| /* |
| * |
| * sep_driver.c - Security Processor Driver main group of functions |
| * |
| * Copyright(c) 2009 Intel Corporation. All rights reserved. |
| * Copyright(c) 2009 Discretix. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the Free |
| * Software Foundation; either version 2 of the License, or (at your option) |
| * any later version. |
| * |
| * This program is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License along with |
| * this program; if not, write to the Free Software Foundation, Inc., 59 |
| * Temple Place - Suite 330, Boston, MA 02111-1307, USA. |
| * |
| * CONTACTS: |
| * |
| * Mark Allyn mark.a.allyn@intel.com |
| * |
| * CHANGES: |
| * |
| * 2009.06.26 Initial publish |
| * |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/fs.h> |
| #include <linux/cdev.h> |
| #include <linux/kdev_t.h> |
| #include <linux/mutex.h> |
| #include <linux/sched.h> |
| #include <linux/mm.h> |
| #include <linux/poll.h> |
| #include <linux/wait.h> |
| #include <linux/sched.h> |
| #include <linux/pci.h> |
| #include <linux/firmware.h> |
| #include <asm/ioctl.h> |
| #include <linux/ioport.h> |
| #include <asm/io.h> |
| #include <linux/interrupt.h> |
| #include <linux/pagemap.h> |
| #include <asm/cacheflush.h> |
| #include "sep_driver_hw_defs.h" |
| #include "sep_driver_config.h" |
| #include "sep_driver_api.h" |
| #include "sep_dev.h" |
| |
| #if SEP_DRIVER_ARM_DEBUG_MODE |
| |
| #define CRYS_SEP_ROM_length 0x4000 |
| #define CRYS_SEP_ROM_start_address 0x8000C000UL |
| #define CRYS_SEP_ROM_start_address_offset 0xC000UL |
| #define SEP_ROM_BANK_register 0x80008420UL |
| #define SEP_ROM_BANK_register_offset 0x8420UL |
| #define SEP_RAR_IO_MEM_REGION_START_ADDRESS 0x82000000 |
| |
| /* |
| * THESE 2 definitions are specific to the board - must be |
| * defined during integration |
| */ |
| #define SEP_RAR_IO_MEM_REGION_START_ADDRESS 0xFF0D0000 |
| |
| /* 2M size */ |
| |
| static void sep_load_rom_code(struct sep_device *sep) |
| { |
| /* Index variables */ |
| unsigned long i, k, j; |
| u32 reg; |
| u32 error; |
| u32 warning; |
| |
| /* Loading ROM from SEP_ROM_image.h file */ |
| k = sizeof(CRYS_SEP_ROM); |
| |
| edbg("SEP Driver: DX_CC_TST_SepRomLoader start\n"); |
| |
| edbg("SEP Driver: k is %lu\n", k); |
| edbg("SEP Driver: sep->reg_addr is %p\n", sep->reg_addr); |
| edbg("SEP Driver: CRYS_SEP_ROM_start_address_offset is %p\n", CRYS_SEP_ROM_start_address_offset); |
| |
| for (i = 0; i < 4; i++) { |
| /* write bank */ |
| sep_write_reg(sep, SEP_ROM_BANK_register_offset, i); |
| |
| for (j = 0; j < CRYS_SEP_ROM_length / 4; j++) { |
| sep_write_reg(sep, CRYS_SEP_ROM_start_address_offset + 4 * j, CRYS_SEP_ROM[i * 0x1000 + j]); |
| |
| k = k - 4; |
| |
| if (k == 0) { |
| j = CRYS_SEP_ROM_length; |
| i = 4; |
| } |
| } |
| } |
| |
| /* reset the SEP */ |
| sep_write_reg(sep, HW_HOST_SEP_SW_RST_REG_ADDR, 0x1); |
| |
| /* poll for SEP ROM boot finish */ |
| do |
| reg = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR3_REG_ADDR); |
| while (!reg); |
| |
| edbg("SEP Driver: ROM polling ended\n"); |
| |
| switch (reg) { |
| case 0x1: |
| /* fatal error - read erro status from GPRO */ |
| error = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR0_REG_ADDR); |
| edbg("SEP Driver: ROM polling case 1\n"); |
| break; |
| case 0x4: |
| /* Cold boot ended successfully */ |
| case 0x8: |
| /* Warmboot ended successfully */ |
| case 0x10: |
| /* ColdWarm boot ended successfully */ |
| error = 0; |
| case 0x2: |
| /* Boot First Phase ended */ |
| warning = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR0_REG_ADDR); |
| case 0x20: |
| edbg("SEP Driver: ROM polling case %d\n", reg); |
| break; |
| } |
| |
| } |
| |
| #else |
| static void sep_load_rom_code(struct sep_device *sep) { } |
| #endif /* SEP_DRIVER_ARM_DEBUG_MODE */ |
| |
| |
| |
| /*---------------------------------------- |
| DEFINES |
| -----------------------------------------*/ |
| |
| #define BASE_ADDRESS_FOR_SYSTEM 0xfffc0000 |
| #define SEP_RAR_IO_MEM_REGION_SIZE 0x40000 |
| |
| /*-------------------------------------------- |
| GLOBAL variables |
| --------------------------------------------*/ |
| |
| /* debug messages level */ |
| static int debug; |
| module_param(debug, int , 0); |
| MODULE_PARM_DESC(debug, "Flag to enable SEP debug messages"); |
| |
| /* Keep this a single static object for now to keep the conversion easy */ |
| |
| static struct sep_device sep_instance; |
| static struct sep_device *sep_dev = &sep_instance; |
| |
| /* |
| mutex for the access to the internals of the sep driver |
| */ |
| static DEFINE_MUTEX(sep_mutex); |
| |
| |
| /* wait queue head (event) of the driver */ |
| static DECLARE_WAIT_QUEUE_HEAD(sep_event); |
| |
| /** |
| * sep_load_firmware - copy firmware cache/resident |
| * @sep: device we are loading |
| * |
| * This functions copies the cache and resident from their source |
| * location into destination shared memory. |
| */ |
| |
| static int sep_load_firmware(struct sep_device *sep) |
| { |
| const struct firmware *fw; |
| char *cache_name = "sep/cache.image.bin"; |
| char *res_name = "sep/resident.image.bin"; |
| int error; |
| |
| edbg("SEP Driver:rar_virtual is %p\n", sep->rar_addr); |
| edbg("SEP Driver:rar_bus is %08llx\n", (unsigned long long)sep->rar_bus); |
| |
| /* load cache */ |
| error = request_firmware(&fw, cache_name, &sep->pdev->dev); |
| if (error) { |
| edbg("SEP Driver:cant request cache fw\n"); |
| return error; |
| } |
| edbg("SEP Driver:cache %08Zx@%p\n", fw->size, (void *) fw->data); |
| |
| memcpy(sep->rar_addr, (void *)fw->data, fw->size); |
| sep->cache_size = fw->size; |
| release_firmware(fw); |
| |
| sep->resident_bus = sep->rar_bus + sep->cache_size; |
| sep->resident_addr = sep->rar_addr + sep->cache_size; |
| |
| /* load resident */ |
| error = request_firmware(&fw, res_name, &sep->pdev->dev); |
| if (error) { |
| edbg("SEP Driver:cant request res fw\n"); |
| return error; |
| } |
| edbg("sep: res %08Zx@%p\n", fw->size, (void *)fw->data); |
| |
| memcpy(sep->resident_addr, (void *) fw->data, fw->size); |
| sep->resident_size = fw->size; |
| release_firmware(fw); |
| |
| edbg("sep: resident v %p b %08llx cache v %p b %08llx\n", |
| sep->resident_addr, (unsigned long long)sep->resident_bus, |
| sep->rar_addr, (unsigned long long)sep->rar_bus); |
| return 0; |
| } |
| |
| MODULE_FIRMWARE("sep/cache.image.bin"); |
| MODULE_FIRMWARE("sep/resident.image.bin"); |
| |
| /** |
| * sep_map_and_alloc_shared_area - allocate shared block |
| * @sep: security processor |
| * @size: size of shared area |
| * |
| * Allocate a shared buffer in host memory that can be used by both the |
| * kernel and also the hardware interface via DMA. |
| */ |
| |
| static int sep_map_and_alloc_shared_area(struct sep_device *sep, |
| unsigned long size) |
| { |
| /* shared_addr = ioremap_nocache(0xda00000,shared_area_size); */ |
| sep->shared_addr = dma_alloc_coherent(&sep->pdev->dev, size, |
| &sep->shared_bus, GFP_KERNEL); |
| |
| if (!sep->shared_addr) { |
| edbg("sep_driver :shared memory dma_alloc_coherent failed\n"); |
| return -ENOMEM; |
| } |
| /* set the bus address of the shared area */ |
| edbg("sep: shared_addr %ld bytes @%p (bus %08llx)\n", |
| size, sep->shared_addr, (unsigned long long)sep->shared_bus); |
| return 0; |
| } |
| |
| /** |
| * sep_unmap_and_free_shared_area - free shared block |
| * @sep: security processor |
| * |
| * Free the shared area allocated to the security processor. The |
| * processor must have finished with this and any final posted |
| * writes cleared before we do so. |
| */ |
| static void sep_unmap_and_free_shared_area(struct sep_device *sep, int size) |
| { |
| dma_free_coherent(&sep->pdev->dev, size, |
| sep->shared_addr, sep->shared_bus); |
| } |
| |
| /** |
| * sep_shared_virt_to_bus - convert bus/virt addresses |
| * |
| * Returns the bus address inside the shared area according |
| * to the virtual address. |
| */ |
| |
| static dma_addr_t sep_shared_virt_to_bus(struct sep_device *sep, |
| void *virt_address) |
| { |
| dma_addr_t pa = sep->shared_bus + (virt_address - sep->shared_addr); |
| edbg("sep: virt to bus b %08llx v %p\n", (unsigned long long) pa, |
| virt_address); |
| return pa; |
| } |
| |
| /** |
| * sep_shared_bus_to_virt - convert bus/virt addresses |
| * |
| * Returns virtual address inside the shared area according |
| * to the bus address. |
| */ |
| |
| static void *sep_shared_bus_to_virt(struct sep_device *sep, |
| dma_addr_t bus_address) |
| { |
| return sep->shared_addr + (bus_address - sep->shared_bus); |
| } |
| |
| |
| /** |
| * sep_try_open - attempt to open a SEP device |
| * @sep: device to attempt to open |
| * |
| * Atomically attempt to get ownership of a SEP device. |
| * Returns 1 if the device was opened, 0 on failure. |
| */ |
| |
| static int sep_try_open(struct sep_device *sep) |
| { |
| if (!test_and_set_bit(0, &sep->in_use)) |
| return 1; |
| return 0; |
| } |
| |
| /** |
| * sep_open - device open method |
| * @inode: inode of sep device |
| * @filp: file handle to sep device |
| * |
| * Open method for the SEP device. Called when userspace opens |
| * the SEP device node. Must also release the memory data pool |
| * allocations. |
| * |
| * Returns zero on success otherwise an error code. |
| */ |
| |
| static int sep_open(struct inode *inode, struct file *filp) |
| { |
| if (sep_dev == NULL) |
| return -ENODEV; |
| |
| /* check the blocking mode */ |
| if (filp->f_flags & O_NDELAY) { |
| if (sep_try_open(sep_dev) == 0) |
| return -EAGAIN; |
| } else |
| if (wait_event_interruptible(sep_event, sep_try_open(sep_dev)) < 0) |
| return -EINTR; |
| |
| /* Bind to the device, we only have one which makes it easy */ |
| filp->private_data = sep_dev; |
| /* release data pool allocations */ |
| sep_dev->data_pool_bytes_allocated = 0; |
| return 0; |
| } |
| |
| |
| /** |
| * sep_release - close a SEP device |
| * @inode: inode of SEP device |
| * @filp: file handle being closed |
| * |
| * Called on the final close of a SEP device. As the open protects against |
| * multiple simultaenous opens that means this method is called when the |
| * final reference to the open handle is dropped. |
| */ |
| |
| static int sep_release(struct inode *inode, struct file *filp) |
| { |
| struct sep_device *sep = filp->private_data; |
| #if 0 /*!SEP_DRIVER_POLLING_MODE */ |
| /* close IMR */ |
| sep_write_reg(sep, HW_HOST_IMR_REG_ADDR, 0x7FFF); |
| /* release IRQ line */ |
| free_irq(SEP_DIRVER_IRQ_NUM, sep); |
| |
| #endif |
| /* Ensure any blocked open progresses */ |
| clear_bit(0, &sep->in_use); |
| wake_up(&sep_event); |
| return 0; |
| } |
| |
| /*--------------------------------------------------------------- |
| map function - this functions maps the message shared area |
| -----------------------------------------------------------------*/ |
| static int sep_mmap(struct file *filp, struct vm_area_struct *vma) |
| { |
| dma_addr_t bus_addr; |
| struct sep_device *sep = filp->private_data; |
| |
| dbg("-------->SEP Driver: mmap start\n"); |
| |
| /* check that the size of the mapped range is as the size of the message |
| shared area */ |
| if ((vma->vm_end - vma->vm_start) > SEP_DRIVER_MMMAP_AREA_SIZE) { |
| edbg("SEP Driver mmap requested size is more than allowed\n"); |
| printk(KERN_WARNING "SEP Driver mmap requested size is more than allowed\n"); |
| printk(KERN_WARNING "SEP Driver vma->vm_end is %08lx\n", vma->vm_end); |
| printk(KERN_WARNING "SEP Driver vma->vm_end is %08lx\n", vma->vm_start); |
| return -EAGAIN; |
| } |
| |
| edbg("SEP Driver:sep->shared_addr is %p\n", sep->shared_addr); |
| |
| /* get bus address */ |
| bus_addr = sep->shared_bus; |
| |
| edbg("SEP Driver: phys_addr is %08llx\n", (unsigned long long)bus_addr); |
| |
| if (remap_pfn_range(vma, vma->vm_start, bus_addr >> PAGE_SHIFT, vma->vm_end - vma->vm_start, vma->vm_page_prot)) { |
| edbg("SEP Driver remap_page_range failed\n"); |
| printk(KERN_WARNING "SEP Driver remap_page_range failed\n"); |
| return -EAGAIN; |
| } |
| |
| dbg("SEP Driver:<-------- mmap end\n"); |
| |
| return 0; |
| } |
| |
| |
| /*----------------------------------------------- |
| poll function |
| *----------------------------------------------*/ |
| static unsigned int sep_poll(struct file *filp, poll_table * wait) |
| { |
| unsigned long count; |
| unsigned int mask = 0; |
| unsigned long retval = 0; /* flow id */ |
| struct sep_device *sep = filp->private_data; |
| |
| dbg("---------->SEP Driver poll: start\n"); |
| |
| |
| #if SEP_DRIVER_POLLING_MODE |
| |
| while (sep->send_ct != (retval & 0x7FFFFFFF)) { |
| retval = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR2_REG_ADDR); |
| |
| for (count = 0; count < 10 * 4; count += 4) |
| edbg("Poll Debug Word %lu of the message is %lu\n", count, *((unsigned long *) (sep->shared_addr + SEP_DRIVER_MESSAGE_SHARED_AREA_SIZE_IN_BYTES + count))); |
| } |
| |
| sep->reply_ct++; |
| #else |
| /* add the event to the polling wait table */ |
| poll_wait(filp, &sep_event, wait); |
| |
| #endif |
| |
| edbg("sep->send_ct is %lu\n", sep->send_ct); |
| edbg("sep->reply_ct is %lu\n", sep->reply_ct); |
| |
| /* check if the data is ready */ |
| if (sep->send_ct == sep->reply_ct) { |
| for (count = 0; count < 12 * 4; count += 4) |
| edbg("Sep Mesg Word %lu of the message is %lu\n", count, *((unsigned long *) (sep->shared_addr + count))); |
| |
| for (count = 0; count < 10 * 4; count += 4) |
| edbg("Debug Data Word %lu of the message is %lu\n", count, *((unsigned long *) (sep->shared_addr + 0x1800 + count))); |
| |
| retval = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR2_REG_ADDR); |
| edbg("retval is %lu\n", retval); |
| /* check if the this is sep reply or request */ |
| if (retval >> 31) { |
| edbg("SEP Driver: sep request in\n"); |
| /* request */ |
| mask |= POLLOUT | POLLWRNORM; |
| } else { |
| edbg("SEP Driver: sep reply in\n"); |
| mask |= POLLIN | POLLRDNORM; |
| } |
| } |
| dbg("SEP Driver:<-------- poll exit\n"); |
| return mask; |
| } |
| |
| /** |
| * sep_time_address - address in SEP memory of time |
| * @sep: SEP device we want the address from |
| * |
| * Return the address of the two dwords in memory used for time |
| * setting. |
| */ |
| |
| static u32 *sep_time_address(struct sep_device *sep) |
| { |
| return sep->shared_addr + SEP_DRIVER_SYSTEM_TIME_MEMORY_OFFSET_IN_BYTES; |
| } |
| |
| /** |
| * sep_set_time - set the SEP time |
| * @sep: the SEP we are setting the time for |
| * |
| * Calculates time and sets it at the predefined address. |
| * Called with the sep mutex held. |
| */ |
| static unsigned long sep_set_time(struct sep_device *sep) |
| { |
| struct timeval time; |
| u32 *time_addr; /* address of time as seen by the kernel */ |
| |
| |
| dbg("sep:sep_set_time start\n"); |
| |
| do_gettimeofday(&time); |
| |
| /* set value in the SYSTEM MEMORY offset */ |
| time_addr = sep_time_address(sep); |
| |
| time_addr[0] = SEP_TIME_VAL_TOKEN; |
| time_addr[1] = time.tv_sec; |
| |
| edbg("SEP Driver:time.tv_sec is %lu\n", time.tv_sec); |
| edbg("SEP Driver:time_addr is %p\n", time_addr); |
| edbg("SEP Driver:sep->shared_addr is %p\n", sep->shared_addr); |
| |
| return time.tv_sec; |
| } |
| |
| /** |
| * sep_dump_message - dump the message that is pending |
| * @sep: sep device |
| * |
| * Dump out the message pending in the shared message area |
| */ |
| |
| static void sep_dump_message(struct sep_device *sep) |
| { |
| int count; |
| for (count = 0; count < 12 * 4; count += 4) |
| edbg("Word %d of the message is %u\n", count, *((u32 *) (sep->shared_addr + count))); |
| } |
| |
| /** |
| * sep_send_command_handler - kick off a command |
| * @sep: sep being signalled |
| * |
| * This function raises interrupt to SEP that signals that is has a new |
| * command from the host |
| */ |
| |
| static void sep_send_command_handler(struct sep_device *sep) |
| { |
| dbg("sep:sep_send_command_handler start\n"); |
| |
| mutex_lock(&sep_mutex); |
| sep_set_time(sep); |
| |
| /* FIXME: flush cache */ |
| flush_cache_all(); |
| |
| sep_dump_message(sep); |
| /* update counter */ |
| sep->send_ct++; |
| /* send interrupt to SEP */ |
| sep_write_reg(sep, HW_HOST_HOST_SEP_GPR0_REG_ADDR, 0x2); |
| dbg("SEP Driver:<-------- sep_send_command_handler end\n"); |
| mutex_unlock(&sep_mutex); |
| return; |
| } |
| |
| /** |
| * sep_send_reply_command_handler - kick off a command reply |
| * @sep: sep being signalled |
| * |
| * This function raises interrupt to SEP that signals that is has a new |
| * command from the host |
| */ |
| |
| static void sep_send_reply_command_handler(struct sep_device *sep) |
| { |
| dbg("sep:sep_send_reply_command_handler start\n"); |
| |
| /* flash cache */ |
| flush_cache_all(); |
| |
| sep_dump_message(sep); |
| |
| mutex_lock(&sep_mutex); |
| sep->send_ct++; /* update counter */ |
| /* send the interrupt to SEP */ |
| sep_write_reg(sep, HW_HOST_HOST_SEP_GPR2_REG_ADDR, sep->send_ct); |
| /* update both counters */ |
| sep->send_ct++; |
| sep->reply_ct++; |
| mutex_unlock(&sep_mutex); |
| dbg("sep: sep_send_reply_command_handler end\n"); |
| } |
| |
| /* |
| This function handles the allocate data pool memory request |
| This function returns calculates the bus address of the |
| allocated memory, and the offset of this area from the mapped address. |
| Therefore, the FVOs in user space can calculate the exact virtual |
| address of this allocated memory |
| */ |
| static int sep_allocate_data_pool_memory_handler(struct sep_device *sep, |
| unsigned long arg) |
| { |
| int error; |
| struct sep_driver_alloc_t command_args; |
| |
| dbg("SEP Driver:--------> sep_allocate_data_pool_memory_handler start\n"); |
| |
| error = copy_from_user(&command_args, (void *) arg, sizeof(struct sep_driver_alloc_t)); |
| if (error) |
| goto end_function; |
| |
| /* allocate memory */ |
| if ((sep->data_pool_bytes_allocated + command_args.num_bytes) > SEP_DRIVER_DATA_POOL_SHARED_AREA_SIZE_IN_BYTES) { |
| error = -ENOMEM; |
| goto end_function; |
| } |
| |
| /* set the virtual and bus address */ |
| command_args.offset = SEP_DRIVER_DATA_POOL_AREA_OFFSET_IN_BYTES + sep->data_pool_bytes_allocated; |
| command_args.phys_address = sep->shared_bus + SEP_DRIVER_DATA_POOL_AREA_OFFSET_IN_BYTES + sep->data_pool_bytes_allocated; |
| |
| /* write the memory back to the user space */ |
| error = copy_to_user((void *) arg, (void *) &command_args, sizeof(struct sep_driver_alloc_t)); |
| if (error) |
| goto end_function; |
| |
| /* set the allocation */ |
| sep->data_pool_bytes_allocated += command_args.num_bytes; |
| |
| end_function: |
| dbg("SEP Driver:<-------- sep_allocate_data_pool_memory_handler end\n"); |
| return error; |
| } |
| |
| /* |
| This function handles write into allocated data pool command |
| */ |
| static int sep_write_into_data_pool_handler(struct sep_device *sep, unsigned long arg) |
| { |
| int error; |
| void *virt_address; |
| unsigned long va; |
| unsigned long app_in_address; |
| unsigned long num_bytes; |
| void *data_pool_area_addr; |
| |
| dbg("SEP Driver:--------> sep_write_into_data_pool_handler start\n"); |
| |
| /* get the application address */ |
| error = get_user(app_in_address, &(((struct sep_driver_write_t *) arg)->app_address)); |
| if (error) |
| goto end_function; |
| |
| /* get the virtual kernel address address */ |
| error = get_user(va, &(((struct sep_driver_write_t *) arg)->datapool_address)); |
| if (error) |
| goto end_function; |
| virt_address = (void *)va; |
| |
| /* get the number of bytes */ |
| error = get_user(num_bytes, &(((struct sep_driver_write_t *) arg)->num_bytes)); |
| if (error) |
| goto end_function; |
| |
| /* calculate the start of the data pool */ |
| data_pool_area_addr = sep->shared_addr + SEP_DRIVER_DATA_POOL_AREA_OFFSET_IN_BYTES; |
| |
| |
| /* check that the range of the virtual kernel address is correct */ |
| if (virt_address < data_pool_area_addr || virt_address > (data_pool_area_addr + SEP_DRIVER_DATA_POOL_SHARED_AREA_SIZE_IN_BYTES)) { |
| error = -EINVAL; |
| goto end_function; |
| } |
| /* copy the application data */ |
| error = copy_from_user(virt_address, (void *) app_in_address, num_bytes); |
| end_function: |
| dbg("SEP Driver:<-------- sep_write_into_data_pool_handler end\n"); |
| return error; |
| } |
| |
| /* |
| this function handles the read from data pool command |
| */ |
| static int sep_read_from_data_pool_handler(struct sep_device *sep, unsigned long arg) |
| { |
| int error; |
| /* virtual address of dest application buffer */ |
| unsigned long app_out_address; |
| /* virtual address of the data pool */ |
| unsigned long va; |
| void *virt_address; |
| unsigned long num_bytes; |
| void *data_pool_area_addr; |
| |
| dbg("SEP Driver:--------> sep_read_from_data_pool_handler start\n"); |
| |
| /* get the application address */ |
| error = get_user(app_out_address, &(((struct sep_driver_write_t *) arg)->app_address)); |
| if (error) |
| goto end_function; |
| |
| /* get the virtual kernel address address */ |
| error = get_user(va, &(((struct sep_driver_write_t *) arg)->datapool_address)); |
| if (error) |
| goto end_function; |
| virt_address = (void *)va; |
| |
| /* get the number of bytes */ |
| error = get_user(num_bytes, &(((struct sep_driver_write_t *) arg)->num_bytes)); |
| if (error) |
| goto end_function; |
| |
| /* calculate the start of the data pool */ |
| data_pool_area_addr = sep->shared_addr + SEP_DRIVER_DATA_POOL_AREA_OFFSET_IN_BYTES; |
| |
| /* FIXME: These are incomplete all over the driver: what about + len |
| and when doing that also overflows */ |
| /* check that the range of the virtual kernel address is correct */ |
| if (virt_address < data_pool_area_addr || virt_address > data_pool_area_addr + SEP_DRIVER_DATA_POOL_SHARED_AREA_SIZE_IN_BYTES) { |
| error = -EINVAL; |
| goto end_function; |
| } |
| |
| /* copy the application data */ |
| error = copy_to_user((void *) app_out_address, virt_address, num_bytes); |
| end_function: |
| dbg("SEP Driver:<-------- sep_read_from_data_pool_handler end\n"); |
| return error; |
| } |
| |
| /* |
| This function releases all the application virtual buffer physical pages, |
| that were previously locked |
| */ |
| static int sep_free_dma_pages(struct page **page_array_ptr, unsigned long num_pages, unsigned long dirtyFlag) |
| { |
| unsigned long count; |
| |
| if (dirtyFlag) { |
| for (count = 0; count < num_pages; count++) { |
| /* the out array was written, therefore the data was changed */ |
| if (!PageReserved(page_array_ptr[count])) |
| SetPageDirty(page_array_ptr[count]); |
| page_cache_release(page_array_ptr[count]); |
| } |
| } else { |
| /* free in pages - the data was only read, therefore no update was done |
| on those pages */ |
| for (count = 0; count < num_pages; count++) |
| page_cache_release(page_array_ptr[count]); |
| } |
| |
| if (page_array_ptr) |
| /* free the array */ |
| kfree(page_array_ptr); |
| |
| return 0; |
| } |
| |
| /* |
| This function locks all the physical pages of the kernel virtual buffer |
| and construct a basic lli array, where each entry holds the physical |
| page address and the size that application data holds in this physical pages |
| */ |
| static int sep_lock_kernel_pages(struct sep_device *sep, |
| unsigned long kernel_virt_addr, |
| unsigned long data_size, |
| unsigned long *num_pages_ptr, |
| struct sep_lli_entry_t **lli_array_ptr, |
| struct page ***page_array_ptr) |
| { |
| int error = 0; |
| /* the the page of the end address of the user space buffer */ |
| unsigned long end_page; |
| /* the page of the start address of the user space buffer */ |
| unsigned long start_page; |
| /* the range in pages */ |
| unsigned long num_pages; |
| struct sep_lli_entry_t *lli_array; |
| /* next kernel address to map */ |
| unsigned long next_kernel_address; |
| unsigned long count; |
| |
| dbg("SEP Driver:--------> sep_lock_kernel_pages start\n"); |
| |
| /* set start and end pages and num pages */ |
| end_page = (kernel_virt_addr + data_size - 1) >> PAGE_SHIFT; |
| start_page = kernel_virt_addr >> PAGE_SHIFT; |
| num_pages = end_page - start_page + 1; |
| |
| edbg("SEP Driver: kernel_virt_addr is %08lx\n", kernel_virt_addr); |
| edbg("SEP Driver: data_size is %lu\n", data_size); |
| edbg("SEP Driver: start_page is %lx\n", start_page); |
| edbg("SEP Driver: end_page is %lx\n", end_page); |
| edbg("SEP Driver: num_pages is %lu\n", num_pages); |
| |
| lli_array = kmalloc(sizeof(struct sep_lli_entry_t) * num_pages, GFP_ATOMIC); |
| if (!lli_array) { |
| edbg("SEP Driver: kmalloc for lli_array failed\n"); |
| error = -ENOMEM; |
| goto end_function; |
| } |
| |
| /* set the start address of the first page - app data may start not at |
| the beginning of the page */ |
| lli_array[0].physical_address = (unsigned long) virt_to_phys((unsigned long *) kernel_virt_addr); |
| |
| /* check that not all the data is in the first page only */ |
| if ((PAGE_SIZE - (kernel_virt_addr & (~PAGE_MASK))) >= data_size) |
| lli_array[0].block_size = data_size; |
| else |
| lli_array[0].block_size = PAGE_SIZE - (kernel_virt_addr & (~PAGE_MASK)); |
| |
| /* debug print */ |
| dbg("lli_array[0].physical_address is %08lx, lli_array[0].block_size is %lu\n", lli_array[0].physical_address, lli_array[0].block_size); |
| |
| /* advance the address to the start of the next page */ |
| next_kernel_address = (kernel_virt_addr & PAGE_MASK) + PAGE_SIZE; |
| |
| /* go from the second page to the prev before last */ |
| for (count = 1; count < (num_pages - 1); count++) { |
| lli_array[count].physical_address = (unsigned long) virt_to_phys((unsigned long *) next_kernel_address); |
| lli_array[count].block_size = PAGE_SIZE; |
| |
| edbg("lli_array[%lu].physical_address is %08lx, lli_array[%lu].block_size is %lu\n", count, lli_array[count].physical_address, count, lli_array[count].block_size); |
| next_kernel_address += PAGE_SIZE; |
| } |
| |
| /* if more then 1 pages locked - then update for the last page size needed */ |
| if (num_pages > 1) { |
| /* update the address of the last page */ |
| lli_array[count].physical_address = (unsigned long) virt_to_phys((unsigned long *) next_kernel_address); |
| |
| /* set the size of the last page */ |
| lli_array[count].block_size = (kernel_virt_addr + data_size) & (~PAGE_MASK); |
| |
| if (lli_array[count].block_size == 0) { |
| dbg("app_virt_addr is %08lx\n", kernel_virt_addr); |
| dbg("data_size is %lu\n", data_size); |
| while (1); |
| } |
| |
| edbg("lli_array[%lu].physical_address is %08lx, lli_array[%lu].block_size is %lu\n", count, lli_array[count].physical_address, count, lli_array[count].block_size); |
| } |
| /* set output params */ |
| *lli_array_ptr = lli_array; |
| *num_pages_ptr = num_pages; |
| *page_array_ptr = 0; |
| end_function: |
| dbg("SEP Driver:<-------- sep_lock_kernel_pages end\n"); |
| return 0; |
| } |
| |
| /* |
| This function locks all the physical pages of the application virtual buffer |
| and construct a basic lli array, where each entry holds the physical page |
| address and the size that application data holds in this physical pages |
| */ |
| static int sep_lock_user_pages(struct sep_device *sep, |
| unsigned long app_virt_addr, |
| unsigned long data_size, |
| unsigned long *num_pages_ptr, |
| struct sep_lli_entry_t **lli_array_ptr, |
| struct page ***page_array_ptr) |
| { |
| int error = 0; |
| /* the the page of the end address of the user space buffer */ |
| unsigned long end_page; |
| /* the page of the start address of the user space buffer */ |
| unsigned long start_page; |
| /* the range in pages */ |
| unsigned long num_pages; |
| struct page **page_array; |
| struct sep_lli_entry_t *lli_array; |
| unsigned long count; |
| int result; |
| |
| dbg("SEP Driver:--------> sep_lock_user_pages start\n"); |
| |
| /* set start and end pages and num pages */ |
| end_page = (app_virt_addr + data_size - 1) >> PAGE_SHIFT; |
| start_page = app_virt_addr >> PAGE_SHIFT; |
| num_pages = end_page - start_page + 1; |
| |
| edbg("SEP Driver: app_virt_addr is %08lx\n", app_virt_addr); |
| edbg("SEP Driver: data_size is %lu\n", data_size); |
| edbg("SEP Driver: start_page is %lu\n", start_page); |
| edbg("SEP Driver: end_page is %lu\n", end_page); |
| edbg("SEP Driver: num_pages is %lu\n", num_pages); |
| |
| /* allocate array of pages structure pointers */ |
| page_array = kmalloc(sizeof(struct page *) * num_pages, GFP_ATOMIC); |
| if (!page_array) { |
| edbg("SEP Driver: kmalloc for page_array failed\n"); |
| |
| error = -ENOMEM; |
| goto end_function; |
| } |
| |
| lli_array = kmalloc(sizeof(struct sep_lli_entry_t) * num_pages, GFP_ATOMIC); |
| if (!lli_array) { |
| edbg("SEP Driver: kmalloc for lli_array failed\n"); |
| |
| error = -ENOMEM; |
| goto end_function_with_error1; |
| } |
| |
| /* convert the application virtual address into a set of physical */ |
| down_read(¤t->mm->mmap_sem); |
| result = get_user_pages(current, current->mm, app_virt_addr, num_pages, 1, 0, page_array, 0); |
| up_read(¤t->mm->mmap_sem); |
| |
| /* check the number of pages locked - if not all then exit with error */ |
| if (result != num_pages) { |
| dbg("SEP Driver: not all pages locked by get_user_pages\n"); |
| |
| error = -ENOMEM; |
| goto end_function_with_error2; |
| } |
| |
| /* flush the cache */ |
| for (count = 0; count < num_pages; count++) |
| flush_dcache_page(page_array[count]); |
| |
| /* set the start address of the first page - app data may start not at |
| the beginning of the page */ |
| lli_array[0].physical_address = ((unsigned long) page_to_phys(page_array[0])) + (app_virt_addr & (~PAGE_MASK)); |
| |
| /* check that not all the data is in the first page only */ |
| if ((PAGE_SIZE - (app_virt_addr & (~PAGE_MASK))) >= data_size) |
| lli_array[0].block_size = data_size; |
| else |
| lli_array[0].block_size = PAGE_SIZE - (app_virt_addr & (~PAGE_MASK)); |
| |
| /* debug print */ |
| dbg("lli_array[0].physical_address is %08lx, lli_array[0].block_size is %lu\n", lli_array[0].physical_address, lli_array[0].block_size); |
| |
| /* go from the second page to the prev before last */ |
| for (count = 1; count < (num_pages - 1); count++) { |
| lli_array[count].physical_address = (unsigned long) page_to_phys(page_array[count]); |
| lli_array[count].block_size = PAGE_SIZE; |
| |
| edbg("lli_array[%lu].physical_address is %08lx, lli_array[%lu].block_size is %lu\n", count, lli_array[count].physical_address, count, lli_array[count].block_size); |
| } |
| |
| /* if more then 1 pages locked - then update for the last page size needed */ |
| if (num_pages > 1) { |
| /* update the address of the last page */ |
| lli_array[count].physical_address = (unsigned long) page_to_phys(page_array[count]); |
| |
| /* set the size of the last page */ |
| lli_array[count].block_size = (app_virt_addr + data_size) & (~PAGE_MASK); |
| |
| if (lli_array[count].block_size == 0) { |
| dbg("app_virt_addr is %08lx\n", app_virt_addr); |
| dbg("data_size is %lu\n", data_size); |
| while (1); |
| } |
| edbg("lli_array[%lu].physical_address is %08lx, lli_array[%lu].block_size is %lu\n", |
| count, lli_array[count].physical_address, |
| count, lli_array[count].block_size); |
| } |
| |
| /* set output params */ |
| *lli_array_ptr = lli_array; |
| *num_pages_ptr = num_pages; |
| *page_array_ptr = page_array; |
| goto end_function; |
| |
| end_function_with_error2: |
| /* release the cache */ |
| for (count = 0; count < num_pages; count++) |
| page_cache_release(page_array[count]); |
| kfree(lli_array); |
| end_function_with_error1: |
| kfree(page_array); |
| end_function: |
| dbg("SEP Driver:<-------- sep_lock_user_pages end\n"); |
| return 0; |
| } |
| |
| |
| /* |
| this function calculates the size of data that can be inserted into the lli |
| table from this array the condition is that either the table is full |
| (all etnries are entered), or there are no more entries in the lli array |
| */ |
| static unsigned long sep_calculate_lli_table_max_size(struct sep_lli_entry_t *lli_in_array_ptr, unsigned long num_array_entries) |
| { |
| unsigned long table_data_size = 0; |
| unsigned long counter; |
| |
| /* calculate the data in the out lli table if till we fill the whole |
| table or till the data has ended */ |
| for (counter = 0; (counter < (SEP_DRIVER_ENTRIES_PER_TABLE_IN_SEP - 1)) && (counter < num_array_entries); counter++) |
| table_data_size += lli_in_array_ptr[counter].block_size; |
| return table_data_size; |
| } |
| |
| /* |
| this functions builds ont lli table from the lli_array according to |
| the given size of data |
| */ |
| static void sep_build_lli_table(struct sep_lli_entry_t *lli_array_ptr, struct sep_lli_entry_t *lli_table_ptr, unsigned long *num_processed_entries_ptr, unsigned long *num_table_entries_ptr, unsigned long table_data_size) |
| { |
| unsigned long curr_table_data_size; |
| /* counter of lli array entry */ |
| unsigned long array_counter; |
| |
| dbg("SEP Driver:--------> sep_build_lli_table start\n"); |
| |
| /* init currrent table data size and lli array entry counter */ |
| curr_table_data_size = 0; |
| array_counter = 0; |
| *num_table_entries_ptr = 1; |
| |
| edbg("SEP Driver:table_data_size is %lu\n", table_data_size); |
| |
| /* fill the table till table size reaches the needed amount */ |
| while (curr_table_data_size < table_data_size) { |
| /* update the number of entries in table */ |
| (*num_table_entries_ptr)++; |
| |
| lli_table_ptr->physical_address = lli_array_ptr[array_counter].physical_address; |
| lli_table_ptr->block_size = lli_array_ptr[array_counter].block_size; |
| curr_table_data_size += lli_table_ptr->block_size; |
| |
| edbg("SEP Driver:lli_table_ptr is %08lx\n", (unsigned long) lli_table_ptr); |
| edbg("SEP Driver:lli_table_ptr->physical_address is %08lx\n", lli_table_ptr->physical_address); |
| edbg("SEP Driver:lli_table_ptr->block_size is %lu\n", lli_table_ptr->block_size); |
| |
| /* check for overflow of the table data */ |
| if (curr_table_data_size > table_data_size) { |
| edbg("SEP Driver:curr_table_data_size > table_data_size\n"); |
| |
| /* update the size of block in the table */ |
| lli_table_ptr->block_size -= (curr_table_data_size - table_data_size); |
| |
| /* update the physical address in the lli array */ |
| lli_array_ptr[array_counter].physical_address += lli_table_ptr->block_size; |
| |
| /* update the block size left in the lli array */ |
| lli_array_ptr[array_counter].block_size = (curr_table_data_size - table_data_size); |
| } else |
| /* advance to the next entry in the lli_array */ |
| array_counter++; |
| |
| edbg("SEP Driver:lli_table_ptr->physical_address is %08lx\n", lli_table_ptr->physical_address); |
| edbg("SEP Driver:lli_table_ptr->block_size is %lu\n", lli_table_ptr->block_size); |
| |
| /* move to the next entry in table */ |
| lli_table_ptr++; |
| } |
| |
| /* set the info entry to default */ |
| lli_table_ptr->physical_address = 0xffffffff; |
| lli_table_ptr->block_size = 0; |
| |
| edbg("SEP Driver:lli_table_ptr is %08lx\n", (unsigned long) lli_table_ptr); |
| edbg("SEP Driver:lli_table_ptr->physical_address is %08lx\n", lli_table_ptr->physical_address); |
| edbg("SEP Driver:lli_table_ptr->block_size is %lu\n", lli_table_ptr->block_size); |
| |
| /* set the output parameter */ |
| *num_processed_entries_ptr += array_counter; |
| |
| edbg("SEP Driver:*num_processed_entries_ptr is %lu\n", *num_processed_entries_ptr); |
| dbg("SEP Driver:<-------- sep_build_lli_table end\n"); |
| return; |
| } |
| |
| /* |
| this function goes over the list of the print created tables and |
| prints all the data |
| */ |
| static void sep_debug_print_lli_tables(struct sep_device *sep, struct sep_lli_entry_t *lli_table_ptr, unsigned long num_table_entries, unsigned long table_data_size) |
| { |
| unsigned long table_count; |
| unsigned long entries_count; |
| |
| dbg("SEP Driver:--------> sep_debug_print_lli_tables start\n"); |
| |
| table_count = 1; |
| while ((unsigned long) lli_table_ptr != 0xffffffff) { |
| edbg("SEP Driver: lli table %08lx, table_data_size is %lu\n", table_count, table_data_size); |
| edbg("SEP Driver: num_table_entries is %lu\n", num_table_entries); |
| |
| /* print entries of the table (without info entry) */ |
| for (entries_count = 0; entries_count < num_table_entries; entries_count++, lli_table_ptr++) { |
| edbg("SEP Driver:lli_table_ptr address is %08lx\n", (unsigned long) lli_table_ptr); |
| edbg("SEP Driver:phys address is %08lx block size is %lu\n", lli_table_ptr->physical_address, lli_table_ptr->block_size); |
| } |
| |
| /* point to the info entry */ |
| lli_table_ptr--; |
| |
| edbg("SEP Driver:phys lli_table_ptr->block_size is %lu\n", lli_table_ptr->block_size); |
| edbg("SEP Driver:phys lli_table_ptr->physical_address is %08lx\n", lli_table_ptr->physical_address); |
| |
| |
| table_data_size = lli_table_ptr->block_size & 0xffffff; |
| num_table_entries = (lli_table_ptr->block_size >> 24) & 0xff; |
| lli_table_ptr = (struct sep_lli_entry_t *) |
| (lli_table_ptr->physical_address); |
| |
| edbg("SEP Driver:phys table_data_size is %lu num_table_entries is %lu lli_table_ptr is%lu\n", table_data_size, num_table_entries, (unsigned long) lli_table_ptr); |
| |
| if ((unsigned long) lli_table_ptr != 0xffffffff) |
| lli_table_ptr = (struct sep_lli_entry_t *) sep_shared_bus_to_virt(sep, (unsigned long) lli_table_ptr); |
| |
| table_count++; |
| } |
| dbg("SEP Driver:<-------- sep_debug_print_lli_tables end\n"); |
| } |
| |
| |
| /* |
| This function prepares only input DMA table for synhronic symmetric |
| operations (HASH) |
| */ |
| static int sep_prepare_input_dma_table(struct sep_device *sep, |
| unsigned long app_virt_addr, |
| unsigned long data_size, |
| unsigned long block_size, |
| unsigned long *lli_table_ptr, |
| unsigned long *num_entries_ptr, |
| unsigned long *table_data_size_ptr, |
| bool isKernelVirtualAddress) |
| { |
| /* pointer to the info entry of the table - the last entry */ |
| struct sep_lli_entry_t *info_entry_ptr; |
| /* array of pointers ot page */ |
| struct sep_lli_entry_t *lli_array_ptr; |
| /* points to the first entry to be processed in the lli_in_array */ |
| unsigned long current_entry; |
| /* num entries in the virtual buffer */ |
| unsigned long sep_lli_entries; |
| /* lli table pointer */ |
| struct sep_lli_entry_t *in_lli_table_ptr; |
| /* the total data in one table */ |
| unsigned long table_data_size; |
| /* number of entries in lli table */ |
| unsigned long num_entries_in_table; |
| /* next table address */ |
| void *lli_table_alloc_addr; |
| unsigned long result; |
| |
| dbg("SEP Driver:--------> sep_prepare_input_dma_table start\n"); |
| |
| edbg("SEP Driver:data_size is %lu\n", data_size); |
| edbg("SEP Driver:block_size is %lu\n", block_size); |
| |
| /* initialize the pages pointers */ |
| sep->in_page_array = 0; |
| sep->in_num_pages = 0; |
| |
| if (data_size == 0) { |
| /* special case - created 2 entries table with zero data */ |
| in_lli_table_ptr = (struct sep_lli_entry_t *) (sep->shared_addr + SEP_DRIVER_SYNCHRONIC_DMA_TABLES_AREA_OFFSET_IN_BYTES); |
| /* FIXME: Should the entry below not be for _bus */ |
| in_lli_table_ptr->physical_address = (unsigned long)sep->shared_addr + SEP_DRIVER_SYNCHRONIC_DMA_TABLES_AREA_OFFSET_IN_BYTES; |
| in_lli_table_ptr->block_size = 0; |
| |
| in_lli_table_ptr++; |
| in_lli_table_ptr->physical_address = 0xFFFFFFFF; |
| in_lli_table_ptr->block_size = 0; |
| |
| *lli_table_ptr = sep->shared_bus + SEP_DRIVER_SYNCHRONIC_DMA_TABLES_AREA_OFFSET_IN_BYTES; |
| *num_entries_ptr = 2; |
| *table_data_size_ptr = 0; |
| |
| goto end_function; |
| } |
| |
| /* check if the pages are in Kernel Virtual Address layout */ |
| if (isKernelVirtualAddress == true) |
| /* lock the pages of the kernel buffer and translate them to pages */ |
| result = sep_lock_kernel_pages(sep, app_virt_addr, data_size, &sep->in_num_pages, &lli_array_ptr, &sep->in_page_array); |
| else |
| /* lock the pages of the user buffer and translate them to pages */ |
| result = sep_lock_user_pages(sep, app_virt_addr, data_size, &sep->in_num_pages, &lli_array_ptr, &sep->in_page_array); |
| |
| if (result) |
| return result; |
| |
| edbg("SEP Driver:output sep->in_num_pages is %lu\n", sep->in_num_pages); |
| |
| current_entry = 0; |
| info_entry_ptr = 0; |
| sep_lli_entries = sep->in_num_pages; |
| |
| /* initiate to point after the message area */ |
| lli_table_alloc_addr = sep->shared_addr + SEP_DRIVER_SYNCHRONIC_DMA_TABLES_AREA_OFFSET_IN_BYTES; |
| |
| /* loop till all the entries in in array are not processed */ |
| while (current_entry < sep_lli_entries) { |
| /* set the new input and output tables */ |
| in_lli_table_ptr = (struct sep_lli_entry_t *) lli_table_alloc_addr; |
| |
| lli_table_alloc_addr += sizeof(struct sep_lli_entry_t) * SEP_DRIVER_ENTRIES_PER_TABLE_IN_SEP; |
| |
| /* calculate the maximum size of data for input table */ |
| table_data_size = sep_calculate_lli_table_max_size(&lli_array_ptr[current_entry], (sep_lli_entries - current_entry)); |
| |
| /* now calculate the table size so that it will be module block size */ |
| table_data_size = (table_data_size / block_size) * block_size; |
| |
| edbg("SEP Driver:output table_data_size is %lu\n", table_data_size); |
| |
| /* construct input lli table */ |
| sep_build_lli_table(&lli_array_ptr[current_entry], in_lli_table_ptr, ¤t_entry, &num_entries_in_table, table_data_size); |
| |
| if (info_entry_ptr == 0) { |
| /* set the output parameters to physical addresses */ |
| *lli_table_ptr = sep_shared_virt_to_bus(sep, in_lli_table_ptr); |
| *num_entries_ptr = num_entries_in_table; |
| *table_data_size_ptr = table_data_size; |
| |
| edbg("SEP Driver:output lli_table_in_ptr is %08lx\n", *lli_table_ptr); |
| } else { |
| /* update the info entry of the previous in table */ |
| info_entry_ptr->physical_address = sep_shared_virt_to_bus(sep, in_lli_table_ptr); |
| info_entry_ptr->block_size = ((num_entries_in_table) << 24) | (table_data_size); |
| } |
| |
| /* save the pointer to the info entry of the current tables */ |
| info_entry_ptr = in_lli_table_ptr + num_entries_in_table - 1; |
| } |
| |
| /* print input tables */ |
| sep_debug_print_lli_tables(sep, (struct sep_lli_entry_t *) |
| sep_shared_bus_to_virt(sep, *lli_table_ptr), *num_entries_ptr, *table_data_size_ptr); |
| |
| /* the array of the pages */ |
| kfree(lli_array_ptr); |
| end_function: |
| dbg("SEP Driver:<-------- sep_prepare_input_dma_table end\n"); |
| return 0; |
| |
| } |
| |
| /* |
| This function creates the input and output dma tables for |
| symmetric operations (AES/DES) according to the block size from LLI arays |
| */ |
| static int sep_construct_dma_tables_from_lli(struct sep_device *sep, |
| struct sep_lli_entry_t *lli_in_array, |
| unsigned long sep_in_lli_entries, |
| struct sep_lli_entry_t *lli_out_array, |
| unsigned long sep_out_lli_entries, |
| unsigned long block_size, unsigned long *lli_table_in_ptr, unsigned long *lli_table_out_ptr, unsigned long *in_num_entries_ptr, unsigned long *out_num_entries_ptr, unsigned long *table_data_size_ptr) |
| { |
| /* points to the area where next lli table can be allocated: keep void * |
| as there is pointer scaling to fix otherwise */ |
| void *lli_table_alloc_addr; |
| /* input lli table */ |
| struct sep_lli_entry_t *in_lli_table_ptr; |
| /* output lli table */ |
| struct sep_lli_entry_t *out_lli_table_ptr; |
| /* pointer to the info entry of the table - the last entry */ |
| struct sep_lli_entry_t *info_in_entry_ptr; |
| /* pointer to the info entry of the table - the last entry */ |
| struct sep_lli_entry_t *info_out_entry_ptr; |
| /* points to the first entry to be processed in the lli_in_array */ |
| unsigned long current_in_entry; |
| /* points to the first entry to be processed in the lli_out_array */ |
| unsigned long current_out_entry; |
| /* max size of the input table */ |
| unsigned long in_table_data_size; |
| /* max size of the output table */ |
| unsigned long out_table_data_size; |
| /* flag te signifies if this is the first tables build from the arrays */ |
| unsigned long first_table_flag; |
| /* the data size that should be in table */ |
| unsigned long table_data_size; |
| /* number of etnries in the input table */ |
| unsigned long num_entries_in_table; |
| /* number of etnries in the output table */ |
| unsigned long num_entries_out_table; |
| |
| dbg("SEP Driver:--------> sep_construct_dma_tables_from_lli start\n"); |
| |
| /* initiate to pint after the message area */ |
| lli_table_alloc_addr = sep->shared_addr + SEP_DRIVER_SYNCHRONIC_DMA_TABLES_AREA_OFFSET_IN_BYTES; |
| |
| current_in_entry = 0; |
| current_out_entry = 0; |
| first_table_flag = 1; |
| info_in_entry_ptr = 0; |
| info_out_entry_ptr = 0; |
| |
| /* loop till all the entries in in array are not processed */ |
| while (current_in_entry < sep_in_lli_entries) { |
| /* set the new input and output tables */ |
| in_lli_table_ptr = (struct sep_lli_entry_t *) lli_table_alloc_addr; |
| |
| lli_table_alloc_addr += sizeof(struct sep_lli_entry_t) * SEP_DRIVER_ENTRIES_PER_TABLE_IN_SEP; |
| |
| /* set the first output tables */ |
| out_lli_table_ptr = (struct sep_lli_entry_t *) lli_table_alloc_addr; |
| |
| lli_table_alloc_addr += sizeof(struct sep_lli_entry_t) * SEP_DRIVER_ENTRIES_PER_TABLE_IN_SEP; |
| |
| /* calculate the maximum size of data for input table */ |
| in_table_data_size = sep_calculate_lli_table_max_size(&lli_in_array[current_in_entry], (sep_in_lli_entries - current_in_entry)); |
| |
| /* calculate the maximum size of data for output table */ |
| out_table_data_size = sep_calculate_lli_table_max_size(&lli_out_array[current_out_entry], (sep_out_lli_entries - current_out_entry)); |
| |
| edbg("SEP Driver:in_table_data_size is %lu\n", in_table_data_size); |
| edbg("SEP Driver:out_table_data_size is %lu\n", out_table_data_size); |
| |
| /* check where the data is smallest */ |
| table_data_size = in_table_data_size; |
| if (table_data_size > out_table_data_size) |
| table_data_size = out_table_data_size; |
| |
| /* now calculate the table size so that it will be module block size */ |
| table_data_size = (table_data_size / block_size) * block_size; |
| |
| dbg("SEP Driver:table_data_size is %lu\n", table_data_size); |
| |
| /* construct input lli table */ |
| sep_build_lli_table(&lli_in_array[current_in_entry], in_lli_table_ptr, ¤t_in_entry, &num_entries_in_table, table_data_size); |
| |
| /* construct output lli table */ |
| sep_build_lli_table(&lli_out_array[current_out_entry], out_lli_table_ptr, ¤t_out_entry, &num_entries_out_table, table_data_size); |
| |
| /* if info entry is null - this is the first table built */ |
| if (info_in_entry_ptr == 0) { |
| /* set the output parameters to physical addresses */ |
| *lli_table_in_ptr = sep_shared_virt_to_bus(sep, in_lli_table_ptr); |
| *in_num_entries_ptr = num_entries_in_table; |
| *lli_table_out_ptr = sep_shared_virt_to_bus(sep, out_lli_table_ptr); |
| *out_num_entries_ptr = num_entries_out_table; |
| *table_data_size_ptr = table_data_size; |
| |
| edbg("SEP Driver:output lli_table_in_ptr is %08lx\n", *lli_table_in_ptr); |
| edbg("SEP Driver:output lli_table_out_ptr is %08lx\n", *lli_table_out_ptr); |
| } else { |
| /* update the info entry of the previous in table */ |
| info_in_entry_ptr->physical_address = sep_shared_virt_to_bus(sep, in_lli_table_ptr); |
| info_in_entry_ptr->block_size = ((num_entries_in_table) << 24) | (table_data_size); |
| |
| /* update the info entry of the previous in table */ |
| info_out_entry_ptr->physical_address = sep_shared_virt_to_bus(sep, out_lli_table_ptr); |
| info_out_entry_ptr->block_size = ((num_entries_out_table) << 24) | (table_data_size); |
| } |
| |
| /* save the pointer to the info entry of the current tables */ |
| info_in_entry_ptr = in_lli_table_ptr + num_entries_in_table - 1; |
| info_out_entry_ptr = out_lli_table_ptr + num_entries_out_table - 1; |
| |
| edbg("SEP Driver:output num_entries_out_table is %lu\n", (unsigned long) num_entries_out_table); |
| edbg("SEP Driver:output info_in_entry_ptr is %lu\n", (unsigned long) info_in_entry_ptr); |
| edbg("SEP Driver:output info_out_entry_ptr is %lu\n", (unsigned long) info_out_entry_ptr); |
| } |
| |
| /* print input tables */ |
| sep_debug_print_lli_tables(sep, (struct sep_lli_entry_t *) |
| sep_shared_bus_to_virt(sep, *lli_table_in_ptr), *in_num_entries_ptr, *table_data_size_ptr); |
| /* print output tables */ |
| sep_debug_print_lli_tables(sep, (struct sep_lli_entry_t *) |
| sep_shared_bus_to_virt(sep, *lli_table_out_ptr), *out_num_entries_ptr, *table_data_size_ptr); |
| dbg("SEP Driver:<-------- sep_construct_dma_tables_from_lli end\n"); |
| return 0; |
| } |
| |
| |
| /* |
| This function builds input and output DMA tables for synhronic |
| symmetric operations (AES, DES). It also checks that each table |
| is of the modular block size |
| */ |
| static int sep_prepare_input_output_dma_table(struct sep_device *sep, |
| unsigned long app_virt_in_addr, |
| unsigned long app_virt_out_addr, |
| unsigned long data_size, |
| unsigned long block_size, |
| unsigned long *lli_table_in_ptr, unsigned long *lli_table_out_ptr, unsigned long *in_num_entries_ptr, unsigned long *out_num_entries_ptr, unsigned long *table_data_size_ptr, bool isKernelVirtualAddress) |
| { |
| /* array of pointers of page */ |
| struct sep_lli_entry_t *lli_in_array; |
| /* array of pointers of page */ |
| struct sep_lli_entry_t *lli_out_array; |
| int result = 0; |
| |
| dbg("SEP Driver:--------> sep_prepare_input_output_dma_table start\n"); |
| |
| /* initialize the pages pointers */ |
| sep->in_page_array = 0; |
| sep->out_page_array = 0; |
| |
| /* check if the pages are in Kernel Virtual Address layout */ |
| if (isKernelVirtualAddress == true) { |
| /* lock the pages of the kernel buffer and translate them to pages */ |
| result = sep_lock_kernel_pages(sep, app_virt_in_addr, data_size, &sep->in_num_pages, &lli_in_array, &sep->in_page_array); |
| if (result) { |
| edbg("SEP Driver: sep_lock_kernel_pages for input virtual buffer failed\n"); |
| goto end_function; |
| } |
| } else { |
| /* lock the pages of the user buffer and translate them to pages */ |
| result = sep_lock_user_pages(sep, app_virt_in_addr, data_size, &sep->in_num_pages, &lli_in_array, &sep->in_page_array); |
| if (result) { |
| edbg("SEP Driver: sep_lock_user_pages for input virtual buffer failed\n"); |
| goto end_function; |
| } |
| } |
| |
| if (isKernelVirtualAddress == true) { |
| result = sep_lock_kernel_pages(sep, app_virt_out_addr, data_size, &sep->out_num_pages, &lli_out_array, &sep->out_page_array); |
| if (result) { |
| edbg("SEP Driver: sep_lock_kernel_pages for output virtual buffer failed\n"); |
| goto end_function_with_error1; |
| } |
| } else { |
| result = sep_lock_user_pages(sep, app_virt_out_addr, data_size, &sep->out_num_pages, &lli_out_array, &sep->out_page_array); |
| if (result) { |
| edbg("SEP Driver: sep_lock_user_pages for output virtual buffer failed\n"); |
| goto end_function_with_error1; |
| } |
| } |
| edbg("sep->in_num_pages is %lu\n", sep->in_num_pages); |
| edbg("sep->out_num_pages is %lu\n", sep->out_num_pages); |
| edbg("SEP_DRIVER_ENTRIES_PER_TABLE_IN_SEP is %x\n", SEP_DRIVER_ENTRIES_PER_TABLE_IN_SEP); |
| |
| |
| /* call the fucntion that creates table from the lli arrays */ |
| result = sep_construct_dma_tables_from_lli(sep, lli_in_array, sep->in_num_pages, lli_out_array, sep->out_num_pages, block_size, lli_table_in_ptr, lli_table_out_ptr, in_num_entries_ptr, out_num_entries_ptr, table_data_size_ptr); |
| if (result) { |
| edbg("SEP Driver: sep_construct_dma_tables_from_lli failed\n"); |
| goto end_function_with_error2; |
| } |
| |
| /* fall through - free the lli entry arrays */ |
| dbg("in_num_entries_ptr is %08lx\n", *in_num_entries_ptr); |
| dbg("out_num_entries_ptr is %08lx\n", *out_num_entries_ptr); |
| dbg("table_data_size_ptr is %08lx\n", *table_data_size_ptr); |
| end_function_with_error2: |
| kfree(lli_out_array); |
| end_function_with_error1: |
| kfree(lli_in_array); |
| end_function: |
| dbg("SEP Driver:<-------- sep_prepare_input_output_dma_table end result = %d\n", (int) result); |
| return result; |
| |
| } |
| |
| /* |
| this function handles tha request for creation of the DMA table |
| for the synchronic symmetric operations (AES,DES) |
| */ |
| static int sep_create_sync_dma_tables_handler(struct sep_device *sep, |
| unsigned long arg) |
| { |
| int error; |
| /* command arguments */ |
| struct sep_driver_build_sync_table_t command_args; |
| |
| dbg("SEP Driver:--------> sep_create_sync_dma_tables_handler start\n"); |
| |
| error = copy_from_user(&command_args, (void *) arg, sizeof(struct sep_driver_build_sync_table_t)); |
| if (error) |
| goto end_function; |
| |
| edbg("app_in_address is %08lx\n", command_args.app_in_address); |
| edbg("app_out_address is %08lx\n", command_args.app_out_address); |
| edbg("data_size is %lu\n", command_args.data_in_size); |
| edbg("block_size is %lu\n", command_args.block_size); |
| |
| /* check if we need to build only input table or input/output */ |
| if (command_args.app_out_address) |
| /* prepare input and output tables */ |
| error = sep_prepare_input_output_dma_table(sep, |
| command_args.app_in_address, |
| command_args.app_out_address, |
| command_args.data_in_size, |
| command_args.block_size, |
| &command_args.in_table_address, |
| &command_args.out_table_address, &command_args.in_table_num_entries, &command_args.out_table_num_entries, &command_args.table_data_size, command_args.isKernelVirtualAddress); |
| else |
| /* prepare input tables */ |
| error = sep_prepare_input_dma_table(sep, |
| command_args.app_in_address, |
| command_args.data_in_size, command_args.block_size, &command_args.in_table_address, &command_args.in_table_num_entries, &command_args.table_data_size, command_args.isKernelVirtualAddress); |
| |
| if (error) |
| goto end_function; |
| /* copy to user */ |
| if (copy_to_user((void *) arg, (void *) &command_args, sizeof(struct sep_driver_build_sync_table_t))) |
| error = -EFAULT; |
| end_function: |
| dbg("SEP Driver:<-------- sep_create_sync_dma_tables_handler end\n"); |
| return error; |
| } |
| |
| /* |
| this function handles the request for freeing dma table for synhronic actions |
| */ |
| static int sep_free_dma_table_data_handler(struct sep_device *sep) |
| { |
| dbg("SEP Driver:--------> sep_free_dma_table_data_handler start\n"); |
| |
| /* free input pages array */ |
| sep_free_dma_pages(sep->in_page_array, sep->in_num_pages, 0); |
| |
| /* free output pages array if needed */ |
| if (sep->out_page_array) |
| sep_free_dma_pages(sep->out_page_array, sep->out_num_pages, 1); |
| |
| /* reset all the values */ |
| sep->in_page_array = 0; |
| sep->out_page_array = 0; |
| sep->in_num_pages = 0; |
| sep->out_num_pages = 0; |
| dbg("SEP Driver:<-------- sep_free_dma_table_data_handler end\n"); |
| return 0; |
| } |
| |
| /* |
| this function find a space for the new flow dma table |
| */ |
| static int sep_find_free_flow_dma_table_space(struct sep_device *sep, |
| unsigned long **table_address_ptr) |
| { |
| int error = 0; |
| /* pointer to the id field of the flow dma table */ |
| unsigned long *start_table_ptr; |
| /* Do not make start_addr unsigned long * unless fixing the offset |
| computations ! */ |
| void *flow_dma_area_start_addr; |
| unsigned long *flow_dma_area_end_addr; |
| /* maximum table size in words */ |
| unsigned long table_size_in_words; |
| |
| /* find the start address of the flow DMA table area */ |
| flow_dma_area_start_addr = sep->shared_addr + SEP_DRIVER_FLOW_DMA_TABLES_AREA_OFFSET_IN_BYTES; |
| |
| /* set end address of the flow table area */ |
| flow_dma_area_end_addr = flow_dma_area_start_addr + SEP_DRIVER_FLOW_DMA_TABLES_AREA_SIZE_IN_BYTES; |
| |
| /* set table size in words */ |
| table_size_in_words = SEP_DRIVER_MAX_FLOW_NUM_ENTRIES_IN_TABLE * (sizeof(struct sep_lli_entry_t) / sizeof(long)) + 2; |
| |
| /* set the pointer to the start address of DMA area */ |
| start_table_ptr = flow_dma_area_start_addr; |
| |
| /* find the space for the next table */ |
| while (((*start_table_ptr & 0x7FFFFFFF) != 0) && start_table_ptr < flow_dma_area_end_addr) |
| start_table_ptr += table_size_in_words; |
| |
| /* check if we reached the end of floa tables area */ |
| if (start_table_ptr >= flow_dma_area_end_addr) |
| error = -1; |
| else |
| *table_address_ptr = start_table_ptr; |
| |
| return error; |
| } |
| |
| /* |
| This function creates one DMA table for flow and returns its data, |
| and pointer to its info entry |
| */ |
| static int sep_prepare_one_flow_dma_table(struct sep_device *sep, |
| unsigned long virt_buff_addr, |
| unsigned long virt_buff_size, |
| struct sep_lli_entry_t *table_data, |
| struct sep_lli_entry_t **info_entry_ptr, |
| struct sep_flow_context_t *flow_data_ptr, |
| bool isKernelVirtualAddress) |
| { |
| int error; |
| /* the range in pages */ |
| unsigned long lli_array_size; |
| struct sep_lli_entry_t *lli_array; |
| struct sep_lli_entry_t *flow_dma_table_entry_ptr; |
| unsigned long *start_dma_table_ptr; |
| /* total table data counter */ |
| unsigned long dma_table_data_count; |
| /* pointer that will keep the pointer to the pages of the virtual buffer */ |
| struct page **page_array_ptr; |
| unsigned long entry_count; |
| |
| /* find the space for the new table */ |
| error = sep_find_free_flow_dma_table_space(sep, &start_dma_table_ptr); |
| if (error) |
| goto end_function; |
| |
| /* check if the pages are in Kernel Virtual Address layout */ |
| if (isKernelVirtualAddress == true) |
| /* lock kernel buffer in the memory */ |
| error = sep_lock_kernel_pages(sep, virt_buff_addr, virt_buff_size, &lli_array_size, &lli_array, &page_array_ptr); |
| else |
| /* lock user buffer in the memory */ |
| error = sep_lock_user_pages(sep, virt_buff_addr, virt_buff_size, &lli_array_size, &lli_array, &page_array_ptr); |
| |
| if (error) |
| goto end_function; |
| |
| /* set the pointer to page array at the beginning of table - this table is |
| now considered taken */ |
| *start_dma_table_ptr = lli_array_size; |
| |
| /* point to the place of the pages pointers of the table */ |
| start_dma_table_ptr++; |
| |
| /* set the pages pointer */ |
| *start_dma_table_ptr = (unsigned long) page_array_ptr; |
| |
| /* set the pointer to the first entry */ |
| flow_dma_table_entry_ptr = (struct sep_lli_entry_t *) (++start_dma_table_ptr); |
| |
| /* now create the entries for table */ |
| for (dma_table_data_count = entry_count = 0; entry_count < lli_array_size; entry_count++) { |
| flow_dma_table_entry_ptr->physical_address = lli_array[entry_count].physical_address; |
| |
| flow_dma_table_entry_ptr->block_size = lli_array[entry_count].block_size; |
| |
| /* set the total data of a table */ |
| dma_table_data_count += lli_array[entry_count].block_size; |
| |
| flow_dma_table_entry_ptr++; |
| } |
| |
| /* set the physical address */ |
| table_data->physical_address = virt_to_phys(start_dma_table_ptr); |
| |
| /* set the num_entries and total data size */ |
| table_data->block_size = ((lli_array_size + 1) << SEP_NUM_ENTRIES_OFFSET_IN_BITS) | (dma_table_data_count); |
| |
| /* set the info entry */ |
| flow_dma_table_entry_ptr->physical_address = 0xffffffff; |
| flow_dma_table_entry_ptr->block_size = 0; |
| |
| /* set the pointer to info entry */ |
| *info_entry_ptr = flow_dma_table_entry_ptr; |
| |
| /* the array of the lli entries */ |
| kfree(lli_array); |
| end_function: |
| return error; |
| } |
| |
| |
| |
| /* |
| This function creates a list of tables for flow and returns the data for |
| the first and last tables of the list |
| */ |
| static int sep_prepare_flow_dma_tables(struct sep_device *sep, |
| unsigned long num_virtual_buffers, |
| unsigned long first_buff_addr, struct sep_flow_context_t *flow_data_ptr, struct sep_lli_entry_t *first_table_data_ptr, struct sep_lli_entry_t *last_table_data_ptr, bool isKernelVirtualAddress) |
| { |
| int error; |
| unsigned long virt_buff_addr; |
| unsigned long virt_buff_size; |
| struct sep_lli_entry_t table_data; |
| struct sep_lli_entry_t *info_entry_ptr; |
| struct sep_lli_entry_t *prev_info_entry_ptr; |
| unsigned long i; |
| |
| /* init vars */ |
| error = 0; |
| prev_info_entry_ptr = 0; |
| |
| /* init the first table to default */ |
| table_data.physical_address = 0xffffffff; |
| first_table_data_ptr->physical_address = 0xffffffff; |
| table_data.block_size = 0; |
| |
| for (i = 0; i < num_virtual_buffers; i++) { |
| /* get the virtual buffer address */ |
| error = get_user(virt_buff_addr, &first_buff_addr); |
| if (error) |
| goto end_function; |
| |
| /* get the virtual buffer size */ |
| first_buff_addr++; |
| error = get_user(virt_buff_size, &first_buff_addr); |
| if (error) |
| goto end_function; |
| |
| /* advance the address to point to the next pair of address|size */ |
| first_buff_addr++; |
| |
| /* now prepare the one flow LLI table from the data */ |
| error = sep_prepare_one_flow_dma_table(sep, virt_buff_addr, virt_buff_size, &table_data, &info_entry_ptr, flow_data_ptr, isKernelVirtualAddress); |
| if (error) |
| goto end_function; |
| |
| if (i == 0) { |
| /* if this is the first table - save it to return to the user |
| application */ |
| *first_table_data_ptr = table_data; |
| |
| /* set the pointer to info entry */ |
| prev_info_entry_ptr = info_entry_ptr; |
| } else { |
| /* not first table - the previous table info entry should |
| be updated */ |
| prev_info_entry_ptr->block_size = (0x1 << SEP_INT_FLAG_OFFSET_IN_BITS) | (table_data.block_size); |
| |
| /* set the pointer to info entry */ |
| prev_info_entry_ptr = info_entry_ptr; |
| } |
| } |
| |
| /* set the last table data */ |
| *last_table_data_ptr = table_data; |
| end_function: |
| return error; |
| } |
| |
| /* |
| this function goes over all the flow tables connected to the given |
| table and deallocate them |
| */ |
| static void sep_deallocated_flow_tables(struct sep_lli_entry_t *first_table_ptr) |
| { |
| /* id pointer */ |
| unsigned long *table_ptr; |
| /* end address of the flow dma area */ |
| unsigned long num_entries; |
| unsigned long num_pages; |
| struct page **pages_ptr; |
| /* maximum table size in words */ |
| struct sep_lli_entry_t *info_entry_ptr; |
| |
| /* set the pointer to the first table */ |
| table_ptr = (unsigned long *) first_table_ptr->physical_address; |
| |
| /* set the num of entries */ |
| num_entries = (first_table_ptr->block_size >> SEP_NUM_ENTRIES_OFFSET_IN_BITS) |
| & SEP_NUM_ENTRIES_MASK; |
| |
| /* go over all the connected tables */ |
| while (*table_ptr != 0xffffffff) { |
| /* get number of pages */ |
| num_pages = *(table_ptr - 2); |
| |
| /* get the pointer to the pages */ |
| pages_ptr = (struct page **) (*(table_ptr - 1)); |
| |
| /* free the pages */ |
| sep_free_dma_pages(pages_ptr, num_pages, 1); |
| |
| /* goto to the info entry */ |
| info_entry_ptr = ((struct sep_lli_entry_t *) table_ptr) + (num_entries - 1); |
| |
| table_ptr = (unsigned long *) info_entry_ptr->physical_address; |
| num_entries = (info_entry_ptr->block_size >> SEP_NUM_ENTRIES_OFFSET_IN_BITS) & SEP_NUM_ENTRIES_MASK; |
| } |
| |
| return; |
| } |
| |
| /** |
| * sep_find_flow_context - find a flow |
| * @sep: the SEP we are working with |
| * @flow_id: flow identifier |
| * |
| * Returns a pointer the matching flow, or NULL if the flow does not |
| * exist. |
| */ |
| |
| static struct sep_flow_context_t *sep_find_flow_context(struct sep_device *sep, |
| unsigned long flow_id) |
| { |
| int count; |
| /* |
| * always search for flow with id default first - in case we |
| * already started working on the flow there can be no situation |
| * when 2 flows are with default flag |
| */ |
| for (count = 0; count < SEP_DRIVER_NUM_FLOWS; count++) { |
| if (sep->flows[count].flow_id == flow_id) |
| return &sep->flows[count]; |
| } |
| return NULL; |
| } |
| |
| |
| /* |
| this function handles the request to create the DMA tables for flow |
| */ |
| static int sep_create_flow_dma_tables_handler(struct sep_device *sep, |
| unsigned long arg) |
| { |
| int error = -ENOENT; |
| struct sep_driver_build_flow_table_t command_args; |
| /* first table - output */ |
| struct sep_lli_entry_t first_table_data; |
| /* dma table data */ |
| struct sep_lli_entry_t last_table_data; |
| /* pointer to the info entry of the previuos DMA table */ |
| struct sep_lli_entry_t *prev_info_entry_ptr; |
| /* pointer to the flow data strucutre */ |
| struct sep_flow_context_t *flow_context_ptr; |
| |
| dbg("SEP Driver:--------> sep_create_flow_dma_tables_handler start\n"); |
| |
| /* init variables */ |
| prev_info_entry_ptr = 0; |
| first_table_data.physical_address = 0xffffffff; |
| |
| /* find the free structure for flow data */ |
| error = -EINVAL; |
| flow_context_ptr = sep_find_flow_context(sep, SEP_FREE_FLOW_ID); |
| if (flow_context_ptr == NULL) |
| goto end_function; |
| |
| error = copy_from_user(&command_args, (void *) arg, sizeof(struct sep_driver_build_flow_table_t)); |
| if (error) |
| goto end_function; |
| |
| /* create flow tables */ |
| error = sep_prepare_flow_dma_tables(sep, command_args.num_virtual_buffers, command_args.virt_buff_data_addr, flow_context_ptr, &first_table_data, &last_table_data, command_args.isKernelVirtualAddress); |
| if (error) |
| goto end_function_with_error; |
| |
| /* check if flow is static */ |
| if (!command_args.flow_type) |
| /* point the info entry of the last to the info entry of the first */ |
| last_table_data = first_table_data; |
| |
| /* set output params */ |
| command_args.first_table_addr = first_table_data.physical_address; |
| command_args.first_table_num_entries = ((first_table_data.block_size >> SEP_NUM_ENTRIES_OFFSET_IN_BITS) & SEP_NUM_ENTRIES_MASK); |
| command_args.first_table_data_size = (first_table_data.block_size & SEP_TABLE_DATA_SIZE_MASK); |
| |
| /* send the parameters to user application */ |
| error = copy_to_user((void *) arg, &command_args, sizeof(struct sep_driver_build_flow_table_t)); |
| if (error) |
| goto end_function_with_error; |
| |
| /* all the flow created - update the flow entry with temp id */ |
| flow_context_ptr->flow_id = SEP_TEMP_FLOW_ID; |
| |
| /* set the processing tables data in the context */ |
| if (command_args.input_output_flag == SEP_DRIVER_IN_FLAG) |
| flow_context_ptr->input_tables_in_process = first_table_data; |
| else |
| flow_context_ptr->output_tables_in_process = first_table_data; |
| |
| goto end_function; |
| |
| end_function_with_error: |
| /* free the allocated tables */ |
| sep_deallocated_flow_tables(&first_table_data); |
| end_function: |
| dbg("SEP Driver:<-------- sep_create_flow_dma_tables_handler end\n"); |
| return error; |
| } |
| |
| /* |
| this function handles add tables to flow |
| */ |
| static int sep_add_flow_tables_handler(struct sep_device *sep, unsigned long arg) |
| { |
| int error; |
| unsigned long num_entries; |
| struct sep_driver_add_flow_table_t command_args; |
| struct sep_flow_context_t *flow_context_ptr; |
| /* first dma table data */ |
| struct sep_lli_entry_t first_table_data; |
| /* last dma table data */ |
| struct sep_lli_entry_t last_table_data; |
| /* pointer to the info entry of the current DMA table */ |
| struct sep_lli_entry_t *info_entry_ptr; |
| |
| dbg("SEP Driver:--------> sep_add_flow_tables_handler start\n"); |
| |
| /* get input parameters */ |
| error = copy_from_user(&command_args, (void *) arg, sizeof(struct sep_driver_add_flow_table_t)); |
| if (error) |
| goto end_function; |
| |
| /* find the flow structure for the flow id */ |
| flow_context_ptr = sep_find_flow_context(sep, command_args.flow_id); |
| if (flow_context_ptr == NULL) |
| goto end_function; |
| |
| /* prepare the flow dma tables */ |
| error = sep_prepare_flow_dma_tables(sep, command_args.num_virtual_buffers, command_args.virt_buff_data_addr, flow_context_ptr, &first_table_data, &last_table_data, command_args.isKernelVirtualAddress); |
| if (error) |
| goto end_function_with_error; |
| |
| /* now check if there is already an existing add table for this flow */ |
| if (command_args.inputOutputFlag == SEP_DRIVER_IN_FLAG) { |
| /* this buffer was for input buffers */ |
| if (flow_context_ptr->input_tables_flag) { |
| /* add table already exists - add the new tables to the end |
| of the previous */ |
| num_entries = (flow_context_ptr->last_input_table.block_size >> SEP_NUM_ENTRIES_OFFSET_IN_BITS) & SEP_NUM_ENTRIES_MASK; |
| |
| info_entry_ptr = (struct sep_lli_entry_t *) |
| (flow_context_ptr->last_input_table.physical_address + (sizeof(struct sep_lli_entry_t) * (num_entries - 1))); |
| |
| /* connect to list of tables */ |
| *info_entry_ptr = first_table_data; |
| |
| /* set the first table data */ |
| first_table_data = flow_context_ptr->first_input_table; |
| } else { |
| /* set the input flag */ |
| flow_context_ptr->input_tables_flag = 1; |
| |
| /* set the first table data */ |
| flow_context_ptr->first_input_table = first_table_data; |
| } |
| /* set the last table data */ |
| flow_context_ptr->last_input_table = last_table_data; |
| } else { /* this is output tables */ |
| |
| /* this buffer was for input buffers */ |
| if (flow_context_ptr->output_tables_flag) { |
| /* add table already exists - add the new tables to |
| the end of the previous */ |
| num_entries = (flow_context_ptr->last_output_table.block_size >> SEP_NUM_ENTRIES_OFFSET_IN_BITS) & SEP_NUM_ENTRIES_MASK; |
| |
| info_entry_ptr = (struct sep_lli_entry_t *) |
| (flow_context_ptr->last_output_table.physical_address + (sizeof(struct sep_lli_entry_t) * (num_entries - 1))); |
| |
| /* connect to list of tables */ |
| *info_entry_ptr = first_table_data; |
| |
| /* set the first table data */ |
| first_table_data = flow_context_ptr->first_output_table; |
| } else { |
| /* set the input flag */ |
| flow_context_ptr->output_tables_flag = 1; |
| |
| /* set the first table data */ |
| flow_context_ptr->first_output_table = first_table_data; |
| } |
| /* set the last table data */ |
| flow_context_ptr->last_output_table = last_table_data; |
| } |
| |
| /* set output params */ |
| command_args.first_table_addr = first_table_data.physical_address; |
| command_args.first_table_num_entries = ((first_table_data.block_size >> SEP_NUM_ENTRIES_OFFSET_IN_BITS) & SEP_NUM_ENTRIES_MASK); |
| command_args.first_table_data_size = (first_table_data.block_size & SEP_TABLE_DATA_SIZE_MASK); |
| |
| /* send the parameters to user application */ |
| error = copy_to_user((void *) arg, &command_args, sizeof(struct sep_driver_add_flow_table_t)); |
| end_function_with_error: |
| /* free the allocated tables */ |
| sep_deallocated_flow_tables(&first_table_data); |
| end_function: |
| dbg("SEP Driver:<-------- sep_add_flow_tables_handler end\n"); |
| return error; |
| } |
| |
| /* |
| this function add the flow add message to the specific flow |
| */ |
| static int sep_add_flow_tables_message_handler(struct sep_device *sep, unsigned long arg) |
| { |
| int error; |
| struct sep_driver_add_message_t command_args; |
| struct sep_flow_context_t *flow_context_ptr; |
| |
| dbg("SEP Driver:--------> sep_add_flow_tables_message_handler start\n"); |
| |
| error = copy_from_user(&command_args, (void *) arg, sizeof(struct sep_driver_add_message_t)); |
| if (error) |
| goto end_function; |
| |
| /* check input */ |
| if (command_args.message_size_in_bytes > SEP_MAX_ADD_MESSAGE_LENGTH_IN_BYTES) { |
| error = -ENOMEM; |
| goto end_function; |
| } |
| |
| /* find the flow context */ |
| flow_context_ptr = sep_find_flow_context(sep, command_args.flow_id); |
| if (flow_context_ptr == NULL) |
| goto end_function; |
| |
| /* copy the message into context */ |
| flow_context_ptr->message_size_in_bytes = command_args.message_size_in_bytes; |
| error = copy_from_user(flow_context_ptr->message, (void *) command_args.message_address, command_args.message_size_in_bytes); |
| end_function: |
| dbg("SEP Driver:<-------- sep_add_flow_tables_message_handler end\n"); |
| return error; |
| } |
| |
| |
| /* |
| this function returns the bus and virtual addresses of the static pool |
| */ |
| static int sep_get_static_pool_addr_handler(struct sep_device *sep, unsigned long arg) |
| { |
| int error; |
| struct sep_driver_static_pool_addr_t command_args; |
| |
| dbg("SEP Driver:--------> sep_get_static_pool_addr_handler start\n"); |
| |
| /*prepare the output parameters in the struct */ |
| command_args.physical_static_address = sep->shared_bus + SEP_DRIVER_STATIC_AREA_OFFSET_IN_BYTES; |
| command_args.virtual_static_address = (unsigned long)sep->shared_addr + SEP_DRIVER_STATIC_AREA_OFFSET_IN_BYTES; |
| |
| edbg("SEP Driver:bus_static_address is %08lx, virtual_static_address %08lx\n", command_args.physical_static_address, command_args.virtual_static_address); |
| |
| /* send the parameters to user application */ |
| error = copy_to_user((void *) arg, &command_args, sizeof(struct sep_driver_static_pool_addr_t)); |
| dbg("SEP Driver:<-------- sep_get_static_pool_addr_handler end\n"); |
| return error; |
| } |
| |
| /* |
| this address gets the offset of the physical address from the start |
| of the mapped area |
| */ |
| static int sep_get_physical_mapped_offset_handler(struct sep_device *sep, unsigned long arg) |
| { |
| int error; |
| struct sep_driver_get_mapped_offset_t command_args; |
| |
| dbg("SEP Driver:--------> sep_get_physical_mapped_offset_handler start\n"); |
| |
| error = copy_from_user(&command_args, (void *) arg, sizeof(struct sep_driver_get_mapped_offset_t)); |
| if (error) |
| goto end_function; |
| |
| if (command_args.physical_address < sep->shared_bus) { |
| error = -EINVAL; |
| goto end_function; |
| } |
| |
| /*prepare the output parameters in the struct */ |
| command_args.offset = command_args.physical_address - sep->shared_bus; |
| |
| edbg("SEP Driver:bus_address is %08lx, offset is %lu\n", command_args.physical_address, command_args.offset); |
| |
| /* send the parameters to user application */ |
| error = copy_to_user((void *) arg, &command_args, sizeof(struct sep_driver_get_mapped_offset_t)); |
| end_function: |
| dbg("SEP Driver:<-------- sep_get_physical_mapped_offset_handler end\n"); |
| return error; |
| } |
| |
| |
| /* |
| ? |
| */ |
| static int sep_start_handler(struct sep_device *sep) |
| { |
| unsigned long reg_val; |
| unsigned long error = 0; |
| |
| dbg("SEP Driver:--------> sep_start_handler start\n"); |
| |
| /* wait in polling for message from SEP */ |
| do |
| reg_val = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR3_REG_ADDR); |
| while (!reg_val); |
| |
| /* check the value */ |
| if (reg_val == 0x1) |
| /* fatal error - read error status from GPRO */ |
| error = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR0_REG_ADDR); |
| dbg("SEP Driver:<-------- sep_start_handler end\n"); |
| return error; |
| } |
| |
| /* |
| this function handles the request for SEP initialization |
| */ |
| static int sep_init_handler(struct sep_device *sep, unsigned long arg) |
| { |
| unsigned long message_word; |
| unsigned long *message_ptr; |
| struct sep_driver_init_t command_args; |
| unsigned long counter; |
| unsigned long error; |
| unsigned long reg_val; |
| |
| dbg("SEP Driver:--------> sep_init_handler start\n"); |
| error = 0; |
| |
| error = copy_from_user(&command_args, (void *) arg, sizeof(struct sep_driver_init_t)); |
| |
| dbg("SEP Driver:--------> sep_init_handler - finished copy_from_user \n"); |
| |
| if (error) |
| goto end_function; |
| |
| /* PATCH - configure the DMA to single -burst instead of multi-burst */ |
| /*sep_configure_dma_burst(); */ |
| |
| dbg("SEP Driver:--------> sep_init_handler - finished sep_configure_dma_burst \n"); |
| |
| message_ptr = (unsigned long *) command_args.message_addr; |
| |
| /* set the base address of the SRAM */ |
| sep_write_reg(sep, HW_SRAM_ADDR_REG_ADDR, HW_CC_SRAM_BASE_ADDRESS); |
| |
| for (counter = 0; counter < command_args.message_size_in_words; counter++, message_ptr++) { |
| get_user(message_word, message_ptr); |
| /* write data to SRAM */ |
| sep_write_reg(sep, HW_SRAM_DATA_REG_ADDR, message_word); |
| edbg("SEP Driver:message_word is %lu\n", message_word); |
| /* wait for write complete */ |
| sep_wait_sram_write(sep); |
| } |
| dbg("SEP Driver:--------> sep_init_handler - finished getting messages from user space\n"); |
| /* signal SEP */ |
| sep_write_reg(sep, HW_HOST_HOST_SEP_GPR0_REG_ADDR, 0x1); |
| |
| do |
| reg_val = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR3_REG_ADDR); |
| while (!(reg_val & 0xFFFFFFFD)); |
| |
| dbg("SEP Driver:--------> sep_init_handler - finished waiting for reg_val & 0xFFFFFFFD \n"); |
| |
| /* check the value */ |
| if (reg_val == 0x1) { |
| edbg("SEP Driver:init failed\n"); |
| |
| error = sep_read_reg(sep, 0x8060); |
| edbg("SEP Driver:sw monitor is %lu\n", error); |
| |
| /* fatal error - read erro status from GPRO */ |
| error = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR0_REG_ADDR); |
| edbg("SEP Driver:error is %lu\n", error); |
| } |
| end_function: |
| dbg("SEP Driver:<-------- sep_init_handler end\n"); |
| return error; |
| |
| } |
| |
| /* |
| this function handles the request cache and resident reallocation |
| */ |
| static int sep_realloc_cache_resident_handler(struct sep_device *sep, |
| unsigned long arg) |
| { |
| struct sep_driver_realloc_cache_resident_t command_args; |
| int error; |
| |
| /* copy cache and resident to the their intended locations */ |
| error = sep_load_firmware(sep); |
| if (error) |
| return error; |
| |
| command_args.new_base_addr = sep->shared_bus; |
| |
| /* find the new base address according to the lowest address between |
| cache, resident and shared area */ |
| if (sep->resident_bus < command_args.new_base_addr) |
| command_args.new_base_addr = sep->resident_bus; |
| if (sep->rar_bus < command_args.new_base_addr) |
| command_args.new_base_addr = sep->rar_bus; |
| |
| /* set the return parameters */ |
| command_args.new_cache_addr = sep->rar_bus; |
| command_args.new_resident_addr = sep->resident_bus; |
| |
| /* set the new shared area */ |
| command_args.new_shared_area_addr = sep->shared_bus; |
| |
| edbg("SEP Driver:command_args.new_shared_addr is %08llx\n", command_args.new_shared_area_addr); |
| edbg("SEP Driver:command_args.new_base_addr is %08llx\n", command_args.new_base_addr); |
| edbg("SEP Driver:command_args.new_resident_addr is %08llx\n", command_args.new_resident_addr); |
| edbg("SEP Driver:command_args.new_rar_addr is %08llx\n", command_args.new_cache_addr); |
| |
| /* return to user */ |
| if (copy_to_user((void *) arg, &command_args, sizeof(struct sep_driver_realloc_cache_resident_t))) |
| return -EFAULT; |
| return 0; |
| } |
| |
| /** |
| * sep_get_time_handler - time request from user space |
| * @sep: sep we are to set the time for |
| * @arg: pointer to user space arg buffer |
| * |
| * This function reports back the time and the address in the SEP |
| * shared buffer at which it has been placed. (Do we really need this!!!) |
| */ |
| |
| static int sep_get_time_handler(struct sep_device *sep, unsigned long arg) |
| { |
| struct sep_driver_get_time_t command_args; |
| |
| mutex_lock(&sep_mutex); |
| command_args.time_value = sep_set_time(sep); |
| command_args.time_physical_address = (unsigned long)sep_time_address(sep); |
| mutex_unlock(&sep_mutex); |
| if (copy_to_user((void __user *)arg, |
| &command_args, sizeof(struct sep_driver_get_time_t))) |
| return -EFAULT; |
| return 0; |
| |
| } |
| |
| /* |
| This API handles the end transaction request |
| */ |
| static int sep_end_transaction_handler(struct sep_device *sep, unsigned long arg) |
| { |
| dbg("SEP Driver:--------> sep_end_transaction_handler start\n"); |
| |
| #if 0 /*!SEP_DRIVER_POLLING_MODE */ |
| /* close IMR */ |
| sep_write_reg(sep, HW_HOST_IMR_REG_ADDR, 0x7FFF); |
| |
| /* release IRQ line */ |
| free_irq(SEP_DIRVER_IRQ_NUM, sep); |
| |
| /* lock the sep mutex */ |
| mutex_unlock(&sep_mutex); |
| #endif |
| |
| dbg("SEP Driver:<-------- sep_end_transaction_handler end\n"); |
| |
| return 0; |
| } |
| |
| |
| /** |
| * sep_set_flow_id_handler - handle flow setting |
| * @sep: the SEP we are configuring |
| * @flow_id: the flow we are setting |
| * |
| * This function handler the set flow id command |
| */ |
| static int sep_set_flow_id_handler(struct sep_device *sep, |
| unsigned long flow_id) |
| { |
| int error = 0; |
| struct sep_flow_context_t *flow_data_ptr; |
| |
| /* find the flow data structure that was just used for creating new flow |
| - its id should be default */ |
| |
| mutex_lock(&sep_mutex); |
| flow_data_ptr = sep_find_flow_context(sep, SEP_TEMP_FLOW_ID); |
| if (flow_data_ptr) |
| flow_data_ptr->flow_id = flow_id; /* set flow id */ |
| else |
| error = -EINVAL; |
| mutex_unlock(&sep_mutex); |
| return error; |
| } |
| |
| static long sep_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) |
| { |
| int error = 0; |
| struct sep_device *sep = filp->private_data; |
| |
| dbg("------------>SEP Driver: ioctl start\n"); |
| |
| edbg("SEP Driver: cmd is %x\n", cmd); |
| |
| switch (cmd) { |
| case SEP_IOCSENDSEPCOMMAND: |
| /* send command to SEP */ |
| sep_send_command_handler(sep); |
| edbg("SEP Driver: after sep_send_command_handler\n"); |
| break; |
| case SEP_IOCSENDSEPRPLYCOMMAND: |
| /* send reply command to SEP */ |
| sep_send_reply_command_handler(sep); |
| break; |
| case SEP_IOCALLOCDATAPOLL: |
| /* allocate data pool */ |
| error = sep_allocate_data_pool_memory_handler(sep, arg); |
| break; |
| case SEP_IOCWRITEDATAPOLL: |
| /* write data into memory pool */ |
| error = sep_write_into_data_pool_handler(sep, arg); |
| break; |
| case SEP_IOCREADDATAPOLL: |
| /* read data from data pool into application memory */ |
| error = sep_read_from_data_pool_handler(sep, arg); |
| break; |
| case SEP_IOCCREATESYMDMATABLE: |
| /* create dma table for synhronic operation */ |
| error = sep_create_sync_dma_tables_handler(sep, arg); |
| break; |
| case SEP_IOCCREATEFLOWDMATABLE: |
| /* create flow dma tables */ |
| error = sep_create_flow_dma_tables_handler(sep, arg); |
| break; |
| case SEP_IOCFREEDMATABLEDATA: |
| /* free the pages */ |
| error = sep_free_dma_table_data_handler(sep); |
| break; |
| case SEP_IOCSETFLOWID: |
| /* set flow id */ |
| error = sep_set_flow_id_handler(sep, (unsigned long)arg); |
| break; |
| case SEP_IOCADDFLOWTABLE: |
| /* add tables to the dynamic flow */ |
| error = sep_add_flow_tables_handler(sep, arg); |
| break; |
| case SEP_IOCADDFLOWMESSAGE: |
| /* add message of add tables to flow */ |
| error = sep_add_flow_tables_message_handler(sep, arg); |
| break; |
| case SEP_IOCSEPSTART: |
| /* start command to sep */ |
| error = sep_start_handler(sep); |
| break; |
| case SEP_IOCSEPINIT: |
| /* init command to sep */ |
| error = sep_init_handler(sep, arg); |
| break; |
| case SEP_IOCGETSTATICPOOLADDR: |
| /* get the physical and virtual addresses of the static pool */ |
| error = sep_get_static_pool_addr_handler(sep, arg); |
| break; |
| case SEP_IOCENDTRANSACTION: |
| error = sep_end_transaction_handler(sep, arg); |
| break; |
| case SEP_IOCREALLOCCACHERES: |
| error = sep_realloc_cache_resident_handler(sep, arg); |
| break; |
| case SEP_IOCGETMAPPEDADDROFFSET: |
| error = sep_get_physical_mapped_offset_handler(sep, arg); |
| break; |
| case SEP_IOCGETIME: |
| error = sep_get_time_handler(sep, arg); |
| break; |
| default: |
| error = -ENOTTY; |
| break; |
| } |
| dbg("SEP Driver:<-------- ioctl end\n"); |
| return error; |
| } |
| |
| |
| |
| #if !SEP_DRIVER_POLLING_MODE |
| |
| /* handler for flow done interrupt */ |
| |
| static void sep_flow_done_handler(struct work_struct *work) |
| { |
| struct sep_flow_context_t *flow_data_ptr; |
| |
| /* obtain the mutex */ |
| mutex_lock(&sep_mutex); |
| |
| /* get the pointer to context */ |
| flow_data_ptr = (struct sep_flow_context_t *) work; |
| |
| /* free all the current input tables in sep */ |
| sep_deallocated_flow_tables(&flow_data_ptr->input_tables_in_process); |
| |
| /* free all the current tables output tables in SEP (if needed) */ |
| if (flow_data_ptr->output_tables_in_process.physical_address != 0xffffffff) |
| sep_deallocated_flow_tables(&flow_data_ptr->output_tables_in_process); |
| |
| /* check if we have additional tables to be sent to SEP only input |
| flag may be checked */ |
| if (flow_data_ptr->input_tables_flag) { |
| /* copy the message to the shared RAM and signal SEP */ |
| memcpy((void *) flow_data_ptr->message, (void *) sep->shared_addr, flow_data_ptr->message_size_in_bytes); |
| |
| sep_write_reg(sep, HW_HOST_HOST_SEP_GPR2_REG_ADDR, 0x2); |
| } |
| mutex_unlock(&sep_mutex); |
| } |
| /* |
| interrupt handler function |
| */ |
| static irqreturn_t sep_inthandler(int irq, void *dev_id) |
| { |
| irqreturn_t int_error; |
| unsigned long reg_val; |
| unsigned long flow_id; |
| struct sep_flow_context_t *flow_context_ptr; |
| struct sep_device *sep = dev_id; |
| |
| int_error = IRQ_HANDLED; |
| |
| /* read the IRR register to check if this is SEP interrupt */ |
| reg_val = sep_read_reg(sep, HW_HOST_IRR_REG_ADDR); |
| edbg("SEP Interrupt - reg is %08lx\n", reg_val); |
| |
| /* check if this is the flow interrupt */ |
| if (0 /*reg_val & (0x1 << 11) */ ) { |
| /* read GPRO to find out the which flow is done */ |
| flow_id = sep_read_reg(sep, HW_HOST_IRR_REG_ADDR); |
| |
| /* find the contex of the flow */ |
| flow_context_ptr = sep_find_flow_context(sep, flow_id >> 28); |
| if (flow_context_ptr == NULL) |
| goto end_function_with_error; |
| |
| /* queue the work */ |
| INIT_WORK(&flow_context_ptr->flow_wq, sep_flow_done_handler); |
| queue_work(sep->flow_wq, &flow_context_ptr->flow_wq); |
| |
| } else { |
| /* check if this is reply interrupt from SEP */ |
| if (reg_val & (0x1 << 13)) { |
| /* update the counter of reply messages */ |
| sep->reply_ct++; |
| /* wake up the waiting process */ |
| wake_up(&sep_event); |
| } else { |
| int_error = IRQ_NONE; |
| goto end_function; |
| } |
| } |
| end_function_with_error: |
| /* clear the interrupt */ |
| sep_write_reg(sep, HW_HOST_ICR_REG_ADDR, reg_val); |
| end_function: |
| return int_error; |
| } |
| |
| #endif |
| |
| |
| |
| #if 0 |
| |
| static void sep_wait_busy(struct sep_device *sep) |
| { |
| u32 reg; |
| |
| do { |
| reg = sep_read_reg(sep, HW_HOST_SEP_BUSY_REG_ADDR); |
| } while (reg); |
| } |
| |
| /* |
| PATCH for configuring the DMA to single burst instead of multi-burst |
| */ |
| static void sep_configure_dma_burst(struct sep_device *sep) |
| { |
| #define HW_AHB_RD_WR_BURSTS_REG_ADDR 0x0E10UL |
| |
| dbg("SEP Driver:<-------- sep_configure_dma_burst start \n"); |
| |
| /* request access to registers from SEP */ |
| sep_write_reg(sep, HW_HOST_HOST_SEP_GPR0_REG_ADDR, 0x2); |
| |
| dbg("SEP Driver:<-------- sep_configure_dma_burst finished request access to registers from SEP (write reg) \n"); |
| |
| sep_wait_busy(sep); |
| |
| dbg("SEP Driver:<-------- sep_configure_dma_burst finished request access to registers from SEP (while(revVal) wait loop) \n"); |
| |
| /* set the DMA burst register to single burst */ |
| sep_write_reg(sep, HW_AHB_RD_WR_BURSTS_REG_ADDR, 0x0UL); |
| |
| /* release the sep busy */ |
| sep_write_reg(sep, HW_HOST_HOST_SEP_GPR0_REG_ADDR, 0x0UL); |
| sep_wait_busy(sep); |
| |
| dbg("SEP Driver:<-------- sep_configure_dma_burst done \n"); |
| |
| } |
| |
| #endif |
| |
| /* |
| Function that is activated on the successful probe of the SEP device |
| */ |
| static int __devinit sep_probe(struct pci_dev *pdev, const struct pci_device_id *ent) |
| { |
| int error = 0; |
| struct sep_device *sep; |
| int counter; |
| int size; /* size of memory for allocation */ |
| |
| edbg("Sep pci probe starting\n"); |
| if (sep_dev != NULL) { |
| dev_warn(&pdev->dev, "only one SEP supported.\n"); |
| return -EBUSY; |
| } |
| |
| /* enable the device */ |
| error = pci_enable_device(pdev); |
| if (error) { |
| edbg("error enabling pci device\n"); |
| goto end_function; |
| } |
| |
| /* set the pci dev pointer */ |
| sep_dev = &sep_instance; |
| sep = &sep_instance; |
| |
| edbg("sep->shared_addr = %p\n", sep->shared_addr); |
| /* transaction counter that coordinates the transactions between SEP |
| and HOST */ |
| sep->send_ct = 0; |
| /* counter for the messages from sep */ |
| sep->reply_ct = 0; |
| /* counter for the number of bytes allocated in the pool |
| for the current transaction */ |
| sep->data_pool_bytes_allocated = 0; |
| |
| /* calculate the total size for allocation */ |
| size = SEP_DRIVER_MESSAGE_SHARED_AREA_SIZE_IN_BYTES + |
| SEP_DRIVER_SYNCHRONIC_DMA_TABLES_AREA_SIZE_IN_BYTES + SEP_DRIVER_DATA_POOL_SHARED_AREA_SIZE_IN_BYTES + SEP_DRIVER_FLOW_DMA_TABLES_AREA_SIZE_IN_BYTES + SEP_DRIVER_STATIC_AREA_SIZE_IN_BYTES + SEP_DRIVER_SYSTEM_DATA_MEMORY_SIZE_IN_BYTES; |
| |
| /* allocate the shared area */ |
| if (sep_map_and_alloc_shared_area(sep, size)) { |
| error = -ENOMEM; |
| /* allocation failed */ |
| goto end_function_error; |
| } |
| /* now set the memory regions */ |
| #if (SEP_DRIVER_RECONFIG_MESSAGE_AREA == 1) |
| /* Note: this test section will need moving before it could ever |
| work as the registers are not yet mapped ! */ |
| /* send the new SHARED MESSAGE AREA to the SEP */ |
| sep_write_reg(sep, HW_HOST_HOST_SEP_GPR1_REG_ADDR, sep->shared_bus); |
| |
| /* poll for SEP response */ |
| retval = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR1_REG_ADDR); |
| while (retval != 0xffffffff && retval != sep->shared_bus) |
| retval = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR1_REG_ADDR); |
| |
| /* check the return value (register) */ |
| if (retval != sep->shared_bus) { |
| error = -ENOMEM; |
| goto end_function_deallocate_sep_shared_area; |
| } |
| #endif |
| /* init the flow contextes */ |
| for (counter = 0; counter < SEP_DRIVER_NUM_FLOWS; counter++) |
| sep->flows[counter].flow_id = SEP_FREE_FLOW_ID; |
| |
| sep->flow_wq = create_singlethread_workqueue("sepflowwq"); |
| if (sep->flow_wq == NULL) { |
| error = -ENOMEM; |
| edbg("sep_driver:flow queue creation failed\n"); |
| goto end_function_deallocate_sep_shared_area; |
| } |
| edbg("SEP Driver: create flow workqueue \n"); |
| sep->pdev = pci_dev_get(pdev); |
| |
| sep->reg_addr = pci_ioremap_bar(pdev, 0); |
| if (!sep->reg_addr) { |
| edbg("sep: ioremap of registers failed.\n"); |
| goto end_function_deallocate_sep_shared_area; |
| } |
| edbg("SEP Driver:reg_addr is %p\n", sep->reg_addr); |
| |
| /* load the rom code */ |
| sep_load_rom_code(sep); |
| |
| /* set up system base address and shared memory location */ |
| sep->rar_addr = dma_alloc_coherent(&sep->pdev->dev, |
| 2 * SEP_RAR_IO_MEM_REGION_SIZE, |
| &sep->rar_bus, GFP_KERNEL); |
| |
| if (!sep->rar_addr) { |
| edbg("SEP Driver:can't allocate rar\n"); |
| goto end_function_uniomap; |
| } |
| |
| |
| edbg("SEP Driver:rar_bus is %08llx\n", (unsigned long long)sep->rar_bus); |
| edbg("SEP Driver:rar_virtual is %p\n", sep->rar_addr); |
| |
| #if !SEP_DRIVER_POLLING_MODE |
| |
| edbg("SEP Driver: about to write IMR and ICR REG_ADDR\n"); |
| |
| /* clear ICR register */ |
| sep_write_reg(sep, HW_HOST_ICR_REG_ADDR, 0xFFFFFFFF); |
| |
| /* set the IMR register - open only GPR 2 */ |
| sep_write_reg(sep, HW_HOST_IMR_REG_ADDR, (~(0x1 << 13))); |
| |
| edbg("SEP Driver: about to call request_irq\n"); |
| /* get the interrupt line */ |
| error = request_irq(pdev->irq, sep_inthandler, IRQF_SHARED, "sep_driver", sep); |
| if (error) |
| goto end_function_free_res; |
| return 0; |
| edbg("SEP Driver: about to write IMR REG_ADDR"); |
| |
| /* set the IMR register - open only GPR 2 */ |
| sep_write_reg(sep, HW_HOST_IMR_REG_ADDR, (~(0x1 << 13))); |
| |
| end_function_free_res: |
| dma_free_coherent(&sep->pdev->dev, 2 * SEP_RAR_IO_MEM_REGION_SIZE, |
| sep->rar_addr, sep->rar_bus); |
| #endif /* SEP_DRIVER_POLLING_MODE */ |
| end_function_uniomap: |
| iounmap(sep->reg_addr); |
| end_function_deallocate_sep_shared_area: |
| /* de-allocate shared area */ |
| sep_unmap_and_free_shared_area(sep, size); |
| end_function_error: |
| sep_dev = NULL; |
| end_function: |
| return error; |
| } |
| |
| static const struct pci_device_id sep_pci_id_tbl[] = { |
| {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x080c)}, |
| {0} |
| }; |
| |
| MODULE_DEVICE_TABLE(pci, sep_pci_id_tbl); |
| |
| /* field for registering driver to PCI device */ |
| static struct pci_driver sep_pci_driver = { |
| .name = "sep_sec_driver", |
| .id_table = sep_pci_id_tbl, |
| .probe = sep_probe |
| /* FIXME: remove handler */ |
| }; |
| |
| /* major and minor device numbers */ |
| static dev_t sep_devno; |
| |
| /* the files operations structure of the driver */ |
| static struct file_operations sep_file_operations = { |
| .owner = THIS_MODULE, |
| .unlocked_ioctl = sep_ioctl, |
| .poll = sep_poll, |
| .open = sep_open, |
| .release = sep_release, |
| .mmap = sep_mmap, |
| }; |
| |
| |
| /* cdev struct of the driver */ |
| static struct cdev sep_cdev; |
| |
| /* |
| this function registers the driver to the file system |
| */ |
| static int sep_register_driver_to_fs(void) |
| { |
| int ret_val = alloc_chrdev_region(&sep_devno, 0, 1, "sep_sec_driver"); |
| if (ret_val) { |
| edbg("sep: major number allocation failed, retval is %d\n", |
| ret_val); |
| return ret_val; |
| } |
| /* init cdev */ |
| cdev_init(&sep_cdev, &sep_file_operations); |
| sep_cdev.owner = THIS_MODULE; |
| |
| /* register the driver with the kernel */ |
| ret_val = cdev_add(&sep_cdev, sep_devno, 1); |
| if (ret_val) { |
| edbg("sep_driver:cdev_add failed, retval is %d\n", ret_val); |
| /* unregister dev numbers */ |
| unregister_chrdev_region(sep_devno, 1); |
| } |
| return ret_val; |
| } |
| |
| |
| /*-------------------------------------------------------------- |
| init function |
| ----------------------------------------------------------------*/ |
| static int __init sep_init(void) |
| { |
| int ret_val = 0; |
| dbg("SEP Driver:-------->Init start\n"); |
| /* FIXME: Probe can occur before we are ready to survive a probe */ |
| ret_val = pci_register_driver(&sep_pci_driver); |
| if (ret_val) { |
| edbg("sep_driver:sep_driver_to_device failed, ret_val is %d\n", ret_val); |
| goto end_function_unregister_from_fs; |
| } |
| /* register driver to fs */ |
| ret_val = sep_register_driver_to_fs(); |
| if (ret_val) |
| goto end_function_unregister_pci; |
| goto end_function; |
| end_function_unregister_pci: |
| pci_unregister_driver(&sep_pci_driver); |
| end_function_unregister_from_fs: |
| /* unregister from fs */ |
| cdev_del(&sep_cdev); |
| /* unregister dev numbers */ |
| unregister_chrdev_region(sep_devno, 1); |
| end_function: |
| dbg("SEP Driver:<-------- Init end\n"); |
| return ret_val; |
| } |
| |
| |
| /*------------------------------------------------------------- |
| exit function |
| --------------------------------------------------------------*/ |
| static void __exit sep_exit(void) |
| { |
| int size; |
| |
| dbg("SEP Driver:--------> Exit start\n"); |
| |
| /* unregister from fs */ |
| cdev_del(&sep_cdev); |
| /* unregister dev numbers */ |
| unregister_chrdev_region(sep_devno, 1); |
| /* calculate the total size for de-allocation */ |
| size = SEP_DRIVER_MESSAGE_SHARED_AREA_SIZE_IN_BYTES + |
| SEP_DRIVER_SYNCHRONIC_DMA_TABLES_AREA_SIZE_IN_BYTES + SEP_DRIVER_DATA_POOL_SHARED_AREA_SIZE_IN_BYTES + SEP_DRIVER_FLOW_DMA_TABLES_AREA_SIZE_IN_BYTES + SEP_DRIVER_STATIC_AREA_SIZE_IN_BYTES + SEP_DRIVER_SYSTEM_DATA_MEMORY_SIZE_IN_BYTES; |
| /* FIXME: We need to do this in the unload for the device */ |
| /* free shared area */ |
| if (sep_dev) { |
| sep_unmap_and_free_shared_area(sep_dev, size); |
| edbg("SEP Driver: free pages SEP SHARED AREA \n"); |
| iounmap((void *) sep_dev->reg_addr); |
| edbg("SEP Driver: iounmap \n"); |
| } |
| edbg("SEP Driver: release_mem_region \n"); |
| dbg("SEP Driver:<-------- Exit end\n"); |
| } |
| |
| |
| module_init(sep_init); |
| module_exit(sep_exit); |
| |
| MODULE_LICENSE("GPL"); |