| /* Copyright (c) 2008-2012, Code Aurora Forum. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| */ |
| /* |
| * SMD Packet Driver -- Provides a binary SMD non-muxed packet port |
| * interface. |
| */ |
| |
| #include <linux/slab.h> |
| #include <linux/cdev.h> |
| #include <linux/module.h> |
| #include <linux/fs.h> |
| #include <linux/device.h> |
| #include <linux/sched.h> |
| #include <linux/spinlock.h> |
| #include <linux/mutex.h> |
| #include <linux/delay.h> |
| #include <linux/uaccess.h> |
| #include <linux/workqueue.h> |
| #include <linux/platform_device.h> |
| #include <linux/completion.h> |
| #include <linux/msm_smd_pkt.h> |
| #include <linux/poll.h> |
| #include <asm/ioctls.h> |
| #include <linux/wakelock.h> |
| |
| #include <mach/msm_smd.h> |
| #include <mach/peripheral-loader.h> |
| |
| #include "smd_private.h" |
| #ifdef CONFIG_ARCH_FSM9XXX |
| #define NUM_SMD_PKT_PORTS 4 |
| #else |
| #define NUM_SMD_PKT_PORTS 15 |
| #endif |
| |
| #define PDRIVER_NAME_MAX_SIZE 32 |
| #define LOOPBACK_INX (NUM_SMD_PKT_PORTS - 1) |
| |
| #define DEVICE_NAME "smdpkt" |
| #define WAKELOCK_TIMEOUT (2*HZ) |
| |
| struct smd_pkt_dev { |
| struct cdev cdev; |
| struct device *devicep; |
| void *pil; |
| char pdriver_name[PDRIVER_NAME_MAX_SIZE]; |
| struct platform_driver driver; |
| |
| struct smd_channel *ch; |
| struct mutex ch_lock; |
| struct mutex rx_lock; |
| struct mutex tx_lock; |
| wait_queue_head_t ch_read_wait_queue; |
| wait_queue_head_t ch_write_wait_queue; |
| wait_queue_head_t ch_opened_wait_queue; |
| |
| int i; |
| |
| int blocking_write; |
| int is_open; |
| int poll_mode; |
| unsigned ch_size; |
| uint open_modem_wait; |
| |
| int has_reset; |
| int do_reset_notification; |
| struct completion ch_allocated; |
| struct wake_lock pa_wake_lock; /* Packet Arrival Wake lock*/ |
| struct work_struct packet_arrival_work; |
| struct spinlock pa_spinlock; |
| int wakelock_locked; |
| } *smd_pkt_devp[NUM_SMD_PKT_PORTS]; |
| |
| struct class *smd_pkt_classp; |
| static dev_t smd_pkt_number; |
| static struct delayed_work loopback_work; |
| static void check_and_wakeup_reader(struct smd_pkt_dev *smd_pkt_devp); |
| static void check_and_wakeup_writer(struct smd_pkt_dev *smd_pkt_devp); |
| static uint32_t is_modem_smsm_inited(void); |
| |
| static int msm_smd_pkt_debug_mask; |
| module_param_named(debug_mask, msm_smd_pkt_debug_mask, |
| int, S_IRUGO | S_IWUSR | S_IWGRP); |
| |
| enum { |
| SMD_PKT_STATUS = 1U << 0, |
| SMD_PKT_READ = 1U << 1, |
| SMD_PKT_WRITE = 1U << 2, |
| SMD_PKT_READ_DUMP_BUFFER = 1U << 3, |
| SMD_PKT_WRITE_DUMP_BUFFER = 1U << 4, |
| SMD_PKT_POLL = 1U << 5, |
| }; |
| |
| #define DEBUG |
| |
| #ifdef DEBUG |
| #define D_STATUS(x...) \ |
| do { \ |
| if (msm_smd_pkt_debug_mask & SMD_PKT_STATUS) \ |
| pr_info("Status: "x); \ |
| } while (0) |
| |
| #define D_READ(x...) \ |
| do { \ |
| if (msm_smd_pkt_debug_mask & SMD_PKT_READ) \ |
| pr_info("Read: "x); \ |
| } while (0) |
| |
| #define D_WRITE(x...) \ |
| do { \ |
| if (msm_smd_pkt_debug_mask & SMD_PKT_WRITE) \ |
| pr_info("Write: "x); \ |
| } while (0) |
| |
| #define D_READ_DUMP_BUFFER(prestr, cnt, buf) \ |
| do { \ |
| if (msm_smd_pkt_debug_mask & SMD_PKT_READ_DUMP_BUFFER) \ |
| print_hex_dump(KERN_INFO, prestr, \ |
| DUMP_PREFIX_NONE, 16, 1, \ |
| buf, cnt, 1); \ |
| } while (0) |
| |
| #define D_WRITE_DUMP_BUFFER(prestr, cnt, buf) \ |
| do { \ |
| if (msm_smd_pkt_debug_mask & SMD_PKT_WRITE_DUMP_BUFFER) \ |
| print_hex_dump(KERN_INFO, prestr, \ |
| DUMP_PREFIX_NONE, 16, 1, \ |
| buf, cnt, 1); \ |
| } while (0) |
| |
| #define D_POLL(x...) \ |
| do { \ |
| if (msm_smd_pkt_debug_mask & SMD_PKT_POLL) \ |
| pr_info("Poll: "x); \ |
| } while (0) |
| #else |
| #define D_STATUS(x...) do {} while (0) |
| #define D_READ(x...) do {} while (0) |
| #define D_WRITE(x...) do {} while (0) |
| #define D_READ_DUMP_BUFFER(prestr, cnt, buf) do {} while (0) |
| #define D_WRITE_DUMP_BUFFER(prestr, cnt, buf) do {} while (0) |
| #define D_POLL(x...) do {} while (0) |
| #endif |
| |
| static ssize_t open_timeout_store(struct device *d, |
| struct device_attribute *attr, |
| const char *buf, |
| size_t n) |
| { |
| int i; |
| unsigned long tmp; |
| for (i = 0; i < NUM_SMD_PKT_PORTS; ++i) { |
| if (smd_pkt_devp[i]->devicep == d) |
| break; |
| } |
| if (i >= NUM_SMD_PKT_PORTS) { |
| pr_err("%s: unable to match device to valid smd_pkt port\n", |
| __func__); |
| return -EINVAL; |
| } |
| if (!strict_strtoul(buf, 10, &tmp)) { |
| smd_pkt_devp[i]->open_modem_wait = tmp; |
| return n; |
| } else { |
| pr_err("%s: unable to convert: %s to an int\n", __func__, |
| buf); |
| return -EINVAL; |
| } |
| } |
| |
| static ssize_t open_timeout_show(struct device *d, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| int i; |
| for (i = 0; i < NUM_SMD_PKT_PORTS; ++i) { |
| if (smd_pkt_devp[i]->devicep == d) |
| break; |
| } |
| if (i >= NUM_SMD_PKT_PORTS) { |
| pr_err("%s: unable to match device to valid smd_pkt port\n", |
| __func__); |
| return -EINVAL; |
| } |
| return snprintf(buf, PAGE_SIZE, "%d\n", |
| smd_pkt_devp[i]->open_modem_wait); |
| } |
| |
| static DEVICE_ATTR(open_timeout, 0664, open_timeout_show, open_timeout_store); |
| |
| static int notify_reset(struct smd_pkt_dev *smd_pkt_devp) |
| { |
| smd_pkt_devp->do_reset_notification = 0; |
| |
| return -ENETRESET; |
| } |
| |
| static void clean_and_signal(struct smd_pkt_dev *smd_pkt_devp) |
| { |
| smd_pkt_devp->do_reset_notification = 1; |
| smd_pkt_devp->has_reset = 1; |
| |
| smd_pkt_devp->is_open = 0; |
| |
| wake_up(&smd_pkt_devp->ch_read_wait_queue); |
| wake_up(&smd_pkt_devp->ch_write_wait_queue); |
| wake_up_interruptible(&smd_pkt_devp->ch_opened_wait_queue); |
| D_STATUS("%s smd_pkt_dev id:%d\n", __func__, smd_pkt_devp->i); |
| } |
| |
| static void loopback_probe_worker(struct work_struct *work) |
| { |
| |
| /* Wait for the modem SMSM to be inited for the SMD |
| ** Loopback channel to be allocated at the modem. Since |
| ** the wait need to be done atmost once, using msleep |
| ** doesn't degrade the performance. */ |
| if (!is_modem_smsm_inited()) |
| schedule_delayed_work(&loopback_work, msecs_to_jiffies(1000)); |
| else |
| smsm_change_state(SMSM_APPS_STATE, |
| 0, SMSM_SMD_LOOPBACK); |
| |
| } |
| |
| static void packet_arrival_worker(struct work_struct *work) |
| { |
| struct smd_pkt_dev *smd_pkt_devp; |
| unsigned long flags; |
| |
| smd_pkt_devp = container_of(work, struct smd_pkt_dev, |
| packet_arrival_work); |
| mutex_lock(&smd_pkt_devp->ch_lock); |
| spin_lock_irqsave(&smd_pkt_devp->pa_spinlock, flags); |
| if (smd_pkt_devp->ch && smd_pkt_devp->wakelock_locked) { |
| D_READ("%s locking smd_pkt_dev id:%d wakelock\n", |
| __func__, smd_pkt_devp->i); |
| wake_lock_timeout(&smd_pkt_devp->pa_wake_lock, |
| WAKELOCK_TIMEOUT); |
| } |
| spin_unlock_irqrestore(&smd_pkt_devp->pa_spinlock, flags); |
| mutex_unlock(&smd_pkt_devp->ch_lock); |
| } |
| |
| static long smd_pkt_ioctl(struct file *file, unsigned int cmd, |
| unsigned long arg) |
| { |
| int ret; |
| struct smd_pkt_dev *smd_pkt_devp; |
| |
| smd_pkt_devp = file->private_data; |
| if (!smd_pkt_devp) |
| return -EINVAL; |
| |
| switch (cmd) { |
| case TIOCMGET: |
| D_STATUS("%s TIOCMGET command on smd_pkt_dev id:%d\n", |
| __func__, smd_pkt_devp->i); |
| ret = smd_tiocmget(smd_pkt_devp->ch); |
| break; |
| case TIOCMSET: |
| D_STATUS("%s TIOCSET command on smd_pkt_dev id:%d\n", |
| __func__, smd_pkt_devp->i); |
| ret = smd_tiocmset(smd_pkt_devp->ch, arg, ~arg); |
| break; |
| case SMD_PKT_IOCTL_BLOCKING_WRITE: |
| ret = get_user(smd_pkt_devp->blocking_write, (int *)arg); |
| break; |
| default: |
| pr_err("%s: Unrecognized ioctl command %d\n", __func__, cmd); |
| ret = -1; |
| } |
| |
| return ret; |
| } |
| |
| ssize_t smd_pkt_read(struct file *file, |
| char __user *buf, |
| size_t count, |
| loff_t *ppos) |
| { |
| int r; |
| int bytes_read; |
| int pkt_size; |
| struct smd_pkt_dev *smd_pkt_devp; |
| unsigned long flags; |
| |
| smd_pkt_devp = file->private_data; |
| |
| if (!smd_pkt_devp) { |
| pr_err("%s on NULL smd_pkt_dev\n", __func__); |
| return -EINVAL; |
| } |
| |
| if (!smd_pkt_devp->ch) { |
| pr_err("%s on a closed smd_pkt_dev id:%d\n", |
| __func__, smd_pkt_devp->i); |
| return -EINVAL; |
| } |
| |
| if (smd_pkt_devp->do_reset_notification) { |
| /* notify client that a reset occurred */ |
| pr_err("%s notifying reset for smd_pkt_dev id:%d\n", |
| __func__, smd_pkt_devp->i); |
| return notify_reset(smd_pkt_devp); |
| } |
| D_READ("Begin %s on smd_pkt_dev id:%d buffer_size %d\n", |
| __func__, smd_pkt_devp->i, count); |
| |
| wait_for_packet: |
| r = wait_event_interruptible(smd_pkt_devp->ch_read_wait_queue, |
| !smd_pkt_devp->ch || |
| (smd_cur_packet_size(smd_pkt_devp->ch) > 0 |
| && smd_read_avail(smd_pkt_devp->ch)) || |
| smd_pkt_devp->has_reset); |
| |
| mutex_lock(&smd_pkt_devp->rx_lock); |
| if (smd_pkt_devp->has_reset) { |
| mutex_unlock(&smd_pkt_devp->rx_lock); |
| pr_err("%s notifying reset for smd_pkt_dev id:%d\n", |
| __func__, smd_pkt_devp->i); |
| return notify_reset(smd_pkt_devp); |
| } |
| |
| if (!smd_pkt_devp->ch) { |
| mutex_unlock(&smd_pkt_devp->rx_lock); |
| pr_err("%s on a closed smd_pkt_dev id:%d\n", |
| __func__, smd_pkt_devp->i); |
| return -EINVAL; |
| } |
| |
| if (r < 0) { |
| mutex_unlock(&smd_pkt_devp->rx_lock); |
| /* qualify error message */ |
| if (r != -ERESTARTSYS) { |
| /* we get this anytime a signal comes in */ |
| pr_err("%s: wait_event_interruptible on smd_pkt_dev" |
| " id:%d ret %i\n", |
| __func__, smd_pkt_devp->i, r); |
| } |
| return r; |
| } |
| |
| /* Here we have a whole packet waiting for us */ |
| pkt_size = smd_cur_packet_size(smd_pkt_devp->ch); |
| |
| if (!pkt_size) { |
| pr_err("%s: No data on smd_pkt_dev id:%d, False wakeup\n", |
| __func__, smd_pkt_devp->i); |
| mutex_unlock(&smd_pkt_devp->rx_lock); |
| goto wait_for_packet; |
| } |
| |
| if (pkt_size > count) { |
| pr_err("%s: failure on smd_pkt_dev id: %d - packet size %d" |
| " > buffer size %d,", __func__, smd_pkt_devp->i, |
| pkt_size, count); |
| mutex_unlock(&smd_pkt_devp->rx_lock); |
| return -ETOOSMALL; |
| } |
| |
| bytes_read = 0; |
| do { |
| r = smd_read_user_buffer(smd_pkt_devp->ch, |
| (buf + bytes_read), |
| (pkt_size - bytes_read)); |
| if (r < 0) { |
| mutex_unlock(&smd_pkt_devp->rx_lock); |
| if (smd_pkt_devp->has_reset) { |
| pr_err("%s notifying reset for smd_pkt_dev" |
| " id:%d\n", __func__, smd_pkt_devp->i); |
| return notify_reset(smd_pkt_devp); |
| } |
| pr_err("%s Error while reading %d\n", __func__, r); |
| return r; |
| } |
| bytes_read += r; |
| if (pkt_size != bytes_read) |
| wait_event(smd_pkt_devp->ch_read_wait_queue, |
| smd_read_avail(smd_pkt_devp->ch) || |
| smd_pkt_devp->has_reset); |
| if (smd_pkt_devp->has_reset) { |
| mutex_unlock(&smd_pkt_devp->rx_lock); |
| pr_err("%s notifying reset for smd_pkt_dev id:%d\n", |
| __func__, smd_pkt_devp->i); |
| return notify_reset(smd_pkt_devp); |
| } |
| } while (pkt_size != bytes_read); |
| D_READ_DUMP_BUFFER("Read: ", (bytes_read > 16 ? 16 : bytes_read), buf); |
| mutex_unlock(&smd_pkt_devp->rx_lock); |
| |
| mutex_lock(&smd_pkt_devp->ch_lock); |
| spin_lock_irqsave(&smd_pkt_devp->pa_spinlock, flags); |
| if (smd_pkt_devp->poll_mode && |
| !smd_cur_packet_size(smd_pkt_devp->ch)) { |
| wake_unlock(&smd_pkt_devp->pa_wake_lock); |
| smd_pkt_devp->wakelock_locked = 0; |
| smd_pkt_devp->poll_mode = 0; |
| D_READ("%s unlocked smd_pkt_dev id:%d wakelock\n", |
| __func__, smd_pkt_devp->i); |
| } |
| spin_unlock_irqrestore(&smd_pkt_devp->pa_spinlock, flags); |
| mutex_unlock(&smd_pkt_devp->ch_lock); |
| |
| D_READ("Finished %s on smd_pkt_dev id:%d %d bytes\n", |
| __func__, smd_pkt_devp->i, bytes_read); |
| |
| /* check and wakeup read threads waiting on this device */ |
| check_and_wakeup_reader(smd_pkt_devp); |
| |
| return bytes_read; |
| } |
| |
| ssize_t smd_pkt_write(struct file *file, |
| const char __user *buf, |
| size_t count, |
| loff_t *ppos) |
| { |
| int r = 0, bytes_written; |
| struct smd_pkt_dev *smd_pkt_devp; |
| DEFINE_WAIT(write_wait); |
| |
| smd_pkt_devp = file->private_data; |
| |
| if (!smd_pkt_devp) { |
| pr_err("%s on NULL smd_pkt_dev\n", __func__); |
| return -EINVAL; |
| } |
| |
| if (!smd_pkt_devp->ch) { |
| pr_err("%s on a closed smd_pkt_dev id:%d\n", |
| __func__, smd_pkt_devp->i); |
| return -EINVAL; |
| } |
| |
| if (smd_pkt_devp->do_reset_notification || smd_pkt_devp->has_reset) { |
| pr_err("%s notifying reset for smd_pkt_dev id:%d\n", |
| __func__, smd_pkt_devp->i); |
| /* notify client that a reset occurred */ |
| return notify_reset(smd_pkt_devp); |
| } |
| D_WRITE("Begin %s on smd_pkt_dev id:%d data_size %d\n", |
| __func__, smd_pkt_devp->i, count); |
| |
| mutex_lock(&smd_pkt_devp->tx_lock); |
| if (!smd_pkt_devp->blocking_write) { |
| if (smd_write_avail(smd_pkt_devp->ch) < count) { |
| pr_err("%s: Not enough space in smd_pkt_dev id:%d\n", |
| __func__, smd_pkt_devp->i); |
| mutex_unlock(&smd_pkt_devp->tx_lock); |
| return -ENOMEM; |
| } |
| } |
| |
| r = smd_write_start(smd_pkt_devp->ch, count); |
| if (r < 0) { |
| mutex_unlock(&smd_pkt_devp->tx_lock); |
| pr_err("%s: Error:%d in smd_pkt_dev id:%d @ smd_write_start\n", |
| __func__, r, smd_pkt_devp->i); |
| return r; |
| } |
| |
| bytes_written = 0; |
| do { |
| prepare_to_wait(&smd_pkt_devp->ch_write_wait_queue, |
| &write_wait, TASK_UNINTERRUPTIBLE); |
| if (!smd_write_avail(smd_pkt_devp->ch) && |
| !smd_pkt_devp->has_reset) { |
| smd_enable_read_intr(smd_pkt_devp->ch); |
| schedule(); |
| } |
| finish_wait(&smd_pkt_devp->ch_write_wait_queue, &write_wait); |
| smd_disable_read_intr(smd_pkt_devp->ch); |
| |
| if (smd_pkt_devp->has_reset) { |
| mutex_unlock(&smd_pkt_devp->tx_lock); |
| pr_err("%s notifying reset for smd_pkt_dev id:%d\n", |
| __func__, smd_pkt_devp->i); |
| return notify_reset(smd_pkt_devp); |
| } else { |
| r = smd_write_segment(smd_pkt_devp->ch, |
| (void *)(buf + bytes_written), |
| (count - bytes_written), 1); |
| if (r < 0) { |
| mutex_unlock(&smd_pkt_devp->tx_lock); |
| if (smd_pkt_devp->has_reset) { |
| pr_err("%s notifying reset for" |
| " smd_pkt_dev id:%d\n", |
| __func__, smd_pkt_devp->i); |
| return notify_reset(smd_pkt_devp); |
| } |
| pr_err("%s on smd_pkt_dev id:%d failed r:%d\n", |
| __func__, smd_pkt_devp->i, r); |
| return r; |
| } |
| bytes_written += r; |
| } |
| } while (bytes_written != count); |
| smd_write_end(smd_pkt_devp->ch); |
| mutex_unlock(&smd_pkt_devp->tx_lock); |
| D_WRITE_DUMP_BUFFER("Write: ", |
| (bytes_written > 16 ? 16 : bytes_written), buf); |
| D_WRITE("Finished %s on smd_pkt_dev id:%d %d bytes\n", |
| __func__, smd_pkt_devp->i, count); |
| |
| return count; |
| } |
| |
| static unsigned int smd_pkt_poll(struct file *file, poll_table *wait) |
| { |
| struct smd_pkt_dev *smd_pkt_devp; |
| unsigned int mask = 0; |
| |
| smd_pkt_devp = file->private_data; |
| if (!smd_pkt_devp) { |
| pr_err("%s on a NULL device\n", __func__); |
| return POLLERR; |
| } |
| |
| smd_pkt_devp->poll_mode = 1; |
| poll_wait(file, &smd_pkt_devp->ch_read_wait_queue, wait); |
| mutex_lock(&smd_pkt_devp->ch_lock); |
| if (smd_pkt_devp->has_reset || !smd_pkt_devp->ch) { |
| mutex_unlock(&smd_pkt_devp->ch_lock); |
| pr_err("%s notifying reset for smd_pkt_dev id:%d\n", |
| __func__, smd_pkt_devp->i); |
| return POLLERR; |
| } |
| |
| if (smd_read_avail(smd_pkt_devp->ch)) { |
| mask |= POLLIN | POLLRDNORM; |
| D_POLL("%s sets POLLIN for smd_pkt_dev id: %d\n", |
| __func__, smd_pkt_devp->i); |
| } |
| mutex_unlock(&smd_pkt_devp->ch_lock); |
| |
| return mask; |
| } |
| |
| static void check_and_wakeup_reader(struct smd_pkt_dev *smd_pkt_devp) |
| { |
| int sz; |
| unsigned long flags; |
| |
| if (!smd_pkt_devp) { |
| pr_err("%s on a NULL device\n", __func__); |
| return; |
| } |
| |
| if (!smd_pkt_devp->ch) { |
| pr_err("%s on a closed smd_pkt_dev id:%d\n", |
| __func__, smd_pkt_devp->i); |
| return; |
| } |
| |
| sz = smd_cur_packet_size(smd_pkt_devp->ch); |
| if (sz == 0) { |
| D_READ("%s: No packet in smd_pkt_dev id:%d\n", |
| __func__, smd_pkt_devp->i); |
| return; |
| } |
| if (!smd_read_avail(smd_pkt_devp->ch)) { |
| D_READ("%s: packet size is %d in smd_pkt_dev id:%d -" |
| " but the data isn't here\n", |
| __func__, sz, smd_pkt_devp->i); |
| return; |
| } |
| |
| /* here we have a packet of size sz ready */ |
| spin_lock_irqsave(&smd_pkt_devp->pa_spinlock, flags); |
| wake_lock(&smd_pkt_devp->pa_wake_lock); |
| smd_pkt_devp->wakelock_locked = 1; |
| spin_unlock_irqrestore(&smd_pkt_devp->pa_spinlock, flags); |
| wake_up(&smd_pkt_devp->ch_read_wait_queue); |
| schedule_work(&smd_pkt_devp->packet_arrival_work); |
| D_READ("%s: wake_up smd_pkt_dev id:%d\n", __func__, smd_pkt_devp->i); |
| } |
| |
| static void check_and_wakeup_writer(struct smd_pkt_dev *smd_pkt_devp) |
| { |
| int sz; |
| |
| if (!smd_pkt_devp) { |
| pr_err("%s on a NULL device\n", __func__); |
| return; |
| } |
| |
| if (!smd_pkt_devp->ch) { |
| pr_err("%s on a closed smd_pkt_dev id:%d\n", |
| __func__, smd_pkt_devp->i); |
| return; |
| } |
| |
| sz = smd_write_avail(smd_pkt_devp->ch); |
| if (sz) { |
| D_WRITE("%s: %d bytes write space in smd_pkt_dev id:%d\n", |
| __func__, sz, smd_pkt_devp->i); |
| smd_disable_read_intr(smd_pkt_devp->ch); |
| wake_up(&smd_pkt_devp->ch_write_wait_queue); |
| } |
| } |
| |
| static void ch_notify(void *priv, unsigned event) |
| { |
| struct smd_pkt_dev *smd_pkt_devp = priv; |
| |
| if (smd_pkt_devp->ch == 0) { |
| pr_err("%s on a closed smd_pkt_dev id:%d\n", |
| __func__, smd_pkt_devp->i); |
| return; |
| } |
| |
| switch (event) { |
| case SMD_EVENT_DATA: { |
| D_STATUS("%s: DATA event in smd_pkt_dev id:%d\n", |
| __func__, smd_pkt_devp->i); |
| check_and_wakeup_reader(smd_pkt_devp); |
| if (smd_pkt_devp->blocking_write) |
| check_and_wakeup_writer(smd_pkt_devp); |
| break; |
| } |
| case SMD_EVENT_OPEN: |
| D_STATUS("%s: OPEN event in smd_pkt_dev id:%d\n", |
| __func__, smd_pkt_devp->i); |
| smd_pkt_devp->has_reset = 0; |
| smd_pkt_devp->is_open = 1; |
| wake_up_interruptible(&smd_pkt_devp->ch_opened_wait_queue); |
| break; |
| case SMD_EVENT_CLOSE: |
| D_STATUS("%s: CLOSE event in smd_pkt_dev id:%d\n", |
| __func__, smd_pkt_devp->i); |
| smd_pkt_devp->is_open = 0; |
| /* put port into reset state */ |
| clean_and_signal(smd_pkt_devp); |
| if (smd_pkt_devp->i == LOOPBACK_INX) |
| schedule_delayed_work(&loopback_work, |
| msecs_to_jiffies(1000)); |
| break; |
| } |
| } |
| |
| #ifdef CONFIG_ARCH_FSM9XXX |
| static char *smd_pkt_dev_name[] = { |
| "smdcntl1", |
| "smdcntl2", |
| "smd22", |
| "smd_pkt_loopback", |
| }; |
| |
| static char *smd_ch_name[] = { |
| "DATA6_CNTL", |
| "DATA7_CNTL", |
| "DATA22", |
| "LOOPBACK", |
| }; |
| |
| static uint32_t smd_ch_edge[] = { |
| SMD_APPS_QDSP, |
| SMD_APPS_QDSP, |
| SMD_APPS_QDSP, |
| SMD_APPS_QDSP |
| }; |
| #else |
| static char *smd_pkt_dev_name[] = { |
| "smdcntl0", |
| "smdcntl1", |
| "smdcntl2", |
| "smdcntl3", |
| "smdcntl4", |
| "smdcntl5", |
| "smdcntl6", |
| "smdcntl7", |
| "smd22", |
| "smd_sns_dsps", |
| "apr_apps2", |
| "smdcntl8", |
| "smd_sns_adsp", |
| "smd_cxm_qmi", |
| "smd_pkt_loopback", |
| }; |
| |
| static char *smd_ch_name[] = { |
| "DATA5_CNTL", |
| "DATA6_CNTL", |
| "DATA7_CNTL", |
| "DATA8_CNTL", |
| "DATA9_CNTL", |
| "DATA12_CNTL", |
| "DATA13_CNTL", |
| "DATA14_CNTL", |
| "DATA22", |
| "SENSOR", |
| "apr_apps2", |
| "DATA40_CNTL", |
| "SENSOR", |
| "CXM_QMI_PORT_8064", |
| "LOOPBACK", |
| }; |
| |
| static uint32_t smd_ch_edge[] = { |
| SMD_APPS_MODEM, |
| SMD_APPS_MODEM, |
| SMD_APPS_MODEM, |
| SMD_APPS_MODEM, |
| SMD_APPS_MODEM, |
| SMD_APPS_MODEM, |
| SMD_APPS_MODEM, |
| SMD_APPS_MODEM, |
| SMD_APPS_MODEM, |
| SMD_APPS_DSPS, |
| SMD_APPS_QDSP, |
| SMD_APPS_MODEM, |
| SMD_APPS_QDSP, |
| SMD_APPS_WCNSS, |
| SMD_APPS_MODEM, |
| }; |
| #endif |
| module_param_named(loopback_edge, smd_ch_edge[LOOPBACK_INX], |
| int, S_IRUGO | S_IWUSR | S_IWGRP); |
| |
| static int smd_pkt_dummy_probe(struct platform_device *pdev) |
| { |
| int i; |
| |
| for (i = 0; i < NUM_SMD_PKT_PORTS; i++) { |
| if (smd_ch_edge[i] == pdev->id |
| && !strncmp(pdev->name, smd_ch_name[i], |
| SMD_MAX_CH_NAME_LEN) |
| && smd_pkt_devp[i]->driver.probe) { |
| complete_all(&smd_pkt_devp[i]->ch_allocated); |
| D_STATUS("%s allocated SMD ch for smd_pkt_dev id:%d\n", |
| __func__, i); |
| break; |
| } |
| } |
| return 0; |
| } |
| |
| static uint32_t is_modem_smsm_inited(void) |
| { |
| uint32_t modem_state; |
| uint32_t ready_state = (SMSM_INIT | SMSM_SMDINIT); |
| |
| modem_state = smsm_get_state(SMSM_MODEM_STATE); |
| return (modem_state & ready_state) == ready_state; |
| } |
| |
| int smd_pkt_open(struct inode *inode, struct file *file) |
| { |
| int r = 0; |
| struct smd_pkt_dev *smd_pkt_devp; |
| const char *peripheral = NULL; |
| |
| smd_pkt_devp = container_of(inode->i_cdev, struct smd_pkt_dev, cdev); |
| |
| if (!smd_pkt_devp) { |
| pr_err("%s on a NULL device\n", __func__); |
| return -EINVAL; |
| } |
| D_STATUS("Begin %s on smd_pkt_dev id:%d\n", __func__, smd_pkt_devp->i); |
| |
| file->private_data = smd_pkt_devp; |
| |
| mutex_lock(&smd_pkt_devp->ch_lock); |
| if (smd_pkt_devp->ch == 0) { |
| wake_lock_init(&smd_pkt_devp->pa_wake_lock, WAKE_LOCK_SUSPEND, |
| smd_pkt_dev_name[smd_pkt_devp->i]); |
| INIT_WORK(&smd_pkt_devp->packet_arrival_work, |
| packet_arrival_worker); |
| init_completion(&smd_pkt_devp->ch_allocated); |
| smd_pkt_devp->driver.probe = smd_pkt_dummy_probe; |
| scnprintf(smd_pkt_devp->pdriver_name, PDRIVER_NAME_MAX_SIZE, |
| "%s", smd_ch_name[smd_pkt_devp->i]); |
| smd_pkt_devp->driver.driver.name = smd_pkt_devp->pdriver_name; |
| smd_pkt_devp->driver.driver.owner = THIS_MODULE; |
| r = platform_driver_register(&smd_pkt_devp->driver); |
| if (r) { |
| pr_err("%s: %s Platform driver reg. failed\n", |
| __func__, smd_ch_name[smd_pkt_devp->i]); |
| goto out; |
| } |
| |
| peripheral = smd_edge_to_subsystem( |
| smd_ch_edge[smd_pkt_devp->i]); |
| if (peripheral) { |
| smd_pkt_devp->pil = pil_get(peripheral); |
| if (IS_ERR(smd_pkt_devp->pil)) { |
| r = PTR_ERR(smd_pkt_devp->pil); |
| pr_err("%s failed on smd_pkt_dev id:%d -" |
| " pil_get failed for %s\n", __func__, |
| smd_pkt_devp->i, peripheral); |
| goto release_pd; |
| } |
| |
| /* Wait for the modem SMSM to be inited for the SMD |
| ** Loopback channel to be allocated at the modem. Since |
| ** the wait need to be done atmost once, using msleep |
| ** doesn't degrade the performance. */ |
| if (!strncmp(smd_ch_name[smd_pkt_devp->i], "LOOPBACK", |
| SMD_MAX_CH_NAME_LEN)) { |
| if (!is_modem_smsm_inited()) |
| msleep(5000); |
| smsm_change_state(SMSM_APPS_STATE, |
| 0, SMSM_SMD_LOOPBACK); |
| msleep(100); |
| } |
| |
| /* |
| * Wait for a packet channel to be allocated so we know |
| * the modem is ready enough. |
| */ |
| if (smd_pkt_devp->open_modem_wait) { |
| r = wait_for_completion_interruptible_timeout( |
| &smd_pkt_devp->ch_allocated, |
| msecs_to_jiffies( |
| smd_pkt_devp->open_modem_wait |
| * 1000)); |
| if (r == 0) |
| r = -ETIMEDOUT; |
| if (r < 0) { |
| pr_err("%s: wait on smd_pkt_dev id:%d" |
| " allocation failed rc:%d\n", |
| __func__, smd_pkt_devp->i, r); |
| goto release_pil; |
| } |
| } |
| } |
| |
| r = smd_named_open_on_edge(smd_ch_name[smd_pkt_devp->i], |
| smd_ch_edge[smd_pkt_devp->i], |
| &smd_pkt_devp->ch, |
| smd_pkt_devp, |
| ch_notify); |
| if (r < 0) { |
| pr_err("%s: %s open failed %d\n", __func__, |
| smd_ch_name[smd_pkt_devp->i], r); |
| goto release_pil; |
| } |
| |
| r = wait_event_interruptible_timeout( |
| smd_pkt_devp->ch_opened_wait_queue, |
| smd_pkt_devp->is_open, (2 * HZ)); |
| if (r == 0) { |
| r = -ETIMEDOUT; |
| /* close the ch to sync smd's state with smd_pkt */ |
| smd_close(smd_pkt_devp->ch); |
| smd_pkt_devp->ch = NULL; |
| } |
| |
| if (r < 0) { |
| pr_err("%s: wait on smd_pkt_dev id:%d OPEN event failed" |
| " rc:%d\n", __func__, smd_pkt_devp->i, r); |
| } else if (!smd_pkt_devp->is_open) { |
| pr_err("%s: Invalid OPEN event on smd_pkt_dev id:%d\n", |
| __func__, smd_pkt_devp->i); |
| r = -ENODEV; |
| } else { |
| smd_disable_read_intr(smd_pkt_devp->ch); |
| smd_pkt_devp->ch_size = |
| smd_write_avail(smd_pkt_devp->ch); |
| r = 0; |
| D_STATUS("Finished %s on smd_pkt_dev id:%d\n", |
| __func__, smd_pkt_devp->i); |
| } |
| } |
| release_pil: |
| if (peripheral && (r < 0)) |
| pil_put(smd_pkt_devp->pil); |
| |
| release_pd: |
| if (r < 0) { |
| platform_driver_unregister(&smd_pkt_devp->driver); |
| smd_pkt_devp->driver.probe = NULL; |
| } |
| out: |
| if (!smd_pkt_devp->ch) |
| wake_lock_destroy(&smd_pkt_devp->pa_wake_lock); |
| |
| mutex_unlock(&smd_pkt_devp->ch_lock); |
| |
| |
| return r; |
| } |
| |
| int smd_pkt_release(struct inode *inode, struct file *file) |
| { |
| int r = 0; |
| struct smd_pkt_dev *smd_pkt_devp = file->private_data; |
| |
| if (!smd_pkt_devp) { |
| pr_err("%s on a NULL device\n", __func__); |
| return -EINVAL; |
| } |
| D_STATUS("Begin %s on smd_pkt_dev id:%d\n", |
| __func__, smd_pkt_devp->i); |
| |
| clean_and_signal(smd_pkt_devp); |
| |
| mutex_lock(&smd_pkt_devp->ch_lock); |
| mutex_lock(&smd_pkt_devp->rx_lock); |
| mutex_lock(&smd_pkt_devp->tx_lock); |
| if (smd_pkt_devp->ch != 0) { |
| r = smd_close(smd_pkt_devp->ch); |
| smd_pkt_devp->ch = 0; |
| smd_pkt_devp->blocking_write = 0; |
| smd_pkt_devp->poll_mode = 0; |
| platform_driver_unregister(&smd_pkt_devp->driver); |
| smd_pkt_devp->driver.probe = NULL; |
| if (smd_pkt_devp->pil) |
| pil_put(smd_pkt_devp->pil); |
| } |
| mutex_unlock(&smd_pkt_devp->tx_lock); |
| mutex_unlock(&smd_pkt_devp->rx_lock); |
| mutex_unlock(&smd_pkt_devp->ch_lock); |
| |
| smd_pkt_devp->has_reset = 0; |
| smd_pkt_devp->do_reset_notification = 0; |
| smd_pkt_devp->wakelock_locked = 0; |
| wake_lock_destroy(&smd_pkt_devp->pa_wake_lock); |
| D_STATUS("Finished %s on smd_pkt_dev id:%d\n", |
| __func__, smd_pkt_devp->i); |
| |
| return r; |
| } |
| |
| static const struct file_operations smd_pkt_fops = { |
| .owner = THIS_MODULE, |
| .open = smd_pkt_open, |
| .release = smd_pkt_release, |
| .read = smd_pkt_read, |
| .write = smd_pkt_write, |
| .poll = smd_pkt_poll, |
| .unlocked_ioctl = smd_pkt_ioctl, |
| }; |
| |
| static int __init smd_pkt_init(void) |
| { |
| int i; |
| int r; |
| |
| r = alloc_chrdev_region(&smd_pkt_number, |
| 0, |
| NUM_SMD_PKT_PORTS, |
| DEVICE_NAME); |
| if (IS_ERR_VALUE(r)) { |
| pr_err("%s: alloc_chrdev_region() failed ret:%i\n", |
| __func__, r); |
| goto error0; |
| } |
| |
| smd_pkt_classp = class_create(THIS_MODULE, DEVICE_NAME); |
| if (IS_ERR(smd_pkt_classp)) { |
| pr_err("%s: class_create() failed ENOMEM\n", __func__); |
| r = -ENOMEM; |
| goto error1; |
| } |
| |
| for (i = 0; i < NUM_SMD_PKT_PORTS; ++i) { |
| smd_pkt_devp[i] = kzalloc(sizeof(struct smd_pkt_dev), |
| GFP_KERNEL); |
| if (IS_ERR(smd_pkt_devp[i])) { |
| pr_err("%s: kzalloc() failed for smd_pkt_dev id:%d\n", |
| __func__, i); |
| r = -ENOMEM; |
| goto error2; |
| } |
| |
| smd_pkt_devp[i]->i = i; |
| |
| init_waitqueue_head(&smd_pkt_devp[i]->ch_read_wait_queue); |
| init_waitqueue_head(&smd_pkt_devp[i]->ch_write_wait_queue); |
| smd_pkt_devp[i]->is_open = 0; |
| smd_pkt_devp[i]->poll_mode = 0; |
| smd_pkt_devp[i]->wakelock_locked = 0; |
| init_waitqueue_head(&smd_pkt_devp[i]->ch_opened_wait_queue); |
| |
| spin_lock_init(&smd_pkt_devp[i]->pa_spinlock); |
| mutex_init(&smd_pkt_devp[i]->ch_lock); |
| mutex_init(&smd_pkt_devp[i]->rx_lock); |
| mutex_init(&smd_pkt_devp[i]->tx_lock); |
| |
| cdev_init(&smd_pkt_devp[i]->cdev, &smd_pkt_fops); |
| smd_pkt_devp[i]->cdev.owner = THIS_MODULE; |
| |
| r = cdev_add(&smd_pkt_devp[i]->cdev, |
| (smd_pkt_number + i), |
| 1); |
| |
| if (IS_ERR_VALUE(r)) { |
| pr_err("%s: cdev_add() failed for smd_pkt_dev id:%d" |
| " ret:%i\n", __func__, i, r); |
| kfree(smd_pkt_devp[i]); |
| goto error2; |
| } |
| |
| smd_pkt_devp[i]->devicep = |
| device_create(smd_pkt_classp, |
| NULL, |
| (smd_pkt_number + i), |
| NULL, |
| smd_pkt_dev_name[i]); |
| |
| if (IS_ERR(smd_pkt_devp[i]->devicep)) { |
| pr_err("%s: device_create() failed for smd_pkt_dev" |
| " id:%d\n", __func__, i); |
| r = -ENOMEM; |
| cdev_del(&smd_pkt_devp[i]->cdev); |
| kfree(smd_pkt_devp[i]); |
| goto error2; |
| } |
| if (device_create_file(smd_pkt_devp[i]->devicep, |
| &dev_attr_open_timeout)) |
| pr_err("%s: unable to create device attr for" |
| " smd_pkt_dev id:%d\n", __func__, i); |
| } |
| |
| INIT_DELAYED_WORK(&loopback_work, loopback_probe_worker); |
| |
| D_STATUS("SMD Packet Port Driver Initialized.\n"); |
| return 0; |
| |
| error2: |
| if (i > 0) { |
| while (--i >= 0) { |
| cdev_del(&smd_pkt_devp[i]->cdev); |
| kfree(smd_pkt_devp[i]); |
| device_destroy(smd_pkt_classp, |
| MKDEV(MAJOR(smd_pkt_number), i)); |
| } |
| } |
| |
| class_destroy(smd_pkt_classp); |
| error1: |
| unregister_chrdev_region(MAJOR(smd_pkt_number), NUM_SMD_PKT_PORTS); |
| error0: |
| return r; |
| } |
| |
| static void __exit smd_pkt_cleanup(void) |
| { |
| int i; |
| |
| for (i = 0; i < NUM_SMD_PKT_PORTS; ++i) { |
| cdev_del(&smd_pkt_devp[i]->cdev); |
| kfree(smd_pkt_devp[i]); |
| device_destroy(smd_pkt_classp, |
| MKDEV(MAJOR(smd_pkt_number), i)); |
| } |
| |
| class_destroy(smd_pkt_classp); |
| |
| unregister_chrdev_region(MAJOR(smd_pkt_number), NUM_SMD_PKT_PORTS); |
| } |
| |
| module_init(smd_pkt_init); |
| module_exit(smd_pkt_cleanup); |
| |
| MODULE_DESCRIPTION("MSM Shared Memory Packet Port"); |
| MODULE_LICENSE("GPL v2"); |