |= HW_CFG_EXT_PHY_EN_; |
| SMC_SET_HW_CFG(lp, cfg); |
| udelay(10); /* Wait for clocks to stop */ |
| |
| cfg &= ~HW_CFG_PHY_CLK_SEL_; |
| cfg |= HW_CFG_PHY_CLK_SEL_EXT_PHY_; |
| SMC_SET_HW_CFG(lp, cfg); |
| udelay(10); /* Wait for clocks to stop */ |
| |
| cfg |= HW_CFG_SMI_SEL_; |
| SMC_SET_HW_CFG(lp, cfg); |
| |
| for (phyaddr = 1; phyaddr < 32; ++phyaddr) { |
| |
| /* Read the PHY identifiers */ |
| SMC_GET_PHY_ID1(lp, phyaddr & 31, id1); |
| SMC_GET_PHY_ID2(lp, phyaddr & 31, id2); |
| |
| /* Make sure it is a valid identifier */ |
| if (id1 != 0x0000 && id1 != 0xffff && |
| id1 != 0x8000 && id2 != 0x0000 && |
| id2 != 0xffff && id2 != 0x8000) { |
| /* Save the PHY's address */ |
| lp->mii.phy_id = phyaddr & 31; |
| lp->phy_type = id1 << 16 | id2; |
| break; |
| } |
| } |
| if (phyaddr < 32) |
| /* Found an external PHY */ |
| break; |
| } |
| default: |
| /* Internal media only */ |
| SMC_GET_PHY_ID1(lp, 1, id1); |
| SMC_GET_PHY_ID2(lp, 1, id2); |
| /* Save the PHY's address */ |
| lp->mii.phy_id = 1; |
| lp->phy_type = id1 << 16 | id2; |
| } |
| |
| DBG(SMC_DEBUG_MISC, "%s: phy_id1=0x%x, phy_id2=0x%x phyaddr=0x%d\n", |
| dev->name, id1, id2, lp->mii.phy_id); |
| } |
| |
| /* |
| * Sets the PHY to a configuration as determined by the user. |
| * Called with spin_lock held. |
| */ |
| static int smc911x_phy_fixed(struct net_device *dev) |
| { |
| struct smc911x_local *lp = netdev_priv(dev); |
| int phyaddr = lp->mii.phy_id; |
| int bmcr; |
| |
| DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __func__); |
| |
| /* Enter Link Disable state */ |
| SMC_GET_PHY_BMCR(lp, phyaddr, bmcr); |
| bmcr |= BMCR_PDOWN; |
| SMC_SET_PHY_BMCR(lp, phyaddr, bmcr); |
| |
| /* |
| * Set our fixed capabilities |
| * Disable auto-negotiation |
| */ |
| bmcr &= ~BMCR_ANENABLE; |
| if (lp->ctl_rfduplx) |
| bmcr |= BMCR_FULLDPLX; |
| |
| if (lp->ctl_rspeed == 100) |
| bmcr |= BMCR_SPEED100; |
| |
| /* Write our capabilities to the phy control register */ |
| SMC_SET_PHY_BMCR(lp, phyaddr, bmcr); |
| |
| /* Re-Configure the Receive/Phy Control register */ |
| bmcr &= ~BMCR_PDOWN; |
| SMC_SET_PHY_BMCR(lp, phyaddr, bmcr); |
| |
| return 1; |
| } |
| |
| /* |
| * smc911x_phy_reset - reset the phy |
| * @dev: net device |
| * @phy: phy address |
| * |
| * Issue a software reset for the specified PHY and |
| * wait up to 100ms for the reset to complete. We should |
| * not access the PHY for 50ms after issuing the reset. |
| * |
| * The time to wait appears to be dependent on the PHY. |
| * |
| */ |
| static int smc911x_phy_reset(struct net_device *dev, int phy) |
| { |
| struct smc911x_local *lp = netdev_priv(dev); |
| int timeout; |
| unsigned long flags; |
| unsigned int reg; |
| |
| DBG(SMC_DEBUG_FUNC, "%s: --> %s()\n", dev->name, __func__); |
| |
| spin_lock_irqsave(&lp->lock, flags); |
| reg = SMC_GET_PMT_CTRL(lp); |
| reg &= ~0xfffff030; |
| reg |= PMT_CTRL_PHY_RST_; |
| SMC_SET_PMT_CTRL(lp, reg); |
| spin_unlock_irqrestore(&lp->lock, flags); |
| for (timeout = 2; timeout; timeout--) { |
| msleep(50); |
| spin_lock_irqsave(&lp->lock, flags); |
| reg = SMC_GET_PMT_CTRL(lp); |
| spin_unlock_irqrestore(&lp->lock, flags); |
| if (!(reg & PMT_CTRL_PHY_RST_)) { |
| /* extra delay required because the phy may |
| * not be completed with its reset |
| * when PHY_BCR_RESET_ is cleared. 256us |
| * should suffice, but use 500us to be safe |
| */ |
| udelay(500); |
| break; |
| } |
| } |
| |
| return reg & PMT_CTRL_PHY_RST_; |
| } |
| |
| /* |
| * smc911x_phy_powerdown - powerdown phy |
| * @dev: net device |
| * @phy: phy address |
| * |
| * Power down the specified PHY |
| */ |
| static void smc911x_phy_powerdown(struct net_device *dev, int phy) |
| { |
| struct smc911x_local *lp = netdev_priv(dev); |
| unsigned int bmcr; |
| |
| /* Enter Link Disable state */ |
| SMC_GET_PHY_BMCR(lp, phy, bmcr); |
| bmcr |= BMCR_PDOWN; |
| SMC_SET_PHY_BMCR(lp, phy, bmcr); |
| } |
| |
| /* |
| * smc911x_phy_check_media - check the media status and adjust BMCR |
| * @dev: net device |
| * @init: set true for initialisation |
| * |
| * Select duplex mode depending on negotiation state. This |
| * also updates our carrier state. |
| */ |
| static void smc911x_phy_check_media(struct net_device *dev, int init) |
| { |
| struct smc911x_local *lp = netdev_priv(dev); |
| int phyaddr = lp->mii.phy_id; |
| unsigned int bmcr, cr; |
| |
| DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __func__); |
| |
| if (mii_check_media(&lp->mii, netif_msg_link(lp), init)) { |
| /* duplex state has changed */ |
| SMC_GET_PHY_BMCR(lp, phyaddr, bmcr); |
| SMC_GET_MAC_CR(lp, cr); |
| if (lp->mii.full_duplex) { |
| DBG(SMC_DEBUG_MISC, "%s: Configuring for full-duplex mode\n", dev->name); |
| bmcr |= BMCR_FULLDPLX; |
| cr |= MAC_CR_RCVOWN_; |
| } else { |
| DBG(SMC_DEBUG_MISC, "%s: Configuring for half-duplex mode\n", dev->name); |
| bmcr &= ~BMCR_FULLDPLX; |
| cr &= ~MAC_CR_RCVOWN_; |
| } |
| SMC_SET_PHY_BMCR(lp, phyaddr, bmcr); |
| SMC_SET_MAC_CR(lp, cr); |
| } |
| } |
| |
| /* |
| * Configures the specified PHY through the MII management interface |
| * using Autonegotiation. |
| * Calls smc911x_phy_fixed() if the user has requested a certain config. |
| * If RPC ANEG bit is set, the media selection is dependent purely on |
| * the selection by the MII (either in the MII BMCR reg or the result |
| * of autonegotiation.) If the RPC ANEG bit is cleared, the selection |
| * is controlled by the RPC SPEED and RPC DPLX bits. |
| */ |
| static void smc911x_phy_configure(struct work_struct *work) |
| { |
| struct smc911x_local *lp = container_of(work, struct smc911x_local, |
| phy_configure); |
| struct net_device *dev = lp->netdev; |
| int phyaddr = lp->mii.phy_id; |
| int my_phy_caps; /* My PHY capabilities */ |
| int my_ad_caps; /* My Advertised capabilities */ |
| int status; |
| unsigned long flags; |
| |
| DBG(SMC_DEBUG_FUNC, "%s: --> %s()\n", dev->name, __func__); |
| |
| /* |
| * We should not be called if phy_type is zero. |
| */ |
| if (lp->phy_type == 0) |
| return; |
| |
| if (smc911x_phy_reset(dev, phyaddr)) { |
| printk("%s: PHY reset timed out\n", dev->name); |
| return; |
| } |
| spin_lock_irqsave(&lp->lock, flags); |
| |
| /* |
| * Enable PHY Interrupts (for register 18) |
| * Interrupts listed here are enabled |
| */ |
| SMC_SET_PHY_INT_MASK(lp, phyaddr, PHY_INT_MASK_ENERGY_ON_ | |
| PHY_INT_MASK_ANEG_COMP_ | PHY_INT_MASK_REMOTE_FAULT_ | |
| PHY_INT_MASK_LINK_DOWN_); |
| |
| /* If the user requested no auto neg, then go set his request */ |
| if (lp->mii.force_media) { |
| smc911x_phy_fixed(dev); |
| goto smc911x_phy_configure_exit; |
| } |
| |
| /* Copy our capabilities from MII_BMSR to MII_ADVERTISE */ |
| SMC_GET_PHY_BMSR(lp, phyaddr, my_phy_caps); |
| if (!(my_phy_caps & BMSR_ANEGCAPABLE)) { |
| printk(KERN_INFO "Auto negotiation NOT supported\n"); |
| smc911x_phy_fixed(dev); |
| goto smc911x_phy_configure_exit; |
| } |
| |
| /* CSMA capable w/ both pauses */ |
| my_ad_caps = ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM; |
| |
| if (my_phy_caps & BMSR_100BASE4) |
| my_ad_caps |= ADVERTISE_100BASE4; |
| if (my_phy_caps & BMSR_100FULL) |
| my_ad_caps |= ADVERTISE_100FULL; |
| if (my_phy_caps & BMSR_100HALF) |
| my_ad_caps |= ADVERTISE_100HALF; |
| if (my_phy_caps & BMSR_10FULL) |
| my_ad_caps |= ADVERTISE_10FULL; |
| if (my_phy_caps & BMSR_10HALF) |
| my_ad_caps |= ADVERTISE_10HALF; |
| |
| /* Disable capabilities not selected by our user */ |
| if (lp->ctl_rspeed != 100) |
| my_ad_caps &= ~(ADVERTISE_100BASE4|ADVERTISE_100FULL|ADVERTISE_100HALF); |
| |
| if (!lp->ctl_rfduplx) |
| my_ad_caps &= ~(ADVERTISE_100FULL|ADVERTISE_10FULL); |
| |
| /* Update our Auto-Neg Advertisement Register */ |
| SMC_SET_PHY_MII_ADV(lp, phyaddr, my_ad_caps); |
| lp->mii.advertising = my_ad_caps; |
| |
| /* |
| * Read the register back. Without this, it appears that when |
| * auto-negotiation is restarted, sometimes it isn't ready and |
| * the link does not come up. |
| */ |
| udelay(10); |
| SMC_GET_PHY_MII_ADV(lp, phyaddr, status); |
| |
| DBG(SMC_DEBUG_MISC, "%s: phy caps=0x%04x\n", dev->name, my_phy_caps); |
| DBG(SMC_DEBUG_MISC, "%s: phy advertised caps=0x%04x\n", dev->name, my_ad_caps); |
| |
| /* Restart auto-negotiation process in order to advertise my caps */ |
| SMC_SET_PHY_BMCR(lp, phyaddr, BMCR_ANENABLE | BMCR_ANRESTART); |
| |
| smc911x_phy_check_media(dev, 1); |
| |
| smc911x_phy_configure_exit: |
| spin_unlock_irqrestore(&lp->lock, flags); |
| } |
| |
| /* |
| * smc911x_phy_interrupt |
| * |
| * Purpose: Handle interrupts relating to PHY register 18. This is |
| * called from the "hard" interrupt handler under our private spinlock. |
| */ |
| static void smc911x_phy_interrupt(struct net_device *dev) |
| { |
| struct smc911x_local *lp = netdev_priv(dev); |
| int phyaddr = lp->mii.phy_id; |
| int status; |
| |
| DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __func__); |
| |
| if (lp->phy_type == 0) |
| return; |
| |
| smc911x_phy_check_media(dev, 0); |
| /* read to clear status bits */ |
| SMC_GET_PHY_INT_SRC(lp, phyaddr,status); |
| DBG(SMC_DEBUG_MISC, "%s: PHY interrupt status 0x%04x\n", |
| dev->name, status & 0xffff); |
| DBG(SMC_DEBUG_MISC, "%s: AFC_CFG 0x%08x\n", |
| dev->name, SMC_GET_AFC_CFG(lp)); |
| } |
| |
| /*--- END PHY CONTROL AND CONFIGURATION-------------------------------------*/ |
| |
| /* |
| * This is the main routine of the driver, to handle the device when |
| * it needs some attention. |
| */ |
| static irqreturn_t smc911x_interrupt(int irq, void *dev_id) |
| { |
| struct net_device *dev = dev_id; |
| struct smc911x_local *lp = netdev_priv(dev); |
| unsigned int status, mask, timeout; |
| unsigned int rx_overrun=0, cr, pkts; |
| unsigned long flags; |
| |
| DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __func__); |
| |
| spin_lock_irqsave(&lp->lock, flags); |
| |
| /* Spurious interrupt check */ |
| if ((SMC_GET_IRQ_CFG(lp) & (INT_CFG_IRQ_INT_ | INT_CFG_IRQ_EN_)) != |
| (INT_CFG_IRQ_INT_ | INT_CFG_IRQ_EN_)) { |
| spin_unlock_irqrestore(&lp->lock, flags); |
| return IRQ_NONE; |
| } |
| |
| mask = SMC_GET_INT_EN(lp); |
| SMC_SET_INT_EN(lp, 0); |
| |
| /* set a timeout value, so I don't stay here forever */ |
| timeout = 8; |
| |
| |
| do { |
| status = SMC_GET_INT(lp); |
| |
| DBG(SMC_DEBUG_MISC, "%s: INT 0x%08x MASK 0x%08x OUTSIDE MASK 0x%08x\n", |
| dev->name, status, mask, status & ~mask); |
| |
| status &= mask; |
| if (!status) |
| break; |
| |
| /* Handle SW interrupt condition */ |
| if (status & INT_STS_SW_INT_) { |
| SMC_ACK_INT(lp, INT_STS_SW_INT_); |
| mask &= ~INT_EN_SW_INT_EN_; |
| } |
| /* Handle various error conditions */ |
| if (status & INT_STS_RXE_) { |
| SMC_ACK_INT(lp, INT_STS_RXE_); |
| dev->stats.rx_errors++; |
| } |
| if (status & INT_STS_RXDFH_INT_) { |
| SMC_ACK_INT(lp, INT_STS_RXDFH_INT_); |
| dev->stats.rx_dropped+=SMC_GET_RX_DROP(lp); |
| } |
| /* Undocumented interrupt-what is the right thing to do here? */ |
| if (status & INT_STS_RXDF_INT_) { |
| SMC_ACK_INT(lp, INT_STS_RXDF_INT_); |
| } |
| |
| /* Rx Data FIFO exceeds set level */ |
| if (status & INT_STS_RDFL_) { |
| if (IS_REV_A(lp->revision)) { |
| rx_overrun=1; |
| SMC_GET_MAC_CR(lp, cr); |
| cr &= ~MAC_CR_RXEN_; |
| SMC_SET_MAC_CR(lp, cr); |
| DBG(SMC_DEBUG_RX, "%s: RX overrun\n", dev->name); |
| dev->stats.rx_errors++; |
| dev->stats.rx_fifo_errors++; |
| } |
| SMC_ACK_INT(lp, INT_STS_RDFL_); |
| } |
| if (status & INT_STS_RDFO_) { |
| if (!IS_REV_A(lp->revision)) { |
| SMC_GET_MAC_CR(lp, cr); |
| cr &= ~MAC_CR_RXEN_; |
| SMC_SET_MAC_CR(lp, cr); |
| rx_overrun=1; |
| DBG(SMC_DEBUG_RX, "%s: RX overrun\n", dev->name); |
| dev->stats.rx_errors++; |
| dev->stats.rx_fifo_errors++; |
| } |
| SMC_ACK_INT(lp, INT_STS_RDFO_); |
| } |
| /* Handle receive condition */ |
| if ((status & INT_STS_RSFL_) || rx_overrun) { |
| unsigned int fifo; |
| DBG(SMC_DEBUG_RX, "%s: RX irq\n", dev->name); |
| fifo = SMC_GET_RX_FIFO_INF(lp); |
| pkts = (fifo & RX_FIFO_INF_RXSUSED_) >> 16; |
| DBG(SMC_DEBUG_RX, "%s: Rx FIFO pkts %d, bytes %d\n", |
| dev->name, pkts, fifo & 0xFFFF ); |
| if (pkts != 0) { |
| #ifdef SMC_USE_DMA |
| unsigned int fifo; |
| if (lp->rxdma_active){ |
| DBG(SMC_DEBUG_RX | SMC_DEBUG_DMA, |
| "%s: RX DMA active\n", dev->name); |
| /* The DMA is already running so up the IRQ threshold */ |
| fifo = SMC_GET_FIFO_INT(lp) & ~0xFF; |
| fifo |= pkts & 0xFF; |
| DBG(SMC_DEBUG_RX, |
| "%s: Setting RX stat FIFO threshold to %d\n", |
| dev->name, fifo & 0xff); |
| SMC_SET_FIFO_INT(lp, fifo); |
| } else |
| #endif |
| smc911x_rcv(dev); |
| } |
| SMC_ACK_INT(lp, INT_STS_RSFL_); |
| } |
| /* Handle transmit FIFO available */ |
| if (status & INT_STS_TDFA_) { |
| DBG(SMC_DEBUG_TX, "%s: TX data FIFO space available irq\n", dev->name); |
| SMC_SET_FIFO_TDA(lp, 0xFF); |
| lp->tx_throttle = 0; |
| #ifdef SMC_USE_DMA |
| if (!lp->txdma_active) |
| #endif |
| netif_wake_queue(dev); |
| SMC_ACK_INT(lp, INT_STS_TDFA_); |
| } |
| /* Handle transmit done condition */ |
| #if 1 |
| if (status & (INT_STS_TSFL_ | INT_STS_GPT_INT_)) { |
| DBG(SMC_DEBUG_TX | SMC_DEBUG_MISC, |
| "%s: Tx stat FIFO limit (%d) /GPT irq\n", |
| dev->name, (SMC_GET_FIFO_INT(lp) & 0x00ff0000) >> 16); |
| smc911x_tx(dev); |
| SMC_SET_GPT_CFG(lp, GPT_CFG_TIMER_EN_ | 10000); |
| SMC_ACK_INT(lp, INT_STS_TSFL_); |
| SMC_ACK_INT(lp, INT_STS_TSFL_ | INT_STS_GPT_INT_); |
| } |
| #else |
| if (status & INT_STS_TSFL_) { |
| DBG(SMC_DEBUG_TX, "%s: TX status FIFO limit (%d) irq\n", dev->name, ); |
| smc911x_tx(dev); |
| SMC_ACK_INT(lp, INT_STS_TSFL_); |
| } |
| |
| if (status & INT_STS_GPT_INT_) { |
| DBG(SMC_DEBUG_RX, "%s: IRQ_CFG 0x%08x FIFO_INT 0x%08x RX_CFG 0x%08x\n", |
| dev->name, |
| SMC_GET_IRQ_CFG(lp), |
| SMC_GET_FIFO_INT(lp), |
| SMC_GET_RX_CFG(lp)); |
| DBG(SMC_DEBUG_RX, "%s: Rx Stat FIFO Used 0x%02x " |
| "Data FIFO Used 0x%04x Stat FIFO 0x%08x\n", |
| dev->name, |
| (SMC_GET_RX_FIFO_INF(lp) & 0x00ff0000) >> 16, |
| SMC_GET_RX_FIFO_INF(lp) & 0xffff, |
| SMC_GET_RX_STS_FIFO_PEEK(lp)); |
| SMC_SET_GPT_CFG(lp, GPT_CFG_TIMER_EN_ | 10000); |
| SMC_ACK_INT(lp, INT_STS_GPT_INT_); |
| } |
| #endif |
| |
| /* Handle PHY interrupt condition */ |
| if (status & INT_STS_PHY_INT_) { |
| DBG(SMC_DEBUG_MISC, "%s: PHY irq\n", dev->name); |
| smc911x_phy_interrupt(dev); |
| SMC_ACK_INT(lp, INT_STS_PHY_INT_); |
| } |
| } while (--timeout); |
| |
| /* restore mask state */ |
| SMC_SET_INT_EN(lp, mask); |
| |
| DBG(SMC_DEBUG_MISC, "%s: Interrupt done (%d loops)\n", |
| dev->name, 8-timeout); |
| |
| spin_unlock_irqrestore(&lp->lock, flags); |
| |
| return IRQ_HANDLED; |
| } |
| |
| #ifdef SMC_USE_DMA |
| static void |
| smc911x_tx_dma_irq(int dma, void *data) |
| { |
| struct net_device *dev = (struct net_device *)data; |
| struct smc911x_local *lp = netdev_priv(dev); |
| struct sk_buff *skb = lp->current_tx_skb; |
| unsigned long flags; |
| |
| DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __func__); |
| |
| DBG(SMC_DEBUG_TX | SMC_DEBUG_DMA, "%s: TX DMA irq handler\n", dev->name); |
| /* Clear the DMA interrupt sources */ |
| SMC_DMA_ACK_IRQ(dev, dma); |
| BUG_ON(skb == NULL); |
| dma_unmap_single(NULL, tx_dmabuf, tx_dmalen, DMA_TO_DEVICE); |
| dev->trans_start = jiffies; |
| dev_kfree_skb_irq(skb); |
| lp->current_tx_skb = NULL; |
| if (lp->pending_tx_skb != NULL) |
| smc911x_hardware_send_pkt(dev); |
| else { |
| DBG(SMC_DEBUG_TX | SMC_DEBUG_DMA, |
| "%s: No pending Tx packets. DMA disabled\n", dev->name); |
| spin_lock_irqsave(&lp->lock, flags); |
| lp->txdma_active = 0; |
| if (!lp->tx_throttle) { |
| netif_wake_queue(dev); |
| } |
| spin_unlock_irqrestore(&lp->lock, flags); |
| } |
| |
| DBG(SMC_DEBUG_TX | SMC_DEBUG_DMA, |
| "%s: TX DMA irq completed\n", dev->name); |
| } |
| static void |
| smc911x_rx_dma_irq(int dma, void *data) |
| { |
| struct net_device *dev = (struct net_device *)data; |
| unsigned long ioaddr = dev->base_addr; |
| struct smc911x_local *lp = netdev_priv(dev); |
| struct sk_buff *skb = lp->current_rx_skb; |
| unsigned long flags; |
| unsigned int pkts; |
| |
| DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __func__); |
| DBG(SMC_DEBUG_RX | SMC_DEBUG_DMA, "%s: RX DMA irq handler\n", dev->name); |
| /* Clear the DMA interrupt sources */ |
| SMC_DMA_ACK_IRQ(dev, dma); |
| dma_unmap_single(NULL, rx_dmabuf, rx_dmalen, DMA_FROM_DEVICE); |
| BUG_ON(skb == NULL); |
| lp->current_rx_skb = NULL; |
| PRINT_PKT(skb->data, skb->len); |
| skb->protocol = eth_type_trans(skb, dev); |
| dev->stats.rx_packets++; |
| dev->stats.rx_bytes += skb->len; |
| netif_rx(skb); |
| |
| spin_lock_irqsave(&lp->lock, flags); |
| pkts = (SMC_GET_RX_FIFO_INF(lp) & RX_FIFO_INF_RXSUSED_) >> 16; |
| if (pkts != 0) { |
| smc911x_rcv(dev); |
| }else { |
| lp->rxdma_active = 0; |
| } |
| spin_unlock_irqrestore(&lp->lock, flags); |
| DBG(SMC_DEBUG_RX | SMC_DEBUG_DMA, |
| "%s: RX DMA irq completed. DMA RX FIFO PKTS %d\n", |
| dev->name, pkts); |
| } |
| #endif /* SMC_USE_DMA */ |
| |
| #ifdef CONFIG_NET_POLL_CONTROLLER |
| /* |
| * Polling receive - used by netconsole and other diagnostic tools |
| * to allow network i/o with interrupts disabled. |
| */ |
| static void smc911x_poll_controller(struct net_device *dev) |
| { |
| disable_irq(dev->irq); |
| smc911x_interrupt(dev->irq, dev); |
| enable_irq(dev->irq); |
| } |
| #endif |
| |
| /* Our watchdog timed out. Called by the networking layer */ |
| static void smc911x_timeout(struct net_device *dev) |
| { |
| struct smc911x_local *lp = netdev_priv(dev); |
| int status, mask; |
| unsigned long flags; |
| |
| DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __func__); |
| |
| spin_lock_irqsave(&lp->lock, flags); |
| status = SMC_GET_INT(lp); |
| mask = SMC_GET_INT_EN(lp); |
| spin_unlock_irqrestore(&lp->lock, flags); |
| DBG(SMC_DEBUG_MISC, "%s: INT 0x%02x MASK 0x%02x\n", |
| dev->name, status, mask); |
| |
| /* Dump the current TX FIFO contents and restart */ |
| mask = SMC_GET_TX_CFG(lp); |
| SMC_SET_TX_CFG(lp, mask | TX_CFG_TXS_DUMP_ | TX_CFG_TXD_DUMP_); |
| /* |
| * Reconfiguring the PHY doesn't seem like a bad idea here, but |
| * smc911x_phy_configure() calls msleep() which calls schedule_timeout() |
| * which calls schedule(). Hence we use a work queue. |
| */ |
| if (lp->phy_type != 0) |
| schedule_work(&lp->phy_configure); |
| |
| /* We can accept TX packets again */ |
| dev->trans_start = jiffies; /* prevent tx timeout */ |
| netif_wake_queue(dev); |
| } |
| |
| /* |
| * This routine will, depending on the values passed to it, |
| * either make it accept multicast packets, go into |
| * promiscuous mode (for TCPDUMP and cousins) or accept |
| * a select set of multicast packets |
| */ |
| static void smc911x_set_multicast_list(struct net_device *dev) |
| { |
| struct smc911x_local *lp = netdev_priv(dev); |
| unsigned int multicast_table[2]; |
| unsigned int mcr, update_multicast = 0; |
| unsigned long flags; |
| |
| DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __func__); |
| |
| spin_lock_irqsave(&lp->lock, flags); |
| SMC_GET_MAC_CR(lp, mcr); |
| spin_unlock_irqrestore(&lp->lock, flags); |
| |
| if (dev->flags & IFF_PROMISC) { |
| |
| DBG(SMC_DEBUG_MISC, "%s: RCR_PRMS\n", dev->name); |
| mcr |= MAC_CR_PRMS_; |
| } |
| /* |
| * Here, I am setting this to accept all multicast packets. |
| * I don't need to zero the multicast table, because the flag is |
| * checked before the table is |
| */ |
| else if (dev->flags & IFF_ALLMULTI || netdev_mc_count(dev) > 16) { |
| DBG(SMC_DEBUG_MISC, "%s: RCR_ALMUL\n", dev->name); |
| mcr |= MAC_CR_MCPAS_; |
| } |
| |
| /* |
| * This sets the internal hardware table to filter out unwanted |
| * multicast packets before they take up memory. |
| * |
| * The SMC chip uses a hash table where the high 6 bits of the CRC of |
| * address are the offset into the table. If that bit is 1, then the |
| * multicast packet is accepted. Otherwise, it's dropped silently. |
| * |
| * To use the 6 bits as an offset into the table, the high 1 bit is |
| * the number of the 32 bit register, while the low 5 bits are the bit |
| * within that register. |
| */ |
| else if (!netdev_mc_empty(dev)) { |
| struct netdev_hw_addr *ha; |
| |
| /* Set the Hash perfec mode */ |
| mcr |= MAC_CR_HPFILT_; |
| |
| /* start with a table of all zeros: reject all */ |
| memset(multicast_table, 0, sizeof(multicast_table)); |
| |
| netdev_for_each_mc_addr(ha, dev) { |
| u32 position; |
| |
| /* make sure this is a multicast address - |
| shouldn't this be a given if we have it here ? */ |
| if (!(*ha->addr & 1)) |
| continue; |
| |
| /* upper 6 bits are used as hash index */ |
| position = ether_crc(ETH_ALEN, ha->addr)>>26; |
| |
| multicast_table[position>>5] |= 1 << (position&0x1f); |
| } |
| |
| /* be sure I get rid of flags I might have set */ |
| mcr &= ~(MAC_CR_PRMS_ | MAC_CR_MCPAS_); |
| |
| /* now, the table can be loaded into the chipset */ |
| update_multicast = 1; |
| } else { |
| DBG(SMC_DEBUG_MISC, "%s: ~(MAC_CR_PRMS_|MAC_CR_MCPAS_)\n", |
| dev->name); |
| mcr &= ~(MAC_CR_PRMS_ | MAC_CR_MCPAS_); |
| |
| /* |
| * since I'm disabling all multicast entirely, I need to |
| * clear the multicast list |
| */ |
| memset(multicast_table, 0, sizeof(multicast_table)); |
| update_multicast = 1; |
| } |
| |
| spin_lock_irqsave(&lp->lock, flags); |
| SMC_SET_MAC_CR(lp, mcr); |
| if (update_multicast) { |
| DBG(SMC_DEBUG_MISC, |
| "%s: update mcast hash table 0x%08x 0x%08x\n", |
| dev->name, multicast_table[0], multicast_table[1]); |
| SMC_SET_HASHL(lp, multicast_table[0]); |
| SMC_SET_HASHH(lp, multicast_table[1]); |
| } |
| spin_unlock_irqrestore(&lp->lock, flags); |
| } |
| |
| |
| /* |
| * Open and Initialize the board |
| * |
| * Set up everything, reset the card, etc.. |
| */ |
| static int |
| smc911x_open(struct net_device *dev) |
| { |
| struct smc911x_local *lp = netdev_priv(dev); |
| |
| DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __func__); |
| |
| /* |
| * Check that the address is valid. If its not, refuse |
| * to bring the device up. The user must specify an |
| * address using ifconfig eth0 hw ether xx:xx:xx:xx:xx:xx |
| */ |
| if (!is_valid_ether_addr(dev->dev_addr)) { |
| PRINTK("%s: no valid ethernet hw addr\n", __func__); |
| return -EINVAL; |
| } |
| |
| /* reset the hardware */ |
| smc911x_reset(dev); |
| |
| /* Configure the PHY, initialize the link state */ |
| smc911x_phy_configure(&lp->phy_configure); |
| |
| /* Turn on Tx + Rx */ |
| smc911x_enable(dev); |
| |
| netif_start_queue(dev); |
| |
| return 0; |
| } |
| |
| /* |
| * smc911x_close |
| * |
| * this makes the board clean up everything that it can |
| * and not talk to the outside world. Caused by |
| * an 'ifconfig ethX down' |
| */ |
| static int smc911x_close(struct net_device *dev) |
| { |
| struct smc911x_local *lp = netdev_priv(dev); |
| |
| DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __func__); |
| |
| netif_stop_queue(dev); |
| netif_carrier_off(dev); |
| |
| /* clear everything */ |
| smc911x_shutdown(dev); |
| |
| if (lp->phy_type != 0) { |
| /* We need to ensure that no calls to |
| * smc911x_phy_configure are pending. |
| */ |
| cancel_work_sync(&lp->phy_configure); |
| smc911x_phy_powerdown(dev, lp->mii.phy_id); |
| } |
| |
| if (lp->pending_tx_skb) { |
| dev_kfree_skb(lp->pending_tx_skb); |
| lp->pending_tx_skb = NULL; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Ethtool support |
| */ |
| static int |
| smc911x_ethtool_getsettings(struct net_device *dev, struct ethtool_cmd *cmd) |
| { |
| struct smc911x_local *lp = netdev_priv(dev); |
| int ret, status; |
| unsigned long flags; |
| |
| DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __func__); |
| cmd->maxtxpkt = 1; |
| cmd->maxrxpkt = 1; |
| |
| if (lp->phy_type != 0) { |
| spin_lock_irqsave(&lp->lock, flags); |
| ret = mii_ethtool_gset(&lp->mii, cmd); |
| spin_unlock_irqrestore(&lp->lock, flags); |
| } else { |
| cmd->supported = SUPPORTED_10baseT_Half | |
| SUPPORTED_10baseT_Full | |
| SUPPORTED_TP | SUPPORTED_AUI; |
| |
| if (lp->ctl_rspeed == 10) |
| ethtool_cmd_speed_set(cmd, SPEED_10); |
| else if (lp->ctl_rspeed == 100) |
| ethtool_cmd_speed_set(cmd, SPEED_100); |
| |
| cmd->autoneg = AUTONEG_DISABLE; |
| if (lp->mii.phy_id==1) |
| cmd->transceiver = XCVR_INTERNAL; |
| else |
| cmd->transceiver = XCVR_EXTERNAL; |
| cmd->port = 0; |
| SMC_GET_PHY_SPECIAL(lp, lp->mii.phy_id, status); |
| cmd->duplex = |
| (status & (PHY_SPECIAL_SPD_10FULL_ | PHY_SPECIAL_SPD_100FULL_)) ? |
| DUPLEX_FULL : DUPLEX_HALF; |
| ret = 0; |
| } |
| |
| return ret; |
| } |
| |
| static int |
| smc911x_ethtool_setsettings(struct net_device *dev, struct ethtool_cmd *cmd) |
| { |
| struct smc911x_local *lp = netdev_priv(dev); |
| int ret; |
| unsigned long flags; |
| |
| if (lp->phy_type != 0) { |
| spin_lock_irqsave(&lp->lock, flags); |
| ret = mii_ethtool_sset(&lp->mii, cmd); |
| spin_unlock_irqrestore(&lp->lock, flags); |
| } else { |
| if (cmd->autoneg != AUTONEG_DISABLE || |
| cmd->speed != SPEED_10 || |
| (cmd->duplex != DUPLEX_HALF && cmd->duplex != DUPLEX_FULL) || |
| (cmd->port != PORT_TP && cmd->port != PORT_AUI)) |
| return -EINVAL; |
| |
| lp->ctl_rfduplx = cmd->duplex == DUPLEX_FULL; |
| |
| ret = 0; |
| } |
| |
| return ret; |
| } |
| |
| static void |
| smc911x_ethtool_getdrvinfo(struct net_device *dev, struct ethtool_drvinfo *info) |
| { |
| strncpy(info->driver, CARDNAME, sizeof(info->driver)); |
| strncpy(info->version, version, sizeof(info->version)); |
| strncpy(info->bus_info, dev_name(dev->dev.parent), sizeof(info->bus_info)); |
| } |
| |
| static int smc911x_ethtool_nwayreset(struct net_device *dev) |
| { |
| struct smc911x_local *lp = netdev_priv(dev); |
| int ret = -EINVAL; |
| unsigned long flags; |
| |
| if (lp->phy_type != 0) { |
| spin_lock_irqsave(&lp->lock, flags); |
| ret = mii_nway_restart(&lp->mii); |
| spin_unlock_irqrestore(&lp->lock, flags); |
| } |
| |
| return ret; |
| } |
| |
| static u32 smc911x_ethtool_getmsglevel(struct net_device *dev) |
| { |
| struct smc911x_local *lp = netdev_priv(dev); |
| return lp->msg_enable; |
| } |
| |
| static void smc911x_ethtool_setmsglevel(struct net_device *dev, u32 level) |
| { |
| struct smc911x_local *lp = netdev_priv(dev); |
| lp->msg_enable = level; |
| } |
| |
| static int smc911x_ethtool_getregslen(struct net_device *dev) |
| { |
| /* System regs + MAC regs + PHY regs */ |
| return (((E2P_CMD - ID_REV)/4 + 1) + |
| (WUCSR - MAC_CR)+1 + 32) * sizeof(u32); |
| } |
| |
| static void smc911x_ethtool_getregs(struct net_device *dev, |
| struct ethtool_regs* regs, void *buf) |
| { |
| struct smc911x_local *lp = netdev_priv(dev); |
| unsigned long flags; |
| u32 reg,i,j=0; |
| u32 *data = (u32*)buf; |
| |
| regs->version = lp->version; |
| for(i=ID_REV;i<=E2P_CMD;i+=4) { |
| data[j++] = SMC_inl(lp, i); |
| } |
| for(i=MAC_CR;i<=WUCSR;i++) { |
| spin_lock_irqsave(&lp->lock, flags); |
| SMC_GET_MAC_CSR(lp, i, reg); |
| spin_unlock_irqrestore(&lp->lock, flags); |
| data[j++] = reg; |
| } |
| for(i=0;i<=31;i++) { |
| spin_lock_irqsave(&lp->lock, flags); |
| SMC_GET_MII(lp, i, lp->mii.phy_id, reg); |
| spin_unlock_irqrestore(&lp->lock, flags); |
| data[j++] = reg & 0xFFFF; |
| } |
| } |
| |
| static int smc911x_ethtool_wait_eeprom_ready(struct net_device *dev) |
| { |
| struct smc911x_local *lp = netdev_priv(dev); |
| unsigned int timeout; |
| int e2p_cmd; |
| |
| e2p_cmd = SMC_GET_E2P_CMD(lp); |
| for(timeout=10;(e2p_cmd & E2P_CMD_EPC_BUSY_) && timeout; timeout--) { |
| if (e2p_cmd & E2P_CMD_EPC_TIMEOUT_) { |
| PRINTK("%s: %s timeout waiting for EEPROM to respond\n", |
| dev->name, __func__); |
| return -EFAULT; |
| } |
| mdelay(1); |
| e2p_cmd = SMC_GET_E2P_CMD(lp); |
| } |
| if (timeout == 0) { |
| PRINTK("%s: %s timeout waiting for EEPROM CMD not busy\n", |
| dev->name, __func__); |
| return -ETIMEDOUT; |
| } |
| return 0; |
| } |
| |
| static inline int smc911x_ethtool_write_eeprom_cmd(struct net_device *dev, |
| int cmd, int addr) |
| { |
| struct smc911x_local *lp = netdev_priv(dev); |
| int ret; |
| |
| if ((ret = smc911x_ethtool_wait_eeprom_ready(dev))!=0) |
| return ret; |
| SMC_SET_E2P_CMD(lp, E2P_CMD_EPC_BUSY_ | |
| ((cmd) & (0x7<<28)) | |
| ((addr) & 0xFF)); |
| return 0; |
| } |
| |
| static inline int smc911x_ethtool_read_eeprom_byte(struct net_device *dev, |
| u8 *data) |
| { |
| struct smc911x_local *lp = netdev_priv(dev); |
| int ret; |
| |
| if ((ret = smc911x_ethtool_wait_eeprom_ready(dev))!=0) |
| return ret; |
| *data = SMC_GET_E2P_DATA(lp); |
| return 0; |
| } |
| |
| static inline int smc911x_ethtool_write_eeprom_byte(struct net_device *dev, |
| u8 data) |
| { |
| struct smc911x_local *lp = netdev_priv(dev); |
| int ret; |
| |
| if ((ret = smc911x_ethtool_wait_eeprom_ready(dev))!=0) |
| return ret; |
| SMC_SET_E2P_DATA(lp, data); |
| return 0; |
| } |
| |
| static int smc911x_ethtool_geteeprom(struct net_device *dev, |
| struct ethtool_eeprom *eeprom, u8 *data) |
| { |
| u8 eebuf[SMC911X_EEPROM_LEN]; |
| int i, ret; |
| |
| for(i=0;i<SMC911X_EEPROM_LEN;i++) { |
| if ((ret=smc911x_ethtool_write_eeprom_cmd(dev, E2P_CMD_EPC_CMD_READ_, i ))!=0) |
| return ret; |
| if ((ret=smc911x_ethtool_read_eeprom_byte(dev, &eebuf[i]))!=0) |
| return ret; |
| } |
| memcpy(data, eebuf+eeprom->offset, eeprom->len); |
| return 0; |
| } |
| |
| static int smc911x_ethtool_seteeprom(struct net_device *dev, |
| struct ethtool_eeprom *eeprom, u8 *data) |
| { |
| int i, ret; |
| |
| /* Enable erase */ |
| if ((ret=smc911x_ethtool_write_eeprom_cmd(dev, E2P_CMD_EPC_CMD_EWEN_, 0 ))!=0) |
| return ret; |
| for(i=eeprom->offset;i<(eeprom->offset+eeprom->len);i++) { |
| /* erase byte */ |
| if ((ret=smc911x_ethtool_write_eeprom_cmd(dev, E2P_CMD_EPC_CMD_ERASE_, i ))!=0) |
| return ret; |
| /* write byte */ |
| if ((ret=smc911x_ethtool_write_eeprom_byte(dev, *data))!=0) |
| return ret; |
| if ((ret=smc911x_ethtool_write_eeprom_cmd(dev, E2P_CMD_EPC_CMD_WRITE_, i ))!=0) |
| return ret; |
| } |
| return 0; |
| } |
| |
| static int smc911x_ethtool_geteeprom_len(struct net_device *dev) |
| { |
| return SMC911X_EEPROM_LEN; |
| } |
| |
| static const struct ethtool_ops smc911x_ethtool_ops = { |
| .get_settings = smc911x_ethtool_getsettings, |
| .set_settings = smc911x_ethtool_setsettings, |
| .get_drvinfo = smc911x_ethtool_getdrvinfo, |
| .get_msglevel = smc911x_ethtool_getmsglevel, |
| .set_msglevel = smc911x_ethtool_setmsglevel, |
| .nway_reset = smc911x_ethtool_nwayreset, |
| .get_link = ethtool_op_get_link, |
| .get_regs_len = smc911x_ethtool_getregslen, |
| .get_regs = smc911x_ethtool_getregs, |
| .get_eeprom_len = smc911x_ethtool_geteeprom_len, |
| .get_eeprom = smc911x_ethtool_geteeprom, |
| .set_eeprom = smc911x_ethtool_seteeprom, |
| }; |
| |
| /* |
| * smc911x_findirq |
| * |
| * This routine has a simple purpose -- make the SMC chip generate an |
| * interrupt, so an auto-detect routine can detect it, and find the IRQ, |
| */ |
| static int __devinit smc911x_findirq(struct net_device *dev) |
| { |
| struct smc911x_local *lp = netdev_priv(dev); |
| int timeout = 20; |
| unsigned long cookie; |
| |
| DBG(SMC_DEBUG_FUNC, "--> %s\n", __func__); |
| |
| cookie = probe_irq_on(); |
| |
| /* |
| * Force a SW interrupt |
| */ |
| |
| SMC_SET_INT_EN(lp, INT_EN_SW_INT_EN_); |
| |
| /* |
| * Wait until positive that the interrupt has been generated |
| */ |
| do { |
| int int_status; |
| udelay(10); |
| int_status = SMC_GET_INT_EN(lp); |
| if (int_status & INT_EN_SW_INT_EN_) |
| break; /* got the interrupt */ |
| } while (--timeout); |
| |
| /* |
| * there is really nothing that I can do here if timeout fails, |
| * as autoirq_report will return a 0 anyway, which is what I |
| * want in this case. Plus, the clean up is needed in both |
| * cases. |
| */ |
| |
| /* and disable all interrupts again */ |
| SMC_SET_INT_EN(lp, 0); |
| |
| /* and return what I found */ |
| return probe_irq_off(cookie); |
| } |
| |
| static const struct net_device_ops smc911x_netdev_ops = { |
| .ndo_open = smc911x_open, |
| .ndo_stop = smc911x_close, |
| .ndo_start_xmit = smc911x_hard_start_xmit, |
| .ndo_tx_timeout = smc911x_timeout, |
| .ndo_set_multicast_list = smc911x_set_multicast_list, |
| .ndo_change_mtu = eth_change_mtu, |
| .ndo_validate_addr = eth_validate_addr, |
| .ndo_set_mac_address = eth_mac_addr, |
| #ifdef CONFIG_NET_POLL_CONTROLLER |
| .ndo_poll_controller = smc911x_poll_controller, |
| #endif |
| }; |
| |
| /* |
| * Function: smc911x_probe(unsigned long ioaddr) |
| * |
| * Purpose: |
| * Tests to see if a given ioaddr points to an SMC911x chip. |
| * Returns a 0 on success |
| * |
| * Algorithm: |
| * (1) see if the endian word is OK |
| * (1) see if I recognize the chip ID in the appropriate register |
| * |
| * Here I do typical initialization tasks. |
| * |
| * o Initialize the structure if needed |
| * o print out my vanity message if not done so already |
| * o print out what type of hardware is detected |
| * o print out the ethernet address |
| * o find the IRQ |
| * o set up my private data |
| * o configure the dev structure with my subroutines |
| * o actually GRAB the irq. |
| * o GRAB the region |
| */ |
| static int __devinit smc911x_probe(struct net_device *dev) |
| { |
| struct smc911x_local *lp = netdev_priv(dev); |
| int i, retval; |
| unsigned int val, chip_id, revision; |
| const char *version_string; |
| unsigned long irq_flags; |
| |
| DBG(SMC_DEBUG_FUNC, "%s: --> %s\n", dev->name, __func__); |
| |
| /* First, see if the endian word is recognized */ |
| val = SMC_GET_BYTE_TEST(lp); |
| DBG(SMC_DEBUG_MISC, "%s: endian probe returned 0x%04x\n", CARDNAME, val); |
| if (val != 0x87654321) { |
| printk(KERN_ERR "Invalid chip endian 0x%08x\n",val); |
| retval = -ENODEV; |
| goto err_out; |
| } |
| |
| /* |
| * check if the revision register is something that I |
| * recognize. These might need to be added to later, |
| * as future revisions could be added. |
| */ |
| chip_id = SMC_GET_PN(lp); |
| DBG(SMC_DEBUG_MISC, "%s: id probe returned 0x%04x\n", CARDNAME, chip_id); |
| for(i=0;chip_ids[i].id != 0; i++) { |
| if (chip_ids[i].id == chip_id) break; |
| } |
| if (!chip_ids[i].id) { |
| printk(KERN_ERR "Unknown chip ID %04x\n", chip_id); |
| retval = -ENODEV; |
| goto err_out; |
| } |
| version_string = chip_ids[i].name; |
| |
| revision = SMC_GET_REV(lp); |
| DBG(SMC_DEBUG_MISC, "%s: revision = 0x%04x\n", CARDNAME, revision); |
| |
| /* At this point I'll assume that the chip is an SMC911x. */ |
| DBG(SMC_DEBUG_MISC, "%s: Found a %s\n", CARDNAME, chip_ids[i].name); |
| |
| /* Validate the TX FIFO size requested */ |
| if ((tx_fifo_kb < 2) || (tx_fifo_kb > 14)) { |
| printk(KERN_ERR "Invalid TX FIFO size requested %d\n", tx_fifo_kb); |
| retval = -EINVAL; |
| goto err_out; |
| } |
| |
| /* fill in some of the fields */ |
| lp->version = chip_ids[i].id; |
| lp->revision = revision; |
| lp->tx_fifo_kb = tx_fifo_kb; |
| /* Reverse calculate the RX FIFO size from the TX */ |
| lp->tx_fifo_size=(lp->tx_fifo_kb<<10) - 512; |
| lp->rx_fifo_size= ((0x4000 - 512 - lp->tx_fifo_size) / 16) * 15; |
| |
| /* Set the automatic flow control values */ |
| switch(lp->tx_fifo_kb) { |
| /* |
| * AFC_HI is about ((Rx Data Fifo Size)*2/3)/64 |
| * AFC_LO is AFC_HI/2 |
| * BACK_DUR is about 5uS*(AFC_LO) rounded down |
| */ |
| case 2:/* 13440 Rx Data Fifo Size */ |
| lp->afc_cfg=0x008C46AF;break; |
| case 3:/* 12480 Rx Data Fifo Size */ |
| lp->afc_cfg=0x0082419F;break; |
| case 4:/* 11520 Rx Data Fifo Size */ |
| lp->afc_cfg=0x00783C9F;break; |
| case 5:/* 10560 Rx Data Fifo Size */ |
| lp->afc_cfg=0x006E374F;break; |
| case 6:/* 9600 Rx Data Fifo Size */ |
| lp->afc_cfg=0x0064328F;break; |
| case 7:/* 8640 Rx Data Fifo Size */ |
| lp->afc_cfg=0x005A2D7F;break; |
| case 8:/* 7680 Rx Data Fifo Size */ |
| lp->afc_cfg=0x0050287F;break; |
| case 9:/* 6720 Rx Data Fifo Size */ |
| lp->afc_cfg=0x0046236F;break; |
| case 10:/* 5760 Rx Data Fifo Size */ |
| lp->afc_cfg=0x003C1E6F;break; |
| case 11:/* 4800 Rx Data Fifo Size */ |
| lp->afc_cfg=0x0032195F;break; |
| /* |
| * AFC_HI is ~1520 bytes less than RX Data Fifo Size |
| * AFC_LO is AFC_HI/2 |
| * BACK_DUR is about 5uS*(AFC_LO) rounded down |
| */ |
| case 12:/* 3840 Rx Data Fifo Size */ |
| lp->afc_cfg=0x0024124F;break; |
| case 13:/* 2880 Rx Data Fifo Size */ |
| lp->afc_cfg=0x0015073F;break; |
| case 14:/* 1920 Rx Data Fifo Size */ |
| lp->afc_cfg=0x0006032F;break; |
| default: |
| PRINTK("%s: ERROR -- no AFC_CFG setting found", |
| dev->name); |
| break; |
| } |
| |
| DBG(SMC_DEBUG_MISC | SMC_DEBUG_TX | SMC_DEBUG_RX, |
| "%s: tx_fifo %d rx_fifo %d afc_cfg 0x%08x\n", CARDNAME, |
| lp->tx_fifo_size, lp->rx_fifo_size, lp->afc_cfg); |
| |
| spin_lock_init(&lp->lock); |
| |
| /* Get the MAC address */ |
| SMC_GET_MAC_ADDR(lp, dev->dev_addr); |
| |
| /* now, reset the chip, and put it into a known state */ |
| smc911x_reset(dev); |
| |
| /* |
| * If dev->irq is 0, then the device has to be banged on to see |
| * what the IRQ is. |
| * |
| * Specifying an IRQ is done with the assumption that the user knows |
| * what (s)he is doing. No checking is done!!!! |
| */ |
| if (dev->irq < 1) { |
| int trials; |
| |
| trials = 3; |
| while (trials--) { |
| dev->irq = smc911x_findirq(dev); |
| if (dev->irq) |
| break; |
| /* kick the card and try again */ |
| smc911x_reset(dev); |
| } |
| } |
| if (dev->irq == 0) { |
| printk("%s: Couldn't autodetect your IRQ. Use irq=xx.\n", |
| dev->name); |
| retval = -ENODEV; |
| goto err_out; |
| } |
| dev->irq = irq_canonicalize(dev->irq); |
| |
| /* Fill in the fields of the device structure with ethernet values. */ |
| ether_setup(dev); |
| |
| dev->netdev_ops = &smc911x_netdev_ops; |
| dev->watchdog_timeo = msecs_to_jiffies(watchdog); |
| dev->ethtool_ops = &smc911x_ethtool_ops; |
| |
| INIT_WORK(&lp->phy_configure, smc911x_phy_configure); |
| lp->mii.phy_id_mask = 0x1f; |
| lp->mii.reg_num_mask = 0x1f; |
| lp->mii.force_media = 0; |
| lp->mii.full_duplex = 0; |
| lp->mii.dev = dev; |
| lp->mii.mdio_read = smc911x_phy_read; |
| lp->mii.mdio_write = smc911x_phy_write; |
| |
| /* |
| * Locate the phy, if any. |
| */ |
| smc911x_phy_detect(dev); |
| |
| /* Set default parameters */ |
| lp->msg_enable = NETIF_MSG_LINK; |
| lp->ctl_rfduplx = 1; |
| lp->ctl_rspeed = 100; |
| |
| #ifdef SMC_DYNAMIC_BUS_CONFIG |
| irq_flags = lp->cfg.irq_flags; |
| #else |
| irq_flags = IRQF_SHARED | SMC_IRQ_SENSE; |
| #endif |
| |
| /* Grab the IRQ */ |
| retval = request_irq(dev->irq, smc911x_interrupt, |
| irq_flags, dev->name, dev); |
| if (retval) |
| goto err_out; |
| |
| #ifdef SMC_USE_DMA |
| lp->rxdma = SMC_DMA_REQUEST(dev, smc911x_rx_dma_irq); |
| lp->txdma = SMC_DMA_REQUEST(dev, smc911x_tx_dma_irq); |
| lp->rxdma_active = 0; |
| lp->txdma_active = 0; |
| dev->dma = lp->rxdma; |
| #endif |
| |
| retval = register_netdev(dev); |
| if (retval == 0) { |
| /* now, print out the card info, in a short format.. */ |
| printk("%s: %s (rev %d) at %#lx IRQ %d", |
| dev->name, version_string, lp->revision, |
| dev->base_addr, dev->irq); |
| |
| #ifdef SMC_USE_DMA |
| if (lp->rxdma != -1) |
| printk(" RXDMA %d ", lp->rxdma); |
| |
| if (lp->txdma != -1) |
| printk("TXDMA %d", lp->txdma); |
| #endif |
| printk("\n"); |
| if (!is_valid_ether_addr(dev->dev_addr)) { |
| printk("%s: Invalid ethernet MAC address. Please " |
| "set using ifconfig\n", dev->name); |
| } else { |
| /* Print the Ethernet address */ |
| printk("%s: Ethernet addr: %pM\n", |
| dev->name, dev->dev_addr); |
| } |
| |
| if (lp->phy_type == 0) { |
| PRINTK("%s: No PHY found\n", dev->name); |
| } else if ((lp->phy_type & ~0xff) == LAN911X_INTERNAL_PHY_ID) { |
| PRINTK("%s: LAN911x Internal PHY\n", dev->name); |
| } else { |
| PRINTK("%s: External PHY 0x%08x\n", dev->name, lp->phy_type); |
| } |
| } |
| |
| err_out: |
| #ifdef SMC_USE_DMA |
| if (retval) { |
| if (lp->rxdma != -1) { |
| SMC_DMA_FREE(dev, lp->rxdma); |
| } |
| if (lp->txdma != -1) { |
| SMC_DMA_FREE(dev, lp->txdma); |
| } |
| } |
| #endif |
| return retval; |
| } |
| |
| /* |
| * smc911x_init(void) |
| * |
| * Output: |
| * 0 --> there is a device |
| * anything else, error |
| */ |
| static int __devinit smc911x_drv_probe(struct platform_device *pdev) |
| { |
| struct net_device *ndev; |
| struct resource *res; |
| struct smc911x_local *lp; |
| unsigned int *addr; |
| int ret; |
| |
| DBG(SMC_DEBUG_FUNC, "--> %s\n", __func__); |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (!res) { |
| ret = -ENODEV; |
| goto out; |
| } |
| |
| /* |
| * Request the regions. |
| */ |
| if (!request_mem_region(res->start, SMC911X_IO_EXTENT, CARDNAME)) { |
| ret = -EBUSY; |
| goto out; |
| } |
| |
| ndev = alloc_etherdev(sizeof(struct smc911x_local)); |
| if (!ndev) { |
| printk("%s: could not allocate device.\n", CARDNAME); |
| ret = -ENOMEM; |
| goto release_1; |
| } |
| SET_NETDEV_DEV(ndev, &pdev->dev); |
| |
| ndev->dma = (unsigned char)-1; |
| ndev->irq = platform_get_irq(pdev, 0); |
| lp = netdev_priv(ndev); |
| lp->netdev = ndev; |
| #ifdef SMC_DYNAMIC_BUS_CONFIG |
| { |
| struct smc911x_platdata *pd = pdev->dev.platform_data; |
| if (!pd) { |
| ret = -EINVAL; |
| goto release_both; |
| } |
| memcpy(&lp->cfg, pd, sizeof(lp->cfg)); |
| } |
| #endif |
| |
| addr = ioremap(res->start, SMC911X_IO_EXTENT); |
| if (!addr) { |
| ret = -ENOMEM; |
| goto release_both; |
| } |
| |
| platform_set_drvdata(pdev, ndev); |
| lp->base = addr; |
| ndev->base_addr = res->start; |
| ret = smc911x_probe(ndev); |
| if (ret != 0) { |
| platform_set_drvdata(pdev, NULL); |
| iounmap(addr); |
| release_both: |
| free_netdev(ndev); |
| release_1: |
| release_mem_region(res->start, SMC911X_IO_EXTENT); |
| out: |
| printk("%s: not found (%d).\n", CARDNAME, ret); |
| } |
| #ifdef SMC_USE_DMA |
| else { |
| lp->physaddr = res->start; |
| lp->dev = &pdev->dev; |
| } |
| #endif |
| |
| return ret; |
| } |
| |
| static int __devexit smc911x_drv_remove(struct platform_device *pdev) |
| { |
| struct net_device *ndev = platform_get_drvdata(pdev); |
| struct smc911x_local *lp = netdev_priv(ndev); |
| struct resource *res; |
| |
| DBG(SMC_DEBUG_FUNC, "--> %s\n", __func__); |
| platform_set_drvdata(pdev, NULL); |
| |
| unregister_netdev(ndev); |
| |
| free_irq(ndev->irq, ndev); |
| |
| #ifdef SMC_USE_DMA |
| { |
| if (lp->rxdma != -1) { |
| SMC_DMA_FREE(dev, lp->rxdma); |
| } |
| if (lp->txdma != -1) { |
| SMC_DMA_FREE(dev, lp->txdma); |
| } |
| } |
| #endif |
| iounmap(lp->base); |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| release_mem_region(res->start, SMC911X_IO_EXTENT); |
| |
| free_netdev(ndev); |
| return 0; |
| } |
| |
| static int smc911x_drv_suspend(struct platform_device *dev, pm_message_t state) |
| { |
| struct net_device *ndev = platform_get_drvdata(dev); |
| struct smc911x_local *lp = netdev_priv(ndev); |
| |
| DBG(SMC_DEBUG_FUNC, "--> %s\n", __func__); |
| if (ndev) { |
| if (netif_running(ndev)) { |
| netif_device_detach(ndev); |
| smc911x_shutdown(ndev); |
| #if POWER_DOWN |
| /* Set D2 - Energy detect only setting */ |
| SMC_SET_PMT_CTRL(lp, 2<<12); |
| #endif |
| } |
| } |
| return 0; |
| } |
| |
| static int smc911x_drv_resume(struct platform_device *dev) |
| { |
| struct net_device *ndev = platform_get_drvdata(dev); |
| |
| DBG(SMC_DEBUG_FUNC, "--> %s\n", __func__); |
| if (ndev) { |
| struct smc911x_local *lp = netdev_priv(ndev); |
| |
| if (netif_running(ndev)) { |
| smc911x_reset(ndev); |
| if (lp->phy_type != 0) |
| smc911x_phy_configure(&lp->phy_configure); |
| smc911x_enable(ndev); |
| netif_device_attach(ndev); |
| } |
| } |
| return 0; |
| } |
| |
| static struct platform_driver smc911x_driver = { |
| .probe = smc911x_drv_probe, |
| .remove = __devexit_p(smc911x_drv_remove), |
| .suspend = smc911x_drv_suspend, |
| .resume = smc911x_drv_resume, |
| .driver = { |
| .name = CARDNAME, |
| .owner = THIS_MODULE, |
| }, |
| }; |
| |
| static int __init smc911x_init(void) |
| { |
| return platform_driver_register(&smc911x_driver); |
| } |
| |
| static void __exit smc911x_cleanup(void) |
| { |
| platform_driver_unregister(&smc911x_driver); |
| } |
| |
| module_init(smc911x_init); |
| module_exit(smc911x_cleanup); |