| /* |
| * linux/drivers/s390/cio/qdio_main.c |
| * |
| * Linux for s390 qdio support, buffer handling, qdio API and module support. |
| * |
| * Copyright 2000,2008 IBM Corp. |
| * Author(s): Utz Bacher <utz.bacher@de.ibm.com> |
| * Jan Glauber <jang@linux.vnet.ibm.com> |
| * 2.6 cio integration by Cornelia Huck <cornelia.huck@de.ibm.com> |
| */ |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/timer.h> |
| #include <linux/delay.h> |
| #include <asm/atomic.h> |
| #include <asm/debug.h> |
| #include <asm/qdio.h> |
| |
| #include "cio.h" |
| #include "css.h" |
| #include "device.h" |
| #include "qdio.h" |
| #include "qdio_debug.h" |
| #include "qdio_perf.h" |
| |
| MODULE_AUTHOR("Utz Bacher <utz.bacher@de.ibm.com>,"\ |
| "Jan Glauber <jang@linux.vnet.ibm.com>"); |
| MODULE_DESCRIPTION("QDIO base support"); |
| MODULE_LICENSE("GPL"); |
| |
| static inline int do_siga_sync(struct subchannel_id schid, |
| unsigned int out_mask, unsigned int in_mask) |
| { |
| register unsigned long __fc asm ("0") = 2; |
| register struct subchannel_id __schid asm ("1") = schid; |
| register unsigned long out asm ("2") = out_mask; |
| register unsigned long in asm ("3") = in_mask; |
| int cc; |
| |
| asm volatile( |
| " siga 0\n" |
| " ipm %0\n" |
| " srl %0,28\n" |
| : "=d" (cc) |
| : "d" (__fc), "d" (__schid), "d" (out), "d" (in) : "cc"); |
| return cc; |
| } |
| |
| static inline int do_siga_input(struct subchannel_id schid, unsigned int mask) |
| { |
| register unsigned long __fc asm ("0") = 1; |
| register struct subchannel_id __schid asm ("1") = schid; |
| register unsigned long __mask asm ("2") = mask; |
| int cc; |
| |
| asm volatile( |
| " siga 0\n" |
| " ipm %0\n" |
| " srl %0,28\n" |
| : "=d" (cc) |
| : "d" (__fc), "d" (__schid), "d" (__mask) : "cc", "memory"); |
| return cc; |
| } |
| |
| /** |
| * do_siga_output - perform SIGA-w/wt function |
| * @schid: subchannel id or in case of QEBSM the subchannel token |
| * @mask: which output queues to process |
| * @bb: busy bit indicator, set only if SIGA-w/wt could not access a buffer |
| * @fc: function code to perform |
| * |
| * Returns cc or QDIO_ERROR_SIGA_ACCESS_EXCEPTION. |
| * Note: For IQDC unicast queues only the highest priority queue is processed. |
| */ |
| static inline int do_siga_output(unsigned long schid, unsigned long mask, |
| u32 *bb, unsigned int fc) |
| { |
| register unsigned long __fc asm("0") = fc; |
| register unsigned long __schid asm("1") = schid; |
| register unsigned long __mask asm("2") = mask; |
| int cc = QDIO_ERROR_SIGA_ACCESS_EXCEPTION; |
| |
| asm volatile( |
| " siga 0\n" |
| "0: ipm %0\n" |
| " srl %0,28\n" |
| "1:\n" |
| EX_TABLE(0b, 1b) |
| : "+d" (cc), "+d" (__fc), "+d" (__schid), "+d" (__mask) |
| : : "cc", "memory"); |
| *bb = ((unsigned int) __fc) >> 31; |
| return cc; |
| } |
| |
| static inline int qdio_check_ccq(struct qdio_q *q, unsigned int ccq) |
| { |
| char dbf_text[15]; |
| |
| /* all done or next buffer state different */ |
| if (ccq == 0 || ccq == 32) |
| return 0; |
| /* not all buffers processed */ |
| if (ccq == 96 || ccq == 97) |
| return 1; |
| /* notify devices immediately */ |
| sprintf(dbf_text, "%d", ccq); |
| QDIO_DBF_TEXT2(1, trace, dbf_text); |
| return -EIO; |
| } |
| |
| /** |
| * qdio_do_eqbs - extract buffer states for QEBSM |
| * @q: queue to manipulate |
| * @state: state of the extracted buffers |
| * @start: buffer number to start at |
| * @count: count of buffers to examine |
| * |
| * Returns the number of successfull extracted equal buffer states. |
| * Stops processing if a state is different from the last buffers state. |
| */ |
| static int qdio_do_eqbs(struct qdio_q *q, unsigned char *state, |
| int start, int count) |
| { |
| unsigned int ccq = 0; |
| int tmp_count = count, tmp_start = start; |
| int nr = q->nr; |
| int rc; |
| char dbf_text[15]; |
| |
| BUG_ON(!q->irq_ptr->sch_token); |
| |
| if (!q->is_input_q) |
| nr += q->irq_ptr->nr_input_qs; |
| again: |
| ccq = do_eqbs(q->irq_ptr->sch_token, state, nr, &tmp_start, &tmp_count); |
| rc = qdio_check_ccq(q, ccq); |
| |
| /* At least one buffer was processed, return and extract the remaining |
| * buffers later. |
| */ |
| if ((ccq == 96) && (count != tmp_count)) |
| return (count - tmp_count); |
| if (rc == 1) { |
| QDIO_DBF_TEXT5(1, trace, "eqAGAIN"); |
| goto again; |
| } |
| |
| if (rc < 0) { |
| QDIO_DBF_TEXT2(1, trace, "eqberr"); |
| sprintf(dbf_text, "%2x,%2x,%d,%d", count, tmp_count, ccq, nr); |
| QDIO_DBF_TEXT2(1, trace, dbf_text); |
| q->handler(q->irq_ptr->cdev, |
| QDIO_ERROR_ACTIVATE_CHECK_CONDITION, |
| 0, -1, -1, q->irq_ptr->int_parm); |
| return 0; |
| } |
| return count - tmp_count; |
| } |
| |
| /** |
| * qdio_do_sqbs - set buffer states for QEBSM |
| * @q: queue to manipulate |
| * @state: new state of the buffers |
| * @start: first buffer number to change |
| * @count: how many buffers to change |
| * |
| * Returns the number of successfully changed buffers. |
| * Does retrying until the specified count of buffer states is set or an |
| * error occurs. |
| */ |
| static int qdio_do_sqbs(struct qdio_q *q, unsigned char state, int start, |
| int count) |
| { |
| unsigned int ccq = 0; |
| int tmp_count = count, tmp_start = start; |
| int nr = q->nr; |
| int rc; |
| char dbf_text[15]; |
| |
| BUG_ON(!q->irq_ptr->sch_token); |
| |
| if (!q->is_input_q) |
| nr += q->irq_ptr->nr_input_qs; |
| again: |
| ccq = do_sqbs(q->irq_ptr->sch_token, state, nr, &tmp_start, &tmp_count); |
| rc = qdio_check_ccq(q, ccq); |
| if (rc == 1) { |
| QDIO_DBF_TEXT5(1, trace, "sqAGAIN"); |
| goto again; |
| } |
| if (rc < 0) { |
| QDIO_DBF_TEXT3(1, trace, "sqberr"); |
| sprintf(dbf_text, "%2x,%2x", count, tmp_count); |
| QDIO_DBF_TEXT3(1, trace, dbf_text); |
| sprintf(dbf_text, "%d,%d", ccq, nr); |
| QDIO_DBF_TEXT3(1, trace, dbf_text); |
| |
| q->handler(q->irq_ptr->cdev, |
| QDIO_ERROR_ACTIVATE_CHECK_CONDITION, |
| 0, -1, -1, q->irq_ptr->int_parm); |
| return 0; |
| } |
| WARN_ON(tmp_count); |
| return count - tmp_count; |
| } |
| |
| /* returns number of examined buffers and their common state in *state */ |
| static inline int get_buf_states(struct qdio_q *q, unsigned int bufnr, |
| unsigned char *state, unsigned int count) |
| { |
| unsigned char __state = 0; |
| int i; |
| |
| BUG_ON(bufnr > QDIO_MAX_BUFFERS_MASK); |
| BUG_ON(count > QDIO_MAX_BUFFERS_PER_Q); |
| |
| if (is_qebsm(q)) |
| return qdio_do_eqbs(q, state, bufnr, count); |
| |
| for (i = 0; i < count; i++) { |
| if (!__state) |
| __state = q->slsb.val[bufnr]; |
| else if (q->slsb.val[bufnr] != __state) |
| break; |
| bufnr = next_buf(bufnr); |
| } |
| *state = __state; |
| return i; |
| } |
| |
| inline int get_buf_state(struct qdio_q *q, unsigned int bufnr, |
| unsigned char *state) |
| { |
| return get_buf_states(q, bufnr, state, 1); |
| } |
| |
| /* wrap-around safe setting of slsb states, returns number of changed buffers */ |
| static inline int set_buf_states(struct qdio_q *q, int bufnr, |
| unsigned char state, int count) |
| { |
| int i; |
| |
| BUG_ON(bufnr > QDIO_MAX_BUFFERS_MASK); |
| BUG_ON(count > QDIO_MAX_BUFFERS_PER_Q); |
| |
| if (is_qebsm(q)) |
| return qdio_do_sqbs(q, state, bufnr, count); |
| |
| for (i = 0; i < count; i++) { |
| xchg(&q->slsb.val[bufnr], state); |
| bufnr = next_buf(bufnr); |
| } |
| return count; |
| } |
| |
| static inline int set_buf_state(struct qdio_q *q, int bufnr, |
| unsigned char state) |
| { |
| return set_buf_states(q, bufnr, state, 1); |
| } |
| |
| /* set slsb states to initial state */ |
| void qdio_init_buf_states(struct qdio_irq *irq_ptr) |
| { |
| struct qdio_q *q; |
| int i; |
| |
| for_each_input_queue(irq_ptr, q, i) |
| set_buf_states(q, 0, SLSB_P_INPUT_NOT_INIT, |
| QDIO_MAX_BUFFERS_PER_Q); |
| for_each_output_queue(irq_ptr, q, i) |
| set_buf_states(q, 0, SLSB_P_OUTPUT_NOT_INIT, |
| QDIO_MAX_BUFFERS_PER_Q); |
| } |
| |
| static int qdio_siga_sync(struct qdio_q *q, unsigned int output, |
| unsigned int input) |
| { |
| int cc; |
| |
| if (!need_siga_sync(q)) |
| return 0; |
| |
| qdio_perf_stat_inc(&perf_stats.siga_sync); |
| |
| cc = do_siga_sync(q->irq_ptr->schid, output, input); |
| if (cc) { |
| QDIO_DBF_TEXT4(0, trace, "sigasync"); |
| QDIO_DBF_HEX4(0, trace, &q, sizeof(void *)); |
| QDIO_DBF_HEX3(0, trace, &cc, sizeof(int *)); |
| } |
| return cc; |
| } |
| |
| inline int qdio_siga_sync_q(struct qdio_q *q) |
| { |
| if (q->is_input_q) |
| return qdio_siga_sync(q, 0, q->mask); |
| else |
| return qdio_siga_sync(q, q->mask, 0); |
| } |
| |
| static inline int qdio_siga_sync_out(struct qdio_q *q) |
| { |
| return qdio_siga_sync(q, ~0U, 0); |
| } |
| |
| static inline int qdio_siga_sync_all(struct qdio_q *q) |
| { |
| return qdio_siga_sync(q, ~0U, ~0U); |
| } |
| |
| static inline int qdio_do_siga_output(struct qdio_q *q, unsigned int *busy_bit) |
| { |
| unsigned int fc = 0; |
| unsigned long schid; |
| |
| if (q->u.out.use_enh_siga) { |
| fc = 3; |
| } |
| if (!is_qebsm(q)) |
| schid = *((u32 *)&q->irq_ptr->schid); |
| else { |
| schid = q->irq_ptr->sch_token; |
| fc |= 0x80; |
| } |
| return do_siga_output(schid, q->mask, busy_bit, fc); |
| } |
| |
| static int qdio_siga_output(struct qdio_q *q) |
| { |
| int cc; |
| u32 busy_bit; |
| u64 start_time = 0; |
| char dbf_text[15]; |
| |
| QDIO_DBF_TEXT5(0, trace, "sigaout"); |
| QDIO_DBF_HEX5(0, trace, &q, sizeof(void *)); |
| |
| qdio_perf_stat_inc(&perf_stats.siga_out); |
| again: |
| cc = qdio_do_siga_output(q, &busy_bit); |
| if (queue_type(q) == QDIO_IQDIO_QFMT && cc == 2 && busy_bit) { |
| sprintf(dbf_text, "bb%4x%2x", q->irq_ptr->schid.sch_no, q->nr); |
| QDIO_DBF_TEXT3(0, trace, dbf_text); |
| |
| if (!start_time) |
| start_time = get_usecs(); |
| else if ((get_usecs() - start_time) < QDIO_BUSY_BIT_PATIENCE) |
| goto again; |
| } |
| |
| if (cc == 2 && busy_bit) |
| cc |= QDIO_ERROR_SIGA_BUSY; |
| if (cc) |
| QDIO_DBF_HEX3(0, trace, &cc, sizeof(int *)); |
| return cc; |
| } |
| |
| static inline int qdio_siga_input(struct qdio_q *q) |
| { |
| int cc; |
| |
| QDIO_DBF_TEXT4(0, trace, "sigain"); |
| QDIO_DBF_HEX4(0, trace, &q, sizeof(void *)); |
| |
| qdio_perf_stat_inc(&perf_stats.siga_in); |
| |
| cc = do_siga_input(q->irq_ptr->schid, q->mask); |
| if (cc) |
| QDIO_DBF_HEX3(0, trace, &cc, sizeof(int *)); |
| return cc; |
| } |
| |
| /* called from thinint inbound handler */ |
| void qdio_sync_after_thinint(struct qdio_q *q) |
| { |
| if (pci_out_supported(q)) { |
| if (need_siga_sync_thinint(q)) |
| qdio_siga_sync_all(q); |
| else if (need_siga_sync_out_thinint(q)) |
| qdio_siga_sync_out(q); |
| } else |
| qdio_siga_sync_q(q); |
| } |
| |
| inline void qdio_stop_polling(struct qdio_q *q) |
| { |
| spin_lock_bh(&q->u.in.lock); |
| if (!q->u.in.polling) { |
| spin_unlock_bh(&q->u.in.lock); |
| return; |
| } |
| q->u.in.polling = 0; |
| qdio_perf_stat_inc(&perf_stats.debug_stop_polling); |
| |
| /* show the card that we are not polling anymore */ |
| set_buf_state(q, q->last_move_ftc, SLSB_P_INPUT_NOT_INIT); |
| spin_unlock_bh(&q->u.in.lock); |
| } |
| |
| static void announce_buffer_error(struct qdio_q *q) |
| { |
| char dbf_text[15]; |
| |
| if (q->is_input_q) |
| QDIO_DBF_TEXT3(1, trace, "inperr"); |
| else |
| QDIO_DBF_TEXT3(0, trace, "outperr"); |
| |
| sprintf(dbf_text, "%x-%x-%x", q->first_to_check, |
| q->sbal[q->first_to_check]->element[14].flags, |
| q->sbal[q->first_to_check]->element[15].flags); |
| QDIO_DBF_TEXT3(1, trace, dbf_text); |
| QDIO_DBF_HEX2(1, trace, q->sbal[q->first_to_check], 256); |
| |
| q->qdio_error = QDIO_ERROR_SLSB_STATE; |
| } |
| |
| static int get_inbound_buffer_frontier(struct qdio_q *q) |
| { |
| int count, stop; |
| unsigned char state; |
| |
| /* |
| * If we still poll don't update last_move_ftc, keep the |
| * previously ACK buffer there. |
| */ |
| if (!q->u.in.polling) |
| q->last_move_ftc = q->first_to_check; |
| |
| /* |
| * Don't check 128 buffers, as otherwise qdio_inbound_q_moved |
| * would return 0. |
| */ |
| count = min(atomic_read(&q->nr_buf_used), QDIO_MAX_BUFFERS_MASK); |
| stop = add_buf(q->first_to_check, count); |
| |
| /* |
| * No siga sync here, as a PCI or we after a thin interrupt |
| * will sync the queues. |
| */ |
| |
| /* need to set count to 1 for non-qebsm */ |
| if (!is_qebsm(q)) |
| count = 1; |
| |
| check_next: |
| if (q->first_to_check == stop) |
| goto out; |
| |
| count = get_buf_states(q, q->first_to_check, &state, count); |
| if (!count) |
| goto out; |
| |
| switch (state) { |
| case SLSB_P_INPUT_PRIMED: |
| QDIO_DBF_TEXT5(0, trace, "inptprim"); |
| |
| /* |
| * Only ACK the first buffer. The ACK will be removed in |
| * qdio_stop_polling. |
| */ |
| if (q->u.in.polling) |
| state = SLSB_P_INPUT_NOT_INIT; |
| else { |
| q->u.in.polling = 1; |
| state = SLSB_P_INPUT_ACK; |
| } |
| set_buf_state(q, q->first_to_check, state); |
| |
| /* |
| * Need to change all PRIMED buffers to NOT_INIT, otherwise |
| * we're loosing initiative in the thinint code. |
| */ |
| if (count > 1) |
| set_buf_states(q, next_buf(q->first_to_check), |
| SLSB_P_INPUT_NOT_INIT, count - 1); |
| |
| /* |
| * No siga-sync needed for non-qebsm here, as the inbound queue |
| * will be synced on the next siga-r, resp. |
| * tiqdio_is_inbound_q_done will do the siga-sync. |
| */ |
| q->first_to_check = add_buf(q->first_to_check, count); |
| atomic_sub(count, &q->nr_buf_used); |
| goto check_next; |
| case SLSB_P_INPUT_ERROR: |
| announce_buffer_error(q); |
| /* process the buffer, the upper layer will take care of it */ |
| q->first_to_check = add_buf(q->first_to_check, count); |
| atomic_sub(count, &q->nr_buf_used); |
| break; |
| case SLSB_CU_INPUT_EMPTY: |
| case SLSB_P_INPUT_NOT_INIT: |
| case SLSB_P_INPUT_ACK: |
| QDIO_DBF_TEXT5(0, trace, "inpnipro"); |
| break; |
| default: |
| BUG(); |
| } |
| out: |
| QDIO_DBF_HEX4(0, trace, &q->first_to_check, sizeof(int)); |
| return q->first_to_check; |
| } |
| |
| int qdio_inbound_q_moved(struct qdio_q *q) |
| { |
| int bufnr; |
| |
| bufnr = get_inbound_buffer_frontier(q); |
| |
| if ((bufnr != q->last_move_ftc) || q->qdio_error) { |
| if (!need_siga_sync(q) && !pci_out_supported(q)) |
| q->u.in.timestamp = get_usecs(); |
| |
| QDIO_DBF_TEXT4(0, trace, "inhasmvd"); |
| QDIO_DBF_HEX4(0, trace, &q, sizeof(void *)); |
| return 1; |
| } else |
| return 0; |
| } |
| |
| static int qdio_inbound_q_done(struct qdio_q *q) |
| { |
| unsigned char state; |
| #ifdef CONFIG_QDIO_DEBUG |
| char dbf_text[15]; |
| #endif |
| |
| if (!atomic_read(&q->nr_buf_used)) |
| return 1; |
| |
| /* |
| * We need that one for synchronization with the adapter, as it |
| * does a kind of PCI avoidance. |
| */ |
| qdio_siga_sync_q(q); |
| |
| get_buf_state(q, q->first_to_check, &state); |
| if (state == SLSB_P_INPUT_PRIMED) |
| /* we got something to do */ |
| return 0; |
| |
| /* on VM, we don't poll, so the q is always done here */ |
| if (need_siga_sync(q) || pci_out_supported(q)) |
| return 1; |
| |
| /* |
| * At this point we know, that inbound first_to_check |
| * has (probably) not moved (see qdio_inbound_processing). |
| */ |
| if (get_usecs() > q->u.in.timestamp + QDIO_INPUT_THRESHOLD) { |
| #ifdef CONFIG_QDIO_DEBUG |
| QDIO_DBF_TEXT4(0, trace, "inqisdon"); |
| QDIO_DBF_HEX4(0, trace, &q, sizeof(void *)); |
| sprintf(dbf_text, "pf%02x", q->first_to_check); |
| QDIO_DBF_TEXT4(0, trace, dbf_text); |
| #endif /* CONFIG_QDIO_DEBUG */ |
| return 1; |
| } else { |
| #ifdef CONFIG_QDIO_DEBUG |
| QDIO_DBF_TEXT4(0, trace, "inqisntd"); |
| QDIO_DBF_HEX4(0, trace, &q, sizeof(void *)); |
| sprintf(dbf_text, "pf%02x", q->first_to_check); |
| QDIO_DBF_TEXT4(0, trace, dbf_text); |
| #endif /* CONFIG_QDIO_DEBUG */ |
| return 0; |
| } |
| } |
| |
| void qdio_kick_inbound_handler(struct qdio_q *q) |
| { |
| int count, start, end; |
| #ifdef CONFIG_QDIO_DEBUG |
| char dbf_text[15]; |
| #endif |
| |
| qdio_perf_stat_inc(&perf_stats.inbound_handler); |
| |
| start = q->first_to_kick; |
| end = q->first_to_check; |
| if (end >= start) |
| count = end - start; |
| else |
| count = end + QDIO_MAX_BUFFERS_PER_Q - start; |
| |
| #ifdef CONFIG_QDIO_DEBUG |
| sprintf(dbf_text, "s=%2xc=%2x", start, count); |
| QDIO_DBF_TEXT4(0, trace, dbf_text); |
| #endif /* CONFIG_QDIO_DEBUG */ |
| |
| if (unlikely(q->irq_ptr->state != QDIO_IRQ_STATE_ACTIVE)) |
| return; |
| |
| q->handler(q->irq_ptr->cdev, q->qdio_error, q->nr, |
| start, count, q->irq_ptr->int_parm); |
| |
| /* for the next time */ |
| q->first_to_kick = q->first_to_check; |
| q->qdio_error = 0; |
| } |
| |
| static void __qdio_inbound_processing(struct qdio_q *q) |
| { |
| qdio_perf_stat_inc(&perf_stats.tasklet_inbound); |
| again: |
| if (!qdio_inbound_q_moved(q)) |
| return; |
| |
| qdio_kick_inbound_handler(q); |
| |
| if (!qdio_inbound_q_done(q)) |
| /* means poll time is not yet over */ |
| goto again; |
| |
| qdio_stop_polling(q); |
| /* |
| * We need to check again to not lose initiative after |
| * resetting the ACK state. |
| */ |
| if (!qdio_inbound_q_done(q)) |
| goto again; |
| } |
| |
| /* inbound tasklet */ |
| void qdio_inbound_processing(unsigned long data) |
| { |
| struct qdio_q *q = (struct qdio_q *)data; |
| __qdio_inbound_processing(q); |
| } |
| |
| static int get_outbound_buffer_frontier(struct qdio_q *q) |
| { |
| int count, stop; |
| unsigned char state; |
| |
| if (((queue_type(q) != QDIO_IQDIO_QFMT) && !pci_out_supported(q)) || |
| (queue_type(q) == QDIO_IQDIO_QFMT && multicast_outbound(q))) |
| qdio_siga_sync_q(q); |
| |
| /* |
| * Don't check 128 buffers, as otherwise qdio_inbound_q_moved |
| * would return 0. |
| */ |
| count = min(atomic_read(&q->nr_buf_used), QDIO_MAX_BUFFERS_MASK); |
| stop = add_buf(q->first_to_check, count); |
| |
| /* need to set count to 1 for non-qebsm */ |
| if (!is_qebsm(q)) |
| count = 1; |
| |
| check_next: |
| if (q->first_to_check == stop) |
| return q->first_to_check; |
| |
| count = get_buf_states(q, q->first_to_check, &state, count); |
| if (!count) |
| return q->first_to_check; |
| |
| switch (state) { |
| case SLSB_P_OUTPUT_EMPTY: |
| /* the adapter got it */ |
| QDIO_DBF_TEXT5(0, trace, "outpempt"); |
| |
| atomic_sub(count, &q->nr_buf_used); |
| q->first_to_check = add_buf(q->first_to_check, count); |
| /* |
| * We fetch all buffer states at once. get_buf_states may |
| * return count < stop. For QEBSM we do not loop. |
| */ |
| if (is_qebsm(q)) |
| break; |
| goto check_next; |
| case SLSB_P_OUTPUT_ERROR: |
| announce_buffer_error(q); |
| /* process the buffer, the upper layer will take care of it */ |
| q->first_to_check = add_buf(q->first_to_check, count); |
| atomic_sub(count, &q->nr_buf_used); |
| break; |
| case SLSB_CU_OUTPUT_PRIMED: |
| /* the adapter has not fetched the output yet */ |
| QDIO_DBF_TEXT5(0, trace, "outpprim"); |
| break; |
| case SLSB_P_OUTPUT_NOT_INIT: |
| case SLSB_P_OUTPUT_HALTED: |
| break; |
| default: |
| BUG(); |
| } |
| return q->first_to_check; |
| } |
| |
| /* all buffers processed? */ |
| static inline int qdio_outbound_q_done(struct qdio_q *q) |
| { |
| return atomic_read(&q->nr_buf_used) == 0; |
| } |
| |
| static inline int qdio_outbound_q_moved(struct qdio_q *q) |
| { |
| int bufnr; |
| |
| bufnr = get_outbound_buffer_frontier(q); |
| |
| if ((bufnr != q->last_move_ftc) || q->qdio_error) { |
| q->last_move_ftc = bufnr; |
| QDIO_DBF_TEXT4(0, trace, "oqhasmvd"); |
| QDIO_DBF_HEX4(0, trace, &q, sizeof(void *)); |
| return 1; |
| } else |
| return 0; |
| } |
| |
| /* |
| * VM could present us cc=2 and busy bit set on SIGA-write |
| * during reconfiguration of their Guest LAN (only in iqdio mode, |
| * otherwise qdio is asynchronous and cc=2 and busy bit there will take |
| * the queues down immediately). |
| * |
| * Therefore qdio_siga_output will try for a short time constantly, |
| * if such a condition occurs. If it doesn't change, it will |
| * increase the busy_siga_counter and save the timestamp, and |
| * schedule the queue for later processing. qdio_outbound_processing |
| * will check out the counter. If non-zero, it will call qdio_kick_outbound_q |
| * as often as the value of the counter. This will attempt further SIGA |
| * instructions. For each successful SIGA, the counter is |
| * decreased, for failing SIGAs the counter remains the same, after |
| * all. After some time of no movement, qdio_kick_outbound_q will |
| * finally fail and reflect corresponding error codes to call |
| * the upper layer module and have it take the queues down. |
| * |
| * Note that this is a change from the original HiperSockets design |
| * (saying cc=2 and busy bit means take the queues down), but in |
| * these days Guest LAN didn't exist... excessive cc=2 with busy bit |
| * conditions will still take the queues down, but the threshold is |
| * higher due to the Guest LAN environment. |
| * |
| * Called from outbound tasklet and do_QDIO handler. |
| */ |
| static void qdio_kick_outbound_q(struct qdio_q *q) |
| { |
| int rc; |
| #ifdef CONFIG_QDIO_DEBUG |
| char dbf_text[15]; |
| |
| QDIO_DBF_TEXT5(0, trace, "kickoutq"); |
| QDIO_DBF_HEX5(0, trace, &q, sizeof(void *)); |
| #endif /* CONFIG_QDIO_DEBUG */ |
| |
| if (!need_siga_out(q)) |
| return; |
| |
| rc = qdio_siga_output(q); |
| switch (rc) { |
| case 0: |
| /* TODO: improve error handling for CC=0 case */ |
| #ifdef CONFIG_QDIO_DEBUG |
| if (q->u.out.timestamp) { |
| QDIO_DBF_TEXT3(0, trace, "cc2reslv"); |
| sprintf(dbf_text, "%4x%2x%2x", q->irq_ptr->schid.sch_no, |
| q->nr, |
| atomic_read(&q->u.out.busy_siga_counter)); |
| QDIO_DBF_TEXT3(0, trace, dbf_text); |
| } |
| #endif /* CONFIG_QDIO_DEBUG */ |
| /* went smooth this time, reset timestamp */ |
| q->u.out.timestamp = 0; |
| break; |
| /* cc=2 and busy bit */ |
| case (2 | QDIO_ERROR_SIGA_BUSY): |
| atomic_inc(&q->u.out.busy_siga_counter); |
| |
| /* if the last siga was successful, save timestamp here */ |
| if (!q->u.out.timestamp) |
| q->u.out.timestamp = get_usecs(); |
| |
| /* if we're in time, don't touch qdio_error */ |
| if (get_usecs() - q->u.out.timestamp < QDIO_BUSY_BIT_GIVE_UP) { |
| tasklet_schedule(&q->tasklet); |
| break; |
| } |
| QDIO_DBF_TEXT2(0, trace, "cc2REPRT"); |
| #ifdef CONFIG_QDIO_DEBUG |
| sprintf(dbf_text, "%4x%2x%2x", q->irq_ptr->schid.sch_no, q->nr, |
| atomic_read(&q->u.out.busy_siga_counter)); |
| QDIO_DBF_TEXT3(0, trace, dbf_text); |
| #endif /* CONFIG_QDIO_DEBUG */ |
| default: |
| /* for plain cc=1, 2 or 3 */ |
| q->qdio_error = rc; |
| } |
| } |
| |
| static void qdio_kick_outbound_handler(struct qdio_q *q) |
| { |
| int start, end, count; |
| #ifdef CONFIG_QDIO_DEBUG |
| char dbf_text[15]; |
| #endif |
| |
| start = q->first_to_kick; |
| end = q->last_move_ftc; |
| if (end >= start) |
| count = end - start; |
| else |
| count = end + QDIO_MAX_BUFFERS_PER_Q - start; |
| |
| #ifdef CONFIG_QDIO_DEBUG |
| QDIO_DBF_TEXT4(0, trace, "kickouth"); |
| QDIO_DBF_HEX4(0, trace, &q, sizeof(void *)); |
| |
| sprintf(dbf_text, "s=%2xc=%2x", start, count); |
| QDIO_DBF_TEXT4(0, trace, dbf_text); |
| #endif /* CONFIG_QDIO_DEBUG */ |
| |
| if (unlikely(q->irq_ptr->state != QDIO_IRQ_STATE_ACTIVE)) |
| return; |
| |
| q->handler(q->irq_ptr->cdev, q->qdio_error, q->nr, start, count, |
| q->irq_ptr->int_parm); |
| |
| /* for the next time: */ |
| q->first_to_kick = q->last_move_ftc; |
| q->qdio_error = 0; |
| } |
| |
| static void __qdio_outbound_processing(struct qdio_q *q) |
| { |
| int siga_attempts; |
| |
| qdio_perf_stat_inc(&perf_stats.tasklet_outbound); |
| |
| /* see comment in qdio_kick_outbound_q */ |
| siga_attempts = atomic_read(&q->u.out.busy_siga_counter); |
| while (siga_attempts--) { |
| atomic_dec(&q->u.out.busy_siga_counter); |
| qdio_kick_outbound_q(q); |
| } |
| |
| BUG_ON(atomic_read(&q->nr_buf_used) < 0); |
| |
| if (qdio_outbound_q_moved(q)) |
| qdio_kick_outbound_handler(q); |
| |
| if (queue_type(q) == QDIO_ZFCP_QFMT) { |
| if (!pci_out_supported(q) && !qdio_outbound_q_done(q)) |
| tasklet_schedule(&q->tasklet); |
| return; |
| } |
| |
| /* bail out for HiperSockets unicast queues */ |
| if (queue_type(q) == QDIO_IQDIO_QFMT && !multicast_outbound(q)) |
| return; |
| |
| if ((queue_type(q) == QDIO_IQDIO_QFMT) && |
| (atomic_read(&q->nr_buf_used)) > QDIO_IQDIO_POLL_LVL) { |
| tasklet_schedule(&q->tasklet); |
| return; |
| } |
| |
| if (q->u.out.pci_out_enabled) |
| return; |
| |
| /* |
| * Now we know that queue type is either qeth without pci enabled |
| * or HiperSockets multicast. Make sure buffer switch from PRIMED to |
| * EMPTY is noticed and outbound_handler is called after some time. |
| */ |
| if (qdio_outbound_q_done(q)) |
| del_timer(&q->u.out.timer); |
| else { |
| if (!timer_pending(&q->u.out.timer)) { |
| mod_timer(&q->u.out.timer, jiffies + 10 * HZ); |
| qdio_perf_stat_inc(&perf_stats.debug_tl_out_timer); |
| } |
| } |
| } |
| |
| /* outbound tasklet */ |
| void qdio_outbound_processing(unsigned long data) |
| { |
| struct qdio_q *q = (struct qdio_q *)data; |
| __qdio_outbound_processing(q); |
| } |
| |
| void qdio_outbound_timer(unsigned long data) |
| { |
| struct qdio_q *q = (struct qdio_q *)data; |
| tasklet_schedule(&q->tasklet); |
| } |
| |
| /* called from thinint inbound tasklet */ |
| void qdio_check_outbound_after_thinint(struct qdio_q *q) |
| { |
| struct qdio_q *out; |
| int i; |
| |
| if (!pci_out_supported(q)) |
| return; |
| |
| for_each_output_queue(q->irq_ptr, out, i) |
| if (!qdio_outbound_q_done(out)) |
| tasklet_schedule(&out->tasklet); |
| } |
| |
| static inline void qdio_set_state(struct qdio_irq *irq_ptr, |
| enum qdio_irq_states state) |
| { |
| #ifdef CONFIG_QDIO_DEBUG |
| char dbf_text[15]; |
| |
| QDIO_DBF_TEXT5(0, trace, "newstate"); |
| sprintf(dbf_text, "%4x%4x", irq_ptr->schid.sch_no, state); |
| QDIO_DBF_TEXT5(0, trace, dbf_text); |
| #endif /* CONFIG_QDIO_DEBUG */ |
| |
| irq_ptr->state = state; |
| mb(); |
| } |
| |
| static void qdio_irq_check_sense(struct subchannel_id schid, struct irb *irb) |
| { |
| char dbf_text[15]; |
| |
| if (irb->esw.esw0.erw.cons) { |
| sprintf(dbf_text, "sens%4x", schid.sch_no); |
| QDIO_DBF_TEXT2(1, trace, dbf_text); |
| QDIO_DBF_HEX0(0, trace, irb, 64); |
| QDIO_DBF_HEX0(0, trace, irb->ecw, 64); |
| } |
| } |
| |
| /* PCI interrupt handler */ |
| static void qdio_int_handler_pci(struct qdio_irq *irq_ptr) |
| { |
| int i; |
| struct qdio_q *q; |
| |
| qdio_perf_stat_inc(&perf_stats.pci_int); |
| |
| for_each_input_queue(irq_ptr, q, i) |
| tasklet_schedule(&q->tasklet); |
| |
| if (!(irq_ptr->qib.ac & QIB_AC_OUTBOUND_PCI_SUPPORTED)) |
| return; |
| |
| for_each_output_queue(irq_ptr, q, i) { |
| if (qdio_outbound_q_done(q)) |
| continue; |
| |
| if (!siga_syncs_out_pci(q)) |
| qdio_siga_sync_q(q); |
| |
| tasklet_schedule(&q->tasklet); |
| } |
| } |
| |
| static void qdio_handle_activate_check(struct ccw_device *cdev, |
| unsigned long intparm, int cstat, int dstat) |
| { |
| struct qdio_irq *irq_ptr = cdev->private->qdio_data; |
| struct qdio_q *q; |
| char dbf_text[15]; |
| |
| QDIO_DBF_TEXT2(1, trace, "ick2"); |
| sprintf(dbf_text, "%s", dev_name(&cdev->dev)); |
| QDIO_DBF_TEXT2(1, trace, dbf_text); |
| QDIO_DBF_HEX2(0, trace, &intparm, sizeof(int)); |
| QDIO_DBF_HEX2(0, trace, &dstat, sizeof(int)); |
| QDIO_DBF_HEX2(0, trace, &cstat, sizeof(int)); |
| |
| if (irq_ptr->nr_input_qs) { |
| q = irq_ptr->input_qs[0]; |
| } else if (irq_ptr->nr_output_qs) { |
| q = irq_ptr->output_qs[0]; |
| } else { |
| dump_stack(); |
| goto no_handler; |
| } |
| q->handler(q->irq_ptr->cdev, QDIO_ERROR_ACTIVATE_CHECK_CONDITION, |
| 0, -1, -1, irq_ptr->int_parm); |
| no_handler: |
| qdio_set_state(irq_ptr, QDIO_IRQ_STATE_STOPPED); |
| } |
| |
| static void qdio_call_shutdown(struct work_struct *work) |
| { |
| struct ccw_device_private *priv; |
| struct ccw_device *cdev; |
| |
| priv = container_of(work, struct ccw_device_private, kick_work); |
| cdev = priv->cdev; |
| qdio_shutdown(cdev, QDIO_FLAG_CLEANUP_USING_CLEAR); |
| put_device(&cdev->dev); |
| } |
| |
| static void qdio_int_error(struct ccw_device *cdev) |
| { |
| struct qdio_irq *irq_ptr = cdev->private->qdio_data; |
| |
| switch (irq_ptr->state) { |
| case QDIO_IRQ_STATE_INACTIVE: |
| case QDIO_IRQ_STATE_CLEANUP: |
| qdio_set_state(irq_ptr, QDIO_IRQ_STATE_ERR); |
| break; |
| case QDIO_IRQ_STATE_ESTABLISHED: |
| case QDIO_IRQ_STATE_ACTIVE: |
| qdio_set_state(irq_ptr, QDIO_IRQ_STATE_STOPPED); |
| if (get_device(&cdev->dev)) { |
| /* Can't call shutdown from interrupt context. */ |
| PREPARE_WORK(&cdev->private->kick_work, |
| qdio_call_shutdown); |
| queue_work(ccw_device_work, &cdev->private->kick_work); |
| } |
| break; |
| default: |
| WARN_ON(1); |
| } |
| wake_up(&cdev->private->wait_q); |
| } |
| |
| static int qdio_establish_check_errors(struct ccw_device *cdev, int cstat, |
| int dstat) |
| { |
| struct qdio_irq *irq_ptr = cdev->private->qdio_data; |
| |
| if (cstat || (dstat & ~(DEV_STAT_CHN_END | DEV_STAT_DEV_END))) { |
| QDIO_DBF_TEXT2(1, setup, "eq:ckcon"); |
| goto error; |
| } |
| |
| if (!(dstat & DEV_STAT_DEV_END)) { |
| QDIO_DBF_TEXT2(1, setup, "eq:no de"); |
| goto error; |
| } |
| |
| if (dstat & ~(DEV_STAT_CHN_END | DEV_STAT_DEV_END)) { |
| QDIO_DBF_TEXT2(1, setup, "eq:badio"); |
| goto error; |
| } |
| return 0; |
| error: |
| QDIO_DBF_HEX2(0, trace, &cstat, sizeof(int)); |
| QDIO_DBF_HEX2(0, trace, &dstat, sizeof(int)); |
| qdio_set_state(irq_ptr, QDIO_IRQ_STATE_ERR); |
| return 1; |
| } |
| |
| static void qdio_establish_handle_irq(struct ccw_device *cdev, int cstat, |
| int dstat) |
| { |
| struct qdio_irq *irq_ptr = cdev->private->qdio_data; |
| char dbf_text[15]; |
| |
| sprintf(dbf_text, "qehi%4x", cdev->private->schid.sch_no); |
| QDIO_DBF_TEXT0(0, setup, dbf_text); |
| QDIO_DBF_TEXT0(0, trace, dbf_text); |
| |
| if (!qdio_establish_check_errors(cdev, cstat, dstat)) |
| qdio_set_state(irq_ptr, QDIO_IRQ_STATE_ESTABLISHED); |
| } |
| |
| /* qdio interrupt handler */ |
| void qdio_int_handler(struct ccw_device *cdev, unsigned long intparm, |
| struct irb *irb) |
| { |
| struct qdio_irq *irq_ptr = cdev->private->qdio_data; |
| int cstat, dstat; |
| char dbf_text[15]; |
| |
| qdio_perf_stat_inc(&perf_stats.qdio_int); |
| |
| if (!intparm || !irq_ptr) { |
| sprintf(dbf_text, "qihd%4x", cdev->private->schid.sch_no); |
| QDIO_DBF_TEXT2(1, setup, dbf_text); |
| return; |
| } |
| |
| if (IS_ERR(irb)) { |
| switch (PTR_ERR(irb)) { |
| case -EIO: |
| sprintf(dbf_text, "ierr%4x", irq_ptr->schid.sch_no); |
| QDIO_DBF_TEXT2(1, setup, dbf_text); |
| qdio_int_error(cdev); |
| return; |
| case -ETIMEDOUT: |
| sprintf(dbf_text, "qtoh%4x", irq_ptr->schid.sch_no); |
| QDIO_DBF_TEXT2(1, setup, dbf_text); |
| qdio_int_error(cdev); |
| return; |
| default: |
| WARN_ON(1); |
| return; |
| } |
| } |
| qdio_irq_check_sense(irq_ptr->schid, irb); |
| |
| cstat = irb->scsw.cmd.cstat; |
| dstat = irb->scsw.cmd.dstat; |
| |
| switch (irq_ptr->state) { |
| case QDIO_IRQ_STATE_INACTIVE: |
| qdio_establish_handle_irq(cdev, cstat, dstat); |
| break; |
| |
| case QDIO_IRQ_STATE_CLEANUP: |
| qdio_set_state(irq_ptr, QDIO_IRQ_STATE_INACTIVE); |
| break; |
| |
| case QDIO_IRQ_STATE_ESTABLISHED: |
| case QDIO_IRQ_STATE_ACTIVE: |
| if (cstat & SCHN_STAT_PCI) { |
| qdio_int_handler_pci(irq_ptr); |
| /* no state change so no need to wake up wait_q */ |
| return; |
| } |
| if ((cstat & ~SCHN_STAT_PCI) || dstat) { |
| qdio_handle_activate_check(cdev, intparm, cstat, |
| dstat); |
| break; |
| } |
| default: |
| WARN_ON(1); |
| } |
| wake_up(&cdev->private->wait_q); |
| } |
| |
| /** |
| * qdio_get_ssqd_desc - get qdio subchannel description |
| * @cdev: ccw device to get description for |
| * |
| * Returns a pointer to the saved qdio subchannel description, |
| * or NULL for not setup qdio devices. |
| */ |
| struct qdio_ssqd_desc *qdio_get_ssqd_desc(struct ccw_device *cdev) |
| { |
| struct qdio_irq *irq_ptr; |
| char dbf_text[15]; |
| |
| sprintf(dbf_text, "qssq%4x", cdev->private->schid.sch_no); |
| QDIO_DBF_TEXT0(0, setup, dbf_text); |
| |
| irq_ptr = cdev->private->qdio_data; |
| if (!irq_ptr) |
| return NULL; |
| |
| return &irq_ptr->ssqd_desc; |
| } |
| EXPORT_SYMBOL_GPL(qdio_get_ssqd_desc); |
| |
| /** |
| * qdio_cleanup - shutdown queues and free data structures |
| * @cdev: associated ccw device |
| * @how: use halt or clear to shutdown |
| * |
| * This function calls qdio_shutdown() for @cdev with method @how |
| * and on success qdio_free() for @cdev. |
| */ |
| int qdio_cleanup(struct ccw_device *cdev, int how) |
| { |
| struct qdio_irq *irq_ptr; |
| char dbf_text[15]; |
| int rc; |
| |
| sprintf(dbf_text, "qcln%4x", cdev->private->schid.sch_no); |
| QDIO_DBF_TEXT0(0, setup, dbf_text); |
| |
| irq_ptr = cdev->private->qdio_data; |
| if (!irq_ptr) |
| return -ENODEV; |
| |
| rc = qdio_shutdown(cdev, how); |
| if (rc == 0) |
| rc = qdio_free(cdev); |
| return rc; |
| } |
| EXPORT_SYMBOL_GPL(qdio_cleanup); |
| |
| static void qdio_shutdown_queues(struct ccw_device *cdev) |
| { |
| struct qdio_irq *irq_ptr = cdev->private->qdio_data; |
| struct qdio_q *q; |
| int i; |
| |
| for_each_input_queue(irq_ptr, q, i) |
| tasklet_disable(&q->tasklet); |
| |
| for_each_output_queue(irq_ptr, q, i) { |
| tasklet_disable(&q->tasklet); |
| del_timer(&q->u.out.timer); |
| } |
| } |
| |
| /** |
| * qdio_shutdown - shut down a qdio subchannel |
| * @cdev: associated ccw device |
| * @how: use halt or clear to shutdown |
| */ |
| int qdio_shutdown(struct ccw_device *cdev, int how) |
| { |
| struct qdio_irq *irq_ptr; |
| int rc; |
| unsigned long flags; |
| char dbf_text[15]; |
| |
| sprintf(dbf_text, "qshu%4x", cdev->private->schid.sch_no); |
| QDIO_DBF_TEXT0(0, setup, dbf_text); |
| |
| irq_ptr = cdev->private->qdio_data; |
| if (!irq_ptr) |
| return -ENODEV; |
| |
| mutex_lock(&irq_ptr->setup_mutex); |
| /* |
| * Subchannel was already shot down. We cannot prevent being called |
| * twice since cio may trigger a shutdown asynchronously. |
| */ |
| if (irq_ptr->state == QDIO_IRQ_STATE_INACTIVE) { |
| mutex_unlock(&irq_ptr->setup_mutex); |
| return 0; |
| } |
| |
| tiqdio_remove_input_queues(irq_ptr); |
| qdio_shutdown_queues(cdev); |
| qdio_shutdown_debug_entries(irq_ptr, cdev); |
| |
| /* cleanup subchannel */ |
| spin_lock_irqsave(get_ccwdev_lock(cdev), flags); |
| |
| if (how & QDIO_FLAG_CLEANUP_USING_CLEAR) |
| rc = ccw_device_clear(cdev, QDIO_DOING_CLEANUP); |
| else |
| /* default behaviour is halt */ |
| rc = ccw_device_halt(cdev, QDIO_DOING_CLEANUP); |
| if (rc) { |
| sprintf(dbf_text, "sher%4x", irq_ptr->schid.sch_no); |
| QDIO_DBF_TEXT0(0, setup, dbf_text); |
| sprintf(dbf_text, "rc=%d", rc); |
| QDIO_DBF_TEXT0(0, setup, dbf_text); |
| goto no_cleanup; |
| } |
| |
| qdio_set_state(irq_ptr, QDIO_IRQ_STATE_CLEANUP); |
| spin_unlock_irqrestore(get_ccwdev_lock(cdev), flags); |
| wait_event_interruptible_timeout(cdev->private->wait_q, |
| irq_ptr->state == QDIO_IRQ_STATE_INACTIVE || |
| irq_ptr->state == QDIO_IRQ_STATE_ERR, |
| 10 * HZ); |
| spin_lock_irqsave(get_ccwdev_lock(cdev), flags); |
| |
| no_cleanup: |
| qdio_shutdown_thinint(irq_ptr); |
| |
| /* restore interrupt handler */ |
| if ((void *)cdev->handler == (void *)qdio_int_handler) |
| cdev->handler = irq_ptr->orig_handler; |
| spin_unlock_irqrestore(get_ccwdev_lock(cdev), flags); |
| |
| qdio_set_state(irq_ptr, QDIO_IRQ_STATE_INACTIVE); |
| mutex_unlock(&irq_ptr->setup_mutex); |
| if (rc) |
| return rc; |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(qdio_shutdown); |
| |
| /** |
| * qdio_free - free data structures for a qdio subchannel |
| * @cdev: associated ccw device |
| */ |
| int qdio_free(struct ccw_device *cdev) |
| { |
| struct qdio_irq *irq_ptr; |
| char dbf_text[15]; |
| |
| sprintf(dbf_text, "qfre%4x", cdev->private->schid.sch_no); |
| QDIO_DBF_TEXT0(0, setup, dbf_text); |
| |
| irq_ptr = cdev->private->qdio_data; |
| if (!irq_ptr) |
| return -ENODEV; |
| |
| mutex_lock(&irq_ptr->setup_mutex); |
| cdev->private->qdio_data = NULL; |
| mutex_unlock(&irq_ptr->setup_mutex); |
| |
| qdio_release_memory(irq_ptr); |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(qdio_free); |
| |
| /** |
| * qdio_initialize - allocate and establish queues for a qdio subchannel |
| * @init_data: initialization data |
| * |
| * This function first allocates queues via qdio_allocate() and on success |
| * establishes them via qdio_establish(). |
| */ |
| int qdio_initialize(struct qdio_initialize *init_data) |
| { |
| int rc; |
| char dbf_text[15]; |
| |
| sprintf(dbf_text, "qini%4x", init_data->cdev->private->schid.sch_no); |
| QDIO_DBF_TEXT0(0, setup, dbf_text); |
| |
| rc = qdio_allocate(init_data); |
| if (rc) |
| return rc; |
| |
| rc = qdio_establish(init_data); |
| if (rc) |
| qdio_free(init_data->cdev); |
| return rc; |
| } |
| EXPORT_SYMBOL_GPL(qdio_initialize); |
| |
| /** |
| * qdio_allocate - allocate qdio queues and associated data |
| * @init_data: initialization data |
| */ |
| int qdio_allocate(struct qdio_initialize *init_data) |
| { |
| struct qdio_irq *irq_ptr; |
| char dbf_text[15]; |
| |
| sprintf(dbf_text, "qalc%4x", init_data->cdev->private->schid.sch_no); |
| QDIO_DBF_TEXT0(0, setup, dbf_text); |
| |
| if ((init_data->no_input_qs && !init_data->input_handler) || |
| (init_data->no_output_qs && !init_data->output_handler)) |
| return -EINVAL; |
| |
| if ((init_data->no_input_qs > QDIO_MAX_QUEUES_PER_IRQ) || |
| (init_data->no_output_qs > QDIO_MAX_QUEUES_PER_IRQ)) |
| return -EINVAL; |
| |
| if ((!init_data->input_sbal_addr_array) || |
| (!init_data->output_sbal_addr_array)) |
| return -EINVAL; |
| |
| qdio_allocate_do_dbf(init_data); |
| |
| /* irq_ptr must be in GFP_DMA since it contains ccw1.cda */ |
| irq_ptr = (void *) get_zeroed_page(GFP_KERNEL | GFP_DMA); |
| if (!irq_ptr) |
| goto out_err; |
| QDIO_DBF_TEXT0(0, setup, "irq_ptr:"); |
| QDIO_DBF_HEX0(0, setup, &irq_ptr, sizeof(void *)); |
| |
| mutex_init(&irq_ptr->setup_mutex); |
| |
| /* |
| * Allocate a page for the chsc calls in qdio_establish. |
| * Must be pre-allocated since a zfcp recovery will call |
| * qdio_establish. In case of low memory and swap on a zfcp disk |
| * we may not be able to allocate memory otherwise. |
| */ |
| irq_ptr->chsc_page = get_zeroed_page(GFP_KERNEL); |
| if (!irq_ptr->chsc_page) |
| goto out_rel; |
| |
| /* qdr is used in ccw1.cda which is u32 */ |
| irq_ptr->qdr = (struct qdr *) get_zeroed_page(GFP_KERNEL | GFP_DMA); |
| if (!irq_ptr->qdr) |
| goto out_rel; |
| WARN_ON((unsigned long)irq_ptr->qdr & 0xfff); |
| |
| QDIO_DBF_TEXT0(0, setup, "qdr:"); |
| QDIO_DBF_HEX0(0, setup, &irq_ptr->qdr, sizeof(void *)); |
| |
| if (qdio_allocate_qs(irq_ptr, init_data->no_input_qs, |
| init_data->no_output_qs)) |
| goto out_rel; |
| |
| init_data->cdev->private->qdio_data = irq_ptr; |
| qdio_set_state(irq_ptr, QDIO_IRQ_STATE_INACTIVE); |
| return 0; |
| out_rel: |
| qdio_release_memory(irq_ptr); |
| out_err: |
| return -ENOMEM; |
| } |
| EXPORT_SYMBOL_GPL(qdio_allocate); |
| |
| /** |
| * qdio_establish - establish queues on a qdio subchannel |
| * @init_data: initialization data |
| */ |
| int qdio_establish(struct qdio_initialize *init_data) |
| { |
| char dbf_text[20]; |
| struct qdio_irq *irq_ptr; |
| struct ccw_device *cdev = init_data->cdev; |
| unsigned long saveflags; |
| int rc; |
| |
| sprintf(dbf_text, "qest%4x", cdev->private->schid.sch_no); |
| QDIO_DBF_TEXT0(0, setup, dbf_text); |
| |
| irq_ptr = cdev->private->qdio_data; |
| if (!irq_ptr) |
| return -ENODEV; |
| |
| if (cdev->private->state != DEV_STATE_ONLINE) |
| return -EINVAL; |
| |
| mutex_lock(&irq_ptr->setup_mutex); |
| qdio_setup_irq(init_data); |
| |
| rc = qdio_establish_thinint(irq_ptr); |
| if (rc) { |
| mutex_unlock(&irq_ptr->setup_mutex); |
| qdio_shutdown(cdev, QDIO_FLAG_CLEANUP_USING_CLEAR); |
| return rc; |
| } |
| |
| /* establish q */ |
| irq_ptr->ccw.cmd_code = irq_ptr->equeue.cmd; |
| irq_ptr->ccw.flags = CCW_FLAG_SLI; |
| irq_ptr->ccw.count = irq_ptr->equeue.count; |
| irq_ptr->ccw.cda = (u32)((addr_t)irq_ptr->qdr); |
| |
| spin_lock_irqsave(get_ccwdev_lock(cdev), saveflags); |
| ccw_device_set_options_mask(cdev, 0); |
| |
| rc = ccw_device_start(cdev, &irq_ptr->ccw, QDIO_DOING_ESTABLISH, 0, 0); |
| if (rc) { |
| sprintf(dbf_text, "eq:io%4x", irq_ptr->schid.sch_no); |
| QDIO_DBF_TEXT2(1, setup, dbf_text); |
| sprintf(dbf_text, "eq:rc%4x", rc); |
| QDIO_DBF_TEXT2(1, setup, dbf_text); |
| } |
| spin_unlock_irqrestore(get_ccwdev_lock(cdev), saveflags); |
| |
| if (rc) { |
| mutex_unlock(&irq_ptr->setup_mutex); |
| qdio_shutdown(cdev, QDIO_FLAG_CLEANUP_USING_CLEAR); |
| return rc; |
| } |
| |
| wait_event_interruptible_timeout(cdev->private->wait_q, |
| irq_ptr->state == QDIO_IRQ_STATE_ESTABLISHED || |
| irq_ptr->state == QDIO_IRQ_STATE_ERR, HZ); |
| |
| if (irq_ptr->state != QDIO_IRQ_STATE_ESTABLISHED) { |
| mutex_unlock(&irq_ptr->setup_mutex); |
| qdio_shutdown(cdev, QDIO_FLAG_CLEANUP_USING_CLEAR); |
| return -EIO; |
| } |
| |
| qdio_setup_ssqd_info(irq_ptr); |
| sprintf(dbf_text, "qDmmwc%2x", irq_ptr->ssqd_desc.mmwc); |
| QDIO_DBF_TEXT2(0, setup, dbf_text); |
| sprintf(dbf_text, "qib ac%2x", irq_ptr->qib.ac); |
| QDIO_DBF_TEXT2(0, setup, dbf_text); |
| |
| /* qebsm is now setup if available, initialize buffer states */ |
| qdio_init_buf_states(irq_ptr); |
| |
| mutex_unlock(&irq_ptr->setup_mutex); |
| qdio_print_subchannel_info(irq_ptr, cdev); |
| qdio_setup_debug_entries(irq_ptr, cdev); |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(qdio_establish); |
| |
| /** |
| * qdio_activate - activate queues on a qdio subchannel |
| * @cdev: associated cdev |
| */ |
| int qdio_activate(struct ccw_device *cdev) |
| { |
| struct qdio_irq *irq_ptr; |
| int rc; |
| unsigned long saveflags; |
| char dbf_text[20]; |
| |
| sprintf(dbf_text, "qact%4x", cdev->private->schid.sch_no); |
| QDIO_DBF_TEXT0(0, setup, dbf_text); |
| |
| irq_ptr = cdev->private->qdio_data; |
| if (!irq_ptr) |
| return -ENODEV; |
| |
| if (cdev->private->state != DEV_STATE_ONLINE) |
| return -EINVAL; |
| |
| mutex_lock(&irq_ptr->setup_mutex); |
| if (irq_ptr->state == QDIO_IRQ_STATE_INACTIVE) { |
| rc = -EBUSY; |
| goto out; |
| } |
| |
| irq_ptr->ccw.cmd_code = irq_ptr->aqueue.cmd; |
| irq_ptr->ccw.flags = CCW_FLAG_SLI; |
| irq_ptr->ccw.count = irq_ptr->aqueue.count; |
| irq_ptr->ccw.cda = 0; |
| |
| spin_lock_irqsave(get_ccwdev_lock(cdev), saveflags); |
| ccw_device_set_options(cdev, CCWDEV_REPORT_ALL); |
| |
| rc = ccw_device_start(cdev, &irq_ptr->ccw, QDIO_DOING_ACTIVATE, |
| 0, DOIO_DENY_PREFETCH); |
| if (rc) { |
| sprintf(dbf_text, "aq:io%4x", irq_ptr->schid.sch_no); |
| QDIO_DBF_TEXT2(1, setup, dbf_text); |
| sprintf(dbf_text, "aq:rc%4x", rc); |
| QDIO_DBF_TEXT2(1, setup, dbf_text); |
| } |
| spin_unlock_irqrestore(get_ccwdev_lock(cdev), saveflags); |
| |
| if (rc) |
| goto out; |
| |
| if (is_thinint_irq(irq_ptr)) |
| tiqdio_add_input_queues(irq_ptr); |
| |
| /* wait for subchannel to become active */ |
| msleep(5); |
| |
| switch (irq_ptr->state) { |
| case QDIO_IRQ_STATE_STOPPED: |
| case QDIO_IRQ_STATE_ERR: |
| mutex_unlock(&irq_ptr->setup_mutex); |
| qdio_shutdown(cdev, QDIO_FLAG_CLEANUP_USING_CLEAR); |
| return -EIO; |
| default: |
| qdio_set_state(irq_ptr, QDIO_IRQ_STATE_ACTIVE); |
| rc = 0; |
| } |
| out: |
| mutex_unlock(&irq_ptr->setup_mutex); |
| return rc; |
| } |
| EXPORT_SYMBOL_GPL(qdio_activate); |
| |
| static inline int buf_in_between(int bufnr, int start, int count) |
| { |
| int end = add_buf(start, count); |
| |
| if (end > start) { |
| if (bufnr >= start && bufnr < end) |
| return 1; |
| else |
| return 0; |
| } |
| |
| /* wrap-around case */ |
| if ((bufnr >= start && bufnr <= QDIO_MAX_BUFFERS_PER_Q) || |
| (bufnr < end)) |
| return 1; |
| else |
| return 0; |
| } |
| |
| /** |
| * handle_inbound - reset processed input buffers |
| * @q: queue containing the buffers |
| * @callflags: flags |
| * @bufnr: first buffer to process |
| * @count: how many buffers are emptied |
| */ |
| static void handle_inbound(struct qdio_q *q, unsigned int callflags, |
| int bufnr, int count) |
| { |
| unsigned long flags; |
| int used, rc; |
| |
| /* |
| * do_QDIO could run in parallel with the queue tasklet so the |
| * upper-layer programm could empty the ACK'ed buffer here. |
| * If that happens we must clear the polling flag, otherwise |
| * qdio_stop_polling() could set the buffer to NOT_INIT after |
| * it was set to EMPTY which would kill us. |
| */ |
| spin_lock_irqsave(&q->u.in.lock, flags); |
| if (q->u.in.polling) |
| if (buf_in_between(q->last_move_ftc, bufnr, count)) |
| q->u.in.polling = 0; |
| |
| count = set_buf_states(q, bufnr, SLSB_CU_INPUT_EMPTY, count); |
| spin_unlock_irqrestore(&q->u.in.lock, flags); |
| |
| used = atomic_add_return(count, &q->nr_buf_used) - count; |
| BUG_ON(used + count > QDIO_MAX_BUFFERS_PER_Q); |
| |
| /* no need to signal as long as the adapter had free buffers */ |
| if (used) |
| return; |
| |
| if (need_siga_in(q)) { |
| rc = qdio_siga_input(q); |
| if (rc) |
| q->qdio_error = rc; |
| } |
| } |
| |
| /** |
| * handle_outbound - process filled outbound buffers |
| * @q: queue containing the buffers |
| * @callflags: flags |
| * @bufnr: first buffer to process |
| * @count: how many buffers are filled |
| */ |
| static void handle_outbound(struct qdio_q *q, unsigned int callflags, |
| int bufnr, int count) |
| { |
| unsigned char state; |
| int used; |
| |
| qdio_perf_stat_inc(&perf_stats.outbound_handler); |
| |
| count = set_buf_states(q, bufnr, SLSB_CU_OUTPUT_PRIMED, count); |
| used = atomic_add_return(count, &q->nr_buf_used); |
| BUG_ON(used > QDIO_MAX_BUFFERS_PER_Q); |
| |
| if (callflags & QDIO_FLAG_PCI_OUT) |
| q->u.out.pci_out_enabled = 1; |
| else |
| q->u.out.pci_out_enabled = 0; |
| |
| if (queue_type(q) == QDIO_IQDIO_QFMT) { |
| if (multicast_outbound(q)) |
| qdio_kick_outbound_q(q); |
| else |
| if ((q->irq_ptr->ssqd_desc.mmwc > 1) && |
| (count > 1) && |
| (count <= q->irq_ptr->ssqd_desc.mmwc)) { |
| /* exploit enhanced SIGA */ |
| q->u.out.use_enh_siga = 1; |
| qdio_kick_outbound_q(q); |
| } else { |
| /* |
| * One siga-w per buffer required for unicast |
| * HiperSockets. |
| */ |
| q->u.out.use_enh_siga = 0; |
| while (count--) |
| qdio_kick_outbound_q(q); |
| } |
| goto out; |
| } |
| |
| if (need_siga_sync(q)) { |
| qdio_siga_sync_q(q); |
| goto out; |
| } |
| |
| /* try to fast requeue buffers */ |
| get_buf_state(q, prev_buf(bufnr), &state); |
| if (state != SLSB_CU_OUTPUT_PRIMED) |
| qdio_kick_outbound_q(q); |
| else { |
| QDIO_DBF_TEXT5(0, trace, "fast-req"); |
| qdio_perf_stat_inc(&perf_stats.fast_requeue); |
| } |
| out: |
| /* Fixme: could wait forever if called from process context */ |
| tasklet_schedule(&q->tasklet); |
| } |
| |
| /** |
| * do_QDIO - process input or output buffers |
| * @cdev: associated ccw_device for the qdio subchannel |
| * @callflags: input or output and special flags from the program |
| * @q_nr: queue number |
| * @bufnr: buffer number |
| * @count: how many buffers to process |
| */ |
| int do_QDIO(struct ccw_device *cdev, unsigned int callflags, |
| int q_nr, int bufnr, int count) |
| { |
| struct qdio_irq *irq_ptr; |
| #ifdef CONFIG_QDIO_DEBUG |
| char dbf_text[20]; |
| |
| sprintf(dbf_text, "doQD%4x", cdev->private->schid.sch_no); |
| QDIO_DBF_TEXT3(0, trace, dbf_text); |
| #endif /* CONFIG_QDIO_DEBUG */ |
| |
| if ((bufnr > QDIO_MAX_BUFFERS_PER_Q) || |
| (count > QDIO_MAX_BUFFERS_PER_Q) || |
| (q_nr > QDIO_MAX_QUEUES_PER_IRQ)) |
| return -EINVAL; |
| |
| if (!count) |
| return 0; |
| |
| irq_ptr = cdev->private->qdio_data; |
| if (!irq_ptr) |
| return -ENODEV; |
| |
| #ifdef CONFIG_QDIO_DEBUG |
| if (callflags & QDIO_FLAG_SYNC_INPUT) |
| QDIO_DBF_HEX3(0, trace, &irq_ptr->input_qs[q_nr], |
| sizeof(void *)); |
| else |
| QDIO_DBF_HEX3(0, trace, &irq_ptr->output_qs[q_nr], |
| sizeof(void *)); |
| |
| sprintf(dbf_text, "flag%04x", callflags); |
| QDIO_DBF_TEXT3(0, trace, dbf_text); |
| sprintf(dbf_text, "qi%02xct%02x", bufnr, count); |
| QDIO_DBF_TEXT3(0, trace, dbf_text); |
| #endif /* CONFIG_QDIO_DEBUG */ |
| |
| if (irq_ptr->state != QDIO_IRQ_STATE_ACTIVE) |
| return -EBUSY; |
| |
| if (callflags & QDIO_FLAG_SYNC_INPUT) |
| handle_inbound(irq_ptr->input_qs[q_nr], |
| callflags, bufnr, count); |
| else if (callflags & QDIO_FLAG_SYNC_OUTPUT) |
| handle_outbound(irq_ptr->output_qs[q_nr], |
| callflags, bufnr, count); |
| else { |
| QDIO_DBF_TEXT3(1, trace, "doQD:inv"); |
| return -EINVAL; |
| } |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(do_QDIO); |
| |
| static int __init init_QDIO(void) |
| { |
| int rc; |
| |
| rc = qdio_setup_init(); |
| if (rc) |
| return rc; |
| rc = tiqdio_allocate_memory(); |
| if (rc) |
| goto out_cache; |
| rc = qdio_debug_init(); |
| if (rc) |
| goto out_ti; |
| rc = qdio_setup_perf_stats(); |
| if (rc) |
| goto out_debug; |
| rc = tiqdio_register_thinints(); |
| if (rc) |
| goto out_perf; |
| return 0; |
| |
| out_perf: |
| qdio_remove_perf_stats(); |
| out_debug: |
| qdio_debug_exit(); |
| out_ti: |
| tiqdio_free_memory(); |
| out_cache: |
| qdio_setup_exit(); |
| return rc; |
| } |
| |
| static void __exit exit_QDIO(void) |
| { |
| tiqdio_unregister_thinints(); |
| tiqdio_free_memory(); |
| qdio_remove_perf_stats(); |
| qdio_debug_exit(); |
| qdio_setup_exit(); |
| } |
| |
| module_init(init_QDIO); |
| module_exit(exit_QDIO); |