arch/arm/boot/dts/msm8926.dtsi

/* Copyright (c) 2013, The Linux Foundation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 and
 * only version 2 as published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

/*
 * Only 8926-specific property overrides should be placed inside this
 * file. Device definitions should be placed inside the msm8226.dtsi
 * file.
 */

/include/ "msm8226.dtsi"
/include/ "msm8226-v2-pm.dtsi"

/ {
	model = "Qualcomm MSM 8926";
	compatible = "qcom,msm8926";
	qcom,msm-id = <200 0>,
		      <224 0>;
};

&soc {
	qcom,mss@fc880000 {
		reg = <0xfc880000 0x100>,
		      <0xfd485000 0x400>,
		      <0xfc820000 0x20>,
		      <0xfc401680 0x4>;
		reg-names = "qdsp6_base", "halt_base", "rmb_base",
			    "restart_reg";
		vdd_mss-supply = <&pm8226_s5>;
	};

	qcom,acpuclk@f9011050 {
		reg =	<0xf9011050 0x8>,
			<0xfc4b80b0 0x8>;
		reg-names = "rcg_base", "pte_efuse";
	};
};

&pm8226_l3 {
	regulator-min-microvolt = <750000>;
	regulator-max-microvolt = <1287500>;
};

&pm8226_l3_ao {
	regulator-min-microvolt = <750000>;
	regulator-max-microvolt = <1287500>;
};

&pm8226_l3_so {
	regulator-min-microvolt = <750000>;
	regulator-max-microvolt = <1287500>;
};

&pm8226_s2 {
	regulator-min-microvolt = <900000>;
	regulator-max-microvolt = <1280000>;
};

&apc_vreg_corner {
	qcom,pvs-bin-process = <1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2
				2 2 2 2 2 3 3 3 3 3 3 3 3 3 3 3>;
	qcom,pvs-corner-ceiling-slow = <1050000 1160000 1280000>;
	qcom,pvs-corner-ceiling-nom  = <1050000 1080000 1200000>;
	qcom,pvs-corner-ceiling-fast = <1050000 1050000 1140000>;
	qcom,cpr-step-quotient = <30>;
	qcom,cpr-up-threshold = <0>;
	qcom,cpr-down-threshold = <5>;
	qcom,cpr-apc-volt-step = <10000>;
};

&tsens {
	qcom,sensors = <6>;
	qcom,slope = <2901 2846 3038 2955 2901 2846>;
};

&msmgpio {
	ngpio = <120>;
};

&memory_hole {
	qcom,memblock-remove = <0x08000000 0x7500000
				0x0fa00000 0x500000>; /* Address and size of the hole */
};