| /* |
| * Device Tree Source for IBM/AMCC Taishan |
| * |
| * Copyright 2007 IBM Corp. |
| * Hugh Blemings <hugh@au.ibm.com> based off code by |
| * Josh Boyer <jwboyer@linux.vnet.ibm.com>, David Gibson <dwg@au1.ibm.com> |
| * |
| * This file is licensed under the terms of the GNU General Public |
| * License version 2. This program is licensed "as is" without |
| * any warranty of any kind, whether express or implied. |
| */ |
| |
| / { |
| #address-cells = <2>; |
| #size-cells = <1>; |
| model = "amcc,taishan"; |
| compatible = "amcc,taishan"; |
| dcr-parent = <&/cpus/cpu@0>; |
| |
| aliases { |
| ethernet0 = &EMAC2; |
| ethernet1 = &EMAC3; |
| serial0 = &UART0; |
| serial1 = &UART1; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu@0 { |
| device_type = "cpu"; |
| model = "PowerPC,440GX"; |
| reg = <0>; |
| clock-frequency = <2FAF0800>; // 800MHz |
| timebase-frequency = <0>; // Filled in by zImage |
| i-cache-line-size = <32>; |
| d-cache-line-size = <32>; |
| i-cache-size = <8000>; /* 32 kB */ |
| d-cache-size = <8000>; /* 32 kB */ |
| dcr-controller; |
| dcr-access-method = "native"; |
| }; |
| }; |
| |
| memory { |
| device_type = "memory"; |
| reg = <0 0 0>; // Filled in by zImage |
| }; |
| |
| |
| UICB0: interrupt-controller-base { |
| compatible = "ibm,uic-440gx", "ibm,uic"; |
| interrupt-controller; |
| cell-index = <3>; |
| dcr-reg = <200 009>; |
| #address-cells = <0>; |
| #size-cells = <0>; |
| #interrupt-cells = <2>; |
| }; |
| |
| |
| UIC0: interrupt-controller0 { |
| compatible = "ibm,uic-440gx", "ibm,uic"; |
| interrupt-controller; |
| cell-index = <0>; |
| dcr-reg = <0c0 009>; |
| #address-cells = <0>; |
| #size-cells = <0>; |
| #interrupt-cells = <2>; |
| interrupts = <01 4 00 4>; /* cascade - first non-critical */ |
| interrupt-parent = <&UICB0>; |
| |
| }; |
| |
| UIC1: interrupt-controller1 { |
| compatible = "ibm,uic-440gx", "ibm,uic"; |
| interrupt-controller; |
| cell-index = <1>; |
| dcr-reg = <0d0 009>; |
| #address-cells = <0>; |
| #size-cells = <0>; |
| #interrupt-cells = <2>; |
| interrupts = <03 4 02 4>; /* cascade */ |
| interrupt-parent = <&UICB0>; |
| }; |
| |
| UIC2: interrupt-controller2 { |
| compatible = "ibm,uic-440gx", "ibm,uic"; |
| interrupt-controller; |
| cell-index = <2>; /* was 1 */ |
| dcr-reg = <210 009>; |
| #address-cells = <0>; |
| #size-cells = <0>; |
| #interrupt-cells = <2>; |
| interrupts = <05 4 04 4>; /* cascade */ |
| interrupt-parent = <&UICB0>; |
| }; |
| |
| |
| CPC0: cpc { |
| compatible = "ibm,cpc-440gp"; |
| dcr-reg = <0b0 003 0e0 010>; |
| // FIXME: anything else? |
| }; |
| |
| plb { |
| compatible = "ibm,plb-440gx", "ibm,plb4"; |
| #address-cells = <2>; |
| #size-cells = <1>; |
| ranges; |
| clock-frequency = <9896800>; // 160MHz |
| |
| SDRAM0: memory-controller { |
| compatible = "ibm,sdram-440gp"; |
| dcr-reg = <010 2>; |
| // FIXME: anything else? |
| }; |
| |
| SRAM0: sram { |
| compatible = "ibm,sram-440gp"; |
| dcr-reg = <020 8 00a 1>; |
| }; |
| |
| DMA0: dma { |
| // FIXME: ??? |
| compatible = "ibm,dma-440gp"; |
| dcr-reg = <100 027>; |
| }; |
| |
| MAL0: mcmal { |
| compatible = "ibm,mcmal-440gx", "ibm,mcmal2"; |
| dcr-reg = <180 62>; |
| num-tx-chans = <4>; |
| num-rx-chans = <4>; |
| interrupt-parent = <&MAL0>; |
| interrupts = <0 1 2 3 4>; |
| #interrupt-cells = <1>; |
| #address-cells = <0>; |
| #size-cells = <0>; |
| interrupt-map = </*TXEOB*/ 0 &UIC0 a 4 |
| /*RXEOB*/ 1 &UIC0 b 4 |
| /*SERR*/ 2 &UIC1 0 4 |
| /*TXDE*/ 3 &UIC1 1 4 |
| /*RXDE*/ 4 &UIC1 2 4>; |
| interrupt-map-mask = <ffffffff>; |
| }; |
| |
| POB0: opb { |
| compatible = "ibm,opb-440gx", "ibm,opb"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| /* Wish there was a nicer way of specifying a full 32-bit |
| range */ |
| ranges = <00000000 1 00000000 80000000 |
| 80000000 1 80000000 80000000>; |
| dcr-reg = <090 00b>; |
| interrupt-parent = <&UIC1>; |
| interrupts = <7 4>; |
| clock-frequency = <4C4B400>; // 80MHz |
| |
| |
| EBC0: ebc { |
| compatible = "ibm,ebc-440gx", "ibm,ebc"; |
| dcr-reg = <012 2>; |
| #address-cells = <2>; |
| #size-cells = <1>; |
| clock-frequency = <4C4B400>; // 80MHz |
| |
| /* ranges property is supplied by zImage |
| * based on firmware's configuration of the |
| * EBC bridge */ |
| |
| interrupts = <5 4>; |
| interrupt-parent = <&UIC1>; |
| |
| /* TODO: Add other EBC devices */ |
| }; |
| |
| |
| |
| UART0: serial@40000200 { |
| device_type = "serial"; |
| compatible = "ns16550"; |
| reg = <40000200 8>; |
| virtual-reg = <e0000200>; |
| clock-frequency = <A8C000>; |
| current-speed = <1C200>; /* 115200 */ |
| interrupt-parent = <&UIC0>; |
| interrupts = <0 4>; |
| }; |
| |
| UART1: serial@40000300 { |
| device_type = "serial"; |
| compatible = "ns16550"; |
| reg = <40000300 8>; |
| virtual-reg = <e0000300>; |
| clock-frequency = <A8C000>; |
| current-speed = <1C200>; /* 115200 */ |
| interrupt-parent = <&UIC0>; |
| interrupts = <1 4>; |
| }; |
| |
| IIC0: i2c@40000400 { |
| /* FIXME */ |
| compatible = "ibm,iic-440gp", "ibm,iic"; |
| reg = <40000400 14>; |
| interrupt-parent = <&UIC0>; |
| interrupts = <2 4>; |
| }; |
| IIC1: i2c@40000500 { |
| /* FIXME */ |
| compatible = "ibm,iic-440gp", "ibm,iic"; |
| reg = <40000500 14>; |
| interrupt-parent = <&UIC0>; |
| interrupts = <3 4>; |
| }; |
| |
| GPIO0: gpio@40000700 { |
| /* FIXME */ |
| compatible = "ibm,gpio-440gp"; |
| reg = <40000700 20>; |
| }; |
| |
| ZMII0: emac-zmii@40000780 { |
| compatible = "ibm,zmii-440gx", "ibm,zmii"; |
| reg = <40000780 c>; |
| }; |
| |
| RGMII0: emac-rgmii@40000790 { |
| compatible = "ibm,rgmii"; |
| reg = <40000790 8>; |
| }; |
| |
| |
| EMAC0: ethernet@40000800 { |
| unused = <1>; |
| linux,network-index = <2>; |
| device_type = "network"; |
| compatible = "ibm,emac-440gx", "ibm,emac4"; |
| interrupt-parent = <&UIC1>; |
| interrupts = <1c 4 1d 4>; |
| reg = <40000800 70>; |
| local-mac-address = [000000000000]; // Filled in by zImage |
| mal-device = <&MAL0>; |
| mal-tx-channel = <0>; |
| mal-rx-channel = <0>; |
| cell-index = <0>; |
| max-frame-size = <5dc>; |
| rx-fifo-size = <1000>; |
| tx-fifo-size = <800>; |
| phy-mode = "rmii"; |
| phy-map = <00000001>; |
| zmii-device = <&ZMII0>; |
| zmii-channel = <0>; |
| }; |
| EMAC1: ethernet@40000900 { |
| unused = <1>; |
| linux,network-index = <3>; |
| device_type = "network"; |
| compatible = "ibm,emac-440gx", "ibm,emac4"; |
| interrupt-parent = <&UIC1>; |
| interrupts = <1e 4 1f 4>; |
| reg = <40000900 70>; |
| local-mac-address = [000000000000]; // Filled in by zImage |
| mal-device = <&MAL0>; |
| mal-tx-channel = <1>; |
| mal-rx-channel = <1>; |
| cell-index = <1>; |
| max-frame-size = <5dc>; |
| rx-fifo-size = <1000>; |
| tx-fifo-size = <800>; |
| phy-mode = "rmii"; |
| phy-map = <00000001>; |
| zmii-device = <&ZMII0>; |
| zmii-channel = <1>; |
| }; |
| |
| EMAC2: ethernet@40000c00 { |
| linux,network-index = <0>; |
| device_type = "network"; |
| compatible = "ibm,emac-440gx", "ibm,emac4"; |
| interrupt-parent = <&UIC2>; |
| interrupts = <0 4 1 4>; |
| reg = <40000c00 70>; |
| local-mac-address = [000000000000]; // Filled in by zImage |
| mal-device = <&MAL0>; |
| mal-tx-channel = <2>; |
| mal-rx-channel = <2>; |
| cell-index = <2>; |
| max-frame-size = <5dc>; |
| rx-fifo-size = <1000>; |
| tx-fifo-size = <800>; |
| phy-mode = "rgmii"; |
| phy-map = <00000001>; |
| rgmii-device = <&RGMII0>; |
| rgmii-channel = <0>; |
| zmii-device = <&ZMII0>; |
| zmii-channel = <2>; |
| }; |
| |
| EMAC3: ethernet@40000e00 { |
| linux,network-index = <1>; |
| device_type = "network"; |
| compatible = "ibm,emac-440gx", "ibm,emac4"; |
| interrupt-parent = <&UIC2>; |
| interrupts = <2 4 3 4>; |
| reg = <40000e00 70>; |
| local-mac-address = [000000000000]; // Filled in by zImage |
| mal-device = <&MAL0>; |
| mal-tx-channel = <3>; |
| mal-rx-channel = <3>; |
| cell-index = <3>; |
| max-frame-size = <5dc>; |
| rx-fifo-size = <1000>; |
| tx-fifo-size = <800>; |
| phy-mode = "rgmii"; |
| phy-map = <00000003>; |
| rgmii-device = <&RGMII0>; |
| rgmii-channel = <1>; |
| zmii-device = <&ZMII0>; |
| zmii-channel = <3>; |
| }; |
| |
| |
| GPT0: gpt@40000a00 { |
| /* FIXME */ |
| reg = <40000a00 d4>; |
| interrupt-parent = <&UIC0>; |
| interrupts = <12 4 13 4 14 4 15 4 16 4>; |
| }; |
| |
| }; |
| |
| PCIX0: pci@20ec00000 { |
| device_type = "pci"; |
| #interrupt-cells = <1>; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| compatible = "ibm,plb440gp-pcix", "ibm,plb-pcix"; |
| primary; |
| large-inbound-windows; |
| enable-msi-hole; |
| reg = <2 0ec00000 8 /* Config space access */ |
| 0 0 0 /* no IACK cycles */ |
| 2 0ed00000 4 /* Special cycles */ |
| 2 0ec80000 100 /* Internal registers */ |
| 2 0ec80100 fc>; /* Internal messaging registers */ |
| |
| /* Outbound ranges, one memory and one IO, |
| * later cannot be changed |
| */ |
| ranges = <02000000 0 80000000 00000003 80000000 0 80000000 |
| 01000000 0 00000000 00000002 08000000 0 00010000>; |
| |
| /* Inbound 2GB range starting at 0 */ |
| dma-ranges = <42000000 0 0 0 0 0 80000000>; |
| |
| interrupt-map-mask = <f800 0 0 7>; |
| interrupt-map = < |
| /* IDSEL 1 */ |
| 0800 0 0 1 &UIC0 17 8 |
| 0800 0 0 2 &UIC0 18 8 |
| 0800 0 0 3 &UIC0 19 8 |
| 0800 0 0 4 &UIC0 1a 8 |
| |
| /* IDSEL 2 */ |
| 1000 0 0 1 &UIC0 18 8 |
| 1000 0 0 2 &UIC0 19 8 |
| 1000 0 0 3 &UIC0 1a 8 |
| 1000 0 0 4 &UIC0 17 8 |
| >; |
| }; |
| }; |
| |
| chosen { |
| linux,stdout-path = "/plb/opb/serial@40000300"; |
| }; |
| }; |