| /* |
| * File: arch/blackfin/mach-common/entry.S |
| * Based on: |
| * Author: Linus Torvalds |
| * |
| * Created: ? |
| * Description: contains the system-call and fault low-level handling routines. |
| * This also contains the timer-interrupt handler, as well as all |
| * interrupts and faults that can result in a task-switch. |
| * |
| * Modified: |
| * Copyright 2004-2006 Analog Devices Inc. |
| * |
| * Bugs: Enter bugs at http://blackfin.uclinux.org/ |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, see the file COPYING, or write |
| * to the Free Software Foundation, Inc., |
| * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| */ |
| |
| /* NOTE: This code handles signal-recognition, which happens every time |
| * after a timer-interrupt and after each system call. |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/linkage.h> |
| #include <linux/unistd.h> |
| #include <asm/blackfin.h> |
| #include <asm/errno.h> |
| #include <asm/fixed_code.h> |
| #include <asm/thread_info.h> /* TIF_NEED_RESCHED */ |
| #include <asm/asm-offsets.h> |
| #include <asm/trace.h> |
| |
| #include <asm/mach-common/context.S> |
| |
| #if defined(CONFIG_BFIN_SCRATCH_REG_RETN) |
| # define EX_SCRATCH_REG RETN |
| #elif defined(CONFIG_BFIN_SCRATCH_REG_RETE) |
| # define EX_SCRATCH_REG RETE |
| #else |
| # define EX_SCRATCH_REG CYCLES |
| #endif |
| |
| #ifdef CONFIG_EXCPT_IRQ_SYSC_L1 |
| .section .l1.text |
| #else |
| .text |
| #endif |
| |
| /* Slightly simplified and streamlined entry point for CPLB misses. |
| * This one does not lower the level to IRQ5, and thus can be used to |
| * patch up CPLB misses on the kernel stack. |
| */ |
| #if ANOMALY_05000261 |
| #define _ex_dviol _ex_workaround_261 |
| #define _ex_dmiss _ex_workaround_261 |
| #define _ex_dmult _ex_workaround_261 |
| |
| ENTRY(_ex_workaround_261) |
| /* |
| * Work around an anomaly: if we see a new DCPLB fault, return |
| * without doing anything. Then, if we get the same fault again, |
| * handle it. |
| */ |
| P4 = R7; /* Store EXCAUSE */ |
| p5.l = _last_cplb_fault_retx; |
| p5.h = _last_cplb_fault_retx; |
| r7 = [p5]; |
| r6 = retx; |
| [p5] = r6; |
| cc = r6 == r7; |
| if !cc jump _bfin_return_from_exception; |
| /* fall through */ |
| R7 = P4; |
| R6 = 0x26; /* Data CPLB Miss */ |
| cc = R6 == R7; |
| if cc jump _ex_dcplb_miss (BP); |
| R6 = 0x23; /* Data CPLB Miss */ |
| cc = R6 == R7; |
| if cc jump _ex_dcplb_viol (BP); |
| /* Handle 0x23 Data CPLB Protection Violation |
| * and Data CPLB Multiple Hits - Linux Trap Zero |
| */ |
| jump _ex_trap_c; |
| ENDPROC(_ex_workaround_261) |
| |
| #else |
| #ifdef CONFIG_MPU |
| #define _ex_dviol _ex_dcplb_viol |
| #else |
| #define _ex_dviol _ex_trap_c |
| #endif |
| #define _ex_dmiss _ex_dcplb_miss |
| #define _ex_dmult _ex_trap_c |
| #endif |
| |
| |
| ENTRY(_ex_dcplb_viol) |
| ENTRY(_ex_dcplb_miss) |
| ENTRY(_ex_icplb_miss) |
| (R7:6,P5:4) = [sp++]; |
| ASTAT = [sp++]; |
| SAVE_ALL_SYS |
| #ifdef CONFIG_MPU |
| /* We must load R1 here, _before_ DEBUG_HWTRACE_SAVE, since that |
| * will change the stack pointer. */ |
| R0 = SEQSTAT; |
| R1 = SP; |
| #endif |
| DEBUG_HWTRACE_SAVE(p5, r7) |
| #ifdef CONFIG_MPU |
| sp += -12; |
| call _cplb_hdr; |
| sp += 12; |
| CC = R0 == 0; |
| IF !CC JUMP _handle_bad_cplb; |
| #else |
| call __cplb_hdr; |
| #endif |
| DEBUG_HWTRACE_RESTORE(p5, r7) |
| RESTORE_ALL_SYS |
| SP = EX_SCRATCH_REG; |
| rtx; |
| ENDPROC(_ex_icplb_miss) |
| |
| ENTRY(_ex_syscall) |
| (R7:6,P5:4) = [sp++]; |
| ASTAT = [sp++]; |
| raise 15; /* invoked by TRAP #0, for sys call */ |
| sp = EX_SCRATCH_REG; |
| rtx |
| ENDPROC(_ex_syscall) |
| |
| ENTRY(_ex_soft_bp) |
| r7 = retx; |
| r7 += -2; |
| retx = r7; |
| jump.s _ex_trap_c; |
| ENDPROC(_ex_soft_bp) |
| |
| ENTRY(_ex_single_step) |
| /* If we just returned from an interrupt, the single step event is |
| for the RTI instruction. */ |
| r7 = retx; |
| r6 = reti; |
| cc = r7 == r6; |
| if cc jump _bfin_return_from_exception; |
| |
| #ifdef CONFIG_KGDB |
| /* Don't do single step in hardware exception handler */ |
| p5.l = lo(IPEND); |
| p5.h = hi(IPEND); |
| r6 = [p5]; |
| cc = bittst(r6, 4); |
| if cc jump _bfin_return_from_exception; |
| cc = bittst(r6, 5); |
| if cc jump _bfin_return_from_exception; |
| |
| /* skip single step if current interrupt priority is higher than |
| * that of the first instruction, from which gdb starts single step */ |
| r6 >>= 6; |
| r7 = 10; |
| .Lfind_priority_start: |
| cc = bittst(r6, 0); |
| if cc jump .Lfind_priority_done; |
| r6 >>= 1; |
| r7 += -1; |
| cc = r7 == 0; |
| if cc jump .Lfind_priority_done; |
| jump.s .Lfind_priority_start; |
| .Lfind_priority_done: |
| p4.l = _debugger_step; |
| p4.h = _debugger_step; |
| r6 = [p4]; |
| cc = r6 == 0; |
| if cc jump .Ldo_single_step; |
| r6 += -1; |
| cc = r6 < r7; |
| if cc jump 1f; |
| .Ldo_single_step: |
| #else |
| /* If we were in user mode, do the single step normally. */ |
| p5.l = lo(IPEND); |
| p5.h = hi(IPEND); |
| r6 = [p5]; |
| r7 = 0xffe0 (z); |
| r7 = r7 & r6; |
| cc = r7 == 0; |
| if !cc jump 1f; |
| #endif |
| |
| /* Single stepping only a single instruction, so clear the trace |
| * bit here. */ |
| r7 = syscfg; |
| bitclr (r7, 0); |
| syscfg = R7; |
| jump _ex_trap_c; |
| |
| 1: |
| /* |
| * We were in an interrupt handler. By convention, all of them save |
| * SYSCFG with their first instruction, so by checking whether our |
| * RETX points at the entry point, we can determine whether to allow |
| * a single step, or whether to clear SYSCFG. |
| * |
| * First, find out the interrupt level and the event vector for it. |
| */ |
| p5.l = lo(EVT0); |
| p5.h = hi(EVT0); |
| p5 += -4; |
| 2: |
| r7 = rot r7 by -1; |
| p5 += 4; |
| if !cc jump 2b; |
| |
| /* What we actually do is test for the _second_ instruction in the |
| * IRQ handler. That way, if there are insns following the restore |
| * of SYSCFG after leaving the handler, we will not turn off SYSCFG |
| * for them. */ |
| |
| r7 = [p5]; |
| r7 += 2; |
| r6 = RETX; |
| cc = R7 == R6; |
| if !cc jump _bfin_return_from_exception; |
| |
| r7 = syscfg; |
| bitclr (r7, 0); |
| syscfg = R7; |
| |
| /* Fall through to _bfin_return_from_exception. */ |
| ENDPROC(_ex_single_step) |
| |
| ENTRY(_bfin_return_from_exception) |
| #if ANOMALY_05000257 |
| R7=LC0; |
| LC0=R7; |
| R7=LC1; |
| LC1=R7; |
| #endif |
| (R7:6,P5:4) = [sp++]; |
| ASTAT = [sp++]; |
| sp = EX_SCRATCH_REG; |
| rtx; |
| ENDPROC(_bfin_return_from_exception) |
| |
| ENTRY(_handle_bad_cplb) |
| DEBUG_HWTRACE_RESTORE(p5, r7) |
| /* To get here, we just tried and failed to change a CPLB |
| * so, handle things in trap_c (C code), by lowering to |
| * IRQ5, just like we normally do. Since this is not a |
| * "normal" return path, we have a do alot of stuff to |
| * the stack to get ready so, we can fall through - we |
| * need to make a CPLB exception look like a normal exception |
| */ |
| |
| RESTORE_ALL_SYS |
| [--sp] = ASTAT; |
| [--sp] = (R7:6,P5:4); |
| |
| ENTRY(_ex_replaceable) |
| nop; |
| |
| ENTRY(_ex_trap_c) |
| /* Make sure we are not in a double fault */ |
| p4.l = lo(IPEND); |
| p4.h = hi(IPEND); |
| r7 = [p4]; |
| CC = BITTST (r7, 5); |
| if CC jump _double_fault; |
| |
| /* Call C code (trap_c) to handle the exception, which most |
| * likely involves sending a signal to the current process. |
| * To avoid double faults, lower our priority to IRQ5 first. |
| */ |
| P5.h = _exception_to_level5; |
| P5.l = _exception_to_level5; |
| p4.l = lo(EVT5); |
| p4.h = hi(EVT5); |
| [p4] = p5; |
| csync; |
| |
| p4.l = lo(DCPLB_FAULT_ADDR); |
| p4.h = hi(DCPLB_FAULT_ADDR); |
| r7 = [p4]; |
| p5.h = _saved_dcplb_fault_addr; |
| p5.l = _saved_dcplb_fault_addr; |
| [p5] = r7; |
| |
| r7 = [p4 + (ICPLB_FAULT_ADDR - DCPLB_FAULT_ADDR)]; |
| p5.h = _saved_icplb_fault_addr; |
| p5.l = _saved_icplb_fault_addr; |
| [p5] = r7; |
| |
| p4.l = _excpt_saved_stuff; |
| p4.h = _excpt_saved_stuff; |
| |
| r6 = retx; |
| [p4] = r6; |
| |
| r6 = SYSCFG; |
| [p4 + 4] = r6; |
| BITCLR(r6, 0); |
| SYSCFG = r6; |
| |
| /* Disable all interrupts, but make sure level 5 is enabled so |
| * we can switch to that level. Save the old mask. */ |
| cli r6; |
| [p4 + 8] = r6; |
| |
| p4.l = lo(SAFE_USER_INSTRUCTION); |
| p4.h = hi(SAFE_USER_INSTRUCTION); |
| retx = p4; |
| |
| r6 = 0x3f; |
| sti r6; |
| |
| (R7:6,P5:4) = [sp++]; |
| ASTAT = [sp++]; |
| SP = EX_SCRATCH_REG; |
| raise 5; |
| rtx; |
| ENDPROC(_ex_trap_c) |
| |
| /* We just realized we got an exception, while we were processing a different |
| * exception. This is a unrecoverable event, so crash |
| */ |
| ENTRY(_double_fault) |
| /* Turn caches & protection off, to ensure we don't get any more |
| * double exceptions |
| */ |
| |
| P4.L = LO(IMEM_CONTROL); |
| P4.H = HI(IMEM_CONTROL); |
| |
| R5 = [P4]; /* Control Register*/ |
| BITCLR(R5,ENICPLB_P); |
| SSYNC; /* SSYNC required before writing to IMEM_CONTROL. */ |
| .align 8; |
| [P4] = R5; |
| SSYNC; |
| |
| P4.L = LO(DMEM_CONTROL); |
| P4.H = HI(DMEM_CONTROL); |
| R5 = [P4]; |
| BITCLR(R5,ENDCPLB_P); |
| SSYNC; /* SSYNC required before writing to DMEM_CONTROL. */ |
| .align 8; |
| [P4] = R5; |
| SSYNC; |
| |
| /* Fix up the stack */ |
| (R7:6,P5:4) = [sp++]; |
| ASTAT = [sp++]; |
| SP = EX_SCRATCH_REG; |
| |
| /* We should be out of the exception stack, and back down into |
| * kernel or user space stack |
| */ |
| SAVE_ALL_SYS |
| |
| /* The dumping functions expect the return address in the RETI |
| * slot. */ |
| r6 = retx; |
| [sp + PT_PC] = r6; |
| |
| r0 = sp; /* stack frame pt_regs pointer argument ==> r0 */ |
| SP += -12; |
| call _double_fault_c; |
| SP += 12; |
| .L_double_fault_panic: |
| JUMP .L_double_fault_panic |
| |
| ENDPROC(_double_fault) |
| |
| ENTRY(_exception_to_level5) |
| SAVE_ALL_SYS |
| |
| p4.l = _excpt_saved_stuff; |
| p4.h = _excpt_saved_stuff; |
| r6 = [p4]; |
| [sp + PT_PC] = r6; |
| |
| r6 = [p4 + 4]; |
| [sp + PT_SYSCFG] = r6; |
| |
| /* Restore interrupt mask. We haven't pushed RETI, so this |
| * doesn't enable interrupts until we return from this handler. */ |
| r6 = [p4 + 8]; |
| sti r6; |
| |
| /* Restore the hardware error vector. */ |
| P5.h = _evt_ivhw; |
| P5.l = _evt_ivhw; |
| p4.l = lo(EVT5); |
| p4.h = hi(EVT5); |
| [p4] = p5; |
| csync; |
| |
| p2.l = lo(IPEND); |
| p2.h = hi(IPEND); |
| csync; |
| r0 = [p2]; /* Read current IPEND */ |
| [sp + PT_IPEND] = r0; /* Store IPEND */ |
| |
| r0 = sp; /* stack frame pt_regs pointer argument ==> r0 */ |
| SP += -12; |
| call _trap_c; |
| SP += 12; |
| |
| call _ret_from_exception; |
| RESTORE_ALL_SYS |
| rti; |
| ENDPROC(_exception_to_level5) |
| |
| ENTRY(_trap) /* Exception: 4th entry into system event table(supervisor mode)*/ |
| /* Since the kernel stack can be anywhere, it's not guaranteed to be |
| * covered by a CPLB. Switch to an exception stack; use RETN as a |
| * scratch register (for want of a better option). |
| */ |
| EX_SCRATCH_REG = sp; |
| sp.l = _exception_stack_top; |
| sp.h = _exception_stack_top; |
| /* Try to deal with syscalls quickly. */ |
| [--sp] = ASTAT; |
| [--sp] = (R7:6,P5:4); |
| r7 = SEQSTAT; /* reason code is in bit 5:0 */ |
| r6.l = lo(SEQSTAT_EXCAUSE); |
| r6.h = hi(SEQSTAT_EXCAUSE); |
| r7 = r7 & r6; |
| p5.h = _ex_table; |
| p5.l = _ex_table; |
| p4 = r7; |
| p5 = p5 + (p4 << 2); |
| p4 = [p5]; |
| jump (p4); |
| |
| .Lbadsys: |
| r7 = -ENOSYS; /* signextending enough */ |
| [sp + PT_R0] = r7; /* return value from system call */ |
| jump .Lsyscall_really_exit; |
| ENDPROC(_trap) |
| |
| ENTRY(_kernel_execve) |
| link SIZEOF_PTREGS; |
| p0 = sp; |
| r3 = SIZEOF_PTREGS / 4; |
| r4 = 0(x); |
| 0: |
| [p0++] = r4; |
| r3 += -1; |
| cc = r3 == 0; |
| if !cc jump 0b (bp); |
| |
| p0 = sp; |
| sp += -16; |
| [sp + 12] = p0; |
| call _do_execve; |
| SP += 16; |
| cc = r0 == 0; |
| if ! cc jump 1f; |
| /* Success. Copy our temporary pt_regs to the top of the kernel |
| * stack and do a normal exception return. |
| */ |
| r1 = sp; |
| r0 = (-KERNEL_STACK_SIZE) (x); |
| r1 = r1 & r0; |
| p2 = r1; |
| p3 = [p2]; |
| r0 = KERNEL_STACK_SIZE - 4 (z); |
| p1 = r0; |
| p1 = p1 + p2; |
| |
| p0 = fp; |
| r4 = [p0--]; |
| r3 = SIZEOF_PTREGS / 4; |
| 0: |
| r4 = [p0--]; |
| [p1--] = r4; |
| r3 += -1; |
| cc = r3 == 0; |
| if ! cc jump 0b (bp); |
| |
| r0 = (KERNEL_STACK_SIZE - SIZEOF_PTREGS) (z); |
| p1 = r0; |
| p1 = p1 + p2; |
| sp = p1; |
| r0 = syscfg; |
| [SP + PT_SYSCFG] = r0; |
| [p3 + (TASK_THREAD + THREAD_KSP)] = sp; |
| |
| RESTORE_CONTEXT; |
| rti; |
| 1: |
| unlink; |
| rts; |
| ENDPROC(_kernel_execve) |
| |
| ENTRY(_system_call) |
| /* Store IPEND */ |
| p2.l = lo(IPEND); |
| p2.h = hi(IPEND); |
| csync; |
| r0 = [p2]; |
| [sp + PT_IPEND] = r0; |
| |
| /* Store RETS for now */ |
| r0 = rets; |
| [sp + PT_RESERVED] = r0; |
| /* Set the stack for the current process */ |
| r7 = sp; |
| r6.l = lo(ALIGN_PAGE_MASK); |
| r6.h = hi(ALIGN_PAGE_MASK); |
| r7 = r7 & r6; /* thread_info */ |
| p2 = r7; |
| p2 = [p2]; |
| |
| [p2+(TASK_THREAD+THREAD_KSP)] = sp; |
| |
| /* Check the System Call */ |
| r7 = __NR_syscall; |
| /* System call number is passed in P0 */ |
| r6 = p0; |
| cc = r6 < r7; |
| if ! cc jump .Lbadsys; |
| |
| /* are we tracing syscalls?*/ |
| r7 = sp; |
| r6.l = lo(ALIGN_PAGE_MASK); |
| r6.h = hi(ALIGN_PAGE_MASK); |
| r7 = r7 & r6; |
| p2 = r7; |
| r7 = [p2+TI_FLAGS]; |
| CC = BITTST(r7,TIF_SYSCALL_TRACE); |
| if CC JUMP _sys_trace; |
| |
| /* Execute the appropriate system call */ |
| |
| p4 = p0; |
| p5.l = _sys_call_table; |
| p5.h = _sys_call_table; |
| p5 = p5 + (p4 << 2); |
| r0 = [sp + PT_R0]; |
| r1 = [sp + PT_R1]; |
| r2 = [sp + PT_R2]; |
| p5 = [p5]; |
| |
| [--sp] = r5; |
| [--sp] = r4; |
| [--sp] = r3; |
| SP += -12; |
| call (p5); |
| SP += 24; |
| [sp + PT_R0] = r0; |
| |
| .Lresume_userspace: |
| r7 = sp; |
| r4.l = lo(ALIGN_PAGE_MASK); |
| r4.h = hi(ALIGN_PAGE_MASK); |
| r7 = r7 & r4; /* thread_info->flags */ |
| p5 = r7; |
| .Lresume_userspace_1: |
| /* Disable interrupts. */ |
| [--sp] = reti; |
| reti = [sp++]; |
| |
| r7 = [p5 + TI_FLAGS]; |
| r4.l = lo(_TIF_WORK_MASK); |
| r4.h = hi(_TIF_WORK_MASK); |
| r7 = r7 & r4; |
| |
| .Lsyscall_resched: |
| cc = BITTST(r7, TIF_NEED_RESCHED); |
| if !cc jump .Lsyscall_sigpending; |
| |
| /* Reenable interrupts. */ |
| [--sp] = reti; |
| r0 = [sp++]; |
| |
| SP += -12; |
| call _schedule; |
| SP += 12; |
| |
| jump .Lresume_userspace_1; |
| |
| .Lsyscall_sigpending: |
| cc = BITTST(r7, TIF_RESTORE_SIGMASK); |
| if cc jump .Lsyscall_do_signals; |
| cc = BITTST(r7, TIF_SIGPENDING); |
| if !cc jump .Lsyscall_really_exit; |
| .Lsyscall_do_signals: |
| /* Reenable interrupts. */ |
| [--sp] = reti; |
| r0 = [sp++]; |
| |
| r0 = sp; |
| SP += -12; |
| call _do_signal; |
| SP += 12; |
| |
| .Lsyscall_really_exit: |
| r5 = [sp + PT_RESERVED]; |
| rets = r5; |
| rts; |
| ENDPROC(_system_call) |
| |
| _sys_trace: |
| call _syscall_trace; |
| |
| /* Execute the appropriate system call */ |
| |
| p4 = [SP + PT_P0]; |
| p5.l = _sys_call_table; |
| p5.h = _sys_call_table; |
| p5 = p5 + (p4 << 2); |
| r0 = [sp + PT_R0]; |
| r1 = [sp + PT_R1]; |
| r2 = [sp + PT_R2]; |
| r3 = [sp + PT_R3]; |
| r4 = [sp + PT_R4]; |
| r5 = [sp + PT_R5]; |
| p5 = [p5]; |
| |
| [--sp] = r5; |
| [--sp] = r4; |
| [--sp] = r3; |
| SP += -12; |
| call (p5); |
| SP += 24; |
| [sp + PT_R0] = r0; |
| |
| call _syscall_trace; |
| jump .Lresume_userspace; |
| ENDPROC(_sys_trace) |
| |
| ENTRY(_resume) |
| /* |
| * Beware - when entering resume, prev (the current task) is |
| * in r0, next (the new task) is in r1. |
| */ |
| p0 = r0; |
| p1 = r1; |
| [--sp] = rets; |
| [--sp] = fp; |
| [--sp] = (r7:4, p5:3); |
| |
| /* save usp */ |
| p2 = usp; |
| [p0+(TASK_THREAD+THREAD_USP)] = p2; |
| |
| /* save current kernel stack pointer */ |
| [p0+(TASK_THREAD+THREAD_KSP)] = sp; |
| |
| /* save program counter */ |
| r1.l = _new_old_task; |
| r1.h = _new_old_task; |
| [p0+(TASK_THREAD+THREAD_PC)] = r1; |
| |
| /* restore the kernel stack pointer */ |
| sp = [p1+(TASK_THREAD+THREAD_KSP)]; |
| |
| /* restore user stack pointer */ |
| p0 = [p1+(TASK_THREAD+THREAD_USP)]; |
| usp = p0; |
| |
| /* restore pc */ |
| p0 = [p1+(TASK_THREAD+THREAD_PC)]; |
| jump (p0); |
| |
| /* |
| * Following code actually lands up in a new (old) task. |
| */ |
| |
| _new_old_task: |
| (r7:4, p5:3) = [sp++]; |
| fp = [sp++]; |
| rets = [sp++]; |
| |
| /* |
| * When we come out of resume, r0 carries "old" task, becuase we are |
| * in "new" task. |
| */ |
| rts; |
| ENDPROC(_resume) |
| |
| ENTRY(_ret_from_exception) |
| p2.l = lo(IPEND); |
| p2.h = hi(IPEND); |
| |
| csync; |
| r0 = [p2]; |
| [sp + PT_IPEND] = r0; |
| |
| 1: |
| r2 = LO(~0x37) (Z); |
| r0 = r2 & r0; |
| cc = r0 == 0; |
| if !cc jump 4f; /* if not return to user mode, get out */ |
| |
| /* Make sure any pending system call or deferred exception |
| * return in ILAT for this process to get executed, otherwise |
| * in case context switch happens, system call of |
| * first process (i.e in ILAT) will be carried |
| * forward to the switched process |
| */ |
| |
| p2.l = lo(ILAT); |
| p2.h = hi(ILAT); |
| r0 = [p2]; |
| r1 = (EVT_IVG14 | EVT_IVG15) (z); |
| r0 = r0 & r1; |
| cc = r0 == 0; |
| if !cc jump 5f; |
| |
| /* Set the stack for the current process */ |
| r7 = sp; |
| r4.l = lo(ALIGN_PAGE_MASK); |
| r4.h = hi(ALIGN_PAGE_MASK); |
| r7 = r7 & r4; /* thread_info->flags */ |
| p5 = r7; |
| r7 = [p5 + TI_FLAGS]; |
| r4.l = lo(_TIF_WORK_MASK); |
| r4.h = hi(_TIF_WORK_MASK); |
| r7 = r7 & r4; |
| cc = r7 == 0; |
| if cc jump 4f; |
| |
| p0.l = lo(EVT15); |
| p0.h = hi(EVT15); |
| p1.l = _schedule_and_signal; |
| p1.h = _schedule_and_signal; |
| [p0] = p1; |
| csync; |
| raise 15; /* raise evt14 to do signal or reschedule */ |
| 4: |
| r0 = syscfg; |
| bitclr(r0, 0); |
| syscfg = r0; |
| 5: |
| rts; |
| ENDPROC(_ret_from_exception) |
| |
| ENTRY(_return_from_int) |
| /* If someone else already raised IRQ 15, do nothing. */ |
| csync; |
| p2.l = lo(ILAT); |
| p2.h = hi(ILAT); |
| r0 = [p2]; |
| cc = bittst (r0, EVT_IVG15_P); |
| if cc jump 2f; |
| |
| /* if not return to user mode, get out */ |
| p2.l = lo(IPEND); |
| p2.h = hi(IPEND); |
| r0 = [p2]; |
| r1 = 0x17(Z); |
| r2 = ~r1; |
| r2.h = 0; |
| r0 = r2 & r0; |
| r1 = 1; |
| r1 = r0 - r1; |
| r2 = r0 & r1; |
| cc = r2 == 0; |
| if !cc jump 2f; |
| |
| /* Lower the interrupt level to 15. */ |
| p0.l = lo(EVT15); |
| p0.h = hi(EVT15); |
| p1.l = _schedule_and_signal_from_int; |
| p1.h = _schedule_and_signal_from_int; |
| [p0] = p1; |
| csync; |
| #if ANOMALY_05000281 |
| r0.l = lo(SAFE_USER_INSTRUCTION); |
| r0.h = hi(SAFE_USER_INSTRUCTION); |
| reti = r0; |
| #endif |
| r0 = 0x801f (z); |
| STI r0; |
| raise 15; /* raise evt15 to do signal or reschedule */ |
| rti; |
| 2: |
| rts; |
| ENDPROC(_return_from_int) |
| |
| ENTRY(_lower_to_irq14) |
| #if ANOMALY_05000281 |
| r0.l = lo(SAFE_USER_INSTRUCTION); |
| r0.h = hi(SAFE_USER_INSTRUCTION); |
| reti = r0; |
| #endif |
| r0 = 0x401f; |
| sti r0; |
| raise 14; |
| rti; |
| ENTRY(_evt14_softirq) |
| #ifdef CONFIG_DEBUG_HWERR |
| r0 = 0x3f; |
| sti r0; |
| #else |
| cli r0; |
| #endif |
| [--sp] = RETI; |
| SP += 4; |
| rts; |
| |
| _schedule_and_signal_from_int: |
| /* To end up here, vector 15 was changed - so we have to change it |
| * back. |
| */ |
| p0.l = lo(EVT15); |
| p0.h = hi(EVT15); |
| p1.l = _evt_system_call; |
| p1.h = _evt_system_call; |
| [p0] = p1; |
| csync; |
| |
| /* Set orig_p0 to -1 to indicate this isn't the end of a syscall. */ |
| r0 = -1 (x); |
| [sp + PT_ORIG_P0] = r0; |
| |
| p1 = rets; |
| [sp + PT_RESERVED] = p1; |
| |
| p0.l = _irq_flags; |
| p0.h = _irq_flags; |
| r0 = [p0]; |
| sti r0; |
| |
| r0 = sp; |
| sp += -12; |
| call _finish_atomic_sections; |
| sp += 12; |
| jump.s .Lresume_userspace; |
| |
| _schedule_and_signal: |
| SAVE_CONTEXT_SYSCALL |
| /* To end up here, vector 15 was changed - so we have to change it |
| * back. |
| */ |
| p0.l = lo(EVT15); |
| p0.h = hi(EVT15); |
| p1.l = _evt_system_call; |
| p1.h = _evt_system_call; |
| [p0] = p1; |
| csync; |
| p0.l = 1f; |
| p0.h = 1f; |
| [sp + PT_RESERVED] = P0; |
| call .Lresume_userspace; |
| 1: |
| RESTORE_CONTEXT |
| rti; |
| ENDPROC(_lower_to_irq14) |
| |
| /* We handle this 100% in exception space - to reduce overhead |
| * Only potiential problem is if the software buffer gets swapped out of the |
| * CPLB table - then double fault. - so we don't let this happen in other places |
| */ |
| #ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND |
| ENTRY(_ex_trace_buff_full) |
| [--sp] = P3; |
| [--sp] = P2; |
| [--sp] = LC0; |
| [--sp] = LT0; |
| [--sp] = LB0; |
| P5.L = _trace_buff_offset; |
| P5.H = _trace_buff_offset; |
| P3 = [P5]; /* trace_buff_offset */ |
| P5.L = lo(TBUFSTAT); |
| P5.H = hi(TBUFSTAT); |
| R7 = [P5]; |
| R7 <<= 1; /* double, since we need to read twice */ |
| LC0 = R7; |
| R7 <<= 2; /* need to shift over again, |
| * to get the number of bytes */ |
| P5.L = lo(TBUF); |
| P5.H = hi(TBUF); |
| R6 = ((1 << CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN)*1024) - 1; |
| |
| P2 = R7; |
| P3 = P3 + P2; |
| R7 = P3; |
| R7 = R7 & R6; |
| P3 = R7; |
| P2.L = _trace_buff_offset; |
| P2.H = _trace_buff_offset; |
| [P2] = P3; |
| |
| P2.L = _software_trace_buff; |
| P2.H = _software_trace_buff; |
| |
| LSETUP (.Lstart, .Lend) LC0; |
| .Lstart: |
| R7 = [P5]; /* read TBUF */ |
| P4 = P3 + P2; |
| [P4] = R7; |
| P3 += -4; |
| R7 = P3; |
| R7 = R7 & R6; |
| .Lend: |
| P3 = R7; |
| |
| LB0 = [sp++]; |
| LT0 = [sp++]; |
| LC0 = [sp++]; |
| P2 = [sp++]; |
| P3 = [sp++]; |
| jump _bfin_return_from_exception; |
| ENDPROC(_ex_trace_buff_full) |
| |
| #if CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN == 4 |
| .data |
| #else |
| .section .l1.data.B |
| #endif /* CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN */ |
| ENTRY(_trace_buff_offset) |
| .long 0; |
| ALIGN |
| ENTRY(_software_trace_buff) |
| .rept ((1 << CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN)*256); |
| .long 0 |
| .endr |
| #endif /* CONFIG_DEBUG_BFIN_HWTRACE_EXPAND */ |
| |
| #if CONFIG_EARLY_PRINTK |
| __INIT |
| ENTRY(_early_trap) |
| SAVE_ALL_SYS |
| trace_buffer_stop(p0,r0); |
| |
| /* Turn caches off, to ensure we don't get double exceptions */ |
| |
| P4.L = LO(IMEM_CONTROL); |
| P4.H = HI(IMEM_CONTROL); |
| |
| R5 = [P4]; /* Control Register*/ |
| BITCLR(R5,ENICPLB_P); |
| CLI R1; |
| SSYNC; /* SSYNC required before writing to IMEM_CONTROL. */ |
| .align 8; |
| [P4] = R5; |
| SSYNC; |
| |
| P4.L = LO(DMEM_CONTROL); |
| P4.H = HI(DMEM_CONTROL); |
| R5 = [P4]; |
| BITCLR(R5,ENDCPLB_P); |
| SSYNC; /* SSYNC required before writing to DMEM_CONTROL. */ |
| .align 8; |
| [P4] = R5; |
| SSYNC; |
| STI R1; |
| |
| r0 = sp; /* stack frame pt_regs pointer argument ==> r0 */ |
| r1 = RETX; |
| |
| SP += -12; |
| call _early_trap_c; |
| SP += 12; |
| ENDPROC(_early_trap) |
| __FINIT |
| #endif /* CONFIG_EARLY_PRINTK */ |
| |
| /* |
| * Put these in the kernel data section - that should always be covered by |
| * a CPLB. This is needed to ensure we don't get double fault conditions |
| */ |
| |
| #ifdef CONFIG_SYSCALL_TAB_L1 |
| .section .l1.data |
| #else |
| .data |
| #endif |
| |
| ENTRY(_ex_table) |
| /* entry for each EXCAUSE[5:0] |
| * This table must be in sync with the table in ./kernel/traps.c |
| * EXCPT instruction can provide 4 bits of EXCAUSE, allowing 16 to be user defined |
| */ |
| .long _ex_syscall /* 0x00 - User Defined - Linux Syscall */ |
| .long _ex_soft_bp /* 0x01 - User Defined - Software breakpoint */ |
| .long _ex_replaceable /* 0x02 - User Defined */ |
| .long _ex_trap_c /* 0x03 - User Defined - userspace stack overflow */ |
| .long _ex_trap_c /* 0x04 - User Defined - dump trace buffer */ |
| .long _ex_replaceable /* 0x05 - User Defined */ |
| .long _ex_replaceable /* 0x06 - User Defined */ |
| .long _ex_replaceable /* 0x07 - User Defined */ |
| .long _ex_replaceable /* 0x08 - User Defined */ |
| .long _ex_replaceable /* 0x09 - User Defined */ |
| .long _ex_replaceable /* 0x0A - User Defined */ |
| .long _ex_replaceable /* 0x0B - User Defined */ |
| .long _ex_replaceable /* 0x0C - User Defined */ |
| .long _ex_replaceable /* 0x0D - User Defined */ |
| .long _ex_replaceable /* 0x0E - User Defined */ |
| .long _ex_replaceable /* 0x0F - User Defined */ |
| .long _ex_single_step /* 0x10 - HW Single step */ |
| #ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND |
| .long _ex_trace_buff_full /* 0x11 - Trace Buffer Full */ |
| #else |
| .long _ex_trap_c /* 0x11 - Trace Buffer Full */ |
| #endif |
| .long _ex_trap_c /* 0x12 - Reserved */ |
| .long _ex_trap_c /* 0x13 - Reserved */ |
| .long _ex_trap_c /* 0x14 - Reserved */ |
| .long _ex_trap_c /* 0x15 - Reserved */ |
| .long _ex_trap_c /* 0x16 - Reserved */ |
| .long _ex_trap_c /* 0x17 - Reserved */ |
| .long _ex_trap_c /* 0x18 - Reserved */ |
| .long _ex_trap_c /* 0x19 - Reserved */ |
| .long _ex_trap_c /* 0x1A - Reserved */ |
| .long _ex_trap_c /* 0x1B - Reserved */ |
| .long _ex_trap_c /* 0x1C - Reserved */ |
| .long _ex_trap_c /* 0x1D - Reserved */ |
| .long _ex_trap_c /* 0x1E - Reserved */ |
| .long _ex_trap_c /* 0x1F - Reserved */ |
| .long _ex_trap_c /* 0x20 - Reserved */ |
| .long _ex_trap_c /* 0x21 - Undefined Instruction */ |
| .long _ex_trap_c /* 0x22 - Illegal Instruction Combination */ |
| .long _ex_dviol /* 0x23 - Data CPLB Protection Violation */ |
| .long _ex_trap_c /* 0x24 - Data access misaligned */ |
| .long _ex_trap_c /* 0x25 - Unrecoverable Event */ |
| .long _ex_dmiss /* 0x26 - Data CPLB Miss */ |
| .long _ex_dmult /* 0x27 - Data CPLB Multiple Hits - Linux Trap Zero */ |
| .long _ex_trap_c /* 0x28 - Emulation Watchpoint */ |
| .long _ex_trap_c /* 0x29 - Instruction fetch access error (535 only) */ |
| .long _ex_trap_c /* 0x2A - Instruction fetch misaligned */ |
| .long _ex_trap_c /* 0x2B - Instruction CPLB protection Violation */ |
| .long _ex_icplb_miss /* 0x2C - Instruction CPLB miss */ |
| .long _ex_trap_c /* 0x2D - Instruction CPLB Multiple Hits */ |
| .long _ex_trap_c /* 0x2E - Illegal use of Supervisor Resource */ |
| .long _ex_trap_c /* 0x2E - Illegal use of Supervisor Resource */ |
| .long _ex_trap_c /* 0x2F - Reserved */ |
| .long _ex_trap_c /* 0x30 - Reserved */ |
| .long _ex_trap_c /* 0x31 - Reserved */ |
| .long _ex_trap_c /* 0x32 - Reserved */ |
| .long _ex_trap_c /* 0x33 - Reserved */ |
| .long _ex_trap_c /* 0x34 - Reserved */ |
| .long _ex_trap_c /* 0x35 - Reserved */ |
| .long _ex_trap_c /* 0x36 - Reserved */ |
| .long _ex_trap_c /* 0x37 - Reserved */ |
| .long _ex_trap_c /* 0x38 - Reserved */ |
| .long _ex_trap_c /* 0x39 - Reserved */ |
| .long _ex_trap_c /* 0x3A - Reserved */ |
| .long _ex_trap_c /* 0x3B - Reserved */ |
| .long _ex_trap_c /* 0x3C - Reserved */ |
| .long _ex_trap_c /* 0x3D - Reserved */ |
| .long _ex_trap_c /* 0x3E - Reserved */ |
| .long _ex_trap_c /* 0x3F - Reserved */ |
| END(_ex_table) |
| |
| ENTRY(_sys_call_table) |
| .long _sys_restart_syscall /* 0 */ |
| .long _sys_exit |
| .long _sys_fork |
| .long _sys_read |
| .long _sys_write |
| .long _sys_open /* 5 */ |
| .long _sys_close |
| .long _sys_ni_syscall /* old waitpid */ |
| .long _sys_creat |
| .long _sys_link |
| .long _sys_unlink /* 10 */ |
| .long _sys_execve |
| .long _sys_chdir |
| .long _sys_time |
| .long _sys_mknod |
| .long _sys_chmod /* 15 */ |
| .long _sys_chown /* chown16 */ |
| .long _sys_ni_syscall /* old break syscall holder */ |
| .long _sys_ni_syscall /* old stat */ |
| .long _sys_lseek |
| .long _sys_getpid /* 20 */ |
| .long _sys_mount |
| .long _sys_ni_syscall /* old umount */ |
| .long _sys_setuid |
| .long _sys_getuid |
| .long _sys_stime /* 25 */ |
| .long _sys_ptrace |
| .long _sys_alarm |
| .long _sys_ni_syscall /* old fstat */ |
| .long _sys_pause |
| .long _sys_ni_syscall /* old utime */ /* 30 */ |
| .long _sys_ni_syscall /* old stty syscall holder */ |
| .long _sys_ni_syscall /* old gtty syscall holder */ |
| .long _sys_access |
| .long _sys_nice |
| .long _sys_ni_syscall /* 35 */ /* old ftime syscall holder */ |
| .long _sys_sync |
| .long _sys_kill |
| .long _sys_rename |
| .long _sys_mkdir |
| .long _sys_rmdir /* 40 */ |
| .long _sys_dup |
| .long _sys_pipe |
| .long _sys_times |
| .long _sys_ni_syscall /* old prof syscall holder */ |
| .long _sys_brk /* 45 */ |
| .long _sys_setgid |
| .long _sys_getgid |
| .long _sys_ni_syscall /* old sys_signal */ |
| .long _sys_geteuid /* geteuid16 */ |
| .long _sys_getegid /* getegid16 */ /* 50 */ |
| .long _sys_acct |
| .long _sys_umount /* recycled never used phys() */ |
| .long _sys_ni_syscall /* old lock syscall holder */ |
| .long _sys_ioctl |
| .long _sys_fcntl /* 55 */ |
| .long _sys_ni_syscall /* old mpx syscall holder */ |
| .long _sys_setpgid |
| .long _sys_ni_syscall /* old ulimit syscall holder */ |
| .long _sys_ni_syscall /* old old uname */ |
| .long _sys_umask /* 60 */ |
| .long _sys_chroot |
| .long _sys_ustat |
| .long _sys_dup2 |
| .long _sys_getppid |
| .long _sys_getpgrp /* 65 */ |
| .long _sys_setsid |
| .long _sys_ni_syscall /* old sys_sigaction */ |
| .long _sys_sgetmask |
| .long _sys_ssetmask |
| .long _sys_setreuid /* setreuid16 */ /* 70 */ |
| .long _sys_setregid /* setregid16 */ |
| .long _sys_ni_syscall /* old sys_sigsuspend */ |
| .long _sys_ni_syscall /* old sys_sigpending */ |
| .long _sys_sethostname |
| .long _sys_setrlimit /* 75 */ |
| .long _sys_ni_syscall /* old getrlimit */ |
| .long _sys_getrusage |
| .long _sys_gettimeofday |
| .long _sys_settimeofday |
| .long _sys_getgroups /* getgroups16 */ /* 80 */ |
| .long _sys_setgroups /* setgroups16 */ |
| .long _sys_ni_syscall /* old_select */ |
| .long _sys_symlink |
| .long _sys_ni_syscall /* old lstat */ |
| .long _sys_readlink /* 85 */ |
| .long _sys_uselib |
| .long _sys_ni_syscall /* sys_swapon */ |
| .long _sys_reboot |
| .long _sys_ni_syscall /* old_readdir */ |
| .long _sys_ni_syscall /* sys_mmap */ /* 90 */ |
| .long _sys_munmap |
| .long _sys_truncate |
| .long _sys_ftruncate |
| .long _sys_fchmod |
| .long _sys_fchown /* fchown16 */ /* 95 */ |
| .long _sys_getpriority |
| .long _sys_setpriority |
| .long _sys_ni_syscall /* old profil syscall holder */ |
| .long _sys_statfs |
| .long _sys_fstatfs /* 100 */ |
| .long _sys_ni_syscall |
| .long _sys_ni_syscall /* old sys_socketcall */ |
| .long _sys_syslog |
| .long _sys_setitimer |
| .long _sys_getitimer /* 105 */ |
| .long _sys_newstat |
| .long _sys_newlstat |
| .long _sys_newfstat |
| .long _sys_ni_syscall /* old uname */ |
| .long _sys_ni_syscall /* iopl for i386 */ /* 110 */ |
| .long _sys_vhangup |
| .long _sys_ni_syscall /* obsolete idle() syscall */ |
| .long _sys_ni_syscall /* vm86old for i386 */ |
| .long _sys_wait4 |
| .long _sys_ni_syscall /* 115 */ /* sys_swapoff */ |
| .long _sys_sysinfo |
| .long _sys_ni_syscall /* old sys_ipc */ |
| .long _sys_fsync |
| .long _sys_ni_syscall /* old sys_sigreturn */ |
| .long _sys_clone /* 120 */ |
| .long _sys_setdomainname |
| .long _sys_newuname |
| .long _sys_ni_syscall /* old sys_modify_ldt */ |
| .long _sys_adjtimex |
| .long _sys_ni_syscall /* 125 */ /* sys_mprotect */ |
| .long _sys_ni_syscall /* old sys_sigprocmask */ |
| .long _sys_ni_syscall /* old "creat_module" */ |
| .long _sys_init_module |
| .long _sys_delete_module |
| .long _sys_ni_syscall /* 130: old "get_kernel_syms" */ |
| .long _sys_quotactl |
| .long _sys_getpgid |
| .long _sys_fchdir |
| .long _sys_bdflush |
| .long _sys_ni_syscall /* 135 */ /* sys_sysfs */ |
| .long _sys_personality |
| .long _sys_ni_syscall /* for afs_syscall */ |
| .long _sys_setfsuid /* setfsuid16 */ |
| .long _sys_setfsgid /* setfsgid16 */ |
| .long _sys_llseek /* 140 */ |
| .long _sys_getdents |
| .long _sys_ni_syscall /* sys_select */ |
| .long _sys_flock |
| .long _sys_ni_syscall /* sys_msync */ |
| .long _sys_readv /* 145 */ |
| .long _sys_writev |
| .long _sys_getsid |
| .long _sys_fdatasync |
| .long _sys_sysctl |
| .long _sys_ni_syscall /* 150 */ /* sys_mlock */ |
| .long _sys_ni_syscall /* sys_munlock */ |
| .long _sys_ni_syscall /* sys_mlockall */ |
| .long _sys_ni_syscall /* sys_munlockall */ |
| .long _sys_sched_setparam |
| .long _sys_sched_getparam /* 155 */ |
| .long _sys_sched_setscheduler |
| .long _sys_sched_getscheduler |
| .long _sys_sched_yield |
| .long _sys_sched_get_priority_max |
| .long _sys_sched_get_priority_min /* 160 */ |
| .long _sys_sched_rr_get_interval |
| .long _sys_nanosleep |
| .long _sys_mremap |
| .long _sys_setresuid /* setresuid16 */ |
| .long _sys_getresuid /* getresuid16 */ /* 165 */ |
| .long _sys_ni_syscall /* for vm86 */ |
| .long _sys_ni_syscall /* old "query_module" */ |
| .long _sys_ni_syscall /* sys_poll */ |
| .long _sys_nfsservctl |
| .long _sys_setresgid /* setresgid16 */ /* 170 */ |
| .long _sys_getresgid /* getresgid16 */ |
| .long _sys_prctl |
| .long _sys_rt_sigreturn |
| .long _sys_rt_sigaction |
| .long _sys_rt_sigprocmask /* 175 */ |
| .long _sys_rt_sigpending |
| .long _sys_rt_sigtimedwait |
| .long _sys_rt_sigqueueinfo |
| .long _sys_rt_sigsuspend |
| .long _sys_pread64 /* 180 */ |
| .long _sys_pwrite64 |
| .long _sys_lchown /* lchown16 */ |
| .long _sys_getcwd |
| .long _sys_capget |
| .long _sys_capset /* 185 */ |
| .long _sys_sigaltstack |
| .long _sys_sendfile |
| .long _sys_ni_syscall /* streams1 */ |
| .long _sys_ni_syscall /* streams2 */ |
| .long _sys_vfork /* 190 */ |
| .long _sys_getrlimit |
| .long _sys_mmap2 |
| .long _sys_truncate64 |
| .long _sys_ftruncate64 |
| .long _sys_stat64 /* 195 */ |
| .long _sys_lstat64 |
| .long _sys_fstat64 |
| .long _sys_chown |
| .long _sys_getuid |
| .long _sys_getgid /* 200 */ |
| .long _sys_geteuid |
| .long _sys_getegid |
| .long _sys_setreuid |
| .long _sys_setregid |
| .long _sys_getgroups /* 205 */ |
| .long _sys_setgroups |
| .long _sys_fchown |
| .long _sys_setresuid |
| .long _sys_getresuid |
| .long _sys_setresgid /* 210 */ |
| .long _sys_getresgid |
| .long _sys_lchown |
| .long _sys_setuid |
| .long _sys_setgid |
| .long _sys_setfsuid /* 215 */ |
| .long _sys_setfsgid |
| .long _sys_pivot_root |
| .long _sys_ni_syscall /* sys_mincore */ |
| .long _sys_ni_syscall /* sys_madvise */ |
| .long _sys_getdents64 /* 220 */ |
| .long _sys_fcntl64 |
| .long _sys_ni_syscall /* reserved for TUX */ |
| .long _sys_ni_syscall |
| .long _sys_gettid |
| .long _sys_readahead /* 225 */ |
| .long _sys_setxattr |
| .long _sys_lsetxattr |
| .long _sys_fsetxattr |
| .long _sys_getxattr |
| .long _sys_lgetxattr /* 230 */ |
| .long _sys_fgetxattr |
| .long _sys_listxattr |
| .long _sys_llistxattr |
| .long _sys_flistxattr |
| .long _sys_removexattr /* 235 */ |
| .long _sys_lremovexattr |
| .long _sys_fremovexattr |
| .long _sys_tkill |
| .long _sys_sendfile64 |
| .long _sys_futex /* 240 */ |
| .long _sys_sched_setaffinity |
| .long _sys_sched_getaffinity |
| .long _sys_ni_syscall /* sys_set_thread_area */ |
| .long _sys_ni_syscall /* sys_get_thread_area */ |
| .long _sys_io_setup /* 245 */ |
| .long _sys_io_destroy |
| .long _sys_io_getevents |
| .long _sys_io_submit |
| .long _sys_io_cancel |
| .long _sys_ni_syscall /* 250 */ /* sys_alloc_hugepages */ |
| .long _sys_ni_syscall /* sys_freec_hugepages */ |
| .long _sys_exit_group |
| .long _sys_lookup_dcookie |
| .long _sys_bfin_spinlock |
| .long _sys_epoll_create /* 255 */ |
| .long _sys_epoll_ctl |
| .long _sys_epoll_wait |
| .long _sys_ni_syscall /* remap_file_pages */ |
| .long _sys_set_tid_address |
| .long _sys_timer_create /* 260 */ |
| .long _sys_timer_settime |
| .long _sys_timer_gettime |
| .long _sys_timer_getoverrun |
| .long _sys_timer_delete |
| .long _sys_clock_settime /* 265 */ |
| .long _sys_clock_gettime |
| .long _sys_clock_getres |
| .long _sys_clock_nanosleep |
| .long _sys_statfs64 |
| .long _sys_fstatfs64 /* 270 */ |
| .long _sys_tgkill |
| .long _sys_utimes |
| .long _sys_fadvise64_64 |
| .long _sys_ni_syscall /* vserver */ |
| .long _sys_ni_syscall /* 275, mbind */ |
| .long _sys_ni_syscall /* get_mempolicy */ |
| .long _sys_ni_syscall /* set_mempolicy */ |
| .long _sys_mq_open |
| .long _sys_mq_unlink |
| .long _sys_mq_timedsend /* 280 */ |
| .long _sys_mq_timedreceive |
| .long _sys_mq_notify |
| .long _sys_mq_getsetattr |
| .long _sys_ni_syscall /* kexec_load */ |
| .long _sys_waitid /* 285 */ |
| .long _sys_add_key |
| .long _sys_request_key |
| .long _sys_keyctl |
| .long _sys_ioprio_set |
| .long _sys_ioprio_get /* 290 */ |
| .long _sys_inotify_init |
| .long _sys_inotify_add_watch |
| .long _sys_inotify_rm_watch |
| .long _sys_ni_syscall /* migrate_pages */ |
| .long _sys_openat /* 295 */ |
| .long _sys_mkdirat |
| .long _sys_mknodat |
| .long _sys_fchownat |
| .long _sys_futimesat |
| .long _sys_fstatat64 /* 300 */ |
| .long _sys_unlinkat |
| .long _sys_renameat |
| .long _sys_linkat |
| .long _sys_symlinkat |
| .long _sys_readlinkat /* 305 */ |
| .long _sys_fchmodat |
| .long _sys_faccessat |
| .long _sys_pselect6 |
| .long _sys_ppoll |
| .long _sys_unshare /* 310 */ |
| .long _sys_sram_alloc |
| .long _sys_sram_free |
| .long _sys_dma_memcpy |
| .long _sys_accept |
| .long _sys_bind /* 315 */ |
| .long _sys_connect |
| .long _sys_getpeername |
| .long _sys_getsockname |
| .long _sys_getsockopt |
| .long _sys_listen /* 320 */ |
| .long _sys_recv |
| .long _sys_recvfrom |
| .long _sys_recvmsg |
| .long _sys_send |
| .long _sys_sendmsg /* 325 */ |
| .long _sys_sendto |
| .long _sys_setsockopt |
| .long _sys_shutdown |
| .long _sys_socket |
| .long _sys_socketpair /* 330 */ |
| .long _sys_semctl |
| .long _sys_semget |
| .long _sys_semop |
| .long _sys_msgctl |
| .long _sys_msgget /* 335 */ |
| .long _sys_msgrcv |
| .long _sys_msgsnd |
| .long _sys_shmat |
| .long _sys_shmctl |
| .long _sys_shmdt /* 340 */ |
| .long _sys_shmget |
| .long _sys_splice |
| .long _sys_sync_file_range |
| .long _sys_tee |
| .long _sys_vmsplice /* 345 */ |
| .long _sys_epoll_pwait |
| .long _sys_utimensat |
| .long _sys_signalfd |
| .long _sys_timerfd_create |
| .long _sys_eventfd /* 350 */ |
| .long _sys_pread64 |
| .long _sys_pwrite64 |
| .long _sys_fadvise64 |
| .long _sys_set_robust_list |
| .long _sys_get_robust_list /* 355 */ |
| .long _sys_fallocate |
| .long _sys_semtimedop |
| .long _sys_timerfd_settime |
| .long _sys_timerfd_gettime |
| |
| .rept NR_syscalls-(.-_sys_call_table)/4 |
| .long _sys_ni_syscall |
| .endr |
| |
| /* |
| * Used to save the real RETX, IMASK and SYSCFG when temporarily |
| * storing safe values across the transition from exception to IRQ5. |
| */ |
| _excpt_saved_stuff: |
| .long 0; |
| .long 0; |
| .long 0; |
| |
| _exception_stack: |
| .rept 1024 |
| .long 0; |
| .endr |
| _exception_stack_top: |
| |
| #if ANOMALY_05000261 |
| /* Used by the assembly entry point to work around an anomaly. */ |
| _last_cplb_fault_retx: |
| .long 0; |
| #endif |