| /* |
| * linux/arch/arm26/mm/fault.c |
| * |
| * Copyright (C) 1995 Linus Torvalds |
| * Modifications for ARM processor (c) 1995-2001 Russell King |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| #include <linux/signal.h> |
| #include <linux/sched.h> |
| #include <linux/kernel.h> |
| #include <linux/errno.h> |
| #include <linux/string.h> |
| #include <linux/types.h> |
| #include <linux/ptrace.h> |
| #include <linux/mman.h> |
| #include <linux/mm.h> |
| #include <linux/interrupt.h> |
| #include <linux/proc_fs.h> |
| #include <linux/init.h> |
| |
| #include <asm/system.h> |
| #include <asm/pgtable.h> |
| #include <asm/uaccess.h> //FIXME this header may be bogusly included |
| |
| #include "fault.h" |
| |
| #define FAULT_CODE_LDRSTRPOST 0x80 |
| #define FAULT_CODE_LDRSTRPRE 0x40 |
| #define FAULT_CODE_LDRSTRREG 0x20 |
| #define FAULT_CODE_LDMSTM 0x10 |
| #define FAULT_CODE_LDCSTC 0x08 |
| #define FAULT_CODE_PREFETCH 0x04 |
| #define FAULT_CODE_WRITE 0x02 |
| #define FAULT_CODE_FORCECOW 0x01 |
| |
| #define DO_COW(m) ((m) & (FAULT_CODE_WRITE|FAULT_CODE_FORCECOW)) |
| #define READ_FAULT(m) (!((m) & FAULT_CODE_WRITE)) |
| #define DEBUG |
| /* |
| * This is useful to dump out the page tables associated with |
| * 'addr' in mm 'mm'. |
| */ |
| void show_pte(struct mm_struct *mm, unsigned long addr) |
| { |
| pgd_t *pgd; |
| |
| if (!mm) |
| mm = &init_mm; |
| |
| printk(KERN_ALERT "pgd = %p\n", mm->pgd); |
| pgd = pgd_offset(mm, addr); |
| printk(KERN_ALERT "[%08lx] *pgd=%08lx", addr, pgd_val(*pgd)); |
| |
| do { |
| pmd_t *pmd; |
| pte_t *pte; |
| |
| pmd = pmd_offset(pgd, addr); |
| |
| if (pmd_none(*pmd)) |
| break; |
| |
| if (pmd_bad(*pmd)) { |
| printk("(bad)"); |
| break; |
| } |
| |
| /* We must not map this if we have highmem enabled */ |
| /* FIXME */ |
| pte = pte_offset_map(pmd, addr); |
| printk(", *pte=%08lx", pte_val(*pte)); |
| pte_unmap(pte); |
| } while(0); |
| |
| printk("\n"); |
| } |
| |
| /* |
| * Oops. The kernel tried to access some page that wasn't present. |
| */ |
| static void |
| __do_kernel_fault(struct mm_struct *mm, unsigned long addr, unsigned int fsr, |
| struct pt_regs *regs) |
| { |
| /* |
| * Are we prepared to handle this kernel fault? |
| */ |
| if (fixup_exception(regs)) |
| return; |
| |
| /* |
| * No handler, we'll have to terminate things with extreme prejudice. |
| */ |
| bust_spinlocks(1); |
| printk(KERN_ALERT |
| "Unable to handle kernel %s at virtual address %08lx\n", |
| (addr < PAGE_SIZE) ? "NULL pointer dereference" : |
| "paging request", addr); |
| |
| show_pte(mm, addr); |
| die("Oops", regs, fsr); |
| bust_spinlocks(0); |
| do_exit(SIGKILL); |
| } |
| |
| /* |
| * Something tried to access memory that isn't in our memory map.. |
| * User mode accesses just cause a SIGSEGV |
| */ |
| static void |
| __do_user_fault(struct task_struct *tsk, unsigned long addr, |
| unsigned int fsr, int code, struct pt_regs *regs) |
| { |
| struct siginfo si; |
| |
| #ifdef CONFIG_DEBUG_USER |
| printk("%s: unhandled page fault at 0x%08lx, code 0x%03x\n", |
| tsk->comm, addr, fsr); |
| show_pte(tsk->mm, addr); |
| show_regs(regs); |
| //dump_backtrace(regs, tsk); // FIXME ARM32 dropped this - why? |
| while(1); //FIXME - hack to stop debug going nutso |
| #endif |
| |
| tsk->thread.address = addr; |
| tsk->thread.error_code = fsr; |
| tsk->thread.trap_no = 14; |
| si.si_signo = SIGSEGV; |
| si.si_errno = 0; |
| si.si_code = code; |
| si.si_addr = (void *)addr; |
| force_sig_info(SIGSEGV, &si, tsk); |
| } |
| |
| static int |
| __do_page_fault(struct mm_struct *mm, unsigned long addr, unsigned int fsr, |
| struct task_struct *tsk) |
| { |
| struct vm_area_struct *vma; |
| int fault, mask; |
| |
| vma = find_vma(mm, addr); |
| fault = -2; /* bad map area */ |
| if (!vma) |
| goto out; |
| if (vma->vm_start > addr) |
| goto check_stack; |
| |
| /* |
| * Ok, we have a good vm_area for this |
| * memory access, so we can handle it. |
| */ |
| good_area: |
| if (READ_FAULT(fsr)) /* read? */ |
| mask = VM_READ|VM_EXEC|VM_WRITE; |
| else |
| mask = VM_WRITE; |
| |
| fault = -1; /* bad access type */ |
| if (!(vma->vm_flags & mask)) |
| goto out; |
| |
| /* |
| * If for any reason at all we couldn't handle |
| * the fault, make sure we exit gracefully rather |
| * than endlessly redo the fault. |
| */ |
| survive: |
| fault = handle_mm_fault(mm, vma, addr & PAGE_MASK, DO_COW(fsr)); |
| |
| /* |
| * Handle the "normal" cases first - successful and sigbus |
| */ |
| switch (fault) { |
| case VM_FAULT_MAJOR: |
| tsk->maj_flt++; |
| return fault; |
| case VM_FAULT_MINOR: |
| tsk->min_flt++; |
| case VM_FAULT_SIGBUS: |
| return fault; |
| } |
| |
| fault = -3; /* out of memory */ |
| if (!is_init(tsk)) |
| goto out; |
| |
| /* |
| * If we are out of memory for pid1, |
| * sleep for a while and retry |
| */ |
| yield(); |
| goto survive; |
| |
| check_stack: |
| if (vma->vm_flags & VM_GROWSDOWN && !expand_stack(vma, addr)) |
| goto good_area; |
| out: |
| return fault; |
| } |
| |
| int do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs) |
| { |
| struct task_struct *tsk; |
| struct mm_struct *mm; |
| int fault; |
| |
| tsk = current; |
| mm = tsk->mm; |
| |
| /* |
| * If we're in an interrupt or have no user |
| * context, we must not take the fault.. |
| */ |
| if (in_interrupt() || !mm) |
| goto no_context; |
| |
| down_read(&mm->mmap_sem); |
| fault = __do_page_fault(mm, addr, fsr, tsk); |
| up_read(&mm->mmap_sem); |
| |
| /* |
| * Handle the "normal" case first |
| */ |
| switch (fault) { |
| case VM_FAULT_MINOR: |
| case VM_FAULT_MAJOR: |
| return 0; |
| case VM_FAULT_SIGBUS: |
| goto do_sigbus; |
| } |
| |
| /* |
| * If we are in kernel mode at this point, we |
| * have no context to handle this fault with. |
| * FIXME - is this test right? |
| */ |
| if (!user_mode(regs)){ |
| goto no_context; |
| } |
| |
| if (fault == -3) { |
| /* |
| * We ran out of memory, or some other thing happened to |
| * us that made us unable to handle the page fault gracefully. |
| */ |
| printk("VM: killing process %s\n", tsk->comm); |
| do_exit(SIGKILL); |
| } |
| else{ |
| __do_user_fault(tsk, addr, fsr, fault == -1 ? SEGV_ACCERR : SEGV_MAPERR, regs); |
| } |
| |
| return 0; |
| |
| |
| /* |
| * We ran out of memory, or some other thing happened to us that made |
| * us unable to handle the page fault gracefully. |
| */ |
| do_sigbus: |
| /* |
| * Send a sigbus, regardless of whether we were in kernel |
| * or user mode. |
| */ |
| tsk->thread.address = addr; //FIXME - need other bits setting? |
| tsk->thread.error_code = fsr; |
| tsk->thread.trap_no = 14; |
| force_sig(SIGBUS, tsk); |
| #ifdef CONFIG_DEBUG_USER |
| printk(KERN_DEBUG "%s: sigbus at 0x%08lx, pc=0x%08lx\n", |
| current->comm, addr, instruction_pointer(regs)); |
| #endif |
| |
| /* Kernel mode? Handle exceptions or die */ |
| if (user_mode(regs)) |
| return 0; |
| |
| no_context: |
| __do_kernel_fault(mm, addr, fsr, regs); |
| return 0; |
| } |
| |
| /* |
| * Handle a data abort. Note that we have to handle a range of addresses |
| * on ARM2/3 for ldm. If both pages are zero-mapped, then we have to force |
| * a copy-on-write. However, on the second page, we always force COW. |
| */ |
| asmlinkage void |
| do_DataAbort(unsigned long min_addr, unsigned long max_addr, int mode, struct pt_regs *regs) |
| { |
| do_page_fault(min_addr, mode, regs); |
| |
| if ((min_addr ^ max_addr) >> PAGE_SHIFT){ |
| do_page_fault(max_addr, mode | FAULT_CODE_FORCECOW, regs); |
| } |
| } |
| |
| asmlinkage int |
| do_PrefetchAbort(unsigned long addr, struct pt_regs *regs) |
| { |
| #if 0 |
| if (the memc mapping for this page exists) { |
| printk ("Page in, but got abort (undefined instruction?)\n"); |
| return 0; |
| } |
| #endif |
| do_page_fault(addr, FAULT_CODE_PREFETCH, regs); |
| return 1; |
| } |
| |